Shadow Education in Malaysia: Identifying the Determinants of Spending and Amount of Time Attending Private Supplementary Tutoring of Upper Secondary School Students

Directory of Open Access Journals (Sweden)

Chang Da Wan

2017-10-01

Full Text Available This paper examines the determinants of spending and the amount of time attending private supplementary tutoring, or commonly known as private tuition, in Malaysia. Based on 343 self-reported questionnaires with upper secondary students across three states in Malaysia and using multiple regression analysis, we identified ethnicity, father’s level of education and past academic performance as significant determinants of spending and amount of time attending private tuition. However, interestingly, we found that while geographical location and participation in internal tuition in schools were also determinants of spending, these two were not significant in determining the amount of time attending private supplementary tutoring. The identification of determinants of spending and amount of time, and in addition, the differences between these two illustrates the economic and educational dimensions of shadow education. More importantly, the insight also contributes to the formulation of possible interventions that can improve quality and reduce inequality in the mainstream education system.

Direct output feedback control of discrete-time systems

International Nuclear Information System (INIS)

Lin, C.C.; Chung, L.L.; Lu, K.H.

1993-01-01

An optimal direct output feedback control algorithm is developed for discrete-time systems with the consideration of time delay in control force action. Optimal constant output feedback gains are obtained through variational process such that certain prescribed quadratic performance index is minimized. Discrete-time control forces are then calculated from the multiplication of output measurements by these pre-calculated feedback gains. According to the proposed algorithm, structural system is assured to remain stable even in the presence of time delay. The number of sensors and controllers may be very small as compared with the dimension of states. Numerical results show that direct velocity feedback control is more sensitive to time delay than state feedback but, is still quite effective in reducing the dynamic responses under earthquake excitation. (author)

Effect of increased exposure times on amount of residual monomer released from single-step self-etch adhesives.

Science.gov (United States)

Altunsoy, Mustafa; Botsali, Murat Selim; Tosun, Gonca; Yasar, Ahmet

2015-10-16

The aim of this study was to evaluate the effect of increased exposure times on the amount of residual Bis-GMA, TEGDMA, HEMA and UDMA released from single-step self-etch adhesive systems. Two adhesive systems were used. The adhesives were applied to bovine dentin surface according to the manufacturer's instructions and were polymerized using an LED curing unit for 10, 20 and 40 seconds (n = 5). After polymerization, the specimens were stored in 75% ethanol-water solution (6 mL). Residual monomers (Bis-GMA, TEGDMA, UDMA and HEMA) that were eluted from the adhesives (after 10 minutes, 1 hour, 1 day, 7 days and 30 days) were analyzed by high-performance liquid chromatography (HPLC). The data were analyzed using 1-way analysis of variance and Tukey HSD tests. Among the time periods, the highest amount of released residual monomers from adhesives was observed in the 10th minute. There were statistically significant differences regarding released Bis-GMA, UDMA, HEMA and TEGDMA between the adhesive systems (p<0.05). There were no significant differences among the 10, 20 and 40 second polymerization times according to their effect on residual monomer release from adhesives (p>0.05). Increasing the polymerization time did not have an effect on residual monomer release from single-step self-etch adhesives.

Comparing fixed-amount and progressive-amount DRO Schedules for tic suppression in youth with chronic tic disorders.

Science.gov (United States)

Capriotti, Matthew R; Turkel, Jennifer E; Johnson, Rachel A; Espil, Flint M; Woods, Douglas W

2017-01-01

Chronic tic disorders (CTDs) involve motor and/or vocal tics that often cause substantial distress and impairment. Differential reinforcement of other behavior (DRO) schedules of reinforcement produce robust, but incomplete, reductions in tic frequency in youth with CTDs; however, a more robust reduction may be needed to affect durable clinical change. Standard, fixed-amount DRO schedules have not commonly yielded such reductions, so we evaluated a novel, progressive-amount DRO schedule, based on its ability to facilitate sustained abstinence from functionally similar behaviors. Five youth with CTDs were exposed to periods of baseline, fixed-amount DRO (DRO-F), and progressive-amount DRO (DRO-P). Both DRO schedules produced decreases in tic rate and increases in intertic interval duration, but no systematic differences were seen between the two schedules on any dimension of tic occurrence. The DRO-F schedule was generally preferred to the DRO-P schedule. Possible procedural improvements and other future directions are discussed. © 2016 Society for the Experimental Analysis of Behavior.

Relationship between Amount of Exited Blood During Wet-cupping with Patient’s Individual Conditions and the Time of Doing it

Directory of Open Access Journals (Sweden)

Ghazanfari M

2017-12-01

Full Text Available Aims Wet-cupping as a therapeutic method has been recommended to be done on certain days based on authentic sources of traditional medicine in Iran. The purpose of this study was to determine the relationship between amount of exited blood during wet-cupping with patient’s individual conditions and the time it was performed. Instruments & Methods In this descriptive cross-sectional study, 391 men who were referred to a cupping center in Saveh city in the spring of 2016, were selected by simple sampling and wet-cupping in the position between the two scapula was performed. The research instrument was a questionnaire including demographic characteristics, date of reference (day, month and year, age, height, weight and amount of exited blood during the wet-cupping in gram. Data were analyzed by SPSS 16 software and using chi-square test, paired t test and one-way analysis of variance. Findings The means of age, weight and body mass index were significantly related to the mean of amount of exited blood during wet-cupping (p0.05, but the amount of exited blood was higher in people with previous history of wet-cupping than those without previous history (p<0.001. Also, in people with hypertension, the amount of exited blood was higher than other treatment groups (p<0.05. Conclusion Individual characteristics such as age, weight, body mass index, cause of referral and previous history of wet-cupping affect the amount of exited blood during wet-cupping, but the time of wet-cupping (day and month does not affect the amount of exited blood.

Shadow Education in Malaysia: Identifying the Determinants of Spending and Amount of Time Attending Private Supplementary Tutoring of Upper Secondary School Students

OpenAIRE

Chang Da Wan; Benedict Weerasena

2017-01-01

This paper examines the determinants of spending and the amount of time attending private supplementary tutoring, or commonly known as private tuition, in Malaysia. Based on 343 self-reported questionnaires with upper secondary students across three states in Malaysia and using multiple regression analysis, we identified ethnicity, father’s level of education and past academic performance as significant determinants of spending and amount of time attending private tuition. However, interestin...

Separating Direct and Indirect Turbofan Engine Combustion Noise While Estimating Post-Combustion (Post-Flame) Residence Time Using the Correlation Function

Science.gov (United States)

Miles, Jeffrey Hilton

2011-01-01

A previous investigation on the presence of direct and indirect combustion noise for a full-scale turbofan engine using a far-field microphone at 130 is extended by also examining signals obtained at two additional downstream directions using far-field microphones at 110 deg and 160 deg. A generalized cross-correlation function technique is used to study the change in propagation time to the far field of the combined direct and indirect combustion noise signal as a sequence of low-pass filters are applied. The filtering procedure used produces no phase distortion. As the low-pass filter frequency is decreased, the travel time increases because the relative amount of direct combustion noise is reduced. The indirect combustion noise signal travels more slowly because in the combustor entropy fluctuations move with the flow velocity, which is slow compared to the local speed of sound. The indirect combustion noise signal travels at acoustic velocities after reaching the turbine and being converted into an acoustic signal. The direct combustion noise is always propagating at acoustic velocities. The results show that the estimated indirect combustion noise time delay values (post-combustion residence times) measured at each angle are fairly consistent with one another for a relevant range of operating conditions and demonstrate source separation of a mixture of direct and indirect combustion noise. The results may lead to a better idea about the acoustics in the combustor and may help develop and validate improved reduced-order physics-based methods for predicting turbofan engine core noise.

Direct time-domain techniques for transient radiation and scattering

International Nuclear Information System (INIS)

Miller, E.K.; Landt, J.A.

1976-01-01

A tutorial introduction to transient electromagnetics, focusing on direct time-domain techniques, is presented. Physical, mathematical, numerical, and experimental aspects of time-domain methods, with emphasis on wire objects excited as antennas or scatters are examined. Numerous computed examples illustrate the characteristics of direct time-domain procedures, especially where they may offer advantages over procedures in the more familiar frequency domain. These advantages include greater solution efficiency for many types of problems, the ability to handle nonlinearities, improved physical insight and interpretability, availability of wide-band information from a single calculation, and the possibility of isolating interactions among various parts of an object using time-range gating

Influence of the timing of cardiac catheterization and amount of contrast media on acute renal failure after cardiac surgery

Directory of Open Access Journals (Sweden)

Mohsen Mirmohammad Sadeghi

2011-01-01

Full Text Available Background: There is limited data about the influence of timing of cardiac surgery in relation to diagnostic angiography and/or the impact of the amount of contrast media used during angiography on the occurance of acute renal failure (ARF. Therefore, in the present study the effect of the time interval between diagnostic angiography and cardiac surgery and also the amount of contrast media used during the diagnostic procedure on the incidence of ARF after cardiac surgery was investigated. Methods: Data of 1177 patients who underwent different types of cardiac surgeries after cardiac catheterization were prospectively examined. The influence of time interval between cardiac catheterization and surgery as well as the amount of contrast agent on postoperative ARF were assessed using multivariable logistic regression. Results: The patients who progressed to ARF were more likely to have received a higher dose of contrast agent compared to the mean dose. However, the time interval between cardiac surgery and last catheterization was not significantly different between the patients with and without ARF (p = 0.05. Overall, postoperative peak creatinine was highest on day 0, then decreased and remained significantly unchanged after this period. Overall prevalence of acute renal failure during follow-up period had a changeable trend and had the highest rates in days 1 (53.57% and 6 (52.17% after surgery. Combined coronary bypass and valve surgery were the strongest predictor of postoperative ARF (OR: 4.976, CI = 1.613-15.355 and p = 0.002, followed by intra-aortic balloon pump insertion (OR: 6.890, CI = 1.482-32.032 and p = 0.009 and usage of higher doses of contrast media agent (OR: 1.446, CI = 1.033-2.025 and p = 0.031. Conclusions: Minimizing the amount of contrast agent has a potential role in reducing the incidence of postoperative ARF in patients undergoing cardiac surgery, but delaying cardiac surgery after exposure to these agents might not have

Influence of the timing of cardiac catheterization and amount of contrast media on acute renal failure after cardiac surgery.

Science.gov (United States)

Sadeghi, Mohsen Mirmohammad; Gharipour, Mojgan; Nilforoush, Peiman; Shamsolkotabi, Hamid; Sadeghi, Hamid Mirmohammad; Kiani, Amjad; Sadeghi, Pouya Mirmohammad; Farahmand, Niloufar

2011-04-01

There is limited data about the influence of timing of cardiac surgery in relation to diagnostic angiography and/or the impact of the amount of contrast media used during angiography on the occurance of acute renal failure (ARF). Therefore, in the present study the effect of the time interval between diagnostic angiography and cardiac surgery and also the amount of contrast media used during the diagnostic procedure on the incidence of ARF after cardiac surgery was investigated. Data of 1177 patients who underwent different types of cardiac surgeries after cardiac catheterization were prospectively examined. The influence of time interval between cardiac catheterization and surgery as well as the amount of contrast agent on postoperative ARF were assessed using multivariable logistic regression. The patients who progressed to ARF were more likely to have received a higher dose of contrast agent compared to the mean dose. However, the time interval between cardiac surgery and last catheterization was not significantly different between the patients with and without ARF (p = 0.05). Overall, postoperative peak creatinine was highest on day 0, then decreased and remained significantly unchanged after this period. Overall prevalence of acute renal failure during follow-up period had a changeable trend and had the highest rates in days 1 (53.57%) and 6 (52.17%) after surgery. Combined coronary bypass and valve surgery were the strongest predictor of postoperative ARF (OR: 4.976, CI = 1.613-15.355 and p = 0.002), followed by intra-aortic balloon pump insertion (OR: 6.890, CI = 1.482-32.032 and p = 0.009) and usage of higher doses of contrast media agent (OR: 1.446, CI = 1.033-2.025 and p = 0.031). Minimizing the amount of contrast agent has a potential role in reducing the incidence of postoperative ARF in patients undergoing cardiac surgery, but delaying cardiac surgery after exposure to these agents might not have this protective effect.

Direct Characterization of Ultrafast Energy-Time Entangled Photon Pairs.

Science.gov (United States)

MacLean, Jean-Philippe W; Donohue, John M; Resch, Kevin J

2018-02-02

Energy-time entangled photons are critical in many quantum optical phenomena and have emerged as important elements in quantum information protocols. Entanglement in this degree of freedom often manifests itself on ultrafast time scales, making it very difficult to detect, whether one employs direct or interferometric techniques, as photon-counting detectors have insufficient time resolution. Here, we implement ultrafast photon counters based on nonlinear interactions and strong femtosecond laser pulses to probe energy-time entanglement in this important regime. Using this technique and single-photon spectrometers, we characterize all the spectral and temporal correlations of two entangled photons with femtosecond resolution. This enables the witnessing of energy-time entanglement using uncertainty relations and the direct observation of nonlocal dispersion cancellation on ultrafast time scales. These techniques are essential to understand and control the energy-time degree of freedom of light for ultrafast quantum optics.

Generate tri-directional spectra-compatible time histories using HHT method

Energy Technology Data Exchange (ETDEWEB)

Li, Bo; Xie, Wei-Chau, E-mail: xie@uwaterloo.ca; Pandey, Mahesh D.

2016-11-15

Highlights: • Hilbert–Huang Transform are applied to modify real earthquake records. • Generate tri-directional time histories compatible with target spectra. • Both GRS and FRS are considered as target spectra. • Target spectra with multiple damping ratios are considered. - Abstract: This paper proposes two algorithms to generate spectrum-compatible time histories based on two approaches recommended by USNRC Standard Review Plan 3.7.1. Hilbert–Huang Transform technique is used to analyze frequency contents and amplitudes of seed motions. Through adjusting the frequency contents and amplitudes of seed motions, spectrum-compatible time histories are obtained. The first algorithm is to generate tri-directional time histories compatible with multi-damping target design spectra (ground response spectra or floor response spectra). The second algorithm is to generate tri-directional time histories compatible with single-damping target design spectra. Examples are presented to demonstrate versatility of these two proposed algorithms to generate spectra-compatible time histories.

Generate tri-directional spectra-compatible time histories using HHT method

International Nuclear Information System (INIS)

Li, Bo; Xie, Wei-Chau; Pandey, Mahesh D.

2016-01-01

Highlights: • Hilbert–Huang Transform are applied to modify real earthquake records. • Generate tri-directional time histories compatible with target spectra. • Both GRS and FRS are considered as target spectra. • Target spectra with multiple damping ratios are considered. - Abstract: This paper proposes two algorithms to generate spectrum-compatible time histories based on two approaches recommended by USNRC Standard Review Plan 3.7.1. Hilbert–Huang Transform technique is used to analyze frequency contents and amplitudes of seed motions. Through adjusting the frequency contents and amplitudes of seed motions, spectrum-compatible time histories are obtained. The first algorithm is to generate tri-directional time histories compatible with multi-damping target design spectra (ground response spectra or floor response spectra). The second algorithm is to generate tri-directional time histories compatible with single-damping target design spectra. Examples are presented to demonstrate versatility of these two proposed algorithms to generate spectra-compatible time histories.

Direct Measurements of Smartphone Screen-Time: Relationships with Demographics and Sleep.

Science.gov (United States)

Christensen, Matthew A; Bettencourt, Laura; Kaye, Leanne; Moturu, Sai T; Nguyen, Kaylin T; Olgin, Jeffrey E; Pletcher, Mark J; Marcus, Gregory M

2016-01-01

Smartphones are increasingly integrated into everyday life, but frequency of use has not yet been objectively measured and compared to demographics, health information, and in particular, sleep quality. The aim of this study was to characterize smartphone use by measuring screen-time directly, determine factors that are associated with increased screen-time, and to test the hypothesis that increased screen-time is associated with poor sleep. We performed a cross-sectional analysis in a subset of 653 participants enrolled in the Health eHeart Study, an internet-based longitudinal cohort study open to any interested adult (≥ 18 years). Smartphone screen-time (the number of minutes in each hour the screen was on) was measured continuously via smartphone application. For each participant, total and average screen-time were computed over 30-day windows. Average screen-time specifically during self-reported bedtime hours and sleeping period was also computed. Demographics, medical information, and sleep habits (Pittsburgh Sleep Quality Index-PSQI) were obtained by survey. Linear regression was used to obtain effect estimates. Total screen-time over 30 days was a median 38.4 hours (IQR 21.4 to 61.3) and average screen-time over 30 days was a median 3.7 minutes per hour (IQR 2.2 to 5.5). Younger age, self-reported race/ethnicity of Black and "Other" were associated with longer average screen-time after adjustment for potential confounders. Longer average screen-time was associated with shorter sleep duration and worse sleep-efficiency. Longer average screen-times during bedtime and the sleeping period were associated with poor sleep quality, decreased sleep efficiency, and longer sleep onset latency. These findings on actual smartphone screen-time build upon prior work based on self-report and confirm that adults spend a substantial amount of time using their smartphones. Screen-time differs across age and race, but is similar across socio-economic strata suggesting that

Direct Measurements of Smartphone Screen-Time: Relationships with Demographics and Sleep.

Directory of Open Access Journals (Sweden)

Matthew A Christensen

Full Text Available Smartphones are increasingly integrated into everyday life, but frequency of use has not yet been objectively measured and compared to demographics, health information, and in particular, sleep quality.The aim of this study was to characterize smartphone use by measuring screen-time directly, determine factors that are associated with increased screen-time, and to test the hypothesis that increased screen-time is associated with poor sleep.We performed a cross-sectional analysis in a subset of 653 participants enrolled in the Health eHeart Study, an internet-based longitudinal cohort study open to any interested adult (≥ 18 years. Smartphone screen-time (the number of minutes in each hour the screen was on was measured continuously via smartphone application. For each participant, total and average screen-time were computed over 30-day windows. Average screen-time specifically during self-reported bedtime hours and sleeping period was also computed. Demographics, medical information, and sleep habits (Pittsburgh Sleep Quality Index-PSQI were obtained by survey. Linear regression was used to obtain effect estimates.Total screen-time over 30 days was a median 38.4 hours (IQR 21.4 to 61.3 and average screen-time over 30 days was a median 3.7 minutes per hour (IQR 2.2 to 5.5. Younger age, self-reported race/ethnicity of Black and "Other" were associated with longer average screen-time after adjustment for potential confounders. Longer average screen-time was associated with shorter sleep duration and worse sleep-efficiency. Longer average screen-times during bedtime and the sleeping period were associated with poor sleep quality, decreased sleep efficiency, and longer sleep onset latency.These findings on actual smartphone screen-time build upon prior work based on self-report and confirm that adults spend a substantial amount of time using their smartphones. Screen-time differs across age and race, but is similar across socio-economic strata

A real-time monitoring and assessment method for calculation of total amounts of indoor air pollutants emitted in subway stations.

Science.gov (United States)

Oh, TaeSeok; Kim, MinJeong; Lim, JungJin; Kang, OnYu; Shetty, K Vidya; SankaraRao, B; Yoo, ChangKyoo; Park, Jae Hyung; Kim, Jeong Tai

2012-05-01

Subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, in this study, a new cumulative calculation method for the estimation of total amounts of indoor air pollutants emitted inside the subway station is proposed by taking cumulative amounts of indoor air pollutants based on integration concept. Minimum concentration of individual air pollutants which naturally exist in indoor space is referred as base concentration of air pollutants and can be found from the data collected. After subtracting the value of base concentration from data point of each data set of indoor air pollutant, the primary quantity of emitted air pollutant is calculated. After integration is carried out with these values, adding the base concentration to the integration quantity gives the total amount of indoor air pollutant emitted. Moreover the values of new index for cumulative indoor air quality obtained for 1 day are calculated using the values of cumulative air quality index (CAI). Cumulative comprehensive indoor air quality index (CCIAI) is also proposed to compare the values of cumulative concentrations of indoor air pollutants. From the results, it is clear that the cumulative assessment approach of indoor air quality (IAQ) is useful for monitoring the values of total amounts of indoor air pollutants emitted, in case of exposure to indoor air pollutants for a long time. Also, the values of CCIAI are influenced more by the values of concentration of NO2, which is released due to the use of air conditioners and combustion of the fuel. The results obtained in

Dual Mode NOx Sensor: Measuring Both the Accumulated Amount and Instantaneous Level at Low Concentrations

Directory of Open Access Journals (Sweden)

Jaco H. Visser

2012-03-01

Full Text Available The accumulating-type (or integrating-type NOx sensor principle offers two operation modes to measure low levels of NOx: The direct signal gives the total amount dosed over a time interval and its derivative the instantaneous concentration. With a linear sensor response, no baseline drift, and both response times and recovery times in the range of the gas exchange time of the test bench (5 to 7 s, the integrating sensor is well suited to reliably detect low levels of NOx. Experimental results are presented demonstrating the sensor’s integrating properties for the total amount detection and its sensitivity to both NO and to NO2. We also show the correlation between the derivative of the sensor signal and the known gas concentration. The long-term detection of NOx in the sub-ppm range (e.g., for air quality measurements is discussed. Additionally, a self-adaption of the measurement range taking advantage of the temperature dependency of the sensitivity is addressed.

Quantitative approaches for profit maximization in direct marketing

NARCIS (Netherlands)

van der Scheer, H.R.

1998-01-01

An effective direct marketing campaign aims at selecting those targets, offer and communication elements - at the right time - that maximize the net profits. The list of individuals to be mailed, i.e. the targets, is considered to be the most important component. Therefore, a large amount of direct

Exploring the Amount and Type of Writing Instruction during Language Arts Instruction in Kindergarten Classrooms

Science.gov (United States)

Puranik, Cynthia S.; Al Otaiba, Stephanie; Sidler, Jessica Folsom; Greulich, Luana

2014-01-01

The objective of this exploratory investigation was to examine the nature of writing instruction in kindergarten classrooms and to describe student writing outcomes at the end of the school year. Participants for this study included 21 teachers and 238 kindergarten children from nine schools. Classroom teachers were videotaped once each in the fall and winter during the 90 minute instructional block for reading and language arts to examine time allocation and the types of writing instructional practices taking place in the kindergarten classrooms. Classroom observation of writing was divided into student-practice variables (activities in which students were observed practicing writing or writing independently) and teacher-instruction variables (activities in which the teacher was observed providing direct writing instruction). In addition, participants completed handwriting fluency, spelling, and writing tasks. Large variability was observed in the amount of writing instruction occurring in the classroom, the amount of time kindergarten teachers spent on writing and in the amount of time students spent writing. Marked variability was also observed in classroom practices both within and across schools and this fact was reflected in the large variability noted in kindergartners’ writing performance. PMID:24578591

Exploring the Amount and Type of Writing Instruction during Language Arts Instruction in Kindergarten Classrooms.

Science.gov (United States)

Puranik, Cynthia S; Al Otaiba, Stephanie; Sidler, Jessica Folsom; Greulich, Luana

2014-02-01

The objective of this exploratory investigation was to examine the nature of writing instruction in kindergarten classrooms and to describe student writing outcomes at the end of the school year. Participants for this study included 21 teachers and 238 kindergarten children from nine schools. Classroom teachers were videotaped once each in the fall and winter during the 90 minute instructional block for reading and language arts to examine time allocation and the types of writing instructional practices taking place in the kindergarten classrooms. Classroom observation of writing was divided into student-practice variables (activities in which students were observed practicing writing or writing independently) and teacher-instruction variables (activities in which the teacher was observed providing direct writing instruction). In addition, participants completed handwriting fluency, spelling, and writing tasks. Large variability was observed in the amount of writing instruction occurring in the classroom, the amount of time kindergarten teachers spent on writing and in the amount of time students spent writing. Marked variability was also observed in classroom practices both within and across schools and this fact was reflected in the large variability noted in kindergartners' writing performance.

A study on the quantitative model of human response time using the amount and the similarity of information

International Nuclear Information System (INIS)

Lee, Sung Jin

2006-02-01

The mental capacity to retain or recall information, or memory is related to human performance during processing of information. Although a large number of studies have been carried out on human performance, little is known about the similarity effect. The purpose of this study was to propose and validate a quantitative and predictive model on human response time in the user interface with the basic concepts of information amount, similarity and degree of practice. It was difficult to explain human performance by only similarity or information amount. There were two difficulties: constructing a quantitative model on human response time and validating the proposed model by experimental work. A quantitative model based on the Hick's law, the law of practice and similarity theory was developed. The model was validated under various experimental conditions by measuring the participants' response time in the environment of a computer-based display. Human performance was improved by degree of similarity and practice in the user interface. Also we found the age-related human performance which was degraded as he or she was more elder. The proposed model may be useful for training operators who will handle some interfaces and predicting human performance by changing system design

How restrained eaters perceive the amount they eat.

Science.gov (United States)

Jansen, A

1996-09-01

The cognitive model of binge eating states that it is the awareness of a broken diet that disinhibits the restrained eater. It is, according to that model, the perception of having overeaten that triggers disinhibited eating. However, although the perception of the amount eaten plays a central role in cognitive restraint theory, it has never directly been tested how restrained subjects perceive the amount of food they eat. In the present studies, participants were given ad libitum access to large amounts of palatable food and both their perception of the amount eaten and their estimated caloric intake were compared with the amount they actually ate. The restrained participants in these studies ate more than the unrestrained participants. In the first and second studies, the restrained participants consumed 571 and 372 'forbidden' calories respectively, without having the feeling that they had eaten very much, let alone too much. Moreover in both studies, the restrained eaters underestimated their caloric intake, whereas unrestrained eaters estimated their caloric intake quite well. The potential implications of the present findings for the cognitive restraint model are discussed.

Matching times of leading and following suggest cooperation through direct reciprocity during V-formation flight in ibis.

Science.gov (United States)

Voelkl, Bernhard; Portugal, Steven J; Unsöld, Markus; Usherwood, James R; Wilson, Alan M; Fritz, Johannes

2015-02-17

One conspicuous feature of several larger bird species is their annual migration in V-shaped or echelon formation. When birds are flying in these formations, energy savings can be achieved by using the aerodynamic up-wash produced by the preceding bird. As the leading bird in a formation cannot profit from this up-wash, a social dilemma arises around the question of who is going to fly in front? To investigate how this dilemma is solved, we studied the flight behavior of a flock of juvenile Northern bald ibis (Geronticus eremita) during a human-guided autumn migration. We could show that the amount of time a bird is leading a formation is strongly correlated with the time it can itself profit from flying in the wake of another bird. On the dyadic level, birds match the time they spend in the wake of each other by frequent pairwise switches of the leading position. Taken together, these results suggest that bald ibis cooperate by directly taking turns in leading a formation. On the proximate level, we propose that it is mainly the high number of iterations and the immediacy of reciprocation opportunities that favor direct reciprocation. Finally, we found evidence that the animals' propensity to reciprocate in leading has a substantial influence on the size and cohesion of the flight formations.

A study of the predictive model on the user reaction time using the information amount and similarity

International Nuclear Information System (INIS)

Lee, Sungjin; Heo, Gyunyoung; Chang, S.H.

2004-01-01

Human operations through a user interface are divided into two types. The one is the single operation that is performed on a static interface. The other is the sequential operation that achieves a goal by handling several displays through operator's navigation in the crt-based console. Sequential operation has similar meaning with continuous task. Most operations in recently developed computer applications correspond to the sequential operation, and the single operation can be considered as a part of the sequential operation. In the area of HCI (human computer interaction) evaluation, the Hick-Hyman law counts as the most powerful theory. The most important factor in the equation of Hick-Hyman law about choice reaction time is the quantified amount of information conveyed by a statement, stimulus, or event. Generally, we can expect that if there are some similarities between a series of interfaces, human operator is able to use his attention resource effectively. That is the performance of human operator is increased by the similarity. The similarity may be able to affect the allocation of attention resource based on separate STSS (short-term sensory store) and long-term memory. There are theories related with this concept, which are task switching paradigm and the law of practice. However, it is not easy to explain the human operator performance with only the similarity or the information amount. There are few theories to explain the performance with the combination of the similarity and the information amount. The objective of this paper is to purpose and validate the quantitative and predictive model on the user reaction time in CRT-based displays. Another objective is to validate various theories related with human cognition and perception, which are Hick-Hyman law and the law of practice as representative theories. (author)

Hopf bifurcation analysis of Chen circuit with direct time delay feedback

International Nuclear Information System (INIS)

Hai-Peng, Ren; Wen-Chao, Li; Ding, Liu

2010-01-01

Direct time delay feedback can make non-chaotic Chen circuit chaotic. The chaotic Chen circuit with direct time delay feedback possesses rich and complex dynamical behaviours. To reach a deep and clear understanding of the dynamics of such circuits described by delay differential equations, Hopf bifurcation in the circuit is analysed using the Hopf bifurcation theory and the central manifold theorem in this paper. Bifurcation points and bifurcation directions are derived in detail, which prove to be consistent with the previous bifurcation diagram. Numerical simulations and experimental results are given to verify the theoretical analysis. Hopf bifurcation analysis can explain and predict the periodical orbit (oscillation) in Chen circuit with direct time delay feedback. Bifurcation boundaries are derived using the Hopf bifurcation analysis, which will be helpful for determining the parameters in the stabilisation of the originally chaotic circuit

Direct coronary stenting in reducing radiation and radiocontrast consumption

International Nuclear Information System (INIS)

Caluk, Jasmin; Osmanovic, Enes; Barakovic, Fahir; Kusljugic, Zumreta; Terzic, Ibrahim; Caluk, Selma; Sofic, Amela

2010-01-01

Coronary stenting is the primary means of coronary revascularization. There are two basic techniques of stent implantation: stenting with balloon predilatation of stenosis and stenting without predilatation (direct stenting). Limiting the time that a fluoroscope is activated and by appropriately managing the intensity of the applied radiation, the operator limits radiation in the environment, and this saves the exposure to the patient and all personnel in the room. Nephrotoxicity is one of the most important properties of radiocontrast. The smaller amount of radiocontrast used also provides multiple positive effects, primarily regarding the periprocedural risk for the patients with the reduced renal function. The goal of the study was to compare fluoroscopy time, the amount of radiocontrast, and expenses of material used in direct stenting and in stenting with predilatation. In a prospective study, 70 patients with coronary disease were randomized to direct stenting, or stenting with predilatation. Fluoroscopy time and radiocontrast use were significantly reduced in the directly stented patients in comparison to the patients stented with balloon-predilatation. The study showed a significant reduction of expenses when using a direct stenting method in comparison to stenting with predilatation. If the operator predicts that the procedure can be performed using direct stenting, he is encouraged to do so. Direct stenting is recommended for all percutaneous coronary interventions when appropriate conditions have been met. If direct stenting has been unsuccessful, the procedure can be converted to predilatation

The Origin and Time Dependence of the Amount and Composition of Non-Constituent Gases Present in Crystal Growth Systems

Science.gov (United States)

Palosz, Witold

1998-01-01

Presence of different, non-constituent gases may be a critical factor in crystal growth systems. In Physical Vapor Transport processes the cras(es) can be used intentionally (to prevent excessively high, unstable growth conditions), or can evolve unintentionally during the course of the process (which may lead to undesired reduction in the -rowth rate). In melt growth, particularly under low gravity conditions (reduced hydrostatic pressure) the gas present in the system may contribute to formation of voids in the growing crystals and even to a separation of the crystal and the liquid phase [1]. On the other hand, some amount of gas may facilitate 'contactless' crystal growth particularly under reduced gravity conditions [2 - 6]. Different non-constituent gases may be present in growth ampoules, and their amount and composition may change during the crystallization process. Some gases can appear even in empty ampoules sealed originally under high vacuum: they may diffuse in from the outside, and/or desorb from the ampoule walls. Residual gases can also be generated by the source materials: even very high purity commercial elements and compounds may contain trace amounts of impurities, particularly oxides. The oxides may have low volatilities themselves but their reaction with other species, particularly carbon and hydrogen, may produce volatile compounds like water or carbon oxides. The non-constituent gases, either added initially to the system or evolved during the material processing, may diffuse out of the ampoule during the course of the experiment. Gases present outside (e.g. as a protective atmosphere or thermal conductor) may diffuse into the ampoule. In either case the growth conditions and the quality of the crystals may be affected. The problem is of a particular importance in sealed systems where the amount of the gases cannot be directly controlled. Therefore a reasonable knowledge and understanding of the origin, composition, magnitude, and change with

Determination of trace amount of formaldehyde base on a bromate-Malachite Green system.

Science.gov (United States)

Tang, Yufang; Chen, Hao; Weng, Chao; Tang, Xiaohui; Zhang, Miaoling; Hu, Tao

2015-01-25

A novel catalytic kinetic spectrophotometric method for determination of trace amount of formaldehyde (FA) has been established, based on catalytic effect of trace amount of FA on the oxidation of Malachite Green (MG) by potassium bromate in presence of sulfuric acid medium, and was reported for the first time. The method was monitored by measuring the decrease in absorbance of MG at 617 nm and allowed a precise determination of FA in the range of 0.003-0.08 μg mL(-1), with a limit of detection down to 1 ng mL(-1). The relative standard deviation of 10 replicate measurements was 1.63%. The method developed was approved to be sensitive, selective and accurate, and adopted to determinate free FA in samples directly with good accuracy and reproducibility. Copyright © 2014 Elsevier B.V. All rights reserved.

Direct radiological magnification in experimental medicine

International Nuclear Information System (INIS)

Poulsen Nautrup, C.; Berens von Rautenfeld, D.

1991-01-01

Some aspects of direct radiological magnification in experimental medicine are shown by teratological investigations of the fetal rat skeleton and by indirect lymphadenography in rabbits. A combination of microfocal radiography and high-resolution non-screen films or digital image processing allows the evaluation of structures with a minimum size of 5 μm. Pseudo-3D images correlate directly with scanning electron micrographs of equivalent casts. Therefore radiography with direct magnification can make difficult preparations and time-consuming staining processes unnecessary. Besides saving time, the main advantage of this method is the amount of new information it yields. For the first time, for example, the filling mechanism becomes visible even in minute vessels, such as the intranodal sinuses, which measure about 10 μm. Hitherto, we have only been able to infer this mechanism from histological specimens. A further benefit of direct radiological magnification over the conventional microscopical method is the smaller number of experimental animals needed. (orig.) [de

Quantification of Endogenous Cholesterol in Human Serum on Paper Using Direct Analysis in Real Time Mass Spectrometry.

Science.gov (United States)

Hsieh, Hua-Yi; Li, Li-Hua; Hsu, Ren-Yu; Kao, Wei-Fong; Huang, Ying-Chen; Hsu, Cheng-Chih

2017-06-06

Blood testing for endogenous small metabolites to determine physiological and biochemical states is routine for laboratory analysis. Here we demonstrate that by combining the commercial direct analysis in real time (DART) ion source with an ion trap mass spectrometer, native cholesterol in its free alcohol form is readily detected from a few hundred nanoliters of human serum loaded onto chromatography paper. Deuterium-labeled cholesterol was used as the internal standard to obtain the absolute quantity of the endogenous cholesterol. The amount of the cholesterol measured by this paper-loaded DART mass spectrometry (pDART-MS) is statistically comparable with that obtained by using commercially available fluorometric-enzymatic assay and liquid chromatography/mass spectrometry. Furthermore, sera from 21 participants at three different time points in an ultramarathon were collected to obtain their cholesterol levels. The test requires only very minimal sample preparation, and the concentrations of cholesterol in each sample were acquired within a minute.

Circadian-Time Sickness: Time-of-Day Cue-Conflicts Directly Affect Health.

Science.gov (United States)

van Ee, Raymond; Van de Cruys, Sander; Schlangen, Luc J M; Vlaskamp, Björn N S

2016-11-01

A daily rhythm that is not in synchrony with the environmental light-dark cycle (as in jetlag and shift work) is known to affect mood and health through an as yet unresolved neural mechanism. Here, we combine Bayesian probabilistic 'cue-conflict' theory with known physiology of the biological clock of the brain, entailing the insight that, for a functional pacemaker, it is sufficient to have two interacting units (reflecting environmental and internal time-of-day cues), without the need for an extra homuncular directing unit. Unnatural light-dark cycles cause a time-of-day cue-conflict that is reflected by a desynchronization between the ventral (environmental) and dorsal (internal) pacemaking signals of the pacemaker. We argue that this desynchronization, in-and-of-itself, produces health issues that we designate as 'circadian-time sickness', analogous to 'motion sickness'. Copyright © 2016 Elsevier Ltd. All rights reserved.

Highly Sensitive GMO Detection Using Real-Time PCR with a Large Amount of DNA Template: Single-Laboratory Validation.

Science.gov (United States)

Mano, Junichi; Hatano, Shuko; Nagatomi, Yasuaki; Futo, Satoshi; Takabatake, Reona; Kitta, Kazumi

2018-03-01

Current genetically modified organism (GMO) detection methods allow for sensitive detection. However, a further increase in sensitivity will enable more efficient testing for large grain samples and reliable testing for processed foods. In this study, we investigated real-time PCR-based GMO detection methods using a large amount of DNA template. We selected target sequences that are commonly introduced into many kinds of GM crops, i.e., 35S promoter and nopaline synthase (NOS) terminator. This makes the newly developed method applicable to a wide range of GMOs, including some unauthorized ones. The estimated LOD of the new method was 0.005% of GM maize events; to the best of our knowledge, this method is the most sensitive among the GM maize detection methods for which the LOD was evaluated in terms of GMO content. A 10-fold increase in the DNA amount as compared with the amount used under common testing conditions gave an approximately 10-fold reduction in the LOD without PCR inhibition. Our method is applicable to various analytical samples, including processed foods. The use of other primers and fluorescence probes would permit highly sensitive detection of various recombinant DNA sequences besides the 35S promoter and NOS terminator.

Forecasting of Information Security Related Incidents: Amount of Spam Messages as a Case Study

Science.gov (United States)

Romanov, Anton; Okamoto, Eiji

With the increasing demand for services provided by communication networks, quality and reliability of such services as well as confidentiality of data transfer are becoming ones of the highest concerns. At the same time, because of growing hacker's activities, quality of provided content and reliability of its continuous delivery strongly depend on integrity of data transmission and availability of communication infrastructure, thus on information security of a given IT landscape. But, the amount of resources allocated to provide information security (like security staff, technical countermeasures and etc.) must be reasonable from the economic point of view. This fact, in turn, leads to the need to employ a forecasting technique in order to make planning of IT budget and short-term planning of potential bottlenecks. In this paper we present an approach to make such a forecasting for a wide class of information security related incidents (ISRI) — unambiguously detectable ISRI. This approach is based on different auto regression models which are widely used in financial time series analysis but can not be directly applied to ISRI time series due to specifics related to information security. We investigate and address this specifics by proposing rules (special conditions) of collection and storage of ISRI time series, adherence to which improves forecasting in this subject field. We present an application of our approach to one type of unambiguously detectable ISRI — amount of spam messages which, if not mitigated properly, could create additional load on communication infrastructure and consume significant amounts of network capacity. Finally we evaluate our approach by simulation and actual measurement.

5 CFR 330.504 - Special restrictions after appointment under Part-time Direct Hire Program.

Science.gov (United States)

2010-01-01

... under Part-time Direct Hire Program. 330.504 Section 330.504 Administrative Personnel OFFICE OF... To Protect Competitive Principles § 330.504 Special restrictions after appointment under Part-time Direct Hire Program. (a) A person hired under the Part-time Direct Hire Program may not be changed to...

Less-structured time in children's daily lives predicts self-directed executive functioning.

Science.gov (United States)

Barker, Jane E; Semenov, Andrei D; Michaelson, Laura; Provan, Lindsay S; Snyder, Hannah R; Munakata, Yuko

2014-01-01

Executive functions (EFs) in childhood predict important life outcomes. Thus, there is great interest in attempts to improve EFs early in life. Many interventions are led by trained adults, including structured training activities in the lab, and less-structured activities implemented in schools. Such programs have yielded gains in children's externally-driven executive functioning, where they are instructed on what goal-directed actions to carry out and when. However, it is less clear how children's experiences relate to their development of self-directed executive functioning, where they must determine on their own what goal-directed actions to carry out and when. We hypothesized that time spent in less-structured activities would give children opportunities to practice self-directed executive functioning, and lead to benefits. To investigate this possibility, we collected information from parents about their 6-7 year-old children's daily, annual, and typical schedules. We categorized children's activities as "structured" or "less-structured" based on categorization schemes from prior studies on child leisure time use. We assessed children's self-directed executive functioning using a well-established verbal fluency task, in which children generate members of a category and can decide on their own when to switch from one subcategory to another. The more time that children spent in less-structured activities, the better their self-directed executive functioning. The opposite was true of structured activities, which predicted poorer self-directed executive functioning. These relationships were robust (holding across increasingly strict classifications of structured and less-structured time) and specific (time use did not predict externally-driven executive functioning). We discuss implications, caveats, and ways in which potential interpretations can be distinguished in future work, to advance an understanding of this fundamental aspect of growing up.

European social citizenship and gender: the part-time work directive

NARCIS (Netherlands)

Bleijenbergh, I.L.; de Bruijn, J.G.M.; Bussemaker, M.

2004-01-01

This article considers whether the development of European rights for workers implies a European social citizenship. It analyses the debate during the preparation and adoption of the EU Directive on part-time work in 1997, which guarantees part-time workers (who are primarily women) the same pay and

Work-Family Conflict: Does Educational Attainment Influence the Amount of Negative Spillover?

Science.gov (United States)

Erarslan, Ayse Burcin

2009-01-01

Using a data from a purposive sample of 216 women and 218 men in Turkey, the relationship between educational attainment and the amount of negative spillover from job-to-home and home-to-job was examined. It was hypothesized that men and women with higher levels of education have less amount of negative spillover in both directions. Certain work…

Magnetosheath Propagation Time of Solar Wind Directional Discontinuities

Science.gov (United States)

Samsonov, A. A.; Sibeck, D. G.; Dmitrieva, N. P.; Semenov, V. S.; Slivka, K. Yu.; Å afránkova, J.; Němeček, Z.

2018-05-01

Observed delays in the ground response to solar wind directional discontinuities have been explained as the result of larger than expected magnetosheath propagation times. Recently, Samsonov et al. (2017, https://doi.org/10.1002/2017GL075020) showed that the typical time for a southward interplanetary magnetic field (IMF) turning to propagate across the magnetosheath is 14 min. Here by using a combination of magnetohydrodynamic simulations, spacecraft observations, and analytic calculations, we study the dependence of the propagation time on solar wind parameters and near-magnetopause cutoff speed. Increases in the solar wind speed result in greater magnetosheath plasma flow velocities, decreases in the magnetosheath thickness and, as a result, decreases in the propagation time. Increases in the IMF strength result in increases in the magnetosheath thickness and increases in the propagation time. Both magnetohydrodynamic simulations and observations suggest that propagation times are slightly smaller for northward IMF turnings. Magnetosheath flow deceleration must be taken into account when predicting the arrival times of solar wind structures at the dayside magnetopause.

European Working Time Directive: implications for surgical training.

LENUS (Irish Health Repository)

Donohoe, C L

2010-02-01

The forthcoming implementation of the European Working Time Directive (EWTD) for non-consultant hospital doctors (NCHDs) poses a number of challenges in the areas of patient care, training, service provision and quality of life for workers. Surgery, as a craft-based speciality, will face a greater impact on training of future surgeons as operating time could be lost to service provision. The EWTD acts a stimulus for reform of current working practices and re-configuration of services. It will necessitate transformation of the way in which surgeons are trained, if current standards are to be maintained.

Freehand direct arthrography of the shoulder using near real-time guidance in an open 1.0-T MRI scanner

Energy Technology Data Exchange (ETDEWEB)

Wybranski, Christian [University Hospital of Cologne, Institute of Diagnostic and Interventional Radiology, Cologne (Germany); Adamchic, Ilya; Ricke, Jens; Fischbach, Frank; Fischbach, Katharina [Otto-von-Guericke University Medical School, Department of Radiology and Nuclear Medicine, Magdeburg (Germany); Roehl, Friedrich-Wilhelm [Otto-von-Guericke University Medical School, Institute of Biometry and Medical Informatics, Magdeburg (Germany)

2017-01-15

To assess the technical success and duration of magnetic resonance imaging (MRI)-guided freehand direct shoulder arthrography (FDSA) with near real-time imaging implemented in a routine shoulder MRI examination on an open 1.0-T MRI scanner, and to assess the learning curve of residents new to this technique. An experienced MRI interventionalist (the expert) performed 125 MRI-guided FDSA procedures, and 75 patients were treated by one of three residents without previous experience in MRI-guided FDSA. Technical success rate and duration of MRI-guided FDSA of the expert and the residents were compared. The residents' learning curves were assessed. The occurrence of extra-articular deposition and leakage of contrast media from the puncture site and the subsequent impairment of image interpretation were retrospectively analyzed. Overall technical success was 97.5 %. The expert needed overall fewer puncture needle readjustments and was faster at puncture needle positioning (p < 0.01). The learning curve of the residents, however, was steep. They leveled with the performance of the expert after ∼ 15 interventions. With a minimal amount of training all steps of MRI-guided FDSA can be performed in ≤10 min. Magnetic resonance-guided FDSA in an open 1.0-T MRI scanner can be performed with high technical success in a reasonably short amount of time. Only a short learning curve is necessary to achieve expert level. (orig.)

Directional short-time Fourier transform of distributions

Directory of Open Access Journals (Sweden)

Katerina Hadzi-Velkova Saneva

2016-04-01

Full Text Available Abstract In this paper we consider the directional short-time Fourier transform (DSTFT that was introduced and investigated in (Giv in J. Math. Anal. Appl. 399:100-107, 2013. We analyze the DSTFT and its transpose on test function spaces S ( R n $\\mathcal {S}(\\mathbb {R}^{n}$ and S ( Y 2 n $\\mathcal {S}(\\mathbb {Y}^{2n}$ , respectively, and prove the continuity theorems on these spaces. Then the obtained results are used to extend the DSTFT to spaces of distributions.

Dynamics of Choice: Relative Rate and Amount Affect Local Preference at Three Different Time Scales

Science.gov (United States)

Aparicio, Carlos F.; Baum, William M.

2009-01-01

To examine extended control over local choice, the present study investigated preference in transition as food-rate ratio provided by two levers changed across seven components within daily sessions, and food-amount ratio changed across phases. Phase 1 arranged a food-amount ratio of 4:1 (i.e., the left lever delivered four pellets and the right…

A centrifugal direct recombinase polymerase amplification (direct-RPA) microdevice for multiplex and real-time identification of food poisoning bacteria.

Science.gov (United States)

Choi, Goro; Jung, Jae Hwan; Park, Byung Hyun; Oh, Seung Jun; Seo, Ji Hyun; Choi, Jong Seob; Kim, Do Hyun; Seo, Tae Seok

2016-06-21

In this study, we developed a centrifugal direct recombinase polymerase amplification (direct-RPA) microdevice for multiplex and real-time identification of food poisoning bacteria contaminated milk samples. The microdevice was designed to contain identical triplicate functional units and each unit has four reaction chambers, thereby making it possible to perform twelve direct-RPA reactions simultaneously. The integrated microdevice consisted of two layers: RPA reagents were injected in the top layer, while spiked milk samples with food poisoning bacteria were loaded into sample reservoirs in the bottom layer. For multiplex bacterial detection, the target gene-specific primers and probes were dried in each reaction chamber. The introduced samples and reagents could be equally aliquoted and dispensed into each reaction chamber by centrifugal force, and then the multiplex direct-RPA reaction was executed. The target genes of bacteria spiked in milk could be amplified at 39 °C without a DNA extraction step by using the direct-RPA cocktails, which were a combination of a direct PCR buffer and RPA enzymes. As the target gene amplification proceeded, the increased fluorescence signals coming from the reaction chambers were recorded in real-time at an interval of 2 min. The entire process, including the sample distribution, the direct-RPA reaction, and the real-time analysis, was accomplished with a custom-made portable genetic analyzer and a miniaturized optical detector. Monoplex, duplex, and triplex food poisoning bacteria (Salmonella enterica, Escherichia coli O157:H7, and Vibrio parahaemolyticus) detection was successfully performed with a detection sensitivity of 4 cells per 3.2 μL of milk samples within 30 min. By implementing the direct-PRA on the miniaturized centrifugal microsystem, the on-site food poisoning bacteria analysis would be feasible with high speed, sensitivity, and multiplicity.

Determination of the response time of pressure transducers using the direct method

International Nuclear Information System (INIS)

Perillo, S.R.P.

1994-01-01

The available methods to determine the response time of nuclear safety related pressure transducers are discussed, with emphasis to the direct method. In order to perform the experiments, a Hydraulic Ramp Generator was built. The equipment produces ramp pressure transients simultaneously to a reference transducer and to the transducer under test. The time lag between the output of the two transducers, when they reach a predetermined setpoint, is measured as the time delay of the transducer under test. Some results using the direct method to determine the time delay of pressure transducers (1 E Class Conventional) are presented. (author). 18 refs, 35 figs, 12 tabs

Financial Time Series Forecasting Using Directed-Weighted Chunking SVMs

Directory of Open Access Journals (Sweden)

Yongming Cai

2014-01-01

Full Text Available Support vector machines (SVMs are a promising alternative to traditional regression estimation approaches. But, when dealing with massive-scale data set, there exist many problems, such as the long training time and excessive demand of memory space. So, the SVMs algorithm is not suitable to deal with financial time series data. In order to solve these problems, directed-weighted chunking SVMs algorithm is proposed. In this algorithm, the whole training data set is split into several chunks, and then the support vectors are obtained on each subset. Furthermore, the weighted support vector regressions are calculated to obtain the forecast model on the new working data set. Our directed-weighted chunking algorithm provides a new method of support vectors decomposing and combining according to the importance of chunks, which can improve the operation speed without reducing prediction accuracy. Finally, IBM stock daily close prices data are used to verify the validity of the proposed algorithm.

Borehole radar directionality in the time domain in small aperture antennas

CSIR Research Space (South Africa)

Vogt, DR

2008-06-01

Full Text Available by interpolation. Initial tests show that mutual coupling between the antenna elements does affect the relative timing, but does not prevent the extraction of usable directional data. Experimental data from a test tank confirms that estimates of reflector... the phase differ- ences at each antenna. They showed that mutual cou- pling was tolerable. In a related paper [9] they presented an algorithm to recover direction that performed well. II. SYSTEM DESCRIPTION In this paper, a directional antenna...

Versatile directional searches for gravitational waves with Pulsar Timing Arrays

Science.gov (United States)

Madison, D. R.; Zhu, X.-J.; Hobbs, G.; Coles, W.; Shannon, R. M.; Wang, J. B.; Tiburzi, C.; Manchester, R. N.; Bailes, M.; Bhat, N. D. R.; Burke-Spolaor, S.; Dai, S.; Dempsey, J.; Keith, M.; Kerr, M.; Lasky, P.; Levin, Y.; Osłowski, S.; Ravi, V.; Reardon, D.; Rosado, P.; Spiewak, R.; van Straten, W.; Toomey, L.; Wen, L.; You, X.

2016-02-01

By regularly monitoring the most stable millisecond pulsars over many years, pulsar timing arrays (PTAs) are positioned to detect and study correlations in the timing behaviour of those pulsars. Gravitational waves (GWs) from supermassive black hole binaries (SMBHBs) are an exciting potentially detectable source of such correlations. We describe a straightforward technique by which a PTA can be `phased-up' to form time series of the two polarization modes of GWs coming from a particular direction of the sky. Our technique requires no assumptions regarding the time-domain behaviour of a GW signal. This method has already been used to place stringent bounds on GWs from individual SMBHBs in circular orbits. Here, we describe the methodology and demonstrate the versatility of the technique in searches for a wide variety of GW signals including bursts with unmodelled waveforms. Using the first six years of data from the Parkes Pulsar Timing Array, we conduct an all-sky search for a detectable excess of GW power from any direction. For the lines of sight to several nearby massive galaxy clusters, we carry out a more detailed search for GW bursts with memory, which are distinct signatures of SMBHB mergers. In all cases, we find that the data are consistent with noise.

Effects of pilot injection timing and EGR on a modern V6 common rail direct injection diesel engine

Science.gov (United States)

Rosli Abdullah, Nik; Mamat, Rizalman; Wyszynski, Miroslaw L.; Tsolakis, Anthanasios; Xu, Hongming

2013-12-01

Nitric oxide and smoke emissions in diesel engine can be controlled by optimising the air/fuel mixture. Early injection produces premixed charge resulted in simultaneous NOx and smoke emissions reduction. However, there could be an increase in hydrocarbons and CO emissions due to fuel impinged to the cylinder wall. The focus of the present work is to investigate the effects of a variation of pilot injection timing with EGR to NOx and smoke level on a modern V6 common rail direct injection. This study is carried out at two different engine load conditions of 30 Nm and 55 Nm, at constant engine speed of 2000 rpm. The results show that the early pilot injection timing contributed to the lower smoke level and higher NOx emissions. The higher level of NOx is due to higher combustion temperatures resulting from the complete combustion. Meanwhile, the lower smoke level is due to complete fuel combustion and soot oxidation. The early pilot injection timing produces an intermediate main ignition delay which also contributed to complete combustion. The formation of smoke is higher at a high engine load compared with low engine load due to the higher amount of fuel being injected.

Time-resolved studies of direct effects of radiation on DNA

International Nuclear Information System (INIS)

Fielden, E.M.; O'Neill, P.; Al-Kazwini, A.

1987-01-01

The biological changes induced by ionising radiation are a consequence of radiation-induced chemical events taking place at times <1s. These events are strongly influenced by the presence of chemical modifiers. Since DNA is a principle target for radiation-induced cell killing, DNA-free radicals are generated by direct ionisation of DNA moieties (direct effect) and by reaction with hydroxyl radicals formed by radiolysis of the water which is in the vicinity of the DNA (indirect effect). In order to study the 'direct' effects of radiation on DNA the following model approaches are discussed:- 1) Use of the technique of pulse radiolysis to investigate in aqueous solution the interactions of deoxynucleosides with SO/sub 4//sup .-/ whereby one-electron oxidised species of the bases are generated; and 2) time resolved, radiation-induced changes to solid DNA and related macromolecules (e.g. radiation-induced luminescence) in order to obtain an understanding of charge/energy migration as a result of ionisation of DNA. The influence of chemical modifiers and of environment is discussed in terms of the properties of the radiation-induced species produced. Since the properties of base radicals produced by SO/sub 4//sup .-/ are similar to those of the base OH-adducts oxidising properties, potential similarities between the 'direct' and 'indirect' effects of radiation are presented

Rapid, Time-Division Multiplexed, Direct Absorption- and Wavelength Modulation-Spectroscopy

Directory of Open Access Journals (Sweden)

Alexander Klein

2014-11-01

Full Text Available We present a tunable diode laser spectrometer with a novel, rapid time multiplexed direct absorption- and wavelength modulation-spectroscopy operation mode. The new technique allows enhancing the precision and dynamic range of a tunable diode laser absorption spectrometer without sacrificing accuracy. The spectroscopic technique combines the benefits of absolute concentration measurements using calibration-free direct tunable diode laser absorption spectroscopy (dTDLAS with the enhanced noise rejection of wavelength modulation spectroscopy (WMS. In this work we demonstrate for the first time a 125 Hz time division multiplexed (TDM-dTDLAS-WMS spectroscopic scheme by alternating the modulation of a DFB-laser between a triangle-ramp (dTDLAS and an additional 20 kHz sinusoidal modulation (WMS. The absolute concentration measurement via the dTDLAS-technique allows one to simultaneously calibrate the normalized 2f/1f-signal of the WMS-technique. A dTDLAS/WMS-spectrometer at 1.37 µm for H2O detection was built for experimental validation of the multiplexing scheme over a concentration range from 50 to 3000 ppmV (0.1 MPa, 293 K. A precision of 190 ppbV was achieved with an absorption length of 12.7 cm and an averaging time of two seconds. Our results show a five-fold improvement in precision over the entire concentration range and a significantly decreased averaging time of the spectrometer.

29 CFR 4219.14 - Amount of liability for 20-year-limitation amounts.

Science.gov (United States)

2010-07-01

... amount equal to the present value of all initial withdrawal liability payments for which the employer was not liable pursuant to section 4219(c)(1)(B) of ERISA. The present value of such payments shall be... 29 Labor 9 2010-07-01 2010-07-01 false Amount of liability for 20-year-limitation amounts. 4219.14...

Strong normalization by type-directed partial evaluation and run-time code generation

DEFF Research Database (Denmark)

Balat, Vincent; Danvy, Olivier

1998-01-01

We investigate the synergy between type-directed partial evaluation and run-time code generation for the Caml dialect of ML. Type-directed partial evaluation maps simply typed, closed Caml values to a representation of their long βη-normal form. Caml uses a virtual machine and has the capability...... to load byte code at run time. Representing the long βη-normal forms as byte code gives us the ability to strongly normalize higher-order values (i.e., weak head normal forms in ML), to compile the resulting strong normal forms into byte code, and to load this byte code all in one go, at run time. We...... conclude this note with a preview of our current work on scaling up strong normalization by run-time code generation to the Caml module language....

Strong Normalization by Type-Directed Partial Evaluation and Run-Time Code Generation

DEFF Research Database (Denmark)

Balat, Vincent; Danvy, Olivier

1997-01-01

We investigate the synergy between type-directed partial evaluation and run-time code generation for the Caml dialect of ML. Type-directed partial evaluation maps simply typed, closed Caml values to a representation of their long βη-normal form. Caml uses a virtual machine and has the capability...... to load byte code at run time. Representing the long βη-normal forms as byte code gives us the ability to strongly normalize higher-order values (i.e., weak head normal forms in ML), to compile the resulting strong normal forms into byte code, and to load this byte code all in one go, at run time. We...... conclude this note with a preview of our current work on scaling up strong normalization by run-time code generation to the Caml module language....

Investigating the Relationship Between Self-Directed Learning Readiness and Time Management Skills in Turkish Undergraduate Nursing Students.

Science.gov (United States)

Ertuğ, Nurcan; Faydali, Saide

The aims of this study were to determine self-directed learning and time management skills of undergraduate nursing students and to investigate the relationship between the concepts. The use of self-directed learning has increased as an educational strategy in recent years. This descriptive and correlational study was conducted with 383 undergraduate nursing students in Turkey. Data were collected using a sociodemographic questionnaire, the Self-Directed Learning Readiness Scale, and Time Management Questionnaire. Mean scores were as follows: self-directed learning readiness, 159.12 (SD = 20.8); time management, 87.75 (SD = 12.1). A moderate positive correlation was found between self-directed learning readiness and time management values. Time management scores were 78.42 when self-directed learning readiness was ≤149 and 90.82 when self-directed learning readiness was ≥ 150, with a statistically significant difference (p = .000). Level of self-directed learning and academic achievement were higher in students who managed their time well.

Comparison of the Amount of Time Spent on Computer Games and Aggressive Behavior in Male Middle School Students of Tehran

OpenAIRE

Mehrangiz Shoaa Kazemi; Zahra Shahabinezhad

2016-01-01

Background and Objectives: Modern technologies have a prominent role in adolescent's daily life. These technologies include specific cultural and moral patterns, which could be highly effective on adolescents. This research aimed at comparing the amount of time spent on computer games and aggressive behavior in male middle school students of Tehran. Materials and Methods: This study had a descriptive design. The study population included all male students of middle school of Tehran, and th...

Automated and angular time-synchronized directional gamma-ray scintillation sensor

International Nuclear Information System (INIS)

Kronenberg, S.; Brucker, G.J.

1998-01-01

The authors' previous research resulted in directional sensors for gamma rays and X rays that have a 4π solid angle of acceptance and, at the same time, a high angular resolution that is limited only by their ability to measure small angles. Angular resolution of ∼1 s of arc was achieved. These sensors are capable of operating and accurately detecting high and very low intensity radiation patterns. Such a system can also be used to image broad area sources and their scattering patterns. The principle of operation and design of directional sensors used in this study was described elsewhere; however, for convenience, a part of that text is repeated here. It was shown analytically that the angular distribution of radiation incident on the sensor is proportional to the first derivative of the scan data, that is, of the events' count rate versus orientation of the detector. The previously published results were obtained with a annual operating system. The detector assembly was set at a specific angle, and a pulse rate count was made. This was repeated at numerous other angles of orientation, a time-consuming and labor-intensive process. Recently, the authors automated this system, which is based on the detection of scintillations. The detector, which consists of a stack of plates of Lucite, plastic scintillator, and lead foils, rotates by means of a motor in front of a stationary photomultiplier tube (PMT). One revolution per second was chosen for the motor. At time zero, a trigger indicates that a revolution has started. The angle of orientation of the detector in the laboratory system is proportional to the time during one revolution. The process repeats itself a desired number of times. The trigger signal initiates a scan of a multichannel scalar (MCS). The detector assembly is allowed to rotate in the radiation field, and the MCS scans are repeated in an accumulated mode of operation until enough events are collected for the location of the radiation source to be

Direct Measurements of Smartphone Screen-Time: Relationships with Demographics and Sleep

OpenAIRE

Christensen, Matthew A.; Bettencourt, Laura; Kaye, Leanne; Moturu, Sai T.; Nguyen, Kaylin T.; Olgin, Jeffrey E.; Pletcher, Mark J.; Marcus, Gregory M.

2016-01-01

Background Smartphones are increasingly integrated into everyday life, but frequency of use has not yet been objectively measured and compared to demographics, health information, and in particular, sleep quality. Aims The aim of this study was to characterize smartphone use by measuring screen-time directly, determine factors that are associated with increased screen-time, and to test the hypothesis that increased screen-time is associated with poor sleep. Methods We performed a cross-sectio...

Offset-Free Direct Power Control of DFIG Under Continuous-Time Model Predictive Control

DEFF Research Database (Denmark)

Errouissi, Rachid; Al-Durra, Ahmed; Muyeen, S.M.

2017-01-01

This paper presents a robust continuous-time model predictive direct power control for doubly fed induction generator (DFIG). The proposed approach uses Taylor series expansion to predict the stator current in the synchronous reference frame over a finite time horizon. The predicted stator current...... is directly used to compute the required rotor voltage in order to minimize the difference between the actual stator currents and their references over the predictive time. However, as the proposed strategy is sensitive to parameter variations and external disturbances, a disturbance observer is embedded...... into the control loop to remove the steady-state error of the stator current. It turns out that the steady-state and the transient performances can be identified by simple design parameters. In this paper, the reference of the stator current is directly calculated from the desired stator active and reactive powers...

24 CFR 888.305 - Amount of the retroactive Housing Assistance Payments.

Science.gov (United States)

2010-04-01

... DIRECT LOAN PROGRAM, SECTION 202 SUPPORTIVE HOUSING FOR THE ELDERLY PROGRAM AND SECTION 811 SUPPORTIVE HOUSING FOR PERSONS WITH DISABILITIES PROGRAM) SECTION 8 HOUSING ASSISTANCE PAYMENTS PROGRAM-FAIR MARKET..., Section 202 Elderly or Handicapped, and Special Allocations Projects § 888.305 Amount of the retroactive...

[Meeting the needs of the European working time directive in german medical profession].

Science.gov (United States)

Friedrich, M; Popov, A F; Schmitto, J D; Bireta, C; Emmert, A; Tirilomis, T

2011-06-01

The legal obligation of the European Working Time Directive with its implementation into a German Working Hours Act requires German hospitals to give up old structures and requires the implementation of new working time models. The failure of the revision of the European Working Time Directive in April 2009 prevented that any changes of status quo might happen in the near future. Fundamental terms of the working law for the medical area have been elucidated and have been implemented into concrete calculation formulas. The planned working time has been clearly determined. Particularly, on-call duties and a signed "OptOut-declaration" have huge effects on the upper limit of the working time that is to be determined. Shift duty leads to the greatest limitations of the upper limit of the working time. The Working Hours Act defines the maximal, available, individual working time budget and thus the working time budget of a hospital and it limits the maximal availability of the service providers of a hospital as well as defining the maximal personnel costs. Transparency in this area lays the foundation for an effective time management and the creation of new working time models in accordance with the European Working Time Directive as well as the Working Hours Act and the "TVÄ" (labour contract for doctors at municipal hospitals). It is possible, with the knowledge of the maximal working time budget and the thereof resulting personnel costs, to calculate the economical revenues better. The reallocation of the working time of doctors enables efficiency enhancement. It is necessary to demand a clear definition of the tasks of doctors with the consequential discharge of tasks that should not/do not belong to the responsibilities of a doctor. This would lead to a more attractive working environment for doctors at hospitals and thus to an improvement of the care of the patients. The implementation of the European Time Directive is not to be seen as unrealizable, as has been

Dimension reduction of frequency-based direct Granger causality measures on short time series.

Science.gov (United States)

Siggiridou, Elsa; Kimiskidis, Vasilios K; Kugiumtzis, Dimitris

2017-09-01

The mainstream in the estimation of effective brain connectivity relies on Granger causality measures in the frequency domain. If the measure is meant to capture direct causal effects accounting for the presence of other observed variables, as in multi-channel electroencephalograms (EEG), typically the fit of a vector autoregressive (VAR) model on the multivariate time series is required. For short time series of many variables, the estimation of VAR may not be stable requiring dimension reduction resulting in restricted or sparse VAR models. The restricted VAR obtained by the modified backward-in-time selection method (mBTS) is adapted to the generalized partial directed coherence (GPDC), termed restricted GPDC (RGPDC). Dimension reduction on other frequency based measures, such the direct directed transfer function (dDTF), is straightforward. First, a simulation study using linear stochastic multivariate systems is conducted and RGPDC is favorably compared to GPDC on short time series in terms of sensitivity and specificity. Then the two measures are tested for their ability to detect changes in brain connectivity during an epileptiform discharge (ED) from multi-channel scalp EEG. It is shown that RGPDC identifies better than GPDC the connectivity structure of the simulated systems, as well as changes in the brain connectivity, and is less dependent on the free parameter of VAR order. The proposed dimension reduction in frequency measures based on VAR constitutes an appropriate strategy to estimate reliably brain networks within short-time windows. Copyright © 2017 Elsevier B.V. All rights reserved.

THE MAXIMUM AMOUNTS OF RAINFALL FALLEN IN SHORT PERIODS OF TIME IN THE HILLY AREA OF CLUJ COUNTY - GENESIS, DISTRIBUTION AND PROBABILITY OF OCCURRENCE

Directory of Open Access Journals (Sweden)

BLAGA IRINA

2014-03-01

Full Text Available The maximum amounts of rainfall are usually characterized by high intensity, and their effects on the substrate are revealed, at slope level, by the deepening of the existing forms of torrential erosion and also by the formation of new ones, and by landslide processes. For the 1971-2000 period, for the weather stations in the hilly area of Cluj County: Cluj- Napoca, Dej, Huedin and Turda the highest values of rainfall amounts fallen in 24, 48 and 72 hours were analyzed and extracted, based on which the variation and the spatial and temporal distribution of the precipitation were analyzed. The annual probability of exceedance of maximum rainfall amounts fallen in short time intervals (24, 48 and 72 hours, based on thresholds and class values was determined, using climatological practices and the Hyfran program facilities.

Interarrival times of message propagation on directed networks

Science.gov (United States)

Mihaljev, Tamara; de Arcangelis, Lucilla; Herrmann, Hans J.

2011-08-01

One of the challenges in fighting cybercrime is to understand the dynamics of message propagation on botnets, networks of infected computers used to send viruses, unsolicited commercial emails (SPAM) or denial of service attacks. We map this problem to the propagation of multiple random walkers on directed networks and we evaluate the interarrival time distribution between successive walkers arriving at a target. We show that the temporal organization of this process, which models information propagation on unstructured peer to peer networks, has the same features as SPAM reaching a single user. We study the behavior of the message interarrival time distribution on three different network topologies using two different rules for sending messages. In all networks the propagation is not a pure Poisson process. It shows universal features on Poissonian networks and a more complex behavior on scale free networks. Results open the possibility to indirectly learn about the process of sending messages on networks with unknown topologies, by studying interarrival times at any node of the network.

Time, Temperature and Amount of Distilled Water Effects on the Purity and Yield of Bis(2-hydroxyethyl Terephthalate Purification System

Directory of Open Access Journals (Sweden)

H.W. Goh

2015-07-01

Full Text Available Polyethylene terephthalate (PET bottle is one of the common plastic wastes existed in the municipal solid waste in Malaysia. One alternative to solve the abundant of PET wastes is chemical recycling of the wastes to produce a value added product. This technology not only can decrease the PET wastes in landfill sites but also can produce many useful recycled PET products. Bis(2-hydroxyethyl terephthalate (BHET obtained from glycolysis reaction of PET waste was purified using crystallization process. The hot distilled water was added to glycolysis product followed by cooling and filtration to extract BHET in white solid form from the product. The effect of three operating conditions namely crystallization time, crystallization temperatures and amount of distilled water used to the yield of crystallization process were investigated. The purity of crystallization products were analyzed using HPLC and DSC. The optimum conditions of 3 hours crystallization time, 2 °C crystallization temperature and 5:1 mass ratio of distilled water used to glycolize solid gave the highest yield and purity of the crystallization process. © 2015 BCREC UNDIP. All rights reservedReceived: 12nd August 2014; Revised: 4th February 2015; Accepted: 5th February 2015How to Cite: Goh, H.W., Salmiaton, A., Abdullah, N., Idris, A. (2015. Time, Temperature and Amount of Distilled Water Effects on the Purity and Yield of Bis(2-hydroxyethyl Terephthalate Purification System. Bulletin of Chemical Reaction Engineering & Catalysis, 10 (2: 143-154. (doi:10.9767/bcrec.10.2.7195.143-154 Permalink/DOI: http://dx.doi.org/10.9767/bcrec.10.2.7195.143-154  

Direct economic benefits associated with dietetic internships.

Science.gov (United States)

Conklin, M T; Simko, M D

1994-02-01

We explored the direct economic benefits of hospital dietetics departments sponsoring an internship for dietetics studies. Forty-five dietetics departments in US hospitals participated in a mail survey that involved comprehensive data collection procedures using three instruments, including activity logs recorded by 298 dietitians and interns. Direct benefits were defined as the net student labor provided to the department during routine and staff relief experiences that released professional labor for other work. Net student productivity during routine assignments was calculated by subtracting the time dietitians spent teaching during a typical work week from the amount of time dietetic interns spent performing professional services without direct supervision. Student productivity during staff relief rotations was calculated by multiplying the number of students assigned to this type of experience by the length of the rotation. While involved in routine learning experiences, dietetic interns provided a direct benefit. The difference between the time interns spent in independent, professional service in the departments and the time dietitians spent in activities designed specifically for teaching was a mean of 29 hours in favor of the students. All departments received a direct benefit from assigning dietetic interns to a staff relief rotation. The median number of weeks of student labor gained by the departments per year was 24. A paired t test was used to analyze the difference between the time dietitians devoted to teaching interns and the time students spent in independent, professional service in the departments. The difference was very highly significant (P impact of their supervised practice program on the sponsoring organization.

Analysis on the time/activity curve of salivary gland scintigraphy in salivary gland diseases; The correlation between the pattern of time/activity curve and the amount of saliva

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Kazufumi; Hosokawa, Yoichiro; Kaneko, Masanori; Ohmori, Keiichi; Minowa, Kazuyuki; Fukuda, Hiroshi; Yamasaki, Michio (Hokkaido Univ., Sapporo (Japan). School of Dentistry)

1992-04-01

Salivary gland scintigraphy with {sup 99m}TcO{sub 4}{sup -} is a simple method to evaluate salivary gland function and has been available as a technique using a time/activity curve for a number of years. But, there were few reports on the relationship between the various patterns of the time/activity curves and the salivary flow rate from the gland. This presents correlation between the time/activity curve pattern and the salivary flow rate from the parotid gland. Sixty-five patients complaining of xerostomia were examined. Sixty-two were female and 3 male (average age 45.6 years, range 17-69 years). Their diagnosis were 26 Sjoegren Syndrome, 28 suspicion of Sjoegren Syndrome and 11 parotiditis. The salivary flow rate from parotid gland was measured by stimulation with 10% citric acid using modified Carlson crittenden cup every 10 seconds for 5 min. 185 MBq {sup 99m}TcO{sub 4}{sup -} was injected intravenously and sequential scintigraphy was performed. Time/activity curves were recorded on film. Six kinds of basic patterns were as follows: normal pattern, median pattern, flat pattern and sloped pattern (Mita et al 1981), reaccumulation flat pattern and poor secretion (Stimulant secretory ratio: less than 70%) pattern by us. The amount of saliva was as follows: normal pattern (n=31), 5.4+0.4 ml; reaccumulation flat pattern (n=3), 4.2+0.6 ml; poor secretion pattern (n=18), 4.1+0.5 ml; median pattern (n=20), 3.5+0.5 ml; flat pattern (n=11), 2.6+0.5 ml and sloped pattern (n=1), 1.5 ml. Normal pattern versus poor secretion pattern, median pattern and flat pattern in the salivary flow rate were statistically significant as determined by Students' t-test. We assessed the correlation between the pattern of time/activity curve in the salivary gland scintigraphy and the amount of saliva. (author).

Univariate time series modeling and an application to future claims amount in SOCSO's invalidity pension scheme

Science.gov (United States)

Chek, Mohd Zaki Awang; Ahmad, Abu Bakar; Ridzwan, Ahmad Nur Azam Ahmad; Jelas, Imran Md.; Jamal, Nur Faezah; Ismail, Isma Liana; Zulkifli, Faiz; Noor, Syamsul Ikram Mohd

2012-09-01

The main objective of this study is to forecast the future claims amount of Invalidity Pension Scheme (IPS). All data were derived from SOCSO annual reports from year 1972 - 2010. These claims consist of all claims amount from 7 benefits offered by SOCSO such as Invalidity Pension, Invalidity Grant, Survivors Pension, Constant Attendance Allowance, Rehabilitation, Funeral and Education. Prediction of future claims of Invalidity Pension Scheme will be made using Univariate Forecasting Models to predict the future claims among workforce in Malaysia.

76 FR 42038 - Determining the Amount of Taxes Paid for Purposes of the Foreign Tax Credit

Science.gov (United States)

2011-07-18

... investment condition''). The direct investment condition requires that the U.S. party's share of the foreign...) of this section if the foreign payment were an amount of tax paid. (3) Direct investment. The U.S... claim direct and indirect foreign tax credits. DATES: Effective Date: These regulations are effective on...

Continuous-Time Classical and Quantum Random Walk on Direct Product of Cayley Graphs

International Nuclear Information System (INIS)

Salimi, S.; Jafarizadeh, M. A.

2009-01-01

In this paper we define direct product of graphs and give a recipe for obtaining probability of observing particle on vertices in the continuous-time classical and quantum random walk. In the recipe, the probability of observing particle on direct product of graph is obtained by multiplication of probability on the corresponding to sub-graphs, where this method is useful to determining probability of walk on complicated graphs. Using this method, we calculate the probability of continuous-time classical and quantum random walks on many of finite direct product Cayley graphs (complete cycle, complete K n , charter and n-cube). Also, we inquire that the classical state the stationary uniform distribution is reached as t → ∞ but for quantum state is not always satisfied. (general)

Learning the Structure of Bayesian Network from Small Amount of Data

Directory of Open Access Journals (Sweden)

Bogdan COCU

2009-12-01

Full Text Available Many areas of artificial intelligence must handling with imperfection ofinformation. One of the ways to do this is using representation and reasoning withBayesian networks. Creation of a Bayesian network consists in two stages. First stage isto design the node structure and directed links between them. Choosing of a structurefor network can be done either through empirical developing by human experts orthrough machine learning algorithm. The second stage is completion of probabilitytables for each node. Using a machine learning method is useful, especially when wehave a big amount of leaning data. But in many fields the amount of data is small,incomplete and inconsistent. In this paper, we make a case study for choosing the bestlearning method for small amount of learning data. Means more experiments we dropconclusion of using existent methods for learning a network structure.

The European Working Time Directive: a practical review for surgical trainees.

Science.gov (United States)

Fitzgerald, J E F; Caesar, B C

2012-01-01

The European Working Time Directive (EWTD) 2003/88/EC is a Union Directive laying down minimum health and safety requirements for the organisation of working time. Originally primarily intended as labour law, its progressive introduction up to full implementation for doctors-in-training in August 2009 has substantially reduced duty-hours and caused widespread concern in surgery. Detrimental effects on the continuity of patient care, reduced availability of medical staff with associated rota difficulties, and the reduction in time for training junior doctors have been widely cited. Craft-specialities such as surgery and those providing an acute service have faced particular challenges. This review offers a practical guide for surgical trainees, explaining the European regulations in the context of current terms and conditions of doctor's employment in the UK. Information is provided on protecting training, opting-out, seeking remuneration for this, and ensuring doctors and patients are protected with appropriate medical indemnity cover in place. Copyright © 2012 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

Direct determination of scattering time delays using the R-matrix propagation method

International Nuclear Information System (INIS)

Walker, R.B.; Hayes, E.F.

1989-01-01

A direct method for determining time delays for scattering processes is developed using the R-matrix propagation method. The procedure involves the simultaneous generation of the global R matrix and its energy derivative. The necessary expressions to obtain the energy derivative of the S matrix are relatively simple and involve many of the same matrix elements required for the R-matrix propagation method. This method is applied to a simple model for a chemical reaction that displays sharp resonance features. The test results of the direct method are shown to be in excellent agreement with the traditional numerical differentiation method for scattering energies near the resonance energy. However, for sharp resonances the numerical differentiation method requires calculation of the S-matrix elements at many closely spaced energies. Since the direct method presented here involves calculations at only a single energy, one is able to generate accurate energy derivatives and time delays much more efficiently and reliably

Estimation of the Required Amount of Superconductors for High-field Accelerator Dipole Magnets

CERN Document Server

Schwerg, N

2007-01-01

The coil size and the corresponding amount of superconducting material that is used during the design process of a magnet cross-section have direct impacts on the overall magnet cost. It is therefore of interest to estimate the minimum amount of conductors needed to reach the defined field strength before a detailed design process starts. Equally, it is useful to evaluate the efficiency of a given design by calculating the amount of superconducting cables that are used to reach the envisaged main field by simple rule. To this purpose, the minimum amount of conductors for the construction of a dipole of given main field strength and aperture size is estimated taking the actual critical current density of the used strands into account. Characteristic curves applicable for the NED Nb$_{3}$Sn strand specification are given and some of the recently studied different dipole configurations are compared. Based on these results, it is shown how the required amount of conductors changes due to the iron yoke contributio...

Future mission studies: Forecasting solar flux directly from its chaotic time series

Science.gov (United States)

Ashrafi, S.

1991-01-01

The mathematical structure of the programs written to construct a nonlinear predictive model to forecast solar flux directly from its time series without reference to any underlying solar physics is presented. This method and the programs are written so that one could apply the same technique to forecast other chaotic time series, such as geomagnetic data, attitude and orbit data, and even financial indexes and stock market data. Perhaps the most important application of this technique to flight dynamics is to model Goddard Trajectory Determination System (GTDS) output of residues between observed position of spacecraft and calculated position with no drag (drag flag = off). This would result in a new model of drag working directly from observed data.

Direct Transesterification of Soy Biomass for Biodiesel Preparation

International Nuclear Information System (INIS)

Nyan Lin Htat; Moe Moe Kyaw

2011-12-01

In this study, three types of transesterification processes such as conventional base-catalyzed transesterification, conventional solvent- assisted base-catalyzed transesterification and solvent-assisted direct transesterification were studied. As for triglyceride source, refined soya oil was used for first two processes and soy biomass containing appreciable amount of gum was used for direct transesterification process. Methonal was used as alcohol source and ketone-base cosolvent and acetate-base cosolvent were used as cosolvent sources. It was found that the reaction time taken were within 8 to 45 min after oil extraction time 1.5 hr in solvent-assisted direct transesterification process. Time taken for conventional solvent-assisted base-catalyzed transesterification was found to be 1.33 to 8.5 min and, 15 mim and 30 min for conventional base-catalyzed transesterification process. According to yield percenttages of conventional solvent-assisted base-catalyzed transesterification and solvent-assisted direct transesterification by using ketone-base cosolvent and acetate-base cosolvent, acetate-base cosolvent gave the higher yields of biodiesel fuel (BDF) 99.4% and 73.78% repectively. From this investigation it could be seen that solvent assisted direct transesterification process achieved higher overall yield of BDF by comparing with the other transesterification processes when yields were based on soy biomass.

What does an intern doctor actually do? A quantification of time on work activities

Directory of Open Access Journals (Sweden)

James Jia Jun Chen

2017-12-01

Full Text Available Background Interns, or first year junior doctors, have traditionally been used as an adaptable frontline solution to many of the changes in healthcare, utilising their broad skill sets for both direct patient care and administrative burdens. While there are studies that focus on the total hours junior doctors work, there are few that analyse the specific tasks they do and how they dedicate their work time. Aims We aim to quantify the amount of time intern doctors spent on specific tasks during a shift. Methods This is a multi-centred, retrospective, self-reported study that was carried out in a public tertiary hospital network in Western Australia, comprising one tertiary, two metropolitan, and three regional hospitals. 68 individual shifts were reported, accounting for 605.72 hours. Participants reported time spent, in fifteen minute segments, on categories grossly defined as clerical tasks, clinical tasks, teaching, and personal time. Participants were also asked about their satisfaction with the amount of clinical exposure during the reported shift. Results Direct patient care accounted for 22 per cent of total shift time, indirect care 74 per cent, and personal time 4 per cent. Discharge summaries accounted for the most time-per-shift at 26 per cent, followed by medical note documentation at 14 per cent, with the least being teaching at 2 per cent. Direct patient contact by interns during a shift was on average 12 per cent (SD 14 per cent. 12 interns or 18 per cent of all responses reported no direct patient contact (0 per cent during a shift. Interns working in emergency medicine spent 44 per cent of their shift on direct patient contact, significantly more compared to their medicine and surgical colleagues. Conclusion Indirect care activities consume almost three times as much time as direct care activities. Interns are mostly unsatisfied with their amount of clinical exposure per shift. The results concur with the current literature of

Characterizing system dynamics with a weighted and directed network constructed from time series data

International Nuclear Information System (INIS)

Sun, Xiaoran; Small, Michael; Zhao, Yi; Xue, Xiaoping

2014-01-01

In this work, we propose a novel method to transform a time series into a weighted and directed network. For a given time series, we first generate a set of segments via a sliding window, and then use a doubly symbolic scheme to characterize every windowed segment by combining absolute amplitude information with an ordinal pattern characterization. Based on this construction, a network can be directly constructed from the given time series: segments corresponding to different symbol-pairs are mapped to network nodes and the temporal succession between nodes is represented by directed links. With this conversion, dynamics underlying the time series has been encoded into the network structure. We illustrate the potential of our networks with a well-studied dynamical model as a benchmark example. Results show that network measures for characterizing global properties can detect the dynamical transitions in the underlying system. Moreover, we employ a random walk algorithm to sample loops in our networks, and find that time series with different dynamics exhibits distinct cycle structure. That is, the relative prevalence of loops with different lengths can be used to identify the underlying dynamics

Characterizing system dynamics with a weighted and directed network constructed from time series data

Energy Technology Data Exchange (ETDEWEB)

Sun, Xiaoran, E-mail: sxr0806@gmail.com [Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055 (China); School of Mathematics and Statistics, The University of Western Australia, Crawley WA 6009 (Australia); Small, Michael, E-mail: michael.small@uwa.edu.au [School of Mathematics and Statistics, The University of Western Australia, Crawley WA 6009 (Australia); Zhao, Yi [Shenzhen Graduate School, Harbin Institute of Technology, Shenzhen 518055 (China); Xue, Xiaoping [Department of Mathematics, Harbin Institute of Technology, Harbin 150025 (China)

2014-06-15

In this work, we propose a novel method to transform a time series into a weighted and directed network. For a given time series, we first generate a set of segments via a sliding window, and then use a doubly symbolic scheme to characterize every windowed segment by combining absolute amplitude information with an ordinal pattern characterization. Based on this construction, a network can be directly constructed from the given time series: segments corresponding to different symbol-pairs are mapped to network nodes and the temporal succession between nodes is represented by directed links. With this conversion, dynamics underlying the time series has been encoded into the network structure. We illustrate the potential of our networks with a well-studied dynamical model as a benchmark example. Results show that network measures for characterizing global properties can detect the dynamical transitions in the underlying system. Moreover, we employ a random walk algorithm to sample loops in our networks, and find that time series with different dynamics exhibits distinct cycle structure. That is, the relative prevalence of loops with different lengths can be used to identify the underlying dynamics.

The Amount of Time Dilation for Visual Flickers Corresponds to the Amount of Neural Entrainments Measured by EEG.

Science.gov (United States)

Hashimoto, Yuki; Yotsumoto, Yuko

2018-01-01

The neural basis of time perception has long attracted the interests of researchers. Recently, a conceptual model consisting of neural oscillators was proposed and validated by behavioral experiments that measured the dilated duration in perception of a flickering stimulus (Hashimoto and Yotsumoto, 2015). The model proposed that flickering stimuli cause neural entrainment of oscillators, resulting in dilated time perception. In this study, we examined the oscillator-based model of time perception, by collecting electroencephalography (EEG) data during an interval-timing task. Initially, subjects observed a stimulus, either flickering at 10-Hz or constantly illuminated. The subjects then reproduced the duration of the stimulus by pressing a button. As reported in previous studies, the subjects reproduced 1.22 times longer durations for flickering stimuli than for continuously illuminated stimuli. The event-related potential (ERP) during the observation of a flicker oscillated at 10 Hz, reflecting the 10-Hz neural activity phase-locked to the flicker. Importantly, the longer reproduced duration was associated with a larger amplitude of the 10-Hz ERP component during the inter-stimulus interval, as well as during the presentation of the flicker. The correlation between the reproduced duration and the 10-Hz oscillation during the inter-stimulus interval suggested that the flicker-induced neural entrainment affected time dilation. While the 10-Hz flickering stimuli induced phase-locked entrainments at 10 Hz, we also observed event-related desynchronizations of spontaneous neural oscillations in the alpha-frequency range. These could be attributed to the activation of excitatory neurons while observing the flicker stimuli. In addition, neural activity at approximately the alpha frequency increased during the reproduction phase, indicating that flicker-induced neural entrainment persisted even after the offset of the flicker. In summary, our results suggest that the

76 FR 53818 - Determining the Amount of Taxes Paid for Purposes of the Foreign Tax Credit; Correction

Science.gov (United States)

2011-08-30

... regulations affect individuals and corporations that claim direct and indirect foreign tax credits. DATES... Determining the Amount of Taxes Paid for Purposes of the Foreign Tax Credit; Correction AGENCY: Internal... determination of the amount of taxes paid for purposes of the foreign tax credit. These regulations address...

Transient Stability Assessment of Power System with Large Amount of Wind Power Penetration

DEFF Research Database (Denmark)

Liu, Leo; Chen, Zhe; Bak, Claus Leth

2012-01-01

Recently, the security and stability of power system with large amount of wind power are the concerned issues, especially the transient stability. In Denmark, the onshore and offshore wind farms are connected to distribution system and transmission system respectively. The control and protection...... methodologies of onshore and offshore wind farms definitely affect the transient stability of power system. In this paper, the onshore and offshore wind farms are modeled in detail in order to assess the transient stability of western Danish power system. Further, the computation of critical clearing time (CCT...... plants, load consumption level and high voltage direct current (HVDC) transmission links are taken into account. The results presented in this paper are able to provide an early awareness of power system security condition of the western Danish power system....

The Reduction of Directed Cyclic Graph for Task Assignment Problem

Directory of Open Access Journals (Sweden)

Ariffin W.N.M.

2018-01-01

Full Text Available In this paper, a directed cyclic graph (DCG is proposed as the task graph. It is undesirable and impossible to complete the task according to the constraints if the cycle exists. Therefore, an effort should be done in order to eliminate the cycle to obtain a directed acyclic graph (DAG, so that the minimum amount of time required for the entire task can be found. The technique of reducing the complexity of the directed cyclic graph to a directed acyclic graph by reversing the orientation of the path is the main contribution of this study. The algorithm was coded using Java programming and consistently produced good assignment and task schedule.

Safe handling of kilogram amounts of fuel-grade plutonium and of gram amounts of plutonium-238, americium-241 and curium-244

International Nuclear Information System (INIS)

Louwrier, K.P.; Richter, K.

1976-01-01

During the past 10 years about 600 glove-boxes have been installed at the Institute for Transuranium Elements at Karlsruhe. About 80% of these glove-boxes have been designed and equipped for handling 100-g to 1-kg amounts of 239 Pu containing 8-12% 240 Pu (low-exposure plutonium). A small proportion of the glove-boxes is equipped with additional shielding in the form of lead sheet or lead glass for work with recycled plutonium. In these glove-boxes gram-amounts of 241 Am have also been handled for preparation of Al-Am targets using tongs and additional shielding inside the glove-boxes themselves. Water- and lead-shielded glove-boxes equipped with telemanipulators have been installed for routine work with gram-amounts of 241 Am, 243 Am and 244 Cm. A prediction of the expected radiation dose for the personnel is difficult and only valid for a preparation procedure with well-defined preparation steps, owing to the fact that gamma dose-rates depend strongly upon proximity and source seize. Gamma radiation dose measurements during non-routine work for 241 Am target preparation showed that handling of gram amounts leads to a rather high irradiation dose for the personnel, despite lead or steel glove-box shielding and shielding within the glove-boxes. A direct glove-hand to americium contact must be avoided. For all glove-handling of materials with gamma radiation an irradiation control of the forearms of the personnel by, for example, thermoluminescence dosimeters is necessary. Routine handling of americium and curium should be executed with master-slave equipment behind neutron and gamma shielding. (author)

IOS APPLICATION FOR FINDING HALAL FOOD, MOSQUE, QIBLA DIRECTION AND PRAYER TIME

Directory of Open Access Journals (Sweden)

Febria Roosita Dwi

2015-01-01

Full Text Available Muslim sometimes has trouble when they travel to a new place for find where the location of the halal food and mosque near their location is. Other things that Muslim will have difficulty when they travel in to a new place are find the Qibla direction, pray time in local time and the mosque location near their location. From that problem MLH (Muslim Little Helper want to help them to solve their problem. The process is carried out as follows: The app get the user location, send the location to the YELP API server and muslimshalat.com API to get the location of halal food, and mosque (using YELP and for find the direction of Qibla and the prayer schedule (by using muslimshalat.com API. After the system get the data, then it will show on the Map (using apple map inside the app and put the data as marker. For the Qibla direction and prayer time, it will show in arrow image and listview. This app will be use Swift for the development language. The test result shows that the YELP API can be use only in USA, and internet play as the main rule in this app, because to create connection to the server to pull the data, the system need internet to pass all the data to server.

Self-directed learning in gross human anatomy: assessment outcomes and student perceptions.

Science.gov (United States)

Smythe, Gayle; Hughes, Diane

2008-01-01

Speech pathology students enrolled in a lecture-based gross human anatomy program completed two out of nine topics in self-directed mode. Student performance in quizzes was compared for the two modes, and the students completed questionnaires on their perceptions of the self-directed mode of delivery. Students performed as well in the first self-directed topic as they did in lecture-based material, but performance declined significantly on the second self-directed topic. Correlations showed that students who performed well in lecture-based topics also performed well on self-directed topics. The major issues that arose in the student questionnaires were primarily related to the amount of content in the topics and the length of time required for completion. We conclude that there is a strong need for appropriate design of distance education materials to reflect student perceptions of length, content, and time investment, and more importantly that there is a need to ensure extensive communication and support of students studying in distance education/self-directed modes for the first time.

Antitumor effectiveness of different amounts of electrical charge in Ehrlich and fibrosarcoma Sa-37 tumors

International Nuclear Information System (INIS)

Ciria, HC; Quevedo, MS; Cabrales, LB; Bruzón, RP; Salas, MF; Pena, OG; González, TR; López, DS; Flores, JM

2004-01-01

In vivo studies were conducted to quantify the effectiveness of low-level direct electric current for different amounts of electrical charge and the survival rate in fibrosarcoma Sa-37 and Ehrlich tumors, also the effect of direct electric in Ehrlich tumor was evaluate through the measurements of tumor volume and the peritumoral and tumoral findings. BALB/c male mice, 7–8 week old and 20–22 g weight were used. Ehrlich and fibrosarcoma Sa-37 cell lines, growing in BALB/c mice. Solid and subcutaneous Ehrlich and fibrosarcoma Sa-37 tumors, located dorsolaterally in animals, were initiated by the inoculation of 5 × 10 6 and 1 × 10 5 viable tumor cells, respectively. For each type of tumor four groups (one control group and three treated groups) consisting of 10 mice randomly divided were formed. When the tumors reached approximately 0.5 cm 3 , four platinum electrodes were inserted into their bases. The electric charge delivered to the tumors was varied in the range of 5.5 to 110 C/cm 3 for a constant time of 45 minutes. An additional experiment was performed in BALB/c male mice bearing Ehrlich tumor to examine from a histolological point of view the effects of direct electric current. A control group and a treated group with 77 C/cm 3 (27.0 C in 0.35 cm 3 ) and 10 mA for 45 min were formed. In this experiment when the tumor volumes reached 0.35 cm 3 , two anodes and two cathodes were inserted into the base perpendicular to the tumor long axis. Significant tumor growth delay and survival rate were achieved after electrotherapy and both were dependent on direct electric current intensity, being more marked in fibrosarcoma Sa-37 tumor. Complete regressions for fibrosarcoma Sa-37 and Ehrlich tumors were observed for electrical charges of 80 and 92 C/cm 3 , respectively. Histopathological and peritumoral findings in Ehrlich tumor revealed in the treated group marked tumor necrosis, vascular congestion, peritumoral neutrophil infiltration, an acute inflammatory

Effect of Timing and Amount of Irrigation Water on Bean Yield and Water Use Efficiency in Arid and Semi-arid Conditions

Directory of Open Access Journals (Sweden)

S.S. Nurbakhsh

2016-02-01

Full Text Available Introduction: Nowadays, due to lack of water resources and increasing demand for water, agricultural water planning issues need further consideration. With proper planning and determination of irrigation depth and time, the effects of stress and yield loss on the plants are reduced. Irrigation scheduling is one of the most important factors in crop’s quality and quantity. The main objective of irrigation scheduling is to control crop’s water conditions in order to achieve its optimum yield level. So irrigation timing is the vital factor on which crop water stress and eventually yield's level are dependent upon. Moreover, irrigation timing is used in irrigation scheduling. The aim of this study was to evaluate the effect of irrigation time on water consumption, water use efficiency and yield of beans. Materials and Methods: In order to observe the effect of the amount and the time of the irrigation on water consumption, yields rate and water use efficiency, the current research was carried out at the University of Shahrekord during the summer of 2012. The experiment was done as a completely randomized design with 4 repetitions consisting of irrigation time and the amount of irrigation in 4 and 2 levels (at 6, 8, 14 and 18 and (deficit irrigation, full irrigation, respectively. Beans seeds were planted in 32 similar vases with a diameter of 45 cm and height of 60 cm, in each experiment. Treatments were begun after 37 days from planting. Treatments were irrigated when the average moisture in the root zone was equal to the lower border of readily available water of full irrigation. At the end of the experiments, plants were completely harvested. Then the plant’s height, number of branches, numbers of pods per plant, pod and seed weight were measured. Results and Discussion: Results showed that irrigating at different times during the day influenced water use efficiency, water consumption, seeds yield and number of pods in the bush. The water

Participant observation of time allocation, direct patient contact and simultaneous activities in hospital physicians

Directory of Open Access Journals (Sweden)

Zupanc Andrea

2009-06-01

Full Text Available Abstract Background Hospital physicians' time is a critical resource in medical care. Two aspects are of interest. First, the time spent in direct patient contact – a key principle of effective medical care. Second, simultaneous task performance ('multitasking' which may contribute to medical error, impaired safety behaviour, and stress. There is a call for instruments to assess these aspects. A preliminary study to gain insight into activity patterns, time allocation and simultaneous activities of hospital physicians was carried out. Therefore an observation instrument for time-motion-studies in hospital settings was developed and tested. Methods 35 participant observations of internists and surgeons of a German municipal 300-bed hospital were conducted. Complete day shifts of hospital physicians on wards, emergency ward, intensive care unit, and operating room were continuously observed. Assessed variables of interest were time allocation, share of direct patient contact, and simultaneous activities. Inter-rater agreement of Kappa = .71 points to good reliability of the instrument. Results Hospital physicians spent 25.5% of their time at work in direct contact with patients. Most time was allocated to documentation and conversation with colleagues and nursing staff. Physicians performed parallel simultaneous activities for 17–20% of their work time. Communication with patients, documentation, and conversation with colleagues and nursing staff were the most frequently observed simultaneous activities. Applying logit-linear analyses, specific primary activities increase the probability of particular simultaneous activities. Conclusion Patient-related working time in hospitals is limited. The potential detrimental effects of frequently observed simultaneous activities on performance outcomes need further consideration.

42 CFR 422.382 - Minimum net worth amount.

Science.gov (United States)

2010-10-01

... that CMS considers appropriate to reduce, control or eliminate start-up administrative costs. (b) After... section. (c) Calculation of the minimum net worth amount—(1) Cash requirement. (i) At the time of application, the organization must maintain at least $750,000 of the minimum net worth amount in cash or cash...

Nuclear waste in a repository: amount as a factor in risk duration

International Nuclear Information System (INIS)

Zen, E.

1980-01-01

The relationship between the amount of nuclear waste in a nuclear repository and the safety of the repository is examined. It is shown that the amount of a given hazardous nuclide that is potentially leachable depends on the initial amount of waste in the repository and the time that has elapsed since the repository was put into operation. Nuclear repository safety can be enhanced if repositories are designed as modular units with leach-resistant watertight compartments

Direct Adaptive Control of a Class of Nonlinear Discrete-Time Systems

DEFF Research Database (Denmark)

Bendtsen, Jan Dimon

2004-01-01

In this paper we deal with direct adaptive control of a specific class of discrete-time SISO systems, where the nonlinearities are convex and an upper bound is known. We use a control law based on a linear combination of a set of globally uniformly bounded basis functions with compact support, wh...

Influence of decrease of the amount of starting salary of radiological technologists

International Nuclear Information System (INIS)

Shibuya, Koichi; Kato, Hirokazu

2010-01-01

This paper analyzes differences and changes within and between the occupation of nurses, radiological technologists, and medical technologists concerning starting salary from April 2005 to March 2009. This paper also investigates the percentage of difference in the amount of starting salary of nurses, radiological technologists, and medical technologists according to their educational attainments. The research-target used was the full-time-job-opening data provided to Okayama University within the given period of time, which specifies the amount of starting salary. The result shows that one's educational background has a crucial influence on the amount of one's starting salary. In fact, the percentage of the amount of starting salary base on one's educational attainment all increased in nurses, radiological technologists, and medical technologists from April 2007 to March 2009. However, this percentage for radiological technologists remains only 50% of increase, which was less significant than other two professional occupations. Moreover, the result indicates a crucial change in the amount of basic starting salary: while the amount of basic starting salary of nurses in 2008 has increased since 2005, that of radiological technologists has dropped remarkably. If this situation is not improved in the near future, the health-service sector may experience a decrease in the number of skilled practitioners which, in turn, will result in a decline in quality of medical care. (author)

Maximizing time from the constraining European Working Time Directive (EWTD): The Heidelberg New Working Time Model.

Science.gov (United States)

Schimmack, Simon; Hinz, Ulf; Wagner, Andreas; Schmidt, Thomas; Strothmann, Hendrik; Büchler, Markus W; Schmitz-Winnenthal, Hubertus

2014-01-01

The introduction of the European Working Time Directive (EWTD) has greatly reduced training hours of surgical residents, which translates into 30% less surgical and clinical experience. Such a dramatic drop in attendance has serious implications such compromised quality of medical care. As the surgical department of the University of Heidelberg, our goal was to establish a model that was compliant with the EWTD while avoiding reduction in quality of patient care and surgical training. We first performed workload analyses and performance statistics for all working areas of our department (operation theater, emergency room, specialized consultations, surgical wards and on-call duties) using personal interviews, time cards, medical documentation software as well as data of the financial- and personnel-controlling sector of our administration. Using that information, we specifically designed an EWTD-compatible work model and implemented it. Surgical wards and operating rooms (ORs) were not compliant with the EWTD. Between 5 pm and 8 pm, three ORs were still operating two-thirds of the time. By creating an extended work shift (7:30 am-7:30 pm), we effectively reduced the workload to less than 49% from 4 pm and 8 am, allowing the combination of an eight-hour working day with a 16-hour on call duty; thus, maximizing surgical resident training and ensuring patient continuity of care while maintaining EDTW guidelines. A precise workload analysis is the key to success. The Heidelberg New Working Time Model provides a legal model, which, by avoiding rotating work shifts, assures quality of patient care and surgical training.

Chaotification of Quasi-zero Stiffness System Via Direct Time-delay Feedback

Directory of Open Access Journals (Sweden)

Shuyong Liu

2013-03-01

Full Text Available This paper presents a chaotification method based on direct time-delay feedback control for a quasi-zero-stiffness isolation system. An analytical function of time-delay feedback control is derived based on differential-geometry control theory. Furthermore, the feasibility and effectiveness of this method was verified by numerical simulations. Numerical simulations show that this method holds the favorable aspects including the advantage of using tiny control gain, the capability of chaotifying across a large range of parametric domain and the high feasibility of the control implement.

First direct observation of time-reversal violation

International Nuclear Information System (INIS)

Angelopoulos, A.; Apostolakis, A.; Aslanides, E.; Bertin, V.; Ealet, A.; Henry-Couannier, F.; Le Gac, R.; Montanet, F.; Touchard, F.; Backenstoss, G.; Benelli, A.; Kokkas, P.; Leimgruber, F.; Pavlopoulos, P.; Polivka, G.; Rickenbach, R.; Schietinger, T.; Tauscher, L.; Vlachos, S.; Bargassa, P.

2000-01-01

Using its unique capability of strangeness tagging at K 0 production in pp-bar→K ± π ± K 0 (K-bar) 0 ) and at decay with the lepton charge in semileptonic decays CPLEAR measured the semileptonic decay-rate asymmetry (R(K-bar) 0 →e + π - ν)-R(K 0 →e - π + ν-bar)/R(K-bar) 0 →e + π - ν)+R(K 0 →e - π + ν-bar). The asymmetry, fitted over the eigentime interval 1-20 τ S , yielded a non-zero result of (6.6±1.3 stat ±1.1 syst )x10 -3 . A thorough phenomenological analysis identifies T violation in K 0 mixing and/or CPT violation in semileptonic decays as possible interpretations. A confrontation with world data on neutral kaon decays, however, excludes the latter with sufficient precision to establish the result as the first direct observation of time reversal non-invariance

Amount of Time to Eat Lunch Is Associated with Children's Selection and Consumption of School Meal Entrée, Fruits, Vegetables, and Milk.

Science.gov (United States)

Cohen, Juliana F W; Jahn, Jaquelyn L; Richardson, Scott; Cluggish, Sarah A; Parker, Ellen; Rimm, Eric B

2016-01-01

There are currently no national standards for school lunch period length and little is known about the association between the amount of time students have to eat and school food selection and consumption. Our aim was to examine plate-waste measurements from students in the control arm of the Modifying Eating and Lifestyles at School study (2011 to 2012 school year) to determine the association between amount of time to eat and school meal selection and consumption. We used a prospective study design using up to six repeated measures among students during the school year. One thousand and one students in grades 3 to 8 attending six participating elementary and middle schools in an urban, low-income school district where lunch period lengths varied from 20 to 30 minutes were included. School food selection and consumption were collected using plate-waste methodology. Logistic regression and mixed-model analysis of variance was used to examine food selection and consumption. Compared with meal-component selection when students had at least 25 minutes to eat, students were significantly less likely to select a fruit (44% vs 57%; Peat. There were no significant differences in entrée, milk, or vegetable selections. Among those who selected a meal component, students with eat consumed 13% less of their entrée (Peat. During the school year, a substantial number of students had insufficient time to eat, which was associated with significantly decreased entrée, milk, and vegetable consumption compared with students who had more time to eat. School policies that encourage lunches with at least 25 minutes of seated time might reduce food waste and improve dietary intake. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Neuro-economics in chicks: foraging choices based on amount, delay and cost.

Science.gov (United States)

Matsushima, Toshiya; Kawamori, Ai; Bem-Sojka, Tiaza

2008-06-15

Studies on the foraging choices are reviewed, with an emphasis on the neural representations of elementary factors of food (i.e., amount, delay and consumption time) in the avian brain. Domestic chicks serve as an ideal animal model in this respect, as they quickly associate cue colors with subsequently supplied food rewards, and their choices are quantitatively linked with the rewards. When a pair of such color cues was simultaneously presented, the trained chicks reliably made choices according to the profitability of food associated with each color. Two forebrain regions are involved in distinct aspects of choices; i.e., nucleus accumbens-medial striatum (Ac-MSt) and arcopallium intermedium (AI), an association area in the lateral forebrain. Localized lesions of Ac-MSt enhanced delay aversion, and the ablated chicks made impulsive choices of immediate reward more frequently than sham controls. On the other hand, lesions of AI enhanced consumption-time aversion, and the ablated chicks shifted their choices toward easily consumable reward with their impulsiveness unchanged; delay and consumption time are thus doubly dissociated. Furthermore, chicks showed distinct patterns of risk-sensitive choices depending on the factor that varied at trials. Risk aversion occurred when food amount varied, whereas consistent risk sensitivity was not found when the delay varied; amount and delay were not interchangeable. Choices are thus deviated from those predicted as optima. Instead, factors such as amount, delay and consumption time could be separately represented and processed to yield economically sub-optimal choices.

Directional spectrum of ocean waves from array measurements using phase/time/path difference methods

Digital Repository Service at National Institute of Oceanography (India)

Fernandes, A.A.; Sarma, Y.V.B.; Menon, H.B.

Wave direction has for the first time been consistently, accurately and unambiguously evaluated from array measurements using the phase/time/path difference (PTPD) methods of Esteva in case of polygonal arrays and Borgman in case of linear arrays...

Effects of timing of signal indicating jump directions on knee biomechanics in jump-landing-jump tasks.

Science.gov (United States)

Stephenson, Mitchell L; Hinshaw, Taylour J; Wadley, Haley A; Zhu, Qin; Wilson, Margaret A; Byra, Mark; Dai, Boyi

2018-03-01

A variety of the available time to react (ATR) has been utilised to study knee biomechanics during reactive jump-landing tasks. The purpose was to quantify knee kinematics and kinetics during a jump-land-jump task of three possible directions as the ATR was reduced. Thirty-four recreational athletes performed 45 trials of a jump-land-jump task, during which the direction of the second jump (lateral, medial or vertical) was indicated before they initiated the first jump, the instant they initiated the first jump, 300 ms before landing, 150 ms before landing or at the instant of landing. Knee joint angles and moments close to the instant of landing were significantly different when the ATR was equal to or more than 300 ms before landing, but became similar when the ATR was 150 ms or 0 ms before landing. As the ATR was decreased, knee moments decreased for the medial jump direction, but increased for the lateral jump direction. When the ATR is shorter than an individual's reaction time, the movement pattern cannot be pre-planned before landing. Knee biomechanics are dependent on the timing of the signal and the subsequent jump direction. Precise control of timing and screening athletes with low ATR are suggested.

Real-time generation of kd-trees for ray tracing using DirectX 11

OpenAIRE

Säll, Martin; Cronqvist, Fredrik

2017-01-01

Context. Ray tracing has always been a simple but effective way to create a photorealistic scene but at a greater cost when expanding the scene. Recent improvements in GPU and CPU hardware have made ray tracing faster, making more complex scenes possible with the same amount of time needed to process the scene. Despite the improvements in hardware ray tracing is still rarely run at a interactive speed. Objectives. The aim of this experiment was to implement a new kdtree generation algorithm us...

Sports Direct to appoint full-time nurse after inquiry into employment practices.

Science.gov (United States)

2016-09-14

Retailer Sports Direct is to appoint a full-time nurse at its vast warehouse in response to concerns about health and safety. The firm was the subject of a House of Commons business, innovation and skills select committee inquiry into its employment practices.

CMOS direct time interval measurement of long-lived luminescence lifetimes.

Science.gov (United States)

Yao, Lei; Yung, Ka Yi; Cheung, Maurice C; Chodavarapu, Vamsy P; Bright, Frank V

2011-01-01

We describe a Complementary Metal-Oxide Semiconductor (CMOS) Direct Time Interval Measurement (DTIM) Integrated Circuit (IC) to detect the decay (fall) time of the luminescence emission when analyte-sensitive luminophores are excited with an optical pulse. The CMOS DTIM IC includes 14 × 14 phototransistor array, transimpedance amplifier, regulated gain amplifier, fall time detector, and time-to-digital convertor. We examined the DTIM system to measure the emission lifetime of oxygen-sensitive luminophores tris(4,7-diphenyl-1, 10-phenanthroline) ruthenium(II) ([Ru(dpp)(3)](2+)) encapsulated in sol-gel derived xerogel thin-films. The DTIM system fabricated using TSMC 0.35 μm process functions to detect lifetimes from 4 μs to 14.4 μs but can be tuned to detect longer lifetimes. The system provides 8-bit digital output proportional to lifetimes and consumes 4.5 mW of power with 3.3 V DC supply. The CMOS system provides a useful platform for the development of reliable, robust, and miniaturized optical chemical sensors.

A novel method to calculate the extent and amount of drug transported into CSF after intranasal administration.

Science.gov (United States)

Shi, Zhenqi; Zhang, Qizhi; Jiang, Xinguo

2005-01-31

The aim of this paper is to establish a novel method to calculate the extent and amount of drug transported to brain after administration. The cerebrospinal fluid (CSF) was chosen as the target region. The intranasal administration of meptazinol hydrochloride (MEP) was chosen as the model administration and intravenous administration was selected as reference. According to formula transform, the extent was measured by the equation of X(A)CSF, infinity/X0 = Cl(CSF) AUC(0-->infinity)CSF/X0 and the drug amount was calculated by multiplying the dose with the extent. The drug clearance in CSF (Cl(CSF)) was calculated by a method, in which a certain volume of MEP solution was injected directly into rat cistern magna and then clearance was assessed as the reciprocal of the zeroth moment of a CSF level-time curve normalized for dose. In order to testify the accurateness of the method, 14C-sucrose was chosen as reference because of its impermeable characteristic across blood-brain barrier (BBB). It was found out that the MEP concentrations in plasma and CSF after intranasal administration did not show significant difference with those after intravenous administration. However, the extent and amount of MEP transported to CSF was significantly lower compared with those to plasma after these two administrations. In conclusion, the method can be applied to measure the extent and amount of drug transported to CSF, which would be useful to evaluate brain-targeting drug delivery.

Asymptotic analysis of blood flow in stented arteries: time dependency and direct simulations***

Directory of Open Access Journals (Sweden)

Pichon Gostaf Kirill

2010-12-01

Full Text Available This work aims to extend in two distinct directions results recently obtained in [10]. In a first step we focus on the possible extension of our results to the time dependent case. Whereas in the second part some preliminary numerical simulations aim to give orders of magnitudes in terms of numerical costs of direct 3D simulations. We consider, in the first part, the time dependent rough problem for a simplified heat equation in a straight channel that mimics the axial velocity under an oscillating pressure gradient. We derive first order approximations with respect to ϵ, the size of the roughness. In order to understand the problem and set up correct boundary layer approximations, we perform a time periodic fourier analysis and check that no frequency can interact with the roughness. We show rigorously on this toy problem that the boundary layers remain stationary in time (independent on the frequency number. Finally we perform numerical tests validating our theoretical approach. In the second part, we determine actual limits, when running three-dimensional blood flow simulations of the non-homogenized stented arteries. We solve the stationary Stokes equations for an artery containing a saccular aneurysm. Consecutive levels of uniform mesh refinement, serve to relate spatial resolution, problem scale, and required computation time. Test computations are presented for femoral side aneurysm, where a simplified ten-wire stent model was placed across the aneurysm throat. We advocate the proposed stent homogenization model, by concluding that an actual computation power is not sufficient to run accurate, direct simulations of a pulsatile flow in stented vessels.

Limits to preference and the sensitivity of choice to rate and amount of food.

Science.gov (United States)

Aparicio, Carlos F; Baum, William M; Hughes, Christine E; Pitts, Raymond C

2016-03-01

Studies of choice holding food-amount ratio constant while varying food-rate ratio within sessions showed that local changes in preference depend on relative amount of food. The present study investigated whether sensitivity of choice to food-rate ratio and sensitivity to food-amount ratio are independent of one another when food-rate ratios are varied across sessions and food-amount ratios are varied within sessions. Food deliveries for rats' presses on the left and right levers were scheduled according to three different food-rate ratios of 1:1, 9:1, and 1:9; each food-rate ratio lasted for 106 sessions and was arranged independently of seven food-amount ratios (7:1, 6:2, 5:3, 4:4, 3:5, 2:6, and 1:7 food pellets) occurring within sessions in random sequence. Each amount ratio lasted for 10 food deliveries and was separated from another by a 60-s blackout. Sensitivity to rate ratio was high (1.0) across food deliveries. Sensitivity to amount ratio was low when food rates were equal across alternatives, but was high when rate ratio and amount ratio opposed one another. When rate ratio and amount ratio went in the same direction, choice ratio reached an elevenfold limit which reduced sensitivity to approximately zero. We conclude that three factors affect sensitivity to amount: (1) the limit to preference, (2) the equal effect on preference of amounts greater than four pellets, and (3) the absence of differential effects of switches in amount in the equal-rates (1:1) condition. Taken together, these findings indicate that rate and amount only sometimes combine independently as additive variables to determine preference when amount ratios vary frequently within sessions. © 2016 Society for the Experimental Analysis of Behavior.

Contrast enhancement technique in brain 3D-CTA studies. Optimizing the amount of contrast medium according to scan time based on TDC

International Nuclear Information System (INIS)

Terasawa, Kazuaki; Hatcho, Atsushi

2008-01-01

In three-dimensional CT angiography (3D-CTA), good reproducibility can be obtained by maintaining the maximum CT numbers (HU) at a specified level. However, the correlation between the scan time and the injection time showed that the maximum CT numbers increased and varied due to the additional contrast enhancement effect from recirculation of the injected contrast medium for longer injection times when the dose of iodinated contrast medium per unit time (mgI/s) was maintained at a specified level based on the time-density curve (TDC) of the phantom. The amount of contrast medium employed at our hospital has been optimized based on an iodinated contrast medium dose per unit time providing a contrast enhancement effect of 300 HU in the middle cerebral artery. Using this standard, a TDC phantom was employed to obtain an iodinated contrast medium dose per unit time, permitting equivalent maximum CT values (used as standard values) to be obtained by changing the injection time. A contrast-enhancement technique that accounts for the variation in the scan time was evaluated. Strong correlations were observed between the scan time and the injection time (R 2 =0.969) and between the injection time and the dose of iodinated contrast medium per unit body weight (R 2 =0.994). We conclude that adjusting the dose of iodinated contrast medium per unit body weight per unit time according to the scan time permits optimization of the contrast-enhancement technique. (author)

Quantum and classical strong direct product theorems and optimal time-space tradeoffs

NARCIS (Netherlands)

H. Klauck (Hartmut); R. Spalek (Robert); R. M. de Wolf (Ronald)

2007-01-01

textabstractA strong direct product theorem says that if we want to compute $k$ independent instances of a function, using less than $k$ times the resources needed for one instance, then our overall success probability will be exponentially small in $k$. We establish such theorems for the

Direct modulation of aberrant brain network connectivity through real-time NeuroFeedback.

Science.gov (United States)

Ramot, Michal; Kimmich, Sara; Gonzalez-Castillo, Javier; Roopchansingh, Vinai; Popal, Haroon; White, Emily; Gotts, Stephen J; Martin, Alex

2017-09-16

The existence of abnormal connectivity patterns between resting state networks in neuropsychiatric disorders, including Autism Spectrum Disorder (ASD), has been well established. Traditional treatment methods in ASD are limited, and do not address the aberrant network structure. Using real-time fMRI neurofeedback, we directly trained three brain nodes in participants with ASD, in which the aberrant connectivity has been shown to correlate with symptom severity. Desired network connectivity patterns were reinforced in real-time, without participants' awareness of the training taking place. This training regimen produced large, significant long-term changes in correlations at the network level, and whole brain analysis revealed that the greatest changes were focused on the areas being trained. These changes were not found in the control group. Moreover, changes in ASD resting state connectivity following the training were correlated to changes in behavior, suggesting that neurofeedback can be used to directly alter complex, clinically relevant network connectivity patterns.

Direct modulation of aberrant brain network connectivity through real-time NeuroFeedback

Science.gov (United States)

Kimmich, Sara; Gonzalez-Castillo, Javier; Roopchansingh, Vinai; Popal, Haroon; White, Emily; Gotts, Stephen J; Martin, Alex

2017-01-01

The existence of abnormal connectivity patterns between resting state networks in neuropsychiatric disorders, including Autism Spectrum Disorder (ASD), has been well established. Traditional treatment methods in ASD are limited, and do not address the aberrant network structure. Using real-time fMRI neurofeedback, we directly trained three brain nodes in participants with ASD, in which the aberrant connectivity has been shown to correlate with symptom severity. Desired network connectivity patterns were reinforced in real-time, without participants’ awareness of the training taking place. This training regimen produced large, significant long-term changes in correlations at the network level, and whole brain analysis revealed that the greatest changes were focused on the areas being trained. These changes were not found in the control group. Moreover, changes in ASD resting state connectivity following the training were correlated to changes in behavior, suggesting that neurofeedback can be used to directly alter complex, clinically relevant network connectivity patterns. PMID:28917059

48 CFR 1516.303-75 - Amount of cost-sharing.

Science.gov (United States)

2010-10-01

.... 1516.303-75 Section 1516.303-75 Federal Acquisition Regulations System ENVIRONMENTAL PROTECTION AGENCY CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Cost-Reimbursement Contracts 1516.303-75 Amount of... market share position; (3) The time and risk necessary to achieve success; (4) If the results of the...

Potentiometric determination of trace amounts of volatile thiols in natural gas

International Nuclear Information System (INIS)

Farroha, S.M.; Habboush, A.E.; Kurthab, S.Y.

1986-01-01

A potentiometric titration method was developed for the determination of volatile thiols in natural gas. An apparatus was devised for the quantitative absorption of volatile thiols. The measurements were performed in an ethanolic ammonium buffer solution containing a known amount of silver nitrate as supporting electrolyte. The excess silver was precipitated by a known amount of potassium iodide. The excess of iodide was back titrated potentiometrically with a standard solution of silver nitrate. The direct titration of the excess silver ions with a standard solution of potassium iodide gave a poor accuracy compared with the back titration method. Iodide selective electrode was employed as an indicator electrode and a silver-silver chloride electrode as reference electrode. The accuracy and reproducibility of the method were established by preparing several synthetic samples in which ethanthiol containing from 346.61 to 12.11 μUg mercaptan sulfur was taken as standard nitrogen as carrier gas with an optimum flow rate of 31.5 L/hr. The results obtained expressed in the form of Grans plot showed an error ranging from 0.16 to 2.39% by weight and the relative standard deviation did not exceed 2.20%. The amount of mercaptan sulfur determined in Iraqi natural gas taken directly in a cylinder from Dora refinery, Baghdad, Iraq, and after six months of storage we 23.15 Ug/L and 21.25 Ug/L respectively with a relative standard deviation not exceeded 1%. The interferences of hydrogen sulfide could be eliminated by absorption in cadimium acetate containing solution. Other sulfur containing compounds e.g. disulfides, sulfoxides which may be present in natural gas do not interfere with the analysis

Tactile pavement for guiding walking direction: An assessment of heading direction and gait stability.

Science.gov (United States)

Pluijter, Nanda; de Wit, Lieke P W; Bruijn, Sjoerd M; Plaisier, Myrthe A

2015-10-01

For maintaining heading direction while walking we heavily rely on vision. Therefore, walking in the absence of vision or with visual attention directed elsewhere potentially leads to dangerous situations. Here we investigated whether tactile information from the feet can be used as a (partial) substitute for vision in maintaining a stable heading direction. If so, participants should be better able to keep a constant heading direction on tactile pavement that indicates directionality than on regular flat pavement. However, such a pavement may also be destabilizing. Thus we asked participants to walk straight ahead on regular pavement, and on tactile pavement (tiles with ridges along the walking direction) while varying the amount of vision. We assessed the effects of the type of pavement as well as the amount of vision on the variability of the heading direction as well as gait stability. Both of these measures were calculated from accelerations and angular velocities recorded from a smartphone attached to the participants trunk. Results showed that on tactile pavement participants had a less variations in their heading direction than on regular pavement. The drawback, however, was that the tactile pavement used in this study decreased gait stability. In sum, tactile pavement can be used as a partial substitute for vision in maintaining heading direction, but it can also decrease gait stability. Future work should focus on designing tactile pavement that does provided directional clues, but is less destabilizing. Copyright © 2015 Elsevier B.V. All rights reserved.

Performing T-tests to Compare Autocorrelated Time Series Data Collected from Direct-Reading Instruments.

Science.gov (United States)

O'Shaughnessy, Patrick; Cavanaugh, Joseph E

2015-01-01

Industrial hygienists now commonly use direct-reading instruments to evaluate hazards in the workplace. The stored values over time from these instruments constitute a time series of measurements that are often autocorrelated. Given the need to statistically compare two occupational scenarios using values from a direct-reading instrument, a t-test must consider measurement autocorrelation or the resulting test will have a largely inflated type-1 error probability (false rejection of the null hypothesis). A method is described for both the one-sample and two-sample cases which properly adjusts for autocorrelation. This method involves the computation of an "equivalent sample size" that effectively decreases the actual sample size when determining the standard error of the mean for the time series. An example is provided for the one-sample case, and an example is given where a two-sample t-test is conducted for two autocorrelated time series comprised of lognormally distributed measurements.

Direct Heat

Energy Technology Data Exchange (ETDEWEB)

Lienau, P J

1990-01-01

Potential resources and applications of earth heat in the form of geothermal energy are large. United States direct uses amount to 2,100 MWt thermal and worldwide 8,850 MWt above a reference temperature of 35 degrees Celsius. Space and district heating are the major direct uses of geothermal energy. Equipment employed in direct use projects is of standard manufacture and includes downhole and circulation pumps, transmission and distribution pipelines, heat exchangers and convectors, heat pumps and chillers. Direct uses of earth heat discussed are space and district heating, greenhouse heating and fish farming, process and industrial applications. The economic feasibility of direct use projects is governed by site specific factors such as location of user and resource, resource quality, system load factor and load density, as well as financing. Examples are presented of district heating in Klamath Falls, and Elko. Further developments of direct uses of geothermal energy will depend on matching user needs to the resource, and improving load factors and load density.

Microbial Biodiesel Production by Direct Transesterification of Rhodotorula glutinis Biomass

Directory of Open Access Journals (Sweden)

I-Ching Kuan

2018-04-01

Full Text Available (1 Background: Lipids derived from oleaginous microbes have become promising alternative feedstocks for biodiesel. This is mainly because the lipid production rate from microbes is one to two orders of magnitude higher than those of energy crops. However, the conventional process for converting these lipids to biodiesel still requires a large amount of energy and organic solvents; (2 Methods: In this study, an oleaginous yeast, Rhodotorula glutinis, was used for direct transesterification without lipid pre-extraction to produce biodiesel, using sulfuric acid or sodium hydroxide as a catalyst. Such processes decreased the amount of energy and organic solvents required simultaneously; (3 Results: When 1 g of dry R. glutinis biomass was subject to direct transesterification in 20 mL of methanol catalyzed by 0.6 M H2SO4 at 70 °C for 20 h, the fatty acid methyl ester (FAME yield reached 111%. Using the same amount of biomass and methanol loading but catalyzed by 1 g/L NaOH at 70 °C for 10 h, the FAME yield reached 102%. The acid-catalyzed process showed a superior moisture tolerance; when the biomass contained 70% moisture, the FAME yield was 43% as opposed to 34% of the base-catalyzed counterpart; (4 Conclusions: Compared to conventional transesterification, which requires lipid pre-extraction, direct transesterification not only simplifies the process and shortens the reaction time, but also improves the FAME yield.

46 CFR 308.403 - Insured amounts.

Science.gov (United States)

2010-10-01

... total amount of war risk insurance obtainable from companies authorized to do an insurance business in a... MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE War Risk Builder's Risk Insurance § 308.403 Insured amounts. (a) Prelaunching period. The amount insured during...

Explaining the amount of care needed by hospitalised surgical patients: a prospective time and motion study

NARCIS (Netherlands)

van Oostveen, Catharina J.; Vermeulen, Hester; Gouma, Dirk J.; Bakker, Piet J.; Ubbink, Dirk T.

2013-01-01

Hospitals provide care for patients with a variety of diseases, co-morbidities and complications. The actual amount of care these patients need is unclear. Given the recent developments such as ageing, multi-morbidity and budgetary restraints, a practical explanatory model would avail healthcare

Effects of direct injection timing and blending ratio on RCCI combustion with different low reactivity fuels

International Nuclear Information System (INIS)

Benajes, Jesús; Molina, Santiago; García, Antonio; Monsalve-Serrano, Javier

2015-01-01

Highlights: • E85 requires notable lower premixed energy ratios to achieve a stable combustion. • E10-95 leads to shorter and advanced combustion with higher maximum RoHR peaks. • E20-95, E10-98 and E10-95 reach EURO VI NOx and soot levels for all the engine loads. • E10-95 allows a significant reduction in HC and CO emissions. - Abstract: This work investigates the effects of the direct injection timing and blending ratio on RCCI performance and engine-out emissions at different engine loads using four low reactivity fuels: E10-95, E10-98, E20-95 and E85 (port fuel injected) and keeping constant the same high reactivity fuel: diesel B7 (direct injected). The experiments were conducted using a heavy-duty single-cylinder research diesel engine adapted for dual-fuel operation. All the tests were carried out at 1200 rpm. To assess the blending ratio effect, the total energy delivered to the cylinder coming from the low reactivity fuel was kept constant for the different fuel blends investigated by adjusting the low reactivity fuel mass as required in each case. In addition, a detailed analysis of the air/fuel mixing process has been developed by means of a 1-D in-house developed spray model. Results suggest that notable higher diesel amount is required to achieve a stable combustion using E85. This fact leads to higher NOx levels and unacceptable ringing intensity. By contrast, EURO VI NOx and soot levels are fulfilled with E20-95, E10-98 and E10-95. Finally, the higher reactivity of E10-95 results in a significant reduction in CO and HC emissions, mainly at low load

Access to gram scale amounts of functional globular adiponectin from E. coli inclusion bodies by alkaline-shock solubilization.

Science.gov (United States)

Heiker, John T; Klöting, Nora; Blüher, Matthias; Beck-Sickinger, Annette G

2010-07-16

The adipose tissue derived protein adiponectin exerts anti-diabetic, anti-inflammatory and anti-atherosclerotic effects. Adiponectin serum concentrations are in the microgram per milliliter range in healthy humans and inversely correlate with obesity and metabolic disorders. Accordingly, raising circulating adiponectin levels by direct administration may be an intriguing strategy in the treatment of obesity-related metabolic disorders. However production of large amounts of recombinant adiponectin protein is a primary obstacle so far. Here, we report a novel method for large amount production of globular adiponectin from E. coli inclusion bodies utilizing an alkaline-shock solubilization method without chaotropic agents followed by precipitation of the readily renaturing protein. Precipitation of the mildly solubilized protein capitalizes on advantages of inclusion body formation. This approach of inclusion body protein recovery provides access to gram scale amounts of globular adiponectin with standard laboratory equipment avoiding vast dilution or dialysis steps to neutralize the pH and renature the protein, thus saving chemicals and time. The precipitated protein is readily renaturing in buffer, is of adequate purity without a chromatography step and shows biological activity in cultured MCF7 cells and significantly lowered blood glucose levels in mice with streptozotocin induced type 1 diabetes. Copyright 2010 Elsevier Inc. All rights reserved.

31 CFR 235.5 - Reclamation amounts.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false Reclamation amounts. 235.5 Section 235.5 Money and Finance: Treasury Regulations Relating to Money and Finance (Continued) FISCAL SERVICE... ON DESIGNATED DEPOSITARIES § 235.5 Reclamation amounts. Amounts received by way of reclamation on...

13 CFR 400.202 - Loan amount.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Loan amount. 400.202 Section 400.202 Business Credit and Assistance EMERGENCY STEEL GUARANTEE LOAN BOARD EMERGENCY STEEL GUARANTEE LOAN PROGRAM Steel Guarantee Loans § 400.202 Loan amount. (a) The aggregate amount of loan principal guaranteed...

Pollutant forecasting error based on persistence of wind direction

International Nuclear Information System (INIS)

Cooper, R.E.

1978-01-01

The purpose of this report is to provide a means of estimating the reliability of forecasts of downwind pollutant concentrations from atmospheric puff releases. These forecasts are based on assuming the persistence of wind direction as determined at the time of release. This initial forecast will be used to deploy survey teams, to predict population centers that may be affected, and to estimate the amount of time available for emergency response. Reliability of forecasting is evaluated by developing a cumulative probability distribution of error as a function of lapsed time following an assumed release. The cumulative error is determined by comparing the forecast pollutant concentration with the concentration measured by sampling along the real-time meteorological trajectory. It may be concluded that the assumption of meteorological persistence for emergency response is not very good for periods longer than 3 hours. Even within this period, the possibiity for large error exists due to wind direction shifts. These shifts could affect population areas totally different from those areas first indicated

13 CFR 500.202 - Loan amount.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Loan amount. 500.202 Section 500.202 Business Credit and Assistance EMERGENCY OIL AND GAS GUARANTEED LOAN BOARD EMERGENCY OIL AND GAS GUARANTEED LOAN PROGRAM Oil and Gas Guaranteed Loans § 500.202 Loan amount. The aggregate amount of loan...

Time to audit.

Science.gov (United States)

Smyth, L G; Martin, Z; Hall, B; Collins, D; Mealy, K

2012-09-01

Public and political pressures are increasing on doctors and in particular surgeons to demonstrate competence assurance. While surgical audit is an integral part of surgical practice, its implementation and delivery at a national level in Ireland is poorly developed. Limits to successful audit systems relate to lack of funding and administrative support. In Wexford General Hospital, we have a comprehensive audit system which is based on the Lothian Surgical Audit system. We wished to analyse the amount of time required by the Consultant, NCHDs and clerical staff on one surgical team to run a successful audit system. Data were collected over a calendar month. This included time spent coding and typing endoscopy procedures, coding and typing operative procedures, and typing and signing discharge letters. The total amount of time spent to run the audit system for one Consultant surgeon for one calendar month was 5,168 min or 86.1 h. Greater than 50% of this time related to work performed by administrative staff. Only the intern and administrative staff spent more than 5% of their working week attending to work related to the audit. An integrated comprehensive audit system requires a very little time input by Consultant surgeons. Greater than 90% of the workload in running the audit was performed by the junior house doctors and administrative staff. The main financial implications for national audit implementation would relate to software and administrative staff recruitment. Implementation of the European Working Time Directive in Ireland may limit the time available for NCHD's to participate in clinical audit.

Carbon-Nitrogen Relationships during the Humification of Cellulose in Soils Containing Different Amounts of Clay

DEFF Research Database (Denmark)

Sørensen, Lasse Holst

1981-01-01

the 2 soils with the high content of clay had a relatively high content of available unlabeled soil-N which was used for synthesis of metabolic material. The proportionate retention of labeled C for a given soil was largely independent of the size of the amendments, whereas the proportionate amount....... Some of the labeled organic N when mineralized was re-incorporated into organic compounds containing increasing proportions of native soil-C, whereas labeled C when mineralized as CO2 disappeared from the soils. The amount of labeled amino acid-C, formed during decomposition of the labeled cellulose...... was most intense, and it held throughout the 4 yr of the incubation; proportionally it was independent of the amount of cellulose added and the temperature. The labeled amino acid-N content was not directly related to the amount of clay in the soil, presumably because more unlabeled soil-N was available...

A rapid and direct real time PCR-based method for identification of Salmonella spp

DEFF Research Database (Denmark)

Rodriguez-Lazaro, D.; Hernández, Marta; Esteve, T.

2003-01-01

The aim of this work was the validation of a rapid, real-time PCR assay based on TaqMan((R)) technology for the unequivocal identification of Salmonella spp. to be used directly on an agar-grown colony. A real-time PCR system targeting at the Salmonella spp. invA gene was optimized and validated ...

45 CFR 32.8 - Amounts withheld.

Science.gov (United States)

2010-10-01

...) of this section, or (ii) An amount equal to 25% of the debtor's disposable pay less the amount(s... first pay day after the employer receives the order. However, if the first pay day is within 10 days after receipt of the order, the employer may begin deductions on the second pay day. (k) An employer may...

Elementary teachers' ideas about, planning for and implementation of learner-directed and teacher-directed inquiry: A mixed methods study

Science.gov (United States)

Biggers, Mandy Sue

Using a framework for variations of classroom inquiry (National Research Council [NRC], 2000, p. 29), this study explored 40 inservice elementary teachers' planning, modification, and enactment of kit-based science curriculum materials. As part of the study, a new observation protocol was modified from an existing protocol (Practices of Science Observation Protocol [P-SOP]) to measure the amount of teacher direction in science inquiry lessons (Practices of Science Observation Protocol + Directedness [P-SOPd]). An embedded mixed methods design was employed to investigate four questions: 1. How valid and reliable is the P-SOPd? 2. In what ways do inservice elementary teachers adapt existing elementary science curriculum materials across the inquiry continuum? 3. What is the relationship between the overall quality of inquiry and variations of inquiry in elementary teachers' enacted science instruction? 4. How do inservice elementary teachers' ideas about the inquiry continuum influence their adaptation of elementary science curriculum materials? Each teacher chose three lessons from a science unit for video-recorded observation, and submitted lesson plans for the three lessons. Lesson plans and videos were scored using the P-SOPd. The scores were also compared between the two protocols to determine if a correlation existed between the level of inquiry (measured on the P-SOP) and the amount of teacher direction (measured on the P-SOPd). Findings indicated no significant differences between planned and enacted lessons for the amount of teacher direction, but a correlation existed between the level of inquiry and the amount of teacher direction. In effect, the elementary teachers taught their science curriculum materials with a high level of fidelity for both the features of inquiry and the amount of teacher direction. A smaller group of three case study teachers were followed for the school year to give a more in-depth explanation of the quantitative findings. Case

42 CFR 57.1508 - Amount of interest subsidy payments; limitations.

Science.gov (United States)

2010-10-01

... GRANTS GRANTS FOR CONSTRUCTION OF TEACHING FACILITIES, EDUCATIONAL IMPROVEMENTS, SCHOLARSHIPS AND STUDENT LOANS Loan Guarantees and Interest Subsidies to Assist in Construction of Teaching Facilities for Health Profession Personnel § 57.1508 Amount of interest subsidy payments; limitations. The length of time for which...

DEFERRED TAXES GENERATED BY THE CAPITALIZED INTERESTS IN THE AMOUNT

Directory of Open Access Journals (Sweden)

PALIU – POPA LUCIA

2015-08-01

Full Text Available According to the General Framework for preparing and presenting the financial statements elaborated by IASB, the utility of information is provided by attributes (qualitative features, such as: intelligibility, relevance, credibility and comparability. For being credible, the financial information shall be erroneous, shall not be biased or deforming the patrimony, and one of the elements representing and defining the information credibility is the prudency. Thus, the prudential accounting treatments affect, on the one hand, the accounting information relevance and credibility, and on the other hand, equally, both the producers as well as the users of the financial information, due to the economic consequences which are generated. From this perspective and considering that the implied economic agents are not neutral in terms of their option concerning the neutral accounting practices, prudent or aggressive, we opined that it is useful to conduct a study aiming the relevance of the accounting information related to the deferred taxes generated by the capitalized interests in the amount of the fix assets, recognizing the value of these taxes having as result the compliance with the principle of prudency within the accountancy. In this context, compared to the dominant accounting systems, respectively the continental system and the Anglo- Saxon system, within which the accounting information is characterized as legal, respectively addressed to the external users, especially to the investors, the conducted study aimed the following directions: the main differences between the provisions of the national, European, Anglo-Saxon accounting regulations and those of the international referential related to the prudency; the occurrence and evolution of the deferred taxes generated by the capitalized interests in the amount of the fix assets; informational benefits of the accounting prudency concerning the reflection of the deferred taxes established by the

Influence of Short-time Oxidation on Corrosion Properties of Directionally Solidified Superalloys with Different Orientations

Directory of Open Access Journals (Sweden)

MA Luo-ning

2016-07-01

Full Text Available In order to investigate the corrosion performance on intersecting and longitudinal surfaces of unoxidized and oxidized directionally solidified superalloys, Ni-base directionally solidified superalloy DZ125 and Co-base directionally solidified superalloy DZ40M were selected. Oxidation behavior on both alloys with different orientations was investigated at 1050℃ at different times, simulating the oxidation process of vanes or blades in service; subsequent electrochemical performance in 3.5%NaCl aqueous solution was studied on two orientations of unoxidized and oxidized alloys, simulating the corrosion process of superalloy during downtime. The results show that grain boundaries and sub-boundaries of directionally solidified superalloys are susceptible to corrosion and thus longitudinal surface with lower area fraction of grain boundaries has higher corrosion resistance. Compared to intersecting surface of alloys, the structure of grain boundaries of longitudinal surface is less conducive to diffusion and thus the oxidation rate on longitudinal surface is lower. Formation of oxide layers on alloys after short-time oxidation provides protective effect and enhances the corrosion resistance.

Effects of amount and timing of nitrogen application and weed density on wild mustard (Sinapis arvensis seed production in winter wheat

Directory of Open Access Journals (Sweden)

mehdi rastgoo

2009-06-01

Full Text Available In order to study the effects of amount and timing of nitrogen application and weed density on wild mustard (Sinapis arvensis seed production in winter wheat, an experiment was conducted in 2001 at Research station of college of agriculture, Ferdowsi University of Mashhad. A Split plot design with three replications were used with factorial combination of weed density (0, 8, 16, and 32 plant/m2 and nitrogen (low=100, optimum= 150, and high= 225 Kg/ha as main plots.The sub plot factor included nitrogen splitting pattern (P1=1/3 at planting time+2/3 at tillering, P2= 1/3 at planting time + 1/3 at tillering + 1/3 at shooting. According to the results, wild mustard seed production increased with increasing wild mustard density and nitrogen rates, due to high wild mustard biomass production. Seed production of wild mustard was 161, 311, and 488 million/ha in low, optimum and high nitrogen rates, respectively. In the other hand, density and nitrogen rates had a significant effect on wild mustard fecundity. However, nitrogen splitting pattern showed no significant effect on wild mustard seed production.

DIRECTIONS OF USING DIRECT PAYMENTS BY THE INDIVIDUAL FARMS LOCATED IN CHOSEN REGIONS

Directory of Open Access Journals (Sweden)

Arkadiusz Sadowski

2012-01-01

Full Text Available This paper assesses the diversity of directions for use of direct payments in different types of individual farms. The questionnaire surveys were performed on 295 farms located in dif-ferent parts of the country. Analysed farms were divided into groups according to the amount direct support received. Based on the survey concluded that in all analysed groups the largest share of direct payments is spent on the purchase of means of production. The smallest farms also spend to a high extent, the money on household purposes (20.5% and the largest ones to finance the investment (17.7%.

Time well spent? Assessing nursing-supply chain activities.

Science.gov (United States)

Ferenc, Jeff

2010-02-01

The amount of time nurses spend providing direct patient care seems to be continually eroding. So it's little wonder a survey conducted last year of critical care, OR nurses and nurse executives found that half of the 1600 respondents feel they spend too much time on supply chain duties. Most also said their supply chain duties impact patient safe ty and their ability to provide bedside care. Experts interviewed for this report believe it's time for supply chain leaders and nurses to develop a closer working partnership. Included are their recommendations to improve performance.

Steam stable mesoporous silica MCM-41 stabilized by trace amounts of Al.

Science.gov (United States)

Tompkins, Jordan T; Mokaya, Robert

2014-02-12

Evaluation of low and ultralow Al content (Si/Al between 50 and 412) aluminosilicate Al-MCM-41 materials synthesized via three contrasting alumination routes, namely, direct mixed-gel synthesis, post-synthesis wet grafting, and post-synthesis dry grafting, indicates that trace amounts of Al introduced via dry grafting can stabilize mesoporous silica MCM-41 to steaming at 900 °C for 4 h. It was found that trace amounts of Al (Si/Al > 400) introduced via so-called dry grafting of Al stabilize the virtually purely siliceous MCM-41 to steaming, whereas Al incorporated via other methods that involve aqueous media such as direct mixed gel synthesis or wet grafting of Al offer only limited protection at low Al content. It is particularly remarkable that a post-synthesis dry grafted Al-MCM-41 material possessing trace amounts of Al (i.e., Si/Al ratio of 412) and surface area and pore volume of 1112 m(2)/g and 1.20 cm(3)/g, respectively, retains 90% (998 m(2)/g) of the surface area and 85% (1.03 cm(3)/g) of the pore volume after exposure to steaming at 900 °C for 4 h. Under similar steam treatment conditions, the mesostructure of pure silica Si-MCM-41 is virtually destroyed and undergoes a 93% reduction in surface area (958 m(2)/g to 69 m(2)/g) and 88% decrease in pore volume (0.97 cm(3)/g to 0.12 cm(3)/g). The steam stable ultralow (i.e., trace) Al containing MCM-41 materials is found to be virtually similar to mesoporous pure silica Si-MCM-41 with hardly any detectable acidity. The improvement in steam stability arises from not only the presence of trace amounts of Al, but also from an apparent increase in the level of silica condensation that is specific to dry grafted alluminosilicate MCM-41 materials. The more highly condensed framework has fewer silanol groups and therefore is more resistant to hydrolysis under steaming conditions.

Return period curves for extreme 5-min rainfall amounts at the Barcelona urban network

Science.gov (United States)

Lana, X.; Casas-Castillo, M. C.; Serra, C.; Rodríguez-Solà, R.; Redaño, A.; Burgueño, A.; Martínez, M. D.

2018-03-01

Heavy rainfall episodes are relatively common in the conurbation of Barcelona and neighbouring cities (NE Spain), usually due to storms generated by convective phenomena in summer and eastern and south-eastern advections in autumn. Prevention of local flood episodes and right design of urban drainage have to take into account the rainfall intensity spread instead of a simple evaluation of daily rainfall amounts. The database comes from 5-min rain amounts recorded by tipping buckets in the Barcelona urban network along the years 1994-2009. From these data, extreme 5-min rain amounts are selected applying the peaks-over-threshold method for thresholds derived from both 95% percentile and the mean excess plot. The return period curves are derived from their statistical distribution for every gauge, describing with detail expected extreme 5-min rain amounts across the urban network. These curves are compared with those derived from annual extreme time series. In this way, areas in Barcelona submitted to different levels of flood risk from the point of view of rainfall intensity are detected. Additionally, global time trends on extreme 5-min rain amounts are quantified for the whole network and found as not statistically significant.

45 CFR 149.100 - Amount of reimbursement.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Amount of reimbursement. 149.100 Section 149.100... REQUIREMENTS FOR THE EARLY RETIREE REINSURANCE PROGRAM Reinsurance Amounts § 149.100 Amount of reimbursement... reimbursement in the amount of 80 percent of the costs for health benefits (net of negotiated price concessions...

The Effect of the Rolling Direction, Temperature, and Etching Time on the Photochemical Machining of Monel 400 Microchannels

Directory of Open Access Journals (Sweden)

Deepakkumar H. Patil

2016-01-01

Full Text Available The present paper describes the effect of the rolling direction on the quality of microchannels manufactured using photochemical machining (PCM of Monel 400. Experiments were carried out to fabricate microchannels along and across the rolling direction to investigate the effect of the grain orientation on microchannel etching. The input parameters considered were channel width and rolling direction, whereas the depth of etch was the response parameters. Different channels of widths of 60, 100, 150, 200, and 250 μm were etched. The effects of the etching time and temperature of the etchant solution on the undercut and depth of the microchannels were studied. For good quality microchannels, the effects of spinning time, spinning speed, exposure time, and photoresist film strength were also taken into consideration. Optimized values of the above were used for the experimentation. The results show that the depth of etch of the microchannel increases more along the rolling direction than across the rolling direction. The channel width and depth are significantly affected by the etching time and temperature. The proposed study reports an improvement in the quality of microchannels produced using PCM.

The Amount of Time to Eat Lunch is Associated with Children’s Selection and Consumption of School Meal Entrée, Fruits, Vegetable, and Milk

Science.gov (United States)

Cohen, Juliana F.W.; Jahn, Jaquelyn L.; Richardson, Scott; Cluggish, Sarah A.; Parker, Ellen; Rimm, Eric B.

2015-01-01

Background There are currently no national standards for school lunch period lengths and little is known about the association between the amount of time students have to eat and school food selection and consumption. Objectives To examine plate waste measurements from students in the control arm from the MEALS study (2011-2012 school year) for the association of the amount of time to eat with school meal selection and consumption. Design Prospective study using up to six repeated measures among students over the school year. Participants/Setting 1001 students in grades 3-8 attending 6 participating elementary/middle schools in an urban, low-income school district where lunch period lengths varied from 20-30 minutes. Main Outcome Measures School food selection and consumption were collected using plate waste methodology. Statistical Analyses Performed Logistic regression and mixed-model ANOVA was used to examine food selection and consumption. Results Compared with meal component selection when students had at least 25 minutes to eat, students were significantly less likely to select a fruit (44% vs. 57%; p=0.0001) compared with when students had fewer than 20 minutes to eat. There were no significant differences in entrée, milk, or vegetable selection. Among those who selected a meal component, students with fewer than 20 minutes to eat consumed 13% less of their entrée (peat. Conclusions Over the school year, a substantial number of students had insufficient time to eat, which was associated with significantly decreased entrée, milk, and vegetable consumption compared with students who had more time to eat. School policies that encourage lunches with at least 25 minutes of seated time may reduce food waste and improve dietary intake. PMID:26372337

The suprachiasmatic nucleus regulates sleep timing and amount in mice

NARCIS (Netherlands)

Easton, Amy; Meerlo, Peter; Bergmann, Bernard; Turek, Fred W.

2004-01-01

Context: Sleep is regulated by circadian and homeostatic processes. The circadian pacemaker, located in the suprachiasmatic nuclei (SCN), regulates the timing and consolidation of the sleep-wake cycle, while a homeostatic mechanism governs the accumulation of sleep debt and sleep, recovery. Recent

The Anesthesia Preoperative Evaluation Clinic (APEC): a prospective randomized controlled trial assessing impact on consultation time, direct costs, patient education and satisfaction with anesthesia care.

Science.gov (United States)

Schiff, J H; Frankenhauser, S; Pritsch, M; Fornaschon, S A; Snyder-Ramos, S A; Heal, C; Schmidt, K; Martin, E; Böttiger, B W; Motsch, J

2010-07-01

Anesthetic preoperative evaluation clinics (APECs) are relatively new institutions. Although cost effective, APECs have not been universally adopted in Europe. The aim of this study was to compare preoperative anesthetic assessment in wards with an APEC, assessing time, information gain, patient satisfaction and secondary costs. Two hundred and seven inpatients were randomized to be assessed at the APEC or on the ward by the same two senior anesthetists. The outcomes measured were the length of time for each consultation, the amount of information passed on to patients and the level of patient satisfaction. The consultation time was used to calculate impact on direct costs. A multivariate analysis was conducted to detect confounding variables. Ninety-four patients were seen in the APEC, and 78 were seen on the ward. The total time for the consultation was shorter for the APEC (mean 8.4 minutes [Plocation of the consultation. Gain in information was significantly influenced by age, education and the location of the visit. The APEC reduced consultation times and costs and had a positive impact on patient education. The cost savings are related to personnel costs and, therefore, are independent of other potential savings of an APEC, whereas global patient satisfaction remains unaltered.

Association between Activated Partial Thromboplastin Time and the Amount of Infused Heparin at Bone Marrow Transplantation.

Science.gov (United States)

Kusuda, Machiko; Kimura, Shun-Ichi; Misaki, Yukiko; Yoshimura, Kazuki; Gomyo, Ayumi; Hayakawa, Jin; Tamaki, Masaharu; Akahoshi, Yu; Ugai, Tomotaka; Kameda, Kazuaki; Wada, Hidenori; Ishihara, Yuko; Kawamura, Koji; Sakamoto, Kana; Sato, Miki; Terasako-Saito, Kiriko; Kikuchi, Misato; Nakasone, Hideki; Kako, Shinichi; Tanihara, Aki; Kanda, Yoshinobu

2018-03-27

The actual heparin concentration of harvested allogeneic bone marrow varies among harvest centers. We monitor the activated partial thromboplastin time (APTT) of the patient during bone marrow infusion and administer prophylactic protamine according to the APTT. We retrospectively reviewed the charts of consecutive patients who underwent bone marrow transplantation without bone marrow processing at our center between April 2007 and March 2016 (n = 94). APTT was monitored during marrow transfusion in 52 patients. We analyzed the relationship between the APTT ratio and several parameters related to heparin administration. As a result, the weight-based heparin administration rate (U/kg/hour) seemed to be more closely related to the APTT ratio (r = .38, P = .005) than to the total amount of heparin. There was no significant correlation between the APTT ratio and renal or liver function. Bleeding complications during and early after infusion were seen in 3 of 52 patients, and included intracranial, nasal, and punctured-skin bleeding. The APTT ratio during transfusion was over 5.88 in the former 2 patients and 2.14 in the latter. All of these patients recovered without sequelae. In conclusion, slow bone marrow infusion is recommended to decrease the weight-based heparin administration rate when the heparin concentration per patient body weight is high. Copyright © 2018 The American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.

Saving time and energy with oversubscription and semi-direct Møller-Plesset second order perturbation methods.

Science.gov (United States)

Fought, Ellie L; Sundriyal, Vaibhav; Sosonkina, Masha; Windus, Theresa L

2017-04-30

In this work, the effect of oversubscription is evaluated, via calling 2n, 3n, or 4n processes for n physical cores, on semi-direct MP2 energy and gradient calculations and RI-MP2 energy calculations with the cc-pVTZ basis using NWChem. Results indicate that on both Intel and AMD platforms, oversubscription reduces total time to solution on average for semi-direct MP2 energy calculations by 25-45% and reduces total energy consumed by the CPU and DRAM on average by 10-15% on the Intel platform. Semi-direct gradient time to solution is shortened on average by 8-15% and energy consumption is decreased by 5-10%. Linear regression analysis shows a strong correlation between time to solution and total energy consumed. Oversubscribing during RI-MP2 calculations results in performance degradations of 30-50% at the 4n level. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

48 CFR 31.202 - Direct costs.

Science.gov (United States)

2010-10-01

... REQUIREMENTS CONTRACT COST PRINCIPLES AND PROCEDURES Contracts With Commercial Organizations 31.202 Direct... amount as an indirect cost if the accounting treatment— (1) Is consistently applied to all final cost... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Direct costs. 31.202...

Direct and inverse problems in dispersive time-of-flight photocurrent revisited

Science.gov (United States)

Sagues, Francesc; Sokolov, Igor M.

2017-10-01

Using the fact that the continuous time random walk (CTRW) scheme is a random process subordinated to a simple random walk under the operational time given by the number of steps taken by the walker up to a given time, we revisit the problem of strongly dispersive transport in disordered media, which first lead Scher and Montroll to introducing the power law waiting time distributions. Using a subordination approach permits to disentangle the complexity of the problem, separating the solution of the boundary value problem (which is solved on the level of normal diffusive transport) from the influence of the waiting times, which allows for the solution of the direct problem in the whole time domain (including short times, out of reach of the initial approach), and simplifying strongly the analysis of the inverse problem. This analysis shows that the current traces do not contain information sufficient for unique restoration of the waiting time probability densities, but define a single-parametric family of functions that can be restored, all leading to the same photocurrent forms. The members of the family have the power-law tails which differ only by a prefactor, but may look astonishingly different at their body. The same applies to the multiple trapping model, mathematically equivalent to a special limiting case of CTRW. Contribution to the Topical Issue "Continuous Time Random Walk Still Trendy: Fifty-year History, Current State and Outlook", edited by Ryszard Kutner and Jaume Masoliver.

Dependence of the amount of open magnetic flux on the direction of the interplanetary magnetic field

International Nuclear Information System (INIS)

Akasofu, S.I.; Ahn, B.H.

1980-01-01

The power generated by the solar wind-magnetosphere dynamo is proportional to the amount of the open magnetic flux phi. It is difficult to use this fact in determining observationally the dependence of phi on the orientation of the interplanetary magnetic field vector. It is shown that, for a simple vacuum superposition of the earth's dipole field and a uniform magnetic field, PHI is very closely proportional to sin(theta/2) for a wide range of the intensity of the uniform field, where theta denotes the polar angle of the interplanetary magnetic field vector in the Y-Z plane of solar-magnetospheric coordinates. (author)

Mapping geological structures in bedrock via large-scale direct current resistivity and time-domain induced polarization tomography

DEFF Research Database (Denmark)

Rossi, Matteo; Olsson, Per-Ivar; Johansson, Sara

2017-01-01

-current resistivity distribution of the subsoil and the phase of the complex conductivity using a constant-phase angle model. The joint interpretation of electrical resistivity and induced-polarization models leads to a better understanding of complex three-dimensional subsoil geometries. The results have been......An investigation of geological conditions is always a key point for planning infrastructure constructions. Bedrock surface and rock quality must be estimated carefully in the designing process of infrastructures. A large direct-current resistivity and time-domain induced-polarization survey has......, there are northwest-trending Permian dolerite dykes that are less deformed. Four 2D direct-current resistivity and time-domain induced-polarization profiles of about 1-km length have been carefully pre-processed to retrieve time-domain induced polarization responses and inverted to obtain the direct...

Biodiesel production by direct transesterification of microalgal biomass with co-solvent.

Science.gov (United States)

Zhang, Yan; Li, Ya; Zhang, Xu; Tan, Tianwei

2015-11-01

In this study, a direct transesterification process using 75% ethanol and co-solvent was studied to reduce the energy consumption of lipid extraction process and improve the conversion yield of the microalgae biodiesel. The addition of a certain amount of co-solvent (n-hexane is most preferable) was required for the direct transesterification of microalgae biomass. With the optimal reaction condition of n-hexane to 75% ethanol volume ratio 1:2, mixed solvent dosage 6.0mL, reaction temperature 90°C, reaction time 2.0h and catalyst volume 0.6mL, the direct transesterification process of microalgal biomass resulted in a high conversion yield up to 90.02±0.55wt.%. Copyright © 2015 Elsevier Ltd. All rights reserved.

Nonlinear techniques for forecasting solar activity directly from its time series

Science.gov (United States)

Ashrafi, S.; Roszman, L.; Cooley, J.

1993-01-01

This paper presents numerical techniques for constructing nonlinear predictive models to forecast solar flux directly from its time series. This approach makes it possible to extract dynamical in variants of our system without reference to any underlying solar physics. We consider the dynamical evolution of solar activity in a reconstructed phase space that captures the attractor (strange), give a procedure for constructing a predictor of future solar activity, and discuss extraction of dynamical invariants such as Lyapunov exponents and attractor dimension.

Real-time directional wave data collection

Digital Repository Service at National Institute of Oceanography (India)

AshokKumar, K.; Diwan, S.G.; Pednekar, P.S.

The wave measurements carried out along the east and west coasts off India at 13 locations using the directional waverider buoys are referred in this paper. The total number of buoy days are 4501 and out of which the data collected are 4218 days...

Preoperative management of surgical patients by "shortened fasting time": a study on the amount of total body water by multi-frequency impedance method.

Science.gov (United States)

Taniguchi, Hideki; Sasaki, Toshio; Fujita, Hisae

2012-01-01

Preoperative fasting is an established procedure to be practiced for patients before surgery, but optimal preoperative fasting time still remains controversial. The aim of this study was to investigate the effect of "shortened preoperative fasting time" on the change in the amount of total body water (TBW) in elective surgical patients. TBW was measured by multi-frequency impedance method. The patients, who were scheduled to undergo surgery for stomach cancer, were divided into two groups of 15 patients each. Before surgery, patients in the control group were managed with conventional preoperative fasting time, while patients in the "enhanced recovery after surgery (ERAS)" group were managed with "shortened preoperative fasting time" and "reduced laxative medication." TBW was measured on the day before surgery and the day of surgery before entering the operating room. Defecation times and anesthesia-related vomiting and aspiration were monitored. TBW values on the day of surgery showed changes in both groups as compared with those on the day before surgery, but the rate of change was smaller in the ERAS group than in the control group (2.4±6.8% [12 patients] vs. -10.6±4.6% [14 patients], pfasting time" and "reduced administration of laxatives" is effective in the maintenance of TBW in elective surgical patients.

Scalability of Direct Solver for Non-stationary Cahn-Hilliard Simulations with Linearized time Integration Scheme

KAUST Repository

Woźniak, M.

2016-06-02

We study the features of a new mixed integration scheme dedicated to solving the non-stationary variational problems. The scheme is composed of the FEM approximation with respect to the space variable coupled with a 3-leveled time integration scheme with a linearized right-hand side operator. It was applied in solving the Cahn-Hilliard parabolic equation with a nonlinear, fourth-order elliptic part. The second order of the approximation along the time variable was proven. Moreover, the good scalability of the software based on this scheme was confirmed during simulations. We verify the proposed time integration scheme by monitoring the Ginzburg-Landau free energy. The numerical simulations are performed by using a parallel multi-frontal direct solver executed over STAMPEDE Linux cluster. Its scalability was compared to the results of the three direct solvers, including MUMPS, SuperLU and PaSTiX.

7 CFR 1436.9 - Loan amount and loan application approvals.

Science.gov (United States)

2010-01-01

... approving authority to be ineligible for loan. (c) The maximum total principal amount of the farm storage... facility; (ii) By a yield determined reasonable by the county committee; (iii) Multiply by two (for 2 years... first time. (e) When a storage structure has a larger capacity than the applicant's needed capacity, as...

Get a Life? The Impact of the European Working Time Directive: The Case of UK Senior Doctors.

Science.gov (United States)

Dolton, Peter J; Kidd, Michael P; Fooken, Jonas

2015-10-01

This paper seeks to identify the effect of the implementation of the European Working Time Directive on the working hours of UK doctors. The Labour Force Survey is used to compare the working hours of doctors with a variety of control groups before and after the implementation of the directive. The controls include those unconstrained by the directive and doctor counterparts working in Europe. We use differences-in-differences and matching methods to estimate the impact of this natural experiment, distinguishing between the anticipation and enactment of the European Working Time Directive. We find that the legislation reduced the hours of senior doctors by around 8 hours in total including the component attributable to anticipation effects and allowing for (exogenously set) rising wages. Copyright © 2014 John Wiley & Sons, Ltd. Copyright © 2014 John Wiley & Sons, Ltd.

Direct oxide reducing method

International Nuclear Information System (INIS)

Tokiwai, Moriyasu.

1995-01-01

Calcium oxides and magnetic oxides as wastes generated upon direct reduction are subjected to molten salt electrolysis, and reduced metallic calcium and magnesium are separated and recovered. Then calcium and magnesium are used recyclically as the reducing agent upon conducting direct oxide reduction. Even calcium oxides and magnesium oxides, which have high melting points and difficult to be melted usually, can be melted in molten salts of mixed fluorides or chlorides by molten-salt electrolysis. Oxides are decomposed by electrolysis, and oxygen is removed in the form of carbon monoxide, while the reduced metallic calcium and magnesium rise above the molten salts on the side of a cathode, and then separated. Since only carbon monoxide is generated as radioactive wastes upon molten salt electrolysis, the amount of radioactive wastes can be greatly reduced, and the amount of the reducing agent used can also be decreased remarkably. (N.H.)

Direct analysis of radionuclides-96 samples simultaneously

International Nuclear Information System (INIS)

Kessler, M.J.

1991-01-01

Recently, there has been a tremendous interest in two areas of concern in nuclear counting and radioactivity waste disposal. The first is the reduction of radioactive waste, in particular the reduction in the amount of or the development of environmentally safe scintillation cocktails. The second is the development of a simple method of quantitating large numbers of samples (thousands/day) in a short period of time (minutes). These two areas of concern have been addressed with the development of the Matrix 96 direct beta counter. This new instrumental technique is capable of quantitating 96 samples simultaneously in the microplate format (8 x 12, 96 sample) on a solid support WITHOUT the use of any cocktails, vials, and is non-destructive to the sample. The use of this technique for the following biomedical applications, DNA dot blots, cell proliferation (3H thymidine), receptor binding, chromium cytotoxicity assays, and protein assays will be discussed in detail. The data from both the conventional beta and gamma counter will be correlated and compared to the new Matrix 96 direct beta counter. This new technique provides a convenient method of addressing the concerns of reducing radioactive waste and provides a method of quantitating a large number of samples, accurately in a short period of time (96 at a time)

Distributed Adaptive Finite-Time Approach for Formation-Containment Control of Networked Nonlinear Systems Under Directed Topology.

Science.gov (United States)

Wang, Yujuan; Song, Yongduan; Ren, Wei

2017-07-06

This paper presents a distributed adaptive finite-time control solution to the formation-containment problem for multiple networked systems with uncertain nonlinear dynamics and directed communication constraints. By integrating the special topology feature of the new constructed symmetrical matrix, the technical difficulty in finite-time formation-containment control arising from the asymmetrical Laplacian matrix under single-way directed communication is circumvented. Based upon fractional power feedback of the local error, an adaptive distributed control scheme is established to drive the leaders into the prespecified formation configuration in finite time. Meanwhile, a distributed adaptive control scheme, independent of the unavailable inputs of the leaders, is designed to keep the followers within a bounded distance from the moving leaders and then to make the followers enter the convex hull shaped by the formation of the leaders in finite time. The effectiveness of the proposed control scheme is confirmed by the simulation.

Amount of prenatal visual stimulation alters incubation times and postnatal preferences in leopard geckos (Eublepharis macularius).

Science.gov (United States)

Sleigh, M J; Birchard, G F

2001-09-01

The authors exposed gecko (Eublepharis macularius) embryos to patterned visual stimulation beginning at either 1 week or 2 weeks prior to hatching. Embryos exposed to the substantially augmented amount of prenatal visual stimulation hatched significantly earlier than the embryos either exposed to the moderately augmented prenatal visual stimulation or not exposed to any prenatal visual stimulation (p geckos in all conditions failed to exhibit a preference for either stimulus.

Directional Darwinian Selection in proteins.

Science.gov (United States)

McClellan, David A

2013-01-01

Molecular evolution is a very active field of research, with several complementary approaches, including dN/dS, HON90, MM01, and others. Each has documented strengths and weaknesses, and no one approach provides a clear picture of how natural selection works at the molecular level. The purpose of this work is to present a simple new method that uses quantitative amino acid properties to identify and characterize directional selection in proteins. Inferred amino acid replacements are viewed through the prism of a single physicochemical property to determine the amount and direction of change caused by each replacement. This allows the calculation of the probability that the mean change in the single property associated with the amino acid replacements is equal to zero (H0: μ = 0; i.e., no net change) using a simple two-tailed t-test. Example data from calanoid and cyclopoid copepod cytochrome oxidase subunit I sequence pairs are presented to demonstrate how directional selection may be linked to major shifts in adaptive zones, and that convergent evolution at the whole organism level may be the result of convergent protein adaptations. Rather than replace previous methods, this new method further complements existing methods to provide a holistic glimpse of how natural selection shapes protein structure and function over evolutionary time.

Effect of parameter calculation in direct estimation of the Lyapunov exponent in short time series

Directory of Open Access Journals (Sweden)

A. M. López Jiménez

2002-01-01

Full Text Available The literature about non-linear dynamics offers a few recommendations, which sometimes are divergent, about the criteria to be used in order to select the optimal calculus parameters in the estimation of Lyapunov exponents by direct methods. These few recommendations are circumscribed to the analysis of chaotic systems. We have found no recommendation for the estimation of λ starting from the time series of classic systems. The reason for this is the interest in distinguishing variability due to a chaotic behavior of determinist dynamic systems of variability caused by white noise or linear stochastic processes, and less in the identification of non-linear terms from the analysis of time series. In this study we have centered in the dependence of the Lyapunov exponent, obtained by means of direct estimation, of the initial distance and the time evolution. We have used generated series of chaotic systems and generated series of classic systems with varying complexity. To generate the series we have used the logistic map.

Has the impact of the working time regulations changed neurosurgical trainees' attitudes towards the European working time directive 5 years on?

Science.gov (United States)

Cowie, Christopher J A; Pešić-Smith, Jonathan D; Boukas, Alexandros; Nelson, Richard J

2013-10-01

We report the results from a survey of the British Neurosurgical Trainees' Association which aimed to assess current rota patterns and their compliance with the government's working time regulations. The survey questioned whether trainees felt that shift working, imposed as a result of the European working time directive, is continuing to impact on patient care and training opportunities in neurosurgery. The responses to this survey indicate that neurosurgical trainees remain concerned with the impact that the current working time regulations have on all facets of their work: training, work- life balance, and the provision of patient care. The survey comments show that the majority would support a change in legislation to allow greater flexibility in the working time regulations.

Determination of micro amounts of praseodymium by analogue derivative spectrophotometry

International Nuclear Information System (INIS)

Ishii, Hajime; Satoh, Katsuhiko.

1986-01-01

Derivative spectrophotometry using the analogue differentiation circuit was applied to the determination of praseodymium at the ppm level. By the proposed method, in which the second or fourth derivative spectrum of the characteristic absorption band of praseodymium(III) at 444 nm is measured, as little as 3 ppm of praseodymium can be determined directly and easily even in the presence of large amounts of other rare earths without any prior separation. Interferences from neodymium, samarium, dysprosium, holmium and erbium ions which have characteristic absorption bands around 444 nm can easily be removed by utilizing the isosbestic point in the derivative spectra of praseodymium(III) and the interfering rare earth(III). (author)

Engineering aspects and time effects of rapid deterioration of sandstone in the tropical environment of Sabah, Malaysia

NARCIS (Netherlands)

Tating, F.F.; Hack, H.R.G.K.; Jetten, V.G.

2013-01-01

Cut slopes in rock masses start to deteriorate directly after excavation due to stress relief and weathering. The deterioration is a time dependent process that depends on the local climate and the rock mass including its history, and the environment. The amount of deterioration per time unit (‘the

Real-time decreased sensitivity to an audio-visual illusion during goal-directed reaching.

Directory of Open Access Journals (Sweden)

Luc Tremblay

Full Text Available In humans, sensory afferences are combined and integrated by the central nervous system (Ernst MO, Bülthoff HH (2004 Trends Cogn. Sci. 8: 162-169 and appear to provide a holistic representation of the environment. Empirical studies have repeatedly shown that vision dominates the other senses, especially for tasks with spatial demands. In contrast, it has also been observed that sound can strongly alter the perception of visual events. For example, when presented with 2 flashes and 1 beep in a very brief period of time, humans often report seeing 1 flash (i.e. fusion illusion, Andersen TS, Tiippana K, Sams M (2004 Brain Res. Cogn. Brain Res. 21: 301-308. However, it is not known how an unfolding movement modulates the contribution of vision to perception. Here, we used the audio-visual illusion to demonstrate that goal-directed movements can alter visual information processing in real-time. Specifically, the fusion illusion was linearly reduced as a function of limb velocity. These results suggest that cue combination and integration can be modulated in real-time by goal-directed behaviors; perhaps through sensory gating (Chapman CE, Beauchamp E (2006 J. Neurophysiol. 96: 1664-1675 and/or altered sensory noise (Ernst MO, Bülthoff HH (2004 Trends Cogn. Sci. 8: 162-169 during limb movements.

Evaluation of the 'amount effect' at speleothem sites in the Asian monsoon region

International Nuclear Information System (INIS)

Lee, Jung-Eun; Swann, Abigail L

2010-01-01

Oxygen isotope measurements from speleothems have been used to infer past hydrological cycles because the isotopic composition of precipitation is observed to decrease with increasing precipitation rates over low latitude coastal and island stations (the 'amount effect'). Here we show that local precipitation amount can be inferred from the differences in oxygen isotopic composition if the measurement site is in a subtropical coastal region where water vapor is transported directly from the ocean. The amount effect works because vapor from local evaporation and vapor imported from other regions have distinctly different isotopic compositions - the δ 18 O of vapor flux from evaporation is ∼10 per mille higher than the δ 18 O of imported vapor over subtropical oceanic regions - and precipitation is usually higher over the area with larger convergence. Thus, δ 18 O in precipitation can differentiate between the contribution of local evaporation and moisture convergence if the isotopic composition of local evaporation and or transported vapor remains relatively constant. Our work indicates that sites further inland may not be suitable for studying the changes in local precipitation amount but still reflect the combined changes of precipitation amount and changes in vapor transport pattern. We have shown that Hulu Cave is a reasonable site to interpret precipitation from δ 18 O p : estimated precipitation difference between present-day and Last Glacial Maximum (LGM) from measured δ 18 O p difference (1∼2 per mille ) would be 0.8-2.2 mm/day (lower during the LGM) assuming our model simulates evapotranspiration reasonably well at this site.

24 CFR 201.10 - Loan amounts.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Loan amounts. 201.10 Section 201.10... MORTGAGE AND LOAN INSURANCE PROGRAMS UNDER NATIONAL HOUSING ACT AND OTHER AUTHORITIES TITLE I PROPERTY IMPROVEMENT AND MANUFACTURED HOME LOANS Loan and Note Provisions § 201.10 Loan amounts. (a) Property...

Explaining Direct Care Resource Use of Nursing Home Residents: Findings from Time Studies in Four States

Science.gov (United States)

Arling, Greg; Kane, Robert L; Mueller, Christine; Lewis, Teresa

2007-01-01

Objective To explain variation in direct care resource use (RU) of nursing home residents based on the Resource Utilization Groups III (RUG-III) classification system and other resident- and unit-level explanatory variables. Data Sources/Study Setting Primary data were collected on 5,314 nursing home residents in 156 nursing units in 105 facilities from four states (CO, IN, MN, MS) from 1998 to 2004. Study Design Nurses and other direct care staff recorded resident-specific and other time caring for all residents on sampled nursing units. Care time was linked to resident data from the Minimum Data Set assessment instrument. Major variables were: RUG-III group (34-group), other health and functional conditions, licensed and other professional minutes per day, unlicensed minutes per day, and direct care RU (wage-weighted minutes). Resident- and unit-level relationships were examined through hierarchical linear modeling. Data Collection/Extraction Methods Time study data were recorded with hand-held computers, verified for accuracy by project staff at the data collection sites and then merged into resident and unit-level data sets. Principal Findings Resident care time and RU varied between and within nursing units. RUG-III group was related to RU; variables such as length of stay and unit percentage of high acuity residents also were significantly related. Case-mix indices (CMIs) constructed from study data displayed much less variation across RUG-III groups than CMIs from earlier time studies. Conclusions Results from earlier time studies may not be representative of care patterns of Medicaid and private pay residents. New RUG-III CMIs should be developed to better reflect the relative costs of caring for these residents. PMID:17362220

Direct Observation of Insulin Association Dynamics with Time-Resolved X-ray Scattering

Energy Technology Data Exchange (ETDEWEB)

Rimmerman, Dolev [Department; Leshchev, Denis [Department; Hsu, Darren J. [Department; Hong, Jiyun [Department; Kosheleva, Irina [Center; Chen, Lin X. [Department; Chemical

2017-09-05

Biological functions frequently require protein-protein interactions that involve secondary and tertiary structural perturbation. Here we study protein-protein dissociation and reassociation dynamics in insulin, a model system for protein oligomerization. Insulin dimer dissociation into monomers was induced by a nanosecond temperature-jump (T-jump) of ~8 °C in aqueous solution, and the resulting protein and solvent dynamics were tracked by time-resolved X-ray solution scattering (TRXSS) on time scales of 10 ns to 100 ms. The protein scattering signals revealed the formation of five distinguishable transient species during the association process that deviate from simple two state kinetics. Our results show that the combination of T-jump pump coupled to TRXSS probe allows for direct tracking of structural dynamics in nonphotoactive proteins.

Estimation of total amounts of anthropogenic radionuclides in the Japan Sea

International Nuclear Information System (INIS)

Ito, Toshimichi; Otosaka, Shigeyoshi; Kawamura, Hideyuki

2007-01-01

We estimated the total amounts of anthropogenic radionuclides, consisting of 90 Sr, 137 Cs, and 239+240 Pu, in the Japan Sea for the first time based on experimental data on their concentrations in seawater and seabed sediment. The radionuclide inventories in seawater and seabed sediment at each sampling site varied depending on the water depth, with total inventories for 90 Sr, 137 Cs, and 239+240 Pu in the range of 0.52-2.8 kBq m -2 , 0.64-4.1 kBq m -2 , and 27-122 Bq m -2 , respectively. Based on the relationship between the inventories and the water depths, the total amounts in the Japan Sea were estimated to be about 1.2±0.4 PBq for 90 Sr, 1.8±0.7 PBq for 137 Cs, and 69±14 TBq for 239+240 Pu, respectively; the amount ratio, 90 Sr: 137 Cs: 239+240 Pu, was 1.0:1.6:0.059. The amounts of 90 Sr and 137 Cs in the Japan Sea were in balance with those supplied from global fallout, whereas the amount of 239+240 Pu exceeded that supplied by fallout by nearly 40%. These results suggest a preferential accumulation of the plutonium isotopes. The data used in this study were obtained through a wide-area research project, named the 'Japan Sea expeditions (phase I),' covering the Japanese and Russian exclusive economic zones. (author)

Concentrations versus amounts of biomarkers in urine: a comparison of approaches to assess pyrethroid exposure

Directory of Open Access Journals (Sweden)

Bouchard Michèle

2008-11-01

Full Text Available Abstract Background Assessment of human exposure to non-persistent pesticides such as pyrethroids is often based on urinary biomarker measurements. Urinary metabolite levels of these pesticides are usually reported in volume-weighted concentrations or creatinine-adjusted concentrations measured in spot urine samples. It is known that these units are subject to intra- and inter-individual variations. This research aimed at studying the impact of these variations on the assessment of pyrethroid absorbed doses at individual and population levels. Methods Using data obtained from various adult and infantile populations, the intra and inter-individual variability in the urinary flow rate and creatinine excretion rate was first estimated. Individual absorbed doses were then calculated using volume-weighted or creatinine-adjusted concentrations according to published approaches and compared to those estimated from the amounts of biomarkers excreted in 15- or 24-h urine collections, the latter serving as a benchmark unit. The effect of the units of measurements (volume-weighted or creatinine adjusted concentrations or 24-h amounts on results of the comparison of pyrethroid biomarker levels between two populations was also evaluated. Results Estimation of daily absorbed doses of permethrin from volume-weighted or creatinine-adjusted concentrations of biomarkers was found to potentially lead to substantial under or overestimation when compared to doses reconstructed directly from amounts excreted in urine during a given period of time (-70 to +573% and -83 to +167%, respectively. It was also shown that the variability in creatinine excretion rate and urinary flow rate may introduce a bias in the case of between population comparisons. Conclusion The unit chosen to express biomonitoring data may influence the validity of estimated individual absorbed dose as well as the outcome of between population comparisons.

Just-in-Time Video Laryngoscopy Versus Direct Laryngoscopy for Neonatal Intubation.

Science.gov (United States)

Grgurich, Erin; Arnemann, Cynthia; Amon, Kim; Horton, Rose; Carlson, Jestin N

As neonatal endotracheal intubation (ETI) is a low-frequency, high-consequence event, it is essential that providers have access to resources to aid in ETI. We sought to determine the impact of video laryngoscopy (VL) with just-in-time training on intubation outcomes over direct laryngoscopy (DL) when performed by neonatal nurses. We conducted a prospective, randomized, crossover study with neonatal nurses employed at a level 2 neonatal intensive care unit (NICU). Nurses performed both DL and VL on a neonatal mannequin using a CMAC (Karl Storz Corp, Tuttlingen, Germany) either with the assistance of the screen (VL) or without (DL). Before performing the intubation, providers were given a just-in-time, brief education presentation and allowed to practice with the device. Each ETI attempt was reviewed to obtain the percentage of glottic opening (POGO) score, time to intubation (TTI, time from insertion of the blade into the mouth until the first breath was delivered), and time from blade insertion until the best POGO score. We enrolled 19 participants, with a median (interquartile range) of 20 (9-26) years of experience and having a median of 2 (1-3) intubations within the past year. None had used VL in the NICU previously. Median TTI did not differ between DL and VL: 19.9 (15.3-41.5) vs 20.3 (17.9-24.4) (P = 1). POGO scores and the number of attempts also did not differ between DL and VL. In our simulated setting, just-in-time VL training provided similar intubation outcomes compared with DL in ETI performed by neonatal nurses. Just-in-time VL education may be an alternative to traditional DL for neonatal intubations.

Calculation device for amount of heavy element nuclide in reactor fuels and calculation method therefor

International Nuclear Information System (INIS)

Naka, Takafumi; Yamamoto, Munenari.

1995-01-01

When there are two or more origins of deuterium nuclides in reactor fuels, there are disposed a memory device for an amount of deuterium nuclides for every origin in a noted fuel segment at a certain time point, a device for calculating the amount of nuclides for every origin and current neutron fluxes in the noted fuel segment, and a device for separating and then displaying the amount of deuterium nuclides for every origin. Equations for combustion are dissolved for every origin of the deuterium nuclides based on the amount of the deuterium nuclides for every origin and neutron fluxes, to calculate the current amount of deuterium nuclides for every origin. The amount of deuterium nuclides originated from uranium is calculated ignoring α-decay of curium, while the amount of deuterium nuclides originated from plutonium is calculated ignoring the generation of plutonium formed from neptunium. Deuterium nuclides can be measured and controlled accurately for every origin of the reactor fuels. Even when nuclear fuel materials have two or more nationalities, the measurement and control thereof can be conducted for every country. (N.H.)

Direct real-time neural evidence for task-set inertia.

Science.gov (United States)

Evans, Lisa H; Herron, Jane E; Wilding, Edward L

2015-03-01

One influential explanation for the costs incurred when switching between tasks is that they reflect interference arising from completing the previous task-known as task-set inertia. We report a novel approach for assessing task-set inertia in a memory experiment using event-related potentials (ERPs). After a study phase, participants completed a test block in which they switched between a memory task (retrieving information from the study phase) and a perceptual task. These tasks alternated every two trials. An ERP index of the retrieval of study information was evident in the memory task. It was also present on the first trial of the perceptual task but was markedly attenuated on the second. Moreover, this task-irrelevant ERP activity was positively correlated with a behavioral cost associated with switching between tasks. This real-time measure of neural activity thus provides direct evidence of task-set inertia, its duration, and the functional role it plays in switch costs. © The Author(s) 2015.

Catalyst inks and method of application for direct methanol fuel cells

Science.gov (United States)

Zelenay, Piotr; Davey, John; Ren, Xiaoming; Gottesfeld, Shimshon; Thomas, Sharon C.

2004-02-24

Inks are formulated for forming anode and cathode catalyst layers and applied to anode and cathode sides of a membrane for a direct methanol fuel cell. The inks comprise a Pt catalyst for the cathode and a Pt--Ru catalyst for the anode, purified water in an amount 4 to 20 times that of the catalyst by weight, and a perfluorosulfonic acid ionomer in an amount effective to provide an ionomer content in the anode and cathode surfaces of 20% to 80% by volume. The inks are prepared in a two-step process while cooling and agitating the solutions. The final solution is placed in a cooler and continuously agitated while spraying the solution over the anode or cathode surface of the membrane as determined by the catalyst content.

Alteration by irradiation and storage at amount of heme iron in poultry meat

International Nuclear Information System (INIS)

Souza, A.R.M. de; Arthur, V.; Canniatti-Brazaca, S.G.

2007-01-01

Studies of irradiation and storage effects in chicken were carried out to discover the influence in iron heme, non-heme amount, color and total pigments. Chicken thighs and chicken breast were studied. These were irradiated to 0, 1 and 2 kGy stored by 14 days to 4 °C in refrigerator. Determining the heme content and non-heme of meat was done using the colorimeter method and the Ferrozine reagent. The values of iron heme were influenced both by the irradiation and the storage, reducing the amount throughout the course of time. The iron non-heme was also influenced by the doses and the storage time, however the values increased throughout the course of time, because of the conversion of iron heme in non-heme. The color did not show that it was influenced by the studied doses, except for the storage, and the total number of pigments was affected by the irradiation and the time, reducing the values with the increase of storage. Irradiation was shown to be a good method to conserve iron. (author) [pt

Alteration by irradiation and storage at amount of heme iron in poultry meat

International Nuclear Information System (INIS)

Souza, Adriana Regia Marques de; Arthur, Valter Arthur; Canniatti-Brazaca, Solange Guidolin

2007-01-01

Studies of irradiation and storage effects in chicken were carried out to discover the influence in iron heme, non-heme amount, color and total pigments. Chicken thighs and chicken breast were studied. These were irradiated to 0, 1 and 2 kGy stored by 14 days to 4 deg C in refrigerator. Determining the heme content and non-heme of meat was done using the colorimeter method and the Ferrozine reagent. The values of iron heme were influenced both by the irradiation and the storage, reducing the amount throughout the course of time. The iron non-heme was also influenced by the doses and the storage time, however the values increased throughout the course of time, because of the conversion of iron heme in non-heme. The color did not show that it was influenced by the studied doses, except for the storage, and the total number of pigments was affected by the irradiation and the time, reducing the values with the increase of storage. Irradiation was shown to be a good method to conserve iron. (author)

The Relationship of Amount of Resection and Time for Recovery of Bell’s Phenomenon after Levator Resection in Congenital Ptosis

Science.gov (United States)

Goel, Ruchi; Kishore, Divya; Nagpal, Smriti; Jain, Sparshi; Agarwal, Tushar

2017-01-01

Background: Recovery of Bell`s phenomenon after levator resection is unpredicatable. Delayed recovery can result in vision threatening corneal complications. Aim: To study the variability of Bell’s phenomenon and time taken for its recovery following levator resection for blepharoptosis and to correlate it with the amount of resection. Methods: A prospective observational study was conducted on 32 eyes of 32 patients diagnosed as unilateral simple congenital blepharoptosis who underwent levator resection at a tertiary care center between July 2013 and May 2015. Patients were followed up for 5 months and correction of ptosis, type of Bell`s, duration of Bell`s recovery and complications were noted. Results: The study group ranged from 16-25 years with 15:17 male: female ratio. There were 9 mild, 16 moderate and 7 severe ptosis. Satisfactory correction was achieved in all cases. Good Bell`s recovery occurred in 13 eyes on first post-op day, in 2-14 days in 19 eyes and 28 days in 1 eye. Inverse Bell`s was noted along with lid oedema and ecchymosis in 2 patients. Large resections (23-26mm) were associated with poor Bell`s on the first postoperative day (p=0.027, Fisher`s exact test). However, the duration required for recovery of Bell`s phenomenon did not show any significant difference with the amount of resection. (p=0.248, Mann Whitney test). Larger resections resulted in greater lagophthalmos (correlation=0.830, p<0.0001). Patients with recovery of Bell`s delayed for more than 7 days were associated with greater number of complications (p=0.001 Fisher`s Exact Test). Conclusion: Close monitoring for Bell`s recovery is required following levator resection. PMID:28584563

Outcome and periprocedural time management in referred versus directly admitted stroke patients treated with thrombectomy.

Science.gov (United States)

Weber, Ralph; Reimann, Gernot; Weimar, Christian; Winkler, Angela; Berger, Klaus; Nordmeyer, Hannes; Hadisurya, Jeffrie; Brassel, Friedhelm; Kitzrow, Martin; Krogias, Christos; Weber, Werner; Busch, Elmar W; Eyding, Jens

2016-03-01

After thrombectomy has shown to be effective in acute stroke patients with large vessel occlusion, the potential benefit of secondary referral for such an intervention needs to be validated. We aimed to compare consecutive stoke patients directly admitted and treated with thrombectomy at a neurointerventional centre with patients secondarily referred for such a procedure from hospitals with a stroke unit. Periprocedure times and mortality in 300 patients primarily treated in eight neurointerventional centres were compared with 343 patients referred from nine other hospitals in a prospective multicentre study of a German neurovascular network. Data on functional outcome at 3 months was available in 430 (76.4%) patients. In-hospital mortality (14.8% versus 11.7%, p = 0.26) and 3 months mortality (21.9% versus 24.1%, p = 0.53) were not statistically different in both patient groups despite a significant shorter symptom to groin puncture time in directly admitted patients, which was mainly caused by a longer interfacility transfer time. We found a nonsignificant trend for better functional outcome at 3 months in directly admitted patients (modified Rankin Scale 0-2, 44.0% versus 35.7%, p = 0.08). Our results show that a drip-and-ship thrombectomy concept can be effectively organized in a metropolitan stroke network. Every effort should be made to speed up the emergency interfacility transfer to a neurointerventional centre in stroke patients eligible for thrombectomy after initial brain imaging.

Long Spin-Relaxation Times in a Transition-Metal Atom in Direct Contact to a Metal Substrate.

Science.gov (United States)

Hermenau, Jan; Ternes, Markus; Steinbrecher, Manuel; Wiesendanger, Roland; Wiebe, Jens

2018-03-14

Long spin-relaxation times are a prerequisite for the use of spins in data storage or nanospintronics technologies. An atomic-scale solid-state realization of such a system is the spin of a transition-metal atom adsorbed on a suitable substrate. For the case of a metallic substrate, which enables the direct addressing of the spin by conduction electrons, the experimentally measured lifetimes reported to date are on the order of only hundreds of femtoseconds. Here, we show that the spin states of iron atoms adsorbed directly on a conductive platinum substrate have a surprisingly long spin-relaxation time in the nanosecond regime, which is comparable to that of a transition metal atom decoupled from the substrate electrons by a thin decoupling layer. The combination of long spin-relaxation times and strong coupling to conduction electrons implies the possibility to use flexible coupling schemes to process the spin information.

A comparison of EGFR mutation testing methods in lung carcinoma: direct sequencing, real-time PCR and immunohistochemistry.

Directory of Open Access Journals (Sweden)

Bárbara Angulo

Full Text Available The objective of this study is to compare two EGFR testing methodologies (a commercial real-time PCR kit and a specific EGFR mutant immunohistochemistry, with direct sequencing and to investigate the limit of detection (LOD of both PCR-based methods. We identified EGFR mutations in 21 (16% of the 136 tumours analyzed by direct sequencing. Interestingly, the Therascreen EGFR Mutation Test kit was able to characterize as wild-type one tumour that could not be analyzed by direct sequencing of the PCR product. We then compared the LOD of the kit and that of direct sequencing using the available mutant tumours. The kit was able to detect the presence of a mutation in a 1% dilution of the total DNA in nine of the 18 tumours (50%, which tested positive with the real-time quantitative PCR method. In all cases, EGFR mutation was identified at a dilution of 5%. Where the mutant DNA represented 30% of the total DNA, sequencing was able to detect mutations in 12 out of 19 cases (63%. Additional experiments with genetically defined standards (EGFR ΔE746-A750/+ and EGFR L858R/+ yielded similar results. Immunohistochemistry (IHC staining with exon 19-specific antibody was seen in eight out of nine cases with E746-A750del detected by direct sequencing. Neither of the two tumours with complex deletions were positive. Of the five L858R-mutated tumours detected by the PCR methods, only two were positive for the exon 21-specific antibody. The specificity was 100% for both antibodies. The LOD of the real-time PCR method was lower than that of direct sequencing. The mutation specific IHC produced excellent specificity.

Preferences of dairy cows for three stall surface materials with small amounts of bedding.

Science.gov (United States)

Norring, M; Manninen, E; de Passillé, A M; Rushen, J; Saloniemi, H

2010-01-01

Farmers' concerns about the economy, cost of labor, and hygiene have resulted in reduced use of organic bedding in stalls for dairy cows; however, the reduced use of organic bedding possibly impairs cow comfort. The effects of different stall surface materials were evaluated in an unheated building in which only a small amount of bedding was used. The lying time and preferences of 18 cows using 3 stall surface materials (concrete, soft rubber mat, and sand) were compared. All materials were lightly bedded with a small amount of straw, and the amount of straw added to each stall was measured. The cows only had access to stalls of one surface type while their lying time was observed. Lying times were longest on the rubber mats compared with other surfaces (rubber mat 768; concrete 727; sand 707+/-16 min/d). In a preference test, cows had access to 2 of the 3 types of stalls for 10 d and their stall preference was measured. Cows preferred stalls with rubber mats to stalls with a concrete floor (median 73 vs. 18 from a total of 160 observations per day; interquartile range was 27 and 12, respectively), but showed no preference for sand stalls compared with stalls with a concrete floor or with rubber mats. More straw was needed on sand stalls compared with concrete or mat (638+/-13 g/d on sand, 468+/-10 g/d on concrete, and 464+/-8 g/d on rubber mats). Lying times on bedded mats indicated that mats were comfortable for the cows. If availability or cost of bedding material requires limiting the amount of bedding used, rubber mats may help maintain cow comfort. Copyright 2010 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Real-time ultrasound image classification for spine anesthesia using local directional Hadamard features.

Science.gov (United States)

Pesteie, Mehran; Abolmaesumi, Purang; Ashab, Hussam Al-Deen; Lessoway, Victoria A; Massey, Simon; Gunka, Vit; Rohling, Robert N

2015-06-01

Injection therapy is a commonly used solution for back pain management. This procedure typically involves percutaneous insertion of a needle between or around the vertebrae, to deliver anesthetics near nerve bundles. Most frequently, spinal injections are performed either blindly using palpation or under the guidance of fluoroscopy or computed tomography. Recently, due to the drawbacks of the ionizing radiation of such imaging modalities, there has been a growing interest in using ultrasound imaging as an alternative. However, the complex spinal anatomy with different wave-like structures, affected by speckle noise, makes the accurate identification of the appropriate injection plane difficult. The aim of this study was to propose an automated system that can identify the optimal plane for epidural steroid injections and facet joint injections. A multi-scale and multi-directional feature extraction system to provide automated identification of the appropriate plane is proposed. Local Hadamard coefficients are obtained using the sequency-ordered Hadamard transform at multiple scales. Directional features are extracted from local coefficients which correspond to different regions in the ultrasound images. An artificial neural network is trained based on the local directional Hadamard features for classification. The proposed method yields distinctive features for classification which successfully classified 1032 images out of 1090 for epidural steroid injection and 990 images out of 1052 for facet joint injection. In order to validate the proposed method, a leave-one-out cross-validation was performed. The average classification accuracy for leave-one-out validation was 94 % for epidural and 90 % for facet joint targets. Also, the feature extraction time for the proposed method was 20 ms for a native 2D ultrasound image. A real-time machine learning system based on the local directional Hadamard features extracted by the sequency-ordered Hadamard transform for

Comparative study on direct and indirect bracket bonding techniques regarding time length and bracket detachment

Directory of Open Access Journals (Sweden)

Jefferson Vinicius Bozelli

2013-12-01

Full Text Available OBJECTIVE: The aim of this study was to assess the time spent for direct (DBB - direct bracket bonding and indirect (IBB - indirect bracket bonding bracket bonding techniques. The time length of laboratorial (IBB and clinical steps (DBB and IBB as well as the prevalence of loose bracket after a 24-week follow-up were evaluated. METHODS: Seventeen patients (7 men and 10 women with a mean age of 21 years, requiring orthodontic treatment were selected for this study. A total of 304 brackets were used (151 DBB and 153 IBB. The same bracket type and bonding material were used in both groups. Data were submitted to statistical analysis by Wilcoxon non-parametric test at 5% level of significance. RESULTS: Considering the total time length, the IBB technique was more time-consuming than the DBB (p < 0.001. However, considering only the clinical phase, the IBB took less time than the DBB (p < 0.001. There was no significant difference (p = 0.910 for the time spent during laboratorial positioning of the brackets and clinical session for IBB in comparison to the clinical procedure for DBB. Additionally, no difference was found as for the prevalence of loose bracket between both groups. CONCLUSION: the IBB can be suggested as a valid clinical procedure since the clinical session was faster and the total time spent for laboratorial positioning of the brackets and clinical procedure was similar to that of DBB. In addition, both approaches resulted in similar frequency of loose bracket.

Control of Strobilurin Fungicides in Wheat Using Direct Analysis in Real Time Accurate Time-of-Flight and Desorption Electrospray Ionization Linear Ion Trap Mass Spectrometry

NARCIS (Netherlands)

Schurek, J.; Vaclavik, L.; Hooijerink, H.; Lacina, O.; Poustka, J.; Sharman, M.; Caldow, M.; Nielen, M.W.F.; Hajslova, J.

2008-01-01

Ambient mass spectrometry has been used for the analysis of strobilurin residues in wheat. The use of this novel, challenging technique, employing a direct analysis in a real time (DART) ion-source coupled with a time-of-flight mass spectrometer (TOF MS) and a desorption electrospray ionization

Real-time dynamic analysis for complete loop of direct steam generation solar trough collector

International Nuclear Information System (INIS)

Guo, Su; Liu, Deyou; Chu, Yinghao; Chen, Xingying; Shen, Bingbing; Xu, Chang; Zhou, Ling; Wang, Pei

2016-01-01

Highlights: • A nonlinear distribution parameter dynamic model has been developed. • Real-time local heat transfer coefficient and friction coefficient are adopted. • The dynamic behavior of the solar trough collector loop are simulated. • High-frequency chattering of outlet fluid flow are analyzed and modeled. • Irradiance disturbance at subcooled water region generates larger influence. - Abstract: Direct steam generation is a potential approach to further reduce the levelized electricity cost of solar trough. Dynamic modeling of the collector loop is essential for operation and control of direct steam generation solar trough. However, the dynamic behavior of fluid based on direct steam generation is complex because of the two-phase flow in the pipeline. In this work, a nonlinear distribution parameter model has been developed to model the dynamic behaviors of direct steam generation parabolic trough collector loops under either full or partial solar irradiance disturbance. Compared with available dynamic model, the proposed model possesses two advantages: (1) real-time local values of heat transfer coefficient and friction resistance coefficient, and (2) considering of the complete loop of collectors, including subcooled water region, two-phase flow region and superheated steam region. The proposed model has shown superior performance, particularly in case of sensitivity study of fluid parameters when the pipe is partially shaded. The proposed model has been validated using experimental data from Solar Thermal Energy Laboratory of University of New South Wales, with an outlet fluid temperature relative error of only 1.91%. The validation results show that: (1) The proposed model successfully outperforms two reference models in predicting the behavior of direct steam generation solar trough. (2) The model theoretically predicts that, during solar irradiance disturbance, the discontinuities of fluid physical property parameters and the moving back and

26 CFR 1.465-20 - Treatment of amounts borrowed from certain persons and amounts protected against loss.

Science.gov (United States)

2010-04-01

... not increase the taxpayer's amount at risk because they are borrowed from a person who has an interest in the activity other than that of a creditor or from a person who is related to a person (other than the taxpayer) who has an interest in the activity other than that of a creditor; and (2) Amounts...

Exposure amount and timing of solar irradiation during pregnancy and the risk of sensitization in children.

Science.gov (United States)

Koh, Hyun Yong; Cho, Eunhae; Lee, So-Yeon; Kim, Woo Kyung; Park, Yong Mean; Kim, Jihyun; Ahn, Kangmo; Lee, Seung Won; Kim, Mi Ae; Hahm, Myung-Il; Chae, Yoomi; Lee, Kee-Jae; Kwon, Ho-Jang; Han, Man Yong

2018-04-01

Solar irradiation affects sensitization to aeroallergens and the prevalence of allergic diseases. Little is known, however, about how the time and amount of solar irradiation during pregnancy affects such risks in children. We aimed to find out how solar irradiation during pregnancy affects sensitization to aero-allergens and the prevalence of allergic diseases in children. This population-based cross-sectional study involved 7301 aged 6 years and aged 12 years children. Maternal exposure to solar irradiation during pregnancy was evaluated using data from weather stations closest to each child's birthplace. Monthly average solar irradiation during the second and third trimesters was calculated with rank by quartiles. Risks of allergic sensitization and allergic disease were estimated. Relative to the first (lowest) quartile, the adjusted odds ratio (aOR) for allergic sensitization in the fourth (highest) quartile was lowest within solar irradiation during pregnancy months 5-6 (aOR = 0.823, 95% CI 0.720-0.942, p solar irradiation (aOR = 1.167, 95% CI 1.022-1.333, p solar irradiation was analyzed as a continuous variable during months 5 (aOR = 0.975, 95% CI 0.962-0.989, p solar irradiation during months 7-8 increased the risk of asthma (aOR = 1.309, 95% CI 1.024-1.674, p = 0.032). Maternal exposure to solar irradiation during the second trimester of pregnancy associated with reduced aeroallergen sensitization, whereas solar irradiation during the third trimester was related to increased sensitization to aeroallergens. Copyright © 2017 Japanese Society of Allergology. Production and hosting by Elsevier B.V. All rights reserved.

Smallish foreign direct investment, sluggish growth: Can ...

International Development Research Centre (IDRC) Digital Library (Canada)

Smallish foreign direct investment, sluggish growth: Can MERCOSUR do better? 08 décembre 2010. Edgard Rodriguez. GGP One-pager series. Since the 1990s, foreign direct investment (FDI) has been on the rise worldwide. By 2008, the world's FDI flows amounted to about $1.7 trillion (although they are expected to go ...

Time stamp generation with inverse FIR filters for Positron Emission Tomography

International Nuclear Information System (INIS)

Namias, Mauro

2009-01-01

Photon coincidence detection is the process by which Positron Emission Tomography (PET) works. This requires the determination of the time of impact of each coincident photon at the detector system, also known as time stamp. In this work, the timestamp was generated by means of digital time-domain deconvolution with FIR filters for a INa(Tl) based system. The detector deadtime was reduced from 350 ns to 175 ns while preserving the system's energy resolution and a direct relation between the amount of light collected and the temporal resolution was found.(author)

Timing-Constrained FPGA Placement: A Force-Directed Formulation and Its Performance Evaluation

Directory of Open Access Journals (Sweden)

Srilata Raman

1996-01-01

Full Text Available In this paper we present a simple but efficient timing-driven placement algorithm for FPGAs. The algorithm computes forces acting on a logic block in the FPGA to determine its relative location with respect to other blocks. The forces depend on the criticality of nets shared between the two blocks. Unlike other net-based approaches, timing constraints are incorporated directly into the force equations to guide the placement. Slot assignment is then used to move the blocks into valid slot locations on the FPGA chip. The assignment algorithm also makes use of the delay information of nets so that the final placement is able to meet the timing criteria specified for the circuit. The novelty of the approach lies in the formulation of the force equations and the manner in which weights of the nets are dynamically altered to influence the placement. Experiments conducted on industrial test circuits and MCNC circuits give very promising results and indicate that the algorithm succeeds in significantly reducing the maximum delay in the circuit. In addition, routability is not adversely affected and running time is low.

Persistence of malathion residues in stored milled rice: Direct and indirect applications

International Nuclear Information System (INIS)

Arshad, J.H.

1990-01-01

Two experiments were carried out: (i) to study the persistence of malathion residues in stored milled rice following multiple applications of 14 C-malathion to the bagged rice and (ii) to determine the degradation of malathion in stored milled rice and stored paddy following direct and single application of 14 C-malathion. The storage conditions were similar to those found in the local rice godowns. Three applications of malathion to the bagged milled rice resulted in the accumulation of malathion and its metabolites in and/or on the rice grains over the storage period. After 9 months' storage, ca. 4% of the total applied radioactivity, which amounted to 10 μg/g equivalent of 14 C residues, were found in and/or on the grains. About one fourth of the residue remained as the unchanged parent compound. On the other hand, when 14 C-malathion at the 10 ppm level was mixed directly with the milled rice or paddy prior to storage, the amount of malathion (recovered in the chloroform extracts) decreased from 6.2 μg/g at zero time to 2.9 μg/g after 3 months' storage for the milled rice samples. The major metabolite in the milled rice and paddy samples was malathion monocarboxylic acid with trace amounts of malathion dicarboxylic acid and malaoxon. (author). 5 refs, 3 tabs

Direct analysis of biological samples by total reflection X-ray fluorescence

International Nuclear Information System (INIS)

Lue M, Marco P.; Hernandez-Caraballo, Edwin A.

2004-01-01

The technique of total reflection X-ray fluorescence (TXRF) is well suited for the direct analysis of biological samples due to the low matrix interferences and simultaneous multi-element nature. Nevertheless, biological organic samples are frequently analysed after digestion procedures. The direct determination of analytes requires shorter analysis time, low reactive consumption and simplifies the whole analysis process. On the other hand, the biological/clinical samples are often available in minimal amounts and routine studies require the analysis of large number of samples. To overcome the difficulties associated with the analysis of organic samples, particularly of solid ones, different procedures of sample preparation and calibration to approach the direct analysis have been evaluated: (1) slurry sampling, (2) Compton peak standardization, (3) in situ microwave digestion, (4) in situ chemical modification and (5) direct analysis with internal standardization. Examples of analytical methods developed by our research group are discussed. Some of them have not been previously published, illustrating alternative strategies for coping with various problems that may be encountered in the direct analysis by total reflection X-ray fluorescence spectrometry

Effects over time of self-reported direct and vicarious racial discrimination on depressive symptoms and loneliness among Australian school students.

Science.gov (United States)

Priest, Naomi; Perry, Ryan; Ferdinand, Angeline; Kelaher, Margaret; Paradies, Yin

2017-02-03

Racism and racial discrimination are increasingly acknowledged as a critical determinant of health and health inequalities. However, patterns and impacts of racial discrimination among children and adolescents remain under-investigated, including how different experiences of racial discrimination co-occur and influence health and development over time. This study examines associations between self-reported direct and vicarious racial discrimination experiences and loneliness and depressive symptoms over time among Australian school students. Across seven schools, 142 students (54.2% female), age at T1 from 8 to 15 years old (M = 11.14, SD = 2.2), and from diverse racial/ethnic and migration backgrounds (37.3% born in English-speaking countries as were one or both parents) self-reported racial discrimination experiences (direct and vicarious) and mental health (depressive symptoms and loneliness) at baseline and 9 months later at follow up. A full cross-lagged panel design was modelled using MPLUS v.7 with all variables included at both time points. A cross-lagged effect of perceived direct racial discrimination on later depressive symptoms and on later loneliness was found. As expected, the effect of direct discrimination on both health outcomes was unidirectional as mental health did not reciprocally influence reported racism. There was no evidence that vicarious racial discrimination influenced either depressive symptoms or loneliness beyond the effect of direct racial discrimination. Findings suggest direct racial discrimination has a persistent effect on depressive symptoms and loneliness among school students over time. Future work to explore associations between direct and vicarious discrimination is required.

Between Amount and Significance: The 'Capitalist' Aspect of Leisure

Science.gov (United States)

Gross, Zehavit

2016-01-01

The aim of this paper is to analyse the disparity between the time adolescents devote to various leisure activities and the significance they attribute to them. The gap between amount and significance mirrors the way that adolescents in Israel perceive the concept of leisure and the content with which they fill it. Leisure is a phenomenon that is…

A novel dosimeter for measuring the amount of radiation exposure of surgeons during percutaneous nephrolithotomy: Instadose™

Science.gov (United States)

Yuruk, Emrah; Gureser, Gokhan; Tuken, Murat; Ertas, Kasim

2016-01-01

Introduction The aim of this study was to demonstrate the efficacy of Instadose™, a novel dosimeter designed for radiation workers to provide a measurement of the radiation dose at any time from any computer; to determine the amount of radiation exposure during percutaneous nephrolithotomy (PNL); and to evaluate the factors that affect the amount of radiation exposed. Material and methods Two experienced surgeons wore Instadose™ on the outer part of their lead aprons during the PNL procedures performed between December 2013 and July 2014. Patient demographics and stone characteristics were noted. Factors affecting radiation dose were determined. Fluoroscopic screening time was compared with the amount of radiation in order to validate the measurements of Instadose™. Results Overall, 51 patients with a mean age of 43.41 ±18.58 (range 1–75) years were enrolled. Male to female ratio was 35/16. The amount of radiation was greater than 0.01mSv in only 19 (37.25%) cases. Stone location complexity (p = 0.380), dilation type (p = 0.584), stone size (p = 0.565), dilation size (p = 0.891) and access number (p = 0.268) were not associated with increased radiation exposure. Instadose™ measurements were correlated with fluoroscopic screening time (r = 0.519, p = 0.001). Conclusions Instadose™ is a useful tool for the measurement of radiation exposure during PNL. The advantage of measuring the amount of radiation exposure after each PNL operation is that it may aid urologists in taking appropriate precautions to minimize the risk of radiation related complications. PMID:27551558

Ingestive behavior of heifers in Alexandergrass pasture receiving different amounts of oat grain as supplement

Directory of Open Access Journals (Sweden)

Maria José de Oliveira Sichonany

2015-08-01

Full Text Available This study was conducted to evaluate the ingestive behavior, displacement patterns and meal dynamics of beef heifers in Alexandergrass pasture (Urochloa plantaginea (Link. Hitch receiving different amounts of oat grain: 0, 0.80 and 1.12% of body weight (BW. The grazing method was continuous with put-and-take stocking. The experimental design was completely randomized following a repeated measure arrangement. The grazing time decreased and the idling time increased when beef heifers were supplemented, independently of supplement amount, while the rumination time was similar across supplement amounts. The number of feeding stations per minute and the number of steps taken between each feeding station were similar regardless of supplementation. When receiving 1.12% of BW of oat grain, heifers remained longer in each feeding station and took fewer steps per minute. The number of meals decreased and the duration of breaks between meals increased when heifers received oat grain. The duration of each meal was similar for heifers receiving supplement than for those that did not. Understanding how animals adjust their grazing behavior and cope with changing environmental dynamics is essential for the development of management strategies designed to optimize animal production.

Research Directions in Real-Time Systems.

Science.gov (United States)

1996-09-01

This report summarizes a survey of published research in real time systems . Material is presented that provides an overview of the topic, focusing on...communications protocols and scheduling techniques. It is noted that real - time systems deserve special attention separate from other areas because of...formal tools for design and analysis of real - time systems . The early work on applications as well as notable theoretical advances are summarized

To total amount of activity ..... and beyond: Perspectives on measuring physical behaviour

Directory of Open Access Journals (Sweden)

Johannes B.J. Bussmann

2013-07-01

Full Text Available The aim of this paper is to describe and discuss some perspectives on definitions, constructs and outcome parameters of physical behaviour. The paper focuses on the following constructs: Physical activity & active lifestyle vs. sedentary behaviour & sedentary lifestyle; Amount of physical activity vs. amount of walking; Detailed body posture & movement data vs. overall physical activity data; Behavioural context of activities; Quantity vs. quality; Physical behaviour vs. physiological response.Subsequently, the following outcome parameters provided by data reduction procedures are discussed: Distribution of length of bouts; Variability in bout length; Time window; Intensity and intensity threshold.The overview indicates that physical behaviour is a multi-dimensional construct, and it stresses the importance and relevance of constructs and parameters other than total amount of physical activity.It is concluded that the challenge for the future will be to determine which parameters are most relevant, valid and responsive. This is a matter for physical behaviour researchers to consider, that is critical to multi-disciplinary collaboration.

Direct matrix-assisted laser desorption ionization time-of-flight mass spectrometry improves appropriateness of antibiotic treatment of bacteremia.

Directory of Open Access Journals (Sweden)

Anne L M Vlek

Full Text Available Matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS allows the identification of microorganisms directly from positive blood culture broths. Use of the MALDI-TOF MS for rapid identification of microorganisms from blood culture broths can reduce the turnaround time to identification and may lead to earlier appropriate treatment of bacteremia. During February and April 2010, direct MALDI-TOF MS was routinely performed on all positive blood cultures. During December 2009 and March 2010 no direct MALDI-TOF MS was used. Information on antibiotic therapy was collected from the hospital and intensive care units' information systems from all positive blood cultures during the study period. In total, 253 episodes of bacteremia were included of which 89 during the intervention period and 164 during the control period. Direct performance of MALDI-TOF MS on positive blood culture broths reduced the time till species identification by 28.8-h and was associated with an 11.3% increase in the proportion of patients receiving appropriate antibiotic treatment 24 hours after blood culture positivity (64.0% in the control period versus 75.3% in the intervention period (p0.01. Routine implementation of this technique increased the proportion of patients on adequate antimicrobial treatment within 24 hours.

Direct matrix-assisted laser desorption ionization time-of-flight mass spectrometry improves appropriateness of antibiotic treatment of bacteremia.

Science.gov (United States)

Vlek, Anne L M; Bonten, Marc J M; Boel, C H Edwin

2012-01-01

Matrix assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) allows the identification of microorganisms directly from positive blood culture broths. Use of the MALDI-TOF MS for rapid identification of microorganisms from blood culture broths can reduce the turnaround time to identification and may lead to earlier appropriate treatment of bacteremia. During February and April 2010, direct MALDI-TOF MS was routinely performed on all positive blood cultures. During December 2009 and March 2010 no direct MALDI-TOF MS was used. Information on antibiotic therapy was collected from the hospital and intensive care units' information systems from all positive blood cultures during the study period. In total, 253 episodes of bacteremia were included of which 89 during the intervention period and 164 during the control period. Direct performance of MALDI-TOF MS on positive blood culture broths reduced the time till species identification by 28.8-h and was associated with an 11.3% increase in the proportion of patients receiving appropriate antibiotic treatment 24 hours after blood culture positivity (64.0% in the control period versus 75.3% in the intervention period (p0.01)). Routine implementation of this technique increased the proportion of patients on adequate antimicrobial treatment within 24 hours.

Technique for measuring picomolar amounts of bound and unbound amino acids obtained from myogenic cell cultures of skeletal muscle

International Nuclear Information System (INIS)

Bullaro, J.C.

1981-01-01

A procedure is described that compares the isotope dilution method of measuring picomolar amounts of amino acids obtained from cellular extracts with a direct method of analysis. Evidence is provided that shows that the direct method is at least as accurate as the isotope dilution method. In addition the direct method is as expedient an requires but a single isotope and fewer chromatograms for analysis. A procedure also is described for selecting the appropriate conditions for dansylation and for measuring the loss of dansyl amino acid due to decomposition

12 CFR 347.120 - Computation of investment amounts.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Computation of investment amounts. 347.120... GENERAL POLICY INTERNATIONAL BANKING § 347.120 Computation of investment amounts. In computing the amount that may be invested in any foreign organization under §§ 347.117 through 347.119, any investments held...

Effect of increasing amounts of straw on pigs’ explorative behaviour

DEFF Research Database (Denmark)

Jensen, Margit Bak; Herskin, Mette S.; Forkman, Björn

2015-01-01

According to European legislation, pigs must have permanent access to sufficient quantity of materialto enable manipulation activities. However, few studies have quantified how much straw is needed tofulfil the requirements of growing pigs. We investigated the effect of increasing amount of straw...... on pigs’manipulation of the straw, and hypothesised that after a certain point increasing straw amount will nolonger increase oral manipulation further. From 30 to 80 kg live weight, pigs were housed in 90 groups of18 pigs in pens (5.48 m × 2.48 m) with partly slatted concrete floor and daily provided...... with the percentage ofpigs manipulating straw simultaneously. This was recorded in three 1-h intervals (1 h before and 1 h afterstraw allocation in the morning, as well as from 17 to 18 h in the afternoon). With increasing quantity ofstraw provided, we found a curvilinear (P increase in the time spent in oral...

Secular variation of the amount of nuclear information and its interpretation by a media-public interaction model

International Nuclear Information System (INIS)

Ohnishi, Teruaki

1998-01-01

Time dependent characteristics of the amount of nuclear information fed by the Japanese press are explained by a nonlinear model with mutual interaction between the media and the public. In the secular variation of that amount since the early 1950s, there appears semicyclicly oscillating fine structure of that amount with a period of several months superposed on a background having a feature of slowly varying wave of information with a period of around ten years. A model is proposed such that an individual media determines its reportorial stance using the response of the public to the preceding information and the general tendency of the other media as measures of judgement. Since the structure of this model resembles to that of an evolving ecosystem, the paradigm shift in nuclear information can be interpreted by analogy with the succession of facies in an ecological system. Moreover, the slowly time-varying waves of information associated with the paradigm shift is found to be grasped as a resultant of prevalence phenomenon if the nuclear paradigm is regarded as a sort of prevalence. The oscillation of the amount of information in a short time scale, on the other hand, is found to appear as a result of the competition between the extent of reflection of the present amount of information to the next information and the extent of reflection of the reportorial state of the other media also to the next information under the existence of public response. Those characteristics regarding the amount of nuclear information are found to come out as necessary consequences of the society with mutual stimulation between the media and the public. (author)

7 CFR 1710.107 - Amount lent for acquisitions.

Science.gov (United States)

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Amount lent for acquisitions. 1710.107 Section 1710... GUARANTEES Loan Purposes and Basic Policies § 1710.107 Amount lent for acquisitions. The maximum amount that will be lent for an acquisition is limited to the value of the property, as determined by RUS. If the...

24 CFR 232.565 - Maximum loan amount.

Science.gov (United States)

2010-04-01

... URBAN DEVELOPMENT MORTGAGE AND LOAN INSURANCE PROGRAMS UNDER NATIONAL HOUSING ACT AND OTHER AUTHORITIES MORTGAGE INSURANCE FOR NURSING HOMES, INTERMEDIATE CARE FACILITIES, BOARD AND CARE HOMES, AND ASSISTED... Fire Safety Equipment Eligible Security Instruments § 232.565 Maximum loan amount. The principal amount...

Comparison of Direct Solar Energy to Resistance Heating for Carbothermal Reduction of Regolith

Science.gov (United States)

Muscatello, Anthony C.; Gustafson, Robert J.

2011-01-01

A comparison of two methods of delivering thermal energy to regolith for the carbo thermal reduction process has been performed. The comparison concludes that electrical resistance heating is superior to direct solar energy via solar concentrators for the following reasons: (1) the resistance heating method can process approximately 12 times as much regolith using the same amount of thermal energy as the direct solar energy method because of superior thermal insulation; (2) the resistance heating method is more adaptable to nearer-term robotic exploration precursor missions because it does not require a solar concentrator system; (3) crucible-based methods are more easily adapted to separation of iron metal and glass by-products than direct solar energy because the melt can be poured directly after processing instead of being remelted; and (4) even with projected improvements in the mass of solar concentrators, projected photovoltaic system masses are expected to be even lower.

Influence of increasing amount of recycled concrete powder on mechanical properties of cement paste

Science.gov (United States)

Topič, Jaroslav; Prošek, Zdeněk; Plachý, Tomáš

2017-09-01

This paper deals with using fine recycled concrete powder in cement composites as micro-filler and partial cement replacement. Binder properties of recycled concrete powder are given by exposed non-hydrated cement grains, which can hydrate again and in small amount replace cement or improve some mechanical properties. Concrete powder used in the experiments was obtained from old railway sleepers. Infrastructure offer more sources of old concrete and they can be recycled directly on building site and used again. Experimental part of this paper focuses on influence of increasing amount of concrete powder on mechanical properties of cement paste. Bulk density, shrinkage, dynamic Young’s modulus, compression and flexural strength are observed during research. This will help to determine limiting amount of concrete powder when decrease of mechanical properties outweighs the benefits of cement replacement. The shrinkage, dynamic Young’s modulus and flexural strength of samples with 20 to 30 wt. % of concrete powder are comparable with reference cement paste or even better. Negative effect of concrete powder mainly influenced the compression strength. Only a 10 % cement replacement reduced compression strength by about 25 % and further decrease was almost linear.

Transfer Entropy Estimation and Directional Coupling Change Detection in Biomedical Time Series

Directory of Open Access Journals (Sweden)

Lee Joon

2012-04-01

Full Text Available Abstract Background The detection of change in magnitude of directional coupling between two non-linear time series is a common subject of interest in the biomedical domain, including studies involving the respiratory chemoreflex system. Although transfer entropy is a useful tool in this avenue, no study to date has investigated how different transfer entropy estimation methods perform in typical biomedical applications featuring small sample size and presence of outliers. Methods With respect to detection of increased coupling strength, we compared three transfer entropy estimation techniques using both simulated time series and respiratory recordings from lambs. The following estimation methods were analyzed: fixed-binning with ranking, kernel density estimation (KDE, and the Darbellay-Vajda (D-V adaptive partitioning algorithm extended to three dimensions. In the simulated experiment, sample size was varied from 50 to 200, while coupling strength was increased. In order to introduce outliers, the heavy-tailed Laplace distribution was utilized. In the lamb experiment, the objective was to detect increased respiratory-related chemosensitivity to O2 and CO2 induced by a drug, domperidone. Specifically, the separate influence of end-tidal PO2 and PCO2 on minute ventilation (V˙E before and after administration of domperidone was analyzed. Results In the simulation, KDE detected increased coupling strength at the lowest SNR among the three methods. In the lamb experiment, D-V partitioning resulted in the statistically strongest increase in transfer entropy post-domperidone for PO2→V˙E. In addition, D-V partitioning was the only method that could detect an increase in transfer entropy for PCO2→V˙E, in agreement with experimental findings. Conclusions Transfer entropy is capable of detecting directional coupling changes in non-linear biomedical time series analysis featuring a small number of observations and presence of outliers. The results

Dynamic Thermodynamics with Internal Energy, Volume, and Amount of Moles as States : Application to Liquefied Gas Tank

NARCIS (Netherlands)

Arendsen, A. R. J.; Versteeg, G. F.

2009-01-01

Dynamic models for process design, optimization, and control usually solve a set of heat and/or mass balances as a function of time and/or position in the process. To obtain more robust dynamic models and to minimize the amount of assumptions, internal energy, volume, and amount of moles are chosen

Confirming therapeutic target of protopine using immobilized β2 -adrenoceptor coupled with site-directed molecular docking and the target-drug interaction by frontal analysis and injection amount-dependent method.

Science.gov (United States)

Liu, Guangxin; Wang, Pei; Li, Chan; Wang, Jing; Sun, Zhenyu; Zhao, Xinfeng; Zheng, Xiaohui

2017-07-01

Drug-protein interaction analysis is pregnant in designing new leads during drug discovery. We prepared the stationary phase containing immobilized β 2 -adrenoceptor (β 2 -AR) by linkage of the receptor on macroporous silica gel surface through N,N'-carbonyldiimidazole method. The stationary phase was applied in identifying antiasthmatic target of protopine guided by the prediction of site-directed molecular docking. Subsequent application of immobilized β 2 -AR in exploring the binding of protopine to the receptor was realized by frontal analysis and injection amount-dependent method. The association constants of protopine to β 2 -AR by the 2 methods were (1.00 ± 0.06) × 10 5 M -1 and (1.52 ± 0.14) × 10 4 M -1 . The numbers of binding sites were (1.23 ± 0.07) × 10 -7 M and (9.09 ± 0.06) × 10 -7 M, respectively. These results indicated that β 2 -AR is the specific target for therapeutic action of protopine in vivo. The target-drug binding occurred on Ser 169 in crystal structure of the receptor. Compared with frontal analysis, injection amount-dependent method is advantageous to drug saving, improvement of sampling efficiency, and performing speed. It has grave potential in high-throughput drug-receptor interaction analysis. Copyright © 2017 John Wiley & Sons, Ltd.

Determinants Of Foreign Direct Investment In Mauritius Evidence From Time Series Data

Directory of Open Access Journals (Sweden)

Medha Kisto

2017-08-01

Full Text Available Over the last two decades Foreign Direct Investment FDI claimed an impressive economic record as it enables economy to transit from an agrarian to knowledge based economy. This paper focuses on the determinants and impact of FDI in Mauritius using annual time series data from 1975 through 2015. The Vector Error Correction Model VECM analysis reveals that macroeconomic variables namely inflation rates and exchange rate are among the major and important factor that affect FDI in Mauritius over this period of time. Exchange rate exhibited negative significant influence on FDI while interest rate affects FDI positively. The study therefore recommends that government should continue to diversify the export and tourism markets ensure stable macroeconomic policies implement reforms on doing business increase its expenditure in the area of infrastructural development and redirect FDI in productive sector of the economy as ways to accelerate the growth of Mauritian economy.

24 CFR 891.525 - Amount and terms of financing.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Amount and terms of financing. 891... Handicapped-Section 8 Assistance § 891.525 Amount and terms of financing. (a) The amount of financing approved... financing provided shall not exceed the lesser of: (1) The dollar amounts stated in paragraphs (b) through...

Determination of micro amounts of samarium and europium by analogue derivative spectrophotometry

International Nuclear Information System (INIS)

Ishii, H.; Satoh, K.

1982-01-01

Derivative spectrophotometry using the analogue differentiation circuit was applied to the determination of samarium and europium at ppm levels. By measuring the second or the fourth derivative spectra of the characteristic absorption bands of both the rare earth ions around 400 nm, they can be determined directly and selectively in the presence of large amounts of most other rare earths without any prior separation. Further, aptly selecting conditions for the measurement of the derivative spectra, the simultaneous determination of both the rare earth elements was feasible. The principle and the characteristics of analogue derivative spectrophotometry are also described. (orig.) [de

Infant and Early Childhood Exposure to Adult-Directed and Child-Directed Television Programming: Relations with Cognitive Skills at Age Four

Science.gov (United States)

Barr, Rachel; Lauricella, Alexis; Zach, Elizabeth; Calvert, Sandra L.

2010-01-01

This study described the relations among the amount of child-directed versus adult-directed television exposure at ages 1 and 4 with cognitive outcomes at age 4. Sixty parents completed 24-hour television diaries when their children were 1 and 4 years of age. At age 4, their children also completed a series of cognitive measures and parents…

Enrichment and determination of small amounts of 90Sr/90Y in water samples

International Nuclear Information System (INIS)

Mundschenk, H.

1979-01-01

Small amounts of 90 Sr/ 90 Y can be concentrated from large volumes of surface water (100 l) by precipitation of the phosphates, using bentonite as adsorber matrix. In the case of samples containing no or nearly no suspended matter (tap water, ground water, sea water), the daughter 90 Y can be extracted directly by using filter beds impregnated with HDEHP. The applicability of both techniques is demonstrated under realistic conditions. (orig.) 891 HP/orig. 892 MKO [de

Amount of platelet-bound IgG in chronic autoimmune thrombocytopenic purpura (ITP): absence of significant influence on platelet survival and destruction-site

International Nuclear Information System (INIS)

Leners, N.; Ferrant, A.; Beckers, C.

1982-01-01

The amount of platelet-bound IgG, as measured with a direct Coombs radioactive antiglobulin test, could not be correlated with either platelet survival or the site of platelet destruction in 22 patients with chronic ITP. The amount of platelet-bound IgG may not be an index of severity in this disease, nor does it offer an indication on the site of destruction of platelets

Comparison between direct transesterification of microalgae and hydrochar

Directory of Open Access Journals (Sweden)

Vo Thanh Phuoc

2017-07-01

Full Text Available Hydrothermal carbonization (HTC of microalgae is one of processes that can effectively remove moisture from microalgae. In addition, the hydrochar retains most of fatty acids from microalgae feedstock, and the content of fatty acids in hydrochar is doubled. This research concentrates on the comparison between direct transesterification of microalgae and hydrochar. The result shows that the biodiesel yields of hydrochar were higher than those of microalgae at the same reaction conditions due to the higher extraction rate of fatty acids from hydrochar. Finally, the amount of methanol and catalyst which is required for a given amount of microalgae can be reduced to a half through the direct transesterification of hydrochar.

ROMANIAN PERSPECTIVE ON CUSTOMER LOYALTY FOR DIRECT SELLING COMPANIES

Directory of Open Access Journals (Sweden)

Claudia BOBALCA

2014-09-01

Full Text Available The purpose of the research is to investigate Romanian direct sellers’ perceptions on customers’ loyalty. The research objectives are: (1 to identify the direct sellers’ perceptions on the concept of loyalty; (2 to identify the main loyalty techniques that direct sellers use in their work with the clients; (3 to frame the portrait of a loyal customer. As a research method, we used qualitative research based on depth interviews. It is an exploratory and instrumental research, the results being used for building a questionnaire for a future survey. The investigated population is represented by direct selling women, with ages beteeen 19 and 30 years. For direct sellers, loyalty is an attitude and also a behavior, it means buying from the same company, from the same seller and preferring the products of the company. The main loyalty techniques that direct sellers use in their work with the clients are: promotional actions, personalization the relation with the client and offering stimulants. The loyal customer is the one who buys companies’ products every month or at least quarterly, spends a monthly amount of 100 Ron on these products, works with the same seller, pays on time for the order, doesn’t look only after promotions, loves the products, recommends the company to others, doesn’t return the order, wants to buy more products from the company and trusts its products.

One Improvement Method of Reducing Duration Directly to Solve Time-Cost Tradeoff Problem

Science.gov (United States)

Jian-xun, Qi; Dedong, Sun

Time and cost are two of the most important factors for project plan and schedule management, and specially, time-cost tradeoff problem is one classical problem in project scheduling, which is also a difficult problem. Methods of solving the problem mainly contain method of network flow and method of mending the minimal cost. Thereinto, for the method of mending the minimal cost is intuitionistic, convenient and lesser computation, these advantages make the method being used widely in practice. But disadvantage of the method is that the result of each step is optimal but the terminal result maybe not optimal. In this paper, firstly, method of confirming the maximal effective quantity of reducing duration is designed; secondly, on the basis of above method and the method of mending the minimal cost, the main method of reducing duration directly is designed to solve time-cost tradeoff problem, and by analyzing validity of the method, the method could obtain more optimal result for the problem.

Growth and N-uptake in sorghum plants manured with different amounts of Leucaena Leucocephala shoots as affected by time of application

International Nuclear Information System (INIS)

Kurdali, F.; Al-Shamma'a, M.

2006-08-01

A pot experiment was conducted throughout two successive years to determine the impact of adding four rates of nitrogen (0, 60, 120 and 180 kg N/ha) in the form of Leucaena leucocephala (lam.) de Wit green manure as affected by different time (T0, T15 and T30) of application (just before sowing, 15 and 30 days before sowing, respectively) on the performance of sorghum (Sorghum bicolor L.) using the indirect N-15 isotopic dilution technique. Results showed that leucaena leaves, used as a green manure, significantly increased dry matter production and N yield of sorghum. The effect was more pronounced in panicles than shoots. In the first year, N recoveries in sorghum of the total N contained in leucaena green manure ranged between 17-24% in T0, 14-24% in T15 and 15-19% in T30. The highest N recovery value was obtained in lowest rate of n treatment (N 60 ). Moreover, soil incorporated with leucaena green manure one month before planting enhanced both soil and mineral N fertilizer in sorghum plants. In the second year, total N uptake in sorghum (eg., panicles and the entire plant) increased with increasing amounts of N added as a leucaena green manure. N recoveries in sorghum ranged between 26-47% in T0, about 24% in T15 and 23-325 in T30 of the total N contained in leucaena green manure (LGM). As shown in the first year, the highest value of N recovery was obtained in lowest rate of N treatment. The beneficial effects of leucaena green manure on dry matter and N yield in sorghum was attributed not only to the additional N availability to the plant, but also to effects on the enhancement of soil N uptake, particularly when the incorporation was made before a sufficient time from sowing. The beneficial effect of green manuring with leucaena leaves at T15 and T30 was mainly resulted from enhancement of N uptake from this added material, as well as from soil and fertilizer N; whereas, it was only attributed to N uptake from green manure in the T0 treatment. Incorporation

Growth and N-uptake in sorghum plants manured with different amounts of Leucaena Leucocephala shoots as affected by time of application

International Nuclear Information System (INIS)

Kurdali, F.; Al-Shamma'a, M.

2007-01-01

A pot experiment was conducted throughout two successive years to determine the impact of adding four rates of nitrogen (0, 60, 120 and 180 kg N/ha) in the form of Leucaena leucocephala (lam.) de Wit green manure as affected by different time (T0, T15 and T30) of application (just before sowing, 15 and 30 days before sowing, respectively) on the performance of sorghum (Sorghum bicolor L.) using the indirect N-15 isotopic dilution technique. Results showed that leucaena leaves, used as a green manure, significantly increased dry matter production and N yield of sorghum. The effect was more pronounced in panicles than shoots. In the first year, N recoveries in sorghum of the total N contained in leucaena green manure ranged between 17-24% in T0, 14-24% in T15 and 15-19% in T30. The highest N recovery value was obtained in lowest rate of n treatment (N60). Moreover, soil incorporated with leucaena green manure one month before planting enhanced both soil and mineral N fertilizer in sorghum plants. In the second year, total N uptake in sorghum (eg., panicles and the entire plant) increased with increasing amounts of N added as a leucaena green manure. N recoveries in sorghum ranged between 26-47% in T0, about 24% in T15 and 23-325 in T30 of the total N contained in leucaena green manure (LGM). As shown in the first year, the highest value of N recovery was obtained in lowest rate of N treatment. The beneficial effects of leucaena green manure on dry matter and N yield in sorghum was attributed not only to the additional N availability to the plant, but also to effects on the enhancement of soil N uptake, particularly when the incorporation was made before a sufficient time from sowing. The beneficial effect of green manuring with leucaena leaves at T15 and T30 was mainly resulted from enhancement of N uptake from this added material, as well as from soil and fertilizer N. Whereas, it was only attributed to N uptake from green manure in the T0 treatment. Incorporation

How many or how much? Testing the relative influence of the number of social network risks versus the amount of time exposed to social network risks on post-treatment substance use.

Science.gov (United States)

Eddie, David; Kelly, John F

2017-06-01

Having high-risk, substance-using friends is associated with young adult substance use disorder (SUD) relapse. It is unclear, however, whether it is the total number of high-risk friends, or the amount of time spent with high-risk friends that leads to relapse. Unclear also, is to what extent low-risk friends buffer risk. This study examined the influence of number of high-risk and low-risk friends, and the amount time spent with these friends on post-treatment percent days abstinent (PDA). Young adult inpatients (N=302) were assessed at intake, and 3, 6, and 12 months on social network measures and PDA. Mixed models tested for effects of number of high- and low-risk friends, and time spent with these friends on PDA, and for net-risk friend effects to test whether low-risk friends offset risk. Within and across assessments, number of, and time spent with high-risk friends was negatively associated with PDA, while the inverse was true for low-risk friends. Early post-treatment, time spent with friends more strongly predicted PDA than number of friends. Participants were more deleteriously affected by time with high-risk friends the longer they were out of treatment, while contemporaneously protection conferred by low-risk friends increased. This interaction effect, however, was not observed with number of high- or low-risk friends, or number of friends net-risk. Young adult SUD patients struggling to break ties with high-risk friends should be encouraged to minimize time with them. Clinicians should also encourage patients to grow their social network of low-risk friends. Copyright © 2017 Elsevier B.V. All rights reserved.

Foreign Remittances, Foreign Direct Investment, Foreign Imports and Economic Growth in Pakistan: A Time Series Analysis

Directory of Open Access Journals (Sweden)

Muhammad Tahir

2015-10-01

Full Text Available This empirical research paper focuses on establishing a relationship between external determinants and economic growth of Pakistan economy. Empirical analyses are carried out with time series econometric techniques using data over the period of 1977-2013. The main finding is that external determinants such as foreign remittances, foreign direct investment, and foreign imports matter from a growth perspective. Foreign remittances and foreign direct investment have a significant positive role in the growth process of Pakistan economy. Furthermore, it is found that foreign imports have adversely influenced the economic growth of Pakistan. The study recommends that policy makers shall take appropriate steps to increase the inflow of both foreign remittances and foreign direct investment in order to achieve the long run economic growth.

Direct Observation of Heavy-Tailed Storage Times of Bed Load Tracer Particles Causing Anomalous Superdiffusion

Science.gov (United States)

Bradley, D. Nathan

2017-12-01

A consensus has formed that the step length distribution of fluvial bed load is thin tailed and that the observed anomalous superdiffusion of bed load tracer particles must arise from heavy-tailed resting times. However, heavy-tailed resting times have never been directly observed in the field over multiple floods. Using 9 years of data from a large bed load tracer experiment, I show that the spatial variance of the tracer plume scales faster than linearly with integrated excess stream power, indicating anomalous superdiffusion. The superdiffusion is caused by a heavy-tailed distribution of observed storage times that is fit with a truncated Pareto distribution with a tail parameter that is predicted by anomalous diffusion theory. The heavy-tailed distribution of storage times causes the tracer virtual velocity to slow over time, indicated by a sublinear increase in the mean displacement that is predicted by the storage time distribution tail parameter.

Sorption of trace amounts of 67Ga and 65Zn on some divalent and trivalent metal hydroxides

International Nuclear Information System (INIS)

Music, S.; Sipalo-Zuljevic, J.; Vlatkovic, M.

1977-01-01

Trace concentrations of 67 Ga and 65 Zn were applied to the radiochemical study of sorption using Al(III), Cr(III), Fe(III), In(III), La(III), Zn(II), Cu(II) and Ni(II) hydroxides as sorbents. The results are given in terms of percentages sorbed, depending on solution pH or on the time of contact between the heterofeneous phases. The percentage sorbed is strongly pH-dependent. Sorption curves for 67 Ga show the maximum sorption (about 100%) starting from the pH values at the onset of the sorbent precipitation and ending with their approximate isoelectric point. Further increase in pH leads to a sudden decrease of the amounts sorbed. The sorption of 65 Zn is also pH-dependent; the decrease of sorption proceeds from right-to-left on the pH scale, i.e. in reverse direction if compared with gallium. The results are explained in terms of coprecipitation, electrostatic attraction (repulsion) and Van der Waals induced dipole attraction. Some sorption results, concerning the contact time dependence of the sorption are discussed in terms of specific sorption controlled by the diffusion of sorbate into the solid sorbent. (author)

Thermogravimetric Analysis (TGA) Profile of Modified Sba-15 at Different Amount of Alkoxy silane Group

International Nuclear Information System (INIS)

Norhasyimi Rahmat; Nur Fathilah Mohd Yusof; Ezani Hafiza

2014-01-01

This study focused on meso porous silica SBA-15 modified with alkoxy silane functional group; phenyltriethoxysilane (PTES) and vinyltriethoxysilane (VTES) using direct synthesis and post-grafting methods. By direct synthesis method, SBA-15 template by triblock copolymer (P123) and functionalized with alkoxy silane groups at different amount of loadings were co-condensed with tetraethyl orthosilicate (TEOS) under acidic conditions. As for post-grafting method, different loadings of alkoxy silane groups were added after co-condensation of TEOS with P123 template. Both synthesis methods used calcination process to remove surfactant template at 550 degree Celsius for 5 hours. The derivatized SBA-15 was characterized by thermogravimetric analysis to evaluate the profile at different loadings of alkoxy silane groups with different synthesis method. At temperature range of 300-800 degree Celsius, post-grafting method displayed the highest weight loss of phenyl and vinyl groups. However, there was no significant difference of weight loss for different amount of organo silane groups. In this study, TGA has shown to be significant characterization means to determine the effects of different method used in synthesizing modified SBA-15. It was shown that different loading of phenyl and vinyl groups did not affect the efficiency of surfactant removal. (author)

12 CFR 209.4 - Amounts and payments.

Science.gov (United States)

2010-01-01

... CANCELLATION OF FEDERAL RESERVE BANK CAPITAL STOCK (REGULATION I) § 209.4 Amounts and payments. (a) Amount of... lesser of 15 percent or 100 shares of its Reserve Bank capital stock, it shall file with the appropriate Reserve Bank an application for issue or cancellation of Reserve Bank capital stock in order to adjust its...

Real-time motion analysis reveals cell directionality as an indicator of breast cancer progression.

Directory of Open Access Journals (Sweden)

Michael C Weiger

Full Text Available Cancer cells alter their migratory properties during tumor progression to invade surrounding tissues and metastasize to distant sites. However, it remains unclear how migratory behaviors differ between tumor cells of different malignancy and whether these migratory behaviors can be utilized to assess the malignant potential of tumor cells. Here, we analyzed the migratory behaviors of cell lines representing different stages of breast cancer progression using conventional migration assays or time-lapse imaging and particle image velocimetry (PIV to capture migration dynamics. We find that the number of migrating cells in transwell assays, and the distance and speed of migration in unconstrained 2D assays, show no correlation with malignant potential. However, the directionality of cell motion during 2D migration nicely distinguishes benign and tumorigenic cell lines, with tumorigenic cell lines harboring less directed, more random motion. Furthermore, the migratory behaviors of epithelial sheets observed under basal conditions and in response to stimulation with epidermal growth factor (EGF or lysophosphatitic acid (LPA are distinct for each cell line with regard to cell speed, directionality, and spatiotemporal motion patterns. Surprisingly, treatment with LPA promotes a more cohesive, directional sheet movement in lung colony forming MCF10CA1a cells compared to basal conditions or EGF stimulation, implying that the LPA signaling pathway may alter the invasive potential of MCF10CA1a cells. Together, our findings identify cell directionality as a promising indicator for assessing the tumorigenic potential of breast cancer cell lines and show that LPA induces more cohesive motility in a subset of metastatic breast cancer cells.

Application of the linear-quadratic model with incomplete repair to radionuclide directed therapy

International Nuclear Information System (INIS)

Millar, W.T.; Glasgow Univ.

1991-01-01

The LQ model has now been extended to include a general time varying dose rate profile, and the equations can be readily evaluated if an exponential radiation damage repair process is assumed. These equations are applicable to radionuclide directed therapy, including brachytherapy. Kinetic uptake data obtained during radionuclide directed therapy may therefore be used to determine the radiobiological dosimetry of the target and non-target tissues. Also, preliminary tracer studies may be used to pre-plan the radionuclide directed therapy, provided that tracer and therapeutic amounts of the radionuclide carrier are identically processed by the tissues. It is also shown that continuous radionuclide therapy will induce less damage in late-responding tissues than 2 Gy/fraction external beam therapy if the ratio of the maximum dose rate and the sublethal damage repair half-life in the tissue is less than 1.0 Gy. Similar inequalities may be derived for β-particle radionuclide directed therapy. (author)

Efficacy of ethanol-based hand foams using clinically relevant amounts: a cross-over controlled study among healthy volunteers

Directory of Open Access Journals (Sweden)

Marschall Sigunde

2010-03-01

Full Text Available Abstract Background Foams containing 62% ethanol are used for hand decontamination in many countries. A long drying time may reduce the compliance of healthcare workers in applying the recommended amount of foam. Therefore, we have investigated the correlation between the applied amount and drying time, and the bactericidal efficacy of ethanol foams. Methods In a first part of tests, four foams (Alcare plus, Avagard Foam, Bode test foam, Purell Instant Hand Sanitizer containing 62% ethanol, which is commonly used in U.S. hospitals, were applied to 14 volunteers in a total of seven variations, to measure drying times. In a second part of tests, the efficacy of the established amount of foam for a 30 s application time of two foams (Alcare plus, Purell Instant Hand Sanitizer and water was compared to the EN 1500 standard of 2 × 3 mL applications of 2-propanol 60% (v/v, on hands artificially contaminated with Escherichia coli. Each application used a cross-over design against the reference alcohol with 15 volunteers. Results The mean weight of the applied foam varied between 1.78 and 3.09 g, and the mean duration to dryness was between 37 s and 103 s. The correlation between the amount of foam applied and time until hands felt dry was highly significant (p 10-reduction: 3.05 ± 0.45 and Alcare plus (3.58 ± 0.71 was significantly less effective than the reference disinfection (4.83 ± 0.89 and 4.60 ± 0.59, respectively; p 10-reduction of 2.39 ± 0.57. Conclusions When using 62% ethanol foams, the time required for dryness often exceeds the recommended 30 s. Therefore, only a small volume is likely to be applied in clinical practice. Small amounts, however, failed to meet the efficacy requirements of EN 1500 and were only somewhat more effective than water.

Direct look from a predator shortens the risk-assessment time by prey.

Directory of Open Access Journals (Sweden)

Sang-im Lee

Full Text Available Decision making process is an important component of information use by animals and has already been studied in natural situations. Decision making takes time, which is expressed as a cost in evolutionary explanations of decision making abilities of animals. However, the duration of information assessment and decision making process has not been measured in a natural situation. Here, we use responses of wild magpies (Pica pica to predictably approaching humans to demonstrate that, regardless of whether the bird perceived high (decided to fly away or low (resumed foraging threat level, the bird assessed the situation faster when approaching humans looked directly at it than when the humans were not directly looking at it. This indicates that prey is able to extract more information about the predator's intentions and to respond sooner when the predator is continuously ("intently" looking at the prey. The results generally illustrate how an increase of information available to an individual leads to a shorter assessment and decision making process, confirming one of central tenets of psychology of information use in a wild bird species in its natural habitat.

Extended Fitts' model of pointing time in eye-gaze input system - Incorporating effects of target shape and movement direction into modeling.

Science.gov (United States)

Murata, Atsuo; Fukunaga, Daichi

2018-04-01

This study attempted to investigate the effects of the target shape and the movement direction on the pointing time using an eye-gaze input system and extend Fitts' model so that these factors are incorporated into the model and the predictive power of Fitts' model is enhanced. The target shape, the target size, the movement distance, and the direction of target presentation were set as within-subject experimental variables. The target shape included: a circle, and rectangles with an aspect ratio of 1:1, 1:2, 1:3, and 1:4. The movement direction included eight directions: upper, lower, left, right, upper left, upper right, lower left, and lower right. On the basis of the data for identifying the effects of the target shape and the movement direction on the pointing time, an attempt was made to develop a generalized and extended Fitts' model that took into account the movement direction and the target shape. As a result, the generalized and extended model was found to fit better to the experimental data, and be more effective for predicting the pointing time for a variety of human-computer interaction (HCI) task using an eye-gaze input system. Copyright © 2017. Published by Elsevier Ltd.

Relation between the amount of dissolved water and metals dissolved from stainless steel or aluminum plate in safflower oil

Energy Technology Data Exchange (ETDEWEB)

Takasago, Masahisa; Takaoka, Kyo

1986-12-01

The amount of water dissolved in safflower oil at the frying temperature (180 deg C) was 518 -- 1012 ppM, allowing water to drop continuously (0.035 g/2 min) into the oil for 1 -- 3 h. When the oil was heated with metal plates under the same conditions, the amount of dissolved water in the oil increased more than in the absence of the metal plates. In case of stainless steel, the amount was 1.26 to 1.33 times, and with aluminum plates, 1.06 to 1.13 times the amount without plates. When these metal plates were heated with the oil under the above conditions, the water dissolved the metal of the plates into the oil. In case of stainless steel, iron dissolved from 0.17 to 0.77 ppM, nickel, 0.04 ppM and chromium, from 0.02 to 0.03 ppM. Similarly, the amount of aluminum dissolved from the aluminum plate was from 0.10 to 0.45 ppM.

Nuclear operator. Liability amounts and financial security limits

International Nuclear Information System (INIS)

2015-07-01

This paper gives, for numerous countries involved (or would be involved) in nuclear activities, financial information on the liability amount imposed on the operator, the amounts provided from public funds beyond the Operator's Liability Amount, to be made available by the State in whose territory the nuclear installation of the liable operator is situated, and the public funds contributed jointly by all the States parties to the BSC or CSC according to a pre-determined formula

The relation between the amount of dissolved water and metals dissolved from stainless steel or aluminum plate in safflower oil

International Nuclear Information System (INIS)

Takasago, Masahisa; Takaoka, Kyo

1986-01-01

The amount of water dissolved in safflower oil at the frying temperature (180 deg C) was 518 ∼ 1012 ppm, allowing water to drop continuously (0.035 g/2 min) into the oil for 1 ∼ 3 h. When the oil was heated with metal plates under the same conditions, the amount of dissolved water in the oil increased more than in the absence of the metal plates. In case of stainless steel, the amount was 1.26 to 1.33 times, and with aluminum plates, 1.06 to 1.13 times the amount without plates. When these metal plates were heated with the oil under the above conditions, the water dissolved the metal of the plates into the oil. In case of stainless steel, iron dissolved from 0.17 to 0.77 ppm, nickel, 0.04 ppm and chromium, from 0.02 to 0.03 ppm. Similarly, the amount of aluminum dissolved from the aluminum plate was from 0.10 to 0.45 ppm. (author)

Effects of different amounts of exercise on preventing depressive symptoms in community-dwelling older adults: a prospective cohort study in Taiwan.

Science.gov (United States)

Chang, Yu-Chen; Lu, Mei-Chun; Hu, I-Han; Wu, Wan-Chi Ida; Hu, Susan C

2017-05-02

To compare the effects of four different amounts of exercise for preventing depressive symptoms in community-dwelling older adults. Prospective cohort study. A nationally representative sample in Taiwan. Four waves of the survey 'Taiwan Longitudinal Study on Aging (TLSA)' from 1996 to 2007 were analysed. A total of 2673 older adults aged 65 years and over were recruited. Depressive symptoms were measured using the Center for Epidemiologic Studies Depression Scale (CESD). Four different types/amounts of exercise were examined including: (1) 3 times/week, 15 min/time; (2) 3 times/week, 30 min/time; (3) 6 times/week, 15 min/time; and (4) 6 times/week, 30 min/time. All exercise types were required to have at least moderate intensity. The impacts of different amounts of exercise on depressive symptoms were analysed using generalised linear mixed models. More than one-fifth of the elder individuals under consideration had depressive symptoms (CESD ≥10). About 38.6% of older adults met the lowest criteria for exercise type 1, and fewer (28.0%) met the highest criteria for type 4. Only exercise type 4 in the current survey was initially related to lower depressive symptoms (OR=0.8, 95% CI 0.66 to 0.95). However, after considering the interaction between time and changes in exercise patterns, the results showed that all persistent exercise models, even if a very low amount (3 times/week, 15 min/time), had significantly preventive effects on depressive symptoms (OR=0.56~0.67). Consistent exercise with at least 15 min per time, three times a week of moderate intensity is significantly associated with lower risk of depressive symptoms. This low amount of exercise may be easier to promote at the community and population level than other alternatives. Registry number 104040 of the Institutional Ethics Committee of Chia-Yi Christian Hospital. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No

Small Business Administration (SBA) Loan Program Performance- Charge Off Rates as a Percent of Unpaid Principal Balance (UPB) Amount by Program

Data.gov (United States)

Small Business Administration — Reflects charge off rates, as a percent of the UPB amounts, at the end of the fiscal year for the major loan programs and aggregate totals for the small direct and...

Unit-time scheduling problems with time dependent resources

NARCIS (Netherlands)

Tautenhahn, T.; Woeginger, G.

1997-01-01

We investigate the computational complexity of scheduling problems, where the operations consume certain amounts of renewable resources which are available in time-dependent quantities. In particular, we consider unit-time open shop problems and unit-time scheduling problems with identical parallel

Increase in the amount of erythrocyte delta-aminolevulinic acid dehydratase in workers with moderate lead exposure

International Nuclear Information System (INIS)

Fujita, H.; Sano, S.

1982-01-01

The amount of ALA-D in human erythrocytes was determined directly by radioimmunoassay or calculated from the restored activity assayed in the presence of zinc and dithiothreitol, and a good correlation was observed between the RIA-based and the restored activity-based amounts. The RIA-based amount of ALA-D in the blood of 10 normal individuals (blood lead levels of 5.6 +- 2.3 μg/100 ml: mean +- SD) and 19 lead-exposed workers (blood lead levels of 41.2 +- 10.2 μg/100 ml) was 54.1 +- 11.8 μg/ml blood and 92.3 +- 20.6 μg/ml blood, respectively, indicating an apparent increase of the enzyme amount in lead-exposed workers. A significant increase in the amount of erythrocyte ALA-D calculated from the restored activity in lead-exposed workers was observed even in the low blood lead level of 10-20 μg/100 ml, resulting in the range of blood lead level 20-40 μg/100 ml. No significant difference was observed in hematocrit and hemoglobin content between lead-exposed and non-exposed groups. These observations suggested that the increase of erythrocyte ALA-D in lead exposure was not due to anemia, which might result in the increase of young erythrocytes in peripheral blood. This increase in the amount of ALA-D in human erythrocytes might be a result of the function to overcome the inhibition of the enzyme in bone marrow cells during lead exposure, and these findings may throw light on the danger to human health of low-level lead toxicity. (orig.)

46 CFR 308.303 - Amounts insured under interim binder.

Science.gov (United States)

2010-10-01

... 308.303 Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE Second Seamen's War Risk Insurance § 308.303 Amounts insured under interim binder. The amounts insured are the amounts specified in the Second Seamen's War Risk Policy (1955) or as modified by shipping...

Direct and real time probe of photoinduced structure transition in colossal magnetoresistive material

Energy Technology Data Exchange (ETDEWEB)

Li, Junjie [Physics Department, Florida State University, Tallahassee, Florida 32310 (United States); National High Magnetic Field Laboratory, Tallahassee, Florida 32310 (United States); Condensed Matter Physics and Materials Science Department, Brookhaven National Laboratory, Upton, New York 11973 (United States); Wang, Xuan [Institute of physics, Chinese Academy of Sciences, P.O. Box 603, Beijing 100190 (China); Zhou, Haidong [National High Magnetic Field Laboratory, Tallahassee, Florida 32310 (United States); Zhou, Jun; Cao, Jianming, E-mail: jcao@magnet.fsu.edu [Physics Department, Florida State University, Tallahassee, Florida 32310 (United States); National High Magnetic Field Laboratory, Tallahassee, Florida 32310 (United States); Cheng, J. G. [Texas Materials Institute, University of Texas at Austin, Austin, Texas 78712 (United States)

2016-07-25

We report a direct and real time measurement of photoinduced structure phase transition in single crystal La{sub 0.84}Sr{sub 0.16}MnO{sub 3} using femtosecond electron diffraction. The melting of orthorhombic lattice ordering under femtosecond optical excitation is found involving two distinct processes with different time scales, an initial fast melting of orthorhombic phase in about 4 ps and a subsequent slower transformation in 90 ps and longer timescales. The fast process is designated as the initial melting of orthorhombic phase induced by the Mn-O bond change that is most likely driven by the quenching of the dynamic Jahn-Teller distortion following the photo-excitation. The slow process is attributed to the growing of newly formed structure domain from the photo-excited sites to the neighboring non-excited orthorhombic sites.

Determining the success of curbside recycling programs by surveys and direct measurement

Energy Technology Data Exchange (ETDEWEB)

Everett, J.W. [Univ. of Oklahoma, Norman, OK (United States). School of Civil Engineering and Environmental Science; Riley, P.C. [Waste Management of Oklahoma, Inc., Oklahoma City, OK (United States)

1998-12-31

Curbside collection of recyclable material can be expensive because the inherent costs of curbside collection are high, but also because amounts collected per residence are small compared to the total waste stream, and extra time may be required to carry out additional activities, such as sorting. A better understanding of how households participate in curbside recycling programs may help operators reduce costs. In this paper, a survey and direct observation of set-out behavior are used to increase the understanding of a recycling program in the City of the Village, OK. Specifically, the paper addresses: (1) relationships between set-out amount, set-out frequency, and demographics; and (2) respondent awareness of their own recycling behavior and activity on their street. Analysis of set-out amount, set-out frequency, and household size data indicates that, on average, smaller households set out less recyclables overall, but more per person, compared to larger households. As expected, set-out frequency appears to be related to the amount of recyclables set out for collection; houses storing more recyclables per week set them out more often. However, infrequent participants (one set-out in ten weeks) set out less material per week than other participating households, but in larger amounts. On the rare occasions that they set out material, they set out approximately 25 pounds of materials, whereas the average amount set out by other households is less than 15 pounds per set-out. Variability in set-out frequency and amount, not explained by household size or other demographic variables, indicates that other factors are important. There is hope that program operators can influence participants to minimize set-out frequency, thus increasing the efficiency of collection.

Test Plan for Radioactive Testing of a Vertical Direct Denitration Calciner

International Nuclear Information System (INIS)

COMPTON, J.A.

2000-01-01

Stored solutions containing plutonium and nitric acid and possibly uranium thorium and minor amounts of other substances will be used for development and demonstration of a vertical calciner direct denitration process for conversion of those to stable storable PuO 2 rich solids. Some of those solutions are quite dilute and very impure these require either pretreatment to make them suitable for calciner feed or an alternate stabilization method. Untreated scrap solutions containing some amounts of sulfate phosphate sodium and/or potassium may also be tested for suitability of direct denitration for conversion directly to PuO 2 -rich solids. A vertical calciner will be used to demonstrate the direct denitration process for converting plutonium-bearing liquors to stable plutonium-rich solids. The calciner and some of its ancillary equipment were previously tested with non-radioactive chemicals to demonstrate operability

Test Plan for Radioactive Testing of a Vertical Direct Denitration Calciner

International Nuclear Information System (INIS)

COMPTON, J.A.

2000-01-01

Stored solutions containing plutonium and nitric acid and possibly uranium thorium and minor amounts of other substances will be used for development and demonstration of a vertical calciner direct denitration process for conversion of those to stable storable PuO 2 rich solids. Some of those solutions are quite dilute and very impure these require either pretreatment to make them suitable for calciner feed or an alternate stabilization method. Untreated scrap solutions containing some amounts of sulfate phosphate sodium and/or potassium may also be tested for suitability of direct denitration for conversion directly to PuO 2 -rich solids. A vertical calciner will be used to demonstrate the direct denitration process for converting plutonium-bearing liquors to stable plutonium rich solids. The calciner and some of its associated equipment were previously tested with non-radioactive chemicals to demonstrate operability

Test Plan for Radioactive Testing of a Vertical Direct Denitration Calciner

Energy Technology Data Exchange (ETDEWEB)

COMPTON, J.A.

2000-02-03

Stored solutions containing plutonium and nitric acid and possibly uranium thorium and minor amounts of other substances will be used for development and demonstration of a vertical calciner direct denitration process for conversion of those to stable storable PuO{sub 2} rich solids. Some of those solutions are quite dilute and very impure these require either pretreatment to make them suitable for calciner feed or an alternate stabilization method. Untreated scrap solutions containing some amounts of sulfate phosphate sodium and/or potassium may also be tested for suitability of direct denitration for conversion directly to PuO{sub 2}-rich solids. A vertical calciner will be used to demonstrate the direct denitration process for converting plutonium-bearing liquors to stable plutonium-rich solids. The calciner and some of its ancillary equipment were previously tested with non-radioactive chemicals to demonstrate operability.

Test Plan for Radioactive Testing of a Vertical Direct Denitration Calciner

Energy Technology Data Exchange (ETDEWEB)

COMPTON, J.A.

2000-02-03

Stored solutions containing plutonium and nitric acid and possibly uranium thorium and minor amounts of other substances will be used for development and demonstration of a vertical calciner direct denitration process for conversion of those to stable storable PuO{sub 2} rich solids. Some of those solutions are quite dilute and very impure these require either pretreatment to make them suitable for calciner feed or an alternate stabilization method. Untreated scrap solutions containing some amounts of sulfate phosphate sodium and/or potassium may also be tested for suitability of direct denitration for conversion directly to PuO{sub 2}-rich solids. A vertical calciner will be used to demonstrate the direct denitration process for converting plutonium-bearing liquors to stable plutonium rich solids. The calciner and some of its associated equipment were previously tested with non-radioactive chemicals to demonstrate operability.

Analysis of Silicones Released from Household Items and Baby Articles by Direct Analysis in Real Time-Mass Spectrometry

Science.gov (United States)

Gross, Jürgen H.

2015-03-01

Direct analysis in real time-mass spectrometry (DART-MS) enables screening of articles of daily use made of polydimethylsiloxanes (PDMS), commonly known as silicone rubber, to assess their tendency to release low molecular weight silicone oligomers. DART-MS analyses were performed on a Fourier transform ion cyclotron resonance (FT-ICR) mass spectrometer. Flexible silicone baking molds, a watch band, and a dough scraper, as baby articles different brands of pacifiers, nipples, and a teething ring have been examined. While somewhat arbitrarily chosen, the set can be regarded as representative of household items, baby articles, and other objects made of silicone rubber. For comparison, two brands of silicone septa and as blanks a glass slide and a latex pacifier were included. Differences between the objects were mainly observed in terms of molecular weight distribution and occasional release of other compounds in addition to PDMS. Other than that, all objects made of silicone rubber released significant amounts of PDMS during DART analysis. To provide a coarse quantification, a calibration based on silicone oil was established, which delivered PDMS losses from 20 μg to >100 μg during the 16-s period per measurement. Also, the extraction of baking molds in rapeseed oil demonstrated a PDMS release at the level of 1 μg mg-1. These findings indicate a potential health hazard from frequent or long-term use of such items. This work does not intend to blame certain brands of such articles. Nonetheless, a higher level of awareness of this source of daily silicone intake is suggested.

PATTERNS OF THE MAXIMUM RAINFALL AMOUNTS REGISTERED IN 24 HOURS WITHIN THE OLTENIA PLAIN

Directory of Open Access Journals (Sweden)

ALINA VLĂDUŢ

2012-03-01

Full Text Available Patterns of the maximum rainfall amounts registered in 24 hours within the Oltenia Plain. The present study aims at rendering the main features of the maximum rainfall amounts registered in 24 h within the Oltenia Plain. We used 30-year time series (1980-2009 for seven meteorological stations. Generally, the maximum amounts in 24 h display the same pattern as the monthly mean amounts, namely higher values in the interval May-October. In terms of mean values, the highest amounts are registered in the western and northern extremity of the plain. The maximum values generally exceed 70 mm at all meteorological stations: D.T. Severin, 224 mm, July 1999; Slatina, 104.8 mm, August 2002; Caracal, 92.2 m, July 1991; Bechet, 80.8 mm, July 2006; Craiova, 77.6 mm, April 2003. During the cold season, there was noticed a greater uniformity all over the plain, due to the cyclonic origin of rainfalls compared to the warm season, when thermal convection is quite active and it triggers local showers. In order to better emphasize the peculiarities of this parameter, we have calculated the frequency on different value classes (eight classes, as well as the probability of appearance of different amounts. Thus, it resulted that the highest frequency (25-35% is held by the first two classes of values (0-10 mm; 10.1-20 mm. The lowest frequency is registered in case of the amounts of more than 100 mm, which generally display a probability of occurrence of less than 1% and only in the western and eastern extremities of the plain.

Analysis of carbohydrates in Fusarium verticillioides using size-exclusion HPLC – DRI and direct analysis in real time ionization – time-of-flight – mass spectrometry (DART-MS)

Science.gov (United States)

Direct analysis in real time ionization – time-of-flight – mass spectrometry (DART-MS) and size-exclusion HPLC – DRI are used, respectively, to qualitatively and quantitatively determine the carbohydrates extracted from the corn rot fungus Fusarium verticillioides. In situ permethylation in the DART...

You are what you eat: influence of type and amount of food consumed on central dopamine systems and the behavioral effects of direct- and indirect-acting dopamine receptor agonists.

Science.gov (United States)

Baladi, Michelle G; Daws, Lynette C; France, Charles P

2012-07-01

The important role of dopamine (DA) in mediating feeding behavior and the positive reinforcing effects of some drugs is well recognized. Less widely studied is how feeding conditions might impact the sensitivity of drugs acting on DA systems. Food restriction, for example, has often been the focus of aging and longevity studies; however, other studies have demonstrated that mild food restriction markedly increases sensitivity to direct- and indirect-acting DA receptor agonists. Moreover, it is becoming clear that not only the amount of food, but the type of food, is an important factor in modifying the effects of drugs. Given the increased consumption of high fat and sugary foods, studies are exploring how consumption of highly palatable food impacts DA neurochemistry and the effects of drugs acting on these systems. For example, eating high fat chow increases sensitivity to some behavioral effects of direct- as well as indirect-acting DA receptor agonists. A compelling mechanistic possibility is that central DA pathways that mediate the effects of some drugs are regulated by one or more of the endocrine hormones (e.g. insulin) that undergo marked changes during food restriction or after consuming high fat or sugary foods. Although traditionally recognized as an important signaling molecule in regulating energy homeostasis, insulin can also regulate DA neurochemistry. Because direct- and indirect-acting DA receptor drugs are used therapeutically and some are abused, a better understanding of how food intake impacts response to these drugs would likely facilitate improved treatment of clinical disorders and provide information that would be relevant to the causes of vulnerability to abuse drugs. This article is part of a Special Issue entitled 'Central Control of Food Intake'. Copyright © 2012 Elsevier Ltd. All rights reserved.

Petroleomics by Direct Analysis in Real Time-Mass Spectrometry.

Science.gov (United States)

Romão, Wanderson; Tose, Lilian V; Vaz, Boniek G; Sama, Sara G; Lobinski, Ryszard; Giusti, Pierre; Carrier, Hervé; Bouyssiere, Brice

2016-01-01

The analysis of crude oil and its fractions by applying ambient ionization techniques remains underexplored in mass spectrometry (MS). Direct analysis in real time (DART) in the positive-ion mode was coupled to a linear quadrupole ion trap Orbitrap mass spectrometer (LTQ Orbitrap) to analyze crude oil, paraffin samples, and porphyrin standard compounds. The ionization parameters of DART-MS were optimized for crude oil analysis. DART-MS rendered the optimum conditions of the operation using paper as the substrate, T = 400°C, helium as the carrier gas, and a sample concentration ≥6 mg mL(-1). In the crude oils analysis, the DART(+)-Orbitrap mass spectra detected the typical N, NO, and O-containing compounds. In the paraffin samples, oxidized hydrocarbon species (Ox classes, where x = 1-4) with double-bond equivalent of 1-4 were detected, and their structures and connectivity were confirmed by collision-induced dissociation (CID) experiments. DART(+)-MS has identified the porphyrin standard compounds as [M + H](+) ions of m/z 615.2502 and 680.1763, where M = C44H30N4 and C44H28N4OV, respectively, based on the formula assignment and by phenyl losses observed on CID experiments.

Anticipation of direction and time of perturbation modulates the onset latency of trunk muscle responses during sitting perturbations.

Science.gov (United States)

Milosevic, Matija; Shinya, Masahiro; Masani, Kei; Patel, Kramay; McConville, Kristiina M V; Nakazawa, Kimitaka; Popovic, Milos R

2016-02-01

Trunk muscles are responsible for maintaining trunk stability during sitting. However, the effects of anticipation of perturbation on trunk muscle responses are not well understood. The objectives of this study were to identify the responses of trunk muscles to sudden support surface translations and quantify the effects of anticipation of direction and time of perturbation on the trunk neuromuscular responses. Twelve able-bodied individuals participated in the study. Participants were seated on a kneeling chair and support surface translations were applied in the forward and backward directions with and without direction and time of perturbation cues. The trunk started moving on average approximately 40ms after the perturbation. During unanticipated perturbations, average latencies of the trunk muscle contractions were in the range between 103.4 and 117.4ms. When participants anticipated the perturbations, trunk muscle latencies were reduced by 16.8±10.0ms and the time it took the trunk to reach maximum velocity was also reduced, suggesting a biomechanical advantage caused by faster muscle responses. These results suggested that trunk muscles have medium latency responses and use reflexive mechanisms. Moreover, anticipation of perturbation decreased trunk muscles latencies, suggesting that the central nervous system modulated readiness of the trunk based on anticipatory information. Copyright © 2015 Elsevier Ltd. All rights reserved.

Modeling metabolic response to changes of enzyme amount in ...

African Journals Online (AJOL)

Based on the work of Hynne et al. (2001), in an in silico model of glycolysis, Saccharomyces cerevisiae is established by introducing an enzyme amount multiple factor (.) into the kinetic equations. The model is aimed to predict the metabolic response to the change of enzyme amount. With the help of .α, the amounts of ...

29 CFR 4.142 - Contracts in an indefinite amount.

Science.gov (United States)

2010-07-01

... McNamara-O'Hara Service Contract Act Determining Amount of Contract § 4.142 Contracts in an indefinite amount. (a) Every contract subject to this Act which is indefinite in amount is required to contain the....), a case arising under the Walsh-Healey Public Contracts Act. Such a contract, which may be in the...

Direct hospital marketing: an idea whose time has come.

Science.gov (United States)

Dodson, D C; Dotson, M J; Cussimanio, L

1990-01-01

Health care marketing has arrived swiftly and with significant impact upon the hospital scene. From the early days of rejection and suspicion of only a few years ago, it has now taken its place with other hospital management functions. Still, however, hospitals have not yet reached the degree of expertise that exists in other sectors. One of the reasons why hospitals have not fully emerged to the level of marketing expertise as many of their traditional business counterparts is that many of the areas of both the science and art of marketing have not been fully developed. One such area is direct mail marketing. Presented here is an overview of the advantages and functions of hospital direct mail marketing. A variety of examples are given with a more thorough case example being provided by Lee's Summit Community Hospital in Lee's Summit, Missouri. The successful direct mail marketing campaign there should be both an inspiration and a model for success for other hospitals. Space limitations prevent the authors from some of the more exacting details of mail marketing and, of course, successful campaigns do not happen by magic. They take careful planning, strategy, and execution. They also require a coordinated organizational and human effort to be successful. But direct mail marketing does offer a potentially new arena of marketing for most hospitals. The expertise, skill, knowledge, and technology are in place. All that is really needed is the commitment on the part of the hospital leadership.

Homicides with direct and indirect links to the night-time economy.

Science.gov (United States)

Tomsen, Stephen

2018-06-11

Alcohol use and homicide are a wide community concern with particular interest in understanding and preventing attacks (e.g. 'one punch' male on male attacks) in commercial nightlife settings with high levels of collective drinking. There is insufficient knowledge of the long-term patterns in this violence or the relationship between public drinking and flow on violence in other social settings. Alcohol-related homicides were those in which alcohol consumption was a contributing factor. Those also linked to purchase or consumption in locations where alcohol is sold after dark were classified as night-time economy related. The study comprised a first-hand analysis of files in the archive of the Australian National Homicide Monitoring Program in 2 years with a decade gap (1998/1999-2007/2008), and it classified 73 of all 238 alcohol-related incidents by direct or indirect relation to public nightlife settings. Related homicides in these years were not highly concentrated in developed night-time economies, but more spread outside major nightlife zones. Indirectly related killings were even more dispersed and included more women victims killed in domestic settings. There is a consistent though dispersed relationship between heavy public drinking at night and homicide. Concerns about homicide and night-time drinking leisure with mostly male victims attacked in well-known areas of busy city nightlife, must also consider the broader gendered patterns of 'flow on' nightlife-related incidents, including fatal semi-private and domestic violence that is indirectly but importantly related to drinking and alcohol purchase in public commercial nightlife. © 2018 Australasian Professional Society on Alcohol and other Drugs.

Selective Flow-Injection Quantification of Ultra-trace Amounts of Cr(VI) via On-line Complexation and Preconcentration with APDC Followed by Determination by Electrothermal Atomic Absorption Spectrometry

DEFF Research Database (Denmark)

Nielsen, Steffen; Hansen, Elo Harald

1998-01-01

A rapid, sensitive and selective time-based flow injection (FI) preconcentration procedure is described for the determination of ultra-trace amounts of Cr(VI) via on-line reaction with ammonium pyrrolidine dithiocarbamate (APDC) and formation of the Cr(VI)-PDC complex. The preconcentration...... to direct introduction of 55 mu l samples, yielding a detection limit (3 sigma) of 4.2 ng l(-1). The sample frequency was 21.2 samples per hour. The proposed method was evaluated by analyzing drinking water, a NIST Cr(VI)-reference material and synthetic sea water. A major contribution to successful...

Deregulation of obesity-relevant genes is associated with progression in BMI and the amount of adipose tissue in pigs

DEFF Research Database (Denmark)

Mentzel, Caroline M. Junker; Cardoso, Tainã Figueiredo; Pipper, Christian Bressen

2018-01-01

The aim of this study was to elucidate the relative impact of three phenotypes often used to characterize obesity on perturbation of molecular pathways involved in obesity. The three obesity-related phenotypes are (1) body mass index (BMI), (2) amount of subcutaneous adipose tissue (SATa), and (3......) amount of retroperitoneal adipose tissue (RPATa). Although it is generally accepted that increasing amount of RPATa is ‘unhealthy’, a direct comparison of the relative impact of the three obesity-related phenotypes on gene expression has, to our knowledge, not been performed previously. We have used...... multiple linear models to analyze altered gene expression of selected obesity-related genes in tissues collected from 19 female pigs phenotypically characterized with respect to the obesity-related phenotypes. Gene expression was assessed by high-throughput qPCR in RNA from liver, skeletal muscle...

Fiber-reinforced concretes with a high fiber volume fraction — a look in future. Can a design determine the fiber amount in concrete in real time in every part of a structure in production?

Science.gov (United States)

Tepfers, R.

2010-09-01

In near future, when the control of the load-bearing capacity of fiber-only-reinforced concrete members will be safely guaranteed, the deletion of the ordinary continuous steel reinforcing bars might be possible. For the time being, it is difficult to change the fiber amount during the casting with today's techniques. Therefore, the fiber concentration has to be determined by the maximum tensile stress in concrete structural members, resulting in an unnecessary fiber addition in compressed zones. However, if the right amount of fibers could be regulated and added to concrete in real time at the pump outlet, a future vision could be to design and produce a structure by using FEM-controlled equipment. The signals from calculation results could be transmitted to a concrete casting system for addition of a necessary amount of fibers to take care of the actual tensile stresses in the right position in the structure. The casting location could be determined by using a GPS for positioning the pump outlet for targeting the casting location horizontally and a laser vertically. The addition of fibers to concrete at the outlet of a concrete pump and proportioning them there according to the actual needs of the stress situation in a structure, given by a FEM analysis in real time, is a future challenge. The FEM analysis has to be based on material properties of fiber-only-reinforced concrete. This means that the resistance and stiffness of different-strength concrete members with a varying fiber content has to be determined in tests and conveyed to the FEM analysis. The FEM analysis has to be completed before the casting and controlled. Then it can be used as the base for adding a correct amount of fibers to concrete in every part of the structure. Thus, a system for introducing a correct amount of fibers into concrete has to be developed. The fibers have to be added at the outlet of concrete pump. Maybe a system to shotcrete concrete with electronically controlled fiber

Direct Analysis in Real Time Mass Spectrometry of Potential By-Products from Homemade Nitrate Ester Explosive Synthesis

OpenAIRE

Sisco, Edward; Forbes, Thomas P.

2015-01-01

This work demonstrates the coupling of direct analysis in real time (DART) ionization with time-of-flight mass spectrometry (MS) in an off-axis configuration for the trace detection and analysis of potential partially nitrated and dimerized by-products of homemade nitrate ester explosive synthesis. Five compounds relating to the synthesis of nitroglycerin (NG) and pentaerythritol tetranitrate (PETN) were examined. Deprotonated ions and adducts with molecular oxygen, nitrite, and nitrate were ...

A novel dosimeter for measuring the amount of radiation exposure of surgeons during percutaneous nephrolithotomy: Instadose?

OpenAIRE

Yuruk, Emrah; Gureser, Gokhan; Tuken, Murat; Ertas, Kasim; Serefoglu, Ege Can

2016-01-01

Introduction The aim of this study was to demonstrate the efficacy of Instadose?, a novel dosimeter designed for radiation workers to provide a measurement of the radiation dose at any time from any computer; to determine the amount of radiation exposure during percutaneous nephrolithotomy (PNL); and to evaluate the factors that affect the amount of radiation exposed. Material and methods Two experienced surgeons wore Instadose? on the outer part of their lead aprons during the PNL procedures...

Experimentally achieving borehole antenna radar directivity in the time domain in the presence of strong mutual coupling

CSIR Research Space (South Africa)

Vogt, D

2008-06-01

Full Text Available published borehole radar antennas have achieved directivity by post processing data received in the frequency domain, or by constructing an aperture antenna, where borehole dimensions allowed this. In this paper, a time-domain technique is investigated...

Different amounts of protest in 4-month-old infants of depressed vs. non-depressed mothers

DEFF Research Database (Denmark)

Gufler, Sandra Rejnholdt; Smith-Nielsen, Johanne; Væver, Mette Skovgaard

Amount of vocal protest was measured in 4-month-old infants of depressed vs. non-depressed mothers during 10 minute face-to-face interaction. The sample consisted of two groups of mothers with their infants: depressed (n=17) and non-depressed (n=49), in total N=66. Vocal protest was measured using...... PRAAT phonetic software and manual, reliable coding. Results showed that infants of depressed mothers expressed a lower amount of vocal protest compared to infants of non-depressed mothers as measured in mean percentage of time (p

Knowledge discovery: Extracting usable information from large amounts of data

International Nuclear Information System (INIS)

Whiteson, R.

1998-01-01

The threat of nuclear weapons proliferation is a problem of world wide concern. Safeguards are the key to nuclear nonproliferation and data is the key to safeguards. The safeguards community has access to a huge and steadily growing volume of data. The advantages of this data rich environment are obvious, there is a great deal of information which can be utilized. The challenge is to effectively apply proven and developing technologies to find and extract usable information from that data. That information must then be assessed and evaluated to produce the knowledge needed for crucial decision making. Efficient and effective analysis of safeguards data will depend on utilizing technologies to interpret the large, heterogeneous data sets that are available from diverse sources. With an order-of-magnitude increase in the amount of data from a wide variety of technical, textual, and historical sources there is a vital need to apply advanced computer technologies to support all-source analysis. There are techniques of data warehousing, data mining, and data analysis that can provide analysts with tools that will expedite their extracting useable information from the huge amounts of data to which they have access. Computerized tools can aid analysts by integrating heterogeneous data, evaluating diverse data streams, automating retrieval of database information, prioritizing inputs, reconciling conflicting data, doing preliminary interpretations, discovering patterns or trends in data, and automating some of the simpler prescreening tasks that are time consuming and tedious. Thus knowledge discovery technologies can provide a foundation of support for the analyst. Rather than spending time sifting through often irrelevant information, analysts could use their specialized skills in a focused, productive fashion. This would allow them to make their analytical judgments with more confidence and spend more of their time doing what they do best

EXAMINATION OF FACTORS INFLUENCING THE VARIABILITY OF YEAST AMOUNT IN THE CONTEXT OF PH CHANGES IN BOTTLED WINES

Directory of Open Access Journals (Sweden)

Ladislav Mura

2011-07-01

Full Text Available Aim of this paper was to examine of factors (manufacturer, temperature and storage time influencing the variability of yeast amount and pH changes in bottled white wines. It was confirmed that wine coming from the business network was better quality in contract to domestic wine. We have assumed that domestic wine was contaminated during the manufacturing process, while the most probable reason was imperfect filtration of wine, or its contamination during the bottling. The results showed that the way of storage wine in the room, resp. cooler temperature did not significant effect on changes in the amount of yeast (p-hodnota=0.2080. Regarding the period of storage of wine, the conclusions are identical to the previous factor, ie. storage time not significantly impacted amount of yeast in wine (p-value=0.5507. doi:10.5219/151 

Trace amount analysis using spark mass spectrometry

International Nuclear Information System (INIS)

Stefani, Rene

1975-01-01

Characteristics of spark mass spectrometers (ion source, properties of the ion beam, ion optics, and performance) and their use in qualitative and quantitative analysis are described. This technique is very interesting for the semi-quantitative analysis of trace amounts, down to 10 -8 atoms. Examples of applications such as the analysis of high purity materials and non-conducting mineral samples, and determination of carbon and gas trace amounts are presented. (50 references) [fr

Impact of the European Working Time Directive (EWTD) on the operative experience of surgery residents.

Science.gov (United States)

Hopmans, Cornelis J; den Hoed, Pieter T; van der Laan, Lijckle; van der Harst, Erwin; van der Elst, Maarten; Mannaerts, Guido H H; Dawson, Imro; Timman, Reinier; Wijnhoven, Bas P L; IJzermans, Jan N M

2015-04-01

In Europe and the United States, work hour restrictions are considered to be particularly burdensome for residents in surgery specialties. The aim of this study was to examine whether reduction of the work week to 48 hours resulting from the implementation of the European Working Time Directive has affected the operative experience of surgery residents. This study was conducted in a general surgery training region in the Netherlands, consisting of 1 university hospital and 6 district training hospitals. Operating records summarizing the surgical procedures performed as "primary surgeon" in the operating theater for different grades of surgeons were retrospectively analyzed for the period 2005-2012 by the use of linear regression models. Operative procedures performed by residents were considered the main outcome measure. In total, 235,357 operative procedures were performed, including 47,458 (20.2%) in the university hospital and 187,899 (79.8%) in the district training hospitals (n = 5). For residents in the university hospital, the mean number of operative procedures performed per 1.0 full-time equivalent increased from 128 operations in 2005 to 204 operations in 2012 (P = .001), whereas for residents in district training hospitals, no substantial differences were found over time. The mean (±SD) operative caseload of 64 residents who completed the 6-year training program between 2005 and 2012 was 1,391 ± 226 (range, 768-1856). A comparison of the operative caseload according to year of board-certification showed no difference. Implementation of the European Working Time Directive has not affected adversely the number of surgical procedures performed by residents within a general surgical training region in the Netherlands. Copyright © 2015 Elsevier Inc. All rights reserved.

28 CFR 70.73 - Collection of amounts due.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Collection of amounts due. 70.73 Section 70.73 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) UNIFORM ADMINISTRATIVE REQUIREMENTS... OTHER NON-PROFIT ORGANIZATIONS After-the-Award Requirements § 70.73 Collection of amounts due. (a) Any...

Soft ionization of saturated hydrocarbons, alcohols and nonpolar compounds by negative-ion direct analysis in real-time mass spectrometry.

Science.gov (United States)

Cody, Robert B; Dane, A John

2013-03-01

Large polarizable n-alkanes (approximately C18 and larger), alcohols, and other nonpolar compounds can be detected as negative ions when sample solutions are injected directly into the sampling orifice of the atmospheric pressure interface of the time-of-flight mass spectrometer with the direct analysis in real time (DART) ion source operating in negative-ion mode. The mass spectra are dominated by peaks corresponding to [M + O2]‾(•). No fragmentation is observed, making this a very soft ionization technique for samples that are otherwise difficult to analyze by DART. Detection limits for cholesterol were determined to be in the low nanogram range.

A simple and fast determination of microgram thorium in organic solution containing several hundreds times amount of uranium

International Nuclear Information System (INIS)

Yin Duanzhi; Cao Benhong; Yang Jinfeng

1991-01-01

Using spectrophotometric method, microgram thorium in 30% TBP-kerosene system containing large amount of uranium was successfully determined after one-step back-extraction with hydrochloric acid. The recovery of thorium is more than 98%, and the separation factor α U/Th is over 1 x 10 3 . Being reliable, simple and fast, the recommended method has been used in the research on spent fuel reprocessing and is expected applicable to other neutral phosphate extraction systems such as TOPO and DMHMP

13 CFR 120.930 - Amount.

Science.gov (United States)

2010-01-01

... percent of total Project cost plus 100 percent of eligible administrative costs. For good cause shown, SBA... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Amount. 120.930 Section 120.930 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS LOANS Development Company Loan...

Evaluation of the foetal time to death in mice after application of direct and indirect euthanasia methods.

Science.gov (United States)

Muñoz-Mediavilla, C; Cámara, J A; Salazar, S; Segui, B; Sanguino, D; Mulero, F; de la Cueva, E; Blanco, I

2016-04-01

Directive 2010/63/EU on the protection of animals used for scientific purposes requires that the killing of mammal foetuses during the last third of their gestational period should be accomplished through effective and humane methods. The fact that murine foetuses are resistant to hypoxia-mediated euthanasia renders the current euthanasia methods ineffective or humane for the foetuses when these methods are applied to pregnant female mice. We have assessed the time to death of foetuses after performing either indirect (dam euthanasia) or direct (via intraplacental injection--a new approach to euthanasia) euthanasia methods in order to determine a euthanasia method that is appropriate, ethical and efficient for the killing of mouse foetuses. The respective times to death of foetuses after performing the three most commonly used euthanasia methods (namely cervical dislocation, CO2inhalation and intraperitoneal sodium pentobarbital administration) were recorded. Absence of foetal heartbeat was monitored via ultrasound. We consider that the most effective and humane method of foetal euthanasia was the one able to achieve foetal death within the shortest possible period of time. Among the indirect euthanasia methods assessed, the administration of a sodium pentobarbital overdose to pregnant female mice was found to be the fastest for foetuses, with an average post-treatment foetal death of approximately 29.8 min. As for the direct euthanasia method assessed, foetal time to death after intraplacental injection of sodium pentobarbital was approximately 14 min. Significant differences among the different mouse strains employed were found. Based on the results obtained in our study, we consider that the administration of a sodium pentobarbital overdose by intraplacental injection to be an effective euthanasia method for murine foetuses. © The Author(s) 2015.

Study on the total amount control of atmospheric pollutant based on GIS.

Science.gov (United States)

Wang, Jian-Ping; Guo, Xi-Kun

2005-08-01

To provide effective environmental management for total amount control of atmospheric pollutants. An atmospheric diffusion model of sulfur dioxide on the surface of the earth was established and tested in Shantou of Guangdong Province on the basis of an overall assessment of regional natural environment, social economic state of development, pollution sources and atmospheric environmental quality. Compared with actual monitoring results in a studied region, simulation values fell within the range of two times of error and were evenly distributed in the two sides of the monitored values. Predicted with the largest emission model method, the largest emission of sulfur dioxide would be 54,279.792 tons per year in 2010. The mathematical model established and revised on the basis of GIS is more rational and suitable for the regional characteristics of total amount control of air pollutants.

A direct solution procedure for calculating time-varying stresses in structural systems by the principles of variational calculus

International Nuclear Information System (INIS)

Stefanou, G.D.

1975-01-01

The calculation of time-dependent stresses in structural systems operating at elevated temperatures with temperature gradients is discussed. The proposed method described in this report is of a direct formulation technique and

22 CFR 226.73 - Collection of amounts due.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Collection of amounts due. 226.73 Section 226.73 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS After-the-Award Requirements § 226.73 Collection of amounts due. (a...

Directional absorption by phased arrays of plasmonic nanoantennae probed with time-reversed Fourier microscopy

International Nuclear Information System (INIS)

Lozano, Gabriel; Barten, Tommy; Grzela, Grzegorz; Rivas, Jaime Gómez

2014-01-01

We demonstrate that an ordered array of aluminum nanopyramids, behaving as a phased array of optical antennae, strongly modifies light absorption in thin layers of dye molecules. Photoluminescence measurements as a function of the illumination angle are performed using a time-reversed Fourier microscope. This technique enables a variable-angle plane-wave illumination of nanostructures in a microscope-based setup. Our measurements reveal an enhancement of the light conversion in certain directions of illumination, which indicate the efficient diffractive coupling between the free space radiation and the surface plasmons. Numerical simulations confirm that surface modes supported by the periodic array enhance the intensity of the pump field in the space between particles, where the dye molecules are located, yielding a directional plasmonic-mediated enhancement of the optical absorption. This combined experimental and numerical characterization of the angular dependence of light absorption in nanostructures can be beneficial for the design and optimization of devices in which the harvesting of light plays a major role. (paper)

Kinetic Spectrophotometric Determination of Trace Amounts of Sulfide

Energy Technology Data Exchange (ETDEWEB)

Barzegar, Mohsen [Tarbiat Modarres University, Tehran (Iran, Islamic Republic of); Jabbari, Ali [K. N. Toosi University, Tehran (Iran, Islamic Republic of); Esmaeili, Majid [Razi University, Kermanshah (Iran, Islamic Republic of)

2003-09-15

A method for the determination of trace amount of sulfide based on the addition reaction of sulfide with methyl green at pH 7.5 and 25 .deg. C is described. The reaction is monitored spectrophotometrically by measuring the decrease in absorbance of the dyestuff at 637 nm by the initial rate and fixed time method. The calibration graph is linear in the range 30-1200 ppb. The theoretical limit of detection was 0.014 ppm. Seven replicate analysis of a sample solution containing 0.70 ppm sulfide gave a relative standard deviation of 1.5%. The interfering effects of various ions on sulfide determination have been reported and procedures for removal of interference have been described. The proposed method was applied successfully to the determination of sulfide in tap and wastewater samples.

Kinetic Spectrophotometric Determination of Trace Amounts of Sulfide

International Nuclear Information System (INIS)

Barzegar, Mohsen; Jabbari, Ali; Esmaeili, Majid

2003-01-01

A method for the determination of trace amount of sulfide based on the addition reaction of sulfide with methyl green at pH 7.5 and 25 .deg. C is described. The reaction is monitored spectrophotometrically by measuring the decrease in absorbance of the dyestuff at 637 nm by the initial rate and fixed time method. The calibration graph is linear in the range 30-1200 ppb. The theoretical limit of detection was 0.014 ppm. Seven replicate analysis of a sample solution containing 0.70 ppm sulfide gave a relative standard deviation of 1.5%. The interfering effects of various ions on sulfide determination have been reported and procedures for removal of interference have been described. The proposed method was applied successfully to the determination of sulfide in tap and wastewater samples

Applications of alternating direction methods to the solution of the time-dependent heat conduction equation with source and in transients stage

International Nuclear Information System (INIS)

Gebrin, A.N.

1981-10-01

Various types and also some variants of alternating direction methods, (A.D.M.), were applied to the solution of the time-dependent heat conduction equation, with source, in region with axial symetry. The results shown that some of the variants perform consistently better than the Classical Cranck-Nicolson method. Having in mind a combination of accuracy, ability to support larg time steps and computational efficiency, the 'alternating direction explicit', (A.D.E.) method appears as the best choice, being the 'alternating direction checkerboard', (A.D.C), method the second best. Additional operations like the exponential transformation or the truncation pos-correction don't seem to be worth, excect for some special cases. (Author) [pt

Barriers to Real-Time Medical Direction via Cellular Communication for Prehospital Emergency Care Providers in Gujarat, India.

Science.gov (United States)

Lindquist, Benjamin; Strehlow, Matthew C; Rao, G V Ramana; Newberry, Jennifer A

2016-07-08

Many low- and middle-income countries depend on emergency medical technicians (EMTs), nurses, midwives, and layperson community health workers with limited training to provide a majority of emergency medical, trauma, and obstetric care in the prehospital setting. To improve timely patient care and expand provider scope of practice, nations leverage cellular phones and call centers for real-time online medical direction. However, there exist several barriers to adequate communication that impact the provision of emergency care. We sought to identify obstacles in the cellular communication process among GVK Emergency Management and Research Institute (GVK EMRI) EMTs in Gujarat, India. A convenience sample of practicing EMTs in Gujarat, India were surveyed regarding the barriers to call initiation and completion. 108 EMTs completed the survey. Overall, ninety-seven (89.8%) EMTs responded that the most common reason they did not initiate a call with the call center physician was insufficient time. Forty-six (42%) EMTs reported that they were unable to call the physician one or more times during a typical workweek (approximately 5-6 twelve-hour shifts/week) due to their hands being occupied performing direct patient care. Fifty-eight (54%) EMTs reported that they were unable to reach the call center physician, despite attempts, at least once a week. This study identified multiple barriers to communication, including insufficient time to call for advice and inability to reach call center physicians. Identification of simple interventions and best practices may improve communication and ensure timely and appropriate prehospital care.

Direct and indirect costs of tuberculosis among immigrant patients in the Netherlands.

Science.gov (United States)

Kik, Sandra V; Olthof, Sandra P J; de Vries, Jonie T N; Menzies, Dick; Kincler, Naomi; van Loenhout-Rooyakkers, Joke; Burdo, Conny; Verver, Suzanne

2009-08-05

In low tuberculosis (TB) incidence countries TB affects mostly immigrants in the productive age group. Little empirical information is available about direct and indirect TB-related costs that patients face in these high-income countries. We assessed the direct and indirect costs of immigrants with TB in the Netherlands. A cross-sectional survey at 14 municipal health services and 2 specialized TB hospitals was conducted. Interviews were administered to first or second generation immigrants, 18 years or older, with pulmonary or extrapulmonary TB, who were on treatment for 1-6 months. Out of pocket expenditures and time loss, related to TB, was assessed for different phases of the current TB illness. In total 60 patients were interviewed. Average direct costs spent by households with a TB patient amounted euro353. Most costs were spent when being hospitalized. Time loss (mean 81 days) was mainly due to hospitalization (19 days) and additional work days lost (60 days), and corresponded with a cost estimation of euro2603. Even in a country with a good health insurance system that covers medication and consultation costs, patients do have substantial extra expenditures. Furthermore, our patients lost on average 2.7 months of productive days. TB patients are economically vulnerable.

Direct and indirect costs of tuberculosis among immigrant patients in the Netherlands

Directory of Open Access Journals (Sweden)

Kincler Naomi

2009-08-01

Full Text Available Abstract Background In low tuberculosis (TB incidence countries TB affects mostly immigrants in the productive age group. Little empirical information is available about direct and indirect TB-related costs that patients face in these high-income countries. We assessed the direct and indirect costs of immigrants with TB in the Netherlands. Methods A cross-sectional survey at 14 municipal health services and 2 specialized TB hospitals was conducted. Interviews were administered to first or second generation immigrants, 18 years or older, with pulmonary or extrapulmonary TB, who were on treatment for 1–6 months. Out of pocket expenditures and time loss, related to TB, was assessed for different phases of the current TB illness. Results In total 60 patients were interviewed. Average direct costs spent by households with a TB patient amounted €353. Most costs were spent when being hospitalized. Time loss (mean 81 days was mainly due to hospitalization (19 days and additional work days lost (60 days, and corresponded with a cost estimation of €2603. Conclusion Even in a country with a good health insurance system that covers medication and consultation costs, patients do have substantial extra expenditures. Furthermore, our patients lost on average 2.7 months of productive days. TB patients are economically vulnerable.

Time to Criterion: An Experimental Study.

Science.gov (United States)

Anderson, Lorin W.

The purpose of the study was to investigate the magnitude of individual differences in time-to-criterion and the stability of these differences. Time-to-criterion was defined in two ways: the amount of elapsed time required to attain the criterion level and the amount of on-task time required to attain the criterion level. Ninety students were…

Early years neurosurgical training in the era of the European Working Time Directive.

Science.gov (United States)

Kirkman, Matthew A; Watkins, Laurence D; Kitchen, Neil D; Sethi, Huma

2013-10-01

The past decade has seen significant changes to the face of neurosurgical training in the United Kingdom, driven in part by an increasing focus on patient safety and the introduction of Modernising Medical Careers and the European Working Time Directive (EWTD). Recent reforms to neurosurgical training over the past few years have resulted in creation of an 8-year 'run-through' training programme. In this programme, early years (ST1 and ST2) trainees often lack dedicated time for elective theatre lists and outpatient clinics. Further, any time spent in theatre and clinics is often with different teams. Here we describe a training model for early years trainees at the National Hospital for Neurology and Neurosurgery, who are given the responsibilities traditionally associated with a more senior trainee including dedicated weekly theatre and clinic time under the supervision of a single consultant, in addition to out of hours experience. The advantages and considerations for implementing this model are discussed, including the benefit of guidance under a single consultant in the early stages of training, along with key educational concepts necessary for understanding its utility. We feel that this is an effective model for junior neurosurgical training in the EWTD era, expediting the trainee's development of key technical and non-technical skills, with potentially significant rewards for patient, trainee and trainer. National implementation of this model should be considered.

Directional synthetic aperture flow imaging using a dual stage beamformer approach

DEFF Research Database (Denmark)

Li, Ye; Jensen, Jørgen Arendt

2011-01-01

. The new method has been studied using the Field II simulations and experimental flow rig measurements. A linear array transducer with 7 MHz center frequency is used, and 64 elements are active to transmit and receive signals. The data is processed in two stages. The first stage has a fixed focus point......A new method for directional synthetic aperture flow imaging using a dual stage beamformer approach is presented. The velocity estimation is angle independent and the amount of calculations is reduced compared to full synthetic aperture, but still maintains all the advantages at the same time....... In the second stage, focal points are considered as virtual sources and data is beamformed along the flow direction. Then the velocities are estimated by finding the spatial shift between two signals. In the experimental measurements the angle between the transmit beam and flow vessel was 70 and a laminar flow...

5 CFR 870.704 - Amount of Option A.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Amount of Option A. 870.704 Section 870... of Option A. (a) The amount of Option A coverage an annuitant or compensationer can continue is $10,000. (b) An annuitant's or compensationer's Option A coverage reduces by 2 percent of the original...

46 CFR 282.20 - Amount of subsidy payable.

Science.gov (United States)

2010-10-01

... Rates. Daily ODS rates shall be used to quantify the amount of ODS payable. The daily ODS rate... items is the daily amount of ODS payable for approved vessel operating days, excluding reduced crew... the daily wage ODS rate to conform to the complement remaining on the vessel. The man-day reduction...

Using linear time-invariant system theory to estimate kinetic parameters directly from projection measurements

International Nuclear Information System (INIS)

Zeng, G.L.; Gullberg, G.T.

1995-01-01

It is common practice to estimate kinetic parameters from dynamically acquired tomographic data by first reconstructing a dynamic sequence of three-dimensional reconstructions and then fitting the parameters to time activity curves generated from the time-varying reconstructed images. However, in SPECT, the pharmaceutical distribution can change during the acquisition of a complete tomographic data set, which can bias the estimated kinetic parameters. It is hypothesized that more accurate estimates of the kinetic parameters can be obtained by fitting to the projection measurements instead of the reconstructed time sequence. Estimation from projections requires the knowledge of their relationship between the tissue regions of interest or voxels with particular kinetic parameters and the project measurements, which results in a complicated nonlinear estimation problem with a series of exponential factors with multiplicative coefficients. A technique is presented in this paper where the exponential decay parameters are estimated separately using linear time-invariant system theory. Once the exponential factors are known, the coefficients of the exponentials can be estimated using linear estimation techniques. Computer simulations demonstrate that estimation of the kinetic parameters directly from the projections is more accurate than the estimation from the reconstructed images

Solid-phase extraction with the metal-organic framework MIL-101(Cr) combined with direct analysis in real time mass spectrometry for the fast analysis of triazine herbicides.

Science.gov (United States)

Li, Xianjiang; Xing, Jiawei; Chang, Cuilan; Wang, Xin; Bai, Yu; Yan, Xiuping; Liu, Huwei

2014-06-01

MIL-101(Cr) is an excellent metal-organic framework with high surface area and nanoscale cavities, making it promising in solid-phase extraction. Herein, we used MIL-101(Cr) as a solid-phase extraction packing material combined with fast detection of direct analysis in real time mass spectrometry (DART-MS) for the analysis of triazine herbicides. After systematic optimization of the operation parameters, including the gas temperature of DART, the moving speed of the 1D platform, solvent for desorption, amount of MIL-101(Cr) extraction time, eluent volume and salt concentration, this method can realize the simultaneous detection of five kinds of triazine herbicides. The limits of detection were 0.1∼0.2 ng/mL and the linear ranges covered more than two orders of magnitude with the quantitation limits of 0.5∼1 ng/mL. Moreover, the developed method has been applied for the analysis of lake water samples and the recoveries for spiked analytes were in the range of 85∼110%. These results showed that solid-phase extraction with metal-organic frameworks is an efficient sample preparation approach for DART-MS analysis and could find more applications in environmental analysis. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

45 CFR 1225.11 - Amount of attorney fees.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Amount of attorney fees. 1225.11 Section 1225.11... § 1225.11 Amount of attorney fees. (a) When a decision of the agency provides for an award of attorney's fees or costs, the complainant's attorney shall submit a verified statement of costs and attorney's...

In-situ, real-time, studies of film growth processes using ion scattering and direct recoil spectroscopy techniques.

Energy Technology Data Exchange (ETDEWEB)

Smentkowski, V. S.

1999-04-22

Time-of-flight ion scattering and recoil spectroscopy (TOF-ISARS) enables the characterization of the composition and structure of surfaces with 1-2 monolayer specificity. It will be shown that surface analysis is possible at ambient pressures greater than 3 mTorr using TOF-ISARS techniques; allowing for real-time, in situ studies of film growth processes. TOF-ISARS comprises three analytical techniques: ion scattering spectroscopy (ISS), which detects the backscattered primary ion beam; direct recoil spectroscopy (DRS), which detects the surface species recoiled into the forward scattering direction; and mass spectroscopy of recoiled ions (MSRI), which is 3 variant of DRS capable of isotopic resolution for all surface species--including H and He. The advantages and limitations of each of these techniques will be discussed. The use of the three TOF-ISARS methods for real-time, in situ film growth studies at high ambient pressures will be illustrated. It will be shown that MSRI analysis is possible during sputter deposition. It will be also be demonstrated that the analyzer used for MSRI can also be used for time of flight secondary ion mass spectroscopy (TOF-SIMS) under high vacuum conditions. The use of a single analyzer to perform the complimentary surface analytical techniques of MSRI and SIMS is unique. The dwd functionality of the MSRI analyzer provides surface information not obtained when either MSRI or SIMS is used independently.

Directional Transverse Oscillation Vector Flow Estimation

DEFF Research Database (Denmark)

Jensen, Jørgen Arendt

2017-01-01

A method for estimating vector velocities using transverse oscillation (TO) combined with directional beamforming is presented. In Directional Transverse Oscillation (DTO) a normal focused field is emitted and the received signals are beamformed in the lateral direction transverse to the ultrasound...... beam to increase the amount of data for vector velocity estimation. The approach is self-calibrating as the lateral oscillation period is estimated from the directional signal through a Fourier transform to yield quantitative velocity results over a large range of depths. The approach was extensively...... simulated using Field IIpro and implemented on the experimental SARUS scanner in connection with a BK Medical 8820e convex array transducer. Velocity estimates for DTO are found for beam-to-flow angles of 60, 75, and 90, and vessel depths from 24 to 156 mm. Using 16 emissions the Standard Deviation (SD...

39 CFR 601.111 - Interest on claim amounts.

Science.gov (United States)

2010-07-01

... that date is later, until the date of payment. Simple interest will be paid at the rate established by... 39 Postal Service 1 2010-07-01 2010-07-01 false Interest on claim amounts. 601.111 Section 601.111... PROPERTY RIGHTS OTHER THAN PATENTS PURCHASING OF PROPERTY AND SERVICES § 601.111 Interest on claim amounts...

Experimental Results for Minimum-Time Trajectory Tracking of a Direct-Drive Three-Link Planar Arm

Energy Technology Data Exchange (ETDEWEB)

DRIESSEN,BRIAN; PARKER,GORDON G.

1999-09-01

This work is an experimental investigation of the ability of a real three-link direct-drive arm to track model-based minimum-time trajectories that have been found off-line. Sufficiently large velocity gains in the computed torque control law were not achievable with the velocity sensors described herein. This indicates the critical importance of the velocity sensing when attempting to track trajectories that push the envelope of the system's torque capabilities.

Biomechanical factors associated with time to complete a change of direction cutting maneuver.

Science.gov (United States)

Marshall, Brendan M; Franklyn-Miller, Andrew D; King, Enda A; Moran, Kieran A; Strike, Siobhán C; Falvey, Éanna C

2014-10-01

Cutting ability is an important aspect of many team sports, however, the biomechanical determinants of cutting performance are not well understood. This study aimed to address this issue by identifying the kinetic and kinematic factors correlated with the time to complete a cutting maneuver. In addition, an analysis of the test-retest reliability of all biomechanical measures was performed. Fifteen (n = 15) elite multidirectional sports players (Gaelic hurling) were recruited, and a 3-dimensional motion capture analysis of a 75° cut was undertaken. The factors associated with cutting time were determined using bivariate Pearson's correlations. Intraclass correlation coefficients (ICCs) were used to examine the test-retest reliability of biomechanical measures. Five biomechanical factors were associated with cutting time (2.28 ± 0.11 seconds): peak ankle power (r = 0.77), peak ankle plantar flexor moment (r = 0.65), range of pelvis lateral tilt (r = -0.54), maximum thorax lateral rotation angle (r = 0.51), and total ground contact time (r = -0.48). Intraclass correlation coefficient scores for these 5 factors, and indeed for the majority of the other biomechanical measures, ranged from good to excellent (ICC >0.60). Explosive force production about the ankle, pelvic control during single-limb support, and torso rotation toward the desired direction of travel were all key factors associated with cutting time. These findings should assist in the development of more effective training programs aimed at improving similar cutting performances. In addition, test-retest reliability scores were generally strong, therefore, motion capture techniques seem well placed to further investigate the determinants of cutting ability.

Quantification and determinants of the amount of respiratory syncytial virus (RSV shed using real time PCR data from a longitudinal household study [version 2; referees: 2 approved, 2 approved with reservations

Directory of Open Access Journals (Sweden)

Miriam Wathuo

2017-03-01

Full Text Available Background A better understanding of respiratory syncytial virus (RSV epidemiology requires realistic estimates of RSV shedding patterns, quantities shed, and identification of the related underlying factors. Methods RSV infection data arise from a cohort study of 47 households with 493 occupants, in coastal Kenya, during the 2009/2010 RSV season. Nasopharyngeal swabs were taken every 3 to 4 days and screened for RSV using a real time polymerase chain reaction (PCR assay. The amount of virus shed was quantified by calculating the ‘area under the curve’ using the trapezoidal rule applied to rescaled PCR cycle threshold output. Multivariable linear regression was used to identify correlates of amount of virus shed. Results The median quantity of virus shed per infection episode was 29.4 (95% CI: 15.2, 54.2 log10 ribonucleic acid (RNA copies * days. Young age (<1 year, presence of upper respiratory symptoms, intra-household acquisition of infection, an individual’s first infection episode in the RSV season, and having a co-infection of RSV group A and B were associated with increased amount of virus shed. Conclusions The findings provide insight into which groups of individuals have higher potential for transmission, information which may be useful in designing RSV prevention strategies.

Dependence of 'CT clearance' on dosage and time

International Nuclear Information System (INIS)

Kaltenborn, H.A.; Klose, K.J.; Dexheimer, C.; Steinijans, V.

1989-01-01

The contrast medium dose used in CT renal function analysis corresponds to about 1 ml/kg body weight at a measurement interval of 5 or 10 minutes. In the present study the dependence of 'CT clearance' on dosage and time was examined in 12 healthy subjects. The amount of clearance was directly proportional to the employed contrast medium dose and to the length of the measurement interval. On account of the superior signal-to-noise ratio, the higher dose (1 ml/kg body weight) will continue to be prefered in future. The measurement interval can be limited to 10 minutes. (orig.) [de

Race perception and gaze direction differently impair visual working memory for faces: An event-related potential study.

Science.gov (United States)

Sessa, Paola; Dalmaso, Mario

2016-01-01

Humans are amazingly experts at processing and recognizing faces, however there are moderating factors of this ability. In the present study, we used the event-related potential technique to investigate the influence of both race and gaze direction on visual working memory (i.e., VWM) face representations. In a change detection task, we orthogonally manipulated race (own-race vs. other-race faces) and eye-gaze direction (direct gaze vs. averted gaze). Participants were required to encode identities of these faces. We quantified the amount of information encoded in VWM by monitoring the amplitude of the sustained posterior contralateral negativity (SPCN) time-locked to the faces. Notably, race and eye-gaze direction differently modulated SPCN amplitude such that other-race faces elicited reduced SPCN amplitudes compared with own-race faces only when displaying a direct gaze. On the other hand, faces displaying averted gaze, independently of their race, elicited increased SPCN amplitudes compared with faces displaying direct gaze. We interpret these findings as denoting that race and eye-gaze direction affect different face processing stages.

Algorithm for determining two-periodic steady-states in AC machines directly in time domain

Directory of Open Access Journals (Sweden)

Sobczyk Tadeusz J.

2016-09-01

Full Text Available This paper describes an algorithm for finding steady states in AC machines for the cases of their two-periodic nature. The algorithm enables to specify the steady-state solution identified directly in time domain despite of the fact that two-periodic waveforms are not repeated in any finite time interval. The basis for such an algorithm is a discrete differential operator that specifies the temporary values of the derivative of the two-periodic function in the selected set of points on the basis of the values of that function in the same set of points. It allows to develop algebraic equations defining the steady state solution reached in a chosen point set for the nonlinear differential equations describing the AC machines when electrical and mechanical equations should be solved together. That set of those values allows determining the steady state solution at any time instant up to infinity. The algorithm described in this paper is competitive with respect to the one known in literature an approach based on the harmonic balance method operated in frequency domain.

Changes in amount and intracellular distribution of androgen receptor in human foreskin as a function of age.

Science.gov (United States)

Roehrborn, C G; Lange, J L; George, F W; Wilson, J D

1987-01-01

To provide insight into the factors that control growth of the penis we measured the amount and intracellular distribution of specific high affinity androgen receptor in foreskins obtained at circumcision from 49 males varying in age from newborn to 59 yr. Total (cytosolic plus nuclear extract) androgen receptor decreased from approximately 40 fmol/g tissue weight in newborn foreskins to approximately 25 fmol/g by 1 yr of age. The amount of receptor rose in childhood to approximately 180 fmol/g in the late teenage years and fell thereafter to approximately 20-40 fmol/g in men older than 40 yr. The amount of receptor in the nuclear fraction increased at the time of puberty and subsequently decreased in parallel with the decline in total receptor level. These changes in androgen-receptor amount are similar when expressed per milligram DNA or per milligram protein. Images PMID:3491838

Nuclear liability amounts on the rise for nuclear installations

International Nuclear Information System (INIS)

Vasquez-Maignan, Ximena; Schwartz, Julia; Kuzeyli, Kaan

2015-01-01

The NEA Table on Nuclear Operator Liability Amounts and Financial Security Limits (NEA 'Liability Table'), which covers 71 countries, aims to provide one of the most comprehensive listings of nuclear liability amounts and financial security limits. The current and revised Paris and Brussels Supplementary Conventions ('Paris-Brussels regime'), the original and revised Vienna Conventions ('Vienna regime') and the Convention on Supplementary Compensation for Nuclear Damage, newly entered into force in April 2015, provide for the minimum amounts to be transposed in the national legislation of states parties to the conventions, and have served as guidelines for non-convention states. This article examine in more detail increases in the liability amounts provided for under these conventions, as well as examples of non-convention states (China, India and Korea)

Self-Regulation of the Primary Auditory Cortex Attention Via Directed Attention Mediated By Real Time fMRI Neurofeedback

Science.gov (United States)

2017-05-05

NELSON FROM: 59 MDW /SGYU SUBJECT: Professional Presentation Approval 1. Your paper, entitled Self - regulation of the Primary Auditory Cortex Attention via...DATE Sherwood - p.1 Self - regulation of the primary auditory cortex attention via directed attention mediated by real-time fMRI neurofeedback M S...auditory cortex hyperactivity by self - regulation of the primary auditory cortex (A 1) based on real-time functional magnetic resonance imaging neurofeedback

Development of volume rendering module for real-time visualization system

International Nuclear Information System (INIS)

Otani, Takayuki; Muramatsu, Kazuhiro

2000-03-01

Volume rendering is a method to visualize the distribution of physical quantities in the three dimensional space from any viewpoint by tracing the ray direction on the ordinary two dimensional monitoring display. It enables to provide the interior information as well as the surfacial one by producing the translucent images. Therefore, it is regarded as a very useful means as well as an important one in the analysis of the computational results of the scientific calculations, although it has, unfortunately, disadvantage to need a large amount of computing time. This report describes algorithm and its performance of the volume rendering soft-ware which was developed as an important functional module in the real-time visualization system PATRAS. This module can directly visualize the computed results on BFC grid. Moreover, it has already realized the speed-up in some parts of the software by the use of a newly developed heuristic technique. This report includes the investigation on the speed-up of the software by parallel processing. (author)

Amount of trace elements in marine cephalopods

International Nuclear Information System (INIS)

Ueda, Taiji; Nakahara, Motokazu; Ishii, Toshiaki; Suzuki, Yuzuru; Suzuki, Hamaji.

1979-01-01

For the estimation of internal radiation to human beings, the amounts of Mn, Fe, Cu, Zn, Co and Cs in 5 species of marine cephalopods were determined by atomic absorption spectrophotometry and neutron activation analysis, and then the concentration factors were calculated. The average amount and the concentration factor of the elements in the edible parts (mantle, arms and tentacles) of cephalopods are as follows: 0.14 mg, 2 x 10 2 for Mn, 1.8 mg, 2 x 10 2 for Fe, 2.0 mg, 7 x 10 2 for Cu, 12.2 mg, 1 x 10 3 for Zn, 5.3 μg, 6 x 10 1 for Co and 3.4 μg, 7 for Cs. The amounts of Fe, Co, Cu and Zn in the liver and the branchial heart were much higher than those in the edible parts, although those of Cs and Mn were almost the same. The Co content in the visceral organs of O. Vulgaris showed extremely high value, particularly in the branchial heart. (author)

The Tradeoff Between Mutual Fund and Direct Stock Investments

DEFF Research Database (Denmark)

Marekwica, Marcel; Steininger, Bertram I.

2014-01-01

We study the tradeoff between direct and indirect stock investments through equity mutual funds for a utility-maximizing investor. Whereas direct investments impose higher transaction costs on the formation of a well-diversified portfolio, mutual funds charge fees for their services. Our results...... show that the fee levels that make private investors indifferent between direct and indirect stock investments vary heavily according to risk aversion, the amounts invested, correlations between assets, transaction costs, and the length of investment horizon. In particular, our results suggest...

Two-dimensional time-resolved X-ray diffraction study of directional solidification in steels

International Nuclear Information System (INIS)

Yonemura, Mitsuharu

2009-01-01

Full text: The high intensity heat source used for fusion welding creates steep thermal gradients of 100 degree C/s from 1800 degree Celsius. Further, the influence of a preferred orientation is serious for observation of a directional solidification that follows the dendrite growth along the direction toward the moving heat source. Therefore, we observed the rapid solidification of weld metal at a time resolution of 0.01∼0.1seconds by the Two-Dimensional Time-Resolved X-ray Diffraction (2DTRXRD) system for real welding. The diffraction ring was dynamically observed by 2DTRXRD during arc-passing over the irradiation area of X-ray with synchrotron energy of 18 KeV. The arc power output was 10 V - 150 A, and a scan speed of the arc was 1.0 mm/s. The temperature rise of instruments was suppressed by the water-cooled copper plate under the sample. Further, the temperature distribution of the weld metal was measured by the thermocouple and related to the diffraction patterns. Consequently, solidification and solid phase transformation of low carbon steels and stainless steels were observed during rapid cooling by 2DTRXRD. In the low-carbon steel, the microstructure is formed in the 2 step process; (i) formation of crystallites and (ii) increase of crystallinity. In the stainless steel, the irregular interface layer of σ/y in the quenched metal after solidification is expected that it is easy for dendrites to move at the lower temperature. In the carbide precipitation stainless steel, it is easy for NbC to grow on σ phase with a little under cooling. Further, a mist-like pattern, which differs from the halo-pattern, in the fusion zone gave some indication of the possibilities to observe the nucleation and the early solidification by 2DTRXRD. (author)

45 CFR 160.404 - Amount of a civil money penalty.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Amount of a civil money penalty. 160.404 Section... RELATED REQUIREMENTS GENERAL ADMINISTRATIVE REQUIREMENTS Imposition of Civil Money Penalties § 160.404 Amount of a civil money penalty. (a) The amount of a civil money penalty will be determined in accordance...

Chemical discrimination of lubricant marketing types using direct analysis in real time time-of-flight mass spectrometry.

Science.gov (United States)

Maric, Mark; Harvey, Lauren; Tomcsak, Maren; Solano, Angelique; Bridge, Candice

2017-06-30

In comparison to other violent crimes, sexual assaults suffer from very low prosecution and conviction rates especially in the absence of DNA evidence. As a result, the forensic community needs to utilize other forms of trace contact evidence, like lubricant evidence, in order to provide a link between the victim and the assailant. In this study, 90 personal bottled and condom lubricants from the three main marketing types, silicone-based, water-based and condoms, were characterized by direct analysis in real time time of flight mass spectrometry (DART-TOFMS). The instrumental data was analyzed by multivariate statistics including hierarchal cluster analysis, principal component analysis, and linear discriminant analysis. By interpreting the mass spectral data with multivariate statistics, 12 discrete groupings were identified, indicating inherent chemical diversity not only between but within the three main marketing groups. A number of unique chemical markers, both major and minor, were identified, other than the three main chemical components (i.e. PEG, PDMS and nonoxynol-9) currently used for lubricant classification. The data was validated by a stratified 20% withheld cross-validation which demonstrated that there was minimal overlap between the groupings. Based on the groupings identified and unique features of each group, a highly discriminating statistical model was then developed that aims to provide the foundation for the development of a forensic lubricant database that may eventually be applied to casework. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Standard deviation of wind direction as a function of time; three hours to five hundred seventy-six hours

International Nuclear Information System (INIS)

Culkowski, W.M.

1976-01-01

The standard deviation of horizontal wind direction sigma/sub theta/ increases with time of averaging up to a maximum value of 104 0 . The average standard deviation of horizontal wind directions averaged over periods of 3, 5, 10, 16, 24, 36, 48, 72, 144, 288, and 576 hours were calculated from wind data obtained from a 100 meter tower in the Oak Ridge area. For periods up to 100 hours, sigma/sub theta/ varies as t/sup .28/; after 100 hours sigma/sub theta/ varies as 6.5 ln t

Direct solid phase radioimmunoassay for chicken lipoprotein lipase

International Nuclear Information System (INIS)

Cheung, A.H.; Bensadoun, A.; Cheng, C.

1979-01-01

A direct, noncompetitive immunoassay for chicken lipoprotein lipase (LPL) was developed. Antibodies to LPL were purified by immunoadsorption chromatography of goat antisera on an LPL-Sepharose column. Purified anti-LPL immunoglobulins were coupled covalently to hydrophilic polyacrylamide beads by a carbodiimide reagent. An excess amount of these beads was incubated with the sample on the standard to be assayed. The amount of LPL immobilized by the heads was then detected by an excess amount of 125 I-labeled anti-LPL immunoglobulin. A linear relationship was obtained between the radioactivity bound and the amount of highly purified LPL used as a standard. The range of the assay was from 0.1 to 1.1 ng PLP. The assay was specific for chicken LPL and showed no cross-reactivity with liver lipase. It does not distinguish heat-inactivated from catalytically active enzyme species. This assay should be useful in studies of lipoprotein lipase where both catalytic activity and enzyme mass need to be quantitated

Accurate Estimation of Target amounts Using Expanded BASS Model for Demand-Side Management

Science.gov (United States)

Kim, Hyun-Woong; Park, Jong-Jin; Kim, Jin-O.

2008-10-01

The electricity demand in Korea has rapidly increased along with a steady economic growth since 1970s. Therefore Korea has positively propelled not only SSM (Supply-Side Management) but also DSM (Demand-Side Management) activities to reduce investment cost of generating units and to save supply costs of electricity through the enhancement of whole national energy utilization efficiency. However study for rebate, which have influence on success or failure on DSM program, is not sufficient. This paper executed to modeling mathematically expanded Bass model considering rebates, which have influence on penetration amounts for DSM program. To reflect rebate effect more preciously, the pricing function using in expanded Bass model directly reflects response of potential participants for rebate level.

Late excretion of plutonium following acquisition of known amounts

International Nuclear Information System (INIS)

Rundo, J.

1981-01-01

The urinary and fecal excretion rates of plutonium 10,000 days after intravenous injection of known amounts are compared with the predictions of various models. Both Langham's and Durbin's equations underestimated the urinary excretion by about an order of magnitude; the observed fecal excretion rates were also higher than the predictions. The total excretion rate predicted by the ICRP model was in quite good agreement with the observed rate, but it overestimated it at early times ( 239 Pu of former Manhattan Project plutonium workers, as calculated from the measured urinary excretion an application of Langham's equation. In one of these subjects the urinary excretion rate started to increase at about 6000 days, reached a maximum at about 9500 days, and declined for the next 2700 days

26 CFR 25.2701-3 - Determination of amount of gift.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Determination of amount of gift. 25.2701-3... AND GIFT TAXES GIFT TAX; GIFTS MADE AFTER DECEMBER 31, 1954 Special Valuation Rules § 25.2701-3 Determination of amount of gift. (a) Overview—(1) In general. The amount of the gift resulting from any transfer...

Identification of blood culture isolates directly from positive blood cultures by use of matrix-assisted laser desorption ionization-time of flight mass spectrometry and a commercial extraction system: analysis of performance, cost, and turnaround time.

Science.gov (United States)

Lagacé-Wiens, Philippe R S; Adam, Heather J; Karlowsky, James A; Nichol, Kimberly A; Pang, Paulette F; Guenther, Jodi; Webb, Amanda A; Miller, Crystal; Alfa, Michelle J

2012-10-01

Matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry represents a revolution in the rapid identification of bacterial and fungal pathogens in the clinical microbiology laboratory. Recently, MALDI-TOF has been applied directly to positive blood culture bottles for the rapid identification of pathogens, leading to reductions in turnaround time and potentially beneficial patient impacts. The development of a commercially available extraction kit (Bruker Sepsityper) for use with the Bruker MALDI BioTyper has facilitated the processing required for identification of pathogens directly from positive from blood cultures. We report the results of an evaluation of the accuracy, cost, and turnaround time of this method for 61 positive monomicrobial and 2 polymicrobial cultures representing 26 species. The Bruker MALDI BioTyper with the Sepsityper gave a valid (score, >1.7) identification for 85.2% of positive blood cultures with no misidentifications. The mean reduction in turnaround time to identification was 34.3 h (P MALDI-TOF was used for all blood cultures and 26.5 h in a more practical setting where conventional identification or identification from subcultures was required for isolates that could not be directly identified by MALDI-TOF. Implementation of a MALDI-TOF-based identification system for direct identification of pathogens from blood cultures is expected to be associated with a marginal increase in operating costs for most laboratories. However, the use of MALDI-TOF for direct identification is accurate and should result in reduced turnaround time to identification.

75 FR 58407 - Medicare Program; Medicare Appeals; Adjustment to the Amount in Controversy Threshold Amounts for...

Science.gov (United States)

2010-09-24

... Administrative Law Judge (ALJ) hearings and judicial review under the Medicare appeals process. The adjustment to the AIC threshold amounts will be effective for requests for ALJ hearings and judicial review filed on... judicial review. DATES: Effective Date: This notice is effective on January 1, 2011. FOR FURTHER...

Hepatic glycogen in humans. I. Direct formation after oral and intravenous glucose or after a 24-h fast

International Nuclear Information System (INIS)

Radziuk, J.

1989-01-01

The formation of hepatic glycogen by the direct pathway is assessed in humans after a 12-h fast and oral loading (100 g) or intravenous infusion (90 g) and after a 24-h fast and the same oral glucose load. The methodology used is based on the double tracer method. [3- 3 H]glucose is infused at a constant rate for the determination of the metabolic clearance of glucose. [1- 14 C]glucose is administered with the glucose load. One hour after absorption or the intravenous glucose infusion is terminated, a glucagon infusion is initiated to mobilize the glycogen labeled with [1- 14 C]glucose and formed during the absorptive period. At this time a third tracer, [6- 3 H]glucose, is administered to measure glucose clearance. It was found that after the 12-h fast and oral glucose loading 7.2 +/- 1.1 g of hepatic glycogen appears to be formed directly from glucose compared with 8.4 +/- 1.0 g after the same load and a 24-h fast and 8.5 +/- 0.4 g after a 12-h fast and an equivalent intravenous glucose infusion. When the amount of label ([ 14 C]glucose) mobilized that was not corrected for metabolic recycling was calculated, the data suggested that the amount of glycogen formed by gluconeogenic pathways was probably at least equal to that formed by direct uptake. It was also approximately 60% greater after a 24-h fast. It can be concluded that the amount of hepatic glycogen formed directly from glucose during glucose loading is not significantly altered by the route of entry or the extension of the fasting period to 24 h. The data suggest, however, that gluconeogenetic formation of glycogen increases with fasting

The direct incorporation of micro-encapsulated phase change materials in the concrete mixing process

NARCIS (Netherlands)

Hunger, M.; Entrop, A.G.; Mandilaras, I.; Brouwers, H.J.H.; Founti, M.; Durmisevic, E.

2009-01-01

The present study refers to a set of tests using different amounts of microencapsulated PCM directly mixed into self-compacting concrete. This SCC is investigated regarding its fresh and hardened properties. It will be shown that increasing PCM amounts lead to lower thermal conductivity and

HIV/AIDS and time allocation in rural Malawi

Directory of Open Access Journals (Sweden)

Simona Bignami-Van Assche

2011-05-01

Full Text Available AIDS morbidity and mortality are expected to have a large impact on households' labor supply in rural Malawi since they reduce the time that adults can spend on production for subsistence and on income generating activities. However, the data demands for estimating this impact are high, limiting the amount of empirical evidence. In this paper, we utilize a unique combination of quantitative and qualitative data, including biomarkers for HIV, collected by the Malawi Diffusion and Ideational Change Project, to analyze the impact of AIDS-related morbidity and mortality on time allocation decisions for rural Malawians. We evaluate both the direct effect of HIV/AIDS on the time allocation of affected individuals as well as its indirect effect on the time allocation of surviving household members. We find that the latter is the most important effect of AIDS-related morbidity and mortality, especially on women's time. Specifically, AIDS induces diversification of income sources, with women reallocating their time from work-intensive (typically farming and heavy chores to cash-generating tasks (such as casual labor.

How can we investigate the effects of small amounts of toxic substances?

International Nuclear Information System (INIS)

Taylor, D.M.

1991-01-01

Today there is increasing concern about the possible toxic effects of tiny amounts of toxic substances in the environment of workplace. Because the incidence of effects at such levels of toxic material is likely to be very low their investigation becomes very difficult and will require new approaches to toxicological research. Only through the use of in vitro cell systems and the most modern theoretical and experimental methods in biochemistry, chemistry and molecular biolgoy can we hope to elucidate the mechanisms underlying the causation and expression of environmentally-induced diseases. Much of this research will be at the fundamental level but it must be so oriented that the information obtained is directly applicable to the realistic estimation of the risks to mankind and other living creatures from natural and man made toxicants. (orig.) [de

76 FR 59138 - Medicare Program; Medicare Appeals; Adjustment to the Amount in Controversy Threshold Amounts for...

Science.gov (United States)

2011-09-23

... Administrative Law Judge (ALJ) hearings and judicial review under the Medicare appeals process. The adjustment to the AIC threshold amounts will be effective for requests for ALJ hearings and judicial review filed on... $1,350 for judicial review. DATES: Effective Date: This notice is effective on January 1, 2012. FOR...

78 FR 59702 - Medicare Program; Medicare Appeals: Adjustment to the Amount in Controversy Threshold Amounts for...

Science.gov (United States)

2013-09-27

... Administrative Law Judge (ALJ) hearings and judicial review under the Medicare appeals process. The adjustment to the AIC threshold amounts will be effective for requests for ALJ hearings and judicial review filed on... ALJ hearings and $1,430 for judicial review. DATES: This notice is effective on January 1, 2014. FOR...

77 FR 59618 - Medicare Program; Medicare Appeals; Adjustment to the Amount in Controversy Threshold Amounts for...

Science.gov (United States)

2012-09-28

... Administrative Law Judge (ALJ) hearings and judicial review under the Medicare appeals process. The adjustment to the AIC threshold amounts will be effective for requests for ALJ hearings and judicial review filed on... $1,400 for judicial review. Effective Date: This notice is effective on January 1, 2013. FOR FURTHER...

Collision recognition and direction changes for small scale fish robots by acceleration sensors

Science.gov (United States)

Na, Seung Y.; Shin, Daejung; Kim, Jin Y.; Lee, Bae-Ho

2005-05-01

Typical obstacles are walls, rocks, water plants and other nearby robots for a group of small scale fish robots and submersibles that have been constructed in our lab. Sonar sensors are not employed to make the robot structure simple enough. All of circuits, sensors and processor cards are contained in a box of 9 x 7 x 4 cm dimension except motors, fins and external covers. Therefore, image processing results are applied to avoid collisions. However, it is useful only when the obstacles are located far enough to give images processing time for detecting them. Otherwise, acceleration sensors are used to detect collision immediately after it happens. Two of 2-axes acceleration sensors are employed to measure the three components of collision angles, collision magnitudes, and the angles of robot propulsion. These data are integrated to calculate the amount of propulsion direction change. The angle of a collision incident upon an obstacle is the fundamental value to obtain a direction change needed to design a following path. But there is a significant amount of noise due to a caudal fin motor. Because caudal fin provides the main propulsion for a fish robot, there is a periodic swinging noise at the head of a robot. This noise provides a random acceleration effect on the measured acceleration data at the collision. We propose an algorithm which shows that the MEMS-type accelerometers are very effective to provide information for direction changes in spite of the intrinsic noise after the small scale fish robots have made obstacle collision.

Time-resolved cathodoluminescence microscopy with sub-nanosecond beam blanking for direct evaluation of the local density of states

NARCIS (Netherlands)

Moerland, R.J.; Weppelman, I.G.C.; Garming, M.W.H.; Kruit, P.; Hoogenboom, J.P.

2016-01-01

We show cathodoluminescence-based time-resolved electron beam spectroscopy in order to directly probe the spontaneous emission decay rate that is modified by the local density of states in a nanoscale environment. In contrast to dedicated laser-triggered electron-microscopy setups, we use commercial

33 CFR 135.203 - Amount required.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Amount required. 135.203 Section 135.203 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE POLLUTION FINANCIAL RESPONSIBILITY AND COMPENSATION OFFSHORE OIL POLLUTION COMPENSATION FUND...

Direct atomic absorption determination of silicon in metallic niobium

International Nuclear Information System (INIS)

Blinova, Eh.S.; Guzeev, I.D.; Nedler, V.V.; Khokhrin, V.M.

1984-01-01

Consideration is being given to realization of the basic advantage of non-flame atomizer-analysis of directly solid samples-for silicon determination in niobium for the content of the first one of less than 1x10 -3 mass %. Analysis technique is described. Diagrams of the dependences of atomic silicon absorption in graphite cells of usual type as well as lined by tungsten carbide and atomic silicon absorption on the value of niobium weighed amount are presented. It is shown that Si determination in metallic niobium according to aqueous reference solutions results in understatement of results 2.4 times. The optimal conditions for Si determination in niobium are the following: 2400 deg C temperature, absence of carbon and oxygen. Different niobium specimens with the known silicon content were used as reference samples

Comparison of the Amount of Time Spent on Computer Games and Aggressive Behavior in Male Middle School Students of Tehran

Directory of Open Access Journals (Sweden)

Mehrangiz Shoaa Kazemi

2016-12-01

Full Text Available Background and Objectives: Modern technologies have a prominent role in adolescent's daily life. These technologies include specific cultural and moral patterns, which could be highly effective on adolescents. This research aimed at comparing the amount of time spent on computer games and aggressive behavior in male middle school students of Tehran. Materials and Methods: This study had a descriptive design. The study population included all male students of middle school of Tehran, and the sample included 120 male students, of which 60 were dependent on computer games with aggressive behavior and 60 were non-dependent on computer games with normal behavior; the sample was randomly selected from Tehran regions (south, north, west, and east regions with random multi-stage sampling. Data were gathered using questionnaires, including Aggressive Questionnaire (AGQ and a researcher-made questionnaire consisting of 10 multiple questions that measure the use or non-use of computer games. Data were analyzed using SPSS-19 statistical software. For data analysis, Pearson correlation and t test were used. Results: The results showed that there was a meaningful relationship between computer gaming and aggressive behavior and also between duration of using computer games and aggressive behaviors (P <0.05. Conclusions: According to the results, it seems that children could be kept safe from the adverse effects of computer games by controlling the duration and the type of the games that they play.

Direct write of copper-graphene composite using micro-cold spray

Directory of Open Access Journals (Sweden)

Sameh Dardona

2016-08-01

Full Text Available Direct write of a new class of composite materials containing copper and graphene in the powder phase is described. The composite was synthesized using batch electroless plating of copper for various times onto Nano Graphene Platelets (NGP to control the amount of copper deposited within the loosely aggregated graphene powder. Copper deposition was confirmed by both Focused Ion Beam (FIB and Auger electron spectroscopic analysis. A micro-cold spray technique was used to deposit traces that are ∼230 μm wide and ∼5 μm thick of the formulated copper/graphene powder onto a glass substrate. The deposited traces were found to have good adhesion to the substrate with ∼65x the copper bulk resistivity.

Prognostic Impact of Visceral Fat Amount and Branched-Chain Amino Acids (BCAA) in Hepatocellular Carcinoma.

Science.gov (United States)

Higashi, Takaaki; Hayashi, Hiromitsu; Kaida, Takayoshi; Arima, Kota; Takeyama, Hideaki; Taki, Katsunobu; Izumi, Daisuke; Tokunaga, Ryuma; Kosumi, Keisuke; Nakagawa, Shigeki; Okabe, Hirohisa; Imai, Katsunobu; Nitta, Hidetoshi; Hashimoto, Daisuke; Chikamoto, Akira; Beppu, Toru; Baba, Hideo

2015-12-01

Dysregulation of lipid and amino acid metabolism in patients with liver diseases results in obesity-related carcinogenesis and decreased levels of branched-chain amino acids (BCAA), respectively. This study assessed the clinical and prognostic impact of visceral fat amount (VFA) and its association with amino acid metabolism in patients with hepatocellular carcinoma (HCC). In this study, 215 patients who underwent hepatic resection for HCC were divided into two groups based on VFA criteria for metabolic abnormalities in Japan. Computed tomography was used to measure VFA at the third lumbar vertebra in the inferior direction. Of the 215 patients, 132 had high and 83 had low VFA. High VFA was significantly associated with older age and higher body mass index (BMI), subcutaneous fat amount, and BCAA, but not with liver function, nutrient status, or tumoral factors. VFA was positively correlated with BMI (P BCAA levels (P BCAA, serum albumin, and prognostic nutritional index were not. High VFA was associated with a high BCAA level, with high VFA prognostic of improved overall survival in Japanese patients with HCC.

Turnover Time

Science.gov (United States)

Ecosystems contain energy and materials such as carbon, nitrogen, phosphorus, and water, and are open to their flow-through. Turnover time refers to the amount of time required for replacement by flow-through of the energy or substance of interest contained in the system, and is ...

An experimental test of the habitat-amount hypothesis for saproxylic beetles in a forested region.

Science.gov (United States)

Seibold, Sebastian; Bässler, Claus; Brandl, Roland; Fahrig, Lenore; Förster, Bernhard; Heurich, Marco; Hothorn, Torsten; Scheipl, Fabian; Thorn, Simon; Müller, Jörg

2017-06-01

The habitat-amount hypothesis challenges traditional concepts that explain species richness within habitats, such as the habitat-patch hypothesis, where species number is a function of patch size and patch isolation. It posits that effects of patch size and patch isolation are driven by effects of sample area, and thus that the number of species at a site is basically a function of the total habitat amount surrounding this site. We tested the habitat-amount hypothesis for saproxylic beetles and their habitat of dead wood by using an experiment comprising 190 plots with manipulated patch sizes situated in a forested region with a high variation in habitat amount (i.e., density of dead trees in the surrounding landscape). Although dead wood is a spatio-temporally dynamic habitat, saproxylic insects have life cycles shorter than the time needed for habitat turnover and they closely track their resource. Patch size was manipulated by adding various amounts of downed dead wood to the plots (~800 m³ in total); dead trees in the surrounding landscape (~240 km 2 ) were identified using airborne laser scanning (light detection and ranging). Over 3 yr, 477 saproxylic species (101,416 individuals) were recorded. Considering 20-1,000 m radii around the patches, local landscapes were identified as having a radius of 40-120 m. Both patch size and habitat amount in the local landscapes independently affected species numbers without a significant interaction effect, hence refuting the island effect. Species accumulation curves relative to cumulative patch size were not consistent with either the habitat-patch hypothesis or the habitat-amount hypothesis: several small dead-wood patches held more species than a single large patch with an amount of dead wood equal to the sum of that of the small patches. Our results indicate that conservation of saproxylic beetles in forested regions should primarily focus on increasing the overall amount of dead wood without considering its

THE ANALYSIS OF THE TIME-SERIES FLUCTUATION OF WATER DEMAND FOR THE SMALL WATER SUPPLY BLOCK

Science.gov (United States)

Koizumi, Akira; Suehiro, Miki; Arai, Yasuhiro; Inakazu, Toyono; Masuko, Atushi; Tamura, Satoshi; Ashida, Hiroshi

The purpose of this study is to define one apartment complex as "the water supply block" and to show the relationship between the amount of water supply for an apartment house and its time series fluctuation. We examined the observation data which were collected from 33 apartment houses. The water meters were installed at individual observation points for about 20 days in Tokyo. This study used Fourier analysis in order to grasp the irregularity in a time series data. As a result, this paper demonstrated that the smaller the amount of water supply became, the larger irregularity the time series fluctuation had. We also found that it was difficult to describe the daily cyclical pattern for a small apartment house using the dominant periodic components which were obtained from a Fourier spectrum. Our research give useful information about the design for a directional water supply system, as to making estimates of the hourly fluctuation and the maximum daily water demand.

Direct medical costs of motorcycle crashes in Ontario.

Science.gov (United States)

Pincus, Daniel; Wasserstein, David; Nathens, Avery B; Bai, Yu Qing; Redelmeier, Donald A; Wodchis, Walter P

2017-11-20

There is no reliable estimate of costs incurred by motorcycle crashes. Our objective was to calculate the direct costs of all publicly funded medical care provided to individuals after motorcycle crashes compared with automobile crashes. We conducted a population-based, matched cohort study of adults in Ontario who presented to hospital because of a motorcycle or automobile crash from 2007 through 2013. For each case, we identified 1 control absent a motor vehicle crash during the study period. Direct costs for each case and control were estimated in 2013 Canadian dollars from the payer perspective using methodology that links health care use to individuals over time. We calculated costs attributable to motorcycle and automobile crashes within 2 years using a difference-in-differences approach. We identified 26 831 patients injured in motorcycle crashes and 281 826 injured in automobile crashes. Mean costs attributable to motorcycle and automobile crashes were $5825 and $2995, respectively ( p motorcycle crashes compared with automobile crashes (2194 injured annually/100 000 registered motorcycles v. 718 injured annually/100 000 registered automobiles; incidence rate ratio [IRR] 3.1, 95% confidence interval [CI] 2.8 to 3.3, p motorcycles v. 12 severe injuries annually/100 000 registered automobiles; IRR 10.4, 95% CI 8.3 to 13.1, p motorcycle in Ontario costs the public health care system 6 times the amount of each registered automobile. Medical costs may provide an additional incentive to improve motorcycle safety. © 2017 Joule Inc. or its licensors.

41 CFR 301-71.307 - How do we collect the amount of a travel advance in excess of the amount of travel expenses...

Science.gov (United States)

2010-07-01

... amount of a travel advance in excess of the amount of travel expenses substantiated by the employee? 301-71.307 Section 301-71.307 Public Contracts and Property Management Federal Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES AGENCY RESPONSIBILITIES 71-AGENCY TRAVEL ACCOUNTABILITY REQUIREMENTS...

Analysis of writing inks on paper using direct analysis in real time mass spectrometry.

Science.gov (United States)

Jones, Roger W; McClelland, John F

2013-09-10

Ink analysis is central to questioned document examination. We applied direct analysis in real time mass spectrometry (DART MS) to ballpoint, gel, and fluid writing ink analysis. DART MS acquires the mass spectrum of an ink while it is still on a document without altering the appearance of the document. Spectra were acquired from ink on a variety of papers, and the spectrum of the blank paper could be subtracted out to produce a cleanly isolated ink spectrum in most cases. Only certain heavy or heavily processed papers interfered. The time since an ink is written on paper has a large effect on its spectrum. DART spectra change radically during the first few months after an ink is written as the more volatile components evaporate, but the spectra stabilize after that. A library-search study involving 166 well-aged inks assessed the ability to identify inks from their DART spectra. The aggregate success rate was 92%. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Several companies will not be able to earn amounts necessary to meet strictest European Union standards

International Nuclear Information System (INIS)

Zackova, K.; Sobinkovic, B.

2003-01-01

Costs of meeting environmental laws, regulations and directives applying to industrial companies are relatively high. Some companies are therefore concerned that they will not be in the position to accumulate sufficient funds to meet the requirements of newly introduced legislation reflecting the European Union (EU) environmental standards. And those plants that will not manage to comply with the new regulation by the set deadline, will face a threat of being closed down. In some cases the threat will be softened by transition periods agreed on in course of pre-entry negotiations on the chapter environment and through time schedules provided for in the newly introduced regulations. Danish consultant company Niras in co-operation with Institute of Slovak and World Economy at SAV (Slovak Academy of Science) calculated that the costs related to implementation EU environmental standards by 2035 would amount to 437 bn Slovak crowns (Sk) (10.57 billion Euro). Chief Negotiator of Slovakia's EU-entry, Jan Figel confirmed that from financial point of view the implementation of environmental standards was the most demanding requirement of all. Experts cannot predict yet what part of these costs will be covered by companies themselves. The highest amount should be spent on water protection - 185 billion Sk (4.47 billion Euro) until 2030. In the waste disposal industry the necessary investments during the same period are estimated to 130 billion Sk (3.14 billion Euro) and another 90 billion Sk (2.18 billion Euro) will have to be spent on big incineration facilities. The mentioned amount of 437 billion Sk (10.57 billion Euro) does not include any costs related to liquidation of old environmental burdens. But this problem will be partially solved through the new environmental arrangements. Several industrial companies are not allowed to build new waste dumps as long as they have not liquidated the old ones or at leas have addressed the matter of contaminated soil. There is no

Time Investment and Time Management: An Analysis of Time Students Spend Working at Home for School

Science.gov (United States)

Wagner, Petra; Schober, Barbara; Spiel, Christiane

2008-01-01

This paper deals with the time students spend working at home for school. In Study 1, we investigated amount and regulation of time. Study 2 serves to validate the results of Study 1 and, in addition, investigates the duration of the time units students used and their relation to scholastic success. In Study 1, the participants were 332 students…

20 CFR 362.12 - Computation of amount of reimbursement.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Computation of amount of reimbursement. 362.12 Section 362.12 Employees' Benefits RAILROAD RETIREMENT BOARD INTERNAL ADMINISTRATION, POLICY AND... the cost of repair is the amount payable. (b) Depreciation in value of an item of personal property is...

Consumption of cosmetic products by the French population. Third part: Product exposure amount.

Science.gov (United States)

Dornic, N; Ficheux, A S; Roudot, A C

2017-08-01

A recent study in France provided valuable data on the frequency and amount of use of cosmetic products (Ficheux et al., 2015, 2016a). The aim of the present study was to generate Product Exposure Amount data, i.e. the amounts of cosmetics applied to the skin among the French population using the raw data collected during the previous enquiry. These data are useful to derive Consumer exposure level data which are paramount for skin sensitization risk assessments. Exposure data were generated for 69 different cosmetics, classified as products for the hair, face, buccal hygiene, hands, feet, body, shaving and depilation, sunscreens as well as products specifically intended for babies. Exposure was calculated using a probabilistic Monte Carlo method. The main strength of this work was the break-down of data by age and sex. The results showed that some data used by the International Fragrance Association in skin sensitization risk assessments, in particular facial care products and deodorants, could be unsuitable for the protection of French consumers. For the first time, data were also generated for products intended for babies' nappy area. These data will be useful for the implementation of the Quantitative Risk Assessment for skin sensitization among the French population. Copyright © 2017 Elsevier Ltd. All rights reserved.

Increasing the amount of payment to research subjects

Science.gov (United States)

Resnick, DB

2014-01-01

This article discusses some ethical issues that can arise when researchers decide to increase the amount of payment offered to research subjects to boost enrollment. Would increasing the amount of payment be unfair to subjects who have already consented to participate in the study? This article considers how five different models of payment—the free market model, the wage payment model, the reimbursement model, the appreciation model, and the fair benefits model—would approach this issue. The article also considers several practical problems related to changing the amount of payment, including determining whether there is enough money in the budget to offer additional payments to subjects who have already enrolled, ascertaining how difficult it will be to re-contact subjects, and developing a plan of action for responding to subjects who find out they are receiving less money and demand an explanation. PMID:18757614

Training for the future NHS: training junior doctors in the United Kingdom within the 48-hour European working time directive.

Science.gov (United States)

Datta, Shreelatta T; Davies, Sally J

2014-01-01

Since August 2009, the National Health Service of the United Kingdom has faced the challenge of delivering training for junior doctors within a 48-hour working week, as stipulated by the European Working Time Directive and legislated in the UK by the Working Time Regulations 1998. Since that time, widespread concern has been expressed about the impact of restricted duty hours on the quality of postgraduate medical training in the UK, particularly in the "craft" specialties--that is, those disciplines in which trainees develop practical skills that are best learned through direct experience with patients. At the same time, specialist training in the UK has experienced considerable change since 2007 with the introduction of competency-based specialty curricula, workplace-based assessment, and the annual review of competency progression. The challenges presented by the reduction of duty hours include increased pressure on doctors-in-training to provide service during evening and overnight hours, reduced interaction with supervisors, and reduced opportunities for learning. This paper explores these challenges and proposes potential responses with respect to the reorganization of training and service provision.

Reading: Time

NARCIS (Netherlands)

Annemarie Wennekers; Frank Huysmans; Jos de Haan

2018-01-01

Original title: Lees:Tijd The amount of time that Dutch people spend reading has been declining steadily since the 1950s. This decline in reading time contrasts starkly with the positive personal and social benefits that can be derived from reading, according to lots of research. The Reading:

Electrodeposition of milligram amounts of uranium on electropolished stainless steel disks

International Nuclear Information System (INIS)

Aggarwal, S.K.; Shah, P.M.; Duggal, R.K.; Jain, H.C.

1991-01-01

Investigations have been carried out for the electrodeposition of milligram amounts of uranium on electropolished stainless steel disks with an objective of preparing good quality sources for α-spectrometric studies on uranium. The parameters studied include the vatiation of electrodeposition yield as a function of voltage, time, distance between the cathode and anode, and the volume of 0.2M ammonium oxalate solution. The conditions selected for preparing good quality sources with nearly 100% yield were: electrodeposition voltage 25 V, time of deposition 15 min, volume of 0.2M ammonium oxalate solution in the cell 4 ml and a distance of 2 cm between the cathode and anode. The sources prepared using this method have been used successfully for the α-spectrometric determination of 234 U/ 238 U ratios in uranium samples. (author) 6 refs.; 4 figs

Time-dependent wave-packet study of the direct low-energy dissociative recombination of HD+

International Nuclear Information System (INIS)

Orel, A. E.

2000-01-01

Wave-packet methods involving the numerical solution of the time-dependent Schroedinger equation have been used with great success in the calculation of cross sections for dissociative recombination of molecular ions by electron impact in the high energy region where the ''boomerang'' model [L. Dube and A. Herzenberg, Phys. Rev. A 11, 1314 (1975)] is valid. We extend this method to study low-energy dissociative recombination where this approximation is no longer appropriate. We apply the method to the ''direct'' low-energy dissociative recombination of HD + . Our results are in excellent agreement with calculations using the multichannel quantum defect method. (c) 2000 The American Physical Society

42 CFR 438.704 - Amounts of civil money penalties.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Amounts of civil money penalties. 438.704 Section... SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS MANAGED CARE Sanctions § 438.704 Amounts of civil money penalties. (a) General rule. The limit on, or the maximum civil money penalty the State may impose varies...

Gigahertz repetition rate, sub-femtosecond timing jitter optical pulse train directly generated from a mode-locked Yb:KYW laser.

Science.gov (United States)

Yang, Heewon; Kim, Hyoji; Shin, Junho; Kim, Chur; Choi, Sun Young; Kim, Guang-Hoon; Rotermund, Fabian; Kim, Jungwon

2014-01-01

We show that a 1.13 GHz repetition rate optical pulse train with 0.70 fs high-frequency timing jitter (integration bandwidth of 17.5 kHz-10 MHz, where the measurement instrument-limited noise floor contributes 0.41 fs in 10 MHz bandwidth) can be directly generated from a free-running, single-mode diode-pumped Yb:KYW laser mode-locked by single-wall carbon nanotube-coated mirrors. To our knowledge, this is the lowest-timing-jitter optical pulse train with gigahertz repetition rate ever measured. If this pulse train is used for direct sampling of 565 MHz signals (Nyquist frequency of the pulse train), the jitter level demonstrated would correspond to the projected effective-number-of-bit of 17.8, which is much higher than the thermal noise limit of 50 Ω load resistance (~14 bits).

An analysis of periodic solutions of bi-directional associative memory networks with time-varying delays

International Nuclear Information System (INIS)

Cao Jinde; Jiang Qiuhao

2004-01-01

In this Letter, several sufficient conditions are derived for the existence and uniqueness of periodic oscillatory solution for bi-directional associative memory (BAM) networks with time-varying delays by employing a new Lyapunov functional and an elementary inequality, and all other solutions of the BAM networks converge exponentially to the unique periodic solution. These criteria are presented in terms of system parameters and have important leading significance in the design and applications of periodic neural circuits for delayed BAM. As an illustration, two numerical examples are worked out using the results obtained

Re-inventing electromagnetics - Supercomputing solution of Maxwell's equations via direct time integration on space grids

International Nuclear Information System (INIS)

Taflove, A.

1992-01-01

This paper summarizes the present state and future directions of applying finite-difference and finite-volume time-domain techniques for Maxwell's equations on supercomputers to model complex electromagnetic wave interactions with structures. Applications so far have been dominated by radar cross section technology, but by no means are limited to this area. In fact, the gains we have made place us on the threshold of being able to make tremendous contributions to non-defense electronics and optical technology. Some of the most interesting research in these commercial areas is summarized. 47 refs

Polymer Directed Protein Assemblies

Directory of Open Access Journals (Sweden)

Patrick van Rijn

2013-05-01

Full Text Available Protein aggregation and protein self-assembly is an important occurrence in natural systems, and is in some form or other dictated by biopolymers. Very obvious influences of biopolymers on protein assemblies are, e.g., virus particles. Viruses are a multi-protein assembly of which the morphology is dictated by poly-nucleotides namely RNA or DNA. This “biopolymer” directs the proteins and imposes limitations on the structure like the length or diameter of the particle. Not only do these bionanoparticles use polymer-directed self-assembly, also processes like amyloid formation are in a way a result of directed protein assembly by partial unfolded/misfolded biopolymers namely, polypeptides. The combination of proteins and synthetic polymers, inspired by the natural processes, are therefore regarded as a highly promising area of research. Directed protein assembly is versatile with respect to the possible interactions which brings together the protein and polymer, e.g., electrostatic, v.d. Waals forces or covalent conjugation, and possible combinations are numerous due to the large amounts of different polymers and proteins available. The protein-polymer interacting behavior and overall morphology is envisioned to aid in clarifying protein-protein interactions and are thought to entail some interesting new functions and properties which will ultimately lead to novel bio-hybrid materials.

Diagnostic imaging of small amounts of pleural fluid: pleural effusion vs. physiologic pleural fluid.

Science.gov (United States)

Kocijancic, Igor

2007-12-01

The aim of this article is to present an overview of our 10 years clinical research work and early clinical experience with small pleural effusions. Small amounts of pleural fluid are severely difficult to identify with imaging methods (chest x-rays and ultrasound). Nevertheless, it may be an important finding, sometimes leading to a definitive diagnosis of pleural carcinomatosis, infection or other pathologic condition. Chest x-rays were used for many years for the diagnosis of small pleural effusions. Lateral decubitus chest radiographs represented a gold standard for imaging of small amounts of plural fluid for more than 80 years. In the last two decades, ultrasonography of pleural space became a leading real-time method for demonstrating small pleural effusions. Furthermore, the advent of sonographic technology actually enables detection of physiologic pleural fluid in some otherwise healthy individuals. In conclusion, new definitions of the key terms in the field of diagnostic imaging of small amounts of pleural fluid seem to be justified. We suggest that the term pleural fluid should determine physiologic pleural space condition while the term pleural effusion should only be used in the cases of pleural involvement or pleural illness.

Influence of injection timing on the exhaust emissions of a dual-fuel CI engine

Energy Technology Data Exchange (ETDEWEB)

Sayin, Cenk [Department of Mechanical Education, Marmara University, 34722 Istanbul (Turkey); Uslu, Kadir [Department of Automotive Education, Fatih Vocational High School, 54100 Sakarya (Turkey); Canakci, Mustafa [Department of Mechanical Education, Kocaeli University, 41380 Kocaeli (Turkey); Alternative Fuels R and D Center, Kocaeli University, 41040 Kocaeli (Turkey)

2008-06-15

Environmental concerns and limited amount of petroleum fuels have caused interests in the development of alternative fuels for internal combustion (IC) engines. As an alternative, biodegradable, and renewable fuel, ethanol is receiving increasing attention. Therefore, in this study, influence of injection timing on the exhaust emission of a single cylinder, four stroke, direct injection, naturally aspirated diesel engine has been experimentally investigated using ethanol blended diesel fuel from 0% to 15% with an increment of 5%. The engine has an original injection timing 27 CA BTDC. The tests were performed at five different injection timings (21 , 24 , 27 , 30 , and 33 CA BTDC) by changing the thickness of advance shim. The experimental test results showed that NO{sub x} and CO{sub 2} emissions increased as CO and HC emissions decreased with increasing amount of ethanol in the fuel mixture. When compared to the results of original injection timing, at the retarded injection timings (21 and 24 CA BTDC), NO{sub x} and CO{sub 2} emissions increased, and unburned HC and CO emissions decreased for all test conditions. On the other hand, with the advanced injection timings (30 and 33 CA BTDC), HC and CO emissions diminished, and NO{sub x} and CO{sub 2} emissions boosted for all test conditions. (author)

Secure and Time-Aware Communication of Wireless Sensors Monitoring Overhead Transmission Lines.

Science.gov (United States)

Mazur, Katarzyna; Wydra, Michal; Ksiezopolski, Bogdan

2017-07-11

Existing transmission power grids suffer from high maintenance costs and scalability issues along with a lack of effective and secure system monitoring. To address these problems, we propose to use Wireless Sensor Networks (WSNs) as a technology to achieve energy efficient, reliable, and low-cost remote monitoring of transmission grids. With WSNs, smart grid enables both utilities and customers to monitor, predict and manage energy usage effectively and react to possible power grid disturbances in a timely manner. However, the increased application of WSNs also introduces new security challenges, especially related to privacy, connectivity, and security management, repeatedly causing unpredicted expenditures. Monitoring the status of the power system, a large amount of sensors generates massive amount of sensitive data. In order to build an effective Wireless Sensor Network (WSN) for a smart grid, we focus on designing a methodology of efficient and secure delivery of the data measured on transmission lines. We perform a set of simulations, in which we examine different routing algorithms, security mechanisms and WSN deployments in order to select the parameters that will not affect the delivery time but fulfill their role and ensure security at the same time. Furthermore, we analyze the optimal placement of direct wireless links, aiming at minimizing time delays, balancing network performance and decreasing deployment costs.

29 CFR 530.302 - Amounts of civil money penalties.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Amounts of civil money penalties. 530.302 Section 530.302... EMPLOYMENT OF HOMEWORKERS IN CERTAIN INDUSTRIES Civil Money Penalties § 530.302 Amounts of civil money penalties. (a) A civil money penalty, not to exceed $500 per affected homeworker for any one violation, may...

Fast analysis of glycosides based on HKUST-1-coated monolith solid-phase microextraction and direct analysis in real-time mass spectrometry.

Science.gov (United States)

Li, Xianjiang; Wang, Xin; Ma, Wen; Ai, Wanpeng; Bai, Yu; Ding, Li; Liu, Huwei

2017-04-01

Glycosides are a kind of highly important natural aromatic precursors in tobacco leaves. In this study, a novel HKUST-1-coated monolith dip-it sampler was designed for the fast and sensitive analysis of trace glycosides using direct analysis in real-time mass spectrometry. This device was prepared in two steps: in situ polymerization of monolith in a glass capillary of dip-it and layer-by-layer growth of HKUST-1 on the surface of monolith. Sufficient extraction was realized by immersing the tip to solution and in situ desorption was carried out by plasma direct analysis in real time. Compared with traditional solid-phase microextraction protocols, sample desorption was not needed anymore, and only extraction conditions were needed to be optimized in this method, including the gas temperature of direct analysis in real time, extraction time, and CH 3 COONH 4 additive concentration. This method enabled the simultaneous detection of six kinds of glycosides with the limits of detection of 0.02-0.05 μg/mL and the linear ranges covering two orders of magnitude with the limits of quantitation of 0.05-0.1 μg/mL. Moreover, the developed method was applied for the glycosides analysis of three tobacco samples, which only took about 2 s for every sample. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Directional Networking in GPS Denied Environments - Time Synchronization

Science.gov (United States)

2016-03-14

RF-based measurements to synchronize time and measure node range.  Satellite Doppler: Using Doppler measurements from multiple satellites along...with satellite catalog data to determine time and position.  LTE : Use existing LTE base-stations for time and position.  Differential GPS: A...Opportunistic Signals: Opportunistically take advantage of existing RF signals (i.e., FM radio, DTV, LTE , etc.) transmitted from known locations

Obtaining accurate amounts of mercury from mercury compounds via electrolytic methods

Science.gov (United States)

Grossman, M.W.; George, W.A.

1987-07-07

A process is described for obtaining pre-determined, accurate rate amounts of mercury. In one embodiment, predetermined, precise amounts of Hg are separated from HgO and plated onto a cathode wire. The method for doing this involves dissolving a precise amount of HgO which corresponds to a pre-determined amount of Hg desired in an electrolyte solution comprised of glacial acetic acid and H[sub 2]O. The mercuric ions are then electrolytically reduced and plated onto a cathode producing the required pre-determined quantity of Hg. In another embodiment, pre-determined, precise amounts of Hg are obtained from Hg[sub 2]Cl[sub 2]. The method for doing this involves dissolving a precise amount of Hg[sub 2]Cl[sub 2] in an electrolyte solution comprised of concentrated HCl and H[sub 2]O. The mercurous ions in solution are then electrolytically reduced and plated onto a cathode wire producing the required, pre-determined quantity of Hg. 1 fig.

The significance of duration and amount of sodium reduction intervention in normotensive and hypertensive individuals

DEFF Research Database (Denmark)

Graudal, Niels; Hubeck-Graudal, Thorbjørn; Jürgens, Gesche

2015-01-01

The purpose of this meta-analysis was to establish the time for achievement of maximal blood pressure (BP) efficacy of a sodium reduction (SR) intervention and the relation between the amount of SR and the BP response in individuals with hypertension and normal BP. Relevant studies were retrieved.......12, P policy of sodium reduction....

Personalized direct marketing using digital publishing

Science.gov (United States)

Kutty, Cheeniyil L.; Prabhakaran, Jayasree K.

2006-02-01

In today's cost-conscious business climate, marketing and customer service decision makers are increasingly concerned with how to increase customer response and retention rates. Companies spend large amounts of money on Customer Relationship Management (CRM) solutions and data acquisition but they don't know how to use the information stored in these systems to improve the effectiveness of their direct marketing campaigns. By leveraging the customer information they already have, companies can create personalized, printed direct mail programs that generate high response rates, greater returns, and stronger customer loyalty, while gaining a significant edge over their competitors. To reach the promised land of one-to-one direct marketing (personalized direct marketing - PDM), companies need an end-to-end solution for creating, managing, printing, and distributing personalized direct mail "on demand." Having access to digital printing is just one piece of the solution. A more complete approach includes leveraging personalization technology into a useful direct marketing tool that provides true one-to-one marketing, allowing variable images and text in a personalized direct mail. This paper discusses integration of CRM with a Print-on-Demand solution so as to create truly personalized printed marketing campaigns for one or many individuals based on the profile information, preferences and purchase history stored in the CRM.

Exhaust gas concentration of CNG fuelled direct injection engine at MBT timing

International Nuclear Information System (INIS)

Hassan, M.K.; Aris, I.; Mahmod, S.; Sidek, R.

2009-01-01

Full text: This paper presents an experimental result of exhaust gas concentration of high compression engine fuelled with compressed natural gas (CNG) at maximum brake torque (MBT). The engine uses central direct injection (DI) technique to inject the CNG into the cylinder. The engine geometry bases on gasoline engine with 14:1 compression ratio and called CNGDI engine. The injectors are positioned within a certain degrees of spark plug location. The objective of the experiment is to study the influence and significant of MBT timing in CNGDI engine towards exhaust gases. The experimental tests were carried out using computer-controlled eddy-current dynamometer, which measures the CNGDI engine performance. At MBT region, exhaust gas concentration as such CO, HC, NO x , O 2 and CO 2 , were recorded and analyzed during the test using the Horiba analyzer. A closed loop wide band lambda sensor has been mounted at the exhaust manifold to indicate the oxygen level during the exercise. (author)

Modelling rainfall amounts using mixed-gamma model for Kuantan district

Science.gov (United States)

Zakaria, Roslinazairimah; Moslim, Nor Hafizah

2017-05-01

An efficient design of flood mitigation and construction of crop growth models depend upon good understanding of the rainfall process and characteristics. Gamma distribution is usually used to model nonzero rainfall amounts. In this study, the mixed-gamma model is applied to accommodate both zero and nonzero rainfall amounts. The mixed-gamma model presented is for the independent case. The formulae of mean and variance are derived for the sum of two and three independent mixed-gamma variables, respectively. Firstly, the gamma distribution is used to model the nonzero rainfall amounts and the parameters of the distribution (shape and scale) are estimated using the maximum likelihood estimation method. Then, the mixed-gamma model is defined for both zero and nonzero rainfall amounts simultaneously. The formulae of mean and variance for the sum of two and three independent mixed-gamma variables derived are tested using the monthly rainfall amounts from rainfall stations within Kuantan district in Pahang Malaysia. Based on the Kolmogorov-Smirnov goodness of fit test, the results demonstrate that the descriptive statistics of the observed sum of rainfall amounts is not significantly different at 5% significance level from the generated sum of independent mixed-gamma variables. The methodology and formulae demonstrated can be applied to find the sum of more than three independent mixed-gamma variables.

Statistical characteristic in time-domain of direct current corona-generated audible noise from conductor in corona cage

Energy Technology Data Exchange (ETDEWEB)

Li, Xuebao, E-mail: lxb08357x@ncepu.edu.cn; Cui, Xiang, E-mail: x.cui@ncepu.edu.cn; Ma, Wenzuo; Bian, Xingming; Wang, Donglai [State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources, North China Electric Power University, Beijing 102206 (China); Lu, Tiebing, E-mail: tiebinglu@ncepu.edu.cn [Beijing Key Laboratory of High Voltage and EMC, North China Electric Power University, Beijing 102206 (China); Hiziroglu, Huseyin [Department of Electrical and Computer Engineering, Kettering University, Flint, Michigan 48504 (United States)

2016-03-15

The corona-generated audible noise (AN) has become one of decisive factors in the design of high voltage direct current (HVDC) transmission lines. The AN from transmission lines can be attributed to sound pressure pulses which are generated by the multiple corona sources formed on the conductor, i.e., transmission lines. In this paper, a detailed time-domain characteristics of the sound pressure pulses, which are generated by the DC corona discharges formed over the surfaces of a stranded conductors, are investigated systematically in a laboratory settings using a corona cage structure. The amplitude of sound pressure pulse and its time intervals are extracted by observing a direct correlation between corona current pulses and corona-generated sound pressure pulses. Based on the statistical characteristics, a stochastic model is presented for simulating the sound pressure pulses due to DC corona discharges occurring on conductors. The proposed stochastic model is validated by comparing the calculated and measured A-weighted sound pressure level (SPL). The proposed model is then used to analyze the influence of the pulse amplitudes and pulse rate on the SPL. Furthermore, a mathematical relationship is found between the SPL and conductor diameter, electric field, and radial distance.

Statistical characteristic in time-domain of direct current corona-generated audible noise from conductor in corona cage

Science.gov (United States)

Li, Xuebao; Cui, Xiang; Lu, Tiebing; Ma, Wenzuo; Bian, Xingming; Wang, Donglai; Hiziroglu, Huseyin

2016-03-01

The corona-generated audible noise (AN) has become one of decisive factors in the design of high voltage direct current (HVDC) transmission lines. The AN from transmission lines can be attributed to sound pressure pulses which are generated by the multiple corona sources formed on the conductor, i.e., transmission lines. In this paper, a detailed time-domain characteristics of the sound pressure pulses, which are generated by the DC corona discharges formed over the surfaces of a stranded conductors, are investigated systematically in a laboratory settings using a corona cage structure. The amplitude of sound pressure pulse and its time intervals are extracted by observing a direct correlation between corona current pulses and corona-generated sound pressure pulses. Based on the statistical characteristics, a stochastic model is presented for simulating the sound pressure pulses due to DC corona discharges occurring on conductors. The proposed stochastic model is validated by comparing the calculated and measured A-weighted sound pressure level (SPL). The proposed model is then used to analyze the influence of the pulse amplitudes and pulse rate on the SPL. Furthermore, a mathematical relationship is found between the SPL and conductor diameter, electric field, and radial distance.

24 CFR 206.105 - Amount of MIP.

Science.gov (United States)

2010-04-01

... DEVELOPMENT MORTGAGE AND LOAN INSURANCE PROGRAMS UNDER NATIONAL HOUSING ACT AND OTHER AUTHORITIES HOME EQUITY CONVERSION MORTGAGE INSURANCE Contract Rights and Obligations Mortgage Insurance Premiums § 206.105 Amount of...

BOOK REVIEW: The Physical Basis of the Direction of Time

Science.gov (United States)

Giulini, Domenico

2008-10-01

This is the fifth edition of H Dieter Zeh's classic text on the physical foundations of time-irreversibility in the phenomena. A forerunner of this book was the 1984 German text 'Die Physik der Zeitrichtung' of about 80 pages, which appeared as volume 200 in the Springer series Lecture Notes in Physics. It was soon followed by a largely revised and extended English edition of about twice the length. Since then each new edition has been thoroughly revised and, edition by edition, new topics and chapters have been added. As the author says in the introduction: 'The prime intention of this book is to discuss the relations between various arrows of time, and to search for a universal master arrow'. Correspondingly, after a short chapter on 'the physical concept of time', the author systematically discusses in the remaining five chapters the time arrows in electromagnetic radiation theory, in thermodynamics, in quantum mechanics, in black-hole physics and cosmology, and in quantum cosmology. The chapters on thermodynamics and quantum mechanics slightly outweigh the others in terms of length. The fifth edition now includes two new section on 'cosmic probabilities and history' and 'quantum computers', and the section on the 'expansion of the universe' has been restructured and extended. Other changes concentrate on the sections on radiation damping, decoherence, interpretation of quantum theory, and quantum cosmology. It should also be mentioned that the author maintains a regularly updated website for the book at www.time-direction.de. The reading is always highly stimulating and uses results and ideas from a very broad range of physics, with interspersed historical and philosophical comments. Somehow outstanding and of particular interest is the chapter on quantum cosmology, which raises novel interpretational issues that cannot be found in any other textbook I know of on time asymmetry. As regards the mathematical prerequisites, the reader is assumed to have some

Direct-to-physician and direct-to-consumer advertising: Time to have stringent regulations.

Science.gov (United States)

Kannan, S; Gowri, S; Tyagi, V; Kohli, S; Jain, R; Kapil, P; Bhardwaj, A

2015-01-01

Direct to physician advertisements and direct to consumer advertisement (DTCA) is a well-known marketing strategy of pharmaceutical companies. Studies from the West and also from the Indian sub-continent revealed several lacunae in such advertisements. The present study was carried out to understand the international and national scenario regarding the lacunae in drug advertisements and the opinion of both physicians and patients regarding DTCA. The present study was conducted after obtaining approval from the institutional ethics committee. Warning letters (WLs) issued to pharmaceutical companies by United States Food and Drug Administration (USFDA) and Therapeutic Goods Administration (TGA) due to discrepancies in the advertisements were analyzed for reasons that were grouped into one of the following categories: overstatement of efficacy; unapproved indication; lack of adequate directions to use; omission of adverse effects; misleading claims; advertisement made for an unapproved drug (investigational new product). Drug advertisements in Current Index of Medical Specialties (CIMS) April-July 2014 issue was also analyzed for lacunae depending on categories as mentioned above. Physicians and patients in a tertiary care medical college and hospital were administered a validated questionnaire exploring their views about crucial aspects of DTCA. Descriptive statistics was used for each of the categories. A total of 93 WLs issued by USFDA and 36 by TGA were assessed. Majority of the WLs by USFDA were issued for omission of adverse effects (61/93, 65.6%) followed by misleading claims (54/93, 58.1%). Similarly, WLs by TGA were also mainly issued for the presence of misleading claims (35/36, 97.2%) followed by overstatement of efficacy (26/36, 72.2%) and CIMS evaluation had revealed that 78/92 (84.8%) advertisements omitted adverse effects, 20/92 (21.7%) had misleading claims, 9/92 (9.8%) had unapproved indications and 7/92 (7.6%) overstated the efficacy. With regard to

[Can the vascular specialist improve patient awareness about advanced directives?].

Science.gov (United States)

Sanson, H; Priollet, P

2016-05-01

patient. In private practice vascular medicine, it seems possible to mention the subject of advance directives, as recommended by the French authorities. The procedure is well perceived by the patients. It nevertheless implies allotting a non-negligible amount of additional consultation time. The reinforcement of the doctor-patient relationship suggested by these results should be confirmed by a qualitative study made up of meetings. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

Separation and preconcentration trace amounts of gold by using modified organo nanoclay closite 15A

Directory of Open Access Journals (Sweden)

Sayed Zia Mohammadi

2010-01-01

Full Text Available The application of organo nanoclay 5-(4-dimethylamino-benzylidene rhodanine-immobilized as a new, easily prepared, and stable solid sorbent for preconcentration trace amounts of Au(III ions in aqueous solution is presented. The sorption of Au(III ions was quantitative in the pH range of 2-4, and quantitative desorption occurred instantaneously with 10.0 mL of a mixture containing 0.5 mol L-1 Na2S2O3 and KSCN. Various parameters, such as the effect of pH, breakthrough volume, extraction time, and interference of a large number of anions and cations have been studied. The proposed method has been applied for determination of trace amount of gold in water samples.

First-aid training in school: amount, content and hindrances.

Science.gov (United States)

Bakke, H K; Bakke, H K; Schwebs, R

2017-11-01

To increase knowledge and competence about first aid in the population, first-aid instruction is included in primary and secondary school curricula. This study aimed to establish how much time is spent on first-aid training, which first-aid measures are taught, and which factors prevent teachers from providing the quantity and quality of first-aid training that they wish to give. A questionnaire was distributed to teachers in physical education in primary and secondary schools and to teachers in vocational subjects in higher secondary schools. The teachers taught a median of two lessons in first aid per year. Cardiopulmonary resuscitation (CPR) was taught by 64% of teachers, free airway and recovery position by 69% and stopping severe bleeding by 51%. Recognising heart attack and stroke was taught by 25% and 23%, respectively. The main factors that the teachers perceived as limiting the amount and quality of first-aid training were insufficient learning objective specifications in the curriculum, too many other competence aims, lack of CPR mannequins and lack of training as first-aid instructors. Norwegian teachers provide an appreciable amount of first-aid training to their students. However, several potential life-saving measures are poorly covered. The curriculum needs to contain first aid but also should specify what first-aid measures to be taught. First-aid training of teachers should adequately prepare them to be first-aid instructors. © 2017 The Authors. Acta Anaesthesiologica Scandinavica published by John Wiley & Sons Ltd on behalf of Acta Anaesthesiologica Scandinavica Foundation.

Micromachined silicon acoustic delay line with improved structural stability and acoustic directivity for real-time photoacoustic tomography

Science.gov (United States)

Cho, Young; Kumar, Akhil; Xu, Song; Zou, Jun

2017-03-01

Recent studies have shown that micromachined silicon acoustic delay lines can provide a promising solution to achieve real-time photoacoustic tomography without the need for complex transducer arrays and data acquisition electronics. However, as its length increases to provide longer delay time, the delay line becomes more vulnerable to structural instability due to reduced mechanical stiffness. In addition, the small cross-section area of the delay line results in a large acoustic acceptance angle and therefore poor directivity. To address these two issues, this paper reports the design, fabrication, and testing of a new silicon acoustic delay line enhanced with 3D printed polymer micro linker structures. First, mechanical deformation of the silicon acoustic delay line (with and without linker structures) under gravity was simulated by using finite element method. Second, the acoustic crosstalk and acoustic attenuation caused by the polymer micro linker structures were evaluated with both numerical simulation and ultrasound transmission testing. The result shows that the use of the polymer micro linker structures significantly improves the structural stability of the silicon acoustic delay lines without creating additional acoustic attenuation and crosstalk. In addition, a new tapered design for the input terminal of the delay line was also investigate to improve its acoustic directivity by reducing the acoustic acceptance angle. These two improvements are expected to provide an effective solution to eliminate current limitations on the achievable acoustic delay time and out-of-plane imaging resolution of micromachined silicon acoustic delay line arrays.

Theoretical quantification of shock-timing sensitivities for direct-drive inertial confinement fusion implosions on OMEGA

Science.gov (United States)

Cao, D.; Boehly, T. R.; Gregor, M. C.; Polsin, D. N.; Davis, A. K.; Radha, P. B.; Regan, S. P.; Goncharov, V. N.

2018-05-01

Using temporally shaped laser pulses, multiple shocks can be launched in direct-drive inertial confinement fusion implosion experiments to set the shell on a desired isentrope or adiabat. The velocity of the first shock and the times at which subsequent shocks catch up to it are measured through the velocity interferometry system for any reflector diagnostic [T. R. Boehly et al., Phys. Plasmas 18, 092706 (2011)] on OMEGA [T. R. Boehly et al., Opt. Commun. 133, 495 (1997)]. Simulations reproduce these velocity and shock-merger time measurements when using laser pulses designed for setting mid-adiabat (α ˜ 3) implosions, but agreement degrades for lower-adiabat (α ˜ 1) designs. Simulation results indicate that the shock timing discrepancy is most sensitive to details of the density and temperature profiles in the coronal plasma, which influences the laser energy coupled into the target, and only marginally sensitive to the target offset and beam power imbalance. To aid in verifying the coronal profile's influence, a new technique under development to infer coronal profiles using x-ray self-emission imaging [A. K. Davis et al., Bull. Am. Phys. Soc. 61, BAPS.2016.DPP.NO8.7 (2016)] can be applied to the pulse shapes used in shock-timing experiments.

Characteristics of pressure wave in common rail fuel injection system of high-speed direct injection diesel engines

Directory of Open Access Journals (Sweden)

Mohammad Reza Herfatmanesh

2016-05-01

Full Text Available The latest generation of high-pressure common rail equipment now provides diesel engines possibility to apply as many as eight separate injection pulses within the engine cycle for reducing emissions and for smoothing combustion. With these complicated injection arrangements, optimizations of operating parameters for various driving conditions are considerably difficult, particularly when integrating fuel injection parameters with other operating parameters such as exhaust gas recirculation rate and boost pressure together for evaluating calibration results. Understanding the detailed effects of fuel injection parameters upon combustion characteristics and emission formation is therefore particularly critical. In this article, the results and discussion of experimental investigations on a high-speed direct injection light-duty diesel engine test bed are presented for evaluating and analyzing the effects of main adjustable parameters of the fuel injection system on all regulated emission gases and torque performance. Main injection timing, rail pressure, pilot amount, and particularly pilot timing have been examined. The results show that optimization of each of those adjustable parameters is beneficial for emission reduction and torque improvement under different operating conditions. By exploring the variation in the interval between the pilot injection and the main injection, it is found that the pressure wave in the common rail has a significant influence on the subsequent injection. This suggests that special attentions must be paid for adjusting pilot timing or any injection interval when multi-injection is used. With analyzing the fuel amount oscillation of the subsequent injections to pilot separation, it demonstrates that the frequency of regular oscillations of the actual fuel amount or the injection pulse width with the variation in pilot separation is always the same for a specified fuel injection system, regardless of engine speed

Time-dependent changes in extra-domain A-fibronectin concentration and relative amounts of fibronectin-fibrin complexes in plasma of patients with peripheral arterial disease after endovascular revascularisation.

Science.gov (United States)

Pupek, Małgorzata; Krzyżanowska-Gołąb, Dorota; Kotschy, Daniel; Witkiewicz, Wojciech; Kwiatkowska, Wiesława; Kotschy, Maria; Kątnik-Prastowska, Iwona

2018-03-13

Fibronectin (FN) may be involved in time- and stage-dependent and inter-related controlled processes of inflammation, coagulation, and wound healing accompanying peripheral arterial disease (PAD). In the present study, FN and FN-containing extra-domain A (EDA-FN), macromolecular FN-fibrin complexes, and FN monomer were analysed in the plasma of 142 PAD patients, including 37 patients with restenosis, for 37 months after revascularisation. FN concentration increased significantly in the plasma of PAD patients within 7 to 12 months after revascularisation, whereas the high concentration of EDA-FN was maintained up to 24 months, significantly higher in the group 7 to 12 months after revascularisation with recurrence of stenosis and lower in the PAD groups 1 to 3 months and 4 to 6 months after revascularisation with comorbid diabetes and ulceration, respectively. The relative amounts of FN-fibrin complexes up to 1600 kDa and FN monomer were significantly higher, within intervals of 4 to 24 months and 4 to 6 months after revascularisation, respectively. Moreover, the relative amounts of 750 to 1600 kDa FN-fibrin complexes within 13 to 24 months after revascularisation were higher in comparison with those in the group without restenosis. In conclusion, high levels of EDA-FN and FN-fibrin complexes could have potential diagnostic value in the management of PAD patients after revascularisation, predicting restenosis risk. © 2018 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

Effects of exercise amount and intensity on abdominal obesity and glucose tolerance in obese adults: a randomized trial.

Science.gov (United States)

Ross, Robert; Hudson, Robert; Stotz, Paula J; Lam, Miu

2015-03-03

Exercise reduces obesity and related glucose tolerance, but whether increasing exercise intensity offers additional benefit at fixed exercise amounts is unknown. To determine the separate effects of exercise amount and intensity on abdominal obesity and glucose tolerance. 24-week, single-center, parallel-group trial from 2009 to 2013. (ClinicalTrials.gov: NCT00955071). Kingston, Ontario, Canada. 300 abdominally obese adults. Control (no exercise) (n = 75) or 5 weekly sessions of low-amount, low-intensity exercise (LALI) (180 and 300 kcal/session for women and men, respectively, at 50% of maximum oxygen consumption [V̇o2peak]) (n = 73); high-amount, low-intensity exercise (HALI) (360 and 600 kcal/session, respectively, at 50% of V̇o2peak) (n = 76); or high-amount, high-intensity exercise (HAHI) (360 and 600 kcal/session, respectively, at 75% of V̇o2peak) (n = 76). Daily unsupervised physical activity and sedentary time were measured by accelerometer. Waist circumference and 2-hour glucose level (primary outcomes) and cardiorespiratory fitness and measures of insulin action (secondary measurements). 217 participants (72.3%) completed the intervention. Mean exercise time in minutes per session was 31 (SD, 4.4) for LALI, 58 (SD, 7.6) for HALI, and 40 (SD, 6.2) for HAHI. Daily unsupervised physical activity and sedentary time did not change in any exercise group versus control (P > 0.33). After adjustment for age and sex in a linear mixed model, reductions in waist circumference were greater in the LALI (-3.9 cm [95% CI, -5.6 to -2.3 cm]; P exercise groups (P > 0.43). After adjustment for covariates, reductions in 2-hour glucose level were greater in the HAHI group (-0.7 mmol/L [-12.5 mg/dL] [CI, -1.3 to -0.1 mmol/L {-23.5 to -1.5 mg/dL}]; P = 0.027) than the control group but did not differ for the LALI or HALI group versus the control group (P > 0.159). Weight loss was greater in all exercise groups than the control group (P exercise groups (P > 0.182). The

A qualitative investigation of Foundation Year 2 doctors' views on the European Working Time Directive.

Science.gov (United States)

Duncan, Myanna; Haslam, Cheryl

2015-01-01

PURPOSE - The purpose of this paper is to examine the personal views and experiences of Foundation Year 2 doctors operating under the European Working Time Directive (EWTD). DESIGN/METHODOLOGY/APPROACH - In total, 36 Foundation Year 2 doctors from a single UK-based Deanery participated in this semistructured interview study. FINDINGS - Findings indicated that Foundation doctors typically welcomed a regulation of working hours, but reported frustration at the manner in which the Directive had been implemented. Participants reported concerns at reducing hours by removing out-of-hours working in order to meet EWTD requirements. Out-of-hours shifts were highly valued owing to their increased opportunities for autonomous clinical decision making. By contrast, day-shifts were regarded as heavily administrative in nature and were perceived as service provision. Foundation doctors discussed the unique nature of the out-of-hours working period which appeared to provide specific learning opportunities as doctors draw on time management and prioritisation skills. ORIGINALITY/VALUE - Given the challenges the EWTD presents, careful rota planning is essential. First, the authors would encourage the restructuring of day-shift work to provide a greater emphasis on hands-on skills experience in a supportive, supervised environment. Second, where possible, Foundation doctors might benefit from the opportunity to engage in some out-of-hours working, such as with multi-professional "Hospital at Night" teams. Third, the authors would encourage junior doctor involvement in rota design and planning which may increase their perceived autonomy and therefore buy-in of working practices.

Time-variant partial directed coherence in analysis of the cardiovascular system. A methodological study

International Nuclear Information System (INIS)

Milde, T; Schwab, K; Walther, M; Eiselt, M; Witte, H; Schelenz, C; Voss, A

2011-01-01

Time-variant partial directed coherence (tvPDC) is used for the first time in a multivariate analysis of heart rate variability (HRV), respiratory movements (RMs) and (systolic) arterial blood pressure. It is shown that respiration-related HRV components which also occur at other frequencies besides the RM frequency (= respiratory sinus arrhythmia, RSA) can be identified. These additional components are known to be an effect of the 'half-the-mean-heart-rate-dilemma' ('cardiac aliasing' CA). These CA components may contaminate the entire frequency range of HRV and can lead to misinterpretation of the RSA analysis. TvPDC analysis of simulated and clinical data (full-term neonates and sedated patients) reveals these contamination effects and, in addition, the respiration-related CA components can be separated from the RSA component and the Traube–Hering–Mayer wave. It can be concluded that tvPDC can be beneficially applied to avoid misinterpretations in HRV analyses as well as to quantify partial correlative interaction properties between RM and RSA

NMR relaxation times of natural rubber latex

International Nuclear Information System (INIS)

Harun, S.; Aziz, H.; Basir, Z.

1994-01-01

NMR relaxation times T sub 1 and T sub 2 of natural rubber latex have been measured at 25 degree C on a pulsed NMR spectrometer. The work focuses on the variation of the relaxation times with the amount of water content from 0% to 50%. The water content was adjusted by centrifuging and removing a certain amount of water from the sample. The data were analysed using a biexponential fitting procedure which yields simultaneously either T sub 1a and T sub 1b or T sub 2a and T sub 2b. The amount of solid was compared with the known amount of dry rubber content

On the effect of injection timing on the ignition of lean PRF/air/EGR mixtures under direct dual fuel stratification conditions

KAUST Repository

Luong, Minh Bau; Sankaran, Ramanan; Yu, Gwang Hyeon; Chung, Suk-Ho; Yoo, Chun Sang

2017-01-01

The ignition characteristics of lean primary reference fuel (PRF)/air/exhaust gas recirculation (EGR) mixture under reactivity-controlled compression ignition (RCCI) and direct duel fuel stratification (DDFS) conditions are investigated by 2-D direct numerical simulations (DNSs) with a 116-species reduced chemistry of the PRF oxidation. The 2-D DNSs of the DDFS combustion are performed by varying the injection timing of iso-octane (i-C8H18) with a pseudo-iso-octane (PC8H18) model together with a novel compression heating model to account for the compression heating and expansion cooling effects of the piston motion in an engine cylinder. The PC8H18 model is newly developed to mimic the timing, duration, and cooling effects of the direct injection of i-C8H18 onto a premixed background charge of PRF/air/EGR mixture with composition inhomogeneities. It is found that the RCCI combustion exhibits a very high peak heat release rate (HRR) with a short combustion duration due to the predominance of the spontaneous ignition mode of combustion. However, the DDFS combustion has much lower peak HRR and longer combustion duration regardless of the fuel injection timing compared to those of the RCCI combustion, which is primarily attributed to the sequential injection of i-C8H18. It is also found that the ignition delay of the DDFS combustion features a non-monotonic behavior with increasing fuel-injection timing due to the different effect of fuel evaporation on the low-, intermediate-, and high-temperature chemistry of the PRF oxidation. The budget and Damköhler number analyses verify that although a mixed combustion mode of deflagration and spontaneous ignition exists during the early phase of the DDFS combustion, the spontaneous ignition becomes predominant during the main combustion, and hence, the spread-out of heat release rate in the DDFS combustion is mainly governed by the direct injection process of i-C8H18. Finally, a misfire is observed for the DDFS combustion when

On the effect of injection timing on the ignition of lean PRF/air/EGR mixtures under direct dual fuel stratification conditions

KAUST Repository

Luong, Minh Bau

2017-06-10

The ignition characteristics of lean primary reference fuel (PRF)/air/exhaust gas recirculation (EGR) mixture under reactivity-controlled compression ignition (RCCI) and direct duel fuel stratification (DDFS) conditions are investigated by 2-D direct numerical simulations (DNSs) with a 116-species reduced chemistry of the PRF oxidation. The 2-D DNSs of the DDFS combustion are performed by varying the injection timing of iso-octane (i-C8H18) with a pseudo-iso-octane (PC8H18) model together with a novel compression heating model to account for the compression heating and expansion cooling effects of the piston motion in an engine cylinder. The PC8H18 model is newly developed to mimic the timing, duration, and cooling effects of the direct injection of i-C8H18 onto a premixed background charge of PRF/air/EGR mixture with composition inhomogeneities. It is found that the RCCI combustion exhibits a very high peak heat release rate (HRR) with a short combustion duration due to the predominance of the spontaneous ignition mode of combustion. However, the DDFS combustion has much lower peak HRR and longer combustion duration regardless of the fuel injection timing compared to those of the RCCI combustion, which is primarily attributed to the sequential injection of i-C8H18. It is also found that the ignition delay of the DDFS combustion features a non-monotonic behavior with increasing fuel-injection timing due to the different effect of fuel evaporation on the low-, intermediate-, and high-temperature chemistry of the PRF oxidation. The budget and Damköhler number analyses verify that although a mixed combustion mode of deflagration and spontaneous ignition exists during the early phase of the DDFS combustion, the spontaneous ignition becomes predominant during the main combustion, and hence, the spread-out of heat release rate in the DDFS combustion is mainly governed by the direct injection process of i-C8H18. Finally, a misfire is observed for the DDFS combustion when

Deregulation of obesity-relevant genes is associated with progression in BMI and the amount of adipose tissue in pigs.

Science.gov (United States)

Mentzel, Caroline M Junker; Cardoso, Tainã Figueiredo; Pipper, Christian Bressen; Jacobsen, Mette Juul; Jørgensen, Claus Bøttcher; Cirera, Susanna; Fredholm, Merete

2018-02-01

The aim of this study was to elucidate the relative impact of three phenotypes often used to characterize obesity on perturbation of molecular pathways involved in obesity. The three obesity-related phenotypes are (1) body mass index (BMI), (2) amount of subcutaneous adipose tissue (SATa), and (3) amount of retroperitoneal adipose tissue (RPATa). Although it is generally accepted that increasing amount of RPATa is 'unhealthy', a direct comparison of the relative impact of the three obesity-related phenotypes on gene expression has, to our knowledge, not been performed previously. We have used multiple linear models to analyze altered gene expression of selected obesity-related genes in tissues collected from 19 female pigs phenotypically characterized with respect to the obesity-related phenotypes. Gene expression was assessed by high-throughput qPCR in RNA from liver, skeletal muscle and abdominal adipose tissue. The stringent statistical approach used in the study has increased the power of the analysis compared to the classical approach of analysis in divergent groups of individuals. Our approach led to the identification of key components of cellular pathways that are modulated in the three tissues in association with changes in the three obesity-relevant phenotypes (BMI, SATa and RPATa). The deregulated pathways are involved in biosynthesis and transcript regulation in adipocytes, in lipid transport, lipolysis and metabolism, and in inflammatory responses. Deregulation seemed more comprehensive in liver (23 genes) compared to abdominal adipose tissue (10 genes) and muscle (3 genes). Notably, the study supports the notion that excess amount of intra-abdominal adipose tissue is associated with a greater metabolic disease risk. Our results provide molecular support for this notion by demonstrating that increasing amount of RPATa has a higher impact on perturbation of cellular pathways influencing obesity and obesity-related metabolic traits compared to increase

STORM3: a new flood forecast management and monitoring system in accordance with the recent Italian national directive

Directory of Open Access Journals (Sweden)

A. Burastero

2005-01-01

Full Text Available The effectiveness of alert systems for civil protection purposes, defined as the ability to minimize the level of risk in a region subjected to an imminent flood event, strongly depends on availability and exploitability of information. It also depends on technical expertise and the ability to easily manage the civil protection actions through the organization into standardized procedures. Hydro-geologic and hydraulic risk estimation, based on the combination of different technical issues (in this case meteorological, hydro-geological, hydraulic matters, but also socio-economic ones, requires the integration between quasi-static and time-varying information within the same operative platform. Beside the real-time data exchange, a Decision Support System must provide tools which enable knowledge sharing among the civil protection centres. Moreover, due to the amount and heterogeneity of information, quality procedures become necessary to handle all forecasting and monitoring routines within operative centres, according to the latest national directive. In Italy procedures on the civil protection matter have been condensed into the Prime Minister's Directive (27 February 2004. STORM3, an innovative management and monitoring System for real-time flood forecasting and warning, takes in the Directive, supporting the operator step by step within the different phases of civil protection activities.

Generalized direct Lyapunov method for the analysis of stability and attraction in general time systems

International Nuclear Information System (INIS)

Druzhinina, O V; Shestakov, A A

2002-01-01

A generalized direct Lyapunov method is put forward for the study of stability and attraction in general time systems of the following types: the classical dynamical system in the sense of Birkhoff, the general system in the sense of Zubov, the general system in the sense of Seibert, the general system with delay, and the general 'input-output' system. For such systems, with the help of generalized Lyapunov functions with respect to two filters, two quasifilters, or two filter bases, necessary and sufficient conditions for stability and attraction are obtained under minimal assumptions about the mathematical structure of the general system

Rapid identification and susceptibility testing of Candida spp. from positive blood cultures by combination of direct MALDI-TOF mass spectrometry and direct inoculation of Vitek 2.

Science.gov (United States)

Idelevich, Evgeny A; Grunewald, Camilla M; Wüllenweber, Jörg; Becker, Karsten

2014-01-01

Fungaemia is associated with high mortality rates and early appropriate antifungal therapy is essential for patient management. However, classical diagnostic workflow takes up to several days due to the slow growth of yeasts. Therefore, an approach for direct species identification and direct antifungal susceptibility testing (AFST) without prior time-consuming sub-culturing of yeasts from positive blood cultures (BCs) is urgently needed. Yeast cell pellets prepared using Sepsityper kit were used for direct identification by MALDI-TOF mass spectrometry (MS) and for direct inoculation of Vitek 2 AST-YS07 card for AFST. For comparison, MALDI-TOF MS and Vitek 2 testing were performed from yeast subculture. A total of twenty four positive BCs including twelve C. glabrata, nine C. albicans, two C. dubliniensis and one C. krusei isolate were processed. Applying modified thresholds for species identification (score ≥ 1.5 with two identical consecutive propositions), 62.5% of BCs were identified by direct MALDI-TOF MS. AFST results were generated for 72.7% of BCs directly tested by Vitek 2 and for 100% of standardized suspensions from 24 h cultures. Thus, AFST comparison was possible for 70 isolate-antifungal combinations. Essential agreement (minimum inhibitory concentration difference ≤ 1 double dilution step) was 88.6%. Very major errors (VMEs) (false-susceptibility), major errors (false-resistance) and minor errors (false categorization involving intermediate result) amounted to 33.3% (of resistant isolates), 1.9% (of susceptible isolates) and 1.4% providing 90.0% categorical agreement. All VMEs were due to fluconazole or voriconazole. This direct method saved on average 23.5 h for identification and 15.1 h for AFST, compared to routine procedures. However, performance for azole susceptibility testing was suboptimal and testing from subculture remains indispensable to validate the direct finding.

Rapid identification and susceptibility testing of Candida spp. from positive blood cultures by combination of direct MALDI-TOF mass spectrometry and direct inoculation of Vitek 2.

Directory of Open Access Journals (Sweden)

Evgeny A Idelevich

Full Text Available Fungaemia is associated with high mortality rates and early appropriate antifungal therapy is essential for patient management. However, classical diagnostic workflow takes up to several days due to the slow growth of yeasts. Therefore, an approach for direct species identification and direct antifungal susceptibility testing (AFST without prior time-consuming sub-culturing of yeasts from positive blood cultures (BCs is urgently needed. Yeast cell pellets prepared using Sepsityper kit were used for direct identification by MALDI-TOF mass spectrometry (MS and for direct inoculation of Vitek 2 AST-YS07 card for AFST. For comparison, MALDI-TOF MS and Vitek 2 testing were performed from yeast subculture. A total of twenty four positive BCs including twelve C. glabrata, nine C. albicans, two C. dubliniensis and one C. krusei isolate were processed. Applying modified thresholds for species identification (score ≥ 1.5 with two identical consecutive propositions, 62.5% of BCs were identified by direct MALDI-TOF MS. AFST results were generated for 72.7% of BCs directly tested by Vitek 2 and for 100% of standardized suspensions from 24 h cultures. Thus, AFST comparison was possible for 70 isolate-antifungal combinations. Essential agreement (minimum inhibitory concentration difference ≤ 1 double dilution step was 88.6%. Very major errors (VMEs (false-susceptibility, major errors (false-resistance and minor errors (false categorization involving intermediate result amounted to 33.3% (of resistant isolates, 1.9% (of susceptible isolates and 1.4% providing 90.0% categorical agreement. All VMEs were due to fluconazole or voriconazole. This direct method saved on average 23.5 h for identification and 15.1 h for AFST, compared to routine procedures. However, performance for azole susceptibility testing was suboptimal and testing from subculture remains indispensable to validate the direct finding.

A large amount synthesis of nanopowder using modulated induction thermal plasmas synchronized with intermittent feeding of raw materials

International Nuclear Information System (INIS)

Tanaka, Y; Tsuke, T; Guo, W; Uesugi, Y; Ishijima, T; Watanabe, S; Nakamura, K

2012-01-01

A large amount synthesis method for titanium dioxide (TiO 2 ) nanopowder is proposed by direct evaporation of titanium powders using Ar-O 2 pulse-modulated induction thermal plasma (PMITP). To realize a large amount synthesis of nanopowder, the PMITP method was combined with the intermittent and heavy load feeding of raw material powder, as well as the quenching gas injection. The intermittent powder feeding was synchronized with the modulation of the coil current sustaining the PMITP for complete evaporation of the injected powder. Synthesized particles by the developed method were analyzed by FE-SEM and XRD. Results indicated that the synthesized particles by the 20-kW PMITP with a heavy loading rate of 12.3 g min −1 had a similar particle size distribution with the mean diameter about 40 nm to those with light loading of 4.2 g min −1 .

Estimating time and travel costs incurred in clinic based screening: flexible sigmoidoscopy screening for colorectal cancer.

Science.gov (United States)

Frew, E; Wolstenholme, J L; Atkin, W; Whynes, D K

1999-01-01

To identify the characteristics of mode of travel to screening clinics; to estimate the time and travel costs incurred in attending; to investigate whether such costs are likely to bias screening compliance. Twelve centres in the trial of flexible sigmoidoscopy screening for colorectal cancer, drawn from across Great Britain. Analysis of 3525 questionnaires completed by screening subjects while attending clinics. Information supplied included sociodemographic characteristics, modes of travel, expenses, activities foregone owing to attendance, and details of companions. More than 80% of subjects arrived at the clinics by car, and about two thirds were accompanied. On average, the clinic visit involved a 14.4 mile (22.8 km) round trip, requiring 130 minutes. Mean travel costs amounted to 6.10 Pounds per subject. The mean gross direct non-medical and indirect cost per subject amounted to 16.90 Pounds, and the mean overall gross cost per attendance was 22.40 Pounds. Compared with the Great Britain population as a whole, non-manual classes were more strongly represented, and the self employed less strongly represented, among the attendees. In relation to direct medical costs, the time and travel costs of clinic based screening can be substantial, may influence the overall cost effectiveness of a screening programme, and may deter potential subjects from attending.

Intubation learning curve: comparison between video and direct laryngoscopy by inexperienced students.

Science.gov (United States)

Aghamohammadi, H; Massoudi, N; Fathi, M; Jaffari, A; Gharaei, B; Moshki, A

2015-01-01

Background: Direct laryngoscopy (DL) is considered the most common method of tracheal intubation. On the other hand, evidence shows the growing role of video laryngoscopy in danger airway administration. Objectives: Due to the importance of a proper training to accomplish an accurate and fast intubation by the student of anesthesia, this research was conducted to assess the effects of DL and video laryngoscopy (Glidescope VL) training on the success rate of tracheal intubation by low-skill students. Materials/Patients and styles: 50 undergraduate students of anesthesiology took part in this randomized control educational intervention. Having no considerable experience in intubation, they were selected and divided randomly into two equal groups (n = 25); video-laryngoscopy via GlideScope VL and direct laryngoscopy (DL) via a Macintosh blade were prepared by the same experienced anesthesiologist. All the participants practiced intubation six times on the same mannequin within a routine airway situation. The maximum acceptable time for each intubation was 3 minutes and three times of successful intubation was considered as an appropriate intubation skill. The required time for laryngoscopy and intubation at each stage, the grade of glottis view, the reasons for an unsuccessful intubation and the amount of successful intubations were recorded and compared between groups. Results: There was a clear variation between the 2 teams, in all the steps, based on the required time for laryngoscopy and intubation (p = 0.0001). Data analysis was performed by using repeated measures data which demonstrated that the necessary time for laryngoscopy and intubation during the study was clearly lower in the GlideScope VL team (p = .0001). In first five rounds of training, the glottis view in the DL group was significantly better than in the VL group (p < 0.05). Conclusion: Based on the result of today' study, routine airway intubation by using GlideScope VL is significantly faster than

Temperature-dependent release of volatile organic compounds of eucalypts by direct analysis in real time (DART) mass spectrometry.

Science.gov (United States)

Maleknia, Simin D; Vail, Teresa M; Cody, Robert B; Sparkman, David O; Bell, Tina L; Adams, Mark A

2009-08-01

A method is described for the rapid identification of biogenic, volatile organic compounds (VOCs) emitted by plants, including the analysis of the temperature dependence of those emissions. Direct analysis in real time (DART) enabled ionization of VOCs from stem and leaf of several eucalyptus species including E. cinerea, E. citriodora, E. nicholii and E. sideroxylon. Plant tissues were placed directly in the gap between the DART ionization source skimmer and the capillary inlet of the time-of-flight (TOF) mass spectrometer. Temperature-dependent emission of VOCs was achieved by adjusting the temperature of the helium gas into the DART ionization source at 50, 100, 200 and 300 degrees C, which enabled direct evaporation of compounds, up to the onset of pyrolysis of plant fibres (i.e. cellulose and lignin). Accurate mass measurements facilitated by TOF mass spectrometry provided elemental compositions for the VOCs. A wide range of compounds was detected from simple organic compounds (i.e. methanol and acetone) to a series of monoterpenes (i.e. pinene, camphene, cymene, eucalyptol) common to many plant species, as well as several less abundant sesquiterpenes and flavonoids (i.e. naringenin, spathulenol, eucalyptin) with antioxidant and antimicrobial properties. The leaf and stem tissues for all four eucalypt species showed similar compounds. The relative abundances of methanol and ethanol were greater in stem wood than in leaf tissue suggesting that DART could be used to investigate the tissue-specific transport and emissions of VOCs. Copyright (c) 2009 John Wiley & Sons, Ltd.

Experience of plastic surgery registrars in a European Working Time Directive compliant rota.

Science.gov (United States)

de Blacam, Catherine; Tierney, Sean; Shelley, Odhran

2017-08-01

Surgical training requires exposure to clinical decision-making and operative experience in a supervised environment. It is recognised that learning ability is compromised when fatigued. The European Working Time Directive requires a decrease in working hours, but compliance reduces trainees' clinical exposure, which has profound implications for plastic surgery training. The aim of this study was to evaluate plastic surgery registrars' experience of an EWTD-compliant rota, and to examine its impact on patient care, education, and logbook activity. An electronic survey was distributed to plastic surgery registrars in a university teaching hospital. Registrars were asked to rate 31 items on a five-point Likert scale, including statements on patient care, clinical and operative duties, training, and quality-of-life. Interquartile deviations explored consensus among responses. Operative caseload was objectively evaluated using eLogbook data to compare activity at equal time points before and after implementation of the EWTD rota. Highest levels of consensus among respondents were found in positive statements addressing alertness and preparation for theatre, as well as time to read and study for exams. Registrars agreed that EWTD compliance improved their quality-of-life. However, it was felt that continuity of patient care was compromised by work hours restriction. Registrars were concerned about their operative experience. eLogbook data confirmed a fall-off in mean caseload of 31.8% compared to activity prior to EWTD rota implementation. While EWTD compliant rotas promote trainee quality-of-life and satisfaction with training, attention needs to be paid to optimising operative opportunities.

Physician Fee Schedule National Payment Amount File

Data.gov (United States)

U.S. Department of Health & Human Services — The significant size of the Physician Fee Schedule Payment Amount File-National requires that database programs (e.g., Access, dBase, FoxPro, etc.) be used to read...

INVESTIGATING THE AMOUNT OF WORK ADDICTION AMONG MUNICIPALITY EMPLOYEES OF PIRANSHAHR CITY, IRAN

OpenAIRE

Nematollah Mahmoud Pour; Mohammad Amin Savareh Denkhe; Naser Faraji; Naser Bayezidi

2017-01-01

The work, at the present era, is an inseparable part of human life. Every day, people spend much of their time in organizations. Unlimited pressures and demands of the organization forced the people to keep working constantly which may increase the probability formation of addiction to work with them, which this may leave behind the positive and negative effects in the related organization. Thus, the purpose of this research is to investigate the amount of work addiction among municipality em...

A combination of HARMONIE short time direct normal irradiance forecasts and machine learning: The #hashtdim procedure

Science.gov (United States)

Gastón, Martín; Fernández-Peruchena, Carlos; Körnich, Heiner; Landelius, Tomas

2017-06-01

The present work describes the first approach of a new procedure to forecast Direct Normal Irradiance (DNI): the #hashtdim that treats to combine ground information and Numerical Weather Predictions. The system is centered in generate predictions for the very short time. It combines the outputs from the Numerical Weather Prediction Model HARMONIE with an adaptive methodology based on Machine Learning. The DNI predictions are generated with 15-minute and hourly temporal resolutions and presents 3-hourly updates. Each update offers forecasts to the next 12 hours, the first nine hours are generated with 15-minute temporal resolution meanwhile the last three hours present hourly temporal resolution. The system is proved over a Spanish emplacement with BSRN operative station in south of Spain (PSA station). The #hashtdim has been implemented in the framework of the Direct Normal Irradiance Nowcasting methods for optimized operation of concentrating solar technologies (DNICast) project, under the European Union's Seventh Programme for research, technological development and demonstration framework.

Direct conversion of nuclear energy into radiation: New direction in thermonuclear laser fusion

International Nuclear Information System (INIS)

Babaev, Yu.N.; Vedenov, A.A.; Filyukov, A.A.

1995-01-01

In investigations dealing with thermonuclear fusion, a radical new direction appeared some time ago, namely the direct conversion of nuclear and thermonuclear energy into radiation energy. This paper reviews early work on this topic in Russia and the United States and discusses some recent new directions

Determination of Exterior Orientation Parameters Through Direct Geo-Referencing in a Real-Time Aerial Monitoring System

Science.gov (United States)

Kim, H.; Lee, J.; Choi, K.; Lee, I.

2012-07-01

Rapid responses for emergency situations such as natural disasters or accidents often require geo-spatial information describing the on-going status of the affected area. Such geo-spatial information can be promptly acquired by a manned or unmanned aerial vehicle based multi-sensor system that can monitor the emergent situations in near real-time from the air using several kinds of sensors. Thus, we are in progress of developing such a real-time aerial monitoring system (RAMS) consisting of both aerial and ground segments. The aerial segment acquires the sensory data about the target areas by a low-altitude helicopter system equipped with sensors such as a digital camera and a GPS/IMU system and transmits them to the ground segment through a RF link in real-time. The ground segment, which is a deployable ground station installed on a truck, receives the sensory data and rapidly processes them to generate ortho-images, DEMs, etc. In order to generate geo-spatial information, in this system, exterior orientation parameters (EOP) of the acquired images are obtained through direct geo-referencing because it is difficult to acquire coordinates of ground points in disaster area. The main process, since the data acquisition stage until the measurement of EOP, is discussed as follows. First, at the time of data acquisition, image acquisition time synchronized by GPS time is recorded as part of image file name. Second, the acquired data are then transmitted to the ground segment in real-time. Third, by processing software for ground segment, positions/attitudes of acquired images are calculated through a linear interpolation using the GPS time of the received position/attitude data and images. Finally, the EOPs of images are obtained from position/attitude data by deriving the relationships between a camera coordinate system and a GPS/IMU coordinate system. In this study, we evaluated the accuracy of the EOP decided by direct geo-referencing in our system. To perform this

DETERMINATION OF EXTERIOR ORIENTATION PARAMETERS THROUGH DIRECT GEO-REFERENCING IN A REAL-TIME AERIAL MONITORING SYSTEM

Directory of Open Access Journals (Sweden)

H. Kim

2012-07-01

Full Text Available Rapid responses for emergency situations such as natural disasters or accidents often require geo-spatial information describing the on-going status of the affected area. Such geo-spatial information can be promptly acquired by a manned or unmanned aerial vehicle based multi-sensor system that can monitor the emergent situations in near real-time from the air using several kinds of sensors. Thus, we are in progress of developing such a real-time aerial monitoring system (RAMS consisting of both aerial and ground segments. The aerial segment acquires the sensory data about the target areas by a low-altitude helicopter system equipped with sensors such as a digital camera and a GPS/IMU system and transmits them to the ground segment through a RF link in real-time. The ground segment, which is a deployable ground station installed on a truck, receives the sensory data and rapidly processes them to generate ortho-images, DEMs, etc. In order to generate geo-spatial information, in this system, exterior orientation parameters (EOP of the acquired images are obtained through direct geo-referencing because it is difficult to acquire coordinates of ground points in disaster area. The main process, since the data acquisition stage until the measurement of EOP, is discussed as follows. First, at the time of data acquisition, image acquisition time synchronized by GPS time is recorded as part of image file name. Second, the acquired data are then transmitted to the ground segment in real-time. Third, by processing software for ground segment, positions/attitudes of acquired images are calculated through a linear interpolation using the GPS time of the received position/attitude data and images. Finally, the EOPs of images are obtained from position/attitude data by deriving the relationships between a camera coordinate system and a GPS/IMU coordinate system. In this study, we evaluated the accuracy of the EOP decided by direct geo-referencing in our system

A novel method for sampling the suspended sediment load in the tidal environment using bi-directional time-integrated mass-flux sediment (TIMS) samplers

Science.gov (United States)

Elliott, Emily A.; Monbureau, Elaine; Walters, Glenn W.; Elliott, Mark A.; McKee, Brent A.; Rodriguez, Antonio B.

2017-12-01

Identifying the source and abundance of sediment transported within tidal creeks is essential for studying the connectivity between coastal watersheds and estuaries. The fine-grained suspended sediment load (SSL) makes up a substantial portion of the total sediment load carried within an estuarine system and efficient sampling of the SSL is critical to our understanding of nutrient and contaminant transport, anthropogenic influence, and the effects of climate. Unfortunately, traditional methods of sampling the SSL, including instantaneous measurements and automatic samplers, can be labor intensive, expensive and often yield insufficient mass for comprehensive geochemical analysis. In estuaries this issue is even more pronounced due to bi-directional tidal flow. This study tests the efficacy of a time-integrated mass sediment sampler (TIMS) design, originally developed for uni-directional flow within the fluvial environment, modified in this work for implementation the tidal environment under bi-directional flow conditions. Our new TIMS design utilizes an 'L' shaped outflow tube to prevent backflow, and when deployed in mirrored pairs, each sampler collects sediment uniquely in one direction of tidal flow. Laboratory flume experiments using dye and particle image velocimetry (PIV) were used to characterize the flow within the sampler, specifically, to quantify the settling velocities and identify stagnation points. Further laboratory tests of sediment indicate that bidirectional TIMS capture up to 96% of incoming SSL across a range of flow velocities (0.3-0.6 m s-1). The modified TIMS design was tested in the field at two distinct sampling locations within the tidal zone. Single-time point suspended sediment samples were collected at high and low tide and compared to time-integrated suspended sediment samples collected by the bi-directional TIMS over the same four-day period. Particle-size composition from the bi-directional TIMS were representative of the array of

An optimized work-flow to reduce time-to-detection of carbapenemase-producing Enterobacteriaceae (CPE) using direct testing from rectal swabs.

Science.gov (United States)

O'Connor, C; Kiernan, M G; Finnegan, C; O'Hara, M; Power, L; O'Connell, N H; Dunne, C P

2017-05-04

Rapid detection of patients with carbapenemase-producing Enterobacteriaceae (CPE) is essential for the prevention of nosocomial cross-transmission, allocation of isolation facilities and to protect patient safety. Here, we aimed to design a new laboratory work-flow, utilizing existing laboratory resources, in order to reduce time-to-diagnosis of CPE. A review of the current CPE testing processes and of the literature was performed to identify a real-time commercial polymerase chain reaction (PCR) assay that could facilitate batch testing of CPE clinical specimens, with adequate CPE gene coverage. Stool specimens (210) were collected; CPE-positive inpatients (n = 10) and anonymized community stool specimens (n = 200). Rectal swabs (eSwab™) were inoculated from collected stool specimens and a manual DNA extraction method (QIAamp® DNA Stool Mini Kit) was employed. Extracted DNA was then processed on the Check-Direct CPE® assay. The three step process of making the eSwab™, extracting DNA manually and running the Check-Direct CPE® assay, took method of CPE screening; average time-to-diagnosis of 48/72 h. Utilizing this CPE work-flow would allow a 'same-day' result. Antimicrobial susceptibility testing results, as is current practice, would remain a 'next-day' result. In conclusion, the Check-Direct CPE® assay was easily integrated into a local laboratory work-flow and could facilitate a large volume of CPE screening specimens in a single batch, making it cost-effective and convenient for daily CPE testing.

Inferring Weighted Directed Association Networks from Multivariate Time Series with the Small-Shuffle Symbolic Transfer Entropy Spectrum Method

Directory of Open Access Journals (Sweden)

Yanzhu Hu

2016-09-01

Full Text Available Complex network methodology is very useful for complex system exploration. However, the relationships among variables in complex systems are usually not clear. Therefore, inferring association networks among variables from their observed data has been a popular research topic. We propose a method, named small-shuffle symbolic transfer entropy spectrum (SSSTES, for inferring association networks from multivariate time series. The method can solve four problems for inferring association networks, i.e., strong correlation identification, correlation quantification, direction identification and temporal relation identification. The method can be divided into four layers. The first layer is the so-called data layer. Data input and processing are the things to do in this layer. In the second layer, we symbolize the model data, original data and shuffled data, from the previous layer and calculate circularly transfer entropy with different time lags for each pair of time series variables. Thirdly, we compose transfer entropy spectrums for pairwise time series with the previous layer’s output, a list of transfer entropy matrix. We also identify the correlation level between variables in this layer. In the last layer, we build a weighted adjacency matrix, the value of each entry representing the correlation level between pairwise variables, and then get the weighted directed association network. Three sets of numerical simulated data from a linear system, a nonlinear system and a coupled Rossler system are used to show how the proposed approach works. Finally, we apply SSSTES to a real industrial system and get a better result than with two other methods.

40 CFR 1065.645 - Amount of water in an ideal gas.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Amount of water in an ideal gas. 1065... in an ideal gas. This section describes how to determine the amount of water in an ideal gas, which... of water in an ideal gas, x H20, as follows: ER30AP10.034 Where: x H20 = amount of water in an ideal...

Amounts of mercury in soil of some golf course sites

Energy Technology Data Exchange (ETDEWEB)

MacLean, A J; Stone, B; Cordukes, W E

1973-01-01

Mercurial compounds are widely used for controlling diseases of turfgrass of golf courses, but the fungicides are usually confined to the greens. Composite soil samples were obtained from three golf courses in the Ottawa and Ontario region of Canada. Samples from the turf and surface layer of soil were analyzed and high amounts of mercury were found. The soil of No.I course was a sand; No.II was a sandy loam in the surface and a loam below; and No. III was a loam in the surface layer and a clay loam below. The pH of the surface layer was 6.4 in No. I, 7.5 in No. II, and 6.0 in No. III. The amounts of Hg in the turf were high near the green but they decreased with distance. Fairway III contained the highest amounts of Hg and there was evidence of it leaching to a depth of 90 cm at the edge of the green. The particularly high amounts of Hg in no III were in accord with the liberal use of mercurial fungicides on this course in the period 1912-64. The leaching of Hg depends on amounts of organic matter and the clay in the soil.

Direct Analysis in Real Time Mass Spectrometry for the Nondestructive Investigation of Conservation Treatments of Cultural Heritage

Directory of Open Access Journals (Sweden)

Marcello Manfredi

2016-01-01

Full Text Available Today the long-term conservation of cultural heritage is a big challenge: often the artworks were subjected to unknown interventions, which eventually were found to be harmful. The noninvasive investigation of the conservation treatments to which they were subjected to is a crucial step in order to undertake the best conservation strategies. We describe here the preliminary results on a quick and direct method for the nondestructive identification of the various interventions of parchment by means of direct analysis in real time (DART ionization and high-resolution time-of-flight mass spectrometry and chemometrics. The method has been developed for the noninvasive analysis of the Dead Sea Scrolls, one of the most important archaeological discoveries of the 20th century. In this study castor oil and glycerol parchment treatments, prepared on new parchment specimens, were investigated in order to evaluate two different types of operations. The method was able to identify both treatments. In order to investigate the effect of the ion source temperature on the mass spectra, the DART-MS analysis was also carried out at several temperatures. Due to the high sensitivity, simplicity, and no sample preparation requirement, the proposed analytical methodology could help conservators in the challenging analysis of unknown treatments in cultural heritage.

The role of visual and direct force feedback in robotics-assisted mitral valve annuloplasty.

Science.gov (United States)

Currie, Maria E; Talasaz, Ali; Rayman, Reiza; Chu, Michael W A; Kiaii, Bob; Peters, Terry; Trejos, Ana Luisa; Patel, Rajni

2017-09-01

The objective of this work was to determine the effect of both direct force feedback and visual force feedback on the amount of force applied to mitral valve tissue during ex vivo robotics-assisted mitral valve annuloplasty. A force feedback-enabled master-slave surgical system was developed to provide both visual and direct force feedback during robotics-assisted cardiac surgery. This system measured the amount of force applied by novice and expert surgeons to cardiac tissue during ex vivo mitral valve annuloplasty repair. The addition of visual (2.16 ± 1.67), direct (1.62 ± 0.86), or both visual and direct force feedback (2.15 ± 1.08) resulted in lower mean maximum force applied to mitral valve tissue while suturing compared with no force feedback (3.34 ± 1.93 N; P forces on cardiac tissue during robotics-assisted mitral valve annuloplasty suturing, force feedback may be required. Copyright © 2016 John Wiley & Sons, Ltd.

48 CFR 1552.215-74 - Advanced understanding-uncompensated time.

Science.gov (United States)

2010-10-01

... applicable direct labor costs (including applicable indirect costs). (c) Within three weeks after the end of... policy, entitled, ________. (b) Recognizing that the probable cost to the Government for the labor... adjusted amounts shall not be allowable as a direct or indirect cost to this or any other Government...

EFFECTS OF POLISHING TIME AND THERMALCYCLINGON THE MICROLEAKAGE OF FOUR TOOTH –COLOURED DIRECT RESTORATIVE MATERIALS

Directory of Open Access Journals (Sweden)

V MORTAZAVI

2002-09-01

Full Text Available Introdaction. Microleakage has been recognized as a major clinical problem with direct filled dental restorations.The purpose of this study was to investigate and to compare the microleakage of four direct filled tooth-coloured materials, evaluation the effects of polishing time and thermocycling on the microleakage of these materials. Methods. Wedge-shaped class V cavities were prepared on buccal and lingual surfaces of 96 intact extracted human molar teeth. The teeth were randomly divided into three treatment groups and four subgroups. The cavities of each subgroup were filled using one of these materials: a conventional glass ionomer; a resin modified glass ionomer; a composite resin and a compomer. Polishing in the teeth of group 1 was done immediately after placement of restorations and in group 2 one week later. In group 3 delayed polishing and thermocycling (X100 was done. All of the teeth were stored in distilled water for one week and then stained with dye, sectioned, and scored for microleakage on occlusal and cervical edges. Results were statistically analyzed by Kruskal wallis and Mann whitney tests. Results. There was a statistically difference between the microleakage scores of four materials (P < 0.001. Immediately polished glass ionomer and compomer groups have significantly more microleakage than delayed polished groups (P < 0.001. Thermocycting could infulence the microleakage of composite on cervical edges (P < 0.05. Discussion. The precense of differences between the nature of materials and also the surface treatment such as primer or etchant application could influence the microleakage. The prescence of differences in reaction rate between the materials and the time that they reach to their adequate mechanical strength and adhesive bond strength lead to presence of differences between the effect of polishing time on the microleakage scores of materials.

Validation of the direct analysis in real time source for use in forensic drug screening.

Science.gov (United States)

Steiner, Robert R; Larson, Robyn L

2009-05-01

The Direct Analysis in Real Time (DART) ion source is a relatively new mass spectrometry technique that is seeing widespread use in chemical analyses world-wide. DART studies include such diverse topics as analysis of flavors and fragrances, melamine in contaminated dog food, differentiation of writing inks, characterization of solid counterfeit drugs, and as a detector for planar chromatography. Validation of this new technique for the rapid screening of forensic evidence for drugs of abuse, utilizing the DART source coupled to an accurate mass time-of-flight mass spectrometer, was conducted. The study consisted of the determination of the lower limit of detection for the method, determination of selectivity and a comparison of this technique to established analytical protocols. Examples of DART spectra are included. The results of this study have allowed the Virginia Department of Forensic Science to incorporate this new technique into their analysis scheme for the screening of solid dosage forms of drugs of abuse.

Manufacturing Amorphous Solid Dispersions with a Tailored Amount of Crystallized API for Biopharmaceutical Testing.

Science.gov (United States)

Theil, Frank; Milsmann, Johanna; Anantharaman, Sankaran; van Lishaut, Holger

2018-05-07

The preparation of an amorphous solid dispersion (ASD) by dissolving a poorly water-soluble active pharmaceutical ingredient (API) in a polymer matrix can improve the bioavailability by orders of magnitude. Crystallization of the API in the ASD, though, is an inherent threat for bioavailability. Commonly, the impact of crystalline API on the drug release of the dosage form is studied with samples containing spiked crystallinity. These spiked samples possess implicit differences compared to native crystalline samples, regarding size and spatial distribution of the crystals as well as their molecular environment. In this study, we demonstrate that it is possible to grow defined amounts of crystalline API in solid dosage forms, which enables us to study the biopharmaceutical impact of actual crystallization. For this purpose, we studied the crystal growth in fenofibrate tablets over time under an elevated moisture using transmission Raman spectroscopy (TRS). As a nondestructive method to assess API crystallinity in ASD formulations, TRS enables the monitoring of crystal growth in individual dosage forms. Once the kinetic trace of the crystal growth for a certain environmental condition is determined, this method can be used to produce samples with defined amounts of crystallized API. To investigate the biopharmaceutical impact of crystallized API, non-QC dissolution methods were used, designed to identify differences between the various amounts of crystalline materials present. The drug release in the samples manufactured in this fashion was compared to that of samples with spiked crystallinity. In this study, we present for the first time a method for targeted crystallization of amorphous tablets to simulate crystallized ASDs. This methodology is a valuable tool to generate model systems for biopharmaceutical studies on the impact of crystallinity on the bioavailability.

Potentiometric determination of milligram amounts of uranium by semiautomatic titrator

International Nuclear Information System (INIS)

Ryzhinskij, M.V.; Stepanov, A.V.; Preobrazhenskaya, L.D.; Solntseva, L.F.; Gromova, E.A.

1978-01-01

A semiautomatic titrator is described which allows gravimetriotentiometricc-p titrat mg amounts of substances. Milligram amounts of uranium (absolute contents and oxygen/uranium ratio) in U 3 O 8 were determined as an example of the titrator action. The relative standard deviation was less than 0.001

41 CFR 105-56.019 - Offset amount.

Science.gov (United States)

2010-07-01

... Administration 56-SALARY OFFSET FOR INDEBTEDNESS OF FEDERAL EMPLOYEES TO THE UNITED STATES Centralized Salary... referred for offset under this subpart is $100. (b) The amount offset from a salary payment under this... resolved to the satisfaction of GSA. ...

A Moveable Feast: Insects Moving at the Forest-Crop Interface Are Affected by Crop Phenology and the Amount of Forest in the Landscape.

Science.gov (United States)

González, Ezequiel; Salvo, Adriana; Defagó, María Teresa; Valladares, Graciela

2016-01-01

Edges have become prevailing habitats, mainly as a result of habitat fragmentation and agricultural expansion. The interchange of functionally relevant organisms like insects occurs through these edges and can influence ecosystem functioning in both crop and non-crop habitats. However, very few studies have focused on the directionality of insect movement through edges, and the role of crop and non-crop amount has been ignored. Using bi-directional flight interception traps we investigated interchange of herbivore, natural enemy, pollinator and detritivore insects between native forest fragments and soybean crops, simultaneously considering movement direction, forest cover in the landscape and crop phenology. In total, 52,173 specimens and 877 morphospecies were collected. We found that, within most functional and taxonomic groups, movement intensity was similar (richness and/or abundance) between directions, whereas a predominantly forest-to-crop movement characterized natural enemies. Insect movement was extensively affected by crop phenology, decreasing during crop senescence, and was enhanced by forest cover particularly at senescence. Mainly the same herbivore species moved to and from the forest, but different natural enemy species predominated in each direction. Finally, our analyses revealed greater forest contribution to natural enemy than to herbivore communities in the crop, fading with distance to the forest in both groups. By showing that larger amounts of forest lead to richer insect interchange, in both directions and in four functional groups, our study suggests that allocation to natural and cultivated habitats at landscape level could influence functioning of both systems. Moreover, natural enemies seemed to benefit more than pests from natural vegetation, with natural enemy spillover from forests likely contributing to pest control in soybean fields. Thus consequences of insect interchange seem to be mostly positive for the agroecosystem

Surgical training and the European Working Time Directive: The role of informal workplace learning.

Science.gov (United States)

Giles, James A

2010-01-01

The introduction of European Working Time Directive, limiting doctors' working hours to 48 per week, has caused recent controversy within the profession. The Royal College of Surgeons of England in particular has been one of the loudest critics of the legislation. One of the main concerns is regarding the negative impact on training hours for those embarking on surgical careers. Simulation technology has been suggested as a method to overcome this reduction in hospital training hours, and research suggests that this is a good substitute for operative training in a theatre. However, modern educational theory emphasises the power of informal workplace learning in postgraduate education, and the essential role of experience in training future surgeons. Copyright 2010 Surgical Associates Ltd. Published by Elsevier Ltd. All rights reserved.

Sugar amount analysis in food from Lithuanian food market

OpenAIRE

Gudauskaitė, Milda

2015-01-01

When taking too much simple sugar, especially sucrose, harmful health effects occur: more tooth decay occurs, the excess sugar coverts into fat, digestive system gets irritated, increase of weight, possibility in increasing of developing cancer cells, pancreatic and other misbalances in the endocrine organs. Thesis goal: to perform sugar amount analysis in Lithuanian food market Analysis methodology. Assessing the amount of sugar (g/100g) there was analyzed 147 major food la...

A mathematical model for the control of carrier-dependent infectious diseases with direct transmission and time delay

International Nuclear Information System (INIS)

Misra, A.K.; Mishra, S.N.; Pathak, A.L.; Srivastava, P.K.; Chandra, Peeyush

2013-01-01

In this paper, a non-linear delay mathematical model for the control of carrier-dependent infectious diseases through insecticides is proposed and analyzed. In the modeling process, it is assumed that disease spreads due to direct contact between susceptibles and infectives as well as through carriers (indirect contact). Further, it is assumed that insecticides are used to kill carriers and the rate of introduction of insecticides is proportional to the density of carriers with some time lag. The model analysis suggests that as delay in using insecticides exceeds some critical value, the system loses its stability and Hopf-bifurcation occurs. The direction, stability and period of the bifurcating periodic solutions arising through Hopf-bifurcation are also analyzed using normal form concept and center manifold theory. Numerical simulation is carried out to confirm the obtained analytical results

A sorites paradox in the conventional definition of amount of substance

OpenAIRE

Nigel Wheatley

2011-01-01

The conventional definition of amount of substance _n_ is as a quantity proportional to number of entities _N_. This implies that n is discrete for small _N_ while _n_ is considered to be continuous at the macroscopic scale, leading to a sorites paradox. A practical criterion is proposed for distinguishing between amount of substance and number of entities, and the implications for the conventional definition of amount of substance are discussed.

Study on thermal stability and chemical structure of polyamide blended with small amount of Cu

International Nuclear Information System (INIS)

Arai, Tsuyoshi; Ueno, Tomonaga; Kajiya, Takafumi; Ishikawa, Tomoyuki; Takeda, Kunihiko

2007-01-01

The thermal stability and the chemical structure of Polyamide 66 (PA66) blended with a small amount of copper have been studied. The thermal degradation of the blend with 35 ppm or more of copper was restrained and no strong influence of the concentration of copper was observed. The molecular weight of PA66 decreased by the thermal aging process but the amount of decrease of the blend was smaller than that of the non-blend. The water uptake of the blend increased. The chemical structure, which was observed by IR and NMR, changed slightly by blending with copper after aging at higher temperatures. Multiple items influenced the thermal stability of PA66 blended with a small amount of copper instead of just one. Namely, the main chain of PA66 is cut by heat and the degree of the cut is restrained by the copper. The diffusion time of copper atoms that disperse uniformly in the PA66 matrix is short enough to cover the individual amide groups and the effect enlarges the entire configuration of the PA66 chain to enhance the thermal stability. (author)

Direct incorporation of guanosine 5'-diphosphate into microtubules without guanosine 5'-triphosphate hydrolysis

International Nuclear Information System (INIS)

Hamel, E.; Batra, J.K.; Lin, C.M.

1986-01-01

Using highly purified calf brain tubulin bearing [8- 14 C]guanosine 5'-diphosphate (GDP) in the exchangeable nucleotide site and heat-treated microtubule-associated proteins, the authors have found that a significant proportion of exchangeable-site GDP in microtubules can be incorporated directly during guanosine 5'-triphosphate (GTP) dependent polymerization of tubulin, without an initial exchange of GDP for GTP and subsequent GTP hydrolysis during assembly. The precise amount of GDP incorporated directly into microtubules is highly dependent on specific reaction conditions, being favored by high tubulin concentrations, low GTP and Mg 2+ concentrations, and exogenous GDP in the reaction mixture. Minimum effects were observed with changes in reaction pH or temperature, changes in concentration of microtubule-associated proteins, alteration of the sulfonate buffer, or the presence of a calcium chelator in the reaction mixture. Under conditions most favorable for direct GDP incorporation, about one-third of the GDP in microtubules is incorporated directly (without GTP hydrolysis) and two-thirds is incorporated hydrolytically (as a consequence of GTP hydrolysis). Direct incorporation of GDP occurs in a constant proportion throughout elongation, and the amount of direct incorporation probably reflects the rapid equilibration of GDP and GTP at the exchangeable site that occurs before the onset of assembly

42 CFR 405.817 - Principles for determining amount in controversy.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Principles for determining amount in controversy... the Medicare Part B Program § 405.817 Principles for determining amount in controversy. (a) Individual... may assert that the aggregation principles contained in this subpart may be applied to determine the...

An Analysis of the Number of Medical Malpractice Claims and Their Amounts.

Directory of Open Access Journals (Sweden)

Marco Bonetti

Full Text Available Starting from an extensive database, pooling 9 years of data from the top three insurance brokers in Italy, and containing 38125 reported claims due to alleged cases of medical malpractice, we use an inhomogeneous Poisson process to model the number of medical malpractice claims in Italy. The intensity of the process is allowed to vary over time, and it depends on a set of covariates, like the size of the hospital, the medical department and the complexity of the medical operations performed. We choose the combination medical department by hospital as the unit of analysis. Together with the number of claims, we also model the associated amounts paid by insurance companies, using a two-stage regression model. In particular, we use logistic regression for the probability that a claim is closed with a zero payment, whereas, conditionally on the fact that an amount is strictly positive, we make use of lognormal regression to model it as a function of several covariates. The model produces estimates and forecasts that are relevant to both insurance companies and hospitals, for quality assurance, service improvement and cost reduction.

Influence of way of finishing furniture segments on amount emissions VOCs

Directory of Open Access Journals (Sweden)

Petr Čech

2010-01-01

Full Text Available The study deals with the influence of way of finishing furniture segments on amount emissions VOCs (volatile organic compounds. The so-called Volatile Organic Compounds (VOC are among the largest pollution sources of both the internal and external environments.VOC is defined as emission of any organic compound or a mixture thereof, with the exception of methane, whereby the compound exerts the pressure of 0.01 kPa or more at the temperature of 20 °C (293.15 K and reaches the corresponding volatility under the specific conditions of its use and can undergo photochemical reactions with nitrogen oxides when exposed to solar radiation. The effects of VOC upon environment can be described by equation: VOC + NOx + UV radiation + heat = tropospheric ozone (O3In this work there were tested MDF (medium density fibreboard coated by resin impregnated paper was used for the furniture components’ production. Next were tested compressed wood, which was used as a second material of furniture components. These both chosen materials was covered by resin impregnated paper and than sequentially finished by regular coat of finish.An attention of this study is especially put on mentioned factors and on quantity of instant and long-term VOCs emissions emitted from furniture components.The amount of emissions from furniture components, in different phases of the preparation including the resin impregnated paper coating finish, was monitored within the time intervals of 24 hours and 720 hours starting after the time of the finish preparation.The MDF (medium density fibreboard coated by resin impregnated paper was used for the furniture components´ production.A compressed wood was used as a second material of furniture components. This alternative material was covered by resin impregnated paper and than sequentially finished by regular coat of finish.

Real-time measurement of plutonium in air by direct-inlet surface ionization mass spectrometry. Status report

International Nuclear Information System (INIS)

Stoffels, J.J.

1980-04-01

A new technique is being developed for monitoring low-level airborne plutonium on a real-time basis. The technique is based on surface ionization mass spectrometry of airborne particles. It will be capable of measuring plutonium concentrations below the maximum permissible concentration (MPC) level. A complete mass spectrometer was designed and constructed for this purpose. Major components which were developed and made operational for the instrument include an efficient inlet for directly sampling particles in air, a wide dynamic range ion detector and a minicomputer-based ion-burst measurement system. Calibration of the direct-inlet mass spectrometer (DIMS) was initiated to establish the instrument's response to plutonium dioxide as a function of concentration and particle size. This work revealed an important problem - bouncing of particles upon impact with the ionizing filament. Particle bounce results in a significant loss of measurement sensitivity. The feasibility of using an oven ionizer to overcome the particle bounce problem has been demonstrated. A rhenium oven ionizer was designed and constructed for the purpose of trapping particles which enter via the direct inlet. High-speed particles were trapped in the oven yielding a measurement sensitivity comparable to that for particles which are preloaded. Development of the Pu DIMS can now be completed by optimizing the oven design and calibrating the instrument's performance with UO 2 and CeO 2 particles as analogs to PuO 2 particles

FOREIGN DIRECT INVESTEMENTS FLOWS IN BLACK SEA ECONOMIC COOPERATION

Directory of Open Access Journals (Sweden)

RADU-MARCEL JOIA

2011-04-01

Full Text Available We live in a time when the world’s economy is in a constantly change. Foreign direct investments flows are in actual economy one of the most dynamic and prospective part of the world’s economy being in a continuous globalization. These international financial flows determine the traders who take part at the world’s economy to know to adopt a specific management in the international affairs field. We are viewers of an unprecedented expansion of foreign direct investments. The main objective of the paper is to analyze the foreign direct investments flows in Black Sea Economic Cooperation. This study is based on UNCTAD reports and on an econometrical model which gives us the possibility to create different analysis concerning FDI flow in this cooperation. So we defined a simple regression model, in which the dependent variable is represented by Nominal and real GDP, total and per capita, variable explicated by FDI flows, using as method the Least Squared, including 19 observations. Through this paper, we tried to illustrate the relation between the FDI flows and the economic growth rate in the past years inRomania, member of Black Sea Economic region. In line with a general upward trend in FDI to Central and Eastern Europe, inward FDI to the Russian Federation held steady between 1998 and 2001, at an annual average of $2.8 billion. In Black Sea Economic region, Russian average is the biggest one, Russia being a leader country in warding FDI. The Russian Federation is by far the leading investor country in the region, accounting for more than 75% of its annual outflows. Inward and outward direct investments flows in Russia have reached in 2009 an amount of $38,722 billion. In Romania, following years of stagnation at very low levels, 1991 to 1997, FDI flows reached $1.1 billion in 2002. Inflows to Bulgaria peaked at $1 billion in 2000; the surge is largely due to flows from developed countries. Inward and outward direct investments flows in

Direct reconstruction of pharmacokinetic parameters in dynamic fluorescence molecular tomography by the augmented Lagrangian method

Science.gov (United States)

Zhu, Dianwen; Zhang, Wei; Zhao, Yue; Li, Changqing

2016-03-01

Dynamic fluorescence molecular tomography (FMT) has the potential to quantify physiological or biochemical information, known as pharmacokinetic parameters, which are important for cancer detection, drug development and delivery etc. To image those parameters, there are indirect methods, which are easier to implement but tend to provide images with low signal-to-noise ratio, and direct methods, which model all the measurement noises together and are statistically more efficient. The direct reconstruction methods in dynamic FMT have attracted a lot of attention recently. However, the coupling of tomographic image reconstruction and nonlinearity of kinetic parameter estimation due to the compartment modeling has imposed a huge computational burden to the direct reconstruction of the kinetic parameters. In this paper, we propose to take advantage of both the direct and indirect reconstruction ideas through a variable splitting strategy under the augmented Lagrangian framework. Each iteration of the direct reconstruction is split into two steps: the dynamic FMT image reconstruction and the node-wise nonlinear least squares fitting of the pharmacokinetic parameter images. Through numerical simulation studies, we have found that the proposed algorithm can achieve good reconstruction results within a small amount of time. This will be the first step for a combined dynamic PET and FMT imaging in the future.

A change of direction in the Dutch health care system?

Science.gov (United States)

Lapré, R M

1988-08-01

The Dutch health care system seems to be undergoing a clear change of direction. The publication of the Report of the Committee of the Structure and Financing of the Health Care System is a prominent document which marks the emergence of a new trend. After an analysis of the characteristics of the Dutch health care system in the periods 1960-1975 and 1975-1985, an account is given of the most important proposals of the committee. The proposals clearly alter the trend towards more governmental involvement. They envisage a more market-oriented approach and freedom of operation while at the same time paying attention to aspects such as solidarity and social justice. The Committee's suggestions include the introduction of a basic insurance scheme for every citizen with a coverage determined by law, and in addition a voluntary supplementary insurance scheme in which the insured can decide what coverage he requires and that the insurer is obliged to accept him. The fact that there is a certain amount of agreement, at least over the direction that the strategy for change should take, justifies the expectation that many of the committee's proposals will be implemented.

41 CFR 105-56.029 - Offset amount.

Science.gov (United States)

2010-07-01

... Administration 56-SALARY OFFSET FOR INDEBTEDNESS OF FEDERAL EMPLOYEES TO THE UNITED STATES Centralized Salary... salary offset under this subpart is $100. (b) The amount offset from a salary payment under this subpart... otherwise resolved to the satisfaction of the creditor agency. ...

9 CFR 381.412 - Reference amounts customarily consumed per eating occasion.

Science.gov (United States)

2010-01-01

... Amount Ready-to-serve Reference Amount Ready-to-cook Egg mixtures, (western style omelet, souffle, egg... cook poultry cuts, including marinated, tenderized, injected cuts of poultry, poultry corn dogs...

Aspect ratio control of Au nanorods via covariation of the total amount of HAuCl{sub 4} and ascorbic acid

Energy Technology Data Exchange (ETDEWEB)

Ma, Xiao [State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, 122 Luoshi Road, Hongshan District, Wuhan 430070, Hubei (China); Wang, Moo-Chin, E-mail: mcwang@kmu.edu.tw [Department of Fragrance and Cosmetic Science, Kaohsiung Medical University, 100 Shih-Chuan 1st Road, Kaohsiung 80708, Taiwan (China); Feng, Jinyang [State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, 122 Luoshi Road, Hongshan District, Wuhan 430070, Hubei (China); Zhao, Xiujian, E-mail: opluse@whut.edu.cn [State Key Laboratory of Silicate Materials for Architectures, Wuhan University of Technology, 122 Luoshi Road, Hongshan District, Wuhan 430070, Hubei (China)

2015-07-15

Highlights: • The AR value decreased as the total amount of [HAuCl{sub 4}] and [AA] increasing. • The UV–vis absorption spectra showed the peak wavelength of TSPR at around 530 nm. • The wavelength of LSPR had a red-shifted effect. - Abstract: Controlling the aspect ratio (AR) of gold nanorods (GNRs) via covariation of the total concentrations of HAuCl{sub 4} ([HAuCl{sub 4}]) and ascorbic acid ([AA]) has been studied. Characteristics of GNRs were examined by transmission electron microscopy (TEM) and ultraviolet–visible (UV–vis) absorption spectrophotometry. TEM results showed that single crystalline GNRs grew along an elongated growth direction of [100]. TEM results also revealed that the quantity of plate shaped and nearly spherical nanoparticles increased as the total amount of [HAuCl{sub 4}] and [AA] decreased. The AR value measured from TEM images decreased from 4.74 to 2.41 as the total amount of [HAuCl{sub 4}] and [AA] was increased from 0.305 to 2.44 mM. The UV–vis absorption spectra of all samples showed that the wavelength of transverse surface plasmon resonance (TSPR) peak appeared at around 530 nm for all samples. The wavelength of longitudinal surface plasmon resonance (LSPR) peak increased from 640 to 894 nm as the total amount of [HAuCl{sub 4}] and [AA] decreased from 2.44 to 0.305 mM. The wavelength of LSPR peak shows a red-shifted effect except when the total amount of [HAuCl{sub 4}] and [AA] was 0.122 mM.

Microorganisms direct identification from blood culture by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry.

Science.gov (United States)

Ferreira, L; Sánchez-Juanes, F; Porras-Guerra, I; García-García, M I; García-Sánchez, J E; González-Buitrago, J M; Muñoz-Bellido, J L

2011-04-01

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) allows a fast and reliable bacterial identification from culture plates. Direct analysis of clinical samples may increase its usefulness in samples in which a fast identification of microorganisms can guide empirical treatment, such as blood cultures (BC). Three hundred and thirty BC, reported as positive by the automated BC incubation device, were processed by conventional methods for BC processing, and by a fast method based on direct MALDI-TOF MS. Three hundred and eighteen of them yield growth on culture plates, and 12 were false positive. The MALDI-TOF MS-based method reported that no peaks were found, or the absence of a reliable identification profile, in all these false positive BC. No mixed cultures were found. Among these 318 BC, we isolated 61 Gram-negatives (GN), 239 Gram-positives (GP) and 18 fungi. Microorganism identifications in GN were coincident with conventional identification, at the species level, in 83.3% of BC and, at the genus level, in 96.6%. In GP, identifications were coincident with conventional identification in 31.8% of BC at the species level, and in 64.8% at the genus level. Fungaemia was not reliably detected by MALDI-TOF. In 18 BC positive for Candida species (eight C. albicans, nine C. parapsilosis and one C. tropicalis), no microorganisms were identified at the species level, and only one (5.6%) was detected at the genus level. The results of the present study show that this fast, MALDI-TOF MS-based method allows bacterial identification directly from presumptively positive BC in a short time (<30 min), with a high accuracy, especially when GN bacteria are involved. © 2010 The Authors. Clinical Microbiology and Infection © 2010 European Society of Clinical Microbiology and Infectious Diseases.

Analysis and Design of Bi-Directional DC-DC Converter in the Extended Run Time DC UPS System Based on Fuel Cell and Supercapacitor

DEFF Research Database (Denmark)

Zhang, Zhe; Thomsen, Ole Cornelius; Andersen, Michael A. E.

2009-01-01

Abstract-In this paper, an extended run time DC UPS system structure with fuel cell and supercapacitor is investigated. A wide input range bi-directional dc-dc converter is described along with the phase-shift modulation scheme and phase-shift with duty cycle control, in different modes. The deli......Abstract-In this paper, an extended run time DC UPS system structure with fuel cell and supercapacitor is investigated. A wide input range bi-directional dc-dc converter is described along with the phase-shift modulation scheme and phase-shift with duty cycle control, in different modes...

Effects of sample injection amount and time-of-flight mass spectrometric detection dynamic range on metabolome analysis by high-performance chemical isotope labeling LC-MS.

Science.gov (United States)

Zhou, Ruokun; Li, Liang

2015-04-06

The effect of sample injection amount on metabolome analysis in a chemical isotope labeling (CIL) liquid chromatography-mass spectrometry (LC-MS) platform was investigated. The performance of time-of-flight (TOF) mass spectrometers with and without a high-dynamic-range (HD) detection system was compared in the analysis of (12)C2/(13)C2-dansyl labeled human urine samples. An average of 1635 ± 21 (n = 3) peak pairs or putative metabolites was detected using the HD-TOF-MS, compared to 1429 ± 37 peak pairs from a conventional or non-HD TOF-MS. In both instruments, signal saturation was observed. However, in the HD-TOF-MS, signal saturation was mainly caused by the ionization process, while in the non-HD TOF-MS, it was caused by the detection process. To extend the MS detection range in the non-HD TOF-MS, an automated switching from using (12)C to (13)C-natural abundance peaks for peak ratio calculation when the (12)C peaks are saturated has been implemented in IsoMS, a software tool for processing CIL LC-MS data. This work illustrates that injecting an optimal sample amount is important to maximize the metabolome coverage while avoiding the sample carryover problem often associated with over-injection. A TOF mass spectrometer with an enhanced detection dynamic range can also significantly increase the number of peak pairs detected. In chemical isotope labeling (CIL) LC-MS, relative metabolite quantification is done by measuring the peak ratio of a (13)C2-/(12)C2-labeled peak pair for a given metabolite present in two comparative samples. The dynamic range of peak ratio measurement does not need to be very large, as only subtle changes of metabolite concentrations are encountered in most metabolomic studies where relative metabolome quantification of different groups of samples is performed. However, the absolute concentrations of different metabolites can be very different, requiring a technique to provide a wide detection dynamic range to allow the detection of as

Effects of the amount and schedule of varied practice after constant practice on the adaptive process of motor learning

Directory of Open Access Journals (Sweden)

Umberto Cesar Corrêa

2014-12-01

Full Text Available This study investigated the effects of different amounts and schedules of varied practice, after constant practice, on the adaptive process of motor learning. Participants were one hundred and seven children with a mean age of 11.1 ± 0.9 years. Three experiments were carried out using a complex anticipatory timing task manipulating the following components in the varied practice: visual stimulus speed (experiment 1; sequential response pattern (experiment 2; and visual stimulus speed plus sequential response pattern (experiment 3. In all experiments the design involved three amounts (18, 36, and 63 trials, and two schedules (random and blocked of varied practice. The experiments also involved two learning phases: stabilization and adaptation. The dependent variables were the absolute, variable, and constant errors related to the task goal, and the relative timing of the sequential response. Results showed that all groups worsened the performances in the adaptation phase, and no difference was observed between them. Altogether, the results of the three experiments allow the conclusion that the amounts of trials manipulated in the random and blocked practices did not promote the diversification of the skill since no adaptation was observed.

The impact of a Critical Care Information System (CCIS) on time spent charting and in direct patient care by staff in the ICU: a review of the literature.

Science.gov (United States)

Mador, Rebecca L; Shaw, Nicola T

2009-07-01

The introduction of a Critical Care Information System (CCIS) into an intensive care unit (ICU) is purported to reduce the time health care providers (HCP) spend on documentation and increase the time available for direct patient care. However, there is a paucity of rigorous empirical research that has investigated these assertions. Moreover, those studies that have sought to elucidate the relationship between the introduction of a CCIS and the time spent by staff on in/direct patient care activities have published contradictory findings. The objective of this literature review is to establish the impact of a CCIS on time spent documenting and in direct patient care by staff in the ICU. Five electronic databases were searched including PubMed Central, EMBASE, CINAHL, IEEE Xplore, and the Cochrane Database of Systematic Reviews. Reference lists of all published papers were hand searched, and citations reviewed to identify extra papers. We included studies that were empirical articles, published in English, and provided original data on the impact of a CCIS on time spent documenting and in direct patient care by staff in the ICU. In total, 12 articles met the inclusion criteria. Workflow analysis (66%) and time-and-motion analysis (25%) were the most common forms of data collection. Three (25%) studies found an increase in time spent charting, five (42%) found no difference, and four (33%) studies reported a decrease. Results on the impact of a CCIS on direct patient care were similarly inconclusive. Due to the discrepant findings and several key methodological issues, the impact of a CCIS on time spent charting and in direct patient care remains unclear. This review highlights the need for an increase in rigorous empirical research in this area and provides recommendations for the design and implementation of future studies.

Direct 13C NMR Detection in HPLC Hyphenation Mode

DEFF Research Database (Denmark)

Wubshet, Sileshi Gizachew; Johansen, Kenneth; Nyberg, Nils

2012-01-01

Solid phase extraction (SPE) was introduced as a crucial step in the HPLC-SPE-NMR technique to enable online analyte enrichment from which proton-detected NMR experiments on submicrogram amounts from complex mixtures were possible. However, the significance of direct-detected (13)C NMR experiments...... application of HPLC-SPE-NMR analysis using direct-detected (13)C NMR spectra. HPLC column loading, accumulative SPE trappings, and the effect of different elution solvents were evaluated and optimized. A column loading of approximately 600 mug of a prefractionated triterpenoid mixture, six trappings...

A simple spectrophotometric determination of trace amounts of vanadium using thionin

Directory of Open Access Journals (Sweden)

Tom Cherian

2005-12-01

Full Text Available A simple and sensitive spectrophotometric method has been developed for the determination of trace amounts of vanadium using thionin as a chromogenic reagent. The proposed method is based on the reaction of vanadium(V with potassium iodide in acid medium to liberate iodine, which bleaches the violet colour of thionin and is measured at 600 nm. This decrease in absorbance is directly proportional to the vanadium(V concentration and obeys Beer's law in the range of 0.2-10 μgmL-1 of V(V. The molar absorptivity, Sandell's sensitivity, detection limit and quantitation limit of the method were found to be 2.298 x 104 Lmol-1cm-1, 0.52 x 10-2 μgcm-2, 0.035 μgmL-1 and 0.11 μgmL-1, respectively. The optimum reaction conditions and other analytical conditions were evaluated. The effect of interfering ions on the determination is described. The developed method has been successfully applied to the analysis of the vanadium in synthetic and alloy samples.

Change in the direct cost of treatment for children and adolescents with hyperkinetic disorder in Germany over a period of four years

Directory of Open Access Journals (Sweden)

Rothenberger Aribert

2009-01-01

Full Text Available Abstract Background In many developed countries, the treatment of hyperkinetic disorder (or ADHD consumes a considerable amount of resources. The primary aim of this study was to determine change in the direct cost of treatment for children and adolescents with hyperkinetic disorder in Germany over time, and compare the cost with the cost of treatment for two physical disorders: epilepsy and asthma. Methods The German Federal Statistical Office provided data on the direct cost of treating hyperkinetic disorder, epilepsy and asthma in Germany for 2002, 2004, and 2006. The direct costs of treatment incurred by hyperkinetic disorder in these years were compared with those incurred by epilepsy and asthma. Results The total direct cost of treatment for the hyperkinetic disorder was € 177 million in 2002, € 234 million in 2004, and € 341 million in 2006. The largest proportion of the cost was incurred by the age group Conclusion The direct cost of treatment for hyperkinetic disorder in the age group

46 CFR 308.300 - Insured amount-application.

Science.gov (United States)

2010-10-01

... Shipping MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION EMERGENCY OPERATIONS WAR RISK INSURANCE Second Seamen's War Risk Insurance § 308.300 Insured amount—application. An applicant for Second Seamen's war risk insurance shall not state the amount of insurance desired, which shall be as provided in...

Detection of tiny amounts of fissile materials in large-sized containers with radioactive waste

Science.gov (United States)

Batyaev, V. F.; Skliarov, S. V.

2018-01-01