Development of XRMF techniques for measurement of multi-layer film thicknesses on semiconductors for VLSI and ULSI integrated circuits. Final CRADA report for CRADA number Y-1292-0130

International Nuclear Information System (INIS)

Carpenter, D.A.; Golijanin, D.L.; Wherry, D.

1997-01-01

A CRADA with Kevex Instruments was carried out to develop improved XRMF instrumentation for the nondestructive analysis of electronic components during manufacture. Experiments conducted at Y-12 proved the feasibility of a new Kevex x-ray tube design. Tests also show that the current commercial supply of straight glass capillaries is unreliable; however, other vendors of tapered single and multiple glass capillaries were identified. The stability of the Y-12 x-ray microprobe was significantly enhanced as a result of this CRADA

Development of an X-Ray Catheter Final Report CRADA No. TC-1265-96

Energy Technology Data Exchange (ETDEWEB)

Trebes, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Schlossberg, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-11-01

Toe goal of this CRADA project was to develop a catheter-based x-ray source to provide treatment of restenosis in arteries with a radiation source which can be precisely controlled and turned on and off at will.

CRADA Final Report for CRADA No. ORNL99-0544, Interfacial Properties of Electron Beam Cured Composites

Energy Technology Data Exchange (ETDEWEB)

Janke, C.J.

2005-10-17

Electron beam (EB) curing is a technology that promises, in certain applications, to deliver lower cost and higher performance polymer matrix composite (PMC) structures compared to conventional thermal curing processes. PMCs enhance performance by making products lighter, stronger, more durable, and less energy demanding. They are essential in weight- and performance-dominated applications. Affordable PMCs can enhance US economic prosperity and national security. US industry expects rapid implementation of electron beam cured composites in aircraft and aerospace applications as satisfactory properties are demonstrated, and implementation in lower performance applications will likely follow thereafter. In fact, at this time and partly because of discoveries made in this project, field demonstrations are underway that may result in the first fielded applications of electron beam cured composites. Serious obstacles preventing the widespread use of electron beam cured PMCs in many applications are their relatively poor interfacial properties and resin toughness. The composite shear strength and resin toughness of electron beam cured carbon fiber reinforced epoxy composites were about 25% and 50% lower, respectively, than those of thermally cured composites of similar formulations. The essential purpose of this project was to improve the mechanical properties of electron beam cured, carbon fiber reinforced epoxy composites, with a specific focus on composite shear properties for high performance aerospace applications. Many partners, sponsors, and subcontractors participated in this project. There were four government sponsors from three federal agencies, with the US Department of Energy (DOE) being the principal sponsor. The project was executed by Oak Ridge National Laboratory (ORNL), NASA and Department of Defense (DOD) participants, eleven private CRADA partners, and two subcontractors. A list of key project contacts is provided in Appendix A. In order to properly

Nano-Filament Field Emission Cathode Development Final Report CRADA No. TSB-0731-93

Energy Technology Data Exchange (ETDEWEB)

Bernhardt, Tony [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Fahlen, Ted [Candescent Technologies Corporation, San Jose, CA (United States)

2018-01-17

At the time the CRADA was established, Silicon Video Corporation, of Cupertino, CA was a one-year-old rapidly growing start-up company. SVC was developing flat panel displays (FPDs) to replace Cathode Ray Terminals (CRTs) for personal computers, work stations and televisions. They planned to base their products on low cost and energy efficient field emission technology. It was universally recognized that the display was both the dominant cost item and differentiating feature of many products such as laptop computers and hand-held electronics and that control of the display technology through U.S. sources was essential to success in these markets. The purpose of this CRADA project was to determine if electrochemical planarization would be a viable, inexpensive alternative to current optical polishing techniques for planarizing the surface of a ceramic backplate of a thin film display.

Non-Invasive Pneumothorax Detector Final Report CRADA No. TC02110.0

Energy Technology Data Exchange (ETDEWEB)

Chang, J. T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Purcell, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-08-29

This was a collaborative effort between Lawrence Livermore National Security, LLC as manager and operator of Lawrence Livermore National Laboratory (LLNL) and ElectroSonics Medical Inc. (formerly known as BIOMEC, Inc.), to develop a non-invasive pneumothorax detector based upon the micropower impulse radar technology invented at LLNL. Under a Work for Others Subcontract (L-9248), LLNL and ElectroSonics successfully demonstrated the feasibility of a novel device for non-invasive detection of pneumothorax for emergency and long-term monitoring. The device is based on Micropower Impulse Radar (MIR) Ultra Wideband (UWB) technology. Phase I experimental results were promising, showing that a pneumothorax volume even as small as 30 ml was clearly detectable from the MIR signals. Phase I results contributed to the award of a National Institute of Health (NIH) SBIR Phase II grant to support further research and development. The Phase II award led to the establishment of a LLNL/ElectroSonics CRADA related to Case No. TC02045.0. Under the subsequent CRADA, LLNL and ElectroSonics successfully demonstrated the feasibility of the pneumothorax detection in human subject research trials. Under this current CRADA TC02110.0, also referred to as Phase II Type II, the project scope consisted of seven tasks in Project Year 1; five tasks in Project Year 2; and four tasks in Project Year 3. Year 1 tasks were aimed toward the delivery of the pneumothorax detector design package for the pre-production of the miniaturized CompactFlash dockable version of the system. The tasks in Project Years 2 and 3 critically depended upon the accomplishments of Task 1. Since LLNL’s task was to provide subject matter expertise and performance verification, much of the timeline of engagement by the LLNL staff depended upon the overall project milestones as determined by the lead organization ElectroSonics. The scope of efforts were subsequently adjusted accordingly to commensurate with funding

Pulsed Plasma Processing of Diesel Engine Exhaust Final Report CRADA No. TC-0336-92-1-C

Energy Technology Data Exchange (ETDEWEB)

Merritt, Bernard T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Broering, Louis [Cummins Engine Company, Inc., Columbus, IN (United States)

2017-11-09

The goal was to develop an exhaust-gas treatment process for the reduction of NO_x and hydrocarbon from diesel engines. The project began believing that direct chemical reduction on NO_x was possible through the use of non-thermal plasmas. The original CRADA began in 1993 and was scheduled to finish in 1996. It had as its goals three metrics: 1) remove two grams/brake-horse-power-hour of NOx, 2) have no more than five percent energy penalty, and 3) cost no more than ten percent of the engine cost. These goals were all aimed at heavy-duty diesel trucks. This CRADA had its Defense Program funding eliminated by DOE prior to completion in 1995. Prior to loss of funding from DOE, LLNL discovered that due to the large oxygen content in diesel exhaust, direct chemical reduction was not possible. In understanding why, a breakthrough was achieved that combined the use of a non-thermal plasma and a catalyst. This process was named Plasma Assisted Catalytic Reduction (P ACR). Because of this breakthrough, the CRADA became a funds-in only CRADA, once DOE DP funding ended. As a result, the funding decreased from about 1M dollars per year to about $400k per year. Subsequently, progress slowed as well. The CRADA was amended several times to reflect the funds-in nature. At each amendment, the deliverables were modified; the goals remained the same but the focus changed from heavy-duty to lightduty to SUVs. The diesel-engine NO_x problem is similar to the furnace and boiler NO_x emission problem with the added constraint that ammonia-like additives are impractical for a mobile source. Lean-burning gasoline engines are an additional area of application because the standard three-way catalyst is rendered ineffective by the presence of oxygen. In the P ACR process an electrical discharge is used to create a non-thermal plasma that contains oxidative radicals O and OH. These oxidative radicals convert NO to NO₂. Selective catalytic

Complex Multi-Chamber Airbag Performance Simulation Final Report CRADA No. TSB-961-94

Energy Technology Data Exchange (ETDEWEB)

Kay, Gregory [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kithil, Philip [Advanced Safety Concepts, Inc. (ASCI), Santa Fe, NM (United States)

2018-01-22

The purpose of this small business CRADA was to evaluate the performance of new airbag concepts which were developed by the Advanced Safety Concepts, Inc. (ASCI). These new airbag concepts, if successful, could have major potential savings to society in terms of fewer injuries, lost time and lives.

Application of a Barrier Filter at a High Purity Synthetic Graphite Plant, CRADA 99-F035, Final Report

Energy Technology Data Exchange (ETDEWEB)

National Energy Technology Laboratory

2000-08-31

Superior Graphite Company and the US Department of Energy have entered into a Cooperative Research and Development Agreement (CRADA) to study the application of ceramic barrier filters at its Hopkinsville, Kentucky graphite plant. Superior Graphite Company is a worldwide leader in the application of advanced thermal processing technology to produce high purity graphite and carbons. The objective of the CRADA is to determine the technical and economic feasibility of incorporating the use of high-temperature filters to improve the performance of the offgas treatment system. A conceptual design was developed incorporating the ceramic filters into the offgas treatment system to be used for the development of a capital cost estimate and economic feasibility assessment of this technology for improving particulate removal. This CRADA is a joint effort of Superior Graphite Company, Parsons Infrastructure and Technology Group, and the National Energy Technology Laboratory (NETL) of the US Department of Energy (DOE).

Trinitromethyl Heterocyclic Oxidizers as a Solid Propellant Ingredient Final Report CRADA No TC02146.0

Energy Technology Data Exchange (ETDEWEB)

Pagoria, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Racoveanu, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-08-15

This was a collaborative effort between Lawrence Livermore National Security, LLC as manager and operator of Lawrence Livermore National Laboratory (LLNL) and Physical Sciences, Inc. (PSI), to develop a synthesis of two novel energetic heterocyclic oxidizers as possible replacements for ammonium perchlorate (AP) in rocket propellant formulations. This CRADA resulted from the award of the Phase I Small Business Technology Transfer (STTR) from DOD. The CRADA consisted of two phases. The goal for Phase 1 was to produce a new oxidizer called TNMDNP. Phase 2 is optional (based on the success of Phase 1) and the goal of Phase 2 (optional) was to produce a new oxidizer called TNMDNT. Phase 2 tasks would be performed based on the successful results of Phase 1.

Mobile Ocean Test Berth Support: Cooperative Research and Development Final Report, CRADA Number CRD-10-413

Energy Technology Data Exchange (ETDEWEB)

LiVecchi, Albert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2015-12-01

The Northwest National Marine Renewable Energy Center (NNMREC), headquartered at the Oregon State University, is establishing the capabilities to test prototype wave energy conversion devices in the ocean. This CRADA will leverage the technical expertise and resources at NREL in the wind industry and in ocean engineering to support and enhance the development of the NNMREC Mobile Ocean Test Berth (MOTB). This CRADA will provide direct support to NNMREC by providing design evaluation and review of the MOTB, developing effective protocols for testing of the MOTB and wave energy conversion devices in the ocean, assisting in the specification of appropriate instrumentation and data acquisition packages, and providing guidance on obtaining and maintaining A2LA (American Association for Laboratory Accreditation) accreditation.

Data summary report for M.W. Kellogg Z-sorb sorbent tests. CRADA 92-008 Final report

Energy Technology Data Exchange (ETDEWEB)

Everett, C E; Monaco, S J

1994-05-01

A series of tests were undertaken from August 6, 1992 through July 6, 1993 at METC`s High Pressure Bench-Scale Hot Gas Desulfurization Unit to support a Cooperative Research and Development Agreement (CRADA) between METC`s Sorbent Development Cluster and M.W. Kellogg. The M.W. Kellogg Company is currently developing a commercial offering of a hot gas clean-up system to be used in Integrated Gasification Combined Cycle (IGCC) systems. The intent of the CRADA agreement was to identify a suitable zinc-based desulfurization sorbent for the Sierra Pacific Power Company Clean Coal Technology Project, to identify optimum operating conditions for the sorbent, and to estimate potential sorbent loss per year. This report presents results pertaining to Phillips Petroleum`s Z-Sorb III sorbent.

Development of a Multi-Sensor Cancer Detection Probe Final Report CRADA No. TC-2026-01

Energy Technology Data Exchange (ETDEWEB)

Marion, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hular, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-16

This collaboration continued work started under a previous CRADA (TSB-2023-00) to take a detailed concept specification for a multi-sensor needle/probe suitable for breast cancer analysis and produce a prototype system suitable for human FDA trials.

Optical Mode Converters Final Report CRADA No. TC-0838-94

Energy Technology Data Exchange (ETDEWEB)

Pocha, Michael D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Carey, Kent [Hewlett-Packard Company, Palo Alto, CA (United States). Agilent Technologies

2017-11-09

The information age was maturing, and photonics was emerging as a significant technology with important'national security and commercial implications at the time of the CRADA. This was largely due to the vast information carrying capacity of optical beams and the availability of cheap.and effective optical fiber waveguides to guide the light. However, a major limitation to the widespread deployment of photonic systems was the high-cost (in an economic and performance sense) associated with coupling optical power between optoelectronic waveguide devices or between a device and an optical fiber. The problem was critical in the case of single-mode waveguide devices. Mitigating these costs would be a significant and pervasive enabler of the technology for a wide variety of applications that would have crucial defense and economic impact. The partners worked together to develop optical mode size converters on silicon substrates. Silicon was chosen because of its compatibility with the required photolithographic and micromachining techniques. By choosing silicon, these techniques could enable the close coupling of high-speed, high density silicon electronic circuitry to efficient low-cost photonics. The efficient coupling of electronics and photonics technologies would be important for many information age technologies. The joint nature of this project was intended to allow HP to benefit from some unique LLNL capabilities, and LLNL would be in a position to learn from HP and enhance its value to fundamental DP missions. Although the CRADA began as a hardware development project to develop the mode converter, it evolved into a software development venture. LLNL and HP researchers examined literature, performed some preliminary calculations, and evaluated production trade-offs of several known techniques to determine the best candidates for an integrated system.

Electrical Resistance Tomography for Subsurface Imaging Final Report CRADA No. TC-609-93

Energy Technology Data Exchange (ETDEWEB)

Daily, William [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Mondt, William [RIMtech, Inc., Westminster, CO (United States)

2018-01-22

The purpose of this CRADA was to develop a useful and commercially viable version of ERT technology for use in the oil, mining, engineering, and geotechnical industries. The goals required to accomplish these tasks included (1) developing commercial-grade data-acquisition systems and data analysis software, and (2) completing transfer of the state-of-the-art know-how, held by LLNL scientists and engineers, to personnel at RIMtech, Inc.

EnergyPlus Hysteresis PCM Model: Cooperative Research and Development Final Report, CRADA Number CRD-16-639

Energy Technology Data Exchange (ETDEWEB)

Lee, Edwin S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2018-02-22

Under the CRADA, NREL will provide assistance to NRGsim to debug and convert the EnergyPlus Hysteresis Phase Change Material ('PCM') model to C++ for adoption into the main code package of the EnergyPlus simulation engine.

CRADA Final Report for CRADA Number ORNL00-0605: Advanced Engine/Aftertreatment System R&D

Energy Technology Data Exchange (ETDEWEB)

Pihl, Josh A [ORNL; West, Brian H [ORNL; Toops, Todd J [ORNL; Adelman, Brad [Navistar; Derybowski, Edward [Navistar

2011-10-01

Navistar and ORNL established this CRADA to develop diesel engine aftertreatment configurations and control strategies that could meet emissions regulations while maintaining or improving vehicle efficiency. The early years of the project focused on reducing the fuel penalty associated with lean NOx trap (LNT), also known as NOx adsorber catalyst regeneration and desulfation. While Navistar pursued engine-based (in-cylinder) approaches to LNT regeneration, complementary experiments at ORNL focused on in-exhaust fuel injection. ORNL developed a PC-based controller for transient electronic control of EGR valve position, intake throttle position, and actuation of fuel injectors in the exhaust system of a Navistar engine installed at Oak Ridge. Aftertreatment systems consisting of different diesel oxidation catalysts (DOCs) in conjunction with a diesel particle filter and LNT were evaluated under quasi-steady-state conditions. Hydrocarbon (HC) species were measured at multiple locations in the exhaust system with Gas chromatograph mass spectrometry (GC-MS) and Fourier transform infrared (FTIR) spectroscopy. Under full-load, rated speed conditions, injection of fuel upstream of the DOC reduced the fuel penalty for a given level of NOx reduction by 10-20%. GC-MS showed that fuel compounds were 'cracked' into smaller hydrocarbon species over the DOC, particularly light alkenes. GC-MS analysis of HC species entering and exiting the LNT showed high utilization of light alkenes, followed by mono-aromatics; branched alkanes passed through the LNT largely unreacted. Follow-on experiments at a 'road load' condition were conducted, revealing that the NOx reduction was better without the DOC at lower temperatures. The improved performance was attributed to the large swings in the NOx adsorber core temperature. Split-injection experiments were conducted with ultra-low sulfur diesel fuel and three pure HC compounds: 1-pentene, toluene, and iso-octane. The pure

CRADA Final Report for CRADA Number NFE-10-02991 "Development and Commercialization of Alternative Carbon Precursors and Conversion Technologies"

Energy Technology Data Exchange (ETDEWEB)

Norris, Rober [ORNL; Paulauskas, Felix [ORNL; Naskar, Amit [ORNL; Kaufman, Michael [ORNL; Yarborough, Ken [ORNL; Derstine, Chris [The Dow Chemical Company

2013-10-01

The overall objective of the collaborative research performed by the Oak Ridge National Laboratory (ORNL) and the Dow Chemical Company under this Cooperative Research And Development Agreement (CRADA NFE-10-02991) was to develop and establish pathways to commercialize new carbon fiber precursor and conversion technology. This technology is to produce alternative polymer fiber precursor formulations as well as scaled energy-efficient advanced conversion technology to enable continuous mode conversion to obtain carbonized fibers that are technically and economically viable in industrial markets such as transportation, wind energy, infrastructure and oil drilling applications. There have been efforts in the past to produce a low cost carbon fiber. These attempts have to be interpreted against the backdrop of the market needs at the time, which were strictly military aircraft and high-end aerospace components. In fact, manufacturing costs have been reduced from those days to current practice, where both process optimization and volume production have enabled carbon fiber to become available at prices below $20/lb. However, the requirements of the lucrative aerospace market limits further price reductions from current practice. This approach is different because specific industrial applications are targeted, most specifically wind turbine blade and light vehicle transportation, where aircraft grade carbon fiber is not required. As a result, researchers are free to adjust both manufacturing process and precursor chemistry to meet the relaxed physical specifications at a lower cost. This report documents the approach and findings of this cooperative research in alternative precursors and advanced conversion for production of cost-effective carbon fiber for energy missions. Due to export control, proprietary restrictions, and CRADA protected data considerations, specific design details and processing parameters are not included in this report.

Improved Advanced Actuated Hybrid Mirrors Final Report CRADA No. TC02130.0

Energy Technology Data Exchange (ETDEWEB)

Barbee, T. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ealey, M. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-08-25

This was a collaborative effort to develop and demonstrate an improved Advanced Actuated Hybrid Mirrors (AAHM) for commercial or Government purposes. The AAHM consists of a nanolaminate film replicating a precision optical surface bonded to a Silicon Carbide (SiC) substrate with active figure control capability. The goal of this project was to further the development of specific AAHM technologies. The intent of the CRADA was to combine the expertise of LLNL and NG Xinetics in the manufacture and test of a very high quality AAHM, incorporating lessons learned from earlier joint efforts.

Development of Personal Decontamination System Final Report CRADA No. TC-02078-04

Energy Technology Data Exchange (ETDEWEB)

Smith, W. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); O' Dell, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-09-27

This was a collaborative effort between The Regents of the University of California, Lawrence Livermore National Laboratory (LLNL) and O’Dell Engineering, Ltd. (O’Dell) to develop an improved low-cost personal decontamination system for Toxic Industrial Chemicals (TICs) and chemical agents. The significant change to the project was that COTS (Commercial Off-the Shelf Components) were identified that performed as well, or better than, the proprietary materials created and tested as part of this CRADA. These COTS components were combined to create a new LPDS (low-cost personal decontamination system) that met all specifications.

The final technical report of the CRADA, 'Medical Accelerator Technology'

International Nuclear Information System (INIS)

Chu, W.T.; Rawls, J.M.

2000-01-01

Under this CRADA, Berkeley Lab and the industry partner, General Atomics (GA), have cooperatively developed hadron therapy technologies for commercialization. Specifically, Berkeley Lab and GA jointly developed beam transport systems to bring the extracted protons from the accelerator to the treatment rooms, rotating gantries to aim the treatment beams precisely into patients from any angle, and patient positioners to align the patient accurately relative to the treatment beams. We have also jointly developed a patient treatment delivery system that controls the radiation doses in the patient, and hardware to improve the accelerator performances, including a radio-frequency ion source and its low-energy beam transport (LEBT) system. This project facilitated the commercialization of the DOE-developed technologies in hadron therapy by the private sector in order to improve the quality of life of the nation

Development of a Laser for Landmine Destruction Final Report CRADA No. TC02126.0

Energy Technology Data Exchange (ETDEWEB)

Yamamoto, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sheppard, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-08-31

This was one of two CRADAs between Lawrence Livermore National Security, LLC as manager and operator of Lawrence Livermore National Laboratory (LLNL) and First Alliance Technologies, LLC (First Alliance), to conduct research and development activity toward an integrated system for the detecting, locating, and destroying of landmines and unexploded ordinance using a laser to destroy landmines and unexploded ordinance and First Alliance’s Land Mine Locator (LML) system.

Recycling end-of-life vehicles of the future. Final CRADA report.

Energy Technology Data Exchange (ETDEWEB)

Jody, B. J.; Pomykala, J. A.; Spangenberger, J. S.; Daniels, E.; Energy Systems

2010-01-14

Argonne National Laboratory (the Contractor) entered into a Cooperative Research and Development Agreement (CRADA) with the following Participants: Vehicle Recycling Partnership, LLC (VRP, which consists of General Motors [GM], Ford, and Chrysler), and the American Chemistry Council - Plastics Division (ACC-PD). The purpose of this CRADA is to provide for the effective recycling of automotive materials. The long-term goals are to (1) enable the optimum recycling of automotive materials, thereby obviating the need for legislative mandates or directives; (2) enable the recovery of automotive materials in a cost-competitive manner while meeting the performance requirements of the applications and markets for the materials; and (3) remove recycling barriers/reasons, real or perceived, to the use of advanced lightweighting materials or systems in future vehicles. The issues, technical requirements, and cost and institutional considerations in achieving that goal are complex and will require a concerted, focused, and systematic analysis, together with a technology development program. The scope and tasks of this program are derived from 'A Roadmap for Recycling End-of-Life Vehicles of the Future,' prepared in May 2001 for the DOE Office of Energy, Efficiency, and Renewable Energy (EERE)-Vehicle Technologies Program. The objective of this research program is to enable the maximum recycling of automotive materials and obsolete vehicles through the development and commercialization of technologies for the separation and recovery of materials from end-of-life vehicles (ELVs). The long-term goals are to (1) enable the optimum recycling of automotive materials, thereby obviating the need for legislative mandates or directives; (2) enable the recovery of automotive materials in a cost-competitive manner while meeting the performance requirements of the applications and markets for the materials; and (3) remove recycling barriers/reasons, real or perceived, to the use

Hyperspectral Sensors Final Report CRADA No. TC02173.0

Energy Technology Data Exchange (ETDEWEB)

Priest, R. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sauvageau, J. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-08-30

This was a collaborative effort between Lawrence Livermore National Security, LLC as manager and operator of Lawrence Livermore National Laboratory (LLNL) and Science Applications International Corporation (SAIC), National Security Space Operations/SRBU, to develop longwave infrared (LWIR) hyperspectral imaging (HSI) sensors for airborne and potentially ground and space, platforms. LLNL has designed and developed LWIR HSI sensors since 1995. The current generation of these sensors has applications to users within the U.S. Department of Defense and the Intelligence Community. User needs are for multiple copies provided by commercial industry. To gain the most benefit from the U.S. Government’s prior investments in LWIR HSI sensors developed at LLNL, transfer of technology and know-how from LLNL HSI experts to commercial industry was needed. The overarching purpose of the CRADA project was to facilitate the transfer of the necessary technology from LLNL to SAIC thereby allowing the U.S. Government to procure LWIR HSI sensors from this company.

Development of YBCO Superconductor for Electric Systems: Cooperative Research and Development Final Report, CRADA Number CRD-04-150

Energy Technology Data Exchange (ETDEWEB)

Bhattacharya, R.

2013-03-01

The proposed project will be collaborative in exploration of high temperature superconductor oxide films between SuperPower, Inc. and the National Renewable Energy Laboratory. This CRADA will attempt to develop YBCO based high temperature oxide technology.

Proximity sensor system development. CRADA final report

Energy Technology Data Exchange (ETDEWEB)

Haley, D.C. [Oak Ridge National Lab., TN (United States); Pigoski, T.M. [Merrit Systems, Inc. (United States)

1998-01-01

Lockheed Martin Energy Research Corporation (LMERC) and Merritt Systems, Inc. (MSI) entered into a Cooperative Research and Development Agreement (CRADA) for the development and demonstration of a compact, modular proximity sensing system suitable for application to a wide class of manipulator systems operated in support of environmental restoration and waste management activities. In teleoperated modes, proximity sensing provides the manipulator operator continuous information regarding the proximity of the manipulator to objects in the workspace. In teleoperated and robotic modes, proximity sensing provides added safety through the implementation of active whole arm collision avoidance capabilities. Oak Ridge National Laboratory (ORNL), managed by LMERC for the United States Department of Energy (DOE), has developed an application specific integrated circuit (ASIC) design for the electronics required to support a modular whole arm proximity sensing system based on the use of capacitive sensors developed at Sandia National Laboratories. The use of ASIC technology greatly reduces the size of the electronics required to support the selected sensor types allowing deployment of many small sensor nodes over a large area of the manipulator surface to provide maximum sensor coverage. The ASIC design also provides a communication interface to support sensor commands from and sensor data transmission to a distributed processing system which allows modular implementation and operation of the sensor system. MSI is a commercial small business specializing in proximity sensing systems based upon infrared and acoustic sensors.

Proximity sensor system development. CRADA final report

International Nuclear Information System (INIS)

Haley, D.C.; Pigoski, T.M.

1998-01-01

Lockheed Martin Energy Research Corporation (LMERC) and Merritt Systems, Inc. (MSI) entered into a Cooperative Research and Development Agreement (CRADA) for the development and demonstration of a compact, modular proximity sensing system suitable for application to a wide class of manipulator systems operated in support of environmental restoration and waste management activities. In teleoperated modes, proximity sensing provides the manipulator operator continuous information regarding the proximity of the manipulator to objects in the workspace. In teleoperated and robotic modes, proximity sensing provides added safety through the implementation of active whole arm collision avoidance capabilities. Oak Ridge National Laboratory (ORNL), managed by LMERC for the United States Department of Energy (DOE), has developed an application specific integrated circuit (ASIC) design for the electronics required to support a modular whole arm proximity sensing system based on the use of capacitive sensors developed at Sandia National Laboratories. The use of ASIC technology greatly reduces the size of the electronics required to support the selected sensor types allowing deployment of many small sensor nodes over a large area of the manipulator surface to provide maximum sensor coverage. The ASIC design also provides a communication interface to support sensor commands from and sensor data transmission to a distributed processing system which allows modular implementation and operation of the sensor system. MSI is a commercial small business specializing in proximity sensing systems based upon infrared and acoustic sensors

Laser Materials Processing Final Report CRADA No. TC-1526-98

Energy Technology Data Exchange (ETDEWEB)

Crane, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lehane, C. J. [United Technologies Corp., East Hartford, CT (United States)

2017-09-08

This CRADA project was a joint effort between Lawrence Livermore National Laboratory (LLNL) and United Technologies Corporation (UTC)/Pratt & Whitney (P&W) to demonstrate process capability for drilling holes in turbine airfoils using LLNL-developed femtosecond laser machining technology. The basis for this development was the ability of femtosecond lasers to drill precision holes in variety of materials with little or no collateral damage. The ultimate objective was to develop a laser machine tool consisting of an extremely advanced femtosecond laser subsystem to be developed by LLNL on a best-effort basis and a drilling station for turbine blades and vanes to be developed by P&W. In addition, P&W was responsible for commercializing the system. The goal of the so called Advanced Laser Drilling (ALD) system was to drill specified complex hole-shapes in turbine blades and vanes with a high degree precision and repeatability and simultaneously capable of very high speed processing.

The Use of Vaporous Hydrogen Peroxide for Building Decontamination Final Report CRADA No. TC-2053-02

Energy Technology Data Exchange (ETDEWEB)

Verce, M. F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Schwartz, L. I. [Strategic Technology Enterprises, Inc., Mentor, OH (United States)

2017-09-08

This was a collaborative effort between LLNL and STE to investigate the use of vaporized hydrogen peroxide (VHP®) to decontaminate spore-contaminated heating, ventilation, and cooling (HV AC) systems in a trailer sized room. LLNL's effort under this CRADA was funded by DOE's Chemical and Biological National Security Program (CBNP), which later became part of Department of Homeland Security in 2004.

Scale Up of Malonic Acid Fermentation Process: Cooperative Research and Development Final Report, CRADA Number CRD-16-612

Energy Technology Data Exchange (ETDEWEB)

Schell, Daniel J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-04-16

The goal of this work is to use the large fermentation vessels in the National Renewable Energy Laboratory's (NREL) Integrated Biorefinery Research Facility (IBRF) to scale-up Lygos' biological-based process for producing malonic acid and to generate performance data. Initially, work at the 1 L scale validated successful transfer of Lygos' fermentation protocols to NREL using a glucose substrate. Outside of the scope of the CRADA with NREL, Lygos tested their process on lignocellulosic sugars produced by NREL at Lawrence Berkeley National Laboratory's (LBNL) Advanced Biofuels Process Development Unit (ABPDU). NREL produced these cellulosic sugar solutions from corn stover using a separate cellulose/hemicellulose process configuration. Finally, NREL performed fermentations using glucose in large fermentors (1,500- and 9,000-L vessels) to intermediate product and to demonstrate successful performance of Lygos' technology at larger scales.

A national laboratory/private industry cooperative research and development agreement (CRADA)

International Nuclear Information System (INIS)

Pritchard, D.A.

1996-01-01

This paper provides an overview of the history and process of establishing a cooperative research and development agreement (CRADA) between Sandia National Laboratories and Magnavox Electronic Systems Company for the design, development, and testing of a 360-degree scanning, imaging, intrusion detection sensor. The subject of the CRADA is the Advanced Exterior Sensor (AES). It is intended for exterior use at ranges from 50 to 1,500 meters and uses a combination of three sensing technologies (infrared, visible, and radar) and a new data processing method to provide low false-alarm intrusion detection and tracking combined with immediate visual assessment. The establishment of this CRADA represents a new paradigm in the cooperation between the Department of Defense, the Department of Energy, the National Laboratories and Private Industry. Although a formal document has now been executed, a CRADA is, nonetheless, primarily an agreement to work with each other to achieve goals that might otherwise be unattainable. For the DoD, a program continues in the face of uncertain funding. For the DOE, a CRADA is in place that meets congressionally mandated guidelines. For Sandia, sponsors are in agreement on requirements and synergistic funding. And for Magnavox, an opportunity is in hand to work with researchers in developing advanced security technology

Manufacturing and Characterization of Ultra Pure Ferrous Alloys Final Report CRADA No. TC02069.0

Energy Technology Data Exchange (ETDEWEB)

Lesuer, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McGreevy, T. E. [Caterpillar Inc., Mossville, IL (United States)

2017-09-06

This CRADA was a.collaborative effort between the Lawrence Livermore National Security LLC (formerly University of California)/Lawrence Livermore National Laboratory (LLNL),and Caterpillar Inc. (CaterpiHar), to further advance levitation casting techniques (developed at the Central Research Institute for Material (CRIM) in St. Petersburg, Russia) for use in manufacturing high purity metal alloys. This DOE Global Initiatives for Proliferation Prevention Program (IPP) project was to develop and demonstrate the levitation casting technology for producing ultra-pure alloys.

High Resolution Sub-MM Fiberoptic Endoscope Final Report CRADA No. TSB-1447-97

Energy Technology Data Exchange (ETDEWEB)

Stone, Gary F. [Univ. of California, Livermore, CA (United States); Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Smith, John [CML Fiberoptics, Inc., Auburn, NY (United States)

2018-01-22

At the time of the CRADA, LLNL needed to develop a sub-mm outer diameter fiberoptic endoscope with 25pm or better resolution at 3-lOmm working distance to support the Enhanced Surveillance Program (ESP) and the Core Surveillance Program for DOE. The commercially available systems did not meet the image resolution requirements and development work was needed to reach three goals. We also needed to perform preliminary investigations into the production of such an endoscope with a steerable-articulated distal end. The goal of such an endoscope was to allow for a 45 degree inspection cone including the lens field of view.

Fiber Based Optical Amplifier for High Energy Laser Pulses Final Report CRADA No. TC02100.0

Energy Technology Data Exchange (ETDEWEB)

Messerly, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Cunningham, P. [Boeing Company, Springfield, VA (United States)

2017-09-06

This was a collaborative effort between Lawrence Livermore National Security, LLC (formerly The Regents of the University of California)/Lawrence Livermore National Laboratory (LLNL), and The Boeing Company to develop an optical fiber-based laser amplifier capable of producing and sustaining very high-energy, nanosecond-scale optical pulses. The overall technical objective of this CRADA was to research, design, and develop an optical fiber-based amplifier that would meet specific metrics.

High Performance Parallel Processing (HPPP) Finite Element Simulation of Fluid Structure Interactions Final Report CRADA No. TC-0824-94-A

Energy Technology Data Exchange (ETDEWEB)

Couch, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ziegler, D. P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2018-01-24

This project was a muki-partner CRADA. This was a partnership between Alcoa and LLNL. AIcoa developed a system of numerical simulation modules that provided accurate and efficient threedimensional modeling of combined fluid dynamics and structural response.

Biodiesel/Cummins CRADA Report

Science.gov (United States)

2014-07-01

dedicated totes). This change provided uncontaminated containers to transport the delivery of biodiesel to the ANT, and better control for dosing as...emissions calculations. Each approach makes assumptions for farming practices, the biodiesel production process, and transportation and distribution... Biodiesel /Cummins CRADA Report Distribution Statement A: Approved for Public Release; distribution is unlimited. July 2014 Report

In-service testing of Ni{sub 3}Al coupons and trays in carburizing furnaces at Delphi Saginaw. CRADA final report

Energy Technology Data Exchange (ETDEWEB)

Sikka, V.K.; Santella, M.L.; Viswanathan, S.; Swindeman, R.W. [Oak Ridge National Lab., TN (United States); Chatterjee, M. [General Motors Corporaion, Saginaw Division (United States)

1998-08-01

This Cooperative Research and Development Agreement (CRADA) report deals with the development of nickel aluminide alloy for improved longer life heat-resistant fixture assemblies for batch and continuous pusher carburizing furnaces. The nickel aluminide development was compared in both coupon and component testing with the currently used Fe-Ni-Cr heat-resisting alloy known as HU. The specific goals of the CRADA were: (1) casting process development, (2) characterization and possible modification of the alloy composition to optimize its manufacturing ability and performance under typical furnace operating conditions, and (3) testing and evaluation of specimens and prototype fixtures. In support of the CRADA objectives, coupons of nickel aluminide and the HU alloy were installed in both batch and pusher furnaces. The coupons were taken from two silicon levels and contained welds made with two different filler compositions (IC-221LA and IC-221W). Both nickel-aluminide and HU coupons were removed from the batch and pusher carburizing furnace at time intervals ranging from one month to one year. The exposed coupons were cut and mounted for metallographic, hardness, and microprobe analysis. The results of the microstructural analysis have been transmitted to General Motors Corporation, Saginaw Division (Delphi Saginaw) through reports that were presented at periodic CRADA review meetings. Based on coupon testing and verification of the coupon results with the testing of trays, Delphi Saginaw moved forward with the use of six additional trays in a batch furnace and two assemblies in a pusher furnace. Fifty percent of the trays and fixtures are in the as-cast condition and the remaining trays and fixtures are in the preoxidized condition. The successful operating experience of two assemblies in the pusher furnace for nearly a year formed the basis for a production run of 63 more assemblies. The production run required melting of 94 heats weighing 500 lb. each. Twenty

Tire Development for Effective Transportation and Utilization of Used Tires, CRADA 01-N044, Final Report

Energy Technology Data Exchange (ETDEWEB)

Susan M. Maley

2004-03-31

Scrap tires represent a significant disposal and recycling challenge for the United States. Over 280 million tires are generated on an annual basis, and several states have large stockpiles or abandoned tire piles that are slated for remediation. While most states have programs to address the accumulation and generation of scrap tires, most of these states struggle with creating and sustaining recycling or beneficial end use markets. One of the major issues with market development has been the costs associated with transporting and processing the tires into material for recycling or disposal. According to a report by the Rubber Manufactures Association tire-derived fuel (TDF) represents the largest market for scrap tires, and approximately 115 million tires were consumed in 2001 as TDF (U.S. Scrap Tire Markets, 2001, December 2002, www.rma.org/scraptires). This market is supported primarily by cement kilns, followed by various industries including companies that operate utility and industrial boilers. However the use of TDF has not increased and the amount of TDF used by boiler operators has declined. The work completed through this cooperative research and development agreement (CRADA) has shown the potential of a mobile tire shredding unit to economically produce TDF and to provide an alterative low cost fuel to suitable coal-fired power systems. This novel system addresses the economic barriers by processing the tires at the retailer, thereby eliminating the costs associated with hauling whole tires. The equipment incorporated into the design allow for small 1-inch chunks of TDF to be produced in a timely fashion. The TDF can then be co-fired with coal in suitable combustion systems, such as a fluidized bed. Proper use of TDF has been shown to boost efficiency and reduce emissions from power generation systems, which is beneficial to coal utilization in existing power plants. Since the original scope of work outlined in the CRADA could not be completed because

Final Project Report Project 10749-4.2.2.1 2007-2009

Energy Technology Data Exchange (ETDEWEB)

Zacher, Alan H.; Holladay, Johnathan E.; Frye, J. G.; Brown, Heather M.; Santosa, Daniel M.; Oberg, Aaron A.

2009-05-11

This is the final report for the DOE Project 10749-4.2.2.1 for the FY2007 - FY2009 period. This report is non-proprietary, and will be submitted to DOE as a final project report. The report covers activities under the DOE Project inside CRADA 269 (Project 53231) as well as project activites outside of that CRADA (Project 56662). This is the final report that is summarized from the non-proprietary quarterlies submitted to DOE over the past 2.5 years, which in turn are summaries from the proprietary technical reporting to UOP.

Low Voltage Electron Beam Processing Final Report CRADA No. TC-645-93-A

Energy Technology Data Exchange (ETDEWEB)

Chen, H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wakalopulos, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-16

This CRADA project was established to develop a small, inexpensive sealed-tube electron beam processing system having immediate applications in industrial, high speed manufacturing processes, and in the Department of Energy (DOE) waste treatment/cleanup operations. The technical work involved the development and demonstration of a compact, sealed, 50-75 kilovolt (kV) EB generator prototype, including controls and power supply. The specific goals of this project were to develop a low cost vacuum tube capable of shooting an electron beam several inches into the air, and to demonstrate that wide area materials processing is feasible by stacking the tubes to produce continuous beams. During the project, we successfully demonstrated the producibility of a low cost electron beam system and several material processing operations of interest to US industry, DOE and, since September 11, 2001, the Homeland Security.

Commercialization of Ultra-Hard Ceramics for Cutting Tools Final Report CRADA No. TC0279.0

Energy Technology Data Exchange (ETDEWEB)

Landingham, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Neumann, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-08-15

This was a collaborative effort between Lawrence Livermore National Security, LLC as manager and operator of Lawrence Livermore National Laboratory (LLNL) and Greenleaf Corporation (Greenleaf) to develop the technology for forming unique precursor nano-powders process that can be consolidated into ceramic products for industry. LLNL researchers have developed a solgel process for forming nano-ceramic powders. The nano powders are highly tailorable, allowing the explicit design of desired properties that lead to ultra hard materials with fine grain size. The present CRADA would allow the two parties to continue the development of the sol-gel process and the consolidation process in order to develop an industrially sound process for the manufacture of these ultra-hard materials.

Development of improved x-ray optics for analytical x-ray microbeams. CRADA final report for CRADA Number Y-1294-0283

International Nuclear Information System (INIS)

Carpenter, D.A.; Gao, N.; Xiao, Q.F.; Ponomarev, I.

1996-01-01

The purpose of this CRADA was to develop improved glass capillary, x-ray optics for analytical x-ray microbeam applications. X-Ray Optical Systems, Inc. (XOS) designed and fabricated capillary optics and LMES tested those optics for x-ray microanalytical applications using its unique X-Ray Microprobe. Tapered capillaries with 3-microm and 8-microm output openings were fabricated and tested. The tapered capillaries had better spectral quality for x-ray microfluorescence (XRMF) analysis, than non-tapered, straight capillaries that are currently used in the system. X-ray beam count-rates for the tapered capillaries were also greater than the straight capillaries. Two monolithic, polycapillary optics were fabricated and tested. The polycapillary optics produced focal spots of 40 and 100 microm. Beam intensities for the polycapillaries were, respective, 44 and 18 times the intensities found in straight 50-microm and 100-microm capillaries. High-sensitivity scanning will be possible because of the enhanced intensity of the polycapillary optic. LMES and the DP program will benefit from improved capabilities for nondestructive x-ray microanalysis, while XOS will benefit from test results that will enhance the marketability of their products

CRADA Payment Options | NCI Technology Transfer Center | TTC

Science.gov (United States)

NCI TTC CRADA PAYMENT OPTIONS: Electronic Payments by Wire Transfer via Fedwire, Mail a check to the Institute or Center, or Automated Clearing House (ACH)/Electronic Funds Transfer (ETF) payments via Pay.gov (NCI ONLY).

An evaluation of optical tool inspection and compensation technologies. CRADA final report for CRADA Number Y-1291-0052

Energy Technology Data Exchange (ETDEWEB)

Babelay, E.F. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Centola, J.; Zorger, W.; Serafin, W. [United Technologies, East Hartford, CT (United States). Pratt and Whitney Div.

1994-05-15

A Cooperative Research And Development Agreement (CRADA) was established April 1992 between Martin Marietta Energy Systems, Inc. and United Technologies Corporation, Pratt and Whitney Division to evaluate the existing applicability of the Energy Systems optical tool inspection and compensation system (OTICS) for use at Pratt and Whitney`s East Hartford Plant. The OTICS was developed at the Oak Ridge Y-12 Plant and optically measures the shape of a single point cutting tool. The tool shape inspection provides process information relating to tool wear and if desired the tool shape geometry can be used to generate a new numerical control machining program that is compensated for the tool forms errors. The tool wear measurement capability of OTICS was successfully evaluated in the Phase-1 testing. The testing verified that OTICS can easily detect tool wear and the {+-} 0.0001 inch resolution obtained was sufficient for the larger cutter inserts used by Pratt and Whitney (P and W). During the tool wear experiments at P and W, a second potential use identified for OTICS was the accurate on-machine dimensional verification of special ground contour forming tools. The OTICS tool path compensation experiment demonstrated the varied technologies that are integrated in the tool path compensation process. The OTICS system was successful at inspecting the 0.125 in. radius tool and compensating the tool path for tool form errors. The need for automated interfaces between the OTICS computer and controller along with the part program requirements and the overall compensation methodology were highlighted in the demonstration.

Development of Operational Free-Space-Optical (FSO) Laser Communication Systems Final Report CRADA No. TC02093.0

Energy Technology Data Exchange (ETDEWEB)

Ruggiero, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Orgren, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-08-15

This project was a collaborative effort between Lawrence Livermore National Security, LLC (formerly The Regents of the University of California)/Lawrence Livermore National Laboratory (LLNL) and LGS Innovations, LLC (formerly Lucent Technologies, Inc.), to develop long-range and mobile operational free-space optical (FSO) laser communication systems for specialized government applications. LLNL and LGS Innovations formerly Lucent Bell Laboratories Government Communications Systems performed this work for a United States Government (USG) Intelligence Work for Others (I-WFO) customer, also referred to as "Government Customer", or "Customer" and "Government Sponsor." The CRADA was a critical and required part of the LLNL technology transfer plan for the customer.

Development of HANAA to Achieve Commercialization Final Report CRADA No. TC-2025-01

Energy Technology Data Exchange (ETDEWEB)

Koopman, R. P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Schmidt, J. C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-16

The objective of this project was to provide DOD and the intelligence agencies with highly portable, advanced, bio-detection instruments and to further the DOE objective of putting advanced instrumentation for the detection of biological terrorism agents into the hands of first responders. All sponsors of the HANAA development work at LLNL believed that the technology must be commercialized to fully contribute to their missions. Intelligence organizations, military teams, and first responders must be able to purchase the instruments for a reasonable price and obtain maintenance services and support equipment from a reliable supplier in order for the instrument to be useful to them. The goal was to efficiently transfer HANAA technology from LLNL to ETG, a company that would manufacture the instrument and make it commercially available to the constituencies important to our sponsors. This was to include a current beta test instrument and all knowledge of problems with the instrument and recommendations for solving those problems in a commercial version. The following tasks were to be completed under this CRADA.

Atrial Model Development and Prototype Simulations: CRADA Final Report on Tasks 3 and 4

Energy Technology Data Exchange (ETDEWEB)

O' Hara, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zhang, X. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Villongco, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lightstone, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Richards, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-10-28

The goal of this CRADA was to develop essential tools needed to simulate human atrial electrophysiology in 3-dimensions using an anatomical image-based anatomy and physiologically detailed human cellular model. The atria were modeled as anisotropic, representing the preferentially longitudinal electrical coupling between myocytes. Across the entire anatomy, cellular electrophysiology was heterogeneous, with left and right atrial myocytes defined differently. Left and right cell types for the “control” case of sinus rhythm (SR) was compared with remodeled electrophysiology and calcium cycling characteristics of chronic atrial fibrillation (cAF). The effects of Isoproterenol (ISO), a beta-adrenergic agonist that represents the functional consequences of PKA phosphorylation of various ion channels and transporters, was also simulated in SR and cAF to represent atrial activity under physical or emotional stress. Results and findings from Tasks 3 & 4 are described. Tasks 3 and 4 are, respectively: Input parameters prepared for a Cardioid simulation; Report including recommendations for additional scenario development and post-processing analytic strategy.

High Temperature Catalytic Combustion Suppports Final Report CRADA No. TSB-0841-94

Energy Technology Data Exchange (ETDEWEB)

Hair, Lucy [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Magno, Scott [Catalytic Combustion Systems, Inc., Mountain View, CA (United States)

2018-01-19

This Small Business CRADA between LLNL and Catalytica was executed on January 25, 1995. The total estimated cost of this project was 113K. LLNL's contribution was estimated at $50K funded under the DOE/Defense Program Small Business Initiative. Catalytica's in-kind contribution was estimated at 63K. Catalytic combusion catalyst systems operate at temperatures from 600°C to above 1300°C. Catalytica has developed technology that limits the catalyst temperature to below 1000°C. At temperatures in the range of 850 to 1000°C, the thermal stability of the catalyst is an important issue. Typical supports such as stabilized aluminas, hexaluminates, zirconia and stabilized zirconia supports are typically used but lack either thermal stability or other desirable properties. Catalytica had developed a new concept for thermally stable mixed oxide supports but this concept required the preparation of molecularly uniform precursors; that is, prior to high temperature treatment of these materials, the elements that make up the mixed oxide must be as nearly uniform as possible on a molecular level. The technique of sol gel processing appeared to be the preferred technique to make these molecularly uniform precursors, and a cooperative program with LLNL was established to prepare and test the proposed compounds. Catalytica proposed the composition and concentration levels for the materials to be prepared.

Predictive Model and Methodology for Heat Treatment Distortion Final Report CRADA No. TC-298-92

Energy Technology Data Exchange (ETDEWEB)

Nikkel, D. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McCabe, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-16

This project was a multi-lab, multi-partner CRADA involving LLNL, Los Alamos National Laboratory, Sandia National Laboratories, Oak Ridge National Laboratory, Martin Marietta Energy Systems and the industrial partner, The National Center of Manufacturing Sciences (NCMS). A number of member companies of NCMS participated including General Motors Corporation, Ford Motor Company, The Torrington Company, Gear Research, the Illinois Institute of Technology Research Institute, and Deformation Control Technology •. LLNL was the lead laboratory for metrology technology used for validation of the computational tool/methodology. LLNL was also the lead laboratory for the development of the software user interface , for the computational tool. This report focuses on the participation of LLNL and NCMS. The purpose of the project was to develop a computational tool/methodology that engineers would use to predict the effects of heat treatment on the _size and shape of industrial parts made of quench hardenable alloys. Initially, the target application of the tool was gears for automotive power trains.

Assessment of Veritainer's Spreader-Bar-Mounted Radiation Detection Systems Final Report CRADA No. TC02150.0

Energy Technology Data Exchange (ETDEWEB)

Labov, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Alioto, J. I. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2012-05-29

This was a collaborative effort between Lawrence Livermore National Security, LLC as manager and operator of Lawrence Livermore National Laboratory (LLNL) and VeriTainer Corporation, to develop algorithms and testing of VeriTainer’s spreader-bar mounted radiation detection system, the VeriSpreader™. The goal of the project was to improve the VeriSpreader™ System to the point where it would meet or exceed "DOE Guidance" for radiation detection, in order to be deployed for commercial and government applications. The VeriSpreader™ had gone through several rounds of testing by DHS and DOE. NNSA had requested that VeriTainer engage in a CRADA with a national lab in order to further develop and test the VeriSpreader™ System.

Laboratory Testing of the Boundary Layer Momentum Transfer Rotational Filter Systems, NETL-Innovatech, Inc., CRADA 98-F026, Final Report; FINAL

International Nuclear Information System (INIS)

National Energy Technology Laboratory

2000-01-01

A patented dynamic mechanical filter developed by InnovaTech was previously shown to remove fine particulate matter from industrial process gas streams at ambient temperatures and pressures. An all-metal, high-temperature version of this novel media-less filter was fabricated under this Cooperative Research and Development Agreement (CRADA) with DOE/NETL-Morgantown for hot gas testing of the device. The technology is entirely different in both concept and design from conventional vortex separators, cyclones, or porous media filters. This new filtration concept is capable of separating heavy loading of fine particles without blinding, fouling or bridging, and would require minimal operational costs over its anticipated multi-year service life. The all-metal filter design eliminates thermal stress cracking and premature failure prevalent in conventional porous ceramic filters. In contrast, conventional porous media filters (i.e., ceramic cross-flow or candles) easily foul, require periodic cleaning (typically backpulsing), frequent replacement and subsequent disposal

Conversion of Indigenous Agricultural Waste Feedstocks to Fuel Ethanol. Cooperative Research and Development Final Report, CRADA Number CRD-13-504

Energy Technology Data Exchange (ETDEWEB)

Elander, Richard [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-03-27

This Cooperative Research and Development Agreement (CRADA) is between the National Renewable Energy Laboratory (NREL), a world leader in biomass conversion research and Ecopetrol American Inc., Ecopetrol S.A.'s U.S. subsidiary. The research and development efforts described in the Joint Work Statement (JWS) will take advantage of the strengths of both parties. NREL will use its Integrated Biorefinery Facility and vast experience in the conversion of lignocellulosic feedstocks to fuel ethanol to develop processes for the conversion of Ecopetrol's feedstocks. Ecopetrol will establish the infrastructure in Columbia to commercialize the conversion process.

Development of a Delivery System for Treating Cerebrovascular Aneurysms Final Report CRADA No. TC-1440-97

Energy Technology Data Exchange (ETDEWEB)

Lee, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Derbin, J. T. [Micrus Corp., Mountain View, CA (United States)

2018-01-24

The objective of the project was to develop a system for delivering an implantable medical device used to treat cerebrovascular aneurysms, which can cause disability or hemorrhagic stroke (over 15,000 strokes in the U.S. each year are caused by ruptured aneurysms). Micrus has developed an implantable device with the potential to significantly improve the treatment of cerebrovascular aneurysms. This implantable device should significantly reduce the number of hemorrhagic strokes. LLNL has performed proof-of-concept experiments for a delivery system that could be modified to deploy the Micrus device into aneurysms. The purpose of this CRADA was to complete development of the LLNL delivery system and to integrate it with the Micrus device. The goal of the project was to develop an integrated minimally-invasive medical device for treating cerebrovascular aneurysms. The device was designed to access aneurysms through commercially-available catheters which are introduced into the patient through a small incision in the leg.

Exploring synchrotron radiation capabilities: The ALS-Intel CRADA

International Nuclear Information System (INIS)

Gozzo, F.; Cossy-Favre, A.; Padmore, H.

1997-01-01

Synchrotron radiation spectroscopy and spectromicroscopy were applied, at the Advanced Light Source, to the analysis of materials and problems of interest to the commercial semiconductor industry. The authors discuss some of the results obtained at the ALS using existing capabilities, in particular the small spot ultra-ESCA instrument on beamline 7.0 and the AMS (Applied Material Science) endstation on beamline 9.3.2. The continuing trend towards smaller feature size and increased performance for semiconductor components has driven the semiconductor industry to invest in the development of sophisticated and complex instrumentation for the characterization of microstructures. Among the crucial milestones established by the Semiconductor Industry Association are the needs for high quality, defect free and extremely clean silicon wafers, very thin gate oxides, lithographies near 0.1 micron and advanced material interconnect structures. The requirements of future generations cannot be met with current industrial technologies. The purpose of the ALS-Intel CRADA (Cooperative Research And Development Agreement) is to explore, compare and improve the utility of synchrotron-based techniques for practical analysis of substrates of interest to semiconductor chip manufacturing. The first phase of the CRADA project consisted in exploring existing ALS capabilities and techniques on some problems of interest. Some of the preliminary results obtained on Intel samples are discussed here

CENER/NREL Collaboration in Testing Facility and Code Development: Cooperative Research and Development Final Report, CRADA Number CRD-06-207

Energy Technology Data Exchange (ETDEWEB)

Moriarty, P.

2014-11-01

Under the funds-in CRADA agreement, NREL and CENER will collaborate in the areas of blade and drivetrain testing facility development and code development. The project shall include NREL assisting in the review and instruction necessary to assist in commissioning the new CENER blade test and drivetrain test facilities. In addition, training will be provided by allowing CENER testing staff to observe testing and operating procedures at the NREL blade test and drivetrain test facilities. CENER and NREL will exchange blade and drivetrain facility and equipment design and performance information. The project shall also include exchanging expertise in code development and data to validate numerous computational codes.

Position and Orientation Tracking System graphical user interface. CRADA final report

International Nuclear Information System (INIS)

Barry, R.E.; Armstrong, G.A.; Burks, B.L.

1997-01-01

Under the Department of Energy's Robotics Technology Development Program (RTDP) Tank Waste Retrieval (TWR) program, a major effort is under way to develop technology for remediating the waste in underground storage tanks that contain radioactive and hazardous waste. A large part of the program's effort has gone towards development of remotely operable robotics equipment, including the Houdini Vehicle and the Position and Orientation Tracking System (POTS). Since planned operation of this equipment is to be completely remote, a significant effort is needed to ensure that operators have sufficient system information to operate the equipment efficiently and safely. ORNL developed POTS and RedZone Robotics, Inc. developed Houdini which can be operated together to provide both position and orientation descriptions of the Houdini vehicle, relative to a world reference frame, while operating inside an underground storage tank. The Houdini vehicle has been outfitted with an optical detection system that houses infrared detectors. The infrared detectors are part of the POTS tracking system. The sensors provide a set of timing pulses to the POTS control computer whenever a laser beam from one of the four POTS laser scanners strikes a detector. Using the pointing angle information from each POTS laser scanners, the POTS control computer is able to compute the pose of the Houdini vehicle at a rate of approximately 25 Hz. This information, along with the orientation of the Houdini's Schilling Titan II robot arm, is used to present the pose information to the operator in a 3-D graphical user interface using software that has been developed by this Cooperative Research and Development Agreement (CRADA). The graphical display presents the data to the operator in a format that is readily understood. The equipment operators are able to use the information in real-time to enhance the operator's ability to safely and efficiently control the remotely-operated vehicle

Advanced BorobondTM Shields for Nuclear Materials Containment and BorobondTM Immobilization of Volatile Fission Products - Final CRADA Report

International Nuclear Information System (INIS)

Wagh, Arun S.

2016-01-01

Borobond is a company-proprietary material developed by the CRADA partner in collaboration with Argonne, and is based on Argonne's Ceramicrete technology. It is being used by DOE for nuclear materials safe storage, and Boron Products, LLC is the manufacturer and supplier of Borobond. The major objective of this project was to produce a more versatile composition of this material and find new applications. Major target applications were use for nuclear radiation shields, such as in dry storage casks; use in immobilization of most difficult waste streams, such as Hanford K-Basin waste; use for soluble and volatile fission products, such as Cs, Tc, Sr, and I; and use for corrosion and fire protection applications in nuclear facilities.

Evaluation of advanced gas chromatographs for on-site analysis. Final CRADA report for number Y-1295-0374

Energy Technology Data Exchange (ETDEWEB)

Wise, M.B.; Guerin, M.R.; Palausky, A.; Merriweather, R. [Lockheed Martin Energy Research, Oak Ridge, TN (United States); Forsberg, R.E. [Mine Safety Appliances-Baseline Industries, Lyons, CO (United States)

1997-02-21

The EKHO gas chromatography (GC) is being marketed by Mine Safety Appliances as an instrument for on-site environmental analysis and for process applications. This GC utilizes a unique bundled capillary column produced in Russia that provides very fast analysis and a wide linear dynamic range. Oak Ridge National Laboratory (ORNL) has been involved in a CRADA with Mine Safety Appliances in order to evaluate the analytical performance of the EKHO GC and is suitability for on-site environmental applications. Tests that were performed at ORNL included the analysis of air, water, and soil samples for aromatic hydrocarbons including benzene, toluene, xylene, and ethylbenzene (BTEX). These compounds were selected in order to simulate contamination by gasoline and other petroleum fuels. Performance factors that were studied included the instrument detection limits, the linearity, dynamic range, and precision for replicate samples. Other factors that were evaluated include the ease of set-up and operation.

National Security Science and Technology Initiative: Air Cargo Screening, Final Report for CRADA Number NFE-07-01081

Energy Technology Data Exchange (ETDEWEB)

Bingham, Philip [ORNL; Bush, John [Battelle Memorial Institute; Bowerman, Biays [Brookhaven National Laboratory; Cespedes, Ernesto [Idaho National Laboratory; White, Timothy [Pacific Northwest National Laboratory

2004-12-01

The non-intrusive inspection (NII) of consolidated air cargo carried on commercial passenger aircraft continues to be a technically challenging, high-priority requirement of the Department of Homeland Security’s Science and Technology Directorate (DHS S&T), the Transportation Security Agency and the Federal Aviation Administration. The goal of deploying a screening system that can reliably and cost-effectively detect explosive threats in consolidated cargo without adversely affecting the flow of commerce will require significant technical advances that will take years to develop. To address this critical National Security need, the Battelle Memorial Institute (Battelle), under a Cooperative Research and Development Agreement (CRADA) with four of its associated US Department of Energy (DOE) National Laboratories (Oak Ridge, Pacific Northwest, Idaho, and Brookhaven), conducted a research and development initiative focused on identifying, evaluating, and integrating technologies for screening consolidated air cargo for the presence of explosive threats. Battelle invested $8.5M of internal research and development funds during fiscal years 2007 through 2009.

Centralized Cryptographic Key Management and Critical Risk Assessment - CRADA Final Report For CRADA Number NFE-11-03562

Energy Technology Data Exchange (ETDEWEB)

Abercrombie, R. K. [ORNL; Peters, Scott [Sypris Electronics, LLC

2014-05-28

The Department of Energy Office of Electricity Delivery and Energy Reliability (DOE-OE) Cyber Security for Energy Delivery Systems (CSEDS) industry led program (DE-FOA-0000359) entitled "Innovation for Increasing Cyber Security for Energy Delivery Systems (12CSEDS)," awarded a contract to Sypris Electronics LLC to develop a Cryptographic Key Management System for the smart grid (Scalable Key Management Solutions for Critical Infrastructure Protection). Oak Ridge National Laboratory (ORNL) and Sypris Electronics, LLC as a result of that award entered into a CRADA (NFE-11-03562) between ORNL and Sypris Electronics, LLC. ORNL provided its Cyber Security Econometrics System (CSES) as a tool to be modified and used as a metric to address risks and vulnerabilities in the management of cryptographic keys within the Advanced Metering Infrastructure (AMI) domain of the electric sector. ORNL concentrated our analysis on the AMI domain of which the National Electric Sector Cyber security Organization Resource (NESCOR) Working Group 1 (WG1) has documented 29 failure scenarios. The computational infrastructure of this metric involves system stakeholders, security requirements, system components and security threats. To compute this metric, we estimated the stakes that each stakeholder associates with each security requirement, as well as stochastic matrices that represent the probability of a threat to cause a component failure and the probability of a component failure to cause a security requirement violation. We applied this model to estimate the security of the AMI, by leveraging the recently established National Institute of Standards and Technology Interagency Report (NISTIR) 7628 guidelines for smart grid security and the International Electrotechnical Commission (IEC) 63351, Part 9 to identify the life cycle for cryptographic key management, resulting in a vector that assigned to each stakeholder an estimate of their average loss in terms of dollars per day of system

78 FR 42532 - Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of...

Science.gov (United States)

2013-07-16

... DEPARTMENT OF HOMELAND SECURITY Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of Homeland Security for the Development of a Foot-and-Mouth Disease 3ABC ELISA Diagnostic Kit; Correction AGENCY: Science and Technology Directorate, Plum Island Animal Disease Center...

Development of a General-Purpose Analysis System Based on a Programmable Fluid Processor Final Report CRADA No. TC-2027-01

Energy Technology Data Exchange (ETDEWEB)

McConaghy, C. F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gascoyne, P. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-09-28

The purpose ofthis project was to develop a general-purpose analysis system based on a programmable fluid processor (PFP). The PFP is an array of electrodes surrounded by fluid reservoirs and injectors. Injected droplets of various reagents are manjpulated and combined on the array by Dielectrophoretic (DEP) forces. The goal was to create a small handheld device that could accomplish the tasks currently undertaken by much larger, time consuming, manual manipulation in the lab. The entire effo1t was funded by DARPA under the Bio-Flips program. MD Anderson Cancer Center was the PI for the DARPA effort. The Bio-Flips program was a 3- year program that ran from September 2000 to September 2003. The CRADA was somewhat behind the Bi-Flips program running from June 2001 to June 2004 with a no cost extension to September 2004.

78 FR 71632 - Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of...

Science.gov (United States)

2013-11-29

... processes leading to efficiencies while also saving money over time than employing single-use ISO bolts... automate processes leading to efficiencies and cost savings. Cross-border Commerce: Conveyance security... CRADA does not imply the future purchase of any materials, equipment, or services from the collaborating...

Performance improvement of silicon nitride ball bearings by ion implantation. CRADA final report

International Nuclear Information System (INIS)

Williams, J.M.; Miner, J.

1998-01-01

The present report summarizes technical results of CRADA No. ORNL 92-128 with the Pratt and Whitney Division of United Technologies Corporation. The stated purpose of the program was to assess the 3effect of ion implantation on the rolling contact performance of engineering silicon nitride bearings, to determine by post-test analyses of the bearings the reasons for improved or reduced performance and the mechanisms of failure, if applicable, and to relate the overall results to basic property changes including but not limited to swelling, hardness, modulus, micromechanical properties, and surface morphology. Forty-two control samples were tested to an intended runout period of 60 h. It was possible to supply only six balls for ion implantation, but an extended test period goal of 150 h was used. The balls were implanted with C-ions at 150 keV to a fluence of 1.1 x 10 17 /cm 2 . The collection of samples had pre-existing defects called C-cracks in the surfaces. As a result, seven of the control samples had severe spalls before reaching the goal of 60 h for an unacceptable failure rate of 0.003/sample-h. None of the ion-implanted samples experienced engineering failure in 150 h of testing. Analytical techniques have been used to characterize ion implantation results, to characterize wear tracks, and to characterize microstructure and impurity content. In possible relation to C-cracks. It is encouraging that ion implantation can mitigate the C-crack failure mode. However, the practical implications are compromised by the fact that bearings with C-cracks would, in no case, be acceptable in engineering practice, as this type of defect was not anticipated when the program was designed. The most important reason for the use of ceramic bearings is energy efficiency

Phase II CRADA ORNL99-0568 Report : Developing Transmission-Less Inverter Drive Systems for Axial-Gap Permanent magnet Accessory and Traction Motors and Generators; FINAL

International Nuclear Information System (INIS)

McKeever, J.W.

2001-01-01

Researchers of the Oak Ridge National Laboratory's (ORNLs) Power Electronics and Electric Machine Research Center (PEEMRC) collaborated with Visual Computing Systems (VCS) to develop an electric axial-gap permanent magnet (PM) motor controlled by a self-sensing inverter for driving vehicle accessories such as power steering, air conditioning, and brakes. VCS designed an 8 kW motor based on their Segmented Electromagnetic Array (SEMA) technology. ORNL designed a 10 kW inverter to fit within the volume of a housing, which had been integrated with the motor. This modular design was pursued so that multiple modules could be used for higher power applications. ORNL built the first inverter under the cooperative research and development agreement (CRADA) ORNL 98-0514 and drove a refurbished Delta motor with no load during the Merit Review at ORNL on Monday, May 17, 1999. Inverter circuitry and instructions for assembling the inverters were sent to VCS. A report was prepared and delivered during the Future Car Congress in April 2000, at Arlington, Virginia. Collaboration continued under CRADA ORNL 99-0568 as VCS designed and built a SEMA motor with a dual coil platter to be the traction motor for an electric truck. VCS and ORNL assembled two 45 kW inverters. Each inverter drove one coil, which was designed to deliver 15 kW continuous power and 45 kW peak power for 90 s. The vehicle was road tested as part of the Future Truck Competition. A report was prepared and delivered during the PCIM in October 2000, at Boston, Massachusetts

Laboratory Testing of the Boundary Layer Momentum Transfer Rotational Filter Systems, NETL-Innovatech, Inc., CRADA 98-F026, Final Report

Energy Technology Data Exchange (ETDEWEB)

National Energy Technology Laboratory

2000-08-22

A patented dynamic mechanical filter developed by InnovaTech was previously shown to remove fine particulate matter from industrial process gas streams at ambient temperatures and pressures. An all-metal, high-temperature version of this novel media-less filter was fabricated under this Cooperative Research and Development Agreement (CRADA) with DOE/NETL-Morgantown for hot gas testing of the device. The technology is entirely different in both concept and design from conventional vortex separators, cyclones, or porous media filters. This new filtration concept is capable of separating heavy loading of fine particles without blinding, fouling or bridging, and would require minimal operational costs over its anticipated multi-year service life. The all-metal filter design eliminates thermal stress cracking and premature failure prevalent in conventional porous ceramic filters. In contrast, conventional porous media filters (i.e., ceramic cross-flow or candles) easily foul, require periodic cleaning (typically backpulsing), frequent replacement and subsequent disposal.

High Specific Stiffness Shafts and Advanced Bearing Coatings for Gas Turbine Engines Final Report CRADA No. TC-1089-95

Energy Technology Data Exchange (ETDEWEB)

Barbee, Troy [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chin, Herbert [United Technologies Corporation, East Hartford, CT (United States)

2017-11-09

At the time of the CRADA, the largest in-service gas-turbine aircraft engines strove for increased thrust and power density to meet the requirements for take-off thrust, given the increase in take-off gross weight (TOGW) associated with longer range transport requirements. The trend in modem turbo shaft engines was toward turbine shafts with higher and higher length-to-diameter ratios, which reduced the shaft critical speed. Using co nventional shaft materials, this lead to shafts that needed to operate near or above sensitive shaft bending critical speeds, therefore requiring multiple bearings and/ or multiple squeeze-film dampers to control the dynamic response. Using new materials and d esign concepts this project demonstrated the use of new shaft materials which could provide increased shaft speed range above existing maximum engine speeds without encountering a critic al speed event and high vector deflections. This increased main shaft speed also resulted in decreased bearing life associated with lower heat dissipation and higher centrifugal forces. Thus, a limited effort was devoted to feasibility of higher performance bearing coatings to mitigate the speed effects.

Particulate Emissions Control using Advanced Filter Systems: Final Report for Argonne National Laboratory, Corning Inc. and Hyundai Motor Company CRADA Project

Energy Technology Data Exchange (ETDEWEB)

Seong, Hee Je [Argonne National Lab. (ANL), Argonne, IL (United States); Choi, Seungmok [Argonne National Lab. (ANL), Argonne, IL (United States)

2015-10-09

This is a 3-way CRADA project working together with Corning, Inc. and Hyundai Motor Co. (HMC). The project is to understand particulate emissions from gasoline direct-injection engines (GDI) and their physico-chemical properties. In addition, this project focuses on providing fundamental information about filtration and regeneration mechanisms occurring in gasoline particulate filter (GPF) systems. For the work, Corning provides most advanced filter substrates for GPF applications and HMC provides three-way catalyst (TWC) coating services of these filter by way of a catalyst coating company. Then, Argonne National Laboratory characterizes fundamental behaviors of filtration and regeneration processes as well as evaluated TWC functionality for the coated filters. To examine aging impacts on TWC and GPF performance, the research team evaluates gaseous and particulate emissions as well as back-pressure increase with ash loading by using an engine-oil injection system to accelerate ash loading in TWC-coated GPFs.

Northland science discovery. Final report, February 15, 1995--February 14, 1997

Energy Technology Data Exchange (ETDEWEB)

Sigford, A.

1997-09-01

This is a final report on the US Department of Energy`s grant of $39,900 to the PLUS Center at The College of St. Scholastica for a PREP program called Northland Science Discovery (NSD). This report includes an overview of the past year`s progress toward achieving the goals established for the project, a description of the results of these efforts and their relationship to the project goals, and appendices documenting program activities, accomplishments, and expenditures. The goal of Northland Science Discovery is to provide science and math enrichment activities for students traditionally underrepresented in science (girls, minorities, low-income, and rural children). The program works toward this goal by providing a four-week residential, research-based, science and math youth camp which serves approximately 25 students per year. NSD has been held each summer since 1992. This program also has an academic-year component consisting of reunions.

78 FR 28866 - Cooperative Research and Development Agreement (CRADA) Opportunity With the Department of...

Science.gov (United States)

2013-05-16

... commercialization access to critical assay components such as the recombinant 3ABC* protein (* indicates that the 3C... and Mouth Disease virus (FMDV) non-structural proteins (NSP): 3A, 3B, or 3C. This new FMDV 3ABC ELISA... this CRADA will be to develop and validate the FMDV 3ABC ELISA assay in collaboration with DHS S&T and...

Concepts for the Design of a Diagnostic Device to Detect Malignancies in Human Tissues Final Report CRADA No. TSB-2023-00

Energy Technology Data Exchange (ETDEWEB)

DaSilva, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Marion, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chase, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-19

BioLuminate, Inc. planned to develop, produce and market a revolutionary diagnostic device for early breast cancer diagnosis. The device was originally invented by NASA; and exclusively licensed to BioLuminate for commercialization. At the time of the CRADA, eighty-five percent (85%) of all biopsies in the United States were found negative each year. The number of biopsies cost the health care system $23 billio n annually. A multi-sensor probe would allow surgeons to improve breast cancer scre ening and significantly reduce the number of biopsies. BioLuminate was developing an in-vivo system for the detection of cancer using a multi-sensor needle/probe. The first system would be developed for the detection of breast cancer. LLNL, in collaboration with BioLuminate worked toward a detailed concept specification for the prototype multi-sensor needle/probe suitable for breast cancer analysis. BioLuminate in collaboration with LLNL, worked to develop a new version of the needle probe that would be the same size as needles commonly used to draw blood.

Reconciling Basin-Scale Top-Down and Bottom-Up Methane Emission Measurements for Onshore Oil and Gas Development: Cooperative Research and Development Final Report, CRADA Number CRD-14-572

Energy Technology Data Exchange (ETDEWEB)

Heath, Garvin A. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2017-12-04

The overall objective of the Research Partnership to Secure Energy for America (RPSEA)-funded research project is to develop independent estimates of methane emissions using top-down and bottom-up measurement approaches and then to compare the estimates, including consideration of uncertainty. Such approaches will be applied at two scales: basin and facility. At facility scale, multiple methods will be used to measure methane emissions of the whole facility (controlled dual tracer and single tracer releases, aircraft-based mass balance and Gaussian back-trajectory), which are considered top-down approaches. The bottom-up approach will sum emissions from identified point sources measured using appropriate source-level measurement techniques (e.g., high-flow meters). At basin scale, the top-down estimate will come from boundary layer airborne measurements upwind and downwind of the basin, using a regional mass balance model plus approaches to separate atmospheric methane emissions attributed to the oil and gas sector. The bottom-up estimate will result from statistical modeling (also known as scaling up) of measurements made at selected facilities, with gaps filled through measurements and other estimates based on other studies. The relative comparison of the bottom-up and top-down estimates made at both scales will help improve understanding of the accuracy of the tested measurement and modeling approaches. The subject of this CRADA is NREL's contribution to the overall project. This project resulted from winning a competitive solicitation no. RPSEA RFP2012UN001, proposal no. 12122-95, which is the basis for the overall project. This Joint Work Statement (JWS) details the contributions of NREL and Colorado School of Mines (CSM) in performance of the CRADA effort.

Volatility Discovery

DEFF Research Database (Denmark)

Dias, Gustavo Fruet; Scherrer, Cristina; Papailias, Fotis

The price discovery literature investigates how homogenous securities traded on different markets incorporate information into prices. We take this literature one step further and investigate how these markets contribute to stochastic volatility (volatility discovery). We formally show...... that the realized measures from homogenous securities share a fractional stochastic trend, which is a combination of the price and volatility discovery measures. Furthermore, we show that volatility discovery is associated with the way that market participants process information arrival (market sensitivity......). Finally, we compute volatility discovery for 30 actively traded stocks in the U.S. and report that Nyse and Arca dominate Nasdaq....

Chemical Frustration. A Design Principle for the Discovery of New Complex Alloy and Intermetallic Phases, Final Report

Energy Technology Data Exchange (ETDEWEB)

Fredrickson, Daniel C [Univ. of Wisconsin, Madison, WI (United States)

2015-06-23

Final technical report for "Chemical Frustration: A Design Principle for the Discovery of New Complex Alloy and Intermetallic Phases" funded by the Office of Science through the Materials Chemistry Program of the Office of Basic Energy Sciences.

Agreement Execution Process Study: CRADAs and NF-WFO Agreements and the Speed of Business

Energy Technology Data Exchange (ETDEWEB)

Harrer, Bruce J.; Cejka, Cheryl L.; Macklin, Richard; Miksovic, Ann

2011-02-01

This report summarizes the findings of a study on the execution of Cooperative Research and Development Agreements (CRADAs) and Non-Federal Work for Others (NF-WFO) agreements across the U.S. Department of Energy (DOE) laboratory complex. The study provides quantitiative estimates of times required to negotiate and execute these agreements across the DOE complex. It identifies factors impacting on cycle times and describes best practicies used at various laboratories and site offices that reduce cycle times.

Advanced variable speed air source integrated heat pump (AS-IHP) development - CRADA final report

Energy Technology Data Exchange (ETDEWEB)

Baxter, Van D. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Rice, C. Keith [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Munk, Jeffrey D. [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Ally, Moonis Raza [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States); Shen, Bo [Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)

2015-09-30

Between August 2011 and September 2015, Oak Ridge National Laboratory (ORNL) and Nordyne, LLC (now Nortek Global HVAC LLC, NGHVAC) engaged in a Cooperative Research and Development Agreement (CRADA) to develop an air-source integrated heat pump (AS-IHP) system for the US residential market. Two generations of laboratory prototype systems were designed, fabricated, and lab-tested during 2011-2013. Performance maps for the system were developed using the latest research version of the DOE/ORNL Heat Pump Design Model, or HPDM, (Rice 1991; Rice and Jackson 2005; Shen et al 2012) as calibrated against the lab test data. These maps were the input to the TRNSYS (SOLAR Energy Laboratory, et al, 2010) system to predict annual performance relative to a baseline suite of equipment meeting minimum efficiency standards in effect in 2006 (combination of 13 SEER air-source heat pump (ASHP) and resistance water heater with Energy Factor (EF) of 0.9). Predicted total annual energy savings, while providing space conditioning and water heating for a tight, well insulated 2600 ft2 (242 m2) house at 5 U.S. locations, ranged from 46 to 61%, averaging 52%, relative to the baseline system (lowest savings at the cold-climate Chicago location). Predicted energy use for water heating was reduced 62 to 76% relative to resistance WH. Based on these lab prototype test and analyses results a field test prototype was designed and fabricated by NGHVAC. The unit was installed in a 2400 ft2 (223 m2) research house in Knoxville, TN and field tested from May 2014 to April 2015. Based on the demonstrated field performance of the AS-IHP prototype and estimated performance of a baseline system operating under the same loads and weather conditions, it was estimated that the prototype would achieve ~40% energy savings relative to the minimum efficiency suite. The estimated WH savings were >60% and SC mode savings were >50%. But estimated SH savings were only about 20%. It is believed that had the test

Phase I ResonantSonic CRADA report

International Nuclear Information System (INIS)

Richterich, L.R.; Amos, L.O.; Fancher, J.D.; McLellan, G.W.; Setzer, W.V.; Tuttle, B.G.; Hockey, R.L.; Ferris, R.H.; Riechers, D.M.; Pitman, S.G.

1994-01-01

This test report describes the Phase 1 testing and results of the ResonantSonic drilling method. This effort was conducted as part of a Cooperative Research and Development Agreement (CRADA) between the US Department of Energy, Pacific Northwest Laboratory, Westinghouse Hanford Company and Water Development Corporation. The purpose of this demonstration was to evaluate the Water Development Corporation's ResonantSonic drilling system, modify components as necessary and determine compatible drilling applications for the ResonantSonic drilling method for use at facilities in the DOE complex and private industry. Initially, the ResonantSonic drill was used to drill several test holes at the Drilling Technology Test Site to assess the feasibility of drilling vertical and angle holes. After this initial phase, a 45 degree angle vapor extraction well was drilled to a depth of 168 feet at the 200 West Carbon Tetrachloride Site. This well was drilled and completed in nine days. Extensive geologic and vapor sampling were conducted while drilling this well. In addition, testing was also conducted at the test site to evaluated drilling with larger diameter casing (8 5/8 inch). Evaluation of the Resonant Sonic drilling method will be continued during the Phase 2 portion of testing to determine if improvements to the ResonantSonic system will make it a more viable method for drilling and sampling

Plug and Play Solar Power: Simplifying the Integration of Solar Energy in Hybrid Applications; Cooperative Research and Development Final Report, CRADA Number CRD-13-523

Energy Technology Data Exchange (ETDEWEB)

Lundstrom, Blake R. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-07-05

The Commonwealth Scientific and Industrial Research Organisation (CSIRO) is Australia's national science agency. CSIRO received funding from the Australian Solar Institute (ASI) for the United States-Australia Solar Energy Collaboration (USASEC) project 1-USO032 Plug and Play Solar Power: Simplifying the Integration of Solar Energy in Hybrid Applications (Broader Project). The Australian Solar Institute (ASI) operated from August 2009 to December 2012 before being merged into the Australian Renewable Energy Agency (ARENA). The Broader Project sought to simplify the integration, accelerate the deployment, and lower the cost of solar energy in hybrid distributed generation applications by creating plug and play solar technology. CSIRO worked with the National Renewable Energy Laboratory (NREL) as set out in a Joint Work Statement to review communications protocols relevant to plug-and-play technology and perform prototype testing in its Energy System Integration Facility (ESIF). For the avoidance of doubt, this CRADA did not cover the whole of the Broader Project and only related to the work described in the Joint Work Statement, which was carried out by NREL.

Final Report for Geometric Analysis for Data Reduction and Structure Discovery DE-FG02-10ER25983, STRIPES award # DE-SC0004096

Energy Technology Data Exchange (ETDEWEB)

Vixie, Kevin R. [Washington State Univ., Pullman, WA (United States)

2014-11-27

This is the final report for the project "Geometric Analysis for Data Reduction and Structure Discovery" in which insights and tools from geometric analysis were developed and exploited for their potential to large scale data challenges.

OCP TECD Report - TARDEC Blast Mitigation Program (BMP) and National Defense Industrial Association (NDIA) Michigan (MI) Chapter Cooperative Research and Development Agreement (CRADA) Summary

Science.gov (United States)

2017-09-26

Standard, MIL-STD-3058, Occupant-Centric Protection for Military Ground Vehicles. 15. SUBJECT TERMS Occupant Centric Platform Technology-Enabled...Capability Demonstration (OCP TECD), Occupant-centric, Occupant Protection , Underbody Blast, National Defense Industrial Association (NDIA...Cooperative Research and Development Agreement (CRADA) 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT 18. NUMBER OF PAGES 19a. NAME OF

Network discovery, characterization, and prediction : a grand challenge LDRD final report.

Energy Technology Data Exchange (ETDEWEB)

Kegelmeyer, W. Philip, Jr.

2010-11-01

This report is the final summation of Sandia's Grand Challenge LDRD project No.119351, 'Network Discovery, Characterization and Prediction' (the 'NGC') which ran from FY08 to FY10. The aim of the NGC, in a nutshell, was to research, develop, and evaluate relevant analysis capabilities that address adversarial networks. Unlike some Grand Challenge efforts, that ambition created cultural subgoals, as well as technical and programmatic ones, as the insistence on 'relevancy' required that the Sandia informatics research communities and the analyst user communities come to appreciate each others needs and capabilities in a very deep and concrete way. The NGC generated a number of technical, programmatic, and cultural advances, detailed in this report. There were new algorithmic insights and research that resulted in fifty-three refereed publications and presentations; this report concludes with an abstract-annotated bibliography pointing to them all. The NGC generated three substantial prototypes that not only achieved their intended goals of testing our algorithmic integration, but which also served as vehicles for customer education and program development. The NGC, as intended, has catalyzed future work in this domain; by the end it had already brought in, in new funding, as much funding as had been invested in it. Finally, the NGC knit together previously disparate research staff and user expertise in a fashion that not only addressed our immediate research goals, but which promises to have created an enduring cultural legacy of mutual understanding, in service of Sandia's national security responsibilities in cybersecurity and counter proliferation.

Development of a modular integrated control architecture for flexible manipulators. Final report

International Nuclear Information System (INIS)

Burks, B.L.; Battiston, G.

1994-01-01

In April 1994, ORNL and SPAR completed the joint development of a manipulator controls architecture for flexible structure controls under a CRADA between the two organizations. The CRADA project entailed design and development of a new architecture based upon the Modular Integrated Control Architecture (MICA) previously developed by ORNL. The new architecture, dubbed MICA-II, uses an object-oriented coding philosophy to provide a highly modular and expandable architecture for robotic manipulator control. This architecture can be readily ported to control of many different manipulator systems. The controller also provides a user friendly graphical operator interface and display of many forms of data including system diagnostics. The capabilities of MICA-II were demonstrated during oscillation damping experiments using the Flexible Beam Experimental Test Bed at Hanford

New Materials for Electric Drive Vehicles - Final CRADA Report

Energy Technology Data Exchange (ETDEWEB)

Carter, J. David [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-10-18

This project was sponsored by the US DOE Global Initiatives for Proliferation Prevention. The object was for Ukrainian and US partners, including Argonne, AETC, and Dontech to develop special carbon materials and factory production equipment with the goal of making better car batteries to achieve DOE's goals for all-electric and plug-in hybrid electric vehicles. Carbon materials are used in designs for lithium-ion batteries and metal-air batteries, both leading contenders for future electric cars. Specifically, the collaborators planned to use the equipment derived from this project to develop a rechargeable battery system that will use the carbon materials produced by the innovative factory process equipment. The final outcome of the project was that the Ukrainian participants consisting of the Kharkov Institute of Physics and Technology (KIPT), the Institute of Gas of National Academy of Sciences of Ukraine and the Materials Research Center, Ltd. designed, built, tested and delivered 14 pieces of processing equipment for pilot scale carbon production lines at the AETC, Arlington Heights facilities. The pilot scale equipment will be used to process materials such as activated carbon, thermally expanded graphite and carbon coated nano-particles. The equipment was shipped from Ukraine to the United States and received by AETC on December 3, 2013. The equipment is on loan from Argonne, control # 6140. Plug-in hybrid electric vehicles (PHEV) and all-electric vehicles have already demostrated success in the U.S. as they begin to share the market with older hybrid electric designs. When the project was conceived, PHEV battery systems provided a ~40 mile driving range (2011 figures). DOE R&D targets increased this to >100 miles at reduced cost less than $250/kWh (2011 figures.) A 2016 Tesla model S has boasted 270 miles. The project object was to develop pilot-production line equipment for advanced hybrid battery system that achieves cycle life of 1000, an energy

Heat transfer enhanced microwave process for stabilization of liquid radioactive waste slurry. Final report

International Nuclear Information System (INIS)

White, T.L.

1995-01-01

The objectve of this CRADA is to combine a polymer process for encapsulation of liquid radioactive waste slurry developed by Monolith Technology, Inc. (MTI), with an in-drum microwave process for drying radioactive wastes developed by Oak Ridge National Laboratory (ORNL), for the purpose of achieving a fast, cost-effectve commercial process for solidification of liquid radioactive waste slurry. Tests performed so far show a four-fold increase in process throughput due to the direct microwave heating of the polymer/slurry mixture, compared to conventional edge-heating of the mixer. We measured a steady-state throughput of 33 ml/min for 1.4 kW of absorbed microwave power. The final waste form is a solid monolith with no free liquids and no free particulates

Bioremediation of PCBs. CRADA final report

International Nuclear Information System (INIS)

Klasson, K.T.; Abramowicz, D.A.

1996-06-01

The Cooperative Research and Development Agreement was signed between Oak Ridge National Laboratory (ORNL) and General Electric Company (GE) on August 12, 1991. The objective was a collaborative venture between researchers at GE and ORNL to develop bioremediation of polychlorinated biphenyls (PCBs). The work was conducted over three years, and this report summarizes ORNL's effort. It was found that the total concentration of PCBs decreased by 70% for sequential anaerobic-aerobic treatment compared with a 67% decrease for aerobic treatment alone. The sequential treatment resulted in PCB products with fewer chlorines and shorter halflives in humans compared with either anaerobic or aerobic treatment alone. The study was expected to lead to a technology applicable to a field experiment that would be performed on a DOE contaminated site

Bioremediation of PCBs. CRADA final report

Energy Technology Data Exchange (ETDEWEB)

Klasson, K.T. [Oak Ridge National Lab., TN (United States). Chemical Technology Div., TN (United States); Abramowicz, D.A. [General Electric Co. Corporate Research and Development, Niskayuna, NY (United States)

1996-06-01

The Cooperative Research and Development Agreement was signed between Oak Ridge National Laboratory (ORNL) and General Electric Company (GE) on August 12, 1991. The objective was a collaborative venture between researchers at GE and ORNL to develop bioremediation of polychlorinated biphenyls (PCBs). The work was conducted over three years, and this report summarizes ORNL`s effort. It was found that the total concentration of PCBs decreased by 70% for sequential anaerobic-aerobic treatment compared with a 67% decrease for aerobic treatment alone. The sequential treatment resulted in PCB products with fewer chlorines and shorter halflives in humans compared with either anaerobic or aerobic treatment alone. The study was expected to lead to a technology applicable to a field experiment that would be performed on a DOE contaminated site.

CRADA Final Report: Weld Predictor App

Energy Technology Data Exchange (ETDEWEB)

Billings, Jay Jay [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2018-01-25

Welding is an important manufacturing process used in a broad range of industries and market sectors, including automotive, aerospace, heavy manufacturing, medical, and defense. During welded fabrication, high localized heat input and subsequent rapid cooling result in the creation of residual stresses and distortion. These residual stresses can significantly affect the fatigue resistance, cracking behavior, and load-carrying capacity of welded structures during service. Further, additional fitting and tacking time is often required to fit distorted subassemblies together, resulting in non-value added cost. Using trial-and-error methods to determine which welding parameters, welding sequences, and fixture designs will most effectively reduce distortion is a time-consuming and expensive process. For complex structures with many welds, this approach can take several months. For this reason, efficient and accurate methods of mitigating distortion are in-demand across all industries where welding is used. Analytical and computational methods and commercial software tools have been developed to predict welding-induced residual stresses and distortion. Welding process parameters, fixtures, and tooling can be optimized to reduce the HAZ softening and minimize weld residual stress and distortion, improving performance and reducing design, fabrication and testing costs. However, weld modeling technology tools are currently accessible only to engineers and designers with a background in finite element analysis (FEA) who work with large manufacturers, research institutes, and universities with access to high-performance computing (HPC) resources. Small and medium enterprises (SMEs) in the US do not typically have the human and computational resources needed to adopt and utilize weld modeling technology. To allow an engineer with no background in FEA and SMEs to gain access to this important design tool, EWI and the Ohio Supercomputer Center (OSC) developed the online weld application software tool “WeldPredictor” ( https://eweldpredictor.ewi.org ). About 1400 users have tested this application. This project marked the beginning of development on the next version of WeldPredictor that addresses many outstanding features of the original, including 3D models, allow more material hardening laws, model material phase transformation, and uses open source finite element solvers to quickly solve problems (as opposed to expensive commercial tools).

Final report on the Vitro CRADA

International Nuclear Information System (INIS)

1994-02-01

ORNL and Vitro investigated the application of advanced Geographic Information System (GIS) technologies to site characterization and environmental remediation work. The six tasks were to do feasibility studies for integrating GIS tools with DBMS, graphics, and other packages to aid in environmental analyses, develop environmental and geographic data standards and guidelines including data structures/quality assurance practices/metadata, investigate environmental and remediation predictive modeling and their integration with GIS, study remote sensing techniques including Global Positioning Systems techniques, and investigate display enhancement techniques including 2D/3D visualization coupled with GIS data bases

Maximum Entropy in Drug Discovery

Directory of Open Access Journals (Sweden)

Chih-Yuan Tseng

2014-07-01

Full Text Available Drug discovery applies multidisciplinary approaches either experimentally, computationally or both ways to identify lead compounds to treat various diseases. While conventional approaches have yielded many US Food and Drug Administration (FDA-approved drugs, researchers continue investigating and designing better approaches to increase the success rate in the discovery process. In this article, we provide an overview of the current strategies and point out where and how the method of maximum entropy has been introduced in this area. The maximum entropy principle has its root in thermodynamics, yet since Jaynes’ pioneering work in the 1950s, the maximum entropy principle has not only been used as a physics law, but also as a reasoning tool that allows us to process information in hand with the least bias. Its applicability in various disciplines has been abundantly demonstrated. We give several examples of applications of maximum entropy in different stages of drug discovery. Finally, we discuss a promising new direction in drug discovery that is likely to hinge on the ways of utilizing maximum entropy.

Radiation Hardened Telerobotic Dismantling System Development Final Report CRADA No. TC-1340-96

Energy Technology Data Exchange (ETDEWEB)

Smith, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lightman, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-09-27

This project was a collaborative effort between the University of California, LLNL and RedZone Robotics, Inc. for the development of radiation-hardened telerobotic dismantling systems for use in applications such as nuclear facility remediation, nuclear accident response, and Chemobyltype remediation. The project supported the design, development, fabrication and testing of a Ukrainian robotic systems. The project was completed on time and within budget. All deliverables were completed. The final project deliverables were consistent with the plans developed in the original project with the exception that the fabricated systems remained in Ukraine.

University of Washington/ Northwest National Marine Renewable Energy Center Tidal Current Technology Test Protocol, Instrumentation, Design Code, and Oceanographic Modeling Collaboration: Cooperative Research and Development Final Report, CRADA Number CRD-11-452

Energy Technology Data Exchange (ETDEWEB)

Driscoll, Frederick R. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-11-01

The University of Washington (UW) - Northwest National Marine Renewable Energy Center (UW-NNMREC) and the National Renewable Energy Laboratory (NREL) will collaborate to advance research and development (R&D) of Marine Hydrokinetic (MHK) renewable energy technology, specifically renewable energy captured from ocean tidal currents. UW-NNMREC is endeavoring to establish infrastructure, capabilities and tools to support in-water testing of marine energy technology. NREL is leveraging its experience and capabilities in field testing of wind systems to develop protocols and instrumentation to advance field testing of MHK systems. Under this work, UW-NNMREC and NREL will work together to develop a common instrumentation system and testing methodologies, standards and protocols. UW-NNMREC is also establishing simulation capabilities for MHK turbine and turbine arrays. NREL has extensive experience in wind turbine array modeling and is developing several computer based numerical simulation capabilities for MHK systems. Under this CRADA, UW-NNMREC and NREL will work together to augment single device and array modeling codes. As part of this effort UW NNMREC will also work with NREL to run simulations on NREL's high performance computer system.

Development of high power radio frequency components for fusion plasma heating. Final report, Revision 3

International Nuclear Information System (INIS)

1997-01-01

The purpose of this CRADA was to develop advanced microwave heating systems for both ion cyclotron heating and electron cyclotron heating for magnetic fusion reactors. This involved low-frequency (UHF), high-power (millimeter-wave) microwave components, such as antennas, windows, and matching elements. This CRADA also involved developing conceptual designs for new microwave sources. General Atomics built and tested the distributed cooled window and provided LLNL with transmission and reflection test data in order to then benchmark the EM computer codes. The combline antenna built and analyzed by LLNL was based on a GA design. GA provided LLNL with a number of niobium plates for hot pressing and provided the necessary guidance to allow successful bonding. GA representatives were on site at LLNL on numerous occasions to consult and give guidance on the ferroelectric tuner, combline antenna and distributed window analysis

Discovery of nuclear fission in Berlin 1938

International Nuclear Information System (INIS)

Hilscher, D.

1989-01-01

The story of the discovery of nuclear fission, one of the most exciting stories of how a scientific puzzle was finally solved and how the scientists involved were blind to many obvious indications, is described. (author). 29 refs

Rapid Response Manufacturing (RRM). Final CRADA report

Energy Technology Data Exchange (ETDEWEB)

Cain, W.D. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Waddell, W.L. [National Centers for Manufacturing Sciences, Ann Arbor, MI (United States)

1997-08-28

A major accomplishment of the Rapid Response Manufacturing (RRM) project was the development of a broad-based generic framework for automating and integrating the design-to-manufacturing activities associated with machined part products. Key components of the framework are a manufacturing model that integrates product and process data in a consistent, minimally redundant manner, an advanced computer-aided engineering working environment, knowledge-based software systems for design, process planning, and manufacturing and new production technologies for making products directly from design application software.

Membranes for corrosive oxidations. Final CRADA report.

Energy Technology Data Exchange (ETDEWEB)

Snyder, S. W.; Energy Systems

2010-02-01

The objective of this project is to develop porous hydrophilic membranes that are highly resistant to oxidative and corrosive conditions and to deploy them for recovery and purification of high tonnage chemicals such as hydrogen peroxide and other oxychemicals. The research team patented a process for membrane-based separation of hydrogen peroxide (US Patent No. 5,662,878). The process is based on using a hydrophilic membrane to separate hydrogen peroxide from the organic working solution. To enable this process, a new method for producing hydrophilic membrane materials (Patent No.6,464,880) was reported. We investigated methods of producing these hydrophilic materials and evaluated separations performance in comparison to membrane stability. It was determined that at the required membrane flux, membrane stability was not sufficient to design a commercial process. This work was published (Hestekin et al., J. Membrane Science 2006). To meet the performance needs of the process, we developed a membrane contactor method to extract the hydrogen peroxide, then we surveyed several commercial and pre-commercial membrane materials. We identified pre-commercial hydrophilic membranes with the required selectivity, flux, and stability to meet the needs of the process. In addition, we invented a novel reaction/separations format that greatly increases the performance of the process. To test the performance of the membranes and the new formats we procured and integrated reactor/membrane separations unit that enables controlled mixing, flow, temperature control, pressure control, and sampling. The results were used to file a US non-provisional patent application (ANL-INV 03-12). Hydrogen peroxide is widely used in pulp and paper applications, environmental treatment, and other industries. Virtually all hydrogen peroxide production is now based on a process featuring catalytic hydrogenation followed by auto-oxidation of suitable organic carrier molecules. This process has several drawbacks, particularly in the extraction phase. One general disadvantage of this technology is that hydrogen peroxide must be produced at large centralized plants where it is concentrated to 70% by distillation and transported to the users plant sites where it is diluted before use. Advanced membranes have the potential to enable more efficient, economic, and safe manufacture of hydrogen peroxide. Advanced membrane technology would allow filtration-based separation to replace the difficult liquid-liquid extraction based separation step of the hydrogen peroxide process. This would make it possible for hydrogen peroxide to be produced on-site in mini-plants at 30% concentration and used at the same plant location without distillation and transportation. As a result, production could become more cost-effective, safe and energy efficient.

Pine Gene Discovery Project - Final Report - 08/31/1997 - 02/28/2001; FINAL

International Nuclear Information System (INIS)

Whetten, R. W.; Sederoff, R. R.; Kinlaw, C.; Retzel, E.

2001-01-01

Integration of pines into the large scope of plant biology research depends on study of pines in parallel with study of annual plants, and on availability of research materials from pine to plant biologists interested in comparing pine with annual plant systems. The objectives of the Pine Gene Discovery Project were to obtain 10,000 partial DNA sequences of genes expressed in loblolly pine, to determine which of those pine genes were similar to known genes from other organisms, and to make the DNA sequences and isolated pine genes available to plant researchers to stimulate integration of pines into the wider scope of plant biology research. Those objectives have been completed, and the results are available to the public. Requests for pine genes have been received from a number of laboratories that would otherwise not have included pine in their research, indicating that progress is being made toward the goal of integrating pine research into the larger molecular biology research community

Final Evaluation of Assignment: Media Literacy. A Report to the Discovery Channel.

Science.gov (United States)

Kubey, Robert; Serafin, Gina Marcello

The Assignment: Media Literacy curriculum is a 6-module media literacy curriculum developed by Renee Hobbs of Babson College and her staff in collaboration with the Discovery Channel. There are three versions of Assignment: Media Literacy, one for elementary school students, one for middle school students, and one for high school students. Close…

A Portable Cell Maintenance System for Rapid Toxicity Monitoring Final Report CRADA No. TC-02081-04

Energy Technology Data Exchange (ETDEWEB)

Kane, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Zhou, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-09-27

The Phase I STTR research project was targeted at meeting the objectives and requirements stated in STTR solicitation A04-T028 for a Portable Cell Maintenance System for Rapid Toxicity Monitoring. In accordance with the requirements for STTR programs, collaboration was formed between a small business, Kionix, Inc., and The Regents of the University of California, Lawrence Livermore National Laboratory (LLNL). The collaboration included CytoDiscovery, Inc. (CDI) which, in collaboration with Kionix, provided access to membrane chip technology and provided program support and coordination. The objective of the overall program (excerpted from the original solicitation) was: “To develop a small, portable cell maintenance system for the transport, storage, and monitoring of viable vertebrate cells and tissues.” The goal of the Phase I project was to demonstrate the feasibility of achieving the program objectives utilizing a system comprised of a small-size, microfluidic chip-based cell maintenance cartridge (CMC) and a portable cell maintenance system (CMS) capable of housing a minimum of four CMCs. The system was designed to be capable of optimally maintaining multiple vertebrate cell types while supporting a wide variety of cellular assays.

Solutions for Digital Video Transmission Technology Final Report CRADA No. TC02068.0

Energy Technology Data Exchange (ETDEWEB)

Smith, A. T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Rivers, W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-09-07

This Project aimed at development of software for seismic data processing based on the Geotool code developed by the American company Multimax., Inc. The Geotool code was written in early 90-es for the UNIX platform. Under Project# 2821, functions of the old Geotool code were transferred into a commercial version for the Microsoft XP and Vista platform with addition of new capabilities on visualization and data processing. The developed new version of the Geotool+ was implemented using the up-to-date tool Microsoft Visual Studio 2005 and uses capabilities of the .NET platform. C++ was selected as the main programming language for the Geotool+. The two-year Project was extended by six months and funding levels increased from 600,000 to $670,000. All tasks were successfully completed and all deliverables were met for the project even though both the industrial partner and LLNL principal investigator left the project before its final report.

Providing Fast Discovery in D2D Communication with Full Duplex Technology

DEFF Research Database (Denmark)

Gatnau, Marta; Berardinelli, Gilberto; Mahmood, Nurul Huda

2016-01-01

technology to provide D2D fast discovery. Such framework provides an algorithm to estimate the number of neighbor devices and to dynamically decide the transmission probability, for adapting to network changes and meeting the 10 milliseconds target. Finally, a signaling scheme is proposed to reduce......In Direct Device-to-Device (D2D), the device awareness procedure known as the discovery phase is required prior to the exchange of data. This work considers autonomous devices where the infrastructure is not involved in the discovery procedure. Commonly, the transmission of the discovery message...... the network interference. Results show that our framework performs better than a static approach, reducing the time it takes to complete the discovery phase. In addition, supporting full duplex allows to further reduce the discovery time compared to half duplex transmission mode....

CRADA Final Report for CRADA Number NFE-08-01671 Materials for Advanced Turbocharger Designs

Energy Technology Data Exchange (ETDEWEB)

Maziasz, P. J. [ORNL; Wilson, M. [Honeywell

2014-11-28

Results were obtained on residual stresses in the weld of the steel shaft to the Ni-based superalloy turbine wheel for turbochargers. Neutron diffraction studies at the HFIR Residual Stress Facility showed asymmetric tensile stresses after electron-beam welding of the wheel and shaft. A post-weld heat-treatment was found to relieve and reduce the residual stresses. Results were also obtained on cast CF8C-Plus steel as an upgrade alternative to cast irons (SiMo, Ni-resist) for higher temperature capability and performance for the turbocharger housing. CF8C-Plus steel has demonstrated creep-rupture resistance at 600-950oC, and is more creep-resistant than HK30Nb, but lacks oxidation-resistance at 800oC and above in 10% water vapor. New modified CF8C-Plus Cu/W steels with Cr and Ni additions show better oxidation resistance at 800oC in 10% water vapor, and have capability to higher temperatures. For automotive gasoline engine turbocharger applications, higher temperatures are required, so at the end of this project, testing began at 1000oC and above.

Transactive Campus Energy Systems: Final Report

Energy Technology Data Exchange (ETDEWEB)

Katipamula, Srinivas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Corbin, Charles D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Haack, Jereme N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hao, He [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Kim, Woohyun [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hostick, Donna J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Akyol, Bora A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Allwardt, Craig H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carpenter, Brandon J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Huang, Sen [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Liu, Guopeng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lutes, Robert G. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Makhmalbaf, Atefe [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Mendon, Vrushali V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Ngo, Hung [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Somasundaram, Sriram [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Underhill, Ronald M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhao, Mingjie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2017-09-26

Transactive energy refers to the combination of economic and control techniques to improve grid reliability and efficiency. The fundamental purpose of transactive energy management is to seamlessly coordinate the operation of large numbers of new intelligent assets—such as distributed solar, energy storage and responsive building loads—to provide the flexibility needed to operate the power grid reliably and at minimum cost, particularly one filled with intermittent renewable generation such as the Pacific Northwest. It addresses the key challenge of providing smooth, stable, and predictable “control” of these assets, despite the fact that most are neither owned nor directly controlled by the power grid. The Clean Energy and Transactive Campus (CETC) work described in this report was done as part of a Cooperative Research and Development Agreement (CRADA) between the U.S. Department of Energy’s Pacific Northwest National Laboratory (PNNL) and the Washington State Department of Commerce (Commerce) through the Clean Energy Fund (CEF). The project team consisted of PNNL, the University of Washington (UW) and Washington State University (WSU), to connect the PNNL, UW, and WSU campuses to form a multi-campus testbed for transaction-based energy management—transactive—solutions. Building on the foundational transactive system established by the Pacific Northwest Smart Grid Demonstration (PNWSGD), the purpose of the project was to construct the testbed as both a regional flexibility resource and as a platform for research and development (R&D) on buildings/grid integration and information-based energy efficiency. This report provides a summary of the various tasks performed under the CRADA.

A Metadata Schema for Geospatial Resource Discovery Use Cases

Directory of Open Access Journals (Sweden)

Darren Hardy

2014-07-01

Full Text Available We introduce a metadata schema that focuses on GIS discovery use cases for patrons in a research library setting. Text search, faceted refinement, and spatial search and relevancy are among GeoBlacklight's primary use cases for federated geospatial holdings. The schema supports a variety of GIS data types and enables contextual, collection-oriented discovery applications as well as traditional portal applications. One key limitation of GIS resource discovery is the general lack of normative metadata practices, which has led to a proliferation of metadata schemas and duplicate records. The ISO 19115/19139 and FGDC standards specify metadata formats, but are intricate, lengthy, and not focused on discovery. Moreover, they require sophisticated authoring environments and cataloging expertise. Geographic metadata standards target preservation and quality measure use cases, but they do not provide for simple inter-institutional sharing of metadata for discovery use cases. To this end, our schema reuses elements from Dublin Core and GeoRSS to leverage their normative semantics, community best practices, open-source software implementations, and extensive examples already deployed in discovery contexts such as web search and mapping. Finally, we discuss a Solr implementation of the schema using a "geo" extension to MODS.

The discovery of the antiproton

International Nuclear Information System (INIS)

Chamberlain, Owen

1989-01-01

A number of groups of particle physicists competed to provide track evidence of the existence of Dirac's postulated antiproton in the mid-1950s. The work of the several teams is described briefly. The author describes the work of his own group on the Bevatron in more detail, and how they finally observed the antiproton. The article finishes with an assessment of the importance of this discovery. (UK)

Discovery of uranium by Martin Heinrich Klaproth 200 years ago

Energy Technology Data Exchange (ETDEWEB)

Schuettmann, W

1989-10-01

200 years ago - on September 24, 1789 - the pharmacist Martin Heinrich Klaproth (1743-1817) stated his discovery of uranium in the hearing of the Royal Prussian Academy of sciences in Berlin. This jubilee gave occasion to appreciate that discovery. The first part of the paper gives a brief bibliography of the researcher. His course of life from a pharmaceutical apprentice to the leading analytical chemist of his epoch is outlined; his performance and discoveries, in particular in the field of mineral chemistry, are appreciated. The second part deals with the discovery of uranium and his lifelong pursuit of the new metal in more detail. After briefly appreciating Klaproth's personality as a researcher, finally the importance is indicated that uranium meanwhile has gained as a source of nuclear power for the human race. (author).

Hundred years of X-ray discovery: a brief historical account. 1895-1995

International Nuclear Information System (INIS)

Santin Filho, Ourides

1995-01-01

This article gives a brief historical account of the discovery of X-rays, including early experiments of Roentgen, Barkla and Henry Bragg, followed by experiments leading to the discovery of X-ray diffraction by crystals, made by Max von Laue and Lawrence Bragg, which led to the discovery of ionic bonding in crystals. The steps in the study of X-ray spectroscopy by Moseley are also mentioned, and the correlation of his results with theories of Bohr and Rydberg, leading to the discovery of atomic number. Finally, the use of X-ray diffraction in structure determinations through Fourier transform is emphasized. (author). 35 refs., 7 figs

Youth plus experience: the discovery of 51 Pegasi b

Science.gov (United States)

Cenadelli, Davide; Bernagozzi, Andrea

2015-12-01

In 1995, Michel Mayor and Didier Queloz announced they discovered 51 Pegasi b, the first planet ever found around a star other than the Sun. This discovery turned out to be a milestone of recent astronomy, as it opened up a new field of research that is growing impressively these days. However, 51 Pegasi b has surprising properties as compared to the planets of the Solar System, as it is a giant planet on a very close-in orbit around its parent star. Hence, its discovery was unexpected and its actual existence did not go unchallenged. In the following years, a passionate debate sprang up, and finally astronomers accepted it, but at the price of a deep revision of our understanding of how planetary systems are formed and evolve. In the present paper, we reconstruct the dynamics of the discovery of 51 Pegasi b and the first exoplanets, the quarrel that arose among astronomers and the final acceptance of the existence of planets with unexpected characteristics. This remarkable story is recounted by means of published literature as well as interviews with several of its main protagonists.

Recent developments concerning the discovery of elements 101-111

International Nuclear Information System (INIS)

Greenwood, N.N.

1997-01-01

The addition of eleven new elements (Z=101-111) to the Periodic Table during the past 40 years has involved outstanding feats of intellectual and experimental virtuosity. Some of the discoveries have been widely accepted but others have been hotly contested and this has led to distressingly persistent disagreements concerning priority. For this reason IUPAC and IUPAP (Physics) set up a joint Transfermium Working Group (TWG) in 1987 to recommend ''the criteria that must be satisfied for the discovery of a new element to be recognised'' and to apply these criteria to questions of priority in the discovery of the transfermium elements (Z > 100). After several years of detailed work the TWG published their extensive studies and conclusions, and these have been accepted by both IUPAC and IUPAP. Many subtle and difficult points were considered and these will be discussed in this lecture together with the TWG's final recommendations, which have been widely though not universally accepted by the scientific community. The separate question of names and symbols for the new elements with Z > 103 has not yet been finally resolved but will be briefly discussed. (Author)

The discovery of uranium by Martin Heinrich Klaproth 200 years ago

International Nuclear Information System (INIS)

Schuettmann, W.

1989-01-01

200 years ago - on September 24, 1789 - the pharmacist Martin Heinrich Klaproth (1743-1817) stated his discovery of uranium in the hearing of the Royal Prussian Academy of sciences in Berlin. This jubilee gave occasion to appreciate that discovery. The first part of the paper gives a brief bibliography of the researcher. His course of life from a pharmaceutical apprentice to the leading analytical chemist of his epoch is outlined; his performance and discoveries, in particular in the field of mineral chemistry, are appreciated. The second part deals with the discovery of uranium and his lifelong pursuit of the new metal in more detail. After briefly appreciating Klaproth's personality as a researcher, finally the importance is indicated that uranium meanwhile has gained as a source of nuclear power for the human race. (author)

Ion Beam Drift Compression Technology for NDCX. CRADA Final Report. CRADA No. LB05-001820

International Nuclear Information System (INIS)

Waldron, William L.

2009-01-01

Summary of the specific research and project accomplishments: Through this collaboration, LBNL and FPSI determined the specific energy manipulations that apply to the Neutralized Drift Compression Experiment (NDCX) ion beam and developed the preliminary design of a Fast Induction Energy Corrector (FIEC). This effort was successfully completed, firmly establishing the technical feasibility of the proposed approach for regulating the longitudinal energy distribution of the NDCX ion beam. This is a critical step in achieving the NDCX goal of axial compression of the beam by a factor of 100 during neutralized drift.

Discovery as a process

Energy Technology Data Exchange (ETDEWEB)

Loehle, C.

1994-05-01

The three great myths, which form a sort of triumvirate of misunderstanding, are the Eureka! myth, the hypothesis myth, and the measurement myth. These myths are prevalent among scientists as well as among observers of science. The Eureka! myth asserts that discovery occurs as a flash of insight, and as such is not subject to investigation. This leads to the perception that discovery or deriving a hypothesis is a moment or event rather than a process. Events are singular and not subject to description. The hypothesis myth asserts that proper science is motivated by testing hypotheses, and that if something is not experimentally testable then it is not scientific. This myth leads to absurd posturing by some workers conducting empirical descriptive studies, who dress up their study with a ``hypothesis`` to obtain funding or get it published. Methods papers are often rejected because they do not address a specific scientific problem. The fact is that many of the great breakthroughs in silence involve methods and not hypotheses or arise from largely descriptive studies. Those captured by this myth also try to block funding for those developing methods. The third myth is the measurement myth, which holds that determining what to measure is straightforward, so one doesn`t need a lot of introspection to do science. As one ecologist put it to me ``Don`t give me any of that philosophy junk, just let me out in the field. I know what to measure.`` These myths lead to difficulties for scientists who must face peer review to obtain funding and to get published. These myths also inhibit the study of science as a process. Finally, these myths inhibit creativity and suppress innovation. In this paper I first explore these myths in more detail and then propose a new model of discovery that opens the supposedly miraculous process of discovery to doser scrutiny.

Novel CO{sub 2} capture. Final CRADA Report.

Energy Technology Data Exchange (ETDEWEB)

Snyder, S. W.; Energy Systems

2009-11-30

The goal of this work was to use electrochemically driven pH control to develop a second generation, enzyme-based contained liquid membrane (CLM) permeator to extract CO{sub 2} from a variety of coal-based flue gas streams more efficiently than does the CLM current design, while achieving performance coincident with DOE targets of less than 45% Cost of electricity (COE) in 2007 and less than 20% COE in 2012. Central to this goal the CLM would be alkaline (>pH 8) at the feed gas side and acid (

CRADA Final Report, 2011S003, Faraday Technologies

International Nuclear Information System (INIS)

Faraday Technologies

2012-01-01

This Phase I SBIR program addressed the need for an improved manufacturing process for electropolishing niobium RF superconducting cavities for the International Linear Collider (ILC). The ILC is a proposed particle accelerator that will be used to gain a deeper understanding of the forces of energy and matter by colliding beams of electrons and positrons at nearly the speed of light. The energy required for this to happen will be achieved through the use of advanced superconducting technology, specifically ∼16,000 RF superconducting cavities operating at near absolute zero. The RF superconductor cavities will be fabricated from highly pure Nb, which has an extremely low surface resistance at 2 Kelvin when compared to other materials. To take full advantage of the superconducting properties of the Nb cavities, the inner surface must be a) polished to a microscale roughness < 0.1 µm with removal of at least 100 µm of material, and b) cleaned to be free of impurities that would degrade performance of the ILC. State-of-the-art polishing uses either chemical polishing or electropolishing, both of which require hydrofluoric acid to achieve breakdown of the strong passive film on the surface. In this Phase I program, Faraday worked with its collaborators at the Thomas Jefferson National Accelerator Facility (JLab) to demonstrate the feasibility of an electropolishing process for pure niobium, utilizing an environmentally benign alternative to chemical or electrochemical polishing electrolytes containing hydrofluoric acid. Faraday utilized a 31 wt% aqueous sulfuric acid solution (devoid of hydrofluoric acid) in conjunction with the FARADAYICSM Process, which uses pulse/pulse reverse fields for electropolishing, to demonstrate the ability to electropolish niobium to the desired surface finish. The anticipated benefits of the FARADAYICSM Electropolishing process will be a simpler, safer, and less expensive method capable of surface finishing high purity niobium cavities. Another potential benefit would be for the medical industry that uses hydrofluoric acid to electropolish niobium-alloy materials. The FARADAYICSM Electropolishing process will eliminate the environmental hazards posed by the use of hydrofluoric acid employed by chemical polishing and conventional electropolishing. Further, improved performance benefits may be possible. The overall objective of the Phase I program was to demonstrate that FARADAYIC Electropolishing of niobium cavities in electrolytes free of hydrofluoric acid can meet the RF superconducting performance criteria of those cavities. The FARADAYIC Electropolishing Process developed in the Phase I program was used to polish 50 mm Nb disks to a surface roughness (RA) of < 1 nm over a small area through process and post-processing optimization. An excellent level of surface cleanliness was achieved. While the desired 2K RF performance has not yet been achieved, Faraday believes that surface oxide state can be controlled through manipulation of the process parameters, to meet the 2K RF standard. Faraday is establishing apparatus and facilities infrastructure for single-cell SRF cavity electropolishing, through a synergistic effort with the Fermi National Accelerator Facility (Fermilab) to scale-up electropolishing of superconducting RF cavities. Faraday proposes to commercialize the subject technology via an IP based strategic relationship with a partner with established market channels within two primary commercialization avenues: 1) the superconducting particle accelerator community, 2) the medical device and implant market. Faraday will initially maintain Low Rate Initial Production capabilities for an application, but latterly seek a strategic partner who is solely dedicated to high rate production

The discovery of viruses: advancing science and medicine by challenging dogma.

Science.gov (United States)

Artenstein, Andrew W

2012-07-01

The discovery of viruses in the final years of the nineteenth century represented the culmination of two decades of work on tobacco mosaic disease by three botanical scientists. Eventually their discovery led to a paradigm shift in scientific thought, but it took more than 20 years to appreciate its implications because it was inconsistent with the prevailing dogma of the time-Koch's postulates. Although these 'rules' were actually conceived of as guidelines upon which to establish microbial causality and their implementation resulted in many new discoveries, they also had the unintended effect of limiting the interpretation of novel findings. However, by challenging existing dogma through rigorous scientific observation and sheer persistence, the investigators advanced medicine and heralded new areas of discovery. Copyright © 2012 International Society for Infectious Diseases. Published by Elsevier Ltd. All rights reserved.

Knowledge discovery with classification rules in a cardiovascular dataset.

Science.gov (United States)

Podgorelec, Vili; Kokol, Peter; Stiglic, Milojka Molan; Hericko, Marjan; Rozman, Ivan

2005-12-01

In this paper we study an evolutionary machine learning approach to data mining and knowledge discovery based on the induction of classification rules. A method for automatic rules induction called AREX using evolutionary induction of decision trees and automatic programming is introduced. The proposed algorithm is applied to a cardiovascular dataset consisting of different groups of attributes which should possibly reveal the presence of some specific cardiovascular problems in young patients. A case study is presented that shows the use of AREX for the classification of patients and for discovering possible new medical knowledge from the dataset. The defined knowledge discovery loop comprises a medical expert's assessment of induced rules to drive the evolution of rule sets towards more appropriate solutions. The final result is the discovery of a possible new medical knowledge in the field of pediatric cardiology.

What Does Galileo's Discovery of Jupiter's Moons Tell Us About the Process of Scientific Discovery?

Science.gov (United States)

Lawson, Anton E.

In 1610, Galileo Galilei discovered Jupiter''smoons with the aid of a new morepowerful telescope of his invention. Analysisof his report reveals that his discoveryinvolved the use of at least three cycles ofhypothetico-deductive reasoning. Galileofirst used hypothetico-deductive reasoning to generateand reject a fixed star hypothesis.He then generated and rejected an ad hocastronomers-made-a-mistake hypothesis.Finally, he generated, tested, and accepted a moonhypothesis. Galileo''s reasoningis modeled in terms of Piaget''s equilibration theory,Grossberg''s theory of neurologicalactivity, a neural network model proposed by Levine &Prueitt, and another proposedby Kosslyn & Koenig. Given that hypothetico-deductivereasoning has played a rolein other important scientific discoveries, thequestion is asked whether it plays a rolein all important scientific discoveries. In otherwords, is hypothetico-deductive reasoningthe essence of the scientific method? Possiblealternative scientific methods, such asBaconian induction and combinatorial analysis,are explored and rejected as viablealternatives. Educational implications of thishypothetico-deductive view of scienceare discussed.

Fiber Optic Hydrogen Sensor Development: Cooperative Research and Development Final Report, CRADA number CRD-05-00158

International Nuclear Information System (INIS)

Ringer, M.

2010-01-01

NREL and Nuclear Filter Technology collaborated to develop a prototype product for a hydrogen threshold sensor that was used to monitor hydrogen production in the transport of nuclear waste transport containers. This application is a core business area for Nuclear Filter Technology and will provide a basis for creating sensor products that are used in other licensed fields of use. Activities included design and construction of prototype product, product testing and debugging, and finalizing a prototype for initial field tests.

Final report on reliability and lifetime prediction.

Energy Technology Data Exchange (ETDEWEB)

Gillen, Kenneth T; Wise, Jonathan; Jones, Gary D.; Causa, Al G.; Terrill, Edward R.; Borowczak, Marc

2012-12-01

This document highlights the important results obtained from the subtask of the Goodyear CRADA devoted to better understanding reliability of tires and to developing better lifetime prediction methods. The overall objective was to establish the chemical and physical basis for the degradation of tires using standard as well as unique models and experimental techniques. Of particular interest was the potential application of our unique modulus profiling apparatus for assessing tire properties and for following tire degradation. During the course of this complex investigation, extensive relevant information was generated, including experimental results, data analyses and development of models and instruments. Detailed descriptions of the findings are included in this report.

Final Report of a CRADA Between Pacific Northwest National Laboratory and Cummins, Incorporated (CRADA No.PNNL/283): “Enhanced High and Low Temperature Performance of NO_x Reduction Catalyst Materials”

Energy Technology Data Exchange (ETDEWEB)

Gao, Feng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Szanyi, Janos [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Yilin [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wang, Yong [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Peden, Charles HF [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Howden, Ken [US Dept. of Energy, Washington, DC (United States); Currier, Neal [Cummins Inc., Columbus, IN (United States); Kamasamudram, Krishna [Cummins Inc., Columbus, IN (United States); Kumar, Ashok [Cummins Inc., Columbus, IN (United States); Li, J. [Cummins Inc., Columbus, IN (United States); Stafford, R. J. [Cummins Inc., Columbus, IN (United States); Yezerets, Aleksey [Cummins Inc., Columbus, IN (United States); Luo, J. [Cummins Inc., Columbus, IN (United States); Chen, H. Y. [Johnson Matthey Company, Royston (United Kingdom)

2016-09-01

of the most daunting challenges in R&D on new catalyst materials and processes that can effectively eliminate emissions at these quite low exhaust temperatures. This project has two clear focuses: (1) development of potassium-based high-temperature NSR materials, and studying their key causes of deactivation and methods of regeneration. By comparing results obtained on ‘Simple Model’ Pt-K/Al₂O₃ with ‘Enhanced Model’ Pt-K/ MgAlO_x and Pt-K/TiO₂ materials, we have developed an understanding of the role of various additives on the deactivation and regeneration processes. Studies have also been performed on the real commercial samples being used in a Dodge Ram truck with a Cummins diesel emission control system. However, the results about these ‘commercial samples’ will not be covered in this report. Following a brief description of our experimental approach, we will present a few highlights from some of the work performed in this CRADA with more details about these results provided in publications/reports/presentations lists presented at the end of the report. (2) for the Cu and Fe/Chabazite SCR catalysts, since these are so newly developed and references from open literature and industry are nearly absent, our work started from zeolite synthesis and catalyst synthesis methodology development, before research on their low- and high-temperature performance, deactivation, regeneration, etc. was conducted. Again, most work reported here is based on our “model” catalysts synthesized in-house. Work done on the ‘commercial samples’ will not be covered in this report.

["Unintended consequences of scientific discoveries" or: "Heterogeny of purposes" as phenomena of the history of science].

Science.gov (United States)

Wittkau-Horgby, A

2001-01-01

This paper deals with an old observation in respect to man's action--the problem of unintended consequences of human action. It presents the scientific approaches to this phenomenon in the 18th century and focusses then on the problem of unintended consequences of scientific discoveries. Using the prominent examples of Copernicus and Darwin the author shows that the actual outcomes and final effects of scientific discoveries must not necessarily be the originally intended ones. On the contrary, especially those results of scientific discoveries which have affected the sphere of world view (Weltanschauung) like the research works of Copernicus and Darwin were originally meant to be only scientific studies. The final results in respect to the world view were on Copernicus' side not even realized and on Darwin's side neither intended nor welcomed. The conclusion of this analysis is that due to the fact that both scientists did not have the intention to change the world view they can only partly be regarded to be responsible for the fundamental changes they finally caused.

Astroparticle physics: puzzles and discoveries

International Nuclear Information System (INIS)

Berezinsky, V

2008-01-01

Puzzles often give birth to the great discoveries, the false discoveries sometimes stimulate the exiting ideas in theoretical physics. The historical examples of both are described in Introduction and in section 'Cosmological Puzzles'. From existing puzzles most attention is given to Ultra High Energy Cosmic Ray (UHECR) puzzle and to cosmological constant problem. The 40-years old UHECR problem consisted in absence of the sharp steepening in spectrum of extragalactic cosmic rays caused by interaction with CMB radiation. This steepening is known as Greisen-Zatsepin-Kuzmin (GZK) cutoff. It is demonstrated here that the features of interaction of cosmic ray protons with CMB are seen now in the spectrum in the form of the dip and beginning of the GZK cutoff. The most serious cosmological problem is caused by large vacuum energy of the known elementary-particle fields which exceeds at least by 45 orders of magnitude the cosmological vacuum energy. The various ideas put forward to solve this problem during last 40 years, have weaknesses and cannot be accepted as the final solution of this puzzle. The anthropic approach is discussed

Computer-Aided Drug Discovery in Plant Pathology.

Science.gov (United States)

Shanmugam, Gnanendra; Jeon, Junhyun

2017-12-01

Control of plant diseases is largely dependent on use of agrochemicals. However, there are widening gaps between our knowledge on plant diseases gained from genetic/mechanistic studies and rapid translation of the knowledge into target-oriented development of effective agrochemicals. Here we propose that the time is ripe for computer-aided drug discovery/design (CADD) in molecular plant pathology. CADD has played a pivotal role in development of medically important molecules over the last three decades. Now, explosive increase in information on genome sequences and three dimensional structures of biological molecules, in combination with advances in computational and informational technologies, opens up exciting possibilities for application of CADD in discovery and development of agrochemicals. In this review, we outline two categories of the drug discovery strategies: structure- and ligand-based CADD, and relevant computational approaches that are being employed in modern drug discovery. In order to help readers to dive into CADD, we explain concepts of homology modelling, molecular docking, virtual screening, and de novo ligand design in structure-based CADD, and pharmacophore modelling, ligand-based virtual screening, quantitative structure activity relationship modelling and de novo ligand design for ligand-based CADD. We also provide the important resources available to carry out CADD. Finally, we present a case study showing how CADD approach can be implemented in reality for identification of potent chemical compounds against the important plant pathogens, Pseudomonas syringae and Colletotrichum gloeosporioides .

STS-91 Launch of Discovery from Launch Pad 39-A

Science.gov (United States)

1998-01-01

Searing the early evening sky with its near sun-like rocket exhaust, the Space Shuttle Discovery lifts off from Launch Pad 39A at 6:06:24 p.m. EDT June 2 on its way to the Mir space station. On board Discovery are Mission Commander Charles J. Precourt; Pilot Dominic L. Gorie; and Mission Specialists Wendy B. Lawrence, Franklin R. Chang-Diaz, Janet Lynn Kavandi and Valery Victorovitch Ryumin. The nearly 10-day mission will feature the ninth and final Shuttle docking with the Russian space station Mir, the first Mir docking for the Space Shuttle orbiter Discovery, the first on-orbit test of the Alpha Magnetic Spectrometer (AMS), and the first flight of the new Space Shuttle super lightweight external tank. Astronaut Andrew S. W. Thomas will be returning to Earth as a STS-91 crew member after living more than four months aboard Mir.

Topology Discovery Using Cisco Discovery Protocol

OpenAIRE

Rodriguez, Sergio R.

2009-01-01

In this paper we address the problem of discovering network topology in proprietary networks. Namely, we investigate topology discovery in Cisco-based networks. Cisco devices run Cisco Discovery Protocol (CDP) which holds information about these devices. We first compare properties of topologies that can be obtained from networks deploying CDP versus Spanning Tree Protocol (STP) and Management Information Base (MIB) Forwarding Database (FDB). Then we describe a method of discovering topology ...

77 FR 49011 - Privacy Act of 1974; New System of Records, Office of General Counsel E-Discovery Management...

Science.gov (United States)

2012-08-15

... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5613-N-06-A] Privacy Act of 1974; New System of Records, Office of General Counsel E-Discovery Management System--Change in Final Effective... the OGC E-Discovery Management System until after the opportunity for further comment is provided to...

New Generation Discovery: A Systematic View for Its Development, Issues and Future

KAUST Repository

Yu, Yi

2012-11-01

Collecting, storing, discovering, and locating are integral parts of the composition of the library. To fully utilize the library and achieve its ultimate value, the construction and production of discovery has always been a central part of the library’s practice and identity. That is the reason why the new generation (also called the next-generation discovery) discovery gets such striking effect since it came into library automation arena. However, when we talk about the new generation of discovery in the library domain, we should see it in the entirety of the library as one of its organic parts and consider its progress along with the evolution of the whole library world. We should have a deeper understanding about its relationship and interaction with the internet, the rapidly changing digital environment, and the elements and the chain of library services. To address above issues, this paper overviews the different versions of the definition for the new generation discovery by combining our own understanding. The paper also gives our own description for its properties and characteristics. The paper points out what challenges, which extends the technology domain to commercial interests and business strategy, are faced by the discovery applications, and how library and library professionals deal with those challenges. Finally, the paper elaborates on the promise brought by the new discovery development and what the next exploration might be for its future.

Final Report - A DEEPER LOOK AT THE VISUALIZATION OF SCIENTIFIC DISCOVERY IN THE FEDERAL CONTEXT

Energy Technology Data Exchange (ETDEWEB)

Cozzens, Susan; Lane, Julia

2008-09-12

The visualization of scientific discovery has reached an intriguing point of development. Researchers in the field are producing fascinating representations that are catching the attention of program officers and policymakers. The accomplishments are being driven by the availability of both large scale data sets and the computing power and algorithms to analyze them.

SemaTyP: a knowledge graph based literature mining method for drug discovery.

Science.gov (United States)

Sang, Shengtian; Yang, Zhihao; Wang, Lei; Liu, Xiaoxia; Lin, Hongfei; Wang, Jian

2018-05-30

Drug discovery is the process through which potential new medicines are identified. High-throughput screening and computer-aided drug discovery/design are the two main drug discovery methods for now, which have successfully discovered a series of drugs. However, development of new drugs is still an extremely time-consuming and expensive process. Biomedical literature contains important clues for the identification of potential treatments. It could support experts in biomedicine on their way towards new discoveries. Here, we propose a biomedical knowledge graph-based drug discovery method called SemaTyP, which discovers candidate drugs for diseases by mining published biomedical literature. We first construct a biomedical knowledge graph with the relations extracted from biomedical abstracts, then a logistic regression model is trained by learning the semantic types of paths of known drug therapies' existing in the biomedical knowledge graph, finally the learned model is used to discover drug therapies for new diseases. The experimental results show that our method could not only effectively discover new drug therapies for new diseases, but also could provide the potential mechanism of action of the candidate drugs. In this paper we propose a novel knowledge graph based literature mining method for drug discovery. It could be a supplementary method for current drug discovery methods.

Knowledge-Based Topic Model for Unsupervised Object Discovery and Localization.

Science.gov (United States)

Niu, Zhenxing; Hua, Gang; Wang, Le; Gao, Xinbo

Unsupervised object discovery and localization is to discover some dominant object classes and localize all of object instances from a given image collection without any supervision. Previous work has attempted to tackle this problem with vanilla topic models, such as latent Dirichlet allocation (LDA). However, in those methods no prior knowledge for the given image collection is exploited to facilitate object discovery. On the other hand, the topic models used in those methods suffer from the topic coherence issue-some inferred topics do not have clear meaning, which limits the final performance of object discovery. In this paper, prior knowledge in terms of the so-called must-links are exploited from Web images on the Internet. Furthermore, a novel knowledge-based topic model, called LDA with mixture of Dirichlet trees, is proposed to incorporate the must-links into topic modeling for object discovery. In particular, to better deal with the polysemy phenomenon of visual words, the must-link is re-defined as that one must-link only constrains one or some topic(s) instead of all topics, which leads to significantly improved topic coherence. Moreover, the must-links are built and grouped with respect to specific object classes, thus the must-links in our approach are semantic-specific , which allows to more efficiently exploit discriminative prior knowledge from Web images. Extensive experiments validated the efficiency of our proposed approach on several data sets. It is shown that our method significantly improves topic coherence and outperforms the unsupervised methods for object discovery and localization. In addition, compared with discriminative methods, the naturally existing object classes in the given image collection can be subtly discovered, which makes our approach well suited for realistic applications of unsupervised object discovery.Unsupervised object discovery and localization is to discover some dominant object classes and localize all of object

Melodic pattern discovery by structural analysis via wavelets and clustering techniques

DEFF Research Database (Denmark)

Velarde, Gissel; Meredith, David

We present an automatic method to support melodic pattern discovery by structural analysis of symbolic representations by means of wavelet analysis and clustering techniques. In previous work, we used the method to recognize the parent works of melodic segments, or to classify tunes into tune......-means to cluster melodic segments into groups of measured similarity and obtain a raking of the most prototypical melodic segments or patterns and their occurrences. We test the method on the JKU Patterns Development Database and evaluate it based on the ground truth defined by the MIREX 2013 Discovery of Repeated...... Themes & Sections task. We compare the results of our method to the output of geometric approaches. Finally, we discuss about the relevance of our wavelet-based analysis in relation to structure, pattern discovery, similarity and variation, and comment about the considerations of the method when used...

14 CFR 406.143 - Discovery.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Discovery. 406.143 Section 406.143... Transportation Adjudications § 406.143 Discovery. (a) Initiation of discovery. Any party may initiate discovery... after a complaint has been filed. (b) Methods of discovery. The following methods of discovery are...

Neighbor discovery in multi-hop wireless networks: evaluation and dimensioning with interferences considerations

Directory of Open Access Journals (Sweden)

Elyes Ben Hamida

2008-04-01

Full Text Available In this paper, we study the impact of collisions and interferences on a neighbor discovery process in the context of multi-hop wireless networks. We consider three models in which interferences and collisions are handled in very different ways. From an ideal channel where simultaneous transmissions do not interfere, we derive an alternate channel where simultaneous transmissions are considered two-by-two under the form of collisions, to finally reach a more realistic channel where simultaneous transmissions are handled under the form of shot-noise interferences. In these models, we analytically compute the link probability success between two neighbors as well as the expected number of nodes that correctly receive a Hello packet. Using this analysis, we show that if the neighbor discovery process is asymptotically equivalent in the three models, it offers very different behaviors locally in time. In particular, the scalability of the process is not the same depending on the way interferences are handled. Finally, we apply our results to the dimensioning of a Hello protocol parameters. We propose a method to adapt the protocol parameters to meet application constraints on the neighbor discovery process and to minimize the protocol energy consumption.

Higgs Discovery

DEFF Research Database (Denmark)

Sannino, Francesco

2013-01-01

has been challenged by the discovery of a not-so-heavy Higgs-like state. I will therefore review the recent discovery \\cite{Foadi:2012bb} that the standard model top-induced radiative corrections naturally reduce the intrinsic non-perturbative mass of the composite Higgs state towards the desired...... via first principle lattice simulations with encouraging results. The new findings show that the recent naive claims made about new strong dynamics at the electroweak scale being disfavoured by the discovery of a not-so-heavy composite Higgs are unwarranted. I will then introduce the more speculative......I discuss the impact of the discovery of a Higgs-like state on composite dynamics starting by critically examining the reasons in favour of either an elementary or composite nature of this state. Accepting the standard model interpretation I re-address the standard model vacuum stability within...

How Formal Methods Impels Discovery: A Short History of an Air Traffic Management Project

Science.gov (United States)

Butler, Ricky W.; Hagen, George; Maddalon, Jeffrey M.; Munoz, Cesar A.; Narkawicz, Anthony; Dowek, Gilles

2010-01-01

In this paper we describe a process of algorithmic discovery that was driven by our goal of achieving complete, mechanically verified algorithms that compute conflict prevention bands for use in en route air traffic management. The algorithms were originally defined in the PVS specification language and subsequently have been implemented in Java and C++. We do not present the proofs in this paper: instead, we describe the process of discovery and the key ideas that enabled the final formal proof of correctness

The discovery of the periodic table as a case of simultaneous discovery.

Science.gov (United States)

Scerri, Eric

2015-03-13

The article examines the question of priority and simultaneous discovery in the context of the discovery of the periodic system. It is argued that rather than being anomalous, simultaneous discovery is the rule. Moreover, I argue that the discovery of the periodic system by at least six authors in over a period of 7 years represents one of the best examples of a multiple discovery. This notion is supported by a new view of the evolutionary development of science through a mechanism that is dubbed Sci-Gaia by analogy with Lovelock's Gaia hypothesis. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Open Access Target Validation Is a More Efficient Way to Accelerate Drug Discovery

Science.gov (United States)

Lee, Wen Hwa

2015-01-01

There is a scarcity of novel treatments to address many unmet medical needs. Industry and academia are finally coming to terms with the fact that the prevalent models and incentives for innovation in early stage drug discovery are failing to promote progress quickly enough. Here we will examine how an open model of precompetitive public–private research partnership is enabling efficient derisking and acceleration in the early stages of drug discovery, whilst also widening the range of communities participating in the process, such as patient and disease foundations. PMID:26042736

Beyond Discovery

DEFF Research Database (Denmark)

Korsgaard, Steffen; Sassmannshausen, Sean Patrick

2017-01-01

In this chapter we explore four alternatives to the dominant discovery view of entrepreneurship; the development view, the construction view, the evolutionary view, and the Neo-Austrian view. We outline the main critique points of the discovery presented in these four alternatives, as well...

Cosmology Without Finality

Science.gov (United States)

Mahootian, F.

2009-12-01

The rapid convergence of advancing sensor technology, computational power, and knowledge discovery techniques over the past decade has brought unprecedented volumes of astronomical data together with unprecedented capabilities of data assimilation and analysis. A key result is that a new, data-driven "observational-inductive'' framework for scientific inquiry is taking shape and proving viable. The anticipated rise in data flow and processing power will have profound effects, e.g., confirmations and disconfirmations of existing theoretical claims both for and against the big bang model. But beyond enabling new discoveries can new data-driven frameworks of scientific inquiry reshape the epistemic ideals of science? The history of physics offers a comparison. The Bohr-Einstein debate over the "completeness'' of quantum mechanics centered on a question of ideals: what counts as science? We briefly examine lessons from that episode and pose questions about their applicability to cosmology. If the history of 20th century physics is any indication, the abandonment of absolutes (e.g., space, time, simultaneity, continuity, determinacy) can produce fundamental changes in understanding. The classical ideal of science, operative in both physics and cosmology, descends from the European Enlightenment. This ideal has for over 200 years guided science to seek the ultimate order of nature, to pursue the absolute theory, the "theory of everything.'' But now that we have new models of scientific inquiry powered by new technologies and driven more by data than by theory, it is time, finally, to relinquish dreams of a "final'' theory.

"Eureka, Eureka!" Discoveries in Science

Science.gov (United States)

Agarwal, Pankaj

2011-01-01

Accidental discoveries have been of significant value in the progress of science. Although accidental discoveries are more common in pharmacology and chemistry, other branches of science have also benefited from such discoveries. While most discoveries are the result of persistent research, famous accidental discoveries provide a fascinating…

30 CFR 44.24 - Discovery.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Discovery. 44.24 Section 44.24 Mineral... Discovery. Parties shall be governed in their conduct of discovery by appropriate provisions of the Federal... discovery. Alternative periods of time for discovery may be prescribed by the presiding administrative law...

19 CFR 356.20 - Discovery.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Discovery. 356.20 Section 356.20 Customs Duties... § 356.20 Discovery. (a) Voluntary discovery. All parties are encouraged to engage in voluntary discovery... sanctions proceeding. (b) Limitations on discovery. The administrative law judge shall place such limits...

Chemical Discovery

Science.gov (United States)

Brown, Herbert C.

1974-01-01

The role of discovery in the advance of the science of chemistry and the factors that are currently operating to handicap that function are considered. Examples are drawn from the author's work with boranes. The thesis that exploratory research and discovery should be encouraged is stressed. (DT)

24 CFR 180.500 - Discovery.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Discovery. 180.500 Section 180.500... OPPORTUNITY CONSOLIDATED HUD HEARING PROCEDURES FOR CIVIL RIGHTS MATTERS Discovery § 180.500 Discovery. (a) In general. This subpart governs discovery in aid of administrative proceedings under this part. Discovery in...

22 CFR 224.21 - Discovery.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Discovery. 224.21 Section 224.21 Foreign....21 Discovery. (a) The following types of discovery are authorized: (1) Requests for production of... parties, discovery is available only as ordered by the ALJ. The ALJ shall regulate the timing of discovery...

77 FR 38770 - Notice of Consortium on “nSoft Consortium”

Science.gov (United States)

2012-06-29

... Development Agreement (``CRADA'') with NIST. Membership is limited to 40 for-profit institutions and 15 not... by Member to NIST at the time of CRADA execution and annually in August thereafter. For-profit... Thousand ($10,000), payable at the time of CRADA execution. Subsequent membership payments of Twenty...

77 FR 25488 - Cooperative Research and Development Agreement: Federally Integrated Communications System

Science.gov (United States)

2012-04-30

... Cooperative Research and Development Agreement (CRADA) with General Dynamics C4 Systems, Inc. to lab.... The Coast Guard invites public comment on the proposed CRADA, and also invites other potential non... material on the proposed CRADA must either be submitted to our online docket via http://www.regulations.gov...

19 CFR 207.109 - Discovery.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Discovery. 207.109 Section 207.109 Customs Duties... and Committee Proceedings § 207.109 Discovery. (a) Discovery methods. All parties may obtain discovery under such terms and limitations as the administrative law judge may order. Discovery may be by one or...

15 CFR 25.21 - Discovery.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Discovery. 25.21 Section 25.21... Discovery. (a) The following types of discovery are authorized: (1) Requests for production of documents for..., discovery is available only as ordered by the ALJ. The ALJ shall regulate the timing of discovery. (d...

A replacement LH2 recirculation line before installation in Discovery

Science.gov (United States)

1999-01-01

A spare four-inch diameter LH2 recirculation line (shown in photo) will be used to replace a damaged LH2 line in the orbiter Discovery. The line recirculates hydrogen from the Shuttle main engines back to the external tank during prelaunch engine conditioning. Workers noted a dent in the line during routine aft compartment inspections Tuesday, Dec. 7. The dent measures 12 inches long and about =-inch deep. Managers expect the replacement work to take about 3 days, followed by system retests and final aft compartment close-outs. Preliminary assessments reflect a launch date of Space Shuttle Discovery on mission STS-103 no earlier than Dec. 16. STS-103 is the third servicing mission for the Hubble Space Telescope.

39 CFR 963.14 - Discovery.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Discovery. 963.14 Section 963.14 Postal Service... PANDERING ADVERTISEMENTS STATUTE, 39 U.S.C. 3008 § 963.14 Discovery. Discovery is to be conducted on a... such discovery as he or she deems reasonable and necessary. Discovery may include one or more of the...

77 FR 71211 - Request for Information: Establish a Public-Private Collaboration, “Drug Development Initiative...

Science.gov (United States)

2012-11-29

... Agreement (CRADA) under the authority of the Federal Technology Transfer Act of 1986 (FTTA), Public Law 99-502, codified as amended in scattered sections of title 15, United States Code (U.S.C.). The CRADA... DDI focused on new pharmacological treatments for PTSD. Collaborations will be delineated via a CRADA...

Cooperative Research and Development Agreement Final Report for Cooperative Research and Development Agreement Number ORNL93-0237 Adhesive Bonding Technologies for Automotive Structural Composites; TOPICAL

International Nuclear Information System (INIS)

Boeman, R.G.

2001-01-01

In 1993, the Oak Ridge National Laboratory (ORNL) entered into a Cooperative Research and Development Agreement (CRADA) with the Automotive Composites Consortium (ACC) to conduct research and development that would overcome technological hurdles to the adhesive bonding of current and future automotive materials. This effort is part of a larger Department of Energy (DOE) program to promote the use of lighter weight materials in automotive structures for the purpose of increasing fuel efficiency and reducing environmental pollutant emissions. In accomplishing this mission, the bonding of similar and dissimilar materials was identified as being of primary importance to the automotive industry since this enabling technology would give designers the freedom to choose from an expanded menu of low mass materials for component weight reduction. The research undertaken under this CRADA addresses the following areas of importance: bulk material characterization, structural fracture mechanics, modeling/characterization, process control and nondestructive evaluation (PC/NDE), manufacturing demonstration, and advanced processing. For the bulk material characterization task, the individual material properties of the adherends and adhesives were characterized. This included generating a database of mechanical and physical properties, after identifying and developing standard test methods to obtain properties. The structural fracture mechanics task concentrated on test development to characterize the fracture toughness of adhesively bonded joints subjected to Mode I, Mode II and mixed-mode conditions. Standard test procedures for quantifying an adhesive/adherend system's resistance to crack growth were developed for use by industry. In the modeling/characterization task, fracture mechanics-based design guidelines and predictive methodologies have been developed which will facilitate iteration on design concepts for bonded joints while alleviating the need for extensive testing

Semantic based cluster content discovery in description first clustering algorithm

International Nuclear Information System (INIS)

Khan, M.W.; Asif, H.M.S.

2017-01-01

In the field of data analytics grouping of like documents in textual data is a serious problem. A lot of work has been done in this field and many algorithms have purposed. One of them is a category of algorithms which firstly group the documents on the basis of similarity and then assign the meaningful labels to those groups. Description first clustering algorithm belong to the category in which the meaningful description is deduced first and then relevant documents are assigned to that description. LINGO (Label Induction Grouping Algorithm) is the algorithm of description first clustering category which is used for the automatic grouping of documents obtained from search results. It uses LSI (Latent Semantic Indexing); an IR (Information Retrieval) technique for induction of meaningful labels for clusters and VSM (Vector Space Model) for cluster content discovery. In this paper we present the LINGO while it is using LSI during cluster label induction and cluster content discovery phase. Finally, we compare results obtained from the said algorithm while it uses VSM and Latent semantic analysis during cluster content discovery phase. (author)

Discovery and Characterization of a Higgs boson using four-lepton events from the CMS

Energy Technology Data Exchange (ETDEWEB)

Martin, Christopher Blake [Johns Hopkins Univ., Baltimore, MD (United States)

2015-07-01

A new particle decaying to a pair of vector bosons was discovered in 2012 by the ATLAS and CMS experiments at the Large Hadron Collider. In the wake of this discovery a rush of measurements was made to characterize this particle. The fourlepton final state has been instrumental in both the discovery and characterization of this new particle. With only about 20 events seen in the resonance peak at 125 GeV the CMS experiment has been able to make considerable progress in characterizing the Higgs-like boson using the wealth of information in this final state in concert with other decay modes. In addition to the search for this new boson we present three recent results in the study of the Higgs-like boson properties: studies of the production mode, total width, and spin-parity quantum numbers.

Dual Manifold System for Arraying Biomolecules; FINAL

International Nuclear Information System (INIS)

Doktycz, M.J.

2001-01-01

The objective of this CRADA is to establish a new approach to fluid transfer and array construction. This new approach will involve a high-speed, multiplexed fluid distribution valve and ink jet valves. It will enable the parallel handling of multiple reagents for a system that will have multiple applications in addition to the high-speed construction of microarrays. The primary tasks involve proof of principle experiments aimed at establishing key components of the technology and evaluating various optional configurations. The basic platform for evaluating the technology will be set-up by the Contractor at Oak Ridge National Laboratory (ORNL) and will employ custom valving prepared by Rheodyne. The test platform will consist of a motion controller, 3-axes of motion, software, and pneumatic control; and will be used to evaluate the hybrid valve

Usability of Discovery Portals

OpenAIRE

Bulens, J.D.; Vullings, L.A.E.; Houtkamp, J.M.; Vanmeulebrouk, B.

2013-01-01

As INSPIRE progresses to be implemented in the EU, many new discovery portals are built to facilitate finding spatial data. Currently the structure of the discovery portals is determined by the way spatial data experts like to work. However, we argue that the main target group for discovery portals are not spatial data experts but professionals with limited spatial knowledge, and a focus outside the spatial domain. An exploratory usability experiment was carried out in which three discovery p...

A collaborative filtering-based approach to biomedical knowledge discovery.

Science.gov (United States)

Lever, Jake; Gakkhar, Sitanshu; Gottlieb, Michael; Rashnavadi, Tahereh; Lin, Santina; Siu, Celia; Smith, Maia; Jones, Martin R; Krzywinski, Martin; Jones, Steven J M; Wren, Jonathan

2018-02-15

The increase in publication rates makes it challenging for an individual researcher to stay abreast of all relevant research in order to find novel research hypotheses. Literature-based discovery methods make use of knowledge graphs built using text mining and can infer future associations between biomedical concepts that will likely occur in new publications. These predictions are a valuable resource for researchers to explore a research topic. Current methods for prediction are based on the local structure of the knowledge graph. A method that uses global knowledge from across the knowledge graph needs to be developed in order to make knowledge discovery a frequently used tool by researchers. We propose an approach based on the singular value decomposition (SVD) that is able to combine data from across the knowledge graph through a reduced representation. Using cooccurrence data extracted from published literature, we show that SVD performs better than the leading methods for scoring discoveries. We also show the diminishing predictive power of knowledge discovery as we compare our predictions with real associations that appear further into the future. Finally, we examine the strengths and weaknesses of the SVD approach against another well-performing system using several predicted associations. All code and results files for this analysis can be accessed at https://github.com/jakelever/knowledgediscovery. sjones@bcgsc.ca. Supplementary data are available at Bioinformatics online. © The Author (2017). Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com

19 CFR 354.10 - Discovery.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Discovery. 354.10 Section 354.10 Customs Duties... ANTIDUMPING OR COUNTERVAILING DUTY ADMINISTRATIVE PROTECTIVE ORDER § 354.10 Discovery. (a) Voluntary discovery. All parties are encouraged to engage in voluntary discovery procedures regarding any matter, not...

36 CFR 1150.63 - Discovery.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Discovery. 1150.63 Section... PRACTICE AND PROCEDURES FOR COMPLIANCE HEARINGS Prehearing Conferences and Discovery § 1150.63 Discovery. (a) Parties are encouraged to engage in voluntary discovery procedures. For good cause shown under...

37 CFR 11.52 - Discovery.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Discovery. 11.52 Section 11... Disciplinary Proceedings; Jurisdiction, Sanctions, Investigations, and Proceedings § 11.52 Discovery. Discovery... establishes that discovery is reasonable and relevant, the hearing officer, under such conditions as he or she...

Leveraging ecological theory to guide natural product discovery.

Science.gov (United States)

Smanski, Michael J; Schlatter, Daniel C; Kinkel, Linda L

2016-03-01

Technological improvements have accelerated natural product (NP) discovery and engineering to the point that systematic genome mining for new molecules is on the horizon. NP biosynthetic potential is not equally distributed across organisms, environments, or microbial life histories, but instead is enriched in a number of prolific clades. Also, NPs are not equally abundant in nature; some are quite common and others markedly rare. Armed with this knowledge, random 'fishing expeditions' for new NPs are increasingly harder to justify. Understanding the ecological and evolutionary pressures that drive the non-uniform distribution of NP biosynthesis provides a rational framework for the targeted isolation of strains enriched in new NP potential. Additionally, ecological theory leads to testable hypotheses regarding the roles of NPs in shaping ecosystems. Here we review several recent strain prioritization practices and discuss the ecological and evolutionary underpinnings for each. Finally, we offer perspectives on leveraging microbial ecology and evolutionary biology for future NP discovery.

Usability of Discovery Portals

NARCIS (Netherlands)

Bulens, J.D.; Vullings, L.A.E.; Houtkamp, J.M.; Vanmeulebrouk, B.

2013-01-01

As INSPIRE progresses to be implemented in the EU, many new discovery portals are built to facilitate finding spatial data. Currently the structure of the discovery portals is determined by the way spatial data experts like to work. However, we argue that the main target group for discovery portals

14 CFR 16.213 - Discovery.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Discovery. 16.213 Section 16.213... PRACTICE FOR FEDERALLY-ASSISTED AIRPORT ENFORCEMENT PROCEEDINGS Hearings § 16.213 Discovery. (a) Discovery... discovery permitted by this section if a party shows that— (1) The information requested is cumulative or...

28 CFR 76.21 - Discovery.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Discovery. 76.21 Section 76.21 Judicial... POSSESSION OF CERTAIN CONTROLLED SUBSTANCES § 76.21 Discovery. (a) Scope. Discovery under this part covers... as a general guide for discovery practices in proceedings before the Judge. However, unless otherwise...

Machine-assisted discovery of relationships in astronomy

Science.gov (United States)

Graham, Matthew J.; Djorgovski, S. G.; Mahabal, Ashish A.; Donalek, Ciro; Drake, Andrew J.

2013-05-01

High-volume feature-rich data sets are becoming the bread-and-butter of 21st century astronomy but present significant challenges to scientific discovery. In particular, identifying scientifically significant relationships between sets of parameters is non-trivial. Similar problems in biological and geosciences have led to the development of systems which can explore large parameter spaces and identify potentially interesting sets of associations. In this paper, we describe the application of automated discovery systems of relationships to astronomical data sets, focusing on an evolutionary programming technique and an information-theory technique. We demonstrate their use with classical astronomical relationships - the Hertzsprung-Russell diagram and the Fundamental Plane of elliptical galaxies. We also show how they work with the issue of binary classification which is relevant to the next generation of large synoptic sky surveys, such as the Large Synoptic Survey Telescope (LSST). We find that comparable results to more familiar techniques, such as decision trees, are achievable. Finally, we consider the reality of the relationships discovered and how this can be used for feature selection and extraction.

A dented LH2 recirculation line is removed from Discovery

Science.gov (United States)

1999-01-01

In the Payload Changeout Room, Launch Pad 39B, United Space Alliance and NASA workers look at the replacement main propulsion system liquid hydrogen recirculation line (left) to be installed in Shuttle Discovery's aft compartment. At right is the dented line that has been removed. The 12-inch-long dent was discovered during routine aft compartment inspections Tuesday, Dec. 7. The line recirculates hydrogen from the Shuttle main engines back to the external tank during prelaunch engine conditioning. The line is being replaced and managers expect the replacement work to take about 3 days, followed by system retests and final aft compartment close-outs. Preliminary assessments reflect a launch date of Space Shuttle Discovery on mission STS-103 no earlier than Dec. 16. STS-103 is the third servicing mission for the Hubble Space Telescope.

Discovery, characterization, and clinical development of the glucagon-like peptides

DEFF Research Database (Denmark)

Drucker, Daniel J; Habener, Joel F; Holst, Jens Juul

2017-01-01

that GLP-2 promotes mucosal growth in the intestine is described, and key findings from both preclinical studies and the GLP-2 clinical development program for short bowel syndrome (SBS) are reviewed. Finally, we summarize recent progress in GLP biology, highlighting emerging concepts and scientific......The discovery, characterization, and clinical development of glucagon-like-peptide-1 (GLP-1) spans more than 30 years and includes contributions from multiple investigators, science recognized by the 2017 Harrington Award Prize for Innovation in Medicine. Herein, we provide perspectives...... on the historical events and key experimental findings establishing the biology of GLP-1 as an insulin-stimulating glucoregulatory hormone. Important attributes of GLP-1 action and enteroendocrine science are reviewed, with emphasis on mechanistic advances and clinical proof-of-concept studies. The discovery...

40 CFR 27.21 - Discovery.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Discovery. 27.21 Section 27.21... Discovery. (a) The following types of discovery are authorized: (1) Requests for production of documents for..., discovery is available only as ordered by the presiding officer. The presiding officer shall regulate the...

37 CFR 41.150 - Discovery.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Discovery. 41.150 Section 41... COMMERCE PRACTICE BEFORE THE BOARD OF PATENT APPEALS AND INTERFERENCES Contested Cases § 41.150 Discovery. (a) Limited discovery. A party is not entitled to discovery except as authorized in this subpart. The...

14 CFR 13.220 - Discovery.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Discovery. 13.220 Section 13.220... INVESTIGATIVE AND ENFORCEMENT PROCEDURES Rules of Practice in FAA Civil Penalty Actions § 13.220 Discovery. (a) Initiation of discovery. Any party may initiate discovery described in this section, without the consent or...

49 CFR 604.38 - Discovery.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Discovery. 604.38 Section 604.38 Transportation... TRANSPORTATION CHARTER SERVICE Hearings. § 604.38 Discovery. (a) Permissible forms of discovery shall be within the discretion of the PO. (b) The PO shall limit the frequency and extent of discovery permitted by...

15 CFR 719.10 - Discovery.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Discovery. 719.10 Section 719.10... Discovery. (a) General. The parties are encouraged to engage in voluntary discovery regarding any matter... the Federal Rules of Civil Procedure relating to discovery apply to the extent consistent with this...

24 CFR 26.18 - Discovery.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Discovery. 26.18 Section 26.18... PROCEDURES Hearings Before Hearing Officers Discovery § 26.18 Discovery. (a) General. The parties are encouraged to engage in voluntary discovery procedures, which may commence at any time after an answer has...

42 CFR 426.532 - Discovery.

Science.gov (United States)

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Discovery. 426.532 Section 426.532 Public Health... § 426.532 Discovery. (a) General rule. If the Board orders discovery, the Board must establish a reasonable timeframe for discovery. (b) Protective order—(1) Request for a protective order. Any party...

49 CFR 1503.633 - Discovery.

Science.gov (United States)

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Discovery. 1503.633 Section 1503.633... Rules of Practice in TSA Civil Penalty Actions § 1503.633 Discovery. (a) Initiation of discovery. Any party may initiate discovery described in this section, without the consent or approval of the ALJ, at...

14 CFR 1264.120 - Discovery.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Discovery. 1264.120 Section 1264.120... PENALTIES ACT OF 1986 § 1264.120 Discovery. (a) The following types of discovery are authorized: (1..., discovery is available only as ordered by the presiding officer. The presiding officer shall regulate the...

22 CFR 128.6 - Discovery.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Discovery. 128.6 Section 128.6 Foreign... Discovery. (a) Discovery by the respondent. The respondent, through the Administrative Law Judge, may... discovery if the interests of national security or foreign policy so require, or if necessary to comply with...

24 CFR 26.42 - Discovery.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Discovery. 26.42 Section 26.42... PROCEDURES Hearings Pursuant to the Administrative Procedure Act Discovery § 26.42 Discovery. (a) General. The parties are encouraged to engage in voluntary discovery procedures, which may commence at any time...

49 CFR 386.37 - Discovery.

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Discovery. 386.37 Section 386.37 Transportation... and Hearings § 386.37 Discovery. (a) Parties may obtain discovery by one or more of the following...; and requests for admission. (b) Discovery may not commence until the matter is pending before the...

29 CFR 1955.32 - Discovery.

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Discovery. 1955.32 Section 1955.32 Labor Regulations...) PROCEDURES FOR WITHDRAWAL OF APPROVAL OF STATE PLANS Preliminary Conference and Discovery § 1955.32 Discovery... allow discovery by any other appropriate procedure, such as by interrogatories upon a party or request...

History of the discovery of the malaria parasites and their vectors

Directory of Open Access Journals (Sweden)

Cox Francis EG

2010-02-01

Full Text Available Abstract Malaria is caused by infection with protozoan parasites belonging to the genus Plasmodium transmitted by female Anopheles species mosquitoes. Our understanding of the malaria parasites begins in 1880 with the discovery of the parasites in the blood of malaria patients by Alphonse Laveran. The sexual stages in the blood were discovered by William MacCallum in birds infected with a related haematozoan, Haemoproteus columbae, in 1897 and the whole of the transmission cycle in culicine mosquitoes and birds infected with Plasmodium relictum was elucidated by Ronald Ross in 1897. In 1898 the Italian malariologists, Giovanni Battista Grassi, Amico Bignami, Giuseppe Bastianelli, Angelo Celli, Camillo Golgi and Ettore Marchiafava demonstrated conclusively that human malaria was also transmitted by mosquitoes, in this case anophelines. The discovery that malaria parasites developed in the liver before entering the blood stream was made by Henry Shortt and Cyril Garnham in 1948 and the final stage in the life cycle, the presence of dormant stages in the liver, was conclusively demonstrated in 1982 by Wojciech Krotoski. This article traces the main events and stresses the importance of comparative studies in that, apart from the initial discovery of parasites in the blood, every subsequent discovery has been based on studies on non-human malaria parasites and related organisms.

42 CFR 426.432 - Discovery.

Science.gov (United States)

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Discovery. 426.432 Section 426.432 Public Health... § 426.432 Discovery. (a) General rule. If the ALJ orders discovery, the ALJ must establish a reasonable timeframe for discovery. (b) Protective order—(1) Request for a protective order. Any party receiving a...

10 CFR 13.21 - Discovery.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Discovery. 13.21 Section 13.21 Energy NUCLEAR REGULATORY COMMISSION PROGRAM FRAUD CIVIL REMEDIES § 13.21 Discovery. (a) The following types of discovery are...) Unless mutually agreed to by the parties, discovery is available only as ordered by the ALJ. The ALJ...

49 CFR 1121.2 - Discovery.

Science.gov (United States)

2010-10-01

... 49 Transportation 8 2010-10-01 2010-10-01 false Discovery. 1121.2 Section 1121.2 Transportation... TRANSPORTATION RULES OF PRACTICE RAIL EXEMPTION PROCEDURES § 1121.2 Discovery. Discovery shall follow the procedures set forth at 49 CFR part 1114, subpart B. Discovery may begin upon the filing of the petition for...

38 CFR 42.21 - Discovery.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Discovery. 42.21 Section... IMPLEMENTING THE PROGRAM FRAUD CIVIL REMEDIES ACT § 42.21 Discovery. (a) The following types of discovery are... creation of a document. (c) Unless mutually agreed to by the parties, discovery is available only as...

22 CFR 521.21 - Discovery.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Discovery. 521.21 Section 521.21 Foreign... Discovery. (a) The following types of discovery are authorized: (1) Requests for production of documents for... interpreted to require the creation of a document. (c) Unless mutually agreed to by the parties, discovery is...

31 CFR 10.71 - Discovery.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Discovery. 10.71 Section 10.71 Money... SERVICE Rules Applicable to Disciplinary Proceedings § 10.71 Discovery. (a) In general. Discovery may be... relevance, materiality and reasonableness of the requested discovery and subject to the requirements of § 10...

39 CFR 955.15 - Discovery.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Discovery. 955.15 Section 955.15 Postal Service... APPEALS § 955.15 Discovery. (a) The parties are encouraged to engage in voluntary discovery procedures. In connection with any deposition or other discovery procedure, the Board may issue any order which justice...

43 CFR 35.21 - Discovery.

Science.gov (United States)

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Discovery. 35.21 Section 35.21 Public... AND STATEMENTS § 35.21 Discovery. (a) The following types of discovery are authorized: (1) Requests...) Unless mutually agreed to by the parties, discovery is available only as ordered by the ALJ. The ALJ...

15 CFR 766.9 - Discovery.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Discovery. 766.9 Section 766.9... PROCEEDINGS § 766.9 Discovery. (a) General. The parties are encouraged to engage in voluntary discovery... provisions of the Federal Rules of Civil Procedure relating to discovery apply to the extent consistent with...

Get Involved in Planetary Discoveries through New Worlds, New Discoveries

Science.gov (United States)

Shupla, Christine; Shipp, S. S.; Halligan, E.; Dalton, H.; Boonstra, D.; Buxner, S.; SMD Planetary Forum, NASA

2013-01-01

"New Worlds, New Discoveries" is a synthesis of NASA’s 50-year exploration history which provides an integrated picture of our new understanding of our solar system. As NASA spacecraft head to and arrive at key locations in our solar system, "New Worlds, New Discoveries" provides an integrated picture of our new understanding of the solar system to educators and the general public! The site combines the amazing discoveries of past NASA planetary missions with the most recent findings of ongoing missions, and connects them to the related planetary science topics. "New Worlds, New Discoveries," which includes the "Year of the Solar System" and the ongoing celebration of the "50 Years of Exploration," includes 20 topics that share thematic solar system educational resources and activities, tied to the national science standards. This online site and ongoing event offers numerous opportunities for the science community - including researchers and education and public outreach professionals - to raise awareness, build excitement, and make connections with educators, students, and the public about planetary science. Visitors to the site will find valuable hands-on science activities, resources and educational materials, as well as the latest news, to engage audiences in planetary science topics and their related mission discoveries. The topics are tied to the big questions of planetary science: how did the Sun’s family of planets and bodies originate and how have they evolved? How did life begin and evolve on Earth, and has it evolved elsewhere in our solar system? Scientists and educators are encouraged to get involved either directly or by sharing "New Worlds, New Discoveries" and its resources with educators, by conducting presentations and events, sharing their resources and events to add to the site, and adding their own public events to the site’s event calendar! Visit to find quality resources and ideas. Connect with educators, students and the public to

13 CFR 134.213 - Discovery.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Discovery. 134.213 Section 134.213... OFFICE OF HEARINGS AND APPEALS Rules of Practice for Most Cases § 134.213 Discovery. (a) Motion. A party may obtain discovery only upon motion, and for good cause shown. (b) Forms. The forms of discovery...

31 CFR 16.21 - Discovery.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Discovery. 16.21 Section 16.21 Money... FRAUD CIVIL REMEDIES ACT OF 1986 § 16.21 Discovery. (a) The following types of discovery are authorized... to require the creation of a document. (c) Unless mutually agreed to by the parties, discovery is...

SpEnD: Linked Data SPARQL Endpoints Discovery Using Search Engines

Science.gov (United States)

Yumusak, Semih; Dogdu, Erdogan; Kodaz, Halife; Kamilaris, Andreas; Vandenbussche, Pierre-Yves

In this study, a novel metacrawling method is proposed for discovering and monitoring linked data sources on the Web. We implemented the method in a prototype system, named SPARQL Endpoints Discovery (SpEnD). SpEnD starts with a "search keyword" discovery process for finding relevant keywords for the linked data domain and specifically SPARQL endpoints. Then, these search keywords are utilized to find linked data sources via popular search engines (Google, Bing, Yahoo, Yandex). By using this method, most of the currently listed SPARQL endpoints in existing endpoint repositories, as well as a significant number of new SPARQL endpoints, have been discovered. Finally, we have developed a new SPARQL endpoint crawler (SpEC) for crawling and link analysis.

Early LHC physics studies What can be obtained before discoveries?

CERN Document Server

AUTHOR|(CDS)2068230

2006-01-01

The Large Hadron Collider will provide an unprecedented quantity of collision data right from the start-up. The challenge for the LHC experiments is the quick use of these data for the final commissioning of the detectors, including calibration, alignment, measuring of detector and trigger efficiencies. A new energy frontier will open up, and measurement of basic Standard Model processes will build a solid basement for any discovery studies.

Decades of Discovery

Science.gov (United States)

2011-06-01

For the past two-and-a-half decades, the Office of Science at the U.S. Department of Energy has been at the forefront of scientific discovery. Over 100 important discoveries supported by the Office of Science are represented in this document.

Discovery and the atom

International Nuclear Information System (INIS)

1989-01-01

''Discovery and the Atom'' tells the story of the founding of nuclear physics. This programme looks at nuclear physics up to the discovery of the neutron in 1932. Animation explains the science of the classic experiments, such as the scattering of alpha particles by Rutherford and the discovery of the nucleus. Archive film shows the people: Lord Rutherford, James Chadwick, Marie Curie. (author)

From crystal to compound: structure-based antimalarial drug discovery.

Science.gov (United States)

Drinkwater, Nyssa; McGowan, Sheena

2014-08-01

Despite a century of control and eradication campaigns, malaria remains one of the world's most devastating diseases. Our once-powerful therapeutic weapons are losing the war against the Plasmodium parasite, whose ability to rapidly develop and spread drug resistance hamper past and present malaria-control efforts. Finding new and effective treatments for malaria is now a top global health priority, fuelling an increase in funding and promoting open-source collaborations between researchers and pharmaceutical consortia around the world. The result of this is rapid advances in drug discovery approaches and technologies, with three major methods for antimalarial drug development emerging: (i) chemistry-based, (ii) target-based, and (iii) cell-based. Common to all three of these approaches is the unique ability of structural biology to inform and accelerate drug development. Where possible, SBDD (structure-based drug discovery) is a foundation for antimalarial drug development programmes, and has been invaluable to the development of a number of current pre-clinical and clinical candidates. However, as we expand our understanding of the malarial life cycle and mechanisms of resistance development, SBDD as a field must continue to evolve in order to develop compounds that adhere to the ideal characteristics for novel antimalarial therapeutics and to avoid high attrition rates pre- and post-clinic. In the present review, we aim to examine the contribution that SBDD has made to current antimalarial drug development efforts, covering hit discovery to lead optimization and prevention of parasite resistance. Finally, the potential for structural biology, particularly high-throughput structural genomics programmes, to identify future targets for drug discovery are discussed.

29 CFR 2700.56 - Discovery; general.

Science.gov (United States)

2010-07-01

...(c) or 111 of the Act has been filed. 30 U.S.C. 815(c) and 821. (e) Completion of discovery... 29 Labor 9 2010-07-01 2010-07-01 false Discovery; general. 2700.56 Section 2700.56 Labor... Hearings § 2700.56 Discovery; general. (a) Discovery methods. Parties may obtain discovery by one or more...

[Medicine in the discovery of America].

Science.gov (United States)

Gómez-Gallo, Alvaro

2003-01-01

The present manuscript aims to record some general aspects of science, and in particular from the beginning of anatomic studies, during the discovery of America. We mention by Vesalio, who was the best known anatomist of his time in the Western world. In addition this establishes the legal origins of the medical profession in Spain and America, with emphasis on distinct treatments, for example, those in Peru and Chile. This manuscript contains anecdotes and accounts of the time, the use of medicines of the day, and the relationship these had with the native medicine. Finally, medical department of Chile is described, together with a mention of the first hospitals of the Republic of Chile.

Electrically Heated Afterburner Final Report CRADA No. TC-0537-93

Energy Technology Data Exchange (ETDEWEB)

Vernazza, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gehrman, F. H. [Retech Services, Inc., Ukiah, CA (United States)

2018-01-24

This project was established as a three-year collaboration to develop and improve an innovative hazardous waste-processing system via the addition of an electrically heated afterburner. The fundamental objective of this project was comprehensive engineering of a plasma-fired afterburner with the goal of delivering a scaled demonstration model to process the gaseous effluent from a Plasma Arc Centrifugal Treatment (PACT) system. The first stage PACT technology has been already well developed by Retech Services, Inc. (Retech).

Improved Fiber Optics Final Report CRADA No. TSB-957-94

Energy Technology Data Exchange (ETDEWEB)

Fox, Glenn [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Univ. of California, Livermore, CA (United States); Wilford, Sandy [Lumenyte futemational Corporation (LIC), Irvine, CA (United States)

2018-01-22

The existing chemistry of Lumenyte® (an illumination fiber optic developed by LIC) was such that the component monomers inherently polymerized to a very hard mass if exposed to environmental IR, UV, or a combination of these frequencies. Lumenyte optic also would cure to a hard mass by exposure to the UV & IR generated by the illuminating lamps-although this could occur at a much slower rate, and the hardening could occur even when the adverse frequencies were filtered. The resultant product did not have the flexibility for the required applications. LIC's objective was to include other monomeric components in the formulation to impart permanent flexibility. LIC sought the expertise and the use of the facilities in the Polymeric Materials Section at LLNL to achieve this objective.

Laser Shot Peening Final Report CRADA No. TC-02059-03

Energy Technology Data Exchange (ETDEWEB)

Stuart, B. C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hackel, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-09-27

This was a collaborative effort between The Regents of the University of California, Lawrence Livermore National Laboratory (LLNL) and Metal Improvement Company, Inc. (MIC), to further develop the laser shot peening technology. This project had an emphasis on laser development and government and military applications including DOE’s natural gas and oil technology program (NGOTP), Yucca Mountain Project (YMP), F-22 Fighter, etc.

Artificial Retina Project: Final Report for CRADA ORNL 01-0625

Energy Technology Data Exchange (ETDEWEB)

Greenbaum, E; Little, J [Second Sight Medical Products

2011-09-01

The U.S. Department of Energy’s Artificial Retina Project is a collaborative, multi-institutional effort to develop an implantable microelectronic retinal prosthesis that restores useful vision to people blinded by retinal diseases. The ultimate goal of the project is to restore reading ability, facial recognition, and unaided mobility in people with retinitis pigmentosa and age-related macular degeneration. The project taps into the unique research technologies and resources developed at DOE national laboratories to surmount the many technical challenges involved with developing a safe, effective, and durable product. The research team includes six DOE national laboratories, four universities, and private industry.

Electron Beam Curing of Polymer Matrix Composites - CRADA Final Report

Energy Technology Data Exchange (ETDEWEB)

Janke, C. J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Howell, Dave [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Norris, Robert E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

1997-05-01

The major cost driver in manufacturing polymer matrix composite (PMC) parts and structures, and one of the elements having the greatest effect on their quality and performance, is the standard thermal cure process. Thermal curing of PMCs requires long cure times and high energy consumption, creates residual thermal stresses in the part, produces volatile toxic by-products, and requires expensive tooling that is tolerant of the high cure temperatures.

Infrared Imaging Camera Final Report CRADA No. TC02061.0

Energy Technology Data Exchange (ETDEWEB)

Roos, E. V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Nebeker, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-09-08

This was a collaborative effort between the University of California, Lawrence Livermore National Laboratory (LLNL) and Cordin Company (Cordin) to enhance the U.S. ability to develop a commercial infrared camera capable of capturing high-resolution images in a l 00 nanoseconds (ns) time frame. The Department of Energy (DOE), under an Initiative for Proliferation Prevention (IPP) project, funded the Russian Federation Nuclear Center All-Russian Scientific Institute of Experimental Physics (RFNC-VNIIEF) in Sarov. VNIIEF was funded to develop a prototype commercial infrared (IR) framing camera and to deliver a prototype IR camera to LLNL. LLNL and Cordin were partners with VNIIEF on this project. A prototype IR camera was delivered by VNIIEF to LLNL in December 2006. In June of 2007, LLNL and Cordin evaluated the camera and the test results revealed that the camera exceeded presently available commercial IR cameras. Cordin believes that the camera can be sold on the international market. The camera is currently being used as a scientific tool within Russian nuclear centers. This project was originally designated as a two year project. The project was not started on time due to changes in the IPP project funding conditions; the project funding was re-directed through the International Science and Technology Center (ISTC), which delayed the project start by over one year. The project was not completed on schedule due to changes within the Russian government export regulations. These changes were directed by Export Control regulations on the export of high technology items that can be used to develop military weapons. The IR camera was on the list that export controls required. The ISTC and Russian government, after negotiations, allowed the delivery of the camera to LLNL. There were no significant technical or business changes to the original project.

Textile Resource Conservation Final Report CRADA No. TC-0699-93

Energy Technology Data Exchange (ETDEWEB)

Cooper, John [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McCreight, Dan J. [Institute of Textile Technology, Charlottesville, VA (United States)

2018-01-22

This project was undertaken to develop and demonstrate on a pilot scale the use of electro-osmotic transport to increase the efficiency of textiles wet processing operations. In particular, we sought to develop a means of rinsing textiles to remove material entrapped between the individual fibers that constitute a yarn. Material trapped within the yarn is slow to exchange with rinse water flowing primarily in the open weave are abetween the yarns. The application of an external field (strength, 5-50 kV /m) requires only a few volts for most fabric thicknesses. This field is sufficient to promote a rapid exchange of material to enhance rinsing and reduce the water required for rinsing from about 20 kg/kg-fabric to 3-6 kg/kg-fabric. We successfully developed technical and economic models of application of the process to the rinsing of many materials of industrial importance, including dyes, tints, chemicals, detergents and dye electrolytes. We demonstrated the process on a pilot plant scale using a translator designed in cooperation with Milliken and Company (Spartanburg, SC).

HCCI Combustion Engines Final Report CRADA No. TC02032.0

Energy Technology Data Exchange (ETDEWEB)

Aceves, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lyford-Pike, E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-09-08

This was a collaborative effort between Lawrence Livermore National Security, LLC (formerly The Regents of the University of California)/Lawrence Livermore National Laboratory (LLNL) and Cummins Engine Company (Cwnmins), to advance the state of the art on HomogeneousCharge Compression-Ignition (HCCI) engines, resulting in a clean, high-efficiency alternative to diesel engines.

A Tale of Two Discoveries: Comparing the Usability of Summon and EBSCO Discovery Service

Science.gov (United States)

Foster, Anita K.; MacDonald, Jean B.

2013-01-01

Web-scale discovery systems are gaining momentum among academic libraries as libraries seek a means to provide their users with a one-stop searching experience. Illinois State University's Milner Library found itself in the unique position of having access to two distinct discovery products, EBSCO Discovery Service and Serials Solutions' Summon.…

Comprehensive Clinical Phenotyping & Genetic Mapping for the Discovery of Autism Susceptibility Genes

Science.gov (United States)

2012-12-05

teaching students with autism spectrum disorders 4.52 Learn strategies for incorporating IEP goals and district standard into daily teaching...W403 Columbus, OH 43205 Final Report Comprehensive Clinical Phenotyping & Genetic Mapping for the Discovery of Autism Susceptibility Genes...QFOXGHDUHDFRGH 1.0 Summary In 2006, the Central Ohio Registry for Autism (CORA) was initiated as a collaboration between Wright-Patterson Air

Oak Ridge National Laboratory Wireless Charging of Electric Vehicles - CRADA Report

Energy Technology Data Exchange (ETDEWEB)

Onar, Omer C [ORNL; Campbell, Steven L [ORNL; Seiber, Larry Eugene [ORNL; White, Cliff P [ORNL; Chinthavali, Madhu Sudhan [ORNL; Tang, Lixin [ORNL; Chambon, Paul H [ORNL; Ozpineci, Burak [ORNL; Smith, David E [ORNL

2016-06-20

Wireless power transfer (WPT) is a paradigm shift in electric-vehicle (EV) charging that offers the consumer an autonomous, safe, and convenient option to conductive charging and its attendant need for cables. With WPT, charging process can be fully automated due to the vehicle and grid side radio communication systems, and is non-contacting; therefore issues with leakage currents, ground faults, and touch potentials do not exist. It also eliminates the need for touching the heavy, bulky, dirty cables and plugs. It eliminates the fear of forgetting to plug-in and running out of charge the following day and eliminates the tripping hazards in public parking lots and in highly populated areas such as shopping malls, recreational areas, parking buildings, etc. Furthermore, the high-frequency magnetic fields employed in power transfer across a large air gap are focused and shielded, so that fringe fields (i.e., magnetic leakage/stray fields) attenuate rapidly over a transition region to levels well below limits set by international standards for the public zone (which starts at the perimeter of the vehicle and includes the passenger cabin). Oak Ridge National Laboratory s approach to WPT charging places strong emphasis on radio communications in the power regulation feedback channel augmented with software control algorithms. The over-arching goal for WPT is minimization of vehicle on-board complexity by keeping the secondary side content confined to coil tuning, rectification, filtering, and interfacing to the regenerative energy-storage system (RESS). This report summarizes the CRADA work between the Oak Ridge National Laboratory and the Toyota Research Institute of North America, Toyota Motor Engineering and Manufacturing North America (TEMA) on the wireless charging of electric vehicles which was funded by Department of Energy under DE-FOA-000667. In this project, ORNL is the lead agency and Toyota TEMA is one of the major partners. Over the course of the project

Reuse-oriented common structure discovery in assembly models

Energy Technology Data Exchange (ETDEWEB)

Wang, Pan; Zhang Jie; Li, Yuan; Yu, Jian Feng [The Ministry of Education Key Lab of Contemporary Design and Integrated Manufacturing Technology, Northwestern Polytechnical University, Xian (China)

2017-01-15

Discovering the common structures in assembly models provides designers with the commonalities that carry significant design knowledge across multiple products, which helps to improve design efficiency and accelerate the design process. In this paper, a discovery method has been developed to obtain the common structure in assembly models. First, this work proposes a graph descriptor that captures both the geometrical and topological information of the assembly model, in which shape vectors and link vectors quantitatively describe the part models and mating relationships, respectively. Then, a clustering step is introduced into the discovery, which clusters the similar parts by comparing the similarities between them. In addition, some rules are also provided to filter the frequent subgraphs in order to obtain the expected results. Compared with the existing method, the proposed approach could overcome the disadvantages by providing an independent description of the part model and taking into consideration the similar parts in assemblies, which leads to a more reasonable result. Finally, some experiments have been carried out and the experimental results demonstrate the effectiveness of the proposed approach.

Reuse-oriented common structure discovery in assembly models

International Nuclear Information System (INIS)

Wang, Pan; Zhang Jie; Li, Yuan; Yu, Jian Feng

2017-01-01

Discovering the common structures in assembly models provides designers with the commonalities that carry significant design knowledge across multiple products, which helps to improve design efficiency and accelerate the design process. In this paper, a discovery method has been developed to obtain the common structure in assembly models. First, this work proposes a graph descriptor that captures both the geometrical and topological information of the assembly model, in which shape vectors and link vectors quantitatively describe the part models and mating relationships, respectively. Then, a clustering step is introduced into the discovery, which clusters the similar parts by comparing the similarities between them. In addition, some rules are also provided to filter the frequent subgraphs in order to obtain the expected results. Compared with the existing method, the proposed approach could overcome the disadvantages by providing an independent description of the part model and taking into consideration the similar parts in assemblies, which leads to a more reasonable result. Finally, some experiments have been carried out and the experimental results demonstrate the effectiveness of the proposed approach

submitter Investigation of the discovery potential for supersymmetry in Tau final states and measurement of the Tau identification efficiency for the ATLAS experiment

CERN Document Server

Lumb, Debra

Despite its success, the Standard Model has a number of short-comings that lead particle physicists to believe the it is only a low-energy approximation of a more fundamental theory. One of the most promising candidates for an extension of the Standard Model is supersymmetry. From 2009 the search for Supersymmetry will be taken into a new energy regime with the Large Hadron Collider (LHC) experiments at CERN. A new inclusive search for SUSY in tau final states has been developed for the ATLAS experiment. The search focuses on the signature of taus, jets and missing transverse energy. Analyses with different jet multiplicities (4, 3 and 2-jets) have been studied. The requirement of the tau significantly reduces the abundant QCD multijet background making the mode potentially more robust than other modes already in use that focus only on jets and missing transverse energy as the signature. The discovery reach for R-parity conserving mSUGRA models has been studied for a centre-of-mass energy of 14 TeV and an int...

29 CFR 2200.208 - Discovery.

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Discovery. 2200.208 Section 2200.208 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH REVIEW COMMISSION RULES OF PROCEDURE Simplified Proceedings § 2200.208 Discovery. Discovery, including requests for admissions, will only be...

47 CFR 65.105 - Discovery.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Discovery. 65.105 Section 65.105... OF RETURN PRESCRIPTION PROCEDURES AND METHODOLOGIES Procedures § 65.105 Discovery. (a) Participants... evidence. (c) Discovery requests pursuant to § 65.105(b), including written interrogatories, shall be filed...

49 CFR 209.313 - Discovery.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Discovery. 209.313 Section 209.313 Transportation... TRANSPORTATION RAILROAD SAFETY ENFORCEMENT PROCEDURES Disqualification Procedures § 209.313 Discovery. (a... parties. Discovery is designed to enable a party to obtain relevant information needed for preparation of...

Quantifying the Ease of Scientific Discovery.

Science.gov (United States)

Arbesman, Samuel

2011-02-01

It has long been known that scientific output proceeds on an exponential increase, or more properly, a logistic growth curve. The interplay between effort and discovery is clear, and the nature of the functional form has been thought to be due to many changes in the scientific process over time. Here I show a quantitative method for examining the ease of scientific progress, another necessary component in understanding scientific discovery. Using examples from three different scientific disciplines - mammalian species, chemical elements, and minor planets - I find the ease of discovery to conform to an exponential decay. In addition, I show how the pace of scientific discovery can be best understood as the outcome of both scientific output and ease of discovery. A quantitative study of the ease of scientific discovery in the aggregate, such as done here, has the potential to provide a great deal of insight into both the nature of future discoveries and the technical processes behind discoveries in science.

15 CFR 280.210 - Discovery.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Discovery. 280.210 Section 280.210... STANDARDS AND TECHNOLOGY, DEPARTMENT OF COMMERCE ACCREDITATION AND ASSESSMENT PROGRAMS FASTENER QUALITY Enforcement § 280.210 Discovery. (a) General. The parties are encouraged to engage in voluntary discovery...

History, Discovery, and Classification of lncRNAs.

Science.gov (United States)

Jarroux, Julien; Morillon, Antonin; Pinskaya, Marina

2017-01-01

The RNA World Hypothesis suggests that prebiotic life revolved around RNA instead of DNA and proteins. Although modern cells have changed significantly in 4 billion years, RNA has maintained its central role in cell biology. Since the discovery of DNA at the end of the nineteenth century, RNA has been extensively studied. Many discoveries such as housekeeping RNAs (rRNA, tRNA, etc.) supported the messenger RNA model that is the pillar of the central dogma of molecular biology, which was first devised in the late 1950s. Thirty years later, the first regulatory non-coding RNAs (ncRNAs) were initially identified in bacteria and then in most eukaryotic organisms. A few long ncRNAs (lncRNAs) such as H19 and Xist were characterized in the pre-genomic era but remained exceptions until the early 2000s. Indeed, when the sequence of the human genome was published in 2001, studies showed that only about 1.2% encodes proteins, the rest being deemed "non-coding." It was later shown that the genome is pervasively transcribed into many ncRNAs, but their functionality remained controversial. Since then, regulatory lncRNAs have been characterized in many species and were shown to be involved in processes such as development and pathologies, revealing a new layer of regulation in eukaryotic cells. This newly found focus on lncRNAs, together with the advent of high-throughput sequencing, was accompanied by the rapid discovery of many novel transcripts which were further characterized and classified according to specific transcript traits.In this review, we will discuss the many discoveries that led to the study of lncRNAs, from Friedrich Miescher's "nuclein" in 1869 to the elucidation of the human genome and transcriptome in the early 2000s. We will then focus on the biological relevance during lncRNA evolution and describe their basic features as genes and transcripts. Finally, we will present a non-exhaustive catalogue of lncRNA classes, thus illustrating the vast complexity of

10 CFR 1013.21 - Discovery.

Science.gov (United States)

2010-01-01

... 10 Energy 4 2010-01-01 2010-01-01 false Discovery. 1013.21 Section 1013.21 Energy DEPARTMENT OF ENERGY (GENERAL PROVISIONS) PROGRAM FRAUD CIVIL REMEDIES AND PROCEDURES § 1013.21 Discovery. (a) The following types of discovery are authorized: (1) Requests for production of documents for inspection and...

37 CFR 2.120 - Discovery.

Science.gov (United States)

2010-07-01

... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Discovery. 2.120 Section 2... COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Procedure in Inter Partes Proceedings § 2.120 Discovery. (a... to disclosure and discovery shall apply in opposition, cancellation, interference and concurrent use...

46 CFR 550.502 - Discovery.

Science.gov (United States)

2010-10-01

... 46 Shipping 9 2010-10-01 2010-10-01 false Discovery. 550.502 Section 550.502 Shipping FEDERAL... Proceedings § 550.502 Discovery. The Commission may authorize a party to a proceeding to use depositions, written interrogatories, and discovery procedures that, to the extent practicable, are in conformity with...

15 CFR 785.8 - Discovery.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Discovery. 785.8 Section 785.8... INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL REGULATIONS ENFORCEMENT § 785.8 Discovery. (a) General. The parties are encouraged to engage in voluntary discovery regarding any matter, not...

22 CFR 35.21 - Discovery.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Discovery. 35.21 Section 35.21 Foreign Relations DEPARTMENT OF STATE CLAIMS AND STOLEN PROPERTY PROGRAM FRAUD CIVIL REMEDIES § 35.21 Discovery. (a) The following types of discovery are authorized: (1) Requests for production of documents for...

45 CFR 96.65 - Discovery.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Discovery. 96.65 Section 96.65 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION BLOCK GRANTS Hearing Procedure § 96.65 Discovery. The use of interrogatories, depositions, and other forms of discovery shall not be allowed. ...

49 CFR 31.21 - Discovery.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Discovery. 31.21 Section 31.21 Transportation Office of the Secretary of Transportation PROGRAM FRAUD CIVIL REMEDIES § 31.21 Discovery. (a) The following types of discovery are authorized: (1) Requests for production of documents for inspection and...

43 CFR 4.1130 - Discovery methods.

Science.gov (United States)

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Discovery methods. 4.1130 Section 4.1130... Special Rules Applicable to Surface Coal Mining Hearings and Appeals Discovery § 4.1130 Discovery methods. Parties may obtain discovery by one or more of the following methods— (a) Depositions upon oral...

History of the discovery and clinical introduction of chlorpromazine.

Science.gov (United States)

López-Muñoz, Francisco; Alamo, Cecilio; Cuenca, Eduardo; Shen, Winston W; Clervoy, Patrick; Rubio, Gabriel

2005-01-01

The historical process of discovery and clinical introduction of chlorpromazine, one of the greatest advances of 20th century medicine and history of psychiatry, is analyzed. In this review, we have studied the original works of pioneers in the discovery and clinical use of chlorpromazine, as well as the contributions of prestigious researchers (historians, pharmacologists, psychiatrists, etc.) about this topic. The discovery of phenothiazines, the first family of antipsychotic agents has its origin in the development of German dye industry, at the end of the 19th century (Graebe, Liebermann, Bernthsen). Up to 1940 they were employed as antiseptics, antihelminthics and antimalarials (Ehrlich, Schulemann, Gilman). Finally, in the context of research on antihistaminic substances in France after World War II (Bovet, Halpern, Ducrot) the chlorpromazine was synthesized at Rhône-Poulenc Laboratories (Charpentier, Courvoisier, Koetschet) in December 1950. Its introduction in anaesthesiology, in the antishock area (lytic cocktails) and "artificial hibernation" techniques, is reviewed (Laborit), and its further psychiatric clinical introduction in 1952, with initial discrepancies between the Parisian Val-de-Grâce (Laborit, Hamon, Paraire) and Sainte-Anne (Delay, Deniker) hospital groups. The first North-American publications on chlorpromazine took place in 1954 (Lehmann, Winkelman, Bower). The introduction of chlorpromazine in the USA (SKF) was more difficult due to their strong psychoanalytic tradition. The consolidation of the neuroleptic therapy took place in 1955, thanks to a series of scientific events, which confirmed the antipsychotic efficacy of the chlorpromazine. The discovery of the antipsychotic properties of chlorpromazine in the 1950s was a fundamental event for the practice of psychiatry and for the genesis of the so-called "psychopharmacological revolution."

6 CFR 13.21 - Discovery.

Science.gov (United States)

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Discovery. 13.21 Section 13.21 Domestic Security DEPARTMENT OF HOMELAND SECURITY, OFFICE OF THE SECRETARY PROGRAM FRAUD CIVIL REMEDIES § 13.21 Discovery. (a) In general. (1) The following types of discovery are authorized: (i) Requests for production of...

45 CFR 99.23 - Discovery.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Discovery. 99.23 Section 99.23 Public Welfare... DEVELOPMENT FUND Hearing Procedures § 99.23 Discovery. The Department, the Lead Agency, and any individuals or groups recognized as parties shall have the right to conduct discovery (including depositions) against...

20 CFR 355.21 - Discovery.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Discovery. 355.21 Section 355.21 Employees... UNDER THE PROGRAM FRAUD CIVIL REMEDIES ACT OF 1986 § 355.21 Discovery. (a) The following types of discovery are authorized: (1) Requests for production of documents for inspection and copying; (2) Requests...

10 CFR 2.1018 - Discovery.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Discovery. 2.1018 Section 2.1018 Energy NUCLEAR REGULATORY... Geologic Repository § 2.1018 Discovery. (a)(1) Parties, potential parties, and interested governmental participants in the high-level waste licensing proceeding may obtain discovery by one or more of the following...

28 CFR 71.21 - Discovery.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Discovery. 71.21 Section 71.21 Judicial... REMEDIES ACT OF 1986 Implementation for Actions Initiated by the Department of Justice § 71.21 Discovery. (a) The following types of discovery are authorized: (1) Requests for production of documents for...

13 CFR 134.310 - Discovery.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Discovery. 134.310 Section 134.310 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION RULES OF PROCEDURE GOVERNING CASES BEFORE THE... Designations § 134.310 Discovery. Discovery will not be permitted in appeals from size determinations or NAICS...

34 CFR 33.21 - Discovery.

Science.gov (United States)

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Discovery. 33.21 Section 33.21 Education Office of the Secretary, Department of Education PROGRAM FRAUD CIVIL REMEDIES ACT § 33.21 Discovery. (a) The following types of discovery are authorized: (1) Requests for production of documents for inspection and copying...

28 CFR 18.7 - Discovery.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Discovery. 18.7 Section 18.7 Judicial Administration DEPARTMENT OF JUSTICE OFFICE OF JUSTICE PROGRAMS HEARING AND APPEAL PROCEDURES § 18.7 Discovery.... Such order may be entered upon a showing that the deposition is necessary for discovery purposes, and...

7 CFR 1.322 - Discovery.

Science.gov (United States)

2010-01-01

... 7 Agriculture 1 2010-01-01 2010-01-01 false Discovery. 1.322 Section 1.322 Agriculture Office of... Under the Program Fraud Civil Remedies Act of 1986 § 1.322 Discovery. (a) The following types of discovery are authorized: (1) Requests for production, inspection and photocopying of documents; (2...

45 CFR 1386.103 - Discovery.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Discovery. 1386.103 Section 1386.103 Public... Hearing Procedures § 1386.103 Discovery. The Department and any party named in the Notice issued pursuant to § 1386.90 has the right to conduct discovery (including depositions) against opposing parties as...

45 CFR 79.21 - Discovery.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Discovery. 79.21 Section 79.21 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION PROGRAM FRAUD CIVIL REMEDIES § 79.21 Discovery. (a) The following types of discovery are authorized: (1) Requests for production of documents for...

12 CFR 308.520 - Discovery.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Discovery. 308.520 Section 308.520 Banks and... PROCEDURE Program Fraud Civil Remedies and Procedures § 308.520 Discovery. (a) The following types of discovery are authorized: (1) Requests for production of documents for inspection and copying; (2) Requests...

47 CFR 1.729 - Discovery.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Discovery. 1.729 Section 1.729..., and Reports Involving Common Carriers Formal Complaints § 1.729 Discovery. (a) Subject to paragraph (i... seek discovery of any non-privileged matter that is relevant to the material facts in dispute in the...

7 CFR 283.12 - Discovery.

Science.gov (United States)

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false Discovery. 283.12 Section 283.12 Agriculture... of $50,000 or More § 283.12 Discovery. (a) Dispositions—(1) Motion for taking deposition. Only upon a... exist if the information sought appears reasonably calculated to lead to the discovery of admissible...

42 CFR 1005.7 - Discovery.

Science.gov (United States)

2010-10-01

... 42 Public Health 5 2010-10-01 2010-10-01 false Discovery. 1005.7 Section 1005.7 Public Health... OF EXCLUSIONS, CIVIL MONEY PENALTIES AND ASSESSMENTS § 1005.7 Discovery. (a) A party may make a... and any forms of discovery, other than those permitted under paragraph (a) of this section, are not...

29 CFR 1603.210 - Discovery.

Science.gov (United States)

2010-07-01

... 29 Labor 4 2010-07-01 2010-07-01 false Discovery. 1603.210 Section 1603.210 Labor Regulations... GOVERNMENT EMPLOYEE RIGHTS ACT OF 1991 Hearings § 1603.210 Discovery. (a) Unless otherwise ordered by the administrative law judge, discovery may begin as soon as the complaint has been transmitted to the administrative...

45 CFR 150.435 - Discovery.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Discovery. 150.435 Section 150.435 Public Welfare... AND INDIVIDUAL INSURANCE MARKETS Administrative Hearings § 150.435 Discovery. (a) The parties must identify any need for discovery from the opposing party as soon as possible, but no later than the time for...

34 CFR 81.16 - Discovery.

Science.gov (United States)

2010-07-01

... 34 Education 1 2010-07-01 2010-07-01 false Discovery. 81.16 Section 81.16 Education Office of the... Discovery. (a) The parties to a case are encouraged to exchange relevant documents and information voluntarily. (b) The ALJ, at a party's request, may order compulsory discovery described in paragraph (c) of...

29 CFR 1905.25 - Discovery.

Science.gov (United States)

2010-07-01

... 29 Labor 5 2010-07-01 2010-07-01 false Discovery. 1905.25 Section 1905.25 Labor Regulations... OCCUPATIONAL SAFETY AND HEALTH ACT OF 1970 Hearings § 1905.25 Discovery. (a) Depositions. (1) For reasons of... discovery. Whenever appropriate to a just disposition of any issue in a hearing, the presiding hearing...

12 CFR 1780.26 - Discovery.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Discovery. 1780.26 Section 1780.26 Banks and... OF PRACTICE AND PROCEDURE RULES OF PRACTICE AND PROCEDURE Prehearing Proceedings § 1780.26 Discovery. (a) Limits on discovery. Subject to the limitations set out in paragraphs (b), (d), and (e) of this...

45 CFR 160.516 - Discovery.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Discovery. 160.516 Section 160.516 Public Welfare... ADMINISTRATIVE REQUIREMENTS Procedures for Hearings § 160.516 Discovery. (a) A party may make a request to... forms of discovery, other than those permitted under paragraph (a) of this section, are not authorized...

42 CFR 430.86 - Discovery.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Discovery. 430.86 Section 430.86 Public Health... Plans and Practice to Federal Requirements § 430.86 Discovery. CMS and any party named in the notice issued under § 430.70 has the right to conduct discovery (including depositions) against opposing parties...

CRADA Final Report for CRADA Number ORNL98-0521 : Development of an Electric Bus Inverter Based on ORNL Auxiliary Resonant Tank (ART) Soft-Switching Technology; TOPICAL

International Nuclear Information System (INIS)

Ayers, C.W.

2001-01-01

The Power Electronics and Electric Machinery Research Center (PEEMRC) of Oak Ridge National Laboratory (ORNL) has for many years been developing technologies for power converters for motor drives and many other applications. Some of the research goals are to improve efficiency and reduce audible and electromagnetic interference noise generation for inverters and the driven loads. The converters are being required to produce more power with reduced weight and volume, which requires improvements in heat removal from the electronics, as well as improved circuit designs that have fewer electrical losses. PEEMRC has recently developed and patented a soft-switching inverter topology called an Auxiliary Resonant Tank (ART), and this design has been tested and proven at ORNL using a 10-kW laboratory prototype. The objective of this project was to develop, test, and install the ART inverter technology in an electric transit bus with the final goal of evaluating performance of the ORNL inverter under field conditions in a vehicle. A scaled-up inverter with the capacity to drive a 22-e bus was built based on the 10-kW ORNL laboratory prototype ART soft-switching inverter. Most (if not all) commercially available inverters for traction drive and other applications use hard-switching inverters. A Cooperative Research and Development Agreement was established with the Chattanooga Area Regional Transit Authority (CARTA), the Electric Transit Vehicle Institute (ETVI), and Advanced Vehicle Systems (AVS), all of Chattanooga, along with ORNL. CARTA, which maintains and operates the public transit system in Chattanooga, provided an area for testing the vehicle alongside other similar vehicles in the normal operating environment. ETVI offers capabilities in standardized testing and reporting and also provides exposure in the electric transit vehicle arena for ORNL's technologies. The third Chattanooga partner, (AVS) manufactures all-electric and hybrid electric transit buses using

Nuclear fission: reaction to the discovery in 1939

International Nuclear Information System (INIS)

Badash, L.; Hodes, E.; Tiddens, A.

1985-01-01

Historical aspects of the behavior of scientists in the aftermath of the discovery of nuclear fission are presented. An extensive background section is given which documents the worldwide discussion of atomic energy over the preceding four decades. A second section briefly surveys the research highlights of 1939. The third section examines the reactions of scientists, primarily in the United States, and includes coverage by newspapers, magazines and radio. The final section includes a number of themes to explain why there was little acknowledgment of the potential of the bomb to affect personal morality, the scientific community and international relations

Discovery Driven Growth

DEFF Research Database (Denmark)

Bukh, Per Nikolaj

2009-01-01

Anmeldelse af Discovery Driven Growh : A breakthrough process to reduce risk and seize opportunity, af Rita G. McGrath & Ian C. MacMillan, Boston: Harvard Business Press. Udgivelsesdato: 14 august......Anmeldelse af Discovery Driven Growh : A breakthrough process to reduce risk and seize opportunity, af Rita G. McGrath & Ian C. MacMillan, Boston: Harvard Business Press. Udgivelsesdato: 14 august...

42 CFR 405.1037 - Discovery.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Discovery. 405.1037 Section 405.1037 Public Health... Appeals Under Original Medicare (Part A and Part B) Alj Hearings § 405.1037 Discovery. (a) General rules. (1) Discovery is permissible only when CMS or its contractor elects to participate in an ALJ hearing...

20 CFR 498.207 - Discovery.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Discovery. 498.207 Section 498.207 Employees... § 498.207 Discovery. (a) For the purpose of inspection and copying, a party may make a request to...) Any form of discovery other than that permitted under paragraph (a) of this section, such as requests...

42 CFR 93.512 - Discovery.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Discovery. 93.512 Section 93.512 Public Health... Process § 93.512 Discovery. (a) Request to provide documents. A party may only request another party to...) Responses to a discovery request. Within 30 days of receiving a request for the production of documents, a...

42 CFR 3.516 - Discovery.

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false Discovery. 3.516 Section 3.516 Public Health PUBLIC... AND PATIENT SAFETY WORK PRODUCT Enforcement Program § 3.516 Discovery. (a) A party may make a request... and any forms of discovery, other than those permitted under paragraph (a) of this section, are not...

29 CFR 22.21 - Discovery.

Science.gov (United States)

2010-07-01

... 29 Labor 1 2010-07-01 2010-07-01 true Discovery. 22.21 Section 22.21 Labor Office of the Secretary of Labor PROGRAM FRAUD CIVIL REMEDIES ACT OF 1986 § 22.21 Discovery. (a) The following types of discovery are authorized: (1) Requests for production of documents for inspection and copying; (2) Requests...

Computational methods in drug discovery

Directory of Open Access Journals (Sweden)

Sumudu P. Leelananda

2016-12-01

Full Text Available The process for drug discovery and development is challenging, time consuming and expensive. Computer-aided drug discovery (CADD tools can act as a virtual shortcut, assisting in the expedition of this long process and potentially reducing the cost of research and development. Today CADD has become an effective and indispensable tool in therapeutic development. The human genome project has made available a substantial amount of sequence data that can be used in various drug discovery projects. Additionally, increasing knowledge of biological structures, as well as increasing computer power have made it possible to use computational methods effectively in various phases of the drug discovery and development pipeline. The importance of in silico tools is greater than ever before and has advanced pharmaceutical research. Here we present an overview of computational methods used in different facets of drug discovery and highlight some of the recent successes. In this review, both structure-based and ligand-based drug discovery methods are discussed. Advances in virtual high-throughput screening, protein structure prediction methods, protein–ligand docking, pharmacophore modeling and QSAR techniques are reviewed.

Resource Discovery for Extreme Scale Collaboration (RDESC) Final Report - RPI/TWC - Year 3

Energy Technology Data Exchange (ETDEWEB)

Fox, Peter [Rensselaer Polytechnic Inst., Troy, NY (United States)

2015-05-30

The amount of data produced in the practice of science is growing rapidly. Despite the accumulation and demand for scientific data, relatively little is actually made available for the broader scientific community. We surmise that the root of the problem is the perceived difficulty to electronically publish scientific data and associated metadata in a way that makes it discoverable. We propose to exploit Semantic Web technologies and practices to make (meta)data discoverable and easy to publish. We share our experiences in curating metadata to illustrate both the flexibility of our approach and the pain of discovering data in the current research environment. We also make recommendations by concrete example of how data publishers can provide their (meta)data by adding some limited, additional markup to HTML pages on the Web. With little additional effort from data publishers, the difficulty of data discovery/access/sharing can be greatly reduced and the impact of research data greatly enhanced.

Integration of Proteomics, Bioinformatics, and Systems Biology in Traumatic Brain Injury Biomarker Discovery

Science.gov (United States)

Guingab-Cagmat, J.D.; Cagmat, E.B.; Hayes, R.L.; Anagli, J.

2013-01-01

Traumatic brain injury (TBI) is a major medical crisis without any FDA-approved pharmacological therapies that have been demonstrated to improve functional outcomes. It has been argued that discovery of disease-relevant biomarkers might help to guide successful clinical trials for TBI. Major advances in mass spectrometry (MS) have revolutionized the field of proteomic biomarker discovery and facilitated the identification of several candidate markers that are being further evaluated for their efficacy as TBI biomarkers. However, several hurdles have to be overcome even during the discovery phase which is only the first step in the long process of biomarker development. The high-throughput nature of MS-based proteomic experiments generates a massive amount of mass spectral data presenting great challenges in downstream interpretation. Currently, different bioinformatics platforms are available for functional analysis and data mining of MS-generated proteomic data. These tools provide a way to convert data sets to biologically interpretable results and functional outcomes. A strategy that has promise in advancing biomarker development involves the triad of proteomics, bioinformatics, and systems biology. In this review, a brief overview of how bioinformatics and systems biology tools analyze, transform, and interpret complex MS datasets into biologically relevant results is discussed. In addition, challenges and limitations of proteomics, bioinformatics, and systems biology in TBI biomarker discovery are presented. A brief survey of researches that utilized these three overlapping disciplines in TBI biomarker discovery is also presented. Finally, examples of TBI biomarkers and their applications are discussed. PMID:23750150

10 CFR 205.198 - Discovery.

Science.gov (United States)

2010-01-01

... 10 Energy 3 2010-01-01 2010-01-01 false Discovery. 205.198 Section 205.198 Energy DEPARTMENT OF... of Proposed Disallowance, and Order of Disallowance § 205.198 Discovery. (a) If a person intends to file a Motion for Discovery, he must file it at the same time that he files his Statement of Objections...

12 CFR 908.46 - Discovery.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Discovery. 908.46 Section 908.46 Banks and... PRACTICE AND PROCEDURE IN HEARINGS ON THE RECORD Pre-Hearing Proceedings § 908.46 Discovery. (a) Limits on discovery. Subject to the limitations set out in paragraphs (b), (d), and (e) of this section, any party to...

21 CFR 17.23 - Discovery.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Discovery. 17.23 Section 17.23 Food and Drugs FOOD... HEARINGS § 17.23 Discovery. (a) No later than 60 days prior to the hearing, unless otherwise ordered by the..., depositions, and any forms of discovery, other than those permitted under paragraphs (a) and (e) of this...

Discovery Mondays: Surveyors' Tools

CERN Multimedia

2003-01-01

Surveyors of all ages, have your rulers and compasses at the ready! This sixth edition of Discovery Monday is your chance to learn about the surveyor's tools - the state of the art in measuring instruments - and see for yourself how they work. With their usual daunting precision, the members of CERN's Surveying Group have prepared some demonstrations and exercises for you to try. Find out the techniques for ensuring accelerator alignment and learn about high-tech metrology systems such as deviation indicators, tracking lasers and total stations. The surveyors will show you how they precisely measure magnet positioning, with accuracy of a few thousandths of a millimetre. You can try your hand at precision measurement using different types of sensor and a modern-day version of the Romans' bubble level, accurate to within a thousandth of a millimetre. You will learn that photogrammetry techniques can transform even a simple digital camera into a remarkable measuring instrument. Finally, you will have a chance t...

Brief history for the search and discovery of the Higgs particle - A personal perspective

CERN Document Server

Wu, Sau Lan

2014-01-01

In 1964, a new particle was proposed by several groups to answer the question of where the masses of elementary particles come from; this particle is usually referred to as the Higgs particle or the Higgs boson. In July 2012, this Higgs particle was finally found experimentally, a feat accomplished by the ATLAS Collaboration and the CMS Collaboration using the Large Hadron Collider at CERN. It is the purpose of this review to give my personal perspective on a brief history of the experimental search for this particle since the '80s and finally its discovery in 2012. Besides the early searches, those at the LEP collider at CERN, the Tevatron Collider at Fermilab, and the Large Hadron Collider at CERN are described in some detail. This experimental discovery of the Higgs boson is often considered to be the most important advance in particle physics in the last half a century, and some of the possible implications are briefly discussed. This review is partially based on a talk presented by the author at the ...

The circumstances of minor planet discovery

International Nuclear Information System (INIS)

Pilcher, F.

1989-01-01

The circumstances of discoveries of minor planets are presented in tabular form. Complete data are given for planets 2125-4044, together with notes pertaining to these planets. Information in the table includes the permanent number; the official name; for planets 330 and forward, the table includes the provisional designation attached to the discovery apparition and the year, month, the day of discovery, and the discovery place

Hundred years of X-ray discovery: a brief historical account. 1895-1995; Breve historico dos cem anos da descoberta dos raios-X: 1895-1995

Energy Technology Data Exchange (ETDEWEB)

Santin Filho, Ourides [Sao Paulo Univ., SP (Brazil). Inst. de Quimica

1995-11-01

This article gives a brief historical account of the discovery of X-rays, including early experiments of Roentgen, Barkla and Henry Bragg, followed by experiments leading to the discovery of X-ray diffraction by crystals, made by Max von Laue and Lawrence Bragg, which led to the discovery of ionic bonding in crystals. The steps in the study of X-ray spectroscopy by Moseley are also mentioned, and the correlation of his results with theories of Bohr and Rydberg, leading to the discovery of atomic number. Finally, the use of X-ray diffraction in structure determinations through Fourier transform is emphasized. (author). 35 refs., 7 figs.

Toxins and drug discovery.

Science.gov (United States)

Harvey, Alan L

2014-12-15

Components from venoms have stimulated many drug discovery projects, with some notable successes. These are briefly reviewed, from captopril to ziconotide. However, there have been many more disappointments on the road from toxin discovery to approval of a new medicine. Drug discovery and development is an inherently risky business, and the main causes of failure during development programmes are outlined in order to highlight steps that might be taken to increase the chances of success with toxin-based drug discovery. These include having a clear focus on unmet therapeutic needs, concentrating on targets that are well-validated in terms of their relevance to the disease in question, making use of phenotypic screening rather than molecular-based assays, and working with development partners with the resources required for the long and expensive development process. Copyright © 2014 The Author. Published by Elsevier Ltd.. All rights reserved.

mHealth Visual Discovery Dashboard.

Science.gov (United States)

Fang, Dezhi; Hohman, Fred; Polack, Peter; Sarker, Hillol; Kahng, Minsuk; Sharmin, Moushumi; al'Absi, Mustafa; Chau, Duen Horng

2017-09-01

We present Discovery Dashboard, a visual analytics system for exploring large volumes of time series data from mobile medical field studies. Discovery Dashboard offers interactive exploration tools and a data mining motif discovery algorithm to help researchers formulate hypotheses, discover trends and patterns, and ultimately gain a deeper understanding of their data. Discovery Dashboard emphasizes user freedom and flexibility during the data exploration process and enables researchers to do things previously challenging or impossible to do - in the web-browser and in real time. We demonstrate our system visualizing data from a mobile sensor study conducted at the University of Minnesota that included 52 participants who were trying to quit smoking.

DISCOVERY LEARNING APPROACH IN IMPROVING ARABIC ABILITY OF PRE-SERVICE TEACHERS IN RELIGIOUS TRAINING CENTRE OF MAKASSAR

Directory of Open Access Journals (Sweden)

Masrariah Amin

2017-04-01

Full Text Available Discovery Learning can be defined as the learning that takes place when the student is not presented with subject matter in the final form, rather he/she is required to find out the concepts by him/her self. This research aims to describe and analyze discovery learning method to strategically improve the comprehension and reasoning ability of Arabic pre-service teachers, which can motivate and enhance their creativity in order to enrich their insight about Arabic teaching as well, especially those who are in training centre. This research was undertaken in two classes of Makassar Religious Training Centre during June-August 2016. The design of this research is experiment with discovery learning approach with randomized pretest-posttest control group design. It was done randomly when to choosing the participants to be experiment and control group. Based on hypothesis testing, discovery learning has positive effects on the pre-service teachers’ Arabic ability in training centre to understand and analyze Arabic. Therefore, based on two-variance analysis; control and experiment group, there is difference on teachers’ comprehension and reasoning ability in learning Arabic between experiment and control group by using discovery learning and conventional method.

Discovery of the Higgs Boson Decaying to Two Photons

CERN Document Server

AUTHOR|(CDS)2075371; Branson, James; Pieri, Marco

2014-09-10

The Standard Model (SM) of particle physics fundamentally relies on the existence of the Higgs boson. This massive particle is a relic of the underlying and hidden Higgs field, whose transformation into the Higgs boson provides mass to weak bosons and all massive fermions in the SM. This particle has been long-sought and finally using data from proton-proton collisions at the LHC, CMS and ATLAS experiments have discovered a particle which is compatible with the SM Higgs boson. Presented here is the development of one of the discovery channels, $\\mathrm{H}\\rightarrow\\gamma\\gamma$, and the final $\\mathrm{H}\\rightarrow\\gamma\\gamma$ analysis and results using the full luminosity of the LHC Run 1 dataset $\\sim$25 $\\mathrm{fb}^{-1}$ at 7 or 8 TeV center of mass energy. The observed (expected) significance of this di-photon excess in the final analysis is $5.7\\sigma$ ($5.2\\sigma$) with a measured signal strength of $\\sigma / \\sigma_{SM} = 1.14^{+0.26}_{-0.23}$. The mass of this Higgs boson is not predicted by t...

Fragment-based approaches to the discovery of kinase inhibitors.

Science.gov (United States)

Mortenson, Paul N; Berdini, Valerio; O'Reilly, Marc

2014-01-01

Protein kinases are one of the most important families of drug targets, and aberrant kinase activity has been linked to a large number of disease areas. Although eminently targetable using small molecules, kinases present a number of challenges as drug targets, not least obtaining selectivity across such a large and relatively closely related target family. Fragment-based drug discovery involves screening simple, low-molecular weight compounds to generate initial hits against a target. These hits are then optimized to more potent compounds via medicinal chemistry, usually facilitated by structural biology. Here, we will present a number of recent examples of fragment-based approaches to the discovery of kinase inhibitors, detailing the construction of fragment-screening libraries, the identification and validation of fragment hits, and their optimization into potent and selective lead compounds. The advantages of fragment-based methodologies will be discussed, along with some of the challenges associated with using this route. Finally, we will present a number of key lessons derived both from our own experience running fragment screens against kinases and from a large number of published studies.

Service discovery at home

NARCIS (Netherlands)

Sundramoorthy, V.; Scholten, Johan; Jansen, P.G.; Hartel, Pieter H.

2003-01-01

Service discovery is a fairly new field that kicked off since the advent of ubiquitous computing and has been found essential in the making of intelligent networks by implementing automated discovery and remote control between devices. This paper provides an overview and comparison of several

The Greatest Mathematical Discovery?

Energy Technology Data Exchange (ETDEWEB)

Bailey, David H.; Borwein, Jonathan M.

2010-05-12

What mathematical discovery more than 1500 years ago: (1) Is one of the greatest, if not the greatest, single discovery in the field of mathematics? (2) Involved three subtle ideas that eluded the greatest minds of antiquity, even geniuses such as Archimedes? (3) Was fiercely resisted in Europe for hundreds of years after its discovery? (4) Even today, in historical treatments of mathematics, is often dismissed with scant mention, or else is ascribed to the wrong source? Answer: Our modern system of positional decimal notation with zero, together with the basic arithmetic computational schemes, which were discovered in India about 500 CE.

Open Drug Discovery Toolkit (ODDT): a new open-source player in the drug discovery field.

Science.gov (United States)

Wójcikowski, Maciej; Zielenkiewicz, Piotr; Siedlecki, Pawel

2015-01-01

There has been huge progress in the open cheminformatics field in both methods and software development. Unfortunately, there has been little effort to unite those methods and software into one package. We here describe the Open Drug Discovery Toolkit (ODDT), which aims to fulfill the need for comprehensive and open source drug discovery software. The Open Drug Discovery Toolkit was developed as a free and open source tool for both computer aided drug discovery (CADD) developers and researchers. ODDT reimplements many state-of-the-art methods, such as machine learning scoring functions (RF-Score and NNScore) and wraps other external software to ease the process of developing CADD pipelines. ODDT is an out-of-the-box solution designed to be easily customizable and extensible. Therefore, users are strongly encouraged to extend it and develop new methods. We here present three use cases for ODDT in common tasks in computer-aided drug discovery. Open Drug Discovery Toolkit is released on a permissive 3-clause BSD license for both academic and industrial use. ODDT's source code, additional examples and documentation are available on GitHub (https://github.com/oddt/oddt).

Oil in the FFTF secondary loop cover gas piping. Final unusual occurrence report

International Nuclear Information System (INIS)

Kuechle, J.D.

1981-01-01

The final unusual occurrence report describes the discovery of oil in the FFTF secondary sodium system cover gas piping. A thorough evaluation has been performed and corrective actions have been implemented to prevent a recurrence of this event

The in silico drug discovery toolbox: applications in lead discovery and optimization.

Science.gov (United States)

Bruno, Agostino; Costantino, Gabriele; Sartori, Luca; Radi, Marco

2017-11-06

Discovery and development of a new drug is a long lasting and expensive journey that takes around 15 years from starting idea to approval and marketing of new medication. Despite the R&D expenditures have been constantly increasing in the last few years, number of new drugs introduced into market has been steadily declining. This is mainly due to preclinical and clinical safety issues, which still represent about 40% of drug discontinuation. From this point of view, it is clear that if we want to increase drug-discovery success rate and reduce costs associated with development of a new drug, a comprehensive evaluation/prediction of potential safety issues should be conducted as soon as possible during early drug discovery phase. In the present review, we will analyse the early steps of drug-discovery pipeline, describing the sequence of steps from disease selection to lead optimization and focusing on the most common in silico tools used to assess attrition risks and build a mitigation plan. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Academic Drug Discovery Centres

DEFF Research Database (Denmark)

Kirkegaard, Henriette Schultz; Valentin, Finn

2014-01-01

Academic drug discovery centres (ADDCs) are seen as one of the solutions to fill the innovation gap in early drug discovery, which has proven challenging for previous organisational models. Prior studies of ADDCs have identified the need to analyse them from the angle of their economic...

Service Discovery At Home

NARCIS (Netherlands)

Sundramoorthy, V.; Scholten, Johan; Jansen, P.G.; Hartel, Pieter H.

Service discovery is a fady new field that kicked off since the advent of ubiquitous computing and has been found essential in the making of intelligent networks by implementing automated discovery and remote control between deviies. This paper provides an ovewiew and comparison of several prominent

Synthetic biology of antimicrobial discovery.

Science.gov (United States)

Zakeri, Bijan; Lu, Timothy K

2013-07-19

Antibiotic discovery has a storied history. From the discovery of penicillin by Sir Alexander Fleming to the relentless quest for antibiotics by Selman Waksman, the stories have become like folklore used to inspire future generations of scientists. However, recent discovery pipelines have run dry at a time when multidrug-resistant pathogens are on the rise. Nature has proven to be a valuable reservoir of antimicrobial agents, which are primarily produced by modularized biochemical pathways. Such modularization is well suited to remodeling by an interdisciplinary approach that spans science and engineering. Herein, we discuss the biological engineering of small molecules, peptides, and non-traditional antimicrobials and provide an overview of the growing applicability of synthetic biology to antimicrobials discovery.

How You Can Partner with NIH | NCI Technology Transfer Center | TTC

Science.gov (United States)

NCI Technology Transfer Center (TTC) provides an array of agreements to support the National Cancer Institute's partnering. Deciding which type of agreement to use can be a challenge: CRADA, MTA, collaboration, agreement, CTA, Materials-CRADA

The discovery of radioactivity: the centenary

International Nuclear Information System (INIS)

Patil, S.K.

1995-01-01

In the last decade of the nineteenth century, a number of fundamental discoveries of outstanding importance were made unexpectedly which marked the beginning of a new era in physics. A cascade of spectacular discoveries began with the announcement of the discovery of x-rays by Roentgen followed by the discoveries, in quick succession, of radioactivity by Becquerel, of Zeeman effect, of electron by J.J. Thomson, and of polonium and radium by the Curies. Both x-rays and radioactivity have wide applications in scientific, medical and industrial fields and have made outstanding contribution to the advancement of human knowledge and welfare. Radioactivity is well known and no other discovery in the field of physics or chemistry has had a more profound effect on our fundamental knowledge of nature. Present article, on the occasion of the centenary of the discovery of radioactivity, makes an attempt to describe some glimpses of the history of radioactivity. (author). 59 refs

The π discovery

International Nuclear Information System (INIS)

Fowler, P.H.

1988-01-01

The paper traces the discovery of the Π meson. The discovery was made by exposure of nuclear emulsions to cosmic radiation at high altitudes, with subsequent scanning of the emulsions for meson tracks. Disintegration of nuclei by a negative meson, and the decay of a Π meson were both observed. Further measurements revealed the mass of the meson. The studies carried out on the origin of the Π-mesons, and their mode of decay, are both described. (U.K.)

Prospects for early discoveries at the LHC with dileptons, jets and no missing energy

International Nuclear Information System (INIS)

Ciaccio, A. di; Thompson, E.

2009-01-01

Final states with high p T leptons and jets, without missing energy, are predicted by several BSM models at the LHC, including LR symmetric models and Leptoquarks. The prospects for an early discovery of particles predicted by these models, using the ATLAS experiment, are discussed. These particles include in particular first and second generation leptoquarks, right-handed W and heavy neutrinos. (author)

Synthetic biology of antimicrobial discovery

Science.gov (United States)

Zakeri, Bijan; Lu, Timothy K.

2012-01-01

Antibiotic discovery has a storied history. From the discovery of penicillin by Sir Alexander Fleming to the relentless quest for antibiotics by Selman Waksman, the stories have become like folklore, used to inspire future generations of scientists. However, recent discovery pipelines have run dry at a time when multidrug resistant pathogens are on the rise. Nature has proven to be a valuable reservoir of antimicrobial agents, which are primarily produced by modularized biochemical pathways. Such modularization is well suited to remodeling by an interdisciplinary approach that spans science and engineering. Herein, we discuss the biological engineering of small molecules, peptides, and non-traditional antimicrobials and provide an overview of the growing applicability of synthetic biology to antimicrobials discovery. PMID:23654251

'The Lusiads', poem of discovery

Directory of Open Access Journals (Sweden)

Natasha Furlan Felizi

2016-07-01

Full Text Available The article proposes reading Os Lusíadas as a discovery journey. Discovery here read as aletheia or “revelation”, as proposed by Sophia de Mello Brey­ner Andresen in 1980. Using Martin Heidegger’s notion of aletheia in the book Parmenides along with Jorge de Sena and Sophia de Mello Breyner Andresen reflections on Camões, I’ll seek to point out alternative readings for Os Lusíadas as a “discovery journey”.

Computational methods in drug discovery

OpenAIRE

Sumudu P. Leelananda; Steffen Lindert

2016-01-01

The process for drug discovery and development is challenging, time consuming and expensive. Computer-aided drug discovery (CADD) tools can act as a virtual shortcut, assisting in the expedition of this long process and potentially reducing the cost of research and development. Today CADD has become an effective and indispensable tool in therapeutic development. The human genome project has made available a substantial amount of sequence data that can be used in various drug discovery project...

Choosing Discovery: A Literature Review on the Selection and Evaluation of Discovery Layers

Science.gov (United States)

Moore, Kate B.; Greene, Courtney

2012-01-01

Within the next few years, traditional online public access catalogs will be replaced by more robust and interconnected discovery layers that can serve as primary public interfaces to simultaneously search many separate collections of resources. Librarians have envisioned this type of discovery tool since the 1980s, and research shows that…

Investigations into Library Web-Scale Discovery Services

Directory of Open Access Journals (Sweden)

Jason Vaughan

2008-03-01

Full Text Available Web-scale discovery services for libraries provide deep discovery to a library’s local and licensed content, and represent an evolution, perhaps a revolution, for end user information discovery as pertains to library collections.  This article frames the topic of web-scale discovery, and begins by illuminating web-scale discovery from an academic library’s perspective – that is, the internal perspective seeking widespread staff participation in the discovery conversation.  This included the creation of a discovery task force, a group which educated library staff, conducted internal staff surveys, and gathered observations from early adopters.  The article next addresses the substantial research conducted with library vendors which have developed these services.  Such work included drafting of multiple comprehensive question lists distributed to the vendors, onsite vendor visits, and continual tracking of service enhancements.  Together, feedback gained from library staff, insights arrived at by the Discovery Task Force, and information gathered from vendors collectively informed the recommendation of a service for the UNLV Libraries.

The Europa Ocean Discovery mission

Energy Technology Data Exchange (ETDEWEB)

Edwards, B.C. [Los Alamos National Lab., NM (United States); Chyba, C.F. [Univ. of Arizona, Tucson, AZ (United States); Abshire, J.B. [National Aeronautics and Space Administration, Greenbelt, MD (United States). Goddard Space Flight Center] [and others

1997-06-01

Since it was first proposed that tidal heating of Europa by Jupiter might lead to liquid water oceans below Europa`s ice cover, there has been speculation over the possible exobiological implications of such an ocean. Liquid water is the essential ingredient for life as it is known, and the existence of a second water ocean in the Solar System would be of paramount importance for seeking the origin and existence of life beyond Earth. The authors present here a Discovery-class mission concept (Europa Ocean Discovery) to determine the existence of a liquid water ocean on Europa and to characterize Europa`s surface structure. The technical goal of the Europa Ocean Discovery mission is to study Europa with an orbiting spacecraft. This goal is challenging but entirely feasible within the Discovery envelope. There are four key challenges: entering Europan orbit, generating power, surviving long enough in the radiation environment to return valuable science, and complete the mission within the Discovery program`s launch vehicle and budget constraints. The authors will present here a viable mission that meets these challenges.

29 CFR 18.13 - Discovery methods.

Science.gov (United States)

2010-07-01

... 29 Labor 1 2010-07-01 2010-07-01 true Discovery methods. 18.13 Section 18.13 Labor Office of the... ADMINISTRATIVE LAW JUDGES General § 18.13 Discovery methods. Parties may obtain discovery by one or more of the following methods: Depositions upon oral examination or written questions; written interrogatories...

Discovery of the neutron (to the fiftieth anniversary of neutron discovery)

International Nuclear Information System (INIS)

Pasechnik, M.V.

1984-01-01

Development of neutron physics in the USSR for the recent 50 years from the moment of neutron discovery is considered. History of neutron discovery is presented in brief. Neutron properties and fundamental problems of physics: electric dipole neutron moment, neutron β-decay, neutron interaction with nuclei and potential of nucleon interaction not conserving spatial parity are discussed. Main aspects of neutron physics application in power engineering, nuclear technology and other branches of science and technique are set forth

Clinical Trials Reference Materials and Related Links | Division of Cancer Prevention

Science.gov (United States)

Agreements Clinical Trials Agreement Confidential Disclosure Agreements Cooperative Research and Development Agreement (CRADA) - Research Plan Financial and Staffing Contribution of the Parties Exception or Modifications to the CRADA Human Subject Protection/Informed Consent Tutorials (or Education) |

Final Report: Performance Engineering Research Institute

Energy Technology Data Exchange (ETDEWEB)

Mellor-Crummey, John [Rice Univ., Houston, TX (United States)

2014-10-27

This document is a final report about the work performed for cooperative agreement DE-FC02-06ER25764, the Rice University effort of Performance Engineering Research Institute (PERI). PERI was an Enabling Technologies Institute of the Scientific Discovery through Advanced Computing (SciDAC-2) program supported by the Department of Energy's Office of Science Advanced Scientific Computing Research (ASCR) program. The PERI effort at Rice University focused on (1) research and development of tools for measurement and analysis of application program performance, and (2) engagement with SciDAC-2 application teams.

41 CFR 60-30.33 - Discovery.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true Discovery. 60-30.33... 11246 Expedited Hearing Procedures § 60-30.33 Discovery. (a) Any party may serve requests for admissions... with § 60-30.8, the Administrative Law Judge may allow the taking of depositions. Other discovery will...

Variable importance analysis based on rank aggregation with applications in metabolomics for biomarker discovery.

Science.gov (United States)

Yun, Yong-Huan; Deng, Bai-Chuan; Cao, Dong-Sheng; Wang, Wei-Ting; Liang, Yi-Zeng

2016-03-10

Biomarker discovery is one important goal in metabolomics, which is typically modeled as selecting the most discriminating metabolites for classification and often referred to as variable importance analysis or variable selection. Until now, a number of variable importance analysis methods to discover biomarkers in the metabolomics studies have been proposed. However, different methods are mostly likely to generate different variable ranking results due to their different principles. Each method generates a variable ranking list just as an expert presents an opinion. The problem of inconsistency between different variable ranking methods is often ignored. To address this problem, a simple and ideal solution is that every ranking should be taken into account. In this study, a strategy, called rank aggregation, was employed. It is an indispensable tool for merging individual ranking lists into a single "super"-list reflective of the overall preference or importance within the population. This "super"-list is regarded as the final ranking for biomarker discovery. Finally, it was used for biomarkers discovery and selecting the best variable subset with the highest predictive classification accuracy. Nine methods were used, including three univariate filtering and six multivariate methods. When applied to two metabolic datasets (Childhood overweight dataset and Tubulointerstitial lesions dataset), the results show that the performance of rank aggregation has improved greatly with higher prediction accuracy compared with using all variables. Moreover, it is also better than penalized method, least absolute shrinkage and selectionator operator (LASSO), with higher prediction accuracy or less number of selected variables which are more interpretable. Copyright © 2016 Elsevier B.V. All rights reserved.

Representation Discovery using Harmonic Analysis

CERN Document Server

Mahadevan, Sridhar

2008-01-01

Representations are at the heart of artificial intelligence (AI). This book is devoted to the problem of representation discovery: how can an intelligent system construct representations from its experience? Representation discovery re-parameterizes the state space - prior to the application of information retrieval, machine learning, or optimization techniques - facilitating later inference processes by constructing new task-specific bases adapted to the state space geometry. This book presents a general approach to representation discovery using the framework of harmonic analysis, in particu

Antibody informatics for drug discovery

DEFF Research Database (Denmark)

Shirai, Hiroki; Prades, Catherine; Vita, Randi

2014-01-01

to the antibody science in every project in antibody drug discovery. Recent experimental technologies allow for the rapid generation of large-scale data on antibody sequences, affinity, potency, structures, and biological functions; this should accelerate drug discovery research. Therefore, a robust bioinformatic...... infrastructure for these large data sets has become necessary. In this article, we first identify and discuss the typical obstacles faced during the antibody drug discovery process. We then summarize the current status of three sub-fields of antibody informatics as follows: (i) recent progress in technologies...... for antibody rational design using computational approaches to affinity and stability improvement, as well as ab-initio and homology-based antibody modeling; (ii) resources for antibody sequences, structures, and immune epitopes and open drug discovery resources for development of antibody drugs; and (iii...

45 CFR 213.23a - Discovery.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 2 2010-10-01 2010-10-01 false Discovery. 213.23a Section 213.23a Public Welfare... Discovery. The Department and any party named in the notice issued pursuant to § 213.11 shall have the right to conduct discovery (including depositions) against opposing parties. Rules 26-37 of the Federal...

Cassini at Saturn: The Final Two Years

Science.gov (United States)

Spilker, L.; Edgington, S.; Altobelli, N.

2015-10-01

After 11 years in orbit, the Cassini-Huygens Mission to Saturn, a collaboration of NASA, ESA, and ASI, continues to wow the imagination and reveal unprecedented findings. Every year Cassini produces answers to questions raised by the Voyager flybys, while at the same time posing new questions that can only be answered with a long duration mission using a flagship-class spacecraft. Here we sample a few of Cassini's discoveries from the past year and give an overview of Cassini's final two years.

Research on Hotspot Discovery in Internet Public Opinions Based on Improved -Means

Directory of Open Access Journals (Sweden)

Gensheng Wang

2013-01-01

Full Text Available How to discover hotspot in the Internet public opinions effectively is a hot research field for the researchers related which plays a key role for governments and corporations to find useful information from mass data in the Internet. An improved -means algorithm for hotspot discovery in internet public opinions is presented based on the analysis of existing defects and calculation principle of original -means algorithm. First, some new methods are designed to preprocess website texts, select and express the characteristics of website texts, and define the similarity between two website texts, respectively. Second, clustering principle and the method of initial classification centers selection are analyzed and improved in order to overcome the limitations of original -means algorithm. Finally, the experimental results verify that the improved algorithm can improve the clustering stability and classification accuracy of hotspot discovery in internet public opinions when used in practice.

Optimizing Oral Bioavailability in Drug Discovery: An Overview of Design and Testing Strategies and Formulation Options.

Science.gov (United States)

Aungst, Bruce J

2017-04-01

For discovery teams working toward new, orally administered therapeutic agents, one requirement is to attain adequate systemic exposure after oral dosing, which is best accomplished when oral bioavailability is optimized. This report summarizes the bioavailability challenges currently faced in drug discovery, and the design and testing methods and strategies currently utilized to address the challenges. Profiling of discovery compounds usually includes separate assessments of solubility, permeability, and susceptibility to first-pass metabolism, which are the 3 most likely contributors to incomplete oral bioavailability. An initial assessment of absorption potential may be made computationally, and high throughput in vitro assays are typically performed to prioritize compounds for in vivo studies. The initial pharmacokinetic study is a critical decision point in compound evaluation, and the importance of the effect the dosing vehicle or formulation can have on oral bioavailability, especially for poorly water soluble compounds, is emphasized. Dosing vehicles and bioavailability-enabling formulations that can be used for discovery and preclinical studies are described. Optimizing oral bioavailability within a chemical series or for a lead compound requires identification of the barrier limiting bioavailability, and methods used for this purpose are outlined. Finally, a few key guidelines are offered for consideration when facing the challenges of optimizing oral bioavailability in drug discovery. Copyright © 2017 American Pharmacists Association®. Published by Elsevier Inc. All rights reserved.

Low-Data Investigation of Higgs Boson Discovery at the LHC

CERN Document Server

Scoby, Cheyne M

2006-01-01

The Standard Model (SM) remains as a complete and effective tool for understanding fundamental particles and their interactions. There is only one particle that the model predicts that has not yet been discovered. The Higgs boson is required as part of the mechanism behind electroweak symmetry breaking, and explains how the weak vector bosons, as well as the charged quarks and leptons gain mass, proportional to their coupling to the Higgs field. The SM predicts many properties of the Higgs, but cannot give a precise value to its mass. Experiment and theoretical arguments have put limits on the Higgs mass to within 114.7 GeV/c2 < MH < 1000 GeV/c2. The Large Hadron Collider at CERN will provide access to a new energy regime that will offer many channels for a potential discovery of the Higgs. In the Compact Muon Solenoid (CMS) detector experiment, the “Golden mode” for Higgs discovery features decay to two Z0, with both Z0 decaying to leptonic final states. Full reconstruction analyses suffer from the...

Reflections on the discovery of fission

International Nuclear Information System (INIS)

Peieris, Rudolf

1989-01-01

In this article an eminent scientist looks back on the fifty years since the discovery of nuclear fission. Starting with Enrico Fermi's work with neutrons in the 1930s, the author then introduces Neils Bohr's ideas about atomic structure. The puzzle of what happens when uranium was bombarded by neutrons was gradually unravelled. Finally by 1939 it was becoming realised that the uranium nucleus had split in two. Gradually physicists began to speculate on the possibility of harnessing some of the energy stored in the nucleus and on the idea of a chain reaction. As the end of the decade approached, workers in the field combined with military forces to develop a weapon based on this reaction, the Manhatton Project. The author notes how fast an obscure, esoteric piece of physics research, can be taken up into the military and political area. (UK)

Mosaic Transparent Armor System Final Report CRADA No. TC02162.0

Energy Technology Data Exchange (ETDEWEB)

Kuntz, J. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Breslin, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-08-29

This was a collaborative effort between Lawrence Livermore National Security, LLC as manager and operator of Lawrence Livermore National Laboratory (LLNL) and The Protective Group, Inc. (TPG) to improve the performance of the mosaic transparent armor system (MTAS) for transparent armor applications, military and civilian. LLNL was to provide the unique MTAS technology and designs to TPG for innovative construction and ballistic testing of improvements needed for current and near future application of the armor windows on vehicles and aircraft. The goal of the project was to advance the technology of MTAS to the point that these mosaic transparent windows would be introduced and commercially manufactured for military vehicles and aircraft.

Optimization of electron-cyclotron-resonance charge-breeder ions : Final CRADA Report

International Nuclear Information System (INIS)

Pardo, R.

2009-01-01

Measurements of 1+ beam properties and associated performance of ECR Charge Breeder source determined by total efficiency measurement and charge state distributions from the ECR Charge Breeder. These results were communicated to Far-Tech personnel who used them to benchmark the newly developed programs that model ion capture and charge breeding in the ECR Charge Breeder Source. Providing the basic data described above and in the discussion below to Far-Tech allowed them to improve and refine their calculational tools for ECR ion sources. These new tools will be offered for sale to industry and will also provide important guidance to other research labs developing Charge Breeding ion sources for radioactive beam physics research.

Carbon-carbon composites for orthopedic prosthesis and implants. CRADA final report

Energy Technology Data Exchange (ETDEWEB)

Burchell, T D; Klett, J W; Strizak, J P [Oak Ridge National Lab., TN (United States); Baker, C [FMI, Biddeford, ME (United States)

1998-01-21

The prosthetic implant market is extensive. For example, because of arthritic degeneration of hip and knee cartilage and osteoporotic fractures of the hip, over 200,000 total joint replacements (TJRs) are performed in the United States each year. Current TJR devices are typically metallic (stainless steel, cobalt, or titanium alloy) and are fixed in the bone with polymethylacrylate (PMMA) cement. Carbon-carbon composite materials offer several distinct advantages over metals for TJR prosthesis. Their mechanical properties can be tailored to match more closely the mechanical properties of human bone, and the composite may have up to 25% porosity, the size and distribution of which may be controlled through processing. The porous nature of carbon-carbon composites will allow for the ingrowth of bone, achieving biological fixation, and eliminating the need for PMMA cement fixation.

Breast Cancer Diagnostic System Final Report CRADA No. TC02098.0

Energy Technology Data Exchange (ETDEWEB)

Rubenchik, A. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); DaSilva, L. B. [BioTelligent, Inc., Livermore, CA (United States)

2017-09-06

This was a collaborative effort between Lawrence Livermore National Security, LLC (formerly The Regents of the University of California)/Lawrence Liver more National Laboratory (LLNL) and BioTelligent, Inc. together with a Russian Institution (BioFil, Ltd.), to develop a new system ( diagnostic device, operating procedures, algorithms and software) to accurately distinguish between benign and malignant breast tissue (Breast Cancer Diagnostic System, BCDS).

Rapidly Deployable Security System Final Report CRADA No. TC-2030-01

Energy Technology Data Exchange (ETDEWEB)

Kohlhepp, V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Whiteman, B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McKibben, M. T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-09-28

The ultimate objective of the LEADER and LLNL strategic partnership was to develop and commercialize_a security-based system product and platform for the use in protecting the substantial physical and economic assets of the government and commerce of the United States. The primary goal of this project was to integrate video surveillance hardware developed by LLNL with a security software backbone developed by LEADER. Upon completion of the project, a prototype hardware/software security system that is highly scalable was to be demonstrated.

Letter to Eduard Smetanin, dated March 2, 2007: Final CRADA report

International Nuclear Information System (INIS)

Ehst, D.A.

2007-01-01

The IPP/DOE program office has finished its evaluation of the alpha-emitting isotope work with Kurchatov Institute and IPPE, and they have made an important decision about the future of this work. IPP/DOE has directed us to re-program the work and add more funds, so the emphasis will be on production of Th228. By making this re-direction of the isotope work, IPPE will see several important benefits: (a) the payments will be made faster to IPPE by using the ISTC Agreement; (b) a larger amount of money will be paid to IPPE; and (c) a profitable future business opportunity for IPPE is more probable.

ALPHA SMP SYSTEM(S) Final Report CRADA No. TC-1404-97

Energy Technology Data Exchange (ETDEWEB)

Seager, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Beaudet, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-16

Within the scope of this subcontract, Digital Equipment Corporation (DIGITAL) and the University, through the Lawrence Livermore National Laboratory (LLNL), engaged in joint research and development activities of mutual interest and benefit. The primary objectives of these activities were, for LLNL to improve its capability to perform its mission, and for DIGITAL to develop technical capability complimentary to this mission. The collaborative activities had direct manpower investments by DIGITAL and LLNL. The project was divided into four areas of concern, which were handled concurrently. These areas included Gang Scheduling, Numerical Methods, Applications Development and Code Development Tools.

Development of Rotational Accelerometers Final Report CRADA No. TSB-2008-99

Energy Technology Data Exchange (ETDEWEB)

Hunter, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Crosson, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-16

One of the difficulties in fabricating an inexpensive angular rate or rotation sensor is producing a device that is insensitive to acceleration, including the constant acceleration of gravity. The majority of rate sensors are either tuning fork type devices sensing a relatively weak force (i.e., Coriolis effect) and thus not very sensitive, or gyroscopes (either rotating or fiber optic based) that are large, consume lots of power and are expensive. This project was a collaborative effort between LLNL and The Fredericks Company to develop a rotational sensor as a standardized, commercial product. The Fredericks Company possessed expertise and capabilities in the technical aspects of manufacturing this type of sensor, and they were interested in collaborating with LLNL to manufacture the rotational rate sensors as a commercial product.

Automotive Airbag Safety Enhancement Final Report CRADA No. TSB-1165-95

Energy Technology Data Exchange (ETDEWEB)

Cutting, Jack [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Durrell, Robert [Quantic Industries, Inc., San Carlos, CA (United States)

2017-11-09

The Vehicle Safety systems (VSS) Division of Quantic Industries, Inc. (QII) manufactured automotive airbag components. When both the driver and the passenger side airbags inflated in a tightly sealed passenger compartment, the compression of the surrounding air could and, in some instances, would cause damage to the eardrums of the occupants. The Aerospace and Division (ADD) of QII had partially developed the technology to fracture the canopy of a jet aircraft at the time of pilot ejection. The technical problem was how to adapt the canopy fracturing technology to the rear window of a motor vehicle in a safe and cost effective manner. The existing approach was to replace the embedded rear window defroster with a series-parallel network of exploding bridge wires (EBWs). This would still provide the defrost function at low voltage/ current, but would cause fracturing of the window when a high current/voltage pulse was applied without pyrotechnics or explosives. The elements of this system were the embedded EBW network and a trunk-mounted fireset. The fireset would store the required energy to fire the network upon the receipt of a trigger signal from the existing air bag crash sensor.

Laser Drilling Development Trial Final Report CRADA No. TSB-1538-98

Energy Technology Data Exchange (ETDEWEB)

Hermann, M. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hebbar, R. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-11-01

This project performed various laser drilling tests to demonstrate femtosecond laser drilling of fuel injector nozzles with minimal recast, minimal heat affected zone and no collateral damage. LLNL had extensive experience in ultra short-pulse laser systems and developed specialized hardware for these applications.

Bipolar plate materials in molten carbonate fuel cells. Final CRADA report.

Energy Technology Data Exchange (ETDEWEB)

Krumpelt, M.

2004-06-01

Advantages of implementation of power plants based on electrochemical reactions are successfully demonstrated in the USA and Japan. One of the msot promising types of fuel cells (FC) is a type of high temperature fuel cells. At present, thanks to the efforts of the leading countries that develop fuel cell technologies power plants on the basis of molten carbonate fuel cells (MCFC) and solid oxide fuel cells (SOFC) are really close to commercialization. One of the problems that are to be solved for practical implementation of MCFC and SOFC is a problem of corrosion of metal components of stacks that are assembled of a number of fuel cells. One of the major components of MCFC and SOFC stacks is a bipolar separator plate (BSP) that performs several functions - it is separation of reactant gas flows sealing of the joints between fuel cells, and current collection from the surface of electrodes. The goal of Task 1 of the project is to develop new cost-effective nickel coatings for the Russian 20X23H18 steel for an MCFC bipolar separator plate using technological processes usually implemented to apply corrosion stable coatings onto the metal parts for products in the defense. There was planned the research on production of nickel coatings using different methods, first of all the galvanic one and the explosion cladding one. As a result of the works, 0.4 x 712 x 1296 mm plates coated with nickel on one side were to be made and passed to ANL. A line of 4 galvanic baths 600 liters was to be built for the galvanic coating applications. The goal of Task 2 of the project is the development of a new material of an MCFC bipolar separator plate with an upgraded corrosion stability, and development of a technology to produce cold roll sheets of this material the sizes of which will be 0.8 x 712x 1296 mm. As a result of these works, a pilot batch of the rolled material in sheets 0.8 x 712 x 1296 mm in size is to be made (in accordance with the norms and standards of the Russian metallurgical industry) and supplied to the partner for tests in a stack of fuel cells. A feasibility study on the cost of the Russian material for a BSP is to be done on Tasks 1, 2 in case the annual order makes up 400,000 sheets. The goal of Task 3 of the project is to research on possible implementation of cermet compositions on the basis of LiAlO{sub 2}, TiN, B{sub 4}C, ceramics with Ni and Ni-Mo binders. BaCeO{sub 3} conductive ceramics with metal binders of Ni, Ni-Cr etc. were also planned to be studied. As a result of these works, a pilot batch of samples is to be made and passed to FCE for tests. The goal of Task 4 of the Project is development of a new alloy or alloys with a ceramic coating that will have upgraded corrosion stability in operation within a SOFC. A new alloy was to be worked out by the way of modification of compositions of industrial alloys. Ceramic coatings are to be applied onto ferrite steel produced serially by iron and steel industry of Russia as sheet iron.

New Aqueous Binders for Lithium-ion Batteries

Energy Technology Data Exchange (ETDEWEB)

Jansen, Andrew N. [Argonne National Lab. (ANL), Argonne, IL (United States). Chemical Sciences and Engineering Division; Krumdick, Gregory K. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Trask, Stephen E. [Argonne National Lab. (ANL), Argonne, IL (United States). Chemical Sciences and Engineering Division; Polzin, Bryant J. [Argonne National Lab. (ANL), Argonne, IL (United States). Chemical Sciences and Engineering Division; Lu, Wenquan [Argonne National Lab. (ANL), Argonne, IL (United States). Chemical Sciences and Engineering Division; Kahvecioglu Feridun, Ozge [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Hellring, Stuart D. [PPG Industries, Inc., Allison Park, PA (United States); Stewart, Matthew [PPG Industries, Inc., Allison Park, PA (United States); Kornish, Brian [PPG Industries, Inc., Allison Park, PA (United States)

2016-12-22

This final report summarizes the research effort of the CRADA between PPG Industries and Argonne National Laboratory (CRADA # C1400501 and Amendment 1 - ACK 85C11, Rev. 1), and completes the requirements of Task #5 in the CRADA. The results from Argonne represent a combined effort between the MERF and CAMP Facility (Materials Engineering Research Facility and the Cell Analysis, Modeling and Prototyping Facility). The key points of this report can be briefly summarized as: The multicomponent aqueous binder for NCM cathodes developed by PPG shows promising results when used on the CAMP Facility’s pilot-scale coater; NCM523 cathode electrodes exposed to water exhibit a voltage anomaly in the first two formation cycles that appears to have little effect on the material capacity, but needs to be explored further; the experimental LFP electrode produced by PPG does cycle electrochemically, but with reduced capacity and an uncharacteristic voltage profile; there is no obvious correlation between the pH and zeta-potential of materials that are commonly used in the lithium-ion battery; lithium ions are more readily dissolved out of NCM523 by water than the transition metals (by two orders of magnitude), and suggests that the plating bath may need to be spiked with a lithium salt; the approach of creating sub-micron size NCM523 particles via ball milling results in a cathode material with poor electrochemical performance.

Discovery of Uniformly Expanding Universe

Directory of Open Access Journals (Sweden)

Cahill R. T.

2012-01-01

Full Text Available Saul Perlmutter and the Brian Schmidt – Adam Riess teams reported that their Friedmann-model GR-based analysis of their supernovae magnitude-redshift data re- vealed a new phenomenon of “dark energy” which, it is claimed, forms 73% of the energy / matter density of the present-epoch universe, and which is linked to the further claim of an accelerating expansion of the universe. In 2011 Perlmutter, Schmidt and Riess received the Nobel Prize in Physics “for the discovery of the accelerating ex- pansion of the Universe through observations of distant supernovae”. Here it is shown that (i a generic model-independent analysis of this data reveals a uniformly expanding universe, (ii their analysis actually used Newtonian gravity, and finally (iii the data, as well as the CMB fluctuation data, does not require “dark energy” nor “dark matter”, but instead reveals the phenomenon of a dynamical space, which is absent from the Friedmann model.

Anticancer drug discovery and pharmaceutical chemistry: a history.

Science.gov (United States)

Braña, Miguel F; Sánchez-Migallón, Ana

2006-10-01

There are several procedures for the chemical discovery and design of new drugs from the point of view of the pharmaceutical or medicinal chemistry. They range from classical methods to the very new ones, such as molecular modeling or high throughput screening. In this review, we will consider some historical approaches based on the screening of natural products, the chances for luck, the systematic screening of new chemical entities and serendipity. Another group comprises rational design, as in the case of metabolic pathways, conformation versus configuration and, finally, a brief description on available new targets to be carried out. In each approach, the structure of some examples of clinical interest will be shown.

Evaluation of Novel Semiconductor Materials Potentially Useful in Solar Cells: Cooperative Research and Development Final Report, CRADA number CRD-06-00172

Energy Technology Data Exchange (ETDEWEB)

Geisz, J.

2010-07-01

Evaluation of novel semiconductor materials potentially useful in solar cells. NREL will fabricate, test and analyze solar cells from EpiWorks' wafers produced in 2-3 separate growth campaigns. NREL will also characterize material from 2-3 separate EpiWorks material development campaigns. Finally, NREL will visit EpiWorks and help establish any necessary process, such as spectral CV measurements and III-V on Si metalization processes and help validate solar cell designs and performance.

Discovery of massive neutral vector mesons

International Nuclear Information System (INIS)

Anon.

1976-01-01

Personal accounts of the discovery of massive neutral vector mesons (psi particles) are given by researchers S. Ting, G. Goldhaber, and B. Richter. The double-arm spectrometer and the Cherenkov effect are explained in a technical note, and the solenoidal magnetic detector is discussed in an explanatory note for nonspecialists. Reprints of three papers in Physical Review Letters which announced the discovery of the particles are given: Experimental observation of a heavy particle J, Discovery of a narrow resonance in e + e - annihilation, and Discovery of a second narrow resonance in e + e - annihilation. A discussion of subsequent developments and scientific biographies of the three authors are also presented. 25 figures

Functional principles of registry-based service discovery

NARCIS (Netherlands)

Sundramoorthy, V.; Tan, C.; Hartel, P.H.; Hartog, den J.I.; Scholten, J.

2005-01-01

As Service Discovery Protocols (SDP) are becoming increasingly important for ubiquitous computing, they must behave according to predefined principles. We present the functional Principles of Service Discovery for robust, registry-based service discovery. A methodology to guarantee adherence to

Binding thermodynamics discriminates fragments from druglike compounds: a thermodynamic description of fragment-based drug discovery.

Science.gov (United States)

Williams, Glyn; Ferenczy, György G; Ulander, Johan; Keserű, György M

2017-04-01

Small is beautiful - reducing the size and complexity of chemical starting points for drug design allows better sampling of chemical space, reveals the most energetically important interactions within protein-binding sites and can lead to improvements in the physicochemical properties of the final drug. The impact of fragment-based drug discovery (FBDD) on recent drug discovery projects and our improved knowledge of the structural and thermodynamic details of ligand binding has prompted us to explore the relationships between ligand-binding thermodynamics and FBDD. Information on binding thermodynamics can give insights into the contributions to protein-ligand interactions and could therefore be used to prioritise compounds with a high degree of specificity in forming key interactions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Materials Discovery | Materials Science | NREL

Science.gov (United States)

Discovery Materials Discovery Images of red and yellow particles NREL's research in materials characterization of sample by incoming beam and measuring outgoing particles, with data being stored and analyzed Staff Scientist Dr. Zakutayev specializes in design of novel semiconductor materials for energy

On the pulse of discovery

Science.gov (United States)

2017-12-01

What started 50 years ago as a `smudge' on paper has flourished into a fundamental field of astrophysics replete with unexpected applications and exciting discoveries. To celebrate the discovery of pulsars, we look at the past, present and future of pulsar astrophysics.

Knowledge Discovery and Data Mining in Iran's Climatic Researches

Science.gov (United States)

Karimi, Mostafa

2013-04-01

Advances in measurement technology and data collection is the database gets larger. Large databases require powerful tools for analysis data. Iterative process of acquiring knowledge from information obtained from data processing is done in various forms in all scientific fields. However, when the data volume large, and many of the problems the Traditional methods cannot respond. in the recent years, use of databases in various scientific fields, especially atmospheric databases in climatology expanded. in addition, increases in the amount of data generated by the climate models is a challenge for analysis of it for extraction of hidden pattern and knowledge. The approach to this problem has been made in recent years uses the process of knowledge discovery and data mining techniques with the use of the concepts of machine learning, artificial intelligence and expert (professional) systems is overall performance. Data manning is analytically process for manning in massive volume data. The ultimate goal of data mining is access to information and finally knowledge. climatology is a part of science that uses variety and massive volume data. Goal of the climate data manning is Achieve to information from variety and massive atmospheric and non-atmospheric data. in fact, Knowledge Discovery performs these activities in a logical and predetermined and almost automatic process. The goal of this research is study of uses knowledge Discovery and data mining technique in Iranian climate research. For Achieve This goal, study content (descriptive) analysis and classify base method and issue. The result shown that in climatic research of Iran most clustering, k-means and wards applied and in terms of issues precipitation and atmospheric circulation patterns most introduced. Although several studies in geography and climate issues with statistical techniques such as clustering and pattern extraction is done, Due to the nature of statistics and data mining, but cannot say for

Discovery radiomics via evolutionary deep radiomic sequencer discovery for pathologically proven lung cancer detection.

Science.gov (United States)

Shafiee, Mohammad Javad; Chung, Audrey G; Khalvati, Farzad; Haider, Masoom A; Wong, Alexander

2017-10-01

While lung cancer is the second most diagnosed form of cancer in men and women, a sufficiently early diagnosis can be pivotal in patient survival rates. Imaging-based, or radiomics-driven, detection methods have been developed to aid diagnosticians, but largely rely on hand-crafted features that may not fully encapsulate the differences between cancerous and healthy tissue. Recently, the concept of discovery radiomics was introduced, where custom abstract features are discovered from readily available imaging data. We propose an evolutionary deep radiomic sequencer discovery approach based on evolutionary deep intelligence. Motivated by patient privacy concerns and the idea of operational artificial intelligence, the evolutionary deep radiomic sequencer discovery approach organically evolves increasingly more efficient deep radiomic sequencers that produce significantly more compact yet similarly descriptive radiomic sequences over multiple generations. As a result, this framework improves operational efficiency and enables diagnosis to be run locally at the radiologist's computer while maintaining detection accuracy. We evaluated the evolved deep radiomic sequencer (EDRS) discovered via the proposed evolutionary deep radiomic sequencer discovery framework against state-of-the-art radiomics-driven and discovery radiomics methods using clinical lung CT data with pathologically proven diagnostic data from the LIDC-IDRI dataset. The EDRS shows improved sensitivity (93.42%), specificity (82.39%), and diagnostic accuracy (88.78%) relative to previous radiomics approaches.

Discovery of inhibitors of bacterial histidine kinases

NARCIS (Netherlands)

Velikova, N.R.

2014-01-01

Discovery of Inhibitors of Bacterial Histidine Kinases Summary

The thesis is on novel antibacterial drug discovery (http://youtu.be/NRMWOGgeysM). Using structure-based and fragment-based drug discovery approach, we have identified small-molecule histidine-kinase

High Efficiency Water Heating Technology Development Final Report. Part I, Lab/Field Performance Evaluation and Accelerated Life Testing of a Hybrid Electric Heat Pump Water Heater (HPWH)

Energy Technology Data Exchange (ETDEWEB)

Baxter, Van D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Murphy, Richard W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rice, C. Keith [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Linkous, Randall Lee [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-04-01

DOE has supported efforts for many years with the objective of getting a water heater that uses heat pump technology (aka a heat pump water heater or HPWH) successfully on the residential equipment market. The most recent previous effort (1999-2002) produced a product that performed very well in ORNL-led accelerated durability and field tests. The commercial partner for this effort, Enviromaster International (EMI), introduced the product to the market under the trade name Watter$aver in 2002 but ceased production in 2005 due to low sales. A combination of high sales price and lack of any significant infrastructure for service after the sale were the principal reasons for the failure of this effort. What was needed for market success was a commercial partner with the manufacturing and market distribution capability necessary to allow economies of scale to lead to a viable unit price together with a strong customer service infrastructure. General Electric certainly meets these requirements, and knowing of ORNL s expertise in this area, approached ORNL with the proposal to partner in a CRADA to produce a high efficiency electric water heater. A CRADA with GE was initiated early in Fiscal Year, 2008. GE initially named its product the Hybrid Electric Water Heater (HEWH).

Service discovery using Bloom filters

NARCIS (Netherlands)

Goering, P.T.H.; Heijenk, Geert; Lelieveldt, B.P.F.; Haverkort, Boudewijn R.H.M.; de Laat, C.T.A.M.; Heijnsdijk, J.W.J.

A protocol to perform service discovery in adhoc networks is introduced in this paper. Attenuated Bloom filters are used to distribute services to nodes in the neighborhood and thus enable local service discovery. The protocol has been implemented in a discrete event simulator to investigate the

Tools, techniques, organisation and culture of the CADD group at Sygnature Discovery.

Science.gov (United States)

St-Gallay, Steve A; Sambrook-Smith, Colin P

2017-03-01

Computer-aided drug design encompasses a wide variety of tools and techniques, and can be implemented with a range of organisational structures and focus in different organisations. Here we outline the computational chemistry skills within Sygnature Discovery, along with the software and hardware at our disposal, and briefly discuss the methods that are not employed and why. The goal of the group is to provide support for design and analysis in order to improve the quality of compounds synthesised and reduce the timelines of drug discovery projects, and we reveal how this is achieved at Sygnature. Impact on medicinal chemistry is vital to demonstrating the value of computational chemistry, and we discuss the approaches taken to influence the list of compounds for synthesis, and how we recognise success. Finally we touch on some of the areas being developed within the team in order to provide further value to the projects and clients.

Using concepts in literature-based discovery : Simulating Swanson's Raynaud-fish oil and migraine-magnesium discoveries

NARCIS (Netherlands)

Weeber, M; Klein, Henny; de Jong-van den Berg, LTW; Vos, R

Literature-based discovery has resulted in new knowledge. In the biomedical context, Don R. Swanson has generated several literature-based hypotheses that have been corroborated experimentally and clinically. In this paper, we propose a two-step model of the discovery process in which hypotheses are

78 FR 12832 - Request for Information: Public-Private Collaborations in Pain Research

Science.gov (United States)

2013-02-25

..., your name and title, and contact information (including mailing address, email address, and phone... the collaborating party a license or an assignment to inventions made under the CRADA. VA will select... those products embodying inventions made under the CRADA will be manufactured substantially in the...

12 CFR 747.24 - Scope of document discovery.

Science.gov (United States)

2010-01-01

... act of Congress, or the principles of common law provide. (d) Time limits. All discovery, including... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Scope of document discovery. 747.24 Section 747... of Practice and Procedure § 747.24 Scope of document discovery. (a) Limits on discovery. (1) Subject...

Resource Discovery in Activity-Based Sensor Networks

DEFF Research Database (Denmark)

Bucur, Doina; Bardram, Jakob

This paper proposes a service discovery protocol for sensor networks that is specifically tailored for use in humancentered pervasive environments. It uses the high-level concept of computational activities (as logical bundles of data and resources) to give sensors in Activity-Based Sensor Networ....... ABSN enhances the generic Extended Zone Routing Protocol with logical sensor grouping and greatly lowers network overhead during the process of discovery, while keeping discovery latency close to optimal.......This paper proposes a service discovery protocol for sensor networks that is specifically tailored for use in humancentered pervasive environments. It uses the high-level concept of computational activities (as logical bundles of data and resources) to give sensors in Activity-Based Sensor Networks...... (ABSNs) knowledge about their usage even at the network layer. ABSN redesigns classical network-level service discovery protocols to include and use this logical structuring of the network for a more practically applicable service discovery scheme. Noting that in practical settings activity-based sensor...

NMR approaches in structure-based lead discovery: recent developments and new frontiers for targeting multi-protein complexes.

Science.gov (United States)

Dias, David M; Ciulli, Alessio

2014-01-01

Nuclear magnetic resonance (NMR) spectroscopy is a pivotal method for structure-based and fragment-based lead discovery because it is one of the most robust techniques to provide information on protein structure, dynamics and interaction at an atomic level in solution. Nowadays, in most ligand screening cascades, NMR-based methods are applied to identify and structurally validate small molecule binding. These can be high-throughput and are often used synergistically with other biophysical assays. Here, we describe current state-of-the-art in the portfolio of available NMR-based experiments that are used to aid early-stage lead discovery. We then focus on multi-protein complexes as targets and how NMR spectroscopy allows studying of interactions within the high molecular weight assemblies that make up a vast fraction of the yet untargeted proteome. Finally, we give our perspective on how currently available methods could build an improved strategy for drug discovery against such challenging targets. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Price discovery in a continuous-time setting

DEFF Research Database (Denmark)

Dias, Gustavo Fruet; Fernandes, Marcelo; Scherrer, Cristina

We formulate a continuous-time price discovery model in which the price discovery measure varies (stochastically) at daily frequency. We estimate daily measures of price discovery using a kernel-based OLS estimator instead of running separate daily VECM regressions as standard in the literature. We...... show that our estimator is not only consistent, but also outperforms the standard daily VECM in finite samples. We illustrate our theoretical findings by studying the price discovery process of 10 actively traded stocks in the U.S. from 2007 to 2013....

Defining Creativity with Discovery

OpenAIRE

Wilson, Nicholas Charles; Martin, Lee

2017-01-01

The standard definition of creativity has enabled significant empirical and theoretical advances, yet contains philosophical conundrums concerning the nature of novelty and the role of recognition and values. In this work we offer an act of conceptual valeting that addresses these issues and in doing so, argue that creativity definitions can be extended through the use of discovery. Drawing on dispositional realist philosophy we outline why adding the discovery and bringing into being of new ...

On the antiproton discovery

International Nuclear Information System (INIS)

Piccioni, O.

1989-01-01

The author of this article describes his own role in the discovery of the antiproton. Although Segre and Chamberlain received the Nobel Prize in 1959 for its discovery, the author claims that their experimental method was his idea which he communicated to them informally in December 1954. He describes how his application for citizenship (he was Italian), and other scientists' manipulation, prevented him from being at Berkeley to work on the experiment himself. (UK)

Accelerating the discovery of materials for clean energy in the era of smart automation

Science.gov (United States)

Tabor, Daniel P.; Roch, Loïc M.; Saikin, Semion K.; Kreisbeck, Christoph; Sheberla, Dennis; Montoya, Joseph H.; Dwaraknath, Shyam; Aykol, Muratahan; Ortiz, Carlos; Tribukait, Hermann; Amador-Bedolla, Carlos; Brabec, Christoph J.; Maruyama, Benji; Persson, Kristin A.; Aspuru-Guzik, Alán

2018-05-01

The discovery and development of novel materials in the field of energy are essential to accelerate the transition to a low-carbon economy. Bringing recent technological innovations in automation, robotics and computer science together with current approaches in chemistry, materials synthesis and characterization will act as a catalyst for revolutionizing traditional research and development in both industry and academia. This Perspective provides a vision for an integrated artificial intelligence approach towards autonomous materials discovery, which, in our opinion, will emerge within the next 5 to 10 years. The approach we discuss requires the integration of the following tools, which have already seen substantial development to date: high-throughput virtual screening, automated synthesis planning, automated laboratories and machine learning algorithms. In addition to reducing the time to deployment of new materials by an order of magnitude, this integrated approach is expected to lower the cost associated with the initial discovery. Thus, the price of the final products (for example, solar panels, batteries and electric vehicles) will also decrease. This in turn will enable industries and governments to meet more ambitious targets in terms of reducing greenhouse gas emissions at a faster pace.

Research on hotspot discovery in internet public opinions based on improved K-means.

Science.gov (United States)

Wang, Gensheng

2013-01-01

How to discover hotspot in the Internet public opinions effectively is a hot research field for the researchers related which plays a key role for governments and corporations to find useful information from mass data in the Internet. An improved K-means algorithm for hotspot discovery in internet public opinions is presented based on the analysis of existing defects and calculation principle of original K-means algorithm. First, some new methods are designed to preprocess website texts, select and express the characteristics of website texts, and define the similarity between two website texts, respectively. Second, clustering principle and the method of initial classification centers selection are analyzed and improved in order to overcome the limitations of original K-means algorithm. Finally, the experimental results verify that the improved algorithm can improve the clustering stability and classification accuracy of hotspot discovery in internet public opinions when used in practice.

Research on Hotspot Discovery in Internet Public Opinions Based on Improved K-Means

Science.gov (United States)

2013-01-01

How to discover hotspot in the Internet public opinions effectively is a hot research field for the researchers related which plays a key role for governments and corporations to find useful information from mass data in the Internet. An improved K-means algorithm for hotspot discovery in internet public opinions is presented based on the analysis of existing defects and calculation principle of original K-means algorithm. First, some new methods are designed to preprocess website texts, select and express the characteristics of website texts, and define the similarity between two website texts, respectively. Second, clustering principle and the method of initial classification centers selection are analyzed and improved in order to overcome the limitations of original K-means algorithm. Finally, the experimental results verify that the improved algorithm can improve the clustering stability and classification accuracy of hotspot discovery in internet public opinions when used in practice. PMID:24106496

43 CFR 4.826 - Discovery.

Science.gov (United States)

2010-10-01

... Review Under Part 17 of This Title-Nondiscrimination in Federally Assisted Programs of the Department of... the person from whom discovery is sought, and for good cause shown, the administrative law judge may make any order which justice requires to limit or condition discovery in order to protect a party or...

76 FR 25362 - Cooperative Research and Development Agreement: Butanol Fuel Blend Usage With Marine Outboard...

Science.gov (United States)

2011-05-04

... participants would identify and investigate the advantages, disadvantages, required technology enhancements... Development Agreements (CRADAs), are authorized by the Federal Technology Transfer Act of 1986 (Pub. L. 99- 502, codified at 15 U.S.C. 3710(a)). A CRADA promotes the transfer of technology to the private sector...

Resource-estimation models and predicted discovery

International Nuclear Information System (INIS)

Hill, G.W.

1982-01-01

Resources have been estimated by predictive extrapolation from past discovery experience, by analogy with better explored regions, or by inference from evidence of depletion of targets for exploration. Changes in technology and new insights into geological mechanisms have occurred sufficiently often in the long run to form part of the pattern of mature discovery experience. The criterion, that a meaningful resource estimate needs an objective measure of its precision or degree of uncertainty, excludes 'estimates' based solely on expert opinion. This is illustrated by development of error measures for several persuasive models of discovery and production of oil and gas in USA, both annually and in terms of increasing exploration effort. Appropriate generalizations of the models resolve many points of controversy. This is illustrated using two USA data sets describing discovery of oil and of U 3 O 8 ; the latter set highlights an inadequacy of available official data. Review of the oil-discovery data set provides a warrant for adjusting the time-series prediction to a higher resource figure for USA petroleum. (author)

The Knowledge-Integrated Network Biomarkers Discovery for Major Adverse Cardiac Events

Science.gov (United States)

Jin, Guangxu; Zhou, Xiaobo; Wang, Honghui; Zhao, Hong; Cui, Kemi; Zhang, Xiang-Sun; Chen, Luonan; Hazen, Stanley L.; Li, King; Wong, Stephen T. C.

2010-01-01

The mass spectrometry (MS) technology in clinical proteomics is very promising for discovery of new biomarkers for diseases management. To overcome the obstacles of data noises in MS analysis, we proposed a new approach of knowledge-integrated biomarker discovery using data from Major Adverse Cardiac Events (MACE) patients. We first built up a cardiovascular-related network based on protein information coming from protein annotations in Uniprot, protein–protein interaction (PPI), and signal transduction database. Distinct from the previous machine learning methods in MS data processing, we then used statistical methods to discover biomarkers in cardiovascular-related network. Through the tradeoff between known protein information and data noises in mass spectrometry data, we finally could firmly identify those high-confident biomarkers. Most importantly, aided by protein–protein interaction network, that is, cardiovascular-related network, we proposed a new type of biomarkers, that is, network biomarkers, composed of a set of proteins and the interactions among them. The candidate network biomarkers can classify the two groups of patients more accurately than current single ones without consideration of biological molecular interaction. PMID:18665624

Discovery Mondays - “Relativity Theory... strange! Did you say strange?”

CERN Multimedia

2005-01-01

We all know that famous equation E=mc2, but do you know its true significance? Relativity theory: what is the meaning of this strange concept which plunged the physics world into turmoil 100 years ago? What effects can be observed today? Did you know that the GPS system would not work if relativity was not taken into account? The next Discovery Monday will take you on a journey into a strange world. You will be able to witness for yourselves the consequences of Einstein's theories. How, for example, can relativity theory be tested by eclipses? What consequences does it have for the accelerators at CERN? How can it be used to measure the mass of enormous black holes? And finally, how is it linked to the puzzle surrounding the missing mass of the Universe? As part of the World Year of Physics, the next Discovery Monday will be dedicated to one of the theories that Einstein published in 1905, his “annus mirabilis”. Join us at the Microcosm (Reception Building 33, Meyrin site), on Monday 5th September ...

Discovery Mondays - “Relativity Theory... strange! Did you say strange?”

CERN Multimedia

2005-01-01

We all know that famous equation E=mc2, but do you know its true significance? Relativity theory: what is the meaning of this strange concept which plunged the physics world into turmoil 100 years ago? What effects can be observed today? Did you know that the GPS system would not work if relativity was not taken into account? The next Discovery Monday will take you on a journey into a strange world. You will be able to witness for yourselves the consequences of Einstein's theories. How, for example, can relativity theory be tested by eclipses? What consequences does it have for the accelerators at CERN? How can it be used to measure the mass of enormous black holes? And finally, how is it linked to the puzzle surrounding the missing mass of the Universe? As part of the World Year of Physics, the next Discovery Monday will be dedicated to one of the theories that Einstein published in 1905, his “annus mirabilis”. Join us at the Microcosm (Reception Building 33, Meyrin site), on Monday 5th Septemb...

Automated discovery systems and the inductivist controversy

Science.gov (United States)

Giza, Piotr

2017-09-01

The paper explores possible influences that some developments in the field of branches of AI, called automated discovery and machine learning systems, might have upon some aspects of the old debate between Francis Bacon's inductivism and Karl Popper's falsificationism. Donald Gillies facetiously calls this controversy 'the duel of two English knights', and claims, after some analysis of historical cases of discovery, that Baconian induction had been used in science very rarely, or not at all, although he argues that the situation has changed with the advent of machine learning systems. (Some clarification of terms machine learning and automated discovery is required here. The key idea of machine learning is that, given data with associated outcomes, software can be trained to make those associations in future cases which typically amounts to inducing some rules from individual cases classified by the experts. Automated discovery (also called machine discovery) deals with uncovering new knowledge that is valuable for human beings, and its key idea is that discovery is like other intellectual tasks and that the general idea of heuristic search in problem spaces applies also to discovery tasks. However, since machine learning systems discover (very low-level) regularities in data, throughout this paper I use the generic term automated discovery for both kinds of systems. I will elaborate on this later on). Gillies's line of argument can be generalised: thanks to automated discovery systems, philosophers of science have at their disposal a new tool for empirically testing their philosophical hypotheses. Accordingly, in the paper, I will address the question, which of the two philosophical conceptions of scientific method is better vindicated in view of the successes and failures of systems developed within three major research programmes in the field: machine learning systems in the Turing tradition, normative theory of scientific discovery formulated by Herbert Simon

7 CFR 283.28 - Discovery.

Science.gov (United States)

2010-01-01

... 7 Agriculture 4 2010-01-01 2010-01-01 false Discovery. 283.28 Section 283.28 Agriculture Regulations of the Department of Agriculture (Continued) FOOD AND NUTRITION SERVICE, DEPARTMENT OF AGRICULTURE... Appeals of QC Claims of Less Than $50,000 § 283.28 Discovery. Upon motion and as ordered by the ALJ...

Discovery of charm

International Nuclear Information System (INIS)

Goldhaber, G.

1984-11-01

In my talk I will cover the period 1973 to 1976 which saw the discoveries of the J/psi and psi' resonances and most of the Psion spectroscopy, the tau lepton and the D 0 ,D + charmed meson doublet. Occasionally I will refer briefly to more recent results. Since this conference is on the history of the weak-interactions I will deal primarily with the properties of naked charm and in particular the weakly decaying doublet of charmed mesons. Most of the discoveries I will mention were made with the SLAC-LBL Magnetic Detector or MARK I which we operated at SPEAR from 1973 to 1976. 27 references

Data mining-aided materials discovery and optimization

Directory of Open Access Journals (Sweden)

Wencong Lu

2017-09-01

Full Text Available Recent developments in data mining-aided materials discovery and optimization are reviewed in this paper, and an introduction to the materials data mining (MDM process is provided using case studies. Both qualitative and quantitative methods in machine learning can be adopted in the MDM process to accomplish different tasks in materials discovery, design, and optimization. State-of-the-art techniques in data mining-aided materials discovery and optimization are demonstrated by reviewing the controllable synthesis of dendritic Co3O4 superstructures, materials design of layered double hydroxide, battery materials discovery, and thermoelectric materials design. The results of the case studies indicate that MDM is a powerful approach for use in materials discovery and innovation, and will play an important role in the development of the Materials Genome Initiative and Materials Informatics.

Scientific Discoveries: What Is Required for Lasting Impact.

Science.gov (United States)

Lømo, Terje

2016-01-01

I have been involved in two scientific discoveries of some impact. One is the discovery of long-term potentiation (LTP), the phenomenon that brief, high-frequency impulse activity at synapses in the brain can lead to long-lasting increases in their efficiency of transmission. This finding demonstrated that synapses are plastic, a property thought to be necessary for learning and memory. The other discovery is that nerve-evoked muscle impulse activity, rather than putative trophic factors, controls the properties of muscle fibers. Here I describe how these two discoveries were made, the unexpected difficulties of reproducing the first discovery, and the controversies that followed the second discovery. I discuss why the first discovery took many years to become generally recognized, whereas the second caused an immediate sensation and entered textbooks and major reviews but is now largely forgotten. In the long run, discovering a new phenomenon has greater impact than falsifying a popular hypothesis.

12 CFR 509.102 - Discovery.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Discovery. 509.102 Section 509.102 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY RULES OF PRACTICE AND PROCEDURE IN ADJUDICATORY PROCEEDINGS Local Rules § 509.102 Discovery. (a) In general. A party may take the deposition of an...

Deep Learning in Drug Discovery.

Science.gov (United States)

Gawehn, Erik; Hiss, Jan A; Schneider, Gisbert

2016-01-01

Artificial neural networks had their first heyday in molecular informatics and drug discovery approximately two decades ago. Currently, we are witnessing renewed interest in adapting advanced neural network architectures for pharmaceutical research by borrowing from the field of "deep learning". Compared with some of the other life sciences, their application in drug discovery is still limited. Here, we provide an overview of this emerging field of molecular informatics, present the basic concepts of prominent deep learning methods and offer motivation to explore these techniques for their usefulness in computer-assisted drug discovery and design. We specifically emphasize deep neural networks, restricted Boltzmann machine networks and convolutional networks. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Bioinformatics in translational drug discovery.

Science.gov (United States)

Wooller, Sarah K; Benstead-Hume, Graeme; Chen, Xiangrong; Ali, Yusuf; Pearl, Frances M G

2017-08-31

Bioinformatics approaches are becoming ever more essential in translational drug discovery both in academia and within the pharmaceutical industry. Computational exploitation of the increasing volumes of data generated during all phases of drug discovery is enabling key challenges of the process to be addressed. Here, we highlight some of the areas in which bioinformatics resources and methods are being developed to support the drug discovery pipeline. These include the creation of large data warehouses, bioinformatics algorithms to analyse 'big data' that identify novel drug targets and/or biomarkers, programs to assess the tractability of targets, and prediction of repositioning opportunities that use licensed drugs to treat additional indications. © 2017 The Author(s).

GeoSearch: A lightweight broking middleware for geospatial resources discovery

Science.gov (United States)

Gui, Z.; Yang, C.; Liu, K.; Xia, J.

2012-12-01

With petabytes of geodata, thousands of geospatial web services available over the Internet, it is critical to support geoscience research and applications by finding the best-fit geospatial resources from the massive and heterogeneous resources. Past decades' developments witnessed the operation of many service components to facilitate geospatial resource management and discovery. However, efficient and accurate geospatial resource discovery is still a big challenge due to the following reasons: 1)The entry barriers (also called "learning curves") hinder the usability of discovery services to end users. Different portals and catalogues always adopt various access protocols, metadata formats and GUI styles to organize, present and publish metadata. It is hard for end users to learn all these technical details and differences. 2)The cost for federating heterogeneous services is high. To provide sufficient resources and facilitate data discovery, many registries adopt periodic harvesting mechanism to retrieve metadata from other federated catalogues. These time-consuming processes lead to network and storage burdens, data redundancy, and also the overhead of maintaining data consistency. 3)The heterogeneous semantics issues in data discovery. Since the keyword matching is still the primary search method in many operational discovery services, the search accuracy (precision and recall) is hard to guarantee. Semantic technologies (such as semantic reasoning and similarity evaluation) offer a solution to solve these issues. However, integrating semantic technologies with existing service is challenging due to the expandability limitations on the service frameworks and metadata templates. 4)The capabilities to help users make final selection are inadequate. Most of the existing search portals lack intuitive and diverse information visualization methods and functions (sort, filter) to present, explore and analyze search results. Furthermore, the presentation of the value

Natural Products for Drug Discovery in the 21st Century: Innovations for Novel Drug Discovery

Directory of Open Access Journals (Sweden)

Nicholas Ekow Thomford

2018-05-01

Full Text Available The therapeutic properties of plants have been recognised since time immemorial. Many pathological conditions have been treated using plant-derived medicines. These medicines are used as concoctions or concentrated plant extracts without isolation of active compounds. Modern medicine however, requires the isolation and purification of one or two active compounds. There are however a lot of global health challenges with diseases such as cancer, degenerative diseases, HIV/AIDS and diabetes, of which modern medicine is struggling to provide cures. Many times the isolation of “active compound” has made the compound ineffective. Drug discovery is a multidimensional problem requiring several parameters of both natural and synthetic compounds such as safety, pharmacokinetics and efficacy to be evaluated during drug candidate selection. The advent of latest technologies that enhance drug design hypotheses such as Artificial Intelligence, the use of ‘organ-on chip’ and microfluidics technologies, means that automation has become part of drug discovery. This has resulted in increased speed in drug discovery and evaluation of the safety, pharmacokinetics and efficacy of candidate compounds whilst allowing novel ways of drug design and synthesis based on natural compounds. Recent advances in analytical and computational techniques have opened new avenues to process complex natural products and to use their structures to derive new and innovative drugs. Indeed, we are in the era of computational molecular design, as applied to natural products. Predictive computational softwares have contributed to the discovery of molecular targets of natural products and their derivatives. In future the use of quantum computing, computational softwares and databases in modelling molecular interactions and predicting features and parameters needed for drug development, such as pharmacokinetic and pharmacodynamics, will result in few false positive leads in drug

Natural Products for Drug Discovery in the 21st Century: Innovations for Novel Drug Discovery.

Science.gov (United States)

Thomford, Nicholas Ekow; Senthebane, Dimakatso Alice; Rowe, Arielle; Munro, Daniella; Seele, Palesa; Maroyi, Alfred; Dzobo, Kevin

2018-05-25

The therapeutic properties of plants have been recognised since time immemorial. Many pathological conditions have been treated using plant-derived medicines. These medicines are used as concoctions or concentrated plant extracts without isolation of active compounds. Modern medicine however, requires the isolation and purification of one or two active compounds. There are however a lot of global health challenges with diseases such as cancer, degenerative diseases, HIV/AIDS and diabetes, of which modern medicine is struggling to provide cures. Many times the isolation of "active compound" has made the compound ineffective. Drug discovery is a multidimensional problem requiring several parameters of both natural and synthetic compounds such as safety, pharmacokinetics and efficacy to be evaluated during drug candidate selection. The advent of latest technologies that enhance drug design hypotheses such as Artificial Intelligence, the use of 'organ-on chip' and microfluidics technologies, means that automation has become part of drug discovery. This has resulted in increased speed in drug discovery and evaluation of the safety, pharmacokinetics and efficacy of candidate compounds whilst allowing novel ways of drug design and synthesis based on natural compounds. Recent advances in analytical and computational techniques have opened new avenues to process complex natural products and to use their structures to derive new and innovative drugs. Indeed, we are in the era of computational molecular design, as applied to natural products. Predictive computational softwares have contributed to the discovery of molecular targets of natural products and their derivatives. In future the use of quantum computing, computational softwares and databases in modelling molecular interactions and predicting features and parameters needed for drug development, such as pharmacokinetic and pharmacodynamics, will result in few false positive leads in drug development. This review

Arthritis Genetics Analysis Aids Drug Discovery

Science.gov (United States)

... NIH Research Matters January 13, 2014 Arthritis Genetics Analysis Aids Drug Discovery An international research team identified 42 new ... Edition Distracted Driving Raises Crash Risk Arthritis Genetics Analysis Aids Drug Discovery Oxytocin Affects Facial Recognition Connect with Us ...

Solution NMR Spectroscopy in Target-Based Drug Discovery.

Science.gov (United States)

Li, Yan; Kang, Congbao

2017-08-23

Solution NMR spectroscopy is a powerful tool to study protein structures and dynamics under physiological conditions. This technique is particularly useful in target-based drug discovery projects as it provides protein-ligand binding information in solution. Accumulated studies have shown that NMR will play more and more important roles in multiple steps of the drug discovery process. In a fragment-based drug discovery process, ligand-observed and protein-observed NMR spectroscopy can be applied to screen fragments with low binding affinities. The screened fragments can be further optimized into drug-like molecules. In combination with other biophysical techniques, NMR will guide structure-based drug discovery. In this review, we describe the possible roles of NMR spectroscopy in drug discovery. We also illustrate the challenges encountered in the drug discovery process. We include several examples demonstrating the roles of NMR in target-based drug discoveries such as hit identification, ranking ligand binding affinities, and mapping the ligand binding site. We also speculate the possible roles of NMR in target engagement based on recent processes in in-cell NMR spectroscopy.

Bioinformatics for cancer immunotherapy target discovery

DEFF Research Database (Denmark)

Olsen, Lars Rønn; Campos, Benito; Barnkob, Mike Stein

2014-01-01

therapy target discovery in a bioinformatics analysis pipeline. We describe specialized bioinformatics tools and databases for three main bottlenecks in immunotherapy target discovery: the cataloging of potentially antigenic proteins, the identification of potential HLA binders, and the selection epitopes...

Generation of life in a test tube: Albert Szent-Gyorgyi, Bruno Straub, and the discovery of actin.

Science.gov (United States)

Rall, Jack A

2018-06-01

This is a story about a great scientist, luck, great discovery that changed the future direction of muscle research, war, a clandestine war mission, postwar politics, and an attempt to rewrite scientific history. Albert Szent-Gyorgyi, at 44 yr of age, won the Nobel Prize in 1937 for his work on vitamin C and the establishment of the groundwork of the citric acid cycle. He now wanted to investigate one of the fundamental aspects of life and settled on the study of muscle contraction. The Szent-Gyorgyi laboratory in Hungary during World War II demonstrated that contraction could be reproduced in vitro by threads consisting of just two proteins, myosin and the newly discovered protein by Bruno Straub that they called actin. Szent-Gyorgyi called seeing the contraction of these threads, which occurred in the presence of ATP and ions, "the most thrilling moment" of his scientific life. This major discovery of the generation of "life" in a test tube was totally unknown for years by the rest of the world because of the war. When the discovery was finally communicated to the world, it was not immediately accepted by all as being relevant to the physiology of muscle contraction. Nonetheless, this discovery opened up the modern phase of muscle research. Serendipity played an important role in the great discovery, and much later politics would lead to a shocking controversy around the true discoverer of actin.

Wax Point Determinations Using Acoustic Resonance Spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Bostick, D.T.; Jubin, R.T.; Schmidt, T.W.

2001-06-01

The thermodynamic characterization of the wax point of a given crude is essential in order to maintain flow conditions that prevent plugging of undersea pipelines. This report summarizes the efforts made towards applying an Acoustic Cavity Resonance Spectrometer (ACRS) to the determination of pressures and temperatures at which wax precipitates from crude. Phillips Petroleum Company, Inc., the CRADA participant, supplied the ACRS. The instrumentation was shipped to Dr. Thomas Schmidt of ORNL, the CRADA contractor, in May 2000 after preliminary software development performed under the guidance of Dr. Samuel Colgate and Dr. Evan House of the University of Florida, Gainesville, Fl. Upon receipt it became apparent that a number of modifications still needed to be made before the ACRS could be precisely and safely used for wax point measurements. This report reviews the sequence of alterations made to the ACRS, as well as defines the possible applications of the instrumentation once the modifications have been completed. The purpose of this Cooperative Research and Development Agreement (CRADA) between Phillips Petroleum Company, Inc. (Participant) and Lockheed Martin Energy Research Corporation (Contractor) was the measurement of the formation of solids in crude oils and petroleum products that are commonly transported through pipelines. This information is essential in the proper design, operation and maintenance of the petroleum pipeline system in the United States. Recently, new petroleum discoveries in the Gulf of Mexico have shown that there is a potential for plugging of undersea pipeline because of the precipitation of wax. It is important that the wax points of the expected crude oils be well characterized so that the production facilities for these new wells are capable of properly transporting the expected production. The goal of this work is to perform measurements of solids formation in crude oils and petroleum products supplied by the Participant. It is

Proteomic and metabolomic approaches to biomarker discovery

CERN Document Server

Issaq, Haleem J

2013-01-01

Proteomic and Metabolomic Approaches to Biomarker Discovery demonstrates how to leverage biomarkers to improve accuracy and reduce errors in research. Disease biomarker discovery is one of the most vibrant and important areas of research today, as the identification of reliable biomarkers has an enormous impact on disease diagnosis, selection of treatment regimens, and therapeutic monitoring. Various techniques are used in the biomarker discovery process, including techniques used in proteomics, the study of the proteins that make up an organism, and metabolomics, the study of chemical fingerprints created from cellular processes. Proteomic and Metabolomic Approaches to Biomarker Discovery is the only publication that covers techniques from both proteomics and metabolomics and includes all steps involved in biomarker discovery, from study design to study execution.  The book describes methods, and presents a standard operating procedure for sample selection, preparation, and storage, as well as data analysis...

Discovery of the Higgs boson

CERN Document Server

Sharma, Vivek

2016-01-01

The recent observation of the Higgs boson has been hailed as the scientific discovery of the century and led to the 2013 Nobel Prize in physics. This book describes the detailed science behind the decades-long search for this elusive particle at the Large Electron Positron Collider at CERN and at the Tevatron at Fermilab and its subsequent discovery and characterization at the Large Hadron Collider at CERN. Written by physicists who played leading roles in this epic search and discovery, this book is an authoritative and pedagogical exposition of the portrait of the Higgs boson that has emerged from a large number of experimental measurements. As the first of its kind, this book should be of interest to graduate students and researchers in particle physics.

Price discovery in European natural gas markets

International Nuclear Information System (INIS)

Schultz, Emma; Swieringa, John

2013-01-01

We provide the first high-frequency investigation of price discovery within the physical and financial layers of Europe's natural gas markets. Testing not only looks at short-term return dynamics, but also considers each security's contribution to price equilibrium in the longer-term. Results show that UK natural gas futures traded on the Intercontinental Exchange display greater price discovery than physical trading at various hubs throughout Europe. - Highlights: • We use intraday data to gauge price discovery in European natural gas markets. • We explore short and long-term dynamics in physical and financial market layers. • Results show ICE's UK natural gas futures are the main venue for price discovery

Intraday Price Discovery in Fragmented Markets

NARCIS (Netherlands)

S.R. Ozturk (Sait); M. van der Wel (Michel); D.J.C. van Dijk (Dick)

2014-01-01

textabstractFor many assets, trading is fragmented across multiple exchanges. Price discovery measures summarize the informativeness of trading on each venue for discovering the asset’s true underlying value. We explore intraday variation in price discovery using a structural model with

A Taxonomy of Self-configuring Service Discovery Systems

NARCIS (Netherlands)

Sundramoorthy, V.; Hartel, Pieter H.; Scholten, Johan

2007-01-01

We analyze the fundamental concepts and issues in service discovery. This analysis places service discovery in the context of distributed systems by describing service discovery as a third generation naming system. We also describe the essential architectures and the functionalities in service

Discovery stories in the science classroom

Science.gov (United States)

Arya, Diana Jaleh

School science has been criticized for its lack of emphasis on the tentative, dynamic nature of science as a process of learning more about our world. This criticism is the guiding force for this present body of work, which focuses on the question: what are the educational benefits for middle school students of reading texts that highlight the process of science in the form of a discovery narrative? This dissertation traces my journey through a review of theoretical perspectives of narrative, an analysis of first-hand accounts of scientific discovery, the complex process of developing age-appropriate, cohesive and engaging science texts for middle school students, and a comparison study (N=209) that seeks to determine the unique benefits of the scientific discovery narrative for the interest in and retained understanding of conceptual information presented in middle school science texts. A total of 209 middle school participants in nine different classrooms from two different schools participated in the experimental study. Each subject read two science texts that differed in topic (the qualities of and uses for radioactive elements and the use of telescopic technology to see planets in space) and genre (the discovery narrative and the "conceptually known exposition" comparison text). The differences between the SDN and CKE versions for each topic were equivalent in all possible ways (initial introduction, overall conceptual accuracy, elements of human interest, coherence and readability level), save for the unique components of the discovery narrative (i.e., love for their work, acknowledgement of the known, identification of the unknown and the explorative or experimental process to discovery). Participants generally chose the discovery narrative version as the more interesting of the two texts. Additional findings from the experimental study suggest that science texts in the form of SDNs elicit greater long-term retention of key conceptual information, especially

Applied metabolomics in drug discovery.

Science.gov (United States)

Cuperlovic-Culf, M; Culf, A S

2016-08-01

The metabolic profile is a direct signature of phenotype and biochemical activity following any perturbation. Metabolites are small molecules present in a biological system including natural products as well as drugs and their metabolism by-products depending on the biological system studied. Metabolomics can provide activity information about possible novel drugs and drug scaffolds, indicate interesting targets for drug development and suggest binding partners of compounds. Furthermore, metabolomics can be used for the discovery of novel natural products and in drug development. Metabolomics can enhance the discovery and testing of new drugs and provide insight into the on- and off-target effects of drugs. This review focuses primarily on the application of metabolomics in the discovery of active drugs from natural products and the analysis of chemical libraries and the computational analysis of metabolic networks. Metabolomics methodology, both experimental and analytical is fast developing. At the same time, databases of compounds are ever growing with the inclusion of more molecular and spectral information. An increasing number of systems are being represented by very detailed metabolic network models. Combining these experimental and computational tools with high throughput drug testing and drug discovery techniques can provide new promising compounds and leads.

A social network analysis of treatment discoveries in cancer.

Directory of Open Access Journals (Sweden)

Athanasios Tsalatsanis

2011-03-01

Full Text Available Controlled clinical trials are widely considered to be the vehicle to treatment discovery in cancer that leads to significant improvements in health outcomes including an increase in life expectancy. We have previously shown that the pattern of therapeutic discovery in randomized controlled trials (RCTs can be described by a power law distribution. However, the mechanism generating this pattern is unknown. Here, we propose an explanation in terms of the social relations between researchers in RCTs. We use social network analysis to study the impact of interactions between RCTs on treatment success. Our dataset consists of 280 phase III RCTs conducted by the NCI from 1955 to 2006. The RCT networks are formed through trial interactions formed i at random, ii based on common characteristics, or iii based on treatment success. We analyze treatment success in terms of survival hazard ratio as a function of the network structures. Our results show that the discovery process displays power law if there are preferential interactions between trials that may stem from researchers' tendency to interact selectively with established and successful peers. Furthermore, the RCT networks are "small worlds": trials are connected through a small number of ties, yet there is much clustering among subsets of trials. We also find that treatment success (improved survival is proportional to the network centrality measures of closeness and betweenness. Negative correlation exists between survival and the extent to which trials operate within a limited scope of information. Finally, the trials testing curative treatments in solid tumors showed the highest centrality and the most influential group was the ECOG. We conclude that the chances of discovering life-saving treatments are directly related to the richness of social interactions between researchers inherent in a preferential interaction model.

Predicting future discoveries from current scientific literature.

Science.gov (United States)

Petrič, Ingrid; Cestnik, Bojan

2014-01-01

Knowledge discovery in biomedicine is a time-consuming process starting from the basic research, through preclinical testing, towards possible clinical applications. Crossing of conceptual boundaries is often needed for groundbreaking biomedical research that generates highly inventive discoveries. We demonstrate the ability of a creative literature mining method to advance valuable new discoveries based on rare ideas from existing literature. When emerging ideas from scientific literature are put together as fragments of knowledge in a systematic way, they may lead to original, sometimes surprising, research findings. If enough scientific evidence is already published for the association of such findings, they can be considered as scientific hypotheses. In this chapter, we describe a method for the computer-aided generation of such hypotheses based on the existing scientific literature. Our literature-based discovery of NF-kappaB with its possible connections to autism was recently approved by scientific community, which confirms the ability of our literature mining methodology to accelerate future discoveries based on rare ideas from existing literature.

The neutron discovery

International Nuclear Information System (INIS)

Six, J.

1987-01-01

The neutron: who had first the idea, who discovered it, who established its main properties. To these apparently simple questions, multiple answers exist. The progressive discovery of the neutron is a marvellous illustration of some characteristics of the scientific research, where the unforeseen may be combined with the expected. This discovery is replaced in the context of the 1930's scientific effervescence that succeeded the revolutionary introduction of quantum mechanics. This book describes the works of Bothe, the Joliot-Curie and Chadwick which led to the neutron in an unexpected way. A historical analysis allows to give a new interpretation on the hypothesis suggested by the Joliot-Curie. Some texts of these days will help the reader to revive this fascinating story [fr

Viral pathogen discovery

Science.gov (United States)

Chiu, Charles Y

2015-01-01

Viral pathogen discovery is of critical importance to clinical microbiology, infectious diseases, and public health. Genomic approaches for pathogen discovery, including consensus polymerase chain reaction (PCR), microarrays, and unbiased next-generation sequencing (NGS), have the capacity to comprehensively identify novel microbes present in clinical samples. Although numerous challenges remain to be addressed, including the bioinformatics analysis and interpretation of large datasets, these technologies have been successful in rapidly identifying emerging outbreak threats, screening vaccines and other biological products for microbial contamination, and discovering novel viruses associated with both acute and chronic illnesses. Downstream studies such as genome assembly, epidemiologic screening, and a culture system or animal model of infection are necessary to establish an association of a candidate pathogen with disease. PMID:23725672

Borated stainless steel joining technology. Final report

International Nuclear Information System (INIS)

Smith, R.J.

1994-12-01

EPRI had continued investigating the application of borated stainless steel products within the US commercial nuclear power industry through participation in a wide range of activities. This effort provides the documentation of the data obtained in the development of the ASTM-A887 Specification preparation effort conducted by Applied Science and Technology and the most recent efforts for the development of joining technologies conducted under a joint effort by EPRI, Carpenter Technologies and Sandia National Laboratory under a US DOE CRADA program. The data presented in this report provides the basis for the ASTM specification which has been previously unpublished by EPRI and the data generated in support of the Joining Technology research effort conducted at Sandia. The results of the Sandia research, although terminated prior to the completion, confirms earlier data that the degradation of material properties in fusion welded borated stainless steels occurs in the heat affected zone of the weld area and not in the base material. The data obtained also supports the conclusion that the degradation of material properties can be overcome by post weld heat treatment which can result in material properties near the original unwelded metal

Predictors of timing of pregnancy discovery.

Science.gov (United States)

McCarthy, Molly; Upadhyay, Ushma; Biggs, M Antonia; Anthony, Renaisa; Holl, Jennifer; Roberts, Sarah Cm

2018-04-01

Earlier pregnancy discovery is important in the context of prenatal and abortion care. We evaluated characteristics associated with later pregnancy discovery among women seeking abortion care. Data come from a survey of women seeking abortion care at four family planning facilities in Utah. The participants completed a survey during the state-mandated abortion information visit they are required to complete prior to having an abortion. The outcome in this study was pregnancy discovery before versus after 6 weeks since respondents' last menstrual period (LMP). We used logistic regression to estimate the relationship between sociodemographic and health-related independent variables of interest and pregnancy discovery before versus after 6 weeks. Among the 458 women in the sample, 28% discovered their pregnancy later than 6 weeks since LMP. Most (n=366, 80%) knew the exact date of their LMP and a significant minority estimated it (n=92, 20%). Those who estimated the date of their LMP had higher odds of later pregnancy discovery than those who knew the exact date (adjusted odds ratio (aOR)=1.81[1.07-3.07]). Those who used illicit drugs weekly, daily, or almost daily had higher odds of later pregnancy discovery (aOR=6.33[2.44, 16.40]). Women who did not track their menstrual periods and those who frequently used drugs had higher odds of discovering their pregnancies later. Women who estimated the date of their LMP and who frequently used drugs may benefit from strategies to help them recognize their pregnancies earlier and link them to care when they discover their pregnancies later. Copyright © 2017 Elsevier Inc. All rights reserved.

Book Review: Dispute Resolution and e-Discovery

Directory of Open Access Journals (Sweden)

Milton Luoma

2012-09-01

Full Text Available Garrie, D.B., & Griver, Y.M., Eds. (2012. Dispute Resolution and e-Discovery. Thomson Reuters Westlaw, 570 pages, ISBN-13: 9780314604484, US$149.00.Reviewed by Milton Luoma, JD, (Milt.Luoma@metrostate.eduAs is apparent from its title, this book tackles two very current and difficult legal issues – electronic discovery and dispute resolution. The authors tie the two legal concepts together in an effort to provide litigants and practitioners a less expensive and less time consuming alternative than is typically the case with traditional litigation and court proceedings. By including electronic discovery in the discussions, the authors recognize the importance and significance of electronic discovery in mediation and arbitration as it is in traditional litigation.(see PDF for full review

The Discovery of Gravitational Repulsion by Johannes Droste

Science.gov (United States)

McGruder, Charles Hosewell; VanDerMeer, B. Wieb

2018-01-01

In 1687 Newton published his universal law of gravitation, which states that the gravitational force is always attractive. This law is based on our terrestrial experience with slowly moving bodies (v Einstein completed his theory of general relativity (also referred to as Einstein’s Theory of Gravitation), which is valid not just for slowly moving bodies but also for those with relativistic velocities. In 1916 Johannes Droste submitted a PhD thesis on general relativity to his advisor, H.A. Lorentz. In it he calculated the motion of a particle in what he called a “single center” and today we call the Schwarzschild field and found that highly relativistic particles experience gravitational repulsion. Thus, his thesis written in Dutch and never before translated contains the discovery of gravitational repulsion. Because of its historical importance we translate the entire section of his thesis containing the discovery of gravitational repulsion. We also translate his thesis in the hope of clearing up a major historical misconception. Namely, that David Hilbert in 1917 discovered gravitational repulsion. In fact, Hilbert rediscovered it, apparently completely independent of Droste’s work. Finally we note that one of the biggest mysteries of astrophysics is the question of how highly energetic particles in relativistic jets and cosmic rays are accelerated. It has been suggested that gravitational repulsion is the mechanism responsible for these phenomena. An historical understanding of gravitational repulsion is therefore pertinent.

Development of DNA Pillar Chip Final Report CRADA No. TSB-2035-01

Energy Technology Data Exchange (ETDEWEB)

Ness, K. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Long, G. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-16

This was a collaborative effort between The Regents of the University of California, Lawrence Livermore National Laboratory (LLNL) and Tetracore, to demonstrate a proof of principal device for the capture and controlled release of DNA moving within a flow stream.

Solidification Technologies for Radioactive and Chemical Liquid Waste Treatment - Final CRADA Report

International Nuclear Information System (INIS)

Castiglioni, Andrew J.; Gelis, Artem V.

2016-01-01

This project, organized under DOE/NNSA's Global Initiatives for Proliferation Prevention program, joined Russian and DOE scientists in developing more effective solidification and storage technologies for liquid radioactive waste. Several patent applications were filed by the Russian scientists (Russia only) and in 2012, the technology developed was approved by Russia's Federal State Unitary Enterprise RADON for application throughout Russia in cleaning up and disposing of radioactive waste.

Development of Physics Package Sensors Final Report CRADA No. TC02094.0

Energy Technology Data Exchange (ETDEWEB)

Karpenko, V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Salmon, J. [Lockheed Martin Space Systems Company, Sunnyvale, CA (United States)

2017-09-06

The goal of this project was to work together through the project phases to conceive, demonstrate, and produce concepts for detecting, locating, tracking, imaging, and assessing emissions passively or actively. The initial Sensor Concept Exploration Phase was postulated and assessed concepts at a first-order level to ascertain whether the parties’ concepts (either separately developed or jointly developed) had merit for missile defense and homeland security applications

Electromagnetic Simulations for Aerospace Application Final Report CRADA No. TC-0376-92

Energy Technology Data Exchange (ETDEWEB)

Madsen, N. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Meredith, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2018-01-24

Electromagnetic (EM) simulation tools play an important role in the design cycle, allowing optimization of a design before it is fabricated for testing. The purpose of this cooperative project was to provide Lockheed with state-of-the-art electromagnetic (EM) simulation software that will enable the optimal design of the next generation of low-observable (LO) military aircraft through the VHF regime. More particularly, the project was principally code development and validation, its goal to produce a 3-D, conforming grid,time-domain (TD) EM simulation tool, consisting of a mesh generator, a DS13D-based simulation kernel, and an RCS postprocessor, which was useful in the optimization of LO aircraft, both for full-aircraft simulations run on a massively parallel computer and for small scale problems run on a UNIX workstation.

Rapid tooling for functional prototyping of metal mold processes. CRADA final report

Energy Technology Data Exchange (ETDEWEB)

Zacharia, T.; Ludtka, G.M.; Bjerke, M.A.; Gray, W.H.

1997-12-01

The overall scope of this endeavor was to develop an integrated computer system, running on a network of heterogeneous computers, that would allow the rapid development of tool designs, and then use process models to determine whether the initial tooling would have characteristics which produce the prototype parts. The major thrust of this program for ORNL was the definition of the requirements for the development of the integrated die design system with the functional purpose to link part design, tool design, and component fabrication through a seamless software environment. The principal product would be a system control program that would coordinate the various application programs and implement the data transfer so that any networked workstation would be useable. The overall system control architecture was to be required to easily facilitate any changes, upgrades, or replacements of the model from either the manufacturing end or the design criteria standpoint. The initial design of such a program is described in the section labeled ``Control Program Design``. A critical aspect of this research was the design of the system flow chart showing the exact system components and the data to be transferred. All of the major system components would have been configured to ensure data file compatibility and transferability across the Internet. The intent was to use commercially available packages to model the various manufacturing processes for creating the die and die inserts in addition to modeling the processes for which these parts were to be used. In order to meet all of these requirements, investigative research was conducted to determine the system flow features and software components within the various organizations contributing to this project. This research is summarized.

Plastic Substrate Active Matrix Displays Final Report CRADA No. TC-2011-00

Energy Technology Data Exchange (ETDEWEB)

Bernhardt, A. F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Smith, P. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-09-28

This project was a collaborative effort between the University of California, Lawrence Livermore National Laboratory (LLNL) and FlexICs, Inc. to develop thin film transistor (TFT) electronics for active matrix displays.

Technology Assessment for Powertrain Components Final Report CRADA No. TC-1124-95

Energy Technology Data Exchange (ETDEWEB)

Tokarz, F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gough, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-19

LLNL utilized its defense technology assessment methodologies in combination with its capabilities in the energy; manufacturing, and transportation technologies to demonstrate a methodology that synthesized available but incomplete information on advanced automotive technologies into a comprehensive framework.

LST CGM Generator and Viewer Final Report CRADA No. TSB-1558-98

Energy Technology Data Exchange (ETDEWEB)

Vickers, Don [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Larson, Don [Larson Software Technology, Houston, TX (United States)

2017-11-09

The purpose of this project was to jointly develop and test a software plug-in that would convert native Pro /ENGINEER digital engineering drawings to Computer Graphics Metafile (CGM) format. If it was not feasible to convert the Pro/ENGINEER files, we planned to develop and test a similar conversion of native AutoCAD engineering drawings to CGM. CGM viewer plug-ins were developed as needed. There were four main tasks in this project: 1. Requirements for CGM Plug-in 2. Product Evaluation 3. Product Development Feasibility Study 4. Developing a "Plug-In" Application.

Low Temperature Metal Coating Method Final Report CRADA No. TSB-1155-95

Energy Technology Data Exchange (ETDEWEB)

Kang, Sang-Wook [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gabel, Howard [Innovative Technology, Inc., Santa Barbara, CA (United States)

2018-01-19

A new metal coating method, cidled KEM (kinetic energy metal.lization), demonstrated in the laboratory by lnovati, utilized fast-moving solid particIes entrained in a gas that are caused to fiow through a nozzIe to effect particle deposition on metal surfaces at room temperature conditions. This method (US Patent 5,795,626) was an attractive and viabIe alternative to the currentIy available high-temperature coating methods avaiIabIe. Since it differs significantly from existing metal coating technologies, a brief description of the method is incIuded here. The proposed method, KEM, achieves cohesive and adhesive metallurgical bonding through the high-speed coUision of powder with a substrate and the subsequent discharge of electrical charge at the substrate. Such coating is effected by entraining metal powder in a gas and accelerating this mixture through a supersonic nozzle. The gas/powder is directed towards the substrate to be coated. Collisions occur, initiaIly between the powder and the substrate, and, as the first Iayer of the coating forms, between the powder and the coating. During these collisions the powder is rapidly deformed, causing the exposure of fresh (oxide free) active metal surface. When these’active surfaces contact one another, they agglomerate and form true metaIIurgicaI bonds. The resultant coating has Iow porosity and high adhesive and cohesive strength. The formation of metaIIurgicaI bonds is potentiated by the discharge of electrical energy. This electrical energy is the result of triboeIectric charging of the particIes during acceleration and transit to the nozzIe. An advantage of the method is that it does not raise the temperature of the powder being appLiedor that of the substrate. Consequently, materials sensitive to high temperature may be applied without changing Me properties of the materkd or substrate.

High Performance Parallel Processing Project: Industrial computing initiative. Progress reports for fiscal year 1995

Energy Technology Data Exchange (ETDEWEB)

Koniges, A.

1996-02-09

This project is a package of 11 individual CRADA`s plus hardware. This innovative project established a three-year multi-party collaboration that is significantly accelerating the availability of commercial massively parallel processing computing software technology to U.S. government, academic, and industrial end-users. This report contains individual presentations from nine principal investigators along with overall program information.

Sigmund Freud (1856-1939) and Karl Köller (1857-1944) and the discovery of local anesthesia.

Science.gov (United States)

dos Reis, Almiro

2009-01-01

The understanding, occasionally recognized, that Sigmund Freud had the intuition to use cocaine as local anesthetic for surgical procedures, or even that he played any role in the discovery of local anesthesia is not true. The objective of Freud's studies were different, and based in irrefutable evidence, Karl Köller was the real inventor of local anesthesia. In face of those facts, proper knowledge of this historically important subject is due. This report refers to the long-known properties of cocaine. It also remembers personal data, and the professional and scientific activities of Sigmund Freud and Karl Köller. It presents Freud's researches on the pathophysiological effects of cocaine. It exposes the reasons for the harsh criticism of Freud's concepts. It describes the sudden, but conscious and justified, idea of Karl Köller to study scientifically the use of cocaine as a local anesthetic in animals and humans. It indicates how those pioneering studies, that culminated with the discovery of local anesthesia by Köller and two presentations in Vienna on the subject, were done. It also reports the first ophthalmologic surgery under local anesthesia. It shows the immediate dissemination throughout the world of the discovery that marked the beginning of regional blocks. It comments several documents corroborating the role of Köller in this discovery. And, finally, it mentions the numerous homages received by Köller in different areas of the world. COCLUSIONS: Regional block was introduced by Karl Köller in 1884, when he demonstrated the feasibility of performing painless ophthalmologic surgeries by using cocaine as a local anesthetic. Sigmund Freud studied cocaine extensively, but he did not have direct participation in this important discovery.

40 CFR 209.22 - Other discovery.

Science.gov (United States)

2010-07-01

... PRACTICE GOVERNING PROCEEDINGS UNDER THE NOISE CONTROL ACT OF 1972 Rules of Practice Governing Hearings for Orders Issued Under Section 11(d) of the Noise Control Act § 209.22 Other discovery. (a) Further... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Other discovery. 209.22 Section 209.22...

Effective Online Group Discovery in Trajectory Databases

DEFF Research Database (Denmark)

Li, Xiaohui; Ceikute, Vaida; Jensen, Christian S.

2013-01-01

GPS-enabled devices are pervasive nowadays. Finding movement patterns in trajectory data stream is gaining in importance. We propose a group discovery framework that aims to efficiently support the online discovery of moving objects that travel together. The framework adopts a sampling-independen......GPS-enabled devices are pervasive nowadays. Finding movement patterns in trajectory data stream is gaining in importance. We propose a group discovery framework that aims to efficiently support the online discovery of moving objects that travel together. The framework adopts a sampling......-independent approach that makes no assumptions about when positions are sampled, gives no special importance to sampling points, and naturally supports the use of approximate trajectories. The framework's algorithms exploit state-of-the-art, density-based clustering (DBScan) to identify groups. The groups are scored...

Arrayed antibody library technology for therapeutic biologic discovery.

Science.gov (United States)

Bentley, Cornelia A; Bazirgan, Omar A; Graziano, James J; Holmes, Evan M; Smider, Vaughn V

2013-03-15

Traditional immunization and display antibody discovery methods rely on competitive selection amongst a pool of antibodies to identify a lead. While this approach has led to many successful therapeutic antibodies, targets have been limited to proteins which are easily purified. In addition, selection driven discovery has produced a narrow range of antibody functionalities focused on high affinity antagonism. We review the current progress in developing arrayed protein libraries for screening-based, rather than selection-based, discovery. These single molecule per microtiter well libraries have been screened in multiplex formats against both purified antigens and directly against targets expressed on the cell surface. This facilitates the discovery of antibodies against therapeutically interesting targets (GPCRs, ion channels, and other multispanning membrane proteins) and epitopes that have been considered poorly accessible to conventional discovery methods. Copyright © 2013. Published by Elsevier Inc.

Radioactivity. Centenary of radioactivity discovery

International Nuclear Information System (INIS)

Charpak, G.; Tubiana, M.; Bimbot, R.

1997-01-01

This small booklet was edited for the occasion of the exhibitions of the celebration of the centenary of radioactivity discovery which took place in various locations in France from 1996 to 1998. It recalls some basic knowledge concerning radioactivity and its applications: history of discovery, atoms and isotopes, radiations, measurement of ionizing radiations, natural and artificial radioactivity, isotope dating and labelling, radiotherapy, nuclear power and reactors, fission and fusion, nuclear wastes, dosimetry, effects and radioprotection. (J.S.)

Knowledge Discovery from Vibration Measurements

Directory of Open Access Journals (Sweden)

Jun Deng

2014-01-01

Full Text Available The framework as well as the particular algorithms of pattern recognition process is widely adopted in structural health monitoring (SHM. However, as a part of the overall process of knowledge discovery from data bases (KDD, the results of pattern recognition are only changes and patterns of changes of data features. In this paper, based on the similarity between KDD and SHM and considering the particularity of SHM problems, a four-step framework of SHM is proposed which extends the final goal of SHM from detecting damages to extracting knowledge to facilitate decision making. The purposes and proper methods of each step of this framework are discussed. To demonstrate the proposed SHM framework, a specific SHM method which is composed by the second order structural parameter identification, statistical control chart analysis, and system reliability analysis is then presented. To examine the performance of this SHM method, real sensor data measured from a lab size steel bridge model structure are used. The developed four-step framework of SHM has the potential to clarify the process of SHM to facilitate the further development of SHM techniques.

A study of Multistage/Multifunction Column for Fine Coal Cleaning CRADA PC93-005, Final Report; FINAL

International Nuclear Information System (INIS)

Ralph Lai; Shiao-Hung Chiang; Daxin He; Yuru Feng

1998-01-01

The overall objective of the this research project is to explore the potential applicability of a multistage column for fine coal cleaning and other applications in fluid particle separation. The research work identifies the design parameters and their effects on the performance of the separation device. The results of this study provide an engineering data basis for further development of this technology in coal cleaning and in general areas of fluid and particle separations

On the threshold of discovery

International Nuclear Information System (INIS)

Cherenkov, P.A.

1986-01-01

The author, the discoverer of the Cherenkov radiation, recalls some interesting circumstances of his discoery 50 years ago and puts it into the context of the knowledge of the period. The discovery of Cherenkov radiation which today is in practice used especially for the detection of charged particles, was correctly understood and appreciated somewhat belatedly. At first the discovery was met with distrust and the original article announcing it was rejected by the magazine Nature. In effect, the discovery was not the result of any planned experiment but was the by-product of another research. It was, of course, allowed by previous achievements in various fields of physics, namely progress reached in the study of luminescence by S.I. Vavilov and his pupils. The discovery was made during an experimental study of luminescence induced in liquids by the β and γ radiations of uranyl salts. During his attempts to suppress the background radiation from vessel walls the autor found a ''background'' from pure solvent which differed from luminescence by being independent of the concentration, temperature and viscosity of the liquid. A closer examination of the phenomenon more or less by accident revealed its marked spatial asymmetry which had major importance for the development of the theory of the new phenomenon by I.V. Tamm and I.M. Frank. (A.K.)

Emerging Concepts and Methodologies in Cancer Biomarker Discovery.

Science.gov (United States)

Lu, Meixia; Zhang, Jinxiang; Zhang, Lanjing

2017-01-01

Cancer biomarker discovery is a critical part of cancer prevention and treatment. Despite the decades of effort, only a small number of cancer biomarkers have been identified for and validated in clinical settings. Conceptual and methodological breakthroughs may help accelerate the discovery of additional cancer biomarkers, particularly their use for diagnostics. In this review, we have attempted to review the emerging concepts in cancer biomarker discovery, including real-world evidence, open access data, and data paucity in rare or uncommon cancers. We have also summarized the recent methodological progress in cancer biomarker discovery, such as high-throughput sequencing, liquid biopsy, big data, artificial intelligence (AI), and deep learning and neural networks. Much attention has been given to the methodological details and comparison of the methodologies. Notably, these concepts and methodologies interact with each other and will likely lead to synergistic effects when carefully combined. Newer, more innovative concepts and methodologies are emerging as the current emerging ones became mainstream and widely applied to the field. Some future challenges are also discussed. This review contributes to the development of future theoretical frameworks and technologies in cancer biomarker discovery and will contribute to the discovery of more useful cancer biomarkers.

120 YEARS SINCE THE DISCOVERY OF X-RAYS.

Science.gov (United States)

Babic, Rade R; Stankovic Babic, Gordana; Babic, Strahinja R; Babic, Nevena R

2016-09-01

This paper is intended to celebrate the 120th anniversary of the discovery of X-rays. X-rays (Roentgen-rays) were discovered on the 8th ofNovember, 1895 by the German physicist Wilhelm Conrad Roentgen. Fifty days after the discovery of X-ray, on December 28, 1895. Wilhelm Conrad Roentgen published a paper about the discovery of X-rays - "On a new kind of rays" (Wilhelm Conrad Roentgen: Ober eine neue Art von Strahlen. In: Sitzungsberichte der Wurzburger Physik.-Medic.- Gesellschaft. 1895.). Therefore, the date of 28th ofDecember, 1895 was taken as the date of X-rays discovery. This paper describes the work of Wilhelm Conrad Roentgen, Nikola Tesla, Mihajlo Pupin and Maria Sklodowska-Curie about the nature of X-rays . The fantastic four - Wilhelm Conrad Roentgen, NikolaTesla, Mihajlo ldvorski Pupin and Maria Sklodowska-Curie set the foundation of radiology with their discovery and study of X-rays. Five years after the discovery of X-rays, in 1900, Dr Avram Vinaver had the first X-ray machine installed in abac, in Serbia at the time when many developed countries did not have an X-ray machine and thus set the foundation of radiology in Serbia.

On reliable discovery of molecular signatures

Directory of Open Access Journals (Sweden)

Björkegren Johan

2009-01-01

Full Text Available Abstract Background Molecular signatures are sets of genes, proteins, genetic variants or other variables that can be used as markers for a particular phenotype. Reliable signature discovery methods could yield valuable insight into cell biology and mechanisms of human disease. However, it is currently not clear how to control error rates such as the false discovery rate (FDR in signature discovery. Moreover, signatures for cancer gene expression have been shown to be unstable, that is, difficult to replicate in independent studies, casting doubts on their reliability. Results We demonstrate that with modern prediction methods, signatures that yield accurate predictions may still have a high FDR. Further, we show that even signatures with low FDR may fail to replicate in independent studies due to limited statistical power. Thus, neither stability nor predictive accuracy are relevant when FDR control is the primary goal. We therefore develop a general statistical hypothesis testing framework that for the first time provides FDR control for signature discovery. Our method is demonstrated to be correct in simulation studies. When applied to five cancer data sets, the method was able to discover molecular signatures with 5% FDR in three cases, while two data sets yielded no significant findings. Conclusion Our approach enables reliable discovery of molecular signatures from genome-wide data with current sample sizes. The statistical framework developed herein is potentially applicable to a wide range of prediction problems in bioinformatics.

Resource Discovery in Activity-Based Sensor Networks

DEFF Research Database (Denmark)

Bucur, Doina; Bardram, Jakob

This paper proposes a service discovery protocol for sensor networks that is specifically tailored for use in humancentered pervasive environments. It uses the high-level concept of computational activities (as logical bundles of data and resources) to give sensors in Activity-Based Sensor Networks...... (ABSNs) knowledge about their usage even at the network layer. ABSN redesigns classical network-level service discovery protocols to include and use this logical structuring of the network for a more practically applicable service discovery scheme. Noting that in practical settings activity-based sensor...

Discovery and Innovation

African Journals Online (AJOL)

Discovery and Innovation is a journal of the African Academy of Sciences (AAS) ... World (TWAS) meant to focus attention on science and technology in Africa and the ... of Non-wood Forest Products: Potential Impacts and Challenges in Africa ...

High Efficiency Thermionics (HET-IV) and Converter Advancement (CAP) programs. Final reports

Energy Technology Data Exchange (ETDEWEB)

Geller, C.B.; Murray, C.S.; Riley, D.R. [Bettis Atomic Power Lab., West Mifflin, PA (United States); Desplat, J.L.; Hansen, L.K.; Hatch, G.L.; McVey, J.B.; Rasor, N.S. [Rasor Associates, Inc., Sunnyvale, CA (United States)

1996-04-01

This report contains the final report of the High Efficiency Thermionics (HET-IV) Program, Attachment A, performed at Rasor Associates, Inc. (RAI); and the final report of the Converter Advancement Program (CAP), performed at the Bettis Atomic Power Laboratory, Attachment B. The phenomenology of cesium-oxygen thermionic converters was elucidated in these programs, and the factors that had prevented the achievement of stable, enhanced cesium-oxygen converter performance for the previous thirty years were identified. Based on these discoveries, cesium-oxygen vapor sources were developed that achieved stable performance with factor-of-two improvements in power density and thermal efficiency, relative to conventional, cesium-only ignited mode thermionic converters. Key achievements of the HET-IV/CAP programs are as follows: a new technique for measuring minute traces of oxygen in cesium atmospheres; the determination of the proper range of oxygen partial pressures for optimum converter performance--10{sup {minus}7} to 10{sup {minus}9} torr; the discovery, and analysis of the cesium-oxygen liquid migration and compositional segregation phenomena; the successful use of capillary forces to contain the migration phenomenon; the use of differential heating to control compositional segregation, and induce vapor circulation; the development of mechanically and chemically stable, porous reservoir structures; the development of precise, in situ oxygen charging methods; stable improvements in emitter performance, up to effective emitter bare work functions of 5.4 eV; stable improvements in barrier index, to value below 1.8 Volts; the development of detailed microscopic models for cesium-oxygen reservoir dynamics and collector work function behavior; and the discovery of new relationships between electrode geometry and Schock Instability.

Biomarkers: in medicine, drug discovery, and environmental health

National Research Council Canada - National Science Library

Vaidya, Vishal S; Bonventre, Joseph V

2010-01-01

... Identification Using Mass Spectrometry Sample Preparation Protein Quantitation Examples of Biomarker Discovery and Evaluation Challenges in Proteomic Biomarker Discovery The Road Forward: Targeted ...

Researching Complex Heat, Air and Moisture Interactions for a Wide-Range of Building Envelope Systems and Environmental Loads

Energy Technology Data Exchange (ETDEWEB)

Karagiozis, A.N.

2007-05-15

This document serves as the final report documenting work completed by Oak Ridge National Laboratory (ORNL) and the Fraunhofer Institute in Building Physics (Holzkirchen, Germany) under an international CRADA No. 0575 with Fraunhofer Institute of Bauphysics of the Federal Republic of Germany for Researching Complex Heat, Air and Moisture Interactions for a Wide Range of Building Envelope Systems and Environmental Loads. This CRADA required a multi-faceted approach to building envelope research that included a moisture engineering approach by blending extensive material property analysis, laboratory system and sub-system thermal and moisture testing, and advanced moisture analysis prediction performance. The Participant's Institute for Building physics (IBP) and the Contractor's Buildings Technology Center (BTC) identified potential research projects and activities capable of accelerating and advancing the development of innovative, low energy and durable building envelope systems in diverse climates. This allowed a major leverage of the limited resources available to ORNL to execute the required Department of Energy (DOE) directives in the area of moisture engineering. A joint working group (ORNL and Fraunhofer IBP) was assembled and a research plan was executed from May 2000 to May 2005. A number of key deliverables were produced such as adoption of North American loading into the WUFI-software. in addition the ORNL Weather File Analyzer was created and this has been used to address environmental loading for a variety of US climates. At least 4 papers have been co-written with the CRADA partners, and a chapter in the ASTM Manual 40 on Moisture Analysis and Condensation Control. All deliverables and goals were met and exceeded making this collaboration a success to all parties involves.

Multidimensional process discovery

NARCIS (Netherlands)

Ribeiro, J.T.S.

2013-01-01

Typically represented in event logs, business process data describe the execution of process events over time. Business process intelligence (BPI) techniques such as process mining can be applied to get strategic insight into business processes. Process discovery, conformance checking and

History of the discovery of uranium fission by neutrons

International Nuclear Information System (INIS)

Simane, C.

1989-01-01

The history is briefly described of the discovery of uranium fission by neutrons, based on the texts of original scientific studies, memories or biographies of those who participated in the discovery and of their contemporaries. Obstacles that stood in the way of the discovery are discussed. It is stated that only a few scientists contributed to the discovery of uranium fission. The fission process itself still remains subject of physical research which studies its detailed laws. (Z.M.). 2 tabs., 16 refs

Discovery of the calcium, indium, tin, and platinum isotopes

International Nuclear Information System (INIS)

Amos, S.; Gross, J.L.; Thoennessen, M.

2011-01-01

Currently, twenty-four calcium, thirty-eight indium, thirty-eight tin, and thirty-nine platinum isotopes have been observed and the discovery of these isotopes is discussed here. For each isotope a brief synopsis of the first refereed publication, including the production and identification method, is presented. - Highlights: Documentation of the discovery of all calcium, indium, tin and platinum isotopes. → Summary of author, journal, year, place and country of discovery for each isotope. → Brief description of discovery history of each isotope.

Orphan diseases: state of the drug discovery art.

Science.gov (United States)

Volmar, Claude-Henry; Wahlestedt, Claes; Brothers, Shaun P

2017-06-01

Since 1983 more than 300 drugs have been developed and approved for orphan diseases. However, considering the development of novel diagnosis tools, the number of rare diseases vastly outpaces therapeutic discovery. Academic centers and nonprofit institutes are now at the forefront of rare disease R&D, partnering with pharmaceutical companies when academic researchers discover novel drugs or targets for specific diseases, thus reducing the failure risk and cost for pharmaceutical companies. Considerable progress has occurred in the art of orphan drug discovery, and a symbiotic relationship now exists between pharmaceutical industry, academia, and philanthropists that provides a useful framework for orphan disease therapeutic discovery. Here, the current state-of-the-art of drug discovery for orphan diseases is reviewed. Current technological approaches and challenges for drug discovery are considered, some of which can present somewhat unique challenges and opportunities in orphan diseases, including the potential for personalized medicine, gene therapy, and phenotypic screening.

Discovery learning with SAVI approach in geometry learning

Science.gov (United States)

Sahara, R.; Mardiyana; Saputro, D. R. S.

2018-05-01

Geometry is one branch of mathematics that an important role in learning mathematics in the schools. This research aims to find out about Discovery Learning with SAVI approach to achievement of learning geometry. This research was conducted at Junior High School in Surakarta city. Research data were obtained through test and questionnaire. Furthermore, the data was analyzed by using two-way Anova. The results showed that Discovery Learning with SAVI approach gives a positive influence on mathematics learning achievement. Discovery Learning with SAVI approach provides better mathematics learning outcomes than direct learning. In addition, students with high self-efficacy categories have better mathematics learning achievement than those with moderate and low self-efficacy categories, while student with moderate self-efficacy categories are better mathematics learning achievers than students with low self-efficacy categories. There is an interaction between Discovery Learning with SAVI approach and self-efficacy toward student's mathematics learning achievement. Therefore, Discovery Learning with SAVI approach can improve mathematics learning achievement.

The Dynamic Radio Sky: An Opportunity for Discovery

Science.gov (United States)

2010-01-01

giant pulses from the Crab pulsar , a small number of dedicated radio transient surveys, and the serendipitous discovery of transient radio sources...used in the discovery of over 1800 radio pulsars . In 2003, the Parkes Multibeam Survey had covered the entire Galactic plane visible from Parkes... pulsars , and confirmed the neutron star nature of these sources, dubbed Rotating Radio Transients (RRATs). Since the discovery of the original 11 RRATs

Characterizing Listener Engagement with Popular Songs Using Large-Scale Music Discovery Data.

Science.gov (United States)

Kaneshiro, Blair; Ruan, Feng; Baker, Casey W; Berger, Jonathan

2017-01-01

Music discovery in everyday situations has been facilitated in recent years by audio content recognition services such as Shazam. The widespread use of such services has produced a wealth of user data, specifying where and when a global audience takes action to learn more about music playing around them. Here, we analyze a large collection of Shazam queries of popular songs to study the relationship between the timing of queries and corresponding musical content. Our results reveal that the distribution of queries varies over the course of a song, and that salient musical events drive an increase in queries during a song. Furthermore, we find that the distribution of queries at the time of a song's release differs from the distribution following a song's peak and subsequent decline in popularity, possibly reflecting an evolution of user intent over the "life cycle" of a song. Finally, we derive insights into the data size needed to achieve consistent query distributions for individual songs. The combined findings of this study suggest that music discovery behavior, and other facets of the human experience of music, can be studied quantitatively using large-scale industrial data.

Characterizing Listener Engagement with Popular Songs Using Large-Scale Music Discovery Data

Science.gov (United States)

Kaneshiro, Blair; Ruan, Feng; Baker, Casey W.; Berger, Jonathan

2017-01-01

Music discovery in everyday situations has been facilitated in recent years by audio content recognition services such as Shazam. The widespread use of such services has produced a wealth of user data, specifying where and when a global audience takes action to learn more about music playing around them. Here, we analyze a large collection of Shazam queries of popular songs to study the relationship between the timing of queries and corresponding musical content. Our results reveal that the distribution of queries varies over the course of a song, and that salient musical events drive an increase in queries during a song. Furthermore, we find that the distribution of queries at the time of a song's release differs from the distribution following a song's peak and subsequent decline in popularity, possibly reflecting an evolution of user intent over the “life cycle” of a song. Finally, we derive insights into the data size needed to achieve consistent query distributions for individual songs. The combined findings of this study suggest that music discovery behavior, and other facets of the human experience of music, can be studied quantitatively using large-scale industrial data. PMID:28386241

The Implementation of Discovery Learning Model with Scientific Learning Approach to Improve Students’ Critical Thinking in Learning History

Directory of Open Access Journals (Sweden)

Edi Nurcahyo

2018-03-01

Full Text Available Historical learning has not reached optimal in the learning process. It is caused by the history teachers’ learning model has not used the innovative learning models. Furthermore, it supported by the perception of students to the history subject because it does not become final exam (UN subject so it makes less improvement and builds less critical thinking in students’ daily learning. This is due to the lack of awareness of historical events and the availability of history books for students and teachers in the library are still lacking. Discovery learning with scientific approach encourages students to solve problems actively and able to improve students' critical thinking skills with scientific approach so student can build scientific thinking include observing, asking, reasoning, trying, and networking   Keywords: discovery learning, scientific, critical thinking

Discovery Mondays

CERN Multimedia

2003-01-01

Many people don't realise quite how much is going on at CERN. Would you like to gain first-hand knowledge of CERN's scientific and technological activities and their many applications? Try out some experiments for yourself, or pick the brains of the people in charge? If so, then the «Lundis Découverte» or Discovery Mondays, will be right up your street. Starting on May 5th, on every first Monday of the month you will be introduced to a different facet of the Laboratory. CERN staff, non-scientists, and members of the general public, everyone is welcome. So tell your friends and neighbours and make sure you don't miss this opportunity to satisfy your curiosity and enjoy yourself at the same time. You won't have to listen to a lecture, as the idea is to have open exchange with the expert in question and for each subject to be illustrated with experiments and demonstrations. There's no need to book, as Microcosm, CERN's interactive museum, will be open non-stop from 7.30 p.m. to 9 p.m. On the first Discovery M...

Discovery in a World of Mashups

Science.gov (United States)

King, T. A.; Ritschel, B.; Hourcle, J. A.; Moon, I. S.

2014-12-01

When the first digital information was stored electronically, discovery of what existed was through file names and the organization of the file system. With the advent of networks, digital information was shared on a wider scale, but discovery remained based on file and folder names. With a growing number of information sources, named based discovery quickly became ineffective. The keyword based search engine was one of the first types of a mashup in the world of Web 1.0. Embedded links from one document to another with prescribed relationships between files and the world of Web 2.0 was formed. Search engines like Google used the links to improve search results and a worldwide mashup was formed. While a vast improvement, the need for semantic (meaning rich) discovery was clear, especially for the discovery of scientific data. In response, every science discipline defined schemas to describe their type of data. Some core schemas where shared, but most schemas are custom tailored even though they share many common concepts. As with the networking of information sources, science increasingly relies on data from multiple disciplines. So there is a need to bring together multiple sources of semantically rich information. We explore how harvesting, conceptual mapping, facet based search engines, search term promotion, and style sheets can be combined to create the next generation of mashups in the emerging world of Web 3.0. We use NASA's Planetary Data System and NASA's Heliophysics Data Environment to illustrate how to create a multi-discipline mash-up.

Studying Scientific Discovery by Computer Simulation.

Science.gov (United States)

1983-03-30

Mendel’s laws of inheritance, the law of Gay- Lussac for gaseous reactions, tile law of Dulong and Petit, the derivation of atomic weights by Avogadro...neceseary mid identify by block number) scientific discovery -ittri sic properties physical laws extensive terms data-driven heuristics intensive...terms theory-driven heuristics conservation laws 20. ABSTRACT (Continue on revere. side It necessary and identify by block number) Scientific discovery

Fission and the discovery of isotopes

International Nuclear Information System (INIS)

Thoennessen, M.

2014-01-01

The discovery of new isotopes requires new developments in accelerator and detector technology. The new RI Beam Factory at RIKEN and the future projects FAIR at GSI and FRIB at MSU promise to expand the nuclear horizon even further. In the talk a short history of the role that fission played in the discovery of isotopes will be presented and future perspectives will be discussed

Panorama 2017 - New conventional oil and gas discoveries

International Nuclear Information System (INIS)

Hureau, Geoffroy; Vially, Roland

2017-01-01

In 2016, spending on exploration is expected to decline by approximately 35% for the second consecutive year (total exploration-production is down 24%). However, volumes discovered through conventional exploration should only fall by 25% due to several significant discoveries, particularly in Alaska and West Africa. The largest discovery in 2016 was an unconventional Permian shale basin in the United States, which could alone contain as many hydrocarbons as all of the year's conventional discoveries combined

Virtual drug discovery: beyond computational chemistry?

Science.gov (United States)

Gilardoni, Francois; Arvanites, Anthony C

2010-02-01

This editorial looks at how a fully integrated structure that performs all aspects in the drug discovery process, under one company, is slowly disappearing. The steps in the drug discovery paradigm have been slowly increasing toward virtuality or outsourcing at various phases of product development in a company's candidate pipeline. Each step in the process, such as target identification and validation and medicinal chemistry, can be managed by scientific teams within a 'virtual' company. Pharmaceutical companies to biotechnology start-ups have been quick in adopting this new research and development business strategy in order to gain flexibility, access the best technologies and technical expertise, and decrease product developmental costs. In today's financial climate, the term virtual drug discovery has an organizational meaning. It represents the next evolutionary step in outsourcing drug development.

Bioinformatics for discovery of microbiome variation

DEFF Research Database (Denmark)

Brejnrod, Asker Daniel

of various molecular methods to build hypotheses about the impact of a copper contaminated soil. The introduction is a broad introduction to the field of microbiome research with a focus on the technologies that enable these discoveries and how some of the broader issues have related to this thesis......Sequencing based tools have revolutionized microbiology in recent years. Highthroughput DNA sequencing have allowed high-resolution studies on microbial life in many different environments and at unprecedented low cost. These culture-independent methods have helped discovery of novel bacteria...... 1 ,“Large-scale benchmarking reveals false discoveries and count transformation sensitivity in 16S rRNA gene amplicon data analysis methods used in microbiome studies”, benchmarked the performance of a variety of popular statistical methods for discovering differentially abundant bacteria . between...

Final Report for completed IPP Project:"Development of Plasma Ablation for Soft Tissue and Bone Surgery"

Energy Technology Data Exchange (ETDEWEB)

Brown, Ian

2009-09-01

ArthroCare is a medical device company that develops, manufactures, and markets an advanced surgical tool, a plasma electro-surgical system for cutting and removing tissue. The hand-held electrical discharge device produces plasma in a biocompatible conductive fluid and tissue to which it is applied during surgery. Its products allow surgeons to operate with increased precision and accuracy, limiting damage to surrounding tissue thereby reducing pain and speeding recovery for the patient. In the past, the design of ArthfoCare's plasma wands has been an empirical undertaking. One goal of this R&D program was to put the phenomena involved on a sound scientific footing, allowing optimization of existing plasma based electro-surgery system technology, and the design and manufacture of new and improved kinds of scalpels, in particular for the surgical cutting of bone. Another important related goal of the program was to develop, through an experimental approach, new plasma wand approaches to the cutting ('shaving') of hard bone tissue. The goals of the CRADA were accomplished - computer models were used to predict important parameters of the plasma discharge and the bone environment, and several different approaches to bone-shaving were developed and demonstrated. The primary goal of the project was to develop and demonstrate an atmospheric-pressure plasma tool that is suitable for surgical use for shaving bone in humans. This goal was accomplished, in fact with several different alternative plasma approaches. High bone ablation speeds were measured. The use of probes ('plasma wand' - the surgical tool) with moving active electrodes was also explored, and there are advantages to this method. Another important feature is that the newly-exposed bone surface have only a very thin necrosis layer; this feature was demonstrated. This CRADA has greatly advanced our understanding of bone removal by atmospheric pressure plasmas in liquid, and puts Arthro

Final Report for completed IPP Project: Development of Plasma Ablation for Soft Tissue and Bone Surgery

International Nuclear Information System (INIS)

Brown, Ian

2009-01-01

ArthroCare is a medical device company that develops, manufactures, and markets an advanced surgical tool, a plasma electro-surgical system for cutting and removing tissue. The hand-held electrical discharge device produces plasma in a biocompatible conductive fluid and tissue to which it is applied during surgery. Its products allow surgeons to operate with increased precision and accuracy, limiting damage to surrounding tissue thereby reducing pain and speeding recovery for the patient. In the past, the design of ArthfoCare's plasma wands has been an empirical undertaking. One goal of this R and D program was to put the phenomena involved on a sound scientific footing, allowing optimization of existing plasma based electro-surgery system technology, and the design and manufacture of new and improved kinds of scalpels, in particular for the surgical cutting of bone. Another important related goal of the program was to develop, through an experimental approach, new plasma wand approaches to the cutting ('shaving') of hard bone tissue. The goals of the CRADA were accomplished - computer models were used to predict important parameters of the plasma discharge and the bone environment, and several different approaches to bone-shaving were developed and demonstrated. The primary goal of the project was to develop and demonstrate an atmospheric-pressure plasma tool that is suitable for surgical use for shaving bone in humans. This goal was accomplished, in fact with several different alternative plasma approaches. High bone ablation speeds were measured. The use of probes ('plasma wand' - the surgical tool) with moving active electrodes was also explored, and there are advantages to this method. Another important feature is that the newly-exposed bone surface have only a very thin necrosis layer; this feature was demonstrated. This CRADA has greatly advanced our understanding of bone removal by atmospheric pressure plasmas in liquid, and puts ArthroCare in a good

Twentieth Anniversary of Leptin discovery and the Approval of Myalept by FDA

Directory of Open Access Journals (Sweden)

Ata Mahmoodpoor

2015-04-01

Full Text Available Leptin is a 16 kDa hormone that is mainly expressed in adipose tissues (1. The major target of leptin is hypothalamus and it suppresses food intake and energy consumption, consequently diminishing adipose deposits and body weight (2, 3. The OB gene was isolated by Friedman in 1994 (4.  Based on the suggestion of Roger Guillemin, Friedman named this new hormone "leptin" from the Greek lepto meaning thin (5, 6. Since leptin discovery, numerous studies have been conducted on its physiological effects and its function in pathological conditions. Most of studies on leptin concentrated on its metabolic actions (7, receptors (8 and further broad functions such as immunity modulation (9 and memory processing (10. Considering such a vast range of functions, it is clear that patients with lack of leptin physiologically need pharmacological interventions. At this moment, we are in the twentieth year of leptin discovery. Finally, FDA approved a drug named Myalept (metreleptin for injection on February 2014 to treat rare metabolic disease caused by leptin deficiency. Congenital generalized lipodystrophy is a disorder with partial lack of fat tissues (11. The trial for the safety and effectiveness of Myalept demonstrated decrease in HbA1c, fasting blood glucose, and triglycerides (11. Nevertheless, there are some limitations to the usage of Myalept in HIV-related lipodystrophy and some metabolic disorders (11. Moreover, it may increase the risk of lymphoma by producing anti-metreleptin antibodies neutralizing endogenous leptin. Considering these concerns, Myalept is available only through a limited profile under a Risk Evaluation and Mitigation Strategy (REMS. Myalept is contraindicated in patients with general obesity not related to congenital leptin deficiency (12. Even though, Myalept has very limited indications for use in general population, it is considered a milestone towards the discovery of novel treatments for Leptin deficiencies and disorders

Reporting Astronomical Discoveries: Past, Now, and Future

Science.gov (United States)

Yamaoka, Hitoshi; Green, Daniel W. E.; Samus, Nikolai N.; West, Richard

2015-08-01

Many new astronomical objects have been discovered over the years by amateur astronomers, and this continues to be the case. They have traditionally reported them (as have professional astronomers) to the Central Bureau for Astronomical Telegrams (CBAT), which was established in the 19th century. This procedure has worked very well throughout the 20th century, moving under the umbrella of the newly established IAU in 1920. The discoverers have been honored by the formal announcement of their discoveries in the publications of the CBAT.In recent years, some professional research groups have established other ways of announcing their discoveries of explosive objects such as novae and supernovae; some do not now report their discoveries or spectroscopic confirmations of the transients to the CBAT, including often spectroscopic reports of objects posted to the CBAT "Transient Objects Confirmation Page" -- the highly successful TOCP webpage, which assigns official positional designations to new transients posted there by approved, registered users. This leads to a delay in formal announcements of discoveries by amateur astronomers in many cases, as well as inconsistent designations being put into use by individual groups. Amateur astronomers are feeling frustrated about this situation, and they hope that the IAU will help to settle the situation.We have proposed the new IAU commission NC-52, which will treat these phenomena in a continuation of Commission 6, through the CBAT. We hope to continuously support the reporting of the discoveries by amateur astronomers, as well as professional astronomers, who all deserve and desire proper recognition. Our strategy will maintain the firm trust between the amateur and professional astronomers, which is necessary for true collaboration. The plan is for the CBAT to work with collaborators to assure that discoveries posted on the TOCP are promptly designated and announced by the CBAT, even when confirmations are made elsewhere

A DHT-Based Discovery Service for the Internet of Things

Directory of Open Access Journals (Sweden)

Federica Paganelli

2012-01-01

Full Text Available Current trends towards the Future Internet are envisaging the conception of novel services endowed with context-aware and autonomic capabilities to improve end users’ quality of life. The Internet of Things paradigm is expected to contribute towards this ambitious vision by proposing models and mechanisms enabling the creation of networks of “smart things” on a large scale. It is widely recognized that efficient mechanisms for discovering available resources and capabilities are required to realize such vision. The contribution of this work consists in a novel discovery service for the Internet of Things. The proposed solution adopts a peer-to-peer approach for guaranteeing scalability, robustness, and easy maintenance of the overall system. While most existing peer-to-peer discovery services proposed for the IoT support solely exact match queries on a single attribute (i.e., the object identifier, our solution can handle multiattribute and range queries. We defined a layered approach by distinguishing three main aspects: multiattribute indexing, range query support, peer-to-peer routing. We chose to adopt an over-DHT indexing scheme to guarantee ease of design and implementation principles. We report on the implementation of a Proof of Concept in a dangerous goods monitoring scenario, and, finally, we discuss test results for structural properties and query performance evaluation.

Discovery of accessible locations using region-based geo-social data

KAUST Repository

Wang, Yan

2018-03-17

Geo-social data plays a significant role in location discovery and recommendation. In this light, we propose and study a novel problem of discovering accessible locations in spatial networks using region-based geo-social data. Given a set Q of query regions, the top-k accessible location discovery query (k ALDQ) finds k locations that have the highest spatial-density correlations to Q. Both the spatial distances between locations and regions and the POI (point of interest) density within the regions are taken into account. We believe that this type of k ALDQ query can bring significant benefit to many applications such as travel planning, facility allocation, and urban planning. Three challenges exist in k ALDQ: (1) how to model the spatial-density correlation practically, (2) how to prune the search space effectively, and (3) how to schedule the searches from multiple query regions. To tackle the challenges and process k ALDQ effectively and efficiently, we first define a series of spatial and density metrics to model the spatial-density correlation. Then we propose a novel three-phase solution with a pair of upper and lower bounds of the spatial-density correlation and a heuristic scheduling strategy to schedule multiple query regions. Finally, we conduct extensive experiments on real and synthetic spatial data to demonstrate the performance of the developed solutions.

Frictional behavior of automotive brake materials under wet and dry conditions

Energy Technology Data Exchange (ETDEWEB)

Blau, P.J.; Martin, R.L. [Oak Ridge National Lab., TN (United States); Weintraub, M.H.; Jang, Ho; Donlon, W. [Ford Motor Co., Dearborn, MI (United States)

1996-12-15

The purpose of this effort was to develop an improved understanding of the relationship between the structure and frictional behavior of materials in the disc brake/rotor interface with a view toward improving the performance of automotive disc brakes. The three tasks involved in this Cooperative Research and Development Agreement (CRADA) were as follows: Task 1. Investigation of Brake Pads and Rotors. Characterize surface features of worn brake pads and rotors, with special attention to the transfer film which forms on them during operation. Ford to supply specimens for examination and other supporting information. Task 2. Effects of Atmosphere and Repeated Applications on Brake Material Friction. Conduct pin-on-disk friction tests at ORNL under controlled moisture levels to determine effects of relative humidity on frictional behavior of brake pad and rotor materials. Conduct limited tests on the characteristics of friction under application of repeated contacts. Task 3. Comparison of Dynamometer Tests with Laboratory Friction Tests. Compare ORNL friction data with Ford dynamometer test data to establish the degree to which the simple bench tests can be useful in helping to understand frictional behavior in full-scale brake component tests. This final report summarizes work performed under this CRADA.

NASA Reverb: Standards-Driven Earth Science Data and Service Discovery

Science.gov (United States)

Cechini, M. F.; Mitchell, A.; Pilone, D.

2011-12-01

NASA's Earth Observing System Data and Information System (EOSDIS) is a core capability in NASA's Earth Science Data Systems Program. NASA's EOS ClearingHOuse (ECHO) is a metadata catalog for the EOSDIS, providing a centralized catalog of data products and registry of related data services. Working closely with the EOSDIS community, the ECHO team identified a need to develop the next generation EOS data and service discovery tool. This development effort relied on the following principles: + Metadata Driven User Interface - Users should be presented with data and service discovery capabilities based on dynamic processing of metadata describing the targeted data. + Integrated Data & Service Discovery - Users should be able to discovery data and associated data services that facilitate their research objectives. + Leverage Common Standards - Users should be able to discover and invoke services that utilize common interface standards. Metadata plays a vital role facilitating data discovery and access. As data providers enhance their metadata, more advanced search capabilities become available enriching a user's search experience. Maturing metadata formats such as ISO 19115 provide the necessary depth of metadata that facilitates advanced data discovery capabilities. Data discovery and access is not limited to simply the retrieval of data granules, but is growing into the more complex discovery of data services. These services include, but are not limited to, services facilitating additional data discovery, subsetting, reformatting, and re-projecting. The discovery and invocation of these data services is made significantly simpler through the use of consistent and interoperable standards. By utilizing an adopted standard, developing standard-specific adapters can be utilized to communicate with multiple services implementing a specific protocol. The emergence of metadata standards such as ISO 19119 plays a similarly important role in discovery as the 19115 standard

Accounting for discovery bias in genomic prediction

Science.gov (United States)

Our objective was to evaluate an approach to mitigating discovery bias in genomic prediction. Accuracy may be improved by placing greater emphasis on regions of the genome expected to be more influential on a trait. Methods emphasizing regions result in a phenomenon known as “discovery bias” if info...

Improved accuracy of supervised CRM discovery with interpolated Markov models and cross-species comparison.

Science.gov (United States)

Kazemian, Majid; Zhu, Qiyun; Halfon, Marc S; Sinha, Saurabh

2011-12-01

Despite recent advances in experimental approaches for identifying transcriptional cis-regulatory modules (CRMs, 'enhancers'), direct empirical discovery of CRMs for all genes in all cell types and environmental conditions is likely to remain an elusive goal. Effective methods for computational CRM discovery are thus a critically needed complement to empirical approaches. However, existing computational methods that search for clusters of putative binding sites are ineffective if the relevant TFs and/or their binding specificities are unknown. Here, we provide a significantly improved method for 'motif-blind' CRM discovery that does not depend on knowledge or accurate prediction of TF-binding motifs and is effective when limited knowledge of functional CRMs is available to 'supervise' the search. We propose a new statistical method, based on 'Interpolated Markov Models', for motif-blind, genome-wide CRM discovery. It captures the statistical profile of variable length words in known CRMs of a regulatory network and finds candidate CRMs that match this profile. The method also uses orthologs of the known CRMs from closely related genomes. We perform in silico evaluation of predicted CRMs by assessing whether their neighboring genes are enriched for the expected expression patterns. This assessment uses a novel statistical test that extends the widely used Hypergeometric test of gene set enrichment to account for variability in intergenic lengths. We find that the new CRM prediction method is superior to existing methods. Finally, we experimentally validate 12 new CRM predictions by examining their regulatory activity in vivo in Drosophila; 10 of the tested CRMs were found to be functional, while 6 of the top 7 predictions showed the expected activity patterns. We make our program available as downloadable source code, and as a plugin for a genome browser installed on our servers. © The Author(s) 2011. Published by Oxford University Press.

Inseparability of science history and discovery

Directory of Open Access Journals (Sweden)

J. M. Herndon

2010-04-01

Full Text Available Science is very much a logical progression through time. Progressing along a logical path of discovery is rather like following a path through the wilderness. Occasionally the path splits, presenting a choice; the correct logical interpretation leads to further progress, the wrong choice leads to confusion. By considering deeply the relevant science history, one might begin to recognize past faltering in the logical progression of observations and ideas and, perhaps then, to discover new, more precise understanding. The following specific examples of science faltering are described from a historical perspective: (1 Composition of the Earth's inner core; (2 Giant planet internal energy production; (3 Physical impossibility of Earth-core convection and Earth-mantle convection, and; (4 Thermonuclear ignition of stars. For each example, a revised logical progression is described, leading, respectively, to: (1 Understanding the endo-Earth's composition; (2 The concept of nuclear georeactor origin of geo- and planetary magnetic fields; (3 The invalidation and replacement of plate tectonics; and, (4 Understanding the basis for the observed distribution of luminous stars in galaxies. These revised logical progressions clearly show the inseparability of science history and discovery. A different and more fundamental approach to making scientific discoveries than the frequently discussed variants of the scientific method is this: An individual ponders and through tedious efforts arranges seemingly unrelated observations into a logical sequence in the mind so that causal relationships become evident and new understanding emerges, showing the path for new observations, for new experiments, for new theoretical considerations, and for new discoveries. Science history is rich in "seemingly unrelated observations" just waiting to be logically and causally related to reveal new discoveries.

A brief history of the ''Delayed'' discovery of nuclear fission

International Nuclear Information System (INIS)

Holden, N.E.

1989-08-01

This year marks the Fiftieth Anniversary of the discovery of Nuclear Fission. In the early 1930's, the neutron was discovered, followed by the discovery of artificial radioactivity and then the use of the neutron to produce artificial radioactivity. The first experiments resulting in the fission of uranium took place in 1934. A paper which speculated on fission as an explanation was almost immediately published, yet no one took it seriously not even the author herself. Why did it take an additional five years before anyone realized what had occurred? This is an abnormally long time in a period when discoveries, particularly in nuclear physics, seemed to be almost a daily occurrence. The events which led up to the discovery are recounted, with an attempt made to put them into their historical perspective. The role played by Mendeleev's Periodic Table, the role of the natural radioactive decay chain of uranium, the discovery of protactinium, the apparent discovery of masurium (technetium) and a speculation on the reason why Irene Curie may have missed the discovery of nuclear fission will all be discussed. 43 refs

Four disruptive strategies for removing drug discovery bottlenecks.

Science.gov (United States)

Ekins, Sean; Waller, Chris L; Bradley, Mary P; Clark, Alex M; Williams, Antony J

2013-03-01

Drug discovery is shifting focus from industry to outside partners and, in the process, creating new bottlenecks. Technologies like high throughput screening (HTS) have moved to a larger number of academic and institutional laboratories in the USA, with little coordination or consideration of the outputs and creating a translational gap. Although there have been collaborative public-private partnerships in Europe to share pharmaceutical data, the USA has seemingly lagged behind and this may hold it back. Sharing precompetitive data and models may accelerate discovery across the board, while finding the best collaborators, mining social media and mobile approaches to open drug discovery should be evaluated in our efforts to remove drug discovery bottlenecks. We describe four strategies to rectify the current unsustainable situation. Copyright © 2012 Elsevier Ltd. All rights reserved.

The discovery and development of uranium in Australia

International Nuclear Information System (INIS)

Glasson, K.R.

1988-01-01

The history of the discovery of Australia's uranium deposits is reviewed. The exploration can be conveniently divided into three periods - pre-1944, when the only significant discoveries were made by prospectors in South Australia at Radium Hill and Mount Painter; 1944-1960 and post-1967. The second period saw uranium discoveries in the Northern Territory and Queensland, most of which were made by prospectors using hand-held geiger counters and rewarded by the Australian Government. Since 1967 new deposits have been found in the Northern Territory, Queensland, South Australia and Western Australia by companies using maps, airborne radiometric surveys and sophisticated equipment. The step from the discovery of Mary Kathleen by prospectors to finding Roxby Downs by a combination of geophysical methods, geological concepts and deep drilling was a very big one

Applying Hierarchical Task Analysis Method to Discovery Layer Evaluation

Directory of Open Access Journals (Sweden)

Marlen Promann

2015-03-01

Full Text Available Libraries are implementing discovery layers to offer better user experiences. While usability tests have been helpful in evaluating the success or failure of implementing discovery layers in the library context, the focus has remained on its relative interface benefits over the traditional federated search. The informal site- and context specific usability tests have offered little to test the rigor of the discovery layers against the user goals, motivations and workflow they have been designed to support. This study proposes hierarchical task analysis (HTA as an important complementary evaluation method to usability testing of discovery layers. Relevant literature is reviewed for the discovery layers and the HTA method. As no previous application of HTA to the evaluation of discovery layers was found, this paper presents the application of HTA as an expert based and workflow centered (e.g. retrieving a relevant book or a journal article method to evaluating discovery layers. Purdue University’s Primo by Ex Libris was used to map eleven use cases as HTA charts. Nielsen’s Goal Composition theory was used as an analytical framework to evaluate the goal carts from two perspectives: a users’ physical interactions (i.e. clicks, and b user’s cognitive steps (i.e. decision points for what to do next. A brief comparison of HTA and usability test findings is offered as a way of conclusion.

Relay discovery and selection for large-scale P2P streaming.

Directory of Open Access Journals (Sweden)

Chengwei Zhang

Full Text Available In peer-to-peer networks, application relays have been commonly used to provide various networking services. The service performance often improves significantly if a relay is selected appropriately based on its network location. In this paper, we studied the location-aware relay discovery and selection problem for large-scale P2P streaming networks. In these large-scale and dynamic overlays, it incurs significant communication and computation cost to discover a sufficiently large relay candidate set and further to select one relay with good performance. The network location can be measured directly or indirectly with the tradeoffs between timeliness, overhead and accuracy. Based on a measurement study and the associated error analysis, we demonstrate that indirect measurements, such as King and Internet Coordinate Systems (ICS, can only achieve a coarse estimation of peers' network location and those methods based on pure indirect measurements cannot lead to a good relay selection. We also demonstrate that there exists significant error amplification of the commonly used "best-out-of-K" selection methodology using three RTT data sets publicly available. We propose a two-phase approach to achieve efficient relay discovery and accurate relay selection. Indirect measurements are used to narrow down a small number of high-quality relay candidates and the final relay selection is refined based on direct probing. This two-phase approach enjoys an efficient implementation using the Distributed-Hash-Table (DHT. When the DHT is constructed, the node keys carry the location information and they are generated scalably using indirect measurements, such as the ICS coordinates. The relay discovery is achieved efficiently utilizing the DHT-based search. We evaluated various aspects of this DHT-based approach, including the DHT indexing procedure, key generation under peer churn and message costs.

The discovery of subatomic particles

International Nuclear Information System (INIS)

Weinberg, S.

1984-01-01

This book developed from a course for students with no prior training in mathematics of physics to learn about the achievements of 20th century physics and classical physics. It covers the discovery of fundamental particles of ordinary atoms: the electron, the proton, and the neutron. The general outline is historical and it is for readers unfamiliar with classical physics who wish to understand the ideas and experiments that make up the history of 20th century physics. Contents include: A world of particles, the discovery of the electron, the atomic scale, the nucleus, more particles

Beyond discovery: A review of the critique of the discovery view of opportunities

DEFF Research Database (Denmark)

Korsgaard, Steffen T.

This paper systematically reviews and synthesises the critique since 2000 of the discovery view's interpretation of entrepreneurial opportunities. The review shows that the framing of the debate as polarised between two oppositions, the discovery view versus the creation view, is oversimplified....... The issue of whether opportunities are discovered or created is simply one of several key issues in play in the debate. These key issues include questions concerning agency, process, and the role of subjectivity, creativity and interpretation. Propositions for future research are developed from the critique......, emphasising distributed agency, non-linear processes, opportunities as formed, and the role of creativity. However, the paper also points to unresolved issues in relation to all four propositions that require further empirical and conceptual work....

Discovery: Pile Patterns

Science.gov (United States)

de Mestre, Neville

2017-01-01

Earlier "Discovery" articles (de Mestre, 1999, 2003, 2006, 2010, 2011) considered patterns from many mathematical situations. This article presents a group of patterns used in 19th century mathematical textbooks. In the days of earlier warfare, cannon balls were stacked in various arrangements depending on the shape of the pile base…

Mass spectrometry-driven drug discovery for development of herbal medicine.

Science.gov (United States)

Zhang, Aihua; Sun, Hui; Wang, Xijun

2018-05-01

Herbal medicine (HM) has made a major contribution to the drug discovery process with regard to identifying products compounds. Currently, more attention has been focused on drug discovery from natural compounds of HM. Despite the rapid advancement of modern analytical techniques, drug discovery is still a difficult and lengthy process. Fortunately, mass spectrometry (MS) can provide us with useful structural information for drug discovery, has been recognized as a sensitive, rapid, and high-throughput technology for advancing drug discovery from HM in the post-genomic era. It is essential to develop an efficient, high-quality, high-throughput screening method integrated with an MS platform for early screening of candidate drug molecules from natural products. We have developed a new chinmedomics strategy reliant on MS that is capable of capturing the candidate molecules, facilitating their identification of novel chemical structures in the early phase; chinmedomics-guided natural product discovery based on MS may provide an effective tool that addresses challenges in early screening of effective constituents of herbs against disease. This critical review covers the use of MS with related techniques and methodologies for natural product discovery, biomarker identification, and determination of mechanisms of action. It also highlights high-throughput chinmedomics screening methods suitable for lead compound discovery illustrated by recent successes. © 2016 Wiley Periodicals, Inc.

Context-sensitive service discovery experimental prototype and evaluation

DEFF Research Database (Denmark)

Balken, Robin; Haukrogh, Jesper; L. Jensen, Jens

2007-01-01

The amount of different networks and services available to users today are increasing. This introduces the need for a way to locate and sort out irrelevant services in the process of discovering available services to a user. This paper describes and evaluates a prototype of an automated discovery...... and selection system, which locates services relevant to a user, based on his/her context and the context of the available services. The prototype includes a multi-level, hierarchical system approach and the introduction of entities called User-nodes, Super-nodes and Root-nodes. These entities separate...... the network in domains that handle the complex distributed service discovery, which is based on dynamically changing context information. In the prototype, a method for performing context-sensitive service discovery has been realised. The service discovery part utilizes UPnP, which has been expanded in order...

Nuclear fission - the unexpected discovery seventy years ago

International Nuclear Information System (INIS)

Weis, Michael

2008-01-01

Seventy years ago, on December 17, 1938, Otto Hahn, Lise Meitner, and Fritz Strassmann discovered nuclear fission. It was a serendipitous discovery resulting from the consistent pursuit, for many years, of occasionally unexpected radiochemical experimental findings. Hardly any other scientific discovery has had such direct bearing on our life, changing our view of the world. It over-threw the tenet of physics, believed to be incontestable, that the atom was indivisible. The use of nuclear power it has made possible has given rise to immense benefits, but it has also allowed mankind's most dreadful weapon so far to be developed. All this is ample reason seventy years later to recall the discovery, the discoverers and their times. It will also be shown what later generations have made of this discovery, and what economic and ecological prospects it continues to hold. (orig.)

Technology Transfer Opportunities: On-Demand Printing in Support of National Geospatial Data

Science.gov (United States)

,

1997-01-01

The U.S. Geological Survey (USGS) and the 3M Company of St. Paul, Minnesota, have entered into a cooperative research and development agreement (CRADA) to investigate maps-on-demand technology to support the production of USGS mapping products. The CRADA will potentially help the USGS to develop on-demand alternatives to lithographic maps and help 3M to develop a series of commercial instant map-printing systems.

Price discovery on the Johannesburg Stock Exchange: Examining ...

African Journals Online (AJOL)

Price discovery on the Johannesburg Stock Exchange: Examining the impact of the ... of price discovery aim to determine which market reflects new information first. ... This paper examines the FTSE/JSE Top 40 Index, the Top 40 Index Futures ...

Swift: 10 Years of Discovery

Science.gov (United States)

2014-12-01

The conference Swift: 10 years of discovery was held in Roma at La Sapienza University on Dec. 2-5 2014 to celebrate 10 years of Swift successes. Thanks to a large attendance and a lively program, it provided the opportunity to review recent advances of our knowledge of the high-energy transient Universe both from the observational and theoretical sides. When Swift was launched on November 20, 2004, its prime objective was to chase Gamma-Ray Bursts and deepen our knowledge of these cosmic explosions. And so it did, unveiling the secrets of long and short GRBs. However, its multi-wavelength instrumentation and fast scheduling capabilities made it the most versatile mission ever flown. Besides GRBs, Swift has observed, and contributed to our understanding of, an impressive variety of targets including AGNs, supernovae, pulsars, microquasars, novae, variable stars, comets, and much more. Swift is continuously discovering rare and surprising events distributed over a wide range of redshifts, out to the most distant transient objects in the Universe. Such a trove of discoveries has been addressed during the conference with sessions dedicated to each class of events. Indeed, the conference in Rome was a spectacular celebration of the Swift 10th anniversary. It included sessions on all types of transient and steady sources. Top scientists from around the world gave invited and contributed talks. There was a large poster session, sumptuous lunches, news interviews and a glorious banquet with officials attending from INAF and ASI. All the presentations, as well as several conference pictures, can be found in the conference website (http://www.brera.inaf.it/Swift10/Welcome.html). These proceedings have been collected owing to the efforts of Paolo D’Avanzo who has followed each paper from submission to final acceptance. Our warmest thanks to Paolo for all his work. The Conference has been made possible by the support from La Sapienza University as well as from the ARAP

Fateful discovery almost forgotten

CERN Multimedia

1989-01-01

"The discovery of the fission of uranium exactly half a century ago is at risk of passing unremarked because of the general ambivalence towards the consequences of this development. Can that be wise?" (4 pages)

An extended dual search space model of scientific discovery learning

NARCIS (Netherlands)

van Joolingen, Wouter; de Jong, Anthonius J.M.

1997-01-01

This article describes a theory of scientific discovery learning which is an extension of Klahr and Dunbar''s model of Scientific Discovery as Dual Search (SDDS) model. We present a model capable of describing and understanding scientific discovery learning in complex domains in terms of the SDDS

An explanation of resisted discoveries based on construal-level theory.

Science.gov (United States)

Fang, Hui

2015-02-01

New discoveries and theories are crucial for the development of science, but they are often initially resisted by the scientific community. This paper analyses resistance to scientific discoveries that supplement previous research results or conclusions with new phenomena, such as long chains in macromolecules, Alfvén waves, parity nonconservation in weak interactions and quasicrystals. Construal-level theory is used to explain that the probability of new discoveries may be underestimated because of psychological distance. Thus, the insufficiently examined scope of an accepted theory may lead to overstating the suitable scope and underestimating the probability of its undiscovered counter-examples. Therefore, psychological activity can result in people instinctively resisting new discoveries. Direct evidence can help people judge the validity of a hypothesis with rational thinking. The effects of authorities and textbooks on the resistance to discoveries are also discussed. From the results of our analysis, suggestions are provided to reduce resistance to real discoveries, which will benefit the development of science.

Introduction to fragment-based drug discovery.

Science.gov (United States)

Erlanson, Daniel A

2012-01-01

Fragment-based drug discovery (FBDD) has emerged in the past decade as a powerful tool for discovering drug leads. The approach first identifies starting points: very small molecules (fragments) that are about half the size of typical drugs. These fragments are then expanded or linked together to generate drug leads. Although the origins of the technique date back some 30 years, it was only in the mid-1990s that experimental techniques became sufficiently sensitive and rapid for the concept to be become practical. Since that time, the field has exploded: FBDD has played a role in discovery of at least 18 drugs that have entered the clinic, and practitioners of FBDD can be found throughout the world in both academia and industry. Literally dozens of reviews have been published on various aspects of FBDD or on the field as a whole, as have three books (Jahnke and Erlanson, Fragment-based approaches in drug discovery, 2006; Zartler and Shapiro, Fragment-based drug discovery: a practical approach, 2008; Kuo, Fragment based drug design: tools, practical approaches, and examples, 2011). However, this chapter will assume that the reader is approaching the field with little prior knowledge. It will introduce some of the key concepts, set the stage for the chapters to follow, and demonstrate how X-ray crystallography plays a central role in fragment identification and advancement.

From the discovery of radioactivity to the production of radioactive beams

International Nuclear Information System (INIS)

Bimbot, R.

1999-01-01

The evolution of the projectiles used to explore the nucleus influenced strongly the development of Nuclear Physics. The alpha particles from radioactivity were the projectiles mostly used up to the second world war. This period was marked by fundamental discoveries, as those of artificial radioactivity and of fission. From the 1930's to 1070, light accelerated particles (electrons, protons, deuterons, isotopes of helium) became universally used. A third period began in the 1960's with the emergence of heavy ion accelerators, the use of which led to a true revolution in the study of nuclear matter. Finally, the fourth period started in 1985 when the first secondary beams of radioactive nuclei were produced, and opened new ways in physics. (authors)

Science of the science, drug discovery and artificial neural networks.

Science.gov (United States)

Patel, Jigneshkumar

2013-03-01

Drug discovery process many times encounters complex problems, which may be difficult to solve by human intelligence. Artificial Neural Networks (ANNs) are one of the Artificial Intelligence (AI) technologies used for solving such complex problems. ANNs are widely used for primary virtual screening of compounds, quantitative structure activity relationship studies, receptor modeling, formulation development, pharmacokinetics and in all other processes involving complex mathematical modeling. Despite having such advanced technologies and enough understanding of biological systems, drug discovery is still a lengthy, expensive, difficult and inefficient process with low rate of new successful therapeutic discovery. In this paper, author has discussed the drug discovery science and ANN from very basic angle, which may be helpful to understand the application of ANN for drug discovery to improve efficiency.

Bayesian Modeling of Temporal Coherence in Videos for Entity Discovery and Summarization.

Science.gov (United States)

Mitra, Adway; Biswas, Soma; Bhattacharyya, Chiranjib

2017-03-01

A video is understood by users in terms of entities present in it. Entity Discovery is the task of building appearance model for each entity (e.g., a person), and finding all its occurrences in the video. We represent a video as a sequence of tracklets, each spanning 10-20 frames, and associated with one entity. We pose Entity Discovery as tracklet clustering, and approach it by leveraging Temporal Coherence (TC): the property that temporally neighboring tracklets are likely to be associated with the same entity. Our major contributions are the first Bayesian nonparametric models for TC at tracklet-level. We extend Chinese Restaurant Process (CRP) to TC-CRP, and further to Temporally Coherent Chinese Restaurant Franchise (TC-CRF) to jointly model entities and temporal segments using mixture components and sparse distributions. For discovering persons in TV serial videos without meta-data like scripts, these methods show considerable improvement over state-of-the-art approaches to tracklet clustering in terms of clustering accuracy, cluster purity and entity coverage. The proposed methods can perform online tracklet clustering on streaming videos unlike existing approaches, and can automatically reject false tracklets. Finally we discuss entity-driven video summarization- where temporal segments of the video are selected based on the discovered entities, to create a semantically meaningful summary.

Neutron Diffraction and Inorganic Materials Discovery

International Nuclear Information System (INIS)

Rosseinsky, M.J.

2005-01-01

Full text: The discovery of complex inorganic materials is an important academic and technological challenge because of the opportunities these systems offer for observation of new phenomena, and the questions they pose for fundamental understanding. This presentation will illustrate the key role of neutron powder diffraction in enabling the discovery of new classes of materials, and in evaluating their properties and the conditions under which they need to be processed to optimise their behaviour in devices for applications. New chemistry is illustrated by the transition metal oxide hydrides, where both structure and ionic mobility required neutron scattering characterisation. The relationship between chemistry, structure and properties will be addressed by considering the difficulties in inducing superconductivity in analogues of magnesium diboride. The role of both neutron and X-ray diffraction in evaluating the processing of microwave dielectric ceramics will be highlighted, with the discovery of new phases shown to be a useful bonus in this type of in-situ study. (author)

Socratic Questioning-Guided Discovery

Directory of Open Access Journals (Sweden)

M. Hakan Türkçapar

2012-04-01

Full Text Available “Socratic Method” is a way of teaching philosophical thinking and knowledge by asking questions which was used by antique period greek philosopher Socrates. Socrates was teaching knowledge to his followers by asking questions and the conversation between them was named “Socratic Dialogues”. In this meaning, no novel knowledge is taught to the individual but only what is formerly known is reminded and rediscovered. The form of socratic questioning which is used during the process of cognitive behavioral therapy is known as Guided Discovery. In this method it is aimed to make the client notice the piece of knowledge which he could notice but is not aware with a series of questions. Socratic method or guided discovery consists of several steps which are: Identifying the problem by listening to the client and making reflections, finding alternatives by examining and evaluating, reidentification by using the newly found information and questioning the old distorted belief and reaching to a conclusion and applying it. Question types used during these procedures are, questions for gaining information, questions revealing the meanings, questions revealing the beliefs, questions about behaviours during the similar past experiences, analyse questions and analytic synthesis questions. In order to make the patient feel understood it is important to be empathetic and summarising the problem during the interview. In this text, steps of Socratic Questioning-Guided Discovery will be reviewed with sample dialogues after eachstep. [JCBPR 2012; 1(1.000: 15-20

Image Matrix Processor for Volumetric Computations Final Report CRADA No. TSB-1148-95

Energy Technology Data Exchange (ETDEWEB)

Roberson, G. Patrick [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Browne, Jolyon [Advanced Research & Applications Corporation, Sunnyvale, CA (United States)

2018-01-22

The development of an Image Matrix Processor (IMP) was proposed that would provide an economical means to perform rapid ray-tracing processes on volume "Giga Voxel" data sets. This was a multi-phased project. The objective of the first phase of the IMP project was to evaluate the practicality of implementing a workstation-based Image Matrix Processor for use in volumetric reconstruction and rendering using hardware simulation techniques. Additionally, ARACOR and LLNL worked together to identify and pursue further funding sources to complete a second phase of this project.

Investigation of the fundamentals of low-energy nanosecond pulse ignition: Final CRADA Report

Energy Technology Data Exchange (ETDEWEB)

Wallner, Thomas [Argonne National Lab. (ANL), Argonne, IL (United States); Scarcelli, Riccardo [Argonne National Lab. (ANL), Argonne, IL (United States); Zhang, Anqi [Argonne National Lab. (ANL), Argonne, IL (United States); Sevik, James [Argonne National Lab. (ANL), Argonne, IL (United States); Biruduganti, Munidhar [Argonne National Lab. (ANL), Argonne, IL (United States); Bihari, Bipin [Argonne National Lab. (ANL), Argonne, IL (United States); Matusik, Katarzyna E. [Argonne National Lab. (ANL), Argonne, IL (United States); Duke, Daniel J. [Argonne National Lab. (ANL), Argonne, IL (United States); Powell, Christopher F. [Argonne National Lab. (ANL), Argonne, IL (United States); Kastengren, Alan L. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-01-01

A detailed investigation of the fundamentals of low-energy nanosecond pulse ignition was performed with the objective to overcome the barrier presented by limited knowledge and characterization of nonequilibrium plasma ignition for realistic internal combustion engine applications (be it in the automotive or power generation field) and shed light on the mechanisms which improve the performance of the advanced TPS ignition system compared to conventional state-of-the-art hardware. Three main tasks of the research included experimental evaluation on a single-cylinder automotive gasoline engine, experimental evaluation on a single-cylinder stationary natural gas engine and energy quantification using x-ray diagnostics.

Laser Texturing of Magnetic Recording Media Final Report CRADA No. TSV-1298-96

Energy Technology Data Exchange (ETDEWEB)

Hackel, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Marshall, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-10-16

The Commercial Laser Systems Group at LLNL developed a concept for patterning of computer magnetic recording discs. Magnetic recording media require texturing over areas designated for contact in order to minimize friction with data transducing heads. In fabricating a hard disk, an aluminum nickel-phosphorous substrate was polished to a specular finish then a mechanical means was used to roughen an annular area intended to be the head contact band. In a previous patent (US Patent 5,062,021) it was proposed that the focused output of a low power laser with short pulse length could be used to generate the textured pattern. However, the patterned area typically required 75,000 textured spots that needed to be rapidly (less than 10 seconds) printed with good uniformity. A means to achieve the accurate placement and uniform profile, as well as a meaningfully rapid process time, was not discussed in the referenced patent. The LLNL team devised a system that could rapidly and inexpensively accomplish the texturing.

Evaluation of Aerogel Clad Optical Fibers Final Report CRADA No. TSB-1448-97

Energy Technology Data Exchange (ETDEWEB)

Maitland, Duncan [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Droege, M. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2018-01-22

Fiber-optic based sensors will be needed for in situ monitoring of degradation products in various components of nuclear weapons. These sensors typically consist of a transducer located at the measurement site whose optical properties are modulated by interaction with the targeted degradation product. The interrogating light source and the detector for determining sensor response are located remotely. These two subsystems are connected by fiber optic cables. LLNL has developed a new technology, aerogel clad optical fibers, that have the advantage of accepting incident rays over a much wider angular range than normal glass clad fibers. These fibers are also capable of transmitting light more efficiently. These advantages can lead to a factor of 2-4 improvement in sensitivity and detection limit.

Genomics-Based Discovery of Plant Genes for Synthetic Biology of Terpenoid Fragrances: A Case Study in Sandalwood oil Biosynthesis.

Science.gov (United States)

Celedon, J M; Bohlmann, J

2016-01-01

Terpenoid fragrances are powerful mediators of ecological interactions in nature and have a long history of traditional and modern industrial applications. Plants produce a great diversity of fragrant terpenoid metabolites, which make them a superb source of biosynthetic genes and enzymes. Advances in fragrance gene discovery have enabled new approaches in synthetic biology of high-value speciality molecules toward applications in the fragrance and flavor, food and beverage, cosmetics, and other industries. Rapid developments in transcriptome and genome sequencing of nonmodel plant species have accelerated the discovery of fragrance biosynthetic pathways. In parallel, advances in metabolic engineering of microbial and plant systems have established platforms for synthetic biology applications of some of the thousands of plant genes that underlie fragrance diversity. While many fragrance molecules (eg, simple monoterpenes) are abundant in readily renewable plant materials, some highly valuable fragrant terpenoids (eg, santalols, ambroxides) are rare in nature and interesting targets for synthetic biology. As a representative example for genomics/transcriptomics enabled gene and enzyme discovery, we describe a strategy used successfully for elucidation of a complete fragrance biosynthetic pathway in sandalwood (Santalum album) and its reconstruction in yeast (Saccharomyces cerevisiae). We address questions related to the discovery of specific genes within large gene families and recovery of rare gene transcripts that are selectively expressed in recalcitrant tissues. To substantiate the validity of the approaches, we describe the combination of methods used in the gene and enzyme discovery of a cytochrome P450 in the fragrant heartwood of tropical sandalwood, responsible for the fragrance defining, final step in the biosynthesis of (Z)-santalols. © 2016 Elsevier Inc. All rights reserved.

Discovery of novel bacterial toxins by genomics and computational biology.

Science.gov (United States)

Doxey, Andrew C; Mansfield, Michael J; Montecucco, Cesare

2018-06-01

Hundreds and hundreds of bacterial protein toxins are presently known. Traditionally, toxin identification begins with pathological studies of bacterial infectious disease. Following identification and cultivation of a bacterial pathogen, the protein toxin is purified from the culture medium and its pathogenic activity is studied using the methods of biochemistry and structural biology, cell biology, tissue and organ biology, and appropriate animal models, supplemented by bioimaging techniques. The ongoing and explosive development of high-throughput DNA sequencing and bioinformatic approaches have set in motion a revolution in many fields of biology, including microbiology. One consequence is that genes encoding novel bacterial toxins can be identified by bioinformatic and computational methods based on previous knowledge accumulated from studies of the biology and pathology of thousands of known bacterial protein toxins. Starting from the paradigmatic cases of diphtheria toxin, tetanus and botulinum neurotoxins, this review discusses traditional experimental approaches as well as bioinformatics and genomics-driven approaches that facilitate the discovery of novel bacterial toxins. We discuss recent work on the identification of novel botulinum-like toxins from genera such as Weissella, Chryseobacterium, and Enteroccocus, and the implications of these computationally identified toxins in the field. Finally, we discuss the promise of metagenomics in the discovery of novel toxins and their ecological niches, and present data suggesting the existence of uncharacterized, botulinum-like toxin genes in insect gut metagenomes. Copyright © 2018. Published by Elsevier Ltd.

19 CFR 210.61 - Discovery and compulsory process.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false Discovery and compulsory process. 210.61 Section 210.61 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE ADJUDICATION AND ENFORCEMENT Temporary Relief § 210.61 Discovery and compulsory...

19 CFR 210.27 - General provisions governing discovery.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 3 2010-04-01 2010-04-01 false General provisions governing discovery. 210.27 Section 210.27 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE ADJUDICATION AND ENFORCEMENT Discovery and Compulsory Process § 210.27 General...

Use of combinatorial chemistry to speed drug discovery.

Science.gov (United States)

Rádl, S

1998-10-01

IBC's International Conference on Integrating Combinatorial Chemistry into the Discovery Pipeline was held September 14-15, 1998. The program started with a pre-conference workshop on High-Throughput Compound Characterization and Purification. The agenda of the main conference was divided into sessions of Synthesis, Automation and Unique Chemistries; Integrating Combinatorial Chemistry, Medicinal Chemistry and Screening; Combinatorial Chemistry Applications for Drug Discovery; and Information and Data Management. This meeting was an excellent opportunity to see how big pharma, biotech and service companies are addressing the current bottlenecks in combinatorial chemistry to speed drug discovery. (c) 1998 Prous Science. All rights reserved.

Rough – Granular Computing knowledge discovery models

Directory of Open Access Journals (Sweden)

Mohammed M. Eissa

2016-11-01

Full Text Available Medical domain has become one of the most important areas of research in order to richness huge amounts of medical information about the symptoms of diseases and how to distinguish between them to diagnose it correctly. Knowledge discovery models play vital role in refinement and mining of medical indicators to help medical experts to settle treatment decisions. This paper introduces four hybrid Rough – Granular Computing knowledge discovery models based on Rough Sets Theory, Artificial Neural Networks, Genetic Algorithm and Rough Mereology Theory. A comparative analysis of various knowledge discovery models that use different knowledge discovery techniques for data pre-processing, reduction, and data mining supports medical experts to extract the main medical indicators, to reduce the misdiagnosis rates and to improve decision-making for medical diagnosis and treatment. The proposed models utilized two medical datasets: Coronary Heart Disease dataset and Hepatitis C Virus dataset. The main purpose of this paper was to explore and evaluate the proposed models based on Granular Computing methodology for knowledge extraction according to different evaluation criteria for classification of medical datasets. Another purpose is to make enhancement in the frame of KDD processes for supervised learning using Granular Computing methodology.

Roentgen and the discovery of X rays

International Nuclear Information System (INIS)

Gueret, Ph.

1998-01-01

In 1901, the first Nobel price of physics was attributed to Roentgen for his discovery of X rays. This paper recalls through the career of this physicist and research worker, the different steps that led him to this discovery. This paper tries also to solve the 'Roentgen mystery', i.e. the reasons that led him to stop his research work just after this exploit. (J.S.)

Privacy and User Experience in 21st Century Library Discovery

Directory of Open Access Journals (Sweden)

Shayna Pekala

2017-06-01

Full Text Available Over the last decade, libraries have taken advantage of emerging technologies to provide new discovery tools to help users find information and resources more efficiently. In the wake of this technological shift in discovery, privacy has become an increasingly prominent and complex issue for libraries. The nature of the web, over which users interact with discovery tools, has substantially diminished the library’s ability to control patron privacy. The emergence of a data economy has led to a new wave of online tracking and surveillance, in which multiple third parties collect and share user data during the discovery process, making it much more difficult, if not impossible, for libraries to protect patron privacy. In addition, users are increasingly starting their searches with web search engines, diminishing the library’s control over privacy even further. While libraries have a legal and ethical responsibility to protect patron privacy, they are simultaneously challenged to meet evolving user needs for discovery. In a world where “search” is synonymous with Google, users increasingly expect their library discovery experience to mimic their experience using web search engines. However, web search engines rely on a drastically different set of privacy standards, as they strive to create tailored, personalized search results based on user data. Libraries are seemingly forced to make a choice between delivering the discovery experience users expect and protecting user privacy. This paper explores the competing interests of privacy and user experience, and proposes possible strategies to address them in the future design of library discovery tools.

Usability Test Results for a Discovery Tool in an Academic Library

Directory of Open Access Journals (Sweden)

Jody Condit Fagan

2008-03-01

Full Text Available Discovery tools are emerging in libraries. These tools offer library patrons the ability to concurrently search the library catalog and journal articles. While vendors rush to provide feature-rich interfaces and access to as much content as possible, librarians wonder about the usefulness of these tools to library patrons. In order to learn about both the utility and usability of EBSCO Discovery Service, James Madison University conducted a usability test with eight students and two faculty members. The test consisted of nine tasks focused on common patron requests or related to the utility of specific discovery tool features. Software recorded participants’ actions and time on task, human observers judged the success of each task, and a post-survey questionnaire gathered qualitative feedback and comments from the participants.  Overall, participants were successful at most tasks, but specific usability problems suggested some interface changes for both EBSCO Discovery Service and JMU’s customizations of the tool.  The study also raised several questions for libraries above and beyond any specific discovery tool interface, including the scope and purpose of a discovery tool versus other library systems, working with the large result sets made possible by discovery tools, and navigation between the tool and other library services and resources.  This article will be of interest to those who are investigating discovery tools, selecting products, integrating discovery tools into a library web presence, or performing evaluations of similar systems.

SNPServer: a real-time SNP discovery tool.

Science.gov (United States)

Savage, David; Batley, Jacqueline; Erwin, Tim; Logan, Erica; Love, Christopher G; Lim, Geraldine A C; Mongin, Emmanuel; Barker, Gary; Spangenberg, German C; Edwards, David

2005-07-01

SNPServer is a real-time flexible tool for the discovery of SNPs (single nucleotide polymorphisms) within DNA sequence data. The program uses BLAST, to identify related sequences, and CAP3, to cluster and align these sequences. The alignments are parsed to the SNP discovery software autoSNP, a program that detects SNPs and insertion/deletion polymorphisms (indels). Alternatively, lists of related sequences or pre-assembled sequences may be entered for SNP discovery. SNPServer and autoSNP use redundancy to differentiate between candidate SNPs and sequence errors. For each candidate SNP, two measures of confidence are calculated, the redundancy of the polymorphism at a SNP locus and the co-segregation of the candidate SNP with other SNPs in the alignment. SNPServer is available at http://hornbill.cspp.latrobe.edu.au/snpdiscovery.html.

Pattern Discovery in Time-Ordered Data; TOPICAL

International Nuclear Information System (INIS)

CONRAD, GREGORY N.; BRITANIK, JOHN M.; DELAND, SHARON M.; JENKIN, CHRISTINA L.

2002-01-01

This report describes the results of a Laboratory-Directed Research and Development project on techniques for pattern discovery in discrete event time series data. In this project, we explored two different aspects of the pattern matching/discovery problem. The first aspect studied was the use of Dynamic Time Warping for pattern matching in continuous data. In essence, DTW is a technique for aligning time series along the time axis to optimize the similarity measure. The second aspect studied was techniques for discovering patterns in discrete event data. We developed a pattern discovery tool based on adaptations of the A-priori and GSP (Generalized Sequential Pattern mining) algorithms. We then used the tool on three different application areas-unattended monitoring system data from a storage magazine, computer network intrusion detection, and analysis of robot training data

DB-XES : enabling process discovery in the large

NARCIS (Netherlands)

Syamsiyah, A.; van Dongen, B.F.; van der Aalst, W.M.P.; Ceravolo, P.; Guetl, C.; Rinderle-Ma, S.

2018-01-01

Dealing with the abundance of event data is one of the main process discovery challenges. Current process discovery techniques are able to efficiently handle imported event log files that fit in the computer’s memory. Once data files get bigger, scalability quickly drops since the speed required to

Discovery simulations and the assessment of intuitive knowledge

NARCIS (Netherlands)

Swaak, Janine; de Jong, Anthonius J.M.

2001-01-01

The objective of the present work is to have a closer look at the relations between the features of discovery simulations, the learning processes elicited, the knowledge that results, and the methods used to measure this acquired knowledge. It is argued that discovery simulations are ‘rich’, have a

Mass Spectrometry-Based Biomarker Discovery.

Science.gov (United States)

Zhou, Weidong; Petricoin, Emanuel F; Longo, Caterina

2017-01-01

The discovery of candidate biomarkers within the entire proteome is one of the most important and challenging goals in proteomic research. Mass spectrometry-based proteomics is a modern and promising technology for semiquantitative and qualitative assessment of proteins, enabling protein sequencing and identification with exquisite accuracy and sensitivity. For mass spectrometry analysis, protein extractions from tissues or body fluids and subsequent protein fractionation represent an important and unavoidable step in the workflow for biomarker discovery. Following extraction of proteins, the protein mixture must be digested, reduced, alkylated, and cleaned up prior to mass spectrometry. The aim of our chapter is to provide comprehensible and practical lab procedures for sample digestion, protein fractionation, and subsequent mass spectrometry analysis.

The discovery of radioactivity and its aftermath : this article celebrates the 100th anniversary of the discovery of radioactivity by Becquerel

International Nuclear Information System (INIS)

Newbold, B.T.

1996-01-01

The year 1996 marks the 100th anniversary of the discovery of natural radioactivity by the French physicist Antoine Henri Becquerel while studying the behaviour of a fluorescent uranium salt on exposure to sunlight. The great importance of this development has been underlined by Bagnall who stated that 'The scientific scene at the dawn of the 20th century was dominated by the excitement generated from Becquerel's discovery ... ' [1]. However, the discovery of radioactivity did not attract much attention initially when compared with that accorded to the more penetrating X rays found by the German physicist Wilhelm Konrad Roentgen in 1895. Roentgen received the 1901 Nobel Prize for physics for his outstanding discovery. Fortunately, the significance of Becquerel's contribution was quickly realized and in 1903 he was also awarded the Nobel Prize for physics, which he shared with Pierre Curie and Marie Skoldowska Curie, who were honoured for their research on the radiation phenomenon reported by Becquerel. 9 refs., 1 tab

The discovery of radioactivity and its aftermath : this article celebrates the 100th anniversary of the discovery of radioactivity by Becquerel

Energy Technology Data Exchange (ETDEWEB)

Newbold, B T [Moncton Univ., NB (Canada). Dept. of Chemistry and Biochemistry

1996-09-01

The year 1996 marks the 100th anniversary of the discovery of natural radioactivity by the French physicist Antoine Henri Becquerel while studying the behaviour of a fluorescent uranium salt on exposure to sunlight. The great importance of this development has been underlined by Bagnall who stated that `The scientific scene at the dawn of the 20th century was dominated by the excitement generated from Becquerel`s discovery ... ` [1]. However, the discovery of radioactivity did not attract much attention initially when compared with that accorded to the more penetrating X rays found by the German physicist Wilhelm Konrad Roentgen in 1895. Roentgen received the 1901 Nobel Prize for physics for his outstanding discovery. Fortunately, the significance of Becquerel`s contribution was quickly realized and in 1903 he was also awarded the Nobel Prize for physics, which he shared with Pierre Curie and Marie Skoldowska Curie, who were honoured for their research on the radiation phenomenon reported by Becquerel. 9 refs., 1 tab.

The Impact of Child Sexual Abuse Discovery on Caregivers and Families: A Qualitative Study.

Science.gov (United States)

Fong, Hiu-Fai; Bennett, Colleen E; Mondestin, Valerie; Scribano, Philip V; Mollen, Cynthia; Wood, Joanne N

2017-06-01

In this qualitative study with nonoffending caregivers of suspected child sexual abuse victims, we aimed to explore the perceived impact of sexual abuse discovery on caregivers and their families, and caregivers' attitudes about mental health services for themselves. We conducted semistructured, in-person interviews with 22 nonoffending caregivers of suspected sexual abuse victims <13 years old seen at a child advocacy center in Philadelphia. Interviews were audio-recorded, transcribed, coded, and analyzed using modified grounded theory. Recruitment continued until thematic saturation was reached. We found that caregivers experienced significant emotional and psychological distress, characterized by anger, depressed mood, and guilt, after learning that their child may have been sexually abused. We identified four specific sources of caregiver distress: concerns about their child, negative beliefs about their parenting abilities, family members' actions and behaviors, and memories of their own past maltreatment experiences. Some caregivers described worsening family relationships after discovery of their child's sexual abuse, while others reported increased family cohesion. Finally, we found that most caregivers in this study believed that mental health services for themselves were necessary or beneficial to help them cope with the impact of their child's sexual abuse. These results highlight the need for professionals working with families affected by sexual abuse to assess the emotional and psychological needs of nonoffending caregivers and offer mental health services. Helping caregivers link to mental health services, tailored to their unique needs after sexual abuse discovery, may be an acceptable strategy to improve caregiver and child outcomes after sexual abuse.

The discovery of the tau lepton

International Nuclear Information System (INIS)

Perl, M.L.

1992-09-01

The discovery of the tau lepton and the third generation of fermions came from the convergence of three physics streams in the late 1960's and early 1970's. These streams were: the failed attempts by myself and others to understand the connection between the electron and the muon, the development of electron-positron storage rings, and the development of the theory of sequential leptons. In this paper I give the history of the discovery of the tau and the measurement of its major properties-the properties which established the tau as a sequential lepton

The centenary of discovery of radium

International Nuclear Information System (INIS)

Mazeron, J.-J.; Gerbaulet, A.

1998-01-01

Henri Becquerel presented the discovery of radium by Pierre and Marie Curie at the Paris Academy of Science on 26th December 1898. One century later, radium has been abandoned, mainly for radiation protection difficulties. It is, however, likely that modern techniques of brachytherapy have inherited to those designed for radium sources, and that radium has cured thousands and thousands patients all over the world for about eighty years. The history of discovery and medical use of radium is summarised. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

From the nucleus discovery to DWBA

International Nuclear Information System (INIS)

Fernandez, B.

2007-01-01

The author presents a brief review of the main events in the field of nuclear reactions that are acknowledged as milestones because of their importance due to either experimental setting or physical interpretation. It is shown that the pace of discoveries has been strongly dependent on the technical progress in detection means at the beginning of nuclear physics and now is linked to the development of simulation means. The discovery of the neutron, the development of the Geiger counter, the theory of the compound nucleus or the first direct reactions are among these milestones

Analysis of sea water by difference chromatography. Final report

Energy Technology Data Exchange (ETDEWEB)

Mangelsdorf, P.C. Jr.

1977-02-01

During the final period of this research contract the principal results obtained were: (a) the development of anion analysis by difference chromatography to the extent that SO/sub 4//sup =//Cl/sup -/ can be determined to better than 0.1 percent using an 0.5 ml seawater sample, (b) the determination of the ion-exchange cation complements of a variety of sediments in river water and in seawater, and (c) the discovery of a simple technique for the qualitative removal of NH/sub 4//sup +/ from seawater samples without altering the ratios of the other cations. This method supersedes the use of Cu-Chelex which has proved impossible to sustain.