WorldWideScience

Sample records for disassembly time scales

  1. Pilot scale, alpha disassembly and decontamination facility at the Savannah River Laboratory

    International Nuclear Information System (INIS)

    Cadieux, J.R.; Becker, G.W. Jr.; Richardson, G.W.; Coogler, A.L.

    1982-01-01

    An alpha-contained pilot facility is being built at the Savannah River Laboratory (SRL) for research into the disassembly and dcontamination of noncombustible, Transuranic (TRU) waste. The design and program objectives for the facility are presented along with the initial test results from laboratory scale decontamination experiments with Pu-238 and Cm-244

  2. Ensemble Pulsar Time Scale

    Science.gov (United States)

    Yin, Dong-shan; Gao, Yu-ping; Zhao, Shu-hong

    2017-07-01

    Millisecond pulsars can generate another type of time scale that is totally independent of the atomic time scale, because the physical mechanisms of the pulsar time scale and the atomic time scale are quite different from each other. Usually the pulsar timing observations are not evenly sampled, and the internals between two data points range from several hours to more than half a month. Further more, these data sets are sparse. All this makes it difficult to generate an ensemble pulsar time scale. Hence, a new algorithm to calculate the ensemble pulsar time scale is proposed. Firstly, a cubic spline interpolation is used to densify the data set, and make the intervals between data points uniform. Then, the Vondrak filter is employed to smooth the data set, and get rid of the high-frequency noises, and finally the weighted average method is adopted to generate the ensemble pulsar time scale. The newly released NANOGRAV (North American Nanohertz Observatory for Gravitational Waves) 9-year data set is used to generate the ensemble pulsar time scale. This data set includes the 9-year observational data of 37 millisecond pulsars observed by the 100-meter Green Bank telescope and the 305-meter Arecibo telescope. It is found that the algorithm used in this paper can reduce effectively the influence caused by the noises in pulsar timing residuals, and improve the long-term stability of the ensemble pulsar time scale. Results indicate that the long-term (> 1 yr) stability of the ensemble pulsar time scale is better than 3.4 × 10-15.

  3. Multiple time scale dynamics

    CERN Document Server

    Kuehn, Christian

    2015-01-01

    This book provides an introduction to dynamical systems with multiple time scales. The approach it takes is to provide an overview of key areas, particularly topics that are less available in the introductory form.  The broad range of topics included makes it accessible for students and researchers new to the field to gain a quick and thorough overview. The first of its kind, this book merges a wide variety of different mathematical techniques into a more unified framework. The book is highly illustrated with many examples and exercises and an extensive bibliography. The target audience of this  book are senior undergraduates, graduate students as well as researchers interested in using the multiple time scale dynamics theory in nonlinear science, either from a theoretical or a mathematical modeling perspective. 

  4. Retention of habitat complexity minimizes disassembly of reef fish communities following disturbance: a large-scale natural experiment.

    Directory of Open Access Journals (Sweden)

    Michael J Emslie

    Full Text Available High biodiversity ecosystems are commonly associated with complex habitats. Coral reefs are highly diverse ecosystems, but are under increasing pressure from numerous stressors, many of which reduce live coral cover and habitat complexity with concomitant effects on other organisms such as reef fishes. While previous studies have highlighted the importance of habitat complexity in structuring reef fish communities, they employed gradient or meta-analyses which lacked a controlled experimental design over broad spatial scales to explicitly separate the influence of live coral cover from overall habitat complexity. Here a natural experiment using a long term (20 year, spatially extensive (∼ 115,000 kms(2 dataset from the Great Barrier Reef revealed the fundamental importance of overall habitat complexity for reef fishes. Reductions of both live coral cover and habitat complexity had substantial impacts on fish communities compared to relatively minor impacts after major reductions in coral cover but not habitat complexity. Where habitat complexity was substantially reduced, species abundances broadly declined and a far greater number of fish species were locally extirpated, including economically important fishes. This resulted in decreased species richness and a loss of diversity within functional groups. Our results suggest that the retention of habitat complexity following disturbances can ameliorate the impacts of coral declines on reef fishes, so preserving their capacity to perform important functional roles essential to reef resilience. These results add to a growing body of evidence about the importance of habitat complexity for reef fishes, and represent the first large-scale examination of this question on the Great Barrier Reef.

  5. Retention of habitat complexity minimizes disassembly of reef fish communities following disturbance: a large-scale natural experiment.

    Science.gov (United States)

    Emslie, Michael J; Cheal, Alistair J; Johns, Kerryn A

    2014-01-01

    High biodiversity ecosystems are commonly associated with complex habitats. Coral reefs are highly diverse ecosystems, but are under increasing pressure from numerous stressors, many of which reduce live coral cover and habitat complexity with concomitant effects on other organisms such as reef fishes. While previous studies have highlighted the importance of habitat complexity in structuring reef fish communities, they employed gradient or meta-analyses which lacked a controlled experimental design over broad spatial scales to explicitly separate the influence of live coral cover from overall habitat complexity. Here a natural experiment using a long term (20 year), spatially extensive (∼ 115,000 kms(2)) dataset from the Great Barrier Reef revealed the fundamental importance of overall habitat complexity for reef fishes. Reductions of both live coral cover and habitat complexity had substantial impacts on fish communities compared to relatively minor impacts after major reductions in coral cover but not habitat complexity. Where habitat complexity was substantially reduced, species abundances broadly declined and a far greater number of fish species were locally extirpated, including economically important fishes. This resulted in decreased species richness and a loss of diversity within functional groups. Our results suggest that the retention of habitat complexity following disturbances can ameliorate the impacts of coral declines on reef fishes, so preserving their capacity to perform important functional roles essential to reef resilience. These results add to a growing body of evidence about the importance of habitat complexity for reef fishes, and represent the first large-scale examination of this question on the Great Barrier Reef.

  6. Disassembly and Sanitization of Classified Matter

    International Nuclear Information System (INIS)

    Stockham, Dwight J.; Saad, Max P.

    2008-01-01

    , Pantex personnel have asked the DSO team to assist them with the destruction of their stored classified components. The DSO process is in full-scale operation and continues to grow and serve SNL/NM and DOE by providing a solution to this evolving disposal issue. For some time, SNL has incurred significant expenses for the management and storage of classified components. This project is estimated to save DOE and Sandia several hundreds of thousands of dollars while the excess inventory is eliminated. This innovative approach eliminates the need for long-term storage of classified weapons components and the associated monitoring and accounting expenditures

  7. D-Amino Acids Trigger Biofilm Disassembly

    OpenAIRE

    Kolodkin-Gal, Illana; Romero, Diego; Cao, Shugeng; Clardy, Jon; Kolter, Roberto; Losick, Richard

    2010-01-01

    Bacteria form communities known as biofilms, which disassemble over time. Here we found that prior to biofilm disassembly Bacillus subtilis produced a factor that prevented biofilm formation and could break down existing biofilms. The factor was shown to be a mixture of D-leucine, D-methionine, D-tyrosine and D-tryptophan that could act at nanomolar concentrations. D-amino acid treatment caused the release of amyloid fibers that linked cells in the biofilm together. Mutants able to form biofi...

  8. AGC-2 Disassembly Report

    Energy Technology Data Exchange (ETDEWEB)

    William Windes

    2014-05-01

    The Next Generation Nuclear Plant (NGNP) Graphite Research and Development (R&D) Program is currently measuring irradiated material properties for predicting the behavior and operating performance of new nuclear graphite grades available for use within the cores of new very high temperature reactor designs. The Advanced Graphite Creep (AGC) experiment, consisting of six irradiation capsules, will generate irradiated graphite performance data for NGNP reactor operating conditions. The AGC experiment is designed to determine the changes to specific material properties such as thermal diffusivity, thermal expansion, elastic modulus, mechanical strength, irradiation induced dimensional change rate, and irradiation creep for a wide variety of nuclear grade graphite types over a range of high temperature, and moderate doses. A series of six capsules containing graphite test specimens will be used to expose graphite test samples to a dose range from 1 to 7 dpa at three different temperatures (600, 900, and 1200°C) as described in the Graphite Technology Development Plan. Since irradiation induced creep within graphite components is considered critical to determining the operational life of the graphite core, some of the samples will also be exposed to an applied load to determine the creep rate for each graphite type under both temperature and neutron flux. All six AGC capsules in the experiment will be irradiated in the Advanced Test Reactor (ATR). AGC-1 and AGC-2 will be irradiated in the south flux trap and AGC-3–AGC-6 will be irradiated in the east flux trap. The change in flux traps is due to NGNP irradiation priorities requiring the AGC experiment to be moved to accommodate Fuel irradiation experiments. After irradiation, all six AGC capsules will be cooled in the ATR Canal, sized for shipment, and shipped to the Materials and Fuels Complex (MFC) where the capsule will be disassembled in the Hot Fuel Examination Facility (HFEF). During disassembly, the metallic

  9. Dynamic inequalities on time scales

    CERN Document Server

    Agarwal, Ravi; Saker, Samir

    2014-01-01

    This is a monograph devoted to recent research and results on dynamic inequalities on time scales. The study of dynamic inequalities on time scales has been covered extensively in the literature in recent years and has now become a major sub-field in pure and applied mathematics. In particular, this book will cover recent results on integral inequalities, including Young's inequality, Jensen's inequality, Holder's inequality, Minkowski's inequality, Steffensen's inequality, Hermite-Hadamard inequality and Čebyšv's inequality. Opial type inequalities on time scales and their extensions with weighted functions, Lyapunov type inequalities, Halanay type inequalities for dynamic equations on time scales, and Wirtinger type inequalities on time scales and their extensions will also be discussed here in detail.

  10. Pair plasma relaxation time scales.

    Science.gov (United States)

    Aksenov, A G; Ruffini, R; Vereshchagin, G V

    2010-04-01

    By numerically solving the relativistic Boltzmann equations, we compute the time scale for relaxation to thermal equilibrium for an optically thick electron-positron plasma with baryon loading. We focus on the time scales of electromagnetic interactions. The collisional integrals are obtained directly from the corresponding QED matrix elements. Thermalization time scales are computed for a wide range of values of both the total-energy density (over 10 orders of magnitude) and of the baryonic loading parameter (over 6 orders of magnitude). This also allows us to study such interesting limiting cases as the almost purely electron-positron plasma or electron-proton plasma as well as intermediate cases. These results appear to be important both for laboratory experiments aimed at generating optically thick pair plasmas as well as for astrophysical models in which electron-positron pair plasmas play a relevant role.

  11. A laboratory scale fundamental time?

    International Nuclear Information System (INIS)

    Mendes, R.V.

    2012-01-01

    The existence of a fundamental time (or fundamental length) has been conjectured in many contexts. However, the ''stability of physical theories principle'' seems to be the one that provides, through the tools of algebraic deformation theory, an unambiguous derivation of the stable structures that Nature might have chosen for its algebraic framework. It is well-known that c and ℎ are the deformation parameters that stabilize the Galilean and the Poisson algebra. When the stability principle is applied to the Poincare-Heisenberg algebra, two deformation parameters emerge which define two time (or length) scales. In addition there are, for each of them, a plus or minus sign possibility in the relevant commutators. One of the deformation length scales, related to non-commutativity of momenta, is probably related to the Planck length scale but the other might be much larger and already detectable in laboratory experiments. In this paper, this is used as a working hypothesis to look for physical effects that might settle this question. Phase-space modifications, resonances, interference, electron spin resonance and non-commutative QED are considered. (orig.)

  12. A symbolic methodology to improve disassembly process design.

    Science.gov (United States)

    Rios, Pedro; Blyler, Leslie; Tieman, Lisa; Stuart, Julie Ann; Grant, Ed

    2003-12-01

    Millions of end-of-life electronic components are retired annually due to the proliferation of new models and their rapid obsolescence. The recovery of resources such as plastics from these goods requires their disassembly. The time required for each disassembly and its associated cost is defined by the operator's familiarity with the product design and its complexity. Since model proliferation serves to complicate an operator's learning curve, it is worthwhile to investigate the benefits to be gained in a disassembly operator's preplanning process. Effective disassembly process design demands the application of green engineering principles, such as those developed by Anastas and Zimmerman (Environ. Sci. Technol. 2003, 37, 94A-101A), which include regard for product complexity, structural commonality, separation energy, material value, and waste prevention. This paper introduces the concept of design symbolsto help the operator more efficiently survey product complexity with respect to location and number of fasteners to remove a structure that is common to all electronics: the housing. With a sample of 71 different computers, printers, and monitors, we demonstrate that appropriate symbols reduce the total disassembly planning time by 13.2 min. Such an improvement could well make efficient the separation of plastic that would otherwise be destined for waste-to-energy or landfill. The symbolic methodology presented may also improve Design for Recycling and Design for Maintenance and Support.

  13. Simulation-based disassembly systems design

    Science.gov (United States)

    Ohlendorf, Martin; Herrmann, Christoph; Hesselbach, Juergen

    2004-02-01

    Recycling of Waste of Electrical and Electronic Equipment (WEEE) is a matter of actual concern, driven by economic, ecological and legislative reasons. Here, disassembly as the first step of the treatment process plays a key role. To achieve sustainable progress in WEEE disassembly, the key is not to limit analysis and planning to merely disassembly processes in a narrow sense, but to consider entire disassembly plants including additional aspects such as internal logistics, storage, sorting etc. as well. In this regard, the paper presents ways of designing, dimensioning, structuring and modeling different disassembly systems. Goal is to achieve efficient and economic disassembly systems that allow recycling processes complying with legal requirements. Moreover, advantages of applying simulation software tools that are widespread and successfully utilized in conventional industry sectors are addressed. They support systematic disassembly planning by means of simulation experiments including consecutive efficiency evaluation. Consequently, anticipatory recycling planning considering various scenarios is enabled and decisions about which types of disassembly systems evidence appropriateness for specific circumstances such as product spectrum, throughput, disassembly depth etc. is supported. Furthermore, integration of simulation based disassembly planning in a holistic concept with configuration of interfaces and data utilization including cost aspects is described.

  14. Modeling operational behavior of a disassembly line

    Science.gov (United States)

    Kizilkaya, Elif A.; Gupta, Surendra M.

    2004-12-01

    In this paper we present a dynamic kanban (pull) system specifically developed for disassembly lines. This type of kanban system is much more complex than the traditional kanban system used in assembly lines. For instance, unlike the assembly line where the external demand occurs only at the last station, the demands in the disassembly case also occur at any of the intermittent stations. The reason is that as a product moves on the disassembly line, various parts are disassembled at every station and accumulated at that station. Therefore, there are as many demand sources as there are number of parts. We consider a case example involving the end-of-life products. Based on the precedence relationships and other criteria such as hazardous properties of the parts, we balance the disassembly line. The results of the disassembly line-balancing problem (DLBP) are used as input to the proposed dynamic kanban system for disassembly line (DKSDL). We compare the performance of the DKSDL to the modified kanban system for disassembly line (MKSDL), which was previously introduced by the authors. We show, via simulation, that the DKSDL is far superior to MKSDL considered.

  15. Disassembly for remanufacturing: A systematic literature review, new model development and future research needs

    International Nuclear Information System (INIS)

    Priyono, A.; Ijomah, W.; Bititci, U.

    2016-01-01

    factors affecting disassembly, and how to most appropriate relationship between original equipment manufacturers and contract remanufacturers to share knowledge gained from remanufacturing operations to improve product remanufacturability. Practical implications: Remanufacturers should not focus on product attributes only in order to manage their disassembly process efficiently. Rather, more strategic factors such organisational factors and process choices should also be considered as well. Originality/value: This is the first study that identifies a comprehensive factors affecting disassembly in remanufacturing. In addition, it is for the first time that disassembly is not only viewed as a physical activity, but it is a process that consists of a series of step.

  16. Disassembly for remanufacturing: A systematic literature review, new model development and future research needs

    Directory of Open Access Journals (Sweden)

    Anjar Priyono

    2016-11-01

    develop an index of factors affecting disassembly, and how to most appropriate relationship between original equipment manufacturers and contract remanufacturers to share knowledge gained from remanufacturing operations to improve product remanufacturability. Practical implications: Remanufacturers should not focus on product attributes only in order to manage their disassembly process efficiently. Rather, more strategic factors such organisational factors and process choices should also be considered as well. Originality/value: This is the first study that identifies a comprehensive factors affecting disassembly in remanufacturing. In addition, it is for the first time that disassembly is not only viewed as a physical activity, but it is a process that consists of a series of step.

  17. Disassembly for remanufacturing: A systematic literature review, new model development and future research needs

    Energy Technology Data Exchange (ETDEWEB)

    Priyono, A.; Ijomah, W.; Bititci, U.

    2016-07-01

    factors affecting disassembly, and how to most appropriate relationship between original equipment manufacturers and contract remanufacturers to share knowledge gained from remanufacturing operations to improve product remanufacturability. Practical implications: Remanufacturers should not focus on product attributes only in order to manage their disassembly process efficiently. Rather, more strategic factors such organisational factors and process choices should also be considered as well. Originality/value: This is the first study that identifies a comprehensive factors affecting disassembly in remanufacturing. In addition, it is for the first time that disassembly is not only viewed as a physical activity, but it is a process that consists of a series of step.

  18. A Label Correcting Algorithm for Partial Disassembly Sequences in the Production Planning for End-of-Life Products

    Directory of Open Access Journals (Sweden)

    Pei-Fang (Jennifer Tsai

    2012-01-01

    Full Text Available Remanufacturing of used products has become a strategic issue for cost-sensitive businesses. Due to the nature of uncertain supply of end-of-life (EoL products, the reverse logistic can only be sustainable with a dynamic production planning for disassembly process. This research investigates the sequencing of disassembly operations as a single-period partial disassembly optimization (SPPDO problem to minimize total disassembly cost. AND/OR graph representation is used to include all disassembly sequences of a returned product. A label correcting algorithm is proposed to find an optimal partial disassembly plan if a specific reusable subpart is retrieved from the original return. Then, a heuristic procedure that utilizes this polynomial-time algorithm is presented to solve the SPPDO problem. Numerical examples are used to demonstrate the effectiveness of this solution procedure.

  19. Estimates of expansion time scales

    International Nuclear Information System (INIS)

    Jones, E.M.

    1979-01-01

    Monte Carlo simulations of the expansion of a spacefaring civilization show that descendants of that civilization should be found near virtually every useful star in the Galaxy in a time much less than the current age of the Galaxy. Only extreme assumptions about local population growth rates, emigration rates, or ship ranges can slow or halt an expansion. The apparent absence of extraterrestrials from the solar system suggests that no such civilization has arisen in the Galaxy. 1 figure

  20. Stochastic time scale for the Universe

    International Nuclear Information System (INIS)

    Szydlowski, M.; Golda, Z.

    1986-01-01

    An intrinsic time scale is naturally defined within stochastic gradient dynamical systems. It should be interpreted as a ''relaxation time'' to a local potential minimum after the system has been randomly perturbed. It is shown that for a flat Friedman-like cosmological model this time scale is of order of the age of the Universe. 7 refs. (author)

  1. Disassembly automation automated systems with cognitive abilities

    CERN Document Server

    Vongbunyong, Supachai

    2015-01-01

    This book presents a number of aspects to be considered in the development of disassembly automation, including the mechanical system, vision system and intelligent planner. The implementation of cognitive robotics increases the flexibility and degree of autonomy of the disassembly system. Disassembly, as a step in the treatment of end-of-life products, can allow the recovery of embodied value left within disposed products, as well as the appropriate separation of potentially-hazardous components. In the end-of-life treatment industry, disassembly has largely been limited to manual labor, which is expensive in developed countries. Automation is one possible solution for economic feasibility. The target audience primarily comprises researchers and experts in the field, but the book may also be beneficial for graduate students.

  2. Time scale in quasifission reactions

    Energy Technology Data Exchange (ETDEWEB)

    Back, B.B.; Paul, P.; Nestler, J. [and others

    1995-08-01

    The quasifission process arises from the hindrance of the complete fusion process when heavy-ion beams are used. The strong dissipation in the system tends to prevent fusion and lead the system towards reseparation into two final products of similar mass reminiscent of a fission process. This dissipation slows down the mass transfer and shape transformation and allows for the emission of high energy {gamma}-rays during the process, albeit with a low probability. Giant Dipole {gamma} rays emitted during this time have a characteristic spectral shape and may thus be discerned in the presence of a background of {gamma} rays emitted from the final fission-like fragments. Since the rate of GDR {gamma} emission is very well established, the strength of this component may therefore be used to measure the timescale of the quasifission process. In this experiment we studied the reaction between 368-MeV {sup 58}Ni and a {sup 165}Ho target, where deep inelastic scattering and quasifission processes are dominant. Coincidences between fission fragments (detected in four position-sensitive avalanche detectors) and high energy {gamma} rays (measured in a 10{close_quotes} x 10{close_quotes} actively shielded NaI detector) were registered. Beams were provided by the Stony Brook Superconducting Linac. The {gamma}-ray spectrum associated with deep inelastic scattering events is well reproduced by statistical cooling of projectile and target-like fragments with close to equal initial excitation energy sharing. The y spectrum associated with quasifission events is well described by statistical emission from the fission fragments alone, with only weak evidence for GDR emission from the mono-nucleus. A 1{sigma} limit of t{sub ss} < 11 x 10{sup -21} s is obtained for the mono-nucleus lifetime, which is consistent with the lifetime obtained from quasifission fragment angular distributions. A manuscript was accepted for publication.

  3. Multiple time scale methods in tokamak magnetohydrodynamics

    Energy Technology Data Exchange (ETDEWEB)

    Jardin, S.C.

    1984-01-01

    Several methods are discussed for integrating the magnetohydrodynamic (MHD) equations in tokamak systems on other than the fastest time scale. The dynamical grid method for simulating ideal MHD instabilities utilizes a natural nonorthogonal time-dependent coordinate transformation based on the magnetic field lines. The coordinate transformation is chosen to be free of the fast time scale motion itself, and to yield a relatively simple scalar equation for the total pressure, P = p + B/sup 2//2..mu../sub 0/, which can be integrated implicitly to average over the fast time scale oscillations. Two methods are described for the resistive time scale. The zero-mass method uses a reduced set of two-fluid transport equations obtained by expanding in the inverse magnetic Reynolds number, and in the small ratio of perpendicular to parallel mobilities and thermal conductivities. The momentum equation becomes a constraint equation that forces the pressure and magnetic fields and currents to remain in force balance equilibrium as they evolve. The large mass method artificially scales up the ion mass and viscosity, thereby reducing the severe time scale disparity between wavelike and diffusionlike phenomena, but not changing the resistive time scale behavior. Other methods addressing the intermediate time scales are discussed.

  4. Disassembling iron availability to phytoplankton

    Directory of Open Access Journals (Sweden)

    Yeala eShaked

    2012-04-01

    Full Text Available The bioavailability of iron to microorganisms and its underlying mechanisms have far reaching repercussions to many natural systems and diverse fields of research, including ocean biogeochemistry, carbon cycling and climate, harmful algal blooms, soil and plant research, bioremediation, pathogenesis and medicine. Within the framework of ocean sciences, short supply and restricted bioavailability of Fe to phytoplankton is thought to limit primary production and curtail atmospheric CO2 drawdown in vast ocean regions. Yet a clear-cut definition of bioavailability remains elusive, with elements of iron speciation and kinetics, phytoplankton physiology, light, temperature and microbial interactions, to name a few, all intricately intertwined into this concept. Here, in a synthesis of published and new data, we attempt to disassemble the complex concept of iron bioavailability to phytoplankton by individually exploring some of its facets. We distinguish between the fundamentals of bioavailability - the acquisition of Fe-substrate by phytoplankton - and added levels of complexity involving interactions among organisms, iron and ecosystem processes. We first examine how phytoplankton acquire free and organically-bound iron, drawing attention to the pervasiveness of the reductive uptake pathway in both prokaryotes and eukaryotes. Turning to acquisition rates, we propose to view the availability of various Fe-substrates to phytoplankton as spectrum rather than an absolute all or nothing. We then demonstrate the use of uptake rate constants to make comparisons across different studies, organisms, Fe compounds and environments, and for gauging the contribution of various Fe substrates to phytoplankton growth in situ. Last, we describe the influence of aquatic microorganisms on iron chemistry and fate by way of organic complexation and bio-mediated redox transformations and examine the bioavailability of these bio-modified Fe species.

  5. Time Scale in Least Square Method

    Directory of Open Access Journals (Sweden)

    Özgür Yeniay

    2014-01-01

    Full Text Available Study of dynamic equations in time scale is a new area in mathematics. Time scale tries to build a bridge between real numbers and integers. Two derivatives in time scale have been introduced and called as delta and nabla derivative. Delta derivative concept is defined as forward direction, and nabla derivative concept is defined as backward direction. Within the scope of this study, we consider the method of obtaining parameters of regression equation of integer values through time scale. Therefore, we implemented least squares method according to derivative definition of time scale and obtained coefficients related to the model. Here, there exist two coefficients originating from forward and backward jump operators relevant to the same model, which are different from each other. Occurrence of such a situation is equal to total number of values of vertical deviation between regression equations and observation values of forward and backward jump operators divided by two. We also estimated coefficients for the model using ordinary least squares method. As a result, we made an introduction to least squares method on time scale. We think that time scale theory would be a new vision in least square especially when assumptions of linear regression are violated.

  6. Balancing Disassembly Line in Product Recovery to Promote the Coordinated Development of Economy and Environment

    Directory of Open Access Journals (Sweden)

    Jia Liu

    2017-02-01

    Full Text Available For environmentally conscious and sustainable manufacturing, many more manufacturers are acting to recycle and remanufacture their post-consumed products. The most critical process of remanufacturing is disassembly, since it allows for the selective extraction of the valuable components and materials from returned products to reduce the waste disposal volume. It is, therefore, important to design and balance the disassembly line to work efficiently due to its vital role in effective resource usage and environmental protection. Considering the disassembly precedence relationships and sequence-dependent parts removal time increments, this paper presents an improved discrete artificial bee colony algorithm (DABC for solving the sequence-dependent disassembly line balancing problem (SDDLBP. The performance of the proposed algorithm was tested against nine other approaches. Computational results evidently indicate the superior efficiency of the proposed algorithm for addressing the environmental and economic concerns while optimizing the multi-objective SDDLBP.

  7. Steffensen's Integral Inequality on Time Scales

    Directory of Open Access Journals (Sweden)

    Ozkan Umut Mutlu

    2007-01-01

    Full Text Available We establish generalizations of Steffensen's integral inequality on time scales via the diamond- dynamic integral, which is defined as a linear combination of the delta and nabla integrals.

  8. Hardy type inequalities on time scales

    CERN Document Server

    Agarwal, Ravi P; Saker, Samir H

    2016-01-01

    The book is devoted to dynamic inequalities of Hardy type and extensions and generalizations via convexity on a time scale T. In particular, the book contains the time scale versions of classical Hardy type inequalities, Hardy and Littlewood type inequalities, Hardy-Knopp type inequalities via convexity, Copson type inequalities, Copson-Beesack type inequalities, Liendeler type inequalities, Levinson type inequalities and Pachpatte type inequalities, Bennett type inequalities, Chan type inequalities, and Hardy type inequalities with two different weight functions. These dynamic inequalities contain the classical continuous and discrete inequalities as special cases when T = R and T = N and can be extended to different types of inequalities on different time scales such as T = hN, h > 0, T = qN for q > 1, etc.In this book the authors followed the history and development of these inequalities. Each section in self-contained and one can see the relationship between the time scale versions of the inequalities and...

  9. JY1 time scale: a new Kalman-filter time scale designed at NIST

    International Nuclear Information System (INIS)

    Yao, Jian; Parker, Thomas E; Levine, Judah

    2017-01-01

    We report on a new Kalman-filter hydrogen-maser time scale (i.e. JY1 time scale) designed at the National Institute of Standards and Technology (NIST). The JY1 time scale is composed of a few hydrogen masers and a commercial Cs clock. The Cs clock is used as a reference clock to ease operations with existing data. Unlike other time scales, the JY1 time scale uses three basic time-scale equations, instead of only one equation. Also, this time scale can detect a clock error (i.e. time error, frequency error, or frequency drift error) automatically. These features make the JY1 time scale stiff and less likely to be affected by an abnormal clock. Tests show that the JY1 time scale deviates from the UTC by less than  ±5 ns for ∼100 d, when the time scale is initially aligned to the UTC and then is completely free running. Once the time scale is steered to a Cs fountain, it can maintain the time with little error even if the Cs fountain stops working for tens of days. This can be helpful when we do not have a continuously operated fountain or when the continuously operated fountain accidentally stops, or when optical clocks run occasionally. (paper)

  10. Some nonlinear dynamic inequalities on time scales

    Indian Academy of Sciences (India)

    unify and extend some inequalities by Pachpatte in [13]. This paper is organized as follows: In §2 we give some preliminary results with respect to the calculus on time scales, which can also be found in [4, 5]. In §3 we deal with our nonlinear dynamic inequalities on time scales. In §4 we give an example to illustrate our main ...

  11. Programmable, isothermal disassembly of DNA-linked colloidal particles

    Science.gov (United States)

    Tison, Christopher Kirby

    Colloidal particles serve as useful building blocks for materials applications ranging from controlled hand-gap materials to rationally designed drug delivery systems. Thus, developing approaches to direct the assembly and disassembly of sub-micron sized particles will be paramount to further advances in materials science engineering. This project focuses on using programmable and reversible binding between oligonucleotide strands to assemble and then disassemble polystyrene colloidal particles. It is shown that DNA-mediated assembly can be reversed at a fixed temperature using secondary oligonucleotide strands to competitively displace the primary strands linking particles together. It was found that (1) titrating the surface density of hybridizing probe strands and (2) adjusting the base length difference between primary and secondary target strands was key to successful isothermal disassembly. In order to titrate the surface density of primary probe-target duplexes, colloidal particles were conjugated with mixtures of probe strands and "diluent" strands in order to minimize the number of DNA linkages between particles. To reduce the steric interference of the diluent strands to hybridization events, diluent strands were clipped with a restriction enzyme in select cases. Kinetics studies revealed that a four to six base-length difference between primary and secondary target strands resulted in extensive competitive hybridization at secondary oligonucleotide concentrations as low as 10 nM. Importantly, it was found that the timing for release of either DNA alone or DNA-conjugated nanoparticles could be tuned through choices in the DNA sequences and concentration. Lastly, competitive hybridization was explored in select studies to drive the "shedding" of PEGylated DNA targets from microspheres to reveal underlying adhesive groups or ligands on the particle surface. Unlike prior work relying on elevated temperatures to melt DNA-linkages, this work presents an

  12. Nuclear fuel bundle disassembly and assembly tool

    International Nuclear Information System (INIS)

    Yates, J.; Long, J.W.

    1975-01-01

    A nuclear power reactor fuel bundle is described which has a plurality of tubular fuel rods disposed in parallel array between two transverse tie plates. It is secured against disassembly by one or more locking forks which engage slots in tie rods which position the transverse plates. Springs mounted on the fuel and tie rods are compressed when the bundle is assembled thereby maintaining a continual pressure against the locking forks. Force applied in opposition to the springs permits withdrawal of the locking forks so that one tie plate may be removed, giving access to the fuel rods. An assembly and disassembly tool facilitates removal of the locking forks when the bundle is to be disassembled and the placing of the forks during assembly of the bundle. (U.S.)

  13. Illustrating the disassembly of 3D models

    KAUST Repository

    Guo, Jianwei

    2013-06-11

    We present a framework for the automatic disassembly of 3D man-made models and the illustration of the disassembly process. Given an assembled 3D model, we first analyze the individual parts using sharp edge loops and extract the contact faces between each pair of neighboring parts. The contact faces are then used to compute the possible moving directions of each part. We then present a simple algorithm for clustering the sets of the individual parts into meaningful sub-assemblies, which can be used for a hierarchical decomposition. We take the stability of sub-assemblies into account during the decomposition process by considering the upright orientation of the input models. Our framework also provides a user-friendly interface to enable the superimposition of the constraints for the decomposition. Finally, we visualize the disassembly process by generating an animated sequence. The experiments demonstrate that our framework works well for a variety of complex models. © 2013 Elsevier Ltd.

  14. On the optimal design of the disassembly and recovery processes.

    Science.gov (United States)

    Xanthopoulos, A; Iakovou, E

    2009-05-01

    This paper tackles the problem of the optimal design of the recovery processes of the end-of-life (EOL) electric and electronic products, with a special focus on the disassembly issues. The objective is to recover as much ecological and economic value as possible, and to reduce the overall produced quantities of waste. In this context, a medium-range tactical problem is defined and a novel two-phased algorithm is presented for a remanufacturing-driven reverse supply chain. In the first phase, we propose a multicriteria/goal-programming analysis for the identification and the optimal selection of the most 'desirable' subassemblies and components to be disassembled for recovery, from a set of different types of EOL products. In the second phase, a multi-product, multi-period mixed-integer linear programming (MILP) model is presented, which addresses the optimization of the recovery processes, while taking into account explicitly the lead times of the disassembly and recovery processes. Moreover, a simulation-based solution approach is proposed for capturing the uncertainties in reverse logistics. The overall approach leads to an easy-to-use methodology that could support effectively middle level management decisions. Finally, the applicability of the developed methodology is illustrated by its application on a specific case study.

  15. On the optimal design of the disassembly and recovery processes

    International Nuclear Information System (INIS)

    Xanthopoulos, A.; Iakovou, E.

    2009-01-01

    This paper tackles the problem of the optimal design of the recovery processes of the end-of-life (EOL) electric and electronic products, with a special focus on the disassembly issues. The objective is to recover as much ecological and economic value as possible, and to reduce the overall produced quantities of waste. In this context, a medium-range tactical problem is defined and a novel two-phased algorithm is presented for a remanufacturing-driven reverse supply chain. In the first phase, we propose a multicriteria/goal-programming analysis for the identification and the optimal selection of the most 'desirable' subassemblies and components to be disassembled for recovery, from a set of different types of EOL products. In the second phase, a multi-product, multi-period mixed-integer linear programming (MILP) model is presented, which addresses the optimization of the recovery processes, while taking into account explicitly the lead times of the disassembly and recovery processes. Moreover, a simulation-based solution approach is proposed for capturing the uncertainties in reverse logistics. The overall approach leads to an easy-to-use methodology that could support effectively middle level management decisions. Finally, the applicability of the developed methodology is illustrated by its application on a specific case study

  16. The effect of sudden server breakdown on the performance of a disassembly line

    Science.gov (United States)

    Udomsawat, Gun; Gupta, Surendra M.

    2005-11-01

    Product and material recovery relies on the disassembly process to separate target components or materials from the end-of-life (EOL) products. Disassembly line is especially effective when products in large quantity are disassembled. Unlike an assembly line, a disassembly line is more complex and is subjected to numerous uncertainties including stochastic and multi-level arrivals of component demands, stochastic arrival times for EOL products, and process interruption due to equipment failure. These factors seriously impair the control mechanism in the disassembly line. A common production control mechanism is the traditional push system (TPS). TPS responds to the aforementioned complications by carrying substantial amounts of inventories. An alternative control mechanism is a newly developed multi-kanban pull system (MKS) that relies on dynamic routing of kanbans, which tends to minimize the system's inventories while maintaining demand serviceability. In this paper we explore the impact of sudden breakdown of server on the performance of a disassembly line. We compare the overall performances of the TPS and MKS by considering two scenarios. We present the solution procedure and results for these cases.

  17. Long term stability of atomic time scales

    Science.gov (United States)

    Petit, Gérard; Arias, Elisa Felicitas

    2012-08-01

    International Atomic Time TAI gets its stability from some 400 atomic clocks worldwide that generate the free atomic scale EA L and its accuracy from a small number of primary frequency standards (PFS) which frequency measurements are used to steer the EAL frequency. Because TAI is computed in "real - time" (every month) and has operational constraints, it is not optimal and the BIPM computes in deferred time another time scale TT(BIPM), which is based on a weighted average of the evaluations of TAI frequency by the PFS. We show that a point has been reached where the stability of atomic time scales, the accuracy of primary frequency standards, and the capabilities of frequency transfer are approximately at a similar level, in the low 10 - 16 in relative frequency. The goal is now to reach and surpass 1x10 - 16 and the three fields are in various stages of advancement towards this aim. We review the stability and accuracy recently achieved by frequency standards, focusing on primary frequency standards on one hand, and on new secondary realizations e.g. based on optical transitions on the other hand. We study how these performances can translate to the performance of atomic time scales, and the possible implications of the availability of new high - accuracy frequency standards operating on a regular basis. Finally we show how time transfer is trying to keep up with the progresses of frequency standards. Time transfer is presently the limiting factor at short averaging time (e.g. 1 - 2 weeks) but it should not be limiting the long term stability of atomic time scales, which is the main need of many applications in astronomy.

  18. Multi-kanban mechanism for appliance disassembly

    Science.gov (United States)

    Udomsawat, Gun; Gupta, Surendra M.

    2005-11-01

    The use of household appliances continues to rise every year. A significant number of End-Of-Life (EOL) appliances are generated because of the introduction of newer models that are more attractive, efficient and affordable. Others are, of course, generated when they become non-functional. Many regulations encourage recycling of EOL appliances to reduce the amount of waste sent to landfills. In addition, EOL appliances offer the appliance manufacturing and remanufacturing industries a source of less expensive raw materials and components. For this reason product recovery has become a subject of interest during the past decade. In this paper, we study the disassembly line for appliance disassembly. We discuss and incorporate some of the complications that are inherent in disassembly line including product arrival, demand arrival, inventory fluctuation and production control mechanisms. We show how to overcome such complications by implementing a multi-kanban system in the appliance disassembly line setting. The multi-kanban system (MKS) relies on dynamic routing of kanbans according to the state of the system. We investigate the multi-kanban mechanism using simulation and explore the effect of product mix on performance of the traditional push system (TPS) and MKS in terms of controlling the system's inventory while attempting to achieve a decent customer service level.

  19. Conformable fractional Dirac system on time scales

    Directory of Open Access Journals (Sweden)

    Tuba Gulsen

    2017-07-01

    Full Text Available Abstract We study the conformable fractional (CF Dirac system with separated boundary conditions on an arbitrary time scale T $\\mathbb{T}$ . Then we extend some basic spectral properties of the classical Dirac system to the CF case. Eventually, some asymptotic estimates for the eigenfunction of the CF Dirac eigenvalue problem are obtained on  T $\\mathbb{T} $ . So, we provide a constructive procedure for the solution of this problem. These results are important steps to consolidate the link between fractional calculus and time scale calculus in spectral theory.

  20. Multivariable dynamic calculus on time scales

    CERN Document Server

    Bohner, Martin

    2016-01-01

    This book offers the reader an overview of recent developments of multivariable dynamic calculus on time scales, taking readers beyond the traditional calculus texts. Covering topics from parameter-dependent integrals to partial differentiation on time scales, the book’s nine pedagogically oriented chapters provide a pathway to this active area of research that will appeal to students and researchers in mathematics and the physical sciences. The authors present a clear and well-organized treatment of the concept behind the mathematics and solution techniques, including many practical examples and exercises.

  1. Time scales in tidal disruption events

    Directory of Open Access Journals (Sweden)

    Krolik J.

    2012-12-01

    Full Text Available We explore the temporal structure of tidal disruption events pointing out the corresponding transitions in the lightcurves of the thermal accretion disk and of the jet emerging from such events. The hydrodynamic time scale of the disrupted star is the minimal time scale of building up the accretion disk and the jet and it sets a limit on the rise time. This suggest that Swift J1644+57, that shows several flares with a rise time as short as a few hundred seconds could not have arisen from a tidal disruption of a main sequence star whose hydrodynamic time is a few hours. The disrupted object must have been a white dwarf. A second important time scale is the Eddington time in which the accretion rate changes form super to sub Eddington. It is possible that such a transition was observed in the light curve of Swift J2058+05. If correct this provides interesting constraints on the parameters of the system.

  2. Some Nonlinear Dynamic Inequalities on Time Scales

    Indian Academy of Sciences (India)

    The aim of this paper is to investigate some nonlinear dynamic inequalities on time scales, which provide explicit bounds on unknown functions. The inequalities given here unify and extend some inequalities in (B G Pachpatte, On some new inequalities related to a certain inequality arising in the theory of differential ...

  3. Some Nonlinear Integral Inequalities on Time Scales

    Directory of Open Access Journals (Sweden)

    Li Wei Nian

    2007-01-01

    Full Text Available The purpose of this paper is to investigate some nonlinear integral inequalities on time scales. Our results unify and extend some continuous inequalities and their corresponding discrete analogues. The theoretical results are illustrated by a simple example at the end of this paper.

  4. The Second Noether Theorem on Time Scales

    Directory of Open Access Journals (Sweden)

    Agnieszka B. Malinowska

    2013-01-01

    Full Text Available We extend the second Noether theorem to variational problems on time scales. As corollaries we obtain the classical second Noether theorem, the second Noether theorem for the h-calculus and the second Noether theorem for the q-calculus.

  5. Implications of short time scale dynamics on long time processes

    Directory of Open Access Journals (Sweden)

    Krystel El Hage

    2017-11-01

    Full Text Available This review provides a comprehensive overview of the structural dynamics in topical gas- and condensed-phase systems on multiple length and time scales. Starting from vibrationally induced dissociation of small molecules in the gas phase, the question of vibrational and internal energy redistribution through conformational dynamics is further developed by considering coupled electron/proton transfer in a model peptide over many orders of magnitude. The influence of the surrounding solvent is probed for electron transfer to the solvent in hydrated I−. Next, the dynamics of a modified PDZ domain over many time scales is analyzed following activation of a photoswitch. The hydration dynamics around halogenated amino acid side chains and their structural dynamics in proteins are relevant for iodinated TyrB26 insulin. Binding of nitric oxide to myoglobin is a process for which experimental and computational analyses have converged to a common view which connects rebinding time scales and the underlying dynamics. Finally, rhodopsin is a paradigmatic system for multiple length- and time-scale processes for which experimental and computational methods provide valuable insights into the functional dynamics. The systems discussed here highlight that for a comprehensive understanding of how structure, flexibility, energetics, and dynamics contribute to functional dynamics, experimental studies in multiple wavelength regions and computational studies including quantum, classical, and more coarse grained levels are required.

  6. Early Warning Systems at Different Time Scales

    Science.gov (United States)

    Bain, C.

    2014-12-01

    Early Warning Systems (EWS) reduce the negative aspects of natural hazard impacts on vulnerable communities. Despite its frequent use as a term there is no real 'one size fits all' approach to EWS and the system may comprise of different elements depending on the time scale of the hazard, the quality of the information available to make decisions, as well as the population needs and habits. In most developing countries, the primary hydro-meteorological hazards are droughts and floods. These two hazards demand very different approaches: droughts occur over long time scales and are generally a consequence of a gradual process of reduced rainfall across a rainy season; Floods may be caused on seasonal timescales as well due to an overactive rainy season, but the most extreme consequences and loss of life are often suffered at short timescales and relate to flash flooding caused by severe thunderstorms, monsoon extremes and tropical cyclones. This presentation will address the issues around implementing successful EWS and how these can be targeted to different time scales of hazards. Case studies illustrating the benefits of early information use and action will be shown along with open questions for debate on how the science community might better engage and help develop solutions to hazard warning.

  7. Corrosion of aluminum alloys in a reactor disassembly basin

    Energy Technology Data Exchange (ETDEWEB)

    Howell, J.P.; Zapp, P.E.; Nelson, D.Z.

    1992-12-01

    This document discusses storage of aluminum clad fuel and target tubes of the Mark 22 assembly takes place in the concrete-lined, light-water-filled, disassembly basins located within each reactor area at the Savannah River Site (SRS). A corrosion test program has been conducted in the K-Reactor disassembly basin to assess the storage performance of the assemblies and other aluminum clad components in the current basin environment. Aluminum clad alloys cut from the ends of actual fuel and target tubes were originally placed in the disassembly water basin in December 1991. After time intervals varying from 45--182 days, the components were removed from the basin, photographed, and evaluated metallographically for corrosion performance. Results indicated that pitting of the 8001 aluminum fuel clad alloy exceeded the 30-mil (0.076 cm) cladding thickness within the 45-day exposure period. Pitting of the 1100 aluminum target clad alloy exceeded the 30-mil (0.076 cm) clad thickness in 107--182 days exposure. The existing basin water chemistry is within limits established during early site operations. Impurities such as Cl{sup {minus}}, NO{sub 3}{sup {minus}} and SO{sub 4}{sup {minus}} are controlled to the parts per million level and basin water conductivity is currently 170--190 {mu}mho/cm. The test program has demonstrated that the basin water is aggressive to the aluminum components at these levels. Other storage basins at SRS and around the US have successfully stored aluminum components for greater than ten years without pitting corrosion. These basins have impurity levels controlled to the parts per billion level (1000X lower) and conductivity less than 1.0 {mu}mho/cm.

  8. Shape memory polymer nanocomposites for application of multiple-field active disassembly: experiment and simulation.

    Science.gov (United States)

    Carrell, John; Zhang, Hong-Chao; Wang, Shiren; Tate, Derrick

    2013-11-19

    Active disassembly (AD) uses innovative materials that can perform a designed disassembly action by the application of an external field. AD provides improvements over current disassembly processes by limiting machine or manual labor and enabling batch processing for end-of-life products. With improved disassembly operations, more reuse of components and purer recycling streams may be seen. One problem with AD, however, has been with the single-field actuation because of the probability of accidental disassembly. This presentation will discuss the application of shape memory polymer (SMP) nanocomposites in a new AD process. This novel AD process requires multiple-field actuation of the SMP nanocomposite fastener. In the analysis of this AD process, thermal and magnetic field tests were performed on the SMP nanocomposite. From these tests, finite-element analysis was performed to model and simulate the multiple-field AD process. The results of the simulations provide performance variables for the AD process and show a better performance time for the SMP nanocomposite fastener than for a comparable SMP fastener.

  9. Movement and equipositioning of plasmids by ParA filament disassembly

    DEFF Research Database (Denmark)

    Ringgaard, Simon; van Zon, Jeroen; Howard, Martin

    2009-01-01

    Bacterial plasmids encode partitioning (par) loci that confer stable plasmid inheritance. We showed previously that, in the presence of ParB and parC encoded by the par2 locus of plasmid pB171, ParA formed cytoskeletal-like structures that dynamically relocated over the nucleoid. Simultaneously......, the par2 locus distributed plasmids regularly over the nucleoid. We show here that the dynamic ParA patterns are not simple oscillations. Rather, ParA nucleates and polymerizes in between plasmids. When a ParA assembly reaches a plasmid, the assembly reaction reverses into disassembly. Strikingly......, plasmids consistently migrate behind disassembling ParA cytoskeletal structures, suggesting that ParA filaments pull plasmids by depolymerization. The perpetual cycles of ParA assembly and disassembly result in continuous relocation of plasmids, which, on time averaging, results in equidistribution...

  10. Design and analysis of sustainable computer mouse using design for disassembly methodology

    Science.gov (United States)

    Roni Sahroni, Taufik; Fitri Sukarman, Ahmad; Agung Mahardini, Karunia

    2017-12-01

    This paper presents the design and analysis of computer mouse using Design for Disassembly methodology. Basically, the existing computer mouse model consist a number of unnecessary part that cause the assembly and disassembly time in production. The objective of this project is to design a new computer mouse based on Design for Disassembly (DFD) methodology. The main methodology of this paper was proposed from sketch generation, concept selection, and concept scoring. Based on the design screening, design concept B was selected for further analysis. New design of computer mouse is proposed using fastening system. Furthermore, three materials of ABS, Polycarbonate, and PE high density were prepared to determine the environmental impact category. Sustainable analysis was conducted using software SolidWorks. As a result, PE High Density gives the lowers amount in the environmental category with great maximum stress value.

  11. Research on automated disassembly technology for waste LCD

    Science.gov (United States)

    Qin, Qin; Zhu, Dongdong; Wang, Jingwei; Dou, Jianfang; Wang, Sujuan; Tu, Zimei

    2017-11-01

    In the field of Waste LCD disassembling and recycling, there are existing two major problems: 1) disassembling waste LCD mainly depends on manually mechanical crushing; 2) the resource level is not high. In order to deal with the above problems, in this paper, we develop an efficient, safe and automated waste LCD disassembling assembly line technology. This technology can disassembly and classify mainstream LCD into four components, which are liquid crystal display panels, housings and metal shield, PCB assembly. It can also disassembly many kinds of waste LCD. Compared with the traditional cooperation of manual labor and electric tools method, our proposed technology can significantly improve disassembling efficiency and demonstrate good prospects and promotional value.

  12. Digital mock-up for the spent fuel disassembly processes

    International Nuclear Information System (INIS)

    Lee, J. Y.; Kim, S. H.; Song, T. G.; Kim, Y. H.; Hong, D. H.; Yoon, J. S.

    2000-12-01

    In this study, the graphical design system is developed and the digital mock-up is implemented for designing the spent fuel handling and disassembly processes. The system consists of a 3D graphical modeling system, a devices assembling system, and a motion simulation system. This system is used throughout the design stages from the conceptual design to the motion analysis. By using this system, all the process involved in the spent fuel handling and disassembly processes are analyzed and optimized. Also, this system is used in developing the on-line graphic simulator which synchronously simulates the motion of the equipment in a real time basis by connecting the device controllers with the graphic server through the TCP/IP network. This simulator can be effectively used for detecting the malfunctions of the process equipment which is remotely operated. Thus, the simulator enhances the reliability and safety of the spent fuel handling process by providing the remote monitoring function of the process. The graphical design system and the digital mock-up system can be effectively used for designing the process equipment, as well as the optimized process and maintenance process. And the on-line graphic simulator can be an alternative of the conventional process monitoring system which is a hardware based system

  13. Digital mock-up for the spent fuel disassembly processes

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J. Y.; Kim, S. H.; Song, T. G.; Kim, Y. H.; Hong, D. H.; Yoon, J. S

    2000-12-01

    In this study, the graphical design system is developed and the digital mock-up is implemented for designing the spent fuel handling and disassembly processes. The system consists of a 3D graphical modeling system, a devices assembling system, and a motion simulation system. This system is used throughout the design stages from the conceptual design to the motion analysis. By using this system, all the process involved in the spent fuel handling and disassembly processes are analyzed and optimized. Also, this system is used in developing the on-line graphic simulator which synchronously simulates the motion of the equipment in a real time basis by connecting the device controllers with the graphic server through the TCP/IP network. This simulator can be effectively used for detecting the malfunctions of the process equipment which is remotely operated. Thus, the simulator enhances the reliability and safety of the spent fuel handling process by providing the remote monitoring function of the process. The graphical design system and the digital mock-up system can be effectively used for designing the process equipment, as well as the optimized process and maintenance process. And the on-line graphic simulator can be an alternative of the conventional process monitoring system which is a hardware based system.

  14. Multikanban model for disassembly line with demand fluctuation

    Science.gov (United States)

    Udomsawat, Gun; Gupta, Surendra M.; Al-Turki, Yousef A. Y.

    2004-02-01

    In recent years, the continuous growth in consumer waste and dwindling natural resources has seriously threatened the environment. Realizing this, several countries have passed regulations that force manufacturers not only to manufacture environmentally conscious products, but also to take back their used products from consumers so that the components and materials recovered from the products may be reused and/or recycled. Disassembly plays an important role in product recovery. A disassembly line is perhaps the most suitable setting for disassembly of products in large quantities. Because a disassembly line has a tendency to generate excessive inventory, employing a kanban system can reduce the inventory level and let the system run more efficiently. A disassembly line is quite different from an assembly line. For example, not only can the demand arrive at the last station, it can also arrive at any of the other stations in the system. The demand for a component on the disassembly line could fluctuate widely. In fact, there are many other complicating matters that need to be considered to implement the concept of kanbans in such an environment. In this paper, we discuss the complications that are unique to a disassembly line. We discuss the complications in utilizing the conventional production control mechanisms in a disassembly line setting. We then show how to overcome them by implementing kanbans in a disassembly line setting with demand fluctuation and introduce the concept of multi-kanban mechanism. We demonstrate its effectiveness using a simulation model. An example is presented to illustrate the concept.

  15. EDITORIAL: Special issue on time scale algorithms

    Science.gov (United States)

    Matsakis, Demetrios; Tavella, Patrizia

    2008-12-01

    This special issue of Metrologia presents selected papers from the Fifth International Time Scale Algorithm Symposium (VITSAS), including some of the tutorials presented on the first day. The symposium was attended by 76 persons, from every continent except Antarctica, by students as well as senior scientists, and hosted by the Real Instituto y Observatorio de la Armada (ROA) in San Fernando, Spain, whose staff further enhanced their nation's high reputation for hospitality. Although a timescale can be simply defined as a weighted average of clocks, whose purpose is to measure time better than any individual clock, timescale theory has long been and continues to be a vibrant field of research that has both followed and helped to create advances in the art of timekeeping. There is no perfect timescale algorithm, because every one embodies a compromise involving user needs. Some users wish to generate a constant frequency, perhaps not necessarily one that is well-defined with respect to the definition of a second. Other users might want a clock which is as close to UTC or a particular reference clock as possible, or perhaps wish to minimize the maximum variation from that standard. In contrast to the steered timescales that would be required by those users, other users may need free-running timescales, which are independent of external information. While no algorithm can meet all these needs, every algorithm can benefit from some form of tuning. The optimal tuning, and even the optimal algorithm, can depend on the noise characteristics of the frequency standards, or of their comparison systems, the most precise and accurate of which are currently Two Way Satellite Time and Frequency Transfer (TWSTFT) and GPS carrier phase time transfer. The interest in time scale algorithms and its associated statistical methodology began around 40 years ago when the Allan variance appeared and when the metrological institutions started realizing ensemble atomic time using more than

  16. Impact of different disassembly line balancing algorithms on the performance of dynamic kanban system for disassembly line

    Science.gov (United States)

    Kizilkaya, Elif A.; Gupta, Surendra M.

    2005-11-01

    In this paper, we compare the impact of different disassembly line balancing (DLB) algorithms on the performance of our recently introduced Dynamic Kanban System for Disassembly Line (DKSDL) to accommodate the vagaries of uncertainties associated with disassembly and remanufacturing processing. We consider a case study to illustrate the impact of various DLB algorithms on the DKSDL. The approach to the solution, scenario settings, results and the discussions of the results are included.

  17. Asymmetric disassembly and robustness in declining networks

    Science.gov (United States)

    Saavedra, Serguei; Reed-Tsochas, Felix; Uzzi, Brian

    2008-01-01

    Mechanisms that enable declining networks to avert structural collapse and performance degradation are not well understood. This knowledge gap reflects a shortage of data on declining networks and an emphasis on models of network growth. Analyzing >700,000 transactions between firms in the New York garment industry over 19 years, we tracked this network's decline and measured how its topology and global performance evolved. We find that favoring asymmetric (disassortative) links is key to preserving the topology and functionality of the declining network. Based on our findings, we tested a model of network decline that combines an asymmetric disassembly process for contraction with a preferential attachment process for regrowth. Our simulation results indicate that the model can explain robustness under decline even if the total population of nodes contracts by more than an order of magnitude, in line with our observations for the empirical network. These findings suggest that disassembly mechanisms are not simply assembly mechanisms in reverse and that our model is relevant to understanding the process of decline and collapse in a broad range of biological, technological, and financial networks. PMID:18936489

  18. Phosphatase PP2A and microtubule-mediated pulling forces disassemble centrosomes during mitotic exit

    Directory of Open Access Journals (Sweden)

    Stephen J. Enos

    2018-01-01

    Full Text Available Centrosomes are microtubule-nucleating organelles that facilitate chromosome segregation and cell division in metazoans. Centrosomes comprise centrioles that organize a micron-scale mass of protein called pericentriolar material (PCM from which microtubules nucleate. During each cell cycle, PCM accumulates around centrioles through phosphorylation-mediated assembly of PCM scaffold proteins. During mitotic exit, PCM swiftly disassembles by an unknown mechanism. Here, we used Caenorhabditis elegans embryos to determine the mechanism and importance of PCM disassembly in dividing cells. We found that the phosphatase PP2A and its regulatory subunit SUR-6 (PP2ASUR-6, together with cortically directed microtubule pulling forces, actively disassemble PCM. In embryos depleted of these activities, ∼25% of PCM persisted from one cell cycle into the next. Purified PP2ASUR-6 could dephosphorylate the major PCM scaffold protein SPD-5 in vitro. Our data suggest that PCM disassembly occurs through a combination of dephosphorylation of PCM components and force-driven fragmentation of the PCM scaffold.

  19. Hot dense nuclear matter and its disassembly

    International Nuclear Information System (INIS)

    Samaddar, S.K.; Pal, Subrata; De, J.N.

    1996-01-01

    Transient hot and compressed nuclear matter created in energetic nuclear collisions responds to the perturbation through a sudden expansion and subsequent emission of a large number of light particles as well as intermediate mass fragments (IMFs). These particles carry the imprint of the thermal energy as well as the collective flow energy of the disassembling system. The effect of radial collective flow on the element distribution in prompt nuclear multifragmentation is studied in a quantum statistical model. The production of very light particles is seen to increase with flow energy at all temperatures. The yield of IMFs is enhanced only at relatively low temperatures and suppressed at high temperatures. The IMF-IMF correlation functions have also been studied and it is seen that the peak-structure of the functions are washed out with increasing flow energy. (author). 18 refs., 5 figs

  20. Disassembling and modification of RA-3

    International Nuclear Information System (INIS)

    Tarizzo, R.D.

    1990-01-01

    The objective of this paper is to describe the partial disassembling and modification of RA-3, called the Modernization Project. It comprises all the technical and administrative steps directly related with this task. The improvement of RA-3 is a result of the lack of 90% enriched uranium obliging a change over to 20% enriched uranium. This brought about design modifications both in fuel elements and the reactor. The presentation of documents for the licensing authority as well as are detailed separately. The modernization project was divided in 25 tasks: 1) changing fuel element support table, 2) changing heat exchanger, 3) repairing of cooling towers, 4) repairing of primary circuit valves, 5) repairing of irradiation channels, 6) construction of a new sampler, 7) changing tangential channel, 8) cleaning and disassembling of reactor (inside), 9) changing continuous demineralizer (ion exchange column), 10) detection of failure in fuel elements, 11) modification of nuclear instrumentation, 12) modification of conventional instrumentation, 13) modification of electrical system, 14) changing telemanipulators, 15) construction of mechanism bridge, 16) changing a primary circuit valve when the heat exchanger is changed too, 17) painting ground floor, hall floor, and pump room floor with epoxy resin levelling, 18) installation of fire alarm system, 19) radioactive liquid discharge, 20) modification of secondary circuit (This task involves: a) installation of a third secondary pump, b) extension of this piping, c) installation of two 12 inch valves to the present cooling towers pools independent, d) installation of filtering system), 21) optimization hot water bed, 22) changing detector support table, 23) removal, decontamination and reinstallation of shielding, 25) changing pneumatic system

  1. Almost Automorphic Functions on the Quantum Time Scale and Applications

    Directory of Open Access Journals (Sweden)

    Yongkun Li

    2017-01-01

    Full Text Available We first propose two types of concepts of almost automorphic functions on the quantum time scale. Secondly, we study some basic properties of almost automorphic functions on the quantum time scale. Then, we introduce a transformation between functions defined on the quantum time scale and functions defined on the set of generalized integer numbers; by using this transformation we give equivalent definitions of almost automorphic functions on the quantum time scale; following the idea of the transformation, we also give a concept of almost automorphic functions on more general time scales that can unify the concepts of almost automorphic functions on almost periodic time scales and on the quantum time scale. Finally, as an application of our results, we establish the existence of almost automorphic solutions of linear and semilinear dynamic equations on the quantum time scale.

  2. Interplay between multiple length and time scales in complex ...

    Indian Academy of Sciences (India)

    Administrator

    micelles and enzymes, can span several orders of magnitude in length and time scales. The length and time scales of ... length and time scales is required in order to understand and predict structure and dynamics in such com- plex systems. This review .... The late 1980s saw the birth of femtochemistry with Ahmed Zewail ...

  3. Systems impacts of spent fuel disassembly alternatives

    International Nuclear Information System (INIS)

    1984-07-01

    Three studies were completed to evaluate four alternatives to the disposal of intact spent fuel assemblies in a geologic repository. A preferred spent fuel waste form for disposal was recommended on consideration of (1) package design and fuel/package interaction, (2) long-term, in-repository performance of the waste form, and (3) overall process performance and costs for packaging, handling, and emplacement. The four basic alternative waste forms considered were (1) end fitting removal, (2) fission gas venting, (3) disassembly and close packing, and (4) shearing/immobilization. None of the findings ruled out any alternative on the basis of waste package considerations or long-term performance of the waste form. The third alternative offers flexibility in loading that may prove attractive in the various geologic media under consideration, greatly reduces the number of packages, and has the lowest unit cost. These studies were completed in October, 1981. Since then Westinghouse Electric Corporation and the Office of Nuclear Waste Isolation have completed studies in related fields. This report is now being published to provide publicly the background material that is contained within. 47 references, 28 figures, 31 tables

  4. Time scales separation for dynamo action

    OpenAIRE

    Dormy, Emmanuel; Gerard-Varet, David

    2008-01-01

    International audience; The study of dynamo action in astrophysical objects classically involves two timescales: the slow diffusive one and the fast advective one. We investigate the possibility of field amplification on an intermediate timescale associated with time dependent modulations of the flow. We consider a simple steady configuration for which dynamo action is not realised. We study the effect of time dependent perturbations of the flow. We show that {some} vanishing {low frequency} ...

  5. Alpha Decontamination and Disassembly Pilot Facility. Final report

    International Nuclear Information System (INIS)

    Daugherty, B.A.; Clark, H.E.

    1985-04-01

    The Alpha Decontamination and Disassembly (AD and D) Pilot Facility was built to develop and demonstrate a reference process for the decontamination and size reduction of noncombustible transuranic (TRU) waste. The goals of the reference process were to remove >99% of the surface contamination to the high-level waste tanks, and to achieve volume reduction factors greater than 15:1. Preliminary bench-scale decontamination work was accomplished at Savannah River Laboratory (SRL), establishing a reference decontamination process. Initially, the pilot facility did not achieve the decontamination goals. As the program continued, and modifications to the process were made, coupon analysis idicated that 99% of the surface contamination was removed to the high-level drain system. Prior to the AD and D Pilot Facility, no size reduction work had been done at SRL. Several other Department of Energy (DOE) facilities were experimenting with plasma arc torches for size reduction work. Their methods were employed in the AD and D hot cell with moderate success. The experimental work concluded with recommendations for further testing of other size reduction techniques. 11 figs., 6 tabs

  6. Leukocytes Breach Endothelial Barriers by Insertion of Nuclear Lobes and Disassembly of Endothelial Actin Filaments

    Directory of Open Access Journals (Sweden)

    Sagi Barzilai

    2017-01-01

    Full Text Available The endothelial cytoskeleton is a barrier for leukocyte transendothelial migration (TEM. Mononuclear and polymorphonuclear leukocytes generate gaps of similar micron-scale size when squeezing through inflamed endothelial barriers in vitro and in vivo. To elucidate how leukocytes squeeze through these barriers, we co-tracked the endothelial actin filaments and leukocyte nuclei in real time. Nuclear squeezing involved either preexistent or de novo-generated lobes inserted into the leukocyte lamellipodia. Leukocyte nuclei reversibly bent the endothelial actin stress fibers. Surprisingly, formation of both paracellular gaps and transcellular pores by squeezing leukocytes did not require Rho kinase or myosin II-mediated endothelial contractility. Electron-microscopic analysis suggested that nuclear squeezing displaced without condensing the endothelial actin filaments. Blocking endothelial actin turnover abolished leukocyte nuclear squeezing, whereas increasing actin filament density did not. We propose that leukocyte nuclei must disassemble the thin endothelial actin filaments interlaced between endothelial stress fibers in order to complete TEM.

  7. Objective quality measurement for audio time-scale modification

    Science.gov (United States)

    Liu, Fang; Lee, Jae-Joon; Kuo, C. C. J.

    2003-11-01

    The recent ITU-T Recommendation P.862, known as the Perceptual Evaluation of Speech Quality (PESQ) is an objective end-to-end speech quality assessment method for telephone networks and speech codecs through the measurement of received audio quality. To ensure that certain network distortions will not affect the estimated subjective measurement determined by PESQ, the algorithm takes into account packet loss, short-term and long-term time warping resulted from delay variation. However, PESQ does not work well for time-scale audio modification or temporal clipping. We investigated the factors that impact the perceived quality when time-scale modification is involved. An objective measurement of time-scale modification is proposed in this research, where the cross-correlation values obtained from time-scale modification synchronization are used to evaluate the quality of a time-scaled audio sequence. This proposed objective measure has been verified by a subjective test.

  8. Exploiting natural scale separation with efficient asynchronous numerical time integration

    Science.gov (United States)

    Rubel, Michael; Leonard, Anthony

    2002-11-01

    The systems of ordinary differential equations that arise in problems of computational fluid mechanics often exhibit time-scale separation in addition to being stiff: each solution variable acts at a small range of time scales relative to the problem as a whole. When only a small fraction of the solution variables act at the fastest scales, conventional timestepping algorithms waste a great deal of effort over-resolving the slow variables. In this talk, I will discuss numerical strategies to take advantage of time-scale separation for more efficient computing. In particular, results from the dead-reckoning algorithm will be presented.

  9. Cleaning, disassembly, and requalification of the FFTF in vessel handling machine

    International Nuclear Information System (INIS)

    Coops, W.J.

    1977-10-01

    The Engineering Model In Vessel Handling Machine (IVHM) was successfully removed, cleaned, disassembled, inspected, reassembled and reinstalled into the sodium test vessel at Richland, Washington. This was the first time in the United States a full size operational sodium wetted machine has been cleaned by the water vapor nitrogen process and requalified for operation. The work utilized an atmospheric control system during removal, a tank type water vapor nitrogen cleaning system and an open ''hands on'' disassembly and assembly stand. Results of the work indicate the tools, process and equipment are adequate for the non-radioactive maintenance sequence. Additionally, the work proves that a machine of this complexity can be successfully cleaned, maintained and re-used without the need to replace a large percentage of the sodium wetted parts

  10. Properties of Some Partial Dynamic Equations on Time Scales

    Directory of Open Access Journals (Sweden)

    Deepak B. Pachpatte

    2013-01-01

    Full Text Available The main objective of the paper is to study the properties of the solution of a certain partial dynamic equation on time scales. The tools employed are based on the application of the Banach fixed-point theorem and a certain integral inequality with explicit estimates on time scales.

  11. Bounds of Certain Dynamic Inequalities on Time Scales

    Directory of Open Access Journals (Sweden)

    Deepak B. Pachpatte

    2014-10-01

    Full Text Available In this paper we study explicit bounds of certain dynamic integral inequalities on time scales. These estimates give the bounds on unknown functions which can be used in studying the qualitative aspects of certain dynamic equations. Using these inequalities we prove the uniqueness of some partial integro-differential equations on time scales.

  12. Temperature dependence of fluctuation time scales in spin glasses

    DEFF Research Database (Denmark)

    Kenning, Gregory G.; Bowen, J.; Sibani, Paolo

    2010-01-01

    Using a series of fast cooling protocols we have probed aging effects in the spin glass state as a function of temperature. Analyzing the logarithmic decay found at very long time scales within a simple phenomenological barrier model, leads to the extraction of the fluctuation time scale of the s...

  13. Time scales of tunneling decay of a localized state

    International Nuclear Information System (INIS)

    Ban, Yue; Muga, J. G.; Sherman, E. Ya.; Buettiker, M.

    2010-01-01

    Motivated by recent time-domain experiments on ultrafast atom ionization, we analyze the transients and time scales that characterize, aside from the relatively long lifetime, the decay of a localized state by tunneling. While the tunneling starts immediately, some time is required for the outgoing flux to develop. This short-term behavior depends strongly on the initial state. For the initial state, tightly localized so that the initial transients are dominated by over-the-barrier motion, the time scale for flux propagation through the barrier is close to the Buettiker-Landauer traversal time. Then a quasistationary, slow-decay process follows, which sets ideal conditions for observing diffraction in time at longer times and distances. To define operationally a tunneling time at the barrier edge, we extrapolate backward the propagation of the wave packet that escaped from the potential. This extrapolated time is considerably longer than the time scale of the flux and density buildup at the barrier edge.

  14. Disassembly of cemented bipolar prothesis of the hip.

    Science.gov (United States)

    Guo, Jiong Jiong; Yang, Huilin; Yang, Tongqi; Tang, Tiansi

    2008-08-01

    A case of spontaneous disassembly of a bipolar prothesis after hemiarthroplasty due to a dislocation of the hip in an 85-year-old woman is presented, which is a rare complication. Open reduction was performed and original components were used because there was no acetabular and polyethylene linear erosion. The result was satisfactory at final follow-up (36 months), and radiographs showed no acetabular erosion, polyethylene wear, femoral subsidence, or component migration. To date, only 6 cases of disassembly of bipolar components have been reported in the English literature. In almost all cases, the injury was caused without any significant force, as only 2 patients reported a fall. Most were elderly women. We classified them into 3 types according to the etiology: iatrogenic disassembly (type I), erosion of the polyethylene liner (type II), and spontaneous disassembly (type III). Spontaneous disassembly is uncommon and seemed to be caused by a failure of the locking mechanism between the head components, resulting in an intraacetabular dislocation. Open reduction is required and revision surgery is judged by the locking mechanism between components. When there is no acetabular and polyethylene linear erosion, we believe that the original components can be used again. Although the potential disadvantage of bipolar systems shown here does not outweigh the advantages, we should rethink the status of bipolar hemiarthroplasty.

  15. Disassembling archeology, reassembling the modern world.

    Science.gov (United States)

    Carruthers, William; Van Damme, Stéphane

    2017-09-01

    This article provides a substantive discussion of the relevance of the history of archeology to the history of science. At the same time, the article introduces the papers contained in this special issue as exemplars of this relevance. To make its case, the article moves through various themes in the history of archeology that overlap with key issues in the history of science. The article discusses the role and tension of regimes of science in antiquarian and archeological practices, and also considers issues of scale and place, particularly in relation to the field. Additionally, the piece attends to issues of professionalization and the constitution of an archeological public, at the same time as discussing issues of empire, colonialism, and the circulation of knowledge. Meanwhile, enriching discussions within and beyond the history of science, the article discusses the history of archeology and its relationship with museums, collecting, and material culture and materiality. Finally, the piece discusses the relationship of the history of archeology with wider discussions about scientific ethics. In conclusion, the article questions whether we should speak of 'the history of archeology' at all.

  16. Soil moisture memory at sub-monthly time scales

    Science.gov (United States)

    Mccoll, K. A.; Entekhabi, D.

    2017-12-01

    For soil moisture-climate feedbacks to occur, the soil moisture storage must have `memory' of past atmospheric anomalies. Quantifying soil moisture memory is, therefore, essential for mapping and characterizing land-atmosphere interactions globally. Most previous studies estimate soil moisture memory using metrics based on the autocorrelation function of the soil moisture time series (e.g., the e-folding autocorrelation time scale). This approach was first justified by Delworth and Manabe (1988) on the assumption that monthly soil moisture time series can be modelled as red noise. While this is a reasonable model for monthly soil moisture averages, at sub-monthly scales, the model is insufficient due to the highly non-Gaussian behavior of the precipitation forcing. Recent studies have shown that significant soil moisture-climate feedbacks appear to occur at sub-monthly time scales. Therefore, alternative metrics are required for defining and estimating soil moisture memory at these shorter time scales. In this study, we introduce metrics, based on the positive and negative increments of the soil moisture time series, that can be used to estimate soil moisture memory at sub-monthly time scales. The positive increments metric corresponds to a rapid drainage time scale. The negative increments metric represents a slower drying time scale that is most relevant to the study of land-atmosphere interactions. We show that autocorrelation-based metrics mix the two time scales, confounding physical interpretation. The new metrics are used to estimate soil moisture memory at sub-monthly scales from in-situ and satellite observations of soil moisture. Reference: Delworth, Thomas L., and Syukuro Manabe. "The Influence of Potential Evaporation on the Variabilities of Simulated Soil Wetness and Climate." Journal of Climate 1, no. 5 (May 1, 1988): 523-47. doi:10.1175/1520-0442(1988)0012.0.CO;2.

  17. Disassembling and cleaning apparatus for control rod drives

    International Nuclear Information System (INIS)

    Yoshida, Tomiji; Sasaki, Masayoshi; Numata, Nobumasa; Oowada, Masataka; Arazoe, Masatoshi.

    1981-01-01

    Purpose: To shorten the working period, as well as decrease the number of operators and radiation exposure doses for disassembling and cleaning of the control rod drives. Constitution: The apparatus comprises a cleaning tank, clamp units, inner and outer surface cleaning nozzles, a high pressure pump, a drying tank unit, electronic components and the likes. This enables to render the various works automatic, such as wash out of outer and inner filters and strainers at high radiation dose levels, extraction and cleaning of a piston tube and an index tube, cleaning for the control rod drive main body, and cleaning and drying of small components, whereby the disassembling, cleaning and assembling works for the control rod drives, among all, the disassembling and cleaning works resulting relatively high radiation exposure doses to the operator can be made in a remote control and semi-automatic manner. (Furukawa, Y.)

  18. Liquidity spillover in international stock markets through distinct time scales.

    Science.gov (United States)

    Righi, Marcelo Brutti; Vieira, Kelmara Mendes

    2014-01-01

    This paper identifies liquidity spillovers through different time scales based on a wavelet multiscaling method. We decompose daily data from U.S., British, Brazilian and Hong Kong stock markets indices in order to calculate the scale correlation between their illiquidities. The sample is divided in order to consider non-crisis, sub-prime crisis and Eurozone crisis. We find that there are changes in correlations of distinct scales and different periods. Association in finest scales is smaller than in coarse scales. There is a rise on associations in periods of crisis. In frequencies, there is predominance for significant distinctions involving the coarsest scale, while for crises periods there is predominance for distinctions on the finest scale.

  19. AFSC/ABL: Naknek sockeye salmon scale time series

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A time series of scale samples (1956 2002) collected from adult sockeye salmon returning to Naknek River were retrieved from the Alaska Department of Fish and Game....

  20. AFSC/ABL: Ugashik sockeye salmon scale time series

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A time series of scale samples (1956 b?? 2002) collected from adult sockeye salmon returning to Ugashik River were retrieved from the Alaska Department of Fish and...

  1. An extended Halanay inequality of integral type on time scales

    Directory of Open Access Journals (Sweden)

    Boqun Ou

    2015-07-01

    Full Text Available In this paper, we obtain a Halanay-type inequality of integral type on time scales which improves and extends some earlier results for both the continuous and discrete cases. Several illustrative examples are also given.

  2. Periodic Solutions for a Delayed Population Model on Time Scales

    OpenAIRE

    Kejun Zhuang; Zhaohui Wen

    2010-01-01

    This paper deals with a delayed single population model on time scales. With the assistance of coincidence degree theory, sufficient conditions for existence of periodic solutions are obtained. Furthermore, the better estimations for bounds of periodic solutions are established.

  3. Clathrin coat disassembly by the yeast Hsc70/Ssa1p and auxilin/Swa2p proteins observed by single-particle burst analysis spectroscopy.

    Science.gov (United States)

    Krantz, Kelly C; Puchalla, Jason; Thapa, Rajan; Kobayashi, Callie; Bisher, Margaret; Viehweg, Julie; Carr, Chavela M; Rye, Hays S

    2013-09-13

    The role of clathrin-coated vesicles in receptor-mediated endocytosis is conserved among eukaryotes, and many of the proteins required for clathrin coat assembly and disassembly have orthologs in yeast and mammals. In yeast, dozens of proteins have been identified as regulators of the multistep reaction required for endocytosis, including those that regulate disassembly of the clathrin coat. In mammalian systems, clathrin coat disassembly has been reconstituted using neuronal clathrin baskets mixed with the purified chaperone ATPase 70-kDa heat shock cognate (Hsc70), plus a clathrin-specific co-chaperone, such as the synaptic protein auxilin. Yet, despite previous characterization of the yeast Hsc70 ortholog, Ssa1p, and the auxilin-like ortholog, Swa2p, testing mechanistic models for disassembly of nonneuronal clathrin coats has been limited by the absence of a functional reconstitution assay. Here we use single-particle burst analysis spectroscopy, in combination with fluorescence correlation spectroscopy, to follow the population dynamics of fluorescently tagged yeast clathrin baskets in the presence of purified Ssa1p and Swa2p. An advantage of this combined approach for mechanistic studies is the ability to measure, as a function of time, changes in the number and size of objects from a starting population to the reaction products. Our results indicate that Ssa1p and Swa2p cooperatively disassemble yeast clathrin baskets into fragments larger than the individual triskelia, suggesting that disassembly of clathrin-coated vesicles may proceed through a partially uncoated intermediate.

  4. Some New Inequalities of Opial's Type on Time Scales

    Directory of Open Access Journals (Sweden)

    Samir H. Saker

    2012-01-01

    Full Text Available We will prove some new dynamic inequalities of Opial's type on time scales. The results not only extend some results in the literature but also improve some of them. Some continuous and discrete inequalities are derived from the main results as special cases. The results can be applied on the study of distribution of generalized zeros of half-linear dynamic equations on time scales.

  5. Characteristic Time Scales of Characteristic Magmatic Processes and Systems

    Science.gov (United States)

    Marsh, B. D.

    2004-05-01

    Every specific magmatic process, regardless of spatial scale, has an associated characteristic time scale. Time scales associated with crystals alone are rates of growth, dissolution, settling, aggregation, annealing, and nucleation, among others. At the other extreme are the time scales associated with the dynamics of the entire magmatic system. These can be separated into two groups: those associated with system genetics (e.g., the production and transport of magma, establishment of the magmatic system) and those due to physical characteristics of the established system (e.g., wall rock failure, solidification front propagation and instability, porous flow). The detailed geometry of a specific magmatic system is particularly important to appreciate; although generic systems are useful, care must be taken to make model systems as absolutely realistic as possible. Fuzzy models produce fuzzy science. Knowledge of specific time scales is not necessarily useful or meaningful unless the hierarchical context of the time scales for a realistic magmatic system is appreciated. The age of a specific phenocryst or ensemble of phenocrysts, as determined from isotopic or CSD studies, is not meaningful unless something can be ascertained of the provenance of the crystals. For example, crystal size multiplied by growth rate gives a meaningful crystal age only if it is from a part of the system that has experienced semi-monotonic cooling prior to chilling; crystals entrained from a long-standing cumulate bed that were mechanically sorted in ascending magma may not reveal this history. Ragged old crystals rolling about in the system for untold numbers of flushing times record specious process times, telling more about the noise in the system than the life of typical, first generation crystallization processes. The most helpful process-related time scales are those that are known well and that bound or define the temporal style of the system. Perhaps the most valuable of these

  6. Exponentials and Laplace transforms on nonuniform time scales

    Science.gov (United States)

    Ortigueira, Manuel D.; Torres, Delfim F. M.; Trujillo, Juan J.

    2016-10-01

    We formulate a coherent approach to signals and systems theory on time scales. The two derivatives from the time-scale calculus are used, i.e., nabla (forward) and delta (backward), and the corresponding eigenfunctions, the so-called nabla and delta exponentials, computed. With these exponentials, two generalised discrete-time Laplace transforms are deduced and their properties studied. These transforms are compatible with the standard Laplace and Z transforms. They are used to study discrete-time linear systems defined by difference equations. These equations mimic the usual continuous-time equations that are uniformly approximated when the sampling interval becomes small. Impulse response and transfer function notions are introduced. This implies a unified mathematical framework that allows us to approximate the classic continuous-time case when the sampling rate is high or to obtain the standard discrete-time case, based on difference equations, when the time grid becomes uniform.

  7. Time-Scale and Time-Frequency Analyses of Irregularly Sampled Astronomical Time Series

    Directory of Open Access Journals (Sweden)

    S. Roques

    2005-09-01

    Full Text Available We evaluate the quality of spectral restoration in the case of irregular sampled signals in astronomy. We study in details a time-scale method leading to a global wavelet spectrum comparable to the Fourier period, and a time-frequency matching pursuit allowing us to identify the frequencies and to control the error propagation. In both cases, the signals are first resampled with a linear interpolation. Both results are compared with those obtained using Lomb's periodogram and using the weighted waveletZ-transform developed in astronomy for unevenly sampled variable stars observations. These approaches are applied to simulations and to light variations of four variable stars. This leads to the conclusion that the matching pursuit is more efficient for recovering the spectral contents of a pulsating star, even with a preliminary resampling. In particular, the results are almost independent of the quality of the initial irregular sampling.

  8. Microsecond time-scale kinetics of transient biochemical reactions

    NARCIS (Netherlands)

    Mitic, S.; Strampraad, M.J.F.; Hagen, W.R.; de Vries, S.

    2017-01-01

    To afford mechanistic studies in enzyme kinetics and protein folding in the microsecond time domain we have developed a continuous-flow microsecond time-scale mixing instrument with an unprecedented dead-time of 3.8 ± 0.3 μs. The instrument employs a micro-mixer with a mixing time of 2.7 μs

  9. Functional and cosmetic outcome of partial penile disassembly ...

    African Journals Online (AJOL)

    Objective: To evaluate the functional and cosmetic outcome of single stage partial penile disassembly repair in isolated male epispadias. Patients and methods: A retrospective analysis of 43 cases of primary epispadias repair, performed during July 1998 to March 2013. Patients were classified on the basis of type of ...

  10. Innovation and employee injury risk in automotive disassembly operations

    DEFF Research Database (Denmark)

    Neumann, W. Patrick; Winkel, Jørgen; Palmerud, Gunnar

    2018-01-01

    Engineering innovations in car disassembly systems are studied for affects on system operators’ risk of repetitive strain injury (RSI). Objective instrumented measures of injury risk factors with synchronised video-based task analyses were used to examine changes in operators’ RSI risk during...

  11. Time scale bias in erosion rates of glaciated landscapes.

    Science.gov (United States)

    Ganti, Vamsi; von Hagke, Christoph; Scherler, Dirk; Lamb, Michael P; Fischer, Woodward W; Avouac, Jean-Philippe

    2016-10-01

    Deciphering erosion rates over geologic time is fundamental for understanding the interplay between climate, tectonic, and erosional processes. Existing techniques integrate erosion over different time scales, and direct comparison of such rates is routinely done in earth science. On the basis of a global compilation, we show that erosion rate estimates in glaciated landscapes may be affected by a systematic averaging bias that produces higher estimated erosion rates toward the present, which do not reflect straightforward changes in erosion rates through time. This trend can result from a heavy-tailed distribution of erosional hiatuses (that is, time periods where no or relatively slow erosion occurs). We argue that such a distribution can result from the intermittency of erosional processes in glaciated landscapes that are tightly coupled to climate variability from decadal to millennial time scales. In contrast, we find no evidence for a time scale bias in spatially averaged erosion rates of landscapes dominated by river incision. We discuss the implications of our findings in the context of the proposed coupling between climate and tectonics, and interpreting erosion rate estimates with different averaging time scales through geologic time.

  12. Hydrodynamic time scales for intense laser-heated clusters

    International Nuclear Information System (INIS)

    Parra, Enrique; Alexeev, Ilya; Fan, Jingyun; Kim, Kiong Y.; McNaught, Stuart J.; Milchberg, Howard M.

    2003-01-01

    Measurements are presented of x-ray (>1.5 keV) and extreme ultraviolet (EUV, λ equal to 2-44 nm) emission from argon clusters irradiated with constant-energy (50 mJ), variable-width laser pulses ranging from 100 fs to 10 ns. The results for clusters can be understood in terms of two time scales: a short time scale for optimal resonant absorption at the critical-density layer in the expanding plasma, and a longer time scale for the plasma to drop below critical density. We present a one-dimensional hydrodynamic model of the intense laser-cluster interaction in which the laser field is treated self-consistently. We find that nonuniform expansion of the heated material results in long-time resonance of the laser field at the critical-density plasma layer. These simulations explain the dependence of generation efficiency on laser pulse width

  13. Multi-kanban mechanism for personal computer disassembly

    Science.gov (United States)

    Udomsawat, Gun; Gupta, Surendra M.; Kamarthi, Sagar V.

    2004-12-01

    The use of personal computers (PCs) continues to increase every year. According to a 1999 figure, 50 percent of all US households owned PCs, a figure that continues to rise every year. With continuous development of sophisticated software, PCs are becoming increasingly powerful. In addition, the price of a PC continues to steadily decline. Furthermore, the typical life of a PC in the workplace is approximately two to three years while in the home it is three to five years. As these PCs become obsolete, they are replaced and the old PCs are disposed of. It is estimated that between 14 and 20 million PCs are retired annually in the US. While 20 to 30% of the units may be resold, the others are discarded. These discards represent a significant potential source of lead for the waste stream. In some communities, waste cathode ray tubes (CRTs) represent the second largest source of lead in the waste stream after vehicular lead acid batteries. PCs are, therefore, not suitable for dumping in landfills. Besides, several components of a PC can be reused and then there are other valuable materials that can also be harvested. And with the advent of product stewardship, product recovery is the best solution for manufacturers. Disassembly line is perhaps the most suitable set up for disassembling PCs. However, planning and scheduling of disassembly on a disassembly line is complicated. In this paper, we discuss some of the complications including product arrival, demand arrival, inventory fluctuation and production control mechanisms. We then show how to overcome them by implementing a multi-kanban mechanism in the PC disassembly line setting. The multi-kanban mechanism relies on dynamic routing of kanbans according to the state of the system. We investigate the multi-kanban mechanism using simulation and demonstrate that this mechanism is superior to the traditional push system in terms of controlling the system"s inventory while maintaining a decent customer service level.

  14. Ignition in net for different energy confinement time scalings

    International Nuclear Information System (INIS)

    Johner, J.; Prevot, F.

    1988-06-01

    A zero-dimensional profile dependent model is used to assess the feasibility of ignition in the extended version of NET. Five recent scalings for the energy confinement time (Goldston, Kaye All, Kaye Big, Shimomura-Odajima, Rebut-Lallia) are compared in the frame of two different scenarii, i.e., H-mode with a flat density profile or L-mode with a peaked density profile. For the flat density H-mode case, ignition is accessible with none of the scalings except Rebut-Lallia's. For the peaked density L-mode case, ignition is accessible with none of the scalings except Rebut-Lallia's. For the two Kaye's scalings, ignition is forbidden in H-mode even with the peaked density profile. For the Rebut-Lallia scaling, ignition is allowed in L-mode even with the flat density profile

  15. Deviations from uniform power law scaling in nonstationary time series

    Science.gov (United States)

    Viswanathan, G. M.; Peng, C. K.; Stanley, H. E.; Goldberger, A. L.

    1997-01-01

    A classic problem in physics is the analysis of highly nonstationary time series that typically exhibit long-range correlations. Here we test the hypothesis that the scaling properties of the dynamics of healthy physiological systems are more stable than those of pathological systems by studying beat-to-beat fluctuations in the human heart rate. We develop techniques based on the Fano factor and Allan factor functions, as well as on detrended fluctuation analysis, for quantifying deviations from uniform power-law scaling in nonstationary time series. By analyzing extremely long data sets of up to N = 10(5) beats for 11 healthy subjects, we find that the fluctuations in the heart rate scale approximately uniformly over several temporal orders of magnitude. By contrast, we find that in data sets of comparable length for 14 subjects with heart disease, the fluctuations grow erratically, indicating a loss of scaling stability.

  16. Length and time scales of atmospheric moisture recycling

    Directory of Open Access Journals (Sweden)

    R. J. van der Ent

    2011-03-01

    Full Text Available It is difficult to quantify the degree to which terrestrial evaporation supports the occurrence of precipitation within a certain study region (i.e. regional moisture recycling due to the scale- and shape-dependence of regional moisture recycling ratios. In this paper we present a novel approach to quantify the spatial and temporal scale of moisture recycling, independent of the size and shape of the region under study. In contrast to previous studies, which essentially used curve fitting, the scaling laws presented by us follow directly from the process equation. thus allowing a fair comparison between regions and seasons. The calculation is based on ERA-Interim reanalysis data for the period 1999 to 2008. It is shown that in the tropics or in mountainous terrain the length scale of recycling can be as low as 500 to 2000 km. In temperate climates the length scale is typically between 3000 to 5000 km whereas it amounts to more than 7000 km in desert areas. The time scale of recycling ranges from 3 to 20 days, with the exception of deserts, where it is much longer. The most distinct seasonal differences can be observed over the Northern Hemisphere: in winter, moisture recycling is insignificant, whereas in summer it plays a major role in the climate. The length and time scales of atmospheric moisture recycling can be useful metrics to quantify local climatic effects of land use change.

  17. Fractional dynamic calculus and fractional dynamic equations on time scales

    CERN Document Server

    Georgiev, Svetlin G

    2018-01-01

    Pedagogically organized, this monograph introduces fractional calculus and fractional dynamic equations on time scales in relation to mathematical physics applications and problems. Beginning with the definitions of forward and backward jump operators, the book builds from Stefan Hilger’s basic theories on time scales and examines recent developments within the field of fractional calculus and fractional equations. Useful tools are provided for solving differential and integral equations as well as various problems involving special functions of mathematical physics and their extensions and generalizations in one and more variables. Much discussion is devoted to Riemann-Liouville fractional dynamic equations and Caputo fractional dynamic equations.  Intended for use in the field and designed for students without an extensive mathematical background, this book is suitable for graduate courses and researchers looking for an introduction to fractional dynamic calculus and equations on time scales. .

  18. Time-dependent scaling patterns in high frequency financial data

    Science.gov (United States)

    Nava, Noemi; Di Matteo, Tiziana; Aste, Tomaso

    2016-10-01

    We measure the influence of different time-scales on the intraday dynamics of financial markets. This is obtained by decomposing financial time series into simple oscillations associated with distinct time-scales. We propose two new time-varying measures of complexity: 1) an amplitude scaling exponent and 2) an entropy-like measure. We apply these measures to intraday, 30-second sampled prices of various stock market indices. Our results reveal intraday trends where different time-horizons contribute with variable relative amplitudes over the course of the trading day. Our findings indicate that the time series we analysed have a non-stationary multifractal nature with predominantly persistent behaviour at the middle of the trading session and anti-persistent behaviour at the opening and at the closing of the session. We demonstrate that these patterns are statistically significant, robust, reproducible and characteristic of each stock market. We argue that any modelling, analytics or trading strategy must take into account these non-stationary intraday scaling patterns.

  19. Evaluation of Scaling Invariance Embedded in Short Time Series

    Science.gov (United States)

    Pan, Xue; Hou, Lei; Stephen, Mutua; Yang, Huijie; Zhu, Chenping

    2014-01-01

    Scaling invariance of time series has been making great contributions in diverse research fields. But how to evaluate scaling exponent from a real-world series is still an open problem. Finite length of time series may induce unacceptable fluctuation and bias to statistical quantities and consequent invalidation of currently used standard methods. In this paper a new concept called correlation-dependent balanced estimation of diffusion entropy is developed to evaluate scale-invariance in very short time series with length . Calculations with specified Hurst exponent values of show that by using the standard central moving average de-trending procedure this method can evaluate the scaling exponents for short time series with ignorable bias () and sharp confidential interval (standard deviation ). Considering the stride series from ten volunteers along an approximate oval path of a specified length, we observe that though the averages and deviations of scaling exponents are close, their evolutionary behaviors display rich patterns. It has potential use in analyzing physiological signals, detecting early warning signals, and so on. As an emphasis, the our core contribution is that by means of the proposed method one can estimate precisely shannon entropy from limited records. PMID:25549356

  20. Foraging traits modulate stingless bee community disassembly under forest loss.

    Science.gov (United States)

    Lichtenberg, Elinor M; Mendenhall, Chase D; Brosi, Berry

    2017-10-01

    Anthropogenic land use change is an important driver of impacts to biological communities and the ecosystem services they provide. Pollination is one ecosystem service that may be threatened by community disassembly. Relatively little is known about changes in bee community composition in the tropics, where pollination limitation is most severe and land use change is rapid. Understanding how anthropogenic changes alter community composition and functioning has been hampered by high variability in responses of individual species. Trait-based approaches, however, are emerging as a potential method for understanding responses of ecologically similar species to global change. We studied how communities of tropical, eusocial stingless bees (Apidae: Meliponini) disassemble when forest is lost. These bees are vital tropical pollinators that exhibit high trait diversity, but are under considerable threat from human activities. We compared functional traits of stingless bee species found in pastures surrounded by differing amounts of forest in an extensively deforested landscape in southern Costa Rica. Our results suggest that foraging traits modulate competitive interactions that underlie community disassembly patterns. In contrast to both theoretical predictions and temperate bee communities, we found that stingless bee species with the widest diet breadths were less likely to persist in sites with less forest. These wide-diet-breadth species also tend to be solitary foragers, and are competitively subordinate to group-foraging stingless bee species. Thus, displacement by dominant, group-foraging species may make subordinate species more dependent on the larger or more diversified resource pool that natural habitats offer. We also found that traits that may reduce reliance on trees-nesting in the ground or inside nests of other species-correlated with persistence in highly deforested landscapes. The functional trait perspective we employed enabled capturing community

  1. Vibration amplitude rule study for rotor under large time scale

    International Nuclear Information System (INIS)

    Yang Xuan; Zuo Jianli; Duan Changcheng

    2014-01-01

    The rotor is an important part of the rotating machinery; its vibration performance is one of the important factors affecting the service life. This paper presents both theoretical analyses and experimental demonstrations of the vibration rule of the rotor under large time scales. The rule can be used for the service life estimation of the rotor. (authors)

  2. Multiple dynamical time-scales in networks with hierarchically ...

    Indian Academy of Sciences (India)

    Multiple dynamical time-scales in networks with hierarchically nested modular organization ... http://www.ias.ac.in/article/fulltext/pram/077/05/0833-0842 ... Many natural and engineered complex networks have intricate mesoscopic organization, e.g., the clustering of the constituent nodes into several communities or ...

  3. Gott time machines, BTZ black hole formation, and choptuik scaling

    Science.gov (United States)

    Birmingham; Sen

    2000-02-07

    We study the formation of Banados-Teitelboim-Zanelli black holes by the collision of point particles. It is shown that the Gott time machine, originally constructed for the case of vanishing cosmological constant, provides a precise mechanism for black hole formation. As a result, one obtains an exact analytic understanding of the Choptuik scaling.

  4. Speech Compensation for Time-Scale-Modified Auditory Feedback

    Science.gov (United States)

    Ogane, Rintaro; Honda, Masaaki

    2014-01-01

    Purpose: The purpose of this study was to examine speech compensation in response to time-scale-modified auditory feedback during the transition of the semivowel for a target utterance of /ija/. Method: Each utterance session consisted of 10 control trials in the normal feedback condition followed by 20 perturbed trials in the modified auditory…

  5. Wind power impacts and electricity storage - a time scale perspective

    DEFF Research Database (Denmark)

    Hedegaard, Karsten; Meibom, Peter

    2012-01-01

    technologies – batteries, flow batteries, compressed air energy storage, electrolysis combined with fuel cells, and electric vehicles – are moreover categorised with respect to the time scales at which they are suited to support wind power integration. While all of these technologies are assessed suitable...

  6. Time scales of coupled modes in the tropical climate system

    Science.gov (United States)

    An, S. I.; Bejarano, L.; Jin, F. F.

    2003-04-01

    Climate variability in the tropical Pacific has a rich frequency spectrum that partly results from coupled modes different time scales. We examined the contributions of the thermocline feedback (the vertical advection of anomalous subsurface temperature by the mean upwelling) and zonal advective feedback (the zonal advection of mean sea surface temperature by anomalous current) in determining the time scales of the coupled modes. Firstly, using a simple ocean model, we study the dependence of maximum amplitudes and locations of equatorial zonal current and thermocline on the time scales of the wind forcing. Then we examine in a linearized version of coupled Zebiak-Cane model the impacts of these feedbacks on the co-existence of leading coupled modes of different time scales. For slowly varying wind forcing, amplitudes of zonal currents are very weak and locate at western Pacific, whereas the thermocline response is strong. The zonal advective feedback thus tends but to be of secondly importance in a slow mode of interannual periodicity although it plays a dominating role in a fast coupled mode of near annual periodicity. The changes in the basic state of the coupled system can have significant impacts on the relative importance of the two main feedbacks and thus the periodicity and stability of the leading modes of the coupled tropical Pacific climate system.

  7. Exponential stability of dynamic equations on time scales

    Directory of Open Access Journals (Sweden)

    Raffoul Youssef N

    2005-01-01

    Full Text Available We investigate the exponential stability of the zero solution to a system of dynamic equations on time scales. We do this by defining appropriate Lyapunov-type functions and then formulate certain inequalities on these functions. Several examples are given.

  8. Decomposition of wind speed fluctuations at different time scales

    Indian Academy of Sciences (India)

    Understanding the inherent features of wind speed (variability on different time scales) has become critical for assured wind power availability, grid stability, and effective power management. The study utilizes the wavelet, autocorrelation, and FFT (fast Fourier transform) techniques to analyze and assimilate the fluctuating ...

  9. THEORETICAL REVIEW The Hippocampus, Time, and Memory Across Scales

    Science.gov (United States)

    Howard, Marc W.; Eichenbaum, Howard

    2014-01-01

    A wealth of experimental studies with animals have offered insights about how neural networks within the hippocampus support the temporal organization of memories. These studies have revealed the existence of “time cells” that encode moments in time, much as the well-known “place cells” map locations in space. Another line of work inspired by human behavioral studies suggests that episodic memories are mediated by a state of temporal context that changes gradually over long time scales, up to at least a few thousand seconds. In this view, the “mental time travel” hypothesized to support the experience of episodic memory corresponds to a “jump back in time” in which a previous state of temporal context is recovered. We suggest that these 2 sets of findings could be different facets of a representation of temporal history that maintains a record at the last few thousand seconds of experience. The ability to represent long time scales comes at the cost of discarding precise information about when a stimulus was experienced—this uncertainty becomes greater for events further in the past. We review recent computational work that describes a mechanism that could construct such a scale-invariant representation. Taken as a whole, this suggests the hippocampus plays its role in multiple aspects of cognition by representing events embedded in a general spatiotemporal context. The representation of internal time can be useful across nonhippocampal memory systems. PMID:23915126

  10. Capillarity-induced disassembly of virions in carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Fan Xiaobin; Peng Wenchao; Li Yang; Li Xianyu; Zhang Guoliang; Zhang Fengbao [School of Chemical Engineering and Technology, Tianjin University, Tianjin (China); Barclay, J Elaine; Evans, David J [Department of Biological Chemistry, John Innes Centre, Norwich Research Park, Norwich NR4 7UH (United Kingdom)], E-mail: fbzhang@tju.edu.cn

    2008-04-23

    Studying the transport and fate of viruses through nanochannels is of great importance. By using the nanochannel of a carbon nanotube (CNT) as an ideal model, we evaluated the possibility of capillarity-induced viral transport through a closely fitting nanochannel and explored the mechanisms involved. It is shown both experimentally and theoretically that Cowpea mosaic virus can enter CNTs by capillarity. However, when introduced into a nanotube the protein capsid may disassemble. During the initial capillary filling stage, anomalous needle-shaped high pressure exists in the centre of the nanotube's entrance. This high pressure, combining with the significant negative pressure within the nanotube, may account for the disassembly of the virions.

  11. Integrating Safeguards into the Pit Disassembly and Conversion Facility

    International Nuclear Information System (INIS)

    Clark, T.G.

    2002-01-01

    In September 2000, the United States and the Russian Federation entered into an agreement which stipulates each country will irreversibly transform 34 metric tons of weapons-grade plutonium into material which could not be used for weapon purposes. Supporting the Department of Energy's (DOE) program to dispose of excess nuclear materials, the Pit Disassembly and Conversion Facility (PDCF) is being designed and constructed to disassemble the weapon ''pits'' and convert the nuclear material to an oxide form for fabrication into reactor fuel at the separate Mixed Oxide Fuel Fabrication Facility. The PDCF design incorporates automation to the maximum extent possible to facilitate material safeguards, reduce worker dose, and improve processing efficiency. This includes provisions for automated guided vehicle movements for shipping containers, material transport via automated conveyor between processes, remote process control monitoring, and automated Nondestructive Assay product systems

  12. Time scale algorithm: Definition of ensemble time and possible uses of the Kalman filter

    Science.gov (United States)

    Tavella, Patrizia; Thomas, Claudine

    1990-01-01

    The comparative study of two time scale algorithms, devised to satisfy different but related requirements, is presented. They are ALGOS(BIPM), producing the international reference TAI at the Bureau International des Poids et Mesures, and AT1(NIST), generating the real-time time scale AT1 at the National Institute of Standards and Technology. In each case, the time scale is a weighted average of clock readings, but the weight determination and the frequency prediction are different because they are adapted to different purposes. The possibility of using a mathematical tool, such as the Kalman filter, together with the definition of the time scale as a weighted average, is also analyzed. Results obtained by simulation are presented.

  13. Decoding the Mobility and Time Scales of Protein Loops.

    Science.gov (United States)

    Gu, Yina; Li, Da-Wei; Brüschweiler, Rafael

    2015-03-10

    The flexible nature of protein loops and the time scales of their dynamics are critical for many biologically important events at the molecular level, such as protein interaction and recognition processes. In order to obtain a predictive understanding of the dynamic properties of loops, 500 ns molecular dynamics (MD) computer simulations of 38 different proteins were performed and validated using NMR chemical shifts. A total of 169 loops were analyzed and classified into three types, namely fast loops with correlation times Web server (http://spin.ccic.ohio-state.edu/index.php/loop). The results demonstrate that loop dynamics with their time scales can be predicted rapidly with reasonable accuracy, which will allow the screening of average protein structures to help better understand the various roles loops can play in the context of protein-protein interactions and binding.

  14. Human learning: Power laws or multiple characteristic time scales?

    Directory of Open Access Journals (Sweden)

    Gottfried Mayer-Kress

    2006-09-01

    Full Text Available The central proposal of A. Newell and Rosenbloom (1981 was that the power law is the ubiquitous law of learning. This proposition is discussed in the context of the key factors that led to the acceptance of the power law as the function of learning. We then outline the principles of an epigenetic landscape framework for considering the role of the characteristic time scales of learning and an approach to system identification of the processes of performance dynamics. In this view, the change of performance over time is the product of a superposition of characteristic exponential time scales that reflect the influence of different processes. This theoretical approach can reproduce the traditional power law of practice – within the experimental resolution of performance data sets - but we hypothesize that this function may prove to be a special and perhaps idealized case of learning.

  15. Cognitive componets of speech at different time scales

    DEFF Research Database (Denmark)

    Feng, Ling; Hansen, Lars Kai

    2007-01-01

    that are essentially independent in a reasonable ensemble can be efficiently coded using a sparse independent component representation. The representations are indeed shown to be very similar between supervised learning (invoking cognitive activity) and unsupervised learning (statistical regularities), hence lending...... have earlier been revealed at multiple time scales corresponding to: phoneme, gender, height and speaker identity. We here show that the same simple unsupervised learning algorithm can detect these cues. Our basic features are 25-dimensional short time Mel-frequency weighted cepstral coefficients......Cognitive component analysis (COCA) is defined as unsupervised grouping of data leading to a group structure well aligned with that resulting from human cognitive activity. We focus here on speech at different time scales looking for possible hidden ‘cognitive structure’. Statistical regularities...

  16. Energy and time determine scaling in biological and computer designs

    Science.gov (United States)

    Bezerra, George; Edwards, Benjamin; Brown, James; Forrest, Stephanie

    2016-01-01

    Metabolic rate in animals and power consumption in computers are analogous quantities that scale similarly with size. We analyse vascular systems of mammals and on-chip networks of microprocessors, where natural selection and human engineering, respectively, have produced systems that minimize both energy dissipation and delivery times. Using a simple network model that simultaneously minimizes energy and time, our analysis explains empirically observed trends in the scaling of metabolic rate in mammals and power consumption and performance in microprocessors across several orders of magnitude in size. Just as the evolutionary transitions from unicellular to multicellular animals in biology are associated with shifts in metabolic scaling, our model suggests that the scaling of power and performance will change as computer designs transition to decentralized multi-core and distributed cyber-physical systems. More generally, a single energy–time minimization principle may govern the design of many complex systems that process energy, materials and information. This article is part of the themed issue ‘The major synthetic evolutionary transitions’. PMID:27431524

  17. Terrestrial carbon-nitrogen interactions across time-scales

    Science.gov (United States)

    Zaehle, Sönke; Sickel, Kerstin

    2017-04-01

    Through its role in forming amino acids, nitrogen (N) plays a fundamental role in terrestrial biogeochemistry, affecting for instance the photosynthetic rate of a leaf, and the amount of leaf area of a plant; with further consequences for quasi instantaneous terrestrial biophysical properties and fluxes. Because of the high energy requirements of transforming atmospheric N2 to biologically available form, N is generally thought to be limiting terrestrial productivity. Experimental evidence and modelling studies suggest that in temperate and boreal ecosystems, this N-"limitation" affects plant production at scales from days to decades, and potentially beyond. Whether these interactions play a role at longer timescales, such as during the transition from the last glacial maximum to the holocene, is currently unclear. To address this question, we present results from a 22000 years long simulation with dynamic global vegetation model including a comprehensive treatment of the terrestrial carbon and nitrogen balance and their interactions (using the OCN-DGVM) driven by monthly, transient climate forcing obtained from the CESM climate model (TRACE). OCN couples carbon and nitrogen processes at the time-scale of hours, but simulates a comprehensive nitrogen balance as well as vegetation dynamics with time-scales of centuries and beyond. We investigate in particular, whether (and at with time scale) carbon-nitrogen interactions cause important lags in the response of the terrestrial biosphere to changed climate, and which processes (such as altered N inputs from fixation or altered losses through leaching and denitrification) contribute to these lags.

  18. Earthquake magnitude time series: scaling behavior of visibility networks

    Science.gov (United States)

    Aguilar-San Juan, B.; Guzmán-Vargas, L.

    2013-11-01

    We present a statistical analysis of earthquake magnitude sequences in terms of the visibility graph method. Magnitude time series from Italy, Southern California, and Mexico are transformed into networks and some organizational graph properties are discussed. Connectivities are characterized by a scale-free distribution with a noticeable effect for large scales due to either the presence or the lack of large events. Also, a scaling behavior is observed between different node measures like betweenness centrality, clustering coefficient, nearest neighbor connectivity, and earthquake magnitude. Moreover, parameters which quantify the difference between forward and backward links, are proposed to evaluate the asymmetry of visibility attachment mechanism. Our results show an alternating average behavior of these parameters as earthquake magnitude changes. Finally, we evaluate the effects of reducing temporal and spatial windows of observation upon visibility network properties for main-shocks.

  19. Reconstructions of solar irradiance on centennial time scales

    Science.gov (United States)

    Krivova, Natalie; Solanki, Sami K.; Dasi Espuig, Maria; Kok Leng, Yeo

    Solar irradiance is the main external source of energy to Earth's climate system. The record of direct measurements covering less than 40 years is too short to study solar influence on Earth's climate, which calls for reconstructions of solar irradiance into the past with the help of appropriate models. An obvious requirement to a competitive model is its ability to reproduce observed irradiance changes, and a successful example of such a model is presented by the SATIRE family of models. As most state-of-the-art models, SATIRE assumes that irradiance changes on time scales longer than approximately a day are caused by the evolving distribution of dark and bright magnetic features on the solar surface. The surface coverage by such features as a function of time is derived from solar observations. The choice of these depends on the time scale in question. Most accurate is the version of the model that employs full-disc spatially-resolved solar magnetograms and reproduces over 90% of the measured irradiance variation, including the overall decreasing trend in the total solar irradiance over the last four cycles. Since such magnetograms are only available for about four decades, reconstructions on time scales of centuries have to rely on disc-integrated proxies of solar magnetic activity, such as sunspot areas and numbers. Employing a surface flux transport model and sunspot observations as input, we have being able to produce synthetic magnetograms since 1700. This improves the temporal resolution of the irradiance reconstructions on centennial time scales. The most critical aspect of such reconstructions remains the uncertainty in the magnitude of the secular change.

  20. Time scale of diffusion in molecular and cellular biology

    International Nuclear Information System (INIS)

    Holcman, D; Schuss, Z

    2014-01-01

    Diffusion is the driver of critical biological processes in cellular and molecular biology. The diverse temporal scales of cellular function are determined by vastly diverse spatial scales in most biophysical processes. The latter are due, among others, to small binding sites inside or on the cell membrane or to narrow passages between large cellular compartments. The great disparity in scales is at the root of the difficulty in quantifying cell function from molecular dynamics and from simulations. The coarse-grained time scale of cellular function is determined from molecular diffusion by the mean first passage time of molecular Brownian motion to a small targets or through narrow passages. The narrow escape theory (NET) concerns this issue. The NET is ubiquitous in molecular and cellular biology and is manifested, among others, in chemical reactions, in the calculation of the effective diffusion coefficient of receptors diffusing on a neuronal cell membrane strewn with obstacles, in the quantification of the early steps of viral trafficking, in the regulation of diffusion between the mother and daughter cells during cell division, and many other cases. Brownian trajectories can represent the motion of a molecule, a protein, an ion in solution, a receptor in a cell or on its membrane, and many other biochemical processes. The small target can represent a binding site or an ionic channel, a hidden active site embedded in a complex protein structure, a receptor for a neurotransmitter on the membrane of a neuron, and so on. The mean time to attach to a receptor or activator determines diffusion fluxes that are key regulators of cell function. This review describes physical models of various subcellular microdomains, in which the NET coarse-grains the molecular scale to a higher cellular-level, thus clarifying the role of cell geometry in determining subcellular function. (topical review)

  1. Cell assemblies at multiple time scales with arbitrary lag constellations.

    Science.gov (United States)

    Russo, Eleonora; Durstewitz, Daniel

    2017-01-11

    Hebb's idea of a cell assembly as the fundamental unit of neural information processing has dominated neuroscience like no other theoretical concept within the past 60 years. A range of different physiological phenomena, from precisely synchronized spiking to broadly simultaneous rate increases, has been subsumed under this term. Yet progress in this area is hampered by the lack of statistical tools that would enable to extract assemblies with arbitrary constellations of time lags, and at multiple temporal scales, partly due to the severe computational burden. Here we present such a unifying methodological and conceptual framework which detects assembly structure at many different time scales, levels of precision, and with arbitrary internal organization. Applying this methodology to multiple single unit recordings from various cortical areas, we find that there is no universal cortical coding scheme, but that assembly structure and precision significantly depends on the brain area recorded and ongoing task demands.

  2. The fission time scale measured with an atomic clock

    NARCIS (Netherlands)

    Kravchuk, VL; Wilschut, HW; Hunyadi, M; Kopecky, S; Lohner, H; Rogachevskiy, A; Siemssen, RH; Krasznahorkay, A; Hamilton, JH; Ramayya, AV; Carter, HK

    2003-01-01

    We present a new direct method of measuring the fission absolute time scale using an atomic clock based on the lifetime of a vacancy in the atomic K-shell. We studied the reaction Ne-20 + Th-232 -> O-16 + U-236* at 30 MeV/u. The excitation energy of about 115 MeV in such a reaction is in the range

  3. On transport phenomena and equilibration time scales in thermodenuders

    Directory of Open Access Journals (Sweden)

    R. Saleh

    2011-03-01

    Full Text Available This paper presents a theoretical and experimental investigation of thermodenuders that addresses two controversial issues: (1 equilibration time scales and (2 the need for an activated carbon (AC denuder in the cooling section. We describe a plug flow model for transport phenomena in a TD, which can be used to simulate the rate of vapor build-up in the gas phase and the corresponding change in particle size distribution. Model simulations were found to have excellent agreement with experiments performed with pure and mixed dicarboxylic acid aerosols. Both simulations and experiments showed that the aerosols approached equilibrium within reasonable residence times (15 s–30 s for aerosol concentrations and size distributions typical for laboratory measurements, and that volatility studies at sufficiently high aerosol loadings, therefore, need not resort to kinetic models for inference of thermodynamic properties. However, for size distributions relevant for ambient aerosols, equilibration time scales were much larger than residence times available with current TD designs. We have also performed dimensional analysis on the problem of equilibration in TDs, and derived a dimensionless equilibration parameter which can be used to determine the residence time needed for an aerosol of given size distribution and kinetic properties to approach equilibrium. It is also shown theoretically and empirically that aerosol volatility has no effect on the equilibration time scales. Model simulations and experiments showed that with aerosol size distributions relevant to both ambient and laboratory measurements re-condensation in the cooling section, with and without an AC denuder, was negligible. Thus, there is no significant benefit in using an AC denuder in the cooling section. Due to the risk of stripping volatile material from the aerosol, the use of AC denuders in the cooling section should be avoided. Finally, we present a rationale for why ΔC is

  4. Biogenic Calcium Phosphate Transformation in Soils over Millennium Time Scales

    Energy Technology Data Exchange (ETDEWEB)

    Sato, S.; Neves, E; Solomon, D; Liang, B; Lehmann, J

    2009-01-01

    Changes in bioavailability of phosphorus (P) during pedogenesis and ecosystem development have been shown for geogenic calcium phosphate (Ca-P). However, very little is known about long-term changes of biogenic Ca-P in soil. Long-term transformation characteristics of biogenic Ca-P were examined using anthropogenic soils along a chronosequence from centennial to millennial time scales. Phosphorus fractionation of Anthrosols resulted in overall consistency with the Walker and Syers model of geogenic Ca-P transformation during pedogenesis. The biogenic Ca-P (e.g., animal and fish bones) disappeared to 3% of total P within the first ca. 2,000 years of soil development. This change concurred with increases in P adsorbed on metal-oxides surfaces, organic P, and occluded P at different pedogenic time. Phosphorus K-edge X-ray absorption near-edge structure (XANES) spectroscopy revealed that the crystalline and therefore thermodynamically most stable biogenic Ca-P was transformed into more soluble forms of Ca-P over time. While crystalline hydroxyapatite (34% of total P) dominated Ca-P species after about 600-1,000 years, {Beta}-tricalcium phosphate increased to 16% of total P after 900-1,100 years, after which both Ca-P species disappeared. Iron-associated P was observable concurrently with Ca-P disappearance. Soluble P and organic P determined by XANES maintained relatively constant (58-65%) across the time scale studied. Conclusions - Disappearance of crystalline biogenic Ca-P on a time scale of a few thousand years appears to be ten times faster than that of geogenic Ca-P.

  5. Diffusion time scales and accretion in the sun

    International Nuclear Information System (INIS)

    Michaud, G.

    1977-01-01

    It is thought that surface abundances in the Sun could be due largely to accretion either of comets or grains, and it has been suggested that if surface convection zones were smaller than is usually indicated by model calculations, accretion would be especially important. Unless the zone immediately below the surface convection zone is sufficiently stable for diffusion to be important, other transport processes, such as turbulence and meridional circulation, more efficient than diffusion, will tend to homogenise the Sun. Diffusion is the slowest of the transport processes and will become important when other transport processes become inoperative. Using diffusion theory the minimum mass of the convection zone can be determined in order that transport processes at the bottom of the zone are not to influence abundances in the convection zone. If diffusion time scales are shorter than the life of the star (Sun) diffusion will modify the abundances in the convection zone. The mass in the convection zone for which diffusion time scales are equal to the life of the star on the main sequence then determines the minimum mass in the convection zone that justifies neglect of transport processes at the bottom of the convection zone. It is calculated here that, for the Sun, this mass is between 3 x 10 -3 and 10 -2 solar mass, and a general explosion is derived for the diffusion time scale as a function of the mass of the convection zone. (U.K.)

  6. Backpropagation and ordered derivatives in the time scales calculus.

    Science.gov (United States)

    Seiffertt, John; Wunsch, Donald C

    2010-08-01

    Backpropagation is the most widely used neural network learning technique. It is based on the mathematical notion of an ordered derivative. In this paper, we present a formulation of ordered derivatives and the backpropagation training algorithm using the important emerging area of mathematics known as the time scales calculus. This calculus, with its potential for application to a wide variety of inter-disciplinary problems, is becoming a key area of mathematics. It is capable of unifying continuous and discrete analysis within one coherent theoretical framework. Using this calculus, we present here a generalization of backpropagation which is appropriate for cases beyond the specifically continuous or discrete. We develop a new multivariate chain rule of this calculus, define ordered derivatives on time scales, prove a key theorem about them, and derive the backpropagation weight update equations for a feedforward multilayer neural network architecture. By drawing together the time scales calculus and the area of neural network learning, we present the first connection of two major fields of research.

  7. Atomistic simulations of graphite etching at realistic time scales.

    Science.gov (United States)

    Aussems, D U B; Bal, K M; Morgan, T W; van de Sanden, M C M; Neyts, E C

    2017-10-01

    Hydrogen-graphite interactions are relevant to a wide variety of applications, ranging from astrophysics to fusion devices and nano-electronics. In order to shed light on these interactions, atomistic simulation using Molecular Dynamics (MD) has been shown to be an invaluable tool. It suffers, however, from severe time-scale limitations. In this work we apply the recently developed Collective Variable-Driven Hyperdynamics (CVHD) method to hydrogen etching of graphite for varying inter-impact times up to a realistic value of 1 ms, which corresponds to a flux of ∼10 20 m -2 s -1 . The results show that the erosion yield, hydrogen surface coverage and species distribution are significantly affected by the time between impacts. This can be explained by the higher probability of C-C bond breaking due to the prolonged exposure to thermal stress and the subsequent transition from ion- to thermal-induced etching. This latter regime of thermal-induced etching - chemical erosion - is here accessed for the first time using atomistic simulations. In conclusion, this study demonstrates that accounting for long time-scales significantly affects ion bombardment simulations and should not be neglected in a wide range of conditions, in contrast to what is typically assumed.

  8. [Assessing drug targeting of Yougui Pill, Zuogui Pill, and their disassembled prescriptions using infrared thermography].

    Science.gov (United States)

    Zheng, Xia; Deng, Yan-Li; Li, Qi-Jia; Lu, Hua

    2014-04-01

    To dynamically assess drug targeting of Yougui Pill (YP) and Zuogui Pill (ZP) using infrared thermography. In this self-control experiment, five healthy volunteers were recruited. By using infrared thermography 10 to 11 thermal images of different body locations were taken from each participant after they took warm water, YP, ZP, and their dissembled prescriptions at 30, 70, 100, 130, and 160 min, respectively. The heat values in the lower quadrant abdomen, uterus, Du channel, and Shenque (CV8) were statistically analyzed after scanning for 125 times. Administration of YP and its disassembled prescriptions enhanced the heat value of the locations of the Du channel and Shenque (CV8), but did no enhance the heat value of the lower quadrant abdomen at 30 min. Administration of ZP and its disassembled prescriptions reduced the heat value in the locations of the lower quadrant abdomen, uterus, Du channel, and Shenque (CV8) at each time point. The drug targeting of ZP and YP focused on the locations of the Du channel and Shenque (CV8), not on the locations of the lower quadrant abdomen or uterus.

  9. Stability theory for dynamic equations on time scales

    CERN Document Server

    Martynyuk, Anatoly A

    2016-01-01

    This monograph is a first in the world to present three approaches for stability analysis of solutions of dynamic equations. The first approach is based on the application of dynamic integral inequalities and the fundamental matrix of solutions of linear approximation of dynamic equations. The second is based on the generalization of the direct Lyapunovs method for equations on time scales, using scalar, vector and matrix-valued auxiliary functions. The third approach is the application of auxiliary functions (scalar, vector, or matrix-valued ones) in combination with differential dynamic inequalities. This is an alternative comparison method, developed for time continuous and time discrete systems. In recent decades, automatic control theory in the study of air- and spacecraft dynamics and in other areas of modern applied mathematics has encountered problems in the analysis of the behavior of solutions of time continuous-discrete linear and/or nonlinear equations of perturbed motion. In the book “Men of Ma...

  10. Scale and time dependence of serial correlations in word-length time series of written texts

    Science.gov (United States)

    Rodriguez, E.; Aguilar-Cornejo, M.; Femat, R.; Alvarez-Ramirez, J.

    2014-11-01

    This work considered the quantitative analysis of large written texts. To this end, the text was converted into a time series by taking the sequence of word lengths. The detrended fluctuation analysis (DFA) was used for characterizing long-range serial correlations of the time series. To this end, the DFA was implemented within a rolling window framework for estimating the variations of correlations, quantified in terms of the scaling exponent, strength along the text. Also, a filtering derivative was used to compute the dependence of the scaling exponent relative to the scale. The analysis was applied to three famous English-written literary narrations; namely, Alice in Wonderland (by Lewis Carrol), Dracula (by Bram Stoker) and Sense and Sensibility (by Jane Austen). The results showed that high correlations appear for scales of about 50-200 words, suggesting that at these scales the text contains the stronger coherence. The scaling exponent was not constant along the text, showing important variations with apparent cyclical behavior. An interesting coincidence between the scaling exponent variations and changes in narrative units (e.g., chapters) was found. This suggests that the scaling exponent obtained from the DFA is able to detect changes in narration structure as expressed by the usage of words of different lengths.

  11. Predictability of 2-m temperature across space and time scales

    Science.gov (United States)

    Haiden, Thomas; Ben Bouallegue, Zied

    2017-04-01

    In the extra-tropics, 2-m temperature is arguably one of the most important parameters provided by weather forecasts. Although the skill of 2-m temperature forecasts from numerical weather prediction (NWP) models is slowly increasing, major issues remain. One of the main sources of uncertainty in the short range relates to difficulties in predicting the amount of vertical mixing in very stable boundary layers and associated uncertainties in the low cloudiness forecast. During the convective season, uncertainties in the timing and location of precipitation limit 2-m temperature forecast skill. Here we evaluate NWP model output from the TIGGE dataset against global SYNOP observations to evaluate the current level of 2-m temperature skill as a function of spatial and temporal scale for both deterministic and probabilistic forecasts. By comparing different types of verification metrics such as the generalized discrimination score, anomaly correlation, root mean square error, and mean error we can quantify predictability separately from representativeness errors and conditional biases. Spatial aggregation from the grid-box to the synoptic scale is performed to assess the contribution of synoptic-scale uncertainty on the 2-m temperature error at different lead times from the short range through the medium and extended range. Results allow inferences to be made about possible future improvements in the 2-m temperature forecast associated with improved model physics and spatial resolution.

  12. The Role of Time-Scales in Socio-hydrology

    Science.gov (United States)

    Blöschl, Günter; Sivapalan, Murugesu

    2016-04-01

    Much of the interest in hydrological modeling in the past decades revolved around resolving spatial variability. With the rapid changes brought about by human impacts on the hydrologic cycle, there is now an increasing need to refocus on time dependency. We present a co-evolutionary view of hydrologic systems, in which every part of the system including human systems, co-evolve, albeit at different rates. The resulting coupled human-nature system is framed as a dynamical system, characterized by interactions of fast and slow time scales and feedbacks between environmental and social processes. This gives rise to emergent phenomena such as the levee effect, adaptation to change and system collapse due to resource depletion. Changing human values play a key role in the emergence of these phenomena and should therefore be considered as internal to the system in a dynamic way. The co-evolutionary approach differs from the traditional view of water resource systems analysis as it allows for path dependence, multiple equilibria, lock-in situations and emergent phenomena. The approach may assist strategic water management for long time scales through facilitating stakeholder participation, exploring the possibility space of alternative futures, and helping to synthesise the observed dynamics of different case studies. Future research opportunities include the study of how changes in human values are connected to human-water interactions, historical analyses of trajectories of system co-evolution in individual places and comparative analyses of contrasting human-water systems in different climate and socio-economic settings. Reference Sivapalan, M. and G. Blöschl (2015) Time scale interactions and the coevolution of humans and water. Water Resour. Res., 51, 6988-7022, doi:10.1002/2015WR017896.

  13. Multi-Scale Dissemination of Time Series Data

    DEFF Research Database (Denmark)

    Guo, Qingsong; Zhou, Yongluan; Su, Li

    2013-01-01

    In this paper, we consider the problem of continuous dissemination of time series data, such as sensor measurements, to a large number of subscribers. These subscribers fall into multiple subscription levels, where each subscription level is specified by the bandwidth constraint of a subscriber......, which is an abstract indicator for both the physical limits and the amount of data that the subscriber would like to handle. To handle this problem, we propose a system framework for multi-scale time series data dissemination that employs a typical tree-based dissemination network and existing time...... to optimize the average accuracies of the data received by all subscribers within the dissemination network. Finally, we have conducted extensive experiments to study the performance of the algorithms....

  14. Decay of surface nanostructures via long-time-scale dynamics

    International Nuclear Information System (INIS)

    Voter, A.F.; Stanciu, N.

    1998-01-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The authors have developed a new approach for extending the time scale of molecular dynamics simulations. For infrequent-event systems, the category that includes most diffusive events in the solid phase, this hyperdynamics method can extend the simulation time by a few orders of magnitude compared to direct molecular dynamics. The trajectory is run on a potential surface that has been biased to raise the energy in the potential basins without affecting the transition state region. The method is described and applied to surface and bulk diffusion processes, achieving microsecond and millisecond simulation times. The authors have also developed a new parallel computing method that is efficient for small system sizes. The combination of the hyperdynamics with this parallel replica dynamics looks promising as a general materials simulation tool

  15. Spent fuel disassembly and canning programs at the Barnwell Nuclear Fuel Plant (BNFP)

    International Nuclear Information System (INIS)

    Townes III, G.A.

    1980-10-01

    Methods of disassembling and canning spent fuel to allow more efficient storage are being investigated at the BNFP. Studies and development programs are aimed at dry disassembly of fuel to allow storage and shipment of fuel pins rather than complete fuel assemblies. Results indicate that doubling existing storage capacity or tripling the carrying capacity of existing transportation equipment is achievable. Disassembly could be performed in the BNFP hot cells at rates of about 12 to 15 assemblies per day

  16. Application of industrial robots in automatic disassembly line of waste LCD displays

    Science.gov (United States)

    Wang, Sujuan

    2017-11-01

    In the automatic disassembly line of waste LCD displays, LCD displays are disassembled into plastic shells, metal shields, circuit boards, and LCD panels. Two industrial robots are used to cut metal shields and remove circuit boards in this automatic disassembly line. The functions of these two industrial robots, and the solutions to the critical issues of model selection, the interfaces with PLCs and the workflows were described in detail in this paper.

  17. Parameterization of cosmological scale factor during inflationary times

    International Nuclear Information System (INIS)

    Wahba, R.R.

    1989-01-01

    The inflationary period is modeled by generating a cosmological function, lambda(t), that depends on a period of exponential growth followed by a period of exponential decay. The model is equivalent to a single thermodynamic phase change and exhibits all the required features of an inflationary period such as exponential growth of the scale factor plus a natural relaxation (graceful exit) of lambda to the present day cosmological constant. After constraining the model to conditions imposed, by the inflationary hypothesis, a numerical computation is performed over the time period from the Planck time to the beginning of the radiation era. As a result of the constraints on the model, the presence of a very large negative Planckian cosmological constant was found. It was also found that the present-day value of this function, albeit small, is nevertheless positive. Using this model, the growth of the cosmological scale factor R(lambda) was found as a parameterized function of the cosmological function. It is shown that the numerical integration is greatly simplified if the multivalued function is solved. Not only does this greatly simplify the calculation, it shows that the parameterization of the scale factor in terms of the cosmological function is useful. Results are presented in a series of graphs. How the model could be related to either a Grand Unified theory or a quantum mechanical model of inflation in terms of the rate of production and decay of a (massive) X particle created by the initial instability of the vacuum at the planck time is discussed. It is further suggested that the cosmological function provides direct information about the decay rate (and hence the mass) of this X particle

  18. Least-rattling feedback from strong time-scale separation

    Science.gov (United States)

    Chvykov, Pavel; England, Jeremy

    2018-03-01

    In most interacting many-body systems associated with some "emergent phenomena," we can identify subgroups of degrees of freedom that relax on dramatically different time scales. Time-scale separation of this kind is particularly helpful in nonequilibrium systems where only the fast variables are subjected to external driving; in such a case, it may be shown through elimination of fast variables that the slow coordinates effectively experience a thermal bath of spatially varying temperature. In this paper, we investigate how such a temperature landscape arises according to how the slow variables affect the character of the driven quasisteady state reached by the fast variables. Brownian motion in the presence of spatial temperature gradients is known to lead to the accumulation of probability density in low-temperature regions. Here, we focus on the implications of attraction to low effective temperature for the long-term evolution of slow variables. After quantitatively deriving the temperature landscape for a general class of overdamped systems using a path-integral technique, we then illustrate in a simple dynamical system how the attraction to low effective temperature has a fine-tuning effect on the slow variable, selecting configurations that bring about exceptionally low force fluctuation in the fast-variable steady state. We furthermore demonstrate that a particularly strong effect of this kind can take place when the slow variable is tuned to bring about orderly, integrable motion in the fast dynamics that avoids thermalizing energy absorbed from the drive. We thus point to a potentially general feedback mechanism in multi-time-scale active systems, that leads to the exploration of slow variable space, as if in search of fine tuning for a "least-rattling" response in the fast coordinates.

  19. Remote examination and disassembly of a biomedical target at LASL

    International Nuclear Information System (INIS)

    Cook, J.H.; Newbury, F.H.; Shaffer, D.S.

    1978-01-01

    Group CMB-14 at the Los Alamos Scientific Laboratory examines a failed water-cooled biomedical pion-production target used in the Los Alamos Meson Physics Facility. The target had developed a water leak during service. During investigation of the failure, the target was pressurized in water first to locate the leak generally and second to pinpoint it after the target was partially disassembled. Samples from the target were examined by a metallograph, a scanning electron microscope, an electron and an ion microprobe, and an x-ray diffractometer

  20. Cross-Scale Modelling of Subduction from Minute to Million of Years Time Scale

    Science.gov (United States)

    Sobolev, S. V.; Muldashev, I. A.

    2015-12-01

    Subduction is an essentially multi-scale process with time-scales spanning from geological to earthquake scale with the seismic cycle in-between. Modelling of such process constitutes one of the largest challenges in geodynamic modelling today.Here we present a cross-scale thermomechanical model capable of simulating the entire subduction process from rupture (1 min) to geological time (millions of years) that employs elasticity, mineral-physics-constrained non-linear transient viscous rheology and rate-and-state friction plasticity. The model generates spontaneous earthquake sequences. The adaptive time-step algorithm recognizes moment of instability and drops the integration time step to its minimum value of 40 sec during the earthquake. The time step is then gradually increased to its maximal value of 5 yr, following decreasing displacement rates during the postseismic relaxation. Efficient implementation of numerical techniques allows long-term simulations with total time of millions of years. This technique allows to follow in details deformation process during the entire seismic cycle and multiple seismic cycles. We observe various deformation patterns during modelled seismic cycle that are consistent with surface GPS observations and demonstrate that, contrary to the conventional ideas, the postseismic deformation may be controlled by viscoelastic relaxation in the mantle wedge, starting within only a few hours after the great (M>9) earthquakes. Interestingly, in our model an average slip velocity at the fault closely follows hyperbolic decay law. In natural observations, such deformation is interpreted as an afterslip, while in our model it is caused by the viscoelastic relaxation of mantle wedge with viscosity strongly varying with time. We demonstrate that our results are consistent with the postseismic surface displacement after the Great Tohoku Earthquake for the day-to-year time range. We will also present results of the modeling of deformation of the

  1. Phosphorylation and disassembly of intermediate filaments in mitotic cells

    International Nuclear Information System (INIS)

    Chou, Yinghao; Rosevear, E.; Goldman, R.D.

    1989-01-01

    As baby hamster kidney (BHK-21) cells enter mitosis, networks of intermediate filaments (IFs) are transformed into cytoplasmic aggregates of protofilaments. Coincident with this morphological change, the phosphate content of vimentin increases from 0.3 mol of P i per mol of protein in interphase to 1.9 mol of P i per mol of protein in mitosis. A similar increase in phosphate content is observed with desmin, from 0.5 mol of P i per mol of protein to 1.5 mol of P i per mol of protein. Fractionation of mitotic cell lysates by hydroxylapatite column chromatography reveals the presence of two IF protein kinase activities, designated as IF protein kinase I and IF protein kinase II. Comparison of two-dimensional 32 P-labeled phosphopeptide maps of vimentin and desmin phosphorylated in vivo in mitosis, and in vitro using partially purified kinase fractions, reveals extensive similarity in the two sets of phosphorylation sites. Phosphorylation of in vitro polymerized IFs by IF protein kinase II induces complete disassembly as determined by negative-stain electron microscopy. The results support the idea that the disassembly of IFs in mitosis is regulated by the phosphorylation of its subunit proteins

  2. ARIES pit disassembly-safeguards issues for transparency

    International Nuclear Information System (INIS)

    Fearey, B.L.; Cremers, T.L.

    1995-01-01

    Historic changes are now occurring in U.S. nonproliferation and arms control policy. The quantity of nuclear weapons required to provide a deterrence has decreased (especially with the end of the Cold War). Further, various bilateral and multilateral treaties now require the removal of numerous nuclear weapons from the U.S. stockpile. Although the removal of such weapons appears straightforward, the final disposition of the surplus weapons-grade nuclear material must be carefully considered. Domestically, several plutonium disposition plans are now under consideration concerning long-term safety, materials accounting, environmental impact, accessibility, and long-term containment. The Automated Retirement and Integrated Extraction System (ARIES) currently under development at Los Alamos National Laboratory is one such disposition method for the disassembly of plutonium weapons components (pits). The ARIES system integrates and automates several features: disassembly of pits, consolidation of the plutonium material, on-line measurement of final products, waste streams, and long-term packaging. Clearly, in any plutonium disposition plan, the safeguards aspects of materials control and accounting and the security aspects must be carefully considered and evaluated

  3. Prewhitening of hydroclimatic time series? Implications for inferred change and variability across time scales

    Science.gov (United States)

    Razavi, Saman; Vogel, Richard

    2018-02-01

    Prewhitening, the process of eliminating or reducing short-term stochastic persistence to enable detection of deterministic change, has been extensively applied to time series analysis of a range of geophysical variables. Despite the controversy around its utility, methodologies for prewhitening time series continue to be a critical feature of a variety of analyses including: trend detection of hydroclimatic variables and reconstruction of climate and/or hydrology through proxy records such as tree rings. With a focus on the latter, this paper presents a generalized approach to exploring the impact of a wide range of stochastic structures of short- and long-term persistence on the variability of hydroclimatic time series. Through this approach, we examine the impact of prewhitening on the inferred variability of time series across time scales. We document how a focus on prewhitened, residual time series can be misleading, as it can drastically distort (or remove) the structure of variability across time scales. Through examples with actual data, we show how such loss of information in prewhitened time series of tree rings (so-called "residual chronologies") can lead to the underestimation of extreme conditions in climate and hydrology, particularly droughts, reconstructed for centuries preceding the historical period.

  4. Dynamic Leidenfrost Effect: Relevant Time and Length Scales

    Science.gov (United States)

    Shirota, Minori; van Limbeek, Michiel A. J.; Sun, Chao; Prosperetti, Andrea; Lohse, Detlef

    2016-02-01

    When a liquid droplet impacts a hot solid surface, enough vapor may be generated under it to prevent its contact with the solid. The minimum solid temperature for this so-called Leidenfrost effect to occur is termed the Leidenfrost temperature, or the dynamic Leidenfrost temperature when the droplet velocity is non-negligible. We observe the wetting or drying and the levitation dynamics of the droplet impacting on an (isothermal) smooth sapphire surface using high-speed total internal reflection imaging, which enables us to observe the droplet base up to about 100 nm above the substrate surface. By this method we are able to reveal the processes responsible for the transitional regime between the fully wetting and the fully levitated droplet as the solid temperature increases, thus shedding light on the characteristic time and length scales setting the dynamic Leidenfrost temperature for droplet impact on an isothermal substrate.

  5. BOX-COX REGRESSION METHOD IN TIME SCALING

    Directory of Open Access Journals (Sweden)

    ATİLLA GÖKTAŞ

    2013-06-01

    Full Text Available Box-Cox regression method with λj, for j = 1, 2, ..., k, power transformation can be used when dependent variable and error term of the linear regression model do not satisfy the continuity and normality assumptions. The situation obtaining the smallest mean square error  when optimum power λj, transformation for j = 1, 2, ..., k, of Y has been discussed. Box-Cox regression method is especially appropriate to adjust existence skewness or heteroscedasticity of error terms for a nonlinear functional relationship between dependent and explanatory variables. In this study, the advantage and disadvantage use of Box-Cox regression method have been discussed in differentiation and differantial analysis of time scale concept.

  6. Flexoelectricity and competition of time scales in electroconvection.

    Science.gov (United States)

    Tóth-Katona, Tibor; Eber, Nándor; Buka, Agnes; Krekhov, Alexei

    2008-09-01

    An unexpected type of behavior in electroconvection (EC) has been detected in nematic liquid crystals (NLCs) under the condition of comparable time scales of the director relaxation and the period of the driving ac voltage. The studied NLCs exhibit standard EC (s-EC) at the onset of the instability, except one compound in which nonstandard EC (ns-EC) has been detected. In the relevant frequency region, the threshold voltage for conductive s-EC bends down considerably, while for dielectric s-EC it bends up strongly with the decrease of the driving frequency. We show that inclusion of the flexoelectric effect into the theoretical description of conductive s-EC leads to quantitative agreement, while for dielectric s-EC a qualitative agreement is achieved. The frequency dependence of the threshold voltage for ns-EC strongly resembles that of the dielectric s-EC.

  7. The effect of photosynthesis time scales on microalgae productivity.

    Science.gov (United States)

    Hartmann, Philipp; Béchet, Quentin; Bernard, Olivier

    2014-01-01

    Microalgae are often seen as a potential biofuel producer. In order to predict achievable productivities in the so called raceway culturing system, the dynamics of photosynthesis has to be taken into account. In particular, the dynamical effect of inhibition by an excess of light (photoinhibition) must be represented. We propose a model considering both photosynthesis and growth dynamics. This model involves three different time scales. We study the response of this model to fluctuating light with different frequencies by slow/fast approximations. Therefore, we identify three different regimes for which a simplified expression for the model can be derived. These expressions give a hint on productivity improvement which can be expected by stimulating photosynthesis with a faster hydrodynamics.

  8. Towards a stable numerical time scale for the early Paleogene

    Science.gov (United States)

    Hilgen, Frederik; Kuiper, Klaudia; Sierro, Francisco J.; Wotzlaw, Jorn; Schaltegger, Urs; Sahy, Diana; Condon, Daniel

    2014-05-01

    The construction of an astronomical time scale for the early Paleogene is hampered by ambiguities in the number, correlation and tuning of 405-kyr eccentricity related cycles in deep marine records from ODP cores and land-based sections. The two most competing age models result in astronomical ages for the K/Pg boundary that differ by ~750 kyr (~66.0 Ma of Vandenberghe et al. (2012) versus 65.25 Ma of Westerhold et al. (2012); these ages in turn are consistent with proposed ages for the Fish Canyon sanidine (FCs) that differ by ~300 kyr (28.201 Ma of Kuiper et al. (2008) versus 27.89 Ma of Westerhold et al. (2012)); an even older age of 28.294 Ma is proposed based on a statistical optimization model (Renne et al., 2011). The astronomically calibrated FCs age of 28.201 ± 0.046 Ma of Kuiper et al. (2008), which is consistent with the astronomical age of ~66.0 Ma for the K/Pg boundary, is currently adopted in the standard geological time scale (GTS2012). Here we combine new and published data in an attempt to solve the controversy and arrive at a stable nuemrical time scale for the early Paleogene. Supporting their younger age model, Westerhold et al. (2012) argue that the tuning of Miocene sections in the Mediterranean, which underlie the older FCs age of Kuiper et al. (2008) and, hence, the coupled older early Paleogene age model of Vandenberghe et al. (2012), might be too old by three precession cycles. We thoroughly rechecked this tuning; distinctive cycle patterns related to eccentricity and precession-obliquity interference make a younger tuning that would be consistent with the younger astronomical age of 27.89 Ma for the FCs of Westerhold et al. (2012) challenging. Next we compared youngest U/Pb zircon and astronomical ages for a number of ash beds in the tuned Miocene section of Monte dei Corvi. These ages are indistinguishable, indicating that the two independent dating methods yield the same age when the same event is dated. This is consistent with results

  9. Coordination of substrate binding and ATP hydrolysis in Vps4-mediated ESCRT-III disassembly.

    Science.gov (United States)

    Davies, Brian A; Azmi, Ishara F; Payne, Johanna; Shestakova, Anna; Horazdovsky, Bruce F; Babst, Markus; Katzmann, David J

    2010-10-01

    ESCRT-III undergoes dynamic assembly and disassembly to facilitate membrane exvagination processes including multivesicular body (MVB) formation, enveloped virus budding, and membrane abscission during cytokinesis. The AAA-ATPase Vps4 is required for ESCRT-III disassembly, however the coordination of Vps4 ATP hydrolysis with ESCRT-III binding and disassembly is not understood. Vps4 ATP hydrolysis has been proposed to execute ESCRT-III disassembly as either a stable oligomer or an unstable oligomer whose dissociation drives ESCRT-III disassembly. An in vitro ESCRT-III disassembly assay was developed to analyze Vps4 function during this process. The studies presented here support a model in which Vps4 acts as a stable oligomer during ATP hydrolysis and ESCRT-III disassembly. Moreover, Vps4 oligomer binding to ESCRT-III induces coordination of ATP hydrolysis at the level of individual Vps4 subunits. These results suggest that Vps4 functions as a stable oligomer that acts upon individual ESCRT-III subunits to facilitate ESCRT-III disassembly.

  10. Continent-scale global change attribution in European birds - combining annual and decadal time scales

    DEFF Research Database (Denmark)

    Jørgensen, Peter Søgaard; Böhning-Gaese, Katrin; Thorup, Kasper

    2016-01-01

    foundation for attributing species responses to global change may be achieved by complementing an attributes-based approach by one estimating the relationship between repeated measures of organismal and environmental changes over short time scales. To assess the benefit of this multiscale perspective, we......Species attributes are commonly used to infer impacts of environmental change on multiyear species trends, e.g. decadal changes in population size. However, by themselves attributes are of limited value in global change attribution since they do not measure the changing environment. A broader...... investigate the recent impact of multiple environmental changes on European farmland birds, here focusing on climate change and land use change. We analyze more than 800 time series from 18 countries spanning the past two decades. Analysis of long-term population growth rates documents simultaneous responses...

  11. The pace of aging: Intrinsic time scales in demography

    Directory of Open Access Journals (Sweden)

    Tomasz Wrycza

    2014-05-01

    Full Text Available Background: The pace of aging is a concept that captures the time-related aspect of aging. It formalizesthe idea of a characteristic life span or intrinsic population time scale. In the rapidly developing field of comparative biodemography, measures that account for inter-speciesdifferences in life span are needed to compare how species age. Objective: We aim to provide a mathematical foundation for the concept of pace. We derive desiredmathematical properties of pace measures and suggest candidates which satisfy these properties. Subsequently, we introduce the concept of pace-standardization, which reveals differences in demographic quantities that are not due to pace. Examples and consequences are discussed. Conclusions: Mean life span (i.e., life expectancy from birth or from maturity is intuitively appealing,theoretically justified, and the most appropriate measure of pace. Pace-standardizationprovides a serviceable method for comparative aging studies to explore differences indemographic patterns of aging across species, and it may considerably alter conclusionsabout the strength of aging.

  12. An Entropy-Based Adaptive Hybrid Particle Swarm Optimization for Disassembly Line Balancing Problems

    Directory of Open Access Journals (Sweden)

    Shanli Xiao

    2017-11-01

    Full Text Available In order to improve the product disassembly efficiency, the disassembly line balancing problem (DLBP is transformed into a problem of searching for the optimum path in the directed and weighted graph by constructing the disassembly hierarchy information graph (DHIG. Then, combining the characteristic of the disassembly sequence, an entropy-based adaptive hybrid particle swarm optimization algorithm (AHPSO is presented. In this algorithm, entropy is introduced to measure the changing tendency of population diversity, and the dimension learning, crossover and mutation operator are used to increase the probability of producing feasible disassembly solutions (FDS. Performance of the proposed methodology is tested on the primary problem instances available in the literature, and the results are compared with other evolutionary algorithms. The results show that the proposed algorithm is efficient to solve the complex DLBP.

  13. Knowledge of damage identification about tensegrities via flexibility disassembly

    Science.gov (United States)

    Jiang, Ge; Feng, Xiaodong; Du, Shigui

    2017-12-01

    Tensegrity structures composing of continuous cables and discrete struts are under tension and compression, respectively. In order to determine the damage extents of tensegrity structures, a new method for tensegrity structural damage identification is presented based on flexibility disassembly. To decompose a tensegrity structural flexibility matrix into the matrix represention of the connectivity between degress-of-freedoms and the diagonal matrix comprising of magnitude informations. Step 1: Calculate perturbation flexibility; Step 2: Compute the flexibility connectivity matrix and perturbation flexibility parameters; Step 3: Calculate the perturbation stiffness parameters. The efficiency of the proposed method is demonstrated by a numeical example comprising of 12 cables and 4 struts with pretensioned. Accurate identification of local damage depends on the availability of good measured data, an accurate and reasonable algorithm.

  14. Maintenance and disassembly considerations for the Technology Demonstration Facility

    International Nuclear Information System (INIS)

    Spampinato, P.T.

    1983-01-01

    The Technology Demonstration Facility (TDF) is a tandem mirror design concept carried out under the direction of Lawrence Livermore National Laboratory. It was conceived as a near-term device with a mission of developing engineering technology in a D-T fusion environment. Overall maintenance and component disassembly were among the responsibilities of the Fusion Engineering Design Center (FEDC). A configuration evolved that was based on the operational requirements of the components, as well as the requirements for their replacements. Component lifetime estimates were used to estimate the frequency and the number of replacements. In addition, it was determined that the need for remote handling equipment followed within 1.5 years after initial start-up, emphasizing the direct relationship between developing maintenance scenarios/equipment and the device configuration. Many of the scheduled maintenance operations were investigated to first order, and preliminary handling equipment concepts were developed

  15. Workshop on instrumentation of the disassembled BER II

    International Nuclear Information System (INIS)

    Jauch, W.; Steiner, M.

    1982-01-01

    A workshop on the instrumentation of a disassembled BER II-reactor took place in the Hahn-Meitner-Institute in Berlin on April 19 and 20, 1982. Invited were all groups that are promoted by the associations 'Neutron Scattering for Investigation of Condensed Substance' and 'Neutron Scattering and Complementary Methods in Chemistry and Biology', along with experts for neutron spectrometers. 40 foreign scientists from 22 different institutes had accepted the invitation. The actual questions were treated in 13 presentations and a certain number of posters, with the latter also comprising activation analysis. The present report contains the presentations submitted, the final discussion minutes and a summary from HMI-view. (orig./RW) [de

  16. Maintenance and disassembly considerations for the Technology Demonstration Facility

    International Nuclear Information System (INIS)

    Spampinato, P.T.

    1983-01-01

    The Technology Demonstration Facility (TDF) is a tandem-mirror design concept carried out under the direction of Lawrence Livermore National Laboratory. It was conceived as a near-term device with a mission of developing engineering technology in a D-T fusion environment. Overall maintenance and component disassembly were among the responsibilities of the Fusion Engineering Design Center (FEDC). A configuration evolved that was based on the operational requirements of the components, as well as the requirements for their replacements. Component lifetime estimates were used to estimate the frequency and the number of replacements. In addition, it was determined that the need for remote handling equipment followed within 1.5 years after initial start-up, emphasizing the direct relationship between developing maintenance scenarios/equipment and the device configuration. Many of the scheduled maintenance operations were investigated to first order, and preliminary handling equipment concepts were developed

  17. Ozone time scale decomposition and trend assessment from surface observations

    Science.gov (United States)

    Boleti, Eirini; Hueglin, Christoph; Takahama, Satoshi

    2017-04-01

    Emissions of ozone precursors have been regulated in Europe since around 1990 with control measures primarily targeting to industries and traffic. In order to understand how these measures have affected air quality, it is now important to investigate concentrations of tropospheric ozone in different types of environments, based on their NOx burden, and in different geographic regions. In this study, we analyze high quality data sets for Switzerland (NABEL network) and whole Europe (AirBase) for the last 25 years to calculate long-term trends of ozone concentrations. A sophisticated time scale decomposition method, called the Ensemble Empirical Mode Decomposition (EEMD) (Huang,1998;Wu,2009), is used for decomposition of the different time scales of the variation of ozone, namely the long-term trend, seasonal and short-term variability. This allows subtraction of the seasonal pattern of ozone from the observations and estimation of long-term changes of ozone concentrations with lower uncertainty ranges compared to typical methodologies used. We observe that, despite the implementation of regulations, for most of the measurement sites ozone daily mean values have been increasing until around mid-2000s. Afterwards, we observe a decline or a leveling off in the concentrations; certainly a late effect of limitations in ozone precursor emissions. On the other hand, the peak ozone concentrations have been decreasing for almost all regions. The evolution in the trend exhibits some differences between the different types of measurement. In addition, ozone is known to be strongly affected by meteorology. In the applied approach, some of the meteorological effects are already captured by the seasonal signal and already removed in the de-seasonalized ozone time series. For adjustment of the influence of meteorology on the higher frequency ozone variation, a statistical approach based on Generalized Additive Models (GAM) (Hastie,1990;Wood,2006), which corrects for meteorological

  18. Review of Tropical-Extratropical Teleconnections on Intraseasonal Time Scales

    Science.gov (United States)

    Stan, Cristiana; Straus, David M.; Frederiksen, Jorgen S.; Lin, Hai; Maloney, Eric D.; Schumacher, Courtney

    2017-12-01

    The interactions and teleconnections between the tropical and midlatitude regions on intraseasonal time scales are an important modulator of tropical and extratropical circulation anomalies and their associated weather patterns. These interactions arise due to the impact of the tropics on the extratropics, the impact of the midlatitudes on the tropics, and two-way interactions between the regions. Observational evidence, as well as theoretical studies with models of complexity ranging from the linear barotropic framework to intricate Earth system models, suggest the involvement of a myriad of processes and mechanisms in generating and maintaining these interconnections. At this stage, our understanding of these teleconnections is primarily a collection of concepts; a comprehensive theoretical framework has yet to be established. These intraseasonal teleconnections are increasingly recognized as an untapped source of potential subseasonal predictability. However, the complexity and diversity of mechanisms associated with these teleconnections, along with the lack of a conceptual framework to relate them, prevent this potential predictability from being translated into realized forecast skill. This review synthesizes our progress in understanding the observed characteristics of intraseasonal tropical-extratropical interactions and their associated mechanisms, identifies the significant gaps in this understanding, and recommends new research endeavors to address the remaining challenges.

  19. Dynamic Alterations to α-Actinin Accompanying Sarcomere Disassembly and Reassembly during Cardiomyocyte Mitosis.

    Directory of Open Access Journals (Sweden)

    Xiaohu Fan

    Full Text Available Although mammals are thought to lose their capacity to regenerate heart muscle shortly after birth, embryonic and neonatal cardiomyocytes in mammals are hyperplastic. During proliferation these cells need to selectively disassemble their myofibrils for successful cytokinesis. The mechanism of sarcomere disassembly is, however, not understood. To study this, we performed a series of immunofluorescence studies of multiple sarcomeric proteins in proliferating neonatal rat ventricular myocytes and correlated these observations with biochemical changes at different cell cycle stages. During myocyte mitosis, α-actinin and titin were disassembled as early as prometaphase. α-actinin (representing the sarcomeric Z-disk disassembly precedes that of titin (M-line, suggesting that titin disassembly occurs secondary to the collapse of the Z-disk. Sarcomere disassembly was concurrent with the dissolution of the nuclear envelope. Inhibitors of several intracellular proteases could not block the disassembly of α-actinin or titin. There was a dramatic increase in both cytosolic (soluble and sarcomeric α-actinin during mitosis, and cytosolic α-actinin exhibited decreased phosphorylation compared to sarcomeric α-actinin. Inhibition of cyclin-dependent kinase 1 (CDK1 induced the quick reassembly of the sarcomere. Sarcomere dis- and re-assembly in cardiomyocyte mitosis is CDK1-dependent and features dynamic differential post-translational modifications of sarcomeric and cytosolic α-actinin.

  20. EON: software for long time simulations of atomic scale systems

    Science.gov (United States)

    Chill, Samuel T.; Welborn, Matthew; Terrell, Rye; Zhang, Liang; Berthet, Jean-Claude; Pedersen, Andreas; Jónsson, Hannes; Henkelman, Graeme

    2014-07-01

    The EON software is designed for simulations of the state-to-state evolution of atomic scale systems over timescales greatly exceeding that of direct classical dynamics. States are defined as collections of atomic configurations from which a minimization of the potential energy gives the same inherent structure. The time evolution is assumed to be governed by rare events, where transitions between states are uncorrelated and infrequent compared with the timescale of atomic vibrations. Several methods for calculating the state-to-state evolution have been implemented in EON, including parallel replica dynamics, hyperdynamics and adaptive kinetic Monte Carlo. Global optimization methods, including simulated annealing, basin hopping and minima hopping are also implemented. The software has a client/server architecture where the computationally intensive evaluations of the interatomic interactions are calculated on the client-side and the state-to-state evolution is managed by the server. The client supports optimization for different computer architectures to maximize computational efficiency. The server is written in Python so that developers have access to the high-level functionality without delving into the computationally intensive components. Communication between the server and clients is abstracted so that calculations can be deployed on a single machine, clusters using a queuing system, large parallel computers using a message passing interface, or within a distributed computing environment. A generic interface to the evaluation of the interatomic interactions is defined so that empirical potentials, such as in LAMMPS, and density functional theory as implemented in VASP and GPAW can be used interchangeably. Examples are given to demonstrate the range of systems that can be modeled, including surface diffusion and island ripening of adsorbed atoms on metal surfaces, molecular diffusion on the surface of ice and global structural optimization of nanoparticles.

  1. Nonequilibrium Physics at Short Time Scales: Formation of Correlations

    International Nuclear Information System (INIS)

    Peliti, L

    2005-01-01

    It is a happy situation when similar concepts and theoretical techniques can be applied to widely different physical systems because of a deep similarity in the situations being studied. The book illustrates this well; it focuses on the description of correlations in quantum systems out of equilibrium at very short time scales, prompted by experiments with short laser pulses in semiconductors, and in complex reactions in heavy nuclei. In both cases the experiments are characterized by nonlinear dynamics and by strong correlations out of equilibrium. In some systems there are also important finite-size effects. The book comprises several independent contributions of moderate length, and I sometimes felt that a more intensive effort in cross-coordination of the different contributions could have been of help. It is divided almost equally between theory and experiment. In the theoretical part, there is a thorough discussion both of the kinematic aspects (description of correlations) and the dynamical ones (evaluation of correlations). The experimental part is naturally divided according to the nature of the system: the interaction of pulsed lasers with matter on the one hand, and the correlations in finite-size systems (nanoparticles and nuclei) on the other. There is also a discussion on the dynamics of superconductors, a subject currently of great interest. Although an effort has been made to keep each contribution self-contained, I must admit that reading level is uneven. However, there are a number of thorough and stimulating contributions that make this book a useful introduction to the topic at the level of graduate students or researchers acquainted with quantum statistical mechanics. (book review)

  2. A methodological approach for designing and sequencing product families in Reconfigurable Disassembly Systems

    Directory of Open Access Journals (Sweden)

    Ignacio Eguia

    2011-10-01

    Full Text Available Purpose: A Reconfigurable Disassembly System (RDS represents a new paradigm of automated disassembly system that uses reconfigurable manufacturing technology for fast adaptation to changes in the quantity and mix of products to disassemble. This paper deals with a methodology for designing and sequencing product families in RDS. Design/methodology/approach: The methodology is developed in a two-phase approach, where products are first grouped into families and then families are sequenced through the RDS, computing the required machines and modules configuration for each family. Products are grouped into families based on their common features using a Hierarchical Clustering Algorithm. The optimal sequence of the product families is calculated using a Mixed-Integer Linear Programming model minimizing reconfigurability and operational costs. Findings: This paper is focused to enable reconfigurable manufacturing technologies to attain some degree of adaptability during disassembly automation design using modular machine tools. Research limitations/implications: The MILP model proposed for the second phase is similar to the well-known Travelling Salesman Problem (TSP and therefore its complexity grows exponentially with the number of products to disassemble. In real-world problems, which a higher number of products, it may be advisable to solve the model approximately with heuristics. Practical implications: The importance of industrial recycling and remanufacturing is growing due to increasing environmental and economic pressures. Disassembly is an important part of remanufacturing systems for reuse and recycling purposes. Automatic disassembly techniques have a growing number of applications in the area of electronics, aerospace, construction and industrial equipment. In this paper, a design and scheduling approach is proposed to apply in this area. Originality/value: This paper presents a new concept called Reconfigurable Disassembly System

  3. Development of remote disassembly technology for liquid-metal reactor (LMR) fuel

    International Nuclear Information System (INIS)

    Bradley, E.C.; Evans, J.H.; Metz, C.F. III; Weil, B.S.

    1990-01-01

    A major objective of the Consolidated Fuel Reprocessing Program (CFRP) is to develop equipment and demonstrate technology to reprocess fast breeder reactor fuel. Experimental work on fuel disassembly cutting methods began in the 1970s. High-power laser cutting was selected as the preferred cutting method for fuel disassembly. Remotely operated development equipment was designed, fabricated, installed, and tested at Oak Ridge National Laboratory (ORNL). Development testing included remote automatic operation, remote maintenance testing, and laser cutting process development. This paper summarizes the development work performed at ORNL on remote fuel disassembly. 2 refs., 1 fig

  4. Attractors of relaxation discrete-time systems with chaotic dynamics on a fast time scale

    International Nuclear Information System (INIS)

    Maslennikov, Oleg V.; Nekorkin, Vladimir I.

    2016-01-01

    In this work, a new type of relaxation systems is considered. Their prominent feature is that they comprise two distinct epochs, one is slow regular motion and another is fast chaotic motion. Unlike traditionally studied slow-fast systems that have smooth manifolds of slow motions in the phase space and fast trajectories between them, in this new type one observes, apart the same geometric objects, areas of transient chaos. Alternating periods of slow regular motions and fast chaotic ones as well as transitions between them result in a specific chaotic attractor with chaos on a fast time scale. We formulate basic properties of such attractors in the framework of discrete-time systems and consider several examples. Finally, we provide an important application of such systems, the neuronal electrical activity in the form of chaotic spike-burst oscillations.

  5. Some Differential Inequalities on Time Scales and Their Applications to Feedback Control Systems

    Directory of Open Access Journals (Sweden)

    Yonghong Fan

    2017-01-01

    Full Text Available This paper deals with feedback control systems on time scales. Firstly, we generalize the semicycle concept to time scales and then establish some differential inequalities on time scales. Secondly, as applications of these inequalities, we study the uniform ultimate boundedness of solutions of these systems. We give a new method to investigate the permanence of ecosystem on time scales. And some known results have been generalized. Finally, an example is given to support the result.

  6. Entangled time in flocking: Multi-time-scale interaction reveals emergence of inherent noise.

    Science.gov (United States)

    Niizato, Takayuki; Murakami, Hisashi

    2018-01-01

    Collective behaviors that seem highly ordered and result in collective alignment, such as schooling by fish and flocking by birds, arise from seamless shuffling (such as super-diffusion) and bustling inside groups (such as Lévy walks). However, such noisy behavior inside groups appears to preclude the collective behavior: intuitively, we expect that noisy behavior would lead to the group being destabilized and broken into small sub groups, and high alignment seems to preclude shuffling of neighbors. Although statistical modeling approaches with extrinsic noise, such as the maximum entropy approach, have provided some reasonable descriptions, they ignore the cognitive perspective of the individuals. In this paper, we try to explain how the group tendency, that is, high alignment, and highly noisy individual behavior can coexist in a single framework. The key aspect of our approach is multi-time-scale interaction emerging from the existence of an interaction radius that reflects short-term and long-term predictions. This multi-time-scale interaction is a natural extension of the attraction and alignment concept in many flocking models. When we apply this method in a two-dimensional model, various flocking behaviors, such as swarming, milling, and schooling, emerge. The approach also explains the appearance of super-diffusion, the Lévy walk in groups, and local equilibria. At the end of this paper, we discuss future developments, including extending our model to three dimensions.

  7. A thermodynamic model of microtubule assembly and disassembly.

    Directory of Open Access Journals (Sweden)

    Bernard M A G Piette

    Full Text Available Microtubules are self-assembling polymers whose dynamics are essential for the normal function of cellular processes including chromosome separation and cytokinesis. Therefore understanding what factors effect microtubule growth is fundamental to our understanding of the control of microtubule based processes. An important factor that determines the status of a microtubule, whether it is growing or shrinking, is the length of the GTP tubulin microtubule cap. Here, we derive a Monte Carlo model of the assembly and disassembly of microtubules. We use thermodynamic laws to reduce the number of parameters of our model and, in particular, we take into account the contribution of water to the entropy of the system. We fit all parameters of the model from published experimental data using the GTP tubulin dimer attachment rate and the lateral and longitudinal binding energies of GTP and GDP tubulin dimers at both ends. Also we calculate and incorporate the GTP hydrolysis rate. We have applied our model and can mimic published experimental data, which formerly suggested a single layer GTP tubulin dimer microtubule cap, to show that these data demonstrate that the GTP cap can fluctuate and can be several microns long.

  8. Augmented stress fiber arrays after cytopharmacologic disassembly of microtubules

    Energy Technology Data Exchange (ETDEWEB)

    Godman, G.C.; Tannenbaum, J.; Brett, J.B.

    1986-03-01

    Disruption of microtubules (mt) of bovine aortic endothelial (BAE) cells, and normal and transformed fibroblasts, by exposure to 2.5 ..mu..M colchicine; 12 ..mu..M vinblastine; or 1 ..mu..M nocodazole, for 5 or 20 hrs results in aggregation of vimentin-intermediate filament (IF) and the development of markedly augmented stress fiber (SF) arrays. After disassembly of mt, confluent BAE, with circumferential marginal microfilament bands and few central SF, develop dense ribbon-like SF arrays, and spontaneously transformed fibroblasts (tHmf-e), which before treatment are apolar or epithelioid and have few or no SF, acquire extensive organized SF arrays. The axially oriented SF span the entire cell length and terminate in vinculin-containing adhesion plaques, polarizing these cells. The visible increase in SF associated actin is not accompanied by an increase either in actin synthesis (determined from electropherograms after pulse labeling with (/sup 35/S)methionine), or content (DNAse I assay for total cell actin). The reorganization of actin into SF and the development of vinculin adhesion plaques is independent of protein synthesis and occurs in the presence of cycloheximide (10 ..mu..g/ml). These results suggest a role for mt and IF in the regulation of the organizational state of the actin-based cytoskeleton.

  9. Disassembly and Dislocation of a Bipolar Hip Prosthesis

    Directory of Open Access Journals (Sweden)

    Hsieh-Hsing Lee

    2008-01-01

    Full Text Available Dislocation of a hip prosthesis is a common complication. In usual cases of hip prosthesis dislocation, the prosthetic femoral head comes out from either the natural acetabular cavity in a bipolar hemiarthroplasty or the prosthetic acetabulum in a total hip arthroplasty. Only a few cases of bipolar hip prosthesis dislocation due to dissociation between the polyethylene and inner head of the prosthesis have been reported. We describe a rare case of disassembly of the inner head from the bipolar outer prosthesis in an osteoarthritic acetabulum. A 72-year-old woman had undergone bipolar hemiarthroplasty due to fracture of the left femoral neck about 10 years previously. Recently, she sustained an injury after falling from a chair, and examinations revealed an unusual disassembly−dislocation of the bipolar hip prosthesis. We classified this failure in our patient as a type II failure, representing extreme varus position of the outer head in the acetabulum, dislocation of the inner head from the outer head, and a detached locking ring around the stem neck. This mechanism of failure as shown in our patient rarely occurs in the bipolar prosthesis of the self-centering system. Osteoarthritic change of the acetabulum would place the outer head in the varus position, increasing wear on the beveled rim by impinging the femoral stem neck and causing dislodgment of the inner locking ring and consequent disassembly−dislocation of the inner head.

  10. Decommissioning of nuclear facilities: Decontamination, disassembly and waste management

    International Nuclear Information System (INIS)

    1983-01-01

    The term 'decommissioning', as used within the nuclear industry, means the actions taken at the end of a facility's useful life to retire the facility from service in a manner that provides adequate protection for the health and safety of the decommissioning workers, the general public, and for the environment. These actions can range from merely closing down the facility and a minimal removal of radioactive material coupled with continuing maintenance and surveillance, to a complete removal of residual radioactivity in excess of levels acceptable for unrestricted use of the facility and its site. This latter condition, unrestricted use, is the ultimate goal of all decommissioning actions at retired nuclear facilities. The purpose of this report is to provide an information base on the considerations important to decommissioning, the methods available for decontamination and disassembly of a nuclear facility, the management of the resulting radioactive wastes, and the areas of decommissioning methodology where improvements might be made. Specific sections are devoted to each of these topics, and conclusions are presented concerning the present status of each topic. A summary of past decommissioning experience in Member States is presented in the Appendix. The report, with its discussions of necessary considerations, available operational methods, and waste management practices, together with supporting references, provides an appreciation of the activities that comprise decommissioning of nuclear facilities. It is anticipated that the information presented in the report should prove useful to persons concerned with the development of plans for the decommissioning of retired nuclear facilities

  11. Disassembly Properties of Cementitious Finish Joints Using an Induction Heating Method

    Science.gov (United States)

    Ahn, Jaecheol; Noguchi, Takafumi; Kitagaki, Ryoma

    2015-01-01

    Efficient maintenance and upgrading of a building during its lifecycle are difficult because a cementitious finish uses materials and parts with low disassembly properties. Additionally, the reuse and recycling processes during building demolition also present numerous problems from the perspective of environmental technology. In this study, an induction heating (IH) method was used to disassemble cementitious finish joints, which are widely used to join building members and materials. The IH rapidly and selectively heated and weakened these joints. The temperature elevation characteristics of the cementitious joint materials were measured as a function of several resistor types, including wire meshes and punching metals, which are usually used for cementitious finishing. The disassembly properties were evaluated through various tests using conductive resistors in cementitious joints such as mortar. When steel fiber, punching metal, and wire mesh were used as conductive resistors, the cementitious modifiers could be weakened within 30 s. Cementitious joints with conductive resistors also showed complete disassembly with little residual bond strength.

  12. Disassembled DJ-1 high molecular weight complex in cortex mitochondria from Parkinson's disease patients

    Directory of Open Access Journals (Sweden)

    Adler Charles

    2009-07-01

    Full Text Available Abstract Correction to Nural H, He P, Beach T, Sue L, Xia W, Shen Y. Disassembled DJ-1 high molecular weight complex in cortex mitochondria from Parkinson's disease patients Molecular Neurodegeneration 2009, 4:23.

  13. Multiple dynamical time-scales in networks with hierarchically ...

    Indian Academy of Sciences (India)

    Recent research, on the other hand, has revealed that networks which are indistinguishable at either of these two scales may nevertheless have radically different behaviour [7]. The origin of this difference lies in their mesoscopic organization which can be structurally manifested as patterns in the arrangement of links.

  14. Length and time scales of atmospheric moisture recycling

    NARCIS (Netherlands)

    Van der Ent, R.J.; Savenije, H.H.G.

    2011-01-01

    It is difficult to quantify the degree to which terrestrial evaporation supports the occurrence of precipitation within a certain study region (i.e. regional moisture recycling) due to the scale- and shape-dependence of regional moisture recycling ratios. In this paper we present a novel approach to

  15. Changes in channel morphology over human time scales [Chapter 32

    Science.gov (United States)

    John M. Buffington

    2012-01-01

    Rivers are exposed to changing environmental conditions over multiple spatial and temporal scales, with the imposed environmental conditions and response potential of the river modulated to varying degrees by human activity and our exploitation of natural resources. Watershed features that control river morphology include topography (valley slope and channel...

  16. Global terrestrial biogeochemistry: Perturbations, interactions, and time scales

    Energy Technology Data Exchange (ETDEWEB)

    Braswell, B.H. Jr.

    1996-12-01

    Global biogeochemical processes are being perturbed by human activity, principally that which is associated with industrial activity and expansion of urban and agricultural complexes. Perturbations have manifested themselves at least since the beginning of the 19th Century, and include emissions of CO{sub 2} and other pollutants from fossil fuel combustion, agricultural emissions of reactive nitrogen, and direct disruption of ecosystem function through land conversion. These perturbations yield local impacts, but there are also global consequences that are the sum of local-scale influences. Several approaches to understanding the global-scale implications of chemical perturbations to the Earth system are discussed. The lifetime of anthropogenic CO{sub 2} in the atmosphere is an important concept for understanding the current and future commitment to an altered atmospheric heat budget. The importance of the terrestrial biogeochemistry relative to the lifetime of excess CO{sub 2} is demonstrated using dynamic, aggregated models of the global carbon cycle.

  17. Grasping Deep Time with Scaled Space in Personal Environs

    DEFF Research Database (Denmark)

    Jacobsen, B. H.

    2014-01-01

    Deep time comprises the deep past before written history all the way back to the Big Bang as well as the deep future from the time of our grandchildren and beyond the lifetime of our Sun. Numerous installations called time walks or geology paths have previously been designed to communicate...... of modern man, the age of dinosaurs ended at 650 m and the Big Bang is 137 km away. This choice obviously makes mental calculations easy, and all of time fits inside a geographical area of moderate size and so helps the citizen gain ownership to this learning tool and hence to time. The idea was tested...... years (3.9 km); the full path of time from the Big Bang to the death of the Sun was installed as a downloadable kmz file for Google Earth, linking to 25 video narratives recorded on location along the path....

  18. Does expressive timing in music performance scale proportionally with tempo?

    NARCIS (Netherlands)

    Desain, P.; Honing, H.

    1994-01-01

    Evidence is presented that expressive timing in music is not relationally invariant with global tempo. Our results stem from an analysis of repeated performances of Beethoven's variations on a Paisiello theme. Recordings were made of two pianists playing the pieces at three tempi. In contrast with

  19. Perception of short time scale intervals in a hypnotic virtuoso

    NARCIS (Netherlands)

    Noreika, Valdas; Falter, Christine M.; Arstila, Valtteri; Wearden, John H.; Kallio, Sakari

    2012-01-01

    Previous studies showed that hypnotized individuals underestimate temporal intervals in the range of several seconds to tens of minutes. However, no previous work has investigated whether duration perception is equally disorderly when shorter time intervals are probed. In this study, duration

  20. Coherent spectroscopies on ultrashort time and length scales

    Directory of Open Access Journals (Sweden)

    Schneider C.

    2013-03-01

    Full Text Available Three spectroscopic techniques are presented that provide simultaneous spatial and temporal resolution: modified confocal microscopy with heterodyne detection, space-time-resolved spectroscopy using coherent control concepts, and coherent two-dimensional nano-spectroscopy. Latest experimental results are discussed.

  1. Modelling financial markets with agents competing on different time scales and with different amount of information

    Science.gov (United States)

    Wohlmuth, Johannes; Andersen, Jørgen Vitting

    2006-05-01

    We use agent-based models to study the competition among investors who use trading strategies with different amount of information and with different time scales. We find that mixing agents that trade on the same time scale but with different amount of information has a stabilizing impact on the large and extreme fluctuations of the market. Traders with the most information are found to be more likely to arbitrage traders who use less information in the decision making. On the other hand, introducing investors who act on two different time scales has a destabilizing effect on the large and extreme price movements, increasing the volatility of the market. Closeness in time scale used in the decision making is found to facilitate the creation of local trends. The larger the overlap in commonly shared information the more the traders in a mixed system with different time scales are found to profit from the presence of traders acting at another time scale than themselves.

  2. Perception of short time scale intervals in a hypnotic virtuoso.

    Science.gov (United States)

    Noreika, Valdas; Falter, Christine M; Arstila, Valtteri; Wearden, John H; Kallio, Sakari

    2012-01-01

    Previous studies showed that hypnotized individuals underestimate temporal intervals in the range of several seconds to tens of minutes. However, no previous work has investigated whether duration perception is equally disorderly when shorter time intervals are probed. In this study, duration perception of a hypnotic virtuoso was tested using repeated standard temporal generalization and duration estimation tasks. When compared to the baseline state, hypnosis affected perception of intervals spread around 600 ms in the temporal generalization task but did not alter perception of slightly longer intervals spread around 1000 ms. Furthermore, generalization of temporal intervals was more orderly under hypnosis than in the baseline state. In contrast, the hypnotic virtuoso showed a typical time underestimation effect when perception of longer supra-second intervals was tested in the duration estimation task, replicating results of the previous hypnosis studies.

  3. Time-scale invariance as an emergent property in a perceptron with realistic, noisy neurons.

    Science.gov (United States)

    Buhusi, Catalin V; Oprisan, Sorinel A

    2013-05-01

    In most species, interval timing is time-scale invariant: errors in time estimation scale up linearly with the estimated duration. In mammals, time-scale invariance is ubiquitous over behavioral, lesion, and pharmacological manipulations. For example, dopaminergic drugs induce an immediate, whereas cholinergic drugs induce a gradual, scalar change in timing. Behavioral theories posit that time-scale invariance derives from particular computations, rules, or coding schemes. In contrast, we discuss a simple neural circuit, the perceptron, whose output neurons fire in a clockwise fashion based on the pattern of coincidental activation of its input neurons. We show numerically that time-scale invariance emerges spontaneously in a perceptron with realistic neurons, in the presence of noise. Under the assumption that dopaminergic drugs modulate the firing of input neurons, and that cholinergic drugs modulate the memory representation of the criterion time, we show that a perceptron with realistic neurons reproduces the pharmacological clock and memory patterns, and their time-scale invariance, in the presence of noise. These results suggest that rather than being a signature of higher order cognitive processes or specific computations related to timing, time-scale invariance may spontaneously emerge in a massively connected brain from the intrinsic noise of neurons and circuits, thus providing the simplest explanation for the ubiquity of scale invariance of interval timing. Copyright © 2013 Elsevier B.V. All rights reserved.

  4. A Study on Time-Scales Ratio and Turbulent Prandtl Number in Ducts of Industrial Applications

    DEFF Research Database (Denmark)

    Rokni, Masoud

    2006-01-01

    is solved using a two-equation heat flux model. The computed results compare satisfactory with the available experimental data. The time-scale ratio R is defined as the ratio between the dynamic time-scale (k/ε) and the scalar time-scale(0.5θθ/εθ). Based on existing DNS data and calculations in this work...... of heat exchangers for various applications area....

  5. Long time scale simulation of a grain boundary in copper

    DEFF Research Database (Denmark)

    Pedersen, A.; Henkelman, G.; Schiøtz, Jakob

    2009-01-01

    A general, twisted and tilted, grain boundary in copper has been simulated using the adaptive kinetic Monte Carlo method to study the atomistic structure of the non-crystalline region and the mechanism of annealing events that occur at low temperature. The simulated time interval spanned 67 mu s...... was also observed. In the final low-energy configurations, the thickness of the region separating the crystalline grains corresponds to just one atomic layer, in good agreement with reported experimental observations. The simulated system consists of 1307 atoms and atomic interactions were described using...

  6. Temperature Responses to Spectral Solar Variability on Decadal Time Scales

    Science.gov (United States)

    Cahalan, Robert F.; Wen, Guoyong; Harder, Jerald W.; Pilewskie, Peter

    2010-01-01

    Two scenarios of spectral solar forcing, namely Spectral Irradiance Monitor (SIM)-based out-of-phase variations and conventional in-phase variations, are input to a time-dependent radiative-convective model (RCM), and to the GISS modelE. Both scenarios and models give maximum temperature responses in the upper stratosphere, decreasing to the surface. Upper stratospheric peak-to-peak responses to out-of-phase forcing are approx.0.6 K and approx.0.9 K in RCM and modelE, approx.5 times larger than responses to in-phase forcing. Stratospheric responses are in-phase with TSI and UV variations, and resemble HALOE observed 11-year temperature variations. For in-phase forcing, ocean mixed layer response lags surface air response by approx.2 years, and is approx.0.06 K compared to approx.0.14 K for atmosphere. For out-of-phase forcing, lags are similar, but surface responses are significantly smaller. For both scenarios, modelE surface responses are less than 0.1 K in the tropics, and display similar patterns over oceanic regions, but complex responses over land.

  7. Global Exponential Stability of Delayed Cohen-Grossberg BAM Neural Networks with Impulses on Time Scales

    Directory of Open Access Journals (Sweden)

    Fei Yu

    2009-01-01

    Full Text Available Based on the theory of calculus on time scales, the homeomorphism theory, Lyapunov functional method, and some analysis techniques, sufficient conditions are obtained for the existence, uniqueness, and global exponential stability of the equilibrium point of Cohen-Grossberg bidirectional associative memory (BAM neural networks with distributed delays and impulses on time scales. This is the first time applying the time-scale calculus theory to unify the discrete-time and continuous-time Cohen-Grossberg BAM neural network with impulses under the same framework.

  8. A Novel Multiple-Time Scale Integrator for the Hybrid Monte Carlo Algorithm

    International Nuclear Information System (INIS)

    Kamleh, Waseem

    2011-01-01

    Hybrid Monte Carlo simulations that implement the fermion action using multiple terms are commonly used. By the nature of their formulation they involve multiple integration time scales in the evolution of the system through simulation time. These different scales are usually dealt with by the Sexton-Weingarten nested leapfrog integrator. In this scheme the choice of time scales is somewhat restricted as each time step must be an exact multiple of the next smallest scale in the sequence. A novel generalisation of the nested leapfrog integrator is introduced which allows for far greater flexibility in the choice of time scales, as each scale now must only be an exact multiple of the smallest step size.

  9. 2005 Program of Study: Fast Times and Fine Scales

    Science.gov (United States)

    2006-07-01

    8217, (2.5) and the space time average, (F) F(x)ddx. (2.6) From here on our domain will be a periodic box of size L, i.e. x C Td , the d-dimensional torus...variance for s(x) = sin ksxl and x c Td i.e., x E [0, L]d, is saturated by the sweeping flow suggested by W. R. Young. Consider the steady advection...2 47 2 +3F -y 2 ,.YI2 (472 + 3F) 3F ( IYr + _Y2) 8 (Z + y2 Z’) K(- _C)2± (U, +C) 2 + C -C S3y2 IYl2 Z’ 3Z ( 2] (41) 240 where Z -3 + 2FU, *r K__c (Uvc

  10. Time scales and the problem of radioactive waste

    International Nuclear Information System (INIS)

    Goble, R.L.

    1984-01-01

    The author argues that decisions about future nuclear development can be made essentially independent of waste management considerations for the next 20 years. His arguments are based on five propositions: 1 Risks and costs of storing spent fuel or high-level waste and transuranics are lower than other directly comparable risks and costs of operating a reactor. 2 Storage of mill tailings is the most serious long-term waste problem; it is not serious enough to rule out the use of nuclear power. 3 There are compelling reasons for beginning to implement a waste management program now. 4 It is important to separate the problem of providing temporary storage from that of finding permanent repositories. 5 A prudent waste management strategy, by 2000, will have identified and evaluated more than enough repository space for the waste generated by that time, independent of the decision made about nuclear futures. 13 references, 4 figures, 4 tables

  11. Centralized disassembly and packaging of spent fuel in the DOE spent fuel management system

    International Nuclear Information System (INIS)

    Johnson, E.R.

    1986-01-01

    In October 1984, E.R. Johnson Associates, Inc. (JAI) initiated a study of the prospective use of a centralized facility for the disassembly and packaging of spent fuel to support the various elements of the US Dept. of Energy (DOE) spent fuel management system, including facilities for monitored retrievable storage (MRS) and repositories. It was DOE's original plan to receive spent fuel at each repository where it would be disassembled and packaged (overpacked) for disposal purposes. Subsequently, DOE considered the prospective use of MRS of spent fuel as an option for providing safe and reliable management of spent fuel. This study was designed to consider possible advantages of the use of centralized facilities for disassembly and packaging of spent fuel at whose location storage facilities could be added as required. The study was divided into three principal technical tasks that covered: (a) development of requirements and criteria for the central disassembly and packaging facility and associated systems. (2) Development of conceptual designs for the central disassembly and packaging facility and associated systems. (3) Estimation of capital and operating costs involved for all system facilities and determination of life cycle costs for various scenarios of operation - for comparison with the reference system

  12. Phosphorylation of Nup98 by multiple kinases is crucial for NPC disassembly during mitotic entry.

    Science.gov (United States)

    Laurell, Eva; Beck, Katja; Krupina, Ksenia; Theerthagiri, Gandhi; Bodenmiller, Bernd; Horvath, Peter; Aebersold, Ruedi; Antonin, Wolfram; Kutay, Ulrike

    2011-02-18

    Disassembly of nuclear pore complexes (NPCs) is a decisive event during mitotic entry in cells undergoing open mitosis, yet the molecular mechanisms underlying NPC disassembly are unknown. Using chemical inhibition and depletion experiments we show that NPC disassembly is a phosphorylation-driven process, dependent on CDK1 activity and supported by members of the NIMA-related kinase (Nek) family. We identify phosphorylation of the GLFG-repeat nucleoporin Nup98 as an important step in mitotic NPC disassembly. Mitotic hyperphosphorylation of Nup98 is accomplished by multiple kinases, including CDK1 and Neks. Nuclei carrying a phosphodeficient mutant of Nup98 undergo nuclear envelope breakdown slowly, such that both the dissociation of Nup98 from NPCs and the permeabilization of the nuclear envelope are delayed. Together, our data provide evidence for a phosphorylation-dependent mechanism underlying disintegration of NPCs during prophase. Moreover, we identify mitotic phosphorylation of Nup98 as a rate-limiting step in mitotic NPC disassembly. Copyright © 2011 Elsevier Inc. All rights reserved.

  13. An Intelligent Agent-Controlled and Robot-Based Disassembly Assistant

    Science.gov (United States)

    Jungbluth, Jan; Gerke, Wolfgang; Plapper, Peter

    2017-09-01

    One key for successful and fluent human-robot-collaboration in disassembly processes is equipping the robot system with higher autonomy and intelligence. In this paper, we present an informed software agent that controls the robot behavior to form an intelligent robot assistant for disassembly purposes. While the disassembly process first depends on the product structure, we inform the agent using a generic approach through product models. The product model is then transformed to a directed graph and used to build, share and define a coarse disassembly plan. To refine the workflow, we formulate “the problem of loosening a connection and the distribution of the work” as a search problem. The created detailed plan consists of a sequence of actions that are used to call, parametrize and execute robot programs for the fulfillment of the assistance. The aim of this research is to equip robot systems with knowledge and skills to allow them to be autonomous in the performance of their assistance to finally improve the ergonomics of disassembly workstations.

  14. RECENT GEODYNAMICS OF FAULT ZONES: FAULTING IN REAL TIME SCALE

    Directory of Open Access Journals (Sweden)

    Yu. O. Kuzmin

    2014-01-01

    Full Text Available Recent deformation processes taking place in real time are analyzed on the basis of data on fault zones which were collected by long-term detailed geodetic survey studies with application of field methods and satellite monitoring.A new category of recent crustal movements is described and termed as parametrically induced tectonic strain in fault zones. It is shown that in the fault zones located in seismically active and aseismic regions, super intensive displacements of the crust (5 to 7 cm per year, i.e. (5 to 7·10–5 per year occur due to very small external impacts of natural or technogenic / industrial origin.The spatial discreteness of anomalous deformation processes is established along the strike of the regional Rechitsky fault in the Pripyat basin. It is concluded that recent anomalous activity of the fault zones needs to be taken into account in defining regional regularities of geodynamic processes on the basis of real-time measurements.The paper presents results of analyses of data collected by long-term (20 to 50 years geodetic surveys in highly seismically active regions of Kopetdag, Kamchatka and California. It is evidenced by instrumental geodetic measurements of recent vertical and horizontal displacements in fault zones that deformations are ‘paradoxically’ deviating from the inherited movements of the past geological periods.In terms of the recent geodynamics, the ‘paradoxes’ of high and low strain velocities are related to a reliable empirical fact of the presence of extremely high local velocities of deformations in the fault zones (about 10–5 per year and above, which take place at the background of slow regional deformations which velocities are lower by the order of 2 to 3. Very low average annual velocities of horizontal deformation are recorded in the seismic regions of Kopetdag and Kamchatka and in the San Andreas fault zone; they amount to only 3 to 5 amplitudes of the earth tidal deformations per year.A

  15. Biomedical exploitation of chitin and chitosan via mechano-chemical disassembly, electrospinning, dissolution in imidazolium ionic liquids, and supercritical drying.

    Science.gov (United States)

    Muzzarelli, Riccardo A A

    2011-01-01

    Recently developed technology permits to optimize simultaneously surface area, porosity, density, rigidity and surface morphology of chitin-derived materials of biomedical interest. Safe and ecofriendly disassembly of chitin has superseded the dangerous acid hydrolysis and provides higher yields and scaling-up possibilities: the chitosan nanofibrils are finding applications in reinforced bone scaffolds and composite dressings for dermal wounds. Electrospun chitosan nanofibers, in the form of biocompatible thin mats and non-wovens, are being actively studied: composites of gelatin + chitosan + polyurethane have been proposed for cardiac valves and for nerve conduits; fibers are also manufactured from electrospun particles that self-assemble during subsequent freeze-drying. Ionic liquids (salts of alkylated imidazolium) are suitable as non-aqueous solvents that permit desirable reactions to occur for drug delivery purposes. Gel drying with supercritical CO(2) leads to structures most similar to the extracellular matrix, even when the chitosan is crosslinked, or in combination with metal oxides of interest in orthopedics.

  16. Marine Dispersal Scales Are Congruent over Evolutionary and Ecological Time

    KAUST Repository

    Pinsky, Malin L.

    2016-12-15

    The degree to which offspring remain near their parents or disperse widely is critical for understanding population dynamics, evolution, and biogeography, and for designing conservation actions. In the ocean, most estimates suggesting short-distance dispersal are based on direct ecological observations of dispersing individuals, while indirect evolutionary estimates often suggest substantially greater homogeneity among populations. Reconciling these two approaches and their seemingly competing perspectives on dispersal has been a major challenge. Here we show for the first time that evolutionary and ecological measures of larval dispersal can closely agree by using both to estimate the distribution of dispersal distances. In orange clownfish (Amphiprion percula) populations in Kimbe Bay, Papua New Guinea, we found that evolutionary dispersal kernels were 17 km (95% confidence interval: 12–24 km) wide, while an exhaustive set of direct larval dispersal observations suggested kernel widths of 27 km (19–36 km) or 19 km (15–27 km) across two years. The similarity between these two approaches suggests that ecological and evolutionary dispersal kernels can be equivalent, and that the apparent disagreement between direct and indirect measurements can be overcome. Our results suggest that carefully applied evolutionary methods, which are often less expensive, can be broadly relevant for understanding ecological dispersal across the tree of life.

  17. Neural Computations in a Dynamical System with Multiple Time Scales

    Directory of Open Access Journals (Sweden)

    Yuanyuan Mi

    2016-09-01

    Full Text Available Neural systems display rich short-term dynamics at various levels, e.g., spike-frequencyadaptation (SFA at single neurons, and short-term facilitation (STF and depression (STDat neuronal synapses. These dynamical features typically covers a broad range of time scalesand exhibit large diversity in different brain regions. It remains unclear what the computationalbenefit for the brain to have such variability in short-term dynamics is. In this study, we proposethat the brain can exploit such dynamical features to implement multiple seemingly contradictorycomputations in a single neural circuit. To demonstrate this idea, we use continuous attractorneural network (CANN as a working model and include STF, SFA and STD with increasing timeconstants in their dynamics. Three computational tasks are considered, which are persistent activity,adaptation, and anticipative tracking. These tasks require conflicting neural mechanisms, andhence cannot be implemented by a single dynamical feature or any combination with similar timeconstants. However, with properly coordinated STF, SFA and STD, we show that the network isable to implement the three computational tasks concurrently. We hope this study will shed lighton the understanding of how the brain orchestrates its rich dynamics at various levels to realizediverse cognitive functions.

  18. Updating the planetary time scale: focus on Mars

    Science.gov (United States)

    Tanaka, Kenneth L.; Quantin-Nataf, Cathy

    2013-01-01

    Formal stratigraphic systems have been developed for the surface materials of the Moon, Mars, Mercury, and the Galilean satellite Ganymede. These systems are based on geologic mapping, which establishes relative ages of surfaces delineated by superposition, morphology, impact crater densities, and other relations and features. Referent units selected from the mapping determine time-stratigraphic bases and/or representative materials characteristic of events and periods for definition of chronologic units. Absolute ages of these units in some cases can be estimated using crater size-frequency data. For the Moon, the chronologic units and cratering record are calibrated by radiometric ages measured from samples collected from the lunar surface. Model ages for other cratered planetary surfaces are constructed primarily by estimating cratering rates relative to that of the Moon. Other cratered bodies with estimated surface ages include Venus and the Galilean satellites of Jupiter. New global geologic mapping and crater dating studies of Mars are resulting in more accurate and detailed reconstructions of its geologic history.

  19. Freshwater flushing time scales of the Vashishti Estuary, west coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    DineshKumar, P.K.; Sarma, R.V.; Zingde, M.D.

    Results are presented for the Vashishti estuary, Kerala, India to evaluate its freshwater flushing time scales based on 8 sets of observations of longitudinal salinity distributions. The results of the flushing time using the fraction of freshwater...

  20. Glottal closure instant and voice source analysis using time-scale ...

    Indian Academy of Sciences (India)

    2016-08-26

    Aug 26, 2016 ... 1Time-scale representation of voiced speech is applied to voice quality analysis, by introducing the Line of Maximum Amplitude (LoMA) method. This representation takes advantage of the tree patterns observed for voiced speech periods in the time-scale domain. For each period, the optimal LoMA is ...

  1. Measurement Invariance of the Perceived Stress Scale and Latent Mean Differences across Gender and Time

    NARCIS (Netherlands)

    Barbosa-Leiker, C.; Kostick, M.; Lei, M.; McPherson, S.; Roper, V.; Hoekstra, T.; Wright, B.

    2013-01-01

    Measurement invariance of the 2-factor model of the Perceived Stress Scale - 10-item version (Cohen & Williamson, 1988) was tested across men and women at two time points and in the combined total sample over a 2-year time frame (n = 871). Measurement invariance results indicated that the scale

  2. Quantifying catchment-scale mixing and its effect on time-varying travel time distributions

    NARCIS (Netherlands)

    Van Der Velde, Y.; Torfs, P. J J F; Van Der Zee, S. E A T M; Uijlenhoet, R.

    2012-01-01

    Travel time distributions are often used to characterize catchment discharge behavior, catchment vulnerability to pollution and pollutant loads from catchments to downstream waters. However, these distributions vary with time because they are a function of rainfall and evapotranspiration. It is

  3. Shielding of optical pulses on hydrodynamical time scales in laser-induced breakdown of saline water

    OpenAIRE

    Conti, Daniel; Marino, Francesco; Roati, Giacomo; Orfila, Alejandro; Javaloyes, Julien; Piro, Oreste; Balle, Salvador

    2014-01-01

    Pulse shielding in Laser-Induced Breakdown of saline water on hydrodynamic time scales is experimentally characterized. Pairs of pulses from a Nd:YAG laser are focused into saline water with a controlled time delay between them. The Laser-Induced Breakdown produced by the first pulse creates a cavitation bubble that later collapses generating a plume of bubbles that evolves on hydrodynamic time scales. When the second pulse arrives, the light is scattered by this plume with a consequent reduc...

  4. Modelling soil carbon movement by erosion over large scales and long time periods

    Science.gov (United States)

    Quinton, John; Davies, Jessica; Tipping, Ed

    2014-05-01

    Agricultural intensification accelerates physical erosion rates and the transport of carbon within the landscape. In order to improve understanding of how past, present and future anthropogenic land-use change has and will influence carbon and nutrient cycling, it is necessary to develop quantitative tools that can predict soil erosion and carbon movement at large temporal and spatial scales, that are consistent with the time constants of biogeochemical processes and the spatial scales of land-use change and natural resources. However, representing erosion and its impact on the carbon cycle over large spatial scales and long time periods is challenging. Erosion and sediment transport processes operate at multiple spatial and temporal scales with splash erosion dominating at the sub-plot scale and occurring within seconds, up to gully formation operating at field-catchment scales over days to months. In addition, most erosion production observations are made at the experimental plot scale, where fine time scales and detailed processes dominate. This is coupled with complexities associated with carbon detachment, decomposition and uncertainties surrounding carbon burial rates and stability - all of which occur over widely different temporal and spatial scales. As such, these data cannot be simply scaled to inform erosion and carbon representation at the regional scale, where topography, vegetation cover and landscape organisation become more important controls on sediment fluxes. We have developed a simple energy-based regional scale method of soil erosion modelling, which is integration into a hydro-biogeochemical model that will simulate carbon, nitrogen and phosphorus pools and fluxes across the UK from the industrial revolution to the present day. The model is driven by overland flow, dynamic vegetation cover, soil properties, and topographic distributions and produces sediment production and yield at the 5km grid scale. In this paper we will introduce the

  5. Effect of helicity on the correlation time of large scales in turbulent flows

    Science.gov (United States)

    Cameron, Alexandre; Alexakis, Alexandros; Brachet, Marc-Étienne

    2017-11-01

    Solutions of the forced Navier-Stokes equation have been conjectured to thermalize at scales larger than the forcing scale, similar to an absolute equilibrium obtained for the spectrally truncated Euler equation. Using direct numeric simulations of Taylor-Green flows and general-periodic helical flows, we present results on the probability density function, energy spectrum, autocorrelation function, and correlation time that compare the two systems. In the case of highly helical flows, we derive an analytic expression describing the correlation time for the absolute equilibrium of helical flows that is different from the E-1 /2k-1 scaling law of weakly helical flows. This model predicts a new helicity-based scaling law for the correlation time as τ (k ) ˜H-1 /2k-1 /2 . This scaling law is verified in simulations of the truncated Euler equation. In simulations of the Navier-Stokes equations the large-scale modes of forced Taylor-Green symmetric flows (with zero total helicity and large separation of scales) follow the same properties as absolute equilibrium including a τ (k ) ˜E-1 /2k-1 scaling for the correlation time. General-periodic helical flows also show similarities between the two systems; however, the largest scales of the forced flows deviate from the absolute equilibrium solutions.

  6. Studying the time scale dependence of environmental variables predictability using fractal analysis.

    Science.gov (United States)

    Yuval; Broday, David M

    2010-06-15

    Prediction of meteorological and air quality variables motivates a lot of research in the atmospheric sciences and exposure assessment communities. An interesting related issue regards the relative predictive power that can be expected at different time scales, and whether it vanishes altogether at certain ranges. An improved understanding of our predictive powers enables better environmental management and more efficient decision making processes. Fractal analysis is commonly used to characterize the self-affinity of time series. This work introduces the Continuous Wavelet Transform (CWT) fractal analysis method as a tool for assessing environmental time series predictability. The high temporal scale resolution of the CWT enables detailed information about the Hurst parameter, a common temporal fractality measure, and thus about time scale variations in predictability. We analyzed a few years records of half-hourly air pollution and meteorological time series from which the trivial seasonal and daily cycles were removed. We encountered a general trend of decreasing Hurst values from about 1.4 (good autocorrelation and predictability), in the sub-daily time scale to 0.5 (which implies complete randomness) in the monthly to seasonal scales. The air pollutants predictability follows that of the meteorological variables in the short time scales but is better at longer scales.

  7. Off-Policy Reinforcement Learning: Optimal Operational Control for Two-Time-Scale Industrial Processes.

    Science.gov (United States)

    Li, Jinna; Kiumarsi, Bahare; Chai, Tianyou; Lewis, Frank L; Fan, Jialu

    2017-12-01

    Industrial flow lines are composed of unit processes operating on a fast time scale and performance measurements known as operational indices measured at a slower time scale. This paper presents a model-free optimal solution to a class of two time-scale industrial processes using off-policy reinforcement learning (RL). First, the lower-layer unit process control loop with a fast sampling period and the upper-layer operational index dynamics at a slow time scale are modeled. Second, a general optimal operational control problem is formulated to optimally prescribe the set-points for the unit industrial process. Then, a zero-sum game off-policy RL algorithm is developed to find the optimal set-points by using data measured in real-time. Finally, a simulation experiment is employed for an industrial flotation process to show the effectiveness of the proposed method.

  8. Super-transient scaling in time-delay autonomous Boolean network motifs

    Energy Technology Data Exchange (ETDEWEB)

    D' Huys, Otti, E-mail: otti.dhuys@phy.duke.edu; Haynes, Nicholas D. [Department of Physics, Duke University, Durham, North Carolina 27708 (United States); Lohmann, Johannes [Department of Physics, Duke University, Durham, North Carolina 27708 (United States); Institut für Theoretische Physik, Technische Universität Berlin, Hardenbergstraße 36, 10623 Berlin (Germany); Gauthier, Daniel J. [Department of Physics, Duke University, Durham, North Carolina 27708 (United States); Department of Physics, The Ohio State University, Columbus, Ohio 43210 (United States)

    2016-09-15

    Autonomous Boolean networks are commonly used to model the dynamics of gene regulatory networks and allow for the prediction of stable dynamical attractors. However, most models do not account for time delays along the network links and noise, which are crucial features of real biological systems. Concentrating on two paradigmatic motifs, the toggle switch and the repressilator, we develop an experimental testbed that explicitly includes both inter-node time delays and noise using digital logic elements on field-programmable gate arrays. We observe transients that last millions to billions of characteristic time scales and scale exponentially with the amount of time delays between nodes, a phenomenon known as super-transient scaling. We develop a hybrid model that includes time delays along network links and allows for stochastic variation in the delays. Using this model, we explain the observed super-transient scaling of both motifs and recreate the experimentally measured transient distributions.

  9. REAL-TIME VIDEO SCALING BASED ON CONVOLUTION NEURAL NETWORK ARCHITECTURE

    OpenAIRE

    S Safinaz; A V Ravi Kumar

    2017-01-01

    In recent years, video super resolution techniques becomes mandatory requirements to get high resolution videos. Many super resolution techniques researched but still video super resolution or scaling is a vital challenge. In this paper, we have presented a real-time video scaling based on convolution neural network architecture to eliminate the blurriness in the images and video frames and to provide better reconstruction quality while scaling of large datasets from lower resolution frames t...

  10. A time-scale analysis of systematic risk: wavelet-based approach

    OpenAIRE

    Khalfaoui Rabeh, K; Boutahar Mohamed, B

    2011-01-01

    The paper studies the impact of different time-scales on the market risk of individual stock market returns and of a given portfolio in Paris Stock Market by applying the wavelet analysis. To investigate the scaling properties of stock market returns and the lead/lag relationship between them at different scales, wavelet variance and crosscorrelations analyses are used. According to wavelet variance, stock returns exhibit long memory dynamics. The wavelet cross-correlation analysis s...

  11. Conceptual design report for the mechanical disassembly of Fort St. Vrain fuel elements

    International Nuclear Information System (INIS)

    Lord, D.L.; Wadsworth, D.C.; Sekot, J.P.; Skinner, K.L.

    1993-04-01

    A conceptual design study was prepared that: (1) reviewed the operations necessary to perform the mechanical disassembly of Fort St. Vrain fuel elements; (2) contained a description and survey of equipment capable of performing the necessary functions; and (3) performed a tradeoff study for determining the preferred concepts and equipment specifications. A preferred system was recommended and engineering specifications for this system were developed

  12. Disassembly Properties of Cementitious Finish Joints Using an Induction Heating Method

    Directory of Open Access Journals (Sweden)

    Jaecheol Ahn

    2015-05-01

    Full Text Available Efficient maintenance and upgrading of a building during its lifecycle are difficult because a cementitious finish uses materials and parts with low disassembly properties. Additionally, the reuse and recycling processes during building demolition also present numerous problems from the perspective of environmental technology. In this study, an induction heating (IH method was used to disassemble cementitious finish joints, which are widely used to join building members and materials. The IH rapidly and selectively heated and weakened these joints. The temperature elevation characteristics of the cementitious joint materials were measured as a function of several resistor types, including wire meshes and punching metals, which are usually used for cementitious finishing. The disassembly properties were evaluated through various tests using conductive resistors in cementitious joints such as mortar. When steel fiber, punching metal, and wire mesh were used as conductive resistors, the cementitious modifiers could be weakened within 30 s. Cementitious joints with conductive resistors also showed complete disassembly with little residual bond strength.

  13. Improved Nondestructive Disassembly Process using Augmented Reality and RFID Product/Part Tracking

    Directory of Open Access Journals (Sweden)

    Ile Mircheski

    2017-11-01

    Full Text Available The waste from electric and electronic equipment and discarded automobiles in the past grew rapidly and resulted with waste in billions of tones. The aim of this paper is to present an improved non-destructive disassembly process of electromechanical products using augmented reality based devices, such as glasses, tablets or mobile phones, and RFID technology for valuable product/part tracking. The proposed method includes tagging of components of interest in the product assembly by using a RFID tag. The valuable product is marked with specific ID number written in the RFID tag, in order to declare the product. The relevant data such as material and weight of components, guidelines for non-destructive disassembly for the valuable product and removing of component of interest will be obtained with the assistance of RFID tag and a centralized database. This modular system offers guidelines for the non-destructive disassembly process for obtaining valuable component of interest intended for easy repairs, remanufacture, reuse or recycling. The guidelines are in video presentation format using augmented reality for easy visualization of non-destructive disassembly process. The benefits of proposed modular system includes biggest percentage of reuse of the valuable components, easy maintaining, improved material recycling, environmental protection and greater total return form end of life products.

  14. Cellular Mechanisms Regulating Ciliary Disassembly and EMT: Roles of Ion Transport and Implications for Cancer

    DEFF Research Database (Denmark)

    Malinda, Raj Rajeshwar

    presented in paper I of this thesis provide new insight into the molecular mechanisms of ciliary disassembly by demonstrating a critical role for PDGFRmediated PLCγ- and Ca2+ signaling in this process. Findings presented in paper II show that acid extruding ion transporters are upregulated, while merlin...

  15. DISA- a computer code for accident analysis of fast reactor during disassembly phase

    International Nuclear Information System (INIS)

    Yadav, R.D.S.; Gupta, H.P.

    2005-01-01

    Analysis of the hypothetical transients in fast rectors that result in the disassembly of the reactor generally consists of three phases. In the phase-l, some initiating event like control rod ejection, coolant pump failure etc. is assumed to have taken place which leads the reactor to prompt critical state where fuel melting, sodium voiding etc. take place. In fast reactor normally the fuel is not in the optimum shape and further positive reactivity may be introduced into the system due to fuel melting. Fuel slumping is assumed to take place in this phase. If prompt criticality is reached as a result of the first phase, then disassembly phase is assumed to start. In this phase the neutron transient is followed till it is terminated by the disassembly of the core which takes place due to generation of high pressure gradients and which lead the core material to move from more worth region to less worth region. Doppler feed back is taken into account and reactivity feedback due to material movement is calculated by solving the hydrodynamics equations. The third phase will calculate the effect of this transient on the reactor vessel and containment. A computer code DISA for fast reactor DISAssembly phase, which is similar to the well known code VENUS has been developed. (author)

  16. Mastering Uncertainty and Risk at Multiple Time Scales in the Future Electrical Grid

    Energy Technology Data Exchange (ETDEWEB)

    Chertkov, Michael [Los Alamos National Laboratory; Bent, Russell W. [Los Alamos National Laboratory; Backhaus, Scott N. [Los Alamos National Laboratory

    2012-07-10

    Today's electrical grids enjoy a relatively clean separation of spatio-temporal scales yielding a compartmentalization of grid design, optimization, control and risk assessment allowing for the use of conventional mathematical tools within each area. In contrast, the future grid will incorporate time-intermittent renewable generation, operate via faster electrical markets, and tap the latent control capability at finer grid modeling scales; creating a fundamentally new set of couplings across spatiotemporal scales and requiring revolutionary advances in mathematics techniques to bridge these scales. One example is found in decade-scale grid expansion planning in which today's algorithms assume accurate load forecasts and well-controlled generation. Incorporating intermittent renewable generation creates fluctuating network flows at the hourly time scale, inherently linking the ability of a transmission line to deliver electrical power to hourly operational decisions. New operations-based planning algorithms are required, creating new mathematical challenges. Spatio-temporal scales are also crossed when the future grid's minute-scale fluctuations in network flows (due to intermittent generation) create a disordered state upon which second-scale transient grid dynamics propagate effectively invalidating today's on-line dynamic stability analyses. Addressing this challenge requires new on-line algorithms that use large data streams from new grid sensing technologies to physically aggregate across many spatial scales to create responsive, data-driven dynamic models. Here, we sketch the mathematical foundations of these problems and potential solutions.

  17. Principles of 5D modeling, full integration of 3D space, time and scale

    NARCIS (Netherlands)

    Van Oosterom, P.; Stoter, J.

    2012-01-01

    This paper proposes an approach for data modelling in five dimensions. Apart from three dimensions for geometrical representation and a fourth dimension for time, we identify scale as fifth dimensional characteristic. Considering scale as an extra dimension of geographic information, fully

  18. Glottal closure instant and voice source analysis using time-scale ...

    Indian Academy of Sciences (India)

    Time-scale analysis entertains close relationships with auditory perception. According to the tonotopic organisation of the inner ear, the first stages of auditory perception can be modelled using a non-uniform filterbank. These auditory filters are organized according to some sort of psychological scale, such as third-octave, ...

  19. Time scales of porphyry Cu deposit formation: insights from titanium diffusion in quartz

    Science.gov (United States)

    Mercer, Celestine N.; Reed, Mark H.; Mercer, Cameron M.

    2015-01-01

    Porphyry dikes and hydrothermal veins from the porphyry Cu-Mo deposit at Butte, Montana, contain multiple generations of quartz that are distinct in scanning electron microscope-cathodoluminescence (SEM-CL) images and in Ti concentrations. A comparison of microprobe trace element profiles and maps to SEM-CL images shows that the concentration of Ti in quartz correlates positively with CL brightness but Al, K, and Fe do not. After calibrating CL brightness in relation to Ti concentration, we use the brightness gradient between different quartz generations as a proxy for Ti gradients that we model to determine time scales of quartz formation and cooling. Model results indicate that time scales of porphyry magma residence are ~1,000s of years and time scales from porphyry quartz phenocryst rim formation to porphyry dike injection and cooling are ~10s of years. Time scales for the formation and cooling of various generations of hydrothermal vein quartz range from 10s to 10,000s of years. These time scales are considerably shorter than the ~0.6 m.y. overall time frame for each porphyry-style mineralization pulse determined from isotopic studies at Butte, Montana. Simple heat conduction models provide a temporal reference point to compare chemical diffusion time scales, and we find that they support short dike and vein formation time scales. We interpret these relatively short time scales to indicate that the Butte porphyry deposit formed by short-lived episodes of hydrofracturing, dike injection, and vein formation, each with discrete thermal pulses, which repeated over the ~3 m.y. generation of the deposit.

  20. Bridging time scales in cellular decision making with a stochastic bistable switch

    Directory of Open Access Journals (Sweden)

    Waldherr Steffen

    2010-08-01

    Full Text Available Abstract Background Cellular transformations which involve a significant phenotypical change of the cell's state use bistable biochemical switches as underlying decision systems. Some of these transformations act over a very long time scale on the cell population level, up to the entire lifespan of the organism. Results In this work, we aim at linking cellular decisions taking place on a time scale of years to decades with the biochemical dynamics in signal transduction and gene regulation, occuring on a time scale of minutes to hours. We show that a stochastic bistable switch forms a viable biochemical mechanism to implement decision processes on long time scales. As a case study, the mechanism is applied to model the initiation of follicle growth in mammalian ovaries, where the physiological time scale of follicle pool depletion is on the order of the organism's lifespan. We construct a simple mathematical model for this process based on experimental evidence for the involved genetic mechanisms. Conclusions Despite the underlying stochasticity, the proposed mechanism turns out to yield reliable behavior in large populations of cells subject to the considered decision process. Our model explains how the physiological time constant may emerge from the intrinsic stochasticity of the underlying gene regulatory network. Apart from ovarian follicles, the proposed mechanism may also be of relevance for other physiological systems where cells take binary decisions over a long time scale.

  1. Insights from inside the spinodal: Bridging thermalization time scales with smoothed particle hydrodynamics

    Science.gov (United States)

    Pütz, Martin; Nielaba, Peter

    2016-08-01

    We report the influence of the strength of heat bath coupling on the demixing behavior in spinodal decomposing one component liquid-vapor systems. The smoothed particle hydrodynamics (SPH) method with a van der Waals equation of state is used for the simulation. A thermostat for SPH is introduced that is based on the Berendsen thermostat. It controls the strength of heat bath coupling and allows for quenches with exponential temperature decay at a certain thermalization time scale. The present method allows us to bridge several orders of magnitude in the thermalization time scale. The early stage is highly affected by the choice of time scale. A transition from exponential growth to a 1 /2 ordinary power law scaling in the characteristic lengths is observed. At high initial temperatures the growth is logarithmic. The comparison with pure thermal simulations reveals latent heat to raise the mean system temperature. Large thermalization time scales and thermal conductivity are figured out to affect a stagnation of heating, which is explained with convective processes. Furthermore, large thermalization time scales are responsible for a stagnation of growth of domains, which is temporally embedded between early and late stage of phase separation. Therefore, it is considered as an intermediate stage. We present an aspect concerning this stage, namely that choosing larger thermalization time scales increases the duration. Moreover, it is observed that diffuse interfaces are formed during this stage, provided that the stage is apparent. We show that the differences in the evolution between pure thermal simulations and simulations with an instantaneously scaled mean temperature can be explained by the thermalization process, since a variation of the time scale allows for the bridging between these cases of limit.

  2. Time-scale invariances in preseismic electromagnetic radiation, magnetization and damage evolution of rocks

    Directory of Open Access Journals (Sweden)

    Y. Kawada

    2007-10-01

    Full Text Available We investigate the time-scale invariant changes in electromagnetic and mechanical energy releases prior to a rock failure or a large earthquake. The energy release processes are caused by damage evolutions such as crack propagation, motion of charged dislocation, area-enlargement of sheared asperities and repetitive creep-rate changes. Damage mechanics can be used to represent the time-scale invariant evolutions of both brittle and plastic damages. Irreversible thermodynamics applied to the damage mechanics reveals that the damage evolution produces the variations in charge, dipole and electromagnetic signals in addition to mechanical energy release, and yields the time-scale invariant patterns of Benioff electromagnetic radiation and cumulative Benioff strain-release. The irreversible thermodynamic framework of damage mechanics is also applicable to the seismo-magnetic effect, and the time-scale invariance is recognized in the remanent magnetization change associated with damage evolution prior to a rock failure.

  3. Multiple time scale analysis of pressure oscillations in solid rocket motors

    Science.gov (United States)

    Ahmed, Waqas; Maqsood, Adnan; Riaz, Rizwan

    2018-03-01

    In this study, acoustic pressure oscillations for single and coupled longitudinal acoustic modes in Solid Rocket Motor (SRM) are investigated using Multiple Time Scales (MTS) method. Two independent time scales are introduced. The oscillations occur on fast time scale whereas the amplitude and phase changes on slow time scale. Hopf bifurcation is employed to investigate the properties of the solution. The supercritical bifurcation phenomenon is observed for linearly unstable system. The amplitude of the oscillations result from equal energy gain and loss rates of longitudinal acoustic modes. The effect of linear instability and frequency of longitudinal modes on amplitude and phase of oscillations are determined for both single and coupled modes. For both cases, the maximum amplitude of oscillations decreases with the frequency of acoustic mode and linear instability of SRM. The comparison of analytical MTS results and numerical simulations demonstrate an excellent agreement.

  4. Multiple time scales in modeling the incidence of infections acquired in intensive care units

    Directory of Open Access Journals (Sweden)

    Martin Wolkewitz

    2016-09-01

    Full Text Available Abstract Background When patients are admitted to an intensive care unit (ICU their risk of getting an infection will be highly depend on the length of stay at-risk in the ICU. In addition, risk of infection is likely to vary over calendar time as a result of fluctuations in the prevalence of the pathogen on the ward. Hence risk of infection is expected to depend on two time scales (time in ICU and calendar time as well as competing events (discharge or death and their spatial location. The purpose of this paper is to develop and apply appropriate statistical models for the risk of ICU-acquired infection accounting for multiple time scales, competing risks and the spatial clustering of the data. Methods A multi-center data base from a Spanish surveillance network was used to study the occurrence of an infection due to Methicillin-resistant Staphylococcus aureus (MRSA. The analysis included 84,843 patient admissions between January 2006 and December 2011 from 81 ICUs. Stratified Cox models were used to study multiple time scales while accounting for spatial clustering of the data (patients within ICUs and for death or discharge as competing events for MRSA infection. Results Both time scales, time in ICU and calendar time, are highly associated with the MRSA hazard rate and cumulative risk. When using only one basic time scale, the interpretation and magnitude of several patient-individual risk factors differed. Risk factors concerning the severity of illness were more pronounced when using only calendar time. These differences disappeared when using both time scales simultaneously. Conclusions The time-dependent dynamics of infections is complex and should be studied with models allowing for multiple time scales. For patient individual risk-factors we recommend stratified Cox regression models for competing events with ICU time as the basic time scale and calendar time as a covariate. The inclusion of calendar time and stratification by ICU

  5. Finite-Time and -Size Scalings in the Evaluation of Large Deviation Functions. Numerical Analysis in Continuous Time

    Science.gov (United States)

    Guevara Hidalgo, Esteban; Nemoto, Takahiro; Lecomte, Vivien

    Rare trajectories of stochastic systems are important to understand because of their potential impact. However, their properties are by definition difficult to sample directly. Population dynamics provide a numerical tool allowing their study, by means of simulating a large number of copies of the system, which are subjected to a selection rule that favors the rare trajectories of interest. However, such algorithms are plagued by finite simulation time- and finite population size- effects that can render their use delicate. Using the continuous-time cloning algorithm, we analyze the finite-time and finite-size scalings of estimators of the large deviation functions associated to the distribution of the rare trajectories. We use these scalings in order to propose a numerical approach which allows to extract the infinite-time and infinite-size limit of these estimators.

  6. Bounds of Double Integral Dynamic Inequalities in Two Independent Variables on Time Scales

    Directory of Open Access Journals (Sweden)

    S. H. Saker

    2011-01-01

    Full Text Available Our aim in this paper is to establish some explicit bounds of the unknown function in a certain class of nonlinear dynamic inequalities in two independent variables on time scales which are unbounded above. These on the one hand generalize and on the other hand furnish a handy tool for the study of qualitative as well as quantitative properties of solutions of partial dynamic equations on time scales. Some examples are considered to demonstrate the applications of the results.

  7. Time Scale Inequalities of the Ostrowski Type for Functions Differentiable on the Coordinates

    Directory of Open Access Journals (Sweden)

    Eze R. Nwaeze

    2018-01-01

    Full Text Available In 2016, some inequalities of the Ostrowski type for functions (of two variables differentiable on the coordinates were established. In this paper, we extend these results to an arbitrary time scale by means of a parameter λ∈0,1. The aforementioned results are regained for the case when the time scale T=R. Besides extension, our results are employed to the continuous and discrete calculus to get some new inequalities in this direction.

  8. Sodium removal disassembly and examination of the Fermi secondary sodium pump

    International Nuclear Information System (INIS)

    Maffei, H.P.; Funk, C.W.; Ballif, J.L.

    1974-01-01

    The Fermi secondary pump is a centrifugal single stage design. The pump had been operated more than 42,000 hours between 450 and 800 0 F. Sodium was drained from the pump in 1973 and the system was back filled with carbon dioxide. The pump was fabricated for 2.25 Cr-1 Mo Croloy steel. Prior to cleaning the pump was inerted and heated with 150 0 F nitrogen using the pump casing as the containment vessel. The water-vapor-nitrogen process was used in three increasing stages of water concentration. The hydrogen concentration in the discharge line was followed as an indicator of the sodium-water reaction rate. Upon completion of the hydrogen evolution, the pump was rinsed several times with hot water. Six pounds of sodium were removed from the pump during a process cycle of 79 hours including rinsing. The maximum pump temperature recorded was 175 0 F with no variation exceeding 10 0 F. The hydrogen concentration in the effluent provided a very satisfactory index for control of the reaction by adjustment of the water-vapor concentration feed to the system. Rinsing effectiveness was limited by a pool of water in the volute that was not drainable with the available system hook up. Sodium and its compounds were removed from all internal surfaces that could be observed by the first stage of disassembly. All such surfaces were coated with a black deposit. Areas above the sodium liquid level were coated with a vermillion colored oxide. Sodium was found on the (1) threads of the impeller nut lock screw, (2) impeller nut-tapered shaft interface, and (3) vapor deposited sodium was found in the oil seal

  9. Technical Report on the 6th Time Scale Algorithm Symposium and Tutorials

    Science.gov (United States)

    2016-03-29

    registered people, including 4 students , coming from more than 30 different countries participated to the 3 days of conference. The Tutorials (the...Algorithms for the international time scales UTC and UTCr, Dr. Panfilo, BIPM 11:30-11:50 Tea/ coffee break 11:50-12:35 National Time Scales, Dr...NRL 16:00-16:20 Tea/ Coffee Break 16:20-17:05 Algorithms for GNSS Time Transfer, Dr. Defraigne, ORB 17:05-17:50 Algorithms to support time

  10. Impact of sequential disorder on the scaling behavior of airplane boarding time

    Science.gov (United States)

    Baek, Yongjoo; Ha, Meesoon; Jeong, Hawoong

    2013-05-01

    Airplane boarding process is an example where disorder properties of the system are relevant to the emergence of universality classes. Based on a simple model, we present a systematic analysis of finite-size effects in boarding time, and propose a comprehensive view of the role of sequential disorder in the scaling behavior of boarding time against the plane size. Using numerical simulations and mathematical arguments, we find how the scaling behavior depends on the number of seat columns and the range of sequential disorder. Our results show that new scaling exponents can arise as disorder is localized to varying extents.

  11. The role of topography on catchment‐scale water residence time

    Science.gov (United States)

    McGuire, K.J.; McDonnell, Jeffery J.; Weiler, M.; Kendall, C.; McGlynn, B.L.; Welker, J.M.; Seibert, J.

    2005-01-01

    The age, or residence time, of water is a fundamental descriptor of catchment hydrology, revealing information about the storage, flow pathways, and source of water in a single integrated measure. While there has been tremendous recent interest in residence time estimation to characterize watersheds, there are relatively few studies that have quantified residence time at the watershed scale, and fewer still that have extended those results beyond single catchments to larger landscape scales. We examined topographic controls on residence time for seven catchments (0.085–62.4 km2) that represent diverse geologic and geomorphic conditions in the western Cascade Mountains of Oregon. Our primary objective was to determine the dominant physical controls on catchment‐scale water residence time and specifically test the hypothesis that residence time is related to the size of the basin. Residence times were estimated by simple convolution models that described the transfer of precipitation isotopic composition to the stream network. We found that base flow mean residence times for exponential distributions ranged from 0.8 to 3.3 years. Mean residence time showed no correlation to basin area (r2 organization (i.e., topography) rather than basin area controls catchment‐scale transport. Results from this study may provide a framework for describing scale‐invariant transport across climatic and geologic conditions, whereby the internal form and structure of the basin defines the first‐order control on base flow residence time.

  12. A hybrid procedure for MSW generation forecasting at multiple time scales in Xiamen City, China

    International Nuclear Information System (INIS)

    Xu, Lilai; Gao, Peiqing; Cui, Shenghui; Liu, Chun

    2013-01-01

    Highlights: ► We propose a hybrid model that combines seasonal SARIMA model and grey system theory. ► The model is robust at multiple time scales with the anticipated accuracy. ► At month-scale, the SARIMA model shows good representation for monthly MSW generation. ► At medium-term time scale, grey relational analysis could yield the MSW generation. ► At long-term time scale, GM (1, 1) provides a basic scenario of MSW generation. - Abstract: Accurate forecasting of municipal solid waste (MSW) generation is crucial and fundamental for the planning, operation and optimization of any MSW management system. Comprehensive information on waste generation for month-scale, medium-term and long-term time scales is especially needed, considering the necessity of MSW management upgrade facing many developing countries. Several existing models are available but of little use in forecasting MSW generation at multiple time scales. The goal of this study is to propose a hybrid model that combines the seasonal autoregressive integrated moving average (SARIMA) model and grey system theory to forecast MSW generation at multiple time scales without needing to consider other variables such as demographics and socioeconomic factors. To demonstrate its applicability, a case study of Xiamen City, China was performed. Results show that the model is robust enough to fit and forecast seasonal and annual dynamics of MSW generation at month-scale, medium- and long-term time scales with the desired accuracy. In the month-scale, MSW generation in Xiamen City will peak at 132.2 thousand tonnes in July 2015 – 1.5 times the volume in July 2010. In the medium term, annual MSW generation will increase to 1518.1 thousand tonnes by 2015 at an average growth rate of 10%. In the long term, a large volume of MSW will be output annually and will increase to 2486.3 thousand tonnes by 2020 – 2.5 times the value for 2010. The hybrid model proposed in this paper can enable decision makers to

  13. Double Scaling in the Relaxation Time in the β -Fermi-Pasta-Ulam-Tsingou Model

    Science.gov (United States)

    Lvov, Yuri V.; Onorato, Miguel

    2018-04-01

    We consider the original β -Fermi-Pasta-Ulam-Tsingou system; numerical simulations and theoretical arguments suggest that, for a finite number of masses, a statistical equilibrium state is reached independently of the initial energy of the system. Using ensemble averages over initial conditions characterized by different Fourier random phases, we numerically estimate the time scale of equipartition and we find that for very small nonlinearity it matches the prediction based on exact wave-wave resonant interaction theory. We derive a simple formula for the nonlinear frequency broadening and show that when the phenomenon of overlap of frequencies takes place, a different scaling for the thermalization time scale is observed. Our result supports the idea that the Chirikov overlap criterion identifies a transition region between two different relaxation time scalings.

  14. Validating a rapid-update satellite precipitation analysis across telescoping space and time scales

    Science.gov (United States)

    Turk, Francis Joseph; Sohn, Byung-Ju; Oh, Hyun-Jong; Ebert, Elizabeth E.; Levizzani, Vincenzo; Smith, Eric A.

    2009-09-01

    In order to properly utilize remotely sensed precipitation estimates in hydrometeorological applications, knowledge of the accuracy of the estimates are needed. However, relatively few ground validation networks operate with the necessary spatial density and time-resolution required for validation of high-resolution precipitation products (HRPP) generated at fine space and time scales (e.g., hourly accumulations produced on a 0.25° spatial scale). In this article, we examine over-land validation statistics for an operationally designed, meteorological satellite-based global rainfall analysis that blends intermittent passive microwave-derived rainfall estimates aboard a variety of low Earth-orbiting satellite platforms with sub-hourly time sampling capabilities of visible and infrared imagers aboard operational geostationary platforms. The validation dataset is comprised of raingauge data collected from the dense, nearly homogeneous, 1-min reporting Automated Weather Station (network of the Korean Meteorological Administration during the June to August 2000 summer monsoon season. The space-time RMS error, mean bias, and correlation matrices were computed using various time windows for the gauge averaging, centered about the satellite observation time. For ±10 min time window, a correlation of 0.6 was achieved at 0.1° spatial scale by averaging more than 3 days; coarsening the spatial scale to 1.8° produced the same correlation by averaging over 1 h. Finer than approximately 24-h and 1° time and space scales, respectively, a rapid decay of the error statistics was obtained by trading-off either spatial or time resolution. Beyond a daily time scale, the blended estimates were nearly unbiased and with an RMS error of no worse than 1 mm day-1.

  15. Weighing Scale-Based Pulse Transit Time is a Superior Marker of Blood Pressure than Conventional Pulse Arrival Time

    Science.gov (United States)

    Martin, Stephanie L.-O.; Carek, Andrew M.; Kim, Chang-Sei; Ashouri, Hazar; Inan, Omer T.; Hahn, Jin-Oh; Mukkamala, Ramakrishna

    2016-12-01

    Pulse transit time (PTT) is being widely pursued for cuff-less blood pressure (BP) monitoring. Most efforts have employed the time delay between ECG and finger photoplethysmography (PPG) waveforms as a convenient surrogate of PTT. However, these conventional pulse arrival time (PAT) measurements include the pre-ejection period (PEP) and the time delay through small, muscular arteries and may thus be an unreliable marker of BP. We assessed a bathroom weighing scale-like system for convenient measurement of ballistocardiography and foot PPG waveforms - and thus PTT through larger, more elastic arteries - in terms of its ability to improve tracking of BP in individual subjects. We measured “scale PTT”, conventional PAT, and cuff BP in humans during interventions that increased BP but changed PEP and smooth muscle contraction differently. Scale PTT tracked the diastolic BP changes well, with correlation coefficient of -0.80 ± 0.02 (mean ± SE) and root-mean-squared-error of 7.6 ± 0.5 mmHg after a best-case calibration. Conventional PAT was significantly inferior in tracking these changes, with correlation coefficient of -0.60 ± 0.04 and root-mean-squared-error of 14.6 ± 1.5 mmHg (p < 0.05). Scale PTT also tracked the systolic BP changes better than conventional PAT but not to an acceptable level. With further development, scale PTT may permit reliable, convenient measurement of BP.

  16. Low cytoplasmic pH reduces ER-Golgi trafficking and induces disassembly of the Golgi apparatus.

    Science.gov (United States)

    Soonthornsit, Jeerawat; Yamaguchi, Yoko; Tamura, Daisuke; Ishida, Ryuichi; Nakakoji, Yoko; Osako, Shiho; Yamamoto, Akitsugu; Nakamura, Nobuhiro

    2014-11-01

    The Golgi apparatus was dramatically disassembled when cells were incubated in a low pH medium. The cis-Golgi disassembled quickly, extended tubules and spread to the periphery of cells within 30 min. In contrast, medial- and trans-Golgi were fragmented in significantly larger structures of smaller numbers at a slower rate and remained largely in structures distinct from the cis-Golgi. Electron microscopy revealed the complete disassembly of the Golgi stack in low pH treated cells. The effect of low pH was reversible; the Golgi apparatus reassembled to form a normal ribbon-like structure within 1-2h after the addition of a control medium. The anterograde ER to Golgi transport and retrograde Golgi to ER transport were both reduced under low pH. Phospholipase A2 inhibitors (ONO, BEL) effectively suppressed the Golgi disassembly, suggesting that the phospholipase A2 was involved in the Golgi disassembly. Over-expression of Rab1, 2, 30, 33 and 41 also suppressed the Golgi disassembly under low pH, suggesting that they have protective role against Golgi disassembly. Low pH treatment reduced cytoplasmic pH, but not the luminal pH of the Golgi apparatus, strongly suggesting that reduction of the cytoplasmic pH triggered the Golgi disassembly. Because a lower cytoplasmic pH is induced in physiological or pathological conditions, disassembly of the Golgi apparatus and reduction of vesicular transport through the Golgi apparatus may play important roles in cell physiology and pathology. Furthermore, our findings indicated that low pH treatment can serve as an important tool to analyze the molecular mechanisms that support the structure and function of the Golgi apparatus. Copyright © 2014 Elsevier Inc. All rights reserved.

  17. Studying time of flight imaging through scattering media across multiple size scales (Conference Presentation)

    Science.gov (United States)

    Velten, Andreas

    2017-05-01

    Light scattering is a primary obstacle to optical imaging in a variety of different environments and across many size and time scales. Scattering complicates imaging on large scales when imaging through the atmosphere when imaging from airborne or space borne platforms, through marine fog, or through fog and dust in vehicle navigation, for example in self driving cars. On smaller scales, scattering is the major obstacle when imaging through human tissue in biomedical applications. Despite the large variety of participating materials and size scales, light transport in all these environments is usually described with very similar scattering models that are defined by the same small set of parameters, including scattering and absorption length and phase function. We attempt a study of scattering and methods of imaging through scattering across different scales and media, particularly with respect to the use of time of flight information. We can show that using time of flight, in addition to spatial information, provides distinct advantages in scattering environments. By performing a comparative study of scattering across scales and media, we are able to suggest scale models for scattering environments to aid lab research. We also can transfer knowledge and methodology between different fields.

  18. Overcoming time scale and finite size limitations to compute nucleation rates from small scale well tempered metadynamics simulations

    Science.gov (United States)

    Salvalaglio, Matteo; Tiwary, Pratyush; Maggioni, Giovanni Maria; Mazzotti, Marco; Parrinello, Michele

    2016-12-01

    Condensation of a liquid droplet from a supersaturated vapour phase is initiated by a prototypical nucleation event. As such it is challenging to compute its rate from atomistic molecular dynamics simulations. In fact at realistic supersaturation conditions condensation occurs on time scales that far exceed what can be reached with conventional molecular dynamics methods. Another known problem in this context is the distortion of the free energy profile associated to nucleation due to the small, finite size of typical simulation boxes. In this work the problem of time scale is addressed with a recently developed enhanced sampling method while contextually correcting for finite size effects. We demonstrate our approach by studying the condensation of argon, and showing that characteristic nucleation times of the order of magnitude of hours can be reliably calculated. Nucleation rates spanning a range of 10 orders of magnitude are computed at moderate supersaturation levels, thus bridging the gap between what standard molecular dynamics simulations can do and real physical systems.

  19. SP-100 reactor disassembly remote handling test program

    International Nuclear Information System (INIS)

    Wilson, C.E.; Potter, J.D.; Maiden, G.E.; Vader, D.P.

    1991-01-01

    This paper is presented as an overview of the remote handling equipment validation testing, which will be conducted before installation and use in the ground engineering test facility. This equipment will be used to defuel the SP-100 reactor core after removing it from the Test Assembly following nuclear testing. A series of full scale mock-up operational tests will be conducted at a Hanford Site facility to verify equipment design, operation, and capabilities

  20. Mixing and flushing time scales in the Azhikode Estuary, southwest coast of India

    Digital Repository Service at National Institute of Oceanography (India)

    Revichandran, C.; Pylee, A.

    Flushing time scales of the Azhikode Estuary, Kerala, India showed pronounced dry season and wet season signals as well as large inter-annual variation. Cumulative flushing time of the estuary varies from 4.8 tide cycles in April to 1.22 tide cycles...

  1. Modulation of SST, SSS over northern Bay of Bengal on ISO time scale

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, S.A.; Saha, S.K.; Pokhrel, S.; Sundar, D.; Dhakate, A.R.; Mahapatra, S.; Ali, S.; Chaudhari, H.S.; Shreeram, P.; Suneel, V.; Srikanth, A.S.; Suresh, R.R.V.

    hypothesize that the intra-seasonal rainfall variation modulates the amount of river discharge, which in turn modulates the salinity over northern Bay of Bengal on intra-seasonal time scale. Since surface warming always follows the surface freshening, the time...

  2. Time Scale Analysis of Interest Rate Spreads and Output Using Wavelets

    Directory of Open Access Journals (Sweden)

    Marco Gallegati

    2013-04-01

    Full Text Available This paper adds to the literature on the information content of different spreads for real activity by explicitly taking into account the time scale relationship between a variety of monetary and financial indicators (real interest rate, term and credit spreads and output growth. By means of wavelet-based exploratory data analysis we obtain richer results relative to the aggregate analysis by identifying the dominant scales of variation in the data and the scales and location at which structural breaks have occurred. Moreover, using the “double residuals” regression analysis on a scale-by-scale basis, we find that changes in the spread in several markets have different information content for output at different time frames. This is consistent with the idea that allowing for different time scales of variation in the data can provide a fruitful understanding of the complex dynamics of economic relationships between variables with non-stationary or transient components, certainly richer than those obtained using standard time domain methods.

  3. Dynamics of Bayesian non-Gaussian sensorimotor learning with multiple time scales

    Science.gov (United States)

    Zhou, Baohua; Hofmann, David; Sober, Samuel; Nemenman, Ilya

    Various theoretical and experimental studies have suggested that sensorimotor learning in animals happens on multiple time scales. In such models, animals can respond to perturbations quickly but keep memories for a long period of time. However, those previous models only focus on average learning behaviors. Here, we propose a model with multiple time scales that deals with the dynamics of whole behavior distributions. The model includes multiple memories, each with a non-Gaussian distribution and its own associated time scale. The memories are combined to generate a distribution of the desired motor command. Our model explains simultaneously the dynamics of distributions of the songbird vocal behaviors in various experiments, including adaptations after step changes or ramps in the error signals and dynamics of forgetting during the washout period, where an immediate sharp approach to the baseline is followed by a prolonged decay. This work was supported partially by NIH Grant # 1 R01 EB022872, and NIH Grant # NS084844.

  4. AGR-1 Irradiated Test Train Preliminary Inspection and Disassembly First Look

    Energy Technology Data Exchange (ETDEWEB)

    Paul Demkowicz; Lance Cole; Scott Ploger; Philip Winston; Binh Pham; Michael Abbott

    2011-01-01

    The AGR-1 irradiation experiment ended on November 6, 2009, after 620 effective full power days in the Advanced Test Reactor, achieving a peak burnup of 19.6% FIMA. The test train was shipped to the Materials and Fuels Complex in March 2010 for post-irradiation examination. The first PIE activities included non-destructive examination of the test train, followed by disassembly of the test train and individual capsules and detailed inspection of the capsule contents, including the fuel compacts and the graphite fuel holders. Dimensional measurements of the compacts, graphite holders, and steel capsules shells were performed using a custom vision measurement system (for outer diameters and lengths) and conventional bore gauges (for inner diameters). Gamma spectrometry of the intact test train gave a preliminary look at the condition of the interior components. No evidence of damage to compacts or graphite components was evident from the isotopic and gross gamma scans. Neutron radiography of the intact Capsule 2 showed a high degree of detail of interior components and confirmed the observation that there was no major damage to the capsule. Disassembly of the capsules was initiated using procedures qualified during out-of-cell mockup testing. Difficulties were encountered during capsule disassembly due to irradiation-induced changes in some of the capsule components’ properties, including embrittled niobium and molybdenum parts that were susceptible to fracture and swelling of the graphite fuel holders that affected their removal from the capsule shells. This required various improvised modifications to the disassembly procedure to avoid damage to the fuel compacts. Ultimately the capsule disassembly was successful and only one compact from Capsule 4 (out of 72 total in the test train) sustained damage during the disassembly process, along with the associated graphite holder. The compacts were generally in very good condition upon removal. Only relatively minor

  5. Wavelet-Based Multi-Scale Entropy Analysis of Complex Rainfall Time Series

    Directory of Open Access Journals (Sweden)

    Chien-Ming Chou

    2011-01-01

    Full Text Available This paper presents a novel framework to determine the number of resolution levels in the application of a wavelet transformation to a rainfall time series. The rainfall time series are decomposed using the à trous wavelet transform. Then, multi-scale entropy (MSE analysis that helps to elucidate some hidden characteristics of the original rainfall time series is applied to the decomposed rainfall time series. The analysis shows that the Mann-Kendall (MK rank correlation test of MSE curves of residuals at various resolution levels could determine the number of resolution levels in the wavelet decomposition. The complexity of rainfall time series at four stations on a multi-scale is compared. The results reveal that the suggested number of resolution levels can be obtained using MSE analysis and MK test. The complexity of rainfall time series at various locations can also be analyzed to provide a reference for water resource planning and application.

  6. Timing of millennial-scale climate change in Antarctica and Greenland during the last glacial period

    DEFF Research Database (Denmark)

    Blunier, T; Brook, E J

    2001-01-01

    A precise relative chronology for Greenland and West Antarctic paleotemperature is extended to 90,000 years ago, based on correlation of atmospheric methane records from the Greenland Ice Sheet Project 2 and Byrd ice cores. Over this period, the onset of seven major millennial-scale warmings in A....... This pattern provides further evidence for the operation of a "bipolar see-saw" in air temperatures and an oceanic teleconnection between the hemispheres on millennial time scales....

  7. Evaluating scaled windowed variance methods for estimating the Hurst coefficient of time series

    OpenAIRE

    Cannon, Michael J.; Percival, Donald B.; Caccia, David C.; Raymond, Gary M.; Bassingthwaighte, James B.

    1997-01-01

    Three-scaled windowed variance methods (standard, linear regression detrended, and brdge detrended) for estimating the Hurst coefficient (H) are evaluated. The Hurst coefficient, with 0 < H < 1, characterizes self-similar decay in the time-series autocorrelation function. The scaled windowed variance methods estimate H for fractional Brownian motion (fBm) signals which are cumulative sums of fractional Gaussian noise (fGn) signals. For all three methods both the bias and standard deviation of...

  8. An alcator-like confinement time scaling law derived from buckingham's PI theorem

    International Nuclear Information System (INIS)

    Roth, J.R.

    1983-01-01

    The unsatisfactory state of understanding of particle transport and confinement in tokamaks is well known. The best available theory, neoclassical transport, predicts a confinement time which scales as the square of the magnetic field, and inversely as the number density. Until recently, the best available phenomenological scaling law was the Alcator scaling law. This scaling law has recently been supplanted by the neoAlcator scaling law. Both of these expressions are unsatisfactory, because they not only are unsupported by any physical theory, but also their numerical constants are dimensional, suggesting that additional physical parameters need to be accounted for. A more firmly based scaling law can be derived from Buckingham's pi theorem. We adopt the particle confinement time as the dependent variable (derived dimension), and as independent variables (fundamental dimensions) we use the plasma volume, the average ion charge density, the ion current on the limiter, and the magnetic induction. From Buckingham's pi theorem, we obtain an equation which correctly predicts the absence of magnetic induction dependence, and the direct dependence on the ion density. The dependence on the product of the major radius and the plasma radius is intermediate between the original and neoAlcator scaling laws, and may be consistent with the data if the ion kinetic temperature and limiter area were accounted for

  9. Predicting Regional Drought on Sub-Seasonal to Decadal Time Scales

    Science.gov (United States)

    Schubert, Siegfried; Wang, Hailan; Suarez, Max; Koster, Randal

    2011-01-01

    Drought occurs on a wide range of time scales, and within a variety of different types of regional climates. It is driven foremost by an extended period of reduced precipitation, but it is the impacts on such quantities as soil moisture, streamflow and crop yields that are often most important from a users perspective. While recognizing that different users have different needs for drought information, it is nevertheless important to understand that progress in predicting drought and satisfying such user needs, largely hinges on our ability to improve predictions of precipitation. This talk reviews our current understanding of the physical mechanisms that drive precipitation variations on subseasonal to decadal time scales, and the implications for predictability and prediction skill. Examples are given highlighting the phenomena and mechanisms controlling precipitation on monthly (e.g., stationary Rossby waves, soil moisture), seasonal (ENSO) and decadal time scales (PD and AMO).

  10. Assembly, operation and disassembly manual for the Battelle Large Volume Water Sampler (BLVWS)

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, V.W.; Campbell, R.M.

    1984-12-01

    Assembly, operation and disassembly of the Battelle Large Volume Water Sampler (BLVWS) are described in detail. Step by step instructions of assembly, general operation and disassembly are provided to allow an operator completely unfamiliar with the sampler to successfully apply the BLVWS to his research sampling needs. The sampler permits concentration of both particulate and dissolved radionuclides from large volumes of ocean and fresh water. The water sample passes through a filtration section for particle removal then through sorption or ion exchange beds where species of interest are removed. The sampler components which contact the water being sampled are constructed of polyvinylchloride (PVC). The sampler has been successfully applied to many sampling needs over the past fifteen years. 9 references, 8 figures.

  11. A Trio-Rac1-PAK1 signaling axis drives invadopodia disassembly

    Science.gov (United States)

    Moshfegh, Yasmin; Bravo-Cordero, Jose Javier; Miskolci, Veronika; Condeelis, John; Hodgson, Louis

    2014-01-01

    Rho family GTPases control cell migration and participate in the regulation of cancer metastasis. Invadopodia, associated with invasive tumor cells, are crucial for cellular invasion and metastasis. To study Rac1 GTPase in invadopodia dynamics, we developed a genetically-encoded, single-chain Rac1 Fluorescence Resonance Energy Transfer (FRET) biosensor. The biosensor shows Rac1 activity exclusion from the core of invadopodia, and higher activity when invadopodia disappear, suggesting that reduced Rac1 activity is necessary for their stability, and Rac1 activation is involved in disassembly. Photoactivating Rac1 at invadopodia confirmed this previously-unknown Rac1 function. We built an invadopodia disassembly model, where a signaling axis involving TrioGEF, Rac1, PAK1, and phosphorylation of cortactin, causing invadopodia dissolution. This mechanism is critical for the proper turnover of invasive structures during tumor cell invasion, where a balance of proteolytic activity and locomotory protrusions must be carefully coordinated to achieve a maximally invasive phenotype. PMID:24859002

  12. Assembly, operation and disassembly manual for the Battelle Large Volume Water Sampler (BLVWS)

    International Nuclear Information System (INIS)

    Thomas, V.W.; Campbell, R.M.

    1984-12-01

    Assembly, operation and disassembly of the Battelle Large Volume Water Sampler (BLVWS) are described in detail. Step by step instructions of assembly, general operation and disassembly are provided to allow an operator completely unfamiliar with the sampler to successfully apply the BLVWS to his research sampling needs. The sampler permits concentration of both particulate and dissolved radionuclides from large volumes of ocean and fresh water. The water sample passes through a filtration section for particle removal then through sorption or ion exchange beds where species of interest are removed. The sampler components which contact the water being sampled are constructed of polyvinylchloride (PVC). The sampler has been successfully applied to many sampling needs over the past fifteen years. 9 references, 8 figures

  13. Cavity-Enhanced Real-Time Monitoring of Single-Charge Jumps at the Microsecond Time Scale

    Science.gov (United States)

    Arnold, C.; Loo, V.; Lemaître, A.; Sagnes, I.; Krebs, O.; Voisin, P.; Senellart, P.; Lanco, L.

    2014-04-01

    We use fast coherent reflectivity measurements, in a strongly coupled quantum dot micropillar device, to monitor in real time single-charge jumps at the microsecond time scale. Thanks to the strong enhancement of light-matter interaction inside the cavity, and to a close to shot-noise-limited detection setup, the measurement rate is 5 orders of magnitude faster than with previous optical experiments of direct single-charge sensing with quantum dots. The monitored transitions, identified at any given time with a less than 0.2% error probability, correspond to a carrier being captured and then released by a single material defect. This high-speed technique opens the way for the real-time monitoring of other rapid single quantum events, such as the quantum jumps of a single spin.

  14. Response of vegetation to drought time-scales across global land biomes.

    Science.gov (United States)

    Vicente-Serrano, Sergio M; Gouveia, Célia; Camarero, Jesús Julio; Beguería, Santiago; Trigo, Ricardo; López-Moreno, Juan I; Azorín-Molina, César; Pasho, Edmond; Lorenzo-Lacruz, Jorge; Revuelto, Jesús; Morán-Tejeda, Enrique; Sanchez-Lorenzo, Arturo

    2013-01-02

    We evaluated the response of the Earth land biomes to drought by correlating a drought index with three global indicators of vegetation activity and growth: vegetation indices from satellite imagery, tree-ring growth series, and Aboveground Net Primary Production (ANPP) records. Arid and humid biomes are both affected by drought, and we suggest that the persistence of the water deficit (i.e., the drought time-scale) could be playing a key role in determining the sensitivity of land biomes to drought. We found that arid biomes respond to drought at short time-scales; that is, there is a rapid vegetation reaction as soon as water deficits below normal conditions occur. This may be due to the fact that plant species of arid regions have mechanisms allowing them to rapidly adapt to changing water availability. Humid biomes also respond to drought at short time-scales, but in this case the physiological mechanisms likely differ from those operating in arid biomes, as plants usually have a poor adaptability to water shortage. On the contrary, semiarid and subhumid biomes respond to drought at long time-scales, probably because plants are able to withstand water deficits, but they lack the rapid response of arid biomes to drought. These results are consistent among three vegetation parameters analyzed and across different land biomes, showing that the response of vegetation to drought depends on characteristic drought time-scales for each biome. Understanding the dominant time-scales at which drought most influences vegetation might help assessing the resistance and resilience of vegetation and improving our knowledge of vegetation vulnerability to climate change.

  15. Computational Fluid Dynamics Study on the Effects of RATO Timing on the Scale Model Acoustic Test

    Science.gov (United States)

    Nielsen, Tanner; Williams, B.; West, Jeff

    2015-01-01

    The Scale Model Acoustic Test (SMAT) is a 5% scale test of the Space Launch System (SLS), which is currently being designed at Marshall Space Flight Center (MSFC). The purpose of this test is to characterize and understand a variety of acoustic phenomena that occur during the early portions of lift off, one being the overpressure environment that develops shortly after booster ignition. The SLS lift off configuration consists of four RS-25 liquid thrusters on the core stage, with two solid boosters connected to each side. Past experience with scale model testing at MSFC (in ER42), has shown that there is a delay in the ignition of the Rocket Assisted Take Off (RATO) motor, which is used as the 5% scale analog of the solid boosters, after the signal to ignite is given. This delay can range from 0 to 16.5ms. While this small of a delay maybe insignificant in the case of the full scale SLS, it can significantly alter the data obtained during the SMAT due to the much smaller geometry. The speed of sound of the air and combustion gas constituents is not scaled, and therefore the SMAT pressure waves propagate at approximately the same speed as occurs during full scale. However, the SMAT geometry is much smaller allowing the pressure waves to move down the exhaust duct, through the trench, and impact the vehicle model much faster than occurs at full scale. To better understand the effect of the RATO timing simultaneity on the SMAT IOP test data, a computational fluid dynamics (CFD) analysis was performed using the Loci/CHEM CFD software program. Five different timing offsets, based on RATO ignition delay statistics, were simulated. A variety of results and comparisons will be given, assessing the overall effect of RATO timing simultaneity on the SMAT overpressure environment.

  16. Underwater Nuclear Fuel Disassembly and Rod Storage Process and Equipment Description. Volume II

    International Nuclear Information System (INIS)

    Viebrock, J.M.

    1981-09-01

    The process, equipment, and the demonstration of the Underwater Nuclear Fuel Disassembly and Rod Storage System are presented. The process was shown to be a viable means of increasing spent fuel pool storage density by taking apart fuel assemblies and storing the fuel rods in a denser fashion than in the original storage racks. The assembly's nonfuel-bearing waste is compacted and containerized. The report documents design criteria and analysis, fabrication, demonstration program results, and proposed enhancements to the system

  17. Dynamic instabilities in the kinetics of growth and disassembly of microtubules

    OpenAIRE

    Katrukha, Eugene

    2016-01-01

    Dynamic instability of microtubules is considered using frameworks of non-linear thermodynamics and non-equilibrium reaction-diffusion systems. Stochastic assembly/disassembly phases in the polymerization dynamics of microtubules are treated as a result of collective clusterization of microdefects (holes in structure). The model explains experimentally observed power law dependence of catastrophe frequency from the microtubule growth rate. Additional reaction-diffusion-precipitation model is ...

  18. Rapid-mixing studies on the time-scale of radiation damage in cells

    International Nuclear Information System (INIS)

    Adams, G.E.; Michael, B.D.; Asquith, J.C.; Shenoy, M.A.; Watts, M.E.; Whillans, D.W.

    1975-01-01

    Rapid mixing studies were performed to determine the time scale of radiation damage in cells. There is evidence that the sensitizing effects of oxygen and other chemical dose-modifying agents on the response of cells to ionizing radiation involve fast free-radical processes. Fast response technique studies in bacterial systems have shown that extremely fast processes occur when the bacteria are exposed to oxygen or other dose-modifying agents during irradiation. The time scales observed were consistent with the involvement of fast free-radical reactions in the expression of these effects

  19. New Bounds of Ostrowski–Gruss Type Inequality for (k + 1 Points on Time Scales

    Directory of Open Access Journals (Sweden)

    Eze R. Nwaeze

    2017-11-01

    Full Text Available The aim of this paper is to present three new bounds of the Ostrowski--Gr\\"uss type inequality for points $x_0,x_1,x_2,\\cdots,x_k$ on time scales. Our results generalize result of Ng\\^o and Liu, and extend results of Ujevi\\'c to time scales with $(k+1$ points. We apply our results to the continuous, discrete, and quantum calculus to obtain many new interesting inequalities. An example is also considered. The estimates obtained in this paper will be very useful in numerical integration especially for the continuous case.

  20. What if the hand piece spring disassembles during robotic radical prostatectomy?

    Science.gov (United States)

    Akbulut, Ziya; Canda, Abdullah Erdem; Atmaca, Ali Fuat; Asil, Erem; Isgoren, Egemen; Balbay, Mevlana Derya

    2011-01-01

    Robot-assisted laparoscopic radical prostatectomy (RALRP) is successfully being performed for treating prostate cancer (PCa). However, instrumentation failure associated with robotic procedures represents a unique new problem. We report the successful completion of RALRP in spite of a disassembled hand piece spring during the procedure. A PubMed/Medline search was made concerning robotic malfunction and robot-assisted laparoscopic radical prostatectomy to discuss our experience. We performed RALRP in a 60-year-old male patient with localized PCa. During the procedure, the spring of the hand piece disassembled, and we were not able to reassemble it. We completed the procedure successfully however without fixing the disassembled hand piece spring. We were able to grasp tissue and needles when we brought our fingers together. The only movement we needed to do was to move fingers apart to release tissue or needles caught by robotic instrument. Although malfunction risk related to the da Vinci Surgical System seems to be very low, it might still occur. Sometimes, simple maneuvers may compensate for the failed function as occurred in our case. However, patients should be informed before the operation about the possibility of converting their procedure to laparoscopic or open due to robotic malfunction.

  1. Artificial biofilms establish the role of matrix interactions in staphylococcal biofilm assembly and disassembly

    Science.gov (United States)

    Stewart, Elizabeth J.; Ganesan, Mahesh; Younger, John G.; Solomon, Michael J.

    2015-01-01

    We demonstrate that the microstructural and mechanical properties of bacterial biofilms can be created through colloidal self-assembly of cells and polymers, and thereby link the complex material properties of biofilms to well understood colloidal and polymeric behaviors. This finding is applied to soften and disassemble staphylococcal biofilms through pH changes. Bacterial biofilms are viscoelastic, structured communities of cells encapsulated in an extracellular polymeric substance (EPS) comprised of polysaccharides, proteins, and DNA. Although the identity and abundance of EPS macromolecules are known, how these matrix materials interact with themselves and bacterial cells to generate biofilm morphology and mechanics is not understood. Here, we find that the colloidal self-assembly of Staphylococcus epidermidis RP62A cells and polysaccharides into viscoelastic biofilms is driven by thermodynamic phase instability of EPS. pH conditions that induce phase instability of chitosan produce artificial S. epidermidis biofilms whose mechanics match natural S. epidermidis biofilms. Furthermore, pH-induced solubilization of the matrix triggers disassembly in both artificial and natural S. epidermidis biofilms. This pH-induced disassembly occurs in biofilms formed by five additional staphylococcal strains, including three clinical isolates. Our findings suggest that colloidal self-assembly of cells and matrix polymers produces biofilm viscoelasticity and that biofilm control strategies can exploit this mechanism. PMID:26272750

  2. Design-only conceptual design report for pit disassembly and conversion facility. Rev 0

    Energy Technology Data Exchange (ETDEWEB)

    Zygmunt, S.; Christensen, L.; Richardson, C.

    1997-12-12

    This design-only conceptual design report (DOCDR) was prepared to support a funding request by the Department of Energy (DOE)-Office of Fissile Material Disposition (OFMD) for engineering design of the Pit Disassembly and Conversion Facility (PDCF) Project No. 99-D-141. The PDCF will be used to disassemble the nation`s inventory of surplus nuclear weapons pits and convert the plutonium recovered from those pits into a form suitable for storage, international inspection, and final disposition. The PDCF is a complex consisting of a hardened building that will contain the plutonium processes in a safe and secure manner, and conventional buildings and structures that will house support personnel, systems, and equipment. The PDCF uses the Advanced Recovery and Integrated Extraction System (ARIES), a low waste, modular pyroprocessing system to convert pits to plutonium oxide. The PDCF project consists of engineering and design, and construction of the buildings and structures, and engineering and design, procurement, installation, testing and start-up of equipment to disassemble pits and convert plutonium in pits to oxide form. The facility is planned to operate for 10 years, averaging 3.5 metric tons (3.86 tons) of plutonium metal per year. On conclusion of operations, the PDCF will be decontaminated and decommissioned.

  3. The controlled disassembly of mesostructured perovskites as an avenue to fabricating high performance nanohybrid catalysts

    Science.gov (United States)

    Wang, Yuan; Arandiyan, Hamidreza; Tahini, Hassan A.; Scott, Jason; Tan, Xin; Dai, Hongxing; Gale, Julian D.; Rohl, Andrew L.; Smith, Sean C.; Amal, Rose

    2017-05-01

    Versatile superstructures composed of nanoparticles have recently been prepared using various disassembly methods. However, little information is known on how the structural disassembly influences the catalytic performance of the materials. Here we show how the disassembly of an ordered porous La0.6Sr0.4MnO3 perovskite array, to give hexapod mesostructured nanoparticles, exposes a new crystal facet which is more active for catalytic methane combustion. On fragmenting three-dimensionally ordered macroporous (3DOM) structures in a controlled manner, via a process that has been likened to retrosynthesis, hexapod-shaped building blocks can be harvested which possess a mesostructured architecture. The hexapod-shaped perovskite catalyst exhibits excellent low temperature methane oxidation activity (T90%=438 °C reaction rate=4.84 × 10-7 mol m-2 s-1). First principle calculations suggest the fractures, which occur at weak joints within the 3DOM architecture, afford a large area of (001) surface that displays a reduced energy barrier for hydrogen abstraction, thereby facilitating methane oxidation.

  4. The controlled disassembly of mesostructured perovskites as an avenue to fabricating high performance nanohybrid catalysts.

    Science.gov (United States)

    Wang, Yuan; Arandiyan, Hamidreza; Tahini, Hassan A; Scott, Jason; Tan, Xin; Dai, Hongxing; Gale, Julian D; Rohl, Andrew L; Smith, Sean C; Amal, Rose

    2017-05-25

    Versatile superstructures composed of nanoparticles have recently been prepared using various disassembly methods. However, little information is known on how the structural disassembly influences the catalytic performance of the materials. Here we show how the disassembly of an ordered porous La 0.6 Sr 0.4 MnO 3 perovskite array, to give hexapod mesostructured nanoparticles, exposes a new crystal facet which is more active for catalytic methane combustion. On fragmenting three-dimensionally ordered macroporous (3DOM) structures in a controlled manner, via a process that has been likened to retrosynthesis, hexapod-shaped building blocks can be harvested which possess a mesostructured architecture. The hexapod-shaped perovskite catalyst exhibits excellent low temperature methane oxidation activity (T 90% =438 °C; reaction rate=4.84 × 10 -7  mol m -2  s -1 ). First principle calculations suggest the fractures, which occur at weak joints within the 3DOM architecture, afford a large area of (001) surface that displays a reduced energy barrier for hydrogen abstraction, thereby facilitating methane oxidation.

  5. Phosphorylation of p37 is important for Golgi disassembly at mitosis

    International Nuclear Information System (INIS)

    Kaneko, Yayoi; Tamura, Kaori; Totsukawa, Go; Kondo, Hisao

    2010-01-01

    Research highlights: → p37 is phosphorylated on Serine-56 and Threonine-59 by Cdc2 at mitosis. → Phosphorylated p37 does not bind to Golgi membranes. → p37 phosphorylation inhibits p97/p37-mediated Golgi membrane fusion. -- Abstract: In mammals, the Golgi apparatus is disassembled at early mitosis and reassembled at the end of mitosis. For Golgi disassembly, membrane fusion needs to be blocked. Golgi biogenesis requires two distinct p97ATPase-mediated membrane fusion, the p97/p47 and p97/p37 pathways. We previously reported that p47 phosphorylation on Serine-140 by Cdc2 results in mitotic inhibition of the p97/p47 pathway . In this study, we demonstrate that p37 is phosphorylated on Serine-56 and Threonine-59 by Cdc2 at mitosis, and this phosphorylated p37 does not bind to Golgi membranes. Using an in vitro Golgi reassembly assay, we show that mutated p37(S56D, T59D), which mimics mitotic phosphorylation, does not cause any cisternal regrowth, indicating that p37 phosphorylation inhibits the p97/p37 pathway. Our results demonstrate that p37 phosphorylation on Serine-56 and Threonine-59 is important for Golgi disassembly at mitosis.

  6. The non-catalytic domains of Drosophila katanin regulate its abundance and microtubule-disassembly activity.

    Directory of Open Access Journals (Sweden)

    Kyle D Grode

    Full Text Available Microtubule severing is a biochemical reaction that generates an internal break in a microtubule and regulation of microtubule severing is critical for cellular processes such as ciliogenesis, morphogenesis, and meiosis and mitosis. Katanin is a conserved heterodimeric ATPase that severs and disassembles microtubules, but the molecular determinants for regulation of microtubule severing by katanin remain poorly defined. Here we show that the non-catalytic domains of Drosophila katanin regulate its abundance and activity in living cells. Our data indicate that the microtubule-interacting and trafficking (MIT domain and adjacent linker region of the Drosophila katanin catalytic subunit Kat60 cooperate to regulate microtubule severing in two distinct ways. First, the MIT domain and linker region of Kat60 decrease its abundance by enhancing its proteasome-dependent degradation. The Drosophila katanin regulatory subunit Kat80, which is required to stabilize Kat60 in cells, conversely reduces the proteasome-dependent degradation of Kat60. Second, the MIT domain and linker region of Kat60 augment its microtubule-disassembly activity by enhancing its association with microtubules. On the basis of our data, we propose that the non-catalytic domains of Drosophila katanin serve as the principal sites of integration of regulatory inputs, thereby controlling its ability to sever and disassemble microtubules.

  7. Time-sliced perturbation theory for large scale structure I: general formalism

    Energy Technology Data Exchange (ETDEWEB)

    Blas, Diego; Garny, Mathias; Sibiryakov, Sergey [Theory Division, CERN, CH-1211 Genève 23 (Switzerland); Ivanov, Mikhail M., E-mail: diego.blas@cern.ch, E-mail: mathias.garny@cern.ch, E-mail: mikhail.ivanov@cern.ch, E-mail: sergey.sibiryakov@cern.ch [FSB/ITP/LPPC, École Polytechnique Fédérale de Lausanne, CH-1015, Lausanne (Switzerland)

    2016-07-01

    We present a new analytic approach to describe large scale structure formation in the mildly non-linear regime. The central object of the method is the time-dependent probability distribution function generating correlators of the cosmological observables at a given moment of time. Expanding the distribution function around the Gaussian weight we formulate a perturbative technique to calculate non-linear corrections to cosmological correlators, similar to the diagrammatic expansion in a three-dimensional Euclidean quantum field theory, with time playing the role of an external parameter. For the physically relevant case of cold dark matter in an Einstein-de Sitter universe, the time evolution of the distribution function can be found exactly and is encapsulated by a time-dependent coupling constant controlling the perturbative expansion. We show that all building blocks of the expansion are free from spurious infrared enhanced contributions that plague the standard cosmological perturbation theory. This paves the way towards the systematic resummation of infrared effects in large scale structure formation. We also argue that the approach proposed here provides a natural framework to account for the influence of short-scale dynamics on larger scales along the lines of effective field theory.

  8. Mucin-mediated nanocarrier disassembly for triggered uptake of oligonucleotides as a delivery strategy for the potential treatment of mucosal tumours

    Science.gov (United States)

    Martirosyan, A.; Olesen, M. J.; Fenton, R. A.; Kjems, J.; Howard, K. A.

    2016-06-01

    This work demonstrates gastric mucin-triggered nanocarrier disassembly for release of antisense oligonucleotides and consequent unassisted cellular entry as a novel oral delivery strategy. A fluorescence activation-based reporter system was used to investigate the interaction and mucin-mediated disassembly of chitosan-based nanocarriers containing a 13-mer DNA oligonucleotide with a flanked locked RNA nucleic acid gapmer design. Gastric mucins were shown to trigger gapmer release from nanocarriers that was dependent on the interaction time, mucin concentration and N : P ratio with a maximal release at N : P 10. In contrast to siRNA, naked gapmers exhibited uptake into mucus producing HT-MTX mono-cultures and HT-MTX co-cultured with the carcinoma epithelial cell line Caco-2. Importantly, in vivo gapmer uptake was observed in epithelial tissue 30 min post-injection in murine intestinal loops. The findings present a mucosal design-based system tailored for local delivery of oligonucleotides that may maximize the effectiveness of gene silencing therapeutics within tumours at mucosal sites.This work demonstrates gastric mucin-triggered nanocarrier disassembly for release of antisense oligonucleotides and consequent unassisted cellular entry as a novel oral delivery strategy. A fluorescence activation-based reporter system was used to investigate the interaction and mucin-mediated disassembly of chitosan-based nanocarriers containing a 13-mer DNA oligonucleotide with a flanked locked RNA nucleic acid gapmer design. Gastric mucins were shown to trigger gapmer release from nanocarriers that was dependent on the interaction time, mucin concentration and N : P ratio with a maximal release at N : P 10. In contrast to siRNA, naked gapmers exhibited uptake into mucus producing HT-MTX mono-cultures and HT-MTX co-cultured with the carcinoma epithelial cell line Caco-2. Importantly, in vivo gapmer uptake was observed in epithelial tissue 30 min post-injection in murine intestinal

  9. Time-variable gravity potential components for optical clock comparisons and the definition of international time scales

    Science.gov (United States)

    Voigt, C.; Denker, H.; Timmen, L.

    2016-12-01

    The latest generation of optical atomic clocks is approaching the level of one part in 1018 in terms of frequency stability and uncertainty. For clock comparisons and the definition of international time scales, a relativistic redshift effect of the clock frequencies has to be taken into account at a corresponding uncertainty level of about 0.1 m2 s-2 and 0.01 m in terms of gravity potential and height, respectively. Besides the predominant static part of the gravity potential, temporal variations must be considered in order to avoid systematic frequency shifts. Time-variable gravity potential components induced by tides and non-tidal mass redistributions are investigated with regard to the level of one part in 1018. The magnitudes and dominant time periods of the individual gravity potential contributions are investigated globally and for specific laboratory sites together with the related uncertainty estimates. The basics of the computation methods are presented along with the applied models, data sets and software. Solid Earth tides contribute by far the most dominant signal with a global maximum amplitude of 4.2 m2 s-2 for the potential and a range (maximum-to-minimum) of up to 1.3 and 10.0 m2 s-2 in terms of potential differences between specific laboratories over continental and intercontinental scales, respectively. Amplitudes of the ocean tidal loading potential can amount up to 1.25 m2 s-2, while the range of the potential between specific laboratories is 0.3 and 1.1 m2 s-2 over continental and intercontinental scales, respectively. These are the only two contributors being relevant at a 10-17 level. However, several other time-variable potential effects can particularly affect clock comparisons at the 10-18 level. Besides solid Earth pole tides, these are non-tidal mass redistributions in the atmosphere, the oceans and the continental water storage.

  10. Scales

    Science.gov (United States)

    Scales are a visible peeling or flaking of outer skin layers. These layers are called the stratum ... Scales may be caused by dry skin, certain inflammatory skin conditions, or infections. Examples of disorders that ...

  11. Volatility Clustering and Scaling for Financial Time Series due to Attractor Bubbling

    Science.gov (United States)

    Krawiecki, A.; Hołyst, J. A.; Helbing, D.

    2002-09-01

    A microscopic model of financial markets is considered, consisting of many interacting agents (spins) with global coupling and discrete-time heat bath dynamics, similar to random Ising systems. The interactions between agents change randomly in time. In the thermodynamic limit, the obtained time series of price returns show chaotic bursts resulting from the emergence of attractor bubbling or on-off intermittency, resembling the empirical financial time series with volatility clustering. For a proper choice of the model parameters, the probability distributions of returns exhibit power-law tails with scaling exponents close to the empirical ones.

  12. Time-scale effects on the gain-loss asymmetry in stock indices.

    Science.gov (United States)

    Sándor, Bulcsú; Simonsen, Ingve; Nagy, Bálint Zsolt; Néda, Zoltán

    2016-08-01

    The gain-loss asymmetry, observed in the inverse statistics of stock indices is present for logarithmic return levels that are over 2%, and it is the result of the non-Pearson-type autocorrelations in the index. These non-Pearson-type correlations can be viewed also as functionally dependent daily volatilities, extending for a finite time interval. A generalized time-window shuffling method is used to show the existence of such autocorrelations. Their characteristic time scale proves to be smaller (less than 25 trading days) than what was previously believed. It is also found that this characteristic time scale has decreased with the appearance of program trading in the stock market transactions. Connections with the leverage effect are also established.

  13. Data warehousing technologies for large-scale and right-time data

    DEFF Research Database (Denmark)

    Xiufeng, Liu

    , but big, tables with few columns, the presented triple-store spreads the data over more tables that may have many columns. The triple-store is optimized by an extensive use of bulk techniques, which makes it very efficient to insert and extract data. The DBMS-based solution makes it very flexible......This thesis is about data warehousing technologies for large-scale and right-time data. Today, due to the exponential growth of data, it has become a common practice for many enterprises to process hundreds of gigabytes of data per day. Traditionally, data warehousing populates data from...... heterogeneous sources into a central data warehouse (DW) by Extract-Transform-Load (ETL) at regular time intervals, e.g., monthly, weekly, or daily. But now, it becomes challenging for large-scale data, and hard to meet the near real-time/right-time business decisions. This thesis considers some...

  14. Linking Time and Space Scales in Distributed Hydrological Modelling - a case study for the VIC model

    Science.gov (United States)

    Melsen, Lieke; Teuling, Adriaan; Torfs, Paul; Zappa, Massimiliano; Mizukami, Naoki; Clark, Martyn; Uijlenhoet, Remko

    2015-04-01

    One of the famous paradoxes of the Greek philosopher Zeno of Elea (~450 BC) is the one with the arrow: If one shoots an arrow, and cuts its motion into such small time steps that at every step the arrow is standing still, the arrow is motionless, because a concatenation of non-moving parts does not create motion. Nowadays, this reasoning can be refuted easily, because we know that motion is a change in space over time, which thus by definition depends on both time and space. If one disregards time by cutting it into infinite small steps, motion is also excluded. This example shows that time and space are linked and therefore hard to evaluate separately. As hydrologists we want to understand and predict the motion of water, which means we have to look both in space and in time. In hydrological models we can account for space by using spatially explicit models. With increasing computational power and increased data availability from e.g. satellites, it has become easier to apply models at a higher spatial resolution. Increasing the resolution of hydrological models is also labelled as one of the 'Grand Challenges' in hydrology by Wood et al. (2011) and Bierkens et al. (2014), who call for global modelling at hyperresolution (~1 km and smaller). A literature survey on 242 peer-viewed articles in which the Variable Infiltration Capacity (VIC) model was used, showed that the spatial resolution at which the model is applied has decreased over the past 17 years: From 0.5 to 2 degrees when the model was just developed, to 1/8 and even 1/32 degree nowadays. On the other hand the literature survey showed that the time step at which the model is calibrated and/or validated remained the same over the last 17 years; mainly daily or monthly. Klemeš (1983) stresses the fact that space and time scales are connected, and therefore downscaling the spatial scale would also imply downscaling of the temporal scale. Is it worth the effort of downscaling your model from 1 degree to 1

  15. Time-scale effects on the gain-loss asymmetry in stock indices

    Science.gov (United States)

    Sándor, Bulcsú; Simonsen, Ingve; Nagy, Bálint Zsolt; Néda, Zoltán

    2016-08-01

    The gain-loss asymmetry, observed in the inverse statistics of stock indices is present for logarithmic return levels that are over 2 % , and it is the result of the non-Pearson-type autocorrelations in the index. These non-Pearson-type correlations can be viewed also as functionally dependent daily volatilities, extending for a finite time interval. A generalized time-window shuffling method is used to show the existence of such autocorrelations. Their characteristic time scale proves to be smaller (less than 25 trading days) than what was previously believed. It is also found that this characteristic time scale has decreased with the appearance of program trading in the stock market transactions. Connections with the leverage effect are also established.

  16. Implications of cosmic strings with time-varying tension on the CMB and large scale structure

    International Nuclear Information System (INIS)

    Ichikawa, Kazuhide; Takahashi, Tomo; Yamaguchi, Masahide

    2006-01-01

    We investigate cosmological evolution and implications of cosmic strings with time-dependent tension. We derive basic equations of time development of the correlation length and the velocity of such strings, based on the one-scale model. Then, we find that, in the case where the tension depends on some power of the cosmic time, cosmic strings with time-dependent tension goes into the scaling solution if the power is lower than a critical value. We also discuss cosmic microwave background anisotropy and matter power spectra produced by these strings. The constraints on their tensions from the Wilkinson microwave anisotropy probe (WMAP) 3 yr data and Sloan digital sky survey (SDSS) data are also given

  17. Scaling relation between earthquake magnitude and the departure time from P wave similar growth

    Science.gov (United States)

    Noda, Shunta; Ellsworth, William L.

    2016-01-01

    We introduce a new scaling relation between earthquake magnitude (M) and a characteristic of initial P wave displacement. By examining Japanese K-NET data averaged in bins partitioned by Mw and hypocentral distance, we demonstrate that the P wave displacement briefly displays similar growth at the onset of rupture and that the departure time (Tdp), which is defined as the time of departure from similarity of the absolute displacement after applying a band-pass filter, correlates with the final M in a range of 4.5 ≤ Mw ≤ 7. The scaling relation between Mw and Tdp implies that useful information on the final M can be derived while the event is still in progress because Tdp occurs before the completion of rupture. We conclude that the scaling relation is important not only for earthquake early warning but also for the source physics of earthquakes.

  18. A Systematic Multi-Time Scale Solution for Regional Power Grid Operation

    Science.gov (United States)

    Zhu, W. J.; Liu, Z. G.; Cheng, T.; Hu, B. Q.; Liu, X. Z.; Zhou, Y. F.

    2017-10-01

    Many aspects need to be taken into consideration in a regional grid while making schedule plans. In this paper, a systematic multi-time scale solution for regional power grid operation considering large scale renewable energy integration and Ultra High Voltage (UHV) power transmission is proposed. In the time scale aspect, we discuss the problem from month, week, day-ahead, within-day to day-behind, and the system also contains multiple generator types including thermal units, hydro-plants, wind turbines and pumped storage stations. The 9 subsystems of the scheduling system are described, and their functions and relationships are elaborated. The proposed system has been constructed in a provincial power grid in Central China, and the operation results further verified the effectiveness of the system.

  19. Spatiotemporal patterns of drought at various time scales in Shandong Province of Eastern China

    Science.gov (United States)

    Zuo, Depeng; Cai, Siyang; Xu, Zongxue; Li, Fulin; Sun, Wenchao; Yang, Xiaojing; Kan, Guangyuan; Liu, Pin

    2018-01-01

    The temporal variations and spatial patterns of drought in Shandong Province of Eastern China were investigated by calculating the standardized precipitation evapotranspiration index (SPEI) at 1-, 3-, 6-, 12-, and 24-month time scales. Monthly precipitation and air temperature time series during the period 1960-2012 were collected at 23 meteorological stations uniformly distributed over the region. The non-parametric Mann-Kendall test was used to explore the temporal trends of precipitation, air temperature, and the SPEI drought index. S-mode principal component analysis (PCA) was applied to identify the spatial patterns of drought. The results showed that an insignificant decreasing trend in annual total precipitation was detected at most stations, a significant increase of annual average air temperature occurred at all the 23 stations, and a significant decreasing trend in the SPEI was mainly detected at the coastal stations for all the time scales. The frequency of occurrence of extreme and severe drought at different time scales generally increased with decades; higher frequency and larger affected area of extreme and severe droughts occurred as the time scale increased, especially for the northwest of Shandong Province and Jiaodong peninsular. The spatial pattern of drought for SPEI-1 contains three regions: eastern Jiaodong Peninsular and northwestern and southern Shandong. As the time scale increased to 3, 6, and 12 months, the order of the three regions was transformed into another as northwestern Shandong, eastern Jiaodong Peninsular, and southern Shandong. For SPEI-24, the location identified by REOF1 was slightly shifted from northwestern Shandong to western Shandong, and REOF2 and REOF3 identified another two weak patterns in the south edge and north edge of Jiaodong Peninsular, respectively. The potential causes of drought and the impact of drought on agriculture in the study area have also been discussed. The temporal variations and spatial patterns

  20. AGR-2 Irradiated Test Train Preliminary Inspection and Disassembly First Look

    Energy Technology Data Exchange (ETDEWEB)

    Ploger, Scott [Idaho National Lab. (INL), Idaho Falls, ID (United States); Demkowciz, Paul [Idaho National Lab. (INL), Idaho Falls, ID (United States); Harp, Jason [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    The AGR 2 irradiation experiment began in June 2010 and was completed in October 2013. The test train was shipped to the Materials and Fuels Complex in July 2014 for post-irradiation examination (PIE). The first PIE activities included nondestructive examination of the test train, followed by disassembly of the test train and individual capsules and detailed inspection of the capsule contents, including the fuel compacts and their graphite fuel holders. Dimensional metrology was then performed on the compacts, graphite holders, and steel capsule shells. AGR 2 disassembly and metrology were performed with the same equipment used successfully on AGR 1 test train components. Gamma spectrometry of the intact test train gave a preliminary look at the condition of the interior components. No evidence of damage to compacts or graphite components was evident from the isotopic and gross gamma scans. Disassembly of the AGR 2 test train and its capsules was conducted rapidly and efficiently by employing techniques refined during the AGR 1 disassembly campaign. Only one major difficulty was encountered while separating the test train into capsules when thermocouples (of larger diameter than used in AGR 1) and gas lines jammed inside the through tubes of the upper capsules, which required new tooling for extraction. Disassembly of individual capsules was straightforward with only a few minor complications. On the whole, AGR 2 capsule structural components appeared less embrittled than their AGR 1 counterparts. Compacts from AGR 2 Capsules 2, 3, 5, and 6 were in very good condition upon removal. Only relatively minor damage or markings were visible using high resolution photographic inspection. Compact dimensional measurements indicated radial shrinkage between 0.8 to 1.7%, with the greatest shrinkage observed on Capsule 2 compacts that were irradiated at higher temperature. Length shrinkage ranged from 0.1 to 0.9%, with by far the lowest axial shrinkage on Capsule 3 compacts

  1. First-passage times in multiscale random walks: The impact of movement scales on search efficiency

    Science.gov (United States)

    Campos, Daniel; Bartumeus, Frederic; Raposo, E. P.; Méndez, Vicenç

    2015-11-01

    An efficient searcher needs to balance properly the trade-off between the exploration of new spatial areas and the exploitation of nearby resources, an idea which is at the core of scale-free Lévy search strategies. Here we study multiscale random walks as an approximation to the scale-free case and derive the exact expressions for their mean-first-passage times in a one-dimensional finite domain. This allows us to provide a complete analytical description of the dynamics driving the situation in which both nearby and faraway targets are available to the searcher, so the exploration-exploitation trade-off does not have a trivial solution. For this situation, we prove that the combination of only two movement scales is able to outperform both ballistic and Lévy strategies. This two-scale strategy involves an optimal discrimination between the nearby and faraway targets which is only possible by adjusting the range of values of the two movement scales to the typical distances between encounters. So, this optimization necessarily requires some prior information (albeit crude) about target distances or distributions. Furthermore, we found that the incorporation of additional (three, four, …) movement scales and its adjustment to target distances does not improve further the search efficiency. This allows us to claim that optimal random search strategies arise through the informed combination of only two walk scales (related to the exploitative and the explorative scales, respectively), expanding on the well-known result that optimal strategies in strictly uninformed scenarios are achieved through Lévy paths (or, equivalently, through a hierarchical combination of multiple scales).

  2. Sensitivity of the breastfeeding motivational measurement scale: a known group analysis of first time mothers.

    Science.gov (United States)

    Stockdale, Janine; Sinclair, Marlene; Kernohan, George; McCrum-Gardner, Evie; Keller, John

    2013-01-01

    Breastfeeding has immense public health value for mothers, babies, and society. But there is an undesirably large gap between the number of new mothers who undertake and persist in breastfeeding compared to what would be a preferred level of accomplishment. This gap is a reflection of the many obstacles, both physical and psychological, that confront new mothers. Previous research has illuminated many of these concerns, but research on this problem is limited in part by the unavailability of a research instrument that can measure the key differences between first-time mothers and experienced mothers, with regard to the challenges they face when breastfeeding and the instructional advice they require. An instrument was designed to measure motivational complexity associated with sustained breast feeding behaviour; the Breastfeeding Motivational Measurement Scale. It contains 51 self-report items (7 point Likert scale) that cluster into four categories related to perceived value of breast-feeding, confidence to succeed, factors that influence success or failure, and strength of intentions, or goal. However, this scale has not been validated in terms of its sensitivity to profile the motivation of new mothers and experienced mothers. This issue was investigated by having 202 breastfeeding mothers (100 first time mothers) fill out the scale. The analysis reported in this paper is a three factor solution consisting of value, midwife support, and expectancies for success that explained the characteristics of first time mothers as a known group. These results support the validity of the BMM scale as a diagnostic tool for research on first time mothers who are learning to breastfeed. Further research studies are required to further test the validity of the scale in additional subgroups.

  3. Towards a Unified Formulation of Dynamics and Thermodynamics I. From Microscopic to Macroscopic Time Scales

    Czech Academy of Sciences Publication Activity Database

    Durand, P.; Paidarová, Ivana

    2011-01-01

    Roč. 111, č. 2 (2011), s. 225-236 ISSN 0020-7608 R&D Projects: GA AV ČR IAA100400501; GA AV ČR IAA401870702 Institutional research plan: CEZ:AV0Z40400503 Keywords : Liouville equation * time scales * chemical kinetics and dynamics Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.357, year: 2011

  4. Fission time-scale from the measurement of pre-scission light ...

    Indian Academy of Sciences (India)

    Fission time-scale from pre-scission light particles and γ-ray multiplicities. Figure 1. Schematic representation of the experimental set-up (see text). light particle detectors used along with the data analysis can be found in [1]. In sum- mary, after the energy and efficiency calibration of the neutron spectra from NE213 liquid.

  5. Anti-control of chaos of single time-scale brushless DC motor.

    Science.gov (United States)

    Ge, Zheng-Ming; Chang, Ching-Ming; Chen, Yen-Sheng

    2006-09-15

    Anti-control of chaos of single time-scale brushless DC motors is studied in this paper. In order to analyse a variety of periodic and chaotic phenomena, we employ several numerical techniques such as phase portraits, bifurcation diagrams and Lyapunov exponents. Anti-control of chaos can be achieved by adding an external constant term or an external periodic term.

  6. Hardy inequality on time scales and its application to half-linear dynamic equations

    Directory of Open Access Journals (Sweden)

    Řehák Pavel

    2005-01-01

    Full Text Available A time-scale version of the Hardy inequality is presented, which unifies and extends well-known Hardy inequalities in the continuous and in the discrete setting. An application in the oscillation theory of half-linear dynamic equations is given.

  7. Principal and nonprincipal solutions of symplectic dynamic systems on time scales

    Directory of Open Access Journals (Sweden)

    Ondrej Dosly

    2000-01-01

    Full Text Available We establish the concept of the principal and nonprincipal solution for the so-called symplectic dynamic systems on time scales. We also present a brief survey of the history of these concept for differential and difference equations.

  8. Labour productivity, economies of scale and opening time in large retail establishments

    NARCIS (Netherlands)

    A.R. Thurik (Roy)

    1984-01-01

    textabstractDifferences in labour productivity are dealt with for large French retail establishments. Influences of scale, weekly opening time, assortment composition, wage rate and share of counter service are considered. The relationship used is a result of analyses in the field of small retail

  9. A singular perturbation theorem for evolution equations and time-scale arguments for structured population models

    NARCIS (Netherlands)

    Greiner, G.; Heesterbeek, J.A.P.; Metz, J.A.J.

    1994-01-01

    In this paper we present a generalization of a finite dimensional singular perturbation theorem to Banach spaces. From this we obtain sufficient conditions under which a faithful simplification by a time-scale argument is justified for age-structured models of slowly growing populations. An explicit

  10. A Visual Method of Time Scale Determination using a PC for Radio ...

    Indian Academy of Sciences (India)

    not easy to fit the light curve. In this paper, we proposed a method of light curve fitting on a PC machine, in which the theoretical exponential light curve is adopted to the observations using the least regression method. Using this method, anybody can fit the light curve and get the time scale by moving and clicking the mouse.

  11. Development and Preliminary Validation of the Time Management for Exercise Scale

    Science.gov (United States)

    Hellsten, Laurie-ann M.; Rogers, W. Todd

    2009-01-01

    The purpose of this study was to collect preliminary validity evidence for a time management scale for exercise. An initial pool of 91 items was developed from existing literature. Ten exercise/health psychologists evaluated each of the items in terms of relevance and representativeness. Forty-nine items met all criteria. Exploratory factor…

  12. Global Stability of Complex-Valued Genetic Regulatory Networks with Delays on Time Scales

    Directory of Open Access Journals (Sweden)

    Wang Yajing

    2016-01-01

    Full Text Available In this paper, the global exponential stability of complex-valued genetic regulatory networks with delays is investigated. Besides presenting conditions guaranteeing the existence of a unique equilibrium pattern, its global exponential stability is discussed. Some numerical examples for different time scales.

  13. A limit set trichotomy for order-preserving systems on time scales

    Directory of Open Access Journals (Sweden)

    Christian Poetzsche

    2004-04-01

    Full Text Available In this paper we derive a limit set trichotomy for abstract order-preserving 2-parameter semiflows in normal cones of strongly ordered Banach spaces. Additionally, to provide an example, Muller's theorem is generalized to dynamic equations on arbitrary time scales and applied to a model from population dynamics.

  14. Improving Building Performance at Urban Scale with a Framework for Real-time Data Sharing

    Energy Technology Data Exchange (ETDEWEB)

    Pang, Xiufeng; Hong, Tianzhen; Piette, Mary Ann

    2013-06-03

    This paper describes work in progress toward an urban-scale system aiming to reduce energy use in neighboring buildings by providing three components: a database for accessing past and present weather data from high quality weather stations; a network for communicating energy-saving strategies between building owners; and a set of modeling tools for real-time building energy simulation.

  15. Time-scale effects in the interaction between a large and a small herbivore

    NARCIS (Netherlands)

    Kuijper, D.P.J.; Beek, P.; Wieren, van S.E.; Bakker, J.P.

    2008-01-01

    In the short term, grazing will mainly affect plant biomass and forage quality. However, grazing can affect plant species composition by accelerating or retarding succession at longer time-scales. Few studies concerning interactions among herbivores have taken the change in plant species composition

  16. Arctic energy budget in relation to sea ice variability on monthly-to-annual time scales

    NARCIS (Netherlands)

    Krikken, F.; Hazeleger, W.

    2015-01-01

    The large decrease in Arctic sea ice in recent years has triggered a strong interest in Arctic sea ice predictions on seasonal-to-decadal time scales. Hence, it is important to understand physical processes that provide enhanced predictability beyond persistence of sea ice anomalies. This study

  17. Oscillation and nonoscillation for impulsive dynamic equations on certain time scales

    Directory of Open Access Journals (Sweden)

    Henderson Johnny

    2006-01-01

    Full Text Available We discuss the existence of oscillatory and nonoscillatory solutions for first-order impulsive dynamic equations on time scales with certain restrictions on the points of impulse. We will rely on the nonlinear alternative of Leray-Schauder type combined with a lower and upper solutions method.

  18. Eigenvalue Problems for Systems of Nonlinear Boundary Value Problems on Time Scales

    Directory of Open Access Journals (Sweden)

    Henderson J

    2007-01-01

    Full Text Available Values of λ are determined for which there exist positive solutions of the system of dynamic equations, , , for , satisfying the boundary conditions, , where is a time scale. A Guo-Krasnosel'skii fixed point-theorem is applied.

  19. Theoretical and Numerical Properties of a Gyrokinetic Plasma: Issues Related to Transport Time Scale Simulation

    International Nuclear Information System (INIS)

    Lee, W.W.

    2003-01-01

    Particle simulation has played an important role for the recent investigations on turbulence in magnetically confined plasmas. In this paper, theoretical and numerical properties of a gyrokinetic plasma as well as its relationship with magnetohydrodynamics (MHD) are discussed with the ultimate aim of simulating microturbulence in transport time scale using massively parallel computers

  20. Time scales: from Nabla calculus to Delta calculus and vice versa via duality

    OpenAIRE

    Caputo, M. Cristina

    2009-01-01

    In this note we show how one can obtain results from the nabla calculus from results on the delta calculus and vice versa via a duality argument. We provide applications of the main results to the calculus of variations on time scales.

  1. Quantifying particle dispersal in aquatic sediments at short time scales: model selection

    NARCIS (Netherlands)

    Meysman, F.J.R.; Malyuga, V.; Boudreau, B.P.; Middelburg, J.J.

    2008-01-01

    In a pulse-tracer experiment, a layer of tracer particles is added to the sediment-water interface, and the down-mixing of these particles is followed over a short time scale. Here, we compare different models (biodiffusion, telegraph, CTRW) to analyse the resulting tracer depth profiles. The

  2. Fission time-scale from the measurement of pre-scission light ...

    Indian Academy of Sciences (India)

    which are incorporated in the code JOANNE2 to extract fission time-scales and mean deformation of the saddle-to-scission emitter. The neutron, light charged particle and GDR γ-ray multiplicity data could be explained consistently. The emission of neutrons seems to be favoured towards larger deformation as compared to ...

  3. Time scales for spinodal decomposition in nuclear matter with pseudo-particle model

    International Nuclear Information System (INIS)

    Idier, D.; Benhassine, B.; Farine, M.; Remaud, B.; Sebille, F.

    1993-01-01

    Dynamical instabilities arising from fluctuations in the spinodal zone for nuclear matter are studied using a large variety of zero range interactions in the frame of a pseudo-particle model. Scale times for spinodal decomposition are extracted and a possible link with decomposition in real heavy-ion collisions is discussed. (author) 12 refs.; 6 figs.; 1 tab

  4. Assessment of the methods for determining net radiation at different time-scales of meteorological variables

    Directory of Open Access Journals (Sweden)

    Ni An

    2017-04-01

    Full Text Available When modeling the soil/atmosphere interaction, it is of paramount importance to determine the net radiation flux. There are two common calculation methods for this purpose. Method 1 relies on use of air temperature, while Method 2 relies on use of both air and soil temperatures. Nowadays, there has been no consensus on the application of these two methods. In this study, the half-hourly data of solar radiation recorded at an experimental embankment are used to calculate the net radiation and long-wave radiation at different time-scales (half-hourly, hourly, and daily using the two methods. The results show that, compared with Method 2 which has been widely adopted in agronomical, geotechnical and geo-environmental applications, Method 1 is more feasible for its simplicity and accuracy at shorter time-scale. Moreover, in case of longer time-scale, daily for instance, less variations of net radiation and long-wave radiation are obtained, suggesting that no detailed soil temperature variations can be obtained. In other words, shorter time-scales are preferred in determining net radiation flux.

  5. Extension of the astronomically calibrated (polarity) time scale to the Miocene/Pliocene boundary

    NARCIS (Netherlands)

    Hilgen, F.J.

    1991-01-01

    The early Pleistocene to late Pliocene astronormcally calibrated time scale of Shackleton et al. [1] and Hllgen [2] is extended to the Mlocene/Pllocene boundary This is done by correlating the detailed record of CaCO 3 cycles in the Trubl and the lower part of the overlying Narbone Formation

  6. Existence and global exponential stability of periodic solutions for n-dimensional neutral dynamic equations on time scales.

    Science.gov (United States)

    Li, Bing; Li, Yongkun; Zhang, Xuemei

    2016-01-01

    In this paper, by using the existence of the exponential dichotomy of linear dynamic equations on time scales and the theory of calculus on time scales, we study the existence and global exponential stability of periodic solutions for a class of n-dimensional neutral dynamic equations on time scales. We also present an example to illustrate the feasibility of our results. The results of this paper are completely new and complementary to the previously known results even in both the case of differential equations (time scale [Formula: see text]) and the case of difference equations (time scale [Formula: see text]).

  7. Evolution of equilibrium Pickering emulsions--a matter of time scales.

    Science.gov (United States)

    Kraft, Daniela J; Luigjes, Bob; de Folter, Julius W J; Philipse, Albert P; Kegel, Willem K

    2010-09-30

    A new class of equilibrium solid-stabilized oil-in-water emulsions harbors a competition of two processes on disparate time scales that affect the equilibrium droplet size in opposing ways. The aim of this work is to elucidate the molecular origins of these two time scales and demonstrate their effects on the evolution of the emulsion droplet size. First, spontaneous emulsification into particle-covered droplets occurs through in situ generation of surface-active molecules by hydrolysis of molecules of the oil phase. We show that surface tensions of the oil-water interfaces in the absence of stabilizing colloidal particles are connected to the concentration of these surface-active molecules, and hence also to the equilibrium droplet size in the presence of colloids. As a consequence, the hydrolysis process sets the time scale of formation of these solid-stabilized emulsions. A second time scale is governing the ultimate fate of the solid-stabilized equilibrium emulsions: by condensation of the in situ generated amphiphilic molecules onto the colloidal particles, their wetting properties change, leading to a gradual transfer from the aqueous to the oil phase via growth of the emulsion droplets. This migration is observed macroscopically by a color change of the water and oil phases, as well as by electron microscopy after polymerization of the oil phase in a phase separated sample. Surprisingly, the relative oil volume sets the time scale of particle transfer. Phase separation into an aqueous phase and an oil phase containing colloidal particles is influenced by sedimentation of the emulsion droplets. The two processes of formation of surface-active molecules through hydrolysis and condensation thereof on the colloidal surface have an opposite influence on the droplet size. By their interplay, a dynamic equilibrium is created where the droplet size always adjusts to the thermodynamically stable state.

  8. Robust scaling laws for energy confinement time, including radiated fraction, in Tokamaks

    Science.gov (United States)

    Murari, A.; Peluso, E.; Gaudio, P.; Gelfusa, M.

    2017-12-01

    In recent years, the limitations of scalings in power-law form that are obtained from traditional log regression have become increasingly evident in many fields of research. Given the wide gap in operational space between present-day and next-generation devices, robustness of the obtained models in guaranteeing reasonable extrapolability is a major issue. In this paper, a new technique, called symbolic regression, is reviewed, refined, and applied to the ITPA database for extracting scaling laws of the energy-confinement time at different radiated fraction levels. The main advantage of this new methodology is its ability to determine the most appropriate mathematical form of the scaling laws to model the available databases without the restriction of their having to be power laws. In a completely new development, this technique is combined with the concept of geodesic distance on Gaussian manifolds so as to take into account the error bars in the measurements and provide more reliable models. Robust scaling laws, including radiated fractions as regressor, have been found; they are not in power-law form, and are significantly better than the traditional scalings. These scaling laws, including radiated fractions, extrapolate quite differently to ITER, and therefore they require serious consideration. On the other hand, given the limitations of the existing databases, dedicated experimental investigations will have to be carried out to fully understand the impact of radiated fractions on the confinement in metallic machines and in the next generation of devices.

  9. The Chapman psychosis-proneness scales: Consistency across culture and time.

    Science.gov (United States)

    Chan, Raymond C K; Shi, Hai-song; Geng, Fu-lei; Liu, Wen-hua; Yan, Chao; Wang, Yi; Gooding, Diane C

    2015-07-30

    The purpose of the present study was to examine the factor structure and the temporal stability of the Chapman psychosis-proneness scales in a representative sample of nonclinical Chinese young adults. The four psychosis-proneness scales evaluated were the Perceptual Aberration (PAS), Magical Ideation (MIS), revised Social Anhedonia (RSAS), and revised Physical Anhedonia (RPAS) scales. The sample consisted of 1724 young adults with a mean age of 18.8 years (S.D. = 0.84). The results of the confirmatory factor analyses indicated that the best fitting model was a two-factor model with positive schizotypy (PER and MIS) scales and negative schizotypy (RSAS and RPAS) scales. The data add to the growing literature indicating that the measurement of schizotypal traits is consistent across cultures. In addition, the results support the measurement invariance of the Chapman psychosis-proneness scales across time, i.e., there was ample evidence of test-retest reliability over a test interval of 6 months. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  10. Energy impacts of recycling disassembly material in residential buildings

    International Nuclear Information System (INIS)

    Gao, Weijun; Ariyama, Takahiro; Ojima, Toshio; Meier, Alan

    2000-01-01

    In order to stop the global warmth due to the CO2 concentration, the energy use should be decreased. The investment of building construction industry in Japan is about 20 percent of GDP. This fraction is much higher than in most developed countries. That results the Japanese building construction industry including residential use consumes about one third of all energy and resources of the entire industrial sectors. In order to save energy as well as resource, the recycle of the building materials should be urgent to be carried out. In this paper, we focus on the potential energy savings with a simple calculated method when the building materials or products are manufactured from recycled materials. We examined three kinds of residential buildings with different construction techniques and estimated the decreased amount of energy consumption and resources resulting from use of recycled materials. The results have shown for most building materials, the energy consumption needed to remake housing materials from recycled materials is lower than that to make new housing materials. The energy consumption of building materials in all case-study housing can be saved by at least 10 percent. At the same time, the resource, measured by mass of building materials (kg) can be decreased by over 50 percent

  11. Multi-time Scale Joint Scheduling Method Considering the Grid of Renewable Energy

    Science.gov (United States)

    Zhijun, E.; Wang, Weichen; Cao, Jin; Wang, Xin; Kong, Xiangyu; Quan, Shuping

    2018-01-01

    Renewable new energy power generation prediction error like wind and light, brings difficulties to dispatch the power system. In this paper, a multi-time scale robust scheduling method is set to solve this problem. It reduces the impact of clean energy prediction bias to the power grid by using multi-time scale (day-ahead, intraday, real time) and coordinating the dispatching power output of various power supplies such as hydropower, thermal power, wind power, gas power and. The method adopts the robust scheduling method to ensure the robustness of the scheduling scheme. By calculating the cost of the abandon wind and the load, it transforms the robustness into the risk cost and optimizes the optimal uncertainty set for the smallest integrative costs. The validity of the method is verified by simulation.

  12. Periodic Solution of Second-Order Hamiltonian Systems with a Change Sign Potential on Time Scales

    Directory of Open Access Journals (Sweden)

    You-Hui Su

    2009-01-01

    Full Text Available This paper is concerned with the second-order Hamiltonian system on time scales 𝕋 of the form uΔΔ(ρ(t+μb(t|u(t|μ−2u(t+∇¯H(t,u(t=0, Δ-a.e. t∈[0,T]𝕋 , u(0−u(T=uΔ(ρ(0−uΔ(ρ(T=0, where 0,T∈𝕋. By using the minimax methods in critical theory, an existence theorem of periodic solution for the above system is established. As an application, an example is given to illustrate the result. This is probably the first time the existence of periodic solutions for second-order Hamiltonian system on time scales has been studied by critical theory.

  13. Measuring parent time scarcity and fatigue as barriers to meal planning and preparation: quantitative scale development.

    Science.gov (United States)

    Storfer-Isser, Amy; Musher-Eizenman, Dara

    2013-03-01

    To examine the psychometric properties of 9 quantitative items that assess time scarcity and fatigue as parent barriers to planning and preparing meals for their children. A convenience sample of 342 parents of children aged 2-6 years completed a 20-minute online survey. Exploratory factor analysis was used to examine the factor structure and create summary scales. Internal consistency reliability and measures of construct and concurrent validity were assessed. Two scales were created based on the factor analysis: time and energy for meals and meal planning. Preliminary evidence suggests that both scales are reliable and valid. The time and energy for meals and meal planning scales can be completed quickly by busy and tired parents. As many children do not eat nutritious diets, a better understanding of the barriers that parents face is critical and may help inform interventions tailored to the needs of tired, busy parents. Copyright © 2013 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  14. Hepatic angiomyolipoma: contrast patterns with SonoVue-enhanced real-time gray-scale ultrasonography.

    Science.gov (United States)

    Wei, Rui-Xue; Wang, Wen-Ping; Ding, Hong; Huang, Bei-Jian; Li, Chao-Lun; Fan, Pei-Li; Hou, Jun; He, Nian-An

    2012-01-01

    This study was conducted to retrospectively evaluate the pattern of contrast enhancement with SonoVue on gray-scale ultrasonography of hepatic angiomyolipoma (HAML). Imaging features of 33 pathologically proven HAML lesions in 33 patients who underwent baseline ultrasound and contrast-enhanced ultrasonography (CEUS) were assessed retrospectively. All lesions were enhanced in the arterial phase and showed whole-tumor filling in. Thirty-two of 33 (97%) lesions showed early positive enhancement in the arterial phase. Twenty-three of these exhibited isoechoic or hyperechoic features in the portal phase. HAML demonstrate characteristic manifestations with SonoVue-enhanced real-time gray-scale ultrasonography.

  15. Controller Design of Multiinput Multioutput Time-Delay Large-Scale System

    Directory of Open Access Journals (Sweden)

    Chia-Wei Lin

    2013-01-01

    Full Text Available The paper presents a novel feedback linearization controller of nonlinear multiinput multioutput time-delay large-scale systems to obtain both the tracking and almost disturbance decoupling (ADD performances. The significant contribution of this paper is to build up a control law such that the overall closed-loop system is stable for given initial condition and bounded tracking trajectory with the input-to-state-stability characteristic and almost disturbance decoupling performance. We have simulated the two-inverted-pendulum system coupled by a spring for networked control systems which has been used as a test bed for the study of decentralized control of large-scale systems.

  16. Multi-scale anomaly detection algorithm based on infrequent pattern of time series

    Science.gov (United States)

    Chen, Xiao-Yun; Zhan, Yan-Yan

    2008-04-01

    In this paper, we propose two anomaly detection algorithms PAV and MPAV on time series. The first basic idea of this paper defines that the anomaly pattern is the most infrequent time series pattern, which is the lowest support pattern. The second basic idea of this paper is that PAV detects directly anomalies in the original time series, and MPAV algorithm extraction anomaly in the wavelet approximation coefficient of the time series. For complexity analyses, as the wavelet transform have the functions to compress data, filter noise, and maintain the basic form of time series, the MPAV algorithm, while maintaining the accuracy of the algorithm improves the efficiency. As PAV and MPAV algorithms are simple and easy to realize without training, this proposed multi-scale anomaly detection algorithm based on infrequent pattern of time series can therefore be proved to be very useful for computer science applications.

  17. Measuring time attitudes in Slovenia: Psychometric proprieties of the Adolescent and Adult Time Attitude Scale (AATI-TA

    Directory of Open Access Journals (Sweden)

    Mojca Juriševič

    2017-11-01

    Full Text Available In the present study, we examined the psychometric properties of scores on the newly developed Slovenian version of the Adolescent and Adult Time Inventory-Time Attitudes Scale (AATI-TA in a sample of 182 Slovenian adolescents. The 30-item AATI-TA assesses positive and negative attitudes towards the past, present, and the future. Time attitudes are particularly important in adolescence due to their association with various educational and psychological outcomes. The AATI-TA is a robust instrument and AATI-TA scores have already been validated in several national contexts worldwide. Due to language differences between Slovene and English, a 24-item version of the AATI-TA was examined in Slovenia. As hypothesized, scores on the 24-item Slovenian version of AATI-TA were internally consistent and structurally valid. Moreover, meaningful correlations between time attitudes and positivity, a basic disposition determining individual well-being, provided evidence of concurrent validity. The results suggest that the Slovenian version of the AATI-TA will be useful in Slovenian research examining time attitudes.

  18. Modeling and Validating Time, Buffering, and Utilization of a Large-Scale, Real-Time Data Acquisition System

    CERN Document Server

    AUTHOR|(SzGeCERN)756497; The ATLAS collaboration; Garcia Garcia, Pedro Javier; Vandelli, Wainer; Froening, Holger

    2017-01-01

    Data acquisition systems for large-scale high-energy physics experiments have to handle hundreds of gigabytes per second of data, and are typically implemented as specialized data centers that connect a very large number of front-end electronics devices to an event detection and storage system. The design of such systems is often based on many assumptions, small-scale experiments and a substantial amount of over-provisioning. In this paper, we introduce a discrete event-based simulation tool that models the dataflow of the current ATLAS data acquisition system, with the main goal to be accurate with regard to the main operational characteristics. We measure buffer occupancy counting the number of elements in buffers; resource utilization measuring output bandwidth and counting the number of active processing units, and their time evolution by comparing data over many consecutive and small periods of time. We perform studies on the error in simulation when comparing the results to a large amount of real-world ...

  19. Modeling and Validating Time, Buffering, and Utilization of a Large-Scale, Real-Time Data Acquisition System

    CERN Document Server

    AUTHOR|(SzGeCERN)756497; The ATLAS collaboration; Garcia Garcia, Pedro Javier; Vandelli, Wainer; Froening, Holger

    2017-01-01

    Data acquisition systems for large-scale high-energy physics experiments have to handle hundreds of gigabytes per second of data, and are typically realized as specialized data centers that connect a very large number of front-end electronics devices to an event detection and storage system. The design of such systems is often based on many assumptions, small-scale experiments and a substantial amount of over-provisioning. In this work, we introduce a discrete event-based simulation tool that models the data flow of the current ATLAS data acquisition system, with the main goal to be accurate with regard to the main operational characteristics. We measure buffer occupancy counting the number of elements in buffers, resource utilization measuring output bandwidth and counting the number of active processing units, and their time evolution by comparing data over many consecutive and small periods of time. We perform studies on the error of simulation when comparing the results to a large amount of real-world ope...

  20. Time delay effects on large-scale MR damper based semi-active control strategies

    International Nuclear Information System (INIS)

    Cha, Y-J; Agrawal, A K; Dyke, S J

    2013-01-01

    This paper presents a detailed investigation on the robustness of large-scale 200 kN MR damper based semi-active control strategies in the presence of time delays in the control system. Although the effects of time delay on stability and performance degradation of an actively controlled system have been investigated extensively by many researchers, degradation in the performance of semi-active systems due to time delay has yet to be investigated. Since semi-active systems are inherently stable, instability problems due to time delay are unlikely to arise. This paper investigates the effects of time delay on the performance of a building with a large-scale MR damper, using numerical simulations of near- and far-field earthquakes. The MR damper is considered to be controlled by four different semi-active control algorithms, namely (i) clipped-optimal control (COC), (ii) decentralized output feedback polynomial control (DOFPC), (iii) Lyapunov control, and (iv) simple-passive control (SPC). It is observed that all controllers except for the COC are significantly robust with respect to time delay. On the other hand, the clipped-optimal controller should be integrated with a compensator to improve the performance in the presence of time delay. (paper)

  1. Comparison Study of Braden Scale and Time-to-Erythema Measures in Long-term Care.

    Science.gov (United States)

    Yap, Tracey L; Rapp, Mary Pat; Kennerly, Susan; Cron, Stanley G; Bergstrom, Nancy

    2015-01-01

    The Braden Scale for Predicting Pressure Sore Risk is used to assess risk, and the Centers for Medicare & Medicaid guidelines suggest the use of a tissue tolerance procedure that detects time-to-erythema (TTE) to further refine tissue tolerance, a component of the Braden Scale. The aim of this study was to compare the Braden Scale and TTE as risk classification methods and their utility in identifying care planning interventions. Descriptive study using retrospective chart review. Participants were a convenience sample of 89 adults 65 years or older residing in a long-term care facility in the Midwestern United States. The sample was drawn from a facility-generated list of 90 residents who had both Braden Scale and tissue tolerance testing performed within 24 hours of admission from any setting, readmission after a hospital stay, or performed as part of a routine annual reassessment. Results of staff performance on the Braden Scale and TTE were compared as risk classification methods and based on their utility for identifying care planning interventions. Data were collected during 1 session when TTE and the Braden Scale were completed. Agreement between the 5 risk categories from the Braden Scale and 5 TTE risk categories was analyzed via the kappa statistic and Kendall tau-c statistic. Spearman or Pearson correlation coefficients were calculated as appropriate for ordinal and continuous risk, intervention, and severity measures. The mean Braden Scale score was 17.5 ± 3 (mean ± SD); the mean TTE-Bed was 2.35 ± 0.57 hours and the mean TTE-Chair was 2.18 ± 0.52. Using a Braden Scale score of 18 or less as a cut point for identifying clinically relevant risk for pressure ulcer development, 55 participants were deemed at risk, 62 had mobility subscale scores less than 4, 76 had activity subscale scores less than 4, and 73 were incontinent. The weighted kappa statistic demonstrated weak agreement between TTE-Bed and the Braden Scale Total Score (κ = 0.04; 95% CI: 0

  2. A time-scale sensitometric method for evaluating screen - film systems

    International Nuclear Information System (INIS)

    Goes, E.G.; Pela, C.A.; Ghilardi, N.T.

    1997-01-01

    An x-ray sensitometer is used to measure the characteristic curve of radiographic films exposed with fluorescent intensifying screens. The series of relative exposures, necessary to cover the full density range of the film, can be obtained by either time-scale or intensity-scale sensitometric methods. We have developed a convenient method of exposing film-screen systems for time-scale sensitometry. In this method, during exposure the x-ray kilovoltage, tube current and x-ray intensity remain constant and a geometric series of exposures of the film is modulated by varying the exposure time. This time variation can be obtained when a lead disc with different sector openings is rotated in front of the film system by a stepping motor. The conditions normally used are 70 kVp x-rays, 3.5 mm Al total filtration at the tube, and 2.4 m focal spot-film distance. This exposure latitude gives a complete characteristic curve of film-screen systems. (author)

  3. A time-scale sensitometric method for evaluating screen - film systems

    Energy Technology Data Exchange (ETDEWEB)

    Goes, E.G.; Pela, C.A.; Ghilardi, N.T. [CIDRA - Centro de Instrumentacao, Dosimetria e Radioprotecao, DFM - FFCLRP - USP, Av. Bandeirantes, 3900-14040 901 Ribeirao Preto, SP (Brazil)

    1997-10-01

    An x-ray sensitometer is used to measure the characteristic curve of radiographic films exposed with fluorescent intensifying screens. The series of relative exposures, necessary to cover the full density range of the film, can be obtained by either time-scale or intensity-scale sensitometric methods. We have developed a convenient method of exposing film-screen systems for time-scale sensitometry. In this method, during exposure the x-ray kilovoltage, tube current and x-ray intensity remain constant and a geometric series of exposures of the film is modulated by varying the exposure time. This time variation can be obtained when a lead disc with different sector openings is rotated in front of the film system by a stepping motor. The conditions normally used are 70 kVp x-rays, 3.5 mm Al total filtration at the tube, and 2.4 m focal spot-film distance. This exposure latitude gives a complete characteristic curve of film-screen systems. (author)

  4. Development of automatic intercomparison system for generation of time scale ensembling several atomic clocks

    Directory of Open Access Journals (Sweden)

    Thorat P.P.

    2015-01-01

    Full Text Available National physical laboratory India (NPLI has five commercial cesium atomic clocks. Till recently one of these clocks had been used to maintain coordinated universal time (UTC of NPLI. To utilize all these clocks in an ensemble manner to generate a smoother time scale, it has been essential to inter-compare them very precisely. This has been achieved with an automatic measurement system with well-conceived software. Though few laboratories have developed such automatic measurement system by themselves based on the respective requirements; but they are not reported. So keeping in mind of the specific requirement of the time scale generation, a new system has been developed by NPLI. The design has taken into account of the associated infrastructure that exists and would be used. The performance of the new system has also been studied. It has been found to be quite satisfactory to serve the purpose. The system is being utilized for the generation of time scale of NPLI.

  5. Correcting Spatial Variance of RCM for GEO SAR Imaging Based on Time-Frequency Scaling

    Directory of Open Access Journals (Sweden)

    Ze Yu

    2016-07-01

    Full Text Available Compared with low-Earth orbit synthetic aperture radar (SAR, a geosynchronous (GEO SAR can have a shorter revisit period and vaster coverage. However, relative motion between this SAR and targets is more complicated, which makes range cell migration (RCM spatially variant along both range and azimuth. As a result, efficient and precise imaging becomes difficult. This paper analyzes and models spatial variance for GEO SAR in the time and frequency domains. A novel algorithm for GEO SAR imaging with a resolution of 2 m in both the ground cross-range and range directions is proposed, which is composed of five steps. The first is to eliminate linear azimuth variance through the first azimuth time scaling. The second is to achieve RCM correction and range compression. The third is to correct residual azimuth variance by the second azimuth time-frequency scaling. The fourth and final steps are to accomplish azimuth focusing and correct geometric distortion. The most important innovation of this algorithm is implementation of the time-frequency scaling to correct high-order azimuth variance. As demonstrated by simulation results, this algorithm can accomplish GEO SAR imaging with good and uniform imaging quality over the entire swath.

  6. Modeling Climate Responses to Spectral Solar Forcing on Centennial and Decadal Time Scales

    Science.gov (United States)

    Wen, G.; Cahalan, R.; Rind, D.; Jonas, J.; Pilewskie, P.; Harder, J.

    2012-01-01

    We report a series of experiments to explore clima responses to two types of solar spectral forcing on decadal and centennial time scales - one based on prior reconstructions, and another implied by recent observations from the SORCE (Solar Radiation and Climate Experiment) SIM (Spectral 1rradiance Monitor). We apply these forcings to the Goddard Institute for Space Studies (GISS) Global/Middle Atmosphere Model (GCMAM). that couples atmosphere with ocean, and has a model top near the mesopause, allowing us to examine the full response to the two solar forcing scenarios. We show different climate responses to the two solar forCing scenarios on decadal time scales and also trends on centennial time scales. Differences between solar maximum and solar minimum conditions are highlighted, including impacts of the time lagged reSponse of the lower atmosphere and ocean. This contrasts with studies that assume separate equilibrium conditions at solar maximum and minimum. We discuss model feedback mechanisms involved in the solar forced climate variations.

  7. Modeling and simulation of nuclear fuel in scenarios with long time scales

    Energy Technology Data Exchange (ETDEWEB)

    Espinosa, Carlos E.; Bodmann, Bardo E.J., E-mail: eduardo.espinosa@ufrgs.br, E-mail: bardo.bodmann@ufrgs.br [Universidade Federal do Rio Grande do Sul (DENUC/PROMEC/UFRGS), Porto Alegre, RS (Brazil). Departamento de Engenharia Nuclear. Programa de Pos Graduacao em Engenharia Mecanica

    2015-07-01

    Nuclear reactors play a key role in defining the energy matrix. A study by the Fraunhofer Society shows in different time scales for long periods of time the distribution of energy sources. Regardless of scale, the use of nuclear energy is practically constant. In these scenarios, the nuclear fuel behavior over time is of interest. For kinetics of long-term scales, changing the chemical composition of fuel is significant. Thus, it is appropriate to consider fission products called neutron poisons. Such products are of interest in the nuclear reactor, since they become parasitic neutron absorbers and result in long thermal heat sources. The objective of this work is to solve the kinetics system coupled to neutron poison products. To solve this system, we use similar ideas to the method of Adomian decomposition. Initially, one separates the system of equations as the sum of a linear part and a non-linear part in order to solve a recursive system. The nonlinearity is treated as Adomian polynomial. We present numerical results of the effects of changing the power of a reactor, scenarios such as start-up and shut-down. For these results we consider time dependent reactivity, such as linear reactivity, quadratic polynomial and oscillatory. With these results one can simulate the chemical composition of the fuel due to the reuse of the spent fuel in subsequent cycles. (author)

  8. Time-Sliced Perturbation Theory for Large Scale Structure I: General Formalism

    CERN Document Server

    Blas, Diego; Ivanov, Mikhail M.; Sibiryakov, Sergey

    2016-01-01

    We present a new analytic approach to describe large scale structure formation in the mildly non-linear regime. The central object of the method is the time-dependent probability distribution function generating correlators of the cosmological observables at a given moment of time. Expanding the distribution function around the Gaussian weight we formulate a perturbative technique to calculate non-linear corrections to cosmological correlators, similar to the diagrammatic expansion in a three-dimensional Euclidean quantum field theory, with time playing the role of an external parameter. For the physically relevant case of cold dark matter in an Einstein--de Sitter universe, the time evolution of the distribution function can be found exactly and is encapsulated by a time-dependent coupling constant controlling the perturbative expansion. We show that all building blocks of the expansion are free from spurious infrared enhanced contributions that plague the standard cosmological perturbation theory. This pave...

  9. REAL-TIME VIDEO SCALING BASED ON CONVOLUTION NEURAL NETWORK ARCHITECTURE

    Directory of Open Access Journals (Sweden)

    S Safinaz

    2017-08-01

    Full Text Available In recent years, video super resolution techniques becomes mandatory requirements to get high resolution videos. Many super resolution techniques researched but still video super resolution or scaling is a vital challenge. In this paper, we have presented a real-time video scaling based on convolution neural network architecture to eliminate the blurriness in the images and video frames and to provide better reconstruction quality while scaling of large datasets from lower resolution frames to high resolution frames. We compare our outcomes with multiple exiting algorithms. Our extensive results of proposed technique RemCNN (Reconstruction error minimization Convolution Neural Network shows that our model outperforms the existing technologies such as bicubic, bilinear, MCResNet and provide better reconstructed motioning images and video frames. The experimental results shows that our average PSNR result is 47.80474 considering upscale-2, 41.70209 for upscale-3 and 36.24503 for upscale-4 for Myanmar dataset which is very high in contrast to other existing techniques. This results proves our proposed model real-time video scaling based on convolution neural network architecture’s high efficiency and better performance.

  10. Towards a High-resolution Time Scale for the Early Devonian

    Science.gov (United States)

    Dekkers, M. J.; da Silva, A. C.

    2017-12-01

    High-resolution time scales are crucial to understand Earth's history in detail. The construction of a robust geological time scale, however, inevitably becomes increasingly harder further back in time. Uncertainties associated with anchor radiometric ages increase in size, not speaking of the mere presence of suitable datable strata. However, durations of stages can be tightly constrained by making use of cyclic expressions in sediments, an approach that revolutionized the Cenozoic time scale. When precisely determined durations are stitched together, ultimately, a very precise time scale is the result. For the Mesozoic and Paleozoic an astronomical solution as a tuning target is not available but the dominant periods of eccentricity, obliquity and precession are reasonably well constrained for the entire Phanerozoic which enables their detection by means of spectral analysis. Eccentricity is time-invariant and is used as the prime building block. Here we focus on the Early Devonian, on its lowermost three stages: the Lochkovian, Pragian and Emsian. The uncertainties on the Devonian stage boundaries are currently in the order of several millions of years. The preservation of climatic cycles in diagenetically or even anchimetamorphically affected successions, however, is essential. The fit of spectral peak ratios with those calculated for orbital cycles, is classically used as a strong argument for a preserved climatic signal. Here we use primarily the low field magnetic susceptibility (MS) as proxy parameter, supported by gamma-ray spectrometry to test for consistency. Continuous Wavelet Transform, Evolutive Harmonic Analysis, Multitaper Method, and Average Spectral Misfit are used to reach an optimal astronomical interpretation. We report on classic Early Devonian sections from the Czech Republic: the Pozar-CS (Lochkovian and Pragian), Pod Barrandovem (Pragian and Lower Emsian), and Zlichov (Middle-Upper Emsian). Also a Middle-Upper Emsian section from the US

  11. Consistent allometric scaling of stomatal sizes and densities across taxonomic ranks and geologic time

    Science.gov (United States)

    de Boer, H. J.; Price, C. A.; Wagner-Cremer, F.; Dekker, S. C.; Veneklaas, E. J.

    2013-12-01

    Stomatal pores on plants leaves are an important link in the chain of processes that determine biosphere fluxes of water and carbon. Stomatal density (i.e. the number of stomata per area) and the size of the stomatal pore at maximum aperture are particularly relevant traits in this context because they determine the theoretical maximum diffusive stomatal conductance (gsmax) and thereby set an upper limit for leaf gas exchange. Observations on (sub)fossil leaves revealed that changes in stomatal densities are anti-correlated with changes in stomatal sizes at developmental and evolutionary timescales. Moreover, this anti-correlation appears consistently within single species, across multiple species in the extant plant community and at evolutionary time scales. The consistency of the relation between stomatal densities and sizes suggests that common mechanisms constrain the adaptation of these traits across the plant community. In an attempt to identify such potential generic constraints, we investigated the allometry between stomatal densities and sizes in the extant plant community and across geological time. As the size of the stomatal pore at maximum aperture is typically derived from the length of the stomatal pore, we considered the allometric scaling of pore length (lp) with stomatal density (Ds) as the power law: lp = k . Dsa in which k is a normalization constant and the exponent a is the slope of the scaling relation. Our null-hypothesis predicts that stomatal density and pore length scale along a constant slope of -1/2 based on a scale-invariant relation between pore length and the distance between neighboring pores. Our alternative hypothesis predicts a constant slope of -1 based on the idea that stomatal density and pore length scale along an invariant gsmax. To explore these scaling hypotheses in the extant plant community we compiled a dataset of combined observations of stomatal density and pore length on 111 species from published literature and new

  12. Multiple-Time-Scales Hierarchical Frequency Stability Control Strategy of Medium-Voltage Isolated Microgrid

    DEFF Research Database (Denmark)

    Zhao, Zhuoli; Yang, Ping; Guerrero, Josep M.

    2016-01-01

    In this paper, an islanded medium-voltage (MV) microgrid placed in Dongao Island is presented, which integrates renewable-energy-based distributed generations (DGs), energy storage system (ESS), and local loads. In an isolated microgrid without connection to the main grid to support the frequency....... In this way, dynamic stability control that cope with disturbances in short-time scale is implemented by microgrid central controller (MGCC) within Zone B and Zone C. Meanwhile, steady-state stability control to solve the peaks and valleys problem of loads and DGs in long-time scale is executed by microgrid...... energy management system (MEMS) within Zone A. Furthermore, based on the developed complete small-signal state-space model, sensitivity analysis of the eigenvalues is conducted in order to reveal the dynamic stability margin of the MV microgrid, and to identify the proper range of the control parameters...

  13. Chaos anticontrol and synchronization of three time scales brushless DC motor system

    International Nuclear Information System (INIS)

    Ge Zhengming; Cheng Juiwen; Chen Yensheng

    2004-01-01

    Chaos anticontrol of three time scale brushless dc motors and chaos synchronization of different order systems are studied. Nondimensional dynamic equations of three time scale brushless DC motor system are presented. Using numerical results, such as phase diagram, bifurcation diagram, and Lyapunov exponent, periodic and chaotic motions can be observed. By adding constant term, periodic square wave, the periodic triangle wave, the periodic sawtooth wave, and kx vertical bar x vertical bar term, to achieve anticontrol of chaotic or periodic systems, it is found that more chaotic phenomena of the system can be observed. Then, by coupled terms and linearization of error dynamics, we obtain the partial synchronization of two different order systems, i.e. brushless DC motor system and rate gyroscope system

  14. Past and future changes in streamflow in the U.S. Midwest: Bridging across time scales

    Science.gov (United States)

    Villarini, G.; Slater, L. J.; Salvi, K. A.

    2017-12-01

    Streamflows have increased notably across the U.S. Midwest over the past century, principally due to changes in precipitation and land use / land cover. Improving our understanding of the physical drivers that are responsible for the observed changes in discharge may enhance our capability of predicting and projecting these changes, and may have large implications for water resources management over this area. This study will highlight our efforts towards the statistical attribution of changes in discharge across the U.S. Midwest, with analyses performed at the seasonal scale from low to high flows. The main drivers of changing streamflows that we focus on are: urbanization, agricultural land cover, basin-averaged temperature, basin-averaged precipitation, and antecedent soil moisture. Building on the insights from this attribution, we will examine the potential predictability of streamflow across different time scales, with lead times ranging from seasonal to decadal, and discuss a potential path forward for engineering design for future conditions.

  15. Virtual water trade and time scales for loss of water sustainability: a comparative regional analysis.

    Science.gov (United States)

    Goswami, Prashant; Nishad, Shiv Narayan

    2015-03-20

    Assessment and policy design for sustainability in primary resources like arable land and water need to adopt long-term perspective; even small but persistent effects like net export of water may influence sustainability through irreversible losses. With growing consumption, this virtual water trade has become an important element in the water sustainability of a nation. We estimate and contrast the virtual (embedded) water trades of two populous nations, India and China, to present certain quantitative measures and time scales. Estimates show that export of embedded water alone can lead to loss of water sustainability. With the current rate of net export of water (embedded) in the end products, India is poised to lose its entire available water in less than 1000 years; much shorter time scales are implied in terms of water for production. The two cases contrast and exemplify sustainable and non-sustainable virtual water trade in long term perspective.

  16. Virtual water trade and time scales for loss of water sustainability: A comparative regional analysis

    Science.gov (United States)

    Goswami, Prashant; Nishad, Shiv Narayan

    2015-03-01

    Assessment and policy design for sustainability in primary resources like arable land and water need to adopt long-term perspective; even small but persistent effects like net export of water may influence sustainability through irreversible losses. With growing consumption, this virtual water trade has become an important element in the water sustainability of a nation. We estimate and contrast the virtual (embedded) water trades of two populous nations, India and China, to present certain quantitative measures and time scales. Estimates show that export of embedded water alone can lead to loss of water sustainability. With the current rate of net export of water (embedded) in the end products, India is poised to lose its entire available water in less than 1000 years; much shorter time scales are implied in terms of water for production. The two cases contrast and exemplify sustainable and non-sustainable virtual water trade in long term perspective.

  17. A multi scale approximation solution for the time dependent Boltzmann-transport equation

    International Nuclear Information System (INIS)

    Merk, B.

    2004-03-01

    The basis of all transient simulations for nuclear reactor cores is the reliable calculation of the power production. The local power distribution is generally calculated by solving the space, time, energy and angle dependent neutron transport equation known as Boltzmann equation. The computation of exact solutions of the Boltzmann equation is very time consuming. For practical numerical simulations approximated solutions are usually unavoidable. The objective of this work is development of an effective multi scale approximation solution for the Boltzmann equation. Most of the existing methods are based on separation of space and time. The new suggested method is performed without space-time separation. This effective approximation solution is developed on the basis of an expansion for the time derivative of different approximations to the Boltzmann equation. The method of multiple scale expansion is used for the expansion of the time derivative, because the problem of the stiff time behaviour can't be expressed by standard expansion methods. This multiple scale expansion is used in this work to develop approximation solutions for different approximations of the Boltzmann equation, starting from the expansion of the point kinetics equations. The resulting analytic functions are used for testing the applicability and accuracy of the multiple scale expansion method for an approximation solution with 2 delayed neutron groups. The results are tested versus the exact analytical results for the point kinetics equations. Very good agreement between both solutions is obtained. The validity of the solution with 2 delayed neutron groups to approximate the behaviour of the system with 6 delayed neutron groups is demonstrated in an additional analysis. A strategy for a solution with 4 delayed neutron groups is described. A multiple scale expansion is performed for the space-time dependent diffusion equation for one homogenized cell with 2 delayed neutron groups. The result is

  18. Disconjugacy, transformations and quadratic functionals for symplectic dynamicsystems on time scales

    Czech Academy of Sciences Publication Activity Database

    Došlý, Ondřej; Hilscher, R.

    2001-01-01

    Roč. 7, č. 2 (2001), s. 265-295 ISSN 1023-6198 R&D Projects: GA ČR GA201/98/0677; GA ČR GA201/99/0295 Keywords : symplectic dynamic system%time scale% quadratic functional Subject RIV: BA - General Mathematics Impact factor: 0.325, year: 2001 http://www.tandfonline.com/doi/abs/10.1080/10236190108808273

  19. On submersivity assumption for nonlinear control systems on homogeneous time scales

    Czech Academy of Sciences Publication Activity Database

    Kotta, U.; Rehák, Branislav; Wyrwas, M.

    2011-01-01

    Roč. 60, č. 1 (2011), s. 25-37 ISSN 1736-6046 Grant - others:ISPS(XE) PE 10022 Institutional research plan: CEZ:AV0Z10750506 Keywords : time scale * nonlinear system * submersion * submersive system. Subject RIV: BC - Control Systems Theory Impact factor: 0.488, year: 2011 http://library.utia.cas.cz/separaty/2011/TR/rehak-0366024.pdf

  20. Nonlinearities in Drug Release Process from Polymeric Microparticles: Long-Time-Scale Behaviour

    Directory of Open Access Journals (Sweden)

    Elena Simona Bacaita

    2012-01-01

    Full Text Available A theoretical model of the drug release process from polymeric microparticles (a particular type of polymer matrix, through dispersive fractal approximation of motion, is built. As a result, the drug release process takes place through cnoidal oscillations modes of a normalized concentration field. This indicates that, in the case of long-time-scale evolutions, the drug particles assemble in a lattice of nonlinear oscillators occur macroscopically, through variations of drug concentration. The model is validated by experimental results.

  1. A typology of time-scale mismatches and behavioral interventions to diagnose and solve conservation problems

    Science.gov (United States)

    Wilson, Robyn S.; Hardisty, David J.; Epanchin-Niell, Rebecca S.; Runge, Michael C.; Cottingham, Kathryn L.; Urban, Dean L.; Maguire, Lynn A.; Hastings, Alan; Mumby, Peter J.; Peters, Debra P.C.

    2016-01-01

    Ecological systems often operate on time scales significantly longer or shorter than the time scales typical of human decision making, which causes substantial difficulty for conservation and management in socioecological systems. For example, invasive species may move faster than humans can diagnose problems and initiate solutions, and climate systems may exhibit long-term inertia and short-term fluctuations that obscure learning about the efficacy of management efforts in many ecological systems. We adopted a management-decision framework that distinguishes decision makers within public institutions from individual actors within the social system, calls attention to the ways socioecological systems respond to decision makers’ actions, and notes institutional learning that accrues from observing these responses. We used this framework, along with insights from bedeviling conservation problems, to create a typology that identifies problematic time-scale mismatches occurring between individual decision makers in public institutions and between individual actors in the social or ecological system. We also considered solutions that involve modifying human perception and behavior at the individual level as a means of resolving these problematic mismatches. The potential solutions are derived from the behavioral economics and psychology literature on temporal challenges in decision making, such as the human tendency to discount future outcomes at irrationally high rates. These solutions range from framing environmental decisions to enhance the salience of long-term consequences, to using structured decision processes that make time scales of actions and consequences more explicit, to structural solutions aimed at altering the consequences of short-sighted behavior to make it less appealing. Additional application of these tools and long-term evaluation measures that assess not just behavioral changes but also associated changes in ecological systems are needed.

  2. Chaos synchronization and parameter identification of three time scales brushless DC motor system

    International Nuclear Information System (INIS)

    Ge, Z.-M.; Cheng, J.-W.

    2005-01-01

    Chaotic anticontrol and chaos synchronization of brushless DC motor system are studied in this paper. Nondimensional dynamic equations of three time scale brushless DC motor system are presented. Using numerical results, such as phase diagram, bifurcation diagram, and Lyapunov exponent, periodic and chaotic motions can be observed. Then, chaos synchronization of two identical systems via additional inputs and Lyapunov stability theory are studied. And further, the parameter of the system is traced via adaptive control and random optimization method

  3. Scaling of black silicon processing time by high repetition rate femtosecond lasers

    Directory of Open Access Journals (Sweden)

    Nava Giorgio

    2013-11-01

    Full Text Available Surface texturing of silicon substrates is performed by femtosecond laser irradiation at high repetition rates. Various fabrication parameters are optimized in order to achieve very high absorptance in the visible region from the micro-structured silicon wafer as compared to the unstructured one. A 70-fold reduction of the processing time is demonstrated by increasing the laser repetition rate from 1 kHz to 200 kHz. Further scaling up to 1 MHz can be foreseen.

  4. [PHAHs levels in soil samples from the E-waste disassembly sites and their sources allocation].

    Science.gov (United States)

    Zhao, Gao-Feng; Wang, Zi-Jian

    2009-06-15

    Soil samples (each with 3 replicates of - 1 kg, at the top 0-5 cm layer) were collected from each of the e-waste disassembly sites and the control site. Also obtained from each disassembly site were samples (each weighing - 0.2 kg) of cable coating,stuffing powder, and circuit boards chipping. The contents of 23 PBB congeners, 12 PBDE congeners, and 27 PCB congeners in soil and in their potential sources, including e-waste residues, were measured using the GC-MS5975B technique. The highest level of PBBs was found in the cable coating among the three e-waste residues, with a concentration of 35.25 ng x g(-1). The contents of low-brominated PBBs (including monobromobiphenyls and dibromobiphenyls) accounted for 38% of the total PBBs concentration observed in cable coating sample. The highest levels of PBDEs and PBDE209 were found in the stuffing powder for electronic component among the collected e-waste residues, with a concentration of 29.71 and 4.19 x 10(3) ng x g(-1). PBDE153 and PBDE183 were the most predominant PBDE congeners, with their concentration accounting for 43% and 24% of the total PBDEs concentration observed in the stuffing powder sample, respectively. Levels of PCBs in cable coating were the highest in these e-waste residues, with a concentration of 680.02 ngx g(-1). The observed values of the three PHAHs in soils from the disassembly site were considerably higher than their corresponding values observed in the control site (p < 0.05), which indicates that these PHAHs from e-waste is the pollution source of local environment.

  5. Interactive domains in the molecular chaperone human alphaB crystallin modulate microtubule assembly and disassembly.

    Directory of Open Access Journals (Sweden)

    Joy G Ghosh

    2007-06-01

    Full Text Available Small heat shock proteins regulate microtubule assembly during cell proliferation and in response to stress through interactions that are poorly understood.Novel functions for five interactive sequences in the small heat shock protein and molecular chaperone, human alphaB crystallin, were investigated in the assembly/disassembly of microtubules and aggregation of tubulin using synthetic peptides and mutants of human alphaB crystallin.The interactive sequence (113FISREFHR(120 exposed on the surface of alphaB crystallin decreased microtubule assembly by approximately 45%. In contrast, the interactive sequences, (131LTITSSLSSDGV(142 and (156ERTIPITRE(164, corresponding to the beta8 strand and the C-terminal extension respectively, which are involved in complex formation, increased microtubule assembly by approximately 34-45%. The alphaB crystallin peptides, (113FISREFHR(120 and (156ERTIPITRE(164, inhibited microtubule disassembly by approximately 26-36%, and the peptides (113FISREFHR(120 and (131LTITSSLSSDGV(142 decreased the thermal aggregation of tubulin by approximately 42-44%. The (131LTITSSLSSDGV(142 and (156ERTIPITRE(164 peptides were more effective than the widely used anti-cancer drug, Paclitaxel, in modulating tubulinmicrotubule dynamics. Mutagenesis of these interactive sequences in wt human alphaB crystallin confirmed the effects of the alphaB crystallin peptides on microtubule assembly/disassembly and tubulin aggregation. The regulation of microtubule assembly by alphaB crystallin varied over a narrow range of concentrations. The assembly of microtubules was maximal at alphaB crystallin to tubulin molar ratios between 1:4 and 2:1, while molar ratios >2:1 inhibited microtubule assembly.Interactive sequences on the surface of human alphaB crystallin collectively modulate microtubule assembly through a dynamic subunit exchange mechanism that depends on the concentration and ratio of alphaB crystallin to tubulin. These are the first

  6. Timing of Formal Phase Safety Reviews for Large-Scale Integrated Hazard Analysis

    Science.gov (United States)

    Massie, Michael J.; Morris, A. Terry

    2010-01-01

    Integrated hazard analysis (IHA) is a process used to identify and control unacceptable risk. As such, it does not occur in a vacuum. IHA approaches must be tailored to fit the system being analyzed. Physical, resource, organizational and temporal constraints on large-scale integrated systems impose additional direct or derived requirements on the IHA. The timing and interaction between engineering and safety organizations can provide either benefits or hindrances to the overall end product. The traditional approach for formal phase safety review timing and content, which generally works well for small- to moderate-scale systems, does not work well for very large-scale integrated systems. This paper proposes a modified approach to timing and content of formal phase safety reviews for IHA. Details of the tailoring process for IHA will describe how to avoid temporary disconnects in major milestone reviews and how to maintain a cohesive end-to-end integration story particularly for systems where the integrator inherently has little to no insight into lower level systems. The proposal has the advantage of allowing the hazard analysis development process to occur as technical data normally matures.

  7. Incipient multiple fault diagnosis in real time with applications to large-scale systems

    International Nuclear Information System (INIS)

    Chung, H.Y.; Bien, Z.; Park, J.H.; Seon, P.H.

    1994-01-01

    By using a modified signed directed graph (SDG) together with the distributed artificial neutral networks and a knowledge-based system, a method of incipient multi-fault diagnosis is presented for large-scale physical systems with complex pipes and instrumentations such as valves, actuators, sensors, and controllers. The proposed method is designed so as to (1) make a real-time incipient fault diagnosis possible for large-scale systems, (2) perform the fault diagnosis not only in the steady-state case but also in the transient case as well by using a concept of fault propagation time, which is newly adopted in the SDG model, (3) provide with highly reliable diagnosis results and explanation capability of faults diagnosed as in an expert system, and (4) diagnose the pipe damage such as leaking, break, or throttling. This method is applied for diagnosis of a pressurizer in the Kori Nuclear Power Plant (NPP) unit 2 in Korea under a transient condition, and its result is reported to show satisfactory performance of the method for the incipient multi-fault diagnosis of such a large-scale system in a real-time manner

  8. A Real-Time Analysis Method for Pulse Rate Variability Based on Improved Basic Scale Entropy

    Directory of Open Access Journals (Sweden)

    Yongxin Chou

    2017-01-01

    Full Text Available Base scale entropy analysis (BSEA is a nonlinear method to analyze heart rate variability (HRV signal. However, the time consumption of BSEA is too long, and it is unknown whether the BSEA is suitable for analyzing pulse rate variability (PRV signal. Therefore, we proposed a method named sliding window iterative base scale entropy analysis (SWIBSEA by combining BSEA and sliding window iterative theory. The blood pressure signals of healthy young and old subjects are chosen from the authoritative international database MIT/PhysioNet/Fantasia to generate PRV signals as the experimental data. Then, the BSEA and the SWIBSEA are used to analyze the experimental data; the results show that the SWIBSEA reduces the time consumption and the buffer cache space while it gets the same entropy as BSEA. Meanwhile, the changes of base scale entropy (BSE for healthy young and old subjects are the same as that of HRV signal. Therefore, the SWIBSEA can be used for deriving some information from long-term and short-term PRV signals in real time, which has the potential for dynamic PRV signal analysis in some portable and wearable medical devices.

  9. Effects of moonlight on the capturability of frugivorous phyllostomid bats (Chiroptera: Phyllostomidae at different time scales

    Directory of Open Access Journals (Sweden)

    Marco A. R. Mello

    2013-08-01

    Full Text Available Some bat species seem to be lunar phobic, i.e., they avoid flying in bright areas or during bright periods of the night; however, the evidence is still controversial. We think that part of this controversy comes from pooling data on bat captures and moonlight intensity according to broad categories, such as moon phases, which conceal the high variability among nights. Therefore, we used detailed, long-term field data on three phyllostomid bat species, in order to test the hypothesis of lunar phobia at two different time scales: 1 among nights, by pooling data of different nights according to moon phases and testing for differences in the distribution of captures; and 2 within a night, by analyzing the relationship between capturability and moonlight intensity (measured as illuminance in one-hour intervals for 29 individual nights. Although most captures of the studied bat species occurred in the first half of the night, their activity pattern varied largely among nights, and was not always unimodal as commonly assumed. At the larger time scale, all studied bat species showed evidence of lunar phobia, as they were more frequently captured on dark moon phases. Nevertheless, at the smaller time scale, only Carollia perspicillata (Linnaeus, 1758 was less frequently captured on brighter periods of the night. We propose that the unimodal activity pattern assumed for frugivorous phyllostomid bats may be an artifact of data organization, and that activity and lunar phobia are much more variable than previously assumed.

  10. Relative Time-scale for Channeling Events Within Chaotic Terrains, Margaritifer Sinus, Mars

    Science.gov (United States)

    Janke, D.

    1985-01-01

    A relative time scale for ordering channel and chaos forming events was constructed for areas within the Margaritifer Sinus region of Mars. Transection and superposition relationships of channels, chaotic terrain, and the surfaces surrounding them were used to create the relative time scale; crater density studies were not used. Channels and chaos in contact with one another were treated as systems. These systems were in turn treated both separately (in order to understand internal relationships) and as members of the suite of Martian erosional forms (in order to produce a combined, master time scale). Channeling events associated with chaotic terrain development occurred over an extended geomorphic period. The channels can be divided into three convenient groups: those that pre-date intercrater plains development post-plains, pre-chasma systems; and those associated with the development of the Vallis Marineris chasmata. No correlations with cyclic climatic changes, major geologic events in other regions on Mars, or triggering phenomena (for example, specific impact events) were found.

  11. A Real-Time Analysis Method for Pulse Rate Variability Based on Improved Basic Scale Entropy

    Science.gov (United States)

    Zhang, Ruilei; Feng, Yufeng; Lu, Zhenli

    2017-01-01

    Base scale entropy analysis (BSEA) is a nonlinear method to analyze heart rate variability (HRV) signal. However, the time consumption of BSEA is too long, and it is unknown whether the BSEA is suitable for analyzing pulse rate variability (PRV) signal. Therefore, we proposed a method named sliding window iterative base scale entropy analysis (SWIBSEA) by combining BSEA and sliding window iterative theory. The blood pressure signals of healthy young and old subjects are chosen from the authoritative international database MIT/PhysioNet/Fantasia to generate PRV signals as the experimental data. Then, the BSEA and the SWIBSEA are used to analyze the experimental data; the results show that the SWIBSEA reduces the time consumption and the buffer cache space while it gets the same entropy as BSEA. Meanwhile, the changes of base scale entropy (BSE) for healthy young and old subjects are the same as that of HRV signal. Therefore, the SWIBSEA can be used for deriving some information from long-term and short-term PRV signals in real time, which has the potential for dynamic PRV signal analysis in some portable and wearable medical devices. PMID:29065639

  12. A multi-time-scale analysis of chemical reaction networks: II. Stochastic systems.

    Science.gov (United States)

    Kan, Xingye; Lee, Chang Hyeong; Othmer, Hans G

    2016-11-01

    We consider stochastic descriptions of chemical reaction networks in which there are both fast and slow reactions, and for which the time scales are widely separated. We develop a computational algorithm that produces the generator of the full chemical master equation for arbitrary systems, and show how to obtain a reduced equation that governs the evolution on the slow time scale. This is done by applying a state space decomposition to the full equation that leads to the reduced dynamics in terms of certain projections and the invariant distributions of the fast system. The rates or propensities of the reduced system are shown to be the rates of the slow reactions conditioned on the expectations of fast steps. We also show that the generator of the reduced system is a Markov generator, and we present an efficient stochastic simulation algorithm for the slow time scale dynamics. We illustrate the numerical accuracy of the approximation by simulating several examples. Graph-theoretic techniques are used throughout to describe the structure of the reaction network and the state-space transitions accessible under the dynamics.

  13. Global stability analysis and robust design of multi-time-scale biological networks under parametric uncertainties.

    Science.gov (United States)

    Meyer-Baese, Anke; Koshkouei, Ali J; Emmett, Mark R; Goodall, David P

    2009-01-01

    Biological networks are prone to internal parametric fluctuations and external noises. Robustness represents a crucial property of these networks, which militates the effects of internal fluctuations and external noises. In this paper biological networks are formulated as coupled nonlinear differential systems operating at different time-scales under vanishing perturbations. In contrast to previous work viewing biological parametric uncertain systems as perturbations to a known nominal linear system, the perturbed biological system is modeled as nonlinear perturbations to a known nonlinear idealized system and is represented by two time-scales (subsystems). In addition, conditions for the existence of a global uniform attractor of the perturbed biological system are presented. By using an appropriate Lyapunov function for the coupled system, a maximal upper bound for the fast time-scale associated with the fast state is derived. The proposed robust system design principles are potentially applicable to robust biosynthetic network design. Finally, two examples of two important biological networks, a neural network and a gene regulatory network, are presented to illustrate the applicability of the developed theoretical framework.

  14. A Bayesian method for construction of Markov models to describe dynamics on various time-scales.

    Science.gov (United States)

    Rains, Emily K; Andersen, Hans C

    2010-10-14

    The dynamics of many biological processes of interest, such as the folding of a protein, are slow and complicated enough that a single molecular dynamics simulation trajectory of the entire process is difficult to obtain in any reasonable amount of time. Moreover, one such simulation may not be sufficient to develop an understanding of the mechanism of the process, and multiple simulations may be necessary. One approach to circumvent this computational barrier is the use of Markov state models. These models are useful because they can be constructed using data from a large number of shorter simulations instead of a single long simulation. This paper presents a new Bayesian method for the construction of Markov models from simulation data. A Markov model is specified by (τ,P,T), where τ is the mesoscopic time step, P is a partition of configuration space into mesostates, and T is an N(P)×N(P) transition rate matrix for transitions between the mesostates in one mesoscopic time step, where N(P) is the number of mesostates in P. The method presented here is different from previous Bayesian methods in several ways. (1) The method uses Bayesian analysis to determine the partition as well as the transition probabilities. (2) The method allows the construction of a Markov model for any chosen mesoscopic time-scale τ. (3) It constructs Markov models for which the diagonal elements of T are all equal to or greater than 0.5. Such a model will be called a "consistent mesoscopic Markov model" (CMMM). Such models have important advantages for providing an understanding of the dynamics on a mesoscopic time-scale. The Bayesian method uses simulation data to find a posterior probability distribution for (P,T) for any chosen τ. This distribution can be regarded as the Bayesian probability that the kinetics observed in the atomistic simulation data on the mesoscopic time-scale τ was generated by the CMMM specified by (P,T). An optimization algorithm is used to find the most

  15. Scaling Properties of Field-Induced Superdiffusion in Continuous Time Random Walks

    Science.gov (United States)

    Burioni, R.; Gradenigo, G.; Sarracino, A.; Vezzani, A.; Vulpiani, A.

    2014-10-01

    We consider a broad class of Continuous Time Random Walks (CTRW) with large fluctuations effects in space and time distributions: a random walk with trapping, describing subdiffusion in disordered and glassy materials, and a Lévy walk process, often used to model superdiffusive effects in inhomogeneous materials. We derive the scaling form of the probability distributions and the asymptotic properties of all its moments in the presence of a field by two powerful techniques, based on matching conditions and on the estimate of the contribution of rare events to power-law tails in a field.

  16. Structure assemblable and disassemblable on a racking site for the storage of nuclear reactor fuel elements

    International Nuclear Information System (INIS)

    Helary, L.J.; Grenon, P.

    1987-01-01

    An assemblable and disassemblable nuclear fuel element storage rack structure is described comprising: (a) a juxtapositioning of vertically arranged parallelepipedic racks; (b) a horizontal base plate; (c) at least two meshed networks of horizontal bars; (d) dismantlable fixing means connecting, in each of the networks, the bars of the first series to the bars of the second series, and in the lower network, the bars of each series of bars to the base plate; (c) at least two horizontal strips fixed to two different faces of each rack; and (f) means securing the racks located on the periphery of the rack structure against the bars located at the ends of each series

  17. Nuclear disassembly of the Pb+Au system at Elab=29 MeV per nucleon

    International Nuclear Information System (INIS)

    Piasecki, E.; Bresson, S.; Lott, B.; Bougault, R.; Colin, J.; Crema, E.; Galin, J.; Gatty, B.; Genoux-Lubain, A.; Guerreau, D.; Horn, D.; Jacquet, D.; Jahnke, U.; Jastrzebski, J.; Kordyasz, A.; Le Brun, C.; Lecolley, J.F.; Louvel, M.; Morjean, M.; Paulot, C.; Pienkowski, L.; Pouthas, J.; Quednau, B.; Schroeder, W.U.; Schwinn, E.; Skulski, W.; Toeke, J.; Grand Accelerateur National d'Ions Lourds; Centre de Recherches Nucleaires Strasbourg, BP 20 CRO, 67037 Strasbourg CEDEX, France; Laboratoire de Physique Corpusculaire Caen, boulevard du Marechal Juin, 14032 Caen CEDEX, France; Instituto de Fisica, Universidade de Sao Paulo, Sao Paulo, Brazil; Institut de Physique Nucleaire, BP 1, 91406 Orsay CEDEX, France; Chalk River Laboratories, Atomic Energy of Canada Limited, Chalk River, Ontario, Canda K0J 1J0; Hahn Meitner Institut, D-1000 Berlin 39, Germany; Heavy Ion Laboratory, Warsaw University, ul. Banacha 4, 02-097 Warszawa, Poland; University of Rochester, Rochester, New York 14627)

    1991-01-01

    Nuclei with Z up to 82 emitted in the 208 Pb+ 197 Au reaction at E lab =29 MeV per nucleon have been measured as a function of the associated neutron multiplicity. The data reveal the presence of strong correlations between character of a collision and neutron multiplicity. The trends suggest a disassembly of the nuclear system into a large number of nucleons and small fragments in the events with the highest neutron multiplicity. In such events, approximately one-third of the neturons are released from the system and fragment yields decrease in an exponential fashion with increasing mass

  18. KADIS: a program to analyse the disassembly phase of hypothetical accidents in LMFBRs

    International Nuclear Information System (INIS)

    Schmuck, P.; Jacobs, G.; Arnecke, G.

    1977-11-01

    The program KADIS models the disassembly phase during power excursions in LMFBR hypothetical accidents. KADIS is based on point kinetics in the neutronics part and on a 2-dimensional representation of the reactor core in the hydrodynamics part. The core is modeled as an ideal, compressible fluid which is heated up adiabatically during the excursion. KADIS was built up with the help of the VENUS program of Argonne National Laboratory. Several important features were added to the basic VENUS model. Therefore we give first a complete description of the mathematical models used. Secondly we provide the user with the necessary information to handle the input/output of KADIS. (orig.) [de

  19. Nuclear disassembly of the (Pb+Au) system at Elab=29 MeV per nucleon

    International Nuclear Information System (INIS)

    Piasecki, E.; Kordyasz, A.; Bresson, S.; Crema, E.; Galin, J.; Guerreau, D.; Morjean, M.; Paulot, C.; Pouthas, J.; Jastrzebski, J.; Pienkowski, L.; Skulski, W.; Lott, B.; Quednau, B.; Schroder, W.U.; Toeke, J.

    1990-01-01

    Nuclei, with Z up to 82, emitted in the 208 Pb+ 197 Au reaction at E lab =29 MeV per nucleon, have been measured as a function of the associated neutron multiplicity. The data reveal the presence of strong correlations between character of a collision and neutron multiplicity. The trends suggest a disassembly of the nuclear system into a large number of nucleons and small fragments in the events with the highest neutron multiplicity. In such events, approximately one third of the neutrons are released from the system and fragments yields decrease in an exponential fashion with increasing mass

  20. Fibronectin in tissue regeneration : timely disassembly of the scaffold is necessary to complete the build

    NARCIS (Netherlands)

    Stoffels, Josephine M. J.; Zhao, Chao; Baron, Wia

    2013-01-01

    Tissue injury initiates extracellular matrix molecule expression, including fibronectin production by local cells and fibronectin leakage from plasma. To benefit tissue regeneration, fibronectin promotes opsonization of tissue debris, migration, proliferation, and contraction of cells involved in

  1. Measurement invariance of the perceived stress scale and latent mean differences across gender and time.

    Science.gov (United States)

    Barbosa-Leiker, Celestina; Kostick, Marylynne; Lei, Ming; McPherson, Sterling; Roper, Virginia; Hoekstra, Trynke; Wright, Bruce

    2013-08-01

    Measurement invariance of the 2-factor model of the Perceived Stress Scale--10-item version (Cohen & Williamson, 1988) was tested across men and women at two time points and in the combined total sample over a 2-year time frame (n = 871). Measurement invariance results indicated that the scale measured the latent factors, stress and counter-stress, equivalently in men and women and over time. With measurement invariance demonstrated, differences in latent means were tested. Results indicated that men had lower levels of frequencies of stressors, and at one time point, higher levels of counter-stress, when compared with women. When examining change in frequencies of stressors and counter-stress over 2 years with the combined male and female sample, stressors remained stable, yet counter-stress increased over time. These findings may aid in the interpretation of results when examining stressors and counter-stress in clinical samples where one would expect stress to increase, whereas positive psychological states decrease. Copyright © 2012 John Wiley & Sons, Ltd.

  2. Tracking and visualization of space-time activities for a micro-scale flu transmission study.

    Science.gov (United States)

    Qi, Feng; Du, Fei

    2013-02-07

    Infectious diseases pose increasing threats to public health with increasing population density and more and more sophisticated social networks. While efforts continue in studying the large scale dissemination of contagious diseases, individual-based activity and behaviour study benefits not only disease transmission modelling but also the control, containment, and prevention decision making at the local scale. The potential for using tracking technologies to capture detailed space-time trajectories and model individual behaviour is increasing rapidly, as technological advances enable the manufacture of small, lightweight, highly sensitive, and affordable receivers and the routine use of location-aware devices has become widespread (e.g., smart cellular phones). The use of low-cost tracking devices in medical research has also been proved effective by more and more studies. This study describes the use of tracking devices to collect data of space-time trajectories and the spatiotemporal processing of such data to facilitate micro-scale flu transmission study. We also reports preliminary findings on activity patterns related to chances of influenza infection in a pilot study. Specifically, this study employed A-GPS tracking devices to collect data on a university campus. Spatiotemporal processing was conducted for data cleaning and segmentation. Processed data was validated with traditional activity diaries. The A-GPS data set was then used for visual explorations including density surface visualization and connection analysis to examine space-time activity patterns in relation to chances of influenza infection. When compared to diary data, the segmented tracking data demonstrated to be an effective alternative and showed greater accuracies in time as well as the details of routes taken by participants. A comparison of space-time activity patterns between participants who caught seasonal influenza and those who did not revealed interesting patterns. This study

  3. Tracking and visualization of space-time activities for a micro-scale flu transmission study

    Directory of Open Access Journals (Sweden)

    Qi Feng

    2013-02-01

    Full Text Available Abstract Background Infectious diseases pose increasing threats to public health with increasing population density and more and more sophisticated social networks. While efforts continue in studying the large scale dissemination of contagious diseases, individual-based activity and behaviour study benefits not only disease transmission modelling but also the control, containment, and prevention decision making at the local scale. The potential for using tracking technologies to capture detailed space-time trajectories and model individual behaviour is increasing rapidly, as technological advances enable the manufacture of small, lightweight, highly sensitive, and affordable receivers and the routine use of location-aware devices has become widespread (e.g., smart cellular phones. The use of low-cost tracking devices in medical research has also been proved effective by more and more studies. This study describes the use of tracking devices to collect data of space-time trajectories and the spatiotemporal processing of such data to facilitate micro-scale flu transmission study. We also reports preliminary findings on activity patterns related to chances of influenza infection in a pilot study. Methods Specifically, this study employed A-GPS tracking devices to collect data on a university campus. Spatiotemporal processing was conducted for data cleaning and segmentation. Processed data was validated with traditional activity diaries. The A-GPS data set was then used for visual explorations including density surface visualization and connection analysis to examine space-time activity patterns in relation to chances of influenza infection. Results When compared to diary data, the segmented tracking data demonstrated to be an effective alternative and showed greater accuracies in time as well as the details of routes taken by participants. A comparison of space-time activity patterns between participants who caught seasonal influenza and those who

  4. Sediment Transport Time Scales and Trapping Efficiency in a Tidal River

    Science.gov (United States)

    Ralston, David K.; Geyer, W. Rockwell

    2017-11-01

    Observations and a numerical model are used to characterize sediment transport in the tidal Hudson River. A sediment budget over 11 years including major discharge events indicates the tidal fresh region traps about 40% of the sediment input from the watershed. Sediment input scales with the river discharge cubed, while seaward transport in the tidal river scales linearly, so the tidal river accumulates sediment during the highest discharge events. Sediment pulses associated with discharge events dissipate moving seaward and lag the advection speed of the river by a factor of 1.5 to 3. Idealized model simulations with a range of discharge and settling velocity were used to evaluate the trapping efficiency, transport rate, and mean age of sediment input from the watershed. The seaward transport of suspended sediment scales linearly with discharge but lags the river velocity by a factor that is linear with settling velocity. The lag factor is 30-40 times the settling velocity (mm s-1), so transport speeds vary by orders of magnitude from clay (0.01 mm s-1) to coarse silt (1 mm s-1). Deposition along the tidal river depends strongly on settling velocity, and a simple advection-reaction equation represents the loss due to settling on depositional shoals. The long-term discharge record is used to represent statistically the distribution of transport times, and time scales for settling velocities of 0.1 mm s-1 and 1 mm s-1 range from several months to several years for transport through the tidal river and several years to several decades through the estuary.

  5. Residence time distribution measurements in a pilot-scale poison tank using radiotracer technique.

    Science.gov (United States)

    Pant, H J; Goswami, Sunil; Samantray, J S; Sharma, V K; Maheshwari, N K

    2015-09-01

    Various types of systems are used to control the reactivity and shutting down of a nuclear reactor during emergency and routine shutdown operations. Injection of boron solution (borated water) into the core of a reactor is one of the commonly used methods during emergency operation. A pilot-scale poison tank was designed and fabricated to simulate injection of boron poison into the core of a reactor along with coolant water. In order to design a full-scale poison tank, it was desired to characterize flow of liquid from the tank. Residence time distribution (RTD) measurement and analysis was adopted to characterize the flow dynamics. Radiotracer technique was applied to measure RTD of aqueous phase in the tank using Bromine-82 as a radiotracer. RTD measurements were carried out with two different modes of operation of the tank and at different flow rates. In Mode-1, the radiotracer was instantaneously injected at the inlet and monitored at the outlet, whereas in Mode-2, the tank was filled with radiotracer and its concentration was measured at the outlet. From the measured RTD curves, mean residence times (MRTs), dead volume and fraction of liquid pumped in with time were determined. The treated RTD curves were modeled using suitable mathematical models. An axial dispersion model with high degree of backmixing was found suitable to describe flow when operated in Mode-1, whereas a tanks-in-series model with backmixing was found suitable to describe flow of the poison in the tank when operated in Mode-2. The results were utilized to scale-up and design a full-scale poison tank for a nuclear reactor. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Interrelations between the perception of time and space in large-scale environments.

    Science.gov (United States)

    Riemer, Martin; Hölzl, Rupert; Kleinböhl, Dieter

    2014-04-01

    Interactions between perceived temporal and spatial properties of external stimuli (e.g. duration and size) suggest common neural mechanisms underlying the perception of time and space. This conclusion, however, lacks support from studies in large-scale environments, showing that judgements on travelled distances and associated travel times are independent from each other. Here, we used a different approach to test whether the perception of travelled distances is influenced by the perception of time. Unlike previous studies, in which temporal and spatial judgements were related to the same experience of walking, we assessed time and distance perception in analogous, but separate versions of estimation and production tasks. In estimation tasks, participants estimated the duration of a presented sound (time) or the length of a travelled distance (space), and in production tasks, participants terminated a sound after a numerically specified duration (time) or covered a numerically specified distance (space). The results show systematic overestimation of time and underestimation of travelled distance, and the latter reflecting previously reported misperceptions of visual distance. Time and distance judgements were related within individuals for production, but not for estimation tasks. These results suggest that temporal information might constitute a probabilistic cue for path integration.

  7. Using Citizen Science Observations to Model Species Distributions Over Space, Through Time, and Across Scales

    Science.gov (United States)

    Kelling, S.

    2017-12-01

    The goal of Biodiversity research is to identify, explain, and predict why a species' distribution and abundance vary through time, space, and with features of the environment. Measuring these patterns and predicting their responses to change are not exercises in curiosity. Today, they are essential tasks for understanding the profound effects that humans have on earth's natural systems, and for developing science-based environmental policies. To gain insight about species' distribution patterns requires studying natural systems at appropriate scales, yet studies of ecological processes continue to be compromised by inadequate attention to scale issues. How spatial and temporal patterns in nature change with scale often reflects fundamental laws of physics, chemistry, or biology, and we can identify such basic, governing laws only by comparing patterns over a wide range of scales. This presentation will provide several examples that integrate bird observations made by volunteers, with NASA Earth Imagery using Big Data analysis techniques to analyze the temporal patterns of bird occurrence across scales—from hemisphere-wide views of bird distributions to the impact of powerful city lights on bird migration.

  8. Transport on intermediate time scales in flows with cat's eye patterns

    Science.gov (United States)

    Pöschke, Patrick; Sokolov, Igor M.; Zaks, Michael A.; Nepomnyashchy, Alexander A.

    2017-12-01

    We consider the advection-diffusion transport of tracers in a one-parameter family of plane periodic flows where the patterns of streamlines feature regions of confined circulation in the shape of "cat's eyes," separated by meandering jets with ballistic motion inside them. By varying the parameter, we proceed from the regular two-dimensional lattice of eddies without jets to the sinusoidally modulated shear flow without eddies. When a weak thermal noise is added, i.e., at large Péclet numbers, several intermediate time scales arise, with qualitatively and quantitatively different transport properties: depending on the parameter of the flow, the initial position of a tracer, and the aging time, motion of the tracers ranges from subdiffusive to superballistic. We report on results of extensive numerical simulations of the mean-squared displacement for different initial conditions in ordinary and aged situations. These results are compared with a theory based on a Lévy walk that describes the intermediate-time ballistic regime and gives a reasonable description of the behavior for a certain class of initial conditions. The interplay of the walk process with internal circulation dynamics in the trapped state results at intermediate time scales in nonmonotonic characteristics of aging not captured by the Lévy walk model.

  9. Nuclear magnetic resonance provides a quantitative description of protein conformational flexibility on physiologically important time scales.

    Science.gov (United States)

    Salmon, Loïc; Bouvignies, Guillaume; Markwick, Phineus; Blackledge, Martin

    2011-04-12

    A complete description of biomolecular activity requires an understanding of the nature and the role of protein conformational dynamics. In recent years, novel nuclear magnetic resonance-based techniques that provide hitherto inaccessible detail concerning biomolecular motions occurring on physiologically important time scales have emerged. Residual dipolar couplings (RDCs) provide precise information about time- and ensemble-averaged structural and dynamic processes with correlation times up to the millisecond and thereby encode key information for understanding biological activity. In this review, we present the application of two very different approaches to the quantitative description of protein motion using RDCs. The first is purely analytical, describing backbone dynamics in terms of diffusive motions of each peptide plane, using extensive statistical analysis to validate the proposed dynamic modes. The second is based on restraint-free accelerated molecular dynamics simulation, providing statistically sampled free energy-weighted ensembles that describe conformational fluctuations occurring on time scales from pico- to milliseconds, at atomic resolution. Remarkably, the results from these two approaches converge closely in terms of distribution and absolute amplitude of motions, suggesting that this kind of combination of analytical and numerical models is now capable of providing a unified description of protein conformational dynamics in solution.

  10. Time scales of relaxation dynamics during transient conditions in two-phase flow: RELAXATION DYNAMICS

    Energy Technology Data Exchange (ETDEWEB)

    Schlüter, Steffen [School of Chemical, Biological and Environmental Engineering, Oregon State University, Corvallis Oregon USA; Department Soil Physics, Helmholtz-Centre for Environmental Research-UFZ, Halle Germany; Berg, Steffen [Shell Global Solutions International B.V., Rijswijk Netherlands; Li, Tianyi [School of Chemical, Biological and Environmental Engineering, Oregon State University, Corvallis Oregon USA; Vogel, Hans-Jörg [Department Soil Physics, Helmholtz-Centre for Environmental Research-UFZ, Halle Germany; Institut für Agrar- und Ernährungswissenschaften, Martin-Luther-Universität Halle-Wittenberg, Halle Germany; Wildenschild, Dorthe [School of Chemical, Biological and Environmental Engineering, Oregon State University, Corvallis Oregon USA

    2017-06-01

    The relaxation dynamics toward a hydrostatic equilibrium after a change in phase saturation in porous media is governed by fluid reconfiguration at the pore scale. Little is known whether a hydrostatic equilibrium in which all interfaces come to rest is ever reached and which microscopic processes govern the time scales of relaxation. Here we apply fast synchrotron-based X-ray tomography (X-ray CT) to measure the slow relaxation dynamics of fluid interfaces in a glass bead pack after fast drainage of the sample. The relaxation of interfaces triggers internal redistribution of fluids, reduces the surface energy stored in the fluid interfaces, and relaxes the contact angle toward the equilibrium value while the fluid topology remains unchanged. The equilibration of capillary pressures occurs in two stages: (i) a quick relaxation within seconds in which most of the pressure drop that built up during drainage is dissipated, a process that is to fast to be captured with fast X-ray CT, and (ii) a slow relaxation with characteristic time scales of 1–4 h which manifests itself as a spontaneous imbibition process that is well described by the Washburn equation for capillary rise in porous media. The slow relaxation implies that a hydrostatic equilibrium is hardly ever attained in practice when conducting two-phase experiments in which a flux boundary condition is changed from flow to no-flow. Implications for experiments with pressure boundary conditions are discussed.

  11. Modified multiple time scale method for solving strongly nonlinear damped forced vibration systems

    Science.gov (United States)

    Razzak, M. A.; Alam, M. Z.; Sharif, M. N.

    2018-03-01

    In this paper, modified multiple time scale (MTS) method is employed to solve strongly nonlinear forced vibration systems. The first-order approximation is only considered in order to avoid complexicity. The formulations and the determination of the solution procedure are very easy and straightforward. The classical multiple time scale (MS) and multiple scales Lindstedt-Poincare method (MSLP) do not give desire result for the strongly damped forced vibration systems with strong damping effects. The main aim of this paper is to remove these limitations. Two examples are considered to illustrate the effectiveness and convenience of the present procedure. The approximate external frequencies and the corresponding approximate solutions are determined by the present method. The results give good coincidence with corresponding numerical solution (considered to be exact) and also provide better result than other existing results. For weak nonlinearities with weak damping effect, the absolute relative error measures (first-order approximate external frequency) in this paper is only 0.07% when amplitude A = 1.5 , while the relative error gives MSLP method is surprisingly 28.81%. Furthermore, for strong nonlinearities with strong damping effect, the absolute relative error found in this article is only 0.02%, whereas the relative error obtained by MSLP method is 24.18%. Therefore, the present method is not only valid for weakly nonlinear damped forced systems, but also gives better result for strongly nonlinear systems with both small and strong damping effect.

  12. Effective Pore-Scale Dispersion Upscaling with the Correlated Continuous Time Random Walk Approach

    Energy Technology Data Exchange (ETDEWEB)

    Le Borgne, Tanguy; Bolster, Diogo; Dentz, Marco; de Anna, Pietro; Tartakovsky, Alexandre M.

    2011-12-29

    We propose a general framework for upscaling dispersion in porous media. A key challenge of the upscaling procedure is to relate the temporal evolution of spreading to the small scale velocity field properties. The representation of the Lagrangian velocity transition process as a Markovian process in space provides a simple way to quantify complex correlation properties, i.e. non-Gaussian velocity distributions. The resulting effective transport model is a correlated CTRW. We use this framework to upscale pore scale dispersion for a periodic pore geometry. The correlated CTRW model is defined by the transit time distribution across one pore and the transition probability density quantifying the correlation between successive transit times. The latter is of central importance since it accounts for incomplete mixing at the pore throats. The predictions of the correlated CTRW model are in good agreement with the pore scale simulations over the pre-asymptotic and asymptotic regimes. We investigate the representation of this effective dispersion model in phase space (position, velocity) in a form similar to a Boltzmann transport equation.

  13. Bedload transport flux fluctuations over a wide range of time scales

    Science.gov (United States)

    Ma, H.; Fu, X.; Ancey, C.

    2014-12-01

    Bedload transport is a highly fluctuating process. Our previous study (Ma et al., 2014) demonstrated a three-regime relation of the variance of bedload transport flux across a wide range of sampling time scales. This study further explored the fluctuation spectrum of at-a-point bedload transport flux with different sampling times. We derived out analytical solutions of the third- and fourth-order moments of bedload transport flux, based on a physically-based formulation (Ancey et al., 2008; Ma et al., 2014). A formulation of the probability density function of bedload transport flux was constructed based on the 1st through 4th order moments. Experimental data were used to test against the solutions of both the moments and PDF. Interestingly, the higher order statistical moments were found to exhibit the three-regime pattern as well. This study contributes to a comprehensive understanding of bedload transport flux fluctuation and emphasizes its timescale-dependent features resulting from the discrete nature and correlated motion of bedload material. The correlated structures of bedload transport, such as bed forms and particle clusters, deserve to be further exploration in future studies. Keywords: bedload transport; stochastic theory; high order moment; fluctuation; time scale; PDF. Ancey, C., Davison, A. C., Bohm, T., Jodeau, M., and Frey, P. Entrainment and motion of coarse particles in a shallow water stream down a steep slope, Journal of Fluid Mechanics, 2008, 595, 83-114, doi: 10.1017/S0022112007008774. Ma, H. B., Heyman, J., Fu, X. D., Mettra, F., Ancey, C. and Parker, G. Bedload transport over a broad range of time scales: determination of three regimes of fluctuations. Journal of Geophysical Research-Earth Surface, 2014. (under review)

  14. Prey and mound disassembly, manipulation and transport by fire ant collectives

    Science.gov (United States)

    Dutta, Bahnisikha; Monaenkova, Daria; Goodisman, Michael A.; Goldman, Daniel

    Fire ants inhabit subterranean nests covered by a hemispherical mound of soil permeated by narrow ( 1 body length diameter) tunnels. Fire ants can use their mound for long-term food storage [Gayahan &Tschinkel, J. Insect Sci.,2008]. Since mound tunnels are narrow, we expect that in addition to prey manipulation, mound reconfiguration could also be an important aspect of the food storage strategy. Ant colonies collected from wild were allowed to build nests in containers filled with clay soil in the laboratory. These colonies were offered diverse prey embedded with lead markers, including mealworms, crickets and shrimp. Ant-prey-soil interactions on the nest surface were recorded using overhead video and subsurface using x-ray imaging. Individual ants involved in prey storage exhibited three distinct behaviors: prey maneuvering, prey dissection and mound reconfiguration. Small prey (e.g. mealworms) were collectively carried intact into the mound through a tunnel, and then disassembled within the mound. Larger prey (e.g. shrimp) were dismantled into small pieces above the surface and carried to mound tunnels. The bodies of hard medium-sized prey (e.g. crickets) were buried after limb removal and then disassembled and moved into tunnels. Soil reconfiguration occurred in all cases.

  15. Asymmetric ring structure of Vps4 required for ESCRT-III disassembly

    Science.gov (United States)

    Caillat, Christophe; Macheboeuf, Pauline; Wu, Yuanfei; McCarthy, Andrew A.; Boeri-Erba, Elisabetta; Effantin, Gregory; Göttlinger, Heinrich G.; Weissenhorn, Winfried; Renesto, Patricia

    2015-12-01

    The vacuolar protein sorting 4 AAA-ATPase (Vps4) recycles endosomal sorting complexes required for transport (ESCRT-III) polymers from cellular membranes. Here we present a 3.6-Å X-ray structure of ring-shaped Vps4 from Metallosphera sedula (MsVps4), seen as an asymmetric pseudohexamer. Conserved key interface residues are shown to be important for MsVps4 assembly, ATPase activity in vitro, ESCRT-III disassembly in vitro and HIV-1 budding. ADP binding leads to conformational changes within the protomer, which might propagate within the ring structure. All ATP-binding sites are accessible and the pseudohexamer binds six ATP with micromolar affinity in vitro. In contrast, ADP occupies one high-affinity and five low-affinity binding sites in vitro, consistent with conformational asymmetry induced on ATP hydrolysis. The structure represents a snapshot of an assembled Vps4 conformation and provides insight into the molecular motions the ring structure undergoes in a concerted action to couple ATP hydrolysis to ESCRT-III substrate disassembly.

  16. Stimuli-disassembling gold nanoclusters for diagnosis of early stage oral cancer by optical coherence tomography

    Science.gov (United States)

    Kim, Chang Soo; Ingato, Dominique; Wilder-Smith, Petra; Chen, Zhongping; Kwon, Young Jik

    2018-01-01

    A key design consideration in developing contrast agents is obtaining distinct, multiple signal changes in diseased tissue. Plasmonic gold nanoparticles (Au NPs) have been developed as contrast agents due to their strong surface plasmon resonance (SPR). This study aims to demonstrate that stimuli-responsive plasmonic Au nanoclusters (Au NCs) can be used as a contrast agent for optical coherence tomography (OCT) in detecting early-stage cancer. Au NPs were clustered via acid-cleavable linkers to synthesize Au NCs that disassemble under mildly acidic conditions into individual Au NPs, simultaneously diminishing SPR effect (quantified by scattering intensity) and increasing Brownian motion (quantified by Doppler variance). The acid-triggered morphological and accompanying optico-physical property changes of the acid-disassembling Au NCs were confirmed by TEM, DLS, UV/Vis, and OCT. Stimuli-responsive Au NCs were applied in a hamster check pouch model carrying early-stage squamous carcinoma tissue. The tissue was visualized by OCT imaging, which showed reduced scattering intensity and increased Doppler variance in the dysplastic tissue. This study demonstrates the promise of diagnosing early-stage cancer using molecularly programmable, inorganic nanomaterial-based contrast agents that are capable of generating multiple, stimuli-triggered diagnostic signals in early-stage cancer.[Figure not available: see fulltext.

  17. Whole cell cryo-electron tomography reveals distinct disassembly intermediates of vaccinia virus.

    Directory of Open Access Journals (Sweden)

    Marek Cyrklaff

    Full Text Available At each round of infection, viruses fall apart to release their genome for replication, and then reassemble into stable particles within the same host cell. For most viruses, the structural details that underlie these disassembly and assembly reactions are poorly understood. Cryo-electron tomography (cryo-ET, a unique method to investigate large and asymmetric structures at the near molecular resolution, was previously used to study the complex structure of vaccinia virus (VV. Here we study the disassembly of VV by cryo-ET on intact, rapidly frozen, mammalian cells, infected for up to 60 minutes. Binding to the cell surface induced distinct structural rearrangements of the core, such as a shape change, the rearrangement of its surface spikes and de-condensation of the viral DNA. We propose that the cell surface induced changes, in particular the decondensation of the viral genome, are a prerequisite for the subsequent release of the vaccinia DNA into the cytoplasm, which is followed by its cytoplasmic replication. Generally, this is the first study that employs whole cell cryo-ET to address structural details of pathogen-host cell interaction.

  18. A reference relative time-scale as an alternative to chronological age for cohorts with long follow-up.

    Science.gov (United States)

    Hurley, Margaret Anne

    2015-01-01

    Epidemiologists have debated the appropriate time-scale for cohort survival studies; chronological age or time-on-study being two such time-scales. Importantly, assessment of risk factors may depend on the choice of time-scale. Recently, chronological or attained age has gained support but a case can be made for a 'reference relative time-scale' as an alternative which circumvents difficulties that arise with this and other scales. The reference relative time of an individual participant is the integral of a reference population hazard function between time of entry and time of exit of the individual. The objective here is to describe the reference relative time-scale, illustrate its use, make comparison with attained age by simulation and explain its relationship to modern and traditional epidemiologic methods. A comparison was made between two models; a stratified Cox model with age as the time-scale versus an un-stratified Cox model using the reference relative time-scale. The illustrative comparison used a UK cohort of cotton workers, with differing ages at entry to the study, with accrual over a time period and with long follow-up. Additionally, exponential and Weibull models were fitted since the reference relative time-scale analysis need not be restricted to the Cox model. A simulation study showed that analysis using the reference relative time-scale and analysis using chronological age had very similar power to detect a significant risk factor and both were equally unbiased. Further, the analysis using the reference relative time-scale supported fully-parametric survival modelling and allowed percentile predictions and mortality curves to be constructed. The reference relative time-scale was a viable alternative to chronological age, led to simplification of the modelling process and possessed the defined features of a good time-scale as defined in reliability theory. The reference relative time-scale has several interpretations and provides a unifying

  19. Wildfire Disturbance and Sediment Transfers over Millennial Time Scales: A Numerical Modelling Study

    Science.gov (United States)

    Martin, Y.

    2003-12-01

    Wildfire may lead to accelerated soil erosion, debris flow and shallow landsliding activity in the years following disturbance. This study focuses on coastal drainage basins in British Columbia over millennial time scales, for which accelerated rates of shallow landsliding following wildfire may be of particular significance. An algorithm for wildfire occurrence, based on lake and sediment charcoal studies undertaken in coastal British Columbia and western Washington over millennial time scales (for example, Gavin et al., 2003), is incorporated into a numerical model of sediment routing over these same time scales. A stochastic rule set for wildfire frequency, based on a Weibull distribution of fire return intervals, assigns years of fire occurrence in the model. In terms of location, south-facing aspects are assigned a 25 times greater susceptibility to wildfire than north-facing aspects. As a first-order approximation, it is supposed that loss of tree root strength resulting from stand-replacing wildfires is comparable in its effects to clearcut logging. Therefore, documentation of increased shallow landslide activity associated with logging is used to adjust landsliding transport equations for the years following wildfire disturbance. Thereafter, landsliding rates are returned to pre-disturbance values. Fire return intervals, particularly those on north-facing aspects, can be relatively long in coastal British Columbia when compared to return intervals typically found in drier mountain ranges. This study investigates the degree to which wildfire disturbance affects sediment routing and delivery to channels over millennial time scales in coastal British Columbia. Sensitivity to model parameters is evaluated. Further investigations of wildfire effects on geomorphic process operation will lead to improved understanding of natural disturbance regimes to which ecosystems adjust over both the short and long term. Such information can be used to evaluate possible

  20. Intramolecular stable isotope distributions detect plant metabolic responses on century time scales

    Science.gov (United States)

    Schleucher, Jürgen; Ehlers, Ina; Augusti, Angela; Betson, Tatiana

    2014-05-01

    Plants respond to environmental changes on a vast range of time scales, and plant gas exchanges constitute important feedback mechanisms in the global C cycle. Responses on time scales of decades to centuries are most important for climate models, for prediction of crop productivity, and for adaptation to climate change. Unfortunately, responses on these timescale are least understood. We argue that the knowledge gap on intermediate time scales is due to a lack of adequate methods that can bridge between short-term manipulative experiments (e.g. FACE) and paleo research. Manipulative experiments in plant ecophysiology give information on metabolism on time scales up to years. However, this information cannot be linked to results from retrospective studies in paleo research, because little metabolic information can be derived from paleo archives. Stable isotopes are prominent tools in plant ecophysiology, biogeochemistry and in paleo research, but in all applications to date, isotope ratios of whole molecules are measured. However, it is well established that stable isotope abundance varies among intramolecular groups of biochemical metabolites, that is each so-called "isotopomer" has a distinct abundance. This intramolecular variation carries information on metabolic regulation, which can even be traced to individual enzymes (Schleucher et al., Plant, Cell Environ 1999). Here, we apply intramolecular isotope distributions to study the metabolic response of plants to increasing atmospheric [CO2] during the past century. Greenhouse experiments show that the deuterium abundance among the two positions in the C6H2 group of photosynthetic glucose depends on [CO2] during growth. This is observed for all plants using C3 photosynthesis, and reflects the metabolic flux ratio between photorespiration and photosynthesis. Photorespiration is a major C flux that limits assimilation in C3 plants, which encompass the overwhelming fraction of terrestrial photosynthesis and the

  1. Real-Time Monitoring System for a Utility-Scale Photovoltaic Power Plant

    Science.gov (United States)

    Moreno-Garcia, Isabel M.; Palacios-Garcia, Emilio J.; Pallares-Lopez, Victor; Santiago, Isabel; Gonzalez-Redondo, Miguel J.; Varo-Martinez, Marta; Real-Calvo, Rafael J.

    2016-01-01

    There is, at present, considerable interest in the storage and dispatchability of photovoltaic (PV) energy, together with the need to manage power flows in real-time. This paper presents a new system, PV-on time, which has been developed to supervise the operating mode of a Grid-Connected Utility-Scale PV Power Plant in order to ensure the reliability and continuity of its supply. This system presents an architecture of acquisition devices, including wireless sensors distributed around the plant, which measure the required information. It is also equipped with a high-precision protocol for synchronizing all data acquisition equipment, something that is necessary for correctly establishing relationships among events in the plant. Moreover, a system for monitoring and supervising all of the distributed devices, as well as for the real-time treatment of all the registered information, is presented. Performances were analyzed in a 400 kW transformation center belonging to a 6.1 MW Utility-Scale PV Power Plant. In addition to monitoring the performance of all of the PV plant’s components and detecting any failures or deviations in production, this system enables users to control the power quality of the signal injected and the influence of the installation on the distribution grid. PMID:27240365

  2. Model based analysis of the time scales associated to pump start-ups

    Energy Technology Data Exchange (ETDEWEB)

    Dazin, Antoine, E-mail: antoine.dazin@lille.ensam.fr [Arts et métiers ParisTech/LML Laboratory UMR CNRS 8107, 8 bld Louis XIV, 59046 Lille cedex (France); Caignaert, Guy [Arts et métiers ParisTech/LML Laboratory UMR CNRS 8107, 8 bld Louis XIV, 59046 Lille cedex (France); Dauphin-Tanguy, Geneviève, E-mail: genevieve.dauphin-tanguy@ec-lille.fr [Univ Lille Nord de France, Ecole Centrale de Lille/CRISTAL UMR CNRS 9189, BP 48, 59651, Villeneuve d’Ascq cedex F 59000 (France)

    2015-11-15

    Highlights: • A dynamic model of a hydraulic system has been built. • Three periods in a pump start-up have been identified. • The time scales of each period have been estimated. • The parameters affecting the rapidity of a pump start-up have been explored. - Abstract: The paper refers to a non dimensional analysis of the behaviour of a hydraulic system during pump fast start-ups. The system is composed of a radial flow pump and its suction and delivery pipes. It is modelled using the bond graph methodology. The prediction of the model is validated by comparison to experimental results. An analysis of the time evolution of the terms acting on the total pump pressure is proposed. It allows for a decomposition of the start-up into three consecutive periods. The time scales associated with these periods are estimated. The effects of parameters (angular acceleration, final rotation speed, pipe length and resistance) affecting the start-up rapidity are then explored.

  3. Attosecond Physics - Probing and Controlling Matter on Its Natural Time Scale

    Science.gov (United States)

    Starace, Anthony F.

    2014-03-01

    The goal of attosecond physics is to probe and control matter on its natural time scale, which for electronic motion in atoms, molecules, and solids is measured in attoseconds (= 10-18 sec). Both single attosecond pulses and attosecond pulse trains can be produced. Such pulses have opened new avenues for time-domain studies of multi-electron dynamics in atoms, molecules, and solids on their natural time scale and at dimensions shorter than molecular and even atomic dimensions. They promise a revolution in our microscopic knowledge and understanding of matter. At present the intensities of isolated attosecond pulses are very weak, so that perturbation theory is sufficient to describe the interaction of attosecond pulses with matter. Consequently, they can only be used either to initiate (``pump'') a physical process or to probe a process already under way by other means. Experimental efforts currently aim to increase the intensities of isolated attosecond pulses by orders of magnitude. Intense attosecond pulses will open the regime of nonlinear attosecond physics, in which pump/probe processes with isolated attosecond pulses will become possible and in which the broad bandwidth of isolated few-cycle attosecond pulses will enable significant control over electron motion. Work supported in part by AFOSR Award No. FA9550-12-1-0149; by DOE Office of Science, Division of Chemical Sciences, Geosciences, and Biosciences, Grant No. DE-FG03-96ER14646; and by NSF Grant No. PHY-1208059.

  4. Real-Time Monitoring System for a Utility-Scale Photovoltaic Power Plant

    Directory of Open Access Journals (Sweden)

    Isabel M. Moreno-Garcia

    2016-05-01

    Full Text Available There is, at present, considerable interest in the storage and dispatchability of photovoltaic (PV energy, together with the need to manage power flows in real-time. This paper presents a new system, PV-on time, which has been developed to supervise the operating mode of a Grid-Connected Utility-Scale PV Power Plant in order to ensure the reliability and continuity of its supply. This system presents an architecture of acquisition devices, including wireless sensors distributed around the plant, which measure the required information. It is also equipped with a high-precision protocol for synchronizing all data acquisition equipment, something that is necessary for correctly establishing relationships among events in the plant. Moreover, a system for monitoring and supervising all of the distributed devices, as well as for the real-time treatment of all the registered information, is presented. Performances were analyzed in a 400 kW transformation center belonging to a 6.1 MW Utility-Scale PV Power Plant. In addition to monitoring the performance of all of the PV plant’s components and detecting any failures or deviations in production, this system enables users to control the power quality of the signal injected and the influence of the installation on the distribution grid.

  5. Municipal scale scenario: Analysis of an Italian seaside town with MarkAL-TIMES

    International Nuclear Information System (INIS)

    Comodi, G.; Cioccolanti, L.; Gargiulo, M.

    2012-01-01

    This work presents three 25-year energy scenarios developed with the TIMES model generator for Pesaro, a seaside municipality in central Italy. It evaluates the effectiveness of local-scale energy policies in three sectors: households, transport, and the public sector (PS). Since the local energy demand is affected by summer tourism, seasonal consumption by holiday homes was also studied. Three scenarios were hypothesized: Business as Usual (BAU), Exemplary Public Sector (EPS), and Exemplary Municipality (EM). The EPS scenario models the exemplary role that recent European directives attribute to the PS in setting energy efficiency and technology penetration targets for itself; the EM scenario extends these targets to the household sector. In particular, the study underscores the potential of micro-cogeneration technologies in achieving local environmental targets, even though their diffusion would involve an increase in local energy consumption due to internalization of the primary energy used to produce electricity, which would no longer be wholly imported from outside municipal boundaries. The study provides information to local decision-makers by estimating the cost of implementing a number of energy policies. Finally, the study discusses the adequacy of TIMES as a tool to analyse municipal-scale scenarios. - Highlights: ► The main sectors investigated are transportation, household, and public sector. ► To account of touristic season holyday homes are modelled separately. ► Energy efficiency and renewables can help to highly reduce local consumptions. ► Micro-chp increases local consumption internalizing electricity self-production. ► Provide an insight on the adequacy of the use of TIMES at municipal scale.

  6. The Steppengrille (Gryllus spec./assimilis: selective filters and signal mismatch on two time scales.

    Directory of Open Access Journals (Sweden)

    Matti Michael Rothbart

    Full Text Available In Europe, several species of crickets are available commercially as pet food. Here we investigated the calling song and phonotactic selectivity for sound patterns on the short and long time scales for one such a cricket, Gryllus spec., available as "Gryllus assimilis", the Steppengrille, originally from Ecuador. The calling song consisted of short chirps (2-3 pulses, carrier frequency: 5.0 kHz emitted with a pulse period of 30.2 ms and chirp rate of 0.43 per second. Females exhibited high selectivity on both time scales. The preference for pulse period peaked at 33 ms which was higher then the pulse period produced by males. Two consecutive pulses per chirp at the correct pulse period were already sufficient for positive phonotaxis. The preference for the chirp pattern was limited by selectivity for small chirp duty cycles and for chirp periods between 200 ms and 500 ms. The long chirp period of the songs of males was unattractive to females. On both time scales a mismatch between the song signal of the males and the preference of females was observed. The variability of song parameters as quantified by the coefficient of variation was below 50% for all temporal measures. Hence, there was not a strong indication for directional selection on song parameters by females which could account for the observed mismatch. The divergence of the chirp period and female preference may originate from a founder effect, when the Steppengrille was cultured. Alternatively the mismatch was a result of selection pressures exerted by commercial breeders on low singing activity, to satisfy customers with softly singing crickets. In the latter case the prominent divergence between male song and female preference was the result of domestication and may serve as an example of rapid evolution of song traits in acoustic communication systems.

  7. Multi-scale simulations of droplets in generic time-dependent flows

    Science.gov (United States)

    Milan, Felix; Biferale, Luca; Sbragaglia, Mauro; Toschi, Federico

    2017-11-01

    We study the deformation and dynamics of droplets in time-dependent flows using a diffuse interface model for two immiscible fluids. The numerical simulations are at first benchmarked against analytical results of steady droplet deformation, and further extended to the more interesting case of time-dependent flows. The results of these time-dependent numerical simulations are compared against analytical models available in the literature, which assume the droplet shape to be an ellipsoid at all times, with time-dependent major and minor axis. In particular we investigate the time-dependent deformation of a confined droplet in an oscillating Couette flow for the entire capillary range until droplet break-up. In this way these multi component simulations prove to be a useful tool to establish from ``first principles'' the dynamics of droplets in complex flows involving multiple scales. European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No 642069. & European Research Council under the European Community's Seventh Framework Program, ERC Grant Agreement No 339032.

  8. EEG correlates of cognitive time scales in the Necker-Zeno model for bistable perception.

    Science.gov (United States)

    Kornmeier, J; Friedel, E; Wittmann, M; Atmanspacher, H

    2017-08-01

    The Necker-Zeno model of bistable perception provides a formal relation between the average duration of meta-stable percepts (dwell times T) of ambiguous figures and two other basic time scales (t 0 , ΔT) underlying cognitive processing. The model predicts that dwell times T covary with t 0 , ΔT or both. We tested this prediction by exploiting that observers, in particular experienced meditators, can volitionally control dwell times T. Meditators and non-meditators observed bistable Necker cubes either passively or tried to hold their current percept. The latencies of a centro-parietal event-related potential (CPP) were recorded as a physiological correlate of t 0 . Dwell times T and the CPP latencies, correlated with t 0 , differed between conditions and observer groups, while ΔT remained constant in the range predicted by the model. The covariation of CPP latencies and dwell times, as well as their quadratic functional dependence extends previous psychophysical confirmation of the Necker-Zeno model to psychophysiological measures. Copyright © 2017. Published by Elsevier Inc.

  9. Versatile synchronized real-time MEG hardware controller for large-scale fast data acquisition

    Science.gov (United States)

    Sun, Limin; Han, Menglai; Pratt, Kevin; Paulson, Douglas; Dinh, Christoph; Esch, Lorenz; Okada, Yoshio; Hämäläinen, Matti

    2017-05-01

    Versatile controllers for accurate, fast, and real-time synchronized acquisition of large-scale data are useful in many areas of science, engineering, and technology. Here, we describe the development of a controller software based on a technique called queued state machine for controlling the data acquisition (DAQ) hardware, continuously acquiring a large amount of data synchronized across a large number of channels (>400) at a fast rate (up to 20 kHz/channel) in real time, and interfacing with applications for real-time data analysis and display of electrophysiological data. This DAQ controller was developed specifically for a 384-channel pediatric whole-head magnetoencephalography (MEG) system, but its architecture is useful for wide applications. This controller running in a LabVIEW environment interfaces with microprocessors in the MEG sensor electronics to control their real-time operation. It also interfaces with a real-time MEG analysis software via transmission control protocol/internet protocol, to control the synchronous acquisition and transfer of the data in real time from >400 channels to acquisition and analysis workstations. The successful implementation of this controller for an MEG system with a large number of channels demonstrates the feasibility of employing the present architecture in several other applications.

  10. Epidemic mitigation via awareness propagation in communication networks: the role of time scales

    Science.gov (United States)

    Wang, Huijuan; Chen, Chuyi; Qu, Bo; Li, Daqing; Havlin, Shlomo

    2017-07-01

    The participation of individuals in multi-layer networks allows for feedback between network layers, opening new possibilities to mitigate epidemic spreading. For instance, the spread of a biological disease such as Ebola in a physical contact network may trigger the propagation of the information related to this disease in a communication network, e.g. an online social network. The information propagated in the communication network may increase the awareness of some individuals, resulting in them avoiding contact with their infected neighbors in the physical contact network, which might protect the population from the infection. In this work, we aim to understand how the time scale γ of the information propagation (speed that information is spread and forgotten) in the communication network relative to that of the epidemic spread (speed that an epidemic is spread and cured) in the physical contact network influences such mitigation using awareness information. We begin by proposing a model of the interaction between information propagation and epidemic spread, taking into account the relative time scale γ. We analytically derive the average fraction of infected nodes in the meta-stable state for this model (i) by developing an individual-based mean-field approximation (IBMFA) method and (ii) by extending the microscopic Markov chain approach (MMCA). We show that when the time scale γ of the information spread relative to the epidemic spread is large, our IBMFA approximation is better compared to MMCA near the epidemic threshold, whereas MMCA performs better when the prevalence of the epidemic is high. Furthermore, we find that an optimal mitigation exists that leads to a minimal fraction of infected nodes. The optimal mitigation is achieved at a non-trivial relative time scale γ, which depends on the rate at which an infected individual becomes aware. Contrary to our intuition, information spread too fast in the communication network could reduce the

  11. Hybrid approximations via second order combined dynamic derivatives on time scales

    Directory of Open Access Journals (Sweden)

    Qin Sheng

    2007-09-01

    Full Text Available This article focuses on the approximation of conventional second order derivative via the combined (diamond-$\\alpha$ dynamic derivative on time scales with necessary smoothness conditions embedded. We will show the constraints under which the second order dynamic derivative provides a consistent approximation to the conventional second derivative; the cases where the dynamic derivative approximates the derivative only via a proper modification of the existing formula; and the situations in which the dynamic derivative can never approximate consistently even with the help of available structure correction methods. Constructive error analysis will be given via asymptotic expansions for practical hybrid modeling and computational applications.

  12. Method for Hot Real-Time Analysis of Pyrolysis Vapors at Pilot Scale

    Energy Technology Data Exchange (ETDEWEB)

    Pomeroy, Marc D [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-29

    Pyrolysis oils contain more than 400 compounds, up to 60% of which do not re-volatilize for subsequent chemical analysis. Vapor chemical composition is also complicated as additional condensation reactions occur during quenching and collection of the product. Due to the complexity of the pyrolysis oil, and a desire to catalytically upgrade the vapor composition before condensation, online real-time analytical techniques such as Molecular Beam Mass Spectrometry (MBMS) are of great use. However, in order to properly sample hot pyrolysis vapors at the pilot scale, many challenges must be overcome.

  13. Stability and periodicity of solutions for delay dynamic systems on time scales

    Directory of Open Access Journals (Sweden)

    Zhi-Qiang Zhu

    2014-04-01

    Full Text Available This article concerns the stability and periodicity of solutions to the delay dynamic system $$ x^{\\triangle}(t=A(t x(t + F(t, x(t, x(g(t+C(t $$ on a time scale. By the inequality technique for vectors, we obtain some stability criteria for the above system. Then, by using the Horn fixed point theorem, we present some conditions under which our system is asymptotically periodic and its periodic solution is unique. In particular, the periodic solution is positive under proper assumptions.

  14. Control of modular multilevel converters based on time-scale analysis and orthogonal functions

    DEFF Research Database (Denmark)

    Zarri, L.; Tani, A.; Mengoni, M.

    2014-01-01

    Modular multilevel converter (MMC) is a promising multilevel topology for high-voltage applications that has been developed in recent years. The control of MMCs has been analyzed in detail in many papers, showing that the converter capacitors can be kept charged and balanced by controlling...... current is still a complex task and cannot be fully tackled with traditional linear control techniques. In this paper a multiple time-scale analysis is proposed to determine an approximated model of the MMC that can be used to solve the control problem of the capacitor voltages. In addition, it is shown...

  15. A critical oscillation constant as a variable of time scales for half-linear dynamic equations

    Czech Academy of Sciences Publication Activity Database

    Řehák, Pavel

    2010-01-01

    Roč. 60, č. 2 (2010), s. 237-256 ISSN 0139-9918 R&D Projects: GA AV ČR KJB100190701 Institutional research plan: CEZ:AV0Z10190503 Keywords : dynamic equation * time scale * half-linear equation * (non)oscillation criteria * Hille-Nehari criteria * Kneser criteria * critical constant * oscillation constant * Hardy inequality Subject RIV: BA - General Mathematics Impact factor: 0.316, year: 2010 http://link.springer.com/article/10.2478%2Fs12175-010-0009-7

  16. The Sensitivity of Income Polarization - Time, length of accounting periods, equivalence scales, and income definitions

    DEFF Research Database (Denmark)

    Azhar, Hussain

    This study looks at polarization and its components’ sensitivity to assumptions about equivalence scales, income definition, ethical income distribution parameters, and the income accounting period. A representative sample of Danish individual incomes from 1984 to 2002 is utilised. Results show...... that polarization has increased over time, regardless of the applied measure, when the last part of the period is compared to the first part of the period. Primary causes being increased inequality (alienation) and faster income growth among high incomes relative to those in the middle of the distribution...

  17. Multi-time-scale X-ray reverberation mapping of accreting black holes

    Science.gov (United States)

    Mastroserio, Guglielmo; Ingram, Adam; van der Klis, Michiel

    2018-04-01

    Accreting black holes show characteristic reflection features in their X-ray spectrum, including an iron Kα line, resulting from hard X-ray continuum photons illuminating the accretion disc. The reverberation lag resulting from the path-length difference between direct and reflected emission provides a powerful tool to probe the innermost regions around both stellar-mass and supermassive black holes. Here, we present for the first time a reverberation mapping formalism that enables modelling of energy-dependent time lags and variability amplitude for a wide range of variability time-scales, taking the complete information of the cross-spectrum into account. We use a pivoting power-law model to account for the spectral variability of the continuum that dominates over the reverberation lags for longer time-scale variability. We use an analytic approximation to self-consistently account for the non-linear effects caused by this continuum spectral variability, which have been ignored by all previous reverberation studies. We find that ignoring these non-linear effects can bias measurements of the reverberation lags, particularly at low frequencies. Since our model is analytic, we are able to fit simultaneously for a wide range of Fourier frequencies without prohibitive computational expense. We also introduce a formalism of fitting to real and imaginary parts of our cross-spectrum statistic, which naturally avoids some mistakes/inaccuracies previously common in the literature. We perform proof-of-principle fits to Rossi X-ray Timing Explorer data of Cygnus X-1.

  18. A Perturbed Ostrowski-Type Inequality on Time Scales for k Points for Functions Whose Second Derivatives Are Bounded

    Directory of Open Access Journals (Sweden)

    Wenbing Chen

    2008-12-01

    Full Text Available We first derive a perturbed Ostrowski-type inequality on time scales for k points for functions whose second derivatives are bounded and then unify corresponding continuous and discrete versions. We also point out some particular perturbed integral inequalities on time scales for functions whose second derivatives are bounded as special cases.

  19. A new approach to motion control of torque-constrained manipulators by using time-scaling of reference trajectories

    International Nuclear Information System (INIS)

    Moreno-Valenzuela, Javier; Orozco-Manriquez, Ernesto

    2009-01-01

    We introduce a control scheme based on using a trajectory tracking controller and an algorithm for on-line time scaling of the reference trajectories. The reference trajectories are time-scaled according to the measured tracking errors and the detected torque/acceleration saturation. Experiments are presented to illustrate the advantages of the proposed approach

  20. Time Resolved Scanning PIV measurements at fine scales in a turbulent jet

    International Nuclear Information System (INIS)

    Cheng, Y.; Torregrosa, M.M.; Villegas, A.; Diez, F.J.

    2011-01-01

    The temporal and spatial complexity of turbulent flows at intermediate and small scales has prevented the acquisition of full three-dimensional experimental data sets for validating classical turbulent theory and Direct Numerical Simulations (DNS). Experimental techniques like Particle Velocimetry, PIV, allow non-intrusive planar measurements of turbulent flows. The present work applied a Time Resolved Scanning PIV system, TRS-PIV, capable of obtaining three-dimensional two-component velocities to measure the small scales of a turbulent jet. When probing the small scales of these flows with PIV, the uncertainty of the measured turbulent properties are determined by the characteristics of the PIV system and specially the thickness of the laser sheet. A measurement of the particle distribution across the thickness of the laser sheet is proposed as a more detailed description of the PIV sheet thickness. The high temporal and spatial resolution of the TRS-PIV system allowed obtaining quasi-instantaneous volumetric vector fields at the far field of a round turbulent jet in water, albeit for a low Reynolds number of 1478 due to the speed limitations of the present camera and scanning system. Six of the nine components of the velocity gradient tensor were calculated from the velocity measurements. This allowed the visualization with near Kolmogorov-scale resolution of the velocity gradient structures in three-dimensional space. In general, these structures had a complex geometry corresponding to elongated shapes in the form of sheets and tubes. An analysis of the probability density function, pdf, of the velocity gradients calculated showed that the on-diagonal (off-diagonal) velocity gradient components were very similar to each other even for events at the tails of the pdfs, as required for homogeneous isotropy. The root mean square of the components of the velocity gradients is also calculated and their ratio of off-diagonal components to on-diagonal components

  1. Variability of scaling time series in the Arctic sea-ice drift dynamics

    Directory of Open Access Journals (Sweden)

    A. Chmel

    2010-02-01

    Full Text Available The motion of an individual ice floe in the Arctic Ocean was monitored at the Russian research station North Pole 35 established on the ice pack in 2008. The ice floe speed (V was found to be correlated with wind speed (v in main features, such as the positions of maxima and minima of V and v. However, the fine structure of the V-variation cannot be explained by the wind forcing alone. There were periods of time when the floe drift was affected by the interactions of ice floes between each other or by the periodical forcing due to either the Coriolis inertia effect or the tidal activity. These data were compared with the "waiting times" statistics that are the distributions of time intervals between subsequent, sufficiently strong changes in the kinetic energy of drifting ice floe. These distributions were measured in several time windows differing in the average wind speed and wind direction, and/or in the mechanical state of the ice pack. The distribution functions N (t>τ, where N is the number of successive events of energy change separated by the time interval t that exceeds τ, constructed in different time windows demonstrate fractal or a multifractal nature of the time series during motion in the consolidated ice pack but were truly random when the ice floe drifted in the highly fragmented sea ice. The latter result shows the existence of a relationship between the long-range mechanical interactions in the pack and long-term memory (time scaling behaviour of the sea-ice motion.

  2. Confronting remote sensing product with ground base measurements across time and scale

    Science.gov (United States)

    Pourmokhtarian, A.; Dietze, M.

    2015-12-01

    Ecosystem models are essential tools in forecasting ecosystem responses to global climate change. One of the most challenging issues in ecosystem modeling is scaling while preserving landscape characteristics and minimizing loss of information, when moving from point observation to regional scale. There is a keen interest in providing accurate inputs for ecosystem models which represent ecosystem initial state conditions. Remote sensing land cover products, such as Landsat NLCD and MODIS MCD12Q1, provide extensive spatio-temporal coverage but do not capture forest composition and structure. Lidar and hyperspectral have the potential to meet this need but lack sufficient spatial and historical coverage. Forest inventory measurements provide detailed information on the landscape but in a very small footprint. Combining inventory and land cover could improve estimates of ecosystem state and characteristic across time and space. This study focuses on the challenges associated with fusing and scaling the US Forest Service FIA database and NLCD across regional scales to quantify ecosystem characteristics and reduce associated uncertainties. Across Southeast of U.S. 400 stratified random samples of 10x10 km2 landscapes were selected. Data on plant density, species, age, and DBH of trees in FIA plots within each site were extracted. Using allometry equations, the canopy cover of different plant functional types (PFTs) was estimated using a PPA-style canopy model and used to assign each inventory plot to a land cover class. Inventory and land cover were fused in a Bayesian model that adjusts the fractional coverage of inventory plots while accounting for multiple sources of uncertainty. Results were compared to estimates derived from inventory alone, land cover alone, and model spin-up alone. Our findings create a framework of data assimilation to better interpret remote sensing data using ground-based measurements.

  3. Wake losses from averaged and time-resolved power measurements at full scale wind turbines

    Science.gov (United States)

    Castellani, Francesco; Astolfi, Davide; Mana, Matteo; Becchetti, Matteo; Segalini, Antonio

    2017-05-01

    This work deals with the experimental analysis of wake losses fluctuations at full-scale wind turbines. The test case is a wind farm sited on a moderately complex terrain: 4 turbines are installed, having 2 MW of rated power each. The sources of information are the time-resolved data, as collected from the OPC server, and the 10-minutes averaged SCADA data. The objective is to compare the statistical distributions of wake losses for far and middle wakes, as can be observed through the “fast” lens of time-resolved data, for certain selected test-case time series, and through the “slow” lens of SCADA data, on a much longer time basis that allow to set the standards of the mean wake losses along the wind farm. Further, time-resolved data are used for an insight into the spectral properties of wake fluctuations, highlighting the role of the wind turbine as low-pass filter. Summarizing, the wind rose, the layout of the site and the structure of the data sets at disposal allow to study middle and far wake behavior, with a “slow” and “fast” perspective.

  4. Hawking evaporation time scale of topological black holes in anti-de Sitter spacetime

    Energy Technology Data Exchange (ETDEWEB)

    Ong, Yen Chin, E-mail: yenchin.ong@nordita.org

    2016-02-15

    It was recently pointed out that if an absorbing boundary condition is imposed at infinity, an asymptotically anti-de Sitter Schwarzschild black hole with a spherical horizon takes only a finite amount of time to evaporate away even if its initial mass is arbitrarily large. We show that this is a rather generic property in AdS spacetimes: regardless of their horizon topologies, neutral AdS black holes in general relativity take about the same amount of time to evaporate down to the same size of order L, the AdS length scale. Our discussion focuses on the case in which the black hole has toral event horizon. A brief comment is made on the hyperbolic case, i.e. for black holes with negatively curved horizons.

  5. Dependency structure and scaling properties of financial time series are related.

    Science.gov (United States)

    Morales, Raffaello; Di Matteo, T; Aste, Tomaso

    2014-04-04

    We report evidence of a deep interplay between cross-correlations hierarchical properties and multifractality of New York Stock Exchange daily stock returns. The degree of multifractality displayed by different stocks is found to be positively correlated to their depth in the hierarchy of cross-correlations. We propose a dynamical model that reproduces this observation along with an array of other empirical properties. The structure of this model is such that the hierarchical structure of heterogeneous risks plays a crucial role in the time evolution of the correlation matrix, providing an interpretation to the mechanism behind the interplay between cross-correlation and multifractality in financial markets, where the degree of multifractality of stocks is associated to their hierarchical positioning in the cross-correlation structure. Empirical observations reported in this paper present a new perspective towards the merging of univariate multi scaling and multivariate cross-correlation properties of financial time series.

  6. Multi-time scale energy management of wind farms based on comprehensive evaluation technology

    Science.gov (United States)

    Xu, Y. P.; Huang, Y. H.; Liu, Z. J.; Wang, Y. F.; Li, Z. Y.; Guo, L.

    2017-11-01

    A novel energy management of wind farms is proposed in this paper. Firstly, a novel comprehensive evaluation system is proposed to quantify economic properties of each wind farm to make the energy management more economical and reasonable. Then, a combination of multi time-scale schedule method is proposed to develop a novel energy management. The day-ahead schedule optimizes unit commitment of thermal power generators. The intraday schedule is established to optimize power generation plan for all thermal power generating units, hydroelectric generating sets and wind power plants. At last, the power generation plan can be timely revised in the process of on-line schedule. The paper concludes with simulations conducted on a real provincial integrated energy system in northeast China. Simulation results have validated the proposed model and corresponding solving algorithms.

  7. Time-Efficient Cloning Attacks Identification in Large-Scale RFID Systems

    Directory of Open Access Journals (Sweden)

    Ju-min Zhao

    2017-01-01

    Full Text Available Radio Frequency Identification (RFID is an emerging technology for electronic labeling of objects for the purpose of automatically identifying, categorizing, locating, and tracking the objects. But in their current form RFID systems are susceptible to cloning attacks that seriously threaten RFID applications but are hard to prevent. Existing protocols aimed at detecting whether there are cloning attacks in single-reader RFID systems. In this paper, we investigate the cloning attacks identification in the multireader scenario and first propose a time-efficient protocol, called the time-efficient Cloning Attacks Identification Protocol (CAIP to identify all cloned tags in multireaders RFID systems. We evaluate the performance of CAIP through extensive simulations. The results show that CAIP can identify all the cloned tags in large-scale RFID systems fairly fast with required accuracy.

  8. Measurements of Electron Transport in Foils Irradiated with a Picosecond Time Scale Laser Pulse

    International Nuclear Information System (INIS)

    Brown, C. R. D.; Hoarty, D. J.; James, S. F.; Swatton, D.; Hughes, S. J.; Morton, J. W.; Guymer, T. M.; Hill, M. P.; Chapman, D. A.; Andrew, J. E.; Comley, A. J.; Shepherd, R.; Dunn, J.; Chen, H.; Schneider, M.; Brown, G.; Beiersdorfer, P.; Emig, J.

    2011-01-01

    The heating of solid foils by a picosecond time scale laser pulse has been studied by using x-ray emission spectroscopy. The target material was plastic foil with a buried layer of a spectroscopic tracer material. The laser pulse length was either 0.5 or 2 ps, which resulted in a laser irradiance that varied over the range 10 16 -10 19 W/cm 2 . Time-resolved measurements of the buried layer emission spectra using an ultrafast x-ray streak camera were used to infer the density and temperature conditions as a function of laser parameters and depth of the buried layer. Comparison of the data to different models of electron transport showed that they are consistent with a model of electron transport that predicts the bulk of the target heating is due to return currents.

  9. Boreal Forests Sequester Large Amounts of Mercury over Millennial Time Scales in the Absence of Wildfire.

    Science.gov (United States)

    Giesler, Reiner; Clemmensen, Karina E; Wardle, David A; Klaminder, Jonatan; Bindler, Richard

    2017-03-07

    Alterations in fire activity due to climate change and fire suppression may have profound effects on the balance between storage and release of carbon (C) and associated volatile elements. Stored soil mercury (Hg) is known to volatilize due to wildfires and this could substantially affect the land-air exchange of Hg; conversely the absence of fires and human disturbance may increase the time period over which Hg is sequestered. Here we show for a wildfire chronosequence spanning over more than 5000 years in boreal forest in northern Sweden that belowground inventories of total Hg are strongly related to soil humus C accumulation (R 2 = 0.94, p millennial time scales in the prolonged absence of fire.

  10. Multi-Time Scale Control of Demand Flexibility in Smart Distribution Networks

    DEFF Research Database (Denmark)

    Bhattarai, Bishnu P.; Myers, Kurt S.; Bak-Jensen, Birgitte

    2017-01-01

    This paper presents a multi-timescale control strategy to deploy electric vehicle (EV) demand flexibility for simultaneously providing power balancing, grid congestion management, and economic benefits to participating actors. First, an EV charging problem is investigated from consumer, aggregator......-time adaptive control. The performance of the developed method is investigated with high EV penetration in a typical residential distribution grid. The simulation results demonstrate that HCA efficiently utilizes demand flexibility stemming from EVs to solve grid unbalancing and congestions with simultaneous......, and distribution system operator’s perspectives. A hierarchical control architecture (HCA) comprising scheduling, coordinative, and adaptive layers is then designed to realize their coordinative goal. This is realized by integrating multi-time scale controls that work from a day-ahead scheduling up to real...

  11. Impact of speculator's expectations of returns and time scales of investment on crude oil price behaviors

    International Nuclear Information System (INIS)

    He, Ling-Yun; Fan, Ying; Wei, Yi-Ming

    2009-01-01

    Based on time series of crude oil prices (daily spot), this paper analyses price fluctuation with two significant parameters τ (speculators' time scales of investment) and ε (speculators' expectations of return) by using Zipf analysis technique, specifically, by mapping τ-returns of prices into 3-alphabeted sequences (absolute frequencies) and 2-alphabeted sequences (relative frequencies), containing the fundamental information of price fluctuations. This paper empirically explores parameters and identifies various types of speculators' cognition patterns of price behavior. In order to quantify the degree of distortion, a feasible reference is proposed: an ideal speculator. Finally, this paper discusses the similarities and differences between those cognition patterns of speculators' and those of an ideal speculator. The resultant analyses identify the possible distortion of price behaviors by their patterns. (author)

  12. Short time scale variability of the BL Lacertae object OJ 287 in the near-infrared

    International Nuclear Information System (INIS)

    The results of a NIR photometric monitoring of the BL Lac object OJ 287 are presented. The standard JHK photometry shows variability of maximum amplitude of about 0.7 mag over the entire observing period of 23 months and about 0.3 mag on time intervals as short as about 3 hr. No spectral variability has been found. A fast monitoring performed in the H band, with a sampling period of about 4 min, provides evidence that variations can occur in this object on time scales of over 4 min and with an rms amplitude of 6-7 percent. These variations show slow increasing and fast decreasing trends, but no clear indication of periodicity is apparent. 30 refs

  13. Parallel Motion Simulation of Large-Scale Real-Time Crowd in a Hierarchical Environmental Model

    Directory of Open Access Journals (Sweden)

    Xin Wang

    2012-01-01

    Full Text Available This paper presents a parallel real-time crowd simulation method based on a hierarchical environmental model. A dynamical model of the complex environment should be constructed to simulate the state transition and propagation of individual motions. By modeling of a virtual environment where virtual crowds reside, we employ different parallel methods on a topological layer, a path layer and a perceptual layer. We propose a parallel motion path matching method based on the path layer and a parallel crowd simulation method based on the perceptual layer. The large-scale real-time crowd simulation becomes possible with these methods. Numerical experiments are carried out to demonstrate the methods and results.

  14. Multi-scale modeling of Earth's gravity field in space and time

    Science.gov (United States)

    Wang, Shuo; Panet, Isabelle; Ramillien, Guillaume; Guilloux, Frédéric

    2017-05-01

    Since 2002, the GRACE mission has been providing an unprecedented view of the Earth's gravity field spatial and temporal variations. The gravity field models built from these satellite data are essential in order to study the mass redistributions within the Earth system. Often, they are modelled using spatial functions, such as spherical harmonics, averaged over a fixed time window. However, the satellite sampling naturally leads to a trade-off between the achievable spatial and temporal resolutions. In addition, the gravity variations are made of local components in space and time, reflecting the superimposition of sources. With the final aim to better estimate gravity variations related to local processes at different spatial and temporal scales, and adapt the temporal resolution of the model to its spatial resolution, we present an attempt at 4D gravity field modelling using localized functions in space and time. For that, we develop a four-dimensional wavelet basis, well localized in space and time and orthogonal in time. We then analyze the inverse problem of 4D gravity field estimation from GRACE synthetic inter-satellites potential differences along the orbit, and its regularization in a Bayesian framework, using a prior knowledge on the mass sources. We then test our approach in a simplified synthetic test setting, where only one mass source is present: hydrological mass variations over Africa during the year 2005. Applying a purely regional approach, we are able to reconstruct, regionally, the water height signal with a ≈2.5 cm accuracy at 450 km, 21 days resolution. We test the influence of the geophysical prior on this result, and conclude that it cannot explain alone the residuals between original and reconstructed mass signal. redIn contrast, an ideal test case with a perfect adequacy between the 4D basis and the synthetic data, without approximations nor regularization in solving the normal system, leads to a significantly improved reconstruction of

  15. Cross-Cultural Scaling Studies in the Development of Probabilistic Teaching Performance Criteria Anchored to Utility and Time Scales.

    Science.gov (United States)

    Pfeiffer, Mark G.; And Others

    Previous cross-cultural scaling studies are incorporated into a training and performance model of the classroom teaching job of the college professor. The model, based on German and American data, describes and sets a norm for the improvement of classroom performance. Eight teaching performance factors and a set of seven continua (six predictors…

  16. Multi-scale visual analysis of time-varying electrocorticography data via clustering of brain regions.

    Science.gov (United States)

    Murugesan, Sugeerth; Bouchard, Kristofer; Chang, Edward; Dougherty, Max; Hamann, Bernd; Weber, Gunther H

    2017-06-06

    There exists a need for effective and easy-to-use software tools supporting the analysis of complex Electrocorticography (ECoG) data. Understanding how epileptic seizures develop or identifying diagnostic indicators for neurological diseases require the in-depth analysis of neural activity data from ECoG. Such data is multi-scale and is of high spatio-temporal resolution. Comprehensive analysis of this data should be supported by interactive visual analysis methods that allow a scientist to understand functional patterns at varying levels of granularity and comprehend its time-varying behavior. We introduce a novel multi-scale visual analysis system, ECoG ClusterFlow, for the detailed exploration of ECoG data. Our system detects and visualizes dynamic high-level structures, such as communities, derived from the time-varying connectivity network. The system supports two major views: 1) an overview summarizing the evolution of clusters over time and 2) an electrode view using hierarchical glyph-based design to visualize the propagation of clusters in their spatial, anatomical context. We present case studies that were performed in collaboration with neuroscientists and neurosurgeons using simulated and recorded epileptic seizure data to demonstrate our system's effectiveness. ECoG ClusterFlow supports the comparison of spatio-temporal patterns for specific time intervals and allows a user to utilize various clustering algorithms. Neuroscientists can identify the site of seizure genesis and its spatial progression during various the stages of a seizure. Our system serves as a fast and powerful means for the generation of preliminary hypotheses that can be used as a basis for subsequent application of rigorous statistical methods, with the ultimate goal being the clinical treatment of epileptogenic zones.

  17. Sensitivity of the simulated precipitation to changes in convective relaxation time scale

    Directory of Open Access Journals (Sweden)

    S. K. Mishra

    2010-10-01

    Full Text Available The paper describes the sensitivity of the simulated precipitation to changes in convective relaxation time scale (TAU of Zhang and McFarlane (ZM cumulus parameterization, in NCAR-Community Atmosphere Model version 3 (CAM3. In the default configuration of the model, the prescribed value of TAU, a characteristic time scale with which convective available potential energy (CAPE is removed at an exponential rate by convection, is assumed to be 1 h. However, some recent observational findings suggest that, it is larger by around one order of magnitude. In order to explore the sensitivity of the model simulation to TAU, two model frameworks have been used, namely, aqua-planet and actual-planet configurations. Numerical integrations have been carried out by using different values of TAU, and its effect on simulated precipitation has been analyzed. The aqua-planet simulations reveal that when TAU increases, rate of deep convective precipitation (DCP decreases and this leads to an accumulation of convective instability in the atmosphere. Consequently, the moisture content in the lower- and mid- troposphere increases. On the other hand, the shallow convective precipitation (SCP and large-scale precipitation (LSP intensify, predominantly the SCP, and thus capping the accumulation of convective instability in the atmosphere. The total precipitation (TP remains approximately constant, but the proportion of the three components changes significantly, which in turn alters the vertical distribution of total precipitation production. The vertical structure of moist heating changes from a vertically extended profile to a bottom heavy profile, with the increase of TAU. Altitude of the maximum vertical velocity shifts from upper troposphere to lower troposphere. Similar response was seen in the actual-planet simulations. With an increase in TAU from 1 h to 8 h, there was a significant improvement in the simulation of the seasonal mean precipitation. The fraction

  18. The time scale for the transition to turbulence in a high Reynolds number, accelerated flow

    International Nuclear Information System (INIS)

    Robey, H.F.; Zhou Ye; Buckingham, A.C.; Keiter, P.; Remington, B.A.; Drake, R.P.

    2003-01-01

    An experiment is described in which an interface between materials of different density is subjected to an acceleration history consisting of a strong shock followed by a period of deceleration. The resulting flow at this interface, initiated by the deposition of strong laser radiation into the initially well characterized solid materials, is unstable to both the Richtmyer-Meshkov (RM) and Rayleigh-Taylor (RT) instabilities. These experiments are of importance in their ability to access a difficult experimental regime characterized by very high energy density (high temperature and pressure) as well as large Reynolds number and Mach number. Such conditions are of interest, for example, in the study of the RM/RT induced mixing that occurs during the explosion of a core-collapse supernova. Under these experimental conditions, the flow is in the plasma state and given enough time will transition to turbulence. By analysis of the experimental data and a corresponding one-dimensional numerical simulation of the experiment, it is shown that the Reynolds number is sufficiently large (Re>10 5 ) to support a turbulent flow. An estimate of three key turbulence length scales (the Taylor and Kolmogorov microscales and a viscous diffusion scale), however, shows that the temporal duration of the present flow is insufficient to allow for the development of a turbulent inertial subrange. A methodology is described for estimating the time required under these conditions for the development of a fully turbulent flow

  19. Conflict-driven adaptive control is enhanced by integral negative emotion on a short time scale.

    Science.gov (United States)

    Yang, Qian; Pourtois, Gilles

    2018-02-05

    Negative emotion influences cognitive control, and more specifically conflict adaptation. However, discrepant results have often been reported in the literature. In this study, we broke down negative emotion into integral and incidental components using a modern motivation-based framework, and assessed whether the former could change conflict adaptation. In the first experiment, we manipulated the duration of the inter-trial-interval (ITI) to assess the actual time-scale of this effect. Integral negative emotion was induced by using loss-related feedback contingent on task performance, and measured at the subjective and physiological levels. Results showed that conflict-driven adaptive control was enhanced when integral negative emotion was elicited, compared to a control condition without changes in defensive motivation. Importantly, this effect was only found when a short, as opposed to long ITI was used, suggesting that it had a short time scale. In the second experiment, we controlled for effects of feature repetition and contingency learning, and replicated an enhanced conflict adaptation effect when integral negative emotion was elicited and a short ITI was used. We interpret these new results against a standard cognitive control framework assuming that integral negative emotion amplifies specific control signals transiently, and in turn enhances conflict adaptation.

  20. Nonlinear multidimensional scaling and visualization of earthquake clusters over space, time and feature space

    Directory of Open Access Journals (Sweden)

    W. Dzwinel

    2005-01-01

    Full Text Available We present a novel technique based on a multi-resolutional clustering and nonlinear multi-dimensional scaling of earthquake patterns to investigate observed and synthetic seismic catalogs. The observed data represent seismic activities around the Japanese islands during 1997-2003. The synthetic data were generated by numerical simulations for various cases of a heterogeneous fault governed by 3-D elastic dislocation and power-law creep. At the highest resolution, we analyze the local cluster structures in the data space of seismic events for the two types of catalogs by using an agglomerative clustering algorithm. We demonstrate that small magnitude events produce local spatio-temporal patches delineating neighboring large events. Seismic events, quantized in space and time, generate the multi-dimensional feature space characterized by the earthquake parameters. Using a non-hierarchical clustering algorithm and nonlinear multi-dimensional scaling, we explore the multitudinous earthquakes by real-time 3-D visualization and inspection of the multivariate clusters. At the spatial resolutions characteristic of the earthquake parameters, all of the ongoing seismicity both before and after the largest events accumulates to a global structure consisting of a few separate clusters in the feature space. We show that by combining the results of clustering in both low and high resolution spaces, we can recognize precursory events more precisely and unravel vital information that cannot be discerned at a single resolution.

  1. Recognizing Axionic Dark Matter by Compton and de Broglie Scale Modulation of Pulsar Timing.

    Science.gov (United States)

    De Martino, Ivan; Broadhurst, Tom; Tye, S-H Henry; Chiueh, Tzihong; Schive, Hsi-Yu; Lazkoz, Ruth

    2017-12-01

    Light axionic dark matter, motivated by string theory, is increasingly favored for the "no weakly interacting massive particle era". Galaxy formation is suppressed below a Jeans scale of ≃10^{8}  M_{⊙} by setting the axion mass to m_{B}∼10^{-22}  eV, and the large dark cores of dwarf galaxies are explained as solitons on the de Broglie scale. This is persuasive, but detection of the inherent scalar field oscillation at the Compton frequency ω_{B}=(2.5  months)^{-1}(m_{B}/10^{-22}  eV) would be definitive. By evolving the coupled Schrödinger-Poisson equation for a Bose-Einstein condensate, we predict the dark matter is fully modulated by de Broglie interference, with a dense soliton core of size ≃150  pc, at the Galactic center. The oscillating field pressure induces general relativistic time dilation in proportion to the local dark matter density and pulsars within this dense core have detectably large timing residuals of ≃400  nsec/(m_{B}/10^{-22}  eV). This is encouraging as many new pulsars should be discovered near the Galactic center with planned radio surveys. More generally, over the whole Galaxy, differences in dark matter density between pairs of pulsars imprints a pairwise Galactocentric signature that can be distinguished from an isotropic gravitational wave background.

  2. Interactive exploration of large-scale time-varying data using dynamic tracking graphs

    KAUST Repository

    Widanagamaachchi, W.

    2012-10-01

    Exploring and analyzing the temporal evolution of features in large-scale time-varying datasets is a common problem in many areas of science and engineering. One natural representation of such data is tracking graphs, i.e., constrained graph layouts that use one spatial dimension to indicate time and show the "tracks" of each feature as it evolves, merges or disappears. However, for practical data sets creating the corresponding optimal graph layouts that minimize the number of intersections can take hours to compute with existing techniques. Furthermore, the resulting graphs are often unmanageably large and complex even with an ideal layout. Finally, due to the cost of the layout, changing the feature definition, e.g. by changing an iso-value, or analyzing properly adjusted sub-graphs is infeasible. To address these challenges, this paper presents a new framework that couples hierarchical feature definitions with progressive graph layout algorithms to provide an interactive exploration of dynamically constructed tracking graphs. Our system enables users to change feature definitions on-the-fly and filter features using arbitrary attributes while providing an interactive view of the resulting tracking graphs. Furthermore, the graph display is integrated into a linked view system that provides a traditional 3D view of the current set of features and allows a cross-linked selection to enable a fully flexible spatio-temporal exploration of data. We demonstrate the utility of our approach with several large-scale scientific simulations from combustion science. © 2012 IEEE.

  3. Characterization of Microbial Fuel Cells at Microbially and Electrochemically Meaningful Time scales

    KAUST Repository

    Ren, Zhiyong

    2011-03-15

    The variable biocatalyst density in a microbial fuel cell (MFC) anode biofilm is a unique feature of MFCs relative to other electrochemical systems, yet performance characterizations of MFCs typically involve analyses at electrochemically relevant time scales that are insufficient to account for these variable biocatalyst effects. This study investigated the electrochemical performance and the development of anode biofilm architecture under different external loadings, with duplicate acetate-fed singlechamber MFCs stabilized at each resistance for microbially relevant time scales. Power density curves from these steady-state reactors generally showed comparable profiles despite the fact that anode biofilm architectures and communities varied considerably, showing that steady-state biofilm differences had little influence on electrochemical performance until the steady-state external loading was much larger than the reactor internal resistance. Filamentous bacteria were dominant on the anodes under high external resistances (1000 and 5000 Ω), while more diverse rod-shaped cells formed dense biofilms under lower resistances (10, 50, and 265 Ω). Anode charge transfer resistance decreased with decreasing fixed external resistances, but was consistently 2 orders of magnitude higher than the resistance at the cathode. Cell counting showed an inverse exponential correlation between cell numbers and external resistances. This direct link ofMFCanode biofilm evolution with external resistance and electricity production offers several operational strategies for system optimization. © 2011 American Chemical Society.

  4. Towards a Millennial Time-scale Vertical Deformation Field in Taiwan

    Science.gov (United States)

    Bordovaos, P. A.; Johnson, K. M.

    2015-12-01

    Pete Bordovalos and Kaj M. Johnson To better understand the feedbacks between erosion and deformation in Taiwan, we need constraints on the millennial time-scale vertical field. Dense GPS and leveling data sets in Taiwan provide measurements of the present-day vertical deformation field over the entire Taiwan island. However, it is unclear how much of this vertical field is transient (varies over earthquake cycle) or steady (over millennial time scale). A deformation model is required to decouple transient from steady deformation. This study takes a look at how the 82 mm/yr of convergence motion between the Eurasian plate and the Philippine Sea plate is distributed across the faults on Taiwan. We build a plate flexure model that consists of all known active faults and subduction zones cutting through an elastic plate supported by buoyancy. We use horizontal and vertical GPS data, leveling data, and geologic surface uplift rates with a Monte Carlo probabilistic inversion method to infer fault slip rates and locking depths on all faults. Using our model we examine how different fault geometries influence the estimates of distribution of slip along faults and deformation patterns.

  5. Spatial analysis of aquifer response times for radial flow processes: Nondimensional analysis and laboratory-scale tests

    Science.gov (United States)

    Jazaei, Farhad; Simpson, Matthew J.; Clement, T. Prabhakar

    2016-01-01

    A fundamental concept in groundwater hydrology is the notion of steady state, or equilibrium conditions. When a system at some initial steady state condition is perturbed by pumping, a transient cone of depression will develop and the system will approach a new steady state condition. Understanding the time scale required for the transient process to occur is of practical interest since it would help practitioners decide whether to use a steady state model or a more complicated transient model. Standard approaches to estimate the response time use simple scaling relationships which neglect spatial variations. Alternatively, others define the response time to be the amount of time taken for the difference between the transient and steady state solutions to fall below some arbitrary tolerance level. Here, we present a novel approach and use the concept of mean action time to predict aquifer response time scales in a two-dimensional radial geometry for pumping, injection and recovery processes. Our approach leads to relatively simple closed form expressions that explicitly show how the time scale depends on the hydraulic parameters and position. Furthermore, our dimensionless framework allows us to predict the response time scales for a range of applications including small scale laboratory problems and large scale field problems. Our analysis shows that the response time scales vary spatially, but are equivalent for pumping, injection and associated recovery processes. Furthermore, the time scale is independent of the pumping or injection flow rate. We test these predictions in a laboratory scale aquifer and find that our physical measurements corroborate the theoretical predictions.

  6. Using time scales to characterize phytoplankton assemblages in a deep subalpine lake during the thermal stratification period: Lake Iseo, Italy

    Science.gov (United States)

    Marti, Clelia Luisa; Imberger, Jörg; Garibaldi, Letizia; Leoni, Barbara

    2016-03-01

    A combination of field observations and 3-D hydrodynamic simulations were used to identify the phytoplankton species and to estimate the various time scales of the dominant physical and biological processes in Lake Iseo, a deep subalpine lake located in northern Italy, during a stratified period (July 2010). By ordering the rate processes time scales, we derive a phytoplankton patch categorization and growth interpretation that provides a general framework for the spatial distribution of phytoplankton concentration in Lake Iseo and illuminates the characteristics of their ecological niches. The results show that the diurnal surface layer was well mixed, received strong diurnal radiation, had low phosphorus concentrations and the phytoplankton biomass was sustained by the green alga Sphaerocystis schroeterii. The vertical mixing time scales were much shorter than horizontal mixing time scales causing a depth-uniform chlorophyll a concentration. The horizontal patch scale was determined by horizontal dispersion balancing the phytoplankton growth time scale, dictating the success of the observed green algae. The strongly stratified nutrient-rich metalimnion had mild light conditions and Diatoma elongatum and Planktothrix rubescens made up the largest proportions of the total phytoplankton biomass at the intermediate and deeper metalimnetic layers. The vertical transport time scales were much shorter than horizontal transport and vertical dispersion leading to growth niche for the observed phytoplankton. The study showed that time-scale hierarchy mandates the essential phytoplankton attributes or traits for success in a particular section of the water column and/or water body.

  7. Scales of Time Where the Quantum Discord Allows an Efficient Execution of the DQC1 Algorithm

    Directory of Open Access Journals (Sweden)

    M. Ávila

    2014-01-01

    Full Text Available The power of one qubit deterministic quantum processor (DQC1 (Knill and Laflamme (1998 generates a nonclassical correlation known as quantum discord. The DQC1 algorithm executes in an efficient way with a characteristic time given by τ=Tr[Un]/2n, where Un is an n qubit unitary gate. For pure states, quantum discord means entanglement while for mixed states such a quantity is more than entanglement. Quantum discord can be thought of as the mutual information between two systems. Within the quantum discord approach the role of time in an efficient evaluation of τ is discussed. It is found that the smaller the value of t/T is, where t is the time of execution of the DQC1 algorithm and T is the scale of time where the nonclassical correlations prevail, the more efficient the calculation of τ is. A Mösbauer nucleus might be a good processor of the DQC1 algorithm while a nuclear spin chain would not be efficient for the calculation of τ.

  8. A continuous time random walk model for Darcy-scale anomalous transport in heterogeneous porous media.

    Science.gov (United States)

    Comolli, Alessandro; Hakoun, Vivien; Dentz, Marco

    2017-04-01

    Achieving the understanding of the process of solute transport in heterogeneous porous media is of crucial importance for several environmental and social purposes, ranging from aquifers contamination and remediation, to risk assessment in nuclear waste repositories. The complexity of this aim is mainly ascribable to the heterogeneity of natural media, which can be observed at all the scales of interest, from pore scale to catchment scale. In fact, the intrinsic heterogeneity of porous media is responsible for the arising of the well-known non-Fickian footprints of transport, including heavy-tailed breakthrough curves, non-Gaussian spatial density profiles and the non-linear growth of the mean squared displacement. Several studies investigated the processes through which heterogeneity impacts the transport properties, which include local modifications to the advective-dispersive motion of solutes, mass exchanges between some mobile and immobile phases (e.g. sorption/desorption reactions or diffusion into solid matrix) and spatial correlation of the flow field. In the last decades, the continuous time random walk (CTRW) model has often been used to describe solute transport in heterogenous conditions and to quantify the impact of point heterogeneity, spatial correlation and mass transfer on the average transport properties [1]. Open issues regarding this approach are the possibility to relate measurable properties of the medium to the parameters of the model, as well as its capability to provide predictive information. In a recent work [2] the authors have shed new light on understanding the relationship between Lagrangian and Eulerian dynamics as well as on their evolution from arbitrary initial conditions. On the basis of these results, we derive a CTRW model for the description of Darcy-scale transport in d-dimensional media characterized by spatially random permeability fields. The CTRW approach models particle velocities as a spatial Markov process, which is

  9. Impacts of Land Use on Wetland Vegetation in the Eastern United States: Timing and Scale

    Science.gov (United States)

    Bernhardt, C. E.; Willard, D. A.; Townsend, P.; Brown, R.

    2004-12-01

    The timing and scale of vegetation change are dependent on the resilience of the ecosystem to land use change that alters hydrologic response and sediment transport. Using palynological methods, we examine the impacts of land use change in 2 distinct ecosystems (the subtropical Florida Everglades and the temperate Roanoke River floodplain) in the Eastern United States. Twentieth century water management strategies have modified the hydrology within the Florida Everglades resulting in varying degrees of vegetation changes depending on community type and location within the greater Everglades ecosystem. Analysis of pollen assemblages from herbaceous wetland communities such as sawgrass ridges, open water sloughs, and marl prairies, show rapid vegetation change in response to both increases and decreases in hydrology. However, evaluations of these wetland environments over longer time periods (centuries to millennia) and through natural alterations to hydroperiod (like Medieval Warm Period) demonstrated the ability of the vegetation to recover within a few decades. Tree-island communities, composed of flood-intolerant, woody vegetation, are largely resistant to decreases in hydroperiod. They are, however, less tolerant to sustained increases (greater than 5 years) in water levels, with no seasonal drying, resulting in long-term degradation. Tree-island pollen assemblages indicate rapid changes in vegetation composition when subjected to prolonged hydroperiod (essentially drowning the tree islands). Pollen assemblages from the Roanoke River floodplain provide a perspective on the impacts of colonial land clearance, altered sedimentation, and changes in flooding regimes on forested wetland vegetation. After land clearance, organic to mineral sediments covered organic floodplain soils. Palynological evidence suggests a change towards less flood tolerant communities in areas of greatest sedimentation. These results demonstrate the rapid response of wetland plant

  10. Theta-frequency resonance at the cerebellum input stage improves spike-timing on the millisecond time-scale

    Directory of Open Access Journals (Sweden)

    Daniela eGandolfi

    2013-04-01

    Full Text Available The neuronal circuits of the brain are thought to use resonance and oscillations to improve communication over specific frequency bands (Llinas, 1988; Buzsaki, 2006. However, the properties and mechanism of these phenomena in brain circuits remain largely unknown. Here we show that, at the cerebellum input stage, the granular layer generates its maximum response at 5-7 Hz both in vivo following tactile sensory stimulation of the whisker pad and in acute slices following mossy fiber-bundle stimulation. The spatial analysis of granular layer activity performed using voltage-sensitive dye (VSD imaging revealed 5-7 Hz resonance covering large granular layer areas. In single granule cells, resonance appeared as a reorganization of output spike bursts on the millisecond time-scale, such that the first spike occurred earlier and with higher temporal precision and the probability of spike generation increased. Resonance was independent from circuit inhibition, as it persisted with little variation in the presence of the GABAA receptor blocker, gabazine. However, circuit inhibition reduced the resonance area more markedly at 7 Hz. Simulations with detailed computational models suggested that resonance depended on intrinsic granule cells ionic mechanisms: specifically, Kslow (M-like and KA currents acted as resonators and the persistent Na current and NMDA current acted as amplifiers. This form of resonance may play an important role for enhancing coherent spike emission from the granular layer when theta-frequency bursts are transmitted by the cerebral cortex and peripheral sensory structures during sensory-motor processing, cognition and learning.

  11. Empirical behavior of a world stock index from intra-day to monthly time scales

    Science.gov (United States)

    Breymann, W.; Lüthi, D. R.; Platen, E.

    2009-10-01

    Most of the papers that study the distributional and fractal properties of financial instruments focus on stock prices or foreign exchange rates. This typically leads to mixed results concerning the distributions of log-returns and some multi-fractal properties of exchange rates, stock prices, and regional indices. This paper uses a well diversified world stock index as the central object of analysis. Such index approximates the growth optimal portfolio, which is demonstrated under the benchmark approach, it is the ideal reference unit for studying basic securities. When denominating this world index in units of a given currency, one measures the movements of the currency against the entire market. This provides a least disturbed observation of the currency dynamics. In this manner, one can expect to disentangle, e.g., the superposition of the two currencies involved in an exchange rate. This benchmark approach to the empirical analysis of financial data allows us to establish remarkable stylized facts. Most important is the observation that the repeatedly documented multi-fractal appearance of financial time series is very weak and much less pronounced than the deviation of the mono-scaling properties from Brownian-motion type scaling. The generalized Hurst exponent H(2) assumes typical values between 0.55 and 0.6. Accordingly, autocorrelations of log-returns decay according to a power law, and the quadratic variation vanishes when going to vanishing observation time step size. Furthermore, one can identify the Student t distribution as the log-return distribution of a well-diversified world stock index for long time horizons when a long enough data series is used for estimation. The study of dependence properties, finally, reveals that jumps at daily horizon originate primarily in the stock market while at 5min horizon they originate in the foreign exchange market. The principal message of the empirical analysis is that there is evidence that a diffusion model

  12. TRIM15 is a focal adhesion protein that regulates focal adhesion disassembly

    Science.gov (United States)

    Uchil, Pradeep D.; Pawliczek, Tobias; Reynolds, Tracy D.; Ding, Siyuan; Hinz, Angelika; Munro, James B.; Huang, Fang; Floyd, Robert W.; Yang, Haitao; Hamilton, William L.; Bewersdorf, Joerg; Xiong, Yong; Calderwood, David A.; Mothes, Walther

    2014-01-01

    ABSTRACT Focal adhesions are macromolecular complexes that connect the actin cytoskeleton to the extracellular matrix. Dynamic turnover of focal adhesions is crucial for cell migration. Paxillin is a multi-adaptor protein that plays an important role in regulating focal adhesion dynamics. Here, we identify TRIM15, a member of the tripartite motif protein family, as a paxillin-interacting factor and a component of focal adhesions. TRIM15 localizes to focal contacts in a myosin-II-independent manner by an interaction between its coiled-coil domain and the LD2 motif of paxillin. Unlike other focal adhesion proteins, TRIM15 is a stable focal adhesion component with restricted mobility due to its ability to form oligomers. TRIM15-depleted cells display impaired cell migration and reduced focal adhesion disassembly rates, in addition to enlarged focal adhesions. Thus, our studies demonstrate a cellular function for TRIM15 as a regulatory component of focal adhesion turnover and cell migration. PMID:25015296

  13. Cofilin phosphorylation is elevated after F-actin disassembly induced by Rac1 depletion

    DEFF Research Database (Denmark)

    Liu, Linna; Li, Jing; Zhang, Liwang

    2015-01-01

    Cytoskeletal reorganization is essential to keratinocyte function. Rac1 regulates cytoskeletal reorganization through signaling pathways such as the cofilin cascade. Cofilin severs actin filaments after activation by dephosphorylation. Rac1 was knocked out in mouse keratinocytes and it was found...... that actin filaments disassembled. In the epidermis of mice in which Rac1 was knocked out only in keratinocytes, cofilin phosphorylation was aberrantly elevated, corresponding to repression of the phosphatase slingshot1 (SSH1). These effects were independent of the signaling pathways for p21-activated kinase....../LIM kinase (Pak/LIMK), protein kinase C, or protein kinase D or generation of reactive oxygen species. Similarly, when actin polymerization was specifically inhibited or Rac1 was knocked down, cofilin phosphorylation was enhanced and SSH1 was repressed. Repression of SSH1 partially blocked actin...

  14. Chain Assembly and Disassembly Processes Differently Affect the Conformational Space of Ubiquitin Chains.

    Science.gov (United States)

    Kniss, Andreas; Schuetz, Denise; Kazemi, Sina; Pluska, Lukas; Spindler, Philipp E; Rogov, Vladimir V; Husnjak, Koraljka; Dikic, Ivan; Güntert, Peter; Sommer, Thomas; Prisner, Thomas F; Dötsch, Volker

    2018-02-06

    Ubiquitination is the most versatile posttranslational modification. The information is encoded by linkage type as well as chain length, which are translated by ubiquitin binding domains into specific signaling events. Chain topology determines the conformational space of a ubiquitin chain and adds an additional regulatory layer to this ubiquitin code. In particular, processes that modify chain length will be affected by chain conformations as they require access to the elongation or cleavage sites. We investigated conformational distributions in the context of chain elongation and disassembly using pulsed electron-electron double resonance spectroscopy in combination with molecular modeling. Analysis of the conformational space of diubiquitin revealed conformational selection or remodeling as mechanisms for chain recognition during elongation or hydrolysis, respectively. Chain elongation to tetraubiquitin increases the sampled conformational space, suggesting that a high intrinsic flexibility of K48-linked chains may contribute to efficient proteasomal degradation. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Surplus weapons plutonium: Technologies for pit disassembly/conversion and MOX fuel fabrication

    International Nuclear Information System (INIS)

    Toevs, J.W.

    1997-01-01

    This paper will provide a description of the technologies involved in the disposition of plutonium from surplus nuclear weapon components (pits), based on pit disassembly and conversion and on fabrication of mixed oxide (MOX) fuel for disposition through irradiation in nuclear reactors. The MOX/Reactor option is the baseline disposition plan for both the US and russian for plutonium from pits and other clean plutonium metal and oxide. In the US, impure plutonium in various forms will be converted to oxide and immobilized in glass or ceramic, surrounded by vitrified high level waste to provide a radiation barrier. A similar fate is expected for impure material in Russia as well. The immobilization technologies will not be discussed. Following technical descriptions, a discussion of options for monitoring the plutonium during these processes will be provided

  16. Electrostatic assembly/disassembly of nanoscaled colloidosomes for light-triggered cargo release

    KAUST Repository

    Li, Song

    2015-04-27

    Colloidosome capsules possess the potential for the encapsulation and release of molecular and macromolecular cargos. However, the stabilization of the colloidosome shell usually requires an additional covalent crosslinking which irreversibly seals the capsules, and greatly limits their applications in large-cargos release. Herein we report nanoscaled colloidosomes designed by the electrostatic assembly of organosilica nanoparticles (NPs) with oppositely charged surfaces (rather than covalent bonds), arising from different contents of a bridged nitrophenylene-alkoxysilane [NB; 3-nitro-N-(3-(triethoxysilyl)propyl)-4-(((3-(triethoxysilyl)propyl)-amino)methyl)benzamid] derivative in the silica. The surface charge of the positively charged NPs was reversed by light irradiation because of a photoreaction in the NB moieties, which impacted the electrostatic interactions between NPs and disassembled the colloidosome nanosystems. This design was successfully applied for the encapsulation and light-triggered release of cargos. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Assembling and disassembling Ag clusters on Si(111)-(7×7) by vertical atomic manipulation.

    Science.gov (United States)

    Ming, Fangfei; Wang, Kedong; Pan, Shuan; Liu, Jiepeng; Zhang, Xieqiu; Yang, Jinlong; Xiao, Xudong

    2011-09-27

    Atomic manipulation has been rarely used in the studies of complex structures and a low temperature requirement usually limits its application. Herein we have demonstrated a vertical manipulation technique to reproducibly and reversibly manipulating Ag atoms on an Si(111)-(7×7) surface by a scanning tunneling microscope tip at room temperature. Simple and complex Ag nanoclusters were assembled and disassembled with a precise control of single Ag atoms, which provided critical information on the size of these nanoclusters. The manipulation showed the growth processes of these Ag clusters and even partly unveiled their atomic structures. This technique can form a fundamental basis for further studies of the Ag/Si(111)-(7×7) system and for fabricating functional nanodevices in various metal-semiconductor systems. © 2011 American Chemical Society

  18. QIL1 mutation causes MICOS disassembly and early onset fatal mitochondrial encephalopathy with liver disease.

    Science.gov (United States)

    Guarani, Virginia; Jardel, Claude; Chrétien, Dominique; Lombès, Anne; Bénit, Paule; Labasse, Clémence; Lacène, Emmanuelle; Bourillon, Agnès; Imbard, Apolline; Benoist, Jean-François; Dorboz, Imen; Gilleron, Mylène; Goetzman, Eric S; Gaignard, Pauline; Slama, Abdelhamid; Elmaleh-Bergès, Monique; Romero, Norma B; Rustin, Pierre; Ogier de Baulny, Hélène; Paulo, Joao A; Harper, J Wade; Schiff, Manuel

    2016-09-13

    Previously, we identified QIL1 as a subunit of mitochondrial contact site (MICOS) complex and demonstrated a role for QIL1 in MICOS assembly, mitochondrial respiration, and cristae formation critical for mitochondrial architecture (Guarani et al., 2015). Here, we identify QIL1 null alleles in two siblings displaying multiple clinical symptoms of early-onset fatal mitochondrial encephalopathy with liver disease, including defects in respiratory chain function in patient muscle. QIL1 absence in patients' fibroblasts was associated with MICOS disassembly, abnormal cristae, mild cytochrome c oxidase defect, and sensitivity to glucose withdrawal. QIL1 expression rescued cristae defects, and promoted re-accumulation of MICOS subunits to facilitate MICOS assembly. MICOS assembly and cristae morphology were not efficiently rescued by over-expression of other MICOS subunits in patient fibroblasts. Taken together, these data provide the first evidence of altered MICOS assembly linked with a human mitochondrial disease and confirm a central role for QIL1 in stable MICOS complex formation.

  19. What North America's skeleton crew of megafauna tells us about community disassembly.

    Science.gov (United States)

    Davis, Matt

    2017-01-11

    Functional trait diversity is increasingly used to model future changes in community structure despite a poor understanding of community disassembly's effects on functional diversity. By tracking the functional diversity of the North American large mammal fauna through the End-Pleistocene megafaunal extinction and up to the present, I show that contrary to expectations, functionally unique species are no more likely to go extinct than functionally redundant species. This makes total functional richness loss no worse than expected given similar taxonomic richness declines. However, where current species sit in functional space relative to pre-anthropogenic baselines is not random and likely explains ecosystem functional changes better than total functional richness declines. Prehistoric extinctions have left many extant species functionally isolated and future extinctions will cause even more rapid drops in functional richness. © 2017 The Author(s).

  20. A hypothesis linking chrysophyte microfossils to lake carbon dynamics on ecological and evolutionary time scales

    Science.gov (United States)

    Wolfe, Alexander P.; Siver, Peter A.

    2013-12-01

    Chrysophyte algae are common in the plankton of oligotrophic lakes and produce a rich microfossil record of siliceous cysts and scales. Paleolimnological investigations and phytoplankton records suggest that chrysophyte populations are increasing in a wide range of boreal and arctic lakes, ultimately representing one component of the limnological response to contemporary global changes. However, the exact mechanisms responsible for widespread increases of chrysophyte populations remain elusive. We hypothesize that recent increases in chrysophytes are related to rising pCO2 in lakes, in part because these algae lack carbon concentrating mechanisms and therefore rely on diffusive entry of CO2 to Rubisco during photosynthesis. We assessed the abundance of modern sediment chrysophyte microfossils in relation to summer CO2 relative saturation in 46 New England (USA) lakes, revealing significant positive relationships for both cysts and scales. These observations imply that correlations between chrysophytes and limnological conditions including low pH, oligotrophy, and elevated dissolved organic matter are ultimately underscored by the high pCO2 associated with these conditions. In lakes where chrysophyte populations have expanded over recent decades, we infer that increasingly heterotrophic conditions with respect to CO2 have stimulated production by these organisms. This linkage is supported by the remarkable abundance and diversity of chrysophytes from middle Eocene lake sediments, deposited under atmospheric CO2 concentrations significantly higher than present. The Eocene assemblages suggest that any chrysophyte-CO2 connection borne out of results from modern and sub-recent sediments also operated on evolutionary time scales, and thus the absence of carbon concentrating mechanisms appears to be an ancient feature within the group. Chrysophyte microfossils may potentially provide important insights concerning the temporal dynamics of carbon cycling in aquatic

  1. Modeling of GIC Impacts in Different Time Scales, and Validation with Measurement Data

    Science.gov (United States)

    Shetye, K.; Birchfield, A.; Overbye, T. J.; Gannon, J. L.

    2016-12-01

    Geomagnetically induced currents (GICs) have mostly been associated with geomagnetic disturbances (GMDs) originating from natural events such as solar coronal mass ejections. There is another, man-made, phenomenon that can induce GICs in the bulk power grid. Detonation of nuclear devices at high altitudes can give rise to electromagnetic pulses (EMPs) that induce electric fields at the earth's surface. EMPs cause three types of waves on different time scales, the slowest of which, E3, can induce GICs similar to the way GMDs do. The key difference between GMDs and EMPs is the rise time of the associated electric field. E3 electric fields are in the msec. to sec. range, whereas GMD electric fields are slower (sec. to min.). Similarly, the power grid and its components also operate and respond to disturbances in various time frames, right from electromagnetic transients (eg. lightning propagation) in the micro second range to steady state power flow ( hours). Hence, different power system component models need to be used to analyze the impacts of GICs caused by GMDs, and EMPs. For instance, for the slower GMD based GICs, a steady-state (static) analysis of the system is sufficient. That is, one does not need to model the dynamic components of a power system, such as the rotating machine of a generator, or generator controls such as exciters, etc. The latter become important in the case of an E3 EMP wave, which falls in the power system transient stability time frame of msec. to sec. This talk will first give an overview of the different time scales and models associated with power system operations, and where GMD and EMPs fit in. This is helpful to develop appropriate system models and test systems for analyzing impacts of GICs from various sources, and developing mitigation measures. Example test systems developed for GMD and EMP analysis, and their key modeling and analysis differences will be presented. After the modeling is discussed, results of validating

  2. Permo-Triassic anatexis, continental rifting and the disassembly of western Pangaea

    Science.gov (United States)

    Cochrane, Ryan; Spikings, Richard; Gerdes, Axel; Ulianov, Alexey; Mora, Andres; Villagómez, Diego; Putlitz, Benita; Chiaradia, Massimo

    2014-03-01

    Crustal anatectites are frequently observed along ocean-continent active margins, although their origins are disputed with interpretations varying between rift-related and collisional. We report geochemical, isotopic and geochronological data that define an ~ 1500 km long belt of S-type meta-granites along the Andes of Colombia and Ecuador, which formed during 275-223 Ma. These are accompanied by amphibolitized tholeiitic basaltic dykes that yield concordant zircon U-Pb dates ranging between 240 and 223 Ma. A model is presented which places these rocks within a compressive Permian arc setting that existed during the amalgamation of westernmost Pangaea. Anatexis and mafic intrusion during 240-223 Ma are interpreted to have occurred during continental rifting, which culminated in the formation of oceanic crust and initiated the break-up of western Pangaea. Compression during 275-240 Ma generated small volumes of crustal melting. Rifting during 240-225 Ma was characterized by basaltic underplating, the intrusion of tholeiitic basalts and a peak in crustal melting. Tholeiitic intrusions during 225-216 Ma isotopically resemble depleted mantle and yield no evidence for contamination by continental crust, and we assign this period to the onset of continental drift. Dissected ophiolitic sequences in northern Colombia yield zircon U-Pb dates of 216 Ma. The Permo-Triassic margin of Ecuador and Colombia exhibits close temporal, faunal and geochemical similarities with various crustal blocks that form the basement to parts of Mexico, and thus these may represent the relict conjugate margin to NW Gondwana. The magmatic record of the early disassembly of Pangaea spans ~ 20 Ma (240-216 Ma), and the duration of rifting and rift-drift transition is similar to that documented in Cretaceous-Tertiary rift settings such as the West Iberia-Newfoundland conjugate margins, and the Taupo-Lau-Havre System, where rifting and continental disassembly also occurred over periods lasting ~ 20 Ma.

  3. Time-resolved Sensing of Meso-scale Shock Compression with Multilayer Photonic Crystal Structures

    Science.gov (United States)

    Scripka, David; Lee, Gyuhyon; Summers, Christopher J.; Thadhani, Naresh

    2017-06-01

    Multilayer Photonic Crystal structures can provide spatially and temporally resolved data needed to validate theoretical and computational models relevant for understanding shock compression in heterogeneous materials. Two classes of 1-D photonic crystal multilayer structures were studied: optical microcavities (OMC) and distributed Bragg reflectors (DBR). These 0.5 to 5 micron thick structures were composed of SiO2, Al2O3, Ag, and PMMA layers fabricated primarily via e-beam evaporation. The multilayers have unique spectral signatures inherently linked to their time-resolved physical states. By observing shock-induced changes in these signatures, an optically-based pressure sensor was developed. Results to date indicate that both OMCs and DBRs exhibit nanosecond-resolved spectral shifts of several to 10s of nanometers under laser-driven shock compression loads of 0-10 GPa, with the magnitude of the shift strongly correlating to the shock load magnitude. Additionally, spatially and temporally resolved spectral shifts under heterogeneous laser-driven shock compression created by partial beam blocking have been successfully demonstrated. These results illustrate the potential for multilayer structures to serve as meso-scale sensors, capturing temporal and spatial pressure profile evolutions in shock-compressed heterogeneous materials, and revealing meso-scale pressure distributions across a shocked surface. Supported by DTRA Grant HDTRA1-12-1-005 and DoD, AFOSR, National Defense Science and Eng. Graduate Fellowship, 32 CFR 168a.

  4. Atmospheric CO2 variations on orbital time scale during the Paleocene and Eocene

    Science.gov (United States)

    Zeebe, R. E.; Westerhold, T.; Littler, K.; Zachos, J. C.

    2016-12-01

    Multi-million-year proxy records (d13C, d18O, %CaCO3, Fe, etc.) show prominent variations on orbital time scale during the Paleocene and Eocene. The cycles have been identified at various sites across the globe and preferentially concentrate spectral power at eccentricity and precessional frequencies. It is almost certain that these cycles are an expression of changes in global climate and carbon cycling paced by orbital variations. However, little is currently known about (1) the driving mechanism linking orbital forcing to changes in climate and carbon cycling and (2) the amplitude of atmospheric CO2 variations associated with these cycles. We have used simple and complex carbon cycle models to explore the basic effect of different orbital forcing schemes and noise on the carbon cycle by forcing different carbon cycle parameters. For direct insolation forcing (opposed to eccentricity - tilt - precession), one major challenge is understanding how the system transfers spectral power from high to low frequencies. We will discuss feasible solutions to this problem, including insolation transformations analogous to electronic AC-DC conversion (DC'ing). Our results show that high-latitude mechanisms are unlikely drivers of orbitally paced changes in the Paleocene-Eocene Earth system. Based on a synthesis of modeling and proxy data analysis, we present the first estimates of orbital-scale variations in atmospheric CO2 during the Paleocene and Eocene.

  5. Relationship between fine-mode AOD and precipitation on seasonal and interannual time scales

    Directory of Open Access Journals (Sweden)

    Hwayoung Jeoung

    2014-01-01

    Full Text Available On seasonal and interannual time scales, weather is highly influential in aerosol variability. In this study, we investigate the relationship between fine-mode AOD (fAOD and precipitation on these scales, in order to unravel the effect of wet weather on aerosol amount. We find with integrated satellite and ground observations that biomass burning related fAOD has a relatively greater seasonal variation than fossil fuel combustion related fAOD. It is also found that wet weather reduces biomass burning fAOD and increases fossil fuel combustion fAOD. Aerosol simulation models forced by reanalyses consistently simulate the biomass burning fAOD reduced during wet weather but only in the tropics and furthermore do not consistently increase fossil fuel combustion fAOD during wet conditions. The identified relationship between fAOD and precipitation in observations allows for seasonal predictability of fAOD, since average precipitation can be predicted a few to several months in advance due to the well-established predictability of El Niño-Southern Oscillation (ENSO. We reveal ENSO-covariant fAOD using a rotated component principal analysis of combined interannual variation of sea surface temperature, precipitation and fAOD. During the warm phase of ENSO, we find that fAOD increases over Indonesia and the eastern coastal area of China, and decreases over South Asia, the Amazon and the continental parts of China.

  6. A space and time scale-dependent nonlinear geostatistical approach for downscaling daily precipitation and temperature

    KAUST Repository

    Jha, Sanjeev Kumar

    2015-07-21

    A geostatistical framework is proposed to downscale daily precipitation and temperature. The methodology is based on multiple-point geostatistics (MPS), where a multivariate training image is used to represent the spatial relationship between daily precipitation and daily temperature over several years. Here, the training image consists of daily rainfall and temperature outputs from the Weather Research and Forecasting (WRF) model at 50 km and 10 km resolution for a twenty year period ranging from 1985 to 2004. The data are used to predict downscaled climate variables for the year 2005. The result, for each downscaled pixel, is daily time series of precipitation and temperature that are spatially dependent. Comparison of predicted precipitation and temperature against a reference dataset indicates that both the seasonal average climate response together with the temporal variability are well reproduced. The explicit inclusion of time dependence is explored by considering the climate properties of the previous day as an additional variable. Comparison of simulations with and without inclusion of time dependence shows that the temporal dependence only slightly improves the daily prediction because the temporal variability is already well represented in the conditioning data. Overall, the study shows that the multiple-point geostatistics approach is an efficient tool to be used for statistical downscaling to obtain local scale estimates of precipitation and temperature from General Circulation Models. This article is protected by copyright. All rights reserved.

  7. Multi-Time Scale Control of Demand Flexibility in Smart Distribution Networks

    Directory of Open Access Journals (Sweden)

    Bishnu P. Bhattarai

    2017-01-01

    Full Text Available This paper presents a multi-timescale control strategy to deploy electric vehicle (EV demand flexibility for simultaneously providing power balancing, grid congestion management, and economic benefits to participating actors. First, an EV charging problem is investigated from consumer, aggregator, and distribution system operator’s perspectives. A hierarchical control architecture (HCA comprising scheduling, coordinative, and adaptive layers is then designed to realize their coordinative goal. This is realized by integrating multi-time scale controls that work from a day-ahead scheduling up to real-time adaptive control. The performance of the developed method is investigated with high EV penetration in a typical residential distribution grid. The simulation results demonstrate that HCA efficiently utilizes demand flexibility stemming from EVs to solve grid unbalancing and congestions with simultaneous maximization of economic benefits to the participating actors. This is ensured by enabling EV participation in day-ahead, balancing, and regulation markets. For the given network configuration and pricing structure, HCA ensures the EV owners to get paid up to five times the cost they were paying without control.

  8. Extending the length and time scales of Gram–Schmidt Lyapunov vector computations

    International Nuclear Information System (INIS)

    Costa, Anthony B.; Green, Jason R.

    2013-01-01

    Lyapunov vectors have found growing interest recently due to their ability to characterize systems out of thermodynamic equilibrium. The computation of orthogonal Gram–Schmidt vectors requires multiplication and QR decomposition of large matrices, which grow as N 2 (with the particle count). This expense has limited such calculations to relatively small systems and short time scales. Here, we detail two implementations of an algorithm for computing Gram–Schmidt vectors. The first is a distributed-memory message-passing method using Scalapack. The second uses the newly-released MAGMA library for GPUs. We compare the performance of both codes for Lennard–Jones fluids from N=100 to 1300 between Intel Nahalem/Infiniband DDR and NVIDIA C2050 architectures. To our best knowledge, these are the largest systems for which the Gram–Schmidt Lyapunov vectors have been computed, and the first time their calculation has been GPU-accelerated. We conclude that Lyapunov vector calculations can be significantly extended in length and time by leveraging the power of GPU-accelerated linear algebra

  9. Large-Scale Timing Distribution and RF-Synchronization for FEL Facilities

    CERN Document Server

    Kim, Jung Won; Kaertner, Franz X; Muecke, Oliver; Perrott, Michael

    2004-01-01

    For future advances in accelerator physics in general and seeding of FELs in particular, precise synchronization between seed radiation, low-level RF-systems and photo-injector laser is required. Typical synchronization methods based on direct photodetection are limited by the detector nonlinearities, which lead to amplitude-to-phase conversion and introduce timing jitter. A new synchronization scheme for extraction of low jitter RF-signals from optical pulse trains distributed by mode-locked lasers is proposed. It is robust against photodetector nonlinearities. The scheme is based on a transfer of timing information into an intensity imbalance between the two output beams from a Sagnac-loop interferometer. As a first experimental demonstration, sub-100 fs timing jitter between the extracted 2 GHz RF-signal and the 100 MHz optical pulse train from a mode-locked Ti:sapphire laser is demonstrated. Numerical simulations show that scaling to sub-femtosecond precision is possible. Together with mode-locked fiber l...

  10. Scaling symmetry, renormalization, and time series modeling: the case of financial assets dynamics.

    Science.gov (United States)

    Zamparo, Marco; Baldovin, Fulvio; Caraglio, Michele; Stella, Attilio L

    2013-12-01

    We present and discuss a stochastic model of financial assets dynamics based on the idea of an inverse renormalization group strategy. With this strategy we construct the multivariate distributions of elementary returns based on the scaling with time of the probability density of their aggregates. In its simplest version the model is the product of an endogenous autoregressive component and a random rescaling factor designed to embody also exogenous influences. Mathematical properties like increments' stationarity and ergodicity can be proven. Thanks to the relatively low number of parameters, model calibration can be conveniently based on a method of moments, as exemplified in the case of historical data of the S&P500 index. The calibrated model accounts very well for many stylized facts, like volatility clustering, power-law decay of the volatility autocorrelation function, and multiscaling with time of the aggregated return distribution. In agreement with empirical evidence in finance, the dynamics is not invariant under time reversal, and, with suitable generalizations, skewness of the return distribution and leverage effects can be included. The analytical tractability of the model opens interesting perspectives for applications, for instance, in terms of obtaining closed formulas for derivative pricing. Further important features are the possibility of making contact, in certain limits, with autoregressive models widely used in finance and the possibility of partially resolving the long- and short-memory components of the volatility, with consistent results when applied to historical series.

  11. Insights into the photochemical disproportionation of transition metal dimers on the picosecond time scale.

    Science.gov (United States)

    Lomont, Justin P; Nguyen, Son C; Harris, Charles B

    2013-05-09

    The reactivity of five transition metal dimers toward photochemical, in-solvent-cage disproportionation has been investigated using picosecond time-resolved infrared spectroscopy. Previous ultrafast studies on [CpW(CO)3]2 established the role of an in-cage disproportionation mechanism involving electron transfer between 17- and 19-electron radicals prior to diffusion out of the solvent cage. New results from time-resolved infrared studies reveal that the identity of the transition metal complex dictates whether the in-cage disproportionation mechanism can take place, as well as the more fundamental issue of whether 19-electron intermediates are able to form on the picosecond time scale. Significantly, the in-cage disproportionation mechanism observed previously for the tungsten dimer does not characterize the reactivity of four out of the five transition metal dimers in this study. The differences in the ability to form 19-electron intermediates are interpreted either in terms of differences in the 17/19-electron equilibrium or of differences in an energetic barrier to associative coordination of a Lewis base, whereas the case for the in-cage vs diffusive disproportionation mechanisms depends on whether the 19-electron reducing agent is genuinely characterized by 19-electron configuration at the metal center or if it is better described as an 18 + δ complex. These results help to better understand the factors that dictate mechanisms of radical disproportionation and carry implications for radical chain mechanisms.

  12. Constraint-Based Time-Scale Modification of Music Recordings for Noise Beautification

    Directory of Open Access Journals (Sweden)

    Meinard Müller

    2018-03-01

    Full Text Available In magnetic resonance imaging (MRI, a patient is exposed to beat-like knocking sounds, often interrupted by periods of silence, which are caused by pulsing currents of the MRI scanner. In order to increase the patient’s comfort, one strategy is to play back ambient music to induce positive emotions and to reduce stress during the MRI scanning process. To create an overall acceptable acoustic environment, one idea is to adapt the music to the locally periodic acoustic MRI noise. Motivated by this scenario, we consider in this paper the general problem of adapting a given music recording to fulfill certain temporal constraints. More concretely, the constraints are given by a reference time axis with specified time points (e.g., the time positions of the MRI scanner’s knocking sounds. Then, the goal is to temporally modify a suitable music recording such that its beat positions align with the specified time points. As one technical contribution, we model this alignment task as an optimization problem with the objective to fulfill the constraints while avoiding strong local distortions in the music. Furthermore, we introduce an efficient algorithm based on dynamic programming for solving this task. Based on the computed alignment, we use existing time-scale modification procedures for locally adapting the music recording. To illustrate the outcome of our procedure, we discuss representative synthetic and real-world examples, which can be accessed via an interactive website. In particular, these examples indicate the potential of automated methods for noise beautification within the MRI application scenario.

  13. Existence of positive solutions for semipositone dynamic system on time scales

    Directory of Open Access Journals (Sweden)

    You-Wei Zhang

    2008-08-01

    Full Text Available In this paper, we study the following semipositone dynamic system on time scales $$displaylines{ -x^{DeltaDelta}(t=f(t,y+p(t, quad tin(0,T_{mathbb{T}},cr -y^{DeltaDelta}(t=g(t,x, quad tin(0,T_{mathbb{T}},cr x(0=x(sigma^{2}(T=0, cr alpha{y(0}-eta{y^{Delta}{(0}}= gamma{y(sigma(T}+delta{y^{Delta}(sigma(T}=0. }$$ Using fixed point index theory, we show the existence of at least one positive solution. The interesting point is the that nonlinear term is allowed to change sign and may tend to negative infinity.

  14. Modeling and Control of a Large Nuclear Reactor A Three-Time-Scale Approach

    CERN Document Server

    Shimjith, S R; Bandyopadhyay, B

    2013-01-01

    Control analysis and design of large nuclear reactors requires a suitable mathematical model representing the steady state and dynamic behavior of the reactor with reasonable accuracy. This task is, however, quite challenging because of several complex dynamic phenomena existing in a reactor. Quite often, the models developed would be of prohibitively large order, non-linear and of complex structure not readily amenable for control studies. Moreover, the existence of simultaneously occurring dynamic variations at different speeds makes the mathematical model susceptible to numerical ill-conditioning, inhibiting direct application of standard control techniques. This monograph introduces a technique for mathematical modeling of large nuclear reactors in the framework of multi-point kinetics, to obtain a comparatively smaller order model in standard state space form thus overcoming these difficulties. It further brings in innovative methods for controller design for systems exhibiting multi-time-scale property,...

  15. Long time scale plasma dynamics driven by the double tearing mode in reversed shear plasmas

    International Nuclear Information System (INIS)

    Ishii, Y.; Azumi, M.; Kishimoto, Y.; Leboeuf, J.N.

    2003-01-01

    The new nonlinear destabilization process is found in the nonlinear phase of the double tearing mode (DTM) by using the reduced MHD equations in a helical symmetry. The nonlinear destabilization causes the abrupt growth of DTM and subsequent collapse after long time scale evolution in the Rutherford-type regime. The nonlinear growth of the DTM is suddenly triggered, when the triangular deformation of magnetic islands with sharp current point at the x-point around the outer rational surface exceeds a certain value. Such structure deformation is accelerated during the nonlinear growth phase. Decreasing the resistivity increases the sharpness of the triangularity and the spontaneous growth rate in the abrupt growth phase is almost independent on the resistivity. Current point formation is also confirmed in the multi-helicity simulation, where the magnetic fields become stochastic between two rational surfaces. (author)

  16. Stochastic models for structured populations scaling limits and long time behavior

    CERN Document Server

    Meleard, Sylvie

    2015-01-01

    In this contribution, several probabilistic tools to study population dynamics are developed. The focus is on scaling limits of qualitatively different stochastic individual based models and the long time behavior of some classes of limiting processes. Structured population dynamics are modeled by measure-valued processes describing the individual behaviors and taking into account the demographic and mutational parameters, and possible interactions between individuals. Many quantitative parameters appear in these models and several relevant normalizations are considered, leading  to infinite-dimensional deterministic or stochastic large-population approximations. Biologically relevant questions are considered, such as extinction criteria, the effect of large birth events, the impact of  environmental catastrophes, the mutation-selection trade-off, recovery criteria in parasite infections, genealogical properties of a sample of individuals. These notes originated from a lecture series on Structured P...

  17. Eigenvalue Problems for Systems of Nonlinear Boundary Value Problems on Time Scales

    Directory of Open Access Journals (Sweden)

    S. K. Ntouyas

    2008-01-01

    Full Text Available Values of λ are determined for which there exist positive solutions of the system of dynamic equations, uΔΔ(t+λa(tf(v(σ(t=0, vΔΔ(t+λb(tg(u(σ(t=0, for t∈[0,1]T, satisfying the boundary conditions, u(0=0=u(σ2(1, v(0=0=v(σ2(1, where T is a time scale. A Guo-Krasnosel'skii fixed point-theorem is applied.

  18. Localized diffusive motion on two different time scales in solid alkane nanoparticles

    International Nuclear Information System (INIS)

    Wang, S.-K.; Mamontov, Eugene; Bai, M.; Hansen, F.Y.; Taub, H.; Copley, J.R.D.; Garcia Sakai, V.; Gasparovic, Goran; Jenkins, Timothy; Tyagi, M.; Herwig, Kenneth W.; Neumann, D.A.; Montfrooij, W.; Volkmann, U.G.

    2010-01-01

    High-energy-resolution quasielastic neutron scattering on three complementary spectrometers has been used to investigate molecular diffusive motion in solid nano- to bulk-sized particles of the alkane n-C32H66. The crystalline-to-plastic and plastic-to-fluid phase transition temperatures are observed to decrease as the particle size decreases. In all samples, localized molecular diffusive motion in the plastic phase occurs on two different time scales: a 'fast' motion corresponding to uniaxial rotation about the long molecular axis; and a 'slow' motion attributed to conformational changes of the molecule. Contrary to the conventional interpretation in bulk alkanes, the fast uniaxial rotation begins in the low-temperature crystalline phase.

  19. Time Discounting and Credit Market Access in a Large-Scale Cash Transfer Programme

    Science.gov (United States)

    Handa, Sudhanshu; Martorano, Bruno; Halpern, Carolyn; Pettifor, Audrey; Thirumurthy, Harsha

    2017-01-01

    Summary Time discounting is thought to influence decision-making in almost every sphere of life, including personal finances, diet, exercise and sexual behavior. In this article we provide evidence on whether a national poverty alleviation program in Kenya can affect inter-temporal decisions. We administered a preferences module as part of a large-scale impact evaluation of the Kenyan Government’s Cash Transfer for Orphans and Vulnerable Children. Four years into the program we find that individuals in the treatment group are only marginally more likely to wait for future money, due in part to the erosion of the value of the transfer by inflation. However among the poorest households for whom the value of transfer is still relatively large we find significant program effects on the propensity to wait. We also find strong program effects among those who have access to credit markets though the program itself does not improve access to credit. PMID:28260842

  20. Effects of demographic stochasticity on biological community assembly on evolutionary time scales

    KAUST Repository

    Murase, Yohsuke

    2010-04-13

    We study the effects of demographic stochasticity on the long-term dynamics of biological coevolution models of community assembly. The noise is induced in order to check the validity of deterministic population dynamics. While mutualistic communities show little dependence on the stochastic population fluctuations, predator-prey models show strong dependence on the stochasticity, indicating the relevance of the finiteness of the populations. For a predator-prey model, the noise causes drastic decreases in diversity and total population size. The communities that emerge under influence of the noise consist of species strongly coupled with each other and have stronger linear stability around the fixed-point populations than the corresponding noiseless model. The dynamics on evolutionary time scales for the predator-prey model are also altered by the noise. Approximate 1/f fluctuations are observed with noise, while 1/ f2 fluctuations are found for the model without demographic noise. © 2010 The American Physical Society.

  1. Real-time detection of antibiotic activity by measuring nanometer-scale bacterial deformation

    Science.gov (United States)

    Iriya, Rafael; Syal, Karan; Jing, Wenwen; Mo, Manni; Yu, Hui; Haydel, Shelley E.; Wang, Shaopeng; Tao, Nongjian

    2017-12-01

    Diagnosing antibiotic-resistant bacteria currently requires sensitive detection of phenotypic changes associated with antibiotic action on bacteria. Here, we present an optical imaging-based approach to quantify bacterial membrane deformation as a phenotypic feature in real-time with a nanometer scale (˜9 nm) detection limit. Using this approach, we found two types of antibiotic-induced membrane deformations in different bacterial strains: polymyxin B induced relatively uniform spatial deformation of Escherichia coli O157:H7 cells leading to change in cellular volume and ampicillin-induced localized spatial deformation leading to the formation of bulges or protrusions on uropathogenic E. coli CFT073 cells. We anticipate that the approach will contribute to understanding of antibiotic phenotypic effects on bacteria with a potential for applications in rapid antibiotic susceptibility testing.

  2. Fall detection and classifications based on time-scale radar signal characteristics

    Science.gov (United States)

    Gadde, Ajay; Amin, Moeness G.; Zhang, Yimin D.; Ahmad, Fauzia

    2014-05-01

    Unattended catastrophic falls result in risk to the lives of elderly. There are growing efforts and rising interest in detecting falls of the aging population, especially those living alone. Radar serves as an effective non-intrusive sensor for detecting human activities. For radar to be effective, it is important to achieve low false alarms, i.e., the system can reliably differentiate between a fall and other human activities. In this paper, we discuss the time-scale based signal analysis of the radar returns from a human target. Reliable features are extracted from the scalogram and are used for fall classifications. The classification results and the advantages of using a wavelet transform are discussed.

  3. Response of vegetation to different time-scales drought across China: Spatiotemporal patterns, causes and implications

    Science.gov (United States)

    Zhang, Qiang; Kong, Dongdong; Singh, Vijay P.; Shi, Peijun

    2017-05-01

    Based on Normalized Difference Vegetation Index (NDVI) and Standardized Precipitation Evapotranspiration Index (SPEI), we investigated vegetation response to different time-scales drought across different vegetation types and homogeneous clusters in China, by annual maximum Pearson correlation (Rmax) and the corresponding time-scales of drought. Results showed that: (1) 8 subregions with homogeneous climate-vegetation conditions were identified using Fuzzy C-Means algorithm; (2) SPEI and NDVI's annual Rmax were in significantly positive correlation in most regions of China, indicating that vegetation biomass were influenced mainly by the spatiotemporal characteristics of the water availability. The southeastern Yangtze River basin and the lower Pearl River basin are dominated by abundant precipitation, and vegetation is not sensitive to droughts in these regions. The northeastern Heilongjiang province, the Changbai Mountains and western Sichuan province are characterized by weak NDVI versus SPEI relations, indicating a relatively small effect of drought on vegetation; (3) The effects of annual average water balance, annual average annual precipitation, annual average effective accumulative temperature, and annual average daily sunshine hours on the NDVI versus SPEI correlation show that the annual average water balance is the key factor behind the change of vegetation vigor. It can therefore be concluded that the change of water availability is the key factor behind the change of vegetation activity and biomass. Regional precipitation or water balance was significantly related to the correlation between SPEI and NDVI. Vegetation in the regions with longer sunshine hours is more sensitive to droughts. In general, the sensitivity of grassland to droughts is the largest, followed by the sensitivity of shrubs and forests to droughts.

  4. Validity and Reliability Study for Studio Work Course Time Management Scale

    Directory of Open Access Journals (Sweden)

    İnci BULUT KILIÇ

    2016-12-01

    Full Text Available The purpose of this study is to develop a data collection tool to be used in determining the time management skill levels of visual arts teacher candidates in their studio work courses. After a review of the literature, a pool of items was created and arranged upon expert recommendation and a pilot study for intelligibility of the expressions was conducted. The researcher contacted a total of 288 visual arts teacher candidates who all agreed to volunteer to take part in this research. As a result of exploratory (EFA and confirmatory (CFA factor analyses, the scale determined to have four factors and 26 items. Variance ration explained by all four factors is 47.23%. Factor loadings were valued from 0.48 to 0.80. Goodness of fit values calculated by CFA were found to be χ2/sd rate 1.94 (χ2/sd=567.17/291. The other goodness of fit values calculated by CFA were RMSEA=0.05, NNFI=0.92, CFI=0.93, IFI=0.93, and RMR=0.06. All fitness indexes obtained were found to be sufficient for model fitness, and accordingly it was decided that this structure was validated. As a result of the difference between item average scores of the 27% subgroup and super group, distinctiveness of all items were found to be significant at p<0.001 level and Cronbach’s Alpha coefficients of the factors were calculated to range from 0.73 to 0.82. Cronbach’s Alpha of the total scale was calculated as 0.83. The results indicate that the questionnaire provides opportunity to make meaningful interpretations on the time management skills of visual arts teacher candidates for studio work courses.

  5. Climate scenarios for Olkiluoto on a time-scale of 120,000 years

    Energy Technology Data Exchange (ETDEWEB)

    Pimenoff, N.; Venaelaeinen, A.; Jaervinen, H. [Finnish Meteorological Institute, Helsinki (Finland)

    2011-12-15

    Posiva Oy is planning to dispose of spent nuclear fuel in a repository, to be constructed at a depth of 400 m in the crystalline bedrock at Olkiluoto, Finland. Planning the storage requires careful consideration of many aspects, including an assessment of long-term repository safety. For estimating possible climate states at Olkiluoto on a time-scale of 120,000 years, we analyze climate simulations of an Earth System Model of Intermediate Complexity (CLIMBER-2) coupled with an ice sheet model (SICOPOLIS). The simulations into the future clearly show that the onset of the next glaciation is strongly dependent on the Earth's orbital variations and the atmospheric CO{sub 2} concentration. It is evident that due to global warming, the climate of the next centuries will be warmer and wetter than at present. Most likely, due to global warming and low variations in the Earth's orbit around the sun, the present interglacial will last for at least the next 30,000 years. Further, the future simulations showed that the insolation minima on the Northern Hemisphere 50,000-60,000 and 90,000-100,000 years after the present hold a potential for the onset of the next glaciation. Hence, on a time-scale of 120,000 years, one must take into account climate periods lasting several thousand years having the following features: an interglacial climate, a periglacial climate, a climate with an ice sheet margin near Olkiluoto, a glacial climate with an ice sheet covering Olkiluoto, and a climate with Olkiluoto being depressed below sea level after glaciation due to isostatic depression. Due to the uncertainties related to the evolution of the future climate, it is recommended the simulations into the far future to be used only qualitatively. Quantitative information about glacial climate is achieved from the reconstructions and simulations of the past climate. (orig.)

  6. Climate scenarios for Olkiluoto on a time-scale of 120,000 years

    International Nuclear Information System (INIS)

    Pimenoff, N.; Venaelaeinen, A.; Jaervinen, H.

    2011-12-01

    Posiva Oy is planning to dispose of spent nuclear fuel in a repository, to be constructed at a depth of 400 m in the crystalline bedrock at Olkiluoto, Finland. Planning the storage requires careful consideration of many aspects, including an assessment of long-term repository safety. For estimating possible climate states at Olkiluoto on a time-scale of 120,000 years, we analyze climate simulations of an Earth System Model of Intermediate Complexity (CLIMBER-2) coupled with an ice sheet model (SICOPOLIS). The simulations into the future clearly show that the onset of the next glaciation is strongly dependent on the Earth's orbital variations and the atmospheric CO 2 concentration. It is evident that due to global warming, the climate of the next centuries will be warmer and wetter than at present. Most likely, due to global warming and low variations in the Earth's orbit around the sun, the present interglacial will last for at least the next 30,000 years. Further, the future simulations showed that the insolation minima on the Northern Hemisphere 50,000-60,000 and 90,000-100,000 years after the present hold a potential for the onset of the next glaciation. Hence, on a time-scale of 120,000 years, one must take into account climate periods lasting several thousand years having the following features: an interglacial climate, a periglacial climate, a climate with an ice sheet margin near Olkiluoto, a glacial climate with an ice sheet covering Olkiluoto, and a climate with Olkiluoto being depressed below sea level after glaciation due to isostatic depression. Due to the uncertainties related to the evolution of the future climate, it is recommended the simulations into the far future to be used only qualitatively. Quantitative information about glacial climate is achieved from the reconstructions and simulations of the past climate. (orig.)

  7. Climate scenarios for Olkiluoto on a time-scale of 100,000 years

    International Nuclear Information System (INIS)

    Pimenoff, N.; Venaelaeinen, A.; Jaervinen, H.

    2011-01-01

    Posiva Oy is planning to dispose of spent nuclear fuel in a repository, to be constructed at a depth of 400 m in the crystalline bedrock at Olkiluoto, Finland. Planning the storage requires careful consideration of many aspects, including an assessment of long-term repository safety. For estimating possible climate states at Olkiluoto on a time-scale of 100,000 years, we analyze climate simulations of an Earth System Model of Intermediate Complexity (CLIMBER-2) coupled with an ice sheet model (SICOPOLIS). The simulations into the future clearly show that the onset of the next glaciation is strongly dependent on the Earth's orbital variations and the atmospheric CO 2 concentration. It is evident that due to global warming, the climate of the next centuries will be warmer and wetter than at present. Most likely, due to global warming and low variations in the Earth's orbit around the sun, the present interglacial will last for at least the next 30,000 years. Further, the future simulations showed that the insolation minima on the Northern Hemisphere 50,000-60,000 and 90,000-100,000 years after the present hold a potential for the onset of the next glaciation. Hence, on a time-scale of 100,000 years, one must take into account climate periods lasting several thousand years having the following features: an interglacial climate, a periglacial climate, a climate with an ice sheet margin near Olkiluoto, a glacial climate with an ice sheet covering Olkiluoto, and a climate with Olkiluoto being depressed below sea level after glaciation due to isostatic depression. Due to the uncertainties related to the evolution of the future climate, it is recommended the simulations into the far future to be used only qualitatively. Quantitative information about glacial climate is achieved from the reconstructions and simulations of the past climate. (orig.)

  8. Implementing large-scale quality improvement: lessons from The Productive Ward: Releasing Time to Care.

    Science.gov (United States)

    Morrow, Elizabeth; Robert, Glenn; Maben, Jill; Griffiths, Peter

    2012-01-01

    This paper aims to focus on facilitating large-scale quality improvement in health care, and specifically understanding more about the known challenges associated with implementation of lean innovations: receptivity, the complexity of adoption processes, evidence of the innovation, and embedding change. Lessons are drawn from the implementation of The Productive Ward: Releasing Time to Care programme in English hospitals. The study upon which the paper draws was a mixed-method evaluation that aimed to capture the perceptions of three main stakeholder groups: national-level policymakers (15 semi-structured interviews); senior hospital managers (a national web-based survey of 150 staff); and healthcare practitioners (case studies within five hospitals involving 58 members of staff). The views of these stakeholder groups were analysed using a diffusion of innovations theoretical framework to examine aspects of the innovation, the organisation, the wider context and linkages. Although The Productive Ward was widely supported, stakeholders at different levels identified varying facilitators and challenges to implementation. Key issues for all stakeholders were staff time to work on the programme and showing evidence of the impact on staff, patients and ward environments. To support implementation, policymakers should focus on expressing what can be gained locally using success stories and guidance from "early adopters". Service managers, clinical educators and professional bodies can help to spread good practice and encourage professional leadership and support. Further research could help to secure support for the programme by generating evidence about the innovation, and specifically its clinical effectiveness and broader links to public expectations and experiences of healthcare. This paper draws lessons from the implementation of The Productive Ward programme in England, which can inform the implementation of other large-scale programmes of quality improvement in

  9. The case for a Supersite for real-time GNSS hazard monitoring on a global scale

    Science.gov (United States)

    Bar-Sever, Y. E.

    2017-12-01

    Real-time measurements from many hundreds of GNSS tracking sites around the world are publicly available today, and the amount of streaming data is steadily increasing as national agencies densify their local and global infrastructure for natural hazard monitoring and a variety of geodetic, cadastral, and other civil applications. Thousands of such sites can soon be expected on a global scale. It is a challenge to manage and make optimal use of this massive amount of real-time data. We advocate the creation of Supersite(s), in the parlance of the U.N. Global Earth Observation System of Systems (https://www.earthobservations.org/geoss.php), to generate high level real-time data products from the raw GNSS measurements from all available sources (many thousands of sites). These products include: • High rate, real-time positioning time series for assessing rapid crustal motion due to Earthquakes, volcanic activities, land slides, etc. • Co-seismic displacement to help resolve earthquake mechanism and moment magnitude • Real-time total electron content (TEC) fluctuations to augment Dart buoy in detecting and tracking tsunamis • Aggregation of the many disparate raw data dispensation servers (Casters)Recognizing that natural hazards transcend national boundaries in terms of direct and indirect (e.g., economical, security) impact, the benefits from centralized, authoritative processing of GNSS measurements is manifold: • Offers a one-stop shop to less developed nations and institutions for raw and high-level products, in support of research and applications • Promotes the installation of tracking sites and the contribution of data from nations without the ability to process the data • Reduce dependency on local responsible agencies impacted by a natural disaster • Reliable 24/7 operations, independent of voluntary, best effort contributions from good-willing scientific organizationsThe JPL GNSS Real-Time Earthquake and Tsunami (GREAT) Alert has been

  10. PHIBSS: Unified Scaling Relations of Gas Depletion Time and Molecular Gas Fractions

    Science.gov (United States)

    Tacconi, L. J.; Genzel, R.; Saintonge, A.; Combes, F.; García-Burillo, S.; Neri, R.; Bolatto, A.; Contini, T.; Förster Schreiber, N. M.; Lilly, S.; Lutz, D.; Wuyts, S.; Accurso, G.; Boissier, J.; Boone, F.; Bouché, N.; Bournaud, F.; Burkert, A.; Carollo, M.; Cooper, M.; Cox, P.; Feruglio, C.; Freundlich, J.; Herrera-Camus, R.; Juneau, S.; Lippa, M.; Naab, T.; Renzini, A.; Salome, P.; Sternberg, A.; Tadaki, K.; Übler, H.; Walter, F.; Weiner, B.; Weiss, A.

    2018-02-01

    This paper provides an update of our previous scaling relations between galaxy-integrated molecular gas masses, stellar masses, and star formation rates (SFRs), in the framework of the star formation main sequence (MS), with the main goal of testing for possible systematic effects. For this purpose our new study combines three independent methods of determining molecular gas masses from CO line fluxes, far-infrared dust spectral energy distributions, and ∼1 mm dust photometry, in a large sample of 1444 star-forming galaxies between z = 0 and 4. The sample covers the stellar mass range log(M */M ⊙) = 9.0–11.8, and SFRs relative to that on the MS, δMS = SFR/SFR(MS), from 10‑1.3 to 102.2. Our most important finding is that all data sets, despite the different techniques and analysis methods used, follow the same scaling trends, once method-to-method zero-point offsets are minimized and uncertainties are properly taken into account. The molecular gas depletion time t depl, defined as the ratio of molecular gas mass to SFR, scales as (1 + z)‑0.6 × (δMS)‑0.44 and is only weakly dependent on stellar mass. The ratio of molecular to stellar mass μ gas depends on (1+z{)}2.5× {(δ {MS})}0.52× {({M}* )}-0.36, which tracks the evolution of the specific SFR. The redshift dependence of μ gas requires a curvature term, as may the mass dependences of t depl and μ gas. We find no or only weak correlations of t depl and μ gas with optical size R or surface density once one removes the above scalings, but we caution that optical sizes may not be appropriate for the high gas and dust columns at high z. Based on observations of an IRAM Legacy Program carried out with the NOEMA, operated by the Institute for Radio Astronomy in the Millimetre Range (IRAM), which is funded by a partnership of INSU/CNRS (France), MPG (Germany), and IGN (Spain).

  11. Analytical Solutions for Multi-Time Scale Fractional Stochastic Differential Equations Driven by Fractional Brownian Motion and Their Applications

    Directory of Open Access Journals (Sweden)

    Xiao-Li Ding

    2018-01-01

    Full Text Available In this paper, we investigate analytical solutions of multi-time scale fractional stochastic differential equations driven by fractional Brownian motions. We firstly decompose homogeneous multi-time scale fractional stochastic differential equations driven by fractional Brownian motions into independent differential subequations, and give their analytical solutions. Then, we use the variation of constant parameters to obtain the solutions of nonhomogeneous multi-time scale fractional stochastic differential equations driven by fractional Brownian motions. Finally, we give three examples to demonstrate the applicability of our obtained results.

  12. Mechanisms and time scales of glacial inception simulated with an Earth system model of intermediate complexity

    Directory of Open Access Journals (Sweden)

    R. Calov

    2009-06-01

    Full Text Available We investigate glacial inception and glacial thresholds in the climate-cryosphere system utilising the Earth system model of intermediate complexity CLIMBER-2, which includes modules for atmosphere, terrestrial vegetation, ocean and interactive ice sheets. The latter are described by the three-dimensional polythermal ice-sheet model SICOPOLIS. A bifurcation which represents glacial inception is analysed with two different model setups: one setup with dynamical ice-sheet model and another setup without it. The respective glacial thresholds differ in terms of maximum boreal summer insolation at 65° N (hereafter referred as Milankovitch forcing (MF. The glacial threshold of the configuration without ice-sheet dynamics corresponds to a much lower value of MF compared to the full model. If MF attains values only slightly below the aforementioned threshold there is fast transient response. Depending on the value of MF relative to the glacial threshold, the transient response time of inland-ice volume in the model configuration with ice-sheet dynamics ranges from 10 000 to 100 000 years. Due to these long response times, a glacial threshold obtained in an equilibrium simulation is not directly applicable to the transient response of the climate-cryosphere system to time-dependent orbital forcing. It is demonstrated that in transient simulations just crossing of the glacial threshold does not imply large-scale glaciation of the Northern Hemisphere. We found that in transient simulations MF has to drop well below the glacial threshold determined in an equilibrium simulation to initiate glacial inception. Finally, we show that the asynchronous coupling between climate and inland-ice components allows one sufficient realistic simulation of glacial inception and, at the same time, a considerable reduction of computational costs.

  13. Fate of the sperm mitochondria, and the incorporation, conversion, and disassembly of the sperm tail structures during bovine fertilization.

    Science.gov (United States)

    Sutovsky, P; Navara, C S; Schatten, G

    1996-12-01

    Sperm incorporation and the conversion of the sperm-derived components into zygotic structures during in vitro fertilization of bovine oocytes was explored by combining ultrastructural studies with observations of the fertilizing sperm tagged with a mitochondrion-specific vital dye MitoTracker green FM. The zygotes fertilized by the MitoTracker-labeled sperm were fixed at various times after fertilization and then processed for immunocytochemistry to examine the distribution of DNA, microtubules, and sperm tail components, including the fibrous sheath and axonemal microtubules. We show here that the complete incorporation of the sperm, but not sperm-oocyte binding and oocyte activation, depends upon the integrity of oocyte microfilaments and is inhibited by the microfilament disrupter cytochalasin B. After sperm incorporation, the mitochondria are displaced from the sperm's connecting piece, and the sperm centriole is exposed to the egg cytoplasm. This event is followed by the formation of the microtubule-based sperm aster, which is responsible for the union of male and female pronuclei. Concomitantly, the major structure of the sperm principal piece, the fibrous sheath, disappears. After the first mitosis, the compact mitochondrial sheath can be seen in one of the blastomeres. An aggregate of the sperm mitochondria is observed at the entry of the second mitosis, although they remain in the vicinity of the nucleus and can later be seen at one pole of the metaphase spindle. The mitochondrial cluster is occasionally found in one of the blastomeres in the early-stage four-cell embryos, but it is no longer detected by the beginning of the third mitotic cycle. These data suggest that the disassembly of the sperm tail during bovine fertilization occurs as a series of precisely orchestrated events involving the destruction (fibrous sheath and mitochondrial sheath) and transformation (DNA, sperm centriole) of particular sperm structures into zygotic and embryonic

  14. Time Scales of the European Surface Air Temperature Variability: The Role of the 7-8 Year Cycle

    Czech Academy of Sciences Publication Activity Database

    Jajcay, Nikola; Hlinka, Jaroslav; Kravtsov, S.; Tsonis, A.A.; Paluš, Milan

    2016-01-01

    Roč. 43, č. 2 (2016), s. 902-909 ISSN 0094-8276 R&D Projects: GA MŠk LH14001 Institutional support: RVO:67985807 Keywords : 7-8 year cycle * air temperature variability * annual cycle amplitude * cross-scale interactions * seasonality * time scales Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 4.253, year: 2016

  15. Time-Varying, Multi-Scale Adaptive System Reliability Analysis of Lifeline Infrastructure Networks

    Energy Technology Data Exchange (ETDEWEB)

    Gearhart, Jared Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Kurtz, Nolan Scot [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-09-01

    The majority of current societal and economic needs world-wide are met by the existing networked, civil infrastructure. Because the cost of managing such infrastructure is high and increases with time, risk-informed decision making is essential for those with management responsibilities for these systems. To address such concerns, a methodology that accounts for new information, deterioration, component models, component importance, group importance, network reliability, hierarchical structure organization, and efficiency concerns has been developed. This methodology analyzes the use of new information through the lens of adaptive Importance Sampling for structural reliability problems. Deterioration, multi-scale bridge models, and time-variant component importance are investigated for a specific network. Furthermore, both bridge and pipeline networks are studied for group and component importance, as well as for hierarchical structures in the context of specific networks. Efficiency is the primary driver throughout this study. With this risk-informed approach, those responsible for management can address deteriorating infrastructure networks in an organized manner.

  16. Linear time algorithms to construct populations fitting multiple constraint distributions at genomic scales.

    Science.gov (United States)

    Siragusa, Enrico; Haiminen, Niina; Utro, Filippo; Parida, Laxmi

    2017-10-09

    Computer simulations can be used to study population genetic methods, models and parameters, as well as to predict potential outcomes. For example, in plant populations, predicting the outcome of breeding operations can be studied using simulations. In-silico construction of populations with pre-specified characteristics is an important task in breeding optimization and other population genetic studies. We present two linear time Simulation using Best-fit Algorithms (SimBA) for two classes of problems where each co-fits two distributions: SimBA-LD fits linkage disequilibrium and minimum allele frequency distributions, while SimBA-hap fits founder-haplotype and polyploid allele dosage distributions. An incremental gap-filling version of previously introduced SimBA-LD is here demonstrated to accurately fit the target distributions, allowing efficient large scale simulations. SimBA-hap accuracy and efficiency is demonstrated by simulating tetraploid populations with varying numbers of founder haplotypes, we evaluate both a linear time greedy algoritm and an optimal solution based on mixed-integer programming. SimBA is available on http://researcher.watson.ibm.com/project/5669.

  17. The time scales of the climate-economy feedback and the climatic cost of growth

    International Nuclear Information System (INIS)

    Hallegatte, Stephane

    2005-04-01

    This paper is based on the perception that the inertia of climate and socio-economic systems are key parameters in the climate change issue. In a first part, it develops and implements a new approach based on a simple integrated model with a particular focus on an innovative transient impact and adaptation modelling. In a second part, a climate-economy feedback is defined and characterized. It is found that: (i) it has a 70-year characteristic time, which is long when compared to the system's other time-scales, and it cannot act as a natural damping process of climate change; (ii) mitigation has to be anticipated since the feedback of an emission reduction on the economy is significant only after a 20-year delay and really efficient after a one-century delay; (iii) the IPCC methodology, that neglects the feedback from impacts to emissions, is acceptable up to 2100, whatever is the level of impacts. This analysis allows also to define a climatic cost of growth as the additional climate change damages due to the additional emissions linked to economic growth. Usefully, this metric for climate change damages is particularly independent of the baseline scenario. (orig.)

  18. The time scales of the climate-economy feedback and the climatic cost of growth

    Energy Technology Data Exchange (ETDEWEB)

    Hallegatte, Stephane [CIRED - CNRM, Nogent-sur-Marne (France)

    2005-04-01

    This paper is based on the perception that the inertia of climate and socio-economic systems are key parameters in the climate change issue. In a first part, it develops and implements a new approach based on a simple integrated model with a particular focus on an innovative transient impact and adaptation modelling. In a second part, a climate-economy feedback is defined and characterized. It is found that: (i) it has a 70-year characteristic time, which is long when compared to the system's other time-scales, and it cannot act as a natural damping process of climate change; (ii) mitigation has to be anticipated since the feedback of an emission reduction on the economy is significant only after a 20-year delay and really efficient after a one-century delay; (iii) the IPCC methodology, that neglects the feedback from impacts to emissions, is acceptable up to 2100, whatever is the level of impacts. This analysis allows also to define a climatic cost of growth as the additional climate change damages due to the additional emissions linked to economic growth. Usefully, this metric for climate change damages is particularly independent of the baseline scenario. (orig.)

  19. Relevant time- and length scale of touch-down for drops impacting on a heated surface

    Science.gov (United States)

    van Limbeek, Michiel A. J.; Shirota, Minori; Sun, Chao; Prosperetti, Andrea; Lohse, Detlef

    2015-11-01

    The vapor generated from a liquid drop impacting a hot solid surface can prevent it to make contact, depending on the solid temperature. The minimum temperature when no contact is made between the drop and the solid is called the dynamic Leidenfrost temperature. The latent heat needed to generated the vapor is drawn from the solid, and in general the Leidenfrost temperature depends on the solid thermal properties. Here we show experiments conducted on a sapphire plate, to minimize the cooling of the solid and ensuring nearly isothermal conditions. By using high speed total internal reflection imaging, we observe the drop base during impact up to about 100nm above the substrate surface. By this technique we are able to study the processes responsible for the transition between fully wetting and fully levitating drop impact conditions as the solid temperature increases. We reveal the relevant length- and time-scales for the dimple formation under the drop and explain their relevance for the late-time dynamics. As the transition regime is traversed from low to high temperature, the liquid-solid contact gradually decreases which reduces the friction with the solid, enhancing the spreading of the drop considerably.

  20. Time scales of representation in the human brain: weighing past information to predict future events

    Directory of Open Access Journals (Sweden)

    Lee eHarrison

    2011-04-01

    Full Text Available The estimates that humans make of statistical dependencies in the environment and therefore their representation of uncertainty crucially depend on the integration of data over time. As such, the extent to which past events are used to represent uncertainty has been postulated to vary over the cortex. For example, primary visual cortex responds to rapid perturbations in the environment, while frontal cortices involved in executive control encode the longer term contexts within which these perturbations occur. Here we tested whether primary and executive regions can be distinguished by the number of past observations they represent. This was based on a decay-dependent model that weights past observations from a Markov process and Bayesian Model Selection (BMS to test the prediction that neuronal responses are characterised by different decay half-lives depending on location in the brain. We show distributions of brain responses for short and long term decay functions in primary and secondary visual and frontal cortices, respectively. We found that visual and parietal responses are released from the burden of the past, enabling an agile response to fluctuations in events as they unfold. In contrast, frontal regions are more concerned with average trends over longer time scales within which local variations are embedded. Specifically, we provide evidence for a temporal gradient for representing context within the prefrontal cortex and possibly beyond to include primary sensory and association areas.

  1. Incorporating tree-thinking and evolutionary time scale into developmental biology.

    Science.gov (United States)

    Kuraku, Shigehiro; Feiner, Nathalie; Keeley, Sean D; Hara, Yuichiro

    2016-01-01

    Phylogenetic approaches are indispensable in any comparative molecular study involving multiple species. These approaches are in increasing demand as the amount and availability of DNA sequence information continues to increase exponentially, even for organisms that were previously not extensively studied. Without the sound application of phylogenetic concepts and knowledge, one can be misled when attempting to infer ancestral character states as well as the timing and order of evolutionary events, both of which are frequently exerted in evolutionary developmental biology. The ignorance of phylogenetic approaches can also impact non-evolutionary studies and cause misidentification of the target gene or protein to be examined in functional characterization. This review aims to promote tree-thinking in evolutionary conjecture and stress the importance of a sense of time scale in cross-species comparisons, in order to enhance the understanding of phylogenetics in all biological fields including developmental biology. To this end, molecular phylogenies of several developmental regulatory genes, including those denoted as "cryptic pan-vertebrate genes", are introduced as examples. © 2016 Japanese Society of Developmental Biologists.

  2. Multiplexing topologies and time scales: The gains and losses of synchrony

    Science.gov (United States)

    Makovkin, Sergey; Kumar, Anil; Zaikin, Alexey; Jalan, Sarika; Ivanchenko, Mikhail

    2017-11-01

    Inspired by the recent interest in collective dynamics of biological neural networks immersed in the glial cell medium, we investigate the frequency and phase order, i.e., Kuramoto type of synchronization in a multiplex two-layer network of phase oscillators of different time scales and topologies. One of them has a long-range connectivity, exemplified by the Erdős-Rényi random network, and supports both kinds of synchrony. The other is a locally coupled two-dimensional lattice that can reach frequency synchronization but lacks phase order. Drastically different layer frequencies disentangle intra- and interlayer synchronization. We find that an indirect but sufficiently strong coupling through the regular layer can induce both phase order in the originally nonsynchronized random layer and global order, even when an isolated regular layer does not manifest it in principle. At the same time, the route to global synchronization is complex: an initial onset of (partial) synchrony in the regular layer, when its intra- and interlayer coupling is increased, provokes the loss of synchrony even in the originally synchronized random layer. Ultimately, a developed asynchronous dynamics in both layers is abruptly taken over by the global synchrony of both kinds.

  3. Real-time monitoring of emissions from monoethanolamine-based industrial scale carbon capture facilities.

    Science.gov (United States)

    Zhu, Liang; Schade, Gunnar Wolfgang; Nielsen, Claus Jørgen

    2013-12-17

    We demonstrate the capabilities and properties of using Proton Transfer Reaction time-of-flight mass spectrometry (PTR-ToF-MS) to real-time monitor gaseous emissions from industrial scale amine-based carbon capture processes. The benchmark monoethanolamine (MEA) was used as an example of amines needing to be monitored from carbon capture facilities, and to describe how the measurements may be influenced by potentially interfering species in CO2 absorber stack discharges. On the basis of known or expected emission compositions, we investigated the PTR-ToF-MS MEA response as a function of sample flow humidity, ammonia, and CO2 abundances, and show that all can exhibit interferences, thus making accurate amine measurements difficult. This warrants a proper sample pretreatment, and we show an example using a dilution with bottled zero air of 1:20 to 1:10 to monitor stack gas concentrations at the CO2 Technology Center Mongstad (TCM), Norway. Observed emissions included many expected chemical species, dominantly ammonia and acetaldehyde, but also two new species previously not reported but emitted in significant quantities. With respect to concerns regarding amine emissions, we show that accurate amine quantifications in the presence of water vapor, ammonia, and CO2 become feasible after proper sample dilution, thus making PTR-ToF-MS a viable technique to monitor future carbon capture facility emissions, without conventional laborious sample pretreatment.

  4. Saharan Dust Deposition May Affect Phytoplankton Growth in the Mediterranean Sea at Ecological Time Scales

    Science.gov (United States)

    Gallisai, Rachele; Peters, Francesc; Volpe, Gianluca; Basart, Sara; Baldasano, José Maria

    2014-01-01

    The surface waters of the Mediterranean Sea are extremely poor in the nutrients necessary for plankton growth. At the same time, the Mediterranean Sea borders with the largest and most active desert areas in the world and the atmosphere over the basin is subject to frequent injections of mineral dust particles. We describe statistical correlations between dust deposition over the Mediterranean Sea and surface chlorophyll concentrations at ecological time scales. Aerosol deposition of Saharan origin may explain 1 to 10% (average 5%) of seasonally detrended chlorophyll variability in the low nutrient-low chlorophyll Mediterranean. Most of the statistically significant correlations are positive with main effects in spring over the Eastern and Central Mediterranean, conforming to a view of dust events fueling needed nutrients to the planktonic community. Some areas show negative effects of dust deposition on chlorophyll, coinciding with regions under a large influence of aerosols from European origin. The influence of dust deposition on chlorophyll dynamics may become larger in future scenarios of increased aridity and shallowing of the mixed layer. PMID:25333783

  5. From dinosaurs to modern bird diversity: extending the time scale of adaptive radiation.

    Science.gov (United States)

    Moen, Daniel; Morlon, Hélène

    2014-05-01

    What explains why some groups of organisms, like birds, are so species rich? And what explains their extraordinary ecological diversity, ranging from large, flightless birds to small migratory species that fly thousand of kilometers every year? These and similar questions have spurred great interest in adaptive radiation, the diversification of ecological traits in a rapidly speciating group of organisms. Although the initial formulation of modern concepts of adaptive radiation arose from consideration of the fossil record, rigorous attempts to identify adaptive radiation in the fossil record are still uncommon. Moreover, most studies of adaptive radiation concern groups that are less than 50 million years old. Thus, it is unclear how important adaptive radiation is over temporal scales that span much larger portions of the history of life. In this issue, Benson et al. test the idea of a "deep-time" adaptive radiation in dinosaurs, compiling and using one of the most comprehensive phylogenetic and body-size datasets for fossils. Using recent phylogenetic statistical methods, they find that in most clades of dinosaurs there is a strong signal of an "early burst" in body-size evolution, a predicted pattern of adaptive radiation in which rapid trait evolution happens early in a group's history and then slows down. They also find that body-size evolution did not slow down in the lineage leading to birds, hinting at why birds survived to the present day and diversified. This paper represents one of the most convincing attempts at understanding deep-time adaptive radiations.

  6. Study of Volcanic Activity at Different Time Scales Using Hypertemporal Land Surface Temperature Data

    Science.gov (United States)

    Pavlidou, Efthymia; Hecker, Christoph; van der Werff, Harald; van der Meijde, Mark

    2017-10-01

    We apply a method for detecting subtle spatiotemporal signal fluctuations to monitor volcanic activity. Whereas midwave infrared data are commonly used for volcanic hot spot detection, our approach utilizes hypertemporal longwave infrared-based land surface temperature (LST) data. Using LST data of the second-generation European Meteorological Satellites, we study (a) a paroxysmal, 1 day long eruption of Mount Etna (Italy); (b) a prolonged, 6 month period of effusive and lateral lava flows of the Nyamuragira volcano (Democratic Republic of Congo); and (c) intermittent activity in the permanent lava lake of Nyiragongo (Democratic Republic of Congo) over a period of 2 years (2011-2012). We compare our analysis with published ground-based observations and satellite-based alert systems; results agree on the periods of increased volcanic activity and quiescence. We further apply our analysis on mid-infrared and long-infrared brightness temperatures and compare the results. We conclude that our study enables the use of LST data for monitoring volcanic dynamics at different time scales, can complement existing methodologies, and allows for use of long time series from older sensors that do not provide midwave infrared data.

  7. Real-World-Time Simulation of Memory Consolidation in a Large-Scale Cerebellar Model.

    Science.gov (United States)

    Gosui, Masato; Yamazaki, Tadashi

    2016-01-01

    We report development of a large-scale spiking network model of the cerebellum composed of more than 1 million neurons. The model is implemented on graphics processing units (GPUs), which are dedicated hardware for parallel computing. Using 4 GPUs simultaneously, we achieve realtime simulation, in which computer simulation of cerebellar activity for 1 s completes within 1 s in the real-world time, with temporal resolution of 1 ms. This allows us to carry out a very long-term computer simulation of cerebellar activity in a practical time with millisecond temporal resolution. Using the model, we carry out computer simulation of long-term gain adaptation of optokinetic response (OKR) eye movements for 5 days aimed to study the neural mechanisms of posttraining memory consolidation. The simulation results are consistent with animal experiments and our theory of posttraining memory consolidation. These results suggest that realtime computing provides a useful means to study a very slow neural process such as memory consolidation in the brain.

  8. Synaptic plasticity and neuronal refractory time cause scaling behaviour of neuronal avalanches

    Science.gov (United States)

    Michiels van Kessenich, L.; de Arcangelis, L.; Herrmann, H. J.

    2016-08-01

    Neuronal avalanches measured in vitro and in vivo in different cortical networks consistently exhibit power law behaviour for the size and duration distributions with exponents typical for a mean field self-organized branching process. These exponents are also recovered in neuronal network simulations implementing various neuronal dynamics on different network topologies. They can therefore be considered a very robust feature of spontaneous neuronal activity. Interestingly, this scaling behaviour is also observed on regular lattices in finite dimensions, which raises the question about the origin of the mean field behavior observed experimentally. In this study we provide an answer to this open question by investigating the effect of activity dependent plasticity in combination with the neuronal refractory time in a neuronal network. Results show that the refractory time hinders backward avalanches forcing a directed propagation. Hebbian plastic adaptation plays the role of sculpting these directed avalanche patterns into the topology of the network slowly changing it into a branched structure where loops are marginal.

  9. The spatially resolved star formation history of CALIFA galaxies. Cosmic time scales

    Science.gov (United States)

    García-Benito, R.; González Delgado, R. M.; Pérez, E.; Cid Fernandes, R.; Cortijo-Ferrero, C.; López Fernández, R.; de Amorim, A. L.; Lacerda, E. A. D.; Vale Asari, N.; Sánchez, S. F.

    2017-12-01

    This paper presents the mass assembly time scales of nearby galaxies observed by CALIFA at the 3.5 m telescope in Calar Alto. We apply the fossil record method of the stellar populations to the complete sample of the 3rd CALIFA data release, with a total of 661 galaxies, covering stellar masses from 108.4 to 1012M⊙ and a wide range of Hubble types. We apply spectral synthesis techniques to the datacubes and process the results to produce the mass growth time scales and mass weighted ages, from which we obtain temporal and spatially resolved information in seven bins of galaxy morphology (E, S0, Sa, Sb, Sc, and Sd) and six bins of stellar mass and stellar mass surface density. We use three different tracers of the spatially resolved star formation history (mass assembly curves, ratio of half mass to half light radii, and mass-weighted age gradients) to test if galaxies grow inside-out, and its dependence with galaxy stellar mass, stellar mass surface density, and morphology. Our main results are as follows: (a) the innermost regions of galaxies assemble their mass at an earlier time than regions located in the outer parts; this happens at any given stellar mass (M⋆), stellar mass surface density (Σ⋆), or Hubble type, including the lowest mass systems in our sample. (b) Galaxies present a significant diversity in their characteristic formation epochs for lower-mass systems. This diversity shows a strong dependence of the mass assembly time scales on Σ⋆ and Hubble type in the lower-mass range (108.4 to 1010.4), but a very mild dependence in higher-mass bins. (c) The lowest half mass radius (HMR) to half light radius (HLR) ratio is found for galaxies between 1010.4 and 1011.1M⊙, where galaxies are 25% smaller in mass than in light. Low-mass galaxies show the largest ratio with HMR/HLR 0.89. Sb and Sbc galaxies present the lowest HMR/HLR ratio (0.74). The ratio HMR/HLR is always, on average, below 1, indicating that galaxies grow faster in mass than in light

  10. Disassembly of the actin network inhibits insulin-dependent stimulation of glucose transport and prevents recruitment of glucose transporters to the plasma membrane.

    Science.gov (United States)

    Tsakiridis, T; Vranic, M; Klip, A

    1994-11-25

    In muscle and fat tissues, insulin stimulates glucose transport through the translocation of glucose transporter proteins from an intracellular storage pool to the plasma membrane. The mechanism of this translocation is unknown. We have examined the possible role of the actin microfilament network in the stimulation of glucose transport by insulin and on the distribution of glucose transporters, in differentiated L6 rat skeletal muscle cells. Insulin (10(-7) M for 30 min) caused a major reorganization of the actin network of differentiated L6 myotubes. Cytochalasin D, a widely used inhibitor of actin filament formation, caused a dose- and time-dependent disassembly of the actin network, which was associated with an 80% inhibition of the insulin stimulation of glucose transport, without affecting the basal rate of glucose uptake. L6 myotubes express three glucose transporter isoforms, named GLUT1, GLUT3, and GLUT4. Disassembly of the actin network by cytochalasin D did not affect the number of basal glucose transporters in the plasma membrane but reduced the content of all three glucose transporters in intracellular membranes and prevented their appearance at the plasma membrane response to insulin. The inhibitory effect of cytochalasin D treatment on the insulin stimulation of glucose transport occurred downstream of tyrosine phosphorylation of the insulin receptor substrate-1 and of binding of phosphatidylinositol 3-kinase to the insulin receptor substrate-1. Using immunoprecipitation of intact membranes, we detected specific association of the actin-binding protein spectrin with GLUT4 glucose transporter-containing vesicles. We conclude that an intact actin network is required for the correct intracellular localization of glucose transporters, as well as for their incorporation into the plasma membrane in response to insulin. A direct interaction may exist between the actin network and the glucose transporter vesicles which may be mediated through a spectrin

  11. Energy scale of inflation from the recurrence time of the universe

    Science.gov (United States)

    Ropotenko, K.

    2015-01-01

    It is shown that the de Sitter equilibrium cosmology predicts the energy scale of inflation that significantly exceeds the Planck scale. An alternative calculation of the probability for a fluctuation into an inflationary universe is proposed which gives a more realistic energy scale of inflation. An interpretation of the cosmological constant problem in the de Sitter equilibrium cosmology is briefly discussed.

  12. Assessing Time Management Skills as an Important Aspect of Student Learning: The Construction and Evaluation of a Time Management Scale with Spanish High School Students

    Science.gov (United States)

    Garcia-Ros, Rafael; Perez-Gonzalez, Francisco; Hinojosa, Eugenia

    2004-01-01

    The main purpose of this study is to analyse the factorial structure, psychometric properties and predictive capacity for academic achievement of a scale designed to evaluate the time management skills of Spanish high school students. An adaptation of the Time Management Questionnaire was presented to two samples of 350 Spanish high school…

  13. Time scales for fusion-fission and quasifission from giant dipole resonance decay

    Science.gov (United States)

    Butsch, R.; Hofman, D. J.; Montoya, C. P.; Paul, P.; Thoennessen, M.

    1991-10-01

    Giant dipole resonance (GDR) γ rays in coincidence with fission fragments were measured in the reactions 16O+208Pb at 120 and 140 MeV, 24Mg+196Pt at 150 MeV, and 32S+natW at 185 MeV. γ-ray-fission angular correlation measurements for 16O+208Pb (120 and 140 MeV) and 32S+natW confirm the strong contribution of prescission γ rays to the total γ-ray spectrum. The data were analyzed with a modified statistical model code which includes the effects of nuclear dissipation in the fission process, γ decay at equilibrium and between saddle and scission, and the decay of the mononucleus formed in quasifission reactions. The extracted value for the nuclear friction coefficient of γ=10+/-3 at temperatures between 1 and 2 MeV is much larger than the upper limit for the ground state and indicates strongly overdamped large-scale mass motion. The extracted total fission time scale τfiss(γ=10)~=2.9×10-19 s at 64 MeV excitation energy agrees with that extracted from recent neutron multiplicity experiments. A strong dependence of the GDR γ-ray yield on the target-projectile mass asymmetry is interpreted in terms of the quasifission process. γ-ray spectra and correlations could be fitted with the assumption of a GDR contribution from the mononucleus but required an arbitrary reduction of the total fission fragment excitation energy by 30 MeV. The quasifission lifetime was estimated to τqf=(2-9)×10-20 s.

  14. Geospatial Data as a Service: Towards planetary scale real-time analytics

    Science.gov (United States)

    Evans, B. J. K.; Larraondo, P. R.; Antony, J.; Richards, C. J.

    2017-12-01

    The rapid growth of earth systems, environmental and geophysical datasets poses a challenge to both end-users and infrastructure providers. For infrastructure and data providers, tasks like managing, indexing and storing large collections of geospatial data needs to take into consideration the various use cases by which consumers will want to access and use the data. Considerable investment has been made by the Earth Science community to produce suitable real-time analytics platforms for geospatial data. There are currently different interfaces that have been defined to provide data services. Unfortunately, there is considerable difference on the standards, protocols or data models which have been designed to target specific communities or working groups. The Australian National University's National Computational Infrastructure (NCI) is used for a wide range of activities in the geospatial community. Earth observations, climate and weather forecasting are examples of these communities which generate large amounts of geospatial data. The NCI has been carrying out significant effort to develop a data and services model that enables the cross-disciplinary use of data. Recent developments in cloud and distributed computing provide a publicly accessible platform where new infrastructures can be built. One of the key components these technologies offer is the possibility of having "limitless" compute power next to where the data is stored. This model is rapidly transforming data delivery from centralised monolithic services towards ubiquitous distributed services that scale up and down adapting to fluctuations in the demand. NCI has developed GSKY, a scalable, distributed server which presents a new approach for geospatial data discovery and delivery based on OGC standards. We will present the architecture and motivating use-cases that drove GSKY's collaborative design, development and production deployment. We show our approach offers the community valuable exploratory

  15. Determination of paleoseismic activity over a large time-scale: Fault scarp dating with 36Cl

    Science.gov (United States)

    Mozafari Amiri, Nasim; Tikhomirov, Dmitry; Sümer, Ökmen; Özkaymak, Çaǧlar; Uzel, Bora; Ivy-Ochs, Susan; Vockenhuber, Christof; Sözbilir, Hasan; Akçar, Naki

    2016-04-01

    Bedrock fault scarps are the most direct evidence of past earthquakes to reconstruct seismic activity in a large time-scale using cosmogenic 36Cl dating if built in carbonates. For this method, a surface along the fault scarp with a minimum amount of erosion is required to be chosen as an ideal target point. The section of the fault selected for sampling should cover at least two meters of the fault surface from the lower part of the scarp, where intersects with colluvium wedge. Ideally, sampling should be performed on a continuous strip along the direction of the fault slip direction. First, samples of 10 cm high and 15 cm wide are marked on the fault surface. Then, they are collected using cutters, hammer and chisel in a thickness of 3 cm. The main geometrical factors of scarp dip, scarp height, top surface dip and colluvium dip are also measured. Topographic shielding in the sampling spot is important to be estimated as well. Moreover, density of the fault scarp and colluvium are calculated. The physical and chemical preparations are carried in laboratory for AMS and chemical analysis of the samples. A Matlab® code is used for modelling of seismically active periods based on increasing production rate of 36Cl following each rupture, when a buried section of a fault is exposed. Therefore, by measuring the amount of cosmogenic 36Cl versus height, the timing of major ruptures and their offsets are determined. In our study, Manastır, Mugırtepe and Rahmiye faults in Gediz graben, Priene-Sazlı, Kalafat and Yavansu faults in Büyük Menderes graben and Ören fault in Gökava half-graben have been examined in the seismically active region of Western Turkey. Our results reconstruct at least five periods of high seismic activity during the Holocene time, three of which reveal seismic ruptures beyond the historical pre-existing data.

  16. Is there a connection between Earth's core and climate at multidecadal time scales?

    Science.gov (United States)

    Lambert, Sébastien; Marcus, Steven; de Viron, Olivier

    2017-04-01

    The length-of-day (LOD) undergoes multidecadal variations of several milliseconds (ms) attributed to changes in the fluid outer core angular momentum. These variations resemble a quasi-periodic oscillation of duration 60 to 70 years, although the periodicity (and its accurate length) are disputable because of the relatively short observational time span and the lower quality of the observations before the 20th century. Interestingly, similar variations show up in various measured or reconstructed climate indices including the sea surface (SST) and surface air (SAT) temperatures. It has been shown in several studies that LOD variations lead SST and SAT variations by a few years. No clear scenarios have been raised so far to explain the link between external, astronomical forcing (e.g., Solar wind), Earth's rotation (core-driven torsional) oscillations, and Earth's surface processes (climate variations) at these time scales. Accumulating evidence, however, suggests the centrifugal tides generated by multidecadal LOD variations as a 'valve' to control the transfer of thermal energy from the lithosphere to the surface via geothermal fluxes. This hypothesis is supported by recent studies reporting significant correlations between tidal and rotational excitation and seafloor and surface volcanism. In this study, we extend recent works from us and other independent authors by re-assessing the correlations between multidecadal LOD, climate indices, Solar and magnetic activities, as well as gridded data including SST, SAT, and cloud cover. We pay a special attention to the time lags: when a significant correlation is found, the value of the lag may help to discriminate between various possible scenarios. We locate some `hot spots', particularly in the Atlantic ocean and along the trajectory of the upper branch of the Atlantic meridional overturning circulation (AMOC), where the 70-yr oscillation is strongly marked. In addition, we discuss the possibility for centrifugal

  17. Optimization of Signal Timing of Intersections by Internal Metering of Queue Time Ratio of Vehicles in Network Scale

    Directory of Open Access Journals (Sweden)

    Mina Ghanbarikarekani

    2016-06-01

    Full Text Available Optimization of signal timing in urban network is usually done by minimizing the delay times or queue lengths. Sincethe effect of each intersection on the whole network is not considered in the mentioned methods, traffic congestion may occur in network links. Therefore, this paper has aimed to provide a timing optimization algorithm for traffic signals using internal timing policy based on balancing queue time ratio of vehicles in network links. In the proposed algorithm, the difference between the real queue time ratio and the optimum one for each link of intersection was minimized. To evaluate the efficiency of the proposed algorithm on traffic performance, the proposed algorithm was applied in a hypothetical network. By comparing the simulating software outputs, before and after implementing the algorithm, it was concluded that the queue time ratio algorithm has improved the traffic parameters by increasing the flow as well as reducing the delay time and density of the network.

  18. Farmer response to climatic and agricultural market drivers: characteristic time scales and sensitivities

    Science.gov (United States)

    Wurster, P. M.; Maneta, M. P.; Vicente-Serrano, S. M.; Beguería, S.; Silverman, N. L.; Holden, Z.

    2017-12-01

    Agriculture in the intermountain western United States is dominated by extensive farming and ranching, mostly reliant on rainfed crops and therefore very exposed to precipitation shortfalls. It is also poorly diversified, dominated by five or six major grain crops, which makes it vulnerable to changes in agricultural markets. The economy of the region is very reliant on this type of agriculture, making the entire economy vulnerable to climatic and market fluctuations. Western agriculture is also of significant importance for national food security. Resource managers in the region are increasingly concerned with the impacts that more frequent and severe droughts, or the collapse of crop prices, may have on producers and food production. Effective resource management requires an understanding not only of the regional impact of adverse climatic and market events, but also of which geographic areas are most vulnerable, and why. Unfortunately, few studies exist that look into how farmers in different geographic areas respond to climate and market drivers. In this study we analyze the influence of precipitation and crop price anomalies on crop production, and map the characteristic time scale of these anomalies that correlate best with production anomalies for the 56 counties of Montana, U.S.A. We conduct this analysis using the standardized precipitation index (SPI), and defining a standardized crop value index (SCVI) and a standardized crop production index (SCPI). We use 38 years of data to calculate precipitation anomalies at monthly time scales and annual data to calculate crop price and production anomalies. The standardization of the indices allows for straightforward comparison of the relative influence of climatic and market fluctuations on production anomalies. We apply our methodology to winter wheat, spring durum wheat, barley, alfalfa, and beets which are the most valuable crops produced in the state. Results from this study show that precipitation anomalies

  19. A rainfall disaggregation scheme for sub-hourly time scales: Coupling a Bartlett-Lewis based model with adjusting procedures

    Science.gov (United States)

    Kossieris, Panagiotis; Makropoulos, Christos; Onof, Christian; Koutsoyiannis, Demetris

    2018-01-01

    Many hydrological applications, such as flood studies, require the use of long rainfall data at fine time scales varying from daily down to 1 min time step. However, in the real world there is limited availability of data at sub-hourly scales. To cope with this issue, stochastic disaggregation techniques are typically employed to produce possible, statistically consistent, rainfall events that aggregate up to the field data collected at coarser scales. A methodology for the stochastic disaggregation of rainfall at fine time scales was recently introduced, combining the Bartlett-Lewis process to generate rainfall events along with adjusting procedures to modify the lower-level variables (i.e., hourly) so as to be consistent with the higher-level one (i.e., daily). In the present paper, we extend the aforementioned scheme, initially designed and tested for the disaggregation of daily rainfall into hourly depths, for any sub-hourly time scale. In addition, we take advantage of the recent developments in Poisson-cluster processes incorporating in the methodology a Bartlett-Lewis model variant that introduces dependence between cell intensity and duration in order to capture the variability of rainfall at sub-hourly time scales. The disaggregation scheme is implemented in an R package, named HyetosMinute, to support disaggregation from daily down to 1-min time scale. The applicability of the methodology was assessed on a 5-min rainfall records collected in Bochum, Germany, comparing the performance of the above mentioned model variant against the original Bartlett-Lewis process (non-random with 5 parameters). The analysis shows that the disaggregation process reproduces adequately the most important statistical characteristics of rainfall at wide range of time scales, while the introduction of the model with dependent intensity-duration results in a better performance in terms of skewness, rainfall extremes and dry proportions.

  20. AGR-3/4 Irradiation Test Train Disassembly and Component Metrology First Look Report

    Energy Technology Data Exchange (ETDEWEB)

    Stempien, John Dennis [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rice, Francine Joyce [Idaho National Lab. (INL), Idaho Falls, ID (United States); Harp, Jason Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Winston, Philip Lon [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-03-01

    The AGR-3/4 experiment was designed to study fission product transport within graphitic matrix material and nuclear-grade graphite. To this end, this experiment consisted of 12 capsules, each fueled with 4 compacts containing UCO TRISO particles as driver fuel and 20 UCO designed-to-fail (DTF) fuel particles in each compact. The DTF fuel was fabricated with a thin pyrocarbon layer which was intended to fail during irradiation and provide a source of fission products. These fission products could then migrate through the compact and into the surrounding concentric rings of graphitic matrix material and/or nuclear graphite. Through post-irradiation examination (PIE) of the rings (including physical sampling and gamma scanning) fission product concentration profiles within the rings can be determined. These data can be used to elucidate fission product transport parameters (e.g. diffusion coefficients within the test materials) which will be used to inform and refine models of fission product transport. After irradiation in the Advanced Test Reactor (ATR) had been completed in April 2014, the AGR-3/4 experiment was shipped to the Hot Fuel Examination Facility (HFEF) at the Materials and Fuels Complex (MFC) for inspection, disassembly, and metrology. The AGR-3/4 test train was received at MFC in two separate shipments between February and April 2015. Visual examinations of the test train exterior did not indicate dimensional distortion, and only two small discolored areas were observed at the bottom of Capsules 8 and 9. No corresponding discoloration was found on the inside of these capsules, however. Prior to disassembly, the two test train sections were subject to analysis via the Precision Gamma Scanner (PGS), which did not indicate that any gross fuel relocation had occurred. A series of specialized tools (including clamps, cutters, and drills) had been designed and fabricated in order to carry out test train disassembly and recovery of capsule components (graphite