The combined effect of fertiliser nitrogen and phosphorus on herbage yield and change in soil nutrients of a grass/clover and grass-only sward

NARCIS (Netherlands)

Schils, R.L.M.; Snijders, P.J.M.

2004-01-01

The combined effect of reduced nitrogen ( N ) and phosphorus ( P ) application on the production of grass- only and grass/ clover swards was studied in a five- year cutting experiment on a marine clay soil, established on newly sown swards. Furthermore, changes in soil N, P and carbon ( C ) were

Agronomical characteristics of elephant grass variety “roxo” in different cut ages in Cuiabana Lowlands Características agronômicas do capim-elefante roxo em diferentes idades de corte na Depressão Cuiabana

Directory of Open Access Journals (Sweden)

Rosane Cláudia Rodrigues

2008-09-01

Full Text Available At this work was evaluated the effect of cut age variation of “Roxo” elephant grass under its agronomical parameters, as yield, height, stem:leave relation and leave proportion. The grass was cultivated on farm located in Santo Antonio of Leverger – MT. The area was divided in paddocks with 10, 40m2, that were submitted to different cut age, 30, 45, 60, 75, 90 and 105 days, during the dry and rainy season, in a randomized block arrange, with four repetions by treatment. After cut, data of yield/ha, height, leave proportion and leave:stem relation were collected. On each age, the paddock grass was cut, weighted and guided to the animal nutrition laboratory at UFMT for dry matter determination. In the dry season, the increase on elephant grass cut age caused quadratic effect in all variables evaluated, except for the grass height, that was linearly incremented. On rainy season, the advance in grass cut age affected, in a linear way, the analyzed variables and promoted increase on dry matter production and height of grass, but reduction at the leaf percentage and leaf/steam ration.Objetivou-se, com este trabalho, avaliar o efeito da variação na idade de corte do capim elefante variedade roxa (Pennisetum purpureum cv. Napier roxo sobre as suas características agronômicas, como produtividade, altura, relação colmo:folha e diâmetro do colmo. O capim foi cultivado em área de capineira, localizada no município de Santo Antônio do Leverger – MT. A área foi dividida em parcelas com área útil de 10,40m² cada, submetidas a diferentes idades de corte, 30, 45, 60, 75, 90 e 105 dias, durante as épocas das águas e de seca, em um delineamento em blocos ao acaso com 4 repetições. Após o corte efetuado rente ao solo, foram realizadas as seguintes avaliações: produtividade/ha, altura médias das plantas, relação folha:colmo, diâmetro dos colmos e percentagem de folhas. Em cada idade, o capim proveniente da área útil da parcela foi

Forage growth, yield and quality responses of Napier hybrid grass cultivars to three cutting intervals in the Himalayan foothills

Directory of Open Access Journals (Sweden)

Kesang Wangchuk

2015-09-01

Full Text Available A 3 x 3 factorial study was conducted in the southern foothills of Bhutan to compare 3 cultivars of Napier hybrid grass (Pennisetum purpureum x P. glaucum: Pakchong-1, CO-3 and Giant Napier, at 3 cutting intervals (40, 60 and 80 days, in terms of forage growth, dry matter (DM yield and crude protein (CP concentration. The effects of cultivar x cutting interval were significant only on tiller number per plant and leaf:stem ratio (LSR. CO-3 consistently produced the highest tiller number per plant, leaves per plant and LSR, while Pakchong-1 produced the lowest. Pakchong-1 plants were taller, had bigger tillers and basal circumference and higher stem DM production than CO-3 and Giant. Leaf CP for all cultivars was about 17%, while stem CP concentration was lower for Pakchong-1 than for the other cultivars (3.6 vs. 5.3%, P<0.05. While 40-day cutting intervals produced high quality forage, yields suffered marked-ly and the best compromise between yield and quality of forage seemed to occur with 60-day cutting intervals. Pakchong-1 seems to have no marked advantages over CO-3 and Giant for livestock feed, and feeding studies would verify this. Its higher stem DM yields may be advantageous for biogas production and this aspect should be investigated.Keywords: Bhutan, CO-3, crude protein , dry matter, Giant Napier, Pakchong-1.DOI: 10.17138/TGFT(3142-150

Lifetime information from correlation functions selected by directional cuts

International Nuclear Information System (INIS)

Gelbke, C.K.

1995-01-01

Two-particle correlation functions provide information on the space-time characteristics of the emitting source. In many cases, ambiguities of the relative magnitudes of source radius and lifetime can be reduced by analysis of correlation functions evaluated for specific directional cuts on the relative velocity of the coincident particle pair. Information on non-spherical breakup geometries is more difficult to extract. Examples of two-proton correlation functions in which directional cuts are employed to reduce existing space-time ambiguities for the emitting system are presented. (author). 50 refs., 10 figs

Recycling stabilised/solidified drill cuttings for forage production in acidic soils.

Science.gov (United States)

Kogbara, Reginald B; Dumkhana, Bernard B; Ayotamuno, Josiah M; Okparanma, Reuben N

2017-10-01

Stabilisation/solidification (S/S), which involves fixation and immobilisation of contaminants using cementitious materials, is one method of treating drill cuttings before final fate. This work considers reuse of stabilised/solidified drill cuttings for forage production in acidic soils. It sought to improve the sustainability of S/S technique through supplementation with the phytoremediation potential of plants, eliminate the need for landfill disposal and reduce soil acidity for better plant growth. Drill cuttings with an initial total petroleum hydrocarbon (TPH) concentration of 17,125 mg kg -1 and low concentrations of metals were treated with 5%, 10%, and 20% cement dosages. The treated drill cuttings were reused in granular form for growing a forage, elephant grass (Pennisetum purpureum), after mixing with uncontaminated soil. The grasses were also grown in uncontaminated soil. The phytoremediation and growth potential of the plants was assessed over a 12-week period. A mix ratio of one part drill cuttings to three parts uncontaminated soil was required for active plant growth. The phytoremediation ability of elephant grass (alongside abiotic losses) reduced the TPH level (up to 8795 mg kg -1 ) in the soil-treated-drill cuttings mixtures below regulatory (1000 mg kg -1 ) levels. There were also decreased concentrations of metals. The grass showed better heights and leaf lengths in soil containing drill cuttings treated with 5% cement dosage than in uncontaminated soil. The results suggest that recycling S/S treated drill cuttings for forage production may be a potential end use of the treated waste. Copyright © 2017 Elsevier Ltd. All rights reserved.

BUFFEL GRASS MORPHOAGRONOMIC CHARACTERIZATION FROM Cenchrus GERMPLASM ACTIVE BANK

Directory of Open Access Journals (Sweden)

LEILA REGINA GOMES PASSOS BRUNO

2017-01-01

Full Text Available his study aimed to characterize buffel grass accessions of the Cenchrus Germplasm Active Bank (CGAB from Embrapa Semi - Arid in a morphoagronomic way, checking the descriptors variability and efficiency in accessions on two consecutive cuts. Twenty - five accessions and five buffel grass cultivars were used in randomized complete block design with three replications. Evaluations were conducted after two consecutive cuts, each evaluation performed 90 days after each cut. Characterization was based on 15 quantitative and qualitative morphoagronomic descriptors. Quantitative descriptors were subjected to individual and joint univariate analysis of variance, followed by the Scott - Knott’s test at 5% significance. Yet qualitative descriptors were submitted to descriptive analysis. Both quantitative and qualitative descriptors were grouped based on the Gower algorithm for divergence analysis. A dendrogram and calculations of the characters relative importance for divergence were established. Genotype and cutting effects were significant for almost all descriptors in the joint analysis. This result indicates a genetic variability between genotypes and, regarding the cut, it indicates mainly differences in growth rate of each genotype in each cutting season. Genotypes were separated into three groups, which showed good genotype variation. The number of tillers per clump, followed by number of inflorescence and color of seeds, were the most relevant characters in genotype separation.

Degradation in the fatigue strength of dentin by diamond bur preparations: Importance of cutting direction.

Science.gov (United States)

Majd, B; Majd, H; Porter, J A; Romberg, E; Arola, D

2016-01-01

The objectives of this investigation were to evaluate the degradation in fatigue strength of dentin by diamond bur preparations and to identify the importance of cutting direction. Three groups of coronal dentin specimens were prepared from unrestored third molars, including a flaw free "control," and two groups that received a diamond bur cutting treatment performed parallel or perpendicular to the specimen length. The specimens were subjected to static or cyclic flexural loading to failure and the results were compared with data for carbide bur cutting. Under static loading diamond bur cutting resulted in significantly lower flexure strength (p ≤ 0.05) than the control for both cutting directions (from 154 to ∼124 MPa). However, there was no significant difference in the strength between the control and carbide bur treated specimens. Similarly, the fatigue strength of the diamond bur treated specimens was significantly lower (p ≤ 0.0001) than that of the control for both cutting directions. Cutting in the perpendicular direction resulted in nearly 60% reduction to the endurance limit (from 44 to 19 MPa). Based on the results, diamond bur cutting of cavity preparations causes a reduction in the fatigue strength of dentin, regardless of the cutting direction. To maintain the durability of dentin, cavity preparations introduced using diamond burs must be performed with appropriate cutting direction and followed by a finishing pass. © 2014 Wiley Periodicals, Inc.

Forage tree legumes. II. Investigation of nitrogen transfer to an associated grass using a split-root technique

International Nuclear Information System (INIS)

Catchpoole, D.W.; Blair, G.J.

1990-01-01

The glasshouse study reported, employed a split-root technique, whereby trees of leucaena and gliricidia were grown in boxes with 15 N fed to one half of the root system and the transfer of N to the other half of the box was measured by sampling tree and planted grass. Detection of 15 N in the grass tops and roots from the unlabelled half of the box was used to indicate N transfer from the tree roots to the grass. Transfer of labelled N to the grass amounted to 4.1% in the first 6 week period when 15 N was being injected in the tree root zone. A harvest of the tree and grass was made at 6 weeks and both allowed to regrow for a further 6 weeks with no further addition of 15 N. Over the entire 12 week experimental period 7.6% of the labelled N from the tree was transferred to the grass. The low proportion of N transferred from tree legume to the grass in this experiment, where herbage was cut and removed, is similar to the findings in the earlier field experiment and indicates that, in such a system, little direct beneficial effect of N fixation would be expected in an understorey grass or food crop. 24 refs., 4 tabs

Study of Effect of Impacting Direction on Abrasive Nanometric Cutting Process with Molecular Dynamics.

Science.gov (United States)

Li, Junye; Meng, Wenqing; Dong, Kun; Zhang, Xinming; Zhao, Weihong

2018-01-11

Abrasive flow polishing plays an important part in modern ultra-precision machining. Ultrafine particles suspended in the medium of abrasive flow removes the material in nanoscale. In this paper, three-dimensional molecular dynamics (MD) simulations are performed to investigate the effect of impacting direction on abrasive cutting process during abrasive flow polishing. The molecular dynamics simulation software Lammps was used to simulate the cutting of single crystal copper with SiC abrasive grains at different cutting angles (0 o -45 o ). At a constant friction coefficient, we found a direct relation between cutting angle and cutting force, which ultimately increases the number of dislocation during abrasive flow machining. Our theoretical study reveal that a small cutting angle is beneficial for improving surface quality and reducing internal defects in the workpiece. However, there is no obvious relationship between cutting angle and friction coefficient.

Comparison between Urea and Goat Manure as Sources of Nitrogen for Napier Grass Grown on Terraced Hill

Directory of Open Access Journals (Sweden)

Rahman, M.M.

2016-12-01

Full Text Available Effects of two nitrogen (N sources on dry matter (DM yield and nutritive value of Napier grass were evaluated. The nitrogen (N fertiliser (at rate of 300 kg N ha?1 year?1 was applied by dividing the terraces of a hill under two treatments: T1 (urea and T2 (goat manure. There were three replicates of each treatment arranged within three blocks in a completely randomised design. Grass was cut at about 60?day interval. In the first to fourth harvests, grass receiving manure had higher plant height than those with urea application. Grass receiving manure had higher DM yield than urea in almost all of the cuttings. In the fourth harvest, grass receiving urea contained higher DM and organic matter (OM than manure. Similar result was found for fifth harvest where urea gave higher crude protein (CP than manure. Irrespective of harvesting frequencies, average DM, OM, CP and neutral detergent fibre contents were not significantly different between grasses fertilised with manure and urea. In conclusion, manure is recommended for economical cultivation of Napier grass on terrace of hill.

Digital 3D reconstruction of Agustin de Betancourt's historical heritage: the machine for cutting grass in waterways

Directory of Open Access Journals (Sweden)

José Ignacio Rojas-Sola

2016-05-01

Full Text Available Agustín de Betancourt y Molina was one of the most distinguished engineers of the eighteenth and nineteenth centuries with numerous contributions to various fields of engineering, including civil engineering. This research shows the process followed in the documentation of the cultural heritage of that Canary engineer, especially in the geometric documentation of a machine for cutting grass in waterways presented in England in 1795 after three years researching on theory of machines. The baseline information has been recovered from the Canary Orotava Foundation of History of Science who has spent years collecting information about the Project Betancourt, in particular, planimetric information as well as a small report on its operation and description of parts of machine. From this information, we have constructed a three dimensional (3D model using CAD techniques with the use of Solid Edge ST7 parametric software, which has enabled the team to create the 3D model as well as different detail plans and exploded views.

Swine wastewater treatment using vertical subsurface flow constructed wetland planted with Napier grass

Directory of Open Access Journals (Sweden)

Pantip Klomjek

2016-09-01

Full Text Available This research aims to investigate the pollutant removal efficiencies in swine wastewater using a vertical subsurface flow constructed wetland (VSF CW planted with two species of Napier grass. The grass productivities were also cultivated and compared in order to provide information for species selection. Twelve treatment units were set up with the VSF CWs planted with Giant Napier grass (Pennisetum purpureum cv. King grass and Dwarf Napier grass (Pennisetum purpureum cv. Mott. with 2 and 5 cm d−1 of hydraulic loading rates (HLR. Comparisons of removal efficiency and grass productivity were analyzed using Duncan's Multiple Range Test and t-test at the significant level 0.05. Both species of Napier grass performed more than 70% of removal efficiency of BOD and TKN. The VSF CW planted with Giant Napier grass at 5 cm d−1 HLR performed the highest BOD removal efficiency of 94 ± 1%, while the 2 cm d−1 HLR removed COD with efficiency of 64 ± 6%. The results also showed the effluent from all treatment units contained averages of BOD, COD, TSS, TKN and pH that followed Thailand's swine wastewater quality standard. Average fresh yields and dry yields were between 4.6 ± 0.4 to 15.2 ± 1.2 and 0.5 ± 0.1 to 2.2 ± 0.1 kg m−2, respectively. The dry yields obtained from four cutting cycles in five months of CW system operation were higher than the ones planted with a traditional method, but declined continuously after each cutting cycle. Both species of Napier grass indicated their suitability to be used in the VSF CW for swine wastewater treatment.

Simulating the effect of conditioning on the drying of cut grass

NARCIS (Netherlands)

Lorenzi, de F.; Bosma, A.H.; Stanghellini, C.

1996-01-01

Field wilting and drying of hay is an important agricultural process upon which the quality of material subsequently conserved is dependent. The research described here aims at translating the biophysical processes that affect field drying of grass into parameters sets to be used for decision

Field Robotics in Sports: Automatic Generation of guidance Lines for Automatic Grass Cutting, Striping and Pitch Marking of Football Playing Fields

Directory of Open Access Journals (Sweden)

Ole Green

2011-03-01

Full Text Available Progress is constantly being made and new applications are constantly coming out in the area of field robotics. In this paper, a promising application of field robotics in football playing fields is introduced. An algorithmic approach for generating the way points required for the guidance of a GPS-based field robotic through a football playing field to automatically carry out periodical tasks such as cutting the grass field, pitch and line marking illustrations and lawn striping is represented. The manual operation of these tasks requires very skilful personnel able to work for long hours with very high concentration for the football yard to be compatible with standards of Federation Internationale de Football Association (FIFA. In the other side, a GPS-based guided vehicle or robot with three implements; grass mower, lawn stripping roller and track marking illustrator is capable of working 24 h a day, in most weather and in harsh soil conditions without loss of quality. The proposed approach for the automatic operation of football playing fields requires no or very limited human intervention and therefore it saves numerous working hours and free a worker to focus on other tasks. An economic feasibility study showed that the proposed method is economically superimposing the current manual practices.

Feature soil, growth and chemical composition of grass in tifton fertilization and irrigation of aquaculture with wastewater

OpenAIRE

Francisca Mirlanda Vasconcelos Furtado

2015-01-01

This work was carried out to evaluate the effects of nitrogen fertilization in areas of irrigated pastures with biofertilizados effluents from fish farming. Four doses of nitrogen fertilizer were used for 3 cycles of Tifton-85 grass cut every 28 days and irrigated with wastewater from fish farming. After each cutting the grass was fertilized with the respective doses of fertilizer. The design was completely randomized in a factorial 2 x 4 with four replicates. Four doses of nitrogen fertilize...

Theoretical and experimental aspects of laser cutting with a direct diode laser

Science.gov (United States)

Costa Rodrigues, G.; Pencinovsky, J.; Cuypers, M.; Duflou, J. R.

2014-10-01

Recent developments in beam coupling techniques have made it possible to scale up the power of diode lasers with a laser beam quality suitable for laser cutting of metal sheets. In this paper a prototype of a Direct Diode Laser (DDL) source (BPP of 22 mm-mrad) is analyzed in terms of efficiency and cut performance and compared with two established technologies, CO2 and fiber lasers. An analytical model based on absorption calculations is used to predict the performance of the studied laser source with a good agreement with experimental results. Furthermore results of fusion cutting of stainless steel and aluminium alloys as well as oxygen cutting of structural steel are presented, demonstrating that industrial relevant cutting speeds with high cutting quality can now be achieved with DDL.

Measurement and modelling ozone fluxes over a cut and fertilized grassland

Directory of Open Access Journals (Sweden)

R. Mészáros

2009-10-01

Full Text Available During the GRAMINAE Integrated Experiment between 20 May and 15 June 2000, the ozone flux was measured by the eddy covariance method above intensively managed grassland in Braunschweig, northern Germany. Three different phases of vegetation were covered during the measuring campaign: tall grass canopy before cut (29 May 2000, short grass after cut, and re-growing vegetation after fertilization (5 June 2000. Results show that beside weather conditions, the agricultural activities significantly influenced the O₃ fluxes. After the cut the daytime average of the deposition velocity (v_d decreased from 0.44 cm s⁻¹ to 0.26 cm s⁻¹ and increased again to 0.32 cm s⁻¹ during the third period. Detailed model calculations were carried out to estimate deposition velocity and ozone flux. The model captures the general diurnal patter of deposition, with v_d daytime values of 0.52, 0.24, and 0.35 cm s⁻¹ in the first, second and third period, respectively. Thus the model predicts a stronger response to the cut than the measurements, which is nevertheless smaller than expected on the basis of change in leaf area. The results show that both cut and fertilization have complex impacts on fluxes. Reduction of vegetation by cutting decreased the stomatal flux initially greatly, but the stomatal flux recovered to 80% of its original value within a week. At the same time, the non-stomatal flux appears to have increased directly after the cut, which the model partially explains by an increase in the deposition to the soil. A missing sink after the cut may be the chemical interaction with biogenic volatile organic compounds released after the cut and exposed senescent plant parts, or the increase in soil NO emissions after fertilization. Increased canopy temperatures may also have promoted ozone destruction on leaf surfaces. These results demonstrate the importance of canopy

Steep cut slope composting : field trials and evaluation.

Science.gov (United States)

2011-04-01

Three different depths of compost and five compost retention techniques were tested to determine : their efficacy and cost effectiveness for increasing the establishment of native grass seedings and decreasing : erosion on steep roadside cut slopes i...

Ensiling as pretreatment of grass for lignocellulosic biomass conversion

DEFF Research Database (Denmark)

Ambye-Jensen, Morten

for subsequent enzymatic saccharification of cellulose and hemicellulose, by using the temperate grass Festulolium Hykor. The method was additionally combined with hydrothermal treatment, in order to decrease the required severity of an industrial applied pretreatment method. The first part of the project...... conditions providing the best possible pretreatment effect. The parameters were biomass composition, varied by ensiling of four seasonal cuts of grass, different dry matter (DM) content at ensiling, and an addition of different lactic acid bacteria species. First of all, the study confirmed that ensiling can...... act as a method of pretreatment and improve the enzymatic cellulose convertibility of grass. Furthermore, low DM ensiling was found to improve the effects of pretreatment due to a higher production of organic acids in the silage. The effect of applied lactic acid bacteria species was, however...

Effect of legume–grass silages and α-tocopherol supplementation on fatty acid composition and α-tocopherol, β-carotene and retinol concentrations in organically produced bovine milk

DEFF Research Database (Denmark)

Höjer, A; Adler, S; Martinsson, K

2012-01-01

- or three-cut red clover–grass silages (R2 and R3, respectively) or two-cut birdsfoot trefoil–grass silage (B2). In Exp. 2, 16 Norwegian Red dairy cows were fed short-term ley silage with red clover (S3) or long-term ley silage with white clover (L3) in combination with the supplementation of RRR...

Breeding for Grass Seed Yield

DEFF Research Database (Denmark)

Boelt, Birte; Studer, Bruno

2010-01-01

Seed yield is a trait of major interest for many fodder and amenity grass species and has received increasing attention since seed multiplication is economically relevant for novel grass cultivars to compete in the commercial market. Although seed yield is a complex trait and affected...... by agricultural practices as well as environmental factors, traits related to seed production reveal considerable genetic variation, prerequisite for improvement by direct or indirect selection. This chapter first reports on the biological and physiological basics of the grass reproduction system, then highlights...... important aspects and components affecting the seed yield potential and the agronomic and environmental aspects affecting the utilization and realization of the seed yield potential. Finally, it discusses the potential of plant breeding to sustainably improve total seed yield in fodder and amenity grasses....

Milk Production of Lactating Cows Fed Pangola Silage Ensiled with Irradiated Silage Innoculant and Fresh Cut Pangola Grass

International Nuclear Information System (INIS)

Prasanpanich, Somkiert; Buaphan, Sirirat; Boon-ek, Lertchatand; Piadang, Nattayana

2006-09-01

Ten crossbred Holstein lactating cows of mid-lactation and similar body score condition were balanced across the 2 treatments containing Group 1: 5 cows given fresh cut Pangola grass and Group 2: 5 cows fed Pangola silage ensiled with silage innoculant, under Group Comparison Design. They were also provided with an exact amount of 1 kg meal concentrate to 1 kg of milk produced. Mineral supplement and water were supplied free choice. The results did show that the cows in Group 1 had significantly higher (P<0.05) roughage and total dry matter intake than did the cows in Group 2. However, milk production in Group 2 appeared to have a non-significant higher amount, the concentrations of Blood urea nitrogen, Blood glucose and Triiodothyronine were not significant different between groups. The body weight change increased in both groups. It can concluded that cows fed Pangola silage ensiled with silage innoculant seemed to have higher Digestibility Co-efficiency due to the high efficiency of silage innoculant fermentation. Then, silage quality would be improved by mean of silage innoculant application.

Enhancing GRASS data communication with videographic technology

Energy Technology Data Exchange (ETDEWEB)

Sullivan, R.G. [Argonne National Lab., IL (United States); Gerdes, D.; Youngs, D. [Army Construction Engineering Research Lab., Champaign, IL (United States)

1992-07-01

Research at Argonne National Laboratory and the US Army Construction Engineering Research Laboratory has shown that computer videographic technology can be used to assist visualization and communication of GIS-generated geographic information. Videographic tools can be used to make results of GRASS analyses clear to decision-makers and to public interest groups, as well as to help GRASS users visualize geographic data more easily. Useful videographic visualization tools include graphic overlay of GRASS layers onto panchromatic images, allowing landscape features to be associated with GIS classifications; draping of GIS layers onto terrain models to create shaded relief maps; and incorporation of photographic imagery into GIS graphics. Useful videographic communications capabilities include convenient, direct interface to video formats, allowing incorporation of live video into GRASS graphics and output of GRASS graphics to video; convenient output of high-quality slides and prints; and enhanced labeling and editing of GRASS images. Conversion of GRASS imagery to standard videographic file formats also facilitates incorporation of GRASS images into other software programs, such as database and work-processing packages.

Enhancing GRASS data communication with videographic technology

Energy Technology Data Exchange (ETDEWEB)

Sullivan, R.G. (Argonne National Lab., IL (United States)); Gerdes, D.; Youngs, D. (Army Construction Engineering Research Lab., Champaign, IL (United States))

1992-01-01

Research at Argonne National Laboratory and the US Army Construction Engineering Research Laboratory has shown that computer videographic technology can be used to assist visualization and communication of GIS-generated geographic information. Videographic tools can be used to make results of GRASS analyses clear to decision-makers and to public interest groups, as well as to help GRASS users visualize geographic data more easily. Useful videographic visualization tools include graphic overlay of GRASS layers onto panchromatic images, allowing landscape features to be associated with GIS classifications; draping of GIS layers onto terrain models to create shaded relief maps; and incorporation of photographic imagery into GIS graphics. Useful videographic communications capabilities include convenient, direct interface to video formats, allowing incorporation of live video into GRASS graphics and output of GRASS graphics to video; convenient output of high-quality slides and prints; and enhanced labeling and editing of GRASS images. Conversion of GRASS imagery to standard videographic file formats also facilitates incorporation of GRASS images into other software programs, such as database and work-processing packages.

Effect of substituting fresh-cut perennial ryegrass with fresh-cut white clover on bovine milk fatty acid profile.

Science.gov (United States)

Stergiadis, Sokratis; Hynes, Deborah N; Thomson, Anna L; Kliem, Kirsty E; Berlitz, Carolina Gb; Günal, Mevlüt; Yan, Tianhai

2018-03-06

Including forage legumes in dairy systems can help address increasing environmental/economic concerns about perennial ryegrass monoculture pastures. This work investigated the effect of substituting fresh-cut grass with increasing quantities of fresh-cut white clover (WC) on milk fatty acid (FA) profile and transfer efficiency of dietary linoleic (LA) and α-linolenic (ALNA) acids to milk fat. Three groups of three crossbred dairy cows were used in a 3 × 3 crossover design. Dietary treatments were 0 g kg -1 WC + 600 g kg -1 grass, 200 g kg -1 WC + 400 g kg -1 grass, and 400 g kg -1 WC + 200 g kg -1 grass. All treatments were supplemented with 400 g kg -1 concentrates on a dry matter basis. Cows had a 19-day adaptation period to the experimental diet before a 6-day measurement period in individual tie stalls. Increasing dietary WC did not affect dry matter intake, milk yield or milk concentrations of fat, protein or lactose. Milk polyunsaturated FA concentrations (total n-3, total n-6, LA and ALNA) and transfer efficiency of LA and ALNA were increased with increasing dietary WC supply. Inclusion of WC in pastures may increase concentrations of nutritionally beneficial FA, without influencing milk yield and basic composition, but any implications on human health cannot be drawn. © 2018 The Authors. Journal of the Science of Food and Agriculture published by JohnWiley & Sons Ltd on behalf of Society of Chemical Industry. © 2018 The Authors. Journal of the Science of Food and Agriculture published by JohnWiley & Sons Ltd on behalf of Society of Chemical Industry.

Nutritive value of the elephant-grass obtained on different cut ages Valor nutritivo do capim-elefante obtido em diferentes idades de corte

Directory of Open Access Journals (Sweden)

Joanis Tilemahos Zervoudakis

2008-09-01

Full Text Available The present work aimed to determine the chemical composition, the parameters of the dry matter (DM and neutral detergent fiber (NDF in situ degrability, the MS (IVDMD in vitro dry matter digestibility and the content of total digestible nutrients (NDT of grass-elephant obtained in different cut ages, in rainy season. The grass-elephant was submitted to the cut at the ages of 30, 45, 60, 75, 90 and 105 days, from December to March. The samples were analyzed for dry matter (MS, crude protein (PB, ash, ether extract (EE, total carbohydrates (CT, neutral detergent fiber (NDF and acid (FDA, indigestible NDF (INDF and insoluble protein in acid detergent (ADIP. Additionally, the samples were weighted in bags of nylon, incubated in the rumen of three bovine canulated, and the residues were analyzed for DM and NDF residual. Subsequently, it were submitted to in vitro incubation with liquid ruminal and solution of acid pepsin for dry matter in vitro digestibility (IVDMDdetermination, of which values were utilized for content of total digestible nutrients (NDT estimation. The content of CP was reduced in a linear way by the advancement of the cut age, while the contents of NDF, ADF, INDF and ADIP increased. The fraction “a” of the DM was reduced and the NDF I fraction was increased with the cut age advancement. The IVDMD and TDN presented quadratic behaviors (P<0,05, in function of cut age , with maximum values of 69.00% and 57.21%, to the ages of 19.64 and 48.98 days, respectively.Objetivou-se determinar a composição químico-bromatológica, os parâmetros da degradabilidade in situ da matéria seca (MS e fibra em detergente neutro (FDN, a digestibilidade in vitro da MS (DIVMS e o teor de nutrientes digestíveis totais (NDT do capim-elefante obtido em diferentes idades de corte, na época das águas. A forrageira foi submetida ao corte nas idades de 30, 45, 60, 75, 90 e 105 dias, de dezembro a março. As amostras foram analisadas para matéria seca

Effects of cutting frequency and fertilizer-N application on growth ...

African Journals Online (AJOL)

N rates on growth and production of guinea grass (Panicum maximum Jacq). The experiment was conducted in Nsukka, Nigeria. Treatments comprised four levels of fertilizer N (0, 150, 300 and 450 kg N ha- 1) and four cutting intervals (3, 6, ...

How much gas can we get from grass?

International Nuclear Information System (INIS)

Nizami, A.S.; Orozco, A.; Groom, E.; Dieterich, B.; Murphy, J.D.

2012-01-01

Highlights: ► We highlight the various results for biomethane potential that may be obtained from the same grass silage. ► The results indicated that methane potential varied from 350 to 493 L CH 4 kg −1 VS added for three different BMP procedures. ► We compare two distinct digestion systems using the same grass. ► A two stage wet system achieved 451 L CH 4 kg −1 VS added over a 50 day retention period. ► A two phase system achieved 341 L CH 4 kg −1 VS added at a 30 day retention time. -- Abstract: Grass biomethane has been shown to be a sustainable gaseous transport biofuel, with a good energy balance, and significant potential for economic viability. Of issue for the designer is the variation in characteristics of the grass depending on location of source, time of cut and species. Further confusion arises from the biomethane potential tests (BMP) which have a tendency to give varying results. This paper has dual ambitions. One of these is to highlight the various results for biomethane potential that may be obtained from the same grass silage. The results indicated that methane potential from the same grass silage varied from 350 to 493 L CH 4 kg −1 VS added for three different BMP procedures. The second ambition is to attempt to compare two distinct digestion systems again using the same grass: a two stage continuously stirred tank reactor (CSTR); and a sequentially fed leach bed reactor connected to an upflow anaerobic sludge blanket (SLBR–UASB). The two engineered systems were designed, fabricated, commissioned and operated at small pilot scale until stable optimal operating conditions were reached. The CSTR system achieved 451 L CH 4 kg −1 VS added over a 50 day retention period. The SLBR–UASB achieved 341 L CH 4 kg −1 VS added at a 30 day retention time.

Ensiling as biological pretreatment of grass (Festulolium Hykor): The effect of composition, dry matter, and inocula on cellulose convertibility

DEFF Research Database (Denmark)

Ambye-Jensen, Morten; Johansen, Katja Salomon; Didion, Thomas

2013-01-01

Grass biomass is a prospective type of lignocellulosic biomass for bioenergy and fuel production, but the low dry matter in grass at harvest calls for new pretreatment strategies for cellulosic conversion. In this study, ensiling was tested as a biological pretreatment method of the high yielding...... grass variety Festulolium Hykor. The biomass was harvested in four cuts over a growing season. Three important factors of ensiling: biomass composition, dry matter (DM) at ensiling, and inoculation of lactic acid bacteria, were assessed in relation to subsequent enzymatic cellulose hydrolysis....... The organic acid profile after ensiling was dependant on the composition of the grass and the DM, rather than on the inocula. High levels of organic acids, notably lactic acid, produced during ensiling improved enzymatic cellulose convertibility in the grass biomass. Ensiling of less mature grass gave higher...

Effect of the addition of zero valent iron (Fe0) on the batch biological sulphate reduction using grass cellulose as carbon source

CSIR Research Space (South Africa)

Mulopo, J

2013-09-01

Full Text Available of grass cuttings and iron filings. Reactors A and B received twice as much grass (100 g) as C (50 g). Reactor A received no iron filings to act as a control, while reactors B and C received 50-g iron filings for the experimental duration. The results...

Biomechanical factors associated with time to complete a change of direction cutting maneuver.

Science.gov (United States)

Marshall, Brendan M; Franklyn-Miller, Andrew D; King, Enda A; Moran, Kieran A; Strike, Siobhán C; Falvey, Éanna C

2014-10-01

Cutting ability is an important aspect of many team sports, however, the biomechanical determinants of cutting performance are not well understood. This study aimed to address this issue by identifying the kinetic and kinematic factors correlated with the time to complete a cutting maneuver. In addition, an analysis of the test-retest reliability of all biomechanical measures was performed. Fifteen (n = 15) elite multidirectional sports players (Gaelic hurling) were recruited, and a 3-dimensional motion capture analysis of a 75° cut was undertaken. The factors associated with cutting time were determined using bivariate Pearson's correlations. Intraclass correlation coefficients (ICCs) were used to examine the test-retest reliability of biomechanical measures. Five biomechanical factors were associated with cutting time (2.28 ± 0.11 seconds): peak ankle power (r = 0.77), peak ankle plantar flexor moment (r = 0.65), range of pelvis lateral tilt (r = -0.54), maximum thorax lateral rotation angle (r = 0.51), and total ground contact time (r = -0.48). Intraclass correlation coefficient scores for these 5 factors, and indeed for the majority of the other biomechanical measures, ranged from good to excellent (ICC >0.60). Explosive force production about the ankle, pelvic control during single-limb support, and torso rotation toward the desired direction of travel were all key factors associated with cutting time. These findings should assist in the development of more effective training programs aimed at improving similar cutting performances. In addition, test-retest reliability scores were generally strong, therefore, motion capture techniques seem well placed to further investigate the determinants of cutting ability.

Effects of grass-clover management and cover crops on nitrogen cycling and nitrous oxide emissions in a stockless organic crop rotation

DEFF Research Database (Denmark)

Brozyna, Michal Adam; Petersen, Søren O; Chirinda, Ngoni

2013-01-01

Nitrogen (N) supply in stockless organic farming may be improved through use of grass-clover for anaerobic digestion, producing biogas and digested manure for use as fertilizer in the crop rotation. We studied the effects of grass-clover management on N cycling, nitrous oxide (N2O) emissions...... in the rotation (spring barley, potato and winter wheat); actual digestion of grass-clover cuttings was not possible, instead digested pig manure was used as substitute for digested grass-clover. Nitrous oxide fluxes were monitored between April 2008 and May 2009. In general, application of digested manure had...

Cutting method for structural component into block like shape, and device used for cutting

International Nuclear Information System (INIS)

Nakazawa, Koichi; Ito, Akira; Tateiwa, Masaaki.

1995-01-01

Two grooves each of a predetermined depth are formed along a surface of a structural component, and a portion between the two grooves is cut in the direction of the depth from the surface of the structural component by using a cutting wire of a wire saw device. Then, the cutting wire is moved in the extending direction of the grooves while optionally changing the position in the direction of the depth to conduct cutting for the back face. Further, the cutting wire is moved in the direction of the depth of the groove toward the surface, to cut a portion between the two grooves. The wire saw device comprises a wire saw main body movable along the surface of the structural component, a pair of wire guide portions extending in the direction of the depth, guide pooleys capable of guiding the cutting wire guides revolvably and rotatably disposed at the top end, and an endless annular cutting wire extending between the wire guide portions. Thus, it is possible to continuously cut out blocks set to optional size and thickness. In addition, remote cutting is possible with no requirement for an operator to access to the vicinity of radioactivated portions. (N.H.)

resistance of napier grass clones to napier grass stunt disease

African Journals Online (AJOL)

ACSS

Napier grass (Pennisetum purpureum Schumach) is the major livestock fodder under intensive and semi-intensive systems in East Africa. However, the productivity of the grass is constrained by Napier grass Stunt Disease. (NSD). The purpose of this study was to identify Napier grass clones with resistance to NSD.

Resistance of Napier grass clones to Napier grass Stunt Disease ...

African Journals Online (AJOL)

Napier grass (Pennisetum purpureum Schumach) is the major livestock fodder under intensive and semi-intensive systems in East Africa. However, the productivity of the grass is constrained by Napier grass Stunt Disease (NSD). The purpose of this study was to identify Napier grass clones with resistance to NSD.

Reversing land degradation through grasses: a systematic meta-analysis in the Indian tropics

Science.gov (United States)

Mandal, Debashis; Srivastava, Pankaj; Giri, Nishita; Kaushal, Rajesh; Cerda, Artemi; Meherul Alam, Nurnabi

2017-02-01

Although intensive agriculture is necessary to sustain the world's growing population, accelerated soil erosion contributes to a decrease in the environmental health of ecosystems at local, regional and global scales. Reversing the process of land degradation using vegetative measures is of utmost importance in such ecosystems. The present study critically analyzes the effect of grasses in reversing the process of land degradation using a systematic review. The collected information was segregated under three different land use and land management situations. Meta-analysis was applied to test the hypothesis that the use of grasses reduces runoff and soil erosion. The effect of grasses was deduced for grass strip and in combination with physical structures. Similarly, the effects of grasses were analyzed in degraded pasture lands. The overall result of the meta-analysis showed that infiltration capacity increased approximately 2-fold after planting grasses across the slopes in agricultural fields. Grazing land management through a cut-and-carry system increased conservation efficiencies by 42 and 63 % with respect to reduction in runoff and erosion, respectively. Considering the comprehensive performance index (CPI), it has been observed that hybrid Napier (Pennisetum purpureum) and sambuta (Saccharum munja) grass seem to posses the most desirable attributes as an effective grass barrier for the western Himalayas and Eastern Ghats, while natural grass (Dichanthium annulatum) and broom grass (Thysanolaena maxima) are found to be most promising grass species for the Konkan region of the Western Ghats and the northeastern Himalayan region, respectively. In addition to these benefits, it was also observed that soil carbon loss can be reduced by 83 % with the use of grasses. Overall, efficacy for erosion control of various grasses was more than 60 %; hence, their selection should be based on the production potential of these grasses under given edaphic and agro

Composição química do capim-elefante cv. Roxo cortado em diferentes alturas Chemical composition of elephant grass var. Roxo cut at different heights

Directory of Open Access Journals (Sweden)

Estácio Alves dos Santos

2001-02-01

Full Text Available O objetivo deste trabalho foi verificar o efeito dos cortes efetuados a 0, 15, 30 e 45 cm sobre a composição química do capim-elefante (Pennisetum purpureum, Schum. cv. Roxo, em épocas seca e chuvosa. As amostras foram obtidas de uma área útil de 8,4 m² de cada parcela. Após o corte de uniformização, efetuaram-se dois cortes no período seco, em intervalos de 90 dias, e três no período chuvoso, em intervalos de 60 dias. De cada parcela foi tomada uma amostra de 3 a 5 perfilhos, desidratada em estufa e triturada para analises laboratoriais. Foram avaliados os percentuais de matéria seca (MS, proteína bruta (PB, fibra em detergente neutro (FDN, fibra em detergente ácido (FDA, celulose (CEL, hemicelulose (HCEL, lignina (LIG e cinzas. As alturas de corte não influenciaram a composição química da forrageira, nem houve interação com as épocas. Com exceção de hemicelulose e cinzas, os cortes na época seca mostraram resultados superiores à chuvosa. As médias nas duas épocas foram 19,70 e 17,44% para MS; 7,74 e 7,25% para PB; 76,41 e 71,13% para FDN; 42,75 e 41,02% para FDA; 31,44 e 30,43% para CEL; 30,66 e 30,28% para HCEL; 9,25 e 7,83% para LIG; e 1,97 e 3,38% para cinzas, nos períodos seco e chuvoso, respectivamente.This work was carried out to evaluate the cutting effect at 0, 15, 30 and 45 cm height, on the chemical composition of elephant grass (Pennisetum purpureum, Schum. cv. Roxo in dry and rainy seasons. The samples were obtained from an useful area of 8,4 m² from each parcel. After the uniformity cut two cuts in dry season with 90 days interval, and three cuts in rainy seasons with 60 days interval. A sample of 3 or 5 tillers was taken from each parcel and they were dehydrated in air forced stove and ground for laboratorial analysis. The percentages of dry matter (DM, crude protein (CP, neutral detergent fiber (NDF, acid detergent fiber (ADF, cellulose (CEL, hemicellulose (HCEL, lignin (LIG, and ashes were

Cutting assembly

Science.gov (United States)

Racki, Daniel J.; Swenson, Clark E.; Bencloski, William A.; Wineman, Arthur L.

1984-01-01

A cutting apparatus includes a support table mounted for movement toward and away from a workpiece and carrying a mirror which directs a cutting laser beam onto the workpiece. A carrier is rotatably and pivotally mounted on the support table between the mirror and workpiece and supports a conduit discharging gas toward the point of impingement of the laser beam on the workpiece. Means are provided for rotating the carrier relative to the support table to place the gas discharging conduit in the proper positions for cuts made in different directions on the workpiece.

Intercropping of reed canary grass, phalaris arundinacea l., with legumes can cut costs for n-fertilization

Energy Technology Data Exchange (ETDEWEB)

Palmborg, Cecilia; Lindvall, Eva (Swedish Univ. of Agricultural Sciences, Dept. of Agricultural Research for Northern Sweden, Umeaa (Sweden)), e-mail: eva.lindvall@njv.slu.se

2010-07-15

In a field experiment close to Oestersund in mid Sweden reed canary grass was intercropped with barley, Alsike clover, Trifolium hybridum L., red clover, T. pratense L., goats rue, Galega orientalis L. or a combination of red clover and goats rue. There were also three fertilization treatments: A: Recommended amounts of N, P and K. B: Recommended amounts of P and K and half amount of N. C: Sewage sludge application before sowing (establishment year) and recommended amounts of P and K and half amount of N. The biomass was lower where reed canary grass had been undersown in barley, and higher with full N-fertilization than with half N-fertilization. However there were no significant differences between legume intercrops with half N-fertilization and pure reed canary grass with full Nfertilization. Alsike clover was the most productive legume, followed by red clover. The amount of nitrogen fixed by the legumes was less with full N-fertilization (29 kg/ha as a mean) than with half N-fertilization (38 kg/ha). Intercropping with legumes could substitute half of the N in fertilization but similar experiments in other parts of Sweden has shown that there is a higher risk of weed problems

Effect of application timing and grass height on the nitrogen fertilizer replacement value of cattle slurry applied with a trailing-shoe application system

NARCIS (Netherlands)

Lalor, S.T.J.; Schroder, J.J.; Lantinga, E.A.; Schulte, R.P.O.

2014-01-01

This study investigated the effect of using a trailing-shoe system to apply cattle slurry, under different conditions of grass height (low [LG]: freshly cut sward [4–5 cm height] vs. high [HG]: application delayed by 7–19 d and applied to taller grass sward [4–11 cm] height) and month of application

Chemical composition of elephant grass silages supplemented with different levels of dehydrated cashew bagasse

Directory of Open Access Journals (Sweden)

Danillo Glaydson Farias Guerra

2016-04-01

Full Text Available The objective of the present study was to evaluate the chemical composition of elephant grass silages supplemented with different levels dried cashew bagasse (DCB. Our experiment used a randomized design replicated four times, each replicate consisting of the following five treatments: 100% elephant grass; 95% elephant grass + 5% DCB; 90% elephant grass + 10% DCB; 85% elephant grass + 15% DCB; and 80% elephant grass + 20% DCB. The elephant grass was cut manually to a residual height of 5 cm at 80 days of age, and cashew bagasse was obtained from the processing of cashew stalks used in fruit pulp manufacturing in Mossoró/RN. Plastic buckets were used as experimental silos, and 90 days after ensiling the experimental silos were opened and the contents analyzed. The addition of dried cashew bagasse to silage linearly increased the levels of dried matter and crude protein by 0.59% and 0.13%, respectively, for each 1% addition (P < 0.05. The neutral detergent fiber and acid detergent content of the silages was reduced by 0.22% and 0.09%, respectively, for each 1% addition of the bagasse. The total carbohydrate content was not influenced by the bagasse addition (P > 0.05, and averaged 82.29%. The levels of non-fiber carbohydrate showed linear growth (P < 0.05 as the dehydrated cashew bagasse was added, and pH and ammoniacal nitrogen levels were reduced. The addition of the dehydrated bagasse to elephant grass silage improves its chemical composition, and it can be effectively added up to the level of 20%.

Dynamic modeling of the cesium, strontium, and ruthenium transfer to grass and vegetables

International Nuclear Information System (INIS)

Renaud, P.; Real, J.; Maubert, H.; Roussel-Debet, S.

1999-01-01

From 1988 to 1993, the Nuclear Safety and Protection Institute (Institut de Protection et de Surete Nucleaire -- IPSN) conducted experimental programs focused on transfers to vegetation following accidental localized deposits of radioactive aerosols. In relation to vegetable crops (fruit, leaves, and root vegetables) and meadow grass these experiments have enabled a determination of the factors involved in the transfer of cesium, strontium, and ruthenium at successive harvests, or cuttings, in respect of various time lags after contamination. The dynamic modeling given by these results allows an evaluation of changes in the mass activity of vegetables and grass during the months following deposit. It constitutes part of the ASTRAL post-accident radioecology model

Effect of sulfur levels on four tropical grasses in cerrado soils of mato grosso do sul, Brazil

Energy Technology Data Exchange (ETDEWEB)

Carlos Casagrande, J.; Correa De Souza, O.

1982-01-01

A greenhouse experiment was conducted to evaluate responses of four tropical grasses, Melinis minutiflora cv. Cabelo de Negro Hyparrhenia rufa, Brachiaria decumbens australian type and Setaria anceps cv. kazungula to five levels of sulfur (0, 15, 30, 45 and 60 kg/ha) in two cerrado Oxisols and one Entisol. Cuttings were done at 50, 95 and 150 days after plant exposure. Besides dry matter production, visible symptoms of sulfur deficiency were observed. Greater responses were associated with sulfur rates up to 30 kg/ha. Molasses grass and brachiaria were the most responsive species.

Radiation and temperature influence on forage grasses yield

International Nuclear Information System (INIS)

Vadell, J.; Medrano, H.

1986-01-01

Biomass production has been studied in forage plants, as well as the temperature and radiation effects on plant growth. Four cultivars of grasses: Lolium multiflorum var westerwoldicum cv Promenade, Lolium perenne cvs Combi and Compas and Bromus inermis were growing as microswards in a growth chamber with constant temperature and outdoors. A field assay was done also with the same cultivars. L. multiflorum was the highest productive genotype anywhere showing also more active growth at low temperatures. Total production showed significant differences among genotypes. It was also a clear correspondence among microswards and field productions. Highest efficiency values (in % of PAR accumulated as dry matter) was obtained in 6th cut (April) achieving to 5.18 % in L. multiflorum. Biomass production variations through the growth period show a low correlation with <> and very high correlation with total irradiation received by the sward between consecutive cuts [es

Influence of a Vertical Cutting Device on Brassica Napus Seed Loss in Direct Combining

Energy Technology Data Exchange (ETDEWEB)

Pari, L.; Fedrizzi, M.; Assirelli, A. (Consiglio per la Ricerca e la Sperimentazione in Agricoltura, Unita di Ricerca per l' Ingegneria Agraria, Monterotondo, RM (Italy))

2008-10-15

EU requires that by 2010 5.65% of diesel fuel must be of vegetable origin. To reduce Italian dependence from imported palm oil, it is necessary to increase national production of vegetable oils: together with sunflower and soybean, canola (Brassica napus or Brassica napus oleifera) is an interesting possibility to satisfy vegetable oil demand, that is rapidly increasing for its use in biodiesel production. In Italy potential areas are available for the cultivation in relation to adequate rainfall and mild winters, that are very promising factors for canola production. However, the long period of seed maturity, non uniform growth, natural dehiscent process and variable weather conditions, such as wind and rain, are some of the factors which can lead to large seed losses: this is the main problem limiting this specie diffusion. Amongst available harvesting techniques, direct harvest of canola is an hazardous practice because there are several important questions related to it. The success of canola may depend on research initiatives to reduce some of the obstacles associated with its growing. The objective of this study is to determine if different cropping heads in direct combining can reduce seed losses. In Northern Italy (Piedmont) the trials were conducted in a 16 ha canola cultivation, in which was seeded the -Lion variety of canola. In order to realize direct harvest, the combine cylinder speed was regulated as slow as possible (500 rpm), the concave was opened at 3/4 of the way (about 25 mm clearance) and the fan speed was set at 2/3 of small grain settings (800 rpm). Only one combine was used for the trials, a New Holland CX 9080, in order to avoid any influence on seed losses. The combine was equipped with two different cutting heads: a common wheat type (type 1) and another, similar to the first, but equipped with vertical cutting devices on both ends of the head (type 2), because the plants are very dense and entangled. The losses of seeds were measured

Seasonal variation in diurnal atmospheric grass pollen concentration profiles

DEFF Research Database (Denmark)

Peel, Robert George; Ørby, Pia Viuf; Skjøth, Carsten Ambelas

2014-01-01

the time of day when peak concentrations are most likely to occur using seasonally averaged diurnal profiles. Atmospheric pollen loads are highly dependent upon emissions, and different species of grass are known to flower and emit pollen at different times of the day and during different periods......In this study, the diurnal atmospheric grass pollen concentration profile within the Danish city of Aarhus was shown to change in a systematic manner as the pollen season progressed. Although diurnal grass pollen profiles can differ greatly from day-to-day, it is common practice to establish...... of the pollen season. Pollen concentrations are also influenced by meteorological factors - directly through those parameters that govern pollen dispersion and transport, and indirectly through the weather-driven flowering process. We found that three different profiles dominated the grass pollen season...

Nutrients uptakes and losses during grass stand formation on deforested areas under impact of acid depositions

Czech Academy of Sciences Publication Activity Database

Holub, Petr; Tůma, Ivan; Fiala, Karel; Jandák, J.

2004-01-01

Roč. 17, - (2004), s. 53-60. ISBN 80-7157-297-7 R&D Projects: GA AV ČR KSK6005114; GA ČR GA526/97/0170 Institutional research plan: CEZ:AV0Z6005908 Keywords : clear-cut grasses * lysimetric water * soil amelioration Subject RIV: EF - Botanics

Lagere fosfaatuitscheiding op melkveebedrijven door zwaardere maaisneden = Decreasing phosphorus excretion on dairy farms by cutting at a later stage

NARCIS (Netherlands)

Curth-van Middelkoop, J.C.; Holshof, G.; Plomp, M.

2014-01-01

By cutting grass for silage at a later stage than usual it is possible to decrease the phosphorus excretion on dairy farms maximal about 5%. This saves costs for mowing but it increases the use of manufactured feed and grazing is harder to realise because it takes more time for a cut for silage to

Gene Expression Profiling of Grass Carp (Ctenopharyngodon idellus and Crisp Grass Carp

Directory of Open Access Journals (Sweden)

Ermeng Yu

2014-01-01

Full Text Available Grass carp (Ctenopharyngodon idellus is one of the most important freshwater fish that is native to China, and crisp grass carp is a kind of high value-added fishes which have higher muscle firmness. To investigate biological functions and possible signal transduction pathways that address muscle firmness increase of crisp grass carp, microarray analysis of 14,900 transcripts was performed. Compared with grass carp, 127 genes were upregulated and 114 genes were downregulated in crisp grass carp. Gene ontology (GO analysis revealed 30 GOs of differentially expressed genes in crisp grass carp. And strong correlation with muscle firmness increase of crisp grass carp was found for these genes from differentiation of muscle fibers and deposition of ECM, and also glycolysis/gluconeogenesis pathway and calcium metabolism may contribute to muscle firmness increase. In addition, a number of genes with unknown functions may be related to muscle firmness, and these genes are still further explored. Overall, these results had been demonstrated to play important roles in clarifying the molecular mechanism of muscle firmness increase in crisp grass carp.

Status of exotic grasses and grass-like vegetation and potential impacts on wildlife in New England

Science.gov (United States)

DeStefano, Stephen

2013-01-01

The Northeastern section of the United States, known as New England, has seen vast changes in land cover and human population over the past 3 centuries. Much of the region is forested; grasslands and other open-land cover types are less common, but provide habitat for many species that are currently declining in abundance and distribution. New England also consists of some of the most densely populated and developed states in the country. The origin, distribution, and spread of exotic species are highly correlated with human development. As such, exotics are common throughout much of New England, including several species of graminoids (grasses and grass-like plants such as sedges and rushes). Several of the more invasive grass species can form expansive dense mats that exclude native plants, alter ecosystem structure and functions, and are perceived to provide little-to-no value as wildlife food or cover. Although little research has been conducted on direct impacts of exotic graminoids on wildlife populations in New England, several studies on the common reed (Phragmites australis) in salt marshes have shown this species to have variable effects as cover for birds and other wildlife, depending on the distribution of the plant (e.g., patches and borders of reeds are used more by wildlife than expansive densely growing stands). Direct impacts of other grasses on wildlife populations are largely unknown. However, many of the invasive graminoid species that are present in New England have the capability of outcompeting native plants and thereby potentially affecting associated fauna. Preservation, protection, and restoration of grassland and open-land cover types are complex but necessary challenges in the region to maintain biological and genetic diversity of grassland, wetland, and other open-land obligate species.

Treatment with grass allergen peptides improves symptoms of grass pollen-induced allergic rhinoconjunctivitis.

Science.gov (United States)

Ellis, Anne K; Frankish, Charles W; O'Hehir, Robyn E; Armstrong, Kristen; Steacy, Lisa; Larché, Mark; Hafner, Roderick P

2017-08-01

Synthetic peptide immunoregulatory epitopes are a new class of immunotherapy to treat allergic rhinoconjunctivitis (ARC). Grass allergen peptides, comprising 7 synthetic T-cell epitopes derived from Cyn d 1, Lol p 5, Dac g 5, Hol l 5, and Phl p 5, is investigated for treatment of grass pollen-induced ARC. We sought to evaluate the efficacy, safety, and tolerability of intradermally administered grass allergen peptides. A multicenter, randomized, double-blind, placebo-controlled study evaluated 3 regimens of grass allergen peptides versus placebo in patients with grass pollen-induced allergy (18-65 years). After a 4-day baseline challenge to rye grass in the environmental exposure unit (EEU), subjects were randomized to receive grass allergen peptides at 6 nmol at 2-week intervals for a total of 8 doses (8x6Q2W), grass allergen peptides at 12 nmol at 4-week intervals for a total of 4 doses (4x12Q4W), or grass allergen peptides at 12 nmol at 2-week intervals for a total of 8 doses (8x12Q2W) or placebo and treated before the grass pollen season. The primary efficacy end point was change from baseline in total rhinoconjunctivitis symptom score across days 2 to 4 of a 4-day posttreatment challenge (PTC) in the EEU after the grass pollen season. Secondary efficacy end points and safety were also assessed. Two hundred eighty-two subjects were randomized. Significantly greater improvement (reduction of total rhinoconjunctivitis symptom score from baseline to PTC) occurred across days 2 to 4 with grass allergen peptide 8x6Q2W versus placebo (-5.4 vs -3.8, respectively; P = .0346). Greater improvement at PTC also occurred for grass allergen peptide 8x6Q2W versus placebo (P = .0403) in patients with more symptomatic ARC. No safety signals were detected. Grass allergen peptide 8x6Q2W significantly improved ARC symptoms after rye grass allergen challenge in an EEU with an acceptable safety profile. Copyright © 2017 American Academy of Allergy, Asthma & Immunology

Nitrate leaching in maize after cultivation of differently managed grass-clover leys on coarse sand in Denmark

DEFF Research Database (Denmark)

Hansen, Elly Møller; Eriksen, Jørgen

2016-01-01

When grass-clover leys have been ploughed nitrate leaching may increase. However, management of leys before or after ploughing may affect the leaching risk. We examined the effect of cultivating a six year ley, which the last two years had been treated differently (grazing only; spring cut follow...

Biomass yield and greenhouse gas emissions from a drained fen peatland cultivated with reed canary grass under different harvest and fertilizer regimes

DEFF Research Database (Denmark)

Kandel, Tanka Prasad; Elsgaard, Lars; Karki, Sandhya

2013-01-01

Reed canary grass (RCG, Phalaris arundinacea L.) is a suitable energy crop for cultivation in northern peatlands. However, the atmospheric impact of RCG cultivation as influenced by harvest frequency and fertilization is not clear. Here, we compared the biomass yield and greenhouse gas (GHG......) balance for RCG cultivation in peatlands affected by cutting frequency and fertilizer managements. The managements included one-cut (OC) and two-cut (TC) systems that were either fertilized (TC-F) or unfertilized (TC-U) after the first cut in summer. Biomass yield of OC, TC-F and TC-U were 12, 16 and 11...

Phytophagous insect fauna tracks host plant responses to exotic grass invasion.

Science.gov (United States)

Almeida-Neto, Mário; Prado, Paulo I; Lewinsohn, Thomas M

2011-04-01

The high dependence of herbivorous insects on their host plants implies that plant invaders can affect these insects directly, by not providing a suitable habitat, or indirectly, by altering host plant availability. In this study, we sampled Asteraceae flower heads in cerrado remnants with varying levels of exotic grass invasion to evaluate whether invasive grasses have a direct effect on herbivore richness independent of the current disturbance level and host plant richness. By classifying herbivores according to the degree of host plant specialization, we also investigated whether invasive grasses reduce the uniqueness of the herbivorous assemblages. Herbivorous insect richness showed a unimodal relationship with invasive grass cover that was significantly explained only by way of the variation in host plant richness. The same result was found for polyphagous and oligophagous insects, but monophages showed a significant negative response to the intensity of the grass invasion that was independent of host plant richness. Our findings lend support to the hypothesis that the aggregate effect of invasive plants on herbivores tends to mirror the effects of invasive plants on host plants. In addition, exotic plants affect specialist insects differently from generalist insects; thus exotic plants affect not only the size but also the structural profile of herbivorous insect assemblages.

Lime and phosphate application as mycorrhizae stimulation to enhance growth and yield of Marandu grass

Directory of Open Access Journals (Sweden)

Franklin Eduardo Melo Santiago

2017-08-01

Full Text Available Pastures are important food sources for Brazilian cattle herds. However, inadequate management of soil fertility has emerged as a major cause of low yield rates and of progressive degradation of these areas. The objective of the present study was to evaluate growth, by means of morphogenetic and structural characteristics, and yield of Brachiaria brizantha Stapf. cv. Marandu as functions of the application of the mycorrhizae stimulant formononetin, associated with lime and phosphate application. The experimental design was completely randomised with four replications, and the treatments were arranged in a 2 x 2 x 5 factorial scheme, consisting of two liming treatments (with and without limestone, two formononetin treatments (with and without application and five P2O5 doses (0, 25, 50, 100 and 200 mg dm-3. Three shoot cuttings were carried out after a first standardisation cutting to evaluate the morphogenetic and structural characteristics as well as the dry matter yield of different morphological fractions. Liming and phosphate application at the dose of 141 mg dm-3 P2O5 increased growth and yield of Marandu grass, and these practices are essential for the cultivation of this pasture grass in Yellow Latosol of the Cerrado region of Piauí, Brazil. The application of formononetin increased stem elongation rate, total number of tillers and green stem dry matter, and decreased dead dry matter of Marandu grass, which are effects that contribute to the improvement of pasture quality.

Establishment of native and exotic grasses on mine overburden and topsoil in the Hunter Valley, New South Wales

Energy Technology Data Exchange (ETDEWEB)

Huxtable, C.H.A.; Koen, T.B.; Waterhouse, D. [DNR, Dangar, NSW (Australia)

2005-07-01

Current recommendations for rehabilitation of open-cut coal mines in the Hunter Valley involve the sowing of exotic pasture species to reinstate mined land to Class IV and V under the Rural Land Capability System. Despite the importance of native grasses in the pre-mined landscape, they are currently not widely included in mine rehabilitation. To address this issue a project was conducted between 1994 and 2000 to research the use of native grasses for rehabilitation of open-cut coal mines in the Hunter Valley. This paper reports on 2 mine site experiments that aimed to assess establishment and persistence of a broad range of native and exotic grass species from an autumn sowing in both topsoil and raw spoil over a period of 61 months. The most promising natives in terms of early establishment, persistence and spread over time, included six C-3 accessions (five Austrodanthonia spp. and Austrostipa bigeniculata) and one C-4 accession (Cynodon dactylon). Persistence of these accessions was better in raw spoil than topsoil, despite initial low numbers, due to a lack of weed competition and their ability to spread by self-seeding. In topsoil, and in the absence of any biomass reduction, native species were mostly out-competed by vigorous exotic perennial grasses which were sown in these experiments and from seed influx from adjacent rehabilitation areas or from the soil seed bank. The effects of climatic conditions and differences in soil physical, chemical and seed bank characteristics at the 2 mine sites are also discussed.

Determination of the swelling velocity of different wood species and tissues depending on the cutting direction on microtome section level

Science.gov (United States)

Stuckenberg, Peter; Wenderdel, Christoph; Zauer, Mario

2018-06-01

Swelling velocity in dependence on the anatomical cutting direction of yew [Taxus baccata L.] and boxwood [Buxus sempervirens L.] was determined at temperature of 20 °C and at relative humidity of 10% and 100%. The investigations, conducted on a microtome section level, showed a similar behaviour for specimens of both wood species. It was possible to determine that the swelling velocity for yew and boxwood increases in its anatomical cutting directions. The longitudinal direction showed the lowest value, the tangential direction, by distinction, the highest value. Furthermore, a significant influence of early wood and late wood content on the swelling velocity for yew was detected.

Usability value and heavy metals accumulation in forage grasses grown on power station ash deposit

Directory of Open Access Journals (Sweden)

Simić Aleksandar S.

2015-01-01

Full Text Available The study of five forage grasses (Lolium multiflorum, Festuca rubra, Festuca arundinacea, Arrhenatherum elatius and Dactylis glomerata was conducted on an uncontaminated cultivated land, of leached chernozem type, and on “Nikola Tesla A” (TENT A thermal power station ash deposit. The concentrations of: As, Pb, Cd, Zn, Ni, Fe i Cu in grasses grown on two media were compared. Grass samples have been collected in tillering stage, when they were in full development. During the vegetative period three replications cut was conducted at about 3-5 cm height, imitating mowing and grazing. The concentrations of As and Ni were elevated in media samples collected from TENT A ash deposit, while the level of all studied elements in soil samples collected from cultivated land were within allowed limits. The variance of certain elements amounts in plant material collected from TENT A ash deposit was less homogeneous; the concentrations of As, Fe and Ni were higher in grasses collected from ash deposit, but Pb and Cu concentrations were higher in grasses grown on cultivated land. The concentrations of Zn were approximately the same in plants collected from the sites, whereas Cd concentrations were slightly increased in grasses grown on ash deposit. In general, it can be concluded from the results of this study that the concentrations of heavy metals in plants collected from both sites do not exceed maximal tolerant levels for fodder. The use of grasses grown on ash deposit for forage production should be taken with reserve. [Projekat Ministarstva nauke Republike Srbije, br. TR 31016: Unapređenje tehnologije gajenja krmnih biljaka na oranicama i travnjacima

The conditions for use of reed canary grass briquettes and chopped reed canary grass in small heating plants; Foerutsaettningar foer anvaendning av roerflensbriketter och hackad roerflen i mindre vaermecentraler

Energy Technology Data Exchange (ETDEWEB)

Paulrud, Susanne; Davidsson, Kent; Holmgren, Magnus A. (Swedish National Testing and Research Inst., Boraas (Sweden)); Hedman, Henry; Oehman, Rikard; Leffler, Joel (ETC, Piteaa (Sweden))

2010-09-15

The aim of this study was to test fuel blends of briquettes and chopped reed canary grass in three existing heating plants (50 kW - 500 kW) and elucidate the requirements for good performance and low emissions. In addition, the study investigated production of reed canary grass briquettes using a Polish screw press developed for straw. Some tests with a bale shredder were also undertaken. The screw press technique is of interest for reed canary grass because it is a simple technique, easy to handle, developed for small scale production, and for straw. The test with reed canary grass in this study showed that the technique worked well but that further adjustments and a longer test period are needed in order to achieve higher bulk density and mechanical strength. The test with chopped reed canary grass shows that a system with a forage harvester is slightly more effective than baling and cutting in a bale shredder. The study concluded that few existing heating plants of size 50 kW-1 MW that currently use wood fuels will be able to use reed canary grass without adjustment, conversion or replacement of the combustion equipment. Reed canary grass has 15-20 times higher ash content than wood briquettes and 2-3 times higher ash content than forest residue; the combustion equipment must be able to handle these properties. The boiler must be equipped with a continuously operating ashing system and it must be possible to move the ash bed mechanically. There is a risk of high content of unburned matter if the residence time in the boiler is too short, due to the structure and low bulk density of the reed canary grass ash. Using a blend of wood briquettes and reed canary briquettes results in lower ash content, but also affects the ash chemistry and tends to lower the initial ash fusion temperature compared to using 100 % reed canary grass. Blending chopped reed canary grass and wood chips in an existing small scale heating plant also requires measures to achieve an even fuel

Effect of sunn hemp (Crotalaria juncea L.) cutting date and planting density on weed suppression in Georgia, USA.

Science.gov (United States)

Morris, J Bradley; Chase, Carlene; Treadwell, Danielle; Koenig, Rosie; Cho, Alyssa; Morales-Payan, Jose Pable; Murphy, Tim; Antonious, George F

2015-01-01

A field study was conducted in 2008 and 2009 at the USDA, ARS, Plant Genetic Resources Conservation Unit in Griffin, GA, to investigate weed suppression by sunn hemp (Crotalaria juncea L). The objectives were to (1) evaluate the effects of apical meristem removal (AMR) at three dates [5, 6, and 7 wks after planting (WAP) on May 14, 2008 and May 21, 2009] and (2) assess the impact of seeding rates (11, 28, and 45 kg ha(-1)) on weed biomass reduction. Weed species were identified at 4, 8, and 12 wks after sunn hemp planting. Sunn hemp cutting date had no significant effect on weed suppression in 2008 but significant differences for grass weeds at 4, 8, and 12 WAP and for yellow nutsedge at 8 and 12 WAP did occur when compared to the control in 2009. In comparison to the sunn hemp-free control plot in 2009, all three seeding rates had reduced grass weed dry weights at 4, 8, and 12 WAP. The total mass of yellow nutsedge when grown with sunn hemp was reduced compared to the total mass of yellow nutsedge grown in the weedy check for all seeding rates at 8 and 12 WAP. Lower grass weed biomass was observed by 12 WAP for cutting dates and seeding rates during 2008 and 2009. Sunn hemp cutting date and seeding rate reduced branch numbers in both years. The reduction in sunn hemp seeding rates revealed a decrease in weed populations.

The Cutting Process, Chips and Cutting Forces in Machining CFRP

DEFF Research Database (Denmark)

Koplev, A.; Lystrup, Aage; Vorm, T.

1983-01-01

The cutting of unidirectional CFRP, perpendicular as well as parallel to the fibre orientation, is examined. Shaping experiments, ‘quick-stop’ experiments, and a new chip preparation technique are used for the investigation. The formation of the chips, and the quality of the machined surface...... is discussed. The cutting forces parallel and perpendicular to the cutting direction are measured for various parameters, and the results correlated to the formation of chips and the wear of the tool....

Evaluation of the elephant grass (Pennisetum purpureum Schum) aiming the coal fuel production; Avaliacao do capim-elefante (Pennisetum purpureum Schum) visando o carvoejamento

Energy Technology Data Exchange (ETDEWEB)

Andrade, Joao Batista de; Ferrari Junior, Evaldo; Beisman, Darcy Antonio; Werner, Joaquim Carlos; Ghisi, Odete Maria A.A.; Leite, Vanderley Benedito de Oliveira [Instituto de Zootecnica, Nova Odessa, SP (Brazil)

2000-07-01

It was conducted, in the research farms of the Instituto de Zootecnia, at Nova Odessa and Brotas, 2 experiments to evaluate dry matter yield of elephant grass, cv Guacu, upon 4 rates of nitrogen (50, 100, 200 or 400 kg N/ha/year) and 3 cut frequencies (2, 3 or 4 cuts/year). The experiments were set in randomized block design, with 4 replications. The treatments were arranged in a 4 x 3 factorial. The dry matter yield increased as nitrogen rates increased and cut frequency decreased. (author)

On Permuting Cut with Contraction

OpenAIRE

Borisavljevic, Mirjana; Dosen, Kosta; Petric, Zoran

1999-01-01

The paper presents a cut-elimination procedure for intuitionistic propositional logic in which cut is eliminated directly, without introducing the multiple-cut rule mix, and in which pushing cut above contraction is one of the reduction steps. The presentation of this procedure is preceded by an analysis of Gentzen's mix-elimination procedure, made in the perspective of permuting cut with contraction. It is also shown that in the absence of implication, pushing cut above contraction doesn't p...

The Effect of Muscle Fiber Direction on the Cut Surface Angle of Frozen Fish Muscular Tissue Cut by Bending Force

OpenAIRE

岡本, 清; 羽倉, 義雄; 鈴木, 寛一; 久保田, 清

1996-01-01

We have proposed a new cutting method named "Cryo-cutting" for frozen foodstuffs by applying a bending force instead of conventional cutting methods with band saw. This paper investigated the effect of muscle fiber angle (θf) to cut surface angle (θs) of frozen tuna muscular tissue at -70, -100 and -130°C for the purpose of evaluating the applicability of the cryo-cutting method to frozen fishes. The results were as follows : (1) There were two typical cutting patterns ("across the muscle fib...

Cutting method and cutting device for spent fuel rod of nuclear reactor

International Nuclear Information System (INIS)

Komatsu, Masahiko; Ose, Toshihiko.

1996-01-01

A control rod transferred under water in a vertically suspended state is postured horizontally at such a water depth that radiations can be shielded, and then it is cut to a dropping speed limiting portion and a cross-like main body. The separated cross-like main body portion is further cut in the longitudinal direction and separated into a pair of cut pieces each having an L-shaped cross section. A disk like metal saw is used as a cutting tool. Alternatively, a plasma jet cutter or a melting-type water jet cutter is used as a cutting tool. Then, since the spent control rod to be cut is postured horizontally under water, the water depth for the cutting position can be reduced. As a result, the cutting state using the cutting tool can be observed by naked eyes from the position above the water surface thereby enabling to perform the cutting operation reliably. (N.H.)

SQ grass sublingual allergy immunotherapy tablet for disease-modifying treatment of grass pollen allergic rhinoconjunctivitis

DEFF Research Database (Denmark)

Dahl, Ronald; Roberts, Graham; de Blic, Jacques

2016-01-01

BACKGROUND: Allergy immunotherapy is a treatment option for allergic rhinoconjunctivitis (ARC). It is unique compared with pharmacotherapy in that it modifies the immunologic pathways that elicit an allergic response. The SQ Timothy grass sublingual immunotherapy (SLIT) tablet is approved in North...... America and throughout Europe for the treatment of adults and children (≥5 years old) with grass pollen-induced ARC. OBJECTIVE: The clinical evidence for the use of SQ grass SLIT-tablet as a disease-modifying treatment for grass pollen ARC is discussed in this review. METHODS: The review included...... the suitability of SQ grass SLIT-tablet for patients with clinically relevant symptoms to multiple Pooideae grass species, single-season efficacy, safety, adherence, coseasonal initiation, and cost-effectiveness. The data from the long-term SQ grass SLIT-tablet clinical trial that evaluated a clinical effect 2...

Production and chemical composition of grasses and legumes cultivated in pure form, mixed or in consortium

Directory of Open Access Journals (Sweden)

Antonio Augusto Cortiana Tambara

2017-07-01

Full Text Available The objective of this study was to assess the edible biomass and chemical composition of forages grown on pure form, as a grass mix, and in grass-legume consortia. The following species were tested: white oats (Avena sativa, black oats (Avena strigosa, ryegrass (Lolium multiflorum, forage peanut (Arachis pintoi, white clover (Trifolium repens, and red clover (Trifolium pratense. The experiment consisted of sixteen treatments arranged in a completely randomized design. The parameters measured were total dry matter (PMST, neutral detergent fiber (NDF, acid detergent fiber (ADF, and crude protein (CP. No significant differences in PMST were found among the consortia (p > 0.05. Only the pure cultivated white clover (p > 0.05 was comparable to the consortia in terms of biomass production. The three legumes had the lowest average NDF values (p > 0.05, based on their contributions to the total NDF content of the consortia along the cuts. The ADF content increased for all treatments during the cuts. The results indicate that in pasture, legumes increase protein content, and forage consortia increase both the pasture production and the grazing period. Their chemical composition is adequate for boosting livestock production in pastures.

Faecal particle-size distribution from ewes fed grass silages harvested at different stages of maturity

DEFF Research Database (Denmark)

Jalali, Alireza; Nørgaard, Peder; Nadeau, E.

2008-01-01

The aim of this experiment was to study the effect of maturity stage of grass at harvest on particle size in faeces from ewes fed grass silage ad libitum. Eighteen pregnant Swedish ewes bearing two foetuses were given one of three treatments as their only feed. The treatments were early (ECS......), medium (MCS) or late (LCS) cut grass silage. The ECS, MCS and LCS silages contained 449, 578, and 634 g NDF kg-1 and 166, 111 and 81 g crude protein kg-1 DM, respectively. The in situ rumen indigestible NDF (INDF) was 77, 164 and 268 g kg-1 of NDF; the degradation rate of digestible NDF (kdDNDF) was 64......, 47 and 44 g kg-1 h-1 and DM intake was 2.5, 2.1 and 1.5 kg d-1 for ECS, MCS and LCS silage, respectively. Faeces samples were collected during four days, washed in nylon bags, freeze dried and sieved into six sieving fractions; bottom bowl (B), 0.106 (C), 0.212 (D), 0.5 (S), 1.0 (M) and 2.36 (O) mm...

GUI development for GRASS GIS

Directory of Open Access Journals (Sweden)

Martin Landa

2007-12-01

Full Text Available This article discusses GUI development for GRASS GIS. Sophisticated native GUI for GRASS is one of the key points (besides the new 2D/3D raster library, vector architecture improvements, etc. for the future development of GRASS. In 2006 the GRASS development team decided to start working on the new generation of GUI instead of improving the current GUI based on Tcl/Tk.

Mesquite pod meal in elephant grass silages - doi: 10.4025/actascianimsci.v35i3.12506

Directory of Open Access Journals (Sweden)

Otávio Rodrigues Machado Neto

2013-07-01

Full Text Available This study evaluated the chemical composition and in vitro dry matter digestibility (IVDMD of elephant grass silages at different growth stages (70, 90 and 110 days, with the addition (0, 5, 10 and 15%, on a fresh matter basis of mesquite pod meal. A completely randomized design (CRD was used in a factorial arrangement with four replications. PVC pipes 100 mm in diameter were used as experimental silos. After 30 days of ensilage, samples were taken from the open silos to determine chemical composition and IVDMD. The inclusion of mesquite pod meal (MPM increased (p 0.01 was detected between MPM concentrations and elephant grass cutting age for DM, CP and NDF contents in the silages. A decrease (p  

Flux cutting in superconductors

International Nuclear Information System (INIS)

Campbell, A M

2011-01-01

This paper describes experiments and theories of flux cutting in superconductors. The use of the flux line picture in free space is discussed. In superconductors cutting can either be by means of flux at an angle to other layers of flux, as in longitudinal current experiments, or due to shearing of the vortex lattice as in grain boundaries in YBCO. Experiments on longitudinal currents can be interpreted in terms of flux rings penetrating axial lines. More physical models of flux cutting are discussed but all predict much larger flux cutting forces than are observed. Also, cutting is occurring at angles between vortices of about one millidegree which is hard to explain. The double critical state model and its developments are discussed in relation to experiments on crossed and rotating fields. A new experiment suggested by Clem gives more direct information. It shows that an elliptical yield surface of the critical state works well, but none of the theoretical proposals for determining the direction of E are universally applicable. It appears that, as soon as any flux flow takes place, cutting also occurs. The conclusion is that new theories are required. (perspective)

Genome sequence analysis of the model grass Brachypodium distachyon: insights into grass genome evolution

Energy Technology Data Exchange (ETDEWEB)

Schulman, Al

2009-08-09

Three subfamilies of grasses, the Erhardtoideae (rice), the Panicoideae (maize, sorghum, sugar cane and millet), and the Pooideae (wheat, barley and cool season forage grasses) provide the basis of human nutrition and are poised to become major sources of renewable energy. Here we describe the complete genome sequence of the wild grass Brachypodium distachyon (Brachypodium), the first member of the Pooideae subfamily to be completely sequenced. Comparison of the Brachypodium, rice and sorghum genomes reveals a precise sequence- based history of genome evolution across a broad diversity of the grass family and identifies nested insertions of whole chromosomes into centromeric regions as a predominant mechanism driving chromosome evolution in the grasses. The relatively compact genome of Brachypodium is maintained by a balance of retroelement replication and loss. The complete genome sequence of Brachypodium, coupled to its exceptional promise as a model system for grass research, will support the development of new energy and food crops

EFECTO DE LA FERTILIZACIÓN NITROGENADA Y DE LA EDAD DE CORTE SOBRE LA DIGESTIBILIDAD INTESTINAL In vitro DE LA PROTEÍNA DEL PASTO KIKUYO (Pennisetum clandestinum Hochst NITROGEN FERTILIZATION EFFECT AND CUT AGE ON THE In vitro INTESTINAL DIGESTIBILITY OF KIKUYO GRASS (Pennisetum clandestinum Hochst PROTEIN

Directory of Open Access Journals (Sweden)

Marcelo Castañeda Colorado

2008-12-01

Full Text Available Con la finalidad de evaluar el efecto de la fertilización nitrogenada y de la edad de corte sobre la digestibilidad intestinal In vitro de la proteína del pasto kikuyo (Pennisetum clandestinum Hochst, se seleccionaron 16 parcelas a las cuales se les asignó uno de los siguientes tratamientos (cuatro parcelas/tratamiento: T1 (30 días de corte y 0 kg/N/Ha/Corte, T2 (60 días de corte y 0 kg/N/Ha/Corte, T3 (60 días de corte y 50 kg/N/Ha/Corte y T4 (30 días de corte y 50 kg/N/Ha/Corte. Luego de 120 días de tratamiento se recolectaron 5 submuestras de cada parcela con las que se conformó una muestra final para cada parcela en las que se analizó el contenido de proteína cruda y se realizó la prueba de degradabilidad ruminal a 16 horas y la prueba de digestibilidad intestinal In vitro de la proteína por el método de los tres pasos. Los resultados mostraron que no hubo efecto de la edad de corte, ni de la fertilización nitrogenada sobre el porcentaje de proteína cruda del pasto kikuyo. Los valores de digestibilidad intestinal como porcentaje de la proteína no degradable en rumen fueron: 52,51%, 56,14% para las praderas sin fertilizar con edad de corte de 30 y 60 días respectivamente y 43,38%, 45,40% para las praderas fertilizadas con edad de corte de 30 y 60 días respectivamente.With the purpose of evaluating the effect of the nitrogen fertilization and cut age on the In vitro intestinal digestibility of kikuyo grass (Pennisetum clandestinum Hochst protein, 16 plots were made, everyone assigned one of the following treatments (four plots per treatment: T1 (30 cut -day and 0 kg/ N/ Ha/ cut, T2 (60 cut-day and 0 kg/ N/ Ha/ cut, T3 (60 cut-day and 50 kg/ N/ Ha/ cut and T4 (30 cut-day and 50kg/ N/ Ha/ cut. 120 days after the treatment, 5 sub-samples were harvested of each plot, which were defined as final samples for each plot and, were realized to these samples a ruminal degradability trial for 16 hours and In vitro three-step method of

Prediction of genetic gains by selection indices using mixed models in elephant grass for energy purposes.

Science.gov (United States)

Silva, V B; Daher, R F; Araújo, M S B; Souza, Y P; Cassaro, S; Menezes, B R S; Gravina, L M; Novo, A A C; Tardin, F D; Júnior, A T Amaral

2017-09-27

Genetically improved cultivars of elephant grass need to be adapted to different ecosystems with a faster growth speed and lower seasonality of biomass production over the year. This study aimed to use selection indices using mixed models (REML/BLUP) for selecting families and progenies within full-sib families of elephant grass (Pennisetum purpureum) for biomass production. One hundred and twenty full-sib progenies were assessed from 2014 to 2015 in a randomized block design with three replications. During this period, the traits dry matter production, the number of tillers, plant height, stem diameter, and neutral detergent fiber were assessed. Families 3 and 1 were the best classified, being the most indicated for selection effect. Progenies 40, 45, 46, and 49 got the first positions in the three indices assessed in the first cut. The gain for individual 40 was 161.76% using Mulamba and Mock index. The use of selection indices using mixed models is advantageous in elephant grass since they provide high gains with the selection, which are distributed among all the assessed traits in the most appropriate situation to breeding programs.

Cuts of dairy-origin cattle fed mesquite pod meal in replacement of corn

Directory of Open Access Journals (Sweden)

Marina de Paula Almeida

2017-09-01

Full Text Available This study was carried out in order to assess commercial front and rear cuts of dairy-origin cattle fed mesquite pod meal. Twenty-five non-castrated male bovines (Holstein-Zebu, distributed according to a completely randomized design, with five animals per treatment, were used. The feed contained about 121.2 and 544.98 g kg-1 of crude protein and total digestible nutrients, respectively, and was composed of tifton grass hay, cornmeal, soybean meal, mesquite pod meal and mineral salt. The right half carcass of each animal was separated between the 5th and 6th ribs, in front and rear quarters, from which commercial cuts were obtained. There was no effect (p > 0.05 as to the replacement of corn for mesquite pod meal on the weights and yields of front cuts (shoulder, brisket, chuck, hump and flanks and rear cuts (tenderloin, shank, knuckle, thin flank, flat, eye round, rump tail, top side, cap of rump, rump, cut of rump, striploin, cap of cube roll. Mesquite pod meal can substitute cornmeal in 100% in the concentrate without changes in weight and yield of the commercial front and rear cuts of male bovines of dairy origin.

Effects of maturity and harvest season of grass-clover silage and of forage-to-concentrate ratio on milk production of dairy cows

DEFF Research Database (Denmark)

Alstrup, L; Søegaard, K; Weisbjerg, M R

2016-01-01

This study examined the effects of maturity and season of harvest of grass-clover silages and forage:concentrate ratio (FCR) on feed intake, milk production, chewing activity, digestibility, and fecal consistency of Holstein dairy cows. Comparison included 2 cuts in spring season (early and late......) and 2 cuts in summer season (early and late) combined with high FCR (80:20; HFCR) and low FCR (50:50; LFCR). The experiment included 24 lactating Holstein cows arranged as 2 repeated 4 × 4 Latin squares with four 21-d periods and included measurements of feed composition, feed intake, milk production...... digestible than late maturity cuts, which was also reflected in a lower concentration of neutral detergent fiber (NDF) in early maturity cuts, whereas summer cuts had a higher crude protein concentration than spring cuts. Increased maturity decreased the intake of DM and energy, increased NDF intake...

The effects of cutting parameters on cutting forces and heat generation when drilling animal bone and biomechanical test materials.

Science.gov (United States)

Cseke, Akos; Heinemann, Robert

2018-01-01

The research presented in this paper investigated the effects of spindle speed and feed rate on the resultant cutting forces (thrust force and torque) and temperatures while drilling SawBones ® biomechanical test materials and cadaveric cortical bone (bovine and porcine femur) specimens. It also investigated cortical bone anisotropy on the cutting forces, when drilling in axial and radial directions. The cutting forces are only affected by the feed rate, whereas the cutting temperature in contrast is affected by both spindle speed and feed rate. The temperature distribution indicates friction as the primary heat source, which is caused by the rubbing of the tool margins and the already cut chips over the borehole wall. Cutting forces were considerably higher when drilling animal cortical bone, in comparison to cortical test material. Drilling direction, and therewith anisotropy, appears to have a negligible effect on the cutting forces. The results suggest that this can be attributed to the osteons being cut at an angle rather than in purely axial or radial direction, as a result of a twist drill's point angle. Copyright © 2017 IPEM. Published by Elsevier Ltd. All rights reserved.

Endophytic Epichloë species and their grass hosts: from evolution to applications.

Science.gov (United States)

Saikkonen, Kari; Young, Carolyn A; Helander, Marjo; Schardl, Christopher L

2016-04-01

The closely linked fitness of the Epichloë symbiont and the host grass is presumed to align the coevolution of the species towards specialization and mutually beneficial cooperation. Ecological observations demonstrating that Epichloë-grass symbioses can modulate grassland ecosystems via both above- and belowground ecosystem processes support this. In many cases the detected ecological importance of Epichloë species is directly or indirectly linked to defensive mutualism attributable to alkaloids of fungal-origin. Now, modern genetic and molecular techniques enable the precise studies on evolutionary origin of endophytic Epichloë species, their coevolution with host grasses and identification the genetic variation that explains phenotypic diversity in ecologically relevant characteristics of Epichloë-grass associations. Here we briefly review the most recent findings in these areas of research using the present knowledge of the genetic variation that explains the biosynthetic pathways driving the diversity of alkaloids produced by the endophyte. These findings underscore the importance of genetic interplay between the fungus and the host in shaping their coevolution and ecological role in both natural grass ecosystems, and in the agricultural arena.

Dynamic model for the transfer of CS-137 through the soil-grass-lamb foodchain

DEFF Research Database (Denmark)

Nielsen, S.P.

1994-01-01

A dynamic radioecological model for the transfer of radiocaesium through the soil-grass-lamb foodchain was constructed on the basis of field data collected in 1990–1993 from the Nordic countries: Denmark, Faroe Islands, Finland, Iceland, Norway and Sweden. The model assumes an initial soil...... contamination of one kilobecquerel of 137Cs per square metre and simulates the transfer to grass through root uptake in addition to direct contamination from resuspended activity. The model covers two different soil types: clay-loam and organic, with significantly different transfers of radiocaesium to grass...

Modelling the transfer of 14C from the atmosphere to grass: A case study in a grass field near AREVA-NC La Hague

International Nuclear Information System (INIS)

Aulagnier, C.; Le Dizès, S.; Maro, D.; Hébert, D.; Lardy, R.; Martin, R.; Gonze, M.-A.

2012-01-01

Radioactive 14 C is formed as a by-product of nuclear power generation and from operation of nuclear fuel reprocessing plants like AREVA-NC La Hague (North France), which releases about 15 TBq per year of 14 C into the atmosphere. Since the autumn of 2006, 14 C activity concentrations in samples from the terrestrial environment (air, grass and soil) have been monitored monthly on grassland 2 km downwind of the reprocessing plant. The monitoring data provides an opportunity to validate radioecology models used to assess 14 C transfer to grassland ecosystems. This article compares and discusses the ability of two different models to reproduce the observed temporal variability in grass 14 C activity in the vicinity of AREVA-NC La Hague. These two models are the TOCATTA model which is specifically designed for modelling transfer of 14 C and tritium in the terrestrial environment, and PaSim, a pasture model for simulating grassland carbon and nitrogen cycling. Both TOCATTA and PaSim tend to under-estimate the magnitude of observed peaks in grass 14 C activity, although they reproduce the general trends. PaSim simulates 14 C activities in substrate and structural pools of the plant. We define a mean turn-over time for 14 C within the plant, which is based on both experimental data and the frequency of cuts. An adapted PaSim result is presented using the 15 and 20 day moving average results for the 14 C activity in the substrate pool, which shows a good match to the observations. This model reduces the Root Mean Square Error (RMSE) by nearly 40% in comparison to TOCATTA. - Highlights: ► We model 14 C transfer from the atmosphere to grass near AREVA-NC reprocessing plant. ► Both models considered under-estimate the observed variability and highest peaks. ► A model based solely on the sap 14 C activity and mean turn-over time is considered. ► It performs well and could be applied to case studies around nuclear facilities.

Utilisation of forage grasses for decontamination of spray-irrigated leachate from a municipal sanitary landfill

Energy Technology Data Exchange (ETDEWEB)

Menser, H.A.; Winant, W.M.; Bennett, O.L.; Lundberg, P.E.

1979-01-01

Spray irrigation was used to test the survival and efficiency of forage grasses as a concentrating mechanism for the inorganic waste elements in leachate from a municipal solid waste sanitary landfill. Lime (0.67 metric tonnes ha), rock phosphate, and superphosphate (each at 11.2 metric tonnes ha) were applied in a randomised complete block design to reed canarygrass Phalaris arundinacea L., tall fescue Festuca arundinacea Schreb., cv. Ky31, orchardgrass Dactylis glomerata L., bromegrass Bromus inermis Leyss., and bermudagrass Cynodon dactylon (L.) Pers. cvs. Midland and Tufcote. Leachate was applied by overhead rotary sprinklers in weekly 8-h applications from 22 October 1974 to 28 April 1975. The total application averages about 155 cm. Sprayed leachate contained about 500 ppM of Ca, 150 to 200 ppM of Na, Fe, and Cl, 50 to 100 ppM of Mn, K, Mg, and N, 2 to 5 ppM of Al, Sr, Zn, and P, and less than 0.5 ppM of Ni, Co, Cr, Cu, Pb, and Cd. Chemical oxygen demand (COD) decreased from approximately 7500 mg liter in water emerging from landfill drains to 5000 mg litre in sprayed leachate. Electroconductivity ranged from 3000 to 4000 ..mu..mhos cm and pH from 5.3 to about 5.5. Leachate irrigation appreciably increased Na, Fe, Mn, Cl, and S levels in all forages except orchardgrass. Lime significantly prevented Mn accumulation and benefited forage grass persistence. Reed canarygrass generally contained the highest levels of most elements and along with Tufcote bermudagrass was more leachate-tolerant than other grasses. Seasonal factors affected the uptake of several elements, e.g. Na, Fe, Mn, Zn, K and Co were significantly lower in regrowth cuttings as compared with first cuttings of Midland bermudagrass and reed canarygrass.

Bidirectional motility of the fission yeast kinesin-5, Cut7

Energy Technology Data Exchange (ETDEWEB)

Edamatsu, Masaki, E-mail: cedam@mail.ecc.u-tokyo.ac.jp

2014-03-28

Highlights: • Motile properties of Cut7 (fission yeast kinesin-5) were studied for the first time. • Half-length Cut7 moved toward plus-end direction of microtubule. • Full-length Cut7 moved toward minus-end direction of microtubule. • N- and C-terminal microtubule binding sites did not switch the motile direction. - Abstract: Kinesin-5 is a homotetrameric motor with its motor domain at the N-terminus. Kinesin-5 crosslinks microtubules and functions in separating spindle poles during mitosis. In this study, the motile properties of Cut7, fission yeast kinesin-5, were examined for the first time. In in vitro motility assays, full-length Cut7 moved toward minus-end of microtubules, but the N-terminal half of Cut7 moved toward the opposite direction. Furthermore, additional truncated constructs lacking the N-terminal or C-terminal regions, but still contained the motor domain, did not switch the motile direction. These indicated that Cut7 was a bidirectional motor, and microtubule binding regions at the N-terminus and C-terminus were not involved in its directionality.

Intake and digestion of wethers fed with dwarf elephant grass hay with or without the inclusion of peanut hay.

Science.gov (United States)

Schnaider, Maria Alice; Ribeiro-Filho, Henrique Mendonça Nunes; Vilmar Kozloski, Gilberto; Reiter, Tatiana; Dall Orsoletta, Aline Cristina; Dallabrida, Ademar Luiz

2014-08-01

The aim of this study was to evaluate the effect of the inclusion of peanut (Arachis pintoi cv. Amarillo) hay in diets based on dwarf elephant grass (DEG, Pennisetum purpureum Schum cv. Kurumi) hay of different regrowth ages on forage intake and digestibility in wether lambs. The experimental treatments consisted of DEG hay with an interval of regrowth of 30 or 45 days offered as the only feed or in mixture with peanut hay (300 g/kg of total dry matter (DM)), which were tested in eight Texel × Suffolk crossbred wethers in a replicated 4 × 4 Latin square experiment. Both organic matter (OM) and digestible OM intakes were higher (P < 0.05) in animals receiving the legume forage. Total apparent OM digestibility was higher (P < 0.05) at an increased grass regrowth age. Ruminal OM digestibility increased (P < 0.05) with legume inclusion and at a higher grass regrowth age. The nitrogen (N) intake was higher (P < 0.05) in legume treatments and lower (P < 0.05) as the grass regrowth age increased, but retention of N was not affected by treatments. Duodenal flow of both, non-ammonia N and microbial N, were not affected by legume inclusion and were lower (P < 0.05) as grass regrowth age increased. The efficiency of rumen microbial protein synthesis (ERMPS) was negatively affected (P < 0.05) by legume inclusion and was lower (P < 0.05) as the grass regrowth age increased. Supplementation of dwarf elephant grass hay cut at the vegetative stage with peanut legume hay improves nutritional supply to wethers due to an increase in the forage intake.

Analysis of the soil food web structure under grass and grass clover

NARCIS (Netherlands)

Eekeren, van N.J.M.; Smeding, F.W.; Vries, de F.T.; Bloem, J.

2006-01-01

The below ground biodiversity of soil organisms plays an important role in the functioning of the the soil ecosystem, and consequently the above ground plant production. The objective of this study is to investigate the effect of grass or grass-clover in combination with fertilisation on the soil

Biomass accumulation and chemical composition of Massai grass intercropped with forage legumes on an integrated crop-livestock-forest system

Directory of Open Access Journals (Sweden)

Tatiana da Costa Moreno Gama

2014-06-01

Full Text Available The objective was to evaluate the use of woody legumes (Albizia lebbeck, Cratylia argentea, Dipteryx Allata (Baru, a Leucaena hybrid (L. leucocephala + L. diversifolia, and Leucaena leucocephalacv. Cunningham and herbaceous legumes (Arachis pintoi intercropped with Panicum maximum cv. Massai, simultaneously implanted in a maize crop. The study made use of a randomized block experimental design with four replications. Assessments of biomass accumulation and forage nutritional value were made after the maize harvest, between June 2008 and October 2010. It was found that the residues of maize provided better growing conditions for Massai grass during the dry season. L. leucocephala cv. Cunningham and the Leucaena hybrid had the highest accumulation of all forage legumes evaluated, and provided the best nutritional value of all the arrangements tested. Of all woody legumes tested in this system, Leucaena was considered feasible for intercropping with Massai grass. The intercrop of perennial woody Baru with maize is not recommended. Albizia lebbeck and Cratylia argentea require further study, especially the yield assessment at different cutting intervals and cutting heights. Arachis pintoi had a low participation in the intercropping, showing greater performance over time, indicating slow thriving in this experimental condition.

Classification of grass pollen through the quantitative analysis of surface ornamentation and texture.

Science.gov (United States)

Mander, Luke; Li, Mao; Mio, Washington; Fowlkes, Charless C; Punyasena, Surangi W

2013-11-07

Taxonomic identification of pollen and spores uses inherently qualitative descriptions of morphology. Consequently, identifications are restricted to categories that can be reliably classified by multiple analysts, resulting in the coarse taxonomic resolution of the pollen and spore record. Grass pollen represents an archetypal example; it is not routinely identified below family level. To address this issue, we developed quantitative morphometric methods to characterize surface ornamentation and classify grass pollen grains. This produces a means of quantifying morphological features that are traditionally described qualitatively. We used scanning electron microscopy to image 240 specimens of pollen from 12 species within the grass family (Poaceae). We classified these species by developing algorithmic features that quantify the size and density of sculptural elements on the pollen surface, and measure the complexity of the ornamentation they form. These features yielded a classification accuracy of 77.5%. In comparison, a texture descriptor based on modelling the statistical distribution of brightness values in image patches yielded a classification accuracy of 85.8%, and seven human subjects achieved accuracies between 68.33 and 81.67%. The algorithmic features we developed directly relate to biologically meaningful features of grass pollen morphology, and could facilitate direct interpretation of unsupervised classification results from fossil material.

Meadow-grass gall midge

DEFF Research Database (Denmark)

Hansen, Lars Monrad

The area with meadow-grass (Poa pratensis, L.) grown for seed production in Den-mark is a significant proportion of the entire seed production. The meadow-grass gall midge (Mayetiola schoberi, Barnes 1958) is of considerable economic importance since powerful attacks can reduce the yield...

Forage yield and nutritive value of Tanzania grass under nitrogen supplies and plant densities

Directory of Open Access Journals (Sweden)

Fabrício Paiva de Freitas

2012-04-01

Full Text Available The objective of this experiment was to evaluate the nitrogen and plant density influence on the yield, forage dissection and nutritive value of Tanzania grass (Panicum maximum Jacq.. The design was of completely randomized blocks with three replications in a factorial arrangement with four nitrogen levels (0, 80, 160 or 320 kg/ha N and three plant densities (9, 25 or 49 plants/m². The plots were cut at 25 cm from soil level when the canopy reached 95% of light interception. The total dry matter forage yield and dry matter forage yield per harvest increased linearly with the nitrogen fertilization. The leaf and stem yield had the same response. The senesced forage yield was quadratically influenced by the nitrogen. The stems ratio in the morphologic composition was high in the high nitrogen levels and in the low plant densities. The leaf:stem ratio showed high values in this trial, but it was increased in plots without nitrogen and high plant density. The pre-grazing height was reduced with the increase in plant density. The nutritive value was favored by the nitrogen fertilization, which increased the crude protein level and reduced neutral detergent fiber and lignin. These factors increased the leaf and stem in vitro digestibility of organic matter. Nitrogen fertilization increases the forage yield of Tanzania grass under rotational grazing. After the establishment, plant density has little influence on the Tanzania grass yield and its forage dissection. The harvest with 95% light interception improves the structure and nutritive value of Tanzania grass pastures.

The Gesso Cut for Printmaking

Science.gov (United States)

Kelly, Perry; Sarvis, Alva

1969-01-01

Directions are given for the preparation, cutting, and printing of a gesso board. A gesso cut is defined as a board coated with gesso into which a design has been impressed. The process is similar to the woodcut, but offers greater textural possibilities. (BF)

Nutritional value of cabbage and kikuyu grass as food for grass carp ...

African Journals Online (AJOL)

and digestibility coefficients were obtained for the protein, fibre, ash and fat contents of both ... Cabbage is a superior feed compared to grass for raising grass carp and a suitable low-cost alternative ... Materials and Methods ... from jumping out and was fitted with an air lift under- .... In: Aquatic weeds in South East Asia.

Estimating grass and grass silage degradation characteristics by in situ and in vitro gas production methods

Directory of Open Access Journals (Sweden)

Danijel Karolyi

2010-01-01

Full Text Available Fermentation characteristics of grass and grass silage at different maturities were studied using in situ and in vitro gas production methods. In situ data determined difference between grass and silage. Degradable fraction decreased as grass matured while the undegradable fraction increased. Rate of degradation (kd was slower for silage than fresh grass. Gas production method (GP data showed that fermentation of degradable fraction was different between stage of maturity in both grass and silage. Other data did not show any difference with the exception for the rate of GP of soluble and undegradable fraction. The in situ degradation characteristics were estimated from GP characteristics. The degradable and undegradable fractions could be estimated by multiple relationships. Using the three-phases model for gas production kd and fermentable organic matter could be estimated from the same parameters. The only in situ parameter that could not be estimated with GP parameters was the soluble fraction. The GP method and the three phases model provided to be an alternative to the in situ method for animal feed evaluations.

High green fodder yielding new grass varieties

OpenAIRE

C. Babu, K. Iyanar and A. Kalamani

2014-01-01

Two high biomass yielding forage grass varieties one each in Cumbu Napier hybrid and Guinea grass have been evolved at the Department of Forage Crops, Centre for Plant Breeding and Genetics, Tamil Nadu Agricultural University, Coimbatore and identified for release at national (All India) level as Cumbu Napier hybrid grass CO (BN) 5 and Guinea grass CO (GG) 3 during 2012 and 2013 respectively. Cumbu Napier hybrid grass CO (BN) 5 secured first rank at all national level with reference to green ...

Method of dismantling cylindrical structure by cutting

International Nuclear Information System (INIS)

Harada, Minoru; Mitsuo, Kohei; Yokota, Isoya; Nakamura, Kenjiro.

1989-01-01

This invention concerns a method of cutting and removing cylindrical structures, for example, iron-reinforced concrete materials such as thermal shielding walls in BWR type power plants into block-like form. That is, in a method of cutting and removing the cylindrical structure from the side of the outer wall, the structural material is cut from above to below successively in the axial direction and the circumferential direction by means abrasive jet by remote operation and cut into blocks each of a predetermined size. The cut out blocks are successively taken out. Cutting of the material from above to below by remote operation and taking out of small blocks causes no hazards to human body. Upon practicing the present invention, it is preferred to use a processing device for slurry and exhaust gases for preventing scattering of activated dismantled pieces or powdery dusts. (K.M.)

Regge cuts: A general approach

International Nuclear Information System (INIS)

Weis, J.H.

1976-01-01

We discuss an approach to the calculation of Regge-cut contributions to scattering amplitudes which relies only on the general structure of the physical Reggeon couplings. It thus allows a unified treatment of disparate models [such as the Feynman (Mandelstam) graph model and the dual model] and a general derivation of the Abramovskii--Gribov--Kancheli (AGK) rules. The structure of the Reggeon couplings is expressed through integrals over complex helicity. The Regge-cut amplitude can then be obtained, and its s-channel discontinuity, taken; there results a direct derivation of a set of ''cutting rules'' which express the total discontinuity as a sum of terms involving various discontinuities of the Reggeon couplings. The equality of these discontinuities follows directly if the singularities in complex helicity are the usual ones. Thus the AGK rules are seen to be quite model independent. Here we study in detail the simplest example: the Reggeon-particle cut in the four-particle amplitude

Different techniques to study rumen fermentation characteristics of maturing grass and grass silage

NARCIS (Netherlands)

Cone, J.W.; Gelder, van A.H.; Soliman, I.A.; Visser, de H.; Vuuren, van A.M.

1999-01-01

Grass samples were harvested during the 1993 growing season after a precut on April 27, 1993 and were stored frozen or left to ensile in 30-L buckets. Effects on chemical composition and fermentation kinetics of the maturation of the grass and of ensiling were investigated. Chemical composition and

Sensitization to cereals and peanut evidenced by skin prick test and specific IgE in food-tolerant, grass pollen allergic patients

Directory of Open Access Journals (Sweden)

Martens Maria

2011-12-01

Full Text Available Abstract Background The botanical relation between grass and cereal grains may be relevant when diagnosing food allergy to cereals. The aim was to investigate the diagnostic specificity of skin prick test (SPT and specific immunoglobulin E (sIgE tests to cereals and peanut in grass pollen allergic subjects without history of, and clinically reactions to foods botanically related to grass. Methods 70 subjects (41 females; mean age 32 years and 20 healthy controls (13 females; mean age 24 years were tested by open food challenge (OFC with cereals and peanut. SPT and sIgE both with Immulite® (Siemens and ImmunoCAP® (Phadia to grass and birch pollen, cereals, peanut and bromelain were performed. Results Of the 65 OFC-negative subjects 29-46% (SPT, depending on cut-off, 20% (Immulite and 38% (ImmunoCAP had positive results to one or more of the foods tested. Controls were negative in all tests. Cross-reactive carbohydrate determinants (CCD as evidenced by reaction to bromelain could explain only a minority of the measured IgE-sensitizations. Conclusion Grass pollen allergic patients with documented food tolerance to cereals and peanut may express significant sensitization. False-positive cereal or peanut allergy diagnoses may be a quantitatively important problem both in routine clinical work and epidemiological studies.

Automated Laser Cutting In Three Dimensions

Science.gov (United States)

Bird, Lisa T.; Yvanovich, Mark A.; Angell, Terry R.; Bishop, Patricia J.; Dai, Weimin; Dobbs, Robert D.; He, Mingli; Minardi, Antonio; Shelton, Bret A.

1995-01-01

Computer-controlled machine-tool system uses laser beam assisted by directed flow of air to cut refractory materials into complex three-dimensional shapes. Velocity, position, and angle of cut varied. In original application, materials in question were thermally insulating thick blankets and tiles used on space shuttle. System shapes tile to concave or convex contours and cuts beveled edges on blanket, without cutting through outer layer of quartz fabric part of blanket. For safety, system entirely enclosed to prevent escape of laser energy. No dust generated during cutting operation - all material vaporized; larger solid chips dislodged from workpiece easily removed later.

The effect of cutting times on goat’s rue (Galega orientalis Lam. leys

Directory of Open Access Journals (Sweden)

Perttu Virkajärvi

1991-12-01

Full Text Available The effect of four different cutting times, both in spring and autumn, on goat’s rue was studied at Viikki Experimental farm of the University of Helsinki in 1983—89. Goat’s rue showed good persistence. The plots remained in good condition, the average yield being even in the sixth year 9000 kg DM per hectare. The development of goat’s rue starts early in the spring. The growth rate and development of CP content are similar to those of red clover. The development of CF is, however, more similar to grasses. Thus, the crude fiber content limits the cutting times of goat’s rue more than the changes in crude protein content. The most suitable cutting time in spring is at the beginning of flowering in mid-June, and in autumn during the second week of September. With this management a yield of 8360 kg DM per hectare per year was reached during the experimental years. The pooled CP content was 19.9 % and the CP yield was 1660 kg/ha. The CF content was in the first cut 27.9 % and in the second cut 29.1 %. The amount of weeds in the five to six year leys was 12—18 %.

Post-ruminal digestibility of crude protein from grass and grass silages in cows

NARCIS (Netherlands)

Cone, J.W.; Gelder, van A.H.; Mathijssen-Kamman, A.A.; Hindle, V.A.

2006-01-01

Grass samples were grown on a clay or sandy soil, fertilised with 150 or 300 kg N/ha per year, and harvested on different days during two consecutive growing seasons. The grass samples were stored frozen or ensiled after wilting to approximately 250 or 450 g DM/kg. The recoveries of crude protein

Rabbit IgG directed to a synthetic C-terminal peptide of the major grass pollen allergen Lol p I inhibits human basophil histamine release induced by natural Lol p I

NARCIS (Netherlands)

van Ree, R.; Aalberse, R. C.

1995-01-01

The potential role of allergen-specific IgG antibodies as 'blocking' antibodies in allergen-induced human basophil histamine release was investigated. This was studied in a model with the major grass pollen allergen Lol p I and polyclonal rabbit antisera directed against this allergen and against a

Direct surface analysis of pesticides on soil, leaves, grass, and stainless steel by static secondary ion mass spectrometry

Energy Technology Data Exchange (ETDEWEB)

Ingram, J.C.; Groenewold, G.S.; Appelhans, A.D.; Delmore, J.E.; Olson, J.E.; Miller, D.L. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

1997-02-01

Direct surface analyses by static secondary ion mass spectrometry (SIMS) were performed for the following pesticides adsorbed on dandelion leaves, grass, soil, and stainless steel samples: alachlor, atrazine, captan, carbofuran, chlorpyrifos, chlorosulfuron, chlorthal-dimethyl, cypermethrin, 2,4-D, diuron, glyphosate, malathion, methomyl, methyl arsonic acid, mocap, norflurazon, oxyfluorfen, paraquat, temik, and trifluralin. The purpose of this study was to evaluate static SIMS as a tool for pesticide analysis, principally for use in screening samples for pesticides. The advantage of direct surface analysis compared with conventional pesticide analysis methods is the elimination of sample pretreatment including extraction, which streamlines the analysis substantially; total analysis time for SIMS analysis was ca. 10 min/sample. Detection of 16 of the 20 pesticides on all four substrates was achieved. Of the remaining four pesticides, only one (trifluralin) was not detected on any of the samples. The minimum detectable quantity was determined for paraquat on soil in order to evaluate the efficacy of using SIMS as a screening tool. Paraquat was detected at 3 pg/mm{sup 2} (c.a. 0.005 monolayers). The results of these studies suggest that SIMS is capable of direct surface detection of a range of pesticides, with low volatility, polar pesticides being the most easily detected. 25 refs., 2 figs., 2 tabs.

Anisotropy of Single-Crystal Silicon in Nanometric Cutting.

Science.gov (United States)

Wang, Zhiguo; Chen, Jiaxuan; Wang, Guilian; Bai, Qingshun; Liang, Yingchun

2017-12-01

The anisotropy exhibited by single-crystal silicon in nanometric cutting is very significant. In order to profoundly understand the effect of crystal anisotropy on cutting behaviors, a large-scale molecular dynamics model was conducted to simulate the nanometric cutting of single-crystal silicon in the (100)[0-10], (100)[0-1-1], (110)[-110], (110)[00-1], (111)[-101], and (111)[-12-1] crystal directions in this study. The simulation results show the variations of different degrees in chip, subsurface damage, cutting force, and friction coefficient with changes in crystal plane and crystal direction. Shear deformation is the formation mechanism of subsurface damage, and the direction and complexity it forms are the primary causes that result in the anisotropy of subsurface damage. Structurally, chips could be classified into completely amorphous ones and incompletely amorphous ones containing a few crystallites. The formation mechanism of the former is high-pressure phase transformation, while the latter is obtained under the combined action of high-pressure phase transformation and cleavage. Based on an analysis of the material removal mode, it can be found that compared with the other crystal direction on the same crystal plane, the (100)[0-10], (110)[-110], and (111)[-101] directions are more suitable for ductile cutting.

Development of lathe tool dynamometer and finding cutting forces using negative and positive rake angle cutting tool

International Nuclear Information System (INIS)

Zeb, M.A.; Irfan, M.A.

2005-01-01

Most output parameters in machining, such as cutting forces, temperatures, strains and the work-hardening of the chip material, are directly related to the chip formation process. The characteristics of machining processes can be well understood if the forces and strains during chip formation are known. In this research a lathe tool dynamometer was used to measure cutting forces involved in machining of Steel 1045 and Aluminum 2219 T62. High Speed Steel (HSS), cutting tools with positive and negative rake angles were used. It was observed that more cutting forces are experienced by the cutting tool with positive rake angle as compared to the forces experienced by the cutting tool with negative rake angle. For steel 1045 the cutting forces using positive rake angle cutting tool were much higher. This suggested that for harder materials using a negative rake angle is more suitable for cutting. (author)

Rehabilitation with pasture after open-cut coal mining at three sites in the Bowen Coal Basin of Queensland

Energy Technology Data Exchange (ETDEWEB)

Coaldrake, J E

1978-03-01

Open-cut coal mining in the Bowen Coal Basin leaves piled heaps of overburden, chiefly of a clayey nature, that have high pH, high salinity, and low contents of phosphorus and nitrogen. It is likely that pastures of introduced sub- tropical species can be used as a first stage in rehabilitating these areas, and possibly to convert them into permanent grazing lands. In field experiments the grasses Cenchrus ciliaris cv. Biloela (Buffel grass), Chloris gayana cv. Pioneer (Rhodes grass) and Panicum maximum var. trichoglume cv. Petrie (green panic) all showed satisfactory establishment and growth at two sites out of three tested. There was a clear response to superphosphate, with 400 kg/ha proving better over a two-year period than 100 kg/ha. Responses to nitrogen (as ammonium sulphate and as ammonium nitrate) were variable, and there was no response to gypsum and manganese at the one site tested for them. Of three tropical legumes subjected to limited testing only leucaena leucocephala gave encouraging results.

Growth and enzymatic activity of Leucoagaricus gongylophorus, a mutualistic fungus isolated from the leaf-cutting ant Atta mexicana, on cellulose and lignocellulosic biomass.

Science.gov (United States)

Vigueras, G; Paredes-Hernández, D; Revah, S; Valenzuela, J; Olivares-Hernández, R; Le Borgne, S

2017-08-01

A mutualistic fungus of the leaf-cutting ant Atta mexicana was isolated and identified as Leucoagaricus gongylophorus. This isolate had a close phylogenetic relationship with L. gongylophorus fungi cultivated by other leaf-cutting ants as determined by ITS sequencing. A subcolony started with ~500 A. mexicana workers could process 2 g day -1 of plant material and generate a 135 cm 3 fungus garden in 160 days. The presence of gongylidia structures of ~35 μm was observed on the tip of the hyphae. The fungus could grow without ants on semi-solid cultures with α-cellulose and microcrystalline cellulose and in solid-state cultures with grass and sugarcane bagasse, as sole sources of carbon. The maximum CO 2 production rate on grass (V max  = 17·5 mg CO 2  L g -1  day -1 ) was three times higher than on sugarcane bagasse (V max  = 6·6 mg CO 2  L g -1 day -1 ). Recoveries of 32·9 mg glucose  g biomass -1 and 12·3 mg glucose  g biomass -1 were obtained from the fungal biomass and the fungus garden, respectively. Endoglucanase activity was detected on carboxymethylcellulose agar plates. This is the first study reporting the growth of L. gongylophorus from A. mexicana on cellulose and plant material. According to the best of our knowledge, this is the first report about the growth of Leucoagaricus gongylophorus, isolated from the colony of the ant Atta mexicana, on semisolid medium with cellulose and solid-state cultures with lignocellulosic materials. The maximum CO 2 production rate on grass was three times higher than on sugarcane bagasse. Endoglucanase activity was detected and it was possible to recover glucose from the fungal gongylidia. The cellulolytic activity could be used to process lignocellulosic residues and obtain sugar or valuable products, but more work is needed in this direction. © 2017 The Society for Applied Microbiology.

Effects of maturity and harvest season of grass-clover silage and of forage-to-concentrate ratio on milk production of dairy cows.

Science.gov (United States)

Alstrup, L; Søegaard, K; Weisbjerg, M R

2016-01-01

This study examined the effects of maturity and season of harvest of grass-clover silages and forage:concentrate ratio (FCR) on feed intake, milk production, chewing activity, digestibility, and fecal consistency of Holstein dairy cows. Comparison included 2 cuts in spring season (early and late) and 2 cuts in summer season (early and late) combined with high FCR (80:20; HFCR) and low FCR (50:50; LFCR). The experiment included 24 lactating Holstein cows arranged as 2 repeated 4 × 4 Latin squares with four 21-d periods and included measurements of feed composition, feed intake, milk production and composition, chewing activities, digestibilities, and fecal dry matter (DM) concentration and scoring. Forages were fed as two-thirds grass-clover and one-third corn silage supplemented with either 20 or 50% concentrate. Rations were fed ad libitum as total mixed rations. Early maturity cuts were more digestible than late maturity cuts, which was also reflected in a lower concentration of neutral detergent fiber (NDF) in early maturity cuts, whereas summer cuts had a higher crude protein concentration than spring cuts. Increased maturity decreased the intake of DM and energy, increased NDF intake, and decreased the yield of energy-corrected milk (ECM). Summer cuts increased the ECM yield compared with spring cuts. Milk yield (kg and kilogram of ECM) was numerically higher for cows fed early summer cut, independent of FCR in the ration. Milk protein concentration decreased, or tended to decrease, with maturity. For LFCR, the milk fat concentration increased with maturity resulting in a decreased protein:fat ratio. At HFCR, increased maturity increased the time spent chewing per kilogram of DM. Digestibility of silages was positively correlated with the fecal DM concentration. The DM intake and ECM yield showed no significant response to FCR in the ration, but the milk composition was affected. The LFCR decreased the milk fat percentage and increased the milk protein

Grass pollen immunotherapy induces highly cross-reactive IgG antibodies to group V allergen from different grass species

NARCIS (Netherlands)

van Ree, R.; Brewczyński, P. Z.; Tan, K. Y.; Mulder-Willems, H. J.; Widjaja, P.; Stapel, S. O.; Aalberse, R. C.; Kroon, A. M.

1995-01-01

Sera from two groups of patients receiving grass pollen immunotherapy were tested on IgG reactivity with group V allergen from six different grass species. One group of patients was treated with a mixture of 10 grass species, and the other with a mixture of five. Only Lolium perenne, Dactylis

Spatiotemporal Variation in the Environmental Controls of C4-Grass Origin and Ecology: Insights from Grass-Pollen δ13C Data

Science.gov (United States)

Nelson, D. M.; Urban, M.; Hu, F.

2014-12-01

Understanding the environmental factors controlling the origin and shifting abundance of C4 grasses in Earth's history is useful for projecting the response of C4-grass dominated grasslands to future environmental change. Unfortunately, grass pollen is typically morphologically indistinct, making palynological analysis a blunt tool for studying C4-grasses in the paleorecord. δ13C of individual grass-pollen grains using a spooling wire microcombustion device interfaced with an isotope ratio mass spectrometer (Single Pollen Isotope Ratio AnaLysis, SPIRAL) overcomes this challenge and the potential biases of δ13C data from other substrates (e.g. leaf waxes). To assess the presence and relative abundance of C3- and C4-grass pollen in samples of unknown composition, we developed a hierarchical Bayesian model, trained with ~1,900 δ13C values from pollen grains of 31 grass species. Surface-sediment data from Africa, Australia, and North America demonstrate the reliability of this technique for quantifying C4-grass abundance on the landscape. To investigate the timing and control of the origin of C4-grasses we analyzed samples from the Oligocene-Miocene from Europe and from the Eocene from North America. Results indicate that C4 grasses appeared on the landscape of southwest Europe no later than the early Oligocene, implying that low atmospheric pCO2 may not have been the main driver and/or precondition for the development of C4 photosynthesis in the grass family. In contrast, we found no evidence for C4 grasses in the southeast United States before pCO2 fell. In application of SPIRAL to the late Quaternary, we found that shifts in pCO2 and moisture balance exerted key controls on the relative abundance of C3 and C4 grasses in Africa and Australia. Overall, our results imply that as in the past, future changes in the C3/C4 composition of grass-dominated ecosystems will likely exhibit striking spatiotemporal variability as a result of differing combinations of

Improving the energy balance of grass-based anaerobic digestion through combined harvesting and pretreatment.

Science.gov (United States)

Tsapekos, P; Kougias, P G; Egelund, H; Larsen, U; Pedersen, J; Trénel, P; Angelidaki, I

2017-08-01

An important challenge that has to be addressed to achieve sustainable anaerobic digestion of lignocellulosic substrates is the development of energy and cost efficient pretreatment methods. Technologies orientated to simultaneously harvest and mechanically pretreat the biomass at the field could meet these criteria as they can potentially reduce the energy losses. The objective of this study was to elucidate the effect of two full-scale harvesting machines to enhance the biogas production and subsequently, improve energy balance. The performances of Disc-mower and Excoriator were assessed on meadow and cultivated grass silages. The results showed that relatively high methane production can be achieved from meadow and cultivated grass harvested in different seasons. The findings indicated that the bioenergy production can be improved based on the selection of the appropriate harvesting technology. More specifically, Excoriator, which cuts and subsequently applies shearing forces on harvested biomass, enhanced the methane production up to 10% and the overall energy budget was improved proportionally to the driving speed increase. Copyright © 2016 Elsevier Ltd. All rights reserved.

Grass leaves as potential hominin dietary resources.

Science.gov (United States)

Paine, Oliver C C; Koppa, Abigale; Henry, Amanda G; Leichliter, Jennifer N; Codron, Daryl; Codron, Jacqueline; Lambert, Joanna E; Sponheimer, Matt

2018-04-01

Discussions about early hominin diets have generally excluded grass leaves as a staple food resource, despite their ubiquity in most early hominin habitats. In particular, stable carbon isotope studies have shown a prevalent C 4 component in the diets of most taxa, and grass leaves are the single most abundant C 4 resource in African savannas. Grass leaves are typically portrayed as having little nutritional value (e.g., low in protein and high in fiber) for hominins lacking specialized digestive systems. It has also been argued that they present mechanical challenges (i.e., high toughness) for hominins with bunodont dentition. Here, we compare the nutritional and mechanical properties of grass leaves with the plants growing alongside them in African savanna habitats. We also compare grass leaves to the leaves consumed by other hominoids and demonstrate that many, though by no means all, compare favorably with the nutritional and mechanical properties of known primate foods. Our data reveal that grass leaves exhibit tremendous variation and suggest that future reconstructions of hominin dietary ecology take a more nuanced approach when considering grass leaves as a potential hominin dietary resource. Copyright © 2017. Published by Elsevier Ltd.

Underground anemotactic orientation in leaf-cutting ants: perception of airflow and experience-dependent choice of airflow direction during digging

Science.gov (United States)

Halboth, Florian; Roces, Flavio

2017-10-01

Air exchange between the large nests of Atta vollenweideri leaf-cutting ants and the environment strongly relies on a passive, wind-induced ventilation mechanism. Air moves through nest tunnels and airflow direction depends on the location of the tunnel openings on the nest mound. We hypothesized that ants might use the direction of airflow along nest tunnels as orientation cue in the context of climate control, as digging workers might prefer to broaden or to close tunnels with inflowing or outflowing air in order to regulate nest ventilation. To investigate anemotactic orientation in Atta vollenweideri, we first tested the ants' ability to perceive air movements by confronting single workers with airflow stimuli in the range 0 to 20 cm/s. Workers responded to airflow velocities ≥ 2 cm/s, and the number of ants reacting to the stimulus increased with increasing airflow speed. Second, we asked whether digging workers use airflow direction as an orientation cue. Workers were exposed to either inflow or outflow of air while digging in the nest and could subsequently choose between two digging sites providing either inflow or outflow of air, respectively. Workers significantly chose the side with the same airflow direction they experienced before. When no airflow was present during initial digging, workers showed no preference for airflow directions. Workers developed preferences for airflow direction only after previous exposure to a given airflow direction. We suggest that experience-modified anemotaxis might help leaf-cutting ants spatially organize their digging activity inside the nest during tasks related to climate control.

Cutting tool for removing materials from well bore

International Nuclear Information System (INIS)

Lynde, G.D.; Harvey, H.H. Jr.

1991-01-01

This patent describes a cutting tool adapted to be positioned downhole in a well bore for removing a metal member from the well bore; a tool body adapted to be received within said well bore and to be supported at its upper end for rotation about a longitudinal axis; blades at spaced intervals on the body and extending outwardly therefrom, each of the blades having a base with a leading surface relative to the direction of rotation; closely spaced cutting elements of hard cutting material secured to said leading surface of the base in a plurality of transversely extending rows, each cutting element being of a predetermined size and shape and arranged in a predetermined generally symmetrical pattern on the base relative to the other elements, each of said cutting elements having an exposed from cutting face forming a cutting surface, a rear face secured to the leading surface of said base, a peripheral surface extending between said faces, and a relatively sharp edge formed at the juncture of the front face and peripheral surface; the front cutting face of each cutting element being arranged and constructed for directing an extending end portion of a turning cut form said member to effect a breaking of said turning from the member being cut in a predetermined manner to minimize interesting of the turning

Designing for hot-blade cutting

DEFF Research Database (Denmark)

Brander, David; Bærentzen, Jakob Andreas; Clausen, Kenn

2016-01-01

In this paper we present a novel method for the generation of doubly-curved, architectural design surfaces using swept Euler elastica and cubic splines. The method enables a direct design to production workflow with robotic hot-blade cutting, a novel robotic fabrication method under development......-trivial constraints of blade-cutting in a bottom-up fashion, enabling an exploration of the unique architectural potential of this fabrication approach. The method is implemented as prototype design tools in MatLAB, C++, GhPython, and Python and demonstrated through cutting of expanded polystyrene foam design...

Analyzing rasters, vectors and time series using new Python interfaces in GRASS GIS 7

Science.gov (United States)

Petras, Vaclav; Petrasova, Anna; Chemin, Yann; Zambelli, Pietro; Landa, Martin; Gebbert, Sören; Neteler, Markus; Löwe, Peter

2015-04-01

GRASS GIS 7 is a free and open source GIS software developed and used by many scientists (Neteler et al., 2012). While some users of GRASS GIS prefer its graphical user interface, significant part of the scientific community takes advantage of various scripting and programing interfaces offered by GRASS GIS to develop new models and algorithms. Here we will present different interfaces added to GRASS GIS 7 and available in Python, a popular programming language and environment in geosciences. These Python interfaces are designed to satisfy the needs of scientists and programmers under various circumstances. PyGRASS (Zambelli et al., 2013) is a new object-oriented interface to GRASS GIS modules and libraries. The GRASS GIS libraries are implemented in C to ensure maximum performance and the PyGRASS interface provides an intuitive, pythonic access to their functionality. GRASS GIS Python scripting library is another way of accessing GRASS GIS modules. It combines the simplicity of Bash and the efficiency of the Python syntax. When full access to all low-level and advanced functions and structures from GRASS GIS library is required, Python programmers can use an interface based on the Python ctypes package. Ctypes interface provides complete, direct access to all functionality as it would be available to C programmers. GRASS GIS provides specialized Python library for managing and analyzing spatio-temporal data (Gebbert and Pebesma, 2014). The temporal library introduces space time datasets representing time series of raster, 3D raster or vector maps and allows users to combine various spatio-temporal operations including queries, aggregation, sampling or the analysis of spatio-temporal topology. We will also discuss the advantages of implementing scientific algorithm as a GRASS GIS module and we will show how to write such module in Python. To facilitate the development of the module, GRASS GIS provides a Python library for testing (Petras and Gebbert, 2014) which

Antimicrobial packaging for fresh-cut fruits

Science.gov (United States)

Fresh-cut fruits are minimally processed produce which are consumed directly at their fresh stage without any further kill step. Microbiological quality and safety are major challenges to fresh-cut fruits. Antimicrobial packaging is one of the innovative food packaging systems that is able to kill o...

Ruminal production of methane ''in vitro'' with Coast Cross No. 1 bermuda grass (Cynodon dactylon)

Energy Technology Data Exchange (ETDEWEB)

Geerken, C M; Funes, F; Gonzalez, R

1980-11-01

1. Samples of Coast Cross No. 1 bermuda grass (Cynodon dactylon) of 3, 6, 9, 12 and 15 days of cut, irrigated and fertilized at a rate of 400 kg N/ha/year, were used to determine their bromatological composition, digestibility and methane production ''in vitro''. 2. Crude protein concentration of the pasture fell sharply from 20 to 4% and crude fibre increased from 26 to 34% as the pasture grew older. DM digestibility decreased from 58 to 44% from the 6th to the 15th week of cut. Methane production ''in vitro'' was significantly lower (P is less than 0,01), at 3 and 6 weeks, than that obtained at older ages. The differences were more marked when calculated per unit of digested DM. 3. These results could be of interest in the search of a better utilization of dietary energy for grazing animals. (Refs. 16).

Herbaceous Legume Encroachment Reduces Grass Productivity and Density in Arid Rangelands.

Directory of Open Access Journals (Sweden)

Thomas C Wagner

Full Text Available Worldwide savannas and arid grasslands are mainly used for livestock grazing, providing livelihood to over a billion people. While normally dominated by perennial C4 grasses, these rangelands are increasingly affected by the massive spread of native, mainly woody legumes. The consequences are often a repression of grass cover and productivity, leading to a reduced carrying capacity. While such encroachment by woody plants has been extensively researched, studies on similar processes involving herbaceous species are rare. We studied the impact of a sustained and massive spread of the native herbaceous legume Crotalaria podocarpa in Namibia's escarpment region on the locally dominant fodder grasses Stipagrostis ciliata and Stipagrostis uniplumis. We measured tussock densities, biomass production of individual tussocks and tussock dormancy state of Stipagrostis on ten 10 m x 10 m plots affected and ten similarly-sized plots unaffected by C. podocarpa over eight consecutive years and under different seasonal rainfalls and estimated the potential relative productivity of the land. We found the percentage of active Stipagrostis tussocks and the biomass production of individual tussocks to increase asymptotically with higher seasonal rainfall reaching a maximum around 300 mm while the land's relative productivity under average local rainfall conditions reached only 40% of its potential. Crotalaria podocarpa encroachment had no effect on the proportion of productive grass tussocks, but reduced he productivity of individual Stipagrostis tussocks by a third. This effect of C. podocarpa on grass productivity was immediate and direct and was not compensated for by above-average rainfall. Besides this immediate effect, over time, the density of grass tussocks declined by more than 50% in areas encroached by C. podocarpa further and lastingly reducing the lands carrying capacity. The effects of C. podocarpa on grass productivity hereby resemble those of woody

EFFECT OF MULCH AND MIXED CROPPING GRASS - LEGUME AT SALINE SOIL ON GROWTH, FORAGE YIELD AND NUTRITIONAL QUALITY OF GUINEA GRASS

Directory of Open Access Journals (Sweden)

F. Kusmiyati

2014-10-01

Full Text Available The research was conducted to evaluate the effect of mulch and mixed cropping grass – legume atsaline soil on growth, forage yield and nutritional quality of guinea grass. Saline soil used in thisresearch was classified into strongly saline soil with low soil fertility. The research was arrranged inrandomized complete block design with 3 blocks. The treatments were : M1 = guinea grassmonoculture, without mulch; M2 = guinea grass monoculture, 3 ton/ha mulch; M3 = guinea grassmonoculture, 6 ton/ha mulch, M4 = mixed cropping grass with Sesbania grandiflora, without mulch;M5 = mixed cropping grass with Sesbania grandiflora, 3 ton/ha mulch; M6 = mixed cropping grass withSesbania grandiflora, 6 ton/ha mulch. Data were analyzed using analysis of variance, then followed byDuncan's Multiple Range Test. The highest soil moisture content was achieved at mixed cropping grasslegumewith 6 ton/ha of mulch. The effect of mulch at saline soil significantly increased plant growth,forage yield and nutritional quality of guinea grass. Application of 3 ton/ha mulch increased plantgrowth, forage yield and nutritional quality of guinea grass. Plant growth, forage yield and nutritionalquality of guinea grass were not affected by monoculture or mixed cropping with Sesbania at saline soil.

Optimizing reed canary grass cropping to increase profitability. Field studies of plant varieties, intercropping with legumes and barley, fertilization and soil compaction; Optimering av odlingsaatgaerder i roerflen foer oekad loensamhet. Faeltstudier av sorter, samodling med baljvaexter och korn, goedsling samt markpackning

Energy Technology Data Exchange (ETDEWEB)

Palmborg, Cecilia; Lindvall, Eva (Swedish Univ. of Agricultural Sciences, Umeaa (Sweden). Agricultural Research for Northern Sweden)

2010-05-15

Reed Canary Grass is a promising crop for biofuel production. For reed canary grass the first year is an establishment year when the small biomass is not harvested. The second year the biomass is usually cut in late autumn but the harvest (removal of the biomass from the field) is delayed until spring. This technique has resulted in lower costs and increases in fuel quality through lower ash contents, including lower contents of chlorine, sodium and potassium. However costs for production are still high, especially establishment costs, fertilization costs and harvesting costs. The aim of this project was to test ways to cut costs per MWh by increased yields, and decreased establishment costs. The methods used have been variety trials to develop more productive plant material, intercropping with nitrogen fixing legumes to reduce the nitrogen demand of the crop, fertilization with waste material (sewage sludge, reed canary grass ash or poultry manure) and harvest at frozen ground as a strategy to reduce soil compaction and harvest damages on the crop. Reed canary grass grown as a fuel has so far been grown as a mono culture. However, when it is been grown for forage, or as a biogas crop, intercropping with legumes has been successful in some studies. In addition to NPK-fertilizers sewage sludge, ash from combustion of reed canary grass and poultry manure was used. An economic calculation showed that the establishment costs (the first two growing seasons) can be lowered by intercropping with red clover. However it is also involves more risks, related to weeds, and cannot be recommended on fallow soil with a large seed bank of weeds. A ten year old reed canary grass ley was used for the experiment. Two 25 m wide strips were harvested with a mower on November 19 2008 when the top soil was frozen. The harvested material was chopped and removed from the field the following day. The following spring, May 19 2009, the remaining reed canary grass on the field was cut with a

Evaluating grasses as a long-term energy resource

Energy Technology Data Exchange (ETDEWEB)

Christian, D.G.; Riche, A.B.

2001-07-01

The work reported here is part of an ongoing project that aims to evaluate the yields of three perennial rhizomatous grasses and determine their suitability as bio-energy crops. The work began in 1993, and the grasses have been monitored continuously since that time. This report covers the period 1999/2000, and includes: the performance of plots of the energy grasses Miscanthus grass, switchgrass and reed canary grass seven years after they were planted; assessment of the yield of 15 genotypes of Miscanthus planted in 1997; monitoring all the species throughout the growing period for the presence of pests, weeds and diseases; measurement of the amount of nitrate leached from below Miscanthus grass; investigating the occurrence of lodging in switchgrass. (Author)

Kinematics of the AM-50 heading machine cutting head

Energy Technology Data Exchange (ETDEWEB)

Sikora, W; Bak, K; Klich, R [Politechnika Slaska, Gliwice (Poland). Instytut Mechanizacji Gornictwa

1987-01-01

Analyzes motion of the cutter head of the AM-50 heading machine. Two types of head motion are comparatively evaluated: planar motion and spatial motion. The spatial motion consists of the head rotational motion and horizontal or vertical feed motion, while planar motion consists of rotational motion and vertical feed motion. Equations that describe head motion under conditions of cutter vertical or horizontal feed motion are derived. The angle between the cutting speed direction and working speed direction is defined. On the basis of these formulae variations of cutting speed depending on the cutting tool position on a cutter head are calculated. Calculations made for 2 extreme cutting tools show that the cutting speed ranges from 1,205 m/s to 3,512 m/s. 4 refs.

Genetic compatibility determines endophyte-grass combinations.

Directory of Open Access Journals (Sweden)

Kari Saikkonen

Full Text Available Even highly mutually beneficial microbial-plant interactions, such as mycorrhizal- and rhizobial-plant exchanges, involve selfishness, cheating and power-struggles between the partners, which depending on prevailing selective pressures, lead to a continuum of interactions from antagonistic to mutualistic. Using manipulated grass-endophyte combinations in a five year common garden experiment, we show that grass genotypes and genetic mismatches constrain genetic combinations between the vertically (via host seeds transmitted endophytes and the out-crossing host, thereby reducing infections in established grass populations. Infections were lost in both grass tillers and seedlings in F(1 and F(2 generations, respectively. Experimental plants were collected as seeds from two different environments, i.e., meadows and nearby riverbanks. Endophyte-related benefits to the host included an increased number of inflorescences, but only in meadow plants and not until the last growing season of the experiment. Our results illustrate the importance of genetic host specificity and trans-generational maternal effects on the genetic structure of a host population, which act as destabilizing forces in endophyte-grass symbioses. We propose that (1 genetic mismatches may act as a buffering mechanism against highly competitive endophyte-grass genotype combinations threatening the biodiversity of grassland communities and (2 these mismatches should be acknowledged, particularly in breeding programmes aimed at harnessing systemic and heritable endophytes to improve the agriculturally valuable characteristics of cultivars.

Lead-210 and polonium-210 in grass

Energy Technology Data Exchange (ETDEWEB)

Hill, C R

1960-07-16

It appears that an important contribution to the observed ..cap alpha..-activity of grass may be provided by a process of natural fall-out in which lead-210 resulting from decay of atmospheric radon, together with a fraction of the equilibrium amount of its descendant polonium-210 are deposited by rainfall directly on to foliage. Metabolic uptake of part of this activity by sheep is indicated by the presence in the kidney of polonium-210. 6 references, 1 figure, 2 tables.

Preliminary Results of Clover and Grass Coverage and Total Dry Matter Estimation in Clover-Grass Crops Using Image Analysis

Directory of Open Access Journals (Sweden)

Anders K. Mortensen

2017-12-01

Full Text Available The clover-grass ratio is an important factor in composing feed ratios for livestock. Cameras in the field allow the user to estimate the clover-grass ratio using image analysis; however, current methods assume the total dry matter is known. This paper presents the preliminary results of an image analysis method for non-destructively estimating the total dry matter of clover-grass. The presented method includes three steps: (1 classification of image illumination using a histogram of the difference in excess green and excess red; (2 segmentation of clover and grass using edge detection and morphology; and (3 estimation of total dry matter using grass coverage derived from the segmentation and climate parameters. The method was developed and evaluated on images captured in a clover-grass plot experiment during the spring growing season. The preliminary results are promising and show a high correlation between the image-based total dry matter estimate and the harvested dry matter ( R 2 = 0.93 with an RMSE of 210 kg ha − 1 .

Aqueous cutting fluid for machining fissionable materials

Science.gov (United States)

Duerksen, Walter K.; Googin, John M.; Napier, Jr., Bradley

1984-01-01

The present invention is directed to a cutting fluid for machining fissionable material. The cutting fluid is formed of glycol, water and boron compound in an adequate concentration for effective neutron attenuation so as to inhibit criticality incidents during machining.

Dimensional accuracy of internal cooling channel made by selective laser melting (SLM And direct metal laser sintering (DMLS processes in fabrication of internally cooled cutting tools

Directory of Open Access Journals (Sweden)

Ghani S. A. C.

2017-01-01

Full Text Available Selective laser melting(SLM and direct metal laser sintering(DMLS are preferred additive manufacturing processes in producing complex physical products directly from CAD computer data, nowadays. The advancement of additive manufacturing promotes the design of internally cooled cutting tool for effectively used in removing generated heat in metal machining. Despite the utilisation of SLM and DMLS in a fabrication of internally cooled cutting tool, the level of accuracy of the parts produced remains uncertain. This paper aims at comparing the dimensional accuracy of SLM and DMLS in machining internally cooled cutting tool with a special focus on geometrical dimensions such as hole diameter. The surface roughness produced by the two processes are measured with contact perthometer. To achieve the objectives, geometrical dimensions of identical tool holders for internally cooled cutting tools fabricated by SLM and DMLS have been determined by using digital vernier calliper and various magnification of a portable microscope. In the current study, comparing internally cooled cutting tools made of SLM and DMLS showed that generally the higher degree of accuracy could be obtained with DMLS process. However, the observed differences in surface roughness between SLM and DMLS in this study were not significant. The most obvious finding to emerge from this study is that the additive manufacturing processes selected for fabricating the tool holders for internally cooled cutting tool in this research are capable of producing the desired internal channel shape of internally cooled cutting tool.

Influência do intervalo entre cortes sobre a produção de biomassa de duas espécies de capim limão Influence of the interval between cuts on biomass yield of two lemon grass species

Directory of Open Access Journals (Sweden)

André May

2008-09-01

Full Text Available Foi estudada a influência do intervalo entre cortes na produção de massa seca da parte aérea de duas espécies de capim limão. O experimento foi realizado no Instituto Agronômico, em Campinas-SP, 04 de junho/05 a 28 de agosto/06. O delineamento experimental utilizado foi em blocos ao acaso, com três repetições, com os tratamentos em esquema fatorial 2 x 4, sendo duas espécies (C. citratus e C. flexuosus e quatro intervalos entre cortes (40; 60; 80 e 100 dias. Para C. flexuosus, maiores intervalos entre cortes proporcionaram maior massa seca acumulada ao longo do ciclo de cultivo, partindo de 329,04 para 704,16 g planta-1 de massa seca acumulada da parte aérea, para intervalos entre cortes de 40 e 100 dias, respectivamente. A espécie C. citratus apresentou resposta linear decrescente da massa seca acumulada da parte aérea quanto maior o intervalo entre cortes utilizado, produzindo 238,68 g planta-1 utilizando intervalo entre cortes de 40 dias.The aim of this study was to analyze the influence of the interval between cuts on the dry mass yield of the aerial part of two lemon grass species. The experiment was conducted at Agronomical Institute (IAC, in Campinas - SP, from June 4th, 2005 through August 28th, 2006. The experiment was carried out in a completely randomized block design, with three replications, and the treatments in a 2 x 4 factorial design, corresponding two species (C. citratus and C. flexuosus and four intervals between cuts (40; 60; 80 and 100 days. For C. flexuosus, longer intervals between cuts generated more dry mass accumulated throughout the cultivation cycle, beginning on 329,04 to 704,16 g plant-1 of accumulated dry mass of the aerial part, for intervals between cuts of 40 and 100 days, respectively. The C. citratus species showed a decrease in its linear response for the accumulated dry mass of the aerial part the longer the interval between cuts was, yielding 238,68 g plant-1 for a 40 day interval between

Terpenes in lamb fat to trace animal grass feeding

Directory of Open Access Journals (Sweden)

A. Priolo

2011-03-01

Full Text Available Several efforts have been done in the last years to trace grass feeding directly in the herbivore products and different methods, based on carotenoid pigments (Priolo et al., 2002; Prache et al., 2003 have been proposed. Some volatile compounds, such as 2,3-octanedione or 3-methylindole (skatole have been indicated as excellent indicators of pasture diets (Young et al., 1997...

Preliminary analysis on mowing and harvesting grass along riverbanks for the supply of anaerobic digestion plants in north-eastern Italy

Directory of Open Access Journals (Sweden)

Davide Boscaro

2015-10-01

Full Text Available The increasing demand of vegetal biomass for biogas production is causing competition with food production. To reduce this problem and to provide new opportunities it is necessary to take into consideration different kinds of vegetable biomass that are more sustainable. Grass from the maintenance of non-cultivated areas such as riverbanks has not yet been fully studied as a potential biomass for biogas production. Although grass has lower methane potential, it could be interesting because it does not compete with food production. However, there is a lack of appropriate technologies and working system adapted to these areas. In this paper, different systems that could be available for the mowing and harvesting of grass along riverbanks have been preliminarily assessed through the evaluation of the field capacity, labour requirement, economic and energy aspects. The splitting of the cutting and harvesting phases into operations with different machinery seems to be the best system for handling this biomass. However, these solutions have to take into consideration the presence of obstacles or accessibility problems in the harvesting areas that could limit the operational feasibility and subsequent correct sizing.

Grass Biomethane for Agriculture and Energy

DEFF Research Database (Denmark)

Korres, N.E.; Thamsiriroj, T.; Smith, B.

2011-01-01

have advanced the role of grassland as a renewable source of energy in grass biomethane production with various environmental and socio-economic benefits. It is underlined that the essential question whether the gaseous biofuel meets the EU sustainability criteria of 60% greenhouse gas emission savings...... by 2020 can be met since savings up to 89.4% under various scenarios can be achieved. Grass biomethane production compared to other liquid biofuels either when these are produced by indigenous of imported feedstocks is very promising. Grass biomethane, given the mature and well known technology...

Determining the regional potential for a grass biomethane industry

International Nuclear Information System (INIS)

Smyth, Beatrice M.; Smyth, Henry; Murphy, Jerry D.

2011-01-01

Research highlights: → We identified assessment criteria for determining the regional potential for grass biomethane. → Grass biomethane is distributed via the natural gas grid. → The criteria include: land use; grass yields; gas grid coverage; availability of co-substrates. → The county with the highest potential can fuel 50% of cars or supply 130% of domestic gas consumption. - Abstract: Grass biogas/biomethane has been put forward as a renewable energy solution and it has been shown to perform well in terms of energy balance, greenhouse gas emissions and policy constraints. Biofuel and energy crop solutions are country-specific and grass biomethane has strong potential in countries with temperate climates and a high proportion of grassland, such as Ireland. For a grass biomethane industry to develop in a country, suitable regions (i.e. those with the highest potential) must be identified. In this paper, factors specifically related to the assessment of the potential of a grass biogas/biomethane industry are identified and analysed. The potential for grass biogas and grass biomethane is determined on a county-by-county basis using multi-criteria decision analysis. Values are assigned to each county and ratings and weightings applied to determine the overall county potential. The potential for grass biomethane with co-digestion of slaughter waste (belly grass) is also determined. The county with the highest potential (Limerick) is analysed in detail and is shown to have ready potential for production of gaseous biofuel to meet either 50% of the vehicle fleet or 130% of the domestic natural gas demand, through 25 facilities at a scale of ca. 30 kt yr -1 of feedstock. The assessment factors developed in this paper can be used in other resource studies into grass biomethane or other energy crops.

Non-linear partial least square regression increases the estimation accuracy of grass nitrogen and phosphorus using in situ hyperspectral and environmental data

NARCIS (Netherlands)

Ramoelo, A.; Skidmore, A.K.; Cho, M.A.; Mathieu, R.; Heitkonig, I.M.A.; Dudeni-Tlhone, N.; Schlerf, M.; Prins, H.H.T.

2013-01-01

Grass nitrogen (N) and phosphorus (P) concentrations are direct indicators of rangeland quality and provide imperative information for sound management of wildlife and livestock. It is challenging to estimate grass N and P concentrations using remote sensing in the savanna ecosystems. These areas

kW-class direct diode laser for sheet metal cutting based on commercial pump modules

Science.gov (United States)

Witte, U.; Schneider, F.; Holly, C.; Di Meo, A.; Rubel, D.; Boergmann, F.; Traub, M.; Hoffmann, D.; Drovs, S.; Brand, T.; Unger, A.

2017-02-01

We present a direct diode laser with an optical output power of more than 800 W ex 100 μm with an NA of 0.17. The system is based on 6 commercial pump modules that are wavelength stabilized by use of VBGs. Dielectric filters are used for coarse and dense wavelength multiplexing. Metal sheet cutting tests were performed in order to prove system performance and reliability. Based on a detailed analysis of loss mechanisms, we show that the design can be easily scaled to output powers in the range of 2 kW and to an optical efficiency of 80%.

Post-treatment efficacy of discontinuous treatment with 300IR 5-grass pollen sublingual tablet in adults with grass pollen-induced allergic rhinoconjunctivitis

DEFF Research Database (Denmark)

Didier, A; Malling, H-J; Worm, Marcel

2013-01-01

Sustained efficacy over three pollen seasons of pre- and co-seasonal treatment with 300IR 5-grass pollen sublingual tablet has been demonstrated in adults with moderate-severe grass pollen-associated allergic rhinoconjunctivitis.......Sustained efficacy over three pollen seasons of pre- and co-seasonal treatment with 300IR 5-grass pollen sublingual tablet has been demonstrated in adults with moderate-severe grass pollen-associated allergic rhinoconjunctivitis....

Research of a smart cutting tool based on MEMS strain gauge

Science.gov (United States)

Zhao, Y.; Zhao, Y. L.; Shao, YW; Hu, T. J.; Zhang, Q.; Ge, X. H.

2018-03-01

Cutting force is an important factor that affects machining accuracy, cutting vibration and tool wear. Machining condition monitoring by cutting force measurement is a key technology for intelligent manufacture. Current cutting force sensors exist problems of large volume, complex structure and poor compatibility in practical application, for these problems, a smart cutting tool is proposed in this paper for cutting force measurement. Commercial MEMS (Micro-Electro-Mechanical System) strain gauges with high sensitivity and small size are adopted as transducing element of the smart tool, and a structure optimized cutting tool is fabricated for MEMS strain gauge bonding. Static calibration results show that the developed smart cutting tool is able to measure cutting forces in both X and Y directions, and the cross-interference error is within 3%. Its general accuracy is 3.35% and 3.27% in X and Y directions, and sensitivity is 0.1 mV/N, which is very suitable for measuring small cutting forces in high speed and precision machining. The smart cutting tool is portable and reliable for practical application in CNC machine tool.

Baikov-Lee representations of cut Feynman integrals

International Nuclear Information System (INIS)

Harley, Mark; Moriello, Francesco; Schabinger, Robert M.

2017-01-01

We develop a general framework for the evaluation of d-dimensional cut Feynman integrals based on the Baikov-Lee representation of purely-virtual Feynman integrals. We implement the generalized Cutkosky cutting rule using Cauchy’s residue theorem and identify a set of constraints which determine the integration domain. The method applies equally well to Feynman integrals with a unitarity cut in a single kinematic channel and to maximally-cut Feynman integrals. Our cut Baikov-Lee representation reproduces the expected relation between cuts and discontinuities in a given kinematic channel and furthermore makes the dependence on the kinematic variables manifest from the beginning. By combining the Baikov-Lee representation of maximally-cut Feynman integrals and the properties of periods of algebraic curves, we are able to obtain complete solution sets for the homogeneous differential equations satisfied by Feynman integrals which go beyond multiple polylogarithms. We apply our formalism to the direct evaluation of a number of interesting cut Feynman integrals.

Grasses for energy production: hydrological guidelines

Energy Technology Data Exchange (ETDEWEB)

Hall, R.L.

2003-07-01

This report provides hydrological guidelines for growers, land and water resource managers, environmental groups and other parties interested in utilising grasses for energy production. The aim of the report is to help interested parties decide if a location is suitable for planting energy grasses by considering whether potential hydrological impacts will have an adverse effect on crop productivity and yield. The guidelines consider: the water use of energy grasses compared with other crops; the factors governing water use; the water requirements for a productive crop; and the likely impacts on the availability and quantity of water. The report points out that there are still gaps in our knowledge of the processes controlling the water use and growth of energy grasses and notes that, in some situations, there will be considerable uncertainty in predictions of water use and the magnitude of the associated hydrological impacts.

Study on Crystallographic Orientation Effect on Surface Generation of Aluminum in Nano-cutting.

Science.gov (United States)

Xu, Feifei; Fang, Fengzhou; Zhu, Yuanqing; Zhang, Xiaodong

2017-12-01

The material characteristics such as size effect are one of the most important factors that could not be neglected in cutting the material at nanoscale. The effects of anisotropic nature of single crystal materials in nano-cutting are investigated employing the molecular dynamics simulation. Results show that the size effect of the plastic deformation is based on different plastic carriers, such as the twin, stacking faults, and dislocations. The minimum uncut chip thickness is dependent on cutting direction, where even a negative value is obtained when the cutting direction is {110}. It also determines the material deformation and removal mechanism (e.g., shearing, extruding, and rubbing mechanism) with a decrease in uncut chip thickness. When material is deformed by shearing, the primary shearing zone expands from the stagnation point or the tip of stagnation zone. When a material is deformed by extruding and rubbing, the primary deformation zone almost parallels to the cutting direction and expands from the bottom of the cutting edge merging with the tertiary deformation zone. The generated surface quality relates to the crystallographic orientation and the minimum uncut chip thickness. The cutting directions of {110}, {110}, and {111}, whose minimum uncut chip thickness is relatively small, have better surface qualities compared to the other cutting direction.

Influence of cutting parameters on the depth of subsurface deformed layer in nano-cutting process of single crystal copper.

Science.gov (United States)

Wang, Quanlong; Bai, Qingshun; Chen, Jiaxuan; Su, Hao; Wang, Zhiguo; Xie, Wenkun

2015-12-01

Large-scale molecular dynamics simulation is performed to study the nano-cutting process of single crystal copper realized by single-point diamond cutting tool in this paper. The centro-symmetry parameter is adopted to characterize the subsurface deformed layers and the distribution and evolution of the subsurface defect structures. Three-dimensional visualization and measurement technology are used to measure the depth of the subsurface deformed layers. The influence of cutting speed, cutting depth, cutting direction, and crystallographic orientation on the depth of subsurface deformed layers is systematically investigated. The results show that a lot of defect structures are formed in the subsurface of workpiece during nano-cutting process, for instance, stair-rod dislocations, stacking fault tetrahedron, atomic clusters, vacancy defects, point defects. In the process of nano-cutting, the depth of subsurface deformed layers increases with the cutting distance at the beginning, then decreases at stable cutting process, and basically remains unchanged when the cutting distance reaches up to 24 nm. The depth of subsurface deformed layers decreases with the increase in cutting speed between 50 and 300 m/s. The depth of subsurface deformed layer increases with cutting depth, proportionally, and basically remains unchanged when the cutting depth reaches over 6 nm.

Effect of Trinexapac-Ethyl and Traffic Stress on Physiological and Morphological Characteristics of Wheat Grass(Agropyron desertorum

Directory of Open Access Journals (Sweden)

M. H. Sheikh Mohamadi

2015-06-01

Full Text Available In order to evaluate the effect of trinexapac ethyl concentrations (0, 250 and 500 g/h and traffic stress (traffic and non traffic treatments on wheat grass physiological and morphological traits, an experiment was conducted on research farm of Isfahan University of Technology in 2011 - 2012 as factorial in completely randomized designs with three replications. The studied traits involved plant height and plant density, shoot dry weight and fresh weights, tillering, chlorophyll level, roots and shoot dissolved carbohydrates. Results showed that Trinexapac ethyl reduced plant height, fresh weight and dry weight of cut parts significantly. Application of 250 and 500 g/h Trinexapac ethyl decreased plant height by 21.23 percent and 31.85 percent respectively. Application of Trinexapac ethyl improved plant height, tillering and chlorophyll level. In contrast, chlorophyll level was decreased substantially under traffic treatment and this treatment did not affect wheat grass density and tillering significantly. Under 500 g/h Trinexapac ethyl treatment, tillering was increased by 36 percent compared with under control condition one. Results showed that Trinexapac ethyl application and traffic increased dissolved carbohydrates of root and shoot significantly. As a result, it was found that wheat grass is a traffic resistant plant and it seems that the use of Trinexapac ethyl increases plant resistance to traffic stress

Effects of grazing strategy on limiting nitrate leaching in grazed grass-clover pastures on coarse sandy soil

DEFF Research Database (Denmark)

Hansen, Elly Møller; Eriksen, Jørgen; Søegaard, Karen

2012-01-01

-term mean. The experiment was initiated in a 4-yr-old grass-clover sward in south Denmark. Three treatments were as follows grazing only (G), spring cut followed by grazing (CG) and both spring and autumn cuts with summer grazing (CGC). Nitrate leaching was calculated by extracting water isolates from 80 cm......Urinations of ruminants on grazed pastures increase the risk of nitrate leaching. The study investigated the effect of reducing the length of the grazing season on nitrate leaching from a coarse sandy, irrigated soil during 2006–2007 and 2007–2008. In both years, precipitation was above the long...... depth using ceramic suction cups. Because of considerable variation in measured nitrate concentrations, the 32 installed suction cups per treatment were insufficient to reveal differences between treatments. However, weighted nitrate leaching estimations for G, CG and CGC showed estimated mean nitrate N...

Chemical composition and methane yield of reed canary grass as influenced by harvesting time and harvest frequency

DEFF Research Database (Denmark)

Kandel, Tanka Prasad; Sutaryo, Sutaryo; Møller, Henrik Bjarne

2013-01-01

This study examined the influence of harvest time on biomass yield, dry matter partitioning, biochemical composition and biological methane potential of reed canary grass harvested twice a month in one-cut (OC) management. The regrowth of biomass harvested in summer was also harvested in autumn...... as a two-cut management with (TC-F) or without (TC-U) fertilization after summer harvest. The specific methane yields decreased significantly with crop maturity that ranged from 384 to 315 and from 412 to 283 NL (normal litre) (kg VS)-1 for leaf and stem, respectively. Approximately 45% more methane...... was produced by the TC-F management (5430 Nm3 ha-1) as by the OC management (3735 Nm3 ha-1). Specific methane yield was moderately correlated with the concentrations of fibre components in the biomass. Larger quantity of biogas produced at the beginning of the biogas assay from early harvested biomass...

Invasion of non-native grasses causes a drop in soil carbon storage in California grasslands

Energy Technology Data Exchange (ETDEWEB)

Koteen, Laura E; Harte, John [Energy and Resources Group, 310 Barrows Hall, University of California, Berkeley, CA 94720 (United States); Baldocchi, Dennis D, E-mail: lkoteen@berkeley.edu [Department of Environmental Science, Policy and Management, 137 Mulford Hall, University of California, Berkeley, CA 94720 (United States)

2011-10-15

Vegetation change can affect the magnitude and direction of global climate change via its effect on carbon cycling among plants, the soil and the atmosphere. The invasion of non-native plants is a major cause of land cover change, of biodiversity loss, and of other changes in ecosystem structure and function. In California, annual grasses from Mediterranean Europe have nearly displaced native perennial grasses across the coastal hillsides and terraces of the state. Our study examines the impact of this invasion on carbon cycling and storage at two sites in northern coastal California. The results suggest that annual grass invasion has caused an average drop in soil carbon storage of 40 Mg/ha in the top half meter of soil, although additional mechanisms may also contribute to soil carbon losses. We attribute the reduction in soil carbon storage to low rates of net primary production in non-native annuals relative to perennial grasses, a shift in rooting depth and water use to primarily shallow sources, and soil respiratory losses in non-native grass soils that exceed production rates. These results indicate that even seemingly subtle land cover changes can significantly impact ecosystem functions in general, and carbon storage in particular.

Invasion of non-native grasses causes a drop in soil carbon storage in California grasslands

International Nuclear Information System (INIS)

Koteen, Laura E; Harte, John; Baldocchi, Dennis D

2011-01-01

Vegetation change can affect the magnitude and direction of global climate change via its effect on carbon cycling among plants, the soil and the atmosphere. The invasion of non-native plants is a major cause of land cover change, of biodiversity loss, and of other changes in ecosystem structure and function. In California, annual grasses from Mediterranean Europe have nearly displaced native perennial grasses across the coastal hillsides and terraces of the state. Our study examines the impact of this invasion on carbon cycling and storage at two sites in northern coastal California. The results suggest that annual grass invasion has caused an average drop in soil carbon storage of 40 Mg/ha in the top half meter of soil, although additional mechanisms may also contribute to soil carbon losses. We attribute the reduction in soil carbon storage to low rates of net primary production in non-native annuals relative to perennial grasses, a shift in rooting depth and water use to primarily shallow sources, and soil respiratory losses in non-native grass soils that exceed production rates. These results indicate that even seemingly subtle land cover changes can significantly impact ecosystem functions in general, and carbon storage in particular.

Invasion of non-native grasses causes a drop in soil carbon storage in California grasslands

Science.gov (United States)

Koteen, Laura E.; Baldocchi, Dennis D.; Harte, John

2011-10-01

Vegetation change can affect the magnitude and direction of global climate change via its effect on carbon cycling among plants, the soil and the atmosphere. The invasion of non-native plants is a major cause of land cover change, of biodiversity loss, and of other changes in ecosystem structure and function. In California, annual grasses from Mediterranean Europe have nearly displaced native perennial grasses across the coastal hillsides and terraces of the state. Our study examines the impact of this invasion on carbon cycling and storage at two sites in northern coastal California. The results suggest that annual grass invasion has caused an average drop in soil carbon storage of 40 Mg/ha in the top half meter of soil, although additional mechanisms may also contribute to soil carbon losses. We attribute the reduction in soil carbon storage to low rates of net primary production in non-native annuals relative to perennial grasses, a shift in rooting depth and water use to primarily shallow sources, and soil respiratory losses in non-native grass soils that exceed production rates. These results indicate that even seemingly subtle land cover changes can significantly impact ecosystem functions in general, and carbon storage in particular.

Treatment of petroleum drill cuttings using bioaugmentation and biostimulation supplemented with phytoremediation.

Science.gov (United States)

Kogbara, Reginald B; Ogar, Innocent; Okparanma, Reuben N; Ayotamuno, Josiah M

2016-07-28

This study sought to compare the effectiveness of bioaugmentation and biostimulation, as well as the combination of both techniques, supplemented with phytoremediation, in the decontamination of petroleum drill cuttings. Drill cuttings with relatively low concentration of total petroleum hydrocarbons (TPH) and metals were mixed with soil in the ratio 5:1 and treated with three different combinations of the bioremediation options. Option A entailed bioaugmentation supplemented with phytoremediation. Option B had the combination of biostimulation and bioaugmentation supplemented with phytoremediation. While biostimulation supplemented with phytoremediation was deployed in option C. Option O containing the drill cuttings-soil mixture without treatment served as untreated control. Fertilizer application, tillage and watering were used for biostimulation treatment, while spent mushroom substrate (Pleurotus ostreatus) and elephant grass (Pennisetum purpureum) were employed for bioaugmentation and phytoremediation treatment, respectively. The drill cuttings-soil mixtures were monitored for TPH, organic carbon, total nitrogen, pH, metal concentrations, and fungal counts, over time. After 56 days of treatment, there was a decline in the initial TPH concentration of 4,114 mg kg(-1) by 5.5%, 68.3%, 75.6% and 48% in options O, A, B and C, respectively. Generally, higher TPH loss resulted from the phytoremediation treatment stage. The treated options also showed slight reductions in metal concentrations ranging from 0% to 16% of the initial low concentrations. The results highlight the effectiveness of bioaugmentation supplemented with phytoremediation. The combination of bioaugmentation and biostimulation supplemented with phytoremediation, however, may prove better in decontaminating petroleum drill cuttings to environmentally benign levels.

Structural Characterization of Silica Particles Extracted from Grass Stenotaphrum secundatum: Biotransformation via Annelids

Directory of Open Access Journals (Sweden)

A. Espíndola-Gonzalez

2014-01-01

Full Text Available This study shows the structural characterization of silica particles extracted from Stenotaphrum secundatum (St. Augustine grass using an annelid-based biotransformation process. This bioprocess starts when St. Augustine grass is turned into humus by vermicompost, and then goes through calcination and acid treatment to obtain silica particles. To determine the effect of the bioprocess, silica particles without biotransformation were extracted directly from the sample of grass. The characterization of the silica particles was performed using Infrared (FTIR and Raman spectroscopy, Transmission Electron Microscopy (TEM, X-ray Diffraction (XRD, Dynamic Light Scattering (DLS, and Energy Dispersion Spectroscopy (EDS. Both types of particles showed differences in morphology and size. The particles without biotransformation were essentially amorphous while those obtained via annelids showed specific crystalline phases. The biological relationship between the metabolisms of worms and microorganisms and the organic-mineral matter causes changes to the particles' properties. The results of this study are important because they will allow synthesis of silica in cheaper and more ecofriendly ways.

Parámetros indicadores de valor nutritivo en cinco pastos tropicales en la época lluviosa en el trópico seco de Cota Rica

Directory of Open Access Journals (Sweden)

Rafael Angel Arroyo

2016-03-01

Full Text Available This essay was carried out in Hojancha, Guanacaste to evaluate the nutritive values of the following grasses: jaragua (Hyparrhenia rufa (Nees, african star grass (Cynodon nlenfuensis (L(Pers, transvala (Digitaria decumbens veranero (Andropogon gayanus(Kunth y congo (Brachiaria ruziziensis(Germain et Everard, under three cut intervals (28, 35 and 42 days. The evaluated variables were: Dry Matter Production (DMP, kg/ha/cut, In vitro Dry Matter Digestibility (IVDMD, %, Digestible Dry Matter (DDM, kg/ha/cut, Crude Protein Content (CP, %, Crude protein production (CPP, kg/ha/cut, Digestible Crude Protein Production (DCPP, kg/ha/cut, Ruminal Dry Matter Disappeareance (RDMD, %/hour, Ruminal Dry Matter Disappeareance Mean Time (RDMDMT, hours. The largest DMP was found for the veranero grass at 28 and 35 day intervals (1527,5 and 2424,4 kg/ha/cut while at the 42 day interval the congo grass (2886,8 kg/ha/cut had the largest DMP, followed by veranero grass with 2705,0 kg/ha/cut. The veranero and transvala grasses showed the highest RDMD and RDMDMT as compared to the other grasses in the study, as a consequence of their better chemical composition. Between the jaragua and veranero grasses there were no differences with respect to their chemical composition and ruminal characteristics. The poorest DMP, chemical composition (excluding CP and RDMD was shown by the african star grass.

Satellite Phenology Observations Inform Peak Season of Allergenic Grass Pollen Aerobiology across Two Continents

Science.gov (United States)

Huete, A. R.; Devadas, R.; Davies, J.

2015-12-01

Pollen exposure and prevalence of allergenic diseases have increased in many parts of the world during the last 30 years, with exposure to aeroallergen grass pollen expected to intensify with climate change, raising increased concerns for allergic diseases. The primary contributing factors to higher allergenic plant species presence are thought to be climate change, land conversion, and biotic mixing of species. Conventional methods for monitoring airborne pollen are hampered by a lack of sampling sites and heavily rely on meteorology with less attention to land cover updates and monitoring of key allergenic species phenology stages. Satellite remote sensing offers an alternative method to overcome the restrictive coverage afforded by in situ pollen networks by virtue of its synoptic coverage and repeatability of measurements that enable timely updates of land cover and land use information and monitoring landscape dynamics and interactions with human activity and climate. In this study, we assessed the potential of satellite observations of urban/peri-urban environments to directly inform landscape conditions conducive to pollen emissions. We found satellite measurements of grass cover phenological evolution to be highly correlated with in situ aerobiological grass pollen concentrations in five urban centres located across two hemispheres (Australia and France). Satellite greenness data from the Moderate Resolution Imaging Spectroradiometer (MODIS) were found to be strongly synchronous with grass pollen aerobiology in both temperate grass dominated sites (France and Melbourne), as well as in Sydney, where multiple pollen peaks coincided with the presence of subtropical grasses. Employing general additive models (GAM), the satellite phenology data provided strong predictive capabilities to inform airborne pollen levels and forecast periods of grass pollen emissions at all five sites. Satellite phenology offer promising opportunities of improving public health risk

Pygrass: An Object Oriented Python Application Programming Interface (API for Geographic Resources Analysis Support System (GRASS Geographic Information System (GIS

Directory of Open Access Journals (Sweden)

Marco Ciolli

2013-03-01

Full Text Available PyGRASS is an object-oriented Python Application Programming Interface (API for Geographic Resources Analysis Support System (GRASS Geographic Information System (GIS, a powerful open source GIS widely used in academia, commercial settings and governmental agencies. We present the architecture of the PyGRASS library, covering interfaces to GRASS modules, vector and raster data, with a focus on the new capabilities that it provides to GRASS users and developers. Our design concept of the module interface allows the direct linking of inputs and outputs of GRASS modules to create process chains, including compatibility checks, process control and error handling. The module interface was designed to be easily extended to work with remote processing services (Web Processing Service (WPS, Web Service Definition Language (WSDL/Simple Object Access Protocol (SOAP. The new object-oriented Python programming API introduces an abstract layer that opens the possibility to use and access transparently the efficient raster and vector functions of GRASS that are implemented in C. The design goal was to provide an easy to use, but powerful, Python interface for users and developers who are not familiar with the programming language C and with the GRASS C-API. We demonstrate the capabilities, scalability and performance of PyGRASS with several dedicated tests and benchmarks. We compare and discuss the results of the benchmarks with dedicated C implementations.

VAM populations in relation to grass invasion associated with forest decline.

Science.gov (United States)

Vosatka, M; Cudlin, P; Mejstrik, V

1991-01-01

Spruce stands in Northern Bohemia forests, damaged to various degrees by industrial pollution, have shown establishment of grass cover following tree defoliation. Populations of vesicular-arbuscular mycorrhizal (VAM) fungi were studied under this grass cover in four permanent plots with spruce under different levels of pollution stress. Soil and root samples were collected in April and June within each plot as follows: (1) sites without grass, (2) sites with initial stages of grass invasion, and (3) sites with fully developed grass cover. In all plots, the highest number of propagules were recovered from samples taken from sites having full grass cover. Mycorrhizal infection of grass was highest in the plot with the severest pollution damage and lowest in the least damaged plot. The development of grass cover and VAM infection of grass increased with tree defoliation caused by air pollution.

Grass survey of the Itremo Massif records endemic central highland ...

African Journals Online (AJOL)

Twenty species are endemic to the central highlands, and a further 1 4 species are restricted to Madagascar. Five ecological groups of grasses were identified in the Itremo Massif: shade species in gallery forests, open wet area species, fire grasses, anthropogenic disturbance associated grasses and rock-dwelling grasses.

Rumen escape protein in grass and grass silage deterimened with a nylon bag and an enzymatic technique

NARCIS (Netherlands)

Cone, J.W.; Gelder, van A.H.; Mathijssen-Kamman, A.A.; Hindle, V.A.

2004-01-01

Rumen escape protein (REP) was determined for six grasses and 16 grass silages using a nylon bag technique and an in vitro technique using a proteolytic enzyme preparation of Streptomyces griseus. In vitro, the samples were incubated for 0, 1, 6 and 24 h. The highest correlation observed between

EroGRASS : Failure of grass cover layers at seaward and shoreward dike slopes. design, construction and performance

NARCIS (Netherlands)

Verhagen, H.J.; Verheij, H.J.; Cao, T.M.; Dassanayake, D.; Roelvink, D.; Piontkowitz, T.

2009-01-01

A large number of the dikes in the North Sea and Baltic Sea regions are covered with grass that is exposed to hydraulic loading from waves and currents during storm surges. During previous storm surges the grass cover layers often showed large strength and remained undamaged. A clear physical

Investigation of Desso GrassMaster® as application in hydraulic engineering

NARCIS (Netherlands)

Steeg, van der P.; Paulissen, M.P.C.P.; Roex, E.; Mommer, L.

2015-01-01

Dessa GrassMaster® is a reinforced grass system which is applied successfully on sports fields and enables to use a sports field more intensively than a normal grass field. In this report the possibility of an application of Dessa GrassMaster®in hydraulic conditions, with a focus on grass dikes, is

Established native perennial grasses out-compete an invasive annual grass regardless of soil water and nutrient availability

Science.gov (United States)

Christopher M. McGlone; Carolyn Hull Sieg; Thomas E. Kolb; Ty Nietupsky

2012-01-01

Competition and resource availability influence invasions into native perennial grasslands by nonnative annual grasses such as Bromus tectorum. In two greenhouse experiments we examined the influence of competition, water availability, and elevated nitrogen (N) and phosphorus (P) availability on growth and reproduction of the invasive annual grass B. tectorum and two...

Germination of Themeda triandra (Kangaroo grass) as affected by ...

African Journals Online (AJOL)

Low rainfall in range areas restricts germination, growth and development of majority of range grasses. However, germination and establishment potential of forage grasses vary and depends on environmental conditions. Themeda triandra is an excellent known grass to grow under different environmental conditions.

Effect of defoliation frequency and height of cutting on growth, dry matter yield and nutritive value of Napier grass (Pennisetum purpureum (L.) Schumach)

NARCIS (Netherlands)

Tessema, Z.K.; Mihret, J.; Solomon, M.

2010-01-01

Growth characteristics, dry-matter (DM) yield, chemical components and in vitro dry-matter digestibility (IVDMD) of Napier grass were studied in a randomized complete block design with three replications at Haramaya University, Ethiopia. The treatments were three defoliation frequencies (60, 90 and

Changing the energy climate: clean and green heat from grass biofuel pellets

International Nuclear Information System (INIS)

Jannasch, R.; Samson, R.; DeMaio, A.; Adams, T.; Ho Lem, C.

2001-01-01

Uncertain energy supplies and international agreements to reduce greenhouse gas (GHG) emissions have created unique opportunities for biofuel development. Pelleted fuels from warm season grasses such as switchgrass (Panicum virgatum) can be grown for $3-4/GigaJoule (GJ) with only minor emissions of CO 2 . Using close-coupled gasifer combustion technology, switchgrass fuel pellets emit 86%, 91%, 71% and 89% less CO 2 than electricity, heating oil, natural gas and propane, respectively. Every 100 ha of switchgrass converted into pellet form and used to displace fossil fuel for space-heating prevents the emission of 1000 tonnes of CO 2 . Heating an average Ontario house with a 90GJ heat demand costs $1213 with switchgrass pellets compared to $2234, $1664, $882 and $3251 with electricity, heating oil, natural gas and propane, respectively. An estimated 23.4 million acres of agricultural land in Canada could potentially be converted to perennial grass biofuel production. The depressed farm sector would benefit economically from energy farming. Low-grade heat energy derived from grass pellets could displace some of the 30,000 GigaWatt Hours of electricity currently used for home heating in Quebec, Ontario and Manitoba. Surplus electricity could be exported or used to replace nuclear or coal burning plants. Contrary to prevailing beliefs that reducing GHG emissions will raise societal energy costs, pelletized grass biofuels could provide consumers with less expensive and more GHG-friendly heating options than most fossil energy sources. If the political support and direction exist to implement the Kyoto Protocol as intended, grass pellets could well become a heating fuel of choice in North America. (author)

The importance of cross-reactivity in grass pollen allergy

Directory of Open Access Journals (Sweden)

Aleksić Ivana

2014-01-01

Full Text Available According to the data obtained from in vivo and in vitro testing in Serbia, a significant number of patients have allergic symptoms caused by grass pollen. We examined the protein composition of grass pollens (Dactylis glomerata, Lolium perenne and Phleum pratense and cross-reactivity in patients allergic to grass pollen from our region. The grass pollen allergen extract was characterized by SDS-PAGE, while cross-reactivity of single grass pollens was revealed by immunoblot analysis. A high degree of cross-reactivity was demonstrated for all three single pollens in the sera of allergic patients compared to the grass pollen extract mixture. Confirmation of the existence of cross-reactivity between different antigenic sources facilitates the use of monovalent vaccines, which are easier to standardize and at the same time prevent further sensitization of patients and reduces adverse reactions. [Projekat Ministarstva nauke Republike Srbije, br. 172049 i br. 172024

Thermogravimetric analysis of forest understory grasses

Science.gov (United States)

Thomas Elder; John S. Kush; Sharon M. Hermann

2011-01-01

Forest understory grasses are of significance in the initiation, establishment and maintenance of fire, whether used as a management tool or when occurring as wildfire. The fundamental thermal properties of such grasses are critical to their behavior in fire situations and have been investigated in the current work by the application of thermogravimetric analysis (TGA...

Names of Southern African grasses: Name changes and additional ...

African Journals Online (AJOL)

The main reasons for changes in botanical names are briefly reviewed, with examples from the lists. At this time, about 1040 grass species and subspecific taxa are recognized in the subcontinent. Keywords: botanical research; botanical research institute; botany; grass; grasses; identification; name change; nomenclature; ...

Plasma arc cutting: speed and cut quality

International Nuclear Information System (INIS)

Nemchinsky, V A; Severance, W S

2009-01-01

When cutting metal with plasma arc cutting, the walls of the cut are narrower at the bottom than at the top. This lack of squareness increases as the cutting speed increases. A model of this phenomenon, affecting cut quality, is suggested. A thin liquid layer, which separates the plasma from the solid metal to be melted, plays a key role in the suggested model. This layer decreases heat transfer from the plasma to the solid metal; the decrease is more pronounced the higher the speed and the thicker the liquid metal layer. Since the layer is thicker at the bottom of the cut, the heat transfer effectiveness is lower at the bottom. The decrease in heat transfer effectiveness is compensated by the narrowness of the cut. The suggested model allows one to calculate the profile of the cut. The result of the calculations of the cutting speeds for plates of various thicknesses, at which the squareness of the cut is acceptable, agrees well with the speeds recommended by manufacturers. The second effect considered in the paper is the deflection of the plasma jet from the vertical at a high cutting speed. A qualitative explanation of this phenomenon is given. We believe the considerations of this paper are pertinent to other types of cutting with moving heat sources.

Effect of naphthalene acetic acid on adventitious root development and associated physiological changes in stem cutting of Hemarthria compressa.

Directory of Open Access Journals (Sweden)

Yan-Hong Yan

Full Text Available In order to find a way to induce rooting on cuttings of Hemarthria compressa cv. Ya'an under controlled conditions, a project was carried out to study the effect of naphthalene acetic acid (NAA on rooting in stem cuttings and related physiological changes during the rooting process of Hemarthria compressa. The cuttings were treated with five concentrations of NAA (0, 100, 200 300, 400 mg/l at three soaking durations (10, 20, 30 minutes, and cuttings without treatment were considered as control. Samples were planted immediately into pots after treatment. IAA-oxidase (IAAO activity, peroxidase (POD activity and polyphenol oxidase (PPO activity were determined after planting. Results showed that NAA had positive effect on rooting at the concentration of 200 mg/l compared to other concentrations at 30 days after planting (DAP. Among the three soaking durations, 20 minutes (min of 200 mg/l NAA resulted in higher percentages of rooting, larger numbers of adventitious roots and heavier root dry weight per cutting. The lowest IAAO activity was obtained when soaked at 200 mg/l NAA for 20 min soaking duration. This was consistent with the best rooting ability, indicating that the lower IAAO activity, the higher POD activity and PPO activity could be used as an indicator of better rooting ability for whip grass cuttings and might serve as a good marker for rooting ability in cuttings.

Cutting

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Cutting KidsHealth / For Teens / Cutting What's in this article? ... Getting Help Print en español Cortarse What Is Cutting? Emma's mom first noticed the cuts when Emma ...

Bud-bank and tiller dynamics of co-occurring C3 caespitose grasses in mixed-grass prairie.

Science.gov (United States)

Ott, Jacqueline P; Hartnett, David C

2015-09-01

Tiller recruitment from the belowground bud bank of caespitose grasses influences their ability to monopolize local resources and, hence, their genet fitness. Differences in bud production and outgrowth among tiller types within a genet and among species may explain co-occurrence of caespitose grasses. This study aimed to characterize genet bud-bank and tiller production and dynamics in two co-occurring species and compare their vegetative reproductive strategies. Bud-bank and tiller dynamics of Hesperostipa comata and Nassella viridula, dominant C3 caespitose grasses in the northern mixed-grass prairie of North America, were assessed throughout an annual cycle. The two species showed similar strategies, maintaining polycyclic tillers and thus creating mixed-age genet bud banks comprising multiple bud cohorts produced in different years. Vegetative tillers produced the majority of buds, whereas flowering tillers contributed little to the bud bank. Buds lived for at least 2 yr and were maintained in multiple developmental stages throughout the year. Because bud longevity rarely exceeded tiller longevity, tiller longevity drove turnover within the bud bank. Tiller population dynamics, more than bud production per tiller, determined the differential contribution of tiller types to the bud bank. Nassella viridula had higher bud production per tiller, a consistent annual tiller recruitment density, and greater longevity of buds on senesced and flowering tillers than H. comata. Co-occurring C3 caespitose grasses had similar bud-bank and tiller dynamics contributing to genet persistence but differed in bud characteristics that could affect genet longevity and species coexistence. © 2015 Botanical Society of America.

Precision Machining When Cutting with Leading Plastic Deformation

Directory of Open Access Journals (Sweden)

N. A. Yaroslavtseva

2017-01-01

Full Text Available Keeping up the product competitiveness continually requires solving the problems of reducing time for product creation and material costs for its production and ensuring the maximum conformity of the product quality with the individual requirements of a particular consumer. It is especially difficult to implement these tasks in product manufacturing from the hard-to-machine steels and alloys with extremely low production rate in machining (often 10-20 times lower than when cutting the ordinary structural steels.Currently, one of the promising ways to improve the cutting process of hard-to-machine materials and quality of parts made from these materials is development and application of combined processing methods, which use additional energy sources to act on the machined material in the cutting zone. A BMSTU-developed cutting method with leading plastic deformation (LPD, which acts to raise the production rate, gain the cutting tool-life, reduce the surface roughness, improve the accuracy of processing and the performance characteristics of products, ensure the reliable flow chip control, and improve the labor conditions, belongs to such sort of methods.One of the most important indicators of processing quality that has a great impact on the operation and cost characteristics of the product and on the machining rate as well is the accuracy of processing. In cutting, the processing errors largely arise from the elastic deformations of a technological system when the cutting force, and, in particular, the radial component of the cutting force, acts on it.The deforming devices, used in cutting with LPD, being located as a rule, on the diametrically opposite side with respect to the cutting zone, act on the technological system as vibration dampers. In addition, as studies have shown, the choice of a rational direction for applying LPD load helps to compensate partially or completely the cutting force radial component effect on the technological

Dose-response relationship of a new Timothy grass pollen allergoid in comparison with a 6-grass pollen allergoid.

Science.gov (United States)

Pfaar, O; Hohlfeld, J M; Al-Kadah, B; Hauswald, B; Homey, B; Hunzelmann, N; Schliemann, S; Velling, P; Worm, M; Klimek, L

2017-11-01

Subcutaneous allergen immunotherapy with grass pollen allergoids has been proven to be effective and safe in the treatment of patients with allergic rhinoconjunctivitis. Based on the extensive cross-reactivity among Pooideae species, it has been suggested that grass pollen extracts could be prepared from a single species, rather than from a multiple species mixture. To find the optimal dose of a Phleum pratense (P. pratense) allergoid preparation and compare its efficacy and safety to a 6-grass pollen allergoid preparation. In this double-blind, placebo-controlled study (EudraCT: 2011-000674-58), three doses of P. pratense allergoid (1800 therapeutic units (TU), standard-dose 6000 TU and 18 000 TU) were compared with placebo and the marketed 6-grass pollen allergoid (6000 TU). In a pre-seasonal dosing regimen, 102 patients were randomized to five treatment groups and received nine subcutaneous injections. The primary efficacy endpoint was the change in weal size (late-phase reaction [LPR]) in response to the intracutaneous testing (ICT) before and after treatment, comparing the active allergoids to placebo. Secondary outcomes were the change in Total Nasal Symptom Score (TNSS) assessed in the allergen exposure chamber (AEC), the changes in P. pratense-serum-specific IgG 4 and the incidence of adverse events (AEs). All three doses of the P. pratense and the 6-grass pollen allergoid preparations were significantly superior to placebo for the primary outcome, whereas there were no significant differences in the change in TNSS. Compared to the standard-dose, the high-dose of P. pratense did not produce any additional significant benefit, but showed a slight increase in AEs. Yet this increase in AEs was lower than for the 6-grass pollen preparation. The standard-dose of the new P. pratense allergoid was comparable to the marketed 6-grass pollen preparation at equal dose for the parameters measured. © 2017 The Authors. Clinical & Experimental Allergy Published by John

GRASS GIS: The first Open Source Temporal GIS

Science.gov (United States)

Gebbert, Sören; Leppelt, Thomas

2015-04-01

GRASS GIS is a full featured, general purpose Open Source geographic information system (GIS) with raster, 3D raster and vector processing support[1]. Recently, time was introduced as a new dimension that transformed GRASS GIS into the first Open Source temporal GIS with comprehensive spatio-temporal analysis, processing and visualization capabilities[2]. New spatio-temporal data types were introduced in GRASS GIS version 7, to manage raster, 3D raster and vector time series. These new data types are called space time datasets. They are designed to efficiently handle hundreds of thousands of time stamped raster, 3D raster and vector map layers of any size. Time stamps can be defined as time intervals or time instances in Gregorian calendar time or relative time. Space time datasets are simplifying the processing and analysis of large time series in GRASS GIS, since these new data types are used as input and output parameter in temporal modules. The handling of space time datasets is therefore equal to the handling of raster, 3D raster and vector map layers in GRASS GIS. A new dedicated Python library, the GRASS GIS Temporal Framework, was designed to implement the spatio-temporal data types and their management. The framework provides the functionality to efficiently handle hundreds of thousands of time stamped map layers and their spatio-temporal topological relations. The framework supports reasoning based on the temporal granularity of space time datasets as well as their temporal topology. It was designed in conjunction with the PyGRASS [3] library to support parallel processing of large datasets, that has a long tradition in GRASS GIS [4,5]. We will present a subset of more than 40 temporal modules that were implemented based on the GRASS GIS Temporal Framework, PyGRASS and the GRASS GIS Python scripting library. These modules provide a comprehensive temporal GIS tool set. The functionality range from space time dataset and time stamped map layer management

MACRO NUTRIENTS UPTAKE OF FORAGE GRASSES AT DIFFERENT SALINITY STRESSES

Directory of Open Access Journals (Sweden)

F. Kusmiyati

2014-10-01

Full Text Available The high concentration of sodium chloride (NaCl in saline soils has negative effects on the growth ofmost plants. The experiment was designed to evaluate macro nutrient uptake (Nitrogen, Phosphorus andPotassium of forage grasses at different NaCl concentrations in growth media. The experiment wasconducted in a greenhouse at Forage Crops Laboratory of Animal Agriculture Faculty, Diponegoro University.Split plot design was used to arrange the experiment. The main plot was forage grasses (Elephant grass(Pennisetum purpureum and King grass (Pennisetum hybrida. The sub plot was NaCl concentrationin growth media (0, 150, and 300 mM. The nitrogen (N, phosphorus (P and potassium (K uptake in shootand root of plant were measured. The result indicated increasing NaCl concentration in growth mediasignificantly decreased the N, P and K uptake in root and shoot of the elephant grass and king grass. Thepercentage reduction percentage of N, P and K uptake at 150 mM and 300 mM were high in elephant grassand king grass. It can be concluded that based on nitrogen, phosphorus and potassium uptake, elephantgrass and king grass are not tolerant to strong and very strong saline soil.

Grasses as invasive plants in South Africa revisited: Patterns, pathways and management

Directory of Open Access Journals (Sweden)

Vernon Visser

2017-03-01

Full Text Available Background: In many countries around the world, the most damaging invasive plant species are grasses. However, the status of grass invasions in South Africa has not been documented recently. Objectives: To update Sue Milton’s 2004 review of grasses as invasive alien plants in South Africa, provide the first detailed species level inventory of alien grasses in South Africa and assess the invasion dynamics and management of the group. Method: We compiled the most comprehensive inventory of alien grasses in South Africa to date using recorded occurrences of alien grasses in the country from various literature and database sources. Using historical literature, we reviewed past efforts to introduce alien grasses into South Africa. We sourced information on the origins, uses, distributions and minimum residence times to investigate pathways and patterns of spatial extent. We identified alien grasses in South Africa that are having environmental and economic impacts and determined whether management options have been identified, and legislation created, for these species. Results: There are at least 256 alien grass species in the country, 37 of which have become invasive. Alien grass species richness increased most dramatically from the late 1800s to about 1940. Alien grass species that are not naturalised or invasive have much shorter residence times than those that have naturalised or become invasive. Most grasses were probably introduced for forage purposes, and a large number of alien grass species were trialled at pasture research stations. A large number of alien grass species in South Africa are of Eurasian origin, although more recent introductions include species from elsewhere in Africa and from Australasia. Alien grasses are most prevalent in the south-west of the country, and the Fynbos Biome has the most alien grasses and the most widespread species. We identified 11 species that have recorded environmental and economic impacts in the

Orthogonal cutting of laser beam melted parts

Science.gov (United States)

Götze, Elisa; Zanger, Frederik; Schulze, Volker

2018-05-01

The finishing process of parts manufactured by laser beam melting is of high concern due to the lack of surface accuracy. Therefore, the focus of this work lies on the influence of the build-up direction of the parts and their effect on the finishing process. The orthogonal cutting reveals findings in the fields of chip formation, involved forces and temperatures appearing during machining. In the investigations, the cutting depth was varied between 0.05 and 0.15 mm representing a finishing process and the cutting velocity ranges from 30 to 200 m/min depending on the material. The experiments contain the materials stainless steel (AISI 316L), titanium (Ti6Al4V) and nickel-base alloy (IN718). The two materials named latter are of high interest in the aerospace sector and at the same time titanium is used in the medical field due to its biocompatibility. For the materials IN718 and Ti6Al4V a negative rake angle of -7.5° and for stainless steel a rake angle of 12.5° are chosen for the cutting experiments. The results provide the base for processing strategies. Therefore, the specimens were solely laser beam melted without post-processing like heat treatment. The evaluation of the experiments shows that an increase in cutting speed has different effects depending on the material. For stainless steel the measured forces regarding the machining direction to the layers approach the same values. In contrast, the influence of the layers regarding the forces appearing during orthogonal cutting of the materials IN718 and Ti6Al4V differ for lower cutting speeds.

Efecto de la gallinaza y del estiércol bovino frescos sobre la producción de forraje de la gramínea King grass (Pennisetum purpureum x P. americanum Burton en un andosol de Cajibio-Cauca

Directory of Open Access Journals (Sweden)

León C. Pedro R.

1986-06-01

Full Text Available Se evaluó la respuesta en el rendimiento del "King qrass" a la aplicación de fertilizantes orgánicos, úrea y cal dolomítica. Los mayores rendimientos de forraje seco se obtuvieron con la aplicación por corte de tres toneladas de gallinaza/ha, aunque no fue diferente estadísticamente del tratamiento con úrea (200 kg de N/ha. A pesar de ésto, parecen poco recomendables cantidades mayores de 1 t de gallinaza/ha y 50 kg de N/ha-corte, tratamientos que obtuvieron igual comportamiento en cuanto a rendimiento se refiere. La producción no respondió a las aplicaciones de cal.The yield response of "King grass" Pennisetum purpureum x P. americanum Burton, to an organic and urea fertilization was evaluated under and andosol at the departamento del Cauca, Colombia. The treatments with lime (O and 2 t of dolomitic lime/ha showed no statistical difference. The highest dry forage yields for "King grass" were obtained with three t of hen-dung/ha/cut although there was no difference with urea (200 kg of N/ ha/cut. Nevertheless, quantities greater than 1 t of hen-dung/ha/cut and 50 kg of N/ha/cut are not recommended, since they showed the same behavior as to yield is concerned.

Lessons learned in managing alfalfa-grass mixtures

Science.gov (United States)

Grass-alfalfa mixtures have a number of benefits that make them attractive to producers. However, they can be problematic to establish and maintain. Research programs have made progress in understanding the benefits and challenges of alfalfa-grass mixtures. Mixtures may have greater winter survival ...

Magnetofluidic testing of rock cutting knives

International Nuclear Information System (INIS)

Buioca, C.D.; Iusan, Vasile; Pirlea, Remus

2002-01-01

The nondestructive testing of cutting knives consists in the determination of nonuniformity of a magnetic fluid layer applied on the horizontally placed surface of the magnetized cutting plate of the knife. A low constant magnetic field was applied perpendicular to the knife surface and a uniform magnetic fluid layer was applied. The defects as nonuniform brass layer, fissures or small cavities between the cutting plate and knife core determine the apparition of magnetic field gradients and therefore magnetic forces acting on the magnetic fluid which migrates to the zones with higher magnetic field intensity. After several minutes, a nonuniform layer of magnetic fluid was directly observed. Quantitative results, concerning the position and dimensions of the defect, were obtained by computer aided processing of the magnetic fluid layer image. Experimental data for several cutting knives are presented in the paper

Variation in important pasture grasses: I. Morphological and ...

African Journals Online (AJOL)

Variation in important pasture grasses: I. Morphological and geographical variation. ... Seven species are important pasture grasses throughout the western Transvaal, Orange Free State, northern Cape and Natal. ... Language: English.

Document segmentation via oblique cuts

Science.gov (United States)

Svendsen, Jeremy; Branzan-Albu, Alexandra

2013-01-01

This paper presents a novel solution for the layout segmentation of graphical elements in Business Intelligence documents. We propose a generalization of the recursive X-Y cut algorithm, which allows for cutting along arbitrary oblique directions. An intermediate processing step consisting of line and solid region removal is also necessary due to presence of decorative elements. The output of the proposed segmentation is a hierarchical structure which allows for the identification of primitives in pie and bar charts. The algorithm was tested on a database composed of charts from business documents. Results are very promising.

Setaria viridis and Setaria italica, model genetic systems for the Panicoid grasses.

Science.gov (United States)

Li, Pinghua; Brutnell, Thomas P

2011-05-01

Setaria italica and its wild ancestor Setaria viridis are diploid C(4) grasses with small genomes of ∼515 Mb. Both species have attributes that make them attractive as model systems. Setaria italica is a grain crop widely grown in Northern China and India that is closely related to the major food and feed crops maize and sorghum. A large collection of S. italica accessions are available and thus opportunities exist for association mapping and allele mining for novel variants that will have direct application in agriculture. Setaria viridis is the weedy relative of S. italica with many attributes suitable for genetic analyses including a small stature, rapid life cycle, and prolific seed production. Setaria sp. are morphologically similar to most of the Panicoideae grasses, including major biofuel feedstocks, switchgrass (Panicum virgatum) and Miscanthus (Miscanthus giganteus). They are broadly distributed geographically and occupy diverse ecological niches. The cross-compatibility of S. italica and S. viridis also suggests that gene flow is likely between wild and domesticated accessions. In addition to serving as excellent models for C(4) photosynthesis, these grasses provide novel opportunities to study abiotic stress tolerance and as models for bioenergy feedstocks.

Determination of cut front position in laser cutting

Science.gov (United States)

Pereira, M.; Thombansen, U.

2016-07-01

Laser cutting has a huge importance to manufacturing industry. Laser cutting machines operate with fixed technological parameters and this does not guarantee the best productivity. The adjustment of the cutting parameters during operation can improve the machine performance. Based on a coaxial measuring device it is possible to identify the cut front position during the cutting process. This paper describes the data analysis approach used to determine the cut front position for different feed rates. The cut front position was determined with good resolution, but improvements are needed to make the whole process more stable.

Genome-Wide Analysis of Syntenic Gene Deletion in the Grasses

Science.gov (United States)

Schnable, James C.; Freeling, Michael; Lyons, Eric

2012-01-01

The grasses, Poaceae, are one of the largest and most successful angiosperm families. Like many radiations of flowering plants, the divergence of the major grass lineages was preceded by a whole-genome duplication (WGD), although these events are not rare for flowering plants. By combining identification of syntenic gene blocks with measures of gene pair divergence and different frequencies of ancient gene loss, we have separated the two subgenomes present in modern grasses. Reciprocal loss of duplicated genes or genomic regions has been hypothesized to reproductively isolate populations and, thus, speciation. However, in contrast to previous studies in yeast and teleost fishes, we found very little evidence of reciprocal loss of homeologous genes between the grasses, suggesting that post-WGD gene loss may not be the cause of the grass radiation. The sets of homeologous and orthologous genes and predicted locations of deleted genes identified in this study, as well as links to the CoGe comparative genomics web platform for analyzing pan-grass syntenic regions, are provided along with this paper as a resource for the grass genetics community. PMID:22275519

Influence of species and preservations on the quality and safety of grass silages

Directory of Open Access Journals (Sweden)

Jiří Skládanka

2010-01-01

Full Text Available The paper evaluates the quality of model silages made of wilted grass biomass and treated with silage additives. Grass species used for the production of silages were Lolium perenne, Festulolium pabulare and Festulolium braunii harvested in the first cut at the stage of earing. The assessed grass species were wilted after the cut for an identical time 36 hours (2008, resp. 24 hours (2009. The treatment was made either with a chemical preparation (formic acid, propionic acid, ammonium formate and/or with a bio­lo­gi­cal inoculant (Enterococcus faecium, Lactobacillus plantarum, Pediococcus acidilactici, Lactobacillus salivarius, cellulase, hemicellulase and amylase. The amount of the chemical ingredient was 4 l . t−1 and the amount of the biological additive was 10 g . t−1.The biomass was after wilting ensilaged in con­tai­ners whose diameter and height were 0.15 m and 0.64 m, respectively. After 60 days of ensilaging, the silages were assessed for pH, organic acids content, ethanol content and acidity of water extract (AWE; organic nutrients assessed in the silages were crude fibre (CF, neutral detergent fibre (NDF, acid detergent fibre (ADF, crude protein (CP and digestibility of organic matter (DOM. Hygienic safety was assessed from the contents of zearalenon, fumonisin and aflatoxin mycotoxins. The high (P < 0.05 dry matter (DM content in Festulolium pabulare silages indicates that the species tends to rapid wilting. The higher DM content reflected in lower biomass losses (P < 0.05. The lowest pH values (P < 0.05 were detected in silages made of Festulolium braunii. The fact relates to the higher content of lactic acid in the prepared microsilages. The use of ensiling additives affected the quality of extracts. Namely the application of the biological additive led to the increased content (P < 0.05 of not only lactic acid but acetic acid too. Titrable acidity was not affected by the ensiling additives. As to the

Mineral content of hay harvested in Bavarian and Swiss horse farms. Predictive value of cutting time, number of cut, botanical composition, origin and fertilization.

Science.gov (United States)

Kienzle, E; Möllmann, F; Nater, S; Wanner, M; Wichert, B

2008-12-01

Hay samples from 29 horse farms in Southern Upper Bavaria and 31 horse farms in Switzerland were taken and analysed for minerals such as calcium, magnesium, phosphorus and potassium. The content of herbs and legumes in the hay was determined and the Weende analysis was performed. Comparison between Bavaria and Switzerland resulted in comparable calcium contents of approximately 4 g Ca/kg dry matter (DM) in grass hay. Hay with more than 10% of herbs and legumes found only in Switzerland showed higher Ca contents of >7 g Ca/kg DM in hay. The mineral contents of phosphorus and potassium were lower in hay from Switzerland (P: 1.8 +/- 0.7 g/kg DM, K: 15.4 +/- 5.1 g/kg DM) than from Bavaria (P: 3.8 +/- 0.6 g/kg DM, K: 20.0 +/- 6.0 DM), whereas the magnesium content of the hay showed no difference between the regions ( approximately 1.5 g Mg/kg DM). Very late first grass hay cuts showed low magnesium and calcium (<4 g/kg DM) contents. Further minerals in the hay for horses differed from those in dairy cattle in the same region. Fertilization showed only small effects on the mineral contents of the hay produced for horses. Therefore, in calculation of ration and production of supplements for horses, these differences should be taken into account.

Numerical analysis of the effect of the TEM00 radiation mode polarisation on the cut shape in laser cutting of thick metal sheets

International Nuclear Information System (INIS)

Zaitsev, A V; Kovalev, O B; Orishich, Anatolii M; Fomin, V M

2005-01-01

The effect of polarisation of a Gaussian beam on the radiation absorption during laser cutting of metals is investigated. A generalised formula is proposed for calculating the absorption coefficient, which describes the polarisation of three types (linear, elliptical, and circular), taking into account the fact that the beam may interact with a metal surface of an arbitrary shape. A comparison with the existing analogues (in the cases of linear and circular radiation polarisation) confirmed the advantage of employing the formula for the spatial description of the shape of the surface produced, which is highly important for processing (cutting, welding, drilling) of thick materials. The effect of laser radiation characteristics on the surface shape and cut depth in cutting stainless steel sheets is investigated numerically. It is shown for the first time that the cutting of materials by the TEM 00 beam is most efficient when the beam has elliptical polarisation directed along the direction of beam displacement and characterised by a specific axial ratio. (laser applications and other topics in quantum electronics)

Grass-on-grass competition along a catenal gradient in mesic ...

African Journals Online (AJOL)

Three aboveground treatments (full light competition, no light competition and clipping to simulate grazing), and two belowground treatments (full belowground competition and belowground competition excluded by a root tube), were used. On all soil depths the three grass species differed in mean mass, with E. racemosa ...

Results from the 5-year SQ grass sublingual immunotherapy tablet asthma prevention (GAP) trial in children with grass pollen allergy.

Science.gov (United States)

Valovirta, Erkka; Petersen, Thomas H; Piotrowska, Teresa; Laursen, Mette K; Andersen, Jens S; Sørensen, Helle F; Klink, Rabih

2018-02-01

Allergy immunotherapy targets the immunological cause of allergic rhinoconjunctivitis and allergic asthma and has the potential to alter the natural course of allergic disease. The primary objective was to investigate the effect of the SQ grass sublingual immunotherapy tablet compared with placebo on the risk of developing asthma. A total of 812 children (5-12 years), with a clinically relevant history of grass pollen allergic rhinoconjunctivitis and no medical history or signs of asthma, were included in the randomized, double-blind, placebo-controlled trial, comprising 3 years of treatment and 2 years of follow-up. There was no difference in time to onset of asthma, defined by prespecified asthma criteria relying on documented reversible impairment of lung function (primary endpoint). Treatment with the SQ grass sublingual immunotherapy tablet significantly reduced the risk of experiencing asthma symptoms or using asthma medication at the end of trial (odds ratio = 0.66, P year posttreatment follow-up, and during the entire 5-year trial period. Also, grass allergic rhinoconjunctivitis symptoms were 22% to 30% reduced (P years). At the end of the trial, the use of allergic rhinoconjunctivitis pharmacotherapy was significantly less (27% relative difference to placebo, P < .001). Total IgE, grass pollen-specific IgE, and skin prick test reactivity to grass pollen were all reduced compared to placebo. Treatment with the SQ grass sublingual immunotherapy tablet reduced the risk of experiencing asthma symptoms and using asthma medication, and had a positive, long-term clinical effect on rhinoconjunctivitis symptoms and medication use but did not show an effect on the time to onset of asthma. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Status on underwater plasma arc cutting in KHI, 3

International Nuclear Information System (INIS)

Abe, Tadashi; Aota, Toshiichi; Nishizaki, Tadashi; Nakayama, Shigeru; Yamashita, Seiji

1983-01-01

In Kawasaki Heavy Industries, Ltd., the development of a remote dismantling system by underwater plasma arc cutting process has been advanced, expecting its application to the dismantling and removal of nuclear reactor facilities. In the previous two reports, the fundamental experimental results such as the comparison of the cutting capability in air and in water were shown, but this time, the remote automatic cutting of wedge-shaped specimens was carried out, using a newly installed manipulator for underwater works, therefore its outline is reported. Also the cutting experiment by overhead position and vertical position was performed by using the same equipment, and comparison was made with the cutting capability by downhand and horizontal positions. It is important to grasp the cutting characteristics in the case of upward advancing and downward advancing cuttings by overhead and vertical positions when the cutting of pressure vessels and horizontal pipes into rings is supposed. The experimental apparatus, the cutting conditions, the testing method and the test results of the cutting capability test, the test of changing direction during cutting, and the remote cutting of pipes into rings are described. The underwater plasma arc cutting can cut all metals, the cutting speed is relatively high, and the apparatus is simple and compact. (Kako, I.)

Experimental testing of exchangeable cutting inserts cutting ability

OpenAIRE

Čep, Robert; Janásek, Adam; Čepová, Lenka; Petrů, Jana; Hlavatý, Ivo; Car, Zlatan; Hatala, Michal

2013-01-01

The article deals with experimental testing of the cutting ability of exchangeable cutting inserts. Eleven types of exchangeable cutting inserts from five different manufacturers were tested. The tested cutting inserts were of the same shape and were different especially in material and coating types. The main aim was both to select a suitable test for determination of the cutting ability of exchangeable cutting inserts and to design such testing procedure that could make it possible...

Determination of cut front position in laser cutting

International Nuclear Information System (INIS)

Pereira, M; Thombansen, U

2016-01-01

Laser cutting has a huge importance to manufacturing industry. Laser cutting machines operate with fixed technological parameters and this does not guarantee the best productivity. The adjustment of the cutting parameters during operation can improve the machine performance. Based on a coaxial measuring device it is possible to identify the cut front position during the cutting process. This paper describes the data analysis approach used to determine the cut front position for different feed rates. The cut front position was determined with good resolution, but improvements are needed to make the whole process more stable. (paper)

Nitrogen fertilization of grass/clover swards under cutting or grazing by dairy cows

DEFF Research Database (Denmark)

Søegaard, Karen

2009-01-01

farms over a period of three years. Nitrogen was applied at four rates (0, 75, 150, and 225 kg N year-1) with cutting or grazing regime in Year 1 and Year 2, after establishment. A spring-only application of 150 kg N was compared with four applications during the season, which was the fertilization...... affected. The results indicate different possibilities for strategic fertilization both at farm and field level, and in swards with a high clover content it demonstrates how the clover content can be used as a buffer both for maximizing the N-response and for manipulating the production profile.......Intensively managed perennial ryegrass/white clover (Lolium perenne L. and Trifolium repens L.) swards receive relatively high levels of fertilizer N, and high N surpluses can subsequently be found. The N-fertilization effects on growth, yield, and herbage quality were therefore examined on three...

DIRECT OBSERVATIONS OF TETHER-CUTTING RECONNECTION DURING A MAJOR SOLAR EVENT FROM 2014 FEBRUARY 24 TO 25

Energy Technology Data Exchange (ETDEWEB)

Chen, Huadong; Zhang, Jun; Yang, Shuhong; Li, Ting [Key Laboratory of Solar Activity, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012 (China); Cheng, Xin [School of Astronomy and Space Science, Nanjing University, Nanjing 210093 (China); Ma, Suli, E-mail: hdchen@nao.cas.cn [College of Science, China University of Petroleum, Qingdao 266580 (China)

2014-12-20

Using multi-wavelength data from the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory, we investigated two successive solar flares, a C5.1 confined flare and an X4.9 ejective flare with a halo coronal mass ejection, in NOAA active region 11990 from 2014 February 24 to 25. Before the confined flare onset, EUV brightening beneath the filament was detected. As the flare began, a twisted helical flux rope (FR) wrapping around the filament moved upward and then stopped, and in the meantime an obvious X-ray source below it was observed. Prior to the ejective X4.9 flare, some pre-existing loop structures in the active region interacted with each other, which produced a brightening region beneath the filament. Meanwhile, a small flaring loop appeared below the interaction region and some new helical lines connecting the far ends of the loop structures were gradually formed and continually added into the former twisted FR. Then, due to the resulting imbalance between the magnetic pressure and tension, the new FR, together with the filament, erupted outward. Our observations coincide well with a tether-cutting model, suggesting that the two flares probably have the same triggering mechanism, i.e., tether-cutting reconnection. To our knowledge, this is the first direct observation of tether-cutting reconnection occurring between pre-existing loops in an active region. In the ejective flare case, the erupting filament exhibited an Ω-like kinked structure and underwent an exponential rise after a slow-rise phase, indicating that the kink instability might be also responsible for the eruption initiation.

Convex relationships in ecosystems containing mixtures of trees and grass

CSIR Research Space (South Africa)

Scholes, RJ

2003-12-01

Full Text Available The relationship between grass production and the quantity of trees in mixed tree-grass ecosystems (savannas) is convex for all or most of its range. In other words, the grass production declines more steeply per unit increase in tree quantity...

A study on practical use of underwater abrasive water jet cutting

Science.gov (United States)

Yamaguchi, Hitoshi; Demura, Kenji

1993-09-01

The practicality of underwater abrasive water jet cutting technology was studied in experiments. A study of abrasives in slurried form showed that optimum polymer concentration can be selected to suit underwater conditions. For the long-distance transport of slurry from the ocean surface to the ocean floor, a direct supply system by hose proved to be practical. This system takes advantage of the insolubility of the slurry in water due to a difference in specific gravity. For cutting thick steel plate at great ocean depths, a simulation with a pressurized container revealed the requirements for actual cutting. Confirmation of remote cutting operations will become the most important technology in field applications. Underwater sound vibration characteristics were found to change significantly in direct response to modifications in cutting conditions. This will be important basic data to develop an effective sensoring method.

Establishing native warm season grasses on Eastern Kentucky strip mines

Energy Technology Data Exchange (ETDEWEB)

Barnes, T.G.; Larkin, J.L.; Arnett, M.B. [Univ. of Kentucky, Lexington, KY (United States). Dept. of Forestry

1998-12-31

The authors evaluated various methods of establishing native warm season grasses on two reclaimed Eastern Kentucky mines from 1994--1997. Most current reclamation practices incorporate the use of tall fescue (Festuca arundinacea) and other cool-season grasses/legumes that provide little wildlife habitats. The use of native warm season grasses will likely improve wildlife habitat on reclaimed strip mines. Objectives of this study were to compare the feasibility of establishing these grasses during fall, winter, or spring using a native rangeland seeder or hydroseeding; a fertilizer application at planting; or cold-moist stratification prior to hydroseeding. Vegetative cover, bare ground, species richness, and biomass samples were collected at the end of each growing season. Native warm season grass plantings had higher plant species richness compared to cool-season reclamation mixtures. There was no difference in establishment of native warm season grasses as a result of fertilization or seeding technique. Winter native warm season grass plantings were failures and cold-moist stratification did not increase plant establishment during any season. As a result of a drought during 1997, both cool-season and warm season plantings were failures. Cool-season reclamation mixtures had significantly more vegetative cover and biomass compared to native warm season grass mixtures and the native warm season grass plantings did not meet vegetative cover requirements for bond release. Forbs and legumes that established well included pale purple coneflower (Echinacea pallida), lance-leaf coreopsis (Coreopsis lanceolata), round-headed lespedeza (Lespedeza capitata), partridge pea (Cassia fasiculata), black-eyed susan (Rudbeckia hirta), butterfly milkweed (Asclepias tuberosa), and bergamot (Monarda fistulosa). Results from two demonstration plots next to research plots indicate it is possible to establish native warm season grasses on Eastern Kentucky strip mines for wildlife habitat.

Establishing native warm season grasses on Eastern Kentucky strip mines

International Nuclear Information System (INIS)

Barnes, T.G.; Larkin, J.L.; Arnett, M.B.

1998-01-01

The authors evaluated various methods of establishing native warm season grasses on two reclaimed Eastern Kentucky mines from 1994--1997. Most current reclamation practices incorporate the use of tall fescue (Festuca arundinacea) and other cool-season grasses/legumes that provide little wildlife habitats. The use of native warm season grasses will likely improve wildlife habitat on reclaimed strip mines. Objectives of this study were to compare the feasibility of establishing these grasses during fall, winter, or spring using a native rangeland seeder or hydroseeding; a fertilizer application at planting; or cold-moist stratification prior to hydroseeding. Vegetative cover, bare ground, species richness, and biomass samples were collected at the end of each growing season. Native warm season grass plantings had higher plant species richness compared to cool-season reclamation mixtures. There was no difference in establishment of native warm season grasses as a result of fertilization or seeding technique. Winter native warm season grass plantings were failures and cold-moist stratification did not increase plant establishment during any season. As a result of a drought during 1997, both cool-season and warm season plantings were failures. Cool-season reclamation mixtures had significantly more vegetative cover and biomass compared to native warm season grass mixtures and the native warm season grass plantings did not meet vegetative cover requirements for bond release. Forbs and legumes that established well included pale purple coneflower (Echinacea pallida), lance-leaf coreopsis (Coreopsis lanceolata), round-headed lespedeza (Lespedeza capitata), partridge pea (Cassia fasiculata), black-eyed susan (Rudbeckia hirta), butterfly milkweed (Asclepias tuberosa), and bergamot (Monarda fistulosa). Results from two demonstration plots next to research plots indicate it is possible to establish native warm season grasses on Eastern Kentucky strip mines for wildlife habitat

Melt Flow and Energy Limitation of Laser Cutting

Directory of Open Access Journals (Sweden)

Pavel Hudeček

2016-01-01

Full Text Available Laser technology is a convertible technology for plenty of parts in most materials. Laser material processing for industrial manufacturing applications is today a widespread procedure for welding, cutting, marking and micro machining of metal and plastic parts and components. Involvement and support this huge mass-production industry of laser cutting, new technology and dry-process using lasers were and are being actively developed. Fundamentally, industrial laser cutting or other applications on industry should satisfy the four key practical application issues including “Quality or Performance”, “Throughput or Speed”, “Cost or Total Ownership Cost”, and “Reliability”. Laser requires for examples several complicated physical factors to be resolved including die strength to be enable good wire-bonding and survival of severe cycling test, clean cutting wall surface, good cutting of direct attach film, and proper speed of cutting for achieving economy of throughput. Some example of maximum cutting rate, wherewith is normally limited laser energy, cutting speed is depend on type laser, different of cutting with one laser beam and beam pattern and applied laser power/material thickness will be introduced in this paper.

Uptake Evaluation Of Glass house Grown Grasses In Radio phyto remediation Of Caesium-Contaminated Soil

International Nuclear Information System (INIS)

Zal U'yun Wan Mahmood; Nur Humaira' Lau Abdullah; Khairuddin Abdul Rahim

2014-01-01

A glass house experiment was performed to evaluate the uptake of grasses viz. Napier and Vetiver in radiophytoremediation of caesium-contaminated soil. The glass house radiophytoremediation experiment was designed according to the Randomized Complete Block Design (RCBD). The grasses were grown in troughs filled with soil mixed with a known specific activity of 134 Cs. Initial Cs activity and activity after different cultivation time intervals of 1, 3, 6 and 9 months were analyzed using gamma spectrometer direct measurement. The results showed the uptake of caesium by Napier and Vetiver after 9 months with the transfer factors (TF) were 4.70 and 6.25, respectively. Meanwhile, the remediation of caesium from contaminated soil at the same time was 95.25 % (Napier) and 95.58 % (Vetiver). Both grasses have been found to accumulate caesium, with Vetiver accumulating higher than Napier. Thus, the present study suggests that Vetiver could be used as a potential plant for radiophytoremediation of caesium. (author)

Controlling grass weeds on hard surfaces

DEFF Research Database (Denmark)

Rask, Anne Merete; Kristoffersen, Palle; Andreasen, Christian

2012-01-01

An experiment was conducted on a specially designed hard surface to study the impact of time interval between flaming treatments on the regrowth and flower production of two grass weeds. The goal of this experiment was to optimize the control of annual bluegrass and perennial ryegrass, both species...... that are very difficult to control without herbicides. Aboveground biomass from 72 plants per treatment was harvested and dry weights were recorded at regular intervals to investigate how the plants responded to flaming. Regrowth of the grasses was measured by harvesting aboveground biomass 2 wk after......, as they did not increase the reduction of aboveground biomass compared with the 7-d treatment interval. Knowledge on the regrowth of grass weeds after flaming treatments provided by this study can help improve recommendations given to road keepers and park managers for management on these weeds. Nomenclature...

Core Cutting Test with Vertical Rock Cutting Rig (VRCR)

Science.gov (United States)

Yasar, Serdar; Osman Yilmaz, Ali

2017-12-01

Roadheaders are frequently used machines in mining and tunnelling, and performance prediction of roadheaders is important for project economics and stability. Several methods were proposed so far for this purpose and, rock cutting tests are the best choice. Rock cutting tests are generally divided into two groups which are namely, full scale rock cutting tests and small scale rock cutting tests. These two tests have some superiorities and deficiencies over themselves. However, in many cases, where rock sampling becomes problematic, small scale rock cutting test (core cutting test) is preferred for performance prediction, since small block samples and core samples can be conducted to rock cutting testing. Common problem for rock cutting tests are that they can be found in very limited research centres. In this study, a new mobile rock cutting testing equipment, vertical rock cutting rig (VRCR) was introduced. Standard testing procedure was conducted on seven rock samples which were the part of a former study on cutting rocks with another small scale rock cutting test. Results showed that core cutting test can be realized successfully with VRCR with the validation of paired samples t-test.

Chip science: Basic study of the single-point cutting process

International Nuclear Information System (INIS)

Donaldson, R.R.; Riddle, R.A.; Syn, C.K.; Taylor, J.S.

1986-01-01

Wear that diamond tools sustain during the cutting of electroless nickel (eNi) has been measured. Wear was detected at previously unattained levels, down to 100 A, and it was found that the tool wear resulted in a burnishing action after a relatively short cutting distance. To provide a more direct connection between computer-based modeling and experimental measurements, macroscopic cutting tests on a well-characterized aluminum material were also performed. The results showed good agreement between calculated and measured cutting forces

Microbial protein synthesis, digestion and lactation responses of cows to grass or grass-red clover silage diet supplemented with barley or oats

Directory of Open Access Journals (Sweden)

A. VANHATALO

2008-12-01

Full Text Available The study was conducted to evaluate effects of silage type (grass-red clover vs. pure grass and grain supplement (oats vs. barley on rumen fermentation, post-ruminal nutrient flows, diet digestion and milk production. Four primiparous Finnish Ayrshire cows fitted with cannulae in the rumen and duodenum were used in a 4 × 4 Latin square experiment with four 28-d experimental periods and 2 × 2 factorial arrangements of treatments. Using red clover-containing (40% silage rather than pure grass silage had minor effects on rumen fermentation or diet digestion but increased non-ammonia nitrogen (N flow in terms of increased flows of microbial and dietary N entering to the small intestine. This was reflected as a reduced ruminal N degradability on grass-red clover diets. Furthermore, grass-red clover diets in comparison to grass silage diets increased milk lactose concentration and yields of milk, protein and lactose. Feeding oats in replacement for barley had minor effects on rumen fermentation or post-ruminal non-ammonia N flows but reduced digestibility of organic matter and neutral detergent fibre in the diet. Using oats rather than barley increased yields of milk and lactose but reduced milk protein concentration. Oats also increased proportions of C18:0 and C18:1 in milk fat and reduced those of C10:0 to C16:0. It is concluded that inclusion of red clover and replacement of barley with oats in grass silage based diets have beneficial effects in dairy cow production.;

Economic technology of laser cutting

Science.gov (United States)

Fedin, Alexander V.; Shilov, Igor V.; Vassiliev, Vladimir V.; Malov, Dmitri V.; Peskov, Vladimir N.

2000-02-01

The laser cutting of color metals and alloys by a thickness more than 2 mm has significant difficulties due to high reflective ability and large thermal conduction. We made it possible to raise energy efficiency and quality of laser cutting by using a laser processing system (LPS) consisting both of the YAG:Nd laser with passive Q-switching on base of LiF:F2- crystals and the CO2 laser. A distinctive feature of the LPS is that the radiation of different lasers incorporated in a coaxial beam has simultaneously high level of peak power (more than 400 kW in a TEM00 mode) and significant level of average power (up to 800 W in a TEM01 mode of the CO2 laser). The application of combined radiation for cutting of an aluminum alloy of D16 type made it possible to decrease the cutting energy threshold in 1.7 times, to increase depth of treatment from 2 up to 4 mm, and velocity from 0.015 up to 0.7 m/min, and also to eliminate application of absorptive coatings. At cutting of steels the velocity of treatment was doubled, and also an oxygen flow was eliminated from the technological process and replaced by the air. The obtained raise of energy efficiency and quality of cutting is explained by an essential size reducing of a formed penetration channel and by the shifting of a thermal cutting mode from melting to evaporation. The evaluation of interaction efficiency of a combined radiation was produced on the basis of non-stationary thermal-hydrodynamic model of a heating source moving as in the cutting direction, and also into the depth of material.

Estimating the energy requirements and CO{sub 2} emissions from production of the perennial grasses miscanthus, switchgrass and reed canary grass

Energy Technology Data Exchange (ETDEWEB)

Bullard, M.; Metcalfe, P.

2001-07-01

The perennial grasses miscanthus, reed canary and swithchgrass have attractions as energy crops in the United Kingdom: all have low demand for fertilizer and pesticide, and are harvested annually. Research on energy ratios and carbon ratios of the grasses is reported. A Microsoft Excel-based model was developed (from an ADAS database) and the input calculations and assumptions are explained. The study demonstrated the attractions of theses grasses as a source of fuel. The results agreed with those from a model developed for the SRC.

Oxygen isotope fractionations across individual leaf carbohydrates in grass and tree species.

Science.gov (United States)

Lehmann, Marco M; Gamarra, Bruno; Kahmen, Ansgar; Siegwolf, Rolf T W; Saurer, Matthias

2017-08-01

Almost no δ 18 O data are available for leaf carbohydrates, leaving a gap in the understanding of the δ 18 O relationship between leaf water and cellulose. We measured δ 18 O values of bulk leaf water (δ 18 O LW ) and individual leaf carbohydrates (e.g. fructose, glucose and sucrose) in grass and tree species and δ 18 O of leaf cellulose in grasses. The grasses were grown under two relative humidity (rH) conditions. Sucrose was generally 18 O-enriched compared with hexoses across all species with an apparent biosynthetic fractionation factor (ε bio ) of more than 27‰ relative to δ 18 O LW , which might be explained by isotopic leaf water and sucrose synthesis gradients. δ 18 O LW and δ 18 O values of carbohydrates and cellulose in grasses were strongly related, indicating that the leaf water signal in carbohydrates was transferred to cellulose (ε bio  = 25.1‰). Interestingly, damping factor p ex p x , which reflects oxygen isotope exchange with less enriched water during cellulose synthesis, responded to rH conditions if modelled from δ 18 O LW but not if modelled directly from δ 18 O of individual carbohydrates. We conclude that δ 18 O LW is not always a good substitute for δ 18 O of synthesis water due to isotopic leaf water gradients. Thus, compound-specific δ 18 O analyses of individual carbohydrates are helpful to better constrain (post-)photosynthetic isotope fractionation processes in plants. © 2017 John Wiley & Sons Ltd.

A cutting-edge solution for 1µm laser metal processing

Science.gov (United States)

Baumbach, N.; Kühl, P.; Karam, J.; Jonkers, J.; Villarreal-Saucedo, F.; Reyes, M.

2017-02-01

The recent 1μm-laser cutting market is dominated by fiber and disk lasers due to their excellent beam quality of below 4mm*mrad. Teradiode's 4kW direct diode laser source achieves similar beam quality while having a different beam shape and shorter wavelengths which are known for higher absorption rates at the inclined front of the cutting keyhole. Research projects, such as the HALO Project, have additionally shown that polarized radiation and beams with shapes different from the typical LG00 lead to improved cut quality for ferrous and non-ferrous metals. [1] Diode laser have the inherent property of not being sensitive to back reflection which brings advantages in cutting high-reflective materials. The II-VI HIGHYAG laser cutting head BIMO-FSC offers the unique feature of machine controlled and continuous adjustment of both the focus diameter and the focus position. This feature is proven to be beneficial for cutting and piercing with high speed and small hole diameters. In addition, the optics are designed for lowest focus shift. As a leading laser processing head manufacturer, II-VI HIGHYAG qualified its BIMO-FSC MZ (M=magnification, Z=focus position) cutting head for Teradiode's 4kW direct diode laser source to offer a cutting-edge solution for highpower laser cutting. Combining the magnification ability of the cutting head with this laser source, customers experience strong advantages in cutting metals in broad thickness ranges. Thicknesses up to 25mm mild steel can easily be cut with excellent edge quality. Furthermore, a new optical setup equivalent to an axicon with a variable axicon angle is demonstrated which generates variable sized ring spots. The setup provides new degrees of freedom to tailor the energy distribution for even higher productivity and quality.

The effects of energy grass plantations on biodiversity

Energy Technology Data Exchange (ETDEWEB)

Semere, T; Slater, F

2005-07-01

The ecological impact on local wildlife of biomass plantations of three different species of grasses has been monitored in the years 2002 to 2004 inclusive at farms in Herefordshire UK. Two of the grasses were not native to Britain. Wildlife monitored included ground flora, beetles, insects, birds, small mammals, butterflies, bees and hoverflies. The results provide a baseline of biodiversity data from biomass farms in England, although due to poor crop growth, the data from the switch-grass plantation was incomplete. The surveys were carried out by Cardiff University supported financially by the DTI.

The effects of energy grass plantations on biodiversity

International Nuclear Information System (INIS)

Semere, T.; Slater, F.

2005-01-01

The ecological impact on local wildlife of biomass plantations of three different species of grasses has been monitored in the years 2002 to 2004 inclusive at farms in Herefordshire UK. Two of the grasses were not native to Britain. Wildlife monitored included ground flora, beetles, insects, birds, small mammals, butterflies, bees and hoverflies. The results provide a baseline of biodiversity data from biomass farms in England, although due to poor crop growth, the data from the switch-grass plantation was incomplete. The surveys were carried out by Cardiff University supported financially by the DTI

Improved cutting performance in high power laser cutting

DEFF Research Database (Denmark)

Olsen, Flemming Ove

2003-01-01

Recent results in high power laser cutting especially with focus on cutting of mild grade steel types for shipbuilding are described.......Recent results in high power laser cutting especially with focus on cutting of mild grade steel types for shipbuilding are described....

From the weather forecast to the prognostic moisture content of dry agricultural crops

NARCIS (Netherlands)

Atzema, A.J.

1994-01-01

Part 1

The aim of the study of grass is to forecast the drying of cut grass up to five days ahead, hourly. The first investigated problem is the response of the drying of cut grass to the weather elements. Next a simple model and an advanced model for the drying of cut

Genetic resources of perennial forage grasses in Serbia: Current state, broadening and evaluation

Directory of Open Access Journals (Sweden)

Sokolović Dejan

2017-01-01

Full Text Available Due to historical background of vegetation development, geographical position, climate and relief, Serbia represents one of the 158 world biodiversity centres, based upon the number of plant species and territory size (biodiversity index 0.72. Large areas in Serbia are under natural grasslands and pastures, composed of forage grass species, and important as source of natural plant genetic diversity and germplasm for breeding. These eco-systems represent basic prerequisites for sustainable forage production, but very low potential of them is utilized and genetic resources are not protected. Family Poaceae is present in Serbia flora with 70 genera and among them from the aspect of forage production and quality, the most important are perennial Festuca, Lolium, Dactylis, Phleum, Bromus, Arrhenatherum, Poa and Agrostis species. Most of these grasses have been bred in Serbia and lot of cultivars were released. These cultivars contain autochthonous Serbian material and represent great and important resource of genetic variability. Therefore, collecting of new samples which are acclimatised to local eco-geographical conditions and including them in plant ex situ gene bank is of exceptional importance for further utilization in different plant breeding programmes as well as genetic resources protection. These autochthonous populations have natural variability and very often have satisfactory yielding performance in comparison with introduced cultivars, which referred them for direct phenotypic selection for cultivars release. Broadening of forage grasses genotypes collection is permanent objective of Serbian scientists. Collected accessions are being characterized and evaluated for important phenological, morphological and agronomical traits. In this paper genetic resources of forage grass species, their diversity and potentials, state of the grasses gene banks, as well as possibility for breeding of new cultivars has been analysed.

Functional immunoglobulin E cross-reactivity between Pas n 1 of Bahia grass pollen and other group 1 grass pollen allergens.

Science.gov (United States)

Davies, J M; Dang, T D; Voskamp, A; Drew, A C; Biondo, M; Phung, M; Upham, J W; Rolland, J M; O'Hehir, R E

2011-02-01

Grass pollens are major triggers of allergic rhinitis and asthma, but the immunological relationships between pollen allergens of the subtropical Bahia grass, Paspalum notatum, and temperate grasses are unresolved. To assess serum IgE cross-reactivity between subtropical P. notatum and temperate Lolium perenne (Ryegrass) pollen allergens. Serum IgE reactivities of grass pollen-allergic patients with P. notatum, L. perenne and Cynodon dactylon (Bermuda grass) pollen extracts and their respective purified group 1 allergens, Pas n 1, Lol p 1 and Cyn d 1, were compared by immunoblotting, ELISA and basophil activation. In a cohort of 51 patients from a temperate region, a high frequency of IgE reactivity with each grass pollen was detected, but reactivity with L. perenne pollen was substantially greater than with P. notatum and C. dactylon pollen. Similarly, serum IgE reactivity with Lol p 1 was greater than with Pas n 1 or Cyn d 1. For seven of eight sera studied in detail, asymmetric serum IgE cross-reactivity was observed; L. perenne pollen inhibited IgE reactivity with P. notatum pollen but not the converse, and IgE reactivity with Pas n 1 was inhibited by Lol p 1 but IgE reactivity with Lol p 1 was not inhibited by Pas n 1 or Cyn d 1. Importantly, P. notatum pollen and Pas n 1 activated basophils in grass pollen-allergic patients from a temperate region, although stimulation was greater by pollen of L. perenne than P. notatum or C. dactylon, and by Lol p 1 than Pas n 1 or Cyn d 1. In contrast, a cohort of 47 patients from a subtropical region showed similar IgE reactivity with P. notatum and L. perenne pollen, and reciprocal cross-inhibition of IgE reactivity between L. perenne and P. notatum. Pollen allergens of the subtropical P. notatum, including Pas n 1, show clinically relevant IgE cross-reactivity with pollen allergens of L. perenne but also species-specific IgE reactivity. © 2011 Blackwell Publishing Ltd.

High-biomass C4 grasses-Filling the yield gap.

Science.gov (United States)

Mullet, John E

2017-08-01

A significant increase in agricultural productivity will be required by 2050 to meet the needs of an expanding and rapidly developing world population, without allocating more land and water resources to agriculture, and despite slowing rates of grain yield improvement. This review examines the proposition that high-biomass C 4 grasses could help fill the yield gap. High-biomass C 4 grasses exhibit high yield due to C 4 photosynthesis, long growth duration, and efficient capture and utilization of light, water, and nutrients. These C 4 grasses exhibit high levels of drought tolerance during their long vegetative growth phase ideal for crops grown in water-limited regions of agricultural production. The stems of some high-biomass C 4 grasses can accumulate high levels of non-structural carbohydrates that could be engineered to enhance biomass yield and utility as feedstocks for animals and biofuels production. The regulatory pathway that delays flowering of high-biomass C 4 grasses in long days has been elucidated enabling production and deployment of hybrids. Crop and landscape-scale modeling predict that utilization of high-biomass C 4 grass crops on land and in regions where water resources limit grain crop yield could increase agricultural productivity. Copyright © 2017 Elsevier B.V. All rights reserved.

Comparative study of 0° X-cut and Y + 36°-cut lithium niobate high-voltage sensing

Science.gov (United States)

Patel, N.; Branch, D. W.; Schamiloglu, E.; Cular, S.

2015-08-01

A comparison study between Y + 36° and 0° X-cut lithium niobate (LiNbO3) was performed to evaluate the influence of crystal cut on the acoustic propagation to realize a piezoelectric high-voltage sensor. The acoustic time-of-flight for each crystal cut was measured when applying direct current (DC), alternating current (AC), and pulsed voltages. Results show that the voltage-induced shift in the acoustic wave propagation time scaled quadratically with voltage for DC and AC voltages applied to X-cut crystals. For the Y + 36° crystal, the voltage-induced shift scales linearly with DC voltages and quadratically with AC voltages. When applying 5 μs voltage pulses to both crystals, the voltage-induced shift scaled linearly with voltage. For the Y + 36° cut, the voltage-induced shift from applying DC voltages ranged from 10 to 54 ps and 35 to 778 ps for AC voltages at 640 V over the frequency range of 100 Hz-100 kHz. Using the same conditions as the Y + 36° cut, the 0° X-cut crystal sensed a shift of 10-273 ps for DC voltages and 189-813 ps for AC voltage application. For 5 μs voltage pulses, the 0° X-cut crystal sensed a voltage induced shift of 0.250-2 ns and the Y + 36°-cut crystal sensed a time shift of 0.115-1.6 ns. This suggests a frequency sensitive response to voltage where the influence of the crystal cut was not a significant contributor under DC, AC, or pulsed voltage conditions. The measured DC data were compared to a 1-D impedance matrix model where the predicted incremental length changed as a function of voltage. When the voltage source error was eliminated through physical modeling from the uncertainty budget, the combined uncertainty of the sensor (within a 95% confidence interval) decreased to 0.0033% using a Y + 36°-cut crystal and 0.0032% using an X-cut crystal for all the voltage conditions used in this experiment.

Grass Rooting the System

Science.gov (United States)

Perlman, Janice E.

1976-01-01

Suggests a taxonomy of the grass roots movement and gives a general descriptive over view of the 60 groups studied with respect to origin, constituency, size, funding, issues, and ideology. (Author/AM)

Hilly grasses and leaves: a promising unconventional feed resource for livestock.

OpenAIRE

Hossain M.E.; Karim M.H.; Ahmed M.I.; Sultana S.A.

2016-01-01

The study was undertaken to find out the chemical composition of different hilly grasses and leaves available in Bandarban areas of Bangladesh. Total 10 different hilly grasses and leaves such as Bottle gourd leaf (Lagenaria siceraria), Castor bean leaf (Ricinus communis), Cogon grass (Imperata cylindrica), Dhol kolmi (Ipomoea carnea), Giant reed leaf (Arundo donax), Hilly grass (Cynodon dactylon), Pithraj leaf (Aphanamixis polystachya), Sal leaf (Shorea robusta), Shegun leaf (Tectona grandis...

Twice cutting method reduces tibial cutting error in unicompartmental knee arthroplasty.

Science.gov (United States)

Inui, Hiroshi; Taketomi, Shuji; Yamagami, Ryota; Sanada, Takaki; Tanaka, Sakae

2016-01-01

Bone cutting error can be one of the causes of malalignment in unicompartmental knee arthroplasty (UKA). The amount of cutting error in total knee arthroplasty has been reported. However, none have investigated cutting error in UKA. The purpose of this study was to reveal the amount of cutting error in UKA when open cutting guide was used and clarify whether cutting the tibia horizontally twice using the same cutting guide reduced the cutting errors in UKA. We measured the alignment of the tibial cutting guides, the first-cut cutting surfaces and the second cut cutting surfaces using the navigation system in 50 UKAs. Cutting error was defined as the angular difference between the cutting guide and cutting surface. The mean absolute first-cut cutting error was 1.9° (1.1° varus) in the coronal plane and 1.1° (0.6° anterior slope) in the sagittal plane, whereas the mean absolute second-cut cutting error was 1.1° (0.6° varus) in the coronal plane and 1.1° (0.4° anterior slope) in the sagittal plane. Cutting the tibia horizontally twice reduced the cutting errors in the coronal plane significantly (Pcutting the tibia horizontally twice using the same cutting guide reduced cutting error in the coronal plane. Copyright © 2014 Elsevier B.V. All rights reserved.

Effect of machinery wheel load on grass yield

DEFF Research Database (Denmark)

Green, Ole; Jørgensen, Rasmus Nyholm; Kristensen, Kristian

2010-01-01

Effect of machinery wheel load on grass   Ole Green1, Rasmus N. Jørgensen2, Kristian Kristensen3, René Gislum3, Dionysis Bochtis1, & Claus G. Sørensen1   1University of Aarhus, Dept. of Agricultural Engineering 2University of Southern Denmark, Inst. of Chemical Eng., Biotechnology and Environmental...... 3University of Aarhus, Dept. of Genetics and Biotechnology   Corresponding author: Ole Green Address & e-mail: Research Centre Foulum, Blichers Allé 20, 8830 Tjele. Ole.Green@agrsci.dk     Abstract   Different traffic intensities have been shown to have a negative influence on the yield of grass...... and clover. A full scale grass-clover field trial was established to estimate the effect on clover-grass yields as a function of different wheel loads and tire pressures. The trial comprised 16 different traffic intensities with 35 replicates and 1 traffic free treatment with 245 replicates, totalling 17...

Alley cropping of legumes with grasses as forages : Effect of different grass species and row spacing of gliricidia on the growth and biomass production of forages

Directory of Open Access Journals (Sweden)

Siti Yuhaeni

1998-12-01

Full Text Available A study to evaluate the effect of different grass species and row spacing of gliricidia (Gliricidia sepium on the growth and biomass production of forages in an alley cropping system was conducted in two different agroclimatical zones i.e. Bogor, located at 500 m a .s .l . with an average annual rainfall of 3,112 nun/year and Sukabumi located at 900 m a .s .l . with an average annual rainfall of 1,402 mm/year . Both locations have low N, P, and K content and the soil is classified as acidic. The experimental design used was a split plot design with 3 replicates . The main plots were different grass species i.e. king grass (Pennisetum purpureum x P. typhoides and elephant grass (P. purpureum. The sub plots were the row spacing of gliricidia at 2, 3, 4, 6 m (1 hedgerows and 4 m (2 hedgerows. The results indicated that the growth and biomass production of grasses were significantly affected (P<0 .05 by the treatments in Bogor. The highest biomass productions was obtained from the 2 m row spacing which gave the highest dry matter production of grasses (1 .65 kg/hill and gliricidia (0 .086 kg/tree . In Sukabumi the growth and biomass production of grasses and gliricidia were also significantly affected by the treatments . The highest dry matter production was obtained with 2 m row spacing (dry matter of grasses and gliricidia were 1 .12 kg/hill and 0 .026 kg/tree, respectively . The result further indicated that biomass production of forages increased with the increase in gliricidia population. The alley cropping system wich is suitable for Bogor was the 2 m row spacing of gliricidia intercropped with either king or elephant grass and for Sukabumi 2 and 4 m (2 rows of gliricidia row spacing intercropped with king or elephant grass .

Research on cutting vibration characteristics of face-milling involute gear

Directory of Open Access Journals (Sweden)

Chengzhe JIN

2017-10-01

Full Text Available Traditional machining methods, such as gear hobbing, gear shaping and gear milling, etc, are commonly used for cutting machining of gear tooth profile, which cannot meet huge machining demand of gears to a certain extent. This article proposes to utilize a face-milling machining method in involute gear machining, which can be used to reduce production cost effectively. Cutting vibration generated during cutting machining has a direct effect on the machining accuracy and machined surface quality of workpiece. Therefore, it is desiderated to perform in-depth research regarding this issue. ADAMS software was used to establish a rigid-flexible coupling virtual prototyping model of face-milling gear milling system and a cutting vibration system model. Cutting vibration analysis was performed for face-milling gear by adopting quick sine frequency sweep method, so that the frequency response characteristics of workpiece in three directions X, Y and Z and space were acquired. The research results will provide reference and theoretical foundation for actual application of face-milling gear machining technology.

Chemical composition and methane yield of reed canary grass as influenced by harvesting time and harvest frequency.

Science.gov (United States)

Kandel, Tanka P; Sutaryo, Sutaryo; Møller, Henrik B; Jørgensen, Uffe; Lærke, Poul E

2013-02-01

This study examined the influence of harvest time on biomass yield, dry matter partitioning, biochemical composition and biological methane potential of reed canary grass harvested twice a month in one-cut (OC) management. The regrowth of biomass harvested in summer was also harvested in autumn as a two-cut management with (TC-F) or without (TC-U) fertilization after summer harvest. The specific methane yields decreased significantly with crop maturity that ranged from 384 to 315 and from 412 to 283 NL (normal litre) (kgVS)(-1) for leaf and stem, respectively. Approximately 45% more methane was produced by the TC-F management (5430Nm(3)ha(-1)) as by the OC management (3735Nm(3)ha(-1)). Specific methane yield was moderately correlated with the concentrations of fibre components in the biomass. Larger quantity of biogas produced at the beginning of the biogas assay from early harvested biomass was to some extent off-set by lower concentration of methane. Copyright © 2012 Elsevier Ltd. All rights reserved.

Energy evaluation of fresh grass in the diets of lactating dairy cows

NARCIS (Netherlands)

Bruinenberg, M.H.; Zom, R.L.G.; Valk, H.

2002-01-01

The discrepancy between the estimated feeding value of fresh grass and the output per kg grass in terms of milk and maintenance was studied by evaluating 12 experiments with grass-fed dairy cows. The percentage grass in the diets varied between 40 and 90. Intake and milk production were recorded

Ecophysiological responses of native and invasive grasses to simulated warming and drought

Science.gov (United States)

Ravi, S.; Law, D. J.; Wiede, A.; Barron-Gafford, G. A.; Breshears, D. D.; Dontsova, K.; Huxman, T. E.

2011-12-01

Climate models predict that many arid regions around the world - including the North American deserts - may become affected more frequently by recurrent droughts. At the same time, these regions are experiencing rapid vegetation transformations such as invasion by exotic grasses. Thus, understanding the ecophysiological processes accompanying exotic grass invasion in the context of rising temperatures and recurrent droughts is fundamental to global change research. Under ambient and warmer (+ 4° C) conditions inside the Biosphere 2 facility, we compared the ecophysiological responses (e.g. photosynthesis, stomatal conductance, pre-dawn leaf water potential, light & CO2 response functions, biomass) of a native grass - Heteropogan contortus (Tangle head) and an invasive grass - Pennisetum ciliare (Buffel grass) growing in single and mixed communities. Further, we monitored the physiological responses and mortality of these plant communities under moisture stress conditions, simulating a global change-type-drought. The results indicate that the predicted warming scenarios may enhance the invasibility of desert landscapes by exotic grasses. In this study, buffel grass assimilated more CO2 per unit leaf area and out-competed native grasses more efficiently in a warmer environment. However, scenarios involving a combination of drought and warming proved disastrous to both the native and invasive grasses, with drought-induced grass mortality occurring at much shorter time scales under warmer conditions.

The Potential of Cellulosic Ethanol Production from Grasses in Thailand

Directory of Open Access Journals (Sweden)

Jinaporn Wongwatanapaiboon

2012-01-01

Full Text Available The grasses in Thailand were analyzed for the potentiality as the alternative energy crops for cellulosic ethanol production by biological process. The average percentage composition of cellulose, hemicellulose, and lignin in the samples of 18 types of grasses from various provinces was determined as 31.85–38.51, 31.13–42.61, and 3.10–5.64, respectively. The samples were initially pretreated with alkaline peroxide followed by enzymatic hydrolysis to investigate the enzymatic saccharification. The total reducing sugars in most grasses ranging from 500–600 mg/g grasses (70–80% yield were obtained. Subsequently, 11 types of grasses were selected as feedstocks for the ethanol production by simultaneous saccharification and cofermentation (SSCF. The enzymes, cellulase and xylanase, were utilized for hydrolysis and the yeasts, Saccharomyces cerevisiae and Pichia stipitis, were applied for cofermentation at 35°C for 7 days. From the results, the highest yield of ethanol, 1.14 g/L or 0.14 g/g substrate equivalent to 32.72% of the theoretical values was obtained from Sri Lanka ecotype vetiver grass. When the yields of dry matter were included in the calculations, Sri Lanka ecotype vetiver grass gave the yield of ethanol at 1,091.84 L/ha/year, whereas the leaves of dwarf napier grass showed the maximum yield of 2,720.55 L/ha/year (0.98 g/L or 0.12 g/g substrate equivalent to 30.60% of the theoretical values.

Characterization of aerosol particles from grass mowing by joint deployment of ToF-AMS and ATOFMS instruments

Science.gov (United States)

Drewnick, Frank; Dall'Osto, Manuel; Harrison, Roy

During a measurement campaign at a semi-urban/industrial site a grass-cutting event was observed, when the lawn in the immediate surrounding of the measurement site was mowed. Using a wide variety of state-of-the-art aerosol measurement technology allowed a broad characterization of the aerosol generated by the lawn mowing. The instrumentation included two on-line aerosol mass spectrometers: an Aerodyne Time-of-Flight Aerosol Mass Spectrometer (ToF-AMS) and a TSI Aerosol Time-of-Flight Mass Spectrometer (ATOFMS); in addition, a selection of on-line aerosol concentration and size distribution instruments (OPC, APS, SMPS, CPC, FDMS-TEOM, MAAP) was deployed. From comparison of background aerosol measurements during most of the day with the aerosol measured during the lawn mowing, the grass cutting was found to generate mainly two different types of aerosol particles: an intense ultrafine particle mode (1 h average: 4 μg m -3) of almost pure hydrocarbon-like organics and a distinct particle mode in the upper sub-micrometer size range containing particles with potassium and nitrogen-organic compounds. The ultrafine particles are probably lubricating oil particles from the lawn mower exhaust; the larger particles are swirled-up plant debris particles from the mowing process. While these particle types were identified in the data from the two mass spectrometers, the on-line aerosol concentration and size distribution data support these findings. The results presented here show that the combination of quantitative aerosol particle ensemble mass spectrometry (ToF-AMS) and single particle mass spectrometry (ATOFMS) provides much deeper insights into the nature of the aerosol properties than each of the instruments could do alone. Therefore a combined deployment of both types of instruments is strongly recommended.

Belowground ecology of scarabs feeding on grass roots: current knowledge and future directions for management in Australasia

Directory of Open Access Journals (Sweden)

Adam eFrew

2016-03-01

Full Text Available Many scarab beetles spend the majority of their lives belowground as larvae, feeding on grass roots. Many of these larvae are significant pests, causing damage to crops and grasslands. Damage by larvae of the greyback cane beetle (Dermolepida albohirtum, for example, can cause financial losses of up to AU$40 million annually to the Australian sugarcane industry. We review the ecology of some scarab larvae in Australasia, focusing on three subfamilies; Dynastinae, Rutelinae and Melolonthinae, containing key pest species. Although considerable research on the control of some scarab pests has been carried out in Australasia, for some species, the basic biology and ecology remains largely unexplored. We synthesize what is known about these scarab larvae and outline key knowledge gaps to highlights future research directions with a view to improve pest management. We do this by presenting an overview of the scarab larval host plants and feeding behavior; the impacts of abiotic (temperature, moisture and fertilization and biotic (pathogens, natural enemies and microbial symbionts factors on scarab larvae and conclude with how abiotic and biotic factors can be applied in agriculture for improved pest management, suggesting future research directions.Several host plant microbial symbionts, such as arbuscular mycorrhizal fungi and endophytes, can improve plant tolerance to scarabs and reduce larval performance, which have shown promise for use in pest management. In addition to this, several microbial scarab pathogens have been isolated for commercial use in pest management with particularly promising results. The entomopathogenic fungus Metarhizium anisopliae caused a 50% reduction in cane beetle larvae while natural enemies such as entomopathogenic nematodes have also shown potential as a biocontrol. Continued research should focus on filling the gaps in the knowledge of the basic ecology and feeding behavior of scarab larval species within Australasia

Perennial Grass Bioenergy Cropping on Wet Marginal Land

NARCIS (Netherlands)

Das, Srabani; Teuffer, Karin; Stoof, Cathelijne R.; Walter, Michael F.; Walter, M.T.; Steenhuis, Tammo S.; Richards, Brian K.

2018-01-01

The control of soil moisture, vegetation type, and prior land use on soil health parameters of perennial grass cropping systems on marginal lands is not well known. A fallow wetness-prone marginal site in New York (USA) was converted to perennial grass bioenergy feedstock production. Quadruplicate

Tensile fracture properties of seven tropical grasses at different phenological stages

NARCIS (Netherlands)

Jacobs, A.A.A.; Scheper, J.A.; Benvenutti, M.A.; Gordon, I.J.; Poppi, D.P.; Elgersma, A.

2011-01-01

The intake of forage grasses by grazing ruminants is closely related to the mechanical fracture properties of grasses. The relationship between the tensile fracture properties of grasses and foraging behaviour is of particular importance in tropical reproductive swards composed of both stems and

Determination of protein and carbohydrate fractions of Cynodon grasses in different cut age Determinação das frações de proteína e de carboidratos de gramíneas do gênero Cynodon em idades ao corte

Directory of Open Access Journals (Sweden)

Geane Dias Gonçalves

2001-05-01

Full Text Available Three Cynodon grasses (Poaceae (Tifton 85, Tifton 44 and Coast-cross harvested at ages 21, 42 and 63 days in the summer were evaluated for protein and carbohydrate fractions composition. Crude protein was divided into 5 fractions: A (non-protein nitrogen, B1 (soluble protein with fast rumen degradability, B2 (insoluble protein with intermediate rumen degradability, B3 (insoluble protein with slow rumen degradability and C (indigestible protein. Carbohydrates were divided into 3 fractions: A + B1 (fast and intermediate rumen digestibility, B2 (slow rumen digestibility and C (indigestible fiber. Experimental design consisted of a split-plot (grasses as plots and cut age as sub-plots with three repetitions. Cut age was analyzed by regression and models were chosen on the analysis of identity. There were no differences (p> 0,05 among grasses with regard to protein and carbohydrate fractions composition. C fraction of protein showed linear increase (p 1 fraction decreased (p 2 and C fractions increased (p O experimento teve por objetivos quantificar as frações de proteína e de carboidratos de três cultivares de Cynodon (Poaceae (Tifton 85, Tifton 44 e Coast-cross, colhidos com idades ao corte de 21, 42 e 63 dias no verão. Para a proteína bruta (PB, determinou-se a fração A (nitrogênio não-protéico, fração B1 (proteína solúvel de rápida degradabilidade no rúmen, fração B2 (proteína insolúvel com taxa de degradação intermediária, fração B3 (proteína com taxa de degradação lenta e fração C (proteína indigestível. Para os carboidratos, determinaram-se as frações A+B1 (frações de rápida e média degradação ruminal, fração B2 (fração lentamente degradada no rúmen e a fração C (carboidratos não digeríveis no rúmen. Utilizou-se o delineamento experimental de parcelas subdivididas (cultivares como parcelas e idade ao corte como subparcelas com três repetições. Para o fator idade ao corte, foi usada regress

Effects of rye grass coverage on soil loss from loess slopes

Directory of Open Access Journals (Sweden)

Yuequn Dong

2015-09-01

Full Text Available Vegetative coverage is commonly used to reduce urban slope soil erosion. Laboratory experimental study on soil erosion under grass covered slopes is conventionally time and space consuming. In this study, a new method is suggested to study the influences of vegetation coverage on soil erosion from a sloped loess surface under three slope gradients of 5°, 15°, and 25°; four rye grass coverages of 0%, 25%, 50%, and 75%; and three rainfall intensities of 60, 90, and 120 mm/h with a silt-loamy loess soil. Rye grasses were planted in the field with the studied soil before being transplanted into a laboratory flume. Grass was allowed to resume growth for a period before the rain simulation experiment. Results showed that the grass cover reduced soil erosion by 63.90% to 92.75% and sediment transport rate by 80.59% to 96.17% under different slope gradients and rainfall intensities. The sediment concentration/sediment transport rate from bare slope was significantly higher than from a grass-covered slope. The sediment concentration/transport rate from grass-covered slopes decreased linearly with grass coverage and increased with rainfall intensity. The sediment concentration/transport rate from the bare slope increased as a power function of slope and reached the maximum value at the gradient of about 25°, whereas that from grass-covered slope increased linearly and at much lower levels. The results of this study can be used to estimate the effect of vegetation on soil erosion from loess slopes.

Crystallographic cut that maximizes of the birefringence in photorefractive crystals

OpenAIRE

Rueda-Parada, Jorge Enrique

2017-01-01

The electro-optical birefringence effect depends on the crystal type, cut crystal, applied electric field and the incidence direction of light on the principal crystal faces. It is presented a study of maximizing the birefringence in photorefractive crystals of cubic crystallographic symmetry, in terms of these three parameters. General analytical expressions for the birefringence were obtained, from which birefringence can be established for any type of cut. A new crystallographic cut was en...

State of the art of plasma cutting in the GDR

International Nuclear Information System (INIS)

Foerster, H.; Wiese, P.

1983-01-01

In the GDR plasma cutting equipment has been developed for the power range of 3 to 100 kW. Metallic materials can be cut by machine or by hand up to a thickness of 150 mm. The great cutting velocities are of advantage since they allow coupling with the most modern directing machines. Possibilities of reducing detrimental effects of light, noise, and toxic materials by protective measures are discussed on the basis of examples

Response of itchgrass and johnson grass to asulam/dalapon combinations

International Nuclear Information System (INIS)

Hook, B.J.

1986-01-01

Activities of asumlam [methyl[(4-aminophenyl)sulfonyl]carbamate], dalapon (2,2-dichloropropionic acid) and asulam/dalapon combinations on itchgrass (Rottboellia exaltata L.f.) and johnson grass [Sorghum halepense (L.) Pers.] were examined. When metabolism of 14 C-asulam was monitored, seven days after application, 97-100% of recovered 14 C co-chromatographed with 14 C-asulam. Itchgrass exhibited rapid uptake of 14 C-asulam within 8 hr after application. Asumlam concentrations remained constant in the plant between 8 and 72 hr. Johnson grass plants showed a differential response to asulam and asulam/dalapon treatments. Asulam-treated johnson grass absorbed 26-34% 14 C within 2 hr with no future significant increase in absorption in absorption through 72 hr. Treatment of johnson grass with asulam/dalapon enhanced 14 C absorption with time. At 24 and 72 hr 14 C levels were double that absorbed from treatment of asulam alone. Movement of 14 C-asulam in the apoplast and symplast of both itchgrass and johnson grass was noted. The highest radiolabel accumulated in the lower leaves of itchgrass and remained in the treated leaf of johnson grass

Native Grass Community Management Plan for the Oak Ridge Reservation

Energy Technology Data Exchange (ETDEWEB)

Ryon, Michael G [ORNL; Parr, Patricia Dreyer [ORNL; Cohen, Kari [ORNL

2007-06-01

Land managers at the Department of Energy's Oak Ridge National Laboratory in East Tennessee are restoring native warm-season grasses and wildflowers to various sites across the Oak Ridge Reservation (ORR). Some of the numerous benefits to planting native grasses and forbs include improved habitat quality for wildlife, improved aesthetic values, lower long-term maintenance costs, and compliance with Executive Order 13112 (Clinton 1999). Challenges to restoring native plants on the ORR include the need to gain experience in establishing and maintaining these communities and the potentially greater up-front costs of getting native grasses established. The goals of the native grass program are generally outlined on a fiscal-year basis. An overview of some of the issues associated with the successful and cost-effective establishment and maintenance of native grass and wildflower stands on the ORR is presented in this report.

Grass genomes

OpenAIRE

Bennetzen, Jeffrey L.; SanMiguel, Phillip; Chen, Mingsheng; Tikhonov, Alexander; Francki, Michael; Avramova, Zoya

1998-01-01

For the most part, studies of grass genome structure have been limited to the generation of whole-genome genetic maps or the fine structure and sequence analysis of single genes or gene clusters. We have investigated large contiguous segments of the genomes of maize, sorghum, and rice, primarily focusing on intergenic spaces. Our data indicate that much (>50%) of the maize genome is composed of interspersed repetitive DNAs, primarily nested retrotransposons that in...

Anaerobic co-digestion of sewage sludge with shredded grass from public green spaces.

Science.gov (United States)

Hidaka, Taira; Arai, Sayuri; Okamoto, Seiichiro; Uchida, Tsutomu

2013-02-01

Adding greenery from public spaces to the co-digestion process with sewage sludge was evaluated by shredding experiments and laboratory-scale batch and continuous mesophilic anaerobic fermentation experiments. The ratio of the shredded grass with 20mm or less in length by a commercially available shredder was 93%. The methane production was around 0.2NL/gVS-grass in the batch experiment. The continuous experiment fed with sewage sludge and shredded grass was stably operated for 81days. The average methane production was 0.09NL/gVS-grass when the TS ratio of the sewage sludge and the grass was 10:1. This value was smaller than those of other reports using grass silage, but the grass species in this study were not managed, and the collected grass was just shredded and not ensiled before feeding to the reactor for simple operation. The addition of grass to a digester can improve the carbon/nitrogen ratio, methane production and dewaterability. Copyright © 2013 Elsevier Ltd. All rights reserved.

Assessment of some macromineral concentration of a grass/ legume ...

African Journals Online (AJOL)

Assessment of some macromineral concentration of a grass/ legume sward in ... Bulletin of Animal Health and Production in Africa ... The study aimed to determine the concentration of some macromineral elements in the grass/legume pasture ...

Environmental performance assessment of Napier grass for bioenergy production

DEFF Research Database (Denmark)

Nimmanterdwong, Prathana; Chalermsinsuwan, Benjapon; Østergård, Hanne

2017-01-01

equivalence. This idea provides the quantitative indicators involving the resource use and the percent renewability of the systems. For the proposed biorefinery model, Napier grass (Pennisetum purpureum) grown in Thailand was used as lignocellulosic feedstock. An emergy assessment was performed in two parts...... cultivation and biorefinery stages. For Napier grass cultivation, most of the emergy support came from local resources in term of evapotranspiration of Napier grass (33%) and the diesel consumption during the cultivation process (21%). The emergy sustainability indicator of the cultivation was 0...

Direct Extraction of InP/GaAsSb/InP DHBT Equivalent-Circuit Elements From S-Parameters Measured at Cut-Off and Normal Bias Conditions

DEFF Research Database (Denmark)

Johansen, Tom Keinicke; Leblanc, Rémy; Poulain, Julien

2016-01-01

A unique direct parameter extraction method for the small-signal equivalent-circuit model of InP/GaAsSb/InP double heterojunction bipolar transistors (DHBTs) is presented. $S$-parameters measured at cut-off bias are used, at first, to extract the distribution factor $X_{0}$ for the base-collector......A unique direct parameter extraction method for the small-signal equivalent-circuit model of InP/GaAsSb/InP double heterojunction bipolar transistors (DHBTs) is presented. $S$-parameters measured at cut-off bias are used, at first, to extract the distribution factor $X_{0}$ for the base......-collector capacitance at zero collector current and the collector-to-emitter overlap capacitance $C_{ceo}$ present in InP DHBT devices. Low-frequency $S$-parameters measured at normal bias conditions then allows the extraction of the external access resistances $R_{bx}$, $R_{e}$, and $R_{cx}$ as well as the intrinsic...

Side Flow Effect on Surface Generation in Nano Cutting.

Science.gov (United States)

Xu, Feifei; Fang, Fengzhou; Zhang, Xiaodong

2017-12-01

The side flow of material in nano cutting is one of the most important factors that deteriorate the machined surface quality. The effects of the crystallographic orientation, feed, and the cutting tool geometry, including tool edge radius, rake angle and inclination angle, on the side flow are investigated employing molecular dynamics simulation. The results show that the stagnation region is formed in front of tool edge and it is characterized by the stagnation radius R s and stagnation height h s . The side flow is formed because the material at or under the stagnation region is extruded by the tool edge to flow to the side of the tool edge. Higher stagnation height would increase the size of the side flow. The anisotropic nature of the material which partly determines the stagnation region also influences the side flow due to the different deformation mechanism under the action of the tool edge. At different cutting directions, the size of the side flow has a great difference which would finally affect the machined surface quality. The cutting directions of {100} , {110} , and {110}  are beneficial to obtain a better surface quality with small side flow. Besides that, the side flow could be suppressed by reducing the feed and optimizing the cutting tool geometry. Cutting tool with small edge radius, large positive rake angle, and inclination angle would decrease the side flow and consequently improve the machined surface quality.

Small mammal use of native warm-season and non-native cool-season grass forage fields

Science.gov (United States)

Ryan L Klimstra,; Christopher E Moorman,; Converse, Sarah J.; Royle, J. Andrew; Craig A Harper,

2015-01-01

Recent emphasis has been put on establishing native warm-season grasses for forage production because it is thought native warm-season grasses provide higher quality wildlife habitat than do non-native cool-season grasses. However, it is not clear whether native warm-season grass fields provide better resources for small mammals than currently are available in non-native cool-season grass forage production fields. We developed a hierarchical spatially explicit capture-recapture model to compare abundance of hispid cotton rats (Sigmodon hispidus), white-footed mice (Peromyscus leucopus), and house mice (Mus musculus) among 4 hayed non-native cool-season grass fields, 4 hayed native warm-season grass fields, and 4 native warm-season grass-forb ("wildlife") fields managed for wildlife during 2 summer trapping periods in 2009 and 2010 of the western piedmont of North Carolina, USA. Cotton rat abundance estimates were greater in wildlife fields than in native warm-season grass and non-native cool-season grass fields and greater in native warm-season grass fields than in non-native cool-season grass fields. Abundances of white-footed mouse and house mouse populations were lower in wildlife fields than in native warm-season grass and non-native cool-season grass fields, but the abundances were not different between the native warm-season grass and non-native cool-season grass fields. Lack of cover following haying in non-native cool-season grass and native warm-season grass fields likely was the key factor limiting small mammal abundance, especially cotton rats, in forage fields. Retention of vegetation structure in managed forage production systems, either by alternately resting cool-season and warm-season grass forage fields or by leaving unharvested field borders, should provide refugia for small mammals during haying events.

Comparative study of 0° X-cut and Y + 36°-cut lithium niobate high-voltage sensing

International Nuclear Information System (INIS)

Patel, N.; Branch, D. W.; Cular, S.; Schamiloglu, E.

2015-01-01

A comparison study between Y + 36° and 0° X-cut lithium niobate (LiNbO 3 ) was performed to evaluate the influence of crystal cut on the acoustic propagation to realize a piezoelectric high-voltage sensor. The acoustic time-of-flight for each crystal cut was measured when applying direct current (DC), alternating current (AC), and pulsed voltages. Results show that the voltage-induced shift in the acoustic wave propagation time scaled quadratically with voltage for DC and AC voltages applied to X-cut crystals. For the Y + 36° crystal, the voltage-induced shift scales linearly with DC voltages and quadratically with AC voltages. When applying 5 μs voltage pulses to both crystals, the voltage-induced shift scaled linearly with voltage. For the Y + 36° cut, the voltage-induced shift from applying DC voltages ranged from 10 to 54 ps and 35 to 778 ps for AC voltages at 640 V over the frequency range of 100 Hz–100 kHz. Using the same conditions as the Y + 36° cut, the 0° X-cut crystal sensed a shift of 10–273 ps for DC voltages and 189–813 ps for AC voltage application. For 5 μs voltage pulses, the 0° X-cut crystal sensed a voltage induced shift of 0.250–2 ns and the Y + 36°-cut crystal sensed a time shift of 0.115–1.6 ns. This suggests a frequency sensitive response to voltage where the influence of the crystal cut was not a significant contributor under DC, AC, or pulsed voltage conditions. The measured DC data were compared to a 1-D impedance matrix model where the predicted incremental length changed as a function of voltage. When the voltage source error was eliminated through physical modeling from the uncertainty budget, the combined uncertainty of the sensor (within a 95% confidence interval) decreased to 0.0033% using a Y + 36°-cut crystal and 0.0032% using an X-cut crystal for all the voltage conditions used in this experiment

Biological nitrate removal from synthetic wastewater using a fungal consortium in one stage bioreactors

CSIR Research Space (South Africa)

Greben, HA

2007-04-01

Full Text Available - autoclaved grass In a repeat study FR was operated for 110 d similar to the meth- odology explained above, but now grass cuttings were added on a more regular basis. Initially, 700 g grass cuttings (35 g grass/ℓ) were added to FR, whereafter 25 g grass... consortium was the sole contributor to the denitrification process occurring in FRp. The experimental period of AFRp was 129 d. The AFRp reactor initially received 100 g grass/2 ℓ (50 g grass/ℓ). Fresh grass (40 g) was added on Days 9, 28, 39, 44, 52, 56...

Agricultural field reclamation utilizing native grass crop production

Science.gov (United States)

J. Cure

2013-01-01

Developing a method of agricultural field reclamation to native grasses in the Lower San Pedro Watershed could prove to be a valuable tool for educational and practical purposes. Agricultural field reclamation utilizing native grass crop production will address water table depletion, soil degradation and the economic viability of the communities within the watershed....

Fibre laser cutting stainless steel: Fluid dynamics and cut front morphology

Science.gov (United States)

Pocorni, Jetro; Powell, John; Deichsel, Eckard; Frostevarg, Jan; Kaplan, Alexander F. H.

2017-01-01

In this paper the morphology of the laser cut front generated by fibre lasers was investigated by observation of the 'frozen' cut front, additionally high speed imaging (HSI) was employed to study the fluid dynamics on the cut front while cutting. During laser cutting the morphology and flow properties of the melt film on the cut front affect cut quality parameters such as cut edge roughness and dross (residual melt attached to the bottom of the cut edge). HSI observation of melt flow down a laser cutting front using standard cutting parameters is experimentally problematic because the cut front is narrow and surrounded by the kerf walls. To compensate for this, artificial parameters are usually chosen to obtain wide cut fronts which are unrepresentative of the actual industrial process. This paper presents a new experimental cutting geometry which permits HSI of the laser cut front using standard, commercial parameters. These results suggest that the cut front produced when cutting medium section (10 mm thick) stainless steel with a fibre laser and a nitrogen assist gas is covered in humps which themselves are covered by a thin layer of liquid. HSI observation and theoretical analysis reveal that under these conditions the humps move down the cut front at an average speed of approximately 0.4 m/s while the covering liquid flows at an average speed of approximately 1.1 m/s, with an average melt depth at the bottom of the cut zone of approximately 0.17 mm.

Impact on Clover-Grass Yield from Wheel Load and Tyre Pressure

DEFF Research Database (Denmark)

Green, Ole; Jørgensen, Rasmus Nyholm; Sørensen, Claus Aage Grøn

2009-01-01

Traffic intensities have been shown to have a negative influence on the yield of grass and clover. A full scale grass-clover field trial was established to estimate the effect on clover-grass yields as a function of different wheel loads and tire pressures. The trial comprised 16 different traffi...

Mutants of the major ryegrass pollen allergen, Lol p 5, with reduced IgE-binding capacity: candidates for grass pollen-specific immunotherapy.

Science.gov (United States)

Swoboda, Ines; De Weerd, Nicole; Bhalla, Prem L; Niederberger, Verena; Sperr, W R; Valent, Peter; Kahlert, Helga; Fiebig, Helmut; Verdino, Petra; Keller, Walter; Ebner, Christof; Spitzauer, Susanne; Valenta, Rudolf; Singh, Mohan B

2002-01-01

More than 400 million individuals are sensitized to grass pollen allergens. Group 5 allergens represent the most potent grass pollen allergens recognized by more than 80 % of grass pollen allergic patients. The aim of our study was to reduce the allergenic activity of group 5 allergens for specific immunotherapy of grass pollen allergy. Based on B- and T-cell epitope mapping studies and on sequence comparison of group 5 allergens from different grasses, point mutations were introduced by site-directed mutagenesis in highly conserved sequence domains of Lol p 5, the group 5 allergen from ryegrass. We obtained Lol p 5 mutants with low IgE-binding capacity and reduced allergenic activity as determined by basophil histamine release and by skin prick testing in allergic patients. Circular dichroism analysis showed that these mutants exhibited an overall structural fold similar to the recombinant Lol p 5 wild-type allergen. In addition, Lol p 5 mutants retained the ability to induce proliferation of group 5 allergen-specific T cell lines and clones. Our results demonstrate that a few point mutations in the Lol p 5 sequence yield mutants with reduced allergenic activity that represent potential vaccine candidates for immunotherapy of grass pollen allergy.

Identification of grazed grasses using epidermal characters | R ...

African Journals Online (AJOL)

The use of anatomical features of the abaxial epidermis of grasses is discussed for the identification of fragments of epidermis present in samples of rumen. The reliability of this technique, and the variation of the epidermal characters in two widely distributed species of grass, is given. A "Key" to identity certain genera of ...

Rehabilitation experiment by phytoremediation using lawn grass

International Nuclear Information System (INIS)

2012-08-01

Measures against environmental contamination by radioactive materials originated from the Fukushima Nuclear Accident (May, 2011), are being conducted in Fukushima and surrounding prefectures. Regarding to the measures, a phytoremediation experiment with several types of lawn grasses in a field scale have been carried out. Lawn grasses are generally characterized by shallow rhizosphere, high density and root mat formation. Decontamination effectiveness of radioactive cesium by plant uptake and by sod removing was investigated. As a result, the range of decontamination factors by plant uptake was below than 1% because of low transfer rate form soil to plant. On the other hand, maximum decontamination factor by sod removing reached about 100%. Decontamination activities with various methods will be implemented according to the national decontamination policy and related plans in each municipality. The phytoremediation method with lawn grass would be applicable in limited circumstances. (author)

Potential of grasses and rhizosphere bacteria for bioremediation of diesel-contaminated soils

Directory of Open Access Journals (Sweden)

Melissa Paola Mezzari

2011-12-01

Full Text Available The techniques available for the remediation of environmental accidents involving petroleum hydrocarbons are generally high-cost solutions. A cheaper, practical and ecologically relevant alternative is the association of plants with microorganisms that contribute to the degradation and removal of hydrocarbons from the soil. The growth of three tropical grass species (Brachiaria brizantha, Brachiaria decumbens and Paspalum notatum and the survival of root-associated bacterial communities was evaluated at different diesel oil concentrations. Seeds of three grass species were germinated in greenhouse and at different doses of diesel (0, 2.5, 5 and 10 g kg-1 soil. Plants were grown for 10 weeks with periodic assessment of germination, growth (fresh and dry weight, height, and number of bacteria in the soil (pots with or without plants. Growth and biomass of B. decumbens and P. notatum declined significantly when planted in diesel-oil contaminated soils. The presence of diesel fuel did not affect the growth of B. brizantha, which was highly tolerant to this pollutant. Bacterial growth was significant (p < 0.05 and the increase was directly proportional to the diesel dose. Bacteria growth in diesel-contaminated soils was stimulated up to 5-fold by the presence of grasses, demonstrating the positive interactions between rhizosphere and hydrocarbon-degrading bacteria in the remediation of diesel-contaminated soils.

Turbulent transfer characteristics of radioiodine effluents from air to grass

Energy Technology Data Exchange (ETDEWEB)

Markee, E. H. [ARFRO, Environmental Science Services Administration, Idaho Falls, Idaho (United States)

1967-07-01

A total of 20 controlled field releases of radioiodine have been performed at the National Reactor Testing Station in Idaho as a portion of a program to study the transmission of gaseous radioiodine through the air-vegetation-cow-milk-human chain. Most of the releases were conducted over typical pasture grasses during different wind and stability conditions. Radioiodine adherence to grass and carbon plates was measured during most of the tests. Vertical air concentration profiles and turbulence parameters were measured to determine flux characteristics. Analysis of the data reveals the complex interdisciplinary nature of transfer of radioiodine from air to a natural surface. The data are in reasonable agreement with the deposition models of Sheppard and Chamberlain when corrections for the physical and biological receptiveness of the grass and grass density are made. The average ratios of momentum to mass flux were found to be 0.9 in stable conditions and 1.4 in unstable conditions. These ratios demonstrate the effect on mass flux in the lowest 4m by a surface that acts as a partial sink for gaseous effluents. This series of releases indicates the need for further research on the biological receptiveness of grass and turbulent transfer within a grass canopy. (author)

Users' manual for fault tree analysis code: CUT-TD

International Nuclear Information System (INIS)

Watanabe, Norio; Kiyota, Mikio.

1992-06-01

The CUT-TD code has been developed to find minimal cut sets for a given fault tree and to calculate the occurrence probability of its top event. This code uses an improved top-down algorithm which can enhance the efficiency in deriving minimal cut sets. The features in processing techniques incorporated into CUT-TD are as follows: (1) Consecutive OR gates or consecutive AND gates can be coalesced into a single gate. As a result, this processing directly produces cut sets for the redefined single gate with each gate not being developed. (2) The independent subtrees are automatically identified and their respective cut sets are separately found to enhance the efficiency in processing. (3) The minimal cut sets can be obtained for the top event of a fault tree by combining their respective minimal cut sets for several gates of the fault tree. (4) The user can reduce the computing time for finding minimal cut sets and control the size and significance of cut sets by inputting a minimum probability cut off and/or a maximum order cut off. (5) The user can select events that need not to be further developed in the process of obtaining minimal cut sets. This option can reduce the number of minimal cut sets, save the computing time and assists the user in reviewing the result. (6) Computing time is monitored by the CUT-TD code so that it can prevent the running job from abnormally ending due to excessive CPU time and produce an intermediate result. The CUT-TD code has the ability to restart the calculation with use of the intermediate result. This report provides a users' manual for the CUT-TD code. (author)

Cutting state identification

International Nuclear Information System (INIS)

Berger, B.S.; Minis, I.; Rokni, M.

1997-01-01

Cutting states associated with the orthogonal cutting of stiff cylinders are identified through an analysis of the singular values of a Toeplitz matrix of third order cumulants of acceleration measurements. The ratio of the two pairs of largest singular values is shown to differentiate between light cutting, medium cutting, pre-chatter and chatter states. Sequences of cutting experiments were performed in which either depth of cut or turning frequency was varied. Two sequences of experiments with variable turning frequency and five with variable depth of cut, 42 cutting experiments in all, provided a database for the calculation of third order cumulants. Ratios of singular values of cumulant matrices find application in the analysis of control of orthogonal cutting

Sources of N2O in organic grass-clover pastures

OpenAIRE

Ambus, P.

2002-01-01

Organic farming practises, and in particular dairy production systems based on grass-clover pastures are becoming increasingly abundant within Danish agriculture. Grass-clover pastures may provide a mitigation option to reduce grassland nitrous oxide (N2O) emissions (Velthof et al. 1998). The objectives of this work was to examine the relationship between N2O emissions and transformations of inorganic N in organically managed grass-clover pastures of different ages. Results from the projec...

Management techniques for the control of Melinis minutiflora P. Beauv. (molasses grass: ten years of research on an invasive grass species in the Brazilian Cerrado

Directory of Open Access Journals (Sweden)

Carlos Romero Martins

2017-09-01

Full Text Available ABSTRACT The invasion of exotic species is considered to be a major threat to the preservation of biodiversity. In the Parque Nacional de Brasília (National Park of Brasília, the invasive Melinis minutiflora (molasses grass occupies more than 10 % of the area of the park. The present, long-term, study compared two treatments of exposure to molasses grass: 1 fire and 2 integrated management (fire + herbicide sprays + manual removal. The aerial biomass of molasses grass in the experimental area initially represented ca. 55 % of the total aerial biomass, a percentage that apparently did not influence native plant species richness at this site. Fire alone was not sufficient to control molasses grass, which attained its pre-treatment biomass values after two years. Integrated management reduced, and maintained, biomass to less than 1 % of its original value after ten years, and maintained this level throughout the study, demonstrating that it is a promising strategy for the recovery of areas invaded by molasses grass in the Cerrado. However, because of the recolonization by molasses grass, long-term monitoring efforts are targeting outbreaks, which would require immediate intervention in order to maintain the native biological diversity of the region.

Grass-specific CD4+ T-cells exhibit varying degrees of cross-reactivity, implications for allergen-specific immunotherapy

Science.gov (United States)

Archila, LD; DeLong, JH; Wambre, E; James, EA; Robinson, DM; Kwok, WW

2014-01-01

Background Conceptually, allergic responses may involve cross-reactivity by antibodies or T-cells. While IgE cross-reactivity amongst grass pollen allergens has been observed, cross-reactivity at the allergen-specific T-cell level has been less documented. Identification of the patterns of cross-reactivity may improve our understanding, allowing optimization of better immunotherapy strategies. Objectives We use Phleum pratense as model for the studying of cross-reactivity at the allergen-specific CD4+ T cell level amongst DR04:01 restricted Pooideae grass pollen T-cell epitopes. Methods After In vitro culture of blood mononucleated cells from Grass-pollen allergic subjects with specific Pooideae antigenic epitopes, dual tetramer staining with APC-labeled DR04:01/Phleum pratense tetramers and PE-labeled DR04:01/Pooideae grass homolog tetramers was assessed to identify cross-reactivity amongst allergen-specific DR04:01-restricted T-cells in 6 subjects. Direct ex vivo staining enabled the comparison of frequency and phenotype of different Pooideae grass pollen reactive T-cells. Intracellular cytokine staining (ICS) assays were also used to examine phenotypes of these T-cells. Results T-cells with various degree of cross reactive profiles could be detected. Poa p 1 97-116, Lol p 1 221-240, Lol p 5a 199-218, and Poa p 5a 199-218 were identified as minimally-cross-reactive T-cell epitopes that do not show cross reactivity to Phl p 1 and Phl p 5a epitopes. Ex vivo tetramer staining assays demonstrated T-cells that recognized these minimally-cross reactive T-cell epitopes are present in Grass-pollen allergic subjects. Conclusions Our results suggest that not all Pooideae grass epitopes with sequence homology are cross-reactive. Non-cross reactive T-cells with comparable frequency, phenotype and functionality to Phl p-specific T-cells, suggest that a multiple allergen system should be considered for immunotherapy instead of a mono allergen system. PMID:24708411

Grass-specific CD4(+) T-cells exhibit varying degrees of cross-reactivity, implications for allergen-specific immunotherapy.

Science.gov (United States)

Archila, L D; DeLong, J H; Wambre, E; James, E A; Robinson, D M; Kwok, W W

2014-07-01

Conceptually, allergic responses may involve cross-reactivity by antibodies or T-cells. While IgE cross-reactivity among grass-pollen allergens has been observed, cross-reactivity at the allergen-specific T-cell level has been less documented. Identification of the patterns of cross-reactivity may improve our understanding, allowing optimization of better immunotherapy strategies. We use Phleum pratense as model for the studying of cross-reactivity at the allergen-specific CD4(+) T cell level among DR04:01 restricted Pooideae grass-pollen T-cell epitopes. After in vitro culture of blood mono-nucleated cells from grass-pollen-allergic subjects with specific Pooideae antigenic epitopes, dual tetramer staining with APC-labelled DR04:01/Phleum pratense tetramers and PE-labelled DR04:01/Pooideae grass homolog tetramers was assessed to identify cross-reactivity among allergen-specific DR04:01-restricted T-cells in six subjects. Direct ex vivo staining enabled the comparison of frequency and phenotype of different Pooideae grass-pollen reactive T-cells. Intracellular cytokine staining (ICS) assays were also used to examine phenotypes of these T-cells. T-cells with various degrees of cross-reactive profiles could be detected. Poa p 1 97-116 , Lol p 1 221-240 , Lol p 5a 199-218 , and Poa p 5a 199-218 were identified as minimally cross-reactive T-cell epitopes that do not show cross-reactivity to Phl p 1 and Phl p 5a epitopes. Ex vivo tetramer staining assays demonstrated T-cells that recognized these minimally cross-reactive T-cell epitopes are present in Grass-pollen-allergic subjects. Our results suggest that not all Pooideae grass epitopes with sequence homology are cross-reactive. Non-cross-reactive T-cells with comparable frequency, phenotype and functionality to Phl p-specific T-cells suggest that a multiple allergen system should be considered for immunotherapy instead of a mono-allergen system. © 2014 John Wiley & Sons Ltd.

Nowcasting daily minimum air and grass temperature

Science.gov (United States)

Savage, M. J.

2016-02-01

Site-specific and accurate prediction of daily minimum air and grass temperatures, made available online several hours before their occurrence, would be of significant benefit to several economic sectors and for planning human activities. Site-specific and reasonably accurate nowcasts of daily minimum temperature several hours before its occurrence, using measured sub-hourly temperatures hours earlier in the morning as model inputs, was investigated. Various temperature models were tested for their ability to accurately nowcast daily minimum temperatures 2 or 4 h before sunrise. Temperature datasets used for the model nowcasts included sub-hourly grass and grass-surface (infrared) temperatures from one location in South Africa and air temperature from four subtropical sites varying in altitude (USA and South Africa) and from one site in central sub-Saharan Africa. Nowcast models used employed either exponential or square root functions to describe the rate of nighttime temperature decrease but inverted so as to determine the minimum temperature. The models were also applied in near real-time using an open web-based system to display the nowcasts. Extrapolation algorithms for the site-specific nowcasts were also implemented in a datalogger in an innovative and mathematically consistent manner. Comparison of model 1 (exponential) nowcasts vs measured daily minima air temperatures yielded root mean square errors (RMSEs) <1 °C for the 2-h ahead nowcasts. Model 2 (also exponential), for which a constant model coefficient ( b = 2.2) was used, was usually slightly less accurate but still with RMSEs <1 °C. Use of model 3 (square root) yielded increased RMSEs for the 2-h ahead comparisons between nowcasted and measured daily minima air temperature, increasing to 1.4 °C for some sites. For all sites for all models, the comparisons for the 4-h ahead air temperature nowcasts generally yielded increased RMSEs, <2.1 °C. Comparisons for all model nowcasts of the daily grass

Female genital cutting.

Science.gov (United States)

Perron, Liette; Senikas, Vyta; Burnett, Margaret; Davis, Victoria

2013-11-01

To strengthen the national framework for care of adolescents and women affected by female genital cutting (FGC) in Canada by providing health care professionals with: (1) information intended to strengthen their knowledge and understanding of the practice; (2) directions with regard to the legal issues related to the practice; (3) clinical guidelines for the management of obstetric and gynaecological care, including FGC related complications; and (4) guidance on the provision of culturally competent care to adolescents and women with FGC. Published literature was retrieved through searches of PubMed, CINAHL, and The Cochrane Library in September 2010 using appropriate controlled vocabulary (e.g., Circumcision, Female) and keywords (e.g., female genital mutilation, clitoridectomy, infibulation). We also searched Social Science Abstracts, Sociological Abstracts, Gender Studies Database, and ProQuest Dissertations and Theses in 2010 and 2011. There were no date or language restrictions. Searches were updated on a regular basis and incorporated in the guideline to December 2011. Grey (unpublished) literature was identified through searching the websites of health technology assessment and health technology-related agencies, clinical practice guideline collections, clinical trial registries, and national and international medical specialty societies. The quality of evidence in this document was rated using the criteria described in the Report of the Canadian Task Force on Preventive Health Care (Table 1). Summary Statements 1. Female genital cutting is internationally recognized as a harmful practice and a violation of girls' and women's rights to life, physical integrity, and health. (II-3) 2. The immediate and long-term health risks and complications of female genital cutting can be serious and life threatening. (II-3) 3. Female genital cutting continues to be practised in many countries, particularly in sub-Saharan Africa, Egypt, and Sudan. (II-3) 4. Global migration

TransCut: interactive rendering of translucent cutouts.

Science.gov (United States)

Li, Dongping; Sun, Xin; Ren, Zhong; Lin, Stephen; Tong, Yiying; Guo, Baining; Zhou, Kun

2013-03-01

We present TransCut, a technique for interactive rendering of translucent objects undergoing fracturing and cutting operations. As the object is fractured or cut open, the user can directly examine and intuitively understand the complex translucent interior, as well as edit material properties through painting on cross sections and recombining the broken pieces—all with immediate and realistic visual feedback. This new mode of interaction with translucent volumes is made possible with two technical contributions. The first is a novel solver for the diffusion equation (DE) over a tetrahedral mesh that produces high-quality results comparable to the state-of-art finite element method (FEM) of Arbree et al. but at substantially higher speeds. This accuracy and efficiency is obtained by computing the discrete divergences of the diffusion equation and constructing the DE matrix using analytic formulas derived for linear finite elements. The second contribution is a multiresolution algorithm to significantly accelerate our DE solver while adapting to the frequent changes in topological structure of dynamic objects. The entire multiresolution DE solver is highly parallel and easily implemented on the GPU. We believe TransCut provides a novel visual effect for heterogeneous translucent objects undergoing fracturing and cutting operations.

Plasma cutting or laser cutting. Plasma setsudan ka laser setsudan ka

Energy Technology Data Exchange (ETDEWEB)

Nakamura, A. (Tanaka Engineering Works Ltd., Saitama (Japan))

1991-05-01

Comparisons and discussions were made on the plasma cutting and laser cutting in sheet steel cutting, referring partly to gas cutting. Historically, the cutting has been developed from gas, plasma, and laser in that order, and currently these three methods are used mixedly. Generally, the plasma cutting is superior in cutting speed, but inferior in cut face quality, and it requires measures of dust collection. Due to high accuracy and quality in cut face, the laser cutting has been practically used for quite some time in the thin sheet industry, but medium to thick sheet cutting had a problem of unavailability of high output laser suitable for these ranges. However, the recent technologies have overcome the problem as a result of development at the authors {prime} company of a 2 kW class laser cutter capable of cutting 19 mm thick sheet. The cutter has been proven being particularly excellent in controllability. Choice of whether plasma or laser would depend upon which priority is to be taken, cost or accuracy. 15 figs., 3 tabs.

Effects of conventional and grass-feeding systems on the nutrient composition of beef.

Science.gov (United States)

Leheska, J M; Thompson, L D; Howe, J C; Hentges, E; Boyce, J; Brooks, J C; Shriver, B; Hoover, L; Miller, M F

2008-12-01

The objectives of this study were to determine the nutrient composition of grass-fed beef in the United States for inclusion in the USDA National Nutrient Database for Standard Reference, and to compare the fatty acid composition of grass-fed and conventionally fed (control) beef. Ground beef (GB) and strip steaks (SS) were collected on 3 separate occasions from 15 grass-fed beef producers that represented 13 different states, whereas control beef samples were collected from 3 regions (Ohio, South Dakota, and Texas) of the United States on 3 separate occasions. Concentrations of minerals, choline, vitamin B(12), and thiamine were determined for grass-fed beef samples. Grass-fed GB samples had less Mg, P, and K (P < 0.05), and more Na, Zn, and vitamin B(12) (P < 0.05) than SS samples. Fat color, marbling, and pH were assessed for grass-fed and control SS. Subjective evaluation of the SS indicated that grass-fed beef had fat that was more yellow in color than control beef. Percentages of total fat, total cholesterol, and fatty acids along with trans fatty acids and CLA were determined for grass-fed and control SS and GB. Grass-fed SS had less total fat than control SS (P = 0.001), but both grass-fed and control SS were considered lean, because their total fat content was 4.3% or less. For both GB and SS, grass-fed beef had significantly less (P = 0.001 and P = 0.023, respectively) content of MUFA and a greater content of SFA, n-3 fatty acids, CLA, and trans-vaccenic acid than did the control samples. Concentrations of PUFA, trans fatty acids, n-6 fatty acids, and cholesterol did not differ between grass-fed and control ground beef. Trans-vaccenic acid (trans-11 18:1) made up the greatest concentration of the total trans fats in grass-fed beef, whereas CLA accounted for approximately 15% of the total trans fats. Although the fatty acid composition of grass-fed and conventionally fed beef was different, conclusions on the possible effects of these differences on human

Biogas and Methane Yield from Rye Grass

Directory of Open Access Journals (Sweden)

Tomáš Vítěz

2015-01-01

Full Text Available Biogas production in the Czech Republic has expanded substantially, including marginal regions for maize cultivation. Therefore, there are increasingly sought materials that could partially replace maize silage, as a basic feedstock, while secure both biogas production and its quality.Two samples of rye grass (Lolium multiflorum var. westerwoldicum silage with different solids content 21% and 15% were measured for biogas and methane yield. Rye grass silage with solid content of 15% reached an average specific biogas yield 0.431 m3·kg−1 of organic dry matter and an average specific methane yield 0.249 m3·kg−1 of organic dry matter. Rye grass silage with solid content 21% reached an average specific biogas yield 0.654 m3·kg−1 of organic dry matter and an average specific methane yield 0.399 m3·kg−1 of organic dry matter.

Results from the 5-year SQ grass sublingual immunotherapy tablet asthma prevention (GAP) trial in children with grass pollen allergy

DEFF Research Database (Denmark)

Valovirta, Erkka; Petersen, Thomas H; Piotrowska, Teresa

2018-01-01

BACKGROUND: Allergy immunotherapy targets the immunological cause of allergic rhinoconjunctivitis and allergic asthma and has the potential to alter the natural course of allergic disease. OBJECTIVE: The primary objective was to investigate the effect of the SQ grass sublingual immunotherapy tablet...... compared with placebo on the risk of developing asthma. METHODS: A total of 812 children (5-12 years), with a clinically relevant history of grass pollen allergic rhinoconjunctivitis and no medical history or signs of asthma, were included in the randomized, double-blind, placebo-controlled trial......, comprising 3 years of treatment and 2 years of follow-up. RESULTS: There was no difference in time to onset of asthma, defined by prespecified asthma criteria relying on documented reversible impairment of lung function (primary endpoint). Treatment with the SQ grass sublingual immunotherapy tablet...

A novel method to characterize silica bodies in grasses.

Science.gov (United States)

Dabney, Clemon; Ostergaard, Jason; Watkins, Eric; Chen, Changbin

2016-01-01

The deposition of silicon into epidermal cells of grass species is thought to be an important mechanism that plants use as a defense against pests and environmental stresses. There are a number of techniques available to study the size, density and distribution pattern of silica bodies in grass leaves. However, none of those techniques can provide a high-throughput analysis, especially for a great number of samples. We developed a method utilizing the autofluorescence of silica bodies to investigate their size and distribution, along with the number of carbon inclusions within the silica bodies of perennial grass species Koeleria macrantha. Fluorescence images were analyzed by image software Adobe Photoshop CS5 or ImageJ that remarkably facilitated the quantification of silica bodies in the dry ash. We observed three types of silica bodies or silica body related mineral structures. Silica bodies were detected on both abaxial and adaxial epidermis of K. macrantha leaves, although their sizes, density, and distribution patterns were different. No auto-fluorescence was detected from carbon inclusions. The combination of fluorescence microscopy and image processing software displayed efficient utilization in the identification and quantification of silica bodies in K. macrantha leaf tissues, which should applicable to biological, ecological and geological studies of grasses including forage, turf grasses and cereal crops.

Genetic engineering of grass cell wall polysaccharides for biorefining.

Science.gov (United States)

Bhatia, Rakesh; Gallagher, Joe A; Gomez, Leonardo D; Bosch, Maurice

2017-09-01

Grasses represent an abundant and widespread source of lignocellulosic biomass, which has yet to fulfil its potential as a feedstock for biorefining into renewable and sustainable biofuels and commodity chemicals. The inherent recalcitrance of lignocellulosic materials to deconstruction is the most crucial limitation for the commercial viability and economic feasibility of biomass biorefining. Over the last decade, the targeted genetic engineering of grasses has become more proficient, enabling rational approaches to modify lignocellulose with the aim of making it more amenable to bioconversion. In this review, we provide an overview of transgenic strategies and targets to tailor grass cell wall polysaccharides for biorefining applications. The bioengineering efforts and opportunities summarized here rely primarily on (A) reprogramming gene regulatory networks responsible for the biosynthesis of lignocellulose, (B) remodelling the chemical structure and substitution patterns of cell wall polysaccharides and (C) expressing lignocellulose degrading and/or modifying enzymes in planta. It is anticipated that outputs from the rational engineering of grass cell wall polysaccharides by such strategies could help in realizing an economically sustainable, grass-derived lignocellulose processing industry. © 2017 The Authors. Plant Biotechnology Journal published by Society for Experimental Biology and The Association of Applied Biologists and John Wiley & Sons Ltd.

Performance of Vetiver Grass (Vetiveria zizanioides for Phytoremediation of Contaminated Water

Directory of Open Access Journals (Sweden)

Syed Hasan Sharifah Nur Munirah

2017-01-01

Full Text Available In tolerance towards metal uptake, there is a need to evaluate the performance of vetiver grass for metal removal to reduce water impurity. This study was aimed to evaluate contaminant removal by vetiver grass at varying root length and plant density and determine the metal uptake in vetiver plant biomass. Pollutant uptake of vetiver grass was conducted in laboratory experiment and heavy metal analysis was done using acid digestion and Atomic Absorption Spectrometry. Findings indicated that the removal of heavy metal was decreased in seven days of the experiment where iron shows the highest percentage (96%; 0.42 ppm of removal due to iron is highly required for growth of vetiver grass. Removal rate of heavy metals in water by vetiver grass is ranked in the order of Fe>Zn>Pb>Mn>Cu. Results also demonstrated greater removal of heavy metals (Cu, Fe, Mn, Pb, Zn at greater root length and higher density of vetiver grass because it increased the surface area for metal absorption by plant root into vetiver plant from contaminated water. However, findings indicated that accumulation of heavy metals in plant biomass was higher in vetiver shoot than in root due to metal translocation from root to the shoot. Therefore, the findings have shown effective performance of vetiver grass for metal removal in the phytoremediation of contaminated water.

Estimation of grass to cow's milk transfer coefficients for emergency situations

International Nuclear Information System (INIS)

Ujwal, P.; Karunakara, N.; Yashodhara, I.; Rao, Chetan; Kumara, Sudeep; Dileep, B.N.; Ravi, P.M.

2012-01-01

Several studies have been reported on soil to grass equilibrium transfer factors and grass to cow's milk transfer coefficients for 137 Cs for the environs of different nuclear power plants of both India and other parts of the world. In such studies, the activity concentration of 137 Cs is measured in grass collected from different places. Cow's milk samples are collected from nearby localities or from milk dairies and analyzed for 137 Cs and the grass to cow's milk transfer coefficient is estimated. In situation where 137 Cs is not present in measurable activity concentrations, its stable counterpart (Cs) is measured for the estimation of transfer coefficients. These transfer coefficient values are generally used in theoretical models to estimate the dose to the population for hypothetical situation of emergency. It should be noted that the transfer coefficients obtained for equilibrium conditions may not be totally applicable for emergency situation. However, studies aimed at evaluating transfer coefficients for emergency situations are sparse because nuclear power plants do not release 137 Cs during normal operating situations and therefore simulating situation of emergency release is not possible. Hence, the only method to estimate the grass to milk transfer coefficient for emergency situation is to spike the grass with small quantity of stable Cs. This paper reports the results of grass to milk transfer coefficients for stable isotope of Cesium (Cs) for emergency situation

Wedge cutting of mild steel by CO 2 laser and cut-quality assessment in relation to normal cutting

Science.gov (United States)

Yilbas, B. S.; Karatas, C.; Uslan, I.; Keles, O.; Usta, Y.; Yilbas, Z.; Ahsan, M.

2008-10-01

In some applications, laser cutting of wedge surfaces cannot be avoided in sheet metal processing and the quality of the end product defines the applicability of the laser-cutting process in such situations. In the present study, CO 2 laser cutting of the wedge surfaces as well as normal surfaces (normal to laser beam axis) is considered and the end product quality is assessed using the international standards for thermal cutting. The cut surfaces are examined by the optical microscopy and geometric features of the cut edges such as out of flatness and dross height are measured from the micrographs. A neural network is introduced to classify the striation patterns of the cut surfaces. It is found that the dross height and out of flatness are influenced significantly by the laser output power, particularly for wedge-cutting situation. Moreover, the cut quality improves at certain value of the laser power intensity.

Soil nitrogen mineralization not affected by grass species traits

Science.gov (United States)

Maged Ikram Nosshi; Jack Butler; M. J. Trlica

2007-01-01

Species N use traits was evaluated as a mechanism whereby Bromus inermis (Bromus), an established invasive, might alter soil N supply in a Northern mixed-grass prairie. We compared soils under stands of Bromus with those from three representative native grasses of different litter C/N: Andropogon...

Factors affecting palatability of four submerged macrophytes for grass carp Ctenopharyngodon idella.

Science.gov (United States)

Sun, Jian; Wang, Long; Ma, Lin; Min, Fenli; Huang, Tao; Zhang, Yi; Wu, Zhenbin; He, Feng

2017-12-01

Grass carp can weaken the growth and reproductive capacity of submerged macrophytes by consuming valuable tissues, but factors affecting palatability of submerged macrophytes for grass carp rarely are considered. In this study, relative consumption rate of grass carp with regard to submerged macrophytes was in the following order: Hydrilla verticillata > Vallisneria natans > Ceratophyllum demersum > Myriophyllum spicatum. Firmness of macrophytes was in the following order: M. spicatum > C. demersum > H. verticillata = V. natans, whereas shear force was M. spicatum > C. demersum > H. verticillata > V. natans. After crude extracts of M. spicatum were combined with H. verticillata, grass carp fed on fewer macrophyte pellets that contained more plant secondary metabolites (PSMs). This indicated that structure and PSMs affected palatability of macrophytes.PSMs do not contribute to reduction in palatability through inhibition of intestinal proteinases activity, but they can cause a decrease in the abundance of Exiguobacterium, Acinetobacter-yielding proteases, lipases, and cellulose activity, which in turn can weaken the metabolic capacity of grass carp and adversely affect their growth. Thus, the disadvantages to the growth and development of grass carp caused by PSMs may drive grass carp to feed on palatable submerged macrophytes with lower PSMs.

The design and development of GRASS file reservation system

International Nuclear Information System (INIS)

Huang Qiulan; Zhu Suijiang; Cheng Yaodong; Chen Gang

2010-01-01

GFRS (GRASS File Reservation System) is designed to improve the file access performance of GRASS (Grid-enabled Advanced Storage System) which is a Hierarchical Storage Management (HSM) system developed at Computing Center, Institute of High Energy Physics. GRASS can provide massive storage management and data migration, but the data migration policy is simply based factors such as pool water level, the intervals for migration and so on, so it is short of precise control over files. As for that, we design GFRS to implement user-based file reservation which is to reserve and keep the required files on disks for High Energy physicists. CFRS can improve file access speed for users by avoiding migrating frequently accessed files to tapes. In this paper we first give a brief introduction of GRASS system and then detailed architecture and implementation of GFRS. Experiments results from GFRS have shown good performance and a simple analysis is made based on it. (authors)

Designing a New Raster Sub-System for GRASS-7

Directory of Open Access Journals (Sweden)

Martin Hruby

2012-03-01

Full Text Available The paper deals with a design of a new raster sub-system intended for modern GIS systems open for client and server operation, database connection and strong application interface (API. Motivation for such a design comes from the current state of API working in GRASS 6. If found attractive, the here presented design and its implementation (referred as RG7 may be integrated to the future new generation of the GRASS Geographical Information System version 7-8. The paper describes in details the concept of raster tiling, computer storage of rasters and basic raster access procedures. Finally, the paper gives a simple benchmarking experiment of random read access to raster files imported from the Spearfish dataset. The experiment compares the early implementation of RG7 with the current implementation of rasters in GRASS 6. As the result, the experiment shows the RG7 to be significantly faster than GRASS in random read access to large raster files.

Comparative growth analysis of cool- and warm-season grasses in a cool-temperate environment

International Nuclear Information System (INIS)

Belesky, D.P.; Fedders, J.M.

1995-01-01

Using both cool-season (C3) and warm-season (C4) species is a viable means of optimizing herbage productivity over varying climatic conditions in temperate environments. Despite well-documented differences in water, N, and radiation use, no consistent evidence demonstrates productivity differences among C3 and C4 perennial grass species under identical management. A field study was conducted to determine relative growth rates (RGR), nitrogen productivity (NP), and mean radiation productivity (RP) (dry matter production as a function of incident radiation) of cool- and warm-season grasses managed identically. Results were used to identify management practices thd could lead to optimal productivity in combinations or mixtures of cool- and warm-season grasses. Dry matter yields of warm-season grasses equaled or surpassed those of cool-season grasses, despite a 40% shorter growth interval. Certain cool- and warm-season grasses appear to be suitable for use in mixtures, based on distribution of herbage production; however, actual compatibility may be altered by defoliation management. Relative growth rates varied among years and were about 40% lower for canopies clipped to a 10-cm residue height each time 20-cm of growth accumulated compared with other treatments. The RGR of warm-season grasses was twice that of cool-season grasses Nitrogen productivity (g DM g-1 N d -1) and mean radiation productivity (g DM MJ-1) for warm-season grasses was also more than twice that of cool-season grasses. Radiation productivity of cool-season grasses was dependent on N, while this was not always the case for warm-season grasses. The superior production capability of certain warm-season compared with cool-season grasses in a cool-temperate environment can be sustained under a range of defoliation treatments and demonstrates suitability for use in frequently defoliated situations

EBIPM | Finding the Tools to Manage Invasive Annual Grasses

Science.gov (United States)

management decisions for a given landscape based on ecological principles. Take a look at our video " Grass Management How much could prevention save you? Guidelines to Implement EBIPM Weed Prevention Areas Grass Facts/ID The EBIPM Model Crooked River Weed Management Area Guide Tools for Educators EBIPM High

Designing hybrid grass genomes to control runoff generation

Science.gov (United States)

MacLeod, C.; Binley, A.; Humphreys, M.; King, I. P.; O'Donovan, S.; Papadopoulos, A.; Turner, L. B.; Watts, C.; Whalley, W. R.; Haygarth, P.

2010-12-01

Sustainable management of water in landscapes requires balancing demands of agricultural production whilst moderating downstream effects like flooding. Pasture comprises 69% of global agricultural areas and is essential for producing food and fibre alongside environmental goods and services. Thus there is a need to breed forage grasses that deliver multiple benefits through increased levels of productivity whilst moderating fluxes of water. Here we show that a novel grass hybrid that combines the entire genomes of perennial ryegrass (Lolium perenne - the grass of choice for Europe’s forage agriculture) and meadow fescue (Festuca pratensis) has a significant role in flood prevention. Field plot experiments established differences in runoff generation with the hybrid cultivar reducing runoff by 50% compared to perennial ryegrass cultivar, and by 35% compared to a meadow fescue cultivar (34 events over two years, replicated randomized-block design, statistically significant differences). This important research outcome was the result of a project that combined plant genetics, soil physics and plot scale hydrology to identify novel grass genotypes that can reduce runoff from grassland systems. Through a coordinated series of experiments examining effects from the gene to plot scale, we have identified that the rapid growth and then turnover of roots in the L. perenne x F. pratensis hybrid is likely to be a key mechanism in reducing runoff generation. More broadly this is an exciting first step to realizing the potential to design grass genomes to achieve both food production, and to deliver flood control, a key ecosystem service.

DESIGN OF GRASS BRIQUETTE MACHINE

African Journals Online (AJOL)

user

E-mail addresses: 1 mike.ajieh@gmail.com, 2 dracigboanugo@yahoo.com, ... machine design was considered for processing biomass of grass origin. The machine operations include pulverization, compaction and extrusion of the briquettes.

Grass and weed killer poisoning

Science.gov (United States)

... medlineplus.gov/ency/article/002838.htm Grass and weed killer poisoning To use the sharing features on this page, please enable JavaScript. Many weed killers contain dangerous chemicals that are harmful if ...

Role of carbohydrate metabolism in grass tetany

Energy Technology Data Exchange (ETDEWEB)

Miller, J.K.; Madsen, F.C.; Lentz, D.E.; Hansard, S.L.

1977-01-01

Clinical hypomagnesemia is confined primarily to beef cattle in the United States but also occurs in dairy cattle in other countries, probably due to different management practices. During periods when grass tetany is likely, early vegetative temperate zone grasses are usually low in total readily available carbohydrates and magnesium but high in potassium and nitrogen. The tetany syndrome may include hypoglycemia and ketosis, suggesting an imbalance in intermediary energy metabolism. Many enzyme systems critical to cellular metabolism, including those which hydrolyze and transfer phosphate groups, are activated by Mg. Thus, by inference, Mg is required for normal glucose utilization, fat, protein, nucleic acid and coenzyme synthesis, muscle contraction, methyl group transfer, and sulfate, acetate, and formate activation. Numerous clinical and experimental studies suggest an intimate relationship between metabolism of Mg and that of carbohydrate, glucagon, and insulin. The objective is to review this literature and suggest ways in which these relationships might contribute to a chain of events leading to grass tetany.

IgE-binding capacity of recombinant timothy grass (Phleum pratense) pollen allergens

NARCIS (Netherlands)

Laffer, S.; Vrtala, S.; Duchêne, M.; van Ree, R.; Kraft, D.; Scheiner, O.; Valenta, R.

1994-01-01

A panel of 60 cDNA clones coding for IgE-binding proteins from timothy grass pollen was immunocharacterized with sera from 30 patients allergic to grass pollen and antibodies raised against natural grass pollen allergens. In the cases of five representative patients in whom the IgE reactivity

Interspecific sex in grass smuts and the genetic diversity of their pheromone-receptor system.

Directory of Open Access Journals (Sweden)

Ronny Kellner

2011-12-01

Full Text Available The grass smuts comprise a speciose group of biotrophic plant parasites, so-called Ustilaginaceae, which are specifically adapted to hosts of sweet grasses, the Poaceae family. Mating takes a central role in their life cycle, as it initiates parasitism by a morphological and physiological transition from saprobic yeast cells to pathogenic filaments. As in other fungi, sexual identity is determined by specific genomic regions encoding allelic variants of a pheromone-receptor (PR system and heterodimerising transcription factors. Both operate in a biphasic mating process that starts with PR-triggered recognition, directed growth of conjugation hyphae, and plasmogamy of compatible mating partners. So far, studies on the PR system of grass smuts revealed diverse interspecific compatibility and mating type determination. However, many questions concerning the specificity and evolutionary origin of the PR system remain unanswered. Combining comparative genetics and biological approaches, we report on the specificity of the PR system and its genetic diversity in 10 species spanning about 100 million years of mating type evolution. We show that three highly syntenic PR alleles are prevalent among members of the Ustilaginaceae, favouring a triallelic determination as the plesiomorphic characteristic of this group. Furthermore, the analysis of PR loci revealed increased genetic diversity of single PR locus genes compared to genes of flanking regions. Performing interspecies sex tests, we detected a high potential for hybridisation that is directly linked to pheromone signalling as known from intraspecies sex. Although the PR system seems to be optimised for intraspecific compatibility, the observed functional plasticity of the PR system increases the potential for interspecific sex, which might allow the hybrid-based genesis of newly combined host specificities.

Growth and nutritional evaluation of napier grass hybrids as forage for ruminants

Directory of Open Access Journals (Sweden)

Brian Turano

2016-09-01

Full Text Available Napier grass is a perennial, tropical C-4 grass that can produce large amounts of forage. However, low temperatures and drought stress limit its productivity and nutritive value as a forage. To overcome these limitations, pearl millet × napier grass hybrids (PMN were developed. It was hypothesized that PMN hybrids were more drought-tolerant, produced higher yields, and had higher nutritive value than napier grass varieties. The yield and nutritive value of 4 napier grass varieties (Bana grass, Mott, MB4 and N51 and 4 PMN hybrids (PMN2, PMN3, 5344 and 4604 were determined with or without irrigation in a strip plot design in Hawaii. Hybrid PMN3 outperformed napier grass varieties and the other hybrids for yield, while 5344 showed higher nutritional content and digestibility than most other grasses. Dry matter yields during the 110-day study period ranged from 10.3 to 32.1 t/ha without irrigation and 19.6 to 55.8 t/ha with irrigation, indicating that moisture stress was limiting performance in raingrown pastures. Only hybrids PMN3 and PMN2 and variety MB4 showed significant growth responses to irrigation. Further work is needed to evaluate the hybrids in a range of environments over much longer periods to determine if these preliminary results can be reproduced over the long term. Similarly, feeding studies with animals are needed to determine if the in vitro data for digestibility are reflected in superior performance for the promising hybrids.Keywords: Biomass, cattle, in vitro digestion, nutrient content, Pennisetum, tropical grasses.DOI: 10.17138/TGFT(4168-178

Evaluation of molecular basis of cross reactivity between rye and Bermuda grass pollen allergens.

Science.gov (United States)

Tiwari, Ruby; Bhalla, Prem L; Singh, Mohan B

2009-12-01

Allergenic cross reactivity between the members of the Pooids (Lolium perenne, Phleum pratense, and Poa pratensis) and Chloridoids (Cynodon dactylon and Paspalum notatum) is well established. Studies using crude extracts in the past have demonstrated limited cross reactivity between the Pooids and the Chloridoids suggesting separate diagnosis and therapy. However, little is known regarding the molecular basis for the limited cross reactivity observed between the 2 groups of grasses. The present study was undertaken to gain insights into the molecular basis of cross allergenicity between the major allergens from rye and Bermuda grass pollens. Immunoblot inhibition tests were carried out to determine the specificity of the proteins involved in cross reactivity. Crude pollen extract and bacterially expressed and purified recombinant Lol p 1and Lol p 5 from rye grass were subjected to cross inhibition experiments with crude and purified recombinant Cyn d 1 from Bermuda grass using sera from patients allergic to rye grass pollen. The immunoblot inhibition studies revealed a high degree of cross inhibition between the group 1 allergens. In contrast, a complete lack of inhibition was observed between Bermuda grass group 1 allergen rCyn d 1, and rye grass group 5 allergen rLol p 5. Crude rye grass extract strongly inhibited IgE reactivity to Bermuda grass, whereas crude Bermuda grass pollen extract showed a weaker inhibition. Our data suggests that a possible explanation for the limited cross reactivity between the Pooids and Chloridoids may, in part, be due to the absence of group 5 allergen from Chloridoid grasses. This approach of using purified proteins may be applied to better characterize the cross allergenicity patterns between different grass pollen allergens.

Grass defoliation affecting survival and growth of seedlings of ...

African Journals Online (AJOL)

Two experiments were conducted, one in the field and the other in the greenhouse, to investigate the effects of the intensity and frequency of grass defoliation on the survival and growth of Acacia karroo seedlings. In the greenhouse, seedlings growing with heavily clipped grasses had higher biomass production than those ...

Analysis of Some Heavy Metals in Grass ( Paspalum Orbiculare ...

African Journals Online (AJOL)

The increased deposition of trace metals from vehicle exhausts on plants has raised concerns about the risks of the quality of food consumed by humans since the heavy metals emitted through the exhaust by vehicles can enter food chain through deposition on grass grazed by animals. Grass (Paspalum Orbiculare) and ...

Photonic mesophases from cut rod rotators

Energy Technology Data Exchange (ETDEWEB)

Stelson, Angela C.; Liddell Watson, Chekesha M., E-mail: cml66@cornell.edu [Materials Science and Engineering, Cornell University, Ithaca, New York 14853 (United States); Avendano, Carlos [Chemical Engineering and Analytical Science, The University of Manchester, Manchester M13 9PL (United Kingdom)

2016-01-14

The photonic band properties of random rotator mesophases are calculated using supercell methods applied to cut rods on a hexagonal lattice. Inspired by the thermodynamic mesophase for anisotropic building blocks, we vary the shape factor of cut fraction for the randomly oriented basis. We find large, stable bandgaps with high gap isotropy in the inverted and direct structures as a function of cut fraction, dielectric contrast, and filling fraction. Bandgap sizes up to 34.5% are maximized at high dielectric contrast for rods separated in a matrix. The bandgaps open at dielectric contrasts as low as 2.0 for the transverse magnetic polarization and 2.25 for the transverse electric polarization. Additionally, the type of scattering that promotes the bandgap is correlated with the effect of disorder on bandgap size. Slow light properties are investigated in waveguide geometry and slowdown factors up to 5 × 10{sup 4} are found.

Whole rice bran for beef heifers raised on alexander grass pasture

Directory of Open Access Journals (Sweden)

P. R. Salvador

2016-09-01

Full Text Available The objective of this study was to evaluate the development of beef heifers exclusively fed alexander grass (Urochloa plantaginea (Link Hitch or alexander grass and whole rice meal as supplement offered from Monday to Friday. The experimental design was completely randomized, with repeated measures over time, and consisted of two treatments and three replications of area. Heifers receiving whole rice meal exhibited higher average daily gain after day 42 of pasture use and a 21% higher body weight at the end of the grazing period. The stocking rate, weight gain per area, hip height, weight-height ratio, and body condition score were similar for heifers exclusively fed alexander grass and alexander grass plus rice bran. Beef heifers raised exclusively on alexander grass from 15 to 18 months of age reached adequate body development, reproductive tract score (4.22 points and pelvic area (206.3 cm² to be bred at 18-20 months of age.

Toward Genomics-Based Breeding in C3 Cool-Season Perennial Grasses

Science.gov (United States)

Talukder, Shyamal K.; Saha, Malay C.

2017-01-01

Most important food and feed crops in the world belong to the C3 grass family. The future of food security is highly reliant on achieving genetic gains of those grasses. Conventional breeding methods have already reached a plateau for improving major crops. Genomics tools and resources have opened an avenue to explore genome-wide variability and make use of the variation for enhancing genetic gains in breeding programs. Major C3 annual cereal breeding programs are well equipped with genomic tools; however, genomic research of C3 cool-season perennial grasses is lagging behind. In this review, we discuss the currently available genomics tools and approaches useful for C3 cool-season perennial grass breeding. Along with a general review, we emphasize the discussion focusing on forage grasses that were considered orphan and have little or no genetic information available. Transcriptome sequencing and genotype-by-sequencing technology for genome-wide marker detection using next-generation sequencing (NGS) are very promising as genomics tools. Most C3 cool-season perennial grass members have no prior genetic information; thus NGS technology will enhance collinear study with other C3 model grasses like Brachypodium and rice. Transcriptomics data can be used for identification of functional genes and molecular markers, i.e., polymorphism markers and simple sequence repeats (SSRs). Genome-wide association study with NGS-based markers will facilitate marker identification for marker-assisted selection. With limited genetic information, genomic selection holds great promise to breeders for attaining maximum genetic gain of the cool-season C3 perennial grasses. Application of all these tools can ensure better genetic gains, reduce length of selection cycles, and facilitate cultivar development to meet the future demand for food and fodder. PMID:28798766

Toward Genomics-Based Breeding in C3 Cool-Season Perennial Grasses

Directory of Open Access Journals (Sweden)

Shyamal K. Talukder

2017-07-01

Full Text Available Most important food and feed crops in the world belong to the C3 grass family. The future of food security is highly reliant on achieving genetic gains of those grasses. Conventional breeding methods have already reached a plateau for improving major crops. Genomics tools and resources have opened an avenue to explore genome-wide variability and make use of the variation for enhancing genetic gains in breeding programs. Major C3 annual cereal breeding programs are well equipped with genomic tools; however, genomic research of C3 cool-season perennial grasses is lagging behind. In this review, we discuss the currently available genomics tools and approaches useful for C3 cool-season perennial grass breeding. Along with a general review, we emphasize the discussion focusing on forage grasses that were considered orphan and have little or no genetic information available. Transcriptome sequencing and genotype-by-sequencing technology for genome-wide marker detection using next-generation sequencing (NGS are very promising as genomics tools. Most C3 cool-season perennial grass members have no prior genetic information; thus NGS technology will enhance collinear study with other C3 model grasses like Brachypodium and rice. Transcriptomics data can be used for identification of functional genes and molecular markers, i.e., polymorphism markers and simple sequence repeats (SSRs. Genome-wide association study with NGS-based markers will facilitate marker identification for marker-assisted selection. With limited genetic information, genomic selection holds great promise to breeders for attaining maximum genetic gain of the cool-season C3 perennial grasses. Application of all these tools can ensure better genetic gains, reduce length of selection cycles, and facilitate cultivar development to meet the future demand for food and fodder.

Cutting thin glass by femtosecond laser ablation

Science.gov (United States)

Shin, Hyesung; Kim, Dongsik

2018-06-01

The femtosecond laser ablation process for cutting thin aluminoborosilicate glass sheets of thickness 100 μm was investigated with emphasis on effective cutting speed (Veff) and mechanical strength of diced samples. The process parameters including the laser fluence (F), overlap ratio (r) of the laser beam and polarization direction were varied at a fixed pulse repetition rate f = 1 kHz to find the optimal process condition that maximizes Veff and edge strength. A three-point bending test was performed to evaluate the front-side and back-side bending (edge) strength of the laser-cut samples. Veff was proportional to F unless r exceeded a critical value, at which excessive energy began to be delivered at the same spot. The front-side edge strength was bigger than the back-side strength because of the back-side damages such as chipping. Good edge strength, as high as ∼280 MPa (front-side) and ∼230 MPa (back-side), was obtained at F = 19 J/m2, r = 0.99, with laser polarization vertical to the cutting path.

Modelling of excess noise attnuation by grass and forest | Onuu ...

African Journals Online (AJOL)

, guinea grass (panicum maximum) and forest which comprises iroko (milicia ezcelea) and white afara (terminalia superba) trees in the ratio of 2:1 approximately. Excess noise attenuation spectra have been plotted for the grass and forest for ...

Indirect effects of an invasive annual grass on seed fates of two native perennial grass species.

Science.gov (United States)

Meyer, Susan E; Merrill, Katherine T; Allen, Phil S; Beckstead, Julie; Norte, Anna S

2014-04-01

Invasive plants exhibit both direct and indirect negative effects on recruitment of natives following invasion. We examined indirect effects of the invader Bromus tectorum (cheatgrass) on seed fates of two native grass species, Elymus elymoides and Pseudoroegneria spicata, by removing B. tectorum and by adding inoculum of the shared seed pathogen Pyrenophora semeniperda in factorial experiments at xeric and mesic field sites. We also included a supplemental watering treatment to increase emergence and also the potential for pathogen escape. We recorded emergence and survival of native seedlings and also determined the fate of unemerged seeds. At the xeric site, Pyrenophora-caused mortality was high (34%), and effects of other pathogens and failed emergence of germinants were smaller. Cheatgrass removal negatively affected both emergence (35 vs. 25%) and spring survival (69 vs. 42%). Pyrenophora-caused seed mortality increased with inoculum augmentation for both species (22 vs. 47% overall), but emergence was negatively impacted only for P. spicata (20 vs. 34%). At the mesic site, Pyrenophora-caused mortality was low (6%). Cheatgrass removal doubled emergence (26 vs. 14%). Seed mortality increased significantly with inoculum augmentation for P. spicata (12 vs. 5%) but not E. elymoides, while emergence was not significantly affected in either species. A large fraction of seeds produced germinants that failed to emerge (37%), while another large fraction (35%) was killed by other pathogens. We conclude that facilitation by cheatgrass at the xeric site but interference at the mesic site was probably mediated through litter effects that could be ameliorative or suppressive. Apparent competition between cheatgrass and native grasses could occur through Pyrenophora, especially in a xeric environment, but effects were weak or absent at emergence. This was probably because Pyrenophora attacks the same slow-germinating fraction that is subject to pre-emergence mortality from

Degradabilidade ruminal e digestibilidade intestinal da proteína de capim-elefante com três idades de corte Rumen degradability and intestinal digestibility of protein of elephant-grass at three cutting ages

Directory of Open Access Journals (Sweden)

J.P.G. Soares

2009-04-01

Full Text Available Determinaram-se a degradabilidade potencial (DP e a digestibilidade intestinal da proteína não degradada no rúmen (DIPNDR do capim-elefante em diferentes idades de rebrote (30, 45 e 60 dias e comparou-se a técnica do saco de náilon móvel (in situ com o método de três estádios (in vitro. Para tanto, utilizaram-se seis novilhos mestiços canulados no rúmen e duodeno alimentados exclusivamente com capim-elefante picado. O ensaio de degradabilidade foi realizado com amostras do capim incubadas no rúmen por 3, 6, 9, 12, 24, 48, 72, 96 e 120h. A digestibilidade intestinal foi determinada utilizando-se os resíduos de incubação por 24 horas. Na técnica in situ os resíduos em sacos de náilon foram colocados no duodeno e recuperados nas fezes. No método in vitro, os resíduos foram submetidos à digestão com HCl-pepsina-pancreatina. Em amostras de capim com idades de 30, 45 e 60 dias foram observados valores de DP da proteína de 87,5; 87,8 e 83,8%, respectivamente. A DIPNDR variou com a idade do capim e foi semelhante entre os métodos in situ e in vitro somente para o capim com 60 dias. O método in situ apresentou estimativa de digestibilidade intestinal mais coerente com as mudanças na composição química do capim-elefante decorrentes do envelhecimento.The potential degradability (PD and intestinal digestibility of ruminal escape protein (IDREP of elephant-grass at 30, 45, and 60 days of regrowth were determined and the mobile bag technique (in situ was compared to the three-stage method (in vitro. Thus, six cross-bred steers with rumen and duodenum canulas were used and fed exclusively with chopped elephant grass. The degradability trial was carried out with grass samples incubated in rumen by 3, 6, 9, 12, 24, 48, 72, 96, and 120 h. The intestinal digestibility was determined using 24-h ruminal incubation residue. In the in situ technique, residues in nylon bags were placed in duodenum and recovered in feces. In the in vitro

Effect of grass species on NDF ruminal degradability and ...

African Journals Online (AJOL)

uzivatel

Abstract. The objective of this study was to compare the ruminal degradability of neutral detergent fibre (NDF) .... Felina were evaluated in the present study. The grass was harvested from the primary growth of monocultured grasses on 19 and 26 May of 2004 and 27 May and 10 ...... Nutritional Ecology of the Ruminant.

Defoliation effects of perennial grasses – continuing confusion | DL ...

African Journals Online (AJOL)

Although an adequate knowledge of growth patterns and defoliation effects in perennial grasses is a prerequisite for the rational use of veld and pastures for animal production, our knowledge of this subject is far from adequate. The results of various physiological and clipping studies on tropical and sub-tropical grasses are ...

Seed production and establishment of western Oregon native grasses

Science.gov (United States)

Dale C. Darris

2005-01-01

It is well understood that native grasses are ecologically important and provide numerous benefits. However, unfavorable economics, low seed yields for some species, genetic issues, and a lack of experience behind the production and establishment of most western Oregon native grasses remain significant impediments for their expanded use. By necessity, adaptation of...

Measurement of emission and deposition patterns of ammonia from urine in grass swards

Science.gov (United States)

Ross, C. A.; Jarvis, S. C.

Currently, legislation is being considered to reduce NH3 emissions in the UK. The major sources of NH3 and their relative contributions are well known, however, the processes that control the rates of emission are still poorly defined. A series of wind-tunnel experiments has been carried out to determine the effects of various management practices on NH3 losses. The tunnels were modified to enable NH3 emission and subsequent deposition to the adjacent swards in the field to be measured. The wind-tunnels were used to examine the effects of herbage length, cutting and N status on rates of NH3 fluxes, which together with the prevailing environmental conditions affected the rates of NH3 emission and deposition. Results showed that between 20 and 60% of the NH3 emitted was deposited within 2 m. Compensation points of between 1.0 and 2.3 μg m-3 were calculated for the grass sward.

Grass as a C booster for manure-biogas in Estonia

DEFF Research Database (Denmark)

Pehme, Sirli; Hamelin, Lorie; Veromann, Eve

2014-01-01

The aim of this study was to assess the environmental consequences of using grass (from both unused and cultivated boreal grasslands) as a co-substrate to dairy cow manure for biogas production. Environmental impact categories assessed were global warming, acidification and nutrient enrichment...... (distinguishing between N and P). Scenarios studied were: traditional management of dairy cow manure, monodigestion of manure, manure co-digestion with reed canary grass and manure co-digestion with residual grass from semi-natural grasslands. The latter scenario showed the best environmental performance...... for the global warming category, for other categories it did not show clear benefits. Using reed canary grass specially produced for biogas purpose resulted in a climate change impact just as big as the reference manure management, mainly as a result of indirect land use changes. Increased impacts also occurred...

Reduction in clover-grass yield caused by different traffic intensities

DEFF Research Database (Denmark)

Green, Ole; Jørgensen, Rasmus Nyholm; Kristensen, Kristian

Different traffic intensities have been shown to have a negative influence on the yield of grass and clover. A full scale grass-clover field trial was established to estimate the effect on clover-grass yields as a function of different wheel loads and tire pressures. The trial comprised 16...... close to the north, south and east border of the field. No significant interactions were found between the timing of crop and soil damage as affected by wheel load and tire pressure. However, at specific times, there was a significant effect of wheel load and secondary by the tire pressure. At all...... measurement times, the yield was lower using a wheel load of 4745 kg than for a wheel load of 2865 kg.     Key words (for Electronic Reference Library) Traffic intensities, tire load/pressure, clover/grass, yield loss, ...

Napier Grass and Legume Silage for Smallholder Farmers in Coastal Kenya

International Nuclear Information System (INIS)

Muinga, R.W.; Mambo, L.C.; Bimbuzi, S.

1999-01-01

Inadequate feed during the dry season is a major cause of low dairy productivity in Kenya. Napier grass is grown by smallholder dairy farmers due to its high biomass yield especially during the rainy season when it can be ensiled to ensure feed available in the dry season.The objective of the study was to determine the silage quality of mixtures of Napier grass and Legume forages. Maize bran was used as the main source of readily available carbohydrates replacing molasses. The mixtures were compared to the conventional Napier grass/legume has higher nutritive value than silage made from Napier grass only and that maize bran could replace molasses as a source of readily available carbohydrates

Biotechnological application of sustainable biogas production through dry anaerobic digestion of Napier grass.

Science.gov (United States)

Dussadee, Natthawud; Ramaraj, Rameshprabu; Cheunbarn, Tapana

2017-05-01

Napier grass (Pennisetum purpureum), represents an interesting substrate for biogas production. The research project evaluated biogas potential production from dry anaerobic digestion of Napier grass using batch experiment. To enhance the biogas production from ensiled Napier grass, thermal and alkaline pre-treatments were performed in batch mode. Alkali hydrolysis of Napier grass was performed prior to batch dry anaerobic digestion at three different mild concentrations of sodium hydroxide (NaOH). The study results confirmed that NaOH pretreated sample produced high yield of biogas than untreated (raw) and hot water pretreated samples. Napier grass was used as the mono-substrate. The biogas composition of carbon dioxide (30.10%), methane (63.50%) and 5 ppm of H 2 S was estimated from the biogas. Therefore, fast-growing, high-yielding and organic matter-enriched of Napier grass was promising energy crop for biogas production.

ANALYSIS OF PARAMETERS AFFECTING THE QUALITY OF A CUTTING MACHINE

Directory of Open Access Journals (Sweden)

Iveta Onderová

2014-02-01

Full Text Available The quality of cutting machines is affected by several factors that can be directly or indirectly influenced by manufacturers, technicians and users of machine tools. The most critical qualitative evaluation parameters of machine tools include accuracy and stability. Investigations of accuracy and repeatable positioning accuracy were essential for the research presented in this paper. The aim was to develop and experimentally verify the design of a methodology for cutting centers aimed at achieving the desired working precision. Before working on the topic described here, it was necessary to make several scientific analyses, which are summarized in this paper. We can build on the initial working hypothesis that by improving the technological parameters (e.g. by increasing the working speed of the machine, or by improving the precision of the positioning the quality of the cutting machine will also be improved. For the purposes of our study, several investigated parameters were set affecting positioning accuracy, such as rigidity, positioning speed, etc. First, the stiffness of the portal structure of the cutting machine was analyzed. FEM analysis was used to investigate several alternative structures of the cutting machine, and also an innovative solution for beam mounting. The second step was to integrate two types of drives into the design of the cutting machine. The first drive is a classic rack and pinion drive for cutting machines. To increase (improve the working speed of the machine, linear motors were designed as an alternative drive. The portal of the cutting machine was designed for a working speed of 260mmin−1 and acceleration of 25 m. s−2. The third step was based on the results of the analysis. In collaboration with Microstep, an experimental cutting machine in a portal version was produced using linear synchronous motors driving the portal on both sides, and with direct linear metering of its position. In the fourth step, an

Prediction of 3D chip formation in the facing cutting with lathe machine using FEM

Science.gov (United States)

Prasetyo, Yudhi; Tauviqirrahman, Mohamad; Rusnaldy

2016-04-01

This paper presents the prediction of the chip formation at the machining process using a lathe machine in a more specific way focusing on facing cutting (face turning). The main purpose is to propose a new approach to predict the chip formation with the variation of the cutting directions i.e., the backward and forward direction. In addition, the interaction between stress analysis and chip formation on cutting process was also investigated. The simulations were conducted using three dimensional (3D) finite element method based on ABAQUS software with aluminum and high speed steel (HSS) as the workpiece and the tool materials, respectively. The simulation result showed that the chip resulted using a backward direction depicts a better formation than that using a conventional (forward) direction.

Trace metal analysis in sea grasses from Mexican Caribbean Coast by particle induced X-ray emission (PIXE)

International Nuclear Information System (INIS)

Solis, C.; Issac O, K.; Martinez, A.; Lavoisier, E.; Martinez, M. A.

2008-01-01

The growing urban and tourist activity in the Mexican Caribbean coasts has resulted in an increase of chemical substances, metals in particular, discharged to the coastal waters. In order to reach an adequate management and conservation of these marine ecosystems it is necessary to perform an inventory of the actual conditions that reflect the vulnerability and the level of damage. Sea-grasses are considered good biological indicators of heavy metal contamination in marine systems. The goal of this preliminary work is to evaluate the concentrations of trace metals such as Cr, Mn, Fe, Co, Cu, Zn, and Pb in Thalassia testudinum, a very common sea-grass in the Mexican Caribbean Sea. Samples were collected from several locations in the coasts of the Yucatan Peninsula: Holbox, Blanquizal and Punta Allen, areas virtually uninfluenced by anthropogenic activities. Trace elements in different part plants were determined by particle induced X-ray emission (PIXE). This is a very suitable technique since it offers a fast, accurate and multi-element analysis. Also, the analysis by PIXE can be performed directly on powdered leaves without a laborious sample preparation. The trace metal concentration determined in sea-grasses growing in Caribbean generally fall in the range of the lowest valuables reported for sea grasses from the Gulf of Mexico. The results indicate that the studied areas do not present contamination by heavy metals. (Author)

Effect of short-duration overnight cattle kraaling on grass production ...

African Journals Online (AJOL)

... grass species, such as Urochloa mosambicensis and Panicum maximum, were more abundant in abandoned kraal sites than the surrounding vegetation. We conclude that shortduration overnight cattle kraaling improves grass quality and biomass. Keywords: biomass, crude protein, diversity, fibre, nutrient hotspots ...

Conceptual model for reinforced grass on inner dike slopes

NARCIS (Netherlands)

Verhagen, H.J.; ComCoast

2005-01-01

A desk study has been carried out in order to develop a conceptual model for the erosion of inner dike slopes with reinforced grass cover. Based on the results the following can be concluded: The presence of a geosynthetic in a grass slope can be taken into account in the EPM method by increasing

Pesticide-contaminated feeds in integrated grass carp aquaculture: toxicology and bioaccumulation.

Science.gov (United States)

Pucher, J; Gut, T; Mayrhofer, R; El-Matbouli, M; Viet, P H; Ngoc, N T; Lamers, M; Streck, T; Focken, U

2014-02-19

Effects of dissolved pesticides on fish are widely described, but little is known about effects of pesticide-contaminated feeds taken up orally by fish. In integrated farms, pesticides used on crops may affect grass carp that feed on plants from these fields. In northern Vietnam, grass carp suffer seasonal mass mortalities which may be caused by pesticide-contaminated plants. To test effects of pesticide-contaminated feeds on health and bioaccumulation in grass carp, a net-cage trial was conducted with 5 differently contaminated grasses. Grass was spiked with 2 levels of trichlorfon/fenitrothion and fenobucarb. Unspiked grass was used as a control. Fish were fed at a daily rate of 20% of body mass for 10 d. The concentrations of fenitrothion and fenobucarb in pond water increased over time. Effects on fish mortality were not found. Fenobucarb in feed showed the strongest effects on fish by lowering feed uptake, deforming the liver, increasing blood glucose and reducing cholinesterase activity in blood serum, depending on feed uptake. Fenobucarb showed increased levels in flesh in all treatments, suggesting bio-concentration. Trichlorfon and fenitrothion did not significantly affect feed uptake but showed concentration-dependent reduction of cholinesterase activity and liver changes. Fenitrothion showed bioaccumulation in flesh which was dependant on feed uptake, whereas trichlorfon was only detected in very low concentrations in all treatments. Pesticide levels were all detected below the maximum residue levels in food. The pesticide-contaminated feeds tested did not cause mortality in grass carp but were associated with negative physiological responses and may increase susceptibility to diseases.

Microbiological Quality of Panicum maximum Grass Silage with Addition of Lactobacillus sp. as Starter

Science.gov (United States)

Sumarsih, S.; Sulistiyanto, B.; Utama, C. S.

2018-02-01

The aim of the research was to evaluate microbiological quality of Panicum maximum grass silage with addition Lactobacillus sp as starter. The completely randomized design was been used on this research with 4 treaments and 3 replications. The treatments were P0 ( Panicum maximum grass silage without addition Lactobacillus sp ), P1 ( Panicum maximum grass silage with 2% addition Lactobacillus sp), P2 (Panicum maximum grass silage with 4% addition Lactobacillus sp) and P3 (Panicum maximum grass silage with 6% addition Lactobacillus sp).The parameters were microbial populations of Panicum maximum grass silage (total lactic acid bacteria, total bacteria, total fungi, and Coliform bacteria. The data obtained were analyzed variance (ANOVA) and further tests performed Duncan’s Multiple Areas. The population of lactic acid bacteria was higher (PMicrobiological quality of Panicum maximum grass silage with addition Lactobacillus sp was better than no addition Lactobacillus sp.

Cosmogenic Be-7 in grass of Maamora site

International Nuclear Information System (INIS)

El-khoukhi, T.; Fidah, M.; Oublaid, B.

1994-01-01

Be-7 is one of the radionuclides produced by the nuclear reactions of protons and alpha particulates of galactic and solar cosmic rays as well as the secondary neutrons produced during those reactions. it is submitted, as soon as it is produced, to the physical and chemical laws of the environment, such as air motions or the fixing to the atmospheric aerosols. In the framework of environmental radioactivity monitoring programme of Maamora site (Morocco), samples of grass were collected, prepared and analyzed using gamma spectrometry. The preparation consists of drying and ashing the grass. The detector used is coaxial Ge HP with 20% efficiency. Samples were counted for more than 50000 s. The activity of Be-7 calculated for samples collected in 10 km around Maamora site varies between 4 and 20 Bq/g of ashed grass. 3 refs. (author)

Quantification in mass units of group 1 grass allergens by a monoclonal antibody-based sandwich ELISA.

Science.gov (United States)

Arilla, M C; Ibarrola, I; Eraso, E; Aguirre, M; Martínez, A; Asturias, J A

2001-08-01

Grass pollen extracts currently used for allergy diagnosis and immunotherapy are a complex mixture of proteins of which only a few have allergenic activity. Lol p 1 is one of the most important allergens in grass pollen extracts. To develop a two-site enzyme-linked immunosorbent assay for the quantification of Lol p 1 and other group 1 allergens from grass species, and to assess its suitability for quantifying this group of allergens. Balb/c mice immunized with recombinant Lol p 1 were used for the production of monoclonal antibodies. Screening of hybridomas was performed by direct ELISA, and selected monoclonal antibodies were immobilized on ELISA plates and incubated with samples containing group 1 allergens. Bound allergens were detected by a combination of biotinylated Lol p 1-specific monoclonal antibody and peroxidase-streptavidin conjugate. The assay is based on three Lol p 1-specific monoclonal antibodies with different epitope specificities. The optimized ELISA measured Lol p 1 concentrations ranging from 125 to 1000 ng/mL and could quantify group 1 allergen from grass species belonging to the Pooidea subfamily. The assay does not depend on anti-sera production or availability of human sera and thus reactives can be produced in unlimited amounts. This sensitive and specific Lol p 1 assay will be helpful both for quantifying the group 1 allergen content of Pooideae pollen extracts intended for clinical use and for studying cross-reactivities among pollen extracts.

Cutting forces during turning with variable depth of cut

Directory of Open Access Journals (Sweden)

M. Sadílek

2016-03-01

The proposed research for the paper is an experimental work – measuring cutting forces and monitoring of the tool wear on the cutting edge. It compares the turning where standard roughing cycle is used and the turning where the proposed roughing cycle with variable depth of cut is applied.

Direct releases to the surface and associated complementary cumulative distribution functions in the 1996 performance assessment for the Waste Isolation Pilot Plant: cuttings, cavings and spallings

International Nuclear Information System (INIS)

Berglund, J.W.; Garner, J.W.; Helton, J.C.; Johnson, J.D.; Smith, L.N.

2000-01-01

The following topics related to the treatment of cuttings, cavings and spallings releases to the surface environment in the 1996 performance assessment for the Waste Isolation Pilot Plant (WIPP) are presented: (i) mathematical description of models; (ii) uncertainty and sensitivity analysis results arising from subjective (i.e. epistemic) uncertainty for individual releases; (iii) construction of complementary cumulative distribution functions (CCDFs) arising from stochastic (i.e. aleatory) uncertainty; and (iv) uncertainty and sensitivity analysis results for CCDFs. The presented results indicate that direct releases due to cuttings, cavings and spallings do not constitute a serious threat to the effectiveness of the WIPP as a disposal facility for transuranic waste. Even when the effects of uncertain analysis inputs are taken into account, the CCDFs for cuttings, cavings and spallings releases fall substantially to the left of the boundary line specified in the US Environmental Protection Agency's standard for the geologic disposal of radioactive waste (40 CFR 191, 40 CFR 194)

Direct releases to the surface and associated complementary cumulative distribution functions in the 1996 performance assessment for the Waste Isolation Pilot Plant: Cuttings, cavings and spallings

International Nuclear Information System (INIS)

Berglund, J.W.; Garner, J.W.; Helton, Jon Craig; Johnson, J.D.; Smith, L.N.; Anderson, R.P.

2000-01-01

The following topics related to the treatment of cuttings, cavings and spallings releases to the surface environment in the 1996 performance assessment for the Waste Isolation Pilot Plant (WIPP) are presented: (1) mathematical description of models. (2) uncertainty and sensitivity analysis results arising from subjective (i.e., epistemic) uncertainty for individual releases, (3) construction of complementary cumulative distribution functions (CCDFs) arising from stochastic (i.e., aleatory) uncertainty, and (4) uncertainty and sensitivity analysis results for CCDFs. The presented results indicate that direct releases due to cuttings, cavings and spallings do not constitute a serious threat to the effectiveness of the WIPP as a disposal facility for transuranic waste. Even when the effects of uncertain analysis inputs are taken into account, the CCDFs for cuttings, cavings and spallings releases fall substantially to the left of the boundary line specified in the US Environmental Protection Agency standard for the geologic disposal of radioactive waste (40 CFR 191, 40 CFR 194)

Brassinosteroid Mediated Cell Wall Remodeling in Grasses under Abiotic Stress

Directory of Open Access Journals (Sweden)

Xiaolan Rao

2017-05-01

Full Text Available Unlike animals, plants, being sessile, cannot escape from exposure to severe abiotic stresses such as extreme temperature and water deficit. The dynamic structure of plant cell wall enables them to undergo compensatory changes, as well as maintain physical strength, with changing environments. Plant hormones known as brassinosteroids (BRs play a key role in determining cell wall expansion during stress responses. Cell wall deposition differs between grasses (Poaceae and dicots. Grass species include many important food, fiber, and biofuel crops. In this article, we focus on recent advances in BR-regulated cell wall biosynthesis and remodeling in response to stresses, comparing our understanding of the mechanisms in grass species with those in the more studied dicots. A more comprehensive understanding of BR-mediated changes in cell wall integrity in grass species will benefit the development of genetic tools to improve crop productivity, fiber quality and plant biomass recalcitrance.

Cutting Zone Temperature Identification During Machining of Nickel Alloy Inconel 718

Science.gov (United States)

Czán, Andrej; Daniš, Igor; Holubják, Jozef; Zaušková, Lucia; Czánová, Tatiana; Mikloš, Matej; Martikáň, Pavol

2017-12-01

Quality of machined surface is affected by quality of cutting process. There are many parameters, which influence on the quality of the cutting process. The cutting temperature is one of most important parameters that influence the tool life and the quality of machined surfaces. Its identification and determination is key objective in specialized machining processes such as dry machining of hard-to-machine materials. It is well known that maximum temperature is obtained in the tool rake face at the vicinity of the cutting edge. A moderate level of cutting edge temperature and a low thermal shock reduce the tool wear phenomena, and a low temperature gradient in the machined sublayer reduces the risk of high tensile residual stresses. The thermocouple method was used to measure the temperature directly in the cutting zone. An original thermocouple was specially developed for measuring of temperature in the cutting zone, surface and subsurface layers of machined surface. This paper deals with identification of temperature and temperature gradient during dry peripheral milling of Inconel 718. The measurements were used to identification the temperature gradients and to reconstruct the thermal distribution in cutting zone with various cutting conditions.

A capillary pumping device utilizing super-hydrophobic silicon grass

International Nuclear Information System (INIS)

Kung, Chun-Fei; Chang, Chien-Cheng; Chu, Chin-Chou

2011-01-01

In this study, we show that a compact silicon grass surface can be generated by utilizing the induced coupled plasma method with suitably chosen fabrication parameters. This super-hydrophobic structure suspends deionized water on top of the grass and keeps the contact angle at around 153°. The silicon grass is used to improve the driving efficiency of a capillary pumping micro-duct (without sidewalls), which is completely defined by a bottom hydrophilic stripe (adjacent to a Teflon substrate) and a fully top-covered hydrophobic Teflon surface which is coated on a glass substrate. The channel has a height of 3 µm and a width of 100 µm. In this work, the Teflon substrate is replaced with the silicon grass surface. When the fluid is flowing through the micro-duct on the stripe, the interface between the silicon grass and the hydrophilic stripe forms a stable air cushion barrier to the fluid, thus effectively reducing the frictional force. By changing only the interface with this replacement, we demonstrate that the average measured velocities of the new design show improvements of 21% and 17% in the driving efficiency over the original design for transporting deionized water and human blood, respectively. It is also shown that the measured data of the present design are closer to the values predicted by a theoretical analysis which relates the flow velocity to the contact angles, surface tension and fluid viscosity

Tree-grass interactions in savannas

CSIR Research Space (South Africa)

Scholes, RJ

1997-01-01

Full Text Available Savannas occur where trees and grasses interact to create a biome that is neither grassland nor forest. Woody and gramineous plants interact by many mechanisms, some negative (competition) and some positive (facilitation). The strength and sign...

Remote sensing of St. Augustine Decline (SAD) disease. [spectral reflectance of healthy and diseased grass

Science.gov (United States)

Odle, W. C.

1976-01-01

Laboratory and field spectral reflectance measurements of healthy and infected St. Augustine grass were made using several different instruments. Spectral differences between healthy and infected grass occured in the visible and near infrared regions. Multiband and color infrared photographs were taken of healthy and diseased turf from ground-based platforms and low altitude aircraft. Qualitative (density slicing) and quantitative (transmission densitometry) analyses revealed distinct tonal differences between healthy and St. Augustine disease (SAD) infected grass. Similar experiments are described for determining if healthy and diseased grass can be distinguished from waterstressed grass and grass deficient in either nitrogen or iron.

Diet Affects Muscle Quality and Growth Traits of Grass Carp (Ctenopharyngodon idellus): A Comparison Between Grass and Artificial Feed.

Science.gov (United States)

Zhao, Honghao; Xia, Jianguo; Zhang, Xi; He, Xugang; Li, Li; Tang, Rong; Chi, Wei; Li, Dapeng

2018-01-01

Fish muscle, the main edible parts with high protein level and low fat level, is consumed worldwide. Diet contributes greatly to fish growth performance and muscle quality. In order to elucidate the correlation between diet and muscle quality, the same batch of juvenile grass carp ( Ctenopharyngodon idellus ) were divided into two groups and fed with either grass ( Lolium perenne, Euphrasia pectinata and Sorghum sudanense ) or artificial feed, respectively. However, the different two diets didn't result in significant differences in all the detected water quality parameters (e.g., Tm, pH, DO, NH 3 /[Formula: see text]-N, [Formula: see text]-N, [Formula: see text], TN, TP, and TOC) between the two experimental groups. After a 4-month culture period, various indexes and expression of myogenic regulatory factor (MRFs) and their related genes were tested. The weight gain of the fish fed with artificial feed (AFG) was nearly 40% higher than the fish fed with grass (GFG). Significantly higher alkaline phosphatase, total cholestrol, high density cholestrol and total protein were detected in GFG as compared to AFG. GFG also showed increased hardness, resilience and shear force in texture profile analysis, with significantly bigger and compact muscle fibers in histologic slices. The fat accumulation was most serious in the abdomen muscle of AFG. Additionally, the expression levels of MyoG, MyoD, IGF - 1 , and MSTNs were higher, whereas Myf - 5, MRF4 , and IGF -2 were lower in most positional muscles of GFG as compared to AFG. Overall, these results suggested that feeding grass could promote muscle growth and development by stimulating muscle fiber hypertrophy, as well as significantly enhance the expression of CoL1A s. Feeding C. idellus with grass could also improve flesh quality by improving muscle characteristics, enhancing the production of collagen, meanthile, reducing fat accumulation and moisture in muscle, but at the cost of a slower growth.

Diet Affects Muscle Quality and Growth Traits of Grass Carp (Ctenopharyngodon idellus: A Comparison Between Grass and Artificial Feed

Directory of Open Access Journals (Sweden)

Honghao Zhao

2018-03-01

Full Text Available Fish muscle, the main edible parts with high protein level and low fat level, is consumed worldwide. Diet contributes greatly to fish growth performance and muscle quality. In order to elucidate the correlation between diet and muscle quality, the same batch of juvenile grass carp (Ctenopharyngodon idellus were divided into two groups and fed with either grass (Lolium perenne, Euphrasia pectinata and Sorghum sudanense or artificial feed, respectively. However, the different two diets didn't result in significant differences in all the detected water quality parameters (e.g., Tm, pH, DO, NH3/NH4+-N, NO3--N, NO2-, TN, TP, and TOC between the two experimental groups. After a 4-month culture period, various indexes and expression of myogenic regulatory factor (MRFs and their related genes were tested. The weight gain of the fish fed with artificial feed (AFG was nearly 40% higher than the fish fed with grass (GFG. Significantly higher alkaline phosphatase, total cholestrol, high density cholestrol and total protein were detected in GFG as compared to AFG. GFG also showed increased hardness, resilience and shear force in texture profile analysis, with significantly bigger and compact muscle fibers in histologic slices. The fat accumulation was most serious in the abdomen muscle of AFG. Additionally, the expression levels of MyoG, MyoD, IGF-1, and MSTNs were higher, whereas Myf-5, MRF4, and IGF-2 were lower in most positional muscles of GFG as compared to AFG. Overall, these results suggested that feeding grass could promote muscle growth and development by stimulating muscle fiber hypertrophy, as well as significantly enhance the expression of CoL1As. Feeding C. idellus with grass could also improve flesh quality by improving muscle characteristics, enhancing the production of collagen, meanthile, reducing fat accumulation and moisture in muscle, but at the cost of a slower growth.

Reducing tillage intensity affects the cumulative emergence dynamics of annual grass weeds in winter cereals

DEFF Research Database (Denmark)

Scherner, A; Melander, B; Jensen, P K

2017-01-01

Annual grass weeds such as Apera spica-venti and Vulpia myuros are promoted in non-inversion tillage systems and winter cereal-based crop rotations. Unsatisfactory weed control in these conditions is often associated with a poor understanding of the emergence pattern of these weed species. The aim...... with a higher total emergence seen under direct drilling, followed by pre-sowing tine cultivation and ploughing. The emergence patterns of all species were differently influenced by the tillage systems, suggesting that under direct drilling, in which these species occur simultaneously, management interventions...

Insects traversing grass-like vertical compliant beams

Science.gov (United States)

Li, Chen; Fearing, Ronald; Full, Robert

2014-03-01

Small running animals encounter many challenging terrains. These terrains can be filled with 3D, multi-component obstacles. Here, we study cockroaches (Blaberus discoidalis) moving through grass-like vertical compliant beams during escape. We created an apparatus to control and vary geometric parameters and mechanical properties of model grass including height, width, thickness, lateral and fore-aft spacings, angle, number of layers, stiffness, and damping. We observed a suite of novel locomotor behaviors not previously described on simpler 2D ground. When model grass height was >2 × body length and lateral spacing was test our hypothesis, we modified body shape by adding either a rectangular or an oval plate onto its dorsal surface, and found that P dropped by an order of magnitude and t more than doubled. Upon removal of either plate, both P and t recovered. Locomotor kinematics and geometry effectively coupled to terrain properties enables negotiation of 3D, multi-component obstacles, and provides inspiration for small robots to navigate such terrain with minimal sensing and control.

Influence of Fiber Orientation on Single-Point Cutting Fracture Behavior of Carbon-Fiber/Epoxy Prepreg Sheets

Directory of Open Access Journals (Sweden)

Yingying Wei

2015-10-01

Full Text Available The purpose of this article is to investigate the influences of carbon fibers on the fracture mechanism of carbon fibers both in macroscopic view and microscopic view by using single-point flying cutting method. Cutting tools with three different materials were used in this research, namely, PCD (polycrystalline diamond tool, CVD (chemical vapor deposition diamond thin film coated carbide tool and uncoated carbide tool. The influence of fiber orientation on the cutting force and fracture topography were analyzed and conclusions were drawn that cutting forces are not affected by cutting speeds but significantly influenced by the fiber orientation. Cutting forces presented smaller values in the fiber orientation of 0/180° and 15/165° but the highest one in 30/150°. The fracture mechanism of carbon fibers was studied in different cutting conditions such as 0° orientation angle, 90° orientation angle, orientation angles along fiber direction, and orientation angles inverse to the fiber direction. In addition, a prediction model on the cutting defects of carbon fiber reinforced plastic was established based on acoustic emission (AE signals.

Influence of Fiber Orientation on Single-Point Cutting Fracture Behavior of Carbon-Fiber/Epoxy Prepreg Sheets.

Science.gov (United States)

Wei, Yingying; An, Qinglong; Cai, Xiaojiang; Chen, Ming; Ming, Weiwei

2015-10-02

The purpose of this article is to investigate the influences of carbon fibers on the fracture mechanism of carbon fibers both in macroscopic view and microscopic view by using single-point flying cutting method. Cutting tools with three different materials were used in this research, namely, PCD (polycrystalline diamond) tool, CVD (chemical vapor deposition) diamond thin film coated carbide tool and uncoated carbide tool. The influence of fiber orientation on the cutting force and fracture topography were analyzed and conclusions were drawn that cutting forces are not affected by cutting speeds but significantly influenced by the fiber orientation. Cutting forces presented smaller values in the fiber orientation of 0/180° and 15/165° but the highest one in 30/150°. The fracture mechanism of carbon fibers was studied in different cutting conditions such as 0° orientation angle, 90° orientation angle, orientation angles along fiber direction, and orientation angles inverse to the fiber direction. In addition, a prediction model on the cutting defects of carbon fiber reinforced plastic was established based on acoustic emission (AE) signals.

Role of ammonia and biogenic amines in intake of grass silage by ruminants

NARCIS (Netherlands)

Os, van M.

1997-01-01

In Northern- and Western-Europe, grass silage is a major component in winter feeding rations for ruminants. The intake of ensiled grass is often lower than the intake of hay or the fresh grass of similar digestibility. This intake depression is attributed to the fermentation products

[Mechanisms of grass in slope erosion control in Loess sandy soil region of Northwest China].

Science.gov (United States)

Zhao, Chun-Hong; Gao, Jian-En; Xu, Zhen

2013-01-01

By adopting the method of simulated precipitation and from the viewpoint of slope hydrodynamics, in combining with the analysis of soil resistance to erosion, a quantitative study was made on the mechanisms of grass in controlling the slope erosion in the cross area of wind-water erosion in Loess Plateau of Northwest China under different combinations of rainfall intensity and slope gradient, aimed to provide basis to reveal the mechanisms of vegetation in controlling soil erosion and to select appropriate vegetation for the soil and water conservation in Loess Plateau. The grass Astragalus adsurgens with the coverage about 40% could effectively control the slope erosion. This grass had an efficiency of more than 70% in reducing sediment, and the grass root had a greater effect than grass canopy. On bare slope and on the slopes with the grass plant or only the grass root playing effect, there existed a functional relation between the flow velocity on the slopes and the rainfall intensity and slope gradient (V = DJ(0.33 i 0.5), where V is flow velocity, D is the comprehensive coefficient which varies with different underlying surfaces, i is rainfall intensity, and J is slope gradient). Both the grass root and the grass canopy could markedly decrease the flow velocity on the slopes, and increase the slope resistance, but the effect of grass root in decreasing flow velocity was greater while the effect in increasing resistance was smaller than that of grass canopy. The effect of grass root in increasing slope resistance was mainly achieved by increasing the sediment grain resistance, while the effect of canopy was mainly achieved by increasing the slope form resistance and wave resistance. The evaluation of the soil resistance to erosion by using a conceptual model of sediment generation by overland flow indicated that the critical shear stress value of bare slope and of the slopes with the grass plant or only the grass root playing effect was 0.533, 1.672 and 0

Postharvest residues from grass seed crops for bioenergy

OpenAIRE

Simić, Aleksandar; Čolić, Vladislava; Vučković, Savo; Dželetović, Željko; Bijelić, Zorica; Mandić, Violeta

2016-01-01

During grass seed production, a large amount of low forage quality biomass has been produced. Tall growing perennial grasses such as tall fescue (Festuca arundinacea L.) and Italian ryegrass (Lolium multiflorum Lam.) can be used as an alternative source for bioenergy production as they can be grown in less cultivated areas, their residues in seed production could be valuable energy source and can be potentially used as a dual purpose crop (bioenergy and forage). In this research, potentials o...

Analysis of Fusarium causing dermal toxicosis in marram grass planters

NARCIS (Netherlands)

Snijders, CHA; Samson, RA; Hoekstra, ES; Ouellet, T; Miller, JD; deRooijvanderGoes, PCEM; Baar, AJM; Dubois, AEJ; Kauffman, HF

1996-01-01

In the European coastal dunes, marram grass (Ammophila arenaria) is planted in order to control sand erosion. In the years 1986 to 1991, workers on the Wadden islands in the Netherlands planting marram grass showed lesions of skin and mucous membranes, suggesting a toxic reaction. Fusarium culmorum

Grass fields as reservoirs for polyphagous predators (Arthropoda) of aphids (Homopt., Aphididae)

DEFF Research Database (Denmark)

Gravesen, Eigil Vestergaard; Toft, Søren

1987-01-01

In a 4 ha grass field in Denmark three separate plots of 15 times 25 m were cultivated with barley. In each plot a central area of 5 times 5 m were fenced off by a plastic barrier. Thus, each plot consisted of an unfenced area, accessible for predators immigrating from the grass field, and an una......In a 4 ha grass field in Denmark three separate plots of 15 times 25 m were cultivated with barley. In each plot a central area of 5 times 5 m were fenced off by a plastic barrier. Thus, each plot consisted of an unfenced area, accessible for predators immigrating from the grass field...

Hyperspectral remote sensing techniques for grass nutrient estimations in savannah ecosystems

CSIR Research Space (South Africa)

Ramoelo, Abel

2010-03-01

Full Text Available Information on the distribution of grass quality (nutrient concentration) is crucial in understanding rangeland vitality and facilitates effective management of wildlife and livestock. The spatial distribution of grass nutrient concentration occurs...

Identification of cutting force coefficients in machining process considering cutter vibration

Science.gov (United States)

Yao, Qi; Luo, Ming; Zhang, Dinghua; Wu, Baohai

2018-03-01

Among current cutting force models, cutting force coefficients still are the foundation of predicting calculation combined with consideration of geometry engagement variation, equipment characteristics, material properties and so on. Attached with unimpeachable significance, the traditional and some novel identification methods of cutting force coefficient are still faced with trouble, including repeated onerous work, over ideal measuring condition, variation of value due to material divergence, interference from measuring units. To utilize the large amount of data from real manufacturing section, enlarge data sources and enrich cutting data base for former prediction task, a novel identification method is proposed by considering stiffness properties of the cutter-holder-spindle system in this paper. According to previously proposed studies, the direct result of cutter vibration is the form of dynamic undeformed chip thickness. This fluctuation is considered in two stages of this investigation. Firstly, a cutting force model combined with cutter vibration is established in detailed way. Then, on the foundation of modeling, a novel identification method is developed, in which the dynamic undeformed chip thickness could be obtained by using collected data. In a carefully designed experiment procedure, the reliability of model is validated by comparing predicted and measured results. Under different cutting condition and cutter stiffness, data is collected for the justification of identification method. The results showed divergence in calculated coefficients is acceptable confirming the possibility of accomplishing targets by applying this new method. In discussion, the potential directions of improvement are proposed.

Flexible Laser Metal Cutting

DEFF Research Database (Denmark)

Villumsen, Sigurd; Jørgensen, Steffen Nordahl; Kristiansen, Morten

2014-01-01

This paper describes a new flexible and fast approach to laser cutting called ROBOCUT. Combined with CAD/CAM technology, laser cutting of metal provides the flexibility to perform one-of-a-kind cutting and hereby realises mass production of customised products. Today’s laser cutting techniques...... possess, despite their wide use in industry, limitations regarding speed and geometry. Research trends point towards remote laser cutting techniques which can improve speed and geometrical freedom and hereby the competitiveness of laser cutting compared to fixed-tool-based cutting technology...... such as punching. This paper presents the concepts and preliminary test results of the ROBOCUT laser cutting technology, a technology which potentially can revolutionise laser cutting....

Crystal Orientation Effect on the Subsurface Deformation of Monocrystalline Germanium in Nanometric Cutting.

Science.gov (United States)

Lai, Min; Zhang, Xiaodong; Fang, Fengzhou

2017-12-01

Molecular dynamics simulations of nanometric cutting on monocrystalline germanium are conducted to investigate the subsurface deformation during and after nanometric cutting. The continuous random network model of amorphous germanium is established by molecular dynamics simulation, and its characteristic parameters are extracted to compare with those of the machined deformed layer. The coordination number distribution and radial distribution function (RDF) show that the machined surface presents the similar amorphous state. The anisotropic subsurface deformation is studied by nanometric cutting on the (010), (101), and (111) crystal planes of germanium, respectively. The deformed structures are prone to extend along the 110 slip system, which leads to the difference in the shape and thickness of the deformed layer on various directions and crystal planes. On machined surface, the greater thickness of subsurface deformed layer induces the greater surface recovery height. In order to get the critical thickness limit of deformed layer on machined surface of germanium, the optimized cutting direction on each crystal plane is suggested according to the relevance of the nanometric cutting to the nanoindentation.

Photoluminescent carbogenic nanoparticles directly derived from crude biomass

KAUST Repository

Krysmann, Marta J.; Kelarakis, Antonios; Giannelis, Emmanuel P.

2012-01-01

We present an environmentally benign, energy efficient and readily scalable approach to synthesize photoluminescent carbogenic nanoparticles directly from soft tissue biomass. Our approach relies on the pyrolytic decomposition of grass that gives

Bioenergy production from roadside grass

DEFF Research Database (Denmark)

Meyer, Ane Katharina Paarup; Ehimen, Ehiazesebhor Augustine; Holm-Nielsen, Jens Bo

2014-01-01

This paper presents a study of the feasibility of utilising roadside vegetation for biogas production in Denmark. The potential biomass yield, methane yields, and the energy balances of using roadside grass for biogas production was investigated based on spatial analysis. The results show...

Preemergence herbicides on weed control in elephant grass pasture

Directory of Open Access Journals (Sweden)

Alexandre Magno Brighenti

Full Text Available ABSTRACT Elephant grass (Pennisetum purpureum Schum. is an important forage crop that has been proposed as a potential feedstock for bioenergy production. However, weed interference is a major factor limiting elephant grass production. Field experiments were conducted in 2014 and 2015 to evaluate preemergence herbicides for selective weed control in an elephant grass pasture. Herbicide treatments included atrazine + S-metolachlor, atrazine + simazine, ametryn, ethoxysulfuron, S-metolachlor, diuron + hexazinone, sulfentrazone, imazethapyr, and atrazine at label use rates. Weedy and weed-free treatments were included. Atrazine + S-metolachlor, atrazine + simazine, ametryn, ethoxysulfuron, S-metolachlor, sulfentrazone, and atrazine did not cause phytotoxicity on elephantgrass 35 days after treatment (DAT. However, diuron + hexazinone and imazethapyr were the most phytotoxic on elephantgrass, resulting in 81 and 70% phytotoxicity in 2014, and 7 and 6% phytotoxicity in 2015 respectively 35 DAT. All treatments provided effective weed control (>81% with the exception of ethoxysulfuron (0 and 11% in 2014 and 2015, respectively, and atrazine (59% in 2014. These results show that atrazine + S-metolachlor, atrazine + simazine, ametryn, ethoxysulfuron, S-metolachlor, sulfentrazone, and atrazine were selectives when applied in preemergence in elephant grass pasture.

Pampas Grass - Orange Co. [ds351

Data.gov (United States)

California Natural Resource Agency — This dataset provides the known distribution of pampas grass (Cortaderia selloana) in southern Orange County. The surveys were conducted from May to June, 2007 and...

Some possibilities for determining cutting data when using laser cutting:

OpenAIRE

Radovanović, Miroslav

2006-01-01

The technological problems faced in the field of the application of laser-cutting machines lie in insufficient knowledge of the laser technique and the absence of both sufficiently reliable practical data and knowledge about the parameters affecting the work process itself. A significant parameter that is necessary to determine and to enter in an NC-program is the cutting speed. Various authors analyze the laser-cutting process and give mathematical models where laser cutting is modeled by us...

Axial and transverse tensile properties Zr-2.5Nb pressure tube off-cuts

International Nuclear Information System (INIS)

Shah, Priti K.; Dubey, J.S.; Shriwastaw, R.S.; Balakrishnan, K.S.; Anantharaman, S.; Chakravartty, J.K.

2011-01-01

Zr-2.5Nb alloys in cold worked and stress relieved (CWSR) condition serves as pressure boundary for hot coolant in Indian Pressurized Heavy Water Reactor (IPHWR). Due to both microstructural and crystallographic anisotropy, the mechanical properties in general and fracture behavior in particular are anisotropic for this material. To understand the anisotropic mechanical behavior of the Zr-2.5Nb pressure tubes of IPHWRs, tension tests were carried out on the RAPS-2 and KAPS-2 pressure tube off-cuts. Off-cuts are the small pieces cut from the two ends of a pressure tube before installing it into the PHWR. Miniature flat tensile specimens (without applying any flattening treatment to the pressure tube) of both longitudinal (or axial) and transverse orientation were fabricated from the off-cuts. Tension tests were carried out both at room temperature and 300 deg C. The transverse specimens showed higher strength and lower elongation than that of the axial ones. The back-end off-cuts showed higher strength compared to front-end off-cuts along axial direction whereas the same is not true for transverse direction specimens. One typical plot obtained in the testing of one of the off-cut is shown. The paper will discuss about the importance of the work carried out, test specimens, test method and results obtained in detail

A review of virtual cutting methods and technology in deformable objects.

Science.gov (United States)

Wang, Monan; Ma, Yuzheng

2018-06-05

Virtual cutting of deformable objects has been a research topic for more than a decade and has been used in many areas, especially in surgery simulation. We refer to the relevant literature and briefly describe the related research. The virtual cutting method is introduced, and we discuss the benefits and limitations of these methods and explore possible research directions. Virtual cutting is a category of object deformation. It needs to represent the deformation of models in real time as accurately, robustly and efficiently as possible. To accurately represent models, the method must be able to: (1) model objects with different material properties; (2) handle collision detection and collision response; and (3) update the geometry and topology of the deformable model that is caused by cutting. Virtual cutting is widely used in surgery simulation, and research of the cutting method is important to the development of surgery simulation. Copyright © 2018 John Wiley & Sons, Ltd.

Surface texture generation during cylindrical milling in the aspect of cutting force variations

International Nuclear Information System (INIS)

Wojciechowski, S; Twardowski, P; Pelic, M

2014-01-01

The work presented here concentrates on surface texture analysis, after cylindrical milling of hardened steel. Cutting force variations occurring in the machining process have direct influence on the cutter displacements and thus on the generated surface texture. Therefore, in these experiments, the influence of active number of teeth (z c ) on the cutting force variations was investigated. Cutting forces and cutter displacements were measured during machining process (online) using, namely piezoelectric force dynamometer and 3D laser vibrometer. Surface roughness parameters were measured using stylus surface profiler. The surface roughness model including cutting parameters (f z , D) and cutting force variations was also developed. The research revealed that in cylindrical milling process, cutting force variations have immediate influence on surface texture generation

Urban Rights-of-Way as Reservoirs for Tall-Grass Prairie Plants and Butterflies

Science.gov (United States)

Leston, Lionel; Koper, Nicola

2016-03-01

Urban rights-of-way may be potential reservoirs of tall-grass prairie plants and butterflies. To determine if this is true, in 2007-2008, we conducted vegetation surveys of species richness and cover, and butterfly surveys of species richness and abundance, along 52 transmission lines and four remnant prairies in Winnipeg, Manitoba. We detected many prairie plants and butterflies within transmission lines. Some unmowed and infrequently managed transmission lines had native plant species richness and total percent cover of native plants comparable to that of similar-sized remnant tall-grass prairies in the region. Although we did not find significant differences in overall native butterfly numbers or species richness between rights-of-way and remnant prairies, we found lower numbers of some prairie butterflies along frequently mowed rights-of-way than within remnant tall-grass prairies. We also observed higher butterfly species richness along sites with more native plant species. By reducing mowing and spraying and reintroducing tall-grass prairie plants, urban rights-of-way could serve as extensive reservoirs for tall-grass prairie plants and butterflies in urban landscapes. Eventually, managing urban rights-of-way as reservoirs for tall-grass prairie plants and animals could contribute to the restoration of tall-grass prairie in the North American Midwest.

Urban Rights-of-Way as Reservoirs for Tall-Grass Prairie Plants and Butterflies.

Science.gov (United States)

Leston, Lionel; Koper, Nicola

2016-03-01

Urban rights-of-way may be potential reservoirs of tall-grass prairie plants and butterflies. To determine if this is true, in 2007-2008, we conducted vegetation surveys of species richness and cover, and butterfly surveys of species richness and abundance, along 52 transmission lines and four remnant prairies in Winnipeg, Manitoba. We detected many prairie plants and butterflies within transmission lines. Some unmowed and infrequently managed transmission lines had native plant species richness and total percent cover of native plants comparable to that of similar-sized remnant tall-grass prairies in the region. Although we did not find significant differences in overall native butterfly numbers or species richness between rights-of-way and remnant prairies, we found lower numbers of some prairie butterflies along frequently mowed rights-of-way than within remnant tall-grass prairies. We also observed higher butterfly species richness along sites with more native plant species. By reducing mowing and spraying and reintroducing tall-grass prairie plants, urban rights-of-way could serve as extensive reservoirs for tall-grass prairie plants and butterflies in urban landscapes. Eventually, managing urban rights-of-way as reservoirs for tall-grass prairie plants and animals could contribute to the restoration of tall-grass prairie in the North American Midwest.

Remote Laser Cutting of CFRP: Improvements in the Cut Surface

Science.gov (United States)

Stock, Johannes; Zaeh, Michael F.; Conrad, Markus

In the automotive industry carbon fibre reinforced plastics (CFRP) are considered as a future key material to reduce the weight of the vehicle. Therefore, capable production techniques are required to process this material in mass industry. E.g., state of the art methods for cutting are limited by the high tool wear or the feasible feed rate. Laser cutting processes are still under investigation. This paper presents detailed new studies on remote laser cutting of CFRP focusing on the influence of the material properties and the quality of the cut surface. By adding light absorbing soot particles to the resin of the matrix, the cutting process is improved and fewer defects emerge.

Enhanced precipitation variability decreases grass- and increases shrub-productivity

Science.gov (United States)

Gherardi, Laureano A.; Sala, Osvaldo E.

2015-01-01

Although projections of precipitation change indicate increases in variability, most studies of impacts of climate change on ecosystems focused on effects of changes in amount of precipitation, overlooking precipitation variability effects, especially at the interannual scale. Here, we present results from a 6-y field experiment, where we applied sequences of wet and dry years, increasing interannual precipitation coefficient of variation while maintaining a precipitation amount constant. Increased precipitation variability significantly reduced ecosystem primary production. Dominant plant-functional types showed opposite responses: perennial-grass productivity decreased by 81%, whereas shrub productivity increased by 67%. This pattern was explained by different nonlinear responses to precipitation. Grass productivity presented a saturating response to precipitation where dry years had a larger negative effect than the positive effects of wet years. In contrast, shrubs showed an increasing response to precipitation that resulted in an increase in average productivity with increasing precipitation variability. In addition, the effects of precipitation variation increased through time. We argue that the differential responses of grasses and shrubs to precipitation variability and the amplification of this phenomenon through time result from contrasting root distributions of grasses and shrubs and competitive interactions among plant types, confirmed by structural equation analysis. Under drought conditions, grasses reduce their abundance and their ability to absorb water that then is transferred to deep soil layers that are exclusively explored by shrubs. Our work addresses an understudied dimension of climate change that might lead to widespread shrub encroachment reducing the provisioning of ecosystem services to society. PMID:26417095

Multibeam Fibre Laser Cutting

DEFF Research Database (Denmark)

Olsen, Flemming Ove

The appearance of the high power high brilliance fibre laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating cutting laser, the CO2-laser. However, quality problems in fibre......-laser cutting have until now limited its application in metal cutting. In this paper the first results of proof-of-principle studies applying a new approach (patent pending) for laser cutting with high brightness short wavelength lasers will be presented. In the approach, multi beam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from 2 single mode fibre lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W of single...

Multibeam fiber laser cutting

DEFF Research Database (Denmark)

Olsen, Flemming Ove; Hansen, Klaus Schütt; Nielsen, Jakob Skov

2009-01-01

The appearance of the high power high brilliance fiber laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating Cutting laser, the CO2 laser. However, quality problems in fiber......-laser cutting have until now limited its application to metal cutting. In this paper the first results of proof-of-principle Studies applying a new approach (patent pending) for laser cutting with high brightness and short wavelength lasers will be presented. In the approach, multibeam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from two single mode fiber lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W...

A molecular identification system for grasses: a novel technology for forensic botany.

Science.gov (United States)

Ward, J; Peakall, R; Gilmore, S R; Robertson, J

2005-09-10

Our present inability to rapidly, accurately and cost-effectively identify trace botanical evidence remains the major impediment to the routine application of forensic botany. Grasses are amongst the most likely plant species encountered as forensic trace evidence and have the potential to provide links between crime scenes and individuals or other vital crime scene information. We are designing a molecular DNA-based identification system for grasses consisting of several PCR assays that, like a traditional morphological taxonomic key, provide criteria that progressively identify an unknown grass sample to a given taxonomic rank. In a prior study of DNA sequences across 20 phylogenetically representative grass species, we identified a series of potentially informative indels in the grass mitochondrial genome. In this study we designed and tested five PCR assays spanning these indels and assessed the feasibility of these assays to aid identification of unknown grass samples. We confirmed that for our control set of 20 samples, on which the design of the PCR assays was based, the five primer combinations produced the expected results. Using these PCR assays in a 'blind test', we were able to identify 25 unknown grass samples with some restrictions. Species belonging to genera represented in our control set were all correctly identified to genus with one exception. Similarly, genera belonging to tribes in the control set were correctly identified to the tribal level. Finally, for those samples for which neither the tribal or genus specific PCR assays were designed, we could confidently exclude these samples from belonging to certain tribes and genera. The results confirmed the utility of the PCR assays and the feasibility of developing a robust full-scale usable grass identification system for forensic purposes.

Cutting cleaner

International Nuclear Information System (INIS)

Elsen, R.P.H. van; Smits, M.

1991-01-01

This paper presents the results of a long term field test of the Cutting Cleaner, which is used for the treatment of wet oil contaminated cuttings (WOCC) produced when drilling with Oil Based Mud (OBM). It was concluded that it is possible to reduce the oil content of cuttings to an average of 1 - 2%. The recovered base oil can be reused to make new oil based mud

Using expansive grasses for monitoring heavy metal pollution in the vicinity of roads.

Science.gov (United States)

Vachová, Pavla; Vach, Marek; Najnarová, Eva

2017-10-01

We propose a method for monitoring heavy metal deposition in the vicinity of roads using the leaf surfaces of two expansive grass species which are greatly abundant. A principle of the proposed procedure is to minimize the number of operations in collecting and preparing samples for analysis. The monitored elements are extracted from the leaf surfaces using dilute nitric acid directly in the sample-collection bottle. The ensuing steps, then, are only to filter the extraction solution and the elemental analysis itself. The verification results indicate that the selected grasses Calamagrostis epigejos and Arrhenatherum elatius are well suited to the proposed procedure. Selected heavy metals (Zn, Cu, Pb, Ni, Cr, and Cd) in concentrations appropriate for direct determination using methods of elemental analysis can be extracted from the surface of leaves of these species collected in the vicinity of roads with medium traffic loads. Comparing the two species showed that each had a different relationship between the amounts of deposited heavy metals and distance from the road. This disparity can be explained by specific morphological properties of the two species' leaf surfaces. Due to the abundant occurrence of the two species and the method's general simplicity and ready availability, we regard the proposed approach to constitute a broadly usable and repeatable one for producing reproducible results. Copyright © 2017 Elsevier Ltd. All rights reserved.

Dichotomy in the NRT gene families of dicots and grass species.

Directory of Open Access Journals (Sweden)

Darren Plett

Full Text Available A large proportion of the nitrate (NO(3(- acquired by plants from soil is actively transported via members of the NRT families of NO(3(- transporters. In Arabidopsis, the NRT1 family has eight functionally characterised members and predominantly comprises low-affinity transporters; the NRT2 family contains seven members which appear to be high-affinity transporters; and there are two NRT3 (NAR2 family members which are known to participate in high-affinity transport. A modified reciprocal best hit (RBH approach was used to identify putative orthologues of the Arabidopsis NRT genes in the four fully sequenced grass genomes (maize, rice, sorghum, Brachypodium. We also included the poplar genome in our analysis to establish whether differences between Arabidopsis and the grasses may be generally applicable to monocots and dicots. Our analysis reveals fundamental differences between Arabidopsis and the grass species in the gene number and family structure of all three families of NRT transporters. All grass species possessed additional NRT1.1 orthologues and appear to lack NRT1.6/NRT1.7 orthologues. There is significant separation in the NRT2 phylogenetic tree between NRT2 genes from dicots and grass species. This indicates that determination of function of NRT2 genes in grass species will not be possible in cereals based simply on sequence homology to functionally characterised Arabidopsis NRT2 genes and that proper functional analysis will be required. Arabidopsis has a unique NRT3.2 gene which may be a fusion of the NRT3.1 and NRT3.2 genes present in all other species examined here. This work provides a framework for future analysis of NO(3(- transporters and NO(3(- transport in grass crop species.

Improving the energy balance of grass-based anaerobic digestion through harvesting optimization

DEFF Research Database (Denmark)

Tsapekos, Panagiotis; Kougias, Panagiotis; Egelund, H.

with a number of coarse barbs) to simultaneously mow and mechanically pretreat two different lignocellulosic substrates. Thus, ensiled meadow grass was initially examined at the first experimental set up. Regarding the second field test, an area sowed with regularly cultivated grass was harvested. In order......) protocol. The findings showed that methane production can efficiently be enhanced by mechanical pretreatment applied at the harvesting step. More specifically, the most effective treatment yielded more than 10% increase in the bioenergy production from both examined grass silages. Our study demonstrates...... that the appropriate harvester can improve the energy output by approximately 2.4 GJ/ha under optimal conditions and subsequently, the overall sustainability of grass-based AD....

Modelling nutrient concentration to determine the environmental factors influencing grass quality

CSIR Research Space (South Africa)

Dudeni-Tlhone, N

2010-10-01

Full Text Available This paper uses the spatial and the least squares (Analysis of Covariance-ANCOVA) regression methods to evaluate the important environmental factors in estimating quality grass for grazing (based on the nitrogen (N) content in grass...

Nutritive value of Tanzania grass for dairy cows under rotational grazing

Directory of Open Access Journals (Sweden)

Alberto Magno Fernandes

2014-08-01

Full Text Available A nutritional analysis of Tanzania grass (Megathyrsus maximus Jacquin cv. Tanzânia was conducted. Pasture was managed in a rotational grazing system with a 30-day resting period, three days of paddock occupation and two grazing cycles. Ten Holstein × Zebu crossbred cows were kept within a 2-ha area divided into 11 paddocks ha-1. Cows were fed 2 kg of corn meal daily and performance was evaluated by weighing the animals every 14 days and by recording milk production twice a day. Nutritional composition of the Tanzania grass was determined from forage (extrusa samples collected by esophageal fistulae from two animals. The nutritive value of Tanzania grass was estimated according to a modification of the CNCPS evaluation model. Tanzania grass supplemented with 2 kg of corn meal supplied 33.2% more net energy for lactation than required by the animals to produce 13.7 kg of milk day-1. Nevertheless, the amount of metabolizable protein met the daily protein requirement of the animals. Although the model used in the study requires adjustments, Tanzania grass has the potential to produce milk in a rotational grazing system.

Hydrologic control on the root growth of Salix cuttings at the laboratory scale

Science.gov (United States)

Bau', Valentina; Calliari, Baptiste; Perona, Paolo

2017-04-01

Riparian plant roots contribute to the ecosystem functioning and, to a certain extent, also directly affect fluvial morphodynamics, e.g. by influencing sediment transport via mechanical stabilization and trapping. There is much both scientific and engineering interest in understanding the complex interactions among riparian vegetation and river processes. For example, to investigate plant resilience to uprooting by flow, one should quantify the probability that riparian plants may be uprooted during specific flooding event. Laboratory flume experiments are of some help to this regard, but are often limited to use grass (e.g., Avena and Medicago sativa) as vegetation replicate with a number of limitations due to fundamental scaling problems. Hence, the use of small-scale real plants grown undisturbed in the actual sediment and within a reasonable time frame would be particularly helpful to obtain more realistic flume experiments. The aim of this work is to develop and tune an experimental technique to control the growth of the root vertical density distribution of small-scale Salix cuttings of different sizes and lengths. This is obtained by controlling the position of the saturated water table in the sedimentary bed according to the sediment size distribution and the cutting length. Measurements in the rhizosphere are performed by scanning and analysing the whole below-ground biomass by means of the root analysis software WinRhizo, from which root morphology statistics and the empirical vertical density distribution are obtained. The model of Tron et al. (2015) for the vertical density distribution of the below-ground biomass is used to show that experimental conditions that allow to develop the desired root density distribution can be fairly well predicted. This augments enormously the flexibility and the applicability of the proposed methodology in view of using such plants for novel flow erosion experiments. Tron, S., Perona, P., Gorla, L., Schwarz, M., Laio, F

EFFECT OF GRASS TAIWAN (Pennisetum purpureum AND RAMON (Brosimum alicastrum SILAGE SUPPLEMENTATION ON CHANGE OF BODY WEIGHT AND BLOOD VARIABLES IN COLLARED PECCARY (Pecarí tajacu IN CAPTIVITY

Directory of Open Access Journals (Sweden)

D. Borges

2014-08-01

Full Text Available In order to evaluate the weight changes, level of hematocrit and serum total protein to supplement the diet of collared peccaries (Pecari tajacu with a silage mixture of grass Taiwan (Pennisetum purpureum and Ramon (Brosimum alicastrum a voluntary consumption test was performed for five weeks. Using eleven non-pregnant adult females, with mean age of 4.5 years and weighing 19.15 kg (± 0.5 kg, two groups were formed: one of five animals which offered squash (Cucurbita pepo and corn (Zea mays, and another of six animals on a diet of squash, corn and silage at 50%. Were taken blood samples and record weight every seven days. T-student test were used to compare means of two independent samples.  There were no differences between the means of the weights and blood proteins levels of individuals. The use of a silage mixture of grass and fodder cutting is a viable option to supplement the diet of nonpregnant adult females.

Complementary DNA cloning of the major allergen Phl p I from timothy grass (Phleum pratense); recombinant Phl p I inhibits IgE binding to group I allergens from eight different grass species

NARCIS (Netherlands)

Laffer, S.; Valenta, R.; Vrtala, S.; Susani, M.; van Ree, R.; Kraft, D.; Scheiner, O.; Duchêne, M.

1994-01-01

BACKGROUND: Grass pollens, such as pollen from timothy grass (Phleum pratense), represent a major cause of type I allergy. OBJECTIVE: In this report we attempted to determine how cross-reactive allergenic components of grass pollens from different species can be represented by a minimum number of

Cutting device for spent local power range monitor

International Nuclear Information System (INIS)

Watanabe, Shigeru; Tsuji, Teruaki.

1976-01-01

Purpose: To prevent radioactive contamination of the reactor water and simplify the operation of transferring the spent local power range monitor to a pool and preparation of the space for storing the monitor in the pool by arranging it such that the monitor is cut in the reactor water and that its cut end is closed in the reactor water. Constitution: A device for clamping a spent local power range monitor disposed within the reactor core and for cutting the monitor such that the content will not be exposed are supported by support means such that they are spaced apart in the vertical direction, and the support means is suspended in the reactor water such that it is movable relative to the monitor. Thus, there is no need to mount the cutter in any separately provided support means, and there is no possibility of exposure of the content since the cut end of the monitor is closed by the outer frame. It is therefore possible to prevent contamination of the reactor water. (Horiuchi, T.)

Distribution, Diversity, and Long-Term Retention of Grass Short Interspersed Nuclear Elements (SINEs).

Science.gov (United States)

Mao, Hongliang; Wang, Hao

2017-08-01

Instances of highly conserved plant short interspersed nuclear element (SINE) families and their enrichment near genes have been well documented, but little is known about the general patterns of such conservation and enrichment and underlying mechanisms. Here, we perform a comprehensive investigation of the structure, distribution, and evolution of SINEs in the grass family by analyzing 14 grass and 5 other flowering plant genomes using comparative genomics methods. We identify 61 SINE families composed of 29,572 copies, in which 46 families are first described. We find that comparing with other grass TEs, grass SINEs show much higher level of conservation in terms of genomic retention: The origin of at least 26% families can be traced to early grass diversification and these families are among most abundant SINE families in 86% species. We find that these families show much higher level of enrichment near protein coding genes than families of relatively recent origin (51%:28%), and that 40% of all grass SINEs are near gene and the percentage is higher than other types of grass TEs. The pattern of enrichment suggests that differential removal of SINE copies in gene-poor regions plays an important role in shaping the genomic distribution of these elements. We also identify a sequence motif located at 3' SINE end which is shared in 17 families. In short, this study provides insights into structure and evolution of SINEs in the grass family. © The Author 2017. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

Laser cutting or water-jet cutting. Laser setsudan ka water-jet setsudan ka

Energy Technology Data Exchange (ETDEWEB)

Yamada, T. (Shibuya Kogyo Co. Ltd., Ishikawa (Japan))

1991-05-01

The recent spread of carbon oxide laser cutter is so startlingly fast, but at the same time, water jet cutting using ultra high pressure water stream is drawing attention as it has identical characteristics, and opens the way to cutting materials that have been hitherto difficult to cut. The authors, who are fabricators of cutters of both types, gave the comparisons and explanations on several examples referring to materials that can be cut, cutting accuracy, speed, shape and thermal effects to cut face, and running cost in detail. However, simple comparison is difficult. For instance, cutting 6 mm thick SUS sheet costs a running cost of 65 yen per meter in laser cutting, and 535 yen per meter in water jet cutting, but this situation is often reversed when other material or sheet thickness is selected. The actual situation in the sheet metal processing industry at the present time is that it uses by far more laser processing machines, and uses water jet cutters to supplement for cutting materials more difficult to cut. 10 figs., 3 tabs.

Uptake of Radium by Grass and Shrubs Grown on Mineral Heaps: A Preliminary Study

International Nuclear Information System (INIS)

Laili, Z.; Omar, M.; Yusof, M.A. Wahab; Ibrahim, M.Z.

2015-01-01

A preliminary study of the uptake of 226 Ra and 228 Ra by grass and shrubs grown on mineral heaps was carried out. Activity concentrations of 226 Ra and 228 Ra in grass and shrubs were measured using gamma spectrometry. The result showed that grass and shrubs grown on mineral heaps contained elevated levels of radium compared to grass and shrubs grown on normal soils. Thus, these plants might be used for phytoremediation of radium contaminated soil. (author)

Potential of Cogon Grass as an Oil Sorbent

OpenAIRE

Wiloso, Edi Iswanto; Barlianti, Vera; Anggraini, Irni Fitria; Hendarsyah, Hendris

2012-01-01

Experiments on the potential of Cogon grass (lmperata cylindrica), a weed harmful to other plants, for use as a low-cost and biodegradable oil sorbent were carried out under various spill conditions. Flowers of Cogon grass adsorbed much larger amount of high-viscosity lubricating oil (57.9 g-oil/g-sorbent) than that adsorbed by Peat Sorb (7.7 g-oil/g-sorbent), a commercial oilsorbent based on peat. However, the flowers adsorbed only 27.9 g of low-viscosity crude oillgsorbent. In an oil-water ...

Thermally treated grass fibers as colonizable substrate for beneficial bacterial inoculum

NARCIS (Netherlands)

Trifonova, R.D.; Postma, J.; Ketelaars, J.J.M.H.; Elsas, van J.D.

2008-01-01

This study investigates how thermally treated (i.e., torrefied) grass, a new prospective ingredient of potting soils, is colonized by microorganisms. Torrefied grass fibers (TGF) represent a specific colonizable niche, which is potentially useful to establish a beneficial microbial community that

Effects of urban grass coverage on rainfall-induced runoff in Xi'an loess region in China

Directory of Open Access Journals (Sweden)

Jing Li

2017-10-01

Full Text Available In this study, laboratory rainfall simulation experiments were conducted to investigate the regulatory effects of grass coverage on rainfall-runoff processes. A total of 80 grass blocks planted with well-grown manilagrass, together with their root systems, were sampled from an eastern suburban area of Xi'an City in the northwest arid area of China and sent to a laboratory for rainfall simulation experiments. The runoff and infiltration processes of a slope with different grass coverage ratios and vegetation patterns were analyzed. The results show that the runoff coefficient decreases with the increase of the grass coverage ratio, and the influence of grass coverage on the reduction of runoff shows a high degree of spatial variation. At a constant grass coverage ratio, as the area of grass coverage moves downward, the runoff coefficient, total runoff, and flood peak discharge gradually decrease, and the flood peak occurs later. With the increase of the grass coverage ratio, the flood peak discharge gradually decreases, and the flood peak occurs later as well. In conclusion, a high grass coverage ratio with the area of grass coverage located at the lower part of the slope will lead to satisfactory regulatory effects on rainfall-induced runoff.

Persistence of Overseeded Cool-Season Grasses in Bermudagrass Turf

OpenAIRE

Thomas Serensits; Matthew Cutulle; Jeffrey F. Derr

2011-01-01

Cool-season grass species are commonly overseeded into bermudagrass turf for winter color. When the overseeded grass persists beyond the spring; however, it becomes a weed. The ability of perennial ryegrass, Italian (annual) ryegrass, intermediate ryegrass, and hybrid bluegrass to persist in bermudagrass one year after seeding was determined. Perennial ryegrass, intermediate ryegrass, and Italian ryegrass produced acceptable ground cover in the spring after fall seeding. Hybrid bluegrass di...

Nutritional composition and in vitro digestibility of grass and legume winter (cover) crops.

Science.gov (United States)

Brown, A N; Ferreira, G; Teets, C L; Thomason, W E; Teutsch, C D

2018-03-01

In dairy farming systems, growing winter crops for forage is frequently limited to annual grasses grown in monoculture. The objectives of this study were to determine how cropping grasses alone or in mixtures with legumes affects the yield, nutritional composition, and in vitro digestibility of fresh and ensiled winter crops and the yield, nutritional composition, and in vitro digestibility of the subsequent summer crops. Experimental plots were planted with 15 different winter crops at 3 locations in Virginia. At each site, 4 plots of each treatment were planted in a randomized complete block design. The 15 treatments included 5 winter annual grasses [barley (BA), ryegrass (RG), rye (RY), triticale (TR), and wheat (WT)] in monoculture [i.e., no legumes (NO)] or with 1 of 2 winter annual legumes [crimson clover (CC) and hairy vetch (HV)]. After harvesting the winter crops, corn and forage sorghum were planted within the same plots perpendicular to the winter crop plantings. The nutritional composition and the in vitro digestibility of winter and summer crops were determined for fresh and ensiled samples. Growing grasses in mixtures with CC increased forage dry matter (DM) yield (2.84 Mg/ha), but the yield of mixtures with HV (2.47 Mg/ha) was similar to that of grasses grown in monoculture (2.40 Mg/ha). Growing grasses in mixtures with legumes increased the crude protein concentration of the fresh forage from 13.0% to 15.5% for CC and to 17.3% for HV. For neutral detergent fiber (NDF) concentrations, the interaction between grasses and legumes was significant for both fresh and ensiled forages. Growing BA, RY, and TR in mixtures with legumes decreased NDF concentrations, whereas growing RG and WT with legumes did not affect the NDF concentrations of either the fresh or the ensiled forages. Growing grasses in mixtures with legumes decreased the concentration of sugars of fresh forages relative to grasses grown in monoculture. Primarily, this decrease can be

Interaction between Vetiver Grass Roots and Completely Decomposed Volcanic Tuff under Rainfall Infiltration Conditions

Directory of Open Access Journals (Sweden)

Ling Xu

2018-01-01

Full Text Available The important role of vetiver grass roots in preventing water erosion and mass movement has been well recognized, though the detailed influence of the grass roots on soil has not been addressed. Through planting vetiver grass at the Kadoorie Farm in Hong Kong and leaving it to grow without artificial maintenance, the paper studies the influence of vetiver grass roots on soil properties and slope stability. Under the natural conditions of Hong Kong, growth of the vetiver grass roots can reach 1.1 m depth after one and a half year from planting. The percentage of grain size which is less than 0.075 mm in rooted soil is more than that of the nonrooted soil. Vetiver grass roots can reduce soil erosion by locking the finer grain. The rooted soil of high finer grain content has a relatively small permeability. As a result, the increase in water content is therefore smaller than that of nonrooted soil in the same rainfall conditions. Shear box test reveals that the vetiver grass roots significantly increased the peak cohesion of the soil from 9.3 kPa to 18.9 kPa. The combined effects of grass roots on hydrological responses and shearing strength significantly stabilize the slope in local rainfall condition.

A proteomic style approach to characterize a grass mix product reveals potential immunotherapeutic benefit.

Science.gov (United States)

Bullimore, Alan; Swan, Nicola; Alawode, Wemimo; Skinner, Murray

2011-09-01

Grass allergy immunotherapies often consist of a mix of different grass extracts, each containing several proteins of different physiochemical properties; however, the subtle contributions of each protein are difficult to elucidate. This study aimed to identify and characterize the group 1 and 5 allergens in a 13 grass extract and to standardize the extraction method. The grass pollens were extracted in isolation and pooled and also in combination and analyzed using a variety of techniques including enzyme-linked immunosorbent assay, liquid chromatog-raphy-mass spectrometry, and sodium dodecyl sulfate-polyacrylam-ide gel electrophoresis. Gold-staining and IgE immunoblotting revealed a high degree of homology of protein bands between the 13 species and the presence of a densely stained doublet at 25-35 kD along with protein bands at approximately 12.5, 17, and 50 kD. The doublet from each grass species demonstrated a high level of group 1 and 5 interspecies homology. However, there were a number of bands unique to specific grasses consistent with evolutionary change and indicative that a grass mix immunotherapeutic could be considered broad spectrum. Sodium dodecyl sulfate-polyacrylamide gel electro-phoresis and IgE immunoblotting showed all 13 grasses share a high degree of homology, particularly in terms of group 1 and 5 allergens. IgE and IgG enzyme-linked immunosorbent assay potencies were shown to be independent of extraction method.

Technology development for cutting a reactor pressure vessel using a mechanical cutting technique

International Nuclear Information System (INIS)

Watanabe, Masaaki; Miyasaka, Yasuhiko; Miyao, Hidehiko; Ooki, Arahiko; Ninomiya, Toshiaki; Koiwai, Masami

2001-01-01

On decommissioning of nuclear facilities, the thermal cutting technique such as an oxygen-acetylene gas cutting and a plasma arc cutting are generally used for cutting massive and thick steel structures in consideration with cutting speed and control performance. These techniques generate dust, smoke, aerosol and a large quantity of secondary waste. Mechanical cutting technique has an advantage of small amount of secondary waste, and the metal chips from the kerf recovered easily compared with these thermal cutting technique. The remote mechanical cutting system for highly activated RPV has been developed with the manner which achieves the safety and cost effectiveness. The development has been performed on consignment to RANDEC from the Science and Technology Agency of Japan. (author)

Developing novel farming systems: effective use of nutrients from cover crops in intensive organic farming

NARCIS (Netherlands)

Burgt, van der G.J.H.M.; Scholberg, J.M.S.; Koopmans, C.J.

2011-01-01

On-farm nitrogen fixation is a driving force in organic agriculture. The efficiency with which this nitrogen is used can be increased by using alfalfa or grass-clover crops directly as fertilizer on other fields: cut-and-carry fertilizers. In two crops in two years, the use of several types of

Atividade de fosfatases em gramíneas forrageiras em resposta à disponibilidade de fósforo no solo e à altura de corte das plantas Phosphatase activity in forage grasses as influenced by soil phosphorus availability and plant cutting height

Directory of Open Access Journals (Sweden)

Flancer Novais Nunes

2008-10-01

intenso, independentemente da dose de P, tanto Brachiaria quanto Panicum apresentaram menor EUP. Isso ocorreu associado à maior atividade das enzimas APase e RNase, indicando que outros mecanismos relacionados com a adaptação das plantas a baixas disponibilidades de P podem estar envolvidos.The nutrient use efficiency, expressed by the ratio between the produced biomass and nutrient content, is an important adaptive characteristic of plants, particularly of those cultivated in low-fertility soils. A high P-use efficiency (PUE is conferred by high P remobilization rates, i.e., P transport to regions of greater metabolic demand in the plant. High P remobilization rates have been associated with high acid phosphatase (APase and ribonuclease (RNase enzyme activities. In our study, we evaluated the activity of these enzymes in Brachiaria decumbens, with a low, and Panicum maximum cv Tanzânia, with a high P demand, cultivated in soil treated with different P rates and cut at different heights. The experiment was carried out in a greenhouse, using B-horizon samples of a clayey Yellow-Red Latosol. The treatments consisted of a factorial combination of two grasses, three P rates (100, 200 and 500 mg dm-3 and three cutting heights: no cutting, 15 and 30 cm above the soil surface for Brachiaria, and no cutting, 20 and 40 cm for Panicum. The experimental units consisted of pots with 10 dm³ soil, with 10 plants each. Results indicated that there was no significant difference between biomass production of the two grasses, but the P application resulted in a higher biomass yield and P shoot concentration. The biomass production of plants cut at a lower height was smaller and P concentrations in shoots were higher. A significant effect of P rates on the APase and the RNase activities was observed in both forages. In plants grown at the lowest P rate enzyme activities and PUE were the highest. The activity of both phosphatases decreased with plant aging. In the treatment with the

Machining of Some Difficult-to-Cut Materials with Rotary Cutting Tools

OpenAIRE

Stjernstoft, Tero

2004-01-01

Automobile and aero industries have an increasing interestin materials with improved mechanical properties. However, manyof these new materials are classified as difficult-to-cut withconventional tools. It is obvious that tools, cutting processesand cutting models has to be devel-oped parallel to materialsscience. In this thesis rotary cutting tools are tested as analternative toexpensive diamond or cubic bore nitridetools. Metal matrix composites mostly consist of a light metalalloy (such as...

Study on the cutting behavior of plasma sprayed ceramic coatings. Plasma yosha ceramics himaku no sessaku kyodo ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Inui, Y; Kubohori, T; Ikuta, T [Kinki Univ., Higashi-Osaka, Osaka (Japan). Faculty of Science and Technology

1992-09-30

Fracture behavior of Al2O3-TiO2 sprayed ceramic coating was investigated at low cutting speeds when using two dimensional cutting. Scanning electron microscope was used to observe the generation, development and propagation of cracks during cutting. Small cracks and fracture have been developed in the cutting groove along the cutting direction, and there has been many fractures in spray particles unit. In the initial stage of cutting, radiant cracks have developed on the sprayed coating, however, linear big cracks starting from the cutting edge towards the cutting direction, have developed. The cracks have developed along the grain boundary of coating component, and cracks progressed along the portion with weak bonding force. When the depth of the cut was under 5[mu]m, the cutting face has formed many microfractures, and the cutting has been very stable. It has been necessary to select the cutting conditions that do not cause big fracture, microcutting and so on, in order to achieve favorable surface condition with minor fractures. 8 refs., 13 figs., 2 tabs.

Minimal cut-set methodology for artificial intelligence applications

International Nuclear Information System (INIS)

Weisbin, C.R.; de Saussure, G.; Barhen, J.; Oblow, E.M.; White, J.C.

1984-01-01

This paper reviews minimal cut-set theory and illustrates its application with an example. The minimal cut-set approach uses disjunctive normal form in Boolean algebra and various Boolean operators to simplify very complicated tree structures composed of AND/OR gates. The simplification process is automated and performed off-line using existing computer codes to implement the Boolean reduction on the finite, but large tree structure. With this approach, on-line expert diagnostic systems whose response time is critical, could determine directly whether a goal is achievable by comparing the actual system state to a concisely stored set of preprocessed critical state elements

Minimizing waste (off-cuts using cutting stock model: The case of one dimensional cutting stock problem in wood working industry

Directory of Open Access Journals (Sweden)

Gbemileke A. Ogunranti

2016-09-01

Full Text Available Purpose: The main objective of this study is to develop a model for solving the one dimensional cutting stock problem in the wood working industry, and develop a program for its implementation. Design/methodology/approach: This study adopts the pattern oriented approach in the formulation of the cutting stock model. A pattern generation algorithm was developed and coded using Visual basic.NET language. The cutting stock model developed is a Linear Programming (LP Model constrained by numerous feasible patterns. A LP solver was integrated with the pattern generation algorithm program to develop a one - dimensional cutting stock model application named GB Cutting Stock Program. Findings and Originality/value: Applying the model to a real life optimization problem significantly reduces material waste (off-cuts and minimizes the total stock used. The result yielded about 30.7% cost savings for company-I when the total stock materials used is compared with the former cutting plan. Also, to evaluate the efficiency of the application, Case I problem was solved using two top commercial 1D-cutting stock software.  The results show that the GB program performs better when related results were compared. Research limitations/implications: This study round up the linear programming solution for the number of pattern to cut. Practical implications: From Managerial perspective, implementing optimized cutting plans increases productivity by eliminating calculating errors and drastically reducing operator mistakes. Also, financial benefits that can annually amount to millions in cost savings can be achieved through significant material waste reduction. Originality/value: This paper developed a linear programming one dimensional cutting stock model based on a pattern generation algorithm to minimize waste in the wood working industry. To implement the model, the algorithm was coded using VisualBasic.net and linear programming solver called lpsolvedll (dynamic

Invasive grasses change landscape structure and fire behavior in Hawaii

Science.gov (United States)

Lisa M. Ellsworth; Creighton M. Litton; Alexander P. Dale; Tomoaki Miura

2014-01-01

How does potential fire behavior differ in grass-invaded non-native forests vs open grasslands? How has land cover changed from 1950–2011 along two grassland/forest ecotones in Hawaii with repeated fires? A study on non-native forest with invasive grass understory and invasive grassland (Megathyrsus maximus) ecosystems on Oahu, Hawaii, USA was...

Cell wall composition throughout development for the model grass Brachypodium distanchyon

Directory of Open Access Journals (Sweden)

David eRancour

2012-12-01

Full Text Available Temperate perennial grasses are important worldwide as a livestock nutritive energy source and a potential feedstock for lignocellulosic biofuel production. The annual temperate grass Brachypodium distanchyon has been championed as a useful model system to facilitate biological research in agriculturally important temperate forage grasses based on phylogenetic relationships. To physically corroborate genetic predictions, we determined the chemical composition profiles of organ-specific cell walls throughout the development of two common diploid accessions of Brachypodium distanchyon, Bd21-3 and Bd21. Chemical analysis was performed on cell walls isolated from distinct organs (i.e. leaves, sheaths, stems and roots at three developmental stages of 1 12-day seedling, 2 vegetative-to-reproductive transition, and 3 mature seed-fill. In addition, we have included cell wall analysis of embryonic callus used for genetic transformations. Composition of cell walls based on components lignin, hydroxycinnamates, uronosyls, neutral sugars, and protein suggests that Brachypodium distanchyon is similar chemically to agriculturally important forage grasses. There were modest compositional differences in hydroxycinnamate profiles between accessions Bd21-3 and Bd21. In addition, when compared to agronomical important C3 grasses, more mature Brachypodium stem cell walls have a relative increase in glucose of 48% and a decrease in lignin of 36%. Though differences exists between Brachypodium and agronomical important C3 grasses, Brachypodium distanchyon should be still a useful model system for genetic manipulation of cell wall composition to determine the impact upon functional characteristics such as rumen digestibility or energy conversion efficiency for bioenergy production.

First evidence of grass carp recruitment in the Great Lakes Basin

Science.gov (United States)

Chapman, Duane C.; Davis, J. Jeremiah; Jenkins, Jill A.; Kocovsky, Patrick M.; Miner, Jeffrey G.; Farver, John; Jackson, P. Ryan

2013-01-01

We use aging techniques, ploidy analysis, and otolith microchemistry to assess whether four grass carp Ctenopharyngodon idella captured from the Sandusky River, Ohio were the result of natural reproduction within the Lake Erie Basin. All four fish were of age 1 +. Multiple lines of evidence indicate that these fish were not aquaculture-reared and that they were most likely the result of successful reproduction in the Sandusky River. First, at least two of the fish were diploid; diploid grass carp cannot legally be released in the Great Lakes Basin. Second, strontium:calcium (Sr:Ca) ratios were elevated in all four grass carp from the Sandusky River, with elevated Sr:Ca ratios throughout the otolith transect, compared to grass carp from Missouri and Arkansas ponds. This reflects the high Sr:Ca ratio of the Sandusky River, and indicates that these fish lived in a high-strontium environment throughout their entire lives. Third, Sandusky River fish were higher in Sr:Ca ratio variability than fish from ponds, reflecting the high but spatially and temporally variable strontium concentrations of southwestern Lake Erie tributaries, and not the stable environment of pond aquaculture. Fourth, Sr:Ca ratios in the grass carp from the Sandusky River were lower in their 2011 growth increment (a high water year) than the 2012 growth increment (a low water year), reflecting the observed inverse relationship between discharge and strontium concentration in these rivers. We conclude that these four grass carp captured from the Sandusky River are most likely the result of natural reproduction within the Lake Erie Basin.

Cell wall composition throughout development for the model grass Brachypodium distachyon

Science.gov (United States)

Rancour, David M.; Marita, Jane M.; Hatfield, Ronald D.

2012-01-01

Temperate perennial grasses are important worldwide as a livestock nutritive energy source and a potential feedstock for lignocellulosic biofuel production. The annual temperate grass Brachypodium distachyon has been championed as a useful model system to facilitate biological research in agriculturally important temperate forage grasses based on phylogenetic relationships. To physically corroborate genetic predictions, we determined the chemical composition profiles of organ-specific cell walls throughout the development of two common diploid accessions of Brachypodium distachyon, Bd21-3 and Bd21. Chemical analysis was performed on cell walls isolated from distinct organs (i.e., leaves, sheaths, stems, and roots) at three developmental stages of (1) 12-day seedling, (2) vegetative-to-reproductive transition, and (3) mature seed fill. In addition, we have included cell wall analysis of embryonic callus used for genetic transformations. Composition of cell walls based on components lignin, hydroxycinnamates, uronosyls, neutral sugars, and protein suggests that Brachypodium distachyon is similar chemically to agriculturally important forage grasses. There were modest compositional differences in hydroxycinnamate profiles between accessions Bd21-3 and Bd21. In addition, when compared to agronomical important C3 grasses, more mature Brachypodium stem cell walls have a relative increase in glucose of 48% and a decrease in lignin of 36%. Though differences exist between Brachypodium and agronomical important C3 grasses, Brachypodium distachyon should be still a useful model system for genetic manipulation of cell wall composition to determine the impact upon functional characteristics such as rumen digestibility or energy conversion efficiency for bioenergy production. PMID:23227028

Hygrothermal Properties and Performance of Sea Grass Insulation

DEFF Research Database (Denmark)

Eriksen, Marlene Stenberg Hagen; Laursen, Theresa Back; Rode, Carsten

2008-01-01

In the attempt to obtain knowledge of the hygrothermal properties of sea grass as thermal insulation, experiments have been carried out in the laboratory to determine the thermal conductivity, sorption properties and the water vapour permeability of the material. In order to investigate the hygro......In the attempt to obtain knowledge of the hygrothermal properties of sea grass as thermal insulation, experiments have been carried out in the laboratory to determine the thermal conductivity, sorption properties and the water vapour permeability of the material. In order to investigate...

Determination of 90Sr in grass and soil

International Nuclear Information System (INIS)

Bajo, S.; Keil, R.

1994-10-01

A radiochemical method for the determination of 90 Sr in non-contaminated grass and soil is presented. The method is based on the leaching of 90 Sr from the mineralized samples followed by liquid-liquid extraction of 90 Y, its short lived daughter, by tributylphosphate and precipitation of Y-oxalate, which is counted in a low-level proportional counter. Based on dried samples of 30 g of soil and 100 g of grass the limit of detection is about 0.1 Bq/kg for both materials. (author) figs., tabs., 43 refs

Current Models for Transcriptional Regulation of Secondary Cell Wall Biosynthesis in Grasses

Directory of Open Access Journals (Sweden)

Xiaolan Rao

2018-04-01

Full Text Available Secondary cell walls mediate many crucial biological processes in plants including mechanical support, water and nutrient transport and stress management. They also provide an abundant resource of renewable feed, fiber, and fuel. The grass family contains the most important food, forage, and biofuel crops. Understanding the regulatory mechanism of secondary wall formation in grasses is necessary for exploiting these plants for agriculture and industry. Previous research has established a detailed model of the secondary wall regulatory network in the dicot model species Arabidopsis thaliana. Grasses, branching off from the dicot ancestor 140–150 million years ago, display distinct cell wall morphology and composition, suggesting potential for a different secondary wall regulation program from that established for dicots. Recently, combined application of molecular, genetic and bioinformatics approaches have revealed more transcription factors involved in secondary cell wall biosynthesis in grasses. Compared with the dicots, grasses exhibit a relatively conserved but nevertheless divergent transcriptional regulatory program to activate their secondary cell wall development and to coordinate secondary wall biosynthesis with other physiological processes.

Aggressiveness of loose kernel smut isolate from Johnson grass on sorghum line BTx643

Science.gov (United States)

An isolate of loose kernel smut obtained from Johnson grass was inoculated unto six BTx643 sorghum plants in the greenhouse to determine its aggressiveness. All the BTx643 sorghum plants inoculated with the Johnson grass isolate were infected. Mean size of the teliospores from the Johnson grass, i...

Ultra-short-course booster is effective in recurrent grass pollen-induced allergic rhinoconjunctivitis.

Science.gov (United States)

Pfaar, O; Lang, S; Pieper-Fürst, U; Astvatsatourov, A; Gerich, F; Klimek, L; Kramer, M F; Reydelet, Y; Shah-Hosseini, K; Mösges, R

2018-01-01

A relevant proportion of allergic rhinoconjunctivitis (ARC) patients experience recurrent symptoms after successfully completing allergen immunotherapy (AIT). This prospective, controlled, noninterventional study used internationally standardized instruments to determine the clinical effects of a preseasonal, ultra-short-course booster AIT on clinical outcome parameters. This two-arm study included patients aged ≥12 years with recurrent grass pollen-induced seasonal AR who had completed a successful course of any grass pollen AIT at least 5 years before enrolment. Overall, 56 patients received one preseasonal short-course booster AIT using tyrosine-absorbed grass pollen allergoids containing the adjuvant monophosphoryl lipid A (MPL ® ); 51 control patients received symptomatic medication. The combined symptom and medication score (CSMS) was recorded in the (peak) grass pollen season. Furthermore, concomitant (antiallergic) medication use, the patients' state of health, Mini Rhinoconjunctivitis Quality of Life Questionnaire (MiniRQLQ) results and safety/tolerability of the treatment were assessed. The CSMS in the peak grass pollen season was significantly lower in the booster AIT group (Δ=38.4%, Pallergoids containing the adjuvant MPL ® effectively prevents re-occurrence of symptoms in patients with grass pollen-induced ARC. © 2017 The Authors. Allergy Published by John Wiley & Sons Ltd.

Performance Evaluation of Cutting Fluids Developed from Fixed Oils

Directory of Open Access Journals (Sweden)

Emmanuel Ogo ONCHE

2007-01-01

Full Text Available In this work, different cutting fluid emulsions of about 10% concentration were developed from fixed oils and the performance of each of the developed cutting fluid was evaluated by a direct comparison with as purchased conventional cutting fluid (control sample, using the ability of each sample to effectively perform as coolant and lubricant during machining operation as determinant. In the evaluation process, straight turning operation on lathe machine at various speeds, but equal time intervals of 10 minutes was used with a 2 mm/min feed rate. It was found that cutting fluid developed from groundnut oil (Sample B performed best as coolant at all experimented speeds, with maximum temperature of 60.5° C at the working zone as against 71.39° C observed for the Control (Sample A. The viscosity 10.76 cSt of Sample B was however, higher than those of Samples A (4.79 cSt and C (6.20 cSt. It was recommended that further work be done to synergize Samples B and C and the cooling effectiveness of the hybridized cutting fluid on the tool-chip interphase, as well as its lubricity be evaluated.

VEGETAL COVERING IN CUT SLOPES BY MEANS OF GEOCELLS OF RUBBERIZED SISAL BIOBLANKETS IN BRASILIA/DF, BRAZIL

Directory of Open Access Journals (Sweden)

Maurizio Sponga

2005-05-01

Full Text Available The strongly wavy relief transposition for implantation of highways has became intensely used in the last decades by means of tunnels, cuts and fillings, causing impacts to the landscape in result of some factors, as decapitation of surfaces, abrupt transformation of land morphology, disequilibrium of superficial and sub superficial water circulation, waste handling sistems, enchainment of erosive processes etc. As an alleviating measure of part of the impacts generated for the excavations for constructing the roadways, procedures of containment and vegetal resetting of surfaces for reduction of the erosive processes and stabilization of mass movements are adopted. The found terrain are very diversified and several occasions the vegetal covering becomes difficult in reason of the physical-chemical characteristics for germination to be inadequate. In areas of high risk to the occupation with stability problems, commonly they use covering with projected concrete for containment of hillsides, that parallelly causes strong environmental and visual impact in the intervention area, and furthermore, possibly, not consisting insolutions duly adequate or definitive for these situations.The search for alternatives is frequent in academic medium as much as in the private initiative for techniques for containment of hillsides and more economic erosion control, looking for lesser ambient impacts and better results. The search of these alternatives gradually becomes technically systemizing itself, aiming at the recovery of the conditions of dynamic balance of the impacted landscapes due to the explosive increase of social and environmental problems intrinsically related.In this direction, it will be presented the description of a work of vegetal covering by grass in plates, antierosive bioblanket and geocells in fibers of rubberized sisal for the confinement of soil in cut slopes of a highway in Brasilia/DF, in Brazil. This technique presented excellent

Group 5 allergens of timothy grass (Phl p 5) bear cross-reacting T cell epitopes with group 1 allergens of rye grass (Lol p 1).

Science.gov (United States)

Müller, W D; Karamfilov, T; Bufe, A; Fahlbush, B; Wolf, I; Jäger, L

1996-04-01

Selected human T cell clones reactive with group 5 allergens of timothy grass (Phl p 5) were cross-stimulated in specific proliferation assays with group 1 allergens of rye grass (Lol p 1). Such interspecies cross-reactivities result obviously from structural motifs presented on defined Phl p 5 fragments as shown with recombinant Phl p 5 products.

Phenology largely explains taller grass at successful nests in greater sage-grouse.

Science.gov (United States)

Smith, Joseph T; Tack, Jason D; Doherty, Kevin E; Allred, Brady W; Maestas, Jeremy D; Berkeley, Lorelle I; Dettenmaier, Seth J; Messmer, Terry A; Naugle, David E

2018-01-01

Much interest lies in the identification of manageable habitat variables that affect key vital rates for species of concern. For ground-nesting birds, vegetation surrounding the nest may play an important role in mediating nest success by providing concealment from predators. Height of grasses surrounding the nest is thought to be a driver of nest survival in greater sage-grouse ( Centrocercus urophasianus ; sage-grouse), a species that has experienced widespread population declines throughout their range. However, a growing body of the literature has found that widely used field methods can produce misleading inference on the relationship between grass height and nest success. Specifically, it has been demonstrated that measuring concealment following nest fate (failure or hatch) introduces a temporal bias whereby successful nests are measured later in the season, on average, than failed nests. This sampling bias can produce inference suggesting a positive effect of grass height on nest survival, though the relationship arises due to the confounding effect of plant phenology, not an effect on predation risk. To test the generality of this finding for sage-grouse, we reanalyzed existing datasets comprising >800 sage-grouse nests from three independent studies across the range where there was a positive relationship found between grass height and nest survival, including two using methods now known to be biased. Correcting for phenology produced equivocal relationships between grass height and sage-grouse nest survival. Viewed in total, evidence for a ubiquitous biological effect of grass height on sage-grouse nest success across time and space is lacking. In light of these findings, a reevaluation of land management guidelines emphasizing specific grass height targets to promote nest success may be merited.

CO2 laser cutting

CERN Document Server

Powell, John

1998-01-01

The laser has given manufacturing industry a new tool. When the laser beam is focused it can generate one of the world's most intense energy sources, more intense than flames and arcs, though similar to an electron beam. In fact the intensity is such that it can vaporise most known materials. The laser material processing industry has been growing swiftly as the quality, speed and new manufacturing possibilities become better understood. In the fore of these new technologies is the process of laser cutting. Laser cutting leads because it is a direct process substitu­ tion and the laser can usually do the job with greater flexibility, speed and quality than its competitors. However, to achieve these high speeds with high quality con­ siderable know how and experience is required. This information is usually carefully guarded by the businesses concerned and has to be gained by hard experience and technical understanding. Yet in this book John Powell explains in lucid and almost non­ technical language many o...

Structural characterization of alkaline hydrogen peroxide pretreated grasses exhibiting diverse lignin phenotypes

Science.gov (United States)

2012-01-01

Background For cellulosic biofuels processes, suitable characterization of the lignin remaining within the cell wall and correlation of quantified properties of lignin to cell wall polysaccharide enzymatic deconstruction is underrepresented in the literature. This is particularly true for grasses which represent a number of promising bioenergy feedstocks where quantification of grass lignins is particularly problematic due to the high fraction of p-hydroxycinnamates. The main focus of this work is to use grasses with a diverse range of lignin properties, and applying multiple lignin characterization platforms, attempt to correlate the differences in these lignin properties to the susceptibility to alkaline hydrogen peroxide (AHP) pretreatment and subsequent enzymatic deconstruction. Results We were able to determine that the enzymatic hydrolysis of cellulose to to glucose (i.e. digestibility) of four grasses with relatively diverse lignin phenotypes could be correlated to total lignin content and the content of p-hydroxycinnamates, while S/G ratios did not appear to contribute to the enzymatic digestibility or delignification. The lignins of the brown midrib corn stovers tested were significantly more condensed than a typical commercial corn stover and a significant finding was that pretreatment with alkaline hydrogen peroxide increases the fraction of lignins involved in condensed linkages from 88–95% to ~99% for all the corn stovers tested, which is much more than has been reported in the literature for other pretreatments. This indicates significant scission of β-O-4 bonds by pretreatment and/or induction of lignin condensation reactions. The S/G ratios in grasses determined by analytical pyrolysis are significantly lower than values obtained using either thioacidolysis or 2DHSQC NMR due to presumed interference by ferulates. Conclusions It was found that grass cell wall polysaccharide hydrolysis by cellulolytic enzymes for grasses exhibiting a diversity of

Structural characterization of alkaline hydrogen peroxide pretreated grasses exhibiting diverse lignin phenotypes

Directory of Open Access Journals (Sweden)

Li Muyang

2012-06-01

Full Text Available Abstract Background For cellulosic biofuels processes, suitable characterization of the lignin remaining within the cell wall and correlation of quantified properties of lignin to cell wall polysaccharide enzymatic deconstruction is underrepresented in the literature. This is particularly true for grasses which represent a number of promising bioenergy feedstocks where quantification of grass lignins is particularly problematic due to the high fraction of p-hydroxycinnamates. The main focus of this work is to use grasses with a diverse range of lignin properties, and applying multiple lignin characterization platforms, attempt to correlate the differences in these lignin properties to the susceptibility to alkaline hydrogen peroxide (AHP pretreatment and subsequent enzymatic deconstruction. Results We were able to determine that the enzymatic hydrolysis of cellulose to to glucose (i.e. digestibility of four grasses with relatively diverse lignin phenotypes could be correlated to total lignin content and the content of p-hydroxycinnamates, while S/G ratios did not appear to contribute to the enzymatic digestibility or delignification. The lignins of the brown midrib corn stovers tested were significantly more condensed than a typical commercial corn stover and a significant finding was that pretreatment with alkaline hydrogen peroxide increases the fraction of lignins involved in condensed linkages from 88–95% to ~99% for all the corn stovers tested, which is much more than has been reported in the literature for other pretreatments. This indicates significant scission of β-O-4 bonds by pretreatment and/or induction of lignin condensation reactions. The S/G ratios in grasses determined by analytical pyrolysis are significantly lower than values obtained using either thioacidolysis or 2DHSQC NMR due to presumed interference by ferulates. Conclusions It was found that grass cell wall polysaccharide hydrolysis by cellulolytic enzymes for grasses

Automatic section cutting and forming control of longitudinal-axial-roadheaders

Energy Technology Data Exchange (ETDEWEB)

Jie Tian; Yang Yang; Guo-Qiang Chen; Hong-Yao Wang; Jian-Gong Liu; Miao Wu [China University of Mining and Technology (Beijing), Beijing (China). School of Mechanical, Electronic and Information Engineering

2009-01-15

To reduce the useless driving workload and volume of filling and improve excavating efficiency, a method of laneway section automatic forming control of longitudinal-axial-roadheaders was presented. Firstly, a mine laneway section automatic cutting process was developed according to actual conditions of a coal mine. Then, a kinematic analysis was carried out of the automatic section forming control, including analysis of the swing mechanism, the spatial position of the cutting head and a geometric analysis of its mechanical structure. The geometrical relationship formulas were worked out between the cutter head spatial position coordinate, expansion increment of the hydraulic cylinders and swinging angles of the cantilever. The results show that the control mode of directly measuring swing angles of the cutting head is more simple and effective. The method proposed was put in practice in EBZ160 and EBZ200 boom-type roadheaders and the effect of experiment is very good, laying a foundation for further study on position detection and direction correction of roadheader. 11 refs., 5 figs., 1 tab.

Pola produksi dan nutrisi rumput Kume (Shorgum plumosum var. Timorense pada lingkungan alamiahnya

Directory of Open Access Journals (Sweden)

Yohana Kamlasi

2014-08-01

Full Text Available The purpose of the study was to know the production system and nutrition content of Kume grass (Shorgum plumosum var. Timorense. The study used experimental method. The data were analyzed descriptively to know the production system and nutrition content of Kume grass. Two variables namely independent variables (cutting age and dependent variables (nutritive values, plant height, dry matter production, organic matter and crude protein were analysed statistically using correlation. The growth pattern of Kume grass from 14 to 112 days was polinomial. The increase of cutting age was followed by the increase of dry matter, organic matter, crude fiber and the decrease of crude protein. The crude fiber also increased together with the cutting age. Keywords:growth, production, nutrition, Kume grass

Explaining grass-nutrient patterns in a savanna rangeland of southern Africa

NARCIS (Netherlands)

Mutanga, O.; Prins, H.H.T.; Skidmore, A.K.; Wieren, van S.E.; Huizing, H.; Grant, R.; Peel, M.J.S.; Biggs, H.

2004-01-01

Aim The search for possible factors influencing the spatial variation of grass quality is an important step towards understanding the distribution of herbivores, as well as a step towards identifying crucial areas for conservation and restoration. A number of studies have shown that grass quality at

Underwater cutting techniques developments

International Nuclear Information System (INIS)

Bach, F.-W.

1990-01-01

The primary circuit structures of different nuclear powerplants are constructed out of stainless steels, ferritic steels, plated ferritic steels and alloys of aluminium. According to the level of the specific radiation of these structures, it is necessary for dismantling to work with remote controlled cutting techniques. The most successful way to protect the working crew against exposure of radiation is to operate underwater in different depths. The following thermal cutting processes are more or less developed to work under water: For ferritic steels only - flame cutting; For ferritic steels, stainless steels, cladded steels and aluminium alloys - oxy-arc-cutting, arc-waterjet-cutting with a consumable electrode, arc-saw-cutting, plasma-arc-cutting and plasma-arc-saw. The flame cutting is a burning process, all the other processes are melt-cutting processes. This paper explains the different techniques, giving a short introduction of the theory, a discussion of the possibilities with the advantages and disadvantages of these processes giving a view into the further research work in this interesting field. (author)

Acute toxic effects of endosulfan sulfate on three life stages of grass shrimp, Palaemonetes pugio.

Science.gov (United States)

Key, Peter B; Chung, Katy W; Venturella, John J; Shaddrick, Brian; Fulton, Michael H

2010-01-01

In this study, the toxicity of endosulfan sulfate, the primary degradation product of the insecticide endosulfan, was determined in three life stages of the grass shrimp (Palaemonetes pugio). After 96 h exposure to endosulfan sulfate, the grass shrimp adult LC50 was 0.86 microg/L (95% CI 0.56-1.31), the grass shrimp larvae LC50 was 1.64 microg/L (95% CI 1.09-2.47) and the grass shrimp embryo LC50 was 45.85 microg/L (95% CI 23.72-88.61 microg/L). This was compared to the previously published grass shrimp 96-h LC50s for endosulfan. The toxicity of the two compounds was similar for the grass shrimp life stages with adults more sensitive than larvae and embryos. The presence of sediment in 24h endosulfan sulfate-exposures raised LC50s for both adult and larval grass shrimp but not significantly. The USEPA expected environmental concentrations (EEC) for total endosulfan and endosulfan sulfate and the calculations of risk quotients (RQ) based on the more sensitive adult grass shrimp 96-h LC50 clearly show that environmental concentrations equal to acute EECs would prove detrimental to grass shrimp or other similarly sensitive aquatic organisms. These results indicate that given the persistence and toxicity of endosulfan sulfate, future risk assessments should consider the toxicity potential of the parent compound as well as this degradation product.

Identification of brome grass infestations in southwest Oklahoma using multi-temporal Landsat imagery

Science.gov (United States)

Yan, D.; de Beurs, K.

2013-12-01

The extensive infestation of brome grasses (Cheatgrass, Rye brome and Japanese brome) in southwest Oklahoma imposes negative impacts on local economy and ecosystem in terms of decreasing crop and forage production and increasing fire risk. Previously proposed methodologies on brome grass detection are found ill-suitable for southwest Oklahoma as a result of similar responses of background vegetation to inter-annual variability of rainfall. In this study, we aim to identify brome grass infestations by detecting senescent brome grasses using the 2011 Cultivated Land Cover Data Sets and the difference Normalized Difference Infrared Index (NDII) derived from multi-temporal Landsat imagery. Landsat imageries acquired on May 18th and June 10th 2013 by Operational Land Imager and Enhanced Thematic Mapper plus were used. The imagery acquisition dates correspond to the peak growth and senescent time of brome grasses, respectively. The difference NDII was calculated by subtracting the NDII image acquired in May from the June NDII image. Our hypotheses is that senescent brome grasses and crop/pasture fields harvested between the two image acquisition dates can be distinguished from background land cover classes because of their increases in NDII due to decreased water absorption by senescent vegetation in the shortwave infrared region. The Cultivated Land Cover Data Sets were used to further separate senescent brome grass patches from newly harvested crop/pasture fields. Ground truth data collected during field trips in June, July and August of 2013 were used to validate the detection results.

No positive feedback between fire and a nonnative perennial grass

Science.gov (United States)

Erika L. Geiger; Guy R. McPherson

2005-01-01

Semi-desert grasslands flank the “Sky Island” mountains in southern Arizona and Northern Mexico. Many of these grasslands are dominated by nonnative grasses, which potentially alter native biotic communities. One specific concern is the potential for a predicted feedback between nonnative grasses and fire. In a large-scale experiment in southern Arizona we investigated...

An approach to evaluate the cutting time for the nuclear dismantling simulation

Energy Technology Data Exchange (ETDEWEB)

Lee, Jonghwan; Hyun, Dongjun; Kang, Sinyoung; Kim, Ikjune; Jeong, Kwan-Seong; Choi, Byung-Seon; Moon, Jeikwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

Nuclear power plant (NPP) decommissioning involves various processes and technologies. Decommissioning should be performed after a comprehensive review of the information related to these processes and technologies. There are various means of prior examination and evaluation to ensure the feasibility and safety of the decommissioning process plan. Our dismantling simulation system aims to simulate and evaluate whole processes related to the dismantlement of core equipment of NPP such as the device preparation, cutting operation, waste transfer, and so on. This paper introduces the estimation methodology of the time required for the cutting processes based on real cutting conditions in order to provide effective economic evaluation functionalities used for the system. The methodology to estimate the time required for the remote cutting process in the nuclear dismantling simulation system was proposed. Among the factors which mainly determine the time, the cutting trace was directly calculated from the simulation system and the continuous cutting speed was obtained by proper order of the spline fitting with constraint conditions.

Características do óleo essencial de capim-citronela em função de espaçamento, altura e época de corte Essential oil characteristics from citronella grass depending on planting space, cutting height and harvesting time

Directory of Open Access Journals (Sweden)

Cláudia A Marco

2007-09-01

Full Text Available A importância do capim-citronela (Cymbopogon winterianum Jowitt. tem crescido nos últimos anos no mercado de produtos naturais, devido à grande procura pelo seu óleo essencial. Neste trabalho, objetivou-se avaliar a influência do espaçamento (50 x 50; 50 x 80 e 80 x 80 cm, altura (15 e 30 cm do solo e época de corte (quatro, seis e oito meses após o plantio na produção e qualidade do óleo essencial de capim-citronela. Desenvolveu-se um ensaio na Fazenda Experimental Vale do Curu (FEVC, pertencente ao Centro de Ciências Agrárias, da Universidade Federal do Ceará, em Pentecoste - CE, no período de setembro de 2002 a setembro de 2003. Os tratamentos foram arranjados como fatorial 3 x 3 x 2, dispostos em blocos casualizados, com três repetições. Plantas colhidas quatro meses após o plantio apresentaram significativamente maior produção de óleo essencial se cortadas a 30 cm de altura. Já plantas colhidas seis meses após o plantio apresentaram maior produção de óleo essencial se cortadas a 15 cm de altura. Para plantas colhidas oito meses após o plantio, a altura de corte não interferiu na produção de óleo essencial. Para espaçamentos mais largos (80 x 80 cm, a produção de óleo essencial foi significativamente mais alta para plantas cortadas a 15 cm, acontecendo o inverso no espaçamento menor (50 x 50 cm. Quando foram avaliados os constituintes citronelol + citronelal observou-se que seus teores foram significativamente mais elevados em plantas cultivadas no espaçamento intermediário, colhidas após os seis meses e a 30 cm de altura. Já o teor de geraniol foi superior em plantas colhidas quatro meses após o plantio, porém não houve influência do espaçamento e altura de corte sobre o seu teor.Citronella grass (Cymbopogon winterianum Jowitt. has grown in importance due to an increasing demand of the essential oil. The influence of spacing (50 x 50; 50 x 80 e 80 x 80 cm, cutting height (15 and 30 cm above

Welding and cutting

International Nuclear Information System (INIS)

Drews, P.; Schulze Frielinghaus, W.

1978-01-01

This is a survey, with 198 literature references, of the papers published in the fields of welding and cutting within the last three years. The subjects dealt with are: weldability of the materials - Welding methods - Thermal cutting - Shaping and calculation of welded joints - Environmental protection in welding and cutting. (orig.) [de

Differentiation of plant age in grasses using remote sensing

Science.gov (United States)

Knox, Nichola M.; Skidmore, Andrew K.; van der Werff, Harald M. A.; Groen, Thomas A.; de Boer, Willem F.; Prins, Herbert H. T.; Kohi, Edward; Peel, Mike

2013-10-01

Phenological or plant age classification across a landscape allows for examination of micro-topographical effects on plant growth, improvement in the accuracy of species discrimination, and will improve our understanding of the spatial variation in plant growth. In this paper six vegetation indices used in phenological studies (including the newly proposed PhIX index) were analysed for their ability to statistically differentiate grasses of different ages in the sequence of their development. Spectra of grasses of different ages were collected from a greenhouse study. These were used to determine if NDVI, NDWI, CAI, EVI, EVI2 and the newly proposed PhIX index could sequentially discriminate grasses of different ages, and subsequently classify grasses into their respective age category. The PhIX index was defined as: (AVNIRn+log(ASWIR2n))/(AVNIRn-log(ASWIR2n)), where AVNIRn and ASWIR2n are the respective normalised areas under the continuum removed reflectance curve within the VNIR (500-800 nm) and SWIR2 (2000-2210 nm) regions. The PhIX index was found to produce the highest phenological classification accuracy (Overall Accuracy: 79%, and Kappa Accuracy: 75%) and similar to the NDVI, EVI and EVI2 indices it statistically sequentially separates out the developmental age classes. Discrimination between seedling and dormant age classes and the adult and flowering classes was problematic for most of the tested indices. Combining information from the visible near infrared (VNIR) and shortwave infrared region (SWIR) region into a single phenological index captures the phenological changes associated with plant pigments and the ligno-cellulose absorption feature, providing a robust method to discriminate the age classes of grasses. This work provides a valuable contribution into mapping spatial variation and monitoring plant growth across savanna and grassland ecosystems.

Anisotropy in Alpedrete granite cutting (Rift, Grain and Hardway directions) and effect on bush hammered heritage ashlars

Science.gov (United States)

Freire-Lista, David Martin; Fort, Rafael

2015-04-01

Many monuments and cities that are part of humanity's heritage have been built with carved granite ashlars. This dimension stone is one of the most used due to its abundance and durability. Traditional quarrymen have used anisotropic planes to cut granite blocks in the quarry for improved cutting performance. These planes are called Rift, Grain and Hardway (R, G, H) according to the ease of cutting. The aim of this study is to determine the response of each of the three orthogonal cutting planes R, G and H to the craft styling with bush hammer, based on their decay. Alpedrete granite was selected for this research, it is a monzogranite quarried in the Sierra de Guadarrana (Spanish Central System) foothills, in the province of Madrid, Spain. It is one of the most representative of Madrid's heritage granites. Alpedrete granite is also used as building stone in other European cities. From an Alpedrete granite bush hammered ashlar, three thin sections were cut parallel to the H plane; these thin sections cut R and G bush hammered planes. Also three thin sections have been cut parallel to the R plane at a distance of 2 mm, 10 mm and 30 mm from the bush hammered surface. All thin sections have been treated with fluorescein. In each of the thin sections a micrograph mosaic was performed covering the entire area (about 10 cm2, 300 photomicrographs) and printed with 120 increases. The length and spacing of inter-, intra- and trans-crystalline microcracks were quantified and measured. Microcracks were subdivided based on affected minerals in each R, G and H planes. Through these observations it was found that Alpedrete Granite R plane (easier to cut) is determined by exfoliation microcracks orientation. That is, R plane is parallel to the exfoliations microcracks, which are intra-crystalline and straight. The cutting of stones in the R plane is due to the coalescence of straight microcracks in the plane. This plane minimizes the effort and cost of subsequent carving so it

Diet Switching by Mammalian Herbivores in Response to Exotic Grass Invasion.

Directory of Open Access Journals (Sweden)

Carolina Bremm

Full Text Available Invasion by exotic grasses is a severe threat to the integrity of grassland ecosystems all over the world. Because grasslands are typically grazed by livestock and wildlife, the invasion is a community process modulated by herbivory. We hypothesized that the invasion of native South American grasslands by Eragrostis plana Nees, an exotic tussock-forming grass from Africa, could be deterred by grazing if grazers switched dietary preferences and included the invasive grass as a large proportion of their diets. Bos taurus (heifers and Ovis aries (ewes grazed plots with varying degrees of invasion by E. plana in a replicated manipulative experiment. Animal positions and species grazed were observed every minute in 45-min grazing session. Proportion of bites and steps in and out of E. plana tussocks were measured and used to calculate several indices of selectivity. Both heifers and ewes exhibited increasing probability of grazing E. plana as the proportion of area covered by tussocks increased, but they behaved differently. In agreement with expectations based on the allometry of dietary preferences and morphology, ewes consumed a low proportion of E. plana, except in areas that had more than 90% E. plana cover. Heifers consumed proportionally more E. plana than ewes. Contrary to our hypothesis, herbivores did not exhibit dietary switching towards the invasive grass. Moreover, they exhibited avoidance of the invasive grass and preference for short-statured native species, both of which should tend to enhance invasion. Unless invasive plants are highly palatable to livestock, the effect of grazing to deter the invasion is limited, due to the inherent avoidance of the invasive grass by the main grazers in the ecosystem, particularly sheep.

Restraining and neck cutting or stunning and neck cutting of veal calves.

Science.gov (United States)

Lambooij, E; van der Werf, J T N; Reimert, H G M; Hindle, V A

2012-05-01

Brain and heart activities were measured in 31 veal calves during restraining and rotating followed by neck cutting with or without stunning to evaluate welfare. After neck cutting correlation dimension analyses and %power of EEG beta wave fraction decreased gradually to lower values resulting in an induction of unconsciousness lasting on average 80s. Corneal reflex response ceased 135±57s after neck cutting. The CD scores and the %power of beta waves fell immediately after post-cut captive bolt and pre-cut electrical stunning to levels indicating unconsciousness. Heart rate in lairage increased upon entrance to the restrainer and again after rotation, heart rate variability decreased. Rotating the restrainer 90°, 120° or 180° compromised veal calf welfare and should be avoided. It is recommended to use post-cut captive bolt stunning or pre-cut electrical stunning inducing immediate unconsciousness. Copyright © 2011 Elsevier Ltd. All rights reserved.

Development of herbicide resistance in black-grass (Alopecurus myosuroides in Bavaria

Directory of Open Access Journals (Sweden)

Gehring, Klaus

2016-02-01

Full Text Available Black-grass (Alopecurus myosuroides is one of the most important grass weeds in Bavaria. Chemical weed control with high efficacy is very important in crops like winter cereals, oilseed rape and maize. Crop rotations with more winter cereals, reduced soil cultivation and e.g. contract harvesting enhanced distribution of blackgrass in arable farming regions. Effects of herbicide resistance were observed since the last 20 years. The blackgrass herbicide resistance is well observed by the official plant protection service of Bavaria. A wide experience of resistance tests shows the development of resistant black-grass and provides an opportunity for future prospects in resistance dynamics.

Effect of Two Oil Dispersants on Larval Grass Shrimp (Palaemonetes pugio) Development.

Science.gov (United States)

Betancourt, P.; Key, P. B.; Chung, K. W.; DeLorenzo, M. E.

2015-12-01

The study focused on the effects that two oil dispersants, Corexit® EC9500A and Finasol® OSR52, have on the development of larval grass shrimp, (Palaemonetes pugio). The hypothesis was that Finasol would have a greater effect on larval grass shrimp development than Corexit. The experiment was conducted using 300 grass shrimp larvae that were 24 hours old. Each larva was exposed individually. In total, five sub-lethal concentrations were tested for each dispersant (control, 1.25, 2.50, 5.0,10.0 mg/L). The larvae were exposed for five days then transferred to clean seawater until metamorphosis into the juvenile stage. Key data measurements recorded included number of days to become juveniles, number of instars, length, dry weight, and mortality. Data from exposed shrimp was compared to the results of the control for each dispersant concentration. Corexit and Finasol exposure treatments of 5 mg/L and 10 mg/L showed significantly higher values for number of days and number of instars to reach juvenile status than values obtained from unexposed, control shrimp. Overall, mortality was higher in the Finasol treatments but the two dispersants did not respond significantly different from one another. Future studies are needed to determine the long term effects of dispersant exposure on all grass shrimp life stages and how any dispersant exposure impacts grass shrimp populations. Grass shrimp serve as excellent toxicity indicators of estuaries, and further studies will help to develop better oil spill mitigation techniques.

Ensiling and hydrothermal pretreatment of grass: Consequences for enzymatic biomass conversion and total monosaccharide yields

DEFF Research Database (Denmark)

Ambye-Jensen, Morten; Johansen, Katja Salomon; Didion, Thomas

2014-01-01

Ensiling may act as a pretreatment of fresh grass biomass and increase the enzymatic conversion of structural carbohydrates to fermentable sugars. However, ensiling does not provide sufficient severity to be a standalone pretreatment method. Here, ensiling of grass is combined with hydrothermal...... treatment (HTT) with the aim of improving the enzymatic biomass convertibility and decrease the required temperature of the HTT. Results: Grass silage (Festulolium Hykor) was hydrothermally treated at temperatures of 170, 180, and 190°C for 10 minutes. Relative to HTT treated dry grass, ensiling increased...... convertibility). The effect of ensiling of grass prior to HTT improved the enzymatic conversion of cellulose for HTT at 170 and 180°C, but the increased glucose release did not make up for the loss of water soluble carbohydrates (WSC) during ensiling. Overall, sugar yields (C6 + C5) were similar for HTT of grass...

Taxonomic studies of grasses and their indigenous uses in the salt ...

African Journals Online (AJOL)

STORAGESEVER

2009-01-19

Jan 19, 2009 ... countries like United States, the principal sources of meat ... Many species of native and introduced grasses are utilized in improved ... turning northwest to cross the river Indus near Kalabagh. (Ahmad and ... Key to the identification of grasses of Salt Range of Pakistan. S. No ...... Under shade of trees.

Productivity and nutritive value of three grass-legume mixtures in the ...

African Journals Online (AJOL)

Productivity and nutritive value of three grass-legume mixtures in the Sudan savannah zone Kano state, Nigeria. ... Results of the study indicated that Sorghum almum-Lablab purpureus mixture recorded numerically higher dry matter yield (7806 kg dm/hectare) compared to other mixtures, similarly leaf area for grass (46.4) ...

Rumen fermentation profile and intestinal digestibility of maize and grass silages

NARCIS (Netherlands)

Ali, M.

2013-01-01

Maize and grass silages are commonly used as major feed materials for dairy cows in Europe and are becoming common parts of dairy cow rations in other parts of the world. Thenutritive value of maize and grass silages varies greatly due to variation in chemical composition. A combination of

The uptake of uranium from soil to vetiver grass (vetiver zizanioides (L.) nash)

International Nuclear Information System (INIS)

Luu Viet Hung; Bui Duy Cam; Dang Duc Nhan

2012-01-01

Uranium uptake of vetiver grass (Vetiveria zizanioides (L.) Nash) from Eutric Fluvisols (AK), Albic Acrisols (LP), Dystric Fluvisols (TT) and Ferralic Acrisols (TC) in northern Vietnam is assessed. The soils were mixed with aqueous solution of uranyl nitrate to make soils be contaminated with uranium at 0, 50, 100, 250 mg per kg before planting the grass. The efficiency of uranium uptake by the grass was assessed based on the soil-to-plant transfer factor (TF U , kg kg -1 ). It was found that the TF U values are dependent upon the soil properties. CEC facilitates the uptake and the increase soil pH could reduce the uptake and translocation of uranium in the plant. Organic matter content as well as ferrous and potassium inhibit the uranium uptake of the grass. It was revealed that the lower fertile soil the higher uranium uptake. The grass could tolerate to the high extent (up to 77%) of uranium in soils and could survive and grow well without fertilization. The translocation of uranium in root for all the soil types studies almost higher than that in its shoot. It seem that vetiver grass potentially be use for the purpose of phytoremediation of soils contaminated with uranium. (author)

Global grass (Poaceae) success underpinned by traits facilitating colonization, persistence and habitat transformation.

Science.gov (United States)

Linder, H P; Lehmann, Caroline E R; Archibald, Sally; Osborne, Colin P; Richardson, David M

2018-05-01

Poaceae (the grasses) is arguably the most successful plant family, in terms of its global occurrence in (almost) all ecosystems with angiosperms, its ecological dominance in many ecosystems, and high species richness. We suggest that the success of grasses is best understood in context of their capacity to colonize, persist, and transform environments (the "Viking syndrome"). This results from combining effective long-distance dispersal, efficacious establishment biology, ecological flexibility, resilience to disturbance and the capacity to modify environments by changing the nature of fire and mammalian herbivory. We identify a diverse set of functional traits linked to dispersal, establishment and competitive abilities. Enhanced long-distance dispersal is determined by anemochory, epizoochory and endozoochory and is facilitated via the spikelet (and especially the awned lemma) which functions as the dispersal unit. Establishment success could be a consequence of the precocious embryo and large starch reserves, which may underpin the extremely short generation times in grasses. Post-establishment genetic bottlenecks may be mitigated by wind pollination and the widespread occurrence of polyploidy, in combination with gametic self-incompatibility. The ecological competitiveness of grasses is corroborated by their dominance across the range of environmental extremes tolerated by angiosperms, facilitated by both C 3 and C 4 photosynthesis, well-developed frost tolerance in several clades, and a sympodial growth form that enabled the evolution of both annual and long-lived life forms. Finally, absence of investment in wood (except in bamboos), and the presence of persistent buds at or below ground level, provides tolerance of repeated defoliation (whether by fire, frost, drought or herbivores). Biotic modification of environments via feedbacks with herbivory or fire reinforce grass dominance leading to open ecosystems. Grasses can be both palatable and productive

Relevance of Allergenic Sensitization to Cynodon dactylon and Phragmites communis: Cross-reactivity With Pooideae Grasses.

Science.gov (United States)

López-Matas, M A; Moya, R; Cardona, V; Valero, A; Gaig, P; Malet, A; Viñas, M; García-Moral, A; Labrador, M; Alcoceba, E; Ibero, M; Carnés, J

The homologous group of sweet grasses belongs to the Pooideae subfamily, but grass pollen species from other subfamilies can also cause allergy, such as Cynodon dactylon (Chloridoideae) and Phragmites communis (Arundinoideae). C dactylon and P communis have not been included in the sweet grasses homologous group because of their low cross-reactivity with other grasses. The aims of this study were to investigate the profile of sensitization to C dactylon and P communis in patients sensitized to grasses and to analyze cross-reactivity between these 2 species and temperate grasses. Patients were skin prick tested with a grass mixture (GM). Specific IgE to GM, C dactylon, P communis, Cyn d 1, and Phl p 1 was measured by ImmunoCAP. A pool of sera was used for the immunoblot assays. Cross-reactivity was studied by ELISA and immunoblot inhibition. Thirty patients had sIgE to GM. Twenty-four (80%) had positive results for C dactylon, 27 (90%) for P communis, 22 (73.3%) for nCyn d 1, and 92.9% for rPhl p 1. Bands were detected in the 3 extracts by immunoblot. Inhibition of GM was not observed with C dactylon or P communis by immunoblot or ELISA inhibition. When C dactylon or P communis were used in the solid phase, GM produced almost complete inhibition. Eighty percent of patients sensitized to grasses were also sensitized to C dactylon and 90% were sensitized to P communis. Sensitization to these species seems to be induced by allergens different to those in sweet grasses.

POTENTIALS OF AGRICULTURAL WASTE AND GRASSES IN ...

African Journals Online (AJOL)

Shima

Potentials of some agricultural waste and grasses were investigated. ... to education, printing, publishing and ... technical form, paper is an aqueous deposit ..... Period of. Soaking. Overnight. Overnight. Overnight. Overnight. Overnight.

Observing Formation of Flux Rope by Tether-cutting Reconnection in the Sun

Energy Technology Data Exchange (ETDEWEB)

Xue, Zhike; Yan, Xiaoli; Yang, Liheng; Wang, Jincheng; Zhao, Li, E-mail: zkxue@ynao.ac.cn [Yunnan Observatories, Chinese Academy of Sciences, Kunming Yunnan 650216 (China)

2017-05-10

Tether-cutting reconnection is considered as one mechanism for the formation of a flux rope. It has been proposed for more than 30 years; however, so far, direct observations of it are very rare. In this Letter, we present observations of the formation of a flux rope via tether-cutting reconnection in NOAA AR 11967 on 2014 February 2 by combining observations with the New Vacuum Solar Telescope and the Solar Dynamic Observatory . The tether-cutting reconnection occurs between two sets of highly sheared magnetic arcades. Comprehensive observational evidence of the reconnection is as follows: changes of the connections between the arcades, brightenings at the reconnection site, hot outflows, formation of a flux rope, slow-rise motion of the flux rope, and flux cancelation. The outflows are along three directions from the reconnection site to the footpoints with the velocities from 24 ± 1 km s{sup −1} to 69 ± 5 km s{sup −1}. Additionally, it is found that the newly formed flux rope connects far footpoints and has a left-handed twisted structure with many fine threads and a concave-up-shape structure in the middle. All the observations are in agreement with the tether-cutting model and provide evidence that tether-cutting reconnection leads to the formation of the flux rope associated with flux shear flow and cancelation.

Cut Based Method for Comparing Complex Networks.

Science.gov (United States)

Liu, Qun; Dong, Zhishan; Wang, En

2018-03-23

Revealing the underlying similarity of various complex networks has become both a popular and interdisciplinary topic, with a plethora of relevant application domains. The essence of the similarity here is that network features of the same network type are highly similar, while the features of different kinds of networks present low similarity. In this paper, we introduce and explore a new method for comparing various complex networks based on the cut distance. We show correspondence between the cut distance and the similarity of two networks. This correspondence allows us to consider a broad range of complex networks and explicitly compare various networks with high accuracy. Various machine learning technologies such as genetic algorithms, nearest neighbor classification, and model selection are employed during the comparison process. Our cut method is shown to be suited for comparisons of undirected networks and directed networks, as well as weighted networks. In the model selection process, the results demonstrate that our approach outperforms other state-of-the-art methods with respect to accuracy.

Determination of trace element contents in grass samples for cattle feeding using NAA techniques

Energy Technology Data Exchange (ETDEWEB)

Yusof, Alias Mohamad; Jagir Singh, Jasbir Kaur

1987-09-01

An investigation on trace elements contents in six types of grass samples used for cattle feeding have been carried out using NAA techniques. The grass samples, Mardi Digit, African Star, Signal, Guinea, Setaria and Setaria Splendida were found to contain at least 19 trace elements in varying concentrations. The results were compared to the figures obtained from available sources to ascertain the status as to whether the grass samples studied would satisfy the minimum requirements of trace elements present in grass for cattle feeding or otherwise. Preference made on the suitability of the grass samples for cattle feeding was based on the availability and abundance of the trace elements, taking into account factors such as the degree of toxicity, inadequate amounts and contamination due to the presence of other trace elements not essential for cattle feeding.

Determination of trace element contents in grass samples for cattle feeding using NAA techniques

International Nuclear Information System (INIS)

Alias Mohamad Yusof; Jasbir Kaur Jagir Singh

1987-01-01

An investigation on trace elements contents in six types of grass samples used for cattle feeding have been carried out using NAA techniques. The grass samples, Mardi Digit, African Star, Signal, Guinea, Setaria and Setaria Splendida were found to contain at least 19 trace elements in varying concentrations. The results were compared to the figures obtained from available sources to ascertain the status as to whether the grass samples studied would satisfy the minimum requirements of trace elements present in grass for cattle feeding or otherwise. Preference made on the suitability of the grass samples for cattle feeding was based on the availability and abundance of the trace elements, taking into account factors such as the degree of toxicity, inadequate amounts and contamination due to the presence of other trace elements not essential for cattle feeding. (author)

NITROGEN CONTENT AND DRY-MATTER DIGESTIBILITY OF GUINEA AND SABI GRASSES AS INFLUENCED BY TREE LEGUME CANOPY

Directory of Open Access Journals (Sweden)

Andi Lagaligo Amar

2012-08-01

Full Text Available A research study was undertaken to study the grass layer across a mini landscape dominated by tree legume Albizia lebbeck to explore the nutritional differences of two introduced grasses, guinea grass (Panicum maximum and sabi grass (Urochloa mosambicensis, paying particular attention to the presence or absence of tree legume canopy of Albizia lebbeck. The two grass species showed a tendency to replace the native spear grass (Heteropogon contortus; their dominance was more or less complete under tree canopies but was increasing in open areas between trees. Nutritional differences were examined by nitrogen concentration and dry matter digestibility. For comparison, Heteropogon contortus, a native species only found in the open, was included in the nutritional determination using the same methods as the guinea and sabi grasses. The quality parameters of the pasture species were statistically compared (LSD, P=0.05. The quality of herbage was different between the species. Urochloa mosambicensis was better than Panicum maximum. In the open, sabi grass has higher N content (0.62% than guinea grass (0.55%, but they were similar when grown under the canopy (0.69% and 0.72%, respectively. Sabi grass has consistently higher dry matter digestibility (41.39% and 36.83%, respectively under the canopy and in the open, than guinea grass (27.78% and 24.77%. These two species are much higher in both N concentration and dry matter digestibility than the native spear grass. The native species has contained 0.28% N, and 17.65% digestible dry matter. The feeding values of herbage were influenced by the canopy factor. Both guinea and sabi grasses have better quality when grown under the tree canopies than in between canopies. Nitrogen concentration and dry matter digestibility of the guinea grass under canopy were, 0.72% and 27.78%, respectively, significantly higher than those from the open area, 0.55% and 24.77%. Similarly, herbage of sabi grass under canopy has 0

Evaluating poverty grass (Danthonia spicata) for golf courses in the Midwest

Science.gov (United States)

Nadia E. Navarrete-Tindall; J.W. Van Sambeek

2010-01-01

Poverty grass (Danthonia spicata (L.) P. beauv. Ex Roem & Schult. ) results presented here are part of ongoing studies to evaluate its adaptation for golf courses as part of low maintenance natural communities at Lincoln University of Missouri. Because its natural adaptation to shade and poor soils, poverty grass could be established in golf...

Paper Cuts.

Science.gov (United States)

Greene, Lisa A.

1990-01-01

Describes how to create paper cuts and suggests the most appropriate materials for young children that give good quality results. Describes the methods the author, a professional artist, uses to assemble her own paper cuts and how these can be adopted by older students. (KM)