Analysis of Shrinkage on Thick Plate Part using Genetic Algorithm

Directory of Open Access Journals (Sweden)

Najihah S.N.

2016-01-01

Full Text Available Injection moulding is the most widely used processes in manufacturing plastic products. Since the quality of injection improves plastic parts are mostly influenced by process conditions, the method to determine the optimum process conditions becomes the key to improving the part quality. This paper presents a systematic methodology to analyse the shrinkage of the thick plate part during the injection moulding process. Genetic Algorithm (GA method was proposed to optimise the process parameters that would result in optimal solutions of optimisation goals. Using the GA, the shrinkage of the thick plate part was improved by 39.1% in parallel direction and 17.21% in the normal direction of melt flow.

Uni-directional waves over slowly varying bottom, part II: Deformation of travelling waves

NARCIS (Netherlands)

Pudjaprasetya, S.R.; Pudjaprasetya, S.R.; van Groesen, Embrecht W.C.

1996-01-01

A new Korteweg-de Vries type of equation for uni-directional waves over slowly varying bottom has been derived in Part I. The equation retains the Hamiltonian structure of the underlying complete set of equations for surface waves. For flat bottom it reduces to the standard Korteweg-de Vries

Considerations and concerting on the european directive transposition to the internal gas market

International Nuclear Information System (INIS)

Bricq, N.

1999-10-01

In the framework of the directive 98/30/CE transposition on the the gas internal market, a report has been asked by the First Ministry to define the new form of the gas utilities. The directive deals with the competition opening. The first part presents the gas market organization in France, today and after the transposition. The second part analyses the big stakes of this transposition. (A.L.B)

Considerations and concerting on the european directive transposition to the internal gas market; Mission de reflexion et de concertation sur la transposition de la directive europeenne sur ''le marche interieur du gaz''

Energy Technology Data Exchange (ETDEWEB)

Bricq, N

1999-10-01

In the framework of the directive 98/30/CE transposition on the the gas internal market, a report has been asked by the First Ministry to define the new form of the gas utilities. The directive deals with the competition opening. The first part presents the gas market organization in France, today and after the transposition. The second part analyses the big stakes of this transposition. (A.L.B)

Elastic-Plastic Fracture Mechanics Analyses for Circumferential Part-Through Surface Cracks at the Interface Between elbows and Pipes

International Nuclear Information System (INIS)

Song, Tae Kwang; Oh, Chang Kyun; Kim, Yun Jae; Kim, Jong Sung; Jin, Tae Eun

2007-01-01

This paper presents plastic limit loads and approximate J-integral estimates for circumferential part-through surface crack at the interface between elbows and pipes. Based on finite element limit analyses using elastic-perfectly plastic materials, plastic limit moments under in-plane bending are obtained and it is found that they are similar those for circumferential part-through surface cracks in the center of elbow. Based on present FE results, closed-form limit load solutions are proposed. Welds are not explicitly considered and all materials are assumed to be homogeneous. And the method to estimate the elastic-plastic J-integral for circumferential part-through surface cracks at the interface between elbows and straight pipes is proposed based on the reference stress approach, which was compared with corresponding solutions for straight pipes

Elastic-Plastic Fracture Mechanics Analyses For circumferential Part-through Surface Cracks At The Interface Between Elbows and Pipes

International Nuclear Information System (INIS)

Song, Tae Kwang; Kim, Yun Jae; Oh, Chang Kyun; Kim, Jong Sung; Jin, Tae Eun

2007-01-01

This paper presents plastic limit loads and approximate J-integral estimates for circumferential part-through surface crack at the interface between elbows and pipes. Based on finite element limit analyses using elastic-perfectly plastic materials, plastic limit moments under in-plane bending are obtained and it is found that they are similar those for circumferential part-through surface cracks in the center of elbow. Based on present FE results, closed-form limit load solutions are proposed. Welds are not explicitly considered and all materials are assumed to be homogeneous. And the method to estimate the elastic-plastic J-integral for circumferential part-through surface cracks at the interface between elbows and straight pipes is proposed based on the reference stress approach, which was compared with corresponding solutions for straight pipes

Scripts for TRUMP data analyses. Part II (HLA-related data): statistical analyses specific for hematopoietic stem cell transplantation.

Science.gov (United States)

Kanda, Junya

2016-01-01

The Transplant Registry Unified Management Program (TRUMP) made it possible for members of the Japan Society for Hematopoietic Cell Transplantation (JSHCT) to analyze large sets of national registry data on autologous and allogeneic hematopoietic stem cell transplantation. However, as the processes used to collect transplantation information are complex and differed over time, the background of these processes should be understood when using TRUMP data. Previously, information on the HLA locus of patients and donors had been collected using a questionnaire-based free-description method, resulting in some input errors. To correct minor but significant errors and provide accurate HLA matching data, the use of a Stata or EZR/R script offered by the JSHCT is strongly recommended when analyzing HLA data in the TRUMP dataset. The HLA mismatch direction, mismatch counting method, and different impacts of HLA mismatches by stem cell source are other important factors in the analysis of HLA data. Additionally, researchers should understand the statistical analyses specific for hematopoietic stem cell transplantation, such as competing risk, landmark analysis, and time-dependent analysis, to correctly analyze transplant data. The data center of the JSHCT can be contacted if statistical assistance is required.

TRAC analyses for CCTF and SCTF tests and UPTF design/operation

International Nuclear Information System (INIS)

Williams, K.A.

1983-01-01

The 2D/3D Program is a multinational (Germany, Japan, and the United States) experimental and analytical nuclear reactor safety research program. The Los Alamos analysis effort is functioning as a vital part of the 2D/3D program. The CCTF and SCTF analyses have demonstrated that TRAC-PF1 can correctly predict multidimensional, nonequilibrium behavior in large-scale facilities prototypical of actual PWR's. Through these and future TRAC analyses the experimental findings can be related from facility to facility, and the results of this research program can be directly related to licensing concerns affecting actual PWR's

Biomass feedstock analyses

Energy Technology Data Exchange (ETDEWEB)

Wilen, C.; Moilanen, A.; Kurkela, E. [VTT Energy, Espoo (Finland). Energy Production Technologies

1996-12-31

The overall objectives of the project `Feasibility of electricity production from biomass by pressurized gasification systems` within the EC Research Programme JOULE II were to evaluate the potential of advanced power production systems based on biomass gasification and to study the technical and economic feasibility of these new processes with different type of biomass feed stocks. This report was prepared as part of this R and D project. The objectives of this task were to perform fuel analyses of potential woody and herbaceous biomasses with specific regard to the gasification properties of the selected feed stocks. The analyses of 15 Scandinavian and European biomass feed stock included density, proximate and ultimate analyses, trace compounds, ash composition and fusion behaviour in oxidizing and reducing atmospheres. The wood-derived fuels, such as whole-tree chips, forest residues, bark and to some extent willow, can be expected to have good gasification properties. Difficulties caused by ash fusion and sintering in straw combustion and gasification are generally known. The ash and alkali metal contents of the European biomasses harvested in Italy resembled those of the Nordic straws, and it is expected that they behave to a great extent as straw in gasification. Any direct relation between the ash fusion behavior (determined according to the standard method) and, for instance, the alkali metal content was not found in the laboratory determinations. A more profound characterisation of the fuels would require gasification experiments in a thermobalance and a PDU (Process development Unit) rig. (orig.) (10 refs.)

Halo-Independent Direct Detection Analyses Without Mass Assumptions

CERN Document Server

Anderson, Adam J.; Kahn, Yonatan; McCullough, Matthew

2015-10-06

Results from direct detection experiments are typically interpreted by employing an assumption about the dark matter velocity distribution, with results presented in the $m_\\chi-\\sigma_n$ plane. Recently methods which are independent of the DM halo velocity distribution have been developed which present results in the $v_{min}-\\tilde{g}$ plane, but these in turn require an assumption on the dark matter mass. Here we present an extension of these halo-independent methods for dark matter direct detection which does not require a fiducial choice of the dark matter mass. With a change of variables from $v_{min}$ to nuclear recoil momentum ($p_R$), the full halo-independent content of an experimental result for any dark matter mass can be condensed into a single plot as a function of a new halo integral variable, which we call $\\tilde{h}(p_R)$. The entire family of conventional halo-independent $\\tilde{g}(v_{min})$ plots for all DM masses are directly found from the single $\\tilde{h}(p_R)$ plot through a simple re...

76 FR 435 - Airworthiness Directives; B/E Aerospace Protective Breathing Equipment (PBE) Part Number 119003...

Science.gov (United States)

2011-01-05

... Airworthiness Directives; B/E Aerospace Protective Breathing Equipment (PBE) Part Number 119003-11 Installed on... February 9, 2011. ADDRESSES: For service information identified in this AD, contact B/E Aerospace, Inc... Jersey Avenue, SE., Washington, DC 20590. FOR FURTHER INFORMATION CONTACT: David Fairback, Aerospace...

Quasi-direct numerical simulation of a pebble bed configuration. Part I: Flow (velocity) field analysis

International Nuclear Information System (INIS)

Shams, A.; Roelofs, F.; Komen, E.M.J.; Baglietto, E.

2013-01-01

Highlights: ► Quasi direct numerical simulations (q-DNS) of a pebble bed configuration has been performed. ► This q-DNS database may serve as a reference for the validation of different turbulence modeling approaches. ► A wide range of qualitative and quantitative data throughout the computational domain has been generated. ► Results for mean, RMS and covariance of velocity field are extensively reported in this paper. -- Abstract: High temperature reactors (HTR) are being considered for deployment around the world because of their excellent safety features. The fuel is embedded in a graphite moderator and can sustain very high temperatures. However, the appearance of hot spots in the pebble bed cores of HTR's may affect the integrity of the pebbles. A good prediction of the flow and heat transport in such a pebble bed core is a challenge for available turbulence models and such models need to be validated. In the present article, quasi direct numerical simulations (q-DNS) of a pebble bed configuration are reported, which may serve as a reference for the validation of different turbulence modeling approaches. Such approaches can be used in order to perform calculations for a randomly arranged pebble bed. Simulations are performed at a Reynolds number of 3088, based on pebble diameter, with a porosity level of 0.42. Detailed flow analyses have shown complex physics flow behavior and make this case challenging for turbulence model validation. Hence, a wide range of qualitative and quantitative data for velocity and temperature field have been extracted for this benchmark. In the present article (part I), results related to the flow field (mean, RMS and covariance of velocity) are documented and discussed in detail. Moreover, the discussion regarding the temperature field will be published in a separate article

Biomechanical Comparison of 3 Inferiorly Directed Versus 3 Superiorly Directed Locking Screws on Stability in a 3-Part Proximal Humerus Fracture Model.

Science.gov (United States)

Donohue, David M; Santoni, Brandon G; Stoops, T Kyle; Tanner, Gregory; Diaz, Miguel A; Mighell, Mark

2018-06-01

To quantify the stability of 3 points of inferiorly directed versus 3 points of superiorly directed locking screw fixation compared with the full contingent of 6 points of locked screw fixation in the treatment of a 3-part proximal humerus fracture. A standardized 3-part fracture was created in 10 matched pairs (experimental groups) and 10 nonmatched humeri (control group). Osteosynthesis was performed using 3 locking screws in the superior hemisphere of the humeral head (suspension), 3 locking screws in the inferior hemisphere (buttress), or the full complement of 6 locking screws (control). Specimens were tested in varus cantilever bending (7.5 Nm) to 10,000 cycles or failure. Construct survival (%) and the cycles to failure were compared. Seven of 10 controls survived the 10,000-cycle runout (70%: 8193 average cycles to failure). No experimental constructs survived the 10,000-cycle runout. Suspension and buttress screw groups failed an average of 331 and 516 cycles, respectively (P = 1.00). The average number of cycles to failure and the number of humeri surviving the 10,000-cycle runout were greater in the control group than in the experimental groups (P ≤ 0.006). Data support the use of a full contingent of 6 points of locking screw fixation over 3 superior or 3 inferior points of fixation in the treatment of a 3-part proximal humerus fracture with a locking construct. No biomechanical advantage to the 3 buttress or 3 suspension screws used in isolation was observed.

Thermodynamic analyses of hydrogen production from sub-quality natural gas. Part I: Pyrolysis and autothermal pyrolysis

Science.gov (United States)

Huang, Cunping; T-Raissi, Ali

Sub-quality natural gas (SQNG) is defined as natural gas whose composition exceeds pipeline specifications of nitrogen, carbon dioxide (CO 2) and/or hydrogen sulfide (H 2S). Approximately one-third of the U.S. natural gas resource is sub-quality gas [1]. Due to the high cost of removing H 2S from hydrocarbons using current processing technologies, SQNG wells are often capped and the gas remains in the ground. We propose and analyze a two-step hydrogen production scheme using SQNG as feedstock. The first step of the process involves hydrocarbon processing (via steam-methane reformation, autothermal steam-methane reformation, pyrolysis and autothermal pyrolysis) in the presence of H 2S. Our analyses reveal that H 2S existing in SQNG is stable and can be considered as an inert gas. No sulfur dioxide (SO 2) and/or sulfur trioxide (SO 3) is formed from the introduction of oxygen to SQNG. In the second step, after the separation of hydrogen from the main stream, un-reacted H 2S is used to reform the remaining methane, generating more hydrogen and carbon disulfide (CS 2). Thermodynamic analyses on SQNG feedstock containing up to 10% (v/v) H 2S have shown that no H 2S separation is required in this process. The Part I of this paper includes only thermodynamic analyses for SQNG pyrolysis and autothermal pyrolysis.

Binary analysis: 1. part: definitions and treatment of binary functions; 2. part: applications and functions of trans-coding; Analyse binaire: 1ere partie: definitions et traitements des fonctions binaires; 2eme partie: applications et fonctions de transcodage

Energy Technology Data Exchange (ETDEWEB)

Vallee, R L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1968-07-01

The study of binary groups under their mathematical aspects constitutes the matter of binary analysis, the purpose of which consists in developing altogether simple, rigorous and practical methods needed by the technicians, the engineers and all those who may be mainly concerned by digital processing. This subject, fast extending if not determining, however tends actually to play a main part in nuclear electronics as well as in several other research areas. (authors) [French] L'analyse binaire a pour objet l'etude mathematique des proprietes d'ensembles binaires algebriques et pour but l'elaboration de methodes simples, rigoureuses et pratiques, destinees aux techniciens, aux ingenieurs et a tous ceux qu'interesse directement le traitement numerique de l'information, discipline en expansion rapide qui, deja, en electronique nucleaire comme dans de nombreux autres domaines de la recherche, tend a jouer un role essentiel sinon determinant. (auteurs)

HIGH THROUGHPUT SCREENING METHOD AND APPARATUS FOR ANALYSING INTERACTIONS BETWEEN SURFACES WITH DIFFERENT TOPOGRAPHY AND THE ENVIRONMENT

NARCIS (Netherlands)

de Boer, Jan; van Blitterswijk, Clemens; Unadkat, H.V.; Stamatialis, Dimitrios; Papenburg, B.J.; Wessling, Matthias

2009-01-01

The invention is directed to a high throughput screening method for analysing and interaction between a surface of a material and an environment. The screening method of the invention comprises: providing a micro-array comprising said material and having a multitude of units at least part of which

Evaluation of polymer micro parts produced by additive manufacturing processes using vat photopolymerization method

DEFF Research Database (Denmark)

Davoudinejad, Ali; Pedersen, David Bue; Tosello, Guido

2017-01-01

Micro manufacturing scale feature production by Additive Manufacturing (AM) processes for the direct production of miniaturized polymer components is analysed in this work. The study characterizes the AM processes for polymer micro parts productions using the vat photopolymerization method...

Halo-independent direct detection analyses without mass assumptions

International Nuclear Information System (INIS)

Anderson, Adam J.; Fox, Patrick J.; Kahn, Yonatan; McCullough, Matthew

2015-01-01

Results from direct detection experiments are typically interpreted by employing an assumption about the dark matter velocity distribution, with results presented in the m χ −σ n plane. Recently methods which are independent of the DM halo velocity distribution have been developed which present results in the v min −g-tilde plane, but these in turn require an assumption on the dark matter mass. Here we present an extension of these halo-independent methods for dark matter direct detection which does not require a fiducial choice of the dark matter mass. With a change of variables from v min to nuclear recoil momentum (p R ), the full halo-independent content of an experimental result for any dark matter mass can be condensed into a single plot as a function of a new halo integral variable, which we call h-til-tilde(p R ). The entire family of conventional halo-independent g-tilde(v min ) plots for all DM masses are directly found from the single h-tilde(p R ) plot through a simple rescaling of axes. By considering results in h-tilde(p R ) space, one can determine if two experiments are inconsistent for all masses and all physically possible halos, or for what range of dark matter masses the results are inconsistent for all halos, without the necessity of multiple g-tilde(v min ) plots for different DM masses. We conduct a sample analysis comparing the CDMS II Si events to the null results from LUX, XENON10, and SuperCDMS using our method and discuss how the results can be strengthened by imposing the physically reasonable requirement of a finite halo escape velocity

Analysis and evaluation of GAVE chains. Part 3 of 3. Appendices; Analyse en evaluatie van GAVE-ketens. Deel 3 van 3. Appendices

Energy Technology Data Exchange (ETDEWEB)

Bosma, W.J.P. [Arthur D. Little International, Rotterdam (Netherlands)

1999-12-01

The final report (part 2) contains the detailed findings of the analysis, evaluation, and integration of Novem GAVE options and aims at the reader who is interested in the detailed findings, as well as an overview of the results. For readers who are mainly interested in the high-level results, and are comfortable with Dutch, there is a short text summary of our results, entitled 'Analyse en evaluatie van GAVE-ketens, management summary' (part 1). These appendices is for readers who are interested in the underlying data and detailed assumptions. 70 refs.

Engineering Analyses of NCSX Modular Coil and Its Supporting Structure for EM Loads

International Nuclear Information System (INIS)

Fan, H.M.; Williamson, D.

2003-01-01

NCSX modular coil is a major parts of the NCSX coil systems that surround the highly shaped plasma and vacuum vessel. The flexible copper cable conductors are used to form modular coil on both sides of the ''tee'' beam, which is cast inside the supporting shell structure. The Engineering analyses comprise sequentially coupled-field analyses that include an electromagnetic analysis to calculate the magnetic fields and EM forces, and a structural analysis to evaluate the structural responses. In the sequential EM-structural analysis, nodal forces obtained from the EM analysis were applied as ''nodal force'' loads in the subsequent stress analysis using the identical nodal points and elements. The shell model was imported directly from Pro/ENGINEER files in order to obtain an accurate structural representation. The Boolean operations provided by the ANSYS preprocessor were then applied to subdivide the solid model for more desirable finite element meshing. Material properties of the modular coil were based on test results. Analyses using the ANSYS program to evaluate structural responses of the complicated modular coil systems provided a clear understanding of the structural behaviors and the directions for improving the structural design

Laboratory Directed Research and Development Program FY98

Energy Technology Data Exchange (ETDEWEB)

Hansen, T. [ed.; Chartock, M.

1999-02-05

The Ernest Orlando Lawrence Berkeley National Laboratory (LBNL or Berkeley Lab) Laboratory Directed Research and Development Program FY 1998 report is compiled from annual reports submitted by principal investigators following the close of the fiscal year. This report describes the supported projects and summarizes their accomplishments. It constitutes a part of the Laboratory Directed Research and Development (LDRD) program planning and documentation process that includes an annual planning cycle, projection selection, implementation, and review. The LBNL LDRD program is a critical tool for directing the Laboratory's forefront scientific research capabilities toward vital, excellent, and emerging scientific challenges. The program provides the resources for LBNL scientists to make rapid and significant contributions to critical national science and technology problems. The LDRD program also advances LBNL's core competencies, foundations, and scientific capability, and permits exploration of exciting new opportunities. All projects are work in forefront areas of science and technology. Areas eligible for support include the following: Advanced study of hypotheses, concepts, or innovative approaches to scientific or technical problems; Experiments and analyses directed toward ''proof of principle'' or early determination of the utility of new scientific ideas, technical concepts, or devices; and Conception and preliminary technical analyses of experimental facilities or devices.

Impact of hepatitis C virus polymorphisms on direct-acting antiviral treatment efficacy: Regulatory analyses and perspectives.

Science.gov (United States)

Harrington, Patrick R; Komatsu, Takashi E; Deming, Damon J; Donaldson, Eric F; O'Rear, Julian J; Naeger, Lisa K

2018-06-01

Several highly effective, interferon-free, direct-acting antiviral (DAA)-based regimens are available for the treatment of chronic hepatitis C virus (HCV) infection. Despite impressive efficacy overall, a small proportion of patients in registrational trials experienced treatment failure, which in some cases was associated with the detection of HCV resistance-associated substitutions (RASs) at baseline. In this article, we describe methods and key findings from independent regulatory analyses investigating the impact of baseline nonstructural (NS) 3 Q80K and NS5A RASs on the efficacy of current United States Food and Drug Administration (FDA)-approved regimens for patients with HCV genotype (GT) 1 or GT3 infection. These analyses focused on clinical trials that included patients who were previously naïve to the DAA class(es) in their investigational regimen and characterized the impact of baseline RASs that were enriched in the viral population as natural or transmitted polymorphisms (i.e., not drug-selected RASs). We used a consistent approach to optimize comparability of results across different DAA regimens and patient populations, including the use of a 15% sensitivity cutoff for next-generation sequencing results and standardized lists of NS5A RASs. These analyses confirmed that detection of NS3 Q80K or NS5A baseline RASs was associated with reduced treatment efficacy for multiple DAA regimens, but their impact was often minimized with the use of an intensified treatment regimen, such as a longer treatment duration and/or addition of ribavirin. We discuss the drug resistance-related considerations that contributed to pretreatment resistance testing and treatment recommendations in drug labeling for FDA-approved DAA regimens. Independent regulatory analyses confirmed that baseline HCV RASs can reduce the efficacy of certain DAA-based regimens in selected patient groups. However, highly effective treatment options are available for patients with or without

Labour Market Flexibility between Risk and Opportunity for Gender Equality Analyses of Self-employment, Part-time Work, and Job Autonomy

OpenAIRE

König, Stefanie

2016-01-01

The dissertation “Labour Market Flexibility between Risk and Opportunity for Gender Equality – Analyses of Self-employment, Part-time Work, and Job Autonomy” addresses the main research question: Is flexibility the key to a less gendered labour market, or does it rather foster more traditional roles and gender inequality? In four empirical studies, different aspects in life were investigated in order to gain a holistic understanding of gender inequalities related to flexibility at work: the d...

Analysis and evaluation of GAVE chains. Part 2 of 3. Final report (sheets presentation); Analyse en evaluatie van GAVE-ketens. Deel 2 van 3. Final report (sheetpresentation)

Energy Technology Data Exchange (ETDEWEB)

Bosma, W.J.P. [Arthur D. Little International, Rotterdam (Netherlands)

1999-12-01

This report contains the detailed findings of the analysis, evaluation, and integration of Novem GAVE options. This main report is meant for the reader who is interested in the detailed findings, as well as an overview of the results. For readers who are mainly interested in the high-level results, and are comfortable with Dutch, there is a short text summary of our results, entitled 'Analyse en evaluatie van GAVE-ketens, management summary' (part 1). Readers who are interested in the underlying data and detailed assumptions are encouraged to consult the appendix to this report, entitled 'Analyse en evaluatie van GAVE-ketens, appendices' (part 3)

Tensile Properties Characterization of AlSi10Mg Parts Produced by Direct Metal Laser Sintering via Nested Effects Modeling.

Science.gov (United States)

Palumbo, Biagio; Del Re, Francesco; Martorelli, Massimo; Lanzotti, Antonio; Corrado, Pasquale

2017-02-08

A statistical approach for the characterization of Additive Manufacturing (AM) processes is presented in this paper. Design of Experiments (DOE) and ANalysis of VAriance (ANOVA), both based on Nested Effects Modeling (NEM) technique, are adopted to assess the effect of different laser exposure strategies on physical and mechanical properties of AlSi10Mg parts produced by Direct Metal Laser Sintering (DMLS). Due to the wide industrial interest in AM technologies in many different fields, it is extremely important to ensure high parts performances and productivity. For this aim, the present paper focuses on the evaluation of tensile properties of specimens built with different laser exposure strategies. Two optimal laser parameters settings, in terms of both process quality (part performances) and productivity (part build rate), are identified.

Total System Performance Assessment Sensitivity Analyses for Final Nuclear Regulatory Commission Regulations

International Nuclear Information System (INIS)

Bechtel SAIC Company

2001-01-01

This Letter Report presents the results of supplemental evaluations and analyses designed to assess long-term performance of the potential repository at Yucca Mountain. The evaluations were developed in the context of the Nuclear Regulatory Commission (NRC) final public regulation, or rule, 10 CFR Part 63 (66 FR 55732 [DIRS 156671]), which was issued on November 2, 2001. This Letter Report addresses the issues identified in the Department of Energy (DOE) technical direction letter dated October 2, 2001 (Adams 2001 [DIRS 156708]). The main objective of this Letter Report is to evaluate performance of the potential Yucca Mountain repository using assumptions consistent with performance-assessment-related provisions of 10 CFR Part 63. The incorporation of the final Environmental Protection Agency (EPA) standard, 40 CFR Part 197 (66 FR 32074 [DIRS 155216]), and the analysis of the effect of the 40 CFR Part 197 EPA final rule on long-term repository performance are presented in the Total System Performance Assessment--Analyses for Disposal of Commercial and DOE Waste Inventories at Yucca Mountain--Input to Final Environmental Impact Statement and Site Suitability Evaluation (BSC 2001 [DIRS 156460]), referred to hereafter as the FEIS/SSE Letter Report. The Total System Performance Assessment (TSPA) analyses conducted and documented prior to promulgation of the NRC final rule 10 CFR Part 63 (66 FR 55732 [DIRS 156671]), were based on the NRC proposed rule (64 FR 8640 [DIRS 101680]). Slight differences exist between the NRC's proposed and final rules which were not within the scope of the FEIS/SSE Letter Report (BSC 2001 [DIRS 156460]), the Preliminary Site Suitability Evaluation (PSSE) (DOE 2001 [DIRS 155743]), and supporting documents for these reports. These differences include (1) the possible treatment of ''unlikely'' features, events and processes (FEPs) in evaluation of both the groundwater protection standard and the human-intrusion scenario of the individual

Forced vibration tests and simulation analyses of a nuclear reactor building. Part 2: simulation analyses

International Nuclear Information System (INIS)

Kuno, M.; Nakagawa, S.; Momma, T.; Naito, Y.; Niwa, M.; Motohashi, S.

1995-01-01

Forced vibration tests of a BWR-type reactor building. Hamaoka Unit 4, were performed. Valuable data on the dynamic characteristics of the soil-structure interaction system were obtained through the tests. Simulation analyses of the fundamental dynamic characteristics of the soil-structure system were conducted, using a basic lumped mass soil-structure model (lattice model), and strong correlation with the measured data was obtained. Furthermore, detailed simulation models were employed to investigate the effects of simultaneously induced vertical response and response of the adjacent turbine building on the lateral response of the reactor building. (author). 4 refs., 11 figs

Part-time work among pediatricians expands.

Science.gov (United States)

Cull, William L; O'Connor, Karen G; Olson, Lynn M

2010-01-01

The objective of this study was to track trends in part-time employment among pediatricians from 2000 to 2006 and to examine differences within subgroups of pediatricians. As part of the Periodic Survey of Fellows, national random samples of American Academy of Pediatrics members were surveyed in 2000, 2003, and 2006. These surveys shared questions concerning working part-time and other practice characteristics. Roughly 1600 pediatricians were included in each random sample. Totals of 812 (51%), 1020 (63%), and 1013 (62%) pediatricians completed the surveys in 2000, 2003, and 2006, respectively. Analyses were limited to nonretired, posttrainee pediatricians. The number of pediatricians who reported that they work part-time increased from 15% in 2000, to 20% in 2003, to 23% in 2006. The pattern of increased part-time work from 2000 to 2006 held for many subgroups, including men, women, pediatricians who were younger than 40 years, pediatricians who were aged >or=50 years, pediatricians who worked in an urban inner city, pediatricians who worked in suburban areas, general pediatricians, and subspecialist pediatricians. Those who were working part-time were more satisfied within their professional and personal activities. Part-time pediatricians worked on average 14.3 fewer hours per week in direct patient care. Increases in part-time work are apparent throughout pediatrics. The possible continued growth of part-time is an important trend within the field of pediatrics that will need to be monitored.

πN → πN and KN → KN low energy data and partial wave analyses recent results and new directions

International Nuclear Information System (INIS)

Kelly, R.L.

1975-07-01

This review deals with πN → πN and KN → KN physics below about 3 GeV/c. An attempt is made to convey the state of the art, and to point out what appear to be promising directions for future research. The situation as of about one year ago is summarized in the 1974 Review of Particle Properties and in London conference talks so more recent developments are considered. A comprehensive survey of πN → πN data between the Δ region and 3 GeV/c is given. Problems associated with spin-rotation experiments are discussed, and the current πN → πN partial wave analyses. I = 1 and I = 0 KN → KN analyses, respectively, are considered

Radiation physics and shielding codes and analyses applied to design-assist and safety analyses of CANDUR and ACRTM reactors

International Nuclear Information System (INIS)

Aydogdu, K.; Boss, C. R.

2006-01-01

This paper discusses the radiation physics and shielding codes and analyses applied in the design of CANDU and ACR reactors. The focus is on the types of analyses undertaken rather than the inputs supplied to the engineering disciplines. Nevertheless, the discussion does show how these analyses contribute to the engineering design. Analyses in radiation physics and shielding can be categorized as either design-assist or safety and licensing (accident) analyses. Many of the analyses undertaken are designated 'design-assist' where the analyses are used to generate recommendations that directly influence plant design. These recommendations are directed at mitigating or reducing the radiation hazard of the nuclear power plant with engineered systems and components. Thus the analyses serve a primary safety function by ensuring the plant can be operated with acceptable radiation hazards to the workers and public. In addition to this role of design assist, radiation physics and shielding codes are also deployed in safety and licensing assessments of the consequences of radioactive releases of gaseous and liquid effluents during normal operation and gaseous effluents following accidents. In the latter category, the final consequences of accident sequences, expressed in terms of radiation dose to members of the public, and inputs to accident analysis, e.g., decay heat in fuel following a loss-of-coolant accident, are also calculated. Another role of the analyses is to demonstrate that the design of the plant satisfies the principle of ALARA (as low as reasonably achievable) radiation doses. This principle is applied throughout the design process to minimize worker and public doses. The principle of ALARA is an inherent part of all design-assist recommendations and safety and licensing assessments. The main focus of an ALARA exercise at the design stage is to minimize the radiation hazards at the source. This exploits material selection and impurity specifications and relies

Tensile Properties Characterization of AlSi10Mg Parts Produced by Direct Metal Laser Sintering via Nested Effects Modeling

Directory of Open Access Journals (Sweden)

Biagio Palumbo

2017-02-01

Full Text Available A statistical approach for the characterization of Additive Manufacturing (AM processes is presented in this paper. Design of Experiments (DOE and ANalysis of VAriance (ANOVA, both based on Nested Effects Modeling (NEM technique, are adopted to assess the effect of different laser exposure strategies on physical and mechanical properties of AlSi10Mg parts produced by Direct Metal Laser Sintering (DMLS. Due to the wide industrial interest in AM technologies in many different fields, it is extremely important to ensure high parts performances and productivity. For this aim, the present paper focuses on the evaluation of tensile properties of specimens built with different laser exposure strategies. Two optimal laser parameters settings, in terms of both process quality (part performances and productivity (part build rate, are identified.

How narrow-band and broad-band uvb irradiation influences the immunohistochemistry analyses of experimental animals’ skin – a comparative study. Part II

Directory of Open Access Journals (Sweden)

Katarzyna Borowska

2017-09-01

Full Text Available This is the second part of the artcle series impact narrow-band UVB radiation (NB-UVB and broad-band UVB radiation (BB-UVB on experimental animals’ skin (white Wistar female rats. The aim of this comparative study was immunohistochemistry analyses containing expression of p53 protein. Expression of p53 protein was performed on two experimental groups. One – exposed to NB-UVB; the other – exposed to BB-UVB radiation. The results indicate that p53 protein takes an active part in the process of apoptosis that is induced by both NB-UVB and BB-UVB. The results showed an increase in p53 expressing cells following BB-UVB than NB-UVB phototherapy.

The shift of energy regulatory powers under the framework of Directive 2009/72/EC

International Nuclear Information System (INIS)

Grimm, N. S.

2011-01-01

The paper examines the powers of Member States' national regulatory authorities under the framework of Directive 2009/72/EC of the European Parliament and of the Council of 13 July 2009 concerning common rules for the internal market in electricity and repealing Directive 2003/54/EC (OJEU L 176/37) and analyses the implications of framework of Directive 2009/72/EC on the national laws of the Member States, in particular on the Austrian and German constitutional, administrative and energy laws. The Introductory Part gives a historical overview of the development of national energy regulators under European energy legislation. This Part shows that the national regulatory authorities attract increased attention and that their regulatory powers are on a constant rise. In order to understand the huge impact of the framework of Directive 2009/72/EC on the regulatory regimes of the Member States, this Part briefly examines the former and current powers of the national energy regulators under Austrian and German law. Part Two analyses whether the powers conferred upon national energy regulators under the framework of Directive 2009/72/EC have been enhanced in comparison to those established under the framework of Directive 2003/54/EC. The main focus lies thereby on the propositions made by the European Commission in its Proposal for a Directive of the European Parliament and of the Council amending Directive 2003/54/EC concerning common rules for the internal market in electricity (COM (2007) 528 final, 2.1) and laid down in Directive 2009/72/EC. Part Two comes to the conclusion that the powers of the national energy regulators under the framework of Directive 2009/72/EC have indeed been enhanced in comparison to former regime of Directive 2003/54/EC. Part Three demonstrates that the enhancement of national energy regulators' powers does not benefit the Member States. On the contrary, they lose considerable powers of control over their own national energy regulators. While

Workload analyse of assembling process

Science.gov (United States)

Ghenghea, L. D.

2015-11-01

The workload is the most important indicator for managers responsible of industrial technological processes no matter if these are automated, mechanized or simply manual in each case, machines or workers will be in the focus of workload measurements. The paper deals with workload analyses made to a most part manual assembling technology for roller bearings assembling process, executed in a big company, with integrated bearings manufacturing processes. In this analyses the delay sample technique have been used to identify and divide all bearing assemblers activities, to get information about time parts from 480 minutes day work time that workers allow to each activity. The developed study shows some ways to increase the process productivity without supplementary investments and also indicated the process automation could be the solution to gain maximum productivity.

Thermal analyses. Information on the expected baking process; Thermische analyses. Informatie over een te verwachten bakgedrag

Energy Technology Data Exchange (ETDEWEB)

Van Wijck, H. [Stichting Technisch Centrum voor de Keramische Industrie TCKI, Velp (Netherlands)

2009-09-01

The design process and the drying process for architectural ceramics and pottery partly determine the characteristics of the final product, but the largest changes occur during the baking process. An overview is provided of the different thermal analyses and how the information from these analyses can predict the process in practice. (mk) [Dutch] Het vormgevingsproces en het droogproces voor bouwkeramische producten en aardewerk bepalen voor een deel de eigenschappen van de eindproducten, maar de grootste veranderingen treden op bij het bakproces. Een overzicht wordt gegeven van de verschillende thermische analyses en hoe de informatie uit deze analyses het in de praktijk te verwachten gedrag kan voorspellen.

Adoption of the EU SEA Directive in Turkey

International Nuclear Information System (INIS)

Unalan, Dilek; Cowell, Richard

2009-01-01

This paper analyses the adoption of the EU Strategic Environmental Assessment Directive (2001/42/EC) in Turkey as part of a programme of environmental policy harmonisation for EU accession, to explore the extent to which this is driving wider shifts in modes of environmental governance. To do this, rather than simply assess compliance with Directive in narrow, formal, statutory terms, we use Jaenicke and Weidner's concept of capacity building, which focuses on the constraints facing societal action to promote sustainable development. Despite the resources invested in pre-accession training and pilot SEA projects, Turkey's adoption of the Directive is still likely to be affected by the centralised nature of the bureaucracy (affecting the scope for sectoral integration), its politicised nature (interrupting the accumulation of policy learning), the limited capacity of civil society and environmental organisations to engage with the process, and the political dominance of economic development objectives.

Hardening parts by chrome plating in manufacture and repair

Science.gov (United States)

Astanin, V. K.; Pukhov, E. V.; Stekolnikov, Y. A.; Emtsev, V. V.; Golikova, O. A.

2018-03-01

In the engineering industry, galvanic coatings are widely used to prolong the service life of the machines, which contribute to the increase in the strength of the parts and their resistance to environmental influences, temperature and pressure drops, wear and fretting corrosion. Galvanic coatings have been widely applied in engineering, including agriculture, aircraft building, mining, construction, and electronics. The article focuses on the manufacturing methods of new agricultural machinery parts and the repair techniques of worn parts by chrome plating. The main attention is paid to the unstable methods of chromium deposition (in pulsed and reversing modes) in low-concentration electrolytes, which makes it possible to increase the reliability and durability of the hardened parts operation by changing the conditions of electrocrystallization, that is, directed formation of the structure and texture, thickness, roughness and microhardness of chromium plating. The practical recommendations are given on the current and temperature regimes of chromium deposition and composition of baths used for the restoration and hardening of the machine parts. Moreover, the basic methods of machining allowances removal are analysed.

Missing facial parts computed by a morphable model and transferred directly to a polyamide laser-sintered prosthesis: an innovation study.

Science.gov (United States)

Mueller, A A; Paysan, P; Schumacher, R; Zeilhofer, H-F; Berg-Boerner, B-I; Maurer, J; Vetter, T; Schkommodau, E; Juergens, P; Schwenzer-Zimmerer, K

2011-12-01

Mirroring of missing facial parts and rapid prototyping of templates have become widely used in the manufacture of prostheses. However, mirroring is not applicable for central facial defects, and the manufacture of a template still requires labour-intensive transformation into the final facial prosthesis. We have explored innovative techniques to meet these remaining challenges. We used a morphable model of a face for the reconstruction of missing facial parts that did not have mirror images, and skin-coloured polyamide laser sintering for direct manufacture of the prosthesis. From the knowledge gleaned from a data set of 200 coloured, three-dimensional scans, we generated a missing nose that was statistically compatible with the remaining parts of the patient's face. The planned prosthesis was manufactured directly from biocompatible skin-coloured polyamide powder by selective laser sintering, and the prosthesis planning system produced a normal-looking reconstruction. The polyamide will need adjustable colouring, and we must be able to combine it with a self-curing resin to fulfil the requirements of realistic permanent use. Copyright © 2011 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Periodic safety analyses; Les essais periodiques

Energy Technology Data Exchange (ETDEWEB)

Gouffon, A; Zermizoglou, R

1990-12-01

The IAEA Safety Guide 50-SG-S8 devoted to 'Safety Aspects of Foundations of Nuclear Power Plants' indicates that operator of a NPP should establish a program for inspection of safe operation during construction, start-up and service life of the plant for obtaining data needed for estimating the life time of structures and components. At the same time the program should ensure that the safety margins are appropriate. Periodic safety analysis are an important part of the safety inspection program. Periodic safety reports is a method for testing the whole system or a part of the safety system following the precise criteria. Periodic safety analyses are not meant for qualification of the plant components. Separate analyses are devoted to: start-up, qualification of components and materials, and aging. All these analyses are described in this presentation. The last chapter describes the experience obtained for PWR-900 and PWR-1300 units from 1986-1989.

DISCRETIZATION APPROACH USING RAY-TESTING MODEL IN PARTING LINE AND PARTING SURFACE GENERATION

Institute of Scientific and Technical Information of China (English)

HAN Jianwen; JIAN Bin; YAN Guangrong; LEI Yi

2007-01-01

Surface classification, 3D parting line, parting surface generation and demoldability analysis which is helpful to select optimal parting direction and optimal parting line are involved in automatic cavity design based on the ray-testing model. A new ray-testing approach is presented to classify the part surfaces to core/cavity surfaces and undercut surfaces by automatic identifying the visibility of surfaces. A simple, direct and efficient algorithm to identify surface visibility is developed. The algorithm is robust and adapted to rather complicated geometry, so it is valuable in computer-aided mold design systems. To validate the efficiency of the approach, an experimental program is implemented. Case studies show that the approach is practical and valuable in automatic parting line and parting surface generation.

Is networking different with doctors working part-time? Differences in social networks of part-time and full-time doctors.

Science.gov (United States)

Heiligers, Phil J M; de Jong, Judith D; Groenewegen, Peter P; Hingstman, Lammert; Völker, Beate; Spreeuwenberg, Peter

2008-10-04

Part-time working is a growing phenomenon in medicine, which is expected to influence informal networks at work differently compared to full-time working. The opportunity to meet and build up social capital at work has offered a basis for theoretical arguments. Twenty-eight teams of medical specialists in the Netherlands, including 226 individuals participated in this study. Interviews with team representatives and individual questionnaires were used. Data were gathered on three types of networks: relationships of consulting, communication and trust. For analyses, network and multilevel applications were used. Differences between individual doctors and between teams were both analysed, taking the dependency structure of the data into account, because networks of individual doctors are not independent. Teams were divided into teams with and without doctors working part-time. Contrary to expectations we found no impact of part-time working on the size of personal networks, neither at the individual nor at the team level. The same was found regarding efficient reachability. Whereas we expected part-time doctors to choose their relations as efficiently as possible, we even found the opposite in intended relationships of trust, implying that efficiency in reaching each other was higher for full-time doctors. But we found as expected that in mixed teams with part-time doctors the frequency of regular communication was less compared to full-time teams. Furthermore, as expected the strength of the intended relationships of trust of part-time and full-time doctors was equally high. From these findings we can conclude that part-time doctors are not aiming at efficiency by limiting the size of networks or by efficient reachability, because they want to contact their colleagues directly in order to prevent from communication errors. On the other hand, together with the growth of teams, we found this strategy, focussed on reaching all colleagues, was diminishing. And our data

The Rise of Direct Democracy in Croatia: Balancing or Challenging Parliamentary Representation?

Directory of Open Access Journals (Sweden)

Butković Hrvoje

2017-03-01

Full Text Available In 2010 the Croatian Constitution was changed to lower the requirements for the implementation of direct democracy at the national level, in order to save the referendum on Croatia’s EU membership from possible failure. Since then, Croatia has witnessed a sharp increase in people’s initiatives that have managed to block a number of the government’s reform proposals. Therefore, the newly discovered appeal of direct democracy in Croatia has created a new environment for the operation of its representative democracy. Starting from theoretical notions, this paper analyses the practice of direct democracy in selected transitional countries, which could be instructive for Croatia. In its central part, the paper explores the obstacles that stand in the way of the efficient implementation of direct democracy in Croatia.

Hunting electroweakinos at future hadron colliders and direct detection experiments

Energy Technology Data Exchange (ETDEWEB)

Cortona, Giovanni Grilli di [SISSA - International School for Advanced Studies,Via Bonomea 265, I-34136 Trieste (Italy); INFN - Sezione di Trieste,via Valerio 2, I-34127 Trieste (Italy)

2015-05-07

We analyse the mass reach for electroweakinos at future hadron colliders and their interplay with direct detection experiments. Motivated by the LHC data, we focus on split supersymmetry models with different electroweakino spectra. We find for example that a 100 TeV collider may explore Winos up to ∼7 TeV in low scale gauge mediation models or thermal Wino dark matter around 3 TeV in models of anomaly mediation with long-lived Winos. We show moreover how collider searches and direct detection experiments have the potential to cover large part of the parameter space even in scenarios where the lightest neutralino does not contribute to the whole dark matter relic density.

Direct-drive shock-ignition for the Laser MégaJoule

Directory of Open Access Journals (Sweden)

Canaud B.

2013-11-01

Full Text Available We present a review of direct-drive shock ignition studies done as an alternative for the Laser MégaJoule (LMJ. One and two dimensional systematic analyses of HiPER-like shock-ignited target designs are performed for the fuel assembly irradiation uniformity using the whole LMJ configuration or a part of the facility, and for the uniformity of the ignitor spike. High-gain shock-ignition is shown to be possible with intensity of each quad less than 1015 W/cm2 but low modes asymmetries displace the power required in the ignitor spike towards higher powers. Shock-ignition of Direct-Drive Double-Shell non-cryogenic targets is also addressed.

Influencing Work-Related Learning: The Role of Job Characteristics and Self-Directed Learning Orientation in Part-Time Vocational Education

Science.gov (United States)

Gijbels, David; Raemdonck, Isabel; Vervecken, Dries

2010-01-01

Based on the Demand-Control-Support (DCS) model, the present paper aims to investigate the influence of job characteristics such as job demands, job control, social support at work and self-directed learning orientation on the work-related learning behaviour of workers. The present study was conducted in a centre for part-time vocational education…

Direct observations and analyses of dislocation substructures in the α phase of an α/β Ti-alloy formed by nanoindentation

International Nuclear Information System (INIS)

Viswanathan, G.B.; Lee, Eunha; Maher, Dennis M.; Banerjee, S.; Fraser, Hamish L.

2005-01-01

The hardness of α-titanium grains as a function of both indentation depth and orientation has been assessed using nanoindentation. Direct observations and analyses of the dislocation substructures have been achieved by cutting thin-foil membranes exactly through given indents with a dual-beam focused-ion-beam instrument and from diffraction-contrast experiments in a transmission electron microscope. It was found, as expected, that the hardness varied with the depth of indentation. Regarding the orientation dependence of hardness, the nature of the statistically stored dislocations as well as that of the geometrically necessary dislocations has been identified. Thus, the occurrence of the majority of the former dislocations can be predicted on the basis of Schmid's law, while noting the presence of minor densities of other dislocations required presumably because of the arbitrary shape change imposed by the nanoindenter. The geometrically necessary dislocations have been identified as the appropriate combinations of slip dislocations such that an overall displacement parallel to the direction of the indentation results

CONTAIN code analyses of direct containment heating experiments

International Nuclear Information System (INIS)

Williams, D.C.; Griffith, R.O.; Tadios, E.L.; Washington, K.E.

1995-01-01

In some nuclear reactor core-melt accidents, a potential exists for molten core-debris to be dispersed into the containment under high pressure. Resulting energy transfer to the containment atmosphere can pressurize the containment. This process, known as direct containment heating (DCH), has been the subject of extensive experimental and analytical programs sponsored by the U.S. Nuclear Regulatory Commission (NRC). The DCH modeling has been an important focus for the development of the CONTAIN code. Results of a detailed independent peer review of the CONTAIN code were published recently. This paper summarizes work performed in support of the peer review in which the CONTAIN code was applied to analyze DCH experiments. Goals of this work were comparison of calculated and experimental results, CONTAIN DCH model assessment, and development of guidance for code users, including development of a standardized input prescription for DCH analysis

Analyses of direct and indirect impacts of a positive list system on pharmaceutical R&D investments.

Science.gov (United States)

Han, Euna; Kim, Tae Hyun; Jeung, Myung Jin; Lee, Eui-Kyung

2013-07-01

The South Korean government recently enacted a Positive List System (PLS) as a major change of the national formulary listing system and reimbursed prices for pharmaceutical products. Regardless of the primary goal of the PLS, its implementation might have spillover effects by influencing the pharmaceutical industry's research and development (R&D), potentially leading to a variety of responses by firms in relation to their R&D activities. We investigated the spillover effect of the PLS on R&D investments of the pharmaceutical industry in Korea through both direct and indirect channels, examining the influence of the PLS on sales profit and cash flow. Data from 9 years (5 before and 4 after PLS implementation) were drawn from the financial statements of firms whose stocks were exchanged in 2 official stock markets in Korea (526 firms) and additional pharmaceutical firms whose financial performance was officially audited by external reviewers (263 firms). Longitudinal analyses were conducted, using the panel nature of the data to control for permanent unobserved firm heterogeneity. Our results showed that the PLS was directly associated with R&D investments. In contrast, its indirect impacts stemming from the influence on sales profit and cash flow were minimal and statistically nonsignificant. The gross impact of the PLS on R&D investments increased moving further from the enactment year; R&D investments were reduced by 18.3% to 25.8% in 2009-2010 (compared with before PLS implementation) in the firm fixed-effects model. We also found that such negative direct and gross impacts of the PLS on R&D investments were significant only in firms without newly developed chemical entities. Considering the gross negative impact of the PLS on R&D investments of pharmaceutical firms and the heterogeneous response of these firms by the R&D activities, governmental efforts of cost-containment may need to consider the spillover impact of the PLS on pharmaceutical innovation

Analysis and evaluation of GAVE chains. Part 1 of 3. Management summary; Analyse en evaluatie van GAVE-ketens. Deel 1 van 3. Management summary

Energy Technology Data Exchange (ETDEWEB)

Van den Heuvel, E.J.M.T.

1999-12-01

This main report contains a summary of the detailed findings of the analysis, evaluation, and integration of Novem GAVE options. The details are presented in the final report (part 2) in the form of copies of overhead sheets. That report aims at the reader who is interested in the detailed findings, as well as an overview of the results. For readers who are mainly interested in the high-level results, and are comfortable with Dutch, there is this short text summary of our results. Readers who are interested in the underlying data and detailed assumptions are encouraged to consult the appendix to this report, entitled 'Analyse en evaluatie van GAVE-ketens, appendices' (part 3)

Laser Beam Focus Analyser

DEFF Research Database (Denmark)

Nielsen, Peter Carøe; Hansen, Hans Nørgaard; Olsen, Flemming Ove

2007-01-01

the obtainable features in direct laser machining as well as heat affected zones in welding processes. This paper describes the development of a measuring unit capable of analysing beam shape and diameter of lasers to be used in manufacturing processes. The analyser is based on the principle of a rotating......The quantitative and qualitative description of laser beam characteristics is important for process implementation and optimisation. In particular, a need for quantitative characterisation of beam diameter was identified when using fibre lasers for micro manufacturing. Here the beam diameter limits...... mechanical wire being swept through the laser beam at varying Z-heights. The reflected signal is analysed and the resulting beam profile determined. The development comprised the design of a flexible fixture capable of providing both rotation and Z-axis movement, control software including data capture...

Thermodynamic and thermoeconomic analyses of a trigeneration (TRIGEN) system with a gas-diesel engine: Part II - An application

International Nuclear Information System (INIS)

Balli, Ozgur; Aras, Haydar; Hepbasli, Arif

2010-01-01

The paper is Part 2 of the study on the thermodynamic and thermoeconomic analyses of trigeneration system with a gas-diesel engine. In Part 1, thermodynamic and thermoeconomic methodologies for such a comprehensive analysis were provided, while this paper applies the developed methodology to an actual TRIGEN system with a rated output of 6.5 MW gas-diesel engine installed in the Eskisehir Industry Estate Zone, Turkey. Energy and exergy efficiencies, equivalent electrical efficiency, the Public Utility Regulatory Policies Act (PURPA) efficiency, fuel energy saving ratio, fuel exergy saving ratio and other thermodynamic performance parameters are determined for the TRIGEN system. The efficiencies of energy, exergy, PURPA and equivalent electrical efficiency of the entire system are found to be 58.97%, 36.13%, 45.7% and 48.53%, respectively. For the whole system and its components, exergetic cost allocations and various exergoeconomic performance parameters are calculated using the exergoeconomic analysis based on specific exergy costing method (SPECO). The specific unit exergetic cost of the net electrical power, heat energy in the Factory Heating Center (FHC) heating, heat energy in the Painting Factory Heating (PFH) and chilled water in the absorption chiller (ACh) produced by the TRIGEN system are obtained to be 45.94 US$/GJ, 29.98 US$/GJ, 42.42 US$/GJ and 167.52 US$/GJ, respectively.

A vector matching method for analysing logic Petri nets

Science.gov (United States)

Du, YuYue; Qi, Liang; Zhou, MengChu

2011-11-01

Batch processing function and passing value indeterminacy in cooperative systems can be described and analysed by logic Petri nets (LPNs). To directly analyse the properties of LPNs, the concept of transition enabling vector sets is presented and a vector matching method used to judge the enabling transitions is proposed in this article. The incidence matrix of LPNs is defined; an equation about marking change due to a transition's firing is given; and a reachable tree is constructed. The state space explosion is mitigated to a certain extent from directly analysing LPNs. Finally, the validity and reliability of the proposed method are illustrated by an example in electronic commerce.

Architecture for Direct Model-to-Part CNC Manufacturing

Directory of Open Access Journals (Sweden)

Gilbert Poon

2006-02-01

Full Text Available In the traditional paradigm for Computer Numerical Control (CNC machining, tool paths are programmed offline from the CNC machine using the Computer-Aided Design (CAD model of the workpiece. The program is downloaded to the CNC controller and the part is then machined. Since a CAD model does not exist inside the CNC controller, it is unaware of the part to be machined and cannot predict or prevent errors. Not only is this paradigm labor intensive, it can lead to catastrophic damage if there are errors during machining. This paper presents a new concept for CNC machine control whereby a CAD model of the workpiece exists inside the controller and the tool positions are generated in real-time by the controller using the computer's graphics hardware without human intervention. The new concept was implemented on an experimental lathe machine specifically designed to machine complicated ornamental wood workpieces with a personal computer. An example workpiece was machined and measured using a 3D camera. The measured data was registered to the CAD model to evaluate machining accuracy.

Pediatricians working part-time: past, present, and future.

Science.gov (United States)

Cull, William L; Mulvey, Holly J; O'Connor, Karen G; Sowell, Debra R; Berkowitz, Carol D; Britton, Carmelita V

2002-06-01

Pediatrics has consistently attracted a large number of women. Although the majority of practicing pediatricians are male, female pediatricians will soon constitute the majority. The challenge to balance personal and professional life is of particular concern to women, and part-time positions may provide a potential solution. To examine how many pediatricians currently work part-time, to examine trends in part-time employment from 1993 to present, to determine pediatric residents' interest in part-time employment, and to identify perceived barriers to part-time work. Two data sources were used for these analyses. The first was an American Academy of Pediatrics Periodic Survey from 1993 and 2000 asking a combined national sample of 3218 American Academy of Pediatrics members about their employment status. Multiple mailings were conducted for each survey producing an overall response rate of 62%. The second data source was a survey asking a national random sample of 500 pediatric residents completing training in 2000 about their job search experiences and attitudes toward part-time employment. Four mailings of this survey were completed, and responses were obtained from 71% of residents. The percentage of pediatricians working part-time increased from 11% in 1993 to 15% in 2000. This increase did not exceed what would be expected based on the rise in the percentage of pediatricians who are female from 36% in 1993 to 45% in 2000. On average, pediatricians working part-time provided 36% fewer direct patient care hours than full-time pediatricians (42 hours vs 27 hours). No statistically significant difference in direct patient care hours was apparent between male and female pediatricians working full-time. Female residents were more likely than male residents to consider part-time or reduced-hours positions (42% vs 14%) and to accept part-time or reduced-hours positions (14% vs 3%). Also, considerably more female residents (58%) than male residents (15%) indicated that

Potential Dimension Yields From Direct Processing

Science.gov (United States)

Wenjie Lin; D. Earl Kline; Philip A. Araman

1994-01-01

As the price of timber increases and environmental leigslation limits harvestable log volumes, the process of converting logs directly into dimension parts needs further exploration. Direct processing converts logs directly into rough green dimension parts without the intermediate steps of lumber manufacturing, grading, trading, shipping and drying. A major attraction...

Quasi-direct numerical simulation of a pebble bed configuration, Part-II: Temperature field analysis

International Nuclear Information System (INIS)

Shams, A.; Roelofs, F.; Komen, E.M.J.; Baglietto, E.

2013-01-01

Highlights: ► Quasi direct numerical simulations (q-DNSs) of a pebble bed configuration have been performed. ► This q-DNS database may serve as a reference for the validation of different turbulence modeling approaches. ► A wide range of qualitative and quantitative data throughout the computational domain has been generated. ► Results for mean, RMS of temperature and respective turbulent heat fluxes are extensively reported in this paper. -- Abstract: Good prediction of the flow and heat transfer phenomena in the pebble bed core of a high temperature reactor (HTR) is a challenge for available turbulence models, which still require to be validated. While experimental data are generally desirable in this validation process, due to the complex geometric configuration and measurement difficulties, a very limited amount of data is currently available. On the other hand, direct numerical simulation (DNS) is considered an accurate simulation technique, which may serve as an alternative for validating turbulence models. In the framework of the present study, quasi-direct numerical simulation (q-DNS) of a single face cubic centered pebble bed is performed, which will serve as a reference for the validation of different turbulence modeling approaches in order to perform calculations for a randomly arranged pebble bed. These simulations were performed at a Reynolds number of 3088, based on pebble diameter, with a porosity level of 0.42. Results related to flow field (mean, RMS and covariance of velocity) have been presented in Part-I, whereas, in the present article, we focus our attention to the analysis of the temperature field. A wide range of qualitative and quantitative data for the thermal field (mean, RMS and turbulent heat flux) has been generated

Vibro-spring particle size distribution analyser

International Nuclear Information System (INIS)

Patel, Ketan Shantilal

2002-01-01

This thesis describes the design and development of an automated pre-production particle size distribution analyser for particles in the 20 - 2000 μm size range. This work is follow up to the vibro-spring particle sizer reported by Shaeri. In its most basic form, the instrument comprises a horizontally held closed coil helical spring that is partly filled with the test powder and sinusoidally vibrated in the transverse direction. Particle size distribution data are obtained by stretching the spring to known lengths and measuring the mass of the powder discharged from the spring's coils. The size of the particles on the other hand is determined from the spring 'intercoil' distance. The instrument developed by Shaeri had limited use due to its inability to measure sample mass directly. For the device reported here, modifications are made to the original configurations to establish means of direct sample mass measurement. The feasibility of techniques for measuring the mass of powder retained within the spring are investigated in detail. Initially, the measurement of mass is executed in-situ from the vibration characteristics based on the spring's first harmonic resonant frequency. This method is often erratic and unreliable due to the particle-particle-spring wall interactions and the spring bending. An much more successful alternative is found from a more complicated arrangement in which the spring forms part of a stiff cantilever system pivoted along its main axis. Here, the sample mass is determined in the 'static mode' by monitoring the cantilever beam's deflection following the wanton termination of vibration. The system performance has been optimised through the variations of the mechanical design of the key components and the operating procedure as well as taking into account the effect of changes in the ambient temperature on the system's response. The thesis also describes the design and development of the ancillary mechanisms. These include the pneumatic

Visual servoing in medical robotics: a survey. Part I: endoscopic and direct vision imaging - techniques and applications.

Science.gov (United States)

Azizian, Mahdi; Khoshnam, Mahta; Najmaei, Nima; Patel, Rajni V

2014-09-01

Intra-operative imaging is widely used to provide visual feedback to a clinician when he/she performs a procedure. In visual servoing, surgical instruments and parts of tissue/body are tracked by processing the acquired images. This information is then used within a control loop to manoeuvre a robotic manipulator during a procedure. A comprehensive search of electronic databases was completed for the period 2000-2013 to provide a survey of the visual servoing applications in medical robotics. The focus is on medical applications where image-based tracking is used for closed-loop control of a robotic system. Detailed classification and comparative study of various contributions in visual servoing using endoscopic or direct visual images are presented and summarized in tables and diagrams. The main challenges in using visual servoing for medical robotic applications are identified and potential future directions are suggested. 'Supervised automation of medical robotics' is found to be a major trend in this field. Copyright © 2013 John Wiley & Sons, Ltd.

Strategic analyses in nursing schools: attracting, educating, and graduating more nursing students: part I--strengths, weaknesses, opportunities, and threats analysis.

Science.gov (United States)

Crow, Stephen M; Hartman, Sandra J; Mahesh, Sathiadev; McLendon, Christy L; Henson, Steve W; Jacques, Paul

2008-01-01

The shortage of nurses in the United States remains a persistent problem. Faced with this reality, nursing programs in colleges and universities continue to struggle to expand enrollment levels to meet the spiraling demand. This research uses familiar tools in strategic management: the strengths, weaknesses, opportunities, and threats (SWOT) analysis and stakeholder analysis as initial steps to draw more students to the profession of nursing. In a 2-round modified Delphi survey, chief administrators of schools of nursing identify the main SWOT of schools of nursing and the important internal and external stakeholders that influence nursing school success. The authors of the research suggest ways to use that knowledge to increase the enrollment level of nursing students. Part I of this research focuses on the SWOT analyses.

Modelling and analysing oriented fibrous structures

International Nuclear Information System (INIS)

Rantala, M; Lassas, M; Siltanen, S; Sampo, J; Takalo, J; Timonen, J

2014-01-01

A mathematical model for fibrous structures using a direction dependent scaling law is presented. The orientation of fibrous nets (e.g. paper) is analysed with a method based on the curvelet transform. The curvelet-based orientation analysis has been tested successfully on real data from paper samples: the major directions of fibrefibre orientation can apparently be recovered. Similar results are achieved in tests on data simulated by the new model, allowing a comparison with ground truth

Good analytical practice: statistics and handling data in biomedical science. A primer and directions for authors. Part 1: Introduction. Data within and between one or two sets of individuals.

Science.gov (United States)

Blann, A D; Nation, B R

2008-01-01

The biomedical scientist is bombarded on a daily basis by information, almost all of which refers to the health status of an individual or groups of individuals. This review is the first of a two-part article written to explain some of the issues related to the presentation and analysis of data. The first part focuses on types of data and how to present and analyse data from an individual or from one or two groups of persons. The second part will examine data from three or more sets of persons, what methods are available to allow this analysis (i.e., statistical software packages), and will conclude with a statement on appropriate descriptors of data, their analyses, and presentation for authors considering submission of their data to this journal.

Recurring part arrangements in shape collections

KAUST Repository

Zheng, Youyi; Cohen-Or, Daniel; Averkiou, Melinos; Mitra, Niloy J.

2014-01-01

Extracting semantically related parts across models remains challenging, especially without supervision. The common approach is to co-analyze a model collection, while assuming the existence of descriptive geometric features that can directly identify related parts. In the presence of large shape variations, common geometric features, however, are no longer sufficiently descriptive. In this paper, we explore an indirect top-down approach, where instead of part geometry, part arrangements extracted from each model are compared. The key observation is that while a direct comparison of part geometry can be ambiguous, part arrangements, being higher level structures, remain consistent, and hence can be used to discover latent commonalities among semantically related shapes. We show that our indirect analysis leads to the detection of recurring arrangements of parts, which are otherwise difficult to discover in a direct unsupervised setting. We evaluate our algorithm on ground truth datasets and report advantages over geometric similarity-based bottom-up co-segmentation algorithms. © 2014 The Author(s) Computer Graphics Forum © 2014 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

Recurring part arrangements in shape collections

KAUST Repository

Zheng, Youyi

2014-05-01

Extracting semantically related parts across models remains challenging, especially without supervision. The common approach is to co-analyze a model collection, while assuming the existence of descriptive geometric features that can directly identify related parts. In the presence of large shape variations, common geometric features, however, are no longer sufficiently descriptive. In this paper, we explore an indirect top-down approach, where instead of part geometry, part arrangements extracted from each model are compared. The key observation is that while a direct comparison of part geometry can be ambiguous, part arrangements, being higher level structures, remain consistent, and hence can be used to discover latent commonalities among semantically related shapes. We show that our indirect analysis leads to the detection of recurring arrangements of parts, which are otherwise difficult to discover in a direct unsupervised setting. We evaluate our algorithm on ground truth datasets and report advantages over geometric similarity-based bottom-up co-segmentation algorithms. © 2014 The Author(s) Computer Graphics Forum © 2014 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.

Comparison of inoculant and indigenous rhizobial dinitrogen fixation in cowpeas by direct nitrogen-15 analyses

International Nuclear Information System (INIS)

ElHassan, G.A.; Focht, D.D.

1986-01-01

Soil that contained 15 N enriched organic matter (0.461 % 15 N) was used to determine competitiveness of six strains at different logarithmic inoculum densities against indigenous rhizobia and against a previous surviving inoculant (strain P132). Analyses of N content of plant tissues by direct 15 N technique showed that cowpeas (Vigna unguiculata L. Walp.) were capable of deriving 60 to 98% of shoot N from N 2 fixation. The two fast-growing strains (176A26 and 176A28) were poorer competitors and fixed less N 2 compared to the other slow-growing strains. Inoculum density had no effect upon yield response of cowpeas, but inoculation with strains P132, 401, and 22A1 effected greater seed yield, shoot dry matter, total N, and percentage of N derived from fixation (86-98%) than other strains and the uninoculated control (60-73%). By contrast, N 2 fixation and yield parameters in inoculated cowpeas were not significantly different from inoculated controls that contained residual P132 from a previous inoculum study. The higher hydrogen uptake (Hup) efficiency of nodules containing residual P132 (98 ± 2%) facilitated presumptive identification of P132 (100% ± 0 Hup efficiency axenically) as the surviving and infecting inoculant strain since nodules infected by indigenous rhizobia had lower Hup efficiencies (88 ± 2%)

Design and implementation of an automatic acquisition card with direct memory incrementing intended for a multichannel analyser

International Nuclear Information System (INIS)

Al-Ani, Tarik Hesen

1984-01-01

This study presents a contribution to the implementation of a multichannel analyser, based on recent technology in order to give elaborated results to the user. This instrument will be designed using modular cards compatible with an Intel, Multi-bus System. The main purpose of this thesis consists in the study and design of the logical card establishing automatically an histogram in the memory of a micro-computer (Direct Memory Increment or DMI). This card allows the connection of up to four analog to digital converters and does the incrementing of the data in memory at the address delivered by an analog to digital Wilkinson type converter (400 MHz) designed at CEA. It allows: - 4 independent inputs working simultaneously with an average input rate of 87500 events/second for 16000 channels of 2 32 bits and with a time resolution of 1 μs; - 3 acquisition modes: histogram, multi-scaling and list; - calculation of the real and live times independently for the 4 inputs. In addition, this card provides the interfacing capability for a line printer, a sample driver and a 'mouse'. (author) [fr

Direct selling particularities

OpenAIRE

Greifová, Daniela

2009-01-01

Bachelor thesis is focused on the parcularities of direct selling, self regulation of this industry, multi-level marketing which is the most used sales method in the field of direct selling. The part of the thesis is dedicated to the issue of customer psychology that is very important for achieving success in direct selling. Main goals are to provide readers with the general view of direct selling and analysis of growing possibilities of the industry in the future.

Influence of Injector Location on Part-Load Performance Characteristics of Natural Gas Direct-Injection in a Spark Ignition Engine

Energy Technology Data Exchange (ETDEWEB)

Sevik, James [Argonne National Lab. (ANL), Argonne, IL (United States); Pamminger, Michael [Argonne National Lab. (ANL), Argonne, IL (United States); Wallner, Thomas [Argonne National Lab. (ANL), Argonne, IL (United States); Scarcelli, Riccardo [Argonne National Lab. (ANL), Argonne, IL (United States); Boyer, Brad [Ford Motor Co., Detroit, MI (United States); Wooldridge, Steven [Ford Motor Co., Detroit, MI (United States); Hall, Carrie [Illinois Inst. of Technology, Chicago, IL (United States); Miers, Scott [Michigan Technological Univ., Houghton, MI (United States)

2016-04-05

Interest in natural gas as an alternative fuel source to petroleum fuels for light-duty vehicle applications has increased due to its domestic availability and stable price compared to gasoline. With its higher hydrogen-to-carbon ratio, natural gas has the potential to reduce engine out carbon dioxide emissions, which has shown to be a strong greenhouse gas contributor. For part-load conditions, the lower flame speeds of natural gas can lead to an increased duration in the inflammation process with traditional port-injection. Direct-injection of natural gas can increase in-cylinder turbulence and has the potential to reduce problems typically associated with port-injection of natural gas, such as lower flame speeds and poor dilution tolerance. A study was designed and executed to investigate the effects of direct-injection of natural gas at part-load conditions. Steady-state tests were performed on a single-cylinder research engine representative of current gasoline direct-injection engines. Tests were performed with direct-injection in the central and side location. The start of injection was varied under stoichiometric conditions in order to study the effects on the mixture formation process. In addition, exhaust gas recirculation was introduced at select conditions in order to investigate the dilution tolerance. Relevant combustion metrics were then analyzed for each scenario. Experimental results suggest that regardless of the injector location, varying the start of injection has a strong impact on the mixture formation process. Delaying the start of injection from 300 to 120°CA BTDC can reduce the early flame development process by nearly 15°CA. While injecting into the cylinder after the intake valves have closed has shown to produce the fastest combustion process, this does not necessarily lead to the highest efficiency, due to increases in pumping and wall heat losses. When comparing the two injection configurations, the side location shows the best

Does climate directly influence NPP globally?

Science.gov (United States)

Chu, Chengjin; Bartlett, Megan; Wang, Youshi; He, Fangliang; Weiner, Jacob; Chave, Jérôme; Sack, Lawren

2016-01-01

The need for rigorous analyses of climate impacts has never been more crucial. Current textbooks state that climate directly influences ecosystem annual net primary productivity (NPP), emphasizing the urgent need to monitor the impacts of climate change. A recent paper challenged this consensus, arguing, based on an analysis of NPP for 1247 woody plant communities across global climate gradients, that temperature and precipitation have negligible direct effects on NPP and only perhaps have indirect effects by constraining total stand biomass (Mtot ) and stand age (a). The authors of that study concluded that the length of the growing season (lgs ) might have a minor influence on NPP, an effect they considered not to be directly related to climate. In this article, we describe flaws that affected that study's conclusions and present novel analyses to disentangle the effects of stand variables and climate in determining NPP. We re-analyzed the same database to partition the direct and indirect effects of climate on NPP, using three approaches: maximum-likelihood model selection, independent-effects analysis, and structural equation modeling. These new analyses showed that about half of the global variation in NPP could be explained by Mtot combined with climate variables and supported strong and direct influences of climate independently of Mtot , both for NPP and for net biomass change averaged across the known lifetime of the stands (ABC = average biomass change). We show that lgs is an important climate variable, intrinsically correlated with, and contributing to mean annual temperature and precipitation (Tann and Pann ), all important climatic drivers of NPP. Our analyses provide guidance for statistical and mechanistic analyses of climate drivers of ecosystem processes for predictive modeling and provide novel evidence supporting the strong, direct role of climate in determining vegetation productivity at the global scale. © 2015 John Wiley & Sons Ltd.

Thermoeconomic and environmental analyses of a low water consumption combined steam power plant and refrigeration chillers – Part 1: Energy and economic modelling and analysis

International Nuclear Information System (INIS)

Ifaei, Pouya; Rashidi, Jouan; Yoo, ChangKyoo

2016-01-01

Highlights: • Proposing two energy systems by combining refrigeration chillers and power plants. • Model-based comparison of the systems through energy and economic standpoints. • Reducing total annual costs of the base system up to 4.7% by process integration. • Decreasing the water loss in wet cooling towers by up to 18% in the proposed system. • Suggesting a water-fuel economic management strategy based on parametric analysis. - Abstract: Two novel configurations are proposed to replace the conventional Rankine cycle based steam power plants (SPP) with natural draft wet cooling towers (NDWCT) as cooling units. Closed feedwater heater unit of the base SPP-NDWCT system is eliminated in order to combine a vapor compression refrigeration (VCR) and an absorption heat pump (ABHP) with the base SPP-NDWCT system. Both VCR-SPP-NDWCT and ABHP-SPP-NDWCT systems are integrated to decrease the NDWCT load which could result in water losses decrease. In part one of the presented two-part paper, model-based energy and economic analyses are performed to compare systems performance and applicability. The temperature difference at pinch point and temperature difference between the hot and cold sides of the heat exchangers which were used for systems integration in VCR-SPP-NDWCT, and the absorber pressure and temperature in ABHP-SPP-NDWCT system are studied using parametric analysis procedure. A water-fuel management strategy is also introduced for the ABHP-SPP-NDWCT system according to the influence of the absorber pressure changes on system water and fuel consumption. In part 2, environmental and thermoeconomic analyses are performed to complete a comprehensive study on designing steam power plants. The results of part 1 showed that water losses and total annual costs decreased by 1–18% and 0–4.7% for the ABHP-SPP-NDWCT system but increased by 11% and 60% for the VCR-SPP-NDWCT system, respectively.

Defining interdisciplinarity and indentifying Research directions in Jani Christou’s Strychnine lady

Directory of Open Access Journals (Sweden)

Maria Yerosimou

2014-09-01

Full Text Available Jani Christou was a major Greek composer, whose unusual, yet promising career was brought to an end after his untimely death in 1970 at the age of 44. His challenging and speculative output has intrigued generation of young music scholars; however, J. Christou’s work remains imperfectly and only patchily known and understood, especially outside Greece. This is partly because of the interdisciplinary nature of his late works which reduces the possibility of potential researchers who will academically establish J. Christou’s distinguished output. The aim of the present paper is to present and analyse parts of Strychnine Lady, a work composed in 1967 in order to propose research directions in an effort to confirm J. Christou’s posthumous reputation.

Tensile properties and microstructure of direct metal laser-sintered TI6AL4V (ELI alloy

Directory of Open Access Journals (Sweden)

Moletsane, M. G.

2016-11-01

Full Text Available Direct metal laser sintering (DMLS is an additive manufacturing technology used to melt metal powder by high laser power to produce customised parts, light-weight structures, or other complex objects. During DMLS, powder is melted and solidified track-by-track and layer-by-layer; thus, building direction can influence the mechanical properties of DMLS parts. The mechanical properties and microstructure of material produced by DMLS can depend on the powder properties, process parameters, scanning strategy, and building geometry. In this study, the microstructure, tensile properties, and porosity of DMLS Ti6Al4V (ELI horizontal samples were analysed. Defect analysis by CT scans in pre-strained samples was used to detect the crack formation mechanism during tensile testing of as-built and heat-treated samples. The mechanical properties of the samples before and after stress relieving are discussed.

Comparison with Russian analyses of meteor impact

Energy Technology Data Exchange (ETDEWEB)

Canavan, G.H.

1997-06-01

The inversion model for meteor impacts is used to discuss Russian analyses and compare principal results. For common input parameters, the models produce consistent estimates of impactor parameters. Directions for future research are discussed and prioritized.

Pipeline external corrosion direct assessment methodology: lessons learned - part 1

Energy Technology Data Exchange (ETDEWEB)

Kowalski, Angel R. [DNV Columbus, Inc., OH (United States)

2009-07-01

DNV Columbus (Former CC Technologies) played a key role in the development of Direct Assessment (DA) methodologies, providing leadership in the NACE technical committees charged with development of DA standards. Since the first publication of NACE Standard RP-0502-2002, External Corrosion Direct Assessment (ECDA) has been successfully applied over a great number of pipelines to evaluate the impact of external corrosion on the pipeline integrity. This paper summarizes the results of applying ECDA over a selected number of underground pipelines and presents interesting facts about the methodology. (author)

Residual stress in TI6AL4V objects produced by direct metal laser sintering

Directory of Open Access Journals (Sweden)

Van Zyl, Ian

2016-12-01

Full Text Available Direct Metal Laser Sintering produces 3D objects using a layer-by- layer method in which powder is deposited in thin layers. Laser beam scans over the powder fusing powder particles as well as the previous layer. High-concentration of laser energy input leads to high thermal gradients which induce residual stress within the as- built parts. Ti6Al4V (ELI samples have been manufactured by EOSINT M280 system at prescribed by EOS process-parameters. Residual stresses were measured by XRD method. Microstructure, values and directions of principal stresses inTi6Al4V DMLS samples were analysed.

Rapid screening and distribution of bioactive compounds in different parts of Berberis petiolaris using direct analysis in real time mass spectrometry

Directory of Open Access Journals (Sweden)

Awantika Singh

2015-10-01

Full Text Available Berberis petiolaris Wall. ex G. Don, an unexplored medicinal plant belonging to the family Berberidaceae, is a large deciduous shrub found in Western Himalaya between 1800–3000 m. Chemical profiling of fruit, leaf, root and stem was done by direct analysis in real time mass spectrometry followed by multivariate analysis for discrimination among the plant parts. The bioactive compounds, including magnoflorine, berberine, jatrorrhizine, thalifendine/berberrubine, demethyleneberberine, reticuline, 8-oxoberberine, N-methyltetrahydroberberine, tetrahydropalmatine, tetrahydroberberine and palmatine, were identified by their exact mass measurement and the corresponding molecular formula of each compound. A comparative study of distribution pattern for all these bioactive alkaloids showed qualitative and quantitative variations in different parts of B. petiolaris. Principal component analysis clearly discriminated each part of B. petiolaris plant. Keywords: Berberis petiolaris, Alkaloids, Profiling, DART–TOF–MS, Statistical analysis

Non-destructive NIR-FT-Raman analyses in practice. Part I. Analyses of plants and historic textiles.

Science.gov (United States)

Andreev, G N; Schrader, B; Schulz, H; Fuchs, R; Popov, S; Handjieva, N

2001-12-01

Non-destructive analysis of natural substances in plants as well as of old dyed textiles by Raman spectroscopy has not been possible using conventional techniques. Exciting lines from the visible part of the spectrum produced photochemical and thermal decomposition of the objects as well as strong fluorescence. Using Nd:YAG laser excitation at 1,064 nm together with a special sample arrangement and interferometric recording, various polyacetylenes in Aethusa cynapium and in chamomile (Chamomilla recutita) and the main valuable substances in gentian species (Gentiana lutea and G. punctata), curcuma roots (Curcuma longa), cinnamon (Cinnamomum zeylanicum), fennel (Foeniculum vulgare), clove (Caryophyllus aromaticus), and ginger (Zingiber officinale) were analyzed non-destructively and discussed in comparison with the corresponding pure standard compounds. We further analyzed non-destructively the FT Raman spectra of collections of historical textiles and lakes used for dyeing. It is possible to distinguish the main dye component non-destructively by using Raman bands.

Chemical analyses of rocks, minerals, and detritus, Yucca Mountain--Preliminary report, special report No. 11

International Nuclear Information System (INIS)

Hill, C.A.; Livingston, D.E.

1993-09-01

This chemical analysis study is part of the research program of the Yucca Mountain Project intended to provide the State of Nevada with a detailed assessment of the geology and geochemistry of Yucca Mountain and adjacent regions. This report is preliminary in the sense that more chemical analyses may be needed in the future and also in the sense that these chemical analyses should be considered as a small part of a much larger geological data base. The interpretations discussed herein may be modified as that larger data base is examined and established. All of the chemical analyses performed to date are shown in Table 1. There are three parts to this table: (1) trace element analyses on rocks (limestone and tuff) and minerals (calcite/opal), (2) rare earth analyses on rocks (tuff) and minerals (calcite/opal), and (3) major element analyses + CO 2 on rocks (tuff) and detritus sand. In this report, for each of the three parts of the table, the data and its possible significance will be discussed first, then some overall conclusions will be made, and finally some recommendations for future work will be offered

Fracture Mechanics Analyses of the Slip-Side Joggle Regions of Wing-Leading Edge Panels

Science.gov (United States)

Raju, Ivatury S.; Knight, Norman F., Jr.; Song, Kyongchan; Phillips, Dawn R.

2010-01-01

The Space Shuttle Orbiter wing comprises of 22 leading edge panels on each side of the wing. These panels are part of the thermal protection system that protects the Orbiter wings from extreme heating that take place on the reentry in to the earth atmosphere. On some panels that experience extreme heating, liberation of silicon carbon (SiC) coating was observed on the slip side regions of the panels. Global structural and local fracture mechanics analyses were performed on these panels as a part of the root cause investigation of this coating liberation anomaly. The wing-leading-edge reinforced carbon-carbon (RCC) panels, Panel 9, T-seal 10, and Panel 10, are shown in Figure 1 and the progression of the stress analysis models is presented in Figure 2. The global structural analyses showed minimal interaction between adjacent panels and the T-seal that bridges the gap between the panels. A bounding uniform temperature is applied to a representative panel and the resulting stress distribution is examined. For this loading condition, the interlaminar normal stresses showed negligible variation in the chord direction and increased values in the vicinity of the slip-side joggle shoulder. As such, a representative span wise slice on the panel can be taken and the cross section can be analyzed using plane strain analysis.

Process for carrying out analyses based on concurrent reactions

Energy Technology Data Exchange (ETDEWEB)

Glover, J S; Shepherd, B P

1980-01-03

The invention refers to a process for carrying out analyses based on concurrent reactions. A part of a compound to be analysed is subjected with a standard quantity of this compound in a labelled form to a common reaction with a standard quantity of a reagent, which must be less than the sum of the two parts of the reacting compound. The parts of the marked reaction compound and the labelled final compound resulting from the concurrence are separated in a tube (e.g. by centrifuging) after forced phase change (precipitation, absorption etc.) and the radio-activity of both phases in contact is measured separately. The shielded measuring device developed for this and suitable for centrifuge tubes of known dimensions is also included in the patent claims. The insulin concentration of a defined serum is measured as an example of the applications of the method (Radioimmunoassay).

CT assessment-based direct surgical resection of part-solid nodules with solid component larger than 5 mm without preoperative biopsy: experience at a single tertiary hospital

Energy Technology Data Exchange (ETDEWEB)

Lee, Sang Min [Seoul National University College of Medicine, Department of Radiology, Seoul (Korea, Republic of); Seoul National University Medical Research Center, Institute of Radiation Medicine, Seoul (Korea, Republic of); Asan Medical Center, Department of Radiology and Research Institute of Radiology, University of Ulsan College of Medicine, Seoul (Korea, Republic of); Park, Chang Min; Song, Yong Sub; Kim, Hyungjin; Goo, Jin Mo [Seoul National University College of Medicine, Department of Radiology, Seoul (Korea, Republic of); Seoul National University Medical Research Center, Institute of Radiation Medicine, Seoul (Korea, Republic of); Kim, Young Tae [Seoul National University College of Medicine, Department of Thoracic and Cardiovascular Surgery, Seoul (Korea, Republic of); Park, Young Sik [Seoul National University Hospital, Division of Pulmonary and Critical Care Medicine, Department of Internal Medicine, Seoul (Korea, Republic of); Seoul National University College of Medicine, Department of Internal Medicine, Seoul (Korea, Republic of)

2017-12-15

To retrospectively evaluate the feasibility of CT assessment-based direct surgical resection of part-solid nodules (PSNs) with solid components > 5 mm without preoperative percutaneous transthoracic needle biopsies (PTNBs). From January 2009-December 2014, 85 PSNs with solid components > 5 mm on CT were included. Preoperative PTNBs were performed for 41 PSNs (biopsy group) and CT assessment-based direct resections were performed for 44 PSNs (direct surgery group). Diagnostic accuracy and complication rates of the groups were compared. Pathological results of 83 PSNs excluding two indeterminate nodules included 76 adenocarcinomas (91.6%), two adenocarcinomas in situ (2.4%) and five benign lesions (6.0%). In the biopsy group, the overall sensitivity, specificity and accuracy for the diagnosis of adenocarcinoma were 78.9% (30/38), 100% (1/1) and 79.5% (31/39), respectively. Pneumothorax and haemoptysis occurred in 11 procedures (26.8%). In the direct surgery group, the respective values for the diagnosis of adenocarcinoma were 100% (38/38), 0% (0/6) and 86.4% (38/44), respectively. Seven pneumothoraces (15.9%); no haemoptysis occurred during localization procedures. There were no significant differences in diagnostic accuracy (P = 0.559) between the two groups. CT assessment-based direct resection can be reasonable for PSNs with solid part > 5 mm. (orig.)

CT assessment-based direct surgical resection of part-solid nodules with solid component larger than 5 mm without preoperative biopsy: experience at a single tertiary hospital

International Nuclear Information System (INIS)

Lee, Sang Min; Park, Chang Min; Song, Yong Sub; Kim, Hyungjin; Goo, Jin Mo; Kim, Young Tae; Park, Young Sik

2017-01-01

To retrospectively evaluate the feasibility of CT assessment-based direct surgical resection of part-solid nodules (PSNs) with solid components > 5 mm without preoperative percutaneous transthoracic needle biopsies (PTNBs). From January 2009-December 2014, 85 PSNs with solid components > 5 mm on CT were included. Preoperative PTNBs were performed for 41 PSNs (biopsy group) and CT assessment-based direct resections were performed for 44 PSNs (direct surgery group). Diagnostic accuracy and complication rates of the groups were compared. Pathological results of 83 PSNs excluding two indeterminate nodules included 76 adenocarcinomas (91.6%), two adenocarcinomas in situ (2.4%) and five benign lesions (6.0%). In the biopsy group, the overall sensitivity, specificity and accuracy for the diagnosis of adenocarcinoma were 78.9% (30/38), 100% (1/1) and 79.5% (31/39), respectively. Pneumothorax and haemoptysis occurred in 11 procedures (26.8%). In the direct surgery group, the respective values for the diagnosis of adenocarcinoma were 100% (38/38), 0% (0/6) and 86.4% (38/44), respectively. Seven pneumothoraces (15.9%); no haemoptysis occurred during localization procedures. There were no significant differences in diagnostic accuracy (P = 0.559) between the two groups. CT assessment-based direct resection can be reasonable for PSNs with solid part > 5 mm. (orig.)

Repeated Sprint Ability in Young Basketball Players: Multi-direction vs. One-Change of Direction (Part 1)

OpenAIRE

Padulo, Johnny; Bragazzi, Nicola L.; Nikolaidis, Pantelis T.; Dello Iacono, Antonio; Attene, Giuseppe; Pizzolato, Fabio; Dal Pupo, Juliano; Zagatto, Alessandro M.; Oggianu, Marcello; Migliaccio, Gian M.

2016-01-01

The aim of the present study was to examine the reliability of a novel multi-direction repeated sprint ability test (RSM; 10×(6×5-m)) compared with a repeated sprint ability test (RSA) with one change of direction (10×(2×15-m)), and the relationship of the RSM and RSA with Yo-Yo intermittent recovery test level 1 (Yo-Yo IR1) and jump performances [squat jump (SJ) and counter-movement-jump (CMJ)]. Thirty-six (male, n=14, female n=22) young basketball players (age 16.0±0.9 yrs) performed the RS...

Systematic literature reviews and meta-analyses: part 6 of a series on evaluation of scientific publications.

Science.gov (United States)

Ressing, Meike; Blettner, Maria; Klug, Stefanie J

2009-07-01

Because of the rising number of scientific publications, it is important to have a means of jointly summarizing and assessing different studies on a single topic. Systematic literature reviews, meta-analyses of published data, and meta-analyses of individual data (pooled reanalyses) are now being published with increasing frequency. We here describe the essential features of these methods and discuss their strengths and weaknesses. This article is based on a selective literature search. The different types of review and meta-analysis are described, the methods used in each are outlined so that they can be evaluated, and a checklist is given for the assessment of reviews and meta-analyses of scientific articles. Systematic literature reviews provide an overview of the state of research on a given topic and enable an assessment of the quality of individual studies. They also allow the results of different studies to be evaluated together when these are inconsistent. Meta-analyses additionally allow calculation of pooled estimates of an effect. The different types of review and meta-analysis are discussed with examples from the literature on one particular topic. Systematic literature reviews and meta-analyses enable the research findings and treatment effects obtained in different individual studies to be summed up and evaluated.

Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components

International Nuclear Information System (INIS)

Thivillon, L.; Bertrand, Ph.; Laget, B.; Smurov, I.

2009-01-01

Direct metal deposition (DMD) is an automated 3D deposition process arising from laser cladding technology with co-axial powder injection to refine or refurbish parts. Recently DMD has been extended to manufacture large-size near-net-shape components. When applied for manufacturing new parts (or their refinement), DMD can provide tailored thermal properties, high corrosion resistance, tailored tribology, multifunctional performance and cost savings due to smart material combinations. In repair (refurbishment) operations, DMD can be applied for parts with a wide variety of geometries and sizes. In contrast to the current tool repair techniques such as tungsten inert gas (TIG), metal inert gas (MIG) and plasma welding, laser cladding technology by DMD offers a well-controlled heat-treated zone due to the high energy density of the laser beam. In addition, this technology may be used for preventative maintenance and design changes/up-grading. One of the advantages of DMD is the possibility to build functionally graded coatings (from 1 mm thickness and higher) and 3D multi-material objects (for example, 100 mm-sized monolithic rectangular) in a single-step manufacturing cycle by using up to 4-channel powder feeder. Approved materials are: Fe (including stainless steel), Ni and Co alloys, (Cu,Ni 10%), WC compounds, TiC compounds. The developed coatings/parts are characterized by low porosity (<1%), fine microstructure, and their microhardness is close to the benchmark value of wrought alloys after thermal treatment (Co-based alloy Stellite, Inox 316L, stainless steel 17-4PH). The intended applications concern cooling elements with complex geometry, friction joints under high temperature and load, light-weight mechanical support structures, hermetic joints, tubes with complex geometry, and tailored inside and outside surface properties, etc

Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components

Science.gov (United States)

Thivillon, L.; Bertrand, Ph.; Laget, B.; Smurov, I.

2009-03-01

Direct metal deposition (DMD) is an automated 3D deposition process arising from laser cladding technology with co-axial powder injection to refine or refurbish parts. Recently DMD has been extended to manufacture large-size near-net-shape components. When applied for manufacturing new parts (or their refinement), DMD can provide tailored thermal properties, high corrosion resistance, tailored tribology, multifunctional performance and cost savings due to smart material combinations. In repair (refurbishment) operations, DMD can be applied for parts with a wide variety of geometries and sizes. In contrast to the current tool repair techniques such as tungsten inert gas (TIG), metal inert gas (MIG) and plasma welding, laser cladding technology by DMD offers a well-controlled heat-treated zone due to the high energy density of the laser beam. In addition, this technology may be used for preventative maintenance and design changes/up-grading. One of the advantages of DMD is the possibility to build functionally graded coatings (from 1 mm thickness and higher) and 3D multi-material objects (for example, 100 mm-sized monolithic rectangular) in a single-step manufacturing cycle by using up to 4-channel powder feeder. Approved materials are: Fe (including stainless steel), Ni and Co alloys, (Cu,Ni 10%), WC compounds, TiC compounds. The developed coatings/parts are characterized by low porosity (<1%), fine microstructure, and their microhardness is close to the benchmark value of wrought alloys after thermal treatment (Co-based alloy Stellite, Inox 316L, stainless steel 17-4PH). The intended applications concern cooling elements with complex geometry, friction joints under high temperature and load, light-weight mechanical support structures, hermetic joints, tubes with complex geometry, and tailored inside and outside surface properties, etc.

Potential of direct metal deposition technology for manufacturing thick functionally graded coatings and parts for reactors components

Energy Technology Data Exchange (ETDEWEB)

Thivillon, L.; Bertrand, Ph.; Laget, B. [Ecole Nationale d' Ingenieurs de Saint-Etienne (ENISE), DIPI Laboratory, 58 rue Jean Parot, 42023 Saint-Etienne cedex 2 (France); Smurov, I. [Ecole Nationale d' Ingenieurs de Saint-Etienne (ENISE), DIPI Laboratory, 58 rue Jean Parot, 42023 Saint-Etienne cedex 2 (France)], E-mail: smurov@enise.fr

2009-03-31

Direct metal deposition (DMD) is an automated 3D deposition process arising from laser cladding technology with co-axial powder injection to refine or refurbish parts. Recently DMD has been extended to manufacture large-size near-net-shape components. When applied for manufacturing new parts (or their refinement), DMD can provide tailored thermal properties, high corrosion resistance, tailored tribology, multifunctional performance and cost savings due to smart material combinations. In repair (refurbishment) operations, DMD can be applied for parts with a wide variety of geometries and sizes. In contrast to the current tool repair techniques such as tungsten inert gas (TIG), metal inert gas (MIG) and plasma welding, laser cladding technology by DMD offers a well-controlled heat-treated zone due to the high energy density of the laser beam. In addition, this technology may be used for preventative maintenance and design changes/up-grading. One of the advantages of DMD is the possibility to build functionally graded coatings (from 1 mm thickness and higher) and 3D multi-material objects (for example, 100 mm-sized monolithic rectangular) in a single-step manufacturing cycle by using up to 4-channel powder feeder. Approved materials are: Fe (including stainless steel), Ni and Co alloys, (Cu,Ni 10%), WC compounds, TiC compounds. The developed coatings/parts are characterized by low porosity (<1%), fine microstructure, and their microhardness is close to the benchmark value of wrought alloys after thermal treatment (Co-based alloy Stellite, Inox 316L, stainless steel 17-4PH). The intended applications concern cooling elements with complex geometry, friction joints under high temperature and load, light-weight mechanical support structures, hermetic joints, tubes with complex geometry, and tailored inside and outside surface properties, etc.

Integral analyses of fission product retention at mitigated thermally-induced SGTR using ARTIST experimental data

International Nuclear Information System (INIS)

Rýdl, Adolf; Lind, Terttaliisa; Birchley, Jonathan

2016-01-01

Highlights: • Source term analyses in a PWR of mitigated thermally-induced SGTR scenario performed. • Experimental ARTIST program results on aerosol scrubbing efficiency used in analyses. • Results demonstrate enhanced aerosol retention in a flooded steam generator. • High aerosol retention cannot be predicted by current theoretical scrubbing models. - Abstract: Integral source-term analyses are performed using MELCOR for a PWR Station Blackout (SBO) sequence leading to induced steam generator tube rupture (SGTR). In the absence of any mitigation measures, such a sequence can result in a containment bypass where the radioactive materials can be released directly to the environment. In some SGTR scenarios flooding of the faulted SG secondary side with water can mitigate the accident escalation and also the release of aerosol-borne and volatile radioactive materials. Data on the efficiency of aerosol scrubbing in an SG tube bundle were obtained in the international ARTIST project. In this paper ARTIST data are used directly with parametric MELCOR analyses of a mitigated SGTR sequence to provide more realistic estimates of the releases to environment in such a type of scenario or similar. Comparison is made with predictions using the default scrubbing model in MELCOR, as a representative of the aerosol scrubbing models in current integral codes. Specifically, simulations are performed for an unmitigated sequence and 2 cases where the SG secondary was refilled at different times after the tube rupture. The results, reflecting the experimental observations from ARTIST, demonstrate enhanced aerosol retention in the highly turbulent two-phase flow conditions caused by the complex geometry of the SG secondary side. This effect is not captured by any of the models currently available. The underlying physics remains only partly understood, indicating need for further studies to support a more mechanistic treatment of the retention process.

Uncertainty Analyses and Strategy

International Nuclear Information System (INIS)

Kevin Coppersmith

2001-01-01

The DOE identified a variety of uncertainties, arising from different sources, during its assessment of the performance of a potential geologic repository at the Yucca Mountain site. In general, the number and detail of process models developed for the Yucca Mountain site, and the complex coupling among those models, make the direct incorporation of all uncertainties difficult. The DOE has addressed these issues in a number of ways using an approach to uncertainties that is focused on producing a defensible evaluation of the performance of a potential repository. The treatment of uncertainties oriented toward defensible assessments has led to analyses and models with so-called ''conservative'' assumptions and parameter bounds, where conservative implies lower performance than might be demonstrated with a more realistic representation. The varying maturity of the analyses and models, and uneven level of data availability, result in total system level analyses with a mix of realistic and conservative estimates (for both probabilistic representations and single values). That is, some inputs have realistically represented uncertainties, and others are conservatively estimated or bounded. However, this approach is consistent with the ''reasonable assurance'' approach to compliance demonstration, which was called for in the U.S. Nuclear Regulatory Commission's (NRC) proposed 10 CFR Part 63 regulation (64 FR 8640 [DIRS 101680]). A risk analysis that includes conservatism in the inputs will result in conservative risk estimates. Therefore, the approach taken for the Total System Performance Assessment for the Site Recommendation (TSPA-SR) provides a reasonable representation of processes and conservatism for purposes of site recommendation. However, mixing unknown degrees of conservatism in models and parameter representations reduces the transparency of the analysis and makes the development of coherent and consistent probability statements about projected repository

Direct marketing a automobilový trh

OpenAIRE

Humaj, Matúš

2011-01-01

Bachelor's thesis focuses on direct marketing in close links with car market in Czech republic. Theoretical part points to direct marketing like event of marketing communication, it mentions about advantages and disadvantages, functions, tools and about adjustmen. In practical part I try to find the weak site of the market by the help of market's analysis and questionnaire and I propose the concept of direct marketing utilization.

KOH concentration effect on the cycle life of nickel-hydrogen cells. Part 4: Results of failure analyses

Science.gov (United States)

Lim, H. S.; Verzwyvelt, S. A.

1989-01-01

KOH concentration effects on cycle life of a Ni/H2 cell have been studied by carrying out a cycle life test of ten Ni/H2 boiler plate cells which contain electrolytes of various KOH concentrations. Failure analyses of these cells were carried out after completion of the life test which accumulated up to 40,000 cycles at an 80 percent depth of discharge over a period of 3.7 years. These failure analyses included studies on changes of electrical characteristics of test cells and component analyses after disassembly of the cell. The component analyses included visual inspections, dimensional changes, capacity measurements of nickel electrodes, scanning electron microscopy, BET surface area measurements, and chemical analyses. Results have indicated that failure mode and change in the nickel electrode varied as the concentration was varied, especially, when the concentration was changed from 31 percent or higher to 26 percent or lower.

The shaping of environmental concern in product chains: analysing Danish case studies on environmental aspects in product chain relations

DEFF Research Database (Denmark)

Forman, Marianne; Hansen, Anne Grethe; Jørgensen, Michael Søgaard

indirect demand for greening activities. The analysis shows the co-construction of environmental concerns and demands, companies’ environmental practices and technological developments, and their stabilisation in the supply chain. The case studies also point to how the greening of frontrunners might make...... the systems of production, consumption, knowledge and regulation are discussed. The role of boundary objects is discussed with eco-labelling as case. The role of and the impact on the product chain relations are analysed as part of these mechanisms. From the case studies, green innovations in the product...... chain, which the case company represents, are identified. Direct customer and regulatory demands, as well as indirect societal and regulatory demands are mapped, and their role for product chain greening analysed. The case studies point to the importance of customer demand, regulation and potentially...

Tracking the direct impact of rainfall on groundwater at Mt. Fuji by multiple analyses including microbial DNA

Science.gov (United States)

Sugiyama, Ayumi; Masuda, Suguru; Nagaosa, Kazuyo; Tsujimura, Maki; Kato, Kenji

2018-02-01

A total of 2 to 3 million tons of spring water flushes out from the foot of Mt. Fuji, the largest volcanic mountain in Japan. Based on the concept of piston flow transport, residence time of stored groundwater at Mt. Fuji was estimated at ˜ 15-30 years by the 36Cl / Cl ratio (Tosaki et al., 2011). This range, however, represents the average residence time of groundwater that was mixed before it flushed out. To elucidate the route of groundwater in a given system, we determined signatures of direct impacts of rainfall on groundwater, using microbial, stable isotopic (δ18O), and chemical analyses (concentration of silica). Chemical analysis of the groundwater gave an average value of the water, which was already mixed with waters from various sources and routes in the subsurface environment. The microbial analysis suggested locations of water origin and paths. In situ observation during four rainfall events revealed that the stable oxygen isotopic signature obtained from spring water (at 726 m a.s.l., site SP-0 m) and shallow groundwater (at 150 m a.s.l., site GW-42 m), where the average recharge height from rainfall was 1700-1800 m, became greater than values observed prior to a torrential rain producing more than 300 mm of precipitation. The concentration of silica decreased after this event. In addition, the abundance of Bacteria in spring water increased, suggesting the influence of heavy rain. Such changes did not appear when rainfall was less than 100 mm per event. The above findings indicate a rapid flow of rain through the shallow part of the aquifer, which appeared within a few weeks of torrential rain extracting abundant microbes from soil in the studied geologic setting. Interestingly, we found that after the torrential rain, the abundance of Archaea increased in the deep groundwater at site GW-550 m, ˜ 12 km downstream of SP-0 m. However, chemical parameters did not show any change after the event. This suggests that strengthened piston flow caused by

Research Directions in Anthropological Pragmatics

Directory of Open Access Journals (Sweden)

Piotr P. Chruszczewski

2011-08-01

Full Text Available Anthropological linguistics, and by default also anthropological pragmatics, grew as sub-disciplines of both anthropology and linguistics. “The intellectual basis for anthropological linguistics in the United States derives from Boas ([1911] 1966, whose interests and concerns led to the anthropological view of language, which is that language is an integral part of culture (…” (Klein 2006: 296. Pragmatics enters the scene, telling the researcher how to analyse the aforementioned phenomena. Therefore, anthropological pragmatics would be responsible for equipping the researcher with tools, for it is language and language-oriented mechanisms of communication, the study of which provides a much clearer insight into cultural phenomena which often direct the use of language representing culture from both the synchronic and the diachronic point of view. “[O]ne approaches language from an anthropological view, which includes the uses of language and the uses of silence, as well as the cultural problems involved in silence and speech” (ibid..

Trend analysis of wave storminess: wave direction and its impact on harbour agitation

Directory of Open Access Journals (Sweden)

M. Casas-Prat

2010-11-01

Full Text Available In the context of wave climate variability, long-term alterations in the wave storminess pattern of the Catalan coast (northwestern Mediterranean Sea are analysed in terms of wave energy content and wave direction, on the basis of wave hindcast data (from 44-year time series. In general, no significant temporal trends are found for annual mean and maximum energy. However, the same analysis carried out separately for different wave directions reveals a remarkable increase in the storm energy of events from the south, which is partly due to a rise in the annual percentage of such storms. A case study of Tarragona Port (on the southern Catalan coast highlights the importance of including changes in wave direction in the study of potential impacts of climate change. In particular, an increase in the frequency of storms from the south leads to greater agitation inside the Port.

The Direct Payments in the European Model of Agriculture

Directory of Open Access Journals (Sweden)

Věra Bečvářová

2008-01-01

Full Text Available The paper deals with the evaluation of economic contexts of the direct payments, as a targeted lump-sum financial transfer to the recipient’s income, employment in agricultural policy. Based upon the basic types of subsidies and their economic costs evaluation from the point of view of their deforming effects as well as transaction costs the direct payments are analysed generally as a type of support without a distorting effect on the gathering and transmission of market signals. The direct payments imply that the predominant flow from public funding to agriculture is paid independently from the volume of the present production (its amount and structure and make possible to choose the best structure of farm activities. However, their additional expenses are evaluated as a relatively very high. The transaction costs are high because the realisation of their objective (increase of the recipients’ income requires detailed personal information. Budgetary costs may also become extraordinarily high in the long term. On the basis at above the positive as well as negative components of their capacity for producers’ decision-making processes and their impact on the competitiveness in the framework of the modern agriculture are evaluated. In the following part of the paper the relationships effects of decoupled payments and agrarian markets are evaluated. Results of analyses indicate, the decoupled payments are not fully production neutral. Four topics of influence through which decoupled payments could affect production decisions are bringing to the attention as follows: wealth and investment effects (direct wealth effect, a wealth-facilitated increased investment effect, and a secondary wealth effect resulting from the increase in investment, sector consolidation effects, payment basis effects, and producer risk and expectations effects.

Systems modeling for a laser-driven IFE power plant using direct conversion

International Nuclear Information System (INIS)

Meier, W R

2008-01-01

A variety of systems analyses have been conducted for laser driver IFE power plants being developed as part of the High Average Power Laser (HAPL) program. A key factor determining the economics attractiveness of the power plant is the net power conversion efficiency which increases with increasing laser efficiency, target gain and fusion-to-electric power conversion efficiency. A possible approach to increasing the power conversion efficiency is direct conversion of ionized target emissions to electricity. This study examines the potential benefits of increased efficiency when the expanding plasma is inductively coupled to an external circuit allowing some of the ion energy to be directly converted to electricity. For base case direct-drive targets with approximately 24% of the target yield in ions, the benefits are modest, especially for chamber designs that operate at high temperature and thus already have relatively high thermal conversion efficiencies. The reduction in the projected cost of electricity is ∼5-10%

Utilization management in radiology, part 2: perspectives and future directions.

Science.gov (United States)

Duszak, Richard; Berlin, Jonathan W

2012-10-01

Increased utilization of medical imaging in the early part of the last decade has resulted in numerous efforts to reduce associated spending. Recent initiatives have focused on managing utilization with radiology benefits managers and real-time order entry decision support systems. Although these approaches might seem mutually exclusive and their application to radiology appears unique, the historical convergence and broad acceptance of both programs within the pharmacy sector may offer parallels for their potential future in medical imaging. In this second installment of a two-part series, anticipated trends in radiology utilization management are reviewed. Perspectives on current and future potential roles of radiologists in such initiatives are discussed, particularly in light of emerging physician payment models. Copyright © 2012 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Effects of holding pressure and process temperatures on the mechanical properties of moulded metallic parts

DEFF Research Database (Denmark)

Islam, Aminul; Hansen, Hans Nørgaard; Esteves, N.M.

2013-01-01

Metal injection moulding is gaining more and more importance over the time and needs more research to be done to understand the sensitivity of process to different process parameters. The current paper makes an attempt to better understand the effects of holding pressure and process temperatures...... on the moulded metallic parts. Stainless steel 316L is used in the investigation to produce the specimen by metal injection moulding (MIM) and multiple analyses were carried out on samples produced with different combinations of holding pressure, mould temperature and melt temperature. Finally, the parts were...... characterized to investigate mechanical properties like density, ultimate tensile strength, shrinkage etc. The results are discussed in the paper. The main conclusion from this study is unlike plastic moulding, the tensile properties of MIM parts doesn’t vary based on the flow direction of the melt, and tensile...

3-dimensional magnetotelluric inversion including topography using deformed hexahedral edge finite elements and direct solvers parallelized on symmetric multiprocessor computers - Part II: direct data-space inverse solution

Science.gov (United States)

Kordy, M.; Wannamaker, P.; Maris, V.; Cherkaev, E.; Hill, G.

2016-01-01

Following the creation described in Part I of a deformable edge finite-element simulator for 3-D magnetotelluric (MT) responses using direct solvers, in Part II we develop an algorithm named HexMT for 3-D regularized inversion of MT data including topography. Direct solvers parallelized on large-RAM, symmetric multiprocessor (SMP) workstations are used also for the Gauss-Newton model update. By exploiting the data-space approach, the computational cost of the model update becomes much less in both time and computer memory than the cost of the forward simulation. In order to regularize using the second norm of the gradient, we factor the matrix related to the regularization term and apply its inverse to the Jacobian, which is done using the MKL PARDISO library. For dense matrix multiplication and factorization related to the model update, we use the PLASMA library which shows very good scalability across processor cores. A synthetic test inversion using a simple hill model shows that including topography can be important; in this case depression of the electric field by the hill can cause false conductors at depth or mask the presence of resistive structure. With a simple model of two buried bricks, a uniform spatial weighting for the norm of model smoothing recovered more accurate locations for the tomographic images compared to weightings which were a function of parameter Jacobians. We implement joint inversion for static distortion matrices tested using the Dublin secret model 2, for which we are able to reduce nRMS to ˜1.1 while avoiding oscillatory convergence. Finally we test the code on field data by inverting full impedance and tipper MT responses collected around Mount St Helens in the Cascade volcanic chain. Among several prominent structures, the north-south trending, eruption-controlling shear zone is clearly imaged in the inversion.

A new approach to analyse longitudinal epidemiological data with an excess of zeros.

Science.gov (United States)

Spriensma, Alette S; Hajos, Tibor R S; de Boer, Michiel R; Heymans, Martijn W; Twisk, Jos W R

2013-02-20

Within longitudinal epidemiological research, 'count' outcome variables with an excess of zeros frequently occur. Although these outcomes are frequently analysed with a linear mixed model, or a Poisson mixed model, a two-part mixed model would be better in analysing outcome variables with an excess of zeros. Therefore, objective of this paper was to introduce the relatively 'new' method of two-part joint regression modelling in longitudinal data analysis for outcome variables with an excess of zeros, and to compare the performance of this method to current approaches. Within an observational longitudinal dataset, we compared three techniques; two 'standard' approaches (a linear mixed model, and a Poisson mixed model), and a two-part joint mixed model (a binomial/Poisson mixed distribution model), including random intercepts and random slopes. Model fit indicators, and differences between predicted and observed values were used for comparisons. The analyses were performed with STATA using the GLLAMM procedure. Regarding the random intercept models, the two-part joint mixed model (binomial/Poisson) performed best. Adding random slopes for time to the models changed the sign of the regression coefficient for both the Poisson mixed model and the two-part joint mixed model (binomial/Poisson) and resulted into a much better fit. This paper showed that a two-part joint mixed model is a more appropriate method to analyse longitudinal data with an excess of zeros compared to a linear mixed model and a Poisson mixed model. However, in a model with random slopes for time a Poisson mixed model also performed remarkably well.

Analysing harmonic motions with an iPhone’s magnetometer

Science.gov (United States)

Yavuz, Ahmet; Kağan Temiz, Burak

2016-05-01

In this paper, we propose an experiment for analysing harmonic motion using an iPhone’s (or iPad’s) magnetometer. This experiment consists of the detection of magnetic field variations obtained from an iPhone’s magnetometer sensor. A graph of harmonic motion is directly displayed on the iPhone’s screen using the Sensor Kinetics application. Data from this application was analysed with Eureqa software to establish the equation of the harmonic motion. Analyses show that the use of an iPhone’s magnetometer to analyse harmonic motion is a practical and effective method for small oscillations and frequencies less than 15-20 Hz.

Structural analyses of ITER toroidal field coils under fault conditions

International Nuclear Information System (INIS)

Jong, C.T.J.

1992-04-01

ITER (International Thermonuclear Experimental Reactor) is intended to be an experimental thermonuclear tokamak reactor testing the basic physics performance and technologies essential to future fusion reactors. The magnet system of ITER consists essentially of 4 sub-systems, i.e. toroidal field coils (TFCs), poloidal field coils (PFCs), power supplies, and cryogenic supplies. These subsystems do not contain significant radioactivity inventories, but the large energy inventory is a potential accident initiator. The aim of the structural analyses is to prevent accidents from propagating into vacuum vessel, tritium system and cooling system, which all contain significant amounts of radioactivity. As part of design process 3 conditions are defined for PF and TF coils, at which mechanical behaviour has to be analyzed in some detail, viz: normal operating conditions, upset conditions and fault conditions. This paper describes the work carried out by ECN to create a detailed finite element model of 16 TFCs as well as results of some fault condition analyses made with the model. Due to fault conditions, either electrical or mechanical, magnetic loading of TFCs becomes abnormal and further mechanical failure of parts of the overall structure might occur (e.g. failure of coil, gravitational supports, intercoil structure). The analyses performed consist of linear elastic stress analyses and electro-magneto-structural analyses (coupled field analyses). 8 refs.; 5 figs.; 5 tabs

Analysing global value chains using input-output economics : proceed with care

NARCIS (Netherlands)

Nomaler, Z.O.; Verspagen, B.

2014-01-01

Input-output economics has become a popular tool to analyse the international fragmentation of value chains, especially now that several multi-regional tables that cover large parts of the global economy have become available. It has been argued that these tables, when analysed with the help of the

Analysing global value chains using input-output economics: Proceed with care

NARCIS (Netherlands)

Nomaler, Ö.; Verspagen, B.

2014-01-01

Input-output economics has become a popular tool to analyse the international fragmentation of value chains, especially now that several multi-regional tables that cover large parts of the global economy have become available. It has been argued that these tables, when analysed with the help of the

Site-Specific Analyses for Demonstrating Compliance with 10 CFR 61 Performance Objectives - 12179

Energy Technology Data Exchange (ETDEWEB)

Grossman, C.J.; Esh, D.W.; Yadav, P.; Carrera, A.G. [U.S. Nuclear Regulatory Commission, 11545 Rockville Pike, Rockville, MD 20852 (United States)

2012-07-01

The U.S. Nuclear Regulatory Commission (NRC) is proposing to amend its regulations at 10 CFR Part 61 to require low-level radioactive waste disposal facilities to conduct site-specific analyses to demonstrate compliance with the performance objectives in Subpart C. The amendments would require licensees to conduct site-specific analyses for protection of the public and inadvertent intruders as well as analyses for long-lived waste. The amendments would ensure protection of public health and safety, while providing flexibility to demonstrate compliance with the performance objectives, for current and potential future waste streams. NRC staff intends to submit proposed rule language and associated regulatory basis to the Commission for its approval in early 2012. The NRC staff also intends to develop associated guidance to accompany any proposed amendments. The guidance is intended to supplement existing low-level radioactive waste guidance on issues pertinent to conducting site-specific analyses to demonstrate compliance with the performance objectives. The guidance will facilitate implementation of the proposed amendments by licensees and assist competent regulatory authorities in reviewing the site-specific analyses. Specifically, the guidance provides staff recommendations on general considerations for the site-specific analyses, modeling issues for assessments to demonstrate compliance with the performance objectives including the performance assessment, intruder assessment, stability assessment, and analyses for long-lived waste. This paper describes the technical basis for changes to the rule language and the proposed guidance associated with implementation of the rule language. The NRC staff, per Commission direction, intends to propose amendments to 10 CFR Part 61 to require licensees to conduct site-specific analyses to demonstrate compliance with performance objectives for the protection of public health and the environment. The amendments would require a

77 FR 19071 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2012-03-30

... Airworthiness Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... directive (AD) for certain Airbus Model A330-200, A330-300, A340-500, and A340-600 series airplanes. This AD...: During structural part assembly in Airbus production line, some nuts Part Number (P/N) ASNA2531-4 were...

40 CFR 73.72 - Direct sales.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 16 2010-07-01 2010-07-01 false Direct sales. 73.72 Section 73.72... ALLOWANCE SYSTEM Auctions, Direct Sales, and Independent Power Producers Written Guarantee § 73.72 Direct sales. Allowances that were formerly part of the direct sale program, which has been terminated under...

Direct Conversion of Energy.

Science.gov (United States)

Corliss, William R.

This publication is one of a series of information booklets for the general public published by the United States Atomic Energy Commission. Direct energy conversion involves energy transformation without moving parts. The concepts of direct and dynamic energy conversion plus the laws governing energy conversion are investigated. Among the topics…

Exchange effects in direct reactions

International Nuclear Information System (INIS)

LeMere, M.; Kanellopoulos, E.J.; Suenkel, W.; Tang, Y.C.

1979-01-01

The effect of antisymmetrization in direct reactions is examined by studying the properties of the coupling-normalization kernel function occurring in a resonating-group formulation. From this study, one obtains useful information concerning the general behavior of direct-reactiion processes and some justification for the use of three-body models in phenomenological analyses

Intraoperative direct electrical stimulations of central nervous system during surgery of gliomas near eloquent areas

Directory of Open Access Journals (Sweden)

WANG Wei-min

2012-12-01

Full Text Available Objective To report our experiences of direct cortical stimulation in surgery of gliomas located in eloquent areas. Methods Clinical data of 157 patients with gliomas underwent awake craniotomy with the direct electrical stimulation for functional mapping of the eloquent areas were analysed retrospectively. Results Negative cortical stimulation was found in 4 patients, and positive cortical stimulation was achieved in 153 patients (97.45% . Four hundred and ninty -six cortical sites in 139 patients were detected for motor response by direct electrical stimulation, 70 sites in 21 patients for sensory, 112 sites in 91 patients for language (such as counting and naming. The positive areas of counting disturbance were mainly seen at the lower part of left precentral gyri operculum of left inferior frontal gyri, triangular part of left inferior frontal gyri, posterior part of left middle frontal gyri, and posterior part of left superior frontal gyri. Postoperative MRI showed 92 patients (58.60% achieved total resection, 55 cases (35.03% subtotal and 10 cases (6.37% partial. One hundred and ten patients (70.06% were diagnosed as having low grade glimas, including 71 cases of astrocytoma, 26 cases of oligodendroglioma, and 13 cases of mixed astro ? oligodendroglioma, 47 patients (29.94% were high grade gliomas, including 19 cases of glioblastoma, 15 cases of anaplastic astrocytoma, and 13 cases of anaplastic oligodendroglioma. After operation 53 patients (33.76% occurred transient postoperative paralysis, 39 patients (24.84% transient language disturbance and 4 patients (2.55% permanent neurological deficits. Conclusion Intraoperative direct electrical stimulation is a reliable, precise and safety method for functional mapping of the eloquent areas. This technique allows us to achieve 'maximal safety resection' in glioma surgery．

Analysing and Developing TQM Strategies - An Important Part of Company Innovation

DEFF Research Database (Denmark)

Hartz, Ove

2000-01-01

activities and employee behaviour in industrial company cultures. The paper outlines and discusses some results of total quality management research projects and case study research in industrial companies carried out at the Technical University of Denmark. The background of the viewpoints and experience......This paper discusses strategies for development of total quality management as an integrated part of company innovation taking the size and other particular characteristics of the specific company into consideration, with the focus on issues related to the development of appropriate total quality...... outlined is based on a combination of theoretical work, case study research and involvement in the practical development of total quality management in industrial companies of very different sizes....

Computer Modeling of Direct Metal Laser Sintering

Science.gov (United States)

Cross, Matthew

2014-01-01

A computational approach to modeling direct metal laser sintering (DMLS) additive manufacturing process is presented. The primary application of the model is for determining the temperature history of parts fabricated using DMLS to evaluate residual stresses found in finished pieces and to assess manufacturing process strategies to reduce part slumping. The model utilizes MSC SINDA as a heat transfer solver with imbedded FORTRAN computer code to direct laser motion, apply laser heating as a boundary condition, and simulate the addition of metal powder layers during part fabrication. Model results are compared to available data collected during in situ DMLS part manufacture.

Optical design and performance of a dual-grating, direct-reading spectrograph for spectrochemical analyses

International Nuclear Information System (INIS)

Steinhaus, D.W.; Kline, J.V.; Bieniewski, T.M.; Dow, G.S.; Apel, C.T.

1979-01-01

An all-mirror optical system is used to direct the light from a variety of spectroscopic sources to two 2-m spectrographs that are placed on either side of a sturdy vertical mounting plate. The gratings were chosen so that the first spectrograph covers the ultraviolet spectral region, and the second spectrograph covers the ultraviolet, visible, and near-infrared regions. With the over 2.5 m of focal curves, each ultraviolet line is available at more than one place. Thus, problems with close lines can be overcome. The signals from a possible maximum of 256 photoelectric detectors go to a small computer for reading and calculation of the element abundances. To our knowledge, no other direct-reading spectrograph has more than about 100 fixed detectors. With an inductively-coupled-plasma source, our calibration curves, and detection limits, are similar to those of other workers using a direct-reading spectrograph

Optical Design And Performance Of A Dual-Grating, Direct-Reading Spectrograph For Spectrochemical Analyses

Science.gov (United States)

Steinhaus, David W.; Kline, John V.; Bieniewski, Thomas M.; Dow, Grove S.; Apel, Charles T.

1980-11-01

An all-mirror optical system is used to direct the light from a variety of spectroscopic sources to two 2-m spectrographs that are placed on either side of a sturdy vertical mounting plate. The gratings were chosen so that the first spectrograph covers the ultraviolet spectral region, and the second spectrograph covers the ultraviolet, visible, and near-infrared regions. With the over 2.5 m of focal curves, each ultraviolet line is available at more than one place. Thus, problems with close lines can be overcome. The signals from a possible maximum of 256 photoelectric detectors go to a small computer for reading and calculation of the element abundances. To our knowledge, no other direct-reading spectrograph has more than about 100 fixed detectors. With an inductively-coupled-plasma source, our calibration curves, and detection limits, are similar to those of other workers using a direct-reading spectrograph.

High precision studies of directional correlations

International Nuclear Information System (INIS)

El-khosht, M.

1980-01-01

Two applications of the method of directional correlations are described. The first part deals with gamma-gamma directional correlations measurements. A total of 27 cascades have been studied in 97 Tc, 206 Pb and 206 Bi. Information is obtained on the angular momenta of levels, multipolarities of electromagnetic transitions and further, reduced transition probabilities. The later part of this thesis describes a determination of anisotropic directional correlation between gamma-rays and LX-rays in 160 Dy. To the authors' knowledge this is the first observation of an anisotropic correlation between gamma rays and X-rays following internal conversion. (Auth.)

NASA directives: Master list and index

Science.gov (United States)

1994-01-01

This Handbook sets forth in two parts the following information for the guidance of users of the NASA Management Directives System. Chapter 1 contains introductory information material on how to use this Handbook. Chapter 2 is a complete master list of Agency-wide management directives, describing each directive by type, number, effective date, expiration date, title, and organization code of the office responsible for the directive. Chapter 3 includes a consolidated numerical list of all delegations of authority and a breakdown of such delegation by the office of Installation to which special authority is assigned. Chapter 4 sets forth a consolidated list of all NASA Handbooks (NHB's) and important footnotes covering the control and ordering of such documents. Chapter 5 is a consolidated list of NASA management directives applicable to the Jet Propulsion Laboratory. Chapter 6 is a consolidated list of NASA management directives published in the code of Federal Regulations. Complementary manuals to the NASA Management Directives System are described in Chapter 7. Part B contains an in-depth alphabetical index to all NASA management directives other than Handbooks.

A channel profile analyser

International Nuclear Information System (INIS)

Gobbur, S.G.

1983-01-01

It is well understood that due to the wide band noise present in a nuclear analog-to-digital converter, events at the boundaries of adjacent channels are shared. It is a difficult and laborious process to exactly find out the shape of the channels at the boundaries. A simple scheme has been developed for the direct display of channel shape of any type of ADC on a cathode ray oscilliscope display. This has been accomplished by sequentially incrementing the reference voltage of a precision pulse generator by a fraction of a channel and storing ADC data in alternative memory locations of a multichannel pulse height analyser. Alternative channels are needed due to the sharing at the boundaries of channels. In the flat region of the profile alternate memory locations are channels with zero counts and channels with the full scale counts. At the boundaries all memory locations will have counts. The shape of this is a direct display of the channel boundaries. (orig.)

The MAFLA (Mississippi, Alabama, Florida) Study, Grain Size Analyses

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The MAFLA (Mississippi, Alabama, Florida) Study was funded by NOAA as part of the Outer Continental Shelf Program. Dr. L.J. Doyle produced grain size analyses in the...

Analyses of MHD instabilities

International Nuclear Information System (INIS)

Takeda, Tatsuoki

1985-01-01

In this article analyses of the MHD stabilities which govern the global behavior of a fusion plasma are described from the viewpoint of the numerical computation. First, we describe the high accuracy calculation of the MHD equilibrium and then the analysis of the linear MHD instability. The former is the basis of the stability analysis and the latter is closely related to the limiting beta value which is a very important theoretical issue of the tokamak research. To attain a stable tokamak plasma with good confinement property it is necessary to control or suppress disruptive instabilities. We, next, describe the nonlinear MHD instabilities which relate with the disruption phenomena. Lastly, we describe vectorization of the MHD codes. The above MHD codes for fusion plasma analyses are relatively simple though very time-consuming and parts of the codes which need a lot of CPU time concentrate on a small portion of the codes, moreover, the codes are usually used by the developers of the codes themselves, which make it comparatively easy to attain a high performance ratio on the vector processor. (author)

MERCURY IN ATMOSPHERE OVER RURAL, URBAN AND INDUSTRIAL PARTS OF ZAGREB CITY

Directory of Open Access Journals (Sweden)

Ladislav A. Palinkaš

1990-12-01

Full Text Available In recent years Zagreb city encounters severe pollution problems in aquatic, terrrestrial and atmospheric environment. A random or permanent monitoring of some inorganic gaseous pollutants in atmosphere has already been organized and published alsewhere. By means of a sophisticated mercury vapor analyser with a Zeeman effect background corrector, however, continuous registration along two traverses (monitoring routes over rural, urban and industrial parts of Zagreb has been elaborated for the first lime. Data show strong anthropogenic influence in the Žitnjak industrial area. The anomaly high 105 ngm Hg, on the 22 October moved slightly to downtown by change of wind direction on the 31 October. Intensity raised as much as 155 ngm Hg, 13 times augmented in comparison to a background value on the Medvednica mountain. Explanation should be sought in denser public traffic, change of wind direction and lowering of atmospheric pressure.

Direct filtration of Biesbosch water and Algae and water treatment in the Netherlands : 3rd Direct Filtration Seminar

NARCIS (Netherlands)

Petrusevski, B.; Vlaski, A.; Van Breemen, A.N.; Alaerts, G.J.

1993-01-01

This presentation summarises basic information on direct filtration, and demonstrates the main research findings, related to the performance of simple in-line direct filtration. The results reported are part of a comprehensive ongoing research programm "Direct filtration of Biesbosch water"

Directed network modules

International Nuclear Information System (INIS)

Palla, Gergely; Farkas, Illes J; Pollner, Peter; Derenyi, Imre; Vicsek, Tamas

2007-01-01

A search technique locating network modules, i.e. internally densely connected groups of nodes in directed networks is introduced by extending the clique percolation method originally proposed for undirected networks. After giving a suitable definition for directed modules we investigate their percolation transition in the Erdos-Renyi graph both analytically and numerically. We also analyse four real-world directed networks, including Google's own web-pages, an email network, a word association graph and the transcriptional regulatory network of the yeast Saccharomyces cerevisiae. The obtained directed modules are validated by additional information available for the nodes. We find that directed modules of real-world graphs inherently overlap and the investigated networks can be classified into two major groups in terms of the overlaps between the modules. Accordingly, in the word-association network and Google's web-pages, overlaps are likely to contain in-hubs, whereas the modules in the email and transcriptional regulatory network tend to overlap via out-hubs

Thermodynamic analyses of hydrogen production from sub-quality natural gas. Part II: Steam reforming and autothermal steam reforming

Science.gov (United States)

Huang, Cunping; T-Raissi, Ali

Part I of this paper analyzed sub-quality natural gas (SQNG) pyrolysis and autothermal pyrolysis. Production of hydrogen via direct thermolysis of SQNGs produces only 2 mol of hydrogen and 1 mol of carbon per mole of methane (CH 4). Steam reforming of SQNG (SRSQNG) could become a more effective approach because the processes produce two more moles of hydrogen via water splitting. A Gibbs reactor unit operation in the AspenPlus™ chemical process simulator was employed to accomplish equilibrium calculations for the SQNG + H 2O and SQNG + H 2O + O 2 systems. The results indicate that water and oxygen inlet flow rates do not significantly affect the decomposition of hydrogen sulfide (H 2S) at temperatures lower than 1000 °C. The major co-product of the processes is carbonyl sulfide (COS) while sulfur dimer (S 2) and carbon disulfide (CS 2) are minor by-products within this temperature range. At higher temperatures (>1300 °C), CS 2 and S 2 become major co-products. No sulfur dioxide (SO 2) or sulfur trioxide (SO 3) is formed during either SRSQNG or autothermal SRSQNG processes, indicating that no environmentally harmful acidic gases are generated.

The spatial patterns of directional phenotypic selection

KAUST Repository

Siepielski, Adam M.; Gotanda, Kiyoko M.; Morrissey, Michael B.; Diamond, Sarah E.; DiBattista, Joseph; Carlson, Stephanie Marie

2013-01-01

the spatial patterns of selection, namely the extent of variation among populations in the strength and direction of selection. Here, we analyse a data set of spatially replicated studies of directional phenotypic selection from natural populations. The data

Scientific Drilling of Impact Craters - Well Logging and Core Analyses Using Magnetic Methods (Invited)

Science.gov (United States)

Fucugauchi, J. U.; Perez-Cruz, L. L.; Velasco-Villarreal, M.

2013-12-01

Drilling projects of impact structures provide data on the structure and stratigraphy of target, impact and post-impact lithologies, providing insight on the impact dynamics and cratering. Studies have successfully included magnetic well logging and analyses in core and cuttings, directed to characterize the subsurface stratigraphy and structure at depth. There are 170-180 impact craters documented in the terrestrial record, which is a small proportion compared to expectations derived from what is observed on the Moon, Mars and other bodies of the solar system. Knowledge of the internal 3-D deep structure of craters, critical for understanding impacts and crater formation, can best be studied by geophysics and drilling. On Earth, few craters have yet been investigated by drilling. Craters have been drilled as part of industry surveys and/or academic projects, including notably Chicxulub, Sudbury, Ries, Vredefort, Manson and many other craters. As part of the Continental ICDP program, drilling projects have been conducted on the Chicxulub, Bosumtwi, Chesapeake, Ries and El gygytgyn craters. Inclusion of continuous core recovery expanded the range of paleomagnetic and rock magnetic applications, with direct core laboratory measurements, which are part of the tools available in the ocean and continental drilling programs. Drilling studies are here briefly reviewed, with emphasis on the Chicxulub crater formed by an asteroid impact 66 Ma ago at the Cretaceous/Paleogene boundary. Chicxulub crater has no surface expression, covered by a kilometer of Cenozoic sediments, thus making drilling an essential tool. As part of our studies we have drilled eleven wells with continuous core recovery. Magnetic susceptibility logging, magnetostratigraphic, rock magnetic and fabric studies have been carried out and results used for lateral correlation, dating, formation evaluation, azimuthal core orientation and physical property contrasts. Contributions of magnetic studies on impact

Part time employment and happiness: A cross-country analysis

OpenAIRE

Jenny Willson; Andy Dickerson

2010-01-01

The relationship between part time employment and job satisfaction is analysed for mothers in Germany, Denmark, the Netherlands, Finland, France, Spain and the UK. The impact of working part time on subjective life satisfaction and mental well-being is additionally analysed for British mothers. Cultural traditions concerning women´s role in society, and institutional differences between the countries are exploited. Results indicate that poor quality jobs can diminish any positive well-being r...

Analysis of vertical wind direction and speed gradients for data from the met. mast at Høvsøre

DEFF Research Database (Denmark)

Cariou, Nicolas; Wagner, Rozenn; Gottschall, Julia

The task of this project has been to study the vertical gradient of the wind direction from experimental data obtained with different measurement instruments at the Høvsøre test site, located at the west coast of Denmark. The major part of the study was based on data measured by wind vanes mounted...... at a meteorological (met.) mast. These measurements enabled us to make an analysis of the variation of the direction with altitude, i.e. the wind direction shear. For this purpose, four years of wind direction measurements at two heights (60 m and 100 m) were analysed with special respect to the diurnal and seasonal...... variations of the direction gradient. The location of the test site close to the sea allowed for an investigation of specific trends for offshore and onshore winds, dependent on the considered wind direction sector. Furthermore, a comparison to lidar measurements showed the existence of an offset between...

A new approach to analyse longitudinal epidemiological data with an excess of zeros

NARCIS (Netherlands)

Spriensma, Alette S.; Hajos, Tibor R. S.; de Boer, Michiel R.; Heymans, Martijn W.; Twisk, Jos W. R.

2013-01-01

Background: Within longitudinal epidemiological research, 'count' outcome variables with an excess of zeros frequently occur. Although these outcomes are frequently analysed with a linear mixed model, or a Poisson mixed model, a two-part mixed model would be better in analysing outcome variables

[The maintenance of automatic analysers and associated documentation].

Science.gov (United States)

Adjidé, V; Fournier, P; Vassault, A

2010-12-01

The maintenance of automatic analysers and associated documentation taking part in the requirements of the ISO 15189 Standard and the French regulation as well have to be defined in the laboratory policy. The management of the periodic maintenance and documentation shall be implemented and fulfilled. The organisation of corrective maintenance has to be managed to avoid interruption of the task of the laboratory. The different recommendations concern the identification of materials including automatic analysers, the environmental conditions to take into account, the documentation provided by the manufacturer and documents prepared by the laboratory including procedures for maintenance.

24 CFR 180.215 - Ex parte communications.

Science.gov (United States)

2010-04-01

... AND BUSINESS OPPORTUNITY CONSOLIDATED HUD HEARING PROCEDURES FOR CIVIL RIGHTS MATTERS Administrative Law Judge § 180.215 Ex parte communications. (a) An ex parte communication is any direct or indirect...

Eléments pour une analyse morphologique de la céramique

Directory of Open Access Journals (Sweden)

1977-01-01

Full Text Available A partir de l'étude morphologique de récipients Chancay (Pérou, il s'agit de donner les éléments principaux d'une méthode d'analyse formelle de la céramique. La démarche suivie est guidée par le choix méthodologique de conserver les parties traditionnelles d'un récipient comme catégories d'analyse pertinentes. Le récipient est ainsi divisé en composants, eux-mêmes subdivisés en parties selon le degré de finesse d'analyse requis. Sont proposées des définitions de chaque composant. Mais il s'agit moins de donner une définition trop stricte des composants que d'établir un système cohérent qui permette une analyse rigoureuse des récipients. Chaque section d'un récipient est analysée selon le déroulement de son profil, de point pertinent en point pertinent en terme de direction et de forme. Des mesures et rapports, de mesures faisant intervenir le volume entier du récipient viennent préciser ce profil. Certaines formes particulières à la céramique américaine ont permis de soulever le problème de l'analyse des récipients qui ne sont pas des solides de révolution. A partir del estudio morfológico de recipientes Chancay (Perú, se trata de dar los elementos principales de un método de análisis formal de la cerámica. El procedimiento empleado ha sido guiado por la elección metodológica de conservar Ias partes tradicionales de un recipiente como categorías de análisis pertinentes. El recipiente es así dividido en componentes, subdivididos a su vez en partes según el grado del análisis requerido. Se han propuesto definiciones de cada componente. Pero se trata menos de dar una definición demasiado estricta de los componentes que de establecer un sistema coherente que permita un análisis riguroso de los recipientes. Cada sección de un recipiente es analizada según el desarrollo de su perfil, de punto pertinente en punto pertinente en término de dirección y de forma. Medidas y relaciones de medidas que

Theoretical and experimental signal-to-noise ratio assessment in new direction sensing continuous-wave Doppler lidar

DEFF Research Database (Denmark)

Pedersen, Anders Tegtmeier; Foroughi Abari, Farzad; Mann, Jakob

2014-01-01

A new direction sensing continuous-wave Doppler lidar based on an image-reject homodyne receiver has recently been demonstrated at DTU Wind Energy, Technical University of Denmark. In this contribution we analyse the signal-to-noise ratio resulting from two different data processing methods both...... leading to the direction sensing capability. It is found that using the auto spectrum of the complex signal to determine the wind speed leads to a signal-to-noise ratio equivalent to that of a standard self-heterodyne receiver. Using the imaginary part of the cross spectrum to estimate the Doppler shift...... has the benefit of a zero-mean background spectrum, but comes at the expense of a decrease in the signal-to noise ratio by a factor of √2....

A new approach to analyse longitudinal epidemiological data with an excess of zeros

NARCIS (Netherlands)

Spriensma, A.S.; Hajós, T.R.S.; de Boer, M.R.; Heijmans, M.W.; Twisk, J.W.R.

2013-01-01

Background: Within longitudinal epidemiological research, count outcome variables with an excess of zeros frequently occur. Although these outcomes are frequently analysed with a linear mixed model, or a Poisson mixed model, a two-part mixed model would be better in analysing outcome variables with

Chemical and physical analyses of selected plants and soils from Puerto Rico (1981-2000)

Science.gov (United States)

M.J. Sanchez; E. Lopez; A.E. Lugo

2015-01-01

This report contains the results of analyses conducted at the chemistry laboratory of the International Institute of Tropical Forestry in Puerto Rico from 1981 to 2000. The data set includes 109,177 plant analyses and 70,729 soil analyses. We report vegetation chemical data by plant part, species, life zone, soil order, geology, or parent material. Soil data are...

PWR plant transient analyses using TRAC-PF1

International Nuclear Information System (INIS)

Ireland, J.R.; Boyack, B.E.

1984-01-01

This paper describes some of the pressurized water reactor (PWR) transient analyses performed at Los Alamos for the US Nuclear Regulatory Commission using the Transient Reactor Analysis Code (TRAC-PF1). Many of the transient analyses performed directly address current PWR safety issues. Included in this paper are examples of two safety issues addressed by TRAC-PF1. These examples are pressurized thermal shock (PTS) and feed-and-bleed cooling for Oconee-1. The calculations performed were plant specific in that details of both the primary and secondary sides were modeled in addition to models of the plant integrated control systems. The results of these analyses show that for these two transients, the reactor cores remained covered and cooled at all times posing no real threat to the reactor system nor to the public

msgbsR: An R package for analysing methylation-sensitive restriction enzyme sequencing data.

Science.gov (United States)

Mayne, Benjamin T; Leemaqz, Shalem Y; Buckberry, Sam; Rodriguez Lopez, Carlos M; Roberts, Claire T; Bianco-Miotto, Tina; Breen, James

2018-02-01

Genotyping-by-sequencing (GBS) or restriction-site associated DNA marker sequencing (RAD-seq) is a practical and cost-effective method for analysing large genomes from high diversity species. This method of sequencing, coupled with methylation-sensitive enzymes (often referred to as methylation-sensitive restriction enzyme sequencing or MRE-seq), is an effective tool to study DNA methylation in parts of the genome that are inaccessible in other sequencing techniques or are not annotated in microarray technologies. Current software tools do not fulfil all methylation-sensitive restriction sequencing assays for determining differences in DNA methylation between samples. To fill this computational need, we present msgbsR, an R package that contains tools for the analysis of methylation-sensitive restriction enzyme sequencing experiments. msgbsR can be used to identify and quantify read counts at methylated sites directly from alignment files (BAM files) and enables verification of restriction enzyme cut sites with the correct recognition sequence of the individual enzyme. In addition, msgbsR assesses DNA methylation based on read coverage, similar to RNA sequencing experiments, rather than methylation proportion and is a useful tool in analysing differential methylation on large populations. The package is fully documented and available freely online as a Bioconductor package ( https://bioconductor.org/packages/release/bioc/html/msgbsR.html ).

Direct time integration of Maxwell's equations in linear dispersive media with absorption for scattering and propagation of femtosecond electromagnetic pulses

Science.gov (United States)

Joseph, Rose M.; Hagness, Susan C.; Taflove, Allen

1991-01-01

The initial results for femtosecond pulse propagation and scattering interactions for a Lorentz medium obtained by a direct time integration of Maxwell's equations are reported. The computational approach provides reflection coefficients accurate to better than 6 parts in 10,000 over the frequency range of dc to 3 x 10 to the 16th Hz for a single 0.2-fs Gaussian pulse incident upon a Lorentz-medium half-space. New results for Sommerfeld and Brillouin precursors are shown and compared with previous analyses. The present approach is robust and permits 2D and 3D electromagnetic pulse propagation directly from the full-vector Maxwell's equations.

Part-time and full-time medical specialists, are there differences in allocation of time?

Directory of Open Access Journals (Sweden)

Groenewegen Peter P

2006-03-01

Full Text Available Abstract Background An increasing number of medical specialists prefer to work part-time. This development can be found worldwide. Problems to be faced in the realization of part-time work in medicine include the division of night and weekend shifts, as well as communication between physicians and continuity of care. People tend to think that physicians working part-time are less devoted to their work, implying that full-time physicians complete a greater number of tasks. The central question in this article is whether part-time medical specialists allocate their time differently to their tasks than full-time medical specialists. Methods A questionnaire was sent by mail to all internists (N = 817, surgeons (N = 693 and radiologists (N = 621 working in general hospitals in the Netherlands. Questions were asked about the actual situation, such as hours worked and night and weekend shifts. The response was 53% (n = 411 for internists, 52% (n = 359 for surgeons, and 36% (n = 213 for radiologists. Due to non-response on specific questions there were 367 internists, 316 surgeons, and 71 radiologists included in the analyses. Multilevel analyses were used to analyze the data. Results Part-time medical specialists do not spend proportionally more time on direct patient care. With respect to night and weekend shifts, part-time medical specialists account for proportionally more or an equal share of these shifts. The number of hours worked per FTE is higher for part-time than for full-time medical specialists, although this difference is only significant for surgeons. Conclusion In general, part-time medical specialists do their share of the job. However, we focussed on input only. Besides input, output like the numbers of services provided deserves attention as well. The trend in medicine towards more part-time work has an important consequence: more medical specialists are needed to get the work done. Therefore, a greater number of medical specialists

Taking part in 'Understanding Your Child's Behaviour' and positive changes for parents.

Science.gov (United States)

Appleton, Rebecca; Douglas, Hazel; Rheeston, Mary

2016-02-01

ABSTRACT The Solihull Approach's Understanding Your Child's Behaviour (UYCB) is a 10-session group for parents run by facilitators in their local area. Previous studies have shown that parents enjoy taking part in the group, and that UYCB can reduce problematic behaviours in children. Building on this research, the present study evaluated whether UYCB programmes run more recently in the UK were rated as positively by parents, and what positive changes were reported by parents. Both quantitative and qualitative data was analysed from 105 parents who took part in 18 different UYCB groups between 2012 and 2015. The results of this analysis showed that 90 per cent of parents found the group a great place to relax and share experiences, 93 per cent rated the group as 'great' for helping them understand their child, and 92 per cent gave a 'great' rating for helping them identify changes. In addition to this, content analysis showed that 47 per cent of parents reported having a better relationship with their child after taking part, 42 per cent said they were more confident, and importantly six per cent reported a significant positive change in their lives generally as a direct result of UYCB.

Tracking the direct impact of rainfall on groundwater at Mt. Fuji by multiple analyses including microbial DNA

Directory of Open Access Journals (Sweden)

A. Sugiyama

2018-02-01

Full Text Available A total of 2 to 3 million tons of spring water flushes out from the foot of Mt. Fuji, the largest volcanic mountain in Japan. Based on the concept of piston flow transport, residence time of stored groundwater at Mt. Fuji was estimated at  ∼  15–30 years by the 36Cl ∕ Cl ratio (Tosaki et al., 2011. This range, however, represents the average residence time of groundwater that was mixed before it flushed out. To elucidate the route of groundwater in a given system, we determined signatures of direct impacts of rainfall on groundwater, using microbial, stable isotopic (δ18O, and chemical analyses (concentration of silica. Chemical analysis of the groundwater gave an average value of the water, which was already mixed with waters from various sources and routes in the subsurface environment. The microbial analysis suggested locations of water origin and paths. In situ observation during four rainfall events revealed that the stable oxygen isotopic signature obtained from spring water (at 726 m a.s.l., site SP-0 m and shallow groundwater (at 150 m a.s.l., site GW-42 m, where the average recharge height from rainfall was 1700–1800 m, became greater than values observed prior to a torrential rain producing more than 300 mm of precipitation. The concentration of silica decreased after this event. In addition, the abundance of Bacteria in spring water increased, suggesting the influence of heavy rain. Such changes did not appear when rainfall was less than 100 mm per event. The above findings indicate a rapid flow of rain through the shallow part of the aquifer, which appeared within a few weeks of torrential rain extracting abundant microbes from soil in the studied geologic setting. Interestingly, we found that after the torrential rain, the abundance of Archaea increased in the deep groundwater at site GW-550 m,  ∼  12 km downstream of SP-0 m. However, chemical parameters did not show any change

Direct radiocarbon dating and genetic analyses on the purported Neanderthal mandible from the Monti Lessini (Italy).

Science.gov (United States)

Talamo, Sahra; Hajdinjak, Mateja; Mannino, Marcello A; Fasani, Leone; Welker, Frido; Martini, Fabio; Romagnoli, Francesca; Zorzin, Roberto; Meyer, Matthias; Hublin, Jean-Jacques

2016-07-08

Anatomically modern humans replaced Neanderthals in Europe around 40,000 years ago. The demise of the Neanderthals and the nature of the possible relationship with anatomically modern humans has captured our imagination and stimulated research for more than a century now. Recent chronological studies suggest a possible overlap between Neanderthals and anatomically modern humans of more than 5,000 years. Analyses of ancient genome sequences from both groups have shown that they interbred multiple times, including in Europe. A potential place of interbreeding is the notable Palaeolithic site of Riparo Mezzena in Northern Italy. In order to improve our understanding of prehistoric occupation at Mezzena, we analysed the human mandible and several cranial fragments from the site using radiocarbon dating, ancient DNA, ZooMS and isotope analyses. We also performed a more detailed investigation of the lithic assemblage of layer I. Surprisingly we found that the Riparo Mezzena mandible is not from a Neanderthal but belonged to an anatomically modern human. Furthermore, we found no evidence for the presence of Neanderthal remains among 11 of the 13 cranial and post-cranial fragments re-investigated in this study.

NASA directives master list and index

Science.gov (United States)

1995-01-01

This handbook sets forth in two parts, Master List of Management Directives and Index to NASA Management Directives, the following information for the guidance of users of the NASA Management Directives System. Chapter 1 contains introductory information material on how to use this handbook. Chapter 2 is a complete master list of agencywide management directives, describing each directive by type, number, effective date, expiration date, title, and organization code of the office responsible for the directive. Chapter 3 includes a consolidated numerical list of all delegations of authority and a breakdown of such delegation by the office or center to which special authority is assigned. Chapter 4 sets forth a consolidated list of all NASA handbooks (NHB's) and important footnotes covering the control and ordering of such documents. Chapter 5 is a consolidated list of NASA management directives applicable to the Jet Propulsion Laboratory. Chapter 6 is a consolidated list of NASA regulations published in the Code of Federal Regulations. Chapter 7 is a consolidated list of NASA regulations published in Title 14 of the Code of Federal Regulations. Complementary manuals to the NASA Management Directives System are described in Chapter 8. The second part contains an in depth alphabetical index to all NASA management directives other than handbooks, most of which are indexed by titles only.

Multicollinearity in spatial genetics: separating the wheat from the chaff using commonality analyses.

Science.gov (United States)

Prunier, J G; Colyn, M; Legendre, X; Nimon, K F; Flamand, M C

2015-01-01

Direct gradient analyses in spatial genetics provide unique opportunities to describe the inherent complexity of genetic variation in wildlife species and are the object of many methodological developments. However, multicollinearity among explanatory variables is a systemic issue in multivariate regression analyses and is likely to cause serious difficulties in properly interpreting results of direct gradient analyses, with the risk of erroneous conclusions, misdirected research and inefficient or counterproductive conservation measures. Using simulated data sets along with linear and logistic regressions on distance matrices, we illustrate how commonality analysis (CA), a detailed variance-partitioning procedure that was recently introduced in the field of ecology, can be used to deal with nonindependence among spatial predictors. By decomposing model fit indices into unique and common (or shared) variance components, CA allows identifying the location and magnitude of multicollinearity, revealing spurious correlations and thus thoroughly improving the interpretation of multivariate regressions. Despite a few inherent limitations, especially in the case of resistance model optimization, this review highlights the great potential of CA to account for complex multicollinearity patterns in spatial genetics and identifies future applications and lines of research. We strongly urge spatial geneticists to systematically investigate commonalities when performing direct gradient analyses. © 2014 John Wiley & Sons Ltd.

Analysing Harmonic Motions with an iPhone's Magnetometer

Science.gov (United States)

Yavuz, Ahmet; Temiz, Burak Kagan

2016-01-01

In this paper, we propose an experiment for analysing harmonic motion using an iPhone's (or iPad's) magnetometer. This experiment consists of the detection of magnetic field variations obtained from an iPhone's magnetometer sensor. A graph of harmonic motion is directly displayed on the iPhone's screen using the "Sensor Kinetics"…

Current and Future Parts Management at NASA

Science.gov (United States)

Sampson, Michael J.

2011-01-01

This presentation provides a high level view of current and future electronic parts management at NASA. It describes a current perspective of the new human space flight direction that NASA is beginning to take and how that could influence parts management in the future. It provides an overview of current NASA electronic parts policy and how that is implemented at the NASA flight Centers. It also describes some of the technical challenges that lie ahead and suggests approaches for their mitigation. These challenges include: advanced packaging, obsolescence and counterfeits, the global supply chain and Commercial Crew, a new direction by which NASA will utilize commercial launch vehicles to get astronauts to the International Space Station.

Thermodynamic and thermoeconomic analyses of a trigeneration (TRIGEN) system with a gas-diesel engine: Part I - Methodology

International Nuclear Information System (INIS)

Balli, Ozgur; Aras, Haydar; Hepbasli, Arif

2010-01-01

This paper consists of two parts. Part 1 deals with the thermodynamic and thermoeconomic methodology of a trigeneration (TRIGEN) system with a rated output of 6.5 MW gas-diesel engine while the application of the methodology is presented in Part 2. The system has been installed in the Eskisehir Industry Estate Zone in Turkey. Thermodynamic methodology includes the relations and performance parameters for energy and exergy analysis, while thermoeconomic methodology covers the cost balance relations, cost of products and thermodynamic inefficiencies, relative cost difference and exergoeconomic factor.

Mechanical analysis of cylindrical part of canisters for spent nuclear fuel

International Nuclear Information System (INIS)

Ikonen, K.

2005-06-01

This report describes mechanical analyses of cylindrical part of the VVER 440-, BWR and EPR-type canisters for spent nuclear fuel. The task was first to evaluate the stresses at maximum design pressure and further by increasing pressure load to determine the limit collapse load and corresponding safety factor. Maximum design pressure 44 MPa is a sum of the hydrostatic pressure 30 MPa caused by 3 km ice layer, 7 MPa caused by ground water pressure at the deepest disposal depth of 700 m and 7 MPa from bentonite swelling pressure. The analysis presented in this report concern the middle area of the canisters, where the cast iron insert is considered to be more critical than in the ends of the canister. For the model a piece from the middle area of the canister was separated by two planes perpendicular to the axis of the canister. This piece was studied first by two-dimensional plane strain model, where the planes are constrained and no elongation of the canister takes place. In the second model one of the planes was constrained and the other plane was allowed to displace in axial direction, which remains as a plane during deformation and to which axial pressure force is directed. This analysis, which corresponds better the real condition in the canister, was performed as threedimensional. The analyses gave however practically equal results due to plastic deformation. Thus the analysis can be done by two-dimensional plane strain model leading to same accuracy with less computation effort. Analyses were performed as large displacement and large strain analyses by the PASULA computing package, which has been developed at VTT for a variety of structural analysis and for heat conduction calculations. A special routine was developed for automatic mesh generation. Before the analysis of the VVER 440-, BWR- and EPR-type canisters the calculation methodology was validated with test results, which were received from pressure tests performed with a short BWR canister in Germany

Repeated sprint ability in young basketball players: multi-direction vs. one-change of direction (Part 1

Directory of Open Access Journals (Sweden)

Johnny ePadulo

2016-04-01

Full Text Available The aim of the present study was to examine the reliability of a novel multi-direction repeated sprint ability test (RSM; 10×(6×5-m compared with a repeated sprint ability test (RSA with one change of direction (10×(2×15-m, and the relationship of the RSM and RSA with Yo-Yo intermittent recovery test level 1 (Yo-Yo IR1 and jump performances [squat jump (SJ and counter-movement-jump (CMJ]. Thirty-six (male, n=14, female n=22 young basketball players (age 16.0±0.9 yrs performed the RSM, RSA, Yo-Yo IR1, SJ and CMJ, and were re-tested only for RSM and RSA after one week. The absolute error of reliability (standard error of the measurement was lower than 0.212-s and 0.617-s for the time variables of the RSA and RSM test, respectively. Performance in the RSA and RSM test significantly correlated with CMJ and SJ. The best time, worst time and total time of the RSA and RSM test were negatively correlated with Yo-Yo IR1 distance. Based on these findings, consistent with previously published studies, it was concluded that the novel RSM test was valid and reliable.

"Analysing Genre: Language Use in Professional Settings." A Review.

Science.gov (United States)

Drury, Helen

1995-01-01

"Analysing Genre," by Vijay K. Bhatia, is a timely addition to the literature on genre analysis in English for specific purposes. It is divided into three parts: the first provides theoretical background; the second explains how genre analysis works in different academic and professional settings; and the third exemplifies the…

SPSS for Starters, Part 2

CERN Document Server

Cleophas, Ton J

2012-01-01

The first part of this title contained all statistical tests that are relevant for starters on SPSS, and included standard parametric and non-parametric tests for continuous and binary variables, regression methods, trend tests, and reliability and validity assessments of diagnostic tests. The current part 2 of this title reviews multistep methods, multivariate models, assessments of missing data, performance of diagnostic tests, meta-regression, Poisson regression, confounding and interaction, and survival analyses using log tests and segmented time-dependent Cox regression. Methods for asses

Treatment of spices with ionizing radiation - chemical, organoleptical, microbiological and toxicological analyses. Pt. 2

International Nuclear Information System (INIS)

Schuettler, C.; Boegl, W.

1984-09-01

In the present second part of a study of the relevant literature the results of tests on 14 radiation treated spices and 2 radiation treated spice-mixtures were evaluated. The tests in this part contain mainly toxicological but also chemical and sensorial analyses. Most of the spices were treated with gamma radiation from cobalt-60 sources with doses between 80 Gy and 60 kGy. This part contains a cumulated subject index for part 1 and part 2. (orig./AJ) [de

Seismic risk analyses in the German Risk Study, phase B

International Nuclear Information System (INIS)

Hosser, D.; Liemersdorf, H.

1991-01-01

The paper discusses some aspects of the seismic risk part of the German Risk Study for Nuclear Power Plants, Phase B. First simplified analyses in Phase A of the study allowed only a rough classification of structures and systems of the PWR reference plant according to their seismic risk contribution. These studies were extended in Phase B using improved models for the dynamic analyses of buildings, structures and components as well as for the probabilistic analyses of seismic loading, failure probabilities and event trees. The methodology of deriving probabilistic seismic load descriptions is explained and compared with the methods in Phase A of the study and in other studies. Some details of the linear and nonlinear dynamic analyses of structures are reported in order to demonstrate the influence of different assumptions for material behaviour and failure criteria. The probabilistic structural and event tree analyses are discussed with respect to distribution assumptions, acceptable simplifications and model uncertainties. Some results for the PWR reference plant are given. (orig.)

Sequence analyses and 3D structure prediction of two Type III ...

African Journals Online (AJOL)

Internet

2012-04-17

Apr 17, 2012 ... analyses were performed using the sequence data of growth hormone gene (gh) ... used as a phylogenetic marker for different taxonomic ..... structural changes have been observed in some parts of ..... of spatial restraints.

Material forming apparatus using a directed droplet stream

Science.gov (United States)

Holcomb, David E.; Viswanathan, Srinath; Blue, Craig A.; Wilgen, John B.

2000-01-01

Systems and methods are described for rapidly forming precision metallic and intermetallic alloy net shape parts directly from liquid metal droplets. A directed droplet deposition apparatus includes a crucible with an orifice for producing a jet of material, a jet destabilizer, a charging structure, a deflector system, and an impact zone. The systems and methods provide advantages in that fully dense, microstructurally controlled parts can be fabricated at moderate cost.

arXiv Statistical Analyses of Higgs- and Z-Portal Dark Matter Models

CERN Document Server

Ellis, John; Marzola, Luca; Raidal, Martti

2018-06-12

We perform frequentist and Bayesian statistical analyses of Higgs- and Z-portal models of dark matter particles with spin 0, 1/2 and 1. Our analyses incorporate data from direct detection and indirect detection experiments, as well as LHC searches for monojet and monophoton events, and we also analyze the potential impacts of future direct detection experiments. We find acceptable regions of the parameter spaces for Higgs-portal models with real scalar, neutral vector, Majorana or Dirac fermion dark matter particles, and Z-portal models with Majorana or Dirac fermion dark matter particles. In many of these cases, there are interesting prospects for discovering dark matter particles in Higgs or Z decays, as well as dark matter particles weighing $\\gtrsim 100$ GeV. Negative results from planned direct detection experiments would still allow acceptable regions for Higgs- and Z-portal models with Majorana or Dirac fermion dark matter particles.

The spatial patterns of directional phenotypic selection.

Science.gov (United States)

Siepielski, Adam M; Gotanda, Kiyoko M; Morrissey, Michael B; Diamond, Sarah E; DiBattista, Joseph D; Carlson, Stephanie M

2013-11-01

Local adaptation, adaptive population divergence and speciation are often expected to result from populations evolving in response to spatial variation in selection. Yet, we lack a comprehensive understanding of the major features that characterise the spatial patterns of selection, namely the extent of variation among populations in the strength and direction of selection. Here, we analyse a data set of spatially replicated studies of directional phenotypic selection from natural populations. The data set includes 60 studies, consisting of 3937 estimates of selection across an average of five populations. We performed meta-analyses to explore features characterising spatial variation in directional selection. We found that selection tends to vary mainly in strength and less in direction among populations. Although differences in the direction of selection occur among populations they do so where selection is often weakest, which may limit the potential for ongoing adaptive population divergence. Overall, we also found that spatial variation in selection appears comparable to temporal (annual) variation in selection within populations; however, several deficiencies in available data currently complicate this comparison. We discuss future research needs to further advance our understanding of spatial variation in selection. © 2013 John Wiley & Sons Ltd/CNRS.

The spatial patterns of directional phenotypic selection

KAUST Repository

Siepielski, Adam M.

2013-09-12

Local adaptation, adaptive population divergence and speciation are often expected to result from populations evolving in response to spatial variation in selection. Yet, we lack a comprehensive understanding of the major features that characterise the spatial patterns of selection, namely the extent of variation among populations in the strength and direction of selection. Here, we analyse a data set of spatially replicated studies of directional phenotypic selection from natural populations. The data set includes 60 studies, consisting of 3937 estimates of selection across an average of five populations. We performed meta-analyses to explore features characterising spatial variation in directional selection. We found that selection tends to vary mainly in strength and less in direction among populations. Although differences in the direction of selection occur among populations they do so where selection is often weakest, which may limit the potential for ongoing adaptive population divergence. Overall, we also found that spatial variation in selection appears comparable to temporal (annual) variation in selection within populations; however, several deficiencies in available data currently complicate this comparison. We discuss future research needs to further advance our understanding of spatial variation in selection. © 2013 John Wiley & Sons Ltd/CNRS.

Available forest biomass for new energetic and industrial prospects. Part 1: analysis and synthesis of existing studies compiled at the international level. Part 2: volume calculations. Part 3: economic part. Final report

International Nuclear Information System (INIS)

2007-01-01

Motivated by new energetic constraints and the interest of biomass, the authors report a bibliographical survey of studies concerning the evaluation of the available forest biomass. They comment the geographical and time distribution of the identified and compiled studies. They analyse their different topics. Then, they discuss the various field hypotheses, discuss and comments various resource assessment methodologies. They comment the resource the French forest can be, present a synthesis of the available resource at the regional level according to the different studies. They propose a review of some technical-economical aspects (costs, energy cost, price evolutions, improvement of the wood-energy mobilization). The second part proposes a whole set of volume calculations for different forest types (clusters or plantations of trees, copses, sawmills products), for industry and household consumption. It discusses the available volumes with respect to accessibility, additional available volumes, and possible improvements. The third part analyses, comments and discusses the wood market and wood energetic uses, and the possible supply curves for wood energetic uses by 2016

Radiological and acetomorphine analysis of the symmetry and direction of evolution of skulls from some historic populations

International Nuclear Information System (INIS)

Gawlikowska-Sroka, A.

2006-01-01

Introduction: Asymmetry is a common phenomenon in nature. It is typical for the human body and for the skull as its part. Knowledge of asymmetry and normal anatomy, especially of variability which does not represent pathology but distinguishes individuals is the basis for correct interpretation of radiological findings concerning the skull both in research and diagnostic examinations widely performed in surgery, neurology, neurosurgery, internal medicine, or pediatrics. Analysis of fluctuating asymmetry reveals the influence of stress factors on human development and the ability of the organism to defend itself against stress.The aim of this work was to analyse the asymmetry of skulls from some historic populations and to describe changes in their anatomy over the ages. Material and methods: The material consisted of three skull groups: one contemporary with 82 skulls and two mediaeval (52 skulls from Cedynia and 77 skulls from Grodek on Bug). Direct measurements were done and the skull was X-rayed in the Posterior-Anterior and skull-base projections. Images were scanned and calibrated with MicroStation 95 Academic Edition software. Helmert's transformation with first-order polynomial was done to attain a suitable geometry. Vectorisation of axes and areas was performed on reference material. Using tools for measurement of vector elements, the distance between bilateral points of both sides of the skull were obtained. Data were analysed statistically. Results: The results of measurements were used to study the directional and fluctuating asymmetry. It was found that asymmetry of the skull was present in both historic populations. The following conclusions were drawn: changes in the distribution of directional and fluctuating asymmetry for individual dimensions have taken place over the ages. A high level of directional asymmetry in the facial part and fluctuating asymmetry in the calvaria is typical for contemporary skulls. The reverse is true for relations in the

Neuronal network analyses: premises, promises and uncertainties

OpenAIRE

Parker, David

2010-01-01

Neuronal networks assemble the cellular components needed for sensory, motor and cognitive functions. Any rational intervention in the nervous system will thus require an understanding of network function. Obtaining this understanding is widely considered to be one of the major tasks facing neuroscience today. Network analyses have been performed for some years in relatively simple systems. In addition to the direct insights these systems have provided, they also illustrate some of the diffic...

Progress Report on Computational Analyses of Water-Based NSTF

Energy Technology Data Exchange (ETDEWEB)

Lv, Q. [Argonne National Lab. (ANL), Argonne, IL (United States); Kraus, A. [Argonne National Lab. (ANL), Argonne, IL (United States); Hu, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Bucknor, M. [Argonne National Lab. (ANL), Argonne, IL (United States); Lisowski, D. [Argonne National Lab. (ANL), Argonne, IL (United States); Nunez, D. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-08-01

CFD analysis has been focused on important component-level phenomena using STARCCM+ to supplement the system analysis of integral system behavior. A notable area of interest was the cavity region. This area is of particular interest for CFD analysis due to the multi-dimensional flow and complex heat transfer (thermal radiation heat transfer and natural convection), which are not simulated directly by RELAP5. CFD simulations allow for the estimation of the boundary heat flux distribution along the riser tubes, which is needed in the RELAP5 simulations. The CFD results can also provide additional data to help establish what level of modeling detail is necessary in RELAP5. It was found that the flow profiles in the cavity region are simpler for the water-based concept than for the air-cooled concept. The local heat flux noticeably increases axially, and is higher in the fins than in the riser tubes. These results were utilized in RELAP5 simulations as boundary conditions, to provide better temperature predictions in the system level analyses. It was also determined that temperatures were higher in the fins than the riser tubes, but within design limits for thermal stresses. Higher temperature predictions were identified in the edge fins, in part due to additional thermal radiation from the side cavity walls.

Analysing the agricultural cost and non-market benefits of implementing the water framework directive

NARCIS (Netherlands)

Bateman, I.J.; Brouwer, R.; Davies, H.; Day, B.H.; Deflandre, A.; Di Falco, S.; Georgiou, S.; Hadley, D.; Hutchins, M.; Jones, A.P.; Kay, D.; Leeks, G.; Lewis, M.; Lovett, A.A.; Neal, C.; Posen, P.; Rigby, D.; Turner, R.K.

2006-01-01

Implementation of the Water Framework Directive (WFD) represents a fundamental change in the management of water in Europe with a requirement that member states ensure 'good ecological status' for all water bodies by 2015. Agriculture is expected to bear a major share of WFD implementation costs as

Assessing Compatibility of Direct Detection Data: Halo-Independent Global Likelihood Analyses

CERN Document Server

Gelmini, Graciela B.

2016-10-18

We present two different halo-independent methods utilizing a global maximum likelihood that can assess the compatibility of dark matter direct detection data given a particular dark matter model. The global likelihood we use is comprised of at least one extended likelihood and an arbitrary number of Poisson or Gaussian likelihoods. In the first method we find the global best fit halo function and construct a two sided pointwise confidence band, which can then be compared with those derived from the extended likelihood alone to assess the joint compatibility of the data. In the second method we define a "constrained parameter goodness-of-fit" test statistic, whose $p$-value we then use to define a "plausibility region" (e.g. where $p \\geq 10\\%$). For any halo function not entirely contained within the plausibility region, the level of compatibility of the data is very low (e.g. $p < 10 \\%$). As an example we apply these methods to CDMS-II-Si and SuperCDMS data, assuming dark matter particles with elastic s...

Gyrokinetic analyses of core heat transport in JT-60U plasmas with different toroidal rotation direction

International Nuclear Information System (INIS)

Narita, Emi; Fukuda, Takeshi; Honda, Mitsuru; Hayashi, Nobuhiko; Urano, Hajime; Ide, Shunsuke

2015-01-01

Tokamak plasmas with an internal transport barrier (ITB) are capable of maintaining improved confinement performance. The ITBs formed in plasmas with the weak magnetic shear and the weak radial electric field shear are often observed to be modest. In these ITB plasmas, it has been found that the electron temperature ITB is steeper when toroidal rotation is in a co-direction with respect to the plasma current than when toroidal rotation is in a counter-direction. To clarify the relationship between the direction of toroidal rotation and heat transport in the ITB region, we examine dominant instabilities using the flux-tube gyrokinetic code GS2. The linear calculations show a difference in the real frequencies; the counter-rotation case has a more trapped electron mode than the co-rotation case. In addition, the nonlinear calculations show that with this difference, the ratio of the electron heat diffusivity χ_e to the ion's χ_i is higher for the counter-rotation case than for the co-rotation case. The difference in χ_e /χ_i agrees with the experiment. We also find that the effect of the difference in the flow shear between the two cases due to the toroidal rotation direction on the linear growth rate is not significant. (author)

Scaling Analysis for the Adsorption Transition in a Watermelon Network of n Directed Non-Intersecting Walks

Science.gov (United States)

Owczarek, A. L.; Essam, J. W.; Brak, R.

2001-02-01

The partition function for the problem of n directed non-intersecting walks interacting via contact potentials with a wall parallel to the direction of the walks has previously been calculated as an n×n determinant. Here, we describe how to analyse the scaling behaviour of this problem using alternative representations of the solution. In doing so we derive the asymptotics of the partition function of a watermelon network of n such walks for all temperatures, and so calculate the associated network exponents in the three regimes: desorbed, adsorbed, and at the adsorption transition. Furthermore, we derive the full scaling function around the adsorption transition for all n. At the adsorption transition we also derive a simple "product form" for the partition function. These results have, in part, been derived using recurrence relations satisfied by the original determinantal solution.

Chapter No.4. Safety analyses

International Nuclear Information System (INIS)

2002-01-01

In 2001 the activity in the field of safety analyses was focused on verification of the safety analyses reports for NPP V-2 Bohunice and NPP Mochovce concerning the new profiled fuel and probabilistic safety assessment study for NPP Mochovce. The calculation safety analyses were performed and expert reviews for the internal UJD needs were elaborated. An important part of work was performed also in solving of scientific and technical tasks appointed within bilateral projects of co-operation between UJD and its international partnership organisations as well as within international projects ordered and financed by the European Commission. All these activities served as an independent support for UJD in its deterministic and probabilistic safety assessment of nuclear installations. A special attention was paid to a review of probabilistic safety assessment study of level 1 for NPP Mochovce. The probabilistic safety analysis of NPP related to the full power operation was elaborated in the study and a contribution of the technical and operational improvements to the risk decreasing was quantified. A core damage frequency of the reactor was calculated and the dominant initiating events and accident sequences with the major contribution to the risk were determined. The target of the review was to determine the acceptance of the sources of input information, assumptions, models, data, analyses and obtained results, so that the probabilistic model could give a real picture of the NPP. The review of the study was performed in co-operation of UJD with the IAEA (IPSART mission) as well as with other external organisations, which were not involved in the elaboration of the reviewed document and probabilistic model of NPP. The review was made in accordance with the IAEA guidelines and methodical documents of UJD and US NRC. In the field of calculation safety analyses the UJD activity was focused on the analysis of an operational event, analyses of the selected accident scenarios

Network-derived inhomogeneity in monthly rainfall analyses over western Tasmania

International Nuclear Information System (INIS)

Fawcett, Robert; Trewin, Blair; Barnes-Keoghan, Ian

2010-01-01

Monthly rainfall in the wetter western half of Tasmania was relatively poorly observed in the early to middle parts of the 20th century, and this causes a marked inhomogeneity in the operational gridded monthly rainfall analyses generated by the Australian Bureau of Meteorology up until the end of 2009. These monthly rainfall analyses were generated for the period 1900 to 2009 in two forms; a national analysis at 0.25 0 latitude-longitude resolution, and a southeastern Australia regional analysis at 0.1 0 resolution. For any given month, they used all the monthly data from the standard Bureau rainfall gauge network available in the Australian Data Archive for Meteorology. Since this network has changed markedly since Federation (1901), there is obvious scope for network-derived inhomogeneities in the analyses. In this study, we show that the topography-resolving techniques of the new Australian Water Availability Project analyses, adopted as the official operational analyses from the start of 2010, substantially diminish those inhomogeneities, while using largely the same observation network. One result is an improved characterisation of recent rainfall declines across Tasmania. The new analyses are available at two resolutions, 0.25 0 and 0.05 0 .

Electrical drives for direct drive renewable energy systems

CERN Document Server

Mueller, Markus

2013-01-01

Wind turbine gearboxes present major reliability issues, leading to great interest in the current development of gearless direct-drive wind energy systems. Offering high reliability, high efficiency and low maintenance, developments in these direct-drive systems point the way to the next generation of wind power, and Electrical drives for direct drive renewable energy systems is an authoritative guide to their design, development and operation. Part one outlines electrical drive technology, beginning with an overview of electrical generators for direct drive systems. Principles of electrical design for permanent magnet generators are discussed, followed by electrical, thermal and structural generator design and systems integration. A review of power electronic converter technology and power electronic converter systems for direct drive renewable energy applications is then conducted. Part two then focuses on wind and marine applications, beginning with a commercial overview of wind turbine drive systems and a...

A Critique of the Meta-theoretical Explanations and Analyses of the ...

African Journals Online (AJOL)

conditions for the Stimulation and Attraction of Foreign Direct Investments. ... these explanations and analyses are able to sufficiently account for, and capture the critical forces, processes and factors that tend to shape the movement of capital globally.

Design Guidelines and Criteria for User/Operator Transactions with Battlefield Automated Systems. Volume III-A. Human Factors Analyses of User/ Operator Transactions with TACFIRE - The Tactical Fire Direction System

Science.gov (United States)

1981-02-01

7. Reseaarch Product 81-26 - DESIGN GUIDELINES AND CRITERIA FOR USER/ I;. I’OPERATOR TRANSACTIONS WITH BATTLEFIELD AUTOMIATED SYSTEMS I’ /HVtAN...FACTORS XWLYSES :’F K~R/ OPERATOR TRANSACTIONS WTHT TACFIRE - THE TACTICAL FIRE DiRECTION SY2T3EM A HUMAN FACTORS TECHNICAL AREA L~h~h K L-J 1’ U~~i~ ll...Battlefield Auto- Inter : Oct 1979-Feb 1981 mated Systems Volume III-A: Human Factors 4t C/ Analyses of User/Operator Transactions with 6. PERFORMING

Agricultural insurance under the Solvency II Directive

Directory of Open Access Journals (Sweden)

Njegomir Vladimir

2014-01-01

Full Text Available Solvency II Directive represents a new framework of unique solvency regulation of insurance and reinsurance companies in the European Union. Although it has not yet been implemented in national legislations, it can be concluded, based on the directive wording and conducted quantitative studies, that it will have implications on agricultural producers since they are the users of insurance services. The aim of the research presented in this paper is to analyse the implications of the new directive to agricultural producers since they are the insureds and the main actors of agribusiness. Firstly, the paper gives an overview of the basic features of the new regulatory framework and then it points at the issues and the needs for intensive application of Directive in order to improve the insurance business in Serbia. The process will direct the settlement of major claims, the ones that are typical of catastrophic risks in agriculture, towards the insurance, while the expectations from the government will be directed towards the regulation of the setting and economic measures (development and investment subsidies, cooperative movement. In addition, the paper points at the demands of the new regulation and analyses the implications of the new regulation regarding the settlement of claims resulting from major flood since it represents the example that proves the basic postulate.

Anomalous directional behaviour of the real parts of the induction arrows in the Eastern Alps. Tectonic and palaeographical implications

Energy Technology Data Exchange (ETDEWEB)

Gurk, M.; Schnegg, P.-A. [Universite' de Neuchatel, Groupe de Geomagnetisme, Institut de Geologie, Neuchatel (Switzerland)

2001-08-01

The electromagnetic induction pattern in the Eastern Alps is characterised by a (continuous) large-scale zone on which the real parts of the induction arrows show anomalous directional behaviour. This zone extends from the Penninic Domain of Eastern Switzerland (Graubuenden) probably into the Carpathian ranges. A coarse mesh of a Magnetotelluric (MT) and Geomagnetic Deep Sounding (GDS) station in the Alps of Graubuenden and Valais (Western Switzerland) indicates that this electromagnetic anomaly is restricted to the Mesozoic sediments of the North Penninic Buendnerschiefer-facies that begins in Eastern Switzerland and extends towards the east beneath Austroalpine, South Penninic and Southalpine units. Striking similarities in position and arrangement between this zone and the magnetic signature in Eastern Alps are found. The analysis of the GDS data with the method of the Hypothetical Event Analysis (HEA) shows that current channelling affects the electromagnetic fields in this zone and causes the anomalous direction of induction arrows. Based on the combined interpretation of GDS data from the Eastern Alps and West Hungary together with the recent data from Switzerland, the following geological implications are discussed: i) a spatial decoupling of induction processes from the upper to the lower crust; ii) a lower crustal conductive structure caused by the identification of the Northern Adriatic promontory or terrane; iii) the eastward continuation of the Buendnerschiefer-facies at least to the tectonic window of Rechnitz.

Anomalous directional behaviour of the real parts of the induction arrows in the Eastern Alps. Tectonic and palaeographical implications

International Nuclear Information System (INIS)

Gurk, M.; Schnegg, P.-A.

2001-01-01

The electromagnetic induction pattern in the Eastern Alps is characterised by a (continuous) large-scale zone on which the real parts of the induction arrows show anomalous directional behaviour. This zone extends from the Penninic Domain of Eastern Switzerland (Graubuenden) probably into the Carpathian ranges. A coarse mesh of a Magnetotelluric (MT) and Geomagnetic Deep Sounding (GDS) station in the Alps of Graubuenden and Valais (Western Switzerland) indicates that this electromagnetic anomaly is restricted to the Mesozoic sediments of the North Penninic Buendnerschiefer-facies that begins in Eastern Switzerland and extends towards the east beneath Austroalpine, South Penninic and Southalpine units. Striking similarities in position and arrangement between this zone and the magnetic signature in Eastern Alps are found. The analysis of the GDS data with the method of the Hypothetical Event Analysis (HEA) shows that current channelling affects the electromagnetic fields in this zone and causes the anomalous direction of induction arrows. Based on the combined interpretation of GDS data from the Eastern Alps and West Hungary together with the recent data from Switzerland, the following geological implications are discussed: i) a spatial decoupling of induction processes from the upper to the lower crust; ii) a lower crustal conductive structure caused by the identification of the Northern Adriatic promontory or terrane; iii) the eastward continuation of the Buendnerschiefer-facies at least to the tectonic window of Rechnitz

77 FR 42952 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2012-07-23

... Airworthiness Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... Airbus Model A318-112 and -121 airplanes; Model A319-111, -112, -115, - 132, and -133 airplanes; Model... MCAI states: During structural part assembly in Airbus production line, some nuts Part Number (P/N...

Flavonoid Analyses and Antimicrobial Activity of Various Parts of Phaleria macrocarpa (Scheff. Boerl Fruit

Directory of Open Access Journals (Sweden)

Ehsan Oskoueian

2011-05-01

Full Text Available Phaleria macrocarpa (Scheff. Boerl (Thymelaceae is commonly known as ‘Crown of God’, ‘Mahkota Dewa’, and ‘Pau’. It originates from Papua Island, Indonesia and it grows in tropical areas. Empirically, it is potent in treating the hypertensive,diabetic, cancer and diuretic patients. It has a long history of ethnopharmacological usage, and the lack of information about its biological activities led us to investigate the possible biological activities by characterisation of flavonoids and antimicrobial activity of various part of P. macrocarpa against pathogenic bacteria and fungi. The results showed that kaempferol, myricetin, naringin, and rutin were the major flavonoids present in the pericarp while naringin and quercetin were found in the mesocarp and seed. Furthermore, the antibacterial activity of different parts of P. macrocarpa fruit showed a weak ability to moderate antibacterial activity against pathogenic tested bacteria (inhibition range: 0.93–2.17 cm at concentration of 0.3 mg/disc. The anti fungi activity was only found in seed extract against Aspergillus niger (1.87 cm at concentration of 0.3 mg/well. From the results obtained, P. macrocarpa fruit could be considered as a natural antimicrobial source due to the presence of flavonoid compounds.

Enter the Madcap Prince of Wales: Students Directing "Henry IV, Part I."

Science.gov (United States)

Earthman, Elise Ann

1993-01-01

Argues that William Shakespeare's "Henry IV, Part I" is an appropriate and useful text for secondary English classrooms. Shows how the play lends itself to performance-based instruction. Outlines ways of accomplishing student engagement, using film versions, and assigning written work. (HB)

Monitoring coordinate measuring machines by calibrated parts

International Nuclear Information System (INIS)

Weckenmann, A; Lorz, J

2005-01-01

Coordinate measuring machines (CMM) are essential for quality assurance and production control in modern manufacturing. Due to the necessity of assuring traceability during the use of CMM, interim checks with calibrated objects carried out periodically. For this purpose usually special artefacts like standardized ball plates, hole plates, ball bars or step gages are measured. Measuring calibrated series parts would be more advantageous. Applying the substitution method of ISO 15530-3: 2000 such parts can be used. It is less cost intensive and less time consuming than measuring expensive special standardized objects in special programmed measurement routines. Moreover, the measurement results can directly compare with the calibration values; thus, direct information on systematic measurement deviations and uncertainty of the measured features are available. The paper describes a procedure for monitoring horizontal-arm CMMs with calibrated sheet metal series parts

Mechanical analyses on the digital behaviour of the Tokay gecko (Gekko gecko) based on a multi-level directional adhesion model.

Science.gov (United States)

Wu, Xuan; Wang, Xiaojie; Mei, Tao; Sun, Shaoming

2015-07-08

This paper proposes a multi-level hierarchical model for the Tokay gecko ( Gekko gecko ) adhesive system and analyses the digital behaviour of the G. gecko under macro/meso-level scale. The model describes the structures of G. gecko 's adhesive system from the nano-level spatulae to the sub-millimetre-level lamella. The G. gecko 's seta is modelled using inextensible fibril based on Euler's elastica theorem. Considering the side contact of the spatular pads of the seta on the flat and rigid substrate, the directional adhesion behaviour of the seta has been investigated. The lamella-induced attachment and detachment have been modelled to simulate the active digital hyperextension (DH) and the digital gripping (DG) phenomena. The results suggest that a tiny angular displacement within 0.25° of the lamellar proximal end is necessary in which a fast transition from attachment to detachment or vice versa is induced. The active DH helps release the torque to induce setal non-sliding detachment, while the DG helps apply torque to make the setal adhesion stable. The lamella plays a key role in saving energy during detachment to adapt to its habitat and provides another adhesive function which differs from the friction-dependent setal adhesion system controlled by the dynamic of G. gecko 's body.

SCALE: A modular code system for performing Standardized Computer Analyses for Licensing Evaluation. Volume 1, Part 2: Control modules S1--H1; Revision 5

International Nuclear Information System (INIS)

1997-03-01

SCALE--a modular code system for Standardized Computer Analyses Licensing Evaluation--has been developed by Oak Ridge National Laboratory at the request of the US Nuclear Regulatory Commission. The SCALE system utilizes well-established computer codes and methods within standard analysis sequences that (1) allow an input format designed for the occasional user and/or novice, (2) automated the data processing and coupling between modules, and (3) provide accurate and reliable results. System development has been directed at problem-dependent cross-section processing and analysis of criticality safety, shielding, heat transfer, and depletion/decay problems. Since the initial release of SCALE in 1980, the code system has been heavily used for evaluation of nuclear fuel facility and package designs. This revision documents Version 4.3 of the system

SCALE: A modular code system for performing Standardized Computer Analyses for Licensing Evaluation. Volume 2, Part 3: Functional modules F16--F17; Revision 5

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

SCALE--a modular code system for Standardized Computer Analyses Licensing Evaluation--has been developed by Oak Ridge National Laboratory at the request of the US Nuclear Regulatory Commission. The SCALE system utilizes well-established computer codes and methods within standard analysis sequences that (1) allow an input format designed for the occasional user and/or novice, (2) automated the data processing and coupling between modules, and (3) provide accurate and reliable results. System development has been directed at problem-dependent cross-section processing and analysis of criticality safety, shielding, heat transfer, and depletion/decay problems. Since the initial release of SCALE in 1980, the code system has been heavily used for evaluation of nuclear fuel facility and package designs. This revision documents Version 4.3 of the system.

SCALE: A modular code system for performing Standardized Computer Analyses for Licensing Evaluation. Volume 2, Part 3: Functional modules F16--F17; Revision 5

International Nuclear Information System (INIS)

1997-03-01

SCALE--a modular code system for Standardized Computer Analyses Licensing Evaluation--has been developed by Oak Ridge National Laboratory at the request of the US Nuclear Regulatory Commission. The SCALE system utilizes well-established computer codes and methods within standard analysis sequences that (1) allow an input format designed for the occasional user and/or novice, (2) automated the data processing and coupling between modules, and (3) provide accurate and reliable results. System development has been directed at problem-dependent cross-section processing and analysis of criticality safety, shielding, heat transfer, and depletion/decay problems. Since the initial release of SCALE in 1980, the code system has been heavily used for evaluation of nuclear fuel facility and package designs. This revision documents Version 4.3 of the system

Abuse of law in European tax law: an overview and some recent trends in the direct and indirect tax case law of the ECJ — part 2

OpenAIRE

Weber, Dennis

2013-01-01

This paper examines the right of the EU Member States to combat abuse, as defined in the case law of the European Court, in particular, the balance between enforcement of the principle of legal certainty, the right to choose the most favourable fiscal route and the right of states to combat tax avoidance. Part 2 analyses, inter alia, how specific an anti-abuse provisions should be, the burden of proof, tax jurisdiction shopping and the consequences of abuse

Utilization of Large Scale Surface Models for Detailed Visibility Analyses

Science.gov (United States)

Caha, J.; Kačmařík, M.

2017-11-01

This article demonstrates utilization of large scale surface models with small spatial resolution and high accuracy, acquired from Unmanned Aerial Vehicle scanning, for visibility analyses. The importance of large scale data for visibility analyses on the local scale, where the detail of the surface model is the most defining factor, is described. The focus is not only the classic Boolean visibility, that is usually determined within GIS, but also on so called extended viewsheds that aims to provide more information about visibility. The case study with examples of visibility analyses was performed on river Opava, near the Ostrava city (Czech Republic). The multiple Boolean viewshed analysis and global horizon viewshed were calculated to determine most prominent features and visibility barriers of the surface. Besides that, the extended viewshed showing angle difference above the local horizon, which describes angular height of the target area above the barrier, is shown. The case study proved that large scale models are appropriate data source for visibility analyses on local level. The discussion summarizes possible future applications and further development directions of visibility analyses.

Deflection type energy analyser for energetic electron beams in a beam-plasma system

International Nuclear Information System (INIS)

Michel, J.A.; Hogge, J.P.

1988-11-01

An energy analyser for the study of electron beam distribution functions in unmagnetized plasmas is described. This analyser is designed to avoid large electric fields which are created in multi-grid analysers and to measure directly the beam distribution function without differentiation. As an example of an application we present results on the propagation of an energetic beam (E b : 2.0 keV) in a plasma (n o : 1.10 10 cm -3 , T e : 1.4 eV) (author) 7 figs., 10 refs

Long working hours directly and indirectly (via short sleep duration) induce headache even in healthy white-collar men: cross-sectional and 1-year follow-up analyses.

Science.gov (United States)

Nagaya, Teruo; Hibino, Minoru; Kondo, Yasuaki

2018-01-01

Headache in employees may be linked with both overwork and sleep restriction induced by long working hours. Inter-relationships among working hours, sleep duration and headache were investigated. Cross-sectional analyses for prevalent headache (n = 35,908) and 1-year follow-up analyses for incident headache (n = 19,788) were conducted in apparently healthy white-collar men aged 25-59 years. Headache (yes/no), working hours and sleep duration were based on self-administered questionnaire. After determination of relationships between working hours and sleep duration, logistic regression analysis estimated odds ratio (OR) and 95% confidence interval for prevalent and incident headache according to working hours (35-44, 45-49, 50-59 and ≥60 h/week) and sleep duration (≥7, 6-6.9, 5-5.9 and working hours and sleep duration on OR were checked. Covariates in the analyses were age, body mass index, drinking, smoking and exercise. Prevalent and incident headache was found in 1979 (5.5%) men and 707 (3.6%) men, respectively. Working hours were inversely associated with sleep duration. OR for prevalent and incident headache rose with increasing working hours and with reducing sleep duration, regardless of influences of the covariates. Working hours and sleep duration had no interactive effects on OR for prevalent or incident headache. The results indicate that long working hours directly and indirectly (via short sleep duration) induce headache even in apparently healthy white-collar men. Headache in employees may be useful for early detection of adverse health effects by long working hours.

Une méthodologie d'analyse des effets de la globalisation sur les systèmes régionaux locaux

Directory of Open Access Journals (Sweden)

Silvana Lombardo

1999-06-01

Full Text Available Ce travail a pour but d'enrichir les études concernant les répercussions du changement de l'économie de l'entreprise au niveau global sur les modèles d'organisation territorial au niveau local les entreprises. La recherche part du constat d'une insuffisance du cadre d'étude et d'un manque d'information systématique généralisé. Dans ce but nous avons essayé d'approfondir certains aspects théoriques relatifs d'une part au modèle de réseau que relie les composantes du système territorial, et d'autre part aux effets de globalisation de l'entreprise.Nous avons abordé l'analyse des systèmes industriels de deux régions de l'Italie - les Abbruzes et le Lazio - très peu étudiées mais qui, dans les années dernières, ont montré de grands changements, notamment en ce qui concerne les PME et la formation de véritables systèmes locaux organisés afin de répondre d'une façon très active aux mutations du système économique global.L'analyse s'appuie sur une enquête directe par questionnaire adressée à un échantillon d'entreprises. La loi sur "la privacy" nous a contraintes à employer les données traditionnelles de l'Institut Central de Statistiques et de l'Union des Chambres de Commerce, à partir desquelles nous avons défini l'univers statistique et construit un échantillon représentatif.Les connaissances produites par l'analyse des données permettent de déterminer les formes des questions et d'identifier les aspects devant être approfondis. Les premières conclusions portent en particulier sur les facteurs principaux des choix de localisation de l'entreprise.

Uncertainty Analyses for Back Projection Methods

Science.gov (United States)

Zeng, H.; Wei, S.; Wu, W.

2017-12-01

So far few comprehensive error analyses for back projection methods have been conducted, although it is evident that high frequency seismic waves can be easily affected by earthquake depth, focal mechanisms and the Earth's 3D structures. Here we perform 1D and 3D synthetic tests for two back projection methods, MUltiple SIgnal Classification (MUSIC) (Meng et al., 2011) and Compressive Sensing (CS) (Yao et al., 2011). We generate synthetics for both point sources and finite rupture sources with different depths, focal mechanisms, as well as 1D and 3D structures in the source region. The 3D synthetics are generated through a hybrid scheme of Direct Solution Method and Spectral Element Method. Then we back project the synthetic data using MUSIC and CS. The synthetic tests show that the depth phases can be back projected as artificial sources both in space and time. For instance, for a source depth of 10km, back projection gives a strong signal 8km away from the true source. Such bias increases with depth, e.g., the error of horizontal location could be larger than 20km for a depth of 40km. If the array is located around the nodal direction of direct P-waves the teleseismic P-waves are dominated by the depth phases. Therefore, back projections are actually imaging the reflection points of depth phases more than the rupture front. Besides depth phases, the strong and long lasted coda waves due to 3D effects near trench can lead to additional complexities tested here. The strength contrast of different frequency contents in the rupture models also produces some variations to the back projection results. In the synthetic tests, MUSIC and CS derive consistent results. While MUSIC is more computationally efficient, CS works better for sparse arrays. In summary, our analyses indicate that the impact of various factors mentioned above should be taken into consideration when interpreting back projection images, before we can use them to infer the earthquake rupture physics.

76 FR 30040 - Proposed Airworthiness Directives Legal Interpretation

Science.gov (United States)

2011-05-24

.... SUMMARY: The Federal Aviation Administration published a proposed airworthiness directives legal... Administration (FAA) published a proposed airworthiness directives legal interpretation in the Federal Register... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2010...

The visual image of prefabricated houses and new directions in the urban and architectural development of settlements

Directory of Open Access Journals (Sweden)

Živa Deu

2000-01-01

Full Text Available On the basis of the general directions of sustainable development in the physical space, new, also detailed valuable and normative definitions for organising settlements have been defined. Urban design and architectural aspects are directed to planning according to given natural possibilities and typical form and identity of built structures. Studies and detailed analyses have shown that formerly established standards of the building culture consist of numerous valuable characteristics, which are in accordance with the principles of sustainable development. Prefabricated building, just like classical building, is a constituent part of the new process in the formation of settlements. To attain our goal, radical changes will be needed in the architectural design of prefabricated houses, because their present architecture is global, cosmopolitan and not adapted to the different natural conditions and existing typical built structures in Slovenia.

THE FOURIER SERIES USED IN ANALYSE OF THE CAM MECHANISMS FOR THE SHOEMAKING MACHINES (PART I

Directory of Open Access Journals (Sweden)

IOVAN-DRAGOMIR Alina

2016-05-01

Full Text Available A computer assisted procedure for the cinematic analysis of the mechanism of a cam is essential in making a certain type of research operations. They mainly refer to the optimization of operations running on specific machinery, or to the re-design of the mechanism, in order to make the mechanism digital. This analysis seems even more important, when we consider the fact that most of the machines used in shoe industry nowadays use a cam mechanism. The paper is devided in two parts. In first part, it is elaborated a method of finding of a function G(x, belonging to a Fourier series, which approximates the numerical values {xi, yi}, with the biggest accuracy. Finding the function that approximates the most accurately the data set, for the position parameters of the follower S(ω, ( will lead to a complete kinematic and dynamic analysis of the cam mechanism. These values repeat with T = 2π period. In second part, the method is tasted using MatCAD work sessions which allow a numerical and graphical analysis of the mathematical relations involved, in order to test the reability of the method. The set of experimental data are resulted after measuring a cam mechanism of a machine used in shoemaking.

Part-task training in the context of automation: current and future directions.

Science.gov (United States)

Gutzwiller, Robert S; Clegg, Benjamin A; Blitch, John G

2013-01-01

Automation often elicits a divide-and-conquer outlook. By definition, automation has been suggested to assume control over a part or whole task that was previously performed by a human (Parasuraman & Riley, 1997). When such notions of automation are taken as grounds for training, they readily invoke a part-task training (PTT) approach. This article outlines broad functions of automation as a source of PTT and reviews the PTT literature, focusing on the potential benefits and costs related to using automation as a mechanism for PTT. The article reviews some past work in this area and suggests a path to move beyond the type of work captured by the "automation as PTT" framework. An illustrative experiment shows how automation in training and PTT are actually separable issues. PTT with automation has some utility but ultimately remains an unsatisfactory framework for the future broad potential of automation during training, and we suggest that a new conceptualization is needed.

The Role of Direct Marketing in Relation with the Consumers in Kosovo

OpenAIRE

MSc. Halit Karaxha; MSc. Sejd Tolaj; Dr.Sc. Arjan Abazi

2016-01-01

Direct marketing is very important in creating good relations with clients for the presentation of new products/services, and to also achieve sales in the meantime. Direct marketing uses different techniques, such as e-mails, telephones, fairs, festivals and other techniques in order to directly communicate with clients by being very flexible, and it also allows immediate feedback. This paper consists of two parts: the first part is related to the review of literature regarding direct marketi...

Observing and analysing the 1997 general election : an introduction

NARCIS (Netherlands)

Rutten, M.M.E.M.; Mazrui, A.; Grignon, F.; Rutten, M.M.E.M.; Mazrui, A.; Grignon, F.

2001-01-01

The outcome of a three-day conference held at the African Studies Centre, Leiden, The Netherlands, in September 1998, this book on the 1997 Kenya general elections is organized in four parts: the direct pre-electoral background; technical and national analysis of the general elections, including the

Real-Time Multi-Directional Equipment Site

Data.gov (United States)

Federal Laboratory Consortium — As part of the George E. Brown, Jr. Network for Earthquake Engineering Simulation (NEES) Program, Lehigh University has established the Real-Time Multi-Directional...

Direct effects of fermented cow's milk product with Lactobacillus paracasei CBA L74 on human enterocytes.

Science.gov (United States)

Paparo, L; Aitoro, R; Nocerino, R; Fierro, C; Bruno, C; Canani, R Berni

2018-01-29

Cow's milk fermented with Lactobacillus paracasei CBA L74 (FM-CBAL74) exerts a preventive effect against infectious diseases in children. We evaluated if this effect is at least in part related to a direct modulation of non-immune and immune defence mechanisms in human enterocytes. Human enterocytes (Caco-2) were stimulated for 48 h with FM-CBAL74 at different concentrations. Cell growth was assessed by colorimetric assay; cell differentiation (assessed by lactase expression), tight junction proteins (zonula occludens1 and occludin), mucin 2, and toll-like receptor (TRL) pathways were analysed by real-time PCR; innate immunity peptide synthesis, beta-defensin-2 (HBD-2) and cathelicidin (LL-37) were evaluated by ELISA. Mucus layer thickness was analysed by histochemistry. FMCBA L74 stimulated cell growth and differentiation, tight junction proteins and mucin 2 expression, and mucus layer thickness in a dose-dependent fashion. A significant stimulation of HBD-2 and LL-37 synthesis, associated with a modulation of TLR pathway, was also observed. FM-CBAL74 regulates non-immune and immune defence mechanisms through a direct interaction with the enterocytes. These effects could be involved in the preventive action against infectious diseases demonstrated by this fermented product in children.

Assessing compatibility of direct detection data: halo-independent global likelihood analyses

Energy Technology Data Exchange (ETDEWEB)

Gelmini, Graciela B. [Department of Physics and Astronomy, UCLA,475 Portola Plaza, Los Angeles, CA 90095 (United States); Huh, Ji-Haeng [CERN Theory Division,CH-1211, Geneva 23 (Switzerland); Witte, Samuel J. [Department of Physics and Astronomy, UCLA,475 Portola Plaza, Los Angeles, CA 90095 (United States)

2016-10-18

We present two different halo-independent methods to assess the compatibility of several direct dark matter detection data sets for a given dark matter model using a global likelihood consisting of at least one extended likelihood and an arbitrary number of Gaussian or Poisson likelihoods. In the first method we find the global best fit halo function (we prove that it is a unique piecewise constant function with a number of down steps smaller than or equal to a maximum number that we compute) and construct a two-sided pointwise confidence band at any desired confidence level, which can then be compared with those derived from the extended likelihood alone to assess the joint compatibility of the data. In the second method we define a “constrained parameter goodness-of-fit” test statistic, whose p-value we then use to define a “plausibility region” (e.g. where p≥10%). For any halo function not entirely contained within the plausibility region, the level of compatibility of the data is very low (e.g. p<10%). We illustrate these methods by applying them to CDMS-II-Si and SuperCDMS data, assuming dark matter particles with elastic spin-independent isospin-conserving interactions or exothermic spin-independent isospin-violating interactions.

Certification of a uranium dioxide reference material for chemical analyses

International Nuclear Information System (INIS)

Le Duigou, Y.

1984-01-01

This report, issued by the Central Bureau for Nuclear Measurements (CBNM), describes the characterization of a uranium dioxide reference material with accurately determined uranium mass fraction for chemical analyses. The preparation, conditioning, homogeneity tests and the analyses performed on this material are described in Annex 1. The evaluation of the individual impurity results, total of impurities and uranium mass fraction are given in Annex 2. Information on a direct determination of uranium by titration is given in Annex 3. The uranium mass fraction (881.34+-0.13) g.kg -1 calculated in Annex 2 is given on the certificate

Follow-up analyses for the ANTT review

International Nuclear Information System (INIS)

Stillman, J. A.; Bauer, T. H.; Hill, R. N.; Wigeland, R. A.; Nuclear Engineering Division

2006-01-01

Early in FY04, the Advanced Nuclear Transformation Technology (ANTT) subcommittee of the Nuclear Energy Research Advisory Committee (NERAC) requested a report on repository benefits for recycling of key transuranics in existing light water-cooled reactors (LWRs). The ANTT reviewers specifically requested a quantification of how such a campaign would impact (improve) the achievable loading of nuclear waste in the Yucca Mountain facility. The request stipulated that the transuranics be separated from commercial spent nuclear fuel (CSNF) and recycled a finite number of times in LWR-compatible fuel forms. The spent fuel remaining at the end of the recycling campaign, as well as all other nuclear waste generated by spent fuel reprocessing, would be permanently disposed in a geologic repository. In response, two reports have been prepared and distributed as deliverables for the AFCI program. Reference 1 provides the final report which addresses the original ANTT sub-committee request. Plutonium, neptunium, and americium recycling strategies in assemblies fabricated from mixed-oxide (MOX), CORAIL (heterogeneous UO 2 and MOX), and inert-matrix fuel (IMF) forms were evaluated; the focus of the report is the time-dependent thermal response of the repository to a given loading of nuclear waste in the storage tunnels (drifts), as well as a quantification of how the loading could be increased relative to the reference direct disposal of CSNF. Reference 2 provides a more complete description of the neutronics and mass flow analyses which were completed as part of the study. That report also provides an analysis of the differences between the various recycling strategies and the underlying reactor physics

Risk-based analyses in support of California hazardous site remediation

International Nuclear Information System (INIS)

Ringland, J.T.

1995-08-01

The California Environmental Enterprise (CEE) is a joint program of the Department of Energy (DOE), Lawrence Livermore National Laboratory, Lawrence Berkeley Laboratory, and Sandia National Laboratories. Its goal is to make DOE laboratory expertise accessible to hazardous site cleanups in the state This support might involve working directly with parties responsible for individual cleanups or it might involve working with the California Environmental Protection Agency to develop tools that would be applicable across a broad range of sites. As part of its initial year's activities, the CEE supported a review to examine where laboratory risk and risk-based systems analysis capabilities might be most effectively applied. To this end, this study draws the following observations. The labs have a clear role in analyses supporting the demonstration and transfer of laboratory characterization or remediation technologies. The labs may have opportunities in developing broadly applicable analysis tools and computer codes for problems such as site characterization or efficient management of resources. Analysis at individual sites, separate from supporting lab technologies or prototyping general tools, may be appropriate only in limited circumstances. In any of these roles, the labs' capabilities extend beyond health risk assessment to the broader areas of risk management and risk-based systems analysis

Assimilation of wind speed and direction observations: results from real observation experiments

Directory of Open Access Journals (Sweden)

Feng Gao

2015-06-01

Full Text Available The assimilation of wind observations in the form of speed and direction (asm_sd by the Weather Research and Forecasting Model Data Assimilation System (WRFDA was performed using real data and employing a series of cycling assimilation experiments for a 2-week period, as a follow-up for an idealised post hoc assimilation experiment. The satellite-derived Atmospheric Motion Vectors (AMV and surface dataset in Meteorological Assimilation Data Ingest System (MADIS were assimilated. This new method takes into account the observation errors of both wind speed (spd and direction (dir, and WRFDA background quality control (BKG-QC influences the choice of wind observations, due to data conversions between (u,v and (spd, dir. The impacts of BKG-QC, as well as the new method, on the wind analysis were analysed separately. Because the dir observational errors produced by different platforms are not known or tuned well in WRFDA, a practical method, which uses similar assimilation weights in comparative trials, was employed to estimate the spd and dir observation errors. The asm_sd produces positive impacts on analyses and short-range forecasts of spd and dir with smaller root-mean-square errors than the u,v-based system. The bias of spd analysis decreases by 54.8%. These improvements result partly from BKG-QC screening of spd and dir observations in a direct way, but mainly from the independent impact of spd (dir data assimilation on spd (dir analysis, which is the primary distinction from the standard WRFDA method. The potential impacts of asm_sd on precipitation forecasts were evaluated. Results demonstrate that the asm_sd is able to indirectly improve the precipitation forecasts by improving the prediction accuracies of key wind-related factors leading to precipitation (e.g. warm moist advection and frontogenesis.

76 FR 9984 - Airworthiness Directives; B/E Aerospace, Continuous Flow Passenger Oxygen Mask Assembly, Part...

Science.gov (United States)

2011-02-23

..., Continuous Flow Passenger Oxygen Mask Assembly, Part Numbers 174006-(), 174080-(), 174085-(), 174095... manufacturer and part number of the oxygen mask assemblies installed, an inspection to determine the manufacturing date and modification status if certain oxygen mask assemblies are installed, and corrective...

Field sampling, preparation procedure and plutonium analyses of large freshwater samples

International Nuclear Information System (INIS)

Straelberg, E.; Bjerk, T.O.; Oestmo, K.; Brittain, J.E.

2002-01-01

This work is part of an investigation of the mobility of plutonium in freshwater systems containing humic substances. A well-defined bog-stream system located in the catchment area of a subalpine lake, Oevre Heimdalsvatn, Norway, is being studied. During the summer of 1999, six water samples were collected from the tributary stream Lektorbekken and the lake itself. However, the analyses showed that the plutonium concentration was below the detection limit in all the samples. Therefore renewed sampling at the same sites was carried out in August 2000. The results so far are in agreement with previous analyses from the Heimdalen area. However, 100 times higher concentrations are found in the lowlands in the eastern part of Norway. The reason for this is not understood, but may be caused by differences in the concentrations of humic substances and/or the fact that the mountain areas are covered with snow for a longer period of time every year. (LN)

Direct and semi-direct approaches to lepton mixing with a massless neutrino

International Nuclear Information System (INIS)

King, Stephen F.; Ludl, Patrick Otto

2016-01-01

We discuss the possibility of enforcing a massless Majorana neutrino in the direct and semi-direct approaches to lepton mixing, in which the PMNS matrix is partly predicted by subgroups of a discrete family symmetry, extending previous group searches up to order 1535. We find a phenomenologically viable scheme for the semi-direct approach based on Q(648) which contains Δ(27) and the quaternion group as subgroups. This leads to novel predictions for the first column of the PMNS matrix corresponding to a normal neutrino mass hierarchy with m_1=0, and sum rules for the mixing angles and phase which are characterised by the solar angle being on the low side θ_1_2∼31"∘ and the Dirac (oscillation) CP phase δ being either about ±45"∘ or ±π.

Phenotypic selection in natural populations: what limits directional selection?

Science.gov (United States)

Kingsolver, Joel G; Diamond, Sarah E

2011-03-01

Studies of phenotypic selection document directional selection in many natural populations. What factors reduce total directional selection and the cumulative evolutionary responses to selection? We combine two data sets for phenotypic selection, representing more than 4,600 distinct estimates of selection from 143 studies, to evaluate the potential roles of fitness trade-offs, indirect (correlated) selection, temporally varying selection, and stabilizing selection for reducing net directional selection and cumulative responses to selection. We detected little evidence that trade-offs among different fitness components reduced total directional selection in most study systems. Comparisons of selection gradients and selection differentials suggest that correlated selection frequently reduced total selection on size but not on other types of traits. The direction of selection on a trait often changes over time in many temporally replicated studies, but these fluctuations have limited impact in reducing cumulative directional selection in most study systems. Analyses of quadratic selection gradients indicated stabilizing selection on body size in at least some studies but provided little evidence that stabilizing selection is more common than disruptive selection for most traits or study systems. Our analyses provide little evidence that fitness trade-offs, correlated selection, or stabilizing selection strongly constrains the directional selection reported for most quantitative traits.

International food aid – directions of changes

Directory of Open Access Journals (Sweden)

Agnieszka Sapa

2012-04-01

Full Text Available Permanently unsolved world food insecurity problem makes the international community search for solutions. One of the used methods is international food aid directed to developing countries. Long term analyses of the food aid flows allow to identify some tendencies that show: increase of emergency food aid and decrease of direct transfer. These tendencies also apply to the two biggest food donors i.e. the USA and the EU. The noticeable directions of changes are based on the international community initiatives, on which the national regulation are formed later.

Anomalous directional behaviour of the real parts of the induction arrows in the Eastern Alps: tectonic and palaeogeographic implications

Directory of Open Access Journals (Sweden)

P. A. Schnegg

2001-06-01

Full Text Available The electromagnetic induction pattern in the Eastern Alps is characterised by a (continuous large-scale zone on which the real parts of the induction arrows show anomalous directional behaviour. This zone extends from the Penninic Domain of Eastern Switzerland (Graubünden probably into the Carpathian ranges. A coarse mesh of a Magnetotelluric (MT and Geomagnetic Deep Sounding (GDS station in the Alps of Graubünden and Valais (Western Switzerland indicates that this electromagnetic anomaly is restricted to the Mesozoic sediments of the North Penninic Bündnerschiefer-facies that begins in Eastern Switzerland and extends towards the east beneath Austroalpine, South Penninic and Southalpine units. Striking similarities in position and arrangement between this zone and the magnetic signature in the Eastern Alps are found. The analysis of the GDS data with the method of the Hypothetical Event Analysis (HEA shows that current channelling affects the electromagnetic fields in this zone and causes the anomalous direction of induction arrows. Based on the combined interpretation of GDS data from the Eastern Alps and West Hungary together with our recent data from Switzerland, the following geological implications are discussed: i a spatial decoupling of induction processes from the upper to the lower crust; ii a lower crustal conductive structure caused by the indentation of the Northern Adriatic promontory or terrane; iii the eastward continuation of the Bündnerschiefer-facies at least to the tectonic window of Rechnitz.

ORNL Pre-test Analyses of A Large-scale Experiment in STYLE

International Nuclear Information System (INIS)

Williams, Paul T.; Yin, Shengjun; Klasky, Hilda B.; Bass, Bennett Richard

2011-01-01

Oak Ridge National Laboratory (ORNL) is conducting a series of numerical analyses to simulate a large scale mock-up experiment planned within the European Network for Structural Integrity for Lifetime Management non-RPV Components (STYLE). STYLE is a European cooperative effort to assess the structural integrity of (non-reactor pressure vessel) reactor coolant pressure boundary components relevant to ageing and life-time management and to integrate the knowledge created in the project into mainstream nuclear industry assessment codes. ORNL contributes work-in-kind support to STYLE Work Package 2 (Numerical Analysis/Advanced Tools) and Work Package 3 (Engineering Assessment Methods/LBB Analyses). This paper summarizes the current status of ORNL analyses of the STYLE Mock-Up3 large-scale experiment to simulate and evaluate crack growth in a cladded ferritic pipe. The analyses are being performed in two parts. In the first part, advanced fracture mechanics models are being developed and performed to evaluate several experiment designs taking into account the capabilities of the test facility while satisfying the test objectives. Then these advanced fracture mechanics models will be utilized to simulate the crack growth in the large scale mock-up test. For the second part, the recently developed ORNL SIAM-PFM open-source, cross-platform, probabilistic computational tool will be used to generate an alternative assessment for comparison with the advanced fracture mechanics model results. The SIAM-PFM probabilistic analysis of the Mock-Up3 experiment will utilize fracture modules that are installed into a general probabilistic framework. The probabilistic results of the Mock-Up3 experiment obtained from SIAM-PFM will be compared to those results generated using the deterministic 3D nonlinear finite-element modeling approach. The objective of the probabilistic analysis is to provide uncertainty bounds that will assist in assessing the more detailed 3D finite

Chemical data and statistical analyses from a uranium hydrogeochemical survey of the Rio Ojo Caliente drainage basin, New Mexico. Part I. Water

International Nuclear Information System (INIS)

Wenrich-Verbeek, K.J.; Suits, V.J.

1979-01-01

This report presents the chemical analyses and statistical evaluation of 62 water samples collected in the north-central part of New Mexico near Rio Ojo Caliente. Both spring and surface-water samples were taken throughout the Rio Ojo Caliente drainage basin above and a few miles below the town of La Madera. A high U concentration (15 μg/l) found in the water of the Rio Ojo Caliente near La Madera, Rio Arriba County, New Mexico, during a regional sampling-technique study in August 1975 by the senior author, was investigated further in May 1976 to determine whether stream waters could be effectively used to trace the source of a U anomaly. A detailed study of the tributaries to the Rio Ojo Caliente, involving 29 samples, was conducted during a moderate discharge period, May 1976, so that small tributaries would contain water. This study isolated Canada de la Cueva as the tributary contributing the anomalous U, so that in May 1977, an extremely low discharge period due to the 1977 drought, an additional 33 samples were taken to further define the anomalous area. 6 references, 3 figures, 6 tables

Teacher Interviews, Student Interviews, and Classroom Observations in Combinatorics: Four Analyses

Science.gov (United States)

Caddle, Mary C.

2012-01-01

This research consists of teacher interviews, student interviews, and classroom observations, all based around the mathematical content area of combinatorics. Combinatorics is a part of discrete mathematics concerning the ordering and grouping of distinct elements. The data are used in four separate analyses. The first provides evidence that…

Electron microscopy analyses and electrical properties of the layered Bi2WO6 phase

International Nuclear Information System (INIS)

Taoufyq, A.; Ait Ahsaine, H.; Patout, L.; Benlhachemi, A.; Ezahri, M.

2013-01-01

The bismuth tungstate Bi 2 WO 6 was synthesized using a classical coprecipitation method followed by a calcination process at different temperatures. The samples were characterized by X-ray diffraction, simultaneous thermogravimetry and differential thermal analysis (TGA/DTA), scanning and transmission electron microscopy (SEM, TEM) analyses. The Rietveld analysis and electron diffraction clearly confirmed the Pca2 1 non centrosymmetric space group previously proposed for this phase. The layers Bi 2 O 2 2+ and WO 4 2− have been directly evidenced from the HRTEM images. The electrical properties of Bi 2 WO 6 compacted pellets systems were determined from electrical impedance spectrometry (EIS) and direct current (DC) analyses, under air and argon, between 350 and 700 °C. The direct current analyses showed that the conduction observed from EIS analyses was mainly ionic in this temperature range, with a small electronic contribution. Electrical change above the transition temperature of 660 °C is observed under air and argon atmospheres. The strong conductivity increase observed under argon is interpreted in terms of formation of additional oxygen vacancies coupled with electron conduction. - Graphical abstract: High resolution transmission electron microscopy: inverse fast Fourier transform giving the layered structure of the Bi 2 WO 6 phase, with a representation of the cell dimensions (b and c vectors). The Bi 2 O 2 2+ and WO 4 2− sandwiches are visible in the IFFT image. - Highlights: • Using transmission electron microscopy, we visualize the layered structure of Bi 2 WO 6 . • Electrical analyses under argon gas show some increase in conductivity. • The phase transition at 660 °C is evidenced from electrical modification

New directions in analyses of parenting contributions to children's acquisition of values.

Science.gov (United States)

Grusec, J E; Goodnow, J J; Kuczynski, L

2000-01-01

Traditional theories of how children acquire values or standards of behavior have emphasized the importance of specific parenting techniques or styles and have acknowledged the importance of a responsive parent-child relationship, but they have failed to differentiate among forms of responsiveness, have stressed internalization of values as the desired outcome, and have limited their scope to a small set of parenting strategies or methods. This paper outlines new directions for research. It acknowledges the central importance of parents and argues for research that (1) demonstrates that parental understanding of a particular child's characteristics and situation rather than use of specific strategies or styles is the mark of effective parenting; (2) traces the differential impact of varieties of parent responsiveness; (3) assesses the conditions surrounding the fact that parents have goals other than internalization when socializing their children, and evaluates the impact of that fact; and (4) considers a wider range of parenting strategies.

Analyse de la sensibilité aux paramètres gazoles d'un moteur diesel d'automobile à injection directe Small Direct Injection Diesel Engine Sensitivity to the Diesel Fuel Characteristics

Directory of Open Access Journals (Sweden)

Montagne X.

2006-12-01

Full Text Available L'étude présentée a été réalisée dans le cadre du GMCL (Groupement Moteur Carburant Lubrifiant, organisme qui réunit des constructeurs d'automobiles, des raffineurs et des additiveurs, avec l'objectif d'examiner la sensibilité d'un moteur Diesel à injection directe d'automobile aux paramètres du gazole. Les partenaires de cette étude sont Elf, IFP, Octel, PSA, Renault et Total. Parmi les solutions technologiques permettant de disposer de convertisseurs d'énergie assurant de faibles niveaux d'émissions de polluants et de consommation, le moteur Diesel se place naturellement en bonne position. Dans ce contexte, on enregistre aujourd'hui l'émergence du moteur Diesel à injection directe pour les véhicules légers en raison de ses performances, notamment en regard de la consommation. Toutefois, cette technologie nécessite une technique d'injection performante, associée à la gestion électronique, demande de l'EGR et un catalyseur d'oxydation afin de régler les problèmes d'émissions polluantes et sonores. Il est donc de première importance de cerner avec précision la sensibilité du moteur Diesel à injection directe aux paramètres carburants afin de tirer le meilleur profit de cette technologie. À partir d'un ensemble de gazoles formulés pour faire varier la composition chimique, l'indice de cétane et la densité, un moteur Audi à injection directe de type 1Z a été testé au banc, dans des conditions standard de réglage (avance à l'injection et taux de gaz recyclés. Cet ensemble de résultats a ainsi permis de démontrer que l'accroissement de l'indice de cétane, la réduction de la densité et de la teneur en polyaromatiques ont une influence positive sensible sur les émissions de CO, d'hydrocarbures imbrûlés, des VOF. En ce qui concerne les émissions de particules, l'indice de cétane semble avoir une influence négative sur la fraction sèche dans certaines conditions. De plus, il apparaît que les

ANALYSE RIGOUREUSE D’IRIS METALLIQUES EPAIS ET LEUR APPLICATION DANS LES FILTRES A CAVITES RECTANGULAIRES DIRECTEMENT COUPLEES

Directory of Open Access Journals (Sweden)

M BELMEGUENAI

2000-12-01

Full Text Available Une technique générale, basée sur l’analyse modale, est utilisée pour la modélisation de discontinuités et de filtres en guides d’ondes rectangulaires. Dans notre étude où l’épaisseur de l’obstacle métallique (iris épais est prise en compte, nous déterminons d’abord la matrice de diffraction de l’iris par utilisation de l’analyse en modes symétriques et asymétriques, puis en considérant le principe d’association de quadripôles en cascade, nous obtenons la réponse du filtre. Nos différents résultats sont comparés avec ceux publiés dans la littérature.

Monte Carlo modeling and analyses of YALINA-booster subcritical assembly part 1: analytical models and main neutronics parameters

International Nuclear Information System (INIS)

Talamo, A.; Gohar, M. Y. A.; Nuclear Engineering Division

2008-01-01

This study was carried out to model and analyze the YALINA-Booster facility, of the Joint Institute for Power and Nuclear Research of Belarus, with the long term objective of advancing the utilization of accelerator driven systems for the incineration of nuclear waste. The YALINA-Booster facility is a subcritical assembly, driven by an external neutron source, which has been constructed to study the neutron physics and to develop and refine methodologies to control the operation of accelerator driven systems. The external neutron source consists of Californium-252 spontaneous fission neutrons, 2.45 MeV neutrons from Deuterium-Deuterium reactions, or 14.1 MeV neutrons from Deuterium-Tritium reactions. In the latter two cases a deuteron beam is used to generate the neutrons. This study is a part of the collaborative activity between Argonne National Laboratory (ANL) of USA and the Joint Institute for Power and Nuclear Research of Belarus. In addition, the International Atomic Energy Agency (IAEA) has a coordinated research project benchmarking and comparing the results of different numerical codes with the experimental data available from the YALINA-Booster facility and ANL has a leading role coordinating the IAEA activity. The YALINA-Booster facility has been modeled according to the benchmark specifications defined for the IAEA activity without any geometrical homogenization using the Monte Carlo codes MONK and MCNP/MCNPX/MCB. The MONK model perfectly matches the MCNP one. The computational analyses have been extended through the MCB code, which is an extension of the MCNP code with burnup capability because of its additional feature for analyzing source driven multiplying assemblies. The main neutronics parameters of the YALINA-Booster facility were calculated using these computer codes with different nuclear data libraries based on ENDF/B-VI-0, -6, JEF-2.2, and JEF-3.1

Monte Carlo modeling and analyses of YALINA-booster subcritical assembly part 1: analytical models and main neutronics parameters.

Energy Technology Data Exchange (ETDEWEB)

Talamo, A.; Gohar, M. Y. A.; Nuclear Engineering Division

2008-09-11

This study was carried out to model and analyze the YALINA-Booster facility, of the Joint Institute for Power and Nuclear Research of Belarus, with the long term objective of advancing the utilization of accelerator driven systems for the incineration of nuclear waste. The YALINA-Booster facility is a subcritical assembly, driven by an external neutron source, which has been constructed to study the neutron physics and to develop and refine methodologies to control the operation of accelerator driven systems. The external neutron source consists of Californium-252 spontaneous fission neutrons, 2.45 MeV neutrons from Deuterium-Deuterium reactions, or 14.1 MeV neutrons from Deuterium-Tritium reactions. In the latter two cases a deuteron beam is used to generate the neutrons. This study is a part of the collaborative activity between Argonne National Laboratory (ANL) of USA and the Joint Institute for Power and Nuclear Research of Belarus. In addition, the International Atomic Energy Agency (IAEA) has a coordinated research project benchmarking and comparing the results of different numerical codes with the experimental data available from the YALINA-Booster facility and ANL has a leading role coordinating the IAEA activity. The YALINA-Booster facility has been modeled according to the benchmark specifications defined for the IAEA activity without any geometrical homogenization using the Monte Carlo codes MONK and MCNP/MCNPX/MCB. The MONK model perfectly matches the MCNP one. The computational analyses have been extended through the MCB code, which is an extension of the MCNP code with burnup capability because of its additional feature for analyzing source driven multiplying assemblies. The main neutronics parameters of the YALINA-Booster facility were calculated using these computer codes with different nuclear data libraries based on ENDF/B-VI-0, -6, JEF-2.2, and JEF-3.1.

Contingent Commitments: Bringing Part-Time Faculty into Focus. Methodology Supplement

Science.gov (United States)

Center for Community College Student Engagement, 2014

2014-01-01

Center reporting prior to 2013 focused primarily on descriptive statistics (frequencies and means) of student and faculty behaviors. The goal of the analyses reported here and in "Contingent Commitments: Bringing Part-Time Faculty into Focus" is to understand the engagement of part-time or contingent faculty in various activities that…

A model for emergency department end-of-life communications after acute devastating events--part I: decision-making capacity, surrogates, and advance directives.

Science.gov (United States)

Limehouse, Walter E; Feeser, V Ramana; Bookman, Kelly J; Derse, Arthur

2012-09-01

Making decisions for a patient affected by sudden devastating illness or injury traumatizes a patient's family and loved ones. Even in the absence of an emergency, surrogates making end-of-life treatment decisions may experience negative emotional effects. Helping surrogates with these end-of-life decisions under emergent conditions requires the emergency physician (EP) to be clear, making medical recommendations with sensitivity. This model for emergency department (ED) end-of-life communications after acute devastating events comprises the following steps: 1) determine the patient's decision-making capacity; 2) identify the legal surrogate; 3) elicit patient values as expressed in completed advance directives; 4) determine patient/surrogate understanding of the life-limiting event and expectant treatment goals; 5) convey physician understanding of the event, including prognosis, treatment options, and recommendation; 6) share decisions regarding withdrawing or withholding of resuscitative efforts, using available resources and considering options for organ donation; and 7) revise treatment goals as needed. Emergency physicians should break bad news compassionately, yet sufficiently, so that surrogate and family understand both the gravity of the situation and the lack of long-term benefit of continued life-sustaining interventions. EPs should also help the surrogate and family understand that palliative care addresses comfort needs of the patient including adequate treatment for pain, dyspnea, or anxiety. Part I of this communications model reviews determination of decision-making capacity, surrogacy laws, and advance directives, including legal definitions and application of these steps; Part II (which will appear in a future issue of AEM) covers communication moving from resuscitative to end-of-life and palliative treatment. EPs should recognize acute devastating illness or injuries, when appropriate, as opportunities to initiate end-of-life discussions and to

Computer Learner Corpora: Analysing Interlanguage Errors in Synchronous and Asynchronous Communication

Science.gov (United States)

MacDonald, Penny; Garcia-Carbonell, Amparo; Carot, Sierra, Jose Miguel

2013-01-01

This study focuses on the computer-aided analysis of interlanguage errors made by the participants in the telematic simulation IDEELS (Intercultural Dynamics in European Education through on-Line Simulation). The synchronous and asynchronous communication analysed was part of the MiLC Corpus, a multilingual learner corpus of texts written by…

Conducting qualitative research in mental health: Thematic and content analyses.

Science.gov (United States)

Crowe, Marie; Inder, Maree; Porter, Richard

2015-07-01

The objective of this paper is to describe two methods of qualitative analysis - thematic analysis and content analysis - and to examine their use in a mental health context. A description of the processes of thematic analysis and content analysis is provided. These processes are then illustrated by conducting two analyses of the same qualitative data. Transcripts of qualitative interviews are analysed using each method to illustrate these processes. The illustration of the processes highlights the different outcomes from the same set of data. Thematic and content analyses are qualitative methods that serve different research purposes. Thematic analysis provides an interpretation of participants' meanings, while content analysis is a direct representation of participants' responses. These methods provide two ways of understanding meanings and experiences and provide important knowledge in a mental health context. © The Royal Australian and New Zealand College of Psychiatrists 2015.

Sensitivity in risk analyses with uncertain numbers.

Energy Technology Data Exchange (ETDEWEB)

Tucker, W. Troy; Ferson, Scott

2006-06-01

Sensitivity analysis is a study of how changes in the inputs to a model influence the results of the model. Many techniques have recently been proposed for use when the model is probabilistic. This report considers the related problem of sensitivity analysis when the model includes uncertain numbers that can involve both aleatory and epistemic uncertainty and the method of calculation is Dempster-Shafer evidence theory or probability bounds analysis. Some traditional methods for sensitivity analysis generalize directly for use with uncertain numbers, but, in some respects, sensitivity analysis for these analyses differs from traditional deterministic or probabilistic sensitivity analyses. A case study of a dike reliability assessment illustrates several methods of sensitivity analysis, including traditional probabilistic assessment, local derivatives, and a ''pinching'' strategy that hypothetically reduces the epistemic uncertainty or aleatory uncertainty, or both, in an input variable to estimate the reduction of uncertainty in the outputs. The prospects for applying the methods to black box models are also considered.

Palaeoecological caracterisation of the mammoth steppe at Final Pleistocene in Central Ukraine from zooarchaeology, stable isotope analyses and direct radiocarbon dating

Science.gov (United States)

Péan, Stéphane; Drucker, Dorothée.; Bocherens, Hervé; Haesaerts, Paul; Valladas, Hélène; Stupak, Dmytro; Nuzhnyi, Dmytro

2010-05-01

In the Central Ukraine area of the Middle Dnipro Basin, including the Desna river valley, there are exceptional Upper Palaeolithic open air sites with mammoth bone dwelling structures. Mezhyrich is one of these settlements, which are attributed to the Epigravettian cultural facies and occurred in a periglacial environment, during Oxygen Isotope Stage (OIS) 2. Mammoth bone buildings are surrounded by pits, which are filled with archaeological material (tools, hunting weapons, ivory and bone ornaments) and bones of mammoth and other large mammals such as hare, fox, wolf, horse. A new site Buzhanka 2 has yielded a pit which could be related to an expected dwelling structure. These Final Pleistocene sites are particularly appropriate to shed new light upon the relation between man and environment at the time of the mammoth steppe disappearance. Multidisciplinar studies have been carried on, to cross results from zooarchaeology of the pit contents, carbon and nitrogen stable isotope (13C and 15N) analyses of bone collagen, direct 14C dates on mammal bones and microstratigraphic analyses of the loessic sediment. With almost twenty 14C dates available, from mammoth and wolf bones and from charcoals, Mezhyrich is the best dated Epigravettian mammoth bone dwelling site: around 14 500 years BP. Mammoth treatment is zooarchaeologically evidenced in Buzhanka 2, but limited excavated areas do not allow to interpret their procurement yet. In Mezhyrich, consumption of mammoth meat is evidenced from the pit contents, coming from a few juveniles and young adults, probably hunted. The bones used in the dwelling structure no. 4, which are attributed to at least 37 individuals, have two different origins: mostly isolated elements gathered from other deposits, natural accumulations or previous kill sites; a few skeletal portions in anatomical position taken from at least one quite freshly dead mammoth body, for instance a hunted individual. From the stable isotope analyses, it appears

Neutronic analyses and tools development efforts in the European DEMO programme

Energy Technology Data Exchange (ETDEWEB)

Fischer, U., E-mail: ulrich.fischer@kit.edu [Association KIT-Euratom, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Bachmann, C. [European Fusion Development Agreement (EFDA), Garching (Germany); Bienkowska, B. [Association IPPLM-Euratom, IPPLM Warsaw/INP Krakow (Poland); Catalan, J.P. [Universidad Nacional de Educación a Distancia (UNED), Madrid (Spain); Drozdowicz, K.; Dworak, D. [Association IPPLM-Euratom, IPPLM Warsaw/INP Krakow (Poland); Leichtle, D. [Association KIT-Euratom, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Fusion for Energy (F4E), Barcelona (Spain); Lengar, I. [MESCS-JSI, Ljubljana (Slovenia); Jaboulay, J.-C. [CEA, DEN, Saclay, DM2S, SERMA, F-91191 Gif-sur-Yvette (France); Lu, L. [Association KIT-Euratom, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Moro, F. [Associazione ENEA-Euratom, ENEA Fusion Division, Frascati (Italy); Mota, F. [Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (CIEMAT), Madrid (Spain); Sanz, J. [Universidad Nacional de Educación a Distancia (UNED), Madrid (Spain); Szieberth, M. [Budapest University of Technology and Economics (BME), Budapest (Hungary); Palermo, I. [Centro de Investigaciones Energéticas, Medioambientales y Tecnológicas (CIEMAT), Madrid (Spain); Pampin, R. [Fusion for Energy (F4E), Barcelona (Spain); Porton, M. [Euratom/CCFE Fusion Association, Culham Science Centre for Fusion Energy (CCFE), Culham (United Kingdom); Pereslavtsev, P. [Association KIT-Euratom, Karlsruhe Institute of Technology (KIT), Karlsruhe (Germany); Ogando, F. [Universidad Nacional de Educación a Distancia (UNED), Madrid (Spain); Rovni, I. [Budapest University of Technology and Economics (BME), Budapest (Hungary); and others

2014-10-15

Highlights: •Evaluation of neutronic tools for application to DEMO nuclear analyses. •Generation of a DEMO model for nuclear analyses based on MC calculations. •Nuclear analyses of the DEMO reactor equipped with a HCLL-type blanket. -- Abstract: The European Fusion Development Agreement (EFDA) recently launched a programme on Power Plant Physics and Technology (PPPT) with the aim to develop a conceptual design of a fusion demonstration reactor (DEMO) addressing key technology and physics issues. A dedicated part of the PPPT programme is devoted to the neutronics which, among others, has to define and verify requirements and boundary conditions for the DEMO systems. The quality of the provided data depends on the capabilities and the reliability of the computational tools. Accordingly, the PPPT activities in the area of neutronics include both DEMO nuclear analyses and development efforts on neutronic tools including their verification and validation. This paper reports on first neutronics studies performed for DEMO, and on the evaluation and further development of neutronic tools.

Neutronic analyses and tools development efforts in the European DEMO programme

International Nuclear Information System (INIS)

Fischer, U.; Bachmann, C.; Bienkowska, B.; Catalan, J.P.; Drozdowicz, K.; Dworak, D.; Leichtle, D.; Lengar, I.; Jaboulay, J.-C.; Lu, L.; Moro, F.; Mota, F.; Sanz, J.; Szieberth, M.; Palermo, I.; Pampin, R.; Porton, M.; Pereslavtsev, P.; Ogando, F.; Rovni, I.

2014-01-01

Highlights: •Evaluation of neutronic tools for application to DEMO nuclear analyses. •Generation of a DEMO model for nuclear analyses based on MC calculations. •Nuclear analyses of the DEMO reactor equipped with a HCLL-type blanket. -- Abstract: The European Fusion Development Agreement (EFDA) recently launched a programme on Power Plant Physics and Technology (PPPT) with the aim to develop a conceptual design of a fusion demonstration reactor (DEMO) addressing key technology and physics issues. A dedicated part of the PPPT programme is devoted to the neutronics which, among others, has to define and verify requirements and boundary conditions for the DEMO systems. The quality of the provided data depends on the capabilities and the reliability of the computational tools. Accordingly, the PPPT activities in the area of neutronics include both DEMO nuclear analyses and development efforts on neutronic tools including their verification and validation. This paper reports on first neutronics studies performed for DEMO, and on the evaluation and further development of neutronic tools

The Welfare Effects of Involuntary Part-time Work

DEFF Research Database (Denmark)

Borowczyk-Martins, Daniel; Lalé, Etienne

2018-01-01

Employed individuals in the USA are increasingly more likely to move to involuntarily part-time work than to unemployment. Spells of involuntary part-time work are different from unemployment spells: a full-time worker who takes on a part-time job suffers an earnings loss while remaining employed......, and is unlikely to receive income compensation from publicly provided insurance programmes. We analyse these differences through the lens of an incomplete-market, job-search model featuring unemployment risk alongside an additional risk of involuntary part-time employment. A calibration of the model consistent...... with US institutions and labour market dynamics shows that involuntary part-time work generates lower welfare losses relative to unemployment. This finding relies critically on the much higher probability to return to full-time employment from part-time work. We interpret it as a premium in access to full...

BWR core melt progression phenomena: Experimental analyses

International Nuclear Information System (INIS)

Ott, L.J.

1992-01-01

In the BWR Core Melt in Progression Phenomena Program, experimental results concerning severe fuel damage and core melt progression in BWR core geometry are used to evaluate existing models of the governing phenomena. These include control blade eutectic liquefaction and the subsequent relocation and attack on the channel box structure; oxidation heating and hydrogen generation; Zircaloy melting and relocation; and the continuing oxidation of zirconium with metallic blockage formation. Integral data have been obtained from the BWR DF-4 experiment in the ACRR and from BWR tests in the German CORA exreactor fuel-damage test facility. Additional integral data will be obtained from new CORA BWR test, the full-length FLHT-6 BWR test in the NRU test reactor, and the new program of exreactor experiments at Sandia National Laboratories (SNL) on metallic melt relocation and blockage formation. an essential part of this activity is interpretation and use of the results of the BWR tests. The Oak Ridge National Laboratory (ORNL) has developed experiment-specific models for analysis of the BWR experiments; to date, these models have permitted far more precise analyses of the conditions in these experiments than has previously been available. These analyses have provided a basis for more accurate interpretation of the phenomena that the experiments are intended to investigate. The results of posttest analyses of BWR experiments are discussed and significant findings from these analyses are explained. The ORNL control blade/canister models with materials interaction, relocation and blockage models are currently being implemented in SCDAP/RELAP5 as an optional structural component

EEG analyses with SOBI.

Energy Technology Data Exchange (ETDEWEB)

Glickman, Matthew R.; Tang, Akaysha (University of New Mexico, Albuquerque, NM)

2009-02-01

The motivating vision behind Sandia's MENTOR/PAL LDRD project has been that of systems which use real-time psychophysiological data to support and enhance human performance, both individually and of groups. Relevant and significant psychophysiological data being a necessary prerequisite to such systems, this LDRD has focused on identifying and refining such signals. The project has focused in particular on EEG (electroencephalogram) data as a promising candidate signal because it (potentially) provides a broad window on brain activity with relatively low cost and logistical constraints. We report here on two analyses performed on EEG data collected in this project using the SOBI (Second Order Blind Identification) algorithm to identify two independent sources of brain activity: one in the frontal lobe and one in the occipital. The first study looks at directional influences between the two components, while the second study looks at inferring gender based upon the frontal component.

Geological and production analyses focused on exploration of the eastern part of the Cerro Prieto geothermal field, BC; Analisis geologico-productivo enfocado a la exploracion de la parte oriental del campo geotermico de Cerro Prieto, BC

Energy Technology Data Exchange (ETDEWEB)

Aguilar Dumas, Alvaro [Comision Federal de Electricidad, Residencia General de Cerro Prieto, B.C (Mexico)]. E-mail: alvaro.aguilar@cfe.gob.mx

2008-01-15

The eastern part of the Cerro Prieto geothermal field (CGCP), known as Poligono Nuevo Leon, is an area with proven geothermal resources, as confirmed by seven directional wells located toward the east and by vertical well M-200 located inside the polygon. Well M-200 was drilled in 1984 and has produced about 4 million tons of steam to date. It is integrated into the CP-2 sector, producing 68 t/h of steam. Presently the eastern part of CGCP, representing 25% of the total field area, is producing over half of the steam for the entire field. In the last few years, the steam has come only after increasing the number of production wells located in the eastern zone of CGCP (Rodriguez, 2006), where pressure, enthalpy and temperature conditions are better than in other parts of the field. However in the long term it will be necessary to incorporate Poligono Nuevo Leon into the productive area to expand the productive life of CGCP. This paper includes a geological analysis, plus models for steam production, temperature and enthalpy for Poligono Nuevo Leon. [Spanish] La parte oriental del Campo Geotermico de Cerro Prieto (CGCP), conocida como Poligono Nuevo Leon, representa una area potencial con recursos geotermicos comprobados, lo que demuestran siete pozos direccionales que se han perforado hacia el este, asi como el pozo vertical M-200, localizado dentro del poligono. El pozo M-200 se perforo en 1984 y ha producido a la fecha alrededor de 4 millones de toneladas de vapor, estando integrado al sector CP-2 una produccion de 68 t/h de vapor. Actualmente la parte oriental del CGCP, que representa el 25% del area total del campo, produce mas de la mitad del total de vapor del campo. El suministro de vapor en los ultimos anos se ha logrado cubrir aumentando el numero de pozos en operacion localizados en la zona oriente del CGCP (Rodriguez, 2006), ya que es aqui donde hay condiciones de presion, entalpia y temperatura del yacimiento que son mejores que en otras areas del campo

Spin and Wind Directions I: Identifying Entanglement in Nature and Cognition.

Science.gov (United States)

Aerts, Diederik; Arguëlles, Jonito Aerts; Beltran, Lester; Geriente, Suzette; Sassoli de Bianchi, Massimiliano; Sozzo, Sandro; Veloz, Tomas

2018-01-01

We present a cognitive psychology experiment where participants were asked to select pairs of spatial directions that they considered to be the best example of Two different wind directions . Data are shown to violate the CHSH version of Bell's inequality with the same magnitude as in typical Bell-test experiments with entangled spins. Wind directions thus appear to be conceptual entities connected through meaning, in human cognition, in a similar way as spins appear to be entangled in experiments conducted in physics laboratories. This is the first part of a two-part article. In the second part (Aerts et al. in Found Sci, 2017) we present a symmetrized version of the same experiment for which we provide a quantum modeling of the collected data in Hilbert space.

Direct Democracy in Local Politics in Denmark

DEFF Research Database (Denmark)

Svensson, Palle

2007-01-01

Elements of  direct democracy at the local level does exist in Denmark, but it is little known, because no formal rules regulate this aspect of political life, because results from popular initiatives and referendums are not recorded in official statistics, and because few systematic analyses have...... been published. This paper, accordingly, has an explorative nature and asks two basic questions: What is the current state of direct democracy at the local level in Denmark, and what are the prospects for a further development of direct democracy at the local level in Denmark? The paper is based...

The health economics of ankle and foot sprains and fractures: A systematic review of English-language published papers. Part 2: The direct and indirect costs of injury.

Science.gov (United States)

Bielska, Iwona A; Wang, Xiang; Lee, Raymond; Johnson, Ana P

2017-07-20

Ankle and foot sprains and fractures are prevalent injuries, which may result in substantial physical and economic consequences for the patient and place a financial burden on the health care system. Therefore, the objectives of this paper are to examine the direct and indirect costs of treating ankle and foot injuries (sprains, dislocations, fractures), as well as to provide an overview of the outcomes of full economic analyses of different treatment strategies. A systematic review was carried out among seven databases to identify English language publications on the health economics of ankle and foot injury treatment published between 1980 and 2014. The direct and indirect costs were abstracted by two independent reviewers. All costs were adjusted for inflation and reported in 2016 US dollars (USD). Among 2047 identified studies, 32 were selected for analysis. The direct costs of ankle sprain management ranged from $292 to $2268 per patient (2016 USD), depending on the injury severity and treatment strategy. The direct costs of managing ankle fractures were higher ($1908-$19,555). Foot fracture treatment had similar direct costs ranging from $998 to $21,801. The economic evaluations were conducted from the societal or payer's perspectives. The costs of treating ankle and foot sprains and fractures varied among the studies, mostly due to differences in injury type and study characteristics, which impacted the ability of directly comparing the financial burden of treatment. Nonetheless, the review showed that the costs experienced by the patient and the health care system increased with injury complexity. Copyright © 2017 Elsevier Ltd. All rights reserved.

Directional outlyingness for multivariate functional data

KAUST Repository

Dai, Wenlin

2018-04-07

The direction of outlyingness is crucial to describing the centrality of multivariate functional data. Motivated by this idea, classical depth is generalized to directional outlyingness for functional data. Theoretical properties of functional directional outlyingness are investigated and the total outlyingness can be naturally decomposed into two parts: magnitude outlyingness and shape outlyingness which represent the centrality of a curve for magnitude and shape, respectively. This decomposition serves as a visualization tool for the centrality of curves. Furthermore, an outlier detection procedure is proposed based on functional directional outlyingness. This criterion applies to both univariate and multivariate curves and simulation studies show that it outperforms competing methods. Weather and electrocardiogram data demonstrate the practical application of our proposed framework.

29 CFR 541.703 - Directly and closely related.

Science.gov (United States)

2010-07-01

... transit, is performing exempt work. If the employee also spends part of the day taking telephone orders... employee's exempt work cannot be performed properly. Work “directly and closely related” to the performance... related to exempt work: (1) Keeping time, production or sales records for subordinates is work directly...

Empirical Psycho-Aesthetics and Her Sisters: Substantive and Methodological Issues--Part I

Science.gov (United States)

Konecni, Vladimir J.

2012-01-01

Empirical psycho-aesthetics--an interdisciplinary field with a long tradition--is approached in this two-part article from two directions, in each case with several objectives. Part I, in this issue of "JAE", is devoted to the first direction, which is mainly definitional and organizational: the objectives are to present an outline of the field's…

Athletic groin pain (part 2): a prospective cohort study on the biomechanical evaluation of change of direction identifies three clusters of movement patterns

Science.gov (United States)

Franklyn-Miller, A; Richter, C; King, E; Gore, S; Moran, K; Strike, S; Falvey, E C

2017-01-01

Background Athletic groin pain (AGP) is prevalent in sports involving repeated accelerations, decelerations, kicking and change-of-direction movements. Clinical and radiological examinations lack the ability to assess pathomechanics of AGP, but three-dimensional biomechanical movement analysis may be an important innovation. Aim The primary aim was to describe and analyse movements used by patients with AGP during a maximum effort change-of-direction task. The secondary aim was to determine if specific anatomical diagnoses were related to a distinct movement strategy. Methods 322 athletes with a current symptom of chronic AGP participated. Structured and standardised clinical assessments and radiological examinations were performed on all participants. Additionally, each participant performed multiple repetitions of a planned maximum effort change-of-direction task during which whole body kinematics were recorded. Kinematic and kinetic data were examined using continuous waveform analysis techniques in combination with a subgroup design that used gap statistic and hierarchical clustering. Results Three subgroups (clusters) were identified. Kinematic and kinetic measures of the clusters differed strongly in patterns observed in thorax, pelvis, hip, knee and ankle. Cluster 1 (40%) was characterised by increased ankle eversion, external rotation and knee internal rotation and greater knee work. Cluster 2 (15%) was characterised by increased hip flexion, pelvis contralateral drop, thorax tilt and increased hip work. Cluster 3 (45%) was characterised by high ankle dorsiflexion, thorax contralateral drop, ankle work and prolonged ground contact time. No correlation was observed between movement clusters and clinically palpated location of the participant's pain. Conclusions We identified three distinct movement strategies among athletes with long-standing groin pain during a maximum effort change-of-direction task These movement strategies were not related to clinical

Direct Reactions

Energy Technology Data Exchange (ETDEWEB)

Austern, N. [University of Pittsburgh, Pittsburgh, PA (United States)

1963-01-15

In order to give a unified presentation of one point of view, these lectures are devoted only to a detailed development of the standard theories of direct reactions, starting from basic principles. Discussion is given of the present status of the theories, of the techniques used for practical calculation, and of possible future developments. The direct interaction (DI) aspects of a reaction are those which involve only a few of the many degrees of freedom of a nucleus. In fact the minimum number of degrees of freedom which must be involved in a reaction are those required to describe the initial and final channels, and DI studies typically consider these degrees of freedom and no others. Because of this simplicity DI theories may be worked out in painstaking detail. DI processes concern only part of the wave function for a problem. The other part involves complicated excitations of many degrees of freedom, and gives the compound nucleus (CN) effects. While it is extremely interesting to learn how to separate DI and CN effects in an orderly manner, if they are both present in a reaction, no suitable method has yet been found. Instead, current work stresses the kinds of reactions and the kinds of final states in which DI effects dominate and in which CN effects may almost be forgotten. The DI cross-sections which are studied are often extremely large, comparable to elastic scattering cross-sections. (author)

Neoliberalism in education: Five images of critical analyses

Directory of Open Access Journals (Sweden)

Branislav Pupala

2011-03-01

Full Text Available The survey study brings information about the way that educational researchcopes with neoliberalism as a generalized form of social government in the currentwestern culture. It shows that neoliberalism is considered as a universal scope of otherchanges in the basic segments of education and those theoretical and critical analyses ofthis phenomenon represent an important part of production in the area of educationalresearch. It emphasizes the contribution of formation and development of the socalledgovernmental studies for comprehension of mechanisms and consequences ofneoliberal government of the society and shows how way the methodology of thesestudies helps to identify neoliberal strategies used in the regulation of social subjectsby education. There are five selected segments of critical analyses elaborated (fromthe concept of a lifelong learning, through preschool and university education to theeducation of teachers and PISA project that obviously show ideological and theoreticalcohesiveness of the education analysis through the scope of neoliberal governmentality.

Design and Exploitation Problems of Drill String in Directional Drilling

Directory of Open Access Journals (Sweden)

Bednarz Stanislaw

2004-09-01

Full Text Available Drill string design for directional drilling requires accounting for a number of factors. First, types and expected values of loads should be determined. Then, elements of the drill string should be so selected as to enable realization of the plan at specified loads. Some of additional factors, e. g. purchase, exploitation cost, geological conditions in the bore-hole, washing of the bore-hole, stability, trajectory, rig parameters, accuracy of gauges, pumps parameters remain in conflict. Drill pipes are made of rolled pipes, upset and welded with tool joints to 9,5 m long; the shorter ones can be made of hot forged rods. Exploitation requirements, being a result of practical experience supported by theoretical and laboratory analyses should be a part of syllabuses of technical staff educational programs. Apart from designing the string, it is also vital to lower the risk of a drilling failure. The significance of these aspects seems to be unquestionable.

Report of analyses for light hydrocarbons in ground water

International Nuclear Information System (INIS)

Dromgoole, E.L.

1982-04-01

This report contains on microfiche the results of analyses for methane, ethane, propane, and butane in 11,659 ground water samples collected in 47 western and three eastern 1 0 x 2 0 quadrangles of the National Topographic Map Series (Figures 1 and 2), along with a brief description of the analytical technique used and some simple, descriptive statistics. The ground water samples were collected as part of the National Uranium Resource Evaluation (NURE) hydrogeochemical and stream sediment reconnaissance. Further information on the ground water samples can be obtained by consulting the NURE data reports for the individual quadrangles. This information includes (1) measurements characterizing water samples (pH, conductivity, and alkalinity), (2) physical measurements, where applicable (water temperature, well description, and other measurements), and (3) elemental analyses

Assessment of Surface Water Quality in the Malaysian Coastal Waters by Using Multivariate Analyses

International Nuclear Information System (INIS)

Yap, C.K.; Chee, M.W.; Shamarina, S.; Edward, F.B.; Chew, W.; Tan, S.G.

2011-01-01

Coastal water samples were collected from 20 sampling sites in the southern part of Peninsular Malaysia. Seven physico-chemical parameters were measured directly in-situ while water samples were collected and analysed for 6 dissolved trace metal concentrations. The surface water (0-20 cm) physico-chemical parameters including temperature, salinity, dissolved oxygen (DO), pH, total dissolved solids (TDS), specific conductance (SpC) and turbidity while the dissolved trace metals were Cd, Cu, Fe, Ni, Pb and Zn. The ranges for the physico-chemical parameters were 28.07-35.6 degree Celsius for temperature, 0.18-32.42 ppt for salinity, 2.20-12.03 mg/ L for DO, 5.50-8.53 for pH, 0.24-31.65 mg/ L for TDS, 368-49452 μS/ cm for SpC and 0-262 NTU for turbidity while the dissolved metals (mg/ L) were 0.013-0.147 for Cd, 0.024-0.143 for Cu, 0.266-2.873 for Fe, 0.027-0.651 for Ni, 0.018-0.377 for Pb and 0.032-0.099 for Zn. Based on multivariate analysis (including correlation, cluster and principal component analyses), the polluted sites were found at Kg. Pasir Puteh and Tg. Kupang while Ni and Pb were identified as two major dissolved metals of high variation in the coastal waters. Therefore, water quality monitoring and control of release of untreated anthropogenic wastes into rivers and coastal waters are strongly needed. (author)

The part-whole perception of emotion.

Science.gov (United States)

Glazer, Trip

2018-02-01

A clever argument purports to show that we can directly perceive the emotions of others: (1) some emotional expressions are parts of the emotions they express; (2) in perceiving a part of something, one can perceive the whole; (3) therefore, in perceiving some emotional expressions, one can perceive the emotions they express. My aim in this paper is to assess the extent to which contemporary theories of emotion support the first premise of this argument. Copyright © 2017 Elsevier Inc. All rights reserved.

Dynamic performance assessment of a residential building-integrated cogeneration system under different boundary conditions. Part II: Environmental and economic analyses

International Nuclear Information System (INIS)

Rosato, Antonio; Sibilio, Sergio; Scorpio, Michelangelo

2014-01-01

Highlights: • A building-integrated micro-cogeneration system was dynamically simulated. • Simulation data were analyzed from both environmental and economic point of views. • The proposed system was compared with a conventional supply system. • The proposed system reduces the environmental impact under heat-led operation. • The proposed system reduces the operating costs whatever the control logic is. - Abstract: This work examines the performance of a residential building-integrated micro-cogeneration system during the winter by means of a whole building simulation software. The cogeneration unit was coupled with a multi-family house composed of three floors, compliant with the transmittance values of both walls and windows suggested by the Italian Law; a stratified combined tank for both heating purposes and domestic hot water production was also used for storing heat. Simulations were performed considering the transient nature of the building and occupant driven loads as well as the part-load characteristics of the cogeneration unit. This system was described in detail and analyzed from an energy point of view in the companion paper. In this paper the simulation results were evaluated in terms of both carbon dioxide equivalent emissions and operating costs; detailed analyses were performed in order to estimate the influence of the most significant boundary conditions on both environmental and economic performance of the proposed system: in particular, three volumes of the hot water storage, four climatic zones corresponding to four Italian cities, two electric demand profiles, as well as two control strategies micro-cogeneration unit were considered. The assessment of environmental impact was performed by using the standard emission factors approach, neglecting the effects of local pollutants. The operating costs due to both natural gas and electric energy consumption were evaluated in detail, whereas both the capital and maintenance costs were

Part-time work, underemployment and gender : worker versus job explanations

OpenAIRE

Kjeldstad, Randi; Nymoen, Erik H.

2009-01-01

The article analyses part-time work, both so-called voluntary and involuntary, in a gender perspective and discusses under what conditions women and men work part-time. The discussion is based on logistic regression models, including human capital, life-course- and household characteristics and job characteristics as independent variables. We use Norwegian Labour Force Survey data. The analysis shows that part-time work is a strongly gendered phenomenon, not only because it occurs much more f...

Hyperspectral Analyses of Wild 2 Grains Using Synchrotron Radiation

Science.gov (United States)

Simionovici, A. S.; Lemelle, L.; Ferroir, T.; Gillet, P.; Borg, J.; Grossemy, F.; Djouadi, Z.; Bleuet, P.; Susini, J.

2006-12-01

This work is part of the Preliminary Examination Team (PET) on Bulk Chemistry investigation of Wild 2 cometary grains brought back to Earth by the NASA Stardust mission [1]. X-rays are among the least destructive yet sensitive micro-probes, capable of analysing minute samples embedded in low density collectors, so methods based on Synchrotron Radiation had access to Stardust samples in priority. The main goal of the PET was to produce a preliminary characterization of the abundance and nature of the elements present in the returned samples [2]. In this phase it was paramount to analyze the grains in-situ, in the aerogel foam of the collectors to record the total mass fragments and avoid extraction risks. We have performed measurements on beamlines ID22/ID21 of the ESRF synchrotron in Grenoble, France, devoted to high/low energy microspectroscopy and recorded results on a collection of 6 keystones. Terminal particles as well as fragmentation tracks in the aerogel were mapped out with micron resolution, recording total mass composition for elements of Z>15 by means of X-ray fluorescence [3], as well as structural information by X-ray diffraction. This allowed the direct identification of the mineralogy of some of the grains. Finally, we recorded the evolution of the charge states of S and Fe as a function of the position in the track by means of micro-Xanes measurements. All these analyses were combined to produce a description of the Wild 2 cometary grains [4], as well as a history of their formation and of the thermal interactions during their slowing down in the aerogel collectors. [1] Brownlee, D. E. et al., LPSC XXXVII, abstract nr. 2286, 2006. [2] G. J. Flynn et al., LPSC XXXVII, abstract nr. 1217, 2006. [3] A. Simionovici, P. Chevallier, Chap. 7, Handbook of Practical X-Ray Fluorescence Analysis, 66-83, Springer, 2006. [4] G. J. Flynn et al., Science, (submitted), 2006.

Comparison Between Conventional Design and Cathode Gas Recirculation Design of a Direct-Syngas Solid Oxide Fuel Cell–Gas Turbine Hybrid Systems Part I: Design Performance

Directory of Open Access Journals (Sweden)

Vahid Azami

2017-06-01

Keywords: Solid oxide fuel cell, Gas turbine, Cathode gas recirculation, Exergy. Article History: Received Feb 23rd 2017; Received in revised form May 26th 2017; Accepted June 1st 2017; Available online How to Cite This Article: Azami, V, and Yari, M. (2017 Comparison between conventional design and cathode gas recirculation design of a direct-syngas solid oxide fuel cell–gas turbine hybrid systems part I: Design performance. International Journal of Renewable Energy Develeopment, 6(2, 127-136. https://doi.org/10.14710/ijred.6.2.127-136

Humidification Dehumidification Spray Column Direct Contact Condenser Part I: Countercurrent Flow

International Nuclear Information System (INIS)

Shouman, L.; Karameldin, A.; Fadel, D.

2015-01-01

Humidification-dehumidification (HDH) is a low grade energy desalination technology. The waste heat from power plant (such NPP) can be used as heat source to preheat water (in evaporator) and air (in condenser) . Hot humid air and cooled spray water in counter current flow with direct contact is theoretically analyzing in the present work. Direct contact spray condenser is studied to provide the effect of various parameters on its performance. A computer programme describing the theoretical model is designed to solve a one-dimensional differential equations by using Rung–Kutta method. The programme predicts the droplet radius, velocity and temperature, besides, the humidity and temperature of air. The results show that, the length of column has great effect on the performance of spray condenser. At column height of 0.762, 2, 5, 10, and 20 m the humidity of the output air decreases by 50%, 72%, 89%, 97%, and 99% respectively. The condensate increases about 35% when the length increase from 5 to 10 m at ΔT = 25°C while increase only 18% at ΔT = 30°C. Also, it is found that, at ΔT = 25°C the condensate decrease from H = 10 to 5 m about 31% and increases from 10 to 20 m about 32%. While these results for ΔT = 25°C are 32% from H = 10 to 5 m and 36% from 10 to 20 m.The increase of both water and air mass fluxes increases the condensate mass flow rate. (author)

Development of ITER 3D neutronics model and nuclear analyses

International Nuclear Information System (INIS)

Zeng, Q.; Zheng, S.; Lu, L.; Li, Y.; Ding, A.; Hu, H.; Wu, Y.

2007-01-01

ITER nuclear analyses rely on the calculations with the three-dimensional (3D) Monte Carlo code e.g. the widely-used MCNP. However, continuous changes in the design of the components require the 3D neutronics model for nuclear analyses should be updated. Nevertheless, the modeling of a complex geometry with MCNP by hand is a very time-consuming task. It is an efficient way to develop CAD-based interface code for automatic conversion from CAD models to MCNP input files. Based on the latest CAD model and the available interface codes, the two approaches of updating 3D nuetronics model have been discussed by ITER IT (International Team): The first is to start with the existing MCNP model 'Brand' and update it through a combination of direct modification of the MCNP input file and generation of models for some components directly from the CAD data; The second is to start from the full CAD model, make the necessary simplifications, and generate the MCNP model by one of the interface codes. MCAM as an advanced CAD-based MCNP interface code developed by FDS Team in China has been successfully applied to update the ITER 3D neutronics model by adopting the above two approaches. The Brand model has been updated to generate portions of the geometry based on the newest CAD model by MCAM. MCAM has also successfully performed conversion to MCNP neutronics model from a full ITER CAD model which is simplified and issued by ITER IT to benchmark the above interface codes. Based on the two updated 3D neutronics models, the related nuclear analyses are performed. This paper presents the status of ITER 3D modeling by using MCAM and its nuclear analyses, as well as a brief introduction of advanced version of MCAM. (authors)

Performance evaluation of directly photovoltaic powered DC PM (direct current permanent magnet) motor – propeller thrust system

International Nuclear Information System (INIS)

Atlam, Ozcan; Kolhe, Mohan

2013-01-01

Photovoltaic (PV) powered directly coupled electro-mechanical system has wide applications (e.g. PV powered cooling fans in green houses, PV water pumping system, solar vehicles). The objective of this work is to analyse the operation of directly PV powered DC PM (direct current permanent magnet) motor – propeller system for selection of motor parameters. The performance of such system mainly depends on the incident solar radiation, operating cell temperature, DC motor and propeller load parameters. It is observed that the operating points of the PV DC PM motor – propeller system matches very closely with the maximum power points (MPPs) of the PV array, if the DC PM motor – propeller parameters have been properly selected. It is found that for a specific application of such type of system, matching of torque–speed operating points with respect to the maximum power points of PV array are very important. It is ascertained through results that the DC PM motor's armature resistance, magnetic field constant, starting current to overcome the starting torque and torque coefficient are the main parameters. In designing a PV powered DC PM motor for a specific application, selection of these parameters are important for maximum utilization of the PV array output. The results of this system are useful for designing of directly PV powered DC PM motor's for aerodynamic applications. - Highlights: • We analyse the performance of directly PV powered DC PM motor – propeller system. • We examine PV electro-mechanical system for selection of DC motor parameters. • Matching of torque–speed curve to maximum power points of PV array is important

Constraining supersymmetric models using Higgs physics, precision observables and direct searches

International Nuclear Information System (INIS)

Zeune, Lisa

2014-08-01

We present various complementary possibilities to exploit experimental measurements in order to test and constrain supersymmetric (SUSY) models. Direct searches for SUSY particles have not resulted in any signal so far, and limits on the SUSY parameter space have been set. Measurements of the properties of the observed Higgs boson at ∝126 GeV as well as of the W boson mass (M W ) can provide valuable indirect constraints, supplementing the ones from direct searches. This thesis is divided into three major parts: In the first part we present the currently most precise prediction for M W in the Minimal Supersymmetric Standard Model (MSSM) with complex parameters and in the Next-to-Minimal Supersymmetric Standard Model (NMSSM). The evaluation includes the full one-loop result and all relevant available higher order corrections of Standard Model (SM) and SUSY type. We perform a detailed scan over the MSSM parameter space, taking into account the latest experimental results, including the observation of a Higgs signal. We find that the current measurements for M W and the top quark mass (m t ) slightly favour a non-zero SUSY contribution. The impact of different SUSY sectors on the prediction of M W as well as the size of the higher-order SUSY corrections are analysed both in the MSSM and the NMSSM. We investigate the genuine NMSSM contribution from the extended Higgs and neutralino sectors and highlight differences between the M W predictions in the two SUSY models. In the second part of the thesis we discuss possible interpretations of the observed Higgs signal in SUSY models. The properties of the observed Higgs boson are compatible with the SM so far, but many other interpretations are also possible. Performing scans over the relevant parts of the MSSM and the NMSSM parameter spaces and applying relevant constraints from Higgs searches, flavour physics and electroweak measurements, we find that a Higgs boson at ∝126 GeV, which decays into two photons, can in

How distributed processing produces false negatives in voxel-based lesion-deficit analyses.

Science.gov (United States)

Gajardo-Vidal, Andrea; Lorca-Puls, Diego L; Crinion, Jennifer T; White, Jitrachote; Seghier, Mohamed L; Leff, Alex P; Hope, Thomas M H; Ludersdorfer, Philipp; Green, David W; Bowman, Howard; Price, Cathy J

2018-07-01

In this study, we hypothesized that if the same deficit can be caused by damage to one or another part of a distributed neural system, then voxel-based analyses might miss critical lesion sites because preservation of each site will not be consistently associated with preserved function. The first part of our investigation used voxel-based multiple regression analyses of data from 359 right-handed stroke survivors to identify brain regions where lesion load is associated with picture naming abilities after factoring out variance related to object recognition, semantics and speech articulation so as to focus on deficits arising at the word retrieval level. A highly significant lesion-deficit relationship was identified in left temporal and frontal/premotor regions. Post-hoc analyses showed that damage to either of these sites caused the deficit of interest in less than half the affected patients (76/162 = 47%). After excluding all patients with damage to one or both of the identified regions, our second analysis revealed a new region, in the anterior part of the left putamen, which had not been previously detected because many patients had the deficit of interest after temporal or frontal damage that preserved the left putamen. The results illustrate how (i) false negative results arise when the same deficit can be caused by different lesion sites; (ii) some of the missed effects can be unveiled by adopting an iterative approach that systematically excludes patients with lesions to the areas identified in previous analyses, (iii) statistically significant voxel-based lesion-deficit mappings can be driven by a subset of patients; (iv) focal lesions to the identified regions are needed to determine whether the deficit of interest is the consequence of focal damage or much more extensive damage that includes the identified region; and, finally, (v) univariate voxel-based lesion-deficit mappings cannot, in isolation, be used to predict outcome in other patients

The Distinction between Direct and General Costs with Regard to the Deduction of Input VAT - The Case of Acquisition, Holding and Sale of Shares

DEFF Research Database (Denmark)

Jensen, Dennis Ramsdahl; Stensgaard, Henrik

2012-01-01

of distinguishing between direct and general costs. On the other hand the aim is to describe and analyse the law as it stands regarding the treatment of shares in the EU VAT system, with a special focus on the right to deduct input VAT on costs re-lating to transactions in shares. As a part of this analysis the aim......In revealing the conditions for the deduction of input VAT, the essential questions concern the nature of the so-called ‘direct and immediate link’ test and thus also the criteria for the important distinction between direct costs and general costs. The ‘direct and immediate link’ test...... is of general importance to all types of costs, but judged from the case law of the ECJ it has especially materialised itself when it comes to costs related to the acquisition, holding or sales of shares. The purpose of this article is therefore twofold. On the one hand it deals with the difficult question...

Fracture Mechanics Analyses of the Slip-Side Joggle Regions of Wing-Leading-Edge Panels

Science.gov (United States)

Raju, Ivatury S.; Knight, Norman F., Jr.; Song, Kyongchan; Phillips, Dawn R.

2011-01-01

The Space Shuttle wing-leading edge consists of panels that are made of reinforced carbon-carbon. Coating spallation was observed near the slip-side region of the panels that experience extreme heating. To understand this phenomenon, a root-cause investigation was conducted. As part of that investigation, fracture mechanics analyses of the slip-side joggle regions of the hot panels were conducted. This paper presents an overview of the fracture mechanics analyses.

Accurate measurement of directional emittance of solar energy materials

NARCIS (Netherlands)

Nijnatten, van P.A.; Hugo-Le Gof, A.; Granqvist, C.-G.; Lampert, C.M.

1992-01-01

Directional emittance plays an important role in the calculation of radiative heat exchange. It partly determines the thermal insulation of single and multiple glazing and the efficiency of solar collectors. An emissiometer has been designed and built, capable for measurements of the directional

IDEA: Interactive Display for Evolutionary Analyses.

Science.gov (United States)

Egan, Amy; Mahurkar, Anup; Crabtree, Jonathan; Badger, Jonathan H; Carlton, Jane M; Silva, Joana C

2008-12-08

The availability of complete genomic sequences for hundreds of organisms promises to make obtaining genome-wide estimates of substitution rates, selective constraints and other molecular evolution variables of interest an increasingly important approach to addressing broad evolutionary questions. Two of the programs most widely used for this purpose are codeml and baseml, parts of the PAML (Phylogenetic Analysis by Maximum Likelihood) suite. A significant drawback of these programs is their lack of a graphical user interface, which can limit their user base and considerably reduce their efficiency. We have developed IDEA (Interactive Display for Evolutionary Analyses), an intuitive graphical input and output interface which interacts with PHYLIP for phylogeny reconstruction and with codeml and baseml for molecular evolution analyses. IDEA's graphical input and visualization interfaces eliminate the need to edit and parse text input and output files, reducing the likelihood of errors and improving processing time. Further, its interactive output display gives the user immediate access to results. Finally, IDEA can process data in parallel on a local machine or computing grid, allowing genome-wide analyses to be completed quickly. IDEA provides a graphical user interface that allows the user to follow a codeml or baseml analysis from parameter input through to the exploration of results. Novel options streamline the analysis process, and post-analysis visualization of phylogenies, evolutionary rates and selective constraint along protein sequences simplifies the interpretation of results. The integration of these functions into a single tool eliminates the need for lengthy data handling and parsing, significantly expediting access to global patterns in the data.

Experimental Investigation of Chatter Dynamics in Thin-walled Tubular Parts Turning

OpenAIRE

GERASIMENKO, Artem; GUSKOV, Mikhail; LORONG, Philippe; DUCHEMIN, Jérôme; GOUSKOV, Alexander

2016-01-01

Chatter prediction is nowadays frequently carried out for machining operations involving deformable parts or tools. These analyses are commonly based on the uncoupled elements of the system: frequency response of the deformable parts under non-rotating conditions and cutting law. The present investigation puts forward the dynamics of a thin-walled tubular part during straight axial turning undergoing chatter instability. Studied system’s peculiarities include quasi-static nominal cutting cond...

Directing sustainable investments in commercial real estate

NARCIS (Netherlands)

Entrop, A.G.; Brouwers, H.J.H.; Braganca, L.; Pinheiro, M.; Jalali, S.; Mateus, R.; Amoeda, R.; Guedes, Correia M.

2007-01-01

This paper focuses on the facility costs, energy use and water consumption of commercial real estate. A framework consisting of four components is established in which the performances on these three aspects are analysed. By using the first, second and third part of the framework suggestions for

PROTOTIPE VIDEO EDITOR DENGAN MENGGUNAKAN DIRECT X DAN DIRECT SHOW

Directory of Open Access Journals (Sweden)

Djoni Haryadi Setiabudi

2004-01-01

Full Text Available Technology development had given people the chance to capture their memorable moments in video format. A high quality digital video is a result of a good editing process. Which in turn, arise the new need of an editor application. In accordance to the problem, here the process of making a simple application for video editing needs. The application development use the programming techniques often applied in multimedia applications, especially video. First part of the application will begin with the video file compression and decompression, then we'll step into the editing part of the digital video file. Furthermore, the application also equipped with the facilities needed for the editing processes. The application made with Microsoft Visual C++ with DirectX technology, particularly DirectShow. The application provides basic facilities that will help the editing process of a digital video file. The application will produce an AVI format file after the editing process is finished. Through the testing process of this application shows the ability of this application to do the 'cut' and 'insert' of video files in AVI, MPEG, MPG and DAT formats. The 'cut' and 'insert' process only can be done in static order. Further, the aplication also provide the effects facility for transition process in each clip. Lastly, the process of saving the new edited video file in AVI format from the application. Abstract in Bahasa Indonesia : Perkembangan teknologi memberi kesempatan masyarakat untuk mengabadikan saat - saat yang penting menggunakan video. Pembentukan video digital yang baik membutuhkan proses editing yang baik pula. Untuk melakukan proses editing video digital dibutuhkan program editor. Berdasarkan permasalahan diatas maka pada penelitian ini dibuat prototipe editor sederhana untuk video digital. Pembuatan aplikasi memakai teknik pemrograman di bidang multimedia, khususnya video. Perencanaan dalam pembuatan aplikasi tersebut dimulai dengan pembentukan

Direct Analyses of Secondary Metabolites by Mass Spectrometry Imaging (MSI) from Sunflower (Helianthus annuus L.) Trichomes.

Science.gov (United States)

Brentan Silva, Denise; Aschenbrenner, Anna-Katharina; Lopes, Norberto Peporine; Spring, Otmar

2017-05-10

Helianthus annuus (sunflower) displays non-glandular trichomes (NGT), capitate glandular trichomes (CGT), and linear glandular trichomes (LGT), which reveal different chemical compositions and locations in different plant tissues. With matrix-assisted laser desorption/ionization (MALDI) and laser desorption/ionization (LDI) mass spectrometry imaging (MSI) techniques, efficient methods were developed to analyze the tissue distribution of secondary metabolites (flavonoids and sesquiterpenes) and proteins inside of trichomes. Herein, we analyzed sesquiterpene lactones, present in CGT, from leaf transversal sections using the matrix 2,5-dihydroxybenzoic acid (DHB) and α-cyano-4-hydroxycinnamic acid (CHCA) (mixture 1:1) with sodium ions added to increase the ionization in positive ion mode. The results observed for sesquiterpenes and polymethoxylated flavones from LGT were similar. However, upon desiccation, LGT changed their shape in the ionization source, complicating analyses by MSI mainly after matrix application. An alternative method could be applied to LGT regions by employing LDI (without matrix) in negative ion mode. The polymethoxylated flavones were easily ionized by LDI, producing images with higher resolution, but the sesquiterpenes were not observed in spectra. Thus, the application and viability of MALDI imaging for the analyses of protein and secondary metabolites inside trichomes were confirmed, highlighting the importance of optimization parameters.

The hemispherical deflector analyser revisited

Energy Technology Data Exchange (ETDEWEB)

Benis, E.P. [Institute of Electronic Structure and Laser, P.O. Box 1385, 71110 Heraklion, Crete (Greece)], E-mail: benis@iesl.forth.gr; Zouros, T.J.M. [Institute of Electronic Structure and Laser, P.O. Box 1385, 71110 Heraklion, Crete (Greece); Department of Physics, University of Crete, P.O. Box 2208, 71003 Heraklion, Crete (Greece)

2008-04-15

Using the basic spectrometer trajectory equation for motion in an ideal 1/r potential derived in Eq. (101) of part I [T.J.M. Zouros, E.P. Benis, J. Electron Spectrosc. Relat. Phenom. 125 (2002) 221], the operational characteristics of a hemispherical deflector analyser (HDA) such as dispersion, energy resolution, energy calibration, input lens magnification and energy acceptance window are investigated from first principles. These characteristics are studied as a function of the entry point R{sub 0} and the nominal value of the potential V(R{sub 0}) at entry. Electron-optics simulations and actual laboratory measurements are compared to our theoretical results for an ideal biased paracentric HDA using a four-element zoom lens and a two-dimensional position sensitive detector (2D-PSD). These results should be of particular interest to users of modern HDAs utilizing a PSD.

The hemispherical deflector analyser revisited

International Nuclear Information System (INIS)

Benis, E.P.; Zouros, T.J.M.

2008-01-01

Using the basic spectrometer trajectory equation for motion in an ideal 1/r potential derived in Eq. (101) of part I [T.J.M. Zouros, E.P. Benis, J. Electron Spectrosc. Relat. Phenom. 125 (2002) 221], the operational characteristics of a hemispherical deflector analyser (HDA) such as dispersion, energy resolution, energy calibration, input lens magnification and energy acceptance window are investigated from first principles. These characteristics are studied as a function of the entry point R 0 and the nominal value of the potential V(R 0 ) at entry. Electron-optics simulations and actual laboratory measurements are compared to our theoretical results for an ideal biased paracentric HDA using a four-element zoom lens and a two-dimensional position sensitive detector (2D-PSD). These results should be of particular interest to users of modern HDAs utilizing a PSD

Analysing performance through value creation

Directory of Open Access Journals (Sweden)

Adrian TRIFAN

2015-12-01

Full Text Available This paper draws a parallel between measuring financial performance in 2 variants: the first one using data offered by accounting, which lays emphasis on maximizing profit, and the second one which aims to create value. The traditional approach to performance is based on some indicators from accounting data: ROI, ROE, EPS. The traditional management, based on analysing the data from accounting, has shown its limits, and a new approach is needed, based on creating value. The evaluation of value based performance tries to avoid the errors due to accounting data, by using other specific indicators: EVA, MVA, TSR, CVA. The main objective is shifted from maximizing the income to maximizing the value created for shareholders. The theoretical part is accompanied by a practical analysis regarding the creation of value and an analysis of the main indicators which evaluate this concept.

MELCOR 1.8.2 Assessment: IET direct containment heating tests

Energy Technology Data Exchange (ETDEWEB)

Kmetyk, L.N.

1993-10-01

MELCOR is a fully integrated, engineering-level computer code, being developed at Sandia National Laboratories for the USNRC, that models the entire spectrum of severe accident phenomena in a unified framework for both BWRs and PWRS. As part of an ongoing assessment program, the MELCOR computer code has been used to analyze several of the IET direct containment heating experiments done at 1:10 linear scale in the Surtsey test facility at Sandia and at 1:40 linear scale in the corium-water thermal interactions (CWTI) COREXIT test facility at Argonne National Laboratory. These MELCOR calculations were done as an open post-test study, with both the experimental data and CONTAIN results available to guide the selection of code input. Basecase MELCOR results are compared to test data in order to evaluate the new HPME DCH model recently added in MELCOR version 1.8.2. The effect of various user-input parameters in the HPME model, which define both the initial debris source and the subsequent debris interaction, were investigated in sensitivity studies. In addition, several other non-default input modelling changes involving other MELCOR code packages were required in our IET assessment analyses in order to reproduce the observed experiment behavior. Several calculations were done to identify whether any numeric effects exist in our DCH IET assessment analyses.

Quantitative metagenomic analyses based on average genome size normalization

DEFF Research Database (Denmark)

Frank, Jeremy Alexander; Sørensen, Søren Johannes

2011-01-01

provide not just a census of the community members but direct information on metabolic capabilities and potential interactions among community members. Here we introduce a method for the quantitative characterization and comparison of microbial communities based on the normalization of metagenomic data...... marine sources using both conventional small-subunit (SSU) rRNA gene analyses and our quantitative method to calculate the proportion of genomes in each sample that are capable of a particular metabolic trait. With both environments, to determine what proportion of each community they make up and how......). These analyses demonstrate how genome proportionality compares to SSU rRNA gene relative abundance and how factors such as average genome size and SSU rRNA gene copy number affect sampling probability and therefore both types of community analysis....

Analyses of natural resources in 10 CFR Part 60 as related to inadvertent human intrusion

International Nuclear Information System (INIS)

Miklas, M.P.; Lefevre, H.E.

1993-01-01

The purpose of this paper is to examine the intent of the regulatory language of the portions of 10 CFR Part 60 which deal with considerations of the natural resources of a proposed geologic repository for high-level radioactive wastes as they relate to inadvertent human intrusion. Four Potentially Adverse Conditions (PAC) the requirements of 10 CFR 60.21(c)(13) are shown to be related to natural resources. Groundwater is identified as a natural resource known to be present at Yucca Mountain, Nevada. For economic considerations of natural resources, the open-quotes foreseeable futureclose quotes is thought to be no more than 50 years. Two of the topics addressed by the PACs, subsurface mining and drilling at a proposed repository site, are pre-site-characterization activities which must be evaluated in the context of repository performance criteria set by the US EPA standard, 40 CFR Part 191. An alternative US DOE compliance demonstration to another PAC, 10 CFR 60.122(c)(17), might be to use an open-quotes explorationist perspectiveclose quotes of natural resource assessment. The Commission intends for DOE to evaluate the likelihood and consequence of inadvertent human intrusion into a geologic repository as a result of exploration or exploitation of natural resources within or near a proposed high-level radioactive waste geologic repository

Microstructure and micro-hardness analyses of titanium alloy Ti-6Al-4V parts manufactured by selective laser melting

Directory of Open Access Journals (Sweden)

Lancea Camil

2017-01-01

Full Text Available Selective Laser Melting (SLM is one of the powder based additive manufacturing technologies and it is, as well, the most rapidly growing technique in Rapid Prototyping. In this paper is presented a microstructure analysis using Scanning Electron Microscope (LEO 1525 SEM, of Ti6Al4V parts exposed into a corrosion environment. The corrosion environment was generated using a salt chamber with 5% and 10% NaCl concentration and an ACS-Sunrise climatic chamber. The parts were also subjected to tests in order to determine their micro-hardness, followed by a statistical processing of the obtained data. The parts, having a lattice structure, were built on a Selective Laser Melting machine.

SCALE: A modular code system for performing standardized computer analyses for licensing evaluation. Functional modules F1--F8 -- Volume 2, Part 1, Revision 4

Energy Technology Data Exchange (ETDEWEB)

Greene, N.M.; Petrie, L.M.; Westfall, R.M.; Bucholz, J.A.; Hermann, O.W.; Fraley, S.K. [Oak Ridge National Lab., TN (United States)

1995-04-01

SCALE--a modular code system for Standardized Computer Analyses Licensing Evaluation--has been developed by Oak Ridge National Laboratory at the request of the US Nuclear Regulatory Commission. The SCALE system utilizes well-established computer codes and methods within standard analysis sequences that (1) allow an input format designed for the occasional user and/or novice, (2) automate the data processing and coupling between modules, and (3) provide accurate and reliable results. System development has been directed at problem-dependent cross-section processing and analysis of criticality safety, shielding, heat transfer, and depletion/decay problems. Since the initial release of SCALE in 1980, the code system has been heavily used for evaluation of nuclear fuel facility and package designs. This revision documents Version 4.2 of the system. The manual is divided into three volumes: Volume 1--for the control module documentation; Volume 2--for functional module documentation; and Volume 3--for documentation of the data libraries and subroutine libraries.

SCALE: A modular code system for performing standardized computer analyses for licensing evaluation. Functional modules F1--F8 -- Volume 2, Part 1, Revision 4

International Nuclear Information System (INIS)

Greene, N.M.; Petrie, L.M.; Westfall, R.M.; Bucholz, J.A.; Hermann, O.W.; Fraley, S.K.

1995-04-01

SCALE--a modular code system for Standardized Computer Analyses Licensing Evaluation--has been developed by Oak Ridge National Laboratory at the request of the US Nuclear Regulatory Commission. The SCALE system utilizes well-established computer codes and methods within standard analysis sequences that (1) allow an input format designed for the occasional user and/or novice, (2) automate the data processing and coupling between modules, and (3) provide accurate and reliable results. System development has been directed at problem-dependent cross-section processing and analysis of criticality safety, shielding, heat transfer, and depletion/decay problems. Since the initial release of SCALE in 1980, the code system has been heavily used for evaluation of nuclear fuel facility and package designs. This revision documents Version 4.2 of the system. The manual is divided into three volumes: Volume 1--for the control module documentation; Volume 2--for functional module documentation; and Volume 3--for documentation of the data libraries and subroutine libraries

Canonical correlation analysis of multiple sensory directed metabolomics data blocks reveals corresponding parts between data blocks.

NARCIS (Netherlands)

Doeswijk, T. G.; Hageman, J.A.; Westerhuis, J.A.; Tikunov, Y.; Bovy, A.; van Eeuwijk, F.A.

2011-01-01

Multiple analytical platforms are frequently used in metabolomics studies. The resulting multiple data blocks contain, in general, similar parts of information which can be disclosed by chemometric methods. The metabolites of interest, however, are usually just a minor part of the complete data

Changing nature of equipment and parts qualification

International Nuclear Information System (INIS)

Bucci, R.M.

1988-01-01

Ideally, the original supplier of a piece of nuclear safety-related equipment has performed a qualification program and will continue to support that equipment throughout the lifetime of the nuclear power plants in which in equipment is installed. The supplier's nuclear quality assurance program will be maintained and he will continue to offer all necessary replacement parts. These parts will be identical to the original parts, certified to the original purchase order requirements, and the parts will be offered at competitive prices. Due to the changing nature of the nuclear plant equipment market, however, one or more of those ideal features are frequently unavailable when safety-related replacement equipment or parts are required. Thus, the process of equipment and parts qualification has had to adjust in order to ensure obtaining qualified replacements when needed. This paper presents some new directions taken in the qualification of replacement equipment and parts to meet changes in the marketplace

The Role of Direct Marketing in Relation with the Consumers in Kosovo

Directory of Open Access Journals (Sweden)

MSc. Halit Karaxha

2016-07-01

Full Text Available Direct marketing is very important in creating good relations with clients for the presentation of new products/services, and to also achieve sales in the meantime. Direct marketing uses different techniques, such as e-mails, telephones, fairs, festivals and other techniques in order to directly communicate with clients by being very flexible, and it also allows immediate feedback. This paper consists of two parts: the first part is related to the review of literature regarding direct marketing, and the second part is related to the research conducted through surveys in companies, by interviewing the director, general manager, marketing manager and managers of other departments within the company who have knowledge about the marketing in the company. The study regarding direct marketing and its role in relation with consumers is an interesting field to study, but at the same time it is also a challenge, because knowing more about one technique or another is a field on its own and requires the analysis of particular specifics of each technique in order for the direct marketing to have a positive impact in creating good relations with the clients on the basis of fulfilling their needs and requests.

Types of suggestibility: Relationships among compliance, indirect, and direct suggestibility.

Science.gov (United States)

Polczyk, Romuald; Pasek, Tomasz

2006-10-01

It is commonly believed that direct suggestibility, referring to overt influence, and indirect suggestibility, in which the intention to influence is hidden, correlate poorly. This study demonstrates that they are substantially related, provided that they tap similar areas of influence. Test results from 103 students, 55 women and 48 men, were entered into regression analyses. Indirect suggestibility, as measured by the Sensory Suggestibility Scale for Groups, and compliance, measured by the Gudjonsson Compliance Scale, were predictors of direct suggestibility, assessed with the Barber Suggestibility Scale. Spectral analyses showed that indirect suggestibility is more related to difficult tasks on the BSS, but compliance is more related to easy tasks on this scale.

TAX COMPETITION REGARDING FOREIGN DIRECT INVESTMENT BETWEEN TRANSITION EUROPEAN COUNTRIES

Directory of Open Access Journals (Sweden)

Ramona DUMITRIU

2005-01-01

Full Text Available This paper explores the fiscal measures adopted in the transition European countries in order toencourage the foreign direct investment. There were analysed six countries: Albania, Macedonia,Moldova, Russian Federation, Union of Serbia and Muntenegro, Ukraine, based on the four criteria:corporate and capital gains tax rates, withholding taxes, tax incentives, foreign tax relief andtransfer pricing rules. Finally, the conclusion is that all the analysed countries offer favourable fiscalconditions for the foreign direct investment. Serbia, Muntenegro, Macedonia and Moldova haveattractive fiscal regimes, showing that the authorities from these countries count on the foreign directinvestment as a solution of solving the social and economic problems.

Parts and Components Reliability Assessment: A Cost Effective Approach

Science.gov (United States)

Lee, Lydia

2009-01-01

System reliability assessment is a methodology which incorporates reliability analyses performed at parts and components level such as Reliability Prediction, Failure Modes and Effects Analysis (FMEA) and Fault Tree Analysis (FTA) to assess risks, perform design tradeoffs, and therefore, to ensure effective productivity and/or mission success. The system reliability is used to optimize the product design to accommodate today?s mandated budget, manpower, and schedule constraints. Stand ard based reliability assessment is an effective approach consisting of reliability predictions together with other reliability analyses for electronic, electrical, and electro-mechanical (EEE) complex parts and components of large systems based on failure rate estimates published by the United States (U.S.) military or commercial standards and handbooks. Many of these standards are globally accepted and recognized. The reliability assessment is especially useful during the initial stages when the system design is still in the development and hard failure data is not yet available or manufacturers are not contractually obliged by their customers to publish the reliability estimates/predictions for their parts and components. This paper presents a methodology to assess system reliability using parts and components reliability estimates to ensure effective productivity and/or mission success in an efficient manner, low cost, and tight schedule.

Deux théories de l'analyse psychique: Wundt et Brentano

OpenAIRE

Dewalque, Arnaud

2014-01-01

L’objectif de ce chapitre est de réévaluer succinctement les relations entre la phénoménologie et la psychologie expérimentale naissantes à partir des positions de Franz Brentano et de Wilhelm Wundt. Contrairement à une idée reçue, je suggère, d’une part, que les programmes analytiques de Brentano et de Wundt reposent tous deux sur un procédé expérimental consistant à faire varier les parties des phénomènes psychiques étudiés. Mais je suggère aussi, d’autre part, que les théories de l’analyse...

Aggravated unbundling in German energy industry (part 1). Basics: EU acceleration directive and economic monopoly theory; Verschaerftes Unbundling in der deutschen Energiewirtschaft (Teil 1). Grundlagen: EG-Beschleunigungsnovellen und volkswirtschaftliche Monopoltheorie

Energy Technology Data Exchange (ETDEWEB)

Wiedmann, K.P. [Hannover Univ. (Germany); Langerfeldt, M. [Lueneburg Univ. (Germany)

2004-03-15

The main innovations of the so-called acceleration directive are clearly aggravated regulations for divestiture of vertically integrated enterprises. This difficulty commonly known as unbundling is the topic of this two-part article. Part 1 reviews the process of European legislation. The unbundling regulations of the current and future laws are then presented systematically against the economic background. A microeconomic assessment of the regulations will follow in part 2. [German] Zu den wichtigsten Neuerungen der sog. Beschleunigungsrichtlinien zaehlen deutlich verschaerfte Entflechtungsregelungen fuer vertikal integrierte Versorger. Die gemeinhin mit dem Stichwort 'Unbundling' bezeichnete Problematik ist Gegenstand des vorliegenden zweiteiligen Beitrags. Der 1. Teil blickt kurz zurueck auf das Verfahren der europaeischen Rechtsetzung. Anschliessend werden die Unbundling-Vorschriften des bestehenden und des zukuenftigen Rechts systematisch im Spiegel ihres volkswirtschaftlichen Hintergrunds vorgestellt. Eine betriebswirtschaftliche Bewertung der Neuerungen folgt in Teil 2. (orig.)

Direct Reuse of Rare Earth Permanent Magnets—Coating Integrity

DEFF Research Database (Denmark)

Høgberg, Stig; Holbøll, Joachim; Mijatovic, Nenad

2017-01-01

Rare earth permanent magnets can be reused directly as an alternative to traditional recycling methods, in which scrapped magnets are reprocessed into new magnets by undergoing many of the original energy-intensive and expensive production processes. Direct reuse entails using segmented magnet...... assemblies built by several small standard-sized magnets that can be reused directly in a number of different applications. A central part of the direct reuse strategy is to separate and demagnetize magnets by heating them to the Curie temperature. We investigated the validity of direct reuse as a rare earth...

WIND SPEED AND ENERGY POTENTIAL ANALYSES

Directory of Open Access Journals (Sweden)

A. TOKGÖZLÜ

2013-01-01

Full Text Available This paper provides a case study on application of wavelet techniques to analyze wind speed and energy (renewable and environmental friendly energy. Solar and wind are main sources of energy that allows farmers to have the potential for transferring kinetic energy captured by the wind mill for pumping water, drying crops, heating systems of green houses, rural electrification's or cooking. Larger wind turbines (over 1 MW can pump enough water for small-scale irrigation. This study tried to initiate data gathering process for wavelet analyses, different scale effects and their role on wind speed and direction variations. The wind data gathering system is mounted at latitudes: 37° 50" N; longitude 30° 33" E and height: 1200 m above mean sea level at a hill near Süleyman Demirel University campus. 10 minutes average values of two levels wind speed and direction (10m and 30m above ground level have been recorded by a data logger between July 2001 and February 2002. Wind speed values changed between the range of 0 m/s and 54 m/s. Annual mean speed value is 4.5 m/s at 10 m ground level. Prevalent wind

Analysing Memoir Topic Trends in the Social and Political Sciences ...

African Journals Online (AJOL)

While the issue of plagiarism was not specifically addressed by this study, it is possible that the N-map trends portrayed by this research emerge in part because some students have used past memoirs as templates, possibly including indirect or direct copying. For this reason, the research concluded that while the majority ...

Utilising "Low Tech" Analytical Frameworks to Analyse Dyslexic Caribbean Students' Classroom Narratives

Science.gov (United States)

Blackman, Stacey

2007-01-01

The cognitions of Caribbean students with dyslexia are explored as part of an embedded multiple case study approach to teaching and learning at two secondary schools on the island of Barbados. This exploration employed "low tech" approaches to analyse what pupils had said in interviews using a Miles and Huberman (1994) framework.…

Detection and analyse of hazardous roads in rural areas

DEFF Research Database (Denmark)

Sørensen, Michael

2003-01-01

For the last period of 5-10 years the notion "Grey roads" (hazardous roads) has appeared in Danish traffic safety work and improvement of these roads has become a very important part of the traffic safety work in many countries. The problem is, that the notion never has been clearly defined......, and therefore there are no unambiguos methods to point out and analyse "Grey roads". In this article based on a ph.D.-project a method to detecting "Grey roads" is introduced....

Fine Coining of Bulk Metal Formed Parts in Digital Environment

International Nuclear Information System (INIS)

Pepelnjak, T.; Kuzman, K.; Krusic, V.

2007-01-01

At present the production of bulk metal formed parts in the automotive industry must increasingly fulfil demands for narrow tolerance fields. The final goal of the million parts production series is oriented towards zero defect production. This is possible by achieving production tolerances which are even tighter than the prescribed ones. Different approaches are used to meet this demanding objective affected by many process parameters. Fine coining as a final forming operation is one of the processes which enables the production of good manufacturing tolerances and high process stability. The paper presents the analyses of the production of the inner race and a digital evaluation of manufacturing tolerances caused by different material parameters of the workpiece. Digital optimisation of the fine coining with FEM simulations was performed in two phases. Firstly, fine coining of the inner racer in a digital environment was comparatively analysed with the experimental work in order to verify the accuracy and reliability of digitally calculated data. Secondly, based on the geometrical data of a digitally fine coined part, tool redesign was proposed in order to tighten production tolerances and increase the process stability of the near-net-shaped cold formed part

Direct determinations of the πNN coupling constants

International Nuclear Information System (INIS)

Ericson, T.E.O.; ); Loiseau, B.

1998-01-01

A novel extrapolation method has been used to deduce directly the charged πNN coupling constant from backward np differential scattering cross sections. The extracted value, g c 2 = 14.52(026)is higher than the indirectly deduced values obtained in nucleon-nucleon energy-dependent partial-wave analyses. Our preliminary direct value from a reanalysis of the GMO sum-rule points to an intermediate value of g c 2 about 13.97(30). (author)

Estimating direct and indirect costs of premenstrual syndrome.

Science.gov (United States)

Borenstein, Jeff; Chiou, Chiun-Fang; Dean, Bonnie; Wong, John; Wade, Sally

2005-01-01

To quantify the economic impact of premenstrual syndrome (PMS) on the employer. Data were collected from 374 women aged 18-45 with regular menses. Direct costs were quantified using administrative claims of these patients and the Medicare Fee Schedule. Indirect costs were quantified by both self-reported days of work missed and lost productivity at work. Regression analyses were used to develop a model to project PMS-related direct and indirect costs. A total of 29.6% (n = 111) of the participants were diagnosed with PMS. A PMS diagnosis was associated with an average annual increase of $59 in direct costs (P increase in direct medical costs and a large increase in indirect costs.

Systematic realisation of control flow analyses for CML

DEFF Research Database (Denmark)

Gasser, K.L.S.; Nielson, Flemming; Nielson, Hanne Riis

1997-01-01

We present a methodology for the systematic realisation of control flow analyses and illustrate it for Concurrent ML. We start with an abstract specification of the analysis that is next proved semantically sound with respect to a traditional small-step operational semantics; this result holds......) to be defined in a syntax-directed manner, and (iii) to generate a set of constraints that subsequently can be solved by standard techniques. We prove equivalence results between the different versions of the analysis; in particular it follows that the least solution to the constraints generated...

Induced isospin mixing in direct nuclear reactions

International Nuclear Information System (INIS)

Lenske, H.

1979-07-01

The effect of charge-dependent interactions on nuclear reactions is investigated. First, a survey is given on the most important results concerning the charge dependence of the nucleon-nucleon interaction. The isospin symmetry and invariance principles are discussed. Violations of the isospin symmetry occuring in direct nuclear reactions are analysed using the soupled channel theory, the folding model and microscopic descriptions. Finally, induced isospin mixing in isospin-forbidden direct reactions is considered using the example of the inelastic scattering of deuterons on 12 C. (KBE)

Hidden Identification on Parts: Magnetic Machine-Readable Matrix Symbols

Science.gov (United States)

Schramm, Harry F.; Jones, Clyde S.; Roxby, Donald L.; Teed, James D.; Shih, William C. L.; Fitzpatrick, Gerald L.; Knisely, Craig

2005-01-01

All NASA parts have identification, usually expressed in terms of part number, serial number, and the like. In most cases, this identification is permanently marked directly on the part for tracking throughout its life cycle. NASA has developed a method for reading the matrix symbol through up to 15 mils (25 m) of paint (5 or 6 layers). This method of part identification involves coating selected patches on the objects with magnetic materials in matrix symbol patterns and reading the patterns by use of magneto-optical imaging equipment.

Preliminary Water-Table Map and Water-Quality Data for Part of the Matanuska-Susitna Valley, Alaska, 2005

Science.gov (United States)

Moran, Edward H.; Solin, Gary L.

2006-01-01

The Matanuska-Susitna Valley is in the northeastern part of the Cook Inlet Basin, Alaska, an area experiencing rapid population growth and development proximal to many lakes. Here water commonly flows between lakes and ground water, indicating interrelation between water quantity and quality. Thus concerns exist that poorer quality ground water may degrade local lake ecosystems. This concern has led to water-quality sampling in cooperation with the Alaska Department of Environmental Conservation and the Matanuska-Susitna Borough. A map showing the estimated altitude of the water table illustrates potential ground-water flow directions and areas where ground- and surface-water exchanges and interactions might occur. Water quality measured in selected wells and lakes indicates some differences between ground water and surface water. 'The temporal and spatial scarcity of ground-water-level and water-quality data limits the analysis of flow direction and water quality. Regionally, the water-table map indicates that ground water in the eastern and southern parts of the study area flows southerly. In the northcentral area, ground water flows predominately westerly then southerly. Although ground and surface water in most areas of the Matanuska-Susitna Valley are interconnected, they are chemically different. Analyses of the few water-quality samples collected in the area indicate that dissolved nitrite plus nitrate and orthophosphorus concentrations are higher in ground water than in surface water.'

IDEA: Interactive Display for Evolutionary Analyses

Directory of Open Access Journals (Sweden)

Carlton Jane M

2008-12-01

Full Text Available Abstract Background The availability of complete genomic sequences for hundreds of organisms promises to make obtaining genome-wide estimates of substitution rates, selective constraints and other molecular evolution variables of interest an increasingly important approach to addressing broad evolutionary questions. Two of the programs most widely used for this purpose are codeml and baseml, parts of the PAML (Phylogenetic Analysis by Maximum Likelihood suite. A significant drawback of these programs is their lack of a graphical user interface, which can limit their user base and considerably reduce their efficiency. Results We have developed IDEA (Interactive Display for Evolutionary Analyses, an intuitive graphical input and output interface which interacts with PHYLIP for phylogeny reconstruction and with codeml and baseml for molecular evolution analyses. IDEA's graphical input and visualization interfaces eliminate the need to edit and parse text input and output files, reducing the likelihood of errors and improving processing time. Further, its interactive output display gives the user immediate access to results. Finally, IDEA can process data in parallel on a local machine or computing grid, allowing genome-wide analyses to be completed quickly. Conclusion IDEA provides a graphical user interface that allows the user to follow a codeml or baseml analysis from parameter input through to the exploration of results. Novel options streamline the analysis process, and post-analysis visualization of phylogenies, evolutionary rates and selective constraint along protein sequences simplifies the interpretation of results. The integration of these functions into a single tool eliminates the need for lengthy data handling and parsing, significantly expediting access to global patterns in the data.

77 FR 46805 - Small Business Innovation Research Program Policy Directive

Science.gov (United States)

2012-08-06

... Vol. 77 Monday, No. 151 August 6, 2012 Part II Small Business Administration 13 CFR Chapter I Small Business Innovation Research Program Policy Directive; Small Business Technology Transfer Program Policy Directive; Small Business Innovation Research (SBIR) Program and Small Business Technology...

Synthesis, structure and physical properties of a new TTF derivative containing a PPD part

International Nuclear Information System (INIS)

Fujiwara, H; Sugishima, Y; Tsujimoto, K

2008-01-01

To develop new photo-conducting multi-functional materials, a new tetrathiafulvalene (TTF) derivative containing a 2,5-diphenyl-1,3,4-oxadiazole (PPD) moiety, in which the PPD part is connected directly to the TTF part with a single bond, was synthesized by the Pd(PPh 3 ) 4 -catalyzed Stille coupling reaction. X-Ray crystal structure analysis of the t-Butyl derivative (1) indicated the high planarity of the molecular skeleton and possible conduction pathways along the side-by-side direction of the TTF parts. Fluorescence from the PPD part of 1 was almost quenched by the intramolecular electron transfer from the electron-donating TTF part to the PPD part even when the PPD was irradiated by the excitation light of 315 nm. The single crystalline sample of the TCNQ complex of 1 (1-TCNQ) was prepared by a mixing method in CH 3 CN. The X-ray crystal structure analysis of 1-TCNQ revealed that there is PPD - TCNQ - TTF -type mixed stacking structure along the stacking direction, resulting in insulating behaviour of this complex.

Severe accident recriticality analyses (SARA)

DEFF Research Database (Denmark)

Frid, W.; Højerup, C.F.; Lindholm, I.

2001-01-01

with all three codes. The core initial and boundary conditions prior to recriticality have been studied with the severe accident codes SCDAP/RELAP5, MELCOR and MAAP4. The results of the analyses show that all three codes predict recriticality-both super-prompt power bursts and quasi steady-state power......Recriticality in a BWR during reflooding of an overheated partly degraded core, i.e. with relocated control rods, has been studied for a total loss of electric power accident scenario. In order to assess the impact of recriticality on reactor safety, including accident management strategies......, which results in large energy deposition in the fuel during power burst in some accident scenarios. The highest value, 418 cal g(-1), was obtained with SIMULATE-3K for an Oskarshamn 3 case with reflooding rate of 2000 kg s(-1). In most cases, however, the predicted energy deposition was smaller, below...

A Directed Network of Greek and Roman Mythology

OpenAIRE

Choi, Yeon-Mu; Kim, Hyun-Joo

2005-01-01

We study the Greek and Roman mythology using the network theory. We construct a directed network by using a dictionary of Greek and Roman mythology in which the nodes represent the entries listed in the dictionary and we make directional links from an entry to other entries that appear in its explanatory part. We find that this network is clearly not a random network but a directed scale-free network. Also measuring the various quantities which characterize the mythology network, we analyze t...

Analysing public relations education through international standards: The Portuguese case

OpenAIRE

Gonçalves, Gisela Marques Pereira; Spínola, Susana de Carvalho; Padamo, Celma

2013-01-01

By using international reports on PR education as a benchmark we analyse the status of PR higher education in Portugal. Despite differences among the study programs, the findings reveal that the standard five courses recommendation by the Commission on Public Relations Education (CPRE) are a part of Portuguese undergraduate curriculum. This includes 12 of the 14 content field guidelines needed to achieve the ideal master's program. Data shows, however, the difficulty of positioning public rel...

Humidification-Dehumidification (HDH) Spray Column Direct Contact Condenser Part I: Countercurrent Flow

International Nuclear Information System (INIS)

Karameldin, A.; Shouman, L.; Fadel, D.

2016-01-01

Humidification-De humidification (HDH) is a low grade energy desalination technology. Hot humid air and cooling spray water in counter current flow with direct contact is theoretically analyzed in the present work. Direct contact spray condenser is studied to obtain the effect of various parameters on its performance. A computer program describing the theoretical model is designed to solve one-dimensional differential equations by using Rung-Kutta method. The results show that the column length has a great effect on the performance of the spray condenser. At a column height of 2, 5,10, and 20 m the humidity of the outlet air decreases by 72, 89, 97, and 99% respectively. The humid air temperature has a great influence on the productivity; me an while the temperature difference between the humid air and sprayed water has less effect. A case study of a contiguous co-generation electricity and water in Nuclear Power Plants (NPP) shows that the optimal productivity by HDH is feasible and can reach more than 15 m"3 /day.m"2, enabling a total productivity that varied from 120,000 to 300,000 m"3 /day. The design curves describing the process are obtained together in addition to a formula for the optimal productivity in terms of humid air and sprayed water fluxes at different humid air temperatures is derived

Smartphone Analytics: Mobilizing the Lab into the Cloud for Omic-Scale Analyses.

Science.gov (United States)

Montenegro-Burke, J Rafael; Phommavongsay, Thiery; Aisporna, Aries E; Huan, Tao; Rinehart, Duane; Forsberg, Erica; Poole, Farris L; Thorgersen, Michael P; Adams, Michael W W; Krantz, Gregory; Fields, Matthew W; Northen, Trent R; Robbins, Paul D; Niedernhofer, Laura J; Lairson, Luke; Benton, H Paul; Siuzdak, Gary

2016-10-04

Active data screening is an integral part of many scientific activities, and mobile technologies have greatly facilitated this process by minimizing the reliance on large hardware instrumentation. In order to meet with the increasingly growing field of metabolomics and heavy workload of data processing, we designed the first remote metabolomic data screening platform for mobile devices. Two mobile applications (apps), XCMS Mobile and METLIN Mobile, facilitate access to XCMS and METLIN, which are the most important components in the computer-based XCMS Online platforms. These mobile apps allow for the visualization and analysis of metabolic data throughout the entire analytical process. Specifically, XCMS Mobile and METLIN Mobile provide the capabilities for remote monitoring of data processing, real time notifications for the data processing, visualization and interactive analysis of processed data (e.g., cloud plots, principle component analysis, box-plots, extracted ion chromatograms, and hierarchical cluster analysis), and database searching for metabolite identification. These apps, available on Apple iOS and Google Android operating systems, allow for the migration of metabolomic research onto mobile devices for better accessibility beyond direct instrument operation. The utility of XCMS Mobile and METLIN Mobile functionalities was developed and is demonstrated here through the metabolomic LC-MS analyses of stem cells, colon cancer, aging, and bacterial metabolism.

Dynamics of directional coupling underlying spike-wave discharges

NARCIS (Netherlands)

Sysoeva, M.V.; Luttjohann, A.K.; Luijtelaar, E.L.J.M. van; Sysoev, I.V.

2016-01-01

Purpose: Spike and wave discharges (SWDs), generated within cortico-thalamo-cortical networks, are the electroencephalographic biomarker of absence epilepsy. The current work aims to identify mechanisms of SWD initiation, maintenance and termination by the analyses of dynamics and directionality of

Direct solvers performance on h-adapted grids

KAUST Repository

Paszynski, Maciej; Pardo, David; Calo, Victor M.

2015-01-01

We analyse the performance of direct solvers when applied to a system of linear equations arising from an hh-adapted, C0C0 finite element space. Theoretical estimates are derived for typical hh-refinement patterns arising as a result of a point, edge, or face singularity as well as boundary layers. They are based on the elimination trees constructed specifically for the considered grids. Theoretical estimates are compared with experiments performed with MUMPS using the nested-dissection algorithm for construction of the elimination tree from METIS library. The numerical experiments provide the same performance for the cases where our trees are identical with those constructed by the nested-dissection algorithm, and worse performance for some cases where our trees are different. We also present numerical experiments for the cases with mixed singularities, where how to construct optimal elimination trees is unknown. In all analysed cases, the use of hh-adaptive grids significantly reduces the cost of the direct solver algorithm per unknown as compared to uniform grids. The theoretical estimates predict and the experimental data confirm that the computational complexity is linear for various refinement patterns. In most cases, the cost of the direct solver per unknown is lower when employing anisotropic refinements as opposed to isotropic ones.

Direct solvers performance on h-adapted grids

KAUST Repository

Paszynski, Maciej

2015-05-27

We analyse the performance of direct solvers when applied to a system of linear equations arising from an hh-adapted, C0C0 finite element space. Theoretical estimates are derived for typical hh-refinement patterns arising as a result of a point, edge, or face singularity as well as boundary layers. They are based on the elimination trees constructed specifically for the considered grids. Theoretical estimates are compared with experiments performed with MUMPS using the nested-dissection algorithm for construction of the elimination tree from METIS library. The numerical experiments provide the same performance for the cases where our trees are identical with those constructed by the nested-dissection algorithm, and worse performance for some cases where our trees are different. We also present numerical experiments for the cases with mixed singularities, where how to construct optimal elimination trees is unknown. In all analysed cases, the use of hh-adaptive grids significantly reduces the cost of the direct solver algorithm per unknown as compared to uniform grids. The theoretical estimates predict and the experimental data confirm that the computational complexity is linear for various refinement patterns. In most cases, the cost of the direct solver per unknown is lower when employing anisotropic refinements as opposed to isotropic ones.

Stress analyses of ITER toroidal field coils under fault conditions

International Nuclear Information System (INIS)

Jong, C.T.J.

1990-02-01

The International Thermonuclear Experimental Reactor (ITER) is intended as an experimental thermonuclear tokamak reactor for testing the basic physics, performance and technologies essential to future fusion reactors. The ITER design will be based on extensive new design work, supported by new physical and technological results, and on the great body of experience built up over several years from previous national and international reactor studies. Conversely, the ITER design process should provide the fusion community with valuable insights into what key areas need further development or clarification as we move forward towards practical fusion power. As part of the design process of the ITER toroidal field coils the mechanical behaviour of the magnetic system under fault conditions has to be analysed in more detail. This paper describes the work carried out to create a detailed finite element model of two toroidal field coils as well as some results of linear elastic analyses with fault conditions. The analyses have been performed with the finite element code ANSYS. (author). 5 refs.; 8 figs.; 2 tabs

Multivariate differential analyses of adolescents' experiences of aggression in families

Directory of Open Access Journals (Sweden)

Chris Myburgh

2011-01-01

Full Text Available Aggression is part of South African society and has implications for the mental health of persons living in South Africa. If parents are aggressive adolescents are also likely to be aggressive and that will impact negatively on their mental health. In this article the nature and extent of adolescents' experiences of aggression and aggressive behaviour in the family are investigated. A deductive explorative quantitative approach was followed. Aggression is reasoned to be dependent on aspects such as self-concept, moral reasoning, communication, frustration tolerance and family relationships. To analyse the data from questionnaires of 101 families (95 adolescents, 95 mothers and 91 fathers Cronbach Alpha, various consecutive first and second order factor analyses, correlations, multiple regression, MANOVA, ANOVA and Scheffè/ Dunnett tests were used. It was found that aggression correlated negatively with the independent variables; and the correlations between adolescents and their parents were significant. Regression analyses indicated that different predictors predicted aggression. Furthermore, differences between adolescents and their parents indicated that the experienced levels of aggression between adolescents and their parents were small. Implications for education are given.

75 FR 1566 - National Industrial Security Program Directive No. 1

Science.gov (United States)

2010-01-12

... NATIONAL ARCHIVES AND RECORDS ADMINISTRATION Information Security Oversight Office 32 CFR Part 2004 [NARA-09-0005] RIN 3095-AB34 National Industrial Security Program Directive No. 1 AGENCY... the National Industrial Security Program Directive No. 1. This correction assigns a Federal Docket...

Sobol method application in dimensional sensitivity analyses of different AFM cantilevers for biological particles

Science.gov (United States)

Korayem, M. H.; Taheri, M.; Ghahnaviyeh, S. D.

2015-08-01

Due to the more delicate nature of biological micro/nanoparticles, it is necessary to compute the critical force of manipulation. The modeling and simulation of reactions and nanomanipulator dynamics in a precise manipulation process require an exact modeling of cantilevers stiffness, especially the stiffness of dagger cantilevers because the previous model is not useful for this investigation. The stiffness values for V-shaped cantilevers can be obtained through several methods. One of them is the PBA method. In another approach, the cantilever is divided into two sections: a triangular head section and two slanted rectangular beams. Then, deformations along different directions are computed and used to obtain the stiffness values in different directions. The stiffness formulations of dagger cantilever are needed for this sensitivity analyses so the formulations have been driven first and then sensitivity analyses has been started. In examining the stiffness of the dagger-shaped cantilever, the micro-beam has been divided into two triangular and rectangular sections and by computing the displacements along different directions and using the existing relations, the stiffness values for dagger cantilever have been obtained. In this paper, after investigating the stiffness of common types of cantilevers, Sobol sensitivity analyses of the effects of various geometric parameters on the stiffness of these types of cantilevers have been carried out. Also, the effects of different cantilevers on the dynamic behavior of nanoparticles have been studied and the dagger-shaped cantilever has been deemed more suitable for the manipulation of biological particles.

Globalization in the pharmaceutical industry, Part II.

Science.gov (United States)

Casadio Tarabusi, C; Vickery, G

1998-01-01

This is the second of a two-part report on the pharmaceutical industry. Part II begins with a discussion of foreign direct investment and inter-firm networks, which covers international mergers, acquisitions, and minority participation; market shares of foreign-controlled firms; international collaboration agreements (with a special note on agreements in biotechnology); and licensing agreements. The final section of the report covers governmental policies on health and safety regulation, price regulation, industry and technology, trade, foreign investment, protection of intellectual property, and competition.

The effect of part-time sick leave for employees with mental disorders

DEFF Research Database (Denmark)

Høgelund, Jan; Holm, Anders

reduces the duration until employees with mental disorders end their sick leave by reporting ready for returning to regular working hours. The programme allows fully sick-listed employees to resume work at reduced hours. When the sick-listed employee’s health improves, working hours are increased until...... the employee is able to work regular hours. We use combined survey and register data about 226 long-term sick-listed employees with mental disorders and 638 employees with physical disorders. Our analyses show that part-time sick-listing significantly reduces the duration until returning to regular working...... hours for employees with physical disorders. In contrast, we find that part-time sick-listing does not reduce durations for employees with mental disorders. The analyses also illustrate the importance of adjusting for unobserved differences between part-time sick-listed and full-time sick...

Ground-water flow directions and estimation of aquifer hydraulic properties in the lower Great Miami River Buried Valley aquifer system, Hamilton Area, Ohio

Science.gov (United States)

Sheets, Rodney A.; Bossenbroek, Karen E.

2005-01-01

The Great Miami River Buried Valley Aquifer System is one of the most productive sources of potable water in the Midwest, yielding as much as 3,000 gallons per minute to wells. Many water-supply wells tapping this aquifer system are purposely placed near rivers to take advantage of induced infiltration from the rivers. The City of Hamilton's North Well Field consists of 10 wells near the Great Miami River, all completed in the lower Great Miami River Buried Valley Aquifer System. A well-drilling program and a multiple-well aquifer test were done to investigate ground-water flow directions and to estimate aquifer hydraulic properties in the lower part of the Great Miami River Buried Valley Aquifer System. Descriptions of lithology from 10 well borings indicate varying amounts and thickness of clay or till, and therefore, varying levels of potential aquifer confinement. Borings also indicate that the aquifer properties can change dramatically over relatively short distances. Grain-size analyses indicate an average bulk hydraulic conductivity value of aquifer materials of 240 feet per day; the geometric mean of hydraulic conductivity values of aquifer material was 89 feet per day. Median grain sizes of aquifer material and clay units were 1.3 millimeters and 0.1 millimeters, respectively. Water levels in the Hamilton North Well Field are affected by stream stage in the Great Miami River and barometric pressure. Bank storage in response to stream stage is evident. Results from a multiple-well aquifer test at the well field indicate, as do the lithologic descriptions, that the aquifer is semiconfined in some areas and unconfined in others. Transmissivity and storage coefficient of the semiconfined part of the aquifer were 50,000 feet squared per day and 5x10-4, respectively. The average hydraulic conductivity (450 feet per day) based on the aquifer test is reasonable for glacial outwash but is higher than calculated from grain-size analyses, implying a scale effect

Determinants Of Consumers’ Satisfaction and Acceptance of Direct Selling

OpenAIRE

Alturas, Bráulio; Santos, Maria da Conceição; Pereira, Ivo

2005-01-01

This paper studies the factors that influence the consumers’ satisfaction and acceptance of direct selling. Direct selling has been exhibiting in the last decade substantial growth in sales revenues and number of salespeople involved. Also the acceptance on the part of the consumers has been increasing; in spite of they show more and more demanding and informed. The literature reveals that the relationship between customer satisfaction and direct selling has not been sufficiently studied, yet...

Cycle O(CY1991) NLS trade studies and analyses report. Book 2, part 2: Propulsion

Science.gov (United States)

Cronin, R.; Werner, M.; Bonson, S.; Spring, R.; Houston, R.

1992-01-01

This report documents the propulsion system tasks performed in support of the National Launch System (NLS) Cycle O preliminary design activities. The report includes trades and analyses covering the following subjects: (1) Maximum Tank Stretch Study; (2) No LOX Bleed Performance Analysis; (3) LOX Bleed Trade Study; (4) LO2 Tank Pressure Limits; (5) LOX Tank Pressurization System Using Helium; (6) Space Transportation Main Engine (STME) Heat Exchanger Performance; (7) LH2 Passive Recirculation Performance Analysis; (8) LH2 Bleed/Recirculation Study; (9) LH2 Tank Pressure Limits; and (10) LH2 Pressurization System. For each trade study an executive summary and a detailed trade study are provided. For the convenience of the reader, a separate section containing a compilation of only the executive summaries is also provided.

Direct and indirect associations between social anxiety and nicotine dependence and cessation problems: multiple mediator analyses.

Science.gov (United States)

Buckner, Julia D; Farris, Samantha G; Schmidt, Norman B; Zvolensky, Michael J

2014-06-01

Little empirical work has evaluated why socially anxious smokers are especially vulnerable to more severe nicotine dependence and cessation failure. Presumably, these smokers rely on cigarettes to help them manage their chronically elevated negative affect elicited by a wide array of social contexts. The current study examined the direct and indirect effects of social anxiety cross-sectionally in regard to a range of smoking processes among 466 treatment-seeking smokers. Negative affect and negative affect reduction motives were examined as mediators of the relations of social anxiety with nicotine dependence and cessation problems. Social anxiety was directly and robustly associated with perceived barriers to smoking cessation and problems experienced during past quit attempts. Social anxiety was also associated with greater nicotine dependence and smoking inflexibility indirectly through negative affect and negative affect smoking motives. Negative affect and smoking to reduce negative affect mediated these relations. These findings document the important role of negative affect and negative affect reduction motives in the relationships of social anxiety with nicotine dependence and cessation problems.

Advanced exergy-based analyses applied to a system including LNG regasification and electricity generation

Energy Technology Data Exchange (ETDEWEB)

Morosuk, Tatiana; Tsatsaronis, George; Boyano, Alicia; Gantiva, Camilo [Technische Univ. Berlin (Germany)

2012-07-01

Liquefied natural gas (LNG) will contribute more in the future than in the past to the overall energy supply in the world. The paper discusses the application of advanced exergy-based analyses to a recently developed LNG-based cogeneration system. These analyses include advanced exergetic, advanced exergoeconomic, and advanced exergoenvironmental analyses in which thermodynamic inefficiencies (exergy destruction), costs, and environmental impacts have been split into avoidable and unavoidable parts. With the aid of these analyses, the potentials for improving the thermodynamic efficiency and for reducing the overall cost and the overall environmental impact are revealed. The objectives of this paper are to demonstrate (a) the potential for generating electricity while regasifying LNG and (b) some of the capabilities associated with advanced exergy-based methods. The most important subsystems and components are identified, and suggestions for improving them are made. (orig.)

Economic analyses in health care: an introduction to the methodology with an emphasis on radiation therapy

International Nuclear Information System (INIS)

Hayman, James; Weeks, Jane; Mauch, Peter

1996-01-01

Payers are increasingly interested in knowing whether they are receiving value for the dollars they spend on health care. Because economic analyses will be used as a means of evaluating radiation therapy, it is important that radiation oncologists understand the basic methodology employed in such analyses. This review article describes the four basic types of economic analyses: cost minimization, cost effectiveness, cost utility, and cost benefit. Specification of alternative therapies, choice of perspective of the analysis, measurements of costs and benefits, and the role of discounting and sensitivity analyses are discussed. Published economic analyses that pertain directly to treatment with radiation therapy are reviewed. Finally, we close with a brief discussion of the potential areas for future economic outcomes research in radiation oncology

Analysing passenger arrivals rates and waiting time at bus stops

OpenAIRE

Kaparias, I.; Rossetti, C.; Trozzi, V.

2015-01-01

The present study investigates the rather under-explored topic of passenger waiting times at public transport facilities. Using data collected from part of London’s bus network by means of physical counts, measurements and observations, and complemented by on-site passenger interviews, the waiting behaviour is analysed for a number of bus stops served by different numbers of lines. The analysis employs a wide range of statistical methods and tools, and concentrates on three aspects: passenger...

A self-interacting partially directed walk subject to a force

Energy Technology Data Exchange (ETDEWEB)

Brak, R; Owczarek, A L [Department of Mathematics and Statistics, University of Melbourne, Parkville, Victoria 3010 (Australia); Dyke, P; Lee, J; Whittington, S G [Department of Chemistry, University of Toronto, Toronto M5S 3H6 (Canada); Prellberg, T [School of Mathematical Sciences, Queen Mary, University of London, Mile End Road, London E1 4NS (United Kingdom); Rechnitzer, A [Department of Mathematics, University of British Columbia, Vancouver V6K 1ZT (Canada)

2009-02-27

We consider a directed walk model of a homopolymer (in two dimensions) which is self-interacting and can undergo a collapse transition, subject to an applied tensile force. We review and interpret all the results already in the literature concerning the case where this force is in the preferred direction of the walk. We consider the force extension curves at different temperatures as well as the critical-force temperature curve. We demonstrate that this model can be analysed rigorously for all key quantities of interest even when there may not be explicit expressions for these quantities available. We show which of the techniques available can be extended to the full model, where the force has components in the preferred direction and the direction perpendicular to this. Whilst the solution of the generating function is available, its analysis is far more complicated and not all the rigorous techniques are available. However, many results can be extracted including the location of the critical point which gives the general critical-force temperature curve. Lastly, we generalize the model to a three-dimensional analogue and show that several key properties can be analysed if the force is restricted to the plane of preferred directions.

Accounting for rate variation among lineages in comparative demographic analyses

Science.gov (United States)

Hope, Andrew G.; Ho, Simon Y. W.; Malaney, Jason L.; Cook, Joseph A.; Talbot, Sandra L.

2014-01-01

Genetic analyses of contemporary populations can be used to estimate the demographic histories of species within an ecological community. Comparison of these demographic histories can shed light on community responses to past climatic events. However, species experience different rates of molecular evolution, and this presents a major obstacle to comparative demographic analyses. We address this problem by using a Bayesian relaxed-clock method to estimate the relative evolutionary rates of 22 small mammal taxa distributed across northwestern North America. We found that estimates of the relative molecular substitution rate for each taxon were consistent across the range of sampling schemes that we compared. Using three different reference rates, we rescaled the relative rates so that they could be used to estimate absolute evolutionary timescales. Accounting for rate variation among taxa led to temporal shifts in our skyline-plot estimates of demographic history, highlighting both uniform and idiosyncratic evolutionary responses to directional climate trends for distinct ecological subsets of the small mammal community. Our approach can be used in evolutionary analyses of populations from multiple species, including comparative demographic studies.

Electron microscopy analyses and electrical properties of the layered Bi{sub 2}WO{sub 6} phase

Energy Technology Data Exchange (ETDEWEB)

Taoufyq, A. [Institut Matériaux Microélectronique et Nanosciences de Provence, IM2NP, UMR CNRS 7334, Université du Sud Toulon-Var, BP 20132, 83957, La Garde Cedex (France); Laboratoire Matériaux et Environnement LME, Faculté des Sciences, Université Ibn Zohr, BP 8106, Cité Dakhla, Agadir, Maroc (Morocco); Département d‘Études des Réacteurs, Laboratoire Dosimétrie Capteurs Instrumentation, CEA Cadarache (France); Société CESIGMA—Signals and Systems, 1576 Chemin de La Planquette, F 83 130 LA GARDE (France); Ait Ahsaine, H. [Laboratoire Matériaux et Environnement LME, Faculté des Sciences, Université Ibn Zohr, BP 8106, Cité Dakhla, Agadir, Maroc (Morocco); Patout, L. [Institut Matériaux Microélectronique et Nanosciences de Provence, IM2NP, UMR CNRS 7334, Université du Sud Toulon-Var, BP 20132, 83957, La Garde Cedex (France); Benlhachemi, A.; Ezahri, M. [Laboratoire Matériaux et Environnement LME, Faculté des Sciences, Université Ibn Zohr, BP 8106, Cité Dakhla, Agadir, Maroc (Morocco); and others

2013-07-15

The bismuth tungstate Bi{sub 2}WO{sub 6} was synthesized using a classical coprecipitation method followed by a calcination process at different temperatures. The samples were characterized by X-ray diffraction, simultaneous thermogravimetry and differential thermal analysis (TGA/DTA), scanning and transmission electron microscopy (SEM, TEM) analyses. The Rietveld analysis and electron diffraction clearly confirmed the Pca2{sub 1} non centrosymmetric space group previously proposed for this phase. The layers Bi{sub 2}O{sub 2}{sup 2+} and WO{sub 4}{sup 2−} have been directly evidenced from the HRTEM images. The electrical properties of Bi{sub 2}WO{sub 6} compacted pellets systems were determined from electrical impedance spectrometry (EIS) and direct current (DC) analyses, under air and argon, between 350 and 700 °C. The direct current analyses showed that the conduction observed from EIS analyses was mainly ionic in this temperature range, with a small electronic contribution. Electrical change above the transition temperature of 660 °C is observed under air and argon atmospheres. The strong conductivity increase observed under argon is interpreted in terms of formation of additional oxygen vacancies coupled with electron conduction. - Graphical abstract: High resolution transmission electron microscopy: inverse fast Fourier transform giving the layered structure of the Bi{sub 2}WO{sub 6} phase, with a representation of the cell dimensions (b and c vectors). The Bi{sub 2}O{sub 2}{sup 2+} and WO{sub 4}{sup 2−} sandwiches are visible in the IFFT image. - Highlights: • Using transmission electron microscopy, we visualize the layered structure of Bi{sub 2}WO{sub 6}. • Electrical analyses under argon gas show some increase in conductivity. • The phase transition at 660 °C is evidenced from electrical modification.

Issues Related to the Frequency of Exploratory Analyses by Evidence Review Groups in the NICE Single Technology Appraisal Process.

Science.gov (United States)

Kaltenthaler, Eva; Carroll, Christopher; Hill-McManus, Daniel; Scope, Alison; Holmes, Michael; Rice, Stephen; Rose, Micah; Tappenden, Paul; Woolacott, Nerys

2017-06-01

Evidence Review Groups (ERGs) critically appraise company submissions as part of the National Institute for Health and Care Excellence (NICE) Single Technology Appraisal (STA) process. As part of their critique of the evidence submitted by companies, the ERGs undertake exploratory analyses to explore uncertainties in the company's model. The aim of this study was to explore pre-defined factors that might influence or predict the extent of ERG exploratory analyses. The aim of this study was to explore predefined factors that might influence or predict the extent of ERG exploratory analyses. We undertook content analysis of over 400 documents, including ERG reports and related documentation for the 100 most recent STAs (2009-2014) for which guidance has been published. Relevant data were extracted from the documents and narrative synthesis was used to summarise the extracted data. All data were extracted and checked by two researchers. Forty different companies submitted documents as part of the NICE STA process. The most common disease area covered by the STAs was cancer (44%), and most ERG reports (n = 93) contained at least one exploratory analysis. The incidence and frequency of ERG exploratory analyses does not appear to be related to any developments in the appraisal process, the disease area covered by the STA, or the company's base-case incremental cost-effectiveness ratio (ICER). However, there does appear to be a pattern in the mean number of analyses conducted by particular ERGs, but the reasons for this are unclear and potentially complex. No clear patterns were identified regarding the presence or frequency of exploratory analyses, apart from the mean number conducted by individual ERGs. More research is needed to understand this relationship.

A real-time transfer function analyser program for PFR

International Nuclear Information System (INIS)

McWilliam, D.

1980-03-01

A transfer function analyser software package has been produced which is believed to constitute a significant advance over others reported in the literature. The main advantages of the system are its operating speed, especially at low frequencies, which is due to its use of part-cycle integration and its high degree of interactive operator control. The driving sine wave, the return signals and the computed vector diagrams are displayed on TV type visual display units. Data output is by means of an incremental graph plotter or an IBM typewriter. (author)

Probabilistic analyses of failure in reactor coolant piping

International Nuclear Information System (INIS)

Holman, G.S.

1984-01-01

LLNL is performing probabilistic reliability analyses of PWR and BWR reactor coolant piping for the NRC Office of Nuclear Regulatory Research. Specifically, LLNL is estimating the probability of a double-ended guillotine break (DEGB) in the reactor coolant loop piping in PWR plants, and in the main stream, feedwater, and recirculation piping of BWR plants. In estimating the probability of DEGB, LLNL considers two causes of pipe break: pipe fracture due to the growth of cracks at welded joints (direct DEGB), and pipe rupture indirectly caused by the seismically-induced failure of critical supports or equipment (indirect DEGB)

Multigene analyses resolve early diverging lineages in the Rhodymeniophycidae (Florideophyceae, Rhodophyta).

Science.gov (United States)

Saunders, Gary W; Filloramo, Gina; Dixon, Kyatt; Le Gall, Line; Maggs, Christine A; Kraft, Gerald T

2016-08-01

Multigene phylogenetic analyses were directed at resolving the earliest divergences in the red algal subclass Rhodymeniophycidae. The inclusion of key taxa (new to science and/or previously lacking molecular data), additional sequence data (SSU, LSU, EF2, rbcL, COI-5P), and phylogenetic analyses removing the most variable sites (site stripping) have provided resolution for the first time at these deep nodes. The earliest diverging lineage within the subclass was the enigmatic Catenellopsis oligarthra from New Zealand (Catenellopsidaceae), which is here placed in the Catenellopsidales ord. nov. In our analyses, Atractophora hypnoides was not allied with the other included Bonnemaisoniales, but resolved as sister to the Peyssonneliales, and is here assigned to Atractophoraceae fam. nov. in the Atractophorales ord. nov. Inclusion of Acrothesaurum gemellifilum gen. et sp. nov. from Tasmania has greatly improved our understanding of the Acrosymphytales, to which we assign three families, the Acrosymphytaceae, Acrothesauraceae fam. nov. and Schimmelmanniaceae fam. nov. © 2016 Phycological Society of America.

Subgroup analyses in randomised controlled trials: cohort study on trial protocols and journal publications.

Science.gov (United States)

Kasenda, Benjamin; Schandelmaier, Stefan; Sun, Xin; von Elm, Erik; You, John; Blümle, Anette; Tomonaga, Yuki; Saccilotto, Ramon; Amstutz, Alain; Bengough, Theresa; Meerpohl, Joerg J; Stegert, Mihaela; Olu, Kelechi K; Tikkinen, Kari A O; Neumann, Ignacio; Carrasco-Labra, Alonso; Faulhaber, Markus; Mulla, Sohail M; Mertz, Dominik; Akl, Elie A; Bassler, Dirk; Busse, Jason W; Ferreira-González, Ignacio; Lamontagne, Francois; Nordmann, Alain; Gloy, Viktoria; Raatz, Heike; Moja, Lorenzo; Rosenthal, Rachel; Ebrahim, Shanil; Vandvik, Per O; Johnston, Bradley C; Walter, Martin A; Burnand, Bernard; Schwenkglenks, Matthias; Hemkens, Lars G; Bucher, Heiner C; Guyatt, Gordon H; Briel, Matthias

2014-07-16

To investigate the planning of subgroup analyses in protocols of randomised controlled trials and the agreement with corresponding full journal publications. Cohort of protocols of randomised controlled trial and subsequent full journal publications. Six research ethics committees in Switzerland, Germany, and Canada. 894 protocols of randomised controlled trial involving patients approved by participating research ethics committees between 2000 and 2003 and 515 subsequent full journal publications. Of 894 protocols of randomised controlled trials, 252 (28.2%) included one or more planned subgroup analyses. Of those, 17 (6.7%) provided a clear hypothesis for at least one subgroup analysis, 10 (4.0%) anticipated the direction of a subgroup effect, and 87 (34.5%) planned a statistical test for interaction. Industry sponsored trials more often planned subgroup analyses compared with investigator sponsored trials (195/551 (35.4%) v 57/343 (16.6%), P<0.001). Of 515 identified journal publications, 246 (47.8%) reported at least one subgroup analysis. In 81 (32.9%) of the 246 publications reporting subgroup analyses, authors stated that subgroup analyses were prespecified, but this was not supported by 28 (34.6%) corresponding protocols. In 86 publications, authors claimed a subgroup effect, but only 36 (41.9%) corresponding protocols reported a planned subgroup analysis. Subgroup analyses are insufficiently described in the protocols of randomised controlled trials submitted to research ethics committees, and investigators rarely specify the anticipated direction of subgroup effects. More than one third of statements in publications of randomised controlled trials about subgroup prespecification had no documentation in the corresponding protocols. Definitive judgments regarding credibility of claimed subgroup effects are not possible without access to protocols and analysis plans of randomised controlled trials. © The DISCO study group 2014.

Confining multiple polymers between sticky walls: a directed walk model of two polymers

International Nuclear Information System (INIS)

Wong, Thomas; Rechnitzer, Andrew; Owczarek, Aleksander L

2014-01-01

We study a model of two polymers confined to a slit with sticky walls. More precisely, we find and analyse the exact solution of two directed friendly walks in such a geometry on the square lattice. We compare the infinite slit limit, in which the length of the polymer (thermodynamic limit) is taken to infinity before the width of the slit is considered to become large, to the opposite situation where the order of the limits are swapped, known as the half-plane limit when one polymer is modelled. In contrast with the single polymer system we find that the half-plane and infinite slit limits coincide. We understand this result in part due to the tethering of polymers on both walls of the slit. We also analyse the entropic force exerted by the polymers on the walls of the slit. Again the results differ significantly from single polymer models. In a single polymer system both attractive and repulsive regimes were seen, whereas in our two walk model only repulsive forces are observed. We do, however, see that the range of the repulsive force is dependent on the parameter values. This variation can be explained by the adsorption of the walks on opposite walls of the slit. (paper)

Publication bias in dermatology systematic reviews and meta-analyses.

Science.gov (United States)

Atakpo, Paul; Vassar, Matt

2016-05-01

Systematic reviews and meta-analyses in dermatology provide high-level evidence for clinicians and policy makers that influence clinical decision making and treatment guidelines. One methodological problem with systematic reviews is the under representation of unpublished studies. This problem is due in part to publication bias. Omission of statistically non-significant data from meta-analyses may result in overestimation of treatment effect sizes which may lead to clinical consequences. Our goal was to assess whether systematic reviewers in dermatology evaluate and report publication bias. Further, we wanted to conduct our own evaluation of publication bias on meta-analyses that failed to do so. Our study considered systematic reviews and meta-analyses from ten dermatology journals from 2006 to 2016. A PubMed search was conducted, and all full-text articles that met our inclusion criteria were retrieved and coded by the primary author. 293 articles were included in our analysis. Additionally, we formally evaluated publication bias in meta-analyses that failed to do so using trim and fill and cumulative meta-analysis by precision methods. Publication bias was mentioned in 107 articles (36.5%) and was formally evaluated in 64 articles (21.8%). Visual inspection of a funnel plot was the most common method of evaluating publication bias. Publication bias was present in 45 articles (15.3%), not present in 57 articles (19.5%) and not determined in 191 articles (65.2%). Using the trim and fill method, 7 meta-analyses (33.33%) showed evidence of publication bias. Although the trim and fill method only found evidence of publication bias in 7 meta-analyses, the cumulative meta-analysis by precision method found evidence of publication bias in 15 meta-analyses (71.4%). Many of the reviews in our study did not mention or evaluate publication bias. Further, of the 42 articles that stated following PRISMA reporting guidelines, 19 (45.2%) evaluated for publication bias. In

Methods for direct measurement of the plasma potential

DEFF Research Database (Denmark)

Andersen, S. A.; Christoffersen, G. B.; Jensen, Vagn Orla

1972-01-01

Reports on a simple experimental technique which can be used for determination of the plasma where the plasma potential prevails; these ions are accepted by the analyser plate when phi c= phi pl. Part of this technique has been used by Andersen, Jensen, Michelsen and Nielsen (1971) in measurements...

Residual stress determination of direct metal laser sintered (DMLS) inconel specimens and parts

Energy Technology Data Exchange (ETDEWEB)

Watkins, Thomas R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Unocic, Kinga A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Maziasz, Philip J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bunn, Jeffrey R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Fancher, Christopher M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Peralta, Alonso [Honeywell Aerospace, Phoenix, AZ (United States); Sundarraj, Suresh [Honeywell Aerospace, Phoenix, AZ (United States); Neumann, James [Honeywell Aerospace, Phoenix, AZ (United States)

2018-01-01

Residual stress determinations and microstructural studies were performed on a series of Inconel 718Plus prisms built using Direct Metal Laser Sintering (DMLS) at Honeywell Aerospace (hereafter also referred to as Honeywell). The results are being used to validate and improve existing models at Honeywell, and ultimately will expedite the implementation of DMLS throughout various industrial sectors (automotive, biomedical, etc.).

Numerical analyses of an aircraft crash on containment building

Energy Technology Data Exchange (ETDEWEB)

Sim, Jae Min; Kim, Seung Hyun; Chang, Yoon Suk [Kyunghee University, Yongin (Korea, Republic of)

2016-05-15

The containment building is responsible to isolate and protect internal devices against external conditions like earthquake, hurricane and impact loading. It has also to protect leakage of radioactivity, like LOCA (Loss Of Coolant Accident), when severe accidents occurred. Meanwhile, social awareness such as terrorism has been increased globally after international aircraft crashes at World Trade Center and Pentagon. In this paper, FE (Finite Element) analyses according to variation of crash locations and speeds were carried out to examine the aircraft crash impact on a domestic containment building. In this paper, numerical analyses of aircraft crash on NPP's containment building were performed taking into account different locations and aircraft speeds. (1) Amounts of concrete failure were dependent on the crash locations and the connector was the most delicate location comparing to the dome and wall part. (2) Maximum stress values generated at the liner plate and rebars did not exceed their UTS values.

Numerical analyses of an aircraft crash on containment building

International Nuclear Information System (INIS)

Sim, Jae Min; Kim, Seung Hyun; Chang, Yoon Suk

2016-01-01

The containment building is responsible to isolate and protect internal devices against external conditions like earthquake, hurricane and impact loading. It has also to protect leakage of radioactivity, like LOCA (Loss Of Coolant Accident), when severe accidents occurred. Meanwhile, social awareness such as terrorism has been increased globally after international aircraft crashes at World Trade Center and Pentagon. In this paper, FE (Finite Element) analyses according to variation of crash locations and speeds were carried out to examine the aircraft crash impact on a domestic containment building. In this paper, numerical analyses of aircraft crash on NPP's containment building were performed taking into account different locations and aircraft speeds. (1) Amounts of concrete failure were dependent on the crash locations and the connector was the most delicate location comparing to the dome and wall part. (2) Maximum stress values generated at the liner plate and rebars did not exceed their UTS values

DIRECT FOREIGN INVESTMENTS AND THE LACK OF POSITIVE EFFECTS ON THE ECONOMY

Directory of Open Access Journals (Sweden)

Suzana Djordjevic

2015-12-01

Full Text Available In recent years, Croatia was interesting to investors in attracting foreign direct investment. One of the objectives of this research was to deal with their negative effects. Most of invested capital was invested in brownfield investments, i.e. in taking over the ownership share of companies through privatization. Consequently, revenues were spent to settle financial debts and not on the growth and development of competitiveness. According to economic theory, foreign direct investments have a positive impact on the economic growth of the recipient country. This paper attempts to answer the question: ‘Is the economic theory confirmed in the Croatian case?’ The aim is to analyse the impact of foreign direct investments on the economic growth of Croatia in the period from 1999 to 2014. The paper analyses the impact that direct foreign investments had on the unemployment rate, GDP per capita and export using the model of linear regression.

Repeated sprint ability in young basketball players: one vs. two changes of direction (Part 2).

Science.gov (United States)

Attene, Giuseppe; Laffaye, Guillaume; Chaouachi, Anis; Pizzolato, Fabio; Migliaccio, Gian Mario; Padulo, Johnny

2015-01-01

The aim of this study was to compare the training effects based on repeated sprint ability (RSA) (with one change of direction) with an intensive repeated sprint ability (IRSA) (with two changes of direction) on jump performance and aerobic fitness. Eighteen male basketball players were assigned to repeated sprint ability and intensive repeated sprint ability training groups (RSAG and IRSAG). RSA, IRSA, squat jump (SJ), countermovement jump (CMJ) and Yo-Yo intermittent recovery level 1 test were assessed before and after four training weeks. The RSA and IRSA trainings consisted of three sets of six sprints (first two weeks) and eight sprints (second two weeks) with 4-min sets recovery and 20-s of sprints recovery. Four weeks of training led to an overall improvement in most of the measures of RSA, but little evidence of any differences between the two training modes. Jump performance was enhanced: CMJ of 7.5% (P training with one/two changes of direction promotes improvements in both RSA and IRSA respectively but the better increase on jump performance shown a few changes on sprint and endurance performances.

Applicability of the Directed Graph Methodology

Energy Technology Data Exchange (ETDEWEB)

Huszti, Jozsef [Institute of Isotope of the Hungarian Academy of Sciences, Budapest (Hungary); Nemeth, Andras [ESRI Hungary, Budapest (Hungary); Vincze, Arpad [Hungarian Atomic Energy Authority, Budapest (Hungary)

2012-06-15

Possible methods to construct, visualize and analyse the 'map' of the State's nuclear infrastructure based on different directed graph approaches are proposed. The transportation and the flow network models are described in detail. The use of the possible evaluation methodologies and the use of available software tools to construct and maintain the nuclear 'map' using pre-defined standard building blocks (nuclear facilities) are introduced and discussed.

Trunk muscle cocontraction: the effects of moment direction and moment magnitude.

Science.gov (United States)

Lavender, S A; Tsuang, Y H; Andersson, G B; Hafezi, A; Shin, C C

1992-09-01

This study investigated the cocontraction of eight trunk muscles during the application of asymmetric loads to the torso. External moments of 10, 20, 30, 40, and 50 Nm were applied to the torso via a harness system. The direction of the applied moment was varied by 30 degrees increments to the subjects' right side between the sagittally symmetric orientations front and rear. Electromyographic (EMG) data from the left and right latissimus dorsi, erector spinae, external oblique, and rectus abdominus were collected from 10 subjects. The normalized EMG data were tested using multivariate and univariate analyses of variance procedures. These analyses showed significant interactions between the moment magnitude and the moment direction for seven of the eight muscles. Most of the interactions could be characterized as due to changes in muscle recruitment with changes in the direction of the external moment. Analysis of the relative activation levels, which were computed for each combination of moment magnitude and direction, indicated large changes in muscle recruitment due to asymmetry, but only small adjustments in the relative activation levels due to increased moment magnitude.

Annual report 2005 General Direction of the Energy and raw materials; Rapport annuel 2005 Direction Generale de L'Energie et des Matieres Premieres

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This 2005 annual report of the DGEMP (General Direction of the Energy and the raw Materials), takes stock on the energy bill and accounting of the France. The first part presents the electric power, natural gas and raw materials market in France. The second part is devoted to the diversification of the energy resources with a special attention to the renewable energies and the nuclear energy. The third part discusses the energy and raw materials prices and the last part presents the international cooperation in the energy domain. (A.L.B.)

Some stream waters of the Western United States, with chapters on sediment carried by the Rio Grande and the industrial application of water analyses

Science.gov (United States)

Stabler, Herman

1911-01-01

A systematic study of the waters likely to be utilized on the Reclamation Service projects was made in order to determine the influence of the salinity of the waters on the growth of vegetation and the effect of suspended matter in silting canals and reservoirs. The work was begun early in 1905, under the direction of Thomas H. Means, engineer, and was continued during 1906 and until May, 1907, under the direction of W. H. Heileman, engineer. The analyses were made in a laboratory established at quarters provided by the University of California at Berkeley, Cal., by C. H. Stone, P. L. McCreary, F. M. Eaton, O. J. Hawley, W. C. Riddell, F. T. Berry, H. A. Burns, J. H. Hampson, J. A. Pearce, and M. Vaygouny, the greater part of the work being that of the first five named. C. H. Stone was chemist in charge at the beginning of the investigations and is chiefly responsible for the plan of the analytical work and the methods of analysis.The results of the investigations were prepared for publication under instructions from F. H. Newell, Director of the United States Reclamation Service, by Herman Stabler, assistant engineer, who assembled and checked- the analyses, compiled the accompanying stream-flow data from records of the United States Geological Survey, and computed daily discharge of suspended matter and dissolved solids, under the supervision of D. W. Murphy, engineer in charge of Washington office engineering.

Part-load performance of a high temperature Kalina cycle

International Nuclear Information System (INIS)

Modi, Anish; Andreasen, Jesper Graa; Kærn, Martin Ryhl; Haglind, Fredrik

2015-01-01

Highlights: • Detailed algorithm to solve high temperature Kalina cycle in part load. • A central receiver concentrating solar power plant with direct vapour generation considered as case study. • Part-load performance curves and fitted equations presented. - Abstract: The Kalina cycle has recently seen increased interest as an alternative to the conventional steam Rankine cycle. The cycle has been studied for use with both low and high temperature applications such as geothermal power plants, ocean thermal energy conversion, waste heat recovery, gas turbine bottoming cycle, and solar power plants. The high temperature cycle layouts are inherently more complex than the low temperature layouts due to the presence of a distillation-condensation subsystem, three pressure levels, and several heat exchangers. This paper presents a detailed approach to solve the Kalina cycle in part-load operating conditions for high temperature (a turbine inlet temperature of 500 °C) and high pressure (100 bar) applications. A central receiver concentrating solar power plant with direct vapour generation is considered as a case study where the part-load conditions are simulated by changing the solar heat input to the receiver. Compared with the steam Rankine cycle, the Kalina cycle has an additional degree of freedom in terms of the ammonia mass fraction which can be varied in order to maximize the part-load efficiency of the cycle. The results include the part-load curves for various turbine inlet ammonia mass fractions and the fitted equations for these curves.

A comparison between geostatistical analyses and sedimentological studies at the Hartbeestfontien gold mine

International Nuclear Information System (INIS)

Magri, E.J.

1978-01-01

For life-of-mine planning, as well as for short- and medium-term planning of grades and mine layouts, it is extremely important to have a clear understanding of the patterns followed by the distribution of gold and uranium within the mining area. This study is an attempt to reconcile the geostatistical approach to the determination of ore-shoot directions, via an analysis of the spatial distribution of gold and uranium values, with the sedimentological approach, which is based on the direct measurement of geological features. For the routine geostatistical estimation of ore reserves, the Hartebeestfontein gold mine was divided into ll sections. In each of these sections, the ore-shoot directions were calculated for gold and uranium from the anisotropies disclosed by geostatistical variogram analyses. This study presents a comparison of these results with those obtained from direct geological measurements of paleo-current directions. The results suggest that geological and geostatistical studies could be of significant mutual benefit [af

Seminal vesicle intrafraction motion analysed with cinematic magnetic resonance imaging

International Nuclear Information System (INIS)

Gill, Suki; Dang, Kim; Fox, Chris; Bressel, Mathias; Kron, Tomas; Bergen, Noelene; Ferris, Nick; Owen, Rebecca; Chander, Sarat; Tai, Keen Hun; Foroudi, Farshad

2014-01-01

This study analyses seminal vesicle displacement relative to the prostate and in relation to treatment time. A group of eleven patients undergoing prostate cancer radiotherapy were imaged with a continuous 3 T cine-MRI in the standard treatment setup position. Four images were recorded every 4 seconds for 15 minutes in the sagittal plane and every 6.5 seconds for 12 minutes in the coronal plane. The prostate gland and seminal vesicles were contoured on each MRI image. The coordinates of the centroid of the prostate and seminal vesicles on each image was analysed for displacement against time. Displacements between the 2.5 percentile and 97.5 percentile (i.e. the 2.5% trimmed range) for prostate and seminal vesicle centroid displacements were measured for 3, 5, 10 and 15 minutes time intervals in the anterior-posterior (AP), left-right (LR) and superior-inferior (SI) directions. Real time prostate and seminal vesicle displacement was compared for individual patients. The 2.5% trimmed range for 3, 5, 10 and 15 minutes for the seminal vesicle centroids in the SI direction measured 4.7 mm; 5.8 mm; 6.5 mm and 7.2 mm respectively. In the AP direction, it was 4.0 mm, 4.5 mm, 6.5 mm, and 7.0 mm. In the LR direction for 3, 5 and 10 minutes; for the left seminal vesicle, it was 2.7 mm, 2.8 mm, 3.4 mm and for the right seminal vesicle, it was 3.4 mm, 3.3 mm, and 3.4 mm. The correlation between the real-time prostate and seminal vesicle displacement varied substantially between patients indicating that the relationship between prostate displacement and seminal vesicles displacement is patient specific with the majority of the patients not having a strong relationship. Our study shows that seminal vesicle motion increases with treatment time, and that the prostate and seminal vesicle centroids do not move in unison in real time, and that an additional margin is required for independent seminal vesicle motion if treatment localisation is to the prostate

CAD Parts-Based Assembly Modeling by Probabilistic Reasoning

KAUST Repository

Zhang, Kai-Ke

2016-04-11

Nowadays, increasing amount of parts and sub-assemblies are publicly available, which can be used directly for product development instead of creating from scratch. In this paper, we propose an interactive design framework for efficient and smart assembly modeling, in order to improve the design efficiency. Our approach is based on a probabilistic reasoning. Given a collection of industrial assemblies, we learn a probabilistic graphical model from the relationships between the parts of assemblies. Then in the modeling stage, this probabilistic model is used to suggest the most likely used parts compatible with the current assembly. Finally, the parts are assembled under certain geometric constraints. We demonstrate the effectiveness of our framework through a variety of assembly models produced by our prototype system. © 2015 IEEE.

CAD Parts-Based Assembly Modeling by Probabilistic Reasoning

KAUST Repository

Zhang, Kai-Ke; Hu, Kai-Mo; Yin, Li-Cheng; Yan, Dongming; Wang, Bin

2016-01-01

Nowadays, increasing amount of parts and sub-assemblies are publicly available, which can be used directly for product development instead of creating from scratch. In this paper, we propose an interactive design framework for efficient and smart assembly modeling, in order to improve the design efficiency. Our approach is based on a probabilistic reasoning. Given a collection of industrial assemblies, we learn a probabilistic graphical model from the relationships between the parts of assemblies. Then in the modeling stage, this probabilistic model is used to suggest the most likely used parts compatible with the current assembly. Finally, the parts are assembled under certain geometric constraints. We demonstrate the effectiveness of our framework through a variety of assembly models produced by our prototype system. © 2015 IEEE.

Farm Management: rethinking directions?

OpenAIRE

Kemp, David R.; Girdwood, John; Parton, Kevin A.; Charry, Al A.

2004-01-01

Farms and farming are major contributors to the world economy, directly responsible for a large part of GDP. These achievements are not trivial and imply that farms are being managed in reasonably effective ways, else agricultural industries would not be sustained. However has the study of Farm Management within Australia made significant contributions to agriculture or lagged in the background. Is it contributing to better Farm Management or merely cataloguing what has happened? Is it leadin...

Less is less: a systematic review of graph use in meta-analyses.

Science.gov (United States)

Schild, Anne H E; Voracek, Martin

2013-09-01

Graphs are an essential part of scientific communication. Complex datasets, of which meta-analyses are textbook examples, benefit the most from visualization. Although a number of graph options for meta-analyses exist, the extent to which these are used was hitherto unclear. A systematic review on graph use in meta-analyses in three disciplines (medicine, psychology, and business) and nine journals was conducted. Interdisciplinary differences, which are mirrored in the respective journals, were revealed, that is, graph use correlates with external factors rather than methodological considerations. There was only limited variation in graph types (with forest plots as the most important representatives), and diagnostic plots were very rare. Although an increase in graph use over time could be observed, it is unlikely that this phenomenon is specific to meta-analyses. There is a gaping discrepancy between available graphic methods and their application in meta-analyses. This may be rooted in a number of factors, namely, (i) insufficient dissemination of new developments, (ii) unsatisfactory implementation in software packages, and (iii) minor attention on graphics in meta-analysis reporting guidelines. Using visualization methods to their full capacity is a further step in using meta-analysis to its full potential. Copyright © 2013 John Wiley & Sons, Ltd.

Impacts of EU carbon emission trade directive on energy-intensive industries. Indicative micro-economic analyses

International Nuclear Information System (INIS)

Lund, Peter

2007-01-01

The cost impacts from the European emission trading system (ETS) on energy-intensive manufacturing industries have been investigated. The effects consist of direct costs associated to the CO 2 reduction requirements stated in the EU Directive, and of indirect costs of comparable magnitude that originate from a higher electricity price triggered by the ETS in the power sector. The total cost impacts remain below 2% of the production value for most industries within the ETS in the Kyoto period. In the post-Kyoto phase assuming a 30% CO 2 reduction, the total cost impact may raise up to 8% of production value in the heaviest industry sectors. In steel and cement industries the cost impacts are 3-4 fold compared to the least affected pulp and paper and oil refining. Electricity-intensive industries outside the ETS will also be affected, for example in aluminum and chlorine production the indirect cost impacts from ETS could come up to 10% of production value already in the Kyoto period. As industry sectors are affected differently by the ETS some correcting mechanisms may be worthwhile to consider in securing the operation of the most electricity-intensive sectors, e.g. balancing taxation schemes that may include as income source a levy on the wind-fall profits of the power sector due to ETS. A future improvement in ETS for industries within the scheme could be scaling of the emission reduction requirement so that the relative total emission reduction costs are at about the same level. (author)

Regulatory support activities of JNES by thermal-hydraulic and safety analyses

International Nuclear Information System (INIS)

Kasahara, Fumio

2008-01-01

Current status and some related topics on regulatory support activities of Japan Nuclear Energy Safety Organization (JNES) by thermal-hydraulic and safety analyses are reported. The safety of nuclear facilities is secured primarily by plant owners and operators. However, the regulatory body NISA (Nuclear and Industrial Safety Agency) has conducted a strict regulation to confirm the adequacy of the site condition as well as the basic and detailed design. The JNES has been conducting independent analyses from applicants (audit analyses, etc.) by direction of NISA and supporting its review. In addition to the audit analysis, thermal-hydraulic and safety analyses are used in such areas as analytical evaluation for investigation of causes of accidents and troubles, level 2 PSA for risk informed regulation, etc. Recent activities of audit analyses are for the application of Tsuruga 3 and 4 (APWR), the spent fuel storage facility for the establishment, and the LMFBR Monju for the core change. For the trouble event evaluation, the criticality accident analysis of Sika1 was carried out and the evaluation of effectiveness of accident management (AM) measure for Tomari 3 (PWR) and Monju was performed. The analytical codes for these evaluations are continuously revised by reflecting the state-of-art technical information and validated using the information provided by the data from JAEA, OECD project, etc. (author)

Statistics of wind direction and its increments

International Nuclear Information System (INIS)

Doorn, Eric van; Dhruva, Brindesh; Sreenivasan, Katepalli R.; Cassella, Victor

2000-01-01

We study some elementary statistics of wind direction fluctuations in the atmosphere for a wide range of time scales (10 -4 sec to 1 h), and in both vertical and horizontal planes. In the plane parallel to the ground surface, the direction time series consists of two parts: a constant drift due to large weather systems moving with the mean wind speed, and fluctuations about this drift. The statistics of the direction fluctuations show a rough similarity to Brownian motion but depend, in detail, on the wind speed. This dependence manifests itself quite clearly in the statistics of wind-direction increments over various intervals of time. These increments are intermittent during periods of low wind speeds but Gaussian-like during periods of high wind speeds. (c) 2000 American Institute of Physics

Safety analyses of the nuclear-powered ship Mutsu with RETRAN

International Nuclear Information System (INIS)

Naruko, Y.; Ishida, T.; Tanaka, Y.; Futamura, Y.

1982-01-01

To provide a quantitative basis for the safety evaluation of the N.S. Mutsu, a number of safety analyses were performed in the course of reexamination. With respect to operational transient analyses, the RETRAN computer code was used to predict plant performances on the basis of postulated transient scenarios. The COBRA-IV computer code was also used to obtain a value of the minimum DNBR for each transient, which is necessary to predict detailed thermal-hydraulic performances in the core region of the reactor. In the present paper, the following three operational transients, which were calculated as a part of the safety analyses, are being dealt with: a complete loss of load without reactor scram; an excessive load increase incident, which is followed by a 30 percent stepwise load increase in the steam dump flow; and an accidental depressurization of the primary system, which is followed by a sudden full opening of the pressurizer spray valve. A Mutsu two-loop RETRAN model and simulation results were described. The results being compared with those of land-based PWRs, the characteristic features of the Mutsu reactor were presented and the safety of the plant under the operational transient conditions was confirmed

Pharmaceutical Advertising and Medicare Part D

Science.gov (United States)

Lakdawalla, Darius; Sood, Neeraj; Gu, Qian

2013-01-01

We explore how and to what extent prescription drug insurance expansions affects incentives for pharmaceutical advertising. When insurance expansions make markets more profitable, firms respond by boosting advertising. Theory suggests this effect will be magnified in the least competitive drug classes, where firms internalize a larger share of the benefits from advertising. Empirically, we find that the implementation of Part D coincides with a 14% to 19% increase in total advertising expenditures. This effect is indeed concentrated in the least competitive drug classes. The additional advertising raised utilization among non-elderly patients outside the Part D program by about 3.6%. This is roughly half of the direct utilization effect of Part D on elderly beneficiaries. The results suggest the presence of considerable spillover effects from publicly subsidized prescription drug insurance on the utilization and welfare of consumers outside the program. PMID:24308884

Coalescent-based genome analyses resolve the early branches of the euarchontoglires.

Directory of Open Access Journals (Sweden)

Vikas Kumar

Full Text Available Despite numerous large-scale phylogenomic studies, certain parts of the mammalian tree are extraordinarily difficult to resolve. We used the coding regions from 19 completely sequenced genomes to study the relationships within the super-clade Euarchontoglires (Primates, Rodentia, Lagomorpha, Dermoptera and Scandentia because the placement of Scandentia within this clade is controversial. The difficulty in resolving this issue is due to the short time spans between the early divergences of Euarchontoglires, which may cause incongruent gene trees. The conflict in the data can be depicted by network analyses and the contentious relationships are best reconstructed by coalescent-based analyses. This method is expected to be superior to analyses of concatenated data in reconstructing a species tree from numerous gene trees. The total concatenated dataset used to study the relationships in this group comprises 5,875 protein-coding genes (9,799,170 nucleotides from all orders except Dermoptera (flying lemurs. Reconstruction of the species tree from 1,006 gene trees using coalescent models placed Scandentia as sister group to the primates, which is in agreement with maximum likelihood analyses of concatenated nucleotide sequence data. Additionally, both analytical approaches favoured the Tarsier to be sister taxon to Anthropoidea, thus belonging to the Haplorrhine clade. When divergence times are short such as in radiations over periods of a few million years, even genome scale analyses struggle to resolve phylogenetic relationships. On these short branches processes such as incomplete lineage sorting and possibly hybridization occur and make it preferable to base phylogenomic analyses on coalescent methods.

[Noonan syndrome can be diagnosed clinically and through molecular genetic analyses].

Science.gov (United States)

Henningsen, Marie Krab; Jelsig, Anne Marie; Andersen, Helle; Brusgaard, Klaus; Ousager, Lilian Bomme; Hertz, Jens Michael

2015-08-03

Noonan syndrome is part of the group of RASopathies caused by germ line mutations in genes involved in the RAS/MAPK pathway. There is substantial phenotypic overlap among the RASopathies. Diagnosis of Noonan syndrome is often based on clinical features including dysmorphic facial features, short stature and congenital heart disease. Rapid advances in sequencing technology have made molecular genetic analyses a helpful tool in diagnosing and distinguishing Noonan syndrome from other RASopathies.

Analysing patient queue system in an imaging department: a step toward total quality management

International Nuclear Information System (INIS)

Kumar, Pratik; Pandey, A.K.

2008-01-01

Medical imaging has become an inevitable part of any diagnosis and/or management of the disease. This has put tremendous work-load on the medical imaging machines. The crowd of waiting patients at any busy imaging centre or rooms has become a common scene. This is especially true for any Government hospital or medical college in India since they cater to bulk of patients. As a part of total quality management we attempted to record, investigate, analyse and suggest on the state of patients' queue system at radiological imaging rooms

Hypothesis driven drug design: improving quality and effectiveness of the design-make-test-analyse cycle.

Science.gov (United States)

Plowright, Alleyn T; Johnstone, Craig; Kihlberg, Jan; Pettersson, Jonas; Robb, Graeme; Thompson, Richard A

2012-01-01

In drug discovery, the central process of constructing and testing hypotheses, carefully conducting experiments and analysing the associated data for new findings and information is known as the design-make-test-analyse cycle. Each step relies heavily on the inputs and outputs of the other three components. In this article we report our efforts to improve and integrate all parts to enable smooth and rapid flow of high quality ideas. Key improvements include enhancing multi-disciplinary input into 'Design', increasing the use of knowledge and reducing cycle times in 'Make', providing parallel sets of relevant data within ten working days in 'Test' and maximising the learning in 'Analyse'. Copyright © 2011 Elsevier Ltd. All rights reserved.

Auto-ignition generated combustion. Pt. 2. Thermodynamic fundamentals; Verbrennungssteuerung durch Selbstzuendung. T. 2. Experimentelle Analyse

Energy Technology Data Exchange (ETDEWEB)

Guibert, P. [Paris-6 Univ. (France). Lab. de Mecanique Physique; Morin, C. [Paris-6 Univ. (France); Mokhtari, S.

2004-02-01

The combustion initiation by auto-ignition demonstrates benefits in NO{sub x} reduction and in process stability for both spark-ignited and compression ignited engines. Based on the better thermodynamic particularities of the auto-ignition, which have been presented in the first part, the characteristics of this process are demonstrated in the second part by experimental analysis. For comparison with similar studies, the analyses have been carried out in base of a two stroke loop scavenged spark-ignition single cylinder engine. (orig.) [German] Die Steuerung der Verbrennung durch Selbstzuendung zeigt Vorteile bezueglich Senkung der NO{sub x}-Emission und Prozessstabilitaet, sowohl bei Otto- als auch bei Dieselmotoren. Auf Grundlage der thermodynamischen Besonderheiten der Selbstzuendvorgaenge, die im ersten Teil praesentiert wurden, erfolgt im zweiten Teil eine experimentelle Betrachtung der Prozesscharakteristika. Zur Vergleichbarkeit mit aehnlichen Untersuchungen wird die experimentelle Analyse auf Basis eines Zweitakt-Einzylinder-Ottomotors mit Umkehrspuelung durchgefuehrt. (orig.)

Electron-beam direct drive for rf accelerator cavities

International Nuclear Information System (INIS)

Nahemow, M.D.; Humphries, S. Jr.

1987-01-01

This paper describes a Program to Demonstrate Electron-Beam Direct Drive for Radio Frequency (RF) Linear Accelerators at the Westinghouse R and D Center. The experimental program was undertaken using an existing electron beam facility at the Westinghouse R and C Center to demonstrate the potential of the Direct Drive RF Cavities for High Power Beams concept discussed as part of a program to develop a viable alternate concept for driving RF linear accelerators

Sintering of Multilayered Porous Structures: Part I-Constitutive Models

DEFF Research Database (Denmark)

Olevsky, Eugene; Tadesse Molla, Tesfaye; Frandsen, Henrik Lund

2013-01-01

Theoretical analyses of shrinkage and distortion kinetics during sintering of bilayered porous structures are carried out. The developed modeling framework is based on the continuum theory of sintering; it enables the direct assessment of the cofiring process outcomes and of the impact of process...

Direct and indirect effects of organizational justice on work ability.

Science.gov (United States)

Spanier, K; Radoschewski, F M; Gutenbrunner, C; Bethge, M

2014-12-01

Organizational justice (OJ), involving transparent workplace procedures and treating staff members with respect, has been of growing concern in recent epidemiological research as a determinant of health-related outcomes. To examine the factorial validity of the German version of Moorman's Organizational Justice Questionnaire (OJQ), to investigate the direct cross-sectional effect of OJ on self-rated work ability and to analyse if there is an additional indirect effect of OJ on work ability mediated by effort-reward imbalance. An analysis of cross-sectional data from the Second German Sociomedical Panel of Employees, involving white-collar workers employed at least half time. We performed confirmatory factor analyses to test the factorial validity of the OJQ and analysed the direct and indirect associations of OJ and self-rated work ability by path model analysis. Of the 1217 participants (47% female; mean age: 51) 36% had poor work ability. Factor analyses confirmed the two-factor structure of the German OJQ. Work ability was explained directly by OJ (β = 0.30) and effort-reward imbalance (β = -0.27). Additionally, we identified an indirect effect of OJ that was mediated by effort-reward imbalance (β = 0.14). The total effect of OJ on work ability was remarkably strong (β = 0.44). Associations remained unchanged after adjustment for socio-demographic parameters. This study showed the importance of considering additional indirect pathways when examining the impact of OJ on the work ability of employees. © The Author 2014. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

78 FR 56622 - Airworthiness Directives; Continental Motors, Inc. Reciprocating Engines With Superior Air Parts...

Science.gov (United States)

2013-09-13

... AD currently requires initial and repetitive inspections and compression tests to detect cracks in.... That AD requires initial and repetitive inspections and compression tests to detect cracks in those... substantial direct effect on the States, on the relationship between the national Government and the States...

ECONOMIC CRISIS AND FOREIGN DIRECT INVESTMENTS IN ROMANIA

Directory of Open Access Journals (Sweden)

E. Bako

2015-10-01

Full Text Available Foreign direct investments represent an essential factor of economic development and growth at all levels: national, regional and local (county. The authors analyse the evolution of foreign direct investments in Romania over the last decade, taking into consideration the influence of the economic and financial crisis, different territorial levels, types of foreign investments, the economic activities and also the main countries of origin. The aim of the paper is to explain some of the reasons for the illustrated evolution of FDI and to reveal some policy implications for the future period.

Geodetic analysis of disputed accurate qibla direction

Science.gov (United States)

Saksono, Tono; Fulazzaky, Mohamad Ali; Sari, Zamah

2018-04-01

Muslims perform the prayers facing towards the correct qibla direction would be the only one of the practical issues in linking theoretical studies with practice. The concept of facing towards the Kaaba in Mecca during the prayers has long been the source of controversy among the muslim communities to not only in poor and developing countries but also in developed countries. The aims of this study were to analyse the geodetic azimuths of qibla calculated using three different models of the Earth. The use of ellipsoidal model of the Earth could be the best method for determining the accurate direction of Kaaba from anywhere on the Earth's surface. A muslim cannot direct himself towards the qibla correctly if he cannot see the Kaaba due to setting out process and certain motions during the prayer this can significantly shift the qibla direction from the actual position of the Kaaba. The requirement of muslim prayed facing towards the Kaaba is more as spiritual prerequisite rather than physical evidence.

Direct health care costs associated with obesity in Chinese population in 2011.

Science.gov (United States)

Shi, Jingcheng; Wang, Yao; Cheng, Wenwei; Shao, Hui; Shi, Lizheng

2017-03-01

Overweight and obesity are established major risk factors for type 2 diabetes, and major public health concerns in China. This study aims to assess the economic burden associated with overweight and obesity in the Chinese population ages 45 and older. The Chinese Health and Retirement Longitudinal Study (CHARLS) in 2011 included 13,323 respondents of ages 45 and older living in 450 rural and urban communities across China. Demographic information, height, weight, direct health care costs for outpatient visits, hospitalization, and medications for self-care were extracted from the CHARLS database. Health Care costs were calculated in 2011 Chinese currency. The body mass index (BMI) was used to categorize underweight, normal weight, overweight, and obese populations. Descriptive analyses and a two-part regression model were performed to investigate the association of BMI with health care costs. To account for non-normality of the cost data, we applied a non-parametric bootstrap approach using the percentile method to estimate the 95% confidence intervals (95% CIs). Overweight and obese groups had significantly higher total direct health care costs (RMB 2246.4, RMB 2050.7, respectively) as compared with the normal-weight group (RMB 1886.0). When controlling for demographic characteristics, overweight and obese adults were 15.0% and 35.9% more likely to incur total health care costs, and obese individuals had 14.2% higher total health care costs compared with the normal-weight group. Compared with the normal-weight counterparts, the annual total direct health care costs were significantly higher among obese adults in China. Copyright © 2016 Elsevier Inc. All rights reserved.

Method of Poisson's ratio imaging within a material part

Science.gov (United States)

Roth, Don J. (Inventor)

1996-01-01

The present invention is directed to a method of displaying the Poisson's ratio image of a material part. In the present invention longitudinal data is produced using a longitudinal wave transducer and shear wave data is produced using a shear wave transducer. The respective data is then used to calculate the Poisson's ratio for the entire material part. The Poisson's ratio approximations are then used to displayed the image.

Stochastic resonance in a gain-noise model of a single-mode laser driven by pump noise and quantum noise with cross-correlation between real and imaginary parts under direct signal modulation

Institute of Scientific and Technical Information of China (English)

Chen Li-Mei; Cao Li; Wu Da-Jin

2007-01-01

Stochastic resonance (SR) is studied in a gain-noise model of a single-mode laser driven by a coloured pump noise and a quantum noise with cross-correlation between real and imaginary parts under a direct signal modulation. By using a linear approximation method, we find that the SR appears during the variation of signal-to-noise ratio (SNR)separately with the pump noise self-correlation time τ, the noise correlation coefficient between the real part and the imaginary part of the quantum noise λq, the attenuation coefficient γ and the deterministic steady-state intensity I0.In addition, it is found that the SR can be characterized not only by the dependence of SNR on the noise variables of τand λq, but also by the dependence of SNR on the laser system variables of γ and I0. Thus our investigation extends the characteristic quantity of SR proposed before.

Accelerator mass spectrometry analyses of environmental radionuclides: sensitivity, precision and standardisation

Science.gov (United States)

Hotchkis; Fink; Tuniz; Vogt

2000-07-01

Accelerator Mass Spectrometry (AMS) is the analytical technique of choice for the detection of long-lived radionuclides which cannot be practically analysed with decay counting or conventional mass spectrometry. AMS allows an isotopic sensitivity as low as one part in 10(15) for 14C (5.73 ka), 10Be (1.6 Ma), 26Al (720 ka), 36Cl (301 ka), 41Ca (104 ka), 129I (16 Ma) and other long-lived radionuclides occurring in nature at ultra-trace levels. These radionuclides can be used as tracers and chronometers in many disciplines: geology, archaeology, astrophysics, biomedicine and materials science. Low-level decay counting techniques have been developed in the last 40-50 years to detect the concentration of cosmogenic, radiogenic and anthropogenic radionuclides in a variety of specimens. Radioactivity measurements for long-lived radionuclides are made difficult by low counting rates and in some cases the need for complicated radiochemistry procedures and efficient detectors of soft beta-particles and low energy x-rays. The sensitivity of AMS is unaffected by the half-life of the isotope being measured, since the atoms not the radiations that result from their decay, are counted directly. Hence, the efficiency of AMS in the detection of long-lived radionuclides is 10(6)-10(9) times higher than decay counting and the size of the sample required for analysis is reduced accordingly. For example, 14C is being analysed in samples containing as little as 20 microg carbon. There is also a world-wide effort to use AMS for the analysis of rare nuclides of heavy mass, such as actinides, with important applications in safeguards and nuclear waste disposal. Finally, AMS microprobes are being developed for the in-situ analysis of stable isotopes in geological samples, semiconductors and other materials. Unfortunately, the use of AMS is limited by the expensive accelerator technology required, but there are several attempts to develop compact AMS spectrometers at low (advances in AMS

Analyse du vent sur l'aérodrome de Brasov-Ghimbav (Roumanie

Directory of Open Access Journals (Sweden)

Marian Ilie Briceag

2011-01-01

Full Text Available Cette analyse du vent est destinée à préciser les conditions météorologiques locales qui conditionnent le fonctionnement de l'aérodrome de Brasov-Ghimbav. En aviation, la direction et l'intensité du vent sont très importantes pour le décollage et plus encore pour l'atterrissage des aéronefs. L'étude de cet élément météorologique est réalisée à partir d'une analyse climatologique portant sur 39 années, de 1971 à 2009, et d'une analyse aérologique sur 10 années, de 2000 à 2009 (les observations météorologiques ont été fournies par l'Administration Nationale de la Météorologie. Les résultats obtenus montrent la distribution prédominante du vent selon certaines directions, les directions nord-ouest et sud-ouest, pour les observations visuelles anciennes, et les directions ouest-nord-ouest et sud-sud-ouest, pour les observations automatiques au cours des six dernières années. Quelle que soit la méthode d'observation, c'est le vent de travers (directions ouest qui atteint les vitesses les plus élevées sur la piste principale de l'aérodrome de Brasov-Ghimbav, comme du reste sur la piste projetée pour le futur aéroport international de Brasov. Cela constitue un problème pour les aéronefs les plus légers, dont les valeurs limites pour le vent de travers sont faibles. Dans ce contexte, la prévision des vents violents est très importante. La distribution horaire des vents sur la période 2000­2009, montre notamment qu'au printemps et en été, les vents de nord-ouest sont largement dominants durant le jour, en particulier pour les vitesses [10-15 m/s, avec une fréquence maximale entre 10 et 15 heures. L'analyse aérologique des situations météorologiques apporte des éléments d'explication à certaines observations. Ainsi les vitesses du vent ≥ 20 m/s ont été enregistrées majoritairement en présence du cyclone Islandais, lors du passage du front atmosphérique froid, le contraste barrique étant �

Exchange Rate Movement and Foreign Direct Investment in Asean Economies

OpenAIRE

Lily, Jaratin; Kogid, Mori; Mulok, Dullah; Thien Sang, Lim; Asid, Rozilee

2014-01-01

The inflows of foreign direct investment (FDI) are important for a country's economic development, but the world market for FDI has become more competitive. This paper empirically analyses the exchange rate movements and foreign direct investment (FDI) relationship using annual data on ASEAN economies, that is, Malaysia, the Philippines, Thailand, and Singapore. By employing ARDL bounds test approach, the empirical results show the existence of significant long-run cointegration between excha...

Direct neutrino mass measurements

Energy Technology Data Exchange (ETDEWEB)

Weinheimer, Christian, E-mail: weinheimer@uni-muenster.de [Westfaelische Wilhelms-Universitaet, Institut fuer Kernphysik (Germany)

2013-03-15

Direct neutrino mass experiments are complementary to searches for neutrinoless double {beta}-decay and to analyses of cosmological data. The previous tritium beta decay experiments at Mainz and at Troitsk have achieved upper limits on the neutrino mass of about 2 eV/c{sup 2} . The KATRIN experiment under construction will improve the neutrino mass sensitivity down to 200 meV/c{sup 2} by increasing strongly the statistics and-at the same time-reducing the systematic uncertainties. Huge improvements have been made to operate the system extremely stably and at very low background rate. The latter comprises new methods to reject secondary electrons from the walls as well as to avoid and to eject electrons stored in traps. As an alternative to tritium {beta}-decay experiments cryo-bolometers investigating the endpoint region of {sup 187}Re {beta}-decay or the electron capture of {sup 163}Ho are being developed. This article briefly reviews the current status of the direct neutrino mass measurements.

The EU Nickel Directive revisited--future steps towards better protection against nickel allergy

DEFF Research Database (Denmark)

Thyssen, Jacob P; Uter, Wolfgang; McFadden, John

2011-01-01

In July 2001, the EU Nickel Directive came into full force to protect European citizens against nickel allergy and dermatitis. Prior to this intervention, Northern European governments had already begun to regulate consumer nickel exposure. According to part 2 of the EU Nickel Directive and the D......In July 2001, the EU Nickel Directive came into full force to protect European citizens against nickel allergy and dermatitis. Prior to this intervention, Northern European governments had already begun to regulate consumer nickel exposure. According to part 2 of the EU Nickel Directive...... and the Danish nickel regulation, consumer items intended to be in direct and prolonged contact with the skin were not allowed to release more than 0.5 µg nickel/cm2/week. It was considered unlikely that nickel allergy would disappear altogether as a proportion of individuals reacted below the level defined...

The EU Nickel Directive revisited--future steps towards better protection against nickel allergy

DEFF Research Database (Denmark)

Thyssen, Jacob P; Uter, Wolfgang; McFadden, John

2011-01-01

In July 2001, the EU Nickel Directive came into full force to protect European citizens against nickel allergy and dermatitis. Prior to this intervention, Northern European governments had already begun to regulate consumer nickel exposure. According to part 2 of the EU Nickel Directive...... by the EU Nickel Directive. Despite this, the EU Nickel Directive part 2 was expected to work as an operational limit that would sufficiently protect European consumers against nickel allergy and dermatitis. This review presents the accumulation of epidemiological studies that evaluated the possible effect...... and the Danish nickel regulation, consumer items intended to be in direct and prolonged contact with the skin were not allowed to release more than 0.5 µg nickel/cm2/week. It was considered unlikely that nickel allergy would disappear altogether as a proportion of individuals reacted below the level defined...

Cost-of-illness studies and cost-effectiveness analyses in anxiety disorders: a systematic review.

Science.gov (United States)

Konnopka, Alexander; Leichsenring, Falk; Leibing, Eric; König, Hans-Helmut

2009-04-01

To review cost-of-illness studies (COI) and cost-effectiveness analyses (CEA) conducted for anxiety disorders. Based on a database search in Pubmed, PsychINFO and NHS EED, studies were classified according to various criteria. Cost data were inflated and converted to 2005 US-$ purchasing power parities (PPP). We finally identified 20 COI and 11 CEA of which most concentrated on panic disorder (PD) and generalized anxiety disorder (GAD). Differing inclusion of cost categories limited comparability of COI. PD and GAD tended to show higher direct costs per case, but lower direct cost per inhabitant than social and specific phobias. Different measures of effectiveness severely limited comparability of CEA. Overall CEA analysed 26 therapeutic or interventional strategies mostly compared to standard treatment, 8 of them resulting in lower better effectiveness and costs than the comparator. Anxiety disorders cause considerable costs. More research on phobias, more standardised inclusion of cost categories in COI and a wider use of comparable effectiveness measures (like QALYs) in CEA is needed.

William D. Ford Federal Direct Loan Program. Final Regulations. Federal Register, Department of Education, 34 CFR Part 685

Science.gov (United States)

National Archives and Records Administration, 2014

2014-01-01

The purpose of this regulatory action is to amend the regulations governing the William D. Ford Federal Direct Loan (Direct Loan) Program (§ 685.200 of title 34 of the Code of Federal Regulations (CFR)). These regulations strengthen and improve administration of the Federal Direct PLUS Loan Program authorized under title IV of the Higher Education…

Analyses on the formation of atmospheric particles and stabilized sulphuric acid clusters

Energy Technology Data Exchange (ETDEWEB)

Paasonen, P.

2012-11-01

Aerosol particles have various effects on our life. They affect the visibility and have diverse health effects, but are also applied in various applications, from drug inhalators to pesticides. Additionally, aerosol particles have manifold effects on the Earths' radiation budget and thus on the climate. The strength of the aerosol climate effect is one of the factors causing major uncertainties in the global climate models predicting the future climate change. Aerosol particles are emitted to atmosphere from various anthropogenic and biogenic sources, but they are also formed from precursor vapours in many parts of the world in a process called atmospheric new particle formation (NPF). The uncertainties in aerosol climate effect are partly due to the current lack of knowledge of the mechanisms governing the atmospheric NPF. It is known that gas phase sulphuric acid most certainly plays an important role in atmospheric NPF. However, also other vapours are needed in NPF, but the exact roles or even identities of these vapours are currently not exactly known. In this thesis I present some of the recent advancements in understanding of the atmospheric NPF in terms of the roles of the participating vapours and the meteorological conditions. Since direct measurements of new particle formation rate in the initial size scale of the formed particles (below 2 nm) are so far infrequent in both spatial and temporal scales, indirect methods are needed. The work presented on the following pages approaches the NPF from two directions: by analysing the observed formation rates of particles after they have grown to sizes measurable with widely applied instruments (2 nm or larger), and by measuring and modelling the initial sulphuric acid cluster formation. The obtained results can be summarized as follows. (1) The observed atmospheric new particle formation rates are typically connected with sulphuric acid concentration to the power close to two. (2) Also other compounds, most

77 FR 17327 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2012-03-26

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2011-1087; Directorate Identifier 2011-NM-032-AD; Amendment 39-16967; AD 2012-04-11] RIN 2120-AA64 Airworthiness Directives; Airbus Airplanes Correction In rule document 2012-5859 appearing on pages 14679-14681...

Synthetic biology analysed tools for discussion and evaluation

CERN Document Server

2016-01-01

Synthetic biology is a dynamic, young, ambitious, attractive, and heterogeneous scientific discipline. It is constantly developing and changing, which makes societal evaluation of this emerging new science a challenging task, prone to misunderstandings. Synthetic biology is difficult to capture, and confusion arises not only regarding which part of synthetic biology the discussion is about, but also with respect to the underlying concepts in use. This book offers a useful toolbox to approach this complex and fragmented field. It provides a biological access to the discussion using a 'layer' model that describes the connectivity of synthetic or semisynthetic organisms and cells to the realm of natural organisms derived by evolution. Instead of directly reviewing the field as a whole, firstly our book addresses the characteristic features of synthetic biology that are relevant to the societal discussion. Some of these features apply only to parts of synthetic biology, whereas others are relevant to synthetic bi...

Local Fitness Landscapes Predict Yeast Evolutionary Dynamics in Directionally Changing Environments.

Science.gov (United States)

Gorter, Florien A; Aarts, Mark G M; Zwaan, Bas J; de Visser, J Arjan G M

2018-01-01

The fitness landscape is a concept that is widely used for understanding and predicting evolutionary adaptation. The topography of the fitness landscape depends critically on the environment, with potentially far-reaching consequences for evolution under changing conditions. However, few studies have assessed directly how empirical fitness landscapes change across conditions, or validated the predicted consequences of such change. We previously evolved replicate yeast populations in the presence of either gradually increasing, or constant high, concentrations of the heavy metals cadmium (Cd), nickel (Ni), and zinc (Zn), and analyzed their phenotypic and genomic changes. Here, we reconstructed the local fitness landscapes underlying adaptation to each metal by deleting all repeatedly mutated genes both by themselves and in combination. Fitness assays revealed that the height, and/or shape, of each local fitness landscape changed considerably across metal concentrations, with distinct qualitative differences between unconditionally (Cd) and conditionally toxic metals (Ni and Zn). This change in topography had particularly crucial consequences in the case of Ni, where a substantial part of the individual mutational fitness effects changed in sign across concentrations. Based on the Ni landscape analyses, we made several predictions about which mutations had been selected when during the evolution experiment. Deep sequencing of population samples from different time points generally confirmed these predictions, demonstrating the power of landscape reconstruction analyses for understanding and ultimately predicting evolutionary dynamics, even under complex scenarios of environmental change. Copyright © 2018 by the Genetics Society of America.

Is part-time work a good or bad opportunity for people with disabilities? A European analysis.

Science.gov (United States)

Pagán, Ricardo

2007-12-30

The purpose of this article is to analyse the incidence of part-time employment among people with disabilities within a European context. Particular attention is paid to the type of part-time employment (voluntary vs. involuntary) and the levels of job satisfaction that people with disabilities report. Using data from the European Community Household Panel for the period 1995-2001, we estimate part-time rates, preferences and levels of job satisfaction for people with and without disabilities for 13 European countries. The results show that a higher number of people with disabilities work part-time, compared to non-disabled workers. This is mainly due to disabled part-time workers having a much higher preference for part-time working than people without disability. This finding is corroborated when we analyse the levels of job satisfaction for disabled part-time workers. Part-time employment becomes a relevant instrument for policy makers and employers to improve the social inclusion, income and labour conditions of the people with disabilities because it allows these people to achieve a much better balance between their personal and health needs and working life.

Garrison's model of self-directed learning: preliminary validation and relationship to academic achievement.

Science.gov (United States)

Abd-El-Fattah, Sabry M

2010-11-01

In this project, 119 undergraduates responded to a questionnaire tapping three psychological constructs implicated in Garrison's model of self-directed learning: self-management, self-monitoring, and motivation. Mediation analyses showed that these psychological constructs are interrelated and that motivation mediates the relationship between self-management and self-monitoring. Path modeling analyses revealed that self-management and self-monitoring significantly predicted academic achievement over two semesters with self-management being the strongest predictor. Motivation significantly predicted academic achievement over the second semester only. Implications of these findings for self-directed learning and academic achievement in a traditional classroom setting are discussed.

SCALE: A modular code system for performing standardized computer analyses for licensing evaluation. Functional modules F9--F16 -- Volume 2, Part 2, Revision 4

Energy Technology Data Exchange (ETDEWEB)

West, J.T.; Hoffman, T.J.; Emmett, M.B.; Childs, K.W.; Petrie, L.M.; Landers, N.F.; Bryan, C.B.; Giles, G.E. [Oak Ridge National Lab., TN (United States)

1995-04-01

SCALE--a modular code system for Standardized Computer Analyses Licensing Evaluation--has been developed by Oak Ridge National Laboratory at the request of the US Nuclear Regulatory Commission. The SCALE system utilizes well-established computer codes and methods within standard analysis sequences that (1) allow an input format designed for the occasional user and/or novice, (2) automate the data processing and coupling between modules, and (3) provide accurate and reliable results. System development has been directed at problem-dependent cross-section processing and analysis of criticality safety, shielding, heat transfer, and depletion/decay problems. Since the initial release of SCALE in 1980, the code system has been heavily used for evaluation of nuclear fuel facility and package designs. This revision documents Version 4.2 of the system. The manual is divided into three volumes: Volume 1--for the control module documentation, Volume 2--for functional module documentation; and Volume 3--for documentation of the data libraries and subroutine libraries. This volume discusses the following functional modules: MORSE-SGC; HEATING 7.2; KENO V.a; JUNEBUG-II; HEATPLOT-S; REGPLOT 6; PLORIGEN; and OCULAR.

SCALE: A modular code system for performing standardized computer analyses for licensing evaluation. Functional modules F9--F16 -- Volume 2, Part 2, Revision 4

International Nuclear Information System (INIS)

West, J.T.; Hoffman, T.J.; Emmett, M.B.; Childs, K.W.; Petrie, L.M.; Landers, N.F.; Bryan, C.B.; Giles, G.E.

1995-04-01

SCALE--a modular code system for Standardized Computer Analyses Licensing Evaluation--has been developed by Oak Ridge National Laboratory at the request of the US Nuclear Regulatory Commission. The SCALE system utilizes well-established computer codes and methods within standard analysis sequences that (1) allow an input format designed for the occasional user and/or novice, (2) automate the data processing and coupling between modules, and (3) provide accurate and reliable results. System development has been directed at problem-dependent cross-section processing and analysis of criticality safety, shielding, heat transfer, and depletion/decay problems. Since the initial release of SCALE in 1980, the code system has been heavily used for evaluation of nuclear fuel facility and package designs. This revision documents Version 4.2 of the system. The manual is divided into three volumes: Volume 1--for the control module documentation, Volume 2--for functional module documentation; and Volume 3--for documentation of the data libraries and subroutine libraries. This volume discusses the following functional modules: MORSE-SGC; HEATING 7.2; KENO V.a; JUNEBUG-II; HEATPLOT-S; REGPLOT 6; PLORIGEN; and OCULAR

Seismic triggering of landslides, Part A: Field evidence from the Northern Tien Shan

Science.gov (United States)

Havenith, H.-B.; Strom, A.; Jongmans, D.; Abdrakhmatov, A.; Delvaux, D.; Tréfois, P.

Landslides triggered by strong earthquakes often caused most of the global damage and most of all casualties related to the events, such as shown by the M = 7.7 Peru earthquake in 1970, by the M = 7.6 El Salvador earthquake in 2001 or by the M = 7.4 Khait (Tajikistan) earthquake in 1949. The obvious impact of a landslide on the population is directly related to its movement. Yet, prediction of future failure potential and hence future risk to population is necessary in order to avoid further catastrophes and involves the analyses of the origin of seismic instability. The seismic landslide potential is mainly determined by the interaction between the regional seismic hazard and local geological conditions. At a local scale, seismic factors interfering with geological conditions can produce site-specific ground motions. The influence of such Site Effects on instability is the principal topic of this paper, which is divided into two parts, A and B. The present Part A is concerned with the correlation of field data with observed instability phenomena. Field data were obtained on mainly three landslide sites in the Northern Tien Shan Mountains in Kyrgyzstan, Central Asia. Geophysical prospecting, earthquake recordings, geological observation, trenching and geotechnical tests were the main investigation tools. The collected information gives an insight in the geological background of the slope failure and allows us to roughly infer failure mechanisms from field evidence. A detailed analysis of the susceptibility of a mechanism to specific geological conditions will be shown in Part B.

Seismic triggering of landslides, Part A: Field evidence from the Northern Tien Shan

Directory of Open Access Journals (Sweden)

H.-B. Havenith

2003-01-01

Full Text Available Landslides triggered by strong earthquakes often caused most of the global damage and most of all casualties related to the events, such as shown by the M = 7.7 Peru earthquake in 1970, by the M = 7.6 El Salvador earthquake in 2001 or by the M = 7.4 Khait (Tajikistan earthquake in 1949. The obvious impact of a landslide on the population is directly related to its movement. Yet, prediction of future failure potential and hence future risk to population is necessary in order to avoid further catastrophes and involves the analyses of the origin of seismic instability. The seismic landslide potential is mainly determined by the interaction between the regional seismic hazard and local geological conditions. At a local scale, seismic factors interfering with geological conditions can produce site-specific ground motions. The influence of such Site Effects on instability is the principal topic of this paper, which is divided into two parts, A and B. The present Part A is concerned with the correlation of field data with observed instability phenomena. Field data were obtained on mainly three landslide sites in the Northern Tien Shan Mountains in Kyrgyzstan, Central Asia. Geophysical prospecting, earthquake recordings, geological observation, trenching and geotechnical tests were the main investigation tools. The collected information gives an insight in the geological background of the slope failure and allows us to roughly infer failure mechanisms from field evidence. A detailed analysis of the susceptibility of a mechanism to specific geological conditions will be shown in Part B.

Spatial analyses of cost efficient measures to reduce N-leaching

DEFF Research Database (Denmark)

Jacobsen, Brian H.; Abildtrup, Jens; Ørum, Jens Erik

(WFD). The analysis shows that the geographical position of the measures are very important in order to achieve the expected nutrient reduction. The current income varies a lot in the River basin and this might influence the choice of cost effective measures to reduce nutrient load. Furthermore a close......The Nitrate Directive has only been implemented satisfactorily in a few EU countries. The Commission have accepted the Danish implementation of the directive based on the Plan for the Aquatic Environment II. The costs of this plan has been calculated to 70 million € or 2,0 € per kg N in reduced...... leaching. The farmers have paid 60% of the costs. The paper then describes an example of a regional analysis covering the River Basin of Ringkøbing Fjord in Denmark, which indicates the type of calculations needed to find the measures and costs in order to comply with parts of the Water Framework Directive...

78 FR 19983 - Airworthiness Directives; General Electric Company Turbofan Engines

Science.gov (United States)

2013-04-03

... Airworthiness Directives; General Electric Company Turbofan Engines AGENCY: Federal Aviation Administration (FAA... Electric Company (GE) CF34-8C and CF34-8E turbofan engines with certain part numbers (P/N) of operability...-8E6, and CF34-8E6A1 turbofan engines, with an operability bleed valve (OBV) part number (P/N...

Innovative three-dimensional neutronics analyses directly coupled with cad models of geometrically complex fusion systems

International Nuclear Information System (INIS)

Sawan, M.; Wilson, P.; El-Guebaly, L.; Henderson, D.; Sviatoslavsky, G.; Bohm, T.; Kiedrowski, B.; Ibrahim, A.; Smith, B.; Slaybaugh, R.; Tautges, T.

2007-01-01

Fusion systems are, in general, geometrically complex requiring detailed three-dimensional (3-D) nuclear analysis. This analysis is required to address tritium self-sufficiency, nuclear heating, radiation damage, shielding, and radiation streaming issues. To facilitate such calculations, we developed an innovative computational tool that is based on the continuous energy Monte Carlo code MCNP and permits the direct use of CAD-based solid models in the ray-tracing. This allows performing the neutronics calculations in a model that preserves the geometrical details without any simplification, eliminates possible human error in modeling the geometry for MCNP, and allows faster design iterations. In addition to improving the work flow for simulating complex 3- D geometries, it allows a richer representation of the geometry compared to the standard 2nd order polynomial representation. This newly developed tool has been successfully tested for a detailed 40 degree sector benchmark of the International Thermonuclear Experimental Reactor (ITER). The calculations included determining the poloidal variation of the neutron wall loading, flux and nuclear heating in the divertor components, nuclear heating in toroidal field coils, and radiation streaming in the mid-plane port. The tool has been applied to perform 3-D nuclear analysis for several fusion designs including the ARIES Compact Stellarator (ARIES-CS), the High Average Power Laser (HAPL) inertial fusion power plant, and ITER first wall/shield (FWS) modules. The ARIES-CS stellarator has a first wall shape and a plasma profile that varies toroidally within each field period compared to the uniform toroidal shape in tokamaks. Such variation cannot be modeled analytically in the standard MCNP code. The impact of the complex helical geometry and the non-uniform blanket and divertor on the overall tritium breeding ratio and total nuclear heating was determined. In addition, we calculated the neutron wall loading variation in

Mean-field level analysis of epidemics in directed networks

Energy Technology Data Exchange (ETDEWEB)

Wang, Jiazeng [School of Mathematical Sciences, Peking University, Beijing 100871 (China); Liu, Zengrong [Mathematics Department, Shanghai University, Shanghai 200444 (China)], E-mail: wangjiazen@yahoo.com.cn, E-mail: zrongliu@online.sh.cn

2009-09-04

The susceptible-infected-removed spreading model in a directed graph is studied. The mean-field level rate equations are built with the degree-degree connectivity correlation element and the (in, out)-degree distribution. And the outbreak threshold is obtained analytically-it is determined by the combination of connectivity probability and the degree distribution. Furthermore, the methods of calculating the degree-degree correlations in directed networks are presented. The numerical results of the discrete epidemic processes in networks verify our analyses.

Mean-field level analysis of epidemics in directed networks

International Nuclear Information System (INIS)

Wang, Jiazeng; Liu, Zengrong

2009-01-01

The susceptible-infected-removed spreading model in a directed graph is studied. The mean-field level rate equations are built with the degree-degree connectivity correlation element and the (in, out)-degree distribution. And the outbreak threshold is obtained analytically-it is determined by the combination of connectivity probability and the degree distribution. Furthermore, the methods of calculating the degree-degree correlations in directed networks are presented. The numerical results of the discrete epidemic processes in networks verify our analyses.

Performance Assessment Modeling and Sensitivity Analyses of Generic Disposal System Concepts.

Energy Technology Data Exchange (ETDEWEB)

Sevougian, S. David; Freeze, Geoffrey A.; Gardner, William Payton; Hammond, Glenn Edward; Mariner, Paul

2014-09-01

directly, rather than through simplified abstractions. It also a llows for complex representations of the source term, e.g., the explicit representation of many individual waste packages (i.e., meter - scale detail of an entire waste emplacement drift). This report fulfills the Generic Disposal System Analysis Work Packa ge Level 3 Milestone - Performance Assessment Modeling and Sensitivity Analyses of Generic Disposal System Concepts (M 3 FT - 1 4 SN08080 3 2 ).

Fundamental topics for thermo-elastic stress analyses

International Nuclear Information System (INIS)

Biermann, M.

1989-01-01

This paper delivers a consistent collection of theoretical fundamentals needed to perform rather sound experimental stress analyses on thermo-elastic materials. An exposition of important concepts of symmetry and so-called peer groups, yielding the very base for a rational description of materials, goes ahead and is followed by an introduction to the constitutive theory of simple materials. Neat distinction is made between stress contributions determined by deformational and thermal impressions, on the one part, and stress constraints not accessible to strain gauging, on the other part. The mathematical formalism required for establishing constitutive equations is coherently developed from scratch and aided, albeit not subrogated, by intuition. The main intention goes to turning some of the recent advances in the nonlinear field theories of thermomechanics to practical account. A full success therein, obviously, results under the restriction to thermo-elasticity. In adverting to more particular subjects, the elementary static effects of nonlinear isotropic elasticity are pointed out. Due allowance is made for thermal effects likely to occur in heat conducting materials also beyond the isothermal or isentropic limit cases. Linearization of the constitutive equations for anisotropic thermo-elastic materials is then shown to entail the formulas of the classical theory. (orig./MM) [de

Leader Cells Define Directionality of Trunk, but Not Cranial, Neural Crest Cell Migration

Directory of Open Access Journals (Sweden)

Jo Richardson

2016-05-01

Full Text Available Collective cell migration is fundamental for life and a hallmark of cancer. Neural crest (NC cells migrate collectively, but the mechanisms governing this process remain controversial. Previous analyses in Xenopus indicate that cranial NC (CNC cells are a homogeneous population relying on cell-cell interactions for directional migration, while chick embryo analyses suggest a heterogeneous population with leader cells instructing directionality. Our data in chick and zebrafish embryos show that CNC cells do not require leader cells for migration and all cells present similar migratory capacities. In contrast, laser ablation of trunk NC (TNC cells shows that leader cells direct movement and cell-cell contacts are required for migration. Moreover, leader and follower identities are acquired before the initiation of migration and remain fixed thereafter. Thus, two distinct mechanisms establish the directionality of CNC cells and TNC cells. This implies the existence of multiple molecular mechanisms for collective cell migration.

Pharmaceutical advertising and Medicare Part D.

Science.gov (United States)

Lakdawalla, Darius; Sood, Neeraj; Gu, Qian

2013-12-01

We explore how and to what extent prescription drug insurance expansions affect incentives for pharmaceutical advertising. When insurance expansions make markets more profitable, firms respond by boosting advertising. Theory suggests this effect will be magnified in the least competitive drug classes, where firms internalize a larger share of the benefits from advertising. Empirically, we find that the implementation of Part D coincides with a 14-19% increase in total advertising expenditures. This effect is indeed concentrated in the least competitive drug classes. The additional advertising raised utilization among non-elderly patients outside the Part D program by about 3.6%. This is roughly half of the direct utilization effect of Part D on elderly beneficiaries. The results suggest the presence of considerable spillover effects from publicly subsidized prescription drug insurance on the utilization and welfare of consumers outside the program. Copyright © 2013 Elsevier B.V. All rights reserved.

A Comparative Study on Energy and Exergy Analyses of a CI Engine Performed with Different Multiple Injection Strategies at Part Load: Effect of Injection Pressure

Directory of Open Access Journals (Sweden)

Muammer Özkan

2015-01-01

Full Text Available In this study, a four stroke four cylinder direct injection CI engine was run using three different injection pressures. In all measurements, the fuel quantity per cycle, the pre injection and main injection timing, the boost pressure and the engine speed were kept constant. The motor tests were performed under 130, 140 and 150 MPa rail pressure. During the theoretical part of the study, combustion, emission, energy and exergy analysis were made using the test results. An increase in the injection pressure increases combustion efficiency. The results show that combustion efficiency is not enough by itself, because the increase in the power need of the injection pump, decreases the thermal efficiency. The increase in the combustion temperature, increases the cooling loss and decreases the exergetic efficiency. In addition, the NOx emissions increased by 12% and soot emissions decreased 44% via increasing injection pressure by 17%. The thermal and exergetic efficiencies are found inversely proportional with injection pressure. Exergy destruction is found independent of the injection pressure and its value is obtained as ~6%.

A two-channel wave analyser for sounding rockets and satellites

International Nuclear Information System (INIS)

Brondz, E.

1989-04-01

Studies of low frequency electromagnetic waves, produced originally by lightning discharges penetrating the ionosphere, provide an important source of valuable information about the earth's surrounding plasma. Use of rockets and satellites supported by ground-based observations implies, unique opportunity for measuring in situ a number of parameters simultaneously in order to correlate data from various measurements. However, every rocket experiment has to be designed bearing in mind telemetry limitations and/or short flight duration. Typical flight duration for Norwegian rockets launched from Andoeya Rocket Range is 500 to 600 s. Therefore, the most desired way to use a rocket or satellite is to carry out data analyses on board in real time. Recent achievements in Digital Signal Processing (DSP) technology have made it possible to undertake very complex on board data manipulation. As a part of rocket instrumentation, a DSP based unit able to carry out on board analyses of low frequency electromagnetic waves in the ionosphere has been designed. The unit can be seen as a general purpose computer built on the basis of a fixed-point 16 bit signal processor. The unit is supplied with a program code in order to perform wave analyses on two independent channels simultaneously. The analyser is able to perform 256 point complex fast fourier transformations, and it produce a spectral power desity estimate on both channels every 85 ms. The design and construction of the DSP based unit is described and results from the tests are presented

78 FR 14647 - Airworthiness Directives; Airbus Airplanes

Science.gov (United States)

2013-03-07

... Airworthiness Directives; Airbus Airplanes AGENCY: Federal Aviation Administration (FAA), Department of... (AD) for certain Airbus Model A310-204, -222, -304, -322, and -324 airplanes. This AD was prompted by... the Airbus A310 Airworthiness Limitation Section (ALS) Part 1 and bolts must be replaced at or before...

Constraint solving for direct manipulation of features

NARCIS (Netherlands)

Lourenco, D.; Oliveira, P.; Noort, A.; Bidarra, R.

2006-01-01

In current commercial feature modeling systems, support for direct manipulation of features is not commonly available. This is partly due to the strong reliance of such systems on constraints, but also to the lack of speed of current constraint solvers. In this paper, an approach to the optimization

The Parametrical Design of the Parts from the Same Technological Family

Directory of Open Access Journals (Sweden)

Vasile Cojocaru

2008-01-01

Full Text Available The paper presents a methodology used for rapid design of part solidmodels for the same technological family. The parameterized models,which allow the rapid generation of a new part with other dimensions /shape, can be obtained by associating variable parameters to the dimensionsor to the shape of a part. The methodology was exemplifiedon a flange type part. The model was design using Autodesk Inventorsoftware and the introduction of the values for the parameters wasmade in two variants: directly from the Parameters dialog box of theCAD software and from MS Excel file.

The politeness prosody of the Javanese directive speech

Directory of Open Access Journals (Sweden)

F.X. Rahyono

2009-10-01

Full Text Available This experimental phonetic research deals with the prosodies of directive speech in Javanese. The research procedures were: (1 speech production, (2 acoustic analysis, and (3 perception test. The data investigated are three directive utterances, in the form of statements, commands, and questions. The data were obtained by recording dialogues that present polite as well as impolite speech. Three acoustic experiments were conducted for statements, commands, and questions in directive speech: (1 modifications of duration, (2 modifications of contour, and (3 modifications of fundamental frequency. The result of the subsequent perception tests to 90 stimuli with 24 subjects were analysed statistically with ANOVA (Analysis of Variant. Based on this statistic analysis, the prosodic characteristics of polite and impolite speech were identified.

Dimensional and material characteristics of direct deposited tool steel by CO II laser

Science.gov (United States)

Choi, J.

2006-01-01

Laser aided direct metalimaterial deposition (DMD) process builds metallic parts layer-by-layer directly from the CAD representation. In general, the process uses powdered metaUmaterials fed into a melt pool, creating fully dense parts. Success of this technology in the die and tool industry depends on the parts quality to be achieved. To obtain designed geometric dimensions and material properties, delicate control of the parameters such as laser power, spot diameter, traverse speed and powder mass flow rate is critical. In this paper, the dimensional and material characteristics of directed deposited H13 tool steel by CO II laser are investigated for the DMD process with a feedback height control system. The relationships between DMD process variables and the product characteristics are analyzed using statistical techniques. The performance of the DMD process is examined with the material characteristics of hardness, porosity, microstructure, and composition.

Nuclear reactor with scrammable part length rod

International Nuclear Information System (INIS)

Bevilacqua, F.

1979-01-01

A new part length rod is provided. It may be used to control xenon induced power oscillations but to contribute to shutdown reactivity when a rapid shutdown of the reactor is required. The part length rod consists of a control rod with three regions. The lower control region is a longer weaker active portion separated from an upper stronger shorter poison section by an intermediate section which is a relative non-absorber of neutrons. The combination of the longer weaker control section with the upper high worth poison section permits the part length rod of this to be scrammed into the core when a reactor shutdown is required but also permits the control rod to be used as a tool to control power distribution in both the axial and radial directions during normal operation

THE CONSEQUENCES OF THE NEW EU ACCOUNTING DIRECTIVE ON FINANCIAL REPORTING

Directory of Open Access Journals (Sweden)

MARIAN SOCOLIUC

2015-04-01

Full Text Available The objective of this paper is to analyse the EU accounting related legislation as a consequence of the introduction of the new European Directive, i.e. Directive 34 of the EC, changing the 4th and the 7th Directive of the EU. These accounting updates will mostly be of the technical and accounting type and will particularly be directed at the financial statements of different sized companies. Therefore, in light of these recent developments, we have herein focused on the current accounting system applied in the EU, which comprises the IAS/IFRS standards and the existing national regulations and is changed by the implementation of the EEC accounting directives.

The Emperor’s New Augmented Clothes. Digital Objects as Part of the Every Day

Directory of Open Access Journals (Sweden)

Nicola Liberati

2017-10-01

Full Text Available The main aim of this work is to solve a problem that Augmented Reality is facing by using phenomenological and phenomenological analyses and projectors. Augmented reality seeks to merge the digital and real world by producing a mixed reality where the digital objects are usually visualised thanks to the head mounted or mobile devices. However, this technology is facing problems because the objects generated by the digital devices are existing merely inside the small group of people while using specific devices. Therefore, these objects look fictitious for the other members of the society who are not using them. In order to analyse the elements which make these objects fictitious for the other member of the society, we will take into account the story of The Emperor’s new clothes because, even in this story, there are fictional entities not perceivable by other members of the community. Thanks to this story, it will be possible to highlight some elements which make the objects part of the everyday world. Moreover, it will show how the intersubjectivity of these objects is directly related to their way of being perceived by the subjects and, in the case of augmented reality, to the devices used to make them perceivable. For this reason, it is possible to solve the problem Augmented Reality is facing by changing the devices used to produce these digital objects. At the end of the work, we will propose a project which can solve the problem by following the elements previously highlighted. We will show how, thanks to wearable projectors, it is possible to produce digital clothes as part of the everyday world of every subject. Thanks to these digital clothes people will be able to wear the digital objects as if they were common, usual objects without being naked.

12 CFR 563b.25 - What definitions apply to this part?

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false What definitions apply to this part? 563b.25... FROM MUTUAL TO STOCK FORM § 563b.25 What definitions apply to this part? The following definitions... (including controlling, controlled by, and under common control with) means the direct or indirect power to...

Influence of peer review on the reporting of primary outcome(s) and statistical analyses of randomised trials.

Science.gov (United States)

Hopewell, Sally; Witt, Claudia M; Linde, Klaus; Icke, Katja; Adedire, Olubusola; Kirtley, Shona; Altman, Douglas G

2018-01-11

Selective reporting of outcomes in clinical trials is a serious problem. We aimed to investigate the influence of the peer review process within biomedical journals on reporting of primary outcome(s) and statistical analyses within reports of randomised trials. Each month, PubMed (May 2014 to April 2015) was searched to identify primary reports of randomised trials published in six high-impact general and 12 high-impact specialty journals. The corresponding author of each trial was invited to complete an online survey asking authors about changes made to their manuscript as part of the peer review process. Our main outcomes were to assess: (1) the nature and extent of changes as part of the peer review process, in relation to reporting of the primary outcome(s) and/or primary statistical analysis; (2) how often authors followed these requests; and (3) whether this was related to specific journal or trial characteristics. Of 893 corresponding authors who were invited to take part in the online survey 258 (29%) responded. The majority of trials were multicentre (n = 191; 74%); median sample size 325 (IQR 138 to 1010). The primary outcome was clearly defined in 92% (n = 238), of which the direction of treatment effect was statistically significant in 49%. The majority responded (1-10 Likert scale) they were satisfied with the overall handling (mean 8.6, SD 1.5) and quality of peer review (mean 8.5, SD 1.5) of their manuscript. Only 3% (n = 8) said that the editor or peer reviewers had asked them to change or clarify the trial's primary outcome. However, 27% (n = 69) reported they were asked to change or clarify the statistical analysis of the primary outcome; most had fulfilled the request, the main motivation being to improve the statistical methods (n = 38; 55%) or avoid rejection (n = 30; 44%). Overall, there was little association between authors being asked to make this change and the type of journal, intervention, significance of the

A directed network of Greek and Roman mythology

Science.gov (United States)

Choi, Yeon-Mu; Kim, Hyun-Joo

2007-08-01

We construct a directed network using a dictionary of Greek and Roman mythology in which the nodes represent the entries listed in the dictionary and we make directional links from an entry to other entries that appear in its explanatory part. We find that this network is clearly not a random network but a directed scale-free network in which the distributions of out-degree and in-degree follow a power-law with exponents γout≈3.0 and γin≈2.5, respectively. Also we measure several quantities which describe the topological properties of the network and compare it to that of other real networks.

Empirical Psycho-Aesthetics and Her Sisters: Substantive and Methodological Issues--Part II

Science.gov (United States)

Konecni, Vladimir J.

2013-01-01

Empirical psycho-aesthetics is approached in this two-part article from two directions. Part I, which appeared in the Winter 2012 issue of "JAE," addressed definitional and organizational issues, including the field's origins, its relation to "sister" disciplines (experimental philosophy, cognitive neuroscience of art, and neuroaesthetics), and…

Accident Analyses for Conversion of the University of Missouri Research Reactor (MURR) from Highly-Enriched to Low-Enriched Uranium

Energy Technology Data Exchange (ETDEWEB)

Stillman, J. A. [Argonne National Lab. (ANL), Argonne, IL (United States); Feldman, E. E. [Argonne National Lab. (ANL), Argonne, IL (United States); Jaluvka, D. [Argonne National Lab. (ANL), Argonne, IL (United States); Wilson, E. H. [Argonne National Lab. (ANL), Argonne, IL (United States); Foyto, L. P. [Univ. of Missouri, Columbia, MO (United States); Kutikkad, K. [Univ. of Missouri, Columbia, MO (United States); McKibben, J. C. [Univ. of Missouri, Columbia, MO (United States); Peters, N. J. [Univ. of Missouri, Columbia, MO (United States)

2017-02-01

This report contains the results of reactor accident analyses for the University of Missouri Research Reactor (MURR). The calculations were performed as part of the conversion from the use of highly-enriched uranium (HEU) fuel to the use of low-enriched uranium (LEU) fuel. The analyses were performed by staff members in the Research and Test Reactor Department at the Argonne National Laboratory (ANL) and the MURR Facility. MURR LEU conversion is part of an overall effort to develop and qualify high-density fuel within the U.S. High Performance Research Reactor Conversion (USHPRR) program conducted by the U.S. Department of Energy National Nuclear Security Administration’s Office of Material Management and Minimization (M³).

Radio-toxicological analysis of urine; Analyses radiotoxicologiques urinaires

Energy Technology Data Exchange (ETDEWEB)

Jeanmaire, L.; Jammet, H. [Commissariat a l' energie atomique et aux energies alternatives - CEA (France)

1959-07-01

The article is divided into two parts: general and technical. In the general part, a study of the behaviour of radioisotopes in the organism shows the hazards of internal contamination. In addition, the principle of the different methods for the estimation of this contamination is indicated. The second part, which is purely technical, describes some of the methods for urine analysis used in the S.H.A.R.P. radiotoxicology laboratory at the Saclay Nuclear Research Centre. The techniques relate to {sup 239}Pu, {sup 226}Ra, {sup 90}Sr, natural Th, natural U and {sup 233}U. Reprint of a paper published in Annales de Radiologie, Vol. 2, no. 9-10, p. 703-722, 1959 [French] L'article est divise en deux parties: generalites et techniques. Dans les generalites, l'etude du comportement des radioelements dans l'organisme met en evidence les dangers de la contamination interne. De plus le principe des differents moyens permettant d'apprecier cette contamination est indique. La seconde partie, purement technique, expose un certain nombre de methodes d'analyse urinaire utilisees au laboratoire de radiotoxicologie du S.H.A.R.P. au Centre d'Etudes nucleaires de Saclay. Les techniques concernent {sup 239}Pu, {sup 226}Ra, {sup 90}Sr, Th naturel, U naturel et {sup 233}U. Reproduction d'un article publie dans les Annales de Radiologie, Vol. 2, no. 9-10, p. 703-722, 1959.

About methods to reduce emissions of turbo charged engine gasoline direct injection

Science.gov (United States)

Neacsu, D.; Ivan, F.; Niculae, M.

2017-08-01

The paper aims to analyse and explain new methods applied on gasoline direct injection to reduce gas emissions and greenhouse effect. There are analysed the composition of emission inside the engine and which are the most harmful emission for the environment. Will be analysed the methods and systems which have a contribution to decrease emissions produced by the mixture of air and fuel. The paper contains details about after treatment systems which are designed to decrease gas emissions without any other negative consequence on the environment.

Comparative biochemical analyses of venous blood and peritoneal fluid from horses with colic using a portable analyser and an in-house analyser.

Science.gov (United States)

Saulez, M N; Cebra, C K; Dailey, M

2005-08-20

Fifty-six horses with colic were examined over a period of three months. The concentrations of glucose, lactate, sodium, potassium and chloride, and the pH of samples of blood and peritoneal fluid, were determined with a portable clinical analyser and with an in-house analyser and the results were compared. Compared with the in-house analyser, the portable analyser gave higher pH values for blood and peritoneal fluid with greater variability in the alkaline range, and lower pH values in the acidic range, lower concentrations of glucose in the range below 8.3 mmol/l, and lower concentrations of lactate in venous blood in the range below 5 mmol/l and in peritoneal fluid in the range below 2 mmol/l, with less variability. On average, the portable analyser underestimated the concentrations of lactate and glucose in peritoneal fluid in comparison with the in-house analyser. Its measurements of the concentrations of sodium and chloride in peritoneal fluid had a higher bias and were more variable than the measurements in venous blood, and its measurements of potassium in venous blood and peritoneal fluid had a smaller bias and less variability than the measurements made with the in-house analyser.

Sediment transport direction in fluviatile Karharbari sandstone, Giridih Basin, Bihar

Energy Technology Data Exchange (ETDEWEB)

Tewari, R C; Casshyap, S M

1978-01-01

The sandstone is pebbly, very coarse grained in the lower part, and coarse to medium grained in the upper part. Shale and coal respectively constitute 9 and 5% of the strata Small and large erosional channels and successive sets of large scale cross-bedding characterize the sandstone. Palaeo- currents reveal that the paleodrainage and sediment transport were dominantly directed from SSW to NNE.

Loss-of-coolant accident analyses of the Advanced Neutron Source Reactor

International Nuclear Information System (INIS)

Chen, N.C.J.; Yoder, G.L.; Wendel, M.W.

1991-01-01

Currently in the conceptual design stage, the Advanced Neutron Source Reactor (ANSR) will operate at a high heat flux, a high mass flux, an a high degree of coolant subcooling. Loss-of-coolant accident (LOCA) analyses using RELAP5 have been performed as part of an early evaluation of ANSR safety issues. This paper discusses the RELAP5 ANSR conceptual design system model and preliminary LOCA simulation results. Some previous studies were conducted for the preconceptual design. 12 refs., 7 figs

Direct Problems and Inverse Problems in Biometric Systems

OpenAIRE

Mihailescu Marius Iulian

2013-01-01

The article purpose is to describe the two sides of biometrics technologies, direct problems and inverse problems. The advance that we face today in field of Information Technology makes Information Security an inseparable part. The authentication has a huge role when we deal about security. The problems that can appear in implementing and developing biometrics systems is raising many problems, and one of the goal of this article is to focus on direct and inverse problems which is a new and c...

Radiochemical analyses of several spent fuel Approved Testing Materials

International Nuclear Information System (INIS)

Guenther, R.J.; Blahnik, D.E.; Wildung, N.J.

1994-09-01

Radiochemical characterization data are described for UO 2 and UO 2 plus 3 wt% Gd 2 O 3 commercial spent nuclear fuel taken from a series of Approved Testing Materials (ATMs). These full-length nuclear fuel rods include MLA091 of ATM-103, MKP070 of ATM-104, NBD095 and NBD131 of ATM-106, and ADN0206 of ATM-108. ATMs 103, 104, and 106 were all irradiated in the Calvert Cliffs Nuclear Power Plant (Reactor No.1), a pressurized-water reactor that used fuel fabricated by Combustion Engineering. ATM-108 was part of the same fuel bundle designed as ATM-105 and came from boiling-water reactor fuel fabricated by General Electric and irradiated in the Cooper Nuclear Power Plant. Rod average burnups and expected fission gas releases ranged from 2,400 to 3,700 GJ/kgM. (25 to 40 Mwd/kgM) and from less than 1% to greater than 10%, respectively, depending on the specific ATM. The radiochemical analyses included uranium and plutonium isotopes in the fuel, selected fission products in the fuel, fuel burnup, cesium and iodine on the inner surfaces of the cladding, 14 C in the fuel and cladding, and analyses of the gases released to the rod plenum. Supporting examinations such as fuel rod design and material descriptions, power histories, and gamma scans used for sectioning diagrams are also included. These ATMs were examined as part of the Materials Characterization Center Program conducted at Pacific Northwest Laboratory provide a source of well-characterized spent fuel for testing in support of the US Department of Energy Office of Civilian Radioactive Waste Management Program

The influence of the directivity of musical instruments in a room

DEFF Research Database (Denmark)

Otondo, Felipe; Rindel, Jens Holger

2004-01-01

Measurements of the directivity of musical instruments are presented as part of the study of the influence of their representation in room acoustic simulations and auralizations. Pairs of measured and averaged directivities have been used both for room simulation comparisons and as a basis...... for listening experiments with auralizations. Room simulation results show a clear influence of the changes in the representation directivity on the distribution of acoustical parameters in the room. The results of the listening experiments with auralizations show that some changes produced by directivity...

Neural Networks for Target Selection in Direct Marketing

NARCIS (Netherlands)

R. Potharst (Rob); U. Kaymak (Uzay); W.H.L.M. Pijls (Wim)

2001-01-01

textabstractPartly due to a growing interest in direct marketing, it has become an important application field for data mining. Many techniques have been applied to select the targets in commercial applications, such as statistical regression, regression trees, neural computing, fuzzy clustering

The dipole form of the quark part of the BFKL kernel

International Nuclear Information System (INIS)

Fadin, V.S.; Fiore, R.; Papa, A.

2007-01-01

The dipole form of the 'Abelian' part of the massless quark contribution to the BFKL kernel is found in the coordinate representation by direct transfer from the momentum representation where the contribution was calculated before. It coincides with the corresponding part of the quark contribution to the dipole kernel calculated recently by Balitsky and is conformal invariant

Loss of lateral prefrontal cortex control in food-directed attention and goal-directed food choice in obesity.

Science.gov (United States)

Janssen, Lieneke K; Duif, Iris; van Loon, Ilke; Wegman, Joost; de Vries, Jeanne H M; Cools, Roshan; Aarts, Esther

2017-02-01

Loss of lateral prefrontal cortex (lPFC)-mediated attentional control may explain the automatic tendency to eat in the face of food. Here, we investigate the neurocognitive mechanism underlying attentional bias to food words and its association with obesity using a food Stroop task. We tested 76 healthy human subjects with a wide body mass index (BMI) range (19-35kg/m 2 ) using fMRI. As a measure of obesity we calculated individual obesity scores based on BMI, waist circumference and waist-to-hip ratio using principal component analyses. To investigate the automatic tendency to overeat directly, the same subjects performed a separate behavioral outcome devaluation task measuring the degree of goal-directed versus automatic food choices. We observed that increased obesity scores were associated with diminished lPFC responses during food attentional bias. This was accompanied by decreased goal-directed control of food choices following outcome devaluation. Together these findings suggest that deficient control of both food-directed attention and choice may contribute to obesity, particularly given our obesogenic environment with food cues everywhere, and the choice to ignore or indulge despite satiety. Copyright © 2016 Elsevier Inc. All rights reserved.

Analyse technico-économique et évaluation de l’impact environnemental de la cuisson solaire directe au Maroc

Directory of Open Access Journals (Sweden)

Ndiaga MBODJI

2017-09-01

Full Text Available The objective of this study is to present a design methodology, carry out economic analysis and evaluate the environmental impact of direct solar cooking systems in Morocco. To satisfy the energy needs of a 5 people household, consuming a 3 kg meal at noon for a cooking time of 2.5 hours, a parabolic concentrator having a diameter of 1.4 m (useful area of 1.6 m² is required. At the household level, the economic analysis revealed that the payback period of a direct solar cooker compared to butane varies from 4 to 10 years, depending on the rate of public subsidy. Where firewood is used, the payback period varies from 0.6 to 10 years, depending on the stove performance and the firewood price. At the national level, a 50% subsidy of direct solar cookers with a penetration rate of 50% in rural areas requires a budget of 1.61 billion dirhams (1$US=10 Dirhams. This investment will allow the government to save 185 million dirhams a year in butane subsidies reduction, which corresponds to a payback period of about 8.7 years and a total profit of 1.45 billion dirhams over the cookers 15-year lifetime. On the ecological aspect, the area of forest saved would be about 10 000 ha/year, and the annual amount of CO2 emissions avoided would be 1.08 Mt/year.

Chemical analyses for selected wells in San Joaquin County and part of Contra Costa County, California

Science.gov (United States)

Keeter, Gail L.

1980-01-01

The study area of this report includes the eastern valley area of Contra Costa County and all of San Joaquin County, an area of approximately 1,600 square miles in the northern part of the San Joaquin Valley, Calif. Between December 1977 and December 1978, 1,489 wells were selectively canvassed. During May and June in 1978 and 1979, water samples were collected for chemical analysis from 321 of these wells. Field determinations of alkalinity, conductance, pH, and temperature were made, and individual constituents were analyzed. This report is the fourth in a series of baseline data reports on wells in the Sacramento and San Joaquin Valleys. (USGS)

Annual report 2005 General Direction of the Energy and raw materials

International Nuclear Information System (INIS)

2005-01-01

This 2005 annual report of the DGEMP (General Direction of the Energy and the raw Materials), takes stock on the energy bill and accounting of the France. The first part presents the electric power, natural gas and raw materials market in France. The second part is devoted to the diversification of the energy resources with a special attention to the renewable energies and the nuclear energy. The third part discusses the energy and raw materials prices and the last part presents the international cooperation in the energy domain. (A.L.B.)

Direct synthesis of organic silicates

International Nuclear Information System (INIS)

Gismalla, Hana Hassan

2000-06-01

Tetraethoxysilane was prepared using the direct synthetic procedure in presence of magnesium ethoxide, tin tetrachloride and tin oxide as catalysts. Magnesium ethoxide was prepared firstly, identified by spectral analysis and then used in the preparation of tetraethoxysilane. The method adopted is reliable and significant as far as synthetic routes are concerned. The product obtained was analysed using infra-red spectroscopy and gas-liquid chromatography, these indicated that the final reaction product can be obtained in high yield and purity. Spectral analysis obtained are in good agreement with reported data for tetraethoxysilane. (Author)

Direct measurement of γ-emitting radionuclides in waste drum

International Nuclear Information System (INIS)

Ma Ruwei; Mao Yong; Zhang Xiuzhen; Xia Xiaobin; Guo Caiping; Han Yueqin

1993-01-01

The low-level rad waste produced from nuclear power plant, nuclear facilities, and in the process of their decommissioning is stored in waste depository. For the safety of transport and storage of these wastes, some test must be done. One of them is to analyse the kinds and activities of radionuclides in each waste drum. Segmented scanning gamma spectrum analysis can be used for direct measurement of gamma-emitting radionuclides in drum. Gamma emitters such as Co-60, Cs-137, Ra-226 can be measured directly from outside of drum. A method and system for direct measuring gamma emitters in waste drum are described, and measuring apparatus and measurement results as well

Occupant Kinematics in Simulated Autonomous Driving Vehicle Collisions: Influence of Seating Position, Direction and Angle.

Science.gov (United States)

Kitagawa, Yuichi; Hayashi, Shigeki; Yamada, Katsunori; Gotoh, Mitsuaki

2017-11-01

This two-part study analyzed occupant kinematics in simulated collisions of future automated driving vehicles in terms of seating configuration. In part one, a frontal collision was simulated with four occupants with the front seats reversed. The left front seat occupant was unbelted while the others were belted. In part two of the study, occupant restraint was examined in various seating configurations using a single seat model with a three-point seatbelt. The seat direction with respect to impact was considered as forward, rearward, and lateral facing in 45 degree increments. The effect of seat recline was also studied in the forward-facing and rear-facing cases by assuming three positions: driving position, resting position and relaxed position. Occupants were represented by human body finite element models. The results of part one showed that the front seat (rear-facing) occupants were restrained by the seatback, resulting in T1 forward displacement less than 100 mm; the rear seat occupants were restrained by the seatbelt resulting larger T1 forward displacement more than 500 mm. The results of the part two showed the directional dependence of occupant restraint. Greater T1 displacements were observed when the occupant faced lateral or front oblique. However, the seatbelt provided some restraint in all directions considered. The seatback generated contact force to the occupant when it was in the impact direction, including the lateral directions. The relaxed position allowed increased excursion compared to the driving position when the occupant faced rearward, but the magnitude of this increase was lower with lower impact speed.

Direct olive oil analysis by mass spectrometry: A comparison of different ambient ionization methods.

Science.gov (United States)

Lara-Ortega, Felipe J; Beneito-Cambra, Miriam; Robles-Molina, José; García-Reyes, Juan F; Gilbert-López, Bienvenida; Molina-Díaz, Antonio

2018-04-01

Analytical methods based on ambient ionization mass spectrometry (AIMS) combine the classic outstanding performance of mass spectrometry in terms of sensitivity and selectivity along with convenient features related to the lack of sample workup required. In this work, the performance of different mass spectrometry-based methods has been assessed for the direct analyses of virgin olive oil for quality purposes. Two sets of experiments have been setup: (1) direct analysis of untreated olive oil using AIMS methods such as Low-Temperature Plasma Mass Spectrometry (LTP-MS) or paper spray mass spectrometry (PS-MS); or alternatively (2) the use of atmospheric pressure ionization (API) mass spectrometry by direct infusion of a diluted sample through either atmospheric pressure chemical ionization (APCI) or electrospray (ESI) ionization sources. The second strategy involved a minimum sample work-up consisting of a simple olive oil dilution (from 1:10 to 1:1000) with appropriate solvents, which originated critical carry over effects in ESI, making unreliable its use in routine; thus, ESI required the use of a liquid-liquid extraction to shift the measurement towards a specific part of the composition of the edible oil (i.e. polyphenol rich fraction or lipid/fatty acid profile). On the other hand, LTP-MS enabled direct undiluted mass analysis of olive oil. The use of PS-MS provided additional advantages such as an extended ionization coverage/molecular weight range (compared to LTP-MS) and the possibility to increase the ionization efficiency towards nonpolar compounds such as squalene through the formation of Ag + adducts with carbon-carbon double bounds, an attractive feature to discriminate between oils with different degree of unsaturation. Copyright © 2017 Elsevier B.V. All rights reserved.

Critical and Alternative Directions in Applied Linguistics

Science.gov (United States)

Pennycook, Alastair

2010-01-01

Critical directions in applied linguistics can be understood in various ways. The term "critical" as it has been used in "critical applied linguistics," "critical discourse analysis," "critical literacy" and so forth, is now embedded as part of applied linguistic work, adding an overt focus on questions of power and inequality to discourse…

Cross sections for multistep direct reactions

International Nuclear Information System (INIS)

Demetriou, Paraskevi; Marcinkowski, Andrzej; Marianski, Bohdan

2002-01-01

Inelastic scattering and charge-exchange reactions have been analysed at energies ranging from 14 to 27 MeV using the modified multistep direct reaction theory (MSD) of Feshbach, Kerman and Koonin. The modified theory considers the non-DWBA matrix elements in the MSD cross section formulae and includes both incoherent particle-hole excitations and coherent collective excitations in the continuum, according to the prescriptions. The results show important contributions from multistep processes at all energies considered. (author)

Modeling of microstructure evolution in direct metal laser sintering: A phase field approach

Science.gov (United States)

Nandy, Jyotirmoy; Sarangi, Hrushikesh; Sahoo, Seshadev

2017-02-01

Direct Metal Laser Sintering (DMLS) is a new technology in the field of additive manufacturing, which builds metal parts in a layer by layer fashion directly from the powder bed. The process occurs within a very short time period with rapid solidification rate. Slight variations in the process parameters may cause enormous change in the final build parts. The physical and mechanical properties of the final build parts are dependent on the solidification rate which directly affects the microstructure of the material. Thus, the evolving of microstructure plays a vital role in the process parameters optimization. Nowadays, the increase in computational power allows for direct simulations of microstructures during materials processing for specific manufacturing conditions. In this study, modeling of microstructure evolution of Al-Si-10Mg powder in DMLS process was carried out by using a phase field approach. A MATLAB code was developed to solve the set of phase field equations, where simulation parameters include temperature gradient, laser scan speed and laser power. The effects of temperature gradient on microstructure evolution were studied and found that with increase in temperature gradient, the dendritic tip grows at a faster rate.

Transient direct-contact condensation on liquid droplets

International Nuclear Information System (INIS)

Pasamehmetoglu, K.O.; Nelson, R.A.

1987-01-01

In this paper, direct-contact condensation on subcooled liquid droplets is studied in two parts. In the first part, simple design correlations for the condensation in a steady environment are developed based upon a conduction model. These correlations include the convective heat-transfer coefficient, condensation rate, total condensation, and the droplet-thermalization time. In the second part of the paper, the effect of a time-dependent saturation temperature on the condensation process is investigated. A rapid decrease in saturation temperature is typical of condensation environments in which the steam-supply rate is limited and condensation-induced depressurization becomes important. Design correlations are developed for condensation in an environment in which the saturation temperature decreases linearly with time. These correlations are graphically compared to the design correlations of the first part through a quasi-steady approach. The error associated with this approach is quantified as a function of the rate of change of the saturation temperature

The search for and analysis of direct samples of early Solar System aqueous fluids.

Science.gov (United States)

Zolensky, Michael E; Bodnar, Robert J; Yurimoto, Hisayoshi; Itoh, Shoichi; Fries, Marc; Steele, Andrew; Chan, Queenie H-S; Tsuchiyama, Akira; Kebukawa, Yoko; Ito, Motoo

2017-05-28

We describe the current state of the search for direct, surviving samples of early, inner Solar System fluids-fluid inclusions in meteorites. Meteoritic aqueous fluid inclusions are not rare, but they are very tiny and their characterization is at the state of the art for most analytical techniques. Meteoritic fluid inclusions offer us a unique opportunity to study early Solar System brines in the laboratory. Inclusion-by-inclusion analyses of the trapped fluids in carefully selected samples will, in the immediate future, provide us detailed information on the evolution of fluids as they interacted with anhydrous solid materials. Thus, real data can replace calculated fluid compositions in thermochemical calculations of the evolution of water and aqueous reactions in comets, asteroids, moons and the terrestrial planets.This article is part of the themed issue 'The origin, history and role of water in the evolution of the inner Solar System'. © 2017 The Author(s).

Transport and hydrodynamic calculations of direct photons at FAIR

International Nuclear Information System (INIS)

Baeuchle, Bjorn; Bleicher, Marcus

2011-01-01

The microscopic transport model UrQMD and a micro + macro hybrid model are used to calculate direct photon spectra from U+U-collisions at E lab =35 A GeV as will be measured by the CBM Collaboration at FAIR. In the hybrid model, the intermediate high-density part of the nuclear interaction is described with ideal 3+1-dimensional hydrodynamics. Different equations of state of the matter created in the heavy-ion collisions are investigated and the resulting spectra of direct photons are predicted. The emission patterns of direct photons in space and time are discussed.

77 FR 46946 - Airworthiness Directives; Dassault Aviation Airplanes

Science.gov (United States)

2012-08-07

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA-2012... of Transportation (DOT). ACTION: Final rule. SUMMARY: We are adopting a new airworthiness directive... of the oxygen pipe developing a crack. This AD requires modifying the routing of and, if necessary...

Organic and conventional fertilisation procedures on the nitrate, antioxidants and pesticide content in parts of vegetables.

Science.gov (United States)

Lima, G P P; Teixeira da Silva, Jaime A; Bernhard, A B; Pirozzi, D C Z; Fleuri, L F; Vianello, F

2012-01-01

Different parts of plant foods are generally discarded by consumers such as peel, stalk and leaves, which could however possess a nutritional value. However, few studies have analysed the composition of these marginal foods. The phenolic compound, flavonoid, polyamine, nitrate and pesticide contents of parts of vegetables that are usually discarded--but which were cultivated according to conventional and non-conventional procedures--were analysed to provide suggestions on how to improve the consumption of these parts and to reduce the production of urban solid waste. Few, but significant, differences between the two manuring procedures were observed. Higher nitrate content and the presence of organochlorine pesticides were found in conventional cultivated papaya peel, lemon balm leaves, jack fruit pulp, and beet stalk and peel. Discarded parts of plant foods such as stalk, leaves and peels can be used as a source of antioxidant compounds, such as phenolic compounds.

Elastic meson-nucleon partial wave scattering analyses

International Nuclear Information System (INIS)

Arndt, R.A.

1986-01-01

Comprehensive analyses of π-n elastic scattering data below 1100 MeV(Tlab), and K+p scattering below 3 GeV/c(Plab) are discussed. Also discussed is a package of computer programs and data bases (scattering data, and solution files) through which users can ''explore'' these interactions in great detail; this package is known by the acronym SAID (for Scattering Analysis Interactive Dialin) and is accessible on VAX backup tapes, or by dialin to the VPI computers. The π-n, and k+p interactions will be described as seen through the SAID programs. A procedure will be described for generating an interpolating array from any of the solutions encoded in SAID; this array can then be used through a fortran callable subroutine (supplied as part of SAID) to give excellent amplitude reconstructions over a broad kinematic range

Parts, Materials, and Processes Control Program for Expendable Launch Vehicles

Science.gov (United States)

2015-05-21

cycle cost ; and 4. Improve procurement and test of small quantities of parts and materials that meet system requirements. This document supersedes...the reliability of program PMP to reduce PMP failures at all levels of assembly and test 3. Reduce program lifecycle cost 4. Improve procurement and...part shall be procured in single lots directly from the manufacturer or its authorized franchised distributor. The contractor shall be able to

A Method of Poisson's Ration Imaging Within a Material Part

Science.gov (United States)

Roth, Don J. (Inventor)

1994-01-01

The present invention is directed to a method of displaying the Poisson's ratio image of a material part. In the present invention, longitudinal data is produced using a longitudinal wave transducer and shear wave data is produced using a shear wave transducer. The respective data is then used to calculate the Poisson's ratio for the entire material part. The Poisson's ratio approximations are then used to display the data.

Relationships of Indoor, Outdoor, and Personal Air (RIOPA). Part I. Collection methods and descriptive analyses.

Science.gov (United States)

Weisel, Clifford P; Zhang, Junfeng; Turpin, Barbara J; Morandi, Maria T; Colome, Steven; Stock, Thomas H; Spektor, Dalia M; Korn, Leo; Winer, Arthur M; Kwon, Jaymin; Meng, Qing Yu; Zhang, Lin; Harrington, Robert; Liu, Weili; Reff, Adam; Lee, Jong Hoon; Alimokhtari, Shahnaz; Mohan, Kishan; Shendell, Derek; Jones, Jennifer; Farrar, L; Maberti, Slivia; Fan, Tina

2005-11-01

This study on the relationships of indoor, outdoor, and personal air (RIOPA) was undertaken to collect data for use in evaluating the contribution of outdoor sources of air toxics and particulate matter (PM) to personal exposure. The study was not designed to obtain a population-based sample, but rather to provide matched indoor, outdoor, and personal concentrations in homes that varied in their proximity to outdoor pollution sources and had a wide range of air exchange rates (AERs). This design allowed examination of relations among indoor, outdoor, and personal concentrations of air toxics and PM across a wide range of environmental conditions; the resulting data set obtained for a wide range of environmental pollutants and AERs can be used to evaluate exposure models. Approximately 100 households with residents who do not smoke participated in each of three cities in distinct locations expected to have different climates and housing characteristics: Elizabeth, New Jersey; Houston, Texas; and Los Angeles County, California. Questionnaires were administered to characterize homes, neighborhoods, and personal activities that might affect exposures. The concentrations of a suite of volatile organic compounds (VOCs) and carbonyl compounds, as well as the fraction of airborne particulate matter with a mass median aerodynamic diameter personal air samples were collected simultaneously. During the same 48-hour period, the AER (exchanges/hr; x hr(-1)) was determined in each home, and carbonyl compounds were measured inside vehicle cabins driven by a subset of the participants. In most of the homes, measurements were made twice, during two different seasons, to obtain a wide distribution of AERs. This report presents in detail the data collection methods, quality control measures, and initial analyses of data distributions and relations among indoor, outdoor, and personal concentrations. The results show that indoor sources dominated personal and indoor air concentrations

OECD-LOFT large break LOCA experiments: phenomenology and computer code analyses

International Nuclear Information System (INIS)

Brittain, I.; Aksan, S.N.

1990-08-01

Large break LOCA data from LOFT are a very important part of the world database. This paper describes the two double-ended cold leg break tests LP-02-6 and LP-LB-1 carried out within the OECD-LOFT Programme. Tests in LOFT were the first to show the importance of both bottom-up and top-down quenching during blowdown in removing stored energy from the fuel. These phenomena are discussed in detail, together with the related topics of the thermal performance of nuclear fuel and its simulation by electric fuel rod simulators, and the accuracy of cladding external thermocouples. The LOFT data are particularly important in the validation of integral thermal-hydraulics codes such as TRAC and RELAP5. Several OECD partner countries contributed analyses of the large break tests. Results of these analyses are summarised and some conclusions drawn. 32 figs., 3 tabs., 45 refs

Orbitrap-based mass analyser for in-situ characterization of asteroids: ILMA, Ion Laser Mass Analyser

Science.gov (United States)

Briois, C.; Cotti, H.; Thirkell, L.; Space Orbitrap Consortium[K. Aradj, French; Bouabdellah, A.; Boukrara, A.; Carrasco, N.; Chalumeau, G.; Chapelon, O.; Colin, F.; Coll, P.; Engrand, C.; Grand, N.; Kukui, A.; Lebreton, J.-P.; Pennanech, C.; Szopa, C.; Thissen, R.; Vuitton, V.; Zapf], P.; Makarov, A.

2014-07-01

Since about a decade the boundaries between comets and carbonaceous asteroids are fading [1,2]. No doubt that the Rosetta mission should bring a new wealth of data on the composition of comets. But as promising as it may look, the mass resolving power of the mass spectrometers onboard (so far the best on a space mission) will only be able to partially account for the diversity of chemical structures present. ILMA (Ion-Laser Mass Analyser) is a new generation high mass resolution LDI-MS (Laser Desorption-Ionization Mass Spectrometer) instrument concept using the Orbitrap technique, which has been developed in the frame of the two Marco Polo & Marco Polo-R proposals to the ESA Cosmic Vision program. Flagged by ESA as an instrument concept of interest for the mission in 2012, it has been under study for a few years in the frame of a Research and Technology (R&T) development programme between 5 French laboratories (LPC2E, IPAG, LATMOS, LISA, CSNSM) [3,4], partly funded by the French Space Agency (CNES). The work is undertaken in close collaboration with the Thermo Fisher Scientific Company, which commercialises Orbitrap-based laboratory instruments. The R&T activities are currently concentrating on the core elements of the Orbitrap analyser that are required to reach a sufficient maturity level for allowing design studies of future space instruments. A prototype is under development at LPC2E and a mass resolution (m/Δm FWHM) of 100,000 as been obtained at m/z = 150 for a background pressure of 10^{-8} mbar. ILMA would be a key instrument to measure the molecular, elemental and isotopic composition of objects such as carbonaceous asteroids, comets, or other bodies devoid of atmosphere such as the surface of an icy satellite, the Moon, or Mercury.

Behavioural changes, sharing behaviour and psychological responses after receiving direct-to-consumer genetic test results: a systematic review and meta-analysis.

Science.gov (United States)

Stewart, Kelly F J; Wesselius, Anke; Schreurs, Maartje A C; Schols, Annemie M W J; Zeegers, Maurice P

2018-01-01

It has been hypothesised that direct-to-consumer genetic tests (DTC-GTs) could stimulate health behaviour change. However, genetic testing may also lead to anxiety and distress or unnecessarily burden the health care system. The aim is to review and meta-analyse the effects of DTC-GT on (1) behaviour change, (2) psychological response and (3) medical consumption. A systematic literature search was performed in three databases, using "direct-to-consumer genetic testing" as a key search term. Random effects meta-analyses were performed when at least two comparable outcomes were available. After selection, 19 articles were included involving 11 unique studies. Seven studies involved actual consumers who paid the retail price, whereas four included participants who received free genetic testing as part of a research trial (non-actual consumers). In meta-analysis, 23% had a positive lifestyle change. More specifically, improved dietary and exercise practices were both reported by 12%, whereas 19% quit smoking. Seven percent of participants had subsequent preventive checks. Thirty-three percent shared their results with any health care professional and 50% with family and/or friends. Sub-analyses show that behaviour change was more prevalent among non-actual consumers, whereas sharing was more prevalent among actual consumers. Results on psychological responses showed that anxiety, distress and worry were low or absent and that the effect faded with time. DTC-GT has potential to be effective as a health intervention, but the right audience needs to be addressed with tailored follow-up. Research is needed to identify consumers who do and do not change behaviour or experience adverse psychological responses.

Evolution of group-wise cooperation: Is direct reciprocity insufficient?

Science.gov (United States)

Kurokawa, Shun; Ihara, Yasuo

2017-02-21

Group-wise cooperation, or cooperation among three or more individuals, is an integral part of human societies. It is likely that group-wise cooperation also played a crucial role in the survival of early hominins, who were confronted with novel environmental challenges, long before the emergence of Homo sapiens. However, previous theoretical and empirical studies, focusing mainly on modern humans, have tended to suggest that evolution of cooperation in sizable groups cannot be explained by simple direct reciprocity and requires some additional mechanisms (reputation, punishment, etc.), which are cognitively too demanding for early hominins. As a partial resolution of the paradox, our recent analysis of a stochastic evolutionary model, which considers the effect of random drift, has revealed that evolution of group-wise cooperation is more likely to occur in larger groups when an individual's share of the benefit produced by one cooperator does not decrease with increasing group size (i.e., goods are non-rivalrous). In this paper, we further extend our previous analysis to explore possible consequences of introducing rare mistakes in behavior or imperfect information about behavior of others on the model outcome. Analyses of the extended models show that evolution of group-wise cooperation can be facilitated by large group size even when individuals intending to cooperate sometimes fail to do so or when all the information about the past behavior of group members is not available. We argue, therefore, that evolution of cooperation in sizable groups does not necessarily require other mechanisms than direct reciprocity if the goods to be produced via group-wise cooperation are non-rivalrous. Copyright © 2016 Elsevier Ltd. All rights reserved.

Database on wind characteristics - Analyses of wind turbine design loads

Energy Technology Data Exchange (ETDEWEB)

Larsen, G.C.; Hansen, K.S.

2004-06-01

The main objective of IEA R and D Wind Annex XVII - Database on Wind Characteristics - has been to provide wind energy planners, designers and researchers, as well as the international wind engineering community in general, with a source of actual wind field data (time series and resource data) observed in a wide range of different wind climates and terrain types. Connected to an extension of the initial Annex period, the scope for the continuation was widened to include also support to the international wind turbine standardisation efforts.. The project partners are Sweden, Norway, U.S.A., The Netherlands and Denmark, with Denmark as the Operating Agent. The reporting of the continuation of Annex XVII falls in two separate parts. Part one accounts in details for the available data in the established database bank, and part two describes various data analyses performed with the overall purpose of improving the design load cases with relevance for to wind turbine structures. The present report constitutes the second part of the Annex XVII reporting. Both fatigue and extreme load aspects are dealt with, however, with the main emphasis on the latter. The work has been supported by The Ministry of Environment and Energy, Danish Energy Agency, The Netherlands Agency for Energy and the Environment (NOVEM), The Norwegian Water Resources and Energy Administration (NVE), The Swedish National Energy Administration (STEM) and The Government of the United States of America. (au)

Bisphenol A in Edible Part of Seafood

Science.gov (United States)

Repossi, Adele; Farabegoli, Federica; Zironi, Elisa; Pagliuca, Giampiero

2016-01-01

Bisphenol A (BPA) is a man-made compound, mainly used as a monomer to produce polycarbonate (PC), epoxy resins, non-polymer additives to other plastics, which have many food related applications, such as food storage containers, tableware and internal coating of cans, as well as non-food applications such as electronic equipment, construction materials and medical devices. BPA exposure can occur when the residual monomer migrates into packaged food and beverages. Moreover, due to the ubiquitous presence of this compound, the general population can be exposed to environmental sources such as water, air and soil. Many studies have investigated the potential health hazards associated with BPA, which can elicit toxic and cancerogenic effects on humans. According to the European Food Safety Authority opinion, diet is considered to be the main source of exposure, especially canned food; moreover, among non-canned food, meat and fish products have the highest levels of BPA contamination. This review focuses on BPA contamination in seafood, analysing worldwide literature (from January 2010 to October 2015) on BPA contamination of edible parts. The authors try to identify differences between canned and non-canned seafood in literature, and gaps in the state of art. The data evaluated underline that all concentrations for both canned and non-canned seafood were below the specific migration limit set by the European Community Directive for BPA in food. Moreover, the canned seafood is more contaminated than the non-canned one. PMID:27800447

Bisphenol A in Edible Part of Seafood.

Science.gov (United States)

Repossi, Adele; Farabegoli, Federica; Gazzotti, Teresa; Zironi, Elisa; Pagliuca, Giampiero

2016-04-19

Bisphenol A (BPA) is a man-made compound, mainly used as a monomer to produce polycarbonate (PC), epoxy resins, non-polymer additives to other plastics, which have many food related applications, such as food storage containers, tableware and internal coating of cans, as well as non-food applications such as electronic equipment, construction materials and medical devices. BPA exposure can occur when the residual monomer migrates into packaged food and beverages. Moreover, due to the ubiquitous presence of this compound, the general population can be exposed to environmental sources such as water, air and soil. Many studies have investigated the potential health hazards associated with BPA, which can elicit toxic and cancerogenic effects on humans. According to the European Food Safety Authority opinion, diet is considered to be the main source of exposure, especially canned food; moreover, among non-canned food, meat and fish products have the highest levels of BPA contamination. This review focuses on BPA contamination in seafood, analysing worldwide literature (from January 2010 to October 2015) on BPA contamination of edible parts. The authors try to identify differences between canned and non-canned seafood in literature, and gaps in the state of art. The data evaluated underline that all concentrations for both canned and non-canned seafood were below the specific migration limit set by the European Community Directive for BPA in food. Moreover, the canned seafood is more contaminated than the non-canned one.

Bisphenol A in edible part of seafood

Directory of Open Access Journals (Sweden)

Adele Repossi

2016-05-01

Full Text Available Bisphenol A (BPA is a man-made compound, mainly used as a monomer to produce polycarbonate (PC, epoxy resins, non-polymer additives to other plastics, which have many food related applications, such as food storage containers, tableware and internal coating of cans, as well as non-food applications such as electronic equipment, construction materials and medical devices. BPA exposure can occur when the residual monomer migrates into packaged food and beverages. Moreover, due to the ubiquitous presence of this compound, the general population can be exposed to environmental sources such as water, air and soil. Many studies have investigated the potential health hazards associated with BPA, which can elicit toxic and cancerogenic effects on humans. According to the European Food Safety Authority opinion, diet is considered to be the main source of exposure, especially canned food; moreover, among non-canned food, meat and fish products have the highest levels of BPA contamination. This review focuses on BPA contamination in seafood, analysing worldwide literature (from January 2010 to October 2015 on BPA contamination of edible parts. The authors try to identify differences between canned and non-canned seafood in literature, and gaps in the state of art. The data evaluated underline that all concentrations for both canned and non-canned seafood were below the specific migration limit set by the European Community Directive for BPA in food. Moreover, the canned seafood is more contaminated than the non-canned one.

Signal Transduction Pathways of TNAP: Molecular Network Analyses.

Science.gov (United States)

Négyessy, László; Györffy, Balázs; Hanics, János; Bányai, Mihály; Fonta, Caroline; Bazsó, Fülöp

2015-01-01

Despite the growing body of evidence pointing on the involvement of tissue non-specific alkaline phosphatase (TNAP) in brain function and diseases like epilepsy and Alzheimer's disease, our understanding about the role of TNAP in the regulation of neurotransmission is severely limited. The aim of our study was to integrate the fragmented knowledge into a comprehensive view regarding neuronal functions of TNAP using objective tools. As a model we used the signal transduction molecular network of a pyramidal neuron after complementing with TNAP related data and performed the analysis using graph theoretic tools. The analyses show that TNAP is in the crossroad of numerous pathways and therefore is one of the key players of the neuronal signal transduction network. Through many of its connections, most notably with molecules of the purinergic system, TNAP serves as a controller by funnelling signal flow towards a subset of molecules. TNAP also appears as the source of signal to be spread via interactions with molecules involved among others in neurodegeneration. Cluster analyses identified TNAP as part of the second messenger signalling cascade. However, TNAP also forms connections with other functional groups involved in neuronal signal transduction. The results indicate the distinct ways of involvement of TNAP in multiple neuronal functions and diseases.

33 CFR 106.140 - Maritime Security (MARSEC) Directive.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Maritime Security (MARSEC... SECURITY MARITIME SECURITY MARINE SECURITY: OUTER CONTINENTAL SHELF (OCS) FACILITIES General § 106.140 Maritime Security (MARSEC) Directive. All OCS facility owners or operators subject to this part must comply...

Synthesis of Directional Sources Using Wave Field Synthesis, Possibilities, and Limitations

Directory of Open Access Journals (Sweden)

Corteel E

2007-01-01

Full Text Available The synthesis of directional sources using wave field synthesis is described. The proposed formulation relies on an ensemble of elementary directivity functions based on a subset of spherical harmonics. These can be combined to create and manipulate directivity characteristics of the synthesized virtual sources. The WFS formulation introduces artifacts in the synthesized sound field for both ideal and real loudspeakers. These artifacts can be partly compensated for using dedicated equalization techniques. A multichannel equalization technique is shown to provide accurate results thus enabling for the manipulation of directional sources with limited reconstruction artifacts. Applications of directional sources to the control of the direct sound field and the interaction with the listening room are discussed.

Directionality analysis on functional magnetic resonance imaging during motor task using Granger causality.

Science.gov (United States)

Anwar, A R; Muthalib, M; Perrey, S; Galka, A; Granert, O; Wolff, S; Deuschl, G; Raethjen, J; Heute, U; Muthuraman, M

2012-01-01

Directionality analysis of signals originating from different parts of brain during motor tasks has gained a lot of interest. Since brain activity can be recorded over time, methods of time series analysis can be applied to medical time series as well. Granger Causality is a method to find a causal relationship between time series. Such causality can be referred to as a directional connection and is not necessarily bidirectional. The aim of this study is to differentiate between different motor tasks on the basis of activation maps and also to understand the nature of connections present between different parts of the brain. In this paper, three different motor tasks (finger tapping, simple finger sequencing, and complex finger sequencing) are analyzed. Time series for each task were extracted from functional magnetic resonance imaging (fMRI) data, which have a very good spatial resolution and can look into the sub-cortical regions of the brain. Activation maps based on fMRI images show that, in case of complex finger sequencing, most parts of the brain are active, unlike finger tapping during which only limited regions show activity. Directionality analysis on time series extracted from contralateral motor cortex (CMC), supplementary motor area (SMA), and cerebellum (CER) show bidirectional connections between these parts of the brain. In case of simple finger sequencing and complex finger sequencing, the strongest connections originate from SMA and CMC, while connections originating from CER in either direction are the weakest ones in magnitude during all paradigms.

Decreased Odds of Injection Risk Behavior Associated With Direct Versus Indirect Use of Syringe Exchange: Evidence From Two California Cities.

Science.gov (United States)

Behrends, Czarina N; Li, Chin-Shang; Gibson, David R

2017-07-29

While there is substantial evidence that syringe exchange programs (SEPs) are effective in preventing HIV among people who inject drugs (PWID), nearly all the evidence comes from PWID who obtain syringes from an SEP directly. Much less is known about the benefits of secondary exchange to PWID who get syringes indirectly from friends or acquaintances who visit an SEP for them. We evaluated the effectiveness of direct versus indirect syringe exchange in reducing HIV-related high-risk injecting behavior among PWID in two separate studies conducted in Sacramento and San Jose, California, cities with quite different syringe exchange models. In both studies associations between direct and indirect syringe exchange and self-reported risk behavior were examined with multivariable logistic regression models. Study 1 assessed effects of a "satellite" home-delivery syringe exchange in Sacramento, while Study 2 evaluated a conventional fixed-site exchange in San Jose. Multivariable analyses revealed 95% and 69% reductions, respectively, in high-risk injection associated with direct use of the SEPs in Sacramento and San Jose, and a 46% reduction associated with indirect use of the SEP in Sacramento. Conclusions/Importance: The very large effect of direct SEP use in Sacramento was likely due in part to home delivery of sterile syringes. While more modest effects were associated with indirect use, such use nevertheless is valuable in reducing the risk of HIV transmission of PWID who are unable or unwilling to visit a syringe exchange.

Direct Visual Editing of Node Attributes in Graphs

Directory of Open Access Journals (Sweden)

Christian Eichner

2016-10-01

Full Text Available There are many expressive visualization techniques for analyzing graphs. Yet, there is only little research on how existing visual representations can be employed to support data editing. An increasingly relevant task when working with graphs is the editing of node attributes. We propose an integrated visualize-and-edit approach to editing attribute values via direct interaction with the visual representation. The visualize part is based on node-link diagrams paired with attribute-dependent layouts. The edit part is as easy as moving nodes via drag-and-drop gestures. We present dedicated interaction techniques for editing quantitative as well as qualitative attribute data values. The benefit of our novel integrated approach is that one can directly edit the data while the visualization constantly provides feedback on the implications of the data modifications. Preliminary user feedback indicates that our integrated approach can be a useful complement to standard non-visual editing via external tools.

Early Studies of Binocular and Binaural Directions

Directory of Open Access Journals (Sweden)

Nicholas J. Wade

2018-03-01

Full Text Available Understanding how the eyes work together to determine the direction of objects provided the impetus for examining integration of signals from the ears to locate sounds. However, the advantages of having two eyes were recorded long before those for two ears were appreciated. In part, this reflects the marked differences in how we can compare perception with one or two organs. It is easier to close one eye and examine monocular vision than to “close” one ear and study monaural hearing. Moreover, we can move our eyes either in the same or in opposite directions, but humans have no equivalent means of moving the ears in unison. Studies of binocular single vision can be traced back over two thousand years and they were implicitly concerned with visual directions from each eye. The location of any point in visual or auditory space can be described by specifying its direction and distance, from the vantage point of an observer. From the late 18th century experiments indicated that binocular direction involved an eye movement component and experimental studies of binaural direction commenced slightly later. However, these early binocular and binaural experiments were not incorporated into theoretical accounts until almost a century later. The early history of research on visual direction with two eyes is contrasted to that on auditory direction with two ears.

Structure Property Studies for Additively Manufactured Parts

Energy Technology Data Exchange (ETDEWEB)

Milenski, Helen M [Univ. of Mexico, Los Alamos, NM (United States); Schmalzer, Andrew Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kelly, Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2015-08-17

Since the invention of modern Additive Manufacturing (AM) processes engineers and designers have worked hard to capitalize on the unique building capabilities that AM allows. By being able to customize the interior fill of parts it is now possible to design components with a controlled density and customized internal structure. The creation of new polymers and polymer composites allow for even greater control over the mechanical properties of AM parts. One of the key reasons to explore AM, is to bring about a new paradigm in part design, where materials can be strategically optimized in a way that conventional subtractive methods cannot achieve. The two processes investigated in my research were the Fused Deposition Modeling (FDM) process and the Direct Ink Write (DIW) process. The objectives of the research were to determine the impact of in-fill density and morphology on the mechanical properties of FDM parts, and to determine if DIW printed samples could be produced where the filament diameter was varied while the overall density remained constant.

First principle analyses of direct bandgap solar cells with absorbing substrates versus mirrors

Energy Technology Data Exchange (ETDEWEB)

Kirk, Alexander P. [School of Electrical, Computer and Energy Engineering, Arizona State University, Tempe, Arizona 85287 (United States); Kirk, Wiley P. [Department of Materials Science and Engineering, University of Texas at Arlington, Arlington, Texas 76019 (United States)

2013-11-07

Direct bandgap InP, GaAs, CdTe, and Ga{sub 0.5}In{sub 0.5}P solar cells containing backside mirrors as well as parasitically absorbing substrates are analyzed for their limiting open circuit voltage and power conversion efficiency with comparison to record solar cells. From the principle of detailed balance, it is shown quantitatively that mirror solar cells have greater voltage and power conversion efficiency than their substrate counterparts. Next, the radiative recombination coefficient and maximum radiative lifetime of GaAs mirror and substrate solar cells are calculated and compared to the nonradiative Auger and Shockley-Read-Hall (SRH) lifetimes. Mirror solar cells have greater radiative lifetime than their substrate variants. Auger lifetime exceeds radiative lifetime for both substrate and mirror cells while SRH lifetime may be less or greater than radiative lifetime depending on trap concentration and capture cross section. Finally, the change in free energy of the photogenerated carriers is analyzed in a comparison between InP, GaAs, CdTe, and Ga{sub 0.5}In{sub 0.5}P mirror and substrate solar cells in order to characterize the relationship between solar photon quality and free energy management in solar cells with differing bandgaps. Wider bandgap visible threshold Ga{sub 0.5}In{sub 0.5}P solar cells make better use of the available change in free energy of the photogenerated charge carriers, even when normalized to the bandgap energy, than narrower bandgap near-IR threshold InP, GaAs, and CdTe solar cells.

Anatomy of the six-part all-partition array as used by Milton Babbitt

DEFF Research Database (Denmark)

Bemman, Brian; Meredith, David

permutations of 12-tone rows under the common class of musical equivalence relations, transposition, inversion, retrograde and retrograde inversion, and then organized into pairs of hexachordally combinatorial rows. The resultant pitch-class space is then partitioned into segment lengths of 12 integers...... or fewer distributed into a specified number of parts. Both its organization and number of parts are determined in part by the unique mathematical properties of all-combinatorial hexachords. Through analyses of two works representative of two types of six-part arrays, initial ground work is established...... for the automatic generation of the all-partition array structure. Preliminary concerns in the computational process are also addressed....

Preferences for Advance Directives in Korea

Directory of Open Access Journals (Sweden)

So-Sun Kim

2012-01-01

Full Text Available Background. The goal of advance directives is to help patients retain their dignity and autonomy by making their own decisions regarding end-stage medical treatment. The purpose of this study was to examine preferences of advance directives among general population in Korea. Method. A descriptive cross-sectional survey was performed from October 2007 to June 2008 in Seoul, Korea. A total of 336 city-dwelling adults self-administered the questionnaire and returned it via mail. Data analyses were conducted using SPSS 17.0. Results. Subjects reported the need for healthcare providers' detailed explanations and recommendations regarding end-of-life care. When there is no hope of recovery and death is imminent, most subjects did not want to receive cardiopulmonary resuscitation nor an IV or tube feeding. However, most of the subjects wanted pain management care. Conclusions. The present study showed that many Korean people have an interest in advance directives. The results show that the autonomy and dignity of patient have increased in importance. To provide better end-of-life care, there is a need to educate patients on the definition and intent of an advance directive. Additional proactive communication between patients and their caregivers should be educated to healthcare providers.

Directed light fabrication of rhenium components

Energy Technology Data Exchange (ETDEWEB)

Milewski, J.O.; Thoma, D.J.; Lewis, G.K.

1997-02-01

Directed Light Fabrication (DLF) is a direct metal deposition process that fuses powder, delivered by gas into the focal zone of a high powered laser beam to form fully dense near-net shaped components. This is accomplished in one step without the use of molds, dies, forming, pressing, sintering or forging equipment. DLF is performed in a high purity inert environment free from the contaminants associated with conventional processing such as oxide and carbon pickup, lubricants, binding agents, cooling or cleaning agents. Applications using rhenium have historically been limited in part by its workability and cost. This study demonstrates the ability to fuse rhenium metal powder, using a DLF machine, into free standing rods and describes the associated parameter study. Microstructural comparisons between DLF deposited rhenium and commercial rhenium sheet product is performed. This research combined with existing DLF technology demonstrates the feasibility of forming complex rhenium, metal shapes directly from powder.

Measurement of the vector analysing power of the reaction 19F(p vector,α0)16O in the energy range Esub(p) = 0.45 MeV to 0.85 MeV and studies of the level scheme of the 20Ne nucleus

International Nuclear Information System (INIS)

Traudt, O.

1979-01-01

The experimental study of the reaction 19 F(p,α 0 ) 16 0 was extended by a determination of the analysing power for the reaction in the energy range 454 keV 0 until 160 0 . By averaging of the proton spin angular distributions of the unpolarized cross section were also obtained. The angular distributions of these two observables were fitted by legendre polynomials. The results is a nonneglectable contribution of direct reactions and a new determination of a part of energylevels in 20 Ne. (orig./HSI) [de

Applying simulation to optimize plastic molded optical parts

Science.gov (United States)

Jaworski, Matthew; Bakharev, Alexander; Costa, Franco; Friedl, Chris

2012-10-01

Optical injection molded parts are used in many different industries including electronics, consumer, medical and automotive due to their cost and performance advantages compared to alternative materials such as glass. The injection molding process, however, induces elastic (residual stress) and viscoelastic (flow orientation stress) deformation into the molded article which alters the material's refractive index to be anisotropic in different directions. Being able to predict and correct optical performance issues associated with birefringence early in the design phase is a huge competitive advantage. This paper reviews how to apply simulation analysis of the entire molding process to optimize manufacturability and part performance.

Optimization of in-target yields for RIB production: Part 1: direct targets

International Nuclear Information System (INIS)

Chabod, S.; Thiolliere, N.; David, J.Ch.; Dore, D.; Ene, D.; Rapp, B.; Ridikas, D.; Chabod, S.; Blideanu, V.

2008-03-01

In the framework of the EURISOL-DS project and within Task-11, we have performed in-target yield calculations for different configurations of thick direct targets. The target materials tested are Al 2 O 3 , SiC, Pb(molten), Ta and UC 3 . The target was irradiated with protons of 0.5, 1.0, 1.5 and 2.0 GeV. The production rates have been computed using the MCNPX transport/generation code, coupled with the CINDER-90 evolution program. The yield distributions as a function of charge number Z and mass number A have been evaluated. Their production rates have been optimized for 11 selected elements (Li, Be, Ne, Mg, Ar, Ni, Ga, Kr, Hg, Sn and Fr) and 23 of their isotopes of interest. Finally, the isotopic distributions for each of these 11 elements have been optimized in terms of the target material, its geometry, and incident proton energy

The dipole form of the gluon part of the BFKL kernel

International Nuclear Information System (INIS)

Fadin, V.S.; Fiore, R.; Grabovsky, A.V.; Papa, A.

2007-01-01

The dipole form of the gluon part of the color singlet BFKL kernel in the next-to-leading order (NLO) is obtained in the coordinate representation by direct transfer from the momentum representation, where the kernel was calculated before. With this paper the transformation of the NLO BFKL kernel to the dipole form, started a few months ago with the quark part of the kernel, is completed

Sensing roughness and polish direction

DEFF Research Database (Denmark)

Jakobsen, Michael Linde; Olesen, Anders Sig; Larsen, Henning Engelbrecht

2016-01-01

As a part of the work carried out in a project supported by the Danish Council for Technology and Innovation, we have investigated the option of smoothing standard CNC-machined surfaces. In the process of constructing optical prototypes, involving custom-designed optics, the development cost...... and time consumption can become prohibitive in a research budget. Machining the optical surfaces directly is expensive and time consuming. Alternatively, a more standardized and cheaper machining method can be used, calling for the object to be manually polished. During the polishing process, the operator...... needs information about the RMS-value of the surface roughness and the current direction of the scratches introduced by the polishing process. The RMS-value indicates to the operator how far he is from the final finish, and the scratch orientation is often specified by the customer in order to avoid...

Research Pearls: The Significance of Statistics and Perils of Pooling. Part 3: Pearls and Pitfalls of Meta-analyses and Systematic Reviews.

Science.gov (United States)

Harris, Joshua D; Brand, Jefferson C; Cote, Mark P; Dhawan, Aman

2017-08-01

Within the health care environment, there has been a recent and appropriate trend towards emphasizing the value of care provision. Reduced cost and higher quality improve the value of care. Quality is a challenging, heterogeneous, variably defined concept. At the core of quality is the patient's outcome, quantified by a vast assortment of subjective and objective outcome measures. There has been a recent evolution towards evidence-based medicine in health care, clearly elucidating the role of high-quality evidence across groups of patients and studies. Synthetic studies, such as systematic reviews and meta-analyses, are at the top of the evidence-based medicine hierarchy. Thus, these investigations may be the best potential source of guiding diagnostic, therapeutic, prognostic, and economic medical decision making. Systematic reviews critically appraise and synthesize the best available evidence to provide a conclusion statement (a "take-home point") in response to a specific answerable clinical question. A meta-analysis uses statistical methods to quantitatively combine data from single studies. Meta-analyses should be performed with high methodological quality homogenous studies (Level I or II) or evidence randomized studies, to minimize confounding variable bias. When it is known that the literature is inadequate or a recent systematic review has already been performed with a demonstration of insufficient data, then a new systematic review does not add anything meaningful to the literature. PROSPERO registration and PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines assist authors in the design and conduct of systematic reviews and should always be used. Complete transparency of the conduct of the review permits reproducibility and improves fidelity of the conclusions. Pooling of data from overly dissimilar investigations should be avoided. This particularly applies to Level IV evidence, that is, noncomparative investigations

Evaluation of the Outside Workers Directive operational implementation. Report nr 299

International Nuclear Information System (INIS)

Vaillant, L.; Lefaure, C.

2006-08-01

As working arrangements for workers in all sectors have considerably changed, notably with an increased number of workers belonging to subcontracting companies and the development of self-employment, the issue of outside workers' radiation protection has become a very important one. This leaded to a new version of the BSS (Basic Safety Standards) European directive (Council Directive 90/641/Euratom) to ensure that the radiological protection of outside workers is equivalent to that offered to workers permanently employed by operators of the controlled areas. The main objectives of this survey are to: identify problems with the implementation in connection with the new Directive, identify necessary changes and adaptations in the context of a possible revision of the Outside Workers Directive. The first part of this document aims at reviewing the measures taken by EC Members States, Candidate Countries, Switzerland and Norway for the operational implementation of the Outside Workers Directive. As far as possible, a particular attention has been paid to the situation in New Members States. The second part of this document exposes key issues and recommendations for outside workers' radiation protection that were discussed during a Seminar held at the EC facilities in Luxembourg on 29 and 30 November 2005

Axial mercury segregation in direct current operated low-pressure argon-mercury gas discharge: Part II. Model

International Nuclear Information System (INIS)

Gielen, John W A M; Groot, Simon de; Dijk, Jan van; Mullen, Joost J A M van der

2004-01-01

In a previous paper we had presented experimental results on mercury segregation due to cataphoresis in direct current operated low-pressure argon-mercury gas discharges. In this paper, we present our model to describe cataphoretic segregation in argon (or another noble gas)-mercury discharges. The model is based on the balance equations for mass and momentum and includes electrophoresis effects of electrons on mercury. Good agreement is found between the experimental results and model calculations. The model confirms our experimental observation that the mercury vapour pressure gradient depends on the local mercury vapour pressure. Furthermore, the model predicts the reversal of the direction of the transport of mercury under certain conditions (the phenomenon known as retrograde cataphoresis)

Casting traceability with direct part marking using reconfigurable pin-type tooling based on paraffin–graphite actuators

DEFF Research Database (Denmark)

Vedel-Smith, Nikolaj Kjelgaard; Lenau, Torben Anker

2012-01-01

Green sand moulding machines for cast iron foundries are presently unable to uniquely identify individual castings. An insert tool concept is developed and tested via incremental mock-up development. The tool is part of the pattern plate and changes shape between each moulding, thus giving each...... mould a unique ID by embossing a Data Matrix symbol into the sand. In the process of producing the mould, each casting can be given a unique (DPM), enabling part tracking throughout the casting's life cycle. Sand embossing is achieved with paraffin-actuated reconfigurable pin-type tooling under...... simulated processing conditions. The marker geometry limitations have been tested using static symbol patterns, both for sand embossing and actual casting marking. The marked castings have successfully been identified with decoding software. The study shows that the function of each element...

Numerical analyses of the effect of SG-interlayer shear stiffness on the structural performance of reinforced glass beams

DEFF Research Database (Denmark)

Louter, C.; Nielsen, Jens Henrik

2013-01-01

This paper focuses on the numerical modelling of SentryGlas-laminated reinforced glass beams. In these beams, which have been experimentally investigated in preceding research, a stainless steel reinforcement section is laminated at the inner recessed edge of a triple-layer glass beam by means...... of SentryGlas (SG) interlayer sheets. The current contribution numerically investigates the effect of the SG-interlayer shear stiffness on the overall structural response of the beams. This is done by means of a 3D finite element model in which the individual glass layers, the SG......-interlayers and the reinforcement are incorporated. In the model, the glass parts are allowed to crack, but all other parts are assumed linear elastic throughout the analyses. By changing the shear modulus of the SG-interlayer in multiple analyses, its contribution to the overall structural performance of the beams - especially...

The influence of the technologically advanced evacuation models on the risk analyses during accidents in LNG terminal

Energy Technology Data Exchange (ETDEWEB)

Stankovicj, Goran; Petelin, Stojan [Faculty for Maritime Studies and Transport, University of Ljubljana, Portorozh (Sierra Leone); others, and

2014-07-01

The evacuation of people located in different safety zones of an LNG terminal is a complex problem considering that the accidents involving LNG are very hazardous and post the biggest threat to the safety of the people located near the LNG leakage. The safety risk criteria define the parameters which one LNG terminal should meet in terms of safety. Those criteria also contain an evacuation as an evasive action with the objective to mitigate the influence of the LNG accident on the people at risk. Till date, not a lot of attention has been paid to technologically advanced evacuations intended for LNG terminals. Creating the technologically advanced evacuation influences directly on the decrease of the probability of fatalities P{sub f,i}, thus influencing the calculation of the individual risk as well as the societal risk which results in the positioning of the F-N curve in the acceptable part of the ALARP zone. With this paper, we aim to present the difference between the safety analyses in cases when conservative data for P{sub f,i} is being used while calculating the risk, and in cases when real data for P{sub f,i} is been used. (Author)

A naturalistic study of the directional interpretation process of discrete emotions during high-stakes table tennis matches.

Science.gov (United States)

Martinent, Guillaume; Ferrand, Claude

2009-06-01

The purpose of this study was to explore the directional interpretation process of discrete emotions experienced by table tennis players during competitive matches by adopting a naturalistic qualitative video-assisted approach. Thirty self-confrontation interviews were conducted with 11 national table tennis players (2 or 3 matches per participants). Nine discrete emotions were identified through the inductive analyses of the participants' transcriptions: anger, anxiety, discouragement, disappointment, disgust, joy, serenity, relief, and hope. Inductive analyses revealed the emergence of 4 categories and 13 themes among the 9 discrete emotions: positive direction (increased concentration, increased motivation, increased confidence, positive sensations, and adaptive behaviors), negative direction (decreased concentration, decreased motivation, too confident, decreased confidence, negative sensations, and maladaptive behaviors), neutral direction (take more risk and take less risk), and no perceived influence on own performance. Results are discussed in terms of current research on directional interpretation and emotions in sport.

Japanese contributions to IAEA INTOR Workshop, Phase Two A, Part 3

International Nuclear Information System (INIS)

Mori, Shigeru; Tomabechi, Ken; Fujisawa, Noboru

1988-02-01

This report corresponds to Chapter I and II of Japanese contribution report to IAEA INTOR Workshop, Phase Two A, Part 3. The major objectives of the INTOR Workshop Part 3 are to evaluate innovative ideas which would significantly improve the tokamak concept, to study new-selected critical technical issues, that affect the feasibility or practicability of the INTOR concept, to assess scientific and technical data bases, and to conduct critical analyses of the existing INTOR-like designs with the aim of preparing a useful information base for future design work for ITER. To perform the innovations, critical issues, and data base, the following six groups are organized; (A) Impurity control, (B) Operational limits and confinement, (C) Current drive and heating, (D) Electromagnetics, (E) Configuration and maintenance, (F) Blanket and first wall. In addition to those groups, the two disciplinary groups are also organized to do the critical analyses of the existing INTOR-like designs; (G) Physics and (H) Engineering. (author)

Prosocial Motivation, Stress and Burnout among Direct Support Workers