WorldWideScience

Sample records for diet conserved lean

  1. Lean rats gained more body weight than obese ones from a high-fibre diet.

    Science.gov (United States)

    Li, Shaoting; Zhang, Cheng; Gu, Yingyi; Chen, Long; Ou, Shiyi; Wang, Yong; Peng, Xichun

    2015-10-28

    There is controversy over previous findings that a high ratio of Firmicutes to Bacteriodetes helps obese animals harvest energy from the diet. To further investigate the relationship between microbial composition and energy harvest, microbial adaptation to diet and time should be considered. In this study, lean and obese rats were successfully induced with low-fat and high-fat diets. An 8-week high soyabean fibre (HSF)-containing diet was then fed to investigate the interaction between the diet and the rats' gut microbiota, as well as their influence on rats' growth. Rats' body weight (BW) was recorded weekly; their plasma lipids and their gut microbiota at week 11, 15 and 19 were analysed. After the consumption of the HSF diet, BW of lean rats increased significantly (Pcontent of plasma cholesterol was lowered and that of TAG was upgraded in both the groups when fed the HSF diet. There was no significant difference observed at each period between lean and obese rats. In the group of lean rats, the diversity of gut microbiota was elevated strongly (Pbacterial diversity and composition in obese rats were less altered after the HSF diet control. In conclusion, the increased Firmicutes and Bacteriodetes might relate to lean rats' higher BW gain; 'obese microbiota' could not help the hosts harvest more energy from the HSF diet.

  2. Diet-induced obesity, energy metabolism and gut microbiota in C57BL/6J mice fed Western diets based on lean seafood or lean meat mixtures.

    Science.gov (United States)

    Holm, Jacob Bak; Rønnevik, Alexander; Tastesen, Hanne Sørup; Fjære, Even; Fauske, Kristin Røen; Liisberg, Ulrike; Madsen, Lise; Kristiansen, Karsten; Liaset, Bjørn

    2016-05-01

    High protein diets may protect against diet-induced obesity, but little is known regarding the effects of different protein sources consumed at standard levels. We investigated how a mixture of lean seafood or lean meat in a Western background diet modulated diet-induced obesity, energy metabolism and gut microbiota. Male C57BL/6J mice fed a Western diet (WD) containing a mixture of lean seafood (seafood WD) for 12weeks accumulated less fat mass than mice fed a WD containing a mixture of lean meat (meat WD). Meat WD-fed mice exhibited increased fasting blood glucose, impaired glucose clearance, elevated fasting plasma insulin and increased plasma and liver lipid levels. We observed no first choice preference for either of the WDs, but over time, mice fed the seafood WD consumed less energy than mice fed the meat WD. Mice fed the seafood WD exhibited higher spontaneous locomotor activity and a lower respiratory exchange ratio (RER) than mice fed the meat WD. Thus, higher activity together with the decreased energy intake contributed to the different phenotypes observed in mice fed the seafood WD compared to mice fed the meat WD. Comparison of the gut microbiomes of mice fed the two WDs revealed significant differences in the relative abundance of operational taxonomic units (OTUs) belonging to the orders Bacteroidales and Clostridiales, with genes involved in metabolism of aromatic amino acids exhibiting higher relative abundance in the microbiomes of mice fed the seafood WD. Copyright © 2016 Elsevier Inc. All rights reserved.

  3. Tbc1d1 mutation in lean mouse strain confers leanness and protects from diet-induced obesity

    DEFF Research Database (Denmark)

    Chadt, Alexandra; Leicht, Katja; Deshmukh, Atul

    2008-01-01

    We previously identified Nob1 as a quantitative trait locus for high-fat diet-induced obesity and diabetes in genome-wide scans of outcross populations of obese and lean mouse strains. Additional crossbreeding experiments indicated that Nob1 represents an obesity suppressor from the lean Swiss Jim...... Lambert (SJL) strain. Here we identify a SJL-specific mutation in the Tbc1d1 gene that results in a truncated protein lacking the TBC Rab-GTPase-activating protein domain. TBC1D1, which has been recently linked to human obesity, is related to the insulin signaling protein AS160 and is predominantly...... and reduced glucose uptake in isolated skeletal muscle. Our data strongly suggest that mutation of Tbc1d1 suppresses high-fat diet-induced obesity by increasing lipid use in skeletal muscle....

  4. Diet composition alters the satiety effect of cholecystokinin in lean and obese Zucker rats.

    Science.gov (United States)

    Maggio, C A; Haraczkiewicz, E; Vasselli, J R

    1988-01-01

    Although exogenous administration of the peptide cholecystokinin (CCK) has been shown to reduce food intake in a variety of experimental situations, few studies have examined the influence of dietary content upon CCK's effectiveness, particularly in obese states. To evaluate the effectiveness of CCK administration in animals consuming high fat diets, groups of obese and lean Zucker rats were maintained on laboratory chow (CH), a high fat diet isocaloric to chow (IF), or a hypercaloric fat diet (HF). After a 17 hr fast, rats were given intraperitoneal injections of saline or ascending doses of 0.06 to 2.0 micrograms/kg of the synthetic octapeptide of CCK. On all diets, obese rats required higher doses of CCK to significantly reduce feeding and showed smaller intake reductions than lean rats (p less than 0.001). Despite higher baseline caloric intakes (p less than 0.001), rats of both genotypes maintained on HF displayed larger reductions of intake than those fed IF or CH (p less than 0.001). Intake reductions by either genotype maintained on IF or CH were not reliably different. The manner in which the satiety effect of CCK was enhanced in rats consuming the calorically dense, palatable HF diet is unclear but may be related to orosensory and/or postingestive attributes of the diet.

  5. Misclassification probability as obese or lean in hypercaloric and normocaloric diet

    Directory of Open Access Journals (Sweden)

    ANDRÉ F NASCIMENTO

    2008-01-01

    Full Text Available The aim of the present study was to determine the classification error probabilities, as lean or obese, in hypercaloric diet-induced obesity, which depends on the variable used to characterize animal obesity. In addition, the misclassification probabilities in animáis submitted to normocaloric diet were also evaluated. Male Wistar rats were randomly distributed into two groups: normal diet (ND; n=31; 3,5 Kcal/g and hypercaloric diet (HD; n=31; 4,6 Kcal/g. The ND group received commercial Labina rat feed and HD animáis a cycle of five hypercaloric diets for a 14-week period. The variables analysed were body weight, body composition, body weight to length ratio, Lee Índex, body mass Índex and misclassification probability. A 5% significance level was used. The hypercaloric pellet-diet cycle promoted increase of body weight, carcass fat, body weight to length ratio and Lee Índex. The total misclassification probabilities ranged from 19.21% to 40.91%. In conclusión, the results of this experiment show that misclassification probabilities occur when dietary manipulation is used to promote obesity in animáis. This misjudgement ranges from 19.49% to 40.52% in hypercaloric diet and 18.94% to 41.30% in normocaloric diet.

  6. Insulin sensitivity, fat distribution, and adipocytokine response to different diets in lean and obese cats before and after weight loss.

    Science.gov (United States)

    Hoenig, M; Thomaseth, K; Waldron, M; Ferguson, D C

    2007-01-01

    Obesity is a major health problem in cats and a risk factor for diabetes. It has been postulated that cats are always gluconeogenic and that the rise in obesity might be related to high dietary carbohydrates. We examined the effect of a high-carbohydrate/low-protein (HC) and a high-protein/low-carbohydrate (HP) diet on glucose and fat metabolism during euglycemic hyperinsulinemic clamp, adipocytokines, and fat distribution in 12 lean and 16 obese cats before and after weight loss. Feeding diet HP led to greater heat production in lean but not in obese cats. Regardless of diet, obese cats had markedly decreased glucose effectiveness and insulin resistance, but greater suppression of nonesterified fatty acids during the euglycemic hyperinsulinemic clamp was seen in obese cats on diet HC compared with lean cats on either diet or obese cats on diet HP. In contrast to humans, obese cats had abdominal fat equally distributed subcutaneously and intra-abdominally. Weight loss normalized insulin sensitivity; however, increased nonesterified fatty acid suppression was maintained and fat loss was less in cats on diet HC. Adiponectin was negatively and leptin positively correlated with fat mass. Lean cats and cats during weight loss, but not obese cats, adapted to the varying dietary carbohydrate/protein content with changes in substrate oxidation. We conclude that diet HP is beneficial through maintenance of normal insulin sensitivity of fat metabolism in obese cats, facilitating the loss of fat during weight loss, and increasing heat production in lean cats. These data also show that insulin sensitivity of glucose and fat metabolism can be differentially regulated in cats.

  7. Resistance Training Combined With Diet Decreases Body Fat While Preserving Lean Mass Independent of Resting Metabolic Rate: A Randomized Trial.

    Science.gov (United States)

    Miller, Todd; Mull, Stephanie; Aragon, Alan Albert; Krieger, James; Schoenfeld, Brad Jon

    2018-01-01

    The purpose of this study was to determine the effects of resistance training only (RT; n = 10), dietary intervention only (DIET; n = 10), resistance training plus diet (RT+DIET; n = 10), and control (CON; n = 10) on body composition and resting metabolic rate (RMR) in a cohort of 40 premenopausal female volunteers. Subjects in DIET and RT+DIET were provided with daily macronutrient and calorie goals based on DXA and RMR tests, with protein maintained at 3.1 g/kg/day. Subjects in the RT and RT+DIET groups performed a supervised progressive RT program consisting of exercises for all the major muscle groups of the body. Results showed a significant month-by-group interaction for change in fat mass with no significant linear trend for control. The three treatment groups all showed significant linear decreases in fat mass, but the slope of the decrease became progressively steeper from the RT, to DIET, to RT+DIET. A significant linear increase for lean mass was seen for resistance training only. There was a nonsignificant increase in RMR in all groups from Month 0 to Month 4 but no significant month by group interaction. In conclusion, significant reductions in fat mass were achieved by all experimental groups, but results were maximized by RT+DIET. Only the RT group showed significant increases in lean mass.

  8. Cereal based diets modulate some markers of oxidative stress and inflammation in lean and obese Zucker rats

    Directory of Open Access Journals (Sweden)

    Mano Mark

    2011-05-01

    Full Text Available Abstract Background The potential of cereals with high antioxidant capacity for reducing oxidative stress and inflammation in obesity is unknown. This study investigated the impact of wheat bran, barley or a control diet (α-cellulose on the development of oxidative stress and inflammation in lean and obese Zucker rats. Methods Seven wk old, lean and obese male Zucker rats (n = 8/group were fed diets that contained wheat bran, barley or α-cellulose (control. After 3 months on these diets, systolic blood pressure was measured and plasma was analysed for glucose, insulin, lipids, oxygen radical absorbance capacity (ORAC, malondialdehyde, glutathione peroxidase and adipokine concentration (leptin, adiponectin, interleukin (IL-1β, IL-6, TNFα, plasminogen activator inhibitor (PAI-1, monocyte chemotactic protein (MCP-1. Adipokine secretion rates from visceral and subcutaneous adipose tissue explants were also determined. Results Obese rats had higher body weight, systolic blood pressure and fasting blood lipids, glucose, insulin, leptin and IL-1β in comparison to lean rats, and these measures were not reduced by consumption of wheat bran or barley based diets. Serum ORAC tended to be higher in obese rats fed wheat bran and barley in comparison to control (p = 0.06. Obese rats had higher plasma malondialdehyde (p Conclusions A 3-month dietary intervention was sufficient for Zucker obese rats to develop oxidative stress and systemic inflammation. Cereal-based diets with moderate and high antioxidant capacity elicited modest improvements in indices of oxidative stress and inflammation.

  9. Energy dense, protein restricted diet increases adiposity and perturbs metabolism in young, genetically lean pigs.

    Science.gov (United States)

    Fisher, Kimberly D; Scheffler, Tracy L; Kasten, Steven C; Reinholt, Brad M; van Eyk, Gregory R; Escobar, Jeffery; Scheffler, Jason M; Gerrard, David E

    2013-01-01

    Animal models of obesity and metabolic dysregulation during growth (or childhood) are lacking. Our objective was to increase adiposity and induce metabolic syndrome in young, genetically lean pigs. Pre-pubertal female pigs, age 35 d, were fed a high-energy diet (HED; n = 12), containing 15% tallow, 35% refined sugars and 9.1-12.9% crude protein, or a control corn-based diet (n = 11) with 12.2-19.2% crude protein for 16 wk. Initially, HED pigs self-regulated energy intake similar to controls, but by wk 5, consumed more (Pblood glucose increased (Pblood glucose did not return to baseline (P = 0.01), even 4 h post-challenge. During OGTT, glucose area under the curve (AUC) was higher and insulin AUC was lower in HED pigs compared to controls (P = 0.001). Chronic HED intake increased (PAUC and insulin AUC did not improve, supporting that dietary intervention was not sufficient to recover glucose tolerance or insulin production. These data suggest a HED may be used to increase adiposity and disrupt glucose homeostasis in young, growing pigs.

  10. Energy dense, protein restricted diet increases adiposity and perturbs metabolism in young, genetically lean pigs.

    Directory of Open Access Journals (Sweden)

    Kimberly D Fisher

    Full Text Available Animal models of obesity and metabolic dysregulation during growth (or childhood are lacking. Our objective was to increase adiposity and induce metabolic syndrome in young, genetically lean pigs. Pre-pubertal female pigs, age 35 d, were fed a high-energy diet (HED; n = 12, containing 15% tallow, 35% refined sugars and 9.1-12.9% crude protein, or a control corn-based diet (n = 11 with 12.2-19.2% crude protein for 16 wk. Initially, HED pigs self-regulated energy intake similar to controls, but by wk 5, consumed more (P<0.001 energy per kg body weight. At wk 15, pigs were subjected to an oral glucose tolerance test (OGTT; blood glucose increased (P<0.05 in control pigs and returned to baseline levels within 60 min. HED pigs were hyperglycemic at time 0, and blood glucose did not return to baseline (P = 0.01, even 4 h post-challenge. During OGTT, glucose area under the curve (AUC was higher and insulin AUC was lower in HED pigs compared to controls (P = 0.001. Chronic HED intake increased (P<0.05 subcutaneous, intramuscular, and perirenal fat deposition, and induced hyperglycemia, hypoinsulinemia, and low-density lipoprotein hypercholesterolemia. A subset of HED pigs (n = 7 was transitioned back to a control diet for an additional six weeks. These pigs were subjected to an additional OGTT at 22 wk. Glucose AUC and insulin AUC did not improve, supporting that dietary intervention was not sufficient to recover glucose tolerance or insulin production. These data suggest a HED may be used to increase adiposity and disrupt glucose homeostasis in young, growing pigs.

  11. TRPV1 Channels and Gastric Vagal Afferent Signalling in Lean and High Fat Diet Induced Obese Mice.

    Directory of Open Access Journals (Sweden)

    Stephen J Kentish

    Full Text Available Within the gastrointestinal tract vagal afferents play a role in control of food intake and satiety signalling. Activation of mechanosensitive gastric vagal afferents induces satiety. However, gastric vagal afferent responses to mechanical stretch are reduced in high fat diet mice. Transient receptor potential vanilloid 1 channels (TRPV1 are expressed in vagal afferents and knockout of TRPV1 reduces gastro-oesophageal vagal afferent responses to stretch. We aimed to determine the role of TRPV1 on gastric vagal afferent mechanosensitivity and food intake in lean and HFD-induced obese mice.TRPV1+/+ and -/- mice were fed either a standard laboratory diet or high fat diet for 20wks. Gastric emptying of a solid meal and gastric vagal afferent mechanosensitivity was determined.Gastric emptying was delayed in high fat diet mice but there was no difference between TRPV1+/+ and -/- mice on either diet. TRPV1 mRNA expression in whole nodose ganglia of TRPV1+/+ mice was similar in both dietary groups. The TRPV1 agonist N-oleoyldopamine potentiated the response of tension receptors in standard laboratory diet but not high fat diet mice. Food intake was greater in the standard laboratory diet TRPV1-/- compared to TRPV1+/+ mice. This was associated with reduced response of tension receptors to stretch in standard laboratory diet TRPV1-/- mice. Tension receptor responses to stretch were decreased in high fat diet compared to standard laboratory diet TRPV1+/+ mice; an effect not observed in TRPV1-/- mice. Disruption of TRPV1 had no effect on the response of mucosal receptors to mucosal stroking in mice on either diet.TRPV1 channels selectively modulate gastric vagal afferent tension receptor mechanosensitivity and may mediate the reduction in gastric vagal afferent mechanosensitivity in high fat diet-induced obesity.

  12. LEOPARD syndrome-associated SHP2 mutation confers leanness and protection from diet-induced obesity.

    Science.gov (United States)

    Tajan, Mylène; Batut, Aurélie; Cadoudal, Thomas; Deleruyelle, Simon; Le Gonidec, Sophie; Saint Laurent, Céline; Vomscheid, Maëlle; Wanecq, Estelle; Tréguer, Karine; De Rocca Serra-Nédélec, Audrey; Vinel, Claire; Marques, Marie-Adeline; Pozzo, Joffrey; Kunduzova, Oksana; Salles, Jean-Pierre; Tauber, Maithé; Raynal, Patrick; Cavé, Hélène; Edouard, Thomas; Valet, Philippe; Yart, Armelle

    2014-10-21

    LEOPARD syndrome (multiple Lentigines, Electrocardiographic conduction abnormalities, Ocular hypertelorism, Pulmonary stenosis, Abnormal genitalia, Retardation of growth, sensorineural Deafness; LS), also called Noonan syndrome with multiple lentigines (NSML), is a rare autosomal dominant disorder associating various developmental defects, notably cardiopathies, dysmorphism, and short stature. It is mainly caused by mutations of the PTPN11 gene that catalytically inactivate the tyrosine phosphatase SHP2 (Src-homology 2 domain-containing phosphatase 2). Besides its pleiotropic roles during development, SHP2 plays key functions in energetic metabolism regulation. However, the metabolic outcomes of LS mutations have never been examined. Therefore, we performed an extensive metabolic exploration of an original LS mouse model, expressing the T468M mutation of SHP2, frequently borne by LS patients. Our results reveal that, besides expected symptoms, LS animals display a strong reduction of adiposity and resistance to diet-induced obesity, associated with overall better metabolic profile. We provide evidence that LS mutant expression impairs adipogenesis, triggers energy expenditure, and enhances insulin signaling, three features that can contribute to the lean phenotype of LS mice. Interestingly, chronic treatment of LS mice with low doses of MEK inhibitor, but not rapamycin, resulted in weight and adiposity gains. Importantly, preliminary data in a French cohort of LS patients suggests that most of them have lower-than-average body mass index, associated, for tested patients, with reduced adiposity. Altogether, these findings unravel previously unidentified characteristics for LS, which could represent a metabolic benefit for patients, but may also participate to the development or worsening of some traits of the disease. Beyond LS, they also highlight a protective role of SHP2 global LS-mimicking modulation toward the development of obesity and associated disorders.

  13. A 7-day high protein hypocaloric diet promotes cellular metabolic adaptations and attenuates lean mass loss in healthy males

    Directory of Open Access Journals (Sweden)

    Matthew Furber

    2017-08-01

    Full Text Available Mitochondrial quantity and density are associated with increased oxidative metabolism. It has been demonstrated that a hypocaloric high fat/low carbohydrate (HF/LC diet can up-regulate transcriptional markers of mitochondrial biogenesis; this was yet to be explored in vivo subsequent to a high protein/low carbohydrate (HP/LC diet. Thus the aims of the study were to explore such diets on transcriptional markers or mitochondrial biogenesis, body composition and resting metabolic rate (RMR. Forty-five healthy male participants were randomly assigned one of four intervention diets: eucaloric high protein low carbohydrate (PRO-EM, hypocaloric high protein low carbohydrate (PRO-ER, eucaloric high carbohydrate (CHO-EM or hypocaloric high carbohydrate (CHO-ER. The macronutrient ratio of the high protein diet and high carbohydrate diets was 40:30:30% and 10:60:30% (PRO:CHO:FAT respectively. Energy intake for the hypocaloric diets were calculated to match resting metabolic rate. Participants visited the laboratory on 3 occasions each separated by 7 days. On each visit body composition, resting metabolic rate and a muscle biopsy from the vastus lateralis was collected. Prior to visit 1 and 2 habitual diet was consumed which was used as a control, between visit 2 and 3 the intervention diet was consumed continuously for 7-days. No group × time effect was observed, however in the PRO-ER group a significant increase in AMPK, PGC-1α, SIRT1 and SIRT3 mRNA expression was observed post diet intervention groups (p < 0.05. No change was observed in any of the transcriptional markers in the other 3 groups. Despite ∼30% reduction in calorie intake no difference in lean mass (LM loss was observed between the PRO-ER and CHO-EM groups. The results from this study suggest that a 7-day a high protein low carbohydrate hypocaloric diet increased AMPK, SIRT1 and PGC-1 α mRNA expression at rest, and also suggest that increased dietary protein may attenuate LM mass

  14. Lean maturity, lean sustainability

    DEFF Research Database (Denmark)

    Jørgensen, Frances; Matthiesen, Rikke; Nielsen, Jacob

    2007-01-01

    . A framework for describing levels of lean capability is presented, based on a brief review of the literature and experiences from 12 Danish companies currently implementing lean. Although still in its emerging phase, the framework contributes to both theory and practice by describing developmental stages......Although lean is rapidly growing in popularity, its implementation is far from problem free and companies may experience difficulties sustaining long term success. In this paper, it is suggested that sustainable lean requires attention to both performance improvement and capability development...... that support lean capability development and consequently, lean sustainability....

  15. Responses of gut microbiota to diet composition and weight loss in lean and obese mice.

    Science.gov (United States)

    Ravussin, Yann; Koren, Omry; Spor, Ayme; LeDuc, Charles; Gutman, Roee; Stombaugh, Jesse; Knight, Rob; Ley, Ruth E; Leibel, Rudolph L

    2012-04-01

    Maintenance of a reduced body weight is accompanied by a decrease in energy expenditure beyond that accounted for by reduced body mass and composition, as well as by an increased drive to eat. These effects appear to be due--in part--to reductions in circulating leptin concentrations due to loss of body fat. Gut microbiota have been implicated in the regulation of body weight. The effects of weight loss on qualitative aspects of gut microbiota have been studied in humans and mice, but these studies have been confounded by concurrent changes in diet composition, which influence microbial community composition. We studied the impact of 20% weight loss on the microbiota of diet-induced obese (DIO: 60% calories fat) mice on a high-fat diet (HFD). Weight-reduced DIO (DIO-WR) mice had the same body weight and composition as control (CON) ad-libitum (AL) fed mice being fed a control diet (10% calories fat), allowing a direct comparison of diet and weight-perturbation effects. Microbial community composition was assessed by pyrosequencing 16S rRNA genes derived from the ceca of sacrificed animals. There was a strong effect of diet composition on the diversity and composition of the microbiota. The relative abundance of specific members of the microbiota was correlated with circulating leptin concentrations and gene expression levels of inflammation markers in subcutaneous white adipose tissue in all mice. Together, these results suggest that both host adiposity and diet composition impact microbiota composition, possibly through leptin-mediated regulation of mucus production and/or inflammatory processes that alter the gut habitat.

  16. Moderately Low Magnesium Intake Impairs Growth of Lean Body Mass in Obese-Prone and Obese-Resistant Rats Fed a High-Energy Diet

    Directory of Open Access Journals (Sweden)

    Jesse Bertinato

    2016-04-01

    Full Text Available The physical and biochemical changes resulting from moderately low magnesium (Mg intake are not fully understood. Obesity and associated co-morbidities affect Mg metabolism and may exacerbate Mg deficiency and physiological effects. Male rats selectively bred for diet-induced obesity (OP, obese-prone or resistance (OR, obese-resistant were fed a high-fat, high-energy diet containing moderately low (LMg, 0.116 ± 0.001 g/kg or normal (NMg, 0.516 ± 0.007 g/kg Mg for 13 weeks. The growth, body composition, mineral homeostasis, bone development, and glucose metabolism of the rats were examined. OP and OR rats showed differences (p < 0.05 in many physical and biochemical measures regardless of diet. OP and OR rats fed the LMg diet had decreased body weight, lean body mass, decreased femoral size (width, weight, and volume, and serum Mg and potassium concentrations compared to rats fed the NMg diet. The LMg diet increased serum calcium (Ca concentration in both rat strains with a concomitant decrease in serum parathyroid hormone concentration only in the OR strain. In the femur, Mg concentration was reduced, whereas concentrations of Ca and sodium were increased in both strains fed the LMg diet. Plasma glucose and insulin concentrations in an oral glucose tolerance test were similar in rats fed the LMg or NMg diets. These results show that a moderately low Mg diet impairs the growth of lean body mass and alters femoral geometry and mineral metabolism in OP and OR rats fed a high-energy diet.

  17. The Impact of Feeding Diets of High or Low Energy Concentration on Carcass Measurements and the Weight of Primal and Subprimal Lean Cuts

    Directory of Open Access Journals (Sweden)

    A. P. Schinckel

    2012-04-01

    Full Text Available Pigs from four sire lines were allocated to a series of low energy (LE, 3.15 to 3.21 Mcal ME/kg corn-soybean meal-based diets with 16% wheat midds or high energy diets (HE, 3.41 to 3.45 Mcal ME/kg with 4.5 to 4.95% choice white grease. All diets contained 6% DDGS. The HE and LE diets of each of the four phases were formulated to have equal lysine:Mcal ME ratios. Barrows (N = 2,178 and gilts (N = 2,274 were fed either high energy (HE or low energy (LE diets from 27 kg BW to target BWs of 118, 127, 131.5 and 140.6 kg. Carcass primal and subprimal cut weights were collected. The cut weights and carcass measurements were fitted to allometric functions (Y = A CWB of carcass weight. The significance of diet, sex or sire line with A and B was evaluated by linearizing the equations by log to log transformation. The effect of diet on A and B did not interact with sex or sire line. Thus, the final model was B where Diet = −0.5 for the LE and 0.5 for HE diets and A and B are sire line-sex specific parameters. cut weight = (1+bD(Diet A(CW Diet had no affect on loin, Boston butt, picnic, baby back rib, or sparerib weights (p>0.10, bD = −0.003, −0.0029, 0.0002, 0.0047, −0.0025, respectively. Diet affected ham weight (bD = −0.0046, p = 0.01, belly weight (bD = 0.0188, p = 0.001 three-muscle ham weight (bD = −0.014, p = 0.001, boneless loin weight (bD = −0.010, p = 0.001, tenderloin weight (bD = −0.023, p = 0.001, sirloin weight (bD = −0.009, p = 0.034, and fat-free lean mass (bD = −0.0145, p = 0.001. Overall, feeding the LE diets had little impact on primal cut weight except to decrease belly weight. Feeding LE diets increased the weight of lean trimmed cuts by 1 to 2 percent at the same carcass weight.

  18. Protein-enriched diet, with the use of lean red meat, combined with progressive resistance training enhances lean tissue mass and muscle strength and reduces circulating IL-6 concentrations in elderly women: a cluster randomized controlled trial.

    Science.gov (United States)

    Daly, Robin M; O'Connell, Stella L; Mundell, Niamh L; Grimes, Carley A; Dunstan, David W; Nowson, Caryl A

    2014-04-01

    Physical inactivity, inadequate dietary protein, and low-grade systemic inflammation contribute to age-related muscle loss, impaired function, and disability. We assessed the effects of progressive resistance training (PRT) combined with a protein-enriched diet facilitated through lean red meat on lean tissue mass (LTM), muscle size, strength and function, circulating inflammatory markers, blood pressure, and lipids in elderly women. In a 4-mo cluster randomized controlled trial, 100 women aged 60-90 y who were residing in 15 retirement villages were allocated to receive PRT with lean red meat (∼160 g cooked) to be consumed 6 d/wk [resistance training plus lean red meat (RT+Meat) group; n = 53] or control PRT [1 serving pasta or rice/d; control resistance training (CRT) group; n = 47)]. All women undertook PRT 2 times/wk and received 1000 IU vitamin D3/d. The mean (± SD) protein intake was greater in the RT+Meat group than in the CRT group throughout the study (1.3 ± 0.3 compared with 1.1 ± 0.3 g · kg⁻¹ · d⁻¹, respectively; P < 0.05). The RT+Meat group experienced greater gains in total body LTM (0.45 kg; 95% CI: 0.07, 0.84 kg), leg LTM (0.22 kg; 95% CI: 0.02, 0.42 kg), and muscle strength (18%; 95% CI: 0.03, 0.34) than did the CRT group (all P < 0.05). The RT+Meat group also experienced a 10% greater increase in serum insulin-like growth factor I (P < 0.05) and a 16% greater reduction in the proinflammatory marker interleukin-6 (IL-6) (P < 0.05) after 4 mo. There were no between-group differences for the change in blood lipids or blood pressure. A protein-enriched diet equivalent to ∼1.3 g · kg⁻¹ · d⁻¹ achieved through lean red meat is safe and effective for enhancing the effects of PRT on LTM and muscle strength and reducing circulating IL-6 concentrations in elderly women. This trial was registered at the Australian Clinical Trials Registry as ACTRN12609000223235.

  19. Factors Affecting Diet Variation in the Pyrenean Rock Ptarmigan (Lagopus muta pyrenaica: Conservation Implications.

    Directory of Open Access Journals (Sweden)

    Ricardo García-González

    Full Text Available The Pyrenean rock ptarmigan (Lagopus muta pyrenaica lives at one of the southernmost limits of the ptarmigan range. Their small population sizes and the impacts of global changes are limiting factors in the conservation of this threatened subspecies. An effective conservation policy requires precise basic knowledge of a species' food and habitat requirements, information that is practically non-existent for this Pyrenean population. Here, we describe the diet of a ptarmigan population in the Eastern Pyrenees, the environmental factors influencing its variability and the relationship between diet floristic composition and quality. Diet composition was determined by microhistological analysis of faeces and diet quality was estimated from free-urate faecal N content. Our results show that grouse diet is based mainly on arctic-alpine shrubs of the Ericaceae family, as well as dwarf willows (Salix spp. and Dryas octopetala. The most frequently consumed plant species was Rhododendron ferrugineum, but its abundance in the diet was negatively related to the diet nitrogen content. Conversely, the abundance of Salix spp., grass leaves and arthropods increased the nitrogen content of the diet. Seasonality associated with snow-melting contributed the most to variability in the Pyrenean ptarmigan diet, differentiating winter from spring/summer diets. The latter was characterised by a high consumption of dwarf willows, flowers, arthropods and tender forb leaves. Geographic area and sex-age class influenced diet variability to a lesser extent. Current temperature increases in the Pyrenees due to global warming may reduce the persistence and surface area of snow-packs where preferred plants for rock ptarmigan usually grow, thus reducing food availability. The high consumption of Rh. ferrugineum characterised the diet of the Pyrenean population. Given the toxicity of this plant for most herbivores, its potential negative effect on Pyrenean ptarmigan populations

  20. Effects of testosterone treatment on body fat and lean mass in obese men on a hypocaloric diet: a randomised controlled trial.

    Science.gov (United States)

    Ng Tang Fui, Mark; Prendergast, Luke A; Dupuis, Philippe; Raval, Manjri; Strauss, Boyd J; Zajac, Jeffrey D; Grossmann, Mathis

    2016-10-07

    Whether testosterone treatment has benefits on body composition over and above caloric restriction in men is unknown. We hypothesised that testosterone treatment augments diet-induced loss of fat mass and prevents loss of muscle mass. We conducted a randomised double-blind, parallel, placebo controlled trial at a tertiary referral centre. A total of 100 obese men (body mass index ≥ 30 kg/m 2 ) with a total testosterone level of or below 12 nmol/L and a median age of 53 years (interquartile range 47-60) receiving 10 weeks of a very low energy diet (VLED) followed by 46 weeks of weight maintenance were randomly assigned at baseline to 56 weeks of 10-weekly intramuscular testosterone undecanoate (n = 49, cases) or matching placebo (n = 51, controls). The main outcome measures were the between-group difference in fat and lean mass by dual-energy X-ray absorptiometry, and visceral fat area (computed tomography). A total of 82 men completed the study. At study end, compared to controls, cases had greater reductions in fat mass, with a mean adjusted between-group difference (MAD) of -2.9 kg (-5.7 to -0.2; P = 0.04), and in visceral fat (MAD -2678 mm 2 ; -5180 to -176; P = 0.04). Although both groups lost the same lean mass following VLED (cases -3.9 kg (-5.3 to -2.6); controls -4.8 kg (-6.2 to -3.5), P = 0.36), cases regained lean mass (3.3 kg (1.9 to 4.7), P dieting men receiving placebo lost both fat and lean mass, the weight loss with testosterone treatment was almost exclusively due to loss of body fat. clinicaltrials.gov, identifier NCT01616732 , registration date: June 8, 2012.

  1. Many behavioral tendencies associated with right-leaning (conservative) political ideologies are malleable and unrelated to negativity.

    Science.gov (United States)

    Olivola, Christopher Y; Sussman, Abigail B

    2014-06-01

    Recent research has identified several judgment and decision making tendencies associated with right-leaning political ideologies that are difficult (if not impossible) to explain in terms of stable, negative affective appraisals because they (1) are uncorrelated with the negativity of the stimuli being considered, (2) do not reflect divergent affective evaluations, and (3) can be eliminated by superficial manipulations and interventions.

  2. A 7-day high protein hypocaloric diet promotes cellular metabolic adaptations and attenuates lean mass loss in healthy males

    OpenAIRE

    Matthew Furber; Ana Anton-Solanas; Emma Koppe; Charlotte Ashby; Michael Roberts; Justin Roberts

    2017-01-01

    Mitochondrial quantity and density are associated with increased oxidative metabolism. It has been demonstrated that a hypocaloric high fat/low carbohydrate (HF/LC) diet can up-regulate transcriptional markers of mitochondrial biogenesis; this was yet to be explored in vivo subsequent to a high protein/low carbohydrate (HP/LC) diet. Thus the aims of the study were to explore such diets on transcriptional markers or mitochondrial biogenesis, body composition and resting metabolic rate (RMR). F...

  3. Healthcare Lean.

    Science.gov (United States)

    Long, John C

    2003-01-01

    Lean Thinking is an integrated approach to designing, doing and improving the work of people that have come together to produce and deliver goods, services and information. Healthcare Lean is based on the Toyota production system and applies concepts and techniques of Lean Thinking to hospitals and physician practices.

  4. Intermittent Fasting Promotes Fat Loss With Lean Mass Retention, Increased Hypothalamic Norepinephrine Content, and Increased Neuropeptide Y Gene Expression in Diet-Induced Obese Male Mice.

    Science.gov (United States)

    Gotthardt, Juliet D; Verpeut, Jessica L; Yeomans, Bryn L; Yang, Jennifer A; Yasrebi, Ali; Roepke, Troy A; Bello, Nicholas T

    2016-02-01

    Clinical studies indicate alternate-day, intermittent fasting (IMF) protocols result in meaningful weight loss in obese individuals. To further understand the mechanisms sustaining weight loss by IMF, we investigated the metabolic and neural alterations of IMF in obese mice. Male C57/BL6 mice were fed a high-fat diet (HFD; 45% fat) ad libitum for 8 weeks to promote an obese phenotype. Mice were divided into four groups and either maintained on ad libitum HFD, received alternate-day access to HFD (IMF-HFD), and switched to ad libitum low-fat diet (LFD; 10% fat) or received IMF of LFD (IMF-LFD). After 4 weeks, IMF-HFD (∼13%) and IMF-LFD (∼18%) had significantly lower body weights than the HFD. Body fat was also lower (∼40%-52%) in all diet interventions. Lean mass was increased in the IMF-LFD (∼12%-13%) compared with the HFD and IMF-HFD groups. Oral glucose tolerance area under the curve was lower in the IMF-HFD (∼50%), whereas the insulin tolerance area under the curve was reduced in all diet interventions (∼22%-42%). HPLC measurements of hypothalamic tissue homogenates indicated higher (∼55%-60%) norepinephrine (NE) content in the anterior regions of the medial hypothalamus of IMF compared with the ad libitum-fed groups, whereas NE content was higher (∼19%-32%) in posterior regions in the IMF-LFD group only. Relative gene expression of Npy in the arcuate nucleus was increased (∼65%-75%) in IMF groups. Our novel findings indicate that intermittent fasting produces alterations in hypothalamic NE and neuropeptide Y, suggesting the counterregulatory processes of short-term weight loss are associated with an IMF dietary strategy.

  5. Perilipin ablation results in a lean mouse with aberrant adipocyte lipolysis, enhanced leptin production, and resistance to diet-induced obesity.

    Science.gov (United States)

    Tansey, J T; Sztalryd, C; Gruia-Gray, J; Roush, D L; Zee, J V; Gavrilova, O; Reitman, M L; Deng, C X; Li, C; Kimmel, A R; Londos, C

    2001-05-22

    Perilipin coats the lipid droplets of adipocytes and is thought to have a role in regulating triacylglycerol hydrolysis. To study the role of perilipin in vivo, we have created a perilipin knockout mouse. Perilipin null (peri(-/-)) and wild-type (peri(+/+)) mice consume equal amounts of food, but the adipose tissue mass in the null animals is reduced to approximately 30% of that in wild-type animals. Isolated adipocytes of perilipin null mice exhibit elevated basal lipolysis because of the loss of the protective function of perilipin. They also exhibit dramatically attenuated stimulated lipolytic activity, indicating that perilipin is required for maximal lipolytic activity. Plasma leptin concentrations in null animals were greater than expected for the reduced adipose mass. The peri(-/-) animals have a greater lean body mass and increased metabolic rate but they also show an increased tendency to develop glucose intolerance and peripheral insulin resistance. When fed a high-fat diet, the perilipin null animals are resistant to diet-induced obesity but not to glucose intolerance. The data reveal a major role for perilipin in adipose lipid metabolism and suggest perilipin as a potential target for attacking problems associated with obesity.

  6. The Effect of Lean-Seafood and Non-Seafood Diets on Fasting and Postprandial Serum Metabolites and Lipid Species

    DEFF Research Database (Denmark)

    Schmedes, Mette; Balderas, Claudia; Aadland, Eli Kristin

    2018-01-01

    The metabolic effects associated with intake of different dietary protein sources are not well characterized. We aimed to elucidate how two diets that varied in main protein sources affected the fasting and postprandial serum metabolites and lipid species. In a randomized controlled trial with cr...

  7. Lean production

    OpenAIRE

    Veselková, Jana

    2011-01-01

    The goal of this Bachelor's Thesis is to describe the general principles of lean production and afterwards apply these principles in a particular company. Due to the changing conditions on the world market is among companies growing concern about such innovative business systems. The theoretical part of this work deals with the general characteristics of lean production, including their history and focus on Toyota, as the originator of most lean systems. Mentioned are also the economic aspect...

  8. Negotiating Lean

    DEFF Research Database (Denmark)

    Rahbek Pedersen, Esben; Muniche, Mahad

    2011-01-01

    Purpose – The purpose of this paper is to analyse how negotiations between the constituencies affect the processes and outcomes of lean projects in Danish public sector organisations. Design/methodology/approach – The paper is based on a qualitative analysis of interviews with managers...... projects in the Danish public sector. It cannot be concluded that the findings can be generalised to reflect all types of lean projects across organisational and geographical settings. Originality/value – The paper adds value to the relatively scarce literature on lean management in the public sector...... and employees who have participated in lean projects in the Danish public sector. Negotiated order theory serves as the overarching theoretical framework for the analysis. Findings – The paper concludes that the processes and outcomes of lean depend not only on the technology itself, but also the negotiation...

  9. Effects of 4 weight-loss diets differing in fat, protein, and carbohydrate on fat mass, lean mass, visceral adipose tissue, and hepatic fat: results from the POUNDS LOST trial123

    Science.gov (United States)

    de Souza, Russell J; Carey, Vincent J; Hall, Kevin D; LeBoff, Meryl S; Loria, Catherine M; Laranjo, Nancy M; Sacks, Frank M; Smith, Steven R

    2012-01-01

    Background: Weight loss reduces body fat and lean mass, but whether these changes are influenced by macronutrient composition of the diet is unclear. Objective: We determined whether energy-reduced diets that emphasize fat, protein, or carbohydrate differentially reduce total, visceral, or hepatic fat or preserve lean mass. Design: In a subset of participants in a randomized trial of 4 weight-loss diets, body fat and lean mass (n = 424; by using dual-energy X-ray absorptiometry) and abdominal and hepatic fat (n = 165; by using computed tomography) were measured after 6 mo and 2 y. Changes from baseline were compared between assigned amounts of protein (25% compared with 15%) and fat (40% compared with 20%) and across 4 carbohydrate amounts (35% through 65%). Results: At 6 mo, participants lost a mean (±SEM) of 4.2 ± 0.3 kg (12.4%) fat and 2.1 ± 0.3 kg (3.5%) lean mass (both P fat (P ≥ 0.34), or 65% and 35% carbohydrate (P ≥ 0.27). Participants lost 2.3 ± 0.2 kg (13.8%) abdominal fat: 1.5 ± 0.2 kg (13.6%) subcutaneous fat and 0.9 ± 0.1 kg (16.1%) visceral fat (all P fat than did men relative to total-body fat loss. Participants regained ∼40% of these losses by 2 y, with no differences between diets (P ≥ 0.23). Weight loss reduced hepatic fat, but there were no differences between groups (P ≥ 0.28). Dietary goals were not fully met; self-reported contrasts were closer to 2% protein, 8% fat, and 14% carbohydrate at 6 mo and 1%, 7%, and 10%, respectively, at 2 y. Conclusion: Participants lost more fat than lean mass after consumption of all diets, with no differences in changes in body composition, abdominal fat, or hepatic fat between assigned macronutrient amounts. This trial was registered at clinicaltrials.gov as NCT00072995. PMID:22258266

  10. Effects of 4 weight-loss diets differing in fat, protein, and carbohydrate on fat mass, lean mass, visceral adipose tissue, and hepatic fat: results from the POUNDS LOST trial.

    Science.gov (United States)

    de Souza, Russell J; Bray, George A; Carey, Vincent J; Hall, Kevin D; LeBoff, Meryl S; Loria, Catherine M; Laranjo, Nancy M; Sacks, Frank M; Smith, Steven R

    2012-03-01

    Weight loss reduces body fat and lean mass, but whether these changes are influenced by macronutrient composition of the diet is unclear. We determined whether energy-reduced diets that emphasize fat, protein, or carbohydrate differentially reduce total, visceral, or hepatic fat or preserve lean mass. In a subset of participants in a randomized trial of 4 weight-loss diets, body fat and lean mass (n = 424; by using dual-energy X-ray absorptiometry) and abdominal and hepatic fat (n = 165; by using computed tomography) were measured after 6 mo and 2 y. Changes from baseline were compared between assigned amounts of protein (25% compared with 15%) and fat (40% compared with 20%) and across 4 carbohydrate amounts (35% through 65%). At 6 mo, participants lost a mean (±SEM) of 4.2 ± 0.3 kg (12.4%) fat and 2.1 ± 0.3 kg (3.5%) lean mass (both P fat (P ≥ 0.34), or 65% and 35% carbohydrate (P ≥ 0.27). Participants lost 2.3 ± 0.2 kg (13.8%) abdominal fat: 1.5 ± 0.2 kg (13.6%) subcutaneous fat and 0.9 ± 0.1 kg (16.1%) visceral fat (all P fat than did men relative to total-body fat loss. Participants regained ~40% of these losses by 2 y, with no differences between diets (P ≥ 0.23). Weight loss reduced hepatic fat, but there were no differences between groups (P ≥ 0.28). Dietary goals were not fully met; self-reported contrasts were closer to 2% protein, 8% fat, and 14% carbohydrate at 6 mo and 1%, 7%, and 10%, respectively, at 2 y. Participants lost more fat than lean mass after consumption of all diets, with no differences in changes in body composition, abdominal fat, or hepatic fat between assigned macronutrient amounts. This trial was registered at clinicaltrials.gov as NCT00072995.

  11. Lean Management

    OpenAIRE

    Picot, Arnold

    1994-01-01

    In this article the possibility of increase of competitiveness of the domestic enterprises by means of Lean management system is considered, and also the analysis of introduction of the mentioned system at the Russian enterprises is carried out. Besides, the key conditions necessary for successful introduction of system are presented. Lean management is a world-spread way of solving the problems, aimed at making the company competitive; it is the organized activity of staff of the company, fo...

  12. Low-fat, high-carbohydrate (low-glycaemic index) diet induces weight loss and preserves lean body mass in obese healthy subjects: results of a 24-week study.

    Science.gov (United States)

    Bahadori, B; Yazdani-Biuki, B; Krippl, P; Brath, H; Uitz, E; Wascher, T C

    2005-05-01

    The traditional treatment for obesity which is based on a reduced caloric diet has only been partially successful. Contributing factors are not only a poor long-term dietary adherence but also a significant loss of lean body mass and subsequent reduction in energy expenditure. Both low-fat, high-carbohydrate diets and diets using low-glycaemic index (GI) foods are capable of inducing modest weight loss without specific caloric restriction. The purpose of this study was to investigate the feasibility and medium-term effect of a low-fat diet with high (low GI) carbohydrates on weight loss, body composition changes and dietary compliance. Obese patients were recruited from two obesity outpatient clinics. Subjects were given advise by a dietician, then they attended biweekly for 1-hour group meetings. Bodyweight and body composition were measured at baseline and after 24 weeks. One hundred and nine (91%) patients completed the study; after 24 weeks the average weight loss was 8.9 kg (98.6 vs. 89.7 kg; p fat mass (42.5 vs. 36.4 kg; p vs. 53.3 kg; p low-fat, low-GI diet led to a significant reduction of fat mass; adherence to the diet was very good. Our results suggest that such a diet is feasible and should be evaluated in randomized controlled trials.

  13. Spatial and temporal patterns in golden eagle diets in the western United States, with implications for conservation planning

    Science.gov (United States)

    Bedrosian, Geoffrey; Watson, James W.; Steenhof, Karen; Kochert, Michael N.; Preston, Charles R.; Woodbridge, Brian; Williams, Gary E.; Keller, Kent R.; Crandall, Ross H.

    2017-01-01

    Detailed information on diets and predatory ecology of Golden Eagles (Aquila chrysaetos) is essential to prioritize prey species management and to develop landscape-specific conservation strategies, including mitigation of the effects of energy development across the western United States. We compiled published and unpublished data on Golden Eagle diets to (1) summarize available information on Golden Eagle diets in the western U.S., (2) compare diets among biogeographic provinces, and (3) discuss implications for conservation planning and future research. We analyzed 35 studies conducted during the breeding season at 45 locations from 1940–2015. Golden Eagle diet differed among western ecosystems. Lower dietary breadth was associated with desert and shrub-steppe ecosystems and higher breadth with mountain ranges and the Columbia Plateau. Correlations suggest that percentage of leporids in the diet is the factor driving overall diversity of prey and percentage of other prey groups in the diet of Golden Eagles. Leporids were the primary prey of breeding Golden Eagles in 78% of study areas, with sciurids reported as primary prey in 18% of study areas. During the nonbreeding season, Golden Eagles were most frequently recorded feeding on leporids and carrion. Golden Eagles can be described as both generalist and opportunistic predators; they can feed on a wide range of prey species but most frequently feed on abundant medium-sized prey species in a given habitat. Spatial variations in Golden Eagle diet likely reflect regional differences in prey community, whereas temporal trends likely reflect responses to long-term change in prey populations. Evidence suggests dietary shifts from traditional (leporid) prey can have adverse effects on Golden Eagle reproductive rates. Land management practices that support or restore shrub-steppe ecosystem diversity should benefit Golden Eagles. More information is needed on nonbreeding-season diet to determine what food resources

  14. Lean healthcare.

    Science.gov (United States)

    Weinstock, Donna

    2008-01-01

    As healthcare organizations look for new and improved ways to reduce costs and still offer quality healthcare, many are turning to the Toyota Production System of doing business. Rather than focusing on cutting personnel and assets, "lean healthcare" looks to improve patient satisfaction through improved actions and processes.

  15. Prey preferences of the snow leopard (Panthera uncia: regional diet specificity holds global significance for conservation.

    Directory of Open Access Journals (Sweden)

    Salvador Lyngdoh

    Full Text Available The endangered snow leopard is a large felid that is distributed over 1.83 million km(2 globally. Throughout its range it relies on a limited number of prey species in some of the most inhospitable landscapes on the planet where high rates of human persecution exist for both predator and prey. We reviewed 14 published and 11 unpublished studies pertaining to snow leopard diet throughout its range. We calculated prey consumption in terms of frequency of occurrence and biomass consumed based on 1696 analysed scats from throughout the snow leopard's range. Prey biomass consumed was calculated based on the Ackerman's linear correction factor. We identified four distinct physiographic and snow leopard prey type zones, using cluster analysis that had unique prey assemblages and had key prey characteristics which supported snow leopard occurrence there. Levin's index showed the snow leopard had a specialized dietary niche breadth. The main prey of the snow leopard were Siberian ibex (Capra sibrica, blue sheep (Pseudois nayaur, Himalayan tahr (Hemitragus jemlahicus, argali (Ovis ammon and marmots (Marmota spp. The significantly preferred prey species of snow leopard weighed 55±5 kg, while the preferred prey weight range of snow leopard was 36-76 kg with a significant preference for Siberian ibex and blue sheep. Our meta-analysis identified critical dietary resources for snow leopards throughout their distribution and illustrates the importance of understanding regional variation in species ecology; particularly prey species that have global implications for conservation.

  16. Prey preferences of the snow leopard (Panthera uncia): regional diet specificity holds global significance for conservation.

    Science.gov (United States)

    Lyngdoh, Salvador; Shrotriya, Shivam; Goyal, Surendra P; Clements, Hayley; Hayward, Matthew W; Habib, Bilal

    2014-01-01

    The endangered snow leopard is a large felid that is distributed over 1.83 million km(2) globally. Throughout its range it relies on a limited number of prey species in some of the most inhospitable landscapes on the planet where high rates of human persecution exist for both predator and prey. We reviewed 14 published and 11 unpublished studies pertaining to snow leopard diet throughout its range. We calculated prey consumption in terms of frequency of occurrence and biomass consumed based on 1696 analysed scats from throughout the snow leopard's range. Prey biomass consumed was calculated based on the Ackerman's linear correction factor. We identified four distinct physiographic and snow leopard prey type zones, using cluster analysis that had unique prey assemblages and had key prey characteristics which supported snow leopard occurrence there. Levin's index showed the snow leopard had a specialized dietary niche breadth. The main prey of the snow leopard were Siberian ibex (Capra sibrica), blue sheep (Pseudois nayaur), Himalayan tahr (Hemitragus jemlahicus), argali (Ovis ammon) and marmots (Marmota spp). The significantly preferred prey species of snow leopard weighed 55±5 kg, while the preferred prey weight range of snow leopard was 36-76 kg with a significant preference for Siberian ibex and blue sheep. Our meta-analysis identified critical dietary resources for snow leopards throughout their distribution and illustrates the importance of understanding regional variation in species ecology; particularly prey species that have global implications for conservation.

  17. Lean consumption.

    Science.gov (United States)

    Womack, James P; Jones, Daniel T

    2005-03-01

    During the past 20 years, the real price of most consumer goods has fallen worldwide, the variety of goods and the range of sales channels offering them have continued to grow, and product quality has steadily improved. So why is consumption often so frustrating? It doesn't have to be--and shouldn't be--the authors say. They argue that it's time to apply lean thinking to the processes of consumption--to give consumers the full value they want from goods and services with the greatest efficiency and the least pain. Companies may think they save time and money by off-loading work to the consumer but, in fact, the opposite is true. By streamlining their systems for providing goods and services, and by making it easier for customers to buy and use those products and services, a growing number of companies are actually lowering costs while saving everyone time. In the process, these businesses are learning more about their customers, strengthening consumer loyalty, and attracting new customers who are defecting from less user-friendly competitors. The challenge lies with the retailers, service providers, manufacturers, and suppliers that are not used to looking at total cost from the standpoint of the consumer and even less accustomed to working with customers to optimize the consumption process. Lean consumption requires a fundamental shift in the way companies think about the relationship between provision and consumption, and the role their customers play in these processes. It also requires consumers to change the nature of their relationships with the companies they patronize. Lean production has clearly triumphed over similar obstacles in recent years to become the dominant global manufacturing model. Lean consumption, its logical companion, can't be far behind.

  18. EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA); Scientific Opinion on the substantiation of health claims related to very low calorie diets (VLCDs) and reduction in body weight (ID 1410), reduction in the sense of hunger (ID 1411), reduction in body fat mass while maintaining lean

    DEFF Research Database (Denmark)

    Tetens, Inge

    claims in relation to very low calorie diets (VLCDs) and reduction in body weight, reduction in the sense of hunger, reduction in body fat mass while maintaining lean body mass, reduction of post-prandial glycaemic responses, and maintenance of normal blood lipid profile. The scientific substantiation...... that whereas the diet that is the subject of the claim, very low calorie diet, is sufficiently characterised in relation to the following claimed effects: reduction in body weight (ID 1410), reduction in the sense of hunger (ID 1411), and reduction in body fat mass while maintaining lean body mass (ID 1412...... that formula foods for use in very low calorie diets should contain. The Panel concludes that a cause and effect relationship cannot be established between the consumption of a very low calorie diet and reduction of post-prandial glycaemic responses (ID 1414) and maintenance of normal blood lipid profile (ID...

  19. Low-carbohydrate diet induces metabolic depression: a possible mechanism to conserve glycogen.

    Science.gov (United States)

    Winwood-Smith, Hugh S; Franklin, Craig E; White, Craig R

    2017-10-01

    Long-term studies have found that low-carbohydrate diets are more effective for weight loss than calorie-restricted diets in the short term but equally or only marginally more effective in the long term. Low-carbohydrate diets have been linked to reduced glycogen stores and increased feelings of fatigue. We propose that reduced physical activity in response to lowered glycogen explains the diminishing weight loss advantage of low-carbohydrate compared with low-calorie diets over longer time periods. We explored this possibility by feeding adult Drosophila melanogaster a standard or a low-carbohydrate diet for 9 days and measured changes in metabolic rate, glycogen stores, activity, and body mass. We hypothesized that a low-carbohydrate diet would cause a reduction in glycogen stores, which recover over time, a reduction in physical activity, and an increase in resting metabolic rate. The low-carbohydrate diet reduced glycogen stores, which recovered over time. Activity was unaffected by diet, but metabolic rate was reduced, in the low-carbohydrate group. We conclude that metabolic depression could explain the decreased effectiveness of low-carbohydrate diets over time and recommend further investigation of long-term metabolic effects of dietary interventions and a greater focus on physiological plasticity within the study of human nutrition. Copyright © 2017 the American Physiological Society.

  20. Conservation

    NARCIS (Netherlands)

    Noteboom, H.P.

    1985-01-01

    The IUCN/WWF Plants Conservation Programme 1984 — 1985. World Wildlife Fund chose plants to be the subject of their fund-raising campaign in the period 1984 — 1985. The objectives were to: 1. Use information techniques to achieve the conservation objectives of the Plants Programme – to save plants;

  1. Conservation.

    Science.gov (United States)

    National Audubon Society, New York, NY.

    This set of teaching aids consists of seven Audubon Nature Bulletins, providing the teacher and student with informational reading on various topics in conservation. The bulletins have these titles: Plants as Makers of Soil, Water Pollution Control, The Ground Water Table, Conservation--To Keep This Earth Habitable, Our Threatened Air Supply,…

  2. Diets

    Science.gov (United States)

    ... beef and pork, and sweets is limited. Drinking wine in moderation is encouraged. Studies have shown that ... levels and improve cholesterol levels. This diet can benefit people with high blood pressure and may benefit ...

  3. Lean years

    Energy Technology Data Exchange (ETDEWEB)

    Barnet, R J

    1982-01-01

    The author attempts to take stock of five critical systems of resources: Energy, mineral resources, food, water, and human abilities. All five systems have been integrated, to an ever-increasing extent in global control systems. These control systems determine how many people, in what parts of the world, will be faced with hunger, cold, or unemployment. The author tries to find out who is in charge of these control systems, how they have come into existence, and on what strategies they are based. In the final chapter, ''Policy of survival'', the author states that the secret of survival in the lean years to come is still in the dark. Man's most fundamental desire is to be human, i.e. to be in harmony with nature both psychologically and biologically. Politics should take account of this and provide us with the means for doing what is necessary.

  4. Metabolic responses to high-fat diets rich in n-3 or n-6 long-chain polyunsaturated fatty acids in mice selected for either high body weight or leanness explain different health outcomes

    Directory of Open Access Journals (Sweden)

    Nuernberg Karin

    2011-08-01

    Full Text Available Abstract Background Increasing evidence suggests that diets high in polyunsaturated fatty acids (PUFA confer health benefits by improving insulin sensitivity and lipid metabolism in liver, muscle and adipose tissue. Methods The present study investigates metabolic responses in two different lines of mice either selected for high body weight (DU6 leading to rapid obesity development, or selected for high treadmill performance (DUhTP leading to a lean phenotype. At 29 days of age the mice were fed standard chow (7.2% fat, 25.7% protein, or a high-fat diet rich in n-3 PUFA (n-3 HFD, 27.7% fat, 19% protein or a high-fat diet rich in n-6 PUFA (n-6 HFD, 27.7% fat, 18.6% protein for 8 weeks. The aim of the study was to determine the effect of these PUFA-rich high-fat diets on the fatty acid profile and on the protein expression of key components of insulin signalling pathways. Results Plasma concentrations of leptin and insulin were higher in DU6 in comparison with DUhTP mice. The high-fat diets stimulated a strong increase in leptin levels and body fat only in DU6 mice. Muscle and liver fatty acid composition were clearly changed by dietary lipid composition. In both lines of mice n-3 HFD feeding significantly reduced the hepatic insulin receptor β protein concentration which may explain decreased insulin action in liver. In contrast, protein kinase C ζ expression increased strongly in abdominal fat of n-3 HFD fed DUhTP mice, indicating enhanced insulin sensitivity in adipose tissue. Conclusions A diet high in n-3 PUFA may facilitate a shift from fuel deposition in liver to fuel storage as fat in adipose tissue in mice. Tissue specific changes in insulin sensitivity may describe, at least in part, the health improving properties of dietary n-3 PUFA. However, important genotype-diet interactions may explain why such diets have little effect in some population groups.

  5. Use of Novel High-Protein Functional Food Products as Part of a Calorie-Restricted Diet to Reduce Insulin Resistance and Increase Lean Body Mass in Adults: A Randomized Controlled Trial

    Directory of Open Access Journals (Sweden)

    Carol S. Johnston

    2017-10-01

    Full Text Available Significant reductions in insulin resistance (IR can be achieved by either calorie restriction or by the increase of lean mass. However, calorie restriction usually results in significant loss of lean mass. A 6-week randomized controlled feeding trial was conducted to determine if a calorie-restricted, high-protein diet (~125 g protein/day consumed evenly throughout the day using novel functional foods would be more successful for reducing IR in comparison to a conventional diet (~80 g protein/day with a similar level of calorie restriction. Healthy adults (age 20–75 years; body mass index, 20–42 kg/m2 with raised triglyceride/high-density lipoprotein ratios were randomly assigned to the control group (CON: test foods prepared using gluten-free commercial pasta and cereal or to the high-protein group (HPR: test foods prepared using novel high-protein pasta and cereal both rich in wheat gluten. Mean weight loss did not differ between groups (−2.7 ± 2.6 and −3.2 ± 3.0 kg for CON (n = 11 and HPR (n = 10 respectively, p = 0.801; however, the 6-week change in fat-free mass (FFM differed significantly between groups (−0.5 ± 1.5 and +1.5 ± 3.8 kg for CON and HPR respectively, p = 0.008. IR improved in HPR vs. CON participants (homeostasis model assessment-estimated insulin resistance [HOMAIR] change: −1.7 ± 1.4 and −0.7 ± 0.7 respectively; p = 0.020. The change in HOMA-IR was related to the change in FFM among participants (r = −0.511, p = 0.021. Thus, a high-protein diet using novel functional foods combined with modest calorie restriction was 140% more effective for reducing HOMA-IR in healthy adults compared to a lower protein, standard diet with an equal level of calorie restriction.

  6. DNA Metabarcoding Reveals Diet Overlap between the Endangered Walia Ibex and Domestic Goats - Implications for Conservation

    Science.gov (United States)

    Gebremedhin, Berihun; Flagstad, Øystein; Bekele, Afework; Chala, Desalegn; Bakkestuen, Vegar; Boessenkool, Sanne; Popp, Magnus; Gussarova, Galina; Schrøder-Nielsen, Audun; Nemomissa, Sileshi; Brochmann, Christian; Stenseth, Nils Chr.

    2016-01-01

    Human population expansion and associated degradation of the habitat of many wildlife species cause loss of biodiversity and species extinctions. The small Simen Mountains National Park in Ethiopia is one of the last strongholds for the preservation of a number of afro-alpine mammals, plants and birds, and it is home to the rare endemic Walia ibex, Capra walie. The narrow distribution range of this species as well as potential competition for resources with livestock, especially with domestic goat, Capra hircus, may compromise its future survival. Based on a curated afro-alpine taxonomic reference library constructed for plant taxon identification, we investigated the diet of the Walia ibex and addressed the dietary overlap with domestic goat using DNA metabarcoding of faecal samples. Faeces of both species were collected from different localities in the National Park. We show that both species are browsers, with forbs, shrubs and trees comprising the largest proportion of their diet, supplemented by grasses. There was a considerable overlap in dietary preferences. Several of the preferred diet items of the Walia ibex (Alchemilla sp., Hypericum revolutum, Erica arborea and Rumex sp.) were also among the most preferred diet items of the domestic goat. These results indicate that there is potential for competition between the two species, especially during the dry season, when resources are limited. Our findings, in combination with the expected increase in domestic herbivores, suggest that management plans should consider the potential threat posed by domestic goats to ensure future survival of the endangered Walia ibex. PMID:27416020

  7. Phytase supplementation increases bone mineral density, lean body mass and voluntary physical activity in rats fed a low-zinc diet.

    Science.gov (United States)

    Scrimgeour, Angus G; Marchitelli, Louis J; Whicker, Jered S; Song, Yang; Ho, Emily; Young, Andrew J

    2010-07-01

    Phytic acid forms insoluble complexes with nutritionally essential minerals, including zinc (Zn). Animal studies show that addition of microbial phytase (P) to low-Zn diets improves Zn status and bone strength. The present study determined the effects of phytase supplementation on bone mineral density (BMD), body composition and voluntary running activity of male rats fed a high phytic acid, low-Zn diet. In a factorial design, rats were assigned to ZnLO (5 mg/kg diet), ZnLO+P (ZnLO diet with 1500 U phytase/kg) or ZnAD (30 mg/kg diet) groups and were divided into voluntary exercise (EX) or sedentary (SED) groups, for 9 weeks. SED rats were significantly heavier from the second week, and no catch-up growth occurred in EX rats. Feed intakes were not different between groups throughout the study. ZnLO animals had decreased food efficiency ratios compared to both phytase-supplemented (ZnLO+P) and Zn-adequate (ZnAD) animals (Pbone mineral content (BMC), bone area (BA) and BMD than rats fed ZnLO diets; and in rats fed ZnAD diets these indices were the highest. The dietary effects on BMC, BA and BMD were independent of activity level. We conclude that consuming supplemental dietary phytase or dietary Zn additively enhances Zn status to increase BMD, LBM and voluntary physical activity in rats fed a low-Zn diet. While the findings confirm that bone health is vulnerable to disruption by moderate Zn deficiency in rats, this new data suggests that if dietary Zn is limiting, supplemental phytase may have beneficial effects on LBM and performance activity. (c) 2010 Elsevier Inc. All rights reserved.

  8. Prey Preferences of the Snow Leopard (Panthera uncia): Regional Diet Specificity Holds Global Significance for Conservation

    OpenAIRE

    Lyngdoh, Salvador; Shrotriya, Shivam; Goyal, Surendra P.; Clements, Hayley; Hayward, Matthew W.; Habib, Bilal

    2014-01-01

    The endangered snow leopard is a large felid that is distributed over 1.83 million km(2) globally. Throughout its range it relies on a limited number of prey species in some of the most inhospitable landscapes on the planet where high rates of human persecution exist for both predator and prey. We reviewed 14 published and 11 unpublished studies pertaining to snow leopard diet throughout its range. We calculated prey consumption in terms of frequency of occurrence and biomass consumed based o...

  9. Effects of progressive resistance training combined with a protein-enriched lean red meat diet on health-related quality of life in elderly women: secondary analysis of a 4-month cluster randomised controlled trial.

    Science.gov (United States)

    Torres, Susan J; Robinson, Sian; Orellana, Liliana; O'Connell, Stella L; Grimes, Carley A; Mundell, Niamh L; Dunstan, David W; Nowson, Caryl A; Daly, Robin M

    2017-06-01

    Resistance training (RT) and increased dietary protein are recommended to attenuate age-related muscle loss in the elderly. This study examined the effect of a lean red meat protein-enriched diet combined with progressive resistance training (RT+Meat) on health-related quality of life (HR-QoL) in elderly women. In this 4-month cluster randomised controlled trial, 100 women aged 60-90 years (mean 73 years) from self-care retirement villages participated in RT twice a week and were allocated either 160 g/d (cooked) lean red meat consumed across 2 meals/d, 6 d/week or ≥1 serving/d (25-30 g) carbohydrates (control group, CRT). HR-QoL (SF-36 Health Survey questionnaire), lower limb maximum muscle strength and lean tissue mass (LTM) (dual-energy X-ray absorptiometry) were assessed at baseline and 4 months. In all, ninety-one women (91 %) completed the study (RT+Meat (n 48); CRT (n 43)). Mean protein intake was greater in RT+Meat than CRT throughout the study (1·3 (sd 0·3) v. 1·1 (sd 0·3) g/kg per d, P<0·05). Exercise compliance (74 %) was not different between groups. After 4 months there was a significant net benefit in the RT+Meat compared with CRT group for overall HR-QoL and the physical component summary (PCS) score (P<0·01), but there were no changes in either group in the mental component summary (MCS) score. Changes in lower limb muscle strength, but not LTM, were positively associated with changes in overall HR-QoL (muscle strength, β: 2·2 (95 % CI 0·1, 4·3), P<0·05). In conclusion, a combination of RT and increased dietary protein led to greater net benefits in overall HR-QoL in elderly women compared with RT alone, which was because of greater improvements in PCS rather than MCS.

  10. The effect of a high monounsaturated fat diet on body weight, back fat and loin muscle growth in high and medium-lean pig genotypes

    Energy Technology Data Exchange (ETDEWEB)

    Mas, G.; Soler, J.; Llavall, M.; Tibau, J.; Roca, R.; Coll, D.; Fabrega, E.

    2012-11-01

    The objective of this study was to evaluate whether the use of a diet rich in oleic acid could have an effect on daily weight gain, backfat and loin muscle (Longissimus thoracis) depth. One hundred and ninety-two barrows and gilts, from two genotypes were fed a grain and soy diet (CONTROL with 28% C18:1) or a similar diet enriched with oleic acid (HO with 43% C18:1, Greedy-Grass OLIVA). The pigs were housed in 16 pens in groups of 12 according to their sex, diet and genotype. From 75 days of age every three weeks, the pigs were weighed and the backfat and loin muscle depth were ultrasonically recorded (PIGLOG). The inclusion of the dietary fat had no significant effect on the growth variables nor on the backfat and loin muscle depth measurements taken. However, the barrows resulted in higher live weight and backfat compared to the gilts at the end of the trial. Conversely, the gilts showed higher loin depth. Moreover, York-sired pigs were heavier than Pietrain-sired pigs during the whole trial and showed higher backfat at the last two measurements. Pietrain-sired pigs had higher loin muscle depth at the last measurements. The results of the present study suggest that the addition of a dietary fat into diets aiming at modifying the meat fatty acid profile has no detrimental effects on performance variables, or on backfat and loin muscle growth and thus, no negative economic impact for producers. (Author) 37 refs.

  11. Diet and conservation implications of an invasive chameleon, Chamaeleo jacksonii (Squamata: Chamaeleonidae) in Hawaii

    Science.gov (United States)

    Kraus, Fred; Medeiros, Arthur; Preston, David; Jarnevich, Catherine S.; Rodda, Gordon H.

    2012-01-01

    We summarize information on current distribution of the invasive lizard Chamaeleo jacksonii and predict its potential distribution in the Hawaiian Islands. Potential distribution maps are based on climate models developed from known localities in its native range and its Hawaiian range. We also present results of analysis of stomach contents of a sample of 34 chameleons collected from native, predominantly dryland, forest on Maui. These data are the first summarizing prey range of this non-native species in an invaded native-forest setting. Potential distribution models predict that the species can occur throughout most of Hawaii from sea level to >2,100 m elevation. Important features of this data set are that approximately one-third of the diet of these lizards is native insects, and the lizards are consuming large numbers of arthropods each day. Prey sizes span virtually the entire gamut of native Hawaiian arthropod diversity, thereby placing a large number of native species at risk of predation. Our dietary results contrast with expectations for most iguanian lizards and support suggestions that chameleons comprise a third distinct foraging-mode category among saurians. The combination of expanding distribution, large potential range size, broad diet, high predation rates, and high densities of these chameleons imply that they may well become a serious threat to some of the Hawaiian fauna.

  12. Internal lean practitioner's challenges in lean principles ...

    African Journals Online (AJOL)

    The approach to this paper is to answer the questions such as “how does internal management commitment impact the Lean principles?”, “how does Supply Chain Management practices impact the lean principles?”, “can Supply Chain Management practices be embedded with internal management commitment?

  13. Implementation of lean leadership

    Directory of Open Access Journals (Sweden)

    Trenkner Małgorzata

    2016-12-01

    Full Text Available The Toyota case proves that lean leadership is of critical importance for the successful implementation and permanent functioning of Lean Production System. There is no ready formula for developing Toyota style lean leadership. However, one may gain inspiration from its experience.

  14. Lean information management

    NARCIS (Netherlands)

    Hammer, D.K.

    1997-01-01

    The concept of a Lean Enterprise has proven to be extremely valuable for making companies fit for today's competitive business environment. Lean Information Management denotes the type of information management that is appropriate for such all organization. According to the paradigm of a Lean

  15. Foods, macronutrients and fibre in the diet of blue sheep (Psuedois nayaur) in the Annapurna Conservation Area of Nepal.

    Science.gov (United States)

    Aryal, Achyut; Coogan, Sean C P; Ji, Weihong; Rothman, Jessica M; Raubenheimer, David

    2015-09-01

    Food resources are often critical regulating factors affecting individual fitness and population densities. In the Himalayan Mountains, Bharal "blue sheep" (Pseudois nayaur) are the main food resource for the endangered snow leopard (Panthera uncia), as well as being preyed upon by other predators. Blue sheep, however, may face a number of challenges including food resource competition with other wild and domestic ungulates, and hunting pressure. Here, we characterized the diet of blue sheep in the Annapurna Conservation Area (ACA) of Nepal and conducted proximate nutritional analysis on a limited number of plants identified as foods. Furthermore, we investigated the macronutrient and fiber balance of these plants using nutritional geometry which is a state-space approach to modeling multidimensional and interactive nutritional aspects of foraging. A total of 19 plant species/genera were identified in blue sheep pellets using microhistological analysis. On average, across seasons and regions of the study area, the two most frequently occurring plants in pellets were graminoids: Kobressia sp. and Carex spp. The macronutrient balance of Kobresia sp. was relatively high in carbohydrate and low in protein, while other plants in the diet were generally higher in protein and lipid content. Analysis of fiber balance showed that the two most consumed plants of blue sheep (i.e., Kobresia spp. and Carex spp.) contained the highest concentration of hemicellulose, which is likely digestible by blue sheep. The hemicellulose and lignin balance of plants ranged relatively widely, yet their cellulose contents showed less variation. Foraging by blue sheep may therefore be a balance between consuming highly digestible high-carbohydrate plants and plants less-digestible but higher in protein and/or lipid.

  16. Utilization of conserved Lucerne Hay as a Protein Supplement in the Diet of Calves on Smallholder Farms of Kenya

    International Nuclear Information System (INIS)

    Kiragu, J.W.; Tamminga, S.; Mitaru, B.N.

    1999-01-01

    The nutritive value and the conserved lucerne hay as a protein supplement in the diet of calves reared on the smallholder farms of Kenya was studied in relation to feed intake, growth rate and efficiency of feed utilization. Forty Friesian calves aged one week were allocate in a completely randomised design experiment to the following five dietary treatments: Napier Grass only (N) and supplemented with 33% lucerne (NL33), 50% lucerne (NL50), 67% lucerne (NL67) and 100% lucerne hay (L100) in the diet of calves. Results showed that increasing the level of lucerne supplementation in the ratio of dairy calves from 50 to 100% lucerne hay significantly (P <0.01) increased the crude protein content the mixed ration from 13.8 t o 16.88% CP which would meet the protein, requirement of the growing ruminants. The growth rate of calves increased linearly (P < 0.001) with the levels of lucerne supplements fro 50 to 100 % lucerne hay resulting in 0.02 kg gain more growth per day per kg additional feed supplement given. The cost of production per kg gain decreased with increase in the level of lucerne supplementation and cost of could further reduced by farmers growing lucerne on the smallholder farms for use in compounding home-made ration at the farm level. Result of these study further shows that lucerne as a leguminous forage has ability to fix Nitrogen in the soil which has significantly effect on soil fertility, increased crop yields and reduction in the cost of fertilisers. It is recommended that an acre of lucerne could yield five to seven tons of dry matter per year sufficient to rear a herd of 15 to 20 calves for a period of 1 year. This research has further shown that a pure stand of lucerne crop which is very deep rooted crop has a longevity of five to seven years in the same field and that pest and diseases are not of a serious problem to lucerne, thus making it excellent supplementary legume to the Napier grass in the diet of calves on smallholder farms of Kenya

  17. Performance effect of Lean

    DEFF Research Database (Denmark)

    Kristensen, Thomas Borup; Israelsen, Poul

    2016-01-01

    To understand how the practices of Lean affect performance, we tested and validated a system-wide approach using mediating relationships in a structural equation model. We used a cross-sectional survey of 200 Danish companies that indicated that they used Lean. Thus, this study is especially...... relevant to Denmark, but the approach is empirically more generalizable. We show that the effect of Lean standardized flow production practices on performance is mediated by analytical continuous improvement empowerment practices and by delegation of decision rights practices. Thus, standardized flow...... of decision rights. The paper provides evidence that supports the view that middle managers’ actions further enhance performance in Lean companies. The right Lean behavior by middle managers increases the level of analytical continuous improvement empowerment. In total, high-performing Lean companies...

  18. LEAN dig ikke tilbage

    DEFF Research Database (Denmark)

    Weirsøe, Mathilde

    2011-01-01

    Fit, slankere, hurtigst. Lean-konceptet ruller ind over de offentlige institutioner, hvor det skal trimme og effektivisere arbejdsprocesser. Men hvor er den maksimale grænse for effektivitet? Er der et ’tipping point’, hvor Lean ikke længere motiverer, men snarere udmatter......Fit, slankere, hurtigst. Lean-konceptet ruller ind over de offentlige institutioner, hvor det skal trimme og effektivisere arbejdsprocesser. Men hvor er den maksimale grænse for effektivitet? Er der et ’tipping point’, hvor Lean ikke længere motiverer, men snarere udmatter...

  19. Lean Production : Werkzeuge zur Realisierung

    OpenAIRE

    Binner, Hartmut F.

    2008-01-01

    INHALT: l. Einleitung und Standortbestimmung 2. Japanische Wertvorstellungen 3. Inhalte der Lean Production 4. Fertigungssegmentierung 5. Informationsmanagement mit CIM- und Logistik-Komponenten 6. Logistikgerechte Strukturen der Lean Production 7. Realisierung der Lean Production 8. Zusammenfassung

  20. Lean and Information Technology Toolkit

    Science.gov (United States)

    The Lean and Information Technology Toolkit is a how-to guide which provides resources to environmental agencies to help them use Lean Startup, Lean process improvement, and Agile tools to streamline and automate processes.

  1. Moving on - beyond lean thinking

    OpenAIRE

    Koskela, Lauri

    2004-01-01

    Lean Thinking is currently often positioned as the underlying theory of lean production among practitioners and academics, although its originators, Womack and Jones, seem not to have presented it as a theory. This paper endeavors to analyze whether Lean Thinking can be viewed as a theory of lean production. For this purpose, a critical assessment of Lean Thinking is carried out. Lean Thinking is argued to lack an adequate conceptualization of production, which has led to imprecise concepts, ...

  2. Evaluation of black bear (Ursus americanus) diet and consequences in its conservation in Sierra de Picachos, Nuevo León, Mexico

    OpenAIRE

    Juárez-Casillas, Luis Antonio; Varas, Cora

    2013-01-01

    Black bears (Ursus americanus) are considered endangered in Mexico. In northern Mexico, bears are considered responsible for preying on livestock, damaging private property, and crops; therefore they are killed to protect locals' livelihoods. There is a need to understand bears' ecological requirements in order to create conservation plans that include human-bear conflict resolution and that reduce the hunting of this endangered species. We studied the diet of black bears in the Sierra de Pic...

  3. lean-ISD.

    Science.gov (United States)

    Wallace, Guy W.

    2001-01-01

    Explains lean instructional systems design/development (ISD) as it relates to curriculum architecture design, based on Japan's lean production system. Discusses performance-based systems; ISD models; processes for organizational training and development; curriculum architecture to support job performance; and modular curriculum development. (LRW)

  4. Healthy Lean Through HRD

    DEFF Research Database (Denmark)

    Jørgensen, Frances

    2008-01-01

    The paper reports on findings from the initial, exploratory phase of a longitudinal research study aimed at developing a framework for implementing lean while ensuring employee well-being. Data from observations and in-depth dialogues with persons involved in lean implementation, along...

  5. LEAN and energy efficiency; Lean og energieffektivisering

    Energy Technology Data Exchange (ETDEWEB)

    Jespersen, Per T; Vesterager Christensen, D; Andersen, Hans [Teknologisk Institut, Energi og Klima, Taastrup (Denmark); Dam Wied, M; Dam, M [NRGi Raadgivning, Aarhus (Denmark); Thorndahl, M [Horsens Kommune, Horsens (Denmark); Weldingh, P [Lokal Energi, Viby J. (Denmark); Maagoee, P; Kristensen, Kenneth T [Viegand og Maagoee, Copenhagen (Denmark); Kirketerp Friis, A [Novozymes, Bagsvaerd (Denmark)

    2010-03-15

    By means of theoretical reports and three specific cases, the project showed how Lean principles can improve energy consulting efficiency, thus making it easier for end-users and energy consultants to record and document energy savings achieved. The three cases documented various types of extra benefits of integrating energy efficiency improvement in Lean processes. As a result of process optimisation, one manufacturing company successfully reduced both staffing and energy consumption, thus making production in Denmark competitive with out-sourced production in Asia. (LN)

  6. Low-protein diet for conservative management of chronic kidney disease: a systematic review and meta-analysis of controlled trials.

    Science.gov (United States)

    Rhee, Connie M; Ahmadi, Seyed-Foad; Kovesdy, Csaba P; Kalantar-Zadeh, Kamyar

    2018-04-01

    Recent data pose the question whether conservative management of chronic kidney disease (CKD) by means of a low-protein diet can be a safe and effective means to avoid or defer transition to dialysis therapy without causing protein-energy wasting or cachexia. We aimed to systematically review and meta-analyse the controlled clinical trials with adequate participants in each trial, providing rigorous contemporary evidence of the impact of a low-protein diet in the management of uraemia and its complications in patients with CKD. We searched MEDLINE (PubMed) and other sources for controlled trials on CKD to compare clinical management of CKD patients under various levels of dietary protein intake or to compare restricted protein intake with other interventions. Studies with similar patients, interventions, and outcomes were included in the meta-analyses. We identified 16 controlled trials of low-protein diet in CKD that met the stringent qualification criteria including having 30 or more participants. Compared with diets with protein intake of >0.8 g/kg/day, diets with restricted protein intake (disease, and a trend towards lower rates of all-cause death. In addition, very-low-protein diets (protein intake kidney function and reduction in the rate of progression to end-stage renal disease. Safety and adherence to a low-protein diet was not inferior to a normal protein diet, and there was no difference in the rate of malnutrition or protein-energy wasting. In this pooled analysis of moderate-size controlled trials, a low-protein diet appears to enhance the conservative management of non-dialysis-dependent CKD and may be considered as a potential option for CKD patients who wish to avoid or defer dialysis initiation and to slow down the progression of CKD, while the risk of protein-energy wasting and cachexia remains minimal. © 2017 The Authors. Journal of Cachexia, Sarcopenia and Muscle published by John Wiley & Sons Ltd on behalf of the Society on Sarcopenia

  7. Macronutrients and energy content of oral hospital diet prescribed to chronic kidney disease patients on conservative treatment.

    Science.gov (United States)

    David Silva, Janiara; Louvera Silva, Karine A; Baggio, Sueli R; Morgano, Marcelo A; Aguiar Nemer, Aline S; Quintaes, Késia D

    2014-11-01

    The contribution of diet and treatment planning in the treatment of Chronic Kidney Disease (CKD) has been recognized as having a significant clinical impact if introduced early. determine the levels of carbohydrates, proteins, lipids, energy and energy density (ED) in an oral hospital diet prescribed to CKD patients, and to evaluate the adequacy of this diet with respect to dietary recommendations. Diets were collected in a Brazilian public hospital on two non-consecutive days of six different weeks. The carbohydrate, protein, and lipid (total, saturated, monounsaturated, polyunsaturated, linoleic, linolenic and trans fatty acids) contents were determined in a laboratory. The amount of energy and the ED of the diets were calculated using the correction factor Atware and by dividing the total energy of the diet by weight, respectively. About 14.3% of the diets produced for patients with CKD were analyzed. The average density of the diets was low (0.7 kcal/g). In terms of nutritional adequacy, the average lipid content (15%) and linolenic fatty acid content (0.4%) were below the recommendation, as was energy (23.4 kcal / kg / day). The average carbohydrate content (63.5%) and protein content (1.0 g/kg/day) exceeded the recommendations levels. The oral hospital diet prepared for patients with CKD were considered unbalanced, and an unfavorable clinical treatment for these patients. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

  8. Diccionario Lean Manufacturing

    OpenAIRE

    Muñoz Ellner, Sarah María

    2016-01-01

    El Diccionario Bilingüe de Lean Manufacturing pretende ser un instrumento de apoyo a todo aquel que tenga la responsabilidad de planear, ejecutar o simplemente algún interés con las actividades de Lean Manufacturing, aportando así también conceptos claros tanto en castellano como en inglés, con el fin de entender de forma integral el alcance mismo que puede llegar a tener dicha filosofía, al igual que se proporcionara una serie de siglas y herramientas para la implementación del Lean Manufact...

  9. Lean og arbejdsmiljø

    DEFF Research Database (Denmark)

    Jensen, Kenneth

    Bogen tager udgangspunkt i en undersøgelse af 10 private og offentlige virksomheders erfaringer med lean. Undersøgelsen viser at der ikke findes entydige sammenhænge mellem lean og det psykosociale arbejdsmiljø. Bogen forholder sig til sammenhængen mellem lean og ledelse, lean og medarbejderens...... rolle, lean og lean og forandringsprocessen. Bogen kommer desuden med anbefalinger til hvorledes virksomheden kan gribe dialogen an for at opnå et godt lean forløb der inddrager hensynet til og effekterne af et godt psykosocialt arbejdsmiljø....

  10. Orchestrating Lean Implementation

    DEFF Research Database (Denmark)

    Riis, Jens Ove; Mikkelsen, Hans; Andersen, Jesper Rank

    2008-01-01

    The notion of Lean Manufacturing is not merely confined to a set of well defined techniques, but represents a broad approach to managing a company. Working with lean entails many aspects, such as production planning and control, production engineering, product development, supply chain......, and organizational issues. To become effective, many functional areas and departments must be involved. At the same time companies are embedded in a dynamic environment. The aim of the paper is to propose a comprehensive approach to better implementation of lean initiatives, based on two empirical studies. The paper...... will discuss how a concerted effort can be staged taking into account the interdependencies among individual improvement initiatives. The notion of orchestration will be introduced, and several means for orchestration will be presented. Critical behavioral issues for lean implementation will be discussed....

  11. Lean Government Methods Guide

    Science.gov (United States)

    This Guide focuses primarily on Lean production, which is an organizational improvement philosophy and set of methods that originated in manufacturing but has been expanded to government and service sectors.

  12. Lean Enterprise Value Phase

    National Research Council Canada - National Science Library

    Shields, John T

    2005-01-01

    ... using a philosophy called "lean." LAl's mission is to research, develop, and promulgate practices, tools, and knowledge that enable and accelerate the envisioned transformation of the greater US aerospace enterprise through people and processes...

  13. The lean service machine.

    Science.gov (United States)

    Swank, Cynthia Karen

    2003-10-01

    Jefferson Pilot Financial, a life insurance and annuities firm, like many U.S. service companies at the end of the 1990s was looking for new ways to grow. Its top managers recognized that JPF needed to differentiate itself in the eyes of its customers, the independent life-insurance advisers who sell and service policies. To establish itself as these advisers' preferred partner, it set out to reduce the turnaround time on policy applications, simplify the submission process, and reduce errors. JPF's managers looked to the "lean production" practices that U.S. manufacturers adopted in response to competition from Japanese companies. Lean production is built around the concept of continuous-flow processing--a departure from traditional production systems, in which large batches are processed at each step. JPF appointed a "lean team" to reengineer its New Business unit's operations, beginning with the creation of a "model cell"--a fully functioning microcosm of JPF's entire process. This approach allowed managers to experiment and smooth out the kinks while working toward an optimal design. The team applied lean-manufacturing practices, including placing linked processes near one another, balancing employees' workloads, posting performance results, and measuring performance and productivity from the customer's perspective. Customer-focused metrics helped erode the employees' "My work is all that matters" mind-set. The results were so impressive that JPF is rolling out similar systems across many of its operations. To convince employees of the value of lean production, the lean team introduced a simulation in which teams compete to build the best paper airplane based on invented customer specifications. This game drives home lean production's basic principles, establishing a foundation for deep and far-reaching changes in the production system.

  14. Drive for leanness and health-related behavior within a social/cultural perspective.

    Science.gov (United States)

    Tod, David; Edwards, Christian; Hall, Gareth

    2013-09-01

    We examined relationships between drive for leanness and perceived media pressure to change appearance, internalization of an ideal physique, exercise frequency, and dieting. Men and women (N=353) completed the Drive for Leanness Scale, the Sociocultural Attitudes Toward Appearance Questionnaire-3, the Eating Attitudes Test-26, and a demographic inventory. Drive for leanness was significantly correlated with athletic internalization (.52), pressure to attain an ideal physique (.25), exercise frequency (.36), and dieting (.25). Structural equation modeling revealed a good fitting model (χ(2)=2.85, pdrive for leanness, which in turn predicted dieting and exercise. Results reveal social/cultural theory helps enhance the understanding of the drive for leanness and its relationship with health-related behavior. Copyright © 2013 Elsevier Ltd. All rights reserved.

  15. EPA Lean Government Initiative: How to Replicate Lean Successes

    Science.gov (United States)

    This Lean Replication Primer describes how EPA Offices and Regions can identify and adapt successful practices from previous Lean projects to “replicate” their successes and generate further improvements.

  16. The effect of energy restriction on satiation an satiety in obese and lean men

    NARCIS (Netherlands)

    Blom, W.A.M.; Stafleu, A.; Hendriks, H.F.J.

    2004-01-01

    Aims: To investigate how time-blinded obese and lean men compensate for a 3-day energy-restrictive diet. Methods: Subjects were randomly put on a three-day energy-restrictive (ER) (67% energy restriction) and a three-day energy-balanced (EB) diet, with a washout period of one month. Both diets were

  17. Can lean save lives?

    Science.gov (United States)

    Fillingham, David

    2007-01-01

    The purpose of this paper is to show how over the last 18 months Bolton Hospitals NHS Trust have been exploring whether or not lean methodologies, often known as the Toyota Production System, can indeed be applied to healthcare. This paper is a viewpoint. One's early experience is that lean really can save lives. The Toyota Production System is an amazingly successful way of manufacturing cars. It cannot be simply translated unthinkingly into a hospital but lessons can be learned from it and the method can be adapted and developed so that it becomes owned by healthcare staff and focused towards the goal of improved patient care. Working in healthcare is a stressful and difficult thing. Everyone needs a touch of inspiration and encouragement. Applying lean to healthcare in Bolton seems to be achieving just that for those who work there.

  18. Rethinking Lean Service

    Science.gov (United States)

    Seddon, John; O'Donovan, Brendan; Zokaei, Keivan

    Ever since Levitt's influential Harvard Business Review article 'Production-Line Approach to Service' was published in 1972, it has been common for services to be treated like production lines in both the academic literature and more widely in management practice. The belief that achieving economies of scale will reduce unit costs is a common feature of management decision-making. As technological advancement has produced ever more sophisticated IT and telephony, it has become increasingly easier for firms to standardise and off-shore services. The development of the 'lean' literature has only helped to emphasise the same underlying management assumptions: by managing cost and workers' activity, organisational performance is expected to improve. This chapter argues that through misinterpretation of the core paradigm 'lean' has become subsumed into the 'business as usual' of conventional service management. As a result, 'lean' has become synonymous with 'process efficiency' and the opportunity for significant performance improvement - as exemplified by Toyota - has been missed.

  19. Lean Management Genesis

    Directory of Open Access Journals (Sweden)

    Parkes Aneta

    2015-12-01

    Full Text Available Lean Management is a philosophy and management concept, based on reduction of the waste and resources used in the process of producing goods and providing services. Lean Management genesis dates back to scientific management in America (for example concepts of H. Ford and F.W. Taylor and quality management, including development of TQM concept. Japanese Toyota Production System has been inspired by chosen elements of these concepts, and then it evolved towards global concept called Toyota Way (which connects production rules with values and work attitude.

  20. Improving Healthcare through Lean Management

    DEFF Research Database (Denmark)

    Nielsen, Anders Paarup; Edwards, Kasper

    2011-01-01

    The ideas and principles from lean management are now widely being adopted within the healthcare sector. The analysis in this paper shows that organizations within healthcare most often only implement a limited set of tools and methods from the lean tool-box. Departing from a theoretical analysis...... of the well-known and universal lean management principles in the context of the healthcare this paper will attempt to formulate and test four hypotheses about possible barriers to the successful implementation of lean management in healthcare. The first hypothesis states that lean management in healthcare....... The paper concludes by discussing the implications of hypothesis two, three, and four for the successful application of lean management within healthcare. Is it concluded that this requires a transformative and contingent approach to lean management where the universal principles of the lean philosophy...

  1. Lean in Air Permitting Guide

    Science.gov (United States)

    The Lean in Air Permitting Guide is designed to help air program managers at public agencies better understand the potential value and results that can be achieved by applying Lean improvement methods to air permitting processes.

  2. The Lean and Environment Toolkit

    Science.gov (United States)

    This Lean and Environment Toolkit assembles practical experience collected by the U.S. Environmental Protection Agency (EPA) and partner companies and organizations that have experience with coordinating Lean implementation and environmental management.

  3. Lean leadership: an ethnographic study

    NARCIS (Netherlands)

    Aij, K.H.; Visse, M.A.; Widdershoven, G.A.M.

    2015-01-01

    Purpose – The purpose of this study is to provide a critical analysis of contemporary Lean leadership in the context of a healthcare practice. The Lean leadership model supports professionals with a leading rolein implementing Lean.This article presents a case study focusing specifcally on

  4. Lean With a Human Face

    DEFF Research Database (Denmark)

    Hasle, Peter; Jensen, Per Langaa

    2008-01-01

    The consequences for quality of work of lean manufacturing is discussed in the international litterature, and several authors suggest increased work speed, stress, and muscoskeletal diseases as a consequence of lean. The Danish experience with lean has been studied through interviews with managers...

  5. Design thinking & lean

    DEFF Research Database (Denmark)

    Bravos, Cynthia; Adler, Isabel K.

    2015-01-01

    This paper aims at presenting how a Brazilian innovation consultancy guided a collaborative development of a mobile solution using the Design Thinking approach (Vianna et al, 2012) and Lean principles (Ries, 2011). It will describe tools and methods used and how it was applied to requirement gath...

  6. Lean start-up

    DEFF Research Database (Denmark)

    Rasmussen, Erik Stavnsager; Tanev, Stoyan

    2016-01-01

    The risk of launching new products and starting new firms is known to be extremely high. The Lean Start-up approach is a way of reducing these risks and enhancing the chances for success by validating the products and services in the market with customers before launching it in full scale. The ma...... and the final business model. In other words: The start-up must first nail the problem together with the customers, then develop the solution and test, and then in the end scale it to a full-grown business model.......The risk of launching new products and starting new firms is known to be extremely high. The Lean Start-up approach is a way of reducing these risks and enhancing the chances for success by validating the products and services in the market with customers before launching it in full scale. The main...

  7. Green and lean management

    CERN Document Server

    Davim, J

    2017-01-01

    This book focusses on the challenges and changes organizational management faces in an era when the need to develop environmentally aware processes meets high levels of competition. It covers the synergetic effects, how re-use, recycling, waste reduction, and other sustainable production strategies can add value, low costs and time of production. Sustainable business behavior is not only an environmental perspective on management, but more and more contains an organizational perspective. Taking into account these issues, green and lean management appears as the way managers can drive their employees to continuously improve the management processes that add value to the organization and costumers. This book provides information on principles, strategies, models, and applications of green and lean management, and at the same time communicates the latest research activity relating to this scientific field world-wide.

  8. Lean Leadership - Organizational Buy - Ins

    Directory of Open Access Journals (Sweden)

    Dr. Revathi Iyer

    2017-05-01

    Full Text Available Great organizations have become leaders due to their leadership and sustainable initiatives. One such initiative is adoption of lean leadership to align core strategies with all functional areas of business. Leadership is likely to take place in a lean environment because improvements that happen are continual and can only be supported by leadership which understands this important aspect. The topic of lean leadership organizational buy ins speaks on how lean leadership could affect organizations that adopt lean and other quality tools. Purpose of the study This study has been undertaken to understand When leadership more of is likely to take place in lean . Leadership plays a very important role while adopting lean processes and how lean leadership can address the process problem. Application of leadership lenses to lean processes needs great foresight thought and creativity. It has been also observed that lean management and lean processes can happen only if leadership is able to effectively communicate the thought of continual improvement to bring in a lean organization and a future state of processes where everything of a firm process and procedure is continually improving and the best strategies to manage this change becomes a philosophy. Lean leadership is associated with such a change. This enables leadership vision to be clear as it paves the way for current state and is clear to everyone. It is this leadership vision which enables employees to think and act in a way that perpetrates continual improvement. Hence leadership buys ins for lean are very necessary. The purpose of the study is also to understand how leaders can not only use cost reduction but also reducing time-to-market improving service quality and reducing risk exposure by adopting lean methods . it has been also seen that there is overall productivity and efficiency in organizations holistically when leadership endorses lean methodology. Radnor Z. and Bucci G. 2007

  9. Lean leadership: an ethnographic study.

    Science.gov (United States)

    Aij, Kjeld Harald; Visse, Merel; Widdershoven, Guy A M

    2015-01-01

    The purpose of this study is to provide a critical analysis of contemporary Lean leadership in the context of a healthcare practice. The Lean leadership model supports professionals with a leading role in implementing Lean. This article presents a case study focusing specifically on leadership behaviours and issues that were experienced, observed and reported in a Dutch university medical centre. This ethnographic case study provides auto-ethnographic accounts based on experiences, participant observation, interviews and document analysis. Characteristics of Lean leadership were identified to establish an understanding of how to achieve successful Lean transformation. This study emphasizes the importance for Lean leaders to go to the gemba, to see the situation for one's own self, empower health-care employees and be modest. All of these are critical attributes in defining the Lean leadership mindset. In this case study, Lean leadership is specifically related to healthcare, but certain common leadership characteristics are relevant across all fields. This article shows the value of an auto-ethnographic view on management learning for the analysis of Lean leadership. The knowledge acquired through this research is based on the first author's experiences in fulfilling his role as a health-care leader. This may help the reader examining his/her own role and reflecting on what matters most in the field of Lean leadership.

  10. Effect of forage conservation method on ruminal lipid metabolism and microbial ecology in lactating cows fed diets containing a 60:40 forage-to-concentrate ratio.

    Science.gov (United States)

    Halmemies-Beauchet-Filleau, A; Kairenius, P; Ahvenjärvi, S; Crosley, L K; Muetzel, S; Huhtanen, P; Vanhatalo, A; Toivonen, V; Wallace, R J; Shingfield, K J

    2013-04-01

    The effect of forage conservation method on ruminal lipid metabolism and microbial ecology was examined in 2 complementary experiments in cows. Treatments comprised fresh chopped grass, barn-dried hay, or untreated (UTS) or formic acid-treated silage (FAS) prepared from the same grass sward. Preparation of conserved forages coincided with the collection of samples from cows offered fresh grass. In the first experiment, 5 multiparous Finnish Ayrshire cows (229 d in milk) were used to compare the effects of feeding diets based on grass followed by hay during 2 consecutive 14-d periods separated by a 5-d transition during which extensively wilted grass was fed. In the second experiment, 5 multiparous Finnish Ayrshire cows (53 d in milk) were assigned to 1 of 2 blocks and allocated treatments according to a replicated 3×3 Latin square design with 14-d periods to compare the effects of hay, UTS, and FAS. Cows received 7 or 9 kg/d of the same concentrate in experiments 1 and 2, respectively. Conservation of grass by drying, but not ensiling, decreased forage fatty acid content primarily due to losses of 18:2n-6 and 18:3n-3. Compared with grass, feeding hay had no effect on dry matter intake (DMI), rumen pH, or fermentation characteristics, other than increasing ammonia content, but lowered whole-tract organic matter and fiber digestibility (experiment 1). Relative to hay, silage increased DMI, rumen volatile fatty acid (VFA) concentrations, and molar proportions of butyrate, and decreased molar acetate proportions (experiment 2). Compared with UTS, FAS increased DMI, had no effect on rumen ammonia or VFA concentrations, but tended to lower rumen pH and the molar ratio of lipogenic to glucogenic VFA. Conservation method had no substantial effect on ruminal or whole-tract digestibility coefficients. Compared with fresh grass and silages, hay decreased lipolysis and biohydrogenation (BH) of dietary unsaturates in the rumen, resulting in similar flows of 18:2n-6 and 18:3n-3

  11. Organizational change through Lean Thinking.

    Science.gov (United States)

    Tsasis, Peter; Bruce-Barrett, Cindy

    2008-08-01

    In production and manufacturing plants, Lean Thinking has been used to improve processes by eliminating waste and thus enhancing efficiency. In health care, Lean Thinking has emerged as a comprehensive approach towards improving processes embedded in the diagnostic, treatment and care activities of health-care organizations with cost containment results. This paper provides a case study example where Lean Thinking is not only used to improve efficiency and cost containment, but also as an approach to effective organizational change.

  12. Applying lean thinking in construction

    Directory of Open Access Journals (Sweden)

    Remon Fayek Aziz

    2013-12-01

    Full Text Available The productivity of the construction industry worldwide has been declining over the past 40 years. One approach for improving the situation is using lean construction. Lean construction results from the application of a new form of production management to construction. Essential features of lean construction include a clear set of objectives for the delivery process, aimed at maximizing performance for the customer at the project level, concurrent design, construction, and the application of project control throughout the life cycle of the project from design to delivery. An increasing number of construction academics and professionals have been storming the ramparts of conventional construction management in an effort to deliver better value to owners while making real profits. As a result, lean-based tools have emerged and have been successfully applied to simple and complex construction projects. In general, lean construction projects are easier to manage, safer, completed sooner, and cost less and are of better quality. Significant research remains to complete the translation to construction of lean thinking in Egypt. This research will discuss principles, methods, and implementation phases of lean construction showing the waste in construction and how it could be minimized. The Last Planner System technique, which is an important application of the lean construction concepts and methodologies and is more prevalent, proved that it could enhance the construction management practices in various aspects. Also, it is intended to develop methodology for process evaluation and define areas for improvement based on lean approach principles.

  13. Lean software development in action

    CERN Document Server

    Janes, Andrea

    2014-01-01

    This book illustrates how goal-oriented, automated measurement can be used to create Lean organizations and to facilitate the development of Lean software, while also demonstrating the practical implementation of Lean software development by combining tried and trusted tools. In order to be successful, a Lean orientation of software development has to go hand in hand with a company's overall business strategy. To achieve this, two interrelated aspects require special attention: measurement and experience management. In this book, Janes and Succi provide the necessary knowledge to establish "

  14. First Lean, then modularisation

    DEFF Research Database (Denmark)

    Petersen, Kristian R.; Madsen, Erik Skov; Bilberg, Arne

    2016-01-01

    of Europe’s leading offshore wind power operators with more than 1,000 wind turbine generators in operation. By focusing on this company, in-depth insights into its operations and maintenance processes are investigated. Findings – Lean is identified to constitute an important first step before...... and resources can take place. The authors also establish a foundation for the development of a software tool to support the development of the modularisation of maintenance tasks. Originality/value – The present study contributes to the rather immature field of research on the operations and maintenance...

  15. Adipose gene expression response of lean and obese mice to short-term dietary restriction.

    NARCIS (Netherlands)

    Schothorst, Evert M van; Keijer, Jaap; Pennings, Jeroen L A; Opperhuizen, Antoon; Brom, Charissa E van den; Kohl, Thomas; Franssen-van Hal, Nicole L W; Hoebee, Barbara

    2006-01-01

    Overweight and obesity lead to higher morbidity risks, which are alleviated even by mild weight loss. To gain insight in the molecular effects of weight loss in adipose tissue, we analyzed the effects of short-term dietary restriction (DR) on mice fed a low-fat diet (lean mice) or a high-fat diet

  16. Lean approach in knowledge work

    Directory of Open Access Journals (Sweden)

    Hanna Kropsu-Vehkapera

    2018-05-01

    Full Text Available Purpose: Knowledge work productivity is a key area of improvement for many organisations. Lean approach is a sustainable way to achieve operational excellence and can be applied in many areas. The purpose of this novel study is to examine the potential of using lean approach for improving knowledge work practices. Design/methodology/approach: A systematic literature review has been carried out to study how lean approach is realised in knowledge work. The research is conceptual in nature and draws upon earlier research findings. Findings: This study shows that lean studies’ in knowledge work is an emerging research area. This study documents the methods and practices implemented in knowledge work to date, and presents a knowledge work continuum, which is an essential framework for effective lean approach deployment and to frame future research focus in knowledge work productivity. Research limitations/implications: This study structures the concept of knowledge work and outlines a concrete concept derived from earlier literature. The study summarises the literature on lean in knowledge work and highlights, which methods are used. More research is needed to understand how lean can be implemented in complex knowledge work environment and not only on the repetitive knowledge work. The limitations of this research are due to the limited availability of previous research. Practical implications: To analyse the nature of knowledge work, we implicate the areas where lean methods especially apply to improving knowledge work productivity. When applying lean in knowledge work context the focus should be using the people better and improving information flow. Originality/value: This study focuses on adapting lean methods into a knowledge work context and summarises earlier research done in this field. The study discusses the potential to improve knowledge work productivity by implementing lean methods and presents a unique knowledge work continuum to

  17. EDUCATION FOR LEAN & LEAN FOR EDUCATION: A LITERATURE REVIEW

    Directory of Open Access Journals (Sweden)

    Saveta Vukadinovic

    2017-03-01

    Full Text Available The purpose of this paper is to investigate and understand how tools and principles of Lean philosophy can be adopted to improve the effectiveness of engineering education by providing services beyond the competition and costs below the competition, and how engineering education can provide better prepared engineering professionals capable to work in dynamic Lean environments by developing multidisciplinary knowledge and skills. Paper will be based on analysis of relevant scientific and professional literature sources, including certain elements of description, classification, explanation and prediction. The authors will use detailed literature review to explain complex relationship and interdependence between Lean philosophy and engineering education and answer the question what benefits modern Lean enterprises may expect from properly educated and qualified engineers and how application of Lean tools and principles can improve the system of engineering education.

  18. The effects of a protein enriched diet with lean red meat combined with a multi-modal exercise program on muscle and cognitive health and function in older adults: study protocol for a randomised controlled trial.

    Science.gov (United States)

    Daly, Robin M; Gianoudis, Jenny; Prosser, Melissa; Kidgell, Dawson; Ellis, Kathryn A; O'Connell, Stella; Nowson, Caryl A

    2015-08-08

    Age-related muscle wasting has been strongly implicated with falls and fractures in the elderly, but it has also been associated with cognitive decline and dementia. Progressive resistance training (PRT) and adequate dietary protein are recognised as important contributors to the maintenance of muscle health and function in older adults. However, both factors also have the potential to improve brain function and prevent cognitive decline via several pathways, including the regulation of various growth and neurotrophic factors [insulin-like growth factor-1 (IGF-1)]; brain-derived growth factor (BDNF)] and/or the modulation of systemic inflammation. The primary aim of this study is to investigate whether a modest increase in dietary protein achieved through the consumption of lean red meat three days per week, when combined with PRT, can enhance muscle mass, size and strength and cognitive function in community-dwelling older people. The study design is a 48-week randomised controlled trial consisting of a 24-week intervention with a 24-week follow-up. Men and women (n=152) aged 65 years and over residing in the community will be randomly allocated to: 1) PRT and provided with 220 g (raw weight) of lean red meat to be cooked and divided into two 80 g servings on each of the three days that they complete their exercise session, or 2) control PRT in which participants will be provided with and advised to consume ≥1 serving (~1/2 cup) of rice and/or pasta or 1 medium potato on each of the three training days. The primary outcome measures will be muscle mass, size and strength and cognitive function. Secondary outcomes will include changes in: muscle function, neural health (corticospinal excitability and inhibition and voluntary activation), serum IGF-1 and BDNF, adipokines and inflammatory markers, fat mass and inter-/intra-muscular fat, blood pressure, lipids and health-related quality of life. All outcome measures will be assessed at baseline and 24 weeks, with the

  19. Ares Launch Vehicles Lean Practices Case Study

    Science.gov (United States)

    Doreswamy, Rajiv, N.; Self, Timothy A.

    2008-01-01

    This viewgraph presentation describes test strategies and lean philisophies and practices that are applied to Ares Launch Vehicles. The topics include: 1) Testing strategy; 2) Lean Practices in Ares I-X; 3) Lean Practices Applied to Ares I-X Schedule; 4) Lean Event Results; 5) Lean, Six Sigma, and Kaizen Practices in the Ares Projects Office; 6) Lean and Kaizen Success Stories; and 7) Ares Six Sigma Practices.

  20. Food safety in scavenger conservation: Diet-associated exposure to livestock pharmaceuticals and opportunist mycoses in threatened Cinereous and Egyptian vultures.

    Science.gov (United States)

    Blanco, Guillermo; Junza, Alexandra; Barrón, Dolores

    2017-01-01

    Pharmaceuticals from veterinary treatments may enter terrestrial food webs when medicated livestock are available to wildlife in supplementary feeding stations aimed at the conservation of endangered scavengers. Here, we hypothesized that the exposure risk to livestock fluoroquinolones, as indicators of pharmaceutical burden in food, is related to the variable reliance of scavengers on domestic versus wild animal carcasses. Since the misuse of broad-spectrum antibiotics is a major predisposing factor for opportunistic mycoses, we evaluated disease signs potentially associated with diet-dependent drug exposure in nestlings of two threatened vultures. A greater occurrence (100%, n=14) and concentration of fluoroquinolones (mean±SD=73.0±27.5µgL -1 , range=33.2-132.7), mostly enrofloxacin, were found in Cinereous vultures, Aegypius monachus, due to their greater dependence on livestock carcasses than Egyptian vultures, Neophron percnopterus (fluoroquinolones occurrence: 44%, n=16, concentration: 37.9±16.6µgL -1 , range=11.5-55.9), which rely much more on carcasses of wild animals (42% of remains vs. 23% in the cinereous vulture). The chaotic, chronic and pulsed ingestion of these drugs throughout nestling development is proposed as one of the most plausible explanations for the high occurrence and intensity of oral Candida-like lesions in nestling vultures. The high occurrence of fluoroquinolone residues and disease hindered the probing of a cause-effect relationship between both factors in individual vultures. This relationship could be evaluated through a population-based approach by sampling vultures not exposed to these drugs. The high dependence of vultures on domestic animals today compared to past decades and the growing intensification of livestock farming, imply an expected increase in the impact of pharmaceuticals on scavenger populations. This requires further evaluation due to potential consequences in biodiversity conservation and environmental health

  1. LEAN thinking in Finnish healthcare.

    Science.gov (United States)

    Jorma, Tapani; Tiirinki, Hanna; Bloigu, Risto; Turkki, Leena

    2016-01-01

    Purpose - The purpose of this study is to evaluate how LEAN thinking is used as a management and development tool in the Finnish public healthcare system and what kind of outcomes have been achieved or expected by using it. The main focus is in managing and developing patient and treatment processes. Design/methodology/approach - A mixed-method approach incorporating the Webropol survey was used. Findings - LEAN is quite a new concept in Finnish public healthcare. It is mainly used as a development tool to seek financial savings and to improve the efficiency of patient processes, but has not yet been deeply implemented. However, the experiences from LEAN initiatives have been positive, and the methodology is already quite well-known. It can be concluded that, because of positive experiences from LEAN, the environment in Finnish healthcare is ready for the deeper implementation of LEAN. Originality/value - This paper evaluates the usage of LEAN thinking for the first time in the public healthcare system of Finland as a development tool and a management system. It highlights the implementation and achieved results of LEAN thinking when used in the healthcare environment. It also highlights the expectations for LEAN thinking in Finnish public healthcare.

  2. Lean management beyond manufacturing a holistic approach

    CERN Document Server

    Bhasin, Sanjay

    2015-01-01

    Exploring Lean manufacturing in a holistic manner, this book helps organizations to implement Lean principles successfully by offering theoretical, empirical and practical knowledge. It empirically demonstrates how a successful Lean initiative can improve organizational efficiency, and incorporates valuable primary research to substantiate findings. It argues that Lean principles need to be applied throughout the value chain in order to be successful , and suggests that these tools need to be aligned with culture and change management. Chapters examine issues including Lean cultures, impediments to Lean, Lean and performance measurement, and the impact of Lean. Viewing Lean as a never-ending journey, this book provides a valuable resource to practising Lean managers, and specialist researchers and students, and also offers an important reference for organizations embarking on their Lean voyage.

  3. Lean Startup and Lean Canvas Using for Innovative Product Development

    Directory of Open Access Journals (Sweden)

    Alena Buchalcevová

    2016-06-01

    Full Text Available Recently, new approaches to product development have emerged that focus on idea generation techniques and customer itself. One of them is the Lean Startup method that is described in this article along with the Lean Canvas method. The main goal of the article is to demonstrate the application of both methods to an innovative product development focused on providing interactive trips for families with children. The development of the product during individual phases is described and application of the Lean Startup and Lean Canvas principles is demonstrated. Finally, benefits of both methods contributing to the product success are discussed. Similar case studies start emerging worldwide, however in the Czech context are quite rare.

  4. Clinically lean; "cutting the crap".

    Science.gov (United States)

    Caldwell, G

    2012-01-01

    Proponents of Lean Philosophy believe that successful businesses must reduce waste in working time and resources to a minimum, and maximise their use in productive work. The productive work of the Acute Medical Unit is to provide effective clinical management to a daily cohort of acutely ill patients. Many Clinicians are cynical about Lean. In this article, Dr Caldwell discusses how many clinicians complain of too much crap in the workplace, which gets in the way of swift, safe high quality clinical care. He argues that "Cutting the Crap" in the Acute Medical Unit is entirely consistent with Lean approaches to management of complex systems.

  5. Improving healthcare using Lean processes.

    Science.gov (United States)

    Baker, G Ross

    2014-01-01

    For more than a decade, healthcare organizations across Canada have been using Lean management tools to improve care processes, reduce preventable adverse events, increase patient satisfaction and create better work environments. The largest system-wide effort in Canada, and perhaps anywhere, is currently under way in Saskatchewan. The jury is still out on whether Lean efforts in that province, or elsewhere in Canada, are robust enough to transform current delivery systems and sustain new levels of performance. This issue of Healthcare Quarterly features several articles that provide a perspective on Lean methods in healthcare. Copyright © 2014 Longwoods Publishing.

  6. Göttingen minipig model of diet-induced atherosclerosis: influence of mild streptozotocin-induced diabetes on lesion severity and markers of inflammation evaluated in obese, obese and diabetic, and lean control animals

    DEFF Research Database (Denmark)

    Ludvigsen, Trine Pagh; Kirk, Rikke Kaae; Christoffersen, Berit Østergaard

    2015-01-01

    in human patients, inclusion of this disease aspect in the characterization of a such model, is highly relevant. The objective of this study was to evaluate the effect of mild streptozotocin-induced diabetes on ex- and in vivo end-points in a diet-induced atherosclerotic minipig model. Castrated male...... Göttingen minipigs were fed standard chow (CD), atherogenic diet alone (HFD) or with superimposed mild streptozotocin-induced diabetes (HFD-D). Circulating markers of inflammation (C-reactive protein (CRP), oxidized low-density lipoprotein (oxLDL), plasminogen activator inhibitor-1, lipid and glucose......From a pharmacological perspective, readily-available, well-characterized animal models of cardiovascular disease, including relevant in vivo markers of atherosclerosis are important for evaluation of novel drug candidates. Furthermore, considering the impact of diabetes mellitus on atherosclerosis...

  7. Lean Manufacturing measurement: The relationships between Lean activities and Lean metrics

    Directory of Open Access Journals (Sweden)

    Diego Fernando Manotas Duque

    2007-01-01

    Full Text Available Medición en Lean Manufacturing: Relaciones entre Actividades Lean y Métricas Lean Lean Manufacturing fue desarrollada por Toyota para satisfacer sus necesidades específicas en un mercado restringido y en tiempos de estrechez económica. Estos conceptos han sido estudiados y se ha comprobado su aplicabilidad en una amplia variedad de industrias. El objetivo de este artículo es el de integrar un conjunto de métricas que han sido propuestas por diferentes autores, de tal manera que sean consistentes con las etapas y elementos de implementaciones de Lean Manufacturing. Para lograrlo se presentan dos marcos de referencia para implementaciones Lean y los principales factores de éxito se utilizan como base para proponer métricas que identifiquen el avance en estos factores. Posteriormente se propone una tabla que cruza el impacto de las “Actividades Lean” sobre las métricas, postulando que muchos de los supuestos a priori sobre estos impactos deberían ser precisos. Finalmente se proponen algunas ideas para proyectos de investigación hacia el futuro y posibles extensiones de las aplicaciones propuestas aquí.

  8. Faecal microbiota in lean and obese dogs.

    Science.gov (United States)

    Handl, Stefanie; German, Alexander J; Holden, Shelley L; Dowd, Scot E; Steiner, Jörg M; Heilmann, Romy M; Grant, Ryan W; Swanson, Kelly S; Suchodolski, Jan S

    2013-05-01

    Previous work has shown obesity to be associated with changes in intestinal microbiota. While obesity is common in dogs, limited information is available about the role of the intestinal microbiota. The aim of this study was to investigate whether alterations in the intestinal microbiota may be associated with canine obesity. Using 16S rRNA gene pyrosequencing and quantitative real-time PCR, we evaluated the composition of the faecal microbiota in 22 lean and 21 obese pet dogs, as well as in five research dogs fed ad libitum and four research dogs serving as lean controls. Firmicutes, Fusobacteria and Actinobacteria were the predominant bacterial phyla. The phylum Actinobacteria and the genus Roseburia were significantly more abundant in the obese pet dogs. The order Clostridiales significantly increased under ad libitum feeding in the research dogs. Canine intestinal microbiota is highly diverse and shows considerable interindividual variation. In the pet dogs, influence on the intestinal microbiota besides body condition, like age, breed, diet or lifestyle, might have masked the effect of obesity. The study population of research dogs was small, and further work is required before the role of the intestinal microbiota in canine obesity is clarified. © 2013 Federation of European Microbiological Societies. Published by Blackwell Publishing Ltd. All rights reserved.

  9. Researching Lean: Methodological Implications of Loose Definitions

    Directory of Open Access Journals (Sweden)

    Mikael Brännmark

    2012-12-01

    Full Text Available Recently, Lean Production (Lean has become a prevailing management concept in Sweden. However, previous research seems to show that the Lean concept and the impact of Lean vary considerably between organizations. This paper illustrates some key methodological issues that need to be considered when researching loosely defined management concepts such as Lean. The paper is based on a review of the literature and five comparative Swedish cases studies. Our study indicates that Lean has changed over time and that operationalization and interpretations of the concept vary considerably. This study concludes that future Lean studies should include a thorough assessment of the Lean interventions, study settings, and in particular non-Lean factors mediating the outcomes of Lean-inspired change programs.

  10. Lean Design and Management for Manufactoring

    OpenAIRE

    NIU, Zhanwen

    2009-01-01

    Most enterprises inducting lean production were confined by the innate limitations of existing production systems, which make it difficult to fulfill lean production comprehensively. To solve this problem, the theory of lean design and management for the manufacturing enterprise lifecycle was proposed. First, the necessities of lean design were analyzed and its theoretical system was established; second, the principles, process, methods and tools for lean design was introduced. Techniques and...

  11. The evolution of Lean organizations

    OpenAIRE

    Serafinas, Dalius; Ruželė, Darius

    2014-01-01

    Remiantis evoliucijos tyrimų modeliais bei autorių sudarytu evoliucionuojančios organizacijos modeliu,straipsnyje analizuojama Lean vadybos metodologija ir tiriama, kaip evoliucionuoja ją įgyvendinančios Lietuvosgamybinės organizacijos. The purpose of this paper is to examine the evolution of Lean organizations.Design/methodology/approach: a conceptual literature on the evolution of species, organisms and organizations was reviewed and an original model (framework) of the evolution of orga...

  12. Buildings Lean Maintenance Implementation Model

    Science.gov (United States)

    Abreu, Antonio; Calado, João; Requeijo, José

    2016-11-01

    Nowadays, companies in global markets have to achieve high levels of performance and competitiveness to stay "alive".Within this assumption, the building maintenance cannot be done in a casual and improvised way due to the costs related. Starting with some discussion about lean management and building maintenance, this paper introduces a model to support the Lean Building Maintenance (LBM) approach. Finally based on a real case study from a Portuguese company, the benefits, challenges and difficulties are presented and discussed.

  13. Lean Transformation of Multinational Concerns

    DEFF Research Database (Denmark)

    Matthiesen, Rikke Vestergaard; Johansen, John

    2008-01-01

    triggered. This paper reports on exploratory studies from a multinational company adopting centrally managed pilot projects as a transformation mechanism for continuous change towards a lean business system and an organizational culture of continuous improvements (CI). Competitive pressure demands...... from a multinational company adopting centrally managed pilot projects as a transformation mechanism for continuous change towards a lean business system and an organizational culture of continuous improvements (CI)....

  14. Lean manufacturing measurement: the relationship between lean activities and lean metrics

    Directory of Open Access Journals (Sweden)

    Manotas Duque Diego Fernando

    2007-10-01

    Full Text Available Lean Manufacturing was developed by Toyota Motor company to address their specific needs in a restricted market in times of economic trouble. These concepts have been studied and proven to be transferrable and applicable to a wide variety of industries. This paper aims to integrate a set of metrics that have been proposed by different authors in such a way that they are consistent with the different stages and elements of Lean Manufacturing implementations. To achieve this, two frameworks for Lean implementations are presented and then the main factors for success are used as the basis to propose metrics that measure the advance in these factors. A tabular display of the impact of “Lean activities” on the metrics is presented, proposing that many a priori assumptions about the benefits on many different levels of improvement should be accurate. Finally, some ideas for future research and extension of the applications proposed on this paper are presented as closing points.

  15. Lean versus Quick Response Manufacturing og andre koncepter - er Lean den eneste ene?

    DEFF Research Database (Denmark)

    Michelsen, Aage U

    2005-01-01

    Begrebet Lean har gennem de senere år vundet en enorm udbredelse. Antallet af publikationer om Lean har været eksplosivt stigende, og mange virksomheder har gennemført eller gennemfører Lean-projekter. Er Lean et nyt koncept? Er Lean den eneste løsning? Kan Lean kombineres med tankegange og princ...... løsning af en anden produktionsopgave. I fjerde afsnit skitseres kort relationerne mellem Lean og to andre begreber, Six Sigma og TPM, der begge har samme mål som Lean, men forskellige udgangspunkter og forskellige indfaldsvinkler....

  16. Lean Production Applications in a Manufacturing Company

    OpenAIRE

    Ali Görener; Humeyra Baser; Ali Turkyilmaz

    2013-01-01

    Lean production is a production model which comes about the pursuit of companies to be able to meet competition and make effective production. The main purpose of lean production is to get control about the wastage. This study includes the requirements for the success of the lean production and how the lean production system can be established. In this paper, lean production techniques were applied to the electric water heater line. Measurements using lean initiatives were made, operation cyc...

  17. Effects of Eating Fresh Lean Pork on Cardiometabolic Health Parameters

    Directory of Open Access Journals (Sweden)

    Peter R. C. Howe

    2012-07-01

    Full Text Available High protein meat-based diets are commonly promoted for weight loss, supposedly by increasing satiety and energy expenditure. Pork is a good source of protein however little information on the metabolic effects of pork consumption exists. This pilot study aimed to examine whether regular consumption of fresh lean pork could improve body composition and cardiovascular risk factors in a 6 month parallel intervention trial. 164 overweight adults (mean BMI 32 were randomly assigned to incorporate up to 1 kg pork/week by substituting for other foods or maintain their habitual diet (control. Plasma levels of lipids, glucose and insulin, BMI, waist/hip circumference, blood pressure, heart rate and arterial compliance were measured at baseline and 3 and 6 months. Body composition was determined using dual energy X-ray absorptiometry. A total of 144 volunteers completed and volunteers in the pork group increased their intake 10 fold by substituting pork for mainly beef and chicken. After 3 months, there were significant (p ≤ 0.01 reductions in weight, BMI, waist circumference, % body fat, fat mass and abdominal fat in the pork group relative to controls, which persisted for 6 months. There was no change in lean mass, indicating that the reduction in weight was due to loss of fat mass. There were no significant effects on other metabolic parameters. Regular consumption of lean fresh pork may improve body composition.

  18. Lean computing for the cloud

    CERN Document Server

    Bauer, Eric

    2016-01-01

    Applies lean manufacturing principles across the cloud service delivery chain to enable application and infrastructure service providers to sustainably achieve the shortest lead time, best quality, and value This book focuses on lean in the context of cloud computing capacity management of applications and the physical and virtual cloud resources that support them. Lean Computing for the Cloud considers business, architectural and operational aspects of efficiently delivering valuable services to end users via cloud-based applications hosted on shared cloud infrastructure. The work also focuses on overall optimization of the service delivery chain to enable both application service and infrastructure service providers to adopt leaner, demand driven operations to serve end users more efficiently. The book’s early chapters analyze how capacity management morphs with cloud computing into interlocked physical infrastructure capacity management, virtual resou ce capacity management, and application capacity ma...

  19. Lean management in academic surgery.

    Science.gov (United States)

    Collar, Ryan M; Shuman, Andrew G; Feiner, Sandra; McGonegal, Amy K; Heidel, Natalie; Duck, Mary; McLean, Scott A; Billi, John E; Healy, David W; Bradford, Carol R

    2012-06-01

    Lean is a management system designed to enhance productivity by eliminating waste. Surgical practice offers many opportunities for improving efficiency. Our objective was to determine whether systematic implementation of lean thinking in an academic otolaryngology operating room improves efficiency and profitability and preserves team morale and educational opportunities. In an 18-month prospective quasi-experimental study, a multidisciplinary task force systematically implemented lean thinking within an otolaryngology operating room of an academic health system. Operating room turnover time and turnaround time were measured during a baseline period; an observer-effect period in which workers were made aware that their efficiency was being measured but before implementing lean changes; and an intervention period after redesign principles had been used. The impact on teamwork, morale, and surgical resident education were measured during the baseline and intervention periods through validated surveys. A profit model was applied to estimate the financial implications of the study. There was no difference between the baseline and observer-effect periods of the study for turnover time (p = 0.98) or turnaround time (p = 0.20). During the intervention period, the mean turnover time and turnaround time were significantly shorter than during the baseline period (29 vs 38 minutes; p improved morale after implementation (p = 0.011). Educational metrics were unchanged before and after implementation. The annual opportunity revenue for the involved operating room is $330,000; when extrapolated throughout the operating rooms, lean thinking could create 6,500 hours of capacity annually. Application of lean management techniques to a single operating room and surgical service improved operating room efficiency and morale, sustained resident education, and can provide considerable financial gains when scaled to an entire academic surgical suite. Copyright © 2012. Published by

  20. Lean spare parts delivery chain

    OpenAIRE

    Sjöstrand, Niklas; Larsson, Mona-Liza

    2015-01-01

    AbstractWhen a product has been sold to a customer a new market arises for the company to earn profit from and to differentiate itself within. According to Bartwal, et al. (2010) the after sales market generally does not provide great revenues but good profits of the total revenue. In order to gain competiveness and live up to customer’s expectations a company needs to be efficient (Atkinson, 2004). He continuous that this can be accomplished if companies implement Lean. Lean is different too...

  1. 'Lean' approach gives greater efficiency.

    Science.gov (United States)

    Call, Roger

    2014-02-01

    Adapting the 'Lean' methodologies used for many years by many manufacturers on the production line - such as in the automotive industry - and deploying them in healthcare 'spaces' can, Roger Call, an architect at Herman Miller Healthcare in the US, argues, 'easily remedy many of the inefficiencies' found within a healthcare facility. In an article that first appeared in the September 2013 issue of The Australian Hospital Engineer, he explains how 'Lean' approaches such as the 'Toyota production system', and 'Six Sigma', can be harnessed to good effect in the healthcare sphere.

  2. Insulin binding and glucose transport in adipocytes of acarbose-treated Zucker lean and obese rats.

    Science.gov (United States)

    Vasselli, J R; Flory, T; Fried, S K

    1987-01-01

    The intestinal glucosidase inhibitor acarbose was administered as a dietary admix (30 mg/100 g chow diet) to male Zucker obese and lean rats. After 15 weeks, epidiymal fat pads were removed and adipocytes isolated by collagenase digestion. Equilibrium binding of A-14 tyrosine 125I-insulin, and transport of U-14C-glucose was determined was adipocytes incubated for 50 min at 37 degrees C in 0-16000 pM insulin. Insulin binding/cell was enhanced two-fold in lean (P less than 0.01) and obese (n.s.) drug groups. In drug-treated leans, increased sensitivity of glucose transport to submaximally stimulating concentrations of insulin was observed (P less than 0.02). For both genotypes, acarbose mildly decreased insulin levels and body weight gain, although adipocyte size was unaffected. Results indicate that enhanced insulin binding accompanies metabolic improvements induced by acarbose in lean Zucker rats.

  3. A Simulation of Lean Manufacturing: The Lean Lemonade Tycoon 2

    Science.gov (United States)

    Ncube, Lisa B.

    2010-01-01

    This article discusses the functions and effectiveness of games and simulations in the learning processes, in particular as an experiential learning methodology. The application of the game Lemonade Tycoon in the development of lean manufacturing concepts is described. This article addresses the use of the game to teach the principles of lean…

  4. Learning Lean: A Survey of Industry Lean Needs

    Science.gov (United States)

    Fliedner, Gene; Mathieson, Kieran

    2009-01-01

    The authors examined business practitioners' preferences for higher education curricula design in general and for what graduates should know about Lean, or waste-reduction efforts. The authors conducted a Web-based survey and found that practitioners are not as concerned about graduates' possessing specific technical skills as they are about them…

  5. Lean Application to Manufacturing Ramp-Up

    DEFF Research Database (Denmark)

    Christensen, Irene; Rymaszewska, Anna

    2016-01-01

    . Abstracting from the extant literature, the authors considered the competitiveness of manufacturing companies from two principal perspectives: the leanness of the ramp-up process and the new-value creation of quality managers. While much of the literature fails to acknowledge that the roots of lean actually......This article provides a theoretical overview of the concepts of lean and manufacturing ramp-up in an attempt to conceptualize the strategic areas in which lean philosophy and principles can be applied for continuous improvements. The application of lean principles during the final stage of a new...... product development process, that is, the ramp-up process, is a critical, early enabler of lean manufacturing. The manufacturing strategy literature conceptualizes a state of “leanness in operations,” which can consolidate both the concepts of lean and manufacturing ramp-up, providing a dual perspective...

  6. A Sand Cone Model of Lean Implementation

    OpenAIRE

    Yestemessov, Azamat

    2011-01-01

    Over the past 20 years Lean Production system has been a focus of researches by different academicians. A numerous works have been written in the field of Lean implementation in manufacturing companies. However, as shown, most of the academic topics relate to the issues of implementing Lean tools and techniques. Critical Success Factors have been also described widely; however, no efforts in systematization have been made. Only several works have a focus on integration of Lean implementation ...

  7. Performance Improvement through Implementation of Lean Maintenance

    OpenAIRE

    S. Kolanjiappan; Dr. K. Maran

    2011-01-01

    Lean Maintenance is a relatively new term, invented in the last decade of the twentieth century, but the principles are well established in Total Productive Maintenance (TPM). Lean Maintenance—taking its lead from Lean Manufacturing—applies some new techniques to TPM concepts to render a more structured implementation path. Tracing its roots back to Henry Ford with modern refinements born in Japanese manufacturing, specifically the Toyota Production System (TPS). Lean seeks to eliminate a...

  8. Training for successful lean manufacturing implementation

    OpenAIRE

    Ichimura, Maki; Jahankhani, Hamid; Arunachalam, Subramaniam

    2006-01-01

    Implementing lean manufacturing is a complex and everlasting task. The workers involving in production processes are the pivot of the lean manufacturing implementation. Training is known as a vehicle to assist the implementation process. Despite awareness of the training importance, so far, a little is available to assist to organise an efficient training. This paper summarises the overview of lean manufacturing and discuss the importance of human resource within lean implementation process. ...

  9. Lean and psychosocial work environment in manufacturing

    DEFF Research Database (Denmark)

    Edwards, Kasper; Thye, Nina; Nielsen, Anders P.

    2011-01-01

    Lean is currently the rationalization method of choice in the Danish manufacturing industry. This paper reports finding from three lean implementation cases. All cases are manufacturing companies focusing on upmarket products produced in small series. Prior to lean production was organized as sel...

  10. Lean - set i et historisk perspektiv

    DEFF Research Database (Denmark)

    Michelsen, Aage U

    2006-01-01

    I kapitlet redegøres for, hvordan begrebet Lean opstod som en karakteristik af Toyota Production System (TPS), der igen har sin rod i scientific management. Gennem eksempler illustreres det, at centrale Lean-principper således har været anvendt i årtier. Der argumenteres for, at Lean i mange...

  11. Lean Six Sigma in financial services

    NARCIS (Netherlands)

    de Koning, H.; Does, R.J.M.M.; Bisgaard, S.

    2008-01-01

    Lean Thinking and Six Sigma are typically considered as separate approaches to process innovation, with complementary strengths. When combined as Lean Six Sigma, this approach provides a unified framework for systematically developing innovations. Lean Six Sigma can also bring about significant

  12. Change management in lean enterprise

    Directory of Open Access Journals (Sweden)

    Furman Joanna

    2016-06-01

    Full Text Available The main purpose of the paper is the analysis of a process of change focusing particularly on the concept of slimmed production (Lean and its implementation in the enterprise. A case study method was chosen as a research tool because it offers wide array of techniques and means of gaining and analysing data.

  13. Bland diet

    Science.gov (United States)

    ... bland diet; Nausea - bland diet; Diarrhea - bland diet; Peptic ulcer - bland diet ... be used alongside lifestyle changes to help treat ulcers, heartburn, ... stomach or intestinal surgery. A bland diet includes foods ...

  14. Analysis Of Lean Accounting JIT And Balance Scorecard In The Companys Lean Manufacturing

    OpenAIRE

    Irwan Sutirman Wahdiat

    2015-01-01

    This research purpose to analyze the concept of Lean Manufacturing which is influenced by the role of JIT. This research uses a theoretical approach. This study portrait thinking companies that have yet to implement lean manufacturing and after doing the concept of lean manufacturing. This study shows that the concept of lean manufacturing can make the company more efficient and effective. This paper shows some lean manufacturing dimensions of the researchers previous researchers. This study ...

  15. Comparative Analysis between Lean, Six Sigma and Lean Six Sigma Concepts

    OpenAIRE

    Alexandra Mirela Cristina MUNTEANU

    2017-01-01

    This paper analyzes the benefits of Lean Six Sigma in comparison with Lean and Six Sigma, traditional improvement methodologies. The introduction highlights the appearance of Lean Six Sigma, early 2000s, as well as the benefits brought by the integrated approach. The following parts of the study emphasize the main differences between methodologies and their commonalities based on their synergy. Finally the advantages of Lean Six Sigma versus Lean and Six Sigma are analyzed and systematized by...

  16. Impact of prolonged leucine supplementation on protein synthesis and lean growth in neonatal pigs

    Science.gov (United States)

    Most low-birth weight infants experience extrauterine growth failure due to reduced nutrient intake as a result of feeding intolerance. The objective of this study was to determine whether prolonged enteral leucine supplementation improves lean growth in neonatal pigs fed a restricted protein diet. ...

  17. “Fish, chicken, lean meat and eggs can be eaten daily”: A food ...

    African Journals Online (AJOL)

    Adding a small amount of these food products to a plant-based diet can yield considerable improvements in human health. For a variety of reasons, some people choose not to eat meat, but as there is no evidence that a moderate intake of fish, chicken, lean meat and eggs has a negative effect on health, there is no ...

  18. Exploiting HRM in support of lean manufacturing

    DEFF Research Database (Denmark)

    Jørgensen, Frances; Matthiesen, Rikke

    The purpose of this paper is to investigate the ways in HRM practices are-and could potentially be-exploited to support lean manufacturing in practice. First, a review of the pertinent literature regarding HRM, SHRM, and lean manufacturing is presented to provide an understanding of the mechanisms...... by which HRM practices could, theoretically, be used to support a lean implementation. Data presented in the paper are derived from 1) a longitudinal case study on lean implementation and 2) from managers currently involved with lean manufacturing in a second company. The relevant literature and the data...... depicting the potential role in supporting HRM/lean integrated practices. The analysis of the model with respect to the theoretical background emphasizes a number of areas in which HRM could be more fully exploited in order to more successfully support lean implementation, for example, by stressing HRM...

  19. Lean manufacturing in Indian context: A survey

    Directory of Open Access Journals (Sweden)

    Rakesh Kumar

    2015-04-01

    Full Text Available This paper is an attempt to examine the implementation of Lean Manufacturing system in the Indian industries. Predominant elements of Lean Manufacturing, benefits gained after its implementation and obstacles observed by Indian Industry have been recognized. The results of this survey support the opinion that Lean Manufacturing had potential to improve the organizational performance of Indian industries. Nevertheless, Indian industries are required to be passionate to transform their manufacturing by adopting Lean manufacturing to gain the full benefits. A large numbers of literature papers are available on the better side of Lean manufacturing approach and its benefits gained by manufacturing organizations after implementation. But the adverse impacts of Lean manufacturing are not discussed to a great extent. Some drawbacks of Lean manufacturing are also highlighted in this paper.

  20. Lean Production Applications in a Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Ali Görener

    2016-01-01

    Full Text Available Lean production is a production model which comes about the pursuit of companies to be able to meet competition and make effective production. The main purpose of lean production is to get control about the wastage. This study includes the requirements for the success of the lean production and how the lean production system can be established. In this paper, lean production techniques were applied to the electric water heater line. Measurements using lean initiatives were made, operation cycle times were determined, and Kaizen improvement methods and line balancing methods were applied according to the results. And the last section of study showed conclusion of lean implementation.

  1. Dietary B vitamin needs of strains of pigs with high and moderate lean growth.

    Science.gov (United States)

    Stahly, T S; Williams, N H; Lutz, T R; Ewan, R C; Swenson, S G

    2007-01-01

    Ten sets of 5 littermate pigs from each of 2 genetic strains were utilized to determine the impact of the dietary concentration of 5 B vitamins (riboflavin, niacin, pantothenic acid, cobalamin, and folacin) on growth from 9 to 28 kg of BW in pigs with high or moderate capacity for lean growth. All pigs (penned individually) were reared via a segregated, early weaning scheme, so that the lean growth potential of each strain could be expressed. The basal diet provided the 5 test vitamins at concentrations of total and estimated bioavailability equivalent to a minimum of 100 and 70%, respectively, of their estimated requirements (NRC, 1998) for 5- to 10-kg pigs. At a BW of 9 +/- 0.9 kg, pigs within each litter were allotted to the basal diet supplemented with sources of the 5 test vitamins equivalent to an additional 0, 100, 200, 300, or 400% (bioavailable) of the NRC requirements. Pigs from the high lean strain consumed less feed (P vitamin concentrations were increased. However, the dietary B vitamin concentrations needed to optimize G:F were greater (P 470% of NRC, 1998) vs. moderate (270%) lean strain. Based on these data, the dietary needs for 1 or more of the 5 B vitamins are greater than current NRC (1998) estimates, particularly in pigs expressing a high rate of lean tissue growth. The greater need for these vitamins is not associated with greater dietary energy intake or body energy accretion rate but is potentially due to shifts in the predominant metabolic pathways.

  2. Leaning in to "muddy" interviews

    DEFF Research Database (Denmark)

    Lippke, Lena; Tanggaard, Lene

    2014-01-01

    Over the last few decades, qualitative research has been acknowledged as a peopled practice in which subjectivities come into play. The main argument presented in this article is that qualitative research involves “muddy,” troublesome, interactional passages, because of a complex interplay between...... situated identities among the participants cross each other. We emphasize the value of daring to lean in to the muddiness of peopled research, use it as an analytical tool and present it in its imperfect form. This approach contributes to transparency in qualitative research, opens up the data in a new way...... subjectivities, situated identities, emotions, and conversational genres. Based on ethnographic fieldwork at a Danish Vocational Educational Training College, we introduce the concept of “leaning in” to provide an analytical grasp of the “muddy” interactional tension field in an interview situation, in which...

  3. Lean six sigma in healthcare.

    Science.gov (United States)

    de Koning, Henk; Verver, John P S; van den Heuvel, Jaap; Bisgaard, Soren; Does, Ronald J M M

    2006-01-01

    Healthcare, as with any other service operation, requires systematic innovation efforts to remain competitive, cost efficient, and up-to-date. This article outlines a methodology and presents examples to illustrate how principles of Lean Thinking and Six Sigma can be combined to provide an effective framework for producing systematic innovation efforts in healthcare. Controlling healthcare cost increases, improving quality, and providing better healthcare are some of the benefits of this approach.

  4. Comparative Analysis between Lean, Six Sigma and Lean Six Sigma Concepts

    Directory of Open Access Journals (Sweden)

    Alexandra Mirela Cristina MUNTEANU

    2017-06-01

    Full Text Available This paper analyzes the benefits of Lean Six Sigma in comparison with Lean and Six Sigma, traditional improvement methodologies. The introduction highlights the appearance of Lean Six Sigma, early 2000s, as well as the benefits brought by the integrated approach. The following parts of the study emphasize the main differences between methodologies and their commonalities based on their synergy. Finally the advantages of Lean Six Sigma versus Lean and Six Sigma are analyzed and systematized by author in order to reveal Lean Six Sigma’s benefits.

  5. Influence of diet, exercise and serum vitamin D on sarcopenia in post-menopausal women

    Science.gov (United States)

    Mason, Caitlin; Xiao, Liren; Imayama, Ikuyo; Duggan, Catherine R.; Foster-Schubert, Karen E.; Kong, Angela; Campbell, Kristin L.; Wang, Ching-Yun; Villasenor, Adriana; Neuhouser, Marian L.; Alfano, Catherine M.; Blackburn, George L.; McTiernan, Anne

    2012-01-01

    Purpose To investigate the effects of 12 months of dietary weight loss and/or aerobic exercise on lean mass and the measurements defining sarcopenia in postmenopausal women, and to examine the potential moderating effect of serum 25-hydroxyvitamin D (25(OH)D) and age. Methods 439 overweight and obese postmenopausal women were randomized to: diet modification (N=118); exercise (N=117), diet+exercise (N=117), or control (N=87). The diet intervention was a group-based program with a 10% weight loss goal. The exercise intervention was 45 mins/day, 5 days/week of moderate-to-vigorous intensity aerobic activity. Total and appendicular lean mass were quantified by dual Xray absorptiometry (DXA) at baseline and 12 months. A skeletal muscle index (SMI=appendicular lean mass (kg)/m2) and the prevalence of sarcopenia (SMIlean mass, and a borderline significant decrease in appendicular lean mass and SMI compared to controls. In contrast, aerobic exercise significantly preserved appendicular lean mass and SMI. Diet + exercise attenuated the loss of appendicular lean mass and SMI compared to diet alone, and did not result in significant loss of total- or appendicular lean mass compared to controls. Neither serum 25(OH)D nor age were significant moderators of the intervention effects. Conclusions Aerobic exercise added to dietary weight loss can attenuate the loss of appendicular lean mass during weight loss, and may be effective for the prevention and treatment of sarcopenia among overweight and obese postmenopausal women. PMID:23190588

  6. Role of protein and amino acids in promoting lean mass accretion with resistance exercise and attenuating lean mass loss during energy deficit in humans.

    Science.gov (United States)

    Churchward-Venne, Tyler A; Murphy, Caoileann H; Longland, Thomas M; Phillips, Stuart M

    2013-08-01

    Amino acids are major nutrient regulators of muscle protein turnover. After protein ingestion, hyperaminoacidemia stimulates increased rates of skeletal muscle protein synthesis, suppresses muscle protein breakdown, and promotes net muscle protein accretion for several hours. These acute observations form the basis for strategized protein intake to promote lean mass accretion, or prevent lean mass loss over the long term. However, factors such as protein dose, protein source, and timing of intake are important in mediating the anabolic effects of amino acids on skeletal muscle and must be considered within the context of evaluating the reported efficacy of long-term studies investigating protein supplementation as part of a dietary strategy to promote lean mass accretion and/or prevent lean mass loss. Current research suggests that dietary protein supplementation can augment resistance exercise-mediated gains in skeletal muscle mass and strength and can preserve skeletal muscle mass during periods of diet-induced energy restriction. Perhaps less appreciated, protein supplementation can augment resistance training-mediated gains in skeletal muscle mass even in individuals habitually consuming 'adequate' (i.e., >0.8 g kg⁻¹ day⁻¹) protein. Additionally, overfeeding energy with moderate to high-protein intake (15-25 % protein or 1.8-3.0 g kg⁻¹ day⁻¹) is associated with lean, but not fat mass accretion, when compared to overfeeding energy with low protein intake (5 % protein or ~0.68 g kg⁻¹ day⁻¹). Amino acids represent primary nutrient regulators of skeletal muscle anabolism, capable of enhancing lean mass accretion with resistance exercise and attenuating the loss of lean mass during periods of energy deficit, although factors such as protein dose, protein source, and timing of intake are likely important in mediating these effects.

  7. Overweight adult cats have significantly lower voluntary physical activity than adult lean cats.

    Science.gov (United States)

    de Godoy, Maria Rc; Shoveller, Anna K

    2017-12-01

    Objectives The objectives of the current pilot study were to evaluate whether body condition score (BCS) and body weight are significantly related to physical activity counts, and to evaluate potential interaction between BCS and voluntary physical activity measured over a 14 day period. Methods Ten (five lean, five overweight), neutered, adult American Shorthair cats were selected for this study (median age 4 ± 0.5 years). Cats with a BCS of ⩽3.0 were considered lean, whereas cats with a BCS >3.0 were considered overweight, using a 5-point scale. Cats were housed in a free-living environment with indoor/outdoor access and were individually fed once daily a commercially available dry extruded diet and allowed 1 h to eat. Voluntary physical activity was measured consecutively for 14 days using the Actical Activity Monitors that were worn parallel to the ribs and attached via a harness. Results Lean cats had a greater mean total daily voluntary physical activity ( P = 0.0059), and a greater voluntary physical activity during light ( P = 0.0023) and dark ( P = 0.0446) periods, with overweight cats having 60% of the physical activity of lean cats. Lean cats were more active before feeding and during animal care procedures. These data suggest that lean cats have a greater anticipatory physical activity prior to feeding and are more eager to have social interaction with humans than overweight cats. A significant interaction was observed between day of physical activity measurement and BCS for total daily voluntary physical activity ( P = 0.0133) and activity during the light period ( P = 0.0016) where lean cats were consistently more active than overweight cats. In general, cats were more active during weekdays vs weekends. Conclusions and relevance The results of this study suggest that overweight cats are less active than lean cats and that voluntary physical activity level appears to be influenced by social interaction with humans.

  8. The maintenance management for lean organization

    Directory of Open Access Journals (Sweden)

    Daniel D. GEORGESCU

    2010-12-01

    Full Text Available The goal of lean maintenance approach is to maintain organization international competitiveness. In the spirit of continuously improvement, in the paper it is shown how by adjusting some Lean manufacturing specific techniques for Total Productive Maintenance (TPM system, was born new maintenance system named Lean TPM. This is a systemic approach with three techniques, which don’t exclude specific techniques of TPM pillars, but complete them: the 7Ss as a critical first step in any improvement program; instantaneous maintenance; improvement setup operations. In the spirit of Lean principle, Lean TPM adjusts overall equipment effectiveness concept for all supply-chain from supplier to customer. Maintaining equipment in its optimal state and continually improving its productivity is the whole strategy behind Lean TPM.

  9. Cultural Aspects when Implementing Lean Production and Lean Product Development – Experiences from a Swedish Perspective

    Directory of Open Access Journals (Sweden)

    Promporn Wangwacharakul

    2014-07-01

    Full Text Available Lean principles and methods, originating in a Japanese cultural context, have spread to a large number of companies throughout the world. The aim of this case study research is to identify and compare national cultural aspects that influence Lean Production and Lean Product Development implementation in Swedish companies. Data were collected through questionnaires, interviews and an industrial workshop with Swedish Lean practitioners. The study shows that some sub-areas in Lean, such as value definition, control systems, leadership, team development, knowledge management, and strategies, are highly dependent on contextual factors related to human, cultural and organizational aspects. These are related to the national culture and should be considered to a higher extent for successful sustainable implementation of Lean in different cultural contexts. As for implementing Lean in Sweden, national cultural characteristics, such as individualism, autonomy and supportive management style fit well with Lean thinking.

  10. Lean Construction Supply Chain : A Literature Review

    OpenAIRE

    Ren, Jiamei

    2012-01-01

    The aim of this thesis is to enhance the management of supply systems in construction industry using lean principles. This study is an attempt to identify what kind of activities causes’ construction process delay and how to perform lean concept into supply chain in practice. The objective is to assure on-time delivery of information and materials to construction sites at lowest cost and maximum value for the customer. These study problems have been analysed from a lean construction supply ch...

  11. The maintenance management for lean organization

    OpenAIRE

    Daniel D. GEORGESCU

    2010-01-01

    The goal of lean maintenance approach is to maintain organization international competitiveness. In the spirit of continuously improvement, in the paper it is shown how by adjusting some Lean manufacturing specific techniques for Total Productive Maintenance (TPM) system, was born new maintenance system named Lean TPM. This is a systemic approach with three techniques, which don’t exclude specific techniques of TPM pillars, but complete them: the 7Ss as a critical first step in any improvemen...

  12. Apply Lean Thinking in Project Management

    OpenAIRE

    Pham Ngoc, Lan

    2015-01-01

    The purpose of this thesis was to study the effects of Lean Thinking in Project Management and how applying Lean Project Management could enhance the productivity of project work. The study was carried using theoretical research and collecting empirical data from three interviews and one case study at a local company. At the end of the study, the major project management problems at the company were identified and analyzed following Lean Principles. It was also pointed out where there...

  13. Lean Six Sigma in financial services

    OpenAIRE

    de Koning, H.; Does, R.J.M.M.; Bisgaard, S.

    2008-01-01

    Lean Thinking and Six Sigma are typically considered as separate approaches to process innovation, with complementary strengths. When combined as Lean Six Sigma, this approach provides a unified framework for systematically developing innovations. Lean Six Sigma can also bring about significant results and breakthrough improvements in financial services, as demonstrated with four case studies from Dutch multinational insurance companies. These cases demonstrate the importance of incremental i...

  14. Lean and the quality of work

    DEFF Research Database (Denmark)

    Jensen, Per Langaa

    2008-01-01

    Lean has for the last decade developed as the dominating model for developing productions processes not only within industry but also in health care, administration and service industries in general. With this development a discussion on human factors aspects of lean has developed internationally....... Literature studies documents that it is not possible to establish a clear relation between lean and the psychosocial aspects of work. The studies also indicate that the context and the implementations process play a dominating role in how lean is experienced. This has been the basis for establishing...

  15. Lean education an overview of current issues

    CERN Document Server

    Flumerfelt, Shannon; Kahlen, Franz-Josef

    2017-01-01

    This edited volume presents a structured approach to a new lean education curriculum, implemented for the education of engineers, managers, administrators as well as human resources developers. The authorship comprises professors and lecturers, trainers and practitioners who educate future professionals in Lean Thinking principles and tools. This edited book provides a platform for authors to share their efforts in building a Body of Knowledge (BoK) for Lean Education. The topical spectrum is state-of-the-art in this field, but the book also includes a glimpse into future developments. This is a highly informative and carefully presented book, providing valuable insight for scholars with an interest in Lean Education.

  16. A Methodology for the Assessment of Experiential Learning Lean: The Lean Experience Factory Study

    Science.gov (United States)

    De Zan, Giovanni; De Toni, Alberto Felice; Fornasier, Andrea; Battistella, Cinzia

    2015-01-01

    Purpose: The purpose of this paper is to present a methodology to assess the experiential learning processes of learning lean in an innovative learning environment: the lean model factories. Design/methodology/approach: A literature review on learning and lean management literatures was carried out to design the methodology. Then, a case study…

  17. Lean programm as a method of managing lean changes in the company

    Directory of Open Access Journals (Sweden)

    Suetina Tatiana Aleksandrovna

    2012-12-01

    Full Text Available This article is about methods and ways of providing changes on enterprices which introduce instruments of lean production. The main accent is how to use metodology of the project management by providing lean-changes. Lean program is proposed as a program of strategic developement of enterprices.

  18. Lean and Green Hand Surgery.

    Science.gov (United States)

    Van Demark, Robert E; Smith, Vanessa J S; Fiegen, Anthony

    2018-02-01

    Health care in the United States is both expensive and wasteful. The cost of health care in the United States continues to increase every year. Health care spending for 2016 is estimated at $3.35 trillion. Per capita spending ($10,345 per person) is more than twice the average of other developed countries. The United States also leads the world in solid waste production (624,700 metric tons of waste in 2011). The health care industry is second only to the food industry in annual waste production. Each year, health care facilities in the United States produce 4 billion pounds of waste (660 tons per day), with as much as 70%, or around 2.8 billion pounds, produced directly by operating rooms. Waste disposal also accounts for up to 20% of a hospital's annual environmental services budget. Since 1992, waste production by hospitals has increased annually by a rate of at least 15%, due in part to the increased usage of disposables. Reduction in operating room waste would decrease both health care costs and potential environmental hazards. In 2015, the American Association for Hand Surgery along with the American Society for Surgery of the Hand, American Society for Peripheral Nerve Surgery, and the American Society of Reconstructive Microsurgery began the "Lean and Green" surgery project to reduce the amount of waste generated by hand surgery. We recently began our own "Lean and Green" project in our institution. Using "minor field sterility" surgical principles and Wide Awake Local Anesthesia No Tourniquet (WALANT), both surgical costs and surgical waste were decreased while maintaining patient safety and satisfaction. As the current reimbursement model changes from quantity to quality, "Lean and Green" surgery will play a role in the future health care system. Copyright © 2018 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

  19. Lean production of intensive cities

    DEFF Research Database (Denmark)

    Ratner, Helene Gad; Bojesen, Anders; Bramming, Pia

    2014-01-01

    turnover. This is analysed in terms of Italo Calvino's Invisible cities. It is argued that Calvino's themes and prose help us understand change as a multiplicity of temporal intensities producing ambivalence and affect. We describe this use of literary abstractions as a ‘hyperbolic social epistemology......’. Through the depiction of four intensifications of Lean Production, the metaphors of Calvino's cities show how reality and illusion; hope and poverty; dreams and death and utopia and dystopia are intricately mingled and produce temporary and equally ambivalent affects of alienation, hypocrisy, self...

  20. Paleo Diet

    OpenAIRE

    Kaucká, Petra

    2012-01-01

    Topic: Paleo Diet Objectives: The aim of bachelor thesis is to study available literature about Paleo Diet and evaluated it. Then determine whether there is awareness of Paleo Diet in Czech republic. In addition, find out whether there is any experience in dieting according to Paleo Diet and whether Paleo Diet coul be applied in our environment. Methods: As a source of information served a survey. The research group consists of respondents who should have any experience in dieting according t...

  1. Perissodactyla diet

    Science.gov (United States)

    Schoenecker, Kathryn A.

    2018-01-01

    Perissodactyla (Schoch 1989) includes tapirs, rhinoceros, wild asses, horses, and zebras. It is the order of hoofed mammals referred to as “odd-toed ungulates” because its members have one to three weight-bearing toes and walk on hoofs or “ungules.” They are herbivores that are specialized to exploit grasslands and brushy habitat (rhinos, horses, asses, zebras) or dense tropical forests (tapirs). All share a common digestive system called hindgut fermentation, or cecal digestion (in the cecum), and can consume relatively tough, coarse forage. Some perissodactyls are “browsers” that forage primarily on woody shrubs and trees, whereas others are “grazers” with a graminoid-dominated diet. They are all predominantly opportunistic feeders and select for quantity over quality of forage; that is, they consume more abundant low-quality forage instead of searching and selecting for higher-quality forage because it gives them the advantage of reducing search effort, which conserves energy.

  2. The LEAN Payload Integration Process

    Science.gov (United States)

    Jordan, Lee P.; Young, Yancy; Rice, Amanda

    2011-01-01

    It is recognized that payload development and integration with the International Space Station (ISS) can be complex. This streamlined integration approach is a first step toward simplifying payload integration; making it easier to fly payloads on ISS, thereby increasing feasibility and interest for more research and commercial organizations to sponsor ISS payloads and take advantage of the ISS as a National Laboratory asset. The streamlined integration approach was addressed from the perspective of highly likely initial payload types to evolve from the National Lab Pathfinder program. Payloads to be accommodated by the Expedite the Processing of Experiments for Space Station (EXPRESS) Racks and Microgravity Sciences Glovebox (MSG) pressurized facilities have been addressed. It is hoped that the streamlined principles applied to these types of payloads will be analyzed and implemented in the future for other host facilities as well as unpressurized payloads to be accommodated by the EXPRESS Logistics Carrier (ELC). Further, a payload does not have to be classified as a National Lab payload in order to be processed according to the lean payload integration process; any payload that meets certain criteria can follow the lean payload integration process.

  3. Lean production and business performance: influences of ...

    African Journals Online (AJOL)

    Hence, this study aims to examine the influence of leadership style in the implementation of lean production. Data were gathered from randomly selected Malaysian manufacturing firms. Findings reveal a positive relationship between lean production and business performance. Specifically, democratic leadership style was ...

  4. Just-in-Time og Lean Manufacturing

    DEFF Research Database (Denmark)

    Michelsen, Aage U.

    2004-01-01

    Filosofi, principper og teknikker i JIT. Princip i Kanban-styring og dimensionering af et Kanban-system. Lean Thinking og Value Stream Mapping.......Filosofi, principper og teknikker i JIT. Princip i Kanban-styring og dimensionering af et Kanban-system. Lean Thinking og Value Stream Mapping....

  5. Indførelse af Lean principper

    DEFF Research Database (Denmark)

    Balmer, Christian; Michelsen, Aage U

    2004-01-01

    I artiklen beskrives, hvorledes lean-principper er indført i en forsikringsvirksomhed samt de opnåede resultater.......I artiklen beskrives, hvorledes lean-principper er indført i en forsikringsvirksomhed samt de opnåede resultater....

  6. Principles of lean planning and control

    NARCIS (Netherlands)

    Riezebos, J.

    2015-01-01

    Lean production systems use teams instead of functional departments as well as simple shop floor control methods to manage the flow of orders at the shop floor. Lean shop floor control focuses on robust and visual methods that are able to cope with variation in processing times, routing sequences,

  7. De praktijk van Lean Six Sigma

    NARCIS (Netherlands)

    Does, R.J.M.M.; de Koning, H.

    2008-01-01

    Zowel Lean als Six Sigma zijn benaderingen van kwaliteits- en efficiëntieverbetering die op dit moment sterk in de belangstelling staan van zowel de industrie als de dienstverlening. Lean Six Sigma integreert beide benaderingen. Ze wordt door sommigen gezien als panacee voor alle mogelijke

  8. Disturbing Practices: Training Workers to Be Lean

    Science.gov (United States)

    Yasukawa, Keiko; Brown, Tony; Black, Stephen

    2014-01-01

    Purpose: The purpose of this paper is to explore the possibilities for expansive learning during organisational change. It considers the introduction of "lean production" as a disturbance to the existing work practices. Design/methodology/approach: The paper considers two case studies of "lean production" training with…

  9. Advancing lean manufacturing, the role of IT

    NARCIS (Netherlands)

    Riezebos, J.; Klingenberg, W.

    This introduction to the special issue discusses the changing role of information technology (IT) in advancing lean production. Lean principles and techniques have been applied in a wide variety of organisations, from make-to-stock to engineer-to-order industries, and even in typical service

  10. Lean in healthcare from employees' perspectives.

    Science.gov (United States)

    Drotz, Erik; Poksinska, Bozena

    2014-01-01

    The purpose of this paper is to contribute toward a deeper understanding of the new roles, responsibilities, and job characteristics of employees in Lean healthcare organizations. The paper is based on three cases studies of healthcare organizations that are regarded as successful examples of Lean applications in the healthcare context. Data were collected by methods including interviews, observations, and document studies. The implementation of Lean in healthcare settings has had a great influence on the roles, responsibilities, and job characteristics of the employees. The focus has shifted from healthcare professionals, where clinical autonomy and professional skills have been the guarding principles of patient care, to process improvement and teamwork. Different job characteristics may make it difficult to implement certain Lean practices in healthcare. Teamwork and decentralization of authority are examples of Lean practices that could be considered countercultural because of the strong professional culture and uneven power distribution, with doctors as the dominant decision makers. Teamwork, value flow orientation, and company-wide involvement in CI were associated with positive effects on the organizations' working environment, staff development, and organizational performance. In order to succeed with Lean healthcare, it is important to understand and recognize the differences in job characteristics between Lean manufacturing and healthcare. This paper provides insights into how Lean implementation changes the roles, responsibilities, and job characteristics of healthcare staff and the challenges and implications that may follow from this.

  11. Lean Six Sigma in a hospital

    NARCIS (Netherlands)

    van den Heuvel, J.; Does, R.J.M.M.; de Koning, H.

    2006-01-01

    Abstract Hospitals today face major challenges. Patients demand quality of care to be improved continuously. Health insurance companies demand the lowest possible prices. Lean Six Sigma is a program that can help healthcare providers to achieve these (seemingly) conflicting goals. Lean Six Sigma is

  12. Skaber lean bedre arbejdsmiljø?

    DEFF Research Database (Denmark)

    Hansen, Nanette Juhler

    2007-01-01

    rationalization strategies, among others Lean, claim to improve working conditions. The aim of this thesis is to identify whether the application of Lean strategies leads to a reduction of the occupational health and safety problem repetitive work. Repetitive work is a problem created by the Taylorisation of work......, and therefore it is to be expected that a break with one or more of the Tayloristic principles can lead to a reduction of repetitive work. This thesis points out a number of areas within which Lean breaks with Tayloristic principles, whilst other principles are maintained. These breaks between Lean...... and Taylorism are also found in the study of the case company. By linking breaks with Taylorism with solutions for the reduction of repetitive work, I point out a number of openings in Lean that may lead to a reduction of repetitive work. By using the concept of openings I present the possibilities offered...

  13. THE LEAN AND SIX SIGMA SINERGY

    Directory of Open Access Journals (Sweden)

    Mirko Sokovic

    2008-12-01

    Full Text Available Many organizations, dealing with continuous improvement methods, have realized that Lean and Six Sigma methodologies complement each other. Lean manufacturing focuses on the remova l of waste so that all processes in the total system add value from the customers' perspectives. The main emphasis of Six Sigma is the application of statistical tools in a disciplined manner, which requires data-driven decision-making. The integration of Lean and Six Sigma provides a synergetic effect, a rapid process improvement strategy for attaining organizational goals. When separated, Lean manufacturing cannot bring a process under statistical control, and Six Sigma cannot dramatically improve cycle time or reduce invested capital. Together, synergistic qualities are created to maximize the potential for a process improvement. The paper deals with Lean and Six Sigma principles and approaches used in modern manufacturing for process improvements, and bring forward benefits that are gained when these two methodologies are integrated.

  14. Lean thinking for a maintenance process

    Directory of Open Access Journals (Sweden)

    Sherif Mostafa

    2015-01-01

    Full Text Available The maintenance process shares significant operating costs in an organisation. Lean thinking can be incorporated into maintenance activities through applying its principles and practices/tools. Lean maintenance (LM is a prerequisite for lean manufacturing systems. This research proposes a new structure for LM process based on a systematic literature review of a significant number of related articles that were published on LM. The process structure is designed based on the five lean principles to guide and support organisations to pursue maintenance excellence. This study establishes a scheme for LM tools that are structured into 2 level 4 bundles and 26 lean practices/tools and develops a House of Waste (HoW to demonstrate the association between maintenance wastes and the LM tools. With a successful accomplishment of the proposed scheme, the performance of a maintenance department can create more improvement opportunities over time to reach the maintenance excellence status.

  15. Researching Lean: Methodological implications of loose definitions

    DEFF Research Database (Denmark)

    Brännmark, Mikael; Langstrand, Jostein; Johansson, Stina

    2012-01-01

    practices seem to overlap with other popular management concepts, such as High Performance Work Systems, World Class Manufacturing and Total Quality Management. This confusion, combined with different methodological and theoretical traditions, has led to much debate and contradictory conclusions regarding...... Lean. The purpose of the paper is to illustrate some key methodological issues that need to be considered in future Lean research to allow increased understanding of Lean effects for different stakeholders, primarily meaning the customer, employer and employees. Design/methodology/approach – The paper...... on the case studies, we suggest that future investigations describe the Lean interventions in more detail. General descriptions or analogies, e.g. ‘learning organizations’, presumably increase the present confusion regarding Lean impact on different stakeholders. The case studies also illustrate...

  16. Transferring lean management infrastructure for increasing productivity

    Directory of Open Access Journals (Sweden)

    Ph.D.Daniel Georgescu

    2010-12-01

    Full Text Available These years, manufacturing function have been transferred rapidly and globally from matured countries to emerging countries. In this paper is about the critical elements for successful transfer of lean management among sites and countries. Based on this general descriptive analysis, current global transfer activity of Lean as well as its future direction is also described. According to the gradual progress of lean management transfer, necessity of its refinement/reinforcement is recognized and some research subjects are proposed for contributing further encouragement of its global activities. In this paper, based on this understanding, requisites for transfer of lean management are discussed through investigating global activity of Lean and specification of infrastructure enabling its smooth transfer is examined

  17. TRUNK LEAN DURING A SINGLE-LEG SQUAT IS ASSOCIATED WITH TRUNK LEAN DURING PITCHING.

    Science.gov (United States)

    Plummer, Hillary A; Oliver, Gretchen D; Powers, Christopher M; Michener, Lori A

    2018-02-01

    Impaired trunk motion during pitching may be a risk factor for upper extremity injuries. Specifically, increased forces about the shoulder and elbow have been observed in pitchers with excessive contralateral trunk lean during pitching. Because of the difficulty in identifying abnormal trunk motions during a high-speed task such as pitching, a clinical screening test is needed to identify pitchers who have impaired trunk motion during pitching. The purpose of this study was to determine the relationship between the degree of lateral trunk lean during the single-leg squat and amount of trunk lean during pitching and if trunk lean during pitching can be predicted from lean during the single-leg squat. Controlled Laboratory Study; Cross-sectional. Seventy-three young baseball pitchers (11.4 ± 1.7 years; 156.3 ± 11.9 cm; 50.5 ± 8.8 kg) participated. An electromagnetic tracking system was used to obtain trunk kinematic data during a single-leg squat task (lead leg) and at maximum shoulder external rotation of a fastball pitch. Pearson correlation coefficients for trunk lean during the single-leg squat and pitching were calculated. A linear regression analysis was performed to determine if trunk lean during pitching can be predicted from lean during the single-leg squat. There was a positive correlation between trunk lean during the single-leg squat and trunk lean during pitching (r = 0.53; plean during the single-leg squat predicted the amount of lateral trunk lean during pitching (R 2 = 0.28; p lean during an SLS and pitching. Trunk lean during the single-leg squat explained 28% of the variance in trunk lean during pitching. Diagnosis, level 3.

  18. Modelling Lean and Green Supply Chain

    Science.gov (United States)

    Duarte, Susana Carla Vieira Lino Medina

    The success of an organization depends on the effective control of its supply chain. It is important to recognize new opportunities for organization and its supply chain. In the last few years the approach to lean, agile, resilient and green supply chain paradigms has been addressed in the scientific literature. Research in this field shows that the integration of these concepts revealed some contradictions among so many paradigms. This thesis is mainly focused on the lean and green approaches. Thirteen different management frameworks, embodied in awards, standards and tools were studied to understand if they could contribute for the modelling process of a lean and green approach. The study reveals a number of categories that are common in most management frameworks, providing adequate conditions for a lean and green supply chain transformation. A conceptual framework for the evaluation of a lean and green organization`s supply chain was proposed. The framework considers six key criteria, namely, leadership, people, strategic planning, stakeholders, processes and results. It was proposed an assessment method considering a criteria score for each criterion. The purpose is to understand how lean and green supply chain can be compatible, using principles, practices, techniques or tools (i.e. elements) that support both, a lean and a green approach, in all key criteria. A case study in the automotive upstream supply chain was performed to understand more deeply if the elements proposed for the conceptual framework could be implemented in a real-scenario. Based on the conceptual framework and the case study, a roadmap to achieve a lean-green transformation is presented. The proposed roadmap revealed its contribution to the understanding on how and when an organization`s supply chain should apply the lean and green elements. This study is relevant to practice, as it may assist managers in the adoption of a lean and green supply chain approach, giving insights for the

  19. Regulation of lean mass, bone mass, and exercise tolerance by the central melanocortin system.

    Directory of Open Access Journals (Sweden)

    Theodore P Braun

    Full Text Available Signaling via the type 4-melanocortin receptor (MC4R is an important determinant of body weight in mice and humans, where loss of function mutations lead to significant obesity. Humans with mutations in the MC4R experience an increase in lean mass. However, the simultaneous accrual of fat mass in such individuals may contribute to this effect via mechanical loading. We therefore examined the relationship of fat mass and lean mass in mice lacking the type-4 melanocortin receptor (MC4RKO. We demonstrate that MC4RKO mice display increased lean body mass. Further, this is not dependent on changes in adipose mass, as MC4RKO mice possess more lean body mass than diet-induced obese (DIO wild type mice with equivalent fat mass. To examine potential sources of the increased lean mass in MC4RKO mice, bone mass and strength were examined in MC4RKO mice. Both parameters increase with age in MC4RKO mice, which likely contributes to increases in lean body mass. We functionally characterized the increased lean mass in MC4RKO mice by examining their capacity for treadmill running. MC4R deficiency results in a decrease in exercise performance. No changes in the ratio of oxidative to glycolytic fibers were seen, however MC4RKO mice demonstrate a significantly reduced heart rate, which may underlie their impaired exercise performance. The reduced exercise capacity we report in the MC4RKO mouse has potential clinical ramifications, as efforts to control body weight in humans with melanocortin deficiency may be ineffective due to poor tolerance for physical activity.

  20. The effect of ghrelin upon the early immune response in lean and obese mice during sepsis.

    Directory of Open Access Journals (Sweden)

    Daniel Siegl

    Full Text Available It is well established that obesity-related hormones can have modulatory effects associated with the immune response. Ghrelin, a hormone mainly derived from endocrine cells of the gastric mucosa, regulates appetite, energy expenditure and body weight counteracting leptin, a hormone mainly derived from adipocytes. Additionally, receptors of both have been detected on immune cells and demonstrated an immune regulatory function during sepsis.In the present study, the effect of peripheral ghrelin administration on early immune response and survival was investigated with lean mice and mice with diet-induced obesity using cecal ligation and puncture to induce sepsis.In the obese group, we found that ghrelin treatment improved survival, ameliorated hypothermia, and increased hyperleptinemia as compared to the lean controls. We also observed that ghrelin treatment divergently regulated serum IL-1ß and TNF-α concentrations in both lean and obese septic mice. Ghrelin treatment initially decreased but later resulted in increased bacteriaemia in lean mice while having no impact upon obese mice. Similarly, ghrelin treatment increased early neutrophil oxidative burst while causing a decrease 48 hours after sepsis inducement.In conclusion, as the immune response to sepsis temporally changes, ghrelin treatment differentially mediates this response. Specifically, we observed that ghrelin conferred protective effects during the early phase of sepsis, but during the later phase deteriorated immune response and outcome. These adverse effects were more pronounced upon lean mice as compared to obese mice.

  1. Factors influencing insulin and glucagon secretion in lean and genetically obese mice

    International Nuclear Information System (INIS)

    Beloff-Chain, A.; Newman, M.E.; Mansford, K.R.L.

    1977-01-01

    The control of 125 I-labelled insulin and glucagon secretion from isolated pancreatic islets of lean and genetically obese mice has been compared. The enlarged islets of obese mouse pancreas and islets of obese mice maintained on a restricted diet manifested a greater response to glucose stimulation of insulin secretion than the lean mice islets. The glucagon content of the islets, the secretion of glucagon in a medium containing 150 mg% glucose and the stimulation of glucagon secretion by arginine did not differ significantly in the two groups. Adrenaline stimulated glucagon secretion in vitro from obese mice but not from lean mice. Antiinsulin serum injections into obese mice increased the plasma glucagon levels about twofold and had no effect on glucagon levels in lean mice, although the level of hyperglycaemia was the same in both groups. It is suggested that the suppression of glucagon release by glucose requires a higher concentration of insulin in the obese mouse pancreas than in lean mice. (orig./AJ) [de

  2. Factors influencing insulin and glucagon secretion in lean and genetically obese mice

    Energy Technology Data Exchange (ETDEWEB)

    Beloff-Chain, A; Newman, M E; Mansford, K R.L. [Imperial Coll. of Science and Technology, London (UK). Dept. of Biochemistry

    1977-01-01

    The control of /sup 125/I-labelled insulin and glucagon secretion from isolated pancreatic islets of lean and genetically obese mice has been compared. The enlarged islets of obese mouse pancreas and islets of obese mice maintained on a restricted diet manifested a greater response to glucose stimulation of insulin secretion than the lean mice islets. The glucagon content of the islets, the secretion of glucagon in a medium containing 150 mg% glucose and the stimulation of glucagon secretion by arginine did not differ significantly in the two groups. Adrenaline stimulated glucagon secretion in vitro from obese mice but not from lean mice. Antiinsulin serum injections into obese mice increased the plasma glucagon levels about twofold and had no effect on glucagon levels in lean mice, although the level of hyperglycaemia was the same in both groups. It is suggested that the suppression of glucagon release by glucose requires a higher concentration of insulin in the obese mouse pancreas than in lean mice.

  3. Mediterranean diet

    Science.gov (United States)

    ... page: //medlineplus.gov/ency/patientinstructions/000110.htm Mediterranean diet To use the sharing features on this page, ... and other health problems. How to Follow the Diet The Mediterranean diet is based on: Plant-based ...

  4. An empirical review of lean manufacturing and their strategies

    Directory of Open Access Journals (Sweden)

    Virender Chahal

    2017-07-01

    Full Text Available The theory of lean manufacturing provides the quality of the products in minimum cost and pro-vides customer satisfaction. Today, the competition level is very high and every industry tries to supply high quality products in nominal cost, so lean is the latest tool to achieve. The objective of this paper is to study different lean concepts under various lean strategies. This study helps to find out the status of lean manufacturing and its ways of implementation. Also in this paper, there is a discussion about lean manufacturing concept, lean waste, lean strategies, lean barriers and cycle of lean implementation. This paper presents a literature review to clear the status of lean manufacturing and their strategies with help of collection of relevant papers.

  5. Adapting lean to histology laboratories.

    Science.gov (United States)

    Buesa, René J

    2009-10-01

    Histology laboratories (histolabs) can increase productivity and reduce turnaround time and errors by using any one of several available management tools. After a few years of operation, all histolabs develop workflow problems. Histology laboratories handling more than 20,000 cases per year benefit the most from implementing management tools, as occurred in the 25 facilities summarized in this article. Discontinuous workflow, lack of "pulling" between steps, accepting unavoidable waiting times while working with small batches within work cells, and a workflow with an uneven rate of completion, are some of the adaptations required by the Lean system when it is used in histology because 70% of the tasks are manual and the flow has to be interrupted to add value to the pieces of tissue during tissue processing, no matter how short that step is. After all these adaptations are incorporated, the histolab becomes as "Lean" as it can be, and the qualifier is also a recognition of the effort and personnel involvement in the implementation. Given its service nature, productivity increments do not expand the histolab customer base and could lead to staffing reductions. This is one of the causes of reluctance by some employees for implementing these techniques which are mostly driven by cost reductions sought by insurance companies and administrators, and not necessarily because of a real medical need to reduce the turnaround time. Finally, any histolab wanting to improve its workflow can follow some easy steps presented here as a guide to accomplish that objective. These steps stress the need for the supervisors to insure that the personnel in the histology laboratory are being paid at a comparable rate as other histolabs in the area.

  6. Obstacles to lean in healthcare: Mindsets and the nature of work

    DEFF Research Database (Denmark)

    Edwards, Kasper; Nielsen, Anders Paarup

    2009-01-01

    The ideas and principles from lean management are now widely being adopted within the health care sector. The interest in lean from managers and policy makers, however, appear to contrast the realized benefits. An analysis of cases reported in literature and three Danish healthcare cases show...... for example laboratory work, logistical issues for patient e.g. emergency room layout, billing processes, and logistics of medical supplies. At first glance an explanation could be found in the conservative nature of the medical community which needs substantial scientific evidence to change behavior....... This is of course not true as new modes of treatment are rapidly implemented when their effect has been documented. The health care sector therefore presents a paradox: Why can changes in treatment be implemented without problems, when lean and thereby changes in work processes are so difficult? This paper will try...

  7. Lean Six Sigma implementation and organizational culture.

    Science.gov (United States)

    Knapp, Susan

    2015-01-01

    The purpose of this paper is to examine the relationship between four organizational cultural types defined by the Competing Values Framework and three Lean Six Sigma implementation components - management involvement, use of Lean Six Sigma methods and Lean Six Sigma infrastructure. The study involved surveying 446 human resource and quality managers from 223 hospitals located in Maine, New Hampshire, Vermont, Massachusetts and Rhode Island using the Organizational Culture Assessment Instrument. Findings - In total, 104 completed responses were received and analyzed using multivariate analysis of variance. Follow-up analysis of variances showed management support was significant, F(3, 100)=4.89, p cultures having significant interactions with management support. The relationship between organizational culture and Lean Six Sigma in hospitals provides information on how specific cultural characteristics impact the Lean Six Sigma initiative key components. This information assists hospital staff who are considering implementing quality initiatives by providing an understanding of what cultural values correspond to effective Lean Six Sigma implementation. Managers understanding the quality initiative cultural underpinnings, are attentive to the culture-shared values and norm's influence can utilize strategies to better implement Lean Six Sigma.

  8. Lean in healthcare: the unfilled promise?

    Science.gov (United States)

    Radnor, Zoe J; Holweg, Matthias; Waring, Justin

    2012-02-01

    In an effort to improve operational efficiency, healthcare services around the world have adopted process improvement methodologies from the manufacturing sector, such as Lean Production. In this paper we report on four multi-level case studies of the implementation of Lean in the English NHS. Our results show that this generally involves the application of specific Lean 'tools', such as 'kaizen blitz' and 'rapid improvement events', which tend to produce small-scale and localised productivity gains. Although this suggests that Lean might not currently deliver the efficiency improvements desired in policy, the evolution of Lean in the manufacturing sector also reveals this initial focus on the 'tool level'. In moving to a more system-wide approach, however, we identify significant contextual differences between healthcare and manufacturing that result in two critical breaches of the assumptions behind Lean. First, the customer and commissioner in the private sector are the one and the same, which is essential in determining 'customer value' that drives process improvement activities. Second, healthcare is predominantly designed to be capacity-led, and hence there is limited ability to influence demand or make full use of freed-up resources. What is different about this research is that these breaches can be regarded as not being primarily 'professional' in origin but actually more 'organisational' and 'managerial' and, if not addressed could severely constrain Lean's impact on healthcare productivity at the systems level. Copyright © 2011 Elsevier Ltd. All rights reserved.

  9. The human side of lean teams.

    Science.gov (United States)

    Wackerbarth, Sarah B; Strawser-Srinath, Jamie R; Conigliaro, Joseph C

    2015-05-01

    Organizations use lean principles to increase quality and decrease costs. Lean projects require an understanding of systems-wide processes and utilize interdisciplinary teams. Most lean tools are straightforward, and the biggest barrier to successful implementation is often development of the team aspect of the lean approach. The purpose of this article is to share challenges experienced by a lean team charged with improving a hospital discharge process. Reflection on the experience provides an opportunity to highlight lessons from The Team Handbook by Peter Scholtes and colleagues. To improve the likelihood that process improvement initiatives, including lean projects, will be successful, organizations should consider providing training in organizational change principles and team building. The authors' lean team learned these lessons the hard way. Despite the challenges, the team successfully implemented changes throughout the organization that have had a positive impact. Training to understand the psychology of change might have decreased the resistance faced in implementing these changes. © 2014 by the American College of Medical Quality.

  10. In vivo measurements of nitrogen, hydrogen, carbon and potassium in genetically obese and lean pigs

    International Nuclear Information System (INIS)

    Ellis, K.J.; Shypailo, R.J.; Sheng, H.P.; Mersmann, H.J.; Pond, W.G.

    1991-01-01

    Characteristic gamma rays are emitted promptly by elements during exposure to neutrons. Gamma ray emissions enable a radioanalytical analysis of the body's composition of protein (nitrogen), water (hydrogen), fat (carbon), and muscle (natural 40 K). The authors have used this method in vivo to detect changes in the body composition of obese and lean pigs (10-20 kg body wt) in response to an altered cholesterol diet

  11. In vivo measurements of nitrogen, hydrogen, and carbon in genetically obese and lean pigs

    International Nuclear Information System (INIS)

    Ellis, K.J.; Shypailo, R.J.; Sheng, H.-P.; Pond, W.G.

    1992-01-01

    Characteristic gamma-rays are emitted promptly by elements during exposure to neutrons. These emissions enable a radioanalytical analysis of the body's composition of protein (nitrogen), water (hydrogen), and fat (carbon). We have used this method in vivo to determine the body composition of obese and lean pigs (10 to 20 kg body wt) fed an altered cholesterol diet. (author) 10 refs.; 5 figs.; 1 tab

  12. Leading Lean: a Canadian healthcare leader's guide.

    Science.gov (United States)

    Fine, Benjamin A; Golden, Brian; Hannam, Rosemary; Morra, Dante

    2009-01-01

    Canadian healthcare organizations are increasingly asked to do more with less, and too often this has resulted in demands on staff to simply work harder and longer. Lean methodologies, originating from Japanese industrial organizations and most notably Toyota, offer an alternative - tried and tested approaches to working smarter. Lean, with its systematic approaches to reducing waste, has found its way to Canadian healthcare organizations with promising results. This article reports on a study of five Canadian healthcare providers that have recently implemented Lean. We offer stories of success but also identify potential obstacles and ways by which they may be surmounted to provide better value for our healthcare investments.

  13. Activity of thyroxine 5' deiodinase in brown fat of lean and obese zucker rats

    International Nuclear Information System (INIS)

    Wu, S.Y.; Fisher, D.A.; Stern, J.S.; Glick, Z.

    1986-01-01

    This study examines the possibility that the reduced brown adipose tissue (BAT) thermogenesis in the Zucker obese rat may result from a limited capacity for conversion of T 4 to T 3 in BAT, through activity of T 4 5' deiodinase. Eighteen lean (Fa/.) and 18 age matched obese (fa/fa), about 16 weeks old, were each divided into 3 groups (n=6 per group). Group 1 and 2 were fed Purina Rat Chow and a cafeteria diet respectively for 21 days, and maintained at 22 0 C+/-2. Group 3 was fed rat chow and maintained at 8 0 C+/-1 for 7 days. Activity of T 4 5'deiodinase was determined in vitro. T 3 was measured by a radioimmunoassay. The rate of T 4 to T 3 conversion was similar in the lean and the obese rats maintained at room temperature, whether fed rat chow or a cafeteria diet (about 40 to 50 pmol T 3 /scapular BAT depot, per hour). However, lean rats exposed to the cold displayed about a 5 fold increase in T 4 5' deiodinase activity (p 3 may account for the reduced tolerance of obese animals to cold, but it does not account for their reduced diet induced BAT thermogenesis

  14. Making it lean applying lean practices to the work of it

    CERN Document Server

    Williams, Howard

    2013-01-01

    Making IT Lean: Applying Lean Practices to the Work of IT presents Lean concepts and techniques for improving processes and eliminating waste in IT operations and IT Service Management, in a manner that is easy to understand. The authors provide a context for discussing several areas of application within this domain, allowing you to quickly gain insight into IT processes and Lean principles.The text reviews IT Service Management, with reference to the IT Infrastructure Library (ITIL®) as a framework for best practices-explaining how to use it to accommod

  15. LEAN SIX SIGMA – MULTIPLE CASE STUDY

    Directory of Open Access Journals (Sweden)

    Delvio Venanzi

    2017-12-01

    Full Text Available Lean Six Sigma é uma gestão focada na qualidade e desempenho produtivo em sistemas operacionais. Este artigo discute os fundamentos desta metodologia através de duas diferentes concepções de gestão, Lean Manufacturing e Six Sigma. Primeiro, o artigo explica o DMAIC (definir, medir, analisar, melhorar e controlar e suas respectivas fases, após a filosofia Lean com o sipoc e técnicas de mapeamento de fluxo de valor. O artigo pretende mostrar a integração destes dois conceitos e seus resultados. A metodologia consistiu em uma teoria baseada em uma pesquisa bibliográfica de pesquisa exploratória que consistiu de três estudos de caso em empresas de diferenças localizadas em Sorocaba, São Paulo. Neste artigo estuda a aplicação de Lean Seis Sigma e seus resultados.

  16. Lean Construction Applications for Bridge Inspection

    Science.gov (United States)

    2017-10-01

    Lean philosophy was used to analyze the efficiency of bridge inspection. Emphasis was put on identifying activities that add value to the final output, an owner approved bridge inspection report. 26 bridge inspections were shadowed. Time spent on bri...

  17. Lean in service industries: A literature review

    Science.gov (United States)

    V, Vignesh; Suresh, M.; Aramvalarthan, S.

    2016-09-01

    Lean service is an amalgamation of tools and practices which, if applied appropriately, would definitely improve the existing quality of operations and ensure the generation of a large amount of favourable financial and economic outcomes and improve the behaviour of the workforce. As a result, it assumes of great significance in the fiercely competitive modern world. This article presents a comprehensive bibliographic study about the various lean service practices through a variety of approaches like service improvement, manufacturing, supply chain, market and retailing approaches, etc. Thus it gives a clear view on how the lean services are implemented in various sectors and the contribution of lean service towards improving the quality in the services provided while reducing the costs.

  18. Implementation of Lean Manufacturing in Romanian Organisations

    Directory of Open Access Journals (Sweden)

    Ucenic Camelia Ioana

    2017-01-01

    Full Text Available The implementation of lean manufacturing is one of the main tools for attaining a higher performance level in the Romanian organisations. The study uses data collected at middle management level from organisations located in Transylvania. The organisations come from different fields of activity and are in different stages of lean implementation. The article makes use of quantitative and qualitative instruments for the evaluation of lean in the above mentioned companies. Characteristics as waste reduction, cost, quality, product design have different approaches in the companies. Their way of approach gives useful information regarding the type of company from the point of view of lean manufacturing implementation. This knowledge provides a useful support at different managerial levels in the process of decision making.

  19. Lean six sigma application to transportation logistics

    Directory of Open Access Journals (Sweden)

    Simone Tavares Fernandes

    2012-06-01

    Full Text Available This work presents the application of Lean Six Sigma in a case study of a metallurgic industry. The Six Sigma and the Lean are two processes used by enterprises in Brazil and worldwide. Currently the integration of these processes is a challenge for these companies, which search a way more efficient to reduce their wastes and to adapt to the needs of their markets. The paper had as purpose to demonstrate the applicability of the Lean Six Sigma in a real logistical problem related to the transportation of goods among units of a metallurgic industry. The stages used for the solution of the problem follow the DMAIC cycle – Define, Measure, Analyze, Improve and Control. The paper presents in details the integrated approach of the improvement processes Lean and Six Sigma, their tools set, as well the excellent results obtained in the case study.

  20. LEAN Tools in the IT Sector

    Directory of Open Access Journals (Sweden)

    Zoltan VAJNA

    2015-05-01

    Full Text Available Nowadays the LEAN tools with their proven efficiency are indispensable parts of the production management. I think there is no producing enterprise that cannot utilize a wide variety of these LEAN tools. The question now is how these tools can support companies in increasing the efficiency of their supporting IT processes. In this study I will demonstrate how these well-known LEAN tools from production management can be used in IT management to create more cost-effective, efficient and transparent solutions during the IT system development and IT operation activities. I will show respectively without attempting to be comprehensive the most important tools of the LEAN management and I will analyse how these tools can be used in the IT sector. At the end of this study I will demonstrate what the IT managers think about the practical use of these tools.

  1. A case study of lean, sustainable manufacturing

    Directory of Open Access Journals (Sweden)

    Geoff Miller

    2010-06-01

    Full Text Available A small furniture production company has integrated lean tools and sustainability concepts with discrete event simulation modeling and analysis as well as mathematical optimization to make a positive impact on the environment, society and its own financial success. The principles of lean manufacturing that aid in the elimination of waste have helped the company meet ever increasing customer demands while preserving valuable resources for future generations. The implementation of lean and sustainable manufacturing was aided by the use of discrete event simulation and optimization to overcome deficits in lean’s traditional implementation strategies. Lean and green manufacturing can have a more significant, positive impact on multiple measures of operational performance when implemented concurrently rather than separately. These ideas are demonstrated by three applications.

  2. A Web-Based Lean Simulation Game for Office Operations: Training the Other Side of a Lean Enterprise

    Science.gov (United States)

    Kuriger, Glenn W.; Wan, Huang-da; Mirehei, S. Moussa; Tamma, Saumya; Chen, F. Frank

    2010-01-01

    This research proposes a Web-based version of a lean office simulation game (WeBLOG). The game is designed to be used to train lean concepts to office and administrative personnel. This group belongs to the frequently forgotten side of a lean enterprise. Over four phases, the game presents the following seven lean tools: one-piece flow,…

  3. The Finnish healthcare services lean management.

    Science.gov (United States)

    Hihnala, Susanna; Kettunen, Lilja; Suhonen, Marjo; Tiirinki, Hanna

    2018-02-05

    Purpose The purpose of this paper is to discuss health services managers' experiences of management in a special health-care unit and development efforts from the point of view of the Lean method. Additionally, the aim is to deepen the knowledge of the managers' work and nature of the Lean method development processes in the workplace. The research focuses on those aspects and results of Lean method that are currently being used in health-care environments. Design/methodology/approach These data were collected through a number of thematic interviews. The participants were nurse managers ( n = 7) and medical managers ( n = 7) who applied Lean management in their work at the University Hospital in the Northern Ostrobothnia Health Care District. The data were analysed with a qualitative content analysis. Findings A common set of values in specialized health-care services, development of activities and challenges for management in the use of the Lean manager development model to improve personal management skills. Practical implications Managers in specialized health-care services can develop and systematically manage with the help of the Lean method. This emphasizes assumptions, from the point of view of management, about systems development when the organization uses the Lean method. The research outcomes originate from specialized health-care settings in Finland in which the Lean method and its associated management principles have been implemented and applied to the delivery of health care. Originality/value The study shows that the research results and in-depth knowledge on Lean method principles can be applied to health-care management and development processes. The research also describes health services managers' experiences of using the Lean method. In the future, these results can be used to improve Lean management skills, identify personal professional competencies and develop skills required in development processes. Also, the research findings can be used

  4. Lean Implementation : the significance of people and dualism

    OpenAIRE

    Bengt, Halling

    2013-01-01

    Lean, with its origins at the Toyota Motor Company, is a concept that is known to increase effectiveness in manufacturing. The Lean concept is now argued to be relevant not only in manufacturing but in service and health-care delivery as well. The reported results of Lean implementation efforts are divided. There are reports that most of the Lean implementation efforts are not reaching the goal; on the other hand, there are reports of promising results. The divided results from Lean implement...

  5. Lean in the supply chain : research and practice

    OpenAIRE

    Ugochukwu, Paschal

    2012-01-01

    Lean is a management philosophy that enhances customer value through waste elimination and continuous improvement in a system by applying lean principles, practices, and techniques. The focus on lean implementations and research had been typically a single company without extension to the entire supply chain. When the concept of lean is implemented across the entire supply chain, however, it is referred to as lean supply chain. The purpose of this thesis is to create a structure from theory a...

  6. Lean in healthcare: A comprehensive review.

    Science.gov (United States)

    D'Andreamatteo, Antonio; Ianni, Luca; Lega, Federico; Sargiacomo, Massimo

    2015-09-01

    Lean seems to be the next revolution for a better, improved, value-based healhcare. In the last 15 years Lean has been increasingly adapted and adopted in healthcare. Accordingly, Lean healthcare has been developing into a major strand of research since the early 2000s. The aim of this work is to present a comprehensive overview of the main issues highlighted by research on implementation of Lean in a complex contest such as the healthcare one. Comprehensive literature review was conducted in order to identify empirical and theoretical articles published up to September 2013. Thematic analysis was performed in order to extract and synthesis data. 243 articles were selected for analysis. Lean is best understood as a means to increase productivity. Hospital is the more explored setting, with emergency and surgery as the pioneer departments. USA appears to be the leading country for number of applications. The theoretical works have been focused mainly on barriers, challenges and success factors. Sustainability, framework for measurement and critical appraisal remain underestimated themes. Evaluations of "system wide approach" are still low in number. Even though Lean results appear to be promising, findings so far do not allow to draw a final word on its positive impacts or challenges when introduced in the healthcare sector. Scholars are called to explore further the potentiality and the weaknesses of Lean, above all as for the magnitude of investments required and for the engagement of the whole organization it represents increasingly strategic choice, whilst health professionals, managers and policy makers could and should learn from research how to play a pivotal role for a more effective implementation of lean in different health contexts. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  7. Lean tool used in the automotive industry

    Directory of Open Access Journals (Sweden)

    Manuela Ingaldi

    2014-10-01

    Full Text Available In the paper basic concepts of Lean Manufacturing were presented. A company specializing in the development of vehicle dynamics, driver assistance systems, brake systems, seat belt sand electronics technology was characterized. The company is engaged in designing and manufacturing world-class products for the automotive market. The Lean tools used in the production hall, such as Yamazumi chart, machine motion analysis, MTM method and timing, were presented.

  8. Lean tool used in the automotive industry

    OpenAIRE

    Manuela Ingaldi; Marta Jagusiak-Kocik

    2014-01-01

    In the paper basic concepts of Lean Manufacturing were presented. A company specializing in the development of vehicle dynamics, driver assistance systems, brake systems, seat belt sand electronics technology was characterized. The company is engaged in designing and manufacturing world-class products for the automotive market. The Lean tools used in the production hall, such as Yamazumi chart, machine motion analysis, MTM method and timing, were presented.

  9. Implementing lean manufacturing system: ISM approach

    Directory of Open Access Journals (Sweden)

    Naveen Kumar

    2013-09-01

    Full Text Available Purpose: Lean Manufacturing System has emerged as an important area of research in Indian context. The requirement of Lean Manufacturing has increased due to defects in products (semi finished and finished and subsequent increase in cost. In this context, this study is an attempt to develop a structural model of the variables, important to implement Lean Manufacturing System in Indian automobile industry. Design/Methodology/Approach: Various variables of lean manufacturing system implementation have been identified from literature review and experts’ opinions. Contextual relationship among these identified variables has been set after carrying out brainstorming session. Further, classification of the variables has been carried out based upon the driving power and dependence. In addition to this, a structural model of variables to implement lean concept in Indian automobile industry has also been developed using Interpretive Structural Modeling (ISM technique. Questionnaire based survey has also been conducted to rank these variables. Findings: Eighteen variables have been identified from the literature and subsequent discussions with experts. Out of which, nine variables have been identified as dependent and nine variables have been identified as driver. No variable has been identified as linkage variable and autonomous variable. From the model developed, ‘Relative cost benefits’ has been identified as top level dependent variable and top management commitment as bottom level most independent variable. Research limitations/Implications: The model so developed is a hypothetical model based upon experts’ opinions. The conclusions so drawn may be further modified to apply in real situation. Practical implication: Clear understanding of interactions among these variables will help organizations to prioritize and manage these variables more effectively and efficiently to draw advantage from lean manufacturing system implementation

  10. INNOVATION LEAN PRINCIPLES IN AUTOMOTIVE GREEN MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Dušan Sabadka

    2014-12-01

    Full Text Available Today, industries such as automotive and manufacturing industries deal with a lot of environmental regulations. Lean is a production strategy whose fundamental principles drive the industry towards a more effective production of goods and services. The eco-efficiency concept is primary to sustainable development and intends to provide more value with less environmental impact. The aim of this study is to identify and explore the contributions of Lean to reduce environmental impacts that naturally result from industrial activity.

  11. The diet of harbour seals (Phoca vitulina at the southern limit of its European distribution (Normandy, France

    Directory of Open Access Journals (Sweden)

    Jérôme Spitz

    2010-09-01

    Full Text Available Changes in habitat availability or resources are likely to have the biggest impact on survival or abundance of individuals found at the extremity of the population’s range. In the case of such marginal populations, the first step in designing appropriate conservation plans is the identification of potential risks to the viability of the population, or subpopulation. For example, the interaction between coastal seals and fisheries is often considered as a major conservation issue, due to the potential co-exploitation of the same resources by both fishermen and seals. The diet of harbour seals was investigated by scat analysis at the southern extremity of their European range, in Baie des Veys (Normandy, France. A total of 121 scats, analysed following standard methodologies, revealed a diet largely dominated by mullets, Mugilidae (49% by mass, plaice Pleuronectes platess (29% by mass and garfish, Belone belone (19% by mass. The diet of harbour seals at the edge of their European distribution differs from all previous studies conducted elsewhere, in terms of species composition, but shows a similar balance between fat and lean fish. Overall dietcomposition suggests a low potential for interaction with fisheries as commercial fishery target species are almost absent.

  12. The promise of Lean in health care.

    Science.gov (United States)

    Toussaint, John S; Berry, Leonard L

    2013-01-01

    An urgent need in American health care is improving quality and efficiency while controlling costs. One promising management approach implemented by some leading health care institutions is Lean, a quality improvement philosophy and set of principles originated by the Toyota Motor Company. Health care cases reveal that Lean is as applicable in complex knowledge work as it is in assembly-line manufacturing. When well executed, Lean transforms how an organization works and creates an insatiable quest for improvement. In this article, we define Lean and present 6 principles that constitute the essential dynamic of Lean management: attitude of continuous improvement, value creation, unity of purpose, respect for front-line workers, visual tracking, and flexible regimentation. Health care case studies illustrate each principle. The goal of this article is to provide a template for health care leaders to use in considering the implementation of the Lean management system or in assessing the current state of implementation in their organizations. Copyright © 2013 Mayo Foundation for Medical Education and Research. Published by Elsevier Inc. All rights reserved.

  13. Lean healthcare from a change management perspective.

    Science.gov (United States)

    van Rossum, Lisa; Aij, Kjeld Harald; Simons, Frederique Elisabeth; van der Eng, Niels; Ten Have, Wouter Dirk

    2016-05-16

    Purpose - Lean healthcare is used in a growing number of hospitals to increase efficiency and quality of care. However, healthcare organizations encounter problems with the implementation of change initiatives due to an implementation gap: the gap between strategy and execution. From a change management perspective, the purpose of this paper is to increase scientific knowledge regarding factors that diminish the implementation gap and make the transition from the "toolbox lean" toward an actual transformation to lean healthcare. Design/methodology/approach - A cross-sectional study was executed in an operating theatre of a Dutch University Medical Centre. Transformational leadership was expected to ensure the required top-down commitment, whereas team leadership creates the required active, bottom-up behavior of employees. Furthermore, professional and functional silos and a hierarchical structure were expected to impede the workforce flexibility in adapting organizational elements and optimize the entire process flow. Findings - The correlation and regression analyses showed positive relations between the transformational leadership and team leadership styles and lean healthcare implementation. The results also indicated a strong relation between workforce flexibility and the implementation of lean healthcare. Originality/value - With the use of a recently developed change management model, the Change Competence Model, the authors suggest leadership and workforce flexibility to be part of an organization's change capacity as crucial success factor for a sustainable transformation to lean healthcare.

  14. Implementing Lean Health Reforms in Saskatchewan

    Directory of Open Access Journals (Sweden)

    Greg Marchildon

    2013-07-01

    Full Text Available Saskatchewan has gone further than any other Canadian province in implementing health system process improvements using Lean, a production line discipline that originated with the automobile industry. The goal of the Lean reform is to reduce waste and improve quality and overall health system performance by long-term changes in behaviour. Lean enjoys a privileged position on the provincial government’s agenda because of the policy’s championing by the Deputy Minister of Health and the policy’s fit with the government’s patient-centred care agenda. The implementation of reform depends on a major investment of time in the training and Lean-certification of key leaders and managers in the provincial health system. The Saskatchewan Union of Nurses, the union representing the single largest group of health workers in the province, has agreed to co-operate with the provincial government in implementing Lean-type reforms. Thus far, the government has had limited independent evaluation of Lean while internal evaluations claim some successes.

  15. Visual communication in lean organizations

    Directory of Open Access Journals (Sweden)

    Iuga Maria Virginia

    2017-01-01

    Full Text Available Many researchers have studied the role and importance of communication and communication types for organizations and their work force. The topic of organizational communication is a constantly changing one. The thing that remains stable throughout this very wide topic is its purpose: communication is vital for the effectiveness and success of organizations of all sizes, types and cultures. In terms of type, one could split up topic by type as followed: verbal, visual and written. This research paper focuses on the visual component at shop floor within automotive organizations. It aims at giving the reader a structured overview on the most appropriate but also lean visual communication practices. In order to establish these methods at shop floor, a survey was conducted among nine big automotive companies in Romania. It was then followed up by a second survey dedicated to check the effectiveness of implementation of these methods in a big automotive organization. The paper presents the analyses, results and the conclusions of this surveys.

  16. Assessment of gut microbiota populations in lean and obese Zucker rats.

    Directory of Open Access Journals (Sweden)

    Reza Hakkak

    Full Text Available Obesity has been on the rise in the US and worldwide for the last several decades. Obesity has been associated with chronic disease development, such as certain types of cancer, type 2 diabetes, cardiovascular disease, and liver diseases. Previously, we reported that obesity promotes DMBA-induced mammary tumor development using the obese Zucker rat model. The intestinal microbiota is composed of a diverse population of obligate and facultative anaerobic microorganisms, and these organisms carry out a broad range of metabolic activities. Obesity has been linked to changes in the intestinal microbiota, but the composition of the bacterial populations in lean and obese Zucker rats has not been carefully studied. Therefore, the objective of this study was to determine the effects of obesity on the gut microbiota in this model. Lean and obese female Zucker rats (n = 16 were fed an AIN-93G-like diet for 8 weeks. Rats were weighed twice weekly, and fecal samples were collected at the beginning and end of the experiment. 16S rRNA gene sequencing was used to evaluate the composition of the fecal bacterial populations. At the outset of the study, the lean rats exhibited much lower ratios of the Firmicutes to Bacteroidetes phyla than the obese rats, but after 60 days, this ratio in the lean rats exceeded that of the obese. This shift was associated with reductions in the Bacteroidaceae, S24-7 and Paraprevotellaceae families in the lean rats. Obese rats also showed increased levels of the genus Akkermansia at day 60. PCoA plots of beta diversity showed clustering of the different test groups, indicating clear differences in intestinal microbiota populations associated with both the time point of the study and the lean or obese status in the Zucker rat model for obesity.

  17. Protein turnover in acid maltase deficiency before and after treatment with a high protein diet.

    OpenAIRE

    Umpleby, A M; Wiles, C M; Trend, P S; Scobie, I N; Macleod, A F; Spencer, G T; Sonksen, P H

    1987-01-01

    A patient with acid maltase deficiency was treated with a high protein diet for 7 months. Protein turnover expressed in terms of lean body mass was shown to be increased in this patient before the diet but was markedly reduced following the diet. The patient improved clinically whilst on the diet both subjectively and in terms of mobility, breathing and reduced peripheral cyanosis at rest.

  18. Lean i Norge : opplever norske bedrifter som er mer lean, større økning i kundetilfredshet enn de som er mindre lean?

    OpenAIRE

    Fagereng, Hanne Eline; Askevold, Elisabeth Cathrine

    2010-01-01

    Vi ønsker å måle i hvor stor grad norske bedrifter har implementert lean, og for å måle grad av lean har vi utviklet et rammeverk basert på lean teori. Hovedformålet med lean er å øke kundeverdi med minst mulig ressursbruk, anstrengelse, energi, utstyr, tid, plass, material og kapital (Womack, Roos and Jones 2007). Vi vil utforske om høyere grad av lean fører til mer tilfredse kunder enn de som har lavere grad av lean. Altså om hovedformålet med lean blir oppnådd hvis man implementerer lean i...

  19. Distinct effects of calorie restriction on adipose tissue cytokine and angiogenesis profiles in obese and lean mice

    Directory of Open Access Journals (Sweden)

    Kurki Eveliina

    2012-06-01

    Full Text Available Abstract Background Obesity associates with low-grade inflammation and adipose tissue remodeling. Using sensitive high-throughput protein arrays we here investigated adipose tissue cytokine and angiogenesis-related protein profiles from obese and lean mice, and in particular, the influence of calorie restriction (CR. Methods Tissue samples from visceral fat were harvested from obese mice fed with a high-fat diet (60% of energy, lean controls receiving low-fat control diet as well as from obese and lean mice kept under CR (energy intake 70% of ad libitum intake for 50 days. Protein profiles were analyzed using mouse cytokine and angiogenesis protein array kits. Results In obese and lean mice, CR was associated with 11.3% and 15.6% reductions in body weight, as well as with 4.0% and 4.6% reductions in body fat percentage, respectively. Obesity induced adipose tissue cytokine expressions, the most highly upregulated cytokines being IL-1ra, IL-2, IL-16, MCP-1, MIG, RANTES, C5a, sICAM-1 and TIMP-1. CR increased sICAM-1 and TIMP-1 expression both in obese and lean mice. Overall, CR showed distinct effects on cytokine expressions; in obese mice CR largely decreased but in lean mice increased adipose tissue cytokine expressions. Obesity was also associated with increased expressions of angiogenesis-related proteins, in particular, angiogenin, endoglin, endostatin, endothelin-1, IGFBP-3, leptin, MMP-3, PAI-1, TIMP-4, CXCL16, platelet factor 4, DPPIV and coagulation factor III. CR increased endoglin, endostatin and platelet factor 4 expressions, and decreased IGFBP-3, NOV, MMP-9, CXCL16 and osteopontin expressions both in obese and lean mice. Interestingly, in obese mice, CR decreased leptin and TIMP-4 expressions, whereas in lean mice their expressions were increased. CR decreased MMP-3 and PAI-1 only in obese mice, whereas CR decreased FGF acidic, FGF basic and coagulation factor III, and increased angiogenin and DPPIV expression only in lean mice

  20. Using Dynamic Value Stream Mapping and Lean Accounting Box Scores to Support Lean Implementation

    Science.gov (United States)

    Woehrle, Stephen L.; Abou-Shady, Louay

    2010-01-01

    Lean has proven to be an effective management philosophy for improving businesses in a competitive market by eliminating waste and improving operations. An impact of implementing lean projects is the rapid reduction in inventory levels, which gives management the false impression that profits are decreasing while workers on the shop floor observe…

  1. The relationships between Lean manufacturing, management accounting and firm performance

    DEFF Research Database (Denmark)

    Kristensen, Thomas Borup; Nielsen, Henrik; Grasso, Lawrency

    2016-01-01

    with management accounting practices. Specifically, we document that Lean manufacturing is positively associated with Value Stream Costing, Lean visual controls and, more importantly, measures of labor and materials efficiency. Lean manufacturing is positively related to Lean thinking and both are positively...... associated with operational performance and so are Lean visual controls. We also document that the management accounting practices intervene affecting operational performance and they intervene with Lean thinking as well. Lastly, the relationship between Lean manufacturing and measures of labor and materials......Lean manufacturing has been adopted by numerous western companies as an answer to an increasing competitive environment. Lean manufacturing is seen as an enterprise-wide strategy encompassing a transformation of manufacturing practices, affecting companies’ management accounting practices and...

  2. Implementing lean in Malaysian universities: Lean awareness level in an engineering faculty of a local university

    Science.gov (United States)

    Azim Khairi, M.; Rahman, Mohamed Abd

    2018-01-01

    Many academic articles were published in Malaysia promoting the goodness of lean in manufacturing and industrial sectors but less attention was apparently given to the possibility of obtaining the same universal benefits when applying lean in non-manufacturing sectors especially higher education. This study aims to determine the level of lean awareness among a local university’s community taking its Faculty of Engineering (FoE) as the case study. It also seeks to identify typical FoE’s staff perception on lean regarding its benefits and the obstacles in implementing it. A web-based survey using questionnaires was carried out for 215 respondents consisting of academic and administrative staff of the faculty. Statistical Package for the Social Science (SPSS) was used to analyze the survey data collected. A total of 13.95% of respondents returned the forms. Slightly more than half of those responded (56.7%) have encountered some of the lean terms with mean 1.43 and standard deviation 0.504. However, the large amount of standard deviation somewhat indicates that the real level of lean awareness of FoE as a group was low. In terms of lean benefits, reduction of waste was favored (93.3%) by the respondents with mean 0.93 and standard deviation 0.254. For obstacles in implementing lean, lack of knowledge was selected by most respondents (86.7%) to be the major factor with mean 0.87 and standard deviation 0.346. Through the analysis done, the study may conclude that level of lean awareness among the university‘s community was low thus may hinder implementation of lean concept.

  3. Diet & Nutrition

    Science.gov (United States)

    ... Nutrition Share this page Facebook Twitter Email Diet & Nutrition Eating healthy to take charge of your health. Shelly Diagnosed in 2006 Diet & Nutrition Take Control of Your Weight Portion Control Low ...

  4. Vegetarian Diet

    Science.gov (United States)

    A vegetarian diet focuses on plants for food. These include fruits, vegetables, dried beans and peas, grains, seeds and nuts. There is no single type of vegetarian diet. Instead, vegetarian eating patterns usually fall into the ...

  5. Optimization of large scale food production using Lean Manufacturing principles

    DEFF Research Database (Denmark)

    Engelund, Eva Høy; Friis, Alan; Breum, Gitte

    2009-01-01

    This paper discusses how the production principles of Lean Manufacturing (Lean) can be applied in a large-scale meal production. Lean principles are briefly presented, followed by a field study of how a kitchen at a Danish hospital has implemented Lean in the daily production. In the kitchen...... not be negatively affected by the rationalisation of production procedures. The field study shows that Lean principles can be applied in meal production and can result in increased production efficiency and systematic improvement of product quality without negative effects on the working environment. The results...... show that Lean can be applied and used to manage the production of meals in the kitchen....

  6. Lean Manufacturing Auto Cluster at Chennai

    Science.gov (United States)

    Bhaskaran, E.

    2012-10-01

    Due the presence of lot of automotive Industry, Chennai is known as Detroit of India, that producing over 40 % of the Indian vehicle and components. Lean manufacturing concepts have been widely recognized as an important tool in improving the competitiveness of industries. This is a continuous process involving everyone, starting from management to the shop floor. Automotive Component Industries (ACIs) in Ambattur Industrial Estate, Chennai has formed special purpose vehicle (SPV) society namely Ambattur Industrial Estate Manufacturers Association (AIEMA) Technology Centre (ATC) lean manufacturing cluster (ATC-LMC) during July 2010 under lean manufacturing competitiveness scheme, that comes under National Manufacturing Competitiveness Programme of Government of India. The Tripartite Agreement is taken place between National Productivity Council, consultants and cluster (ATC-LMC). The objective is to conduct diagnostic study, study on training and application of various lean manufacturing techniques and auditing in ten ACIs. The methodology adopted is collection of primary data/details from ten ACIs. In the first phase, diagnostic study is done and the areas for improvement in each of the cluster member companies are identified. In the second phase, training programs and implementation is done on 5S and other areas. In the third phase auditing is done and found that the lean manufacturing techniques implementation in ATC-LMC is sustainable and successful in every cluster companies, which will not only enhance competitiveness but also decrease cost, time and increase productivity. The technical efficiency of LMC companies also increases significantly.

  7. Lean oncology: a new model for oncologists

    Directory of Open Access Journals (Sweden)

    Montesarchio Vincenzo

    2012-04-01

    Full Text Available Abstract The history of the term Lean is relatively recent and originates from the Toyota Production System (TPS. The term "Lean" means "thin", which refers to a mental process, operational, productive, no-frills, quick but not hasty, consequential to the previous event. The Lean process flows seamlessly into the result, eliminates unnecessary complications to the effect, prevents unnecessary equipment processes. The idea is to 'do more with less', like using the (few available resources in the most productive way possible, through the elimination of all types of waste that inevitably accompanies every stage of a production process. Lean management is primarily a management philosophy, a system of values and behaviors that goes beyond the mere application of the instrument and that, once internalized, will form the nucleus of the corporate culture. "Lean Oncology" is a term coined to identify a methodology of care and treatment to cancer patients, consisting on process simplification, streamlining of the organizational and routes of drug treatment, detection and elimination of waste. Its main objective is the centrality of the patient.

  8. Lean oncology: a new model for oncologists.

    Science.gov (United States)

    Montesarchio, Vincenzo; Grimaldi, Antonio Maria; Fox, Bernard A; Rea, Antonio; Marincola, Francesco M; Ascierto, Paolo A

    2012-04-25

    The history of the term Lean is relatively recent and originates from the Toyota Production System (TPS). The term "Lean" means "thin", which refers to a mental process, operational, productive, no-frills, quick but not hasty, consequential to the previous event. The Lean process flows seamlessly into the result, eliminates unnecessary complications to the effect, prevents unnecessary equipment processes. The idea is to 'do more with less', like using the (few) available resources in the most productive way possible, through the elimination of all types of waste that inevitably accompanies every stage of a production process. Lean management is primarily a management philosophy, a system of values and behaviors that goes beyond the mere application of the instrument and that, once internalized, will form the nucleus of the corporate culture. "Lean Oncology" is a term coined to identify a methodology of care and treatment to cancer patients, consisting on process simplification, streamlining of the organizational and routes of drug treatment, detection and elimination of waste. Its main objective is the centrality of the patient.

  9. LEAN PRACTICES FOR PRODUCT DEVELOPMENT PROCESS

    Directory of Open Access Journals (Sweden)

    Guilherme Luz Tortorella

    2015-06-01

    Full Text Available Lean product development (LPD is an approach that comprises lean principles and management practices that aim to reduce waste and improve operational effectiveness throughout the entire value stream in continuous improvement endless journey. Due to that, the ability to innovate, change and learn continuously is a key element in order to minimize product development problems. Several LPD techniques are presented in the literature as possible enablers for lean implementation. However, little has been known about the impact of these enablers on the problems related to product development processes. Thus, this paper aims to examine the relationship between five LPD practices’ constructs and the occurrence frequency of eleven LPD problems’ constructs in companies that are implementing lean. Moreover, the identification of relevant relationships between LPD practices’ and problems’ constructs may contribute to specify the contexts in which problems are expected to occur. The study sample comprises sixty four companies already undergoing lean implementation both in shop floor and offices area. The results indicate that the same practices’ constructs, which are deemed as influential for minimizing LPD problems, present different relationship intensities among them.

  10. Using Lean to Advance Quality Improvement Research.

    Science.gov (United States)

    Blackmore, Christopher Craig; Williams, Barbara L; Ching, Joan M; Chafetz, Lynne A; Kaplan, Gary S

    2016-01-01

    Quality improvement research skills are not commonplace among quality improvement practitioners, and research on the effectiveness of quality improvement has not always kept pace with improvement innovation. However, the Lean tools applied to quality improvement should be equally relevant to the advancement of quality improvement research. We applied the Lean methods to develop a simplified quality improvement publication pathway enabling a small research methodology group to increase quality improvement research throughout the institution. The key innovations of the pathway are horizontal integration of the quality improvement research methods group across the institution, implementation of a Lean quality improvement research pathway, and application of a just-in-time quality improvement research toolkit. This work provides a road map and tools for the acceleration of quality improvement research. At our institution, the Lean quality improvement research approach was associated with statistically significant increases in the number (annual mean increase from 3.0 to 8.5, p = .03) and breadth of published quality improvement research articles, and in the number of quality improvement research projects currently in process. Application of Lean methods to the quality improvement research process can aid in increasing publication of quality improvement articles from across the institution.

  11. Bevezetés a lean menedzsmentbe – a lean stratégiai alapjai = Introduction to lean management – basic strategic elements of lean

    OpenAIRE

    Losonci, Dávid

    2010-01-01

    A lean menedzsment az értékteremtő folyamatok stratégiai és operatív szintjének meghatározó formálójává vált az elmúlt évtizedekben. Jelen tanulmány stratégiai nézőpontból tárgyalja a lean menedzsment teljes bevezetését. Részletes áttekintést ad a Womack és Jones (2003) által lefektetett lean alapelvekről. Az operatív teljesítményjavulásból származó vevői értékteremtés mellett foglalkozik a tulajdonosi értékteremtéssel, az MRP és a lean szinergikus összekapcsolásával, valamint a lean ideális ...

  12. The Development Of A Theoretical Lean Culture Causal Framework To Support The Effective Implementation Of Lean In Automotive Component Manufacturers

    Directory of Open Access Journals (Sweden)

    Van der Merwe, Karl Robert

    2014-05-01

    Full Text Available Although it is generally accepted that lean manufacturing improves operational performance, many organisations are struggling to adapt to the lean philosophy. The purpose of this study is to contribute to a more effective strategy for implementing the lean manufacturing improvement philosophy. The study sets out both to integrate well-researched findings and theories related to generic organisational culture with more recent research and experience related to lean culture, and to examine the role that culture plays in the effective implementation of lean manufacturing principles and techniques. The ultimate aim of this exercise is to develop a theoretical lean culture causal framework.

  13. Lean for Government: Eliminating the Seven Wastes

    Science.gov (United States)

    Shepherd, Christena C.

    2012-01-01

    With shrinking budgets and a slow economy, it is becoming increasingly important for all government agencies to become more efficient. Citizens expect and deserve efficient and effective services from federal, state and local government agencies. One of the best methods to improve efficiency and eliminate waste is to institute the business process improvement methodologies known collectively as Lean; however, with reduced budgets, it may not be possible to train everyone in Lean or to engage the services of a trained consultant. It is possible, however, to raise awareness of the "Seven Wastes" of Lean in each employee, and encourage them to identify areas for improvement. Management commitment is vital to the success of these initiatives, and it is also important to develop the right metrics that will track the success of these changes.

  14. Contribution of Lean Management to Excellence

    Directory of Open Access Journals (Sweden)

    López-Fresno Palmira

    2014-11-01

    Full Text Available To continuously and systematically improve efficiency and efficacy of processes, organizations need the implication of all employees in continuous improvement and innovation through suitable Quality Management Programs (QMPs. Effectiveness of these programs is directly linked to the requirement employees understand the methodologies and tools used for QM and the benefits that will derivate from their implementation, individually and collectively, so they can commit and implicate. Lean Management is a friendly methodology to continuously and systematically achieve process improvement, so helping the organization seeking operational excellence that contributes to overall excellence. This paper identifies Critical Success Factors (CSFs for an effective implementation of QMPs, suggests Lean Management as an easy-to-understand, powerful and friendly methodology for operational excellence and overall excellence, and presents a case experience of implementation of Lean Management in a health care organization that applies the EFQM model, and the lessons learnt.

  15. Lean Start-up in Established Companies

    DEFF Research Database (Denmark)

    Goduscheit, René Chester

    2018-01-01

    Lean start-up is an emergent perspective on how entrepreneurs can bring new products and services to the market. This approach challenges the dominant role of lengthy business plans, linear product development processes, and seeking complete overview of the potential of the new products....../services before market launch. Instead it suggests that start-ups could benefit from a ‘minimum-viable product’ approach where products and services are launched when they contain critical features. The emphasis in the lean start-up approach is on business models rather than the elaborate business plan...... at the companies (strategy meetings, development workshops etc.). The aim is to shed light on the implications for companies that seek to employ lean start-up. These implications will be aimed at aspects like innovation management, organizational structure, customer relations etc....

  16. Theories of lean management: an empirical evaluation.

    Science.gov (United States)

    Handel, Michael J

    2014-03-01

    Debates within organization theory traditionally argued the relative merits of bureaucracy but today there is broad agreement across different perspectives that bureaucratic organization is inefficient and outmoded. Despite their differences, post-bureaucratic and neo-liberal theories argue that organizations with relatively flat hierarchies and low management overhead are better adapted to current market requirements. Post-bureaucratic theory also argues that employees, as well as firms, benefit from leaner management structures. This paper investigates trends in managerial leanness, proposed explanations for such trends, and the consequences of leanness for firms and employees. Although there is a trend toward flatter management hierarchies, there is only weak support for current claims regarding both the causes and consequences of lean management. Copyright © 2013 Elsevier Inc. All rights reserved.

  17. Waste Measurement Techniques For Lean Companies

    Directory of Open Access Journals (Sweden)

    Maciej Pieńkowski

    2014-12-01

    Full Text Available The paper is dedicated to answer the problem of measuring waste in companies, which are implementing Lean Manufacturing concept. Lack of complex identification, quantification an visualization of waste significantly impedes Lean transformation efforts. This problem can be solved by a careful investigation of Muda, Muri and Mura, which represent the essence of waste in the Toyota Production System. Measuring them facilitates complete and permanent elimination of waste in processes. The paper introduces a suggestion of methodology, which should enable company to quantify and visualize waste at a shop floor level.

  18. A Lean Six Sigma journey in radiology.

    Science.gov (United States)

    Bucci, Ronald V; Musitano, Anne

    2011-01-01

    The department of radiology at Akron Children's Hospital embarked on a Lean Six Sigma mission as part of a hospital wide initiative to show increased customer satisfaction, reduce employee dissatisfaction and frustration, and decrease costs. Three processes that were addressed were reducing the MRI scheduling back-log, reconciling discrepancies in billing radiology procedures, and implementing a daily management system. Keys to success is that managers provide opportunities to openly communicate between department sections to break down barriers. Executive leaders must be engaged in Lean Six Sigma for the company to be successful.

  19. The Lean and Global Start-up

    DEFF Research Database (Denmark)

    Tanev, Stoyan; Rasmussen, Erik Stavnsager

    For several decades researchers have studied start-up companies with a focus on international markets, suppliers and networks from their inception and on companies that are establishing new, agile business models. This has resulted in two streams of research: The Born Global and International New...... Ventures research and research with a focus on the Lean Start-up company. It is our intention in this paper to give a short presentation of the two research streams and show how they can be merged into one with a focus on newly established technology oriented firms that are lean and global from...

  20. Lean Transformation Guidance: Why Organizations Fail To Achieve and Sustain Excellence Through Lean Improvement

    OpenAIRE

    Mohammed Hamed Ahmed

    2013-01-01

    Many companies are complaining that lean didn’t achieve their long-term goals, and the improvement impact was very short-lived. 7 out of each 10 lean projects fail as companies try to use lean like a toolkit, copying and pasting the techniques without trying to adapt the employee’s culture, manage the improvement process, sustain the results, and develop their leaders. When the Toyota production system was created, the main goal was to remove wastes from the shop floor us...

  1. Development of framework for sustainable Lean implementation: an ISM approach

    Science.gov (United States)

    Jadhav, Jagdish Rajaram; Mantha, S. S.; Rane, Santosh B.

    2014-07-01

    The survival of any organization depends upon its competitive edge. Even though Lean is one of the most powerful quality improvement methodologies, nearly two-thirds of the Lean implementations results in failures and less than one-fifth of those implemented have sustained results. One of the most significant tasks of top management is to identify, understand and deploy the significant Lean practices like quality circle, Kanban, Just-in-time purchasing, etc. The term `bundle' is used to make groups of inter-related and internally consistent Lean practices. Eight significant Lean practice bundles have been identified based on literature reviewed and opinion of the experts. The order of execution of Lean practice bundles is very important. Lean practitioners must be able to understand the interrelationship between these practice bundles. The objective of this paper is to develop framework for sustainable Lean implementation using interpretive structural modelling approach.

  2. Lean Production and information technology : Connection or contradiction?

    NARCIS (Netherlands)

    Riezebos, Jan; Klingenberg, Warse; Hicks, Christian

    The principles of Lean Production have enabled organisations in the manufacturing and service sectors to significantly improve their competitiveness. The application of Lean principles, derived from the Toyota Production System has enabled many organisations to Simultaneously improve productivity,

  3. Lean Accounting - An Ingenious Solution for Cost Optimization

    OpenAIRE

    Dimi Ofileanu; Dan Ioan Topor

    2014-01-01

    The aim of this work is to present a new concept in accounting management: Lean Accounting. This work explains the way the lean concept was born; its benefits for the production system of the factories and the necessity of applying lean accounting in the factories which have implemented lean production, taking into account both its advantages and the boundaries of the other cost management methods in those factories.

  4. TH-C-9A-01: Lean Tools and Methods

    International Nuclear Information System (INIS)

    Rangaraj, D; Chan, K; Boddu, S; Pawlicki, T; Dieterich, S

    2014-01-01

    Lean thinking has revolutionized the manufacturing industry. Toyota has pioneered and leveraged this aspect of Lean thinking. Application of Lean thinking and Lean Six Sigma techniques into Healthcare and in particular in Radiation Oncology has its merits and challenges. To improve quality, safety and patient satisfaction with available resources or reducing cost in terms of time, staff and resources is demands of today's healthcare. Radiation oncology treatment involves many processes and steps, identifying and removing the non-value added steps in a process can significantly improve the efficiency. Real projects undertaken in radiation oncology department in cutting down the procedure time for MRI guided brachytherapy to 40% less using lean thinking will be narrated. Simple Lean tools and techniques such as Gemba walk, visual control, daily huddles, standard work, value stream mapping, error-proofing, etc. can be applied with existing resources and how that improved the operation in a Radiation Oncology department's two year experience will be discussed. Lean thinking focuses on identifying and solving the root-cause of a problem by asking “Why” and not “Who” and this requires a culture change of no blame. Role of leadership in building lean culture, employee empowerment and trains and develops lean thinkers will be presented. Why Lean initiatives fail and how to implement lean successfully in your clinic will be discussed. Learning Objectives: Concepts of lean management or lean thinking. Lean tools and techniques applied in Radiation Oncology. Implement no blame culture and focus on system and processes. Leadership role in implementing lean culture. Challenges for Lean thinking in healthcare

  5. Investigating employee resistance to Lean transformation: UK case study.

    OpenAIRE

    Bruce, J.; Scott, Philip; Roberts, Martyn

    2011-01-01

    Lean is a business process transformation approach that eliminates ‘wastes’ – activities that generate no value for the customer. Lean originated from the production line but is widely implemented in the service sector. This study investigates human and social factors in a Lean transformation in a ‘knowledge worker’ environment. We identify a paradox: a successful Lean programme in the service sector develops staff who are educated and empowered and thus potential opponents to future business...

  6. TH-C-9A-01: Lean Tools and Methods

    Energy Technology Data Exchange (ETDEWEB)

    Rangaraj, D [Baylor Scott and White Health, Temple, TX (United States); Chan, K [Princess Margaret Hospital, Toronto (Canada); Boddu, S [Temple, TX (United States); Pawlicki, T [UC San Diego, La Jolla, CA (United States); Dieterich, S [UC Davis Medical Center, Sacramento, CA (United States)

    2014-06-15

    Lean thinking has revolutionized the manufacturing industry. Toyota has pioneered and leveraged this aspect of Lean thinking. Application of Lean thinking and Lean Six Sigma techniques into Healthcare and in particular in Radiation Oncology has its merits and challenges. To improve quality, safety and patient satisfaction with available resources or reducing cost in terms of time, staff and resources is demands of today's healthcare. Radiation oncology treatment involves many processes and steps, identifying and removing the non-value added steps in a process can significantly improve the efficiency. Real projects undertaken in radiation oncology department in cutting down the procedure time for MRI guided brachytherapy to 40% less using lean thinking will be narrated. Simple Lean tools and techniques such as Gemba walk, visual control, daily huddles, standard work, value stream mapping, error-proofing, etc. can be applied with existing resources and how that improved the operation in a Radiation Oncology department's two year experience will be discussed. Lean thinking focuses on identifying and solving the root-cause of a problem by asking “Why” and not “Who” and this requires a culture change of no blame. Role of leadership in building lean culture, employee empowerment and trains and develops lean thinkers will be presented. Why Lean initiatives fail and how to implement lean successfully in your clinic will be discussed. Learning Objectives: Concepts of lean management or lean thinking. Lean tools and techniques applied in Radiation Oncology. Implement no blame culture and focus on system and processes. Leadership role in implementing lean culture. Challenges for Lean thinking in healthcare.

  7. Lean management in a non-manufacturing organization

    Directory of Open Access Journals (Sweden)

    Mladen Žvorc

    2013-12-01

    Full Text Available This paper examines the possibilities of a lean approach to non-manufacturing functions, i.e. a market-oriented organization. This refers to purchasing, shipment, storage, sale and delivery of goods; marketing, etc. A lean approach to business operations is discussed and several lean business methods are developed on the basis of which lean management can be used not only in manufacturing, but also in non-manufacturing organizations.

  8. Subcutaneous oxyntomodulin analogue administration reduces body weight in lean and obese rodents.

    Science.gov (United States)

    Liu, Y-L; Ford, H E; Druce, M R; Minnion, J S; Field, B C T; Shillito, J C; Baxter, J; Murphy, K G; Ghatei, M A; Bloom, S R

    2010-12-01

    To determine the efficacy of a long-acting oxyntomodulin (OXM) analogue, OXM6421, in inhibiting food intake and decreasing body weight in lean and diet-induced obese (DIO) rodents. The glucagon-like peptide-1 (GLP-1) receptor binding affinity and efficacy, sensitivity to enzymatic degradation in vitro and persistence in the circulation after peripheral administration were investigated for OXM6421 and compared with native OXM. The chronic effect of OXM6421 on food intake, body weight and energy expenditure was examined in lean rats, and its anti-obesity potential was evaluated in DIO mice. OXM6421 showed enhanced GLP-1 receptor binding affinity and cyclic adenosine monophosphate (cAMP) stimulation, and higher resistance to enzymatic degradation by dipeptidyl peptidase IV (DPP-IV) and neutral endopeptidase (NEP) compared with native OXM. OXM6421 persisted longer in the circulation than OXM after peripheral administration. Acute administration of OXM6421 potently inhibited food intake in lean rodents, with cumulative effects lasting up to 24 h. In lean rats, daily subcutaneous (s.c.) administration of OXM6421 caused greater weight loss than the pair-fed animals, and a higher rate of oxygen consumption than both the pair-fed and the saline controls. In DIO mice, continuous s.c. infusion of OXM6421 resulted in a significant weight loss, accompanied by an improvement in glucose homeostasis and an increase in circulating adiponectin levels. Once-daily s.c. administration of OXM6421 for 21 days caused sustained weight loss in DIO mice. OXM6421 induces negative energy balance in both lean and obese rodents, suggesting that long-acting OXM analogues may represent a potential therapy for obesity.

  9. Effect of selection for lean growth on gonadal development of ...

    African Journals Online (AJOL)

    A primary objective of commercial pig production is lean meat yield in order to satisfy consumer needs. The majority of the commercial pig breeds in South Africa have been selected for high lean growth potential and reduced backfat thickness. There are indications that selection for high lean meat yield may affect the ...

  10. Using Simulation to Explore Lean Manufacturing Implementation Strategies

    Science.gov (United States)

    Shannon, Patrick W.; Krumwiede, Kip R.; Street, Jeffrey N.

    2010-01-01

    Lean manufacturing, an outgrowth of the Toyota Production System, has spread far beyond the automobile industry and is seen by many leaders as a key management philosophy in the battle to compete on an international scale. Successful implementation of lean requires that managers and employees be educated in the proper application of lean tools and…

  11. Når lean organiserer på hospitalet

    DEFF Research Database (Denmark)

    Hauge, Amalie Martinus

    Lean er kendt og anvendt af mange offentlige organisationer i Danmark. Selv om Leans anvendelighed de fleste steder er slået fast, bliver Lean imidlertid ved med at udfordre og skabe konflikt. Hvorfor det? Dette spørgsmål – og mange andre – bliver belyst i denne rapport, som er baseret på en Ph...

  12. Reducing waste in administrative services with lean principles

    NARCIS (Netherlands)

    Wijnhoven, Alphonsus B.J.M.; Beckers, David; Amrit, Chintan Amrit

    2016-01-01

    In the last few decades, lean techniques have been developed for removing with waste in manufacturing. More recently, lean is used outside the manufacturing context as well. This article focuses on using lean thinking for reducing waste in administrative services, i.e., business services with

  13. Teaching Special Decisions in a Lean Accounting Environment

    Science.gov (United States)

    Haskin, Daniel

    2010-01-01

    Lean accounting has become increasingly important as more and more companies adopt the lean enterprise model or some variation of it. Cost and managerial accounting textbooks continue to use, almost exclusively, models based on standard overhead absorption, which if used in a lean environment will not accurately reflect the benefits from the…

  14. Application of lean thinking to health care: issues and observations

    Science.gov (United States)

    Joosten, Tom; Bongers, Inge; Janssen, Richard

    2009-01-01

    Background Incidents and quality problems are a prime cause why health care leaders are calling to redesign health care delivery. One of the concepts used is lean thinking. Yet, lean often leads to resistance. Also, there is a lack of high quality evidence supporting lean premises. In this paper, we present an overview of lean thinking and its application to health care. Development, theory and application of lean thinking to health care Lean thinking evolved from a tool designed to improve operational shop-floor performance at an automotive manufacturer to a management approach with both operational and sociotechnical aspects. Sociotechnical dynamics have until recently not received much attention. At the same time a balanced approach might lead to a situation where operational and sociotechnial improvements are mutually reinforcing. Application to health care has been limited and focussed mainly on operational aspects using original lean tools. A more integrative approach would be to pay more attention to sociotechnical dynamics of lean implementation efforts. Also, the need to use the original lean tools may be limited, because health care may have different instruments and tools already in use that are in line with lean thinking principles. Discussion We believe lean thinking has the potential to improve health care delivery. At the same time, there are methodological and practical considerations that need to be taken into account. Otherwise, lean implementation will be superficial and fail, adding to existing resistance and making it more difficult to improve health care in the long term. PMID:19696048

  15. Lean-team effectiveness through leader values and members’ informing

    NARCIS (Netherlands)

    van Dun, Desirée Hermina; Wilderom, Celeste P.M.

    2016-01-01

    Purpose Although empirical tests of effective lean-team leadership are scarce, leaders are often blamed when lean work-floor initiatives fail. In the present study, a lean-team leader’s work values are assumed to affect his or her team members’ behaviors and, through them, to attain team

  16. Cull sow knife-separable lean content evaluation at harvest and lean mass content prediction equation development.

    Science.gov (United States)

    Abell, Caitlyn E; Stalder, Kenneth J; Hendricks, Haven B; Fitzgerald, Robert F

    2012-07-01

    The objectives of this study were to develop a prediction equation for carcass knife-separable lean within and across USDA cull sow market weight classes (MWC) and to determine carcass and individual primal cut knife separable lean content from cull sows. There were significant percent lean and fat differences in the primal cuts across USDA MWC. The two lighter USDA MWC had a greater percent carcass lean and lower percent fat compared to the two heavier MWC. In general, hot carcass weight explained the majority of carcass lean variation. Additionally, backfat was a significant variation source when predicting cull sow carcass lean. The findings support using a single lean prediction equation across MWC to assist processors when making cull sow purchasing decisions and determine the mix of animals from various USDA MWC that will meet their needs when making pork products with defined lean:fat content. Copyright © 2012 Elsevier Ltd. All rights reserved.

  17. Myocutaneous revascularization following graded ischemia in lean and obese mice

    Directory of Open Access Journals (Sweden)

    Clark RM

    2016-09-01

    Full Text Available Ross M Clark,1 Brittany Coffman,2 Paul G McGuire,3 Thomas R Howdieshell1,3 1Department of Surgery, 2Department of Pathology, 3Department of Cell Biology and Vascular Physiology, University of New Mexico Health Sciences Center, Albuquerque, NM, USA Background: Murine models of diabetes and obesity have provided insight into the pathogenesis of impaired epithelialization of excisional skin wounds. However, knowledge of postischemic myocutaneous revascularization in these models is limited. Materials and methods: A myocutaneous flap was created on the dorsum of wild type (C57BL/6, genetically obese and diabetic (ob/ob, db/db, complementary heterozygous (ob+/ob− , db+/db−, and diet-induced obese (DIO mice (n=48 total; five operative mice per strain and three unoperated mice per strain as controls. Flap perfusion was documented by laser speckle contrast imaging. Local gene expression in control and postoperative flap tissue specimens was determined by quantitative reverse transcription polymerase chain reaction (RT-PCR. Image analysis of immunochemically stained histologic sections confirmed microvascular density and macrophage presence. Results: Day 10 planimetric analysis revealed mean flap surface area necrosis values of 10.8%, 12.9%, 9.9%, 0.4%, 1.4%, and 23.0% for wild type, db+/db−, ob+/ob−, db/db, ob/ob, and DIO flaps, respectively. Over 10 days, laser speckle imaging documented increased perfusion at all time points with revascularization to supranormal perfusion in db/db and ob/ob flaps. In contrast, wild type, heterozygous, and DIO flaps displayed expected graded ischemia with failure of perfusion to return to baseline values. RT-PCR demonstrated statistically significant differences in angiogenic gene expression between lean and obese mice at baseline (unoperated and at day 10. Conclusion: Unexpected increased baseline skin perfusion and augmented myocutaneous revascularization accompanied by a control proangiogenic transcriptional

  18. Healthy aging diets other than the Mediterranean: a focus on the Okinawan diet.

    Science.gov (United States)

    Willcox, Donald Craig; Scapagnini, Giovanni; Willcox, Bradley J

    2014-01-01

    The traditional diet in Okinawa is anchored by root vegetables (principally sweet potatoes), green and yellow vegetables, soybean-based foods, and medicinal plants. Marine foods, lean meats, fruit, medicinal garnishes and spices, tea, alcohol are also moderately consumed. Many characteristics of the traditional Okinawan diet are shared with other healthy dietary patterns, including the traditional Mediterranean diet, DASH diet, and Portfolio diet. All these dietary patterns are associated with reduced risk for cardiovascular disease, among other age-associated diseases. Overall, the important shared features of these healthy dietary patterns include: high intake of unrefined carbohydrates, moderate protein intake with emphasis on vegetables/legumes, fish, and lean meats as sources, and a healthy fat profile (higher in mono/polyunsaturated fats, lower in saturated fat; rich in omega-3). The healthy fat intake is likely one mechanism for reducing inflammation, optimizing cholesterol, and other risk factors. Additionally, the lower caloric density of plant-rich diets results in lower caloric intake with concomitant high intake of phytonutrients and antioxidants. Other shared features include low glycemic load, less inflammation and oxidative stress, and potential modulation of aging-related biological pathways. This may reduce risk for chronic age-associated diseases and promote healthy aging and longevity. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  19. Lean Transformation Guidance: Why Organizations Fail To Achieve and Sustain Excellence Through Lean Improvement

    Directory of Open Access Journals (Sweden)

    Mohammed Hamed Ahmed

    2013-06-01

    Full Text Available Many companies are complaining that lean didn’t achieve their long-term goals, and the improvement impact was very short-lived. 7 out of each 10 lean projects fail as companies try to use lean like a toolkit, copying and pasting the techniques without trying to adapt the employee’s culture, manage the improvement process, sustain the results, and develop their leaders. When the Toyota production system was created, the main goal was to remove wastes from the shop floor using some lean techniques and tools. What was not clear is that this required from Toyota a long process of leadership development, and a high commitment to training and coaching their employee. A Failure to achieve and sustain the improvement is a problem of both management and leadership as well as the improper understanding of the human behavior, and the required culture to success.

  20. The effects of short-term overfeeding on insulin action in lean and reduced-obese individuals.

    Science.gov (United States)

    Cornier, Marc-Andre; Bergman, Bryan C; Bessesen, Daniel H

    2006-09-01

    Insulin resistance is clearly associated with obesity. However, the role of excess energy intake per se as opposed to increased fat mass in the development of insulin resistance has not been clearly defined. It may be that the nutrient load provided by short-term overfeeding is sufficient to induce measurable changes in insulin action in skeletal muscle and the liver. We examined the effects of 3 days of overfeeding on insulin action and glucose kinetics in 13 lean (body mass index, 20.9 +/- 2.4 kg/m(2); 6 men, 7 women) and 9 reduced-obese (RO) (body mass index, 29.1 +/- 2.2 kg/m(2); 4 men, 5 women) individuals. A two-step euglycemic hyperinsulinemic clamp study (5 and 40 mU m(-2) min(-1)) with a primed, constant infusion of [6,6-(2)H(2)]glucose was performed after 3 days of a weight-maintenance diet and again after 3 days of overfeeding by 50% (50% carbohydrate, 30% fat, 20% protein). At baseline, lean individuals were more insulin sensitive, as measured by glucose infusion rate, than RO individuals (12.08 +/- 0.8 vs 7.62 +/- 1.0 mg x kg(-1) x min(-1), P lean women being more insulin sensitive than lean men (P lean women (13.37 +/- 1.3 to 11.42 +/- 1.0 mg x kg(-1) x min(-1), P lean men or RO individuals. Basal and insulin-stimulated glucose disposal remained unchanged with overfeeding in all groups. Low-dose insulin suppression of endogenous glucose production was impaired after overfeeding in lean women (euenergetic, 1.92 +/- 0.36 to 0.36 +/- 0.16 mg x kg(-1) x min(-1); overfeeding: 2.13 +/- 0.17 to 0.86 +/- 0.12 mg x kg(-1) x min(-1); P = .04) but remained unchanged in the other groups. These findings demonstrate that insulin action is reduced in lean, obese-resistant women after short-term overfeeding primarily because of an inhibition of insulin-mediated suppression of endogenous glucose production, whereas short-term overfeeding does not appear to effect insulin action in lean men and RO individuals. This response may be indirectly involved in the ability of

  1. Systems Thinking, Lean Production and Action Learning

    Science.gov (United States)

    Seddon, John; Caulkin, Simon

    2007-01-01

    Systems thinking underpins "lean" management and is best understood through action-learning as the ideas are counter-intuitive. The Toyota Production System is just that--a system; the failure to appreciate that starting-place and the advocacy of "tools" leads many to fail to grasp what is, without doubt, a significant…

  2. Lean leiderschap voor (nog) betere teamprestaties

    NARCIS (Netherlands)

    van Dun, Desirée Hermina; Wilderom, Celeste P.M.

    2016-01-01

    Veel managers en teams hebben moeite om continu te blijven verbeteren. Recent onderzoek van de Universiteit Twente laat zien dat er bij het toepassen van lean meer aandacht nodig is voor gedragsontwikkeling van zowel medewerkers als leidinggevenden. Managers met bepaalde gedragskenmerken creëren een

  3. Simulation of lean premixed turbulent combustion

    International Nuclear Information System (INIS)

    Bell, J; Day, M; Almgren, A; Lijewski, M; Rendleman, C; Cheng, R; Shepherd, I

    2006-01-01

    There is considerable technological interest in developing new fuel-flexible combustion systems that can burn fuels such as hydrogen or syngas. Lean premixed systems have the potential to burn these types of fuels with high efficiency and low NOx emissions due to reduced burnt gas temperatures. Although traditional Scientific approaches based on theory and laboratory experiment have played essential roles in developing our current understanding of premixed combustion, they are unable to meet the challenges of designing fuel-flexible lean premixed combustion devices. Computation, with its ability to deal with complexity and its unlimited access to data, has the potential for addressing these challenges. Realizing this potential requires the ability to perform high fidelity simulations of turbulent lean premixed flames under realistic conditions. In this paper, we examine the specialized mathematical structure of these combustion problems and discuss simulation approaches that exploit this structure. Using these ideas we can dramatically reduce computational cost, making it possible to perform high-fidelity simulations of realistic flames. We illustrate this methodology by considering ultra-lean hydrogen flames and discuss how this type of simulation is changing the way researchers study combustion

  4. Ares Launch Vehicles Lean Practices Case Study

    Science.gov (United States)

    Doreswamy, Rajiv; Self, Timothy A.

    2007-01-01

    The Ares launch vehicles team, managed by the Ares Projects Office (APO) at NASA Marshall Space Flight Center, has completed the Ares I Crew Launch Vehicle System Requirements Review and System Definition Review and early design work for the Ares V Cargo Launch Vehicle. This paper provides examples of how Lean Manufacturing, Kaizen events, and Six Sigma practices are helping APO deliver a new space transportation capability on time and within budget, while still meeting stringent technical requirements. For example, Lean philosophies have been applied to numerous process definition efforts and existing process improvement activities, including the Ares I-X test flight Certificate of Flight Readiness (CoFR) process, risk management process, and review board organization and processes. Ares executives learned Lean practices firsthand, making the team "smart buyers" during proposal reviews and instilling the team with a sense of what is meant by "value-added" activities. Since the goal of the APO is to field launch vehicles at a reasonable cost and on an ambitious schedule, adopting Lean philosophies and practices will be crucial to the Ares Project's long-term SUCCESS.

  5. Lean Six Sigma: Stap voor stap

    NARCIS (Netherlands)

    Does, R.J.M.M.; de Koning, H.; de Mast, J.

    2008-01-01

    Lean Six Sigma is de culminatie van ontwikkelingen in kwaliteitsverbetering in de 20ste eeuw. Het combineert belangrijke principes en technieken in een goed gestructureerde en geïntegreerde benadering. Het belichaamt wetenschappelijke inzichten over onderzoeksmethodologie, management en economie. In

  6. Lean leadership and change management skills

    NARCIS (Netherlands)

    Frank Willems

    2013-01-01

    Gastcollege Masteropleiding MIM Tilburg University/TiasNimbas Business School op 17 & 18 mei 2013. • Basic principles of Change Management • Group practice • TheoryU and Social Networking theory as framework for Leadership • Theory about Lean thinking as a method for improving Leadership skills and

  7. Lean approaches in a knowledge worker environment

    CSIR Research Space (South Africa)

    Christelis, L

    2012-08-01

    Full Text Available Most of us are familiar with the concept of Lean (a way to do more and more with less and less). The principles have been applied by the Japanese as part of the Toyota Production System from as early as the 1950's. Subsequently many have applied...

  8. Lean and Agile: An Epistemological Reflection

    Science.gov (United States)

    Browaeys, Marie-Joelle; Fisser, Sandra

    2012-01-01

    Purpose: The aim of the paper is to contribute to the discussion of treating the concepts of lean and agile in isolation or combination by presenting an alternative view from complexity thinking on these concepts, considering an epistemological approach to this topic. Design/methodology/approach: The paper adopts an epistemological approach, using…

  9. Implementing Lean Six Sigma in organizations

    NARCIS (Netherlands)

    Lameijer, B.A.

    2017-01-01

    This thesis focuses on operational excellence following the Lean Six Sigma (LSS) method. As the popularity of implementing LSS grows, questions about implementing LSS in organizations arise, and this is where we aim to contribute. We study key questions about implementing LSS in organizations at two

  10. Modelling green and lean supply chains

    DEFF Research Database (Denmark)

    Govindan, Kannan; Carvalho, Helena; Azevedo, Susana G.

    2017-01-01

    This manuscript proposes a model to support decision making and to help managers identify the best set of green and lean supply chain management practices to improve their eco-efficiency. To attain this objective, a mathematical model based on eco-efficiency concepts is suggested to overcome...... a strategic framework to support the design of eco-efficient supply chains....

  11. Implementing lean in a surgical ward

    DEFF Research Database (Denmark)

    Edwards, Kasper; Nielsen, Anders Paarup; Jacobsen, Peter

    be planned (in detail) in advance. The remaining operating rooms are allocated to this flow and there have been no significant changes to the organization of work in these theaters. Lean management is derived from the Toyota production system and is a comprehensive system of tools and techniques...

  12. Performance management practices in lean manufacturing organizations

    NARCIS (Netherlands)

    Bellisario, Andrea; Pavlov, Andrey

    2018-01-01

    This paper provides the first systematic look into the existing research on performance management (PM) practices employed in lean manufacturing organisations (LMOs). It adopts a systematic review method to examine the evidence generated in the period 2004 – 2015 and uses a comprehensive PM

  13. Lean planning and control : principles and practice

    NARCIS (Netherlands)

    Riezebos, Jan; Suer, Gursel; Gen, Mitsuo

    2018-01-01

    A basic characteristic of lean, agile, and responsive production systems are the use of teams instead of functional departments. Another characteristic is the use of rather simple shop floor control methods to manage the flow of orders. The shop floor control methods provide robust and visual

  14. Personality characteristics of excellent lean managers

    DEFF Research Database (Denmark)

    Steendahl Nielsen, Jacob; Boer, Harry; Lindgren, Peter

    2016-01-01

    Today many Danish companies are implementing Lean and hereby trying to implement a continuous improvement (CI) program and culture. We have observed that companies can easily implement the artifacts of CI, such as Kaizen boards, Kaizen meetings, Performance management (KPI), A3 and PDCA reports...

  15. Lowlands sociotechnical design theory and lean production

    NARCIS (Netherlands)

    Christis, Jac; Soepenberg, Erik; Mohr, Bernard J.; van Amelsvoort, Pierre

    2015-01-01

    Lean Production (LP) can be regarded as a design approach in search of a theoretical foundation. In this paper we show that Lowlands’ Sociotechnical Design Theory (STSL) could function as such a foundation. To reach this goal, we first describe STSL as a system theoretical reformulation of Original

  16. Measuring lean implementation for maintenance service companies

    NARCIS (Netherlands)

    de Jong, Stephan J.; Beelaerts van Blokland, W.W.A.

    2016-01-01

    Purpose – Implementation of lean manufacturing is currently performed in the production industry; however, for the airline maintenance service industry, it is still in its infancy. Indicators such as work in process, cycle time, on-time performance and inventory are useful indicators to measure

  17. The Scientific Underpinning of Lean Six Sigma

    NARCIS (Netherlands)

    Does, R.J.M.M.; de Mast, J.; de Koning, H.; Bisgaard, S.

    2007-01-01

    The twentieth century saw an incredible development of professional organizations. The impact of technological advances is obvious, but besides these, innovations in management structures and methods have resulted in the highly productive organizations of today. Lean Six Sigma is not revolutionary.

  18. Lean Six Sigma for Service and Healthcare

    NARCIS (Netherlands)

    de Mast, J.; Does, R.J.M.M.; de Koning, H.

    2006-01-01

    Lean Six Sigma is built on principles and methods that have proven themselves over the twentieth century. It has incorporated the most effective approaches and integrated them into a full programme. It offers a management structure for organizing continuous improvement of routine tasks, such as

  19. Lean Sygehuset - del I: En patienthistorie

    DEFF Research Database (Denmark)

    Laursen, Martin Lindgaard; Gertsen, Frank

    Denne forskningsrapport introducerer et forskningsprojekt baseret på case studier af Lean principper anvendt på Skejby sygehus. Operationelle udfordringer i sygehusets arbejdsgange illustreres gennem et observeret patientforløb. Disse udfordringer, et oprids af sygehusenes vilkår, og gennemgang af...

  20. Lean automation development : applying lean principles to the automation development process

    OpenAIRE

    Granlund, Anna; Wiktorsson, Magnus; Grahn, Sten; Friedler, Niklas

    2014-01-01

    By a broad empirical study it is indicated that automation development show potential of improvement. In the paper, 13 lean product development principles are contrasted to the automation development process and it is suggested why and how these principles can facilitate, support and improve the automation development process. The paper summarises a description of what characterises a lean automation development process and what consequences it entails. Main differences compared to current pr...

  1. Leveraging lean in the office: Lean office needs a novel and differentiated approach

    OpenAIRE

    Rüttimann, Bruno G.; Fischer, Urs P.; Stöckli, Martin T.

    2014-01-01

    Lean Six Sigma tools have been increasingly employed also in the service industry, however with different success as field studies have shown. The reason not only has to be attributed to a poor Change Management, but can also be attributed to the intrinsic characteristics of the Lean techniques, which have been tailored to sustain a stable customer-takted pull-manufacturing principle. An office workplace shows significant differences to a procedural shop floor environment, as it comprises bot...

  2. Ketogenic diet

    Directory of Open Access Journals (Sweden)

    Tina Bregant

    2009-04-01

    conclusions This review traces a history of ketogenic diet, reviews its uses and side effects, and discusses possible alternatives and the diet’s possible mechanisms of action. We show how to use the diet in practice. Protocol and calculations are presented. We look toward possible future uses of the ketogenic diet, since it is efficient, under doctor’s supervison safe, but very demanding, additional treatment.

  3. TOWARDS GREEN THROUGH LEAN/LEAN SIX SIGMA APPROACHES: A LITERATURE REVIEW AT SERVICE INDUSTRY

    Directory of Open Access Journals (Sweden)

    RODRIGO GOYANNES GUSMÃO CAIADO

    2017-08-01

    Full Text Available In the last decades, sustainable development have increasingly gained importance to service industry and lean/Six Sigma approaches are becoming more and more outstanding in order to improve sustainability performance. In the post-modern era the integration between those approaches are necessary in order to aid organisations to balance the need for operational efficiency in their production and service systems with environmental commitment and social fairness. Because of that, Lean Six Sigma practices are progressively becoming widespread in studies about service, as way to improve quality, efficiency, effectiveness and sustainability of services. The purpose of this paper is to critically review the Lean and Lean Six Sigma (L6σ methodologies and highlight their importance to achieve sustainable development in service industry. To do this, a systematic literature review (SLR of the subjects under investigation was conducted. We examine the compatibility and divergences of the green, lean and Six Sigma concepts and implications regarding its sustainable implementation in service industry. The study has two major contributions. First, it is one of the first researches that investigate the potential benefits of integrating green, lean and Six Sigma in service sector. Second, it supports and expands current literature, providing both academicians and practitioners a better panorama to understand the present status of L6σ for achieving sustainability in service sector.

  4. Intermittent hypoxia induces hyperlipidemia in lean mice.

    Science.gov (United States)

    Li, Jianguo; Thorne, Laura N; Punjabi, Naresh M; Sun, Cheuk-Kwan; Schwartz, Alan R; Smith, Philip L; Marino, Rafael L; Rodriguez, Annabelle; Hubbard, Walter C; O'Donnell, Christopher P; Polotsky, Vsevolod Y

    2005-09-30

    Obstructive sleep apnea, a syndrome leading to recurrent intermittent hypoxia (IH), has been associated previously with hypercholesterolemia, independent of underlying obesity. We examined the effects of experimentally induced IH on serum lipid levels and pathways of lipid metabolism in the absence and presence of obesity. Lean C57BL/6J mice and leptin-deficient obese C57BL/6J-Lep(ob) mice were exposed to IH for five days to determine changes in serum lipid profile, liver lipid content, and expression of key hepatic genes of lipid metabolism. In lean mice, exposure to IH increased fasting serum levels of total cholesterol, high-density lipoprotein (HDL) cholesterol, phospholipids (PLs), and triglycerides (TGs), as well as liver TG content. These changes were not observed in obese mice, which had hyperlipidemia and fatty liver at baseline. In lean mice, IH increased sterol regulatory element binding protein 1 (SREBP-1) levels in the liver, increased mRNA and protein levels of stearoyl-coenzyme A desaturase 1 (SCD-1), an important gene of TG and PL biosynthesis controlled by SREBP-1, and increased monounsaturated fatty acid content in serum, which indicated augmented SCD-1 activity. In addition, in lean mice, IH decreased protein levels of scavenger receptor B1, regulating uptake of cholesterol esters and HDL by the liver. We conclude that exposure to IH for five days increases serum cholesterol and PL levels, upregulates pathways of TG and PL biosynthesis, and inhibits pathways of cholesterol uptake in the liver in the lean state but does not exacerbate the pre-existing hyperlipidemia and metabolic disturbances in leptin-deficient obesity.

  5. Six sigma and lean production adoption in a manufacturing company

    Directory of Open Access Journals (Sweden)

    Alisson Christian Scheller

    2014-11-01

    Full Text Available The connection among Lean Production with Six Sigma originated the Lean Six Sigma methodology, focused on processes variation and waste reduction. This methodology was developed on different ways in the companies and there is no consensus over its structure and its implementation. In this context, this paper aims to identify and analyze the main characteristics on the adoption and integration of Lean Six Sigma methodology through a case study conducted in a manufacturing company that adopts lean production and six sigma. The results show two important aspects of the Lean Six Sigma methodology. One of them is the adoption of the value stream mapping as a central tool on Lean Six Sigma. The other is the use of DMAIC for improvements actions. The study indicates that despite the difficulties on Lean Six Sigma implementation, the methodology offers benefits to the company that adopts it in the suitable way.

  6. The Hybrid Lean System to Improve Manufacturing Environment

    Directory of Open Access Journals (Sweden)

    Ahmad Ahmad Nur Aizat

    2017-01-01

    Full Text Available Lean manufacturing is a systematic approch could increase manufacturing competitiveness by identifying and elminating waste through lean tools. However, these tools are often categorized into different groups, continues to be difficult for companies to select the most appropriate lean tool to be adopted, especially in respect of the SMEs whose knowledge of lean tools and associated principles are limited. This study is to propose solution on how to implement appropriate lean tools in food manufacturing industry located at Rengit, Johor. Qualitative method is used as a methodology to see the changes after the implementation of lean tools. Interview session also a part of method to collect data from respondents. The finding from this paper shows that implementation of an appropriate lean tool will help to eliminate waste in industry sector, maintain and control the inventory, improve quality of the product and improve overall operational process.

  7. Diverticulitis Diet

    Science.gov (United States)

    ... Examples of items allowed on a clear liquid diet include: Broth Fruit juices without pulp, such as apple juice Ice chips ... and poultry Refined white bread Fruit and vegetable juice with no ... two or three days of starting the diet and antibiotics. If you haven't started feeling ...

  8. Developing A Strategy to Enact Lean

    Directory of Open Access Journals (Sweden)

    Nicola Morrey

    2013-01-01

    Full Text Available This paper explains the strategy employed by a case study company to implement lean across the business, and to reflect on the success of this approach so other companies may consider this learning and how it might be useful to them. The strategy to enact lean in the case study company was based on creating a number of standard tools/ways of working. These tools can be considered to be standardised work for key aspects of the construction process that the company undertakes. The aim of the tools was to ensure that critical tasks would be carried out to the correct standard (quality, time, cost, health and safety every time, across the business. Achievement of this is expected to lead to improved performance and elimination of variation (waste. To implement this strategy of using standardised work to eliminate variation and lead to improved performance, a step-by-step process was developed to create the tools/standardised work. The paper describes the process that was undertaken and how it aimed to not only produce a number of tools/standardised work, but also to involve people and managers from across the business such that lean philosophy and thinking might also begin to become embedded. The paper will firstly explain, with reference to the relevant literature, how and why the strategy to implement standardised work was chosen, the process that was defined to develop the standardised work, and what happened when that process was put into practice. The findings of the paper show that whilst the completed tools delivered business benefits, the development of the tools did not follow the planned process. The paper discusses how people within the business responded to this strategy and how the process had to be continuously adapted to cope with the current business environment and path dependencies, further evidencing that lean implementations need to be tailored to suit the needs of the individual firm, rather than there being a one size fits all

  9. Food production and nature conservation

    NARCIS (Netherlands)

    Gordon, Iain J.; Squire, Geoff R.; Prins, Herbert H.T.

    2016-01-01

    Feeding the world's growing human population is increasingly challenging, especially as more people adopt a western diet and lifestyle. Doing so without causing damage to nature poses an even greater challenge. This book argues that in order to create a sustainable food supply whilst conserving

  10. Post-weaning high-fat diet results in growth cartilage lesions in young male rats.

    Directory of Open Access Journals (Sweden)

    Samuel S Haysom

    Full Text Available To determine if a high-fat diet (HF from weaning would result in a pro-inflammatory state and affect joint cartilage, we fed male rats either HF or Chow diet post-weaning, and voluntary wheel exercise (EX or cage only activity (SED after 9 weeks of age. At 17 weeks body composition, plasma biomarkers and histomorphology scores of femoro-tibial cartilages of HF-SED, HF-EX, Chow-SED and Chow-EX groups were compared. Food intake and activity were not significantly different between groups. HF diet resulted in significantly higher weight gain, %fat, fat:lean ratio, and plasma leptin, insulin and TNFα concentrations, with significant interactions between diet and exercise. No abnormal features were detected in the hyaline articular cartilage or in the metaphyseal growth plate in all four groups. However, collagen type X- positive regions of retained epiphyseal growth cartilage (EGC was present in all HF-fed animals and significantly greater than that observed in Chow-fed sedentary rats. Most lesions were located in the lateral posterior aspect of the tibia and/or femur. The severity of lesions was greater in HF-fed animals. Although exercise had a significantly greater effect in reducing adiposity and associated systemic inflammation in HF-fed rats, it had no effect on lesion incidence or severity. Lesion incidence was also significantly associated with indices of obesity and plasma markers of chronic inflammation. Clinically, EGC lesions induced by HF feeding in rats from very early in life, and possibly by insufficient activity, is typical of osteochondrosis in animals. Such lesions may be the precursor of juvenile osteochondritis dissecans requiring surgery in children/adolescents, conservative management of which could benefit from improved understanding of early changes in cellular and gene expression.

  11. Lean Strategies in the Operating Room.

    Science.gov (United States)

    Robinson, Stephen T; Kirsch, Jeffrey R

    2015-12-01

    Lean strategies can be readily applied to health care in general and operating rooms specifically. The emphasis is on the patient as the customer, respect and engagement of all providers, and leadership from management. The strategy of lean is to use continuous improvement to eliminate waste from the care process, leaving only value-added activities. This iterative process progressively adds the steps of identifying the 7 common forms of waste (transportation, inventory, motion, waiting, overproduction, overprocessing, and defects), 5S (sort, simplify, sweep, standardize, sustain), visual controls, just-in-time processing, level-loaded work, and built-in quality to achieve the highest quality of patient care. Copyright © 2015 Elsevier Inc. All rights reserved.

  12. Network model of project "Lean Production"

    Science.gov (United States)

    Khisamova, E. D.

    2018-05-01

    Economical production implies primarily new approaches to culture of management and organization of production and offers a set of tools and techniques that allows reducing losses significantly and making the process cheaper and faster. Economical production tools are simple solutions that allow one to see opportunities for improvement of all aspects of the business, to reduce losses significantly, to constantly improve the whole spectrum of business processes, to increase significantly the transparency and manageability of the organization, to take advantage of the potential of each employee of the company, to increase competitiveness, and to obtain significant economic benefits without making large financial expenditures. Each of economical production tools solves a specific part of the problems, and only application of their combination will allow one to solve the problem or minimize it to acceptable values. The research of the governance process project "Lean Production" permitted studying the methods and tools of lean production and developing measures for their improvement.

  13. ["Lean management" in hospitals: potentials and limitations].

    Science.gov (United States)

    Glossmann, J P; Schliebusch, O; Diehl, V; Walshe, R

    2000-08-15

    Little attention has yet been payed on establishing modern and competitive organizational structures in German hospitals. In this paper, we attempt to apply elements of lean management to the work of physicians working in an inpatient setting. Traditional ways of communication and their disadvantages are discussed. These include loss of motivation, bureaucratic structures and a lack of interdisciplinary cooperation. Using Maslow's theory of motivation, possible improvements are discussed, such as the reduction of restrictive job characteristics, an increase of physicians' spheres of competence and the use of their innovative potentials. These suggestions are explained using practical examples. The aim of the study is to contribute to quality management in hospitals by increasing personal responsibilities according to lean management.

  14. Conservation Value

    OpenAIRE

    Tisdell, Clement A.

    2010-01-01

    This paper outlines the significance of the concept of conservation value and discusses ways in which it is determined paying attention to views stemming from utilitarian ethics and from deontological ethics. The importance of user costs in relation to economic decisions about the conservation and use of natural resources is emphasised. Particular attention is given to competing views about the importance of conserving natural resources in order to achieve economic sustainability. This then l...

  15. Simulation-enhanced lean design process

    Directory of Open Access Journals (Sweden)

    Jon H. Marvel

    2009-07-01

    Full Text Available 72 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A traditional lean transformation process does not validate the future state before implementation, relying instead on a series of iterations to modify the system until performance is satisfactory. An enhanced lean process that includes future state validation before implementation is presented.  Simulation modeling and experimentation is proposed as the primary validation tool.  Simulation modeling and experimentation extends value stream mapping to include time, the behavior of individual entities, structural variability, random variability, and component interaction effects. Experiments to analyze the model and draw conclusions about whether the lean transformation effectively addresses the current state gap can be conducted.  Industrial applications of the enhanced lean process show it effectiveness.

  16. Where lean construction and value management meet

    OpenAIRE

    Musa, MM; Pasquire, C; Hurst, A

    2016-01-01

    The lean construction (LC) community’s key vision and goal is to provide value, yet they are increasingly challenged with understanding and dealing with the concept of value, with reports that value is one of the weakest points. Regardless of the previous studies and contributions already made on the concept of value in LC, the absence of a consistent understanding of value has resulted in misperceptions and indistinct boundaries with other construction value-related disciplines. Without a co...

  17. Lean Production Practices to Enhance Organisational Performance

    Directory of Open Access Journals (Sweden)

    Shah Satya

    2017-01-01

    Full Text Available Service sector organisations are constantly overcoming the challenges facing the over-production and waste reduction within their environments. Industries are also becoming very competitive thus forcing them to seek suitable production organisation strategies with the aim towards enhancing their competitiveness and efficiency. The aim of this research study is to investigate the impact of lean production practices on the performance of service based businesses through the case study of a local baked goods supplier. The research framework adopted consists of questionnaire survey method implemented with different end users, thus covering the overall production – retail – customer cycle. The research results and analysis justify the objective of the research that lean production practices enhance the performance of the supplier company and the common tool identified were JIT (Just in Time, Value Steam Mapping (VSP and the 5S methods. The results also suggest that JIT method has a higher impact towards improvement on performance relating to quality, speed, dependability, flexibility and cost of the supplier. However, the research study also identifies that one of the major challenges faced by the organisation while adopting lean practices was the lack of commitment from top management, continuous training and employee engagement measures.

  18. Managing Waste Throughout Lean-Green Perspective

    Directory of Open Access Journals (Sweden)

    Lamyaa Mohammed Dawood

    2017-11-01

    Full Text Available Managing waste has been known as a crucial need as it may reduce resource consumption, rigid regulations regarded to the environment and occupational health and safety. Lean and green management are two approaches of management that validate waste. Since performance measures are crucial to improve waste management as its  goals of  to promote the performance of organizations .In this research four primary KPIs have been employed that are significant to lean-green management; operational, environmental, economic and social performance factors, subdivided further into sixteen as (Value stream mapping, life cycle assessment,---etc. Also in this research   determination and ranking of these performance measures and their influence on waste minimization is conducted. Interpretive Structural Modeling (ISM methodology is applied to the classification of Key Performance Indicators (KPIs according to the priority of their importance and the correlation between them and their impact to waste minimization. Cronbach’s Alpha coefficient is employed  to assess the reliability of performance measures to minimize waste, and increase customer  satisfaction.  Results showed that Al-Kufa Cement plant has bad overall performance toward lean green waste management perspective. The highest individual score is for operational performance (6.6 rated as medium. But  the lowest individual score is for economic performance [very bad (2.0].   

  19. Similar effects of lysine deficiency in muscle biochemical characteristics of fatty and lean piglets.

    Science.gov (United States)

    Palma-Granados, P; Haro, A; Seiquer, I; Lara, L; Aguilera, J F; Nieto, R

    2017-07-01

    compared with Iberian pigs ( < 0.01). Urea and total cholesterol increased in pigs consuming Lys-deficient diets ( < 0.01). The plasma free carnitine concentration was higher in Iberian pigs than in LDW pigs ( < 0.059). No changes in plasma carnitine status due to dietary Lys supply were detected. Feeding Lys-deficient diets could be a suitable strategy for increasing intramuscular fat content in fatty and lean pigs.

  20. IBS Diet

    Science.gov (United States)

    ... the most common questions IBS patients have is what food to avoid. This can drive a person to ... Global Treatments IBS Diet What to Do and What to Avoid Foods That Cause Cramping and Diarrhea Foods that Cause ...

  1. Heart disease and diet

    Science.gov (United States)

    Diet - heart disease; CAD - diet; Coronary artery disease - diet; Coronary heart disease - diet ... diet and lifestyle can reduce your risk of: Heart disease, heart attacks, and stroke Conditions that lead ...

  2. Diet composition determines course of hyperphagia in developing Zucker obese rats.

    Science.gov (United States)

    Vasselli, J R; Maggio, C A

    1990-12-01

    Previous observations from this laboratory indicate that, during growth, the hyperphagia of the male genetically obese Zucker rat reaches a peak or "breakpoint" and then declines. To examine the effect of dietary macronutrient content on the course of hyperphagia, groups of male lean and obese rats were maintained from 5-28 weeks of age on powdered chow, or isocaloric diets (3.6 kcal/g) containing 72% of calories as corn oil, dextrose, or soy isolate protein (n = 5 lean and obese rats/diet). On chow, hyperphagia was maintained at a level of 7-8 g above lean control intake until a "breakpoint" was reached at 17 weeks, and obese intake declined to lean control level. On the fat diet, hyperphagia was increased to 10 g/day when a breakpoint was reached at 8 weeks. On the dextrose and protein diets, hyperphagia at a level of 3-4 g/day reached breakpoints at weeks 18 and 16, respectively. On all diets, the intakes of obese rats were precisely equal to the intakes of lean control rats by weeks 19-20. These data show that the magnitude and duration of hyperphagia in the developing obese rat are influenced by diet composition. Previously, we have proposed that the obese rat's hyperphagia arises from rapid adipocyte filling. Since high-fat diets facilitate adipocyte enlargement, the early "breakpoint" of hyperphagia seen with the high-fat diet may indicate that this feeding stimulation decreases as the fat cells of the obese rat approach maximal size.

  3. Industry 4.0 implies lean manufacturing: Research activities in industry 4.0 function as enablers for lean manufacturing

    Directory of Open Access Journals (Sweden)

    Adam Sanders

    2016-09-01

    Full Text Available Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industry 4.0 and lean manufacturing, and investigates whether Industry 4.0 is capable of implementing lean. Executing Industry 4.0 is a cost-intensive operation, and is met with reluctance from several manufacturers. This research also provides an important insight into manufacturers’ dilemma as to whether they can commit into Industry 4.0, considering the investment required and unperceived benefits. Design/methodology/approach: Lean manufacturing is first defined and different dimensions of lean are presented. Then Industry 4.0 is defined followed by representing its current status in Germany. The barriers for implementation of lean are analysed from the perspective of integration of resources. Literatures associated with Industry 4.0 are studied and suitable solution principles are identified to solve the abovementioned barriers of implementing lean. Findings: It is identified that researches and publications in the field of Industry 4.0 held answers to overcome the barriers of implementation of lean manufacturing. These potential solution principles prove the hypothesis that Industry 4.0 is indeed capable of implementing lean. It uncovers the fact that committing into Industry 4.0 makes a factory lean besides being smart. Originality/value: Individual researches have been done in various technologies allied with Industry 4.0, but the potential to execute lean manufacturing was not completely perceived. This paper bridges the gap between these two realms, and identifies

  4. Lean-Prinzipien für verbesserte Kosteneffizienz: Instandhaltungseffizienz durch Lean Maintenance

    OpenAIRE

    Bandow, G.; Schmidt, A.

    2008-01-01

    Die Bedeutung der Instandhaltung nimmt weiter zu. In einem Lean Umfeld mit einer immer verschwendungsärmeren Produktion stehen nicht nur die Kosteneffizienz und Verfügbarkeit der Produktionsmittel im Fokus. Unplanmäßige Stillstände kosten Geld und gefährden häufig auch Personal und Produkt. Lean Maintenance vermeidet Verschwendung und optimiert so die Effektivität und Effizienz der Instandhaltung. Das zielgerichtete Zusammenspiel von Menschen, Prozessen und Technik garantiert dabei den Erfolg...

  5. Lean Thinking and Transferring Lean Management - The Best Defence against an Economic Recession?

    Directory of Open Access Journals (Sweden)

    Daniel D. GEORGESCU

    2011-06-01

    Full Text Available Productivity growth is a fundamental means for society to improve its living standards. Productivity growth comes from technological change (new ways of producing goods and services and better organisation of production (better ways of using available resources given available technology. Both processes operate simultaneously and, in practice, it is difficult to distinguish between the effects of each process. The processes are dynamic and affect individual activities differently over time. These years, manufacturing functions have been transferred rapidly and globally from mature countries to emerging countries. This paper is about the lean philosophy and the critical elements for successful transfer of lean management among sites and countries.

  6. Quality improvement in basic histotechnology: the lean approach.

    Science.gov (United States)

    Clark, David

    2016-01-01

    Lean is a comprehensive system of management based on the Toyota production system (TPS), encompassing all the activities of an organization. It focuses management activity on creating value for the end-user by continuously improving operational effectiveness and removing waste. Lean management creates a culture of continuous quality improvement with a strong emphasis on developing the problem-solving capability of staff using the scientific method (Deming's Plan, Do, Check, Act cycle). Lean management systems have been adopted by a number of histopathology departments throughout the world to simultaneously improve quality (reducing errors and shortening turnround times) and lower costs (by increasing efficiency). This article describes the key concepts that make up a lean management system, and how these concepts have been adapted from manufacturing industry and applied to histopathology using a case study of lean implementation and evidence from the literature. It discusses the benefits, limitations, and pitfalls encountered when implementing lean management systems.

  7. Performance effect of multiple control forms in a Lean organization

    DEFF Research Database (Denmark)

    Kristensen, Thomas Borup; Israelsen, Poul

    2012-01-01

    Over the last decades Lean has developed into a prominent management philosophy reaching beyond shop floor tools. However, substantial support of performance effects from Lean is still scarce and at best with mixed results. Recently, research has turned its focus towards perceiving Lean...... as a control package. In this paper we present statistical support for enhanced performance coming from Lean. Furthermore, our results strongly support the perception of Lean as a set of multiple control forms (output, behavioral, and social controls) that complement each other. Therefore, performance...... is increased if the average level of control forms is increased, and performance is further increased if the control forms are balanced at the same level representing a complementary effect between them. Our data are archival data spanning multiple years in a strong Lean organization. The dependent performance...

  8. Lean Management Systems in Radiology: Elements for Success.

    Science.gov (United States)

    Schultz, Stacy R; Ruter, Royce L; Tibor, Laura C

    2016-01-01

    This article is a review of the literature on Lean and Lean Management Systems and how they have been implemented in healthcare organizations and particularly in radiology departments. The review focuses on the elements required for a successful implementation of Lean by applying the principles of a Lean Management System instead of a Lean tools-only approach. This review shares the successes and failures from healthcare organizations' efforts to improve the quality and safety of the services they provide. There are a limited number of healthcare organizations in the literature who have shared their experiences and additional research is necessary to determine whether a Lean Management System is a viable alternative to the current management structure in healthcare.

  9. Elevated anti-Mullerian hormone in lean women may not indicate polycystic ovarian syndrome.

    Science.gov (United States)

    Bradbury, Rachel A; Lee, Paul; Smith, Howard C

    2017-10-01

    Polycystic ovarian syndrome (PCOS) is a heterogeneous disorder with clinical features shared with functional hypogonadotrophic hypogonadism (FHH). To investigate the usefulness of an elevated (>40 pmol/L) anti-Mullerian hormone (AMH) in identifying PCOS and distinguishing PCOS from FHH. 141 patients with an elevated AMH and body mass index either 30 kg/m 2 (obese) were selected and three subgroups analysed - obese, lean, lean with suspected FHH. FHH was diagnosed clinically, incorporating diet, weight and exercise history; confirmatory tests included pituitary MRIs, progestin challenges and endometrial thickness measurements. PCOS features of oligo/anovulation, polycystic ovarian morphology (PCOm) and hyperandrogenism were determined by clinical history, pelvic ultrasound, free androgen index and physical examination, respectively. Features of PCOS and blood levels of AMH, follicle-stimulating hormone, luteinising hormone, sex hormone binding globulin (SHBG) and testosterone were compared between subgroups. Of 141 patients with elevated AMH, 76 were obese and 65 lean. Greater than one-third of lean women had the clinical picture of FHH. Elevated AMH predicted PCOm and menstrual irregularity across all subgroups but uniquely associated with hyperandrogenism in the obese. Median AMH levels were similar among FHH and non-FHH women. Median SHBG levels were significantly higher (111 ± 73 vs 56 ± 31, P polycystic ovarian morphology. AMH did not assist in differentiating FHH from PCOS. A higher SHBG level shows promise as a discriminatory finding in FHH. © 2017 The Royal Australian and New Zealand College of Obstetricians and Gynaecologists.

  10. Increased protein intake reduces lean body mass loss during weight loss in athletes.

    Science.gov (United States)

    Mettler, Samuel; Mitchell, Nigel; Tipton, Kevin D

    2010-02-01

    To examine the influence of dietary protein on lean body mass loss and performance during short-term hypoenergetic weight loss in athletes. In a parallel design, 20 young healthy resistance-trained athletes were examined for energy expenditure for 1 wk and fed a mixed diet (15% protein, 100% energy) in the second week followed by a hypoenergetic diet (60% of the habitual energy intake), containing either 15% (approximately 1.0 g x kg(-1)) protein (control group, n = 10; CP) or 35% (approximately 2.3 g x kg(-1)) protein (high-protein group, n = 10; HP) for 2 wk. Subjects continued their habitual training throughout the study. Total, lean body, and fat mass, performance (squat jump, maximal isometric leg extension, one-repetition maximum (1RM) bench press, muscle endurance bench press, and 30-s Wingate test) and fasting blood samples (glucose, nonesterified fatty acids (NEFA), glycerol, urea, cortisol, free testosterone, free Insulin-like growth factor-1 (IGF-1), and growth hormone), and psychologic measures were examined at the end of each of the 4 wk. Total (-3.0 +/- 0.4 and -1.5 +/- 0.3 kg for the CP and HP, respectively, P = 0.036) and lean body mass loss (-1.6 +/- 0.3 and -0.3 +/- 0.3 kg, P = 0.006) were significantly larger in the CP compared with those in the HP. Fat loss, performance, and most blood parameters were not influenced by the diet. Urea was higher in HP, and NEFA and urea showed a group x time interaction. Fatigue ratings and "worse than normal" scores on the Daily Analysis of Life Demands for Athletes were higher in HP. These results indicate that approximately 2.3 g x kg(-1) or approximately 35% protein was significantly superior to approximately 1.0 g x kg(-1) or approximately 15% energy protein for maintenance of lean body mass in young healthy athletes during short-term hypoenergetic weight loss.

  11. Analysis The Leanness of The Supply Chain By Fuzzy QFD

    OpenAIRE

    Mukesh Singh Baghel; Pavan Agrawal

    2014-01-01

    The new systems of doing business in manufacturing have evolved in recent decades Lean production. Lean production can be traced to the 1960s in Japan, when Toyota Motors started innovating changes in mass production to deal with its domestic automotive market. The term “Lean production” was coined around 1989 with the popularity of the book, the machine that can change the world written by researchers at the Massachusetts Institute of Technology (MIT). The term itself was coined ...

  12. Application of lean manufacturing techniques in the Emergency Department.

    Science.gov (United States)

    Dickson, Eric W; Singh, Sabi; Cheung, Dickson S; Wyatt, Christopher C; Nugent, Andrew S

    2009-08-01

    "Lean" is a set of principles and techniques that drive organizations to continually add value to the product they deliver by enhancing process steps that are necessary, relevant, and valuable while eliminating those that fail to add value. Lean has been used in manufacturing for decades and has been associated with enhanced product quality and overall corporate success. To evaluate whether the adoption of Lean principles by an Emergency Department (ED) improves the value of emergency care delivered. Beginning in December 2005, we implemented a variety of Lean techniques in an effort to enhance patient and staff satisfaction. The implementation followed a six-step process of Lean education, ED observation, patient flow analysis, process redesign, new process testing, and full implementation. Process redesign focused on generating improvement ideas from frontline workers across all departmental units. Value-based and operational outcome measures, including patient satisfaction, expense per patient, ED length of stay (LOS), and patient volume were compared for calendar year 2005 (pre-Lean) and periodically after 2006 (post-Lean). Patient visits increased by 9.23% in 2006. Despite this increase, LOS decreased slightly and patient satisfaction increased significantly without raising the inflation adjusted cost per patient. Lean improved the value of the care we delivered to our patients. Generating and instituting ideas from our frontline providers have been the key to the success of our Lean program. Although Lean represents a fundamental change in the way we think of delivering care, the specific process changes we employed tended to be simple, small procedure modifications specific to our unique people, process, and place. We, therefore, believe that institutions or departments aspiring to adopt Lean should focus on the core principles of Lean rather than on emulating specific process changes made at other institutions.

  13. A new lean change methodology for small & medium sized enterprises

    OpenAIRE

    April, Joris; Powell, Daryl; Bart, Schanssema

    2010-01-01

    SMEs find it difficult to implement productivity improvement tools, particularly those associated with Lean Manufacturing. Larger companies have more success due to greater access to resources. To provide the SMEs with a way to implement Lean sustainably, the European project ERIP develops a new lean change methodology for SMEs. In this paper the methodology is explained and three test cases show the strength of the methodology. The method is a sequence of achieving management and company sup...

  14. Lean and Efficient Software: Whole-Program Optimization of Executables

    Science.gov (United States)

    2015-09-30

    Lean and Efficient Software: Whole-Program Optimization of Executables” Project Summary Report #5 (Report Period: 7/1/2015 to 9/30/2015...TYPE 3. DATES COVERED 00-00-2015 to 00-00-2015 4. TITLE AND SUBTITLE Lean and Efficient Software: Whole-Program Optimization of Executables 5a...unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Lean and Efficient Software: Whole-Program

  15. A Model to align the organizational culture to Lean

    Directory of Open Access Journals (Sweden)

    Mehrsa Taherimashhadi

    2018-04-01

    Full Text Available Purpose: Since the emergence of Lean Manufacturing many organizations strived to implement it. Nonetheless, sustainable Lean transformation is not as easy as to be simply achieved. Several aspects need to be taken into account before Lean implementation which national and organizational culture are important. By considering influences of national culture on the organizational culture, this paper aims at proposing an evaluation model to determine the cultural weaknesses of an organization and give some recommendations to manage people before implementing Lean. Design/methodology/approach: This research has been conducted based on literature review survey and semi-structured interviews. Research papers, conference proceedings, books, and official websites regarding Lean philosophy were reviewed to find the influence of national culture in Lean implementation. Different databases were scrutinized, from 2015 to 2017, containing Scopus and Web of Science with the time period of 1996-2016. A set of key terms and their combinations were used including: Toyota Production system, Lean production, Lean manufacturing, Lean management, Transformation, Implementation, Barriers/ Impediments/Challenges/Difficulties, Human resources, Success factors, Organizational culture, and National culture. Findings: The proposed evaluation model is a guide for organizations to determine cultural misalignments between the corporate culture and the Lean culture before its implementation and gives some managerial recommendations to correct them. Originality/value: This study is the first attempt to integrate the national models   with Lean culture to provide an evaluation model and some recommendations to help the organization to align its culture to Lean culture before its implementation.

  16. Implementing lean office: a successful case in public sector

    OpenAIRE

    Monteiro, Mónica F. J. R.; Pacheco, Claudia C. L.; Dinis-Carvalho, José; Paiva, Francisco C.

    2015-01-01

    Applying lean approaches in office areas can lead to performance improvements and other benefits as achieved in traditional manufacturing environments. The intangibility of office operations may appear as a major difficulty for lean implementations but in fact the benefits achievable are as important as the ones achieved in manufacturing environments. This paper reports a successful case of lean office implementation in a public sector organization giving emphasis to its major performance imp...

  17. Identification of Lean Implementation Hurdles in Indian Industries

    OpenAIRE

    Bhim Singh

    2016-01-01

    Due to increased pressure from global competitors, manufacturing organizations are switching over to lean philosophies from traditional mass production. Lean manufacturing is a manufacturing philosophy which focuses on elimination of various types of wastes and creates maximum value for the end customers. Lean thinking aims to produce high quality products and services at the lowest possible cost with maximum customer responsiveness. Indian Industry is facing lot of problems in this transform...

  18. Getting 'Lean': hardwiring process excellence into Northeast Health.

    Science.gov (United States)

    Brown, Tricia; Duthe, Robert

    2009-01-01

    Many healthcare organizations are turning to the "Lean" Toyota Production System as a means to hardwire process excellence into their organizations. Northeast Health, an integrated delivery system in New York's capital region, introduced the Lean concept into its culture in 2004. After four years, the organization is beginning to see its staff hardwire Lean thinking into day-to-day behaviors. This paper focuses on the approach used by Northeast Health to introduce Lean concepts into its culture, challenges faced, lessons learned and the factors critical to success.

  19. Application of a mathematical model for ergonomics in lean manufacturing.

    Science.gov (United States)

    Botti, Lucia; Mora, Cristina; Regattieri, Alberto

    2017-10-01

    The data presented in this article are related to the research article "Integrating ergonomics and lean manufacturing principles in a hybrid assembly line" (Botti et al., 2017) [1]. The results refer to the application of the mathematical model for the design of lean processes in hybrid assembly lines, meeting both the lean principles and the ergonomic requirements for safe assembly work. Data show that the success of a lean strategy is possible when ergonomics of workers is a parameter of the assembly process design.

  20. Lean leadership attributes: a systematic review of the literature.

    Science.gov (United States)

    Aij, Kjeld Harald; Teunissen, Maurits

    2017-10-09

    Purpose Emphasis on quality and reducing costs has led many health-care organizations to reconfigure their management, process, and quality control infrastructures. Many are lean, a management philosophy with roots in manufacturing industries that emphasizes elimination of waste. Successful lean implementation requires systemic change and strong leadership. Despite the importance of leadership to successful lean implementation, few researchers have probed the question of ideal leadership attributes to achieve lean thinking in health care. The purpose of this paper is to provide insight into applicable attributes for lean leaders in health care. Design/methodology/approach The authors systematically reviewed the literature on principles of leadership and, using Dombrowski and Mielke's (2013) conceptual model of lean leadership, developed a parallel theoretical model for lean leadership in health care. Findings This work contributes to the development of a new framework for describing leadership attributes within lean management of health care. Originality/value The summary of attributes can provide a model for health-care leaders to apply lean in their organizations.

  1. Using lean methodologies for economically and environmentally sustainable foundries

    Directory of Open Access Journals (Sweden)

    R. M. Torielli

    2011-02-01

    Full Text Available Lean manufacturing is often seen as a set of tools that reduce the total cost and improve the quality of manufactured products. The lean management philosophy is one which targets waste reduction in every facet of the manufacturing business; however, only recently have studies linked lean management philosophies with improving environmental sustainability. These studies suggest that lean manufacturing is more than a set of lean tools that can optimize manufacturing efficiencies; it is a process and mindset that needs to be integrated into daily manufacturing systems to achieve sustainability. The foundry industry, as well as manufacturing in general, has significant challenges in the current regulatory and political climate with developing an economically and environmentally sustainable business model. Lean manufacturing has proven itself as a model for both economic sustainability and environmental stewardship. Several recent studies have shown that both lean and green techniques and “zero-waste” policies also lead to reductions in overall cost. While these strategies have been examined for general manufacturing, they have not been investigated in detail for the foundry industry. This paper will review the current literature and describe how lean and green can provide a relevant framework for environmentally and economically sustainable foundries. Examples of lean and green technologies and techniques which can be applied to foundries in a global context will be described.

  2. LEAN ACCOUNTING: SUATU ALTERNATIF TEKNIK AKUNTANSI MANAJEMEN DALAM INDUSTRI MANUFAKTUR

    Directory of Open Access Journals (Sweden)

    Eka Ardhani Sisdyani

    2010-07-01

    Full Text Available Manufacturing techniques have been developed to embrace theaims of continuous improvement. Continuous improvement would leadcompanies to win business competition. One technique that gains moreand more followers is lean manufacturing. Lean manufacturing hastwo main purposes, which are eliminating wastes and creating valuesto customers. It focuses on customer values, value stream, productionflows, demand-pull, and perfection. Lean accounting is needed tosupport and encourage the development of lean manufacturing, forinstances in product costing system, external reporting, and otherdecision making processes that need accounting data.

  3. Why Lean doesn't work for everyone.

    Science.gov (United States)

    Kaplan, Gary S; Patterson, Sarah H; Ching, Joan M; Blackmore, C Craig

    2014-12-01

    Popularisation of Lean in healthcare has led to emphasis on Lean quality improvement tools in isolation, with inconsistent results. We argue that delivery of safer, more efficient, and higher quality-patient focused care requires organisational transformation of which the Lean toolkit is only one component. To successfully facilitate system transformation toward higher quality care at lower cost, Lean tools must be part of a comprehensive management system, within a supportive institutional culture, and with committed leadership. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  4. Prevalence and hemodynamic effects of leaning during CPR

    Science.gov (United States)

    Niles, Dana E.; Sutton, Robert M.; Nadkarni, Vinay M.; Glatz, Andrew; Zuercher, Mathias; Maltese, Matthew R.; Eilevstjønn, Joar; Abella, Benjamin S.; Becker, Lance B.; Berg, Robert A.

    2013-01-01

    Background Cardiopulmonary resuscitation (CPR) guidelines recommend complete release between chest compressions (CC). Objective Evaluate the hemodynamic effects of leaning (incomplete chest wall release) during CPR and the prevalence of leaning during CPR. Results In piglet ventricular fibrillation cardiac arrests, 10% and 20% (1.8 kg and 3.6 kg, respectively), leaning during CPR increased right atrial pressures, decreased coronary perfusion pressures, and decreased cardiac index and left ventricular myocardial blood flow by nearly 50%. In contrast, residual leaning of a 260 g accelerometer/ force feedback device did not adversely affect cardiac index or myocardial blood flow. Among 108 adult in-hospital CPR events, leaning ≥2.5 kg was demonstrable in 91% of the events and 12% of the evaluated CC. For 12 children with in-hospital CPR, 28% of CC had residual leaning ≥2.5 kg and 89% had residual leaning ≥0.5 kg. Conclusions Leaning during CPR increases intrathoracic pressure, decreases coronary perfusion pressure, and decreases cardiac output and myocardial blood flow. Leaning is common during CPR. PMID:22208173

  5. What Determines Lean Manufacturing Implementation? A CB-SEM Model

    Directory of Open Access Journals (Sweden)

    Tan Ching Ng

    2018-02-01

    Full Text Available This research aims to ascertain the determinants of effective Lean Manufacturing (LM. In this research, Covariance-based Structural Equation Modeling (CB-SEM analysis will be used in order to analyze the determinants. Through CB-SEM analysis, the significant key determinants can be determined and the direct relationships among determinants can be analyzed. Thus, the findings of this research can act as guidelines for achievement of LM effectiveness, not only providing necessary steps for successful implementation of lean, but also helping lean companies to achieve higher level of lean cost and time savings.

  6. Experienced Barriers to Lean in Swedish Manufacturing and Health Care

    Directory of Open Access Journals (Sweden)

    Bengt Halling

    2013-12-01

    Full Text Available The purpose is to compare similarities and divergences in how the concepts of Lean and barriers to Lean are described by key informants at a production unit in a large manufacturing company and two emergency health care units in Sweden. Data was collected via semi-structured interviews and analyzed with the constant comparative method (CCM and Porras and Robertson’s (1992 change model. : In both organizations, the view of Lean changed from a toolbox to a human behavior view. Eight barriers were experienced in both organizations. Three barriers were unique to manufacturing or to health care, respectively. Nine barriers were elements of social factors; five were elements of organizing arrangements. Only people practically involved and responsible for the implementation at the two organizations participated in the study. Persons responsible for implementing Lean should consider organizational arrangements and social factors in order to limit barriers to successful implementation. Most research on Lean has been about successful Lean implementations. This study focuses on how Lean is viewed and what barriers personnel in manufacturing and health care have experienced. In comparing the barriers to Lean experienced in the two groups, common, archetypical, and unique barriers for manufacturing and health care can be identified, thus contributing to knowledge about barriers to Lean implementation.

  7. Product innovation and commercialization in lean global start-ups

    DEFF Research Database (Denmark)

    Tanev, Stoyan; Rasmussen, Erik Stavnsager; Zijdemans, Erik

    2015-01-01

    The paper examines the distinctive characteristics of product innovation and commercialization in Lean Global Start-up (LGS) – new technology firms which have adopted a lean and global path from or near to their inception. It suggests an uncertainty vs risk framework which allows integrating two...... research streams – Born Global (BG) firms and lean start-ups. In addition to its integrative theoretical value, the paper offers insights for lean start-up managers dealing with the challenges of a global start....

  8. Lean principles adoption in environmental management system (EMS - ISO 14001

    Directory of Open Access Journals (Sweden)

    Perumal Puvanasvaran

    2012-12-01

    Full Text Available Purpose: The purpose of this study is to examine the characteristic of the lean principles into ISO 14001 and to propose linkage of the lean principles and ISO 14001.Design/methodology/approach: To achieve the objective of the study, literature survey and quantitative research method using questionnaires survey are used.Findings and Originality/value: The findings of this study confirm that ISO 14001 certified company adopted lean production practices.  The study also proves that lean principles have positive and significant relationship with ISO 14001 EMS and the linkage can be made between lean principles and ISO 14001 to achieve Continual Improvement.Research limitations/implications: The small sizes of the sample of the participating companies are the main limitations of this study and this research mainly focuses on the manufacturing environment and services industry.Practical implications: This research show that all ISO 14001 companies do adopt at least one lean production practices and the main findings are lean principles has positive and highly significant relationship with ISO 14001 requirements.  This is because the integration of lean principles into ISO 14001 will serve practical methods for ISO14001 EMS to achieve the continual improvement.Originality/value: This research is amongst the first to study the combined lean principles with ISO 1400.  Based on the current situation, there is no integration within this two management system. 

  9. Lean management - an effective way to arrange maintenance?; Lean Management - ein effektiver Weg zur Gestaltung der Instandhaltung?

    Energy Technology Data Exchange (ETDEWEB)

    Tschuschke, W. [Inst. fuer Instandhaltung gGmbH, Iserlohn (Germany)

    1996-08-01

    Lean management/lean production wishes to attain more through intelligent operation system/production at less expense (personnel, materials, energy, costs). The object is not harder but more intelligent and production work; we do not need to run faster but to find shorter routes. The idea of lean management`s effects and changes have consequences for the field of maintenance as an equivalent and legitimate business area which are discussed in this paper. (orig.) [Deutsch] Lean Management/Lean Production will durch ein intelligentes Arbeitssystem/Produzieren mit weniger Aufwand (Personal, Material, Energie, Kosten) mehr erreichen. Ziel ist nicht das haertere, sondern das intelligentere und produktivere Arbeiten; wir sollen nicht schneller laufen, sondern kuerzere Wege finden. Fuer den Bereich Instandhaltung als gleichwertiger und gleichberechtigter Unternehmensbereich haben die Gedanken des Lean Managements Auswirkungen und Veraenderungen zur Folge, die im Beitrag genannt werden. (orig.)

  10. Leaning on lean: the reception of a management fashion in Germany

    NARCIS (Netherlands)

    Benders, J.G.J.M.; Bijsterveld, M.J.L. van

    2000-01-01

    The ‘fashionable’ concept of lean production has been discussed more intensively in Germany than elsewhere in Europe but has resulted not only in rationalisation measures such as downsizing and delayering but also in implementing ‘Gruppenarbeit’. Through interpretation processes at different levels,

  11. "The largest Lean transformation in the world": the implementation and evaluation of lean in Saskatchewan healthcare.

    Science.gov (United States)

    Kinsman, Leigh; Rotter, Thomas; Stevenson, Katherine; Bath, Brenna; Goodridge, Donna; Harrison, Liz; Dobson, Roy; Sari, Nazmi; Jeffery, Cathy; Bourassa, Carrie; Westhorp, Gill

    2014-01-01

    The Saskatchewan Ministry of Health has committed to a multi-million dollar investment toward the implementation of Lean methodology across the province's healthcare system. Originating as a production line discipline (the Toyota Production System), Lean has evolved to encompass process improvements including inventory management, waste reduction and quality improvement techniques. With an initial focus on leadership, strategic alignment, training and the creation of a supportive infrastructure (Lean promotion offices), the goal in Saskatchewan is a whole health system transformation that produces "better health, better value, better care, and better teams." Given the scope and scale of the initiative and the commitment of resources, it is vital that a comprehensive, longitudinal evaluation plan be implemented to support ongoing decision-making and program design. The nature of the initiative also offers a unique opportunity to contribute to health quality improvement science by advancing our understanding of the implementation and evaluation of complex, large-scale healthcare interventions. The purpose of this article is to summarize the background to Lean in Saskatchewan and the proposed evaluation methods. Copyright © 2014 Longwoods Publishing.

  12. Lean Architecture for Agile Software Development

    CERN Document Server

    Coplien, James O

    2010-01-01

    More and more Agile projects are seeking architectural roots as they struggle with complexity and scale - and they're seeking lightweight ways to do it: Still seeking? In this book the authors help you to find your own path; Taking cues from Lean development, they can help steer your project toward practices with longstanding track records; Up-front architecture? Sure. You can deliver an architecture as code that compiles and that concretely guides development without bogging it down in a mass of documents and guesses about the implementation; Documentation? Even a whiteboard diagram, or a CRC

  13. How dieting makes some fatter: from a perspective of human body composition autoregulation.

    Science.gov (United States)

    Dulloo, Abdul G; Jacquet, Jean; Montani, Jean-Pierre

    2012-08-01

    Dieting makes you fat - the title of a book published in 1983 - embodies the notion that dieting to control body weight predisposes the individual to acquire even more body fat. While this notion is controversial, its debate underscores the large gap that exists in our understanding of basic physiological laws that govern the regulation of human body composition. A striking example is the key role attributed to adipokines as feedback signals between adipose tissue depletion and compensatory increases in food intake. Yet, the relative importance of fat depletion per se as a determinant of post-dieting hyperphagia is unknown. On the other hand, the question of whether the depletion of lean tissues can provide feedback signals on the hunger-appetite drive is rarely invoked, despite evidence that food intake during growth is dominated by the impetus for lean tissue deposition, amidst proposals for the existence of protein-static mechanisms for the regulation of growth and maintenance of lean body mass. In fact, a feedback loop between fat depletion and food intake cannot explain why human subjects recovering from starvation continue to overeat well after body fat has been restored to pre-starvation values, thereby contributing to 'fat overshooting'. In addressing the plausibility and mechanistic basis by which dieting may predispose to increased fatness, this paper integrates the results derived from re-analysis of classic longitudinal studies of human starvation and refeeding. These suggest that feedback signals from both fat and lean tissues contribute to recovering body weight through effects on energy intake and thermogenesis, and that a faster rate of fat recovery relative to lean tissue recovery is a central outcome of body composition autoregulation that drives fat overshooting. A main implication of these findings is that the risk of becoming fatter in response to dieting is greater in lean than in obese individuals.

  14. Changes in UCP expression in tissues of Zucker rats fed diets with different protein content.

    Science.gov (United States)

    Masanés, R M; Yubero, P; Rafecas, I; Remesar, X

    2002-09-01

    The effect of dietary protein content on the uncoupling proteins (UCP) 1, 2 and 3 expression in a number of tissues of Zucker lean and obese rats was studied. Thirty-day-old male Zucker lean (Fa/?) and obese (fa/fa) rats were fed on hyperproteic (HP, 30% protein), standard (RD, 17% protein) or hypoproteic (LP, 9% protein) diets ad libitum for 30 days. Although dietary protein intake affected the weights of individual muscles in lean and obese animals, these weights were similar. In contrast, huge differences were observed in brown adipose tissue (BAT) and liver weights. Lean rats fed on the LP diet generally increased UCP expression, whereas the HP group had lower values. Obese animals, HP and LP groups showed higher UCP expression in muscles, with slight differences in BAT and lower values for UCP3 in subcutaneous adipose tissue. The mean values of UCP expression in BAT of obese rats were lower than in their lean counterpart, whereas the expression in skeletal muscle was increased. Thus, expression of UCPs can be modified by dietary protein content, in lean and obese rats. A possible thermogenic function of UCP3 in muscle and WAT in obese rats must be taken into account.

  15. Intermittent hypoxia exacerbates metabolic effects of diet-induced obesity.

    Science.gov (United States)

    Drager, Luciano F; Li, Jianguo; Reinke, Christian; Bevans-Fonti, Shannon; Jun, Jonathan C; Polotsky, Vsevolod Y

    2011-11-01

    Obesity causes insulin resistance (IR) and nonalcoholic fatty liver disease (NAFLD), but the relative contribution of sleep apnea is debatable. The main aim of this study is to evaluate the effects of chronic intermittent hypoxia (CIH), a hallmark of sleep apnea, on IR and NAFLD in lean mice and mice with diet-induced obesity (DIO). Mice (C57BL/6J), 6-8 weeks of age were fed a high fat (n = 18) or regular (n = 16) diet for 12 weeks and then exposed to CIH or control conditions (room air) for 4 weeks. At the end of the exposure, fasting (5 h) blood glucose, insulin, homeostasis model assessment (HOMA) index, liver enzymes, and intraperitoneal glucose tolerance test (1 g/kg) were measured. In DIO mice, body weight remained stable during CIH and did not differ from control conditions. Lean mice under CIH were significantly lighter than control mice by day 28 (P = 0.002). Compared to lean mice, DIO mice had higher fasting levels of blood glucose, plasma insulin, the HOMA index, and had glucose intolerance and hepatic steatosis at baseline. In lean mice, CIH slightly increased HOMA index (from 1.79 ± 0.13 in control to 2.41 ± 0.26 in CIH; P = 0.05), whereas glucose tolerance was not affected. In contrast, in DIO mice, CIH doubled HOMA index (from 10.1 ± 2.1 in control to 22.5 ± 3.6 in CIH; P obesity.

  16. Peak bone mineral density, lean body mass and fractures

    NARCIS (Netherlands)

    Boot, Annemieke M.; de Ridder, Maria A. J.; van der Sluis, Inge M.; van Slobbe, Ingrid; Krenning, Eric P.; Keizer-Schrama, Sabine M. P. F. de Muinck

    Background: During childhood and adolescence, bone mass and lean body mass (LBM) increase till a plateau is reached. In this longitudinal and cross-sectional study, the age of reaching the plateau was evaluated for lumbar spine and total body bone mass measurements and lean body mass. The

  17. Chemical structures and theoretical models of lean premixed ...

    African Journals Online (AJOL)

    To better understand the chemistry involved in the lean-fuel combustion, the chemical structure of lean premixed propene-oxygen-nitrogen flames stabilized on a flat-flame burner at atmospheric pressure was determined experimentally. The species mole fraction profiles were also computed by the Premix code and three ...

  18. Lean Supply Chain Planning: A Performance Evaluation through Simulation

    Directory of Open Access Journals (Sweden)

    Rossini Matteo

    2016-01-01

    Full Text Available Nowadays companies look more and more for improving their efficiency to excel in the market. At the same time, the competition has moved from firm level to whole supply chain level. Supply chain are very complex systems and lacks of coordination among their members leads to inefficiency. Supply chain planning task is to improve coordination among supply chain members. Which is the best planning solution to improve efficiency is an open issue. On the other hand, Lean approach is becoming more and more popular among managers. Lean approach is recognize as efficiency engine for production systems, but effects of Lean implementation out of single firm boundaries is not clear. This paper aims at providing a theoretical and practical starting point for Lean implementation in supply chain planning issue. To reach it, a DES simulation model of a three-echelon and multi-product supply chain has been set. Lean management is a very broad topic and this paper focuses on two principles of “pull” and “create the flow”. Kanban system and setup-time and batch-size reductions are implemented in the lean-configured supply chain to apply “pull” and “create the flow” respectively. Lean principles implementations have been analyzed and compared with other supply chain planning policies: EOQ and information sharing (Visibility. Supported by the simulation study, this paper points Lean supply chain planning is a competitive planning policies to increase efficiency.

  19. Benchmarking performance measurement and lean manufacturing in the rough mill

    Science.gov (United States)

    Dan Cumbo; D. Earl Kline; Matthew S. Bumgardner

    2006-01-01

    Lean manufacturing represents a set of tools and a stepwise strategy for achieving smooth, predictable product flow, maximum product flexibility, and minimum system waste. While lean manufacturing principles have been successfully applied to some components of the secondary wood products value stream (e.g., moulding, turning, assembly, and finishing), the rough mill is...

  20. Inspanning om Lean Six Sigma op kaart te zetten beloond

    NARCIS (Netherlands)

    Does, R.J.M.M.

    2008-01-01

    Prof.dr. R.J.M.M. Does is al jarenlang een fervent voorvechter voor het gebruik van statistiek. En meer recent is hij zo’n beetje de belichaming van (Lean) Six Sigma in Europa. Tal van grote organisaties hebben hem te hulp geroepen bij de invoering van (Lean) Six Sigma. Het is dan ook niet meer dan

  1. Lean Six Sigma in het ziekenhuis: De beschikbaarheid van infuuspompen

    NARCIS (Netherlands)

    Does, R.J.M.M.; Kemper, B.P.H.; Koopmans, M.

    2011-01-01

    In het topklinisch ziekenhuis Medisch Spectrum Twente werd in 2008 een Lean Six Sigma-project gestart. Het doel was vermindering van operationele kosten van infuuspompen. Het is een interessant voorbeeld van Lean Six Sigma in de gezondheidszorg, omdat het laat zien dat kostenbesparing niet hoeft te

  2. Lean and the Learning Organization in Higher Education

    Science.gov (United States)

    Francis, David E.

    2014-01-01

    Canadian post-secondary institutions are seeking enhanced efficiencies due to ongoing funding shortfalls and expanding teaching, research, and service mandates. These institutions have considered or enacted Lean methodology based on results reported by public service and healthcare organizations worldwide. Lean requires a high level of…

  3. The productive operating theatre and lean thinking systems.

    Science.gov (United States)

    Kasivisvanathan, R; Chekairi, A

    2014-11-01

    The concept of 'lean thinking' first originated in the manufacturing industry as a means of improving productivity whilst maintaining quality through eliminating wasteful processes. The purpose of this article is to demonstrate how the principles of 'lean thinking' are relevant to healthcare and the operating theatre, with reference to our own institutional experience.

  4. Lean Thinking in Systems with Non-Negligible Process Variability

    DEFF Research Database (Denmark)

    Nielsen, Erland Hejn; Simons, David

    2000-01-01

    Lean Thinking (Womack and Jones) improves quality, cost and delivery through the relentless elimination of the wastes. For example, the exemplar of Lean, the Toyota Production system, focuses on improvement through the continual elimination of seven categorised wastes (Ohno). Time compression (St...

  5. Lean Thinking in systems with non-negligible process variability

    DEFF Research Database (Denmark)

    Nielsen, Erland Hejn; Simons, David

    2000-01-01

    Lean Thinking (Womack and Jones) improves quality, cost and delivery through the relentless elimination of wastes. For example, the exemplar of Lean, the Toyota Production system, focuses on improvement through the continual elimination of seven categorised wastes (Ohno). Time compression (Stalk ...

  6. Model reduction of a lean NOx trap catalyst model

    NARCIS (Netherlands)

    Nauta, K.M.

    2008-01-01

    The desire to increase fuel efficiency and reduce carbon dioxide emissions of vehicles has led to an increased use of vehicles equipped with lean-burn engines, such as diesel and lean-burn gasoline engines. This type of engine uses excess oxygen when compared to the amount required to

  7. Lang vej endnu før bilindustrien er Lean

    DEFF Research Database (Denmark)

    Christiansen, Thomas Bøhm

    2005-01-01

    Anmeldelse og diskussion af bogen "The Second Century: Reconnecting Customer and Value Chain through Build-to-order - Moving beyond Mass and Lean Production in the Auto Industry......Anmeldelse og diskussion af bogen "The Second Century: Reconnecting Customer and Value Chain through Build-to-order - Moving beyond Mass and Lean Production in the Auto Industry...

  8. Logistics services and Lean Six Sigma implementation: a case study

    NARCIS (Netherlands)

    Gutierrez Gutierrez, L.; de Leeuw, S.L.J.M.; Dubbers, R.

    2016-01-01

    Purpose: This paper aims to analyze the application of Lean Six Sigma (LSS) framework for supporting continuous improvement (CI) in logistics services. Both the lean philosophy and the Six Sigma methodology have become two of the most important initiatives for CI in organizations. The combination of

  9. An application of Lean Six Sigma in a hospital

    NARCIS (Netherlands)

    van den Heuvel, J.; Does, R.J.M.M.; de Koning, H.; Anthony, J.; Kumar, M.

    2007-01-01

    Abstract Healthcare today faces major challenges. Patients demand quality of care to be improved continuously. Insurance companies demand the lowest possible prices. Lean Six Sigma is a tool that can help healthcare providers to achieve these at least partly conflicting goals. Lean Six Sigma is an

  10. Agile and lean principles and systems engineering: a synergy?

    CSIR Research Space (South Africa)

    Joseph-Malherbe, SM

    2011-09-01

    Full Text Available not efficient and effective enough to support rapid fielding of products. The objective of this piece of work is multi-fold: (1) to explore and present fundamental Systems Engineering, Agile and Lean principles (2) the evolution or lack of Lean and Agile...

  11. Yalın düşünce ve Muhasebe (Lean Thinking and Accounting

    Directory of Open Access Journals (Sweden)

    Baki Rıza BALCI

    2011-01-01

    Full Text Available The aim of this article is to introduce the relationship between Lean Thinking and Accounting. It is explained in detail the kinds of reports generated when Lean Thinking implemented in accounting.It is identified that accounting, which could not keep pace with Lean Transformation and remain traditional, shares the failures of companies, who went Lean. This article emphasize that the companies that want to transform themselves into Lean, have to generate proper reports that suit Lean transformation. The types of reports are explained.Literature was scanned and some sample reports are submitted to the Turkish companies that want to go Lean and successful in their Lean efforts.

  12. The gut microbiota and its relationship to diet and obesity

    Science.gov (United States)

    Clarke, Siobhan F.; Murphy, Eileen F.; Nilaweera, Kanishka; Ross, Paul R.; Shanahan, Fergus; O’Toole, Paul W.; Cotter, Paul D.

    2012-01-01

    Obesity develops from a prolonged imbalance of energy intake and energy expenditure. However, the relatively recent discovery that the composition and function of the gut microbiota impacts on obesity has lead to an explosion of interest in what is now a distinct research field. Here, research relating to the links between the gut microbiota, diet and obesity will be reviewed under five major headings: (1) the gut microbiota of lean and obese animals, (2) the composition of the gut microbiota of lean and obese humans, (3) the impact of diet on the gut microbiota, (4) manipulating the gut microbiota and (5) the mechanisms by which the gut microbiota can impact on weight gain. PMID:22572830

  13. Lean manufacturing: A better way for enhancement in productivity

    Science.gov (United States)

    Kumar Ahir, Pankaj; Kumar Yadav, Lalit; Singh Chandrawat, Saurabh

    2012-03-01

    Productivity is the impact of peoples working together. Machines are merely an extended way of collective imagination and energy. Lean Manufacturing is the most used method for continues improvement of business. Organization management philosophy focusing on the reduction of wastage to improve overall customer value. "Lean" operating principles began in manufacturing environments and are known by a variety of synonyms; Lean Manufacturing, Lean Production, Toyota Production System, etc. It is commonly believed that Lean started in Japan "The notable activities in keeping the price of Ford products low is the steady restriction of the production cycle. The longer an article is in the process of manufacture and the more it is moved about, the greater is its ultimate cost." "A systematic approach to identifying and eliminating waste through continuous improvement, flowing the product at the pull of the customer in pursuit of perfection."

  14. Is there a lean future for global startups?

    DEFF Research Database (Denmark)

    Tanev, Stoyan

    2017-01-01

    This article integrates insights from the latest research on the lean startup entrepreneurial method, born-global firms, and global startups. It contributes to the clarification of terminology referring to the global aspects of startups, summarizes insights from previous literature focusing on gl......-based global startup research and practice. The analysis should benefit both researchers and practitioners in technology entrepreneurship, international entrepreneurship, and global innovation management.......This article integrates insights from the latest research on the lean startup entrepreneurial method, born-global firms, and global startups. It contributes to the clarification of terminology referring to the global aspects of startups, summarizes insights from previous literature focusing...... on global startups, and further substantiates the articulation of the need for considering the lean global startup as a new type of firm. The main message is that the lessons learned from the emergence of lean startup entrepreneurship offer a basis for promoting a similar lean phase in technology...

  15. Lean principles applied to software development – avoiding waste

    Directory of Open Access Journals (Sweden)

    Ionel NAFTANAILA

    2009-12-01

    Full Text Available Under the current economic conditions many organizations strive to continue the trend towards adopting better software development processes, in order to take advantage of the numerous benefits that these can offer. Those benefits include quicker return on investment, better software quality, and higher customer satisfaction. To date, however, there is little body of research that can guide organizations in adopting modern software development practices, especially when it comes to Lean thinking and principles. To address this situation, the current paper identifies and structures the main wastes (or muda in Lean terms in software development as described by Lean principles, in an attempt to bring into researchers’ and practitioners’ attention Lean Software Development, a modern development methodology based on well-established practices such as Lean Manufacturing or Toyota Production System.

  16. The lean product design and development journey a practical view

    CERN Document Server

    Pessôa, Marcus Vinicius Pereira

    2017-01-01

    This book presents a series of high performance product design (PD) and development best practices that can create or improve product development organization. In contrast to other books that focus only on Toyota or other individual companies applying lean IPD, this book explains the lean philosophy more broadly and includes discussions of systems engineering, design for X (DFX), agile development, integrated product development, and project management. The “Lean Journey” proposed here takes a value-centric approach, where the lean principles are applied to PD to allow the tools and methods selected to emerge from observation of the individual characteristics of each enterprise. This means that understanding lean product development (LPD) is not about knowing which tools are available but knowing how to apply the philosophy. The book comes with an accompanying manual with problems and solutions available on Springer Extras.

  17. LEAN THINKING IN HEALTHCARE: REVIEW OF IMPLEMENTATION RESULTS

    Directory of Open Access Journals (Sweden)

    Marija Kovacevic

    2016-03-01

    Full Text Available For over decade, automotive industry originated lean concept has been successfully implemented in healthcare systems as a management method and philosophy with main focus on elimination of all types of wastes and looses in all tasks and processes so that time, materials, resources and medical procedures could be realized as effectively as it is possible. As main result lean concept implementation ensured to healthcare organizations to focus on their main core function and dedicate more time and efforts to patients without additional costs for them or healthcare system. However, lean implementation in healthcare could be much more difficult than in standard industrial environment and there are significant number of examples of lean in healthcare projects that failed to gain any measurable results and sustainable benefits from it. This paper presents review of some of the most successful implementations of lean tools and principles in healthcare organizations.

  18. Individualisation of Lean Concept in Companies Dealing with Mass Production

    Science.gov (United States)

    Bednár, Roman

    2012-12-01

    The methods of lean manufacturing primarily designed for businesses dealing with serial production, are also used in other types of production. However the concept of lean production was not designed for these types of businesses, they are utilized only partially. Paper focuses on applying methods of lean concept in companies which are dealing with mass production and their options of exchange for other methods in the event of disagreement. Basis of the article is a list of lean methods with its description and its utilization in practice. The questionnaire was utilized to identify information from the practice. Based on this survey were identified the critical methods that are no longer appropriate for companies dealing with mass production. However, there are alternative methods of describing the problem. It is possible to say that companies are trying to get closer to their goal by modification of the basic concepts. And the concept of Lean Enterprise serves as a standard.

  19. The application of lean principles in product development

    DEFF Research Database (Denmark)

    Bjarnø, Ole-Christian

    2007-01-01

    Although Lean Manufacturing has been a megatrend for several years, its principles have not been broadly applied in product development processes. We have therefore found it useful to look into the theories of lean manufacturing and to discuss how and to what extent they could be applied in the p......Although Lean Manufacturing has been a megatrend for several years, its principles have not been broadly applied in product development processes. We have therefore found it useful to look into the theories of lean manufacturing and to discuss how and to what extent they could be applied...... in the product development processes, and this study is compared with industrial practices in several front running companies in Denmark. From this research a suggestion for a framework and a tool-box for lean product development is created and discussed from a HR management, an implementation, an operational...

  20. Conservation endocrinology

    Science.gov (United States)

    McCormick, Stephen; Romero, L. Michael

    2017-01-01

    Endocrinologists can make significant contributions to conservation biology by helping to understand the mechanisms by which organisms cope with changing environments. Field endocrine techniques have advanced rapidly in recent years and can provide substantial information on the growth, stress, and reproductive status of individual animals, thereby providing insight into current and future responses of populations to changes in the environment. Environmental stressors and reproductive status can be detected nonlethally by measuring a number of endocrine-related endpoints, including steroids in plasma, living and nonliving tissue, urine, and feces. Information on the environmental or endocrine requirements of individual species for normal growth, development, and reproduction will provide critical information for species and ecosystem conservation. For many taxa, basic information on endocrinology is lacking, and advances in conservation endocrinology will require approaches that are both “basic” and “applied” and include integration of laboratory and field approaches.

  1. Serum Predictors of Percent Lean Mass in Young Adults.

    Science.gov (United States)

    Lustgarten, Michael S; Price, Lori L; Phillips, Edward M; Kirn, Dylan R; Mills, John; Fielding, Roger A

    2016-08-01

    Lustgarten, MS, Price, LL, Phillips, EM, Kirn, DR, Mills, J, and Fielding, RA. Serum predictors of percent lean mass in young adults. J Strength Cond Res 30(8): 2194-2201, 2016-Elevated lean (skeletal muscle) mass is associated with increased muscle strength and anaerobic exercise performance, whereas low levels of lean mass are associated with insulin resistance and sarcopenia. Therefore, studies aimed at obtaining an improved understanding of mechanisms related to the quantity of lean mass are of interest. Percent lean mass (total lean mass/body weight × 100) in 77 young subjects (18-35 years) was measured with dual-energy x-ray absorptiometry. Twenty analytes and 296 metabolites were evaluated with the use of the standard chemistry screen and mass spectrometry-based metabolomic profiling, respectively. Sex-adjusted multivariable linear regression was used to determine serum analytes and metabolites significantly (p ≤ 0.05 and q ≤ 0.30) associated with the percent lean mass. Two enzymes (alkaline phosphatase and serum glutamate oxaloacetate aminotransferase) and 29 metabolites were found to be significantly associated with the percent lean mass, including metabolites related to microbial metabolism, uremia, inflammation, oxidative stress, branched-chain amino acid metabolism, insulin sensitivity, glycerolipid metabolism, and xenobiotics. Use of sex-adjusted stepwise regression to obtain a final covariate predictor model identified the combination of 5 analytes and metabolites as overall predictors of the percent lean mass (model R = 82.5%). Collectively, these data suggest that a complex interplay of various metabolic processes underlies the maintenance of lean mass in young healthy adults.

  2. Available phosphorus levels for 95 to 120 kg barrows genetically selected for lean gain

    Directory of Open Access Journals (Sweden)

    Cláudio Luís Corrêa Arouca

    2012-06-01

    Full Text Available With the objective of evaluating available phosphorus (aP levels in diets for barrows selected for lean meat deposition, eighty commercial hybrid pigs with initial weight of 94.05±1.05 kg were used in this experiment. Pigs were allotted in a completely randomized block design, with five treatments (0.092, 0.156, 0.220, 0,284, and 0.348% of aP, eight replicates and two pigs per experimental unit. The average daily weight gain of pigs increased and the feed conversion improved quadratically with increasing aP in the diets up to the estimated levels of 0.21 and 0.20%, respectively. There was no effect of the dietary aP on average daily feed intake. However, aP intake, bone strength and concentration of phosphorus in the bones increased linearly with increasing aP in the diets. The levels of aP did not affect carcass traits; however, the alkaline phosphatase activity was improved and the values of serum inorganic phosphorus increased quadratically up to the estimated levels of 0.26 and 0.27% of aP, respectively. The available phosphorus levels of 0.21, 0.27, and 0.35%, corresponding to daily aP intakes of 6.34, 8.13, and 10.44 g result, respectively, in greatest performance, blood and bone parameters of 95 to 120 kg barrows selected for lean gain.

  3. Low-fiber diet

    Science.gov (United States)

    ... residue; Low-fiber diet; Fiber restricted diet; Crohn disease - low fiber diet; Ulcerative colitis - low fiber diet; ... them if they do not contain seeds or pulp: Yellow squash (without seeds) Spinach Pumpkin Eggplant Potatoes, ...

  4. Lean IT partnering : How partners create value by developing a lean culture for IT supply and management

    NARCIS (Netherlands)

    Zee, van der J.T.M.; Blijleven, V.B; Gong, Y.

    2015-01-01

    Lean, as a philosophy, has been around for quite some time, predominantly in the manufacturing domain. Since the 1990s Lean management provides organizations with a way to achieve superior performance by focusing on customer value, innovation and productivity. In 2011 Steven Bell and Michael Orzen

  5. Beneficial effects of curcumin nano-emulsion on spermatogenesis and reproductive performance in male rats under protein deficient diet model: enhancement of sperm motility, conservancy of testicular tissue integrity, cell energy and seminal plasma amino acids content.

    Science.gov (United States)

    Ahmed-Farid, Omar A H; Nasr, Maha; Ahmed, Rania F; Bakeer, Rofanda M

    2017-09-02

    Malnutrition resulting from protein and calorie deficiency continues to be a major concern worldwide especially in developing countries. Specific deficiencies in the protein intake can adversely influence reproductive performance. The present study aimed to evaluate the effects of curcumin and curcumin nano-emulsion on protein deficient diet (PDD)-induced testicular atrophy, troubled spermatogenesis and decreased reproductive performance in male rats. Juvenile rats were fed the protein deficient diet (PDD) for 75 days. Starting from day 60 the rats were divided into 4 groups and given the corresponding treatments for the last 15 days orally and daily as follows: 1st group; curcumin group (C) received 50 mg/kg curcumin p.o. 2 nd group; curcumin nano-form low dose group (NCL) received 2.5 mg/kg nano-curcumin. 3rd group; curcumin nano-form high dose group (NCH) received 5 mg/kg nano-curcumin. 4th group served as malnutrition group (PDD group) receiving the protein deficient diet daily for 75 days and received distilled water ingestions (5 ml/kg p.o) daily for the last 15 days of the experiment. A normal control group was kept under the same conditions for the whole experiment and received normal diet according to nutrition requirement center daily for 75 days and received distilled water ingestions (5 ml/kg p.o) daily for the last 15 days of the experiment. PDD induced significant (P curcumin (50 mg/kg) and curcumin nano-emulsion (2.5 and 5 mg/kg) showed significant (Pcurcumin (50 mg/kg). The present study suggests that administration of curcumin nano-emulsion as a daily supplement would be beneficial in malnutrition- induced troubled male reproductive performance and spermatogenesis cases.

  6. Lean practices for quality results: a case illustration.

    Science.gov (United States)

    Hwang, Pauline; Hwang, David; Hong, Paul

    2014-01-01

    Increasingly, healthcare providers are implementing lean practices to achieve quality results. Implementing lean healthcare practices is unique compared to manufacturing and other service industries. The purpose of this paper is to present a model that identifies and defines the lean implementation key success factors in healthcare organisations. The model is based on an extant literature review and a case illustration that explores actual lean implementation in a major USA hospital located in a Midwestern city (approximately 300,000 people). An exploratory/descriptive study using observation and follow-up interviews was conducted to identify lean practices in the hospital. Lean practice key drivers include growing elderly populations, rising medical expenses, decreasing insurance coverage and decreasing management support. Effectively implementing lean practices to increase bottom-line results and improve organisational integrity requires sharing goals and processes among healthcare managers and professionals. An illustration explains the model and the study provides a sound foundation for empirical work. Practical implications are included. Lean practices minimise waste and unnecessary hospital stays while simultaneously enhancing customer values and deploying resources in supply systems. Leadership requires clear project targets based on sound front-end planning because initial implementation steps involve uncertainty and ambiguity (i.e. fuzzy front-end planning). Since top management support is crucial for implementing lean practices successfully, a heavyweight manager, who communicates well both with top managers and project team members, is an important success factor when implementing lean practices. Increasingly, green orientation and sustainability initiatives are phrases that replaced lean practices. Effective results; e.g. waste reduction, employee satisfaction and customer values are applicable to bigger competitive challenges arising both in specific

  7. Lean process management implementation through enhanced problem solving capabilities

    Directory of Open Access Journals (Sweden)

    Perumal Puvanasvaran

    2010-12-01

    Full Text Available All Original Equipment Manufacturers (OEM organizations in Aerospace, Automotive and Electronics industries had to upgrade their functions. These organizations including suppliers and solutions providers are duty bound to improve their functions through strategic initiatives. One such initiative is Lean Process Management. Lean Process Management has proven to aid organizations in developing manufacturing and administrative management solutions and make the organization a leaner at the same time a ‘fitter’ one, achieving World Class standards in terms of production, quality, marketing, etc, etc. The issue or problem is, although a number of authors, experts, researchers have discussed the lean process management as part organization centric issues, they failed to provide an effective lean process management system. Besides the need to formulate an effective lean process as suggested by some authors, another important reason suggested is the employee’s development aspect regarding how to unlock the infinite potential of their workforce. This employee’s development is basically the problem solving capabilities of the employees while implementing the Lean through clear cutting protocols or processes of Lean Process Management. The employees need to be developed and equipped to contribute optimally to the process. Because of this scenario, the main objective of this study is to develop an employees development system which the author has acronym or trademark it as People Development System (PDS to enhance problem solving capability among its employees while implementing the lean process management there. Although, the PDS can be implemented throughout the organization, if it is implemented in a particular department in an organization, it will be feasible to study and analyze its effectiveness in-depth. So, this study documents and analyzes the implementation of Lean process in the Kitting Department of the aerospace company, ABC Company

  8. [Conservation Units.

    Science.gov (United States)

    Texas Education Agency, Austin.

    Each of the six instructional units deals with one aspect of conservation: forests, water, rangeland, minerals (petroleum), and soil. The area of the elementary school curriculum with which each correlates is indicated. Lists of general and specific objectives are followed by suggested teaching procedures, including ideas for introducing the…

  9. Creative conservation

    NARCIS (Netherlands)

    Bentham, Roelof J.

    1968-01-01

    The increasing exploitation of our natural resources, the unlimited occupation of ever more new areas, and the intensification of land-use, make it necessary for us to expand the concept of conservation. But we also need to reconsider that concept itself. For the changing conditions in the

  10. Reshaping conservation

    DEFF Research Database (Denmark)

    Funder, Mikkel; Danielsen, Finn; Ngaga, Yonika

    2013-01-01

    members strengthen the monitoring practices to their advantage, and to some extent move them beyond the reach of government agencies and conservation and development practitioners. This has led to outcomes that are of greater social and strategic value to communities than the original 'planned' benefits...

  11. Lean and global technology start-ups

    DEFF Research Database (Denmark)

    Tanev, Stoyan; Rasmussen, Erik Stavnsager; Zijdemans, Erik

    2015-01-01

    In this paper the authors introduce the concept of Lean Global Start-up (LGS) as a way of emphasizing the impossibility for new technology start-ups to deal separately with business development, innovation and early internationalization. For a newly established technology firm the task of being...... global and innovative at the same time should be seen as one process. The paper has two components – an introductory conceptual part and an empirical part that should be considered as basis for the preliminary validation of the conceptual insights. The research sample includes six firms – three from...... Canada and three from Denmark. The firms have had significant problems with the complexity, uncertainties and risks of being innovative on a global scale. They have however found ways of addressing these problems by a disciplined knowledge sharing and IP protection strategy and the efficient use...

  12. Lean construction management the Toyota way

    CERN Document Server

    Gao, Shang

    2014-01-01

    The book presents a mixed research method adopted to assess and present the Toyota Way practices within construction firms in general and for firms in China specifically. The results of an extensive structured questionnaire survey based on the Toyota Way-styled attributes identified were developed, and data collected from building professionals working in construction firms is presented. The quantitative data presented in the book explains the status quo of the Toyota Way-styled practices implemented in the construction industry, as well as the extent to which these attributes were perceived for lean construction management. The book highlights all the actionable attributes derived from the Toyota Way model appreciated by the building professionals, but alerts the readers that some attributes felled short of implementation. Further findings from in-depth interviews and case studies are also presented in the book to provide to readers an understanding how these Toyota Way practices can be implemented in real-l...

  13. The role of outsourcing in Lean Manufacturing

    DEFF Research Database (Denmark)

    Bjarnø, Ole-Christian

    2003-01-01

    In this article a longitudinal study performed at a medium-sized producer of electronics is reported during which we studied the company’s manufacturing change process. Based on theories of outsourcing, reengineering and explorative case research a series of findings is identified which demonstra......In this article a longitudinal study performed at a medium-sized producer of electronics is reported during which we studied the company’s manufacturing change process. Based on theories of outsourcing, reengineering and explorative case research a series of findings is identified which...... degree of complexity by introducing many new product lines, without phasing out very many of the old products could be changed into a far less complex organisation through reengineering and outsourcing. This again opened up for the application of the tool kit in Lean Manufacturing, and through...

  14. Complex Relationships Between Food, Diet, and the Microbiome.

    Science.gov (United States)

    Pace, Laura A; Crowe, Sheila E

    2016-06-01

    Diet is a risk factor in several medically important disease states, including obesity, celiac disease, and functional gastrointestinal disorders. Modification of diet can prevent, treat, or alleviate some of the symptoms associated with these diseases and improve general health. It is important to provide patients with simple dietary recommendations to increase the probability of successful implementation. These recommendations include increasing vegetable, fruit, and fiber intake, consuming lean protein sources to enhance satiety, avoiding or severely limiting highly processed foods, and reducing portion sizes for overweight and obese patients. Copyright © 2016 Elsevier Inc. All rights reserved.

  15. The challenges of lean manufacturing implementation in kitting assembly

    Science.gov (United States)

    Fansuri, A. F. H.; Rose, A. N. M.; Nik Mohamed, N. M. Z.; Ahmad, H.

    2017-10-01

    Literature studies shows that lean manufacturing goes way back with the original founder Eli Whitney in year 1799. The main purpose of lean manufacturing is to identify and eliminate waste in production. The application of lean manufacturing can be carried out in any industrial processes with regards to the understanding of lean principles, theories and practices. Kitting is one of the important aspects in a successful production. The continuous supply of materials from store to production has to be systematic and able to achieve lean standard for it to be successful. The objective of this paper is to review the implementation of lean manufacturing in kitting assembly. Previous papers show that, the implementation of lean manufacturing in kitting assembly may be beneficial to the organization such as reduce in space occupancy, part shortages, lead time and manpower. Based on previous research, some industries may tend to change between kitting and line stocking which are due to lack of understanding when implementing kitting and causes longer lead time and materials overflow in store. With a proper understanding on what to kit, where to kit, how to kit, why to kit and who kits the material with a standardised process flow may ensure the success of kitting.

  16. Lean implementation strategies: how are the Toyota way principles addressed?

    Directory of Open Access Journals (Sweden)

    Coetzee, Rojanette

    2016-11-01

    Full Text Available Lean manufacturing is widely considered to be a proven organisational improvement philosophy, yet the success rate of lean implementation in industry remains relatively low. Neglect of the human aspect of lean manufacturing is often cited as the leading reason for this, despite the emphasis so clearly placed upon this aspect by the creators of the lean philosophy. This article reviews the extent to which the human dimensions of the lean philosophy, as described in the Toyota Way management principles, have been incorporated in lean implementation strategies. It is found that few of the principles feature prominently in these strategies. Notably absent are those linked to the ‘respect for people’ pillar , which forms half of the T oyota Way’s foundation. This conclusion indicates that the adoption of the lean philosophy runs contrary to the oft-repeated message from its creators that no tenet of the philosophy should be favoured at the expense of another. This may provide valuable insight into the reasons for the high implementation failure rate.

  17. Medical and scientific writing: Time to go lean and mean

    Directory of Open Access Journals (Sweden)

    Payal Bhardwaj

    2017-01-01

    Full Text Available The Lean Six Sigma methodology for process improvements and driving efficiency is old, but lean writing was adopted late by the pharmaceutical world in terms of size of the documents. The documents were lean earlier, and then became voluminous, and now we are about to complete a full circle in this regard, i.e., coming back to the lean documents again using e-formats and hyperlinking. Furthermore, writing has become more and more precise over time. The need for this lean and mean medical and scientific writing arose from voluminous research globally, both industry and academia which are abuzz with skyrocketing regulatory and scientific submission volumes. The quantum of literature is so much that reviewers or information seekers firmly believe that going through even selected and relevant literature has become highly challenging. Considering this, there has been much insistence on downsizing the medical writing documents, which could be tempting enough to be leveraged for scientific publications as well. Here, we present the need for lean and mean medical writing, discuss this concept in relation to the pharmaceutical industry, and how to apply this to key documents. Furthermore, presented is the proposed algorithm for lean and mean clinical study reports and manuscripts. These thoughts are aligned to the recently established concept of data transparency, and can be easily achieved by web links between the protocols and clinical trial results disclosed publicly, and the corresponding manuscripts.

  18. Improvement of emergency department patient flow using lean thinking.

    Science.gov (United States)

    Sánchez, Miquel; Suárez, Montse; Asenjo, María; Bragulat, Ernest

    2018-05-01

    To apply lean thinking in triage acuity level-3 patients in order to improve emergency department (ED) throughtput and waiting time. A prospective interventional study. An ED of a tertiary care hospital. Triage acuity level-3 patients. To apply lean techniques such as value stream mapping, workplace organization, reduction of wastes and standardization by the frontline staff. Two periods were compared: (i) pre-lean: April-September, 2015; and (ii) post-lean: April-September, 2016. Variables included: median process time (time from beginning of nurse preparation to the end of nurse finalization after doctor disposition) of both discharged and transferred to observation patients; median length of stay; median waiting time; left without being seen, 72-h revisit and mortality rates, and daily number of visits. There was no additional staff or bed after lean implementation. Despite an increment in the daily number of visits (+8.3%, P lean implementation. No significant differences were registered in left without being seen rate (5.23% vs 4.95%), 72-h revisit rate (3.41% vs 3.93%), and mortality rate (0.23% vs 0.15%). Lean thinking is a methodology that can improve triage acuity level-3 patient flow in the ED, resulting in better throughput along with reduced waiting time.

  19. Lean og professionel autonomi på hospitaler

    DEFF Research Database (Denmark)

    Hasle, Peter

    2014-01-01

    Hospitaler står overfor store udfordringer fra voksende krav fra både patienter og samfund samtidig med begrænsede budgetter og stadig flere medicinske muligheder. Hospitalsledelserne anvender lean som en af de væsentligste metoder til at løse disse udfordringer. Lean stammer imidlertid fra...... industrien, og det er spørgsmålet, hvordan lean bliver tilpasset i til en hospitalssammenhæng, og hvilke konsekvenser lean får for medarbejderne. Dette spørgsmål er undersøgt i forbindelse med introduktion af lean i en kræftafdeling på et universitetshospital. Det viste sig vanskeligere end forventet...... at implementere lean, og konsekvenserne for henholdsvis laboranter og sygeplejersker viste sig at være meget forskelligartede. Laboranterne oplevede et forbedret arbejdsmiljø, mens det modsatte var tilfældet for sygeplejerskerne. En mulig forklaring er, at lean øgede kontrollen over eget arbejde for laboranterne...

  20. Acceptance of lean redesigns in primary care: A contextual analysis.

    Science.gov (United States)

    Hung, Dorothy; Gray, Caroline; Martinez, Meghan; Schmittdiel, Julie; Harrison, Michael I

    Lean is a leading change strategy used in health care to achieve short-term efficiency and quality improvement while promising longer-term system transformation. Most research examines Lean intervention to address isolated problems, rather than to achieve broader systemic changes to care delivery. Moreover, no studies examine contextual influences on system-wide Lean implementation efforts in primary care. The aim of this study was to identify contextual factors most critical to implementing and scaling Lean redesigns across all primary care clinics in a large, ambulatory care delivery system. Over 100 interviews and focus groups were conducted with frontline physicians, clinical staff, and operational leaders. Data analysis was guided by a modified Consolidated Framework for Implementation Research (CFIR), a popular implementation science framework. On the basis of expert recommendations, the modified framework targets factors influencing the implementation of process redesigns. This modified framework, the CFIR-PR, informed our identification of contextual factors that most impacted Lean acceptance among frontline physicians and staff. Several domains identified by the CFIR-PR were critical to acceptance of Lean redesigns. Regarding the implementation process acceptance was influenced by time and intensity of exposure to changes, "top-down" versus "bottom-up" implementation styles, and degrees of employee engagement in developing new workflows. Important factors in the inner setting were the clinic's culture and style of leadership, along with availability of information about Lean's effectiveness. Last, implementation efforts were impacted by individual and team characteristics regarding changed work roles and related issues of professional identity, authority, and autonomy. This study underscores the need for change leaders to consider the contextual factors that surround efforts to implement Lean in primary care. As Lean redesigns are scaled across a system

  1. Conservation of Charge and Conservation of Current

    OpenAIRE

    Eisenberg, Bob

    2016-01-01

    Conservation of current and conservation of charge are nearly the same thing: when enough is known about charge movement, conservation of current can be derived from conservation of charge, in ideal dielectrics, for example. Conservation of current is enforced implicitly in ideal dielectrics by theories that conserve charge. But charge movement in real materials like semiconductors or ionic solutions is never ideal. We present an apparently universal derivation of conservation of current and ...

  2. Lean production teams and health in garment manufacture.

    Science.gov (United States)

    Jackson, P R; Mullarkey, S

    2000-04-01

    The impact of lean production on psychological health was assessed by comparing lean production teams in garment manufacture with a traditional system for making similar garments. Work design characteristics were examined as mediators of the impact of work organization on health. Findings indicate both positive and negative direct effects of teamworking on aspects of autonomy, work demands, and social climate. In turn, both positive and negative direct effects of work design on psychological health were found, which combine to give no overall difference between the groups. This study suggests that the balance between positive and negative effects of lean production teamworking depends on management choices in the form of work design.

  3. Implementation analysis of lean enablers for managing engineering programs

    DEFF Research Database (Denmark)

    von Arnim, Joachim; Oehmen, Josef; Rebentisch, Eric

    2014-01-01

    This paper presents research to improve the applicability of the Lean Enablers and consists of two parts. The first is a case study of a very successful project management maturity improvement initiative at Siemens Industry Sector’s Industry Automation division in the US. It views the initiative...... from the perspective of the Lean Enablers [Oehmen 2012] and is based on information from [Sopko 2012a], [Sopko 2012b], [Sopko 2010], [Sopko 2009], interviews, internal documentation, and the used MSP program management methodology [UK 2011]. The analysis of Lean Enablers incorporated in the MSP...

  4. Lean Manufacturing Implementation: an Approach to Reduce Production Cost

    Directory of Open Access Journals (Sweden)

    Iraswari

    2012-04-01

    Full Text Available Abstract: Lean Manufacturing Implementation: An Approach To Reduce Production Cost. Opportunities to improve production processes and reduce production cost through the implementation of lean manufacturing in small medium garment manufacturing are presented in this research. This research shows that there is a possibility of decrease in production cost and increase in return on sales. Lean manufacturing implementation can eliminate waste in the production process. This is a set of techniques for identification and elimination of waste gathered from The Ford Production, Statistical Process Control and other techniques. Improvement of quality could be carried out while time and cost of production are being reduced.

  5. Lean Management as an Instrument of Sustainable Development of Enterprises

    Science.gov (United States)

    Sikora, Marcin; Kwiatkowski, Maciej; Prosół, Hanna; Nowicka, Daria; Lorenc, Karolina; Pham, Laurena

    2016-03-01

    The aim of the paper is to present the philosophy of Lean Management as an instrument of improving sustainable management of enterprises. The article presents the origins, characteristics of the broadly understood concept of Lean Management and describes the idea of Sustainable Development (SD). At the same time implications for the application and development of the instruments which operationalize the assumptions of SD at the level of enterprises are discussed. The paper specifies those areas of functioning of contemporary companies in which Lean Management can be implemented and compares them with the features of traditional management in particular subjects.

  6. Effects of caloric intake timing on insulin resistance and hyperandrogenism in lean women with polycystic ovary syndrome.

    Science.gov (United States)

    Jakubowicz, Daniela; Barnea, Maayan; Wainstein, Julio; Froy, Oren

    2013-11-01

    In women with PCOS (polycystic ovary syndrome), hyperinsulinaemia stimulates ovarian cytochrome P450c17α activity that, in turn, stimulates ovarian androgen production. Our objective was to compare whether timed caloric intake differentially influences insulin resistance and hyperandrogenism in lean PCOS women. A total of 60 lean PCOS women [BMI (body mass index), 23.7±0.2 kg/m²] were randomized into two isocaloric (~1800 kcal; where 1 kcal≈4.184 J) maintenance diets with different meal timing distribution: a BF (breakfast diet) (980 kcal breakfast, 640 kcal lunch and 190 kcal dinner) or a D (dinner diet) group (190 kcal breakfast, 640 kcal lunch and 980 kcal dinner) for 90 days. In the BF group, a significant decrease was observed in both AUC(glucose) (glucose area under the curve) and AUC(insulin) (insulin area under the curve) by 7 and 54% respectively. In the BF group, free testosterone decreased by 50% and SHBG (sex hormone-binding globulin) increased by 105%. GnRH (gonadotropin-releasing hormone)-stimulated peak serum 17OHP (17α-hydroxyprogesterone) decreased by 39%. No change in these parameters was observed in the D group. In addition, women in the BF group had an increased ovulation rate. In lean PCOS women, a high caloric intake at breakfast with reduced intake at dinner results in improved insulin sensitivity indices and reduced cytochrome P450c17α activity, which ameliorates hyperandrogenism and improves ovulation rate. Meal timing and distribution should be considered as a therapeutic option for women with PCOS.

  7. Exercise Alters Gut Microbiota Composition and Function in Lean and Obese Humans.

    Science.gov (United States)

    Allen, Jacob M; Mailing, Lucy J; Niemiro, Grace M; Moore, Rachel; Cook, Marc D; White, Bryan A; Holscher, Hannah D; Woods, Jeffrey A

    2018-04-01

    Exercise is associated with altered gut microbial composition, but studies have not investigated whether the gut microbiota and associated metabolites are modulated by exercise training in humans. We explored the impact of 6 wk of endurance exercise on the composition, functional capacity, and metabolic output of the gut microbiota in lean and obese adults with multiple-day dietary controls before outcome variable collection. Thirty-two lean (n = 18 [9 female]) and obese (n = 14 [11 female]), previously sedentary subjects participated in 6 wk of supervised, endurance-based exercise training (3 d·wk) that progressed from 30 to 60 min·d and from moderate (60% of HR reserve) to vigorous intensity (75% HR reserve). Subsequently, participants returned to a sedentary lifestyle activity for a 6-wk washout period. Fecal samples were collected before and after 6 wk of exercise, as well as after the sedentary washout period, with 3-d dietary controls in place before each collection. β-diversity analysis revealed that exercise-induced alterations of the gut microbiota were dependent on obesity status. Exercise increased fecal concentrations of short-chain fatty acids in lean, but not obese, participants. Exercise-induced shifts in metabolic output of the microbiota paralleled changes in bacterial genes and taxa capable of short-chain fatty acid production. Lastly, exercise-induced changes in the microbiota were largely reversed once exercise training ceased. These findings suggest that exercise training induces compositional and functional changes in the human gut microbiota that are dependent on obesity status, independent of diet and contingent on the sustainment of exercise.

  8. Evaluation of Hypocaloric Diet With Protein Supplementation in Middle-Aged Sarcopenic Obese Women: A Pilot Study

    OpenAIRE

    Sammarco, Rosa; Marra, Maurizio; Di Guglielmo, Maria Luisa; Naccarato, Marianna; Contaldo, Franco; Poggiogalle, Eleonora; Donini, Lorenzo Maria; Pasanisi, Fabrizio

    2017-01-01

    Objective: The aim of this study was to evaluate the efficacy of a nutritional program, which is characterized by a different modulation of proteins, in adult patients with sarcopenic obesity. Methods: We studied 18 obese women aged 41-74 years. Obesity was diagnosed as fat mass > 34.8% and sarcopenia was defined when lean body mass was Results: Weight significantly decreased in both groups. Women with high-protein diet preserved lean body mass compared to low-calorie diet and improved signif...

  9. VLCD compliance and lean body mass

    DEFF Research Database (Denmark)

    Astrup, A; Quaade, F

    1989-01-01

    Very low calorie diets (VLCD) have many advantages, as they are inexpensive, safe and easy to comply with, and give rapid and encouraging weight loss. On the other hand, many patients complain of hunger and constipation. We have shown that these drawbacks can be reduced by the supplementation of ...

  10. Relationship between lipogenesis, ketogenesis, and malonyl-CoA content in isolated hepatocytes from the obese Zucker rat adapted to a high-fat diet.

    Science.gov (United States)

    Malewiak, M I; Griglio, S; Le Liepvre, X

    1985-07-01

    The relationship between lipogenesis and ketogenesis and the concentration of malonyl coenzyme A (CoA) was investigated in hepatocytes from adult obese Zucker rats and their lean littermates fed either a control low-fat diet or a high-fat diet (30% lard in weight). With the control diet, lipogenesis--although strongly inhibited in the presence of either 1 mmol/L oleate, 10(-6) mol/L glucagon or 0.1 mmol/L TOFA (a hypolipidemic drug)--remained about fifteen-fold higher in the obese rats than in the lean rats. In contrast, ketogenesis under some conditions (oleate + TOFA) was not significantly lower (30%) as compared with the lean rats. After adaptation to the high-fat diet, lipogenesis was depressed fourfold in the lean rats and ninefold in the obese ones; however its magnitude remained significantly higher in the latter, namely at a value close to that measured in control-fed lean rats. Ketogenesis was comparable in lean and obese rats and much higher in the presence of 1 mmol/L oleate than of 0.3 mmol/L oleate, whereas lipogenesis did not vary with increasing oleate concentration in the medium. Acetyl-CoA carboxylase activity measured in liver homogenates was higher in the obese group, but was stepwise inhibited by increasing concentrations of oleyl-CoA regardless of the diet for both lean and obese rats, thus showing no abnormality of in vitro responsiveness to this inhibitor. With the control diet, hepatocyte malonyl-CoA levels were significantly higher in the obese rats, both in the basal state and after inhibition of lipogenesis by oleate and TOFA.(ABSTRACT TRUNCATED AT 250 WORDS)

  11. Collateral fattening: When a deficit in lean body mass drives overeating.

    Science.gov (United States)

    Dulloo, Abdul G

    2017-02-01

    In his last review entitled "Some Adventures in Body Composition," Gilbert Forbes reminded us that "lean body mass and body fat are in a sense companions." To what extent the lean body mass (or fat-free mass) component in this companionship impacts on energy intake is rarely a topic for discussion, amid a dominant adipocentric view of appetite control. Yet an analysis of the few human studies that have investigated the relationships between objectively measured food intake and body composition reveals a potentially important role for both an increase and a decrease in fat-free mass in the drive to eat. These studies are highlighted here, together with the implications of their findings for research directed as much toward the elucidation of peripheral signals and energy-sensing mechanisms that drive hunger and appetite, as toward understanding the mechanisms by which dieting and sedentariness predispose to fatness. © 2017 The Authors. Obesity published by Wiley Periodicals, Inc. on behalf of The Obesity Society (TOS).

  12. Lean Manufacturing e Lean Accounting Cost: um enfoque no real desempenho em empresas de capital aberto na BOVESPA

    OpenAIRE

    Teixeira, Hipólito Francisco

    2016-01-01

    Esta pesquisa teve por alvo o campo de estudo denominado Lean Accounting (LA) aplicado as empresas que adotam os procedimentos de Produção Enxuta (PE). As empresas neste ambiente competitivo e muito imprevisivel têm procuradoadotar decisões e procedimentos voltadosa valorizar sua própria continuidade e diferencial para se expor perante ao mercado. Neste sentido novas tecnologias de produção e controles contábeis são necessários. Lean Accounting (LA) ou Contabilidade Lean ou “enxuta” pode s...

  13. Lean and the working environment: a review of the literature

    DEFF Research Database (Denmark)

    Hasle, Peter; Bojesen, Anders; Jensen, Per Langaa

    2012-01-01

    for the negative impact of lean on both the working environment and employee health and well-being in cases of manual work with low complexity. However, since examples of positive effects were also found in the literature, it is important to move from a simple cause-and-effect model to a more comprehensive model...... of manufacturing industry. The literature reflects, only to a limited extent, on the significance of implementation strategy and production context. Practical implications - Organizations working with lean should make efforts to avoid an impaired working environment for manual employees. Involvement of employees......Purpose - The effects of lean on employees have been debated ever since the concept was introduced. The purpose of this paper is to review the scientific literature on the effects of lean on the working environment and employee health and well-being. Design/methodology/approach - Relevant databases...

  14. The Effects of Application of Lean Concept in Retail

    Directory of Open Access Journals (Sweden)

    Radojko LUKIC

    2012-06-01

    Full Text Available Lean principles and techniques can be successfully applied in the retail sector. In the retail sector, lean approach improves operational flows. Lean retail encourages manufacturers to produce standard products in accordance with the created (placed orders from retailers pursuant to the demand of their consumers. Characteristics of the retail market are: strong competition, shorter product life cycle, longer product development time and high sensitivity of demand. In order to be more competitive and profitable today's retailers operate strategically oriented to lower prices and gain exemption from holding unnecessary stocks. Lean retail is an example of best practices of successful operational strategies which management need to accept - to maximize the operating efficiency of the retail process.

  15. Succesful Lean Manufacturing Implementation: Internal Key Influencing Factors

    Science.gov (United States)

    Virginia, Iuga; Claudiu, Kifor

    2015-09-01

    Manufacturing sectors and companies all over the world are successfully implementing lean principles within their processes. Nowadays, lean has become an indispensable part of global players. Companies worldwide need to be aware of multiple factors which weigh heavily on the success or failure of lean implementation. This paper focuses on giving a brief and structured overview over the fundamental organizational factors which play a substantial role for the lean manufacturing (LM) implementation process. The study below focuses on internal factors which are indispensable for a successful LM implementation within organizations. It is imperative that these internal factors are known, recognized and taken into consideration during the whole LM implementation process. Ignoring their influence on the process's implementation may lead to endangering the expected results or to making the process more difficult which could result in much higher human resource consumption.

  16. Implications of Lean Manufacturing for Human Resource Strategy.

    Science.gov (United States)

    Forrester, Rosalind

    1995-01-01

    Lean production changes organizational style and structure, roles of team leaders and members, training needs, problem-solving approaches, labor relations, and pay practices. The profound cultural changes it causes may trigger defenses that cause it to fail. (SK)

  17. Establishing a Lean Six Sigma Program in Higher Education

    KAUST Repository

    Svensson, Carsten; Baessa, Mohamed A.; Bakhsh, Majed M.

    2013-01-01

    Purpose: The objective of this paper is a contribution to the body of Lean Six Sigma knowledge within the vertical of higher education institutions. The paper will review the initial phase of an implementation and highlight future challenges. Approach: The observations presented in this paper, originates from rolling out a large lean six sigma implementation at a newly established university. The paper is supported with secondary data from literature. Findings: The paper will discuss the challenges of applying the lean six sigma method in a complex transactional environment. Research limitations: This paper is based on an empirical study of a single instance and authors’ experiences as practitioners. Originality: This paper is the first description of what is believed to be one of the largest implementations of Lean Six Sigma in higher education.

  18. Lean Manufacturing, Mass Customization and their relationships - empirical findings

    DEFF Research Database (Denmark)

    Christiansen, Thomas Bøhm

    2004-01-01

    manufacturing companies in 2001-02. This study fills a void in existing research by exploring relationships between bundles of lean manufacturing practices and bundles of mass customization practices. This study is based on a questionnaire that is developed from two existing questionnaires each investigating...... bundles of lean manufacturing practices and bundles of mass customization practices separately. Here, these bundles of practices are related. The results indicate that there are no direct relationships between the lean manufacturing and the mass customization practices, but that the combination of some...... sets of practices can explain differences in performance on important dimensions. The general conclusion, however, is that there are only weak relationships between the two concepts, hence this study suggests that the concepts of lean manufacturing and mass customization at present are more mutually...

  19. Thermal Radiation Properties of Turbulent Lean Premixed Methane Air Flames

    National Research Council Canada - National Science Library

    Ji, Jun; Sivathanu, Y. R; Gore, J. P

    2000-01-01

    ... of turbulent premixed flames. Reduced cooling airflows in lean premixed combustors, miniaturization of combustors, and the possible use of radiation sensors in combustion control schemes are some of the practical reasons...

  20. Lean six sigma case studies in the healthcare enterprise

    CERN Document Server

    Furterer, Sandra L

    2014-01-01

    This book provides a detailed description of how to apply Lean Six Sigma in the health care industry, with a special emphasis on process improvement and operations management in hospitals.  The book begins with a description of the Enterprise Performance Excellence (EPE) improvement methodology developed by the author that links several methodologies including systems thinking, theory of constraints, Lean and Six Sigma to provide an enterprise-wide prioritization and value-chain view of health care. The EPE methodology helps to improve flow at the macro or value-chain level, and then identifies Lean Six Sigma detailed improvements that can further improve processes within the value-chain.  The book also provides real-world health care applications of the EPE and Lean Six Sigma methodologies that showed significant results on throughput, capacity, operational and financial performance. The Enterprise Performance Excellence methodology is described, and also the Six Sigma DMAIC (Define-Measure-Analyze-Improve...

  1. Quality and Competitiveness: A Lean Six Sigma Approach

    Directory of Open Access Journals (Sweden)

    Irina-Virginia Drăgulănescu

    2015-11-01

    Full Text Available Originally developed to improve the quality and production efficiency, Lean Six Sigma is now widely adopted in other non-manufacturing sectors such as financial, trade, services, etc. The methodology known as Lean Six Sigma combines the Six Sigma techniques, ‒ which allow companies to reduce manufacturing defects ‒ and the Lean Manufacturing principles, ‒ which help companies benefit from faster processing for lower costs and with superior quality. As a result of the research, the authors observed that, despite growing popularity and impressive outcomes obtained by some companies, the Lean Six Sigma model does not always offer the expected results. However, the research has shown that the analysed company, operating in the field of courier services has managed to boost productivity and competitiveness by implementing measures that generated added value.

  2. LEAN BODY MASS AS A PREDICTOR OF PERFORMANCE OF ...

    African Journals Online (AJOL)

    siahkohian

    literature indicates considerable variations in the LBM of different athletes, with values ranging from a ... Olympic weightlifters are related to and predictive of indirect estimates of absolute and ... Lean body mass & weightlifter performance. 181.

  3. Establishing a Lean Six Sigma Program in Higher Education

    KAUST Repository

    Svensson, Carsten

    2013-09-12

    Purpose: The objective of this paper is a contribution to the body of Lean Six Sigma knowledge within the vertical of higher education institutions. The paper will review the initial phase of an implementation and highlight future challenges. Approach: The observations presented in this paper, originates from rolling out a large lean six sigma implementation at a newly established university. The paper is supported with secondary data from literature. Findings: The paper will discuss the challenges of applying the lean six sigma method in a complex transactional environment. Research limitations: This paper is based on an empirical study of a single instance and authors’ experiences as practitioners. Originality: This paper is the first description of what is believed to be one of the largest implementations of Lean Six Sigma in higher education.

  4. Is There a Lean Future for Global Startups?

    Directory of Open Access Journals (Sweden)

    Stoyan Tanev

    2017-05-01

    Full Text Available This article integrates insights from the latest research on the lean startup entrepreneurial method, born-global firms, and global startups. It contributes to the clarification of terminology referring to the global aspects of startups, summarizes insights from previous literature focusing on global startups, and further substantiates the articulation of the need for considering the lean global startup as a new type of firm. The main message is that the lessons learned from the emergence of lean startup entrepreneurship offer a basis for promoting a similar lean phase in technology-based global startup research and practice. The analysis should benefit both researchers and practitioners in technology entrepreneurship, international entrepreneurship, and global innovation management.

  5. Multi-Element Lean Direct Injection Combustor Module, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to develop a Multi-Element Lean Direct Injection, ME-LDI, Combustion concept with the following innovative features: 1. Independent, mini burning zones...

  6. LEAN LABORATORY APPROACHES FOR QUALITY ASSURANCE IN FOOD

    Directory of Open Access Journals (Sweden)

    Laxmana Naik

    2011-09-01

    Full Text Available A lean laboratory is one which is focused on testing products and materials to deliver results in the most efficient way in terms of cost or speed or both; primarily focused on improving measurable performance and reducing costs. The goal of a lean laboratory is to use less effort, less resources and less time to test incoming samples. Laboratories have a critical role to play in establishing and improving process capability and key performance indicator (KPI of the organization. There are inevitably many opinions as to what a lean lab actually is; here is one version fr om. Quality assurance laboratories are crucial to the success of organization and this effectiveness needs to be measurable and demonstrable. To facilitate this, a method of measuring a laboratory's progress towards complete deployment has been created by lean tools. These tools allow laboratories to conduct gap analysis and identify opportunities for improvement.

  7. Comparison of problem solving tools in lean organizations

    Directory of Open Access Journals (Sweden)

    Iuga Maria Virginia

    2017-01-01

    Full Text Available As global market competition is getting fiercer, and companies are looking at ways to stay on top, more and more organizations are looking at Lean Manufacturing and lean tools to support them in achieving their goals. Especially within the automotive industry, lean practices are very well received. The speed at which the automotive industry is evolving, especially but not only, in countries like Romania, leads to the need to carefully analyze lean manufacturing concepts, examine them against local production conditions, and to develop and standardize them. One of the most important things to take into consideration here is the application of an adequate problem solving technique to avoid waste. The objective of this research paper lies in analyzing and comparing the problem-solving methods recommended by the Toyota Production System, and to propose their appropriate application at shop floor, in relation to the specific problem type.

  8. Effects of sheep production systems on oxidative storage stability of lean lamb patties.

    Science.gov (United States)

    Rhee, Ki Soon; Lupton, C J; Ziprin, Y A; Rhee, K C

    2003-10-01

    Rambouillet lambs were assigned to three production systems varying in physical environment and diet: RF (a new, raised-floor feeding structure, with animals fed a pelleted mixture of 85% oat hay, 7.5% barley and 7.5% molasses); FL (a feedlot, with animals fed high-concentrate rations); and P (a pasture, with animals given access to the pasture and a high-concentrate supplement). Lengths of time on feed were adjusted to produce similar final shorn weights for each system. Ground meat patties were made with knife-separable lean from hind legs and aerobically refrigerated. Fat content of patties was not significantly different between RF and FL or P, while total unsaturated fatty acid percentage was slightly lower (P<0.05) for RF treatment. Patty color (redness) was most stable for RF. Lipid oxidation in raw patties also was lower (P<0.05) for RF than FL, but oxidation in cooked patties was greater for RF.

  9. Simulation of operational processes in hospital emergency units as lean healthcare tool

    OpenAIRE

    Gomes, Andreia Macedo; Vieira, Pedro Senna; Reis, Augusto da Cunha

    2017-01-01

    Recently, the Lean philosophy is gaining importance due to a competitive environment, which increases the need to reduce costs. Lean practices and tools have been applied to manufacturing, services, supply chain, startups and, the next frontier is healthcare. Most lean techniques can be easily adapted to health organizations. Therefore, this paper intends to summarize Lean practices and tools that are already being applied in health organizations. Among the numerous techniques and lean tools ...

  10. The roles of communication process for an effective lean manufacturing implementation

    OpenAIRE

    Puvanasvaran, Perumal; Megat, Hamdan; Hong, Tang Sai; Razali, Muhamad Mohd.

    2009-01-01

    Many companies are implementing lean manufacturing concept in order to remain competitive and sustainable, however, not many of them are successful in the process due to various reasons. Communication is an important aspect of lean process in order to successfully implement lean manufacturing. This paper determines the roles of communication process in ensuring a successful implementation of leanness in manufacturing companies. All the information of lean manufacturing practice...

  11. Lean Manufacturing Improves Emergency Department Throughput and Patient Satisfaction.

    Science.gov (United States)

    Kane, Marlena; Chui, Kristen; Rimicci, Janet; Callagy, Patrice; Hereford, James; Shen, Sam; Norris, Robert; Pickham, David

    2015-09-01

    A multidisciplinary team led by nursing leadership and physicians developed a plan to meet increasing demand and improve the patient experience in the ED without expanding the department's current resources. The approach included Lean tools and engaged frontline staff and physicians. Applying Lean management principles resulted in quicker service, improved patient satisfaction, increased capacity, and reduced resource utilization. Incorporating continuous daily management is necessary for sustainment of continuous improvement activities.

  12. Lean healthcare in developing countries: evidence from Brazilian hospitals.

    Science.gov (United States)

    Costa, Luana Bonome Message; Filho, Moacir Godinho; Rentes, Antonio Freitas; Bertani, Thiago Moreno; Mardegan, Ronaldo

    2017-01-01

    The present study evaluates how five sectors of two Brazilian hospitals have implemented lean healthcare concepts in their operations. The main characteristics of the implementation process are analyzed in the present study: the motivational factor for implementation, implementation time, form (consultancy or internal), team (hospital and consultants), lean implementation continuity/sustainability, lean healthcare tools and methods implemented, problems/improvement opportunities, lean healthcare barriers faced during the implementation process, and critical factors that affected the implementation and the results obtained in each case. The case studies indicate that reducing patient lead times and costs and making financial improvements were the primary factors that motivated lean healthcare implementation in the hospitals studied. Several tools and methods were used in the cases studied, especially value stream mapping and DMAIC. The barriers found in both hospitals are primarily associated with the human factor. Additionally, the results obtained after implementation were analyzed and improvements in financial aspects, productivity and capacity, and lead time reduction of the analyzed sectors were observed. Further, this study also exhibited four propositions elaborated from the results obtained from the cases that highlighted barriers and challenges to lean healthcare implementation in developing countries. Two of these barriers are hospital organizational structure (and, consequently, how the senior management works with medical staff), and outsourcing hospital activities. This study also concluded that the initialization and maintenance of lean healthcare implementation rely heavily on external support because lean healthcare subject knowledge is not yet available in the healthcare organization, which represents a challenge. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

  13. Aplikace lean managementu ve vybrané firmě

    OpenAIRE

    Zeman, Tomáš

    2014-01-01

    Abstract: The bachelor thesis is about approaches of lean management in operational ma-nagement. This way of thinking is based on Japanese methods of lean management and continuous improvement kaizen. These methods aim to eliminate all types of wasteing, shorten lead time and increase quality of output. The bachelor thesis is divided into two parts. In the theoretical part will be described theoretical knowledge and practical part, which will include direct practical solutions to problems in ...

  14. Study and application on lean resin converting in uranium mill

    International Nuclear Information System (INIS)

    Zhao Shaoxi; Huang Qijin; Zhu Shuguang; Yi Faqing; Du Wenjie

    2012-01-01

    The field test about sulphuric acid used to convert lean resin was finished. The results indicated sulphuric acid could replace chlorin in lean resin and could be reclaimed to desorption procedure. The consumption of NaCl decreased, the chlorin concentration of tailing decreased too. Both of uranium loss and waste water volume were reduced. The uranium concentration of tailing decreased and energy saving and emission reduction can be achieved. (authors)

  15. Lean på sygehuset - del I: Introduktion

    DEFF Research Database (Denmark)

    Laursen, Martin Lindgaard; Gertsen, Frank

    2009-01-01

    Dette workpaper introducerer et forskningsprojekt baseret på case studier af Lean principper anvendt på et sygehus. Operationelle udfordringer i sygehusets arbejdsgange illustreres gennem et observeret patientforløb. Disse udfordringer, et oprids af sygehusenes vilkår, og gennemgang af tidligere...... tiltag omkring forbedringer på sygehusene leder frem til projektets problemstilling og tilgang i form af afprøvning af Lean principper....

  16. Is lean service promising? A socio-technical perspective

    OpenAIRE

    Hadid, W; Mansouri, SA; Gallear, D

    2016-01-01

    Purpose – This research paper contributes to the ongoing debate about the effectiveness of lean practices in the service sector. Design/methodology/approach – This paper combines objective and subjective empirical data from a relatively large number of UK, medium and large, for-profit service firms and examines six hypotheses relating to the impact of lean service on firm operational and financial performance. Exploratory factor analysis is used to reduce the data and identify the underlyi...

  17. Improving road transport operations through lean thinking: A case study

    OpenAIRE

    Villarreal, B.; Garza-Reyes, J. A.; Kumar, V.; Lim, M. K.

    2017-01-01

    Traditionally, logistics and transportation problems have been addressed through mathematical modelling, operations research, and simulation methods. This paper documents a case study where the road transport operations of a leading Mexican brewery organisation have been improved through lean thinking and waste reduction. Two lean-based principles and tools were combined; the Seven Transportation Extended Wastes (STEWs) and Transportation Value Stream Mapping (TVSM), and three systematic step...

  18. The integration of lean, green and best practice business principles

    OpenAIRE

    Annelize Wiese; Rose Luke; Gert J. Heyns; Noleen M. Pisa

    2015-01-01

    Background: Whilst there are separate streams of established research on lean, green and best practice initiatives, the intersection of these three strategic principles has not been addressed extensively in the past. Objectives: In this study a framework to integrate lean, green and best practice principles into an integrated business model was developed as a strategy for businesses to develop sustainable competitive advantages. Method: A descriptive case study was conducted on Toyota...

  19. Implementation of lean thinking: one health system's journey.

    Science.gov (United States)

    Kim, Christopher S; Spahlinger, David A; Kin, Jeanne M; Coffey, Richard J; Billi, John E

    2009-08-01

    Lean Thinking is a management philosophy derived from the manufacturing industry, where Toyota has long been the gold standard. Health care organizations have started to apply this approach to patient care. After initial experimentation, the University of Michigan Health System (UMHS) has adopted Lean Thinking as its uniform approach to quality improvement and is striving to become a complete Lean organization. In 2005, the senior leadership selected an initial set of projects in areas that traced the patient's journey across different care settings within our health system. Four of the projects were as follows: orthopedic surgery clinic scheduling, radiation oncology therapy, peripherally inserted central catheter (PICC) services, and coordination of care to the outpatient setting. Lean Thinking encourages service providers to focus on value as defined by the customer and the relentless elimination of waste that impedes the flow of value. A series of learning projects were conducted to test whether Lean methods would work at UMHS. The following factors were found to be key to LEAN PROJECT SUCCESS: expert guidance for initial efforts, leadership in the form of clinical champions and senior management support of the improvement work, frontline worker engagement in mapping out "current state" processes, identifying waste and designing an improved "future state," using metrics to develop and track interventions, and defining realistic project scope. As UMHS's experience applying Lean Thinking to our patient care processes has grown, so have support, enthusiasm, and expertise within the organization. UMHS's Lean Thinking system, now known as the Michigan Quality System, has emerged as the core improvement strategy.

  20. Methods of measuring the effectiveness of Lean Management

    Directory of Open Access Journals (Sweden)

    Marcel Lizak

    2016-12-01

    Full Text Available Invalid organisation of the production environment in an enterprise is the cause of many disruptions during the implementation of production processes. Lean Management is aimed at improving processes and eliminating interference in accordance with the Kaizen principle. A significant element of management constantly analyses and measures the improved results. The article presents the results of the literature research from the scope of observation methods and measuring the effects of the use of Lean Management instruments in manufacturing companies.

  1. Private landowners and environmental conservation: a case study of social-psychological determinants of conservation program participation in Ontario

    Directory of Open Access Journals (Sweden)

    Michael Drescher

    2017-03-01

    Full Text Available Preservation of biodiversity and continued provision of ecosystem services increasingly relies on environmental conservation on private lands. Despite a multitude of past studies, our knowledge of the motives, opportunities, and challenges of private land conservation, especially on nonworking lands, where financial incentives are less relevant, remains incomplete. A key reason is that a variety of theoretical approaches, resulting in diverging study results, have been used to investigate private land conservation. To help remedy this problem, the current study rigorously examined several established social-psychological determinants of proenvironmental behaviors and developed a comprehensive model, which merged elements from previous studies, to investigate landowner participation in a government-sponsored private land conservation program for nonworking lands. The results are based on analysis of a mailed survey of 800 program-eligible landowners. Contrasting program participants with nonparticipants, we elicited information such as about values, worldviews, socio-demographic characteristics, and property attributes that led landowners to participate in this conservation program. The results of our study illustrate the complex relationships among values, worldviews, norms, attitudes, and behaviors emphasizing the importance of proenvironmental worldviews and of formal education for increasing the likelihood of enrollment in this government-sponsored private land conservation program. Against expectation, neither personal norms, household income, political leaning, nor the size of the eligible property area were found to be important in directly determining the decision to enroll in this conservation program. However, an association of political leaning with stated personal obligation for private land conservation was found. Our results highlight the relationship between formal education and achievement of private land conservation goals

  2. LEAN ARCHIVES: O emprego do Lean Office na gestão de arquivos

    Directory of Open Access Journals (Sweden)

    Marcelo Cavaglieri

    2017-01-01

    Full Text Available Resumo Neste estudo, buscou-se aplicar o Lean office na gestão de arquivos tendo como objetivo verificar a aplicabilidade do pensamento Lean na arquivística. Quanto ao método utilizado, caracteriza-se por ser uma pesquisa-ação, de abordagem quali-quantitativa, classificada como exploratória e descritiva. A coleta dos dados realizou-se por meio de observação participante, entrevista não estruturada e realização de um grupo focal. Em relação à aplicação da pesquisa, seguiram-se os seguintes passos: Treinamento e conscientização dos colaboradores para o pensamento Lean; MFV - estado atual; MFV - estado Futuro; Plano de ação e Avaliação e discussão dos resultados. Entre os resultados obtidos da pesquisa realizada, destaca-se, de forma quantitativa, a redução de desperdícios com ganhos significativos do Lead Time, diminuindo o tempo gasto para processar as atividades e tempo em que o material fica parado, esperando para ser processado. Ganhos financeiros também foram obtidos, com mais aproveitamento dos recursos e uma reformulação na forma de guardar os documentos. De forma qualitativa, destaca-se um melhor ambiente de trabalho com práticas da gestão visual para comunicação das informações e aumento da eficiência do serviço prestado, gerando mais satisfação do cliente.

  3. Sodium in diet

    Science.gov (United States)

    Diet - sodium (salt); Hyponatremia - sodium in diet; Hypernatremia - sodium in diet; Heart failure - sodium in diet ... Too much sodium in the diet may lead to: High blood pressure in some people A serious buildup of fluid in people with heart failure , cirrhosis of ...

  4. PRIORITISING LEAN CONSTRUCTION BARRIERS IN UGANDA'S CONSTRUCTION INDUSTRY

    Directory of Open Access Journals (Sweden)

    Henry Mwanaki Alinaitwe

    2009-06-01

    Full Text Available Engaging in lean construction efforts could prove to be highly rewarding for building firms in Uganda. However, lean construction is risky and can be disastrous if not properly managed. Lean production efforts in some other countries have not been successful due to the many barriers to its successful implementation. To enable sound lean construction efforts and to increase the chances of success in eliminating waste, a thorough investigation of the barriers is essential. This study presents 31 barriers and investigates their influence (strength on the success of lean construction initiatives. Structured interviews were carried out with technical managers of building firms to assess their perception of the barriers to lean production based on their experience at their firms. The strongest barrier is the provision of inputs exactly when required. Additionally, the barriers were ranked according to the ease of overcoming each. The easiest barrier to overcome is keeping the required items in the right place. Finally, a graphical aid is provided to enable decision makers to concentrate their efforts on the influential (strong, yet easy to overcome barriers. A lack of buildable designs and a participative management style for the workforce are the most important barriers to successful waste reduction in terms of strength and ease of overcoming. On the other hand, a lack of an organisational culture that supports teamwork, a lack of prefabrication and a lack of knowledgeable and skilled workers are regarded as low in strength, and at the same time difficult to overcome.

  5. Lean management systems: creating a culture of continuous quality improvement.

    Science.gov (United States)

    Clark, David M; Silvester, Kate; Knowles, Simon

    2013-08-01

    This is the first in a series of articles describing the application of Lean management systems to Laboratory Medicine. Lean is the term used to describe a principle-based continuous quality improvement (CQI) management system based on the Toyota production system (TPS) that has been evolving for over 70 years. Its origins go back much further and are heavily influenced by the work of W Edwards Deming and the scientific method that forms the basis of most quality management systems. Lean has two fundamental elements--a systematic approach to process improvement by removing waste in order to maximise value for the end-user of the service and a commitment to respect, challenge and develop the people who work within the service to create a culture of continuous improvement. Lean principles have been applied to a growing number of Healthcare systems throughout the world to improve the quality and cost-effectiveness of services for patients and a number of laboratories from all the pathology disciplines have used Lean to shorten turnaround times, improve quality (reduce errors) and improve productivity. Increasingly, models used to plan and implement large scale change in healthcare systems, including the National Health Service (NHS) change model, have evidence-based improvement methodologies (such as Lean CQI) as a core component. Consequently, a working knowledge of improvement methodology will be a core skill for Pathologists involved in leadership and management.

  6. Illusion or delusion--Lean management in the health sector.

    Science.gov (United States)

    McIntosh, Bryan; Sheppy, Bruce; Cohen, Ivan

    2014-01-01

    There has been considerable interest in the implementation of practices imported from manufacturing into healthcare as a solution to rising healthcare spending and disappointing patient safety indicators. One approach that has attracted particular interest is Lean management and the purpose of this paper is to engage with this topic. Secondary research. Despite widespread enthusiasm about the potential of Lean management processes, evidence about its contribution to higher organisational performance remains inconsistent. This paper engages with the major Lean concepts of operations management and human resource management, including just-in-time, total quality management, total productive maintenance and does not engage in-depth with concepts related to employee empowerment, and training This paper contributes to the organisational management literature in healthcare by showing that although Lean management seems to have the potential to improve organisational performance it is far from a panacea against under performing hospitals. It informs policy making by suggesting that a progressive managerial philosophy has a stronger impact on healthcare performance than the adoption of practices from any particular managerial approach. This paper provides a critical evaluation of the impact of Lean practices in informing healthcare policy. The paper contributes to the organisational management literature in healthcare by showing that even though Lean management in healthcare appears to have the potential to improve organisational performance; there remain problems with its application.

  7. Lean accounting – as a future accounting system

    Directory of Open Access Journals (Sweden)

    M.V. Koryagin

    2017-12-01

    Full Text Available The historical development of lean accounting is researched. The comparison of lean accounting and accounting is carried out. The article determines the lean accounting basic principles, which are the basis for the selection of main ten steps of upgrading to the system of lean accounting: the evaluation of the current situation and the expected development prospects of the enterprise; the development of the principles of implementing lean accounting; the determining the production parameters and methodology of the economic model construction; the organization of lean manufacturing environment and reducing most of the stock; the determining the flow of value creation; the rejection of variable accounting and reverse cancellation of all labor costs and the cost of materials; the rejection of tracking stocks and assign of the costs directly to the costs of sales when occurred; the definition of client-targeted spending; the relationship with suppliers and automation of the accounts payable; the relationship with customers and automation of the payments received.

  8. Instill Lean A3 Thinking into Healthcare IT Services

    Directory of Open Access Journals (Sweden)

    Jihong Zeng

    2014-08-01

    Full Text Available Healthcare information technology is a key enabler for care transformation to provide quality care at low cost and better population health.  Many healthcare organizations have established IT Program Management and adopted ITIL best practice to manage IT services. However, ITIL and traditional project management are heavily process oriented, and neither flexible nor effective enough for swift response to changing business demand. Lean methodologies are increasingly deployed by healthcare providers to improve workflow process management but only has limited use cases documented in healthcare IT service. This paper introduces the Lean A3 Thinking methodology and its value in identifying and eliminating wastes to provide agile and effective solutions in response to customer requests. We present a case study of applying Lean A3 Thinking to improve clinical informatics reporting service. The initial evaluation results are promising and indicate that both ITIL and Lean A3 Thinking focus on customer and service quality, complementing each other well. ITIL provides a framework for ITSM based on a set of best practice to manage IT services. Lean A3 Thinking specifies a set of framework and tools for improving quality of services and processes by eliminating wastes. Proper balance between Lean and ITIL principles for ITSM needs more research and further study.

  9. PENERAPAN LEAN MANUFACTURING UNTUK MEREDUKSI WASTE DI INDUSTRI SKALA UKM

    Directory of Open Access Journals (Sweden)

    Darminto Pujotomo

    2012-08-01

    Full Text Available Lean Manufacturing merupakan konsep manufaktur untuk menghasilkan produk yang efisien dengan mengurangi biaya produksi melalui efisiensi. Dalam konsep Lean, dikenal 7 macam pemborosan yang meliputi produksi berlebih, transportasi material yang berlebihan, menunggu, proses yang tidak perlu, persediaan, pergerakan dan cacat produk. Penelitian ini menggunakan value stream mapping dalam mengidentifikasi pemborosan dan menelusuri potensi terjadinya pemborosan. Potensi pemborosan yang terjadi akan direduksi dengan menggunakan instrumen yang sesuai berdasarkan indikator terpilih. Penelitian diharapkan dapat menghasilkan proses produksi yang lebih efisiensi sehingga mampu mereduksi biaya produksi. Pada akhirnya akan menghasilkan profit yang lebih besar. Kata kunci : lean manufacturing, value stream mapping, waste   Lean Manufacturing is a manufacturing concepts to produce products that are efficient by reducing production costs through efficiencies. In the Lean concept, known seven kinds of waste, including overproduction, excessive material transportation, waiting, unnecessary processes, inventory, motion and product defects. This study uses value stream mapping to identify waste and exploring the potential for waste. Potential waste that occurs will be reduced by using appropriate instruments based on selected indicators. The study is expected to produce a more efficient production processes so as to reduce production costs.Will ultimately result in greater profits. Keywords: lean manufacturing, value stream mapping, waste

  10. Improving Autopsy Report Turnaround Times by Implementing Lean Management Principles.

    Science.gov (United States)

    Cromwell, Susan; Chiasson, David A; Cassidy, Debra; Somers, Gino R

    2018-01-01

    The autopsy is an integral part of the service of a large academic pathology department. Timely reporting is central to providing good service and is beneficial for many stakeholders, including the families, the clinical team, the hospital, and the wider community. The current study aimed to improve hospital-consented autopsy reporting times (turnaround time, TAT) by using lean principles modified for a healthcare setting, with an aim of signing out 90% of autopsies in 90 days. An audit of current and historical TATs was performed, and a working group incorporating administrative, technical, and professional staff constructed a value stream map documenting the steps involved in constructing an autopsy report. Two areas of delay were noted: examination of the microscopy and time taken to sign-out the report after the weekly autopsy conference. Several measures were implemented to address these delays, including visual tracking using a whiteboard and individualized tracking sheets, weekly whiteboard huddles, and timelier scheduling of clinicopathologic conference rounds. All measures resulted in an improvement of TATs. In the 30 months prior to the institution of lean, 37% of autopsies (53/144) were signed out in 90 days, with a wide variation in reporting times. In the 30 months following the institution of lean, this improved to 74% (136/185) ( P lean; 63 days post-lean). The application of lean principles to autopsy sign-out workflow can significantly improve TATs and reduce variability, without changing staffing levels or significantly altering scheduling structure.

  11. Value Stream Mapping to Improve Workplace to support Lean Environment

    Directory of Open Access Journals (Sweden)

    Ahmad Ahmad Nur Aizat

    2017-01-01

    Full Text Available In recent years, lean manufacturing is being followed by various sectors in order to keep their competitiveness in the global markets. Lean manufacturing plays a vital role in improving the efficiency of operation by eliminating or reducing wastes. Nonetheless, most of small and medium enterprises (SMEs lack sufficient knowledge or information on the benefits of implementing lean manufacturing. The main objective of this study is to apply value stream mapping, one of lean manufacturing tools, for improving the productivity in a SME by eliminating non-value added activities. In this study, lean manufacturing was adopted at a SME, particularly a food industry. Value stream mapping was served as main tool to identify the wastes and improvement opportunities in production line. Subsequently, different lean manufacturing tools such as Kaizen Burst, one piece flow, and 5S were applied to eliminate or reduce identified wastes. Based on the future state value stream mapping, final results showed that the total operation time and non-added value activities time were successfully decreased from 1993 seconds to 1719 seconds, and 234 seconds to 104 seconds, respectively. The findings of this study indicate that value stream mapping is an effective approach to eliminate the wastes and improve the productivity.

  12. Lean sigma--will it work for healthcare?

    Science.gov (United States)

    Bahensky, James A; Roe, Janet; Bolton, Romy

    2005-01-01

    The manufacturing industry has been using Lean Sigma for years in pursuit of continuous improvement to obtain a competitive advantage. The objectives of these efforts are to use the Lean techniques for reducing cycle times and the Six Sigma concepts for reducing product defects. The Iowa Business Council with several advocates worked with the University of Iowa Hospital and Clinics (UIHC) and two other Iowa hospitals to determine whether Lean Sigma is adaptable in healthcare. A team of 15 people at UIHC used the Kaizen Breakthrough Methodology over a five-day period in an aggressive identification and elimination of non-value added activities in Radiology CT scanning. The results exceeded the initial project objectives and indicated that Lean Sigma is applicable in healthcare. Overall, the Lean Sigma project increased revenue by approximately $750,000 per year. The Kaizen process proved to be successful and interesting. Within three days, the team installed new work flow processes. This implementation-oriented approach is what differentiates Lean Sigma from other quality improvement processes.

  13. Interrelation of Lean and Green Management in Croatian Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Miro Hegedić

    2018-03-01

    Full Text Available The goal of this article is to explore the link between lean and green management, reasons for their implementation, their effect throughout the whole life cycle, as well as the current state of use of lean tools, economic and environmental indicators in the context of Croatian manufacturing companies. A semi-structured interview was used in this research. As a result, the frequency of economic and environmental performance indicators and lean tools in Croatian companies has been defined, as well as the reasons for the implementation of lean management. Additionally, the understanding of the use of Life Cycle Assessment methods, environmental standards has been obtained and the integration of lean and green management in Croatian companies has been explored. Further on, results were compared to the similar study done in the UK. Finally, it can be concluded that the integration of lean and green management is not yet sufficiently present in manufacturing companies, although there are cases in which these two approaches are integrated, primarily in the process and food industry. It is for these reasons that in the integration of these two approaches lies great potential.

  14. Improving the medical records department processes by lean management.

    Science.gov (United States)

    Ajami, Sima; Ketabi, Saeedeh; Sadeghian, Akram; Saghaeinnejad-Isfahani, Sakine

    2015-01-01

    Lean management is a process improvement technique to identify waste actions and processes to eliminate them. The benefits of Lean for healthcare organizations are that first, the quality of the outcomes in terms of mistakes and errors improves. The second is that the amount of time taken through the whole process significantly improves. The purpose of this paper is to improve the Medical Records Department (MRD) processes at Ayatolah-Kashani Hospital in Isfahan, Iran by utilizing Lean management. This research was applied and an interventional study. The data have been collected by brainstorming, observation, interview, and workflow review. The study population included MRD staff and other expert staff within the hospital who were stakeholders and users of the MRD. The MRD were initially taught the concepts of Lean management and then formed into the MRD Lean team. The team then identified and reviewed the current processes subsequently; they identified wastes and values, and proposed solutions. The findings showed that the MRD units (Archive, Coding, Statistics, and Admission) had 17 current processes, 28 wastes, and 11 values were identified. In addition, they offered 27 comments for eliminating the wastes. The MRD is the critical department for the hospital information system and, therefore, the continuous improvement of its services and processes, through scientific methods such as Lean management, are essential. The study represents one of the few attempts trying to eliminate wastes in the MRD.

  15. Psychological correlates of habitual diet in healthy adults.

    Science.gov (United States)

    Stevenson, Richard J

    2017-01-01

    There are 3 motivations for studying the psychological correlates of habitual diet. First, diet is a major but modifiable cause of morbidity and mortality, and dietary interventions could be improved by knowing the psychological characteristics of consumers of healthy/unhealthy diets. Second, animal studies indicate that diet can impair cognition, stress responsiveness, and affective processing, but it is unclear whether this also happens in humans. Third, certain psychological traits are associated with obesity, but it is not known whether these precede and thus contribute to weight gain. Although many psychological correlates of diet have been identified, the literature is highly dispersed, and there has been no previous comprehensive narrative review. Organized here by psychological domain, studies linking diet with individual differences in perception, cognition, impulsivity, personality, affective processing, mental health, and attitudes, beliefs and values-in healthy adults-are reviewed. Although there is a growing literature on the psychological correlates of fruit/vegetable intake-the core of a healthy diet-consumers of unhealthy diets have characteristics that probably make them less responsive to education-based interventions. Diet may be a causal contributor to depression, and diet is consistently linked to impulsivity and certain personality traits. There are inconsistent and less explored links to perceptual, affective and cognitive processes, with several emerging parallels to the animal literature. Impulsivity and personality traits common to obese individuals also occur in lean consumers of unhealthy diets, suggesting these may contribute to weight gain. Diet-psychology correlates remain understudied even though this could significantly benefit human health. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  16. Evidence for greater production of colonic short-chain fatty acids in overweight than lean humans.

    Science.gov (United States)

    Rahat-Rozenbloom, S; Fernandes, J; Gloor, G B; Wolever, T M S

    2014-12-01

    Short-chain fatty acids (SCFA) are produced by colonic microbiota from dietary carbohydrates and proteins that reach the colon. It has been suggested that SCFA may promote obesity via increased colonic energy availability. Recent studies suggest obese humans have higher faecal SCFA than lean, but it is unclear whether this difference is due to increased SCFA production or reduced absorption. To compare rectal SCFA absorption, dietary intake and faecal microbial profile in lean (LN) versus overweight and obese (OWO) individuals. Eleven LN and eleven OWO individuals completed a 3-day diet record, provided a fresh faecal sample and had SCFA absorption measured using the rectal dialysis bag method. The procedures were repeated after 2 weeks. Age-adjusted faecal SCFA concentration was significantly higher in OWO than LN individuals (81.3±7.4 vs 64.1±10.4 mmol kg(-1), P=0.023). SCFA absorption (24.4±0.8% vs 24.7±1.2%, respectively, P=0.787) and dietary intakes were similar between the groups, except for a higher fat intake in OWO individuals. However, fat intake did not correlate with SCFAs or bacterial abundance. OWO individuals had higher relative Firmicutes abundance (83.1±4.1 vs 69.5±5.8%, respectively, P=0.008) and a higher Firmicutes:Bacteriodetes ratio (P=0.023) than LN individuals. There was a positive correlation between Firmicutes and faecal SCFA within the whole group (r=0.507, P=0.044), with a stronger correlation after adjusting for available carbohydrate (r=0.615, P=0.005). The higher faecal SCFA in OWO individuals is not because of differences in SCFA absorption or diet. Our results are consistent with the hypothesis that OWO individuals produce more colonic SCFA than LN individuals because of differences in colonic microbiota. However, further studies are needed to prove this.

  17. Lean Development with the Morpheus Simulation Software

    Science.gov (United States)

    Brogley, Aaron C.

    2013-01-01

    The Morpheus project is an autonomous robotic testbed currently in development at NASA's Johnson Space Center (JSC) with support from other centers. Its primary objectives are to test new 'green' fuel propulsion systems and to demonstrate the capability of the Autonomous Lander Hazard Avoidance Technology (ALHAT) sensor, provided by the Jet Propulsion Laboratory (JPL) on a lunar landing trajectory. If successful, these technologies and lessons learned from the Morpheus testing cycle may be incorporated into a landing descent vehicle used on the moon, an asteroid, or Mars. In an effort to reduce development costs and cycle time, the project employs lean development engineering practices in its development of flight and simulation software. The Morpheus simulation makes use of existing software packages where possible to reduce the development time. The development and testing of flight software occurs primarily through the frequent test operation of the vehicle and incrementally increasing the scope of the test. With rapid development cycles, risk of loss of the vehicle and loss of the mission are possible, but efficient progress in development would not be possible without that risk.

  18. Lean management implementation in mining industries

    Directory of Open Access Journals (Sweden)

    ALTAIR FLAMARION KLIPPEL

    2008-01-01

    Full Text Available Entre las alternativas para asegurar su supervivencia, una particularmente pertinente para las Organizaciones es la innovación. La innovación tiene varias dimensiones entre que es posible incluir: i materia prima; ii producto; iii proceso; iv mercado; v la manera cómo es realizada la administración. Este artículo tiene el objetivo de mostrar la posibilidad de llevar a cabo una nueva manera de dirección en las industrias de extracción de mineral a través del uso integrado de los conceptos desarrollados en la construcción del Sistema de Producción Toyota (SPT / el Sistema de Producción Lean, y los conceptos y técnicas tradicionales que se originan de la Ingeniería Minera y la Ingeniería Industrial. El artículo muestra esta integración en dos situaciones de la minería (fluorita y amatista. Los resultados indican la reducción del costo de la producción y aumento de la productividad y la mejora de la Calidad de Vida de Trabajadores.

  19. PENGURANGAN WASTE MENGGUNAKAN PENDEKATAN LEAN MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Akhmad Jakfar

    2014-06-01

    Full Text Available PT. XYZ is one of some cigarette companies in Indonesia. In producing cigarette, the firm requires a material named “etiket” which is produced by printing division for internal consumers of PT. XYZ. In order to produce “etiket”, there are some wastes occurred. One of wastes occurred in printing division is product defects. This paper attempts to identify wastes in the division of printing using Lean Manufacturing approach by applying Value Stream Mapping (VSM method. The results from cause root analysis found that the problems caused the defects in production process. It shows that the most wastes occurs in the printing division are product defect and waiting time. The product defects are caused because there is no standard applied in processing the product and poor inspections by management, while the causes of waiting time wastes is because of lack of carrier and no standard in each process. The recommendation can be suggested to the company are adding some carrier (product’s transporter, creating process standard in each process.

  20. Lean energy analysis of CNC lathe

    Science.gov (United States)

    Liana, N. A.; Amsyar, N.; Hilmy, I.; Yusof, MD

    2018-01-01

    The industrial sector in Malaysia is one of the main sectors that have high percentage of energy demand compared to other sector and this problem may lead to the future power shortage and increasing the production cost of a company. Suitable initiatives should be implemented by the industrial sectors to solve the issues such as by improving the machining system. In the past, the majority of the energy consumption in industry focus on lighting, HVAC and office section usage. Future trend, manufacturing process is also considered to be included in the energy analysis. A study on Lean Energy Analysis in a machining process is presented. Improving the energy efficiency in a lathe machine by enhancing the cutting parameters of turning process is discussed. Energy consumption of a lathe machine was analyzed in order to identify the effect of cutting parameters towards energy consumption. It was found that the combination of parameters for third run (spindle speed: 1065 rpm, depth of cut: 1.5 mm, feed rate: 0.3 mm/rev) was the most preferred and ideal to be used during the turning machining process as it consumed less energy usage.

  1. Development of a lean duplex stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Liljas, M.; Johansson, P.; Liu Hui-Ping; Olsson, C.O.A. [Avesta Research Centre, Avesta (Sweden). Outokumpu Stainless

    2008-06-15

    The classic series of duplex stainless steels shows very high corrosion resistance and can be used for very demanding applications. A new lean duplex steel, LDX 2101 {sup registered} (EN 1.4162, UNS S32101), has been developed with corrosion resistance on a par with standard austenitic grades. Application areas include: structural components, chemical industry, tanks and containers. The steel was designed to have equal amounts of ferrite and austenite in annealed condition and with an austenite that is stable against strain-induced martensite. Thanks to its high nitrogen content, the steel has a fast austenite reformation when subjected to thermal cycling, e.g. welding. Unlike conventional duplex grades, the formation of intermetallic phase is very sluggish, although precipitation of nitrides and carbides has a certain impact on material properties after exposure in the temperature range 600 to 800 C. The precipitation behaviour after different isothermal treatments is described and its influence on different product properties is shown. A good agreement was found between impact toughness and corrosion resistance for a wide range of thermal treatments. (orig.)

  2. REDUCING WASTE DENGAN MENGGUNAKAN PENDEKATAN LEAN MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Akhmad Jakfar

    2015-04-01

    Full Text Available PT. XYZ is one of some cigarette companies in Indonesia. In producing cigarette, the firm requires a material named “etiket” which is produced by printing division for internal consumers of PT. XYZ. merupakan salah satu dari beberapa produsen rokok di Indonesia yang telah dikenal masyarakat. In order to produce “etiket”, there are some wastes occurred. One of wastes occurred in printing division is product defects. This paper attempts to identify wastes in the division of printing using Lean Manufacturing approach by applying Value Stream Mapping (VSM method. The results from Cause Root analysis found that the problems caused the defects in production process. It shows that the most wastes occurs in the printing division are product defect and waiting time. The product defects are caused because there is no standard applied in processing the product and poor inspections by management, while the causes of waiting time wastes is because of lack of carrier and no standard in each process. The recommendation can be suggested to the company are adding some carrier (product’s transporter, creating process standard in each process.

  3. Maturity and maturity models in lean construction

    Directory of Open Access Journals (Sweden)

    Claus Nesensohn

    2014-03-01

    Full Text Available In recent years there has been an increasing interest in maturity models in management-related disciplines; which reflects a growing recognition that becoming more mature and having a model to guide the route to maturity can help organisations in managing major transformational change. Lean Construction (LC is an increasingly important improvement approach that organisations seek to embed. This study explores how to apply the maturity models to LC. Hence the attitudes, opinions and experiences of key industry informants with high levels of knowledge of LC were investigated. To achieve this, a review of maturity models was conducted, and data for the analysis was collected through a sequential process involving three methods. First a group interview with seven key informants. Second a follow up discussion with the same individuals to investigate some of the issues raised in more depth. Third an online discussion held via LinkedIn in which members shared their views on some of the results. Overall, we found that there is a lack of common understanding as to what maturity means in LC, though there is general agreement that the concept of maturity is a suitable one to reflect the path of evolution for LC within organisations.

  4. Diabetes diet - gestational

    Science.gov (United States)

    ... peanut butter Healthy protein choices include: Fish and poultry. Remove the skin from chicken and turkey. Lean cuts of beef, veal, pork or wild game. Trim all visible fat from meat. Bake, roast, broil, grill, or boil instead of ...

  5. In vitro characterization of the impact of different substrates on metabolite production, energy extraction and composition of gut microbiota from lean and obese subjects.

    Science.gov (United States)

    Aguirre, Marisol; Jonkers, Daisy M A E; Troost, Freddy J; Roeselers, Guus; Venema, Koen

    2014-01-01

    The aim of this study was to investigate the effect of galacto-oligosaccharides, lactulose, apple fiber and sugar beet pectin on the composition and activity of human colonic microbiota of lean and obese healthy subjects using an in vitro model of the proximal colon: TIM-2. Substrate fermentation was assessed by measuring the production of short-chain and branched-chain fatty acids, lactate and ammonia and by studying the composition of the bacterial communities over time. The results suggest that energy harvest (in terms of metabolites) of lean and obese microbiotas is different and may depend on the fermentable substrate. For galacto-oligosaccharides and lactulose, the cumulative amount of short-chain fatty acids plus lactate produced in TIM-2 was lower in the fermentation experiments with the lean microbiota (123 and 155 mmol, respectively) compared to the obese (162 and 173 mmol, respectively). This was reversed for the pectin and the fiber. The absolute amount produced of short-chain fatty acids including lactate was higher after 72 h in the fermentation experiments with apple fiber-L (108 mmol) than with apple fiber-O (92 mmol). Sugar beet-L was also higher (130 mmol) compared to sugar beet-O (103 mmol). Galacto-oligosaccharides and lactulose boosted the balance of health-promoting over toxic metabolites produced by the microbiota from obese subjects. Firmicutes were more predominant in the inoculum prepared from feces of obese subjects compared to lean subjects. The average abundance at time zero was 92% and 74%, respectively. On the other hand, Bacteroidetes were more dominant in the microbiota prepared with homogenates from lean subjects with an average abundance of 22% compared with the microbiota prepared with homogenates from obese subjects (3.6%). This study brings evidence that different fermentable carbohydrates are fermented differently by lean and obese microbiotas, which contributes to the understanding of the role of diet and the microbiota in

  6. In vitro characterization of the impact of different substrates on metabolite production, energy extraction and composition of gut microbiota from lean and obese subjects.

    Directory of Open Access Journals (Sweden)

    Marisol Aguirre

    Full Text Available The aim of this study was to investigate the effect of galacto-oligosaccharides, lactulose, apple fiber and sugar beet pectin on the composition and activity of human colonic microbiota of lean and obese healthy subjects using an in vitro model of the proximal colon: TIM-2. Substrate fermentation was assessed by measuring the production of short-chain and branched-chain fatty acids, lactate and ammonia and by studying the composition of the bacterial communities over time. The results suggest that energy harvest (in terms of metabolites of lean and obese microbiotas is different and may depend on the fermentable substrate. For galacto-oligosaccharides and lactulose, the cumulative amount of short-chain fatty acids plus lactate produced in TIM-2 was lower in the fermentation experiments with the lean microbiota (123 and 155 mmol, respectively compared to the obese (162 and 173 mmol, respectively. This was reversed for the pectin and the fiber. The absolute amount produced of short-chain fatty acids including lactate was higher after 72 h in the fermentation experiments with apple fiber-L (108 mmol than with apple fiber-O (92 mmol. Sugar beet-L was also higher (130 mmol compared to sugar beet-O (103 mmol. Galacto-oligosaccharides and lactulose boosted the balance of health-promoting over toxic metabolites produced by the microbiota from obese subjects. Firmicutes were more predominant in the inoculum prepared from feces of obese subjects compared to lean subjects. The average abundance at time zero was 92% and 74%, respectively. On the other hand, Bacteroidetes were more dominant in the microbiota prepared with homogenates from lean subjects with an average abundance of 22% compared with the microbiota prepared with homogenates from obese subjects (3.6%. This study brings evidence that different fermentable carbohydrates are fermented differently by lean and obese microbiotas, which contributes to the understanding of the role of diet and the

  7. Industry 4.0 implies lean manufacturing: research activities in industry 4.0 function as enablers for lean manufacturing

    OpenAIRE

    Sanders, Adam; Elangeswaran, Chola; Wulfsberg, Jens

    2016-01-01

    Purpose: Lean Manufacturing is widely regarded as a potential methodology to improve productivity and decrease costs in manufacturing organisations. The success of lean manufacturing demands consistent and conscious efforts from the organisation, and has to overcome several hindrances. Industry 4.0 makes a factory smart by applying advanced information and communication systems and future-oriented technologies. This paper analyses the incompletely perceived link between Industr...

  8. Nutrition and Diet

    Science.gov (United States)

    ... Thai HbH:Vietnamese Relevant links Living with Thalassemia NUTRITION AND EXERCISE ▶ Nutrition and DietDiet for the ... Thalassemia (for providers) Exercise for Patients with Thalassemia Nutrition and Diet Nutritional deficiencies are common in thalassemia, ...

  9. Low Tyramine Headache Diet

    Science.gov (United States)

    ... Find A Provider Contact Membership Donate 25 Oct Low-Tyramine Diet for Migraine Posted at 17:16h ... and Diamond Headache Clinic Headache Diet Tags: headache , low tyramine diet , MAOI , tyramine No Comments Post A ...

  10. Low-salt diet

    Science.gov (United States)

    Low-sodium diet; Salt restriction ... control many functions. Too much sodium in your diet can be bad for you. For most people, ... you limit salt. Try to eat a balanced diet. Buy fresh vegetables and fruits whenever possible. They ...

  11. Iodine in diet

    Science.gov (United States)

    Diet - iodine ... Many months of iodine deficiency in a person's diet may cause goiter or hypothyroidism . Without enough iodine, ... and older children. Getting enough iodine in the diet may prevent a form of physical and intellectual ...

  12. Fluoride in diet

    Science.gov (United States)

    Diet - fluoride ... bones and teeth. Too much fluoride in the diet is very rare. Rarely, infants who get too ... of essential vitamins is to eat a balanced diet that contains a variety of foods from the ...

  13. Hepatocellular proliferation and hepatocarcinogen bioactivation in mice with diet-induced fatty liver and obesity.

    Science.gov (United States)

    Iatropoulos, M J; Duan, J-D; Jeffrey, A M; Leach, M W; Hayes, A N; Stedman, N L; Williams, G M

    2013-05-01

    Human liver cancer is in part associated with obesity and related metabolic diseases. The present study was undertaken in a mouse model of diet-induced obesity (DIO) and hepatic steatosis, conditions which can be associated with hepatic neoplasia, to determine whether the rates of cell proliferation or hepatocarcinogen bioactivation were altered in ways which could facilitate hepatocarcinogenesis. DIO mice were generated by feeding C57BL/6 (B6) male mice a high-fat diet beginning at 4 weeks of age; age-matched conventional lean (LEAN) B6 mice fed a low fat diet (10% Kcal from fat) were used for comparison. Groups of 28 week old DIO and LEAN mice were dosed with the bioactivation-dependent DNA-reactive hepatocarcinogen 2-acetylaminofluorene (AAF), at 2.24 or 22.4 mg/kg, given by gavage 3 times per week for 31 days, or received no treatment (DIO and LEAN control groups). Compared with the LEAN control group, the DIO control group had a higher mean body weight (16.5 g), higher mean absolute (1.4 g) and mean relative (25.5%) liver weights, higher (394%) liver triglyceride concentrations, and an increased incidence and severity of hepatocellular steatosis at the end of the dosing phase. The DIO control group also had a higher mean hepatocellular replicating fraction (31% increase, determined by proliferating cell nuclear antigen immunohistochemistry). Hepatocarcinogen bioactivation, based on formation of AAF DNA adducts as measured by nucleotide (32)P-postlabeling, was similar in both DIO and LEAN AAF-dosed groups. Thus, hepatocellular proliferation, but not hepatocarcinogen bioactivation, was identified as an alteration in livers of DIO mice which could contribute to their susceptibility to hepatocarcinogenesis. Copyright © 2012 Elsevier GmbH. All rights reserved.

  14. Thermogenesis induced by a high-carbohydrate meal in fasted lean and overweight young men: insulin, body fat, and sympathetic nervous system involvement.

    Science.gov (United States)

    Marques-Lopes, Iva; Forga, Luis; Martínez, J Alfredo

    2003-01-01

    This dietary trial was designed to evaluate the effect of an experimental short-term fasting period followed by a high-carbohydrate meal on energy expenditure, thermogenesis, and sympathetic nervous system activity in normal (body mass index 27 kg/m(2)) men who were healthy, non-diabetic or with no other endocrine disease, non-smokers, not taking oral prescription medications, and with a stable body weight for the previous 3 mo. Fasting and fed energy expenditures and diet-induced thermogenesis were measured after a high-carbohydrate meal in seven overweight and six lean young male subjects by indirect calorimetry. Heart rate, urinary excretion of catecholamines, serum glucose, and insulin were also measured over the experimental fasting (7.5 h) and postprandial (4 h) periods. After carbohydrate intake, overweight men showed a significantly higher energy production (kJ/kg of fat-free mass) than did lean individuals, and the diet-induced thermogenesis (percentage of energy intake) was positively correlated with body fat (kg), percentage of body fat, fat-free mass (kg), and fasting pre-meal serum insulin levels. Postprandial cumulative energy expenditure was directly associated with postprandial insulin response and with mean postprandial heart rate values. No significant differences in urinary catecholamines were found between lean and overweight men at basal conditions or during the study period. Overweight individuals showed similar short-term sympathetic nervous system responses induced by an experimental fasting period. Although diet-induced thermogenesis after carbohydrate intake was not statistically different between lean and overweight men, the postprandial insulin response and body fat content seemed to be involved in sympathetic nervous system activity.

  15. The effect of three different diets on risk factors for CVD. With focus on whole grain

    DEFF Research Database (Denmark)

    Christoffersen, Tenna

    2009-01-01

    , as assessed by homeostasis model assessment of insulin resistance (HOMA-IR) compared to the CTR diet (p=0.002). The LF diet resulted in a near significantly higher increase in lean body mass compared to the MUFA diet (p=0.052). Intake of WG (95g, 66g and 4g/10MJ in the MUFA, LF and CTR group respectively......) significantly differed between all groups; with the LF group not reaching the expected officially recommended intake (RI). A higher intake of WG resulted in a significantly lower increase in BW (p=0.041), fat mass (p=0.045), fasting insulin (pHOMA-IR (p

  16. Scaling Lean in primary care: impacts on system performance.

    Science.gov (United States)

    Hung, Dorothy Y; Harrison, Michael I; Martinez, Meghan C; Luft, Harold S

    2017-03-01

    We examined a wide range of performance outcomes after Lean methodology-a leading strategy to enhance efficiency and patient value-was implemented and scaled across all primary care clinics in a nonprofit, ambulatory care delivery system. Using a stepped wedge approach, we assessed changes associated with the phased introduction of Lean-based redesigns across 46 primary care departments in 17 different clinic locations. Longitudinal analysis of operational metrics included: workflow efficiency, physician productivity, operating expenses, clinical quality, and satisfaction among patients, physicians, and staff. We used interrupted time series analysis with generalized linear mixed models to estimate Lean impacts over time. Projected outcomes in the absence of changes (ie, counterfactuals) were compared with observed outcomes after Lean redesigns were implemented, and mean differences were assessed using 95% bias-corrected bootstrap confidence intervals (CIs). We observed systemwide improvements in workflow efficiencies (eg, 95% CI, 5.8-10.4) and physician productivity (95% CI, 3.9-27.2), with no adverse effects on clinical quality. Patient satisfaction increased with respect to access to care (95% CI, 15.2-20.7), handling of personal issues (95% CI, 2.1-6.9), and overall experience of care (95% CI, 11.0-17.0), but decreased with respect to interactions with care providers (95% CI, -13.4 to -5.7). Departmental operating costs decreased, and annual staff and physician satisfaction scores increased particularly among early adopters, with key improvements in employee engagement, connection to purpose, relationships with staff, and physician time spent working. Lean redesigns can benefit primary care patients, physicians, and staff without negatively impacting the quality of clinical care. Study results may lead other delivery system leaders to innovate using Lean techniques and may further enhance support for Lean learning among public and private payers.

  17. Leptin production during early starvation in lean and obese women.

    Science.gov (United States)

    Klein, S; Horowitz, J F; Landt, M; Goodrick, S J; Mohamed-Ali, V; Coppack, S W

    2000-02-01

    We evaluated abdominal adipose tissue leptin production during short-term fasting in nine lean [body mass index (BMI) 21 +/- 1 kg/m(2)] and nine upper body obese (BMI 36 +/- 1 kg/m(2)) women. Leptin kinetics were determined by arteriovenous balance across abdominal subcutaneous adipose tissue at 14 and 22 h of fasting. At 14 h of fasting, net leptin release from abdominal adipose tissue in obese subjects (10.9 +/- 1.9 ng x 100 g tissue x (-1) x min(-1)) was not significantly greater than the values observed in the lean group (7.6 +/- 2.1 ng x 100 g(-1) x min(-1)). Estimated whole body leptin production was approximately fivefold greater in obese (6.97 +/- 1.18 microg/min) than lean subjects (1.25 +/- 0.28 microg/min) (P production rates decreased in both lean and obese groups (to 3.10 +/- 1.31 and 10.5 +/- 2.3 ng x 100 g adipose tissue(-1) x min(-1), respectively). However, the relative declines in both arterial leptin concentration and local leptin production in obese women (arterial concentration 13.8 +/- 4.4%, local production 10.0 +/- 12.3%) were less (P lean women (arterial concentration 39.0 +/- 5.5%, local production 56.9 +/- 13.0%). This study demonstrates that decreased leptin production accounts for the decline in plasma leptin concentration observed after fasting. However, compared with lean women, the fasting-induced decline in leptin production is blunted in women with upper body obesity. Differences in leptin production during fasting may be responsible for differences in the neuroendocrine response to fasting previously observed in lean and obese women.

  18. Nonprofit, payload process improvement through lean management

    Science.gov (United States)

    Sampson, Melissa

    Organizations that are successful and competitive long-term have learned to efficiently utilize their resources, such as money, people, facilities, and time. Over the last half-century, there have been a variety of theories and techniques put forth on how to do this. One recent theory applied in the aerospace industry is Lean Management (LM), which emphasizes a customer focus and a rigorous elimination of activities that do not add value from the customer's perspective. LM has not, until now, been evaluated for small, nonprofit, one-off production organizations (NOPOs). Previous research on LM focused on for-profit companies and large-scale production organizations, producing relatively similar products repetitively (e.g. automobiles, commercial satellites, aircraft, and launch vehicles). One-off production organizations typically create one-of-a-kind products. The purpose of this research is to examine the applicability of LM to a NOPO. LM will improve resource utilization and thereby competitiveness, as well as exploring a new area of knowledge and research. The research methodology consists of conducting case studies, formal and informal interviews, observation and analysis in order to assess whether and how LM may be beneficial. The research focuses on one particular NOPO, BioServe Space Technologies (BST): a nonprofit, payload development organization. Additional NOPOs were interviewed in order to draw more generalized conclusions about LM benefits. The research demonstrates that LM is applicable to NOPOs, thus providing a tool to improve efficiency and competitiveness. Results from this research are guidelines for payload development organizations to implement LM, and highlighting potential LM weaknesses. A major conclusion is that LM needs some minor modifications to be applicable and useful to NOPOs, particularly in terms of value stream mapping. The LM implementation roadmap developed for NOPOs introduces customized metrics, as well as including standard

  19. Cardiovascular and metabolic responses to fasting and thermoneutrality are conserved in obese Zucker rats.

    Science.gov (United States)

    Overton, J M; Williams, T D; Chambers, J B; Rashotte, M E

    2001-04-01

    The primary purpose of the study was to test the hypothesis that reduced leptin signaling is necessary to elicit the cardiovascular and metabolic responses to fasting. Lean (Fa/?; normal leptin receptor; n = 7) and obese (fa/fa; mutated leptin receptor; n = 8) Zucker rats were instrumented with telemetry transmitters and housed in metabolic chambers at 23 degrees C (12:12-h light-dark cycle) for continuous (24 h) measurement of metabolic and cardiovascular variables. Before fasting, mean arterial pressure (MAP) was higher (MAP: obese = 103 +/- 3; lean = 94 +/- 1 mmHg), whereas oxygen consumption (VO(2): obese = 16.5 +/- 0.3; lean = 18.6 +/- 0.2 ml. min(-1). kg(-0.75)) was lower in obese Zucker rats compared with their lean controls. Two days of fasting had no effect on MAP in either lean or obese Zucker rats, whereas VO(2) (obese = -3.1 +/- 0.3; lean = -2.9 +/- 0.1 ml. min(-1). kg(-0.75)) and heart rate (HR: obese = -56 +/- 4; lean = -42 +/- 4 beats/min) were decreased markedly in both groups. Fasting increased HR variability both in lean (+1.8 +/- 0.4 ms) and obese (+2.6 +/- 0.3 ms) Zucker rats. After a 6-day period of ad libitum refeeding, when all parameters had returned to near baseline levels, the cardiovascular and metabolic responses to 2 days of thermoneutrality (ambient temperature 29 degrees C) were determined. Thermoneutrality reduced VO(2) (obese = -2.4 +/- 0.2; lean = -3.3 +/- 0.2 ml. min(-1). kg(-0.75)), HR (obese = -46 +/- 5; lean = -55 +/- 4 beats/min), and MAP (obese = -13 +/- 6; lean = -10 +/- 1 mmHg) similarly in lean and obese Zucker rats. The results indicate that the cardiovascular and metabolic responses to fasting and thermoneutrality are conserved in Zucker rats and suggest that intact leptin signaling may not be requisite for the metabolic and cardiovascular responses to reduced energy intake.

  20. Evaluation of Hypocaloric Diet With Protein Supplementation in Middle-Aged Sarcopenic Obese Women: A Pilot Study

    Directory of Open Access Journals (Sweden)

    Rosa Sammarco

    2017-05-01

    Full Text Available Objective: The aim of this study was to evaluate the efficacy of a nutritional program, which is characterized by a different modulation of proteins, in adult patients with sarcopenic obesity. Methods: We studied 18 obese women aged 41-74 years. Obesity was diagnosed as fat mass > 34.8% and sarcopenia was defined when lean body mass was Results: Weight significantly decreased in both groups. Women with high-protein diet preserved lean body mass compared to low-calorie diet and improved significantly muscle strength; SPPB score did not change in both groups. SF-36 test showed a significant change for general health after 4 months in group B. Conclusions: In our study, sarcopenic obese patients with high-protein diet showed an improvement in muscle strength. Furthermore, dietary protein enrichment may represent a protection from the risk of sarcopenia following a hypocaloric diet.

  1. Politically Conservative Preservice Teachers and the Spiral of Silence: Implications for Teacher Education

    Science.gov (United States)

    Journell, Wayne

    2017-01-01

    A common perception within politically conservative circles is that American colleges and universities are bastions of liberal thought led by left-leaning faculty who seek to indoctrinate their students into adopting progressive views of the world. The purpose of this study is not to debate or justify a progressive vision of teacher education.…

  2. Plasma endocannabinoid levels in lean, overweight and obese humans: relationships with intestinal permeability markers, inflammation and incretin secretion.

    Science.gov (United States)

    Little, Tanya J; Cvijanovic, Nada; DiPatrizio, Nicholas V; Argueta, Donovan A; Rayner, Christopher K; Feinle-Bisset, Christine; Young, Richard L

    2018-02-13

    Intestinal production of endocannabinoid and oleoylethanolamide (OEA) is impaired in high-fat diet/obese rodents, leading to reduced satiety. Such diets also alter the intestinal microbiome in association with enhanced intestinal permeability and inflammation, however little is known of these effects in humans. This study aimed to: (i) evaluate effects of lipid on plasma anandamide (AEA), 2-arachidonyl-sn-glycerol (2-AG) and OEA in humans, and (ii) examine relationships with intestinal permeability, inflammation markers and incretin hormone secretion. 20 lean, 18 overweight and 19 obese participants underwent intraduodenal Intralipid® infusion (2 kcal/min) with collection of endoscopic duodenal biopsies and blood. Plasma AEA, 2-AG, and OEA (HPLC/tandem mass spectrometry), tumour necrosis factor-α (TNF-α), glucagon-like peptide-1 (GLP-1) and glucose-dependent insulinotropic peptide (GIP) (multiplex), and duodenal expression of occludin, zona-occludin-1 (ZO-1), intestinal-alkaline-phosphatase (IAP), and toll-like receptor-4 (TLR4) (RT-PCR), were assessed. Fasting plasma AEA was increased in obese, compared with lean and overweight (Plean (Plean and overweight. The relationships between plasma AEA with duodenal ZO-1 and IAP, and GIP, suggest that altered endocannabinoid signalling may contribute to changes in intestinal permeability, inflammation and incretin release in human obesity.

  3. Improvement of laboratory turnaround time using lean methodology.

    Science.gov (United States)

    Gupta, Shradha; Kapil, Sahil; Sharma, Monica

    2018-05-14

    Purpose The purpose of this paper is to discuss the implementation of lean methodology to reduce the turnaround time (TAT) of a clinical laboratory in a super speciality hospital. Delays in report delivery lead to delayed diagnosis increased waiting time and decreased customer satisfaction. The reduction in TAT will lead to increased patient satisfaction, quality of care, employee satisfaction and ultimately the hospital's revenue. Design/methodology/approach The generic causes resulting in increasing TAT of clinical laboratories were identified using lean tools and techniques such as value stream mapping (VSM), Gemba, Pareto Analysis and Root Cause Analysis. VSM was used as a tool to analyze the current state of the process and further VSM was used to design the future state with suggestions for process improvements. Findings This study identified 12 major non-value added factors for the hematology laboratory and 5 major non-value added factors for the biochemistry lab which were acting as bottlenecks resulting in limiting throughput. A four-month research study by the authors together with hospital quality department and laboratory staff members led to reduction of the average TAT from 180 to 95minutes in the hematology lab and from 268 to 208 minutes in the biochemistry lab. Practical implications Very few improvement initiatives in Indian healthcare are based on industrial engineering tools and techniques, which might be due to a lack of interaction between healthcare and engineering. The study provides a positive outcome in terms of improving the efficiency of services in hospitals and identifies a scope for lean in the Indian healthcare sector. Social implications Applying lean in the Indian healthcare sector gives its own potential solution to the problem caused, due to a wide gap between lean accessibility and lean implementation. Lean helped in changing the mindset of an organization toward providing the highest quality of services with faster delivery at

  4. Aplicação da metodologia Lean Six Sigma para melhoria de um processo produtivo

    OpenAIRE

    Augusto Schaffer

    2016-01-01

    O Lean Six Sigma é a metodologia originada a partir da integração das metodologias Lean e Six Sigma. O Lean Six Sigma procura eliminar as perdas e reduzir os defeitos, agregando os benefícios de cada uma das duas metodologias que a dão origem. O objetivo deste trabalho é aplicar a metodologia Lean Six Sigma para melhoria de um processo produtivo. Neste trabalho é apresentada uma revisão bibliográfica sobre as metodologias Lean e Six Sigma, buscando a compreensão das origens do Lean Six Sigma,...

  5. Dissemination strategy for Lean thinking in health care.

    Science.gov (United States)

    Dannapfel, Petra; Poksinska, Bozena; Thomas, Kristin

    2014-01-01

    The purpose of this paper is to contribute to knowledge about dissemination strategies for Lean thinking throughout multiple healthcare organisations. The Ostergötland county council, Sweden (CCO) was chosen as a case study for an healthcare Lean-thinking dissemination strategies. Document analysis and interviews were used and results were compared with similar strategies employed by staff at the National Health Service Institute for Innovation (NHSI) and improvement in Great Britain and the Odense University Hospital in Denmark. The Lean improvement programme was introduced to tackle challenges such as an ageing society, rising care expectations and budgetary and economic constraints. It was designed as a long-term programme to create added value for patients and employee involvement. The dissemination strategy was: forming clear visions and objectives; piloting; training potential adopters; and formal dissemination. The CCO strategy was focused primarily on managers and was not meant to involve all staff until the implementation stage. Staff at the NHSI attempted to address nurses needs during dissemination, which questioned whether the CCO managers' dissemination strategy is sustainable. This paper inspires healthcare managers and decision makers who aim to disseminate Lean production in their organisations. There are many case studies describing Lean implementation in single healthcare organisations, but little is known about effective dissemination and implementation strategies in large healthcare systems. The authors, therefore, suggest activities for developing and implementing dissemination strategies in multiple healthcare organisations.

  6. The integration of lean, green and best practice business principles

    Directory of Open Access Journals (Sweden)

    Annelize Wiese

    2015-10-01

    Full Text Available Background: Whilst there are separate streams of established research on lean, green and best practice initiatives, the intersection of these three strategic principles has not been addressed extensively in the past. Objectives: In this study a framework to integrate lean, green and best practice principles into an integrated business model was developed as a strategy for businesses to develop sustainable competitive advantages. Method: A descriptive case study was conducted on Toyota South Africa Motors (TSAM to understand whether a clear link between the company’s environmental approach, lean principles and established best practice culture could be determined. In addition, the case study tested the view that the implementation of these three principles concurrently resulted in improved business results. Results: The main findings of the study revealed that TSAM’s commitment to lean, green and best practice business principles contributed and was directly linked to its business success in terms of sales and market position. Conclusion: It is recommended that businesses implement an integrated lean, green and best practice business model as a strategy to reduce costs and sustainably enhance profitably and competitiveness.

  7. Investigating emergency room service quality using lean manufacturing.

    Science.gov (United States)

    Abdelhadi, Abdelhakim

    2015-01-01

    The purpose of this paper is to investigate a lean manufacturing metric called Takt time as a benchmark evaluation measure to evaluate a public hospital's service quality. Lean manufacturing is an established managerial philosophy with a proven track record in industry. A lean metric called Takt time is applied as a measure to compare the relative efficiency between two emergency departments (EDs) belonging to the same public hospital. Outcomes guide managers to improve patient services and increase hospital performances. The patient treatment lead time within the hospital's two EDs (one department serves male and the other female patients) are the study's focus. A lean metric called Takt time is used to find the service's relative efficiency. Findings show that the lean manufacturing metric called Takt time can be used as an effective way to measure service efficiency by analyzing relative efficiency and identifies bottlenecks in different departments providing the same services. The paper presents a new procedure to compare relative efficiency between two EDs. It can be applied to any healthcare facility.

  8. Exploring the impact of Lean manufacturing on flexibility in SMEs

    Energy Technology Data Exchange (ETDEWEB)

    Lucherini, Franco; Rapaccini, Mario

    2017-07-01

    This paper describes the use of simulation and case-study research to assess flexibility gains induced by the adoption of three Lean Manufacturing practices. Design/methodology/approach: We gather useful material and information about the manufacturing process of a selected Small-Medium Enterprise by adopting a case-research approach. The Value Stream Mapping is the method used for visualizing flows of products and information along the production system. Starting from the current arrangement of the company, computer simulation is used to assess the benefits arising from Cellular Manufacturing, Just-in-Time Delivery by Suppliers, and Single Minute Exchange of Dies. Findings: To investigate the flexibility improvements coming from the introduction of Lean Manufacturing, we present a simulation model of the described company on which we performed our analysis. We quantify the flexibility of different configurations according to the new 5-step approach in order to segregate the contribution of different lean techniques. Originality/value: We extend the combined use of Case Research and Computer Simulation to the research on Manufacturing Flexibility within Small-Medium Enterprises. We enhance the knowledge on this under investigated context collecting quantitative field data. Moreover, building on the factorial Design of Experiment, we introduce a new 5-step method to appraise the cost benefit ratio of lean techniques for flexibility. The managerial implication of this research is mostly related to the provision of a supporting method for the decision making process propaedeutic to Lean Manufacturing introduction.

  9. Activity Behaviours in Lean and Morbidly Obese Pregnant Women.

    Science.gov (United States)

    Fazzi, Caterina; Mohd-Shukri, Nor; Denison, Fiona C; Saunders, David H; Norman, Jane E; Reynolds, Rebecca M

    2018-05-17

    Interventions to increase physical activity in pregnancy are challenging for morbidly obese women. Targeting sedentary behaviours may be a suitable alternative to increase energy expenditure. We aimed to determine total energy expenditure, and energy expended in sedentary activities in morbidly obese and lean pregnant women. We administered the Pregnancy Physical Activity Questionnaire PPAQ (non-objective) and the Actical accelerometer (objective) to morbidly obese (BMI≥40kg/m²) and lean (BMI≤25Kg/M²) pregnant women recruited in early (lean pregnant women. No differences were observed in the proportion of energy expended sedentary between lean and morbidly obese pregnant women. The greater total energy expenditure in morbidly obese pregnant women was corroborated by Actical accelerometer in early (n=14 per group, obese 1167.7 (313.6) Kcal; lean 781.1 (210.1) Kcal, plean 893.7 (175.9) Kcal, plean pregnant. Further studies are needed to determine whether sedentary behaviours are a suitable target for intervention in morbidly obese pregnancy. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  10. Exploring the impact of Lean manufacturing on flexibility in SMEs

    International Nuclear Information System (INIS)

    Lucherini, Franco; Rapaccini, Mario

    2017-01-01

    This paper describes the use of simulation and case-study research to assess flexibility gains induced by the adoption of three Lean Manufacturing practices. Design/methodology/approach: We gather useful material and information about the manufacturing process of a selected Small-Medium Enterprise by adopting a case-research approach. The Value Stream Mapping is the method used for visualizing flows of products and information along the production system. Starting from the current arrangement of the company, computer simulation is used to assess the benefits arising from Cellular Manufacturing, Just-in-Time Delivery by Suppliers, and Single Minute Exchange of Dies. Findings: To investigate the flexibility improvements coming from the introduction of Lean Manufacturing, we present a simulation model of the described company on which we performed our analysis. We quantify the flexibility of different configurations according to the new 5-step approach in order to segregate the contribution of different lean techniques. Originality/value: We extend the combined use of Case Research and Computer Simulation to the research on Manufacturing Flexibility within Small-Medium Enterprises. We enhance the knowledge on this under investigated context collecting quantitative field data. Moreover, building on the factorial Design of Experiment, we introduce a new 5-step method to appraise the cost benefit ratio of lean techniques for flexibility. The managerial implication of this research is mostly related to the provision of a supporting method for the decision making process propaedeutic to Lean Manufacturing introduction.

  11. Relationship-centered health care as a Lean intervention.

    Science.gov (United States)

    Dunsford, Jennifer; Reimer, Laura E

    2017-12-01

    Continuous improvement efforts, recognized in much literature as Lean management techniques have been used in efforts to improve efficiency in democratic health care contexts for some time to varying degrees of success. The complexity of the health care system is magnified by the sheer number of processes and sub processes required to deliver value within a bureaucratic environment, while maintaining some level of compassionate and personalized care. There is inherent tension between what is required to be efficient and what is required to be caring and this conflict presses against Lean practice at the level of delivery.Administration and care intersect at the point of the patient's experience. In order to achieve the dual goals of improved value and lower costs, the application of Lean thinking for meaningful health care reform must acknowledge the fundamental dichotomy between the impersonal tasks required to provide health services, and human interactions. Meaningful health care reform requires an acknowledgement of this distinction, currently not recognized in literature. While administrative process improvements are necessary, they are insufficient to achieve a sustainable and caring health care system. Lean thinking must be applied differently for administrative processes and patient care encounters, because these are fundamentally different processes. In this way, Lean principles will effectively contribute to sustainable health system improvements. © The Author 2017. Published by Oxford University Press in association with the International Society for Quality in Health Care. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  12. Exploring the impact of Lean manufacturing on flexibility in SMEs

    Directory of Open Access Journals (Sweden)

    Franco Lucherini

    2017-11-01

    Full Text Available Purpose: This paper describes the use of simulation and case-study research to assess flexibility gains induced by the adoption of three Lean Manufacturing practices. Design/methodology/approach: We gather useful material and information about the manufacturing process of a selected Small-Medium Enterprise by adopting a case-research approach. The Value Stream Mapping is the method used for visualizing flows of products and information along the production system. Starting from the current arrangement of the company, computer simulation is used to assess the benefits arising from Cellular Manufacturing, Just-in-Time Delivery by Suppliers, and Single Minute Exchange of Dies. Findings: To investigate the flexibility improvements coming from the introduction of Lean Manufacturing, we present a simulation model of the described company on which we performed our analysis. We quantify the flexibility of different configurations according to the new 5-step approach in order to segregate the contribution of different lean techniques. Originality/value: We extend the combined use of Case Research and Computer Simulation to the research on Manufacturing Flexibility within Small-Medium Enterprises. We enhance the knowledge on this under investigated context collecting quantitative field data. Moreover, building on the factorial Design of Experiment, we introduce a new 5-step method to appraise the cost benefit ratio of lean techniques for flexibility. The managerial implication of this research is mostly related to the provision of a supporting method for the decision making process propaedeutic to Lean Manufacturing introduction.

  13. Lean management-the journey from toyota to healthcare.

    Science.gov (United States)

    Teich, Sorin T; Faddoul, Fady F

    2013-04-01

    The evolution of production systems is tightly linked to the story of Toyota Motor Company (TMC) that has its roots around 1918. The term "lean" was coined in 1990 following the exploration of the Toyota model that led to the "transference" thesis sustaining the concept that manufacturing problems and technologies are universal problems faced by management and that these concepts can be emulated in non-Japanese enterprises. Lean is a multi-faceted concept and requires organizations to exert effort along several dimensions simultaneously; some consider a successful implementation either achieving major strategic components of lean, implementing practices to support operational aspects, or providing evidence that the improvements are sustainable in the long term. The article explores challenges and opportunities faced by organizations that intend incorporating lean management principles and presents the specific context of the healthcare industry. Finally, the concepts of "essential few" and customer value are illustrated through a simple example of process change following lean principles, which was implemented in a dental school in the United States.

  14. Parametric study of turbine NGV blade lean and vortex design

    Directory of Open Access Journals (Sweden)

    Zhang Shaowen

    2016-02-01

    Full Text Available The effects of blade lean and vortex design on the aerodynamics of a turbine entry nozzle guide vane (NGV are considered using computational fluid dynamics. The aim of the work is to address some of the uncertainties which have arisen from previous studies where conflicting results have been reported for the effect on the NGV. The configuration was initially based on the energy efficient engine turbine which also served as the validation case for the computational method. A total of 17 NGV configurations were evaluated to study the effects of lean and vortex design on row efficiency and secondary kinetic energy. The distribution of mass flow ratio is introduced as an additional factor in the assessment of blade lean effects. The results show that in the turbine entry NGV, the secondary flow strength is not a dominant factor that determines NGV losses and therefore the changes of loading distribution due to blade lean and the associated loss mechanisms should be regarded as a key factor. Radial mass flow redistribution under different NGV lean and twist is demonstrated as an addition key factor influencing row efficiency.

  15. Enhancing lean supply chain through traffic light quality management system

    Directory of Open Access Journals (Sweden)

    Md. Mazharul Islam

    2013-03-01

    Full Text Available Lean is a continuous journey to grow and excel the company. Any company want to develop and cope with the world pace must adopt lean. However, in most of the organizations the management culture or people’s mentality is not so good to embrace change. They have predestined mind set where no change is normally allowed. Lean is a cooperative way of working that involves all departments and all personnel to work together in a team for the betterment of the entire company. Without providing fixed solution of any problem it suggests the best way that people willingly accept to do. Lean normally deals with highest quality, shorter lead time and lowest cost. In Bangladesh, most of the garment manufacturing companies are experiencing a massive quality problem. We describe a case where traffic light, a tool of lean quality system was adopted to a garment manufacturing company in Bangladesh. We also provide the charts to contrast the before and after scenario in detail, in order to illustrate the company benefits. After the traffic light system being implemented, the quality status was improved, production capacity was increased; significant days were saved that enhanced the lead time and thus strengthen the supply chain.

  16. A Lean Six Sigma program in higher education

    KAUST Repository

    Svensson, Carsten

    2015-01-01

    Purpose The objective of this paper is to contribute to the body of Lean Six Sigma knowledge within the field of higher education institutions. The paper will review the initial phase of an implementation and highlight future challenges of applying the Lean Six Sigma method in a complex transactional environment. Design/methodology/approach The observations presented in this paper originate from rolling out a large Lean Six Sigma implementation at a recently established university. The paper is supported with secondary data from literature. Findings The implementation of Lean Six Sigma methodology at King Abdullah University of Science and Technology (KAUST) has resulted in improvements in business processes and efficiency. This has been achieved through project execution and training programs. Approximately 350 staff members have completed awareness training, 50 yellow belts and 150 green belts have been trained, and the first round of seven black belts have completed training of which two have completed certification. Research limitations/implications This paper is based on an empirical study of a single instance and the authors’ experiences as practitioners. Originality/value This paper is the first description of what is believed to be one of the largest implementations of Lean Six Sigma in higher education.

  17. Lean manufacturing implementation in reducing waste for electronic assembly line

    Directory of Open Access Journals (Sweden)

    Zakaria Nurul Husna

    2017-01-01

    Full Text Available Lean manufacturing is the most convenient way to eliminate unnecessary waste and can provide what customers demand. This paper presents possibilities and sustainability of application of lean manufacturing method by using a virtual simulation of the workers performance in a line production of small and medium industry. Actual case study and Witness simulation were used in this study to find the waste that exists in the production and identified the performance of workers in the production line. Lean manufacturing concept has identified and rectified problems related to low productivity in the assembly line. The case study is involved a line production for electronic part assembly. The result of this preliminary study should illustrate the relationship of worker’s performance by lean manufacturing method as well as the productivity improvements which help to reduce cost for manufacturer. Lean manufacturing method has been used during the study to reduce the cost when waste is eliminated by reducing the workstation without reducing the performance of the production. The performance of the production is increased when allocating the labor in a needed working area. Lastly, the study also proves that the new layout has improved the process to be used for future production process.

  18. Fad diets, miracle diets, diet cult… but no results.

    Directory of Open Access Journals (Sweden)

    Ignacio Jáuregui-Lobera

    2017-03-01

    Full Text Available Fad diets, miracle diets (in sum, diet cult are diets that make promises of weight loss or other health advantages (e.g. longer life without backing by solid science, and usually they are characterized by highly restrictive or unusual food choices. These diets are often supported by celebrities and some health “professionals”, and they result attractive among people who want to lose weight quickly. By means of pseudoscientific arguments, designers of fad, miracle or magic diets usually describe them as healthy diets with unusual properties but always with undoubted benefits. After revising the history of these diets and exploring the scientific evidence, it must be noted that there is not a diet better than eating less, moving more and eating lots of fruits and vegetables. In addition, it is necessary to be aware of our general daily habits, remembering that eating is important but it is not everything. Getting active is also very relevant to improve (or recover our health. Summarizing, eating healthy and taking care of yourself are a duty but not a miracle.

  19. Obesity And Laboratory Diets Affects Tissue Malondialdehyde (MDA) Levels In Obese Rats

    Science.gov (United States)

    Chowdhury, Parimal; Scott, Joseph; Holley, Andy; Hakkak, Reza

    2010-04-01

    This study was conducted to investigate the interaction of obesity and laboratory diets on tissue malondialdehyde levels in rats. Female Zucker obese and lean rats were maintained on either regular grain-based diet or purified casein diet for two weeks, orally gavaged at day 50 with 65 mg/kg DMBA and sacrificed 24 hrs later. Malondialdehyde (MDA) levels were measured in blood and harvested tissues. Data were recorded as mean ± SEM and analyzed statistically. Results show that the obese group on purified casein diet had reduction of MDA levels in the brain, duodenum, liver, lung and kidney tissues as compared to lean group, p <0.05. Obese group on grain-based diet showed significant increase in MDA levels only in the duodenum, p <0.05. We conclude that dietary intervention differentially affects the oxidative markers in obese rats. It appears that purified casein diets were more effective than grain-based diet in reduction of oxidative stress in obese rats.

  20. The Nutritional Geometry of Resource Scarcity: Effects of Lean Seasons and Habitat Disturbance on Nutrient Intakes and Balancing in Wild Sifakas.

    Directory of Open Access Journals (Sweden)

    Mitchell T Irwin

    Full Text Available Animals experience spatial and temporal variation in food and nutrient supply, which may cause deviations from optimal nutrient intakes in both absolute amounts (meeting nutrient requirements and proportions (nutrient balancing. Recent research has used the geometric framework for nutrition to obtain an improved understanding of how animals respond to these nutritional constraints, among them free-ranging primates including spider monkeys and gorillas. We used this framework to examine macronutrient intakes and nutrient balancing in sifakas (Propithecus diadema at Tsinjoarivo, Madagascar, in order to quantify how these vary across seasons and across habitats with varying degrees of anthropogenic disturbance. Groups in intact habitat experience lean season decreases in frugivory, amounts of food ingested, and nutrient intakes, yet preserve remarkably constant proportions of dietary macronutrients, with the proportional contribution of protein to the diet being highly consistent. Sifakas in disturbed habitat resemble intact forest groups in the relative contribution of dietary macronutrients, but experience less seasonality: all groups' diets converge in the lean season, but disturbed forest groups largely fail to experience abundant season improvements in food intake or nutritional outcomes. These results suggest that: (1 lemurs experience seasonality by maintaining nutrient balance at the expense of calories ingested, which contrasts with earlier studies of spider monkeys and gorillas, (2 abundant season foods should be the target of habitat management, even though mortality might be concentrated in the lean season, and (3 primates' within-group competitive landscapes, which contribute to variation in social organization, may vary in complex ways across habitats and seasons.

  1. Lean Now-Using a Research Community to Understand Change in the Aquisition Enterprise (Defense Acquisition Review Journal)

    National Research Council Canada - National Science Library

    2004-01-01

    Members of the Lean Aerospace Initiative (LAI) consortium have joined to pool experience and expertise to accelerate the adoption of Lean practices in military acquisition through an initiative called Lean Now...

  2. LEAN AND SIX SIGMA CONCEPTS APPLICATION IN PHARMACEUTICAL INDUSTRY

    Directory of Open Access Journals (Sweden)

    Katarina Pavlović

    2012-03-01

    Full Text Available LEAN thinking and Six Sigma have been utilized by manufacturing industries to decrease cost and improve quality and productivity by reducing variation and production defects [1]. Because of the dramatic successes in manufacturing, there is rising interest among companies in the pharmaceutical industry, which chooses to implement LEAN in order to accomplish such goals as decreased wait time to release product to the market, reduce production waste, and improve communication with end users and raize quality level both in the production and in testing laboratories. In this article, basics of LEAN and Six Sigma are presented and suggestion was given for application of their concepts in pharmaceutical industry together with harmonization with legal regulation represented by requirements Good Manufacturing Practice (cGMP, in order to work "smarter", more cost-effectively and avoid was ting time and other resources.

  3. LEAN AND SIX SIGMA CONCEPTS - APPLICATION IN PHARMACEUTICAL INDUSTRY

    Directory of Open Access Journals (Sweden)

    Katarina Pavlović

    2011-06-01

    Full Text Available LEAN thinking and Six Sigma have been utilized by manufacturing industries to decrease cost and improve quality and productivity by reducing variation and production defects. Because of the dramatic successes in manufacturing, there is rising interest among companies in the pharmaceutical industry, which choose to implement LEAN in order to accomplish such goals as decreased wait time to release product to the market, reduce production waste, improve communication with end users and raise quality level both in the production and in testing laboratories. In this article, basics of LEAN and Six Sigma are presented and suggestion was given for application of their concepts in pharmaceutical industry together with harmonization with legal regulation represented by requirements Good Manufacturing Practice (cGMP, in order to work "smarter", more cost- effectively and avoid wasting time and other resources.

  4. Development Of Lean Assembly Line – A Case Study

    Directory of Open Access Journals (Sweden)

    D. Rajenthirakumar

    2014-12-01

    Full Text Available This paper describes the implementation of lean tools in a wind mill-electrical control panel assembly plant in south India as a lean manufacturing improvement initiative. This involved mapping the activities of the firm, identifying opportunities for improvement and then undertaking with the firm an improvement programme. Current state map is prepared to describe the existing position and various problem areas. Takt time calculations are carried out to set the pace of production. Future state map is prepared to show the proposed improvement action plans. The achievements of value stream implementation are reduction in lead time, cycle time and inventory level. It was found that even a small company can make significant improvements by adopting lean principles.

  5. Sustainable cost reduction by lean management in metallurgical processes

    Directory of Open Access Journals (Sweden)

    A. V. Todorut

    2016-10-01

    Full Text Available This paper focuses on the need for sustainable cost reduction in the metallurgical industry by applying Lean Management (LM tools and concepts in metallurgical production processes leading to increased competitiveness of corporations in a global market. The paper highlights that Lean Management is a novel way of thinking, adapting to change, reducing waste and continuous improvement, leading to sustainable development of companies in the metallurgical industry. The authors outline the main Lean Management instruments based on recent scientific research and include a comparative analysis of other tools, such as Sort, Straighten, Shine, Standardize, Sustain (5S, Visual Management (VM, Kaizen, Total Productive Maintenance (TPM, Single-Minute Exchange of Dies (SMED, leading to a critical appraisal of their application in the metallurgical industry.

  6. Subclinical hypothyroidism in danish lean and obese children and adolescents

    DEFF Research Database (Denmark)

    Dahl, Maria; Ohrt, Johanne Dam; Fonvig, Cilius Esmann

    2017-01-01

    : The prevalence of SH was higher among overweight/obese compared to lean study participants (10.4% vs. 6.4%, p=0.0001). In the overweight/obese group, fasting serum TSH concentrations were associated positively with BMI SDS (p... developmental stage, whereas fasting serum fT4 concentrations were associated positively only with WHtR. The odds ratio of exhibiting SH was 1.8 when being overweight/obese compared with lean (p=0.0007) and 1.8 when presenting with a WHtR >0.5 (p=0.0003). Conclusion: The prevalence of SH was higher among......Objective: Thyroid abnormalities are common in obese children. The aim of the present study was to examine the prevalence of subclinical hypothyroidism (SH) and to determine how circulating thyroid hormone concentrations correlate with anthropometrics in Danish lean and obese children...

  7. Lean, green and resilient practices influence on supply chain performance

    DEFF Research Database (Denmark)

    Govindan, K.; Azevedo, S. G.; Carvalho, H.

    2015-01-01

    performance and to classify them according to their driving or dependence power. According to this research, the practices with the main driving power are just-in-time (lean practice), flexible transportation (resilient practice) and environmentally friendly packaging (green practice). Customer satisfaction...... of the lean, green and resilient practices is expected to be of great value for their effective implementation by the automotive companies. The interpretive structural modeling approach is used as a useful methodology to identify inter-relationships among lean, green and resilient practices and supply chain...... is the performance measure with strong dependence and weak driving power; that is, it is strongly influenced by the other researched variables but does not affect them....

  8. Experience in applying lean production concepts in the service sector

    Directory of Open Access Journals (Sweden)

    Dyrina Evgeniya

    2016-01-01

    Full Text Available This article describes the experience of implementing lean production tools in the company services. The authors have based the research of the chef’s work, built Ishikawa’s diagram on one of the most important problems of the company and proposed the cyclogram of cooks at work. Problems were identified using this technology after analyzing domestic and foreign experience in implementing lean production. The algorithm for implementing lean production and the necessary tools for achievement of the goals of the enterprise were authored on the basis of experience gained analyses of theoretical materials, which were tested on the basis of the small business «White Dragon».

  9. GREEN LEAN METHODOLOGY: ENTERPRISE ENERGY MANAGEMENT FOR INDUSTRIAL COMPANIES

    Directory of Open Access Journals (Sweden)

    Alin POSTEUCĂ

    2013-05-01

    Full Text Available The purpose of this article is to show the usefulness of Lean Manufacturing techniques when approaching the environmental issues. Green Lean Methodology presentation in seven steps with afferent tools and techniques provides a practical framework. Green Lean Methodology follows the Deming’s cycle (PDCA and it aims to achieve the continuous incremental improvement. Increasing the resource use effectiveness is achieved not only by protecting natural resources, but also by increasing productivity. These environmental gains through productivity are possible by continuously reducing losses in transformation processes, by designing/redesigning products and services in order to prevent undesirable environmental effects, by designing the control procedures in the processing flows, by increasing the capital investment in more efficient technology, by continuously improving work performance, by changing the perceptions of senior managers and by a more efficient and effective research and innovation. Keywords

  10. USE OF LEAN PRODUCTION INSTRUMENTS IN DESIGNING THE EDUCATIONAL PROCESS

    Directory of Open Access Journals (Sweden)

    Elietta P. Burnasheva

    2016-03-01

    Full Text Available Introduction: the concept of lean production seeks not a reduction of costs but complete elimination of losses that do not bring added value to the product or service. In any system, in all processes – from production and assembly, to hospitality, education, health, transport and social services – there are hidden losses. Teaching itself is a kind of production process in which a certain “product” (student acquires the added value (knowledge and skills, that is why it has become topical in educational institution to establish the working group on introduction of lean production into the learning process. The article presents the factors that are to be taken into account while designing the educational process based on the lean production principles. Materials and Methods: methods of analysis of existing system of vocational training in higher school, monitoring of the results of educational practice, modeling and experimental work in the process of analytical work were used. Results: important direction for eliminating losses in the educational process is the development of the interlinked curricula, allowing to avoid repeated study of a number of didactic units in the organization of continuous training in the system “Vocational education – Higher education”. In order to eliminate the possibility of incompetent graduate one should focus on the organisation of objective final control. Losses in education are caused by to the mismatch between labour market demand and the spectrum of areas of training in educational institutions. Discussion and Conclusions: the lean production possibilities are defined as instrumental in ensuring the organisation of “the process of lean learning”: by applying some lean production instruments such as the designing of the educational process, preventing of “faulty work” while training students, the attuning of the training system to employers’ requests, the visualisation of the education

  11. Lean methodology for performance improvement in the trauma discharge process.

    Science.gov (United States)

    O'Mara, Michael Shaymus; Ramaniuk, Aliaksandr; Graymire, Vickie; Rozzell, Monica; Martin, Stacey

    2014-07-01

    High-volume, complex services such as trauma and acute care surgery are at risk for inefficiency. Lean process improvement can reduce health care waste. Lean allows a structured look at processes not easily amenable to analysis. We applied lean methodology to the current state of communication and discharge planning on an urban trauma service, citing areas for improvement. A lean process mapping event was held. The process map was used to identify areas for immediate analysis and intervention-defining metrics for the stakeholders. After intervention, new performance was assessed by direct data evaluation. The process was completed with an analysis of effect and plans made for addressing future focus areas. The primary area of concern identified was interservice communication. Changes centering on a standardized morning report structure reduced the number of consult questions unanswered from 67% to 34% (p = 0.0021). Physical therapy rework was reduced from 35% to 19% (p = 0.016). Patients admitted to units not designated to the trauma service had 1.6 times longer stays (p miscommunication exists around patient education at discharge. Lean process improvement is a viable means of health care analysis. When applied to a trauma service with 4,000 admissions annually, lean identifies areas ripe for improvement. Our inefficiencies surrounded communication and patient localization. Strategies arising from the input of all stakeholders led to real solutions for communication through a face-to-face morning report and identified areas for ongoing improvement. This focuses resource use and identifies areas for improvement of throughput in care delivery.

  12. High-fat diet determines the composition of the murine gut microbiome independently of obesity.

    Science.gov (United States)

    Hildebrandt, Marie A; Hoffmann, Christian; Sherrill-Mix, Scott A; Keilbaugh, Sue A; Hamady, Micah; Chen, Ying-Yu; Knight, Rob; Ahima, Rexford S; Bushman, Frederic; Wu, Gary D

    2009-11-01

    The composition of the gut microbiome is affected by host phenotype, genotype, immune function, and diet. Here, we used the phenotype of RELMbeta knockout (KO) mice to assess the influence of these factors. Both wild-type and RELMbeta KO mice were lean on a standard chow diet, but, upon switching to a high-fat diet, wild-type mice became obese, whereas RELMbeta KO mice remained comparatively lean. To investigate the influence of diet, genotype, and obesity on microbiome composition, we used deep sequencing to characterize 25,790 16S rDNA sequences from uncultured bacterial communities from both genotypes on both diets. We found large alterations associated with switching to the high-fat diet, including a decrease in Bacteroidetes and an increase in both Firmicutes and Proteobacteria. This was seen for both genotypes (ie, in the presence and absence of obesity), indicating that the high-fat diet itself, and not the obese state, mainly accounted for the observed changes in the gut microbiota. The RELMbeta genotype also modestly influenced microbiome composition independently of diet. Metagenomic analysis of 537,604 sequence reads documented extensive changes in gene content because of a high-fat diet, including an increase in transporters and 2-component sensor responders as well as a general decrease in metabolic genes. Unexpectedly, we found a substantial amount of murine DNA in our samples that increased in proportion on a high-fat diet. These results demonstrate the importance of diet as a determinant of gut microbiome composition and suggest the need to control for dietary variation when evaluating the composition of the human gut microbiome.

  13. Can Teachers “Lean in”? Family Responsibilities Discrimination

    Directory of Open Access Journals (Sweden)

    Lauren Bock Mullins

    2016-02-01

    Full Text Available This qualitative study uses grounded theory to explore family responsibilities discrimination (FRD as it relates to school teacher discretion at work and at home, and career advancement within the context of leaning in. The results of the analysis of the data from semi-structured interviews and exit surveys provide preliminary evidence that teachers’ discretion is affected by their family responsibilities and perception of FRD, and that career advancement is directly and indirectly affected by FRD. Impediments to school teachers’ willingness and ability to lean in are identified as themes, and suggestions are offered to improve workplace rights for teachers with family responsibilities.

  14. Clinical and biochemical profile of lean type 2 diabetes mellitus

    OpenAIRE

    Barma, Punyakrit Deb; Ranabir, Salam; Prasad, Lallan; Singh, Thangjam Premchand

    2011-01-01

    Background: Type 2 diabetes mellitus is the most prevalent form of diabetes worldwide. In western countries majority of the cases are obese. The scenario may be different in certain parts of India. Various studies have reported a high prevalence of lean type 2 diabetes mellitus with a body mass index < 19 kg/m 2 . Materials and Methods: We evaluated 100 cases of lean type 2 diabetes mellitus (62 males and 38 females). Results and Conclusion: The mean duration of diabetes was 51.7 months (rang...

  15. An integrated lean-methods approach to hospital facilities redesign.

    Science.gov (United States)

    Nicholas, John

    2012-01-01

    Lean production methods for eliminating waste and improving processes in manufacturing are now being applied in healthcare. As the author shows, the methods are appropriate for redesigning hospital facilities. When used in an integrated manner and employing teams of mostly clinicians, the methods produce facility designs that are custom-fit to patient needs and caregiver work processes, and reduce operational costs. The author reviews lean methods and an approach for integrating them in the redesign of hospital facilities. A case example of the redesign of an emergency department shows the feasibility and benefits of the approach.

  16. Brown-McLean Syndrome in a Pediatric Patient

    Science.gov (United States)

    Tourkmani, Abdo Karim; Martinez, Jaime D.; Berrones, David; Juárez-Domínguez, Brenda Y.; Beltrán, Francisco; Galor, Anat

    2015-01-01

    The purpose of this manuscript is to report the case of a 12-year-old patient who presented for routine ophthalmic examination after congenital cataract surgery performed at 2 months of age. The patient was diagnosed with bilateral Brown-McLean syndrome by slit lamp examination. No treatment was required because the patient was asymptomatic and had a clear central cornea. This is the first described case of Brown-McLean syndrome in a pediatric patient, representing the importance of clinical examination in the pediatric age group after cataract surgery because of the risk for patients of developing peripheral edema. PMID:26034485

  17. Juego de rol Lean Six Sigma para empresas

    OpenAIRE

    Moldon Garrido, David; Porqueras Vila, Olga

    2015-01-01

    El objetivo del presente trabajo es la creación de un juego de rol que sirva a las empresas como formación. El fin de este juego es concienciar y formar a los trabajadores en la metodología Lean Six Sigma. Lean Six Sigma es una metodología centrada en la mejora continua para reducir los costes de la no calidad. Estos costes son aquellos generados por la producción de material o servicios que no cumplen los requerimientos del cliente. Creamos un juego de rol en el que los participantes form...

  18. Lean buffering in serial production lines with Bernoulli machines

    Directory of Open Access Journals (Sweden)

    A. B. Hu

    2006-01-01

    Full Text Available Lean buffering is the smallest buffer capacity necessary to ensure the desired production rate of a manufacturing system. In this paper, analytical methods for selecting lean buffering in serial production lines are developed under the assumption that the machines obey the Bernoulli reliability model. Both closed-form expressions and recursive approaches are investigated. The cases of identical and nonidentical machines are analyzed. Results obtained can be useful for production line designers and production managers to maintain the required production rate with the smallest possible inventories.

  19. Continuous improvement processes using Lean Management tools. A case study

    Directory of Open Access Journals (Sweden)

    Pârv Luminița

    2017-01-01

    Full Text Available The paper describes how Lean Management may be applied in the university setting to improve the management processes. The correlation of didactic, educational and research activities with the stakeholders needs is one of the main objectives of the university. In this respect, an indicator used to analyse a university, for the purposes of fulfilling its mission, respectively for the purposes of streamlining its didactic and scientific activity, is related to the number of graduates on the labour market, acting in their area of specialization. This work presents a best practice of Lean Management at Transilvania University of Brasov, Romania.

  20. Lean and Efficient Software: Whole Program Optimization of Executables

    Science.gov (United States)

    2016-12-31

    19b. TELEPHONE NUMBER (Include area code) 12/31/2016 Final Technical Report (Phase I - Base Period) 30-06-2014 - 31-12-2016 Lean and Efficient...Software: Whole-Program Optimization of Executables Final Report Evan Driscoll Tom Johnson GrammaTech, Inc. 531 Esty Street Ithaca, NY 14850 Office of...hardening U U U UU 30 Tom Johnson (607) 273-7340 x.134 Page 1 of 30 “ Lean and Efficient Software: Whole-Program Optimization of Executables