WorldWideScience

Sample records for diamond-like carbon coating

  1. Flexible diamond-like carbon film coated on rubber

    NARCIS (Netherlands)

    Pei, Y.T.; Bui, X.L.; Pal, J.P. van der; Martinez-Martinez, D.; Hosson, J.Th.M. De

    2013-01-01

    Dynamic rubber seals are major sources of friction of lubrication systems and bearings, which may take up to 70% of the total friction. The solution we present is to coat rubbers with diamond-like carbon (DLC) thin films by which the coefficient of friction is reduced to less than one tenth. Coating

  2. Stress in tungsten carbide-diamond like carbon multilayer coatings

    NARCIS (Netherlands)

    Pujada, B.R.; Tichelaar, F.D.; Janssen, G.C.A.M.

    2007-01-01

    Tungsten carbide-diamond like carbon (WC-DLC) multilayer coatings have been prepared by sputter deposition from a tungsten-carbide target and periodic switching on and off of the reactive acetylene gas flow. The stress in the resulting WC-DLC multilayers has been studied by substrate curvature. Peri

  3. Growth stress in tungsten carbide-diamond-like carbon coatings

    NARCIS (Netherlands)

    Pujada, B.R.; Tichelaar, F.D.; Arnoldbik, W.M.; Sloof, W.G.; Janssen, G.C.A.M.

    2009-01-01

    Growth stress in tungsten carbide-diamond-like carbon coatings, sputter deposited in a reactive argon/acetylene plasma, has been studied as a function of the acetylene partial pressure. Stress and microstructure have been investigated by wafer curvature and transmission electron microscopy (TEM) whe

  4. High Energy Radial Deposition of Diamond-Like Carbon Coatings

    Directory of Open Access Journals (Sweden)

    Konrad Suschke

    2015-07-01

    Full Text Available Diamond-like carbon (DLC coatings were deposited with a new direct ion deposition system using a novel 360 degree ion source operating at acceleration voltage between 4 and 8 kV. Cross-sectional TEM images show that the coatings have a three layered structure which originates from changes in the deposition parameters taking into account ion source condition, ion current density, deposition angles, ion sputtering and ion source movement. Varying structural growth conditions can be achieved by tailoring the deposition parameters. The coatings show good promise for industrial use due to their high hardness, low friction and excellent adhesion to the surface of the samples.

  5. Optically transparent, scratch-resistant, diamond-like carbon coatings

    Science.gov (United States)

    He, Xiao-Ming; Lee, Deok-Hyung; Nastasi, Michael A.; Walter, Kevin C.; Tuszewski, Michel G.

    2003-06-03

    A plasma-based method for the deposition of diamond-like carbon (DLC) coatings is described. The process uses a radio-frequency inductively coupled discharge to generate a plasma at relatively low gas pressures. The deposition process is environmentally friendly and scaleable to large areas, and components that have geometrically complicated surfaces can be processed. The method has been used to deposit adherent 100-400 nm thick DLC coatings on metals, glass, and polymers. These coatings are between three and four times harder than steel and are therefore scratch resistant, and transparent to visible light. Boron and silicon doping of the DLC coatings have produced coatings having improved optical properties and lower coating stress levels, but with slightly lower hardness.

  6. Cell attachment on diamond-like carbon coating

    Indian Academy of Sciences (India)

    D J Li; H Q Gu

    2002-02-01

    Preliminary results of diamond-like carbon (DLC) coating with its novel properties with no toxicity have caused a strong interest of commercial manufacturers of surgical implants. DLC coatings were prepared on polymethylmethacrylate (PMMA) at room temperature using ion beam assisted deposition (IBAD). It could be shown by X-ray photoelectron spectroscopy, Auger electron spectroscopy, and Raman spectroscopy that DLC coating prepared by 800 eV CH+ beam bombardment possessed a higher fraction of 3 bonds in the structure of mixed 3 + 2 bonding, resulting in a higher hydrophobicity. The results of the cell attachment tests indicated that DLC coatings exhibited low macrophage attachment and provided desirable surface for the normal cellular growth and morphology of the fibroblasts. At the same time, the number of both neutral granulocytes and platelets adhering to DLC coatings decreased significantly. These findings showed that DLC was a better coating with desirable tissue and blood compatibility.

  7. Plasma Processes : Microwave plasma deposition of diamond like carbon coatings

    Indian Academy of Sciences (India)

    D S Patil; K Ramachandran; N Venkatramani; M Pandey; R D'Cunha

    2000-11-01

    The promising applications of the microwave plasmas have been appearing in the fields of chemical processes and semiconductor manufacturing. Applications include surface deposition of all types including diamond/diamond like carbon (DLC) coatings, etching of semiconductors, promotion of organic reactions, etching of polymers to improve bonding of the other materials etc. With a 2.45 GHz, 700 W, microwave induced plasma chemical vapor deposition (CVD) system set up in our laboratory we have deposited diamond like carbon coatings. The microwave plasma generation was effected using a wave guide single mode applicator. We have deposited DLC coatings on the substrates like stainless steel, Cu–Be, Cu and Si. The deposited coatings have been characterized by FTIR, Raman spectroscopy and ellipsometric techniques. The results show that we have achieved depositing ∼ 95% sp3 bonded carbon in the films. The films are uniform with golden yellow color. The films are found to be excellent insulators. The ellipsometric measurements of optical constant on silicon substrates indicate that the films are transparent above 900 nm.

  8. Microwave plasma deposition of diamond like carbon coatings

    Science.gov (United States)

    Patil, D. S.; Ramachandran, K.; Venkataramani, N.; Pandey, M.; D'Cunha, R.

    2000-11-01

    he promising applications of the microwave plasmas have been appearing in the fields of chemical processes and semiconductor manufacturing. Applications include surface deposition of all types including diamond/diamond like carbon (DLC) coatings, etching of semiconductors, promotion of organic reactions, etching of polymers to improve bonding of the other materials etc. With a 2.45 GHz, 700 W, microwave induced plasma chemical vapor deposition (CVD) system set up in our laboratory we have deposited diamond like carbon coatings. The microwave plasma generation was effected using a wave guide single mode applicator. We have deposited DLC coatings on the substrates like stainless steel, Cu--Be, Cu and Si. The deposited coatings have been characterized by FTIR, Raman spectroscopy and ellipsometric techniques. The results show that we have achieved depositing ~ 95% sp3 bonded carbon in the films. The films are uniform with golden yellow color. The films are found to be excellent insulators. The ellipsometric measurements of optical constant on silicon substrates indicate that the films are transparent above 900 nm.

  9. Atmospheric Plasma Deposition of Diamond-like Carbon Coatings

    Energy Technology Data Exchange (ETDEWEB)

    Ladwig, Angela

    2008-01-23

    There is great demand for thin functional coatings in the semiconductor, optics, electronics, medical, automotive and aerospace industries [1-13]. As fabricated components become smaller and more complex, the properties of the materials’ surface take on greater importance. Thin coatings play a key role in tailoring surfaces to give them the desired hardness, wear resistance, chemical inertness, and electrical characteristics. Diamond-like carbon (DLC) coatings possess an array of desirable properties, including outstanding abrasion and wear resistance, chemical inertness, hardness, a low coefficient of friction and exceptionally high dielectric strength [14-22]. Diamond-like carbon is considered to be an amorphous material, containing a mixture of sp2 and sp3 bonded carbon. Based on the percentage of sp3 carbon and the hydrogen content, four different types of DLC coatings have been identified: tetrahedral carbon (ta-C), hydrogenated amorphous carbon (a-C:H) hard, a-C:H soft, and hydrogenated tetrahedral carbon (ta-C:H) [20,24,25]. Possessing the highest hardness of 80 GPa, ta-C possesses an sp3 carbon content of 80 to 88u%, and no appreciable hydrogen content whereas a-C:H soft possesses a hardness of less than 10 GPa, contains an sp3 carbon content of 60% and a hydrogen content between 30 to 50%. Methods used to deposit DLC coatings include ion beam deposition, cathodic arc spray, pulsed laser ablation, argon ion sputtering, and plasma-enhanced chemical vapor deposition [73-83]. Researchers contend that several advantages exist when depositing DLC coatings in a low-pressure environment. For example, ion beam processes are widely utilized since the ion bombardment is thought to promote denser sp3-bonded carbon networks. Other processes, such as sputtering, are better suited for coating large parts [29,30,44]. However, the deposition of DLC in a vacuum system has several disadvantages, including high equipment cost and restrictions on the size and shape of

  10. Diamond/diamond-like carbon coated nanotube structures for efficient electron field emission

    Science.gov (United States)

    Dimitrijevic, Steven (Inventor); Withers, James C. (Inventor); Loutfy, Raouf O. (Inventor)

    2005-01-01

    The present invention is directed to a nanotube coated with diamond or diamond-like carbon, a field emitter cathode comprising same, and a field emitter comprising the cathode. It is also directed to a method of preventing the evaporation of carbon from a field emitter comprising a cathode comprised of nanotubes by coating the nanotube with diamond or diamond-like carbon. In another aspect, the present invention is directed to a method of preventing the evaporation of carbon from an electron field emitter comprising a cathode comprised of nanotubes, which method comprises coating the nanotubes with diamond or diamond-like carbon.

  11. Investigation on the formation of tungsten carbide in tungsten-containing diamond like carbon coatings

    NARCIS (Netherlands)

    Strondl, C.; Carvalho, N.M.; Hosson, J.Th.M. De; Kolk, G.J. van der

    2003-01-01

    A series of tungsten-containing diamond-like carbon (Me-DLC) coatings have been produced by unbalanced magnetron sputtering using a Hauzer HTC-1000 production PVD system. Sputtering from WC targets has been used to form W-C:H coatings. The metal to carbon ratio has been varied to study changes in th

  12. Flexible diamond-like carbon thin film coated rubbers: fundamentals and applications

    NARCIS (Netherlands)

    Pei, Y.T.

    2015-01-01

    Dynamic rubber seals are major sources of friction of lubrication systems and bearings, which may take up to 75% of the total friction. The solution we present is to coat rubbers with diamond-like carbon (DLC) thin film, by which the coefficient of friction is reduced to less than one tenth. Coating

  13. Superlow friction behavior of diamond-like carbon coatings: Time and speed effects

    Science.gov (United States)

    Heimberg, J. A.; Wahl, K. J.; Singer, I. L.; Erdemir, A.

    2001-04-01

    The friction behavior of a diamond-like carbon coating was studied in reciprocating sliding contact at speeds from 0.01 to 5 mm/s, in dry nitrogen. "Superlow" friction coefficients of 0.003-0.008 were obtained in continuous sliding at the higher speeds (>1 mm/s). However, friction coefficients rose to values typical of diamond-like carbon in dry and ambient air (0.01-0.1) at lower speeds (sustained, suppressed, and recovered as a function of exposure time, demonstrating that duty cycle cannot be ignored when predicting performance of superlow friction coatings in devices.

  14. Flexible diamond-like carbon thin film coated on rubbers: fundamentals and applications

    NARCIS (Netherlands)

    Pei, Yutao

    2015-01-01

    Dynamic rubber seals are the major source of friction in lubrication systems and bearings, which may take up to 70% of the total friction. Our solution is to coat rubbers with flexible diamond-like carbon (DLC) thin film by which the coefficient of friction is reduced from above 1.5 to below 0.15. C

  15. Compilation of diamond-like carbon properties for barriers and hard coatings

    Energy Technology Data Exchange (ETDEWEB)

    Outka, D.A.; Hsu, Wen L.; Phillips, K.; Boehme, D.R.; Yang, N.Y.C.; Ottesen, D.K.; Johnsen, H.A.; Clift, W.M. [Sandia National Labs., Livermore, CA (United States); Headley, T.J. [Sandia National Labs., Albuquerque, NM (United States)

    1994-05-01

    Diamond-like carbon (DLC) is an amorphous form of carbon which resembles diamond in its hardness, lubricity, and resistance to chemical attack. Such properties make DLC of interest for use in barrier and hard coating technology. This report examines a variety of properties of DLC coatings. This includes examining substrates on which DLC coatings can be deposited; the resistance of DLC coatings to various chemical agents; adhension of DLC coatings; and characterization of DLC coatings by electron microscopy, FTIR, sputter depth profiling, stress measurements and nanoindentation.

  16. Selective formation of diamond-like carbon coating by surface catalyst patterning

    DEFF Research Database (Denmark)

    Palnichenko, A.V.; Mátéfi-Tempfli, M.; Mátéfi-Tempfli, Stefan

    2004-01-01

    The selective formation of diamond-like carbon coating by surface catalyst patterning was studied. DLC films was deposited using plasma enhanced chemical vapor deposition, filtered vacuum arc deposition, laser ablation, magnetron sputtering and ion-beam lithography methods. The DLC coatings were...... obtained by means of a single short and intensive carbon plasma deposition pulse. The deposited DLC coating was characterized by micro-Raman spectroscopy measurements. The DLC coating process gave rise to wide potential possibilities in micro-devices manufacturing productions....

  17. Advances in multi-spectral Diamond-Like Carbon (DLC) coatings

    Science.gov (United States)

    Keck, Jason; Karp, Christopher

    2014-05-01

    We discuss the development and applications of a new approach to Diamond-Like Carbon (DLC) coating that provides the durability of traditional DLC coatings, with the addition of significantly more transmission at visible wavelengths and greater transmission in the IR. We developed a deposition system design that incorporates multiple coating technologies, allowing for multiple material design approaches. This has enabled the manufacture of DLC coatings with improved extended spectral properties, suitable for applications in which the coating must withstand airborne particulate impacts, corrosive fluids, environmental extremes, and abrasive physical handling, while offering better than typical transmission in the visible or infrared wavelength regions, or both.

  18. Nanocomposite W-C : H diamond-like carbon coatings

    NARCIS (Netherlands)

    Strondl, Carl Gunnar Christian

    2007-01-01

    It has been demonstrated that the rotation speed of the substrate table and the gas flow rate of acetylene gas are important process parameters for determining the nano/micro-structure of W-C:H coatings. Either a homogeneous or a pronounced multilayer or a nanocomposite structure of the W-C:H

  19. Architectural design of diamond-like carbon coatings for long-lasting joint replacements.

    Science.gov (United States)

    Liu, Yujing; Zhao, Xiaoli; Zhang, Lai-Chang; Habibi, Daryoush; Xie, Zonghan

    2013-07-01

    Surface engineering through the application of super-hard, low-friction coatings as a potential approach for increasing the durability of metal-on-metal replacements is attracting significant attention. In this study innovative design strategies are proposed for the development of diamond-like-carbon (DLC) coatings against the damage caused by wear particles on the joint replacements. Finite element modeling is used to analyze stress distributions induced by wear particles of different sizes in the newly-designed coating in comparison to its conventional monolithic counterpart. The critical roles of architectural design in regulating stress concentrations and suppressing crack initiation within the coatings is elucidated. Notably, the introduction of multilayer structure with graded modulus is effective in modifying the stress field and reducing the magnitude and size of stress concentrations in the DLC diamond-like-carbon coatings. The new design is expected to greatly improve the load-carrying ability of surface coatings on prosthetic implants, in addition to the provision of damage tolerance through crack arrest. Copyright © 2013 Elsevier B.V. All rights reserved.

  20. Electrical conditioning of diamond-like carbon films for the formation of coated field emission cathodes

    Science.gov (United States)

    Semenenko, M.; Okrepka, G.; Yilmazoglu, O.; Hartnagel, H. L.; Pavlidis, D.

    2010-11-01

    Diamond-like carbon (DLC) films deposited on different substrates by plasma enhanced chemical vapour deposition were investigated. Bonding states and film quality were characterized by FT-IR spectroscopy. The influence of the power of plasma and the deposition time on the sp2/sp3 ratio as well as the concentration of CHn bonds was studied. The influence of sp2/sp3 ratio on the formation process of conducting channels in diamond-like carbon films as a result of electrical breakdown was determined. Reproducible increase of diamond-like carbon film conductivity, with initial sp2/sp3 ratio larger than 0.16, was observed after electrical breakdown.

  1. [The change of bacterial adhesion during deposition nitrogen-diamond like carbon coating on pure titanium].

    Science.gov (United States)

    Yin, Lu; Xiao, Yun

    2011-10-01

    The aim of this study was to observe the change of bacterial adhesion on pure titanium coated with nitrogen-diamond like carbon (N-DLC) films and to guide the clinical application. N-DLC was deposited on titanium using ion plating machine, TiN film, anodic oxide film and non-deposition were used as control, then made specimens adhering on the surface of resin denture base for 6 months. The adhesion of Saccharomyces albicans on the titanium surface was observed using scanning electron microscope, and the roughness was tested by roughness detector. The number of Saccharomyces albicans adhering on diamond-like carbon film was significantly less than on the other groups (P < 0.05), and the growth of bacterial cell was inhibited and in a poor state. The largest number of adhesion and cell strains grew well on anodic oxide film group and non-deposition control group. The change of surface roughness of N-DLC film was less than other group (P < 0.05). Pure titanium coated with N-DLC film reduced the adhesion of Saccharomyces albicans after clinical application, thereby reduced the risk of denture stomatitis.

  2. Experimental Study of Diamond Like Carbon (DLC) Coated Electrodes for Pulsed High Gradient Electron Gun

    CERN Document Server

    Paraliev, M; Ivkovic, S; Le Pimpec, F

    2010-01-01

    For the SwissFEL Free Electron Laser project at the Paul Scherrer Institute, a pulsed High Gradient (HG) electron gun was used to study low emittance electron sources. Different metals and surface treatments for the cathode and anode were studied for their HG suitability. Diamond Like Carbon (DLC) coatings are found to perform exceptionally well for vacuum gap insulation. A set of DLC coated electrodes with different coating parameters were tested for both vacuum breakdown and photo electron emission. Surface electric fields over 250MV/m (350 - 400kV, pulsed) were achieved without breakdown. From the same surface, it was possible to photo-emit an electron beam at gradients up to 150MV/m. The test setup and the experimental results are presented

  3. Characterization and development of diamond-like carbon coatings for storing ultracold neutrons

    CERN Document Server

    Grinten, M G D; Shiers, D; Baker, C A; Green, K; Harris, P G; Iaydjiev, P S; Ivanov, S N; Geltenbort, P

    1999-01-01

    In order to determine the suitability of diamond-like carbon (DLC) as a material for storing ultracold neutrons to use in neutron electric-dipole moment (EDM) experiments, a number of tests on DLC coatings have been performed. Thin DLC layers deposited on quartz and aluminium substrates by chemical vapour deposition have been characterised by neutron transmission, neutron reflectometry, electron microscopy and neutron and mercury storage and depolarisation lifetime measurements. Two types of DLC have been compared; DLC made by chemical vapour deposition from natural methane and DLC made by chemical vapour deposition from deuterated methane. With these samples we determined the density, hydrogen concentration and Fermi potential of the coatings. DLC coatings made from deuterated methane are now successfully being used in an experiment to measure the EDM of the neutron.

  4. Advances in PSII Deposited Diamond-Like Carbon Coatings for Use as a Barrier to Corrosion

    Energy Technology Data Exchange (ETDEWEB)

    Lillard, R.S.; Butt, D.P.; Baker, N.P.; Walter, K.C.; Nastasi, M.

    1998-10-01

    Plasma source ion implantation (PSII) is a non line of sight process for implanting complex shaped targets without the need for complex fixturing. The breakdown initiation of materials coated with diamond-like carbon (DLC) produced by PSII occurs at defects in the DLC which expose the underlying material. To summarize these findings, a galvanic couple is established between the coating and exposed material at the base of the defect. Pitting and oxidation of the base and metal leads to the development of mechanical stress in the coating and eventually spallation of the coating. This paper presents our current progress in attempting to mitigate the breakdown of these coatings by implanting the parent material prior to coating with DLC. Ideally one would like to implant the parent material with chromium or molybdenum which are known to improve corrosion resistance, however, the necessary organometallics needed to implant these materials with PSII are not yet available. Here we report on the effects of carbon, nitrogen, and boron implantation on the susceptibility of PSII-DLC coated mild steel to breakdown.

  5. Corrosion and Wear Behaviors of Cr-Doped Diamond-Like Carbon Coatings

    Science.gov (United States)

    Viswanathan, S.; Mohan, L.; Bera, Parthasarathi; Kumar, V. Praveen; Barshilia, Harish C.; Anandan, C.

    2017-08-01

    A combination of plasma-enhanced chemical vapor deposition and magnetron sputtering techniques has been employed to deposit chromium-doped diamond-like carbon (DLC) coatings on stainless steel, silicon and glass substrates. The concentrations of Cr in the coatings are varied by changing the parameters of the bipolar pulsed power supply and the argon/acetylene gas composition. The coatings have been studied for composition, morphology, surface nature, nanohardness, corrosion resistance and wear resistance properties. The changes in I D / I G ratio with Cr concentrations have been obtained from Raman spectroscopy studies. Ratio decreases with an increase in Cr concentration, and it has been found to increase at higher Cr concentration, indicating the disorder in the coating. Carbide is formed in Cr-doped DLC coatings as observed from XPS studies. There is a decrease in sp 3/ sp 2 ratios with an increase in Cr concentration, and it increases again at higher Cr concentration. Nanohardness studies show no clear dependence of hardness on Cr concentration. DLC coatings with lower Cr contents have demonstrated better corrosion resistance with better passive behavior in 3.5% NaCl solution, and corrosion potential is observed to move toward nobler (more positive) values. A low coefficient of friction (0.15) at different loads is observed from reciprocating wear studies. Lower wear volume is found at all loads on the Cr-doped DLC coatings. Wear mechanism changes from abrasive wear on the substrate to adhesive wear on the coating.

  6. Graphite-like and Diamond-like Carbon Coatings with Exceptional Tribological Properties

    Institute of Scientific and Technical Information of China (English)

    M.Jarratt; S.K.Field; S.Yang; D.G.Teer

    2004-01-01

    Two hard, carbon-based solid lubricant coatings, Graphit-iCTM and Dymon-iCTM, have been developed that offer considerable benefits for industry. Both of these new coatings have a high tribological load-bearing capacity, exceptional wear resistance and very low friction, even in dry or lubricant-starved contact. This is in contrast to many commercial diamond-like carbon, DLC coatings, which tend to be highly stressed and therefore brittle, making them unsuitable for high load bearing industrial applications. The development of the new solid lubricant coatings is described, and details of their tribological performance in dry, water and oil-lubricated environments are given. The structure of the coatings has been investigated and related to the tribological properties, and the mechanism for the low friction and wea rrates is discussed. The coatings have been used to successfully improve the lifetime and efficiency of many highly loaded mechanical parts, including automotive fuel injection components, gears, bearings, tappets (cam followers), gudgeon (wrist) pins, etc. They also offer benefits for tooling and are widely used in forming or machining of non-ferrous alloys, and extensively on dies and moulds. Other industrial application areas include electrical devices that require either high conductivity or insulation, optical devices requiring abrasion resistance and surgical tools and implants.

  7. Graphite-like and Diamond-like Carbon Coatings with Exceptional Tribological Properties

    Institute of Scientific and Technical Information of China (English)

    M. Jarratt; S. K. Field; S. Yang; D.G. Teer

    2004-01-01

    Two hard, carbon-based solid lubricant coatings, Graphit-iCTM and Dymon-iCTM, have been developed that offer considerable benefits for industry. Both of these new coatings have a high tribological load-bearing capacity,exceptional wear resistance and very low friction, even in dry or lubricant-starved contact. This is in contrast to many commercial diamond-like carbon, DLC coatings, which tend to be highly stressed and therefore brittle, making them unsuitable for high load bearing industrial applications. The development of the new solid lubricant coatings is described,and details of their tribological performance in dry, water and oil-lubricated environments are given. The structure of the coatings has been investigated and related to the tribological properties, and the mechanism for the low friction and wear rates is discussed. The coatings have been used to successfully improve the lifetime and efficiency of many highly loaded mechanical parts, including automotive fuel injection components, gears, bearings, tappets (cam followers), gudgeon (wrist)pins, etc. They also offer benefits for tooling and are widely used in forming or machining of non-ferrous alloys, and extensively on dies and moulds. Other industrial application areas include electrical devices that require either high conductivity or insulation, optical devices requiring abrasion resistance and surgical tools and implants.

  8. Influence of load on the dry frictional performance of alkyl acrylate copolymer elastomers coated with diamond-like carbon films

    NARCIS (Netherlands)

    Martinez, D. Martinez; Nohava, Jiri; De Hosson, J. Th. M.

    2015-01-01

    In this work, the influence of applied load on the frictional behavior of alkyl acrylate copolymer elastomers coated with diamond- like carbon films is studied at dry conditions. The performance of two coatings with very different microstructure (patched vs. continuous film) is compared with the unc

  9. Cavitation erosion resistance of diamond-like carbon coating on stainless steel

    Science.gov (United States)

    Cheng, Feng; Jiang, Shuyun

    2014-02-01

    Two diamond-like carbon (DLC) coatings are prepared on stainless steel 304 by cathodic arc plasma deposition technology at different substrate bias voltages and arc currents (-200 V/80 A, labeled DLC-1, and -100 V/60 A, labeled DLC-2). Cavitation tests are performed by using a rotating-disk test rig to explore the cavitation erosion resistance of the DLC coating. The mass losses, surface morphologies, chemical compositions and the phase constituents of the specimens after cavitation tests are examined by using digital balance, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD), respectively. The results indicate that the DLC-2 coatings can elongate the incubation period of stainless steel, leading to an excellent cavitation erosion resistance as compared to the untreated stainless steel specimens. After duration of 100 h cavitation test, serious damaged surfaces and plenty of scratches can be observed on the surfaces of the stainless steel specimens, while only a few grooves and tiny pits are observed on the DLC-2 coatings. It is concluded that, decreasing micro defects and increasing adhesion can reduce the delamination of DLC coating, and the erosion continues in the stainless steel substrate after DLC coating failure, and the eroded surface of the substrate is subjected to the combined action from cavitation erosion and slurry erosion.

  10. Cavitation erosion resistance of diamond-like carbon coating on stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Feng; Jiang, Shuyun, E-mail: jiangshy@seu.edu.cn

    2014-02-15

    Two diamond-like carbon (DLC) coatings are prepared on stainless steel 304 by cathodic arc plasma deposition technology at different substrate bias voltages and arc currents (−200 V/80 A, labeled DLC-1, and −100 V/60 A, labeled DLC-2). Cavitation tests are performed by using a rotating-disk test rig to explore the cavitation erosion resistance of the DLC coating. The mass losses, surface morphologies, chemical compositions and the phase constituents of the specimens after cavitation tests are examined by using digital balance, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD), respectively. The results indicate that the DLC-2 coatings can elongate the incubation period of stainless steel, leading to an excellent cavitation erosion resistance as compared to the untreated stainless steel specimens. After duration of 100 h cavitation test, serious damaged surfaces and plenty of scratches can be observed on the surfaces of the stainless steel specimens, while only a few grooves and tiny pits are observed on the DLC-2 coatings. It is concluded that, decreasing micro defects and increasing adhesion can reduce the delamination of DLC coating, and the erosion continues in the stainless steel substrate after DLC coating failure, and the eroded surface of the substrate is subjected to the combined action from cavitation erosion and slurry erosion.

  11. Velocity dependence of coefficient of friction of diamond like carbon coatings

    Science.gov (United States)

    Sharma, Neha; Kumar, Niranjan; Dash, S.; Tyagi, A. K.

    2012-06-01

    The velocity dependence of coefficient of friction (CoF) of hydrogen-free and hydrogenated Diamond Like Carbon (DLC) coatings was studied on sliding. In low velocity regime, CoF of hydrogen-free DLC was found to increase which may be linked to a thermally activated pre-mature breaking of the surface asperities. However, CoF of hydrogenated DLC was found to decrease due to formation of graphite like lubricious layer and sustainability of cross-linked network of H-bonded atoms. In high velocity regime, CoF of hydrogen free DLC increases marginally due to an inefficient transfer of thermal energy while that of hydrogenated DLC increases due to rapid formation and rupture of atomic bonds.

  12. Diamond-like carbon coatings for the protection of metallic artefacts: effect on the aesthetic appearance

    Science.gov (United States)

    Faraldi, Federica; Angelini, Emma; Caschera, Daniela; Mezzi, Alessio; Riccucci, Cristina; Caro, Tilde De

    2014-03-01

    Plasma-enhanced chemical vapour deposition (PECVD) is an environmentally friendly process used to deposit a variety of nano-structured coatings for the protection or the surface modification of metallic artefacts like the SiO2-like films that have been successfully tested on ancient silver, bronze and iron artefacts as barriers against aggressive agents. This paper deals with the preliminary results of a wider investigation aimed to the development of eco-sustainable coatings for the protection of Cu and Ag-based artefacts of archaeological and historic interest. Diamond-like carbon (DLC) coatings have been deposited by PECVD in different experimental conditions, in a capacitively coupled asymmetric plasma reactor, placing the substrates either on electrically powered electrode (cathodic mode) or grounded electrode (anodic mode) with and without hydrogen addition in the gas mixture. The final goal is to develop a coating with good protective effectiveness against aggressive atmospheres and contemporarily with negligible effects on the aesthetic appearance of the artefacts. The evaluation of possible colour changes of the surface patinas, due to coating process, was performed by optical microscopy and colorimetric measurements. Furthermore, to evaluate the reversibility of the thin DLC layer, an etching treatment in oxygen plasma has been successfully carried out and optimized. The chemical-physical characterization of the deposited DLC coatings was performed by means of the combined use of micro-Raman and XPS spectroscopies. The results show that the DLC films obtained in the anodic mode, may be proposed as a viable alternative to polymeric coatings for the protection of metallic ancient objects.

  13. Frictional and mechanical properties of diamond-like carbon-coated orthodontic brackets.

    Science.gov (United States)

    Muguruma, Takeshi; Iijima, Masahiro; Brantley, William A; Nakagaki, Susumu; Endo, Kazuhiko; Mizoguchi, Itaru

    2013-04-01

    This study investigated the effects of a diamond-like carbon (DLC) coating on frictional and mechanical properties of orthodontic brackets. DLC films were deposited on stainless steel brackets using the plasma-based ion implantation/deposition (PBIID) method under two different atmospheric conditions. As-received metal brackets served as the control. Two sizes of stainless steel archwires, 0.018 inch diameter and 0.017 × 0.025 inch cross-section dimensions, were used for measuring static and kinetic friction by drawing the archwires through the bracket slots, using a mechanical testing machine (n = 10). The DLC-coated brackets were observed with a scanning electron microscope (SEM). Values of hardness and elastic modulus were obtained by nanoindentation testing (n = 10). Friction forces were compared by one-way analysis of variance and the Scheffé test. The hardness and elastic modulus of the brackets were compared using Kruskal-Wallis and Mann-Whitney U-tests. SEM photomicrographs showed DLC layers on the bracket surfaces with thickness of approximately 5-7 μm. DLC-coated brackets deposited under condition 2 showed significantly less static frictional force for the stainless steel wire with 0.017 × 0.025 inch cross-section dimensions than as-received brackets and DLC-coated brackets deposited under condition 1, although both DLC-coated brackets showed significantly less kinetic frictional force than as-received brackets. The hardness of the DLC layers was much higher than that of the as-received bracket surfaces. In conclusion, the surfaces of metal brackets can be successfully modified by the PBIID method to create a DLC layer, and the DLC-coating process significantly reduces frictional forces.

  14. Wear and Friction Characteristics of AlN/Diamond-Like Carbon Hybrid Coatings on Aluminum Alloy

    Science.gov (United States)

    Nakamura, Masashi; Kubota, Sadayuki; Suzuki, Hideto; Haraguchi, Tadao

    2015-10-01

    The use of diamond-like carbon (DLC) coatings has the potential to greatly improve the wear resistance and friction of aluminum alloys, but practical application has so far been limited by poor adhesion due to large difference in hardness and elasticity between the two materials. This study investigates the deposition of DLC onto an Al-alloy using an intermediate AlN layer with a graded hardness to create a hybrid coating. By controlling the hardness of the AlN film, it was found that the wear life of the DLC film could be improved 80-fold compared to a DLC film deposited directly onto Al-alloy. Furthermore, it was demonstrated through finite element simulation that creating a hardness gradient in the AlN intermediate layer reduces the distribution of stress in the DLC film, while also increasing the force of adhesion between the DLC and AlN layers. Given that both the DLC and AlN films were deposited using the same unbalanced magnetron sputtering method, this process is considered to represent a simple and effective means of improving the wear resistance of Al-alloy components commonly used within the aerospace and automotive industries.

  15. Antithrombogenicity of Fluorinated Diamond-Like Carbon Films Coated Nano Porous Polyethersulfone (PES Membrane

    Directory of Open Access Journals (Sweden)

    Norihisa Miki

    2013-09-01

    Full Text Available A nano porous polyethersulfone (PES membrane is widely used for aspects of nanofiltration, such as purification, fractionation and dialysis. However, the low-blood-compatibility characteristic of PES membrane causes platelets and blood cells to stick to the surface of the membrane and degrades ions diffusion through membrane, which further limits its application for dialysis systems. In this study, we deposited the fluorinated-diamond-like-carbon (F-DLC onto the finger like structure layer of the PES membrane. By doing this, we have the F-DLC films coating the membrane surface without sacrificing the membrane permeability. In addition, we examined antithrombogenicity of the F-DLC/PES membranes using a microfluidic device, and experimentally found that F-DLC drastically reduced the amount of blood cells attached to the surface. We have also conducted long-term experiments for 24 days and the diffusion characteristics were found to be deteriorated due to fouling without any surface modification. On the other hand, the membranes coated by F-DLC film gave a consistent diffusion coefficient of ions transfer through a membrane porous. Therefore, F-DLC films can be a great candidate to improve the antithrombogenic characteristics of the membrane surfaces in hemodialysis systems.

  16. Porous Silicon Coated with Ultrathin Diamond-Like Carbon Film Cathodes

    Energy Technology Data Exchange (ETDEWEB)

    Evtukh, A A; Litovchenko, V G; Litvin, Y M; Fedin, D V; Rassamakin, Y V; Sarikov, A V; Chakhovskoi, A G; Felter, T E

    2001-04-01

    The main requirements to electron field emission cathodes are their efficiency, stability and uniformity. In this work we combined the properties of porous silicon layers and diamond-like carbon (DLC) film to obtain emission cathodes with improved parameters. The layered structures of porous silicon and DLC film were formed both on flat n-Si surface and silicon tips created by chemical etching. The conditions of the anodic and stain etching of silicon in HF containing solution under the illumination have been widely changed. The influence of thin ({le} 10nm) DLC film coating of the porous silicon layer on electron emission has been investigated. The parameters of emission efficiency such as field enhancement coefficient, effective emission areas and threshold voltages have been estimated from current-voltage dependencies to compare and characterize different layered structures. The improvement of the emission efficiency of silicon tip arrays with porous layers coated with thin DLC film has been observed. These silicon-based structures are promising for flat panel display applications.

  17. Dissolution effect and cytotoxicity of diamond-like carbon coatings on orthodontic archwires.

    Science.gov (United States)

    Kobayashi, Shinya; Ohgoe, Yasuharu; Ozeki, Kazuhide; Hirakuri, Kenji; Aoki, Hideki

    2007-12-01

    Nickel-titanium (NiTi) has been used for implants in orthodontics due to the unique properties such as shape memory effect and superelasticity. However, NiTi alloys are eroded in the oral cavity because they are immersed by saliva with enzymolysis. Their reactions lead corrosion and nickel release into the body. The higher concentrations of Ni release may generate harmful reactions. Ni release causes allergenic, toxic and carcinogenic reactions. It is well known that diamond-like carbon (DLC) films have excellent properties, such as extreme hardness, low friction coefficients, high wear resistance. In addition, DLC film has many other superior properties as a protective coating for biomedical applications such as biocompatibility and chemical inertness. Therefore, DLC film has received enormous attention as a biocompatible coating. In this study, DLC film coated NiTi orthodontic archwires to protect Ni release into the oral cavity. Each wire was immersed in physiological saline at the temperature 37 degrees C for 6 months. The release concentration of Ni ions was detected using microwave induced plasma mass spectrometry (MIP-MS) with the resolution of ppb level. The toxic effect of Ni release was studied the cell growth using squamous carcinoma cells. These cells were seeded in 24 well culture plates and materials were immersed in each well directly. The concentration of Ni ions in the solutions had been reduced one-sixth by DLC films when compared with non-coated wire. This study indicated that DLC films have the protective effect of the diffusion and the non-cytotoxicity in corrosive environment.

  18. Effect of composition on mechanical behaviour of diamond-like carbon coatings modified with titanium

    Energy Technology Data Exchange (ETDEWEB)

    Caschera, D., E-mail: daniela.caschera@ismn.cnr.i [Institute for the Study of Nanostructured Materials, ISMN - CNR, P.O. Box 10, 00015 Monterotondo Stazione (Italy); Federici, F.; Pandolfi, L.; Kaciulis, S. [Institute for the Study of Nanostructured Materials, ISMN - CNR, P.O. Box 10, 00015 Monterotondo Stazione (Italy); Sebastiani, M.; Bemporad, E. [Dip.to di Ingegneria Industriale e Meccanica, Universita di Roma Tre, Via Vasca Navale 84, 00146 Roma (Italy); Padeletti, G. [Institute for the Study of Nanostructured Materials, ISMN - CNR, P.O. Box 10, 00015 Monterotondo Stazione (Italy)

    2011-03-01

    In this study, diamond-like carbon (DLC) films modified with titanium were deposited by plasma decomposition of metallorganic precursor, titanium isopropoxide in CH{sub 4}/H{sub 2}/Ar gas atmosphere. The obtained films were composed of amorphous titanium oxide and nanocrystalline titanium carbide, embedded in an amorphous hydrogenated (a-C:H) matrix. The TiC/TiO{sub 2} ratio in the DLC matrix was found to be dependent on the deposition parameters. The dependence of the films chemical composition on gas mixture and substrate temperature was investigated by X-ray photoelectron spectroscopy, whereas the crystallinity of TiC nanoparticles and their dimension were evaluated by X-ray diffraction. The size of TiC crystallites varied from 10 to 35 nm, depending on the process parameters. The intrinsic hardness of 10-13 GPa, elastic modulus of 170-200 GPa and hardness-to-modulus ratio of obtained coatings were measured by the nanoindentation technique. Obtained results demonstrated a correlation of mechanical properties with the chemical composition and the ratio of amorphous/crystalline phases in the films. In particular, the formation of nanocrystalline TiC with atomic concentration not exceeding 10% and with grain size between 10 nm and 15 nm resulted in significantly enhanced mechanical properties of composite material in comparison with ordinary DLC films.

  19. Diamond like carbon coatings deposited by microwave plasma CVD: XPS and ellipsometric studies

    Indian Academy of Sciences (India)

    R M Dey; M Pandey; D Bhattacharyya; D S Patil; S K Kulkarni

    2007-12-01

    Diamond-like carbon (DLC) films were deposited by microwave assisted chemical vapour deposition system using d.c. bias voltage ranging from –100 V to –300 V. These films were characterized by X-ray photoelectron spectroscopy (XPS) and spectroscopic ellipsometry techniques for estimating 3/2 ratio. The 3/2 ratio obtained by XPS is found to have an opposite trend to that obtained by spectroscopic ellipsometry. These results are explained using sub-plantation picture of DLC growth. Our results clearly indicate that the film is composed of two different layers, having entirely different properties in terms of void percentage and 3/2 ratio. The upper layer is relatively thinner as compared to the bottom layer.

  20. Development of a radio frequency atmospheric pressure plasma jet for diamond-like carbon coatings on stainless steel substrates

    Science.gov (United States)

    Sohbatzadeh, F.; Samadi, O.; Siadati, S. N.; Etaati, G. R.; Asadi, E.; Safari, R.

    2016-10-01

    In this paper, an atmospheric pressure plasma jet with capacitively coupled radio frequency discharge was developed for diamond-like carbon (DLC) coatings on stainless steel substrates. The plasma jet was generated by argon-methane mixture and its physical parameters were investigated. Relation between the plasma jet length and width of the powered electrode was discussed. Optical and electrical characteristics were studied by optical emission spectroscopy, voltage and current probes, respectively. The evolutions of various species like ArI, C2 and CH along the jet axis were investigated. Electron temperature and density were estimated by Boltzmann plot method and Saha-Boltzmann equation, respectively. Finally, a diamond-like carbon coating was deposited on stainless steel-304 substrates by the atmospheric pressure radio frequency plasma jet in ambient air. Raman spectroscopy, scanning electron microscopy (SEM), atomic force microscopy and Vickers hardness test were used to study the deposited films. The length of the jet was increased by increasing the width of the powered electrode. The estimated electron temperature and density were 1.43 eV and 1.39 × 1015 cm-3, respectively. Averaged Vicker's hardness of the coated sample was three times greater than that of the substrate. The SEM images of the deposited thin films revealed a 4.5 μm DLC coated for 20 min.

  1. Reduction in static friction by deposition of a homogeneous diamond-like carbon (DLC) coating on orthodontic brackets.

    Science.gov (United States)

    Akaike, Shun; Hayakawa, Tohru; Kobayashi, Daishiro; Aono, Yuko; Hirata, Atsushi; Hiratsuka, Masanori; Nakamura, Yoshiki

    2015-01-01

    In orthodontics, a reduction in static friction between the brackets and wire is important to enable easy tooth movement. The aim of this study was to examine the effects of a homogeneous diamond-like carbon (DLC) coating on the whole surfaces of slots in stainless steel orthodontic brackets on reducing the static friction between the brackets and the wire. The DLC coating was characterized using Raman spectroscopy, surface roughness and contact angle measurements, and SEM observations. Rectangular stainless steel and titanium-molybdenum alloy wires with two different sizes were employed, and the static friction between the brackets and wire was measured under dry and wet conditions. The DLC coating had a thickness of approximately 1.0 μm and an amorphous structure was identified. The results indicated that the DLC coating always led to a reduction in static friction.

  2. Further improvement of mechanical and tribological properties of Cr-doped diamond-like carbon nanocomposite coatings by N codoping

    Science.gov (United States)

    Zou, Changwei; Xie, Wei; Tang, Xiaoshan

    2016-11-01

    In this study, the effects of nitrogen codoping on the microstructure and mechanical properties of Cr-doped diamond-like carbon (DLC) nanocomposite coatings were investigated in detail. Compared with undoped DLC coatings, the Cr-DLC and N/Cr-DLC coatings showed higher root-mean-square (RMS) roughness values. However, from the X-ray photoelectron spectroscopy (XPS) and Raman results, the fraction of sp2 carbon bonds of N/Cr-DLC coatings increased with increasing N content, which indicated the graphitization of the coatings. The hardness and elastic modulus of N/Cr-DLC coatings with 1.8 at. % N were about 26.8 and 218 GPa, respectively. The observed hardness increase with N codoping was attributed to the incorporation of N in the C network along with the formation of CrC(N) nanoparticles, as confirmed from the transmission electron microscopy (TEM) results. The internal stress markedly decreased from 0.93 to 0.32 GPa as the N content increased from 0 to 10.3 at. %. Furthermore, N doping significantly improved the high-temperature dry friction behavior of DLC coatings. The friction coefficient of N/Cr-DLC coatings with 8.0 and 10.3 at. % N was kept at about 0.2 during the overall sliding test at 500 °C. These results showed that appropriate N doping could promote the mechanical and tribological properties of Cr-DLC nanocomposite coatings.

  3. Nanopatterning on silicon surface using atomic force microscopy with diamond-like carbon (DLC-coated Si probe

    Directory of Open Access Journals (Sweden)

    Zhou Jingfang

    2011-01-01

    Full Text Available Abstract Atomic force microscope (AFM equipped with diamond-like carbon (DLC-coated Si probe has been used for scratch nanolithography on Si surfaces. The effect of scratch direction, applied tip force, scratch speed, and number of scratches on the size of the scratched geometry has been investigated. The size of the groove differs with scratch direction, which increases with the applied tip force and number of scratches but decreases slightly with scratch speed. Complex nanostructures of arrays of parallel lines and square arrays are further fabricated uniformly and precisely on Si substrates at relatively high scratch speed. DLC-coated Si probe has the potential to be an alternative in AFM-based scratch nanofabrication on hard surfaces.

  4. Transition Metal Ion Implantation into Diamond-Like Carbon Coatings: Development of a Base Material for Gas Sensing Applications

    Directory of Open Access Journals (Sweden)

    Andreas Markwitz

    2015-01-01

    Full Text Available Micrometre thick diamond-like carbon (DLC coatings produced by direct ion deposition were implanted with 30 keV Ar+ and transition metal ions in the lower percentage (<10 at.% range. Theoretical calculations showed that the ions are implanted just beneath the surface, which was confirmed with RBS measurements. Atomic force microscope scans revealed that the surface roughness increases when implanted with Ar+ and Cu+ ions, whereas a smoothing of the surface from 5.2 to 2.7 nm and a grain size reduction from 175 to 93 nm are measured for Ag+ implanted coatings with a fluence of 1.24×1016 at. cm−2. Calculated hydrogen and carbon depth profiles showed surprisingly significant changes in concentrations in the near-surface region of the DLC coatings, particularly when implanted with Ag+ ions. Hydrogen accumulates up to 32 at.% and the minimum of the carbon distribution is shifted towards the surface which may be the cause of the surface smoothing effect. The ion implantations caused an increase in electrical conductivity of the DLC coatings, which is important for the development of solid-state gas sensors based on DLC coatings.

  5. Diamond-like carbon coatings enhance the hardness and resilience of bearing surfaces for use in joint arthroplasty.

    Science.gov (United States)

    Roy, M E; Whiteside, L A; Xu, J; Katerberg, B J

    2010-04-01

    The purpose of this study was to evaluate the potential of a hard diamond-like carbon (DLC) coating to enhance the hardness and resilience of a bearing surface in joint replacement. The greater hardness of a magnesium-stabilized zirconium (Mg-PSZ) substrate was expected to provide a harder coating-substrate composite microhardness than the cobalt-chromium alloy (CoCr) also used in arthroplasty. Three femoral heads of each type (CoCr, Mg-PSZ, DLC-CoCr and DLC-Mg-PSZ) were examined. Baseline (non-coated) and composite coating/substrate hardness was measured by Vickers microhardness tests, while nanoindentation tests measured the hardness and elastic modulus of the DLC coating independent of the Mg-PSZ and CoCr substrates. Non-coated Mg-PSZ heads were considerably harder than non-coated CoCr heads, while DLC coating greatly increased the microhardness of the CoCr and Mg-PSZ substrates. On the nanoscale the non-coated heads were much harder than on the microscale, with CoCr exhibiting twice as much plastic deformation as Mg-PSZ. The mechanical properties of the DLC coatings were not significantly different for both the CoCr and Mg-PSZ substrates, producing similar moduli of resilience and plastic resistance ratios. DLC coatings greatly increased hardness on both the micro and nano levels and significantly improved resilience and resistance to plastic deformation compared with non-coated heads. Because Mg-PSZ allows less plastic deformation than CoCr and provides a greater composite microhardness, DLC-Mg-PSZ will likely be more durable for use as a bearing surface in vivo.

  6. [Influence of deposition time on chromatics during nitrogen-doped diamond like carbon coating on pure titanium].

    Science.gov (United States)

    Yin, Lu; Yao, Jiang-wu; Xu, De-wen

    2010-10-01

    The aim of this study was to observed the influence of deposition time on chromatics during nitrogen-doped diamond like carbon coating (N-DLC) on pure titanium by multi impulse are plasma plating machine. Applying multi impulse are plasma plating machine to produce TiN coatings on pure titanium in nitrogen atmosphere, then filming with nitrogen-doped DLC on TiN in methane (10-80 min in every 5 min). The colors of N-DLC were evaluated in the CIE1976 L*a*b* uniform color scale and Mussell notation. The surface morphology of every specimen was analyzed using scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). When changing the time of N-DLC coating deposition, N-DLC surface showed different color. Golden yellow was presented when deposition time was 30 min. SEM showed that crystallization was found in N-DLC coatings, the structure changed from stable to clutter by varying the deposition time. The chromatics of N-DLC coatings on pure titanium could get golden yellow when deposition time was 30 min, then the crystallized structure was stable.

  7. Tribological behaviors of diamond-like carbon coatings on plasma nitrided steel using three BN-containing lubricants

    Energy Technology Data Exchange (ETDEWEB)

    Jia Zhengfeng [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, 18 Tianshui Middle Road, Lanzhou 73000 (China); College of Materials Science and Engineering, Liaocheng University, Liaocheng 252059 (China); Graduate School of the Chinese Academy of Sciences, Beijing 10039 (China); Wang Peng [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, 18 Tianshui Middle Road, Lanzhou 73000 (China); Xia Yanqiu, E-mail: xiayanqiu@yahoo.com [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, 18 Tianshui Middle Road, Lanzhou 73000 (China); Zhang Haobo; Pang Xianjuan [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, 18 Tianshui Middle Road, Lanzhou 73000 (China); Graduate School of the Chinese Academy of Sciences, Beijing 10039 (China); Li Bin [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, 18 Tianshui Middle Road, Lanzhou 73000 (China)

    2009-04-15

    In this work, diamond-like carbon (DLC) coatings were deposited on plasma nitrided AISI 1045 steel by magnetron sputtering. Three BN-containing additives and molybdenum dithiocarbamate (MoDTC) were added to poly-alpha-olefin (PAO) as additives. The additive content (mass fraction) in PAO was fixed at 0.5 wt%. The friction and wear characters of DLC coatings on nitrided steel discs sliding against AISI 52100 steel balls were tested under the lubricated conditions. It was found that borate esters have a higher load carrying capacity and much better anti-wear and friction-reducing ability than that of MoDTC. X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) were employed to explore the properties of the worn surface and the mechanism of friction and wear. According to the XPS analysis, the adsorbed organic N-containing compounds and BN are, possibly, the primary reason for the novel borate esters to possess a relatively constant coefficient of friction and lower wear rate. On the other hand, possibly, the MoDTC molecules break down during sliding and produce many Mo-oxides, and then the Mo-oxides destroy the DLC coating because of its sharp edge crystalline solid structure. After destroying the DLC coating, the MoDTC react with metals and form MoS{sub 2} tribofilm, and decrease coefficient of friction of rubbing pairs.

  8. Wear resistance of thick diamond like carbon coatings against polymeric materials used in single screw plasticizing technology

    Science.gov (United States)

    Zitzenbacher, G.; Liu, K.; Forsich, C.; Heim, D.

    2015-05-01

    Wear on the screw and barrel surface accompany polymer single screw plasticizing technology from the beginning. In general, wear on screws can be reduced by using nitrided steel surfaces, fused armour alloys on the screw flights and coatings. However, DLC-coatings (Diamond Like Carbon) comprise a number of interesting properties such as a high hardness, a low coefficient of friction and an excellent corrosion resistance due to their amorphous structure. The wear resistance of about 50 µm thick DLC-coatings against polyamide 6.6, polybutylene terephthalate and polypropylene is investigated in this paper. The tribology in the solids conveying zone of a single screw extruder until the beginning of melting is evaluated using a pin on disc tribometer and a so called screw tribometer. The polymeric pins are pressed against coated metal samples using the pin on disc tribometer and the tests are carried out at a defined normal force and sliding velocity. The screw tribometer is used to perform tribological experiments between polymer pellets and rotating coated metal shafts simulating the extruder screw. Long term experiments were performed to evaluate the wear resistance of the DLC-coating. A reduction of the coefficient of friction can be observed after a frictional distance of about 20 kilometers using glass fibre reinforced polymeric materials. This reduction is independent on the polymer and accompanied by a black layer on the wear surface of the polymeric pins. The DLC-coated metal samples show an up to 16 µm deep wear track after the 100 kilometer test period against the glass fiber filled materials only.

  9. On the performances and wear of WC-diamond like carbon coated tools in drilling of CFRP/Titanium stacks

    Science.gov (United States)

    Boccarusso, L.; Durante, M.; Impero, F.; Minutolo, F. Memola Capece; Scherillo, F.; Squillace, A.

    2016-10-01

    The use of hybrid structures made of CFRP and titanium alloys is growing more and more in the last years in the aerospace industry due to the high strength to weight ratio. Because of their very different characteristics, the mechanical fastening represent the most effective joining technique for these materials. As a consequence, drilling process plays a key role in the assembly. The one shot drilling, i.e. the contemporary drilling of the stack of the two materials, seems to be the best option both in terms of time saving and assembly accuracy. Nevertheless, due to the considerable different machinability of fiber reinforced plastics and metallic materials, the one shot drilling is a critical process both for the holes quality and for the tools wear. This research was carried out to study the effectiveness of new generation tools in the drilling of CFRP/Titanium stacks. The tools are made of sintered grains of tungsten carbide (WC) in a binder of cobalt and coated with Diamond like carbon (DLC), and are characterized by a patented geometry; they mainly differ in parent WC grain size and binder percentage. Both the cutting forces and the wear phenomena were accurately investigated and the results were analyzed as a function of number of holes and their quality. The results show a clear increase of the cutting forces with the number of holes for all the used drilling tools. Moreover, abrasive wear phenomena that affect initially the tools coating layer were observed.

  10. Molecular dynamics simulations on the frictional behavior of a perfluoropolyether film sandwiched between diamond-like-carbon coatings.

    Science.gov (United States)

    Dai, L; Sorkin, V; Sha, Z D; Pei, Q X; Branicio, P S; Zhang, Y W

    2014-02-18

    We perform molecular dynamics simulations to investigate the nanoscale frictional behavior of a perfluoropolyether (PFPE) film sandwiched between two diamond-like-carbon (DLC) coatings. We show that the PFPE films behave like a solid and can perform either a motion-station movement or a continuous motion with fluctuating velocities. The former movement is caused by the alternating stick and slip at the two individual interfaces, while the latter is due to the dynamic sliding motions simultaneously occurring at both interfaces. We reveal that these motion characteristics are governed by the competition between the two interfacial adhesion energies, which are strongly affected by the thermal vibrations and interface roughness fluctuations. We also find that the Amonton's law modified by incorporating the adhesion effect can be used to describe the mean friction traction vs normal pressure relation, but large fluctuations are present at low contact pressures. The magnitude of atomic level friction forces at the interface is found to be highly nonuniform. The directions of atomic level friction forces can even be opposite. With increasing the normal pressure, the nonuniformity of atomic level friction forces decreases first and then increases again. This change can be explained by the concurrent effects from the large difference in material stiffness and the changes in surface roughness under normal pressure. The present work reveals interesting insights into the sliding mechanisms in sandwiched structures and provides useful guidelines for the design of nanoscale lubricant systems.

  11. Diamond-like carbon and ceramic materials as protective coatings grown by pulsed laser deposition

    OpenAIRE

    Perera Mercado, Yibran Argenis

    2004-01-01

    A rather large number of nitride, carbide, and oxide thin films are used as hard and wear-resistant coatings, for optical, corrosive, and refractory applications that are of crucial importance. Additional requirements place even more stringent conditions on the deposition processes. The properties of coatings deposited by pulsed laser deposition are determined by the deposition parameters, the composition of the PLD plasma and its ionization states, the substrate conditions, etc.. In this way...

  12. The Structure and Characteristics of Tribological Systems with Diamond Like Carbon Coatings under Ionic Liquid Lubrication Conditions

    Directory of Open Access Journals (Sweden)

    Madej M.

    2016-06-01

    Full Text Available The results from the tests on tribological a-C:H diamond coatings deposited by PACVD (plasma assisted chemical vapour deposition on 100Cr6 steel components are presented in this work. Mechanical properties - nanohardness and Young’s modulus - were assessed by instrumented indentation. Tribological tests were conducted with T-01M tester in a ball-on-disc test under dry and boundary friction conditions. Selected ionic liquids - synthetic new generation lubricants - were used for lubrication. The results from the experiments indicate that diamond-like coatings improved tribological characteristics of the friction pairs tested, with the ionic liquids intensifying this effect.

  13. Diamond or Diamond Like Carbon Coated Chemical Sensors and a Method of Making Same

    Science.gov (United States)

    1997-04-30

    halogen lamp ; an optical waveguide such as a fiber optic or a planar waveguide substrate; a chemoselective or bioselective film deposited en the...Patent Application Serial Number: Navy Case Number: 77,845 is then exposed to a pulsed laser, usually a Kr-F excimer laser with a wavelength of...located abtut 4 centimeters from the graphite target. Other suitable laser sources for depositing the protective coating include argon fluorine at 193 nm

  14. In vitro evaluation of diamond-like carbon coatings with a Si/SiC {sub x} interlayer on surgical NiTi alloy

    Energy Technology Data Exchange (ETDEWEB)

    Liu, C.L. [Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong (China); State Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Dalian University of Technology, Dalian 116024 (China); Chu, Paul K. [Department of Physics and Materials Science, City University of Hong Kong, Tat Chee Avenue, Kowloon, Hong Kong (China)]. E-mail: paul.chu@cityu.edu.hk; Yang, D.Z. [State Key Laboratory of Materials Modification by Laser, Ion and Electron Beams, Dalian University of Technology, Dalian 116024 (China)

    2007-04-15

    Diamond-like carbon (DLC) coatings were produced with a Si/SiC {sub x} interlayer by a hybrid plasma immersion ion implantation and deposition process to improve the adhesion between the carbon layer and surgical NiTi alloy substrate. The structure, mechanical properties, corrosion resistance and biocompatibility of the coatings were evaluated in vitro by Raman spectroscopy, pin-on-disk tests, potentiodynamic polarization tests and simulated fluid immersion tests. The DLC coatings with a Si/SiC {sub x} interlayer of a suitable thickness have better adhesion, lower friction coefficients and enhanced corrosion resistance. In the simulated body fluid tests, the coatings exhibit effective corrosion protection and good biocompatibility as indicated by PC12 cell cultures. DLC films fabricated on a Si/SiC {sub x} interlayer have high potential as protective coatings for biomedical NiTi materials.

  15. Tensile test of a silicon microstructure fully coated with submicrometer-thick diamond like carbon film using plasma enhanced chemical vapor deposition method

    Science.gov (United States)

    Zhang, Wenlei; Uesugi, Akio; Hirai, Yoshikazu; Tsuchiya, Toshiyuki; Tabata, Osamu

    2017-06-01

    This paper reports the tensile properties of single-crystal silicon (SCS) microstructures fully coated with sub-micrometer thick diamond like carbon (DLC) film using plasma enhanced chemical vapor deposition (PECVD). To minimize the deformations or damages caused by non-uniform coating of DLC, which has high compression residual stress, released SCS specimens with the dimensions of 120 µm long, 4 µm wide, and 5 µm thick were coated from the top and bottom side simultaneously. The thickness of DLC coating is around 150 nm and three different bias voltages were used for deposition. The tensile strength improved from 13.4 to 53.5% with the increasing of negative bias voltage. In addition, the deviation in strength also reduced significantly compared to bare SCS sample.

  16. Ti-doped hydrogenated diamond like carbon coating deposited by hybrid physical vapor deposition and plasma enhanced chemical vapor deposition

    Science.gov (United States)

    Lee, Na Rae; Sle Jun, Yee; Moon, Kyoung Il; Sunyong Lee, Caroline

    2017-03-01

    Diamond-like carbon films containing titanium and hydrogen (Ti-doped DLC:H) were synthesized using a hybrid technique based on physical vapor deposition (PVD) and plasma enhanced chemical vapor deposition (PECVD). The film was deposited under a mixture of argon (Ar) and acetylene gas (C2H2). The amount of Ti in the Ti-doped DLC:H film was controlled by varying the DC power of the Ti sputtering target ranging from 0 to 240 W. The composition, microstructure, mechanical and chemical properties of Ti-doped DLC:H films with varying Ti concentrations, were investigated using Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), nano indentation, a ball-on-disk tribometer, a four-point probe system and dynamic anodic testing. As a result, the optimum composition of Ti in Ti-doped DLC:H film using our hybrid method was found to be a Ti content of 18 at. %, having superior electrical conductivity and high corrosion resistance, suitable for bipolar plates. Its hardness value was measured to be 25.6 GPa with a low friction factor.

  17. The Effect of Bias Voltage and Gas Pressure on the Structure, Adhesion and Wear Behavior of Diamond Like Carbon (DLC Coatings With Si Interlayers

    Directory of Open Access Journals (Sweden)

    Liam Ward

    2014-04-01

    Full Text Available In this study diamond like carbon (DLC coatings with Si interlayers were deposited on 316L stainless steel with varying gas pressure and substrate bias voltage using plasma enhanced chemical vapor deposition (PECVD technology. Coating and interlayer thickness values were determined using X-ray photoelectron spectroscopy (XPS which also revealed the presence of a gradient layer at the coating substrate interface. Coatings were evaluated in terms of the hardness, elastic modulus, wear behavior and adhesion. Deposition rate generally increased with increasing bias voltage and increasing gas pressure. At low working gas pressures, hardness and modulus of elasticity increased with increasing bias voltage. Reduced hardness and modulus of elasticity were observed at higher gas pressures. Increased adhesion was generally observed at lower bias voltages and higher gas pressures. All DLC coatings significantly improved the overall wear resistance of the base material. Lower wear rates were observed for coatings deposited with lower bias voltages. For coatings that showed wear tracks considerably deeper than the coating thickness but without spallation, the wear behavior was largely attributed to deformation of both the coating and substrate with some cracks at the wear track edges. This suggests that coatings deposited under certain conditions can exhibit ultra high flexible properties.

  18. XPS, XRD and laser raman analysis of surface modified of 6150 steel substrates for the deposition of thick and adherent diamond-like carbon coatings

    Directory of Open Access Journals (Sweden)

    William de Melo Silva

    2013-06-01

    Full Text Available Although the 6150 steel has an excellent fatigue and impact resistance, it is unsuitable to operate it when the corrosion is a limited factor. We propose here a sequence of steel pre-treatment by carburizing, carbonitriding and nitriding in order to improve the poor adhesion between Diamond Like-Carbon coatings on steel. This sequence is our attempt to reduce the difference between the coefficients of thermal expansion of steel and DLC through the graded interface. This work demonstrates the quantitative analysis of the molecules present at surface using X-ray photoelectron spectroscopy. The crystallographic structures are investigated by X-ray diffraction which shows the formation of carbides and nitride phases. Raman spectroscopy reveals the carburizing surface characteristics where DLC coating is nucleated and grown at the substrate. At the end of the analysis it is possible to verify which molecules and phases are formed on the steel surface interface after each step of pre-treatment.

  19. XPS, XRD and laser Raman analysis of surface modified of 6150 steel substrates for the deposition of thick and adherent diamond-like carbon coatings

    Energy Technology Data Exchange (ETDEWEB)

    Silva, William de Melo; Carneiro, Jose Rubens Goncalves, E-mail: williammelosilva@gmail.com [Pontificia Universidade Catolica de Minas Gerais (PUC-MG), Belo Horizonte (Brazil). Dept. de Engenharia Mecanica; Trava-Airoldi, Vladimir Jesus [Associate Laboratory of Sensors and Materials, National Institute for Space Research, Sao Jose dos Campos, SP (Brazil)

    2013-11-01

    Although the 6150 steel has an excellent fatigue and impact resistance, it is unsuitable to operate it when the corrosion is a limited factor. We propose here a sequence of steel pre-treatment by carburizing, carbonitriding and nitriding in order to improve the poor adhesion between Diamond Like-Carbon coatings on steel. This sequence is our attempt to reduce the difference between the coefficients of thermal expansion of steel and DLC through the graded interface. This work demonstrates the quantitative analysis of the molecules present at surface using X-ray photoelectron spectroscopy. The crystallographic structures are investigated by X-ray diffraction which shows the formation of carbides and nitride phases. Raman spectroscopy reveals the carburizing surface characteristics where DLC coating is nucleated and grown at the substrate. At the end of the analysis it is possible to verify which molecules and phases are formed on the steel surface interface after each step of pre-treatment. (author)

  20. Graphene diamond-like carbon films heterostructure

    Science.gov (United States)

    Zhao, Fang; Afandi, Abdulkareem; Jackman, Richard B.

    2015-03-01

    A limitation to the potential use of graphene as an electronic material is the lack of control over the 2D materials properties once it is deposited on a supporting substrate. Here, the use of Diamond-like Carbon (DLC) interlayers between the substrate and the graphene is shown to offer the prospect of overcoming this problem. The DLC films used here, more properly known as a-C:H with ˜25% hydrogen content, have been terminated with N or F moieties prior to graphene deposition. It is found that nitrogen terminations lead to an optical band gap shrinkage in the DLC, whilst fluorine groups reduce the DLC's surface energy. CVD monolayer graphene subsequently transferred to DLC, N terminated DLC, and F terminated DLC has then been studied with AFM, Raman and XPS analysis, and correlated with Hall effect measurements that give an insight into the heterostructures electrical properties. The results show that different terminations strongly affect the electronic properties of the graphene heterostructures. G-F-DLC samples were p-type and displayed considerably higher mobility than the other heterostructures, whilst G-N-DLC samples supported higher carrier densities, being almost metallic in character. Since it would be possible to locally pattern the distribution of these differing surface terminations, this work offers the prospect for 2D lateral control of the electronic properties of graphene layers for device applications.

  1. Graphene diamond-like carbon films heterostructure

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Fang; Afandi, Abdulkareem; Jackman, Richard B., E-mail: r.jackman@ucl.ac.uk [London Centre for Nanotechnology, Electronic and Electrical Engineering Department, University College London, 17-19 Gordon Street, London WC1H 0AH (United Kingdom)

    2015-03-09

    A limitation to the potential use of graphene as an electronic material is the lack of control over the 2D materials properties once it is deposited on a supporting substrate. Here, the use of Diamond-like Carbon (DLC) interlayers between the substrate and the graphene is shown to offer the prospect of overcoming this problem. The DLC films used here, more properly known as a-C:H with ∼25% hydrogen content, have been terminated with N or F moieties prior to graphene deposition. It is found that nitrogen terminations lead to an optical band gap shrinkage in the DLC, whilst fluorine groups reduce the DLC's surface energy. CVD monolayer graphene subsequently transferred to DLC, N terminated DLC, and F terminated DLC has then been studied with AFM, Raman and XPS analysis, and correlated with Hall effect measurements that give an insight into the heterostructures electrical properties. The results show that different terminations strongly affect the electronic properties of the graphene heterostructures. G-F-DLC samples were p-type and displayed considerably higher mobility than the other heterostructures, whilst G-N-DLC samples supported higher carrier densities, being almost metallic in character. Since it would be possible to locally pattern the distribution of these differing surface terminations, this work offers the prospect for 2D lateral control of the electronic properties of graphene layers for device applications.

  2. Formation of conducting nanochannels in diamond-like carbon films

    Science.gov (United States)

    Evtukh, A.; Litovchenko, V.; Semenenko, M.; Yilmazoglu, O.; Mutamba, K.; Hartnagel, H. L.; Pavlidis, D.

    2006-09-01

    A sharp increase of the emission current at high electric fields and a decrease of the threshold voltage after pre-breakdown conditioning of diamond-like carbon (DLC) films have been measured. This effect was observed for DLC-coated silicon tips and GaAs wedges. During electron field emission (EFE) at high electric fields the energy barriers caused by an sp3 phase between sp2 inclusions can be broken, resulting in the formation of conducting nanochannels between the semiconductor-DLC interface and the surface of the DLC film. At high current densities and the resulting local heating, the diamond-like sp3 phase transforms into a conducting graphite-like sp2 phase. As a result an electrical conducting nanostructured channel is formed in the DLC film. The diameter of the conducting nanochannel was estimated from the reduced threshold voltage after pre-breakdown conditioning to be in the range of 5-25 nm. The presence of this nanochannel in an insulating matrix leads to a local enhancement of the electric field and a reduced threshold voltage for EFE. Based on the observed features an efficient method of conducting nanochannel matrix formation in flat DLC films for improved EFE efficiency is proposed. It mainly uses a silicon tip array as an upper electrode in contact with the DLC film. The formation of nanochannels starts at the interface between the tips and the DLC film. This opens new possibilities of aligned and high-density conducting channel formation.

  3. Crack formation mechanisms during micro and macro indentation of diamond-like carbon coatings on elastic-plastic substrates

    DEFF Research Database (Denmark)

    Thomsen, N.B.; Fischer-Cripps, A.C.; Swain, M.V.

    1998-01-01

    In the present study crack formation is investigated on both micro and macro scale using spherical indenter tips. in particular, systems consisting of elastic coatings that are well adhered to elastic-plastic substrates are studied. Depth sensing indentation is used on the micro scale and Rockwell...... indentation on the macro scale. The predominant driving force for coating failure and crack formation during indentation is plastic deformation of the underlying substrate. The aim is to relate the mechanisms creating both delamination and cohesive cracking on both scales with fracture mechanical models...

  4. Development of Diamond-like Carbon Fibre Wheel

    Institute of Scientific and Technical Information of China (English)

    魏源迁; 山口勝美; 洞口巌; 竹内雅之

    2004-01-01

    A unique diamond-like carbon (DLC) grinding wheel was developed, in which the DLC fibres were made by rolling Al sheets coated with DLC films and aligned normally to the grinding wheel surface by laminating Al sheets together with DLC fibres. In this paper, the formation process of DLC fibres and the fabrication process of a DLC fibre wheel were investigated. Many grinding experiments were also carried out on a precision NC plane milling machine using a newly developed DLC wheel. Grinding of specimens of silicon wafers, optical glasses, quartz, granites and hardened die steel SKD11 demonstrated the capabilities of nanometer surface finish. A smooth surface with a roughness value of Ra2.5nm (Ry26nm) was achieved.

  5. Prospective multi-center registry to evaluate efficacy and safety of the newly developed diamond-like carbon-coated cobalt-chromium coronary stent system.

    Science.gov (United States)

    Ando, Kenji; Ishii, Katsuhisa; Tada, Eiji; Kataoka, Kazuaki; Hirohata, Atsushi; Goto, Kenji; Kobayashi, Katsuyuki; Tsutsui, Hiroshi; Nakahama, Makoto; Nakashima, Hitoshi; Uchikawa, Shinichiroh; Kanda, Junji; Yasuda, Satoshi; Yajima, Junji; Kitabayashi, Hiroshi; Sakurai, Shumpei; Nakanishi, Keita; Inoue, Naoto; Noike, Hirofumi; Hasebe, Terumitsu; Sato, Tetsuya; Yamasaki, Masao; Kimura, Takeshi

    2017-07-01

    The purpose of this multi-center, non-randomized, and open-label clinical trial was to determine the non-inferiority of diamond-like carbon (DLC)-coated cobalt-chromium coronary stent, the MOMO DLC coronary stent, relative to commercially available bare-metal stents (MULTI-LINK VISION(®)). Nineteen centers in Japan participated. The study cohort consisted of 99 patients from 19 Japanese centers with single or double native coronary vessel disease with de novo and restenosis lesions who met the study eligibility criteria. This cohort formed the safety analysis set. The efficacy analysis set consisted of 98 patients (one case was excluded for violating the eligibility criteria). The primary endpoint was target vessel failure (TVF) rate at 9 months after stent placement. Of the 98 efficacy analysis set patients, TVF occurred in 11 patients (11.2 %, 95 % confidence interval 5.7-19.2 %) at 9 months after the index stent implantation. The upper 95 % confidence interval for TVF of the study stent was lower than that previously reported for the commercially available MULTI-LINK VISION(®) (19.6 %), demonstrating non-inferiority of the study stent to MULTI-LINK VISION(®). All the TVF cases were related to target vascular revascularization. None of the cases developed in-stent thrombosis or myocardial infarction. The average in-stent late loss and binary restenosis rate at the 6-month follow-up angiography were 0.69 mm and 10.5 %, respectively, which are lower than the reported values for commercially available bare-metal stents. In conclusion, the current pivotal clinical study evaluating the new MOMO DLC-coated coronary stent suggested its low rates of TVF and angiographic binary restenosis, and small in-stent late loss, although the data were considered preliminary considering the small sample size and single arm study design.

  6. Flexible protective diamond-like carbon film on rubber

    NARCIS (Netherlands)

    Pei, Y.T.; Bui, X.L.; Hosson, J.Th.M. De

    2010-01-01

    In this paper we report an experimental approach to deposit flexible diamond-like carbon (DLC) films on rubber via self-segmentation. By making use of the substantial thermal mismatch between the DLC film and rubber substrate a dense network of cracks forms in the DLC film, contributing to its flexi

  7. Bacterial Adhesion to Diamond-like Carbon as Compared to Stainless Steel

    NARCIS (Netherlands)

    Soininen, Antti; Tiainen, Veli-Matti; Konttinen, Yrjo T.; van der Mei, Henny C.; Busscher, Henk J.; Sharma, Prashant K.

    2009-01-01

    Recent studies suggest that diamond-like carbon (DLC) coatings are suitable candidates for application on biomedical devices and implants, due to their high hardness, low friction, high wear and corrosion resistance, chemical inertness, smoothness, and tissue and blood compatibility. However, most s

  8. Electronic Power System Application of Diamond-Like Carbon Films

    Science.gov (United States)

    Wu, Richard L. C.; Kosai, H.; Fries-Carr, S.; Weimer, J.; Freeman, M.; Schwarze, G. E.

    2003-01-01

    A prototype manufacturing technology for producing high volume efficiency and high energy density diamond-like carbon (DLC) capacitors has been developed. Unique dual ion-beam deposition and web-handling systems have been designed and constructed to deposit high quality DLC films simultaneously on both sides of capacitor grade aluminum foil and aluminum-coated polymer films. An optimized process, using inductively coupled RF ion sources, has been used to synthesize electrically robust DLC films. DLC films are amorphous and highly flexible, making them suitable for the production of wound capacitors. DLC capacitors are reliable and stable over a wide range of AC frequencies from 20 Hz to 1 MHz, and over a temperature range from .500 C to 3000 C. The compact DLC capacitors offer at least a 50% decrease in weight and volume and a greater than 50% increase in temperature handling capability over equal value capacitors built with existing technologies. The DLC capacitors will be suitable for high temperature, high voltage, pulsed power and filter applications.

  9. Plasma deposited diamond-like carbon films for large neutralarrays

    Energy Technology Data Exchange (ETDEWEB)

    Brown, I.G.; Blakely, E.A.; Bjornstad, K.A.; Galvin, J.E.; Monteiro, O.R.; Sangyuenyongpipat, S.

    2004-07-15

    To understand how large systems of neurons communicate, we need to develop methods for growing patterned networks of large numbers of neurons. We have found that diamond-like carbon thin films formed by energetic deposition from a filtered vacuum arc carbon plasma can serve as ''neuron friendly'' substrates for the growth of large neural arrays. Lithographic masks can be used to form patterns of diamond-like carbon, and regions of selective neuronal attachment can form patterned neural arrays. In the work described here, we used glass microscope slides as substrates on which diamond-like carbon was deposited. PC-12 rat neurons were then cultured on the treated substrates and cell growth monitored. Neuron growth showed excellent contrast, with prolific growth on the treated surfaces and very low growth on the untreated surfaces. Here we describe the vacuum arc plasma deposition technique employed, and summarize results demonstrating that the approach can be used to form large patterns of neurons.

  10. Preparation and Thermal Characterization of Diamond-Like Carbon Films

    Institute of Scientific and Technical Information of China (English)

    BAI Su-Yuan; TANG Zhen-An; HUANG Zheng-Xing; Yu Jun; WANG Jing; LIU Gui-Chang

    2009-01-01

    Diamond-like carbon (DLC) films are prepared on silicon substrates by microwave electron cyclotron resonance plasma enhanced chemical vapor deposition. Raman spectroscopy indicates that the films have an amorphous structure and typical characteristics. The topographies of the films are presented by AFM images. Effective thermal conductivities of the films are measured using a nanosecond pulsed photothermal reflectance method. The results show that thermal conductivity is dominated by the microstructure of the films.

  11. Fabrication of High Transparency Diamond-Like Carbon Film Coating on D263T Glass at Room Temperature as an Antireflection Layer

    Directory of Open Access Journals (Sweden)

    Chii-Ruey Lin

    2013-01-01

    Full Text Available This study intends to deposit high transmittance diamond-like carbon (DLC thin films on D263T glass substrate at room temperature via a diamond powder target using the radio frequency (RF magnetron sputtering technique. Moreover, various process parameters were used to tune the properties of the thin films by using the Taguchi method. Experimental results show that the content of sp3 bonded carbon decreases in accordance with the effect of the substrate temperature. In addition, the hardness of all as-deposited single-layer DLC films ranges from 13.2 to 22.5 GPa, and the RMS surface roughness was improved significantly with the decrease in sputtering pressure. The water repellent of the deposited DLC films improved significantly with the increase of the sp3 content, and its contact angle was larger than that of the noncoated one by 1.45 times. Furthermore, the refraction index (n of all as-deposited DLC films ranges from 1.95 to 2.1 at λ = 600 nm. These results demonstrate that the thickness increased as the reflectance increased. DLC film under an RF power of 150 W possesses high transmissive ability (>81% and low average reflectance ability (<9.5% in the visible wavelengths (at λ = 400–700 nm.

  12. Diamond-Like Carbon Nanorods and Fabrication Thereof

    Science.gov (United States)

    Varshney, Deepak (Inventor); Makarov, Vladimir (Inventor); Morell, Gerardo (Inventor); Saxena, Puja (Inventor); Weiner, Brad (Inventor)

    2017-01-01

    Novel sp. (sup 3) rich diamond-like carbon (DLC) nanorod films were fabricated by hot filament chemical vapor deposition technique. The results are indicative of a bottom-up self-assembly synthesis process, which results in a hierarchical structure that consists of microscale papillae comprising numerous nanorods. The papillae have diameters ranging from 2 to 4 microns and the nanorods have diameters in the 35-45 nanometer range. A growth mechanism based on the vapor liquid-solid mechanism is proposed that accounts for the morphological aspects in the micro- and nano-scales.

  13. Advances in targetry with thin diamond-like carbon foils

    CERN Document Server

    Liechtenstein, V K; Olshanski, E D; Repnow, R; Levin, J; Hellborg, R; Persson, P; Schenkel, T

    2002-01-01

    Thin and stable diamond-like carbon (DLC) foils, which were fabricated at the Kurchatov Institute by sputter deposition, have proved recently to be advantageous for stripping and secondary electron timing of high energy heavy ions in a number of accelerator experiments. This resulted in expanding applications of these DLC foils which necessitated further development efforts directed toward the following applications of DLC targetry: (i) thin stripper foils for lower energy tandem accelerators, (ii) enlarged (up to 66 mm in diameter) stop foils for improved time-of-flight elastic recoil detection ion beam analysis, and (iii) ultra-thin (about 0.6 mu g/cm sup 2) DLC foils for some fundamental and applied physics experiments. Along with the fabrication of thin DLC stripper foils for tandem accelerators, much thicker (up to 200 mu g/cm sup 2) foils for post-stripping of heavy-ion beams in higher energy linacs, are within reach.

  14. Diamond-like nanocomposite coatings for LIGA-fabricated nickel alloy parts.

    Energy Technology Data Exchange (ETDEWEB)

    Prasad, Somuri V.; Scharf, Thomas W.

    2005-03-01

    A commercial plasma enhanced chemical vapor deposition (PECVD) technique with planetary substrate rotation was used to apply a thin (200-400 nm thick) conformal diamond-like carbon (DLC) coating (known as a diamond-like nanocomposite (DLN)) on LIGA fabricated Ni-Mn alloy parts. The PECVD technique is known to overcome the drawbacks associated with the line-of-sight nature of physical vapor deposition (PVD) and substrate heating inherent with traditional chemical vapor deposition (CVD). The purpose of the present study is to characterize the coverage, adhesion, and tribological (friction and wear) behavior of DLN coatings applied to planar and sidewall surfaces of small featured LIGA Ni-Mn fabricated parts, e.g. 280 {micro}m thick sidewalls. Friction and wear tests were performed in dry nitrogen, dry air, and air with 50% RH at Hertzian contact pressures ranging from 0.3 to 0.6 GPa. The friction coefficient of bare Ni-Mn alloy was determined to be 0.9. In contrast, low friction coefficients ({approx}0.02 in dry nitrogen and {approx}0.2 in 50% RH air) and minimal amount of wear were exhibited for the DLN coated LIGA Ni-Mn alloy parts and test coupons. This behavior was due to the ability of the coating to transfer to the rubbing counterface providing low interfacial shear at the sliding contact; resultantly, coating one surface was adequate for low friction and wear. In addition, a 30 nm thick titanium bond layer was determined to be necessary for good adhesion of DLN coating to Ni-Mn alloy substrates. Raman spectroscopy and cross-sectional SEM with energy dispersive x-ray analysis revealed that the DLN coatings deposited by the PECVD with planetary substrate rotation covered both the planar and sidewall surfaces of LIGA fabricated parts, as well as narrow holes of 300 {micro}m (0.012 inch) diameter.

  15. Flexible diamond-like carbon films on rubber : Friction and the effect of viscoelastic deformation of rubber substrates

    NARCIS (Netherlands)

    Pei, Y. T.; Martinez-Martinez, D.; van der Pal, J. P.; Bui, X. L.; Zhou, X. B.; De Hosson, J. Th. M.

    2012-01-01

    This paper focuses on the frictional behavior of flexible diamond-like carbon (DLC) film-coated hydrogenated nitrile butadiene rubber. By making use of the substantial thermal mismatch between DLC film and rubber substrate, a dense network of cracks forms in the DLC films and contributes to flexibil

  16. Tribological properties of amorphous hydrogenated (a-C:H) and hydrogen-free tetrahedral (ta-C) diamond-like carbon coatings under jatropha biodegradable lubricating oil at different temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Mobarak, H.M., E-mail: mobarak.ho31@yahoo.com; Masjuki, H.H.; Mohamad, E. Niza, E-mail: edzrol@um.edu.my; Kalam, M.A.; Rashedul, H.K.; Rashed, M.M.; Habibullah, M.

    2014-10-30

    Highlights: • We tested a-C:H and ta-C DLC coatings as a function of temperature. • Jatropha oil contains large amounts of polar components that enhanced the lubricity of coatings. • CoF decreases with increasing temperature for both contacts. • Wear rate increases with increasing temperature in a-C:H and decreases in ta-C DLC. • At high temperature, ta-C coatings confer more protection than a-C:H coatings. - Abstract: The application of diamond-like carbon (DLC) coatings on automotive components is emerging as a favorable strategy to address the recent challenges in the industry. DLC coatings can effectively lower the coefficient of friction (CoF) and wear rate of engine components, thereby improving their fuel efficiency and durability. The lubrication of ferrous materials can be enhanced by a large amount of unsaturated and polar components of oils. Therefore, the interaction between nonferrous coatings (e.g., DLC) and vegetable oil should be investigated. A ball-on-plate tribotester was used to run the experiments. Stainless steel plates coated with amorphous hydrogenated (a-C:H) DLC and hydrogen-free tetrahedral (ta-C) DLC that slide against 440C stainless steel ball were used to create a ball-on-plate tribotester. The wear track was investigated through scanning electron microscopy. Energy dispersive and X-ray photoelectron spectroscopies were used to analyze the tribofilm inside the wear track. Raman analysis was performed to investigate the structural changes in the coatings. At high temperatures, the CoF in both coatings decreased. The wear rate, however, increased in the a-C:H but decreased in the ta-C DLC-coated plates. The CoF and the wear rate (coated layer and counter surface) were primarily influenced by the graphitization of the coating. Tribochemical films, such as polyphosphate glass, were formed in ta-C and acted as protective layers. Therefore, the wear rate of the ta-C DLC was lower than that of the-C:H DLC.

  17. Low voltage electrodeposition of diamond like carbon (DLC)

    Science.gov (United States)

    Sreejith, K.; Nuwad, J.; Pillai, C. G. S.

    2005-10-01

    Attempt has been made to deposit diamond like carbon (DLC) films from ethanol through electrodeposition at low voltages (80-300 V) at 1 mm interelectrode separation. The films were characterized by atomic force microscopy (AFM), Scanning electron microscopy (SEM), Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy and Auger electron Spectroscopy (AES). AFM investigations revealed the grain sizes are of tens of nanometers. The films were found to be continuous, smooth and close packed. Presence of peaks at 2958, 2929 and 2869 cm -1 in FTIR spectrum indicates the bonding states to be of predominantly sp 3 type (C-H). Raman spectroscopy analysis revealed two broad bands at ˜1350 and ˜1570 cm -1. The downshift of the G-band of graphite is indicative of presence of DLC. Analysis of the Raman spectra for the samples revealed an improvement in the film quality with increase in the voltage. Micro Raman investigations indicate the formation of diamond phase at the deposition potential of 80 V. The sp 2 contents the films calculated from Auger electron spectra were calculated and were found to be 31, 19 and 7.8% for the samples prepared at 80, 150 and 300 V, respectively. A tentative mechanism for the formation of DLC has been proposed. These results indicate the possibility of deposition of DLC at low voltage.

  18. Low voltage electrodeposition of diamond like carbon (DLC)

    Energy Technology Data Exchange (ETDEWEB)

    Sreejith, K. [Novel Materials and Structural Chemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Nuwad, J. [Novel Materials and Structural Chemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India); Pillai, C.G.S. [Novel Materials and Structural Chemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)]. E-mail: cgspil@apsara.barc.ernet.in

    2005-10-15

    Attempt has been made to deposit diamond like carbon (DLC) films from ethanol through electrodeposition at low voltages (80-300 V) at 1 mm interelectrode separation. The films were characterized by atomic force microscopy (AFM), Scanning electron microscopy (SEM), Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy and Auger electron Spectroscopy (AES). AFM investigations revealed the grain sizes are of tens of nanometers. The films were found to be continuous, smooth and close packed. Presence of peaks at 2958, 2929 and 2869 cm{sup -1} in FTIR spectrum indicates the bonding states to be of predominantly sp{sup 3} type (C-H). Raman spectroscopy analysis revealed two broad bands at {approx}1350 and {approx}1570 cm{sup -1}. The downshift of the G-band of graphite is indicative of presence of DLC. Analysis of the Raman spectra for the samples revealed an improvement in the film quality with increase in the voltage. Micro Raman investigations indicate the formation of diamond phase at the deposition potential of 80 V. The sp{sup 2} contents the films calculated from Auger electron spectra were calculated and were found to be 31, 19 and 7.8% for the samples prepared at 80, 150 and 300 V, respectively. A tentative mechanism for the formation of DLC has been proposed. These results indicate the possibility of deposition of DLC at low voltage.

  19. The irradiation studies on diamond-like carbon films

    CERN Document Server

    LiuGuIang; Xie Er Qin

    2002-01-01

    Diamond-like carbon (DLC) films have been deposited on glass substrates using radio-frequency (r.f.) plasma deposition method. gamma-ray, ultraviolet (UV) ray and neutron beam were used to irradiate the DLC films. Raman spectroscopy and infrared (IR) spectroscopy were used to characterize the changing characteristics of SP sup 3 C-H bond and hydrogen content in the films due to the irradiations. It showed that, the damage degrees of the gamma-ray, UV ray and neutron beam on the SP sup 3 C-H bonds are different. Among them, the damage of gamma-ray on the SP sup 3 C-H bond is the weakest. When the irradiation dose of gamma-ray reaches 10x10 sup 4 Gy, the SP sup 3 C-H bond reduces about 50% in number. The square resistance of the films is reduced due to the irradiation of UV ray and this is caused by severe oxidation of the films. Compared with that of the as-deposited one, the IR transmittance of the films irradiated by both gamma-ray and neutron beam is increased to some extent. By using the results on optical...

  20. STUDY OF RAY IRRADIATION ON DIAMOND-LIKE CARBON FILMS

    Institute of Scientific and Technical Information of China (English)

    G.A.Liu; T.M.Wang; E.Q.Xie

    2002-01-01

    Diamond-like carbon (DLC) films have been deposited on glass substrates using radio-frequency (rf) plasma deposition method, γ-ray, ultraviolet (UV) ray were used toirradiate the DLC films. Raman spectroscopy and infrared (IR) spectroscopy were usedto characterize the changing characteristics of SP3 C-H bond and hydrogen content inthe films due to the irradiations. The results show that, the damage degrees induced bythe UV ray on the SP3 C-H bonds are much stronger than that by the γ-ray. When theirradiation dose of γ-ray reaches 10× 104Gy, the SP3 C-H bond reduces about 50% innumber. The square electrical resistance of the films is reduced due to the irradiationof UV ray and this is caused by severe oxidation of the films. By using the results onoptical gap of the films and the fully constrained network theory, the hydrogen contentin the as-deposited films is estimated to be 10-25at.%.

  1. Mechanical stability of the diamond-like carbon film on nitinol vascular stents under cyclic loading

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyun-Jong [Department of Materials Science and Engineering, Seoul National University, Kwan-ak, Seoul 151-744 (Korea, Republic of); Advanced Functional Materials Research Center, Korea Institute of Science and Technology, Seung-buk, Seoul 136-791 (Korea, Republic of); Moon, Myoung-Woon [Future Fusion Technology Laboratory, Korea Institute of Science and Technology, Seung-buk, Seoul 136-791 (Korea, Republic of)], E-mail: mwmoon@kist.re.kr; Lee, Kwang-Ryeol [Future Fusion Technology Laboratory, Korea Institute of Science and Technology, Seung-buk, Seoul 136-791 (Korea, Republic of); Seok, Hyun-Kwang; Han, Seung-Hee [Advanced Functional Materials Research Center, Korea Institute of Science and Technology, Seung-buk, Seoul 136-791 (Korea, Republic of); Ryu, Jae-Woo; Shin, Kyong-Min [Taewoong Medical Inc. Ltd, Gimpo, Gyeonggi 415-873 (Korea, Republic of); Oh, Kyu Hwan [Department of Materials Science and Engineering, Seoul National University, Kwan-ak, Seoul 151-744 (Korea, Republic of)

    2008-12-01

    The mechanical stability of diamond-like carbon (DLC) films coated on nitinol vascular stents was investigated under cyclic loading condition by employing a stent crimping system. DLC films were coated on the vascular stent of a three dimensional structure by using a hybrid ion beam system with rotating jig. The cracking or delamination of the DLC coating occurred dominantly near the hinge connecting the V-shaped segments of the stent where the maximum strain was induced by a cyclic loading of contraction and extension. However the failures were significantly suppressed as the amorphous Si (a-Si) buffer layer thickness increased. Interfacial adhesion strength was estimated from the spalled crack size in the DLC coating for various values of the a-Si buffer layer thickness.

  2. Characterization of the Diamond-like Carbon Based Functionally Gradient Film

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Diamond-like carbon coatings have been used as solid lubricating coatings in vacuum technology for their goodphysical and chemical properties. In this paper, the hybrid technique of unbalanced magnetron sputtering and plasmaimmersion ion implantation (PIll) was adopted to fabricate diamond-like carbon-based functionally gradient film,N/TiN/Ti(N,C)/DLC, on the 304 stainless steel substrate. The film was characterized by using Raman spectroscopyand glancing X-ray diffraction (GXRD), and the topography and surface roughness of the film was observed usingAFM. The mechanical properties of the film were evaluated by nano-indentation. The results showed that the surfaceroughness of the film was approximately 0.732 nm. The hardness and elastic modulus, fracture toughness andinterfacial fracture toughness of N/TiN/Ti(N,C)/DLC functionally gradient film were about 19.84 GPa, 190.03 GPa,3.75 MPa.m1/2 and 5.68 MPa@m1/2, respectively. Compared with that of DLC monolayer and C/TiC/DLC multilayer,this DLC gradient film has better qualities as a solid lubricating coating.

  3. Workshop on diamond and diamond-like-carbon films for the transportation industry

    Energy Technology Data Exchange (ETDEWEB)

    Nichols, F.A.; Moores, D.K. [eds.

    1993-01-01

    Applications exist in advanced transportation systems as well as in manufacturing processes that would benefit from superior tribological properties of diamond, diamond-like-carbon and cubic boron nitride coatings. Their superior hardness make them ideal candidates as protective coatings to reduce adhesive, abrasive and erosive wear in advanced diesel engines, gas turbines and spark-ignited engines and in machining and manufacturing tools as well. The high thermal conductivity of diamond also makes it desirable for thermal management not only in tribological applications but also in high-power electronic devices and possibly large braking systems. A workshop has been recently held at Argonne National Laboratory entitled ``Diamond and Diamond-Like-Carbon Films for Transportation Applications`` which was attended by 85 scientists and engineers including top people involved in the basic technology of these films and also representatives from many US industrial companies. A working group on applications endorsed 18 different applications for these films in the transportation area alone. Separate abstracts have been prepared.

  4. Silicon solar cell performance deposited by diamond like carbon thin film ;Atomic oxygen effects;

    Science.gov (United States)

    Aghaei, Abbas Ail; Eshaghi, Akbar; Karami, Esmaeil

    2017-09-01

    In this research, a diamond-like carbon thin film was deposited on p-type polycrystalline silicon solar cell via plasma-enhanced chemical vapor deposition method by using methane and hydrogen gases. The effect of atomic oxygen on the functioning of silicon coated DLC thin film and silicon was investigated. Raman spectroscopy, field emission scanning electron microscopy, atomic force microscopy and attenuated total reflection-Fourier transform infrared spectroscopy were used to characterize the structure and morphology of the DLC thin film. Photocurrent-voltage characteristics of the silicon solar cell were carried out using a solar simulator. The results showed that atomic oxygen exposure induced the including oxidation, structural changes, cross-linking reactions and bond breaking of the DLC film; thus reducing the optical properties. The photocurrent-voltage characteristics showed that although the properties of the fabricated thin film were decreased after being exposed to destructive rays, when compared with solar cell without any coating, it could protect it in atomic oxygen condition enhancing solar cell efficiency up to 12%. Thus, it can be said that diamond-like carbon thin layer protect the solar cell against atomic oxygen exposure.

  5. Characterization of Diamond Like Carbon Film%DLC膜的表征方法

    Institute of Scientific and Technical Information of China (English)

    孙艳明

    2012-01-01

    DLC(Diamond like carbon)薄膜的表征方法很多,发展的很快,在实验中我们经常采用多种性能测试方法,综合分析,得到较可靠的信息。%Diamond like carbon film has many characterization,growing fast.In the experiment,we often use a variety of performance test,comprehensive analysis,to obtain more reliable information.

  6. The change of bacterial adhesion during deposition nitrogen-diamond like carbon coating on pure titanium%渗氮类金刚石薄膜应用于纯钛后的细菌黏附变化

    Institute of Scientific and Technical Information of China (English)

    尹路; 肖云

    2011-01-01

    Objective The aim of this study was to observe the change of bacterial adhesion on pure titanium coated with nitrogen-diamond like carbon (N-DLC) films and to guide the clinical application. Methods N-DLC was deposited on titanium using ion plating machine, TiN film, anodic oxide film and non-deposition were used as control, then made specimens adhering on the surface of resin denture base for 6 months. The adhesion of Saccharomyces albicans on the titanium surface was observed using scanning electron microscope, and the roughness was tested by roughness detector. Results The number of Saccharomyces albicans adhering on diamond-like carbon film was significantly less than on the other groups (P<0.05), and the growth of bacterial cell was inhibited and in a poor state. The largest number of adhesion and cell strains grew well on anodic oxide film group and non-deposition control group. The change of surface roughness of N-DLC film was less than other group (P<0.05). Conclusion Pure titanium coated with N-DLC film reduced the adhesion of Saccharomyces albicans after clinical application, thereby reduced the risk of denture stomatitis.%目的 观察纯钛试件应用等离子镀膜法镀制纳米渗氮类金刚石(N-DLC)薄膜后的细菌黏附变化,以期对临床应用有所指导.方法 采用等离子镀膜机,在纯钛试件表面沉积N -DLC薄膜、TiN薄膜、阳极氧化膜以及空白对照,然后将其黏附于树脂基托表面,实际使用6个月后,扫描电子显微镜观察白色假丝酵母菌黏附试件情况;粗糙度检测仪对比检测试件粗糙度变化.结果 白色假丝酵母菌在N-DLC膜表面附着数量比其他组试件明显少(P<0.05),且菌体生长不良,处于抑制状态;阳极氧化膜和空白对照试件表面黏附菌量最多,且菌体生长旺盛.N-DLC膜表面粗糙度在戴用前后变化最小(P<0.05).结论 纯钛表面镀制N-DLC膜在口腔实际应用过程中可以明显降低白色假丝酵母菌的黏

  7. Preparation and Investigation of Diamond-like Carbon Stripper Foils

    Institute of Scientific and Technical Information of China (English)

    FAN; Qi-wen; DU; Ying-hui; ZHANG; Rong; XU; Guo-ji

    2013-01-01

    1 Preparation of DLC stripper foils For DLC stripper foils of about 5μg/cm2 thickness,the following methods were used.The DLC foils of about 4μg/cm2 thicknesses were produced by FCVA onto glass slides coated with betaine-saccharose as releasing agent,which was previously covered with the evaporated carbon layers of about 1μg/cm2

  8. Field emission from hybrid diamond-like carbon and carbon nanotube composite structures.

    Science.gov (United States)

    Zanin, H; May, P W; Hamanaka, M H M O; Corat, E J

    2013-12-11

    A thin diamond-like carbon (DLC) film was deposited onto a densely packed "forest" of vertically aligned multiwalled carbon nanotubes (VACNT). DLC deposition caused the tips of the CNTs to clump together to form a microstructured surface. Field-emission tests of this new composite material show the typical low threshold voltages for carbon nanotube structures (2 V μm(-1)) but with greatly increased emission current, better stability, and longer lifetime.

  9. In Vitro Durability - Pivot bearing with Diamond Like Carbon for Ventricular Assist Devices

    CERN Document Server

    de Sá, Rosa Corrêa Leoncio; Leão, Tarcísio Fernandes; da Silva, Evandro Drigo; da Fonseca, Jeison Willian Gomes; da Silva, Bruno Utiyama; Leal, Edir Branzoni; Moro, João Roberto; de Andrade, Aron José Pazin; Bock, Eduardo Guy Perpétuo

    2015-01-01

    Institute Dante Pazzanese of Cardiology (IDPC) develops Ventricular Assist Devices (VAD) that can stabilize the hemodynamics of patients with severe heart failure before, during and/or after the medical practice; can be temporary or permanent. The ADV's centrifugal basically consist of a rotor suspended for system pivoting bearing; the PIVOT is the axis with movement of rotational and the bearing is the bearing surface. As a whole system of an implantable VAD should be made of long-life biomaterial so that there is no degradation or deformation during application time; surface modification techniques have been widely studied and implemented to improve properties such as biocompatibility and durability of applicable materials. The Chemical Vapour Deposition technique allows substrates having melting point higher than 300 {\\deg}C to be coated, encapsulated, with a diamond like carbon film (DLC); The test simulated the actual conditions in which the system of support remains while applying a ADV. The results hav...

  10. Oxygen plasma etching of silver-incorporated diamond-like carbon films

    Energy Technology Data Exchange (ETDEWEB)

    Marciano, F.R., E-mail: fernanda@las.inpe.b [Instituto Nacional de Pesquisas Espaciais (INPE), Laboratorio Associado de Sensores e Materiais (LAS), Av. dos Astronautas 1758, Sao Jose dos Campos, 12227-010, SP (Brazil); Instituto Tecnologico de Aeronautica (ITA), Centro Tecnico Aeroespacial (CTA), Pca. Marechal Eduardo Gomes, 50-Sao Jose dos Campos, 12228-900, SP (Brazil); Bonetti, L.F. [Clorovale Diamantes Industria e Comercio Ltda, Estr. do Torrao de Ouro, 500-Sao Jose dos Campos, 12229-390, SP (Brazil); Pessoa, R.S.; Massi, M. [Instituto Tecnologico de Aeronautica (ITA), Centro Tecnico Aeroespacial (CTA), Pca. Marechal Eduardo Gomes, 50-Sao Jose dos Campos, 12228-900, SP (Brazil); Santos, L.V.; Trava-Airoldi, V.J. [Instituto Nacional de Pesquisas Espaciais (INPE), Laboratorio Associado de Sensores e Materiais (LAS), Av. dos Astronautas 1758, Sao Jose dos Campos, 12227-010, SP (Brazil)

    2009-08-03

    Diamond-like carbon (DLC) film as a solid lubricant coating represents an important area of investigation related to space devices. The environment for such devices involves high vacuum and high concentration of atomic oxygen. The purpose of this paper is to study the behavior of silver-incorporated DLC thin films against oxygen plasma etching. Silver nanoparticles were produced through an electrochemical process and incorporated into DLC bulk during the deposition process using plasma enhanced chemical vapor deposition technique. The presence of silver does not affect significantly DLC quality and reduces by more than 50% the oxygen plasma etching. Our results demonstrated that silver nanoparticles protect DLC films against etching process, which may increase their lifetime in low earth orbit environment.

  11. Deposition of hard and adherent diamond-like carbon films inside steel tubes using a pulsed-DC discharge.

    Science.gov (United States)

    Trava-Airoldi, Vladimir Jesus; Capote, Gil; Bonetti, Luís Francisco; Fernandes, Jesum; Blando, Eduardo; Hübler, Roberto; Radi, Polyana Alves; Santos, Lúcia Vieira; Corat, Evaldo José

    2009-06-01

    A new, low cost, pulsed-DC plasma-enhanced chemical vapor deposition system that uses a bipolar, pulsed power supply was designed and tested to evaluate its capacity to produce quality diamond-like carbon films on the inner surface of steel tubes. The main focus of the study was to attain films with low friction coefficients, low total stress, a high degree of hardness, and very good adherence to the inner surface of long metallic tubes at a reasonable growth rate. In order to enhance the diamond-like carbon coating adhesion to metallic surfaces, four steps were used: (1) argon ion sputtering; (2) plasma nitriding; (3) a thin amorphous silicon interlayer deposition, using silane as the precursor gas; and (4) diamond-like carbon film deposition using methane atmosphere. This paper presents various test results as functions of the methane gas pressure and of the coaxial metal anode diameter, where the pulsed-DC voltage constant is kept constant. The influence of the coaxial metal anode diameter and of the methane gas pressure is also demonstrated. The results obtained showed the possibilities of using these DLC coatings for reduced friction and to harden inner surface of the steel tubes.

  12. Deodorisation effect of diamond-like carbon/titanium dioxide multilayer thin films deposited onto polypropylene

    Energy Technology Data Exchange (ETDEWEB)

    Ozeki, K., E-mail: ozeki@mx.ibaraki.ac.jp [Department of Mechanical Engineering, Ibaraki University, 4-12-1, Nakanarusawa, Hitachi, Ibaraki 316-8511 (Japan); Frontier Research Center for Applied Atomic Sciences, 162-1 Shirakata, Toukai, Ibaraki 319-1106 (Japan); Hirakuri, K.K. [Applied Systems Engineering, Graduate School of Science and Engineering, Tokyo Denki University, Ishizaka, Hatoyama, Hiki, Saitama 350-0394 (Japan); Masuzawa, T. [Department of Mechanical Engineering, Ibaraki University, 4-12-1, Nakanarusawa, Hitachi, Ibaraki 316-8511 (Japan)

    2011-04-15

    Many types of plastic containers have been used for the storage of food. In the present study, diamond-like carbon (DLC)/titanium oxide (TiO{sub 2}) multilayer thin films were deposited on polypropylene (PP) to prevent flavour retention and to remove flavour in plastic containers. For the flavour removal test, two types of multilayer films were prepared, DLC/TiO{sub 2} films and DLC/TiO{sub 2}/DLC films. The residual gas concentration of acetaldehyde, ethylene, and turmeric compounds in bottle including the DLC/TiO{sub 2}-coated and the DLC/TiO{sub 2}/DLC-coated PP plates were measured after UV radiation, and the amount of adsorbed compounds to the plates was determined. The percentages of residual gas for acetaldehyde, ethylene, and turmeric with the DLC/TiO{sub 2} coated plates were 0.8%, 65.2% and 75.0% after 40 h of UV radiation, respectively. For the DLC/TiO{sub 2}/DLC film, the percentages of residual gas for acetaldehyde, ethylene and turmeric decreased to 34.9%, 76.0% and 85.3% after 40 h of UV radiation, respectively. The DLC/TiO{sub 2}/DLC film had a photocatalytic effect even though the TiO{sub 2} film was covered with the DLC film.

  13. Near-surface hydrogen depletion of diamond-like carbon films produced by direct ion deposition

    Energy Technology Data Exchange (ETDEWEB)

    Markwitz, Andreas, E-mail: A.Markwitz@gns.cri.nz [GNS Science, Lower Hutt (New Zealand); The MacDiarmid Institute for Advanced Materials and Nanotechnology (New Zealand); Gupta, Prasanth [GNS Science, Lower Hutt (New Zealand); The MacDiarmid Institute for Advanced Materials and Nanotechnology (New Zealand); Mohr, Berit [GNS Science, Lower Hutt (New Zealand); Hübner, René [Institute of Ion Beam Physics and Materials Research, Helmholtz-Zentrum Dresden-Rossendorf (Germany); Leveneur, Jerome; Zondervan, Albert [GNS Science, Lower Hutt (New Zealand); Becker, Hans-Werner [RUBION, Ruhr-University Bochum (Germany)

    2016-03-15

    Amorphous atomically flat diamond-like carbon (DLC) coatings were produced by direct ion deposition using a system based on a Penning ion source, butane precursor gas and post acceleration. Hydrogen depth profiles of the DLC coatings were measured with the 15N R-NRA method using the resonant nuclear reaction {sup 1}H({sup 15}N, αγ){sup 12}C (E{sub res} = 6.385 MeV). The films produced at 3.0–10.5 kV acceleration voltage show two main effects. First, compared to average elemental composition of the film, the near-surface region is hydrogen depleted. The increase of the hydrogen concentration by 3% from the near-surface region towards the bulk is attributed to a growth model which favours the formation of sp{sup 2} hybridised carbon rich films in the film formation zone. Secondly, the depth at which the maximum hydrogen concentration is measured increases with acceleration voltage and is proportional to the penetration depth of protons produced by the ion source from the precursor gas. The observed effects are explained by a deposition process that takes into account the contributions of ion species, hydrogen effusion and preferential displacement of atoms during direct ion deposition.

  14. Deposition and characterization of hydrogenated diamond-like carbon thin films on rubber seals

    NARCIS (Netherlands)

    Pei, Y.T.; Bui, X.L.; Hosson, J.Th.M. De

    2010-01-01

    Thin films of hydrogenated diamond-like carbon (DLC) have been deposited on hydrogenated nitrile butadiene rubber (HNBR) for reduction of friction and enhancement of wear resistance of dynamic rubber seals. The wax removal and pre-deposition plasma treatment of HNBR substrates are proven to be cruci

  15. Modification of rubber surface with hydrogenated diamond-like carbon thin films

    NARCIS (Netherlands)

    Pei, Y. T.; Bui, X. L.; De Hosson, J. Th. M.; Laudon, M; Romanowicz, B

    2009-01-01

    Thin films of hydrogenated diamond-like carbon (DLC) have been deposited on hydrogenated nitrile butadiene rubber (HNBR) for reduction of friction and enhancement of wear resistance of dynamic rubber seals, by sputtering graphite targets in C(2)H(2)/Ar plasma. The wax removal and pre-deposition plas

  16. Microstructure and tribological performance of diamond-like carbon films deposited on hydrogenated rubber

    NARCIS (Netherlands)

    Pal, J.P. van der; Martinez Martinez, Diego; Pei, Y.T.; Rudolf, P.; Hosson, J.Th.M. De

    2012-01-01

    In this paper, the microstructure and tribological performance of diamond-like carbon (DLC) films prepared by plasma chemical vapor deposition on hydrogenated nitrile butadiene rubbers (HNBR) are studied. Different negative variations of temperature during film growth were selected by proper changes

  17. On the quantification of unbound hydrogen in diamond-like carbon-based thin films

    NARCIS (Netherlands)

    Pei, Y.T.; Chechenin, N.G.; Chernykh, P.N.; Turkin, A; Vainchtein, David; Hosson, J.Th.M. De

    2009-01-01

    This paper presents a new and straightforward approach to quantify the content of unbound hydrogen in diamond-like carbon-based films. In the case of TiC/a-C:H nanocomposite films it is shown that the content of unbound and bound hydrogen can be deconvoluted via thermal release and elastic recoil de

  18. On the quantification of unbound hydrogen in diamond-like carbon-based thin films

    NARCIS (Netherlands)

    Pei, Y.T.; Chechenin, N.G.; Chernykh, P.N.; Turkin, A; Vainchtein, David; Hosson, J.Th.M. De

    2009-01-01

    This paper presents a new and straightforward approach to quantify the content of unbound hydrogen in diamond-like carbon-based films. In the case of TiC/a-C:H nanocomposite films it is shown that the content of unbound and bound hydrogen can be deconvoluted via thermal release and elastic recoil de

  19. Protein arrangement on modified diamond-like carbon surfaces – An ARXPS study

    Energy Technology Data Exchange (ETDEWEB)

    Oosterbeek, Reece N., E-mail: reece.oosterbeek@auckland.ac.nz [Department of Chemical and Materials Engineering, The University of Auckland, Private Bag 92019 (New Zealand); Seal, Christopher K. [Light Metals Research Centre, The University of Auckland, Private Bag 92019 (New Zealand); Hyland, Margaret M. [Department of Chemical and Materials Engineering, The University of Auckland, Private Bag 92019 (New Zealand)

    2014-12-01

    Highlights: • DLC coatings were modified by Ar{sup +} ion sputtering and laser graphitisation. • The surface properties of the coatings were measured, and it was found that the above methods increased sp{sup 2} content and altered surface energy. • ARXPS was used to observe protein arrangement on the surface. • Polar CO/CN groups were seen to be segregated towards the interface, indicating they play an important role in bonding. • This segregation increased with increasing polar surface energy, indicating an increased net attraction between polar groups. - Abstract: Understanding the nature of the interface between a biomaterial implant and the biological fluid is an essential step towards creating improved implant materials. This study examined a diamond-like carbon coating biomaterial, the surface energy of which was modified by Ar{sup +} ion sputtering and laser graphitisation. The arrangement of proteins was analysed by angle resolved X-ray photoelectron spectroscopy, and the effects of the polar component of surface energy on this arrangement were observed. It was seen that polar groups (such as CN, CO) are more attracted to the coating surface due to the stronger polar interactions. This results in a segregation of these groups to the DLC–protein interface; at increasing takeoff angle (further from to DLC–protein interface) fewer of these polar groups are seen. Correspondingly, groups that interact mainly by dispersive forces (CC, CH) were found to increase in intensity as takeoff angle increased, indicating they are segregated away from the DLC–protein interface. The magnitude of the segregation was seen to increase with increasing polar surface energy, this was attributed to an increased net attraction between the solid surface and polar groups at higher polar surface energy (γ{sub S}{sup p})

  20. A New Empirical Model for Estimation of sp3 Fraction in Diamond-Like Carbon Films

    Institute of Scientific and Technical Information of China (English)

    DAI Hai-Yang; WANG Li-Wu; JIANG Hui; HUANG Ning-Kang

    2007-01-01

    A new empirical model to estimate the content of sp3 in diamond-like carbon (DLC) films is presented, based on the conventional Raman spectra excited by 488nm or 514nm visible light for different carbons. It is found that bandwidth of the G peak is related to the sp3 fraction. A wider bandwidth of the G peak shows a higher sp3 fraction in DLC films.

  1. The Influence of Titanium Dioxide on Diamond-Like Carbon Biocompatibility for Dental Applications

    Directory of Open Access Journals (Sweden)

    C. C. Wachesk

    2016-01-01

    Full Text Available The physical and chemical characteristics of diamond-like carbon (DLC films make them suitable for implantable medical and odontological interests. Despite their good interactions with biological environment, incorporated nanoparticles can significantly enhance DLC properties. This manuscript studies the potential of titanium dioxide (TiO2 incorporated-DLC films in dental applications. In this scene, both osteoblasts attachment and spreading on the coatings and their corrosion characteristics in artificial saliva were investigated. The films were grown on 304 stainless steel substrates using plasma enhanced chemical vapor deposition. Raman scattering spectroscopy characterized the film structure. As the concentration of TiO2 increased, the films increased the osteoblast viability (MTT assay, becoming more thermodynamically favorable to cell spreading (WAd values became more negative. The increasing number of osteoblast nuclei indicates a higher adhesion between the cells and the films. The potentiodynamic polarization test in artificial saliva shows an increase in corrosion protection when TiO2 are present. These results show the potential use of TiO2-DLC films in implantable surfaces.

  2. Optical and mechanical properties of diamond like carbon films deposited by microwave ECR plasma CVD

    Indian Academy of Sciences (India)

    S B Singh; M Pandey; N Chand; A Biswas; D Bhattacharya; S Dash; A K Tyagi; R M Dey; S K Kulkarni; D S Patil

    2008-10-01

    Diamond like carbon (DLC) films were deposited on Si (111) substrates by microwave electron cyclotron resonance (ECR) plasma chemical vapour deposition (CVD) process using plasma of argon and methane gases. During deposition, a d.c. self-bias was applied to the substrates by application of 13.56 MHz rf power. DLC films deposited at three different bias voltages (–60 V, –100 V and –150 V) were characterized by FTIR, Raman spectroscopy and spectroscopic ellipsometry to study the variation in the bonding and optical properties of the deposited coatings with process parameters. The mechanical properties such as hardness and elastic modulus were measured by load depth sensing indentation technique. The DLC film deposited at –100 V bias exhibit high hardness (∼ 19 GPa), high elastic modulus (∼ 160 GPa) and high refractive index (∼ 2.16–2.26) as compared to films deposited at –60 V and –150 V substrate bias. This study clearly shows the significance of substrate bias in controlling the optical and mechanical properties of DLC films.

  3. Iron, nitrogen and silicon doped diamond like carbon (DLC) thin films: A comparative study

    Energy Technology Data Exchange (ETDEWEB)

    Ray, Sekhar C., E-mail: Raysc@unisa.ac.za [Department of Physics, College of Science, Engineering and Technology, University of South Africa, Private Bag X6, Florida, 1710, Science Campus, Christiaan de Wet and Pioneer Avenue, Florida Park, Johannesburg (South Africa); Pong, W.F. [Department of Physics, Tamkang University, Tamsui 251, New Taipei City, Taiwan (China); Papakonstantinou, P. [Nanotechnology and Integrated Bio-Engineering Centre, University of Ulster, Shore Road, Newtownabbey BT37 0QB (United Kingdom)

    2016-07-01

    The X-ray absorption near edge structure (XANES), X-ray photoelectron spectroscopy (XPS), valence band photoemission (VB-PES) and Raman spectroscopy results show that the incorporation of nitrogen in pulsed laser deposited diamond like carbon (DLC) thin films, reverts the sp{sup 3} network to sp{sup 2} as evidenced by an increase of the sp{sup 2} cluster and I{sub D}/I{sub G} ratio in C K-edge XANES and Raman spectra respectively which reduces the hardness/Young's modulus into the film network. Si-doped DLC film deposited in a plasma enhanced chemical vapour deposition process reduces the sp{sup 2} cluster and I{sub D}/I{sub G} ratio that causes the decrease of hardness/Young's modulus of the film structure. The Fe-doped DLC films deposited by dip coating technique increase the hardness/Young's modulus with an increase of sp{sup 3}-content in DLC film structure. - Highlights: • Fe, N and Si doped DLC films deposited by dip, PLD and PECVD methods respectively • DLC:Fe thin films have higher hardness/Young's modulus than DLC:N(:Si) thin films. • sp{sup 3} and sp{sup 2} contents are estimated from C K-edge XANES and VB-PES measurements.

  4. INFLUENCE OF THE SILICON INTERLAYER ON DIAMOND-LIKE CARBON FILMS DEPOSITED ON GLASS SUBSTRATES

    Directory of Open Access Journals (Sweden)

    Deiler Antonio Lima Oliveira

    2012-06-01

    Full Text Available Diamond-like carbon (DLC films as a hard protective coating have achieved great success in a diversity of technological applications. However, adhesion of DLC films to substrates can restrict their applications. The influence of a silicon interlayer in order to improve DLC adhesion on glass substrates was investigated. Amorphous silicon interlayer and DLC films were deposited using plasma enhanced chemical vapor deposition from silane and methane, respectively. The bonding structure, transmittance, refraction index, and adherence of the films were also evaluated regarding the thickness of the silicon interlayer. Raman scattering spectroscopy did not show any substantial difference in DLC structure due to the interlayer thickness of the silicon. Optical measurements showed a sharp decrease of transmittance in the ultra-violet region caused by the fundamental absorption of the light. In addition, the absorption edge of transmittance shifted toward longer wavelength side in the ultra-violet region as the thickness of the silicon interlayer increased. The tribological results showed an increase of DLC adherence as the silicon interlayer increased, which was characterized by less cracks around the grooves.

  5. X-ray reflectivity study of bias graded diamond like carbon film synthesized by ECR plasma

    Indian Academy of Sciences (India)

    R M Dey; S K Deshpande; S B Singh; N Chand; D S Patil; S K Kulkarni

    2013-02-01

    Diamond like carbon (DLC) coatings were deposited on silicon substrates by microwave electron cyclotron resonance (ECR) plasma CVD process using plasma of Ar and CH4 gases under the influence of negative d.c. self bias generated on the substrates by application of RF (13.56 MHz) power. The negative bias voltage was varied from −60 V to −150 V during deposition of DLC films on Si substrate. Detailed X-ray reflectivity (XRR) study was carried out to find out film properties like surface roughness, thickness and density of the films as a function of variation of negative bias voltage. The study shows that the DLC films constituted of composite layer i.e. the upper sub surface layer followed by denser bottom layer representing the bulk of the film. The upper layer is relatively thinner as compared to the bottom layer. The XRR study was an attempt to substantiate the sub-plantation model for DLC film growth.

  6. Preparation and investigation of diamond-like carbon stripper foils by filtered cathodic vacuum arc

    Energy Technology Data Exchange (ETDEWEB)

    Fan, Qiwen, E-mail: fanqiwen0926@163.com [Department of Nuclear Physics, China Institute of Atomic Energy, P.O. Box 275(62), Beijing 102413 (China); Du, Yinghui; Zhang, Rong; Xu, Guoji [Department of Nuclear Physics, China Institute of Atomic Energy, P.O. Box 275(62), Beijing 102413 (China)

    2013-04-21

    Thin diamond-like carbon (DLC) stripper foils ∼5μg/cm{sup 2} in thickness were produced and evaluated as heavy-ion strippers for the Beijing HI-13 Tandem Accelerator. The DLC layers ∼4μg/cm{sup 2} in thickness were produced by the filtered cathodic vacuum arc technology onto glass slides coated with betaine–saccharose as releasing agent, which were previously covered with evaporated carbon layers ∼1μg/cm{sup 2} in thickness by the controlled ac arc-discharge method. Irradiation lifetimes of the DLC stripper foils were tested using the heavy-ion beams at the terminal of the Beijing HI-13 Tandem Accelerator, and compared with those of the standard carbon stripper foils made by the combined dc and ac arc-discharge method. The measurements indicate that the DLC stripper foils outlast the standard combined dc and ac arc-discharge carbon stripper foils by a factor of at least 13 and 4 for the {sup 197}Au{sup −} (∼9MeV, ∼1μA) and {sup 63}Cu{sup −} (∼9MeV, ∼1μA) ion beams, respectively. The structure and properties of the DLC foils deposited onto silicon substrates by the filtered cathodic vacuum arc technology were also evaluated and analyzed by scanning electron microscopy, Raman spectroscopy and X-ray photoelectron spectroscopy. The scanning electron microscopy images show that the DLC foils contain hardly droplets through the double 90° filters. The X-ray photoelectron spectrum indicates that sp{sup 3} bonds of the DLC foils exceed 70%. The integral intensity ratio of the D peak to the G peak (I{sub D}/I{sub G}) measured by the Raman spectroscopy is 0.78.

  7. Electrodeposition of diamond-like carbon films on titanium alloy using organic liquids: Corrosion and wear resistance

    Energy Technology Data Exchange (ETDEWEB)

    Falcade, Tiago, E-mail: tiago.falcade@ufrgs.br [Federal University of Rio Grande do Sul, 9500 Bento Goncalves Ave. Sector 4, Building 75, 2nd floor, Porto Alegre, RS (Brazil); Shmitzhaus, Tobias Eduardo, E-mail: tobiasschmitzhaus@gmail.com [Federal University of Rio Grande do Sul, Porto Alegre, RS (Brazil); Gomes dos Reis, Otavio, E-mail: otavio_gomes214@hotmail.com [Federal University of Rio Grande do Sul, Porto Alegre, RS (Brazil); Vargas, Andre Luis Marin; Huebler, Roberto [Pontificia Universidade Catolica do Rio Grande do Sul (Brazil); Mueller, Iduvirges Lourdes, E-mail: ilmuller@ufrgs.br [Federal University of Rio Grande do Sul, Porto Alegre, RS (Brazil); Fraga Malfatti, Celia de, E-mail: celia.malfatti@ufrgs.br [Federal University of Rio Grande do Sul, Porto Alegre, RS (Brazil)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer The electrodeposition may be conducted at room temperature. Black-Right-Pointing-Pointer The DLC films have good resistance to corrosion in saline environments. Black-Right-Pointing-Pointer The films have lower coefficient of friction than the uncoated substrate. Black-Right-Pointing-Pointer The abrasive wear protection is evident in coated systems. - Abstract: Diamond-like carbon (DLC) films have been studied as coatings for corrosion protection and wear resistance because they have excellent chemical inertness in traditional corrosive environments, besides presenting a significant reduction in coefficient of friction. Diamond-like carbon (DLC) films obtained by electrochemical deposition techniques have attracted a lot of interest, regarding their potential in relation to the vapor phase deposition techniques. The electrochemical deposition techniques are carried out at room temperature and do not need vacuum system, making easier this way the technological transfer. At high electric fields, the organic molecules polarize and react on the electrode surface, forming carbon films. The aim of this work was to obtain DLC films onto Ti6Al4V substrate using as electrolyte: acetonitrile (ACN) and N,N-dimethylformamide (DMF). The films were characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM), Raman spectroscopy, potentiodynamic polarization and wear tests. The results show that these films can improve, significantly, the corrosion resistance of titanium and its alloys and their wear resistance.

  8. Nanostructured Diamond-Like Carbon Films Grown by Off-Axis Pulsed Laser Deposition

    Directory of Open Access Journals (Sweden)

    Seong Shan Yap

    2015-01-01

    Full Text Available Nanostructured diamond-like carbon (DLC films instead of the ultrasmooth film were obtained by pulsed laser ablation of pyrolytic graphite. Deposition was performed at room temperature in vacuum with substrates placed at off-axis position. The configuration utilized high density plasma plume arriving at low effective angle for the formation of nanostructured DLC. Nanostructures with maximum size of 50 nm were deposited as compared to the ultrasmooth DLC films obtained in a conventional deposition. The Raman spectra of the films confirmed that the films were diamond-like/amorphous in nature. Although grown at an angle, ion energy of >35 eV was obtained at the off-axis position. This was proposed to be responsible for subplantation growth of sp3 hybridized carbon. The condensation of energetic clusters and oblique angle deposition correspondingly gave rise to the formation of nanostructured DLC in this study.

  9. Diamond-like carbon formation for various positions by pulsed laser deposition

    Energy Technology Data Exchange (ETDEWEB)

    Yap, Seong-Shan [Faculty of Engineering, Multimedia University, 63100 Cyberjaya, Selangor (Malaysia)]. E-mail: ssyap@mmu.edu.my; Tou, Teck-Yong [Faculty of Engineering, Multimedia University, 63100 Cyberjaya, Selangor (Malaysia)

    2005-07-30

    Pulsed laser ablation of pyrolytic graphite target was carried out by an Nd-YAG laser with {lambda} = 1064 nm and fluence in the range of 1-10 J/cm{sup 2}. The plume was produced by focusing the laser beam and rastering over a 6.5 mm x 6.5 mm area on the graphite target. The substrates were placed at two positions: on-axis position facing the target and off-axis position in the target plane with 2 mm offset from the ablation site. Diamond-like carbon was formed on the substrates at both positions and on the ablated area as detected by Raman spectroscopy. Rough and granular surface was observed for the samples placed in the target plane and smooth diamond-like carbon films for the samples placed facing the target as observed by SEM and optical microscopy.

  10. Plasmonic Properties of Nanostructured Diamond Like Carbon/Silver Nanocomposite Films with Nanohole Arrays

    Directory of Open Access Journals (Sweden)

    Šarūnas MEŠKINIS

    2016-11-01

    Full Text Available Plasmonic properties of the diamond like carbon nanocomposite films with embedded silver nanoparticles with patterned nanohole arrays were analyzed in this study. The films were deposited by unbalanced reactive magnetron sputtering of silver target. Nanopatterning of the films was performed by combining electron beam nanolithography and ion beam etching techniques. Modeling of plasmonic properties was done using the classical Maxwell-Garnett theory. Modeling data and experimental results were in good accordance. Formation of the nanohole pattern in diamond like carbon films doped with silver resulted in decreased intensity of the surface plasmon resonance absorbance peak. No new absorbance or transmittance peaks were observed after the nanopattering. It was explained by extraordinary transmission effect in nanostructured DLC : Ag film films due to plasmon polariton resonance inside of the nanoholes.DOI: http://dx.doi.org/10.5755/j01.ms.22.4.13193

  11. Diamond-like a-C:H coatings deposited in a non-self-sustained discharge with plasma cathode

    Science.gov (United States)

    Gavrilov, N. V.; Mamaev, A. S.; Kaĭigorodov, A. S.

    2009-01-01

    Hydrogenated amorphous carbon (a-C:H) coatings have been obtained by means of acetylene decomposition in a non-self-sustained periodic pulse discharge (2A, 50 kHz, 10 μs) with hollow cathode. The discharge operation was maintained by plasma cathode emission with grid stabilization based on dc glow discharge. Using the proposed method, it is possible to control the deposition conditions (total pressure of the Ar + C2H2 mixture, partial pressure of C2H2, ion current density, carbon ion energy) within broad limits, to apply a-C:H coatings onto large-area articles, and to perform deposition in one technological cycle with ion etching and ion implantation treatments aimed at improving the adhesion of coatings to substrates (Ti, Al, stainless steel, VK8 hard alloy) at temperatures below 150°C. Results of determining the deposition rate (1-8 μm), the nanohardness of coatings (up to 70 GPa), and the fraction of sp 3 bonds (25-70%) in the diamond-like coating material are presented.

  12. Optical and morphological properties of porous diamond-like-carbon films deposited by magnetron sputtering

    OpenAIRE

    Baroni, M. P. M. A.; Conceição, M. Ventura; Rosa, R. R.; Persson, C.; Arwin, H.; Silva Jr., E.F. da; Roman, L.S.; Nakamura, O.; I. Pepe; Silva, A. Ferreira da

    2006-01-01

    RESTRITO Porous diamond-like-carbon (PDLC) thin films obtained on silicon substrate by DC low energy magnetron sputtering have been investigated by photoluminescence, transmission and reflection spectroscopy, photoacoustic and spectroscopic ellipsometry. The absorption features observed for these films show similarities with those of porous silicon (PS) as well as in the performed gradient structural pattern classification of the SFM porosity, by means of the computational GPA-flyby enviro...

  13. Gas Permeation, Mechanical Behavior and Cytocompatibility of Ultrathin Pure and Doped Diamond-Like Carbon and Silicon Oxide Films

    Directory of Open Access Journals (Sweden)

    Juergen M. Lackner

    2013-12-01

    Full Text Available Protective ultra-thin barrier films gather increasing economic interest for controlling permeation and diffusion from the biological surrounding in implanted sensor and electronic devices in future medicine. Thus, the aim of this work was a benchmarking of the mechanical oxygen permeation barrier, cytocompatibility, and microbiological properties of inorganic ~25 nm thin films, deposited by vacuum deposition techniques on 50 µm thin polyetheretherketone (PEEK foils. Plasma-activated chemical vapor deposition (direct deposition from an ion source was applied to deposit pure and nitrogen doped diamond-like carbon films, while physical vapor deposition (magnetron sputtering in pulsed DC mode was used for the formation of silicon as well as titanium doped diamond-like carbon films. Silicon oxide films were deposited by radio frequency magnetron sputtering. The results indicate a strong influence of nanoporosity on the oxygen transmission rate for all coating types, while the low content of microporosity (particulates, etc. is shown to be of lesser importance. Due to the low thickness of the foil substrates, being easily bent, the toughness as a measure of tendency to film fracture together with the elasticity index of the thin films influence the oxygen barrier. All investigated coatings are non-pyrogenic, cause no cytotoxic effects and do not influence bacterial growth.

  14. Irradiation Effect of γ Rays on Diamond-Like Carbon Films

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Diamond-like carbon films, prepared by RF glow discharge on glasssubstrates, were irradiated by γ rays. The as-deposited and irradiated films were characterized by Raman spectroscopy, electrical resistivity, and infrared transmittance. It is shown that the irradiation of the γ rays can lead to the breaking of SP3C-H and SP2C-H bonds, slight increasing of SP3C-C bonds, and induced hydrogen recombination with H2 molecules, subsequently diffusing to the surface of the films. When the γ rays irradiation dose reached 10×104 Gy, the numbers of SP3C-H bonds was decreased by about 50%, the resistivity of irradiated DLC films was increased, and the diamond-like character of the films became more obvious. The structure of DLC films was modified when irradiated by γ rays. The irradiation mechanisms are briefly discussed.

  15. Short pulse laser-induced optical damage and fracto-emission of amorphous, diamond-like carbon

    Energy Technology Data Exchange (ETDEWEB)

    SOKOLOWSKI-TINTEN,K.; VON DER LINDE,D.; SIEGAL,MICHAEL P.; OVERMYER,DONALD L.

    2000-02-07

    Short pulse laser damage and ablation of amorphous, diamond-like carbon films is investigated. Material removal is due to fracture of the film and ejection of large fragments, which exhibit a broadband emission of microsecond duration.

  16. Electrical and magnetic properties of electrodeposited nickel incorporated diamond-like carbon thin films

    Energy Technology Data Exchange (ETDEWEB)

    Pandey, B., E-mail: pandey.beauty@yahoo.com [Department of Applied Physics, Indian School of Mines, Dhanbad 826004 (India); Das, D. [UGC-DAE CSR, Sector III/LB-8, Bidhan Nagar, Kolkata 700098 (India); Kar, A.K. [Department of Applied Physics, Indian School of Mines, Dhanbad 826004 (India)

    2015-05-15

    Highlights: • Electrical and magnetic properties of DLC and Ni-DLC thin films are studied. • The ohmicity and conductivity of DLC films rise with nickel addition. • The ohmicity of Ni-DLC is enhanced with increase in dilution of electrolyte. • Dielectric loss is high for Ni-DLC and decreases with frequency till 100 kHz. • (m–H) and (m–T) curves of Ni-DLC indicate superparamagnetic behavior. - Abstract: Nanocomposite diamond-like carbon (DLC) thin films have been synthesized by incorporating nickel (Ni) nanoparticles in DLC matrix with varying concentration of nickel. DLC and Ni-DLC thin films have been deposited on ITO coated glass substrates employing low voltage electrodeposition method. Electrical properties of the samples were studied by measuring current–voltage characteristics and dielectric properties. The current approaches toward an ohmic behavior with metal addition. This tendency of increasing ohmicity is enhanced with increase in dilution of the electrolyte. The conductivity increases with Ni addition and interestingly it continues to increase with dilution of Ni concentration in the electrolyte in the range of our study. Magnetic properties for DLC and Ni-DLC thin film samples were examined by electron paramagnetic resonance (EPR) measurements and Super Conducting Quantum Interference Device (SQUID) measurements. g-Value for DLC is 2.074, whereas it decreases to 2.055 with Ni addition in the electrolyte. This decrement arises from the increased sp{sup 2} content in DLC matrix. The magnetic moment vs. magnetic field (m–H) curves of Ni-DLC indicate superparamagnetic behavior which may be due to ferromagnetic contribution from the incorporated nickel nanoparticles in the DLC matrix. The ZFC curve of Ni-DLC after the blocking temperature shows a combined contribution of ferromagnetic, superparamagnetic and paramagnetic nature of the materials persisting up to 300 K.

  17. Microstructure and tribological performance of diamond-like carbon films deposited on hydrogenated rubber

    Energy Technology Data Exchange (ETDEWEB)

    Pal, J.P. van der [Materials Innovation Institute M2i, Department of Applied Physics, University of Groningen, Nijenborgh 4, 9747 AG Groningen (Netherlands); Martinez-Martinez, D., E-mail: d.martinez.martinez@rug.nl [Materials Innovation Institute M2i, Department of Applied Physics, University of Groningen, Nijenborgh 4, 9747 AG Groningen (Netherlands); Pei, Y.T., E-mail: y.pei@rug.nl [Materials Innovation Institute M2i, Department of Applied Physics, University of Groningen, Nijenborgh 4, 9747 AG Groningen (Netherlands); Rudolf, P. [Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, 9747 AG Groningen (Netherlands); De Hosson, J.Th.M. [Materials Innovation Institute M2i, Department of Applied Physics, University of Groningen, Nijenborgh 4, 9747 AG Groningen (Netherlands)

    2012-12-01

    In this paper, the microstructure and tribological performance of diamond-like carbon (DLC) films prepared by plasma chemical vapor deposition on hydrogenated nitrile butadiene rubbers (HNBR) are studied. Different negative variations of temperature during film growth were selected by proper changes of the bias voltage. Raman measurements show a similar bonding regardless of the voltages used. A columnar growth and a tile-like microstructure of the DLC films were identified by scanning electron microscopy. Patch sizes can be correlated with the deposition conditions. The coefficient of friction (CoF) of DLC film coated HNBR was found to be much lower than that of the unprotected rubber, and more reduced for the DLC films with smaller patch sizes, which is explained by a better flexibility and conformity of the film during testing. In one of the samples, unexpected low CoF was observed, which was attributed to a modification of the mechanical properties of the rubber during the plasma treatment at high voltage. This issue was confirmed by X-ray photoelectron spectroscopy, which indicated a modification of the cross linking in the rubber. - Highlights: Black-Right-Pointing-Pointer Bias voltage does not vary the chemical bonding and surface morphology of films. Black-Right-Pointing-Pointer Film structure is patched, whose size depends on the etching and deposition voltages. Black-Right-Pointing-Pointer The frictional behavior can be correlated with the patch size of the films. Black-Right-Pointing-Pointer Surface analysis showed that rubber x-linking is modified by etching at high voltage. Black-Right-Pointing-Pointer Modification of rubber x-linking leads to a different frictional behavior.

  18. Study of facing target sputtered diamond-like carbon overcoats for hard disk drive media

    Energy Technology Data Exchange (ETDEWEB)

    Seet, H.L., E-mail: SEET_Hang_Li@dsi.a-star.edu.sg [Data Storage Institute, A*STAR Agency for Science, Technology and Research, 5 Engineering Drive 1, 117608 (Singapore); Ng, K.K.; Chen, X.Y. [Data Storage Institute, A*STAR Agency for Science, Technology and Research, 5 Engineering Drive 1, 117608 (Singapore); Yang, P. [Singapore Synchrotron Light Source (SSLS), National University of Singapore, 5 Research Link, 117603 (Singapore); Shen, L. [Institute of Materials Research and Engineering, A*STAR Agency for Science, Technology and Research, 3 Research Link, 117602 (Singapore); Ji, R.; Ng, H.X.; Lim, C.B. [Data Storage Institute, A*STAR Agency for Science, Technology and Research, 5 Engineering Drive 1, 117608 (Singapore)

    2015-07-01

    The demand for higher areal density in the hard disk drive industry has fuelled extensive research efforts and focuses on magnetic spacing reduction. In the head–disk interface arena, one of the key focuses is to reduce the carbon overcoat thickness without compromising the overcoat protection performance. Thus, in the search for alternative methods to reduce the carbon overcoat thickness, the facing target sputtering (FTS) process for diamond-like carbon deposition has been investigated. The resulting properties have been presented in this paper, with comparison to conventional diamond-like carbon (DLC) layers by other processes such as chemical vapor deposition and reactive sputtering with nitrogen. X-ray reflectometry results showed that facing target sputtered DLC samples displayed significantly higher density, at 2.87 g/cm{sup 3}, as compared to hydrogenated and nitrogenated DLC samples. This was attributed to the higher sp{sup 3} content, as obtained by X-ray photoelectron spectroscopy measurements. As a result of the high sp{sup 3} content, hardness of the FTS deposited samples was higher than that of the hydrogenated and nitrogenated DLC samples. In addition, the surface energy of FTS samples was observed to be comparable, but lower, than that of nitrogenated DLC samples through contact angle measurements. Clearances comparable to that of conventional DLC samples were achieved and the sample disks were flyable. Wear performance tests also revealed more wear resistance for the FTS deposited DLC samples, but also higher head wear. - Highlights: • Facing target sputtered (FTS) diamond-like carbon (DLC) samples were studied. • FTS DLC samples possess higher density and hardness. • Surface conditions and flyability performances for FTS DLC samples were comparable. • Wear tests on FTS DLC samples showed lower media wear, but higher head wear.

  19. Surface characterization and orientation interaction between diamond- like carbon layer structure and dimeric liquid crystals

    Science.gov (United States)

    Naradikian, H.; Petrov, M.; Katranchev, B.; Milenov, T.; Tinchev, S.

    2017-01-01

    Diamond-like carbon (DLC) and amorphous carbon films are very promising type of semiconductor materials. Depending on the hybridization sp2/sp3 ratio, the material’s band gap varies between 0.8 and 3 eV. Moreover carbon films possess different interesting for practice properties: comparable to the Silicon, Diamond like structure has 22-time better thermal conductivity etc. Here we present one type of implementation of such type nanostructure. That is one attempt for orientation of dimeric LC by using of pre-deposited DLC layer with different ratio of sp2/sp3 hybridized carbon content. It could be expected a pronounced π1-π2interaction between s and p orbital levels on the surface and the dimeric ring of LC. We present comparison of surface anchoring strengths of both orientation inter-surfaces DLC/dimeric LC and single wall carbon nanotubes (SWCNT)/dimeric LC. The mechanism of interaction of dimeric LC and activated surfaces with DLC or SWCNT will be discussed. In both cases we have π-π interaction, which in combination with hydrogen bonding, typical for the dimeric LCs, influence the LC alignment. The Raman spectroscopy data evidenced the presence of charge transfer between contacting hexagonal rings of DLC and the C = O groups of the LC molecules.

  20. Characteristics of Nitrogen Doped Diamond-Like Carbon Films Prepared by Unbalanced Magnetron Sputtering for Electronic Devices.

    Science.gov (United States)

    Lee, Jaehyeong; Choi, Byung Hui; Yun, Jung-Hyun; Park, Yong Seob

    2016-05-01

    Synthetic diamond-like carbon (DLC) is a carbon-based material used mainly in cutting tool coatings and as an abrasive material. The market for DLC has expanded into electronics, optics, and acoustics because of its distinct electrical and optical properties. In this work, n-doped DLC (N:DLC) films were deposited on p-type silicon substrates using an unbalanced magnetron sputtering (UBMS) method. We investigated the effect of the working pressure on the microstructure and electrical properties of n-doped DLC films. The structural properties of N:DLC films were investigated by Raman spectroscopy and SEM-EDX, and the electrical properties of films were investigated by observing the changes in the resistivity and current-voltage (I-V) properties. The N:DLC films prepared by UBMS in this study demonstrated good conducting and physical properties with n-doping.

  1. Deposition and characterization of diamond-like nanocomposite coatings grown by plasma enhanced chemical vapour deposition over different substrate materials

    Indian Academy of Sciences (India)

    Awadesh Kr Mallik; Nanadadulal Dandapat; Prajit Ghosh; Utpal Ganguly; Sukhendu Jana; Sayan Das; Kaustav Guha; Garfield Rebello; Samir Kumar Lahiri; Someswar Datta

    2013-04-01

    Diamond-like nanocomposite (DLN) coatings have been deposited over different substrates used for biomedical applications by plasma-enhanced chemical vapour deposition (PECVD). DLN has an interconnecting network of amorphous hydrogenated carbon and quartz-like oxygenated silicon. Raman spectroscopy, Fourier transform–infra red (FT–IR) spectroscopy, transmission electron microscopy (TEM) and X-ray diffraction (XRD) have been used for structural characterization. Typical DLN growth rate is about 1 m/h, measured by stylus profilometer. Due to the presence of quartz-like Si:O in the structure, it is found to have very good adhesive property with all the substrates. The adhesion strength found to be as high as 0.6 N on SS 316 L steel substrates by scratch testing method. The Young’s modulus and hardness have found to be 132 GPa and 14.4 GPa, respectively. DLN coatings have wear factor in the order of 1 × 10-7 mm3/N-m. This coating has found to be compatible with all important biomedical substrate materials and has successfully been deposited over Co–Cr alloy based knee implant of complex shape.

  2. Deposition of diamond like carbon films by using a single ion gun with varying beam source

    Institute of Scientific and Technical Information of China (English)

    JIANG Jin-qiu; Chen Zhu-ping

    2001-01-01

    Diamond like carbon films have been successfully deposited on the steel substrate, by using a single ion gun with varying beam source. The films may appear blue, yellow and transparent in color, which was found related to contaminants from the sample holder and could be avoided. The thickness of the films ranges from tens up to 200 nanometers, and the hardness is in the range 20 to 30 GPa. Raman analytical results reveal the films are in amorphous structure. The effects of different beam source on the films structure are further discussed.

  3. Panel 2 - properties of diamond and diamond-like-carbon films

    Energy Technology Data Exchange (ETDEWEB)

    Blau, P.J.; Clausing, R.E. [Oak Ridge National Lab., TN (United States); Ajayi, O.O.; Liu, Y.Y.; Purohit, A. [Argonne National Lab., IL (United States); Bartelt, P.F. [Deere & Co., Moline, IL (United States); Baughman, R.H. [Allied Signal, Morristown, NJ (United States); Bhushan, B. [Ohio State Univ., Columbus (United States); Cooper, C.V. [United Technologies Research Center, East Hartford, CT (United States); Dugger, M.T. [Sandia National Laboratories, Albuquerque, NM (United States); Freedman, A. [Aerodyne Research, Inc., Billerica, MA (United States); Larsen-Basse, J. [National Science Foundation, Washington, DC (United States); McGuire, N.R. [Caterpillar, Peoria, IL (United States); Messier, R.F. [Pennsylvania State Univ., University Park (United States); Noble, G.L.; Ostrowki, M.H. [John Crane, Inc., Morton Grove, IL (United States); Sartwell, B.D. [Naval Research Lab., Washington, DC (United States); Wei, R. [Colorado State Univ., Fort Collins (United States)

    1993-01-01

    This panel attempted to identify and prioritize research and development needs in determining the physical, mechanical and chemical properties of diamond and diamond-like-carbon films (D/DLCF). Three specific goals were established. They were: (1) To identify problem areas which produce concern and require a better knowledge of D/DLCF properties. (2) To identify and prioritize key properties of D/DLCF to promote transportation applications. (3) To identify needs for improvement in properties-measurement methods. Each of these goals is addressed subsequently.

  4. Preparation and Characteristics of Nanoscale Diamond-Like Carbon Films for Resistive Memory Applications

    Institute of Scientific and Technical Information of China (English)

    FU Di; XIE Dan; ZHANG Chen-Hui; ZHANG Di; NIU Jie-Bin; QIAN He; LIU Li-Tian

    2010-01-01

    @@ We propose diamond-like carbon(DLC)as the resistance change material for nonvolatile memory applications.Nanoscale DLC films are prepared by filtered cathodic vacuum arc technique and integrated to W/DLC/W structure devices.The deposited DLC film has a thickness of about 2O nm and high sp3 fraction content.Reversible bistable resistive switching from a high resistance state to a low resistance state,and vice versa,is observed under appropriate unipolar stimulation pulses.

  5. Study of relationship between structure and transmittance of diamond-like carbon (DLC) films

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    In this paper, the transparent hard diamond-like carbon (DLC) films were deposited on glass substrate by magnetic confined radio-frequency plasma chemical vapor deposition. The structure of films was studied by Raman spectra and X-ray photoelectron spectra (XPS), the transmittance of films by Spectrophotometer. The mechanism of the influence of films structure on transmittance of the films was discussed. The results show that the thickness of films was lower than 100nm, and the transmittance was over 90% in 380-780 nm region. Discussion in theory on the influence of film structure on transmittance was correspondence to experiment results.

  6. Microstructure and chemical bond evolution of diamond-like carbon films machined by femtosecond laser

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jing; Wang, Chunhui [Science and Technology on Thermostructure Composite Materials Laboratory, Northwestern Polytechnical University, Xi’an 710072 (China); Liu, Yongsheng, E-mail: yongshengliu@nwpu.edu.cn [Science and Technology on Thermostructure Composite Materials Laboratory, Northwestern Polytechnical University, Xi’an 710072 (China); Cheng, Laifei [Science and Technology on Thermostructure Composite Materials Laboratory, Northwestern Polytechnical University, Xi’an 710072 (China); Li, Weinan [State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi’an 10068 (China); Zhang, Qing [Science and Technology on Thermostructure Composite Materials Laboratory, Northwestern Polytechnical University, Xi’an 710072 (China); Yang, Xiaojun [State Key Laboratory of Transient Optics and Photonics, Xi’an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi’an 10068 (China)

    2015-06-15

    Highlights: • The machining depth was essentially proportional to the laser power. • The well patterned microgrooves and ripple structures with nanoparticles were formed distinctly in the channels. And the number of nanoparticles increased with the processing power as well. • It revealed a conversion from amorphous carbon to nanocrystalline graphite after laser treated with increasing laser power. • It showed that a great decrease of sp{sup 3}/sp{sup 2} after laser treatment. - Abstract: Femtosecond laser is of great interest for machining high melting point and hardness materials such as diamond-like carbon, SiC ceramic, et al. In present work, the microstructural and chemical bond evolution of diamond-like carbon films were investigated using electron microscopy and spectroscopy techniques after machined by diverse femtosecond laser power in air. The results showed the machining depth was essentially proportional to the laser power. The well patterned microgrooves and ripple structures with nanoparticles were formed distinctly in the channels. Considering the D and G Raman band parameters on the laser irradiation, it revealed a conversion from amorphous carbon to nanocrystalline graphite after laser treated with increasing laser power. X-ray photoelectron spectroscopy analysis showed a great decrease of sp{sup 3}/sp{sup 2} after laser treatment.

  7. The effect of diamond-like carbon coating on LiNi0.8Co0.15Al0.05O2 particles for all solid-state lithium-ion batteries based on Li2S-P2S5 glass-ceramics

    Science.gov (United States)

    Visbal, Heidy; Aihara, Yuichi; Ito, Seitaro; Watanabe, Taku; Park, Youngsin; Doo, Seokgwang

    2016-05-01

    There have been several reports on improvements of the performance of all solid-state battery using lithium metal oxide coatings on the cathode active material. However, the mechanism of the performance improvement remains unclear. To better understand the effect of the surface coating, we studied the impact of diamond-like carbon (DLC) coating on LiNi0.8Co0.15Al0.05O2 (NCA) by chemical vapor deposition (CVD). The DLC coated NCA showed good cycle ability and rate performance. This result is further supported by reduction of the interfacial resistance of the cathode and electrolyte observed in impedance spectroscopy. The DLC layer was analyzed by transmission electron microscopy electron energy loss spectroscopy (TEM-EELS). After 100 cycles the sample was analyzed by X-ray photo spectroscopy (XPS), and Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS). These analyses showed that the thickness of the coating layer was around 4 nm on average, acting to hinder the side reactions between the cathode particle and the solid electrolyte. The results of this study will provide useful insights for understanding the nature of the buffer layer for the cathode materials.

  8. Dual-ion-beam deposition of carbon films with diamond-like properties

    Science.gov (United States)

    Mirtich, M. J.; Swec, D. M.; Angus, J. C.

    1985-01-01

    A single and dual ion beam system was used to generate amorphous carbon films with diamond like properties. A methane/argon mixture at a molar ratio of 0.28 was ionized in the low pressure discharge chamber of a 30-cm-diameter ion source. A second ion source, 8 cm in diameter was used to direct a beam of 600 eV Argon ions on the substrates (fused silica or silicon) while the deposition from the 30-cm ion source was taking place. Nuclear reaction and combustion analysis indicate H/C ratios for the films to be 1.00. This high value of H/C, it is felt, allowed the films to have good transmittance. The films were impervious to reagents which dissolve graphitic and polymeric carbon structures. Although the measured density of the films was approximately 1.8 gm/cu cm, a value lower than diamond, the films exhibited other properties that were relatively close to diamond. These films were compared with diamond like films generated by sputtering a graphite target.

  9. Influence of thermal heating on diamond-like carbon film properties prepared by filtered cathodic arc

    Energy Technology Data Exchange (ETDEWEB)

    Khamnualthong, N., E-mail: nattapornkh@gmail.com [Department of Physics, Faculty of Science, King Mongkut' s University of Technology Thonburi, Bangkok, 10140 (Thailand); Western Digital Thailand Co. Ltd, Ayutthaya, 13160 (Thailand); Siangchaew, K. [Western Digital Thailand Co. Ltd, Ayutthaya, 13160 (Thailand); Limsuwan, P. [Department of Physics, Faculty of Science, King Mongkut' s University of Technology Thonburi, Bangkok, 10140 (Thailand); Thailand Center of Excellence in Physics, CHE, Ministry of Education, Bangkok 10400 (Thailand)

    2013-10-01

    Tetrahedral amorphous diamond-like carbon (ta-DLC) films were deposited on magnetic recording heads using the filtered cathodic arc method. The deposited film thickness was on the order of several nanometers. The DLC films were then annealed to 100 °C–300 °C for 30 and 60 min, and the structure of the ta-DLC films was investigated using Raman spectroscopy, where the gross changes were observed in the Raman D and G peaks. Detailed interpretation concluded that there was sp{sup 2} clustering as a function of temperature, and there was no sp{sup 3}-to-sp{sup 2} conversion after heating up to 300 °C. Furthermore, X-ray photoelectron spectroscopy suggested that oxidation of both the ta-DLC film and the adhesion layer occurs at 300 °C. Additionally, more film wear was observed with heating as measured by a nanoindenter. - Highlights: • Tetrahedral-amorphous diamond-like carbon (ta-DLC) by filtered cathodic arc • ta-DLC used in magnetic recording head as head overcoat • ta-DLC thickness range of less than 2 nm • ta-DLC property dependence on heating • Temperature effect range of up to 300 °C.

  10. Synthesis and characterization of boron incorporated diamond-like carbon thin films

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, L.L. [Department of Mechanical Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9 (Canada); Yang, Q., E-mail: qiaoqin.yang@usask.ca [Department of Mechanical Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9 (Canada); Tang, Y.; Yang, L.; Zhang, C. [Department of Mechanical Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, SK S7N 5A9 (Canada); Hu, Y.; Cui, X. [Canadian Light Source Inc., 101 Perimeter Road, Saskatoon, SK S7N 0X4 (Canada)

    2015-08-31

    Boron incorporated diamond-like carbon (B-DLC) (up to 8 wt.% boron) thin films were synthesized on silicon wafers using biased target ion beam deposition technique, where diamond-like carbon (DLC) was deposited by ion beam deposition and boron (B) was simultaneously incorporated by biased target sputtering of a boron carbide (B{sub 4}C) target under different conditions. Pure DLC films and B–C films were also synthesized by ion beam deposition and biased target sputtering of B{sub 4}C under similar conditions, respectively, as reference samples. The microstructure and mechanical properties of the synthesized films have been characterized by various technologies. It has been found that B exists in different states in B-DLC, including carbon-rich and B-rich boron carbides, boron suboxide and boron oxide, and the oxidation of B probably occurs during the film deposition. The incorporation of B into DLC leads to the increase of sp{sup 3} bonded carbon in the films, the increase of both film hardness and elastic modulus, and the decrease of both surface roughness and friction coefficient. Furthermore, the content of sp{sup 3} bonded carbon, film hardness and elastic modulus increase, and the film surface roughness and friction coefficient decrease with the increase of B-rich carbide in the B-DLC films. - Highlights: • Biased target ion beam deposition technique is promising to produce high quality DLC based thin films; • Boron exists in different states in B-DLC thin films; • The incorporation of B to DLC with different levels leads to improved film properties; • The fraction of sp{sup 3} bonded C in B-DLC thin films increase with the increase of B-rich carbide content in the films.

  11. Diamond-Like Carbon Film Deposition Using DC Ion Source with Cold Hollow Cathode

    Directory of Open Access Journals (Sweden)

    E. F. Shevchenko

    2014-01-01

    Full Text Available Carbon diamond-like thin films on a silicon substrate were deposited by direct reactive ion beam method with an ion source based on Penning direct-current discharge system with cold hollow cathode. Deposition was performed under various conditions. The pressure (12–200 mPa and the plasma-forming gas composition consisting of different organic compounds and hydrogen (C3H8, CH4, Si(CH32Cl2, H2, the voltage of accelerating gap in the range 0.5–5 kV, and the substrate temperature in the range 20–850°C were varied. Synthesized films were researched using nanoindentation, Raman, and FTIR spectroscopy methods. Analysis of the experimental results was made in accordance with a developed model describing processes of growth of the amorphous and crystalline carbon materials.

  12. Optical and Electrical Properties Evolution of Diamond-Like Carbon Thin Films with Deposition Temperature

    Institute of Scientific and Technical Information of China (English)

    DING Xu-Li; LI Qing-Shan; KONG Xiang-He

    2009-01-01

    Optical and electrical properties of diamond-like carbon (DLC) films deposited by pulsed laser ablation of graphite target at different substrate temperatures are reported. By varying the deposition temperature from 400 to 25℃, the film optical transparency and electrical resistivity increase severely. Most importantly, the transparency and resistivity properties of the DLC films can be tailored to approaching diamond by adjusting the deposition temperature, which is critical to many applications. DLC films deposited at low temperatures show excellent optical transmittance and high resistivity. Over the same temperature regime an increase of the spa bonded C content is observed using visible Raman spectroscopy, which is responsible for the enhanced transparency and resistivity properties.

  13. Electron-beam induced diamond-like-carbon passivation of plasmonic devices

    Science.gov (United States)

    Balaur, Eugeniu; Sadatnajafi, Catherine; Langley, Daniel; Lin, Jiao; Kou, Shan Shan; Abbey, Brian

    2015-12-01

    Engineered materials with feature sizes on the order of a few nanometres offer the potential for producing metamaterials with properties which may differ significantly from their bulk counterpart. Here we describe the production of plasmonic colour filters using periodic arrays of nanoscale cross shaped apertures fabricated in optically opaque silver films. Due to its relatively low loss in the visible and near infrared range, silver is a popular choice for plasmonic devices, however it is also unstable in wet or even ambient conditions. Here we show that ultra-thin layers of Diamond-Like Carbon (DLC) can be used to prevent degradation due to oxidative stress, ageing and corrosion. We demonstrate that DLC effectively protects the sub-micron features which make up the plasmonic colour filter under both atmospheric conditions and accelerated aging using iodine gas. Through a systematic study we confirm that the nanometre thick DLC layers have no effect on the device functionality or performance.

  14. Stress reduction of Cu-doped diamond-like carbon films from ab initio calculations

    Directory of Open Access Journals (Sweden)

    Xiaowei Li

    2015-01-01

    Full Text Available Structure and properties of Cu-doped diamond-like carbon films (DLC were investigated using ab initio calculations. The effect of Cu concentrations (1.56∼7.81 at.% on atomic bond structure was mainly analyzed to clarify the residual stress reduction mechanism. Results showed that with introducing Cu into DLC films, the residual compressive stress decreased firstly and then increased for each case with the obvious deterioration of mechanical properties, which was in agreement with the experimental results. Structural analysis revealed that the weak Cu-C bond and the relaxation of both the distorted bond angles and bond lengths accounted for the significant reduction of residual compressive stress, while at the higher Cu concentration the increase of residual stress attributed to the existence of distorted Cu-C structures and the increased fraction of distorted C-C bond lengths.

  15. Stress reduction of Cu-doped diamond-like carbon films from ab initio calculations

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xiaowei; Ke, Peiling; Wang, Aiying, E-mail: aywang@nimte.ac.cn [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China)

    2015-01-15

    Structure and properties of Cu-doped diamond-like carbon films (DLC) were investigated using ab initio calculations. The effect of Cu concentrations (1.56∼7.81 at.%) on atomic bond structure was mainly analyzed to clarify the residual stress reduction mechanism. Results showed that with introducing Cu into DLC films, the residual compressive stress decreased firstly and then increased for each case with the obvious deterioration of mechanical properties, which was in agreement with the experimental results. Structural analysis revealed that the weak Cu-C bond and the relaxation of both the distorted bond angles and bond lengths accounted for the significant reduction of residual compressive stress, while at the higher Cu concentration the increase of residual stress attributed to the existence of distorted Cu-C structures and the increased fraction of distorted C-C bond lengths.

  16. Tribological Characteristic of Diamond-like Carbon Films Investigated by Lateral Force Microscope

    Institute of Scientific and Technical Information of China (English)

    DINGJian-ning; ZHUShou-xing; FANZhen; LIChang-sheng; CAILan; YANGJi-chang

    2004-01-01

    Tribological characteristic of different thick diamond- like carbon (DLC) fihns was stymied. A geometrical method was applied to calibrate the cantilever spring constant and to calculate tbe normal and lateral forces, respectively. Experimental results show that the lateral force under different applied loads is proportional to the normal force for the DLC films with the thickness of 153.4nm and 64.9nm. However, for the thickness of 4.48nm and 2.78nm DLC films, lateral force is nonlinear to normal force, which is opposed to the Amonton's law. The single asperity regime and the DMT model were put forward to predict the possible nanotribological mecb-anism between the probe and DLC film.

  17. Role of atomic transverse migration in growth of diamond-like carbon films

    Institute of Scientific and Technical Information of China (English)

    Ma Tian-Bao; Hu Yuan-Zhong; Wang Hui

    2007-01-01

    The growth of diamond-like carbon (DLC) films is studied using molecular dynamics simulations. The effect of impact angle on film structure is carefully studied, which shows that the transverse migration of the incident atoms is the main channel of film relaxation. A transverse-migration-induced film relaxation model is presented to elucidate the process of film relaxation which advances the original model of subplantation. The process of DLC film growth on a rough surface is also investigated, as well as the evolution of microstructure and surface morphology of the film. A preferential-to-homogeneous growth mode and a smoothing of the film are observed, which are due to the transverse migration of the incident atoms.

  18. Properties of Diamond-Like Carbon Films Synthesized by Dual-Target Unbalanced Magnetron Sputtering

    Institute of Scientific and Technical Information of China (English)

    LIU Cui; LI Guo-Qing; GOU Wei; MU Zong-Xin; ZHANG Cheng-Wu

    2004-01-01

    @@ Smooth, dense and uniform diamond-like carbon films (DLC films) for industrial applications have successfully been prepared by dual-target unbalanced magnetron sputtering and the DLC characteristics of the films are confirmed by Raman spectra. It is found that the sputtering current of target plays an important role in the DLC film deposition. Deposition rate of 3.5μm/h is obtained by using the sputtering current of 30 A. The friction coefficient of the films is 0.2-0.225 measured by using a pin-on-disc microtribometer. The structure of the films tends to have a growth of sp3 bonds content at high sputtering current. The compressive residual stress in the films increases with the increasing sputtering current of the target.

  19. Fabrication of Diamond-like Carbon Films by Ion Assisted Middle Frequency Unbalanced Magnetron Sputtering

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yi-chen; SUN Shao-ni; ZHOU Yi; MA Sheng-ge; BA De-chun

    2006-01-01

    Diamond-like carbon (DLC) films are deposited by the Hall ion source assisted by the mid-frequency unbalanced magnetron sputtering technique. The effects of the substrate voltage bias, the substrate temperature, the Hall discharging current and the argon/nitrogen ratio on the DLC film's performance were studied. The experimental results show that the film's surface roughness, the hardness and the Young's modulus increase firstly and then decrease with the bias voltage incrementally increases. Also when the substrate temperature rises, the surface roughness of the film varies slightly, but its hardness and Young's modulus firstly increase followed by a sharp decrease when the temperature surpassing 120 ℃. With the Hall discharging current incrementally rising, the hardness and Young's modulus of the film decrease and the surface roughness of the film on 316L stainless steel firstly decreased and then remains constant.

  20. Kinetics and thermodynamics of human serum albumin adsorption on silicon doped diamond like carbon

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, Mukhtar H., E-mail: ahmed-m@email.ulster.ac.uk; Byrne, John A.; McLaughlin, James

    2015-03-15

    To gain a better understanding of protein adsorption onto biomaterial surfaces is required for the control of biocompatibility and bioactivity. Various samples of diamond like carbon (DLC) and silicon-doped DLC were synthesised using plasma enhanced chemical vapour deposition (PECVD). The effects of surface morphology on the interaction of human serum albumin (HSA) with doped and undoped DLC films was investigated using spectroscopic ellipsometry (SE) and other surface analysis techniques. The results highlighted an increase in both contact angle and hydrophobicity with increasing silicon dopant levels. A reduction on the contact angle values. After adsorption of HSA, the films showed a reduction in the contact angle with a significant change in the cosΔ and this gap increased with increasing surface coverage of HSA. The adsorption kinetics of HSA were also investigated and revealed that the maximum adsorption occurred at pH 5.0 and the process involved chemisorption. The experimental isotherm data were analysed using the Langmuir and Freundlich‎ models. The amount of HSA adsorbed increased with contact time and reached saturation ‎after 30 min. The adsorption ‎process was found to be pseudo first order with respect to the bulk concentration and was dependent on both the concentration of protein and surface characteristics of the samples. The amount of adsorbed HSA was higher with higher levels of silicon doping of the DLC. Therefore, doping DLC may provide an approach to controlling the protein adsorption. - Graphical abstract: The average thickness layer of HSA measurement onto surfaces of DLC and Si-DLC. - Highlights: • Diamond Like Carbon (DLC) and Silicon doped DLC were synthesised and characterised. • Si-DLC increases the hydrophobicity and decreases the surface free energy. • Adsorption study using human serum albumin (HSA). • The adsorbed amount of HSA increases with increasing of Silicon content DLC. • Adsorption process follow pseudo

  1. Modification of diamond-like carbon films by nitrogen incorporation via plasma immersion ion implantation

    Energy Technology Data Exchange (ETDEWEB)

    Flege, S., E-mail: flege@ca.tu-darmstadt.de [Materials Science, Technische Universität Darmstadt, Alarich-Weiss-Str. 2, 64287 Darmstadt (Germany); Hatada, R.; Hoefling, M.; Hanauer, A.; Abel, A. [Materials Science, Technische Universität Darmstadt, Alarich-Weiss-Str. 2, 64287 Darmstadt (Germany); Baba, K. [Industrial Technology Center of Nagasaki, Applied Technology Division, Omura, Nagasaki 856-0026 (Japan); Ensinger, W. [Materials Science, Technische Universität Darmstadt, Alarich-Weiss-Str. 2, 64287 Darmstadt (Germany)

    2015-12-15

    Highlights: • Nitrogen containing diamond-like carbon films were prepared by a plasma ignited by a high voltage. • Variation of preparation method (N{sub 2} implantation, N{sub 2} and C{sub 2}H{sub 4} co-deposition). • Maximum nitrogen content similar for co-deposition and implantation. • Electrical resistivity decreases for small nitrogen contents, increases again for higher contents. - Abstract: The addition of nitrogen to diamond-like carbon films affects properties such as the inner stress of the film, the conductivity, biocompatibility and wettability. The nitrogen content is limited, though, and the maximum concentration depends on the preparation method. Here, plasma immersion ion implantation was used for the deposition of the films, without the use of a separate plasma source, i.e. the plasma was generated by a high voltage applied to the samples. The plasma gas consisted of a mixture of C{sub 2}H{sub 4} and N{sub 2}, the substrates were silicon and glass. By changing the experimental parameters (high voltage, pulse length and repetition rate and gas flow ratio) layers with different N content were prepared. Additionally, some samples were prepared using a DC voltage. The nitrogen content and bonding was investigated with SIMS, AES, XPS, FTIR and Raman spectroscopy. Their influence on the electrical resistivity of the films was investigated. Depending on the preparation conditions different nitrogen contents were realized with maximum contents around 11 at.%. Those values were compared with the nitrogen concentration that can be achieved by implantation of nitrogen into a DLC film.

  2. High performance diamond-like carbon layers obtained by pulsed laser deposition for conductive electrode applications

    Science.gov (United States)

    Stock, F.; Antoni, F.; Le Normand, F.; Muller, D.; Abdesselam, M.; Boubiche, N.; Komissarov, I.

    2017-09-01

    For the future, one of the biggest challenge faced to the technologies of flat panel display and various optoelectronic and photovoltaic devices is to find an alternative to the use of transparent conducting oxides like ITO. In this new approach, the objective is to grow high conductive thin-layer graphene (TLG) on the top of diamond-like carbon (DLC) layers presenting high performance. DLC prepared by pulsed laser deposition (PLD) have attracted special interest due to a unique combination of their properties, close to those of monocrystalline diamond, like its transparency, hardness and chemical inertia, very low roughness, hydrogen-free and thus high thermal stability up to 1000 K. In our future work, we plane to explore the synthesis of conductive TLG on top of insulating DLC thin films. The feasibility and obtained performances of the multi-layered structure will be explored in great details in the short future to develop an alternative to ITO with comparable performance (conductivity of transparency). To select the best DLC candidate for this purpose, we focus this work on the physicochemical properties of the DLC thin films deposited by PLD from a pure graphite target at two wavelengths (193 and 248 nm) at various laser fluences. A surface graphenization process, as well as the required efficiency of the complete structure (TLG/DLC) will clearly be related to the DLC properties, especially to the initial sp3/sp2 hybridization ratio. Thus, an exhaustive description of the physicochemical properties of the DLC layers is a fundamental step in the research of comparable performance to ITO.

  3. Surface properties of diamond-like carbon films prepared by CVD and PVD methods

    Institute of Scientific and Technical Information of China (English)

    Liu Dong-Ping; Liu Yan-Hong; Chen Bao-Xiang

    2006-01-01

    Diamond-like carbon (DLC) films have been deposited using three different techniques: (a) electron cyclotron resonance-plasma source ion implantation, (b) low-pressure dielectric barrier discharge, (c) filtered-pulsed cathodic arc discharge. The surface and mechanical properties of these films are compared using atomic force microscopebased tests. The experimental results show that hydrogenated DLC films are covered with soft surface layers enriched with hydrogen and sp3 hybridized carbon while the soft surface layers of tetrahedral amorphous carbon (ta-C) films have graphite-like structure. The formation of soft surface layers can be associated with the surface diffusion and growth induced by the low-energy deposition process. For typical CVD methods, the atomic hydrogen in the plasmas can contribute to the formation of hydrogen and sp3 hybridized carbon enriched surface layers. The high-energy ion implantation causes the rearrangement of atoms beneath the surface layer and leads to an increase in film density. The ta-C films can be deposited using the medium energy carbon ions in the highly-ionized plasma.

  4. On the nature of the coefficient of friction of diamond-like carbon films deposited on rubber

    NARCIS (Netherlands)

    Martinez-Martinez, D.; van der Pal, J. P.; Schenkel, M.; Shaha, K. P.; Pei, Y. T.; De Hosson, J. Th M.

    2012-01-01

    In this paper, the nature of the coefficient of friction (CoF) of diamond-like carbon (DLC)-protected rubbers is studied. The relative importance of the viscoelastic and adhesive contributions to the overall friction is evaluated experimentally by modifying the contact load and the adhesive strength

  5. Flexible diamond-like carbon films on rubber : On the origin of self-acting segmentation and film flexibility

    NARCIS (Netherlands)

    Pei, Y.T.; Bui, X.L.; Pal, J.P. van der; Martinez-Martinez, D.; Zhou, X.B.; Hosson, J.Th.M. De

    2012-01-01

    This paper reports an experimental approach to deposit flexible diamond-like carbon (DLC) films on hydrogenated nitrile butadiene rubber (HNBR) with plasma-assisted chemical vapor deposition and an analytical model to describe the self-segmentation mechanism of the DLC films. By making use of the su

  6. Adhesion improvement of hydrogenated diamond-like carbon thin films by pre-deposition plasma treatment of rubber substrate

    NARCIS (Netherlands)

    Bui, X.L.; Pei, Y.T.; Mulder, E.D.G.; Hosson, J.Th.M. De

    2009-01-01

    For reduction of friction and enhancement of wear resistance of dynamic rubber seals, thin films of hydrogenated diamond-like carbon (DLC) have been deposited on hydrogenated nitrile butadiene rubber (HNBR) via magnetron-enhanced plasma chemical vapor deposition (ME-PCVD). Pre-deposition plasma trea

  7. Electrochemical performance of porous diamond-like carbon electrodes for sensing hormones, neurotransmitters, and endocrine disruptors.

    Science.gov (United States)

    Silva, Tiago A; Zanin, Hudson; May, Paul W; Corat, Evaldo J; Fatibello-Filho, Orlando

    2014-12-10

    Porous diamond-like carbon (DLC) electrodes have been prepared, and their electrochemical performance was explored. For electrode preparation, a thin DLC film was deposited onto a densely packed forest of highly porous, vertically aligned multiwalled carbon nanotubes (VACNT). DLC deposition caused the tips of the carbon nanotubes to clump together to form a microstructured surface with an enlarged surface area. DLC:VACNT electrodes show fast charge transfer, which is promising for several electrochemical applications, including electroanalysis. DLC:VACNT electrodes were applied to the determination of targeted molecules such as dopamine (DA) and epinephrine (EP), which are neurotransmitters/hormones, and acetaminophen (AC), an endocrine disruptor. Using simple and low-cost techniques, such as cyclic voltammetry, analytical curves in the concentration range from 10 to 100 μmol L(-1) were obtained and excellent analytical parameters achieved, including high analytical sensitivity, good response stability, and low limits of detection of 2.9, 4.5, and 2.3 μmol L(-1) for DA, EP, and AC, respectively.

  8. Molecular dynamics simulation of the deposition process of hydrogenated diamond-like carbon (DLC) films

    Institute of Scientific and Technical Information of China (English)

    ZHANG YuJun; DONG GuangNeng; MAO JunHong; XIE YouBai

    2008-01-01

    The deposition process of hydrogenated diamond-like carbon (DLC) film greatly affects its frictional properties. In this study, CH3 radicals are selected as source species to deposit hydrogenated DLC films for molecular dynamics simulation. The growth and structural properties of hydrogenated DLC films are investigated and elucidated in detail. By comparison and statistical analysis, the authors find that the ratio of carbon to hydrogen in the films generally shows a monotonously increasing trend with the increase of impact energy. Carbon atoms are more reactive during deposition and more liable to bond with substrate atoms than hydrogen atoms. In addition, there exists a peak value of the number of hydrogen atoms deposited in hydrogenated DLC films. The trends of the variation are opposite on the two sides of this peak point, and itbecomes stable when impact energy is greater than 80 eV. The average relative density also indicates a rising trend along with the increment of impact energy, while it does not reach the saturation value until impact energy comes to 50 eV. The hydrogen content in source species is a key factor to determine the hydrogen content in hydrogenated DLC films. When the hydrogen content in source species is high, the hydrogen content in hydrogenated DLC films is accordingly high.

  9. Target-plane deposition of diamond-like carbon in pulsed laser ablation of graphite

    Energy Technology Data Exchange (ETDEWEB)

    Yap, S.S. [Faculty of Engineering, Multimedia University, 63100 Cyberjaya, Selangor (Malaysia); Tou, T.Y. [Faculty of Engineering, Multimedia University, 63100 Cyberjaya, Selangor (Malaysia)], E-mail: tytou@mmu.edu.my

    2007-10-15

    In pulsed Nd:YAG laser ablation of highly oriented pyrolytic graphite (HOPG) at 10{sup -6} Torr, diamond-like carbon (DLC) are deposited at laser wavelengths of 1064, 532, and 355 nm on substrates placed in the target-plane. These target-plane samples are found to contain varying sp{sup 3} content and composed of nanostructures of 40-200 nm in size depending on the laser wavelength and laser fluence. The material and origin of sp{sup 3} in the target-plane samples is closely correlated to that in the laser-modified HOPG surface layer, and hardly from the backward deposition of ablated carbon plume. The surface morphology of the target-plane samples shows the columnar growth and with a tendency for agglomeration between nanograins, in particular for long laser wavelength at 1064 nm. It is also proposed that DLC formation mechanism at the laser-ablated HOPG is possibly via the laser-induced subsurface melting and resolidification.

  10. Structural and mechanical properties of diamond-like carbon films deposited by direct current magnetron sputtering

    Science.gov (United States)

    Broitman, E.; Hellgren, N.; Czigány, Zs.; Twesten, R. D.; Luning, J.; Petrov, I.; Hultman, L.; Holloway, B. C.

    2003-07-01

    The microstructure, morphology, and mechanical properties of diamond-like carbon (DLC) films deposited by direct current magnetron sputtering were investigated for microelectromechanical systems applications. Film properties were found to vary markedly with the ion energy (Eion) and ion-to-carbon flux ratio (Jion/JC). Cross-sectional high-resolution transmission electron microscopy revealed an amorphous microstructure. However, the presence of nanometer-sized domains at Eion~85 eV was detected. Film stresses, σ, which were compressive in all cases, ranged from 0.5 to 3.5 GPa and depended on the flux ratio as well as ion energy. The hardness (H), Young's moduli (ɛ), and elastic recovery (R) increased with Eion to maximum values of H=27 GPa, ɛ=250 GPa, and R=68% at Eion=85 eV and Jion/JC=4.4. However, near edge x-ray absorption fine structure and electron energy-loss spectrum analysis showed that the sp2/sp3 content of the films does not change with Eion or Jion/JC. The measured change in mechanical properties without a corresponding change in sp2/sp3 ratio is not consistent with any previously published models. We suggest that, in the ranges 5 eV <=Eion<=85 eV and 1.1 <=Jion/JC<=6.8, the presence of defective graphite formed by subplanted C and Ar atoms has the dominant influence on the mechanical properties of DLC films.

  11. Synthesis of flat sticky hydrophobic carbon diamond-like films using atmospheric pressure Ar/CH4 dielectric barrier discharge

    Science.gov (United States)

    Rincón, R.; Hendaoui, A.; de Matos, J.; Chaker, M.

    2016-06-01

    An Ar/CH4 atmospheric pressure dielectric barrier discharge (AP-DBD) was used to synthesize sticky hydrophobic diamond-like carbon (DLC) films on glass surface. The film is formed with plasma treatment duration shorter than 30 s, and water contact angles larger than 90° together with contact angle hysteresis larger than 10° can be achieved. According to Fourier transform infrared spectroscopy and atomic force microscopy analysis, hydrocarbon functional groups are created on the glass substrate, producing coatings with low surface energy (˜35 mJ m-2) with no modification of the surface roughness. To infer the plasma processes leading to the formation of low energy DLC surfaces, optical emission spectroscopy was used. From the results, a direct relationship between the CH species present in the plasma and the carbon concentration in the hydrophobic layer was found, which suggests that the CH species are the precursors of DLC film growth. Additionally, the plasma gas temperature was measured to be below 350 K which highlights the suitability of using AP-DBD to treat thermo-sensitive surfaces.

  12. Conditions for forming composite carbon nanotube-diamond like carbon material that retain the good properties of both materials

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Wei, E-mail: wei.ren@helsinki.fi; Avchaciov, Konstantin; Nordlund, Kai [Department of Physics, University of Helsinki, P.O. Box 43, FIN-00014 Helsinki (Finland); Iyer, Ajai; Koskinen, Jari [Department of Materials Science and Engineering, School of Chemical Technology, Aalto University, P.O. Box 16200, 00076 Espoo (Finland); Kaskela, Antti; Kauppinen, Esko I. [NanoMaterials Group, Department of Applied Physics, Aalto University School of Science, P.O. Box 15100, 00076 Aalto (Finland)

    2015-11-21

    Carbon nanotubes are of wide interest due to their excellent properties such as tensile strength and electrical and thermal conductivity, but are not, when placed alone on a substrate, well resistant to mechanical wear. Diamond-like carbon (DLC), on the other hand, is widely used in applications due to its very good wear resistance. Combining the two materials could provide a very durable pure carbon nanomaterial enabling to benefit from the best properties of both carbon allotropes. However, the synthesis of high-quality diamond-like carbon uses energetic plasmas, which can damage the nanotubes. From previous works it is neither clear whether the quality of the tubes remains good after DLC deposition, nor whether the DLC above the tubes retains the high sp{sup 3} bonding fraction. In this work, we use experiments and classical molecular dynamics simulations to study the mechanisms of DLC formation on various carbon nanotube compositions. The results show that high-sp{sup 3}-content DLC can be formed provided the deposition conditions allow for sidewards pressure to form from a substrate close beneath the tubes. Under optimal DLC formation energies of around 40–70 eV, the top two nanotube atom layers are fully destroyed by the plasma deposition, but layers below this can retain their structural integrity.

  13. Conditions for forming composite carbon nanotube-diamond like carbon material that retain the good properties of both materials

    Science.gov (United States)

    Ren, Wei; Iyer, Ajai; Koskinen, Jari; Kaskela, Antti; Kauppinen, Esko I.; Avchaciov, Konstantin; Nordlund, Kai

    2015-11-01

    Carbon nanotubes are of wide interest due to their excellent properties such as tensile strength and electrical and thermal conductivity, but are not, when placed alone on a substrate, well resistant to mechanical wear. Diamond-like carbon (DLC), on the other hand, is widely used in applications due to its very good wear resistance. Combining the two materials could provide a very durable pure carbon nanomaterial enabling to benefit from the best properties of both carbon allotropes. However, the synthesis of high-quality diamond-like carbon uses energetic plasmas, which can damage the nanotubes. From previous works it is neither clear whether the quality of the tubes remains good after DLC deposition, nor whether the DLC above the tubes retains the high sp3 bonding fraction. In this work, we use experiments and classical molecular dynamics simulations to study the mechanisms of DLC formation on various carbon nanotube compositions. The results show that high-sp3-content DLC can be formed provided the deposition conditions allow for sidewards pressure to form from a substrate close beneath the tubes. Under optimal DLC formation energies of around 40-70 eV, the top two nanotube atom layers are fully destroyed by the plasma deposition, but layers below this can retain their structural integrity.

  14. Spectroscopic studies on diamond like carbon films synthesized by pulsed laser ablation

    Energy Technology Data Exchange (ETDEWEB)

    Panda, Madhusmita; Krishnan, R., E-mail: krish@igcar.gov.in; Ravindran, T. R.; Das, Arindam; Mangamma, G.; Dash, S.; Tyagi, A. K. [Material Science Group, Indira Gandhi Centre for Atomic Research, Kalpakkam - 603102, Tamil Nadu (India)

    2016-05-23

    Hydrogen free Diamond like Carbon (DLC) thin films enriched with C-C sp{sup 3} bonding were grown on Si (111) substrates at laser pulse energies varying from 100 to 400 mJ (DLC-100, DLC-200, DLC-300, DLC-400), by Pulsed Laser Ablation (PLA) utilizing an Nd:YAG laser operating at fundamental wavelength. Structural, optical and morphological evolutions as a function of laser pulse energy were studied by micro Raman, UV-Vis spectroscopic studies and Atomic Force Microscopy (AFM), respectively. Raman spectra analysis provided critical clues for the variation in sp{sup 3} content and optical energy gap. The sp{sup 3} content was estimated using the FWHM of the G peak and found to be in the range of 62-69%. The trend of evolution of sp{sup 3} content matches well with the evolution of I{sub D}/I{sub G} ratio with pulse energy. UV-Vis absorption study of DLC films revealed the variation of optical energy gap with laser pulse energy (1.88 – 2.23 eV), which matches well with the evolution of G-Peak position of the Raman spectra. AFM study revealed that roughness, size and density of particulate in DLC films increase with laser pulse energy.

  15. The nano-scratch behaviour of different diamond-like carbon film-substrate systems

    Energy Technology Data Exchange (ETDEWEB)

    Huang Liye [State-Key Laboratory for Mechanical Behaviour of Materials, Xi' an Jiaotong University, Xi' an, 710049 (China); Lu Jian [LASMIS, Universite de Technologie de Troyes, 10010 Troyes (France); Xu Kewei [State-Key Laboratory for Mechanical Behaviour of Materials, Xi' an Jiaotong University, Xi' an, 710049 (China)

    2004-08-07

    The nano-scratch behaviour of diamond-like carbon films on a Ti alloy and Si substrate was evaluated. For both samples, three processes-fully elastic recovery, plastic deformation, and delamination and pulling-off of the films, occur successively with increasing load during scratching. The loads (Lc{sub L}) corresponding to the peeling-off of the films during the up-loading were 75 and 70 mN for Ti alloy and Si. However, the films on Si were delaminated during unloading, and the relevant load (Lc{sub U}) was only 45 mN. This probably originates from the distribution status of the plastic deformation both in the films and the substrates. Therefore, the nano-scratch test can be applied not only to obtain the cracking resistance (Lc{sub L}) characterizing the cohesion strength of films during up-loading but also to determine the delamination resistance (Lc{sub U}) related to the adhesion strength of the film-substrate during unloading.

  16. Annealing Effects on Structure and Optical Properties of Diamond-Like Carbon Films Containing Silver.

    Science.gov (United States)

    Meškinis, Šarūnas; Čiegis, Arvydas; Vasiliauskas, Andrius; Šlapikas, Kęstutis; Gudaitis, Rimantas; Yaremchuk, Iryna; Fitio, Volodymyr; Bobitski, Yaroslav; Tamulevičius, Sigitas

    2016-12-01

    In the present study, diamond-like carbon films with embedded Ag nanoparticles (DLC:Ag) were deposited by reactive magnetron sputtering. Structure of the films was investigated by Raman scattering spectroscopy. Atomic force microscopy was used to define thickness of DLC:Ag films as well as to study the surface morphology and size distribution of Ag nanoparticles. Optical absorbance and reflectance spectra of the films were studied in the 180-1100-nm range. Air annealing effects on structure and optical properties of the DLC:Ag were investigated. Annealing temperatures were varied in the 180-400 °C range. Changes of size and shape of the Ag nanoclusters took place due to agglomeration. It was found that air annealing of DLC:Ag films can result in graphitization following destruction of the DLC matrix. Additional activation of surface-enhanced Raman scattering (SERS) effect in DLC:Ag films can be achieved by properly selecting annealing conditions. Annealing resulted in blueshift as well as significant narrowing of the plasmonic absorbance and reflectance peaks. Moreover, quadrupole surface plasmon resonance peaks appeared. Modeling of absorption spectra of the nanoclusters depending on the shape and surrounding media has been carried out.

  17. Strength and Fracture Resistance of Amorphous Diamond-Like Carbon Films for MEMS

    Directory of Open Access Journals (Sweden)

    K. N. Jonnalagadda

    2009-01-01

    Full Text Available The mechanical strength and mixed mode I/II fracture toughness of hydrogen-free tetrahedral amorphous diamond-like carbon (ta-C films, grown by pulsed laser deposition, are discussed in connection to material flaws and its microstructure. The failure properties of ta-C were obtained from films with thicknesses 0.5–3 μm and specimen widths 10–20 μm. The smallest test samples with 10 μm gage section averaged a strength of 7.3 ± 1.2 GPa, while the strength of 20-μm specimens with thicknesses 0.5–3 μm varied between 2.2–5.7 GPa. The scaling of the mechanical strength with specimen thickness and dimensions was owed to deposition-induced surface flaws, and, only in the smallest specimens, RIE patterning generated specimen sidewall flaws. The mode I fracture toughness of ta-C films is KIc=4.4±0.4 MPam, while the results from mixed mode I/II fracture experiments with cracks arbitrarily oriented in the plane of the film compared very well with theoretical predictions.

  18. Characterization of boron doped diamond-like carbon film by HRTEM

    Energy Technology Data Exchange (ETDEWEB)

    Li, X.J., E-mail: lixj@alum.imr.ac.cn [College of Material Science and Engineering, Key Laboratory of Advanced Structural Materials, Ministry of Education, Changchun University of Technology, Changchun 130012 (China); He, L.L., E-mail: llhe@imr.ac.cn [Shenyang National Lab of Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016 (China); Li, Y.S. [Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9 (Canada); Plasma Physics Laboratory, University of Saskatchewan, Saskatoon, SK S7N 5E2 (Canada); Yang, Q. [Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, SK S7N 5A9 (Canada); Hirose, A. [Plasma Physics Laboratory, University of Saskatchewan, Saskatoon, SK S7N 5E2 (Canada)

    2015-12-01

    Graphical abstract: - Highlights: • The microstructure of B-DLC film is studied by HRTEM in cross-sectional observation. • Many crystalline nanoparticles dispersed in the amorphous matrix film are observed. • Through composition and structure analysis, the nanoparticles are identified as B{sub 2}O. • The work implies the doped B element exists as oxide state in the B-DLC film. - Abstract: Boron doped diamond-like carbon (B-DLC) film was synthesized on silicon (1 0 0) wafer by biased target ion beam deposition. High-resolution transmission electron microscopy (HRTEM) is employed to investigate the microstructure of the B-DLC thin film in cross-sectional observation. Many crystalline nanoparticles randomly dispersed and embedded in the amorphous matrix film are observed. Through chemical compositional analysis of the B-DLC film, some amount of O element is confirmed to be contained. And also, some nanoparticles with near zone axes are indexed, which are accordance with B{sub 2}O phase. Therefore, the contained O element causing the B element oxidized is proposed, resulting in the formation of the nanoparticles. Our work indicates that in the B-DLC film a significant amount of the doped B element exists as boron suboxide nanoparticles.

  19. Effects of diamond-like carbon thin film in organic light emitting devices

    Energy Technology Data Exchange (ETDEWEB)

    Yap, Seong-Shan; Yong, Thian-Khok [Faculty of Engineering, Multimedia University, Cyberjaya, 63100 Selangor (Malaysia); Tou, Teck-Yong, E-mail: tytou@mmu.edu.m [Faculty of Engineering, Multimedia University, Cyberjaya, 63100 Selangor (Malaysia)

    2009-07-01

    Ultrathin diamond-like carbon (DLC) was deposited by pulsed Nd:YAG laserablation of graphite target on the indium tin oxide (ITO) surface that functioned as the buffered anode for single-layer organic light emitting devices (OLEDs). Deposited by 355 nm Nd:YAG laser, DLC films were characterized by the Raman spectroscopy and the bulk resistivity measurement. Insertion of DLC in the hole-transport ITO/DLC/TPD/Al device slightly increased the injection current density and reduced the turn-on voltage. But DLC insertion in the electron-transport ITO/DLC/Alq{sub 3}/Al device greatly decreased the injection current density and increased the turn-on voltage. For the ITO/DLC/(TPD + Alq{sub 3} + PVK)/Al device, that was doped with Alq{sub 3} and TPD, improved performance with a higher current density and brightness were consistently obtained. Possible mechanisms for the DLC effect in these single-layer devices were discussed.

  20. Synthesis and Characteristics of Diamond-like Carbon Films Deposited on Quartz Substrate

    Institute of Scientific and Technical Information of China (English)

    黄卫东; 丁鼎; 詹如娟

    2004-01-01

    Diamond-like carbon (DLC) films are deposited on quartz substrate using pure CH4 in the surface wave plasma equipment. A direct current negative bias up to -90 V is applied to the substrate to investigate the bias effect on the film characteristics. Deposited films are characterized by Raman spectroscopy, infrared (IR) and ultraviolet-visible absorption techniques.There are two broad Raman peaks around 1340 cm-1 and 1600 cm-1 and the first one has a greater sp3 component with an increased bias. Infrared spectroscopy has three sp3 C-H modes at 2852 cm-1, 2926 cm- 1 and 2962 cm-1, respectively and also shows an intensity increase with the negative bias. Optical band gap is calculated from the ultraviolet-visible absorption spectroscopy and the increased values with negative bias and deposition time are obtained. After a thermal anneal at about 500 ℃ for an hour to the film deposited under the bias of-90 V, we get an almost unchanged Raman spectrum and a peak intensity-reduced IR signal, which indicates a reduced H-content in the film. Meanwhile the optical band gap changed from 0.85 eV to 1.5 eV.

  1. Collision cascades enhanced hydrogen redistribution in cobalt implanted hydrogenated diamond-like carbon films

    Science.gov (United States)

    Gupta, P.; Becker, H.-W.; Williams, G. V. M.; Hübner, R.; Heinig, K.-H.; Markwitz, A.

    2017-03-01

    Hydrogenated diamond-like carbon films produced by C3H6 deposition at 5 kV and implanted at room temperature with 30 keV Co atoms to 12 at.% show not only a bimodal distribution of Co atoms but also a massive redistribution of hydrogen in the films. Resonant nuclear reaction analysis was used to measure the hydrogen depth profiles (15N-method). Depletion of hydrogen near the surface was measured to be as low as 7 at.% followed by hydrogen accumulation from 27 to 35 at.%. A model is proposed considering the thermal energy deposited by collision cascade for thermal insulators. In this model, sufficient energy is provided for dissociated hydrogen to diffuse out of the sample from the surface and diffuse into the sample towards the interface which is however limited by the range of the incoming Co ions. At a hydrogen concentration of ∼35 at.%, the concentration gradient of the mobile unbounded hydrogen atoms is neutralised effectively stopping diffusion towards the interface. The results point towards new routes of controlling the composition and distribution of elements at the nanoscale within a base matrix without using any heat treatment methods. Exploring these opportunities can lead to a new horizon of materials and device engineering needed for enabling advanced technologies and applications.

  2. Influence of Third Particle on the Tribological Behaviors of Diamond-like Carbon Films

    Science.gov (United States)

    Bai, Lichun; Srikanth, Narasimalu; Kang, Guozheng; Zhou, Kun

    2016-12-01

    Tribological mechanisms of diamond-like carbon (DLC) films in a sand-dust environment are commonly unclear due to the complicated three-body abrasion caused by sand particles. This study investigates the three-body abrasion of the DLC film via molecular dynamics simulations. The influence factors such as the load, velocity, shape of the particle and its size are considered. It has been found that the friction and wear of the DLC film are determined by adhesion at a small load but dominated by both adhesion and plowing at a large load. A high velocity can increase the friction of the DLC film but decrease its wear, due to the response of its networks to a high strain rate indicated by such velocity. The shape of the particle highly affects its movement mode and thus changes the friction and wear of the DLC film. It is found that a small-sized particle can increase the friction and wear of the DLC film by enhancing plowing. These unique tribological mechanisms of the DLC film can help to promote its wide applications in a sand-dust environment.

  3. Negative Resistance Effect and Charge Transfer Mechanisms in the lon Beam Deposited Diamond Like Carbon Superlattices

    Directory of Open Access Journals (Sweden)

    Andrius VASILIAUSKAS

    2011-03-01

    Full Text Available In the present study DLC:SiOx/DLC/DLC:SiOx/nSi and DLC:SiOx/DLC/DLC:SiOx/pSi structures were fabricated by ion beam deposition using a closed drift ion source. Current-voltage (I-V characteristics of the multilayer samples were measured at room temperature. The main charge transfer mechanisms were considered. Unstable negative resistance effect was observed for some DLC:SiOx/DLC/DLC:SiOx/nSi and DLC:SiOx/DLC/DLC:SiOx/pSi structures. In the case of the diamond like carbon superlattices fabricated on nSi it was observed only during the first measurement. In the case of the some DLC:SiOx/DLC/DLC:SiOx/pSi negative resistance "withstood" several measurements. Changes of the charge carrier mechanisms were observed along with the dissapear of the negative resistance peaks. It seems, that in such a case influence of the bulk related charge transfer mechanisms such as Poole-Frenkel emission increased, while the influence of the contact limited charge transfer mechanisms such as Schottky emission decreased. Observed results were be explained by current flow through the local microconducting channels and subsequent destruction of the localized current pathways as a result of the heating by flowing electric current.http://dx.doi.org/10.5755/j01.ms.17.1.240

  4. Preparation of Diamond-like Carbon Films on the Surface of Ti Alloy by Electro-deposition

    Institute of Scientific and Technical Information of China (English)

    Fenglei SHEN; Hongwei WANG; Dijiang WEN

    2004-01-01

    In this paper, diamond-like carbon (DLC) fi[ms were deposited on Ti alloy by electro-deposition. DLC films were brown and composed of the compact grains whose diameter was about 400 nm. Examined by XPS, the main composition of the films was carbon. In the Raman spectrum, there were a broad peak at 1350 cm-1 and a broad peak at 1600 cm-1, which indicated that the films were DLC films.

  5. Antimicrobial Properties of Diamond-Like Carbon/Silver Nanocomposite Thin Films Deposited on Textiles: Towards Smart Bandages

    Directory of Open Access Journals (Sweden)

    Tadas Juknius

    2016-05-01

    Full Text Available In the current work, a new antibacterial bandage was proposed where diamond-like carbon with silver nanoparticle (DLC:Ag-coated synthetic silk tissue was used as a building block. The DLC:Ag structure, the dimensions of nanoparticles, the silver concentration and the silver ion release were studied systematically employing scanning electron microscopy, energy dispersive X-ray spectroscopy and atomic absorption spectroscopy, respectively. Antimicrobial properties were investigated using microbiological tests (disk diffusion method and spread-plate technique. The DLC:Ag layer was stabilized on the surface of the bandage using a thin layer of medical grade gelatin and cellulose. Four different strains of Staphylococcus aureus extracted from humans’ and animals’ infected wounds were used. It is demonstrated that the efficiency of the Ag+ ion release to the aqueous media can be increased by further RF oxygen plasma etching of the nanocomposite. It was obtained that the best antibacterial properties were demonstrated by the plasma-processed DLC:Ag layer having a 3.12 at % Ag surface concentration with the dominating linear dimensions of nanoparticles being 23.7 nm. An extra protective layer made from cellulose and gelatin with agar contributed to the accumulation and efficient release of silver ions to the aqueous media, increasing bandage antimicrobial efficiency up to 50% as compared to the single DLC:Ag layer on textile.

  6. Functionalization of Hydrogen-free Diamond-like Carbon Films using Open-air Dielectric Barrier Discharge Atmospheric Plasma Treatments

    Energy Technology Data Exchange (ETDEWEB)

    Lawrence Berkeley National Laboratory, Berkeley, CA 94720, USA; Instituto de Materiales de Madrid, C.S.I.C., Cantoblanco, 28049 Madrid, Spain; Instituto de Quimica-Fisica" Rocasolano" C.S.I.C., 28006 Madrid, Spain; Mahasarakham University, Mahasarakham 44150, Thailand; CASTI, CNR-INFM Regional Laboratory, L' Aquila 67100, Italy; SUNY Upstate Medical University, Syracuse, NY 13210, USA; Endrino, Jose; Endrino, J. L.; Marco, J. F.; Poolcharuansin, P.; Phani, A.R.; Allen, M.; Albella, J. M.; Anders, A.

    2007-12-28

    A dielectric barrier discharge (DBD) technique has been employed to produce uniform atmospheric plasmas of He and N2 gas mixtures in open air in order to functionalize the surface of filtered-arc deposited hydrogen-free diamond-like carbon (DLC) films. XPS measurements were carried out on both untreated and He/N2 DBD plasma treated DLC surfaces. Chemical states of the C 1s and N 1s peaks were collected and used to characterize the surface bonds. Contact angle measurements were also used to record the short- and long-term variations in wettability of treated and untreated DLC. In addition, cell viability tests were performed to determine the influence of various He/N2 atmospheric plasma treatments on the attachment of osteoblast MC3T3 cells. Current evidence shows the feasibility of atmospheric plasmas in producing long-lasting variations in the surface bonding and surface energy of hydrogen-free DLC and consequently the potential for this technique in the functionalization of DLC coated devices.

  7. Cathodoluminescence of Cr-doped diamond-like carbon film by filtered cathodic vacuum arc plasma

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Meng-Wen; Jao, Jui-Yun [Department of Materials Science and Engineering, National Chung Hsing University, 250 Kuo Kuang Road, Taichung 402, Taiwan (China); Lin, Chun-Chun; Hsieh, Wei-Jen; Yang, Yu-Hsiang [Department of Materials Science and Engineering, National Tsing Hua University, 101, Sec. 2, Kuang-Fu Road, Hsinchu 300, Taiwan (China); Cheng, Li-Shin; Shieu, F.S. [Department of Materials Science and Engineering, National Chung Hsing University, 250 Kuo Kuang Road, Taichung 402, Taiwan (China); Shih, Han C., E-mail: hcshih@mx.nthu.edu.tw [Department of Materials Science and Engineering, National Chung Hsing University, 250 Kuo Kuang Road, Taichung 402, Taiwan (China); Department of Materials Science and Engineering, National Tsing Hua University, 101, Sec. 2, Kuang-Fu Road, Hsinchu 300, Taiwan (China); Institute of Materials Science and Nanotechnology, Chinese Culture University, 55 Hwa Kang Road, Yang Ming Shan, Taipei 111, Taiwan (China)

    2012-11-15

    Highlights: Black-Right-Pointing-Pointer The formation of the DLC:Cr films dependent on the flow rates of C{sub 2}H{sub 2}/Ar have been achieved in our FCVA plasma. Black-Right-Pointing-Pointer The amorphous DLC:Cr have high sp{sup 2} content can be completely converted to nanocrystalline Cr{sub 3}C{sub 2}. Black-Right-Pointing-Pointer The effect of doping with Cr is apparently to change the band structure of the DLC and its consequent cathodoluminescence property. - Abstract: Cr doped diamond-like carbon (DLC:Cr) film was synthesized in various flow rates of C{sub 2}H{sub 2}/Ar under a substrate voltage of -50 V at 500 Degree-Sign C by a filtered cathodic vacuum arc plasma. This work has found that the structure of the films was correlated to the flow rate of C{sub 2}H{sub 2}/Ar but the luminescence properties are similar. The cathodoluminescence spectra of DLC:Cr films obtained at 1.9-2.4 eV verifies that the luminescence from the films is in the visible region. The incorporation of Cr into the carbon network results in red emission shifted to 1.99 eV and the orange emission (2.03 eV) also appeared due to the transitions between chromium-related electron levels and {sigma}* states. The peak at 2.10 eV may result from the defects of the structures in DLC:Cr films.

  8. Fabrication of ZnO nanoparticles-embedded hydrogenated diamond-like carbon films by electrochemical deposition technique

    Institute of Scientific and Technical Information of China (English)

    Zhang Pei-Zeng; Li Rui-Shan; Pan Xiao-Jun; Xie Er-Qing

    2013-01-01

    ZnO nanoparticles-embedded hydrogenated diamond-like carbon (ZnO-DLC) films have been prepared by electrochemical deposition in ambient conditions.The morphology,composition,and microstructure of the films have been investigated.The results show that the resultant films are hydrogenated diamond-like carbon films embedded with ZnO nanoparticles in wurtzite structure,and the content and size of the ZnO nanoparticles increase with increasing deposition voltage,which are confirmed by X-ray photoelectron spectroscopy (XPS),Raman,and transmission electron microscope (TEM).Furthermore,a possible mechanism used to describe the growth process of ZnO-DLC films by electrochemical deposition is also discussed.

  9. Free standing diamond-like carbon thin films by PLD for laser based electrons/protons acceleration

    Energy Technology Data Exchange (ETDEWEB)

    Thema, F.T.; Beukes, P.; Ngom, B.D. [UNESCO Africa Chair in Nanosciences-Nanotechnology, College of Graduate Studies, University of South Africa, Muckleneuk Ridge, PO Box 392, Pretoria (South Africa); Nanosciences African Network (NANOAFNET), iThemba LABS-National Research Foundation, 1 Old Faure Road, Somerset West, 7129, PO Box722, Western Cape Province (South Africa); Manikandan, E., E-mail: mani@tlabs.ac.za [UNESCO Africa Chair in Nanosciences-Nanotechnology, College of Graduate Studies, University of South Africa, Muckleneuk Ridge, PO Box 392, Pretoria (South Africa); Nanosciences African Network (NANOAFNET), iThemba LABS-National Research Foundation, 1 Old Faure Road, Somerset West, 7129, PO Box722, Western Cape Province (South Africa); Central Research Laboratory, Sree Balaji Medical College & Hospital (SBMCH), Chrompet, Bharath University, Chennai, 600044 (India); Maaza, M., E-mail: maaza@tlabs.ac.za [UNESCO Africa Chair in Nanosciences-Nanotechnology, College of Graduate Studies, University of South Africa, Muckleneuk Ridge, PO Box 392, Pretoria (South Africa); Nanosciences African Network (NANOAFNET), iThemba LABS-National Research Foundation, 1 Old Faure Road, Somerset West, 7129, PO Box722, Western Cape Province (South Africa)

    2015-11-05

    This study we reports for the first time on the synthesis and optical characteristics of free standing diamond-like carbon (DLC) deposited by pulsed laser deposition (PLD) onto graphene buffer layers for ultrahigh intensity laser based electron/proton acceleration applications. The fingerprint techniques of micro-Raman, UV–VIS–NIR and the IR spectroscopic investigations indicate that the suitability of such free standing DLC thin-films within the laser window and long wave infrared (LWIR) spectral range and hence their appropriateness for the targeted applications. - Highlights: • We report for the first time synthesis of free standing diamond-like carbon. • Pulsed laser deposition onto graphene buffer layers. • Fingerprint techniques of micro-Raman, UV–VIS–NIR and the IR spectroscopic investigations. • Ultrahigh intensity laser based electron/proton acceleration applications. • This material's suitable for the laser window and long wave infrared (LWIR) spectral range.

  10. Dry And Ringer Solution Lubricated Tribology Of Thin Osseoconductive Metal Oxides And Diamond-Like Carbon Films

    Directory of Open Access Journals (Sweden)

    Waldhauser W.

    2015-09-01

    Full Text Available Achieving fast and strong adhesion to jawbone is essential for dental implants. Thin deposited films may improve osseointegration, but they are prone to cohesive and adhesive fracture due to high stresses while screwing the implant into the bone, leading to bared, less osteoconductive substrate surfaces and nano- and micro-particles in the bone. Aim of this work is the investigation of the cohesion and adhesion failure stresses of osteoconductive tantalum, titanium, silicon, zirconium and aluminium oxide and diamond-like carbon films. The tribological behaviour under dry and lubricated conditions (Ringer solution reveals best results for diamond-like carbon, while cohesion and adhesion of zirconium oxide films is highest.

  11. Adhesion improvement of hydrogenated diamond-like carbon thin films by pre-deposition plasma treatment of rubber substrate

    OpenAIRE

    Bui, X. L.; Pei, Y.T.; Mulder, E.D.G.; De Hosson, J. Th. M.

    2009-01-01

    For reduction of friction and enhancement of wear resistance of dynamic rubber seals, thin films of hydrogenated diamond-like carbon (DLC) have been deposited on hydrogenated nitrile butadiene rubber (HNBR) via magnetron-enhanced plasma chemical vapor deposition (ME-PCVD). Pre-deposition plasma treatment of HNBR substrate is proved to be crucial for the improvement of film performance due to enhanced interfacial adhesion. The columnar structure and the crack network formed during deposition e...

  12. The Comparison of Biocompatibility Properties between Ti Alloys and Fluorinated Diamond-Like Carbon Films

    Directory of Open Access Journals (Sweden)

    Chavin Jongwannasiri

    2012-01-01

    Full Text Available Titanium and titanium alloys have found several applications in the biomedical field due to their unique biocompatibility. However, there are problems associated with these materials in applications in which there is direct contact with blood, for instance, thrombogenesis and protein adsorption. Surface modification is one of the effective methods used to improve the performance of Ti and Ti alloys in these circumstances. In this study, fluorinated diamond-like carbon (F-DLC films are chosen to take into account the biocompatible properties compared with Ti alloys. F-DLC films were prepared on NiTi substrates by a plasma-based ion implantation (PBII technique using acetylene (C2H2 and tetrafluoromethane (CF4 as plasma sources. The structure of the films was characterized by Raman spectroscopy. The contact angle and surface energy were also measured. Protein adsorption was performed by treating the films with bovine serum albumin and fibrinogen. The electrochemical corrosion behavior was investigated in Hanks’ solution by means of a potentiodynamic polarization technique. Cytotoxicity tests were performed using MTT assay and dyed fluorescence. The results indicate that F-DLC films present their hydrophobic surfaces due to a high contact angle and low surface energy. These films can support the higher albumin-to-fibrinogen ratio as compared to Ti alloys. They tend to suppress the platelet adhesion. Furthermore, F-DLC films exhibit better corrosion resistance and less cytotoxicity on their surfaces. It can be concluded that F-DLC films can improve the biocompatibility properties of Ti alloys.

  13. In vitro Cyto and Blood Compatibility of Titanium Containing Diamond-Like Carbon Prepared by Hybrid Sputtering Method

    Institute of Scientific and Technical Information of China (English)

    Krishnasamy NAVANEETHA PANDIYARAJ; Jan HEEG; Andreas LAMPKA; Fabian JUNGE; Torsten BARFELS; Marion WIENECKE; Young Ha RHEE; Hyoung Woo KIM

    2012-01-01

    In recent years, diamond-like carbon films (DLC) have been given more attention in research in the biomedical industry due to their potential application as surface coating on biomedical materials such as metals and polymer substrates. There are many ways to prepare metal containing DLC films deposited on polymeric film substrates, such as coatings from car- bonaceous precursors and some means that incorporate other elements. In this study, we in- vestigated both the surface and biocompatible properties of titanium containing DLC (Ti-DLC) films. The Ti-DLC films were prepared on the surface of poly (ethylene terephthalate) (PET) film as a function of the deposition power level using reactive sputtering technique. The films' hydrophilicity was studied by contact angle and surface energy tests. Their surface morphology was studied by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Their elemental chemical composition was analyzed using energy dispersive X-spectra (EDX) and X-ray photoelectron spectroscopy (XPS). Their blood and cell compatibility was studied by in vitro tests, including tests on platelet adhesion, thrombus formation, whole blood clotting time and osteoblast cell compatibility. Significant changes in the morphological and chemical composition of the Ti-DLC films were observed and found to be a function of the deposition level. These morphological and chemical changes reduced the interfacial tension between Ti-DLC and blood proteins as well as resisted the adhesion and activation of platelets on the surface of the Ti-DLC films. The cell compatibility results exhibited significant growth of osteoblast cells on the surface of Ti incorporated DLC film compared with that of DLC film surface.

  14. Intertwisted fibrillar diamond-like carbon films prepared by electron cyclotron resonance microwave plasma enhanced chemical vapour deposition

    Institute of Scientific and Technical Information of China (English)

    杨武保; 王久丽; 张谷令; 范松华; 刘赤子; 杨思泽

    2003-01-01

    In this paper, the structures, optical and mechanical properties of diamond-like carbon films are studied, which are prepared by a self-fabricated electron cyclotron resonance microwave plasma chemical vapour deposition method at room temperature in the ambient gases of mixed acetylene and nitrogen. The morphology and microstructure of the processed film are characterized by the atomic force microscope image, Raman spectra and middle Fourier transform infrared transmittance spectra, which reveal that there is an intertwisted fibrillar diamond-like structure in the film and the film is mainly composed of sp3 CH, sp3 C-C, sp2 C=C, C=N and C60. The film micro-hardness and bulk modulus are measured by a nano-indenter and the refractive constant and deposition rate are also calculated.

  15. Improvement of radiation stability of semi-insulating gallium arsenide crystals by deposition of diamond-like carbon films

    Science.gov (United States)

    Klyui, N. I.; Lozinskii, V. B.; Liptuga, A. I.; Izotov, V. Yu.; Han, Wei; Liu, Bingbing

    2016-12-01

    We studied the properties of optical elements for the IR spectral range based on semi-insulating gallium arsenide (SI-GaAs) and antireflecting diamond-like carbon films (DLCF). Particular attention has been paid to the effect of penetrating γ-radiation on transmission of the developed optical elements. A Co60 source and step-by-step gaining of γ-irradiation dose were used for treatment of both an initial SI-GaAs crystal and DLCF/SI-GaAs structures. It was shown that DLCF deposition essentially increases degradation resistance of the SI-GaAs-based optical elements to γ-radiation. Particularly, the transmittance of the DLCF/SI-GaAs structure after γ-irradiation with a dose 9ṡ104 Gy even exceeds that of initial structures. The possible mechanism that explains the effect of γ-radiation on the SI-GaAs crystals and the DLCF/SI-GaAs structures at different irradiation doses was proposed. The effect of small doses is responsible for non-monotonic transmission changes in both SI-GaAs crystals and DLCF/SI-GaAs structures. At further increasing the γ-irradiation dose, the variation of properties of both DLCF and SI-GaAs crystal influences on the transmission of DLCF/SI-GaAs system. At high γ-irradiation dose 1.4ṡ105 Gy, passivation of radiation defects in the SI-GaAs bulk by hydrogen diffused from DLCF leads to increasing the degradation resistance of the SI-GaAs crystals coated with DLCF as compared with the crystals without DLCF.

  16. Diamond-like carbon films synthesized on bearing steel surface by plasma immersion ion implantation and deposition

    Institute of Scientific and Technical Information of China (English)

    LIU Hong-xi; TANG Bao-yin; WANG Lang-ping; WANG Xiao-feng; YU Yong-hao; SUN Tao; HU Li-guo

    2004-01-01

    Diamond-like carbon (DLC) films were synthesized by plasma immersion ion implantation and deposition (PIIID) on 9Cr18 bearing steel surface. Influences of working gas pressure and pulse width of the bias voltage on properties of the thin film were investigated. The chemical compositions of the as-deposited films were characterized by Raman spectroscopy. The micro-hardness, friction and wear behavior, corrosion resistance of the samples were evaluated, respectively. Compared with uncoated substrates, micro-hardness results reveal that the maximum is increased by 88.7%. In addition, the friction coefficient decreases to about 0.1, and the corrosion resistance of treated coupons surface are improved significantly.

  17. TiO2-NT electrodes modified with Ag and diamond like carbon (DLC) for hydrogen production by alkaline water electrolysis

    Science.gov (United States)

    Baran, Evrim; Baz, Zeynep; Esen, Ramazan; Yazici Devrim, Birgül

    2017-10-01

    In present work, the two-step anodization technique was applied for synthesis of TiO2 nanotube (NT). Silver and diamond like carbon (DLC) were coated on the surface of as prepared TiO2-NT using chemical reduction method and MW ECR plasma system. The morphology, composition and structure of the electrodes were examined by field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). The results showed that Ag nanoparticles, having size in the range of 48-115 nm, are evenly distributed on the top, inside and outside surface of TiO2-NT and when DLC was coated on the surface of TiO2-NT and TiO2-NT-Ag, the top of nanotubes were partially open and the pore diameter of hexagonal structure decreased from 165 nm to of 38-80 nm. On the other hand, the microhardness test and contact angle measurements revealed that additions of Ag and diamond like carbon have a positive effect on the mechanical properties of TiO2-NT film. The electrocatalytic properties of the electrodes towards the hydrogen evolution reaction (HER) were investigated by the electrochemical measurements recorded in 1 M KOH solution. In addition, long-term durability of electrodes towards HER and the energy consumption of alkaline electrolysis were investigated. The energy requirement showed that while the deposition of silver provides approximately 14.95% savings of the energy consumption, the DLC coating causes increase in energy consumption.

  18. Deposition of Diamond-Like carbon Films by High-Intensity Pulsed Ion Beam Ablation at Various Substrate Temperatures

    Institute of Scientific and Technical Information of China (English)

    梅显秀; 刘振民; 马腾才; 董闯

    2003-01-01

    Diamond-like carbon (DLC) films have been deposited on to Si substrates at substrate temperatures from 25℃to 400 ℃ by a high-intensity pulsed-ion-beam (HIPIB) ablation deposition technique. The formation of DLC is confirmed by Raman spectroscopy. According to an x-ray photoelectron spectroscopy analysis, the concentration of spa carbon in the films is about 40% when the substrate temperature is below 300 ℃. With increasing substrate temperature from 25 ℃ to 400 ℃, the concentration of sp3 carbon decreases from 43% to 8%. In other words,sp3 carbon is graphitized into sp2 carbon when the substrate temperature is above 300 ℃. The results of xray diffraction and atomic force microscopy show that, with increasing the substrate temperature, the surface roughness and the friction coefficient increase, and the microhardness and the residual stress of the films decrease.

  19. Composition and morphology of metal-containing diamond-like carbon films obtained by reactive magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Corbella, C. [FEMAN Group, Departament de Fisica Aplicada i Optica, Universitat de Barcelona, Av. Diagonal 647, E08028 Barcelona (Spain)]. E-mail: corbella@ub.edu; Pascual, E. [FEMAN Group, Departament de Fisica Aplicada i Optica, Universitat de Barcelona, Av. Diagonal 647, E08028 Barcelona (Spain); Oncins, G. [Serveis Cientificotecnics, Universitat de Barcelona, PCB, c/ Josep Samitier 1-5, E08028 Barcelona (Spain); Canal, C. [Departamento de Tecnologia de Tensioactivos IQAB-CSIC, c/ Jordi Girona 18-26, E08034 Barcelona (Spain); Andujar, J.L. [FEMAN Group, Departament de Fisica Aplicada i Optica, Universitat de Barcelona, Av. Diagonal 647, E08028 Barcelona (Spain); Bertran, E. [FEMAN Group, Departament de Fisica Aplicada i Optica, Universitat de Barcelona, Av. Diagonal 647, E08028 Barcelona (Spain)

    2005-06-22

    The addition of metal atoms within the matrix of diamond-like carbon films leads to the improvement of their mechanical properties. The present paper discusses the relationship between the composition and morphology of metal-containing (W, Nb, Mo, Ti) diamond-like carbon thin films deposited at room temperature by reactive magnetron sputtering from a metal target in an argon and methane atmosphere. Composition was measured either by electron microprobe technique or by X-ray photoelectron spectroscopy and shows a smooth variation with relative methane flow. High relative methane flows lead to a bulk saturation of carbon atoms, which leads to a lack of homogeneity in the films as confirmed by secondary ion mass spectrometry. Cross-section micrographs were observed by transmission electron microscopy and revealed a structure strongly influenced by the metal inserted and its abundance. The surface pattern obtained by scanning electrochemical potential microscopy provided the metallicity distribution. These measurements were completed with atomic force microscopy of the surface. Selected area electron diffraction and X-ray diffraction measurements provided data of the crystalline structure along with nano-crystallite size. High-resolution transmission electron microscopy provided images of these crystallites.

  20. Structural Analysis of Planar sp3 and sp2 Films: Diamond-Like Carbon and Graphene Overlayers

    KAUST Repository

    Mansour, Ahmed

    2011-07-07

    The special electronic configuration of carbon enables the existence of wide ranging allotropes taking all possible dimensionalities. The allotropes of carbon are characterized by the type of hybridized bonding forming its structure, ranging from pure sp2 as in graphene, carbon nanotubes and fullerenes, to pure sp3 as in diamond. Amorphous and diamond-like carbon consists of a mixture of both hybridizations. This variation in hybridization in carbon materials enables a wide spectrum of properties, ranging from high bulk mechanical hardness, tribological properties and chemical inertness made possible by moving towards pure sp3 bonding to the extraordinary electrical conductivity, optical properties and in-plane mechanical strength resulting from pure sp2 bonding. Two allotropes at the extremes of this spectrum, diamond like carbon (DLC) and graphene, are investigated in this thesis; the former is investigated as a protective coating in hard drive applications, while the latter is investigated in the context of chemically derived graphene as material for transparent conducting electrode applications. DLC thin films are a main component in computer hard drives, acting as a protective coating against corrosion and mechanical wear of the magnetic layer and read-write head. The thickness of DLC films greatly affects the storage density in such devices, as larger separation between the read/write head and the magnetic layer decreases the storage density. A targeted DLC thickness of 2 nm would increase the storage density towards 1 Tbits/inch2. However, difficulty achieving continuous films at such thicknesses by commonly used sputtering methods challenges the industry to investigate alternative methods. Filtered cathodic vacuum arc (FCVA) has been proposed as an efficient technique to provide continuous, smooth and ultra-thin DLC films. We investigate the influence of deposition angle, deposition time, and substrate biasing to define the optimum process window to obtain

  1. Ultrathin diamond-like carbon films deposited by filtered carbon vacuum arcs

    Energy Technology Data Exchange (ETDEWEB)

    Anders, Andre; Fong, Walton; Kulkarni, Ashok; Ryan, Francis W.; Bhatia, C. Singh

    2001-07-13

    Ultrathin (< 5 nm) hard carbon films are of great interest to the magnetic storage industry as the areal density approaches 100 Gbit/in{sup 2}. These films are used as overcoats to protect the magnetic layers on disk media and the active elements of the read-write slider. Tetrahedral amorphous carbon films can be produced by filtered cathodic arc deposition, but the films will only be accepted by the storage industry only if the ''macroparticle'' issue has been solved. Better plasma filters have been developed over recent years. Emphasis is put on the promising twist filter system - a compact, open structure that operates with pulsed arcs and high magnetic field. Based on corrosion tests it is shown that the macroparticle reduction by the twist filter is satisfactory for this demanding application, while plasma throughput is very high. Ultrathin hard carbon films have been synthesized using S-filter and twist filter systems. Film properties such as hardness, elastic modulus, wear, and corrosion resistance have been tested.

  2. Ultrathin diamond-like carbon films deposited by filtered carbon vacuum arcs

    Energy Technology Data Exchange (ETDEWEB)

    Anders, Andre; Fong, Walton; Kulkarni, Ashok; Ryan, Francis W.; Bhatia, C. Singh

    2001-07-13

    Ultrathin (< 5 nm) hard carbon films are of great interest to the magnetic storage industry as the areal density approaches 100 Gbit/in{sup 2}. These films are used as overcoats to protect the magnetic layers on disk media and the active elements of the read-write slider. Tetrahedral amorphous carbon films can be produced by filtered cathodic arc deposition, but the films will only be accepted by the storage industry only if the ''macroparticle'' issue has been solved. Better plasma filters have been developed over recent years. Emphasis is put on the promising twist filter system - a compact, open structure that operates with pulsed arcs and high magnetic field. Based on corrosion tests it is shown that the macroparticle reduction by the twist filter is satisfactory for this demanding application, while plasma throughput is very high. Ultrathin hard carbon films have been synthesized using S-filter and twist filter systems. Film properties such as hardness, elastic modulus, wear, and corrosion resistance have been tested.

  3. Structural characteristics of surface-functionalized nitrogen-doped diamond-like carbon films and effective adjustment to cell attachment

    Science.gov (United States)

    Liu, Ai-Ping; Liu, Min; Yu, Jian-Can; Qian, Guo-Dong; Tang, Wei-Hua

    2015-05-01

    Nitrogen-doped diamond-like carbon (DLC:N) films prepared by the filtered cathodic vacuum arc technology are functionalized with various chemical molecules including dopamine (DA), 3-Aminobenzeneboronic acid (APBA), and adenosine triphosphate (ATP), and the impacts of surface functionalities on the surface morphologies, compositions, microstructures, and cell compatibility of the DLC:N films are systematically investigated. We demonstrate that the surface groups of DLC:N have a significant effect on the surface and structural properties of the film. The activity of PC12 cells depends on the particular type of surface functional groups of DLC:N films regardless of surface roughness and wettability. Our research offers a novel way for designing functionalized carbon films as tailorable substrates for biosensors and biomedical engineering applications. Project supported by the National Natural Science Foundation of China (Grant Nos. 51272237, 51272231, and 51010002) and the China Postdoctoral Science Foundation (Grant Nos. 2012M520063, 2013T60587, and Bsh1201016).

  4. Hydrophobic and high transparent honeycomb diamond-like carbon thin film fabricated by facile self-assembled nanosphere lithography

    Science.gov (United States)

    Peng, Kai-Yu; Wei, Da-Hua; Lin, Chii-Ruey; Yu, Yueh-Chung; Yao, Yeong-Der; Lin, Hong-Ming

    2014-01-01

    In this paper, we take advantage of a facile fabrication technique called self-assembled nanosphere lithography (SANSL) combining with proper two-step reactive ion etching (RIE) method and radio frequency (RF) sputtering deposition process for manufacturing honeycomb diamond-like carbon (DLC) thin film structures with hydrophobic and high transparent properties. It is found that the DLC thin films deposited on clean glass substrates at the RF power of 100 W with the surface roughness (Ra) of 2.08 nm and the ID/IG ratio of 1.96 are realized. With a fill-factor of 0.691, the honeycomb DLC patterned thin film shows the best transmittance performance of 87% in the wavelength of visible light, and the optimized contact angle measurement is ˜108°. Compared with the pure DLC thin film and original glass substrate, the hydrophobic property of the patterned DLC films is significantly improved by 80 and 160%, respectively.

  5. Effect of Fe ion implantation on tribological properties and Raman spectra characteristics of diamond-like carbon film

    Institute of Scientific and Technical Information of China (English)

    JIA Wen-Bao; SUN Zhuo

    2004-01-01

    Fe ions in the fluence range of 2 × 1015 to 1×1017 cm -2 were implanted into diamond-like carbon (DLC) thin film of 100 nm thick, which were deposited on silicon substrate by plasma enhanced chemical vapor deposition.Effects of Fe ion implantation on microstructure and friction coefficient of the DLC were studied. With increasing Fe ion fluence, friction coefficient of the DLC film increased as compared with that of DLC without implantation, and then decreased. The Raman spectra characteristics also show a dependence on the Fe ion fluence. With increasing the ion fluence, the sp2 bonding increased in the DLC film, resulting in the decrease of friction coefficient of the film after implantation. Substantial surface roughness was also measured.

  6. Investigation of Physical Properties and Electrochemical Behavior of Nitrogen-Doped Diamond-Like Carbon Thin Films

    Directory of Open Access Journals (Sweden)

    Rattanakorn Saensak

    2014-03-01

    Full Text Available This work reports characterizations of diamond-like carbon (DLC films used as electrodes for electrochemical applications. DLC thin films are prepared on glass slides and silicon substrates by radio frequency plasma enhanced chemical vapor deposition (RF-PECVD using a gas mixture of methane and hydrogen. In addition, the DLC films are doped with nitrogen in order to reduce electrical resistivity. Compared to the undoped DLC films, the electrical resistivity of nitrogen-doped (N-doped DLC films is decreased by three orders of magnitude. Raman spectroscopy and UV/Vis spectroscopy analyses show the structural transformation in N-doped DLC films that causes the reduction of band gap energy. Contact angle measurement at N-doped DLC films indicates increased hydrophobicity. The results obtained from the cyclic voltammetry measurements with Fe(CN63-/Fe(CN64- redox species exhibit the correlation between the physical properties and electrochemical behavior of DLC films.

  7. Thermal effects on structure and photoluminescence properties of diamond-like carbon films prepared by pulsed laser deposition

    Institute of Scientific and Technical Information of China (English)

    CHEN Da; LI Qing-shan; WANG Jing-jing; ZHENG Xue-gang

    2006-01-01

    Un-hydrogenated Diamond-like Carbon (DLC) films were prepared by pulsed laser deposition technique at different substrate temperature.The Raman spectra,the absorption and the photoluminescence spectra were measured.The dependence of structure and photoluminescence properties on deposition temperature were studied in detail.The experimental results indicate that the sp2 sites form small clusters that consist of both olefinic chains and aromatic ring groups within the sp3 matrix.With raising deposition temperature,the optical band gaps increase from 1.87 to 2.85 eV.The main band of photoluminescence centered at around 700nm shifts to short wavelength,and the intensity of this band increases.The photoluminescence can be attributed to carrier localization within an increasing sp2 clusters.It was clarified that the DLC films are ordered with increasing deposition temperature.

  8. Dynamic optical properties of amorphous diamond-like carbon nanocomposite films doped with Cu and Ag nanoparticles

    Science.gov (United States)

    Tamulevičius, Tomas; Peckus, Domantas; Tamulevičiene, Asta; Vasiliauskas, Andrius; Čiegis, Arvydas; Meškinis, Šarūnas; Tamulevičius, Sigitas

    2014-09-01

    The investigation of relaxation processes in noble metal nanoparticles upon ultrafast excitations by femtosecond laser pulses is useful to understand the origin and the enhancement mechanism of the nonlinear optical properties for metaldielectric nanocomposites. In the current work we analyze diamond like carbon (DLC) film based copper and silver nanocomposites with different metal content synthesized employing unbalanced magnetron sputtering of metal targets with argon ions in acetylene gas atmosphere. Surface morphology and nanoparticle sizes were analyzed employing scanning electron and atomic force microscopy. Optical properties of the nanocomposite films were analyzed employing UV-VIS-NIR spectrometry. Transient absorption measurements were obtained employing Yb:KGW femtosecond laser spectroscopic system (HARPIA, Light Conversion Ltd.). Energy relaxation dynamics in Cu nanoparticles showed some significant differences from Ag nanoparticles. The increase of excitation intensity hasn't show additional nonlinear effects for the excited state relaxation dynamics for both kinds of samples.

  9. Plasma deposition of diamond-like carbon and fluorinated amorphous carbon and the resultant properties and structure

    Science.gov (United States)

    Glew, Alexander David

    Researchers first created diamondlike carbon (DLC) 50 years ago, but it has only been the subject of intense research for the last decade. DLC is a highly stressed thin film that exists as a mixture of diamond like sp 3 and graphite like sp2 bonded carbon, with 0--50% H. Many believe that high intrinsic stress states are necessary to stabilize the carbon spa content responsible for the high hardness of DLC. This author's goals include fabricating high quality fluorinated amorphous carbon (FLAC) films by plasma enhanced chemical vapor deposition (PECVD), exploring the relationships between the processing parameters and the dielectric value, as well as the related material properties which limit the useful application of FLAC. An improved understanding of the fundamentals behind FLAC processing may allow workers to improve upon the properties limiting its use, such as intrinsic stress, thermal stability, and thermal conductivity. DLC and FLAC film hardness ranged from 14--16 GP and 16--18 GPa respectively. Their film stress ranged from 800 MPa to a 10 GPa. A study of the thickness dependent properties showed that only films thicker than 200 nm were able to achieve stresses greater than approximately 1.6 GPa, the room temperature transition pressure of graphite to diamond. X-ray photoelectron spectroscopy measurements also yielded different C sp3 contents for films of varying thickness deposited under the same conditions, helping to confirm a thickness dependence of film properties greater than 200 nm. Observation of the stress in real time during annealing of the films on Si wafers yielded activation energy values for the stress relief of DLC and FLAC as 0.11 and 0.24 eV respectively, and the CTE of DLC as 10.6 x 10-6 C-1. The stress relief mechanism consists of kinetically limited network arrangements that occur in highly stressed zones due heating, which are also the cause of the reduction in dielectric constant that occurs during rapid thermal annealing. Thermal

  10. Study of depth profile of hydrogen in hydrogenated diamond like carbon thin film using ion beam analysis techniques

    Energy Technology Data Exchange (ETDEWEB)

    Datta, J. [Analytical Chemistry Division, BARC, Variable Energy Cyclotron Centre, 1/AF, Bidhan Nagar, Kolkata 700064 (India); Biswas, H.S. [Dept. of Chemistry, Surendranath College, Kolkata 700009 (India); Rao, P.; Reddy, G.L.N.; Kumar, S. [National Centre for Compositional Characterization of Materials, BARC, ECIL Post, Hyderabad 500062 (India); Ray, N.R. [Surface Physics Material Science Division, Saha Institute of Nuclear Physics, 1/AF, Bidhan Nagar, Kolkata 700064 (India); Chowdhury, D.P. [Analytical Chemistry Division, BARC, Variable Energy Cyclotron Centre, 1/AF, Bidhan Nagar, Kolkata 700064 (India); Reddy, A.V.R. [Analytical Chemistry Division, Bhabha Atomic Research Centre, Trombay, Mumbai 400085 (India)

    2014-06-01

    The Hydrogenated Diamond Like Carbon (HDLC) thin films are deposited on Silicon substrate at room temperature using asymmetric capacitively coupled RF plasma with varying flow rates of methane. These films are undergone annealing at high vacuum (∼10{sup −7} torr) and high temperature (750 and 1050 °C) furnace. The as-prepared and annealed HDLC films have been depth profiled for hydrogen using the resonance at 6.44 MeV in {sup 1}H({sup 19}F,αγ){sup 16}O nuclear reaction. The as prepared films exhibit non-uniform depth distribution of hydrogen: it decreases with depth. Annealing in vacuum brings about is a significant desorption of hydrogen from the films. Loss of hydrogen, albeit in much lower proportions, is also induced by the bombarding beam. The films also experience a mild loss of carbon, as shown by proton backscattering spectrometry, during high vacuum annealing. The depth profiles of hydrogen in the annealed films are indicative of the prevalence of graphitic carbon near film–substrate interface.

  11. Study of Fluorine Addition Influence in the Dielectric Constant of Diamond-Like Carbon Thin Film Deposited by Reactive Sputtering

    Science.gov (United States)

    Trippe, S. C.; Mansano, R. D.

    The hydrogenated amorphous carbon films (a-C:H) or DLC (Diamond-Like Carbon) films are well known for exhibiting high electrical resistivity, low dielectric constant, high mechanical hardness, low friction coefficient, low superficial roughness and also for being inert. In this paper, we produced fluorinated DLC films (a-C:F), and studied the effect of adding CF4 on the above-mentioned properties of DLC films. These films were produced by a reactive RF magnetron sputtering system using a target of pure carbon in stable graphite allotrope. We performed measurements of electrical characteristic curves of capacitance as a function of applied tension (C-V) and current as a function of the applied tension (I-V). We showed the dielectric constant (k) and the resistivity (ρ) as functions of the CF4 concentration. On films with 65% CF4, we found that k = 2.7, and on films with 70% CF4, ρ = 12.3 × 1011 Ω cm. The value of the electrical breakdown field to films with 70% CF4 is 5.3 × 106 V/cm.

  12. STRUCTURE, MECHANICAL PROPERTIES AND THERMAL STABILITY OF DIAMOND-LIKE CARBON FILMS PREPARED BY ARC ION PLATING

    Institute of Scientific and Technical Information of China (English)

    Y.S. Zou; J.D. Zheng; J. Gong; C. Sun; R.F. Huang; L.S. Wen

    2005-01-01

    Diamond-like Carbon (DLC) films have been prepared on Si(100) substrates by arc ion plating in conjunction with pulse bias voltage under H2 atmosphere. The deposited films have been characterized by scanning electron microscopy and atomic force microscopy. The results show that the surface of the film is smooth and dense without any cracks, and the surface roughness is low. The bonding characteristic of the films has been studied by X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. It shows the sp3 bond content of the film deposited at -200V is 26.7%. The hardness and elastic modulus of the film determined by nanoindentation technique are 30.8 and 250.1GPa, respectively. The tribological characteristic of the films reveals that they have low friction coefficient and good wear-resistance. After deposition, the films have been annealed in the range of 350-700℃ for 1h in vacuum to investigate the thermal stability. Raman spectra indicate that the ID/IG ratio and G peak position have few detectable changes below 500℃. Further increasing the annealing temperature, the hydrogen can be released, the structure rearranges, and the phase transition of sp3 configured carbon to sp2 configured carbon appears.

  13. Influence of zinc dialkyldithiophosphate tribofilm formation on the tribological performance of self-mated diamond-like carbon contacts under boundary lubrication

    Energy Technology Data Exchange (ETDEWEB)

    Abdullah Tasdemir, H., E-mail: habdullah46@gmail.com [Department of Mechanical Science and Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya, Aichi 464-8603 (Japan); Tokoroyama, Takayuki; Kousaka, Hiroyuki; Umehara, Noritsugu [Department of Mechanical Science and Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya, Aichi 464-8603 (Japan); Mabuchi, Yutaka [Nissan Motor Co. (Japan)

    2014-07-01

    Diamond-like carbon (DLC) coatings offer excellent mechanical and tribological properties that make them suitable protective coatings for various industrial applications. In recent years, several engine and power train components in passenger cars, which work under boundary lubricated conditions, have been coated with DLC coatings. Since conventional lubricants and lubricant additives are formulated for metal surfaces, there are still controversial questions concerning chemical reactivity between DLC surfaces and common lubricant additives owing to the chemical inertness of DLC coatings. In this work, we present the influence of zinc dialkyldithiophosphate (ZnDTP) anti-wear additives on the tribological performance of various self-mated DLC coatings under boundary lubrication conditions. The effects of hydrogen, doping elements, and surface morphology on the reactivity of DLC coatings to form a ZnDTP-derived tribofilm were investigated by atomic force microscopy, field emission scanning electron microscopy and X-ray photoelectron spectroscopy. The results confirmed that ZnDTP-derived pad-like or patchy tribofilm forms on the surfaces depending on the DLC coating. It is seen that hydrogen content and doping elements increase pad-like tribofilm formation. Doped DLC coatings are found to give better wear resistance than non-doped DLC coatings. Furthermore, the addition of ZnDTP additives to the base oil significantly improves the wear resistance of hydrogenated DLC, silicon-doped hydrogenated DLC, and chromium-doped hydrogenated DLC. Hydrogen-free tetrahedral amorphous DLC coatings provide the lowest friction coefficient both in PAO (poly-alpha-olefin) and PAO + ZnDTP oils. - Highlights: • Zinc dialkyldithiophosphate (DTP) tribofilm formation on various DLC surfaces was evidenced. • Pad-like tribofilm was found on a-C:H, a-C, Si-DLC and Cr-DLC. • Pad-like tribofilm on DLC surfaces greatly increased the wear resistance. • Hydrogenated and doped DLC coatings are

  14. Study of Diamond like Carbon as template for nanoimprint lithography and as a filler material for vertically aligned carbon nanotube forests

    Science.gov (United States)

    Ramachandran, Seetharaman

    Due to its tunable properties like hardness, optical gap, chemical inertness, electrical resistivity, biocompatibility etc., coatings of the material Diamond like Carbon (DLC) have been used as protective layers for various applications. In this research effort, we add to the growing list of its potential applications by proposing them as a template material for the emerging field of nanoimprint lithography. Using capacitive and inductive plasmas, we demonstrate the possibility of depositing DLC films of reasonable hardness (10-25 GPa) and wear resistance (2X that of Si and 3X that of Quartz). We have successfully used these films as a mold material to obtain feature sizes as small as 40 nm. In addition, to further the understanding of the effect of the gas phase chemistry on the film properties, the Methane discharge used for obtaining these films has been studied using techniques like Fourier Transform Infrared Spectroscopy and Optical Emission Spectroscopy. The higher degree of dissociation (up to 70%) of the precursor in case of inductive plasmas leads to selected conditions under which hard DLC films are obtained. We also show that for the same deposition conditions, films deposited on the insulating Quartz substrates are softer and more polymeric than those deposited on Si substrates. Carbon nanotubes with their unique physical properties are seen as ideal candidates for applications like field effect transistors, supercapacitors, AFM tips and electronic devices. One of the chief challenges in using them for these applications is obtaining them in a form that is easier to handle, thus enabling them to withstand the various post-processing steps. The second part of this dissertation focuses on the possibility of obtaining a Carbon-Carbon composite structure by subjecting vertically aligned Carbon nanotube forests to a PECVD based process. The distance from the top of the CNT forest that is coated with the deposited film (termed as the depth of infusion) shows

  15. Debris reduction for copper and diamond-like carbon thin films produced by magnetically guided pulsed laser deposition

    CERN Document Server

    Tsui, Y Y; Vick, D; Fedosejevs, R

    2002-01-01

    The effectiveness of debris reduction using magnetically guided pulsed laser deposition (MGPLD) is reported here. KrF laser pulses (248 nm) of 100 mJ energy were focused to intensities of 6x10 sup 9 W/cm sup 2 onto the surface of a copper or a carbon source target and a magnetic field of 0.3 T as used to steer the plasma around a curved arc of 0.5 m length to the deposition substrate. Debris counts were compared for films produced by the MGPLD and conventional PLD (nonguided) techniques. A significant reduction in particulates of size greater than 0.1 mu m was achieved using MGPLD. For the copper films, particulate count was reduced from 150 000 particles/cm sup 2 /nm to 50 particulates/cm sup 2 /nm and for diamond-like carbon thin films particulate count was reduced from 25 000 particles/cm sup 2 /nm to 1200 particles/cm sup 2 /nm.

  16. Diamond-like carbon films deposited on three-dimensional shape substrate model by liquid electrochemical technique

    Energy Technology Data Exchange (ETDEWEB)

    He, Y.Y. [Institute of Nano-photonics, School of Physics and Materials Engineering, Dalian Nationalities University, 116600 Dalian (China); Zhang, G.F. [School of Materials Science and Engineering, Dalian University of Technology, 116024, Dalian China (China); Zhao, Y.; Liu, D.D. [Institute of Nano-photonics, School of Physics and Materials Engineering, Dalian Nationalities University, 116600 Dalian (China); Cong, Y., E-mail: congyan@ciomp.ac.cn [Institute of Nano-photonics, School of Physics and Materials Engineering, Dalian Nationalities University, 116600 Dalian (China); Buck, V. [Thin Film Technology Group, Faculty of Physics, University Duisburg-Essen and CeNIDE, 47057 Duisburg (Germany)

    2015-09-01

    Diamond-like carbon (DLC) films were deposited on three-dimensional (3D) shape substrate model by electrolysis of 2-propanol solution at low temperature (60 °C). This 3D shape model was composed of a horizontally aligned stainless steel wafer and vertically aligned stainless steel rods. Morphology and microstructure of the films were analyzed by scanning electron microscopy (SEM), atomic force microscopy (AFM) and Raman spectroscopy, respectively. The results suggested there were only differences in film uniformity and thickness for two kinds of samples. The hydrogenated amorphous carbon films deposited on horizontally aligned substrate were smooth and homogeneous. And the film thickness of DLC films gained on the vertical substrates decreased along vertical direction. It is believed that bubble formation could enhance nucleation on the wetted capillary area. This experiment shows that deposition of DLC films by liquid phase deposition on 3D shape conductive substrates is possible. - Highlights: • DLC film is expected to be deposited on complex surface/shape substrate. • DLC film is deposited on 3D shape substrate by liquid electrochemical method. • Horizontal substrate is covered by smooth and homogeneous DLC films. • Film thickness decreases along vertical direction due to boiling effect.

  17. Diamond-like carbon produced by plasma source ion implantation as a corrosion barrier

    Energy Technology Data Exchange (ETDEWEB)

    Lillard, R.S.; Butt, D.P.; Taylor, T.N.; Walter, K.C.; Nastasi, M.

    1998-03-01

    There currently exists a broad range of applications for which the ability to produce an adherent, hard, wear and, corrosion-resistant coating plays a vital role. These applications include engine components, orthopedic devices, textile manufacturing components, hard disk media, optical coatings, and cutting and machining tools (e.g., punches, taps, scoring dies, and extrusion dies). Ion beam processing can play an important role in all of these technologies. Plasma source ion implantation (PSII) is an emerging technology which has the potential to overcome the limitations of conventional ion implantation by: (1) reducing the time and expense for implanting onto complex shapes and large areas and (2) extending the thickness of the modification zone through ion beam enhanced plasma growth of surface coatings. In PSII, targets are placed directly in a plasma source and then pulse biased to produce a non-line-of-sight process for complex-shaped targets without complex fixturing. If the pulse bias is a relatively high negative potential (20 to 100 kV) ion implantation will result. If however, a low voltage (50--1,200 eV) high duty cycle pulse bias is applied, film deposition from the chamber gas will result, thereby increasing the extent of the surface modification into the 1--10 micron regime. To evaluate the potential for DLC to be used as a corrosion barrier, Electrochemical Impedance Spectroscopy (EIS) and traditional electrochemistry techniques were used to investigate the breakdown mechanism in chloride and nonchloride containing environments. The effect of surface preparation on coating breakdown was also evaluated.

  18. Effect of boron incorporation on the structure and electrical properties of diamond-like carbon films deposited by femtosecond and nanosecond pulsed laser ablation

    Energy Technology Data Exchange (ETDEWEB)

    Sikora, A. [Laboratoire Hubert Curien, UMR 5516 CNRS, Universite Jean Monnet, 18 Rue Pr. Benoit Lauras, 42000 Saint-Etienne (France); Bourgeois, O. [Institut Neel, UPR 2940 CNRS, 25 Avenue des Martyrs, 38042 Grenoble Cedex 9 (France); Sanchez-Lopez, J.C. [Instituto de Ciencia de Materiales de Sevilla, Avda. Americo Vespucio, 49 41092 Sevilla (Spain); Rouzaud, J.-N. [Laboratoire de Geologie, UMR 8538 CNRS, Ecole Normale Superieure, 45 Rue d' Ulm, 75230 Paris Cedex 05 (France); Rojas, T.C. [Instituto de Ciencia de Materiales de Sevilla, Avda. Americo Vespucio, 49 41092 Sevilla (Spain); Loir, A.-S. [Laboratoire Hubert Curien, UMR 5516 CNRS, Universite Jean Monnet, 18 Rue Pr. Benoit Lauras, 42000 Saint-Etienne (France); Garden, J.-L. [Institut Neel, UPR 2940 CNRS, 25 Avenue des Martyrs, 38042 Grenoble Cedex 9 (France); Garrelie, F. [Laboratoire Hubert Curien, UMR 5516 CNRS, Universite Jean Monnet, 18 Rue Pr. Benoit Lauras, 42000 Saint-Etienne (France); Donnet, C., E-mail: christophe.donnet@univ-st-etienne.f [Laboratoire Hubert Curien, UMR 5516 CNRS, Universite Jean Monnet, 18 Rue Pr. Benoit Lauras, 42000 Saint-Etienne (France)

    2009-12-31

    The influence of the incorporation of boron in diamond-like carbon (DLC) films on the microstructure of the coatings has been investigated. The boron-containing DLC films (a-C:B) have been deposited by pulsed laser deposition (PLD) at room temperature in high vacuum conditions, by ablating graphite and boron targets either with a femtosecond pulsed laser (800 nm, 150 fs, fs-DLC) or with a nanosecond pulsed laser (248 nm, 20 ns, ns-DLC). Alternative ablation of the graphite and boron targets has been carried out to deposit the a-C:B films. The film structure and composition have been highlighted by coupling Field Emission Scanning Electron Microscopy, Electron Energy Loss Spectroscopy and High Resolution Transmission Electron Microscopy. Using the B K-edge, EELS characterization reveals the boron effect on the carbon bonding. Moreover, the plasmon energy reveals a tendency of graphitization associated to the boron doping. Pure boron particles have been characterized by HRTEM and reveal that those particles are amorphous or crystallized. The nanostructures of the boron-doped ns-DLC and the boron-doped fs-DLC are thus compared. In particular, the incorporation of boron in the DLC matrix is highlighted, depending on the laser used for deposition. Electrical measurements show that some of these films have potentialities to be used in low temperature thermometry, considering their conductivity and temperature coefficient of resistance (TCR) estimated within the temperature range 160-300 K.

  19. Ion induced transformation of polymer films into diamond-like carbon incorporating silver nano particles; Ioneninduzierte Umwandlung von Polymerschichten zu diamantaehnlichem Kohlenstoff mit darin enthaltenen Silber-Nanopartikeln

    Energy Technology Data Exchange (ETDEWEB)

    Schwarz, Florian P.

    2010-03-26

    Silver containing diamond-like carbon (DLC) is an interesting material for medical engineering from several points of view. On the one hand DLC provides high mechanical robustness. It can be used as biocompatible and wear resistant coating for joint replacing implants. On the other hand silver has antimicrobial properties, which could reduce post-operative inflammations. However conventional production of Ag-DLC by co-deposition of silver and carbon in a plasma process is problematic since it does not allow for a separate control of nano particle morphology and matrix properties. In this work an alternative production method has been developed to circumvent this problem. In metall-DLC-production by ion implantation into a nano composite, silver nano particles are initially formed in solution and then incorporated within a polymer matrix. Finally the polymer is transformed into DLC by ion implantation. The aspects and single steps of this method were investigated with regard to the resulting material's properties. The goal was to design an economically relevant deposition method. Based on experimental results a model of the transformation process has been established, which has also been implemented in a computer simulation. Finally the antibacterial properties of the material have been checked in a biomedical test. Here a bacterial killing rate of 90% could be achieved. (orig.)

  20. The characterisation of the microstructure and mechanical properties of diamond - like carbon (DLC for endoprosthesis

    Directory of Open Access Journals (Sweden)

    R. Gałuszka

    2017-01-01

    Full Text Available The paper presents the results of research of DLC coating of a - C:H type obtained by using a technique of physical vapor deposition (PVD on the surface of CoCrMo alloy, commonly used for the elements of the endoprosthesis. The surface has been observed using a scanning electron microscope (SEM. Analysis of the chemical composition and distribution of the different elements were performed using glow discharge optical emission spectrometry analysis (GDOES. It has been shown that the DLC elements are characterized by high hardness and good adhesion to the substrate.

  1. Effect of an acetylene bond on hydrogen adsorption in diamond-like carbon allotropes: from first principles to atomic simulation.

    Science.gov (United States)

    Wu, Xuanjun; Li, Lei; Fang, Tiange; Wang, YeTong; Cai, Weiquan; Xiang, Zhonghua

    2017-03-29

    By inserting an acetylene bond into the organic linkers of porous materials, hydrogen storage can be significantly enhanced; however, the mechanism of this enhancement remains elusive. Herein, we developed a new diamond-like carbon allotrope (referred as diamond-like diacetylene a.k.a. DDA) with medium pores constructed by inserting -C[triple bond, length as m-dash]C-C[triple bond, length as m-dash]C- ligands into the -C-C- bonds of diamond. The structural, mechanical, and electrical properties, as well as hydrogen storage capacities were investigated for this novel material using density functional theory and Monte Carlo simulations. The optimized geometry of DDA shows a high surface area and free pore volume of ca. 5498.76 m(2) g(-1) and 2.0486 m(3) g(-1), respectively. DDA also exhibits structural stability and special electronic properties. Interestingly, DDA exhibits exceptional gravimetric hydrogen storage capacity as well as volumetric one. The excess gravimetric and volumetric H2 uptakes at 77 K and 2.0 MPa hit a maximum of 14.12 wt% and 603.35 cm(3) (STP) cm(-3), respectively, which substantially exceeds those previously reported for MOF or PAF materials. Even at 243 K and 12 MPa, the total gravimetric H2 uptake of DDA reaches 5.38 wt%. To the best of our knowledge, DDA is one of porous materials with the maximum physical hydrogen uptake. It is also one of the few materials that can be close to meeting hydrogen storage target of the US department of energy at room temperature. Significantly, DDA shows the deliverable hydrogen storage capacity up to 5.28 wt% at room temperature. Through analyzing the effect of the acetylene position in the DLCAs on their hydrogen storage capacities, we found that the high hydrogen adsorption performance of DDA is mainly attributed to its high surface area, large number of adsorption sites, and appropriate binding energy. In summary, the newly developed DDA is a promising candidate for hydrogen storage and provides a new

  2. Preparation and Properties of Ag-Containing Diamond-Like Carbon Films by Magnetron Plasma Source Ion Implantation

    Directory of Open Access Journals (Sweden)

    K. Baba

    2012-01-01

    Full Text Available The doping effect of silver on the structure and properties of diamond-like carbon (DLC films was investigated. The samples were prepared by a process combining acetylene plasma source ion implantation (high-voltage pulses of −10 kV with reactive magnetron sputtering of an Ag disc. A mixture of two gases, argon, and acetylene was introduced into the discharge chamber as working gas for plasma formation. A negative high-voltage pulse was applied to the substrate holder, thus, accelerating ions towards the substrate. The chemical composition of the deposited films was modified by the respective gas flows and determined using X-ray photoelectron spectroscopy and secondary ion mass spectrometry. The silver concentration within the DLC films influenced the structure and the tribological properties. The surface roughness, as observed by scanning electron microscopy, increased with silver concentration. The film structure was characterized by Raman spectroscopy and X-ray diffractometry (XRD. The DLC films were mainly amorphous, containing crystalline silver, with the amount of silver depending on the process conditions. The tribological properties of the films were improved by the silver doping. The lowest friction coefficient of around 0.06 was derived at a low silver content.

  3. Structural and optical properties of gold-incorporated diamond-like carbon thin films deposited by RF magnetron sputtering

    Science.gov (United States)

    Majeed, Shahbaz; Siraj, K.; Naseem, S.; Khan, Muhammad F.; Irshad, M.; Faiz, H.; Mahmood, A.

    2017-07-01

    Pure and gold-doped diamond-like carbon (Au-DLC) thin films are deposited at room temperature by using RF magnetron sputtering in an argon gas-filled chamber with a constant flow rate of 100 sccm and sputtering time of 30 min for all DLC thin films. Single-crystal silicon (1 0 0) substrates are used for the deposition of pristine and Au-DLC thin films. Graphite (99.99%) and gold (99.99%) are used as co-sputtering targets in the sputtering chamber. The optical properties and structure of Au-DLC thin films are studied with the variation of gold concentration from 1%-5%. Raman spectroscopy, atomic force microscopy (AFM), Vickers hardness measurement (VHM), and spectroscopic ellipsometry are used to analyze these thin films. Raman spectroscopy indicates increased graphitic behavior and reduction in the internal stresses of Au-DLC thin films as the function of increasing gold doping. AFM is used for surface topography, which shows that spherical-like particles are formed on the surface, which agglomerate and form larger clusters on the surface by increasing the gold content. Spectroscopy ellipsometry analysis elucidates that the refractive index and extinction coefficient are inversely related and the optical bandgap energy is decreased with increasing gold content. VHM shows that gold doping reduces the hardness of thin films, which is attributed to the increase in sp2-hybridization.

  4. Surface Structure of Hydrogenated Diamond-like Carbon: Origin of Run-In Behavior Prior to Superlubricious Interfacial Shear

    Energy Technology Data Exchange (ETDEWEB)

    Al-Azizi, Ala A; Eryilmaz, Osman; Erdemir, Ali; Kim, Seong H.

    2015-01-01

    The oxidized layers at the surface of hydrogenated diamond-like carbon (H-DLC) were studied with X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure, and Raman spectroscopy. The structure of these layers was correlated with the friction and wear behavior observed on H-DLC. H-DLC is well-known for its ultralow friction in inert environments, but the steady superlubricious state is always preceded by a run-in period with a high friction. It was hypothesized that the run-in period is related to the surface oxide layer formed naturally upon exposure of the sample to air. To test this hypothesis, thermal oxide layers were grown, and their structures were analyzed and compared with the native oxide layer on a pristine sample. It was found that the Raman spectra of the surface oxide layers of H-DLC have higher D/G band ratio than the bulk, indicating a larger amount of aromatic clusters compared to the bulk film. Thick oxide layers grown at 300 °C showed a run-in friction behavior that resembled the friction of graphite. The run-in periods were found to become longer when the thickness of the oxide layers increased, indicating that the run-in behavior of H-DLC is attributed to the removal of the surface oxide layers.

  5. Diamond-like carbon layers modified by ion bombardment during growth and researched by Resonant Ultrasound Spectroscopy

    Science.gov (United States)

    Kocourek, Tomáš; Jelínek, Miroslav; Písařík, Petr; Remsa, Jan; Janovská, Michaela; Landa, Michal; Zemek, Josef; Havránek, Vladimír

    2017-09-01

    Biocompatible Diamond-Like Carbon (DLC) films were prepared by Pulsed Laser Deposition technique using the laser energy density of 10 J cm-2 on the graphite target. The surface of the grown film was modified during the deposition by bombardment with argon, xenon, nitrogen or oxygen ions. The ion energy (up to 150 eV) was changed by gun voltage and by ionic current. The films with high and low diamond/graphite content were prepared. Physical and mechanical properties of biocompatible DLC thin layers prepared by hybrid laser technology were studied. The composition of layers and the content trace elements were determined by the methods of Rutherford Backscattering Spectrometry and Particle Induced X-ray Emission. The content of sp2 and sp3 bonds was measured using X-ray Photoelectron Spectroscopy. For different energy of argon and oxygen ions the maximum of sp3 bonds content was found (83.63% of sp3 bonds for argon ions). All films were smooth, which was confirmed by profilometry and Atomic Force Microscopy measurements. Maximum roughness Ra and RMS was did not exceed 1 nm. The Younǵs and shear moduli were studied by Resonant Ultrasound Spectroscopy. The Young's Modulus attained the value of 601 GPa and the shear Modulus attained the value of 253 GPa at the energy of 30 eV of Ar ions. The influence of ion bombardment on DLC film properties is discussed.

  6. Effects of nitrogen content on structure and electrical properties of nitrogen-doped fluorinated diamond-like carbon films

    Institute of Scientific and Technical Information of China (English)

    XIAO Jian-rong; LI Xin-hai; WANG Zhi-xing

    2009-01-01

    Nitrogen-doped fluorinated diamond-like carbon (FN-DLC) films were prepared on single crystal silicon substrate by radio frequency plasma enhanced chemical vapor deposition (RF-PECVD) under different deposited conditions with CF4,CH4 and nitrogen as source gases.The influence of nitrogen content on the structure and electrical properties of the films was studied.The films were investigated in terms of surface morphology,microstructure,chemical composition and electrical properties.Atomic force microscopy (AFM) results revealed that the surface morphology of the films became smooth due to doping nitrogen.Fourier transform infrared absorption spectrometry (FTIR) results showed that amouts of C=N and C≡N bonds increased gradually with increasing nitrogen partial pressure r (r=p(N_2)/p(N_2+CF_4+CH_4)).Gaussian fit results of C 1s and N 1s in X-ray photoelectron spectra (XPS) showed that the incorporation of nitrogen presented mainly in the forms of β-C_3N_4 and a-CN_x (x=1,2,3) in the films.The current-voltage (I-V) measurement results showed that the electrical conductivity of the films increased with increasing nitrogen content.

  7. Influence of Hydrogen Content on Optical and Mechanical Performances of Diamond-Like Carbon Films on Glass Substrate

    Science.gov (United States)

    Sun, Yao; Huang, Xing-Ye; Wang, Hong

    2016-04-01

    The protective layer for cover glass of touch panel screen for electronic mobile devices is required to have good mechanical properties and decent optical transparency simultaneously. The hydrogenated diamond-like carbon (a-C:H) films were deposited on glass substrate by RF-PECVD in the negative stage potential mode (NP mode), as well as the ground stage potential mode (GP mode). The impact of hydrogen content, affected by stage potential and RF power, on optical and mechanical properties was investigated. The results show that hydrogen content decreases with increasing RF power, due to the dehydrogenation effect. Higher hydrogen content in films results in lower refractive index, lower extinction coefficient, lower optical absorptions, larger optical band gap and higher transmittance, but lower hardness and wearing resistance. Therefore, although the GP mode DLC is optically favorable because of higher hydrogen content, the NP mode one is far more superior from mechanical standpoint. A compromise can be reached to deposit an ultrathin layer of DLC in NP mode, which offers a good combination of properties to meet the requirement for the protective layer of cover glass.

  8. Fluorine and boron co-doped diamond-like carbon films deposited by pulsed glow discharge plasma immersion ion processing

    CERN Document Server

    He, X M; Peters, A M; Taylor, B; Nastasi, M

    2002-01-01

    Fluorine (F) and boron (B) co-doped diamond-like carbon (FB-DLC) films were prepared on different substrates by the plasma immersion ion processing (PIIP) technique. A pulse glow discharge plasma was used for the PIIP deposition and was produced at a pressure of 1.33 Pa from acetylene (C sub 2 H sub 2), diborane (B sub 2 H sub 6), and hexafluoroethane (C sub 2 F sub 6) gas. Films of FB-DLC were deposited with different chemical compositions by varying the flow ratios of the C sub 2 H sub 2 , B sub 2 H sub 6 , and C sub 2 F sub 6 source gases. The incorporation of B sub 2 H sub 6 and C sub 2 F sub 6 into PIIP deposited DLC resulted in the formation of F-C and B-C hybridized bonding structures. The levels of the F and B concentrations effected the chemical bonding and the physical properties as was evident from the changes observed in density, hardness, stress, friction coefficient, and contact angle of water on films. Compared to B-doped or F-doped DLC films, the F and B co-doping of DLC during PIIP deposition...

  9. Studies of diamond-like carbon (DLC) films deposited on stainless steel substrate with Si/SiC intermediate layers

    Institute of Scientific and Technical Information of China (English)

    Wang Jing; Liu Gui-Chang; Wang Li-Da; Deng Xin-Lü; Xu Jun

    2008-01-01

    In this work, diamond-like carbon (DLC) films were deposited on stainless steel substrates with Si/SiC intermediate layers by combining plasma enhanced sputtering physical vapour deposition (PEUMS-PVD) and microwave electron cyclotron resonance plasma enhanced chemical vapour deposition (MW-ECRPECVD) techniques. The influence of substrate negative self-bias voltage and Si target power on the structure and nano-mechanical behaviour of the DLC films were investigated by Raman spectroscopy, nano-indentation, and the film structural morphology by atomic force microscopy (AFM). With the increase of deposition bias voltage, the G band shifted to higher wave-number and the integrated intensity ratio ID/IG increased. We considered these as evidences for the development of graphitization in the films. As the substrate negative self-bias voltage increased, particle bombardment function was enhanced and thesp3-bond carbon density reducing, resulted in the peak values of hardness (H) and elastic modulus (E). Silicon addition promoted the formation of sp3 bonding and reduced the hardness. The incorporated Si atoms substituted sp2- bond carbon atoms in ring structures, which promoted the formation of sp3-bond. The structural transition from C-C to C-Si bonds resulted in relaxation of the residual stress which led to the decrease of internal stress and hardness. The results of AFM indicated that the films was dense and homogeneous, the roughness of the films was decreased due to the increase of substrate negative self-bias voltage and the Si target power.

  10. Investigation of superfast deposition of metal oxide and Diamond-Like Carbon thin films by nanosecond Ytterbium (Yb+) fiber laser

    Science.gov (United States)

    Serbezov, V.; Sotirov, S.; Benkhouja, K.; Zawadzka, A.; Sahraoui, B.

    2013-11-01

    Metal oxide (MOx, M: titanium, magnesium) and Diamond-Like Carbon (DLC) thin films were synthesized by Pulsed Laser Deposition (PLD) at room temperature and low vacuum of 2 Pa for MOx and vacuum of 4 × 10-3 Pa for DLC films. A fiber based Ytterbium (Yb+) laser operating in the nanosecond regime at a repetition rate of 20 kHz was used as an ablation source. Dense and smooth thin films with a thickness from 120 to 360 nm and an area of up to 10 cm2 were deposited on glass and stainless steel substrates at high growth rates up to 2 nm/s for a laser intensity of 10-12 J/cm2. The thin films synthesis was compared for two fiber laser modes of operation, at a repetition rate of 20 kHz and with an additional modulation at 1 kHz. The morphology, chemical composition and structure of the obtained thin films were evaluated using optical microscopy, Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Spectroscopy (EDX) and Raman spectroscopy. The morphology of the MOx thin films and the deposition rate strongly depend on the fiber laser mode of operation. Very smooth surfaces were obtained for the metal oxide thin films deposited at lower deposition rates in the modulation mode at 1 kHz. The effect of the substrate on the DLC film structure was studied. The films deposited on dielectric substrates were identified as typical tetrahedral (ta-C) DLC with high sp3 content. DLC films on metal substrates were found typical a-C amorphous carbon films with mixing sp2/sp3 bonds.

  11. Cell adhesion and growth on ultrananocrystalline diamond and diamond-like carbon films after different surface modifications

    Energy Technology Data Exchange (ETDEWEB)

    Miksovsky, J. [Institute of Nanostructure Technologies and Analytics, Center for Interdisciplinary Nanostructure Science and Technology, University of Kassel (Germany); Institute of Physics ASCR, Prague (Czech Republic); Czech Technical University in Prague, Faculty of Biomedical Engineering, Kladno (Czech Republic); Voss, A. [Institute of Nanostructure Technologies and Analytics, Center for Interdisciplinary Nanostructure Science and Technology, University of Kassel (Germany); Kozarova, R. [Institute of Molecular Biology, Bulgarian Academy of Sciences, Sofia (Bulgaria); Kocourek, T.; Pisarik, P. [Institute of Physics ASCR, Prague (Czech Republic); Czech Technical University in Prague, Faculty of Biomedical Engineering, Kladno (Czech Republic); Ceccone, G. [Unit Nanobiosciences, European Commission Joint Research Centre, Ispra (Italy); Kulisch, W. [Institute of Nanostructure Technologies and Analytics, Center for Interdisciplinary Nanostructure Science and Technology, University of Kassel (Germany); Jelinek, M. [Institute of Physics ASCR, Prague (Czech Republic); Czech Technical University in Prague, Faculty of Biomedical Engineering, Kladno (Czech Republic); Apostolova, M.D. [Institute of Molecular Biology, Bulgarian Academy of Sciences, Sofia (Bulgaria); Reithmaier, J.P. [Institute of Nanostructure Technologies and Analytics, Center for Interdisciplinary Nanostructure Science and Technology, University of Kassel (Germany); Popov, C., E-mail: popov@ina.uni-kassel.de [Institute of Nanostructure Technologies and Analytics, Center for Interdisciplinary Nanostructure Science and Technology, University of Kassel (Germany)

    2014-04-01

    Graphical abstract: - Highlights: • UNCD and DLC films were modified by UV/O{sub 3} treatments, O{sub 2} or NH{sub 3}-containing plasmas. • Surface composition, wettability and surface energy change upon modifications. • Higher efficiency of UNCD modifications was observed. • Cell attachment and growth were influenced by the surface termination and roughness. - Abstract: Diamond and diamond-like carbon (DLC) films possess a set of excellent physical and chemical properties which together with a high biocompatibility make them attractive candidates for a number of medical and biotechnological applications. In the current work thin ultrananocrystalline diamond (UNCD) and DLC films were comparatively investigated with respect to cell attachment and proliferation after different surface modifications. The UNCD films were prepared by microwave plasma enhanced chemical vapor deposition, the DLC films by pulsed laser deposition (PLD). The films were comprehensively characterized with respect to their basic properties, e.g. crystallinity, morphology, chemical bonding nature, etc. Afterwards the UNCD and DLC films were modified applying O{sub 2} or NH{sub 3}/N{sub 2} plasmas and UV/O{sub 3} treatments to alter their surface termination. The surface composition of as-grown and modified samples was studied by X-ray photoelectron spectroscopy (XPS). Furthermore the films were characterized by contact angle measurements with water, formamide, 1-decanol and diiodomethane; from the results obtained the surface energy with its dispersive and polar components was calculated. The adhesion and proliferation of MG63 osteosarcoma cells on the different UNCD and DLC samples were assessed by measurement of the cell attachment efficiency and MTT assays. The determined cell densities were compared and correlated with the surface properties of as-deposited and modified UNCD and DLC films.

  12. Structural properties and surface wettability of Cu-containing diamond-like carbon films prepared by a hybrid linear ion beam deposition technique

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Peng; Sun, Lili; Li, Xiaowei [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Xu, Sheng [Gao Hong Coating Technology Co., Ltd, Huzhou 313000 (China); Ke, Peiling [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Wang, Aiying, E-mail: aywang@nimte.ac.cn [Key Laboratory of Marine Materials and Related Technologies, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China)

    2015-06-01

    Cu-containing diamond-like carbon (Cu-DLC) films were deposited on Si/glass substrate by a hybrid ion beam deposition system. The Cu concentration (0.1–39.7 at.%) in the film was controlled by varying the sputtering current. The microstructure and composition of Cu-DLC films were investigated systematically. The surface topography, roughness and surface wettability of the films were also studied. Results indicated that with increasing the Cu concentration, the water contact angle of the films changed from 66.8° for pure carbon film to more than 104.4° for Cu-DLC films with Cu concentration larger than 24.4 at.%. In the hydrophilic region, the polar surface energy decreased from 30.54 mJ/m{sup 2} for pure carbon film to 2.48 mJ/m{sup 2} for the film with Cu 7.0 at.%. - Highlights: • Cu-containing diamond-like carbon (DLC) films were deposited by a hybrid ion beam system. • Cu-containing DLC films exhibited a wide range of water contact angle. • The water contact angles vary with the surface energies and surface roughness.

  13. Structure and properties of Mo-containing diamond-like carbon films produced by ion source assisted cathodic arc ion-plating

    Energy Technology Data Exchange (ETDEWEB)

    Wang, L.L. [Key Laboratory of Artificial Micro- and Nano-Materials of Ministry of Education and School of Physics and Technology, Wuhan University, Wuhan 430072 China (China); Wang, R.Y. [School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072 (China); Yan, S.J.; Zhang, R. [Key Laboratory of Artificial Micro- and Nano-Materials of Ministry of Education and School of Physics and Technology, Wuhan University, Wuhan 430072 China (China); Yang, B. [School of Power and Mechanical Engineering, Wuhan University, Wuhan 430072 (China); Zhang, Z.D.; Huang, Z.H. [Key Laboratory of Artificial Micro- and Nano-Materials of Ministry of Education and School of Physics and Technology, Wuhan University, Wuhan 430072 China (China); Fu, D.J., E-mail: djfu@whu.edu.cn [Key Laboratory of Artificial Micro- and Nano-Materials of Ministry of Education and School of Physics and Technology, Wuhan University, Wuhan 430072 China (China)

    2013-12-01

    Ion source assisted cathodic arc ion-plating was used to synthesize molybdenum containing diamond-like carbon films. The element of molybdenum is uniformly distributed in our sample as analyzed by Rutherford backscattering spectroscopy. The surface morphology of the films was analyzed by scanning electron microscope and atomic force microscope. The structure and bond state of the molybdenum containing diamond-like carbon films were characterized by X-ray diffraction, high resolution transmission electron microscopy, Raman spectra, and X-ray photoelectron spectroscopy. The Mo content in the films was controlled by varying of the acetylene gas flow rates. The root-mean square roughness of the as-deposited sample was found in the range of 1.5 nm. The hardness of 35 GPa has been achieved at the optimum conditions of synthesis. This can be attributed to formation multilayer structure during deposition process and the formation of hard molybdenum carbide phase with C=Mo bonding. The results show that ion source assisted cathodic arc ion-plating is an effective technique to fabricate metal-containing carbon films with controlled metal contents.

  14. Preparation of Ag-containing diamond-like carbon films on the interior surface of tubes by a combined method of plasma source ion implantation and DC sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Hatada, R., E-mail: hatada@ca.tu-darmstadt.de [Technische Universität Darmstadt, Department of Materials Science, 64287 Darmstadt (Germany); Flege, S.; Bobrich, A.; Ensinger, W.; Dietz, C. [Technische Universität Darmstadt, Department of Materials Science, 64287 Darmstadt (Germany); Baba, K. [Industrial Technology Center of Nagasaki, Applied Technology Division, Omura, Nagasaki 856-0026 (Japan); Sawase, T.; Watamoto, T. [Nagasaki University, Department of Applied Prosthodontics, Nagasaki 852-8523 (Japan); Matsutani, T. [Technische Universität Darmstadt, Department of Materials Science, 64287 Darmstadt (Germany); Kinki University, Department of Electric and Electronic Engineering, Higashi-osaka 577-2332 (Japan)

    2014-08-15

    Highlights: • Deposition of Ag-containing diamond-like carbon films inside of tubes. • Combination of plasma source ion implantation and DC sputtering. • Antibacterial effect against S. aureus bacteria. - Abstract: Adhesive diamond-like carbon (DLC) films can be prepared by plasma source ion implantation (PSII), which is also suitable for the treatment of the inner surface of a tube. Incorporation of a metal into the DLC film provides a possibility to change the characteristics of the DLC film. One source for the metal is DC sputtering. In this study PSII and DC sputtering were combined to prepare DLC films containing low concentrations of Ag on the interior surfaces of stainless steel tubes. A DLC film was deposited using a C{sub 2}H{sub 4} plasma with the help of an auxiliary electrode inside of the tube. This electrode was then used as a target for the DC sputtering. A mixture of the gases Ar and C{sub 2}H{sub 4} was used to sputter the silver. By changing the gas flow ratios and process time, the resulting Ag content of the films could be varied. Sample characterizations were performed by X-ray photoelectron spectroscopy, secondary ion mass spectrometry, atomic force microscopy and Raman spectroscopy. Additionally, a ball-on-disk test was performed to investigate the tribological properties of the films. The antibacterial activity was determined using Staphylococcus aureus bacteria.

  15. Patterning of diamond like carbon films for sensor applications using silicon containing thermoplastic resist (SiPol) as a hard mask

    Energy Technology Data Exchange (ETDEWEB)

    Virganavičius, D. [Paul Scherrer Institute, Laboratory for Micro- and Nanotechnology, 5232 Villigen PSI (Switzerland); Kaunas University of Technology, Institute of Materials Science, 51423 Kaunas (Lithuania); Cadarso, V.J.; Kirchner, R. [Paul Scherrer Institute, Laboratory for Micro- and Nanotechnology, 5232 Villigen PSI (Switzerland); Stankevičius, L.; Tamulevičius, T.; Tamulevičius, S. [Kaunas University of Technology, Institute of Materials Science, 51423 Kaunas (Lithuania); Schift, H., E-mail: helmut.schift@psi.ch [Paul Scherrer Institute, Laboratory for Micro- and Nanotechnology, 5232 Villigen PSI (Switzerland)

    2016-11-01

    Highlights: • Nanopatterning of thin diamond-like carbon (DLC) films and silver containing DLC composites. • Nanoimprint lithography with thermoplastic silicon containing resist. • Zero-residual layer imprinting and pattern transfer by reactive ion etching. • Robust leaky waveguide sensors with sensitivity up to 319 nm/RIU. - Abstract: Patterning of diamond-like carbon (DLC) and DLC:metal nanocomposites is of interest for an increasing number of applications. We demonstrate a nanoimprint lithography process based on silicon containing thermoplastic resist combined with plasma etching for straightforward patterning of such films. A variety of different structures with few hundred nanometer feature size and moderate aspect ratios were successfully realized. The quality of produced patterns was directly investigated by the means of optical and scanning electron microscopy (SEM). Such structures were further assessed by employing them in the development of gratings for guided mode resonance (GMR) effect. Optical characterization of such leaky waveguide was compared with numerical simulations based on rigorous coupled wave analysis method with good agreement. The use of such structures as refractive index variation sensors is demonstrated with sensitivity up to 319 nm/RIU, achieving an improvement close to 450% in sensitivity compared to previously reported similar sensors. This pronounced GMR signal fully validates the employed DLC material, the technology to pattern it and the possibility to develop DLC based gratings as corrosion and wear resistant refractometry sensors that are able to operate under harsh conditions providing great value and versatility.

  16. Electron Cyclotron Resonance-Sputtered Nanocarbon Film Electrode Compared with Diamond-Like Carbon and Glassy Carbon Electrodes as Regards Electrochemical Properties and Biomolecule Adsorption

    Science.gov (United States)

    Xue, Qiang; Kato, Dai; Kamata, Tomoyuki; Umemura, Shigeru; Hirono, Shigeru; Niwa, Osamu

    2012-09-01

    The electrochemical properties and biocompatible characteristics at an electron cyclotron resonance (ECR)-sputtered nanocarbon film electrode, a diamond-like carbon (DLC) electrode and a glassy carbon (GC) electrode have been studied. The three carbon electrodes show significant current reductions with increased peak separations as a result of protein fouling before oxygen plasma treatment, but the current reductions of the ECR-sputtered nanocarbon and DLC film electrodes are smaller than that of the GC electrode due to their superior surface flatness. The oxygen plasma pretreated ECR-sputtered nanocarbon film electrode exhibits a significant improvement in anti-fouling performance with an improved electron transfer. This is because the pretreated ECR-sputtered nanocarbon film enabled the surface to introduce surface oxygen functionalities that not only improve the interaction between the analytes and the electrode surface but also make the film surface more hydrophilic, which is important for the suppression of biomolecule adsorption. At the same time, the pretreated ECR-sputtered nanocarbon film also retained an ultraflat surface even after pretreatment as a result of the low background current. This excellent performance can only be achieved with our ECR-sputtered nanocarbon film, indicating that our film is promising for application to electrochemical detectors for various biomolecular analytes.

  17. Preparation of Metal-Containing Diamond-Like Carbon Films by Magnetron Sputtering and Plasma Source Ion Implantation and Their Properties

    Directory of Open Access Journals (Sweden)

    Stefan Flege

    2017-01-01

    Full Text Available Metal-containing diamond-like carbon (Me-DLC films were prepared by a combination of plasma source ion implantation (PSII and reactive magnetron sputtering. Two metals were used that differ in their tendency to form carbide and possess a different sputter yield, that is, Cu with a relatively high sputter yield and Ti with a comparatively low one. The DLC film preparation was based on the hydrocarbon gas ethylene (C2H4. The preparation technique is described and the parameters influencing the metal content within the film are discussed. Film properties that are changed by the metal addition, such as structure, electrical resistivity, and friction coefficient, were evaluated and compared with those of pure DLC films as well as with literature values for Me-DLC films prepared with a different hydrocarbon gas or containing other metals.

  18. Performance evaluation of different diamond-like carbon samples as charge state conversion surfaces for neutral atom imaging detectors in space applications

    Science.gov (United States)

    Brigitte Neuland, Maike; Allenbach, Marc; Föhn, Martina; Wurz, Peter

    2017-04-01

    The detection of energetic neutral atoms is a substantial requirement on every space mission mapping particle populations of a planetary magnetosphere or plasma of the interstellar medium. For imaging neutrals, these first have to be ionised. Regarding the constraints of weight, volume and power consumption, the technique of surface ionisation complies with all specifications of a space mission. Particularly low energy neutral atoms, which cannot be ionised by passing through a foil, are ionised by scattering on a charge state conversion surface [1]. Since more than 30 years intense research work is done to find and optimise suitable materials for use as charge state conversion surfaces for space application. Crucial parameters are the ionisation efficiency of the surface material and the scattering properties. Regarding these parameters, diamond-like carbon was proven advantageously: While efficiently ionising incoming neutral atoms, diamond stands out by its durability and chemical inertness [2]. In the IBEX-Lo sensor, a diamond-like carbon surface is used for ionisation of neutral atoms. Building on the successes of the IBEX mission [3], the follow up mission IMAP (InterstellarMApping Probe) will take up to further explore the boundaries of the heliosphere. The IMAP mission is planned to map neutral atoms in a larger energy range and with a distinct better angular resolution and sensitivity than IBEX [4]. The aspired performance of the IMAP sensors implies also for charge state conversion surfaces with improved characteristics. We investigated samples of diamond-like carbon, manufactured by the chemical vapour deposition (CVD) method, regarding their ionisation efficiency, scattering and reflexion properties. Experiments were carried out at the ILENA facility at the University of Bern [5] with hydrogen and oxygen atoms, which are the species of main interest in magnetospheric research [1]. We compare the results of earlier investigations of a metallised CVD

  19. Thermal Characteristics of InGaN/GaN Flip-Chip Light Emitting Diodes with Diamond-Like Carbon Heat-Spreading Layers

    Directory of Open Access Journals (Sweden)

    Pai-Yang Tsai

    2014-01-01

    Full Text Available The temperature-dependent optical, electrical, and thermal properties of flip-chip light emitting diodes (FCLEDs with diamond-like carbon (DLC heat-spreading layers were investigated. On the basis of the measured results in the 20°C to 100°C temperature range, a significant performance improvement can be achieved for FCLEDs with DLC heat-spreading layers (DLC-FCLED compared with FCLEDs without DLC heat-spreading layers (non-DLC-FCLED. The external quantum efficiency (EQE of the DLC-FCLED improves by 9% at an injection current of 1000 mA and a temperature of 100°C. The forward voltage and spectra variations are smaller than those of non-DLC-FCLEDs. The DLC-FCLED provides high efficiency and high stability performance for high-power and high-temperature applications.

  20. Thickness Effects of TiC Interlayer on Tribological Properties of Diamond-Like Carbon Prepared by Unbalanced Magnetron Sputtering Method.

    Science.gov (United States)

    Park, Chulmin; Lee, Jaehyeong; Park, Yong Seob

    2015-11-01

    We investigated the tribological properties of diamond-like carbon (DLC) films prepared with TiC interlayer of various thicknesses as the adhesive layer. DLC and TiC thin films were prepared using unbalanced magnetron (UBM) sputtering method using graphite and titanium as targets. TiC films as the interlayer were deposited under DLC films and various physical, tribological, and structural properties of the films fabricated with various TiC interlayer thicknesses were investigated. With various TiC interlayer thicknesses under DLC films, the tribological properties of films were improved with increasing thickness and the DLC/TiC layer fabricated by unbalanced magnetron sputtering method are exhibited maximum high hardness over 27 GPa and high elastic modulus over 242 GPa, and a smooth surface below 0.09 nm.

  1. Low reflection and high transmission by a layered structure containing diamond-like carbon, porous silicon, and left-handed material

    Science.gov (United States)

    Ubeid, Muin F.; Shabat, Mohammed M.; Altanany, Sameh M.

    2017-03-01

    In this paper, we propose and theoretically analyze a stratified waveguide structure comprised of diamond-like carbon (DLC), porous silicon (PS), and left-handed material (LHM) subjected to incident light in order to achieve low reflection and high transmission. The proposed waveguide structure is situated between two half free spaces and a TE polarized plane wave incident on it. The main parameters of each material are given and the required equations for the electromagnetic plane wave propagation are presented. Transfer matrix method is implemented to find out the characteristics of the reflected and transmitted powers. In the numerical results, the mentioned powers are computed and illustrated as a function of the incidence angle, the frequency, and the slab thickness to demonstrate the main parameters for low reflection and high transmission. These theoretical parameters could be useful to the researchers and designers working in the area of solar cells and optical sensors.

  2. Optical properties of diamond like carbon films containing copper, grown by high power pulsed magnetron sputtering and direct current magnetron sputtering: Structure and composition effects

    Energy Technology Data Exchange (ETDEWEB)

    Meškinis, Š., E-mail: sarunas.meskinis@ktu.lt; Čiegis, A.; Vasiliauskas, A.; Šlapikas, K.; Tamulevičius, T.; Tamulevičienė, A.; Tamulevičius, S.

    2015-04-30

    In the present study chemical composition, structure and optical properties of hydrogenated diamond like carbon films containing copper (DLC:Cu films) deposited by reactive magnetron sputtering were studied. Different modes of deposition — direct current (DC) sputtering and high power pulsed magnetron sputtering (HIPIMS) as well as two configurations of the magnetron magnetic field (balanced and unbalanced) were applied. X-ray diffractometry, Raman scattering spectroscopy, energy-dispersive X-ray spectroscopy and atomic force microscopy were used to study the structure and composition of the films. It was shown that by using HIPIMS mode contamination of the cathode during the deposition of DLC:Cu films can be suppressed. In all cases oxygen atomic concentration in the films was in 5–10 at.% range and it increased with the copper atomic concentration. The highest oxygen content was observed in the films deposited employing low ion/neutral ratio balanced DC magnetron sputtering process. According to the analysis of the parameters of Raman scattering spectra, sp{sup 3}/sp{sup 2} bond ratio decreased with the increase of Cu atomic concentration in the DLC films. Clear dependence of the extinction, absorbance and reflectance spectra on copper atomic concentration in the films was observed independently of the method of deposition. Surface plasmon resonance effect was observed only when Cu atomic concentration in DLC:Cu film was at least 15 at.%. The maximum of the surface plasmon resonance peak of the absorbance spectra of DLC:Cu films was in 600–700 nm range and redshifted with the increase of Cu amount. The ratio between the intensities of the plasmonic peak and hydrogenated amorphous carbon related peak at ~ 220 nm both in the extinction and absorbance spectra as well as peak to background ratio of DLC:Cu films increased linearly with Cu amount in the investigated 0–40 at.% range. Reflectance of the plasmonic DLC:Cu films was in 30–50% range that could be

  3. Estudo comparativo randomizado do implante de Stent de aço inoxidável recoberto por carbono semelhante ao diamante versus não recoberto em pacientes com doença arterial coronariana Randomized comparative study of diamond-like carbon coated stainless steel stent versus uncoated stent implantation in patients with coronary artery disease

    Directory of Open Access Journals (Sweden)

    George César Ximenes Meireles

    2007-04-01

    Full Text Available OBJETIVO: Comparar as taxas de reestenose e de eventos cardíacos maiores em um e seis meses pós-implante de stents recobertos com CSD com os não-recobertos. MÉTODOS: Estudo comparativo, prospectivo, randomizado, de 180 pacientes com diagnóstico de insuficiência coronária, submetidos a implante de stent recoberto com CSD (Phytis® ou stent não-recobertos (Penta®, no período de janeiro de 2003 a julho de 2004. Foram critérios de inclusão: lesão de novo com porcentual de estenose em diâmetro > 50% em artéria coronária com diâmetro de referência > 2,5 mm e OBJECTIVE: To compare restenosis and major cardiac event rates at one and six months after DLC-coated stent implantation with those of uncoated stents. METHODS: Randomized, prospective, comparative study of 180 patients with coronary insufficiency undergoing DLC coated stent (Phytis™ or uncoated stent (Penta™ implantation, from January, 2003 to July, 2004. Inclusion criteria were: de novo lesion with >50% diameter stenosis in a coronary artery with reference diameter > 2,5 mm and < 4 mm, and length < 20 mm. Exclusion criteria were: left main coronary artery and bifurcation lesions, chronic total occlusion, and in-stent restenosis. RESULTS: Clinical and angiographic baseline characteristics of the groups were similar. Procedural success was achieved in 98.9% of the patients in both groups. One cardiac death occurred in each group during hospitalization. Reference diameter and acute gain were greater in the Penta™ group (3.21±0.37 mm vs. 3.34±0.8 mm, p=0.02 and 2.3±0.5 vs. 2.49±0.5, p=0.009, respectively. Angiographic follow-up at six months showed similar rates of restenosis (24.3% vs. 21.8%, p=0.84 and of major cardiac events (16.8% vs. 17.5%, p=1. CONCLUSION: DLC coated stents did not provide better outcomes in relation to uncoated stents.

  4. Incorporation of Si and SiO(x) into diamond-like carbon films: impact on surface properties and osteoblast adhesion.

    Science.gov (United States)

    Randeniya, L K; Bendavid, A; Martin, P J; Amin, Md S; Preston, E W; Magdon Ismail, F S; Coe, S

    2009-06-01

    The interaction of human osteoblast cells with diamond-like carbon films incorporating silicon and silicon oxide (SiO(x), 1 activated chemical vapour deposition method was investigated. Cell culture studies were performed for films with Si contents ranging from approximately 4 at.% to 15 at.%. Substantial differences between Si-incorporated and SiO(x)-incorporated films were found for the bonding environments of Si atoms and the hybridization of underlying carbon structures. However, osteoblast-attachment studies did not show statistically significant trends in properties of cell growth (count, area and morphology) that can be attributed either to the Si content of the films or to the chemical structure of the films. The surface energy decreased by 40% as the Si content of the SiO(x) incorporated DLC films increased to 13 at.%. The cell adhesion properties however did not change in response to lowering of the surface energy. The incorporation of both Si and SiO(x) leads to a beneficial reduction in the residual stress of the films. The average roughness of the films increases and the hardness decreases when Si and SiO(x) are added to DLC films. The impact of these changes for load-bearing biomedical applications can be determined only by carefully controlled experiments using anatomic simulators.

  5. Patterning of diamond like carbon films for sensor applications using silicon containing thermoplastic resist (SiPol) as a hard mask

    Science.gov (United States)

    Virganavičius, D.; Cadarso, V. J.; Kirchner, R.; Stankevičius, L.; Tamulevičius, T.; Tamulevičius, S.; Schift, H.

    2016-11-01

    Patterning of diamond-like carbon (DLC) and DLC:metal nanocomposites is of interest for an increasing number of applications. We demonstrate a nanoimprint lithography process based on silicon containing thermoplastic resist combined with plasma etching for straightforward patterning of such films. A variety of different structures with few hundred nanometer feature size and moderate aspect ratios were successfully realized. The quality of produced patterns was directly investigated by the means of optical and scanning electron microscopy (SEM). Such structures were further assessed by employing them in the development of gratings for guided mode resonance (GMR) effect. Optical characterization of such leaky waveguide was compared with numerical simulations based on rigorous coupled wave analysis method with good agreement. The use of such structures as refractive index variation sensors is demonstrated with sensitivity up to 319 nm/RIU, achieving an improvement close to 450% in sensitivity compared to previously reported similar sensors. This pronounced GMR signal fully validates the employed DLC material, the technology to pattern it and the possibility to develop DLC based gratings as corrosion and wear resistant refractometry sensors that are able to operate under harsh conditions providing great value and versatility.

  6. Near edge X-ray absorption fine structure study for optimization of hard diamond-like carbon film formation with Ar cluster ion beam

    CERN Document Server

    Kitagawa, T; Kanda, K; Shimizugawa, Y; Toyoda, N; Matsui, S; Yamada, I; Tsubakino, H; Matsuo, J

    2003-01-01

    Diamond-like carbon (DLC) film deposited using C sub 6 sub 0 vapor with simultaneous irradiation of an Ar cluster ion beam was characterized by a near edge X-ray absorption fine structure (NEXAFS), in order to optimize the hard DLC film deposition conditions. Contents of sp sup 2 orbitals in the films, which were estimated from NEXAFS spectra, are 30% lower than that of a conventional DLC film deposited by a RF plasma method. Those contents were obtained under the flux ratio of the C sub 6 sub 0 molecules to the Ar cluster ions to range from 1 to 20, at 5keV of Ar cluster ion acceleration energy. Average hardness of the films was 50 GPa under these flux ratios. This hardness was three times higher than that of a conventional DLC film. Furthermore, the lowest sp sup 2 content and above-mentioned high hardness were obtained at room temperature of the substrate when the depositions were performed in the range of the substrate temperature from room temperature to 250degC. (author)

  7. Preparation of Ag-containing diamond-like carbon films on the interior surface of tubes by a combined method of plasma source ion implantation and DC sputtering

    Science.gov (United States)

    Hatada, R.; Flege, S.; Bobrich, A.; Ensinger, W.; Dietz, C.; Baba, K.; Sawase, T.; Watamoto, T.; Matsutani, T.

    2014-08-01

    Adhesive diamond-like carbon (DLC) films can be prepared by plasma source ion implantation (PSII), which is also suitable for the treatment of the inner surface of a tube. Incorporation of a metal into the DLC film provides a possibility to change the characteristics of the DLC film. One source for the metal is DC sputtering. In this study PSII and DC sputtering were combined to prepare DLC films containing low concentrations of Ag on the interior surfaces of stainless steel tubes. A DLC film was deposited using a C2H4 plasma with the help of an auxiliary electrode inside of the tube. This electrode was then used as a target for the DC sputtering. A mixture of the gases Ar and C2H4 was used to sputter the silver. By changing the gas flow ratios and process time, the resulting Ag content of the films could be varied. Sample characterizations were performed by X-ray photoelectron spectroscopy, secondary ion mass spectrometry, atomic force microscopy and Raman spectroscopy. Additionally, a ball-on-disk test was performed to investigate the tribological properties of the films. The antibacterial activity was determined using Staphylococcus aureus bacteria.

  8. Surface treatment of diamond-like carbon films by reactive Ar/CF{sub 4} high-power pulsed magnetron sputtering plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, Takashi, E-mail: t-kimura@nitech.ac.jp [Graduate School of Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Nishimura, Ryotaro [Graduate School of Engineering, Nagoya Institute of Technology, Gokiso-cho, Showa-ku, Nagoya 466-8555 (Japan); Azuma, Kingo [Department of Electrical Engineering and Computer Sciences, University of Hyogo, 2167 Shosha, Himeji, Hyogo 671-2280 (Japan); Nakao, Setsuo; Sonoda, Tsutomu; Kusumori, Takeshi; Ozaki, Kimihiro [National Institute of Advanced Industrial Science and Technology (AIST) - Chubu, 2266-98 Anagahora, Moriyama, Nagoya 463-8560 (Japan)

    2015-12-15

    Surface modification of diamond-like carbon films deposited by a high-power pulsed magnetron sputtering (HPPMS) of Ar was carried out by a HPPMS of Ar/CF{sub 4} mixture, changing a CF{sub 4} fraction from 2.5% to 20%. The hardness of the modified films markedly decreased from about 13 to about 3.5 GPa with increasing CF{sub 4} fraction, whereas the water contact angle of the modified films increased from 68° to 109° owing to the increase in the CF{sub x} content on the film surface. C 1s spectra in X-ray photoelectron spectroscopy indicated that a graphitic structure of modified films was formed at CF{sub 4} fractions less than 5%, above which the modified films possessed a polymer-like structure. Influence of treatment time on the properties of the modified films was also investigated in the range of treatment time from 5 to 30 min. The properties of the modified films did not depend on the treatment time in the range of treatment time longer than 10 min, whereas the water contact angle was not sensitive to the treatment time at any treatment time.

  9. Investigation of the microstructure, mechanical properties and tribological behaviors of Ti-containing diamond-like carbon films fabricated by a hybrid ion beam method

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Wei [Ningbo Key Laboratory of Marine Protection Materials, Division of Surface Engineering, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Future Convergence Technology Division, Korea Institute of Science and Technology, Seoul, 130-650 (Korea, Republic of); Ke, Peiling [Ningbo Key Laboratory of Marine Protection Materials, Division of Surface Engineering, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China); Moon, Myoung-Woon; Lee, Kwang-Ryeol [Future Convergence Technology Division, Korea Institute of Science and Technology, Seoul, 130-650 (Korea, Republic of); Wang, Aiying, E-mail: aywang@nimte.ac.cn [Ningbo Key Laboratory of Marine Protection Materials, Division of Surface Engineering, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201 (China)

    2012-07-31

    Diamond-like carbon (DLC) films with various titanium contents were investigated using a hybrid ion beam system comprising an anode-layer linear ion beam source and a DC magnetron sputtering unit. The film composition and microstructure were characterized carefully by X-ray photoelectron spectroscopy, transmission electron microscopy and Raman spectroscopy, revealing that the doped Ti atoms had high solubility in the DLC films. The maximum solubility was found to lie between about 7 and 13 at.%. When the Ti content was lower than this solubility, the doped Ti atoms dissolved in the DLC matrix and the films exhibited the typical features of the amorphous DLC structure and displayed low compressive stresses, friction coefficients and wear rates. However, as the doped content exceeded the solubility, Ti atoms bonded with C atoms, resulting in the formation of carbide nano-particles embedded in the DLC matrix. Although the emergence of the carbide nano-particles promoted graphitizing due to a catalysis effect, the film hardness was enhanced to a great extent. On the other hand, the hard carbides particles caused abrasive wear behavior, inducing a high friction coefficient and wear rate. - Highlights: Black-Right-Pointing-Pointer Ti doped DLC films (Ti {approx} 24 at.% )were deposited by a hybrid ion beam system. Black-Right-Pointing-Pointer Solubility of the Ti atoms in the DLC films was found around 7 {approx} 13 at .%. Black-Right-Pointing-Pointer Microstructure evolution from DLC to nanocomposite played key role in film behaviors.

  10. Tribological properties and thermal stability of hydrogenated, silicon/nitrogen-coincorporated diamond-like carbon films prepared by plasma-enhanced chemical vapor deposition

    Science.gov (United States)

    Nakazawa, Hideki; Okuno, Saori; Magara, Kohei; Nakamura, Kazuki; Miura, Soushi; Enta, Yoshiharu

    2016-12-01

    We have deposited hydrogenated, silicon/nitrogen-incorporated diamond-like carbon (Si-N-DLC) films by plasma-enhanced chemical vapor deposition using hexamethyldisilazane [((CH3)3Si)2NH; HMDS] as the Si and N source, and compared the tribological performance and thermal stability of the Si-N-DLC films with those of hydrogenated, Si-incorporated DLC (Si-DLC) films prepared using dimethylsilane [SiH2(CH3)2] as the Si source. The deposited films were annealed at 723-873 K in air atmosphere. The friction coefficients of hydrogenated DLC films after annealing significantly increased at the initial stages of friction tests. On the other hand, the friction coefficients of the Si-N-DLC films deposited at an HMDS flow ratio [HMDS/(HMDS+CH4)] of 2.27% remained low after the annealing even at 873 K. We found that the wear rate of the Si-N-DLC film deposited at 2.27% and -1000 V remained almost unchanged after the annealing at 873 K, whereas that of the Si-DLC film with a similar Si fraction deposited at -1000 V significantly increased after the annealing at 773 K.

  11. Depth profiling of fluorine-doped diamond-like carbon (F-DLC) film: Localized fluorine in the top-most thin layer can enhance the non-thrombogenic properties of F-DLC

    Energy Technology Data Exchange (ETDEWEB)

    Hasebe, Terumitsu [Center for Science of Environment, Resources and Energy, Keio University Faculty of Science and Technology, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama, Kanagawa 223-8522 (Japan); Department of Radiology, Tachikawa Hospital, 4-2-22, Nishiki-cho, Tachikawa, Tokyo 190-8531 (Japan)], E-mail: teru_hasebe@hotmail.com; Nagashima, So [Center for Science of Environment, Resources and Energy, Keio University Faculty of Science and Technology, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama, Kanagawa 223-8522 (Japan); Kamijo, Aki [Department of Transfusion Medicine, the University of Tokyo Hospital, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8655 (Japan); Yoshimura, Taichi; Ishimaru, Tetsuya; Yoshimoto, Yukihiro; Yohena, Satoshi; Kodama, Hideyuki; Hotta, Atsushi [Center for Science of Environment, Resources and Energy, Keio University Faculty of Science and Technology, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama, Kanagawa 223-8522 (Japan); Takahashi, Koki [Department of Transfusion Medicine, the University of Tokyo Hospital, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8655 (Japan); Suzuki, Tetsuya [Center for Science of Environment, Resources and Energy, Keio University Faculty of Science and Technology, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama, Kanagawa 223-8522 (Japan)

    2007-12-03

    Fluorine-doped diamond-like carbon (F-DLC) has recently drawn a great deal of attention as a more non-thrombogenic coating than conventional DLC for blood-contacting medical devices. We conducted quantitative depth profiling of F-DLC film by X-ray photoelectron spectroscopy (XPS) in order to elucidate the effects of fluorine and fluorine distribution in F-DLC film in connection with the prevention of surface blood adhesion. F-DLC films were prepared on silicon substrates using the radio frequency plasma enhanced chemical vapor deposition method, and the thickness of films was {approx} 50 nm. 50-nm-thick F-DLC film samples were etched at 10-nm thickness intervals using argon plasma, and each surface was examined by XPS. Thereafter, each etched film layer was incubated with platelet-rich plasma isolated from human whole blood, and the platelet-covered area per unit area was evaluated for each surface. XPS spectra showed the localization of doped fluorine in the top-most thin layer of the film. Platelet-covered areas represented progressively larger portions of the surfaces of deeper etched layers, corresponding to the decreasing fluorine content in such sample surfaces. These results indicate that the localized fluorine in the top-most thin layer is one of the key factors in the promotion of the non-thrombogenicity of F-DLC film.

  12. Surface modification of diamond-like carbon films with protein via polydopamine inspired coatings

    Science.gov (United States)

    Tao, Caihong; Yang, Shengrong; Zhang, Junyan; Wang, Jinqing

    2009-10-01

    In this paper, we report a facile two-step approach to immobilize proteins onto DLC surfaces. The first step was a simple immersion of DLC in a solution of dopamine. Polydopamine was deposited on DLC as a stable anchor to present protein molecules. Then the protein ad-layer was deposited on it. The chemical components of the modified DLC surfaces were characterized by Fourier transform infrared spectra and X-ray photoelectron spectroscopy. The biocompatibility of it was evaluated in vitro by the tetrazolium salt method. And it was indicated that the BSA modified surface had good haemocompatibility properties, and was cytocompatible to PC-12 cells.

  13. Surface modification of diamond-like carbon films with protein via polydopamine inspired coatings

    Energy Technology Data Exchange (ETDEWEB)

    Tao Caihong [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Tianshui Middle Road 18th, Lanzhou 730000 (China); China and Graduate University of Chinese Academy of Sciences, Beijing 100080 (China); Yang Shengrong [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Tianshui Middle Road 18th, Lanzhou 730000 (China); Zhang Junyan, E-mail: zhangjunyan@lzb.ac.cn [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Tianshui Middle Road 18th, Lanzhou 730000 (China); Wang Jinqing [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Tianshui Middle Road 18th, Lanzhou 730000 (China)

    2009-10-15

    In this paper, we report a facile two-step approach to immobilize proteins onto DLC surfaces. The first step was a simple immersion of DLC in a solution of dopamine. Polydopamine was deposited on DLC as a stable anchor to present protein molecules. Then the protein ad-layer was deposited on it. The chemical components of the modified DLC surfaces were characterized by Fourier transform infrared spectra and X-ray photoelectron spectroscopy. The biocompatibility of it was evaluated in vitro by the tetrazolium salt method. And it was indicated that the BSA modified surface had good haemocompatibility properties, and was cytocompatible to PC-12 cells.

  14. Improved tribological performance of PEEK polymers by application of diamond-like carbon coatings

    NARCIS (Netherlands)

    KTomaszewski, P.; Pei, Y. T.; Verkerke, G. J.; De Hosson, J. Th M.

    2014-01-01

    Overall high mechanical strength, an elastic modulus comparable to bone and low cost make polyetheretherketone (PEEK) an interesting biomaterial. However, high friction coefficient (CoF) and wear restrict its orthopaedic use to non-articulating applications. A solution might be offered by diamond-li

  15. Diamond-like carbon (DLC) thin film bioelectrodes: Effect of thermal post-treatments and the use of Ti adhesion layer

    Energy Technology Data Exchange (ETDEWEB)

    Laurila, Tomi, E-mail: tomi.laurila@aalto.fi [Department of Electronics, School of Electrical Engineering, Aalto University, Espoo (Finland); Rautiainen, Antti [Department of Electronics, School of Electrical Engineering, Aalto University, Espoo (Finland); Sintonen, Sakari [Department of Micro- and Nanotechnology, School of Electrical Engineering, Aalto University, Espoo (Finland); Jiang, Hua [Department of Applied Physics, School of Science, Aalto University, Espoo (Finland); Kaivosoja, Emilia [Department of Electronics, School of Electrical Engineering, Aalto University, Espoo (Finland); Helsinki University Central Hospital, Institute of Clinical Medicine (Finland); Koskinen, Jari [Department of Materials Science, School of Chemical Technology, Aalto University, Espoo (Finland)

    2014-01-01

    The effect of thermal post-treatments and the use of Ti adhesion layer on the performance of thin film diamond like carbon bioelectrodes (DLC) have been investigated in this work. The following results were obtained: (i) The microstructure of the DLC layer after the deposition was amorphous and thermal annealing had no marked effect on the structure, (ii) formation of oxygen containing SiO{sub x} and Ti[O,C] layers were detected at the Si/Ti and Ti/DLC interfaces with the help of transmission electron microscope (TEM), (iii) thermal post-treatments increased the polar fraction of the surface energy, (iv) cyclic voltammetry (CV) measurements showed that the DLC films had wide water windows and were stable in contact with dilute sulphuric acid and phosphate buffered saline (PBS) solutions, (v) use of Ti interlayer between Pt(Ir) microwire and DLC layer was crucial for the electrodes to survive the electrochemical measurements without the loss of adhesion of the DLC layer, (vi) DLC electrodes with small exposed Pt areas were an order of magnitude more sensitive towards dopamine than Pt electrodes and (vii) thermal post-treatments did not markedly change the electrochemical behavior of the electrodes despite the significant increase in the polar nature of the surfaces. It can be concluded that thin DLC bioelectrodes are stable under physiological conditions and can detect dopamine in micro molar range, but their sensitivity must be further improved. - Highlights: • Crucial effect of Ti adhesion layer on the performance of DLC bioelectrodes is shown. • Amorphous SiOx and Ti[C,O]x are shown to form at the Si/Ti and Ti/DLC interfaces. • Thermal annealing can be used to oxidize the surface of DLC films. • However, there is no change in the sensitivity of the electrodes towards dopamine. • DLC/Pt composite electrodes have improved sensitivity.

  16. The effects of the diamond-like carbon film on the abrasive resistance of dental bur%类金刚石膜在牙科车针表面的初步应用

    Institute of Scientific and Technical Information of China (English)

    李雅瑾; 韩建民; 张仁国; 葛春玲; 王兵

    2011-01-01

    Objective; To study the effect of the diamond-like carbon film ( DLC) on the abrasive resistance of dental bur. Methods; Unused new diamond burs. Tungsten steel resin grinding heads and low-speed carbon steel ball burs were divided into two groups respectively, those with DLC costing were used in test group, those without coating were used as the controls. For the diamond bur, an experienced dentist used the coating and non-coating diamond burs respectively to grind the extracted tooth under the standard of all-crown reduction. One bur was used to grind five teeth, the effects of the two groups were judged by the dentist subjective feeling. For the Tungsten steel resin grinding head, the time of breaking through the resin block under the same rotation speed and same load were compared for the coating and non-coating heads. For the carbon steel ball bur, the edge of the ball burs was examined under microscope with the magnification of 75 times after the bur prepared type I cavity in three extracted teeth. Results: The coating diamond burs were belter than the non-coating judged by the dentist subjective feeling. The time of breaking through the resin block of the Tungsten steel resin grinding head in coating group was less than that in non-coating group, The wear of low-speed ball bur in coating group was slighter than that in non-coating group. Conclusion: DLC can increase the cutting efficiency, decrease the wear, and extend the working life of the bur, especially for the Tungsten steel grinding head and low-speed carbon steel ball bur.%目的:通过类金刚石镀膜(DLC)的方法提高牙科车针的耐磨性.方法:选择临床常用3种类型新车针,每种车针选择同种型号若干支,一组非镀膜作为对照组,一组镀膜作为试验组.对于金刚砂车针:由1名临床经验丰富的医生,使用镀膜与未镀膜车针,按照全冠牙体预备要求磨除离体牙(同一名正畸患者拔除的同名牙),同一根车针磨除5颗离体牙,记

  17. 含硅类金刚石膜硬度压痕测试的有限元模拟%Finite Element Simulation of Indentation Testing for Hardness of Si-Containing Diamond-Like Carbon Film

    Institute of Scientific and Technical Information of China (English)

    刘璨; 兰惠清

    2012-01-01

    使用Abaqus有限元软件通过加载荷与加载位移两种方法对含硅类金刚石膜进行了压痕测试模拟,得到了不同硅含量类金刚石膜的硬度曲线。结果表明:两种方法的模拟结果较吻合,其中加载位移的方法较稳定,速度较快,含硅类金刚石膜的硬度随着硅含量的增加而减小;模拟结果得到了相关试验的验证。%The simulation for indentation testing of Si-containing diamond-like carbon(Si-DLC) film was carried out by infinite element simulation software Abaqus using loading and displacement methods,and the hardness of the diamond-like carbon film with different silicon contents was obtained.The results show that the two methods fit fairly well,the displacement method was fairly stable and its speed also was fairly quick,and the hardness of Si-DLC film decreased with the increase of the silicon content.The finite element simulation was in agreement with correlative experiments.

  18. Diamond-like Carbon Film and Its Application on Articular Surface of Artificial Joint for Increasing Wear Resistance%类金刚石薄膜在人工关节摩擦配副表面改性的应用

    Institute of Scientific and Technical Information of China (English)

    邓乔元; 张腾飞; 武冰洁; 李仕莎; 冷永祥; 黄楠

    2016-01-01

    关节置换术是目前治疗关节疾病最直接、有效的手段,随着国民经济的增长,人工关节在我国的需求量不断增加。介绍了常见人工关节的类型及特点,以及目前用于提高人工关节摩擦副表面耐磨损性及耐腐蚀性的方法,通过比较发现,类金刚石(DLC)薄膜在提高人工关节耐磨损、耐腐蚀性能方面具有更好的应用前景。阐述了DLC薄膜结构、性能及其制备方法,并结合目前DLC薄膜在人工关节摩擦配副表面改性中应用所面临的主要问题,介绍了目前用于降低DLC薄膜内应力、增加DLC薄膜/基体结合力的方法。最后,针对 DLC 薄膜应用于人工关节摩擦配副表面改性中存在的缝隙腐蚀及结合失效问题,并结合人工关节体内服役环境特点,提出了利用金属离子催化人工关节摩擦配副表面吸附蛋白的变性、分解,形成致密生物薄膜,对DLC薄膜的磨痕和缺陷进行修复的思想,展望了新型DLC薄膜在人工关节表面改性中的应用前景。%Arthroplasty is the most effective method for the treatment of joint disease in clinical practice, and there are in-creasing needs for artificial joints with the development of national economy. There are three types of artificial joints in clinical practice. Lots of methods have been used to enhance the wear and corrosion resistance of artificial joints. Diamond-like carbon (DLC) film has low friction coefficient, high wear resistance and good biocompatibility, which has been used to improve the wear and corrosion resistance of artificial joints. But the clinical use of DLC coated artificial joint is unsatisfying. This paper discussed the reasons for DLC failure in vivo. Metal doping DLC film or multilayer DLC film could lower the internal stress, improve the adhesion and postpone the DLC film failure. Concerning the service environment of artificial joints, the crevice corrosion and adhesion of DLC film

  19. Performance of diamond-like carbon-protected rubber under cyclic friction. I. Influence of substrate viscoelasticity on the depth evolution

    NARCIS (Netherlands)

    Martinez-Martinez, D.; Pal, J.P. van der; Pei, Y.T.; Hosson, J.Th.M. De

    2011-01-01

    In this paper, the influence of the viscoelastic properties of rubber substrate on the tribological behavior of DLC film-coated alkyl acrylate rubber is studied. The mechanical behavior of the rubber was first characterized by creep experiments using spherical indentations. The results were adjusted

  20. Corrosion, friction and wear performance of diamond – like carbon (DLC coatings

    Directory of Open Access Journals (Sweden)

    M. Madej

    2016-10-01

    Full Text Available The a - C:H:W, TiN/a - C:H:W and the CrN/a - C:H:W coatings were deposited on steel surface by physical vapour deposition methods and studied for corrosion and tribological properties, after elemental and structural analysis. In friction pairs the elements coated with diamond-like carbon showed better tribological properties than the elements without coatings. The presence of interlayers in coatings contributed to an improvement in the tribological properties but decreased corrosion resistance.

  1. Regression Analysis of the Effect of Bias Voltage on Nano- and Macrotribological Properties of Diamond-Like Carbon Films Deposited by a Filtered Cathodic Vacuum Arc Ion-Plating Method

    Directory of Open Access Journals (Sweden)

    Shojiro Miyake

    2014-01-01

    Full Text Available Diamond-like carbon (DLC films are deposited by bend filtered cathodic vacuum arc (FCVA technique with DC and pulsed bias voltage. The effects of varying bias voltage on nanoindentation and nanowear properties were evaluated by atomic force microscopy. DLC films deposited with DC bias voltage of −50 V exhibited the greatest hardness at approximately 50 GPa, a low modulus of dissipation, low elastic modulus to nanoindentation hardness ratio, and high nanowear resistance. Nanoindentation hardness was positively correlated with the Raman peak ratio Id/Ig, whereas wear depth was negatively correlated with this ratio. These nanotribological properties highly depend on the films’ nanostructures. The tribological properties of the FCVA-DLC films were also investigated using a ball-on-disk test. The average friction coefficient of DLC films deposited with DC bias voltage was lower than that of DLC films deposited with pulse bias voltage. The friction coefficient calculated from the ball-on-disk test was correlated with the nanoindentation hardness in dry conditions. However, under boundary lubrication conditions, the friction coefficient and specific wear rate had little correlation with nanoindentation hardness, and wear behavior seemed to be influenced by other factors such as adhesion strength between the film and substrate.

  2. P掺杂类金刚石薄膜的制备及生物学行为研究%Phosphorus doped diamond-like carbon films fabricated by plasma immersion ion implantation - deposition and study of biological behavior

    Institute of Scientific and Technical Information of China (English)

    王进; 杨萍; 陈俊英; 冷永祥; 万国江; 孙鸿; 赵安莎; 黄楠

    2004-01-01

    应用等离子体浸没离子注入与沉积方法合成了磷掺杂的类金刚石(diamond like carbon,DLC)薄膜.结构分析表明磷以微米级岛状结构分散于DLC薄膜表层,P的掺杂增加了DLC薄膜的无序性,俄歇能谱表明岛型区域是由P、C、O三种元素形成的化合物.掺杂表面表现出强烈的亲水性(水接触角为16.9°),体外血小板粘附实验结果显示,P掺杂DLC薄膜表面粘附的血小板少且变形小,表现出的血液相容性优于热解碳和未改性DLC.

  3. The Role of Ambient Gas and Pressure on the Structuring of Hard Diamond-Like Carbon Films Synthesized by Pulsed Laser Deposition

    Directory of Open Access Journals (Sweden)

    Andrei C. Popescu

    2015-06-01

    Full Text Available Hard carbon thin films were synthesized on Si (100 and quartz substrates by the Pulsed Laser Deposition (PLD technique in vacuum or methane ambient to study their suitability for applications requiring high mechanical resistance. The deposited films’ surface morphology was investigated by scanning electron microscopy, crystalline status by X-ray diffraction, packing and density by X-ray reflectivity, chemical bonding by Raman and X-ray photoelectron spectroscopy, adherence by “pull-out” measurements and mechanical properties by nanoindentation tests. Films synthesized in vacuum were a-C DLC type, while films synthesized in methane were categorized as a-C:H. The majority of PLD films consisted of two layers: one low density layer towards the surface and a higher density layer in contact with the substrate. The deposition gas pressure played a crucial role on films thickness, component layers thickness ratio, structure and mechanical properties. The films were smooth, amorphous and composed of a mixture of sp3-sp2 carbon, with sp3 content ranging between 50% and 90%. The thickness and density of the two constituent layers of a film directly determined its mechanical properties.

  4. Diamond and diamond-like films for transportation applications

    Energy Technology Data Exchange (ETDEWEB)

    Perez, J.M.

    1993-01-01

    This section is a compilation of transparency templates which describe the goals of the Office of Transportation Materials (OTM) Tribology Program. The positions of personnel on the OTM are listed. The role and mission of the OTM is reviewed. The purpose of the Tribology Program is stated to be `to obtain industry input on program(s) in tribology/advanced lubricants areas of interest`. The objective addressed here is to identify opportunities for cost effective application of diamond and diamond-like carbon in transportation systems.

  5. Microstructure and property of diamond-like carbon films with Al and Cr co-doping deposited using a hybrid beams system

    Science.gov (United States)

    Dai, Wei; Liu, Jingmao; Geng, Dongsen; Guo, Peng; Zheng, Jun; Wang, Qimin

    2016-12-01

    DLC films with weak carbide former Al and carbide former Cr co-doping (Al:Cr-DLC) were deposited by a hybrid beams system comprising an anode-layer linear ion beam source (LIS) and high power impulse magnetron sputtering using a gas mixture of C2H2 and Ar as the precursor. The doped Al and Cr contents were controlled via adjusting the C2H2 fraction in the gas mixture. The composition, microstructure, compressive stress, mechanical properties and tribological behaviors of the Al:Cr-DLC films were researched carefully using X-ray photoelectron spectroscopy, transmission electron microscopy, Raman spectroscopy, stress-tester, nanoindentation and ball-on-plate tribometer as function of the C2H2 fraction. The results show that the Al and Cr contents in the films increased continuously as the C2H2 fraction decreased. The doped Cr atoms preferred to bond with the carbon while the Al atoms mainly existed in metallic state. Structure modulation with alternate multilayer consisted of Al-poor DLC layer and Al-rich DLC layer was found in the films. Those periodic Al-rich DLC layers can effectively release the residual stress of the films. On the other hand, the formation of the carbide component due to Cr incorporation can help to increase the film hardness. Accordingly, the residual stress of the DLC films can be reduced without sacrificing the film hardness though co-doping Al and Cr atoms. Furthermore, it was found that the periodic Al-rich layer can greatly improve the elastic resilience of the DLC films and thus decreases the film friction coefficient and wear rate significantly. However, the existence of the carbide component would cause abrasive wear and thus deteriorate the wear performance of the films.

  6. Synthesis and characterization of carbon-coated cobalt ferrite nanoparticles

    Science.gov (United States)

    Bakhshi, Hamed; Shokuhfar, Ali; Vahdati, Nima

    2016-09-01

    Cobalt ferrite nanoparticles (CFNPs) were prepared via a reverse micelle method. The CFNPs were subsequently coated with carbon shells by means of thermal chemical vapor deposition (TCVD). In this process, acetylene gas (C2H2) was used as a carbon source and the coating was carried out for 1, 2, or 3 h at 750°C. The Ar/C2H2 ratio was 10:1. Heating during the TCVD process resulted in a NP core size that approached 30 nm; the thickness of the shell was less than 10 nm. The composition, structure, and morphology of the fabricated composites were characterized using X-ray diffraction, simultaneous thermal analysis, transmission electron microscopy, high-resolution transmission electron microscopy, and selected-area diffraction. A vibrating sample magnetometer was used to survey the samples' magnetic properties. The deposited carbon shell substantially affected the growth and magnetic properties of the CFNPs. Micro-Raman spectroscopy was used to study the carbon coating and revealed that the deposited carbon comprised graphite, multiwalled carbon nanotubes, and diamond- like carbon. With an increase in coating time, the intensity ratio between the amorphous and ordered peaks in the Raman spectra decreased, which indicated an increase in crystallite size.

  7. Electron Injection Enhancement by Diamond-Like Carbon Film in Polymer Electroluminescence Devices%聚合物电致发光器件中用类金刚石碳膜增强电子注入

    Institute of Scientific and Technical Information of China (English)

    李宏建; 闫玲玲; 黄伯云; 易丹青; 胡锦; 何英旋; 彭景翠

    2006-01-01

    A diamond-like carbon (DLC) film is deposited as an electron injection layer between the polymer light-emitting layer (MEH-PPV) and aluminum (Al) cathode electrode in polymer electroluminescence devices (PLEDs) using a radio frequency plasma deposition system. The source material of the DLC is n-butylamine. The devices consist of indium tin oxide (ITO)/MEH-PPV/DLC/Al. Electron injection properties are investigated through I-V characteristics, and the mechanism of electron injection enhancement due to a thin DLC layer has been studied. It is found that: (1) a DLC layer thinner than 1. 0nm leads to a higher turn-on voltage and decreased electroluminescent (EL) efficiency; (2) a 5.0nm DLC layer significantly enhances the electron injection and re sults in the lowest turn-on voltage and the highest EL efficiency; (3) DLC layer that exceeds 5.0nm results in poor device performance; and(4) EL emission can hardly be detected when the layer exceeds 10.0nm. The properties ofITO/MEH-PPV/DLC/Al and ITO/MEH-PPV/LiF/Al are investigated comparatively.%用正丁胺作碳源,采用射频辉光等离子系统制备类金刚石碳膜(DLC),沉积在聚合物发光器件中的发光层(MEH-PPV)和铝(Al)阴极间作电子注入层.制备了结构为ITO/MEH-PPV/DLC/Al的不同DLC厚度的器件,测量了器件的I-V特性、亮度及效率,研究了DLC层对器件电子注入性能影响的机制.结果表明:当DLC厚度小于1.0nm时,其器件有较ITO/MEH-PPV/Al高的启动电压和低的发光效率;当DLC厚度在1.0~5.0nm之间时,器件的性能随着DLC厚度增加而变好;当DLC厚度为5.0nm时,器件具有最低的启动电压与最高的发光效率;当DLC厚度继续增加时,器件的性能随着DLC厚度增加而变差.并对ITO/MEH-PPV/DLC/Al和ITO/MEH-PPV/LiF/Al的器件性能进行了比较研究.

  8. “m=1” coatings

    DEFF Research Database (Denmark)

    Cooper-Jensen, C.; Klinkby, Esben Bryndt; Beaucour, J.

    chemical hazard after manufacture is Be dust if the sample is destroyed. We have a sample of 276 nm Be coated on a Si wafer for these tests. Diamond Like Carbon (DLC) coatings with 99% sp3 bindings (meaning it is very close to diamond) are made commercially using CVD techniques. In the coating...

  9. LARGE AREA FILTERED ARC DEPOSITION OF CARBON AND BORON BASED HARD COATINGS

    Energy Technology Data Exchange (ETDEWEB)

    Bhattacharya, Rabi S.

    2003-12-05

    This document is a final report covering work performed under Contract No. DE-FG02-99ER82911 from the Department of Energy under a SBIR Phase II Program. Wear resistant, hard coatings can play a vital role in many engineering applications. The primary goal of this project was to develop coatings containing boron and carbon with hardness greater than 30 GPa and evaluate these coatings for machining applications. UES has developed a number of carbon and boron containing coatings with hardness in the range of 34 to 65 GPa using a combination of filtered cathodic arc and magnetron sputtering. The boron containing coatings were based on TiB2, TiBN, and TiBCN, while the carbon containing coatings ere TiC+C and hydrogen free diamond-like-carbon. Machining tests were performed with single and multilayer coated tools. The turning and milling tests were run at TechSolve Inc., under a subcontract at Ohio State University. Significant increases in tool lives were realized in end milling of H-13 die steel (8X) and titanium alloy (80%) using the TiBN coating. A multilayer TiBN/TiN performed the best in end-milling of highly abrasive Al-Si alloys. A 40% increase in life over the TiAlN benchmark coating was found. Further evaluations of these coatings with commercialization partners are currently in progress.

  10. Thermoplastic coating of carbon fibers

    Science.gov (United States)

    Edie, D. D.; Lickfield, G. C.; Drews, M. J.; Ellison, M. S.; Gantt, B. W.

    1989-01-01

    A process is being developed which evenly coats individual carbon fibers with thermoplastic polymers. In this novel, continuous coating process, the fiber tow bundle is first spread cover a series of convex rollers and then evenly coated with a fine powder of thermoplastic matrix polymer. Next, the fiber is heated internally by passing direct current through the powder coated fiber. The direct current is controlled to allow the carbon fiber temperature to slightly exceed the flow temperature of the matrix polymer. Analysis of the thermoplastic coated carbon fiber tows produced using this continuous process indicates that 30 to 70 vol pct fiber prepregs can be obtained.

  11. Thermoplastic coating of carbon fibers

    Science.gov (United States)

    Edie, D. D.; Lickfield, G. C.; Drews, M. J.; Ellison, M. S.; Gantt, B. W.

    1989-01-01

    A process is being developed which evenly coats individual carbon fibers with thermoplastic polymers. In this novel, continuous coating process, the fiber tow bundle is first spread cover a series of convex rollers and then evenly coated with a fine powder of thermoplastic matrix polymer. Next, the fiber is heated internally by passing direct current through the powder coated fiber. The direct current is controlled to allow the carbon fiber temperature to slightly exceed the flow temperature of the matrix polymer. Analysis of the thermoplastic coated carbon fiber tows produced using this continuous process indicates that 30 to 70 vol pct fiber prepregs can be obtained.

  12. Fatigue resistant carbon coatings for rolling/sliding contacts

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Harpal; Ramirez, Giovanni; Eryilmaz, Osman; Greco, Aaron; Doll, Gary; Erdemir, Ali

    2016-06-01

    The growing demands for renewable energy production have recently resulted in a significant increase in wind plant installation. Field data from these plants show that wind turbines suffer from costly repair, maintenance and high failure rates. Often times the reliability issues are linked with tribological components used in wind turbine drivetrains. The primary failure modes in bearings and gears are associated with micropitting, wear, brinelling, scuffing, smearing and macropitting all of which occur at or near the surface. Accordingly, a variety of surface engineering approaches are currently being considered to alter the near surface properties of such bearings and gears to prevent these tribological failures. In the present work, we have evaluated the tribological performance of compliant highly hydrogenated diamond like carbon coating developed at Argonne National Laboratory, under mixed rolling/sliding contact conditions for wind turbine drivetrain components. The coating was deposited on AISI 52100 steel specimens using a magnetron sputter deposition system. The experiments were performed on a PCS Micro-Pitting-Rig (MPR) with four material pairs at 1.79 GPa contact stress, 40% slide to roll ratio and in polyalphaolefin (PAO4) basestock oil (to ensure extreme boundary conditions). The post-test analysis was performed using optical microscopy, surface profilometry, and Raman spectroscopy. The results obtained show a potential for these coatings in sliding/rolling contact applications as no failures were observed with coated specimens even after 100 million cycles compared to uncoated pair in which they failed after 32 million cycles, under the given test conditions.

  13. The Study of DLC and Si-DLC Based Coatings and Their Mechanical Properties

    Directory of Open Access Journals (Sweden)

    Z. Budinská

    2013-04-01

    Full Text Available In this paper, diamond-like carbon (DLC films and DLC-Si films were studied. These films were deposited by DC-plasma-assisted chemical vapour deposition (PACVD. X-ray diffraction analysis of coatings was used for a determination of coatings structure. In particular, the effect of the crystal structure of the coatings on their mechanical properties was studied.

  14. The Influence of Chemical Alloying on the High Temperature Wear Resistance of H-Free DLC Coatings

    NARCIS (Netherlands)

    Galvan, D.; Pei, Y.T.; Hosson, J.T.M. De; Cavaleiro, A.; Chandra, T; Tsuzaki, K; Militzer, M; Ravindran, C

    2007-01-01

    A commercial RF-sputtering deposition rig was employed to deposit H-free diamond-like carbon (DLC) coatings. The influence of alloying elements such as Ti and Si on the structure, mechanical and tribological properties of the coatings was investigated. The coating was observed in cross section and i

  15. Coating Carbon Fibers With Platinum

    Science.gov (United States)

    Effinger, Michael R.; Duncan, Peter; Coupland, Duncan; Rigali, Mark J.

    2007-01-01

    A process for coating carbon fibers with platinum has been developed. The process may also be adaptable to coating carbon fibers with other noble and refractory metals, including rhenium and iridium. The coated carbon fibers would be used as ingredients of matrix/fiber composite materials that would resist oxidation at high temperatures. The metal coats would contribute to oxidation resistance by keeping atmospheric oxygen away from fibers when cracks form in the matrices. Other processes that have been used to coat carbon fibers with metals have significant disadvantages: Metal-vapor deposition processes yield coats that are nonuniform along both the lengths and the circumferences of the fibers. The electrical resistivities of carbon fibers are too high to be compatible with electrolytic processes. Metal/organic vapor deposition entails the use of expensive starting materials, it may be necessary to use a furnace, and the starting materials and/or materials generated in the process may be hazardous. The present process does not have these disadvantages. It yields uniform, nonporous coats and is relatively inexpensive. The process can be summarized as one of pretreatment followed by electroless deposition. The process consists of the following steps: The surfaces of the fiber are activated by deposition of palladium crystallites from a solution. The surface-activated fibers are immersed in a solution that contains platinum. A reducing agent is used to supply electrons to effect a chemical reduction in situ. The chemical reduction displaces the platinum from the solution. The displaced platinum becomes deposited on the fibers. Each platinum atom that has been deposited acts as a catalytic site for the deposition of another platinum atom. Hence, the deposition process can also be characterized as autocatalytic. The thickness of the deposited metal can be tailored via the duration of immersion and the chemical activity of the solution.

  16. Magnetron reactively sputtered Ti-DLC coatings on HNBR rubber : The influence of substrate bias

    NARCIS (Netherlands)

    Bui, X.L.; Pei, Y.T.; Hosson, J.Th.M. De

    2008-01-01

    In this study, Ti-containing diamond-like carbon (Ti-DLC) coatings have been deposited on HNBR (hydrogenated nitrile butadiene) rubber and also on Si wafer as reference via unbalanced magnetroli reactive sputtering from a Ti target in C2H2/Ar plasma. The deposition rates of coatings on rubber and Si

  17. On the composition analysis of nc-TiC/a-C : H nanocomposite coatings

    NARCIS (Netherlands)

    Chechenin, N.G.; Chernykh, P.N.; Kulikauskas, V.S.; Pei, Y.T.; Vainshtein, D.; Hosson, J.Th.M. De

    2008-01-01

    Using a set of ion beam analysis (IBA) techniques the compositions of hydrogenated diamond-like carbon (DLC) nanocomposite coatings are scrutinized, including the hydrogen content. The coatings are composed of two constituents: amorphous hydrocarbon matrix (a-C : H) and nanocrystalline titanium carb

  18. 等离子体刻蚀并沉积类金刚石膜制备超疏水木材%Fabrication of superhydrophobic wood by plasma etching and deposition of diamond-like carbon films

    Institute of Scientific and Technical Information of China (English)

    解林坤; 王洪艳; 代沁伶; 杜官本

    2016-01-01

    This study presents the fabrication of superhydrophobic wood of Acer saccharum Marsh. using a combination of O2 plasma etching and plasma deposition of a thin hydrophilic diamond⁃like carbon ( DLC) coating in order to impart wood with controlled wetting properties. The effect of O2 plasma etching on roughness was investigated using the scanning electron microscopy ( SEM) and laser scanning confocal microscope ( LSCM) profilometry. The wetting behavior was de⁃termined by the static water contact angle measurement. Furthermore, the morphology, thickness of deposited films, ele⁃ment composition and their chemical bonding information of the wood surfaces before and after the treatment were also examined with SEM, the ellipsometer and X-ray photoelectron spectroscopy ( XPS) . The results showed that the wood surfaces of the average roughness, root mean square roughness and peak⁃to⁃valley roughness increased with longer etching time within 30 min. However, the wood surface roughness decreased slightly after the prolonged etching time of 45 min. The static water contact angles of the wood surface increased firstly and then decreased with the increase of etch⁃ing time and attained a maximum value for 157�2° with 30 min etching and after depositing DLC film for 1�5 min, but the static water contact angle of the wood surface etched for 45 min and after depositing DLC film for the same time was 152�3° . The static water contact angles decreased gradually with an increase in deposition times if the wood surfaces were subjected to the same time etching. From the data of the deposition thickness, the deposition rate of DLC films was calculated, which was constant (51�7±4�5) nm/min over the deposition times investigated. The content of oxygen ele⁃ment reduced obviously and the diamond⁃like characteristic peaks of sp2-C and sp3-C presented after the wood surfaces deposited with the DLC film coating.%为使木材表面具备疏水性能,采用等离

  19. Bacterial adherence on fluorinated carbon based coatings deposited on polyethylene surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Terriza, A; Del Prado, G; Perez, A Ortiz; Martinez, M J; Puertolas, J A; Manso, D Molina; Gonzalez-Elipe, A R; Yubero, F; Barrena, E Gomez; Esteban, J, E-mail: antonia.terriza@icmse.csic.es

    2010-11-01

    Development of intrinsically antibacterial surfaces is of key importance in the context of prostheses used in orthopaedic surgery. In this work we present a thorough study of several plasma based coatings that may be used with this functionality: diamond like carbon (DLC), fluorine doped DLC (F-DLC) and a high fluorine content carbon-fluor polymer (CF{sub X}). The study correlates the surface chemistry and hydrophobicity of the coating surfaces with their antibacterial performance. The coatings were deposited by RF-plasma assisted deposition at room temperature on ultra high molecular weight polyethylene (UHMWPE) samples. Fluorine content and relative amount of C-C and C-F bond types was monitored by X-ray photoelectron spectroscopy and hydrophobicity by water contact angle measurements. Adherence of Staphylococcus aureus and Staphylococcus epidermidis to non-coated and coated UHMWPE samples was evaluated. Comparisons of the adherence performance were evaluated using a paired t test (two materials) and a Kruskall Wallis test (all the materials). S. aureus was statistically significant (p< 0.001) less adherent to DLC and F-DLC surfaces than S. epidermidis. Both bacteria showed reduction of adherence on DLC/UHMWPE. For S. aureus, reduction of bacterial adherence on F-DLC/UHMWPE was statistically significant respect to all other materials.

  20. Influence of energetic ion bombardment on W-C : H coatings deposited with W and WC targets

    NARCIS (Netherlands)

    Strondl, C; Carvalho, NM; De Hosson, JTM; Krug, TG

    2005-01-01

    Tungsten containing diamond-like carbon (W-C:H) coatings have been produced by unbalanced magnetron sputtering using two different target materials. In the first series of coatings, W has been used as target material, and in the second series, WC has been used as target material. In both series of W

  1. Tribological behavior of W-DLC coated rubber seals

    NARCIS (Netherlands)

    Pei, Y.T.; Bui, X.L.; Zhou, X.B.; Hosson, J.Th.M. De

    2008-01-01

    Tungsten-containing diamond-like carbon (W-DLC) coatings have been deposited on FKM (fluorocarbon) and HNBR (hydrogenated nitrile butadiene) rubbers via unbalanced magnetron reactive sputtering from a WC target in a C2H2/Ar plasma. The surface morphology and fracture cross sections of uncoated and c

  2. Long-term stable surface modification of DLC coatings

    Directory of Open Access Journals (Sweden)

    Gotzmann Gaby

    2017-09-01

    Full Text Available The use of coatings based on diamond like carbon (DLC for medical applications was established during the last years. Main advantages of these coatings are its high hardness, good wear and friction behavior and its biocompatibility. Using low-energy electron-beam treatment, we addressed the surface modification of DLC coatings. The aim was to generate new biofunctional surface characteristics that are long-term stable.

  3. Kinetics of diamond-like film growth using filament-assisted chemical vapor deposition

    Energy Technology Data Exchange (ETDEWEB)

    Gorsuch, G.; Jin, Y.; Ingle, N.K.; Mountziaris, T.J.; Yu, W.Y.; Petrou, A. [State Univ. of New York, Buffalo, NY (United States)

    1995-08-01

    A detailed kinetic model of diamond-like film growth from methane diluted in hydrogen using low-pressure, filament-assisted chemical vapor deposition (FACVD) has been developed. The model includes both gas-phase and surface reactions. The surface kinetics include adsorption of CH{sub 3}{center_dot} and H{center_dot}, abstraction reactions by gas phase radicals, desorption, and two pathways for diamond (sp{sup 3}) and graphitic carbon (sp{sup 2}) growth. It is postulated that adsorbed CH{sub 2}{center_dot} species are the major film precursors. The proposed kinetic model was incorporated into a transport model describing flow, heat and mass transfer in stagnation flow FACVD reactors. Diamond-like films were deposited on preceded Si substrates in such a reactor as a pressure of 26 Torr, inlet gas composition ranging from 0.5% to 1.5% methane in hydrogen and substrate temperatures ranging from 600 to 950 C. The best films were obtained at low methane concentrations and substrate temperature of 700 C. The films were characterized using Scanning Electron Microscopy (SEM) and Raman spectroscopy. Observations from their experiments and growth rates, compositions and stable species distributions in the gas phase. It is the first complete model of FACVD that includes gas-phase and surface kinetics coupled with transport phenomena.

  4. Hemocompatibility of DLC coatings synthesized by ion beam assisted deposition

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Ion beam-assisted diamond-like carbon (DLC) coatings have beenused for growing the human platelet, fibrinogen, and albumin in the control environment in order to assess their hemocompatibility. The hard carbon films were prepared on polymethylmethacrylate (PMMA) at room temperature using ion beam assisted deposition (IBAD). Raman spectroscopic analysis proved that the carbon films on PMMA are diamond-like with a higher fraction of sp\\+3 bonds in the structure of mixed sp\\+2+sp\\+3 bonding. The blood protein adsorption tests showed that DLC coatings can adsorb more albumin and are slightly more fibrinogen than the PMMA chosen as a control sample. The platelets adhered on DLC coatings were reduced significantly in number. These results indicate good hemocompatibility of DLC coatings.

  5. Electrochemical Corrosion Behavior of the DLC Coated and Uncoated NiTi Alloys

    Institute of Scientific and Technical Information of China (English)

    Jiehe SUI; Wei CAI; Liancheng ZHAO

    2006-01-01

    A dense and well-adhered diamond-like carbon(DLC)coating was prepared on the nickel-titanium(NiTi)alloys by plasma immersion ion implantation and deposition(PⅢD). Potentiodynamic polarization tests indicated the corrosion resistance of the NiTi alloys was markedly improved by the DLC coating. The Ni ions release of the NiTi alloys was effectively blocked by the DLC coating.

  6. UV Raman and XPS studies of hydrogenous diamond-like carbon films prepared by PECVD%等离子体增强化学气相沉积法制备含氢类金刚石膜的紫外Raman光谱和X射线光电子能谱研究

    Institute of Scientific and Technical Information of China (English)

    杨发展; 沈丽如; 王世庆; 唐德礼; 金凡亚; 刘海峰

    2013-01-01

    利用脉冲辉光放电的方法,在硅片上采用不同的沉积工艺制备了含氢类金刚石膜层,并采用Raman光谱和X射线光电子能谱(XPS)对膜层进行表征.用Raman光谱仪在波长为325 nm的紫外光源的激励下观察膜层的键结构.紫外Raman光谱对含氢类金刚石膜是非常有用的,它能有效避免可见光Raman光谱测量时的荧光干扰,清晰地得到膜层的D峰和G峰.同时利用XPS分析得到膜层的sp3键含量,并与Raman光谱所得数据进行比较.通过Raman光谱和XPS分析可以发现,在紫外光源的激励下,膜层的G峰峰位向高频移方向移动,G峰峰位、I(D)/I(G),G峰半高宽和sp3键含量之间存在一定的关系.%The hydrogenous diamond-like carbon (DLC) films deposited on Si substrates using pulsed glow discharge method are investigated using Raman spectroscopy and X-ray photoelectron spectroscopy method. The UV Raman spectrum for excitation wavelength is 325 nm. UV Raman is particularly useful for hydrogenous DLC, as it gives clear measurements in the D and G peak spectral region even for highly hydrogenated samples, for which the visible Raman spectra are overshadowed by photoluminescence. The sp3 bonding of hydrogenous DLC film can be effectively studied by X-ray photoelectron spectroscopy method, and the data from the X-ray photo-electron spectroscopy method are compared with Raman results. It is found that G peak shows a shift to ward a higher wave under UV excitation. For the G peak, I(D)/I(G), G-FWHM and sp3, there exists a relationship among them.

  7. Use of coated silicon field emitters as neutralisers for fundamental physics missions in space

    CERN Document Server

    Aplin, K L; Collingwood, C M; Wang, L; Stevens, R; Huq, S E; Malik, A

    2005-01-01

    Spacecraft neutralisers are required as part of the ion propulsion system for accurate station keeping in fundamental physics missions. A silicon field emitter neutraliser is under development at the Rutherford Appleton Laboratory. Thin layers of insulating materials as coatings for the gated field emitter array structure are described, which are postulated to reduce power consumption and reduce overheating. The power consumption and lifetime of aluminium nitrude and amorphous hydrogen diamond-like carbon coatings were promising, performing better in endurance tests than uncoated samples, but further work is required to characterise the coating's physical properties and its effects on field emission. The thermal conductivity of the coating material appeared to have little effect on the sample lifetimes. Aluminium nitride had reduced power consumption compared to diamond-like carbon coated and uncoated samples. A thin (~5nm)layer was optimal, meeting European Space Agency specifications for the neutraliser eng...

  8. Tribological Performance of Hydrogenated Amorphous Carbon (a-C: H DLC Coating when Lubricated with Biodegradable Vegetal Canola Oil

    Directory of Open Access Journals (Sweden)

    H.M. Mobarak

    2014-06-01

    Full Text Available Increasing environmental awareness and demands for lowering energy consumptions are strong driving forces behind the development of the vehicles of tomorrow. Without the advances of lubricant chemistry and adequate lubricant formulation, expansion of modern engines would not have been possible. Considering environmental awareness factors as compared to mineral oils, vegetal oil based biolubricants are renewable, biodegradable, non-toxic and have a least amount of greenhouse gases. Furthermore, improvement in engine performance and transmission components, which were impossible to achieve by applying only lubricants design, is now possible through diamond like carbon (DLC coatings. DLC coatings exhibit brilliant tribological properties, such as good wear resistance and low friction. In this regard, tribological performance of a-C: H DLC coating when lubricated with Canola vegetal oil has been investigated by the help of a ball-on-flat geometry. Experimental results demonstrated that the a-C: H DLC coating exhibited better performance with Canola oil in terms of friction and wear as compared to the uncoated materials. Large amount of polar components in the Canola oil significantly improved the tribological properties of the a-C:H coating. Thus, usage of a-C: H DLC coating with Canola oil in the long run may have a positive impact on engine life.

  9. Development of improved coating for advanced carbon-carbon components

    Science.gov (United States)

    Yamaki, Y. R.; Brown, J. J.

    1984-01-01

    Reaction sintered silicon nitride (RSSN) was studied as a substitute coating material on the carbon-carbon material (RCC) presently used as a heat shield on the space shuttle, and on advanced carbon-carbon (ACC), a later development. On RCC, RSSN showed potential in a 538 C (1000 F) screening test in which silicon carbide coated material exhibits its highest oxidation rate; RSSN afforded less protection to ACC because of a larger thermal expansion mismatch. Organosilicon densification and metallic silicon sealing methods were studied as means of further increasing the oxidation resistance of the coating, and some improvement was noted when these methods were employed.

  10. Properties of amorphous carbon

    CERN Document Server

    2003-01-01

    Amorphous carbon has a wide range of properties that are primarily controlled by the different bond hydridisations possible in such materials. This allows for the growth of an extensive range of thin films that can be tailored for specific applications. Films can range from those with high transparency and are hard diamond-like, through to those which are opaque, soft and graphitic-like. Films with a high degree of sp3 bonding giving the diamond-like properties are used widely by industry for hard coatings. Application areas including field emission cathodes, MEMS, electronic devices, medical and optical coatings are now close to market. Experts in amorphous carbon have been drawn together to produce this comprehensive commentary on the current state and future prospects of this highly functional material.

  11. Apparatus for producing carbon-coated nanoparticles and carbon nanospheres

    Energy Technology Data Exchange (ETDEWEB)

    Perry, W. Lee; Weigle, John C.; Phillips, Jonathan

    2015-10-20

    An apparatus for producing carbon-coated nano- or micron-scale particles comprising a container for entraining particles in an aerosol gas, providing an inlet for carbon-containing gas, providing an inlet for plasma gas, a proximate torch for mixing the aerosol gas, the carbon-containing gas, and the plasma gas, bombarding the mixed gases with microwaves, and providing a collection device for gathering the resulting carbon-coated nano- or micron-scale particles. Also disclosed is a method and apparatus for making hollow carbon nano- or micro-scale spheres.

  12. Diamond-like Carbon Thin Films Deposited on Ti6Al4V Alloy Surface by Plasma Gun at Atmospheric Pressure%钛合金表面大气压等离子体枪制备类金刚石薄膜

    Institute of Scientific and Technical Information of China (English)

    陈飞; 周海; 张跃飞; 吕反修

    2012-01-01

    在大气下,采用大气压介质阻挡放电(DBD)等离子体枪在低温下<350℃),以甲烷为单体,氩气为工作气体,在Ti6Al4V钛合金表面制备一层类金刚石薄膜(DLC),以期改善钛合金表面摩擦学性能.利用激光拉曼(Raman)光谱和X射线光电子能谱(XPS)分析了所制备DLC薄膜的结构;利用扫描电子显微镜(SEM)观察DLC薄膜的表面形貌;利用划痕仪测量了DLC薄膜与基体的结合力;利用球-盘摩擦磨损实验仪对DLC薄膜的耐磨性能进行了研究.结果表明:在本实验工艺条件下沉积的类金刚石薄膜厚度约为1.0 μm,薄膜均匀且致密,表面粗糙度Ra为13.23 nm.类金刚石薄膜与基体结合力的临界载荷达到31.0N.DLC薄膜具有优良的减摩性,Ti6Al4V表面沉积DLC薄膜后摩擦系数为0.15,较Ti6Al4V基体的摩擦系数0.50明显减小,耐磨性能得到提高.%At atmospheric pressure, diamond-like carbon (DLC) thin films were deposited on the T16A14V alloy surface by a DBD plasma gun at low temperature (<350℃), with CH4 as a precursor and Ar as dilution gas. The structure of the DLC thin film was analyzed by Laser Raman spectroscope and X-ray photoelectron spectroscopy. The surface morphology was observed through scanning electron microscopy. The adhesion between the DLC thin film and the substrate was investigated with the scribe testing. The friction and wear behavior of the DLC thin films under dry sliding against GCrlS steel was evaluated on a ball-on-disc test rig. The results show that it is feasible to prepare a DLC thin film of 1.0 um thickness by a plasma gun. The film is uniform and dense and the surface roughness R. Is about 13.23 nm. The critical load of adhesion force between the DLC thin film and the substrate is 31.0 N. It has been found that the DLC thin film has excellent friction- and wear-resistant behavior. The friction coefficient of the Ti6A14V substrate is about 0.50 under dry sliding against steel, while the DLC thin

  13. Effects of pretreatment and post-annealing on the field emission property of diamond-like carbon grown on a titanium/silicon substrate%利用前后处理技术改进钛/硅基板上的类金刚石场发射特性

    Institute of Scientific and Technical Information of China (English)

    黄柏仁; 叶忠信; 李世鸿; 汪岛军; 陈昆歧

    2008-01-01

    采用微波等离子体化学气相沉积系统存钛/硅基板上沉积类金刚石薄膜,并利用拉曼光谱仪、扫瞄式电子显微镜及原子力显微镜研究了氢等离子体前处理及快速退火后处理对类金刚石薄膜场发射特性之影响.在沉积类金刚石薄膜之前,钛/硅基板使用了两种前处理技术:第一种为研磨金刚石粉末,第二种为研磨金刚石粉末后外加氢等离子体刻蚀处理.成长类金刚石薄膜后进行快速退火处理.发现不论是氢等离子体前处理还是快速退火后处理皆能改善场发射特性,其中经退火后处理的场发射特性比氢等离子体前处理的场发射特性改善更明显.其因之一在于快速退火后处理可在类金刚石薄膜表而形成sp2丛聚,提供了很多的场发射子,也同时增加了表面粗糙度;另一个原因可能是在快速退火后处理期间会使类金刚石薄膜进一步石墨化,因而提供了许多电子在通过类金刚石薄膜时的传输路径.研究结果表明:利用适当的前后处理技术可改进类金刚石薄膜的场发射特性,进而做为冷阴极材料之应用.%Diamond-like carbon (DLC) films were deposited on titanium/silicon substrates with the help of the micro-wave plasma chemical vapor deposition (CVD) method with At, H2, and CH4 as a mixed gas source. Titanium/silicon substrates were polished by diamond powder and etched by hydrogen ( H2 ) plasma, prior to deposition. After deposi-tion, rapid thermal annealing (RTA) was used as a post-treatment. The effects of hydrogen plasma pretreatment and RTA post-treatment on the electron field emission characteristics of the DLC films was examined and correlated by Ra-man scattering, average surface roughness, and surface morphology. It is found that both treatments can improve the field emission characteristics of DLC films. However, RTA post-treatment demonstrates a more pronounced effect on the enhancement of field emission than does the

  14. 组织工程化类金刚石膜复合材料与人血管内皮细胞的相容性研究%Biocompatibility between tissue-engineering diamond-like carbon film and human vascular endothelial cells

    Institute of Scientific and Technical Information of China (English)

    程光存; 严中亚; 罗乐; 方晓东; 沙自明

    2009-01-01

    OBJECTIVE: To verify the biocompatibility between diamond-like carbon (DLC) film and human vascular endothelial cells and to provide evidences for construction of artificial mechanical valve prosthesis. METHODS: Nanophase DLC film was deposited using pulse laser deposition, while vascular endothelial cells derived from human umbilical vein was cultured with nanophase DLC film in vitro. Cell growth and adhesion were observed under inverted microscope, and cell proliferation was measured with MIT method. In addition, levels of nitric oxide (NO) and prostacyclin (PGI2) were measured in the DLC group and blank control group in order to evaluate their activities. RESULTS: Adhesion, proliferation, and growth of vascular endothelial cells derived from human umbilical vein were great on the surface of nanophase DLC film. There were no significant differences in the levels of NO and PGI2 between DLC group and blank control group (P > 0.05), showing that nanophase DLC film had no effect on activity of vascular endothelial cells derived from human umbilical vein. CONCLUSION: Nanophase DLC film has a good biocompatibility, and it can become an ideal material of tissue-engineering artificial mechanical valve prosthesis.%目的:验证纳米相类金刚石薄膜复合材料与人血管内皮细胞相容性,为组织上程化机械瓣膜材料的构建提供依据.方法:利用脉冲激光沉积法在人工心脏机械瓣膜上沉积纳米相类金刚石薄膜,将人脐静脉血管内皮细胞与纳米相类金刚石薄膜复合材料体外复合培养.倒置显微镜及扫描电镜观察细胞在材料表面的生长、附着情况;MTT法检测细胞在材料上增殖情况;同时分别测定人脐静脉血管内皮细胞在类金刚石溥膜材料和空白对照组中一氧化氮及前列环素分泌水平,以评价其活性.结果:人脐静脉血管内皮细胞能在纳米相类金刚石薄膜复合材料上良好地黏附、增殖、生长.人脐静脉血管内皮细胞分泌

  15. Coating silicon carbide on carbon fibers

    Energy Technology Data Exchange (ETDEWEB)

    Wang Yuqing; Wang Zuoming; Liu Min; Zhou Benlian; Shi Changxu (Inst. of Metal Research, Shenyang (China))

    1992-01-01

    The deposition of an SiC coating on the surface of carbon fibers improves their oxidation resistance and lowers their reactivity with metals at high temperature. Attention is presently given to the case of CVD SiC deposition with a view to the effects of coating thickness, deposition, and crystal structure. The presence of H(+) and other ions during CVD, as well as of free Si, is noted to decrease fiber strength. 10 refs.

  16. Coating for gasifiable carbon-graphite fibers

    Science.gov (United States)

    Harper-Tervet, Jan (Inventor); Dowler, Warren L. (Inventor); Yen, Shiao-Ping S. (Inventor); Mueller, William A. (Inventor)

    1982-01-01

    A thin, uniform, firmly adherent coating of metal gasification catalyst is applied to a carbon-graphite fiber by first coating the fiber with a film-forming polymer containing functional moieties capable of reaction with the catalytic metal ions. Multivalent metal cations such as calcium cross-link the polymer such as a polyacrylic acid to insolubilize the film by forming catalytic metal macro-salt links between adjacent polymer chains. The coated fibers are used as reinforcement for resin composites and will gasify upon combustion without evolving conductive airborne fragments.

  17. Carbon-Carbon High Melt Coating for Nozzle Extensions Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The High Melt Coating system is applied to a carbon-carbon structure and embeds HfC, ZrB2 in the outer layers. ACC High Melt builds on the time tested base material...

  18. Alumina Coating on Carbon Fibers by Sol-Gel Method

    OpenAIRE

    2006-01-01

    Alumina precursor film was coated on carbon fibers by a sol-gel method using aluminum alkoxide solution. The optimum coating condition for the concentration of alumina alkoxide and silane coupling agent was determined to uniformly coat alumina precursor on carbon fibers. Alumina precursor converted to alumina ceramics by heating at 750℃. SEM and EPMA showed that alumina ceramics was uniformly coated on carbon fibers. The thickness of alumina layer increased with increasing coating times. The ...

  19. Influence of the layer architecture of DLC coatings on their wear and corrosion resistance

    Energy Technology Data Exchange (ETDEWEB)

    Bobzin, Kirsten; Bagcivan, Nazlim; Theiss, Sebastian; Weiss, Raphael [RWTH Aachen (Germany). Inst. fuer Oberflaechentechnik; Depner, Udo; Trossmann, Torsten; Ellermeier, Joerg; Oechsner, Matthias [Technische Univ. Darmstadt (Germany). Inst. fuer Werkstoffkunde

    2012-06-15

    In this work, the influence of diamond-like carbon top layers deposited on two different types of layer architecture on wear and corrosion resistance is investigated. Physical vapour deposition coatings with a-C:H top layer of various thicknesses were deposited on plasma nitrided 42CrMo4 by reactive magnetron sputter ion plating. Beneath the top layer, an architecture with and without a-C interlayers was deposited. Investigations using potentiodynamic polarisation testing in artificial seawater as well as an impact tribometer show that it is possible to protect low-alloy heat treatable steel from both corrosion and wear by using pretreatment and an appropriate diamond-like carbon coating. Thicker a-C:H top layers as well as the addition of a-C interlayers resulted in an overall improvement in the coating behaviour. (orig.)

  20. Innovative Superhard Materials and Sustainable Coatings for Advanced Manufacturing

    Science.gov (United States)

    Lee, Jay; Novikov, Nikolay

    The book contains the results of the latest achievements of leading researchers from 9 countries in the field of diamond and diamond-like carbon, cubic boron nitride and other superhard materials; high-density engineering ceramics; high pressure-high temperature technique; computer-aided modeling; diamond, cubic boron nitride, ceramic and cemented carbide tools; development, production and applications of nanostructured materials; films and wear-resistant coating; methods for quality control of tool materials and tools.

  1. Studies on copper coating on carbon fibers

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The weak interface bonding of metal matrix reinforced by carbon fibers is the central problem of fabricating such composites. Depositing copper coating on carbon fibers is regarded as a feasible method to solve the problem. In this paper, copper coating has been deposited on the fibers through both electroless deposition and electroplating methods. Two kinds of complexing agents and two stabilizing agents are taken during the electroless plating process. The solution is stable, and little extraneous component is absorbed on the surface. After adding additive agents and increasing the concentration of H2SO4 to the acid cupric sulfate electrolyte, the "black core" during usual electroplating process is avoided. The quality of copper coating is analyzed using SEM and XRD, etc.

  2. Tribology of Carbon-Based Coatings : Past, Present, and Future

    OpenAIRE

    Broitman, Esteban; Hultman, Lars

    2013-01-01

    In this talk, the development of carbon-based coatings will be reviewed. The most recent findings in the synthesis, characterization and application of carbon-based coatings will be highlighted. Future perspectives of new fullerene-like carbon-based tribological coatings will be discussed. Novel applications of fullerene-like CNx, CPx, and CFx will be envisioned.

  3. Carbon coatings on polymers and their biocompatibility

    Energy Technology Data Exchange (ETDEWEB)

    Hubáček, T. [Department of Solid State Engineering, Institute of Chemical Technology, 16628 Prague (Czech Republic); Siegel, J., E-mail: jakub.siegel@vscht.cz [Department of Solid State Engineering, Institute of Chemical Technology, 16628 Prague (Czech Republic); Khalili, R.; Slepičková-Kasálková, N.; Švorčík, V. [Department of Solid State Engineering, Institute of Chemical Technology, 16628 Prague (Czech Republic)

    2013-06-15

    In this paper we modified the surface properties of polymer foils (polyethyleneterephthalate (PET) and polytetrafluoroethylene (PTFE)) by flash evaporation of carbon layers (C-layers). Adhesion and proliferation of vascular smooth muscle cells (VSMC) on carbon coated PTFE and PET were studied in vitro. Chemical composition of deposited C-layers was determined by Raman spectroscopy, surface contact angle was measured by goniometry. Surface morphology of carbon coated samples was studied using atomic force microscopy. Electrical properties of deposited C-layers were determined by measuring its sheet resistance. It was found that the carbon deposition leads to a decrease of surface roughness of PTFE and PET and to a significant increase of sample wettability. Electrical resistance and wettability of deposited C-layers depends significantly on both the thickness of C-layer and the type of polymeric substrate used. It was found that maximal stimulation of the VSMC (adhesion and proliferation) on carbon coated polymers depends on the surface roughness and contact angle of cell carriers used.

  4. Coating Carbon Nanotubes with Europium Oxide

    Institute of Scientific and Technical Information of China (English)

    Hui Qun CAO; Guang Yan HONG; Jing Hui YAN; Ji Lin ZHANG; Gui Xia LIU

    2003-01-01

    Carbon nanotubes (CNTS) coating with europium oxide by a simple method is reported in this letter for the first time. The CNTS were refluxed in a solution of nitric acid containing europium nitrate, and the pH value was subsequently ajusted with ammonia solution. At last, the mixture was filtered and annealed. The TEM micrograph showed that the CNTS were covered with a uniform thin layer with thickness of about 15 nm. The XRD results revealed that the CNTS were coated with europium oxide.

  5. Carbon Coating Of Copper By Arc-Discharge Pyrolysis

    Science.gov (United States)

    Ebihara, Ben T.; Jopek, Stanley

    1988-01-01

    Adherent, abrasion-resistant coat deposited with existing equipment. Carbon formed and deposited as coating on copper substrate by pyrolysis of hydrocarbon oil in electrical-arc discharges. Technique for producing carbon deposits on copper accomplished with electrical-discharge-machining equipment used for cutting metals. Applications for new coating technique include the following: solar-energy-collecting devices, coating of metals other than copper with carbon, and carburization of metal surfaces.

  6. Thin Coatings of Polymeric Carbon and Carbon Nanotubes for Corrosion Protection

    Science.gov (United States)

    2009-02-01

    Carbon Nanotube Functionalization /Doping Polyvinylpyrrolidone (PVP) A) p-Doping C) Polymer Wrapping Model B) n-Doping Polyethyleneimine ( PEI ) SWCNT Paint...fluorine-containing) groups functions as the barrier layer Multilayer Smart Carbon Nanotube Coating Insoluble polymer layer top coating -PMMA Substrate...Thin Coatings of Polymeric Carbon and Carbon Nanotubes for Corrosion Protection Zafar Iqbal Department of Chemistry and Environmental Science New

  7. Magnetron reactively sputtered Ti-DLC coatings on HNBR rubber: The influence of substrate bias

    OpenAIRE

    Bui, X. L.; Pei, Y.T.; De Hosson, J. Th. M.

    2008-01-01

    In this study, Ti-containing diamond-like carbon (Ti-DLC) coatings have been deposited on HNBR (hydrogenated nitrile butadiene) rubber and also on Si wafer as reference via unbalanced magnetroli reactive sputtering from a Ti target in C2H2/Ar plasma. The deposition rates of coatings on rubber and Si wafer were about the same. Columnar structures resulting from a rough interface were often observed in the coatings deposited on rubbers. Only at a high bias voltage of -300 V the coating on HNBR ...

  8. Oxidation of Carbon/Carbon through Coating Cracks

    Science.gov (United States)

    Jacobson, N. S.; Roth, d. J.; Rauser, R. W.; Cawley, J. D.; Curry, D. M.

    2008-01-01

    Reinforced carbon/carbon (RCC) is used to protect the wing leading edge and nose cap of the Space Shuttle Orbiter on re-entry. It is composed of a lay-up of carbon/carbon fabric protected by a SiC conversion coating. Due to the thermal expansion mismatch of the carbon/carbon and the SiC, the SiC cracks on cool-down from the processing temperature. The cracks act as pathways for oxidation of the carbon/carbon. A model for the diffusion controlled oxidation of carbon/carbon through machined slots and cracks is developed and compared to laboratory experiments. A symmetric cylindrical oxidation cavity develops under the slots, confirming diffusion control. Comparison of cross sectional dimensions as a function of oxidation time shows good agreement with the model. A second set of oxidation experiments was done with samples with only the natural craze cracks, using weight loss as an index of oxidation. The agreement of these rates with the model is quite reasonab

  9. Carbon coated textiles for flexible energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Jost, Kristy [Drexel Univ., Philadelphia, PA (United States). Fashion, Product, Design and Merchandising Dept., A. J. Drexel Nanotechnology Inst. and Dept. of Materials Science and Engineering; Perez, Carlos R. [Drexel Univ., Philadelphia, PA (United States). A. J. Drexel Nanotechnology Inst. and Dept. of Materials Science and Engineering; McDonough, John K. [Drexel Univ., Philadelphia, PA (United States). A. J. Drexel Nanotechnology Inst. and Dept. of Materials Science and Engineering; Presser, Volker [Drexel Univ., Philadelphia, PA (United States). A. J. Drexel Nanotechnology Inst. and Dept. of Materials Science and Engineering; Heon, Min [Drexel Univ., Philadelphia, PA (United States). A. J. Drexel Nanotechnology Inst. and Dept. of Materials Science and Engineering; Dion, Genevieve [Drexel Univ., Philadelphia, PA (United States). Fashion, Product, Design and Merchandising Dept.; Gogotsi, Yury [Drexel Univ., Philadelphia, PA (United States). A. J. Drexel Nanotechnology Inst. and Dept. of Materials Science and Engineering

    2011-10-20

    This paper describes a flexible and lightweight fabric supercapacitor electrode as a possible energy source in smart garments. We examined the electrochemical behavior of porous carbon materials impregnated into woven cotton and polyester fabrics using a traditional printmaking technique (screen printing). The porous structure of such fabrics makes them attractive for supercapacitor applications that need porous films for ion transfer between electrodes. We used cyclic voltammetry, galvanostatic cycling and electrochemical impedance spectroscopy to study the capacitive behaviour of carbon materials using nontoxic aqueous electrolytes including sodium sulfate and lithium sulfate. Electrodes coated with activated carbon (YP17) and tested at ~0.25 A·g⁻¹ achieved a high gravimetric and areal capacitance, an average of 85 F·g⁻¹ on cotton lawn and polyester microfiber, both corresponding to ~0.43 F·cm⁻².

  10. Preparation of a MFI zeolite coating on activated carbon

    NARCIS (Netherlands)

    Vaart, van der R.; Bosch, H.; Keizer, K.; Reith, T.

    1997-01-01

    A new and simple method for the preparation of MFI zeolite coated activated carbon is presented. Suitable nucleation sites for the growth of zeolites were introduced to the carbon by adding hydrophilic montmorillonite clay to the carbon substrate. A gas tight MFI zeolite coating was obtained on this

  11. DLC coatings for hydraulic applications

    Institute of Scientific and Technical Information of China (English)

    Luca NOBILI; Luca MAGAGNIN

    2009-01-01

    Replacement of lubricating oils with water or low-viscosity fluids is highly desirable in many industrial fields, on account of the environmental and economical advantages. Low lubricity of water might be insufficient for proper operation of hydraulic components, and diamond-like carbon(DLC) coatings are very attractive as solid lubricant films. A remote-plasma PACVD process was utilized to deposit hydrogenated DLC coatings (a-C:H) on different substrates. Microindentation measurements show that the coating hardness is around 35 GPa. Tribological behavior was evaluated by block-on-ring tests performed in water and water with alumina. The wear rate was calculated after measuring the wear volume by a laser profilemeter. Morphological and compositional analysis of the wear tracks reveal that coating failure may occur by abrasive wear or delamination, depending on the substrate properties. Hard and smooth substrates give the best results and dispersed alumina particles increase the wear rate.

  12. Tough ceramic coatings: Carbon nanotube reinforced silica sol-gel

    Energy Technology Data Exchange (ETDEWEB)

    Lopez, A.J., E-mail: antoniojulio.lopez@urjc.es [Dept. de Ciencia e Ingenieria de Materiales, ESCET, Universidad Rey Juan Carlos, C/Tulipan s/n, Mostoles 28933, Madrid (Spain); Rico, A.; Rodriguez, J.; Rams, J. [Dept. de Ciencia e Ingenieria de Materiales, ESCET, Universidad Rey Juan Carlos, C/Tulipan s/n, Mostoles 28933, Madrid (Spain)

    2010-08-15

    Silica coatings reinforced with carbon nanotubes were produced via sol-gel route using two mixing techniques of the sol-gel precursors, mechanical and ultrasonic mixing, and dip-coating as deposition process on magnesium alloy substrates. Effective incorporation and distribution of 0.1 wt.% of carbon nanotubes in the amorphous silica matrix of the coatings were achieved using both techniques. Fabrication procedure determines the morphological aspects of the coating. Only mechanical mixing process produced coatings dense and free of defects. Nanoindentation technique was used to examine the influence of the fabrication process in the mechanical features of the final coatings, i.e. indentation fracture toughness, Young's modulus and hardness. A maximum toughening effect of about 24% was achieved in silica coatings reinforced with carbon nanotubes produced by the mechanical mixing route. Scanning electron microscopy investigation revealed that the toughening of these reinforced coatings was mainly due to bridging effect of the reinforcement.

  13. Carbon nanotube and graphene nanoribbon-coated conductive Kevlar fibers.

    Science.gov (United States)

    Xiang, Changsheng; Lu, Wei; Zhu, Yu; Sun, Zhengzong; Yan, Zheng; Hwang, Chi-Chau; Tour, James M

    2012-01-01

    Conductive carbon material-coated Kevlar fibers were fabricated through layer-by-layer spray coating. Polyurethane was used as the interlayer between the Kevlar fiber and carbon materials to bind the carbon materials to the Kevlar fiber. Strongly adhering single-walled carbon nanotube coatings yielded a durable conductivity of 65 S/cm without significant mechanical degradation. In addition, the properties remained stable after bending or water washing cycles. The coated fibers were analyzed using scanning electron microcopy and a knot test. The as-produced fiber had a knot efficiency of 23%, which is more than four times higher than that of carbon fibers. The spray-coating of graphene nanoribbons onto Kevlar fibers was also investigated. These flexible coated-Kevlar fibers have the potential to be used for conductive wires in wearable electronics and battery-heated armors.

  14. Thermoplastic coated carbon fibers for textile preforms

    Science.gov (United States)

    Allen, L. E.; Edie, D. D.; Lickfield, G. C.; Mccollum, J. R.

    1988-01-01

    A continuous process for producing prepreg from carbon fiber and thermoplastic matrix is described. After the tow has been spread using a pneumatic device, the process utilizes a fluidized bed to apply thermoplastic powder to the bundle. Finally, direct electrical heating of the coated fiber tow melts the polymer on the individual fibers, creating a uniform and extremely flexible prepreg. The efficiency of the process was evaluated during initial trials in which a thermoplastic polyimide, LaRC-TPI, was applied to T-300, 3K (3000 filament) carbon fiber tow. The physical properties of unidirectional composite specimens fabricated from this prepreg were measured, and the matrix uniformity and void content of the samples was determined. The results of these evaluations are detailed and discussed.

  15. Diamondlike carbon protective coatings for optical windows

    Science.gov (United States)

    Swec, Diane M.; Mirtich, Michael J.

    1989-01-01

    Diamondlike carbon (DLC) films were deposited on infrared transmitting optical windows and were evaluated as protective coatings for these windows exposed to particle and rain erosion. The DLC films were deposited on zinc selenide (ZnSe) and zinc sulfide (ZnS) by three different ion beam methods: (1) sputter deposition from a carbon target using an 8-cm argon ion source; (2) direct deposition by a 30-cm hollow cathode ion source with hydrocarbon gas in argon; and (3) dual beam direct deposition by the 30-cm hollow cathode ion source and an 8-cm argon ion source. In an attempt to improve the adherence of the DLC films on ZnSc and ZnS, ion beam cleaning, ion implantation with helium and neon ions, or sputter deposition of a thin, ion beam intermediate coating was employed prior to deposition of the DLC film. The protection that the DLC films afforded the windows from particle and rain erosion was evaluated, along with the hydrogen content, adherence, intrinsic stress, and infrared transmittance of the films. Because of the elevated stress levels in the ion beam sputtered DLC films and in those ion beam deposited with butane, films thicker than 0.1 micron and with good adherence on ZnS and ZnSe could not be generated. An intermediate coating of germanium successfully allowed the DLC films to remain adherent to the optical windows and caused only negligible reduction in the specular transmittance of the ZnS and ZnSe at 10 microns.

  16. Ultimate strength of crystals, nanoparticles and nano-ceramics having diamond-like structure

    Directory of Open Access Journals (Sweden)

    Dora Zakarian

    2016-11-01

    Full Text Available A mathematical model for calculating the interplanar interaction energy of diamond-like structure ceramics at free surface of stock material in pseudopotential method has been developed. We have considered uniaxial [111] deformation of materials and obtained the “inverse Hall–Petch’s law” for strength. It is shown that nanoceramics has higher strength than the nanoparticles included in its composition.

  17. Julia sets and complex singularities in diamond-like hierarchical Potts models

    Institute of Scientific and Technical Information of China (English)

    QIAO; Jianyong

    2005-01-01

    We study the phase transition of the Potts model on diamond-like hierarchical lattices. It is shown that the set of the complex singularities is the Julia set of a rational mapping. An interesting problem is how are these singularities continued to the complex plane. In this paper, by the method of complex dynamics, we give a complete description about the connectivity of the set of the complex singularities.

  18. Silver-doped nanocomposite carbon coatings (Ag-DLC) for biomedical applications – Physiochemical and biological evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Bociaga, Dorota, E-mail: dorota.bociaga1@gmail.com [Division of Biomedical Engineering and Functional Materials, Lodz University of Technology, Institute of Materials Science and Engineering, 1/15 Stefanowskiego St., 90-924 Lodz (Poland); Komorowski, Piotr [Division of Biophysics, Lodz University of Technology, Institute of Materials Science and Engineering, 1/15 Stefanowskiego St., 90-924 Lodz (Poland); BioNanoPark Laboratories of Lodz Regional Park of Science and Technology, Lodz (Poland); Batory, Damian [Division of Biomedical Engineering and Functional Materials, Lodz University of Technology, Institute of Materials Science and Engineering, 1/15 Stefanowskiego St., 90-924 Lodz (Poland); Szymanski, Witold [Division of Biophysics, Lodz University of Technology, Institute of Materials Science and Engineering, 1/15 Stefanowskiego St., 90-924 Lodz (Poland); Olejnik, Anna; Jastrzebski, Krzysztof [Division of Biomedical Engineering and Functional Materials, Lodz University of Technology, Institute of Materials Science and Engineering, 1/15 Stefanowskiego St., 90-924 Lodz (Poland); Jakubowski, Witold [Division of Biophysics, Lodz University of Technology, Institute of Materials Science and Engineering, 1/15 Stefanowskiego St., 90-924 Lodz (Poland)

    2015-11-15

    Graphical abstract: - Highlights: • The DLC coatings with interlayer improving adhesion were manufactured using the author's method in dual RF/MS PCVD system. • The Ag ions were incorporated into DLC matrix using ion beam implantation method. • The morphology, chemical structure and composition of coatings were examined. • Viability, cytotoxicity of human cells and the formation of bacterial biofilm on the samples surface were evaluated. • <5% of Ag in DLC coating is efficient to make it bactericidal and biocompatible. - Abstract: The formation of bacteria biofilm on the surface of medical products is a major clinical issue nowadays. Highly adaptive ability of bacteria to colonize the surface of biomaterials causes a lot of infections. This study evaluates samples of the AISI 316 LVM with special nanocomposite silver-doped (by means of ion implantation) diamond-like carbon (DLC) coating prepared by hybrid RF/MS PACVD (radio frequency/magnetron sputtering plasma assisted chemical vapour deposition) deposition technique in order to improve the physicochemical and biological properties of biomaterials and add new features such as antibacterial properties. The aim of the following work was to evaluate antimicrobial efficacy and biocompatibility of gradient a-C:H/Ti + Ag coatings in relation to the physiochemical properties of the surface and chemical composition of coating. For this purpose, samples were tested in live/dead test using two cell strains: human endothelial cells (Ea.hy926) and osteoblasts-like cells (Saos-2). For testing bactericidal activity of the coatings, an exponential growth phase of Escherichia coli strain DH5α was used as a model microorganism. Surface condition and its physicochemical properties were investigated using SEM, AFM and XPS. Examined coatings showed a uniformity of silver ions distribution in the amorphous DLC matrix, good biocompatibility in contact with mammalian cells and an increased level of bactericidal

  19. Carbon based prosthetic devices

    Energy Technology Data Exchange (ETDEWEB)

    Devlin, D.J.; Carroll, D.W.; Barbero, R.S.; Archuleta, T. [Los Alamos National Lab., NM (US); Klawitter, J.J.; Ogilvie, W.; Strzepa, P. [Ascension Orthopedics (US); Cook, S.D. [Tulane Univ., New Orleans, LA (US). School of Medicine

    1998-12-31

    This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The project objective was to evaluate the use of carbon/carbon-fiber-reinforced composites for use in endoprosthetic devices. The application of these materials for the metacarpophalangeal (MP) joints of the hand was investigated. Issues concerning mechanical properties, bone fixation, biocompatibility, and wear are discussed. A system consisting of fiber reinforced materials with a pyrolytic carbon matrix and diamond-like, carbon-coated wear surfaces was developed. Processes were developed for the chemical vapor infiltration (CVI) of pyrolytic carbon into porous fiber preforms with the ability to tailor the outer porosity of the device to provide a surface for bone in-growth. A method for coating diamond-like carbon (DLC) on the articulating surface by plasma-assisted chemical vapor deposition (CVD) was developed. Preliminary results on mechanical properties of the composite system are discussed and initial biocompatibility studies were performed.

  20. High surface area silicon carbide-coated carbon aerogel

    Science.gov (United States)

    Worsley, Marcus A; Kuntz, Joshua D; Baumann, Theodore F; Satcher, Jr, Joe H

    2014-01-14

    A metal oxide-carbon composite includes a carbon aerogel with an oxide overcoat. The metal oxide-carbon composite is made by providing a carbon aerogel, immersing the carbon aerogel in a metal oxide sol under a vacuum, raising the carbon aerogel with the metal oxide sol to atmospheric pressure, curing the carbon aerogel with the metal oxide sol at room temperature, and drying the carbon aerogel with the metal oxide sol to produce the metal oxide-carbon composite. The step of providing a carbon aerogel can provide an activated carbon aerogel or provide a carbon aerogel with carbon nanotubes that make the carbon aerogel mechanically robust. Carbon aerogels can be coated with sol-gel silica and the silica can be converted to silicone carbide, improved the thermal stability of the carbon aerogel.

  1. Residual stress measurement in carbon coatings of optical fibers from the fiber bending curvature and coating thickness difference

    Science.gov (United States)

    Shiue, Sham-Tsong; Lin, Hung-Chien; Shen, Ting-Ying; Ouyang, Hao

    2005-06-01

    The residual stress measurement in carbon coatings of optical fibers is theoretically and experimentally investigated. A simple formula used to measure the residual stresses in the thin film deposited on a cylindrical substrate with the bending curvature is proposed. During a temperature drop, the carbon-coated optical fiber is bent due to the nonuniform deposition of coating materials. The axial residual stresses in carbon coatings of optical fibers can be measured from the fiber bending curvature and coating thickness difference. Furthermore, if Young's modulus of carbon coatings is known, the thermal expansion coefficient of carbon coatings can be determined.

  2. Carbon nanotube-based coatings on titanium

    Indian Academy of Sciences (India)

    Elzbieta Dlugon; Wojciech Simka; Aneta Fraczek-Szczypta; Wiktor Niemiec; Jaroslaw Markowski; Marzena Szymanska; Marta Blazewicz

    2015-09-01

    This paper reports results of the modification of titanium surface with multiwalled carbon nanotubes (CNTs). The Ti samples were covered with CNTs via electrophoretic deposition (EPD) process. Prior to EPD process, CNTs were functionalized by chemical treatment. Mechanical, electrochemical and biological properties of CNT-covered Ti samples were studied and compared to those obtained for unmodified titanium surface. Atomic force microscopy was used to investigate the surface topography. To determine micromechanical characteristics of CNT-covered metallic samples indentation tests were conducted. Throughout electrochemical studies were performed in order to characterize the impact of the coating on the corrosion of titanium substrate. In vitro experiments were conducted using the human osteoblast NHOst cell line. CNT layers shielded titanium from corrosion gave the surface-enhanced biointegrative properties. Cells proliferated better on the modified surface in comparison to unmodified titanium. The deposited layer enhanced cell adhesion and spreading as compared to titanium sample.

  3. Lubrication by Diamond and Diamondlike Carbon Coatings

    Science.gov (United States)

    Miyoshi, Kazuhisa

    1997-01-01

    Regardless of environment (ultrahigh vacuum, humid air, dry nitrogen, or water), ion-beam-deposited diamondlike carbon (DLC) and nitrogen-ion-implanted, chemical-vapor-deposited (CVD) diamond films had low steady-state coefficients of friction (less than 0.1) and low wear rates (less than or equal to 10(exp -6)cu mm/N(dot)m). These films can be used as effective wear-resistant, self-lubricating coatings regardless of environment. On the other hand, as-deposited, fine-grain CVD diamond films; polished, coarse-grain CVD diamond films; and polished and then fluorinated, coarse-grain CVD diamond films can be used as effective wear-resistant, self-lubricating coatings in humid air, in dry nitrogen, and in water, but they had a high coefficient of friction and a high wear rate in ultrahigh vacuum. The polished, coarse-grain CVD diamond film revealed an extremely low wear rate, far less than 10(exp 10) cu mm/N(dot)m, in water.

  4. Deposition and tribological behaviour of sputtered carbon hard coatings

    Energy Technology Data Exchange (ETDEWEB)

    Yang, S.; Camino, D.; Jones, A.H.S.; Teer, D.G. [Teer Coatings Ltd., Hartlebury (United Kingdom)

    2000-02-21

    The exceptional tribological properties of low deposition temperature sputtered carbon coatings (Graphit-iC coatings) have been recently reported. This paper describes the latest development of these coatings and particularly how, by an optimisation of the deposition parameters, it has been possible to obtain relative soft to very hard coatings with extremely low specific wear rates. The coatings have been deposited in a closed field unbalanced magnetron sputter ion plating (CFUBMSIP) installation. By applying the appropriate conditions of deposition, carbon coatings with hardness from 1500 to 4000 HV can be routinely deposited. Preliminary analytical results are presented in order to characterise such hard coatings: high-resolution transmission electron microscopy, scanning electron microscopy and X-ray diffraction analysis are some of the different techniques used for this work. Finally, a number of the applications are reported with tribological test results. (orig.)

  5. Optimization and characterization of adhesion properties of DLC coatings on different substrates

    Science.gov (United States)

    Waseem, B.; Alam, S.; Irfan, M.; Shahid, M.; Soomro, B. D.; Hashim, S.; Iqbal, R.

    2014-06-01

    The Diamond Like Carbon coatings (DLC) are gaining prime importance in the field of surface engineering especially cutting tools technology. The self lubricating property of these coatings makes them unique among other coatings like TiN, TiAlN, CrN etc. Unlike other coatings, DLC coatings give better surface finish and their self lubrication reduces the wear of a part to large extent. In present work, different substrates were selected to study the wear and adhesion behavior of DLC coatings. The coating was produced by physical Vapor Deposition (PVD) technique and the adhesive properties of DLC coatings were analyzed under ambient conditions using nano Scratch testing. Scanning electron microscope (SEM) was used to observe the scratches and their mechanisms.

  6. Tribological Characteristics of Chromium-active Carbon Electroplated Composite Coatings

    Institute of Scientific and Technical Information of China (English)

    GUKa-fi; HUAMeng; Yi-min

    2004-01-01

    A process of chromium electroplating using a standard bath with additives and active carbon particles was reported, and the tribological behaviors of the composite coatings using the pin-on-disk tester and the table wear tester were i nvestig(aed. Experimental results indicate that the electroplated chromium-active carbon composite coatings exhibited the low friction coefficient anti excellent anti-wear properties whets coffered with the normal chromium electroplated ones. The formation of active carbon particles within the chromium matrices can be explained by SEM analysis and the mechanis of wear resistance of the composite coatings were studied.

  7. Possible Diamond-Like Nanoscale Structures Induced by Slow Highly-Charged Ions on Graphite (HOPG)

    Energy Technology Data Exchange (ETDEWEB)

    Sideras-Haddad, E.; Schenkel, T.; Shrivastava, S.; Makgato, T.; Batra, A.; Weis, C. D.; Persaud, A.; Erasmus, R.; Mwakikunga, B.

    2009-01-06

    The interaction between slow highly-charged ions (SHCI) of different charge states from an electron-beam ion trap and highly oriented pyrolytic graphite (HOPG) surfaces is studied in terms of modification of electronic states at single-ion impact nanosizeareas. Results are presented from AFM/STM analysis of the induced-surface topological features combined with Raman spectroscopy. I-V characteristics for a number of different impact regions were measured with STM and the results argue for possible formation of diamond-like nanoscale structures at the impact sites.

  8. ANALYSIS OF THE FUNDAMENTAL CHARACTERISTICS OF DIAMOND-LIKE CRYSTALS AND LOW-DIMENSIONAL STRUCTURES

    Directory of Open Access Journals (Sweden)

    V.G.Litovchenko

    2004-01-01

    Full Text Available The principle has been developed for systematizing the diamond-like crystals with tetrahedral structure of the elementary cells and with valence chemical bonds, based on the calculation of the lattice constant. The approach proposed permits to predict basic parameters such as energy gap Eg, electron affinity (optical work function X, mechanical hardness H, melting temperature Tm, optical phonon frequency etc. These parameters have been calculated and the table is presented for a number of chemical compositions. For materials with mixed chemical bonds (valence and ionic the corrections can be calculated using Pouling electronegativity conception. The comparison with experiment demonstrates good agreement between the latter and the proposed procedure.

  9. Modulation polarimetry of full internal reflection, broken by diamond-like films

    Directory of Open Access Journals (Sweden)

    Maksimenko L. S.

    2013-02-01

    Full Text Available This article presents research results on diamond-like films produced under different technological conditions. The parameter ρ — polarization difference — has been introduced. It has been found from spectral features of the parameter ρ that the interaction of electromagnetic radiation with the electronic system of specimens, which occurs in the used spectral range, consists of local and polariton surface resonances, differing in frequencies and times of relaxations. The autors concluded that the correlation in resonance intensity is defined by the structural characteristics of the specimens. These results show that modulation polarimetry is a perspective technique for diagnostics of the structural homogeneity of composite nanocluster films.

  10. A Study of Cooling Time Reduction of Interferometric Cryogenic Gravitational Wave Detectors Using a High-Emissivity Coating

    CERN Document Server

    Sakakibara, Y; Suzuki, T; Yamamoto, K; Chen, D; Koike, S; Tokoku, C; Uchiyama, T; Ohashi, M; Kuroda, K

    2013-01-01

    In interferometric cryogenic gravitational wave detectors, there are plans to cool mirrors and their suspension systems (payloads) in order to reduce thermal noise, that is, one of the fundamental noise sources. Because of the large payload masses (several hundred kg in total) and their thermal isolation, a cooling time of several months is required. Our calculation shows that a high-emissivity coating (e.g. a diamond-like carbon (DLC) coating) can reduce the cooling time effectively by enhancing radiation heat transfer. Here, we have experimentally verified the effect of the DLC coating on the reduction of the cooling time.

  11. Superhydrophobic activated carbon-coated sponges for separation and absorption.

    Science.gov (United States)

    Sun, Hanxue; Li, An; Zhu, Zhaoqi; Liang, Weidong; Zhao, Xinhong; La, Peiqing; Deng, Weiqiao

    2013-06-01

    Highly porous activated carbon with a large surface area and pore volume was synthesized by KOH activation using commercially available activated carbon as a precursor. By modification with polydimethylsiloxane (PDMS), highly porous activated carbon showed superhydrophobicity with a water contact angle of 163.6°. The changes in wettability of PDMS- treated highly porous activated carbon were attributed to the deposition of a low-surface-energy silicon coating onto activated carbon (confirmed by X-ray photoelectron spectroscopy), which had microporous characteristics (confirmed by XRD, SEM, and TEM analyses). Using an easy dip-coating method, superhydrophobic activated carbon-coated sponges were also fabricated; those exhibited excellent absorption selectivity for the removal of a wide range of organics and oils from water, and also recyclability, thus showing great potential as efficient absorbents for the large-scale removal of organic contaminants or oil spills from water.

  12. Tungsten disulphide coated multi-walled carbon nanotubes

    Science.gov (United States)

    Whitby, R. L. D.; Hsu, W. K.; Boothroyd, C. B.; Kroto, H. W.; Walton, D. R. M.

    2002-06-01

    Multi-walled carbon nanotubes (MWCNs), coated with ordered WS 2 mono- or multi-layers, are generated by pyrolysing H 2S/N 2 over MWCNs thinly coated with WO 3. High-resolution transmission electron microscopy (HRTEM) reveals the presence of hexagonal WS 2 arrays in the tube surface, consistent with the WS 2 simulated structure.

  13. On the nature of interface of carbon nanotube coated carbon fibers with different polymers

    Science.gov (United States)

    Singh Bedi, Harpreet; Padhee, Srikant S.; Agnihotri, Prabhat K.

    2016-07-01

    Experimental investigations are carried out to analyse the wetting behaviour of carbon nanotube (CNT) coated carbon fiber to determine their suitability to process carbon nanotube coated carbon fiber/polymer multiscale composites for structural applications. To overcome the problem of agglomeration, CNTs are grown directly on the surface of carbon fibers as well as fabric using thermal chemical vapour deposition (CVD) technique. The term multiscale is used because different reinforcement mechanisms operate at the scale of long fibers and CNTs which are of few micrometers in length. The load carrying capacity of these multiscale composites critically depends on the efficiency and extent of load transfer from low strength matrix to high strength fiber which in turn depends on the interfacial strength between CNT coated carbon fiber and polymer matrix. A systematic analysis of wetting behaviour of CNT coated carbon fiber with epoxy and polyester matrix is carried out in this study. It is shown that CNT coated carbon fibers as well as fabric show better wettability with epoxy matrix as compared to polyester matrix. This results in stronger interface of CNT coated carbon fiber with epoxy as compared to polyester in multiscale composite system. A similar observation is made in nanoindentation testing of single fiber multiscale composites processed with epoxy and polyester matrix. In addition, it is observed that wettability, interfacial strength and average properties of CNT coated carbon fiber/polymer composites are a function of CNT density on the surface of carbon fibers.

  14. Interactions between the glass fiber coating and oxidized carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Ku-Herrera, J.J., E-mail: jesuskuh@live.com.mx [Centro de Investigación Científica de Yucatán A.C., Unidad de Materiales, Calle 43 No.130, Col. Chuburná de Hidalgo. C.P., 97200 Mérida, Yucatán (Mexico); Avilés, F., E-mail: faviles@cicy.mx [Centro de Investigación Científica de Yucatán A.C., Unidad de Materiales, Calle 43 No.130, Col. Chuburná de Hidalgo. C.P., 97200 Mérida, Yucatán (Mexico); Nistal, A. [Instituto de Cerámica y Vidrio (ICV-CSIC), Kelsen 5, 28049 Madrid (Spain); Cauich-Rodríguez, J.V. [Centro de Investigación Científica de Yucatán A.C., Unidad de Materiales, Calle 43 No.130, Col. Chuburná de Hidalgo. C.P., 97200 Mérida, Yucatán (Mexico); Rubio, F.; Rubio, J. [Instituto de Cerámica y Vidrio (ICV-CSIC), Kelsen 5, 28049 Madrid (Spain); Bartolo-Pérez, P. [Departamento de Física Aplicada, Cinvestav, Unidad Mérida, C.P., 97310 Mérida, Yucatán (Mexico)

    2015-03-01

    Graphical abstract: - Highlights: • Oxidized multiwall carbon nanotubes (MWCNTs) were deposited onto E-glass fibers. • The role of the fiber coating on the deposition of MWCNTs on the fibers is studied. • A rather homogeneous deposition of MWCNTs is achieved if the coating is maintained. • Multiple oxygen-containing groups were found in the analysis of the fiber coating. • Evidence of chemical interaction between MWCNTs and the fiber coating was found. - Abstract: Chemically oxidized multiwall carbon nanotubes (MWCNTs) were deposited onto commercial E-glass fibers using a dipping procedure assisted by ultrasonic dispersion. In order to investigate the role of the fiber coating (known as “sizing”), MWCNTs were deposited on the surface of as-received E-glass fibers preserving the proprietary coating as well as onto glass fibers which had the coating deliberately removed. Scanning electron microscopy and Raman spectroscopy were used to assess the distribution of MWCNTs onto the fibers. A rather homogeneous coverage with high density of MWCNTs onto the glass fibers is achieved when the fiber coating is maintained. Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and nuclear magnetic resonance (NMR) analyses of the chemical composition of the glass fiber coating suggest that such coating is a complex mixture with multiple oxygen-containing functional groups such as hydroxyl, carbonyl and epoxy. FTIR and XPS of MWCNTs over the glass fibers and of a mixture of MWCNTs and fiber coating provided evidence that the hydroxyl and carboxyl groups of the oxidized MWCNTs react with the oxygen-containing functional groups of the glass fiber coating, forming hydrogen bonding and through epoxy ring opening. Hydrogen bonding and ester formation between the functional groups of the MWCNTs and the silane contained in the coating are also possible.

  15. Microtribology of Nitrogen-doped Amorphous Carbon Coatings

    Institute of Scientific and Technical Information of China (English)

    Dong F. Wang

    2004-01-01

    The friction, wear and lubrication of carbon nitride coatings on silicon substrates are studied using a spherical diamond counter-face with nano-scale asperities. The first part of this paper clarifies the coating thickness effect on frictional behavior of carbon nitride coatings. The second part of this paper reports empirical data on wear properties in repeated sliding contacts through in situ examination and post-sliding observation. The third part will concentrate on wear mechanisms for the transition from "No observable wear particles" to "Wear particle generation." In light of the above tribological study, the application of carbon nitride coatings to MicroElectroMechanical system (MEMS) is therefore discussed from view points of both microtribology and micromachining.

  16. FTIR Spectroscopy for Carbon Family Study.

    Science.gov (United States)

    Ţucureanu, Vasilica; Matei, Alina; Avram, Andrei Marius

    2016-11-01

    Fourier transform Infrared (FTIR) spectroscopy is a versatile technique for the characterization of materials belonging to the carbon family. Based on the interaction of the IR radiation with matter this technique may be used for the identification and characterization of chemical structures. Most important features of this method are: non-destructive, real-time measurement and relatively easy to use. Carbon basis for all living systems has found numerous industrial applications from carbon coatings (i.e. amorphous and nanocrystalline carbon films: diamond-like carbon (DLC) films) to nanostructured materials (fullerenes, nanotubes, graphene) and carbon materials at nanoscale or carbon dots (CDots). In this paper, we present the FTIR vibrational spectroscopy for the characterization of diamond, amorphous carbon, graphite, graphene, carbon nanotubes (CNTs), fullerene and carbon quantum dots (CQDs), without claiming to cover entire field.

  17. 磁控溅射Al靶功率对类金刚石薄膜结构和摩擦学性能的影响%Effect of Al Target Power of Magnetron Sputtering on the Structure and Tribological Properties of Diamond-like Carbon Films

    Institute of Scientific and Technical Information of China (English)

    周升国; 王立平; 薛群基

    2011-01-01

    本文采用中频磁控溅射金属Al靶,以CH4为反应气体,通过调整Al靶溅射功率,在p(100)单晶硅片和不锈钢基底上成功制备出不同Al含量的Al/a-C∶H纳米复合薄膜.并利用HR-TEM、XPS、纳米压痕仪和摩擦磨损试验机等手段分析和研究了Al/a-C∶H薄膜的结构、机械及摩擦学性能.结果表明:金属Al以纳米晶颗粒形式镶嵌在非晶碳网络中,使得所制备Al/a-C∶H薄膜呈现出典型的纳米晶/非晶复合结构;同时,Al掺杂促进了薄膜中sp2杂化碳形成,且有效地释放残余内应力.Al靶溅射功率为800W时所制备的Al/a-C∶H薄膜具有结构致密、内应力低、硬度高的特性;在大气环境中,该薄膜与Si3N4陶瓷球干摩擦时显示出优越的摩擦学性能,其摩擦系数约为0.055,磨损率约为2.9×10-16m3/(N·m).%Aluminum/amorphous hydrogenated carbon (Al/a-C: H) nanocomposite thin films were deposited on silicon p( 100) wafer and stainless steel substrates by magnetron sputtering of aluminum in an argon and methane atmosphere with different Al target power. The composition, microstructure, mechanical and tribological properties of composite films were systemically investigated by HR - TEM, XPS, nano - indenter and tribo - tester. The results showed that the Al nanocrystallites could be easily formed in the amorphous carbon matrix, the sp2 hybrid carbon was increased as the Al was embedded into the films, and Al - doping could relax the internal stress whilst keeping high hardness of as - deposited films. The film containing 4.7 % Al prepared by target power of 800 W exhibited a high hardness about 16.5 Cpa, a low internal stress about 0.62 Gpa, a low friction coefficient about 0.055 and a low wear rate about 2.9 × 10-16 m3/(N ? M) in the ambient atmosphere.

  18. Hard Carbon Films Deposited under Various Atmospheres

    Science.gov (United States)

    Wei, M.-K.; Chen, S.-C.; Wu, T. C.; Lee, Sanboh

    1998-03-01

    Using a carbon target ablated with an XeCl-excimer laser under various gas atmospheres at different pressures, hard carbon was deposited on silicon, iron and tungsten carbide substrates. The hardness, friction coefficient, and wear rate of the film against steel are better than pure substrate material, respectively, so that it has potential to be used as a protective coating for micromechanical elements. The influences of gas pressure, gas atmosphere, and power density of laser irradiation on the thermal stability of film were analyzed by means of Raman-spectroscope, time-of-flight method, and optical emission spectrum. It was found that the film deposited under higher pressure has less diamond-like character. The film deposited under rest gas or argon atmosphere was very unstable and looked like a little graphite-like character. The film deposited at high vacuum (10-5 mbar rest gas) was the most stable and looked like the most diamond-like character. The film deposited at higher power density was more diamond-like than that at lower power density.

  19. Electrochemical corrosion behavior of carbon steel with bulk coating holidays

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    With epoxy coal tar as the coating material, the electrochemical corrosion behavior of Q235 with different kinds of bulk coating holidays has been investigated with EIS (Electrochemical Impedance Spectroscopy) in a 3.5vol% NaCl aqueous solution.The area ratio of bulk coating holiday to total coating area of steel is 4.91%. The experimental results showed that at free corrosionpotential, the corrosion of carbon steel with disbonded coating holiday is heavier than that with broken holiday and disbonded & broken holiday with time; Moreover, the effectiveness of Cathodic Protection (CP) of carbon steel with broken holiday is better than that with disbonded holiday and disbonded & broken holiday on CP potential -850 mV (vs CSE). Further analysis indicated that the two main reasons for corrosion are electrolyte solution slowly penetrating the coating, and crevice corrosion at steel/coating interface near holidays. The ratio of impedance amplitude (Z) of different frequency to minimum frequency is defined as K value. The change rate of K with frequency is related to the type of coating holiday.

  20. Glassy Carbon Coating Deposited on Hybrid Structure of Composite Materials

    Directory of Open Access Journals (Sweden)

    Posmyk A.

    2016-06-01

    Full Text Available This paper presents a method of production metal matrix composites with aluminum oxide foam covered by glassy carbon layer used as reinforcement. The glassy carbon coating was formed for decreasing of friction coefficient and reducing the wear. In first step of technology liquid glassy carbon precursor is on ceramic foam deposited, subsequently cured and carbonated at elevated temperature. In this way ceramic foam is covered with glassy carbon coating with thickness of 2-8 μm. It provides desirable amount of glassy carbon in the structure of the material. In the next step, porous spheres with carbon coating are infiltrated by liquid matrix of Al-Cu-Mg alloy. Thereby, equable distribution of glassy carbon in composite volume is achieved. Moreover, typical problems for composites reinforced by particles like sedimentation, agglomeration and clustering of particles are avoided. Tribological characteristics during friction in air versus cast iron as a counterpart were made. Produced composites with glassy carbon layer are characterised by friction coefficient between 0.08-0.20, thus meeting the typical conditions for solid lubricants.

  1. Carbon-coated nanoparticle superlattices for energy applications

    Science.gov (United States)

    Li, Jun; Yiliguma, Affa; Wang, Yifei; Zheng, Gengfeng

    2016-07-01

    Nanoparticle (NP) superlattices represent a unique material architecture for energy conversion and storage. Recent reports on carbon-coated NP superlattices have shown exciting electrochemical properties attributed to their rationally designed compositions and structures, fast electron transport, short diffusion length, and abundant reactive sites via enhanced coupling between close-packed NPs, which are distinctive from their isolated or disordered NP or bulk counterparts. In this minireview, we summarize the recent developments of highly-ordered and interconnected carbon-coated NP superlattices featuring high surface area, tailorable and uniform doping, high conductivity, and structure stability. We then introduce the precisely-engineered NP superlattices by tuning/studying specific aspects, including intermetallic structures, long-range ordering control, and carbon coating methods. In addition, these carbon-coated NP superlattices exhibit promising characteristics in energy-oriented applications, in particular, in the fields of lithium-ion batteries, fuel cells, and electrocatalysis. Finally, the challenges and perspectives are discussed to further explore the carbon-coated NP superlattices for optimized electrochemical performances.

  2. Performance of Polyaniline-coated Short Carbon Fibers in Electromagnetic Shielding Coating

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Combined nitric acid oxidation method and polyaniline (PANI)-coated method were applied to modify the surface properties of short carbon fibers (SCF). The electrical and mechanical properties of acrylic coatings with 50 wt pct PANI-coated carbon fiber were investigated by using scanning electron microscope (SEM), UV-Vis spectrophotometer, four-probe method and the coaxial cable method. The results of the pH measurement and XPS (X-ray photoelectron spectroscopy) patterns showed that the oxygen functional groups, such as -OH and -COOH, were attached on the carbon fiber surfaces after oxidation treatment. The XPS analysis of PANl-coated oxidized SCF (PAOSCF) revealed that PANI may bond on the surface of oxidized SCF with chemical bonds. SEM images and surface roughness analyses showed that PANl-coated layer changed the surface morphology. Compared with SCF/acrylic coating, the surface resistivity of PAOSCF/acrylic coating decreased from17.1 to 5.3 Ω/sq and the shielding efficiency (SE) value increased from 1.54 to 23.3 dB.

  3. Tensile Properties of Polyimide Composites Incorporating Carbon Nanotubes-Grafted and Polyimide-Coated Carbon Fibers

    Science.gov (United States)

    Naito, Kimiyoshi

    2014-09-01

    The tensile properties and fracture behavior of polyimide composite bundles incorporating carbon nanotubes-grafted (CNT-grafted) and polyimide-coated (PI-coated) high-tensile-strength polyacrylonitrile (PAN)-based (T1000GB), and high-modulus pitch-based (K13D) carbon fibers were investigated. The CNT were grown on the surface of the carbon fibers by chemical vapor deposition. The pyromellitic dianhydride/4,4'-oxydianiline PI nanolayer coating was deposited on the surface of the carbon fiber by high-temperature vapor deposition polymerization. The results clearly demonstrate that CNT grafting and PI coating were effective for improving the Weibull modulus of T1000GB PAN-based and K13D pitch-based carbon fiber bundle composites. In addition, the average tensile strength of the PI-coated T1000GB carbon fiber bundle composites was also higher than that of the as-received carbon fiber bundle composites, while the average tensile strength of the CNT-grafted T1000GB, K13D, and the PI-coated K13D carbon fiber bundle composites was similar to that of the as-received carbon fiber bundle composites.

  4. The Effect of Residual Stress on the Wear Properties of Dlc Coatings

    Science.gov (United States)

    Jang, Young-Jun; Kim, Seock-Sam; Rha, Jong-Joo

    Multi-layer diamond-like carbon (DLC) coating, 150 and 220 nm thick were deposited by negative pulsed d.c. bias induced with magnetron sputtering. The objective of this research is to resolve a wear resistance in terms of DLC coating residual stress and mechanical properties. The bias was controlled from - 200 to 0 V during 10 second with point contacting controller. The surface structure was continuously fabricating to soft and hard-layer during deposition. It was shown that the compressive residual stress and hardness were 0.09, 18 GPa under multi-layer coating condition. The as-deposited DLC coating has a relatively higher wear resistance than unmodified DLC under nanoabrasive wear. It also showed that multi-layer DLC coating had no wear until 400 nN. The decreased residual stress and increased film hardness in the multi-layer coating gave a rise to increase wear resistance.

  5. Smart Cellulose Fibers Coated with Carbon Nanotube Networks

    OpenAIRE

    Haisong Qi; Jianwen Liu; Edith Mäder

    2014-01-01

    Smart multi-walled carbon nanotube (MWCNT)-coated cellulose fibers with a unique sensing ability were manufactured by a simple dip coating process. The formation of electrically-conducting MWCNT networks on cellulose mono- and multi-filament fiber surfaces was confirmed by electrical resistance measurements and visualized by scanning electron microscopy. The interaction between MWCNT networks and cellulose fiber was investigated by Raman spectroscopy. The piezoresistivity of these fibers fo...

  6. Diamond-Coated Carbon Nanotubes for Efficient Field Emission

    Science.gov (United States)

    Dimitrijevic, Stevan; Withers, James C.

    2005-01-01

    Field-emission cathodes containing arrays of carbon nanotubes coated with diamond or diamondlike carbon (DLC) are undergoing development. Multiwalled carbon nanotubes have been shown to perform well as electron field emitters. The idea underlying the present development is that by coating carbon nanotubes with wideband- gap materials like diamond or DLC, one could reduce effective work functions, thereby reducing threshold electric-field levels for field emission of electrons and, hence, improving cathode performance. To demonstrate feasibility, experimental cathodes were fabricated by (1) covering metal bases with carbon nanotubes bound to the bases by an electrically conductive binder and (2) coating the nanotubes, variously, with diamond or DLC by plasma-assisted chemical vapor deposition. In tests, the threshold electric-field levels for emission of electrons were reduced by as much as 40 percent, relative to those of uncoated- nanotube cathodes. Coating with diamond or DLC could also make field emission-cathodes operate more stably by helping to prevent evaporation of carbon from nanotubes in the event of overheating of the cathodes. Cathodes of this type are expected to be useful principally as electron sources for cathode-ray tubes and flat-panel displays.

  7. Mechanical and Tribological Properties of Carbon-Based Graded Coatings

    Directory of Open Access Journals (Sweden)

    M. Kot

    2016-01-01

    Full Text Available The paper presents research on coatings with advanced architecture, composed of a Cr/Cr2N ceramic/metal multilayer and graded carbon layers with varying properties from Cr/a-C:H to a-C:N. The microstructure of the coatings was analysed using transmission electron microscopy and Energy Dispersive Spectroscopy, the mechanical properties were tested by nanoindentation, spherical indentation, and scratch testing, and tribological tests were also conducted. The proper selection of subsequent layers in graded coatings allowed high hardness and fracture resistance to be obtained as well as good adhesion to multilayers. Moreover, these coatings have higher wear resistance than single coatings and a friction coefficient equal to 0.25.

  8. Al slurry coatings for molten carbonate fuel cells separator plates

    Energy Technology Data Exchange (ETDEWEB)

    Agueero, A.; Garcia, M.C.; Muelas, R.; Sanchez, A. [Instituto Nacional de Tecnica Aerospacial, Madrid (Spain); Perez, F.J.; Duday, D.; Hierro, M.P.; Gomez, C. [Universidad Complutense de Madrid (Spain). Dept. de Ciencia de los Materiales

    2001-07-01

    The corrosion behaviour of Al slurry coated AISI 310 stainless steel, with and without diffusion heat treatment, was investigated as a wet seal material for molten carbonate fuel cell (MCFC) at 650 C. The results were compared with IVD Al coated AISI 310. Characterization of the samples before and after exposure to the eutectic 62 mol% Li{sub 2}CO{sub 3}-38 mol% K{sub 2}CO{sub 3} mixture at 650 C for 1000 h by SEM-EDS and XRD was carried out. The presence of LiAlO{sub 2} on the coated samples was confirmed by XRD. The slurry Al-coated stainless steels performed at least as well as the IVD Al coating. (orig.)

  9. Applications of thin carbon coatings and films in injection molding

    Science.gov (United States)

    Cabrera, Eusebio Duarte

    In this research, the technical feasibility of two novel applications of thin carbon coatings is demonstrated. The first application consists of using thin carbon coatings on molds for molding ultra-thin plastic parts (coated nanoparticle thin films or nanopapers to create a conductive top layer. During this research, the technical feasibility of a new approach was proven which provides injection molding of ultra-thin parts at lower pressures, without the need of fast heating/fast cooling or other expensive mold modification. An in-house developed procedure by other members of our group, was employed for coating the mold surface using chemical vapor deposition (CVD) resulting in a graphene coating with carbide bonding to the mold surface. The coating resulted in a significant decrease of surface friction and consequently easiness of flow when compared to their uncoated counterparts. Thermoplastic polymers and their composites are a very attractive alternative but are hindered by the non-conductive nature of polymers. There are two general approaches used to date to achieve EMI shielding for plastic products. One is to spray a conductive metal coating onto the plastic surface forming a layer that must maintain its shielding effectiveness (SE), and its adhesion to the plastic throughout the expected life of the product. However, metal coatings add undesirable weight and tend to corrode over time. Furthermore, scratching the coating may create shielding failure; therefore, a protective topcoat may be required. The other approach is to use polymer composites filled with conductive fillers such as carbon black (CB), carbon nanofiber (CNF), and carbon nanotube (CNT). While conductive fillers may increase the electrical conductivity of polymer composites, the loading of such fillers often cannot reach a high level (coated nanoparticle thin films or nanopapers to create a conductive top layer. For many years, in-mold coating (IMC) has been commercially applied to Sheet

  10. A new carbon structure in annealed film coatings of the carbon-lead system

    Science.gov (United States)

    Volodin, V. N.; Tuleushev, Yu. Zh.; Zhakanbaev, E. A.; Tsai, K. V.; Rofman, O. V.

    2017-01-01

    Carbon-lead solid solutions coexisting with amorphous carbon have been obtained for the first time in a film coating deposited by ion-plasma sputtering. During subsequent vacuum annealing of carbon-lead films containing more than 68.5 at % Pb, this element almost completely evaporates to leave an amorphous carbon coating on a substrate. During annealing at 1100°C, this amorphous carbon crystallizes into a new hexagonal lattice with unit cell parameters a = 0.7603 nm and c = 0.8168 nm. Characteristic X-ray diffraction data for the identification of this phase are determined.

  11. New solar selective coating based on carbon nanotubes

    Science.gov (United States)

    Abendroth, Thomas; Leupolt, Beate; Mäder, Gerrit; Härtel, Paul; Grählert, Wulf; Althues, Holger; Kaskel, Stefan; Beyer, Eckhard

    2016-05-01

    Carbon nanotubes (CNTs) can be applied to assemble a new type of solar selective coating system for solar thermal applications. In this work the predominant absorption processes occurring by interaction with π-plasmon and Van Hove singularities (VHS) were investigated by UV-VIS-NIR spectroscopy and ellipsometry. Not only optical properties for as deposited SWCNT thin films itself, but also the potential for systematic tailoring will be presented. Besides low cost technologies required, the adjustability of optical properties, as well as their thermal stability render CNT based solar selective coatings as promising alternative to commercially available coating systems.

  12. Hard, infrared black coating with very low outgassing

    Energy Technology Data Exchange (ETDEWEB)

    Kuzmenko, P J; Behne, D M; Casserly, T; Boardman, W; Upadhyaya, D; Boinapally, K; Gupta, M; Cao, Y

    2008-06-02

    Infrared astronomical instruments require absorptive coatings on internal surfaces to trap scattered and stray photons. This is typically accomplished with any one of a number of black paints. Although inexpensive and simple to apply, paint has several disadvantages. Painted surfaces can be fragile, prone to shedding particles, and difficult to clean. Most importantly, the vacuum performance is poor. Recently a plasma enhanced chemical vapor deposition (PECVD) process was developed to apply thick (30 {micro}m) diamond-like carbon (DLC) based protective coatings to the interior of oil pipelines. These DLC coatings show much promise as an infrared black for an ultra high vacuum environment. The coatings are very robust with excellent cryogenic adhesion. Their total infrared reflectivity of < 10% at normal incidence approaches that of black paints. We measured outgas rates of <10{sup -12} Torr liter/sec cm{sup 2}, comparable to bare stainless steel.

  13. CCN activation of pure and coated carbon black particles.

    Science.gov (United States)

    Dusek, U; Reischl, G P; Hitzenberger, R

    2006-02-15

    The CCN (cloud condensation nucleus) activation of pure and coated carbon black particles was investigated using the University of Vienna cloud condensation nuclei counter (Giebl, H.; Berner, A.; Reischl, G.; Puxbaum, H.; Kasper-Giebl, A.; Hitzenberger, R. J. Aerosol Sci. 2002, 33, 1623-1634). The particles were produced by nebulizing an aqueous suspension of carbon black in a Collison atomizer. The activation of pure carbon black particles was found to require higher supersaturations than predicted by calculations representing the particles as insoluble, wettable spheres with mobility equivalent diameter. To test whether this effect is an artifact due to heating of the light-absorbing carbon black particles in the laser beam, experiments at different laser powers were conducted. No systematic dependence of the activation of pure carbon black particles on laser power was observed. The observations could be modeled using spherical particles and an effective contact angle of 4-6 degrees of water at their surface. The addition of a small amount of NaCl to the carbon black particles (by adding 5% by mass NaCl to the carbon black suspension) greatly enhanced their CCN efficiency. The measured CCN efficiencies were consistent with Kohler theory for particles consisting of insoluble and hygroscopic material. However, coating the carbon black particles with hexadecanol (a typical film-forming compound with one hydrophobic and one hydrophilic end) efficiently suppressed the CCN activation of the carbon black particles.

  14. Glassy carbon coated graphite for nuclear applications

    Energy Technology Data Exchange (ETDEWEB)

    Delpeux, S.; Cacciaguerra, T.; Duclaux, L. [Orleans Univ., CRMD, CNRS, 45 (France)

    2005-07-01

    Taking into account the problems caused by the treatment of nuclear wastes, the molten salts breeder reactors are expected to a great development. They use a molten fluorinated salt (mixture of LiF, BeF{sub 2}, ThF{sub 4}, and UF{sub 4}) as fuel and coolant. The reactor core, made of graphite, is used as a neutrons moderator. Despite of its compatibility with nuclear environment, it appears crucial to improve the stability and inertness of graphite against the diffusion of chemicals species leading to its corrosion. One way is to cover the graphite surface by a protective impermeable deposit made of glassy carbon obtained by the pyrolysis of phenolic resin [1,2] or polyvinyl chloride [3] precursors. The main difficulty in the synthesis of glassy carbon is to create exclusively, in the primary pyrolysis product, a micro-porosity of about twenty Angstroms which closes later at higher temperature. Therefore, the evacuation of the volatile products occurring mainly between 330 and 600 C, must progress slowly to avoid the material to crack. In this study, the optimal parameters for the synthesis of glassy carbon as well as glassy carbon deposits on nuclear-type graphite pieces are discussed. Both thermal treatment of phenolic and PVC resins have been performed. The structure and micro-texture of glassy carbon have been investigated by X-ray diffraction, scanning and transmission electron microscopies and helium pycno-metry. Glassy carbon samples (obtained at 1200 C) show densities ranging from 1.3 to 1.55 g/cm{sup 3} and closed pores with nano-metric size ({approx} 5 to 10 nm) appear clearly on the TEM micrographs. Then, a thermal treatment to 2700 C leads to the shrinkage of the entangled graphene ribbons (Fig 1), in good agreement with the proposed texture model for glassy carbon (Fig 2) [4]. Glassy carbon deposits on nuclear graphite have been developed by an impregnation method. The uniformity of the deposit depends clearly on the surface texture and the chemistry

  15. Glassy carbon coated graphite for nuclear applications

    Energy Technology Data Exchange (ETDEWEB)

    Delpeux S; Cacciaguerra T; Duclaux L [CRMD, CNRS-University of Orleans, 1B rue de la Ferollerie 45071 Orleans Cedex 2, (France)

    2005-07-01

    Taking into account the problems caused by the treatment of nuclear wastes, the molten salts breeder reactors are expected to a great development. They use a molten fluorinated salt (mixture of LiF, BeF{sub 2}, ThF{sub 4}, and UF{sub 4}) as fuel and coolant. The reactor core, made of graphite, is used as a neutrons moderator. Despite of its compatibility with nuclear environment, it appears crucial to improve the stability and inertness of graphite against the diffusion of chemicals species leading to its corrosion. One way is to cover the graphite surface by a protective impermeable deposit made of glassy carbon obtained by the pyrolysis of phenolic resin or polyvinyl chloride precursors. The main difficulty in the synthesis of glassy carbon is to create exclusively, in the primary pyrolysis product, a micro-porosity of about twenty Angstroms which closes later at higher temperature. Therefore, the evacuation of the volatile products occurring mainly between 330 and 600 C, must progress slowly to avoid the material to crack. In this study, the optimal parameters for the synthesis of glassy carbon as well as glassy carbon deposits on nuclear-type graphite pieces are discussed. Both thermal treatment of phenolic and PVC resins have been performed. The structure and micro-texture of glassy carbon have been investigated by X-ray diffraction, scanning and transmission electron microscopies and helium pycno-metry. Glassy carbon samples (obtained at 1200 C) show densities ranging from 1.3 to 1.55 g/cm{sup 3} and closed pores with nano-metric size ({approx} 5 to 10 nm) appear clearly on the TEM micrographs. Then, a thermal treatment to 2700 C leads to the shrinkage of the entangled graphene ribbons, in good agreement with the proposed texture model for glassy carbon. Glassy carbon deposits on nuclear graphite have been developed by an impregnation method. The uniformity of the deposit depends clearly on the surface texture and the chemistry of the graphite substrate. The

  16. Biocompatible Silver-containing a-C:H and a-C coatings: AComparative Study

    Energy Technology Data Exchange (ETDEWEB)

    Endrino, Jose Luis; Allen, Matthew; Escobar Galindo, Ramon; Zhang, Hanshen; Anders, Andre; Albella, Jose Maria

    2007-04-01

    Hydrogenated diamond-like-carbon (a-C:H) and hydrogen-free amorphous carbon (a-C) coatings are known to be biocompatible and have good chemical inertness. For this reason, both of these materials are strong candidates to be used as a matrix that embeds metallic elements with antimicrobial effect. In this comparative study, we have incorporated silver into diamond-like carbon (DLC) coatings by plasma based ion implantation and deposition (PBII&D) using methane (CH4) plasma and simultaneously depositing Ag from a pulsed cathodic arc source. In addition, we have grown amorphous carbon - silver composite coatings using a dual-cathode pulsed filtered cathodic-arc (FCA) source. The silver atomic content of the deposited samples was analyzed using glow discharge optical spectroscopy (GDOES). In both cases, the arc pulse frequency of the silver cathode was adjusted in order to obtain samples with approximately 5 at.% of Ag. Surface hardness of the deposited films was analyzed using the nanoindentation technique. Cell viability for both a-C:H/Ag and a-C:/Ag samples deposited on 24-well tissue culture plates has been evaluated.

  17. Coating of carbon fibers -- The strength of the fibers

    Energy Technology Data Exchange (ETDEWEB)

    Helmer, T. [Alusingen GmbH, Singen (Germany); Peterlik, H.; Kromp, K. [Univ. Wien, Vienna (Austria). Inst. fuer Festkoerperphysik

    1995-01-01

    The 6k carbon fiber Torayca T800H was coated with pyrolytic carbon by a CVD process. Fiber bundles were tested and evaluated. By this procedure, the whole distribution of the failure probability with respect to the fiber strength is obtained in a single experiment. The 50% strength of the fiber bundle, i.e., the strength at which 50% of the fibers in the bundle are broken, is inversely proportional to the square root of the thickness of the coating. By relating the strength to the defect size according to linear-elastic fracture mechanics (LEFM), the probability density function of the defects was derived. It is Weibull-shaped for the uncoated fiber and shows an increasing bimodal shape for the increasing coating thicknesses.

  18. Characterization of diamond-like nanocomposite thin films grown by plasma enhanced chemical vapor deposition

    Science.gov (United States)

    Santra, T. S.; Liu, C. H.; Bhattacharyya, T. K.; Patel, P.; Barik, T. K.

    2010-06-01

    Diamond-like nanocomposite (DLN) thin films, comprising the networks of a-C:H and a-Si:O were deposited on pyrex glass or silicon substrate using gas precursors (e.g., hexamethyldisilane, hexamethyldisiloxane, hexamethyldisilazane, or their different combinations) mixed with argon gas, by plasma enhanced chemical vapor deposition technique. Surface morphology of DLN films was analyzed by atomic force microscopy. High-resolution transmission electron microscopic result shows that the films contain nanoparticles within the amorphous structure. Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and x-ray photoelectron spectroscopy (XPS) were used to determine the structural change within the DLN films. The hardness and friction coefficient of the films were measured by nanoindentation and scratch test techniques, respectively. FTIR and XPS studies show the presence of CC, CH, SiC, and SiH bonds in the a-C:H and a-Si:O networks. Using Raman spectroscopy, we also found that the hardness of the DLN films varies with the intensity ratio ID/IG. Finally, we observed that the DLN films has a better performance compared to DLC, when it comes to properties like high hardness, high modulus of elasticity, low surface roughness and low friction coefficient. These characteristics are the critical components in microelectromechanical systems (MEMS) and emerging nanoelectromechanical systems (NEMS).

  19. Mechanical Properties and Atomic Explanation of Plastic Deformation for Diamond-Like BC2

    Directory of Open Access Journals (Sweden)

    Baobing Zheng

    2016-06-01

    Full Text Available Motivated by a recently predicted structure of diamond-like BC2 with a high claimed hardness of 56 GPa (J. Phys. Chem. C 2010, 114, 22688–22690, we focus on whether this tetragonal BC2 (t-BC2 is superhard or not in spite of such an ultrahigh theoretical hardness. The mechanical properties of t-BC2 were thus further extended by using the first principles in the framework of density functional theory. Our results suggest that the Young’s and shear moduli of t-BC2 exhibit a high degree of anisotropy. For the weakest shear direction, t-BC2 undergoes an electronic instability and structural collapse upon a shear strain of about 0.11, with its theoretically ideal strength of only 36.2 GPa. Specifically, the plastic deformation under shear strain along the (110[001] direction can be attributed to the breaking of d1 B–C bonds.

  20. THE MACHINING OF HARDENED CARBON STEELS BY COATED CUTTING TOOLS

    Directory of Open Access Journals (Sweden)

    Yusuf ŞAHİN

    2001-02-01

    Full Text Available The investigation of machining AISI 1050 carbon steels hardened to the 60 HRC hardness was carried out to determine the tool life and wear behaviour of the various cutting tools under different conditions. These experiments were conducted at using coated ceramic cutting tools and carbide cutting tools. The experimental results showed that the coated ceramic tools exhibited better performance than those of the coated carbide tools when machining the hardened steels. Moreover, wear behaviour of cutting tools were investigated in a scanning electron microscope. Electron microscopic examination also indicated that flank wear, thermal cracks on the tool nose combined with the nose deformation on the tools were responsible for the wear behaviour of the ceramic tools. For the carbide tools, however, removal of coated material from the substrate tool and combined with the crater wear were effective for the machining the hardened steel.

  1. Thermal Stability of Zirconia-coated Multiwalled Carbon Nanotubes

    Directory of Open Access Journals (Sweden)

    R. Manivannan

    2010-04-01

    Full Text Available Sol-gel method has been used to coat multiwalled carbon nanotubes (MWCNTs with zirconia at room temperature and the coated tubes were sintered at high temperature. The samples were characterised by Raman spectroscopy, x-ray diffraction, environmental scanning electron microscope, transmission electron microscopy, and energy-dispersive x-ray analyses. The performance of the coated-MWCNTs was investigated as a function of temperature. The TGA studies indicated that sintering of coated-MWCNTs has improved its oxidation resistance and this improvement is related to the proper selection of sintering temperature.Defence Science Journal, 2010, 60(3, pp.337-342, DOI:http://dx.doi.org/10.14429/dsj.60.362

  2. Compound Hertzian Chain Model for Copper-Carbon Nanocomposites' Absorption Spectrum

    CERN Document Server

    Kokabi, Alireza; Saeedi, Saman; Moftakharzadeh, Ali; Vesaghi, Mohammad Ali; Fardmanesh, Mehdi

    2011-01-01

    The infrared range optical absorption mechanism of Carbon-Copper composite thin layer coated on the Diamond-Like Carbon (DLC) buffer layer has been investigated. By consideration of weak interactions between copper nanoparticles in their network, optical absorption is modeled using their coherent dipole behavior induced by the electromagnetic radiation. The copper nanoparticles in the bulk of carbon are assumed as a chain of plasmonic dipoles, which have coupling resonance. Considering nearest neighbor interactions for this metallic nanoparticles, surface plasmon resonance frequency ({\\omega}\

  3. 涂层钻头钻削碳纤维复合材料的轴向力研究%Study of drilling thrust force of coated drills in drilling the carbon fiber reinforced plastic

    Institute of Scientific and Technical Information of China (English)

    魏良耀; 程寓

    2013-01-01

    不同刀具材料对碳纤维复合材料的加工有较大的影响.通过合理选择钻头的基体材料和涂层材料,基于正交试验综合分析不同涂层材料、主轴转速及进给速度对钻削轴向力的影响.试验结果表明,涂层材料对轴向力的影响最大,涂层钻头的钻削轴向力比无涂层YG6X钻头小很多,类金刚石涂层(DLC)钻头最小.TiAIN和TiCN涂层钻头都有不同程度的磨损,DLC钻头的耐磨性和加工质量都远远高于其他涂层.%Different tool materials have a greater impact on the processing of carbon fiber reinforced plastic. Through the reasonable choice of substrate material and coating materials of the drill, based on the orthogonal experiment and comprehensive analysis of the coating materials, different spindle speeds and feed drilling speeds on the effect of the thrust force. The results show that coating material is the biggest influencing factor for drilling thrust force, compared to the uncoated drill bits, the thrust force of the coating drill is much smaller, and the least is DLC drill. TiAIN and TiCN coating drill both have different degrees of wear. The wear resistance and processing quality of the diamond-like-coating ( DLC) drill are far higher than other coatings.

  4. W-Mo-Si/SiC Oxidation Protective Coating for Carbon/Carbon Composites

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    A W-Mo-Si/SiC double-layer oxidation protective coating for carbon/carbon (C/C) composites was prepared by a two-step pack cementation technique. XRD (X-ray diffraction) and SEM (scanning electron microscopy)results show that the coating obtained by the first step pack cementation was a thin inner buffer layer of SiC with some cracks and pores, and a new phase of (WxMo1-x)Si2 appeared after the second step pack cementation. Oxidation test shows that, after oxidation in air at 1773 K for 175 h and thermal cycling between 1773 K and room temperature for 18 times, the weight loss of the W-Mo-Si/SiC coated C/C composites was only 2.06%. The oxidation protective failure of the W-Mo-Si/SiC coating was attributed to the formation of some penetrable cracks in the coating.

  5. Preparation of Nickel-Copper Bilayers Coated on Single-Walled Carbon Nanotubes

    Directory of Open Access Journals (Sweden)

    Zhong Zheng

    2015-01-01

    Full Text Available Due to oxidizability of copper coating on carbon nanotubes, the interfacial bond strength between copper coating and its matrix is weak, which leads to the reduction of the macroscopic properties of copper matrix composite. The electroless coating technics was applied to prepare nickel-copper bilayers coated on single-walled carbon nanotubes. The coated single-walled carbon nanotubes were characterized through transmission electron microscope spectroscopy, field-emission electron microscope spectroscopy, X-ray diffractometry, and thermogravimetric analysis. The results demonstrated that the nickel-copper bilayers coated on single-walled carbon nanotubes possessed higher purity of unoxidized copper fine-grains than copper monolayers.

  6. Fabrication of barium/strontium carbonate coated amorphous carbon nanotubes as an improved field emitter

    Science.gov (United States)

    Maity, S.; Jha, A.; Das, N. S.; Chattopadhyay, K. K.

    2013-02-01

    Amorphous carbon nanotubes (aCNTs) were synthesized by a chemical reaction between ferrocene and ammonium chloride at a temperature ˜250 ∘C in an air furnace. As-synthesized aCNTs were coated with the barium/strontium carbonate through a simple chemical process. The coating of barium/strontium carbonate was confirmed by a high resolution transmission electron microscopy, X-ray diffraction, and Fourier transformed infrared spectroscopy. Morphology of the as-prepared samples was studied by field emission scanning electron microscopy. Thermal gravimetric analysis showed that barium/strontium carbonate coated aCNTs are more stable than the pristine aCNTs. As-prepared barium/strontium carbonate coated aCNTs showed significantly improved field emission properties with a turn-on field as low as 2.5 V/μm. The variation of field emission characteristics of the barium/strontium carbonate coated aCNTs with interelectrode distances was also studied.

  7. Effect of carbon on microstructure of CrAlCχN1-χ coatings by hybrid coating system

    Institute of Scientific and Technical Information of China (English)

    Sung-Kyu AHN; Se-Hun KWON; Kwang-Ho KIM

    2011-01-01

    A systematic investigation of the microstructure of CrAICχN1-χ coatings as a function of carbon contents was conducted.Quaternary CrAICχN1-χ coatings were deposited on Si wafers by a hybrid coating system combining an arc-ion plating technique and a DC reactive magnetron sputtering technique using Cr and Al targets in the Ar/N2/CH4 gaseous mixture. The effect of carbon content on microstructure of CrAICχN1-χ coatings was investigated with instrumental analyses of X-ray diffraction, X-ray photoelectron, and high-resolution transmission electron microscopy. The results show that the carbon content of CrAICχN1-χ coatings linearly increases with increasing CH4/(CH4/N2) gas flow rate ratio. The surface roughness of the CrAICχN 1-χ coating layer decreases with the increase of carbon content.

  8. Copper-based diamond-like ternary semiconductors for thermoelectric applications

    Science.gov (United States)

    Skoug, Eric John

    Heightened global concern over greenhouse gas emissions has led to an increased demand for clean energy conversion technologies. Thermoelectric materials convert directly between thermal and electrical energy and can increase the efficiency of existing processes via waste heat recovery and solid-state climate control applications. The conversion efficiency of available thermoelectric materials and the devices comprised of them is unfortunately quite low, and thus new materials must be developed in order for thermoelectrics to keep pace with competing technologies. One approach to increasing the conversion efficiency of a given material is to decrease its lattice thermal conductivity, which has traditionally been accomplished by introducing phonon scattering centers into the material. These scattering centers also tend to degrade electronic transport in the material, thereby minimizing the overall effect on the thermoelectric performance. The purpose of this work is to develop materials with inherently low lattice thermal conductivity such that no extrinsic modifications are required. A novel approach in which complex ternary semiconductors are derived from well-known binary or elemental semiconductors is employed to identify candidate materials. Ternary diamond-like compounds, namely Cu2SnSe 3 and Cu3SbSe4, are synthesized, characterized, and optimized for thermoelectric applications. It is found that sample-to-sample variations in hole concentration limits the plausibility of Cu2SnSe3 as a thermoelectric material. Cu3SbSe 4 is found to be a promising material that can achieve thermoelectric performance comparable to state-of-the-art materials when optimized. This work uncovers anomalous thermal conductivity in several Cu-Sb-Se ternary compounds, which is used to develop a set of guidelines relating crystal structure to inherently low lattice thermal conductivity.

  9. Delithiation kinetics study of carbon coated and carbon free LiFePO4

    Science.gov (United States)

    Lepage, D.; Sobh, F.; Kuss, C.; Liang, G.; Schougaard, S. B.

    2014-06-01

    A chemical oxidation method was employed to measure the kinetics of lithium release from LiFePO4 during oxidation. Similar to potential step measurements, the chemical method simplifies quantification compared to the common electrochemical techniques (PITT, GITT etc.). It was found that the overall release of lithium fits one dimensional diffusion kinetics, however, it is also shown that the mechanism must be more complex as the derived activation energy led to an unusually low attack rate of ∼108 Hz. A comparison of carbon coated/carbon free LiFePO4 samples indicated that the carbon coating has only a marginal effect on the delithiation kinetics.

  10. Durable superhydrophobic carbon soot coatings for sensor applications

    Science.gov (United States)

    Esmeryan, K. D.; Radeva, E. I.; Avramov, I. D.

    2016-01-01

    A novel approach for the fabrication of durable superhydrophobic (SH) carbon soot coatings used in quartz crystal microbalance (QCM) based gas or liquid sensors is reported. The method uses modification of the carbon soot through polymerization of hexamethyldisiloxane (HMDSO) by means of glow discharge RF plasma. The surface characterization shows a fractal-like network of carbon nanoparticles with diameter of ~50 nm. These particles form islands and cavities in the nanometer range, between which the plasma polymerized hexamethyldisiloxane (PPHMDSO) embeds and binds to the carbon chains and QCM surface. Such modified surface structure retains the hydrophobic nature of the soot and enhances its robustness upon water droplet interactions. Moreover, it significantly reduces the insertion loss and dynamic resistance of the QCM compared to the commonly used carbon soot/epoxy resin approach. Furthermore, the PPHMDSO/carbon soot coating demonstrates durability and no aging after more than 40 probing cycles in water based liquid environments. In addition, the surface layer keeps its superhydrophobicity even upon thermal annealing up to 540 °C. These experiments reveal an opportunity for the development of soot based SH QCMs with improved electrical characteristics, as required for high-resolution gas or liquid measurements.

  11. Glass Difractive Optical Elements (DOEs with complex modulation DLC thin film coated

    Directory of Open Access Journals (Sweden)

    Marina Sparvoli

    2008-09-01

    Full Text Available We developed a complex (amplitude and phase modulation Diffractive Optical Element (DOE with four phase levels, which is based in a glass substrate coated with DLC (Diamond Like Carbon thin film as the amplitude modulator. The DLC film was deposited by magnetron reactive sputtering with a graphite target and methane gas in an optical glass surface. The glass and DLC film roughness were measured using non destructive methods, such as a high step meter, Atomic Force Microscopy and Diffuse Reflectance. Other properties, such as refractive index of both materials were measured. The DOEs were tested using 632.8 nm HeNe laser.

  12. Design of DLC/Titanium Alloy Bio-Functionally Gradient Coat

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    The material design is used to direct the magnetron cosputtering process. At first, according to the particularity of functionally gradient coat (FGC) the thermal elastic stress analysis for FGC was carried out based on the plane stress hypothesis. It is obtained that the peak value of plane thermal stress within FGC is only determined by the physical properties of materials of FGC and substrate, the composition distribution coefficient only influences the distribution and trend of plane thermal stress. And the plane thermal stress criterion for design of FGC was presented. Then the plane thermal stress of diamond like carbon/titanium alloy FGC was calculated.

  13. Effect of Cationic and Anionic Surfactants on the Application of Calcium Carbonate Nanoparticles in Paper Coating

    CERN Document Server

    Barhoum, Ahmed; Abou-Zaied, Ragab Esmail; Rehan, Mohamed; Dufour, Thierry; Hill, Gavin; Dufresne, Alain

    2016-01-01

    Modification of calcium carbonate particles with surfactant significantly improves the properties of the calcium carbonate coating on paper. Unmodified and CTAB and oleate-modified calcium carbonate nanoparticles were prepared using the wet carbonation technique for paper coating. CTAB (cationic surfactant) and sodium oleate (anionic surfactant) were used to modify the size, morphology, and surface properties of the precipitated nanoparticles. The obtained particles were characterized by XRD, FT-IR spectroscopy, zeta potential measurements, TGA and TEM. Coating colors were formulated from the prepared unmodified and modified calcium carbonates and examined by creating a thin coating layer on reference paper. The effect of calcium carbonate particle size and surface modification on paper properties, such as coating thickness, coating weight, surface roughness, air permeability, brightness, whiteness, opacity, and hydrophobicity, were investigated and compared with GCC calcium carbonate-coated papers. The obtai...

  14. Coating carbon nanotubes with polymer in supercritical carbon dioxide.

    Science.gov (United States)

    Wang, Jiawei; Khlobystov, Andrei N; Wang, Wenxin; Howdle, Steven M; Poliakoff, Martyn

    2006-04-21

    A facile and efficient method has been developed for coating MWNTs with solvent resistant polymer in scCO2, which permits the selective deposition of high molecular weight fluorinated graft poly(methyl vinyl ether-alt-maleic anhydride) polymer onto MWNTs in scCO2 under 100-170 bar at 40 degrees C and forms quasi one-dimensional nanostructures with conducting cores and insulating surfaces.

  15. Method of producing carbon coated nano- and micron-scale particles

    Science.gov (United States)

    Perry, W. Lee; Weigle, John C; Phillips, Jonathan

    2013-12-17

    A method of making carbon-coated nano- or micron-scale particles comprising entraining particles in an aerosol gas, providing a carbon-containing gas, providing a plasma gas, mixing the aerosol gas, the carbon-containing gas, and the plasma gas proximate a torch, bombarding the mixed gases with microwaves, and collecting resulting carbon-coated nano- or micron-scale particles.

  16. Carbon Coatings with Low Secondary Electron Yield

    CERN Document Server

    Taborelli, M; Costa Pinto, P; Calatroni, S; Chiggiato, P; Edwards, P; Letant-Delrieux, D; Lucas, S; Neupert, H; Vollenberg, W; Yin-Vallgren, C

    2013-01-01

    Carbon thin films for electron cloud mitigation and anti-multipacting applications have been prepared by dc magnetron sputtering in both neon and argon discharge gases and by plasma enhanced chemical vapour deposition (PECVD) using acetylene. The thin films have been characterized using Secondary Electron Yield (SEY) measurements, Scanning Electron Microscopy (SEM), Nuclear Reaction Analysis (NRA) and X-ray Photoelectron Spectroscopy (XPS). For more than 100 carbon thin films prepared by sputtering the average maximum SEY is 0.98+/-0.07 after air transfer. The density of the films is lower than the density of Highly Ordered Pyrolytic Graphite (HOPG), a fact which partially explains their lower SEY. XPS shows that magnetron sputtered samples exhibit mainly sp2 type bonds. The intensity on the high binding energy side of C1s is found to be related to the value of the SEY. Instead the initial surface concentration of oxygen has no influence on the resulting SEY, when it is below 16%. The thin films produced by P...

  17. Effect of carbon coating on scuffing performance in diesel fuels

    Energy Technology Data Exchange (ETDEWEB)

    Ajayi, O. O.; Alzoubi, M. F.; Erdemir, A.; Fenske, G. R.

    2000-06-29

    Low-sulfur and low-aromatic diesel fuels are being introduced in order to reduce various types of emissions in diesel engines to levels in compliance with current and impending US federal regulations. The low lubricity of these fuels, however, poses major reliability and durability problems for fuel injection components that depend on diesel fuel for their lubrication. In the present study, the authors evaluated the scuff resistance of surfaces in regular diesel fuel containing 500 ppm sulfur and in Fischer-Tropsch synthetic diesel fuel containing no sulfur or aromatics. Tests were conducted with the high frequency reciprocating test rig (HFRR) using 52100 steel balls and H-13 tool-steel flats with and without Argonne's special carbon coatings. Test results showed that the sulfur-containing fuels provide about 20% higher scuffing resistance than does fuel without sulfur. Use of the carbon coating on the flat increased scuffing resistance in both regular and synthetic fuels by about ten times, as measured by the contact severity index at scuffing. Scuffing failure in tests conducted with coated surfaces did not occur until the coating had been removed by the two distinct mechanisms of spalling and wear.

  18. Surface modification of commercial tin coatings by carbon ion implantation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, L.J.; Sood, D.K.; Manory, R.R. [Royal Melbourne Inst. of Tech., VIC (Australia)

    1993-12-31

    Commercial TiN coatings of about 2 {mu}m thickness on high speed steel substrates were implanted at room temperature with 95 keV carbon ions at nominal doses between 1 x 10{sup 17} - 8x10{sup 17} ions cm{sup -2}. Carbon ion implantation induced a significant improvement in ultramicrohardness, friction coefficient and wear properties. The surface microhardness increases monotonically by up to 115% until a critical dose is reached. Beyond this dose the hardness decreases, but remains higher than that of unimplanted sample. A lower friction coefficient and a longer transition period towards a steady state condition were obtained by carbon ion implantation. The changes in tribomechanical properties are discussed in terms of radiation damage and possible formation of a second phase rich in carbon. 6 refs., 3 figs.

  19. Carbon-Based Wear Coatings: Properties and Applications

    Science.gov (United States)

    Miyoshi, Kazuhisa

    2003-01-01

    The technical function of numerous engineering systems - such as vehicles, machines, and instruments - depends on the processes of motion and on the surface systems. Many processes in nature and technology depend on the motion and dynamic behavior of solids, liquids, and gases. Smart surface systems are essential because of the recent technological push toward higher speeds, loads, and operating temperatures; longer life; lighter weight and smaller size (including nanotechnology); and harsh environments in mechanical, mechatronic, and biomechanical systems. If proper attention is not given to surface systems, then vehicles, machines, instruments, and other technical systems could have short lives, consume excessive energy, experience breakdowns, result in liabilities, and fail to accomplish their missions. Surface systems strongly affect our national economy and our lifestyles. At the NASA Glenn Research Center, we believe that proper attention to surface systems, especially in education, research, and application, could lead to economic savings of between 1.3 and 1.6 percent of the gross domestic product. Wear coatings and surface systems continue to experience rapid growth as new coating and surface engineering technologies are discovered, more cost-effective coating and surface engineering solutions are developed, and marketers aggressively pursue, uncover, and exploit new applications for engineered surface systems in cutting tools and wear components. Wear coatings and smart surface systems have been used widely in industrial, consumer, automotive, aerospace, and biomedical applications. This presentation expresses the author's views of and insights into smart surface systems in wear coatings. A revolution is taking place in carbon science and technology. Diamond, an allotrope of carbon, joins graphite, fullerenes, and nanotubes as its major pure carbon structures. It has a unique combination of extreme properties: hardness and abrasion resistance; adhesion

  20. Carbon-Based Wear Coatings: Properties and Applications

    Science.gov (United States)

    Miyoshi, Kazuhisa

    2003-01-01

    The technical function of numerous engineering systems - such as vehicles, machines, and instruments - depends on the processes of motion and on the surface systems. Many processes in nature and technology depend on the motion and dynamic behavior of solids, liquids, and gases. Smart surface systems are essential because of the recent technological push toward higher speeds, loads, and operating temperatures; longer life; lighter weight and smaller size (including nanotechnology); and harsh environments in mechanical, mechatronic, and biomechanical systems. If proper attention is not given to surface systems, then vehicles, machines, instruments, and other technical systems could have short lives, consume excessive energy, experience breakdowns, result in liabilities, and fail to accomplish their missions. Surface systems strongly affect our national economy and our lifestyles. At the NASA Glenn Research Center, we believe that proper attention to surface systems, especially in education, research, and application, could lead to economic savings of between 1.3 and 1.6 percent of the gross domestic product. Wear coatings and surface systems continue to experience rapid growth as new coating and surface engineering technologies are discovered, more cost-effective coating and surface engineering solutions are developed, and marketers aggressively pursue, uncover, and exploit new applications for engineered surface systems in cutting tools and wear components. Wear coatings and smart surface systems have been used widely in industrial, consumer, automotive, aerospace, and biomedical applications. This presentation expresses the author's views of and insights into smart surface systems in wear coatings. A revolution is taking place in carbon science and technology. Diamond, an allotrope of carbon, joins graphite, fullerenes, and nanotubes as its major pure carbon structures. It has a unique combination of extreme properties: hardness and abrasion resistance; adhesion

  1. Status and Applications of Diamond and Diamond-Like Materials: An Emerging Technology

    Science.gov (United States)

    1990-04-30

    produced for cutting tools, wire - drawing dies, and well-drilling bits. Polycrystalline pieces up to about 50 mm in diameter, usually on a carbide base... wire - drawing dies, coatings for drills, and bearing surfaces. It may also be possible to employ diamond coatings as impact-protection coatings for...their respective stability regions at HPHT conditions. Tools for cutting, drilling, sawing, and wire drawing have been common in the marketplace since

  2. Coating effects on thermal properties of carbon carbon and carbon silicon carbide composites for space thermal protection systems

    Science.gov (United States)

    Albano, M.; Morles, R. B.; Cioeta, F.; Marchetti, M.

    2014-06-01

    Many are the materials for hot structures, but the most promising one are the carbon based composites nowadays. This is because they have good characteristics with a high stability at high temperatures, preserving their mechanical properties. Unfortunately, carbon reacts rapidly with oxygen and the composites are subjected to oxidation degradation. From this point of view CC has to be modified in order to improve its thermal and oxidative resistance. The most common solutions are the use of silicon carbide into the carbon composites matrix (SiC composites) to make the thermal properties increase and the use of coating on the surface in order to protect the composite from the space plasma effects. Here is presented an experimental study on coating effects on these composites. Thermal properties of coated and non coated materials have been studied and the thermal impact on the matrix and surface degradation is analyzed by a SEM analysis.

  3. Preparation and properties of in-situ growth of carbon nanotubes reinforced hydroxyapatite coating for carbon/carbon composites.

    Science.gov (United States)

    Liu, Shoujie; Li, Hejun; Su, Yangyang; Guo, Qian; Zhang, Leilei

    2017-01-01

    Carbon nanotubes (CNTs) possess excellent mechanical properties for their role playing in reinforcement as imparting strength to brittle hydroxyapatite (HA) bioceramic coating. However, there are few reports relating to the in-situ grown carbon nanotubes reinforced hydroxyapatite (CNTs-HA) coating. Here we demonstrate the potential application in reinforcing biomaterials by an attempt to use in-situ grown of CNTs strengthen HA coating, using a combined method composited of injection chemical vapor deposition (ICVD) and pulsed electrodeposition. The microstructure, phases and chemical compositions of CNTs-HA coatings were characterized by various advanced methods. The scanning electron microscopy (SEM) images indicated that CNTs-HA coatings avoided the inhomogeneous dispersion of CNTs inside HA coating. The result show that the interfacial shear strength between CNTs-HA coating and the C/C composite matrix reaches to 12.86±1.43MPa. Potenitodynamic polarization and electrochemical impedance spectroscopy (EIS) studies show that the content of CNTs affects the corrosion resistance of CNTs-HA coating. Cell culturing and simulated body fluid test elicit the biocompatibility with living cells and bioactivity of CNTs-HA coatings, respectively.

  4. Fabrication of hard-coated optical absorbers with microstructured surfaces using etched ion tracks: Toward broadband ultra-low reflectance

    Energy Technology Data Exchange (ETDEWEB)

    Amemiya, Kuniaki, E-mail: k.amemiya@aist.go.jp [National Metrology Institute of Japan (NMIJ), National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8563 (Japan); Koshikawa, Hiroshi; Yamaki, Tetsuya; Maekawa, Yasunari [Quantum Beam Science Center, Japan Atomic Energy Agency (JAEA), 1233 Watanuki, Takasaki, Gunma 370-1292 (Japan); Shitomi, Hiroshi; Numata, Takayuki; Kinoshita, Kenichi; Tanabe, Minoru; Fukuda, Daiji [National Metrology Institute of Japan (NMIJ), National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8563 (Japan)

    2015-08-01

    Highlights: • A hard-coated optical absorber with microstructured surface was fabricated. • Etched ion tracks coated with diamond-like carbon were used. • The reflectance was below 2% for wavelengths in the 400–1400 nm range. • Fabricated optical absorber exhibited temporal durability and mechanical stability. • Further improvement of the design and process will yield reflectance of ∼0.1%. - Abstract: Broadband low reflectance materials have various applications in the field of optical energy management; however, materials with ultra-low reflectance (below 0.1%) have been considered as mechanically delicate. We have developed a novel hard-surface optical absorber with microstructured, diamond-like carbon coated ion tracks on CR-39 plastic substrate. The spectral reflectance of the first prototype was below 2% for wavelengths ranging from 400 nm to 1400 nm; moreover, the optical absorber had mechanically hard surface and exhibited temporal durability. Choosing the appropriate design of the surface structure and coating layer is likely to reduce the reflectance to the order of 0.1%. This technique yields easy-to-handle broadband ultra-low reflectance absorbers.

  5. Beam Tests of Beampipe Coatings for Electron Cloud Mitigation in Fermilab Main Injector

    CERN Document Server

    Backfish, Michael; Tan, Cheng Yang; Zwaska, Robert

    2015-01-01

    Electron cloud beam instabilities are an important consideration in virtually all high-energy particle accelerators and could pose a formidable challenge to forthcoming high-intensity accelerator upgrades. Dedicated tests have shown beampipe coatings dramatically reduce the density of electron cloud in particle accelerators. In this work, we evaluate the performance of titanium nitride, amorphous carbon, and diamond-like carbon as beampipe coatings for the mitigation of electron cloud in the Fermilab Main Injector. Altogether our tests represent 2700 ampere-hours of proton operation spanning five years. Three electron cloud detectors, retarding field analyzers, are installed in a straight section and allow a direct comparison between the electron flux in the coated and uncoated stainless steel beampipe. We characterize the electron flux as a function of intensity up to a maximum of 50 trillion protons per cycle. Each beampipe material conditions in response to electron bombardment from the electron cloud and ...

  6. Tribological performance of DLC coatings on UHMWPE

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Nogues, V; Medel, F J; Mariscal, M D; Endrino, J L; Krzanowski, J; Yubero, F; Puertolas, J A, E-mail: enav@unizar.es

    2010-11-01

    Diamond like carbon (DLC) coatings were deposited by several methods (ion beam assisted evaporation, magnetron sputtering, filter cathodic arc, and plasma enhanced chemical vapor deposition) onto medical grade ultra-high-molecular weight polyethylene (UHMWPE) discs. The chemical characteristics and mechanical properties of the deposited DLC coatings were studied by Raman spectroscopy and nanoindentation, respectively. In addition, a set of tribological tests was conducted at human body temperature and under bovine serum lubrication against alumina balls. After testing, wear tracks were both visually inspected and documented using confocal microscopy. Visual inspection of the wear tracks confirmed that the DLC coatings were completely removed in all cases, the only exception being the DLC coating prepared by magnetron sputtering with thickness about 0.5 microns. Although this type of DLC coating exhibited the highest friction coefficient, and therefore it suggested a somewhat lower resistance to abrasive/adhesive wear conditions, no evidence of cracking or delamination was observed after the high contact pressure wear testing. This fact points out a good substrate-coating adhesion, and confirms magnetron sputtered DLC as a potential coating for orthopaedic applications.

  7. Fabrication and Characterization of Hierarchically Nanostructured Porous Carbonated Hydroxyapatite Coatings

    Institute of Scientific and Technical Information of China (English)

    吕君英; 郭亚平

    2012-01-01

    Hierarchically nanostructured porous carbonated hydroxyapatite coatings (HNPCs) on Ti6A14V substrate were fabricated by a two-stage application route:fabrication of nacre coatings (NCs) on Ti6A14V substrate by electrophoretic technique,and conversion of NCs to HNPCs in a phosphate buffer solution (PBS) by microwave irradiation method.Their samples were characterized by using XRD,FT-IR,SEM,TEM,and N2 adsorption-desorption isotherms.The results show that the microwave irradiation technique improves obviously the conversion rate of NCs to HNPCs as compared with conventional method.After soaking the NCs in the PBS,calcium ions are released from the nacre particles and react with phosphate ions to form carbonated hydroxyapatite nanoparticles.These nanoparticles aggregate to form the plate-like carbonated apatite.The mesopores with a size of about 3.9 nm and macropores with the diameters of 1~4 μm exist within and among the carbonated apatite plates,respectively.Simulated body fluid immersion tests reveal that the HNPCs have a good in vitro bioactivity.

  8. Radiative absorption enhancement from coatings on black carbon aerosols

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Xinjuan; Wang, Xinfeng; Yang, Lingxiao [Environmental Research Institute, School of Environmental Science and Engineering, Shandong University, Jinan 250100 (China); Chen, Bing, E-mail: bingchen@sdu.edu.cn [Environmental Research Institute, School of Environmental Science and Engineering, Shandong University, Jinan 250100 (China); Chen, Jianmin, E-mail: jmchen@sdu.edu.cn [Environmental Research Institute, School of Environmental Science and Engineering, Shandong University, Jinan 250100 (China); Andersson, August; Gustafsson, Örjan [Department of Environmental Science and Analytical Chemistry (ACES) and the Bolin Centre for Climate Research, Stockholm University, SE-10691 Stockholm (Sweden)

    2016-05-01

    The radiative absorption enhancement of ambient black carbon (BC), by light-refractive coatings of atmospheric aerosols, constitutes a large uncertainty in estimates of climate forcing. The direct measurements of radiative absorption enhancement require the experimentally-removing the coating materials in ambient BC-containing aerosols, which remains a challenge. Here, the absorption enhancement of the BC core by non-absorbing aerosol coatings was quantified using a two-step removal of both inorganic and organic matter coatings of ambient aerosols. The mass absorption cross-section (MAC) of decoated/pure atmospheric BC aerosols of 4.4 ± 0.8 m{sup 2}g{sup −1} was enhanced to 9.6 ± 1.8 m{sup 2}g{sup −1} at 678-nm wavelength for ambiently-coated BC aerosols at a rural Northern China site. The enhancement of MAC (E{sub MAC}) rises from 1.4 ± 0.3 in fresh combustion emissions to ~ 3 for aged ambient China aerosols. The three-week high-intensity campaign observed an average E{sub MAC} of 2.25 ± 0.55, and sulfates were primary drivers of the enhanced BC absorption. - Highlights: • A method was developed to remove coatings surrounding BC in ambient aerosols. • The MAC of decoated BC of 4.4 was enhanced to 9.6 m{sup 2}g{sup −1} for ambient BC aerosols. • BC radiative forcing in the ambient atmosphere was enhanced by a factor of ~ 2. • BC absorption enhancement peaked in day time driven by secondary sulfate.

  9. Incorporation of different antibiotics into carbonated hydroxyapatite coatings on titanium implants, release and antibiotic efficacy

    NARCIS (Netherlands)

    Stigter, M.; Bezemer, J.M.; de Groot, K.; Layrolle, P.

    2004-01-01

    Carbonated hydroxyapatite (CHA) coatings were applied onto titanium implants by using a biomimetic precipitation method. Different antibiotics were incorporated into the CHA coatings and their release and efficacy against bacteria growth were studied in vitro. The following antibiotics were used

  10. Smart Cellulose Fibers Coated with Carbon Nanotube Networks

    Directory of Open Access Journals (Sweden)

    Haisong Qi

    2014-11-01

    Full Text Available Smart multi-walled carbon nanotube (MWCNT-coated cellulose fibers with a unique sensing ability were manufactured by a simple dip coating process. The formation of electrically-conducting MWCNT networks on cellulose mono- and multi-filament fiber surfaces was confirmed by electrical resistance measurements and visualized by scanning electron microscopy. The interaction between MWCNT networks and cellulose fiber was investigated by Raman spectroscopy. The piezoresistivity of these fibers for strain sensing was investigated. The MWCNT-coated cellulose fibers exhibited a unique linear strain-dependent electrical resistance change up to 18% strain, with good reversibility and repeatability. In addition, the sensing behavior of these fibers to volatile molecules (including vapors of methanol, ethanol, acetone, chloroform and tetrahydrofuran was investigated. The results revealed a rapid response, high sensitivity and good reproducibility for these chemical vapors. Besides, they showed good selectivity to different vapors. It is suggested that the intrinsic physical and chemical features of cellulose fiber, well-formed MWCNT networks and favorable MWCNT-cellulose interaction caused the unique and excellent sensing ability of the MWCNT-coated cellulose fibers, which have the potential to be used as smart materials.

  11. Polymer Coating of Carbon Nanotube Fibers for Electric Microcables

    Directory of Open Access Journals (Sweden)

    Noe T. Alvarez

    2014-11-01

    Full Text Available Carbon nanotubes (CNTs are considered the most promising candidates to replace Cu and Al in a large number of electrical, mechanical and thermal applications. Although most CNT industrial applications require macro and micro size CNT fiber assemblies, several techniques to make conducting CNT fibers, threads, yarns and ropes have been reported to this day, and improvement of their electrical and mechanical conductivity continues. Some electrical applications of these CNT conducting fibers require an insulating layer for electrical insulation and protection against mechanical tearing. Ideally, a flexible insulator such as hydrogenated nitrile butadiene rubber (HNBR on the CNT fiber can allow fabrication of CNT coils that can be assembled into lightweight, corrosion resistant electrical motors and transformers. HNBR is a largely used commercial polymer that unlike other cable-coating polymers such as polyvinyl chloride (PVC, it provides unique continuous and uniform coating on the CNT fibers. The polymer coated/insulated CNT fibers have a 26.54 μm average diameter—which is approximately four times the diameter of a red blood cell—is produced by a simple dip-coating process. Our results confirm that HNBR in solution creates a few microns uniform insulation and mechanical protection over a CNT fiber that is used as the electrically conducting core.

  12. Antibacterial efficacy of advanced silver-amorphous carbon coatings deposited using the pulsed dual cathodic arc technique

    Energy Technology Data Exchange (ETDEWEB)

    Endrino, J L; Anders, A; Albella, J M; Horton, J A; Horton, T H; Ayyalasomayajula, P R; Allen, M, E-mail: jlendrino@icmm.csic.es

    2010-11-01

    Amorphous carbon (a-C) also referred as diamond-like carbon (DLC) films are well known to be a biocompatible material with good chemical in ertness; this makes it a strong candidate to be used as a matrix that embeds metallic elements with an antimicrobial effect. We have deposited as et of a-C:Ag films using a dual-cathode pulsed filtered cathodic arc source, the arc pulse frequency of the silver and graphite cathodes was controlled in order to obtain samples with various silver contents. In this study, we show the deposition of silver and carbon ions using this technique and analyze the advantages of incorporating silver into a-C by studying the antimicrobial properties against staphylococcus of samples deposited on Ti{sub 6}Al{sub 4}V coupons and evaluated using 24-well tissue culture plates.

  13. Microstructure and properties of SiC-coated carbon fibers prepared by radio frequency magnetron sputtering

    Science.gov (United States)

    Cheng, Yong; Huang, Xiaozhong; Du, Zuojuan; Xiao, Jianrong; Zhou, Shan; Wei, Yongshan

    2016-04-01

    SiC-coated carbon fibers are prepared at room temperature with different radio-frequency magnetron sputtering powers. Results show that the coated carbon fibers have uniform, continuous, and flawless surfaces. The mean strengths of the coated carbon fibers with different sputtering powers are not influenced by other factors. Filament strength of SiC-coated carbon fibers increases by approximately 2% compared with that of uncoated carbon fibers at a sputtering power of coated fibers increase by 9.3% and 12% at sputtering powers of 250 and 300 W, respectively. However, the mean strength of the SiC-coated carbon fibers decreased by 8% at a sputtering power of 400 W.

  14. Targeting breast cancer with sugar-coated carbon nanotubes.

    Science.gov (United States)

    Fahrenholtz, Cale D; Hadimani, Mallinath; King, S Bruce; Torti, Suzy V; Singh, Ravi

    2015-01-01

    To evaluate the use of glucosamine functionalized multiwalled carbon nanotubes (glyco-MWCNTs) for breast cancer targeting. Two types of glucosamine functionalized MWCNTs were developed (covalently linked glucosamine and non-covalently phospholipid-glucosamine coated) and evaluated for their potential to bind and target breast cancer cells in vitro and in vivo. Binding of glyco-MWCNTs in breast cancer cells is mediated by specific interaction with glucose transporters. Glyco-MWCNTs prepared by non-covalent coating with phospholipid-glucosamine displayed an extended blood circulation time, delayed urinary clearance, low tissue retention and increased breast cancer tumor accumulation in vivo. These studies lay the foundation for development of a cancer diagnostic agent based upon glyco-MWCNTs with the potential for superior accuracy over current radiopharmaceuticals.

  15. Exact Realization of a Quantum-Dimer Model in Heisenberg Antiferromagnets on a Diamond-Like Decorated Lattice

    Science.gov (United States)

    Hirose, Yuhei; Oguchi, Akihide; Fukumoto, Yoshiyuki

    2016-09-01

    We study Heisenberg antiferromagnets on a diamond-like decorated square lattice perturbed by further neighbor couplings. The second-order effective Hamiltonian is calculated and the resultant Hamiltonian is found to be a square-lattice quantum-dimer model with a finite hopping amplitude and no repulsion, which suggests the stabilization of the plaquette phase. Our recipe for constructing quantum-dimer models can be adopted for other lattices and provides a route for the experimental realization of quantum-dimer models.

  16. Microwave absorption properties of helical carbon nanofibers-coated carbon fibers

    Directory of Open Access Journals (Sweden)

    Lei Liu

    2013-08-01

    Full Text Available Helical carbon nanofibers (HCNFs coated-carbon fibers (CFs were fabricated by catalytic chemical vapor deposition method. TEM and Raman spectroscopy characterizations indicate that the graphitic layers of the HCNFs changed from disorder to order after high temperature annealing. The electromagnetic parameters and microwave absorption properties were measured at 2–18 GHz. The maximum reflection loss is 32 dB at 9 GHz and the widest bandwidth under −10 dB is 9.8 GHz from 8.2 to 18 GHz for the unannealed HCNFs coated-CFs composite with 2.5 mm in thickness, suggesting that HCNFs coated-CFs should have potential applications in high performance microwave absorption materials.

  17. Preparation of calcium carbonate particles coated with titanium dioxide

    Institute of Scientific and Technical Information of China (English)

    Hai Lin; Ying-bo Dong; Le-yong Jiang

    2009-01-01

    The preparation of a new mineral composite material, calcium carbonate particles coated with titanium dioxide, was stud-ied. The mechanism of the preparation process was proposed. The new mineral composite material was made by the mechanochemi-eal method under the optimum condition that the mass ratio of calcium carbonate particles to titanium dioxide was 6.5:3.5. The mass ratios of two different types of titanium dioxide (anatase to rutile) and grinding media to grinded materials were 8:2 and 4:1 respec-tively, and the modified density was 60%. Under this condition, the new material was capable of forming after 120-min modification.The hiding power and oil absorption of this new material were 29.12 g/m~2 and 23.30%, respectively. The results show that the modi-fication is based on surface hydroxylation. After coating with titanium dioxide, the hiding power of calcium carbonate can be im-proved greatly. The new mineral composite materials can be used as the substitute for titanium dioxide.

  18. Carbon nanotube coated fiber Bragg grating for photomechanical optic modulator.

    Science.gov (United States)

    Shivananju, B N; Suri, Ashish; Asokan, Sundarrajan; Misra, Abha

    2013-09-01

    We have demonstrated novel concept of utilizing the photomechanical actuation in carbon nanotubes (CNTs) to tune and reversibly switch the Bragg wavelength. When fiber Bragg grating coated with CNTs (CNT-FBG) is exposed externally to a wide range of optical wavelengths, e.g., ultraviolet to infrared (0.2-200 μm), a strain is induced in the CNTs which alters the grating pitch and refractive index in the CNT-FBG system resulting in a shift in the Bragg wavelength. This novel approach will find applications in telecommunication, sensors and actuators, and also for real time monitoring of the photomechanical actuation in nanoscale materials.

  19. Gas Sensors Based on Coated and Doped Carbon Nanotubes

    Science.gov (United States)

    Li, Jing; Meyyappan, Meyya

    2008-01-01

    Efforts are underway to develop inexpensive, low-power electronic sensors, based on single-walled carbon nanotubes (SWCNTs), for measuring part-per-million and part-per-billion of selected gases (small molecules) at room temperature. Chemically unmodified SWCNTs are mostly unresponsive to typical gases that one might wish to detect. However, the electrical resistances of SWCNTs can be made to vary with concentrations of gases of interest by coating or doping the SWCNTs with suitable materials. Accordingly, the basic idea of the present development efforts is to incorporate thus-treated SWCNTs into electronic devices that measure their electrical resistances.

  20. Effect of carbon coating on electrochemical performance of hard carbons as anode materials for lithium-ion batteries

    Science.gov (United States)

    Lee, Jong-Hyuk; Lee, Heon-Young; Oh, Seh-Min; Lee, Seo-Jae; Lee, Ki-Young; Lee, Sung-Man

    Surface modification by a soft-carbon coating is used to improve the electrochemical performance of hard carbons as the negative-electrode (anode) material in lithium-ion batteries. The coating process involves simple heat-treatment of a mixture of coal-tar pitch and hard carbon powders at 1000 °C. The carbon coating significantly reduces the reaction of lithium with surface functional groups or absorbed species caused by air exposure. This is attributed to the effective suppression of the diffusion of both air and water into the hard carbon by the soft-carbon coating, and the better resistance of soft carbon to air. As a result, the charge-discharge coulombic efficiency during cycling, as well as during the first cycle, is improved.

  1. Ground States of Spin-1/2 Heisenberg Antiferromagnets with Frustration on a Diamond-Like-Decorated Square Lattice

    Science.gov (United States)

    Hirose, Yuhei; Oguchi, Akihide; Fukumoto, Yoshiyuki

    2017-01-01

    We study the ground-state phase diagram of a Heisenberg model with spin S = 1/2 on a diamond-like-decorated square lattice. A diamond unit has two types of antiferromagnetic exchange interactions, and the ratio λ of the length of the diagonal bond to that of the other four edges determines the strength of frustration. It has been pointed out [https://doi.org/10.7566/JPSJ.85.033705" xlink:type="simple">J. Phys. Soc. Jpn 85, 033705 (2016)] that the so-called tetramer-dimer states, which are expected to be stabilized in an intermediate region of λc < λ < 2, are identical to the square-lattice dimer-covering states, which ignited renewed interest in high-dimensional diamond-like-decorated lattices. In order to determine the phase boundary λc, we employ the modified spin wave method to estimate the energy of the ferrimagnetic state and obtain λc = 0.974. Furthermore, our numerical diagonalization study suggests that other cluster states do not appear in the ground-state phase diagram.

  2. Plasma Assisted Chemical Vapour Deposition – Technological Design Of Functional Coatings

    Directory of Open Access Journals (Sweden)

    Januś M.

    2015-06-01

    Full Text Available Plasma Assisted Chemical Vapour Deposition (PA CVD method allows to deposit of homogeneous, well-adhesive coatings at lower temperature on different substrates. Plasmochemical treatment significantly impacts on physicochemical parameters of modified surfaces. In this study we present the overview of the possibilities of plasma processes for the deposition of diamond-like carbon coatings doped Si and/or N atoms on the Ti Grade2, aluminum-zinc alloy and polyetherketone substrate. Depending on the type of modified substrate had improved the corrosion properties including biocompatibility of titanium surface, increase of surface hardness with deposition of good adhesion and fine-grained coatings (in the case of Al-Zn alloy and improving of the wear resistance (in the case of PEEK substrate.

  3. Friction and Adhesion in Dry Warm Forging of Magnesium Alloy with Coated Tools

    Science.gov (United States)

    Matsumoto, Ryo; Kawashima, Hiroaki; Osakada, Kozo

    In order to develop forging process of magnesium alloys without lubrication, frictional behavior of magnesium alloy AZ31B (Mg-3%Al-1%Zn) is evaluated by a tapered plug penetration test under dry condition. The cemented tungsten carbide (WC) plugs polished to be a mirror-like surface are coated with diamond-like carbon (DLC) and TiAlN by physical vapor deposition (PVD). The cylindrical hollow billets of AZ31B are penetrated by the tapered plugs at a temperature of 200°C. The surface roughness of the hole of the billet, the adhesion length of AZ31B on the plug surface and the penetration load are measured. Compared with WC and TiAlN coating, it is found that DLC coating is effective in preventing AZ31B from adhering to the tool surface and reducing the penetration load.

  4. Pyrolytic-carbon coating in carbon nanotube foams for better performance in supercapacitors

    Science.gov (United States)

    He, Nanfei; Yildiz, Ozkan; Pan, Qin; Zhu, Jiadeng; Zhang, Xiangwu; Bradford, Philip D.; Gao, Wei

    2017-03-01

    Nowadays, the wide-spread adoption of supercapacitors has been hindered by their inferior energy density to that of batteries. Here we report the use of our pyrolytic-carbon-coated carbon nanotube foams as lightweight, compressible, porous, and highly conductive current collectors in supercapacitors, which are infiltrated with chemically-reduced graphene oxide and later compressed via mechanical and capillary forces to generate the active electrodes. The pyrolytic carbon coatings, introduced by chemical vapor infiltration, wrap around the CNT junctions and increase the surface roughness. When active materials are infiltrated, the pyrolytic-carbon coatings help prevent the π-stacking, enlarge the accessible surface area, and increase the electrical conductivity of the scaffold. Our best-performing device offers 48% and 57% higher gravimetric energy and power density, 14% and 23% higher volumetric energy and power density, respectively, and two times higher knee frequency, than the device with commercial current collectors, while the "true-performance metrics" are strictly followed in our measurements. We have further clarified the solution resistance, charge transfer resistance/capacitance, double-layer capacitance, and Warburg resistance in our system via comprehensive impedance analysis, which will shed light on the design and optimization of similar systems.

  5. Carbon nanotube-based coatings to induce flow enhancement in hydrophilic nanopores

    DEFF Research Database (Denmark)

    Wagemann, Enrique; Walther, Jens Honore; Zambrano, Harvey

    2016-01-01

    that carbon nanotubes (CNTs) feature ultrafast waterflow rates which result in flow enhancements of 1 to 5 orders of magnitude compared to Hagen-Poiseuille predictions. In the present study, CNT-based coatings are considered to induce water flow enhancement in silica nanopores with different radius. We......-walled carbon nanotubes implemented as coating material in silica nanopores....

  6. Electroless plating Ni-P matrix composite coating reinforced by carbon nanotubes

    Institute of Scientific and Technical Information of China (English)

    邓福铭; 陈小华; 陈卫祥; 李文铸

    2004-01-01

    Ni-P matrix composite coating reinforced by carbon nanotubes (CNTs) was deposited by electroless plating. The most important factors that influence the content of carbon nanotubes in deposits, such as agitation, surfactant and carbon nanotubes concentration in the plating bath were investigated. The surface morphology, structure and properties of the Ni-P-CNTs coating were examined. It is found that the maximum content of carbon nanotubes in the deposits is independent of carbon nanotubes concentration in the plating bath when it is up to 5 mg/L. The test results show that the carbon nanotubes co-deposited do not change the structure of the Ni-P matrix of the composite coating, but greatly increase the hardness and wear resistance and decrease the friction coefficient of the Ni-PCNTs composite coating with increasing content of carbon nanotubes in deposits.

  7. Corrosion of Carbon Steel under Epoxy-varnish Coating Studied by Scanning Kelvin Probe

    Institute of Scientific and Technical Information of China (English)

    XIAO Kui; DONG Chaofang; ZHANG Xin; WU Junsheng; XU Longjiao; LI Xiaogang

    2012-01-01

    The corrosion behavior of partly coated carbon steel was investigated by salt spray test and scanning Kelvin probe (SKP) in order to understand the long-term corrosion behavior of coated carbon steel in marine atmosphere environment.The localized corrosion was accurately characterized by SKP in both coated and uncoated regions.The SKP results showed that Volta potential varied with the test time,and the more the corrosion products,the more positive the potential.The borderline between coated and uncoated regions of partly coated steel shifted towards the coated side with the increasing of test time.The coating disbonding rate could be determined according to the shift of potential borderline measured by SKP.The corrosion mechanism of partly coated steel in NaC1 salt spray was discussed according to the potential maps and corrosion morphologies.

  8. The effect of heat treatment on the microstructure and diffusion of silver in pyrolytic carbon coatings

    OpenAIRE

    CANCINO TREJOA F.; SÁENZ PADILLA M.; LOPEZ HONORATO Eddie; CARVAJAL NUNEZ URSULA; BOSHOVEN Jacobus; Somers, Joseph

    2016-01-01

    It is well accepted that TRISO (tristructural isotropic) coated nuclear fuel particles are capable of retaining fission products up to 1600 ºC, however above this temperature fission products can diffuse through the pyrolytic carbon and silicon carbide coatings that act as the containment barriers in this fuel. Despite decades of research and development, little is known on the origin of this fuel temperature limit. Since pyrolytic carbon (PyC) coatings are an integral part of the safety of ...

  9. A novel zinc(ii) metal-organic framework with a diamond-like structure: synthesis, study of thermal robustness and gas adsorption properties.

    Science.gov (United States)

    Almáši, Miroslav; Zeleňák, Vladimír; Zukal, Arnošt; Kuchár, Juraj; Čejka, Jiří

    2016-01-21

    A solvothermal reaction of Zn(ii) salt with methanetetrabenzoic acid (H4MTB) and 1,4,8,11-tetraazacyclotetradecane (cyclam, CYC) created a new microporous metal-organic framework {[Zn2(μ4-MTB)(κ(4)-CYC)2]·2DMF·7H2O}n (DMF = N,N'-dimethylformamide). Single crystal X-ray diffraction showed that the complex exhibits a four-fold interpenetrated diamond-like structure topology with 1D jar-like channels with sizes about 14.1 × 14.1 and 2.4 × 2.4 Å(2). The stability of the framework and activation conditions of the compound have been studied by high-energy powder X-ray diffraction during in situ heating, thermogravimetric analysis coupled with mass spectrometry and infrared spectroscopy performed at different temperatures. The gas adsorption behaviour of {[Zn2(μ4-MTB)(κ(4)-CYC)2]·2DMF·7H2O}n was studied by adsorption of Ar, N2, CO2 and H2. Nitrogen and argon adsorption showed that the activated sample exhibits Brunauer-Emmet-Teller (BET) specific surface areas of 644 m(2) g(-1) (N2) and 562 m(2) g(-1) (Ar). The complex adsorbs carbon dioxide with a maximum storage capacity of 10.5 wt% at 273 K and 101 kPa. The observed hydrogen uptake was 1.27 wt% at 77 K and 800 Torr, which is the highest value reported for the compounds containing a MTB(4-) linker. The adsorption heats of carbon dioxide and hydrogen, calculated according to the Clausius-Clapeyron equation, were in the range 22.8-22.4 kJ mol(-1) for CO2 and 8.9-3.2 kJ mol(-1) for H2, indicating weak interactions of the gases with the framework.

  10. The fabrication of carbon nanotubes reinforced copper coating by a kinetic spray process.

    Science.gov (United States)

    Xiong, Yuming; Kang, Kicheol; Yoon, Sanghoon; Lee, Changhee

    2008-10-01

    In this paper, multiwalled carbon nanotubes (MWCNTs) reinforced copper coating was deposited on copper sheet through kinetic spraying process. Effect of heat treatment on microstructure, conductivity, and hardness of the coating was investigated. The incompact MWCNTs reinforced copper coating exhibits a comparable hardness, but higher electrical resistivity than pure copper coating. After heat treatment at 600 degrees C for 2 h, the hardness of copper coatings significantly decreased due to the substantial grain growth. MWCNTs reinforced copper coating showed stable hardness and electrical conductivity against heat treatment owing to the inhibition of CNTs to grain growth and the intimate contact between CNTs and copper matrix.

  11. Comparing graphene, carbon nanotubes, and superfine powdered activated carbon as adsorptive coating materials for microfiltration membranes.

    Science.gov (United States)

    Ellerie, Jaclyn R; Apul, Onur G; Karanfil, Tanju; Ladner, David A

    2013-10-15

    Multi-walled carbon nanotubes (MWCNTs), nano-graphene platelets (NGPs), and superfine powdered activated carbon (S-PAC) were comparatively evaluated for their applicability as adsorptive coatings on microfiltration membranes. The objective was to determine which materials were capable of contaminant removal while causing minimal flux reduction. Methylene blue and atrazine were the model contaminants. When applied as membrane coatings, MWCNTs had minimal retention capabilities for the model contaminants, and S-PAC had the fastest removal. The membrane coating approach was also compared with a stirred vessel configuration, in which the adsorbent was added to a stirred flask preceding the membrane cell. Direct application of the adsorbent to the membrane constituted a greater initial reduction in permeate concentrations of the model contaminants than with the stirred flask setup. All adsorbents except S-PAC showed flux reductions less than 5% after application as thin-layer membrane coatings, and flux recovery after membrane backwashing was greater than 90% for all materials and masses tested.

  12. Preparation, characterization and wear behavior of carbon coated magnesium alloy with electroless plating nickel interlayer

    Energy Technology Data Exchange (ETDEWEB)

    Mao, Yan [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Li, Zhuguo, E-mail: lizg@sjtu.edu.cn [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Academician Expert Office Workstation (Jiansheng Pan), Lin’an, Zhejiang Province (China); Feng, Kai, E-mail: fengkai@sjtu.edu.cn [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Academician Expert Office Workstation (Jiansheng Pan), Lin’an, Zhejiang Province (China); Guo, Xingwu [National Engineering Research Center of Light Alloys Net Forming (LAF), School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Zhou, Zhifeng [Department of Mechanical and Biomedical Engineering, City University of Hong Kong, Kowloon, Hong Kong (China); Dong, Jie [National Engineering Research Center of Light Alloys Net Forming (LAF), School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); Wu, Yixiong [Shanghai Key Laboratory of Materials Laser Processing and Modification, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China); State Key Laboratory of Metal Matrix Composites, Shanghai Jiao Tong University, Shanghai 200240 (China); Academician Expert Office Workstation (Jiansheng Pan), Lin’an, Zhejiang Province (China)

    2015-02-01

    Highlights: • The carbon film with nickel interlayer (Ni + C coating) is deposited on GW83. • In Ni + C composite coating the carbon coating has good adhesion with the nickel interlayer. • The wear track of Ni + C coating is narrower compared to the bare one. • The wear resistance of GW83 is greatly improved by the Ni + C coating. - Abstract: Poor wear resistance of rare earth magnesium alloys has prevented them from wider application. In this study, composite coating (PVD carbon coating deposited on electroless plating nickel interlayer) is prepared to protect GW83 magnesium alloys against wear. The Ni + C composite coating has a dense microstructure, improved adhesion strength and hardness due to the effective support of Ni interlayer. The wear test result shows that the Ni + C composite coating can greatly prolong the wear life of the magnesium alloy. The wear track of the Ni + C coated magnesium alloy is obviously narrower and shows less abrasive particles as compared with the bare one. Abrasive wear is the wear mechanism of the coatings at the room temperature. In conclusion, the wear resistance of the GW83 magnesium alloy can be greatly improved by the Ni + C composite coating.

  13. A facile hydrothermal approach for construction of carbon coating on TiO2 nanoparticles

    OpenAIRE

    Olurode, Kehinde; Neelgund, Gururaj M.; Oki, Aderemi; Luo, Zhiphing

    2011-01-01

    Herein a facile hydrothermal approach is used to construct carbon coated TiO2 nanoparticles employing dextrose as the source of carbon. The procedure is operated at a low temperature of 200 °C. Fourier infrared spectroscopy demonstrated the successful coating of carbon on TiO2 nanoparticles. The phase composition of TiO2 and carbon coated TiO2 nanoparticles were studied using X-ray diffraction and the surface morphology was analyzed by scanning and transmission electron microscopy. The existe...

  14. Parametrically Optimized Carbon Nanotube-Coated Cold Cathode Spindt Arrays

    Directory of Open Access Journals (Sweden)

    Xuesong Yuan

    2017-01-01

    Full Text Available Here, we investigate, through parametrically optimized macroscale simulations, the field electron emission from arrays of carbon nanotube (CNT-coated Spindts towards the development of an emerging class of novel vacuum electron devices. The present study builds on empirical data gleaned from our recent experimental findings on the room temperature electron emission from large area CNT electron sources. We determine the field emission current of the present microstructures directly using particle in cell (PIC software and present a new CNT cold cathode array variant which has been geometrically optimized to provide maximal emission current density, with current densities of up to 11.5 A/cm2 at low operational electric fields of 5.0 V/μm.

  15. Chemical sensors using coated or doped carbon nanotube networks

    Science.gov (United States)

    Li, Jing (Inventor); Meyyappan, Meyya (Inventor)

    2010-01-01

    Methods for using modified single wall carbon nanotubes ("SWCNTs") to detect presence and/or concentration of a gas component, such as a halogen (e.g., Cl.sub.2), hydrogen halides (e.g., HCl), a hydrocarbon (e.g., C.sub.nH.sub.2n+2), an alcohol, an aldehyde or a ketone, to which an unmodified SWCNT is substantially non-reactive. In a first embodiment, a connected network of SWCNTs is coated with a selected polymer, such as chlorosulfonated polyethylene, hydroxypropyl cellulose, polystyrene and/or polyvinylalcohol, and change in an electrical parameter or response value (e.g., conductance, current, voltage difference or resistance) of the coated versus uncoated SWCNT networks is analyzed. In a second embodiment, the network is doped with a transition element, such as Pd, Pt, Rh, Ir, Ru, Os and/or Au, and change in an electrical parameter value is again analyzed. The parameter change value depends monotonically, not necessarily linearly, upon concentration of the gas component. Two general algorithms are presented for estimating concentration value(s), or upper or lower concentration bounds on such values, from measured differences of response values.

  16. The in vitro biomineralization and cytocompatibility of polydopamine coated carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Yan Penghua [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, 18 Tianshui Middle Road, Lanzhou 730000 (China); Key Laboratory of Polymer Materials of Gansu Province, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070 (China); Wang Jinqing, E-mail: jqwang@licp.cas.cn [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, 18 Tianshui Middle Road, Lanzhou 730000 (China); Wang Lin; Liu Bin [School of Stomatology, Lanzhou University, Lanzhou 730000 (China); Lei Ziqiang [Key Laboratory of Polymer Materials of Gansu Province, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070 (China); Yang Shengrong, E-mail: sryang@lzb.ac.cn [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, 18 Tianshui Middle Road, Lanzhou 730000 (China); Key Laboratory of Polymer Materials of Gansu Province, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070 (China)

    2011-03-15

    In this work, polydopamine coated carbon nanotubes were firstly prepared by a simple and feasible route. Then, for comparison, the in vitro bioactivity and cytocompatibility of the carbon nanotubes and the polydopamine coated carbon nanotubes were assessed by immersion study in simulated body fluids and 3-(4,5-dimethyldiazol-2-yl)-2,5-diphenyl tetrazolium bromide test using osteoblast cells (MC3T3-E1), respectively. As a result, it has been demonstrated that the introduction of polydopamine coating can greatly enhance the bioactivity and promote cell proliferation of the carbon nanotubes. The improvement of bioactive behavior is attributed to the good combination of catecholamines structure of the polydopamine and the structural advantages of carbon nanotubes as a framework material. It is anticipated that the polydopamine coated carbon nanotubes would find potential applications in bone tissue engineering and other biomedical areas.

  17. Field emission from Mo2C coated carbon nanosheets

    Science.gov (United States)

    Bagge-Hansen, M.; Outlaw, R. A.; Miraldo, P.; Zhu, M. Y.; Hou, K.; Theodore, N. D.; Zhao, X.; Manos, D. M.

    2008-01-01

    Carbon nanosheets have recently evolved into useful edge emitters with high emission current densities, low threshold electric fields, and long lifetimes. In addition to further improvement in these characteristics, good stability and repeatability are also essential for these materials to be suitable for high vacuum applications such as microwave tubes and flat panel displays. Since the work function of graphite, carbon nanotubes, and amorphous carbon is relatively high, 4.6-4.8eV, selective thin film coatings may offer significant advantages. Carbides are a good film choice for their corrosive resistance, chemical stability, and substantially lower work function. Approximately 3 ML (monolayer) (˜1nm) of molybdenum were deposited on carbon nanosheets by physical vapor deposition and the carbide (Mo2C) formed by heating to >200°C at 1×10-8Torr. The carbide stoichiometry was confirmed in situ by the characteristic Auger triple peak at 272eV. A stoichiometric Mo2C calibration sample was used to acquire the Auger electron spectroscopy asymmetric ratio of 0.7 and this was used to determine the carbide growth as a function of temperature (from room temperature to 1000°C). Field emission currents of up to 400μA were compared with uncoated CNS at a given electric field. The Mo2C/CNS cathodes were shown to have greater than a factor of 100 increase in current and greater than 2V/μm decrease in threshold. The Fowler-Nordheim plots were exceptionally linear and quite repeatable (correlation coefficient R2=0.999+). Using the slope and vertical intercept, an emission area for the 0.07cm2 Mo2C/CNS dot sample was determined to be ˜3×10-9cm2 and the field enhancement factor was found to be β ˜530.

  18. Microstructural study of oxidation of carbon-rich amorphous boron carbide coating

    Institute of Scientific and Technical Information of China (English)

    Bin ZENG; Zu-de FENG; Si-wei LI; Yong-sheng LIU

    2008-01-01

    Carbon-rich amorphous boron carbide (BxC) coatings were annealed at 400℃, 700℃, 1000℃ and 1200℃ for 2 h in air atmosphere. The microstructure and composition of the as-deposited and annealed coat-ings were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), micro-Raman spectro-scopy and energy dispersive X-ray spectroscopy (EDS). All of the post-anneal characterizations demonstrated the ability of carbon-rich BxC coatings to protect the graphite substrate against oxidation. Different oxidation modes of the coatings were found at low temperature (400℃), moderate temperature (700℃) and high temper-ature (1000℃ and 1200℃). Finally, the feasibility of the application of carbon-rich BxC instead of pyrolytic car-bon (PyC) as a fiber/matrix interlayer in ceramics-matrix composites (CMCs) is discussed here.

  19. Fe3O4/carbon coated silicon ternary hybrid composite as supercapacitor electrodes

    Science.gov (United States)

    Oh, Ilgeun; Kim, Myeongjin; Kim, Jooheon

    2015-02-01

    In this study, Fe3O4/carbon-coated Si ternary hybrid composites were fabricated. A carbon layer was directly formed on the surface of Si by the thermal vapor deposition. The carbon-coating layer not only prevented the contact between Si and reactive electrolyte but also provided anchoring sites for the deposition of Fe3O4. Fe3O4 nanoparticles were deposited on the surface of carbon-coated Si by the hydrazine reducing method. The morphology and structure of Fe3O4 and carbon layer were characterized via X-ray diffractometry, field emission scanning electron microscopy, field emission transmission electron microscopy, X-ray photoelectron spectroscopy, and thermogravimetric analyses. These characterizations indicate that a carbon layer was fully coated on the Si particles, and Fe3O4 particles were homogeneously deposited on the carbon-coated Si particles. The Fe3O4/carbon-coated Si electrode exhibited enhanced electrochemical performance, attributed to the high conductivity and stability of carbon layer and pseudocapacitive reaction of Fe3O4. The proposed ternary-hybrid composites may be potentially useful for the fabrication of high-performance electrodes.

  20. CARBON COATED (CARBONOUS) CATALYST IN EBULLATED BED REACTOR FOR PRODUCTION OF OXYGENATED CHEMICALS FROM SYNGAS/CO2

    Energy Technology Data Exchange (ETDEWEB)

    Peizheng Zhou

    2002-12-30

    This report summarizes the work completed under DOE's Support of Advanced Fuel Research program, Contract No. DE-FG26-99FT40681. The contract period was October 2000 through September 2002. This R&D program investigated the modification of the mechanical strength of catalyst extrudates using Hydrocarbon Technologies, Inc. (HTI) carbon-coated catalyst technology so that the ebullated bed technology can be utilized to produce valuable oxygenated chemicals from syngas/CO{sub 2} efficiently and economically. Exothermic chemical reactions benefit from the temperature control and freedom from catalyst fouling provided by the ebullated bed reactor technology. The carbon-coated extrudates prepared using these procedures had sufficient attrition resistance and surface area for use in ebullated bed operation. The low cost of carbon coating makes the carbon-coated catalysts highly competitive in the market of catalyst extrudates.

  1. Mixed polyvalent-monovalent metal coating for carbon-graphite fibers

    Science.gov (United States)

    Harper-Tervet, J.; Tervet, F. W.; Humphrey, M. F. (Inventor)

    1982-01-01

    An improved coating of gasification catalyst for carbon-graphite fibers is provided comprising a mixture of a polyvalent metal such as calcium and a monovalent metal such as lithium. The addition of lithium provides a lighter coating and a more flexible coating when applied to a coating of a carboxyl containing resin such as polyacrylic acid since it reduces the crosslink density. Furthermore, the presence of lithium provides a glass-like substance during combustion which holds the fiber together resulting in slow, even combustion with much reduced evolution of conductive fragments. The coated fibers are utilized as fiber reinforcement for composites.

  2. Dielectric properties of WS2-coated multiwalled carbon nanotubes studied by energy-loss spectroscopic profiling

    Science.gov (United States)

    Stolojan, Vlad; Silva, S. R. P.; Goringe, Michael J.; Whitby, R. L. D.; Hsu, Wang K.; Walton, D. R. M.; Kroto, Harold W.

    2005-02-01

    We investigate experimentally the electronic properties of the coating for multiwalled carbon nanotubes covered in tungsten disulfide (WS2) of various thicknesses. Coatings of thicknesses between 2 and 8 monolayers (ML) are analyzed using energy-loss spectroscopic profiling (ELSP), by studying the variations in the plasmon excitations across the coated nanotube, as a function of the coating thickness. We find a change in the ELSP for coatings above 5 ML thickness, which we interpret in terms of a change in its dielectric properties.

  3. Nanocomposite tantalum-carbon-based films deposited by femtosecond pulsed laser ablation

    Energy Technology Data Exchange (ETDEWEB)

    Benchikh, N. [Laboratoire Traitement du Signal et Instrumentation, UMR 5516, Universite J. Monnet, 10 rue Barrouin, 42000 Saint-Etienne (France); Garrelie, F. [Laboratoire Traitement du Signal et Instrumentation, UMR 5516, Universite J. Monnet, 10 rue Barrouin, 42000 Saint-Etienne (France); Wolski, K. [Ecole Nationale Superieure des Mines de Saint-Etienne, Centre SMS - URA CNRS 5146, 158 cours Fauriel, 42023 Saint-Etienne, Cedex 02 (France); Donnet, C. [Laboratoire Traitement du Signal et Instrumentation, UMR 5516, Universite J. Monnet, 10 rue Barrouin, 42000 Saint-Etienne (France)]. E-mail: Christophe.Donnet@univ-st-etienne.fr; Fillit, R.Y. [Ecole Nationale Superieure des Mines de Saint-Etienne, Centre SMS - URA CNRS 5146, 158 cours Fauriel, 42023 Saint-Etienne, Cedex 02 (France); Rogemond, F. [Laboratoire Traitement du Signal et Instrumentation, UMR 5516, Universite J. Monnet, 10 rue Barrouin, 42000 Saint-Etienne (France); Subtil, J.L. [Laboratoire Traitement du Signal et Instrumentation, UMR 5516, Universite J. Monnet, 10 rue Barrouin, 42000 Saint-Etienne (France); Rouzaud, J.N. [Laboratoire de Geologie de l' Ecole Normale Superieure de Paris 24, rue Lhomond 75231-Paris Cedex 5 (France); Laval, J.Y. [Laboratoire de Physique du Solide, UPR5 CNRS-ESPCI, 10 rue Vauquelin 75231-Paris Cedex 05 (France)

    2006-01-03

    Nanostructured coatings of metal (tantalum) containing diamond-like carbon (a-C:Ta) have been prepared by femtosecond pulsed laser deposition (PLD). The films, containing 15 at.% tantalum, have been deposited by ablating sequentially graphite and metallic tantalum in vacuum conditions with an amplified Ti:sapphire laser. The coatings have been investigated by X-ray photoelectron spectroscopy, grazing angle X-ray diffraction, energy filtered transmission electron microscopy, scanning and high resolution transmission electron microscopies. Evidence of metallic {alpha}-Ta and {beta}-Ta particles (diameter in the 100 nm range) and smaller quasi-amorphous tantalum clusters embedded in the carbonaceous matrix have been shown. A thin tantalum carbide interface between the carbon matrix and the top surface of the tantalum nodules has also been identified. The ability of femtosecond pulsed laser deposition to synthetize nanocomposite carbon-based films and to control their nanostructure is discussed.

  4. Carbon fiber CVD coating by carbon nanostructured for space materials protection against atomic oxygen

    Science.gov (United States)

    Pastore, Roberto; Bueno Morles, Ramon; Micheli, Davide

    2016-07-01

    adhesion and durability in the environment. Though these coatings are efficient in protecting polymer composites, their application imposes severe constraints. Their thermal expansion coefficients may differ markedly from those of polymer composite substrates: as a result, cracks develop in the coatings on thermal cycling and AO can penetrate through them to the substrate. In addition to the technicalities of forming an effective barrier, such factors as cost, convenience of application and ease of repair are important considerations in the selection of a coating for a particular application. The latter issues drive the aerospace research toward the development of novel light composite materials, like the so called polymer nanocomposites, which are materials with a polymer matrix and a filler with at least one dimension less than 100 nanometers. Current interest in nanocomposites has been generated and maintained because nanoparticle-filled polymers exhibit unique combinations of properties not achievable with traditional composites. These combinations of properties can be achieved because of the small size of the fillers, the large surface area the fillers provide, and in many cases the unique properties of the fillers themselves. In particular, the carbon fiber-based polymeric composite materials are the basic point of interest: the aim of the present study is to find new solution to produce carbon fiber-based composites with even more upgraded performances. One intriguing strategy to tackle such an issue has been picked out in the coupling between the carbon fibers and the carbon nanostructures. That for two main reasons: first, carbon nanostructures have shown fancy potentialities for any kind of technological applications since their discovery, second, the chemical affinity between fiber and nanostructure (made of the same element) should be a likely route to approach the typical problems due to thermo-mechanical compatibility. This work is joined in such framework

  5. Toward uniform and ultrathin carbon layer coating on lithium iron phosphate using liquid carbon dioxide for enhanced electrochemical performance

    Science.gov (United States)

    Hong, Seung-Ah; Kim, Dong Hyun; Chung, Kyung Yoon; Chang, Wonyoung; Yoo, Jibeom; Kim, Jaehoon

    2014-09-01

    In this communication, uniform and ultrathin carbon coating on LiFePO4 (LFP) particles are performed using liquid carbon dioxide (l-CO2)-based free-meniscus coating. The uniform and conformal coverage of the carbon layer on LFP with a thickness of 3.3 nm, and a uniform distribution of carbon on the entire surface of the LFP particle are confirmed. The carbon-coated LFP (C-LFP) with a carbon content of 1.9 wt.% obtained using l-CO2-based coating exhibits a discharge capacity of 169 mAh g-1 at 0.1 C and 71 mAh g-1 at 30 C, while much lower discharge capacity of 146 mAh g-1 at 0.1 C and 17 mAh g-1 at 30 C is observed when C-LFP with an optimized carbon content of 6.0 wt.% is prepared using conventional aqueous-based coating.

  6. Optical properties of black carbon aggregates with non-absorptive coating

    Science.gov (United States)

    Liu, Chao; Li, Ji; Yin, Yan; Zhu, Bin; Feng, Qian

    2017-01-01

    This study develops an idealized model to account for the effects of non-absorptive coating on the optical properties of black carbon (BC) aggregates. The classic fractal aggregate is applied to represent realistic BC particles, and the coating is assumed to be spherical. To accelerate the single-scattering simulation, BC monomers that were overlapped with coating sphere (not those completely inside the coating) are slightly moved to avoid overlapping. The multiple-sphere T-matrix method (MSTM) becomes applicable to calculate the optical properties of inhomogeneous particles with any coating amount, and is generally two orders of magnitude faster than the discrete-dipole approximation for particles we considered. Furthermore, the simple spherical coating is found to have similar effects on the optical properties to those based on more complicated coating structure. With the simple particle model and the efficient MSTM, it becomes possible to consider the influence of coating with much more details. The non-absorptive coating of BC aggregates can significantly enhance BC extinction and absorption, which is consistent with previous studies. The absorption of coated aggregates can be over two times stronger than that of BC particles without coating. Besides the coating volume, the relative position between the mass centers of BC aggregate and coating also plays an important role on the optical properties, and should obviously be considered in further studies.

  7. Preparation and Application of Conductive Textile Coatings Filled with Honeycomb Structured Carbon Nanotubes

    Directory of Open Access Journals (Sweden)

    Filip Govaert

    2014-01-01

    Full Text Available Electrical conductive textile coatings with variable amounts of carbon nanotubes (CNTs are presented. Formulations of textile coatings were prepared with up to 15 wt % of CNT, based on the solid weight of the binder. The binders are water based polyacrylate dispersions. The CNTs were mixed into the binder dispersion starting from a commercially available aqueous CNT dispersion that is compatible with the binder dispersion. Coating formulations with variable CNT concentrations were applied on polyester and cotton woven and knitted fabrics by different textile coating techniques: direct coating, transfer coating, and screen printing. The coatings showed increasing electrical conductivity with increasing CNT concentration. The coatings can be regarded to be electrically conductive (sheet resistivity<103 Ohm/sq starting at 3 wt% CNT. The degree of dispersion of the carbon nanotubes particles inside the coating was visualized by scanning electron microscopy. The CNT particles form honeycomb structured networks in the coatings, proving a high degree of dispersion. This honeycomb structure of CNT particles is forming a conductive network in the coating leading to low resistivity values.

  8. Implementation of Carbon Thin Film Coatings in the Super Proton Synchrotron (SPS) for Electron Cloud Mitigation

    CERN Document Server

    Costa Pinto, P; Basso, T; Edwards, P; Mensi, M; Sublet, A; Taborelli, M

    2014-01-01

    Low Secondary Electron Yield (SEY) carbon thin films eradicate electron multipacting in accelerator beam pipes. Two magnetic cells of the SPS were coated with such material and installed. In total more than forty vacuum vessels and magnet interconnections were treated. The feasibility of the coating process was validated. The performance of the carbon thin film will be tested with LHC nominal beams after the end of the long shutdown 1. Particular attention will be drawn to the long term behaviour. This paper presents the sputtering techniques used to coat the different components; their characterization (SEY measurements on coupons, RF multipacting tests and pump down curves); and the technology to etch the carbon film in case of a faulty coating. The strategy to coat the entire SPS will also be described.

  9. Investigation of electronic structure and thermodynamic properties of quaternary Li-containing chalcogenide diamond-like semiconductors

    Science.gov (United States)

    Berarma, K.; Charifi, Z.; Soyalp, F.; Baaziz, H.; Uğur, G.; Uğur, Ş.

    2016-12-01

    Using first-principles calculations based on density functional theory, the structural, electronic and thermodynamic properties of Li2CdGeS4 and Li2CdSnS4 compounds are investigated. We confirmed that both Li2CdGeS4 and Li2CdSnS4 are diamond-like semiconductors of the wurtz-stannite structure type based on that of diamond in terms of tetrahedra volume. All the tetrahedra are almost regular with major distortion from the ideal occurring in the LiS4 tetrahedron, with values for S-Li-S ranging from 105.69° to 112.84° in the Li2CdGeS4 compound. Furthermore, the Cd-S bond possesses a stronger covalent bonding strength than the Li/Ge-S bonds. In addition, the inter-distances in Li2CdSnS4 show a larger spread than the distances in the Li2CdGeS4 compound. The electronic structures have been calculated to understand the bonding mechanism in quaternary Li-containing chalcogenide diamond-like semiconductors. Our results show that Li2CdGeS4 and Li2CdSnS4 are semiconductors with a direct band gap of 2.79 and 2.42 eV and exhibit mixed ionic-covalent bonding. It is also noted that replacing Ge by Sn leads to a decrease in the band gap; this behavior is explained in terms of bond lengths and electronegativity differences between atoms. Optical properties, including the dielectric function, reflectivity, and absorption coefficient, each as a function of photon energy are calculated and show an optical anisotropy for Li2CdGeS4 and Li2CdSnS4. The static dielectric constant {\\varepsilon }1(0) and static refractive index n(0) decrease when Ge is replaced by Sn. The influence of pressures and temperatures on the thermodynamic properties like the specific heat at constant volume {C}v, and at constant pressure {C}p, the Debye temperature {{{\\Theta }}}{{D}}, the entropy S and the Grüneisen parameter γ have been predicted at enlarged pressure and temperature ranges. The principal aspect from the obtained results is the close similarity of both compounds.

  10. Ordered mesoporous carbon coating on cordierite: Synthesis and application as an efficient adsorbent

    Energy Technology Data Exchange (ETDEWEB)

    Wan, Ying, E-mail: ywan@shnu.edu.cn [Key Laboratory of Resource Chemistry of Ministry of Education, Shanghai Key Laboratory of Rare Earth Functional Materials, Shanghai Normal University, Shanghai 200234 (China); Department of Chemistry, Shanghai Normal University, Shanghai 200234 (China); Cui, Xiangting; Wen, Zhentao [Department of Chemistry, Shanghai Normal University, Shanghai 200234 (China)

    2011-12-30

    Highlight: Black-Right-Pointing-Pointer Surfactant self-assembly of ordered mesoporous carbon coating on honeycomb cordierite. Black-Right-Pointing-Pointer Carbon coating with opened, hexagonally ordered pore arrays. Black-Right-Pointing-Pointer Honeycomb adsorbents for removal of p-chlorophenol. Black-Right-Pointing-Pointer The adsorbents exhibit large processing volume, and great advantages in reusability. - Abstract: Ordered mesoporous carbon coating on the honeycomb cordierite substrate has been prepared using low-polymerized phenolic resins as carbon sources and triblock copolymer F127 as the structure directing agent via the evaporation induced self-assembly route. The high-resolution scanning electron microscopy (HRSEM), transmission electron microscopy (TEM), and nitrogen sorption techniques prove the hexagonally ordered pore arrays of carbon coating on the cordierite. The honeycomb monolith adsorbents coated by ordered mesoporous carbons are directly used without any activation, and exhibit adsorption capacities for chlorinated organic pollutants in water with 200 mg/g for p-chlorophenol and 178 mg/g for p-chloroaniline (with respect to the net carbon coating), high adsorption ratio for low-concentration pollutants, large processing volumes and reusability. More than 200 repeated times can be achieved without obvious loss in both adsorption capacity and weight.

  11. Electromagnetic Wave Shieding Effectiveness of Carbon Fiber Sheet Coated Ferrite Film by Microwave-Hydrothermal Process

    Science.gov (United States)

    Murakami, Ri Ichi; Yamamoto, Hidetoshi; Kim, Chan Kong; Yim, Cheol Mun; Kim, Yun Hae

    The developments of electromagnetic wave shielding materials are strongly required because the malfunction of electronic equipment, mobile phone and wireless LAN avoids. In this study, it was investigated that the electromagnetic shielding effectiveness of carbon fiber sheets were enhanced by the ferrite which was coated by the microwave hydrothermal process. For coated carbon fiber sheet, the effects of ferrite and lamination of carbon fiber textile on the electromagnetic wave shielding effectiveness were discussed. In the range of frequency (100 1 GHz), the electromagnetic wave shielding effectiveness was measured by using TEM-Cell. The electromagnetic wave shielding effectiveness was greater for the coated carbon fiber sheets than for the uncoated carbon fiber sheets. When the insulation film was located between two carbon fiber sheets, the electromagnetic wave shielding effectiveness increased.

  12. Progress in Tribological Properties of Nano-Composite Hard Coatings under Water Lubrication

    Directory of Open Access Journals (Sweden)

    Qianzhi Wang

    2017-02-01

    Full Text Available The tribological properties, under water-lubricated conditions, of three major nano-composite coatings, i.e., diamond-like carbon (DLC or a-C, amorphous carbon nitride (a-CNx and transition metallic nitride-based (TiN-based, CrN-based, coatings are reviewed. The influences of microstructure (composition and architecture and test conditions (counterparts and friction parameters on their friction and wear behavior under water lubrication are systematically elucidated. In general, DLC and a-CNx coatings exhibit superior tribological performance under water lubrication due to the formation of the hydrophilic group and the lubricating layer with low shear strength, respectively. In contrast, TiN-based and CrN-based coatings present relatively poor tribological performance in pure water, but are expected to present promising applications in sea water because of their good corrosion resistance. No matter what kind of coatings, an appropriate selection of counterpart materials would make their water-lubricated tribological properties more prominent. Currently, Si-based materials are deemed as beneficial counterparts under water lubrication due to the formation of silica gel originating from the hydration of Si. In the meantime, the tribological properties of nano-composite coatings in water could be enhanced at appropriate normal load and sliding velocity due to mixed or hydrodynamic lubrication. At the end of this article, the main research that is now being developed concerning the development of nano-composite coatings under water lubrication is described synthetically.

  13. Functionalized, biocompatible, and impermeable nanoscale coatings for PEEK.

    Science.gov (United States)

    Awaja, Firas; Cools, Pieter; Lohberger, Birgit; Nikiforov, Anton Yu; Speranza, Giorgio; Morent, Rino

    2017-07-01

    Biologically compatible coatings that provide hermetic seal could resolve a major technological hurdle in the attempt to replace metals with polymers for biochips and active medical implants. The use of amorphous carbon/diamond like carbon (a-C:H) coatings to hermetically seal and biologically enhance polyether-ether-ketone (PEEK) for biomedical device integration in the human body was investigated. The PEEK coating functionality (sp3/sp2 ratio), hardness and thickness (70-200nm) were controlled, by varying H2 and N2 concentration during the plasma operation with CH4. a-C:H coatings having the highest indentation modulus of 13.5GPa, originate out of a CH4 (90%) rich composition. Even in a mixture of 70/30 H2/CH4 the hardness is 4.76GPa, corresponding to hard and dense coatings. In all tested conditions of deposition coatings hardens was sufficient for the purpose of PEEK implants modification. The synthesized (a-C:H) nanoscale coatings were not water permeable as measured by the hydrolysis test, resolving the traditional challenge of swelling in wet environment. The hardness of the coatings showed strong correlations with the thickness, surprisingly however, with no correlations with the sp3/sp2 ratio. Selected non water permeable nanoscale coating on PEEK showed strong bioactivity by being viable for human osteoblast (hFOB) and human fibroblast (hGF) cells without toxicity issues. No correlation was observed between the coatings sp3/sp2 ratio and biological performance. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Hexagonal Boron Nitride Coated Carbon Nanotubes: Interlayer Polarization Improved Field Emission.

    Science.gov (United States)

    Chang, Han-Chen; Tsai, Hsin-Jung; Lin, Wen-Yi; Chu, Yung-Chi; Hsu, Wen-Kuang

    2015-07-08

    Coating of h-BN onto carbon nanotubes induces polarization at interfaces, and charges become localized at N and C atoms. Field emission of coated tubes is found to be highly stable, and current density fluctuates within 4%. Study further reveals that the electric field established between coatings and tubes facilitates charge transfer across interfaces and electrons are emitted through occupied and unoccupied bands of N and B atoms.

  15. Superlubricity in vehicles. New carbon-based materials reduce fuel consumption and wear; Supraschmierung im Automobil. Neue, kohlenstoffbasierte Werkstoffe mindern Kraftstoffverbrauch und Verschleiss

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, Franz

    2012-07-01

    During the long development history of mechanical engineering, engineers have substantially exhausted the traditional methods of reducing friction. Further optimisations are mostly just a matter of a few per cent. Innovative coatings made of diamond-like, shiny black carbon compounds can now exploit their advantages. They combine extraordinary lubricity with anti-adhesive properties, chemical stability and extreme material hardness. In the Pegasus research project, scientists from research and industry are working on their large-scale use for drive trains in vehicles. (orig.)

  16. Effects of temperature on internal friction of Graphit-iC graphite-like carbon coatings

    Science.gov (United States)

    Zhu, Zhi-yong; Shi, Wen; Wan, Zi; Yuan, Jun-feng; Li, Xiao

    2013-12-01

    Graphit-iC graphite-like carbon coatings were deposited on SDC90 cold work die steel by using an unbalanced magnetron sputtering technology. Effects of the temperature on microstructure and internal friction of the carbon coatings were characterized by Raman spectroscopy (Raman) and a low-frequency mechanical analyzer (LMA-1) testing system. The results indicate that the internal friction of the two-side deposited carbon coatings is small (2.17×10-4), being higher than one of the substrate (1.63×10-4), and increases with temperature. However, there is an internal friction peak at 250°C accompanied with partial sp3 transferred to sp2 and increasing the intensity ratio ID/IG. There is gradual graphitization tendency of the carbon coatings as temperatures increase from 25°C to 350 °C. This would be progressive transformation from amorphous to crystalline.

  17. Influence of the Manufacturing Process on Defects in the Galvanized Coating of High Carbon Steel Wires

    National Research Council Canada - National Science Library

    Marcello Gelfi; Luigi Solazzi; Sandro Poli

    2017-01-01

    This study is a detailed failure analysis of galvanized high carbon steel wires, which developed coating cracks during the torsion test performed as a quality control at the end of the manufacturing process...

  18. The fabrication of carbon-nanotube-coated electrodes and a field-emission-based luminescent device.

    Science.gov (United States)

    Agarwal, Sanjay; Yamini Sarada, B; Kar, Kamal K

    2010-02-10

    Tungsten substrates were coated with an Ni or Ni-Co catalyst by the electroless dip coating technique. Various carbon nanotubes were synthesized by the catalytic chemical vapor deposition (CVD) method under different growth conditions. It was observed that Ni-and Ni-Co-coated tungsten substrates give very good growth of carbon nanotubes (CNT) in terms of yield, uniformity and alignment at a growth temperature of 600 degrees C. We fabricated a field-emission-based luminescent light bulb where a tungsten wire coated with carbon nanotubes served as a cathode. Results show lower threshold voltage, better emission stability and higher luminescence for CNT cathodes in comparison with uncoated tungsten cathodes. We found that aligned-coiled carbon nanotubes are superior to straight CNTs in terms of field emission characteristics and luminescence properties.

  19. Increased sensitivity in fiber-based spectroscopy using carbon-coated fiber.

    Science.gov (United States)

    Sudirman, Aziza; Norin, Lars; Margulis, Walter

    2012-12-17

    Carbon-coated optical fibers are used here for reducing the luminescence background created by the primary-coating and thus increase the sensitivity of fiber-based spectroscopy systems. The 2-3 orders of magnitude signal-to-noise ratio improvement with standard telecom fibers is sufficient to allow for their use as Raman probes in the identification of organic solvents.

  20. Incorporation of different antibiotics into carbonated hydroxyapatite coatings on titanium implants, release and antibiotic efficacy

    NARCIS (Netherlands)

    Stigter, M.; Bezemer, J.; Groot, de K.; Layrolle, P.

    2004-01-01

    Carbonated hydroxyapatite (CHA) coatings were applied onto titanium implants by using a biomimetic precipitation method. Different antibiotics were incorporated into the CHA coatings and their release and efficacy against bacteria growth were studied in vitro. The following antibiotics were used wit

  1. Characterization of Carbon Coatings with Low Secondary Electron Yield

    CERN Document Server

    Yin Vallgren, C; Costa Pinto, P; Kuzucan, A; Neupert, H; Taborelli, M

    2011-01-01

    Amorphous carbon (a-C) coatings can reliably be produced with a maximum secondary electron yield (SEY) close to 1 at room temperature. Measurements at low temperature (LHe) are in progress. Analysis by X-ray Photoemission Spectroscopy (XPS) shows a correlation between the lineshape of C1s spectrum in XPS and the maximum SEY of the investigated samples. The initial level of oxygen on the surface of the various samples does not seem to be related to the initial maximum SEY value. However, the increase of the SEY with air exposure time on each individual sample is related to the amount of oxygen containing adsorbates. Storage in different environments has been investigated (static vacuum, aluminium foil, dry nitrogen and desiccators), and shows significant differences in the “aging” behaviour. Aging is very moderate when storing samples wrapped in aluminium foil in air. Samples which have undergone aging due to inappropriate storage can be recovered nearly to the initial value of their SEY by surface treatme...

  2. Morphological and microstructural studies on aluminizing coating of carbon steel

    Energy Technology Data Exchange (ETDEWEB)

    Samsu, Zaifol; Othman, Norinsan Kamil; Daud, Abd Razak; Hussein, Hishammuddin [School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia)

    2013-11-27

    Hot dip aluminizing is one of the most effective methods of surface protection for steels and is gradually gaining popularity. The morphology and microstructure of an inter-metallic layer form on the surface of low carbon steel by hot dip aluminization treatment had been studied in detail. This effect has been investigated using optical and scanning electron microscopy, and X-ray diffraction. The result shows that the reaction between the steel and the molten aluminium leads to the formation of Fe–Al inter-metallic compounds on the steel surface. X-ray diffraction and electron microscopic studies showed that a two layer coating was formed consisting of an external Al layer and a (Fe{sub 2}Al{sub 5}) inter metallic on top of the substrate after hot dip aluminizing process. The inter-metallic layer is ‘thick’ and exhibits a finger-like growth into the steel. Microhardness testing shown that the intermetallic layer has high hardness followed by steel substrate and the lowest hardness was Al layer.

  3. Behavior of Plasma-Sprayed Hydroxyapatite Coatings onto Carbon/carbon Composites in Simulated Body Fluid

    Science.gov (United States)

    Sui, Jin-Ling; Bo, Wu; Hai, Zhou; Cao, Ning; Li, Mu-Sen

    Two types of hydroxyapatite (HA) coatings onto carbon/carbon composite (C/C composites) substrates, deposited by plasma spraying technique, were immersed in a simulated body fluid (SBF) in order to determine their behavior in conditions similar to the human blood plasma. Calcium ion concentration, pH value, microstructure, and phase compositions were analyzed. Results demonstrated that both the crystal Ca-P phases or the amorphous HA do dissolve slightly, and the dissolution of CaO phases in SBF was evident after 1 day of soaking. The calcium-ion concentration was decreased and the pH value of SBF was increased with the increasing of the immersing time. The precipitation was mainly composed of HA, which was verified by X-ray diffraction (XRD) and electron-probe microanalyzer.

  4. Preparation and characterization of boron nitride coatings on carbon fibers from borazine by chemical vapor deposition

    Energy Technology Data Exchange (ETDEWEB)

    Li Junsheng, E-mail: charlesljs@163.com [State Key Laboratory of Advanced Ceramic Fibers and Composites, College of Aerospace and Materials Engineering, National University of Defense Technology, Changsha, 410073 (China); Zhang Changrui; Li Bin [State Key Laboratory of Advanced Ceramic Fibers and Composites, College of Aerospace and Materials Engineering, National University of Defense Technology, Changsha, 410073 (China)

    2011-06-15

    Boron nitride (BN) coatings were deposited on carbon fibers by chemical vapor deposition (CVD) using borazine as single source precursor. The deposited coatings were characterized by scanning electron microscopy (SEM), Auger electron spectroscopy (AES), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy. The effect of temperatures on growth kinetics, morphology, composition and structure of the coatings was investigated. In the low temperature range of 900 deg. C-1000 deg. C, the growth rate increased with increasing temperature complying with Arrhenius law, and an apparent active energy of 72 kJ/mol was calculated. The coating surface was smooth and compact, and the coatings uniformly deposited on individual fibers of carbon fiber bundles. The growth was controlled by surface reaction. At 1000 deg. C, the deposition rate reached a maximum (2.5 {mu}m/h). At the same time, the limiting step of the growth translated to be mass-transportation. Above 1100 deg. C, the growth rate decreased drastically due to the occurrence of gas-phase nucleation. Moreover, the coating surface became loose and rough. Composition and structure examinations revealed that stoichiometric BN coatings with turbostratic structure were obtained below 1000 deg. C, while hexagonal BN coatings were deposited above 1100 deg. C. A penetration of carbon element from the fibers to the coatings was observed.

  5. Investigation of surface finishing of carbon based coated tools for dry deep drawing of aluminium alloys

    Science.gov (United States)

    Steiner, J.; Andreas, K.; Merklein, M.

    2016-11-01

    Global trends like growing environmental awareness and demand for resource efficiency motivate an abandonment of lubricants in metal forming. However, dry forming evokes increased friction and wear. Especially, dry deep drawing of aluminum alloys leads to intensive interaction between tool and workpiece due to its high adhesion tendency. One approach to improve the tribological behavior is the application of carbon based coatings. These coatings are characterized by high wear resistance. In order to investigate the potential of carbon based coatings for dry deep drawing, friction and wear behavior of different coating compositions are evaluated in strip drawing tests. This setup is used to model the tribological conditions in the flange area of deep drawing operations. The tribological behavior of tetrahedral amorphous (ta-C) and hydrogenated amorphous carbon coatings with and without tungsten modification (a-C:H:W, a-C:H) is investigated. The influence of tool topography is analyzed by applying different surface finishing. The results show reduced friction with decreased roughness for coated tools. Besides tool topography the coating type determines the tribological conditions. Smooth tools with ta-C and a-C:H coatings reveal low friction and prevent adhesive wear. In contrast, smooth a-C:H:W coated tools only lead to slight improvement compared to rough, uncoated specimen.

  6. Efficient coating of transparent and conductive carbon nanotube thin films on plastic substrates

    Energy Technology Data Exchange (ETDEWEB)

    Ng, M H Andrew; Hartadi, Lysia T; Tan Huiwen; Poa, C H Patrick [Institute of Materials Research and Engineering, 3 Research Link, 117602 (Singapore)], E-mail: patrick-poa@imre.a-star.edu.sg

    2008-05-21

    Optically transparent and electrically conductive single-walled carbon nanotube (SWNT) thin films were fabricated at room temperature using a dip-coating technique. The film transparency and sheet resistance can be easily tailored by controlling the number of coatings. Aminopropyltriethoxysilane (APTS) was used as an adhesion promoter and, together with surfactant Triton X-100, greatly improved the SWNTs coating. Only five coats were required to obtain a sheet resistance of 2.05 {omega}{open_square} and film transparency of 84 %T. The dip-coated film after post-deposition treatment with nitric acid has a sheet resistance as low as 130 {omega}{open_square} at 69 %T. This technique is suitable for large-scale SWNT coating at room temperature and can be used on different types of substrates such as glass and plastics. This paper will discuss the role of the adhesion promoter and surfactant in the coating process.

  7. A process for the production of a scale-proof and corrosion-resistant coating on graphite and carbon bodies

    Science.gov (United States)

    Fitzer, E.

    1981-01-01

    A process for the production of a corrosion resistant coating on graphite and carbon bodies is described. The carbon or graphite body is coated or impregnated with titanium silicide under the addition of a metal containing wetting agent in a nitrogen free atmosphere, so that a tight coating is formed.

  8. Design of a 3D photonic band gap cavity in a diamond-like inverse woodpile photonic crystal

    CERN Document Server

    Woldering, Léon A; Vos, Willem L

    2014-01-01

    We theoretically investigate the design of cavities in a three-dimensional (3D) inverse woodpile photonic crystal. This class of cubic diamond-like crystals has a very broad photonic band gap and consists of two perpendicular arrays of pores with a rectangular structure. The point defect that acts as a cavity is centred on the intersection of two intersecting perpendicular pores with a radius that differs from the ones in the bulk of the crystal. We have performed supercell bandstructure calculations with up to $5 \\times 5 \\times 5$ unit cells. We find that up to five isolated and dispersionless bands appear within the 3D photonic band gap. For each isolated band, the electric-field energy is localized in a volume centred on the point defect, hence the point defect acts as a 3D photonic band gap cavity. The mode volume of the cavities resonances is as small as 0.8 $\\lambda^{3}$ (resonance wavelength cubed), indicating a strong confinement of the light. By varying the radius of the defect pores we found that o...

  9. Effects of Two Purification Pretreatments on Electroless Copper Coating over Single-Walled Carbon Nanotubes

    OpenAIRE

    Zhong Zheng; Lianjie Li; Shijie Dong; Anchun Xiao; Shixuan Sun; Sinian Li

    2014-01-01

    To achieve the reinforcement of copper matrix composite by single-walled carbon nanotubes, a three-step-refluxing purification of carbon nanotubes sample with HNO3-NaOH-HCl was proposed and demonstrated. A previously reported purification process using an electromagnetic stirring with H2O2/HCl mixture was also repeated. Then, the purified carbon nanotubes were coated with copper by the same electroless plating process. At the end, the effects of the method on carbon nanotubes themselves and o...

  10. Influence of carbon nanotubes coatings onto carbon fiber by oxidative treatments combined with electrophoretic deposition on interfacial properties of carbon fiber composite

    Science.gov (United States)

    Deng, Chao; Jiang, Jianjun; Liu, Fa; Fang, Liangchao; Wang, Junbiao; Li, Dejia; Wu, Jianjun

    2015-12-01

    To improve the interfacial performance of carbon fiber (CF) and epoxy resin, carbon nanotubes (CNTs) coatings were utilized to achieve this purpose through coating onto CF by the treatment with hydrogen peroxide and concentrated nitric acid combined with electrophoretic deposition (EPD) process. The influence of electrophoretically deposited CNTs coatings on the surface properties of CFs were investigated by Fourier transform infrared spectrometer, atomic force microscopy, scanning electron microscopy and dynamic contact angle analysis. The results indicated that the deposition of carbon nanotubes introduced some polar groups to carbon fiber surfaces, enhanced surface roughness and changed surface morphologies of carbon fibers. Surface wettability of carbon fibers may be significantly improved by increasing surface free energy of the fibers due to the deposition of CNTs. The thickness and density of the coatings increases with the introduction of pretreatment of the CF during the EPD process. Short beam shear test was performed to examine the effect of carbon fiber functionalization on mechanical properties of the carbon fiber/epoxy resin composites. The interfacial adhesion of CNTs/CF reinforced epoxy composites showed obvious enhancement of interlaminar shear strength by 60.2% and scanning electron microscope photographs showed that the failure mode of composites was changed after the carbon fibers were coated with CNTs.

  11. Carbon-coated LiFePO4-porous carbon composites as cathode materials for lithium ion batteries.

    Science.gov (United States)

    Ni, Haifang; Liu, Jinkun; Fan, Li-Zhen

    2013-03-07

    This work introduces a facile strategy for the synthesis of carbon-coated LiFePO(4)-porous carbon (C-LiFePO(4)-PC) composites as a cathode material for lithium ion batteries. The LiFePO(4) particles obtained are about 200 nm in size and homogeneously dispersed in porous carbon matrix. These particles are further coated with the carbon layers pyrolyzed from sucrose. The C-LiFePO(4)-PC composites display a high initial discharge capacity of 152.3 mA h g(-1) at 0.1 C, good cycling stability, as well as excellent rate capability (112 mA h g(-1) at 5 C). The likely contributing factors to the excellent electrochemical performance of the C-LiFePO(4)-PC composites could be related to the combined effects of enhancement of conductivity by the porous carbon matrix and the carbon coating layers. It is believed that further carbon coating is a facile and effective way to improve the electrochemical performance of LiFePO(4)-PC.

  12. Studies on non-oxide coating on carbon fibers using plasma enhanced chemical vapor deposition technique

    Science.gov (United States)

    Patel, R. H.; Sharma, S.; Prajapati, K. K.; Vyas, M. M.; Batra, N. M.

    2016-05-01

    A new way of improving the oxidative behavior of carbon fibers coated with SiC through Plasma Enhanced Chemical Vapor Deposition technique. The complete study includes coating of SiC on glass slab and Stainless steel specimen as a starting test subjects but the major focus was to increase the oxidation temperature of carbon fibers by PECVD technique. This method uses relatively lower substrate temperature and guarantees better stoichiometry than other coating methods and hence the substrate shows higher resistance towards mechanical and thermal stresses along with increase in oxidation temperature.

  13. Electrodeposition behavior and characteristics of Ni-carbon nanotube composite coatings

    Institute of Scientific and Technical Information of China (English)

    Sung-Kyu KIM; Tae-Sung OH

    2011-01-01

    Ni-CNT (carbon nanotube) composite coatings were processed by electrodeposition and their hardness and corrosion characteristics were investigated with variations of CNT concentration in an electrolyte solution and electrodeposition current density.With increasing the CNT concentration in the electrodeposition bath and the current density, more CNTs are incorporated into Ni matrix. Hardness values of the Ni-CNT coatings are irrelevant to the CNT concentration in the solution, the current density, and current mode. implying poor adhesion of CNTs to Ni matrix. With increasing the CNT content in the coating, the corrosion resistance of the Ni-CNT composite coating becomes inferior due to the porous microstructure.

  14. MECHANICAL PROPERTIES AND CORROSION PROTECTION OF CARBON STEEL COATED WITH AN EPOXY BASED POWDER COATING CONTAINING MONTMORILONITE FUNCTIONALIZED WITH SILANE

    Directory of Open Access Journals (Sweden)

    Paula Tibola Bertuoli

    2014-06-01

    Full Text Available In the present work the MMT-Na+ clay was functionalized with 3-aminopropyltriethoxysilane (γ-APS and incorporated in a commercial formulation epoxy-based powder coating in a proportion of 8 wt% and applied on 1008 carbon steel panels by electrostatic spray. Adhesion, flexibility, impact and corrosion performance in salt spray chamber tests were performed to evaluate the coatings. The presence of clay did not affect the mechanical properties of the film, however greater subcutaneous migration was assessed after the completion of salt spray testing, which can compromise the use of paints obtained as primers.

  15. Preparation and characterization of dense graphite/glassy carbon composite coating for sealing application

    Science.gov (United States)

    Wang, Yang; Chen, Zhaofeng; Yu, Shengjie; Pan, Ning; Liao, Jiahao

    2017-09-01

    Glassy carbon (GC), characterized by a homogeneous structure and glass-like fracture surface once broken, has attracted increasing attention because of its excellent performance. In this paper, a dense graphite/glassy carbon composite coating with low gas permeability was introduced. In this composite coating, small graphite particles acting as second phase were wrapped by glassy carbon matrix. The composite coatings with different mass fractions of graphite particles were prepared. The mass loss of phenolic resin was determined by TG (thermogravimetry) analysis to determine the pyrolysis process. Raman spectrum analysis indicates that graphite content in composite coatings affected the G/D ratio significantly. The permeability of composite coatings with 50% and 100% graphite particles was almost same, which was ranged from 6  ×  10‑13 m3 · µm/m2 · s · Pa to 3  ×  10‑13 m3 · µm/m2 · s · Pa within the differential pressure from 100 kPa to 70 kPa. While the composite coating with 150% graphite particles had higher gas permeability due to the tiny micro-cracks and micro-pores produced. What was more, the densification mechanism of graphite/glassy carbon composite coating was also discussed in detail.

  16. Tribological properties, corrosion resistance and biocompatibility of magnetron sputtered titanium-amorphous carbon coatings

    Energy Technology Data Exchange (ETDEWEB)

    Dhandapani, Vishnu Shankar [PG & Research Department of Physics, PSG College of Arts & Science, Coimbatore 641 014, Tamil Nadu (India); Center for Nano-Wear, Yonsei University, Seoul 120-749 (Korea, Republic of); Subbiah, Ramesh [Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul 136-791 (Korea, Republic of); Department of Biomedical Engineering, Korea University of Science and Technology (UST), Daejon 305-333 (Korea, Republic of); Thangavel, Elangovan [PG & Research Department of Physics, PSG College of Arts & Science, Coimbatore 641 014, Tamil Nadu (India); Center for Nano-Wear, Yonsei University, Seoul 120-749 (Korea, Republic of); Arumugam, Madhankumar [Center of Research Excellence in Corrosion, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia); Park, Kwideok [Center for Biomaterials, Korea Institute of Science and Technology (KIST), Seoul 136-791 (Korea, Republic of); Department of Biomedical Engineering, Korea University of Science and Technology (UST), Daejon 305-333 (Korea, Republic of); Gasem, Zuhair M. [Center of Research Excellence in Corrosion, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia); Veeraragavan, Veeravazhuthi, E-mail: vv.vazhuthi@gmail.com [PG & Research Department of Physics, PSG College of Arts & Science, Coimbatore 641 014, Tamil Nadu (India); Kim, Dae-Eun, E-mail: kimde@yonsei.ac.kr [Center for Nano-Wear, Yonsei University, Seoul 120-749 (Korea, Republic of); Department of Mechanical Engineering, Yonsei University, Seoul 120-749 (Korea, Republic of)

    2016-05-15

    Highlights: • a-C:Ti nanocomposite coatings were prepared on 316L stainless steel by using R.F. magnetron sputtering method. • Properties of the nanocomposite coatings were analyzed with respect to titanium content. • Corrosion resistance, biocompatibility and hydrophobicity of nanocomposite coating were enhanced with increasing titanium content. • Coating with 2.33 at.% titanium showed superior tribological properties compared to other coatings. - Abstract: Amorphous carbon incorporated with titanium (a-C:Ti) was coated on 316L stainless steel (SS) by magnetron sputtering technique to attain superior tribological properties, corrosion resistance and biocompatibility. The morphology, topography and functional groups of the nanostructured a-C:Ti coatings in various concentrations were analyzed using atomic force microscopy (AFM), Raman, X-Ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Raman and XPS analyses confirmed the increase in sp{sup 2} bonds with increasing titanium content in the a-C matrix. TEM analysis confirmed the composite nature of the coating and the presence of nanostructured TiC for Ti content of 2.33 at.%. This coating showed superior tribological properties compared to the other a-C:Ti coatings. Furthermore, electrochemical corrosion studies were performed against stimulated body fluid medium in which all the a-C:Ti coatings showed improved corrosion resistance than the pure a-C coating. Preosteoblasts proliferation and viability on the specimens were tested and the results showed that a-C:Ti coatings with relatively high Ti (3.77 at.%) content had better biocompatibility. Based on the results of this work, highly durable coatings with good biocompatibility could be achieved by incorporation of optimum amount of Ti in a-C coatings deposited on SS by magnetron sputtering technique.

  17. Voltage assisted asymmetric nanoscale wear on ultra-smooth diamond like carbon thin films at high sliding speeds

    Science.gov (United States)

    Rajauria, Sukumar; Schreck, Erhard; Marchon, Bruno

    2016-01-01

    The understanding of tribo- and electro-chemical phenomenons on the molecular level at a sliding interface is a field of growing interest. Fundamental chemical and physical insights of sliding surfaces are crucial for understanding wear at an interface, particularly for nano or micro scale devices operating at high sliding speeds. A complete investigation of the electrochemical effects on high sliding speed interfaces requires a precise monitoring of both the associated wear and surface chemical reactions at the interface. Here, we demonstrate that head-disk interface inside a commercial magnetic storage hard disk drive provides a unique system for such studies. The results obtained shows that the voltage assisted electrochemical wear lead to asymmetric wear on either side of sliding interface. PMID:27150446

  18. One-dimensional fluid model for an rf methane plasma of interest in deposition of diamond-like carbon layers

    NARCIS (Netherlands)

    Herrebout, D.; Bogaerts, A.; Yan, M.; Gijbels, R.; W. Goedheer,; Dekempeneer, E.

    2001-01-01

    A one-dimensional (1D) model for a methane rf plasma consisting of 20 species (neutrals, radicals, ions, and electrons) is presented. The equations solved are the particle balances, assuming a drift-diffusion approximation for the fluxes, and the electron energy balance equation. The self-consistent

  19. Effect of Magnetic Field on the Deposition of Transparent Diamond-Like Carbon ( DLC ) Films by RF-PCVD

    Institute of Scientific and Technical Information of China (English)

    HOU Hui-jun; ZhU Xia-gao; LIN Song-sheng; YUAN Zhen-hai; DAI Da-huang

    2004-01-01

    In order to deposit transparent and hard DLC films, magnetic field was introduced to enhance the plasma density of radiofrequency plasma chemical vapor deposition (RF-PCVD). In this paper, the configuration and computation of external magnetic field B are introduced. The restriction effect of magnetic field B on the charged particles and the effect of magnetic field B on the primary parameters-nonindependent power Pf and self-bias Uz were also studied. The mechanism of how magnetic field B affects self-bias Uz was analyzed.

  20. Preparation and mechanism of calcium phosphate coatings on chemical modified carbon fibers by biomineralization

    Institute of Scientific and Technical Information of China (English)

    HUANG Su-ping; ZHOU Ke-chao; LI Zhi-you

    2008-01-01

    In order to prepare HA coatings on the carbon fibers, chemical modification and biomineralization processes were applied. The phase components, morphologies, and possible growth mechanism of calcium phosphate were studied by infrared spectroscopy(IR), X-ray diffractometry(XRD) and scanning electron microscopy(SEM). The results show that calcium phosphate coating on carbon fibers can be obtained by biomineralization. But the phase components and morphologies of calcium phosphate coatings are different due to different modification methods. Plate-like CaHPO4-2H2O (DCPD) crystals grow from one site of the active centre by HNO3 treatment. While on the para-aminobenzoic acid treated fibers, the coating is composed of nano-structural HA crystal homogeneously. This is because the -COOH functional groups of para-aminobenzoic acid graft on fibers, with negative charge and arranged structure, accelerating the HA crystal nucleation and crystallization on the carbon fibers.

  1. Carbon coatings with olive oil, soybean oil and butter on nano-LiFePO 4

    Science.gov (United States)

    Kim, Ketack; Jeong, Ji Hwa; Kim, Ick-Jun; Kim, Hyun-Soo

    Kitchen oils (olive, soybean and butter) are selected for carbon coatings on LiFePO 4. The surface properties of LiFePO 4 are unknown or vary depending on synthetic methods. The multi-functional groups of fatty acids in the oils can orient properly to cope with the variable surface properties of LiFePO 4, which can lead to dense carbon coatings. The low price and low toxicity of kitchen oils are other advantages of the coating process. LiFePO 4 (D 50 = 121 nm)combined with the carbon coating enhances the rate capability. Capacities at the 2 C rate reach 150 mAh g -1 or higher. The charge retention values of 2.0 C/0.2 C are between 94.4 and 98.9%.

  2. Scalable nanomanufacturing of surfactant-free carbon nanotube inks for spray coatings with high conductivity

    Institute of Scientific and Technical Information of China (English)

    Colin Preston[1; Da Song[1; Jaiqi Dai[1; Zois Tsinas[2; John Bavier[3; John Cumings[1; Vince Ballarotto[3; Liangbing Hu[1

    2015-01-01

    Spray-coated carbon nanotube films offer a simple and printable solution for fabricating low cost, lightweight, and flexible thin-film electronics. However, current nanotube spray inks require either a disruptive surfactant or destructive surface functionalization to stabilize dispersions at the cost of the electrical properties of the deposited film. We demonstrate that high-purity few-walled carbon nanotubes may be stabilized in isopropanol after surface functionalization and that optimizing the ink stability dramatically enhances the conductivity of subsequent spray-coated thin films. We consequently report a surfactant-free carbon nanotube ink for spray-coated thin films with conductivities reaching 2,100 S/cm. Zeta-potential measurements, used to quantify the nanotube ink dispersion quality, directly demonstrate a positive correlation with the spray- coated film conductivity, which is the key metric for high-performance printed electronics.

  3. Influence of Thermal Shock on the Mechanical Behavior of Si-SiC Coated Carbon/Carbon Composites

    Institute of Scientific and Technical Information of China (English)

    Qiangang Fu; Hejun Li; Yongjie Wang; Kezhi Li; Lu Wei

    2009-01-01

    Si-SiC coating was prepared on the surface of carbon/carbon (C/C) composites by a two-step technique of pack cementation, and the influences of thermal shock between 1773 K and room temperature in air on the mechanical property and fracture behavior of the coated C/C were studied. The results show that, after thermal shock between 1773 K and room temperature for 5, 10 and 15 times, the flexural strength of coated composites increases by 4.29%, 15.00% and 24.20%, respectively. The toughness of the coated C/C enhances gradually during the thermal shock test. The improvement of the mechanical property after the thermal shock test is primarily caused by the weakening of the fiber-matrix interface and the reduction of residual thermal stresses by thermal shock.

  4. Nanocarbon-Coated Porous Anodic Alumina for Bionic Devices

    Directory of Open Access Journals (Sweden)

    Morteza Aramesh

    2015-08-01

    Full Text Available A highly-stable and biocompatible nanoporous electrode is demonstrated herein. The electrode is based on a porous anodic alumina which is conformally coated with an ultra-thin layer of diamond-like carbon. The nanocarbon coating plays an essential role for the chemical stability and biocompatibility of the electrodes; thus, the coated electrodes are ideally suited for biomedical applications. The corrosion resistance of the proposed electrodes was tested under extreme chemical conditions, such as in boiling acidic/alkali environments. The nanostructured morphology and the surface chemistry of the electrodes were maintained after wet/dry chemical corrosion tests. The non-cytotoxicity of the electrodes was tested by standard toxicity tests using mouse fibroblasts and cortical neurons. Furthermore, the cell–electrode interaction of cortical neurons with nanocarbon coated nanoporous anodic alumina was studied in vitro. Cortical neurons were found to attach and spread to the nanocarbon coated electrodes without using additional biomolecules, whilst no cell attachment was observed on the surface of the bare anodic alumina. Neurite growth appeared to be sensitive to nanotopographical features of the electrodes. The proposed electrodes show a great promise for practical applications such as retinal prostheses and bionic implants in general.

  5. Haemocompatibility evaluation of DLC- and SiC-coated surfaces

    Directory of Open Access Journals (Sweden)

    Nurdin N.

    2003-06-01

    Full Text Available Diamond-like carbon (DLC and silicon carbide (SiC coatings are attractive because of low friction coefficient, high hardness, chemical inertness and smooth finish, which they provide to biomedical devices. Silicon wafers (Siwaf and silicone rubber (Sirub plates were coated using plasma-enhanced chemical vapour deposition (PE-CVD techniques. This article describes: 1- the characterization of modified surfaces using attenuated total reflection-Fourier transform infrared spectroscopy (ATR/FTIR and contact angle measurements, 2- the results of three in-vitro haemocompatibility assays. Coated surfaces were compared to uncoated materials and various substrates such as polymethylmethacrylate (PMMA, polyethylene (LDPE, polydimethylsiloxane (PDMS and medical steel (MS. Thrombin generation, blood platelet adhesion and complement convertase activity tests revealed the following classification, from the most to the least heamocompatible surface: Sirub/ DLC-Sirub/ DLC-Siwaf/ LDPE/ PDMS/ SiC-Siwaf/ Siwaf/ PMMA/ MS. The DLC coating surfaces delayed the clotting time, tended to inhibit the platelet and complement convertase activation, whereas SiC-coated silicon wafer can be considered as thrombogenic. This study has taken into account three events of the blood activation: coagulation, platelet activation and inflammation. The response to those events is an indicator of the in vitro haemocompatibility of the different surfaces and it allows us to select biomaterials for further in vivo blood contacting investigations.

  6. Effects of Two Purification Pretreatments on Electroless Copper Coating over Single-Walled Carbon Nanotubes

    Directory of Open Access Journals (Sweden)

    Zhong Zheng

    2014-01-01

    Full Text Available To achieve the reinforcement of copper matrix composite by single-walled carbon nanotubes, a three-step-refluxing purification of carbon nanotubes sample with HNO3-NaOH-HCl was proposed and demonstrated. A previously reported purification process using an electromagnetic stirring with H2O2/HCl mixture was also repeated. Then, the purified carbon nanotubes were coated with copper by the same electroless plating process. At the end, the effects of the method on carbon nanotubes themselves and on copper coating were determined by transmission electron microscope spectroscopy, scanning electron microscope spectroscopy, X-ray diffractometry, thermogravimetric analysis, Fourier transformed infrared spectroscopy, and energy dispersive spectrometry. It was clearly confirmed that both of the two processes could remove most of iron catalyst particles and carbonaceous impurities without significant damage to carbon nanotubes. The thermal stability of the sample purified by H2O2/HCl treatment was slightly higher than that purified by HNO3-NaOH-HCl treatment. Nevertheless, the purification by HNO3-NaOH-HCl treatment was more effective for carboxyl functionalization on nanotubes than that by H2O2/HCl treatment. The Cu-coating on carbon nanotubes purified by both purification processes was complete, homogenous, and continuous. However, the Cu-coating on carbon nanotubes purified by H2O2/HCl was oxidized more seriously than those on carbon nanotubes purified by HNO3-NaOH-HCl treatment.

  7. Preparation of Conductive Coating Solutions by Blending Waterborne Acrylic Polyurethane Dispersion with Carbon Nanotube

    Energy Technology Data Exchange (ETDEWEB)

    Huh, Woo Young; Yun, Dong Gu; Song, Ki Chang [Konyang University, Nonsan (Korea, Republic of)

    2013-02-15

    Waterborne polyurethane dispersion (WPUD) was synthesized from polycarbonate diol (PCD), isophorone diisocyanate (IPDI) and dimethylol propionic acid (DMPA) as starting materials. Then, waterborne acrylic polyurethane dispersion (AUD) was synthesized by reacting the WPUD with an acrylate monomer, methyl methacrylate (MMA). Subsequently, the AUD was mixed with multi-walled carbon nanotube (MWCNT) to yield a conductive coating solution, and the mixture was coated on the polycarbonate substrate. With increasing the amount of MMA in the AUD, the pencil hardness, abrasion resistance and chemical resistance of the coating films were improved, but the electrical conductivity of the coating films was decreased. On the other hand, the pencil hardness, abrasion resistance and chemical resistance of coating films were decreased, but the electrical conductivity was enhanced with increasing the amount of MWCNT in the conductive coating solutions.

  8. 3D collagen scaffolds coated with multiwalled carbon nanotubes: initial cell attachment to internal surface.

    Science.gov (United States)

    Hirata, Eri; Uo, Motohiro; Nodasaka, Yoshinobu; Takita, Hiroko; Ushijima, Natsumi; Akasaka, Tsukasa; Watari, Fumio; Yokoyama, Atsuro

    2010-05-01

    The cell adhesion in a multiwalled carbon nanotube-coated collagen sponge (MWCNT-coated sponge) was investigated. Immediately after seeding, the cells adhered to the inner surface of the MWCNT-coated sponge and a significantly larger number of cells were observed there than for a pure collagen sponge used as control. On the MWCNT-coated sponge, the cells appeared favorable adhesion and spread in the early stages in the center part of the sponge which cells rarely attached without MWCNT-coating. It was suggested that the physical structure of MWCNTs was effective for initial adhesion of cells from the result of serum-free culture. MWCNT-coating makes the material a suitable three-dimensional scaffold for cell culturing, as opposed to other scaffold systems where such an effect is not seen.

  9. Influence of flow rate on different properties of diamond-like nanocomposite thin films grown by PECVD

    Directory of Open Access Journals (Sweden)

    T. S. Santra

    2012-06-01

    Full Text Available Diamond-like nanocomposite (DLN thin films were deposited on pyrex glass substrate using different flow rate of haxamethyldisiloxane (HMDSO based liquid precursor with nitrogen gas as a glow discharged decomposition by plasma enhanced chemical vapor deposition (PECVD technique. The significant influence of different precursor flow rates on refractive index and thickness of the DLN films was measured by using spectroscopic filmatrics and DEKTAK profilometer. Optical transparency of the DLN thin films was analyzed by UV-VIS-NIR spectrometer. FTIR spectroscopy, provides the information about shifted bonds like SiC2, Si-C, Si-O, C-C, Si-H, C-H, N-H, and O-H with different precursor flow rate. We have estimated the hardness of the DLN films from Raman spectroscopy using Gaussian deconvolution method and tried to investigate the correlation between hardness, refractive index and thickness of the films with different precursor flow rates. The composition and surface morphology of the DLN films were investigated by X-ray photo electron spectroscopy (XPS and atomic force microscopy (AFM respectively. We have analyzed the hardness by intensity ratio (ID/IG of D and G peaks and correlates with hardness measurement by nanoindentation test where hardness increases from 27.8 μl/min to 80.6μl/min and then decreases with increase of flow rate from 80.6μl/min to 149.5μl/min. Finally, we correlates different parameters of structural, optical and tribological properties like film-thickness, refractive index, light transmission, hardness, surface roughness, modulus of elasticity, contact angle etc. with different precursor flow rates of DLN films.

  10. Influence of flow rate on different properties of diamond-like nanocomposite thin films grown by PECVD

    Science.gov (United States)

    Santra, T. S.; Bhattacharyya, T. K.; Tseng, F. G.; Barik, T. K.

    2012-06-01

    Diamond-like nanocomposite (DLN) thin films were deposited on pyrex glass substrate using different flow rate of haxamethyldisiloxane (HMDSO) based liquid precursor with nitrogen gas as a glow discharged decomposition by plasma enhanced chemical vapor deposition (PECVD) technique. The significant influence of different precursor flow rates on refractive index and thickness of the DLN films was measured by using spectroscopic filmatrics and DEKTAK profilometer. Optical transparency of the DLN thin films was analyzed by UV-VIS-NIR spectrometer. FTIR spectroscopy, provides the information about shifted bonds like SiC2, Si-C, Si-O, C-C, Si-H, C-H, N-H, and O-H with different precursor flow rate. We have estimated the hardness of the DLN films from Raman spectroscopy using Gaussian deconvolution method and tried to investigate the correlation between hardness, refractive index and thickness of the films with different precursor flow rates. The composition and surface morphology of the DLN films were investigated by X-ray photo electron spectroscopy (XPS) and atomic force microscopy (AFM) respectively. We have analyzed the hardness by intensity ratio (ID/IG) of D and G peaks and correlates with hardness measurement by nanoindentation test where hardness increases from 27.8 μl/min to 80.6μl/min and then decreases with increase of flow rate from 80.6μl/min to 149.5μl/min. Finally, we correlates different parameters of structural, optical and tribological properties like film-thickness, refractive index, light transmission, hardness, surface roughness, modulus of elasticity, contact angle etc. with different precursor flow rates of DLN films.

  11. In situ formation of low friction ceramic coatings on carbon steel by plasma electrolytic oxidation in two types of electrolytes

    Science.gov (United States)

    Wang, Yunlong; Jiang, Zhaohua

    2009-04-01

    In situ formation of ceramic coatings on Q235 carbon steel was achieved by plasma electrolytic oxidation (PEO) in carbonate electrolyte and silicate electrolyte, respectively. The surface and cross-section morphology, phase and elemental composition of PEO coatings were examined by means of scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDS). The bond strength of the coating was determined using a direct pull-off test. The hardness as well as tribological properties of the ceramic coating was primarily studied. The results indicated that the coating obtained in carbonate electrolyte was Fe 3O 4, while the coating achieved from silicate electrolyte was proved to be amorphous. Both kinds of coatings showed coarse and porous surface. The Fe 3O 4 coatings obtained in carbonate electrolyte showed a high bonding strength to the substrate up to 20 ± 2 MPa and the value was 15 ± 2 MPa for the amorphous coatings obtained in carbonate electrolyte. The micro hardness of the amorphous coating and the Fe 3O 4 coating was 1001 Hv and 1413 Hv, respectively, which was more than two and three times as that of the Q235 alloy substrate (415 Hv). The friction coefficient exhibited by amorphous coating and Fe 3O 4 coating was 0.13 and 0.11, respectively, both lower than the uncoated Q235 substrate which ranged from 0.17 to 0.35.

  12. Synthesis and Magnetic Properties of Ni and Carbon Coated Ni by Levitational Gas Condensation (LGC

    Directory of Open Access Journals (Sweden)

    Young Rang Uhm

    2013-01-01

    Full Text Available The nickel (Ni, and carbon coated nickel (Ni@C nanoparticles were synthesized by levitaional gas condensation (LGC methods using a micron powder feeding (MPF system. Both metal and carbon coated metal nano powders include a magnetic ordered phase. The synthesis by LGC yields spherical particles with a large coercivity. The abnormal initial magnetization curve for Ni indicates a non-collinear magnetic structure between the core and surface layer of the particles. The carbon coated particles had a core structure diameter at and below 10 nm and were covered by 2-3 nm thin carbon layers. The hysteresis loop of the as-prepared Ni@Cs materials with unsaturated magnetization shows a superparamagnetic state at room temperature.

  13. Carbon coatings for extreme-ultraviolet high-order laser harmonics

    Energy Technology Data Exchange (ETDEWEB)

    Coraggia, S.; Frassetto, F. [CNR-Institute of Photonics and Nanotechnologies, Laboratory for UV and X-Ray Optical Research, via Trasea 7, 35131 Padova (Italy); Aznarez, J.A.; Larruquert, J.I.; Mendez, J.A. [GOLD-Instituto de Optica-Consejo Superior de Investigaciones Cientificas, Serrano 144, 28006 Madrid (Spain); Negro, M.; Stagira, S.; Vozzi, C. [Department of Physics-Politecnico of Milano and CNR-Institute of Photonics and Nanotechnologies, Piazza Leonardo Da Vinci 32, 20133 Milano (Italy); Poletto, L., E-mail: poletto@dei.unipd.i [CNR-Institute of Photonics and Nanotechnologies, Laboratory for UV and X-Ray Optical Research, via Trasea 7, 35131 Padova (Italy)

    2011-04-11

    The experimental study of the optical properties of thin carbon films to be used as grazing-incidence coatings for extreme-ultraviolet high-order harmonics is presented. The carbon samples were deposited on plane glass substrates by the electron beam evaporation technique. The optical constants (real and imaginary parts of the refraction index) have been calculated through reflectivity measurements. The results are in good agreement with what reported in the literature, and confirm that carbon-coated optics operated at grazing incidence have a remarkable gain over conventional metallic coatings in the extreme ultraviolet. Since the harmonics co-propagate with the intense infrared laser generating beam, the carbon damage threshold when exposed to ultrashort infrared laser pulses has been measured.

  14. Recent progress in the synthesis and characterization of amorphous and crystalline carbon nitride coatings

    CERN Document Server

    Widlow, I

    2000-01-01

    This review summarizes our most recent findings in the structure and properties of amorphous and crystalline carbon nitride coatings, synthesized by reactive magnetron sputtering. By careful control of the plasma conditions via proper choice of process parameters such as substrate bias, target power and gas pressure, one can precisely control film structure and properties. With this approach, we were able to produce amorphous carbon nitride films with controlled hardness and surface roughness. In particular, we can synthesize ultrathin (1 nm thick) amorphous carbon nitride films to be sufficiently dense and uniform that they provide adequate corrosion protection for hard disk applications. We demonstrated the strong correlation between ZrN (111) texture and hardness in CN sub x /ZrN superlattice coatings. Raman spectroscopy and near-edge X-ray absorption show the predominance of sp sup 3 -bonded carbon in these superlattice coatings.

  15. Experimental lumbar spine fusion with novel tantalum-coated carbon fiber implant

    DEFF Research Database (Denmark)

    Li, Haisheng; Zou, Xuenong; Woo, Charlotte

    2007-01-01

    the possibility of coating a biocompatible metal layer on top of the carbon fiber material, to improve its biological performance. Tantalum was chosen because of its bone compatibility, based on our previous studies. A novel spinal fusion cage was fabricated by applying a thin tantalum coating on the surface...... of carbon-carbon composite material through chemical vapor deposition. Mechanical and biological performance was tested in vitro and in vivo. Compress strength was found to be 4.9 kN (SD, 0.2). Fatigue test with 500,000 cycles was passed. In vitro radiological evaluation demonstrated good compatibility...... and newly formed bone. No inflammatory cells were found around the implant. Cages packed with two different graft materials (autograft and COLLOSS) achieved the same new bone formation. The present study proved that coating tantalum on top of the carbon-based implant is feasible, and good bone integration...

  16. Tribological properties, corrosion resistance and biocompatibility of magnetron sputtered titanium-amorphous carbon coatings

    Science.gov (United States)

    Dhandapani, Vishnu Shankar; Subbiah, Ramesh; Thangavel, Elangovan; Arumugam, Madhankumar; Park, Kwideok; Gasem, Zuhair M.; Veeraragavan, Veeravazhuthi; Kim, Dae-Eun

    2016-05-01

    Amorphous carbon incorporated with titanium (a-C:Ti) was coated on 316L stainless steel (SS) by magnetron sputtering technique to attain superior tribological properties, corrosion resistance and biocompatibility. The morphology, topography and functional groups of the nanostructured a-C:Ti coatings in various concentrations were analyzed using atomic force microscopy (AFM), Raman, X-Ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Raman and XPS analyses confirmed the increase in sp2 bonds with increasing titanium content in the a-C matrix. TEM analysis confirmed the composite nature of the coating and the presence of nanostructured TiC for Ti content of 2.33 at.%. This coating showed superior tribological properties compared to the other a-C:Ti coatings. Furthermore, electrochemical corrosion studies were performed against stimulated body fluid medium in which all the a-C:Ti coatings showed improved corrosion resistance than the pure a-C coating. Preosteoblasts proliferation and viability on the specimens were tested and the results showed that a-C:Ti coatings with relatively high Ti (3.77 at.%) content had better biocompatibility. Based on the results of this work, highly durable coatings with good biocompatibility could be achieved by incorporation of optimum amount of Ti in a-C coatings deposited on SS by magnetron sputtering technique.

  17. Carbon nanotube-coated silicone as a flexible and electrically conductive biomedical material

    Energy Technology Data Exchange (ETDEWEB)

    Matsuoka, Makoto, E-mail: matsuoka@den.hokudai.ac.jp [Department of Oral and Maxillofacial Surgery, Graduate School of Dental Medicine, Hokkaido University, Kita 13 Nishi 7, Kita-ku, Sapporo 060-8586 (Japan); Japan Society for the Promotion of Science (Japan); Akasaka, Tsukasa [Department of Dental Materials and Engineering, Graduate School of Dental Medicine, Hokkaido University, Kita 13 Nishi 7, Kita-ku, Sapporo 060-8586 (Japan); Totsuka, Yasunori [Department of Oral and Maxillofacial Surgery, Graduate School of Dental Medicine, Hokkaido University, Kita 13 Nishi 7, Kita-ku, Sapporo 060-8586 (Japan); Watari, Fumio [Department of Dental Materials and Engineering, Graduate School of Dental Medicine, Hokkaido University, Kita 13 Nishi 7, Kita-ku, Sapporo 060-8586 (Japan)

    2012-04-01

    Artificial cell scaffolds that support cell adhesion, growth, and organization need to be fabricated for various purposes. Recently, there have been increasing reports of cell patterning using electrical fields. We fabricated scaffolds consisting of silicone sheets coated with single-walled (SW) or multi-walled (MW) carbon nanotubes (CNTs) and evaluated their electrical properties and biocompatibility. We also performed cell alignment with dielectrophoresis using CNT-coated sheets as electrodes. Silicone coated with 10 {mu}g/cm{sup 2} SWCNTs exhibited the least sheet resistance (0.8 k{Omega}/sq); its conductivity was maintained even after 100 stretching cycles. CNT coating also improved cell adhesion and proliferation. When an electric field was applied to the cell suspension introduced on the CNT-coated scaffold, the cells became aligned in a pearl-chain pattern. These results indicate that CNT coating not only provides electro-conductivity but also promotes cell adhesion to the silicone scaffold; cells seeded on the scaffold can be organized using electricity. These findings demonstrate that CNT-coated silicone can be useful as a biocompatible scaffold. - Highlights: Black-Right-Pointing-Pointer We fabricated a CNT-coated silicone which has conductivity and biocompatibility. Black-Right-Pointing-Pointer The conductivity was maintained after 100 cycles of stretching. Black-Right-Pointing-Pointer CNT coatings enabled C2C12 cells adhere to the silicone surface. Black-Right-Pointing-Pointer Cells were aligned with dielectrophoresis between CNT-coated silicone surfaces.

  18. Effects of a carbon nanotube-collagen coating on a titanium surface on osteoblast growth

    Science.gov (United States)

    Park, Jung Eun; Park, Il-Song; Neupane, Madhav Prasad; Bae, Tae-Sung; Lee, Min-Ho

    2014-02-01

    This study was performed to evaluate the effect of collagen-multi-walled carbon nanotubes (MWCNTs) composite coating deposited on titanium on osteoblast growth. Titanium samples coated with only collagen and MWCNTs were used as controls. Pure titanium was coated with collagen-MWCNTs composite coating with 5, 10 and 20 μg cm-2 MWCNTs by dip coating method. Scanning probe microscopy, field emission scanning electron microscopy, transmission electron microscopy and Fourier transform infrared spectroscopy were used to ascertain the root mean squared roughness, structural and morphological features and, the interaction between the collagen and the MWCNTs, respectively. The biocompatibility of the collagen-MWCNTs composite coated Ti was assessed by MTT and ALP activity assays after culturing the cells for 2 and 5 days. The study reveals that root mean squared surface roughness of collagen-MWCNTs composite coated titanium is relatively higher than those of collagen and MWCNTs coated Ti. There is a strong interaction between the MWCNTs and the collagen, which is supported by the inferences made in FE-SEM and TEM studies and further confirmed by FT-IR spectra. Among all the specimens tested, cell proliferation is relatively higher on collagen-MWCNTs composite coated Ti specimen incorporated with 20 μg cm-2 of MWCNTs (p collagen-MWCNTs composite coated Ti specimens is considered responsible for the relatively higher extent of cell proliferation. The MWCNTs incorporated in the composite could have also contributed to the cell viability and growth.

  19. Erosion and Modifications of Tungsten-Coated Carbon and Copper Under High Heat Flux

    Institute of Scientific and Technical Information of China (English)

    Liu Xiang(刘翔); S.Tamura; K.Tokunaga; N.Yoshida; Zhang Fu(张斧); Xu Zeng-yu(许增裕); Ge Chang-chun(葛昌纯); N.Noda

    2003-01-01

    Tungsten-coated carbon and copper was prepared by vacuum plasma spraying (VPS)and inert gas plasma spraying (IPS), respectively. W/CFC (Tungsten /Carbon Fiber-Enhancedmaterial) coating has a diffusion barrier that consists of W and Re multi-layers pre-deposited byphysical vapor deposition on carbon fiber-enhanced materials, while W/Cu coating has a gradedtransition interface. Different grain growth processes of tungsten coatings under stable and tran-sient heat loads were observed, their experimental results indicated that the recrystallizing tem-perature of VPS-W coating was about 1400 ℃ and a recrystallized columnar layer of about 30μmthickness was formed by cyclic heat loads of 4 ms pulse duration. Erosion and modifications ofW/CFC and W/Cu coatings under high heat load, such as microstructure changes of interface,surface plastic deformations and cracks, were investigated, and the erosion mechanism erosionproducts) of these two kinds of tungsten coatings under high heat flux was also studied.

  20. Recent Advances in Disordered and Nanostructured Carbon Coatings for Superl Ubricity and Wearless Sliding

    Institute of Scientific and Technical Information of China (English)

    ALI Erdemir

    2004-01-01

    Increasingly more demanding and very stringent operating conditions envisioned for future mechanical and tribological systems will certainly require new materials and coatings that are superhard and at the same time self-lubricating.For example, dry machining is a much desired practice in manufacturing sector, but it is currently very difficult to realize mainly because of high friction and severe wear losses. However, recent advances in surface engineering and coating technologies may enable design and production of novel coatings architectures that can combine superhardness with self-lubricating properties in both the disordered or nanostructured forms. Recently developed nearly frictionless carbon films, ultrananocrystalline diamond and carbide derived carbon films can dramatically lower friction and at the same time reduce wear under very harsh sliding conditions. These coatings can be formulated in such a way that they can substantially increase the load-bearing capacity of sliding surfaces and hence improve their resistance to scuffing. It is also possible to design nano-composite coatings that can form self-replenishing and-lubricating tribofilms on their sliding surfaces and thus help increase the overall lubricity of these surfaces. In this paper, an overview of recent advances in disordered and nanostructured carbon films will be presented. Specific examples will be given to demonstrate the superior performance and durability of such novel coatings under a very wide range of tribological conditions. The major emphasis is placed on super low friction carbon films. The fundamental tribological mechanisms that control their exceptional friction and wear behaviors are also discussed.

  1. Catalytic graphitization of polyacrylonitrile-based carbon fibers coated with Prussian blue

    Institute of Scientific and Technical Information of China (English)

    PENG Qi-ling; ZHOU Hai-hui; HUANG Zhen-hua; CHEN Jin-hua; KUANG Ya-fei

    2010-01-01

    Prussian blue(PB)was used as catalyst to improve the extent of graphitization of polyacrylonitrile(PAN)-based carbon fibers.PB was deposited on carbon fibers by anodic electrodeposition and the thickness of PB coating(PB content)was controlled by adjusting the electrodeposition time.PAN-based carbon fibers with PB coating were heat-treated and the extent of graphitization was measured by X-ray diffractometry and Raman spectroscopy.The results indicate that the extent of graphitization of PAN-based carbon fibers is enhanced in the presence of the coating.When the PB-coated carbon fibers were heat-treated at 1 900 ℃,interlayer spacing(d002)and crystallite size(Lc)reach 0.336 8 and 21.2 nm respectively.Contrarily,the values of d002 and Lc are 0.341 4 and7.4 nm respectively when the bare carbon fibers were heat-treated at 2 800℃.Compared with the bare carbon fibers,PB can make the heat treatment temperature(HTT)drop more than 500 ℃ in order to reach the same extent of graphitization.Furthermore,the research results show that PB content also has a certain influence on the extent of graphitization at the same HTT.

  2. Visual and reversible carbon dioxide sensing enabled by doctor blade coated macroporous photonic crystals.

    Science.gov (United States)

    Lin, Yi-Han; Suen, Shing-Yi; Yang, Hongta

    2017-11-15

    With significant impacts of carbon dioxide on global climate change, carbon dioxide sensing is of great importance. However, most of the existing sensing technologies are prone to interferences from carbon monoxide, or suffer from the use of sophisticated instruments. This research reports the development of reproducible carbon dioxide sensor using roll-to-roll compatible doctor blade coated three-dimensional macroporous photonic crystals. The pores are functionalized with amine groups to allow the reaction with carbon dioxide in the presence of humidity. The adsorption of carbon dioxide leads to red-shift and amplitude reduction of the optical stop bands, resulting in carbon dioxide detection with visible readout. The dependences of the diffraction wavelength on carbon dioxide partial pressure for various amine-functionalized photonic crystals and different humidities in the environment are systematically investigated. In addition, the reproducibility of carbon dioxide sensing has also been demonstrated in this research. Copyright © 2017 Elsevier Inc. All rights reserved.

  3. Coating of graphite flakes with MgO/carbon nanocomposite via gas state reaction

    Energy Technology Data Exchange (ETDEWEB)

    Sharif, M., E-mail: Sharif_m@metaleng.iust.ac.i [Iran University of Science and Technology, Tehran (Iran, Islamic Republic of); Faghihi-Sani, M.A. [Sharif University of Technology, Tehran (Iran, Islamic Republic of); Golestani-Fard, F. [Iran University of Science and Technology, Tehran (Iran, Islamic Republic of); Saberi, A. [Tabriz University (Iran, Islamic Republic of); Soltani, Ali Khalife [Iran University of Science and Technology, Tehran (Iran, Islamic Republic of)

    2010-06-18

    Coating of graphite flakes with MgO/carbon nanocomposite was carried out via gaseous state reaction between mixture of Mg metal, CO gas and graphite flakes at 1000 {sup o}C. XRD and FE-SEM analysis of coating showed that the coating was comprised of MgO nano particles and amorphous carbon distributed smoothly and covered the graphite surface evenly. Thermodynamic calculations were employed to predict the reaction sequences as well as phase stability. The effect of coating on water wettability and oxidation resistance of graphite was studied using contact angle measurement and TG analysis, respectively. It was demonstrated that the reaction between Mg and CO could result in MgO/C nanocomposite deposition. The coating improved water wettability of graphite and also enhanced the oxidation resistance of graphite flakes significantly. Also the graphite coating showed significant phenolic resin-wettabilty owing to high surface area of such hydrophilic nano composite coating. The importance of graphite coating is explained with emphasis on its potential application in graphite containing refractories.

  4. Mineral-Based Coating of Plasma-Treated Carbon Fibre Rovings for Carbon Concrete Composites with Enhanced Mechanical Performance

    Science.gov (United States)

    Schneider, Kai; Lieboldt, Matthias; Liebscher, Marco; Fröhlich, Maik; Hempel, Simone; Butler, Marko; Schröfl, Christof; Mechtcherine, Viktor

    2017-01-01

    Surfaces of carbon fibre roving were modified by means of a low temperature plasma treatment to improve their bonding with mineral fines; the latter serving as an inorganic fibre coating for the improved mechanical performance of carbon reinforcement in concrete matrices. Variation of the plasma conditions, such as gas composition and treatment time, was accomplished to establish polar groups on the carbon fibres prior to contact with the suspension of mineral particles in water. Subsequently, the rovings were implemented in a fine concrete matrix and their pull-out performance was assessed. Every plasma treatment resulted in increased pull-out forces in comparison to the reference samples without plasma treatment, indicating a better bonding between the mineral coating material and the carbon fibres. Significant differences were found, depending on gas composition and treatment time. Microscopic investigations showed that the samples with the highest pull-out force exhibited carbon fibre surfaces with the largest areas of hydration products grown on them. Additionally, the coating material ingresses into the multifilament roving in these specimens, leading to better force transfer between individual carbon filaments and between the entire roving and surrounding matrix, thus explaining the superior mechanical performance of the specimens containing appropriately plasma-treated carbon roving. PMID:28772719

  5. Table sugar as preparation and carbon coating reagent for facile synthesis and coating of rod-shaped MnO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Hashem, Ahmed M., E-mail: ahmedh242@yahoo.co [National Research Centre, Inorganic Chemistry Department, Behoes St., Dokki, Cairo (Egypt); Abuzeid, Hanaa M. [National Research Centre, Inorganic Chemistry Department, Behoes St., Dokki, Cairo (Egypt); Nikolowski, Kristian; Ehrenberg, Helmut [Institute for Complex Materials, IFW Dresden, Helmholtzstr. 20, D-01069 Dresden (Germany)

    2010-05-14

    Rod-shaped {alpha}-MnO{sub 2} has been synthesized by a novel and facile wet chemical method using simple sugar and potassium permanganate. Redox reaction between KMnO{sub 4} and sucrose is carried out in an acidic medium. Acidic medium provides a reducing character to sucrose through its decomposition to elemental carbon. Carbon coating process was done using simple sugar also as a source for carbon in an absolute ethanol with heating the mixture of {alpha}-MnO{sub 2} and sugar at 350 {sup o}C for an hour in an ambient atmosphere. A single phase of cryptomelane-like phase MnO{sub 2} was observed from XRD patterns for bare and carbon coated samples. TGA analysis shows the presence of carbon layer through more weight loss percent of carbon coated sample in comparison with that of carbon free MnO{sub 2}. Both virgin and carbon coated MnO{sub 2} have high thermal stability due to high percent of K inside the tunnel determined from ICP analysis. Transmission Electron Microscope (TEM) showed a rod-shaped crystal for both the parent and carbon coated {alpha}-MnO{sub 2} and confirmed the presence of a thin film of carbon around MnO{sub 2} particles. Both XRD and TEM investigations show that the prepared powders are in nano-scale. Initial capacity of about 140 mAh/g was obtained for the parent and carbon coated samples. The results show also that carbon coating process improves the capacity retention and the efficiency of {alpha}-MnO{sub 2} in comparison with that carbon free sample.

  6. The effect of rapid thermal annealing on characteristics of carbon coatings on optical fibers

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Jen-Feng; Chen, Tsuen-Sung; Lin, Hung-Chien; Shiue, Sham-Tsong [Department of Materials Science and Engineering, National Chung Hsing University, Taichung (China)

    2010-02-15

    Carbon films are deposited on silica glass fibers by radio-frequency plasma-enhanced chemical vapor deposition (rf-PECVD), and the properties of these optical fibers are improved by rapid thermal annealing. The annealing temperatures are set to 100, 200, 300, 400, 500, 550, 600, and 700 C. Experimental results show that the thickness and surface roughness of carbon films decrease with increasing annealing temperature, ranging from as-deposited to 500 C, while the sp{sup 2} carbon bonding, sp{sup 3} CH{sub 3} bonding, optical bandgap, and water contact angle (CA) of carbon films increase. As the annealing temperature increases from 550 to 700 C, parts of the carbon films are delaminated. The sp{sup 3} CH{sub 3} bonding in carbon films is shifted to the sp{sup 3} CH{sub 2} bonding, and the sp{sup 3} CH{sub 2} bonding is subsequently transferred to the sp{sup 2} CH bonding. Meanwhile, the amount of the sp{sup 2} carbon bonding in carbon films increases, while the optical bandgap decreases. Based on the evaluation of water repellency and low-temperature morphology of carbon films, the carbon film annealed at a temperature of 500 C is the best for production of carbon-coated optical fibers. As compared to conventional thermal annealing (CTA), rapid thermal annealing (RTA) is more effective to improve the properties of carbon-coated optical fibers. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  7. Multiple-diffusion flame synthesis of pure anatase and carbon-coated titanium dioxide nanoparticles

    KAUST Repository

    Memon, Nasir

    2013-09-01

    A multi-element diffusion flame burner (MEDB) is useful in the study of flame synthesis of nanomaterials. Here, the growth of pure anatase and carbon-coated titanium dioxide (TiO2) using an MEDB is demonstrated. Hydrogen (H2), oxygen (O2), and argon (Ar) are utilized to establish the flame, whereas titanium tetraisopropoxide is used as the precursor for TiO2. The nanoparticles are characterized using high-resolution transmission electron microscopy, with elemental mapping (of C, O, and Ti), X-ray diffraction, Raman spectroscopy, and thermogravimetric analysis. The growth of pure anatase TiO2 nanoparticles occurs when Ar and H2 are used as the precursor carrier gas, while the growth of carbon-coated nanoparticles ensues when Ar and ethylene (C2H4) are used as the precursor carrier gas. A uniform coating of 3-5nm of carbon is observed around TiO2 particles. The growth of highly crystalline TiO2 nanoparticles is dependent on the gas flow rate of the precursor carrier and amorphous particles are observed at high flow rates. Carbon coating occurs only on crystalline nanoparticles, suggesting a possible growth mechanism of carbon-coated TiO2 nanoparticles. © 2013 The Combustion Institute.

  8. Mesoporous hollow nanospheres consisting of carbon coated silica nanoparticles for robust lithium-ion battery anodes

    Science.gov (United States)

    An, Weili; Fu, Jijiang; Su, Jianjun; Wang, Lei; Peng, Xiang; Wu, Kai; Chen, Qiuyun; Bi, Yajun; Gao, Biao; Zhang, Xuming

    2017-03-01

    SiO2 as lithium ion batteries (LIBs) anode has drawn considerable attentions because of its low cost, high theoretical specific capacity and low discharge potentials but been limited by its low conductivity and electrochemical kinetics, resulting in obvious capacity decay and poor rate performance. Herein, we developed a simple approach to synthesize mesoporous hollow nanosphere (MHSiO2@C) assembled by conformal carbon coating tiny silica nanoparticles through chemical polymerization of dopamine inside the shell of MHSiO2. The continuous carbon can conformally coat on the surface of all primary SiO2 nanoparticles in the shell, which not only enhances the conductivity but also improves the structural stability of the MHSiO2. Compared to raw MHSiO2 and non-conformal carbon coated MHSiO2, the MHSiO2@C demonstrate a high reversible capacity of 440.7 mA h g-1 at a current density of 0.5 A g-1 after 500 cycles and excellent rate performance due to synergetic effect of special structure of MHSiO2 and carbon conformal coating on each silica nanoparticle. Such a special structure will be a promising platform for LIBs. Significantly, this paper offers a direct evidence to prove the advantage of conformal carbon coating and provides consequentially guide in improving the energy storage performance of low-conductivity oxide based electrode materials.

  9. Characterization of microstructure and mechanical behavior of sputter deposited Ti-containing amorphous carbon coatings.

    Energy Technology Data Exchange (ETDEWEB)

    Feng, B.; Cao, D. M.; Meng, W. J.; Xu, J.; Tittsworth, R. C.; Rehn, L. E.; Baldo, P. M.; Doll, G. L.; Materials Science Division; Louisiana State Univ.; The Timken Company

    2001-12-03

    We report on the characterization of microstructure and mechanical properties of sputter deposited Ti-containing amorphous carbon (Ti-aC) coatings as a function of Ti composition. Ti-aC coatings have been deposited by unbalanced magnetron sputter deposition, in an industrial-scale four-target coating deposition system. The composition and microstructure of the Ti-aC coatings have been characterized in detail by combining the techniques of Rutherford backscattering spectrometry (RBS) and hydrogen elastic recoil detection (ERD), transmission electron microscopy (TEM), X-ray absorption near edge structure (XANES) spectroscopy and extended X-ray absorption fine structure (EXAFS) spectroscopy. At Ti compositions <4at.%, Ti atoms dissolve in an amorphous carbon (a-C) matrix. The dissolution limit of Ti atoms in an a-C matrix is determined to be between 4 and 8 at.%. At Ti compositions >8 at.%, XANES and EXAFS data indicate that the average Ti atomic bonding environment in Ti-aC coatings resembles that in cubic B1-TiC, consistent with TEM observation of precipitation of TiC nanocrystallites in the a-C matrix. Beyond the Ti dissolution limit, the Ti-aC coatings are nanocomposites with nanocrystalline TiC clusters embedded in an a-C matrix. A large scale, quasi one-dimensional composition modulation in the Ti-aC coatings was observed due to the particular coating deposition geometry. Elastic stiffness and hardness of the Ti-aC coatings were measured by instrumented nanoindentation and found to vary systematically as a function of Ti composition. Unlubricated friction coefficient of Ti-aC coatings against WC-Co balls was found to increase as the Ti composition increases. As Ti composition increases, the overall mechanical behavior of the Ti-aC coatings becomes more TiC-like.

  10. Quantitative Image Analysis of Ni-P Coatings Deposited on Carbon Fibers

    Science.gov (United States)

    Kozera, R.; Bucki, J. J.; Sałacińska, A.; Bieliński, J.; Boczkowska, A.

    2015-09-01

    In this work, polyacrylonitrile (PAN)-based carbon fibers coated with different thicknesses of Ni-P coatings were studied. The coatings were deposited by electroless metallization lasting from 3 to 22 min and consisted of approximately 3 wt.% phosphorous. Computer quantitative image analysis was used to characterize the surface features and thickness of the coatings as a function of the time of metallization. The results showed that quantitative image analysis is a useful technique for the measurement of the coating thickness and can be used as a tool for obtaining an innovative description of the Ni-P coating morphology. The morphology of the coatings and their thicknesses were investigated by scanning electron microscopy. The image analyses were performed using the proprietary software Micrometer, developed at the Faculty of Materials Science and Engineering, Warsaw University of Technology. The observations revealed that a specific feature of the coating topography is the hemispherical bulge of a diameter ranging from 0.1 to 10 μm. The thickness of the coatings increases linearly with the metallization time. The obtained results indicated that the methodology proposed in the present work can be successfully applied and possesses several advantages over the traditionally used weight measurements technique.

  11. Functionalization and Area-Selective Deposition of Magnetic Carbon-Coated Iron Nanoparticles from Solution

    Directory of Open Access Journals (Sweden)

    Erika Widenkvist

    2011-01-01

    Full Text Available A route to area-selective deposition of carbon-coated iron nanoparticles, involving chemical modification of the surface of the particles, is described. Partial oxidative etching of the coating introduces carboxylic groups, which then are esterified. The functionalized particles can be selectively deposited on the Si areas of Si/SiO2 substrates by a simple dipping procedure. Nanoparticles and nanoassemblies have been analyzed using SEM, TEM, and XPS.

  12. Dynamic Response of Tapered Optical Multimode Fiber Coated with Carbon Nanotubes for Ethanol Sensing Application

    OpenAIRE

    2015-01-01

    Ethanol is a highly combustible chemical universally designed for biomedical applications. In this paper, optical sensing performance of tapered multimode fiber tip coated with carbon nanotube (CNT) thin film towards aqueous ethanol with different concentrations is investigated. The tapered optical multimode fiber tip is coated with CNT using drop-casting technique and is annealed at 70 °C to enhance the binding of the nanomaterial to the silica fiber tip. The optical fiber tip and the CNT se...

  13. Nine years of carbon coating development for the SPS upgrade: achievements and heritage.

    CERN Document Server

    Taborelli, Mauro; Costa Pinto, Pedro; Cruikshank, Paul

    2015-01-01

    CERN has succeeded in producing carbon coatings that eradicate electron cloud in accelerators without any beam conditioning or in situ heating. Investing about 1 MCHF and dedicating 31 FTE (28 man-years, staff and associate members) in 9 years in the framework of LIU-SPS, CERN has increased: technological competences in thin-film coatings, worldwide visibility in surface characterisation, and capability in electron cloud measurement. Future projects are still benefiting from such an investment.

  14. Raman Spectroscopy Characterization of amorphous carbon coatings for computer hard disks

    OpenAIRE

    Ager III, Joel W.

    1998-01-01

    Amorphous carbon films are used as protective coatings on magnetic media to protect the magnetic layer from wear and abrasion caused by the read/write head during hard disk drive start-up and operation. A key requirement in increasing the storage capacity and reliability of hard-disk drives is improving the performance of these coatings. This cooperative agreement used optical characterization techniques developed at LBNL to study thin-film hard disk media produced by Seagate Technology...

  15. Porous carbon-coated graphite electrodes for energy production from salinity gradient using reverse electrodialysis

    Science.gov (United States)

    Lee, Su-Yoon; Jeong, Ye-Jin; Chae, So-Ryong; Yeon, Kyeong-Ho; Lee, Yunkyu; Kim, Chan-Soo; Jeong, Nam-Jo; Park, Jin-Soo

    2016-04-01

    Performance of graphite foil electrodes coated by porous carbon black (i.e., Vulcan) was investigated in comparison with metal electrodes for reverse electrodialysis (RED) application. The electrode slurry that was used for fabrication of the porous carbon-coated graphite foil is composed of 7.2 wt% of carbon black (Vulcan X-72), 0.8 wt% of a polymer binder (polyvinylidene fluoride, PVdF), and 92.0 wt% of a mixing solvent (dimethylacetamide, DMAc). Cyclic voltammograms of both the porous carbon (i.e., Vulcan)-coated graphite foil electrode and the graphite foil electrode without Vulcan showed good reversibility in the hexacyanoferrate(III) (i.e., Fe(CN)63-) and hexacyanoferrate(II) (i.e., Fe(CN)64-) redox couple and 1 M Na2SO4 at room temperature. However, anodic and cathodic current of the Vulcan-coated graphite foil electrode was much higher than those of the graphite foil electrode. Using a bench-scale RED stack, the current-voltage polarization curve of the Vulcan-coated graphite electrode was compared to that of metal electrodes such as iridium (Ir) and platinum (Pt). From the results, it was confirmed that resistance of four different electrodes increased with the following order: the Vulcan-coated graphite foilVulcan-coated graphite foil showed 5-10% higher power density than the metal mesh electrodes. From the polarization curve of the Vulcan-coated graphite foil electrode, it was found that total resistance decreased as thickness and geometric surface area of the electrode increased.

  16. Multiwalled carbon nanotubes coating accelerates osteoconductivity of anodized titanium [an abstract of entire text

    OpenAIRE

    井上, 沙織

    2014-01-01

    Because of their excellent mechanical, electrical and biocompatible properties, multiwalled carbon nanotubes (MWCNTs) are employed for tissue engineering. Recent studies have also revealed that CNTs provide a preferable surface for cell adhesion and growth. Osteoblast-like cells adhere well and grow on the MWCNT-coated collagen sponge better than on the non-coated sponge. On the other hand, ti tanium is commonly used as a biomaterial for dental implants because of its excellent mechanical and...

  17. Pyrolytic deposition of nanostructured titanium carbide coatings on the surface of multiwalled carbon nanotubes

    Science.gov (United States)

    Kremlev, K. V.; Ob"edkov, A. M.; Ketkov, S. Yu.; Kaverin, B. S.; Semenov, N. M.; Gusev, S. A.; Tatarskii, D. A.; Yunin, P. A.

    2016-05-01

    Nanostructured titanium carbide coatings have been deposited on the surface of multiwalled carbon nanotubes (MWCNTs) by the MOCVD method with bis(cyclopentadienyl)titanium dichloride precursor. The obtained TiC/MWCNT hybrid materials were characterized by X-ray diffraction, scanning electron microscopy, and high-resolution transmission electron microscopy. It is established that a TiC coating deposits onto the MWCNT surface with the formation of a core-shell (MWSNT-TiC) type structure.

  18. Nine years of carbon coating development for the SPS upgrade: achievements and heritage.

    CERN Document Server

    Taborelli, Mauro; Costa Pinto, Pedro; Cruikshank, Paul

    2015-01-01

    CERN has succeeded in producing carbon coatings that eradicate electron cloud in accelerators without any beam conditioning or in situ heating. Investing about 1 MCHF and dedicating 31 FTE (28 man-years, staff and associate members) in 9 years in the framework of LIU-SPS, CERN has increased: technological competences in thin-film coatings, worldwide visibility in surface characterisation, and capability in electron cloud measurement. Future projects are still benefiting from such an investment.

  19. Surface functionalization of carbon nanofibers by sol-gel coating of zinc oxide

    Energy Technology Data Exchange (ETDEWEB)

    Shao Dongfeng [Key Laboratory of Eco-textiles, Ministry of Education, Jiangnan University, Wuxi 214122 (China); Changzhou Textile Garment Institute, Changzhou 213164 (China); Wei Qufu [Key Laboratory of Eco-textiles, Ministry of Education, Jiangnan University, Wuxi 214122 (China)], E-mail: qfwei@jiangnan.edu.cn; Zhang Liwei; Cai Yibing; Jiang Shudong [Key Laboratory of Eco-textiles, Ministry of Education, Jiangnan University, Wuxi 214122 (China)

    2008-08-15

    In this paper the functional carbon nanofibers were prepared by the carbonization of ZnO coated PAN nanofibers to expand the potential applications of carbon nanofibers. Polyacrylonitrile (PAN) nanofibers were obtained by electrospinning. The electrospun PAN nanofibers were then used as substrates for depositing the functional layer of zinc oxide (ZnO) on the PAN nanofiber surfaces by sol-gel technique. The effects of coating, pre-oxidation and carbonization on the surface morphology and structures of the nanofibers were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Scanning electron microscopy (SEM), respectively. The results of SEM showed a significant increase of the size of ZnO nanograins on the surface of nanofibers after the treatments of coating, pre-oxidation and carbonization. The observations by SEM also revealed that ZnO nanoclusters were firmly and clearly distributed on the surface of the carbon nanofibers. FTIR examination also confirmed the deposition of ZnO on the surface of carbon nanofibers. The XRD analysis indicated that the crystal structure of ZnO nanograins on the surface of carbon nanofibers.

  20. Characteristics of copper meshes coated with carbon nanotubes via electrophoretic deposition

    Science.gov (United States)

    Kim, Bu-Jong; Park, Jong-Seol; Hwang, Young-Jin; Park, Jin-Seok

    2016-09-01

    This study demonstrates the characteristics of a hybrid-type transparent electrode for touch screen panels, which was fabricated by coating carbon nanotubes (CNTs) via electrophoretic deposition (EPD) on copper (Cu)-meshes. The surface morphologies, visible-range transmittance and reflectance, and chromatic properties, such as yellowness and redness, of the fabricated CNTs-coated Cu mesh electrodes were characterized as functions of their dimensions (line-to-line spacing, line width, and electrode thickness) and compared with those of the Cu-mesh electrodes without coating of CNTs. The experimental results showed that the coating of CNTs substantially reduced the reflectance of the Cu-mesh electrodes and also improved their chromatic properties with their transmittance and sheet resistance only slightly changed, subsequently indicating that the CNTs-coated Cu-mesh electrodes possessed desirable characteristics for touch screen panels.

  1. Electromagnetic Interference Shielding Properties of Electroless Nickel-coated Carbon Fiber Paper Reinforced Epoxy Composites

    Institute of Scientific and Technical Information of China (English)

    CHEN Wei; WANG Jun; WANG Tao; WANG Junpeng; XU Renxin; YANG Xiaoli

    2014-01-01

    Carbon fibers (CFs) were coated with a nickel-phosphorus (Ni-P) film using an electroless plating process. The morphology, elemental composition and phases in the coating layer of the CFs were investigated by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD), respectively. Wet paper-making method was used to prepare nickle coated carbon fiber paper (NCFP). Vacuum assisted infusion molding process (VAIMP) was employed to manufacture the NCFP reinforced epoxy composites, and carbon fiber paper (CFP) reinforced epoxy composites were also produced as a comparison. Electromagnetic interference (EMI) shielding properties of the composites were measured in the 3.22-4.9 GHz frequency range using waveguide method. Both NCFP and CFP reinforced epoxy composites of 0.5 mm thickness exhibited high EMI shielding effectiveness (SE) at 8wt%fiber content, 35 dB and 30 dB, respectively, and reflection was the dominant shielding mechanism.

  2. Facile and efficient route to polyimide-TiO2 nanocomposite coating onto carbon fiber.

    Science.gov (United States)

    He, Shuqing; Lu, Chunxiang; Zhang, Shouchun

    2011-12-01

    Polyamic acid-TiO(2) hybrid colloid emulsion with an average particle size of 200 nm was formed by dispersing nano-TiO(2) into polyamic acid colloidal emulsion. The polyimide-TiO(2) nanocomposite was coated onto carbon fiber by electrophoretic deposition. The primary properties of polyamic acid-TiO(2) hybrid colloid emulsion and polyimide-TiO(2) nanocomposite coating onto carbon fiber were characterized using laser scattering, ZetaPlus particle sizing, transmission electron microscopy, field-emission scanning electron microscope, Fourier transforms infrared spectroscopy, and X-ray Diffraction analysis. The results indicated that the small amount of nano-TiO(2) would be effectively dispersed in polyamic acid colloidal particles. The polyimide-TiO(2) hybrid nanocomposite coating carbon fiber sheet displayed an excellent photodegradation performance of methyl orange, which could be degraded more than 70 wt % after 10 cycles.

  3. Electroless plating and magnetic properties of Co–Zn–P coating on short carbon fibres

    Indian Academy of Sciences (India)

    Xinghua Su; Chengwen Qiang

    2012-12-01

    A layer of Co–Zn–P alloys was coated on short carbon fibre (CFs) surfaces using electroless plating method. The influence of the concentration of Co2+ and Zn2+ and reaction time on the plating rate were measured by comparing the relative mass gain rate of Co–Zn–P-coated fibres with uncoated carbon fibres prepared under different conditions. The materials characterizations were analysed by field emission scanning electron microscopy, X-ray diffraction and energy dispersive spectroscope. The magnetic properties of Co–Zn–P/CFs composites prepared in different Zn2+ concentration baths were measured by the vibrating sample magnetometer. The best processing parameters of electroless plating of Co–Zn–P coating on short carbon fibres were obtained.

  4. Ordered mesoporous carbon/Nafion as a versatile and selective solid-phase microextraction coating.

    Science.gov (United States)

    Zeng, Jingbin; Zhao, Cuiying; Chen, Jingjing; Subhan, Fazle; Luo, Liwen; Yu, Jianfeng; Cui, Bingwen; Xing, Wei; Chen, Xi; Yan, Zifeng

    2014-10-24

    In this study, ordered mesoporous carbon (OMC) with large surface area (1019m(2)g(-1)), uniform mesoporous structure (pore size distribution centering at 4.2nm) and large pore volume (1.46cm(3)g(-1)) was synthesized using 2D hexagonally mesoporous silica MSU-H as the hard template and sucrose as the carbon precursor. The as-synthesized OMC was immobilized onto a stainless steel wire using Nafion as a binder to prepare an OMC/Nafion solid-phase microextraction (SPME) coating. The extraction characteristics of the OMC/Nafion coating were extensively investigated using a wide range of analytes including non-polar (light petroleum and benzene homologues) and polar compounds (amines and phenols). The OMC/Nafion coating exhibited much better extraction efficiency towards all selected analytes than that of a multi-walled carbon nanotubes/Nafion coating with similar length and thickness, which is ascribed to its high surface area, well-ordered mesoporous structure and large pore volume. When the OMC/Nafion coating was used to extract a mixture containing various kinds of analytes, it possessed excellent extraction selectivity towards aromatic non-polar compounds. In addition, the feasibility of the OMC/Nafion coating for application in electrochemically enhanced SPME was demonstrated using protonated amines as model analytes. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. Influence of N atomic percentages on cell attachment for CN$_x$ coatings

    Indian Academy of Sciences (India)

    D J Li; L F Niu

    2003-06-01

    Carbon film is an excellent candidate for use as a biocompatible coating due to its excellent properties. However, considerable attention has just been focused on the biocompatibility of diamond-like carbon (DLC) in recent years. It is difficult to find reports on the investigations of the biocompatibility of CN$_x$ so far. It is well known that CN$_x$ has similar structural characteristics as that of DLC. Its excellent mechanical and tribological properties are comparable to that of DLC. In addition, it is probable that the presence of nitrogen leads to a positive effect on biocompatibility. So, this work focusses on cell attachment of CN$_x$ coating and the relation between nitrogen atomic percentage and cell attachment. CN$_x$ coatings were prepared using magnetron sputtering under two N2 partial pressures for the evaluation of relation between nitrogen atomic percentage and cell attachment. Cell culture tests using human endothelial cells and mouse fibroblasts were performed. Both coatings resulted in no adverse effects on the cells in culture. Compared with CN$_x$ ( = 0.088), CN$_x$ ( = 0.149) film provided a better surface for normal cellular attachment, spreading and proliferation without apparent impairment of cell physiology. At the same time, the coatings exhibited excellent tribological and corrosion performance. XPS and AES analyses showed that higher nitrogen atomic percentage might lead to a positive effect on the cell attachment.

  6. DLC coatings for UHMWPE: relationship between bacterial adherence and surface properties.

    Science.gov (United States)

    Del Prado, G; Terriza, A; Ortiz-Pérez, A; Molina-Manso, D; Mahillo, I; Yubero, F; Puértolas, J A; Manrubia-Cobo, M; Gómez Barrena, E; Esteban, J

    2012-10-01

    Development of intrinsically antibacterial surfaces is of key importance in the context of prostheses used in orthopedic surgery. This work presents a thorough study of several plasma-based coatings that may be used with this functionality: diamond-like carbon (DLC), fluorine-doped DLC (F-DLC), and a high-fluorine-content-carbon-fluor polymer (CF(X)). The coatings were obtained by a radio-frequency plasma-assisted deposition on ultra high molecular weight polyethylene (UHMWPE) samples and physicochemical properties of the coated surfaces were correlated with their antibacterial performance against collection and clinical Staphylococcus aureus and Staphylococcus epidermidis strains. The fluorine content and the relative amount of C-C and C-F bonds were controlled by X-ray photoelectron spectroscopy, and hydrophobicity and surface tension by contact angle measurements. Surface roughness was studied by Atomic Force Microscopy. Additional nanoidentation studies were performed for DLC and F-DLC coatings. Unpaired t test and regression linear models evaluated the adherence of S. aureus and S. epidermidis on raw and coated UHMWPE samples. Comparing with UHMWPE, DLC/UHMWPE was the least adherent surface with independence of the bacterial species, finding significant reductions (p ≤ 0.001) for nine staphylococci strains. Bacterial adherence was also significantly reduced in F-DLC/ UHMWPE and CFx/UHMWPE for six strains.

  7. Ni-P-SiC composite coatings electroplated on carbon steel assisted by mechanical attrition

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Ni-P-SiC composite coatings were electroplated on carbon steel substrate assisted by mechanical attrition(MA).The MA action was conducted by dispersing glass balls on the cathodic surface,vibrating in the horizontal direction.The experimental results show that,under the assistant of MA action,the adhesion of Ni-P-SiC coating on the steel substrate can be improved effectively,and the Ni-P-SiC coatings exhibit a crystallized structure and Ni-P matrix can combine tightly with SiC particles,and the hardness and...

  8. Carbon nanotube-coating accelerated cell adhesion and proliferation on poly (L-lactide)

    Energy Technology Data Exchange (ETDEWEB)

    Hirata, Eri, E-mail: erieri@den.hokudai.ac.jp [Graduate School of Dental Medicine, Hokkaido University, Sapporo (Japan); Akasaka, Tsukasa [Graduate School of Dental Medicine, Hokkaido University, Sapporo (Japan); Uo, Motohiro [Graduate School of Medical and Dental Science, Tokyo Medical and Dental University, Tokyo (Japan); Takita, Hiroko; Watari, Fumio; Yokoyama, Atsuro [Graduate School of Dental Medicine, Hokkaido University, Sapporo (Japan)

    2012-12-01

    Highlights: Black-Right-Pointing-Pointer The surface of a polylactic acid (PLLA) was coated multiwalled carbon nanotubes (MWCNTs). Black-Right-Pointing-Pointer MWCNT-coated PLLA showed remarkable higher wettability than uncoated PLLA. Black-Right-Pointing-Pointer More Human osteosarcoma cell line (Saos2) adhered on the CNT-coated than those on uncoated PLLA at 2 h after seeding. Black-Right-Pointing-Pointer MWCNT-coating on PLLA improved the surface wettability and initial cell attachment at early stage. - Abstract: The surface of a polylactic acid (PLLA) was coated multiwalled carbon nanotubes (MWCNTs) in order to improve the surface properties. In addition, its surface characteristics and cell culturing properties were examined. Whole surface of PLLA was homogeneously covered by MWCNTs maintained a unique tubular structure. MWCNT-coated PLLA showed remarkable higher wettability than uncoated PLLA. Human osteosarcoma cell line (Saos2) adhered well on the CNT-coated PLLA whereas there are few cells attached on the uncoated PLLA at 2 h after seeding. The number of the cells on uncoated PLLA was still smaller than on the MWCNT-coated PLLA at 1 and 3 days. Moreover, The DNA content in the cells attached to the MWCNT-coated PLLA was significantly higher than that on the uncoated PLLA (p < 0.05) at 1 and 3 days. There was no significant difference between the scaffolds for ALP activity normalized by DNA content at both term (p > 0.1). Therefore MWCNT-coating on PLLA improved the surface wettability and initial cell attachment at early stage.

  9. Overoxidized polypyrrole-coated carbon fiber microelectrodes for dopamine measurements with fast-scan cyclic voltammetry.

    Science.gov (United States)

    Pihel, K; Walker, Q D; Wightman, R M

    1996-07-01

    Thin films of overoxidized polypyrrole have been electro-chemically coated onto carbon fiber microelectrodes and used for dopamine measurements with background-substracted, fast-scan cyclic voltammetry at a scan rate of 300 V/s. The films were stable on the electrode surface only when the electrodes were scanned to high potentials (1400 mV vs SSCE) in pH 7.4 aqueous buffer. Dopamine sensitivity and ascorbate and dihydroxyphenylacetic acid (DOPAC) rejection at the overoxidized polypyrrole-coated electrode were compared to those at carbon fiber electrodes coated with Nafion, a perfluorinated ion-exchange material. At 300 V/s, the overoxidized polypyrrole-coated electrode was almost 3 times more sensitive to dopamine than an uncoated disk electrode. Furthermore, the films were as effective as Nafion in the attenuation of the response to ascorbate and DOPAC, common interferences of dopamine in vivo. Overoxidized polypyrrole-coated electrodes maintained a stable response to dopamine for several hours when implanted in the rat brain. The electrochemical deposition procedure was effective at both elliptical and cylindrical electrodes. This is in contrast to the dip-coating procedures employed with Nafion films that lead to nonuniform coatings at cylindrical electrodes.

  10. Characterization and nanomechanical properties of novel dental implant coatings containing copper decorated-carbon nanotubes.

    Science.gov (United States)

    Sasani, N; Vahdati Khaki, J; Mojtaba Zebarjad, S

    2014-09-01

    Fluorapatite-titania coated Ti-based implants are promising for using in dental surgery for restoring teeth. One of the challenges in implantology is to achieve a bioactive coating with appropriate mechanical properties. In this research, simple sol-gel method was developed for synthesis of fluorapatite-titania-carbon nanotube decorated with antibacterial agent. Triethyl phosphate [PO4(C2H5)3], calcium nitrate [Ca(NO3)2] and ammonium fluoride (NH4F) were used as precursors under an ethanol-water based solution for fluorapatite (FA) production. Titanium isopropoxide and isopropanol were used as starting materials for making TiO2 sol-gels. Also, Copper acetate [Cu(C2H3O2)2·H2O] was used as precursor for decoration of multi walled carbon nanotubes (MWCNTs) with wet chemical method. The decorated MWCNTs (CNT(Cu)) were evaluated by transmission electron microscopy (TEM). The phase identification of the FA-TiO2-CNT(Cu) coating was carried out by XRD analysis. Morphology of coated samples was investigated by SEM observations. The surface elastic modulus and hardness of coatings were studied using nanoindentation technique. The results indicate that novel dental implant coating containing FA, TiO2 and copper decorated MWCNTs have proper morphological features. The results of nanoindentation test show that incorporation of CNT(Cu) in FA-TiO2 matrix can improve the nanomechanical properties of composite coating.

  11. HYDROTHERMALLY SELF-ADVANCING HYBRID COATINGS FOR MITIGATING CORROSION OF CARBON STEEL.

    Energy Technology Data Exchange (ETDEWEB)

    SUGAMA, T.

    2006-11-22

    Hydrothermally self-advancing hybrid coatings were prepared by blending two starting materials, water-borne styrene acrylic latex (SAL) as the matrix and calcium aluminate cement (CAC) as the hydraulic filler, and then their usefulness was evaluated as the room temperature curable anti-corrosion coatings for carbon steel in CO{sub 2}-laden geothermal environments at 250 C. The following two major factors supported the self-improving mechanisms of the coating during its exposure in an autoclave: First was the formation of a high temperature stable polymer structure of Ca-complexed carboxylate groups containing SAL (Ca-CCG-SAL) due to hydrothermal reactions between SAL and CAC; second was the growth with continuing exposure time of crystalline calcite and boehmite phases coexisting with Ca-CCG-SAL. These two factors promoted the conversion of the porous microstructure in the non-autoclaved coating into a densified one after 7 days exposure. The densified microstructure not only considerably reduced the conductivity of corrosive ionic electrolytes through the coatings' layers, but also contributed to the excellent adherence of the coating to underlying steel' s surface that, in turn, retarded the cathodic oxygen reduction reaction at the corrosion site of steel. Such characteristics including the minimum uptake of corrosive electrolytes by the coating and the retardation of the cathodic corrosion reaction played an important role in inhibiting the corrosion of carbon steel in geothermal environments.

  12. Protection of carbon steel against hot corrosion using thermal spray Si- and Cr-base coatings

    Science.gov (United States)

    Porcayo-Calderon, J.; Gonzalez-Rodriguez, J. G.; Martinez, L.

    1998-02-01

    A Fe75Si thermal spray coating was applied on the surface of a plain carbon steel baffle plate. Beneath this coating, a Ni20Cr coating was applied to give better adherence to the silicon coating. The baffle was installed in the high-temperature, fireside, corrosion zone of a steam generator. At the same time, an uncoated 304 stainless steel baffle was installed nearby for comparison. For 13 months the boiler burned heavy fuel oil with high contents of vanadium. The samples were studied employing scanning electron microscopy, x-ray microanalysis, and x-ray diffraction techniques. After that, it was possible to inspect the structural state of the components, and it was found that the stainless steel baffle plates were destroyed almost completely by corrosion, whereas the carbon steel coated baffle plate did not suffer a significant attack, showing that the performance of the thermal spray coating was outstanding and that the coating was not attacked by vanadium salts of the molten slag.

  13. Development of a 3D collagen scaffold coated with multiwalled carbon nanotubes.

    Science.gov (United States)

    Hirata, Eri; Uo, Motohiro; Takita, Hiroko; Akasaka, Tsukasa; Watari, Fumio; Yokoyama, Atsuro

    2009-08-01

    Carbon nanotubes (CNTs) have attractive biochemical properties such as strong cell adhesion and protein absorption, which are very useful for a cell cultivation scaffold. In this study, we prepared a multiwalled carbon nanotube-coated collagen sponge (MWCNT-coated sponge) to improve the surface properties of the collagen sponge, and its cell culturing properties were examined. The suface of the collagen sponge was homogeneously coated with MWCNTs by dispersion. MC3T3-E1 cells were cultured on and inside the MWCNT-coated sponge. The DNA content on the MWCNT-coated sponge after 1 week of culture was significantly higher than on an uncoated collagen sponge (p collagen sponge which is well known as one of the best scaffolds for cell cultivation. In addition, the MWCNT-coated surface shows strong cell adhesion. Therefore, the MWCNT-coated collagen sponge is expected to be a useful 3D scaffold for cell cultivation. (c) 2009 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 2009.

  14. Surface modification of polyester fabric with plasma pretreatment and carbon nanotube coating for antistatic property improvement

    Energy Technology Data Exchange (ETDEWEB)

    Wang, C.X., E-mail: cxwang@mail.dhu.edu.cn [College of Textiles and Clothing, Yancheng Institute of Technology, Jiangsu 224051 (China); Collaborative Innovation Center for Ecological Building Materials and Environmental Protection Equipments, Jiangsu 224051 (China); Key Laboratory for Advanced Technology in Environmental Protection, Jiangsu 224051 (China); Lv, J.C. [College of Textiles and Clothing, Yancheng Institute of Technology, Jiangsu 224051 (China); Ren, Y. [School of Textile and Clothing, Nantong University, Jiangsu 226019 (China); Zhi, T.; Chen, J.Y.; Zhou, Q.Q. [College of Textiles and Clothing, Yancheng Institute of Technology, Jiangsu 224051 (China); Lu, Z.Q.; Gao, D.W. [College of Textiles and Clothing, Yancheng Institute of Technology, Jiangsu 224051 (China); Collaborative Innovation Center for Ecological Building Materials and Environmental Protection Equipments, Jiangsu 224051 (China); Key Laboratory for Advanced Technology in Environmental Protection, Jiangsu 224051 (China); Jin, L.M. [Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201204 (China)

    2015-12-30

    Graphical abstract: - Highlights: • PET was finished by plasma treatment and SWCNT coating to improve antistatic property. • Plasma modification had a positive effect on SWCNT coating on PET fiber surface. • O{sub 2} plasma was more effective in SWCNT coating than Ar plasma in the shorter time. • Antistatic enhanced and then declined with enhancing treatment time and output power. • Antistatic increased with increasing concentration, curing time, curing temperature. - Abstract: This study introduced a green method to prepare antistatic polyester (PET) fabrics by plasma pretreatment and single-walled carbon nanotube (SWCNT) coating. The influences of plasma conditions and SWCNT coating parameters on antistatic property of PET fabrics were investigated. PET fabrics were pretreated under various plasma conditions such as different treatment times, output powers and working gases, and then SWCNT coating on the plasma treated PET fabrics was carried out by coating-dry-cure using various coating parameters including different SWCNT concentrations, curing times and curing temperatures. PET fabrics were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and volume resistivity. SEM and XPS analysis of the plasma treated PET fabrics revealed the increase in surface roughness and oxygen/nitrogen containing groups on the PET fiber surface. SEM and XPS analysis of the plasma treated and SWCNT coated PET fabrics indicated the SWCNT coating on PET fiber surface. The plasma treated and SWCNT coated PET fabrics exhibited a good antistatic property, which increased and then decreased with the increasing plasma treatment time and output power. The antistatic property of the O{sub 2} plasma treated and SWCNT coated PET fabric was better and worse than that of N{sub 2} or Ar plasma treated and SWCNT coated PET fabric in the shorter treatment time and the longer treatment time, respectively. In addition, the antistatic property of the

  15. Preparation and characterization of aligned carbon nanotubes coated with titania nanoparticles

    Institute of Scientific and Technical Information of China (English)

    YU Hongtao; ZHAO Huimin; QUAN Xie; CHEN Shuo

    2006-01-01

    Well-aligned carbon nanotubes coated with titania (TiO2) were prepared by atmospheric pressure chemical vapor deposition (APCVD), and the sequential experiments including carbon nanotubes preparation, air-oxidation purification and titania nanoparticles coating were performed at different temperatures in the same reactor. Scanning electron microscopy (SEM), transmission electron microscope (TEM), X-ray diffraction patterns (XRD), and energy- dispersive X-ray spectra (EDX) demonstrated the well-aligned nanotubes and TiO2 nanoparticles in close proximity and the average diameter of TiO2 nanoparticles was 11.5 nm.

  16. ELASTO-PLASTIC DEFORMATION OF COMPOSITE POWDERS WITH LAYERED CARBON AND CARBIDE-FORMING ELEMENT COATING

    Directory of Open Access Journals (Sweden)

    V. Kovalevsky

    2012-01-01

    Full Text Available Coating structure formation under magnetron spraying of titanium and carbon cathodes and combined cathodes, namely cobalt (EP 131 – nickel, tungsten – carbon have been investigated under conditions of carbide separate synthesis within the temperature range of 650–1200 °C. Usage of cobalt and nickel particles as matrix material leads to their rapid thermal expansion under heating during sintering process in the dilatometer. Subsequent plastic deformation of sintered samples provides obtaining a composite powder material that is a composite with framing structure of cobalt, titanium and tungsten carbides in the coatings.

  17. Physicochemical and Biological Investigation of Different Structures of Carbon Coatings Deposited onto Polyurethane

    Directory of Open Access Journals (Sweden)

    Witold Kaczorowski

    2016-01-01

    Full Text Available The aim of this study was to examine the thrombogenic properties of polyurethane that was surface modified with carbon coatings. Physicochemical properties of manufactured coatings were investigated using transmission electron microscopy (TEM, atomic force microscopy (AFM, X-ray Photoelectron Spectroscopy (XPS, Raman spectroscopy and contact angle measurement methods. Samples were examined by the Impact-R method evaluating the level of platelets activation and adhesion of particular blood cell elements. The analysis of antimicrobial resistance against E. coli colonization and viability of endothelial cells showed that polyurethane modified with use of carbon layers constituted an interesting solution for biomedical application.

  18. Carbon-Coated SnO2 Nanorod Array for Lithium-Ion Battery Anode Material

    Directory of Open Access Journals (Sweden)

    Ji Xiaoxu

    2010-01-01

    Full Text Available Abstract Carbon-coated SnO2 nanorod array directly grown on the substrate has been prepared by a two-step hydrothermal method for anode material of lithium-ion batteries (LIBs. The structural, morphological and electrochemical properties were investigated by means of X-ray diffraction (XRD, scanning electron microscopy (SEM, transmission electron microscopy (TEM and electrochemical measurement. When used as anodes for LIBs with high current density, as-obtained array reveals excellent cycling stability and rate capability. This straightforward approach can be extended to the synthesis of other carbon-coated metal oxides for application of LIBs.

  19. Study on the oriented recrystallization of carbon-coated polyethylene oriented ultrathin films.