WorldWideScience

Sample records for diffractive optical element

  1. Diffractive Optical Elements for Dynamic Optical Coupling

    Institute of Scientific and Technical Information of China (English)

    Changhe Zhou; Xin Zhao; Liren Liu

    2003-01-01

    Diffractive optical elements such as the complementary Dammann gratings are incorporated for dynamic optical fiber splitting and combining. Experimental results of 1′8 dynamic optical couplings are presented.

  2. Diffractive Optical Elements for Dynamic Optical Coupling

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Diffractive optical elements such as the complementary Dammann gratings are incorporated for dynamic optical fiber splitting and combining. Experimental results of 1×8 dynamic optical couplings are presented.

  3. Diffractive optical elements written by photodeposition

    Science.gov (United States)

    Baal-Zedaka, I.; Hava, S.; Mirchin, N.; Margolin, R.; Zagon, M.; Lapsker, I.; Azoulay, J.; Peled, A.

    2003-03-01

    In this work direct laser writing of diffractive optical elements (DOE) by photodeposition (PD) of amorphous selenium (a-Se) from colloid solutions has been investigated. We used a computer controlled laser scanner for patterning thin film micro-profiles creating thus planar optical elements by direct beam writing on surfaces immersed in a liquid phase PD cell. The laser employed was an argon ion laser at 488 nm wavelength, with powers up to 55 mW, for writing typically 25-250 μm wide lines of 200 nm thickness at rates of about 150 μm/s. Various elements made of photodeposited thin films on polymethyl-methacrylate (PMMA) substrates were produced for prototyping microlenses, linear grating arrays, cylindrical and circular profiled DOE patterns.

  4. Diffractive optical elements written by photodeposition

    Energy Technology Data Exchange (ETDEWEB)

    Baal-Zedaka, I.; Hava, S.; Mirchin, N.; Margolin, R.; Zagon, M.; Lapsker, I.; Azoulay, J.; Peled, A

    2003-03-15

    In this work direct laser writing of diffractive optical elements (DOE) by photodeposition (PD) of amorphous selenium (a-Se) from colloid solutions has been investigated. We used a computer controlled laser scanner for patterning thin film micro-profiles creating thus planar optical elements by direct beam writing on surfaces immersed in a liquid phase PD cell. The laser employed was an argon ion laser at 488 nm wavelength, with powers up to 55 mW, for writing typically 25-250 {mu}m wide lines of 200 nm thickness at rates of about 150 {mu}m/s. Various elements made of photodeposited thin films on polymethyl-methacrylate (PMMA) substrates were produced for prototyping microlenses, linear grating arrays, cylindrical and circular profiled DOE patterns.

  5. Transmissive Diffractive Optical Element Solar Concentrators

    Science.gov (United States)

    Baron, Richard; Moynihan, Philip; Price, Douglas

    2008-01-01

    Solar-thermal-radiation concentrators in the form of transmissive diffractive optical elements (DOEs) have been proposed as alternatives to mirror-type solar concentrators now in use. In comparison with functionally equivalent mirror-type solar concentrators, the transmissive, diffractive solar concentrators would weigh and cost less, and would be subject to relaxed mechanical tolerances. A DOE concentrator would be made from a thin, flat disk or membrane of a transmissive material having a suitable index of refraction. By virtue of its thinness, the DOE concentrator would have an areal mass density significantly less than that of a functionally equivalent conventional mirror. The DOE concentrator would have a relatively wide aperture--characterized by a focal-length/aperture-diameter ratio ('f number') on the order of 1. A kinoform (a surface-relief phase hologram) of high diffractive order would be microfabricated onto one face of the disk. The kinoform (see figure) would be designed to both diffract and refract incident solar radiation onto a desired focal region, without concern for forming an image of the Sun. The high diffractive order of this kinoform (in contradistinction to the low diffractive orders of some other kinoforms) would be necessary to obtain the desired f number of 1, which, in turn, would be necessary for obtaining a desired concentration ratio of 2,500 or greater. The design process of optimizing the concentration ratio of a proposed DOE solar concentrator includes computing convolutions of the optical bandwidth of the Sun with the optical transmission of the diffractive medium. Because, as in the cases of other non-imaging, light-concentrating optics, image quality is not a design requirement, the process also includes trading image quality against concentration ratio. A baseline design for one example calls for an aperture diameter of 1 m. This baseline design would be scalable to a diameter as large as 10 m, or to a smaller diameter for a

  6. Virtual input device with diffractive optical element

    Science.gov (United States)

    Wu, Ching Chin; Chu, Chang Sheng

    2005-02-01

    As a portable device, such as PDA and cell phone, a small size build in virtual input device is more convenient for complex input demand. A few years ago, a creative idea called 'virtual keyboard' is announced, but up to now there's still no mass production method for this idea. In this paper we'll show the whole procedure of making a virtual keyboard. First of all is the HOE (Holographic Optical Element) design of keyboard image which yields a fan angle about 30 degrees, and then use the electron forming method to copy this pattern in high precision. And finally we can product this element by inject molding. With an adaptive lens design we can get a well correct keyboard image in distortion and a wilder fan angle about 70 degrees. With a batter alignment of HOE pattern lithography, we"re sure to get higher diffraction efficiency.

  7. Application of an approximate vectorial diffraction model to analysing diffractive micro-optical elements

    Institute of Scientific and Technical Information of China (English)

    Niu Chun-Hui; Li Zhi-Yuan; Ye Jia-Sheng; Gu Ben-Yuan

    2005-01-01

    Scalar diffraction theory, although simple and efficient, is too rough for analysing diffractive micro-optical elements.Rigorous vectorial diffraction theory requires extensive numerical efforts, and is not a convenient design tool. In this paper we employ a simple approximate vectorial diffraction model which combines the principle of the scalar diffraction theory with an approximate local field model to analyse the diffraction of optical waves by some typical two-dimensional diffractive micro-optical elements. The TE and TM polarization modes are both considered. We have found that the approximate vectorial diffraction model can agree much better with the rigorous electromagnetic simulation results than the scalar diffraction theory for these micro-optical elements.

  8. Diffractive optical elements for transformation of modes in lasers

    Energy Technology Data Exchange (ETDEWEB)

    Sridharan, Arun K; Pax, Paul H; Heebner, John E; Drachenberg, Derrek R.; Armstrong, James P.; Dawson, Jay W.

    2016-06-21

    Spatial mode conversion modules are described, with the capability of efficiently transforming a given optical beam profile, at one plane in space into another well-defined optical beam profile at a different plane in space, whose detailed spatial features and symmetry properties can, in general, differ significantly. The modules are comprised of passive, high-efficiency, low-loss diffractive optical elements, combined with Fourier transform optics. Design rules are described that employ phase retrieval techniques and associated algorithms to determine the necessary profiles of the diffractive optical components. System augmentations are described that utilize real-time adaptive optical techniques for enhanced performance as well as power scaling.

  9. Photodeposited diffractive optical elements of computer generated masks

    Energy Technology Data Exchange (ETDEWEB)

    Mirchin, N. [Electrical and Electronics Engineering Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel)]. E-mail: mirchin@hait.ac.il; Peled, A. [Electrical and Electronics Engineering Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel); Baal-Zedaka, I. [Electrical and Electronics Engineering Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel); Margolin, R. [Electrical and Electronics Engineering Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel); Zagon, M. [Electrical and Electronics Engineering Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel); Lapsker, I. [Physics Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel); Verdyan, A. [Physics Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel); Azoulay, J. [Physics Department, Holon Academic Institute of Technology, 52 Golomb Street, Holon 58102 (Israel)

    2005-07-30

    Diffractive optical elements (DOE) were synthesized on plastic substrates using the photodeposition (PD) technique by depositing amorphous selenium (a-Se) films with argon lasers and UV spectra light. The thin films were deposited typically onto polymethylmethacrylate (PMMA) substrates at room temperature. Scanned beam and contact mask modes were employed using computer-designed DOE lenses. Optical and electron micrographs characterize the surface details. The films were typically 200 nm thick.

  10. Photodeposited diffractive optical elements of computer generated masks

    Science.gov (United States)

    Mirchin, N.; Peled, A.; Baal-Zedaka, I.; Margolin, R.; Zagon, M.; Lapsker, I.; Verdyan, A.; Azoulay, J.

    2005-07-01

    Diffractive optical elements (DOE) were synthesized on plastic substrates using the photodeposition (PD) technique by depositing amorphous selenium (a-Se) films with argon lasers and UV spectra light. The thin films were deposited typically onto polymethylmethacrylate (PMMA) substrates at room temperature. Scanned beam and contact mask modes were employed using computer-designed DOE lenses. Optical and electron micrographs characterize the surface details. The films were typically 200 nm thick.

  11. Traceability of high focal length cameras with diffractive optical elements

    Science.gov (United States)

    Lages Martins, L.; Silva Ribeiro, A.; Sousa, J. Alves e.

    2016-11-01

    This paper describes the use of diffractive optical elements (DOEs) for metrological traceable geometrical testing of high focal length cameras applied in the observation of large- scale structures. DOEs and related mathematical models are briefly explained. Laboratorial activities and results are described for the case of a high focal length camera used for longdistance displacement measurement of a long-span (2278 m) suspension bridge.

  12. ADVANTAGES OF DIFFRACTIVE OPTICAL ELEMENTS APPLICATION IN SIMPLE OPTICAL IMAGING SYSTEMS

    Directory of Open Access Journals (Sweden)

    N. D. Zoric

    2015-01-01

    Full Text Available The paper deals with the influence of diffractive optical elements on the optical aberrations. The correction of optical aberrations was investigated in the simple optical systems with one and two lenses (singlet and doublet. The advantages of diffractive optical elements are their ability to generate arbitrary complex wave fronts from a piece of optical material that is essentially flat. The optical systems consisting of the standard surfaces were designed and optimized by using the same starting points. Further, the diffractive and aspheric surfaces were introduced into the developed systems. The resulting hybrid systems were optimized. To compare the complicity of the development of narrow field systems and wide field optical systems, the optimization has been done separately for these two types of the instruments. The optical systems were designed by using special Optical Design Software. Тhe characteristics of designed diffractive surfaces were controlled in Software DIFSYS 2.30. Due to the application of diffractive optical elements the longitudinal chromatic aberration was 5 times reduced for the narrow field systems. The absolute value of Seidel coefficient related to the spherical aberration was reduced in the range of 0.03. Considering that diffractive optical elements have the known disadvantages, like possible parasitic diffraction orders and probable decrease of the transmission, we also developed and analyzed the optical systems with combined aspheric and diffractive surfaces. A combination of the aspheric and diffractive surfaces in the optical disk system of the disk reading lens, gave cutting down of the longitudinal color aberrations almost 15 times on-axis, comparing to the lens consisting of the aspherical and standard surfaces. All of the designed diffractive optical elements possess the parameters within the fabrication limits.

  13. Information virtual indicator with combination of diffractive optical elements

    Science.gov (United States)

    Grad, Y. A.; Drozdova, E. A.; Nayden, L. A.; Nikolaev, V. V.; Odinokov, S. B.; Solomashenko, A. B.

    2016-08-01

    A combination of diffractive optical elements for monochrome information virtual indicators is described. To reduce the spectral "blurring" of image in monochrome indicators with OLED-display or LCD-display with LED backlight the possibility of using the volume reflection hologram as a spectral filter is investigated. The theoretical and experimental results show that the volume reflection hologram can be used as part of a monochrome virtual indicator containing OLED-, LCOS- or LCD-display with LED-backlight and relief-phase gratings for output of radiation from substrate to reduce the spectral "blurring" of image.

  14. Investigation of diffractive optical element femtosecond laser machining

    Energy Technology Data Exchange (ETDEWEB)

    Chabrol, Grégoire R., E-mail: g.chabrol@ecam-strasbourg.eu [ECAM Strasbourg-Europe, Espace Européen de l’entreprise, 2, rue de Madrid – 67300 SCHILTIGHEIM, CS. 20013, 67012 Strasbourg CEDEX (France); Laboratoire des Sciences de l’Ingénieur, de l’Informatique et de l’Imagerie (ICube), UDS-CNRS, UMR 7357, 300 bld Sébastien Brant, CS 10413, 67412 Illkirch cedex (France); Ciceron, Adline [ECAM Strasbourg-Europe, Espace Européen de l’entreprise, 2, rue de Madrid – 67300 SCHILTIGHEIM, CS. 20013, 67012 Strasbourg CEDEX (France); Laboratoire des Sciences de l’Ingénieur, de l’Informatique et de l’Imagerie (ICube), UDS-CNRS, UMR 7357, 300 bld Sébastien Brant, CS 10413, 67412 Illkirch cedex (France); Twardowski, Patrice; Pfeiffer, Pierre [Laboratoire des Sciences de l’Ingénieur, de l’Informatique et de l’Imagerie (ICube), UDS-CNRS, UMR 7357, 300 bld Sébastien Brant, CS 10413, 67412 Illkirch cedex (France); Télécom Physique Strasbourg – Pôle API – 300 Bd Sébastien Brant – CS 10413, Illkirch Graffenstaden F 67400 (France); and others

    2016-06-30

    Highlights: • A method for rapid manufacturing of optical diffractive element in BK7 is proposed. • A binary grating in BK7 was successfully machined by femtosecond laser pulses. • Process relying on nonlinear absorption in the dielectric due to photoionization. • The binary grating was analysed by SEM and interferometric microscopy. • Simulations by Fourier modal method supported the measured diffractive efficiency. - Abstract: This paper presents an explorative study on the machining of diffractive optical elements (DOEs) in transparent materials using a femtosecond laser source. A simple form of DOE, a binary phase grating with a period of 20.85 μm (σ = 0.5 μm), a groove depth and width of 0.7 μm (σ = 0.2 μm) and 8.8 μm (σ = 0.5 μm) respectively, was successfully machined in BK7. The topographic characteristics were measured by white light interferometry and scanning electron microscopy (SEM). The processing was carried out on high precision stages with an ultrafast fibre laser (350 fs) emitting a 343 nm pulse focused onto the sample with a stationary microscope objective. A diffracted efficiency of 27%, obtained with a spectro goniometer, was corroborated by the theoretical results obtained by the Fourier modal method (FMM), taking into account the measured topographic values. These encouraging results demonstrate that high-speed femtosecond laser manufacturing of DOE in bulk glasses can be achieved, opening the way to rapid prototyping of multi-layered-DOEs.

  15. Computer simulation of diffractive optical element (DOE) performance

    Science.gov (United States)

    Delacour, Jacques F.; Venturino, Jean-Claude; Gouedard, Yannick

    2004-02-01

    Diffractive optical elements (DOE), also known as computer generated holograms (CGH), can transform an illuminating laser beam into a specified intensity distribution by diffraction rather than refraction or reflection. These are widely used in coherent light systems with beam shaping purposes, as an alignment tool or as a structured light generator. The diffractive surface is split into an array of sub-wavelength depth cells. Each of these locally transforms the beam by phase adaptation. Based on the work of the LSP lab from the University of Strasbourg, France, we have developed a unique industry-oriented tool. It allows the user first to optimize a DOE using the Gerchberg-Saxton algorithm. This part can manage sources from the simple plane wave to high order Gaussian modes or complex maps defined beams and objective patterns based on BMP images. A simulation part permits then to test the performance of the DOE with regard to system parameters, dealing with the beam, the DOE itself and the system organization. This will meet the needs of people concerned by tolerancing issues. Focusing on the industrial problem of beam shaping, we will present the whole DOE design sequence, starting from the generation of a DOE up to the study of the sensitivity of its performance according to the variation of several parameters of the system. For example, we will show the influence of the position of the beam on diffraction efficiency. This unique feature formerly neglected in industrial design process will lead the way to production quality improvement.

  16. Fast character projection electron beam lithography for diffractive optical elements

    Science.gov (United States)

    Harzendorf, Torsten; Fuchs, Frank; Banasch, Michael; Zeitner, Uwe D.

    2014-05-01

    Electron beam lithography becomes attractive also for the fabrication of large scale diffractive optical elements by the use of the character projection (CP) technique. Even in the comparable fast variable shaped beam (VSB) exposure approach for conventional electron beam writers optical nanostructures may require very long writing times exceeding 24 hours per wafer because of the high density of features, as required by e.g. sub-wavelength nanostructures. Using character projection, the writing time can be reduced by more than one order of magnitude, due to the simultaneous exposure of multiple features. The benefit of character projection increases with increasing complexity of the features and decreasing period. In this contribution we demonstrate the CP technique for a grating of hexagonal symmetry at 350nm period. The pattern is designed to provide antireflective (AR) properties, which can be adapted in their spectral and angular domain for applications from VIS to NIR by changing the feature size and the etching depth of the nanostructure. This AR nanostructure can be used on the backside of optical elements e.g. gratings, when an AR coating stack could not be applied for the reason of climatic conditions or wave front accuracy.

  17. Precision glass molding of high-resolution diffractive optical elements

    Science.gov (United States)

    Prater, Karin; Dukwen, Julia; Scharf, Toralf; Herzig, Hans P.; Plöger, Sven; Hermerschmidt, Andreas

    2016-04-01

    The demand of high resolution diffractive optical elements (DOE) is growing. Smaller critical dimensions allow higher deflection angles and can fulfill more demanding requirements, which can only be met by using electron-beam lithography. Replication techniques are more economical, since the high cost of the master can be distributed among a larger number of replicas. The lack of a suitable mold material for precision glass molding has so far prevented an industrial use. Glassy Carbon (GC) offers a high mechanical strength and high thermal strength. No anti-adhesion coatings are required in molding processes. This is clearly an advantage for high resolution, high aspect ratio microstructures, where a coating with a thickness between 10 nm and 200 nm would cause a noticeable rounding of the features. Electron-beam lithography was used to fabricate GC molds with highest precision and feature sizes from 250 nm to 2 μm. The master stamps were used for precision glass molding of a low Tg glass L-BAL42 from OHARA. The profile of the replicated glass is compared to the mold with the help of SEM images. This allows discussion of the max. aspect-ratio and min. feature size. To characterize optical performances, beamsplitting elements are fabricated and their characteristics were investigated, which are in excellent agreement to theory.

  18. FABRICATION OF TRANSMISSIVE DIFFRACTIVE OPTICAL ELEMENTS FOR THE MID-INFRARED WITH A LASER WRITING INSTRUMENT

    Directory of Open Access Journals (Sweden)

    S. Calixto

    2007-08-01

    Full Text Available A simple method to fabricate infrared (λ = 10.6 μm diffractive optical elements that work in a transmissionmode is presented. A laser-writing instrument completely under computer control has been built todemonstrate the feasibility of this method. Several diffractive elements, fabricated using the laser-writinginstrument, are described.

  19. Microlithography application for production of multilevel diffractive optical elements (as a security hologram feature)

    Science.gov (United States)

    Braginets, Eugene; Kurashov, V.; Honcharuk, S.; Girnyk, V.; Kostyukevych, S.; Kostyukevych, K.

    2011-02-01

    The goal of a present research is to develop a method for production of multilevel Diffractive Optical Elements (DOEs) for use in Digital Security Holograms, using the direct-writing maskless lithography system.

  20. Tunable Diffractive Optical Elements Based on Shape-Memory Polymers Fabricated via Hot Embossing.

    Science.gov (United States)

    Schauer, Senta; Meier, Tobias; Reinhard, Maximilian; Röhrig, Michael; Schneider, Marc; Heilig, Markus; Kolew, Alexander; Worgull, Matthias; Hölscher, Hendrik

    2016-04-13

    We introduce actively tunable diffractive optical elements fabricated from shape-memory polymers (SMPs). By utilizing the shape-memory effect of the polymer, at least one crucial attribute of the diffractive optical element (DOE) is tunable and adjustable subsequent to the completed fabrication process. A thermoplastic, transparent, thermoresponsive polyurethane SMP was structured with diverse diffractive microstructures via hot embossing. The tunability was enabled by programming a second, temporary shape into the diffractive optical element by mechanical deformation, either by stretching or a second embossing cycle at low temperatures. Upon exposure to the stimulus heat, the structures change continuously and controllable in a predefined way. We establish the novel concept of shape-memory diffractive optical elements by illustrating their capabilities, with regard to tunability, by displaying the morphing diffractive pattern of a height tunable and a period tunable structure, respectively. A sample where an arbitrary structure is transformed to a second, disparate one is illustrated as well. To prove the applicability of our tunable shape-memory diffractive optical elements, we verified their long-term stability and demonstrated the precise adjustability with a detailed analysis of the recovery dynamics, in terms of temperature dependence and spatially resolved, time-dependent recovery.

  1. Analysis of offset error for segmented micro-structure optical element based on optical diffraction theory

    Science.gov (United States)

    Su, Jinyan; Wu, Shibin; Yang, Wei; Wang, Lihua

    2016-10-01

    Micro-structure optical elements are gradually applied in modern optical system due to their characters such as light weight, replicating easily, high diffraction efficiency and many design variables. Fresnel lens is a typical micro-structure optical element. So in this paper we take Fresnel lens as base of research. Analytic solution to the Point Spread Function (PSF) of the segmented Fresnel lens is derived based on the theory of optical diffraction, and the mathematical simulation model is established. Then we take segmented Fresnel lens with 5 pieces of sub-mirror as an example. In order to analyze the influence of different offset errors on the system's far-field image quality, we obtain the analytic solution to PSF of the system under the condition of different offset errors by using Fourier-transform. The result shows the translation error along XYZ axis and tilt error around XY axis will introduce phase errors which affect the imaging quality of system. The translation errors along XYZ axis constitute linear relationship with corresponding phase errors and the tilt errors around XY axis constitute trigonometric function relationship with corresponding phase errors. In addition, the standard deviations of translation errors along XY axis constitute quadratic nonlinear relationship with system's Strehl ratio. Finally, the tolerances of different offset errors are obtained according to Strehl Criteria.

  2. Optical schemes for speckle suppression by Barker code diffractive optical elements.

    Science.gov (United States)

    Lapchuk, A; Kryuchyn, A; Petrov, V; Shyhovets, O V; Pashkevich, G A; Bogdan, O V; Kononov, A; Klymenko, A

    2013-09-01

    A method for speckle suppression based on Barker code and M-sequence code diffractive optical elements (DOEs) is analyzed. An analytical formula for the dependence of speckle contrast on the wavelength of the laser illumination is derived. It is shown that speckle contrast has a wide maximum around the optimal wavelength that makes it possible to obtain large speckle suppression by using only one DOE for red, green, and blue laser illumination. Optical schemes for implementing this method are analyzed. It is shown that the method can use a simple liquid-crystal panel for phase rotation instead of a moving DOE; however, this approach requires a high frequency of liquid-crystal switching. A simple optical scheme is proposed using a 1D Barker code DOE and a simple 1D liquid-crystal panel, which does not require a high frequency of liquid-crystal switching or high-accuracy DOE movement.

  3. Research on the Design of an Optical Information Storage Sensing System Using a Diffractive Optical Element

    Directory of Open Access Journals (Sweden)

    Min Gu

    2013-11-01

    Full Text Available This paper introduces a compact optical information storage sensing system. Applications of this system include longitudinal surface plasmon resonance detection of gold nanorods with a single femtosecond laser in three-dimensional space as well as data storage. A diffractive optical element (DOE is applied in the system to separate the recording-reading beam from the servo beam. This allows us to apply a single laser and one objective lens in a single optical path for the servo beam and the recording-reading beam. The optical system has a linear region of 8 λ, which is compatible with current DVD servo modules. The wavefront error of the optical system is below 0.03 λrms. The minimum grating period of the DOE is 13.4 µm, and the depth of the DOE is 1.2 µm, which makes fabrication of it possible. The DOE is also designed to conveniently control the layer-selection process, as there is a linear correlation between the displacement of the DOE and the layer-selection distance. The displacement of DOE is in the range of 0–6.045 mm when the thickness of the layer-selection is 0.3 mm. Experiments were performed and the results have been verified.

  4. Chromatic error correction of diffractive optical elements at minimum etch depths

    Science.gov (United States)

    Barth, Jochen; Gühne, Tobias

    2014-09-01

    The integration of diffractive optical elements (DOE) into an optical design opens up new possibilities for applications in sensing and illumination. If the resulting optics is used in a larger spectral range we must correct not only the chromatic error of the conventional, refractive, part of the design but also of the DOE. We present a simple but effective strategy to select substrates which allow the minimum etch depths for the DOEs. The selection depends on both the refractive index and the dispersion.

  5. Fabrication of Diffractive Optical Elements for an Integrated Compact Optical-MEMS Laser Scanner

    Energy Technology Data Exchange (ETDEWEB)

    WENDT,JOEL R.; KRYGOWSKI,T.W.; VAWTER,GREGORY A.; SPAHN,OLGA B.; SWEATT,WILLIAM C.; WARREN,MIAL E.; REYES,DAVID NMN

    2000-07-13

    The authors describe the microfabrication of a multi-level diffractive optical element (DOE) onto a micro-electromechanical system (MEMS) as a key element in an integrated compact optical-MEMS laser scanner. The DOE is a four-level off-axis microlens fabricated onto a movable polysilicon shuttle. The microlens is patterned by electron beam lithography and etched by reactive ion beam etching. The DOE was fabricated on two generations of MEMS components. The first generation design uses a shuttle suspended on springs and displaced by a linear rack. The second generation design uses a shuttle guided by roller bearings and driven by a single reciprocating gear. Both the linear rack and the reciprocating gear are driven by a microengine assembly. The compact design is based on mounting the MEMS module and a vertical cavity surface emitting laser (VCSEL) onto a fused silica substrate that contains the rest of the optical system. The estimated scan range of the system is {+-}4{degree} with a spot size of 0.5 mm.

  6. Challenges in mold manufacturing for high precision molded diffractive optical elements

    Science.gov (United States)

    Pongs, Guido; Bresseler, Bernd; Schweizer, Klaus; Bergs, Thomas

    2016-09-01

    Isothermal precision glass molding of imaging optics is the key technology for mass production of precise optical elements. Especially for numerous consumer applications (e.g. digital cameras, smart phones, …), high precision glass molding is applied for the manufacturing of aspherical lenses. The usage of diffractive optical elements (DOEs) can help to further reduce the number of lenses in the optical systems which will lead to a reduced weight of hand-held optical devices. But today the application of molded glass DOEs is limited due to the technological challenges in structuring the mold surfaces. Depending on the application submicrometer structures are required on the mold surface. Furthermore these structures have to be replicated very precisely to the glass lens surface. Especially the micro structuring of hard and brittle mold materials such as Tungsten Carbide is very difficult and not established. Thus a multitude of innovative approaches using diffractive optical elements cannot be realized. Aixtooling has investigated in different mold materials and different suitable machining technologies for the micro- and sub-micrometer structuring of mold surfaces. The focus of the work lays on ultra-precision grinding to generate the diffractive pattern on the mold surfaces. This paper presents the latest achievements in diffractive structuring of Tungsten Carbide mold surfaces by ultra-precision grinding.

  7. A single diffractive optical element implementing spectrum-splitting and beam-concentration functions simultaneously with high diffraction efficiency

    Institute of Scientific and Technical Information of China (English)

    Ye Jia-Sheng; Wang Jin-Ze; Huang Qing-Li; Dong Bi-Zhen; Zhang Yan; Yang Guo-Zhen

    2013-01-01

    In this paper,a novel method is proposed and employed to design a single diffractive optical element (DOE) for implementing spectrum-splitting and beam-concentration (SSBC) functions simultaneously.We develop an optimization algorithm,through which the SSBC DOE can be optimized within an arbitrary thickness range according to the limitations of modem photolithography technology.Theoretical simulation results reveal that the designed SSBC DOE has a high optical focusing efficiency.It is expected that the designed SSBC DOE should have practical applications in high-efficiency solar cell systems.

  8. A single diffractive optical element for implementing spectrum-splitting and beam-concentration functions simultaneously with high diffraction efficiency

    CERN Document Server

    Ye, Jia-Sheng; Huang, Qing-Li; Dong, Bi-Zhen; Zhang, Yan; Yang, Guo-Zhen

    2013-01-01

    In this paper, a novel method is proposed, and employed to design a single diffractive optical element (DOE) for implementing spectrum-splitting and beam-concentration (SSBC) functions simultaneously. We develop an optimization algorithm, through which the SSBC DOE can be optimized within an arbitrary thickness range, according to the limitations of modern photolithography technology. Theoretical simulation results reveal that the designed SSBC DOE has a high optical focusing efficiency. It is expected that the designed SSBC DOE should have practical applications in high-efficiency solar cell systems.

  9. Design and verification of diffractive optical elements for speckle generation of 3-D range sensors

    Science.gov (United States)

    Du, Pei-Qin; Shih, Hsi-Fu; Chen, Jenq-Shyong; Wang, Yi-Shiang

    2016-09-01

    The optical projection using speckles is one of the structured light methods that have been applied to three-dimensional (3-D) range sensors. This paper investigates the design and fabrication of diffractive optical elements (DOEs) for generating the light field with uniformly distributed speckles. Based on the principles of computer generated holograms, the iterative Fourier transform algorithm was adopted for the DOE design. It was used to calculate the phase map for diffracting the incident laser beam into a goal pattern with distributed speckles. Four patterns were designed in the study. Their phase maps were first examined by a spatial light modulator and then fabricated on glass substrates by microfabrication processes. Finally, the diffraction characteristics of the fabricated devices were verified. The experimental results show that the proposed methods are applicable to the DOE design of 3-D range sensors. Furthermore, any expected diffraction area and speckle density could be possibly achieved according to the relations presented in the paper.

  10. Design and verification of diffractive optical elements for speckle generation of 3-D range sensors

    Science.gov (United States)

    Du, Pei-Qin; Shih, Hsi-Fu; Chen, Jenq-Shyong; Wang, Yi-Shiang

    2016-12-01

    The optical projection using speckles is one of the structured light methods that have been applied to three-dimensional (3-D) range sensors. This paper investigates the design and fabrication of diffractive optical elements (DOEs) for generating the light field with uniformly distributed speckles. Based on the principles of computer generated holograms, the iterative Fourier transform algorithm was adopted for the DOE design. It was used to calculate the phase map for diffracting the incident laser beam into a goal pattern with distributed speckles. Four patterns were designed in the study. Their phase maps were first examined by a spatial light modulator and then fabricated on glass substrates by microfabrication processes. Finally, the diffraction characteristics of the fabricated devices were verified. The experimental results show that the proposed methods are applicable to the DOE design of 3-D range sensors. Furthermore, any expected diffraction area and speckle density could be possibly achieved according to the relations presented in the paper.

  11. Design of a diffractive optical element for pattern formation in a bilingual virtual keyboard

    Science.gov (United States)

    Manouchehri, Sohrab; Rahimi, Mojtaba; Oboudiat, Mohammad

    2016-03-01

    Pattern formation is one of the many applications of diffractive optical elements (DOEs) for display. Since DOEs have lightweight and slim nature compared to other optical devices, using them as image projection device in virtual keyboards is suggested. In this paper, we present an approach to designing elements that produce distinct intensity patterns, in the far field, for two wavelengths. These two patterns are images of bilingual virtual keyboard. To achieve this with DOEs is not simple, as they are inherently wavelength specific. Our technique is based on phase periodic characteristic of wavefront using iterative algorithm to design the phase profiles.

  12. Ion-exchanged diffractive elements in glass for substrate-mode optics.

    Science.gov (United States)

    Salmio, R P; Saarinen, J; Noponen, E

    1998-08-01

    We recently demonstrated the use of continuous-phase ion-exchanged diffractive elements in glass for free-space optics. We extend our design methods to substrate-mode optics, which permits compact packing of miniature-sized free-space optical systems. We designed one-dimensional gratings for equal-intensity 1 ? 3 and 1 ? 5 beam splitting, assuming both planar and conical incidence angles. An experimental demonstration of a 1 ? 3 beam splitter with a uniformity error of 3.4% is presented.

  13. Study of an athermal infrared dual band optical system design containing harmonic diffractive element

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A harmonic diffractive element (HDE) is first successfully introduced to the athermal system of infrared dual band in this paper. In this system, there are only three lens and two materials, silicon and germanium. When the temperature ranges from -70℃ to 100℃ in the dual band, it can simultaneously accomplish the rectification of the longitudinal aberration in the big field of view, as well as the wave front aberration less than 1/4 wavelength. Modulation transfer function of dual band approaches or attains the diffraction limit. The calculation results show that the spectral properties of the HDE are between refractive and diffractive elements, so we can design a simple dual-band and athermal optical system by selecting the thickness and central wavelength of the HDE exactly. Compared with a conventional refractive optical system, this system not only reduces the demand for high technical levels, but also has a compact structure, few elements, a high transmittance better aberrations performances and athermal character. At the same time, the use of the HDE also offers a new element for the infrared optics design.

  14. Special diffractive elements for optical trapping fabricated on optical fiber tips using the focused ion beam

    Science.gov (United States)

    Rodrigues Ribeiro, R. S.; Guerreiro, A.; Viegas, J.; Jorge, P. A. S.

    2016-05-01

    In this work, spiral phase lenses and Fresnel zone lenses for beam tailoring, fabricated on the tip of optical fibers, are reported. The spiral phase lenses allow tailoring the fundamental guided mode, a Gaussian beam, into a Laguerre - Gaussian profile without using additional optical elements. Whereas, the Fresnel lenses are used as focusing systems. The lenses are fabricated using Focused Ion Beam milling, enabling high resolution in the manufacturing process. The output optical intensity profiles matching the numerical simulations are presented and analyzed.

  15. Fabrication of continuous diffractive optical elements using a fast tool servo diamond turning process

    Science.gov (United States)

    Zhou, Jingbo; Li, Lei; Naples, Neil; Sun, Tao; Yi, Allen Y.

    2013-07-01

    Continuous diffractive optical elements (CDOEs) can be used for laser-beam reshaping, pattern generation and can help reduce large angle scattering. Lithography, the method for the production of binary diffractive surfaces, is not suitable for fabrication of CDOEs. Diamond turning using fast tool servo, on the other hand, is a non-cleanroom method for generating continuous microstructures with high precision and efficiency. In this paper, an algorithm for designing CDOEs is introduced. The moving least-squares (MLS) method is then used to obtain the local fitting equation of the diffractive surface. Based on the MLS fitting equation, the selection of diamond cutting tool geometries (including the tool nose radius, rake angle and clearance angle) is discussed and a tool nose radius compensation algorithm is included. This algorithm is a general method for the diamond turning of complex surfaces that can be represented by a point cloud. Surface measurements and diffractive patterns generated on test samples have shown that continuous diffractive surfaces were successfully machined. In the future, CDOEs can be machined on an optical mold surface for high-volume industrial production using methods such as injection molding.

  16. Two-photon microscopy with diffractive optical elements and spatial light modulators

    Directory of Open Access Journals (Sweden)

    Brendon O Watson

    2010-09-01

    Full Text Available Two-photon microscopy is often performed at slow frame rates, due to the need to serially scan all points in a field of view with a single laser beam. To overcome this problem, we have developed two optical methods that split and multiplex a laser beam across the sample. In the first method a diffractive optical element (DOE generates a fixed number of beamlets that are scanned in parallel, resulting in a corresponding increase in speed, or in signal-to-noise ratio, in time-lapse measurements. The second method uses a computer-controlled spatial light modulator (SLM, to generate any arbitrary spatio-temporal light pattern. With an SLM one can image or photostimulate any predefined region of the image, such as neurons or dendritic spines. In addition, SLMs can be used to mimic a large number of optical transfer functions, including light path corrections or as adaptive optical devices.

  17. Focusing and imaging properties of diffractive optical elements with star-ring topological structure

    Science.gov (United States)

    Ke, Jie; Zhang, Junyong; Zhang, Yanli; Sun, Meizhi

    2015-08-01

    A kind of diffractive optical elements (DOE) with star-ring topological structure is proposed and their focusing and imaging properties are studied in detail. The so-called star-ring topological structure denotes that a large number of pinholes distributed in many specific zone orbits. In two dimensional plane, this structure can be constructed by two constrains, one is a mapping function, which yields total potential zone orbits, corresponding to the optical path difference (OPD); the other is a switching sequence based on the given encoded seed elements and recursion relation to operate the valid zone orbits. The focusing and imaging properties of DOE with star-ring topological structure are only determined by the aperiodic sequence, and not relevant to the concrete geometry structure. In this way, we can not only complete the traditional symmetrical DOE, such as circular Dammam grating, Fresnel zone plates, photon sieves, and their derivatives, but also construct asymmetrical elements with anisotropic diffraction pattern. Similarly, free-form surface or three dimensional DOE with star-ring topological structure can be constructed by the same method proposed. In consequence of smaller size, lighter weight, more flexible design, these elements may allow for some new applications in micro and nanphotonics.

  18. Modeling focusing characteristics of low Fnumber diffractive optical elements with continuous relief fabricated by laser direct writing.

    Science.gov (United States)

    Shan, Mingguang; Tan, Jiubin

    2007-12-10

    A theoretical model is established using Rayleigh-Sommerfeld diffraction theory to describe the diffraction focusing characteristics of low F-number diffractive optical elements with continuous relief fabricated by laser direct writing, and continuous-relief diffractive optical elements with a design wavelength of 441.6nm and a F-number of F/4 are fabricated and measured to verify the validity of the diffraction focusing model. The measurements made indicate that the spot size is 1.75mum and the diffraction efficiency is 70.7% at the design wavelength, which coincide well with the theoretical results: a spot size of 1.66mum and a diffraction efficiency of 71.2%.

  19. Approach to improve beam quality of inter-satellite optical communication system based on diffractive optical elements.

    Science.gov (United States)

    Tan, Liying; Yu, Jianjie; Ma, Jing; Yang, Yuqiang; Li, Mi; Jiang, Yijun; Liu, Jianfeng; Han, Qiqi

    2009-04-13

    For inter-satellite optical communication transmitter with reflective telescope of two-mirrors on axis, a large mount of the transmitted energy will be blocked by central obscuration of the secondary mirror. In this paper, a novel scheme based on diffractive optical element (DOE) is introduced to avoid it. This scheme includes one diffractive beam shaper and another diffractive phase corrector, which can diffract the obscured part of transmitted beam into the domain unobscured by the secondary mirror. The proposed approach is firstly researched with a fixed obscuration ratio of 1/4. Numerical simulation shows that the emission efficiency of new figuration is 99.99%; the beam divergence from the novel inter-satellite optical communication transmitter is unchanged; and the peak intensity of receiver plane is increased about 31% compared with the typical configuration. Then the intensy patterns of receiver plane are analyzed with various obscuration ratio, the corresponding numerical modelling reveals that the intensity patterns with various obscuration ratio are nearly identical, but the amplify of relative peak intensity is getting down with the growth of obscuration ratio. This work can improve the beam quality of inter-satellite optical communication system without affecting any other functionality.

  20. Iterative Fourier transform algorithm: different approaches to diffractive optical element design

    Science.gov (United States)

    Skeren, Marek; Richter, Ivan; Fiala, Pavel

    2002-10-01

    This contribution focuses on the study and comparison of different design approaches for designing phase-only diffractive optical elements (PDOEs) for different possible applications in laser beam shaping. Especially, new results and approaches, concerning the iterative Fourier transform algorithm, are analyzed, implemented, and compared. Namely, various approaches within the iterative Fourier transform algorithm (IFTA) are analyzed for the case of phase-only diffractive optical elements with quantizied phase levels (either binary or multilevel structures). First, the general scheme of the IFTA iterative approach with partial quantization is briefly presented and discussed. Then, the special assortment of the general IFTA scheme is given with respect to quantization constraint strategies. Based on such a special classification, the three practically interesting approaches are chosen, further-analyzed, and compared to eachother. The performance of these algorithms is compared in detail in terms of the signal-to-noise ratio characteristic developments with respect to the numberof iterations, for various input diffusive-type objects chose. Also, the performance is documented on the complex spectra developments for typical computer reconstruction results. The advantages and drawbacks of all approaches are discussed, and a brief guide on the choice of a particular approach for typical design tasks is given. Finally, the two ways of amplitude elimination within the design procedure are considered, namely the direct elimination and partial elimination of the amplitude of the complex hologram function.

  1. Reducing aberration effect of Fourier transform lens by modifying Fourier spectrum of diffractive optical element in beam shaping optical system.

    Science.gov (United States)

    Zhang, Fang; Zhu, Jing; Song, Qiang; Yue, Weirui; Liu, Jingdan; Wang, Jian; Situ, Guohai; Huang, Huijie

    2015-10-20

    In general, Fourier transform lenses are considered as ideal in the design algorithms of diffractive optical elements (DOEs). However, the inherent aberrations of a real Fourier transform lens disturb the far field pattern. The difference between the generated pattern and the expected design will impact the system performance. Therefore, a method for modifying the Fourier spectrum of DOEs without introducing other optical elements to reduce the aberration effect of the Fourier transform lens is proposed. By applying this method, beam shaping performance is improved markedly for the optical system with a real Fourier transform lens. The experiments carried out with a commercial Fourier transform lens give evidence for this method. The method is capable of reducing the system complexity as well as improving its performance.

  2. Three-dimensional shape measurement based on light patterns projection using diffractive optical elements

    Science.gov (United States)

    Twardowski, P.; Serio, B.; Raulot, V.; Guilhem, M.

    2010-05-01

    We propose a structured light micro-opto electromechanical system (MOEMS) projector specially designed to display successively a set of patterns in order to extract the 3-D shape of an object using a CCD cameras module and a small ARM-based computer for control, registration and numerical analysis. This method consists in a temporal codification using a modified Gray code combined with a classical phase shifting technique. Our approach is to combine the unambiguous and robust codification of the Gray code method with the high resolution of the phase shifting method to result in highly accurate 3D reconstructions. The proposed MOEMS is based on an array of vertical-cavity surface-emitting laser (VCSEL) combined with two planar static diffractive optical elements (DOEs) arrays. DOEs masters on quartz substrate have been fabricated using photolithography therefore replication in polycarbonate is possible at low cost. The first DOE array is designed to collimate the VCSEL light (Fresnel-type element) and the second one to project the codification patterns. DOEs have been designed and fabricated by surface etching to achieve a good diffraction efficiency using four phase levels. First we introduce the MEOMS principle and the features of the different components. We present the layout design of the DOEs and describe the issues related to the micro-fabrication process. An experimental study of the topography of the DOEs is presented and discussed. We then discuss fabrication aspects including the DOEs integration and packaging.

  3. Beam shaping for multicolour light-emitting diodes with diffractive optical elements

    KAUST Repository

    Yu, Chao

    2016-10-06

    An improved particle swarm optimization method is proposed for the design of ultra-thin diffractive optical elements (DOEs) enabling multicolour beam shaping functionality. We employ pre-optimized initial structures and adaptive weight strategy in the algorithm to achieve better and identical shaping performance for multiple colours. Accordingly, a DOE for shaping light from green and blue LEDs has been designed and fabricated. Both experiment and numerical simulations have been conducted and the results agree well with each other. 15.66% average root mean square error (RMSE) and 0.22% RMSE difference are achieved. In addition, the parameters closely related to the performance of the optimization are analysed, which can provide insights for future application designs.

  4. 3D laser inspection of fuel assembly grid spacers for nuclear reactors based on diffractive optical elements

    Science.gov (United States)

    Finogenov, L. V.; Lemeshko, Yu A.; Zav'yalov, P. S.; Chugui, Yu V.

    2007-06-01

    Ensuring the safety and high operation reliability of nuclear reactors takes 100% inspection of geometrical parameters of fuel assemblies, which include the grid spacers performed as a cellular structure with fuel elements. The required grid spacer geometry of assembly in the transverse and longitudinal cross sections is extremely important for maintaining the necessary heat regime. A universal method for 3D grid spacer inspection using a diffractive optical element (DOE), which generates as the structural illumination a multiple-ring pattern on the inner surface of a grid spacer cell, is investigated. Using some DOEs one can inspect the nomenclature of all produced grids. A special objective has been developed for forming the inner surface cell image. The problems of diffractive elements synthesis, projecting optics calculation, adjusting methods as well as calibration of the experimental measuring system are considered. The algorithms for image processing for different constructive elements of grids (cell, channel hole, outer grid spacer rim) and the experimental results are presented.

  5. Research on producing high quality diffractive optical elements in volume at a low cost

    Science.gov (United States)

    Daschner, Walter

    1997-11-01

    Diffractive Optical Elements (DOEs) can be utilized in a variety of possible applications in modern optical, as well as optoelectronic systems. The current roadblock for application of DOEs in consumer products is not the feasibility of the approach, as numerous applications have been successfully demonstrated. In order for the breakthrough to occur in industry, it is important to determine a convenient and cost-effective method for manufacturing DOEs. The industry will improve the design of their legacy systems and start including DOEs only when the performance improvement (which the utilization of DOEs achieves), can be purchased with a minimal amount of additional capital investment and cost-per-part. Therefore, the focus of this dissertation was to find a cost-effective method of fabricating large quantities of DOEs with currently available fabrication tools. Direct-write approaches were investigated to fabricate high-quality masters for a subsequent replication procedure based upon molding or casting. Electron-Beam Direct-Write was carried-out in a positive Novolac-based photo-resist which provides dry etch resistivity. Another focus of this development was to find a way to minimize Electron-Beam writing time for a given element. Proximity effect characterization and compensation has been carried-out in order to increase the fidelity of the pattern reproduction. A dry-etching procedure has been developed in order to transfer resist profiles into the substrate material. During this transfer step, the etch rates of resist and substrate material can be controlled; this in turn allows a choice of final feature depth in the substrate material (depending on refractive index and wavelength in use). Two Gray-Scale masking approaches were developed to allow the cost-effective mass fabrication of DOEs in a single optical exposure step. Thin film evaporation of Inconel achieves high-quality masks at a high price. High Energy Beam Sensitive Glass, the second mask material

  6. Comparative study of different Schlieren diffracting elements

    Indian Academy of Sciences (India)

    Raj Kumar; Sushil K Kaura; D P Chhachhia; D Mohan; A K Aggarwal

    2008-01-01

    This paper presents an analysis of diffraction effects taking place at different Schlieren diffracting elements. Two types of diffraction effects are prominent in the Schlieren schemes. One is diffraction of direct light (source image) at the Schlieren element, which limits the sensitivity and resolution of Schlieren systems. The second type is the diffraction of light deflected from the test object at the Schlieren-diffracting element. This second type of diffraction degrades the quality of Schlieren results. Experimental results showing the effect of diffraction of light deflected from the test object at a phase knife-edge, corner of a square phase aperture and an optical fiber tip as Schlieren diffracting elements have been presented and discussed.

  7. Diffraction coherence in optics

    CERN Document Server

    Françon, M; Green, L L

    2013-01-01

    Diffraction: Coherence in Optics presents a detailed account of the course on Fraunhofer diffraction phenomena, studied at the Faculty of Science in Paris. The publication first elaborates on Huygens' principle and diffraction phenomena for a monochromatic point source and diffraction by an aperture of simple form. Discussions focus on diffraction at infinity and at a finite distance, simplified expressions for the field, calculation of the path difference, diffraction by a rectangular aperture, narrow slit, and circular aperture, and distribution of luminous flux in the airy spot. The book th

  8. Comparison of two methods for equalising the diffraction efficiency of different spatial frequency components of holographic optical elements

    Science.gov (United States)

    Keshri, S.; Murphy, K.; Toal, V.; Naydenova, I.; Martin, S.

    2017-05-01

    A volume cylindrical holographic lens is fabricated in a photopolymer material to obtain a simple, lightweight and inexpensive lens which can collimate a diverging light beam. For a collimated beam, it is necessary to have uniform intensity across the beam diameter and to achieve equal diffraction efficiency for different regions of the cylindrical holographic lens, two methods are discussed. In the first method, the diffraction efficiency is improved by modifying the recording geometry in order to operate at a range of spatial frequencies for which the photopolymer provides higher diffraction efficiency. In the second method, the recording has been carried out with varying laser power and exposure time while keeping the exposure energy constant, in order to improve the material's performance at the lower spatial frequencies. The second approach increases the uniformity of diffraction efficiency across the Holographic optical elements (HOEs) even when low spatial frequency components are present. The results obtained provide cylindrical holographic lenses with overall higher and uniform diffraction efficiency. This type of lens has the potential to be used in combination with LED sources and different lighting applications.

  9. Performance of an optical encoder based on a nondiffractive beam implemented with a specific photodetection integrated circuit and a diffractive optical element.

    Science.gov (United States)

    Quintián, Fernando Perez; Calarco, Nicolás; Lutenberg, Ariel; Lipovetzky, José

    2015-09-01

    In this paper, we study the incremental signal produced by an optical encoder based on a nondiffractive beam (NDB). The NDB is generated by means of a diffractive optical element (DOE). The detection system is composed by an application specific integrated circuit (ASIC) sensor. The sensor consists of an array of eight concentric annular photodiodes, each one provided with a programmable gain amplifier. In this way, the system is able to synthesize a nonuniform detectivity. The contrast, amplitude, and harmonic content of the sinusoidal output signal are analyzed. The influence of the cross talk among the annular photodiodes is placed in evidence through the dependence of the signal contrast on the wavelength.

  10. Diffractive optical elements and quasioptical schemes for experiments on a high-power terahertz free-electron laser

    Science.gov (United States)

    Vinokurov, N. A.; Zhigach, S. A.; Knyazev, B. A.; Konysheva, A. V.; Kulipanov, G. N.; Merzhievsky, L. A.; Polskikh, I. A.; Cherkassky, V. S.

    2007-10-01

    We have developed reflective diffraction optical elements (DOE) for focusing monochromatic coherent radiation of 400 W terahertz Novosibirsk free-electron laser (FEL). Operational characteristics of two modifications of the refractive kinoform lenses were studied. Quasioptical Toepler system with terahertz radiation recording by a thermosensitive luminescent screen was fabricated for the examination of film and solid deformation. A system for real-time terahertz radioscopy of objects with image recording with a microbolometer matrix (MBM) was fabricated. Images of objects illuminated with a plane wave or diffuse radiation were studied with the MBM. It was shown that the speckle pattern, which appears in the second case, can be averaged by means of the scatterer rotation.

  11. Holographic X-ray optical elements: transition between refraction and diffraction

    CERN Document Server

    Snigireva, I; Rau, C; Weitkamp, T; Aristov, V; Grigoriev, M; Kuznetsov, S; Shabelnikov, L; Yunkin, V; Hoffmann, M; Voges, E

    2001-01-01

    Planar microelectronics technology, involving photolithography and highly anisotropic plasma etching techniques, was applied to fabricate refractive and diffractive (kinoform) lenses. Focusing properties in terms of focus spot and efficiency in the energy range 8-25 keV for both types of lenses were tested at the European Synchrotron Radiation Facility (ESRF) ID22 beamline. Focal spot of 1.5 mu m with a gain of 25 was measured at 15 keV.

  12. Diffractive optics and nanophotonics resolution below the diffraction limit

    CERN Document Server

    Minin, Igor

    2016-01-01

    In this book the authors present several examples of techniques used to overcome the Abby diffraction limit using flat and 3D diffractive optical elements, photonic crystal lenses, photonic jets, and surface plasmon diffractive optics. The structures discussed can be used in the microwave and THz range and also as scaled models for optical frequencies. Such nano-optical microlenses can be integrated, for example, into existing semiconductor heterostructure platforms for next-generation optoelectronic applications. Chapter 1 considers flat diffractive lenses and innovative 3D radiating structures including a conical millimeter-wave Fresnel zone plate (FZP) lens proposed for subwavelength focusing. In chapter 2 the subwavelength focusing properties of diffractive photonic crystal lenses are considered and it is shown that at least three different types of photonic crystal lens are possible.  With the aim of achieving subwavelength focusing, in chapter 3 an alternative mechanism to produce photonic jets at Tera...

  13. Laser Setup for Volume Diffractive Optical Elements Recording in Photo-Thermo-Refractive Glass

    Science.gov (United States)

    2016-04-14

    ADDRESS (ES) U.S. Army Research Office P.O. Box 12211 Research Triangle Park, NC 27709-2211 UV laser , third harmonic generation, hologram recording...of uniformity of VBGs across the aperture that is a key for large aperture pulse compressors used in high power ultrashort pulse lasers . ? A new...the College of Optics and Photonics, University of Central Florida. 4304 Scorpius Str. Orlando, FL 32816 6. Key words: UV laser , third harmonic

  14. Achromatic digital speckle pattern interferometer with constant radial in-plane sensitivity by using a diffractive optical element

    Energy Technology Data Exchange (ETDEWEB)

    Viotti, Matias R.; Kapp, Walter; Armando Albertazzi, G. Jr.

    2009-04-20

    We report on a digital speckle pattern interferometer that applies a binary diffractive optical element (DOE) to generate double illumination and radial in-plane sensitivity. The application of the DOE ensures independence on the wavelength of the laser used as an illumination source. Furthermore, in-plane sensitivity only depends on the grating period of the DOE. An experimental setup was built allowing the measurement of a set of radial in-plane displacement fields either using a red laser as a light source or a green one. When displacement fields computed from the measured optical phase maps obtained with a red or a green laser were compared, two main results were observed: (a) deviations between mean values ranged only up to 7 nm and (b) phase maps presented the same amount of fringes. In addition, phase maps measured with the red laser were processed as they were obtained with green light. For this case, deviations have ranged only up to 0.5 nm. On the other hand, a set of measurements performed changing the DOE by a conical mirror showed clearly that radial in-plane sensitivity increased when the red laser was changed by the green one.

  15. Field Guide to Diffractive Optics

    CERN Document Server

    Soskind, Yakov

    2011-01-01

    This SPIE Field Guide provides the operational principles and established terminology of diffractive optics as well as a comprehensive overview of the main types of diffractive optics components. An emphasis is placed on the qualitative explanation of the diffraction phenomenon by the use of field distributions and graphs, providing the basis for understanding the fundamental relations and important trends.

  16. Performance evaluation of a radial in-plane digital speckle pattern interferometer using a diffractive optical element for residual stress measurement

    Science.gov (United States)

    Albertazzi, A., Jr.; Viotti, M. R.; Kapp, W. A.

    2010-08-01

    A digital speckle pattern (DSP) interferometer using a special diffractive optical element (DOE) was developed by the authors. A collimated laser beam is diffracted by the DOE in such a way that the first diffraction orders produce a circular double illuminated measurement area. Due to natural symmetry of the illumination scheme, the interferometer reaches pure radial in-plane sensitivity. It is demonstrated and verified that the resulting interferometer is not sensitive to laser wavelength variations at all. Its configuration is presented as well as its performance evaluation for residual stress measurements using the blind hole-drilling method.

  17. Diffractive super-resolution elements applied to near-field optical data storage with solid immersion lens

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Yaoju [Department of Physics, Wenzhou Normal College, Wenzhou 325027 (China); Xiao Huaceng [Department of Biology, Wenzhou Normal College, Wenzhou 325027 (China); Zheng Chongwei [Department of Physics, Wenzhou Normal College, Wenzhou 325027 (China)

    2004-07-01

    The intensity distribution in near-field optical data storage with a solid immersion lens (SIL) and a binary phase-only diffractive super-resolution element (DSE) is expressed in a single definite integral by using angular spectrum theory. The super-resolution of binary two-zone phase DSEs for SIL systems is numerically studied for low and high numerical aperture (NA) systems. The results for the low-NA systems show that optimizing the zone boundary and phase of binary two-zone phase DSEs can decrease the spot size. The Strehl ratio, sidelobe intensity and axial characteristic length are also discussed. In addition, a binary two-zone phase filter can change the position of focus that shifts from the SIL-air interface to air, but the spot size increases. For the high-NA systems, the y- and z-polarized components of the transmitted field increase as the boundary and depth of phase of the DSE increase. When the phase boundary is smaller and the depth of phase depth is close to {pi}, super-resolving effect of DSE is more obvious but the intensity of sidelobes is larger for the high-NA system. In this way, it may be possible to improve both the resolution and focal depth of the SIL with high-NA systems.

  18. Diffractive elements performance in chromatic confocal microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Garzon, J; Duque, D; Alean, A; Toledo, M [Grupo de Optica y EspectroscopIa, Centro de Ciencia Basica, Universidad Pontificia Bolivariana. Medellin (Colombia); Meneses, J [Laboratorio de Optica y Tratamiento de Senales, Instituto de Fisica, Universidad Industrial de Santander, Bucaramanga (Colombia); Gharbi, T, E-mail: jgarzonr10@une.net.co [Laboratoire d' Optique P. M. Duffieux, UMR-6603 CNR/Universite de Franche-Comte. 16 route de Gray, 25030 Besancon Cedex (France)

    2011-01-01

    The Confocal Laser Scanning Microscopy (CLSM) has been widely used in the semiconductor industry and biomedicine because of its depth discrimination capability. Subsequent to this technique has been developed in recent years Chromatic Confocal Microscopy. This method retains the same principle of confocal and offers the added advantage of removing the axial movement of the moving system. This advantage is usually accomplished with an optical element that generates a longitudinal chromatic aberration and a coding system that relates the axial position of each point of the sample with the wavelength that is focused on each. The present paper shows the performance of compact chromatic confocal microscope when some different diffractive elements are used for generation of longitudinal chromatic aberration. Diffractive elements, according to the process and manufacturing parameters, may have different diffraction efficiency and focus a specific wavelength in a specific focal position. The performance assessment is carried out with various light sources which exhibit an incoherent behaviour and a broad spectral width.

  19. Three-dimensionally modulated anisotropic structure for diffractive optical elements created by one-step three-beam polarization holographic photoalignment

    Science.gov (United States)

    Kawai, Kotaro; Sakamoto, Moritsugu; Noda, Kohei; Sasaki, Tomoyuki; Kawatsuki, Nobuhiro; Ono, Hiroshi

    2016-03-01

    A diffractive optical element with a three-dimensional liquid crystal (LC) alignment structure for advanced control of polarized beams was fabricated by a highly efficient one-step photoalignment method. This study is of great significance because different two-dimensional continuous and complex alignment patterns can be produced on two alignment films by simultaneously irradiating an empty glass cell composed of two unaligned photocrosslinkable polymer LC films with three-beam polarized interference beam. The polarization azimuth, ellipticity, and rotation direction of the diffracted beams from the resultant LC grating widely varied depending on the two-dimensional diffracted position and the polarization states of the incident beams. These polarization diffraction properties are well explained by theoretical analysis based on Jones calculus.

  20. Three-dimensionally modulated anisotropic structure for diffractive optical elements created by one-step three-beam polarization holographic photoalignment

    Energy Technology Data Exchange (ETDEWEB)

    Kawai, Kotaro, E-mail: s135016@stn.nagaokaut.ac.jp; Sakamoto, Moritsugu; Noda, Kohei; Sasaki, Tomoyuki; Ono, Hiroshi [Department of Electrical Engineering, Nagaoka University of Technology, 1603-1 Kamitomioka, Nagaoka, Niigata 940-2188 (Japan); Kawatsuki, Nobuhiro [Department of Applied Chemistry, University of Hyogo, 2167 Shosha, Himeji, Hyogo 671-2280 (Japan)

    2016-03-28

    A diffractive optical element with a three-dimensional liquid crystal (LC) alignment structure for advanced control of polarized beams was fabricated by a highly efficient one-step photoalignment method. This study is of great significance because different two-dimensional continuous and complex alignment patterns can be produced on two alignment films by simultaneously irradiating an empty glass cell composed of two unaligned photocrosslinkable polymer LC films with three-beam polarized interference beam. The polarization azimuth, ellipticity, and rotation direction of the diffracted beams from the resultant LC grating widely varied depending on the two-dimensional diffracted position and the polarization states of the incident beams. These polarization diffraction properties are well explained by theoretical analysis based on Jones calculus.

  1. Sub-wavelength diffractive optics

    Energy Technology Data Exchange (ETDEWEB)

    Warren, M.E.; Wendt, J.R.; Vawter, G.A.

    1998-03-01

    This report represents the completion of a three-year Laboratory-Directed Research and Development (LDRD) program to investigate sub-wavelength surface relief structures fabricated by direct-write e-beam technology as unique and very high-efficiency optical elements. A semiconductor layer with sub-wavelength sized etched openings or features can be considered as a layer with an effective index of refraction determined by the fraction of the surface filled with semiconductor relative to the fraction filled with air or other material. Such as a layer can be used to implement planar gradient-index lenses on a surface. Additionally, the nanometer-scale surface structures have diffractive properties that allow the direct manipulation of polarization and altering of the reflective properties of surfaces. With this technology a single direct-write mask and etch can be used to integrate a wide variety of optical functions into a device surface with high efficiencies; allowing for example, direct integration of polarizing optics into the surface with high efficiencies; allowing for example, direct integration of polarizing optics into the surfaces of devices, forming anti-reflection surfaces or fabricating high-efficiency, high-numerical aperture lenses, including integration inside vertical semiconductor laser cavities.

  2. Study of optical Laue diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Chakravarthy, Giridhar, E-mail: cgiridhar84@gmail.com, E-mail: aloksharan@email.com; Allam, Srinivasa Rao, E-mail: cgiridhar84@gmail.com, E-mail: aloksharan@email.com; Satyanarayana, S. V. M., E-mail: cgiridhar84@gmail.com, E-mail: aloksharan@email.com; Sharan, Alok, E-mail: cgiridhar84@gmail.com, E-mail: aloksharan@email.com [Department of Physics, Pondicherry University, Puducherry-605014 (India)

    2014-10-15

    We present the study of the optical diffraction pattern of one and two-dimensional gratings with defects, designed using desktop pc and printed on OHP sheet using laser printer. Gratings so prepared, using novel low cost technique provides good visual aid in teaching. Diffraction pattern of the monochromatic light (632.8nm) from the grating so designed is similar to that of x-ray diffraction pattern of crystal lattice with point defects in one and two-dimensions. Here both optical and x-ray diffractions are Fraunhofer. The information about the crystalline lattice structure and the defect size can be known.

  3. Generation of Laguerre Gaussian beams using spiral phase diffractive elements fabricated on optical fiber tips using focused ion beam milling

    Science.gov (United States)

    Rodrigues Ribeiro, R. S.; Dahal, P.; Guerreiro, A.; Jorge, P. A. S.; Viegas, J.

    2016-03-01

    In this work, spiral phase lenses fabricated on the tip of single mode optical fibers are reported. This allows tailoring the fundamental guided mode, a Gaussian beam, into a Laguerre - Gaussian profile without using additional optical elements. The lenses are fabricated using Focused Ion Beam milling, enabling high resolution in the manufacturing process. The phase profiles are evaluated and validated using an implementation of the Finite Differences Time Domain. The output optical intensity profiles matching the numerical simulations are presented and analyzed. Finally, results on cell trapping and manipulation are briefly described.

  4. The diffractive achromat full spectrum computational imaging with diffractive optics

    KAUST Repository

    Peng, Yifan

    2016-07-11

    Diffractive optical elements (DOEs) have recently drawn great attention in computational imaging because they can drastically reduce the size and weight of imaging devices compared to their refractive counterparts. However, the inherent strong dispersion is a tremendous obstacle that limits the use of DOEs in full spectrum imaging, causing unacceptable loss of color fidelity in the images. In particular, metamerism introduces a data dependency in the image blur, which has been neglected in computational imaging methods so far. We introduce both a diffractive achromat based on computational optimization, as well as a corresponding algorithm for correction of residual aberrations. Using this approach, we demonstrate high fidelity color diffractive-only imaging over the full visible spectrum. In the optical design, the height profile of a diffractive lens is optimized to balance the focusing contributions of different wavelengths for a specific focal length. The spectral point spread functions (PSFs) become nearly identical to each other, creating approximately spectrally invariant blur kernels. This property guarantees good color preservation in the captured image and facilitates the correction of residual aberrations in our fast two-step deconvolution without additional color priors. We demonstrate our design of diffractive achromat on a 0.5mm ultrathin substrate by photolithography techniques. Experimental results show that our achromatic diffractive lens produces high color fidelity and better image quality in the full visible spectrum. © 2016 ACM.

  5. A pseudospectral collocation time-domain method for diffractive optics

    DEFF Research Database (Denmark)

    Dinesen, P.G.; Hesthaven, J.S.; Lynov, Jens-Peter

    2000-01-01

    We present a pseudospectral method for the analysis of diffractive optical elements. The method computes a direct time-domain solution of Maxwell's equations and is applied to solving wave propagation in 2D diffractive optical elements. (C) 2000 IMACS. Published by Elsevier Science B.V. All rights...

  6. DESIGNING A DIFFRACTIVE OPTICAL ELEMENT FOR CONTROLLING THE BEAM PROFILE IN A THREE-DIMENSIONAL SPACE USING THE SIMULATED ANNEALING ALGORITHM

    Institute of Scientific and Technical Information of China (English)

    LIANG WEN-XI; ZHANG JING-JUAN; L(U) JUN-FENG; LIAO RUI

    2001-01-01

    We have designed a spatially quantized diffractive optical element (DOE) for controlling the beam profile in a three-dimensional space with the help of the simulated annealing (SA) algorithm. In this paper, we investigate the annealing schedule and the neighbourhood which are the deterministic parameters of the process that warrant the quality of the SA algorithm. The algorithm is employed to solve the discrete stochastic optimization problem of the design of a DOE. The objective function which constrains the optimization is also studied. The computed results demonstrate that the procedure of the algorithm converges stably to an optimal solution close to the global optimum with an acceptable computing time. The results meet the design requirement well and are applicable.

  7. Encoded diffractive optics for full-spectrum computational imaging

    Science.gov (United States)

    Heide, Felix; Fu, Qiang; Peng, Yifan; Heidrich, Wolfgang

    2016-09-01

    Diffractive optical elements can be realized as ultra-thin plates that offer significantly reduced footprint and weight compared to refractive elements. However, such elements introduce severe chromatic aberrations and are not variable, unless used in combination with other elements in a larger, reconfigurable optical system. We introduce numerically optimized encoded phase masks in which different optical parameters such as focus or zoom can be accessed through changes in the mechanical alignment of a ultra-thin stack of two or more masks. Our encoded diffractive designs are combined with a new computational approach for self-calibrating imaging (blind deconvolution) that can restore high-quality images several orders of magnitude faster than the state of the art without pre-calibration of the optical system. This co-design of optics and computation enables tunable, full-spectrum imaging using thin diffractive optics.

  8. Encoded diffractive optics for full-spectrum computational imaging

    KAUST Repository

    Heide, Felix

    2016-09-16

    Diffractive optical elements can be realized as ultra-thin plates that offer significantly reduced footprint and weight compared to refractive elements. However, such elements introduce severe chromatic aberrations and are not variable, unless used in combination with other elements in a larger, reconfigurable optical system. We introduce numerically optimized encoded phase masks in which different optical parameters such as focus or zoom can be accessed through changes in the mechanical alignment of a ultra-thin stack of two or more masks. Our encoded diffractive designs are combined with a new computational approach for self-calibrating imaging (blind deconvolution) that can restore high-quality images several orders of magnitude faster than the state of the art without pre-calibration of the optical system. This co-design of optics and computation enables tunable, full-spectrum imaging using thin diffractive optics.

  9. Optical loss due to diffraction by concentrator Fresnel lenses

    Energy Technology Data Exchange (ETDEWEB)

    Hornung, Thorsten, E-mail: thorsten.hornung@ise.fraunhofer.de; Nitz, Peter, E-mail: thorsten.hornung@ise.fraunhofer.de [Fraunhofer Institute for Solar Energy Systems ISE, Heidenhofstr. 2, 79110 Freiburg (Germany)

    2014-09-26

    Fresnel lenses are widely used in concentrating photovoltaic (CPV) systems as a primary optical element. They focus sunlight on small solar cells or on the entrance apertures of secondary optical elements. A Fresnel lens consists of several prism rings and diffraction by these prism rings is unavoidable. Some of the light that would reach a designated target area according to geometric optics will miss it due to diffraction. This diffraction loss may be of relevant magnitude for CPV applications. The results of published analytical calculations are evaluated, discussed, and compared to computer simulations and measurements.

  10. Diffractive Optics: Design, Fabrication, and Applications, Technical Digest Series, Volume 9, 1992

    Science.gov (United States)

    1992-01-01

    Diffractive TuA, DIFFRACTIVE OPTICS FOR LASER SYSTEMS and refractive microlenses are combined to obtain improved Norbert Streibl, University Erlangen...wave linear diode-laser array into a two-dimensional distribution analysis of grating diffraction, Elias N. Glytsis, Thomas K. with symmetric...Diffractive optical elements in optoelectronics, Norbert Streibl, Physikalisches Institut, Germany. Diffractive components such as deflectors, lenses and

  11. Fabrication of NIL templates and diffractive optical elements using the new Vistec SB4050 VSB e-beam writer

    Science.gov (United States)

    Butschke, Joerg; Irmscher, Mathias; Koepernik, Corinna; Martens, Stephan; Sailer, Holger; Schnabel, Bernd

    2015-03-01

    Targeting mass production of nanostructures, nanoimprint lithography (NIL) is one of the most cost-effective ways to do so. One of the most critical topics is the pattern quality of the imprint master template. Therefore the new Vistec SB4050 VSB e-beam writer has been evaluated regarding its capability for state-of-the-art NIL template and DOE making. Equipped with a new air bearing stage the tool can expose a wide variety of substrates including large and heavy ones. For 9035 substrates a placement accuracy of 9nm (3sigma) as well as an overlay accuracy of 7nm (3sigma) with a mean error below 2nm has been achieved. Targeting for minimum feature size, a resolution below 30nm has been achieved for both, dense lines and holes pattern even using CAR. In addition, 3D structuring capability has been proved by applying GenISys' Layout Beamer calibrated for an appropriate negative tone resist. Further investigation has been done on shot count optimization regarding circular holes respective pillars. Using a feature size dependent segmentation, writing time reduction could be achieved keeping the original feature shape. Besides screening of typical tool parameter an application driven evaluation has been done by fabricating different type of templates based on silicon and quartz. 2D and 3D features have been realized. Furthermore holograms have been fabricated and proved for their performance by optical measurements.

  12. Digital Diffractive Optics: An Introduction to Planar Diffractive Optics and Related Technology

    Science.gov (United States)

    Kress, B.; Meyrueis, P.

    2000-10-01

    Diffractive optical elements (DOEs) are becoming more and more widely used in a braod range of fields, including telecommunications, optical computing, consumer electronics, laser material processing and the biomedical sciences, to manipulate light through micro-optical systems. In order to get the most out of such DOEs, knowledge of the design process, fabrication, packaging in a particular system, and operation is required. Digital Diffractive Optics discusses in detail the design and simulation of DOEs, before considering the main fabrication techniques. The increasingly important CAD/CAM tool requirements for the production of DOEs are covered, and a chapter is devoted to the crucial area of systematic fabrication error compensation. Finally, the integration and use of DOEs in a number of different systems, including various opto-electronic and opto-mechanical systems, are discussed. Digital Diffractive Optics will be of great interest to all those involved in the fields of optical engineering and photonics. It presents a clear view of the whole process, from design to fabrication and application, without overstressing the, often complex, mathematics, and will thus be accessible to postgraduate students and those entering the field, as well as more experienced engineers and scientists.

  13. Flat hat glass diffractive optical beam shaper

    Science.gov (United States)

    Reichel, Steffen; Petzold, Uwe; Biertuempfel, Ralf; Vogt, Helge

    2009-02-01

    Many laser applications need a homogeneous - so called flat hat - light distribution in the application area. However, many laser emit Gaussian shaped light. The technology of diffractive optical elements (DOE) can be used to shape the Gaussian beam into a flat hat beam at a compact length. SCHOTT presents a DOE design of a flat hat DOE beam shaper made out of optical glass. Here the material glass has the significant advantage of high laser durability, low scattering losses, high resistance to temperature, moisture, and chemicals compared to polymer DOEs. Simulations and measurements on different DOEs for different wavelength, laser beam width, and laser divergence are presented. Surprisingly the flat hat DOE beam shaper depends only weakly on wavelength and beam width but strongly on laser divergence. Based on the good agreement between simulation and measurement an improved flat hat DOE beam shaper is also presented.

  14. Monomer diffusion in sustainable photopolymers for diffractive optics applications

    OpenAIRE

    Gallego Rico, Sergi; Márquez Ruiz, Andrés; Ortuño Sánchez, Manuel; Marini, Stephan; Pascual Villalobos, Inmaculada; Beléndez Vázquez, Augusto

    2011-01-01

    Photopolymers have many applications in optics. However, one of the main drawbacks of these materials is the high toxicity of their components. One of the most widely studied photopolymers is polyvinyl-alcohol/acrylamide, and the carcinogenic potential of acrylamide is well known. In this paper we propose a new sustainable photopolymer as a substitute for acrylamide based photopolymers in the manufacture of diffractive optical elements. Diffraction efficiencies of around 40% were achieved for...

  15. Computational imaging using lightweight diffractive-refractive optics

    KAUST Repository

    Peng, Yifan

    2015-11-23

    Diffractive optical elements (DOE) show great promise for imaging optics that are thinner and more lightweight than conventional refractive lenses while preserving their light efficiency. Unfortunately, severe spectral dispersion currently limits the use of DOEs in consumer-level lens design. In this article, we jointly design lightweight diffractive-refractive optics and post-processing algorithms to enable imaging under white light illumination. Using the Fresnel lens as a general platform, we show three phase-plate designs, including a super-thin stacked plate design, a diffractive-refractive-hybrid lens, and a phase coded-aperture lens. Combined with cross-channel deconvolution algorithm, both spherical and chromatic aberrations are corrected. Experimental results indicate that using our computational imaging approach, diffractive-refractive optics is an alternative candidate to build light efficient and thin optics for white light imaging.

  16. Computational imaging using lightweight diffractive-refractive optics.

    Science.gov (United States)

    Peng, Yifan; Fu, Qiang; Amata, Hadi; Su, Shuochen; Heide, Felix; Heidrich, Wolfgang

    2015-11-30

    Diffractive optical elements (DOE) show great promise for imaging optics that are thinner and more lightweight than conventional refractive lenses while preserving their light efficiency. Unfortunately, severe spectral dispersion currently limits the use of DOEs in consumer-level lens design. In this article, we jointly design lightweight diffractive-refractive optics and post-processing algorithms to enable imaging under white light illumination. Using the Fresnel lens as a general platform, we show three phase-plate designs, including a super-thin stacked plate design, a diffractive-refractive-hybrid lens, and a phase coded-aperture lens. Combined with cross-channel deconvolution algorithm, both spherical and chromatic aberrations are corrected. Experimental results indicate that using our computational imaging approach, diffractive-refractive optics is an alternative candidate to build light efficient and thin optics for white light imaging.

  17. Optical laue diffraction on photonic structures designed by laser lithography

    Science.gov (United States)

    Samusev, K. B.; Rybin, M. V.; Lukashenko, S. Yu.; Limonov, M. F.

    2016-06-01

    Two-dimensional photonic crystals with square symmetry C 4v were obtained using the laser lithography method. The structure of these samples was studied by scanning electron microscopy. Optical Laue diffraction for monochromatic light was studied experimentally depending on the incidence angle of laser beam and lattice constant. Interpretation of the observed diffraction patterns is given in the framework of the Laue diffraction mechanism for an one-dimensional chain of scattering elements. Red thresholds for different diffraction orders were determined experimentally and theoretically. The results of calculations are in an excellent agreement with experiment.

  18. Amplitude image processing by diffractive optics.

    Science.gov (United States)

    Cagigal, Manuel P; Valle, Pedro J; Canales, V F

    2016-02-22

    In contrast to the standard digital image processing, which operates over the detected image intensity, we propose to perform amplitude image processing. Amplitude processing, like low pass or high pass filtering, is carried out using diffractive optics elements (DOE) since it allows to operate over the field complex amplitude before it has been detected. We show the procedure for designing the DOE that corresponds to each operation. Furthermore, we accomplish an analysis of amplitude image processing performances. In particular, a DOE Laplacian filter is applied to simulated astronomical images for detecting two stars one Airy ring apart. We also check by numerical simulations that the use of a Laplacian amplitude filter produces less noisy images than the standard digital image processing.

  19. Diffractive Optics of Anisotropic Polarization Gratings

    NARCIS (Netherlands)

    Xu, M.

    2009-01-01

    Diffraction gratings are being used to manipulate light in many different applications, such as in flat panel display systems, modern lighting systems, and optical recording. Diffraction gratings can be made polarization selective due to form birefringence. An alternative approach to polarization

  20. Refractive and diffractive neutron optics with reduced chromatic aberration

    DEFF Research Database (Denmark)

    Poulsen, Stefan Othmar; Poulsen, Henning Friis; Bentley, P.M.

    2014-01-01

    by the use of optics for focusing and imaging. Refractive and diffractive optical elements, e.g. compound refractive lenses and Fresnel zone plates, are attractive due to their low cost, and simple alignment. These optical elements, however, suffer from chromatic aberration, which limit their effectiveness...... path to focus and image a time-of-flight beam, and (2) a passive optical element consisting of a compound refractive lens, and a Fresnel zone plate, which may focus and image both continuous and pulsed neutron beams....... to highly monochromatic beams. This paper presents two novel concepts for focusing and imaging non-monochromatic thermal neutron beams with well-known optical elements: (1) a fast mechanical transfocator based on a compound refractive lens, which actively varies the number of individual lenses in the beam...

  1. Elements of quantum optics

    CERN Document Server

    Meystre, Pierre

    2007-01-01

    Elements of Quantum Optics gives a self-contained and broad coverage of the basic elements necessary to understand and carry out research in laser physics and quantum optics, including a review of basic quantum mechanics and pedagogical introductions to system-reservoir interactions and to second quantization. The text reveals the close connection between many seemingly unrelated topics, such as probe absorption, four-wave mixing, optical instabilities, resonance fluorescence and squeezing. It also comprises discussions of cavity quantum electrodynamics and atom optics. The 4th edition includes a new chapter on quantum entanglement and quantum information, as well as added discussions of the quantum beam splitter, electromagnetically induced transparency, slow light, and the input-output formalism needed to understand many problems in quantum optics. It also provides an expanded treatment of the minimum-coupling Hamiltonian and a simple derivation of the Gross-Pitaevskii equation, an important gateway to rese...

  2. Geometrical optics and the diffraction phenomenon

    Energy Technology Data Exchange (ETDEWEB)

    Timofeev, Aleksandr V [Russian Research Centre ' Kurchatov Institute' , Moscow (Russian Federation)

    2005-06-30

    This note outlines the principles of the geometrical optics of inhomogeneous waves whose description necessitates the use of complex values of the wave vector. Generalizing geometrical optics to inhomogeneous waves permits including in its scope the analysis of the diffraction phenomenon. (methodological notes)

  3. Compact sorting of optical vortices by means of diffractive transformation optics

    OpenAIRE

    Ruffato, Gianluca; Massari, Michele; Romanato, Filippo

    2016-01-01

    The orbital angular momentum (OAM) of light has recently attracted a growing interest as a new degree of freedom in order to increase the information capacity of today optical networks both for free-space and optical fiber transmission. Here we present our work of design, fabrication and optical characterization of diffractive optical elements for compact OAM-mode division demultiplexing based on optical transformations. Samples have been fabricated with 3D high-resolution electron beam litho...

  4. Scattering optical elements: stand-alone optical elements exploiting multiple light scattering

    CERN Document Server

    Park, Jongchan; Park, Chunghyun; Lee, KyeoReh; Lee, Heon; Cho, Yong-Hoon; Park, YongKeun

    2016-01-01

    Optical design and fabrication techniques are crucial for making optical elements. From conventional lenses to diffractive optical elements, and to recent metasurfaces, various types of optical elements have been proposed to manipulate light where optical materials are fabricated into desired structures. Here, we propose a scattering optical element (SOE) which exploits multiple light scattering and wavefront shaping. Instead of fabricating optical materials, the SOE consists of a disordered medium and a photopolymer-based wavefront recorder, with shapes the wavefront of impinging light on demand. With the proposed stand-alone SOEs, we experimentally demonstrate control of various properties of light, including intensity, polarisation, spectral frequency and near field. Due to the tremendous freedom brought about by disordered media, the proposed approach will provide unexplored routes to manipulate arbitrary optical fields in stand-alone optical elements.

  5. X-Ray Diffractive Optics

    Science.gov (United States)

    Dennis, Brian; Li, Mary; Skinner, Gerald

    2013-01-01

    X-ray optics were fabricated with the capability of imaging solar x-ray sources with better than 0.1 arcsecond angular resolution, over an order of magnitude finer than is currently possible. Such images would provide a new window into the little-understood energy release and particle acceleration regions in solar flares. They constitute one of the most promising ways to probe these regions in the solar atmosphere with the sensitivity and angular resolution needed to better understand the physical processes involved. A circular slit structure with widths as fine as 0.85 micron etched in a silicon wafer 8 microns thick forms a phase zone plate version of a Fresnel lens capable of focusing approx. =.6 keV x-rays. The focal length of the 3-cm diameter lenses is 100 microns, and the angular resolution capability is better than 0.1 arcsecond. Such phase zone plates were fabricated in Goddard fs Detector Development Lab. (DDL) and tested at the Goddard 600-microns x-ray test facility. The test data verified that the desired angular resolution and throughput efficiency were achieved.

  6. Optical image encryption based on diffractive imaging.

    Science.gov (United States)

    Chen, Wen; Chen, Xudong; Sheppard, Colin J R

    2010-11-15

    In this Letter, we propose a method for optical image encryption based on diffractive imaging. An optical multiple random phase mask encoding system is applied, and one of the phase-only masks is selected and laterally translated along a preset direction during the encryption process. For image decryption, a phase retrieval algorithm is proposed to extract a high-quality plaintext. The feasibility and effectiveness of the proposed method are demonstrated by numerical results. The proposed method can provide a new strategy instead of conventional interference methods, and it may open up a new research perspective for optical image encryption.

  7. Test of mode-division multiplexing and demultiplexing in free-space with diffractive transformation optics

    OpenAIRE

    Ruffato, Gianluca; Massari, Michele; Parisi, Giuseppe; Romanato, Filippo

    2016-01-01

    In recent years, mode-division multiplexing (MDM) has been proposed as a promising solution in order to increase the information capacity of optical networks both in free-space and in optical fiber transmission. Here we present the design, fabrication and test of diffractive optical elements for mode-division multiplexing based on optical transformations in the visible range. Diffractive optics have been fabricated by means of 3D high-resolution electron beam lithography on polymethylmethacry...

  8. Diffraction limited optics for single atom manipulation

    CERN Document Server

    Sortais, Y R P; Browaeys, A; Fournet, P; Grangier, P; Lamare, M; Lance, A M; Marion, H; Mercier, R; Messin, G; Tuchendler, C

    2006-01-01

    We present an optical system designed to capture and observe a single neutral atom in an optical dipole trap, created by focussing a laser beam using a large numerical aperture N.A.=0.5 aspheric lens. We experimentally evaluate the performance of the optical system and show that it is diffraction limited over a broad spectral range (~ 200 nm) with a large transverse field (+/- 25 microns). The optical tweezer created at the focal point of the lens is able to trap single atoms of 87Rb and to detect them individually with a large collection efficiency. We measure the oscillation frequency of the atom in the dipole trap, and use this value as an independent determination of the waist of the optical tweezer. Finally, we produce with the same lens two dipole traps separated by 2.2 microns and show that the imaging system can resolve the two atoms.

  9. New approaches in diffraction based optical metrology

    Science.gov (United States)

    Ebert, M.; Vanoppen, P.; Jak, M.; v. d. Zouw, G.; Cramer, H.; Nooitgedagt, T.; v. d. Laan, H.

    2016-03-01

    Requirements for on-product overlay, focus and CD uniformity continue to tighten in order to support the demands of 10nm and 7nm nodes. This results in the need for simultaneously accurate, robust and dense metrology data as input for closed-loop control solutions thereby enabling wafer-level control and high order corrections. In addition the use of opaque materials and stringent design rules drive the need for expansion of the available measurement wavelengths and metrology target design space. Diffraction based optical metrology has been established as the leading methodology for integrated as well as standalone optical metrology for overlay, focus and CD monitoring and control in state of the art chip manufacturing. We are presenting the new approaches to diffraction based optical metrology designed to meet the processing diffraction based metrology signals. In this paper we will present the new detection principle and its impact on key performance characteristics of overlay and focus measurements. We will also describe the wide range of applications of a newly introduced increased measurement spot size, enabling significant improvements to accuracy and process robustness of overlay and focus measurements. With the YS350E the optical CD measurement capability is also extended, to 10x10μm2 targets. We will discuss the performance and value of small targets in after-develop and after-etch applications.

  10. Integrated Diffractive Optics for Surface Ion Traps

    Science.gov (United States)

    Streed, Erik; Ghadimi, Moji; Blums, Valdis; Norton, Benjamin; Connor, Paul; Amini, Jason; Volin, Curtis; Lobino, Mirko; Kielpinski, David

    2016-05-01

    Photonic interconnects are a bottleneck to achieving large-scale trapped ion quantum computing. We have modified a Georgia Tech Research Institute microwave chip trap by using e-beam lithography to write reflective diffractive collimating optics (80 μm x 127 μm, f=58.6 μm, λ=369.5nm) on the center electrode. The optics have an NA of 0.55 x 0.73, capturing 13.2% of the solid angle. To evaluate the optics 174Yb+ was loaded by isotope selective photo-ionization from a thermal oven and then shuttled to imaging sites. Near diffraction limited sub-wavelength ion images were obtained with an observed spot sized FWHM of 338 nm x 268 nm vs. a diffraction limit of 336 nm x 257 nm. The total photon collection efficiency was measured to be 5.2+/-1.2%. Coupling into a single mode fiber of up to 2.0+/-0.6% was observed, limited by mismatch in the coupling optics. Image mode quality indicates coupling up to 4% may be possible. Funding from Australian Research Council and IARPA.

  11. Compact sorting of optical vortices by means of diffractive transformation optics

    CERN Document Server

    Ruffato, Gianluca; Romanato, Filippo

    2016-01-01

    The orbital angular momentum (OAM) of light has recently attracted a growing interest as a new degree of freedom in order to increase the information capacity of today optical networks both for free-space and optical fiber transmission. Here we present our work of design, fabrication and optical characterization of diffractive optical elements for compact OAM-mode division demultiplexing based on optical transformations. Samples have been fabricated with 3D high-resolution electron beam lithography on polymethylmethacrylate (PMMA) resist layer spun over a glass substrate. Their high compactness and efficiency make these optical devices promising for integration into next-generation platforms for OAM-modes processing in telecom applications.

  12. Surface diffusion studies by optical diffraction techniques

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, X.D.

    1992-11-01

    The newly developed optical techniques have been combined with either second harmonic (SH) diffraction or linear diffraction off a monolayer adsorbate grating for surface diffusion measurement. Anisotropy of surface diffusion of CO on Ni(l10) was used as a demonstration for the second harmonic dim reaction method. The linear diffraction method, which possesses a much higher sensitivity than the SH diffraction method, was employed to study the effect of adsorbate-adsorbate interaction on CO diffusion on Ni(l10) surface. Results showed that only the short range direct CO-CO orbital overlapping interaction influences CO diffusion but not the long range dipole-dipole and CO-NI-CO interactions. Effects of impurities and defects on surface diffusion were further explored by using linear diffraction method on CO/Ni(110) system. It was found that a few percent S impurity can alter the CO diffusion barrier height to a much higher value through changing the Ni(110) surface. The point defects of Ni(l10) surface seem to speed up CO diffusion significantly. A mechanism with long jumps over multiple lattice distance initiated by CO filled vacancy is proposed to explain the observed defect effect.

  13. Numerical simulation of optical vortex propagation and reflection by the methods of scalar diffraction theory

    Energy Technology Data Exchange (ETDEWEB)

    Petrov, Nikolay V; Pavlov, Pavel V; Malov, A N

    2013-06-30

    Using the equations of scalar diffraction theory we consider the formation of an optical vortex on a diffractive optical element. The algorithms are proposed for simulating the processes of propagation of spiral wavefronts in free space and their reflections from surfaces with different roughness parameters. The given approach is illustrated by the results of numerical simulations. (propagation of wave fronts)

  14. Linear systems approach to simulation of optical diffraction.

    Science.gov (United States)

    Lambert, A J; Fraser, D

    1998-12-01

    The diffractive processes within an optical system can be simulated by computer to compute the diffraction-altered electric-field distribution at the output of the system from the electric-field distribution at the input. In the paraxial approximation the system can be described by an ABCD ray matrix whose elements in turn can be used to simplify the computation such that only a single computational step is required. We describe two rearrangements of such computations that allow the simulation to be expressed in a linear systems formulation, in particular using the fast-Fourier-transform algorithm. We investigate the sampling requirements for the kernel-modifying function or chirp that arises. We also use the special properties of the chirp to determine the spreading imposed by the diffraction. This knowledge can be used to reduce the computation if only a limited region of either the input or the output is of interest.

  15. Refractive and diffractive neutron optics with reduced chromatic aberration

    Energy Technology Data Exchange (ETDEWEB)

    Poulsen, S.O., E-mail: stefan.poulsen@northwestern.edu [NEXMAP, Department of Physics, Technical University of Denmark, Anker Engelunds Vej 1, 2800 Kgs. Lyngby (Denmark); Department of Materials Science and Engineering, Northwestern University, Evanston, IL 60208 (United States); Poulsen, H.F. [NEXMAP, Department of Physics, Technical University of Denmark, Anker Engelunds Vej 1, 2800 Kgs. Lyngby (Denmark); Bentley, P.M. [European Spallation Source ESS AB, Box 176, 221 00 Lund (Sweden)

    2014-12-11

    Thermal neutron beams are an indispensable tool in physics research. The spatial and the temporal resolution attainable in experiments are dependent on the flux and collimation of the neutron beam which remain relatively poor, even for modern neutron sources. These difficulties may be mitigated by the use of optics for focusing and imaging. Refractive and diffractive optical elements, e.g. compound refractive lenses and Fresnel zone plates, are attractive due to their low cost, and simple alignment. These optical elements, however, suffer from chromatic aberration, which limit their effectiveness to highly monochromatic beams. This paper presents two novel concepts for focusing and imaging non-monochromatic thermal neutron beams with well-known optical elements: (1) a fast mechanical transfocator based on a compound refractive lens, which actively varies the number of individual lenses in the beam path to focus and image a time-of-flight beam, and (2) a passive optical element consisting of a compound refractive lens, and a Fresnel zone plate, which may focus and image both continuous and pulsed neutron beams.

  16. New approach to imaging spectroscopy using diffractive optics

    Science.gov (United States)

    Hinnrichs, Michele; Massie, Mark A.

    1997-10-01

    Over the past several years, Pacific Advanced Technology (PAT) has developed several hyperspectral imagers using diffractive optics as the dispersive media. This new approach has been patented and demonstrated in numerous field tests. PAT has developed hyperspectral cameras in the visible, mid-wave IR and is currently under contrast to the Air Force to develop a dual band hyperspectral lens for simultaneous spectral imaging in both the mid-wave and long- wave IR. The development of these cameras over the years have been sponsored by internal research and development, contracts from the Air Force Phillips Lab., Air Force Wright Labs Armament Division, BMDO and by the Office of Naval Research. Numerous papers have been presented in the past describing the performance of these various hyperspectral cameras. The purpose of this paper is to describe the theory behind the image multi-spectral sensing (IMSS) used in these hyperspectral cameras. IMSS utilizes a very simple optical design that enables a robust and low cost hyper-spectral imaging instrument. The IMSS is a dispersive spectrometer using a single diffractive optical element for both imaging and dispersion. The lens is tuned for a single wavelength giving maximum diffraction efficiency at that wavelength and high efficiency throughout the spectral band-pass of the camera. The diffractive optics disperse the light along the optical axis as opposed to perpendicular to the axis in conventional dispersive spectrometers. A detector array is used as the sensing medium and the spectral images are rad out electronically. POst processing is used to reduce spectral cross talk and to spatially sharpen the spectral images.

  17. Nanofabrication and test of novel diffractive optics for OAM-mode division multiplexing in optical fibers

    Science.gov (United States)

    Ruffato, G.; Massari, M.; Romanato, F.

    2016-09-01

    The orbital angular momentum (OAM) of light offers a promising solution to today's overwhelming demand of bandwidth and has known an increasing attention as a new degree of freedom in the telecom field. Here we present the design, fabrication and optical characterization of miniaturized phase-only diffractive optical elements (DOE) for OAM beams generation, multiplexing and sorting. Samples have been fabricated with high-resolution electron-beam lithography and exhibit high fabrication quality. Different DOE designs are presented for the sorting of optical vortices with different steering geometries in far-field and applications in free-space and optical fibers.

  18. High-contrast process using a positive-tone resist with antistatic coating and high-energy (100-keV) e-beam lithography for fabricating diffractive optical elements (DOE) on quartz

    Science.gov (United States)

    Poli, Louis C.; Kondek, Christine A.; Shoop, Barry L.; McLane, George F.

    1995-06-01

    Diffractive optical elements (DOE) are becoming important as optical signal processing elements in increasingly diverse applications. These elements, fabricated on quartz, may be used as phase shift type masks or as embedded components that implement a transfer function within a processing network. A process is under development for the fabrication of a DOE implementing a Jervis error diffusion kernel for research in half tone image processing. Dry etching is performed after lithography and pattern transfer through a nickel mask. This results in etched areal features on the substrate. An optical diffraction medium is thus created. Lithographic patterning is done by e-beam lithography (EBL) to realize small features, but also offers the important advantage of a large depth of field which relaxes the problem of complex surface topology. The recent availability of high energy (100 KeV) lithography tools provides a capability for precision overlay, small feature resolution, and enhanced image contrast through a lower induced proximity effect. Patterning by EBL on insulating substrates is complicated by the necessity of providing a vehicle for the avoidance of charge buildup on the surface. In a previously presented paper a methodology was shown for the use of TQV-501 (Nitto Chemical) antistatic compound as a final spin on film for use with PMMA and SAL-601 (Shipley). In this current work, a process is described using EBL and a high performance positive resist working with a final film layer of antistatic TQV-501 on a nickel coated wafer. The process may then be reapplied to realize additional lithographic levels in registration, for multilevel DOE components. High energy (100 KeV) EBL is used to provide high quality pattern definition. The e-beam sensitive resist, ZEP-320-37 (Nagase Chemical) in dilution, together with a top film layer of TQV-501 serves as a bilevel resist system and is used for patterning the desired image before definition of the nickel mask through

  19. Polarisation-sensitive optical elements in azobenzene polyesters and peptides

    DEFF Research Database (Denmark)

    Ramanujam, P.S.; Dam-Hansen, Carsten; Berg, Rolf Henrik;

    2006-01-01

    In this article, we describe fabrication of polarisation holographic optical elements in azobenzene polyesters. Both liquid crystalline and amorphous side-chain polyesters have been utilised. Diffractive optical elements such as lenses and gratings that are sensitive to the polarisation...... of the incident light have been fabricated with polarisation holography. Computer-generated optical elements and patterns have also been written with a single polarised laser beam. Recording of polarisation defects enabling easy visualisation is also shown to be feasible in azobenzene polyesters....

  20. Optical position encoder based on four-section diffraction grating

    Science.gov (United States)

    Zherdev, A. Y.; Odinokov, S. B.; Lushnikov, D. S.; Markin, V. V.; Gurylev, O. A.; Shishova, M. V.

    2017-05-01

    Optical position encoder consists of movable coding grating and fixed analyzing grating. Light passing and diffracting through these two gratings creates interference signal on optical detector. Decoding of interference signal phase allows to determinate current position. Known optical position encoders use several accurate adjusted optical channels and detectors to gather several signals with different phase for higher encoder accuracy. We propose to use one optical channel with several-section analyzing diffraction grating for this purpose to simplify optical scheme and adjusting requirements. Optical scheme of position encoder based on four-section analyzing diffraction grating is developed and described in this paper.

  1. X-ray monitoring optical elements

    Energy Technology Data Exchange (ETDEWEB)

    Stoupin, Stanislav; Shvydko, Yury; Katsoudas, John; Blank, Vladimir D.; Terentyev, Sergey A.

    2016-12-27

    An X-ray article and method for analyzing hard X-rays which have interacted with a test system. The X-ray article is operative to diffract or otherwise process X-rays from an input X-ray beam which have interacted with the test system and at the same time provide an electrical circuit adapted to collect photoelectrons emitted from an X-ray optical element of the X-ray article to analyze features of the test system.

  2. Analysis of LCoS displays performance in diffractive optics

    Science.gov (United States)

    Lizana, A.; Lobato, L.; Iemmi, C.; Márquez, A.; Moreno, I.; Campos, J.; Yzuel, M. J.

    2010-06-01

    In this paper, we describe the Mueller-Jones combined method which is useful to optimize the LCoS displays phase response. This method, by means of the experimentally obtained Mueller matrices of the device, enables to obtain pairs of states of polarization (for the generation and for the detection states), which lead to the phase-only modulation regime. Moreover, some experimental results are provided as a function of the incident angle, wavelength and gray level. In addition, we also show the strong dependence of the LCoS performance with the signal addressed to the device, which affects the value of different physical parameters, such as the global phase-shift or the time-fluctuations in phase. Retardance curve and time-fluctuations in phase for the different sequences studied are obtained from the experimental Mueller matrices (the former) and by using a diffractive based set-up (the latter). The efficiency of basic diffractive optical elements is tested with the LCoS display, emphasizing the suitability of the best electrical sequence found when used in diffractive optics.

  3. Optical generation of non-diffracting beams via photorefractive holography

    CERN Document Server

    Vieira, Tarcio A; Gesualdi, Marcos R R; Zamboni-Rached, Michel

    2015-01-01

    This work presents, for the first time the optical generation of non-diffracting beams via photorefractive holography. Optical generation of non-diffracting beams using conventional optics components is difficult and, in some instances, unfeasible, as it is wave fields given by superposition of non-diffracting beams. It is known that computer generated holograms and spatial light modulators (SLMs) successfully generate such beams. With photorefractive holography technique, the hologram of a non-diffracting beam is constructed (recorded) and reconstructed (reading) optically in a nonlinear photorefractive medium. The experimental realization of a non-diffracting beam was made in a photorefractive holography setup using a photorefractive Bi12SiO20 (BSO) crystal as the holographic recording medium, where the non-diffracting beams, the Bessel beam arrays and superposition of co-propagating Bessel beams (Frozen Waves) were obtained experimentally. The experimental results are in agreement with the theoretically pr...

  4. High throughput optoelectronic smart pixel systems using diffractive optics

    Science.gov (United States)

    Chen, Chih-Hao

    1999-12-01

    algorithm to design Diffractive Optical Elements (DOEs) having higher uniformity and better signal-to-noise ratio. The algorithm is based on nonlinear least-square optimization procedures and phase-shifting quantization scheme to minimize the reconstruction error of DOEs. We also describe a modified diffractive microlens design algorithm to overcome linewidth limitations in fabrication while achieving higher numerical aperture and better power efficiency. Several diffractive optical devices used in our smart pixel systems, including microlens arrays and spot array generators, are designed by these algorithms, and have been fabricated and characterized for system integration.

  5. Diffractive optics and micro-optics: introduction to the feature issue.

    Science.gov (United States)

    Magnusson, R; Gale, M T

    2001-11-10

    This issue of Applied Optics features 16 papers on the fabrication, design, and applications of diffractive optics and micro-optics. A companion issue of the Journal of the Optical Society of America A, guest edited by J. N. Mait and H. P. Herzig, presents papers that emphasize the modeling and design of diffractive and micro-optical components.

  6. Diffractive generalized phase contrast for adaptive phase imaging and optical security

    DEFF Research Database (Denmark)

    Palima, Darwin; Glückstad, Jesper

    2012-01-01

    We analyze the properties of Generalized Phase Contrast (GPC) when the input phase modulation is implemented using diffractive gratings. In GPC applications for patterned illumination, the use of a dynamic diffractive optical element for encoding the GPC input phase allows for onthe- fly...... optimization of the input aperture parameters according to desired output characteristics. For wavefront sensing, the achieved aperture control opens a new degree of freedom for improving the accuracy of quantitative phase imaging. Diffractive GPC input modulation also fits well with grating-based optical...

  7. Design and optimization of broadband wide-angle antireflection structures for binary diffractive optics.

    Science.gov (United States)

    Chang, Chih-Hao; Waller, Laura; Barbastathis, George

    2010-04-01

    We propose a class of antireflecting structures that can effectively suppress reflections for binary diffractive optics. In this structure, multiple periodic thin films with gradually varying refractive indices are used to shift all reflected diffraction to the transmitted orders. The structure is optimized to operate over broad bands and wide angles using rigorous coupled-wave analysis and genetic algorithms. We validated the structure numerically using finite-difference time-domain methods. The proposed structure may lead to more efficient diffractive devices for applications in thin-film photovoltaic, waveguide coupler, and holographic optical elements.

  8. PROPOSAL OF NEW OPTICAL ELEMENTS

    Directory of Open Access Journals (Sweden)

    Goce Chadzitaskos

    2013-10-01

    Full Text Available A overview of our patented proposals of new optical elements is presented. The elements are suitable for laser pulse analysis, telescopy, X-ray microscopy and X-ray telescopy. They are based on the interference properties of light: a special grating for a double slit pattern, parabolic strip imaging for a telescope, and Bragg’s condition for X-ray scattering on a slice of a single crystal for X-raymicroscopy and X-ray telescopy.

  9. Three dimensional analysis of chromatic aberration in diffractive elements with extended depth of focus.

    Science.gov (United States)

    Mas, D; Espinosa, J; Perez, J; Illueca, C

    2007-12-24

    The paper presents the polychromatic analysis of two diffractive optical elements with extended depth of focus: the linear axicon and the light sword optical element. Chromatic aberration produces axial displacement of the focal segment line. Thus, we explore the possibility of extending the focal depth of these elements to permit superposition of the chromatic foci. In the case of an axicon, we achieve an achromatic zone where focusing is produced. In the case of the light sword element, we show that the focusing segment is out of axis. Therefore a superposition of colors is produced, but not on axis overlapping. Instead, three colored and separated foci are simultaneously obtained in a single plane. Three dimensional structures of the propagated beams are analyzed in order to provide better understanding of the properties and applications of such elements.

  10. Generation of arbitrary complex quasi-non-diffracting optical patterns

    CERN Document Server

    Ortiz-Ambriz, Antonio; Kartashov, Yaroslav V; Vysloukh, Victor A; Petrov, Dmitri; Garcia-Gracia, Hipolito; Gutiérrez-Vega, Julio C; Torner, Lluis

    2013-01-01

    Due to their unique ability to maintain an intensity distribution upon propagation, non-diffracting light fields are used extensively in various areas of science, including optical tweezers, nonlinear optics and quantum optics, in applications where complex transverse field distributions are required. However, the number and type of rigorously non-diffracting beams is severely limited because their symmetry is dictated by one of the coordinate system where the Helmholtz equation governing beam propagation is separable. Here, we demonstrate a powerful technique that allows the generation of a rich variety of quasi-non-diffracting optical beams featuring nearly arbitrary intensity distributions in the transverse plane. These can be readily engineered via modifications of the angular spectrum of the beam in order to meet the requirements of particular applications. Such beams are not rigorously non-diffracting but they maintain their shape over large distances, which may be tuned by varying the width of the angu...

  11. High diffraction efficiency of three-layer diffractive optics designed for wide temperature range and large incident angle.

    Science.gov (United States)

    Mao, Shan; Cui, Qingfeng; Piao, Mingxu; Zhao, Lidong

    2016-05-01

    A mathematical model of diffraction efficiency and polychromatic integral diffraction efficiency affected by environment temperature change and incident angle for three-layer diffractive optics with different dispersion materials is put forward, and its effects are analyzed. Taking optical materials N-FK5 and N-SF1 as the substrates of multilayer diffractive optics, the effect on diffraction efficiency and polychromatic integral diffraction efficiency with intermediate materials POLYCARB is analyzed with environment temperature change as well as incident angle. Therefore, three-layer diffractive optics can be applied in more wide environmental temperature ranges and larger incident angles for refractive-diffractive hybrid optical systems, which can obtain better image quality. Analysis results can be used to guide the hybrid imaging optical system design for optical engineers.

  12. Simplified optical image encryption approach using single diffraction pattern in diffractive-imaging-based scheme.

    Science.gov (United States)

    Qin, Yi; Gong, Qiong; Wang, Zhipeng

    2014-09-08

    In previous diffractive-imaging-based optical encryption schemes, it is impossible to totally retrieve the plaintext from a single diffraction pattern. In this paper, we proposed a new method to achieve this goal. The encryption procedure can be completed by proceeding only one exposure, and the single diffraction pattern is recorded as ciphertext. For recovering the plaintext, a novel median-filtering-based phase retrieval algorithm, including two iterative cycles, has been developed. This proposal not only extremely simplifies the encryption and decryption processes, but also facilitates the storage and transmission of the ciphertext, and its effectiveness and feasibility have been demonstrated by numerical simulations.

  13. Super-resolution optical telescopes with local light diffraction shrinkage

    OpenAIRE

    Changtao Wang; Dongliang Tang; Yanqin Wang; Zeyu Zhao; Jiong Wang; Mingbo Pu; Yudong Zhang; Wei Yan; Ping Gao; Xiangang Luo

    2015-01-01

    Suffering from giant size of objective lenses and infeasible manipulations of distant targets, telescopes could not seek helps from present super-resolution imaging, such as scanning near-field optical microscopy, perfect lens and stimulated emission depletion microscopy. In this paper, local light diffraction shrinkage associated with optical super-oscillatory phenomenon is proposed for real-time and optically restoring super-resolution imaging information in a telescope system. It is found ...

  14. Diffractive optics for combined spatial- and mode- division demultiplexing of optical vortices: design, fabrication and optical characterization

    Science.gov (United States)

    Ruffato, Gianluca; Massari, Michele; Romanato, Filippo

    2016-04-01

    During the last decade, the orbital angular momentum (OAM) of light has attracted growing interest as a new degree of freedom for signal channel multiplexing in order to increase the information transmission capacity in today’s optical networks. Here we present the design, fabrication and characterization of phase-only diffractive optical elements (DOE) performing mode-division (de)multiplexing (MDM) and spatial-division (de)multiplexing (SDM) at the same time. Samples have been fabricated with high-resolution electron-beam lithography patterning a polymethylmethacrylate (PMMA) resist layer spun over a glass substrate. Different DOE designs are presented for the sorting of optical vortices differing in either OAM content or beam size in the optical regime, with different steering geometries in far-field. These novel DOE designs appear promising for telecom applications both in free-space and in multi-core fibers propagation.

  15. Gaussian mode selection with intracavity diffractive optics

    CSIR Research Space (South Africa)

    Litvin, IA

    2009-10-01

    Full Text Available element for mode shaping of a Nd:YAG laser,” Opt. Lett. 19, 108–110 (1994). 4. L. A. Romero, F. M. Dickey, “Lossless laser beam shaping,” J. Opt. Soc. Am. A 13, 751–760 (1996). 5. F. Gori, “Flattened gaussian beams,” Opt. Commun. 107, 335–341 (1994...

  16. Application of optical diffraction method in designing phase plates

    Science.gov (United States)

    Lei, Ze-Min; Sun, Xiao-Yan; Lv, Feng-Nian; Zhang, Zhen; Lu, Xing-Qiang

    2016-11-01

    Continuous phase plate (CPP), which has a function of beam shaping in laser systems, is one kind of important diffractive optics. Based on the Fourier transform of the Gerchberg-Saxton (G-S) algorithm for designing CPP, we proposed an optical diffraction method according to the real system conditions. A thin lens can complete the Fourier transform of the input signal and the inverse propagation of light can be implemented in a program. Using both of the two functions can realize the iteration process to calculate the near-field distribution of light and the far-field repeatedly, which is similar to the G-S algorithm. The results show that using the optical diffraction method can design a CPP for a complicated laser system, and make the CPP have abilities of beam shaping and phase compensation for the phase aberration of the system. The method can improve the adaptation of the phase plate in systems with phase aberrations.

  17. Diffractive-imaging-based optical image encryption with simplified decryption from single diffraction pattern.

    Science.gov (United States)

    Qin, Yi; Wang, Zhipeng; Gong, Qiong

    2014-07-01

    In this paper, we propose a novel method for image encryption by employing the diffraction imaging technique. This method is in principle suitable for most diffractive-imaging-based optical encryption schemes, and a typical diffractive imaging architecture using three random phase masks in the Fresnel domain is taken for an example to illustrate it. The encryption process is rather simple because only a single diffraction intensity pattern is needed to be recorded, and the decryption procedure is also correspondingly simplified. To achieve this goal, redundant data are digitally appended to the primary image before a standard encrypting procedure. The redundant data serve as a partial input plane support constraint in a phase retrieval algorithm, which is employed for completely retrieving the plaintext. Simulation results are presented to verify the validity of the proposed approach.

  18. Manufacture of refractive and diffractive beam-shaping elements in higher quantities using glass molding technology

    Science.gov (United States)

    Wolz, Michael; Blöcher, Ullrich; Dross, Gerhard; Schmitt, Jana; Bischoff, Christian; Umhofer, Udo

    2015-03-01

    Laser beam shaping elements can be used e.g. for material processing. The results of these processes can be improved when the usually Gaussian profile of the laser is transformed into a top hat profile, which can be circular or rectangular in shape. Another frequently used type of beam-forming devices are beam splitters for parallel processing using only one laser. These types of beam formers can be implemented as diffractive or refractive elements. So far these optics are produced either directly by means of lithography e.g. in glass or in plastic using a hot embossing process or nanoimprint technology. Elements produced in this way have either the disadvantage of high costs or they are limited in temperature range, laser power or wavelength. A newly developed molding process for glass allows the manufacture of larger numbers of optics with reduced cost. The production of molds for refractive top hat beam shaping devices requires very high precision of the applied grinding process. Form deviations below 100 nm are necessary to obtain a homogeneous illumination. Measurements of the surface topography of gauss to top hat beam shaping elements using white light interferometry are presented as well as results of optical measurements of the beam profile using a camera. Continuous diffractive beam shaping elements for beam splitting applications are designed to generate several sub-beams each carrying the same energy. In order to achieve this, form deviations of less than 50 nm are required. Measurements of the surface of a 1 x 5 beam splitter are compared with ideal beam splitter profiles. The resulting beam intensity distribution of a molded element is presented.

  19. Transferring diffractive optics from research to commercial applications: Part II - size estimations for selected markets

    Science.gov (United States)

    Brunner, Robert

    2014-04-01

    In a series of two contributions, decisive business-related aspects of the current process status to transfer research results on diffractive optical elements (DOEs) into commercial solutions are discussed. In part I, the focus was on the patent landscape. Here, in part II, market estimations concerning DOEs for selected applications are presented, comprising classical spectroscopic gratings, security features on banknotes, DOEs for high-end applications, e.g., for the semiconductor manufacturing market and diffractive intra-ocular lenses. The derived market sizes are referred to the optical elements, itself, rather than to the enabled instruments. The estimated market volumes are mainly addressed to scientifically and technologically oriented optical engineers to serve as a rough classification of the commercial dimensions of DOEs in the different market segments and do not claim to be exhaustive.

  20. Holographic optical elements recorded in silver halide sensitized gelatin emulsions. Part I. Transmission holographic optical elements.

    Science.gov (United States)

    Kim, J M; Choi, B S; Kim, S I; Kim, J M; Bjelkhagen, H I; Phillips, N J

    2001-02-10

    Silver halide sensitized gelatin (SHSG) holograms are similar to holograms recorded in dichromated gelatin (DCG), the main recording material for holographic optical elements (HOE's). The drawback of DCG is its low sensitivity and limited spectral response. Silver halide materials can be processed in such a way that the final hologram will have properties like a DCG hologram. Recently this technique has become more interesting since the introduction of new ultra-high-resolution silver halide emulsions. An optimized processing technique for transmission HOE's recorded in these materials is introduced. Diffraction efficiencies over 90% can be obtained for transmissive diffraction gratings. Understanding the importance of the selective hardening process has made it possible to obtain results similar to conventional DCG processing. The main advantage of the SHSG process is that high-sensitivity recording can be performed with laser wavelengths anywhere within the visible spectrum. This simplifies the manufacturing of high-quality, large-format HOE's.

  1. Optical diffraction for measurements of nano-mechanical bending

    CERN Document Server

    Hermans, Rodolfo I; Ndieyira, Joseph Wafula; McKendry, Rachel A; Aeppli, Gabriel

    2015-01-01

    Micromechanical transducers such as cantilevers for AFM often rely on optical readout methods that require illumination of a specific region of the microstructure. Here we explore and exploit the diffraction effects that have been previously neglected when modeling cantilever bending measurement techniques. The illumination of a cantilever end causes an asymmetric diffraction pattern at the photodetector that significantly affects the calibration of the signal in the popular optical beam deflection technique (OBDT). Conditions for optimized linear signals that avoid detection artifacts conflict with small numerical aperture illumination and narrow cantilevers which are softer and therefore more sensitive. Embracing diffraction patterns as a physical measurable allows a richer detection technique that decouples measurements of tilt and curvature and simultaneously relaxes the requirements on the alignment of illumination and detector. We show analytical results, numerical simulations and physiologically releva...

  2. Ultrafast electron diffraction studies of optically excited thin bismuth films

    Energy Technology Data Exchange (ETDEWEB)

    Rajkovic, Ivan

    2008-10-21

    This thesis contains work on the design and the realization of an experimental setup capable of providing sub-picosecond electron pulses for ultrafast electron diffraction experiments, and performing the study of ultrafast dynamics in bismuth after optical excitation using this setup. (orig.)

  3. Electro-optically tunable diffraction grating with photoaligned liquid crystals

    Science.gov (United States)

    Węgłowski, Rafał; Kozanecka-Szmigiel, Anna; Piecek, Wiktor; Konieczkowska, Jolanta; Schab-Balcerzak, Ewa

    2017-10-01

    This work shows the possibility of fabricating one- and two-dimensional diffraction structures based on liquid crystals photoaligned with the layers of photosensitive azobenzene poly(ester imide). The gratings involve a micron-sized planar-twisted nematic alignment. The diffraction efficiency of these gratings is controlled by a uniform electric field applied across the cell. The electro-optical measurements showed short switching times (0.8 ms and 7 ms for τrise and τdecay respectively) and low driving electric fields (1 . 5 V / μm) of 1st order diffracted light. The LC grating is regarded as an amplitude grating in the low electric field region and a phase grating in the high electric field region. Moreover the diffraction efficiency is polarization-independent in the wide range of external electric fields.

  4. Fiber-diffraction Interferometer using Coherent Fiber Optic Taper

    CERN Document Server

    Kihm, Hagyong

    2010-01-01

    We present a fiber-diffraction interferometer using a coherent fiber optic taper for optical testing in an uncontrolled environment. We use a coherent fiber optic taper and a single-mode fiber having thermally-expanded core. Part of the measurement wave coming from a test target is condensed through a fiber optic taper and spatially filtered from a single-mode fiber to be reference wave. Vibration of the cavity between the target and the interferometer probe is common to both reference and measurement waves, thus the interference fringe is stabilized in an optical way. Generation of the reference wave is stable even with the target movement. Focus shift of the input measurement wave is desensitized by a coherent fiber optic taper.

  5. Optical filters with fractal transmission spectra based on diffractive optics.

    Science.gov (United States)

    Mendoza-Yero, Omel; Mínguez-Vega, Gladys; Fernández-Alonso, Mercedes; Lancis, Jesús; Tajahuerce, Enrique; Climent, Vicent; Monsoriu, Juan A

    2009-03-01

    The duality between the axial irradiance distribution originated by any circularly symmetric diffracting aperture under monochromatic illumination and its diffracted spectral intensity at a fixed on-axis point under broadband illumination is highlighted and experimentally investigated. Two applications are derived from this basic result. On the one hand, we suggest the use of a broadband source and a spectrometer for a single-shot measurement of the axial response of pupil filters. Second, we implement a spectral filter having a transmission spectrum with a fractal structure of frequencies. Experimental results and potential applications in synthetic spectra designs are provided.

  6. Optical diffraction for measurements of nano-mechanical bending

    Science.gov (United States)

    Hermans, Rodolfo I.; Dueck, Benjamin; Ndieyira, Joseph Wafula; McKendry, Rachel A.; Aeppli, Gabriel

    2016-06-01

    We explore and exploit diffraction effects that have been previously neglected when modelling optical measurement techniques for the bending of micro-mechanical transducers such as cantilevers for atomic force microscopy. The illumination of a cantilever edge causes an asymmetric diffraction pattern at the photo-detector affecting the calibration of the measured signal in the popular optical beam deflection technique (OBDT). The conditions that avoid such detection artefacts conflict with the use of smaller cantilevers. Embracing diffraction patterns as data yields a potent detection technique that decouples tilt and curvature and simultaneously relaxes the requirements on the illumination alignment and detector position through a measurable which is invariant to translation and rotation. We show analytical results, numerical simulations and physiologically relevant experimental data demonstrating the utility of the diffraction patterns. We offer experimental design guidelines and quantify possible sources of systematic error in OBDT. We demonstrate a new nanometre resolution detection method that can replace OBDT, where diffraction effects from finite sized or patterned cantilevers are exploited. Such effects are readily generalized to cantilever arrays, and allow transmission detection of mechanical curvature, enabling instrumentation with simpler geometry. We highlight the comparative advantages over OBDT by detecting molecular activity of antibiotic Vancomycin.

  7. Optical diffraction by ordered 2D arrays of silica microspheres

    Science.gov (United States)

    Shcherbakov, A. A.; Shavdina, O.; Tishchenko, A. V.; Veillas, C.; Verrier, I.; Dellea, O.; Jourlin, Y.

    2017-03-01

    The article presents experimental and theoretical studies of angular dependent diffraction properties of 2D monolayer arrays of silica microspheres. High-quality large area defect-free monolayers of 1 μm diameter silica microspheres were deposited by the Langmuir-Blodgett technique under an accurate optical control. Measured angular dependencies of zeroth and one of the first order diffraction efficiencies produced by deposited samples were simulated by the rigorous Generalized Source Method taking into account particle size dispersion and lattice nonideality.

  8. Optical method for inspecting LSI patterns using reflected diffraction waves.

    Science.gov (United States)

    Kimura, S; Suda, K; Hase, S; Munakata, C

    1988-03-15

    An optical inspection method has been developed for finding defects in LSI lithographic patterns. A focused He-Ne laser beam scans the patterns on a wafer. The reflected diffraction waves around the wafer are observed. These diffraction waves indicate whether the patterns contain defects. To implement this judgment rapidly, signals of the waves characterizing the patterns are input directly into the address lines of random access memories. The system can detect a defect of ~0.8-microm diameter and inspect a 1-cm(2) chip in 9 s.

  9. Non-diffracting chirped Bessel waves in optical antiguides

    CERN Document Server

    Chremmos, Ioannis

    2015-01-01

    Chirped Bessel waves are introduced as stable (non-diffracting) solutions of the paraxial wave equation in optical antiguides with a power-law radial variation in their index of refraction. Through numerical simulations, we investigate the propagation of apodized (finite-energy) versions of such waves, with or without vorticity, in antiguides with practical parameters. The new waves exhibit a remarkable resistance against the defocusing effect of the unstable index potentials, outperforming standard Gaussians with the same full width at half maximum. The chirped profile persists even under conditions of eccentric launching or antiguide bending and is also capable of self-healing like standard diffraction-free beams in free space.

  10. Super-resolution optical telescopes with local light diffraction shrinkage

    Science.gov (United States)

    Wang, Changtao; Tang, Dongliang; Wang, Yanqin; Zhao, Zeyu; Wang, Jiong; Pu, Mingbo; Zhang, Yudong; Yan, Wei; Gao, Ping; Luo, Xiangang

    2015-12-01

    Suffering from giant size of objective lenses and infeasible manipulations of distant targets, telescopes could not seek helps from present super-resolution imaging, such as scanning near-field optical microscopy, perfect lens and stimulated emission depletion microscopy. In this paper, local light diffraction shrinkage associated with optical super-oscillatory phenomenon is proposed for real-time and optically restoring super-resolution imaging information in a telescope system. It is found that fine target features concealed in diffraction-limited optical images of a telescope could be observed in a small local field of view, benefiting from a relayed metasurface-based super-oscillatory imaging optics in which some local Fourier components beyond the cut-off frequency of telescope could be restored. As experimental examples, a minimal resolution to 0.55 of Rayleigh criterion is obtained, and imaging complex targets and large targets by superimposing multiple local fields of views are demonstrated as well. This investigation provides an access for real-time, incoherent and super-resolution telescopes without the manipulation of distant targets. More importantly, it gives counterintuitive evidence to the common knowledge that relayed optics could not deliver more imaging details than objective systems.

  11. Quantum Interferometric Optical Lithography Exploiting Entanglement to Beat The Diffraction Limit

    CERN Document Server

    Boto, A N; Williams, C P; Dowling, J P; Boto, Agedi N.; Abrams, Daniel S; Williams, Colin P.; Dowling, Jonathan P.

    1999-01-01

    Classical, interferometric, optical lithography is diffraction limited to writing features of a size lambda/4 or greater, where lambda is the optical wavelength. Using nonclassical photon number states, entangled N at a time, we show that it is possible to write features of minimum size lambda/(4N) in an N-photon absorbing substrate. This result surpasses the usual classical diffraction limit by a factor of N. Since the number of features that can be etched on a two-dimensional surface scales inversely as the square of the feature size, this allows one to write a factor of N^2 more elements on a semiconductor chip. A factor of N = 2 can be achieved easily with entangled photon pairs generated from optical parametric downconversion.

  12. Sub-diffraction-Limit Imaging in Optical Hyperlens

    Institute of Scientific and Technical Information of China (English)

    HU Ji-Gang; WANG Pei; LU Yong-Hua; MING Hai; CHEN Chun-Chong; CHEN Jun-Xue

    2008-01-01

    @@ Sub-diffraction-limit imaging in the optical hyperlens based on cylindrical metamaterials is studied. Some param-eters of hyperlens, such as the dispersive relation and the divergence angle of imaging, are numerically analysed with the ray trajectory method and effective medium theory. The dependence of imaging properties on dielectric constant is discussed. As a result, a 0° divergence angle is obtained for the best imaging effect. This work will be helpful for the design, structure fabrication and resolution improvement of the optical hyperlens.

  13. Pyramid diffraction in parity-time-symmetric optical lattices

    CERN Document Server

    Nixon, Sean

    2013-01-01

    Nonlinear dynamics of wave packets in two-dimensional parity-time-symmetric optical lattices near the phase-transition point are analytically studied. A novel fourth-order equation is derived for the envelope of these wave packets. A pyramid diffraction pattern is demonstrated in both the linear and nonlinear regimes. Blow-up is also possible in the nonlinear regime for both focusing and defocusing nonlinearities.

  14. Teaching diffraction with hands-on optical spectrometry

    Science.gov (United States)

    Fischer, Robert

    2012-09-01

    Although the observation of optical spectra is common practice in physics classes, students are usually limited to a passive, qualitative observation of nice colours. This paper discusses a diffraction-based spectrometer that allows students to take quantitative measurements of spectral bands. Students can build it within minutes from generic low-cost materials. The spectrometer’s simple, didactic design allows students to fully comprehend the underlying physical concepts and to engage in a discussion of measurement errors and uncertainties.

  15. Optical diffraction of fractal figures: random Sierpinski carpets

    Science.gov (United States)

    Berger, Denise; Chamaly, Stéphane; Perreau, Michel; Mercier, Daniel; Monceau, Pascal; Levy, Jean-Claude Serge

    1991-10-01

    The optical diffraction patterns of random Sierpinski carpets of different fractal dimensions at different levels of iteration are shown and analyzed. The sensitivity of such an analysis to long range correlations, is demonstrated theoretically by means of the transfer matrix formalism of fractals, T.M.F. The relation between the subdimensions defined in T.M.F. and diffraction patterns is outlined. Finally an analysis of experimental diffraction patterns is proposed in order to measure these new theoretical subdimensions. On présente ici les clichés de diffraction optique de tapis de Sierpinski aléatoires de différentes dimensions fractales, pris à des niveaux d'itération différents. Au moyen du formalisme de la matrice de transfert dans les fractals, on montre la sensibilité de cette analyse expérimentale aux corrélations à moyenne et longue portée. Ainsi la relation entre les sous-dimensions fractales du F.M.T. et les rapports d'intensité entre les clichés de diffraction de figures fractales à des niveaux d'itération différents est soulignée. Enfin on esquisse le principe d'une analyse expérimentale de ces nouvelles dimensions théoriques.

  16. Optical properties of X-rays--dynamical diffraction.

    Science.gov (United States)

    Authier, André

    2012-01-01

    The first attempts at measuring the optical properties of X-rays such as refraction, reflection and diffraction are described. The main ideas forming the basis of Ewald's thesis in 1912 are then summarized. The first extension of Ewald's thesis to the X-ray case is the introduction of the reciprocal lattice. In the next step, the principles of the three versions of the dynamical theory of diffraction, by Darwin, Ewald and Laue, are given. It is shown how the comparison of the dynamical and geometrical theories of diffraction led Darwin to propose his extinction theory. The main optical properties of X-ray wavefields at the Bragg incidence are then reviewed: Pendellösung, shift of the Bragg peak, fine structure of Kossel lines, standing waves, anomalous absorption, paths of wavefields inside the crystal, Borrmann fan and double refraction. Lastly, some of the modern applications of the dynamical theory are briefly outlined: X-ray topography, location of adsorbed atoms at crystal surfaces, optical devices for synchrotron radiation and X-ray interferometry.

  17. Optical system design with conformal decentered and tilted elements

    Institute of Scientific and Technical Information of China (English)

    Jun Chang; Wubin He; Ruirui Wang; Shulong Feng

    2011-01-01

    @@ We investigate the aberration properties of the conformal optical system with decentered and tilted elements by vector aberration theory.By decentering and tilting the window and corrector of the system,two elements are effectively used together in a particular manner by aberration compensation to achieve off-axis imaging.A conceptual design is performed with a half-field of 2°, the F# of 4, and the wavelength ranging of 3700-4800 nm.The imaging quality can reach the optical diffraction limit and satisfy corresponding requirements.%We investigate the aberration properties of the conformal optical system with decentered and tilted elements by vector aberration theory.By decentering and tilting the window and corrector of the system,two elements are effectively used together in a particular manner by aberration compensation to achieve off-axis imaging.A conceptual design is performed with a half-field of 2°, the F# of 4, and the wavelength ranging of 3700-4800 nm.The imaging quality can reach the optical diffraction limit and satisfy corresponding requirements.

  18. Advanced simulations of optical transition and diffraction radiation

    Directory of Open Access Journals (Sweden)

    T. Aumeyr

    2015-04-01

    Full Text Available Charged particle beam diagnostics is a key task in modern and future accelerator installations. The diagnostic tools are practically the “eyes” of the operators. The precision and resolution of the diagnostic equipment are crucial to define the performance of the accelerator. Transition and diffraction radiation (TR and DR are widely used for electron beam parameter monitoring. However, the precision and resolution of those devices are determined by how well the production, transport and detection of these radiation types are understood. This paper reports on simulations of TR and DR spatial-spectral characteristics using the physical optics propagation (POP mode of the Zemax advanced optics simulation software. A good consistency with theory is demonstrated. Also, realistic optical system alignment issues are discussed.

  19. LINC-NIRVANA: cryogenic optics for diffraction limited beam combination

    Science.gov (United States)

    Bizenberger, Peter; Baumeister, Harald; Herbst, Tom; Zhang, Xianyu

    2012-09-01

    LINC-NIRVANA is an interferometric imaging camera, which combines the two 8.4 m telescopes of the Large Binocular Telescope (LBT). The instrument operates in the wavelength range from 1.1 μm to 2.4 μm, covering the J, H and K-band, respectively. The beam combining camera (NIRCS) offers the possibility to achieve diffraction limited images with the special resolution of a 23 m telescope. The optics are designed to deliver a 10 arcsec × 10 arcsec field of view with 5 mas resolution. In this paper we describe the evolution of the cryogenic optics, from design and manufacturing to verification. Including the argumentation for decisions we made in order to present a sort of guideline for large cryo-optics. We also present the alignment and testing strategies at a detailed level.

  20. Diffractive-optics-based beam combination of a phase-locked fiber laser array.

    Science.gov (United States)

    Cheung, Eric C; Ho, James G; Goodno, Gregory D; Rice, Robert R; Rothenberg, Josh; Thielen, Peter; Weber, Mark; Wickham, Michael

    2008-02-15

    A diffractive optical element (DOE) is used as a beam combiner for an actively phase-locked array of fiber lasers. Use of a DOE eliminates the far-field sidelobes and the accompanying loss of beam quality typically observed in tiled coherent laser arrays. Using this technique, we demonstrated coherent combination of five fiber lasers with 91% efficiency and M2=1.04. Combination efficiency and phase locking is robust even with large amplitude and phase fluctuations on the input laser array elements. Calculations and power handling measurements suggest that this approach can scale to both high channel counts and high powers.

  1. Localizer with high occlusion immunity using diffraction optics

    Science.gov (United States)

    Ditto, Thomas D.; Farges, Jacques

    2004-10-01

    The chromatic method of diffraction range finding can be exploited to construct a 3D localizer that tracks the position of a pointer, a 3-D scanner or a robotic end-effecter. A spectrogram is made using a diffraction grating as the primary objective of an optical system that tracks a broad band emitter such as a tungsten filament or white L.E.D. Image processing on the resulting spectra transforms the spectrogram at the input to distance and displacement at the output. The behavior conforms to geometric optics following the Diffraction Equation. This novel technique has unique features. For example, the number of samples increases with target distance, reversing the loss of resolution as a function of distance that is endemic to triangulation. The plurality of samples also can overcome occlusion liability common to time-of-flight range finders, since multiple paths exist between emitter and sensor. The grating can be made from inexpensive embossed plastic, and a wave length sensor can be constructed from garden variety color cameras. The method is robust at a grazing exodus angles that allow for a compact configuration of the receiver. In this paper we disclose the theory of operation including a mathematical model, and we demonstrate the method empirically.

  2. Nonintercepting electron beam size monitor using optical diffraction radiation interference

    Directory of Open Access Journals (Sweden)

    A. Cianchi

    2011-10-01

    Full Text Available In recent years, the use of diffraction radiation (DR, emitted when a charged particle beam passes through a rectangular slit, has been proposed and successfully tested as a nonintercepting diagnostic of high brightness beams. However, some problems related to the control of the particle trajectory through the slit still remain. If an additional slit is placed in front of the first one, at a distance shorter than the radiation formation length, interference between the forward diffraction radiation from the upstream slit and the backward diffraction radiation from the downstream slit can be observed. In this paper we report the first experimental observation of this effect, which we call here optical diffraction radiation interference (ODRI. If the two slits have different dimensions and are not aligned on the same axis, the properties of the ODRI pattern can be effectively used for nonintercepting beam diagnostics, especially for the unambiguously determination of the beam size. Indeed, the advantage of ODRI compared with a single aperture DR screen is due to the reduction of synchrotron radiation background, the increase of sensitivity for transverse beam dimensions, and the possibility to separate effects caused by the beam size and by beam offset within the slit.

  3. LINC-NIRVANA: Diffraction limited optics in cryogenic environment

    Science.gov (United States)

    Bizenberger, Peter; Baumeister, Harald; Fopp, Patrick; Herbst, Tom; Laun, Werner; Mohr, Lars; Moreno-Ventas, Javier

    2014-07-01

    LINC-NIRVANA is an instrument combining the two 8.4 m telescopes of the Large Binocular Telescope (LBT) coherently, in order to achieve the optical resolution of the 23 meter baseline. For this interferometric instrument concept, the common beam combination requires diffraction limited optical performance. The optics, realized as a Cassegrain telescope design, consists of aluminum mirrors, designed and manufactured to fulfill the challenging specifications required for interferometric imaging. Due to the science wavelength range from 1 μm to 2.4 μm, covering the J, H and K band of the atmosphere, the complete beam combiner including the optics is operated in cryogenic environment at 60 Kelvin. Here, we demonstrate the verification of the optical performance at this temperature for classical in-coherent and coherent illumination. We outline the test setup and present the achieved results of wavefront error for the individual beams and fringe contrast for the interferometric point spread function. This paper continues the already presented integration of the interferometric camera with the focus on the performance of the cryogenic optics.

  4. Single-pulse x-ray diffraction using polycapillary optics for in situ dynamic diffraction.

    Science.gov (United States)

    Maddox, B R; Akin, M C; Teruya, A; Hunt, D; Hahn, D; Cradick, J; Morgan, D V

    2016-08-01

    Diagnostic use of single-pulse x-ray diffraction (XRD) at pulsed power facilities can be challenging due to factors such as the high flux and brightness requirements for diffraction and the geometric constraints of experimental platforms. By necessity, the x-ray source is usually positioned very close, within a few inches of the sample. On dynamic compression platforms, this puts the x-ray source in the debris field. We coupled x-ray polycapillary optics to a single-shot needle-and-washer x-ray diode source using a laser-based alignment scheme to obtain high-quality x-ray diffraction using a single 16 ns x-ray pulse with the source >1 m from the sample. The system was tested on a Mo sample in reflection geometry using 17 keV x-rays from a Mo anode. We also identified an anode conditioning effect that increased the x-ray intensity by 180%. Quantitative measurements of the x-ray focal spot produced by the polycapillary yielded a total x-ray flux on the sample of 3.3 ± 0.5 × 10(7) molybdenum Kα photons.

  5. Transition from two-dimensional photonic crystals to dielectric metasurfaces in the optical diffraction with a fine structure.

    Science.gov (United States)

    Rybin, Mikhail V; Samusev, Kirill B; Lukashenko, Stanislav Yu; Kivshar, Yuri S; Limonov, Mikhail F

    2016-08-05

    We study experimentally a fine structure of the optical Laue diffraction from two-dimensional periodic photonic lattices. The periodic photonic lattices with the C4v square symmetry, orthogonal C2v symmetry, and hexagonal C6v symmetry are composed of submicron dielectric elements fabricated by the direct laser writing technique. We observe surprisingly strong optical diffraction from a finite number of elements that provides an excellent tool to determine not only the symmetry but also exact number of particles in the finite-length structure and the sample shape. Using different samples with orthogonal C2v symmetry and varying the lattice spacing, we observe experimentally a transition between the regime of multi-order diffraction, being typical for photonic crystals to the regime where only the zero-order diffraction can be observed, being is a clear fingerprint of dielectric metasurfaces characterized by effective parameters.

  6. Transition from two-dimensional photonic crystals to dielectric metasurfaces in the optical diffraction with a fine structure

    Science.gov (United States)

    Rybin, Mikhail V.; Samusev, Kirill B.; Lukashenko, Stanislav Yu.; Kivshar, Yuri S.; Limonov, Mikhail F.

    2016-08-01

    We study experimentally a fine structure of the optical Laue diffraction from two-dimensional periodic photonic lattices. The periodic photonic lattices with the C4v square symmetry, orthogonal C2v symmetry, and hexagonal C6v symmetry are composed of submicron dielectric elements fabricated by the direct laser writing technique. We observe surprisingly strong optical diffraction from a finite number of elements that provides an excellent tool to determine not only the symmetry but also exact number of particles in the finite-length structure and the sample shape. Using different samples with orthogonal C2v symmetry and varying the lattice spacing, we observe experimentally a transition between the regime of multi-order diffraction, being typical for photonic crystals to the regime where only the zero-order diffraction can be observed, being is a clear fingerprint of dielectric metasurfaces characterized by effective parameters.

  7. Application of binary optical element to infrared hyperspectral detection

    Institute of Scientific and Technical Information of China (English)

    SUN; Qiang(孙强); YU; Bin(于斌); LIU; Yuling(刘玉玲); LU; Zhenwu(卢振武); CHEN; Bo(陈波); WANG; Zhaoqi(王肇圻); MU; Guoguang(母国光)

    2003-01-01

    Binary optical element (BOE) is applied to infrared hyperspectral detector. A new type of infrared hyperspectral detecting image system is designed based on the characteristics of abundant color-dispersion of BOE, and an example of combining refractive-diffractive zoom optical system with Cassegrain system is presented. The system not only has simple structure, long back-working distance and few requirements for material but also can increase the image resolution, abilities of accepting ray energy and registration. Consequently, by adding an appropriate stare array detector to the system, the detecting precision can be raised.

  8. Optical diffraction tomography techniques for the study of cell pathophysiology

    CERN Document Server

    Kim, Kyoohyun; Shin, Seungwoo; Lee, SangYun; Yang, Su-A; Park, YongKeun

    2016-01-01

    Three-dimensional imaging of biological cells is crucial for the investigation of cell biology, provide valuable information to reveal the mechanisms behind pathophysiology of cells and tissues. Recent advances in optical diffraction tomography (ODT) have demonstrated the potential for the study of various cells with its unique advantages of quantitative and label-free imaging capability. To provide insight on this rapidly growing field of research and to discuss its applications in biology and medicine, we present the summary of the ODT principle and highlight recent studies utilizing ODT with the emphasis on the applications to the pathophysiology of cells.

  9. Use of rigorous vector coupled-wave theory for designing and tolerancing surface-relief diffractive components for magneto-optical heads

    Science.gov (United States)

    Haggans, Charles W.; Kostuk, Raymond K.

    1991-01-01

    A rigorous coupled wave model is presented, experimentally validated, and used for tolerancing surface relief diffractive elements. Applications of the model in the design and tolerancing of components for magneto optical (M-O) data storage heads are investigated.

  10. Holographic optical elements recorded in silver halide sensitized gelatin emulsions. Part 2. Reflection holographic optical elements.

    Science.gov (United States)

    Kim, Jong Man; Choi, Byung So; Choi, Yoon Sun; Kim, Jong Min; Bjelkhagen, Hans I; Phillips, Nicholas J

    2002-03-10

    Silver halide sensitized gelatin (SHSG) holograms are similar to holograms recorded in dichromated gelatin (DCG), the main recording material for holographic optical elements (HOEs). The drawback of DCG is its low energetic sensitivity and limited spectral response. Silver halide materials can be processed in such away that the final hologram will have properties like a DCG hologram. Recently this technique has become more interesting since the introduction of new ultra-fine-grain silver halide (AgHal) emulsions. In particular, high spatial-frequency fringes associated with HOEs of the reflection type are difficult to construct when SHSG processing methods are employed. Therefore an optimized processing technique for reflection HOEs recorded in the new AgHal materials is introduced. Diffraction efficiencies over 90% can be obtained repeatably for reflection diffraction gratings. Understanding the importance of a selective hardening process has made it possible to obtain results similar to conventional DCG processing. The main advantage of the SHSG process is that high-sensitivity recording can be performed with laser wavelengths anywhere within the visible spectrum. This simplifies the manufacturing of high-quality, large-format HOEs, also including high-quality display holograms of the reflection type in both monochrome and full color.

  11. Microbial Diffraction Gratings as Optical Detectors for Heavy Metal Pollutants

    Science.gov (United States)

    Noever, David; Matsos, Helen; Brittain, Andrew; Obenhuber, Don; Cronise, Raymond; Armstrong, Shannon

    1996-01-01

    As a significant industrial pollutant, cadmium is implicated as the cause of itai-itai disease. For biological detection of cadmium toxicity, an assay device has been developed using the motile response of the protozoa species, Tetrahymena pyriformis. This mobile protozoa measures 50 microns in diameter, swims at 10 body lengths per second, and aggregates into macroscopically visible patterns at high organism concentrations. The assay demonstrates a Cd(+2) sensitivity better than 1 micro-M and a toxicity threshold to 5 micro-M, thus encouraging the study of these microbial cultures as viable pollution detectors. Using two-dimensional diffraction patterns within a Tetrahymena culture, the scattered light intensity varies with different organism densities (population counts). The resulting density profile correlates strongly with the toxic effects at very low dosages for cadmium (less than 5 ppm) and then for poison protection directly (with nickel and copper antagonists competing with cadmium absorption). In particular, copper dosages as low as 0.1-0.5 mM Cu have shown protective antagonism against cadmium, have enhanced density variability for cultures containing 1 mM Cd(+2) and therefore have demonstrated the sensitivity of the optical detection system. In this way, such microbial diffraction patterns give a responsive optical measure of biological culture changes and toxicity determination in aqueous samples of heavy metals and industrial pollutants.

  12. Spin-to-orbit conversion at acousto-optic diffraction of light: conservation of optical angular momentum.

    Science.gov (United States)

    Skab, Ihor; Vlokh, Rostyslav

    2012-04-01

    Acousto-optic diffraction of light in optically active cubic crystals is analyzed from the viewpoint of conservation of optical angular momentum. It is shown that the availability of angular momentum in the diffracted optical beam can be necessarily inferred from the requirements of angular momentum conservation law. As follows from our analysis, a circularly polarized diffracted wave should bear an orbital angular momentum. The efficiency of the spin-to-orbit momentum conversion is governed by the efficiency of acousto-optic diffraction.

  13. Blazed Grating Resonance Conditions and Diffraction Efficiency Optical Transfer Function

    KAUST Repository

    Stegenburgs, Edgars

    2017-01-08

    We introduce a general approach to study diffraction harmonics or resonances and resonance conditions for blazed reflecting gratings providing knowledge of fundamental diffraction pattern and qualitative understanding of predicting parameters for the most efficient diffraction.

  14. Diffractive optics development using a modified stack-and-draw technique.

    Science.gov (United States)

    Pniewski, Jacek; Kasztelanic, Rafal; Nowosielski, Jedrzej M; Filipkowski, Adam; Piechal, Bernard; Waddie, Andrew J; Pysz, Dariusz; Kujawa, Ireneusz; Stepien, Ryszard; Taghizadeh, Mohammad R; Buczynski, Ryszard

    2016-06-20

    We present a novel method for the development of diffractive optical elements (DOEs). Unlike standard surface relief DOEs, the phase shift is introduced through a refractive index variation achieved by using different types of glass. For the fabrication of DOEs we use a modified stack-and-draw technique, originally developed for the fabrication of photonic crystal fibers, resulting in a completely flat element that is easy to integrate with other optical components. A proof-of-concept demonstration of the method is presented-a two-dimensional binary optical phase grating in the form of a square chessboard with a pixel size of 5 μm. Two types of glass are used: low refractive index silicate glass NC21 and high refractive index lead-silicate glass F2. The measured diffraction characteristics of the fabricated component are presented and it is shown numerically and experimentally that such a DOE can be used as a fiber interconnector that couples light from a small-core fiber into the several cores of a multicore fiber.

  15. Diffraction-based optical sensor detection system for capture-restricted environments

    Science.gov (United States)

    Khandekar, Rahul M.; Nikulin, Vladimir V.

    2008-04-01

    The use of digital cameras and camcorders in prohibited areas presents a growing problem. Piracy in the movie theaters results in huge revenue loss to the motion picture industry every year, but still image and video capture may present even a bigger threat if performed in high-security locations. While several attempts are being made to address this issue, an effective solution is yet to be found. We propose to approach this problem using a very commonly observed optical phenomenon. Cameras and camcorders use CCD and CMOS sensors, which include a number of photosensitive elements/pixels arranged in a certain fashion. Those are photosites in CCD sensors and semiconductor elements in CMOS sensors. They are known to reflect a small fraction of incident light, but could also act as a diffraction grating, resulting in the optical response that could be utilized to identify the presence of such a sensor. A laser-based detection system is proposed that accounts for the elements in the optical train of the camera, as well as the eye-safety of the people who could be exposed to optical beam radiation. This paper presents preliminary experimental data, as well as the proof-of-concept simulation results.

  16. Photon Sieve Bandwidth Broadening by Reduction of Chromatic Aberration Effects Using Second-Stage Diffractive Optics

    Science.gov (United States)

    2015-03-26

    Large optical photon sieve,” Optics Letters , 30(22): 2976-2978 (November 2005). 2. Andersen, Geoff. Senior Researcher, Laser and Optics ...EFFECTS USING SECOND-STAGE DIFFRACTIVE OPTICS THESIS Presented to the Faculty Department of Engineering Physics Graduate School of Engineering...SECOND-STAGE DIFFRACTIVE OPTICS Christopher M. Tulip Major, USAF Committee Membership: Lt Col Anthony L. Franz, PhD Chair

  17. Advances in thin film diffraction instrumentation by X-ray optics

    Energy Technology Data Exchange (ETDEWEB)

    Haase, A. [Rich. Seifert and Co., Analytical X-ray Systems, Ahrensburg (Germany)

    1996-09-01

    The structural characterisation of thin films requires a parallel X-ray beam of high intensity. Parallel beam geometry is commonly used in high resolution and single crystal experiments, but also in the field of X-ray diffraction for polycrystalline material (e.g. in phase, texture and stress analysis). For grazing incidence diffraction (GID), the use of small slits on the primary side and of long soller slits with a flat monochromator on the secondary side is standard. New optical elements have been introduced with polychromatic or monochromatic radiation. By means of different applications the results are compared with those of classical beam optics. X-ray fiber optics utilize total external reflection of X-rays on smooth surfaces. Effects of monochromatization are presented. In many fields of application, fiber optics may replace conventional collimators. The use of primary and secondary channel cut crystals can also produce a high parallel monochromatic X-ray beam. A parabolically bent graded multilayer produces a monochromatic parallel beam of high intensity. Compared with classical Bragg-Brentano (focussing) geometry, excellent results have been obtained, especially for samples with an irregular shape. In combination with a channel cut monochromator there is a substantial gain in intensity leading to an increase of the dynamic intensity range of rocking curves.

  18. Large-scale optical diffraction tomography for inspection of optical plastic lenses

    CERN Document Server

    Kim, Kyoohyun; Park, YongKeun

    2015-01-01

    Herein is presented an optical diffraction tomography (ODT) technique for measuring 3-D refractive index (RI) maps of optical plastic lenses. A Mach-Zehnder interferometer was used to measure multiple complex optical fields of a plastic lens immersed in RI matching oil, at various rotational orientations. From this, ODT was used to reconstruct a 3-D RI distribution of the plastic lens with unprecedented RI sensitivity (dn = 4.21 x 10^-5) and high resolution (12.8 um). As a demonstration, 3-D RI distributions of a 2-mm-diameter borosilicate sphere and a 5-mm-diameter plastic lens

  19. Optical refractometry based on Fresnel diffraction from a phase wedge.

    Science.gov (United States)

    Tavassoly, M Taghi; Saber, Ahad

    2010-11-01

    A method that utilizes the Fresnel diffraction of light from the phase step formed by a transparent wedge is introduced for measuring the refractive indices of transparent solids, liquids, and solutions. It is shown that, as a transparent wedge of small apex angle is illuminated perpendicular to its surface by a monochromatic parallel beam of light, the Fresnel fringes, caused by abrupt change in refractive index at the wedge lateral boundary, are formed on a screen held perpendicular to the beam propagation direction. The visibility of the fringes varies periodically between zero and 1 in the direction normal to the wedge apex. For a known or measured apex angle, the wedge refractive index is obtained by measuring the period length by a CCD. To measure the refractive index of a transparent liquid or solution, the wedge is installed in a transparent rectangle cell containing the sample. Then, the cell is illuminated perpendicularly and the visibility period is measured. By using modest optics, one can measure the refractive index at a relative uncertainty level of 10(-5). There is no limitation on the refractive index range. The method can be applied easily with no mechanical manipulation. The measuring apparatus can be very compact with low mechanical and optical noises.

  20. Ultra-high accuracy optical testing: creating diffraction-limitedshort-wavelength optical systems

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, Kenneth A.; Naulleau, Patrick P.; Rekawa, Senajith B.; Denham, Paul E.; Liddle, J. Alexander; Gullikson, Eric M.; Jackson, KeithH.; Anderson, Erik H.; Taylor, John S.; Sommargren, Gary E.; Chapman,Henry N.; Phillion, Donald W.; Johnson, Michael; Barty, Anton; Soufli,Regina; Spiller, Eberhard A.; Walton, Christopher C.; Bajt, Sasa

    2005-08-03

    Since 1993, research in the fabrication of extreme ultraviolet (EUV) optical imaging systems, conducted at Lawrence Berkeley National Laboratory (LBNL) and Lawrence Livermore National Laboratory (LLNL), has produced the highest resolution optical systems ever made. We have pioneered the development of ultra-high-accuracy optical testing and alignment methods, working at extreme ultraviolet wavelengths, and pushing wavefront-measuring interferometry into the 2-20-nm wavelength range (60-600 eV). These coherent measurement techniques, including lateral shearing interferometry and phase-shifting point-diffraction interferometry (PS/PDI) have achieved RMS wavefront measurement accuracies of 0.5-1-{angstrom} and better for primary aberration terms, enabling the creation of diffraction-limited EUV optics. The measurement accuracy is established using careful null-testing procedures, and has been verified repeatedly through high-resolution imaging. We believe these methods are broadly applicable to the advancement of short-wavelength optical systems including space telescopes, microscope objectives, projection lenses, synchrotron beamline optics, diffractive and holographic optics, and more. Measurements have been performed on a tunable undulator beamline at LBNL's Advanced Light Source (ALS), optimized for high coherent flux; although many of these techniques should be adaptable to alternative ultraviolet, EUV, and soft x-ray light sources. To date, we have measured nine prototype all-reflective EUV optical systems with NA values between 0.08 and 0.30 (f/6.25 to f/1.67). These projection-imaging lenses were created for the semiconductor industry's advanced research in EUV photolithography, a technology slated for introduction in 2009-13. This paper reviews the methods used and our program's accomplishments to date.

  1. Finite element analysis of optical waveguides

    Science.gov (United States)

    Mabaya, N.; Lagasse, P. E.; Vandenbulcke, P.

    1981-06-01

    Several finite element programs for the computation of the guided modes of optical waveguides are presented. The advantages and limitations of a very general program for the analysis of anisotropic guides are presented. A possible solution to the problem of the spurious numerical modes, encountered when calculating higher order modes, is proposed. For isotropic waveguides, it is shown that both EH- and HE-type modes can be very accurately approximated by two different scalar finite element programs. Finally, a boundary perturbation method is outlined that makes it possible to calculate the attenuation coefficient of leaky modes in single material guides, starting from a finite element calculation.

  2. Aberration coefficients of curved holographic optical elements

    Science.gov (United States)

    Verboven, P. E.; Lagasse, P. E.

    1986-11-01

    A general formula is derived that gives all aberration terms of holographic optical elements on substrates of any shape. The spherical substrate shape and the planar substrate shape are treated as important special cases. A numerical example illustrates the need of including higher-order aberrations.

  3. Method and system for processing optical elements using magnetorheological finishing

    Science.gov (United States)

    Menapace, Joseph Arthur; Schaffers, Kathleen Irene; Bayramian, Andrew James; Molander, William A

    2012-09-18

    A method of finishing an optical element includes mounting the optical element in an optical mount having a plurality of fiducials overlapping with the optical element and obtaining a first metrology map for the optical element and the plurality of fiducials. The method also includes obtaining a second metrology map for the optical element without the plurality of fiducials, forming a difference map between the first metrology map and the second metrology map, and aligning the first metrology map and the second metrology map. The method further includes placing mathematical fiducials onto the second metrology map using the difference map to form a third metrology map and associating the third metrology map to the optical element. Moreover, the method includes mounting the optical element in the fixture in an MRF tool, positioning the optical element in the fixture; removing the plurality of fiducials, and finishing the optical element.

  4. Bragg diffraction from sub-micron particles isolated by optical tweezers

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Yuan, E-mail: ygao0709@anl.gov; Harder, Ross; Southworth, Stephen; Guest, Jeffrey; Ocola, Leonidas; Young, Linda [Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439 (United States); Scherer, Norbert; Yan, Zijie [Department of Chemistry, University of Chicago, Chicago, IL 60637 (United States); Pelton, Matthew [Department of Physics, University of Maryland, Baltimore County, MD 21250 (United States)

    2016-07-27

    We describe an apparatus using dynamic holographic optical tweezers which is capable of trapping and aligning a single micron scale anisotropic ZnO particle for x-ray Bragg diffraction experiments. The optical tweezers demonstrate enough stability to perform coherent x-ray diffraction imaging.

  5. Analysis of the role of diffraction in topographic site effects using boundary element techniques

    Science.gov (United States)

    Gomez, Juan; Restrepo, Doriam; Jaramillo, Juan; Valencia, Camilo

    2013-10-01

    The role played by the diffraction field on the problem of seismic site effects is studied. For that purpose we solve and analyze simple scattering problems under P and SV in-plane wave assumptions, using two well known direct boundary-element-based numerical methods. After establishing the difference between scattered and diffracted motions, and introducing the concept of artificious and physically based incoming fields, we obtain the amplitude of the Fourier spectra for the diffracted part of the response: this is achieved after establishing the connection between the spatial distribution of the transfer function over the studied simple topographies and the diffracted field. From the numerical simulations it is observed that this diffracted part of the response is responsible for the amplification of the surface ground motions due to the geometric effect. Furthermore, it is also found that the diffraction field sets in a fingerprint of the topographic effect in the total ground motions. These conclusions are further supported by observations in the time-domain in terms of snapshots of the propagation patterns over the complete computational model. In this sense the geometric singularities are clearly identified as sources of diffraction and for the considered range of dimensionless frequencies it is evident that larger amplifications are obtained for the geometries containing a larger number of diffraction sources thus resulting in a stronger topographic effect. The need for closed-form solutions of canonical problems to construct a robust analysis method based on the diffraction field is identified.

  6. Diffraction leveraged modulation of X-ray pulses using MEMS-based X-ray optics

    Science.gov (United States)

    Lopez, Daniel; Shenoy, Gopal; Wang, Jin; Walko, Donald A.; Jung, Il-Woong; Mukhopadhyay, Deepkishore

    2016-08-09

    A method and apparatus are provided for implementing Bragg-diffraction leveraged modulation of X-ray pulses using MicroElectroMechanical systems (MEMS) based diffractive optics. An oscillating crystalline MEMS device generates a controllable time-window for diffraction of the incident X-ray radiation. The Bragg-diffraction leveraged modulation of X-ray pulses includes isolating a particular pulse, spatially separating individual pulses, and spreading a single pulse from an X-ray pulse-train.

  7. Diffractive optics for reduction of hot cracking in pulsed mode Nd:YAG laser welding

    DEFF Research Database (Denmark)

    Bagger, Claus; Olesen, Søren; Roos, Sven-Olov

    2001-01-01

    In order to reduce the susceptibility to hot cracking in pulsed mode laser welding of austenitic stainless steel, an optical system for reduction of the cooling rate is sought developed. Based on intensive numerical simulations, an optical system producing three focused spots is made. In a number...... of systematic tests, the applicability of this system is tested on an industrial 1 kW Nd:YAG laser. Three separate series of tests are conducted, one with the diffractive optical system at 500 W and two without the diffractive system at 400 W and 500 W, respectively. In principle the diffractive, optical system...

  8. Design of nanophotonic elements with transformation optics

    Science.gov (United States)

    Ginis, Vincent; Tassin, Philippe; Danckaert, Jan; Soukoulis, Costas M.; Veretennicoff, Irina

    2012-10-01

    In this contribution we show that the fundamental diffraction limit of optical cavities can be overcome using a transformation-optical approach. Transformation optics has recently provided a new method for the design of devices to control electromagnetic fields, based on the analogy between the macroscopic Maxwell's equations in complex dielectrics and the free-space Maxwell's equations in a curved coordinate system. It offers an elegant approach to exploit the full potential of metamaterials. We show how transformation optics can be used to achieve the opposite e ect of an invisibility cloak; instead of prohibiting the electromagnetic waves from entering a predefi ned region, we encapsulate the light waves within such a finite region. This allows us to design cavities with extraordinary properties. We have been able to demonstrate theoretically the existence of eigenmodes whose wavelength is much larger than the characteristic dimensions of the device. Furthermore, our cavities avoid the bending losses observed in traditional microcavities, so the quality factor is only limited by the intrinsic absorption of the materials. Finally, we also demonstrate how the combination of radial and angular transformations allows developing cavities without bending losses using right-handed material parameters only.1, 2

  9. 3D optical vortices generated by micro-optical elements and its novel applications

    Institute of Scientific and Technical Information of China (English)

    BU J.; LIN J.; K. J. Moh; B. P. S. Ahluwalia; CHEN H. L.; PENG X.; NIU H. B.; YUAN X.C.

    2007-01-01

    In this paper we report on recent development in the areas of optical vortices generated by micro-optical elements and applications of optical vortices, including optical manipulation, radial polarization and secure free space optical communication

  10. Optical devices combining an organic semiconductor crystal with a two-dimensional inorganic diffraction grating

    Energy Technology Data Exchange (ETDEWEB)

    Kitazawa, Takenori; Yamao, Takeshi, E-mail: yamao@kit.ac.jp; Hotta, Shu [Faculty of Materials Science and Engineering, Kyoto Institute of Technology, Kyoto 606-8585 (Japan)

    2016-02-01

    We have fabricated optical devices using an organic semiconductor crystal as an emission layer in combination with a two-dimensional (2D) inorganic diffraction grating used as an optical cavity. We formed the inorganic diffraction grating by wet etching of aluminum-doped zinc oxide (AZO) under a 2D cyclic olefin copolymer (COC) diffraction grating used as a mask. The COC diffraction grating was fabricated by nanoimprint lithography. The AZO diffraction grating was composed of convex prominences arranged in a triangular lattice. The organic crystal placed on the AZO diffraction grating indicated narrowed peaks in its emission spectrum under ultraviolet light excitation. These are detected parallel to the crystal plane. The peaks were shifted by rotating the optical devices around the normal to the crystal plane, which reflected the rotational symmetries of the triangular lattice through 60°.

  11. Polishing techniques for MEGARA pupil elements optics

    Science.gov (United States)

    Izazaga, R.; Carrasco, E.; Aguirre, D.; Salas, A.; Gil de Paz, A.; Gallego, J.; Iglesias, J.; Arroyo, J. M.; Hernández, M.; López, N.; López, V.; Quechol, J. T.; Salazar, M. F.; Carballo, C.; Cruz, E.; Arriaga, J.; De la Luz, J. A.; Huepa, A.; Jaimes, G. L.; Reyes, J.

    2016-07-01

    MEGARA (Multi-Espectrógrafo en GTC de Alta Resolución para Astronomía) is the new integral-field and multi-object optical spectrograph for the 10.4m Gran Telescopio Canarias.. It will offer RFWHM 6,000, 12,000 and 18,700 for the low- , mid- and high-resolution, respectively in the wavelength range 3650-9700Å. .The dispersive elements are volume phase holographic (VPH) gratings, sandwiched between two flat Fused Silica windows of high optical precision in large apertures. The design, based in VPHs in combination with Ohara PBM2Y prisms allows to keep the collimator and camera angle fixed. Seventy three optical elements are being built in Mexico at INAOE and CIO. For the low resolution modes, the VPHs windows specifications in irregularity is 1 fringe in 210mm x 170mm and 0.5 fringe in 190mm x 160mm. for a window thickness of 25 mm. For the medium and high resolution modes the irregularity specification is 2 fringes in 220mm x 180mm and 1 fringe in 205mm x 160mm, for a window thickness of 20mm. In this work we present a description of the polishing techniques developed at INAOE optical workshop to fabricate the 36 Fused Silica windows and 24 PBM2Y prisms that allows us to achieve such demanding specifications. We include the processes of mounting, cutting, blocking, polishing and testing.

  12. Diffractive Interface Theory: Nonlocal polarizability approach to the optics of metasurfaces

    CERN Document Server

    Roberts, Christopher M; Podolskiy, Viktor A

    2014-01-01

    We present a formalism for understanding the elecromagnetism of metasurfaces, optically thin composite films with engineered diffraction. The technique, diffractive interface theory (DIT), takes explicit advantage of the small optical thickness of a metasurface, eliminating the need for solving for light propagation inside the film and providing a direct link between the spatial profile of a metasurface and its diffractive properties. Predictions of DIT are compared with full-wave numerical solutions of Maxwell's equations, demonstrating DIT's validity and computational advantages for optically thin structures. Applications of the DIT range from understanding of fundamentals of light-matter interaction in metasurfaces to efficient analysis of generalized refraction to metasurface optimization.

  13. Diffractive interface theory: nonlocal susceptibility approach to the optics of metasurfaces.

    Science.gov (United States)

    Roberts, Christopher M; Inampudi, Sandeep; Podolskiy, Viktor A

    2015-02-09

    We present a formalism for understanding the electromagnetism of metasurfaces, optically thin composite films with engineered diffraction. The technique, diffractive interface theory (DIT), takes explicit advantage of the small optical thickness of a metasurface, eliminating the need for solving for light propagation inside the film and providing a direct link between the spatial profile of a metasurface and its diffractive properties. Predictions of DIT are compared with full-wave numerical solutions of Maxwell's equations, demonstrating DIT's validity and computational advantages for optically thin structures. Applications of the DIT range from understanding of fundamentals of light-matter interaction in metasurfaces to efficient analysis of generalized refraction to metasurface optimization.

  14. Multifrequency Magneto-optic Bragg Diffraction and Radio Frequency Signal Parallel Processing

    Institute of Scientific and Technical Information of China (English)

    SHANG Dan; WU Bao-jian; QIU Kun

    2008-01-01

    Magneto-optic(MO) coupling of guided optical waves with microwave magnetostatic waves(MSWs) simultaneously excited by multiple radio frequency(RF) signals can lead to multifrequency diffraction effects and then parallel processing of RF signals can be realized by using of the characteristics that diffraction efficiencies(Des) are approximately in direct proportion to RF signals intensities and diffraction angles are related to frequencies of the corresponding RF signals within linear MO interaction region. In this paper, studied is the multifrequency MO Bragg diffraction in first-order MO interaction approximation, and obtained was the approximate analytical expression for principle diffraction efficiency(PDE). Also, put forward was a parallel imaging method of relative intensity of RF signals based on single-frequency diffraction. By calculation and analysis, it is shown that the relative error is not more than 0.3 dB for the case of three RF signals within the frequency space of 60 MHz.

  15. Optical color-image encryption and synthesis using coherent diffractive imaging in the Fresnel domain.

    Science.gov (United States)

    Chen, Wen; Chen, Xudong; Sheppard, Colin J R

    2012-02-13

    We propose a new method using coherent diffractive imaging for optical color-image encryption and synthesis in the Fresnel domain. An optical multiple-random-phase-mask encryption system is applied, and a strategy based on lateral translations of a phase-only mask is employed during image encryption. For the decryption, an iterative phase retrieval algorithm is applied to extract high-quality decrypted color images from diffraction intensity maps (i.e., ciphertexts). In addition, optical color-image synthesis is also investigated based on coherent diffractive imaging. Numerical results are presented to demonstrate feasibility and effectiveness of the proposed method. Compared with conventional interference methods, coherent diffractive imaging approach may open up a new research perspective or can provide an effective alternative for optical color-image encryption and synthesis.

  16. Review of near-field optics and superlenses for sub-diffraction-limited nano-imaging

    Directory of Open Access Journals (Sweden)

    Wyatt Adams

    2016-10-01

    Full Text Available Near-field optics and superlenses for imaging beyond Abbe’s diffraction limit are reviewed. A comprehensive and contemporary background is given on scanning near-field microscopy and superlensing. Attention is brought to recent research leveraging scanning near-field optical microscopy with superlenses for new nano-imaging capabilities. Future research directions are explored for realizing the goal of low-cost and high-performance sub-diffraction-limited imaging systems.

  17. Laser-triggered high-voltage plasma switching with diffractive optics.

    Science.gov (United States)

    Ekberg, M; Sunesson, A; Bergkvist, M; Gustavsson, A; Isberg, J; Bernhoff, H; Skytt, P; Bengtsson, J; Hård, S; Larsson, M

    2001-06-01

    High-power lasers can be used to induce ionization of gases and thereby enable rapid triggering of electrical discharge devices, potentially faster than any devices based on mechanical or solid-state switching. With diffractive optical elements (DOEs) the laser light can conveniently be directed to positions within the gas so that an electrical discharge between two high-voltage electrodes is triggered reliably and rapidly. Here we report on two different types of DOE used for creating an electrical discharge in pure argon for potential high-voltage applications. One is the diffractive equivalent of a conventional axicon that yields an extended, and continuous, high-intensity focal region between the electrodes. The other is a multiple-focal-distance kinoform--a DOE that is designed to produce a linear array of 20 discrete foci, with high peak intensities, between the electrodes. We show that DOEs enable efficient, rapid switching and may provide increased flexibility in the design of novel electrode configurations.

  18. Diffractive optics for reduction of hot cracking in pulsed mode Nd:YAG laser welding

    DEFF Research Database (Denmark)

    Bagger, Claus; Olesen, Søren; Roos, Sven-Olov;

    2001-01-01

    of systematic tests, the applicability of this system is tested on an industrial 1 kW Nd:YAG laser. Three separate series of tests are conducted, one with the diffractive optical system at 500 W and two without the diffractive system at 400 W and 500 W, respectively. In principle the diffractive, optical system......In order to reduce the susceptibility to hot cracking in pulsed mode laser welding of austenitic stainless steel, an optical system for reduction of the cooling rate is sought developed. Based on intensive numerical simulations, an optical system producing three focused spots is made. In a number...... functions as intended. Three spots are produced with a variable amount of energy between the center spot and two support spots. On average, the penetration depth drops to roughly half of that obtained with standard optics and the seam width increases 30 to 40 percent. The results show that at similar...

  19. Transferring diffractive optics from research to commercial applications: Part I - progress in the patent landscape

    Science.gov (United States)

    Brunner, Robert

    2013-12-01

    In the last 20 years, diffractive optics experienced a strong research interest and was in the center of many development projects in applied optics. To offer a side view for optical engineers, here, we discuss selected, business-related aspects of the current status of the transfer process to bring diffractive optics into commercial products. The contribution is divided into two parts. Here, in part I, we focus on the patent landscape of diffractive optics with a closer look on the temporal development and the distribution over main players. As an important result, currently, new strong patent activities are observed especially in the context of imaging systems. In the second part, the business volumes of selected market segments are discussed.

  20. Multi-wavelength speckle reduction for laser pico-projectors using diffractive optics

    Science.gov (United States)

    Thomas, Weston H.

    Personal electronic devices, such as cell phones and tablets, continue to decrease in size while the number of features and add-ons keep increasing. One particular feature of great interest is an integrated projector system. Laser pico-projectors have been considered, but the technology has not been developed enough to warrant integration. With new advancements in diode technology and MEMS devices, laser-based projection is currently being advanced for pico-projectors. A primary problem encountered when using a pico-projector is coherent interference known as speckle. Laser speckle can lead to eye irritation and headaches after prolonged viewing. Diffractive optical elements known as diffusers have been examined as a means to lower speckle contrast. Diffusers are often rotated to achieve temporal averaging of the spatial phase pattern provided by diffuser surface. While diffusers are unable to completely eliminate speckle, they can be utilized to decrease the resultant contrast to provide a more visually acceptable image. This dissertation measures the reduction in speckle contrast achievable through the use of diffractive diffusers. A theoretical Fourier optics model is used to provide the diffuser's stationary and in-motion performance in terms of the resultant contrast level. Contrast measurements of two diffractive diffusers are calculated theoretically and compared with experimental results. In addition, a novel binary diffuser design based on Hadamard matrices will be presented. Using two static in-line Hadamard diffusers eliminates the need for rotation or vibration of the diffuser for temporal averaging. Two Hadamard diffusers were fabricated and contrast values were subsequently measured, showing good agreement with theory and simulated values. Monochromatic speckle contrast values of 0.40 were achieved using the Hadamard diffusers. Finally, color laser projection devices require the use of red, green, and blue laser sources; therefore, using a

  1. Nanointaglio fabrication of optical lipid multilayer diffraction gratings with applications in biosensing

    Science.gov (United States)

    Lowry, Troy Warren

    The dynamic self-organization of lipids in biological systems is a highly regulated process that enables the compartmentalization of living systems at microscopic and nanoscopic levels. Exploiting the self-organization and innate biofunctionality of lyotropic liquid crystalline phospholipids, a novel nanofabrication process called "nanointaglio" was invented in order to rapidly and scalably integrate lipid nanopatterns onto the surface. The work presented here focuses on using nanointaglio fabricated lipid diffraction micro- and nanopatterns for the development of new sensing and bioactivity studies. The lipids are patterned as diffraction gratings for sensor functionality. The lipid multilayer gratings operate as nanomechanical sensor elements that are capable of transducing molecular binding to fluid lipid multilayers into optical signals in a label free manner due to shape changes in the lipid nanostructures. To demonstrate the label free detection capabilities, lipid nanopatterns are shown to be suitable for the integration of chemically different lipid multilayer gratings into a sensor array capable of distinguishing vapors by means of an optical nose. Sensor arrays composed of six different lipid formulations are integrated onto a surface and their optical response to three different vapors (water, ethanol and acetone) in air as well as pH under water is monitored as a function of time. Principal component analysis of the array response results in distinct clustering, indicating the suitability of the arrays for distinguishing these analytes. Importantly, the nanointaglio process used is capable of producing lipid gratings out of different materials with sufficiently uniform heights for the fabrication of an optical nose. A second main application is demonstrated for the study of membrane binding proteins. Although in vitro methods for assaying the catalytic activity of individual enzymes are well established, quantitative methods for assaying the kinetics of

  2. Pattern formation without diffraction matching in optical parametric oscillators with a metamaterial.

    Science.gov (United States)

    Tassin, Philippe; Van der Sande, Guy; Veretennicoff, Irina; Kockaert, Pascal; Tlidi, Mustapha

    2009-05-25

    We consider a degenerate optical parametric oscillator containing a left-handed material. We show that the inclusion of a left-handed material layer allows for controlling the strength and sign of the diffraction coefficient at either the pump or the signal frequency. Subsequently, we demonstrate the existence of stable dissipative structures without diffraction matching, i.e., without the usual relationship between the diffraction coefficients of the signal and pump fields. Finally, we investigate the size scaling of these light structures with decreasing diffraction strength.

  3. Coupling light into optical fibres near the diffraction limit

    CERN Document Server

    Horton, A J; Horton, Anthony J.; Bland-Hawthorn, Joss

    2006-01-01

    The burgeoning field of astrophotonics explores the interface between astronomy and photonics. Important applications include photonic OH suppression at near-infrared wavelengths, and integrated photonic spectroscopy. These new photonic mechanisms are not well matched to conventional multi-mode fibres and are best fed with single or few-mode fibres. We envisage the largest gains in astrophotonics will come from instruments that operate with single or few-mode fibres in the diffraction limited or near diffraction limited regimes. While astronomical instruments have largely solved the problem of coupling light into multi-mode fibres this is largely unexplored territory for few-mode and single-mode fibres. Here we describe a project to explore this topic in detail, and present initial results on coupling light into single and few-mode fibres at the diffraction limit. We find that fibres with as few as ~5 guided modes have qualitatively different behaviour to single-mode fibres and share a number of the beneficia...

  4. Thermal Weapon Sight (TWS) AN/PAS-13 diffractive optics designed for producibility

    Science.gov (United States)

    Anderson, J. Steven; Chen, Chungte W.; Spande, Robert A.

    1993-01-01

    The Thermal Weapon Sight (TWS) program is a manportable 3-5 micrometer forward-looking-infrared (FLIR) rifle sight. The manportable nature requires that the optics modules be lightweight, low cost and compact while maximizing performance. These objectives were met with diffractive optics. TWS promises to be the first FLIR sensor to incorporate kinoform surfaces in full scale production.

  5. Body-centered cubic dissipative crystal formation in a dispersive and diffractive optical parametric oscillator.

    Science.gov (United States)

    Tlidi, M; Pieroux, D; Mandel, Paul

    2003-09-15

    We show that coupling diffraction and chromatic dispersion lead to body-centered cubic and hexagonally packed cylinders of dissipative optical crystals in a degenerate optical parametric oscillator. The stabilization of these crystals is a direct consequence of the interaction between the modulational and the quasi-neutral modes.

  6. Modal liquid crystal array of optical elements.

    Science.gov (United States)

    Algorri, J F; Love, G D; Urruchi, V

    2013-10-21

    In this study, a novel liquid crystal array based on modal control principle is proposed and demonstrated. The advanced device comprises a six striped electrode structure that forms a configurable 2D matrix of optical elements. A simulation program based on the Frank-Oseen equations and modal control theory has been developed to predict the device electrooptic response, that is, voltage distribution, interference pattern and unwrapped phase. A low-power electronics circuit, that generates complex waveforms, has been built for driving the device. A combined variation of the waveform amplitude and phase has provided a high tuning versatility to the device. Thus, the simulations have demonstrated the generation of a liquid crystal prism array with tunable slope. The proposed device has also been configured as an axicon array. Test measurements have allowed us to demonstrate that electrooptic responses, simulated and empirical, are fairly in agreement.

  7. Optical double-image cryptography based on diffractive imaging with a laterally-translated phase grating.

    Science.gov (United States)

    Chen, Wen; Chen, Xudong; Sheppard, Colin J R

    2011-10-10

    In this paper, we propose a method using structured-illumination-based diffractive imaging with a laterally-translated phase grating for optical double-image cryptography. An optical cryptosystem is designed, and multiple random phase-only masks are placed in the optical path. When a phase grating is laterally translated just before the plaintexts, several diffraction intensity patterns (i.e., ciphertexts) can be correspondingly obtained. During image decryption, an iterative retrieval algorithm is developed to extract plaintexts from the ciphertexts. In addition, security and advantages of the proposed method are analyzed. Feasibility and effectiveness of the proposed method are demonstrated by numerical simulation results.

  8. Optical cryptography topology based on a three-dimensional particle-like distribution and diffractive imaging.

    Science.gov (United States)

    Chen, Wen; Chen, Xudong

    2011-05-01

    In recent years, coherent diffractive imaging has been considered as a promising alternative for information retrieval instead of conventional interference methods. Coherent diffractive imaging using the X-ray light source has opened up a new research perspective for the measurement of non-crystalline and biological specimens, and can achieve unprecedentedly high resolutions. In this paper, we show how a three-dimensional (3D) particle-like distribution and coherent diffractive imaging can be applied for a study of optical cryptography. An optical multiple-random-phase-mask encoding approach is used, and the plaintext is considered as a series of particles distributed in a 3D space. A topology concept is also introduced into the proposed optical cryptosystem. During image decryption, a retrieval algorithm is developed to extract the plaintext from the ciphertexts. In addition, security and advantages of the proposed optical cryptography topology are also analyzed.

  9. Excimer laser ablation lithography applied to the fabrication of reflective diffractive optics

    Science.gov (United States)

    Flury, M.; Benatmane, A.; Gérard, P.; Montgomery, P. C.; Fontaine, J.; Engel, T.; Schunck, J. P.; Fogarassy, E.

    2003-03-01

    We propose a low cost technique for the production of diffractive optical elements (DOE). These elements are devoted to high power lasers beam shaping in the mid-infrared wavelengths. This process called laser ablation lithography (LAL), may seem similar to laser beam writing (LBW) in the way the whole DOE's design is reproduced pixel by pixel on the substrate placed on a computer controlled XY translation stage. A first difference is that the photoresist is not exposed with UV light but is directly ablated with short excimer laser pulses. Furthermore, with LAL technique the size of the smallest pixel ( 5 μm×5 μm) is more than 10 times greater than those produced by LBW. We discuss in details the experimental set-up for LAL and demonstrate that it gives a resolution up to 10 times greater than photolithography with flexible masks. This makes LAL a promising solution for the production of DOE for use with Nd:YAG lasers. New applications of DOEs are finally introduced with high power lasers sources, such as laser marking or multi-point brazing.

  10. Corrective optics for diffraction of {gamma}-rays

    Energy Technology Data Exchange (ETDEWEB)

    Materna, T. [Nuclear Physics Institute, University of Cologne, Zuelpicher Str. 77, D-50937 Cologne (Germany) and Institut Laue-Langevin, F-38042 Grenoble, Cedex 9 (France)]. E-mail: materna@ill.fr; Bruyneel, B. [Nuclear Physics Institute, University of Cologne, Zuelpicher Str. 77, D-50937 Cologne (Germany); Jolie, J. [Nuclear Physics Institute, University of Cologne, Zuelpicher Str. 77, D-50937 Cologne (Germany); Linnemann, A. [Nuclear Physics Institute, University of Cologne, Zuelpicher Str. 77, D-50937 Cologne (Germany); Warr, N. [Nuclear Physics Institute, University of Cologne, Zuelpicher Str. 77, D-50937 Cologne (Germany); Boerner, H.G. [Institut Laue-Langevin, F-38042 Grenoble, Cedex 9 (France); Jentschel, M. [Institut Laue-Langevin, F-38042 Grenoble, Cedex 9 (France); Mutti, P. [Institut Laue-Langevin, F-38042 Grenoble, Cedex 9 (France); Simpson, G. [Institut Laue-Langevin, F-38042 Grenoble, Cedex 9 (France)

    2006-12-21

    A new method to correct imperfect bending of curved crystals used for {gamma}-ray diffraction spectroscopy is presented. It relies on using position-sensitive segmented Ge-detectors and permits the determination of the emission area of each {gamma}-ray from the crystals and therefore an off-line correction of bending imperfections as if the crystals were divided into independent 2x2 mm{sup 2} bent crystals. A first experiment using the GAMS-5 spectrometer (Institut Laue-Langevin) shows proof of the principle of the method.

  11. Measurement of Rotatory Optics Element in Tensor Dielectric Matrix for Rotatory Optical Fiber

    Institute of Scientific and Technical Information of China (English)

    LIU Jinghao; ZHANG Xiaofan; LI Huazhou; BAO Zhenwu

    2005-01-01

    The rotatory optics element in the tensor dielectric coefficient matrix is an important parameter for analyzing and calculating a rotatory optical fiber by electromagnetic theory. But the mea-surement of rotatory optics element is difficult for the rotatory optical fiber. A simple principle and method for measuring rotatory optics element are put forward in this paper. Firstly by using electromagnetic theory it was demonstrated that the rotatory optics element has a simple linear relation with the rotatory angle, and then the rotatory optics element has a simple linear relation with the magnetic field strength (or bias current in the helix coil) . Secondly a measurement system for the rotatory optics element in the rotatory optical fiber was designed. Using the measurement system the rotatory element can be obtained by measuring the bias current simply.

  12. Diffraction microgratings as a novel optical biosensing platform

    Science.gov (United States)

    Baikova, Tatiana V.; Danilov, Pavel A.; Gonchukov, Sergey A.; Yermachenko, Valery M.; Ionin, Andrey A.; Khmelnitskii, Roman A.; Kudryashov, Sergey I.; Nguyen, Trang T. H.; Rudenko, Andrey A.; Saraeva, Irina N.; Svistunova, Tatiana S.; Zayarny, Dmitry A.

    2016-07-01

    Using a micro-hole grating in a supported silver film as a laser-fabricated novel optical platform for surface-enhanced IR absoprtion/reflection spectroscopy, characteristic absorption bands of Staphylococcus aureus, in particular, its buried carotenoid fragments, were detected in FT-IR spectra with 10-fold analytical enhancement, paving the way for the spectral express-identification of pathogenic microorganisms.

  13. Quantum Optics, Diffraction Theory, and Elementary Particle Physics

    CERN Document Server

    CERN. Geneva

    2009-01-01

    Physical optics has expanded greatly in recent years. Though it remains part of the ancestry of elementary particle physics, there are once again lessons to be learned from it. I shall discuss several of these, including some that have emerged at CERN and Brookhaven.

  14. Double peacock eye optical element for extended focal depth imaging with ophthalmic applications.

    Science.gov (United States)

    Romero, Lenny A; Millán, María S; Jaroszewicz, Zbigniew; Kolodziejczyk, Andrzej

    2012-04-01

    The aged human eye is commonly affected by presbyopia, and therefore, it gradually loses its capability to form images of objects placed at different distances. Extended depth of focus (EDOF) imaging elements can overcome this inability, despite the introduction of a certain amount of aberration. This paper evaluates the EDOF imaging performance of the so-called peacock eye phase diffractive element, which focuses an incident plane wave into a segment of the optical axis and explores the element's potential use for ophthalmic presbyopia compensation optics. Two designs of the element are analyzed: the single peacock eye, which produces one focal segment along the axis, and the double peacock eye, which is a spatially multiplexed element that produces two focal segments with partial overlapping along the axis. The performances of the peacock eye elements are compared with those of multifocal lenses through numerical simulations as well as optical experiments in the image space. The results demonstrate that the peacock eye elements form sharper images along the focal segment than the multifocal lenses and, therefore, are more suitable for presbyopia compensation. The extreme points of the depth of field in the object space, which represent the remote and the near object points, have been experimentally obtained for both the single and the double peacock eye optical elements. The double peacock eye element has better imaging quality for relatively short and intermediate distances than the single peacock eye, whereas the latter seems better for far distance vision.

  15. A finite element approach to x-ray optics design

    Science.gov (United States)

    Honkanen, A. P.; Ferrero, C.; Guigay, J. P.; Mocella, V.

    2017-05-01

    Dynamical diffraction in a deformed (often bent) crystal is described by the Takagi equations 1 which, in general, have to be solved numerically on a regular 2-D grid of points representing a planar cross section of the crystal in which the diffraction of an incident X-ray wavefront occurs . Presently, the majority of numerical approaches are based on a finite difference solving scheme2-4 which can be easily implemented on a regular Cartesian grid but is not suitable for deformed meshes. In this case, the inner deformed crystal structure can be taken into account, but not the shape of the crystal surface if this differs substantially from a planar profile 5,6. Conversely, a finite element method (FEM) can be easily applied to a deformed mesh and serves very well to the purpose of modelling any incident wave on an arbitrarily shaped entrance surface 7 e.g. that of a bent crystal or a crystal submitted to a strong heat load 8-10. For instance, the cylindrical shape of the surface of a strongly bent crystal plate can easily be taken into account in a FEM calculation. Bent crystals are often used as focusing optical elements in Xray beamlines 11-13. In the following, we show the implementation of a general numerical framework for describing the propagation of X-rays inside a crystal based on the solution of the Takagi equations via the COMSOL Multiphysics FEM software package (www.comsol.com). A cylindrically bent crystal will be taken as an example to illustrate the capabilities of the new approach.

  16. Low cost and high performance GPON, GEPON and RFoG optical network pentaplexer module design using diffractive grating approach

    Science.gov (United States)

    Chen, I.-Ju; Chi, Chang-Chia; Tarn, Chen-Wen

    2016-01-01

    A new architecture of a pentaplexer transceiver module which can be used in GPON/GEPON and RFoG triple play optical networks with supporting of the multiple optical wavelengths of 1310 nm, 1490 nm, 1550 nm, 1610 nm, and 1650 nm, is proposed. By using diffractive grating elements combing with market readily available GRIN (Gradient-Index) lens, grating, mirrors, beamsplitter, LDs (Laser Diodes), and PDs (Photodetectors), the proposed design have the advantages of low cost, high efficiency/performance, easy design and manufacturing, over the contemporary triplex transceivers which are made of multilayer filters or waveguides that increase the complexity of manufacturing and reduce the performance efficiency. With the proposed design, a pentaplexer system can accommodate GPON/GEPON, RFoG, and monitoring integration services, total five optical wavelength channels into a hybrid-integrated TO-CAN package platform with sufficient efficiency.

  17. Controllable vacuum-induced diffraction of matter-wave superradiance using an all-optical dispersive cavity

    Science.gov (United States)

    Su, Shih-Wei; Lu, Zhen-Kai; Gou, Shih-Chuan; Liao, Wen-Te

    2016-10-01

    Cavity quantum electrodynamics (CQED) has played a central role in demonstrating the fundamental principles of the quantum world, and in particular those of atom-light interactions. Developing fast, dynamical and non-mechanical control over a CQED system is particularly desirable for controlling atomic dynamics and building future quantum networks at high speed. However conventional mirrors do not allow for such flexible and fast controls over their coupling to intracavity atoms mediated by photons. Here we theoretically investigate a novel all-optical CQED system composed of a binary Bose-Einstein condensate (BEC) sandwiched by two atomic ensembles. The highly tunable atomic dispersion of the CQED system enables the medium to act as a versatile, all-optically controlled atomic mirror that can be employed to manipulate the vacuum-induced diffraction of matter-wave superradiance. Our study illustrates a innovative all-optical element of atomtroics and sheds new light on controlling light-matter interactions.

  18. Optically Induced Lattice Dynamics of hexagonal manganite using Ultrafast X-ray Diffraction

    Science.gov (United States)

    Lee, Hae Ja; Workman, J. B.; Hur, N.

    2005-03-01

    We have studied the picosecond lattice dynamics of optically pumped hexagonal manganite LuMnO3 using ultrafast x-ray diffraction. The results show a shift and broadening of the diffraction curve due to the stimulated lattice expansion. To understand the transient response of the lattice, the measured time- and angle-resolved diffraction curves are compared with a theoretical calculation based on dynamical diffraction theory modified for the hexagonal crystal structure of LuMnO3. Our simulations reveal that a large coupling coefficient between the a-b plane and the c-axis (c13) is required to the data. We compare this result to our previous coherent phonon studies of LuMnO3 using optical pump-probe spectroscopy.

  19. Optical theorem for multipole sources in wave diffraction theory

    Science.gov (United States)

    Eremin, Yu. A.; Sveshnikov, A. G.

    2016-05-01

    The optical theorem is generalized to the case of local body excitation by multipole sources. It is found that, to calculate the extinction cross section, it is sufficient to calculate the scattered field derivatives at a single point. It is shown that the Purcell factor, which is a rather important parameter, can be represented in analytic form. The result is generalized to the case of a local scatterer incorporated in a homogeneous halfspace.

  20. Theoretical and numerical investigations of sub-wavelength diffractive optical structures

    DEFF Research Database (Denmark)

    Dridi, Kim

    2000-01-01

    The work in this thesis concerns theoretical and numerical investigations of sub-wavelength diffractive optical structures, relying on advanced two-dimensional vectorial numerical models that have applications in Optics and Electromagnetics. Integrated Optics is predicted to play a major role...... in future technologies. For this to come true, more advanced optical signal processing must be achieved in miniaturized multifunctional components which should enable optimal light control and light localization. These components have complex subwavelength geometries and material distributions......, such as in dielectric waveguides with gratings and periodic media or photonic crystal structures. The vectorial electromagnetic nature of light is therefore taken into account in the modeling of these diffractive structures. An electromagnetic vector-field model for optical components design based on the classical...

  1. Optical study of a spectrum splitting solar concentrator based on a combination of a diffraction grating and a Fresnel lens

    Energy Technology Data Exchange (ETDEWEB)

    Michel, Céline, E-mail: cmichel@ulg.ac.be; Habraken, Serge [Centre Spatial de Liège, Avenue du Pré-Aily, 4031 Angleur (Belgium); Hololab, University of Liège, Allée du 6 Août, 17 (B5a), 4000 Liège (Belgium); Loicq, Jérôme; Thibert, Tanguy [Centre Spatial de Liège, Avenue du Pré-Aily, 4031 Angleur (Belgium)

    2015-09-28

    This paper presents recent improvements of our new solar concentrator design for space application. The concentrator is based on a combination of a diffraction grating (blazed or lamellar) coupled with a Fresnel lens. Thanks to this diffractive/refractive combination, this optical element splits spatially and spectrally the light and focus approximately respectively visible light and IR light onto electrically independent specific cells. It avoid the use of MJs cells and then also their limitations like current matching and lattice matching conditions, leading theoretically to a more tolerant system. The concept is reminded, with recent optimizations, ideal and more realistic results, and the description of an experimental realization highlighting the feasibility of the concept and the closeness of theoretical and experimental results.

  2. Design of tracking and detecting lens system by diffractive optical method

    Science.gov (United States)

    Yang, Jiang; Qi, Bo; Ren, Ge; Zhou, Jianwei

    2016-10-01

    Many target-tracking applications require an optical system to acquire the target for tracking and identification. This paper describes a new detecting optical system that can provide automatic flying object detecting, tracking and measuring in visible band. The main feature of the detecting lens system is the combination of diffractive optics with traditional lens design by a technique was invented by Schupmann. Diffractive lens has great potential for developing the larger aperture and lightweight lens. First, the optical system scheme was described. Then the Schupmann achromatic principle with diffractive lens and corrective optics is introduced. According to the technical features and requirements of the optical imaging system for detecting and tracking, we designed a lens system with flat surface Fresnel lens and cancels the optical system chromatic aberration by another flat surface Fresnel lens with effective focal length of 1980mm, an F-Number of F/9.9 and a field of view of 2ωω = 14.2', spatial resolution of 46 lp/mm and a working wavelength range of 0.6 0.85um. At last, the system is compact and easy to fabricate and assembly, the diffuse spot size and MTF function and other analysis provide good performance.

  3. Novel optical super-resolution pattern with upright edges diffracted by a tiny thin aperture.

    Science.gov (United States)

    Wu, Jiu Hui; Zhou, Kejiang

    2015-08-24

    In the past decade numerous efforts have been concentrated to achieve optical imaging resolution beyond the diffraction limit. In this letter a thin microcavity theory of near-field optics is proposed by using the power flow theorem firstly. According to this theory, the near-field optical diffraction from a tiny aperture whose diameter is less than one-tenth incident wavelength embedded in a thin conducting film is investigated by considering this tiny aperture as a thin nanocavity. It is very surprising that there exists a kind of novel super-resolution diffraction patterns showing resolution better than λ/80 (λ is the incident wavelength), which is revealed for the first time to our knowledge in this letter. The mechanism that has allowed the imaging with this kind of super-resolution patterns is due to the interaction between the incident wave and the thin nanocavity with a complex wavenumber. More precisely, these super-resolution patterns with discontinuous upright peaks are formed by one or three items of the integration series about the cylindrical waves according to our simulation results. This novel optical super-resolution with upright edges by using the thin microcavity theory presented in the study could have potential applications in the future semiconductor lithography process, nano-size laser-drilling technology, microscopy, optical storage, optical switch, and optical information processing.

  4. The Interaction of Optical Guided Modes with Waveguide Diffraction Gratings.

    Science.gov (United States)

    Weller-Brophy, Laura Ann

    In this thesis the results of a theoretical and experimental investigation of the coupling of guided modes by waveguide gratings are presented. This work is motivated by the potential application of waveguide gratings to integrated optical devices. The coupling of guided modes obliquely incident to both periodic and aperiodic gratings is a mechanism basic to the operation of integrated optical components such as filters, reflectors, beamsplitters, and modulators. It is shown in the Introduction to this thesis, that this mechanism is not modeled consistently by the analyses presented in the literature. For the case of TM-TM coupling, virtually each analytical treatment predicts a different value for the grating reflectivity. In addition, it is found that the typical Coupled-Mode formalisms used to derive the grating reflectivity do not offer an intuitive picture of the operation of waveguide gratings. These two particular problem areas serve as the focal points of this thesis. The latter of these is addressed through the development of a thin film model of the operation of waveguide gratings. This model presents an intuitively appealing picture of the interaction of waveguide gratings and guided modes. It also yields grating reflectivities which are in excellent agreement with those obtained through the numerical solution of the Coupled-Mode equations for both periodic and aperiodic gratings. The bulk of this research project is directed towards resolving the conflicting theoretical grating analyses presented in the literature. A new derivation of the coupling of guided modes obliquely incident to periodic gratings is presented in Chapter II of this thesis. This derivation is based on the Local Normal Mode expansion used by Marcuse for the case of normal incidence. It produces coupling coefficients which are nearly identical to those derived using the rigorous Boundary Perturbation technique. The coupling coefficients predicted by this Local Normal Mode formalism

  5. New metrology techniques improve the production of silicon diffractive optics

    Science.gov (United States)

    Brooks, Cynthia B.; Gully-Santiago, Michael; Grigas, Michelle; Jaffe, Daniel T.

    2014-07-01

    Silicon immersion gratings and grisms offer significant advantages in compactness and performance over frontsurface gratings and over grisms made from lower-index materials. At the same time, the high refractive index of Si (3.4) leads to very stringent constraints on the allowable groove position errors, typically rms error of errors and their origins, we could then implement process controls for each step. The plasma uniformity was improved for the silicon nitride mask etch process and the phase contribution of the plasma etch step was measured. We then used grayscale lithography, a technique in which the photoresist is deliberately underexposed, to measure large-scale nonuniformities in the UV exposure system to an accuracy of 3-5%, allowing us to make corrections to the optical alignment. Additionally, we used a new multiple-exposure technique combined with laser interferometry to measure the relationship between UV exposure dose and line edge shift. From these data we predict the contribution of the etching and photolithographic steps to phase error of the grating surface. These measurements indicate that the errors introduced during the exposure step dominate the contributions of all the other processing steps. This paper presents the techniques used to quantify individual process contributions to phase errors and steps that were taken to improve overall phase uniformity.

  6. Exceptionally strong Bragg diffraction from a mesoporous silica film pretreated with chlorotrimethylsilane toward application in X-ray optics.

    Science.gov (United States)

    Kubo, Wataru; Takahashi, Masahiko; Komoto, Atsushi; Okamoto, Kohei; Miyata, Hirokatsu

    2012-01-28

    Exceptionally strong Bragg diffraction from a mesoporous silica film is achieved by exposing the as-deposited film to vapor of chlorotrimethylsilane (Me(3)SiCl) before extracting the surfactant. The intensity of the X-ray diffraction peak increased 7 times after the surfactant removal and it approached 30% reflectivity. This large increase of diffraction intensity cannot be explained simply by the improved contrast of the electron density, and rearrangement of the pore wall during the Me(3)SiCl vapor treatment is suggested. It is shown by infrared spectroscopy that Me(3)SiCl with a high grafting reactivity effectively caps the silanol groups and prevents the following condensation, which causes the structural degradation. The substitution of the hydrogen atom of hydroxyl groups with trimethylsilyl groups should help the improvement of the structural regularity by reducing the hydrogen bonds in the pore wall. The achieved strong diffraction opens the gate for the application of these regular mesoporous films prepared by a self-assembly process to optical elements in the X-ray region.

  7. Bragg diffraction of fermions at optical potentials; Braggbeugung von Fermionen an optischen Potentialen

    Energy Technology Data Exchange (ETDEWEB)

    Deh, Benjamin

    2008-10-27

    This thesis describes the Bragg diffraction of ultracold fermions at an optical potential. A moving optical lattice was created, by overlaying two slightly detuned lasers. Atoms can be diffracted at this lattice if the detuning fulfills the Bragg condition for resting atoms. This Bragg diffraction is analyzed systematically in this thesis. To this end Rabi oscillations between the diffraction states were driven, as well in the weakly interacting Bragg regime, as in the strongly interacting Kapitza-Dirac regime. Simulations, based on a driven two-, respectively multilevel-system describe the observed effects rather well. Furthermore, the temporal evolution of the diffracted states in the magnetic trapping potential was studied. The anharmonicity of the trap in use and the scattering cross section for p-wave collisions in a {sup 6}Li system was determined from the movement of these states. Moreover the momentum distribution of the fermions was measured with Bragg spectroscopy and first signs of Fermi degeneracy were found. Finally an interferometer with fermions was build, exhibiting a coherence time of more than 100 {mu}s. With this, the possibility for measurement and manipulation of ultracold fermions with Bragg diffraction could bee shown. (orig.)

  8. Pd grating obtained by direct micromolding for use in high resolution optical diffraction based sensing

    Indian Academy of Sciences (India)

    Ritu Gupta; Giridhar U Kulkarni

    2012-10-01

    Pd grating patterns have been fabricated using the process of micromolding in capillary employing a Pd alkanethiolate precursor, which could be converted to metal in situ by thermolysis. Thus generated Pd grating were uniform in width (∼950 nm) and spacing (∼450 nm) over millimeter square areas on glass substrates. Importantly, the pattern when used as an optical grating produced a diffraction pattern with a high resolution (> 2000); the intensities of widely separated (diffraction angle, ∼26.8°) diffracted spots could be measured using a simple photodiode. By varying the concentration of Pd precursor (2mMto 25 mM), thickness of the resulting gratings could be adjusted in the range of ∼15–115 nm. By adjusting the grating parameters optimally, a maximum diffraction efficiency of 36% has been achieved. Thus fabricated Pd grating was used as seed catalyst to deposit Cu by electroless plating. The Cu deposition process has also been monitored by employing AFM, SEM and EDS analysis. The diffraction efficiency values corroborate well with the changes in the grating thickness due to Cu deposition. The grating structures presented can be reproducibly fabricated for rapidly emerging optical diffraction based sensing applications. This has been demonstrated in the case of aqueous Cu2+ by depositing the latter electrolessly on Pd.

  9. OPTICAL STORAGE MECHANISM AND HIGH-ORDER DIFFRACTION PROPERTIES OF NITROAZOBENZENE-CONTAINING POLYESTER FILMS

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    Using Nd:YAG second harmonic pulse (100 ps), the optical storage properties of two novel polyesters, poly [4'-bis (N, N-oxyethylene) imino-4-nitroazobenzene succinyl] and poly [2'-chloro-4'-bis (N, N-oxyethylene) imino-4-nitroazobenzene succinyl] have been studied by multiwave mixing. The high-order diffractions of the orientation gratingsinduced by anisotropy via the reorientation of nitroazobenzene groups and optical information storage with long-term stability have been realized by multiwave mixing in their films. Up to 3rd order forward diffraction was detected in two wave mixing, while up to 4th order backward diffraction was observed in degenerated four wave mixing. The recording mechanism was explained by the trans-cis-trans isomerization cycles of azobenzene groups.The isomerization of these azobenzene groups probably undergoes with inversion mechanism under the experimental conditions. The information recorded in these films has been kept for more than 6 months.

  10. Specific features of measuring the optical power of artificial refractive and diffractive-refractive eye lenses

    Science.gov (United States)

    Lenkova, G. A.

    2016-08-01

    Methods for monitoring the optical power of artificial refractive eye lenses (intraocular lenses) based on measuring focal lengths in air and in medium are analyzed. The methods for determining the refraction of diffractive-refractive lenses (in particular, of MIOL-Akkord type), with allowance for the specific features of the diffractive structure, are considered. A computer simulation of the measurement of the focal length of MIOL-Akkord lenses is performed. The effective optical power of the diffractive component of these lenses is shown to depend on the diaphragm diameter. The optimal diaphragm diameter, at which spherical aberrations do not affect the position of foci, is found to be 3 mm. Possible errors in measuring the focal lengths are analyzed, and the necessary corrections that must be introduced into measurement results and calculations of refractions are determined.

  11. Information Storage and Retrieval for Probe Storage using Optical Diffraction Patterns

    CERN Document Server

    van Honschoten, Joost; Koelmans, Wabe W; Parnell, Thomas P; Zaboronski, Oleg V

    2011-01-01

    A novel method for fast information retrieval from a probe storage device is considered. It is shown that information can be stored and retrieved using the optical diffraction patterns obtained by the illumination of a large array of cantilevers by a monochromatic light source. In thermo-mechanical probe storage, the information is stored as a sequence of indentations on the polymer medium. To retrieve the information, the array of probes is actuated by applying a bending force to the cantilevers. Probes positioned over indentations experience deflection by the depth of the indentation, probes over the flat media remain un-deflected. Thus the array of actuated probes can be viewed as an irregular optical grating, which creates a data-dependent diffraction pattern when illuminated by laser light. We develop a low complexity modulation scheme, which allows the extraction of information stored in the pattern of indentations on the media from Fourier coefficients of the intensity of the diffraction pattern. We th...

  12. Spatially Resolved Elemental Analysis, Spectroscopy and Diffraction at the GSECARS Sector at the Advanced Photon Source

    Energy Technology Data Exchange (ETDEWEB)

    Sutton, Stephen R.; Lanzirotti, Antonio; Newville, Matthew; Rivers, Mark L.; Eng, Peter; Lefticariu, Liliana

    2017-01-01

    X-ray microprobes (XRM) coupled with high-brightness synchrotron X-ray facilities are powerful tools for environmental biogeochemistry research. One such instrument, the XRM at the Geo Soil Enviro Center for Advanced Radiation Sources Sector 13 at the Advanced Photon Source (APS; Argonne National Laboratory, Lemont, IL) was recently improved as part of a canted undulator geometry upgrade of the insertion device port, effectively doubling the available undulator beam time and extending the operating energy of the branch supporting the XRM down to the sulfur K edge (2.3 keV). Capabilities include rapid, high-resolution, elemental imaging including fluorescence microtomography, microscale X-ray absorption fine structure spectroscopy including sulfur K edge capability, and microscale X-ray diffraction. These capabilities are advantageous for (i) two-dimensional elemental mapping of relatively large samples at high resolution, with the dwell times typically limited only by the count times needed to obtain usable counting statistics for low concentration elements, (ii) three-dimensional imaging of internal elemental distributions in fragile hydrated specimens, such as biological tissues, avoiding the need for physical slicing, (iii) spatially resolved speciation determinations of contaminants in environmental materials, and (iv) identification of contaminant host phases. In this paper, we describe the XRM instrumentation, techniques, applications demonstrating these capabilities, and prospects for further improvements associated with the proposed upgrade of the APS.

  13. Optical diffraction studies of crystalline structures in electron micrographs. I. Theoretical considerations.

    Science.gov (United States)

    Berger, J E

    1969-12-01

    Determination of the unit cell of crystalline particles by optical diffraction analysis of electron micrographs may establish the identity and help in approximating the molecular weight of the substances contained in the crystal. This technique may be particularly helpful when isolation and purification of the crystalline material cannot be accomplished.

  14. Optical necklaces generated by the diffraction on a stack of dielectric wedges

    Energy Technology Data Exchange (ETDEWEB)

    Izdebskaya, Yana [Nonlinear Physics Centre, Research School of Physical Sciences and Engineering, Australian National University, Canberra ACT 0200 (Australia); Department of Physics, V.I. Vernandsky Taurida National University, Simferopol 95007, Crimea (Ukraine)], E-mail: yvi124@rsphysse.anu.edu.au

    2008-05-19

    We demonstrate that the regular ring-shaped arrays of Gaussian beams, or optical necklaces, can be generated using diffraction on a stack of dielectric wedges. A condition for self-similarity and structural stability of the beams has been derived and shows good comparison with experimental data.

  15. Geometrical Reasoning in Wave Situations: The Case of Light Diffraction and Coherent Illumination Optical Imaging

    Science.gov (United States)

    Maurines, Laurence

    2010-01-01

    This particular study is part of a research programme on the difficulties encountered by students when learning about wave phenomena in a three-dimensional medium in the absence or presence of obstacles. It focuses on how students reason in situations in which wave optics need to be used: diffraction of light by an aperture, imaging in the…

  16. Potentiality of optical diffraction grating technology in the fabrication of miniaturized multicapillary chromatographic and electrophoresis columns.

    Science.gov (United States)

    Samsonov, Y N

    2001-10-01

    A possible way of fabricating miniaturized multicapillary columns for gas and liquid chromatographs or electrophoresis devices containing many thousands of identical channels with a width (or depth) of approximately 1-30 microm by means of industrial technology for the production of optical plane reflecting diffraction gratings is proposed.

  17. Enhancement of coherent X-ray diffraction from nanocrystals by introduction of X-ray optics.

    Science.gov (United States)

    Robinson, Ian; Pfeiffer, Franz; Vartanyants, Ivan; Sun, Yugang; Xia, Younan

    2003-09-22

    Coherent X-ray Diffraction is applied to investigate the structure of individual nanocrystalline silver particles in the 100nm size range. In order to enhance the available signal, Kirkpatrick-Baez focusing optics have been introduced in the 34-ID-C beamline at APS. Concerns about the preservation of coherence under these circumstances are addressed through experiment and by calculations.

  18. Diffractive beam shaping, tracking and coupling for wave-guided optical waveguides (WOWs)

    DEFF Research Database (Denmark)

    Villangca, Mark Jayson; Bañas, Andrew Rafael; Aabo, Thomas

    2014-01-01

    We have previously proposed and demonstrated the targeted-light delivery capability of wave-guided optical waveguides (WOWs). The full strength of this structure-mediated paradigm can be harnessed by addressing multiple WOWs and manipulating them to work in tandem. We propose the use of diffractive...

  19. LIGHT MODULATION: Wide-aperture diffraction of unpolarised radiation in a system of two acousto-optic filters

    Science.gov (United States)

    Magdich, L. N.; Yushkov, K. B.; Voloshinov, V. B.

    2009-04-01

    Light diffraction is studied in two tandem acousto-optic cells filtering unpolarised radiation with a wide angular spectrum. It is shown that the side lobes of the ultrasonic radiation pattern of a piezoelectric transducer produce side diffraction intensity maxima at the output of the system consisting of two filters. Diffraction in paratellurite filters is studied experimentally at 1.06 μm.

  20. Glass Difractive Optical Elements (DOEs with complex modulation DLC thin film coated

    Directory of Open Access Journals (Sweden)

    Marina Sparvoli

    2008-09-01

    Full Text Available We developed a complex (amplitude and phase modulation Diffractive Optical Element (DOE with four phase levels, which is based in a glass substrate coated with DLC (Diamond Like Carbon thin film as the amplitude modulator. The DLC film was deposited by magnetron reactive sputtering with a graphite target and methane gas in an optical glass surface. The glass and DLC film roughness were measured using non destructive methods, such as a high step meter, Atomic Force Microscopy and Diffuse Reflectance. Other properties, such as refractive index of both materials were measured. The DOEs were tested using 632.8 nm HeNe laser.

  1. Molecularly imprinted polymer diffraction grating as label-free optical bio(mimetic)sensor.

    Science.gov (United States)

    Barrios, C A; Zhenhe, C; Navarro-Villoslada, F; López-Romero, D; Moreno-Bondi, M C

    2011-01-15

    Micropatterned molecularly imprinted polymer (MIP) transmissive 2D diffraction gratings (DGs) are fabricated and evaluated as label-free antibiotic bio(mimetic)sensors. Polymeric gratings are prepared by using microtransfer molding based on SiO(2)/Si molds. The morphology of the MIP gratings is studied by optical and atomic force microscopes. MIP 2D-DGs exhibit 2D optical diffraction patterns, and measurement of changes in diffraction efficiency is used as sensor response. The refractive index of the micropatterned MIP material was estimated, via solvent index matching experiments, to be 1.486. Immersion of a MIP 2D-DG in different solutions of target-antibiotic enrofloxacin leads to significant variations in diffraction efficiency, demonstrating target-molecule detection. On the other hand, no significant response is observed for both control experiments: MIP grating exposed to a non-retained analyte and an equivalent non-imprinted polymer grating exposed to the target analyte, showing highly specific antibiotic label-free optical recognition.

  2. High-accuracy calibration of an adaptive optics system using a phase shifting diffraction interferometer

    Energy Technology Data Exchange (ETDEWEB)

    Bauman, B J; Campbell, E W; Olivier, S S; Sweider, D R

    1999-06-23

    A phase-shifting diffraction interferometer (PSDI) has been integrated into an adaptive optics (AO) system developed by LLNL for use on the three meter Shane telescope at Lick Observatory. The interferometer is an all fiber optic design, which is extremely compact. It is useful for calibrating the control sensors, measuring the aberrations of the entire AO optical train, and measuring the influence functions of the individual actuators on the deformable mirror. The PSDI is particularly well suited for this application because it measures converging, quasi-spherical wavefronts, such as are produced by an AO imaging system. Thus, a PSDI can be used to measure the aberrations of the entire AO system, in-situ and without errors introduced by auxiliary optics. This provides an extremely accurate measurement ({approximately} 5 nm RMS) of the optical properties of the AO system.

  3. An iterative Rankine boundary element method for wave diffraction of a ship with forward speed

    Institute of Scientific and Technical Information of China (English)

    何广华

    2014-01-01

    A 3-D time-domain seakeeping analysis tool has been newly developed by using a higher-order boundary element method with the Rankine source as the kernel function. An iterative time-marching scheme for updating both kinematic and dynamic free-surface boundary conditions is adopted for achieving numerical accuracy and stability. A rectangular computational domain moving with the mean speed of ship is introduced. A damping beach at the outer portion of the truncated free surface is installed for satisfying the radiation condition. After numerical convergence checked, the diffraction unsteady problem of a Wigley hull traveling with a constant forward speed in waves is studied. Extensive results including wave exciting forces, wave patterns and pressure distributions on the hull are presented to validate the efficiency and accuracy of the proposed 3-D time-domain iterative Rankine BEM approach. Computed results are compared to be in good agreement with the corresponding experimental data and other published numerical solutions.

  4. Neutron Diffraction and Optics of a Noncentrosymmetric Crystal. New Feasibility of a Search for Neutron EDM

    OpenAIRE

    Fedorov, V. V.; Voronin, V. V.

    2005-01-01

    Recently strong electric fields (up to 10^9 V/cm) have been discovered, which affect the neutrons moving in noncentrosymmetric crystals. Such fields allow new polarization phenomena in neutron diffraction and optics and provide, for instance, a new feasibility of a search for the neutron electric dipole moment (EDM). A series of experiments was carried out in a few last years on study of the dynamical diffraction of polarized neutrons in thick (1-10 cm) quartz crystals, using the forward diff...

  5. Time-multiplexed structured illumination using a DMD for optical diffraction tomography

    CERN Document Server

    Lee, Kyeoreh; Kim, Geon; Shin, Seungwoo; Park, YongKeun

    2016-01-01

    We present a novel illumination control technique for optical diffraction tomography (ODT). Various spatial frequencies of beam illumination were controlled by displaying time-averaged sinusoidal patterns using a digital micromirror device (DMD). Compared to the previous method using binary Lee holograms, the present method eliminates unwanted diffracted beams which may deteriorate the image quality of the ODT. We demonstrated the capability of the present method by reconstructing three-dimensional refractive index (RI) distributions of various samples, with high RI sensitivity (\\sigma_\\Delta n = 3.15 +/- 10-4), and reconstructing 3-D RI tomograms of biological samples, which provided quantitative biochemical and morphological information about the samples.

  6. Silicon-on-Insulator-Based Compact Optical Demultiplexer Employing Etched Diffraction Grating

    Institute of Scientific and Technical Information of China (English)

    WANG Wen-Hui; TANG Yan-Zhe; WANG Yun-Xiang; QU Hong-Chang; WU Ya-Ming; LI Tie; YANG Jian-Yi; WANG Yue-Lin; LIU Ming

    2004-01-01

    A compact optical demultiplexer with etched diffraction grating (EDG) is designed and fabricated on a siliconon-insulator (SOI) material. Several 90° turning mirrors are used to bend the waveguides, and the size of the EDG-based demultiplexer is minimized to only 16 × 1.7mm2. The crosstalk is about -18 dB. The on-chip loss is about 18.2dB, which is composed of about 16.9dB excess loss and 1.3dB diffraction loss. Measures to improve the performance are discussed.

  7. Optical color-image encryption in the diffractive-imaging scheme

    Science.gov (United States)

    Qin, Yi; Wang, Zhipeng; Pan, Qunna; Gong, Qiong

    2016-02-01

    By introducing the theta modulation technique into the diffractive-imaging-based optical scheme, we propose a novel approach for color image encryption. For encryption, a color image is divided into three channels, i.e., red, green and blue, and thereafter these components are appended by redundant data before being sent to the encryption scheme. The carefully designed optical setup, which comprises of three 4f optical architectures and a diffractive-imaging-based optical scheme, could encode the three plaintexts into a single noise-like intensity pattern. For the decryption, an iterative phase retrieval algorithm, together with a filter operation, is applied to extract the primary color images from the diffraction intensity map. Compared with previous methods, our proposal has successfully encrypted a color rather than grayscale image into a single intensity pattern, as a result of which the capacity and practicability have been remarkably enhanced. In addition, the performance and the security of it are also investigated. The validity as well as feasibility of the proposed method is supported by numerical simulations.

  8. In situ observation of the formation of TiC from the elements by neutron diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Winkler, Bjoern [Institut fuer Geowissenschaften, Abteilung Kristallographie, Universitaet Frankfurt, Senckenberganlage 30, D-60054 Frankfurt (Germany)]. E-mail: b.winkler@kristall.uni-frankfurt.de; Wilson, Dan J. [Institut fuer Geowissenschaften, Abteilung Kristallographie, Universitaet Frankfurt, Senckenberganlage 30, D-60054 Frankfurt (Germany); Vogel, Sven C. [Los Alamos National Laboratory, Lujan Center, Mail Stop H805, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Brown, Donald W. [Los Alamos National Laboratory, Lujan Center, Mail Stop H805, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Sisneros, Thomas A. [Los Alamos National Laboratory, Lujan Center, Mail Stop H805, Los Alamos National Laboratory, Los Alamos, NM 87545 (United States); Milman, Victor [Accelrys Inc., 334 Science Park, Cambridge CB4 0WN (United Kingdom)

    2007-08-30

    In situ neutron diffraction has been employed to investigate the formation of TiC{sub x} from the elements at relatively low temperatures, beginning at T{approx} 1073 deg. K. Slow heating of the mixture of the elements precludes the generation of sufficient heat to induce a self-propagating high temperature synthesis (SHS), reported in the literature for this system. We observe that the reaction starts well before the {alpha} -{beta} transition in Ti occurs, which implies that in this case this transition does not serve as a trigger mechanism for SHS. An extensive coexistence of both polymorphs of titanium suggests that a significant amount of carbon diffuses into the hexagonal {alpha}-Ti lattice and stabilizes it with respect to the cubic {beta}-phase. This is supported by the observation of an anomalous increase of the c-lattice parameter of the {alpha}-Ti lattice above the transition temperature for pure {alpha}-Ti. Density functional theory (DFT) based calculations support this interpretation. The energetics of the carburization of {alpha}-Ti have been obtained from the DFT calculations.

  9. Model-based correction of diffraction effects of the virtual source element.

    Science.gov (United States)

    Wennerström, Erik; Stepinski, Tadeusz

    2007-08-01

    A method for ultrasonic synthetic aperture imaging using finite-sized transducers is introduced that is based on a virtual source (VS) concept. In this setup, a focused transducer creates a VS element at its focal point that facilitates the use of synthetic aperture focusing technique (SAFT). It is shown that the performance of the VS method may be unsatisfactory due to the distortion introduced by the diffraction effects of the aperture used for creating the VS element. A solution to this problem is proposed that consists of replacing the classical SAFT by the extended synthetic aperature focusing technique (ESAFT) algorithm presented in our earlier works. In ESAFT, the full geometry of the VS is modeled, instead of applying the simplified point source approximation used when VS is combined with classical SAFT. The proposed method yields a substantial improvement in spatial resolution compared to that obtained using SAFT. Performance of the proposed algorithm is first demonstrated on simulated data, then verified on real data acquired with an array system.

  10. Experimental observation and investigation of the prewave zone effect in optical diffraction radiation

    Directory of Open Access Journals (Sweden)

    P. Karataev

    2008-03-01

    Full Text Available Transition radiation (TR and diffraction radiation (DR has widely been used for both electron beam diagnostics and generation of intense radiation beams in the millimeter and the submillimeter wavelength range. Recently, it was theoretically predicted that TR and DR properties change either at extremely high energies of electrons or at long radiation wavelengths. This phenomenon was called a prewave zone effect. We have performed the first observation and detailed investigation of the prewave zone effect in optical diffraction radiation at 1.28 GeV electron beam at the KEK-Accelerator Test Facility (KEK-ATF. The beam energy at KEK-ATF is definitely not the highest one achieved in the world. Since we could easily observe the effect, at higher energies it might cause serious problems. We developed and applied a method for prewave zone suppression valid for optical wavelengths. Furthermore, a method for prewave zone suppression applicable for longer radiation wavelengths is discussed.

  11. Optically induced lattice dynamics probed with ultrafast x-ray diffraction

    Science.gov (United States)

    Lee, H. J.; Workman, J.; Wark, J. S.; Averitt, R. D.; Taylor, A. J.; Roberts, J.; McCulloch, Q.; Hof, D. E.; Hur, N.; Cheong, S.-W.; Funk, D. J.

    2008-04-01

    We have studied the picosecond lattice dynamics of optically pumped hexagonal LuMnO3 by using ultrafast x-ray diffraction. The results show a shift and broadening of the diffraction curve due to the stimulated lattice expansion. To understand the transient response of the lattice, the measured time- and angle-resolved diffraction curves are compared to a theoretical calculation based on the dynamical diffraction theory of coherent phonon propagation modified for the hexagonal crystal structure of LuMnO3 . Our simulations reveal that a large coupling coefficient (c13) between the a-b plane and the c axis is required to fit the data. Though we interpret the transient response within the framework of thermal coherent phonons, we do not exclude the possibility of strong nonthermal coupling of the electronic excitation to the atomic framework. We compare this result to our previous coherent phonon studies of LuMnO3 in which we used optical pump-probe spectroscopy.

  12. Long-baseline optical intensity interferometry: Laboratory demonstration of diffraction-limited imaging

    CERN Document Server

    Dravins, Dainis; Nuñez, Paul D

    2015-01-01

    A long-held vision has been to realize diffraction-limited optical aperture synthesis over kilometer baselines. This will enable imaging of stellar surfaces and their environments, and reveal interacting gas flows in binary systems. An opportunity is now opening up with the large telescope arrays primarily erected for measuring Cherenkov light in air induced by gamma rays. With suitable software, such telescopes could be electronically connected and also used for intensity interferometry. Second-order spatial coherence of light is obtained by cross correlating intensity fluctuations measured in different pairs of telescopes. With no optical links between them, the error budget is set by the electronic time resolution of a few nanoseconds. Corresponding light-travel distances are approximately one meter, making the method practically immune to atmospheric turbulence or optical imperfections, permitting both very long baselines and observing at short optical wavelengths. Previous theoretical modeling has shown ...

  13. Experimentally observe the effect of spherical aberration on diffractive intraocular lens using adaptive optics

    Science.gov (United States)

    Guo, Huanqing; DeLestrange, Elie

    2015-03-01

    We first investigated the similarity in optical quality of a batch of diffractive intraocular lenses (DIOLs), providing experimental evidence for one DIOL as representative of a batch. Using adaptive optics, we then evaluated one DIOL under different levels of Zernike spherical aberration (SA) by applying both a point spread function test and a psychophysical visual acuity test. We found that for small aperture size SA has the effect of shifting the through-focus curve of DIOL. Also, for a relatively large aperture size, it has different effects on the distant and near foci.

  14. Reconstruction method for samples with refractive index discontinuities in optical diffraction tomography

    Science.gov (United States)

    Ma, Xichao; Xiao, Wen; Pan, Feng

    2017-07-01

    We present a reconstruction method for samples containing localized refractive index (RI) discontinuities in optical diffraction tomography. Abrupt RI changes induce regional phase perturbations and random spikes, which will be expanded and strengthened by existing tomographic algorithms, resulting in contaminated reconstructions. This method avoids the disturbance by recognition and separation of the discontinuous regions, and recombination of individually reconstructed data. Three-dimensional RI distributions of two fusion spliced optical fibers with different typical discontinuities are demonstrated, showing distinctly detailed structures of the samples as well as the positions and estimated shapes of the discontinuities.

  15. Pixel size and pitch measurements of liquid crystal spatial light modulator by optical diffraction

    Indian Academy of Sciences (India)

    Ravinder Kumar Banyal; B Raghavendra Prasad

    2005-08-01

    We present a simple technique for the determination of pixel size and pitch of liquid crystal (LC) based spatial light modulator (SLM). The proposed method is based on optical diffraction from pixelated LC panel that has been modeled as a two-dimensional array of rectangular apertures. A novel yet simple, two-plane measurement technique is implemented to circumvent the difficulty in absolute distance measurement. Experimental results are presented for electrically addressed twisted nematic LC-SLM removed from the display projector.

  16. Experimental modules covering imaging, diffraction, Fourier optics and polarization based on a liquid-crystal cell SLM

    Science.gov (United States)

    Hermerschmidt, Andreas

    2009-06-01

    In close collaboration with four German universities, we have developed tutorials for experiments based on a transmissive liquid-crystal spatial light modulator (SLM). The experimental tutorials are grouped in six project modules, which cover a wide range of phenomena and have different levels of difficulty. At a basic level, students can investigate the SLM in its probably most well-known application as an image-generating element in a simple optical projector setup. At more advanced levels, the application as an adaptive optical element can be investigated in three different projects covering wave-optical phenomena. The fields covered include Fourier Optics using the SLM as a dynamic fan-out beam-splitter or kinoform, Computer-Generated Holography and basic Interferometry. For the support of these projects, software was developed which permits the generation of adaptive optical structures by the student with a user-friendly interface, while the underlying algorithms are explained in the theoretical tutorial. The modulation of the light by the twisted-neumatic liquid crystal cells of the SLM can be investigated in the two most advanced projects. In the first one, the parameters of the cell and the components of its Jones matrix can be derived from transmission measurements with rotatable polarizers at a number of different wavelengths. This project gives insight to the Jones matrix calculus at the level required for the analysis. In the second one, the complex-valued transmission of the SLM is determined by measuring the diffraction efficiency of dynamically addressed Ronchi gratings.

  17. Sighting optics including an optical element having a first focal length and a second focal length

    Science.gov (United States)

    Crandall, David Lynn

    2011-08-01

    One embodiment of sighting optics according to the teachings provided herein may include a front sight and a rear sight positioned in spaced-apart relation. The rear sight includes an optical element having a first focal length and a second focal length. The first focal length is selected so that it is about equal to a distance separating the optical element and the front sight and the second focal length is selected so that it is about equal to a target distance. The optical element thus brings into simultaneous focus, for a user, images of the front sight and the target.

  18. Dual Ion Beam Deposition Of Diamond Films On Optical Elements

    Science.gov (United States)

    Deutchman, Arnold H.; Partyka, Robert J.; Lewis, J. C.

    1990-01-01

    Diamond film deposition processes are of great interest because of their potential use for the formation of both protective as well as anti-reflective coatings on the surfaces of optical elements. Conventional plasma-assisted chemical vapor deposition diamond coating processes are not ideal for use on optical components because of the high processing temperatures required, and difficulties faced in nucleating films on most optical substrate materials. A unique dual ion beam deposition technique has been developed which now makes possible deposition of diamond films on a wide variety of optical elements. The new DIOND process operates at temperatures below 150 aegrees Farenheit, and has been used to nucleate and grow both diamondlike carbon and diamond films on a wide variety of optical :taterials including borosilicate glass, quartz glass, plastic, ZnS, ZnSe, Si, and Ge.

  19. Alternative theory of diffraction grating spectral device and its application for calculation of convolution and correlation of optical pulse signals

    Science.gov (United States)

    Kazakov, Vasily I.; Moskaletz, Dmitry O.; Moskaletz, Oleg D.

    2016-04-01

    A new, alternative theory of diffraction grating spectral device which is based on the mathematical analysis of the optical signal transformation from the input aperture of spectral device to result of photo detection is proposed. Exhaustive characteristics of the diffraction grating spectral device - its complex and power spread functions as the kernels of the corresponding integral operator, describing the optical signal transformation by spectral device is obtained. On the basis of the proposed alternative theory the possibility of using the diffraction grating spectral device for calculation of convolution and correlation of optical pulse signals is showed.

  20. Optical correlation using isotropic and anisotropic self diffraction using photorefractive material

    Science.gov (United States)

    Buranasiri, Prathan

    For two incident optical beams at different angles of incidence, a photorefractive cerium doped barium titanate crystal can facilitate different configurations of self-diffraction into higher orders. These configurations can be classified as isotropic and anisotropic, co-directional and contra-directional. Sometimes, a higher order resulting from an incident diverging object beam may comprise a converging beam, which then has the property of phase conjugation. Photorefractive fanning plays an important role in all these self-diffraction configurations. In this dissertation, we first explore the first higher order generated by forward three wave mixing. Only one higher order is observed when one of the incident beams is perpendicular to the surface of incidence. Not only the energy transfer via the first order grating has been observed but the energy transfer via the second order grating has been observed as well. With the angle between two incident beams less than 0.015 radians, the second configuration of self-diffraction has been investigated. With this configuration, codirectional isotropic self-diffraction (CODIS) and contradirectional isotropic self diffraction (CONDIS) have been observed. Phase conjugated beams which are responsible for CONDIS are the composite of mutual pumped phase conjugate (MPPC) and self pumped phase conjugate (SPPC). Due to the fanning effect, CONDIS usually forms before CODAS. In general, energy transfer between incident beams and CONDIS and CODIS occurs via first order and higher order gratings. For certain large but specific angles between the two incident extraordinarily polarized beams, it is possible to obtain anisotropic self-diffraction into ordinarily polarized higher orders. This third configuration for self-diffraction, called codirectional anisotropic self-diffraction (CODAS), can be generated most efficiently for the Bragg-matched case, although we have also observed CODAS with Bragg mismatch. In addition, CODAS has been

  1. Wave-guided Optical Waveguides tracked and coupled using dynamic diffractive optics

    DEFF Research Database (Denmark)

    Glückstad, Jesper; Villangca, Mark Jayson; Bañas, Andrew Rafael

    With light’s miniscule momentum, shrinking robotics down to the micro- and nano-scale regime creates opportunities for exploiting optical forces and near-field light delivery in advanced actuation and control atthe smallest physical dimensions. Advancing light-driven nano- or micro-actuation requ......With light’s miniscule momentum, shrinking robotics down to the micro- and nano-scale regime creates opportunities for exploiting optical forces and near-field light delivery in advanced actuation and control atthe smallest physical dimensions. Advancing light-driven nano- or micro......-actuation requires the optimization of optical forces and optical torques that, in turn, requires the optimization of the underlying light-matter interaction [1]. We have previously proposed and demonstrated micro-targeted light-delivery and the opto-mechanical capabilities of so-called wave-guided optical...

  2. Comparative study of iterative reconstruction algorithms for missing cone problems in optical diffraction tomography.

    Science.gov (United States)

    Lim, JooWon; Lee, KyeoReh; Jin, Kyong Hwan; Shin, Seungwoo; Lee, SeoEun; Park, YongKeun; Ye, Jong Chul

    2015-06-29

    In optical tomography, there exist certain spatial frequency components that cannot be measured due to the limited projection angles imposed by the numerical aperture of objective lenses. This limitation, often called as the missing cone problem, causes the under-estimation of refractive index (RI) values in tomograms and results in severe elongations of RI distributions along the optical axis. To address this missing cone problem, several iterative reconstruction algorithms have been introduced exploiting prior knowledge such as positivity in RI differences or edges of samples. In this paper, various existing iterative reconstruction algorithms are systematically compared for mitigating the missing cone problem in optical diffraction tomography. In particular, three representative regularization schemes, edge preserving, total variation regularization, and the Gerchberg-Papoulis algorithm, were numerically and experimentally evaluated using spherical beads as well as real biological samples; human red blood cells and hepatocyte cells. Our work will provide important guidelines for choosing the appropriate regularization in ODT.

  3. Evolution of the phase singularities in edge-diffracted optical-vortex beams

    CERN Document Server

    Bekshaev, Aleksandr; Chernykh, Aleksey; Khoroshun, Anna

    2016-01-01

    We study, both theoretically and by experiment, migration of the amplitude zeros within a fixed cross section of the edge-diffracted optical-vortex beam, when the screen edge performs permanent translation in the transverse plane from the beam periphery towards the axis. Generally, the amplitude zeros (optical-vortex cores) describe spiral-like trajectories. When the screen edge advances uniformly, the motion of the amplitude zeros is not smooth and sometimes shows anomalously high rates, which make an impression of instantaneous "jumps" from one position to another. We analyze the nature, conditions and mechanism of these jumps and show that they are associated with the "birth - annihilation" topological reactions involving the optical vortex dipoles.

  4. Fast spatial beam shaping by acousto-optic diffraction for 3D non-linear microscopy.

    Science.gov (United States)

    Akemann, Walther; Léger, Jean-François; Ventalon, Cathie; Mathieu, Benjamin; Dieudonné, Stéphane; Bourdieu, Laurent

    2015-11-01

    Acousto-optic deflection (AOD) devices offer unprecedented fast control of the entire spatial structure of light beams, most notably their phase. AOD light modulation of ultra-short laser pulses, however, is not straightforward to implement because of intrinsic chromatic dispersion and non-stationarity of acousto-optic diffraction. While schemes exist to compensate chromatic dispersion, non-stationarity remains an obstacle. In this work we demonstrate an efficient AOD light modulator for stable phase modulation using time-locked generation of frequency-modulated acoustic waves at the full repetition rate of a high power laser pulse amplifier of 80 kHz. We establish the non-local relationship between the optical phase and the generating acoustic frequency function and verify the system for temporal stability, phase accuracy and generation of non-linear two-dimensional phase functions.

  5. Generation of optical vortices with the same topological charges and controllable separation distances using diffraction gratings

    Science.gov (United States)

    Ghasempour Ardakani, Abbas; Safarzadeh, Fatemeh

    2016-08-01

    In this paper, we first generate optical vortices with different topological charges, using the method of computer-generated holograms. Then, we separate one of the optical vortices from others with a special topological charge and pass it through a diffraction grating with a specified line spacing. It is observed that the vortex beam, after passing through the grating, converts to several separated vortices with the same topological charge whose value is similar to the topological charge of the input vortex. Finally, we show that the distance between generated vortices can be controlled with the variation of spacing between grating lines. So, the proposed setup in this paper can be exploited as an optical vortex divider which is useful in communication and trapping systems.

  6. Optical analysis of spatially periodic patterns in nematic liquid crystals: diffraction and shadowgraphy.

    Science.gov (United States)

    Pesch, Werner; Krekhov, Alexei

    2013-05-01

    Optical methods are most convenient for analyzing spatially periodic patterns with wave vector q in a thin layer of a nematic liquid crystal. In the standard experimental setup a beam of parallel light with a "short" wavelength λ<2π/q passes the nematic layer. Recording the transmitted light the patterns are either directly visualized by shadowgraphy or characterized more indirectly by the diffraction fringes due to the optical-grating effects of the pattern. In this work we present a systematic short-wavelength analysis of these methods for the commonly used planar orientation of the optical axis of liquid crystal at the confining surfaces. Our approach covers general three-dimensional experimental geometries with respect to the relative orientation of q and of the wave vector k of the incident light. In particular, we emphasize the importance of phase-grating effects, which are not accessible in a pure geometric optics approach. Finally, as a by-product we present also an optical analysis of convection rolls in Rayleigh-Bénard convection, where the refraction index of the fluid is isotropic in contrast to its uniaxial symmetry in nematic liquid crystals. Our analysis is in excellent agreement with an earlier physical optics approach by Trainoff and Cannell [Phys. Fluids 14, 1340 (2002)], which is restricted to a two-dimensional geometry and technically much more demanding.

  7. Large Optical Telescope Based on High Efficiency Thin Film Planar Diffractive Optics Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In future ground-based receivers for deep-space optical communications with spacecraft, aperture diameters of the order of 10 meters are required even with the most...

  8. Development of multiple-surface optical elements for road lighting.

    Science.gov (United States)

    Kravchenko, Sergey V; Byzov, Egor V; Moiseev, Mikhail A; Doskolovich, Leonid L

    2017-02-20

    The development of LED secondary optics for road illumination is quite a challenging problem. Optical elements developed for this kind of application should have maximal efficiency, provide high luminance and illuminance uniformity, and meet many other specific requirements. Here, we demonstrate that the usage of the supporting quadric method modification enables generating free-form optical solution satisfying all these requirements perfectly. As an example, two optical elements for different roadway types are computed, manufactured by injection molding, and then measured in a photometry bench. Experimental data demonstrate that the obtained light distributions meet ME1 class requirements of EN 13201 standard. The obtained directivity patterns are universal and provide high performance with different configurations of luminaires' arrangement: the ratio of pole altitude to distance can vary from 2.5 up to 3.6.

  9. Acousto-optic method of spatial frequency filtration based on diffraction of two eigenmodes of a crystal

    Science.gov (United States)

    Kotov, V. M.; Averin, S. V.; Kuznetsov, P. I.; Kotov, E. V.

    2017-07-01

    A method is proposed for two-dimensional spatial frequency filtration based on acousto-optic (AO) diffraction of two eigenmodes of a crystal on a single acoustic wave. It is shown that AO filters, based on the use of such diffraction, ensure the enhancement of the two-dimensional image edge during its optical Fourier processing. The main theoretical conclusions are experimentally confirmed using an AO paratellurite filter.

  10. Military Specification, Mirror, Front Surfaced Aluminized: For Optical Elements

    Science.gov (United States)

    2007-11-02

    uniform magnesium fluoride or silicon monoxide or as otherwise specified on the applicable drawing. Tha film shall be free from holes, foreign...Mt] «. OATI Of IIMMIMION (YYMHDDt MIL-M-13508C AMENDMENT 1 27 May 1983 MILITARY SPECIFICATION MIRROR, FRONT SURFACED ALUMINIZED : FOR OPTICAL... ALUMINIZED : FOR OPTICAL ELEMENTS This notice should be filed in front of MIL-M-13508C, dated 19 March 1973 MIL-M-13508C dated 19 March 1973 with

  11. Multi-Element Electron-Transfer Optical Detector System

    Science.gov (United States)

    Jordan, Jeffrey D. (Inventor)

    2004-01-01

    A multi-element optical detector system includes an electrically resistive screen that is substantially transparent to radiation energy having a wavelength of interest. A plurality of electron transfer elements (e.g., a low work function photoactive material or a carbon nanotube (CNT)-based element) are provided with each having a first end and a second end. The first end of each element is spaced apart from the screen by an evacuated gap. When the radiation energy passes through the screen with a bias voltage applied thereto, transfer of electrons through each element is induced from the first end to the second end such that a quantity indicative of the electrons transferred through each element can be detected.

  12. Development of next-generation nanolithography methods to break the optical diffraction limit

    Science.gov (United States)

    Luo, Huiwen; Wang, Liang; Qin, Jin; Ding, Li

    2016-10-01

    Photolithography has been one of the most important technologies in modern society, especially in semiconductor industry. However, due to the limitation of optical diffraction, this technique becomes more and more complex and expensive. In this paper, we experimentally study two promising techniques, near-field scanning optical lithography and nanoimprint lithography, which both have been proved to be alternatives to photolithography, and achieve sub-wavelength resolution. Taking advantage of bowtie apertures, near-field scanning optical lithography can achieve high resolution beyond the Rayleigh diffractive limit. Here, we report a novel method to fabricate bowtie aperture with sub-15 nm gap, producing highly confined electric near-field by localized surface plasmon (LSP) excitation and nanofocusing of the closely tapered gap, and obtain lithography results with 21 nm resolution (FWHM).We also develop a new plate-to-roll nanoimprint lithography (P2RNIL). Compared with plate-to-plate nanoimprint lithography (P2PNIL) and roll-to-plate nanoimprint lithography (R2PNIL), it avoids cylinder template fabrication in P2RNIL and significantly improves the productivity in P2PNIL. Our P2RNIL system can realize large-area nanoimprint continuously with high resolution and high speed.

  13. Three-dimensional deep sub-diffraction optical beam lithography with 9 nm feature size.

    Science.gov (United States)

    Gan, Zongsong; Cao, Yaoyu; Evans, Richard A; Gu, Min

    2013-01-01

    The current nanofabrication techniques including electron beam lithography provide fabrication resolution in the nanometre range. The major limitation of these techniques is their incapability of arbitrary three-dimensional nanofabrication. This has stimulated the rapid development of far-field three-dimensional optical beam lithography where a laser beam is focused for maskless direct writing. However, the diffraction nature of light is a barrier for achieving nanometre feature and resolution in optical beam lithography. Here we report on three-dimensional optical beam lithography with 9 nm feature size and 52 nm two-line resolution in a newly developed two-photon absorption resin with high mechanical strength. The revealed dependence of the feature size and the two-line resolution confirms that they can reach deep sub-diffraction scale but are limited by the mechanical strength of the new resin. Our result has paved the way towards portable three-dimensional maskless laser direct writing with resolution fully comparable to electron beam lithography.

  14. Generation of Bessel Beams at mm- and Sub mm-wavelengths by Binary Optical Elements

    Science.gov (United States)

    Yu, Y. Z.; Dou, W. B.

    2008-07-01

    In this paper, binary optical elements (BOE’s) are designed for generating Bessel beams at mm- and sub mm- wavelengths. The design tool is to combine a genetic algorithm (GA) for global optimization with a two-dimension finite-difference time-domain (2-D FDTD) method for rigorous electromagnetic computation. The design process for converting a normally incident Gaussian beam into a Bessel beam is described in detail. Numerical results demonstrate that the designed BOE’s can not only successfully produce arbitrary order Bessel beams, but also have higher diffraction efficiencies when compared with amplitude holograms.

  15. Beam Size Measurement by Optical Diffraction Radiation and Laser System for Compton Polarimeter

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Chuyu [Peking Univ., Beijing (China)

    2012-12-31

    difficulty of diagnostics. For most cases, intercepting measurements are no longer acceptable, and nonintercepting method like synchrotron radiation monitor can not be applied to linear accelerators. The development of accelerator technology asks for simutanous diagnostics innovations, to expand the performance of diagnostic tools to meet the requirements of the next generation accelerators. Diffraction radiation and inverse Compton scattering are two of the most promising techniques, their nonintercepting nature avoids perturbance to the beam and damage to the instrumentation. This thesis is divided into two parts, beam size measurement by optical diffraction radiation and Laser system for Compton polarimeter. Diffraction radiation, produced by the interaction between the electric field of charged particles and the target, is related to transition radiation. Even though the theory of diffraction radiation has been discussed since 1960s, there are only a few experimental studies in recent years. The successful beam size measurement by optical diffraction radiation at CEBAF machine is a milestone: First of all, we have successfully demonstrated diffraction radiation as an effective nonintercepting diagnostics; Secondly, the simple linear relationship between the diffraction radiation image size and the actual beam size improves the reliability of ODR measurements; And, we measured the polarized components of diffraction radiation for the first time and I analyzed the contribution from edge radiation to diffraction radiation.

  16. Cubic optical elements for an accommodative intraocular lens.

    Science.gov (United States)

    Simonov, Aleksey N; Vdovin, Gleb; Rombach, Michiel C

    2006-08-21

    We present a new accommodative intraocular lens based on a two-element varifocal Alvarez lens. The intraocular lens consists of (1) an anterior element combining a spherical lens for refractive power with a cubic surface for the varifocal effect, and (2) a posterior element with a cubic surface only. The focal length of the IOL lens changes when the superimposed refractive elements shift in opposite directions in a plane perpendicular to the optical axis. The ciliary muscle will drive the accommodation by a natural process of contraction and relaxation. Results of ray-tracing simulations of the model eye with the two-element intraocular lens are presented for on-axis and off-axis vision. The configuration of the lens is optimized to reduce refractive errors as well as effects of misalignment. A prototype with a clear aperture of ~5.7 mm is manufactured and evaluated in air with a Shack-Hartmann wave-front sensor. It provides an accommodation range of ~4 dioptres in the eye at a ~0.75-mm lateral displacement of the optical elements. The experimentally measured on-axis optical performance of the IOL lens agrees with the theoretically predicted performance.

  17. A boundary element model for diffraction of water waves on varying water depth

    Energy Technology Data Exchange (ETDEWEB)

    Poulin, Sanne

    1997-12-31

    In this thesis a boundary element model for calculating diffraction of water waves on varying water depth is presented. The varying water depth is approximated with a perturbed constant depth in the mild-slope wave equation. By doing this, the domain integral which is a result of the varying depth is no longer a function of the unknown wave potential but only a function of position and the constant depth wave potential. The number of unknowns is the resulting system of equations is thus reduced significantly. The integration procedures in the model are tested very thoroughly and it is found that a combination of analytical integration in the singular region and standard numerical integration outside works very well. The gradient of the wave potential is evaluated successfully using a hypersingular integral equation. Deviations from the analytical solution are only found on the boundary or very close to, but these deviations have no significant influence on the accuracy of the solution. The domain integral is evaluated using the dual reciprocity method. The results are compared with a direct integration of the integral, and the accuracy is quite satisfactory. The problem with irregular frequencies is taken care of by the CBIEM (or CHIEF-method) together with a singular value decomposition technique. This method is simple to implement and works very well. The model is verified using Homma`s island as a test case. The test cases are limited to shallow water since the analytical solution is only valid in this region. Several depth ratios are examined, and it is found that the accuracy of the model increases with increasing wave period and decreasing depth ratio. Short waves, e.g. wind generated waves, can allow depth variations up to approximately 2 before the error exceeds 10%, while long waves can allow larger depth ratios. It is concluded that the perturbation idea is highly usable. A study of (partially) absorbing boundary conditions is also conducted. (EG)

  18. Overview of non-intercepting beam-size monitoring with optical diffraction radiation

    CERN Document Server

    Lumpkin, Alex H

    2012-01-01

    The initial demonstrations over the last several years of the use of optical diffraction radiation (ODR) as non-intercepting electron-beam-parameter monitors are reviewed. Developments in both far-field imaging and near-field imaging are addressed for ODR generated by a metal plane with a slit aperture, a single metal plane, and two-plane interferences. Polarization effects and sensitivities to beam size, divergence, and position will be discussed as well as a proposed path towards monitoring 10-micron beam sizes at 25 GeV.

  19. Overview of nonintercepting beam-size monitoring with optical diffraction radiation

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, Alex H.; /Fermilab

    2010-08-01

    The initial demonstrations over the last several years of the use of optical diffraction radiation (ODR) as nonintercepting electron-beam-parameter monitors are reviewed. Developments in both far-field imaging and near-field imaging are addressed for ODR generated by a metal plane with a slit aperture, a single metal plane, and two-plane interferences. Polarization effects and sensitivities to beam size, divergence, and position will be discussed as well as a proposed path towards monitoring 10-micron beam sizes at 25 GeV.

  20. Single-element Electron-transfer Optical Detector System

    Science.gov (United States)

    Jordan, Jeffrey D. (Inventor)

    2004-01-01

    An optical detector system includes an electrically resistive screen that is substantially transparent to radiation energy having a wavelength of interest. An electron transfer element (e.g., a low work function photoactive material or a carbon nanotube (CNT)-based element) has a first end and a second end with its first end spaced apart from the screen by an evacuated gap. When radiation energy passes through the screen with a bias voltage being applied thereto, transfer of electrons through the electron transfer element is induced from its first to its second end such that a quantity indicative of the electrons transferred can be detected.

  1. The optical length effect, diffraction pattern and thermal lensing of Disperse Orange 25

    Science.gov (United States)

    Salmani, S.; Ara, M. H. Majles

    2016-08-01

    The nonlinear responses of an azo dye, Disperse Orange 25 (DO25), are investigated under two irradiation of continuous Lasers at 532 and 632 nm wavelengths and the third order refractive index is measured by use of Z-scan technique. At 632 nm wavelength (far from the absorption peak), the close z-scan plots show that this material has a very good nonlinear response with negative sign indicating self-defocusing. The effect of optical length and concentration of samples in nonlinear responses have been investigated experimentally. Also, the radius variation at far field observed due to thermal lens effect. Finally, at other wavelength, 532 nm (near from the absorption peak), the nonlinear optical responses increase sharply so the diffraction rings appear and the numbers of rings increase with the incident laser power.

  2. Transition operators in electromagnetic-wave diffraction theory. II - Applications to optics

    Science.gov (United States)

    Hahne, G. E.

    1993-01-01

    The theory developed by Hahne (1992) for the diffraction of time-harmonic electromagnetic waves from fixed obstacles is briefly summarized and extended. Applications of the theory are considered which comprise, first, a spherical harmonic expansion of the so-called radiation impedance operator in the theory, for a spherical surface, and second, a reconsideration of familiar short-wavelength approximation from the new standpoint, including a derivation of the so-called physical optics method on the basis of quasi-planar approximation to the radiation impedance operator, augmented by the method of stationary phase. The latter includes a rederivation of the geometrical optics approximation for the complete Green's function for the electromagnetic field in the presence of a smooth- and a convex-surfaced perfectly electrically conductive obstacle.

  3. Wave front sensor based on holographic optical elements

    Science.gov (United States)

    Kovalev, M. S.; Krasin, G. K.; Malinina, P. I.; Odinokov, S. B.; Sagatelyan, H. R.

    2016-08-01

    A wavefront sensor (WFS) based on holographic optical elements, namely computer generated Fourier holograms is proposed as a perspective alternative to the Shack-Hartmann sensor. A possibility of single and multimode sensor and the dependence of their characteristics were investigated.

  4. Analog of Optical Elements for Sound Waves in Air

    Science.gov (United States)

    Gluck, Paul; Perkalskis, Benjamin

    2009-01-01

    Optical elements manipulate light waves. They may be used to focus the light or to change the phase, the polarization, the direction, or the intensity of light. Many of these functions are often demonstrated with microwaves, since the devices normally available in teaching laboratories produce wavelengths in the centimeter range and are therefore…

  5. Finite Element Studies Of Tangent Mounted Conical Optics

    Science.gov (United States)

    Stoneking, J.; Casstevens, J.; Stillman, D.

    1982-12-01

    This paper presents experimental and analytical results from a study investigating the effect of centrifugal force and gravity on two candidate mirror fixture designs to be used on a diamond-turning ma-chine. The authors illustrate and discuss the use of the finite element method as an aid in the design and fabrication of high precision metallic optical components.

  6. Hyperbranched-polymer dispersed nanocomposite volume gratings for holography and diffractive optics

    Science.gov (United States)

    Tomita, Yasuo; Takeuchi, Shinsuke; Oyaizu, Satoko; Urano, Hiroshi; Fukamizu, Taka-aki; Nishimura, Naoya; Odoi, Keisuke

    2016-10-01

    We review our experimental investigations of photopolymerizable nanoparticle-polymer composites (NPCs) for holography and diffractive optics. Various types of hyperbranched polymer (HBP) were systhesized and used as transporting organic nanoparticles. These HBPs include hyperbranched poly(ethyl methacrylate) (HPEMA), hyperbranched polystyrene (HPS) and hyperbranched triazine/aromatic polymer units (HTA) whose refractive indices are 1.51, 1.61 and 1.82, respectively. Each HBP was dispersed in (meth)acrylate monomer whose refractive index was so chosen that a refractive index difference between HBP and the formed polymer was large. Such monomer-HBP syrup was mixed with a titanocene photoinitiator for volume holographic recording in the green. We used a two-beam interference setup to write an unslanted transmission volume grating at grating spacing of 1 μm and at a wavelength of 532 nm. It is shown that NPC volume gratings with the saturated refractive index modulation amplitudes as large as 0.008, 0.004 and 0.02 can be recorded in NPCs incorporated with HPEMA, HPS and HTA at their optimum concentrations of 34, 34 and 25 vol.%, respectively. We show the usefulness of HBP-dispersed NPC volume gratings for holographic applications such as holographic data storage and diffractive optical devices.

  7. Diffraction phenomenon in optical history and textbooks: Reflections on learning difficulties

    Directory of Open Access Journals (Sweden)

    Silvia Bravo

    2015-08-01

    Full Text Available This paper addresses the difficulties showed by students in the paradigm shift between geometrical optics and wave optics. It tries to interpret its origin at the university level. The research focuses on two aspects: the similarity between the fundamental ideas in the history of science and students conceptions, and the logical development of the issue in textbooks. A historical review of theories about the nature of light is developed analyzing the role of diffraction phenomenon in the paradigm shift. A characterization of the development of optics in major textbooks at university level is then performed, focusing the analysis on the way wave optics is introduced and develop. The results indicate some parallelism between students difficulties and the difficulties experienced by the scientific community in order to accept the wave model. The analysis of textbooks showed that the developmental sequence of topics and some representations used can sometimes reinforce the uncritical use of the ray-model. Finally, it is marked the importance that teachers take into account students difficulties and the interpretations about its origin for the design of educational activities and proposals.

  8. Diffractive lenses recorded in absorbent photopolymers.

    Science.gov (United States)

    Fernández, R; Gallego, S; Márquez, A; Francés, J; Navarro-Fuster, V; Pascual, I

    2016-01-25

    Photopolymers can be appealing materials for diffractive optical elements fabrication. In this paper, we present the recording of diffractive lenses in PVA/AA (Polyvinyl alcohol acrylamide) based photopolymers using a liquid crystal device as a master. In addition, we study the viability of using a diffusion model to simulate the lens formation in the material and to study the influence of the different parameters that govern the diffractive formation in photopolymers. Once we control the influence of each parameter, we can fit an optimum recording schedule to record each different diffractive optical element with the optimum focalization power.

  9. Quantifying the polarization properties of non-depolarizing optical elements with virtual distorting elements.

    Science.gov (United States)

    Wang, Xiao; Yang, Feng; Yin, Jianhua

    2017-04-01

    It is well known that polarization can be potentially distorted by optical elements in optical paths, which intensively influences researches and techniques related to polarization analysis. For this, we proposed to exactly quantify the polarization properties of non-depolarizing optical elements with virtual distorting elements characterized by three parameters: orientation Θ, diattenuation Γ, and retardation Δ. Utilizing the least-squares fitting method, these three parameters can be determined by fitting the measured output polarization states from the optical element with the polarization responses of VDEs. The principle of this method is detailed, and a corresponding experimental setup is further presented. The feasibility of this method has been verified in reflective mirrors and a dichroic mirror. Based on the quantification results with our setup, we have successfully compensated the polarization distortion induced by a dichroic mirror. The precision of this method has been investigated in detail with Monte Carlo simulations. The investigation results show that this method has high precision at certain measurement conditions, and the precision can be further improved.

  10. High Capacity High Speed Optical Data Storage System Based on Diffraction-Free Nanobeam. Final Report, 09-02-98 to 03-17-99

    Energy Technology Data Exchange (ETDEWEB)

    Tin Aye

    1999-06-16

    Physical Optics Corporation (POC) investigated the development of an optical data storage system built around a current well-engineered high-speed optical disk system with an innovative diffraction-free micro-optical element to produce a beam {approximately}250 nm wide with {approximately}4-5 mm depth of focus, allowing the system to address data at {approximately}100 Mbits/second and to store it 100 to 1,000 times more densely ({approximately}10 Gbit/in.{sup 2}) than in present systems. In Phase 1 of this project POC completed a thorough feasibility study by system design and analysis, successfully demonstrated fabrication of the key components, and conducted a proof-of-principle experimental demonstration. Specifically, production of a subwavelength ({approximately}380 nm) large depth of focus ({approximately}4-5 mm) addressing beam was demonstrated by fabricating a special microdiffractive optical element and recording this beam on a standard optical recording disk coated with a photopolymer material.

  11. Large Aperture Scanning Lidar Based on Holographic Optical Elements

    Science.gov (United States)

    Schwemmer, Geary K.; Miller, David O.; Wilkerson, Thomas D.; Andrus, Ionio; Guerra, David V.; Einaudi, Franco (Technical Monitor)

    2001-01-01

    Lidar remote sensing instruments can make a significant contribution to satisfying many of the required measurements of atmospheric and surface parameters for future spaceborne platforms, including topographic altimeters, atmospheric profiles of, wind, humidity, temperature, trace molecules, aerosols, and clouds. It is highly desirable to have wide measurement swaths for rapid coverage rather than just the narrow ribbon of data that is obtained with a nadir only observation. For most applications global coverage is required, and for wind measurements scanning or pointing is required in order to retrieve the full 3-D wind vector from multiple line-of-sight Doppler measurements. Conventional lidar receivers make up a substantial portion of the instrument's size and weight. Wide angle scanning typically requires a large scanning mirror in front of the receiver telescope, or pointing the entire telescope and aft optics assembly, Either of these methods entails the use of large bearings, motors, gearing and their associated electronics. Spaceborne instruments also need reaction wheels to counter the torque applied to the spacecraft by these motions. NASA has developed simplified conical scanning telescopes using Holographic Optical Elements (HOEs) to reduce the size, mass, angular momentum, and cost of scanning lidar systems. NASA has developed two operating lidar systems based on 40 cm diameter HOEs. The first such system, named Prototype Holographic Atmospheric Scanner for Environmental Remote Sensing (PHASERS) was a joint development between NASA Goddard Space Flight Center (GSFC) and the University of Maryland College Park. PHASERS is based on a reflection HOE for use at the doubled Nd:YAG laser wavelength of 532 nm and has recently undergone a number of design changes in a collaborative effort between GSFC and Saint Anselm College in New Hampshire. The next step was to develop IR transmission HOEs for use with the Nd:YAG fundamental in the Holographic Airborne

  12. Optical modulation study of repaired damage morphologies of fused silica by scalar diffraction theory

    Science.gov (United States)

    Li, Bo; Zhou, Qingyan; Jiang, Yong; Xiang, Xia; Liao, Wei; Jiang, Xiaolong; Wang, Haijun; Luan, Xiaoyu; Zheng, Wanguo; Yuan, Xiaodong

    2017-01-01

    The cone and Gaussian repaired damage craters are two typical morphologies induced by CO2 laser evaporation and nonevaporation technologies. The mathematical models are built for these two types of repaired craters, and the light modulation at 355 nm induced by the millimeter-scale repaired damage morphology is studied by scalar diffraction theory. The results show that the modulation of the Gaussian repaired morphology has one peak and then decreases with the increasing distance from 0 to 30 cm. While the modulation for cone repaired morphology remains stable after decreasing quickly with the increasing distance. When the horizontal radius increases, the modulation looks like a saw-tooth. However, the modulation has irregular variations for two kinds of morphologies with the increasing vertical depth. The simulated results agree well with experimental results. The horizontal and vertical dimensions, and downstream distance have different influences on the modulation. The risk of damage to downstream optical components can be suppressed to improve the stability of the optical system if the shape and size of repaired craters are well controlled and the positions of downstream optical components are selected appropriately.

  13. Method of Bonding Optical Elements with Near-Zero Displacement

    Science.gov (United States)

    Robinson, David; McClelland, Ryan; Byron, Glenn; Evans, Tyler

    2012-01-01

    The International X-ray Project seeks to build an x-ray telescope using thousands of pieces of thin and flexible glass mirror segments. Each mirror segment must be bonded into a housing in nearly perfect optical alignment without distortion. Forces greater than 0.001 Newton, or displacements greater than 0.5 m of the glass, cause unacceptable optical distortion. All known epoxies shrink as they cure. Even the epoxies with the least amount of shrinkage (<0.01%) cause unacceptable optical distortion and misalignment by pulling the mirror segments towards the housing as it cures. A related problem is that the shrinkage is not consistent or predictable so that it cannot be accounted for in the setup (i.e., if all of the bonds shrunk an equal amount, there would be no problem). A method has been developed that allows two components to be joined with epoxy in such a way that reduces the displacement caused by epoxy shrinking as it cures to less than 200 nm. The method involves using ultraviolet-cured epoxy with a displacement sensor and a nanoactuator in a control loop. The epoxy is cured by short-duration exposures to UV light. In between each exposure, the nano-actuator zeroes out the displacement caused by epoxy shrinkage and thermal expansion. After a few exposures, the epoxy has cured sufficiently to prevent further displacement of the two components. Bonding of optical elements has been done for many years, but most optics are thick and rigid elements that resist micro-Newton-level forces without causing distortion. When bonding thin glass optics such as the 0.40-mm thick IXO X-ray mirrors, forces in the micro- and milli-Newton levels cause unacceptable optical figure error. This innovation can now repeatedly and reliably bond a thin glass mirror to a metal housing with less than 0.2 m of displacement (<200 nm). This is an enabling technology that allows the installation of virtually stress-free, undistorted thin optics onto structures. This innovation is

  14. Finite Element Simulation of the Optical Modes of Semiconductor Lasers

    CERN Document Server

    Pomplun, J; Schmidt, F; Schliwa, A; Bimberg, D; Pietrzak, A; Wenzel, H; Erbert, G; 10.1002/pssb.200945451

    2010-01-01

    In the present article we investigate optical near fields in semiconductor lasers. We perform finite element simulations for two different laser types, namely a super large optical waveguide (SLOW) laser, which is an edge emitter, and a vertical cavity surface emitting laser (VCSEL). We give the mathematical formulation of the different eigenvalue problems that arise for our examples and explain their numerical solution with the finite element method. Thereby, we also comment on the usage of transparent boundary conditions, which have to be applied to respect the exterior environment, e.g., the very large substrate and surrounding air. For the SLOW laser we compare the computed near fields to experimental data for different design parameters of the device. For the VCSEL example a comparison to simplified 1D mode calculations is carried out.

  15. Integration of refractive micro-optical elements with differential-pair optical-thyristor arrays.

    Science.gov (United States)

    Passon, C; Moisel, J; McArdle, N; Eckert, W; Brenner, K H; Kuijk, M; Heremans, P

    1996-03-10

    We demonstrate a refractive micr-optical system by using ion-exchange microlenses and microprisms, which are combined to generate a superposition of two shifted images. The microlenses, fabricated with field-assisted Ag-Na exchange, achieve diffraction-limited imaging with a single-lens system and with a double-lens system for a field of 800 µm × 800 µm. Furthermore, we demonstrate cascading of two separate differential-pair optical-thyristor arrays by transcribing the information of a source array onto a second destination array.

  16. Implement Quantum Random Walks with Linear Optics Elements

    CERN Document Server

    Zhao, Z; Li, H; Yang, T; Chen, Z B; Pan, J W; Zhao, Zhi; Du, Jiangfeng; Li, Hui; Yang, Tao; Chen, Zeng-Bing; Pan, Jian-Wei

    2002-01-01

    The quantum random walk has drawn special interests because its remarkable features to the classical counterpart could lead to new quantum algorithms. In this paper, we propose a feasible scheme to implement quantum random walks on a line using only linear optics elements. With current single-photon interference technology, the steps that could be experimentally implemented can be extended to very large numbers. We also show that, by decohering the quantum states, our scheme for quantum random walk tends to be classical.

  17. Finite element analysis of thermal stresses in optical storage media

    Science.gov (United States)

    Evans, K. E.; Nkansah, M. A.; Abbott, S. J.

    1988-10-01

    Finite element techniques are used to calculate the thermal stresses generated in single-layer, optical storage thin films. The calculations predict that the thermal stresses generated by laser heating may reach values well beyond the strength of the media in times much less than that for pit formation by melting. Both dye-polymer and metal-based systems are considered with either air or substrate incident laser sources.

  18. Optical second-harmonic diffraction study of anisotropic surface diffusion: CO on Ni(110)

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, X.; Zhu, X.D.; Daum, W.; Shen, Y.R. (Department of Physics, University of California, Materials Sciences Division, Lawrence Berkeley Laboratory, Berkeley, California 94720 (United States))

    1992-10-15

    We describe in detail a technique using optical second-harmonic (SH) diffraction from a one-dimensional laser-induced monolayer grating to probe surface diffusion of adsorbates and its anisotropy on a solid surface. The case of CO on Ni(110) is used as a demonstration. The two orthogonal and independent diffusion tensor components along (1{bar 1}0) and (001) are measured, exhibiting a strong anisotropy in both the activation energy {ital E}{sub diff} and the preexponential factor {ital D}{sub 0} in the diffusion coefficients. A compensation effect between {ital E}{sub diff} and {ital D}{sub 0} is observed. In comparison with CO/Ni(111) and CO/Ni(100), our result suggests that the Ni(110) surface seen by CO is much smoother than Ni(111) and Ni(100). Both advantages and limitations of the present technique are mentioned and possible complications in the data analysis are discussed.

  19. Fabrication of Vertically Aligned Carbon Nanotube or Zinc Oxide Nanorod Arrays for Optical Diffraction Gratings.

    Science.gov (United States)

    Kim, Jeong; Kim, Sun Il; Cho, Seong-Ho; Hwang, Sungwoo; Lee, Young Hee; Hur, Jaehyun

    2015-11-01

    We report on new fabrication methods for a transparent, hierarchical, and patterned electrode comprised of either carbon nanotubes or zinc oxide nanorods. Vertically aligned carbon nanotubes or zinc oxide nanorod arrays were fabricated by either chemical vapor deposition or hydrothermal growth, in combination with photolithography. A transparent conductive graphene layer or zinc oxide seed layer was employed as the transparent electrode. On the patterned surface defined using photoresist, the vertically grown carbon nanotubes or zinc oxides could produce a concentrated electric field under applied DC voltage. This periodic electric field was used to align liquid crystal molecules in localized areas within the optical cell, effectively modulating the refractive index. Depending on the material and morphology of these patterned electrodes, the diffraction efficiency presented different behavior. From this study, we established the relationship between the hierarchical structure of the different electrodes and their efficiency for modulating the refractive index. We believe that this study will pave a new path for future optoelectronic applications.

  20. High-resolution diffraction X-ray optics%高分辨率X射线衍射光学元件

    Institute of Scientific and Technical Information of China (English)

    Alexei Erko; Alexander Firsov

    2007-01-01

    A review of different diffraction optical elements developed at BESSY for X-ray focusing is presented.Bragg-Fresnel optics as a basic element to design effective and high resolution X-ray focusing and dispersive X-ray optics is discussed.An experimental investigation of the combination of a long focal distance Bragg-Fresnel lens with a bimorph mirror is described.A reflection Fresnel zone plate has been tested as a focusing and dispersion optical element for X-ray Absorption Spectroscopy (XAS)on short-time pulse beamline.%评述了BESSY研制的用于X射线聚焦的各种衍射光学元件.基于布拉格-菲涅耳光学元件,设计了高效高分辨率X射线聚焦和色散光学元件.描述了对长焦距布拉格-菲涅耳透镜与可变曲率半径反射镜组合所做的实验研究.用一块反射菲涅耳波带板作聚焦和色散光学元件进行了短脉冲X射线吸收谱(XAS)的测量.

  1. Temperature control system for optical elements in astronomical instrumentation

    Science.gov (United States)

    Verducci, Orlando; de Oliveira, Antonio C.; Ribeiro, Flávio F.; Vital de Arruda, Márcio; Gneiding, Clemens D.; Fraga, Luciano

    2014-07-01

    Extremely low temperatures may damage the optical components assembled inside of an astronomical instrument due to the crack in the resin or glue used to attach lenses and mirrors. The environment, very cold and dry, in most of the astronomical observatories contributes to this problem. This paper describes the solution implemented at SOAR for remotely monitoring and controlling temperatures inside of a spectrograph, in order to prevent a possible damage of the optical parts. The system automatically switches on and off some heat dissipation elements, located near the optics, as the measured temperature reaches a trigger value. This value is set to a temperature at which the instrument is not operational to prevent malfunction and only to protect the optics. The software was developed with LabVIEWTM and based on an object-oriented design that offers flexibility and ease of maintenance. As result, the system is able to keep the internal temperature of the instrument above a chosen limit, except perhaps during the response time, due to inertia of the temperature. This inertia can be controlled and even avoided by choosing the correct amount of heat dissipation and location of the thermal elements. A log file records the measured temperature values by the system for operation analysis.

  2. Deformation analysis of optical flat surface with finite element method

    Science.gov (United States)

    Fu, Pengqiang; Ren, Boyuan; Wang, Yiwen; Zhang, Dewei; Zhang, Longjiang; Su, Xing

    2016-10-01

    Proposing a new method for testing the ultra-precision aerostatic spindle motion accuracy based on analyzing the online real-time dynamic interference image. Optical flat crystal as the testing standard will be installed at the end of the ultra precision aerostatic spindle and will motion along with the spindle. On the other end of the spindle, the tool will be installed for online processing. The image data of optical flat crystal collected by the high-precision dynamic interferometer will be processed for analyzing the spindle error. For collecting higher accuracy image data, the installation way of optical flat crystal is one of the key technologies. Base on this, the effects of the clamping means on the surface accuracy of optical flat crystal is studied. At first, the finite element model of the optical flat crystal`s clamping structure were established. Secondly, the influence of the material of the supporting annulus, preload lateral clamping and spindle speed on the surface accuracy of optical flat crystal had been analyzed. At last, the improved and optimized structure of the optical flat crystal has been presented. As the analysis results shown, the RMS value of reference surface is 9.47nm and the deformation values of the central region is 0.17nm which satisfies the requirement of surface accuracy and installation of optical flat crystal. It has a very important theoretical and practical significance to establish spindle online testing system and research rotary error generating mechanism of ultra-precision spindle to improve surface accuracy of ultra-precision machining.

  3. Diffraction model analysis of pion-12C elastic scattering at 800 MeV/c: Optical potential by inversion

    Indian Academy of Sciences (India)

    I Ahmad; M R Arafah

    2006-03-01

    Elastic scattering of 800 MeV/c pions by 12C has been studied in the diffraction model with a view to determine pion optical potential by the method of inversion. Finding an earlier diffraction model analysis to be deficient in some respects, we propose a Glauber model based parametrization for the elastic -matrix and show that it provides an exceedingly good fit to the pion-carbon data. The proposed elastic -matrix gives a closed expression for the pion-12C optical potential by the method of inversion in the high energy approximation.

  4. Optical sub-diffraction limited focusing for confined heating and lithography

    Science.gov (United States)

    Traverso, Luis M.

    Electronics and nanotechnology is constantly demanding a decrease in size of fabricated nanoscale features. This decrease in size has become much more difficult recently due to the limited resolution of optical systems that are fundamental to many nanofabrication methods. A lot of effort has been made to fabricate devices smaller than the diffraction limit of light. Creating devices that are capable of confining fields by means of interference patterns of propagating wave modes and surface plasmon, has proven successful to confine light into smaller spot sizes. Zone plate diffraction lenses generate spots with dimensions very close to the diffraction limit. We report the fabrication of zone plates to be used in laser direct writing of silicon nanowires. We show experimentally and with numerical models that a silicon substrate subjected to a focused spot is capable of reaching the necessary temperature for the synthesis of silicon nanowires with widths of 60 nm, which is considerably smaller than the diffraction limit of the processing laser. Nanoscale ridge apertures are devices with a great potential to confine light energy. Such apertures have been experimentally proven to create very small lithography features. We believe that these apertures can be further modified in order to achieve a practical smaller confinement in the near field region. In this thesis we discuss several attempts to design and fabricate apertures with sharp edges and implement them in a previously reported parallel lithography setup. In an attempt to use apertures for parallel fabrication of patterns, we developed a system to control the position of the near-field region with respect to a lithography substrate. To do this we use a method of interferometric-spatial- phase-imaging (ISPI). With the implementation of this method we were able to produce an array of 32X32 lines with confined widths as small as 22 nm. Nanoscale ridge apertures were also studied to be used as near field transducers

  5. Optical Absorption and X—Ray DIffractionStudies of Sulfur Under High Pressure

    Institute of Scientific and Technical Information of China (English)

    陈良辰; 王莉君

    1999-01-01

    In situ high pressure optical absorption measurements of sulfur have been carried out by using DAC device with a TASCO V-550 UV-VIS spectrophotometer at pressures up to 41.6GPa.The curves of absorption edge vs pressure were obtained.in which there are two turning points at about 5 and 12GPa,corresponding to two changes of colour in the optical observation:one is from yellow to red and the other from red to black at 5-6\\5and 10-12GPa,respectively.The absorption edge reaches above 800nm when the pressure is increased to 23GPa.The sturcture and phase transitions have also been investigated by using in situ high pressure energy-dispersive x-ray diffraction with synchrotron radiation at pressures up to 33.7GPa.No structure phase transition occurs at 5-6GPa.but there is a new high-pressure phase,caused probably by the reorientation or ordering of S8.

  6. Fabrication of diffractive optical components for an extreme ultraviolet shearing interferometer

    Energy Technology Data Exchange (ETDEWEB)

    Spector, S.J. (Department of Physics, State University of New York at Stony Brook, Stony Brook, New York 11794 (United States)); Tennant, D.M. (AT T Bell Laboratories, Holmdel, New Jersey 07733 (United States)); Tan, Z. (AT T Bell Laboratories, 510E Brookhaven National Laboratory, Upton, New York 11973 (United States)); Bjorkholm, J.E. (AT T Bell Laboratories, Holmdel, New Jersey 07733 (United States))

    1994-11-01

    We have constructed four optical components for use in an extreme ultraviolet shearing interferometer which will operate at a wavelength of 13.4 nm. The components that have been constructed include transmission diffractive optical components such as a Fresnel zone plate, angled gratings, and two-frequency gratings, as well as pinhole apertures. All the components are fabricated in 110 nm of Ge, which is supported by a 0.5--0.7-[mu]m-thick membrane of Si. The patterns were fabricated by first evaporating Ge and then spinning 100 nm polymethylmethacrylate (PMMA) onto the Si membranes. The desired patterns were exposed in the PMMA resist using electron beam lithography. Custom interative computer programs generated the patterns used to control the exposure. After developing the PMMA resist the Ge layer was etched using a reactive ion etching technique. Electron microscopy of the finished components show that the smallest features in our components are cleanly constructed, and the linewidths and placement of the features meet the desired accuracy.

  7. Spatial optical modulator (SOM): high-density diffractive laser projection display

    Science.gov (United States)

    Yun, SangKyeong; Song, JongHyeong; Yeo, InJae; Choi, YoonJoon; Yurlov, Victor; An, SeungDo; Park, HeungWoo; Yang, HaengSeok; Lee, YeongGyu; Han, KyuBum; Shyshkin, Ihar; Lapchuk, Anatoliy; Oh, KwanYoung; Ryu, SeungWon; Jang, JaeWook; Park, ChangSu; Kim, ChunGi; Kim, SunKi; Kim, EungJu; Woo, KiSuk; Yang, JeongSuong; Kim, EuiJoong; Kim, JooHong; Byun, SungHo; Lee, SeungWoo; Lim, OhkKun; Cheong, JongPil; Hwang, YoungNam; Byun, GiYoung; Kyoung, JeHong; Yoon, SangKee; Lee, JaeKwang; Lee, TaeWon; Hong, SeokKee; Hong, YoonShik; Park, DongHyun; Kang, JungChul; Shin, WooChul; Lee, SungIl; Oh, SungKyung; Song, ByungKi; Kim, HeeYeoun; Koh, ChongMann; Ryu, YungHo; Lee, HyunKee; Baek, YoungKi

    2007-02-01

    A new type of diffractive spatial optical modulators, named SOM, has been developed by Samsung Electro-Mechanics for laser projection display. It exhibit inherent advantages of fast response time and high-performance light modulation, suitable for high quality embedded laser projection displays. The calculated efficiency and contrast ratio are 75 % and 800:1 respectively in case of 0 th order, 67 % and 1000:1 respectively in case of +/-1st order. The response time is as fast as 0.7 μs. Also we get the displacement of 400 nm enough to display full color with single panel in VGA format, as being 10 V driven. Optical module with VGA was successfully demonstrated for its potential applications in mobile laser projection display such as cellular phone, digital still camera and note PC product. Electrical power consumption is less than 2 W, volume is less than 13 cc. Brightness is enough to watch TV and movie in the open air, being variable up to 6 lm. Even if it's optimal diagonal image size is 10 inch, image quality does not deteriorate in the range of 5 to 50 inch because of the merit of focus-free. Due to 100 % fill factor, the image is seamless so as to be unpleasant to see the every pixel's partition. High speed of response time can make full color display with 24-bit gray scale and cause no scan line artifact, better than any other devices.

  8. Micro-optical elements and optical materials of certain spider webs

    Science.gov (United States)

    Kane, D. M.; Naidoo, N.; Little, D. J.

    2012-06-01

    Certain spider webs are composed of several types of micro-optical elements made from transparent optical materials. The silks (radial and capture) are almost exclusively protein. The nearly cylindrical silks have diameters in the range 0.1 to several microns and cross-sectional morphology that is cylindrical-multi-layered,.as studied by transmission electron microscopy, The capture threads are coated with aqueous adhesive that also forms into nearly elliptical micro-lenses (adhesive droplets) mounted on the near cylindrical silks. The remaining elements of the web are the cement junctions tying the radial and the capture threads of the web together. These are irregularly shaped platelets. Progress to date on our research characterizing the optical properties and function of these transparent orb webs has been to interpret the reflection and transmission properties of the elements of the web, and the web as a whole, in natural lighting; to evaluate the optical finish of the surface of the silks and capture droplets; and to measure the principal refractive indices of radial silks using new immersion based methods developed for application to micron-sized, curved optical elements. Here we report the principal refractive indices, birefringence, dispersion and morphology of transparent spider silk subject to various chemical treatments. The morphology is measured using TEM. Insight into the physical origin of the refractive index properties will be discussed.

  9. Bioinspired micrograting arrays mimicking the reverse color diffraction elements evolved by the butterfly Pierella luna

    OpenAIRE

    England, Grant Tyler; Kolle, Mathias; Kim, Philseok; Khan, Mughees; Munoz, Philip Alejandro; Mazur, Eric; Aizenberg, Joanna

    2014-01-01

    In the course of evolution, many organisms have developed unique light manipulation strategies that rely on intriguing combinations of a broad range of optical effects generated by materials with sophisticated multiscale hierarchical structural arrangements. By exploiting the optical principles underlying natural structural color, we can generate new photonic materials. Researchers have only just begun to match nature’s morphological and compositional complexity in man-made materials using na...

  10. Optical electromagnetic vector-field modeling for the accurate analysis of finite diffractive structures of high complexity

    DEFF Research Database (Denmark)

    Dridi, Kim; Bjarklev, Anders Overgaard

    1999-01-01

    An electromagnetic vector-field modle for design of optical components based on the finite-difference-time-domain method and radiation integrals in presented. Its ability to predict the optical electromagnetic dynamics in structures with complex material distribution is demonstrated. Theoretical...... and numerical investigations of finite-length surface-relief structures embedded in polymer dielectric waveguiding materials are presented. The importance of several geometric parameter dependencies is indicated as far-field power distributions are rearranged between diffraction orders. The influences...

  11. X-ray diffraction study on the thermal properties of CuMPt6 (M= 3d elements) alloys

    OpenAIRE

    2009-01-01

    The effect of ternary addition of the 3d elements Ti, V, Cr, Mn, Fe, Co and Ni to CuPt3 to form ternary CuMPt6 alloys on the thermal properties was investigated using high-temperature X-ray diffraction method. Data obtained were utilized to determine the lattice parameters, coefficients of thermal expansion, Debye temperature and mean-square displacements of an atom. It was found that the addition increases the lattice spacing, increases the degree of thermal expansion and lowers the Debye te...

  12. X-ray fluorescence and energy dispersive x-ray diffraction for the quantification of elemental concentrations in breast tissue.

    Science.gov (United States)

    Geraki, K; Farquharson, M J; Bradley, D A

    2004-01-07

    This paper presents improvements on a previously reported method for the measurement of elements in breast tissue specimens (Geraki et al 2002 Phys. Med. Biol. 47 2327-39). A synchrotron-based system was used for the detection of the x-ray fluorescence (XRF) emitted from iron, copper, zinc and potassium in breast tissue specimens, healthy and cancerous. Calibration models resulting from the irradiation of standard aqueous solutions were used for the quantification of the elements. The present developments concentrate on increasing the convergence between the tissue samples and the calibration models, therefore improving accuracy. For this purpose the composition of the samples in terms of adipose and fibrous tissue was evaluated, using an energy dispersive x-ray diffraction (EDXRD) system. The relationships between the attenuation and scatter properties of the two tissue components and water were determined through Monte Carlo simulations. The results from the simulations and the EDXRD measurements allowed the XRF data from each specimen to be corrected according to its composition. The statistical analysis of the elemental concentrations of the different groups of specimens reveals that all four elements are found in elevated levels in the tumour specimens. The increase is less pronounced for iron and copper and most for potassium and zinc. Other observed features include the substantial degree of inhomogeneity of elemental distributions within the volume of the specimens, varying between 4% and 36% of the mean, depending on the element and the type of the sample. The accuracy of the technique, based on the measurement of a standard reference material, proved to be between 3% and 22% depending on the element, which presents only a marginal improvement (1%-3%) compared to the accuracy of the previously reported results. The measurement precision was between 1% and 9% while the calculated uncertainties on the final elemental concentrations ranged between 10% and 16%.

  13. High-Density Diffraction Imaging and Non-Imaging Grating Elements for EUV and X-ray Spectroscopy Fabricated by DUV Reduction Photolithography Project

    Data.gov (United States)

    National Aeronautics and Space Administration — There is a need for lightweight high-density (4000+ lines/mm) novel diffraction grating elements in modern telescopes to advance EUV and X-ray astrophysics. Current...

  14. Fourier holographic display for augmented reality using holographic optical element

    Science.gov (United States)

    Li, Gang; Lee, Dukho; Jeong, Youngmo; Lee, Byoungho

    2016-03-01

    A method for realizing a three-dimensional see-through augmented reality in Fourier holographic display is proposed. A holographic optical element (HOE) with the function of Fourier lens is adopted in the system. The Fourier hologram configuration causes the real scene located behind the lens to be distorted. In the proposed method, since the HOE is transparent and it functions as the lens just for Bragg matched condition, there is not any distortion when people observe the real scene through the lens HOE (LHOE). Furthermore, two optical characteristics of the recording material are measured for confirming the feasibility of using LHOE in the proposed see-through augmented reality holographic display. The results are verified experimentally.

  15. Optimal Illumination of Phase-only Diffractive Element Using GPC Light shaper

    DEFF Research Database (Denmark)

    Villangca, Mark Jayson; Bañas, Andrew Rafael; Kopylov, Oleksii

    2015-01-01

    optical setups requiring optimal illumination of devices such as spatial light modulators (SLMs). In this work, we integrated the GPC LS into a holography setup to generate more intense focal spots and extended patterns. The output of the holography setup with the GPC LS is compared with a similar setup...

  16. A sub wavelength localization scheme in optical imaging using conical diffraction

    National Research Council Canada - National Science Library

    Rosen, Shani; Sirat, Gabriel Y; Ilan, Har'el; Agranat, Aharon J

    2013-01-01

    .... An implementation of the scheme based on the utilization of the unique phenomenon of conical diffraction is presented, and the basic strategy it provides for enhanced localization in the diffraction limited region is demonstrated.

  17. Sound velocity measurement methods for porous sandstone. Measurements, finite element modelling, and diffraction correction

    CERN Document Server

    Sæther, Mathias; Ersland, Geir

    2016-01-01

    Acoustic material parameters of gas hydrate bearing porous rocks are important for evaluation of methods to exploit the vast methane gas resources present in the earth's subsurface, potentially combined with CO2 injection. A solid buffer method for measuring changes of the compressional wave velocity in porous rocks with changing methane hydrate contents under high-pressure hydrate-forming conditions, is tested and evaluated with respect to effects influencing on the measurement accuracy. The limited space available in the pressure chamber represents a challenge for the measurement method. Several effects affect the measured compressional wave velocity, such as interference from sidewall reflections, diffraction effects, the amount of torque (force) used to achieve acoustic coupling, and water draining of the watersaturated rock specimen. Test measurements using the solid buffer method in the pressure chamber at atmospheric conditions are compared to independent measurements using a water-bath immersion measu...

  18. Optical encryption in spatially-incoherent light using two LC SLMs for both information input and encryption element imaging

    Science.gov (United States)

    Bondareva, Alyona P.; Cheremkhin, Pavel A.; Evtikhiev, Nikolay N.; Krasnov, Vitaly V.; Rodin, Vladislav G.; Starikov, Sergey N.

    2014-10-01

    At present time methods of optical encryption are actively developed. The majority of existing methods of optical encryption use not only light intensity distribution, easily registered with photosensors, but also its phase distribution which require application of complex holographic schemes in conjunction with spatially coherent monochromatic illumination. This leads to complex optical schemes and low decryption quality. To eliminate these disadvantages it is possible to implement optical encryption using spatially incoherent monochromatic illumination which requires registration of light intensity distribution only. Encryption is accomplished by means of optical convolution of image of scene to be encrypted and encryption diffractive optical element (DOE) point spread function (PSF) which serves as encryption key. Encryption process is described as follows. Scene is illuminated with spatially-incoherent monochromatic light. In the absence of encryption DOE lens forms image of scene in photosensor plane. DOE serves as encryption element, its PSF - encryption key. Light passing through DOE forms convolution of object image and DOE PSF. Registered by photosensor convolution is encrypted image. Decryption was conducted numerically on computer by means of inverse filtration with regularization. Kinoforms were used as encryption DOE because they have single diffraction order. Two liquid crystal (LC) spatial light modulators (SLM) were used to implement dynamic digital information input and dynamic encryption key change. As input scene amplitude LC SLM HoloEye LC2002 with 800×600 pixels 32×32 μm2 and 256 gray levels was used. To image synthesized encryption kinoforms phase LC SLM HoloEye PLUTO VIS with 1920×1080 pixels 8×8 μm2 and 256 phase levels was used. Set of test images was successfully optically encrypted and then numerically decrypted. Encrypted images contents are hidden. Decrypted images despite quite high noise levels are positively recognizable

  19. Characterization of volume holographic optical elements recorded in Bayfol HX photopolymer for solar photovoltaic applications.

    Science.gov (United States)

    Marín-Sáez, Julia; Atencia, Jesús; Chemisana, Daniel; Collados, María-Victoria

    2016-03-21

    Volume Holographic Optical Elements (HOEs) present interesting characteristics for photovoltaic applications as they can select spectrum for concentrating the target bandwidth and avoiding non-desired wavelengths, which can cause the decrease of the performance on the cell, for instance by overheating it. Volume HOEs have been recorded on Bayfol HX photopolymer to test the suitability of this material for solar concentrating photovoltaic systems. The HOEs were recorded at 532 nm and provided a dynamic range, reaching close to 100% efficiency at 800 nm. The diffracted spectrum had a FWHM of 230 nm when illuminating at Bragg angle. These characteristics prove HOEs recorded on Bayfol HX photopolymer are suitable for concentrating solar light onto photovoltaic cells sensitive to that wavelength range.

  20. Optical diffraction tomography microscopy with transport of intensity equation using a light-emitting diode array

    Science.gov (United States)

    Li, Jiaji; Chen, Qian; Zhang, Jialin; Zhang, Zhao; Zhang, Yan; Zuo, Chao

    2017-08-01

    Optical diffraction tomography (ODT) is an effective label-free technique for quantitatively refractive index imaging, which enables long-term monitoring of the internal three-dimensional (3D) structures and molecular composition of biological cells with minimal perturbation. However, existing optical tomographic methods generally rely on interferometric configuration for phase measurement and sophisticated mechanical systems for sample rotation or beam scanning. Thereby, the measurement is suspect to phase error coming from the coherent speckle, environmental vibrations, and mechanical error during data acquisition process. To overcome these limitations, we present a new ODT technique based on non-interferometric phase retrieval and programmable illumination emitting from a light-emitting diode (LED) array. The experimental system is built based on a traditional bright field microscope, with the light source replaced by a programmable LED array, which provides angle-variable quasi-monochromatic illumination with an angular coverage of ±37 degrees in both x and y directions (corresponding to an illumination numerical aperture of ∼0.6). Transport of intensity equation (TIE) is utilized to recover the phase at different illumination angles, and the refractive index distribution is reconstructed based on the ODT framework under first Rytov approximation. The missing-cone problem in ODT is addressed by using the iterative non-negative constraint algorithm, and the misalignment of the LED array is further numerically corrected to improve the accuracy of refractive index quantification. Experiments on polystyrene beads and thick biological specimens show that the proposed approach allows accurate refractive index reconstruction while greatly reduced the system complexity and environmental sensitivity compared to conventional interferometric ODT approaches.

  1. Label-free identification of white blood cell using optical diffraction tomography (Conference Presentation)

    Science.gov (United States)

    Yoon, Jonghee; Kim, Kyoohyun; Kim, Min-hyeok; Kang, Suk-Jo; Park, YongKeun

    2016-03-01

    White blood cells (WBC) have crucial roles in immune systems which defend the host against from disease conditions and harmful invaders. Various WBC subsets have been characterized and reported to be involved in many pathophysiologic conditions. It is crucial to isolate a specific WBC subset to study its pathophysiological roles in diseases. Identification methods for a specific WBC population are rely on invasive approaches, including Wright-Gimesa staining for observing cellular morphologies and fluorescence staining for specific protein markers. While these methods enable precise classification of WBC populations, they could disturb cellular viability or functions. In order to classify WBC populations in a non-invasive manner, we exploited optical diffraction tomography (ODT). ODT is a three-dimensional (3-D) quantitative phase imaging technique that measures 3-D refractive index (RI) distributions of individual WBCs. To test feasibility of label-free classification of WBC populations using ODT, we measured four subtypes of WBCs, including B cell, CD4 T cell, CD8 T cell, and natural killer (NK) cell. From measured 3-D RI tomograms of WBCs, we obtain quantitative structural and biochemical information and classify each WBC population using a machine learning algorithm.

  2. Visual outcomes and optical quality after implantation of a diffractive multifocal toric intraocular lens

    Science.gov (United States)

    Chen, Xiangfei; Zhao, Ming; Shi, Yuhua; Yang, Liping; Lu, Yan; Huang, Zhenping

    2016-01-01

    Background: This study evaluated the visual function after implantation of a multifocal toric intraocular lenses (IOLs). Materials and Methods: This study involved 10 eyes from eight cataract patients with corneal astigmatism of 1.0 diopter (D) or higher who had received phacoemulsification with implantation of an AcrySof IQ ReSTOR Toric IOL. Six-month evaluations included visual acuity, spherical equivalent (SE), defocus curve, residual astigmatism, IOL rotation, contrast sensitivity (CS), wavefront aberrations, modulation transfer function (MTF), and patient satisfaction assessments. Results: At 6 months postoperatively, uncorrected distance visual acuity (logarithm of the minimum angle of resolution) was 0.09 ± 0.04, corrected distance visual acuity was 0.02 ± 0.11, and uncorrected near visual acuity was 0.12 ± 0.07. The mean SE was −0.095 ± 0.394 D (±0.50 D in 90%). Refractive astigmatism at the 6-month follow-up visit was significantly reduced to 0.35 ± 0.32 D from 1.50 ± 0.41 D presurgery (P 0.05). There was an increase in MTF results between preoperative and postoperative evaluations at all spatial frequencies. Conclusions: The diffractive multifocal toric IOL is able to provide a predictable astigmatic correction with apparently outstanding levels of optical quality after implantation. PMID:27221680

  3. Quantification of neurotoxic effects on individual neuron cells using optical diffraction tomography (Conference Presentation)

    Science.gov (United States)

    Yoon, Jonghee; Yang, Su-a.; Kim, Kyoohyun; Park, YongKeun

    2016-03-01

    Parkinson's disease (PD) is a common neurodegenerative disease that causes symptoms of postural instability and slowness of movement. Neurodegeneration in dopaminergic neurons at the substantia nigra has been reported as pathologic features, however, detailed mechanisms underlying neurodegeneration are still remain unclear. To investigate a neurodegenerative process, various imaging tools including phase contrast microscopy, electron microscopy, and fluorescence microscopy are utilized. However, these imaging methods provide qualitative information and require invasive approaches such as the use of fluorescence agents or chemical fixation procedures that disturb normal physiological conditions of neuron cells. In order to quantify the neurodegenerative process in a non-invasive manner, we exploited optical diffraction tomography (ODT). ODT is a 3D quantitative phase imaging method that measures 3D refractive index (RI) distributions of a sample which provide quantitative structural (volume, surface area, sphericity) and biochemical (protein concentration, total cellular dry mass) information. We investigated neurotoxic effects of MPP+ on SH-SY5Y cells by using quantitative information obtained from 3D RI distributions. We also performed temporal measurements of 3D RI distributions of an individual SH-SY5Y cell to analyze neurotoxic effects on intracellular vesicle dynamics.

  4. The wave energy flux of high frequency diffracting beams in complex geometrical optics

    Science.gov (United States)

    Maj, Omar; Mariani, Alberto; Poli, Emanuele; Farina, Daniela

    2013-04-01

    We consider the construction of asymptotic solutions of Maxwell's equations for a diffracting wave beam in the high frequency limit and address the description of the wave energy flux transported by the beam. With this aim, the complex eikonal method is applied. That is a generalization of the standard geometrical optics method in which the phase function is assumed to be complex valued, with the non-negative imaginary part accounting for the finite width of the beam cross section. In this framework, we propose an argument which simplifies significantly the analysis of the transport equation for the wave field amplitude and allows us to derive the wave energy flux. The theoretical analysis is illustrated numerically for the case of electron cyclotron beams in tokamak plasmas by using the GRAY code [D. Farina, Fusion Sci. Technol. 52, 154 (2007)], which is based upon the complex eikonal theory. The results are compared to those of the paraxial beam tracing code TORBEAM [E. Poli et al., Comput. Phys. Commun. 136, 90 (2001)], which provides an independent calculation of the energy flow.

  5. The wave energy flux of high frequency diffracting beams in complex geometrical optics

    Energy Technology Data Exchange (ETDEWEB)

    Maj, Omar; Poli, Emanuele [Max Planck Institute for Plasma Physics, EURATOM Association, Boltzmannstr. 2, 85748 Garching (Germany); Mariani, Alberto [Istituto di Fisica del Plasma ' P. Caldirola,' Consiglio Nazionale delle Ricerche, EURATOM-ENEA-CNR Association, via R. Cozzi 53, I-20125 Milano (Italy); Universita degli Studi di Milano, Dipartimento di Fisica, Via Celoria 16, 20133 Milano (Italy); Farina, Daniela [Istituto di Fisica del Plasma ' P. Caldirola,' Consiglio Nazionale delle Ricerche, EURATOM-ENEA-CNR Association, via R. Cozzi 53, I-20125 Milano (Italy)

    2013-04-15

    We consider the construction of asymptotic solutions of Maxwell's equations for a diffracting wave beam in the high frequency limit and address the description of the wave energy flux transported by the beam. With this aim, the complex eikonal method is applied. That is a generalization of the standard geometrical optics method in which the phase function is assumed to be complex valued, with the non-negative imaginary part accounting for the finite width of the beam cross section. In this framework, we propose an argument which simplifies significantly the analysis of the transport equation for the wave field amplitude and allows us to derive the wave energy flux. The theoretical analysis is illustrated numerically for the case of electron cyclotron beams in tokamak plasmas by using the GRAY code [D. Farina, Fusion Sci. Technol. 52, 154 (2007)], which is based upon the complex eikonal theory. The results are compared to those of the paraxial beam tracing code TORBEAM [E. Poli et al., Comput. Phys. Commun. 136, 90 (2001)], which provides an independent calculation of the energy flow.

  6. Alignment of the James Webb Space Telescope optical telescope element

    Science.gov (United States)

    Glassman, Tiffany; Levi, Joshua; Liepmann, Till; Hahn, Walter; Bisson, Gary; Porpora, Dan; Hadjimichael, Theo

    2016-07-01

    The optical telescope element (OTE) of the James Webb Space Telescope has now been integrated and aligned. The OTE comprises the flight mirrors and the structure that supports them - 18 primary mirror segments, the secondary mirror, and the tertiary and fine steering mirrors (both housed in the aft optics subsystem). The primary mirror segments and the secondary mirror have actuators to actively control their positions during operations. This allows the requirements for aligning the OTE subsystems to be in the range of microns rather than nanometers. During OTE integration, the alignment of the major subsystems of the OTE structure and optics were controlled to ensure that, when the telescope is on orbit and at cryogenic temperatures, the active mirrors will be within the adjustment range of the actuators. Though the alignment of this flagship mission was complex and intricate, the key to a successful integration process turned out to be very basic: a clear, concise series of steps employing advanced planning, backup measurements, and cross checks that this multi-organizational team executed with a careful and methodical approach. This approach was not only critical to our own success but has implications for future space observatories.

  7. Diffractive optics based four-wave, six-wave, ..., nu-wave nonlinear spectroscopy.

    Science.gov (United States)

    Miller, R J Dwayne; Paarmann, Alexander; Prokhorenko, Valentyn I

    2009-09-15

    A detailed understanding of chemical processes requires information about both structure and dynamics. By definition, a reaction involves nonstationary states and is a dynamic process. Structure describes the atomic positions at global minima in the nuclear potential energy surface. Dynamics are related to the anharmonicities in this potential that couple different minima and lead to changes in atomic positions (reactions) and correlations. Studies of molecular dynamics can be configured to directly access information on the anharmonic interactions that lead to chemical reactions and are as central to chemistry as structural information. In this regard, nonlinear spectroscopies have distinct advantages over more conventional linear spectroscopies. Because of this potential, nonlinear spectroscopies could eventually attain a comparable level of importance for studying dynamics on the relevant time scales to barrier crossings and reactive processes as NMR has for determining structure. Despite this potential, nonlinear spectroscopy has not attained the same degree of utility as linear spectroscopy largely because nonlinear studies are more technically challenging. For example, unlike the linear spectrometers that exist in almost all chemistry departments, there are no "black box" four-wave mixing spectrometers. This Account describes recent advances in the application of diffractive optics (DOs) to nonlinear spectroscopy, which reduces the complexity level of this technology to be closer to that of linear spectroscopy. The combination of recent advances in femtosecond laser technology and this single optic approach could bring this form of spectroscopy out of the exclusive realm of specialists and into the general user community. However, the real driving force for this research is the pursuit of higher sensitivity limits, which would enable new forms of nonlinear spectroscopy. This Account chronicles the research that has now extended nonlinear spectroscopy to six

  8. Very High Resolution Solar X-ray Imaging Using Diffractive Optics

    Science.gov (United States)

    Dennis, B. R.; Skinner, G. K.; Li, M. J.; Shih, A. Y.

    2012-01-01

    This paper describes the development of X-ray diffractive optics for imaging solar flares with better than 0.1 arcsec angular resolution. X-ray images with this resolution of the greater than or equal to 10 MK plasma in solar active regions and solar flares would allow the cross-sectional area of magnetic loops to be resolved and the coronal flare energy release region itself to be probed. The objective of this work is to obtain X-ray images in the iron-line complex at 6.7 keV observed during solar flares with an angular resolution as fine as 0.1 arcsec - over an order of magnitude finer than is now possible. This line emission is from highly ionized iron atoms, primarily Fe xxv, in the hottest flare plasma at temperatures in excess of approximately equal to 10 MK. It provides information on the flare morphology, the iron abundance, and the distribution of the hot plasma. Studying how this plasma is heated to such high temperatures in such short times during solar flares is of critical importance in understanding these powerful transient events, one of the major objectives of solar physics.We describe the design, fabrication, and testing of phase zone plate X-ray lenses with focal lengths of approximately equal to 100 m at these energies that would be capable of achieving these objectives. We show how such lenses could be included on a two-spacecraft formation-flying mission with the lenses on the spacecraft closest to the Sun and an X-ray imaging array on the second spacecraft in the focal plane approximately equal to 100 m away. High resolution X-ray images could be obtained when the two spacecraft are aligned with the region of interest on the Sun. Requirements and constraints for the control of the two spacecraft are discussed together with the overall feasibility of such a formation-flying mission.

  9. Development of large aperture elements for active and adaptive optics

    Directory of Open Access Journals (Sweden)

    Stranakova E.

    2013-05-01

    Full Text Available Large-aperture elements for laser active and adaptive optics are investigated in collaboration within IOP AcSci CR, FEng CTU and 5M. A bimorph deformable mirror for high-power lasers based on a lightweight structure with a composite core is currently in development. In order to realize a sufficiently large working aperture we are using new technologies for production of core, bimorph actuator and DM reflector. Detailed simulation of components and structure is validated by measurement and testing. A research of DM actuation and response of a complicated mirror structure needed for an accurate control of a deformation is performed. Testing of samples and subscale measurements are currently performed, measurement of a complete structure is in preparation.

  10. Optical design and multiobjective optimization of miniature zoom optics with liquid lens element.

    Science.gov (United States)

    Sun, Jung-Hung; Hsueh, Bo-Ren; Fang, Yi-Chin; MacDonald, John; Hu, Chao-Chang

    2009-03-20

    We propose an optical design for miniature 2.5x zoom fold optics with liquid elements. First, we reduce the volumetric size of the system. Second, this newly developed design significantly reduces the number of moving groups for this 2.5x miniature zoom optics (with only two moving groups compared with the four or five groups of the traditional zoom lens system), thanks to the assistance of liquid lens elements in particular. With regard to the extended optimization of this zoom optics, relative illuminance (RI) and the modulation transfer function (MTF) are considered because the more rays passing through the edge of the image, the lower will be the MTF, at high spatial frequencies in particular. Extended optimization employs the integration of the Taguchi method and the robust multiple criterion optimization (RMCO) approach. In this approach, a Pareto optimal robust design solution is set with the aid of a certain design of the experimental set, which uses analysis of variance results to quantify the relative dominance and significance of the design factors. It is concluded that the Taguchi method and RMCO approach is successful in optimizing the RI and MTF values of the fold 2.5x zoom lens system and yields better and more balanced performance, which is very difficult for the traditional least damping square method to achieve.

  11. Application of the method of auxiliary sources in optical diffraction microscopy

    DEFF Research Database (Denmark)

    Karamehmedovic, Mirza; Sørensen, Mads Peter; Hansen, Poul-Erik

    2010-01-01

    The Method of Auxiliary Sources is used for characterisation of grating defects. Grating profiles are characterised by best fit matching of a library of diffraction efficiencies with numerical simulated diffraction efficiencies with defects. It is shown that the presented method can solve...

  12. Sighting optics including an optical element having a first focal length and a second focal length and methods for sighting

    Science.gov (United States)

    Crandall, David Lynn

    2011-08-16

    Sighting optics include a front sight and a rear sight positioned in a spaced-apart relation. The rear sight includes an optical element having a first focal length and a second focal length. The first focal length is selected so that it is about equal to a distance separating the optical element and the front sight and the second focal length is selected so that it is about equal to a target distance. The optical element thus brings into simultaneous focus for a user images of the front sight and the target.

  13. Surface diffusion of CO on Ni(111) studied by diffraction of optical second-harmonic generation off a monolayer grating

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, X.D.; Rasing, T.; Shen, Y.R.

    1988-12-19

    Diffraction of optical second-harmonic generation from a monolayer grating created by laser desorption of adsorbates can be used to study surface diffusion of molecules on substrates. Application of this novel technique to CO on Ni(111) yields a diffusion activation energy of 6.9 kcal/mol and a preexponential factor of approx. =1.2 x 10/sup -5/ cm/sup 2/s/sup -1/.

  14. High-contrast self-imaging with ordered optical elements

    CERN Document Server

    Naqavi, Ali; Rossi, Markus

    2016-01-01

    Creating arbitrary light patterns finds applications in various domains including lithography, beam shaping, metrology, sensing and imaging. We study the formation of high-contrast light patterns that are obtained by transmission through an ordered optical element based on self-imaging.By applying the phase-space method, we explain phenomena such as the Talbot and the angular Talbot effects. We show that the image contrast is maximum when the source is either a plane wave or a point source, and it has a minimum for a source with finite spatial extent. We compare these regimes and address some of their fundamental differences. Specifically, we prove that increasing the source divergence reduces the contrast for the plane wave illumination but increases it for the point source. Also, we show that to achieve high contrast with a point source, tuning the source size and its distance to the element is crucial.We furthermore indicate and explore the possibility of realizing highly complex light patterns by using a ...

  15. Optical sensing elements for nitrogen dioxide (NO.sub.2) gas detection, a sol-gel method for making the sensing elements and fiber optic sensors incorporating nitrogen dioxide gas optical sensing elements

    Science.gov (United States)

    Mechery, Shelly John; Singh, Jagdish P.

    2007-07-03

    A sensing element, a method of making a sensing element, and a fiber optic sensor incorporating the sensing element are described. The sensor can be used for the quantitative detection of NO.sub.2 in a mixture of gases. The sensing element can be made by incorporating a diazotizing reagent which reacts with nitrous ions to produce a diazo compound and a coupling reagent which couples with the diazo compound to produce an azo dye into a sol and allowing the sol to form an optically transparent gel. The sensing element changes color in the presence of NO.sub.2 gas. The temporal response of the absorption spectrum at various NO.sub.2 concentrations has also been recorded and analyzed. Sensors having different design configurations are described. The sensing element can detect NO.sub.2 gas at levels of parts per billion.

  16. Superresolved optical imaging through higher-order spatial frequency harmonic generation without beating the diffraction limit of light

    CERN Document Server

    Li, Zhixiang; Zhang, Guoquan

    2016-01-01

    We proposed a method to achieve superresolved optical imaging without beating the diffraction limit of light. This is achieved by magnifying the ideal optical image of the object through higher-order spatial frequency generation while keeping the size of the effective point spread function of the optical imaging system unchanged. A proof-of-principle experiment was demonstrated in a modified $4f$-imaging system, where the spatial frequency of a two-line source was doubled or tripled on the confocal Fourier plane of the $4f$-imaging system through a light pulse storage and retrieval process based on the electromagnetically induced transparency effect in a Pr$^{3+}$:$\\rm Y_2SiO_5$ crystal, and an originally unresolvable image of the two line sources in the conventional $4f$-imaging system became resolvable with the spatial frequency doubling or tripling. Our results offer an original way towards improving optical imaging resolution without beating the diffraction limit of light, which is totally different from ...

  17. Damage investigation on tungsten and diamond diffractive optics at a hard x-ray free-electron laser.

    Science.gov (United States)

    Uhlén, Fredrik; Nilsson, Daniel; Holmberg, Anders; Hertz, Hans M; Schroer, Christian G; Seiboth, Frank; Patommel, Jens; Meier, Vivienne; Hoppe, Robert; Schropp, Andreas; Lee, Hae Ja; Nagler, Bob; Galtier, Eric; Krzywinski, Jacek; Sinn, Harald; Vogt, Ulrich

    2013-04-08

    Focusing hard x-ray free-electron laser radiation with extremely high fluence sets stringent demands on the x-ray optics. Any material placed in an intense x-ray beam is at risk of being damaged. Therefore, it is crucial to find the damage thresholds for focusing optics. In this paper we report experimental results of exposing tungsten and diamond diffractive optics to a prefocused 8.2 keV free-electron laser beam in order to find damage threshold fluence levels. Tungsten nanostructures were damaged at fluence levels above 500 mJ/cm(2). The damage was of mechanical character, caused by thermal stress variations. Diamond nanostructures were affected at a fluence of 59 000 mJ/cm(2). For fluence levels above this, a significant graphitization process was initiated. Scanning Electron Microscopy (SEM) and µ-Raman analysis were used to analyze exposed nanostructures.

  18. Optically confined polarized resonance Raman studies in identifying crystalline orientation of sub-diffraction limited AlGaN nanostructure

    Energy Technology Data Exchange (ETDEWEB)

    Sivadasan, A. K., E-mail: sivankondazhy@gmail.com; Patsha, Avinash; Dhara, Sandip, E-mail: dhara@igcar.gov.in [Surface and Nanoscience Division, Indira Gandhi Centre for Atomic Research, Kalpakkam 603102 (India)

    2015-04-27

    An optical characterization tool of Raman spectroscopy with extremely weak scattering cross section tool is not popular to analyze scattered signal from a single nanostructure in the sub-diffraction regime. In this regard, plasmonic assisted characterization tools are only relevant in spectroscopic studies of nanoscale object in the sub-diffraction limit. We have reported polarized resonance Raman spectroscopic (RRS) studies with strong electron-phonon coupling to understand the crystalline orientation of a single AlGaN nanowire of diameter ∼100 nm. AlGaN nanowire is grown by chemical vapor deposition technique using the catalyst assisted vapor-liquid-solid process. The results are compared with the high resolution transmission electron microscopic analysis. As a matter of fact, optical confinement effect due to the dielectric contrast of nanowire with respect to that of surrounding media assisted with electron-phonon coupling of RRS is useful for the spectroscopic analysis in the sub-diffraction limit of 325 nm (λ/2N.A.) using an excitation wavelength (λ) of 325 nm and near ultraviolet 40× far field objective with a numerical aperture (N.A.) value of 0.50.

  19. Extremely asymmetric diffraction as a method of determining magneto-optical constants for X-rays near absorption edges

    Energy Technology Data Exchange (ETDEWEB)

    Andreeva, M. A., E-mail: Mandreeva1@yandex.ru [Moscow State University (Russian Federation); Repchenko, Yu. L., E-mail: kent160@mail.ru [Voronezh State University (Russian Federation); Smekhova, A. G. [Moscow State University (Russian Federation); Dumesnil, K. [University of Lorraine, Institut Jean Lamour (UMR CNRS 7198) (France); Wilhelm, F.; Rogalev, A. [European Synchrotron Radiation Facility (France)

    2015-06-15

    The spectral dependence of the Bragg peak position under conditions of extremely asymmetric diffraction has been analyzed in the kinematical and dynamical approximations of the diffraction theory. Simulations have been performed for the L{sub 3} absorption edge of yttrium in a single-crystal YFe{sub 2} film; they have shown that the magneto-optical constants (or, equivalently, the dispersion corrections to the atomic scattering factor) for hard X-rays can be determined from this dependence. Comparison with the experimental data obtained for a Nb(4 nm)/YFe{sub 2}(40 nm〈110〉)/Fe(1.5 nm)/Nb(50 nm)/sapphire sample at the European Synchrotron Radiation Facility has been made.

  20. Extraordinary optical transmission with tapered slits: effect of higher diffraction and slit resonance orders

    DEFF Research Database (Denmark)

    Sondergaard, T.; Bozhevolnyi, S. I.; Beermann, J.;

    2012-01-01

    Transmission through thin metal films with a periodic arrangement of tapered slits is considered. Transmission maps covering a wide range of periods, film thicknesses, and taper angles are presented. The maps show resonant transmission when fundamental and higher-order slit resonances are excited....... A study of the effect on transmission of different combinations of available transmission and reflection diffraction orders show optimum total transmission when only the fundamental reflection order and higher transmission diffraction orders are available. The optimum taper angle is shown...

  1. Negative optical spin torque wrench of a non-diffracting non-paraxial fractional Bessel vortex beam

    Science.gov (United States)

    Mitri, F. G.

    2016-10-01

    An absorptive Rayleigh dielectric sphere in a non-diffracting non-paraxial fractional Bessel vortex beam experiences a spin torque. The axial and transverse radiation spin torque components are evaluated in the dipole approximation using the radiative correction of the electric field. Particular emphasis is given on the polarization as well as changing the topological charge α and the half-cone angle of the beam. When α is zero, the axial spin torque component vanishes. However, when α becomes a real positive number, the vortex beam induces left-handed (negative) axial spin torque as the sphere shifts off-axially from the center of the beam. The results show that a non-diffracting non-paraxial fractional Bessel vortex beam is capable of inducing a spin reversal of an absorptive Rayleigh sphere placed arbitrarily in its path. Potential applications are yet to be explored in particle manipulation, rotation in optical tweezers, optical tractor beams, and the design of optically-engineered metamaterials to name a few areas.

  2. Design of an optical-fiber refractometric transducer with hemispherical detection element

    OpenAIRE

    2006-01-01

    We analyzed the performance of the opticalfiber refractometric transducer with hemispherical optical detection element. Specifically, we examined the effect of the light intensity distribution in the optical fibers on the transducer response to the refractive index of the surrounding media. In addition, we accounted for small local imperfections of the optical detection element surface. Accounting for these effects results in a significant accuracy improvement in the modeling of the described...

  3. Modeling electron density distributions from X-ray diffraction to derive optical properties: Constrained wavefunction versus multipole refinement

    Science.gov (United States)

    Hickstein, Daniel D.; Cole, Jacqueline M.; Turner, Michael J.; Jayatilaka, Dylan

    2013-08-01

    The rational design of next-generation optical materials requires an understanding of the connection between molecular structure and the solid-state optical properties of a material. A fundamental challenge is to utilize the accurate structural information provided by X-ray diffraction to explain the properties of a crystal. For years, the multipole refinement has been the workhorse technique for transforming high-resolution X-ray diffraction datasets into the detailed electron density distribution of crystalline material. However, the electron density alone is not sufficient for a reliable calculation of the nonlinear optical properties of a material. Recently, the X-ray constrained wavefunction refinement has emerged as a viable alternative to the multipole refinement, offering several potential advantages, including the calculation of a wide range of physical properties and seeding the refinement process with a physically reasonable starting point. In this study, we apply both the multipole refinement and the X-ray constrained wavefunction technique to four molecules with promising nonlinear optical properties and diverse structural motifs. In general, both techniques obtain comparable figures of merit and generate largely similar electron densities, demonstrating the wide applicability of the X-ray constrained wavefunction method. However, there are some systematic differences between the electron densities generated by each technique. Importantly, we find that the electron density generated using the X-ray constrained wavefunction method is dependent on the exact location of the nuclei. The X-ray constrained wavefunction refinement makes smaller changes to the wavefunction when coordinates from the Hartree-Fock-based Hirshfeld atom refinement are employed rather than coordinates from the multipole refinement, suggesting that coordinates from the Hirshfeld atom refinement allow the X-ray constrained wavefunction method to produce more accurate wavefunctions. We

  4. Simultaneous measurement of position and color of single fluorescent emitters using diffractive optics

    NARCIS (Netherlands)

    Broeken, J.; Rieger, B.; Stallinga, S.

    2014-01-01

    We propose a method for simultaneously measuring the position and emission color of single fluorescent emitters based on the use of a large pitch diffraction grating in the emission light path. The grating produces satellite spots adjacent to the main spot; the relative distance between the spots is

  5. Improved characterization of small particles in laser diffraction by better optical modeling

    NARCIS (Netherlands)

    Butselaar, V.C.L.; Schouten, L.A.; Verheijen, P.J.T.

    2004-01-01

    Laser Diffraction is widely used for the characterization of particle size distributions of powders. For a lot of materials however, the quantification of small particles (< 2 μm) in relation to the rest of the distribution can be ambiguous. The deconvolution of the scattering pattern is done either

  6. Characteristics of the autostereoscopic three-dimensional LED display based on diffractive optical elements sheet

    Science.gov (United States)

    Su, Ping; An, Pengli; Ma, Jianshe; An, Shu; Cao, Liangcai

    2016-10-01

    Research on the characteristic of the autostereoscopic LED display (ALEDD) using DOEs sheet is of prime importance to the widely application of the (ALEDD). In this paper, the effects caused by the assembling errors between the LED display and DOEs sheet are theoretically and experimentally analyzed. The results show that, the tolerance assembling errors are | Δ z |autostereoscopic three-dimensional LED display system to reduce the crosstalk and improve the quality of 3D perception.

  7. Using acrylamide-based photopolymers for fabrication of holographic optical elements in solar energy applications.

    Science.gov (United States)

    Akbari, Hoda; Naydenova, Izabela; Martin, Suzanne

    2014-03-01

    A holographic device is under development that aims to improve light collection in solar cells. The aim is to explore the potential of using photopolymer holographic optical elements (HOEs) to collect light from a moving source, such as the sun, and redirect it for concentration by a holographic lens. A working range of 45° is targeted for such a device to be useful in solar applications without tracking. A photopolymer HOE is capable of efficiently redirecting light, but the angular selectivity of a single grating is usually of the order of one degree at the thicknesses required for high efficiency. The challenge here is to increase the angular and wavelength range of the gratings so that a reasonable number may be multiplexed and/or combined to create a device that can concentrate light incident from a large range of angles. In this paper, low spatial frequency holographic recording is explored to increase the angular and wavelength range of an individual grating. Ultimately, a combination of gratings will be used so that a broad range of angles of incidence are accepted. A design is proposed for the combination of such elements into a holographic solar collector. The first step in achieving this is optimization of recording at low spatial frequency. This requires a photopolymer material with unique properties, such as a fast monomer diffusion rate. This paper reports results on the efficiency of holograms recorded in an acrylamide-based photopolymer at low spatial frequencies (100, 200, and 300  l/mm). The diffraction efficiency and angular selectivity of recorded holograms have been studied for various photopolymer layer thicknesses and different intensities of the recording beams. A diffraction efficiency of over 80% was achieved at a spatial frequency of 200  l/mm. The optimum intensity of recording at this spatial frequency was found to be 1  mW/cm2. Individual gratings and focusing elements with high efficiency and FWHM angles of 3° are

  8. Geometrical characterization of micro-optical cylindrical lens arrays using angular resolved diffraction

    DEFF Research Database (Denmark)

    Iversen, Theis Faber Quist; Hanson, Steen Grüner

    2010-01-01

    been shown (Iversen et al 2009 J. Opt. A: Pure Appl. Opt. 11 054014 (6pp), B¨uttner and Zeitner 2002 Appl. Opt. 41 6841 8) that the average radius of curvature of an MLA structure can be extracted by observing the far-field diffraction pattern intensity distribution obtained from illumination...... of the MLA structure with a coherent light source. This method is based on a priori knowledge of the grating period. We here present a method that fully characterizes the geometrical properties, i.e. the grating period and the average radius of curvature of an MLA structure in a single measurement cycle....... By scanning the angle of incidence of the coherent illumination and simultaneously observing the diffracted intensity, information about the grating period and the radius of curvature can be extracted. The method is implemented with emphasis on further development for compact, high-speed dedicated systems. We...

  9. Measurements of charge diffusion in deep-depletion CCDs by optical diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Cease, H.; Diehl, H.T.; Estrada, J.; Flaugher, B.; Scarpine, V.; /Fermilab

    2007-10-01

    The charge diffusion is measured in back illuminated, fully depleted, 250 {micro}m thick CCDs by imaging the diffraction pattern of a double slit. The CCDs studied are the focal plane detectors for the Dark Energy Camera (DECam) instrument currently under construction for the Dark Energy Survey (DES). The results presented here indicate that the dispersion of charge due to diffusion can be kept below the DES specification ({sigma}{sub d} < 7.0 {micro}m).

  10. Compact Fiber Optic Strain Sensors (cFOSS) Element

    Data.gov (United States)

    National Aeronautics and Space Administration — Armstrong researchers are reducing the Fiber Optic Sensing Sysme (FOSS) technology’s size, power requirement, weight, and cost to effectively extend...

  11. Educational Software for Interference and Optical Diffraction Analysis in Fresnel and Fraunhofer Regions Based on MATLAB GUIs and the FDTD Method

    Science.gov (United States)

    Frances, J.; Perez-Molina, M.; Bleda, S.; Fernandez, E.; Neipp, C.; Belendez, A.

    2012-01-01

    Interference and diffraction of light are elementary topics in optics. The aim of the work presented here is to develop an accurate and cheap optical-system simulation software that provides a virtual laboratory for studying the effects of propagation in both time and space for the near- and far-field regions. In laboratory sessions, this software…

  12. Educational Software for Interference and Optical Diffraction Analysis in Fresnel and Fraunhofer Regions Based on MATLAB GUIs and the FDTD Method

    Science.gov (United States)

    Frances, J.; Perez-Molina, M.; Bleda, S.; Fernandez, E.; Neipp, C.; Belendez, A.

    2012-01-01

    Interference and diffraction of light are elementary topics in optics. The aim of the work presented here is to develop an accurate and cheap optical-system simulation software that provides a virtual laboratory for studying the effects of propagation in both time and space for the near- and far-field regions. In laboratory sessions, this software…

  13. Micro-optical elements functioning in non-visible spectral range

    Science.gov (United States)

    Wang, Qin; Zhang, Andy Z. Z.; Bergström, Andreas; Huo, Vicky Z. J.; Almqvist, Susanne; Kaplan, Wlodek; Andersson, Jan Y.

    2010-05-01

    Nowadays novel micro-fabrication and wafer-based manufacturing approach allows realizing micro-optics in a way scientists have dreamt for generations, in particular, utilizing nano-imprint lithography as fabrication tooling enables greatly accelerating the micro-optics technology to its frontier. In this report, we present wafer-scale fabrication of various types of micro-optical elements based on photoresist, benzocyclobutene, photocurable imprint resist, and semiconductor materials by using thermal reflow, reactive ion etching, and imprint techniques. Especially, several concave or convex 3-dimensional micro-optical structures shaped by imprint method are detailed. These micro-optical elements can be monolithically or hybrid integrated onto optoelectronics devices, such as photodetectors and emitters as optical beam focuser, collimator, filter, or anti-reflectance elements. As application examples, polymer microlenses were integrated directly on the top of UV dual functional devices and quantum dot long wavelength infrared photodetectors, respectively.

  14. Compound focusing mirror and X-ray waveguide optics for coherent imaging and nano-diffraction.

    Science.gov (United States)

    Salditt, Tim; Osterhoff, Markus; Krenkel, Martin; Wilke, Robin N; Priebe, Marius; Bartels, Matthias; Kalbfleisch, Sebastian; Sprung, Michael

    2015-07-01

    A compound optical system for coherent focusing and imaging at the nanoscale is reported, realised by high-gain fixed-curvature elliptical mirrors in combination with X-ray waveguide optics or different cleaning apertures. The key optical concepts are illustrated, as implemented at the Göttingen Instrument for Nano-Imaging with X-rays (GINIX), installed at the P10 coherence beamline of the PETRA III storage ring at DESY, Hamburg, and examples for typical applications in biological imaging are given. Characteristic beam configurations with the recently achieved values are also described, meeting the different requirements of the applications, such as spot size, coherence or bandwidth. The emphasis of this work is on the different beam shaping, filtering and characterization methods.

  15. Simultaneous Replication of both Refractive and Diffractive Optical Components using Electroformed Tools and Injection Moulding

    DEFF Research Database (Denmark)

    Tang, Peter Torben; Christensen, Thomas R.

    2003-01-01

    the delicate optical surfaces are buried/sealed in the metal sandwich. The aluminium is then dissolved in warm sodium hydroxide and the glass components are carefully removed. Finally, glue residue is dissolved and the thin gold layer selectively etched. The finished tool insert is then placed in the injection...

  16. Optical dipole mirror for cold atoms based on a metallic diffraction grating

    DEFF Research Database (Denmark)

    Kawalec, Tomasz; Bartoszek-Bober, Dobroslawa; Panas, Roman

    2014-01-01

    and numerically determined mirror efficiencies are close to 100%. The intensity of SPPs above a real grating coupler and the atomic trajectories, as well as the momentum dispersion of the atom cloud being reflected, are computed. A suggestion is given as to how the plasmonic mirror might serve as an optical atom...

  17. Simultaneous Replication of both Refractive and Diffractive Optical Components using Electroformed Tools and Injection Moulding

    DEFF Research Database (Denmark)

    Tang, Peter Torben; Christensen, Thomas R.

    2003-01-01

    the delicate optical surfaces are buried/sealed in the metal sandwich. The aluminium is then dissolved in warm sodium hydroxide and the glass components are carefully removed. Finally, glue residue is dissolved and the thin gold layer selectively etched. The finished tool insert is then placed in the injection...

  18. Experimental proposal of probabilistic superdense coding with linear optical elements

    Energy Technology Data Exchange (ETDEWEB)

    Lin Qing; Li Jian; Guo Guangcan [Key Laboratory of Quantum Information, University of Science and Technology of China, Hefei 230026 (China)

    2006-09-14

    In this paper, we propose an experimental scheme of probabilistic superdense coding assisted with linear optical manipulations, photon entanglement produced from parametric down-conversion and postselection from coincidence measurements. The proposal is feasible by current experimental technology.

  19. Long-focus reflective optical elements for technological application

    Science.gov (United States)

    Tolstopyatov, Eugene M.

    1998-09-01

    Simple and cheap long-focus optical systems consisting of cylindrical mirrors are proposed to use in processes of laser processing of materials (cutting, welding, thin film deposition by evaporation). Methods of calculation of the focusing systems of this type are developed and aberrations are estimated. Optical system was used as a part of installation for thin alloys and polymer films deposition as well as for manufacturing PTFE wool and PTFE porous material.

  20. Geometrical characterization of micro-optical cylindrical lens arrays using angular resolved diffraction

    DEFF Research Database (Denmark)

    Iversen, Theis Faber Quist; Hanson, Steen Grüner

    2010-01-01

    of the MLA structure with a coherent light source. This method is based on a priori knowledge of the grating period. We here present a method that fully characterizes the geometrical properties, i.e. the grating period and the average radius of curvature of an MLA structure in a single measurement cycle....... By scanning the angle of incidence of the coherent illumination and simultaneously observing the diffracted intensity, information about the grating period and the radius of curvature can be extracted. The method is implemented with emphasis on further development for compact, high-speed dedicated systems. We...... present experimental data extracted from two different MLA structures using the proposed method. The results are compared with atomic force microscopy measurements of the MLA geometry....

  1. Single-Slit Diffraction: Transitioning from Geometric Optics to the Fraunhofer Regime

    Science.gov (United States)

    Panuski, Christopher L.; Mungan, Carl E.

    2016-01-01

    Suppose a red laser beam (of wavelength ? equal to 0.660 µm) is expanded using an optical telescope into a collimated, approximately plane wave that is 5.68 mm in diameter. Pass that beam through a tall rectangular slit whose width "a" is gradually reduced from 3.30 to 0.100 mm. Look at its image on a screen located at a distance…

  2. Application of the method of auxiliary sources to a defect-detection inverse problem of optical diffraction microscopy

    DEFF Research Database (Denmark)

    Karamehmedovic, Mirza; Sørensen, Mads Peter; Hansen, Poul Erik

    2010-01-01

    We propose a method of numerical solution of a type of inverse scattering problem that arises in the optical characterisation/quality control of nanostructures. The underlying global, ill-posed, nonlinear optimisation problem is first localised by best-fit matching of library and measured...... the proposed method, we apply it in a concrete quantitative characterisation of a non-periodic, nano-scale grating defect, with numerically simulated measurements. It is shown that the presented procedure can solve the inverse problem with an accuracy usually thought to require rigorous electromagnetic...... diffraction efficiency patterns. The inverse problem is then solved using piecewise linear interpolation between the best far-field matches. Finally, the results are refined, on average, by solving an additional local optimisation problem formulated in terms of the method of auxiliary sources. To illustrate...

  3. Exoplanet Imaging with a Phase-induced Amplitude Apodization Coronagraph III. Hybrid Approach: Optical Design and Diffraction Analysis

    CERN Document Server

    Pluzhnik, E A; Galicher, R; Guyon, O; Martinache, F; Ridgway, S T; Woodruff, R A

    2005-01-01

    Properly apodized pupils can deliver point spread functions (PSFs) free of Airy rings, and are suitable for high dynamical range imaging of extrasolar terrestrial planets (ETPs). To reach this goal, classical pupil apodization (CPA) unfortunately requires most of the light gathered by the telescope to be absorbed, resulting in poor throughput and low angular resolution. Phase-induced amplitude apodization (PIAA) of the telescope pupil (Guyon 2003) combines the advantages of classical pupil apodization (particularly low sensitivity to low order aberrations) with full throughput, no loss of angular resolution and little chromaticity, which makes it, theoretically, an extremely attractive coronagraph for direct imaging of ETPs. The two most challenging aspects of this technique are (1) the difficulty to polish the required optics shapes and (2) diffraction propagation effects which, because of their chromaticity, can decrease the spectral bandwidth of the coronagraph. We show that a properly designed hybrid syst...

  4. Large deflection angle, high-power adaptive fiber optics collimator with preserved near-diffraction-limited beam quality.

    Science.gov (United States)

    Zhi, Dong; Ma, Yanxing; Chen, Zilun; Wang, Xiaolin; Zhou, Pu; Si, Lei

    2016-05-15

    We report on the development of a monolithic adaptive fiber optics collimator, with a large deflection angle and preserved near-diffraction-limited beam quality, that has been tested at a maximal output power at the 300 W level. Additionally, a new measurement method of beam quality (M2 factor) is developed. Experimental results show that the deflection angle of the collimated beam is in the range of 0-0.27 mrad in the X direction and 0-0.19 mrad in the Y direction. The effective working frequency of the device is about 710 Hz. By employing the new measurement method of the M2 factor, we calculate that the beam quality is Mx2=1.35 and My2=1.24, which is in agreement with the result from the beam propagation analyzer and is preserved well with the increasing output power.

  5. Design of the mirror optical systems for coherent diffractive imaging at the SPB/SFX instrument of the European XFEL

    Science.gov (United States)

    Bean, Richard J.; Aquila, Andrew; Samoylova, Liubov; Mancuso, Adrian P.

    2016-07-01

    The high degree of spatial coherence and extreme pulse energies available at x-ray free electron laser (XFEL) sources naturally support coherent diffractive imaging applications. In order to optimally exploit these unique properties, the optical systems at XFELs must be highly transmissive, focus to appropriate sizes matched to the scale of samples to be investigated and must minimally perturb the wavefront of the XFEL beam. We present the design and simulated performance of two state-of-the-art Kirkpatrik-Baez mirror systems that form the primary foci of the single particles, clusters and biomolecules and serial femtosecond crystallography (SPB/SFX) instrument of the European XFEL. The two systems, presently under construction, will produce 1 μm and 100 nm scale foci across a 3-16 keV photon energy range. Targeted applications include coherent imaging of weakly scattering, often biological, specimens.

  6. Development of a multipurpose vacuum chamber for serial optical and diffraction experiments with free electron laser radiation

    Energy Technology Data Exchange (ETDEWEB)

    Rajkovic, I.; Hallmann, J.; Gruebel, S.; More, R.; Quevedo, W.; Petri, M.; Techert, S. [Department of Structural Dynamics of (Bio)chemical Systems, Max Planck Institute for Biophysical Chemistry, 37070 Goettingen (Germany)

    2010-04-15

    In this paper we present a development of a multipurpose vacuum chamber which primal function is to be used in pump/probe experiments with free electron laser (FEL) radiation. The chamber is constructed for serial diffraction and serial spectroscopy allowing a fast exchange of samples during the measurement process. For the fast exchange of samples, liquid jet systems are used. Both applications, utilizing soft x-ray FEL pulses as pump and optical laser pulses as probe and vice versa are documented. Experiments with solid samples as well as the liquid jet samples are presented. When working with liquid jets, a system of automatically refilled liquid traps for capturing liquids has been developed in order to ensure stable vacuum conditions. Differential pumping stages are placed in between the FEL beamline and the experimental chamber so that working pressure in the chamber can be up to four orders of magnitude higher than the pressure in the FEL beamline.

  7. X-ray-excited optical luminescence of protein crystals: a new tool for studying radiation damage during diffraction data collection.

    Science.gov (United States)

    Owen, Robin L; Yorke, Briony A; Pearson, Arwen R

    2012-05-01

    During X-ray irradiation protein crystals radiate energy in the form of small amounts of visible light. This is known as X-ray-excited optical luminescence (XEOL). The XEOL of several proteins and their constituent amino acids has been characterized using the microspectrophotometers at the Swiss Light Source and Diamond Light Source. XEOL arises primarily from aromatic amino acids, but the effects of local environment and quenching within a crystal mean that the XEOL spectrum of a crystal is not the simple sum of the spectra of its constituent parts. Upon repeated exposure to X-rays XEOL spectra decay non-uniformly, suggesting that XEOL is sensitive to site-specific radiation damage. However, rates of XEOL decay were found not to correlate to decays in diffracting power, making XEOL of limited use as a metric for radiation damage to protein crystals. © 2012 International Union of Crystallography

  8. Optical diffraction tomography using a digital micromirror device for stable measurements of 4D refractive index tomography of cells

    Science.gov (United States)

    Shin, Seungwoo; Kim, Kyoohyun; Kim, Taeho; Yoon, Jonghee; Hong, Kihyun; Park, Jinah; Park, YongKeun

    2016-03-01

    Optical diffraction tomography (ODT) is an interferometric microscopy technique capable of measuring 3-D refractive index (RI) distribution of transparent samples. Multiple 2-D holograms of a sample illuminated with various angles are measured, from which 3-D RI map of the sample is reconstructed via the diffraction theory. ODT has been proved as a powerful tool for the study of biological cells, due to its non-invasiveness, label-free and quantitative imaging capability. Recently, our group has demonstrated that a digital micromirror device (DMD) can be exploited for fast and precise control of illumination beams for ODT. In this work, we systematically study the precision and stability of the ODT system equipped with a DMD and present measurements of 3-D and 4-D RI maps of various types of live cells including human red blood cells, white blood cells, hepatocytes, and HeLa cells. Furthermore, we also demonstrate the effective visualization of 3-D RI maps of live cells utilizing the measured information about the values and gradient of RI tomograms.

  9. Performances for confocal X-ray diffraction technology based on polycapillary slightly focusing X-ray optics

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Hehe; Liu, Zhiguo [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); Sun, Tianxi, E-mail: stxbeijing@163.com [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); Peng, Song [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); Ma, Yongzhong [Center for Disease Control and Prevention of Beijing, Beijing 100013 (China); Sun, Weiyuan; Li, Yude; Lin, Xiaoyan; Zhao, Weigang; Zhao, Guangcui; Luo, Ping; Pan, Qiuli; Ding, Xunliang [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China)

    2013-09-21

    The confocal X-ray diffraction (XRD) technology based on a polycapillary slightly focusing X-ray lens (PSFXRL) in excitation channel and a polycapillary parallel X-ray lens (PPXRL) with a long input focal distance in detection channel was developed. The output focal spot of the PSFXRL and the input focal spot of the PPXRL were adjusted in confocal configuration, and only the X-rays from the volume overlapped by these foci could be accordingly detected. This confocal configuration was helpful in decreasing background. The convergence of the beam focused by the PSFXRL and divergence of the beam which could be collected by the PPXRL with a long input focal distance were both about 9 mrad at 8 keV. This was helpful in improving the resolution of lattice spacing of this confocal XRD technology. The gain in power density of such PSFXRL and PPXRL was about 120 and 7 at 11 keV, respectively, which was helpful in using the low power source to perform XRD analysis efficiently. The performances of this confocal XRD technology were provided, and some common plastics were analyzed. The experimental results demonstrated that the confocal diffraction technology base on polycapillary slightly focusing X-ray optics had wide potential applications.

  10. Optical diffraction tomography using a digital micromirror device for stable measurements of 4-D refractive index tomography of cells

    CERN Document Server

    Shin, Seungwoo; Kim, Taeho; Yoon, Jonghee; Hong, Kihyun; Park, Jinah; Park, YongKeun

    2016-01-01

    Optical diffraction tomography (ODT) is an interferometric microscopy technique capable of measuring 3-D refractive index (RI) distribution of transparent samples. Multiple 2-D holograms of a sample illuminated with various angles are measured, from which 3-D RI map of the sample is reconstructed via the diffraction theory. ODT has been proved as a powerful tool for the study of biological cells, due to its non-invasiveness, label-free and quantitative imaging capability. Recently, our group has demonstrated that a digital micromirror device (DMD) can be exploited for fast and precise control of illumination beams for ODT. In this work, we systematically study the precision and stability of the ODT system equipped with a DMD and present measurements of 3-D and 4-D RI maps of various types of live cells including human red blood cells, white blood cells, hepatocytes, and HeLa cells. Furthermore, we also demonstrate the effective visualization of 3-D RI maps of live cells utilizing the measured information abou...

  11. Conical diffraction effect in optical and x-ray Smith-Purcell radiation

    Directory of Open Access Journals (Sweden)

    D. Yu. Sergeeva

    2015-05-01

    Full Text Available Smith-Purcell radiation is a well-known phenomenon, which provides a noninvasive scheme for diagnostics of charged particle beams and is used as an effective source of electromagnetic waves, e.g., in the orotron, the free electron laser, etc. In this paper we develop the theory of Smith-Purcell radiation (SPR for the little-investigated case of arbitrary angles between the charged particle trajectories and the rulings of a grating. The effect of conical diffraction arising here changes drastically the space distribution of the radiation. By contrast to the only existing approach, described by Haeberle et al. [Phys. Rev. E 55, 4675 (1997], which requires difficult numerical calculations, we give a fully analytic theory of SPR. Also, in this paper we present for the first time the theory of x-ray Smith-Purcell radiation. Evanescent waves on the surface are shown to lead to strong enhancement of Smith-Purcell radiation, through a resonant mechanism. The results are important for the description of real divergent high-brightness beams and for the development of novel noninvasive diagnostic schemes based on the Smith-Purcell effect.

  12. Cryogenic optical test planning using the Optical Telescope Element Simulator with the James Webb Space Telescope Integrated Science Instrument Module

    Science.gov (United States)

    Reichard, Timothy A.; Bond, Nicholas A.; Greeley, Bradford W.; Malumuth, Eliot M.; Melendez, Marcio; Shiri, Ron; Alves de Oliveira, Catarina; Antonille, Scott R.; Birkmann, Stephan; Davis, Clinton; Dixon, William V.; Martel, André R.; Miskey, Cherie L.; Ohl, Raymond G.; Sabatke, Derek; Sullivan, Joseph

    2016-09-01

    NASA's James Webb Space Telescope (JWST) is a 6.5 m diameter, segmented, deployable telescope for cryogenic infrared space astronomy ( 40 K). The JWST Observatory architecture includes the Optical Telescope Element (OTE) and the Integrated Science Instrument Module (ISIM) element that contains four science instruments (SIs), including a guider. The SI and guider units are integrated to the ISIM structure and optically tested at NASA Goddard Space Flight Center as an instrument suite using a telescope simulator (Optical Telescope Element SIMulator; OSIM). OSIM is a high-fidelity, cryogenic JWST telescope simulator that features a 1.5m diameter powered mirror. The SIs are aligned to the flight structure's coordinate system under ambient, clean room conditions using optomechanical metrology and customized interfaces. OSIM is aligned to the ISIM mechanical coordinate system at the cryogenic operating temperature via internal mechanisms and feedback from alignment sensors and metrology in six degrees of freedom. SI performance, including focus, pupil shear, pupil roll, boresight, wavefront error, and image quality, is evaluated at the operating temperature using OSIM. The comprehensive optical test plans include drafting OSIM source configurations for thousands of exposures ahead of the start of a cryogenic test campaign. We describe how we predicted the performance of OSIM light sources illuminating the ISIM detectors to aide in drafting these optical tests before a test campaign began. We also discuss the actual challenges and successes of those exposure predictions encountered during a test campaign to fulfill the demands of the ISIM optical performance verification.

  13. Optical-electronic device based on diffraction optical element for control of special protective tags executed from luminophor

    Science.gov (United States)

    Polyakov, M.; Odinokov, S.

    2017-05-01

    The report focuses on special printing industry, which is called secure printing, which uses printing techniques to prevent forgery or falsification of security documents. The report considered the possibility of establishing a spectral device for determining the authenticity of certain documents that are protected by machine-readable luminophor labels. The device works in two spectral ranges - visible and near infrared that allows to register Stokes and anti-Stokes spectral components of protective tags. The proposed device allows verification of the authenticity of security documents based on multiple criteria in different spectral ranges. It may be used at enterprises related to the production of security printing products, expert units of law enforcement bodies at check of authenticity of banknotes and other structures.

  14. hp-finite-elements for simulating electromagnetic fields in optical devices with rough textures

    CERN Document Server

    Burger, S; Hammerschmidt, M; Herrmann, S; Pomplun, J; Schmidt, F; Wohlfeil, B; Zschiedrich, L

    2015-01-01

    The finite-element method is a preferred numerical method when electromagnetic fields at high accuracy are to be computed in nano-optics design. Here, we demonstrate a finite-element method using hp-adaptivity on tetrahedral meshes for computation of electromagnetic fields in a device with rough textures. The method allows for efficient computations on meshes with strong variations in element sizes. This enables to use precise geometry resolution of the rough textures. Convergence to highly accurate results is observed.

  15. Tunable nano-wrinkling of chiral surfaces: Structure and diffraction optics

    Energy Technology Data Exchange (ETDEWEB)

    Rofouie, P.; Rey, A. D., E-mail: alejandro.rey@mail.mcgill.ca [Department of Chemical Engineering, McGill University, 3610 University Street, Montreal, Quebec H3A 2B2 (Canada); Pasini, D. [Department of Mechanical Engineering, McGill University, 817 Sherbrook West, Montreal, Quebec H3A 0C3 (Canada)

    2015-09-21

    Periodic surface nano-wrinkling is found throughout biological liquid crystalline materials, such as collagen films, spider silk gland ducts, exoskeleton of beetles, and flower petals. These surface ultrastructures are responsible for structural colors observed in some beetles and plants that can dynamically respond to external conditions, such as humidity and temperature. In this paper, the formation of the surface undulations is investigated through the interaction of anisotropic interfacial tension, swelling through hydration, and capillarity at free surfaces. Focusing on the cellulosic cholesteric liquid crystal (CCLC) material model, the generalized shape equation for anisotropic interfaces using the Cahn-Hoffman capillarity vector and the Rapini-Papoular anchoring energy are applied to analyze periodic nano-wrinkling in plant-based plywood free surfaces with water-induced cholesteric pitch gradients. Scaling is used to derive the explicit relations between the undulations’ amplitude expressed as a function of the anchoring strength and the spatially varying pitch. The optical responses of the periodic nano-structured surfaces are studied through finite difference time domain simulations indicating that CCLC surfaces with spatially varying pitch reflect light in a wavelength higher than that of a CCLC’s surface with constant pitch. This structural color change is controlled by the pitch gradient through hydration. All these findings provide a foundation to understand structural color phenomena in nature and for the design of optical sensor devices.

  16. Tunable nano-wrinkling of chiral surfaces: Structure and diffraction optics

    Science.gov (United States)

    Rofouie, P.; Pasini, D.; Rey, A. D.

    2015-09-01

    Periodic surface nano-wrinkling is found throughout biological liquid crystalline materials, such as collagen films, spider silk gland ducts, exoskeleton of beetles, and flower petals. These surface ultrastructures are responsible for structural colors observed in some beetles and plants that can dynamically respond to external conditions, such as humidity and temperature. In this paper, the formation of the surface undulations is investigated through the interaction of anisotropic interfacial tension, swelling through hydration, and capillarity at free surfaces. Focusing on the cellulosic cholesteric liquid crystal (CCLC) material model, the generalized shape equation for anisotropic interfaces using the Cahn-Hoffman capillarity vector and the Rapini-Papoular anchoring energy are applied to analyze periodic nano-wrinkling in plant-based plywood free surfaces with water-induced cholesteric pitch gradients. Scaling is used to derive the explicit relations between the undulations' amplitude expressed as a function of the anchoring strength and the spatially varying pitch. The optical responses of the periodic nano-structured surfaces are studied through finite difference time domain simulations indicating that CCLC surfaces with spatially varying pitch reflect light in a wavelength higher than that of a CCLC's surface with constant pitch. This structural color change is controlled by the pitch gradient through hydration. All these findings provide a foundation to understand structural color phenomena in nature and for the design of optical sensor devices.

  17. James Webb Space Telescope Optical Telescope Element/Integrated Science Instrument Module (OTIS) Status

    Science.gov (United States)

    Feinberg, Lee; Voyton, Mark; Lander, Juli; Keski-Kuha, Ritva; Matthews, Gary

    2016-01-01

    The James Webb Space Telescope Optical Telescope Element (OTE) and Integrated Science Instrument Module (ISIM) are integrated together to form the OTIS. Once integrated, the OTIS undergoes primary mirror center of curvature optical tests, electrical and operational tests, acoustics and vibration testing at the Goddard Space Flight Center before being shipped to the Johnson Space Center for cryogenic optical testing of the OTIS. In preparation for the cryogenic optical testing, the JWST project has built a Pathfinder telescope and has completed two Optical Ground System Equipment (OGSE) cryogenic optical tests with the Pathfinder. In this paper, we will summarize optical test results to date and status the final Pathfinder test and the OTIS integration and environmental test preparations

  18. Radiative properties of diffractively-coupled optical nano-antennas with helical geometry.

    Science.gov (United States)

    Wang, Ren; Forestiere, Carlo; Dal Negro, Luca

    2015-10-01

    In this paper, using the rigorous Surface Integral Equation (SIE) method, we study light scattering by Au nano-helices with geometrical dimensions comparable to the wavelength of visible light and we demonstrate that they behave as highly directional nano-antennas with largely controllable radiation and polarization characteristics in the optical regime. In particular, we systematically investigate the radiation properties of helical nano-antennas with realistic Au dispersion parameters in the visible spectral range, and we establish general design rules that enable the engineering of directional scattering with elliptical or circular polarization. Given the realistic material and geometric parameters used in this work, our findings provide novel opportunities for the engineering of chiral sensors, filters, and components for nano-scale antennas with unprecedented beam forming and polarization capabilities.

  19. AOLI-- Adaptive Optics Lucky Imager: Diffraction Limited Imaging in the Visible on Large Ground-Based Telescopes

    CERN Document Server

    Mackay, Craig; Castellá, Bruno Femenia; Crass, Jonathan; King, David L; Labadie, Lucas; Aisher, Peter; Garrido, Antonio Pérez; Balcells, Marc; Díaz-Sánchez, Anastasio; Fuensalida, Jesús Jimenez; Lopez, Roberto L; Oscoz, Alejandro; Prieto, Jorge A Pérez; Rodríguez-Ramos, Luis F; Villó, Isidro

    2012-01-01

    The highest resolution images ever taken in the visible were obtained by combining Lucky Imaging and low order adaptive optics. This paper describes a new instrument to be deployed on the WHT 4.2m and GTC 10.4 m telescopes on La Palma, with particular emphasis on the optical design and the expected system performance. A new design of low order wavefront sensor using photon counting CCD detectors and multi-plane curvature wavefront sensor will allow dramatically fainter reference stars to be used, allowing virtually full sky coverage with a natural guide star. This paper also describes a significant improvements in the efficiency of Lucky Imaging, important advances in wavefront reconstruction with curvature sensors and the results of simulations and sensitivity limits. With a 2 x 2 array of 1024 x 1024 photon counting EMCCDs, AOLI is likely to be the first of the new class of high sensitivity, near diffraction limited imaging systems giving higher resolution in the visible from the ground than hitherto been p...

  20. Visual and optical performance of diffractive multifocal intraocular lenses with different haptic designs: 6 month follow-up.

    Science.gov (United States)

    Wang, Mengmeng; Corpuz, Christine Carole C; Fujiwara, Megumi; Tomita, Minoru

    2014-01-01

    To evaluate and compare the visual acuity outcomes and optical performances of eyes implanted with two diffractive multifocal intraocular lens (IOL) models with either a plate haptic design or a modified-C design. This retrospective study comprised cataract patients who were implanted with either a plate haptic multifocal IOL model (Acriva(UD) Reviol BB MFM 611 [VSY Biotechnology, Amsterdam, the Netherlands], group 1) or a modified-C haptic multifocal IOL model (Acriva(UD) Reviol BB MF 613 [VSY Biotechnology, Amsterdam, the Netherlands], group 2) between June 2012 and May 2013. The 6 month postoperative visual acuity, refraction, defocus curve, contrast sensitivity, and wave-front aberration were evaluated and compared between these eyes, using different IOL models. One hundred fifty-eight eyes of 107 patients were included in this study. Significant improvement in visual acuities and refraction was found in both groups after cataract surgery (P0.05). However, the ocular higher-order aberrations in group 2 were significantly greater than in group 1 (Phaptic design resulted in better optical performances than that with the modified-C haptic design.

  1. Improvement of diffraction efficiency of three-dimensional magneto-optic spatial light modulator with magnetophotonic crystal

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, K.; Takagi, H., E-mail: takagi@ee.tut.ac.jp; Lim, P. B.; Inoue, M., E-mail: inoue@tut.ac.jp [Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology, Toyohashi, Aichi 441 8580 (Japan); Goto, Taichi [Department of Electrical and Electronic Information Engineering, Toyohashi University of Technology, Toyohashi, Aichi 441 8580 (Japan); JST, PRESTO, 4-1-8 Honcho, Kawaguchi, Saitama 332-0012 (Japan); Horimai, H. [HolyMine Corporation, Atsugi, Kanagawa 243 0813 (Japan); Yoshikawa, H. [Department of Computer Engineering, College of Science and Technology, Nihon University, Funabashi, Chiba 274 8501 (Japan); Bove, V. M. [MIT Media Lab, Cambridge, Massachusetts 02139 (United States)

    2016-01-11

    We have developed three-dimensional magneto-optic spatial light modulators (3D-MOSLMs) that use magnetic domains as submicron scale pixels to represent holograms. Our display system uses a submicron-scale magnetic pixel array on an amorphous TbFe film to create a wide viewing angle hologram. However, in previous work the reconstructed images had a low intensity and a low optical contrast; brightness of the reconstructed image was 4.4 × 10{sup −2 }cd/m{sup 2} with 532 nm illumination light at 10.8 mW/cm{sup 2}, while display standard ISO13406 recommends 100 cd/m{sup 2} or more. In this paper, we describe our development of a 3D-MOSLM composed of an artificial magnetic lattice structure of magnetophotonic crystals (MPCs). The MPCs enhance the diffraction efficiency of reconstructed 3D images and reduce the power consumption for controlling the magnetic pixels by a light localization effect. We demonstrate reconstructed 3D images using the MPC and show significant brightness improvement.

  2. Generation of Multiphoton Entangled States with Linear Optical Elements

    Institute of Scientific and Technical Information of China (English)

    SHENG Yu-Bo; DENG Fu-Guo; ZHOU Hong-Yu

    2008-01-01

    We propose a linear optical protocol to generate three-photon and four-photon entangled states without resorting to entangled sources. The setup in this protocol is composed of three beam splitters and two half-wave plates.We can obtain three-photon and four-photon entangled states with postselection, as with other protocols. This protocol has the advantage of high efficiency and is more feasible than others.

  3. Performance optimization in mass production of volume holographic optical elements (vHOEs) using Bayfol HX photopolymer film

    Science.gov (United States)

    Bruder, Friedrich-Karl; Fäcke, Thomas; Grote, Fabian; Hagen, Rainer; Hönel, Dennis; Koch, Eberhard; Rewitz, Christian; Walze, Günther; Wewer, Brita

    2017-05-01

    Volume Holographic Optical Elements (vHOEs) gained wide attention as optical combiners for the use in smart glasses and augmented reality (SG and AR, respectively) consumer electronics and automotive head-up display applications. The unique characteristics of these diffractive grating structures - being lightweight, thin and flat - make them perfectly suitable for use in integrated optical components like spectacle lenses and car windshields. While being transparent in Off-Bragg condition, they provide full color capability and adjustable diffraction efficiency. The instant developing photopolymer Bayfol® HX film provides an ideal technology platform to optimize the performance of vHOEs in a wide range of applications. Important for any commercialization are simple and robust mass production schemes. In this paper, we present an efficient and easy to control one-beam recording scheme to copy a so-called master vHOE in a step-and-repeat process. In this contact-copy scheme, Bayfol® HX film is laminated to a master stack before being exposed by a scanning laser line. Subsequently, the film is delaminated in a controlled fashion and bleached. We explain working principles of the one-beam copy concept, discuss the opto-mechanical construction and outline the downstream process of the installed vHOE replication line. Moreover, we focus on aspects like performance optimization of the copy vHOE, the bleaching process and the suitable choice of protective cover film in the re-lamination step, preparing the integration of the vHOE into the final device.

  4. Optical diffraction into thick slab waveguides: a finite-beam RCWA approach to solve extremely asymmetrical scattering-EAS in slanted holographic gratings

    Science.gov (United States)

    Pietralunga, Silvia M.; Geroldi, Alessandro; Serafini, Mirko

    2012-06-01

    We have implemented a Finite-Beam Rigorous Coupled-Wave Approach (FB-RCWA) to solve for guided-optics propagation in the presence of holographic slanted Bragg gratings, embedded in the core of slab waveguides and operated in Extreme Asymmetrical Scattering (EAS) configuration. In EAS a resonance condition can be established, as proceeding from the design parameters. Diffraction efficiency can be evaluated as the ratio of the flux of diffracted power P1, on a suitably defined cross-section along the propagation of diffracted beam, and input power P0. By FBRCWA, no limitation in the depth of grating modulation is assumed. The first-order diffracted field in resonant Bragg condition propagates along the waveguide. EAS in thick waveguides operating in highly multimodal regime can be investigated, as well as macroscopic volumes and widely extended illuminated regions up to a few millimeters. In thick slabs, η > 90% is demonstrated, for input illuminated apertures of length L >= Lc, where Lc is the optimum coupling length. The effects of detuning from Bragg condition, both in distribution and amplitude of the diffracted field, are quantified. Diffraction efficiency, i.e. optical coupling, bandwidth is evaluated.

  5. Diffraction of a Gaussian beam in a three-dimensional smoothly inhomogeneous medium: an eikonal-based complex geometrical-optics approach.

    Science.gov (United States)

    Berczynski, Pawel; Bliokh, Konstantin Yu; Kravtsov, Yuri A; Stateczny, Andrzej

    2006-06-01

    We present an ab initio account of the paraxial complex geometrical optics (CGO) in application to scalar Gaussian beam propagation and diffraction in a 3D smoothly inhomogeneous medium. The paraxial CGO deals with quadratic expansion of the complex eikonal and reduces the wave problem to the solution of ordinary differential equations of the Riccati type. This substantially simplifies the description of Gaussian beam diffraction as compared with full-wave or parabolic (quasi-optics) equations. For a Gaussian beam propagating in a homogeneous medium or along the symmetry axis in a lenslike medium, the CGO equations possess analytical solutions; otherwise, they can be readily solved numerically. As a nontrivial example we consider Gaussian beam propagation and diffraction along a helical ray in an axially symmetric waveguide medium. It is shown that the major axis of the beam's elliptical cross section grows unboundedly; it is oriented predominantly in the azimuthal (binormal) direction and does not obey the parallel-transport law.

  6. Measurement of grain size of polycrystalline materials with confocal energy dispersive micro-X-ray diffraction technology based on polycapillary X-ray optics

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Weiyuan; Liu, Zhiguo [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); Sun, Tianxi, E-mail: stx@bnu.edu.cn [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); Peng, Song [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); Ma, Yongzhong [Center for Disease Control and Prevention of Beijing, Beijing 100013 (China); Li, Fangzuo; Sun, Xuepeng; Ding, Xunliang [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China)

    2014-11-11

    The confocal energy dispersive micro-X-ray diffraction (EDMXRD) based on polycapillary X-ray optics was used to determine the grain size of polycrystalline materials. The grain size of a metallographic specimen of nickel base alloy was measured by using the confocal EDMXRD. The experimental results demonstrated that the confocal EDMXRD had potential applications in measuring large grain size.

  7. Broadband multilayer mirror and diffractive optics for attosecond pulse shaping in the 280-500 eV photon energy range

    Directory of Open Access Journals (Sweden)

    Schmidt J.

    2013-03-01

    Full Text Available Chirped broadband multilayer mirrors are key components to shape attosecond pulses in the XUV range. Compressing high harmonic pulses to their Fourier limit is the major goal for attosecond physics utilizing short pulse pump-probe experiments. Here, we report about the first implementation of multilayers and diffractive optics fulfilling these requirements in the “water-window” spectral range.

  8. The at-wavelength metrology facility for UV- and XUV-reflection and diffraction optics at BESSY-II

    Energy Technology Data Exchange (ETDEWEB)

    Schäfers, F., E-mail: franz.schaefers@helmholtz-berlin.de; Bischoff, P.; Eggenstein, F.; Erko, A.; Gaupp, A.; Künstner, S.; Mast, M.; Schmidt, J.-S.; Senf, F.; Siewert, F.; Sokolov, A.; Zeschke, Th. [Helmholtz-Zentrum Berlin, Albert-Einstein-Strasse 15, Berlin 12489 (Germany)

    2016-01-01

    A new optics beamline and a versatile 11-axes UHV-reflectometer for at-wavelength characterization of real life-sized UV- and XUV-reflection gratings and other (nano-) optical elements has been set up and is in operation at BESSY-II. Azimuthal rotation of samples allows for reflectometry and polarimetry measurements in s- and p-polarization. A technology center for the production of high-precision reflection gratings has been established. Within this project a new optics beamline and a versatile reflectometer for at-wavelength characterization of UV- and XUV-reflection gratings and other (nano-) optical elements has been set up at BESSY-II. The Plane Grating Monochromator beamline operated in collimated light (c-PGM) is equipped with an SX700 monochromator, of which the blazed gratings (600 and 1200 lines mm{sup −1}) have been recently exchanged for new ones of improved performance produced in-house. Over the operating range from 10 to 2000 eV this beamline has very high spectral purity achieved by (i) a four-mirror arrangement of different coatings which can be inserted into the beam at different angles and (ii) by absorber filters for high-order suppression. Stray light and scattered radiation is removed efficiently by double sets of in situ exchangeable apertures and slits. By use of in- and off-plane bending-magnet radiation the beamline can be adjusted to either linear or elliptical polarization. One of the main features of a novel 11-axes reflectometer is the possibility to incorporate real life-sized gratings. The samples are adjustable within six degrees of freedom by a newly developed UHV-tripod system carrying a load up to 4 kg, and the reflectivity can be measured between 0 and 90° incidence angle for both s- and p-polarization geometry. This novel powerful metrology facility has gone into operation recently and is now open for external users. First results on optical performance and measurements on multilayer gratings will be presented here.

  9. A high-accuracy optical linear algebra processor for finite element applications

    Science.gov (United States)

    Casasent, D.; Taylor, B. K.

    1984-01-01

    Optical linear processors are computationally efficient computers for solving matrix-matrix and matrix-vector oriented problems. Optical system errors limit their dynamic range to 30-40 dB, which limits their accuray to 9-12 bits. Large problems, such as the finite element problem in structural mechanics (with tens or hundreds of thousands of variables) which can exploit the speed of optical processors, require the 32 bit accuracy obtainable from digital machines. To obtain this required 32 bit accuracy with an optical processor, the data can be digitally encoded, thereby reducing the dynamic range requirements of the optical system (i.e., decreasing the effect of optical errors on the data) while providing increased accuracy. This report describes a new digitally encoded optical linear algebra processor architecture for solving finite element and banded matrix-vector problems. A linear static plate bending case study is described which quantities the processor requirements. Multiplication by digital convolution is explained, and the digitally encoded optical processor architecture is advanced.

  10. The Study of Optically Induced Effects due to Bending and Twisting using Vector Finite Element Method

    Energy Technology Data Exchange (ETDEWEB)

    Dacles-Mariani, J; Rodrigue, G

    2005-05-11

    We study the effects of macroscopic bends and twists in an optical waveguide and how they influence the transmission capabilities of a waveguide. These mechanical stresses and strains distort the optical indicatrix of the medium producing optical anisotropy. The spatially varying refractive indices are incorporated into the full-wave Maxwell's equations. The governing equations are discretized using a vector finite element method cast in a high-order finite element approximation. This approach allows us to study the complexities of the mechanical deformation within a framework of a high-order formulation which can in turn, reduce the computational requirement without degrading its performance. The optical activities generated, total energy produced and power loss due to the mechanical stresses and strains are reported and discussed.

  11. Electron transfer in a virtual quantum state of LiBH4 induced by strong optical fields and mapped by femtosecond x-ray diffraction.

    Science.gov (United States)

    Stingl, J; Zamponi, F; Freyer, B; Woerner, M; Elsaesser, T; Borgschulte, A

    2012-10-05

    Transient polarizations connected with a spatial redistribution of electronic charge in a mixed quantum state are induced by optical fields of high amplitude. We determine for the first time the related transient electron density maps, applying femtosecond x-ray powder diffraction as a structure probe. The prototype ionic material LiBH4 driven nonresonantly by an intense sub-40 fs optical pulse displays a large-amplitude fully reversible electron transfer from the BH4(-) anion to the Li+ cation during excitation. Our results establish this mechanism as the source of the strong optical polarization which agrees quantitatively with theoretical estimates.

  12. Breaking the diffraction-limited resolution barrier in fiber-optical two-photon fluorescence endoscopy by an azimuthally-polarized beam.

    Science.gov (United States)

    Gu, Min; Kang, Hong; Li, Xiangping

    2014-01-10

    Although fiber-optical two-photon endoscopy has been recognized as a potential high-resolution diagnostic and therapeutic procedure in vivo, its resolution is limited by the optical diffraction nature to a few micrometers due to the low numerical aperture of an endoscopic objective. On the other hand, stimulated emission depletion (STED) achieved by a circularly-polarized vortex beam has been used to break the diffraction-limited resolution barrier in a bulky microscope. It has been a challenge to apply the STED principle to a fiber-optical two-photon endoscope as a circular polarization state cannot be maintained due to the birefringence of a fiber. Here, we demonstrate the first fiber-optical STED two-photon endoscope using an azimuthally-polarized beam directly generated from a double-clad fiber. As such, the diffraction-limited resolution barrier of fiber-optical two-photon endoscopy can be broken by a factor of three. Our new accomplishment has paved a robust way for high-resolution in vivo biomedical studies.

  13. Some optical characteristics of powders of rare element tellurites

    Energy Technology Data Exchange (ETDEWEB)

    Voloshina, A.L.; Ivanchenko, L.A.; Obolonchik, V.A.; Lugovskaya, E.S. (AN Ukrainskoj SSR, Kiev. Inst. Problem Materialovedeniya)

    1982-09-01

    Optical properties of rare earth tellurites (except Ce and Pm) of Lu/sub 2/Te/sub 3/O/sub 9/ composition are studied. It is stated that crystallization of La tellurite specimens with elevation of the treatment temperature induces an increase in the refractive index, leads to transition from itotropism of particles with a cubic crystal system to emergence of long-prismshape grains, birefringence; orientation dependence of the refractive index is traced. It is shown that La/sub 2/Te/sub 3/O/sub 9/-type compounds by the pattern of their interaction with light may be referred to semiconductors with a h..nu.. >= 3.8 eV band gap. It is demonstrated through the La/sub 2/Te/sub 3/O/sub 9/ example that heat treatment of an air-dry specimen at temperatures above 400 deg C leads to a decrease of the band gap in the compounds of concern and to an increase of the light absorption factor within a photon energy range of h..nu.. > 4 eV.

  14. Characterization of X-Ray Diffraction System with a Microfocus X-Ray Source and a Polycapillary Optic

    Science.gov (United States)

    Gubarev, Mikhail; Marshall, Joy K.; Ciszak, Ewa; Ponomarev, Igor

    2000-01-01

    We present here an optimized microfocus x-ray source and polycapillary optic system designed for diffraction of small protein crystals. The x-ray beam is formed by a 5.5mm focal length capillary collimator coupled with a 40 micron x-ray source operating at 46Watts. Measurements of the x-ray flux, the divergence and the spectral characteristics of the beam are presented, This optimized system provides a seven fold greater flux than our recently reported configuration [M. Gubarev, et al., J. of Applied Crystallography (2000) 33, in press]. We now make a comparison with a 5kWatts rotating anode generator (Rigaku) coupled with confocal multilayer focusing mirrors (Osmic, CMF12- 38Cu6). The microfocus x-ray source and polycapillary collimator system delivers 60% of the x-ray flux from the rotating anode system. Additional ways to improve our microfocus x-ray system, and thus increase the x-ray flux will be discussed.

  15. Optimal Design of a Secondary Optical Element for a Noncoplanar Two-Reflector Solar Concentrator

    Directory of Open Access Journals (Sweden)

    Yi-Cheng Chen

    2015-01-01

    Full Text Available This paper presents the results of a parametric design process used to achieve an optimal secondary optical element (SOE in a noncoplanar solar concentrator composed of two reflectors. The noncoplanar solar concentrator comprises a primary parabolic mirror (M1 and a secondary hyperbolic mirror (M2. The optical performance (i.e., acceptance angle, optical efficiency, and irradiance distribution of concentrators with various SOEs was compared using ray-tracing simulation. The parametric design process for the SOE was divided into two phases, and an optimal SOE was obtained. The sensitivity to assembly errors of the solar concentrator when using the optimal SOE was studied and the findings are discussed.

  16. Design of the Secondary Optical Elements for Concentrated Photovoltaic Units with Fresnel Lenses

    Directory of Open Access Journals (Sweden)

    Yi-Cheng Chen

    2015-10-01

    Full Text Available The goal of this presented study was to determine the optimum parameters of secondary optical elements (SOEs for concentrated photovoltaic (CPV units with flat Fresnel lenses. Three types of SOEs are under consideration in the design process, including kaleidoscope with equal optical path design (KOD, kaleidoscope with flat top surface (KFTS, and open-truncated tetrahedral pyramid with specular walls (SP. The function of using a SOE with a Fresnel lens in a CPV unit is to achieve high optical efficiency, low sensitivity to the sun tracking error, and improved uniformity of irradiance distribution on the solar cell. Ray tracing technique was developed to simulate the optical characteristics of the CPV unit with various design parameters of each type of SOE. Finally, an optimum KOD-type SOE was determined by parametric design process. The resulting optical performance of the CPV unit with the optimum SOE was evaluated in both single-wavelength and broadband simulation of solar spectrum.

  17. Optics

    CERN Document Server

    Fincham, W H A

    2013-01-01

    Optics: Ninth Edition Optics: Ninth Edition covers the work necessary for the specialization in such subjects as ophthalmic optics, optical instruments and lens design. The text includes topics such as the propagation and behavior of light; reflection and refraction - their laws and how different media affect them; lenses - thick and thin, cylindrical and subcylindrical; photometry; dispersion and color; interference; and polarization. Also included are topics such as diffraction and holography; the limitation of beams in optical systems and its effects; and lens systems. The book is recommen

  18. Mass production of volume holographic optical elements (vHOEs) using Bayfol® HX photopolymer film in a roll-to-roll copy process

    Science.gov (United States)

    Bruder, Friedrich-Karl; Fäcke, Thomas; Grote, Fabian; Hagen, Rainer; Hönel, Dennis; Koch, Eberhard; Rewitz, Christian; Walze, Günther; Wewer, Brita

    2017-03-01

    Volume Holographic Optical Elements (vHOEs) gained wide attention as optical combiners for the use in augmented and virtual reality (AR and VR, respectively) consumer electronics and automotive head-up display applications. The unique characteristics of these diffractive grating structures - being lightweight, thin and flat - make them perfectly suitable for use in integrated optical components like spectacle lenses and car windshields. While being transparent in Off-Bragg condition, they provide full color capability and adjustable diffraction efficiency. The instant developing photopolymer Bayfol® HX film provides an ideal technology platform to optimize the performance of vHOEs in a wide range of applications. Important for any commercialization are simple and robust mass production schemes. In this paper, we present an efficient and easy to control one-beam recording scheme to copy a so-called master vHOE in a step-and-repeat process. In this contact-copy scheme, Bayfol® HX film is laminated to a master stack before being exposed by a scanning laser line. Subsequently, the film is delaminated in a controlled fashion and bleached. We explain working principles of the one-beam copy concept and discuss the mechanical construction of the installed vHOE replication line. Moreover, we treat aspects like master design, effects of vibration and suppression of noise gratings. Furthermore, digital vHOEs are introduced as master holograms. They enable new ways of optical design and paths to large scale vHOEs.

  19. Nanoscale femtosecond imaging of transient hot solid density plasmas with elemental and charge state sensitivity using resonant coherent diffraction

    CERN Document Server

    Kluge, Thomas; Chung, H -K; Gutt, C; Huang, L G; Zacharias, M; Schramm, U; Cowan, T E

    2015-01-01

    Here we propose to exploit the low energy bandwidth, small wavelength and penetration power of ultrashort pulses from XFELs for resonant Small Angle Scattering (SAXS) on plasma structures in laser excited plasmas. Small angle scattering allows to detect nanoscale density fluctuations in forward scattering direction. Typically, the SAXS signal from laser excited plasmas is expected to be dominated by the free electron distribution. We propose that the ionic scattering signal becomes visible when the X-ray energy is in resonance with an electron transition between two bound states (Resonant coherent X-ray diffraction, RCXD). In this case the scattering cross-section dramatically increases so that the signal of X-ray scattering from ions silhouettes against the free electron scattering background which allows to measure the opacity and derived quantities with high spatial and temporal resolution, being fundamentally limited only by the X-ray wavelength and timing. Deriving quantities such as ion spatial distribu...

  20. Inductively Coupled Plasma Optical-Emission Spectroscopy Determination of Major and Minor Elements in Vinegar

    Directory of Open Access Journals (Sweden)

    Arzu AKPINAR-BAYIZIT

    2010-12-01

    Full Text Available This study characterizes the mineral content of vinegar samples. The concentrations of Na, K, Ca, Mg and P (major elements as well as Fe, Mn, Sn, Cu, Ni, Zn, Pb and Cd (minor elements were determined in 35 commercial vinegar samples using inductively coupled plasma optical-emission spectrometry (ICP-OES. The elements with the highest concentrations were K, Na, Ca, Mg and P. The concentrations of heavy metals in the vinegar samples, including Cd, Ni, Sn and Pb, were not considered a health risk.

  1. The at-wavelength metrology facility for UV- and XUV-reflection and diffraction optics at BESSY-II.

    Science.gov (United States)

    Schäfers, F; Bischoff, P; Eggenstein, F; Erko, A; Gaupp, A; Künstner, S; Mast, M; Schmidt, J-S; Senf, F; Siewert, F; Sokolov, A; Zeschke, Th

    2016-01-01

    A technology center for the production of high-precision reflection gratings has been established. Within this project a new optics beamline and a versatile reflectometer for at-wavelength characterization of UV- and XUV-reflection gratings and other (nano-) optical elements has been set up at BESSY-II. The Plane Grating Monochromator beamline operated in collimated light (c-PGM) is equipped with an SX700 monochromator, of which the blazed gratings (600 and 1200 lines mm(-1)) have been recently exchanged for new ones of improved performance produced in-house. Over the operating range from 10 to 2000 eV this beamline has very high spectral purity achieved by (i) a four-mirror arrangement of different coatings which can be inserted into the beam at different angles and (ii) by absorber filters for high-order suppression. Stray light and scattered radiation is removed efficiently by double sets of in situ exchangeable apertures and slits. By use of in- and off-plane bending-magnet radiation the beamline can be adjusted to either linear or elliptical polarization. One of the main features of a novel 11-axes reflectometer is the possibility to incorporate real life-sized gratings. The samples are adjustable within six degrees of freedom by a newly developed UHV-tripod system carrying a load up to 4 kg, and the reflectivity can be measured between 0 and 90° incidence angle for both s- and p-polarization geometry. This novel powerful metrology facility has gone into operation recently and is now open for external users. First results on optical performance and measurements on multilayer gratings will be presented here.

  2. Optical Simulation and Experimental Verification of a Fresnel Solar Concentrator with a New Hybrid Second Optical Element

    Directory of Open Access Journals (Sweden)

    Guiqiang Li

    2016-01-01

    Full Text Available Fresnel solar concentrator is one of the most common solar concentrators in solar applications. For high Fresnel concentrating PV or PV/T systems, the second optical element (SOE is the key component for the high optical efficiency at a wider deflection angle, which is important for overcoming unavoidable errors from the tacking system, the Fresnel lens processing and installment technology, and so forth. In this paper, a new hybrid SOE was designed to match the Fresnel solar concentrator with the concentration ratio of 1090x. The ray-tracing technology was employed to indicate the optical properties. The simulation outcome showed that the Fresnel solar concentrator with the new hybrid SOE has a wider deflection angle scope with the high optical efficiency. Furthermore, the flux distribution with different deviation angles was also analyzed. In addition, the experiment of the Fresnel solar concentrator with the hybrid SOE under outdoor condition was carried out. The verifications from the electrical and thermal outputs were all made to analyze the optical efficiency comprehensively. The optical efficiency resulting from the experiment is found to be consistent with that from the simulation.

  3. Multipoint laser Doppler vibrometry using holographic optical elements and a CMOS digital camera.

    Science.gov (United States)

    Connelly, Michael J; Szecówka, Przemyslaw M; Jallapuram, Raghavendra; Martin, Suzanne; Toal, Vincent; Whelan, Maurice P

    2008-02-15

    A laser Doppler vibrometer (LDV) is described in which holographic optical elements are used to provide the interferometer reference and object illumination beams. A complementary metal-oxide semiconductor camera, incorporating a digital signal processor, is used to carry out real-time signal processing of the interferometer output to allow multipoint LDV to be implemented.

  4. Scheme for Realizing Probabilistic Teleportation of Bipartite Photonic States via Linear Optical Elements

    Institute of Scientific and Technical Information of China (English)

    DONG Ping; LIN Ji-Cheng; YANG Ming; CAO Zhuo-Liang

    2006-01-01

    We propose a probabilistic scheme for realizing teleportation of bipartite photonic states using linear optical elements where only requires a two-photon Bell state used as quantum channel. It reduces the requirement of the entanglement of quantum channel, but requires an additional photon and an auxiliary maximally entangled photon pair locally.

  5. Hyperspectral optical diffraction tomography

    CERN Document Server

    Jung, JaeHwang; Yoon, Jonghee; Park, YongKeun

    2015-01-01

    Here, we present a novel microscopic technique for measuring wavelength-dependent three-dimensional (3-D) distributions of the refractive indices (RIs) of microscopic samples in the visible wavelengths. Employing 3-D quantitative phase microscopy techniques with a wavelength-swept source, 3-D RI tomograms were obtained in the range of 450 - 700 nm with a spectral resolution of a few nanometers. The capability of the technique was demonstrated by measuring the hyperspectral 3-D RI tomograms of polystyrene beads, human red blood cells, and hepatocytes. The results demonstrate the potential for label-free molecular specific 3-D tomography of biological samples.

  6. Multi-elemental analysis of aqueous geological samples by inductively coupled plasma-optical emission spectrometry

    Science.gov (United States)

    Todorov, Todor I.; Wolf, Ruth E.; Adams, Monique

    2014-01-01

    Typically, 27 major, minor, and trace elements are determined in natural waters, acid mine drainage, extraction fluids, and leachates of geological and environmental samples by inductively coupled plasma-optical emission spectrometry (ICP-OES). At the discretion of the analyst, additional elements may be determined after suitable method modifications and performance data are established. Samples are preserved in 1–2 percent nitric acid (HNO3) at sample collection or as soon as possible after collection. The aqueous samples are aspirated into the ICP-OES discharge, where the elemental emission signals are measured simultaneously for 27 elements. Calibration is performed with a series of matrix-matched, multi-element solution standards.

  7. Tunable photonic elements at the surface of an optical fiber with piezoelectric core

    CERN Document Server

    Dmitriev, Artemiy V

    2016-01-01

    Tunable photonic elements at the surface of an optical fiber with piezoelectric core are proposed and analyzed theoretically. These elements are based on whispering gallery modes whose propagation along the fiber is fully controlled by nanoscale variation of the effective fiber radius, which can be tuned by means of a piezoelectric actuator embedded into the core. The developed theory allows one to express the introduced effective radius variation through the shape of the actuator and the voltage applied to it. In particular, the design of a miniature tunable optical delay line and a miniature tunable dispersion compensator is presented. The potential application of the suggested model to the design of a miniature optical buffer is discussed.

  8. Recent progress in see-through three-dimensional displays using holographic optical elements [Invited].

    Science.gov (United States)

    Jang, Changwon; Lee, Chang-Kun; Jeong, Jinsoo; Li, Gang; Lee, Seungjae; Yeom, Jiwoon; Hong, Keehoon; Lee, Byoungho

    2016-01-20

    The principles and characteristics of see-through 3D displays are presented. We especially focus on the integral-imaging display system using a holographic optical element (IDHOE), which is able to display 3D images and satisfy the see-through property at the same time. The technique has the advantage of the high transparency and capability of displaying autostereoscopic 3D images. We have analyzed optical properties of IDHOE for both recording and displaying stages. Furthermore, various studies of new applications and system improvements for IDHOE are introduced. Thanks to the characteristics of holographic volume grating, it is possible to implement a full-color lens-array holographic optical element and conjugated reconstruction as well as 2D/3D convertible IDHOE. Studies on the improvements of viewing characteristics including a viewing angle, fill factor, and resolution are also presented. Lastly, essential issues and their possible solutions are discussed as future work.

  9. Luminous exothermic hollow optical elements for enhancement of biofilm growth and activity.

    Science.gov (United States)

    Zhong, Nianbing; Zhao, Mingfu; Zhong, Lianchao; Li, Shan; Luo, Binbin; Tang, Bin; Song, Tao; Shi, Shenghui; Hu, Xinyu; Xin, Xin; Wu, Ruohua; Cen, Yanyan; Wang, Zhengkun

    2017-03-20

    In this work, we present a luminous-exothermic hollow optical element (LEHOE) that performs spectral beam splitting in the visible spectral range for the enhancement of biofilm growth and activity. The LEHOE is composed of a four-layer structure with a fiber core (air), cladding (SiO2), coating I (LaB6 film), and coating II (SiO2-Agarose-Medium film). To clarify the physical, optical and photothermal conversion properties of the LEHOE, we determined the surface morphology and composition of the coating materials, and examined the luminous intensity and heating rate at the LEHOE surface. The biofilm activity on the biocompatible LEHOE is far greater than that of commercial fibers, and the biofilm weight on the LEHOE is 4.5 × that of the uncoated hollow optical element.

  10. Fiber optic refractometric sensors using a semi-ellipsoidal sensing element.

    Science.gov (United States)

    Castro Martinez, Amalia Nallely; Komanec, Matej; Nemecek, Tomas; Zvanovec, Stanislav; Khotiaintsev, Sergei

    2016-04-01

    We present theoretical and experimental results for a fiber optic refractometric sensor employing a semi-ellipsoidal sensing element made of polymethyl methacrylate. The double internal reflection of light inside the element provides sensitivity to the refractive index of the external analyte. We demonstrate that the developed sensor, operating at a wavelength of 632 nm, is capable of measurement within a wide range of refractive indices from n=1.00 to n=1.47 with sensitivity over 500 dB/RIU. A comparison of the developed sensor with two more complex refractometric sensors, one based on tapered optical fiber and the other based on suspended-core microstructure optical fiber, is presented.

  11. Nanoscale femtosecond imaging of transient hot solid density plasmas with elemental and charge state sensitivity using resonant coherent diffraction

    Science.gov (United States)

    Kluge, T.; Bussmann, M.; Chung, H.-K.; Gutt, C.; Huang, L. G.; Zacharias, M.; Schramm, U.; Cowan, T. E.

    2016-03-01

    Here, we propose to exploit the low energy bandwidth, small wavelength, and penetration power of ultrashort pulses from XFELs for resonant Small Angle Scattering (SAXS) on plasma structures in laser excited plasmas. Small angle scattering allows to detect nanoscale density fluctuations in forward scattering direction. Typically, the SAXS signal from laser excited plasmas is expected to be dominated by the free electron distribution. We propose that the ionic scattering signal becomes visible when the X-ray energy is in resonance with an electron transition between two bound states (resonant coherent X-ray diffraction). In this case, the scattering cross-section dramatically increases so that the signal of X-ray scattering from ions silhouettes against the free electron scattering background which allows to measure the opacity and derived quantities with high spatial and temporal resolution, being fundamentally limited only by the X-ray wavelength and timing. Deriving quantities such as ion spatial distribution, charge state distribution, and plasma temperature with such high spatial and temporal resolution will make a vast number of processes in shortpulse laser-solid interaction accessible for direct experimental observation, e.g., hole-boring and shock propagation, filamentation and instability dynamics, electron transport, heating, and ultrafast ionization dynamics.

  12. Ultra-broadband achromatic imaging with diffractive photon sieves

    Science.gov (United States)

    Zhao, Xiaonan; Hu, Jingpei; Lin, Yu; Xu, Feng; Zhu, Xiaojun; Pu, Donglin; Chen, Linsen; Wang, Chinhua

    2016-06-01

    Diffractive optical elements suffer from large chromatic aberration due to the strong wavelength-dependent nature in diffraction phenomena, and therefore, diffractive elements can work only at a single designed wavelength, which significantly limits the applications of diffractive elements in imaging. Here, we report on a demonstration of a wavefront coded broadband achromatic imaging with diffractive photon sieves. The broadband diffraction imaging is implemented with a wavefront coded pinhole pattern that generates equal focusing power for a wide range of operating wavelength in a single thin-film element without complicated auxiliary optical system. Experimental validation was performed using an UV-lithography fabricated wavefront coded photon sieves. Results show that the working bandwidth of the wavefront coded photon sieves reaches 28 nm compared with 0.32 nm of the conventional one. Further demonstration of the achromatic imaging with a bandwidth of 300 nm is also performed with a wavefront coded photon sieves integrated with a refractive element.

  13. Impedance-Tunable Transformation Optics: A New Strategy for Refctionless Design of Optical Elements

    CERN Document Server

    Cao, Jun; Yan, Shenglin; Sun, Xiaohan

    2013-01-01

    We propose a new strategy to remove the reections resulted from the finite embedded transformation-optical design by putting forward an impedance-tunable coordinate transformation,on which the functions of impedance coefficients can be derived in the original space without changing the refractive index. Based on the method, two-dimensional (2D) reectionless beam compressors, bends and splitters are designed through tuning the impedance coefficients. The numerical simulations show that the reection can be removed without inserting an antireflective coating. The impedance-tunable coordinate transformation can also be applied to other transformation-optical designs, such as cloaking, lens, antennas, etc.

  14. Ultra-fast Measurements of Optically Induced Lattice Dynamics in LuMnO3 Using Aluminum K-alpha X-Ray Diffraction.

    Science.gov (United States)

    Workman, J.; Wark, J. S.

    2005-10-01

    An experiment to study the structural dynamics at the ultra-fast time scale in optically-pumped samples is presented. Measurements of lattice dynamics in LuMnO3 are presented and compared to calculations using dynamical diffraction theory modified for hexagonal crystal structure. Ultra-fast x-ray emission is used to measure Bragg peak shifts using diffraction and compared to calculations. Results are presented for optical pump energy densities of 8 and 20-mJ/cm^2. The experiment uses ˜150 mJ of a 100fs Ti:Sapphire laser to excite K-alpha x-ray emission in an aluminum wire with ˜1-2% split off for the material pump. The x-ray emission is relayed using a spherical Quartz crystal to the sample target. Plans for experiments using Cu K-alpha emission to probe Fe samples will also be described.

  15. Femtosecond laser fabrication of sub-diffraction nanoripples on wet Al surface in multi-filamentation regime: High optical harmonics effects?

    Energy Technology Data Exchange (ETDEWEB)

    Ionin, A.A.; Kudryashov, S.I., E-mail: sikudr@lebedev.ru; Makarov, S.V.; Rudenko, A.A.; Saltuganov, P.N.; Seleznev, L.V.; Sinitsyn, D.V.; Sunchugasheva, E.S.

    2014-02-15

    Relief ripples with sub-diffraction periods (≈λ{sub las}/3, λ{sub las}/4) were produced on a aluminum surface immersed in water and irradiated in a multi-filamentation regime by focused 744 nm femtosecond laser pulses with highly supercritical, multi-GW peak powers. For the VUV (8.5 eV) surface plasmon resonance on the wet aluminum surface, such small-scale surface nanogratings can be produced by high – second and third – optical harmonics, coming to the surface from the optical filaments in the water layer. Then, the sub-diffraction surface ripples may appear through interference of their transverse electric fields with the longitudinal electric fields of their counterparts, scattered on the surface roughness and appeared as the corresponding high-energy, high-wavenumber surface polaritons.

  16. Evaluation of the current biased integrated optical processors based on bistable dode elements

    Science.gov (United States)

    Tang, C. L.; Swanson, P. D.; Parker, M. A.; Libby, S. I.

    1994-07-01

    Three optical switching elements have been designed, fabricated and tested for use in an integrated, optical signal processor. The first, and optical NOR logic gate, uses gain quenching as a means of allowing one (or more) light beam (s) to control the output light. This technique, along with the use of a two-pad bistable output laser, is used in the demonstration of the feasibility of the second device, an all optical RS flip-flop. The third device consists of a broad area orthogonal mode switch laser, whose corollary outputs correspond to the sign of the voltage difference between its two high impedance electrical inputs. This device also has possible memory applications if bistable mode switching within the broad area laser can be achieved.

  17. James Webb Space Telescope Optical Telescope Element Integrated Science Instrument Module (OTIS) Status

    Science.gov (United States)

    Feinberg, Lee; Voyton, Mark; Lander, Julie; Keski-Kuha, Ritva; Matthews, Gary

    2016-01-01

    The James Webb Space Telescope Optical Telescope Element (OTE) and Integrated ScienceInstrument Module (ISIM)are integrated together to form the OTIS. Once integrated, the OTIS undergoes primary mirrorcenter of curvatureoptical tests, electrical and operational tests, acoustics and vibration testing at the Goddard SpaceFlight Center beforebeing shipped to the Johnson Space Center for cryogenic optical testing of the OTIS. In preparationfor the cryogenicoptical testing, the JWST project has built a Pathfinder telescope and has completed two OpticalGround SystemEquipment (OGSE) cryogenic optical tests with the Pathfinder. In this paper, we will summarize opticaltest results todate and status the final Pathfinder test and the OTIS integration and environmental test preparations

  18. A novel high-contrast imaging technique based on optical tunneling to search for faint companions around bright stars at the limit of diffraction

    CERN Document Server

    Derigs, Dominik; Ghosh, Dhriti Sundar; Abel-Tibérini, Laëtitia

    2016-01-01

    We present a novel application of optical tunneling in the context of high-angular resolution, high-contrast techniques with the aim of improving direct imaging capabilities of faint companions in the vicinity of bright stars. In contrast to existing techniques like coronagraphy, we apply well-established techniques from integrated optics to exclusively extinct a very narrow angular direction coming from the sky. This extinction is achieved in the pupil plane and does not suffer from diffraction pattern residuals. We give a comprehensive presentation of the underlying theory as well as first laboratory results.

  19. Elemental and mineralogical study of earth-based pigments using particle induced X-ray emission and X-ray diffraction

    Science.gov (United States)

    Nel, P.; Lynch, P. A.; Laird, J. S.; Casey, H. M.; Goodall, L. J.; Ryan, C. G.; Sloggett, R. J.

    2010-07-01

    Artwork and precious artefacts demand non-destructive analytical methodologies for art authentication, attribution and provenance assessment. However, structural and chemical characterisation represents a challenging problem with existing analytical techniques. A recent authentication case based on an Australian Aboriginal artwork, indicate there is substantial benefit in the ability of particle induced X-ray emission (PIXE), coupled with dynamic analysis (DA) to characterise pigments through trace element analysis. However, this information alone is insufficient for characterising the mineralogical residence of trace elements. For this reason a combined methodology based on PIXE and X-ray diffraction (XRD) has been performed to explore the benefits of a more comprehensive data set. Many Aboriginal paintings and artefacts are predominantly earth pigment based. This makes these cultural heritage materials an ideal case study for testing the above combined methodological approach on earth-based pigments. Samples of synthetic and naturally occurring earth-based pigments were obtained from a range of sources, which include Indigenous communities within Australia's Kimberley region. PIXE analyses using a 3 MeV focussed proton beam at the CSIRO nuclear microprobe, as well as laboratory-based XRD was carried out on the above samples. Elemental signature spectra as well as mineralogical data were used to assess issues regarding synthetic and naturally occurring earth pigments with the ultimate aim of establishing provenance.

  20. Optical tomography reconstruction algorithm with the finite element method: An optimal approach with regularization tools

    Energy Technology Data Exchange (ETDEWEB)

    Balima, O., E-mail: ofbalima@gmail.com [Département des Sciences Appliquées, Université du Québec à Chicoutimi, 555 bd de l’Université, Chicoutimi, QC, Canada G7H 2B1 (Canada); Favennec, Y. [LTN UMR CNRS 6607 – Polytech’ Nantes – La Chantrerie, Rue Christian Pauc, BP 50609 44 306 Nantes Cedex 3 (France); Rousse, D. [Chaire de recherche industrielle en technologies de l’énergie et en efficacité énergétique (t3e), École de technologie supérieure, 201 Boul. Mgr, Bourget Lévis, QC, Canada G6V 6Z3 (Canada)

    2013-10-15

    Highlights: •New strategies to improve the accuracy of the reconstruction through mesh and finite element parameterization. •Use of gradient filtering through an alternative inner product within the adjoint method. •An integral form of the cost function is used to make the reconstruction compatible with all finite element formulations, continuous and discontinuous. •Gradient-based algorithm with the adjoint method is used for the reconstruction. -- Abstract: Optical tomography is mathematically treated as a non-linear inverse problem where the optical properties of the probed medium are recovered through the minimization of the errors between the experimental measurements and their predictions with a numerical model at the locations of the detectors. According to the ill-posed behavior of the inverse problem, some regularization tools must be performed and the Tikhonov penalization type is the most commonly used in optical tomography applications. This paper introduces an optimized approach for optical tomography reconstruction with the finite element method. An integral form of the cost function is used to take into account the surfaces of the detectors and make the reconstruction compatible with all finite element formulations, continuous and discontinuous. Through a gradient-based algorithm where the adjoint method is used to compute the gradient of the cost function, an alternative inner product is employed for preconditioning the reconstruction algorithm. Moreover, appropriate re-parameterization of the optical properties is performed. These regularization strategies are compared with the classical Tikhonov penalization one. It is shown that both the re-parameterization and the use of the Sobolev cost function gradient are efficient for solving such an ill-posed inverse problem.

  1. Optics

    CERN Document Server

    Fincham, W H A

    2013-01-01

    Optics: Eighth Edition covers the work necessary for the specialization in such subjects as ophthalmic optics, optical instruments and lens design. The text includes topics such as the propagation and behavior of light; reflection and refraction - their laws and how different media affect them; lenses - thick and thin, cylindrical and subcylindrical; photometry; dispersion and color; interference; and polarization. Also included are topics such as diffraction and holography; the limitation of beams in optical systems and its effects; and lens systems. The book is recommended for engineering st

  2. Inductively coupled plasma optical emission spectroscopy determination of trace element composition of argan oil.

    Science.gov (United States)

    Gonzálvez, A; Ghanjaoui, M E; El Rhazi, M; de la Guardia, M

    2010-02-01

    A methodology based on inductively coupled plasma optical emission spectroscopy (ICP-OES) after microwave assisted acid digestion has been developed to determine the trace element content of Moroccan argan oil. Limit of detection values equal or lower than few mg/kg were obtained for all elements under study. To assure the accuracy of the whole procedure, recovery studies were carried out on argan oil samples spiked at different concentration levels from 10 to 200 µg/L. Quantitative average recovery values were obtained for all elements evaluated, demonstrating the suitability of this methodology for the determination of trace elements in argan oil samples. Aluminum, calcium, chromium, iron, potassium, lithium, magnesium, sodium, vanadium and zinc were quantitatively determined in Moroccan argan oils being found that their concentration is different of that found in other edible oils thus offering a way for authentication and for the evaluation of possible adulterations.

  3. Arbitrarily complete Bell-state measurement using only linear optical elements

    Energy Technology Data Exchange (ETDEWEB)

    Grice, W. P. [Computational Sciences and Engineering Division, Oak Ridge National Laboratory, Tennessee (United States)

    2011-10-15

    A complete Bell-state measurement is not possible using only linear-optic elements, and most schemes achieve a success rate of no more than 50%, distinguishing, for example, two of the four Bell states but returning degenerate results for the other two. It is shown here that the introduction of a pair of ancillary entangled photons improves the success rate to 75%. More generally, the addition of 2{sup N}-2 ancillary photons yields a linear-optic Bell-state measurement with a success rate of 1-1/2{sup N}.

  4. Application of confocal technology based on polycapillary X-ray optics in three-dimensional diffraction scanning analysis

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Tianxi, E-mail: stxbeijing@163.com [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); Liu, Hehe; Liu, Zhiguo; Peng, Song [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China); Ma, Yongzhong [Center for Disease Control and Prevention of Beijing, Beijing 100013 (China); Sun, Weiyuan; Luo, Ping; Ding, Xunliang [The Key Laboratory of Beam Technology and Materials Modification of the Ministry of Education, Beijing Normal University, Beijing 100875 (China); College of Nuclear Science and Technology, Beijing Normal University, Beijing 100875 (China); Beijing Radiation Center, Beijing 100875 (China)

    2014-03-15

    The confocal technology based on a polycapillary focusing X-ray lens in the excitation channel and a polycapillary parallel X-ray lens in the detection channel was used to perform three-dimensional energy dispersive X-ray diffraction scanning analysis of a copper film on a silicon substrate. A theoretical model of correcting the intensity of the diffracted X-rays from different parts of the sample in the confocal volume was designed. The point-to-point 3D diffraction information of the sample was obtained.

  5. Polarization-induced noise in a fiber-optic Michelson interferometer with Faraday rotator mirror elements.

    Science.gov (United States)

    Ferreira, L A; Santos, J L; Farahi, F

    1995-10-01

    Faraday rotator mirror elements have been used in a number of applications as compensators for induced birefringence in retracing paths. In interferometric systems, such as the fiber-optic Michelson interferometer, this approach proved to be useful in providing maximum fringe visibility and insensitivity to the polarization state of light injected into the interferometer. However, it is found that, when the characteristics of the fiber coupler depend on the polarization state of the input beam, the efficiency of the Faraday mirror elements is limited. Theoretical analysis and experimental results in support of this statement are presented.

  6. Polarization-induced noise in a fiber-optic Michelson interferometer with Faraday rotator mirror elements

    Science.gov (United States)

    Ferreira, L. A.; Santos, J. L.; Farahi, F.

    1995-10-01

    Faraday rotator mirror elements have been used in a number of applications as compensators for induced birefringence in retracing paths. In interferometric systems, such as the fiber-optic Michelson interferometer, this approach proved to be useful in providing maximum fringe visibility and insensitivity to the polarization state of light injected into the interferometer. However, it is found that, when the characteristics of the fiber coupler depend on the polarization state of the input beam, the efficiency of the Faraday mirror elements is limited. Theoretical analysis and experimental results in support of this statement are presented.

  7. Sun-tracking optical element realized using thermally activated transparency-switching material.

    Science.gov (United States)

    Apostoleris, Harry; Stefancich, Marco; Lilliu, Samuele; Chiesa, Matteo

    2015-07-27

    We present a proof of concept demonstration of a novel optical element: a light-responsive aperture that can track a moving light beam. The element is created using a thermally-activated transparency-switching material composed of paraffin wax and polydimethylsiloxane (PDMS). Illumination of the material with a focused beam causes the formation of a localized transparency at the focal spot location, due to local heating caused by absorption of a portion of the incident light. An application is proposed in a new design for a self-tracking solar collector.

  8. Optically Controlled Reconfigurable Antenna Array Based on E-Shaped Elements

    Directory of Open Access Journals (Sweden)

    Arismar Cerqueira Sodré Junior

    2014-01-01

    Full Text Available This work presents the development of optically controlled reconfigurable antenna arrays. They are based on two patch elements with E-shaped slots, a printed probe, and a photoconductive switch made from an intrinsic silicon die. Numerical simulations and experiments have been shown to be in agreement, and both demonstrate that the frequency response of the antenna arrays can be efficiently reconfigured over two different frequency ISM bands, namely, 2.4 and 5 GHz. A measured gain of 12.5 dBi has been obtained through the use of two radiating elements printed in a low-cost substrate and a dihedral corner reflector.

  9. Beyond the diffraction limit of optical/IR interferometers. I. Angular diameter and rotation parameters of Achernar from differential phases

    Science.gov (United States)

    Domiciano de Souza, A.; Hadjara, M.; Vakili, F.; Bendjoya, P.; Millour, F.; Abe, L.; Carciofi, A. C.; Faes, D. M.; Kervella, P.; Lagarde, S.; Marconi, A.; Monin, J.-L.; Niccolini, G.; Petrov, R. G.; Weigelt, G.

    2012-09-01

    Context. Spectrally resolved long-baseline optical/IR interferometry of rotating stars opens perspectives to investigate their fundamental parameters and the physical mechanisms that govern their interior, photosphere, and circumstellar envelope structures. Aims: Based on the signatures of stellar rotation on observed interferometric wavelength-differential phases, we aim to measure angular diameters, rotation velocities, and orientation of stellar rotation axes. Methods: We used the AMBER focal instrument at ESO-VLTI in its high-spectral resolution mode to record interferometric data on the fast rotator Achernar. Differential phases centered on the hydrogen Br γ line (K band) were obtained during four almost consecutive nights with a continuous Earth-rotation synthesis during ~5 h/night, corresponding to ~60° position angle coverage per baseline. These observations were interpreted with our numerical code dedicated to long-baseline interferometry of rotating stars. Results: By fitting our model to Achernar's differential phases from AMBER, we could measure its equatorial radius Req = 11.6 ± 0.3 R⊙, equatorial rotation velocity Veq = 298 ± 9 km s-1, rotation axis inclination angle i = 101.5 ± 5.2°, and rotation axis position angle (from North to East) PArot = 34.9 ± 1.6°. From these parameters and the stellar distance, the equatorial angular diameter ⌀eq of Achernar is found to be 2.45 ± 0.09 mas, which is compatible with previous values derived from the commonly used visibility amplitude. In particular, ⌀eq and PArot measured in this work with VLTI/AMBER are compatible with the values previously obtained with VLTI/VINCI. Conclusions: The present paper, based on real data, demonstrates the super-resolution potential of differential interferometry for measuring sizes, rotation velocities, and orientation of rotating stars in cases where visibility amplitudes are unavailable and/or when the star is partially or poorly resolved. In particular, we showed

  10. Focal construct geometry for high intensity energy dispersive x-ray diffraction based on x-ray capillary optics.

    Science.gov (United States)

    Li, Fangzuo; Liu, Zhiguo; Sun, Tianxi; Jiang, Bowen; Zhu, Yu

    2016-03-14

    We presented a focal construct geometry (FCG) method for high intensity energy dispersive X-ray diffraction by utilizing a home-made ellipsoidal single-bounce capillary (ESBC) and a polycapillary parallel X-ray lens (PPXRL). The ESBC was employed to focus the X-rays from a conventional laboratory source into a small focal spot and to produce an annular X-ray beam in the far-field. Additionally, diffracted polychromatic X-rays were confocally collected by the PPXRL attached to a stationary energy-resolved detector. Our FCG method based on ESBC and PPXRL had achieved relatively high intensity diffraction peaks and effectively narrowed the diffraction peak width which was helpful in improving the potential d-spacing resolution for material phase analysis.

  11. High speed, high power one-dimensional beam steering from a 6-element optical phased array.

    Science.gov (United States)

    Huang, W Ronny; Montoya, Juan; Kansky, Jan E; Redmond, Shawn M; Turner, George W; Sanchez-Rubio, Antonio

    2012-07-30

    Beam steering at high speed and high power is demonstrated from a 6-element optical phased array using coherent beam combining (CBC) techniques. The steering speed, defined as the inverse of the time to required to sweep the beam across the steering range, is 40 MHz and the total power is 396 mW. The measured central lobe FWHM width is 565 μrad. High on-axis intensity is maintained periodically by phase-locking the array via a stochastic-parallel-gradient-descent (SPGD) algorithm. A master-oscillator-power-amplifier (MOPA) configuration is used where the amplifier array elements are semiconductor slab-coupled-optical-waveguide-amplifiers (SCOWAs). The beam steering is achieved by LiNbO(3) phase modulators; the phase-locking occurs by current adjustment of the SCOWAs. The system can be readily scaled to GHz steering speed and multiwatt-class output.

  12. Generalized ray-transfer matrix for an optical element having an arbitrary wavefront aberration.

    Science.gov (United States)

    Jeong, Tae Moon; Ko, Do-Kyeong; Lee, Jongmin

    2005-11-15

    A generalized ray-transfer matrix for describing the action of an optical element having an arbitrary wavefront aberration is obtained. In this generalized ray-transfer matrix, the action of the aberrated optical element is represented by the product of radial ray-transfer matrices and tangential ray-transfer matrices. The refraction angle of an incident ray is calculated from the gradient of the wavefront aberration at the point of incidence, and the radial and tangential ray-transfer matrices directly use the gradient as a matrix component. To show the validity of the generalized ray-transfer matrix, intercept heights from a spot diagram are calculated with the generalized ray-transfer matrix and compared with those calculated with commercial ray-tracing software.

  13. Elemental abundances of Galactic bulge planetary nebulae from optical recombination lines

    CERN Document Server

    Wang, W

    2007-01-01

    (abridged) Deep long-slit optical spectrophotometric observations are presented for 25 Galactic bulge planetary nebulae (GBPNe) and 6 Galactic disk planetary nebulae (GDPNe). The spectra, combined with archival ultraviolet spectra obtained with the International Ultraviolet Explorer (IUE) and infrared spectra obtained with the Infrared Space Observatory (ISO), have been used to carry out a detailed plasma diagnostic and element abundance analysis utilizing both collisional excited lines (CELs) and optical recombination lines (ORLs). Comparisons of plasma diagnostic and abundance analysis results obtained from CELs and from ORLs reproduce many of the patterns previously found for GDPNe. In particular we show that the large discrepancies between electron temperatures (Te's) derived from CELs and from ORLs appear to be mainly caused by abnormally low values yielded by recombination lines and/or continua. Similarly, the large discrepancies between heavy element abundances deduced from ORLs and from CELs are large...

  14. Fabrication of optical element from unidirectional grown imidazole-imidazolium picrate monohydrate (IIP) organic crystals for nonlinear optical applications

    Science.gov (United States)

    Vivek, P.; Murugakoothan, P.

    2014-12-01

    Nonlinear optical bulk single crystal of Imidazole-imidazolium picrate monohydrate (IIP) has been grown by Sankaranarayanan-Ramasamy (SR) method using acetonitrile as solvent. First time we report the bulk growth of IIP crystal by SR method. The transparent IIP single crystal of maximum diameter 21 mm and length 46 mm was obtained by employing SR method. The grown crystal was subjected to high resolution X-ray diffraction, UV-vis-NIR transmittance, refractive index, hardness, dielectric and laser damage threshold studies. The crystalline perfection of the grown crystal was analyzed using HRXRD. Cut off wavelength and optical transmission window of the crystal was assessed by UV-vis-NIR and the refractive index of the crystal was found. The mechanical property of the crystal was estimated by Vicker's hardness test. The dielectric property of the crystal was measured as a function of frequency. The laser damage threshold value was determined. The particle size dependent second harmonic generation efficiency for IIP was evaluated with standard reference material potassium dihydrogen phosphate (KDP) by Kurtz-Perry powder method using Nd:YAG laser, which established the existence of phase matching. The second harmonic generation (SHG) of IIP crystal was investigated by the SHG Maker fringes technique. The mechanism of growth is revealed by carrying out chemical etching using acetonitrile as etchant.

  15. Optical Testing and Verification Methods for the James Webb Space Telescope Integrated Science Instrument Module Element

    Science.gov (United States)

    Antonille, Scott R.; Miskey, Cherie L.; Ohl, Raymond G.; Rohrbach, Scott O.; Aronstein, David L.; Bartoszyk, Andrew E.; Bowers, Charles W.; Cofie, Emmanuel; Collins, Nicholas R.; Comber, Brian J.; hide

    2016-01-01

    NASA's James Webb Space Telescope (JWST) is a 6.6m diameter, segmented, deployable telescope for cryogenic IR space astronomy (40K). The JWST Observatory includes the Optical Telescope Element (OTE) and the Integrated Science Instrument Module (ISIM) that contains four science instruments (SI) and the fine guider. The SIs are mounted to a composite metering structure. The SI and guider units were integrated to the ISIM structure and optically tested at the NASA Goddard Space Flight Center as a suite using the Optical Telescope Element SIMulator (OSIM). OSIM is a full field, cryogenic JWST telescope simulator. SI performance, including alignment and wave front error, were evaluated using OSIM. We describe test and analysis methods for optical performance verification of the ISIM Element, with an emphasis on the processes used to plan and execute the test. The complexity of ISIM and OSIM drove us to develop a software tool for test planning that allows for configuration control of observations, associated scripts, and management of hardware and software limits and constraints, as well as tools for rapid data evaluation, and flexible re-planning in response to the unexpected. As examples of our test and analysis approach, we discuss how factors such as the ground test thermal environment are compensated in alignment. We describe how these innovative methods for test planning and execution and post-test analysis were instrumental in the verification program for the ISIM element, with enough information to allow the reader to consider these innovations and lessons learned in this successful effort in their future testing for other programs.

  16. Optical testing and verification methods for the James Webb Space Telescope Integrated Science Instrument Module element

    Science.gov (United States)

    Antonille, Scott R.; Miskey, Cherie L.; Ohl, Raymond G.; Rohrbach, Scott O.; Aronstein, David L.; Bartoszyk, Andrew E.; Bowers, Charles W.; Cofie, Emmanuel; Collins, Nicholas R.; Comber, Brian J.; Eichhorn, William L.; Glasse, Alistair C.; Gracey, Renee; Hartig, George F.; Howard, Joseph M.; Kelly, Douglas M.; Kimble, Randy A.; Kirk, Jeffrey R.; Kubalak, David A.; Landsman, Wayne B.; Lindler, Don J.; Malumuth, Eliot M.; Maszkiewicz, Michael; Rieke, Marcia J.; Rowlands, Neil; Sabatke, Derek S.; Smith, Corbett T.; Smith, J. Scott; Sullivan, Joseph F.; Telfer, Randal C.; Te Plate, Maurice; Vila, M. Begoña.; Warner, Gerry D.; Wright, David; Wright, Raymond H.; Zhou, Julia; Zielinski, Thomas P.

    2016-09-01

    NASA's James Webb Space Telescope (JWST) is a 6.5m diameter, segmented, deployable telescope for cryogenic IR space astronomy. The JWST Observatory includes the Optical Telescope Element (OTE) and the Integrated Science Instrument Module (ISIM), that contains four science instruments (SI) and the Fine Guidance Sensor (FGS). The SIs are mounted to a composite metering structure. The SIs and FGS were integrated to the ISIM structure and optically tested at NASA's Goddard Space Flight Center using the Optical Telescope Element SIMulator (OSIM). OSIM is a full-field, cryogenic JWST telescope simulator. SI performance, including alignment and wavefront error, was evaluated using OSIM. We describe test and analysis methods for optical performance verification of the ISIM Element, with an emphasis on the processes used to plan and execute the test. The complexity of ISIM and OSIM drove us to develop a software tool for test planning that allows for configuration control of observations, implementation of associated scripts, and management of hardware and software limits and constraints, as well as tools for rapid data evaluation, and flexible re-planning in response to the unexpected. As examples of our test and analysis approach, we discuss how factors such as the ground test thermal environment are compensated in alignment. We describe how these innovative methods for test planning and execution and post-test analysis were instrumental in the verification program for the ISIM element, with enough information to allow the reader to consider these innovations and lessons learned in this successful effort in their future testing for other programs.

  17. Multi-scale analysis of optic chiasmal compression by finite element modelling.

    Science.gov (United States)

    Wang, Xiaofei; Neely, Andrew J; McIlwaine, Gawn G; Lueck, Christian J

    2014-07-18

    The precise mechanism of bitemporal hemianopia (a type of partial visual field defect) is still not clear. Previous work has investigated this problem by studying the biomechanics of chiasmal compression caused by a pituitary tumour growing up from below the optic chiasm. A multi-scale analysis was performed using finite element models to examine both the macro-scale behaviour of the chiasm and the micro-scale interactions of the nerve fibres within it using representative volume elements. Possible effects of large deflection and non-linear material properties were incorporated. Strain distributions in the optic chiasm and optic nerve fibres were obtained from these models. The results of the chiasmal model agreed well with the limited experimental results available, indicating that the finite element modelling can be a useful tool for analysing chiasmal compression. Simulation results showed that the strain distribution in nasal (crossed) nerve fibres was much more nonuniform and locally higher than in temporal (uncrossed) nerve fibres. This strain difference between nasal and temporal nerve fibres may account for the phenomenon of bitemporal hemianopia.

  18. Ptychographic coherent x-ray diffractive imaging in the water window

    OpenAIRE

    Giewekemeyer, K.; Beckers, M.; Gorniak, T.; Grunze, M.; Salditt, T.; Rosenhahn, A.

    2011-01-01

    Coherent x-ray diffractive microscopy enables full reconstruction of the complex transmission function of an isolated object to diffraction-limited resolution without relying on any optical elements between the sample and detector. In combination with ptychography, also specimens of unlimited lateral extension can be imaged. Here we report on an application of ptychographic coherent diffractive imaging (PCDI) in the soft x-ray regime, more precisely in the so-called water wi...

  19. Nearly diffraction-limited X-ray focusing with variable-numerical-aperture focusing optical system based on four deformable mirrors

    Science.gov (United States)

    Matsuyama, Satoshi; Nakamori, Hiroki; Goto, Takumi; Kimura, Takashi; Khakurel, Krishna P.; Kohmura, Yoshiki; Sano, Yasuhisa; Yabashi, Makina; Ishikawa, Tetsuya; Nishino, Yoshinori; Yamauchi, Kazuto

    2016-04-01

    Unlike the electrostatic and electromagnetic lenses used in electron microscopy, most X-ray focusing optical systems have fixed optical parameters with constant numerical apertures (NAs). This lack of adaptability has significantly limited application targets. In the research described herein, we developed a variable-NA X-ray focusing system based on four deformable mirrors, two sets of Kirkpatrick-Baez-type focusing mirrors, in order to control the focusing size while keeping the position of the focus unchanged. We applied a mirror deformation procedure using optical/X-ray metrology for offline/online adjustments. We performed a focusing test at a SPring-8 beamline and confirmed that the beam size varied from 108 nm to 560 nm (165 nm to 1434 nm) in the horizontal (vertical) direction by controlling the NA while maintaining diffraction-limited conditions.

  20. Nearly diffraction-limited X-ray focusing with variable-numerical-aperture focusing optical system based on four deformable mirrors.

    Science.gov (United States)

    Matsuyama, Satoshi; Nakamori, Hiroki; Goto, Takumi; Kimura, Takashi; Khakurel, Krishna P; Kohmura, Yoshiki; Sano, Yasuhisa; Yabashi, Makina; Ishikawa, Tetsuya; Nishino, Yoshinori; Yamauchi, Kazuto

    2016-04-21

    Unlike the electrostatic and electromagnetic lenses used in electron microscopy, most X-ray focusing optical systems have fixed optical parameters with constant numerical apertures (NAs). This lack of adaptability has significantly limited application targets. In the research described herein, we developed a variable-NA X-ray focusing system based on four deformable mirrors, two sets of Kirkpatrick-Baez-type focusing mirrors, in order to control the focusing size while keeping the position of the focus unchanged. We applied a mirror deformation procedure using optical/X-ray metrology for offline/online adjustments. We performed a focusing test at a SPring-8 beamline and confirmed that the beam size varied from 108 nm to 560 nm (165 nm to 1434 nm) in the horizontal (vertical) direction by controlling the NA while maintaining diffraction-limited conditions.

  1. Diffraction by a small aperture in conical geometry: Application to metal coated tips used in near-field scanning optical microscopy

    CERN Document Server

    Drezet, A; Huant, S; 10.1103/PhysRevE.65.046611

    2010-01-01

    Light diffraction through a subwavelength aperture located at the apex of a metallic screen with conical geometry is investigated theoretically. A method based on a multipole field expansion is developed to solve Maxwell's equations analytically using boundary conditions adapted both for the conical geometry and for the finite conductivity of a real metal. The topological properties of the diffracted field are discussed in detail and compared to those of the field diffracted through a small aperture in a flat screen, i. e. the Bethe problem. The model is applied to coated, conically tapered optical fiber tips that are used in Near-Field Scanning Optical Microscopy. It is demonstrated that such tips behave over a large portion of space like a simple combination of two effective dipoles located in the apex plane (an electric dipole and a magnetic dipole parallel to the incident fields at the apex) whose exact expressions are determined. However, the large "backward" emission in the P plane - a salient experimen...

  2. Diffraction from relief gratings on a biomimetic elastomer cast

    Energy Technology Data Exchange (ETDEWEB)

    Guerrero, Raphael A., E-mail: rguerrero@admu.edu.ph [Department of Physics, Ateneo de Manila University, Loyola Heights, Quezon City (Philippines); Aranas, Erika B. [Department of Physics, Ateneo de Manila University, Loyola Heights, Quezon City (Philippines)

    2010-10-12

    Biomimetic optical elements combine the optimized designs of nature with the versatility of materials engineering. We employ a beetle carapace as the template for fabricating relief gratings on an elastomer substrate. Biological surface features are successfully replicated by a direct casting procedure. Far-field diffraction effects are discussed in terms of the Fraunhofer approximation in Fourier space.

  3. Concentrating partially entangled W-class states on nonlocal atoms using low- Q optical cavity and linear optical elements

    Science.gov (United States)

    Cao, Cong; Chen, Xi; Duan, YuWen; Fan, Ling; Zhang, Ru; Wang, TieJun; Wang, Chuan

    2016-10-01

    Entanglement plays an important role in quantum information science, especially in quantum communications. Here we present an efficient entanglement concentration protocol (ECP) for nonlocal atom systems in the partially entangled W-class states, using the single-photon input-output process regarding low- Q cavity and linear optical elements. Compared with previously published ECPs for the concentration of non-maximally entangled atomic states, our protocol is much simpler and more efficient as it employs the Faraday rotation in cavity quantum electrodynamics (QED) and the parameter-splitting method. The Faraday rotation requires the cavity with low- Q factor and weak coupling to the atom, which makes the requirement for entanglement concentration much less stringent than the previous methods, and achievable with current cavity QED techniques. The parameter-splitting method resorts to linear-optical elements only. This ECP has high efficiency and fidelity in realistic experiments, and some imperfections during the experiment can be avoided efficiently with currently available techniques.

  4. Long-term laser induced contamination tests of optical elements under vacuum at 351nm

    Science.gov (United States)

    Leinhos, Uwe; Mann, Klaus; Bayer, Armin; Dette, Jens-Oliver; Schöneck, Matthias; Endemann, Martin; Wernham, Denny; Petazzi, Federico; Tighe, Adrian; Alves, Jorge; Thibault, Dominique

    2010-11-01

    Photon-induced contamination of optical surfaces is a major obstacle for space-bound laser applications. At Laser-Laboratorium Göttingen, a setup was developed that allows monitoring transmission, reflection and fluorescence of laser-irradiated optical components under well-controlled vacuum conditions, in order to assess their possible optical degradation due to radiation-induced contaminant deposition in orbit. In cooperation with the European Space Agency ESA optical elements for the ADM-Aelolus mission were investigated. In order to perform global wind-profile observation based on Doppler-LIDAR, the satellite ADM-Aelolus will be launched in 2011 and injected into an orbit 400 km above Earth's surface. ADM-Aeolus will be the first satellite ever that is equipped with a UV-laser (emitting at a wavelength of 355 nm) and a reflector telescope. For both high-reflecting mirrors and an anti-reflective coated windows long-term irradiation tests (up to 500 million laser pulses per test run) were performed at a base pressure insulators for cabling, adhesives, etc.) were installed into the chamber, and the interaction of their degassing with the sample surfaces under laser irradiation was investigated. Optical degradation associated with contaminant adsorption was detected on the irradiated sample sites as a function of various parameters, including pulse repetition rate, view factor and coating material

  5. Fluorescence-enhanced optical spectroscopy using early arriving photons in transmission mode: a finite element approach

    Science.gov (United States)

    Piron, Vianney; L'Huillier, Jean-Pierre

    2012-06-01

    Optical imaging of turbid media is a challenging problem mainly due to the scattering process that reduces image contrast and degrades spatial resolution. The development of fluorescent probes has recently improved the noninvasive optical technique. In this paper, we are interested in the time gating fluorescence signals. The diffusion approximation is used in order to describe the light propagation of a laser pulse in a turbid media that mimics breast like biological tissue. A numerical model based on a finite element method is proposed. Fluorescence time dependent numerical simulations are performed in order to compute time-gated intensities resulting from line scans across partially absorbing and scattering slab configurations. Optical properties of embedded objects are chosen to be the same as optical properties of breast tumor. Tacking into account two hidden objects, we investigate the lateral resolution aimed by fluorescence modality, and we also compared the results to thus obtained by photon propagation. Different widths of the time gate are computed and it is demonstrated that both lateral localization of one inclusion, and resolution of two inclusions, are enhanced when the time-gate width (▵t) is decreased. The overall computations confirm that fluorescent time-gating technique is very sensitive to local variations in optical properties that are due to breast-like tumors in turbid media.

  6. Quantification of morphology of bacterial colonies using laser scatter measurements and solid element optical modeling

    Science.gov (United States)

    Leavesley, Silas; Bayraktar, Bülent; Venkatapathi, Murugesan; Hirleman, E. Dan; Bhunia, Arun K.; Robinson, J. Paul; Hassler, Richard; Smith, Linda; Rajwa, Bartek

    2007-02-01

    Traditional biological and chemical methods for pathogen identification require complicated sample preparation for reliable results. Optical scattering technology has been used for identification of bacterial cells in suspension, but with only limited success. Our published reports have demonstrated that scattered light based identification of Listeria colonies growing on solid surfaces is feasible with proper pattern recognition tools. Recently we have extended this technique to classification of other bacterial genera including, Salmonella, Bacillus, and Vibrio. Our approach may be highly applicable to early detection and classification of pathogens in food-processing industry and in healthcare. The unique scattering patterns formed by colonies of different species are created through differences in colony microstructure (on the order of wavelength used), bulk optical properties, and the macroscopic morphology. While it is difficult to model the effect on scatter-signal patterns owing to the microstructural changes, the influence of bulk optical properties and overall shape of colonies can be modeled using geometrical optics. Our latest research shows that it is possible to model the scatter pattern of bacterial colonies using solid-element optical modeling software (TracePro), and theoretically assess changes in macro structure and bulk refractive indices. This study allows predicting the theoretical limits of resolution and sensitivity of our detection and classification methods. Moreover, quantification of changes in macro morphology and bulk refractive index provides an opportunity to study the response of colonies to various reagents and antibiotics.

  7. X-ray diffraction imaging of metal–oxide epitaxial tunnel junctions made by optical lithography: use of focused and unfocused X-ray beams

    Science.gov (United States)

    Mocuta, Cristian; Barbier, Antoine; Stanescu, Stefan; Matzen, Sylvia; Moussy, Jean-Baptiste; Ziegler, Eric

    2013-01-01

    X-ray diffraction techniques are used in imaging mode in order to characterize micrometre-sized objects. The samples used as models are metal–oxide tunnel junctions made by optical lithography, with lateral sizes ranging from 150 µm down to 10 µm and various shapes: discs, squares and rectangles. Two approaches are described and compared, both using diffraction contrast: full-field imaging (topography) and raster imaging (scanning probe) using a micrometre-sized focused X-ray beam. It is shown that the full-field image gives access to macroscopic distortions (e.g. sample bending), while the local distortions, at the micrometre scale (e.g. tilts of the crystalline planes in the vicinity of the junction edges), can be accurately characterized only using focused X-ray beams. These local defects are dependent on the junction shape and larger by one order of magnitude than the macroscopic curvature of the sample. PMID:23412494

  8. Incorporation of AgI clusters into the cages of zeolites LTA and FAU observed by optical spectra and X-ray diffraction patterns

    Science.gov (United States)

    Kodaira, Tetsuya; Ikeda, Takuji; Takeo, Harutoshi

    1999-02-01

    The loading of AgI into the cages of zeolites LTA and FAU was performed by vapor-phase adsorption. The successful incorporation of AgI clusters into the cages was confirmed by optical absorption spectra and X-ray powder diffraction patterns. Large blue shifts of the absorption edges were observed in the spectra of adsorbed AgI to both zeolites, compared with the lowest excited state of AgI in the bulk. The present observation of the shift implies that a strong quantum confinement in the photoexcited state of AgI occurs, which leads to the conclusion that AgI clusters have been formed in the cages. In the X-ray powder diffraction pattern of AgI-loaded LTA, superlattice reflection peaks are observed which cannot be assigned either to the reflection of LTA or the AgI in the bulk.

  9. Tailoring non-diffractive beams from amorphous light speckles

    Science.gov (United States)

    Di Battista, D.; Ancora, D.; Leonetti, M.; Zacharakis, G.

    2016-09-01

    Bessel beams are non-diffracting light structures, which maintain their spatial features after meters of propagation and are realized with simple optical elements such as axicon lenses, spatial filters, and lasers. In this paper, we demonstrate a method for generating non diffractive Bessel-like beams through a heavily scattering system, exploiting wavefronts shaped by a spatial light modulator. With the proposed method starting from amorphous speckle patterns, it is possible to produce at user defined positions configurable and non-diffracting light distributions which can improve depth-of-field in speckled illumination microscopy.

  10. The applicability of physical optics in the millimetre and sub-millimetre spectral region. Part I: The ray tracing with diffraction on facets method

    Science.gov (United States)

    Baran, A. J.; Hesse, Evelyn; Sourdeval, Odran

    2017-03-01

    Future satellite missions, from 2022 onwards, will obtain near-global measurements of cirrus at microwave and sub-millimetre frequencies. To realise the potential of these observations, fast and accurate light-scattering methods are required to calculate scattered millimetre and sub-millimetre intensities from complex ice crystals. Here, the applicability of the ray tracing with diffraction on facets method (RTDF) in predicting the bulk scalar optical properties and phase functions of randomly oriented hexagonal ice columns and hexagonal ice aggregates at millimetre frequencies is investigated. The applicability of RTDF is shown to be acceptable down to size parameters of about 18, between the frequencies of 243 and 874 GHz. It is demonstrated that RTDF is generally well within about 10% of T-matrix solutions obtained for the scalar optical properties assuming hexagonal ice columns. Moreover, on replacing electromagnetic scalar optical property solutions obtained for the hexagonal ice aggregate with the RTDF counterparts at size parameter values of about 18 or greater, the bulk scalar optical properties can be calculated to generally well within ±5% of an electromagnetic-based database. The RTDF-derived bulk scalar optical properties result in brightness temperature errors to generally within about ±4 K at 874 GHz. Differing microphysics assumptions can easily exceed such errors. Similar findings are found for the bulk scattering phase functions. This finding is owing to the scattering solutions being dominated by the processes of diffraction and reflection, both being well described by RTDF. The impact of centimetre-sized complex ice crystals on interpreting cirrus polarisation measurements at sub-millimetre frequencies is discussed.

  11. Mathematical simulation of the optical system of a fiber-optic measuring micro motion converter with a cylindrical lens modulation element

    Science.gov (United States)

    Murashkina, T. I.; Motin, A. V.; Badeeva, E. A.

    2017-01-01

    The paper presents the results of mathematical modeling to determine the physical, structural and technological parameters of differential fiber-optic micro motion converters with a cylindrical lens, which are basic elements of the technical solutions for fiber-optic sensors of various physical quantities used in the industry in automated control systems.

  12. Stability of the micromachined membrane deformable mirror as a freeform optical element

    Science.gov (United States)

    Vdovin, Gleb; Soloviev, Oleg; Patlan, Seva

    2014-09-01

    Micromachined membrane deformable mirror (MMDM) can serve as an ad hoc" free-form optical element. To test the repeatability and stability of the standard MMDM, we have conducted the test of surface figure during multiple thermal cycling, test of figure drift at elevated temperatures, and a long-term 16-day stability test of actively formed mirror figure. The average rms error did not exceed λ =25 at λ = 633 nm, after repeated cycling from -14 to +70 C, with return to the room temperature. The existing design provides ~10° stability in the temperature range of ~10°. Optimization of the design, eliminating astigmatism, would allow one to extend the temperature range to about 30. The long-term mirror figure instability at a constant temperature reaches λ/20 rms in 16 days. The P-V error with respect to the nearest sphere changes from λ/20 in the first day, to about λ/10 in the 16-th day. The tests show that MMDM is stable enough to make a reasonable alternative to free-form optics in applications that require various optical shapes to be formed with a single element.

  13. Parametric studies of magnetic-optic imaging using finite-element models

    Science.gov (United States)

    Chao, C.; Udpa, L.; Xuan, L.; Fitzpatrick, G.; Thorne, D.; Shih, W.

    2000-05-01

    Magneto-optic imaging is a relatively new sensor application of bubble memory technology to NDI. The Magneto-Optic Imager (MOI) uses a magneto-optic (MO) sensor to produce analog images of magnetic flux leakage from surface and subsurface defects. The flux leakage is produced by eddy current induction techniques in nonferrous metals and magnetic yokes are used in ferromagnetic materials. The technique has gained acceptance in the aircraft maintenance industry for use to detect surface-breaking cracks and corrosion. Until recently, much of the MOI development has been empirical in nature since the electromagnetic processes that produce images are rather complex. The availability of finite element techniques to numerically solve Maxwell's equations, in conjunction with MOI observations, allows greater understanding of the capabilities of the instrument. In this paper, we present a systematic set of finite element calculations along with MOI measurements on specific defects to quantify the current capability of the MOI as well as its desired performance. Parametric studies including effects of liftoff and proximity of edges are also studied.—This material is based upon work supported by the Federal Aviation Administration under Contract #DTFA03-98-D-00008, Delivery Order #IA013 and performed at Iowa State University's Center for NDE as part of the Center for Aviation Systems Reliability program.

  14. Soft-x-ray magneto-optical Kerr effect and element-specific hysteresis measurement

    Energy Technology Data Exchange (ETDEWEB)

    Kortright, J.B.; Rice, M. [Lawrence Berkeley National Lab., CA (United States)

    1997-04-01

    Interest in the utilization of x-ray magneto-optical properties to provide element-specific magnetic information, combined with recent development of tunable linear polarizers for spectroscopic polarization measurement, have led the authors to the study of magneto-optical rotation (MOR) near core levels of magnetic atoms in magnetic multilayer and alloy films. Their initial observation of Faraday rotation (in transmission) demonstrated that for Fe MOR is easily measured and is larger at its L{sub 3} resonance than in the near-visible spectral regions. This work also demonstrated that the spectroscopic behavior of the MOR signal in transmission, resulting from the differential reaction of left- and right-circular components of a linearly polarized beam, is related to the magnetic circular dichroism (MCD), or differential absorption, as expected by a Kramers-Kronig transformation. Thus MCD measurements using circular polarization and MOR measurements using linear polarization can provide complementary, and in some cases equivalent, information. On beamline 6.3.2 the authors have begun to investigate soft x-ray MOR in the reflection geometry, the x-ray magneto-optic Kerr effect (XMOKE). Early measurements have demonstrated the ability to measure element-specific hysteresis loops and large rotations compared to analogous near-visible measurements. The authors are investigating the spectral dependence of the XMOKE signal, and have initiated systematic materials studies of sputter-deposited films of Fe, Fe{sub x}Cr{sub 1{minus}x} alloys, and Fe/Cr multilayers.

  15. Optical Effects Accompanying the Dynamical Bragg Diffraction in Linear 1D Photonic Crystals Based on Porous Silicon

    Directory of Open Access Journals (Sweden)

    Anton Maydykovskiy

    2014-10-01

    Full Text Available We survey our recent results on the observation and studies of the effects accompanying the dynamical Bragg diffraction in one-dimensional photonic crystals (PhC. Contrary to the kinematic Bragg diffraction, the dynamical one considers a continuous interaction between the waves travelling within a spatially-periodic structure and is the most pronounced in the so called Laue geometry, leading to a number of exciting phenomena. In the described experiments, we study the PhC based on porous silicon or porous quartz, made by the electrochemical etching of crystalline silicon with the consequent thermal annealing. Importantly, these PhC are approximately hundreds of microns thick and contain a few hundreds of periods, so that the experiments in the Laue diffraction scheme are available. We discuss the effect of the temporal splitting of femtosecond laser pulses and show that the effect is quite sensitive to the polarization and the phase of a femtosecond laser pulse. We also show the experimental realization of the Pendular effect in porous quartz PhC and demonstrate the experimental conditions for the total spatial switching of the output radiation between the transmitted and diffracted directions. All described effects are of high interest for the control over the light propagation based on PhC structures.

  16. Interative-phase method for diffractively levelling the Gauss beam intensity

    OpenAIRE

    Golub, М.; Doskolovich, L.; Kotlyar, V.; Nikolsky, I.; Soifer, V.

    1993-01-01

    The phase diffractive optical element that transforms the Gaussian collimated beam into the uniformly illuminated rectangle has been calculated. In computing the phase function we have employed an adaptive iterative algorithm which is generalization of the Gerchberg-Saxton method. The smooth phase function derived using geometrical optical methods has been used as an initial approximation.

  17. Crystallization and preliminary X-ray diffraction analysis of the Pax9 paired domain bound to a DC5 enhancer DNA element.

    Science.gov (United States)

    Narasimhan, Kamesh; Hilbig, Antonia; Udayasuryan, Barath; Jayabal, Sriram; Kolatkar, Prasanna R; Jauch, Ralf

    2014-10-01

    Pax genes belong to a family of metazoan transcription factors that are known to play a critical role in eye, ear, kidney and neural development. The mammalian Pax family of transcription factors is characterized by a ∼128-amino-acid DNA-binding paired domain that makes sequence-specific contacts with DNA. The diversity in Pax gene activities emerges from complex modes of interaction with enhancer regions and heterodimerization with multiple interaction partners. Based on in vitro optimal binding-site selection studies and enhancer identification assays, it has been suggested that Pax proteins may recognize and bind their target DNA elements with different binding modes/topologies, however this hypothesis has not yet been structurally explored. One of the most extensively studied DNA target elements of the Pax6 paired domain is the eye-lens specific DC5 (δ-crystallin) enhancer element. In order to shed light on Pax6-DC5 DNA interactions, the related paired-domain prototype Pax9 was crystallized with the minimal δ-crystallin DC5 enhancer element and preliminary X-ray diffraction analysis was attempted. A 3.0 Å resolution native data set was collected at the National Synchrotron Light Source (NSLS), Brookhaven from crystals grown in a solution consisting of 10%(w/v) PEG 20K, 20%(v/v) PEG 550 MME, 0.03 M NaNO3, 0.03 M Na2HPO4, 0.03 M NH2SO4, 0.1 M MES/imidazole pH 6.5. The data set was indexed and merged in space group C2221, with unit-cell parameters a = 75.74, b = 165.59, c = 70.14 Å, α = β = γ = 90°. The solvent content in the unit cell is consistent with the presence of one Pax9 paired domain bound to duplex DNA in the asymmetric unit.

  18. Optical imaging beyond the diffraction limit by SNEM: Effects of AFM tip modifications with thiol monolayers on imaging quality

    NARCIS (Netherlands)

    Cumurcu, Aysegul; Diaz, J.; Lindsay, I.D.; Beer, de S.; Duvigneau, J.; Schön, P.M.; Vancso, G.J.

    2015-01-01

    Tip-enhanced nanoscale optical imaging techniques such as apertureless scanning near-field optical microscopy (a-SNOM) and scanning near-field ellipsometric microscopy (SNEM) applications can suffer from a steady degradation in performance due to adhesion of atmospheric contaminants to the metal coa

  19. Small angle electron diffraction and deflection

    Directory of Open Access Journals (Sweden)

    T. Koyama

    2012-03-01

    Full Text Available Electron optical system is constructed in order to obtain small angle diffraction and Lorentz deflection of electrons at the order of down to 10-6 radian in the reciprocal space. Long-distance camera length up to 3000 m is achieved in a conventional transmission electron microscope with LaB6 thermal emission type. The diffraction pattern at 5 × 10-6 radian is presented in a carbon replica grating with 500 nm lattice spacing while the magnetic deflection pattern at 2 × 10-5 radian is exhibited in Permalloy elements. A simultaneous recording of electron diffraction and Lorentz deflection is also demonstrated in 180 degree striped magnetic domains of La0.825Sr0.175MnO3.

  20. Pancharatnam-Berry optical element sorter of full angular momentum eigenstate.

    Science.gov (United States)

    Walsh, Gary F

    2016-03-21

    We propose and numerically demonstrate a Pancharatnam-Berry optical element (PBOE) device that simultaneously sorts spin (SAM) and orbital (OAM) angular momentum. This device exploits the circular polarization selective properties of PBOEs to modulate independently the orthogonal SAM eigenstates within a geometric optical transformation that sorts OAM, enabling single measurement characterization of the full angular momentum eigenstate. This expands the available state space for OAM communication and enables characterization of the eigenmode composition of structured polarization beams. We define the two-dimensional orientation patterns of the transversely varying half-waveplate PBOEs that implement the angular momentum sorter. We show that the device discriminates the OAM and SAM eigenstates of optical beams including laser cavity modes such as Laguerre-Gaussian OAM eigenmodes, Hermite-Gaussian modes, and hybrid modes with complex structured polarization. We also demonstrate that it can determine the m parameter of higher order LGml Laguerre-Gaussian modes. The ability of this device to decode information from spatially structured optical phase has potential for applications in communication, encryption, modal characterization, and scientific measurements.

  1. Spatial and temporal thermal analysis of acousto-optic deflectors using finite element analysis model.

    Science.gov (United States)

    Jiang, Runhua; Zhou, Zhenqiao; Lv, Xiaohua; Zeng, Shaoqun; Huang, Zhifeng; Zhou, Huaichun

    2012-07-01

    Thermal effects greatly influence the optical properties of the acousto-optic deflectors (AODs). Thermal analysis plays an important role in modern AOD design. However, the lack of an effective method of analysis limits the prediction in the thermal performance. In this paper, we propose a finite element analysis model to analyze the thermal effects of a TeO(2)-based AOD. Both transducer heating and acoustic absorption are considered as thermal sources. The anisotropy of sound propagation is taken into account for determining the acoustic absorption. Based on this model, a transient thermal analysis is employed using ANSYS software. The spatial temperature distributions in the crystal and the temperature changes over time are acquired. The simulation results are validated by experimental results. The effect of heat source and heat convection on temperature distribution is discussed. This numerical model and analytical method of thermal analysis would be helpful in the thermal design and practical applications of AODs.

  2. Prediction of metallic nano-optical trapping forces by finite element-boundary integral method.

    Science.gov (United States)

    Pan, Xiao-Min; Xu, Kai-Jiang; Yang, Ming-Lin; Sheng, Xin-Qing

    2015-03-01

    The hybrid of finite element and boundary integral (FE-BI) method is employed to predict nano-optical trapping forces of arbitrarily shaped metallic nanostructures. A preconditioning strategy is proposed to improve the convergence of the iterative solution. Skeletonization is employed to speed up the design and optimization where iteration has to be repeated for each beam configuration. The radiation pressure force (RPF) is computed by vector flux of the Maxwell's stress tensor. Numerical simulations are performed to validate the developed method in analyzing the plasmonic effects as well as the optical trapping forces. It is shown that the proposed method is capable of predicting the trapping forces of complex metallic nanostructures accurately and efficiently.

  3. Point Diffraction Interferometry to Measure Local Curvatures and Caustics of Noisy Wave Fronts: Application for Determining Optical Properties of Fish Lenses

    Science.gov (United States)

    Vallmitjana, S.; Ricart, I.; Bosch, S.; Gargallo, A.; Acosta, E.

    2015-02-01

    The study of caustics is important because they contain information about the image formation properties of optical systems. In this work we use the concept of caustic as a set of focal points, and we have developed a second order approach theory to determine local slopes and curvatures of a wavefront emerging from an optical system. The method is based on the use of a point diffraction interferometer, and the analysis of the interferograms allows us to compute the focal region. Experimental results obtained with a plano-convex lens demonstrate the accuracy of the combined theoretical-experimental method here developed. Application to noisy wavefronts such as those produced by biological samples, specifically in crystalline lenses of fish eyes, are also exposed.

  4. Methodology for optimal in situ alignment and setting of bendable optics for nearly diffraction-limited focusing of soft x-rays

    Science.gov (United States)

    Merthe, Daniel J.; Yashchuk, Valeriy V.; Goldberg, Kenneth A.; Kunz, Martin; Tamura, Nobumichi; McKinney, Wayne R.; Artemiev, Nikolay A.; Celestre, Richard S.; Morrison, Gregory Y.; Anderson, Erik H.; Smith, Brian V.; Domning, Edward E.; Rekawa, Senajith B.; Padmore, Howard A.

    2013-03-01

    We demonstrate a comprehensive and broadly applicable methodology for the optimal in situ configuration of bendable soft x-ray Kirkpatrick-Baez mirrors. The mirrors used for this application are preset at the Advanced Light Source Optical Metrology Laboratory prior to beamline installation. The in situ methodology consists of a new technique for simultaneously setting the height and pitch angle of each mirror. The benders of both mirrors were then optimally tuned in order to minimize ray aberrations to a level below the diffraction-limited beam waist size of 200 nm (horizontal)×100 nm (vertical). After applying this methodology, we measured a beam waist size of 290 nm (horizontal)×130 nm (vertical) with 1 nm light using the Foucault knife-edge test. We also discuss the utility of using a grating-based lateral shearing interferometer with quantitative wavefront feedback for further improvement of bendable optics.

  5. Methodology for optimal in situ alignment and setting of bendable optics for diffraction-limited focusing of soft x-rays

    Science.gov (United States)

    Merthe, Daniel J.; Yashchuk, Valeriy V.; Goldberg, Kenneth A.; Kunz, Martin; Tamura, Nobumichi; McKinney, Wayne R.; Artemiev, Nikolay A.; Celestre, Richard S.; Morrison, Gregory Y.; Anderson, Erik; Smith, Brian V.; Domning, Edward E.; Rekawa, Senajith B.; Padmore, Howard A.

    2012-09-01

    We demonstrate a comprehensive and broadly applicable methodology for the optimal in situ configuration of bendable soft x-ray Kirkpatrick-Baez mirrors. The mirrors used for this application are preset at the ALS Optical Metrology Laboratory prior to beamline installation. The in situ methodology consists of a new technique for simultaneously setting the height and pitch angle of each mirror. The benders of both mirrors were then optimally tuned in order to minimize ray aberrations to a level below the diffraction-limited beam waist size of 200 nm (horizontal) × 100 nm (vertical). After applying this methodology, we measured a beam waist size of 290 nm (horizontal) × 130 nm (vertical) with 1 nm light using the Foucault knife-edge test. We also discuss the utility of using a grating-based lateral shearing interferometer with quantitative wavefront feedback for further improvement of bendable optics.

  6. Optical antenna gain. III - The effect of secondary element support struts on transmitter gain

    Science.gov (United States)

    Klein, B. J.; Degnan, J. J.

    1976-01-01

    The effect of a secondary-element spider support structure on optical antenna transmitter gain is analyzed. An expression describing the influence of the struts on the axial gain, in both the near and far fields, is derived as a function of the number of struts and their width. It is found that, for typical systems, the struts degrade the on-axis gain by less than 0.4 dB, and the first side-lobe level is not increased significantly. Contour plots have also been included to show the symmetry of the far-field distributions for three- and four-support members.

  7. Optical antenna gain. 3: The effect of secondary element support struts on transmitter gain.

    Science.gov (United States)

    Klein, B J; Degnan, J J

    1976-04-01

    The effect of a secondary element spider support structure on optical antenna transmitter gain is analyzed. An expression describing the influence of the struts on the axial gain, in both the near and far fields, is derived as a function of the number of struts and their width. It is found that, for typical systems, the struts degrade the on-axis gain by less than 0.4 dB, and the first side-lobe level is not increased significantly. Contour plots have also been included to show the symmetry of the far-field distributions for three and four support members.

  8. Design of extended viewing zone at autostereoscopic 3D display based on diffusing optical element

    Science.gov (United States)

    Kim, Min Chang; Hwang, Yong Seok; Hong, Suk-Pyo; Kim, Eun Soo

    2012-03-01

    In this paper, to realize a non-glasses type 3D display as next step from the current glasses-typed 3D display, it is suggested that a viewing zone is designed for the 3D display using DOE (Diffusing Optical Element). Viewing zone of proposed method is larger than that of the current parallax barrier method or lenticular method. Through proposed method, it is shown to enable the expansion and adjustment of the area of viewing zone according to viewing distance.

  9. Field enhancement analysis of an apertureless near field scanning optical microscope probe with finite element method

    Institute of Scientific and Technical Information of China (English)

    Weibin Chen; Qiwen Zhan

    2007-01-01

    Plasmonic field enhancement in a fully coated dielectric near field scanning optical microscope (NSOM)probe under radial polarization illumination is analyzed using an axially symmetric three-dimensional (3D)finite element method (FEM) model. The enhancement factor strongly depends on the illumination spot size, taper angle of the probe, and the metal film thickness. The tolerance of the alignment angle is investigated. Probe designs with different metal coatings and their enhancement performance are studied as well. The nanometric spot size at the tip apex and high field enhancement of the apertureless NSOM probe have important potential application in semiconductor metrology.

  10. Splitting of quantum information in travelling wave fields using only linear optical elements

    Energy Technology Data Exchange (ETDEWEB)

    Cardoso, W B; De Almeida, N G; Avelar, A T; Baseia, B [Instituto de Fisica, Universidade Federal de Goias, 74.001-970, Goiania-GO (Brazil)

    2011-02-28

    In this paper we present a feasible post-selection scheme to split quantum information in the realm of travelling waves with success probability of 50%. Taking advantage of this scheme we have also proposed the generation of a class of W states useful for perfect teleportation and superdense coding. The scheme employs only linear optical elements as beam splitters (BS) and phase shifters, plus two photon counters and a source of two spontaneous parametric down-conversion photons. It is shown that splitting of quantum information with high fidelity is possible, even when using inefficient detectors and photoabsorption BS.

  11. Microchip Flow Cytometer with Integrated Polymer Optical Elements for Measurement of Scattered Light

    DEFF Research Database (Denmark)

    Wang, Zhenyu; El-Ali, Jamil; Perch-Nielsen, Ivan Ryberg

    2004-01-01

    channels to form a complete microchip flow cytometer. All the optical elements, the microfluidic system, and the fiber-to-waveguide couplers were defined in one layer of polymer (SU-8, negative photoresist) by standard photolithography. With only one single mask procedure, all the fabrication and packaging...... processes can be finished in one day. Polystyrene beads were measured in the microchip flow cytometer, and three signals (forward scattering, large angle scattering and extinction) were measured simultaneously for each bead. The average intensities of the forward Scattered light and the incident light...

  12. Two-photon phase gate with linear optical elements and atom-cavity system

    Science.gov (United States)

    Kang, Yi-Hao; Xia, Yan; Lu, Pei-Min

    2016-09-01

    We propose a protocol for implementing π phase gate of two photons with linear optical elements and an atom-cavity system. The evolution of the atom-cavity system is based on the quantum Zeno dynamics. The devices in the present protocol are simple and feasible with current experimental technology. Moreover, the method we proposed here is deterministic with a high fidelity. Numerical simulation shows that the evolution in cavity is efficient and robust. Therefore, the protocol may be helpful for quantum computation field.

  13. The Open Cluster Chemical Abundances and Mapping (OCCAM) Survey: Optical Extension for Neutron Capture Elements

    Science.gov (United States)

    Melendez, Matthew; O'Connell, Julia; Frinchaboy, Peter M.; Donor, John; Cunha, Katia M. L.; Shetrone, Matthew D.; Majewski, Steven R.; Zasowski, Gail; Pinsonneault, Marc H.; Roman-Lopes, Alexandre; Stassun, Keivan G.; APOGEE Team

    2017-01-01

    The Open Cluster Chemical Abundance & Mapping (OCCAM) survey is a systematic survey of Galactic open clusters using data primarily from the SDSS-III/APOGEE-1 survey. However, neutron capture elements are very limited in the IR region covered by APOGEE. In an effort to fully study detailed Galactic chemical evolution, we are conducting a high resolution (R~60,000) spectroscopic abundance analysis of neutron capture elements for OCCAM clusters in the optical regime to complement the APOGEE results. As part of this effort, we present Ba II, La II, Ce II and Eu II results for a few open clusters without previous abundance measurements using data obtained at McDonald Observatory with the 2.1m Otto Struve telescope and Sandiford Echelle Spectrograph.This work is supported by an NSF AAG grant AST-1311835.

  14. Magneto-optical investigation of the shape anisotropy of individual micron-sized magnetic elements

    Science.gov (United States)

    Sebastian, T.; Conca, A.; Wolf, G.; Schultheiss, H.; Leven, B.; Hillebrands, B.

    2011-10-01

    In this work, the anisotropy of individual microstructured magnetic elements has been investigated. The investigated elements are of elliptical shape with different sizes and aspect ratios (AR), structured from a 5-nm-thick permalloy (Ni80 Fe20) film. For the measurements, a new magneto-optical Kerr effect (MOKE) magnetometer was used. To allow for the investigation of individual microstructured elements, a micro-focused probing laser beam (spatial resolution ≈1μm) has been combined with a self-stabilizing positioning system of high accuracy, including a rotating unit. Hysteresis loops can be taken for varying orientation of the symmetry axes of the magnetic elements relative to the applied field. For the characterization of the anisotropy, the coercive field as a function of the magnetization direction is extracted from the corresponding hysteresis loops. These results make a quantitative and systematic study of the influence of the shape anisotropy on the magnetic behavior of microstructures possible. The experimental data has been compared to an extended Stoner-Wohlfarth model.

  15. Evolution of an optical vortex dipole diffracted by a half screen%光涡旋偶极子经半屏衍射后的演化

    Institute of Scientific and Technical Information of China (English)

    高曾辉; 何德; 吕百达

    2011-01-01

    The analytical expression for the propagation of an optical vortex dipole (OVD) nested in a Gaussian beam diffracted by a half screen is derived and used to study the evolution of the diffracted OVD. It is shown that Compared with the case of the OVD evolution in free space, multi-pairs of the OVD may take place in the diffracted field, and the annihilation fashion depends on the off-axis displacement. A variety of the evolution behaviors of OVDs appear by varying the off-axis parameter, but the topological charge is conserved in the evolution process.%推导出寄居于高斯光束中的光涡旋偶极子经过半屏衍射后的解析传输公式.利用所得公式对光涡旋偶极子经半屏衍射后的演化做了详细研究.结果表明,与自由空间中光涡旋偶极子演化相比较,衍射场中会出现多对光涡旋偶极子,湮没方式与离轴量有关.随离轴参数的变化,偶极子出现不同的演化特性,但在演化过程中,拓扑电荷守恒.

  16. Simple and universal method in designs of high-efficiency diffractive optical elements for spectrum separation and beam concentration

    Science.gov (United States)

    Xu, Wen-Qi; Lin, Dong-Feng; Xu, Xin; Ye, Jia-Sheng; Wang, Xin-Ke; Feng, Sheng-Fei; Sun, Wen-Feng; Han, Peng; Zhang, Yan; Meng, Qing-Bo; Yang, Guo-Zhen

    2017-06-01

    Not Available Project supported by the National Basic Research Program of China (Grant No. 2013CBA01702), the National Natural Science Foundation of China (Grant Nos. 11474206, 91233202, 11374216, and 11404224), the Scientific Research Project of Beijing Education Commission, China (Grant No. KM201310028005), and the Scientific Research Base Development Program of the Beijing Municipal Commission of Education and the Beijing Youth Top-Notch Talent Training Plan, China (Grant No. CIT&TCD201504080).

  17. Computational optical palpation: micro-scale force mapping using finite-element methods (Conference Presentation)

    Science.gov (United States)

    Wijesinghe, Philip; Sampson, David D.; Kennedy, Brendan F.

    2016-03-01

    Accurate quantification of forces, applied to, or generated by, tissue, is key to understanding many biomechanical processes, fabricating engineered tissues, and diagnosing diseases. Many techniques have been employed to measure forces; in particular, tactile imaging - developed to spatially map palpation-mimicking forces - has shown potential in improving the diagnosis of cancer on the macro-scale. However, tactile imaging often involves the use of discrete force sensors, such as capacitive or piezoelectric sensors, whose spatial resolution is often limited to 1-2 mm. Our group has previously presented a type of tactile imaging, termed optical palpation, in which the change in thickness of a compliant layer in contact with tissue is measured using optical coherence tomography, and surface forces are extracted, with a micro-scale spatial resolution, using a one-dimensional spring model. We have also recently combined optical palpation with compression optical coherence elastography (OCE) to quantify stiffness. A main limitation of this work, however, is that a one-dimensional spring model is insufficient in describing the deformation of mechanically heterogeneous tissue with uneven boundaries, generating significant inaccuracies in measured forces. Here, we present a computational, finite-element method, which we term computational optical palpation. In this technique, by knowing the non-linear mechanical properties of the layer, and from only the axial component of displacement measured by phase-sensitive OCE, we can estimate, not only the axial forces, but the three-dimensional traction forces at the layer-tissue interface. We use a non-linear, three-dimensional model of deformation, which greatly increases the ability to accurately measure force and stiffness in complex tissues.

  18. Twenty Meter Space Telescope Based on Diffractive Fresnel Lens

    Energy Technology Data Exchange (ETDEWEB)

    Early, J; Hyde, R; Baron, R

    2003-06-26

    Diffractive lenses offer two potential advantages for very large aperture space telescopes; very loose surface-figure tolerances and physical implementation as thin, flat optical elements. In order to actually realize these advantages one must be able to build large diffractive lenses with adequate optical precision and also to compactly stow the lens for launch and then fully deploy it in space. We will discuss the recent fabrication and assembly demonstration of a 5m glass diffractive Fresnel lens at LLNL. Optical performance data from smaller full telescopes with diffractive lens and corrective optics show diffraction limited performance with broad bandwidths. A systems design for a 20m space telescope will be presented. The primary optic can be rolled to fit inside of the standard fairings of the Delta IV vehicle. This configuration has a simple deployment and requires no orbital assembly. A twenty meter visible telescope could have a significant impact in conventional astronomy with eight times the resolution of Hubble and over sixty times the light gathering capacity. If the light scattering is made acceptable, this telescope could also be used in the search for terrestrial planets.

  19. High-Density Diffraction Imaging and Non-Imaging Grating Elements for EUV and X-ray Spectroscopy Fabricated by DUV Reduction Photolithography Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Diffraction gratings are powerful tools for the spectral analysis of electromagnetic radiation. Properties of gratings are determined by available fabrication means...

  20. MODELING AND EXPERIMENTAL STUDY OF A FIBER OPTIC HYDROPHONE SENSING ELEMENT

    Directory of Open Access Journals (Sweden)

    Mikhail E. Efimov

    2014-09-01

    Full Text Available A model of the fiber-optic hydrophone sensor is suggested. Hydrophone construction comprises a malleable core made of a polymeric material with regulated elastic properties to which the optical fiber is wound. The built-in module of Comsol Multiphysics - Acoustic Solid Interaction is used in the simulation; it evaluates the impact of the acoustic field of different frequencies and amplitudes on the value of the sensor surface deformation. The proposed model gives the possibility for simulating the hydrophone in various environments; materials and dimensions of sensor are selected at the design stage to ensure the required performance: frequency response and sensitivity of fiber optic hydrophone. Correctness of the model construction was verified by results comparison of the computer simulation and experimental study in the acoustic pool. The prototype was represented as the phase interferometric fiber-optic hydrophone on the Bragg gratings. The sensing element is formed as a cylindrical core round which the optical fiber is wound. Core characteristics are: the material attenuation (damping – 0.1, Young's modulus of the core - 6 MPa, Poisson’s ratio - 0.49. The prototype was tested in the experimental pool, which design makes it possible to carry out measurements at frequencies above 3 kHz in the absence of reflections of the acoustic signal. The impact assessment of the acoustic field is carried out by means of an approved piezoelectric hydrophone: the amplitude of the acoustic field of a plane wave is 0.5 and 1 Pa, frequencies of the acoustic impact are 3000 - 8000 Hz. According to the findings fabricated prototype sensitivity was equal to 0.1 rad / Pa at the frequency of 3 kHz. Studies have shown that the sensitivity of the simulated fiber optic hydrophone will decrease with increasing frequency of hydroacoustic exposure. At 8 kHz frequency the sensitivity is decreased to 0.01 rad / Pa. Prototype testing results have confirmed the adequacy

  1. Double-crystal monochromator as the first optical element in BESSRC-CAT beamlines (abstract)

    Science.gov (United States)

    Beno, Mark A.; Ramanathan, Mohan

    1996-09-01

    The first optical element in the BESSRC-CAT beamlines at the Advanced Photon Source will be a monochromator, so that a standard design for this critical component is advantageous. The monochromator we have designed is a double-crystal, fixed-exit scheme with a constant offset designed for UHV operation, thereby allowing windowless operation of the beamlines. The crystals are mounted on a turntable with the first crystal at the center of rotation. A mechanical linkage is used to correctly position the second crystal and maintain a constant offset. The main drive for the rotary motion is provided by a vacuum-compatible Huber goniometer isolated from the main vacuum chamber. Rotary motion of the primary monochromator stage is accomplished by using two adjacent vacuum chambers connected only by the small annular opening around a hollow stainless steel shaft, which connects the Huber goniometer to the turntable on which the crystals are mounted. The design of the monochromator is such that it can accommodate both water and liquid nitrogen cooling for the crystal optics. The basic design for the monochromator linkage mechanism will be presented along with details of the monochromator chamber. The results of initial optical tests of the monochromator system using tilt sensors and a precision autocollimator will also be given.

  2. Extended volume and surface scatterometer for optical characterization of 3D-printed elements

    Science.gov (United States)

    Dannenberg, Florian; Uebeler, Denise; Weiß, Jürgen; Pescoller, Lukas; Weyer, Cornelia; Hahlweg, Cornelius

    2015-09-01

    The use of 3d printing technology seems to be a promising way for low cost prototyping, not only of mechanical, but also of optical components or systems. It is especially useful in applications where customized equipment repeatedly is subject to immediate destruction, as in experimental detonics and the like. Due to the nature of the 3D-printing process, there is a certain inner texture and therefore inhomogeneous optical behaviour to be taken into account, which also indicates mechanical anisotropy. Recent investigations are dedicated to quantification of optical properties of such printed bodies and derivation of corresponding optimization strategies for the printing process. Beside mounting, alignment and illumination means, also refractive and reflective elements are subject to investigation. The proposed measurement methods are based on an imaging nearfield scatterometer for combined volume and surface scatter measurements as proposed in previous papers. In continuation of last year's paper on the use of near field imaging, which basically is a reflective shadowgraph method, for characterization of glossy surfaces like printed matter or laminated material, further developments are discussed. The device has been extended for observation of photoelasticity effects and therefore homogeneity of polarization behaviour. A refined experimental set-up is introduced. Variation of plane of focus and incident angle are used for separation of various the images of the layers of the surface under test, cross and parallel polarization techniques are applied. Practical examples from current research studies are included.

  3. 3D micro-optical elements for generation of tightly focused vortex beams

    Directory of Open Access Journals (Sweden)

    Balčytis Armandas

    2015-01-01

    Full Text Available Orbital angular momentum carrying light beams are usedfor optical trapping and manipulation. This emerging trend provides new challenges involving device miniaturization for improved performance and enhanced functionality at the microscale. Here we discus a new fabrication method based on combining the additive 3D structuring capability laser photopolymerization and the substractive sub-wavelength resolution patterning of focused ion beam lithography to produce micro-optical elements capable of compound functionality. As a case in point of this approach binary spiral zone pattern based high numerical aperture micro-lenses capable of generating topological charge carrying tightly focused vortex beams in a single wavefront transformation step are presented. The devices were modelled using finite-difference time-domain simulations, and the theoretical predictions were verified by optically characterizing the propagation properties of light transmitted through the fabricated structures. The resulting devices had focal lengths close to the predicted values of f = 18 µm and f = 13 µm as well as topological charge ℓ dependent vortex focal spot sizes of ~ 1:3 µm and ~ 2:0 µm for ℓ = 1 and ℓ = 2 respectively.

  4. Network- and network-element-level parameters for configuration, fault, and performance management of optical networks

    Science.gov (United States)

    Drion, Christophe; Berthelon, Luc; Chambon, Olivier; Eilenberger, Gert; Peden, Francoise R.; Jourdan, Amaury

    1998-10-01

    With the high interest of network operators and manufacturers for wavelength division multiplexing (WDM) networking technology, the need for management systems adapted to this new technology keeps increasing. We investigated this topic and produced outputs through the specification of the functional architecture, network layered model, and through the development of new, TMN- based, information models for the management of optical networks and network elements. Based on these first outputs, defects in each layer together with parameters for performance management/monitoring have been identified for each type of optical network element, and each atomic function describing the element, including functions for both the transport of payload signals and of overhead information. The list of probable causes has been established for the identified defects. A second aspect consists in the definition of network-level parameters, if such photonic technology-related parameters are to be considered at this level. It is our conviction that some parameters can be taken into account at the network level for performance management, based on physical measurements within the network. Some parameters could possibly be used as criteria for configuration management, in the route calculation processes, including protection. The outputs of these specification activities are taken into account in the development of a manageable WDM network prototype which will be used as a test platform to demonstrate configuration, fault, protection and performance management in a real network, in the scope of the ACTS-MEPHISTO project. This network prototype will also be used in a larger size experiment in the context of the ACTS-PELICAN field trial (Pan-European Lightwave Core and Access Network).

  5. Demonstrations of Wave Optics (Interference and Diffraction of Light) for Large Audiences Using a Laser and a Multimedia Projector

    Science.gov (United States)

    Ivanov, Dragia; Nikolov, Stefan

    2011-01-01

    This article presents a new technique for performing most well-known demonstrations of wave optics. Demonstrations which are normally very hard to show to more than a few people can be presented easily to very large audiences with excellent visibility for everyone. The proposed setup is easy to put together and use and can be very useful for…

  6. Optical imaging beyond the diffraction limit by SNEM: Effects of AFM tip modifications with thiol monolayers on imaging quality

    Energy Technology Data Exchange (ETDEWEB)

    Cumurcu, Aysegul [Materials Science and Technology of Polymers, MESA+ Institute for Nanotechnology, University of Twente, Enschede NL-7500 (Netherlands); Dutch Polymer Institute (DPI), P.O. Box 902, 5600 AX, Eindhoven (Netherlands); Diaz, Jordi [Scientific and Technological Centers of the University of Barcelona, C/ Lluís Solé i Sabaris, 1-3, 08028 Barcelona (Spain); Lindsay, Ian D. [Nanophysics and Soft Matter Group, H.H. Wills Physics Laboratory, University of Bristol, Tyndall Avenue, Bristol BS8 1TL (United Kingdom); Beer, Sissi de; Duvigneau, Joost [Materials Science and Technology of Polymers, MESA+ Institute for Nanotechnology, University of Twente, Enschede NL-7500 (Netherlands); Schön, Peter [Materials Science and Technology of Polymers, MESA+ Institute for Nanotechnology, University of Twente, Enschede NL-7500 (Netherlands); NanoBioInterface, Research Center Design and Technology, Saxion University of Applied Sciences, 7500 KB Enschede (Netherlands); Julius Vancso, G., E-mail: g.j.vancso@utwente.nl [Materials Science and Technology of Polymers, MESA+ Institute for Nanotechnology, University of Twente, Enschede NL-7500 (Netherlands)

    2015-03-15

    Tip-enhanced nanoscale optical imaging techniques such as apertureless scanning near-field optical microscopy (a-SNOM) and scanning near-field ellipsometric microscopy (SNEM) applications can suffer from a steady degradation in performance due to adhesion of atmospheric contaminants to the metal coated tip. Here, we demonstrate that a self-assembled monolayer (SAM) of ethanethiol (EtSH) is an effective means of protecting gold-coated atomic force microscopy (AFM) probe tips from accumulation of surface contaminants during prolonged exposure to ambient air. The period over which they yield consistent and reproducible results for scanning near-field ellipsometric microscopy (SNEM) imaging is thus extended. SNEM optical images of a microphase separated polystyrene-block-poly (methylmethacrylate) (PS-b-PMMA) diblock copolymer film, which were captured with bare and SAM-protected gold-coated AFM probes, both immediately after coating and following five days of storage in ambient air, were compared. During this period the intensity of the optical signals from the untreated gold tip fell by 66%, while those from the SAM protected tip fell by 14%. Additionally, gold coated AFM probe tips were modified with various lengths of alkanethiols to measure the change in intensity variation in the optical images with SAM layer thickness. The experimental results were compared to point dipole model calculations. While a SAM of 1-dodecanethiol (DoSH) was found to strongly suppress field enhancement we find that it can be locally removed from the tip apex by deforming the molecules under load, restoring SNEM image contrast. - Highlights: • SAM of ethanethiol is used to prevent contamination of gold coated tips. • Functionalizing gold coated tips with a SAM lead to reproducible SNEM imaging. • Point dipole model agreed with the experimental results of the SNEM images. • SAM of 1-dodecanethiol was found to strongly suppress field enhancement in SNEM. • SAM of 1-dodecanethiol

  7. Optical imaging beyond the diffraction limit by SNEM: effects of AFM tip modifications with thiol monolayers on imaging quality.

    Science.gov (United States)

    Cumurcu, Aysegul; Diaz, Jordi; Lindsay, Ian D; de Beer, Sissi; Duvigneau, Joost; Schön, Peter; Vancso, G Julius

    2015-03-01

    Tip-enhanced nanoscale optical imaging techniques such as apertureless scanning near-field optical microscopy (a-SNOM) and scanning near-field ellipsometric microscopy (SNEM) applications can suffer from a steady degradation in performance due to adhesion of atmospheric contaminants to the metal coated tip. Here, we demonstrate that a self-assembled monolayer (SAM) of ethanethiol (EtSH) is an effective means of protecting gold-coated atomic force microscopy (AFM) probe tips from accumulation of surface contaminants during prolonged exposure to ambient air. The period over which they yield consistent and reproducible results for scanning near-field ellipsometric microscopy (SNEM) imaging is thus extended. SNEM optical images of a microphase separated polystyrene-block-poly (methylmethacrylate) (PS-b-PMMA) diblock copolymer film, which were captured with bare and SAM-protected gold-coated AFM probes, both immediately after coating and following five days of storage in ambient air, were compared. During this period the intensity of the optical signals from the untreated gold tip fell by 66%, while those from the SAM protected tip fell by 14%. Additionally, gold coated AFM probe tips were modified with various lengths of alkanethiols to measure the change in intensity variation in the optical images with SAM layer thickness. The experimental results were compared to point dipole model calculations. While a SAM of 1-dodecanethiol (DoSH) was found to strongly suppress field enhancement we find that it can be locally removed from the tip apex by deforming the molecules under load, restoring SNEM image contrast.

  8. Optical multiple-image encryption in diffractive-imaging-based scheme using spectral fusion and nonlinear operation.

    Science.gov (United States)

    Qin, Yi; Gong, Qiong; Wang, Zhipeng; Wang, Hongjuan

    2016-11-14

    We report a new method for multiple-image encryption in diffractive-imaging-based encryption (DIBE) scheme. The discrete cosine transformation (DCT) spectra of the primary images are extracted, compacted and then nonlinear-transformed before being sent to the DIBE, where they are encoded into a single intensity pattern. With the help of a suggested phase retrieval algorithm, the original images can be recovered with high quality. Furthermore, due to the introduction of the nonlinear operation, the proposal is demonstrated to be robust to the currently available cryptographic attacks. The proposal probes a new way for multiple-image encryption in DIBE, and its effectiveness and feasibility have been supported by numerical simulations.

  9. Design of LCPG-type polarization-independent shutter with diffractive efficiency and high contrast at wavelength 532 nm

    Science.gov (United States)

    Kavosh Tehrani, Masoud; Sajad Mousavi Fard, Sayed

    2017-02-01

    We have designed liquid crystal (LC) shutter of LCPG type with high diffractive efficiency and transmission rate of more than 99.747% for modulation of non-polar light with wavelength 532 nm and high contrast in this article. Compared to other similar cases, the advantages of this design include maximization of transmission percent of diffractive element (particularly first-order diffraction) and minimization of light leakage rate caused by zero-order, and other unwanted diffractive orders. The conditions have been prepared for using diffractive elements (gratings) with shorter periods and acquisition of diffraction orders with greater diffraction angles by benefitting from suitable compounds of LC in the given design. Similarly, required measures have been taken for the deletion of adverse effects caused by reflection from optic surfaces so that very appropriate status is prepared for the function of LCPG shutter.

  10. Structural, elemental, optical and magnetic study of Fe doped ZnO and impurity phase formation

    Institute of Scientific and Technical Information of China (English)

    S.Karamat; R.S. Rawat; P. Lee; T.L. Tan; R.V. Ramanujan

    2014-01-01

    We have prepared a series of (ZnO)1-x(Fe2O3)x r 0.10 bulk samples with various concentrations of Fe dopant by ball milling and investigated their structural, compositional, optical and magnetic properties by means of X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectrometer and vibrating sample magnetometer (VSM), respectively. Information about different impurity phases was obtained through Rietveld refinements of XRD data analysis. XPS results showed different valence states (Fe2 þ and Fe3 þ ) supported by shaking satellite peaks in samples. With increasing Fe doping percentage, the crystal quality deteriorated and a shift of E2 low band (characteristic of ZnO) has been observed in Raman spectra. Energy band gap estimated from reflectance UV–vis spectroscopy showed shift for all bulk samples. The magnetic behavior was examined using a vibrating sample magnetometer (VSM), indicating ferromagnetic behavior at room temperature (300 K). The effective magnetic moment per Fe atom decreases with increase in doping percentage which indicates that ferromagnetic behavior arises from the substitution of Fe ions in the ZnO lattice.

  11. Effect of transition metal elements on the structural and optical properties of ZnO nanoparticles

    Indian Academy of Sciences (India)

    I KAZEMINEZHAD; S SAADATMAND; RAMIN YOUSEFI

    2016-06-01

    Undoped and transition metal (TM)-doped ZnO nanoparticles (Zn$_{0.98}$X$_{0.02}$O-NPs, X= Mn, Cr, Co and Fe) were synthesized from a metal nitrate precursor and gelatin by a sol–gel method. The compounds were synthesized at calcination temperatures of 550$^{\\circ}$C for 6 h. The synthesized undoped/doped ZnO-NPs were characterized by X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM). XRD results indicated that the sample products were crystalline with a hexagonal wurtzite phase. SEM images showed the ZnO-NPs nearly spherical shapes and a non-uniform shape for doped ZnO-NPs. The crystalline development in the ZnO-NPs was investigated by X-ray peak broadening. The size–strain plot (SSP) method was used to study the individual contributions of crystallite sizes and lattice strain of the undoped and doped ZnO-NPs. The obtained results showed that strain ofthe NPs plays an important role in peak broadening; moreover, the mean crystalline size of the undoped and doped ZnO-NPs estimated from the SEM and the SSP method was highly inter-correlated. Finally, optical properties ofthe samples were studied by a UV–Vis spectrometer.

  12. Undergraduate Experiment with Fractal Diffraction Gratings

    Science.gov (United States)

    Monsoriu, Juan A.; Furlan, Walter D.; Pons, Amparo; Barreiro, Juan C.; Gimenez, Marcos H.

    2011-01-01

    We present a simple diffraction experiment with fractal gratings based on the triadic Cantor set. Diffraction by fractals is proposed as a motivating strategy for students of optics in the potential applications of optical processing. Fraunhofer diffraction patterns are obtained using standard equipment present in most undergraduate physics…

  13. Precision enhancement in boundary element methods with application to electron optics.

    Science.gov (United States)

    Loyd, Jody S; Gregory, Don A

    2016-08-01

    A hybrid approach is presented for obtaining electric potentials for use in electron optics modeling. An initial solution from the boundary element method (BEM) is used to derive the bounding potential of a cylindrical subdomain subsequently used in a Fourier series solution. The approach combines the inherent precision of this analytic solution with the flexibility of BEM to describe practical, non-idealized systems of electrodes. The resulting lens field in the Fourier series subdomain is of higher precision, thereby allowing smaller errors in subsequent calculations of electron ray paths. The effects of aberrations are thus easier to observe in tracing non-paraxial rays. Example ray-traces through a simple, known einzel lens are given as validation of this approach.

  14. A 45-element continuous facesheet surface micromachined deformable mirror for optical aberration correction

    Directory of Open Access Journals (Sweden)

    Weimin Wang

    2014-02-01

    Full Text Available A 45-element continuous facesheet surface micromachined deformable mirror (DM is presented and is fabricated using the PolyMUMPs multi-user micro-electro-mechanical system processes. The effects of the structural parameters on the characteristics of the DM, such as its stroke, frequency and actuator coupling, are analyzed. In addition, the DM design has also been verified through experimental testing. This DM prototype has a surface figure of 0.5 μm and a fill factor of 95%. The DM can provide a 0.6 μm stroke with 5.9% actuator coupling. A static aberration correction based on this DM is also demonstrated, which acts as a reference for the potential adaptive optics (AO applications of the device.

  15. Trace elemental composition of curry by inductively coupled plasma optical emission spectrometry (ICP-OES).

    Science.gov (United States)

    Gonzálvez, A; Armenta, S; De La Guardia, M

    2008-01-01

    A methodology based on inductively coupled plasma optical emission spectrometry (ICP-OES) after microwave-assisted acid digestion was developed to determine the content of traces elements in curry samples from the Spanish market. The methodology was validated in terms of accuracy by the analysis of citrus and tomato leaf reference materials achieving comparable results with the certified values. The trace metal content of curry samples was compared with data available from previously published reports concerning Indian samples, especially in terms of heavy metal composition, in order to guarantee the quality of the commercially available spices in the European countries. Values found for the analysis of arsenic, lead and cadmium were significantly lower than the maximum limit allowed by European Union statutory limits for heavy metals and lower than those obtained for Indian curry leaves reported by Indian research teams by using neutron activation and γ-ray analysis.

  16. Liquid crystal devices especially for use in liquid crystal point diffraction interferometer systems

    Science.gov (United States)

    Marshall, Kenneth L [Rochester, NY

    2009-02-17

    Liquid crystal point diffraction interferometer (LCPDI) systems that can provide real-time, phase-shifting interferograms that are useful in the characterization of static optical properties (wavefront aberrations, lensing, or wedge) in optical elements or dynamic, time-resolved events (temperature fluctuations and gradients, motion) in physical systems use improved LCPDI cells that employ a "structured" substrate or substrates in which the structural features are produced by thin film deposition or photo resist processing to provide a diffractive element that is an integral part of the cell substrate(s). The LC material used in the device may be doped with a "contrast-compensated" mixture of positive and negative dichroic dyes.

  17. Room temperature neutron diffraction, optical and magnetic properties of Co(Cr1-xMnx)2O4 (x =0.0 and 0.30)

    Science.gov (United States)

    Kumar, Ram; Padam, R.; Rayaprol, S.; Siruguri, V.; Pal, D.

    2017-05-01

    We report here the effect of 30% Mn substitution on structure and magnetic properties of multiferroic CoCr2O4. Room temperature neutron diffraction studies were carried out on polycrystalline Co(Cr1-xMnx)2O4 (x=0.00 and 0.30) samples to determine structural properties. It has been observed that 30% Mn substitution for Cr in CoCr2O4 leads to increase in the ferrimagnetic transition temperature, (Tc) from ˜96 K to ˜114 K along with the magneto-structural transition temperature, (Ts) from ˜26 K to ˜32 K. In addition, optical properties were studied by UV-visible technique in the range of 200-800 nm. The energy band gap is found to decrease in compare to parent compound. Both magnetization and band gap variation can be explained using the spin-exchange interactions present in these systems.

  18. A tactile sensing element based on a hetero-core optical fiber for force measurement and texture detection

    Science.gov (United States)

    Yamazaki, Hiroshi; Koyama, Yuya; Watanabe, Kazuhiro

    2014-05-01

    Tactile sensing technology can measure a given property of an object through physical contact between a sensing element and the object. Various tactile sensing techniques have been developed for several applications such as intelligent robots, tactile interface, medical support and nursing care support. A desirable tactile sensing element for supporting human daily life can be embedded in the soft material with high sensitivity and accuracy in order to prevent from damaging to human or object physically. This report describes a new tactile sensing element. Hetero-core optical fibers have high sensitivity of macro-bending at local sensor portion and temperature independency, including advantages of optical fiber itself; thin size, light weight, flexible transmission line, and immunity to electro-magnetic interference. The proposed tactile sensing element could detect textures of touched objects through the optical loss caused by the force applied to the sensing element. The characteristics of the sensing element have been evaluated, in which the sensing element has the monotonic and non-linear sensitivity against the normal force ranged from 0 to 5 N with lower accuracy than 0.25 dB. Additionally, texture detection have been successfully demonstrated in which small surface figures of 0.1 mm in height were detected with spatial resolution of 0.4 mm.

  19. Diffractive X-Ray Telescopes

    Science.gov (United States)

    Skinner, Gerald K.

    2010-01-01

    Diffractive X-ray telescopes, using zone plates, phase Fresnel lenses, or related optical elements have the potential to provide astronomers with true imaging capability with resolution many orders of magnitude better than available in any other waveband. Lenses that would be relatively easy to fabricate could have an angular resolution of the order of micro-arc-seconds or even better, that would allow, for example, imaging of the distorted spacetime in the immediate vicinity of the super-massive black holes in the center of active galaxies. What then is precluding their immediate adoption? Extremely long focal lengths, very limited bandwidth, and difficulty stabilizing the image are the main problems. The history, and status of the development of such lenses is reviewed here and the prospects for managing the challenges that they present are discussed.

  20. Diffractive X-ray Telescopes

    CERN Document Server

    Skinner, Gerald K

    2010-01-01

    Diffractive X-ray telescopes using zone plates, phase Fresnel lenses, or related optical elements have the potential to provide astronomers with true imaging capability with resolution several orders of magnitude better than available in any other waveband. Lenses that would be relatively easy to fabricate could have an angular resolution of the order of micro-arc-seconds or even better, that would allow, for example, imaging of the distorted space- time in the immediate vicinity of the super-massive black holes in the center of active galaxies What then is precluding their immediate adoption? Extremely long focal lengths, very limited bandwidth, and difficulty stabilizing the image are the main problems. The history, and status of the development of such lenses is reviewed here and the prospects for managing the challenges that they present are discussed.

  1. Optical and structural properties in type-II InAlAs/AlGaAs quantum dots observed by photoluminescence, X-ray diffraction and transmission electron microscopy

    Science.gov (United States)

    Ben Daly, A.; Craciun, D.; Laura Ursu, E.; Lemaître, A.; Maaref, M. A.; Iacomi, F.; Vasile, B. S.; Craciun, V.

    2017-10-01

    We present the effects of AlGaAs alloy composition on InAlAs quantum dots (QDs) optical and structural properties. Photoluminescence (PL) analysis of samples having a variety of aluminium composition values covering type-II transitions clearly in QDs showed the presence of two transitions X-Sh and X-Ph. High-resolution X-ray diffraction (HRXRD) investigations showed that the layers grew epitaxially on the GaAs substrate, with no relaxation regardless the Al content of AlGaAs layer. From the reciprocal space map (RSM) investigation around (004) and (115) diffraction peaks, it was shown that the InAlAs layer is fully strained, the in-plane lattice parameters (a and b, a = b) being identical to those of GaAs substrate, while the c lattice parameter was dependent on the In and Al concentrations, being larger than that of the substrate. High-resolution transmission electronic microscopy (HRTEM) investigations confirmed that films grew epitaxially on the GaAs substrate with no visible dislocations or other major defects within the InAlAs/GaAlAs QDs structure.

  2. Piezoelectric deformable mirror for intra-cavity laser adaptive optics.

    CSIR Research Space (South Africa)

    Long, CS

    2008-03-01

    Full Text Available This paper describes the development of a deformable mirror to be used in conjunction with diffractive optical elements inside a laser cavity. A prototype piezoelectric unimorph adaptive mirror was developed to correct for time dependent phase...

  3. Design and performance of coded aperture optical elements for the CESR-TA x-ray beam size monitor

    Science.gov (United States)

    Alexander, J. P.; Chatterjee, A.; Conolly, C.; Edwards, E.; Ehrlichman, M. P.; Flanagan, J. W.; Fontes, E.; Heltsley, B. K.; Lyndaker, A.; Peterson, D. P.; Rider, N. T.; Rubin, D. L.; Seeley, R.; Shanks, J.

    2014-12-01

    We describe the design and performance of optical elements for an x-ray beam size monitor (xBSM), a device measuring e+ and e- beam sizes in the CESR-TA storage ring. The device can measure vertical beam sizes of 10 - 100 μm on a turn-by-turn, bunch-by-bunch basis at e± beam energies of ~ 2 - 5 GeV. x-rays produced by a hard-bend magnet pass through a single- or multiple-slit (coded aperture) optical element onto a detector. The coded aperture slit pattern and thickness of masking material forming that pattern can both be tuned for optimal resolving power. We describe several such optical elements and show how well predictions of simple models track measured performances.

  4. Design and performance of coded aperture optical elements for the CESR-TA x-ray beam size monitor

    CERN Document Server

    Alexander, J P; Conolly, C; Edwards, E; Ehrlichman, M P; Flanagan, J W; Fontes, E; Heltsley, B K; Lyndaker, A; Peterson, D P; Rider, N T; Rubin, D L; Seeley, R; Shanks, J

    2014-01-01

    We describe the design and performance of optical elements for an x-ray beam size monitor (xBSM), a device measuring $e^+$ and $e^-$ beam sizes in the CESR-TA storage ring. The device can measure vertical beam sizes of $10-100~\\mu$m on a turn-by-turn, bunch-by-bunch basis at $e^\\pm$ beam energies of $\\sim2-5~$GeV. X-rays produced by a hard-bend magnet pass through a single- or multiple-slit (coded aperture) optical element onto a detector. The coded aperture slit pattern and thickness of masking material forming that pattern can both be tuned for optimal resolving power. We describe several such optical elements and show how well predictions of simple models track measured performances.

  5. A mid-infrared Mueller ellipsometer with pseudo-achromatic optical elements

    CERN Document Server

    Garcia-Caurel, E; Ndong, G; Al-Bugami, B; Bernon, C; Al-Qahtani, E; Rengnez, F; De Martino, A

    2015-01-01

    The purpose of this article is to present a new broadband Mueller ellipsometer designed to work in the mid-infrared range, from 3 to 14 microns. The Mueller ellipsometer, which can be mounted in reflection or in transmission configuration, consists of a polarization state generator (PSG), a sample holder, and a polarization state analyzer (PSA). The PSG consists in one linear polarizer and a retarder sequentially rotated to generate a set of four optimal polarization states. The retarder consists in a bi-prism made of two identical Fresnel rhombs disposed symmetrically and joined by optical contact, giving the ensemble a "V" shape. Retardation is induced by the four total internal reflections that the beam undergoes when it propagates through the bi-prism. Total internal reflection allows to generate a quasi-achromatic retardation. The PSA is identical to the PSG, but with its optical elements mounted in reverse order. After a measurement run, the instrument yields a set of sixteen independent values, which i...

  6. A novel method about online monitoring surface shape of optical elements in continuous polishing

    Science.gov (United States)

    Yin, Jin; Zhu, Jianqiang; Jiao, Xiang; Wu, Yongzhong

    2016-10-01

    In conventional continuous polishing process, the surface shape of work-piece was measured by an optical plane template after being placed in such environment with constant temperature for 1 to 2 hours. During this period, uncertain influence may occur on the polishing pad due to the change of system state. Meanwhile, the regular off-line testing may cause re-processing. In this paper, a new method about on-line monitoring surface shape of optical elements is proposed by the theory of run sphere, and the change in curvature radius of the work-piece which lead to its radial tilt angle change. The change in work-piece surface shape indirectly obtain by the correction plate small angle with respect to the horizontal, and the angle were detected on line by the high-precision goniometer with the resolution 0.04 ''. According to theoretical calculations, the diameter of 200mm precision work-piece PV value up to 0.02λ (λ = 632.8nm). The fused quartz glass was measured by above method. The test results showed that the surface accuracy and processing efficiency were significantly promoted, and also improving the controllability of surface shape of work-piece based on this method.

  7. Biogenic Aerosols Over the Amazon Basin: Optical Properties and Relationship With Elemental and Ionic Composition

    Science.gov (United States)

    Artaxo, P.; Martin, S. T.; Andreae, M. O.; Godoy, J. M.; Godoy, M. L.; Rizzo, L. V.; Paixao, M.

    2008-12-01

    We investigated the optical properties of natural biogenic aerosol particles over the central Amazon Basin near Manaus during the wet season in February and March 2008. The measurements were conducted as part of the AMAZE-08 (Amazonian Aerosol Characterization Experiment) sampling campaign. Light absorption was determined with the use of an Aethalometer and an MAAP (Multi Angle Absorption Photometer). Light scattering was measured with a 3 wavelength TSI nephelometer and an Ecotech nephelometer. The elemental composition was measured trough PIXE and IC. Single scattering albedo shows relatively low values varying from 0.86 to 0.95. Very low fine mode aerosol mass was measured, and coarse mode particles are responsible for a significant fraction of scattering and absorption. Sulfur was observed in very low concentrations, and most of the aerosol mass was organic. Long range transport of soil dust from Sahara were observed and reflected in the light scattering coefficient. Wavelength dependence of absorption indicates the strong influence of coarse mode aerosol. Aerosol optical thickness shows low values, but with significant single scattering albedo values, showing strong absorption properties of these biogenic aerosols. Size distribution measurements shows consistence with the scattering coefficients measured, if the coarse mode particles are taken into account.

  8. Vector Finite Element Modeling of the Full-Wave Maxwell Equations to Evaluate Power Loss in Bent Optical Fibers

    Energy Technology Data Exchange (ETDEWEB)

    Koning, J; Rieben, R; Rodrigue, G

    2004-12-09

    We measure the loss of power incurred by the bending of a single mode step-indexed optical fiber using vector finite element modeling of the full-wave Maxwell equations in the optical regime. We demonstrate fewer grid elements can be used to model light transmission in longer fiber lengths by using high-order basis functions in conjunction with a high order energy conserving time integration method. The power in the core is measured at several points to determine the percentage loss. We also demonstrate the effect of bending on the light polarization.

  9. Optical Design and Active Optics Methods in Astronomy

    CERN Document Server

    Lemaitre, Gerard R

    2013-01-01

    Optical designs for astronomy involve implementation of active optics and adaptive optics from X-ray to the infrared. Developments and results of active optics methods for telescopes, spectrographs and coronagraph planet finders are presented. The high accuracy and remarkable smoothness of surfaces generated by active optics methods also allow elaborating new optical design types with high aspheric and/or non-axisymmetric surfaces. Depending on the goal and performance requested for a deformable optical surface analytical investigations are carried out with one of the various facets of elasticity theory: small deformation thin plate theory, large deformation thin plate theory, shallow spherical shell theory, weakly conical shell theory. The resulting thickness distribution and associated bending force boundaries can be refined further with finite element analysis. Keywords: active optics, optical design, elasticity theory, astronomical optics, diffractive optics, X-ray optics

  10. Diffraction to De-Diffraction

    CERN Document Server

    Tamari, V F

    2003-01-01

    De-diffraction (DD), a new procedure to totally cancel diffraction effects from wave-fields is presented, whereby the full field from an aperture is utilized and a truncated geometrical field is obtained, allowing infinitely sharp focusing and non-diverging beams. This is done by reversing a diffracted wave-fields' direction. The method is derived from the wave equation and demonstrated in the case of Kirchhoff's integral. An elementary bow-wavelet is described and the DD process is related to quantum and relativity theories.

  11. Paper on Designing Costless THz Paper Optics

    Directory of Open Access Journals (Sweden)

    A. Siemion

    2016-01-01

    Full Text Available Designing diffractive optical elements is crucial for efficient development of THz techniques. Here, we consider paper structures and we analyze their advantages and disadvantages in fast prototyping. The discussion about using material parameters like refractive index and absorption coefficient in designing diffractive optical elements is shown. We analyze the influence of phase step mismatch, of attenuation of real structure, and of nonuniform illumination on the efficiency of the structure. All these features result in worsening of the diffraction efficiency but they do not seem to have such significant influence as shadow effect introduced by fast varying zones. Diffractive elements can be designed with very good accordance with experimental results which makes them ideal for possible applications. Paper optics scan be used more for fast prototyping; nevertheless its performance can be increased by placing it inside water protecting foil.

  12. Full Complex Amplitude Digital Holograms:Design,Fabrication and Optical Characterization

    Institute of Scientific and Technical Information of China (English)

    Neto L G; Cardona P S P; Cirino G A; Mansanoc R D; Verdonck P

    2004-01-01

    Diffractive optical elements have a large number of industrial applications, such as beam shaping and optical filtering. Traditionally, these elements modulate the phase of the incoming light or its amplitude, but not both. To overcome this limitation, full complex-amplitude modulation diffractive optical elements were developed. Well-established integrated circuit fabrication steps were employed to fabricate the devices with high precision. Using this approach, the new element's optical performances are improved also for near field operations. With this device it is possible to obtain 100% efficient spatial filtering and low noise reconstructed images.

  13. An interference-based optical authentication scheme using two phase-only masks with different diffraction distances

    Science.gov (United States)

    Lu, Dajiang; He, Wenqi; Liao, Meihua; Peng, Xiang

    2017-02-01

    A new method to eliminate the security risk of the well-known interference-based optical cryptosystem is proposed. In this method, which is suitable for security authentication application, two phase-only masks are separately placed at different distances from the output plane, where a certification image (public image) can be obtained. To further increase the security and flexibility of this authentication system, we employ one more validation image (secret image), which can be observed at another output plane, for confirming the identity of the user. Only if the two correct masks are properly settled at their positions one could obtain two significant images. Besides, even if the legal users exchange their masks (keys), the authentication process will fail and the authentication results will not reveal any information. Numerical simulations are performed to demonstrate the validity and security of the proposed method.

  14. Application of fluidic lens technology to an adaptive holographic optical element see-through autophoropter

    Science.gov (United States)

    Chancy, Carl H.

    A device for performing an objective eye exam has been developed to automatically determine ophthalmic prescriptions. The closed loop fluidic auto-phoropter has been designed, modeled, fabricated and tested for the automatic measurement and correction of a patient's prescriptions. The adaptive phoropter is designed through the combination of a spherical-powered fluidic lens and two cylindrical fluidic lenses that are orientated 45o relative to each other. In addition, the system incorporates Shack-Hartmann wavefront sensing technology to identify the eye's wavefront error and corresponding prescription. Using the wavefront error information, the fluidic auto-phoropter nulls the eye's lower order wavefront error by applying the appropriate volumes to the fluidic lenses. The combination of the Shack-Hartmann wavefront sensor the fluidic auto-phoropter allows for the identification and control of spherical refractive error, as well as cylinder error and axis; thus, creating a truly automated refractometer and corrective system. The fluidic auto-phoropter is capable of correcting defocus error ranging from -20D to 20D and astigmatism from -10D to 10D. The transmissive see-through design allows for the observation of natural scenes through the system at varying object planes with no additional imaging optics in the patient's line of sight. In this research, two generations of the fluidic auto-phoropter are designed and tested; the first generation uses traditional glass optics for the measurement channel. The second generation of the fluidic auto-phoropter takes advantage of the progress in the development of holographic optical elements (HOEs) to replace all the traditional glass optics. The addition of the HOEs has enabled the development of a more compact, inexpensive and easily reproducible system without compromising its performance. Additionally, the fluidic lenses were tested during a National Aeronautics Space Administration (NASA) parabolic flight campaign, to

  15. Phase effects due to beam misalignment on diffraction gratings

    CERN Document Server

    Lodhia, Deepali; Brueckner, Frank; Carbone, Ludovico; Fulda, Paul; Kokeyama, Keiko; Freise, Andreas

    2013-01-01

    All-reflective interferometer configurations have been proposed for the next generation of gravitational wave detectors, with diffractive elements replacing transmissive optics. However, an additional phase noise creates more stringent conditions for alignment stability. A framework for alignment stability with the use of diffractive elements was required using a Gaussian model. We successfully create such a framework involving modal decomposition to replicate small displacements of the beam (or grating) and show that the modal model does not contain the phase changes seen in an otherwise geometric planewave approach. The modal decomposition description is justified by verifying experimentally that the phase of a diffracted Gaussian beam is independent of the beam shape, achieved by comparing the phase change between a zero-order and first-order mode beam. To interpret our findings we employ a rigorous time-domain simulation to demonstrate that the phase changes resulting from a modal decomposition are correc...

  16. Novel piezoelectric effect and surface plasmon resonance-based elements for MEMS applications.

    Science.gov (United States)

    Ponelyte, Sigita; Palevicius, Arvydas

    2014-04-17

    This paper covers research on novel thin films with periodical microstructure--optical elements, exhibiting a combination of piezoelectric and surface plasmon resonance effects. The research results showed that incorporation of Ag nanoparticles in novel piezoelectric--plasmonic elements shift a dominating peak in the visible light spectrum. This optical window is essential in the design of optical elements for sensing systems. Novel optical elements can be tunable under defined bias and change its main grating parameters (depth and width) influencing the response of diffraction efficiencies. These elements allow opening new avenues in the design of more sensitive and multifunctional microdevices.

  17. Analysis of Fibonacci gratings and their diffraction patterns.

    Science.gov (United States)

    Verma, Rupesh; Sharma, Manoj Kumar; Senthilkumaran, Paramasivam; Banerjee, Varsha

    2014-07-01

    Aperiodic and fractal optical elements are proving to be promising candidates in image-forming devices. In this paper, we analyze the diffraction patterns of Fibonacci gratings (FbGs), which are prototypical examples of aperiodicity. They exhibit novel characteristics such as redundancy and robustness that keep their imaging characteristics intact even when there is significant loss of information. FbGs also contain fractal signatures and are characterized by a fractal dimension. Our study suggests that aperiodic gratings may be better than their fractal counterparts in technologies based on such architectures. We also identify the demarcating features of aperiodic and fractal diffraction, which have been rather fuzzy in the literature so far.

  18. Triple Bragg diffraction in paratellurite crystal

    Science.gov (United States)

    Kotov, V. M.; Averin, S. V.; Voronko, A. I.; Kotov, E. V.; Tikhomirov, S. A.

    2017-07-01

    Triple Bragg diffraction in a paratellurite crystal has been considered for the case when the plane of diffraction is oblique to the optical axis of the crystal. It has been shown that effective photoelastic constants for isotropic and anisotropic diffraction depend on the inclination of the plane of diffraction insignificantly. Triple Bragg diffraction of 0.63-μm coherent radiation in paratellurite at a 47.3-MHz slow acoustic wave has been experimentally demonstrated. For an optical power of 0.69 W delivered to a piezoconverter, the relative intensities of diffraction orders equal 0.4, 0.4, 0.1, and 0.1, respectively.

  19. Fabrication of the High Resolution X-Ray Diffractive Element%高分辨X射线衍射元件的研制

    Institute of Scientific and Technical Information of China (English)

    熊瑛; 刘刚; 田扬超

    2014-01-01

    X射线波带片是纳米X射线成像系统的核心元件之一,为了研制高分辨率X射线波带片,对纳米结构的电子束光刻和高精度电镀进行了实验研究。首先,通过对电子束曝光工艺版图进行优化设计,平衡了邻近效应对纳米结构的影响,有效地控制了光刻胶的扭曲和坍塌。实验结果表明,采用校正的工艺版图,用线曝光方式在800 pC/cm2剂量下可以研制出厚度为270 nm、最外环宽度为50 nm的高分辨率X射线波带片光刻胶结构。然后,在配制的柠檬酸金钾电镀液中,优化了电镀工艺参数。采用金含量为10%的柠檬酸金钾电镀液,各电镀参数pH值为4.2,电镀温度为50℃,电流密度为0.2 A/dm2电镀出高分辨率X射线波带片。%The X-ray zone plate is the core diffraction element in the high-resolution X-ray imaging system. The resolution of the X-ray imaging system depends on the outer zone width of the zone plate. We carried on experimental researches of the electron beam lithography and high precision plating of the nanostructures. First,via the optimization of the layout of the electron beam lithography process,it reduced the influence on the nanostructures of the proximity effect and controlled the distortion or collapse of the photoresist efficiently. The result indicated that it is capable to fabricate the high resolution X-ray zone plate photoresist masks with the thickness of 270 nm and the outmost zone width of 50 nm using the calibration layout by the electron beam lithography in line exposure with the dose of 800 pC/cm2 . Second,we chose appropriate plating parameters of the precision electroplating experiments in the solution of potassium citric monohydrate. The high resolution X-ray zone plates were electroplating with the elec-troplating solution(10% in gold),pH value of 4. 2,temperature of 50 ℃ and the electric current of 0. 2 A/dm2.

  20. Finite-element analysis of the optical-texture-mediated photoresponse in a nematic strip

    Science.gov (United States)

    Chung, Hayoung; Yun, Jung-Hoon; Choi, Joonmyung; Cho, Maenghyo

    2016-10-01

    In a nematic solid, wherein liquid crystal molecules are incorporated into polymeric chains, the chromophore phase is projected onto the polymer conformation, changing the stress-free configuration metric. Stimulated actuation cannot be separated from the structure itself, since the mesoscopic polymer properties dictate the degree and type of shape change. In this research, we focused on self-deforming device programming, inspired by recent optical techniques, to pattern nontrivial alignment textures and induce exotic strain fields on specimens. A finite-element framework incorporating a light-thermo-order coupled constitutive relation and geometric nonlinearities was utilized to compute mechanical deformations for given external stimuli. The distortion of planar strips into various exotic 3D shapes was simulated, and disclination-defect-like liquid crystal texture topographies with different defect strengths produced various many-poled shapes upon irradiation, as observed experimentally. The effects of the boundary conditions and geometric nonlinearities were also examined, exemplifying the need for a comprehensive finite-element-based framework. The same method was applied to textures naturally emerging due to static distortion, and the effects of the prescribed inhomogeneities on the overall deformations, which is the basis of inverse design, were observed. Furthermore, we analyzed the local Poisson-effect-induced instability resulting from inscribing a hedgehog disclination texture onto a solid; the onset of buckling-like deformations was observed energetically, and the relations between this onset and other physical properties were elucidated to enable microstate design while maintaining structural stability. These results will facilitate the development and comprehension of the mechanisms of remotely light-controlled self-assembly and propulsion systems that may soon be realized.