Donor Umbilical Cord Blood Transplant in Treating Patients With Hematologic Cancer

Science.gov (United States)

2017-11-27

Chronic Myeloproliferative Disorders; Diamond-blackfan Anemia; Fanconi Anemia; Graft Versus Host Disease; Leukemia; Lymphoma; Multiple Myeloma and Plasma Cell Neoplasm; Myelodysplastic Syndromes; Myelodysplastic/Myeloproliferative Diseases

Hematopoietic Stem Cell Transplant for High Risk Hemoglobinopathies

Science.gov (United States)

2017-12-03

Sickle Cell Disease; Transfusion Dependent Alpha- or Beta- Thalassemia; Diamond Blackfan Anemia; Paroxysmal Nocturnal Hemoglobinuria; Glanzmann Thrombasthenia; Severe Congenital Neutropenia; Shwachman-Diamond Syndrome; Non-Malignant Hematologic Disorders

Investigation of the Genetics of Hematologic Diseases

Science.gov (United States)

2017-10-17

Bone Marrow Failure Syndromes; Erythrocyte Disorder; Leukocyte Disorder; Hemostasis; Blood Coagulation Disorder; Sickle Cell Disease; Dyskeratosis Congenita; Diamond-Blackfan Anemia; Congenital Thrombocytopenia; Severe Congenital Neutropenia; Fanconi Anemia

CD34+ (Non-Malignant) Stem Cell Selection for Patients Receiving Allogeneic Stem Cell Transplantation

Science.gov (United States)

2017-07-13

Bone Marrow Failure Syndrome; Severe Aplastic Anemia; Severe Congenital Neutropenia; Amegakaryocytic Thrombocytopenia; Diamond-Blackfan Anemia; Schwachman Diamond Syndrome; Primary Immunodeficiency Syndromes; Acquired Immunodeficiency Syndromes; Histiocytic Syndrome; Familial Hemophagocytic Lymphocytosis; Lymphohistiocytosis; Macrophage Activation Syndrome; Langerhans Cell Histiocytosis (LCH); Hemoglobinopathies; Sickle Cell Disease; Sickle Cell-beta-thalassemia

Bone Marrow and Kidney Transplant for Patients With Chronic Kidney Disease and Blood Disorders

Science.gov (United States)

2017-03-21

Chronic Kidney Disease; Acute Myeloid Leukemia (AML); Acute Lymphoblastic Leukemia (ALL); Chronic Myelogenous Leukemia (CML); Chronic Lymphocytic Leukemia (CLL); Non-Hodgkin's Lymphoma (NHL); Hodgkin Disease; Multiple Myeloma; Myelodysplastic Syndrome (MDS); Aplastic Anemia; AL Amyloidosis; Diamond Blackfan Anemia; Myelofibrosis; Myeloproliferative Disease; Sickle Cell Anemia; Autoimmune Diseases; Thalassemia

76 FR 3909 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Family...

Science.gov (United States)

2011-01-21

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Family History and Diamond..., discussion, and evaluation of ``Family History and Diamond Blackfan Anemia, DD11-010, initial review...

Corpus callosum defect with dilated lateral ventricles and an ...

African Journals Online (AJOL)

Diamond-Blackfan anemia (DBA), an inherited bone marrow failure syndrome characterized by anemia that usually presents before the first birthday or in early childhood, is associated with birth defects and an increased risk of cancer. Although anemia is the most prominent feature of DBA, the disease is also characterized ...

Busulfan, Fludarabine, and Thiotepa Conditioning Regimen for Non Malignant Disease

Science.gov (United States)

2018-04-19

Bone Marrow Failure Syndrome; Thalassemia; Sickle Cell Disease; Diamond Blackfan Anemia; Acquired Neutropenia in Newborn; Acquired Anemia Hemolytic; Acquired Thrombocytopenia; Hemophagocytic Lymphohistiocytoses; Wiskott-Aldrich Syndrome; Chronic Granulomatous Disease; Common Variable Immunodeficiency; X-linked Lymphoproliferative Disease; Severe Combined Immunodeficiency; Hurler Syndrome; Mannosidosis; Adrenoleukodystrophy

76 FR 13621 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Family...

Science.gov (United States)

2011-03-14

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Family History and Diamond Blackfan Anemia, DD11- 010, Initial Review Correction: This notice was published in the Federal Register on...

Tyrosine 87 is vital for the activity of human protein arginine methyltransferase 3 (PRMT3)

Czech Academy of Sciences Publication Activity Database

Handrková, H.; Petrák, J.; Halada, Petr; Pospíšilová, D.; Čmejla, R.

2011-01-01

Roč. 1814, č. 2 (2011), s. 277-282 ISSN 1570-9639 R&D Projects: GA MŠk LC07017 Institutional research plan: CEZ:AV0Z50200510 Keywords : DIAMOND-BLACKFAN ANEMIA * SUBSTRATE -SPECIFICITY * N-METHYLTRANSFERASE Subject RIV: CE - Biochemistry Impact factor: 3.635, year: 2011

Development of Soft Tissue Sarcomas in Ribosomal Proteins L5 and S24 Heterozygous Mice

Czech Academy of Sciences Publication Activity Database

Kazerounian, S.; Ciarlini, P.D.S.C.; Yuan, D.; Ghazvinian, R.; Alberich-Jorda, Meritxell; Joshi, M.; Zhang, H.; Beggs, A.H.; Gazda, H.T.

2016-01-01

Roč. 7, č. 1 (2016), s. 32-36 ISSN 1837-9664 R&D Projects: GA MŠk LK21307 Institutional support: RVO:68378050 Keywords : Ribosomal proteins RPL5 and RPS24 * Diamond-Blackfan anemia * Soft tissue sarcoma Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 2.916, year: 2016

Haematopoietic stem cell transplantation for Diamond Blackfan anaemia: a report from the Italian Association of Paediatric Haematology and Oncology Registry.

Science.gov (United States)

Fagioli, Franca; Quarello, Paola; Zecca, Marco; Lanino, Edoardo; Corti, Paola; Favre, Claudio; Ripaldi, Mimmo; Ramenghi, Ugo; Locatelli, Franco; Prete, Arcangelo

2014-06-01

Allogeneic haematopoietic stem cell transplantation (HSCT) is the only curative option for patients with Diamond Blackfan anaemia (DBA). We report the transplantation outcome of 30 Italian DBA patients referred to the Italian Association of Paediatric Haematology and Oncology Registry between 1990 and 2012. This is one of the largest national registry cohorts of transplanted DBA patients. Most patients (83%) were allografted after 2000. A matched sibling donor was employed in 16 patients (53%), the remaining 14 patients (47%) were transplanted from matched unrelated donors. Twenty-eight of the 30 patients engrafted. One patient died at day +6 due to veno-occlusive disease without achieving neutrophil recovery and another patient remained transfusion-dependent despite the presence of a full donor chimerism. The 5-year overall survival and transplant-related mortality was 74·4% and 25·6%, respectively. Patients younger than 10 years as well as those transplanted after 2000 showed a significantly higher overall survival and a significantly lower risk of transplant-related mortality. No difference between donor type was observed. Our data suggest that allogeneic HSCT from a related or unrelated donor was a reasonable alternative to transfusion therapy in young and well chelated DBA patients. © 2014 John Wiley & Sons Ltd.

New Drugs for Anemia Treatment Based on a New Understanding of the Mechanisms of Stress Erythropoiesis

Science.gov (United States)

2013-09-01

antagonist that inhibits stomach acid production. It is commonly used in the treatment of peptic ulcer disease (PUD) and gastroesophageal reflux disease ...situations where the maximal Epo-dependent output is not sufficient (hemolysis, sepsis, genetic bone marrow failure diseases such as Diamond Blackfan...2 These studies led us to generate two hypotheses that underlie the research supported by this grant. First, we proposed that combinations of

Preimplantation genetic diagnosis (PGD) for HLA typing: bases for setting up an open international collaboration when PGD is not available.

Science.gov (United States)

Bellavia, Marina; Von Der Weid, Nicolas; Peddes, Christina; Jacquemont, Sebastien; Liebaers, Inge; Hohlfeld, Patrick; Wunder-Galié, Dorothea; de Ziegler, Dominique

2010-08-01

In severe forms of Diamond-Blackfan anemia, preimplantation genetic diagnosis (PGD) of histocompatibility leukocyte antigen-compatible embryos for enabling the next sibling in the family to be a stem-cell transplantation donor constitutes the sole lasting cure capable of terminating the enduring need for iterative transfusions. We report here an open collaboration between two renowned institutions to provide a family desiring this treatment even though they resided where the preimplantation genetic diagnosis procedure is banned. Copyright (c) 2010 American Society for Reproductive Medicine. All rights reserved.

Familial Investigations of Childhood Cancer Predisposition

Science.gov (United States)

2018-01-03

Acute Leukemia; Adenomatous Polyposis; Adrenocortical Carcinoma; AML; BAP1 Tumor Predisposition Syndrome; Carney Complex; Choroid Plexus Carcinoma; Constitutional Mismatch Repair Deficiency Syndrome; Diamond-Blackfan Anemia; DICER1 Syndrome; Dyskeratosis Congenita; Emberger Syndrome; Familial Acute Myeloid Leukemia; Familial Adenomatous Polyposis; Fanconi Anemia; Familial Cancer; Familial Wilms Tumor; Familial Neuroblastoma; GIST; Hereditary Breast and Ovarian Cancer; Hereditary Paraganglioma-Pheochromocytoma Syndrome; Hodgkin Lymphoma; Juvenile Polyposis; Li-Fraumeni Syndrome; Lynch Syndrome; MDS; Melanoma Syndrome; Multiple Endocrine Neoplasia Type 1; Multiple Endocrine Neoplasia Type 2; Neuroblastoma; Neurofibromatosis Type 1; Neurofibromatosis Type II; Nevoid Basal Cell Carcinoma Syndrome; Non Hodgkin Lymphoma; Noonan Syndrome and Other Rasopathy; Overgrowth Syndromes; Pancreatic Cancer; Peutz-Jeghers Syndrome; Pheochromocytoma/Paraganglioma; PTEN Hamartoma Tumor Syndrome; Retinoblastoma; Rhabdoid Tumor Predisposition Syndrome; Rhabdomyosarcoma; Rothmund-Thomson Syndrome; Tuberous Sclerosis; Von Hippel-Lindau Disease

J-GLOBAL MeSH Dictionary: Diamond‐Blackfan貧血 [MeCab user dictionary for science technology term[Archive

Lifescience Database Archive (English)

Full Text Available MeCab user dictionary for science technology term Diamond‐Blackfan貧血 名詞 サ変接続 * * * * Diamond‐Blackfan貧血... ... MeSH D029503 200906094799646316 C LS51 UNKNOWN_2 Diamond ‐ Blackfan 貧血

Ribonuclease inhibitor 1 regulates erythropoiesis by controlling GATA1 translation.

Science.gov (United States)

Chennupati, Vijaykumar; Veiga, Diogo Ft; Maslowski, Kendle M; Andina, Nicola; Tardivel, Aubry; Yu, Eric Chi-Wang; Stilinovic, Martina; Simillion, Cedric; Duchosal, Michel A; Quadroni, Manfredo; Roberts, Irene; Sankaran, Vijay G; MacDonald, H Robson; Fasel, Nicolas; Angelillo-Scherrer, Anne; Schneider, Pascal; Hoang, Trang; Allam, Ramanjaneyulu

2018-04-02

Ribosomal proteins (RP) regulate specific gene expression by selectively translating subsets of mRNAs. Indeed, in Diamond-Blackfan anemia and 5q- syndrome, mutations in RP genes lead to a specific defect in erythroid gene translation and cause anemia. Little is known about the molecular mechanisms of selective mRNA translation and involvement of ribosomal-associated factors in this process. Ribonuclease inhibitor 1 (RNH1) is a ubiquitously expressed protein that binds to and inhibits pancreatic-type ribonucleases. Here, we report that RNH1 binds to ribosomes and regulates erythropoiesis by controlling translation of the erythroid transcription factor GATA1. Rnh1-deficient mice die between embryonic days E8.5 and E10 due to impaired production of mature erythroid cells from progenitor cells. In Rnh1-deficient embryos, mRNA levels of Gata1 are normal, but GATA1 protein levels are decreased. At the molecular level, we found that RNH1 binds to the 40S subunit of ribosomes and facilitates polysome formation on Gata1 mRNA to confer transcript-specific translation. Further, RNH1 knockdown in human CD34+ progenitor cells decreased erythroid differentiation without affecting myelopoiesis. Our results reveal an unsuspected role for RNH1 in the control of GATA1 mRNA translation and erythropoiesis.

[A boy with cyclic vomiting and an alleged furosemide allergy on the basis of a subpelvic stenosis

NARCIS (Netherlands)

Schreuder, M.F.; Wijk, J.A. van; Horst, H.J. van der; Bokenkamp, A.

2008-01-01

An 8-year-old boy, known with a Diamond-Blackfan anaemia, was admitted to the hospital because of frequent vomiting since 3 days and loin pain. In previous years, he had been admitted several times for the same complaints but no cause had been identified. Ultrasound examination of the abdomen

Pernicious anemia

Science.gov (United States)

... malabsorption); Anemia - intrinsic factor; Anemia - IF; Anemia - atrophic gastritis ... of pernicious anemia include: Weakened stomach lining (atrophic gastritis) An autoimmune condition in which the body's immune ...

Diamond anvil cells using boron-doped diamond electrodes covered with undoped diamond insulating layer

Science.gov (United States)

Matsumoto, Ryo; Yamashita, Aichi; Hara, Hiroshi; Irifune, Tetsuo; Adachi, Shintaro; Takeya, Hiroyuki; Takano, Yoshihiko

2018-05-01

Diamond anvil cells using boron-doped metallic diamond electrodes covered with undoped diamond insulating layers have been developed for electrical transport measurements under high pressure. These designed diamonds were grown on a bottom diamond anvil via a nanofabrication process combining microwave plasma-assisted chemical vapor deposition and electron beam lithography. The resistance measurements of a high-quality FeSe superconducting single crystal under high pressure were successfully demonstrated by just putting the sample and gasket on the bottom diamond anvil directly. The superconducting transition temperature of the FeSe single crystal was increased to up to 43 K by applying uniaxial-like pressure.

Friction and wear properties of diamonds and diamond coatings

International Nuclear Information System (INIS)

Hayward, I.P.

1991-01-01

The recent development of chemical vapor deposition techniques for diamond growth enables bearings to be designed which exploit diamond's low friction and extreme resistance to wear. However, currently produced diamond coatings differ from natural diamond surfaces in that they are polycrystalline and faceted, and often contain appreciable amounts of non-diamond material (i.e. graphitic or amorphous carbon). Roughness, in particular, influences the friction and wear properties; rough coatings severely abrade softer materials, and can even wear natural diamond sliders. Nevertheless, the best available coatings exhibit friction coefficients as low as those of natural diamond and are highly resistant to wear. This paper reviews the tribological properties of natural diamond, and compares them with those of chemical vapor deposited diamond coatings. Emphasis is placed on the roles played by roughness and material transfer in controlling frictional behavior. (orig.)

Pregnancy Complications: Anemia

Science.gov (United States)

... online community Home > Complications & Loss > Pregnancy complications > Anemia Anemia E-mail to a friend Please fill in ... anemia at a prenatal care visit . What causes anemia? Usually, a woman becomes anemic (has anemia) because ...

Iron-Deficiency Anemia

Science.gov (United States)

... To Health Topics / Iron-Deficiency Anemia Iron-Deficiency Anemia Also known as Leer en español Iron-deficiency ... anemia. Blood tests to screen for iron-deficiency anemia To screen for iron-deficiency anemia, your doctor ...

Ribosomal protein mutations induce autophagy through S6 kinase inhibition of the insulin pathway.

Directory of Open Access Journals (Sweden)

Harry F Heijnen

Full Text Available Mutations affecting the ribosome lead to several diseases known as ribosomopathies, with phenotypes that include growth defects, cytopenia, and bone marrow failure. Diamond-Blackfan anemia (DBA, for example, is a pure red cell aplasia linked to the mutation of ribosomal protein (RP genes. Here we show the knock-down of the DBA-linked RPS19 gene induces the cellular self-digestion process of autophagy, a pathway critical for proper hematopoiesis. We also observe an increase of autophagy in cells derived from DBA patients, in CD34+ erythrocyte progenitor cells with RPS19 knock down, in the red blood cells of zebrafish embryos with RP-deficiency, and in cells from patients with Shwachman-Diamond syndrome (SDS. The loss of RPs in all these models results in a marked increase in S6 kinase phosphorylation that we find is triggered by an increase in reactive oxygen species (ROS. We show that this increase in S6 kinase phosphorylation inhibits the insulin pathway and AKT phosphorylation activity through a mechanism reminiscent of insulin resistance. While stimulating RP-deficient cells with insulin reduces autophagy, antioxidant treatment reduces S6 kinase phosphorylation, autophagy, and stabilization of the p53 tumor suppressor. Our data suggest that RP loss promotes the aberrant activation of both S6 kinase and p53 by increasing intracellular ROS levels. The deregulation of these signaling pathways is likely playing a major role in the pathophysiology of ribosomopathies.

Disease-specific hematopoietic stem cell transplantation in children with inherited bone marrow failure syndromes.

Science.gov (United States)

Li, Qian; Luo, Changying; Luo, Chengjuan; Wang, Jianmin; Li, Benshang; Ding, Lixia; Chen, Jing

2017-08-01

Hematopoietic stem cell transplantation (HSCT) using an optimized conditioning regimen is essential for the long-term survival of patients with inherited bone marrow failure syndromes (IBMFS). We report HSCT in 24 children with Fanconi anemia (FA, n = 12), Diamond-Blackfan anemia (DBA, n = 7), and dyskeratosis congenita (DC, n = 5) from a single HSCT center. The graft source was peripheral blood stem cells (n = 19) or cord blood stem cells (n = 5). FA and DC patients received reduced-intensity conditioning, while DBA patients had myeloablative conditioning. The median numbers of infused mononuclear cells and CD34+ cells were 14.20 × 10 8 /kg and 4.3 × 10 6 /kg, respectively. The median time for neutrophil and platelet recovery was 12 and 18 days, respectively. Complete donor engraftment was achieved in 23 of 24 patients. There was one primary graft failure. During a median follow-up of 27.5 months (range, 2-130 months), the overall survival in all patients was 95.8%. The incidence of grade II-III acute graft versus host disease (GvHD) and chronic GvHD was 29.2% and 16.7%, respectively. We conclude that HSCT can be a curative option for patients with IBMFS. Modification of the conditioning regimen based on the type of disease may lead to encouraging long-term outcomes.

Anemia (For Parents)

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Anemia KidsHealth / For Parents / Anemia What's in this article? ... Deficiency Anemia in My Kids? Print What Is Anemia? Anemia is when the level of healthy red ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... To Health Topics / Iron-Deficiency Anemia Iron-Deficiency Anemia Also known as Leer en español Iron-deficiency ... anemia. Blood tests to screen for iron-deficiency anemia To screen for iron-deficiency anemia, your doctor ...

Diamond Fuzzy Number

Directory of Open Access Journals (Sweden)

T. Pathinathan

2015-01-01

Full Text Available In this paper we define diamond fuzzy number with the help of triangular fuzzy number. We include basic arithmetic operations like addition, subtraction of diamond fuzzy numbers with examples. We define diamond fuzzy matrix with some matrix properties. We have defined Nested diamond fuzzy number and Linked diamond fuzzy number. We have further classified Right Linked Diamond Fuzzy number and Left Linked Diamond Fuzzy number. Finally we have verified the arithmetic operations for the above mentioned types of Diamond Fuzzy Numbers.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... Research Home / < Back To Health Topics / Iron-Deficiency Anemia Iron-Deficiency Anemia Also known as Leer en español Iron-deficiency ... iron-deficiency anemia. Blood tests to screen for iron-deficiency anemia To screen for iron-deficiency anemia, your doctor ...

Diamond Pixel Detectors and 3D Diamond Devices

International Nuclear Information System (INIS)

Venturi, N.

2016-01-01

Results from detectors of poly-crystalline chemical vapour deposited (pCVD) diamond are presented. These include the first analysis of data of the ATLAS Diamond Beam Monitor (DBM). The DBM module consists of pCVD diamond sensors instrumented with pixellated FE-I4 front-end electronics. Six diamond telescopes, each with three modules, are placed symmetrically around the ATLAS interaction point. The DBM tracking capabilities allow it to discriminate between particles coming from the interaction point and background particles passing through the ATLAS detector. Also, analysis of test beam data of pCVD DBM modules are presented. A new low threshold tuning algorithm based on noise occupancy was developed which increases the DBM module signal to noise ratio significantly. Finally first results from prototypes of a novel detector using pCVD diamond and resistive electrodes in the bulk, forming a 3D diamond device, are discussed. 3D devices based on pCVD diamond were successfully tested with test beams at CERN. The measured charge is compared to that of a strip detector mounted on the same pCVD diamond showing that the 3D device collects significantly more charge than the planar device.

Hemolytic anemia

Science.gov (United States)

Anemia - hemolytic ... bones that helps form all blood cells. Hemolytic anemia occurs when the bone marrow isn't making ... destroyed. There are several possible causes of hemolytic anemia. Red blood cells may be destroyed due to: ...

Diamond bio electronics.

Science.gov (United States)

Linares, Robert; Doering, Patrick; Linares, Bryant

2009-01-01

The use of diamond for advanced applications has been the dream of mankind for centuries. Until recently this dream has been realized only in the use of diamond for gemstones and abrasive applications where tons of diamonds are used on an annual basis. Diamond is the material system of choice for many applications, but its use has historically been limited due to the small size, high cost, and inconsistent (and typically poor) quality of available diamond materials until recently. The recent development of high quality, single crystal diamond crystal growth via the Chemical Vapor Deposition (CVD) process has allowed physcists and increasingly scientists in the life science area to think beyond these limitations and envision how diamond may be used in advanced applications ranging from quantum computing, to power generation and molecular imaging, and eventually even diamond nano-bots. Because of diamond's unique properties as a bio-compatible material, better understanding of diamond's quantum effects and a convergence of mass production, semiconductor-like fabrication process, diamond now promises a unique and powerful key to the realization of the bio-electronic devices being envisioned for the new era of medical science. The combination of robust in-the-body diamond based sensors, coupled with smart bio-functionalized diamond devices may lead to diamond being the platform of choice for bio-electronics. This generation of diamond based bio-electronic devices would contribute substantially to ushering in a paradigm shift for medical science, leading to vastly improved patient diagnosis, decrease of drug development costs and risks, and improved effectiveness of drug delivery and gene therapy programs through better timed and more customized solutions.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... en español Iron-deficiency anemia is a common type of anemia that occurs if you do not ... iron-deficiency anemia and help rule out other types of anemia. Treatment will explain treatment-related complications ...

Anemia (For Teens)

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Anemia KidsHealth / For Teens / Anemia What's in this article? ... Enough Iron Print en español Anemia What Is Anemia? Lots of teens are tired. With all the ...

Fanconi anemia

Science.gov (United States)

... possibly given through a vein) to treat infections Blood transfusions to treat symptoms due to low blood counts ... have regular check-ups to screen for cancer. Alternative Names Fanconi's anemia; Anemia - Fanconi's Images Formed elements of blood References Bagby GC. Aplastic anemia and related bone ...

Hemolytic Anemia

Science.gov (United States)

... worsen your condition or lead to complications. Hemolytic Anemia and Children Parents of children who have hemolytic anemia usually ... members, friends, and your child's classmates about hemolytic anemia. You also may want to tell your child's teachers or other caregivers about the condition. Let ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... anemia, your doctor may order the following blood tests to diagnose iron-deficiency anemia: Complete blood count (CBC) to ... than normal when viewed under a microscope. Different tests help your doctor diagnose iron-deficiency anemia. In iron-deficiency anemia, blood ...

Lateral overgrowth of diamond film on stripes patterned Ir/HPHT-diamond substrate

Science.gov (United States)

Wang, Yan-Feng; Chang, Xiaohui; Liu, Zhangcheng; Liu, Zongchen; Fu, Jiao; Zhao, Dan; Shao, Guoqing; Wang, Juan; Zhang, Shaopeng; Liang, Yan; Zhu, Tianfei; Wang, Wei; Wang, Hong-Xing

2018-05-01

Epitaxial lateral overgrowth (ELO) of diamond films on patterned Ir/(0 0 1)HPHT-diamond substrates have been carried out by microwave plasma CVD system. Ir/(0 0 1)HPHT-diamond substrates are fabricated by photolithographic and magnetron sputtering technique. The morphology of the as grown ELO diamond film is characterized by optical microscopy and scanning electronic microscopy. The quality and stress of the ELO diamond film are investigated by surface etching pit density and micro-Raman spectroscopy. Two ultraviolet photodetectors are fabricated on ELO diamond area and non-ELO diamond area prepared on same substrate, and that one on ELO diamond area indicates better photoelectric properties. All results indicate quality of ELO diamond film is improved.

What Is Aplastic Anemia?

Science.gov (United States)

... Home / Anemia Aplastic Anemia Also known as What Is Aplastic anemia (a-PLAS-tik uh-NEE-me-uh) is ... heart, heart failure , infections, and bleeding. Severe aplastic anemia can even cause death. Overview Aplastic anemia is ...

Diamond identifaction

International Nuclear Information System (INIS)

1976-01-01

X-ray topography on diamonds allows for unique identification of diamonds. The method described consists of the registration of crystal defects, inclusions etc. of a diamond, resulting in a 'finger print' of the individual jewel which can only be changed by its complete destruction

Diamond identification

International Nuclear Information System (INIS)

Lang, A.R.

1979-01-01

Methods of producing sets of records of the internal defects of diamonds as a means of identification of the gems by x-ray topography are described. To obtain the records one can either use (a) monochromatic x-radiation reflected at the Bragg angle from crystallographically equivalent planes of the diamond lattice structure, Bragg reflections from each such plane being recorded from a number of directions of view, or (b) white x-radiation incident upon the diamond in directions having a constant angular relationship to each equivalent axis of symmetry of the diamond lattice structure, Bragg reflections being recorded for each direction of the incident x-radiation. By either method an overall point-to-point three dimensional representation of the diamond is produced. (U.K.)

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... Blood Transfusion Heart-Healthy Lifestyle Changes Heart Failure Hemolytic Anemia Hemophilia Pernicious Anemia Restless Legs Syndrome Von Willebrand Disease Other Resources NHLBI resources Your Guide to Anemia [ ...

Anemia

Science.gov (United States)

... child might have anemia. They will do a physical exam and review your health history and symptoms. To diagnose anemia, your doctor ... and Wellness Staying Healthy Healthy Living Travel Occupational Health First Aid and ... Pets and Animals myhealthfinder Food and Nutrition Healthy Food ...

Diamonds on Diamond: structural studies at extreme conditions on the Diamond Light Source.

Science.gov (United States)

McMahon, M I

2015-03-06

Extreme conditions (EC) research investigates how the structures and physical and chemical properties of materials change when subjected to extremes of pressure and temperature. Pressures in excess of one million times atmospheric pressure can be achieved using a diamond anvil cell, and, in combination with high-energy, micro-focused radiation from a third-generation synchrotron such as Diamond, detailed structural information can be obtained using either powder or single-crystal diffraction techniques. Here, I summarize some of the research drivers behind international EC research, and then briefly describe the techniques by which high-quality diffraction data are obtained. I then highlight the breadth of EC research possible on Diamond by summarizing four examples from work conducted on the I15 and I19 beamlines, including a study which resulted in the first research paper from Diamond. Finally, I look to the future, and speculate as to the type of EC research might be conducted at Diamond over the next 10 years. © 2015 The Author(s) Published by the Royal Society. All rights reserved.

Toward deep blue nano hope diamonds: heavily boron-doped diamond nanoparticles.

Science.gov (United States)

Heyer, Steffen; Janssen, Wiebke; Turner, Stuart; Lu, Ying-Gang; Yeap, Weng Siang; Verbeeck, Jo; Haenen, Ken; Krueger, Anke

2014-06-24

The production of boron-doped diamond nanoparticles enables the application of this material for a broad range of fields, such as electrochemistry, thermal management, and fundamental superconductivity research. Here we present the production of highly boron-doped diamond nanoparticles using boron-doped CVD diamond films as a starting material. In a multistep milling process followed by purification and surface oxidation we obtained diamond nanoparticles of 10-60 nm with a boron content of approximately 2.3 × 10(21) cm(-3). Aberration-corrected HRTEM reveals the presence of defects within individual diamond grains, as well as a very thin nondiamond carbon layer at the particle surface. The boron K-edge electron energy-loss near-edge fine structure demonstrates that the B atoms are tetrahedrally embedded into the diamond lattice. The boron-doped diamond nanoparticles have been used to nucleate growth of a boron-doped diamond film by CVD that does not contain an insulating seeding layer.

Anemia and Pregnancy

Science.gov (United States)

... Advocacy Toolkit Home For Patients Blood Disorders Anemia Anemia and Pregnancy Your body goes through significant changes ... becoming anemic. back to top Is Pregnancy-Related Anemia Preventable? Good nutrition is the best way to ...

ANEMIA DAN ANEMIA GIZI BESI PADA KEHAMILAN: HUBUNGANNYA DENGAN ASUPAN PROTEIN DAN ZAT GIZI MIKRO

Directory of Open Access Journals (Sweden)

Nur Handayani Utami

2015-03-01

Full Text Available Anemia masih menjadi permasalahan kesehatan pada wanita hamil. Zat besi dianggap sebagai salah satu zat gizi mikro yang berperan terhadap terjadinya anemia. Kekurangan gizi besi dalam tingkat lanjut dapat menyebabkan anemia, yang disebut sebagai anemia gizi besi. Tujuan studi ini adalah untuk menganalisis perbedaan antara asupan protein dan gizi mikro serta menghitung odd ratio (OR kejadian anemia dan anemia gizi besi akibat asupan protein dan gizi mikro pada wanita hamil di lokasi studi. Analisis ini merupakan analisa dari data studi kohor Tumbuh Kembang anak pada tahun pertama, yang dilaksanakan di Kelurahan Kebon Kalapa dan Ciwaringin, Kota Bogor yang dianalisa menggunakan disainkasus kontrol. Sebanyak 47 ibu hamil menjadi sampel dalam analisa ini. Kategori untuk anemia yaitu apabila kadar hemoglobin (Hb ibu hamil ≤11 g/dL. Kekurangan gizi besi dikategorikan apabila kadar serum transferrin reseptor (sTfR diatas 4.4 mg/L. Sedangkan Anemia Gizi Besi dikategorikan apabila memiliki kadar Hb < 11 g/dL dan sTfr > 4.4 mg/L. Tes one way anova digunakan untuk menganalisa adanya perbedaan asupan energi, protein dan zat gizi mikro antara ibu hamil yang mengalami anemia, anemia gizi besi maupun yang normal. Odd ratio dianalisa dengan menggunakan uji chi square. Nilai signifikan ditentukan apabila nilai p value < 0.05 dan perhitungan OR> 1. 27.7% dari ibu hamil di lokasi studi mengalami anemia, 14.9% tergolong dalam anemia ringan, 10.6% anemia sedang dan 2.1% anemia berat. Anemia gizi besi dialami oleh 17% dari wanita hamil. Terdapat hubungan yang signifikan antara keparahan anemia dan terjadinya anemia gizi besi. Tidak ditemukan perbedaan antara asupan protein, besi, folate dan zink pada wanita yang mengalami anemia, anemia gizi besi maupun yang normal. Akan tetapi terdapat kecenderungan bahwa asupan zat besi dan seng pada ibu yang anemia dan anemia gizi besi lebih rendah daripada ibu yang normal. Anemia masih menjadi permasalahan kesehatan pada ibu

Inborn anemias in mice

International Nuclear Information System (INIS)

Bernstein, S.E.; Barker, J.E.; Russell, E.S.

1981-06-01

hereditary anemias of mice have been the chief objects of investigation. At present under study are four macrocytic anemias, five hemolytic anemias, nonhemolytic microcytic anemia, transitory siderocytic anemia, sex-linked iron-transport anemia, an α-thalassemia, and a new target-cell anemia. Each of these blood dyscrasias is caused by the action of a unique mutant gene, which determines the structure of different intracellular molecules, and thus controls a different metabolic process. Thus our wide range of different hereditary anemias has considerable potential for uncovering many different aspects of hemopoietic homeostatic mechanisms in the mouse. Each anemia is studied through: (a) characterization of peripheral blood values, (b) determinations of radiosensitivity under a variety of conditions, (c) measurements of iron metabolism and heme synthesis, (d) histological and biochemical study of blood-forming tissue, (e) functional tests of the stem cell component, (f) examination of responses to erythroid stimuli, and (g) transplantation of tissue between individuals of differently affected genotypes

Anemia Due to Excessive Bleeding

Science.gov (United States)

... Hemolytic Anemia Hemoglobin C, S-C, and E Diseases Iron Deficiency Anemia Sickle Cell Disease Thalassemias Vitamin Deficiency Anemia (See ... Hemolytic Anemia Hemoglobin C, S-C, and E Diseases Iron Deficiency Anemia Sickle Cell Disease Thalassemias Vitamin Deficiency Anemia NOTE: ...

From Bad to Worse: Anemia on Admission and Hospital-Acquired Anemia.

Science.gov (United States)

Koch, Colleen G; Li, Liang; Sun, Zhiyuan; Hixson, Eric D; Tang, Anne S; Phillips, Shannon C; Blackstone, Eugene H; Henderson, J Michael

2017-12-01

Anemia at hospitalization is often treated as an accompaniment to an underlying illness, without active investigation, despite its association with morbidity. Development of hospital-acquired anemia (HAA) has also been associated with increased risk for poor outcomes. Together, they may further heighten morbidity risk from bad to worse. The aims of this study were to (1) examine mortality, length of stay, and total charges in patients with present-on-admission (POA) anemia and (2) determine whether these are exacerbated by development of HAA. In this cohort investigation, from January 1, 2009, to August 31, 2011, a total of 44,483 patients with POA anemia were admitted to a single health system compared with a reference group of 48,640 without POA anemia or HAA. Data sources included the University HealthSystem Consortium database and electronic medical records. Risk-adjustment methods included logistic and linear regression models for mortality, length of stay, and total charges. Present-on-admission anemia was defined by administrative coding. Hospital-acquired anemia was determined by changes in hemoglobin values from the electronic medical record. Approximately one-half of the patients experienced worsening of anemia with development of HAA. Risk for death and resource use increased with increasing severity of HAA. Those who developed severe HAA had 2-fold greater odds for death; that is, mild POA anemia with development of severe HAA resulted in greater mortality (odds ratio, 2.57; 95% confidence interval, 2.08-3.18; P < 0.001), increased length of stay (2.23; 2.16-2.31; P < 0.001), and higher charges (2.09; 2.03-2.15; P < 0.001). Present-on-admission anemia is associated with increased mortality and resource use. This risk is further increased from bad to worse when patients develop HAA. Efforts to address POA anemia and HAA deserve attention.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... to moderate iron-deficiency anemia, or red blood cell transfusion for severe iron-deficiency anemia. You may ... body needs iron to make healthy red blood cells. Iron-deficiency anemia usually develops over time because ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... view the colon directly. What if my doctor thinks something else is causing my iron-deficiency anemia? ... deficiency anemia early in life affects later behavior, thinking, and mood during adolescence. Treating anemia in premature ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... you are diagnosed with iron-deficiency anemia. Risk Factors You may have an increased risk for iron- ... iron-deficiency anemia if you have certain risk factors , including pregnancy. To prevent iron-deficiency anemia, your ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... detect signs of iron-deficiency anemia and help rule out other types of anemia. Treatment will explain ... your blood. More testing may be needed to rule out other types of anemia. Tests for gastrointestinal ...

About Anemia (For Kids)

Science.gov (United States)

... Safe Videos for Educators Search English Español About Anemia KidsHealth / For Kids / About Anemia What's in this ... to every cell in your body. What Is Anemia? Anemia happens when a person doesn't have ...

Detection of diamonds

International Nuclear Information System (INIS)

Hansen, J.O.; Blondeel, E.J.G.; Taylor, G.T.

1991-01-01

Diamond particles are distinguished from non-diamond, associated particles on the basis of their higher refractive index. The particles are brought to a specific location, typically in a stream of water flowing full in a vertical duct, and a beam of collimated electromagnetic radiation is directed at them. An array of radiation detectors is provided to detect refracted and/or reflected radiation. The array is so configured that the responses of the detectors, considered collectively, will be indicative of the presence of a diamond when a diamond is in fact present. However, when a particle having a substantially lower refractive index is present, the responses of the detectors will not be so indicative. The diamond and non-diamond particles can subsequently be sorted from one another

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... for iron-deficiency anemia if you have certain risk factors , including pregnancy. To prevent iron-deficiency anemia, your doctor may recommend you eat heart-healthy foods or control other conditions that can cause iron-deficiency anemia. ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... Home / < Back To Health Topics / Iron-Deficiency Anemia Iron-Deficiency Anemia Also known as Leer en español ... bleeding Consuming less than recommended daily amounts of iron Iron-deficiency anemia can be caused by getting ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... may require intravenous (IV) iron therapy or a blood transfusion . Iron supplements Your doctor may recommend that you ... Anemia Aplastic Anemia Arrhythmia Blood Donation Blood Tests Blood Transfusion Heart-Healthy Lifestyle Changes Heart Failure Hemolytic Anemia ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... Iron-Deficiency Anemia Iron-Deficiency Anemia Also known as Leer en español Iron-deficiency anemia is a ... address the cause of your iron deficiency, such as any underlying bleeding. If undiagnosed or untreated, iron- ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... Medicine (TOPMed) Program Non-NHLBI resources Anemia (National Library of Medicine, MedlinePlus) Anemia in Chronic Kidney Disease ( ... Supplement Fact Sheet (NIH) Iron-Deficiency Anemia (National Library of Medicine, MedlinePlus) Building 31 31 Center Drive ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... anemia if you have certain risk factors , including pregnancy. To prevent iron-deficiency anemia, your doctor may recommend you eat heart-healthy foods or control other conditions that can cause iron-deficiency anemia. Blood tests to screen for ...

Synthetic diamond in electrochemistry

International Nuclear Information System (INIS)

Pleskov, Yurii V

1999-01-01

The results of studies on the electrochemistry of diamond carried out during the last decade are reviewed. Methods for the preparation, the crystalline structure and the main electrophysical properties of diamond thin films are considered. Depending on the doping conditions, the diamond behaves as a superwide-gap semiconductor or as a semimetal. It is shown that the 'metal-like' diamond is corrosion-resistant and can be used advantageously as an electrode in the electrosynthesis (in particular, for the electroreduction of compounds that are difficult to reduce) and electroanalysis. Kinetic characteristics of some redox reactions and the impedance parameters for diamond electrodes are presented. The results of comparative studies of the electrodes made of diamond single crystals, polycrystalline diamond and amorphous diamond-like carbon, which reveal the effect of the crystalline structure (e.g., the influence of intercrystallite boundaries) on the electrochemical properties of diamond, are presented. The bibliography includes 99 references.

Structure and properties of diamond and diamond-like films

Energy Technology Data Exchange (ETDEWEB)

Clausing, R.E. [Oak Ridge National Lab., TN (United States)

1993-01-01

This section is broken into four parts: (1) introduction, (2) natural IIa diamond, (3) importance of structure and composition, and (4) control of structure and properties. Conclusions of this discussion are that properties of chemical vapor deposited diamond films can compare favorably with natural diamond, that properties are anisotropic and are a strong function of structure and crystal perfection, that crystal perfection and morphology are functions of growth conditions and can be controlled, and that the manipulation of texture and thereby surface morphology and internal crystal perfection is an important step in optimizing chemically deposited diamond films for applications.

Diamond semiconducting devices

International Nuclear Information System (INIS)

Polowczyk, M.; Klugmann, E.

1999-01-01

Many efforts to apply the semiconducting diamond for construction of electronic elements: resistors, thermistors, photoresistors, piezoresistors, hallotrons, pn diodes, Schottky diodes, IMPATT diodes, npn transistor, MESFETs and MISFETs are reviewed. Considering the possibilities of acceptor and donor doping, electrical resistivity and thermal conductivity of diamond as well as high electric-field breakdown points, that diamond devices could be used at about 30-times higher frequency and more then 8200 times power than silicon devices. Except that, due to high heat resistant of diamond, it is concluded that diamond devices can be used in environment at high temperature, range of 600 o C. (author)

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... exploring about iron-deficiency anemia. Read more New treatments for disorders that lead to iron-deficiency anemia. We are ... and other pathways. This could help develop new therapies for conditions that ... behavior, thinking, and mood during adolescence. Treating anemia in ...

Congenital aplastic anemia caused by mutations in the SBDS gene: A rare presentation of Shwachman-Diamond syndrome

NARCIS (Netherlands)

Kuijpers, Taco W.; Nannenberg, Eline; Alders, Marielle; Bredius, Robbert; Hennekam, Raoul C. M.

2004-01-01

Clinical Findings. Aplastic anemia was diagnosed at birth for a first child from healthy nonconsanguineous parents. The girl had hypoglycemia, which normalized within 2 months. Cow milk allergy was suspected initially, because of skin lesions and diarrhea, followed by severe growth retardation.

Iron deficiency anemia

Science.gov (United States)

Anemia - iron deficiency ... iron from old red blood cells. Iron deficiency anemia develops when your body's iron stores run low. ... You may have no symptoms if the anemia is mild. Most of the time, ... slowly. Symptoms may include: Feeling weak or tired more often ...

Noble gas studies in vapor-growth diamonds: Comparison with shock-produced diamonds and the origin of diamonds in ureilites

Energy Technology Data Exchange (ETDEWEB)

Matsuda, Junichi; Fukunaga, Kazuya; Ito, Keisuke (Kobe Univ. (Japan))

1991-07-01

The authors synthesized vapor-trowth diamonds by two kinds of Chemical Vapor Deposition (CVD) using microwave (MWCVD) and hot filament (HFCVD) ionization of gases, and examined elemental abundances and isotopic compositions of the noble gases trapped in the diamonds. It is remarkable that strong differences existed in the noble gas concentrations in the two kinds of CVD diamonds: large amounts of noble gases were trapped in the MWCVD diamonds, but not in the HFCVD diamonds. The heavy noble gases (Ar to Xe) in the MWCVD diamonds were highly fractionated compared with those in the ambient atmosphere, and are in good agreement with the calculated fractionation patterns for plasma at an electron temperature of 7,000-9,000 K. These results strongly suggest that the trapping mechanism of noble gases in CVD diamonds is ion implantation during diamond growth. The degrees of fractionation of heavy noble gases were also in good agreement with those in ureilites. The vapor-growth hypothesis is discussed in comparison with the impact-shock hypothesis as a better model for the origin of diamonds in ureilites. The diamond (and graphite, amorphous carbon, too) may have been deposited on early condensates such as Re, Ir, W, etc. This model explains the chemical features of vein material in ureilites; the refractory siderophile elements are enriched in carbon and noble gases and low in normal siderophiles. The vapor-growth model is also compatible with the oxygen isotopic data of ureilites which suggests that nebular processes are primarily responsible for the composition of ureilites.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... Topics News & Resources Intramural Research Home / < Back To Health Topics / Iron-Deficiency Anemia Iron-Deficiency Anemia Also known as Leer ... and symptoms as well as complications from iron-deficiency anemia. Research for Your Health The NHLBI is part of the U.S. Department ...

Anemia in Chronic Kidney Disease

Science.gov (United States)

... artérielle Heart Disease Mineral & Bone Disorder Anemia in Chronic Kidney Disease What is anemia? Anemia is a condition in ... as they should. How is anemia related to chronic kidney disease? Anemia commonly occurs in people with chronic kidney ...

Anemia in Chronic Kidney Disease

Science.gov (United States)

... Cysts Solitary Kidney Your Kidneys & How They Work Anemia in Chronic Kidney Disease What is anemia? Anemia is a condition in which the body ... function as well as they should. How is anemia related to chronic kidney disease? Anemia commonly occurs ...

Diamond Synthesis Employing Nanoparticle Seeds

Science.gov (United States)

Uppireddi, Kishore (Inventor); Morell, Gerardo (Inventor); Weiner, Brad R. (Inventor)

2014-01-01

Iron nanoparticles were employed to induce the synthesis of diamond on molybdenum, silicon, and quartz substrates. Diamond films were grown using conventional conditions for diamond synthesis by hot filament chemical vapor deposition, except that dispersed iron oxide nanoparticles replaced the seeding. This approach to diamond induction can be combined with dip pen nanolithography for the selective deposition of diamond and diamond patterning while avoiding surface damage associated to diamond-seeding methods.

Recognition of diamond grains on surface of fine diamond grinding wheel

Institute of Scientific and Technical Information of China (English)

Fengwei HUO; Zhuji JIN; Renke KANG; Dongming GUO; Chun YANG

2008-01-01

The accurate evaluation of grinding wheel sur-face topography, which is necessary for the investigation of the grinding principle, optimism, modeling, and simu-lation of a grinding process, significantly depends on the accurate recognition of abrasive grains from the measured wheel surface. A detailed analysis of the grain size distri-bution characteristics and grain profile wavelength of the fine diamond grinding wheel used for ultra-precision grinding is presented. The requirements of the spatial sampling interval and sampling area for instruments to measure the surface topography of a diamond grinding wheel are discussed. To recognize diamond grains, digital filtering is used to eliminate the high frequency disturb-ance from the measured 3D digital surface of the grinding wheel, the geometric features of diamond grains are then extracted from the filtered 3D digital surface, and a method based on the grain profile frequency characteris-tics, diamond grain curvature, and distance between two adjacent diamond grains is proposed. A 3D surface pro-filer based on scanning white light interferometry is used to measure the 3D surface topography of a #3000 mesh resin bonded diamond grinding wheel, and the diamond grains are then recognized from the 3D digital surface. The experimental result shows that the proposed method is reasonable and effective.

Anisotropic diamond etching through thermochemical reaction between Ni and diamond in high-temperature water vapour.

Science.gov (United States)

Nagai, Masatsugu; Nakanishi, Kazuhiro; Takahashi, Hiraku; Kato, Hiromitsu; Makino, Toshiharu; Yamasaki, Satoshi; Matsumoto, Tsubasa; Inokuma, Takao; Tokuda, Norio

2018-04-27

Diamond possesses excellent physical and electronic properties, and thus various applications that use diamond are under development. Additionally, the control of diamond geometry by etching technique is essential for such applications. However, conventional wet processes used for etching other materials are ineffective for diamond. Moreover, plasma processes currently employed for diamond etching are not selective, and plasma-induced damage to diamond deteriorates the device-performances. Here, we report a non-plasma etching process for single crystal diamond using thermochemical reaction between Ni and diamond in high-temperature water vapour. Diamond under Ni films was selectively etched, with no etching at other locations. A diamond-etching rate of approximately 8.7 μm/min (1000 °C) was successfully achieved. To the best of our knowledge, this rate is considerably greater than those reported so far for other diamond-etching processes, including plasma processes. The anisotropy observed for this diamond etching was considerably similar to that observed for Si etching using KOH.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... Topics section only, or the News and Resources section. NHLBI Entire Site NHLBI Entire Site Health ... español Iron-deficiency anemia is a common type of anemia that occurs if you do not have enough iron in your body. People with mild or moderate iron-deficiency anemia ...

Diamond and Diamond-Like Materials as Hydrogen Isotope Barriers

International Nuclear Information System (INIS)

Foreman, L.R.; Barbero, R.S.; Carroll, D.W.; Archuleta, T.; Baker, J.; Devlin, D.; Duke, J.; Loemier, D.; Trukla, M.

1999-01-01

This is the final report of a two-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The purpose of this project was to develop diamond and diamond-like thin-films as hydrogen isotope permeation barriers. Hydrogen embrittlement limits the life of boost systems which otherwise might be increased to 25 years with a successful non-reactive barrier. Applications in tritium processing such as bottle filling processes, tritium recovery processes, and target filling processes could benefit from an effective barrier. Diamond-like films used for low permeability shells for ICF and HEDP targets were also investigated. Unacceptable high permeabilities for hydrogen were obtained for plasma-CVD diamond-like-carbon films

Predictors of anemia in preschool children: Biomarkers Reflecting Inflammation and Nutritional Determinants of Anemia (BRINDA) project

Science.gov (United States)

Aaron, Grant J; Huang, Jin; Varadhan, Ravi; Temple, Victor; Rayco-Solon, Pura; Macdonald, Barbara

2017-01-01

Background: A lack of information on the etiology of anemia has hampered the design and monitoring of anemia-control efforts. Objective: We aimed to evaluate predictors of anemia in preschool children (PSC) (age range: 6–59 mo) by country and infection-burden category. Design: Cross-sectional data from 16 surveys (n = 29,293) from the Biomarkers Reflecting Inflammation and Nutritional Determinants of Anemia (BRINDA) project were analyzed separately and pooled by category of infection burden. We assessed relations between anemia (hemoglobin concentration anemia (hemoglobin concentration anemia with concomitant iron deficiency (defined as an inflammation-adjusted ferritin concentration anemia in >50% of surveys. Associations between breastfeeding and anemia were attenuated by controlling for child age, which was negatively associated with anemia. The most consistent predictors of severe anemia were malaria, poor sanitation, and underweight. In multivariable pooled models, child age, iron deficiency, and stunting independently predicted anemia and severe anemia. Inflammation was generally associated with anemia in the high- and very high–infection groups but not in the low- and medium-infection groups. In PSC with anemia, 50%, 30%, 55%, and 58% of children had concomitant iron deficiency in low-, medium-, high-, and very high–infection categories, respectively. Conclusions: Although causal inference is limited by cross-sectional survey data, results suggest anemia-control programs should address both iron deficiency and infections. The relative importance of factors that are associated with anemia varies by setting, and thus, country-specific data are needed to guide programs. PMID:28615260

Aplastic Anemia

Science.gov (United States)

Aplastic anemia is a rare but serious blood disorder. If you have it, your bone marrow doesn't make ... blood cells. There are different types, including Fanconi anemia. Causes include Toxic substances, such as pesticides, arsenic, ...

Comparison between beryllium and diamond-backing plates in diamond-anvil cells

DEFF Research Database (Denmark)

Periotto, Benedetta; Nestola, Fabrizio; Balic Zunic, Tonci

2011-01-01

A direct comparison between two complete intensity datasets, collected on the same sample loaded in two identical diamond-anvil pressure cells equipped, respectively, with beryllium and diamond backing plates was performed. The results clearly demonstrate that the use of diamond-backing plates...

Plasma spraying method for forming diamond and diamond-like coatings

Science.gov (United States)

Holcombe, Cressie E.; Seals, Roland D.; Price, R. Eugene

1997-01-01

A method and composition for the deposition of a thick layer (10) of diamond or diamond-like material. The method includes high temperature processing wherein a selected composition (12) including at least glassy carbon is heated in a direct current plasma arc device to a selected temperature above the softening point, in an inert atmosphere, and is propelled to quickly quenched on a selected substrate (20). The softened or molten composition (18) crystallizes on the substrate (20) to form a thick deposition layer (10) comprising at least a diamond or diamond-like material. The selected composition (12) includes at least glassy carbon as a primary constituent (14) and may include at least one secondary constituent (16). Preferably, the secondary constituents (16) are selected from the group consisting of at least diamond powder, boron carbide (B.sub.4 C) powder and mixtures thereof.

Mouse models of Fanconi anemia

International Nuclear Information System (INIS)

Parmar, Kalindi; D'Andrea, Alan; Niedernhofer, Laura J.

2009-01-01

Fanconi anemia is a rare inherited disease characterized by congenital anomalies, growth retardation, aplastic anemia and an increased risk of acute myeloid leukemia and squamous cell carcinomas. The disease is caused by mutation in genes encoding proteins required for the Fanconi anemia pathway, a response mechanism to replicative stress, including that caused by genotoxins that cause DNA interstrand crosslinks. Defects in the Fanconi anemia pathway lead to genomic instability and apoptosis of proliferating cells. To date, 13 complementation groups of Fanconi anemia were identified. Five of these genes have been deleted or mutated in the mouse, as well as a sixth key regulatory gene, to create mouse models of Fanconi anemia. This review summarizes the phenotype of each of the Fanconi anemia mouse models and highlights how genetic and interventional studies using the strains have yielded novel insight into therapeutic strategies for Fanconi anemia and into how the Fanconi anemia pathway protects against genomic instability.

Mouse models of Fanconi anemia

Energy Technology Data Exchange (ETDEWEB)

Parmar, Kalindi; D' Andrea, Alan [Department of Radiation Oncology, Dana-Farber Cancer Institute, Harvard Medical School, 44 Binney Street, Boston, MA 02115 (United States); Niedernhofer, Laura J., E-mail: niedernhoferl@upmc.edu [Department of Microbiology and Molecular Genetics, University of Pittsburgh School of Medicine and Cancer Institute, 5117 Centre Avenue, Hillman Cancer Center, Research Pavilion 2.6, Pittsburgh, PA 15213-1863 (United States)

2009-07-31

Fanconi anemia is a rare inherited disease characterized by congenital anomalies, growth retardation, aplastic anemia and an increased risk of acute myeloid leukemia and squamous cell carcinomas. The disease is caused by mutation in genes encoding proteins required for the Fanconi anemia pathway, a response mechanism to replicative stress, including that caused by genotoxins that cause DNA interstrand crosslinks. Defects in the Fanconi anemia pathway lead to genomic instability and apoptosis of proliferating cells. To date, 13 complementation groups of Fanconi anemia were identified. Five of these genes have been deleted or mutated in the mouse, as well as a sixth key regulatory gene, to create mouse models of Fanconi anemia. This review summarizes the phenotype of each of the Fanconi anemia mouse models and highlights how genetic and interventional studies using the strains have yielded novel insight into therapeutic strategies for Fanconi anemia and into how the Fanconi anemia pathway protects against genomic instability.

Severe Aplastic Anemia (SAA)

Science.gov (United States)

... page Print this page My Cart Severe aplastic anemia (SAA) Severe aplastic anemia (SAA) is a disease ... leukemia (ALL) Other diseases What is severe aplastic anemia (SAA)? SAA is a bone marrow disease. The ...

Fanconi's Anemia Effect or Sickle Cell Anemia Effect: That is the Question.

Science.gov (United States)

Unal, Sule; Chui, David H K; Gumruk, Fatma

2015-01-01

A 16-year-old boy who was diagnosed to have sickle cell anemia was referred to our center. The parental consanguinity, growth retardation and dysmorphic features prompted a search for possible Fanconi's Anemia (FA). The diepoxybutane (DEB) test was positive, confirming FA. The interaction of both diseases might account for his relatively mild phenotype in terms of both sickle cell anemia (or Hb S, HBB: c.20A > T) and FA. The high Hb F level that might be related to concomitant FA, may have caused a milder phenotype of sickle cell anemia, whereas nitric oxide (NO) depletion as a consequence of sickle cell anemia, may have caused a delay in the bone marrow failure of FA.

Diamond film growth with modification properties of adhesion between substrate and diamond film

Directory of Open Access Journals (Sweden)

Setasuwon P.

2004-03-01

Full Text Available Diamond film growth was studied using chemical vapor deposition (CVD. A special equipment was build in-house, employing a welding torch, and substrate holder with a water-cooling system. Acetylene and oxygen were used as combustion gases and the substrate was tungsten carbide cobalt. It was found that surface treatments, such as diamond powder scratching or acid etching, increase the adhesion and prevent the film peel-off. Diamond powder scratching and combined diamond powder scratching with acid etching gave the similar diamond film structure with small grain and slightly rough surface. The diamond film obtained with both treatments has high adhesion and can withstand internal stress better than ones obtained by untreated surface or acid etching alone. It was also found that higher substrate temperature produced smoother surface and more uniform diamond grain.

Self-composite comprised of nanocrystalline diamond and a non-diamond component useful for thermoelectric applications

Science.gov (United States)

Gruen, Dieter M [Downers Grove, IL

2009-08-11

One provides nanocrystalline diamond material that comprises a plurality of substantially ordered diamond crystallites that are sized no larger than about 10 nanometers. One then disposes a non-diamond component within the nanocrystalline diamond material. By one approach this non-diamond component comprises an electrical conductor that is formed at the grain boundaries that separate the diamond crystallites from one another. The resultant nanowire is then able to exhibit a desired increase with respect to its ability to conduct electricity while also preserving the thermal conductivity behavior of the nanocrystalline diamond material.

The Prevalence of Anemia and Moderate-Severe Anemia in the US Population (NHANES 2003-2012)

Science.gov (United States)

2016-01-01

Since anemia is associated with poor health outcomes, the prevalence of anemia is a significant public health indicator. Even though anemia is primarily caused by iron deficiency, low oxygen-carrying capacity may result from other conditions such as chronic diseases, which remain a relevant health concern in the United States. However, studies examining current rates of anemia in the total US population and in more specific subgroups are limited. Data from five National Health and Nutrition Examination Surveys (NHANES) from 2003 to 2012 were analyzed to assess two outcomes: anemia and moderate-severe anemia, which were based upon serum hemoglobin levels (Hb) as per World Health Organization (WHO) definitions. Statistical analysis using SAS examined temporal trends and the prevalence of anemia among sexes, age groups, and races/ethnicities. The study estimated that an average of 5.6% of the U.S. population met the criteria for anemia and 1.5% for moderate-severe anemia during this 10-year period. High-risk groups such as pregnant women, elderly persons, women of reproductive age, non-Hispanic blacks, and Hispanics were identified, and relationships between multiple risk factors were examined. Rates of anemia in men increased monotonically with age, while that of women increased bimodally with peaks in age group 40–49 years and 80–85 years. The effect of risk factors was observed to compound. For instance, the prevalence of anemia in black women aged 80–85 years was 35.6%, 6.4 times higher than the population average. Moreover, anemia is a growing problem because of the increased prevalence of anemia (4.0% to 7.1%) and moderate-severe anemia (1.0% to 1.9%), which nearly doubled from 2003–2004 to 2011–2012. Thus, these results augment the current knowledge on anemia prevalence, severity, and distribution among subgroups in the US and raised anemia as an issue that requires urgent public health intervention. PMID:27846276

Diamonds for beam instrumentation

International Nuclear Information System (INIS)

Griesmayer, Erich

2013-01-01

Diamond is perhaps the most versatile, efficient and radiation tolerant material available for use in beam detectors with a correspondingly wide range of applications in beam instrumentation. Numerous practical applications have demonstrated and exploited the sensitivity of diamond to charged particles, photons and neutrons. In this paper, a brief description of a generic diamond detector is given and the interaction of the CVD diamond detector material with protons, electrons, photons and neutrons is presented. Latest results of the interaction of sCVD diamond with 14 MeV mono-energetic neutrons are shown.

Kankan diamonds (Guinea) III: δ13C and nitrogen characteristics of deep diamonds

Science.gov (United States)

Stachel, T.; Harris, J. W.; Aulbach, S.; Deines, P.

Diamonds from the Kankan area in Guinea formed over a large depth profile beginning within the cratonic mantle lithosphere and extending through the asthenosphere and transition zone into the lower mantle. The carbon isotopic composition, the concentration of nitrogen impurities and the nitrogen aggregation level of diamonds representing this entire depth range have been determined. Peridotitic and eclogitic diamonds of lithospheric origin from Kankan have carbon isotopic compositions (δ13C: peridotitic -5.4 to -2.2‰ eclogitic -19.7 to -0.7‰) and nitrogen characteristics (N: peridotitic 17-648 atomic ppm; eclogitic 0-1,313 atomic ppm; aggregation from IaA to IaB) which are generally typical for diamonds of these two suites worldwide. Geothermobarometry of peridotitic and eclogitic inclusion parageneses (worldwide sources) indicates that both suites formed under very similar conditions within the cratonic lithosphere, which is not consistent with a derivation of diamonds with light carbon isotopic composition from subducted organic matter within subducting oceanic slabs. Diamonds containing majorite garnet inclusions fall to the isotopically heavy side (δ13C: -3.1‰ to +0.9‰) of the worldwide diamond population. Nitrogen contents are low (0-126 atomic ppm) and one of the two nitrogen-bearing diamonds shows such a low level of nitrogen aggregation (30% B-centre) that it cannot have been exposed to ambient temperatures of the transition zone (>=1,400 °C) for more than 0.2 Ma. This suggests rapid upward transport and formation of some Kankan diamonds pene-contemporaneous to Cretaceous kimberlite activity. Similar to these diamonds from the asthenosphere and the transition zone, lower mantle diamonds show a small shift towards isotopic heavy compositions (-6.6 to -0.5‰, mode at -3.5‰). As already observed for other mines, the nitrogen contents of lower mantle diamonds were below detection (using FTIRS). The mutual shift of sublithospheric diamonds towards

Pulsed laser deposition of metallic films on the surface of diamond particles for diamond saw blades

International Nuclear Information System (INIS)

Jiang Chao; Luo Fei; Long Hua; Hu Shaoliu; Li Bo; Wang Youqing

2005-01-01

Ti or Ni films have been deposited on the diamond particle surfaces by pulsed laser deposition. Compressive resistance of the uncoated and coated diamond particles was measured, respectively, in the experiments. The compressive resistance of the Ti-coated diamonds particles was found much higher than that of the uncoated ones. It increased by 39%. The surface morphology is observed by the metallography microscope. The surface of the uncoated diamonds particles had many hollows and flaws, while the surface of Ni-coated diamond particles was flat and smooth, and the surface of Ti-coated diamond particles had some metal masses that stood out of the surface of the Ti-coated film. The components of the metallic films of diamond particles were examined by X-ray diffractometry (XRD). TiC was found formed on the Ti-coated diamond surface, which resulted in increased surface bonding strength between the diamond particles and the Ti films. Meanwhile, TiC also favored improving the bonding strength between the coated diamond particles and the binding materials. Moreover, the bending resistance of the diamond saw blade made of Ti-coated diamond was drastically higher than that of other diamond saw blades, which also played an important role in improving the blade's cutting ability and lifetime. Therefore, it was most appropriate that the diamond saw blade was made of Ti-coated diamond particles rather than other materials

PREFACE: Science's gem: diamond science 2009 Science's gem: diamond science 2009

Science.gov (United States)

Mainwood, Alison; Newton, Mark E.; Stoneham, Marshall

2009-09-01

Natural diamond has been valued for its appearance and mechanical properties for at least two thousand years. As a gem stone diamond is unsurpassed. However, scientific work, especially in the last 20 years, has demonstrated that diamond has numerous surprising properties and many unique ones. Some of the extreme properties have been known for many years, but the true scale of diamond's other highly desirable features is still only coming to light as control in the synthesis of diamond, and hence material perfection, improves. The ultimate prize for man-made diamond is surely not in the synthesis of gem stones, but in delivering technological solutions enabled by diamond to the challenges facing our society today. If the special properties are to be exploited to their full potential, at least four crucial factors must be considered. First, there must be sufficient scientific understanding of diamond to make applications effective, efficient and economical. Secondly, the means of fabrication and control of properties have to be achieved so that diamond's role can be optimised. Thirdly, it is not enough that its properties are superior to existing materials: they must be so much better that it is worth initiating new technologies to exploit them. Finally, any substantial applications will have to address the society's major needs worldwide. The clear technology drivers for the 21st century come from the biomedical technologies, the demand for energy subject to global constraints, and the information technologies, where perhaps diamond will provide the major enabling technology [1]. The papers in this volume concern the solid state physics of diamond, and primarily concern the first two factors: understanding, and control of properties. They address many of the outstanding basic problems, such as the identification of existing defects, which affect the material's properties, both desirable and less so. Regarding future substantial applications, one paper discusses

Fanconi Anemia Research Fund

Science.gov (United States)

... Support Publications Fundraising News What is the Fanconi Anemia Research Fund? Fanconi anemia is an inherited disease that can lead to ... population. Lynn and Dave Frohnmayer started the Fanconi Anemia Research Fund, in 1989 to find effective treatments ...

Thermally stable diamond brazing

Science.gov (United States)

Radtke, Robert P [Kingwood, TX

2009-02-10

A cutting element and a method for forming a cutting element is described and shown. The cutting element includes a substrate, a TSP diamond layer, a metal interlayer between the substrate and the diamond layer, and a braze joint securing the diamond layer to the substrate. The thickness of the metal interlayer is determined according to a formula. The formula takes into account the thickness and modulus of elasticity of the metal interlayer and the thickness of the TSP diamond. This prevents the use of a too thin or too thick metal interlayer. A metal interlayer that is too thin is not capable of absorbing enough energy to prevent the TSP diamond from fracturing. A metal interlayer that is too thick may allow the TSP diamond to fracture by reason of bending stress. A coating may be provided between the TSP diamond layer and the metal interlayer. This coating serves as a thermal barrier and to control residual thermal stress.

Iron deficiency anemia and megaloblastic anemia in obese patients.

Science.gov (United States)

Arshad, Mahmoud; Jaberian, Sara; Pazouki, Abdolreza; Riazi, Sajedeh; Rangraz, Maryam Aghababa; Mokhber, Somayyeh

2017-03-01

The association between obesity and different types of anemia remained uncertain. The present study aimed to assess the relation between obesity parameters and the occurrence of iron deficiency anemia and also megaloblastic anemia among Iranian population. This cross-sectional study was performed on 1252 patients with morbid obesity that randomly selected from all patients referred to Clinic of obesity at Rasoul-e-Akram Hospital in 2014. The morbid obesity was defined according to the guideline as body mass index (BMI) equal to or higher than 40 kg/m2. Various laboratory parameters including serum levels of hemoglobin, iron, ferritin, folic acid, and vitamin B12 were assessed using the standard laboratory techniques. BMI was adversely associated with serum vitamin B12, but not associated with other hematologic parameters. The overall prevalence of iron deficiency anemia was 9.8%. The prevalence of iron deficiency anemia was independent to patients' age and also to body mass index. The prevalence of vitamin B12 deficiency was totally 20.9%. According to the multivariable logistic regression model, no association was revealed between BMI and the occurrence of iron deficiency anemia adjusting gender and age. A similar regression model showed that higher BMI could predict occurrence of vitamin B12 deficiency in morbid obese patients. Although iron deficiency is a common finding among obese patients, vitamin B12 deficiency is more frequent so about one-fifth of these patients suffer vitamin B12 deficiency. In fact, the exacerbation of obesity can result in exacerbation of vitamin B12 deficiency.

MR findings in pituitary haemosiderosis

International Nuclear Information System (INIS)

Ambrosetto, P.; Zucchini, S.; Cicognani, A.; Cacciari, E.

1998-01-01

A girl with Diamond-Blackfan syndrome and hypopituitarism was suspected of having pituitary haemosiderosis because of the clinical picture and the long history of blood transfusions. On T1-weighted MR images the pituitary exhibited a markedly hypointense anterior lobe (mimicking the empty sella), suggesting iron deposition, while on T2W MRI the low signal of the pituitary was surrounded by the high signal of the CSF. MR may be considered the examination of choice for detecting iron overload in the pituitary. (orig.)

Diamond growth on an array of seeds: The revolution of diamond production

Energy Technology Data Exchange (ETDEWEB)

Sung, James C. [KINIK Company, 64, Chung-San Rd., Ying-Kuo, Taipei Hsien 239, Taiwan (China) and National Taiwan University, Taipei 106, Taiwan (China) and National Taipei University of Technology, Taipei 106, Taiwan (China)]. E-mail: sung@kinik.com.tw; Sung, Michael [Massachusetts Institute of Technology, Cambridge, MA (United States); Sung, Emily [Johnson and Johnson, Freemont, CA (United States)

2006-03-01

The consumption of saw diamond grits is a measure of a nation's constructional activities. The per capita consumption for the world is about 0.7 carats in 2004, and in China, about 3 carats. The manufacture of large saw diamond grits requires stringent control of pressure and temperature that only a few companies can master. However, with the implementation of a novel diamond seeding technology, large saw diamond grits of extreme quality can be mass produced. With this breakthrough, the prices of saw grit will plummet in the near future that should benefit the constructional industry worldwide. Moreover, electronic or thermal grade of large diamond crystals may be produced for applications in semiconductor, electronic or optical industry.

Diamond growth on an array of seeds: The revolution of diamond production

International Nuclear Information System (INIS)

Sung, James C.; Sung, Michael; Sung, Emily

2006-01-01

The consumption of saw diamond grits is a measure of a nation's constructional activities. The per capita consumption for the world is about 0.7 carats in 2004, and in China, about 3 carats. The manufacture of large saw diamond grits requires stringent control of pressure and temperature that only a few companies can master. However, with the implementation of a novel diamond seeding technology, large saw diamond grits of extreme quality can be mass produced. With this breakthrough, the prices of saw grit will plummet in the near future that should benefit the constructional industry worldwide. Moreover, electronic or thermal grade of large diamond crystals may be produced for applications in semiconductor, electronic or optical industry

Diamond-cleaning investigations

International Nuclear Information System (INIS)

Derry, T.E.

Four parcels of diamonds which either had or had not been cleaned using the usual techniques, chiefly involving etch in molten potassium nitrate were supplied by De Beers Diamond Research Laboratories. Each parcel contained about 40 stones, amounting to about 10 carats. Half the diamonds in each parcel were cleaned by a standard procedure involving half an hours ultrasonic agitation in a 20% solution of the commercial detergent 'Contrad' which is effectively a surfactant and chelating agent. Visual comparisons by a number of observers who were not told the stones' histories, established that these diamonds generally had a more sparkling appearance after the cleaning procedure had been applied

Iron, Anemia, and Iron Deficiency Anemia among Young Children in the United States

OpenAIRE

Gupta, Priya M.; Perrine, Cria G.; Mei, Zuguo; Scanlon, Kelley S.

2016-01-01

Iron deficiency and anemia are associated with impaired neurocognitive development and immune function in young children. Total body iron, calculated from serum ferritin and soluble transferrin receptor concentrations, and hemoglobin allow for monitoring of the iron and anemia status of children in the United States. The purpose of this analysis is to describe the prevalence of iron deficiency (ID), anemia, and iron deficiency anemia (IDA) among children 1–5 years using data from the 2007–201...

Identification and fine mapping of nuclear and nucleolar localization signals within the human ribosomal protein S17.

Directory of Open Access Journals (Sweden)

Scott P Kenney

Full Text Available Human ribosomal protein S17 (RPS17 is mutated in Diamond-Blackfan Anemia (DBA, a bone marrow disorder that fails to produce sufficient red blood cells leading to anemia. Recently, an RPS17 protein sequence was also found to be naturally inserted in the genome of hepatitis E virus (HEV from patients chronically-infected by HEV. The role of RPS17 in HEV replication and pathogenesis remains unknown due to the lack of knowledge about how RPS17 functions at a molecular level. Understanding the biological function of RPS17 is critical for elucidating its role in virus infection and DBA disease processes. In this study we probed the subcellular distribution of normal and mutant RPS17 proteins in a human liver cell line (Huh7. RPS17 was primarily detected within the nucleus, and more specifically within the nucleoli. Using a transient expression system in which RPS17 or truncations were expressed as fusions with enhanced yellow fluorescent protein (eYFP, we were able to identify and map, for the first time, two separate nuclear localization signals (NLSs, one to the first 13 amino acids of the amino-terminus of RPS17 and the other within amino acids 30-60. Additionally, we mapped amino acid sequences required for nucleolar accumulation of RPS17 to amino acids 60-70. Amino acids 60-70 possess a di-RG motif that may be necessary for nucleolar retention of RPS17. The results from this study enhance our knowledge of RSP17 and will facilitate future mechanistic studies about the roles of RSP17 in hepatitis E and DBA disease processes.

Diamond pixel modules

International Nuclear Information System (INIS)

Asner, D.; Barbero, M.; Bellini, V.; Belyaev, V.; Brom, J-M.; Bruzzi, M.; Chren, D.; Cindro, V.; Claus, G.; Cristinziani, M.; Costa, S.; D'Alessandro, R.; Boer, W. de; Dobos, D.; Dolenc, I.; Dulinski, W.; Duris, J.; Eremin, V.; Eusebi, R.; Frais-Koelbl, H.

2011-01-01

With the commissioning of the LHC in 2010 and upgrades expected in 2015, ATLAS and CMS are planning to upgrade their innermost tracking layers with radiation hard technologies. Chemical Vapor Deposition diamond has been used extensively in beam conditions monitors as the innermost detectors in the highest radiation areas of BaBar, Belle, CDF and all LHC experiments. This material is now being considered as a sensor material for use very close to the interaction region where the most extreme radiation conditions exist. Recently the RD42 collaboration constructed, irradiated and tested polycrystalline and single-crystal chemical vapor deposition diamond sensors to the highest fluences expected at the super-LHC. We present beam test results of chemical vapor deposition diamond up to fluences of 1.8x10 16 protons/cm 2 illustrating that both polycrystalline and single-crystal chemical vapor deposition diamonds follow a single damage curve. We also present beam test results of irradiated complete diamond pixel modules.

Diamond pixel modules

Energy Technology Data Exchange (ETDEWEB)

Asner, D. [Carleton University, Ottawa (Canada); Barbero, M. [Universitaet Bonn (Germany); Bellini, V. [INFN/University of Catania (Italy); Belyaev, V. [MEPHI Institute, Moscow (Russian Federation); Brom, J-M. [IPHC, Strasbourg (France); Bruzzi, M. [INFN/University of Florence (Italy); Chren, D. [Czech Technical University, Prague (Czech Republic); Cindro, V. [Jozef Stefan Institute, Ljubljana (Slovenia); Claus, G. [IPHC, Strasbourg (France); Cristinziani, M. [Universitaet Bonn (Germany); Costa, S. [INFN/University of Catania (Italy); D' Alessandro, R. [Department of Energetics/INFN Florence (Italy); Boer, W. de [Universitaet Karlsruhe, Karlsruhe (Germany); Dobos, D. [CERN, Geneva (Switzerland); Dolenc, I. [Jozef Stefan Institute, Ljubljana (Slovenia); Dulinski, W. [IPHC, Strasbourg (France); Duris, J. [UCLA, Los Angeles, CA (United States); Eremin, V. [Ioffe Institute, St. Petersburg (Russian Federation); Eusebi, R. [FNAL, Batavia (United States); Frais-Koelbl, H. [Fachhochschule fuer Wirtschaft und Technik, Wiener Neustadt (Austria)

2011-04-21

With the commissioning of the LHC in 2010 and upgrades expected in 2015, ATLAS and CMS are planning to upgrade their innermost tracking layers with radiation hard technologies. Chemical Vapor Deposition diamond has been used extensively in beam conditions monitors as the innermost detectors in the highest radiation areas of BaBar, Belle, CDF and all LHC experiments. This material is now being considered as a sensor material for use very close to the interaction region where the most extreme radiation conditions exist. Recently the RD42 collaboration constructed, irradiated and tested polycrystalline and single-crystal chemical vapor deposition diamond sensors to the highest fluences expected at the super-LHC. We present beam test results of chemical vapor deposition diamond up to fluences of 1.8x10{sup 16} protons/cm{sup 2} illustrating that both polycrystalline and single-crystal chemical vapor deposition diamonds follow a single damage curve. We also present beam test results of irradiated complete diamond pixel modules.

Diamond nanophotonics

Directory of Open Access Journals (Sweden)

Katja Beha

2012-12-01

Full Text Available We demonstrate the coupling of single color centers in diamond to plasmonic and dielectric photonic structures to realize novel nanophotonic devices. Nanometer spatial control in the creation of single color centers in diamond is achieved by implantation of nitrogen atoms through high-aspect-ratio channels in a mica mask. Enhanced broadband single-photon emission is demonstrated by coupling nitrogen–vacancy centers to plasmonic resonators, such as metallic nanoantennas. Improved photon-collection efficiency and directed emission is demonstrated by solid immersion lenses and micropillar cavities. Thereafter, the coupling of diamond nanocrystals to the guided modes of micropillar resonators is discussed along with experimental results. Finally, we present a gas-phase-doping approach to incorporate color centers based on nickel and tungsten, in situ into diamond using microwave-plasma-enhanced chemical vapor deposition. The fabrication of silicon–vacancy centers in nanodiamonds by microwave-plasma-enhanced chemical vapor deposition is discussed in addition.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... your doctor may recommend you eat heart-healthy foods or control other conditions that can cause iron-deficiency anemia. Blood tests to screen for iron-deficiency anemia To screen ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... from developing iron-deficiency anemia. Foods that are good sources of iron include dried beans, dried fruits, eggs, lean red meat, ... signs of iron-deficiency anemia include: Brittle nails ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... for iron-deficiency anemia. Lifestyle habits Certain lifestyle habits may increase your risk for iron-deficiency anemia, including: Vegetarian or vegan eating patterns. Not eating enough iron-rich foods, such ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... Hemophilia Pernicious Anemia Restless Legs Syndrome Von Willebrand Disease Other Resources NHLBI resources Your Guide to Anemia [PDF, 1.54MB] Cardiovascular Health Study Recipient Epidemiology Donor Studies (REDS) program ...

Sickle cell anemia

Science.gov (United States)

Anemia - sickle cell; Hemoglobin SS disease (Hb SS); Sickle cell disease ... Sickle cell anemia is caused by an abnormal type of hemoglobin called hemoglobin S. Hemoglobin is a protein inside red blood cells ...

Vitamin Deficiency Anemia

Science.gov (United States)

... are unique to specific vitamin deficiencies. Folate-deficiency anemia risk factors include: Undergoing hemodialysis for kidney failure. ... the metabolism of folate. Vitamin B-12 deficiency anemia risk factors include: Lack of intrinsic factor. Most ...

Drug-induced immune hemolytic anemia

Science.gov (United States)

Immune hemolytic anemia secondary to drugs; Anemia - immune hemolytic - secondary to drugs ... Drugs that can cause this type of hemolytic anemia include: Cephalosporins (a class of antibiotics), most common ...

Thiamine– Responsive Megaloblastic Anemia Syndrome

Directory of Open Access Journals (Sweden)

F Motavaselian

2009-01-01

Full Text Available Thiamine Responsive megaloblastic anemia in DIDMOA (Wolfram syndrome has an autosomal- recessive mode of inheritance . Megaloblastic anemia and sideroblastic anemia is accompanied by diabetes insipidus (DI, diabetes mellitus (DM ,optic atrophy (OA and deafness (D. Neutropenia and thrombocytopenia are also present. We report a 7 month old girl with congenital macrocytic anemia; a rare clinical feature of Wolfram,s syndrome with increased plasma levels of blood glucose, both of which dramatically responded to administration of thiamine in large doses . The patient also had neurosensorial deafness, but no improvement was observed in the deafness. We presented the case because thiamine-responsive megaloblastic anemia is a rare clinical presentation of Wolfram syndrome and after institution of treatment with thiamine, the anemia and hyperglycemia returned to normal.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... may be diagnosed with iron-deficiency anemia if you have low iron or ferritin levels in your blood. More testing may be needed to rule out other types of anemia. Tests for gastrointestinal ...

Optical engineering of diamond

CERN Document Server

Rabeau, James R

2013-01-01

This is the first comprehensive book on the engineering of diamond optical devices. It will give readers an up-to-date account of the properties of optical quality synthetic diamond (single crystal, nanodiamond and polycrystalline) and reviews the large and growing field of engineering of diamond-based optical devices, with applications in quantum computation, nano-imaging, high performance lasers, and biomedicine. It aims to provide scientists, engineers and physicists with a valuable resource and reference book for the design and performance of diamond-based optical devices.

Status and applications of diamond and diamond-like materials: An emerging technology

Science.gov (United States)

1990-01-01

Recent discoveries that make possible the growth of crystalline diamond by chemical vapor deposition offer the potential for a wide variety of new applications. This report takes a broad look at the state of the technology following from these discoveries in relation to other allied materials, such as high-pressure diamond and cubic boron nitride. Most of the potential defense, space, and commercial applications are related to diamond's hardness, but some utilize other aspects such as optical or electronic properties. The growth processes are reviewed, and techniques for characterizing the resulting materials' properties are discussed. Crystalline diamond is emphasized, but other diamond-like materials (silicon carbide, amorphous carbon containing hydrogen) are also examined. Scientific, technical, and economic problem areas that could impede the rapid exploitation of these materials are identified. Recommendations are presented covering broad areas of research and development.

Anemia of Chronic Disease and Iron Deficiency Anemia in Inflammatory Bowel Diseases: Pathophysiology, Diagnosis, and Treatment.

Science.gov (United States)

Murawska, Natalia; Fabisiak, Adam; Fichna, Jakub

2016-05-01

Anemia coexists with inflammatory bowel disease (IBD) in up to two-thirds of patients, significantly impairing quality of life. The most common types of anemia in patients with IBD are iron deficiency anemia and anemia of chronic disease, which often overlap. In most cases, available laboratory tests allow successful diagnosis of iron deficiency, where difficulties appear, recently established indices such as soluble transferrin-ferritin ratio or percentage of hypochromic red cells are used. In this review, we discuss the management of the most common types of anemia in respect of the latest available data. Thus, we provide the mechanisms underlying pathophysiology of these entities; furthermore, we discuss the role of hepcidin in developing anemia in IBD. Next, we present the treatment options for each type of anemia and highlight the importance of individual choice of action. We also focus on newly developed intravenous iron preparations and novel, promising drug candidates targeting hepcidin. Concurrently, we talk about difficulties in differentiating between the true and functional iron deficiency, and discuss tools facilitating the process. Finally, we emphasize the importance of proper diagnosis and treatment of anemia in IBD. We conclude that management of anemia in patients with IBD is tricky, and appropriate screening of patients regarding anemia is substantial.

Anemia of Chronic Liver Diseases

International Nuclear Information System (INIS)

Shin, Hyun Chung; Lee, Jhung Sang; Koh, Chang Soon; Lee, Mun Ho

1971-01-01

The pathogenetic mechanisms of anemia in patients with chronic liver disease were observed. Seventeen patients with moderate to advanced hepatic diseases were studied by various methods. Only patients without previous blood loss were included : 14 had cirrhosis, 2 had active chronic hepatitis, and one had inferior vena cava obstruction with associated liver cirrhosis. The followings were the results: 1. The anemia based on red blood cell count, Hb., and Ht. was found in 76.5-78.6% of the patients. 2. Red cell indices indicated that normo-macrocytic and normochromic anemia was present is the majority of the patients. 3. No evidence of megaloblastic anemia was found on the basis of the morphological examinations. 4. Serum iron, TIBC, % saturation and iron content in the bone marrow indicated that iron deficiency anemia was present in about half of the patients. 5. In the view of the erythrocyte dynamics, primary increase in the red cell destruction was ascribed to the cause of the anemia. 6. Decrease in the red cell survival time was not correlated with MCV, % saturation and S.L. ratio. Also, hemoglobin level was not correlated with MCV, % saturation and T 50 Cr. Therefore, multiple causes may be involved in the pathogenesis of the anemia. 7. Anemia as determined by the red cell volume was found in only 60% of the patients. It may be possible that hemodilutional anemia is present.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... deficiency anemia can cause serious complications, including heart failure and development delays in children. Explore this Health ... to iron-deficiency anemia include: End-stage kidney failure, where there is blood loss during dialysis. People ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... deficiency anemia can cause serious complications, including heart failure and development delays in children. Explore this Health ... lead to iron-deficiency anemia include: End-stage kidney failure, where there is blood loss during dialysis. ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... iron-deficiency anemia early in life affects later behavior, thinking, and mood during adolescence. Treating anemia in ... Visit Children and Clinical Studies to hear experts, parents, and children talk about their experiences with clinical ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... contribute to differences in disease severity and how patients respond to treatment. The NHLBI Strategic Vision highlights ... Anemia in Chronic Kidney Disease (National Institute of Diabetes and Digestive and Kidney Diseases) Avoiding Anemia (National ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... to improve health through research and scientific discovery. Improving health with current research Learn about the following ... deficiency anemia early in life affects later behavior, thinking, and mood during adolescence. Treating anemia in premature ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... with the Eunice Kennedy Shriver National Institute of Child Health and Human Development, we are investigating how ... Anemia in Chronic Kidney Disease (National Institute of Diabetes and Digestive and Kidney Diseases) Avoiding Anemia (National ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... iron-deficiency anemia. These conditions include: Intestinal and digestive conditions, such as celiac disease; inflammatory bowel diseases, ... iron-deficiency anemia , such as bleeding in the digestive or urinary tract or heavy menstrual bleeding, your ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... mg and women need 18 mg. After age 51, both men and women need 8 mg. Pregnant ... for iron-deficiency anemia. Learn about exciting research areas that NHLBI is exploring about iron-deficiency anemia. ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... heart failure . Increased risk of infections Motor or cognitive development delays in children Pregnancy complications, such as ... for iron-deficiency anemia. Learn about exciting research areas that NHLBI is exploring about iron-deficiency anemia. ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... heavy menstrual periods. Individuals with a gene for hemophilia, including symptomatic female carriers who have heavy menstrual ... Heart-Healthy Lifestyle Changes Heart Failure Hemolytic Anemia Hemophilia Pernicious Anemia Restless Legs Syndrome Von Willebrand Disease ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... conditions that can cause iron-deficiency anemia. Blood tests to screen for iron-deficiency anemia To screen ... the size of your liver and spleen. Blood tests Based on results from blood tests to screen ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... less than 12 g/dl for women is diagnostic of anemia. In iron-deficiency anemia, red blood ... both full-term and preterm infants. Look for Diagnosis will explain tests and procedures that your doctor ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... iron-fortified foods that have iron added. Vegetarian diets can provide enough iron if you choose nonmeat ... Anemia in Chronic Kidney Disease (National Institute of Diabetes and Digestive and Kidney Diseases) Avoiding Anemia (National ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... less than 12 g/dl for women is diagnostic of anemia. In iron-deficiency anemia, red blood ... physical exam, or order blood tests or other diagnostic tests. Physical exam Your doctor may ask about ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... and pregnancy. Good sources of iron are meat, poultry, fish, and iron-fortified foods that have iron ... Anemia Restless Legs Syndrome Von Willebrand Disease Other Resources NHLBI resources Your Guide to Anemia [PDF, 1. ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... learning how having iron-deficiency anemia early in life affects later behavior, thinking, and mood during adolescence. ... iron-deficiency anemia in blood donors affects the quality of donated red blood cells, such as how ...

Side Effects: Anemia

Science.gov (United States)

Anemia is a side effect of cancer treatments, including chemotherapy and radiation therapy. It can make women and men feel fatigued, dizzy, and short of breath. Learn how to manage fatigue caused by anemia during cancer treatment.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... endoscopy or colonoscopy, to stop bleeding. Healthy lifestyle changes To help you meet your daily recommended iron ... iron-deficiency anemia early in life affects later behavior, thinking, and mood during adolescence. Treating anemia in ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... leaving cells where it is stored or from being absorbed in the duodenum, the first part of ... treatments for iron-deficiency anemia. Living With After being diagnosed with iron-deficiency anemia, it is important ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... iron-deficiency anemia. Search the NIH Research Portfolio Online Reporting Tools (RePORT) to learn about research that ... iron-deficiency anemia in blood donors affects the quality of donated red blood cells, such as how ...

Cancer-related anemia

International Nuclear Information System (INIS)

Abdel-Rzaeq, Hikmat N.

2004-01-01

Anemia is the most common hematological abnormality in cancer patients is often under-recognized and undertreated. The pathogenesis of cancer anemia is complex and most of time multifactorial; involving factors related to the tumor itself or its therapy. While anemia can be present in a wide range of symptoms, involing almost every organ, it is beleived that it contributes much to cancer-related-fatigue, one of the most common symptoms in cancer patients. In addition there is increasing evidence to suggest that anemia is an independent factor adversely affecting tumor reponse and patient survival. While blood transfusion was the only option to treat cancer related anemia, the use of recombinant human erythropoietin (rHuEPO) is becomig the new standard of care, more so with the recent studies demonstrating the feasibility of a sigle weekly injection .Things are even getting better with the recent approval of a new form of rHuEPO; Darbepoetin an analogue with a 3-fold longer half-life. In addition to its effects in raising homoglobin, several well controlled studies demonstrated decrease in transfusion requirementsand better qualify of life assessed objectively using standard assesments scales. (author)

Iron deficiency or anemia of inflammation? : Differential diagnosis and mechanisms of anemia of inflammation.

Science.gov (United States)

Nairz, Manfred; Theurl, Igor; Wolf, Dominik; Weiss, Günter

2016-10-01

Iron deficiency and immune activation are the two most frequent causes of anemia, both of which are based on disturbances of iron homeostasis. Iron deficiency anemia results from a reduction of the body's iron content due to blood loss, inadequate dietary iron intake, its malabsorption, or increased iron demand. Immune activation drives a diversion of iron fluxes from the erythropoietic bone marrow, where hemoglobinization takes place, to storage sites, particularly the mononuclear phagocytes system in liver and spleen. This results in iron-limited erythropoiesis and anemia. This review summarizes current diagnostic and pathophysiological concepts of iron deficiency anemia and anemia of inflammation, as well as combined conditions, and provides a brief outlook on novel therapeutic options.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... other conditions that can cause iron-deficiency anemia. Blood tests to screen for iron-deficiency anemia To screen ... check the size of your liver and spleen. Blood tests Based on results from blood tests to screen ...

Sickle cell anemia.

OpenAIRE

ŘÍHOVÁ, Tereza

2013-01-01

This thesis is about the disease called sickle cell anemia, or drepanocytosis. In this thesis is described the history of the disease, pathophysiology, laboratory features, various clinical features, diferencial diagnosis, quality of life in sickle cell anemia and therapy.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... blocks the intestine from taking up iron. Other medical conditions Other medical conditions that may lead to iron-deficiency anemia ... daily amount of iron. If you have other medical conditions that cause iron-deficiency anemia , such as ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... hemoglobin levels. This was associated with a greater risk of death even with mild anemia. Now, anemia in older adults is recognized as an important condition. NHLBI Small Business Program. Through the NHLBI Small Business Program , we ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... loss and lead to iron-deficiency anemia. Common causes of blood loss that lead to iron-deficiency anemia include: Bleeding in your GI tract, from an ulcer, colon cancer, or regular use of medicines such as aspirin ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... for iron-deficiency anemia. Lifestyle habits Certain lifestyle habits may increase your risk for iron-deficiency anemia, including: Vegetarian or vegan eating patterns. Not eating enough iron-rich foods, such as meat and fish, may result in ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... even with mild anemia. Now, anemia in older adults is recognized as an important condition. NHLBI Small Business Program. Through the NHLBI Small Business Program , we fund research and development for domestic small businesses that have strong potential ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... anemia. Return to Signs, Symptoms, and Complications to review signs and symptoms as well as complications from iron-deficiency ... NIH]) Heavy Menstrual Bleeding (Centers for Disease Control and ... Dietary Supplement Fact Sheet (NIH) Iron-Deficiency Anemia (National Library ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... be at risk for iron-deficiency anemia. Lifestyle habits Certain lifestyle habits may increase your risk for iron-deficiency anemia, ... you are experiencing side effects such as a bad metallic taste, vomiting, diarrhea, constipation, or upset stomach. ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... how we are using current research and advancing research to prevent iron-deficiency anemia. Participate in NHLBI Clinical Trials will explain our ongoing clinical studies that are investigating prevention strategies for iron-deficiency anemia. Signs, Symptoms, and Complications ...

Iron-Deficiency Anemia (For Parents)

Science.gov (United States)

... Videos for Educators Search English Español Iron-Deficiency Anemia KidsHealth / For Parents / Iron-Deficiency Anemia What's in ... common nutritional deficiency in children. About Iron-Deficiency Anemia Every red blood cell in the body contains ...

Anemia of Chronic Liver Diseases

Energy Technology Data Exchange (ETDEWEB)

Shin, Hyun Chung; Lee, Jhung Sang; Koh, Chang Soon; Lee, Mun Ho [Seoul National University College of Medicine, Seoul (Korea, Republic of)

1971-09-15

The pathogenetic mechanisms of anemia in patients with chronic liver disease were observed. Seventeen patients with moderate to advanced hepatic diseases were studied by various methods. Only patients without previous blood loss were included : 14 had cirrhosis, 2 had active chronic hepatitis, and one had inferior vena cava obstruction with associated liver cirrhosis. The followings were the results: 1. The anemia based on red blood cell count, Hb., and Ht. was found in 76.5-78.6% of the patients. 2. Red cell indices indicated that normo-macrocytic and normochromic anemia was present is the majority of the patients. 3. No evidence of megaloblastic anemia was found on the basis of the morphological examinations. 4. Serum iron, TIBC, % saturation and iron content in the bone marrow indicated that iron deficiency anemia was present in about half of the patients. 5. In the view of the erythrocyte dynamics, primary increase in the red cell destruction was ascribed to the cause of the anemia. 6. Decrease in the red cell survival time was not correlated with MCV, % saturation and S.L. ratio. Also, hemoglobin level was not correlated with MCV, % saturation and T{sub 50} Cr. Therefore, multiple causes may be involved in the pathogenesis of the anemia. 7. Anemia as determined by the red cell volume was found in only 60% of the patients. It may be possible that hemodilutional anemia is present.

Thermal applications of low-pressure diamond

International Nuclear Information System (INIS)

Haubner, R.; Lux, B.

1997-01-01

During the last decade several applications of low-pressure diamond were developed. Main products are diamond heat-spreaders using its high thermal conductivity, diamond windows with their high transparency over a wide range of wavelengths and wear resistant tool coatings because of diamonds superhardness. A short description of the most efficient diamond deposition methods (microwave, DC-glow discharge, plasma-jet and arc discharge) is given. The production and applications of diamond layers with high thermal conductivity will be described. Problems of reproducibility of diamond deposition, the influence of impurities, the heat conductivity in electronic packages, reliability and economical mass production will be discussed. (author)

Investigation of the physics of diamond MEMS : diamond allotrope lithography

International Nuclear Information System (INIS)

Zalizniak, I.; Olivero, P.; Jamieson, D.N.; Prawer, S.; Reichart, P.; Rubanov, S.; Petriconi, S.

2005-01-01

We propose a novel lithography process in which ion induced phase transfomations of diamond form sacrificial layers allowing the fabrication of small structures including micro-electromechanical systems (MEMS). We have applied this novel lithography to the fabrication of diamond microcavities, cantilevers and optical waveguides. In this paper we present preliminary experiments directed at the fabrication of suspended diamond disks that have the potential for operation as optical resonators. Such structures would be very durable and resistant to chemical attack with potential applications as novel sensors for extreme environments or high temperature radiation detectors. (author). 3 refs., 3 figs

Workshop on diamond and diamond-like-carbon films for the transportation industry

Energy Technology Data Exchange (ETDEWEB)

Nichols, F.A.; Moores, D.K. [eds.

1993-01-01

Applications exist in advanced transportation systems as well as in manufacturing processes that would benefit from superior tribological properties of diamond, diamond-like-carbon and cubic boron nitride coatings. Their superior hardness make them ideal candidates as protective coatings to reduce adhesive, abrasive and erosive wear in advanced diesel engines, gas turbines and spark-ignited engines and in machining and manufacturing tools as well. The high thermal conductivity of diamond also makes it desirable for thermal management not only in tribological applications but also in high-power electronic devices and possibly large braking systems. A workshop has been recently held at Argonne National Laboratory entitled ``Diamond and Diamond-Like-Carbon Films for Transportation Applications`` which was attended by 85 scientists and engineers including top people involved in the basic technology of these films and also representatives from many US industrial companies. A working group on applications endorsed 18 different applications for these films in the transportation area alone. Separate abstracts have been prepared.

Electrochemical applications of CVD diamond

International Nuclear Information System (INIS)

Pastor-Moreno, Gustavo

2002-01-01

Diamond technology has claimed an important role in industry since non-expensive methods of synthesis such as chemical vapour deposition allow to elaborate cheap polycrystalline diamond. This fact has increased the interest in the scientific community due to the outstanding properties of diamond. Since Pleskov published in 1987 the first paper in electrochemistry, many researchers around the world have studied different aspects of diamond electrochemistry such as reactivity, electrical structure, etc. As part of this worldwide interest these studies reveal new information about diamond electrodes. These studies report investigation of diamond electrodes characterized using structural techniques like scanning electrode microscopy and Raman spectroscopy. A new electrochemical theory based on surface states is presented that explains the metal and the semiconductor behaviour in terms of the doping level of the diamond electrode. In an effort to characterise the properties of diamond electrodes the band edges for hydrogen and oxygen terminated surface are located in organic solvent, hence avoiding possible interference that are present in aqueous solution. The determination of the band edges is performed by Mott-Schottky studies. These allow the calculation of the flat band potential and therefore the band edges. Additional cyclic voltammetric studies are presented for both types of surface termination. Mott-Schottky data and cyclic voltammograms are compared and explained in terms of the band edge localisation. Non-degenerately p-type semiconductor behaviour is presented for hydrogen terminated boron doped diamond. Graphitic surface states on oxidised surface boron doped diamond are responsible for the electrochemistry of redox couples that posses similar energy. Using the simple redox couple 1,4-benzoquinone effect of surface termination on the chemical behaviour of diamond is presented. Hydrogen sublayers in diamond electrodes seem to play an important role for the

Diamond-based materials for biomedical applications

CERN Document Server

Narayan, Roger

2013-01-01

Carbon is light-weight, strong, conductive and able to mimic natural materials within the body, making it ideal for many uses within biomedicine. Consequently a great deal of research and funding is being put into this interesting material with a view to increasing the variety of medical applications for which it is suitable. Diamond-based materials for biomedical applications presents readers with the fundamental principles and novel applications of this versatile material. Part one provides a clear introduction to diamond based materials for medical applications. Functionalization of diamond particles and surfaces is discussed, followed by biotribology and biological behaviour of nanocrystalline diamond coatings, and blood compatibility of diamond-like carbon coatings. Part two then goes on to review biomedical applications of diamond based materials, beginning with nanostructured diamond coatings for orthopaedic applications. Topics explored include ultrananocrystalline diamond for neural and ophthalmologi...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... if you are diagnosed with iron-deficiency anemia. Risk Factors You may have an increased risk for iron-deficiency anemia because of your age, ... or sex. Age You may be at increased risk for iron deficiency at certain ages: Infants between ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... Are you curious about how inflammation from chronic diseases can cause iron-deficiency anemia? Read more When there is ... DBDR) is a leader in research on the causes, prevention, and treatment of blood diseases, including iron-deficiency anemia. Search the NIH Research ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... iron-deficiency anemia early in life affects later behavior, thinking, and mood during adolescence. Treating anemia in premature or very small newborns . In collaboration with the Eunice Kennedy Shriver National Institute of Child Health and Human Development, we are investigating how ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... iron supplements work best to treat iron-deficiency anemia in children who do not consume the daily recommended amount ... and Clinical Studies to hear experts, parents, and children talk about their experiences with clinical ... Anemia Arrhythmia Blood Donation Blood Tests Blood ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... stores are developed during the third trimester of pregnancy. Children between ages 1 and 2, especially if they drink a lot ... Resources NHLBI resources Your Guide to Anemia [PDF, ... (National Institute of Diabetes and Digestive and Kidney Diseases) Avoiding Anemia (National ...

Severe Anemia in Malawian Children

NARCIS (Netherlands)

Calis, J.C.J.; Kamija, S.P.; Faragher, E.B.; Brabin, B.J.; Bates, I.; Cuevas, L.E.; Haan, de R.J.; Phiri, A.I.; Malange, P.; Khoka, M.; Hulshof, P.J.M.; Lieshout, L.; Beld, M.G.H.M.; Teo, Y.Y.; Rockett, K.A.; Richardson, A.; Kwiatkowski, D.P.; Molyneux, M.E.; Hensbroek, van M.B.

2008-01-01

Background Severe anemia is a major cause of sickness and death in African children, yet the causes of anemia in this population have been inadequately studied. Methods We conducted a case¿control study of 381 preschool children with severe anemia (hemoglobin concentration,

Homo-epitaxial diamond film growth on ion implanted diamond substrates

Energy Technology Data Exchange (ETDEWEB)

Weiser, P S; Prawer, S; Nugent, K W; Bettiol, A A; Kostidis, L I; Jamieson, D N [Melbourne Univ., Parkville, VIC (Australia). School of Physics

1997-12-31

The nucleation of CVD diamond is a complicated process, governed by many interrelated parameters. In the present work we attempt to elucidate the effect of strain on the growth of a homo-epitaxial CVD diamond. We have employed laterally confined high dose (MeV) Helium ion implantation to produce surface swelling of the substrate. The strain is enhanced by the lateral confinement of the implanted region to squares of 100 x 100 {mu}m{sup 2}. After ion implantation, micro-Raman spectroscopy was employed to map the surface strain. The substrates were then inserted into a CVD reactor and a CVD diamond film was grown upon them. Since the strained regions were laterally confined, it was then possible to monitor the effect of strain on diamond nucleation. The substrates were also analysed using Rutherford Backscattering Spectroscopy (RBS), Proton induced X-ray Emission (PIXE) and Ion Beam induced Luminescence (IBIL). 7 refs., 5 figs.

Homo-epitaxial diamond film growth on ion implanted diamond substrates

Energy Technology Data Exchange (ETDEWEB)

Weiser, P.S.; Prawer, S.; Nugent, K.W.; Bettiol, A.A.; Kostidis, L.I.; Jamieson, D.N. [Melbourne Univ., Parkville, VIC (Australia). School of Physics

1996-12-31

The nucleation of CVD diamond is a complicated process, governed by many interrelated parameters. In the present work we attempt to elucidate the effect of strain on the growth of a homo-epitaxial CVD diamond. We have employed laterally confined high dose (MeV) Helium ion implantation to produce surface swelling of the substrate. The strain is enhanced by the lateral confinement of the implanted region to squares of 100 x 100 {mu}m{sup 2}. After ion implantation, micro-Raman spectroscopy was employed to map the surface strain. The substrates were then inserted into a CVD reactor and a CVD diamond film was grown upon them. Since the strained regions were laterally confined, it was then possible to monitor the effect of strain on diamond nucleation. The substrates were also analysed using Rutherford Backscattering Spectroscopy (RBS), Proton induced X-ray Emission (PIXE) and Ion Beam induced Luminescence (IBIL). 7 refs., 5 figs.

Homo-epitaxial diamond film growth on ion implanted diamond substrates

International Nuclear Information System (INIS)

Weiser, P.S.; Prawer, S.; Nugent, K.W.; Bettiol, A.A.; Kostidis, L.I.; Jamieson, D.N.

1996-01-01

The nucleation of CVD diamond is a complicated process, governed by many interrelated parameters. In the present work we attempt to elucidate the effect of strain on the growth of a homo-epitaxial CVD diamond. We have employed laterally confined high dose (MeV) Helium ion implantation to produce surface swelling of the substrate. The strain is enhanced by the lateral confinement of the implanted region to squares of 100 x 100 μm 2 . After ion implantation, micro-Raman spectroscopy was employed to map the surface strain. The substrates were then inserted into a CVD reactor and a CVD diamond film was grown upon them. Since the strained regions were laterally confined, it was then possible to monitor the effect of strain on diamond nucleation. The substrates were also analysed using Rutherford Backscattering Spectroscopy (RBS), Proton induced X-ray Emission (PIXE) and Ion Beam induced Luminescence (IBIL). 7 refs., 5 figs

Anemia in the general population

DEFF Research Database (Denmark)

Martinsson, Andreas; Andersson, Charlotte; Andell, Pontus

2014-01-01

predictor of mortality, with the highest mortality observed for macrocytic anemia, which was less prevalent than microcytic and normocytic anemia. Dietary intake of iron and vitamin B12 were significantly lower and use of antithrombotic medications was significantly higher in subjects with anemia. The World...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... how having iron-deficiency anemia early in life affects later behavior, thinking, and mood during adolescence. Treating anemia in premature or very small newborns . In collaboration with the Eunice Kennedy Shriver National Institute of Child Health and Human Development, we are investigating how ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... anemia, including: Vegetarian or vegan eating patterns. Not eating enough iron-rich foods, such as meat and fish, may result in ... deficiency anemia, your doctor may recommend heart-healthy eating and choosing iron-rich foods, especially during certain stages of life when more ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... iron-deficiency anemia early in life affects later behavior, thinking, and mood during adolescence. Treating anemia in premature or very small newborns . In collaboration with the Eunice Kennedy Shriver National Institute of Child Health and Human Development, we are investigating how best to treat ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... over 65 years of age had low hemoglobin levels. This was associated with a greater risk of death even with mild anemia. Now, anemia in older adults is recognized as an important condition. NHLBI Small Business Program. Through the NHLBI Small Business Program , we ...

Phosphorylated nano-diamond/ Polyimide Nanocomposites

International Nuclear Information System (INIS)

Beyler-Çiǧil, Asli; Çakmakçi, Emrah; Kahraman, Memet Vezir

2014-01-01

In this study, a novel route to synthesize polyimide (PI)/phosphorylated nanodiamond films with improved thermal and mechanical properties was developed. Surface phosphorylation of nano-diamond was performed in dichloromethane. Phosphorylation dramatically enhanced the thermal stability of nano-diamond. Poly(amic acid) (PAA), which is the precursor of PI, was successfully synthesized with 3,3',4,4'-Benzophenonetetracarboxylic dianhydride (BTDA) and 4,4'-oxydianiline (4,4'-ODA) in the solution of N,N- dimethylformamide (DMF). Pure BTDA-ODA polyimide films and phosphorylated nanodiamond containing BTDA-ODA PI films were prepared. The PAA displayed good compatibility with phosphorylated nano-diamond. The morphology of the polyimide (PI)/phosphorylated nano-diamond was characterized by scanning electron microscopy (SEM). Chemical structure of polyimide and polyimide (PI)/phosphorylated nano-diamond was characterized by FTIR. SEM and FTIR results showed that the phosphorylated nano-diamond was successfully prepared. Thermal properties of the polyimide (PI)/phosphorylated nanodiamond was characterized by thermogravimetric analysis (TGA). TGA results showed that the thermal stability of (PI)/phosphorylated nano-diamond film was increased

Nanocrystalline diamond coatings for machining

Energy Technology Data Exchange (ETDEWEB)

Frank, M.; Breidt, D.; Cremer, R. [CemeCon AG, Wuerselen (Germany)

2007-07-01

This history of CVD diamond synthesis goes back to the fifties of the last century. However, the scientific and economical potential was only gradually recognized. In the eighties, intensive worldwide research on CVD diamond synthesis and applications was launched. Industrial products, especially diamond-coated cutting tools, were introduced to the market in the middle of the nineties. This article shows the latest developments in this area, which comprises nanocrystalline diamond coating structures. (orig.)

Diamond: a material for acoustic devices

OpenAIRE

MORTET, Vincent; WILLIAMS, Oliver; HAENEN, Ken

2008-01-01

Diamond has been foreseen to replace silicon for high power, high frequency electronic applications or for devices that operates in harsh environments. However, diamond electronic devices are still in the laboratory stage due to the lack of large substrates and the complexity of diamond doping. On another hand, surface acoustic wave filters based on diamond are commercially available. Diamond is especially suited for acoustic applications because of its exceptional mechanical properties. The ...

Anemia: An approach to evaluation, 2014

Directory of Open Access Journals (Sweden)

Philip Kuriakose

2015-01-01

Full Text Available Anemia is very commonly encountered in general clinical practice among all age groups. The more commonly used way to classify anemia has been to categorize it as being microcytic (mean corpuscular volume [MCV] 100 fL, which in turn allows for a more practical way to attempt to come up with a cause for any decrease in hemoglobin. Microcytic anemias are usually due to iron deficiency (in turn, a result of a number of different etiologies ranging from decreased intake, malabsorption, or blood loss, hemoglobinopathies (thalassemic syndromes, and some cases of severe anemia resulting from chronic disease. Normocytic anemia is often a result of anemia of chronic disease, hemolysis, or secondary to bone marrow failure. Macrocytic anemias are frequently caused by deficiencies of folic acid and/or Vitamin B12, exposure to toxic agents like drugs that interfere with DNA metabolism and alcohol, as also bone marrow failure states, such as from myelodysplastic syndrome. A comprehensive history, physical examination, and directed laboratory evaluation will help to identify a specific cause for anemia.

Severe anemia in Malawian children

NARCIS (Netherlands)

Calis, Job C. J.; Phiri, Kamija S.; Faragher, E. Brian; Brabin, Bernard J.; Bates, Imelda; Cuevas, Luis E.; de Haan, Rob J.; Phiri, Ajib I.; Malange, Pelani; Khoka, Mirriam; Hulshof, Paul J. M.; van Lieshout, Lisette; Beld, Marcel G. H. M.; teo, Yik Y.; Rockett, Kirk A.; Richardson, Anna; Kwiatkowski, Dominic P.; Molyneux, Malcolm E.; Boele van Hensbroek, Michael

2008-01-01

Background Severe anemia is a major cause of sickness and death in African children, yet the causes of anemia in this population have been inadequately studied. Methods We conducted a case-control study of 381 preschool children with severe anemia (hemoglobin concentration, <5.0 g per deciliter) and

Severe anemia in Malawian children

NARCIS (Netherlands)

Calis, Job Cj; Phiri, Kamija S.; Faragher, E. Brian; Brabin, Bernard J.; Bates, Imelda; Cuevas, Luis E.; de Haan, Rob J.; Phiri, Ajib I.; Malange, Pelani; Khoka, Mirriam; Hulshof, Paul Jm; van Lieshout, Lisette; Beld, Marcel Ghm; teo, Yik Y.; Rockett, Kirk A.; Richardson, Anna; Kwiatkowski, Dominic P.; Molyneux, Malcolm E.; van Hensbroek, Michaël Boele

2016-01-01

Severe anemia is a major cause of sickness and death in African children, yet the causes of anemia in this population have been inadequately studied. We conducted a case-control study of 381 preschool children with severe anemia (hemoglobin concentration, <5.0 g per deciliter) and 757 preschool

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... also are hoping to determine which iron supplements work best to treat iron-deficiency anemia in children who do not consume the daily recommended amount of iron. Read less Participate in NHLBI Clinical Trials We lead or sponsor many studies related to iron-deficiency anemia. See if you ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... Precision Medicine Activities Obesity, Nutrition, and Physical Activity Population and Epidemiology Studies Women’s Health All Science A- ... to help your body absorb iron. Avoid drinking black tea, which reduces iron ... was associated with a greater risk of death even with mild anemia. Now, anemia in older ...

Ion implantation into diamond

International Nuclear Information System (INIS)

Sato, Susumu

1994-01-01

The graphitization and the change to amorphous state of diamond surface layer by ion implantation and its characteristics are reported. In the diamond surface, into which more than 10 16 ions/cm 2 was implanted, the diamond crystals are broken, and the structure changes to other carbon structure such as amorphous state or graphite. Accompanying this change of structure, the electric conductivity of the implanted layer shows two discontinuous values due to high resistance and low resistance. This control of structure can be done by the temperature of the base during the ion implantation into diamond. Also it is referred to that by the base temperature during implantation, the mutual change of the structure between amorphous state and graphite can be controlled. The change of the electric resistance and the optical characteristics by the ion implantation into diamond surface, the structural analysis by Raman spectroscopy, and the control of the structure of the implanted layer by the base temperature during implantation are reported. (K.I.)

Investing in Diamonds

NARCIS (Netherlands)

Renneboog, Luc

2015-01-01

This paper examines the risk-return characteristics of investment grade gems (white diamonds, colored diamonds and other types of gems including sapphires, rubies, and emeralds). The transactions are coming from gem auctions and span the period 1999-2012. Over our time frame, the annual nominal USD

Diamond Pixel Detectors

International Nuclear Information System (INIS)

Adam, W.; Berdermann, E.; Bergonzo, P.; Bertuccio, G.; Bogani, F.; Borchi, E.; Brambilla, A.; Bruzzi, M.; Colledani, C.; Conway, J.; D'Angelo, P.; Dabrowski, W.; Delpierre, P.; Deneuville, A.; Doroshenko, J.; Dulinski, W.; Eijk, B. van; Fallou, A.; Fizzotti, F.; Foster, J.; Foulon, F.; Friedl, M.; Gan, K.K.; Gheeraert, E.; Gobbi, B.; Grim, G.P.; Hallewell, G.; Han, S.; Hartjes, F.; Hrubec, J.; Husson, D.; Kagan, H.; Kania, D.; Kaplon, J.; Kass, R.; Koeth, T.; Krammer, M.; Lander, R.; Logiudice, A.; Lu, R.; Lynne, L.M.; Manfredotti, C.; Meier, D.; Mishina, M.; Moroni, L.; Oh, A.; Pan, L.S.; Pernicka, M.; Perera, L.; Pirollo, S.; Plano, R.; Procario, M.; Riester, J.L.; Roe, S.; Rott, C.; Rousseau, L.; Rudge, A.; Russ, J.; Sala, S.; Sampietro, M.; Schnetzer, S.; Sciortino, S.; Stelzer, H.; Stone, R.; Suter, B.; Tapper, R.J.; Tesarek, R.; Trischuk, W.; Tromson, D.; Vittone, E.; Wedenig, R.; Weilhammer, P.; White, C.; Zeuner, W.; Zoeller, M.

2001-01-01

Diamond based pixel detectors are a promising radiation-hard technology for use at the LHC. We present first results on a CMS diamond pixel sensor. With a threshold setting of 2000 electrons, an average pixel efficiency of 78% was obtained for normally incident minimum ionizing particles

Diamond Pixel Detectors

Energy Technology Data Exchange (ETDEWEB)

Adam, W.; Berdermann, E.; Bergonzo, P.; Bertuccio, G.; Bogani, F.; Borchi, E.; Brambilla, A.; Bruzzi, M.; Colledani, C.; Conway, J.; D' Angelo, P.; Dabrowski, W.; Delpierre, P.; Deneuville, A.; Doroshenko, J.; Dulinski, W.; Eijk, B. van; Fallou, A.; Fizzotti, F.; Foster, J.; Foulon, F.; Friedl, M.; Gan, K.K.; Gheeraert, E.; Gobbi, B.; Grim, G.P.; Hallewell, G.; Han, S.; Hartjes, F.; Hrubec, J.; Husson, D.; Kagan, H.; Kania, D.; Kaplon, J.; Kass, R.; Koeth, T.; Krammer, M.; Lander, R.; Logiudice, A.; Lu, R.; Lynne, L.M.; Manfredotti, C.; Meier, D.; Mishina, M.; Moroni, L.; Oh, A.; Pan, L.S.; Pernicka, M.; Perera, L. E-mail: perera@physics.rutgers.edu; Pirollo, S.; Plano, R.; Procario, M.; Riester, J.L.; Roe, S.; Rott, C.; Rousseau, L.; Rudge, A.; Russ, J.; Sala, S.; Sampietro, M.; Schnetzer, S.; Sciortino, S.; Stelzer, H.; Stone, R.; Suter, B.; Tapper, R.J.; Tesarek, R.; Trischuk, W.; Tromson, D.; Vittone, E.; Wedenig, R.; Weilhammer, P.; White, C.; Zeuner, W.; Zoeller, M

2001-06-01

Diamond based pixel detectors are a promising radiation-hard technology for use at the LHC. We present first results on a CMS diamond pixel sensor. With a threshold setting of 2000 electrons, an average pixel efficiency of 78% was obtained for normally incident minimum ionizing particles.

Quantum photonic networks in diamond

KAUST Repository

Lončar, Marko

2013-02-01

Advances in nanotechnology have enabled the opportunity to fabricate nanoscale optical devices and chip-scale systems in diamond that can generate, manipulate, and store optical signals at the single-photon level. In particular, nanophotonics has emerged as a powerful interface between optical elements such as optical fibers and lenses, and solid-state quantum objects such as luminescent color centers in diamond that can be used effectively to manipulate quantum information. While quantum science and technology has been the main driving force behind recent interest in diamond nanophotonics, such a platform would have many applications that go well beyond the quantum realm. For example, diamond\\'s transparency over a wide wavelength range, large third-order nonlinearity, and excellent thermal properties are of great interest for the implementation of frequency combs and integrated Raman lasers. Diamond is also an inert material that makes it well suited for biological applications and for devices that must operate in harsh environments. Copyright © Materials Research Society 2013.

Severe anemia in Malawian children.

Science.gov (United States)

Calis, Job Cj; Phiri, Kamija S; Faragher, E Brian; Brabin, Bernard J; Bates, Imelda; Cuevas, Luis E; de Haan, Rob J; Phiri, Ajib I; Malange, Pelani; Khoka, Mirriam; Hulshof, Paul Jm; van Lieshout, Lisette; Beld, Marcel Ghm; Teo, Yik Y; Rockett, Kirk A; Richardson, Anna; Kwiatkowski, Dominic P; Molyneux, Malcolm E; van Hensbroek, Michaël Boele

2016-09-01

Severe anemia is a major cause of sickness and death in African children, yet the causes of anemia in this population have been inadequately studied. We conducted a case-control study of 381 preschool children with severe anemia (hemoglobin concentration, <5.0 g per deciliter) and 757 preschool children without severe anemia in urban and rural settings in Malawi. Causal factors previously associated with severe anemia were studied. The data were examined by multivariate analysis and structural equation modeling. Bacteremia (adjusted odds ratio, 5.3; 95% confidence interval [CI], 2.6 to 10.9), malaria (adjusted odds ratio, 2.3; 95% CI, 1.6 to 3.3), hookworm (adjusted odds ratio, 4.8; 95% CI, 2.0 to 11.8), human immunodeficiency virus infection (adjusted odds ratio, 2.0; 95% CI, 1.0 to 3.8), the G6PD -202/-376 genetic disorder (adjusted odds ratio, 2.4; 95% CI, 1.3 to 4.4), vitamin A deficiency (adjusted odds ratio, 2.8; 95% CI, 1.3 to 5.8), and vitamin B 12 deficiency (adjusted odds ratio, 2.2; 95% CI, 1.4 to 3.6) were associated with severe anemia. Folate deficiency, sickle cell disease, and laboratory signs of an abnormal inflammatory response were uncommon. Iron deficiency was not prevalent in case patients (adjusted odds ratio, 0.37; 95% CI, 0.22 to 0.60) and was negatively associated with bacteremia. Malaria was associated with severe anemia in the urban site (with seasonal transmission) but not in the rural site (where malaria was holoendemic). Seventy-six percent of hookworm infections were found in children under 2 years of age. There are multiple causes of severe anemia in Malawian preschool children, but folate and iron deficiencies are not prominent among them. Even in the presence of malaria parasites, additional or alternative causes of severe anemia should be considered.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... grams per deciliter (g/dl) for men and less than 12 g/dl for women is diagnostic of anemia. In iron-deficiency anemia, ... blood levels of iron will be low, or less than 10 micromoles per liter (mmol/L) for both men and women. Normal levels are 10 to 30 mmol/L. ...

Anemia in the Newborn

Science.gov (United States)

... Overview of Horseshoe Kidney Additional Content Medical News Anemia in the Newborn By Andrew W. Walter, MS ... for the Professional Version Blood Problems in Newborns Anemia in the Newborn Hemolytic Disease of the Newborn ...

Tracing the depositional history of Kalimantan diamonds by zircon provenance and diamond morphology studies

Science.gov (United States)

Kueter, Nico; Soesilo, Joko; Fedortchouk, Yana; Nestola, Fabrizio; Belluco, Lorenzo; Troch, Juliana; Wälle, Markus; Guillong, Marcel; Von Quadt, Albrecht; Driesner, Thomas

2016-11-01

Diamonds in alluvial deposits in Southeast Asia are not accompanied by indicator minerals suggesting primary kimberlite or lamproite sources. The Meratus Mountains in Southeast Borneo (Province Kalimantan Selatan, Indonesia) provide the largest known deposit of these so-called "headless" diamond deposits. Proposals for the origin of Kalimantan diamonds include the adjacent Meratus ophiolite complex, ultra-high pressure (UHP) metamorphic terranes, obducted subcontinental lithospheric mantle and undiscovered kimberlite-type sources. Here we report results from detailed sediment provenance analysis of diamond-bearing Quaternary river channel material and from representative outcrops of the oldest known formations within the Alino Group, including the diamond-bearing Campanian-Maastrichtian Manunggul Formation. Optical examination of surfaces of diamonds collected from artisanal miners in the Meratus area (247 stones) and in West Borneo (Sanggau Area, Province Kalimantan Barat; 85 stones) points toward a classical kimberlite-type source for the majority of these diamonds. Some of the diamonds host mineral inclusions suitable for deep single-crystal X-ray diffraction investigation. We determined the depth of formation of two olivines, one coesite and one peridotitic garnet inclusion. Pressure of formation estimates for the peridotitic garnet at independently derived temperatures of 930-1250 °C are between 4.8 and 6.0 GPa. Sediment provenance analysis includes petrography coupled to analyses of detrital garnet and glaucophane. The compositions of these key minerals do not indicate kimberlite-derived material. By analyzing almost 1400 zircons for trace element concentrations with laser ablation ICP-MS (LA-ICP-MS) we tested the mineral's potential as an alternative kimberlite indicator. The screening ultimately resulted in a small subset of ten zircons with a kimberlitic affinity. Subsequent U-Pb dating resulting in Cretaceous ages plus a detailed chemical reflection make

The Many Facets of Diamond Crystals

Directory of Open Access Journals (Sweden)

Yuri N. Palyanov

2018-01-01

Full Text Available This special issue is intended to serve as a multidisciplinary forum covering broad aspects of the science, technology, and application of synthetic and natural diamonds. This special issue contains 12 papers, which highlight recent investigations and developments in diamond research related to the diverse problems of natural diamond genesis, diamond synthesis and growth using CVD and HPHT techniques, and the use of diamond in both traditional applications, such as mechanical machining of materials, and the new recently emerged areas, such as quantum technologies. The results presented in the contributions collected in this special issue clearly demonstrate that diamond occupies a very special place in modern science and technology. After decades of research, this structurally very simple material still poses many intriguing scientific questions and technological challenges. It seems undoubted that diamond will remain the center of attraction for many researchers for many years to come.

76 FR 37684 - Airworthiness Directives; Diamond Aircraft Industries GmbH Model (Diamond) DA 40 Airplanes...

Science.gov (United States)

2011-06-28

... Industries GmbH Model (Diamond) DA 40 Airplanes Equipped With Certain Cabin Air Conditioning Systems AGENCY... inspections of the Diamond Model DA 40 airplanes equipped with a VCS installed per Premier Aircraft Service... GmbH Model (Diamond) DA 40 Airplanes Equipped With Certain Cabin Air Conditioning Systems: Docket No...

One step deposition of highly adhesive diamond films on cemented carbide substrates via diamond/β-SiC composite interlayers

Energy Technology Data Exchange (ETDEWEB)

Wang, Tao; Zhuang, Hao; Jiang, Xin, E-mail: xin.jiang@uni-siegen.de

2015-12-30

Graphical abstract: - Highlights: • Novel diamond/beta-silicon carbide composite gradient interlayers were synthesized. • The interlayer features a cross-sectional gradient with increasing diamond content. • Diamond top layers and the interlayers were deposited in one single process. • The adhesion of the diamond film is drastically improved by employing the interlayer. • The stress was suppressed by manipulating the distribution of diamond and silicon carbide. - Abstract: Deposition of adherent diamond films on cobalt-cemented tungsten carbide substrates has been realized by application of diamond/beta-silicon carbide composite interlayers. Diamond top layers and the interlayers were deposited in one single process by hot filament chemical vapor deposition technique. Two different kinds of interlayers have been employed, namely, gradient interlayer and interlayer with constant composition. The distribution of diamond and beta-silicon carbide phases was precisely controlled by manipulating the gas phase composition. X-ray diffraction and Raman spectroscopy were employed to determine the existence of diamond, beta-silicon carbide and cobalt silicides (Co{sub 2}Si, CoSi) phases, as well as the quality of diamond crystal and the residual stress in the films. Rockwell-C indentation tests were carried out to evaluate the film adhesion. It is revealed that the adhesion of the diamond film is drastically improved by employing the interlayer. This is mainly influenced by the residual stress in the diamond top layer, which is induced by the different thermal expansion coefficient of the film and the substrate. It is even possible to further suppress the stress by manipulating the distribution of diamond and beta-silicon carbide in the interlayer. The most adhesive diamond film on cemented carbide is thus obtained by employing a gradient composite interlayer.

A wear simulation study of nanostructured CVD diamond-on-diamond articulation involving concave/convex mating surfaces

Science.gov (United States)

Baker, Paul A.; Thompson, Raymond G.; Catledge, Shane A.

2015-01-01

Using microwave-plasma Chemical Vapor Deposition (CVD), a 3-micron thick nanostructured-diamond (NSD) layer was deposited onto polished, convex and concave components that were machined from Ti-6Al-4V alloy. These components had the same radius of curvature, 25.4mm. Wear testing of the surfaces was performed by rotating articulation of the diamond-deposited surfaces (diamond-on-diamond) with a load of 225N for a total of 5 million cycles in bovine serum resulting in polishing of the diamond surface and formation of very shallow, linear wear grooves of less than 50nm depth. The two diamond surfaces remained adhered to the components and polished each other to an average surface roughness that was reduced by as much as a factor of 80 for the most polished region located at the center of the condyle. Imaging of the surfaces showed that the initial wearing-in phase of diamond was only beginning at the end of the 5 million cycles. Atomic force microscopy, scanning electron microscopy, Raman spectroscopy, and surface profilometry were used to characterize the surfaces and verify that the diamond remained intact and uniform over the surface, thereby protecting the underlying metal. These wear simulation results show that diamond deposition on Ti alloy has potential application for joint replacement devices with improved longevity over existing devices made of cobalt chrome and ultra-high molecular weight polyethylene (UHMWPE). PMID:26989457

Diamond and diamond-like films for transportation applications

Energy Technology Data Exchange (ETDEWEB)

Perez, J.M.

1993-01-01

This section is a compilation of transparency templates which describe the goals of the Office of Transportation Materials (OTM) Tribology Program. The positions of personnel on the OTM are listed. The role and mission of the OTM is reviewed. The purpose of the Tribology Program is stated to be `to obtain industry input on program(s) in tribology/advanced lubricants areas of interest`. The objective addressed here is to identify opportunities for cost effective application of diamond and diamond-like carbon in transportation systems.

Anemia of Inflammation and Chronic Disease

Science.gov (United States)

... AI/ACD. AI/ACD is easily confused with iron- deficiency anemia because in both forms of anemia levels of ... cell production. Low blood iron levels occur in iron-deficiency anemia because levels of the iron stored in the ...

CVD diamond substrates for electronic devices

International Nuclear Information System (INIS)

Holzer, H.

1996-03-01

In this study the applicability of chemical vapor deposition (CVD) diamond as a material for heat spreaders was investigated. Economical evaluations on the production of heat spreaders were also performed. For the diamond synthesis the hot-filament and microwave method were used respectively. The deposition parameters were varied in a way that free standing diamond layers with a thickness of 80 to 750 microns and different qualities were obtained. The influence of the deposition parameters on the relevant film properties was investigated and discussed. With both the hot-filament and microwave method it was possible to deposit diamond layers having a thermal conductivity exceeding 1200 W/mK and therefore to reach the quality level for commercial uses. The electrical resistivity was greater than 10 12 Ωcm. The investigation of the optical properties was done by Raman-, IR- and cathodoluminescence spectroscopy. Because of future applications of diamond-aluminium nitride composites as highly efficient heat spreaders diamond deposition an AIN was investigated. An improved substrate pretreatment prior to diamond deposition showed promising results for better performance of such composite heat spreaders. Both free standing layers and diamond-AIN composites could be cut by a CO2 Laser in Order to get an exact size geometry. A reduction of the diamond surface roughness was achieved by etching with manganese powder or cerium. (author)

Predictors of anemia in women of reproductive age: Biomarkers Reflecting Inflammation and Nutritional Determinants of Anemia (BRINDA) project.

Science.gov (United States)

Wirth, James P; Woodruff, Bradley A; Engle-Stone, Reina; Namaste, Sorrel Ml; Temple, Victor J; Petry, Nicolai; Macdonald, Barbara; Suchdev, Parminder S; Rohner, Fabian; Aaron, Grant J

2017-07-01

Background: Anemia in women of reproductive age (WRA) (age range: 15-49 y) remains a public health problem globally, and reducing anemia in women by 50% by 2025 is a goal of the World Health Assembly. Objective: We assessed the associations between anemia and multiple proximal risk factors (e.g., iron and vitamin A deficiencies, inflammation, malaria, and body mass index) and distal risk factors (e.g., education status, household sanitation and hygiene, and urban or rural residence) in nonpregnant WRA. Design: Cross-sectional, nationally representative data from 10 surveys ( n = 27,018) from the Biomarkers Reflecting Inflammation and Nutritional Determinants of Anemia (BRINDA) project were analyzed individually and pooled by the infection burden and risk in the country. We examined the severity of anemia and measured the bivariate associations between anemia and factors at the country level and by infection burden, which we classified with the use of the national prevalences of malaria, HIV, schistosomiasis, sanitation, and water-quality indicators. Pooled multivariate logistic regression models were constructed for each infection-burden category to identify independent determinants of anemia (hemoglobin concertation <120 g/L). Results: Anemia prevalence was ∼40% in countries with a high infection burden and 12% and 7% in countries with moderate and low infection burdens, respectively. Iron deficiency was consistently associated with anemia in multivariate models, but the proportion of anemic women who were iron deficient was considerably lower in the high-infection group (35%) than in the moderate- and low-infection groups (65% and 71%, respectively). In the multivariate analysis, inflammation, vitamin A insufficiency, socioeconomic status, and age were also significantly associated with anemia, but malaria and vitamin B-12 and folate deficiencies were not. Conclusions: The contribution of iron deficiency to anemia varies according to a country's infection

Predictors of anemia in women of reproductive age: Biomarkers Reflecting Inflammation and Nutritional Determinants of Anemia (BRINDA) project

Science.gov (United States)

Woodruff, Bradley A; Petry, Nicolai; Macdonald, Barbara; Aaron, Grant J

2017-01-01

Background: Anemia in women of reproductive age (WRA) (age range: 15–49 y) remains a public health problem globally, and reducing anemia in women by 50% by 2025 is a goal of the World Health Assembly. Objective: We assessed the associations between anemia and multiple proximal risk factors (e.g., iron and vitamin A deficiencies, inflammation, malaria, and body mass index) and distal risk factors (e.g., education status, household sanitation and hygiene, and urban or rural residence) in nonpregnant WRA. Design: Cross-sectional, nationally representative data from 10 surveys (n = 27,018) from the Biomarkers Reflecting Inflammation and Nutritional Determinants of Anemia (BRINDA) project were analyzed individually and pooled by the infection burden and risk in the country. We examined the severity of anemia and measured the bivariate associations between anemia and factors at the country level and by infection burden, which we classified with the use of the national prevalences of malaria, HIV, schistosomiasis, sanitation, and water-quality indicators. Pooled multivariate logistic regression models were constructed for each infection-burden category to identify independent determinants of anemia (hemoglobin concertation Anemia prevalence was ∼40% in countries with a high infection burden and 12% and 7% in countries with moderate and low infection burdens, respectively. Iron deficiency was consistently associated with anemia in multivariate models, but the proportion of anemic women who were iron deficient was considerably lower in the high-infection group (35%) than in the moderate- and low-infection groups (65% and 71%, respectively). In the multivariate analysis, inflammation, vitamin A insufficiency, socioeconomic status, and age were also significantly associated with anemia, but malaria and vitamin B-12 and folate deficiencies were not. Conclusions: The contribution of iron deficiency to anemia varies according to a country’s infection burden. Anemia

Medical applications of diamond particles & surfaces

OpenAIRE

Roger J Narayan; Ryan D. Boehm; Anirudha V. Sumant

2011-01-01

Diamond has been considered for use in several medical applications due to its unique mechanical, chemical, optical, and biological properties. In this paper, methods for preparing synthetic diamond surfaces and particles are described. In addition, recent developments involving the use of diamond in prostheses, sensing, imaging, and drug delivery applications are reviewed. These developments suggest that diamond-containing structures will provide significant improvements in the diagnosis and...

Diamond Sensors for Energy Frontier Experiments

CERN Document Server

Schnetzer, Steve

2014-01-01

We discuss the use of diamond sensors in high-energy, high-i ntensity collider experiments. Re- sults from diamond sensor based beam conditions monitors in the ATLAS and CMS experiments at the CERN Large Hadron Collider (LHC) are presented and pla ns for diamond based luminosity monitors for the upcoming LHC run are described. We describe recent measurements on single crystal diamond sensors that indicate a polarization effec t that causes a reduction of charge col- lection efficiency as a function of particle flux. We conclude by describing new developments on the promising technology of 3D diamond sensors.

APLASTIC ANEMIA

Directory of Open Access Journals (Sweden)

Ni Made Dharma Laksmi

2013-07-01

Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Aplastic Anemia describes a disorder of the clinical syndrome is marked by a deficiency of red blood cells, neutrophils, monocytes and platelets in the absence of other forms of bone marrow damage. Aplastic anemia is classified as a rare disease in developed countries the incidence of 3-6 cases / 1 million inhabitants / year. The exact cause of someone suffering from aplastic anemia also can not be established with certainty, but there are several sources of potential risk factors. Prognosis or course of the disease varies widely aplastic anemia, but without treatment generally gives a poor prognosis /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Diamond network: template-free fabrication and properties.

Science.gov (United States)

Zhuang, Hao; Yang, Nianjun; Fu, Haiyuan; Zhang, Lei; Wang, Chun; Huang, Nan; Jiang, Xin

2015-03-11

A porous diamond network with three-dimensionally interconnected pores is of technical importance but difficult to be produced. In this contribution, we demonstrate a simple, controllable, and "template-free" approach to fabricate diamond networks. It combines the deposition of diamond/β-SiC nanocomposite film with a wet-chemical selective etching of the β-SiC phase. The porosity of these networks was tuned from 15 to 68%, determined by the ratio of the β-SiC phase in the composite films. The electrochemical working potential and the reactivity of redox probes on the diamond networks are similar to those of a flat nanocrystalline diamond film, while their surface areas are hundreds of times larger than that of a flat diamond film (e.g., 490-fold enhancement for a 3 μm thick diamond network). The marriage of the unprecedented physical/chemical features of diamond with inherent advantages of the porous structure makes the diamond network a potential candidate for various applications such as water treatment, energy conversion (batteries or fuel cells), and storage (capacitors), as well as electrochemical and biochemical sensing.

Undoped CVD diamond films for electrochemical applications

International Nuclear Information System (INIS)

Mosinska, Lidia; Fabisiak, Kazimierz; Paprocki, Kazimierz; Kowalska, Magdalena; Popielarski, Pawel; Szybowicz, Miroslaw

2013-01-01

By using different deposition conditions, the CVD diamond films with different qualities and orientation were grown by the hot-filament CVD technique. The object of this article is to summarize and discuss relation between structural, physical and electrochemical properties of different diamond electrodes. The physical properties of the Hot Filament CVD microcrystalline diamond films are analyzed by scanning electron microscopy and Raman spectroscopy. In presented studies two different electrodes were used of the diamond grain sizes around 200 nm and 10 μm, as it was estimated from SEM picture. The diamond layers quality was checked on basis of FWHM (Full width at Half Maximum) of 1332 cm −1 diamond Raman peak. The ratio of sp 3 /sp 2 carbon bonds was determined by 1550 cm −1 G band and 1350 cm −1 D band in the Raman spectrum. The electrochemical properties were analyzed using (CV) cyclic voltammetry measurements in aqueous solutions. The sensitivity of undoped diamond electrodes depends strongly on diamond film quality and concentration of amorphous carbon phase in the diamond layer

Fanconi Anemia — Case Report of Rare Aplastic Anemia at Child

Directory of Open Access Journals (Sweden)

Deaconu Alina

2014-06-01

Full Text Available Introduction: Fanconi anemia is an autosomal recessive disease characterized by congenital abnormalities, defective haematopoiesis, and a high risk of developing acute myeloid leukaemia, myelodysplastic syndrome and cancers. FA was first described in 1927 by the Swiss pediatrician Guido Fanconi. The diagnosis is based on morphological abnormalities, hematologic abnormalities (pancytopenia, macrocytic anemia and progressive bone marrow failure and genetic tests (cariograma.

Thin diamond films for tribological applications

International Nuclear Information System (INIS)

Wong, M.S.; Meilunas, R.; Ong, T.P.; Chang, R.P.H.

1989-01-01

Diamond films have been deposited on Si, Mo and many other substrates by microwave and radio frequency plasma enhanced chemical vapor deposition. Although the adhesion between the diamond film and most of the metal substrates is poor due to residual thermal stress from the mismatch of thermal expansion coefficients, the authors have developed processes to promote the growth of uniform and continuous diamond films with enhanced adhesion to metal substrates for tribological applications. The tribological properties of these films are measured using a ring-on-block tribotester. The coefficients of friction of diamond films sliding against a 52100 steel ring under the same experimental conditions are found to be significantly different depending on the morphology, grain size and roughness of the diamond films. However, under all cases tested, it is found that for uniform and continuous diamond films with small grain size of 1-3 micrometers, the coefficient of friction of the diamond film sliding against a steel ring under lubrication of a jet of mineral oil is about 0.04

Genetic diagnosis for congenital hemolytic anemia.

Science.gov (United States)

Ohga, Shouichi

2016-01-01

Congenital hemolytic anemia is a group of monogenic diseases presenting with anemia due to increased destruction of circulating erythrocytes. The etiology of inherited anemia accounts for germline mutations of the responsible genes coding for the structural components of erythrocytes and extra-erythrocytes. The erythrocyte abnormalities are classified into three major disorders of red cell membrane defects, hemoglobinopathies, and red cell enzymopathies. The extra-erythrocyte abnormalities, typified by consumption coagulopathy and intravascular hemolysis, include Upshaw-Schulman syndrome and atypical hemolytic uremic syndrome. The clinical manifestations of congenital hemolytic anemia are anemia, jaundice, cholelithiasis and splenomegaly, while the onset mode and severity are both variable. Genetic overlapping of red cell membrane protein disorders, and distinct frequency and mutation spectra differing among races make it difficult to understand this disease entity. On the other hand, genetic modifiers for the phenotype of β-globin diseases provide useful information for selecting the optimal treatment and for long-term management. Recently, next generation sequencing techniques have enabled us to determine the novel causative genes in patients with undiagnosed hemolytic anemias. We herein review the concept and strategy for genetic diagnosis of inherited hemolytic anemias.

Transparent nanocrystalline diamond coatings and devices

Science.gov (United States)

Sumant, Anirudha V.; Khan, Adam

2017-08-22

A method for coating a substrate comprises producing a plasma ball using a microwave plasma source in the presence of a mixture of gases. The plasma ball has a diameter. The plasma ball is disposed at a first distance from the substrate and the substrate is maintained at a first temperature. The plasma ball is maintained at the first distance from the substrate, and a diamond coating is deposited on the substrate. The diamond coating has a thickness. Furthermore, the diamond coating has an optical transparency of greater than about 80%. The diamond coating can include nanocrystalline diamond. The microwave plasma source can have a frequency of about 915 MHz.

Nanocrystalline diamond films for biomedical applications

DEFF Research Database (Denmark)

Pennisi, Cristian Pablo; Alcaide, Maria

2014-01-01

Nanocrystalline diamond films, which comprise the so called nanocrystalline diamond (NCD) and ultrananocrystalline diamond (UNCD), represent a class of biomaterials possessing outstanding mechanical, tribological, and electrical properties, which include high surface smoothness, high corrosion...... performance of nanocrystalline diamond films is reviewed from an application-specific perspective, covering topics such as enhancement of cellular adhesion, anti-fouling coatings, non-thrombogenic surfaces, micropatterning of cells and proteins, and immobilization of biomolecules for bioassays. In order...

Diamonds: Exploration, mines and marketing

Science.gov (United States)

Read, George H.; Janse, A. J. A. (Bram)

2009-11-01

The beauty, value and mystique of exceptional quality diamonds such as the 603 carat Lesotho Promise, recovered from the Letseng Mine in 2006, help to drive a multi-billion dollar diamond exploration, mining and marketing industry that operates in some 45 countries across the globe. Five countries, Botswana, Russia, Canada, South Africa and Angola account for 83% by value and 65% by weight of annual diamond production, which is mainly produced by four major companies, De Beers, Alrosa, Rio Tinto and BHP Billiton (BHPB), which together account for 78% by value and 72% by weight of annual diamond production for 2007. During the last twelve years 16 new diamond mines commenced production and 4 re-opened. In addition, 11 projects are in advanced evaluation and may begin operations within the next five years. Exploration for diamondiferous kimberlites was still energetic up to the last quarter of 2008 with most work carried out in Canada, Angola, Democratic Republic of the Congo (DRC) and Botswana. Many kimberlites were discovered but no new economic deposits were outlined as a result of this work, except for the discovery and possible development of the Bunder project by Rio Tinto in India. Exploration methods have benefitted greatly from improved techniques of high resolution geophysical aerial surveying, new research into the geochemistry of indicator minerals and further insights into the formation of diamonds and the relation to tectonic/structural events in the crust and mantle. Recent trends in diamond marketing indicate that prices for rough diamonds and polished goods were still rising up to the last quarter of 2008 and subsequently abruptly sank in line with the worldwide financial crisis. Most analysts predict that prices will rise again in the long term as the gap between supply and demand will widen because no new economic diamond discoveries have been made recently. The disparity between high rough and polished prices and low share prices of publicly

A new route to process diamond wires

Directory of Open Access Journals (Sweden)

Marcello Filgueira

2003-06-01

Full Text Available We propose an original route to process diamond wires, denominated In Situ Technology, whose fabrication involves mechanical conformation processes, such as rotary forging, copper tubes restacking, and thermal treatments, such as sintering and recrystallisation of a bronze 4 wt.% diamond composite. Tensile tests were performed, reaching an ultimate tensile strength (UTS of 230 MPa for the diameter of Æ = 1.84 mm. Scanning electron microscopy showed the diamond crystals distribution along the composite rope during its manufacture, as well as the diamond adhesion to the bronze matrix. Cutting tests were carried out with the processed wire, showing a probable performance 4 times higher than the diamond sawing discs, however its probable performance was about 5 to 8 times less than the conventional diamond wires (pearl system due to the low abrasion resistance of the bronze matrix, and low adhesion between the pair bronze-diamond due to the use of not metallised diamond single crystals.

The Geopolitical Setting of Conflict Diamonds.

Science.gov (United States)

Haggerty, S. E.

2002-05-01

September 11, 2001 will live in infamy. Ideological differences have also led to senseless atrocities in Angola, Congo Republic, Sierra Leone, and Liberia. Hundreds of thousands have died, scores mutilated, and millions displaced. These have gone virtually unnoticed for decades. Unnoticed that is until it became evident that these barbaric acts were fueled by the sale or bartering of diamonds for arms, or by more ingenious ways that are less traceable. There is no end in sight. Industry has long recognized that about 20% of diamonds reaching the open market are smuggled from operating mines, and more recently that an additional 4% originates from conflict diamond sources. Diamond identification by laser inscription, ion implantation, or certification protocols are subject to fraudulent tampering. And these applied methods are thwarted if cutting and polishing centers are infiltrated, or if terrorist facilities are independently established. Mark ups are substantial (40-60%) from raw material to finished product. Tracking the paths of rough stones from mines to faceted gems is impractical because some 30-50 million cts of top quality material, or about 100 million stones, would require branding each year. Moreover, the long standing tradition of site-holdings and the bourse system of mixing or matching diamonds, inadvertently ensures regional anonymity. Conflict diamonds are mined in primary kimberlites and from widely dispersed alluvial fields in tropical jungle. Landscapes, eroded by 1-5 vertical km over 100 Ma, have transformed low grade primary deposits into unconsolidated sedimentary bonanzas. The current value of stones retrieved, by motivated diggers and skillful jiggers, in rebel held territories, is impossible to determine, but in 1993 amounted to tens of millions USD. Diamonds over 100 cts continue to surface at premier prices. Borders are porous, diamonds flow easily, and armed networks are permeable and mobile. Diamonds form at great depths (over 200 km

CVD diamond windows for infrared synchrotron applications

International Nuclear Information System (INIS)

Sussmann, R.S.; Pickles, C.S.J.; Brandon, J.R.; Wort, C.J.H.; Coe, S.E.; Wasenczuk, A.; Dodge, C.N.; Beale, A.C.; Krehan, A.J.; Dore, P.; Nucara, A.; Calvani, P.

1998-01-01

This paper describes the attributes that make diamond a unique material for infrared synchrotron beam experiments. New developments in diamond synthesised by Chemical Vapour Deposition (CVD) promise to extend the range of applications which have been hitherto limited by the availability and cost of large-size single-crystal diamond. Polycrystalline CVD diamond components such as large (100 mm) diameter windows with extremely good transparency over a wide spectral range are now commercially available. Properties of CVD diamond of relevance to optical applications, such as mechanical strength, thermal conductivity and absolute bulk absorption, are discussed. It is shown that although some of the properties of CVD diamond (similar to other polycrystalline industrial ceramics) are affected by the grain structure, currently produced CVD diamond optical components have the quality and performance required for numerous demanding applications

Diamond Nucleation Using Polyethene

Science.gov (United States)

Morell, Gerardo (Inventor); Makarov, Vladimir (Inventor); Varshney, Deepak (Inventor); Weiner, Brad (Inventor)

2013-01-01

The invention presents a simple, non-destructive and non-abrasive method of diamond nucleation using polyethene. It particularly describes the nucleation of diamond on an electrically viable substrate surface using polyethene via chemical vapor deposition (CVD) technique in a gaseous environment.

Diamond Growth in the Subduction Factory

Science.gov (United States)

Bureau, H.; Frost, D. J.; Bolfan-Casanova, N.; Leroy, C.; Estève, I.

2014-12-01

Natural diamonds are fabulous probes of the deep Earth Interior. They are the evidence of the deep storage of volatile elements, carbon at first, but also hydrogen and chlorine trapped as hydrous fluids in inclusions. The study of diamond growth processes in the lithosphere and mantle helps for our understanding of volatile elements cycling between deep reservoirs. We know now that inclusion-bearing diamonds similar to diamonds found in nature (i.e. polycrystalline, fibrous and coated diamonds) can grow in hydrous fluids or melts (Bureau et al., GCA 77, 202-214, 2012). Therefore, we propose that the best environment to promote such diamonds is the subduction factory, where highly hydrous fluids or melts are present. When oceanic plates are subducted in the lithosphere, they carry an oceanic crust soaked with seawater. While the slabs are traveling en route to the mantle, dehydration processes generate saline fluids highly concentrated in NaCl. In the present study we have experimentally shown that diamonds can grow from the saline fluids (up to 30 g/l NaCl in water) generated in subducted slabs. We have performed multi-anvil press experiments at 6-7 GPa and from 1300 to 1400°C during 6:00 hours to 30:00 hours. We observed large areas of new diamond grown in epitaxy on pure diamond seeds in salty hydrous carbonated melts, forming coated gems. The new rims are containing multi-component primary inclusions. Detailed characterizations of the diamonds and their inclusions have been performed and will be presented. These experimental results suggest that multi-component salty fluids of supercritical nature migrate with the slabs, down to the deep mantle. Such fluids may insure the first stage of the deep Earth's volatiles cycling (C, H, halogen elements) en route to the transition zone and the lower mantle. We suggest that the subduction factory may also be a diamond factory.

Anemias hemolíticas

Directory of Open Access Journals (Sweden)

Ricardo Cediel Ángel

1957-04-01

Full Text Available Hayem (1898 y más tarde Widal (1907 señalaron que, al paso que la forma congénita clásica de anemia hemolítica de Minkowski y Chauffard a menudo causaba pocos síntomas, otro tipo que ellos clasificaron como adquirido, con frecuencia' se asociaba con anemia severa y acentuada incapacidad. Incluyeron allí casos de excesiva destrucción de sangre asociada a diversas infecciones ó intoxicaciones lo mismo que casos de etiología desconocida. Chauffard fue capaz de demostrar autohemolisinas en el suero de unos pocos casos de anemia hemolítica aguda adquirida y se refirió a ellos como "ictericias hemolisínicas". Sin embargo por muchos años existió la duda de que hubiera un verdadero tipo de anemia hemolítica adquirida y muy poco fue tenida en cuenta la posibilidad de que pudiera jugar papel en estos casos una reacción inmunológica.

Genetics Home Reference: iron-refractory iron deficiency anemia

Science.gov (United States)

... refractory iron deficiency anemia Iron-refractory iron deficiency anemia Printable PDF Open All Close All Enable Javascript ... expand/collapse boxes. Description Iron-refractory iron deficiency anemia is one of many types of anemia , which ...

The challenge of microangiopathic hemolytic anemia

Directory of Open Access Journals (Sweden)

Hassanain Hani Hassan

2017-01-01

Full Text Available Microangiopathic hemolytic anemia (MAHA is a Coomb's-negative hemolytic anemia characterized by red cell fragmentation (schistocytes. Thrombotic microangiopathy anemia, including thrombotic thrombocytopenia and hemolytic-uremic syndrome, malignant hypertension, preeclampsia are among the most common causes. We present a case of MAHA presenting with thrombocytopenia initially diagnosed as MAHA secondary to thrombotic thrombocytopenic purpura and received five sessions plasmapheresis without improvement but with worsening of anemia and thrombocytopenia. On further inquiry, glucose-6-phosphate dehydrogenase deficiency was identified, and the patient showed dramatic recovery after the trial of B12 and folate.

Substitutional Boron in Nanodiamond, Bucky-Diamond, and Nanocrystalline Diamond Grain Boundaries

Energy Technology Data Exchange (ETDEWEB)

Barnard, Amanda S.; Sternberg, Michael G.

2006-10-05

Although boron has been known for many years to be a successful dopant in bulk diamond, efficient doping of nanocrystalline diamond with boron is still being developed. In general, the location, configuration, and bonding structure of boron in nanodiamond is still unknown, including the fundamental question of whether it is located within grains or grain boundaries of thin films and whether it is within the core or at the surface of nanoparticles. Presented here are density functional tight-binding simulations examining the configuration, potential energy surface, and electronic charge of substitutional boron in various types of nanocrystalline diamond. The results predict that boron is likely to be positioned at the surface of isolated particles and at the grain boundary of thin-film samples.

Ultimate Atomic Bling: Nanotechnology of Diamonds

Energy Technology Data Exchange (ETDEWEB)

Dahl, Jeremy

2010-05-25

Diamonds exist in all sizes, from the Hope Diamond to minuscule crystals only a few atoms across. The smallest of these diamonds are created naturally by the same processes that make petroleum. Recently, researchers discovered that these 'diamondoids' are formed in many different structural shapes, and that these shapes can be used like LEGO blocks for nanotechnology. This talk will discuss the discovery of these nano-size diamonds and highlight current SLAC/Stanford research into their applications in electronics and medicine.

Ultimate Atomic Bling: Nanotechnology of Diamonds

International Nuclear Information System (INIS)

Dahl, Jeremy

2010-01-01

Diamonds exist in all sizes, from the Hope Diamond to minuscule crystals only a few atoms across. The smallest of these diamonds are created naturally by the same processes that make petroleum. Recently, researchers discovered that these 'diamondoids' are formed in many different structural shapes, and that these shapes can be used like LEGO blocks for nanotechnology. This talk will discuss the discovery of these nano-size diamonds and highlight current SLAC/Stanford research into their applications in electronics and medicine.

Architecting boron nanostructure on the diamond particle surface

International Nuclear Information System (INIS)

Bai, H.; Dai, D.; Yu, J.H.; Nishimura, K.; Sasaoka, S.; Jiang, N.

2014-01-01

The present study provides an efficient approach for nano-functionalization of diamond powders. Boron nanostructure can be grown on diamond particle entire surface by a simple heat-treatment process. After treatment, various boron nanoforms were grown on the diamond particle surface at different processing temperature. High-density boron nanowires (BNWs) grow on the diamond particle entire surface at 1333 K, while nanopillars cover diamond powders when the heat treatment process is performed at 1393 K. The influence of the pretreatment temperature on the microstructure and thermal conductivity of Cu/diamond composites were investigated. Cu/diamond composites with high thermal conductivity of 670 W (m K) −1 was obtained, which was achieved by the formation of large number of nanowires and nanopillars on the diamond particle surface.

Cold cathodes on ultra-dispersed diamond base

International Nuclear Information System (INIS)

Alimova, A.N.; Zhirnov, V.V.; Chubun, N.N.; Belobrov, P.I.

1998-01-01

Prospects of application of nano diamond powders for fabrication of cold cathodes are discussed.Cold cathodes based on silicon pointed structures with nano diamond coatings were prepared.The deposition technique of diamond coating was dielectrophoresis from suspension of nano diamond powder in organic liquids.The cathodes were tested in sealed prototypes of vacuum electronic devices

Metformin Therapy for Fanconis Anemia

Science.gov (United States)

2017-08-01

AWARD NUMBER: W81XWH-16-1-0300 TITLE: Metformin Therapy for Fanconis Anemia PRINCIPAL INVESTIGATOR: Markus Grompe CONTRACTING ORGANIZATION... Anemia 5a. CONTRACT NUMBER 5b. GRANT NUMBER W81XWH-16-1-0300 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Markus Grompe 5d. PROJECT NUMBER 5e. TASK...298 (Rev. 8-98) Prescribed by ANSI Std. Z39.18 This award pertains to the treatment of the inherited bone marrow failure syndrome Fanconi’s Anemia

Diamond growth in oxygen-acetylene flame

International Nuclear Information System (INIS)

Haga, Mario S.; Nagai, Y. Ernesto; Suzuki, Carlos K.

1995-01-01

What was supposed to be a laboratory curiosity in the 80's, in recent years the low pressure process for the production of man-made diamond turned out to be a major target for research and development of many high-tech companies. The main reason for such an interest stems on the possibility of coating many materials with a diamond film possessing the same amazing properties of the bulk natural diamond. Polycrystalline diamond film has been deposited on Mo substrate by using oxygen-acetylene flame of a welding torch. The substrate temperature has been held constant about 700 d eg C by means of a water cooled mount designed properly. Precision flowmeters have been used to control the flow ratio oxygen/acetylene, a key parameter for the success in diamond growth. Diamond has been detected by X-ray diffraction, a fast foolproof technique for crystal identification. Another method of analysis often used in Raman spectroscopy, which is able to exhibit amorphous structure besides crystalline phase. (author)

Copper-micrometer-sized diamond nanostructured composites

International Nuclear Information System (INIS)

Nunes, D; Livramento, V; Fernandes, H; Silva, C; Carvalho, P A; Shohoji, N; Correia, J B

2011-01-01

Reinforcement of a copper matrix with diamond enables tailoring the properties demanded for thermal management applications at high temperature, such as the ones required for heat sink materials in low activated nuclear fusion reactors. For an optimum compromise between thermal conductivity and mechanical properties, a novel approach based on multiscale diamond dispersions is proposed: a Cu-nanodiamond composite produced by milling is used as a nanostructured matrix for further dispersion of micrometer-sized diamond (μDiamond). A series of Cu-nanodiamond mixtures have been milled to establish a suitable nanodiamond fraction. A refined matrix with homogeneously dispersed nanoparticles was obtained with 4 at.% μDiamond for posterior mixture with microdiamond and subsequent consolidation. Preliminary consolidation by hot extrusion of a mixture of pure copper and μDiamond has been carried out to define optimal processing parameters. The materials produced were characterized by x-ray diffraction, scanning and transmission electron microscopy and microhardness measurements.

Development of CVD diamond radiation detectors

CERN Document Server

Adam, W; Berdermann, E; Bogani, F; Borchi, E; Bruzzi, Mara; Colledani, C; Conway, J; Dabrowski, W; Delpierre, P A; Deneuville, A; Dulinski, W; van Eijk, B; Fallou, A; Fisch, D; Foulon, F; Friedl, M; Gan, K K; Gheeraert, E; Grigoriev, E A; Hallewell, G D; Hall-Wilton, R; Han, S; Hartjes, F G; Hrubec, Josef; Husson, D; Kagan, H; Kania, D R; Kaplon, J; Kass, R; Knöpfle, K T; Krammer, Manfred; Manfredi, P F; Meier, D; Mishina, M; Le Normand, F; Pan, L S; Pernegger, H; Pernicka, Manfred; Pirollo, S; Re, V; Riester, J L; Roe, S; Roff, D G; Rudge, A; Schnetzer, S R; Sciortino, S; Speziali, V; Stelzer, H; Stone, R; Tapper, R J; Tesarek, R J; Thomson, G B; Trawick, M L; Trischuk, W; Turchetta, R; Walsh, A M; Wedenig, R; Weilhammer, Peter; Ziock, H J; Zoeller, M M

1998-01-01

Diamond is a nearly ideal material for detecting ionizing radiation. Its outstanding radiation hardness, fast charge collection and low leakage current allow a diamond detector to be used in high ra diation, high temperature and in aggressive chemical media. We have constructed charged particle detectors using high quality CVD diamond. Characterization of the diamond samples and various detect ors are presented in terms of collection distance, $d=\\mu E \\tau$, the average distance electron-hole pairs move apart under the influence of an electric field, where $\\mu$ is the sum of carrier mo bilities, $E$ is the applied electric field, and $\\tau$ is the mobility weighted carrier lifetime. Over the last two years the collection distance increased from $\\sim$ 75 $\\mu$m to over 200 $\\mu$ m. With this high quality CVD diamond a series of micro-strip and pixel particle detectors have been constructed. These devices were tested to determine their position resolution and signal to n oise performance. Diamond detectors w...

Anemia and survival in human immunodeficiency virus

DEFF Research Database (Denmark)

Lundgren, Jens Dilling; Mocroft, Amanda

2003-01-01

The prospective, multicenter cohort study EuroSIDA has previously reported on predictors and outcomes of anemia in patients infected with human immunodeficiency virus. In a Cox proportional-hazards model with serial measures of CD4+ cell count, plasma viral load, and degrees of anemia fitted...... as time-dependent variables, the relative hazard of death increased markedly for patients with anemia versus no anemia. A clinical scoring system was developed and validated for patients receiving highly active antiretroviral therapy using the most recent laboratory measures. Mild and severe anemia were...... independently (Panemia. The mechanisms underlying why hemoglobin is such a strong prognostic...

Genetics Home Reference: X-linked sideroblastic anemia

Science.gov (United States)

... Conditions X-linked sideroblastic anemia X-linked sideroblastic anemia Printable PDF Open All Close All Enable Javascript ... the expand/collapse boxes. Description X-linked sideroblastic anemia is an inherited disorder that prevents developing red ...

Special Issues for People with Aplastic Anemia

Science.gov (United States)

... Menu Donate Special Issues for People with Aplastic Anemia Because you have aplastic anemia , everyday events can ... bleeding, such as contact sports. Pregnancy and Aplastic Anemia Pregnancy is possible for women who have been ...

X-ray topographic study of diamonds: implications for the genetic nature of inclusions in diamond

Science.gov (United States)

Agrosì, Giovanna; Nestola, Fabrizio; Tempesta, Gioacchino; Bruno, Marco; Scandale, Eugenio; Harris, Jeff W.

2014-05-01

In recent years, several studies have focused on the growth conditions of the diamonds through the analysis of the mineral inclusions trapped in them (Howell, 2012 and references therein). Nevertheless, to obtain rigorous information about chemical and physical conditions of diamond formation, it is crucial to determine if the crystallization of the inclusions occurred before (protogenetic nature), during (syngenetic nature) or after (epigenetic nature) the growth of diamond (Wiggers de Vries et al., 2011). X-ray topography (XRDT) can be a helpful tool to verify the genetic nature of inclusions in diamond. This technique characterizes the extended defects and reconstructs the growth history of the samples (Agrosì et al., 2013 and references therein) and, consequently contributes to elucidation of the relationship between the inclusions and the host-diamond. With this aim a diamond from the Udachnaya kimberlite, Siberia, was investigated. The diamond crystal was the one previously studied by Nestola et al. (2011) who performed in-situ crystal structure refinement of the inclusions to obtain data about the formation pressure. The inclusions were iso-oriented olivines that did not show evident cracks and subsequently could not be considered epigenetic. Optical observations revealed an anomalous birefringence in the adjacent diamond and the inclusions had typical "diamond-imposed cubo-octahedral" shape for the largest olivine. The diffraction contrast study shows that the diamond exhibits significant deformation fields related to plastic post growth deformation. The crystallographic direction of strains was established applying the extinction criterion. Section topographs were taken to minimize the overlapping of the strain field associate with the different defects and revealed that no dislocations nucleated from the olivine inclusions. Generally, when a solid inclusion has been incorporated in the growing crystal, the associated volume distortion can be minimized by

LAMA HAID DAN KEJADIAN ANEMIA PADA REMAJA PUTRI

Directory of Open Access Journals (Sweden)

Febrianti Febrianti

2015-04-01

Full Text Available Latar belakang: Madrasah Aliyah Negeri (MAN 2 Bogor adalah sekolah dengan angka  prevalensi anemia tertinggi di kota Bogor. Dari pemeriksaan Puskesmas Bogor Timur pada tahun 2009, ada 65,8 persen  siswi sekolah tersebut yang menderita anemia. Tujuan:  Identifikasi faktor-faktor yang berhubungan dengan kejadian anemia. Metode: Penelitian kuantitatif dengan rancangan potong lintang. Variabel dependen adalah kejadian anemia. Variabel independen terdiri atas lama haid, frekuensi makan, kebiasaan makan buah-buahan, kebiasaan makan protein hewani, kebiasaan makan protein nabati, dan kebiasaan minum teh. Pengumpulan data dilakukan dua tahap yaitu pengisian kuesioner dan pengambilan sampel darah. Data dianalisis univariat dan bivariat. Hasil:  Ditemukan  hubungan  yang  bermakna  antara  lama  haid  dengan  kejadian  anemia remaja  putri  (p value=0.028. Variabel lain tidak memiliki hubungan yang bermakna dengan anemia.  Kesimpulan: Prevalensi anemia di MAN 2 Bogor berhubungan dengan lama haid dan tidak berhubungan dengan variabel lain.  Kata kunci: anemia remaja putri, faktor-faktor anemia, lama haid.

Avoiding Anemia: Boost Your Red Blood Cells

Science.gov (United States)

... Issues Subscribe January 2014 Print this issue Avoiding Anemia Boost Your Red Blood Cells En español Send ... Disease When Blood Cells Bend Wise Choices Preventing Anemia To prevent or treat iron-deficiency anemia: Eat ...

Diamond nanowires: fabrication, structure, properties, and applications.

Science.gov (United States)

Yu, Yuan; Wu, Liangzhuan; Zhi, Jinfang

2014-12-22

C(sp(3) )C-bonded diamond nanowires are wide band gap semiconductors that exhibit a combination of superior properties such as negative electron affinity, chemical inertness, high Young's modulus, the highest hardness, and room-temperature thermal conductivity. The creation of 1D diamond nanowires with their giant surface-to-volume ratio enhancements makes it possible to control and enhance the fundamental properties of diamond. Although theoretical comparisons with carbon nanotubes have shown that diamond nanowires are energetically and mechanically viable structures, reproducibly synthesizing the crystalline diamond nanowires has remained challenging. We present a comprehensive, up-to-date review of diamond nanowires, including a discussion of their synthesis along with their structures, properties, and applications. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Performance and characterisation of CVD diamond coated, sintered diamond and WC-Co cutting tools for dental and micromachining applications

International Nuclear Information System (INIS)

Sein, Htet; Ahmed, Waqar; Jackson, Mark; Woodwards, Robert; Polini, Riccardo

2004-01-01

Diamond coatings are attractive for cutting processes due to their high hardness, low friction coefficient, excellent wear resistance and chemical inertness. The application of diamond coatings on cemented tungsten carbide (WC-Co) tools was the subject of much attention in recent years in order to improve cutting performance and tool life. WC-Co tools containing 6% Co and 94% WC substrate with an average grain size 1-3 μm were used in this study. In order to improve the adhesion between diamond and WC substrates, it is necessary to etch away the surface Co and prepare the surface for subsequent diamond growth. Hot filament chemical vapour deposition with a modified vertical filament arrangement has been employed for the deposition of diamond films. Diamond film quality and purity have been characterised using scanning electron microscopy and micro-Raman spectroscopy. The performance of diamond coated WC-Co bur, uncoated WC-Co bur, and diamond embedded (sintered) bur have been compared by drilling a series of holes into various materials such as human teeth, borosilicate glass and porcelain teeth. Flank wear has been used to assess the wear rates of the tools. The materials subjected to cutting processes have been examined to assess the quality of the finish. Diamond coated WC-Co microdrills and uncoated microdrills were also tested on aluminium alloys. Results show that there was a 300% improvement when the drills were coated with diamond compared to the uncoated tools

Concepts of anemia among low income Nicaraguan women Conceptos de anemia entre mujeres nicaragüenses de baja renta Conceitos de anemia entre mulheres nicaragüenses de baixa renda

Directory of Open Access Journals (Sweden)

Rita L. Ailinger

2009-04-01

Full Text Available Anemia is a common health problem among women throughout the world, however, there has been minimal research on women's concepts of anemia. The purpose of this study was to examine concepts of anemia in low income Nicaraguan women. A qualitative design was used. Audio-taped open-ended interviews in Spanish with 14 women were used to obtain data. Tapes were transcribed and content analyzed. The findings indicate that few of the women had biomedically accurate concepts of anemia, such as that it was due to lack of iron from poor eating. Others held folk medical beliefs including home remedies, for example drinking the milk of a mare or beet juice and eating certain foods such as bean soup. Most of the women did not know any symptoms of anemia and a few reported that it can develop into leukemia. These concepts of anemia are instructive for nurses working with patients from Nicaragua and will be useful in developing nursing interventions to alleviate this public health problem.La anemia es un problema de salud común entre las mujeres alrededor del mundo, sin embargo, se han realizado pocas investigaciones sobre los conceptos de anemia entre las mujeres. El propósito de este estudio fue examinar los conceptos de anemia en mujeres Nicaragüenses de bajos ingresos económicos. La investigación fue de orden cualitativa. Para la recolección de datos, se realizaron entrevistas semiestructuradas, grabadas en castellano, con 14 mujeres. Las cintas grabadas fueron transcritas y se realizó un análisis de contenido. Los resultados indican que pocas mujeres poseen conocimientos biomédicos sobre anemia, por ejemplo, la ingestión de alimentos pobres en hierro. Otras expresaron creencias populares, como remedios caseros, ingestión de leche de yegua o jugo de remolacha y ciertos alimentos como sopa de judías. La mayoría de las mujeres no conocía ningún síntoma de anemia y pocas relataron que creían que esta enfermedad podría transformarse en

STRUCTURING OF DIAMOND FILMS USING MICROSPHERE LITHOGRAPHY

Directory of Open Access Journals (Sweden)

Mária Domonkos

2014-10-01

Full Text Available In this study, the structuring of micro- and nanocrystalline diamond thin films is demonstrated. The structuring of the diamond films is performed using the technique of microsphere lithography followed by reactive ion etching. Specifically, this paper presents a four-step fabrication process: diamond deposition (microwave plasma assisted chemical vapor deposition, mask preparation (by the standard Langmuir-Blodgett method, mask modification and diamond etching. A self-assembled monolayer of monodisperse polystyrene (PS microspheres with close-packed ordering is used as the primary template. Then the PS microspheres and the diamond films are processed in capacitively coupled radiofrequency plasma  using different plasma chemistries. This fabrication method illustrates the preparation of large arrays of periodic and homogeneous hillock-like structures. The surface morphology of processed diamond films is characterized by scanning electron microscopy and atomic force microscope. The potential applications of such diamond structures in various fields of nanotechnology are also briefly discussed.

Note: Evaluation of microfracture strength of diamond materials using nano-polycrystalline diamond spherical indenter

Science.gov (United States)

Sumiya, H.; Hamaki, K.; Harano, K.

2018-05-01

Ultra-hard and high-strength spherical indenters with high precision and sphericity were successfully prepared from nanopolycrystalline diamond (NPD) synthesized by direct conversion sintering from graphite under high pressure and high temperature. It was shown that highly accurate and stable microfracture strength tests can be performed on various super-hard diamond materials by using the NPD spherical indenters. It was also verified that this technique enables quantitative evaluation of the strength characteristics of single crystal diamonds and NPDs which have been quite difficult to evaluate.

Socio-economic and demographic determinants of childhood anemia

Directory of Open Access Journals (Sweden)

Sankar Goswmai

2015-09-01

Full Text Available Objective: To evaluate socio-economic and demographic determinants of anemia among Indian children aged 6–59 months. Methods: Statistical analysis was performed on the cross-sectional weighted sample of 40,885 children from 2005 to 2006 National Family Health Survey by using multinomial logistic regression to assess the significance of some risk factors in different degrees of child anemia. Anemia was diagnosed by World Health Organization (WHO cut-off points on hemoglobin level. Pearson's chi-squared test was applied to justify the associations of anemia with different categories of the study population. Results: The prevalence of anemia was 69.5%; 26.2% mild, 40.4% moderate, and 2.9% severe anemia. Overall prevalence rate, along with mild and moderate cases, showed an increasing trend up to 2 years of age and then decreased. Rural children had a higher prevalence rate. Of 28 Indian states in the study, 10 states showed very high prevalence, the highest being Bihar (77.9%. Higher birth order, high index of poverty, low level of maternal education, mother's anemia, non-intake of iron supplements during pregnancy, and vegetarian mother increased the risks of all types of anemia among children (p < 0.05. Christian population was at lower risk; and Scheduled Caste, Scheduled Tribe, and Other Backward Class categories were at higher risk of anemia. Conclusion: The results suggest a need for proper planning and implementation of preventive measures to combat child anemia. Economically under-privileged groups, maternal nutrition and education, and birth control measures should be priorities in the programs. Resumo: Objetivo: Avaliar os fatores socioeconômicos e demográficos determinantes de anemia em crianças indianas com idade de 6 a 59 meses. Métodos: A análise estatística foi realizada na amostra transversal ponderada de 40885 crianças da Pesquisa Nacional de Saúde da Família de 2005–2006, Governo da Índia, utilizando a técnica de

Anemia Aplástica e Gravidez: Relato de Caso Aplastic Anemia and Pregnancy: A Case Report

Directory of Open Access Journals (Sweden)

Rosiane Alves de Sousa Teles

2002-06-01

Full Text Available A anemia aplástica é distúrbio caracterizado por pancitopenia e medula óssea hipocelular, com substituição gordurosa dos elementos e sem nenhum sinal de transformação maligna ou doença mieloproliferativa. Acomete geralmente adultos jovens e idosos, sem preferência sexual. A maioria dos casos é adquirida, mas pode ocorrer hereditariamente, por distúrbio molecular (anemia de Fanconi. A associação com gravidez é rara, estando relacionada com alta morbidade e mortalidade materna e fetal. Os autores descrevem o caso de uma paciente com anemia aplástica, diagnosticada previamente, cuja gestação complicou com infecção do trato urinário, doença hipertensiva específica da gestação e restrição de crescimento fetal, com parto prematuro eletivo. Apesar das condições adversas na gravidez e parto, mãe e recém-nascido tiveram evolução clínica satisfatória.Aplastic anemia is characterized by a circulating pancytopenia, hypocellularity, and fatty replacement of cellular marrow elements, without evidence of malignant transformation or myeloproliferative disease. It usually affects young and senior adults, without any sexual preference. Most cases of aplastic anemia are acquired, but the disease may also be inherited due to a molecular disorder (Fanconi's anemia. Aplastic anemia in pregnancy is an extremely rare condition with high maternal and fetal morbidity and mortality rates. The authors describe a case of a patient with previously diagnosed aplastic anemia, whose pregnancy was complicated with urinary tract infection, preeclampsia and fetal growth restriction, with elective preterm birth. In spite of the adverse conditions in pregnancy and delivery, mother and newborn had a satisfactory clinical evolution.

Diamond detector technology: status and perspectives

CERN Document Server

Kagan, Harris; Artuso, M; Bachmair, F; Bäni, L; Bartosik, M; Beacham, J; Beck, H P; Bellini,, V; Belyaev, V; Bentele, B; Berdermann, E; Bergonzo, P; Bes, A; Brom, J-M; Bruzzi, M; Cerv, M; Chiodini, G; Chren, D; Cindro, V; Claus, G; Collot, J; Cumalat, J; Dabrowski, A; D'Alessandro, R; De Boer, W; Dehning, B; Dorfer, C; Dunser, M; Eremin, V; Eusebi, R; Forcolin, G; Forneris, J; Frais-Kölbl, H; Gan, K K; Gastal, M; Giroletti, C; Goffe, M; Goldstein, J; Golubev, A; Gorišek, A; Grigoriev, E; Grosse-Knetter, J; Grummer, A; Gui, B; Guthoff, M; Haughton, I; Hiti, B; Hits, D; Hoeferkamp, M; Hofmann, T; Hosslet, J; Hostachy, J-Y; Hügging, F; Hutton, C; Jansen, H; Janssen, J; Kanxheri, K; Kasieczka, G; Kass, R; Kassel, F; Kis, M; Kramberger, G; Kuleshov, S; Lacoste, A; Lagomarsino, S; Lo Giudice, A; Lukosi, E; Maazouzi, C; Mandic, I; Mathieu, C; Mcfadden, N; Menichelli, M; Mikuž, M; Morozzi, A; Moss, J; Mountain, R; Murphy, S; Muškinja, M; Oh, A; Oliviero, P; Passeri, D; Pernegger, H; Perrino, R; Picollo, F; Pomorski, M; Potenza, R; Quadt, A; Re, A; Reichmann, M; Riley, G; Roe, S; Sanz, D; Scaringella, M; Schaefer, D; Schmidt, C J; Schnetzer, S; Schreiner, T; Sciortino, S; Scorzoni, A; Seidel, S; Servoli, L; Sopko, B; Sopko, V; Spagnolo, S; Spanier, S; Stenson, K; Stone, R; Sutera, C; Taylor, Aaron; Traeger, M; Tromson, D; Trischuk, W; Tuve, C; Uplegger, L; Velthuis, J; Venturi, N; Vittone, E; Wagner, Stephen; Wallny, R; Wang, J C; Weingarten, J; Weiss, C; Wengler, T; Wermes, N; Yamouni, M; Zavrtanik, M

2017-01-01

The status of material development of poly-crystalline chemical vapor deposition (CVD) diamond is presented. We also present beam test results on the independence of signal size on incident par-ticle rate in charged particle detectors based on un-irradiated and irradiated poly-crystalline CVD diamond over a range of particle fluxes from 2 kHz/cm2 to 10 MHz/cm2. The pulse height of the sensors was measured with readout electronics with a peaking time of 6 ns. In addition the first beam test results from 3D detectors made with poly-crystalline CVD diamond are presented. Finally the first analysis of LHC data from the ATLAS Diamond Beam Monitor (DBM) which is based on pixelated poly-crystalline CVD diamond sensors bump-bonded to pixel readout elec-tronics is shown.

Diamond electrophoretic microchips-Joule heating effects

International Nuclear Information System (INIS)

Karczemska, Anna T.; Witkowski, Dariusz; Ralchenko, Victor; Bolshakov, Andrey; Sovyk, Dmitry; Lysko, Jan M.; Fijalkowski, Mateusz; Bodzenta, Jerzy; Hassard, John

2011-01-01

Microchip electrophoresis (MCE) has become a mature separation technique in the recent years. In the presented research, a polycrystalline diamond electrophoretic microchip was manufactured with a microwave plasma chemical vapour deposition (MPCVD) method. A replica technique (mould method) was used to manufacture microstructures in diamond. A numerical analysis with CoventorWare TM was used to compare thermal properties during chip electrophoresis of diamond and glass microchips of the same geometries. Temperature distributions in microchips were demonstrated. Thermal, electrical, optical, chemical and mechanical parameters of the polycrystalline diamond layers are advantageous over traditionally used materials for microfluidic devices. Especially, a very high thermal conductivity coefficient gives a possibility of very efficient dissipation of Joule heat from the diamond electrophoretic microchip. This enables manufacturing of a new generation of microdevices.

Diamond electrophoretic microchips-Joule heating effects

Energy Technology Data Exchange (ETDEWEB)

Karczemska, Anna T., E-mail: anna.karczemska@p.lodz.pl [Technical University of Lodz, Institute of Turbomachinery, 219/223 Wolczanska str., Lodz (Poland); Witkowski, Dariusz [Technical University of Lodz, Institute of Turbomachinery, 219/223 Wolczanska str., Lodz (Poland); Ralchenko, Victor, E-mail: ralchenko@nsc.gpi.ru [General Physics Institute, Russian Academy of Science, 38 Vavilov str., Moscow (Russian Federation); Bolshakov, Andrey; Sovyk, Dmitry [General Physics Institute, Russian Academy of Science, 38 Vavilov str., Moscow (Russian Federation); Lysko, Jan M., E-mail: jmlysko@ite.waw.pl [Institute of Electron Technology, Al. Lotnikow 32/46, 02-668 Warsaw (Poland); Fijalkowski, Mateusz, E-mail: petr.louda@vslib.cz [Technical University of Liberec, Faculty of Mechanical Engineering (Czech Republic); Bodzenta, Jerzy, E-mail: jerzy.bodzenta@polsl.pl [Silesian University of Technology, Institute of Physics, 2 Krzywoustego str., 44-100 Gliwice (Poland); Hassard, John, E-mail: j.hassard@imperial.ac.uk [Imperial College of Science, Technology and Medicine, London (United Kingdom)

2011-03-15

Microchip electrophoresis (MCE) has become a mature separation technique in the recent years. In the presented research, a polycrystalline diamond electrophoretic microchip was manufactured with a microwave plasma chemical vapour deposition (MPCVD) method. A replica technique (mould method) was used to manufacture microstructures in diamond. A numerical analysis with CoventorWare{sup TM} was used to compare thermal properties during chip electrophoresis of diamond and glass microchips of the same geometries. Temperature distributions in microchips were demonstrated. Thermal, electrical, optical, chemical and mechanical parameters of the polycrystalline diamond layers are advantageous over traditionally used materials for microfluidic devices. Especially, a very high thermal conductivity coefficient gives a possibility of very efficient dissipation of Joule heat from the diamond electrophoretic microchip. This enables manufacturing of a new generation of microdevices.

Ohmic contacts to semiconducting diamond

Science.gov (United States)

Zeidler, James R.; Taylor, M. J.; Zeisse, Carl R.; Hewett, C. A.; Delahoussaye, Paul R.

1990-10-01

Work was carried out to improve the electron beam evaporation system in order to achieve better deposited films. The basic system is an ion pumped vacuum chamber, with a three-hearth, single-gun e-beam evaporator. Four improvements were made to the system. The system was thoroughly cleaned and new ion pump elements, an e-gun beam adjust unit, and a more accurate crystal monitor were installed. The system now has a base pressure of 3 X 10(exp -9) Torr, and can easily deposit high-melting-temperature metals such as Ta with an accurately controlled thickness. Improved shadow masks were also fabricated for better alignment and control of corner contacts for electrical transport measurements. Appendices include: A Thermally Activated Solid State Reaction Process for Fabricating Ohmic Contacts to Semiconducting Diamond; Tantalum Ohmic Contacts to Diamond by a Solid State Reaction Process; Metallization of Semiconducting Diamond: Mo, Mo/Au, and Mo/Ni/Au; Specific Contact Resistance Measurements of Ohmic Contracts to Diamond; and Electrical Activation of Boron Implanted into Diamond.

Diamond-Based Supercapacitors: Realization and Properties.

Science.gov (United States)

Gao, Fang; Nebel, Christoph E

2016-10-26

In this Spotlight on Applications, we describe our recent progress on the fabrication of surface-enlarged boron-doped polycrystalline diamond electrodes, and evaluate their performance in supercapacitor applications. We begin with a discussion of the fabrication methods of porous diamond materials. The diamond surface enlargement starts with a top-down plasma etching method. Although the extra surface area provided by surface roughening or nanostructuring provides good outcome for sensing applications, a capacitance value <1 mF cm -2 or a surface-enlargement factor <100 fail to meet the requirement of a practical supercapacitor. Driven by the need for large surface areas, we recently focused on the tempated-growth method. We worked on both supported and free-standing porous diamond materials to enhance the areal capacitance to the "mF cm -2 " range. With our newly developed free-standing diamond paper, areal capacitance can be multiplied by stacking multilayers of the electrode material. Finally, considering the fact that there is no real diamond-based supercapacitor device up to now, we fabricated the first prototype pouch-cell device based on the free-standing diamond paper to evaluate its performance. The results reveal that the diamond paper is suitable for operation in high potential windows (up to 2.5 V) in aqueous electrolyte with a capacitance of 0.688 mF cm -2 per layer of paper (or 0.645 F g -1 ). Impedance spectroscopy revealed that the operation frequency of the device exceeds 30 Hz. Because of the large potential window and the ability to work at high frequency, the specific power of the device reached 1 × 10 5 W kg -1 . In the end, we made estimations on the future target performance of diamond supercapacitors based on the existing information.

Modifying thin film diamond for electronic applications

International Nuclear Information System (INIS)

Baral, B.

1999-01-01

The unique combination of properties that diamond possesses are being exploited in both electronic and mechanical applications. An important step forward in the field has been the ability to grow thin film diamond by chemical vapour deposition (CVD) methods and to control parameters such as crystal orientation, dopant level and surface roughness. An extensive understanding of the surface of any potential electronic material is vital to fully comprehend its behaviour within device structures. The surface itself ultimately controls key aspects of device performance when interfaced with other materials. This study has provided insight into important chemical reactions on polycrystalline CVD diamond surfaces, addressing how certain surface modifications will ultimately affect the properties of the material. A review of the structure, bonding, properties and potential of diamond along with an account of the current state of diamond technology and CVD diamond growth is provided. The experimental chapter reviews bulk material and surface analytical techniques employed in this work and is followed by an investigation of cleaning treatments for polycrystalline CVD diamond aimed at removing non-diamond carbon from the surface. Selective acid etch treatments are compared and contrasted for efficacy with excimer laser irradiation and hydrogen plasma etching. The adsorption/desorption kinetics of potential dopant-containing precursors on polycrystalline CVD diamond surfaces have been investigated to compare their effectiveness at introducing dopants into the diamond during the growth stage. Both boron and sulphur-containing precursor compounds have been investigated. Treating polycrystalline CVD diamond in various atmospheres / combination of atmospheres has been performed to enhance electron field emission from the films. Films which do not emit electrons under low field conditions can be modified such that they emit at fields as low as 10 V/μm. The origin of this enhancement

UV detectors based on epitaxial diamond films grown on single-crystal diamond substrates by vapor-phase synthesis

International Nuclear Information System (INIS)

Sharonov, G.V.; Petrov, S.A.; Bol'shakov, A.P.; Ral'chenko, V.G.; Kazyuchits, N.M.

2010-01-01

The prospects for use of CVD-technology for epitaxial growth of single-crystal diamond films of instrumental quality in UHF plasma for the production of optoelectronic devices are discussed. A technology for processing diamond single crystals that provides a perfect surface crystal structure with roughness less than 0,5 nm was developed. It was demonstrated that selective UV detectors based on synthetic single-crystal diamond substrates coated with single-crystal films can be produced. A criterion for selecting clean and structurally perfect single crystals of synthetic diamond was developed for the epitaxial growth technology. (authors)

Recent results on CVD diamond radiation sensors

Science.gov (United States)

Weilhammer, P.; Adam, W.; Bauer, C.; Berdermann, E.; Bogani, F.; Borchi, E.; Bruzzi, M.; Colledani, C.; Conway, J.; Dabrowski, W.; Delpierre, P.; Deneuville, A.; Dulinski, W.; v. d. Eijk, R.; van Eijk, B.; Fallou, A.; Fish, D.; Fried, M.; Gan, K. K.; Gheeraert, E.; Grigoriev, E.; Hallewell, G.; Hall-Wilton, R.; Han, S.; Hartjes, F.; Hrubec, J.; Husson, D.; Kagan, H.; Kania, D.; Kaplon, J.; Kass, R.; Knopfle, K. T.; Krammer, M.; Manfredi, P. F.; Meier, D.; LeNormand; Pan, L. S.; Pernegger, H.; Pernicka, M.; Plano, R.; Re, V.; Riester, J. L.; Roe, S.; Roff; Rudge, A.; Schieber, M.; Schnetzer, S.; Sciortino, S.; Speziali, V.; Stelzer, H.; Stone, R.; Tapper, R. J.; Tesarek, R.; Thomson, G. B.; Trawick, M.; Trischuk, W.; Turchetta, R.; RD 42 Collaboration

1998-02-01

CVD diamond radiation sensors are being developed for possible use in trackers in the LHC experiments. The diamond promises to be radiation hard well beyond particle fluences that can be tolerated by Si sensors. Recent results from the RD 42 collaboration on charge collection distance and on radiation hardness of CVD diamond samples will be reported. Measurements with diamond tracking devices, both strip detectors and pixel detectors, will be discussed. Results from beam tests using a diamond strip detector which was read out with fast, 25 ns shaping time, radiation-hard pipeline electronics will be presented.

CVD diamond deposition onto dental burs

International Nuclear Information System (INIS)

Ali, N.; Sein, H.

2001-01-01

A hot-filament chemical vapor deposition (HFCVD) system has been modified to enable non-planar substrates, such as metallic wires and dental burs, to be uniformly coated with thin polycrystalline diamond films. Initially, diamond deposition was carried out on titanium and tantalum wires in order to test and optimize the system. High growth rates of the order of approx. 8 /hr were obtained when depositing diamond on titanium wires using the vertical filament arrangement. However, lower growth rates of the order of 4-5meu m/hr were obtained with diamond deposition on tantalum wires. To extend the work towards a practical biomedical application tungsten carbide dental burs were coated with diamond films. The as-grown films were found to be polycrystalline and uniform over the cutting tip. Finally, the costs relating to diamond CVD onto dental burs have been presented in this paper. The costs relating to coating different number of burs at a time and the effect of film thickness on costs have been included in this investigation. (author)

Panel 2 - properties of diamond and diamond-like-carbon films

Energy Technology Data Exchange (ETDEWEB)

Blau, P.J.; Clausing, R.E. [Oak Ridge National Lab., TN (United States); Ajayi, O.O.; Liu, Y.Y.; Purohit, A. [Argonne National Lab., IL (United States); Bartelt, P.F. [Deere & Co., Moline, IL (United States); Baughman, R.H. [Allied Signal, Morristown, NJ (United States); Bhushan, B. [Ohio State Univ., Columbus (United States); Cooper, C.V. [United Technologies Research Center, East Hartford, CT (United States); Dugger, M.T. [Sandia National Laboratories, Albuquerque, NM (United States); Freedman, A. [Aerodyne Research, Inc., Billerica, MA (United States); Larsen-Basse, J. [National Science Foundation, Washington, DC (United States); McGuire, N.R. [Caterpillar, Peoria, IL (United States); Messier, R.F. [Pennsylvania State Univ., University Park (United States); Noble, G.L.; Ostrowki, M.H. [John Crane, Inc., Morton Grove, IL (United States); Sartwell, B.D. [Naval Research Lab., Washington, DC (United States); Wei, R. [Colorado State Univ., Fort Collins (United States)

1993-01-01

This panel attempted to identify and prioritize research and development needs in determining the physical, mechanical and chemical properties of diamond and diamond-like-carbon films (D/DLCF). Three specific goals were established. They were: (1) To identify problem areas which produce concern and require a better knowledge of D/DLCF properties. (2) To identify and prioritize key properties of D/DLCF to promote transportation applications. (3) To identify needs for improvement in properties-measurement methods. Each of these goals is addressed subsequently.

Drilling of optical glass with electroplated diamond tools

Science.gov (United States)

Wang, A. J.; Luan, C. G.; Yu, A. B.

2010-10-01

K9 optical glass drilling experiments were carried out. Bright nickel electroplated diamond tools with small slots and under heat treatment in different temperature were fabricated. Scan electro microscope was applied to analyze the wear of electroplated diamond tool. The material removal rate and grinding ratio were calculated. Machining quality was observed. Bond coating hardness was measured. The experimental results show that coolant is needed for the drilling processes of optical glasses. Heat treatment temperature of diamond tool has influence on wearability of diamond tool and grinding ratio. There were two wear types of electroplated diamond tool, diamond grit wear and bond wear. With the machining processes, wear of diamond grits included fracture, blunt and pull-out, and electroplated bond was gradually worn out. High material removal rates could be obtained by using diamond tool with suitable slot numbers. Bright nickel coating bond presents smallest grains and has better mechanical properties. Bright nickel electroplated diamond tool with slot structure and heat treatment under 200°C was suitable for optical glass drilling.

Modeling of diamond radiation detectors

International Nuclear Information System (INIS)

Milazzo, L.; Mainwood, A.

2004-01-01

We have built up a computer simulation of the detection mechanism in the diamond radiation detectors. The diamond detectors can be fabricated from a chemical vapour deposition polycrystalline diamond film. In this case, the trapping-detrapping and recombination at the defects inside the grains and at the grain boundaries degrade the transport properties of the material and the charge induction processes. These effects may strongly influence the device's response. Previous simulations of this kind of phenomena in the diamond detectors have generally been restricted to the simple detector geometries and homogeneous distribution of the defects. In our model, the diamond film (diamond detector) is simulated by a grid. We apply a spatial and time discretization, regulated by the grid resolution, to the equations describing the charge transport and, by using the Shockley-Ramo theorem, we calculate the signal induced on the electrodes. In this way, we can simulate the effects of the nonhomogeneous distributions of the trapping, recombination, or scattering centers and can investigate the differences observed when different particles, energies, and electrode configurations are used. The simulation shows that the efficiency of the detector increases linearly with the average grain size, that the charge collection distance is small compared to the dimensions of a single grain, and that for small grains, the trapping at the intragrain defects is insignificant compared to the effect of the grain boundaries

Aplastic anemia in Japanese radiological technicians

International Nuclear Information System (INIS)

Kitabatake, T.; Watanabe, T.; Saito, A.; Nakamura, M.; Shiohama Hospital, Mie

1976-01-01

Among the Japanese radiological technicians, four deaths from aplastic anemia have been reported after 1930. On the other hand, during the period from 1930 to 1960, the population of radiological technicians is estimated to be 74,400 man-years, in which 0.5 aplastic anemias are expected. However, actually three died from aplastic anemia. This difference is statistically significant at the 1% level. While, in the period from 1961 to 1973, the observed value is 1 against 0.7 expected. It is concluded that aplastic anemia had been induced frequently among the Japanese radiological technicians in the era when there was much exposure to occupational radiation. (orig.) [de

D.C. Arcjet Diamond Deposition

Science.gov (United States)

Russell, Derrek Andrew

1995-01-01

Polycrystalline diamond films synthesized by a D.C. (direct current) arcjet device was reported for the first time in 1988. This device is capable of higher diamond growth rates than any other form of diamond CVD (chemical vapor deposition) process due to its inherent versatility with regard to the enthalpy and fluid properties of the diamond-depositing vapor. Unfortunately, the versatility of this type of device is contrasted by many difficulties such as arc stability and large heat fluxes which make applying it toward diamond deposition a difficult problem. The purpose of this work was to convert the dc arcjet, which is primarily a metallurgical device, into a commercially viable diamond CVD process. The project was divided into two parts: process development and diagnostics. The process development effort concentrated on the certain engineering challenges. Among these was a novel arcjet design that allowed the carbon-source gas to be injected downstream of the tungsten cathode while still facilitating mixture with the main gas feed. Another engineering accomplishment was the incorporation of a water -cooled substrate cooler/spinner that maintained the substrate at the proper temperature, provided the substrate with a large thermal time constant to reduce thermal shock of the diamond film, and enabled the system to achieve a four -inch diameter growth area. The process diagnostics effort concentrated on measurements aimed at developing a fundamental understanding of the properties of the plasma jet such as temperature, plasma density, Mach number, pressure at the substrate, etc. The plasma temperature was determined to be 5195 K by measuring the rotational temperature of C _2 via optical emission spectroscopy. The Mach number of the plasma jet was determined to be ~6.0 as determined by the ratio of the stagnation pressures before and after the shock wave in the plasma jet. The C_2 concentration in the plasma jet was determined to be {~10 }^{12} cm^ {-3} by

Diamond films: Historical perspective

Energy Technology Data Exchange (ETDEWEB)

Messier, R. [Pennsylvania State Univ., University Park (United States)

1993-01-01

This section is a compilation of notes and published international articles about the development of methods of depositing diamond films. Vapor deposition articles are included from American, Russian, and Japanese publications. The international competition to develop new deposition methodologies is stressed. The current status of chemical vapor deposition of diamond is assessed.

Comparison of natural and synthetic diamond X-ray detectors.

Science.gov (United States)

Lansley, S P; Betzel, G T; Metcalfe, P; Reinisch, L; Meyer, J

2010-12-01

Diamond detectors are particularly well suited for dosimetry applications in radiotherapy for reasons including near-tissue equivalence and high-spatial resolution resulting from small sensitive volumes. However, these detectors have not become commonplace due to high cost and poor availability arising from the need for high-quality diamond. We have fabricated relatively cheap detectors from commercially-available synthetic diamond fabricated using chemical vapour deposition. Here, we present a comparison of one of these detectors with the only commercially-available diamond-based detector (which uses a natural diamond crystal). Parameters such as the energy dependence and linearity of charge with dose were investigated at orthovoltage energies (50-250 kV), and dose-rate dependence of charge at linear accelerator energy (6 MV). The energy dependence of a synthetic diamond detector was similar to that of the natural diamond detector, albeit with slightly less variation across the energy range. Both detectors displayed a linear response with dose (at 100 kV) over the limited dose range used. The sensitivity of the synthetic diamond detector was 302 nC/Gy, compared to 294 nC/Gy measured for the natural diamond detector; however, this was obtained with a bias of 246.50 V compared to a bias of 61.75 V used for the natural diamond detector. The natural diamond detector exhibited a greater dependency on dose-rate than the synthetic diamond detector. Overall, the synthetic diamond detector performed well in comparison to the natural diamond detector.

The incidence of gastrointestinal pathology and subsequent anemia in young men presenting with iron deficiency without anemia.

Science.gov (United States)

Carter, Dan; Bardan, Eytan; Derazne, Estela; Tzur, Dorit; Avidan, Benjamin

2016-10-01

The etiology of iron deficiency (ID) without anemia in young men is unclear, and there are no evidence-based recommendations for the required gastrointestinal (GI) evaluation. The aims of this study were to examine the incidence of significant GI pathology and the development of anemia during the follow-up of young men presenting with ID, but without anemia. All young men (18-30 years) who served in the Israel Defense Forces during the years 2005-2013 and had at least a single laboratory test indicative of ID without anemia were followed until the diagnosis of significant GI pathology or discharge from military service. The study population included 2061 young men (mean age 20.7±1.8). During follow-up of 3150 person years, significant GI pathologies were diagnosed in 39 patients: inflammatory bowel disease in 25 (1.2%), celiac disease in 8 (0.4%), and peptic disease in 4 (0.1%). No cases of GI-related cancer were diagnosed. ID anemia developed during follow-up in 203 (9.8%). Lower baseline hemoglobin levels, lower ferritin levels, and younger age at diagnosis were more common among those who developed anemia. The development of anemia was a predisposing factor for the diagnosis of GI pathology (risk ratio=3.60, 95% confidence interval 1.34-8.32, P=0.012). Significant GI pathology is very uncommon in young men presenting with ID. Overt anemia developed in close to 10% of the study cohort. Therefore, we advise simple GI evaluation (celiac serology, C-reactive protein or fecal calprotectin, and urease breath test) as well as follow-up in this population.

Toroidal plasma enhanced CVD of diamond films

International Nuclear Information System (INIS)

Zvanya, John; Cullen, Christopher; Morris, Thomas; Krchnavek, Robert R.; Holber, William; Basnett, Andrew; Basnett, Robert; Hettinger, Jeffrey

2014-01-01

An inductively coupled toroidal plasma source is used as an alternative to microwave plasmas for chemical vapor deposition of diamond films. The source, operating at a frequency of 400 kHz, synthesizes diamond films from a mixture of argon, methane, and hydrogen. The toroidal design has been adapted to create a highly efficient environment for diamond film deposition: high gas temperature and a short distance from the sample to the plasma core. Using a toroidal plasma geometry operating in the medium frequency band allows for efficient (≈90%) coupling of AC line power to the plasma and a scalable path to high-power and large-area operation. In test runs, the source generates a high flux of atomic hydrogen over a large area, which is favorable for diamond film growth. Using a deposition temperature of 900–1050 °C and a source to sample distance of 0.1–2.0 cm, diamond films are deposited onto silicon substrates. The results showed that the deposition rate of the diamond films could be controlled using the sample temperature and source to sample spacing. The results also show the films exhibit good-quality polycrystalline diamond as verified by Raman spectroscopy, x-ray diffraction, and scanning electron microscopy. The scanning electron microscopy and x-ray diffraction results show that the samples exhibit diamond (111) and diamond (022) crystallites. The Raman results show that the sp 3 peak has a narrow spectral width (FWHM 12 ± 0.5 cm −1 ) and that negligible amounts of the sp 2 band are present, indicating good-quality diamond films

Diamond particle detectors systems in high energy physics

CERN Document Server

Gan, Kock Kiam

2015-01-01

The measurement of luminosity at the Large Hadron Collider (LHC) using diamond detect or s has matured from devices based on a rather large pads to highly granular pixelated device s . The ATLAS experiment has recently installed a diamond pixel detector, the Diamond Beam Monitor (DBM), to measure the luminosity in the upgraded LHC with higher instantaneous luminosity. Polycrystalline diamonds were used to fabricate the diamond pixel modules. The design , production, and test beam result s are described. CMS also has a similar plan to construct a diamond based luminosity monitor, the Pixel Luminos ity Telescope s (PLT) . In a pilot run using single crystal diamond, the pulse height was found to depend on the luminosity . Consequently the collaboration decided to use silicon instead due to time constrain ts .

Biofunctionalization of diamond microelectrodes

Energy Technology Data Exchange (ETDEWEB)

Reitinger, Andreas Adam; Lud, Simon Quartus; Stutzmann, Martin; Garrido, Jose Antonio [Walter Schottky Institut, TU Muenchen (Germany); Hutter, Naima Aurelia; Richter, Gerhard; Jordan, Rainer [WACKER-Chair of Macromolecular Chemistry, TU Muenchen (Germany)

2010-07-01

In this work we present two main routes for the biofunctionalization of nanocrystalline diamond films, aiming at the application of diamond microelectrodes as amperometric biosensors. We report on direct covalent grafting of biomolecules on nanocrystalline diamond films via diazonium monophenyls and biphenyls as well as other linker molecules, forming self-assembled monolayers on the diamond surface. Monolayers with different functional head groups have been characterized. Patterning of the available functional groups using electron beam-induced chemical lithography allows the selective preparation of well-localized docking sites for the immobilization of biomolecules. Furthermore, polymer brushes are expected to enable novel paths for designing more advanced biosensing schemes, incorporating multifunctional groups and a higher loading capacity for biomolecules. Here, we focus on the preparation of polymer grafts by self-initiated photografting and photopolymerization. Further chemical modification of the grafted polymer brushes results in the introduction of additional functional molecules, paving the way for the incorporation of more complex molecular structures such as proteins. In a comparative study we investigate the advantages and disadvantages of both approaches.

Study on the Effect of Diamond Grain Size on Wear of Polycrystalline Diamond Compact Cutter

Science.gov (United States)

Abdul-Rani, A. M.; Che Sidid, Adib Akmal Bin; Adzis, Azri Hamim Ab

2018-03-01

Drilling operation is one of the most crucial step in oil and gas industry as it proves the availability of oil and gas under the ground. Polycrystalline Diamond Compact (PDC) bit is a type of bit which is gaining popularity due to its high Rate of Penetration (ROP). However, PDC bit can easily wear off especially when drilling hard rock. The purpose of this study is to identify the relationship between the grain sizes of the diamond and wear rate of the PDC cutter using simulation-based study with FEA software (ABAQUS). The wear rates of a PDC cutter with a different diamond grain sizes were calculated from simulated cuttings of cutters against granite. The result of this study shows that the smaller the diamond grain size, the higher the wear resistivity of PDC cutter.

Boron doped diamond electrode for the wastewater treatment

International Nuclear Information System (INIS)

Quiroz Alfaro, Marco Antonio; Ferro, Sergio; Martinez-Huitle, Carlos Alberto; Vong, Yunny Meas

2006-01-01

Electrochemical studies of diamond were started more than fifteen years ago with the first paper on diamond electrochemistry published by Pleskov. After that, work started in Japan, United States of America, France, Switzerland and other countries. Over the last few years, the number of publications has increased considerably. Diamond films have been the subject of applications and fundamental research in electrochemistry, opening up a new branch known as the electrochemistry of diamond electrodes. Here, we first present a brief history and the process of diamond film synthesis. The principal objective of this work is to summarize the most important results in the electrochemical oxidation using diamond electrodes. (author)

Optimizing biosensing properties on undecylenic Acid-functionalized diamond.

Science.gov (United States)

Zhong, Yu Lin; Chong, Kwok Feng; May, Paul W; Chen, Zhi-Kuan; Loh, Kian Ping

2007-05-08

The optimization of biosensing efficiency on a diamond platform depends on the successful coupling of biomolecules on the surface, and also on effective signal transduction in the biorecognition events. In terms of biofunctionalization of diamond surfaces, surface electrochemical studies of diamond modified with undecylenic acid (UA), with and without headgroup protection, were performed. The direct photochemical coupling method employing UA was found to impart a higher density of carboxylic acid groups on the diamond surface compared to that using trifluoroethyl undecenoate (TFEU) as the protecting group during the coupling process. Non-faradic impedimetric DNA sensing revealed that lightly doped diamond gives better signal transduction sensitivity compared to highly doped diamond.

Boron doped diamond electrode for the wastewater treatment

Directory of Open Access Journals (Sweden)

Alfaro Marco Antonio Quiroz

2006-01-01

Full Text Available Electrochemical studies of diamond were started more than fifteen years ago with the first paper on diamond electrochemistry published by Pleskov. After that, work started in Japan, United States of America, France, Switzerland and other countries. Over the last few years, the number of publications has increased considerably. Diamond films have been the subject of applications and fundamental research in electrochemistry, opening up a new branch known as the electrochemistry of diamond electrodes. Here, we first present a brief history and the process of diamond film synthesis. The principal objective of this work is to summarize the most important results in the electrochemical oxidation using diamond electrodes.

The Evidence-Based Evaluation of Iron Deficiency Anemia.

Science.gov (United States)

Hempel, Eliana V; Bollard, Edward R

2016-09-01

Anemia is a prevalent disease with multiple possible etiologies and resultant complications. Iron deficiency anemia is a common cause of anemia and is typically due to insufficient intake, poor absorption, or overt or occult blood loss. Distinguishing iron deficiency from other causes of anemia is integral to initiating the appropriate treatment. In addition, identifying the underlying cause of iron deficiency is also necessary to help guide management of these patients. We review the key components to an evidence-based, cost-conscious evaluation of suspected iron deficiency anemia. Copyright © 2016 Elsevier Inc. All rights reserved.

Detection and analysis of diamond fingerprinting feature and its application

Energy Technology Data Exchange (ETDEWEB)

Li Xin; Huang Guoliang; Li Qiang; Chen Shengyi, E-mail: tshgl@tsinghua.edu.cn [Department of Biomedical Engineering, the School of Medicine, Tsinghua University, Beijing, 100084 (China)

2011-01-01

Before becoming a jewelry diamonds need to be carved artistically with some special geometric features as the structure of the polyhedron. There are subtle differences in the structure of this polyhedron in each diamond. With the spatial frequency spectrum analysis of diamond surface structure, we can obtain the diamond fingerprint information which represents the 'Diamond ID' and has good specificity. Based on the optical Fourier Transform spatial spectrum analysis, the fingerprinting identification of surface structure of diamond in spatial frequency domain was studied in this paper. We constructed both the completely coherent diamond fingerprinting detection system illuminated by laser and the partially coherent diamond fingerprinting detection system illuminated by led, and analyzed the effect of the coherence of light source to the diamond fingerprinting feature. We studied rotation invariance and translation invariance of the diamond fingerprinting and verified the feasibility of real-time and accurate identification of diamond fingerprint. With the profit of this work, we can provide customs, jewelers and consumers with a real-time and reliable diamonds identification instrument, which will curb diamond smuggling, theft and other crimes, and ensure the healthy development of the diamond industry.

Engineering NV centres in Synthetic Diamond

International Nuclear Information System (INIS)

Matthew Markham

2014-01-01

The quantum properties of the nitrogen vacancy (NV) centre in diamond has prompted rapid growth in diamond research. This initial growth was driven by the fact the NV centre provides an 'easy' to manipulate quantum system along with opening up the possibility of a new material to deliver a solid state quantum computer. The NV defect is now moving from a quantum curiosity to a commercial development platform for a range of application such as as gyroscopes, timing and magnetometry as well as the more traditional quantum technologies such as quantum encryption and quantum simulation. These technologies are pushing the development needs of the material, and the processing of that material. The paper will describes the advances in CVD diamond synthesis with special attention to getting NV defects close to the surface of the diamond and how to process the material for diamond quantum optical applications. (author)

Short-range order in irradiated diamonds

International Nuclear Information System (INIS)

Agafonov, S.S.; Glazkov, V.P.; Nikolaenko, V.A.; Somenkov, V.A.

2005-01-01

Structural changes in irradiated diamond with a change in its density were studied. Natural diamond powders with average particle size from 14-20 μm to 0.5 mm, irradiated in beryllium block of the MR reactor up to a fluence of 1.51 x 10 21 were used as samples. Using the neutron-diffraction method, it has been established that, when density in irradiated diamonds varies, a transition from a diamond-like amorphous structure to a graphite-like structure occurs. The transition occurs at a density ρ ∼ 2.7-2.9 g/cm 3 and is accompanied by a sharp change in resistivity [ru

Vertically aligned nanowires from boron-doped diamond.

Science.gov (United States)

Yang, Nianjun; Uetsuka, Hiroshi; Osawa, Eiji; Nebel, Christoph E

2008-11-01

Vertically aligned diamond nanowires with controlled geometrical properties like length and distance between wires were fabricated by use of nanodiamond particles as a hard mask and by use of reactive ion etching. The surface structure, electronic properties, and electrochemical functionalization of diamond nanowires were characterized by atomic force microscopy (AFM) and scanning tunneling microscopy (STM) as well as electrochemical techniques. AFM and STM experiments show that diamond nanowire etched for 10 s have wire-typed structures with 3-10 nm in length and with typically 11 nm spacing in between. The electrode active area of diamond nanowires is enhanced by a factor of 2. The functionalization of nanowire tips with nitrophenyl molecules is characterized by STM on clean and on nitrophenyl molecule-modified diamond nanowires. Tip-modified diamond nanowires are promising with respect to biosensor applications where controlled biomolecule bonding is required to improve chemical stability and sensing significantly.

Prospects for the synthesis of large single-crystal diamonds

International Nuclear Information System (INIS)

Khmelnitskiy, R A

2015-01-01

The unique properties of diamond have stimulated the study of and search for its applications in many fields, including optics, optoelectronics, electronics, biology, and electrochemistry. Whereas chemical vapor deposition allows the growth of polycrystalline diamond plates more than 200 mm in diameter, most current diamond application technologies require large-size (25 mm and more) single-crystal diamond substrates or films suitable for the photolithography process. This is quite a challenge, because the largest diamond crystals currently available are 10 mm or less in size. This review examines three promising approaches to fabricating large-size diamond single crystals: growing large-size single crystals, the deposition of heteroepitaxial diamond films on single-crystal substrates, and the preparation of composite diamond substrates. (reviews of topical problems)

Mechanical pretreatment for improved adhesion of diamond coatings

International Nuclear Information System (INIS)

Toenshoff, H.K.; Mohlfeld, A.; Gey, C.; Winkler, J.

1999-01-01

Diamond coatings are mainly used in cutting processes due to their tribological characteristics. They show a high hardness, low friction coefficient, high wear resistance and good chemical inertness. In relation to polycrystalline diamond (PCD)-tipped cutting inserts, especially the advantageous chemical stability of diamond coatings is superior as no binder phases between diamond grains are used. However, the deposition of adherent high-quality diamond coatings has been found difficult. Thus, substrate pretreatment is utilised to improve film adhesion. This investigation is based on water peening of the substrate material before coating. The investigation revealed best results for diamond film adhesion on pretreated substrates compared to conventional diamond coatings on cemented carbide tools applied with the CVD hot-filament process. In final cutting tests with increased film adhesion trough water peened cutting tools an improved wear behavior was detected. (orig.)

Anemia

Science.gov (United States)

... a hemoglobin value of less than 13.5 gm/dl in a man or less than 12.0 gm/dl in a woman. Normal values for children ... types of anemia cannot be prevented, eating healthy foods can help you avoid both iron-and vitamin- ...

Anemia em adolescentes segundo maturação sexual Anemia among adolescents according to sexual maturation

Directory of Open Access Journals (Sweden)

Bianca Assunção Iuliano

2004-03-01

Full Text Available OBJETIVO: Verificar a prevalência de anemia em adolescentes (hemoglobina0,05. Observou-se aparente aumento do nível médio de hemoglobina com o desenvolvimento do adolescente. Detectou-se anemia em 11,0% dos adolescentes, a maioria na fase púbere, classificada como ''prevalência leve'' segundo a World Health Organization. Não foi encontrada associação entre indicadores sociais e anemia. CONCLUSÃO: O estudo apontou baixa prevalência de anemia, mas acima do esperado entre púberes de escola particular e indica tendência de aumento dos níveis de hemoglobina com o desenvolvimento sexual dos adolescentes. Devem ser realizados novos estudos de prevalência de anemia para se determinar sua causa entre adolescentes de diferentes níveis socioeconômicos.OBJECTIVE: To assess the prevalence of anemia (hemoglobin level <12g/dL in adolescents, according to their sexual maturation stage. METHODS: A cross-sectional study was conducted with all adolescents enrolled in 5th - 8th grades in a private school in the city of São Paulo. Their hemoglobin level was measured (using Hemocue® and sexual development was self-evaluated (with the aid of pictures of the maturation stages proposed by Tanner. The social indicators evaluated were the per capita family income and maternal schooling. Student t test and non-parametric Kruskal-Wallis test were used for mean comparison and Chi-square-test for associations (p<0.05. RESULTS: We analyzed 118 students, of which 66.9% were females (aged 12.2±1.13 years and 33.1% were males (aged 12.0±1.18 years. The mean hemoglobin level was 13.2±1.08 g/dL for females and 13.3±1.21 g/dL for males, with no significant difference. An apparent increase in the mean hemoglobin level was verified along with sexual development of the adolescents. Anemia was detected in 11% of them, most in the pubertal stage, which is classified by the World Health Organization as ''mild prevalence''. No association was found between social

CVD diamond for nuclear detection applications

International Nuclear Information System (INIS)

Bergonzo, P.; Brambilla, A.; Tromson, D.; Mer, C.; Guizard, B.; Marshall, R.D.; Foulon, F.

2002-01-01

Chemically vapour deposited (CVD) diamond is a remarkable material for the fabrication of radiation detectors. In fact, there exist several applications where other standard semiconductor detectors do not fulfil the specific requirements imposed by corrosive, hot and/or high radiation dose environments. The improvement of the electronic properties of CVD diamond has been under intensive investigations and led to the development of a few applications that are addressing specific industrial needs. Here, we report on CVD diamond-based detector developments and we describe how this material, even though of a polycrystalline nature, is readily of great interest for applications in the nuclear industry as well as for physics experiments. Improvements in the material synthesis as well as on device fabrication especially concern the synthesis of films that do not exhibit space charge build up effects which are often encountered in CVD diamond materials and that are highly detrimental for detection devices. On a pre-industrial basis, CVD diamond detectors have been fabricated for nuclear industry applications in hostile environments. Such devices can operate in harsh environments and overcome limitations encountered with the standard semiconductor materials. Of these, this paper presents devices for the monitoring of the alpha activity in corrosive nuclear waste solutions, such as those encountered in nuclear fuel assembly reprocessing facilities, as well as diamond-based thermal neutron detectors exhibiting a high neutron to gamma selectivity. All these demonstrate the effectiveness of a demanding industrial need that relies on the remarkable resilience of CVD diamond

Management of Anemia of Inflammation in the Elderly

Directory of Open Access Journals (Sweden)

Antonio Macciò

2012-01-01

Full Text Available Anemia of any degree is recognized as a significant independent contributor to morbidity, mortality, and frailty in elderly patients. Among the broad types of anemia in the elderly a peculiar role seems to be played by the anemia associated with chronic inflammation, which remains the most complex form of anemia to treat. The origin of this nonspecific inflammation in the elderly has not yet been clarified. It seems more plausible that the oxidative stress that accompanies ageing is the real cause of chronic inflammation of the elderly and that the same oxidative stress is actually a major cause of this anemia. The erythropoietic agents have the potential to play a therapeutic role in this patient population. Despite some promising results, rHuEPO does not have a specific indication for the treatment of anemia in the elderly. Moreover, concerns about their side effects have spurred the search for alternatives. Considering the etiopathogenetic mechanisms of anemia of inflammation in the elderly population, an integrated nutritional/dietetic approach with nutraceuticals that can manipulate oxidative stress and related inflammation may prevent the onset of this anemia and its negative impact on patients’ performance and quality of life.

Management of Anemia of Inflammation in the Elderly

Science.gov (United States)

Macciò, Antonio; Madeddu, Clelia

2012-01-01

Anemia of any degree is recognized as a significant independent contributor to morbidity, mortality, and frailty in elderly patients. Among the broad types of anemia in the elderly a peculiar role seems to be played by the anemia associated with chronic inflammation, which remains the most complex form of anemia to treat. The origin of this nonspecific inflammation in the elderly has not yet been clarified. It seems more plausible that the oxidative stress that accompanies ageing is the real cause of chronic inflammation of the elderly and that the same oxidative stress is actually a major cause of this anemia. The erythropoietic agents have the potential to play a therapeutic role in this patient population. Despite some promising results, rHuEPO does not have a specific indication for the treatment of anemia in the elderly. Moreover, concerns about their side effects have spurred the search for alternatives. Considering the etiopathogenetic mechanisms of anemia of inflammation in the elderly population, an integrated nutritional/dietetic approach with nutraceuticals that can manipulate oxidative stress and related inflammation may prevent the onset of this anemia and its negative impact on patients' performance and quality of life. PMID:23091709

Socio-economic and demographic determinants of childhood anemia

Directory of Open Access Journals (Sweden)

Sankar Goswmai

2015-10-01

Full Text Available ABSTRACT OBJECTIVE: To evaluate socio-economic and demographic determinants of anemia among Indian children aged 6-59 months. METHODS: Statistical analysis was performed on the cross-sectional weighted sample of 40,885 children from 2005 to 2006 National Family Health Survey by using multinomial logistic regression to assess the significance of some risk factors in different degrees of child anemia. Anemia was diagnosed by World Health Organization (WHO cut-off points on hemoglobin level. Pearson's chi-squared test was applied to justify the associations of anemia with different categories of the study population. RESULTS: The prevalence of anemia was 69.5%; 26.2% mild, 40.4% moderate, and 2.9% severe anemia. Overall prevalence rate, along with mild and moderate cases, showed an increasing trend up to 2 years of age and then decreased. Rural children had a higher prevalence rate. Of 28 Indian states in the study, 10 states showed very high prevalence, the highest being Bihar (77.9%. Higher birth order, high index of poverty, low level of maternal education, mother's anemia, non-intake of iron supplements during pregnancy, and vegetarian mother increased the risks of all types of anemia among children (p < 0.05. Christian population was at lower risk; and Scheduled Caste, Scheduled Tribe, and Other Backward Class categories were at higher risk of anemia. CONCLUSION: The results suggest a need for proper planning and implementation of preventive measures to combat child anemia. Economically under-privileged groups, maternal nutrition and education, and birth control measures should be priorities in the programs.

Management of Iron Deficiency Anemia

Science.gov (United States)

Jimenez, Kristine; Kulnigg-Dabsch, Stefanie

2015-01-01

Anemia affects one-fourth of the world’s population, and iron deficiency is the predominant cause. Anemia is associated with chronic fatigue, impaired cognitive function, and diminished well-being. Patients with iron deficiency anemia of unknown etiology are frequently referred to a gastroenterologist because in the majority of cases the condition has a gastrointestinal origin. Proper management improves quality of life, alleviates the symptoms of iron deficiency, and reduces the need for blood transfusions. Treatment options include oral and intravenous iron therapy; however, the efficacy of oral iron is limited in certain gastrointestinal conditions, such as inflammatory bowel disease, celiac disease, and autoimmune gastritis. This article provides a critical summary of the diagnosis and treatment of iron deficiency anemia. In addition, it includes a management algorithm that can help the clinician determine which patients are in need of further gastrointestinal evaluation. This facilitates the identification and treatment of the underlying condition and avoids the unnecessary use of invasive methods and their associated risks. PMID:27099596

Diamond carbon sources: a comparison of carbon isotope models

International Nuclear Information System (INIS)

Kirkley, M.B.; Otter, M.L.; Gurney, J.J.; Hill, S.J.

1990-01-01

The carbon isotope compositions of approximately 500 inclusion-bearing diamonds have been determined in the past decade. 98 percent of these diamonds readily fall into two broad categories on the basis of their inclusion mineralogies and compositions. These categories are peridotitic diamonds and eclogitic diamonds. Most peridotitic diamonds have δ 13 C values between -10 and -1 permil, whereas eclogitic diamonds have δ 13 C values between -28 and +2 permil. Peridotitic diamonds may represent primordial carbon, however, it is proposed that initially inhomogeneous δ 13 C values were subsequently homogenized, e.g. during melting and convection that is postulated to have occurred during the first billion years of the earth's existence. If this is the case, then the wider range of δ 13 C values exhibited by eclogitic diamonds requires a different explanation. Both the fractionation model and the subduction model can account for the range of observed δ 13 C values in eclogitic diamonds. 16 refs., 2 figs

Unexpected Anemia and Reticulocytopenia in an Adolescent With Sickle Cell Anemia Receiving Chronic Transfusion Therapy.

Science.gov (United States)

Blauel, Emily R; Grossmann, Lily T; Vissa, Madhav; Miller, Scott T

2015-10-01

In a patient with sickle cell disease receiving chronic transfusion, exacerbation of anemia with reticulocytopenia must prompt consideration of a delayed hemolytic transfusion reaction with hyperhemolysis, as further transfusion may worsen this condition; definitive diagnosis is sometimes difficult. Anemia evolving during parvovirus B19-induced erythroid hypoplasia (transient aplastic crisis) should be attenuated in chronic transfusion patients due to superior survival of transfused over endogenous red blood cells. A 16-year-old with sickle cell disease receiving chronic transfusion of modified intensity (goal to maintain hemoglobin S<50%) who developed symptomatic anemia with reticulocytopenia was later shown to have had transient aplastic crisis.

Nanostructured Diamond Device for Biomedical Applications.

Science.gov (United States)

Fijalkowski, M; Karczemska, A; Lysko, J M; Zybala, R; KozaneckI, M; Filipczak, P; Ralchenko, V; Walock, M; Stanishevsky, A; Mitura, S

2015-02-01

Diamond is increasingly used in biomedical applications because of its unique properties such as the highest thermal conductivity, good optical properties, high electrical breakdown voltage as well as excellent biocompatibility and chemical resistance. Diamond has also been introduced as an excellent substrate to make the functional microchip structures for electrophoresis, which is the most popular separation technique for the determination of analytes. In this investigation, a diamond electrophoretic chip was manufactured by a replica method using a silicon mold. A polycrystalline 300 micron-thick diamond layer was grown by the microwave plasma-assisted CVD (MPCVD) technique onto a patterned silicon substrate followed by the removal of the substrate. The geometry of microstructure, chemical composition, thermal and optical properties of the resulting free-standing diamond electrophoretic microchip structure were examined by CLSM, SFE, UV-Vis, Raman, XRD and X-ray Photoelectron Spectroscopy, and by a modified laser flash method for thermal property measurements.

Genetics Home Reference: thiamine-responsive megaloblastic anemia syndrome

Science.gov (United States)

... Thiamine-responsive megaloblastic anemia syndrome Thiamine-responsive megaloblastic anemia syndrome Printable PDF Open All Close All Enable ... the expand/collapse boxes. Description Thiamine-responsive megaloblastic anemia syndrome is a rare condition characterized by hearing ...

Genesis of diamond inclusions: An integrated cathodoluminescence (CL) and Electron backscatter diffraction (EBSD) study on eclogitic and peridotitic inclusions and their diamond host.

Science.gov (United States)

van den Heuvel, Quint; Matveev, Sergei; Drury, Martyn; Gress, Michael; Chinn, Ingrid; Davies, Gareth

2017-04-01

Diamond inclusions are potentially fundamental to understanding the formation conditions of diamond and the volatile cycles in the deep mantle. In order to fully understand the implications of the compositional information recorded by inclusions it is vital to know whether the inclusions are proto-, syn-, or epigenetic and the extent to which they have equilibrated with diamond forming fluids. In previous studies, the widespread assumption was made that the majority of diamond inclusions are syngenetic, based upon observation of cubo-octahedral morphology imposed on the inclusions. Recent work has reported the crystallographic relationship between inclusions and the host diamond to be highly complex and the lack of crystallographic relationships between inclusions and diamonds has led some to question the significance of imposed cubo-octahedral morphology. This study presents an integrated EBSD and CL study of 9 diamonds containing 20 pyropes, 2 diopsides, 1 forsterite and 1 rutile from the Jwaneng and Letlhakane kimberlite clusters, Botswana. A new method was developed to analyze the crystallographic orientation of the host diamond and the inclusions with EBSD. Diamonds plates were sequentially polished to expose inclusions at different levels in the diamond. CL imaging at different depths was performed in order to produce a 3D view of diamond growth zones around the inclusions. Standard diamond polishing techniques proved too aggressive for silicate inclusions as they were damaged to such a degree that EBSD measurements on the inclusions were impossible. The inclusions were milled with a Ga+ focused ion beam (FIB) at a 12° angle to clean the surface for EBSD measurements. Of the 24 inclusions, 9 have an imposed cubo-octahedral morphology. Of these inclusions, 6 have faces orientated parallel to diamond growth zones and/or appear to have nucleated on a diamond growth surface, implying syngenesis. In contrast, other diamonds record resorption events such that

CVD diamond detectors and dosimeters

International Nuclear Information System (INIS)

Manfredotti, C.; Fizzotti, F.; LoGiudice, A.; Paolini, C.; Oliviero, P.; Vittone, E.; Torino Univ., Torino

2002-01-01

Natural diamond, because of its well-known properties of tissue-equivalence, has recorded a wide spreading use in radiotherapy planning with electron linear accelerators. Artificial diamond dosimeters, as obtained by Chemical Vapour Deposition (CVD) could be capable to offer the same performances and they can be prepared in different volumes and shapes. The dosimeter sensitivity per unit volume may be easily proved to be better than standard ionization microchamber. We have prepared in our laboratory CVD diamond microchamber (diamond tips) in emispherical shape with an external diameter of 200 μm, which can be used both as X-ray beam profilometers and as microdosimeters for small field applications like stereotaxy and also for in vivo applications. These dosimeters, which are obtained on a wire substrate that could be either metallic or SiC or even graphite, display good performances also as ion or synchrotron X-rays detectors

9 CFR 311.34 - Anemia.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Anemia. 311.34 Section 311.34 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION... CERTIFICATION DISPOSAL OF DISEASED OR OTHERWISE ADULTERATED CARCASSES AND PARTS § 311.34 Anemia. Carcasses of...

Family structure and child anemia in Mexico.

Science.gov (United States)

Schmeer, Kammi K

2013-10-01

Utilizing longitudinal data from the nationally-representative Mexico Family Life Survey, this study assesses the association between family structure and iron-deficient anemia among children ages 3-12 in Mexico. The longitudinal models (n = 4649), which control for baseline anemia status and allow for consideration of family structure transitions, suggest that children living in stable-cohabiting and single-mother families and those who have recently experienced a parental union dissolution have higher odds of anemia than those in stable-married, father-present family structures. Interaction effects indicate that unmarried family contexts have stronger associations with anemia in older children (over age five); and, that the negative effects of parental union dissolution are exacerbated in poorer households. Resident maternal grandparents have a significant beneficial effect on child anemia independent of parental family structure. These results highlight the importance of family structure for child micronutrient deficiencies and suggest that understanding social processes within households may be critical to preventing child anemia in Mexico. Copyright © 2012 Elsevier Ltd. All rights reserved.

Diamond sensors for future high energy experiments

Energy Technology Data Exchange (ETDEWEB)

Bachmair, Felix, E-mail: bachmair@phys.ethz.ch

2016-09-21

With the planned upgrade of the LHC to High-Luminosity-LHC [1], the general purpose experiments ATLAS and CMS are planning to upgrade their innermost tracking layers with more radiation tolerant technologies. Chemical Vapor Deposition CVD diamond is one such technology. CVD diamond sensors are an established technology as beam condition monitors in the highest radiation areas of all LHC experiments. The RD42-collaboration at CERN is leading the effort to use CVD diamond as a material for tracking detectors operating in extreme radiation environments. An overview of the latest developments from RD42 is presented including the present status of diamond sensor production, a study of pulse height dependencies on incident particle flux and the development of 3D diamond sensors.

Diamond based adsorbents and their application in chromatography.

Science.gov (United States)

Peristyy, Anton A; Fedyanina, Olga N; Paull, Brett; Nesterenko, Pavel N

2014-08-29

The idea of using diamond and diamond containing materials in separation sciences has attracted a strong interest in the past decade. The combination of a unique range of properties, such as chemical inertness, mechanical, thermal and hydrolytic stability, excellent thermal conductivity with minimal thermal expansion and intriguing adsorption properties makes diamond a promising material for use in various modes of chromatography. This review summarises the recent research on the preparation of diamond and diamond based stationary phases, their properties and chromatographic performance. Special attention is devoted to the dominant retention mechanisms evident for particular diamond containing phases, and their subsequent applicability to various modes of chromatography, including chromatography carried out under conditions of high temperature and pressure. Copyright © 2014 Elsevier B.V. All rights reserved.

Tissue Factor and Thrombin in Sickle Cell Anemia

OpenAIRE

Chantrathammachart, Pichika; Pawlinski, Rafal

2012-01-01

Sickle cell anemia is an inherited hematologic disorder associated with hemolytic and vaso-occlusive complications. An activation of coagulation is also a prominent feature of sickle cell anemia. Growing evidence indicates that coagulation may contribute to the inflammation and vascular injury in sickle cell anemia. This review focuses on tissue factor expression and its contribution to the activation of coagulation, thrombosis and vascular inflammation in sickle cell anemia.

Iron Deficiency, Anemia and Mortality in Renal Transplant Recipients

NARCIS (Netherlands)

Eisenga, Michele F.; Minovic, Isidor; Berger, Stefan P.; Kootstra-Ros, Jenny E.; van den Berg, Else; Riphagen, Ineke J.; Navis, Gerjan; van der Meer, Peter; Bakker, Stephan J. L.; Gaillard, Carlo A. J. M.

Anemia, iron deficiency anemia (IDA), and iron deficiency (ID) are highly prevalent in renal transplant recipients (RTR). Anemia is associated with poor outcome, but the role of ID is unknown. Therefore, we aimed to investigate the association of ID, irrespective of anemia, with all-cause mortality

Iron Deficiency, Anemia and Mortality in Renal Transplant Recipients

NARCIS (Netherlands)

Eisenga, Michele F.; Minovic, Isidor; Berger, Stefan P; Kootstra-Ros, Jenny E.; van den Berg, Else; Riphagen, Ineke J.; Navis, Gerjan J.; Van der Meer, Peter; Bakker, Stephan J. L.; Gaillard, Carlo A. J. M.

2016-01-01

Anemia, iron deficiency anemia (IDA), and iron deficiency (ID) are highly prevalent in renal transplant recipients (RTR). Anemia is associated with poor outcome, but the role of ID is unknown. Therefore, we aimed to investigate the association of ID, irrespective of anemia, with all-cause mortality

Surface temperature measurements of diamond

CSIR Research Space (South Africa)

Masina, BN

2006-07-01

Full Text Available Diamond has the highest thermal conductivity among known materials, and as such finds uses as an industrial tool in areas where dissipation of excess heat is a requirement. In this investigation we set up a laser system to heat a diamond sample...

Response of CVD diamond detectors to alpha radiation

Energy Technology Data Exchange (ETDEWEB)

Souw, E.-K. [Brookhaven National Lab., Upton, NY (United States); Meilunas, R.J. [Northrop-Grumman Corporation, Bethpage, NY 11714-3582 (United States)

1997-11-21

This article describes some results from an experiment with CVD diamond films used as {alpha} particle detectors. It demonstrates that bulk polarization can be effectively stopped within a reasonable time interval. This will enable detector calibration and quantitative measurement. A possible mechanism for the observed polarization quenching is discussed. It involves two types of carrier traps and a tentative band-gap model derived from the results of photoconductive current measurements. The experiment was set up mainly to investigate {alpha} detection properties of polycrystalline diamond films grown by the technique of microwave plasma enhanced chemical vapor deposition. For comparison, two commercially purchased diamond wafers were also investigated, i.e., one grown by the DC arc jet method, and the other, a type-IIa natural diamond wafer (not preselected). The best response to {alpha} particles was obtained using diamond thin-films grown by the microwave PECVD method, followed by the type-IIa natural diamond, and finally, the CVD diamond grown by the DC arc jet technique. (orig.). 43 refs.

Anemia in Mexican women: results of two national probabilistic surveys Anemia en mujeres mexicanas: resultados de dos encuestas nacionales probabilísticas

Directory of Open Access Journals (Sweden)

Teresa Shamah-Levy

2009-01-01

Full Text Available OBJECTIVE: To describe the prevalence of anemia in Mexican women and analyze its trends with information from the last two national nutrition surveys. MATERIAL AND METHODS: The prevalence of anemia in women was analyzed. Anemia was adjusted by socioeconomic profile and by potentially explanatory variables. RESULTS: The overall prevalence of anemia for pregnant women was 20.2% (95% CI 15.9, 26.2% and 15.5% for non-pregnant women (95% CI 14.7, 16.4%. The prevalence of anemia in women decreased from 1999 to 2006 in all socioeconomic profiles. Adolescent women living in the northern and in the southern regions had a greater risk of anemia than those in Mexico City (p= 0.05. Significant risk was found among low socioeconomic level (pOBJETIVO: Describir la prevalencia de anemia en mujeres y analizar su tendencia a través de las dos últimas encuestas nacionales de nutrición. MATERIAL Y MÉTODOS: Se analizó la prevalencia de anemia en mujeres. La prevalencia de anemia se ajustó por perfil socioeconómico y por posibles variables que la expliquen. RESULTADOS: La prevalencia global de anemia fue de 20.2% (IC95% 15.9, 26.2% para mujeres embarazadas y de 15.5% (IC95% 14.7, 16.4% para mujeres no embarazadas. La prevalencia de anemia en mujeres disminuyó de 1999 a 2006 en todos los niveles socioeconómicos. Las mujeres adolescentes que viven en las regiones norte y sur tuvieron mayor riesgo de anemia que las que viven en la Ciudad de México (p= 0.05. Se encontró un riesgo significativo asociado con el nivel socioeconómico bajo (p< 0.06. La mayor paridad resultó ser un factor de riesgo significativo (p< 0.05. CONCLUSIONES: Aun cuando la presencia de anemia en mujeres en edad reproductiva en México ha disminuido, continúa siendo un problema de salud pública.

Organophosphonate biofunctionalization of diamond electrodes.

Science.gov (United States)

Caterino, R; Csiki, R; Wiesinger, M; Sachsenhauser, M; Stutzmann, M; Garrido, J A; Cattani-Scholz, A; Speranza, Giorgio; Janssens, S D; Haenen, K

2014-08-27

The modification of the diamond surface with organic molecules is a crucial aspect to be considered for any bioapplication of this material. There is great interest in broadening the range of linker molecules that can be covalently bound to the diamond surface. In the case of protein immobilization, the hydropathicity of the surface has a major influence on the protein conformation and, thus, on the functionality of proteins immobilized at surfaces. For electrochemical applications, particular attention has to be devoted to avoid that the charge transfer between the electrode and the redox center embedded in the protein is hindered by a thick insulating linker layer. This paper reports on the grafting of 6-phosphonohexanoic acid on OH-terminated diamond surfaces, serving as linkers to tether electroactive proteins onto diamond surfaces. X-ray photoelectron spectroscopy (XPS) confirms the formation of a stable layer on the surface. The charge transfer between electroactive molecules and the substrate is studied by electrochemical characterization of the redox activity of aminomethylferrocene and cytochrome c covalently bound to the substrate through this linker. Our work demonstrates that OH-terminated diamond functionalized with 6-phosphonohexanoic acid is a suitable platform to interface redox-proteins, which are fundamental building blocks for many bioelectronics applications.

Conductive diamond electrodes for water purification

Directory of Open Access Journals (Sweden)

Carlos Alberto Martínez-Huitle

2007-12-01

Full Text Available Nowadays, synthetic diamond has been studied for its application in wastewater treatment, electroanalysis, organic synthesis and sensor areas; however, its use in the water disinfection/purification is its most relevant application. The new electrochemistry applications of diamond electrodes open new perspectives for an easy, effective, and chemical free water treatment. This article highlights and summarizes the results of a selection of papers dealing with electrochemical disinfection using synthetic diamond films.

Polycrystalline Diamond Schottky Diodes and Their Applications.

Science.gov (United States)

Zhao, Ganming

In this work, four-hot-filament CVD techniques for in situ boron doped diamond synthesis on silicon substrates were extensively studied. A novel tungsten filament shape and arrangement used to obtain large-area, uniform, boron doped polycrystalline diamond thin films. Both the experimental results and radiative heat transfer analysis showed that this technique improved the uniformity of the substrate temperature. XRD, Raman and SEM studies indicate that large area, uniform, high quality polycrystalline diamond films were obtained. Schottky diodes were fabricated by either sputter deposition of silver or thermal evaporation of aluminum or gold, on boron doped diamond thin films. High forward current density and a high forward-to-reverse current ratio were exhibited by silver on diamond Schottky diodes. Schottky barrier heights and the majority carrier concentrations of both aluminum and gold contacted diodes were determined from the C-V measurements. Furthermore, a novel theoretical C-V-f analysis of deep level boron doped diamond Schottky diodes was performed. The analytical results agree well with the experimental results. Compressive stress was found to have a large effect on the forward biased I-V characteristics of the diamond Schottky diodes, whereas the effect on the reverse biased characteristics was relatively small. The stress effect on the forward biased diamond Schottky diode was attributed to piezojunction and piezoresistance effects. The measured force sensitivity of the diode was as high as 0.75 V/N at 1 mA forward bias. This result shows that CVD diamond device has potential for mechanical transducer applications. The quantitative photoresponse characteristics of the diodes were studied in the spectral range of 300 -1050 nm. Semi-transparent gold contacts were used for better photoresponse. Quantum efficiency as high as 50% was obtained at 500 nm, when a reverse bias of over 1 volt was applied. The Schottky barrier heights between either gold or

Multidisciplinary approach to anemia

Directory of Open Access Journals (Sweden)

Anca Ghiațău

2015-08-01

Full Text Available Introduction: We present the case of a 65 years- old woman who was admitted with a severe macrocytic anemia Hb= 5.7g/dl and diffuse bone pain. Biologically she has moderate thrombocytopenia 35 000/µl, a hepatic cytolysis and cholestatic syndrome. Material and method: The patient was extensively evaluated before presentation for a mild iron - deficiency anemia for which she underwent endoscopic examination of the upper and lower gastrointestinal tract- normal. The bone marrow aspiration on admission revealed a marked hyperplasia of the erythroblastic line with ~50% basophilic erythroblasts suggesting a regenerative erythroid hyperplasia. These changes along with the marked reticulocytosis on the peripheral blood smear oriented us towards a hemolytic anemia; Folic acid, vitamin B12, autoimmune tests and hemolytic tests were all normal. We continued the investigations with a thoraco-abdominopelvic computed tomography which identified diffuse demineralization, vertebral compactation and pelvic stress fractures. The breast examination revealed a right breast nodule, but the breast ultrasonography pleaded for benignity. Lacking a clear definitive diagnosis we decided to perform a bone marrow biopsy. Results: The osteo- medullary biopsy pointed towards a medullar invasion from a lobular mammary carcinoma; In these circumstances we performed an ultrasound guided biopsy of the right mammary lump thus histologically confirming a tumoral invasion of the bone marrow with subsequent anemia. The patient started chemotherapy in the Oncology ward. Conclusion: The particularity of this case consists in the pattern of anemia, which initially seemed iron deficient and afterwards macrocytic – apparently hemolytic and was actually due to the tumoral medullar invasion and also the nonspecific ultrasonographic appearance of the breast tumor.

Factors Associated with Anemia in the Institutionalized Elderly.

Directory of Open Access Journals (Sweden)

Emanuelle Cruz da Silva

Full Text Available As a common problem in long-term care facilities (LTCFs, anemia affects 25-63% of the elderly. The aim of the present study was to describe the prevalence and characteristics of anemia and its associated factors in the institutionalized elderly. The cross-sectional study was carried out with three hundred thirteen individuals aged ≥ 60 years, of both genders, living in long-term care facilities for the elderly in Salvador, Bahia, Brazil. Poisson regression (PR with robust variance estimates was used to assess the factors related to anemia. The prevalence of anemia was 38%. Mild anemia was predominant in both genders (male: 26.8%; female: 21.1%, as normocytic and normochromic anemia, with no anisocytosis (69.75%. Anemia was associated with thinness (PR: 1.68; 95% CI: 1.04-2.72 and with moderate (PR: 1.98; 95% CI: 1.07-3.63 and total (PR: 2.61; 95% CI: 1.34-5.07 dependence in the final model. Severe dependence exhibited borderline significance (PR: 1.94; 95% CI: 1.00-3.77. The prevalence of anemia was high in the institutionalized elderly in both genders, with characteristics suggesting chronic diseases as the causal factor, and the frequency of occurrence was higher in thinness elderly with moderate to total dependence.

Diamond MEMS: wafer scale processing, devices, and technology insertion

Science.gov (United States)

Carlisle, J. A.

2009-05-01

Diamond has long held the promise of revolutionary new devices: impervious chemical barriers, smooth and reliable microscopic machines, and tough mechanical tools. Yet it's been an outsider. Laboratories have been effectively growing diamond crystals for at least 25 years, but the jump to market viability has always been blocked by the expense of diamond production and inability to integrate with other materials. Advances in chemical vapor deposition (CVD) processes have given rise to a hierarchy of carbon films ranging from diamond-like carbon (DLC) to vapor-deposited diamond coatings, however. All have pros and cons based on structure and cost, but they all share some of diamond's heralded attributes. The best performer, in theory, is the purest form of diamond film possible, one absent of graphitic phases. Such a material would capture the extreme hardness, high Young's modulus and chemical inertness of natural diamond. Advanced Diamond Technologies Inc., Romeoville, Ill., is the first company to develop a distinct chemical process to create a marketable phase-pure diamond film. The material, called UNCD® (for ultrananocrystalline diamond), features grain sizes from 3 to 300 nm in size, and layers just 1 to 2 microns thick. With significant advantages over other thin films, UNCD is designed to be inexpensive enough for use in atomic force microscopy (AFM) probes, microelectromechanical machines (MEMS), cell phone circuitry, radio frequency devices, and even biosensors.

Novel diamond-coated tools for dental drilling applications.

Science.gov (United States)

Jackson, M J; Sein, H; Ahmed, W; Woodwards, R

2007-01-01

The application of diamond coatings on cemented tungsten carbide (WC-Co) tools has been the subject of much attention in recent years in order to improve cutting performance and tool life in orthodontic applications. WC-Co tools containing 6% Co metal and 94% WC substrate with an average grain size of 1 - 3 microm were used in this study. In order to improve the adhesion between diamond and WC substrates it is necessary to etch cobalt from the surface and prepare it for subsequent diamond growth. Alternatively, a titanium nitride (TiN) interlayer can be used prior to diamond deposition. Hot filament chemical vapour deposition (HFCVD) with a modified vertical filament arrangement has been employed for the deposition of diamond films to TiN and etched WC substrates. Diamond film quality and purity has been characterized using scanning electron microscopy (SEM) and micro Raman spectroscopy. The performances of diamond-coated WC-Co tools, uncoated WC-Co tools, and diamond embedded (sintered) tools have been compared by drilling a series of holes into various materials such as human tooth, borosilicate glass, and acrylic tooth materials. Flank wear has been used to assess the wear rates of the tools when machining biomedical materials such as those described above. It is shown that using an interlayer such as TiN prior to diamond deposition provides the best surface preparation for producing dental tools.

Genetics Home Reference: congenital dyserythropoietic anemia

Science.gov (United States)

... Facebook Twitter Home Health Conditions CDA Congenital dyserythropoietic anemia Printable PDF Open All Close All Enable Javascript ... view the expand/collapse boxes. Description Congenital dyserythropoietic anemia ( CDA ) is an inherited blood disorder that affects ...

FastStats: Anemia or Iron Deficiency

Science.gov (United States)

... this? Submit What's this? Submit Button NCHS Home Anemia or Iron Deficiency Recommend on Facebook Tweet Share ... visits Number of visits to emergency departments with anemia as the primary hospital discharge diagnosis: 188,000 ...

Treatment of anemia with darbepoetin alfa in systolic heart failure

DEFF Research Database (Denmark)

Swedberg, Karl; Young, James B; Anand, Inder S

2013-01-01

Patients with systolic heart failure and anemia have worse symptoms, functional capacity, and outcomes than those without anemia. We evaluated the effects of darbepoetin alfa on clinical outcomes in patients with systolic heart failure and anemia.......Patients with systolic heart failure and anemia have worse symptoms, functional capacity, and outcomes than those without anemia. We evaluated the effects of darbepoetin alfa on clinical outcomes in patients with systolic heart failure and anemia....

Application of CVD diamond film for radiation detection

International Nuclear Information System (INIS)

Zhou Haiyang; Zhu Xiaodong; Zhan Rujuan

2005-01-01

With the development of diamond synthesis at low pressure, the CVD diamond properties including electronic characteristics have improved continuously. Now the fabrication of electronic devices based on the CVD diamond has been one of hot research subjects in this field. Due to many unique advantages, such as high signal-noise ratio, fast time response, and normal output in extremely harsh surrounding, the CVD diamond radiation detector has attracted more and more interest. In this paper, we have reviewed the development and status of the CVD diamond radiation detector. The prospect of this detector is described. (authors)

High-pressure-high-temperature treatment of natural diamonds

CERN Document Server

Royen, J V

2002-01-01

The results are reported of high-pressure-high-temperature (HPHT) treatment experiments on natural diamonds of different origins and with different impurity contents. The diamonds are annealed in a temperature range up to 2000 sup o C at stabilizing pressures up to 7 GPa. The evolution is studied of different defects in the diamond crystal lattice. The influence of substitutional nitrogen atoms, plastic deformation and the combination of these is discussed. Diamonds are characterized at room and liquid nitrogen temperature using UV-visible spectrophotometry, Fourier transform infrared spectrophotometry and photoluminescence spectrometry. The economic implications of diamond HPHT treatments are discussed.

Prevalence and Correlates of Maternal Anemia in Rural Sidama ...

African Journals Online (AJOL)

In order to assess the prevalence and correlates of prenatal anemia, a survey was conducted among 700 randomly selected pregnant women in rural Sidama, Southern Ethiopia. The prevalences of anemia, Iron Deficiency (ID) and ID anemia were 31.6%, 17.4% and 8.7%, respectively. The burden of anemia was ...

Correction of anemia in pregnancy

Directory of Open Access Journals (Sweden)

Analía Cánepa

2015-11-01

Se observó que en el 50% de las pacientes estudiadas no se logró corregir la anemia. Concluimos que existe una dificultad en la corrección de la anemia y una necesidad de realizar futuros estudios que permitan conocer las causas de este problema e implementar acciones en base a ellas.

Recent Advances in Diamond Detectors

CERN Document Server

Trischuk, W.

2008-01-01

With the commissioning of the LHC expected in 2009, and the LHC upgrades expected in 2012, ATLAS and CMS are planning for detector upgrades for their innermost layers requiring radiation hard technologies. Chemical Vapor Deposition (CVD) diamond has been used extensively in beam conditions monitors as the innermost detectors in the highest radiation areas of BaBar, Belle and CDF and is now planned for all LHC experiments. This material is now being considered as an alternate sensor for use very close to the interaction region of the super LHC where the most extreme radiation conditions will exist. Recently the RD42 collaboration constructed, irradiated and tested polycrystalline and single-crystal chemical vapor deposition diamond sensors to the highest fluences available. We present beam test results of chemical vapor deposition diamond up to fluences of 1.8 x 10^16 protons/cm^2 showing that both polycrystalline and single-crystal chemical vapor deposition diamonds follow a single damage curve allowing one t...

CLINICO PATHOLOGICAL STUDY OF PATTERNS OF ANEMIA DURING PREGNANCY

Directory of Open Access Journals (Sweden)

Chamakuri

2015-10-01

Full Text Available INTRODUCTION: Anemia is defined as haemoglobin level in the blood below the lower extreme of the normal range for the age and sex of the individual. According to WHO, in developing countries the prevalence of anemia among pregnant women averages 60%, ranging between 35 to 100% among different regions of the world. A hemoglobin concentration below 11.0g/dl or packed cell volume (PCV of less than 33.0% is regarded as anemia during pregnancy by the WHO. It occurs in 40 - 80% of the pregnant women. Iron and folic acid defici encies, malaria, intestinal parasitic infections and hemoglobinopathies are the principal causes of anemia in pregnancy. Predisposing factors include young age, grand multiparity, low socioeconomic status, illiteracy, ignorance and short intervals of pregn ancy. AIM AND OBJECTIVES: 1. To study various patterns of anemia in pregnant women having haemoglobin level < 11 gm%. 2. To determine the most common pattern of anemia in pregnancy based on red cell morphology. MATERIALS AND METHODS: This study is a prospe ctive study over a period of one year from September 2014 to August 2015 in the department of pathology, Andhra medical college, Visakhapatnam . The study was conducted on 120 pregnant women whose haemoglobin level is < 11 gm/dl. All the haemotological parameters & peripheral blood smear stained by Leishman’s stain were evaluated. Complete clinical & obstetric history was recorded. Socioeconomic status was also noted. RESULTS: Out of 120 cases of anemia, we found 47 patie nts (39.1% having dimorphic anemia, 36(30% – microcytic hypochromic anemia, 23(19.1% - normocytic hypochromic anemia, 11(9.16% - sickle cell anemia and 1(0.83% case of pancytopenia. Maximum cases were seen in the age group of 21 - 30 years. 52 cases (43. 3% were primigravida and remaining 68 cases (56.6% were gravida two to four. 20 cases (16.6% were diagnosed in the first trimester, 38 cases (31.6% in the second trimester & 62 cases (51.6s% in the

Single-Crystal Diamond Nanobeam Waveguide Optomechanics

Science.gov (United States)

Khanaliloo, Behzad; Jayakumar, Harishankar; Hryciw, Aaron C.; Lake, David P.; Kaviani, Hamidreza; Barclay, Paul E.

2015-10-01

Single-crystal diamond optomechanical devices have the potential to enable fundamental studies and technologies coupling mechanical vibrations to both light and electronic quantum systems. Here, we demonstrate a single-crystal diamond optomechanical system and show that it allows excitation of diamond mechanical resonances into self-oscillations with amplitude >200 nm . The resulting internal stress field is predicted to allow driving of electron spin transitions of diamond nitrogen-vacancy centers. The mechanical resonances have a quality factor >7 ×105 and can be tuned via nonlinear frequency renormalization, while the optomechanical interface has a 150 nm bandwidth and 9.5 fm /√{Hz } sensitivity. In combination, these features make this system a promising platform for interfacing light, nanomechanics, and electron spins.

Modified diamond dies for laser applications

Energy Technology Data Exchange (ETDEWEB)

McWilliams, R.A.

1978-06-21

A modified wire drawing die for spatial filtering techniques is described. It was designed for use in high power laser systems. The diamond aperture is capable of enduring high intensity laser frequency without damaging the laser beam profile. The diamond is mounted at the beam focus in a vacuum of 1 x 10/sup -5/ Torr. The vacuum prevents plasma forming at the diamond aperture, thus enabling the beam to pass through without damaging the holder or aperture. The spatial filters are fitted with a manipulator that has three electronic stepping motors, can position the aperture in three orthogonal directions, and is capable of 3.2 ..mu..m resolution. Shiva laser system is using 105 diamond apertures for shaping the High Energy Laser Beam.

Correlative study on anemia and radiotherapy effects in nasopharyngeal carcinoma

International Nuclear Information System (INIS)

Chen Jinsheng; Jiang Yuanshi; Cao Xibiao; Zhan Yongzhong; Yang Liye; Chen Jianxiu; Chen Chengwu; Li Yang

2003-01-01

Objective: To study the effect of oxygen-carrying ability of blood efficacy of radiotherapy for patients with nasopharyngeal carcinoma. Methods: Altogether 161 cases of patients with nasopharyngeal carcinoma were classified according to severity of anemia, and Hb, RBC, MCH, HCT, MCV, MCHC and RDW were tested before, during and after radiotherapy. The patients were followed-up for up to 5 years, the relationship and mechanism among anemia, radiotherapy effects and survival rate was discussed. Results: The survival rate between anemia group and non-anemia group was different significantly (P<0.05). Anemia before radiotherapy, anemia appearance or anemia deterioration during radiotherapy were sensitive factors affecting radiotherapy results. The anemia more severe, the radiotherapy worse. Conclusion: Anemia-hypohemoglobinemia leads to decrease of oxygen-carrying capacity of blood, resulting in oxygen deficiency of tumor cells and their radiotherapy resistance. Therefore this method is worthy of further studies

Aplastic anemia due to radiation

International Nuclear Information System (INIS)

Sakai, Kunio; Saito, Akira

1978-01-01

The relationship between radiation exposure and aplastic anemia, clarified previously, is discussed. When persons such as radiological technicians receive whole-body irradiation in rather large doses, it is possible that aplastic anemia will result later on. However, this is difficult to determine because the irradiated region is limited despite large doses of radiation. (Bell, E.)

First principles calculation of lithium-phosphorus co-doped diamond

Directory of Open Access Journals (Sweden)

Q.Y. Shao

2013-03-01

Full Text Available We calculate the density of states (DOS and the Mulliken population of the diamond and the co-doped diamonds with different concentrations of lithium (Li and phosphorus (P by the method of the density functional theory, and analyze the bonding situations of the Li-P co-doped diamond thin films and the impacts of the Li-P co-doping on the diamond conductivities. The results show that the Li-P atoms can promote the split of the diamond energy band near the Fermi level, and improve the electron conductivities of the Li-P co-doped diamond thin films, or even make the Li-P co-doped diamond from semiconductor to conductor. The affection of Li-P co-doping concentration on the orbital charge distributions, bond lengths and bond populations is analyzed. The Li atom may promote the split of the energy band near the Fermi level and also may favorably regulate the diamond lattice distortion and expansion caused by the P atom.

Prevalence of Anemia in Latin America and the Caribbean.

Science.gov (United States)

Mujica-Coopman, María F; Brito, Alex; López de Romaña, Daniel; Ríos-Castillo, Israel; Coris, Héctor; Olivares, Manuel

2015-06-01

In Latin America and the Caribbean, anemia has been a public health problem that affects mainly women of childbearing age and children under 6 years of age. However, the current prevalence of anemia in this region is unknown. To examine the latest available prevalence data on anemia in Latin America and the Caribbean. A systematic review was conducted in 2011 and updated in 2014. Studies determining the prevalence of anemia conducted in apparently healthy populations with national or regional representativeness were included in the review. The lowest prevalence rates of anemia among children under 6 years of age were found in Chile (4.0%), Costa Rica (4.0%), Argentina (7.6%), and Mexico (19.9%). In Nicaragua, Brazil, Ecuador, El Panama, and Honduras, anemia was a moderate public health problem, with prevalence ranging Salvador, Cuba, Colombia, the Dominican Republic, Peru, from 20.1% to 37.3%. Anemia was a severe public health problem in Guatemala, Haiti, and Bolivia. The prevalence of anemia among women of childbearing age was lowest in Chile (5.1%). In Colombia, El Salvador, Costa Rica, Nicaragua, Ecuador, Mexico, Peru, Honduras, and Argentina, anemia was a mild public health problem, with prevalence ranging from 7.6% to 18.7%. In Guatemala, Brazil, the Dominican Republic, and Bolivia, anemia was a moderate public health problem, with prevalence ranging from 21.4% to 38.3%. Panama and Haiti had the highest reported prevalence rates (40.0% and 45.5%, respectively), and anemia was considered a severe public health problem in those countries. Anemia remains a public health problem in children under 6 years of age and women of childbearing age in most Latin America and Caribbean countries for which data are available.

Comparison of natural and synthetic diamond X-ray detectors

International Nuclear Information System (INIS)

Lansley, S. P.; Betzel, G.T.; Meyer, J.; Metcalf, P.; Reinisch, L.

2010-01-01

Full text: Diamond detectors are particularly well suited for dosimetry applications in radiotherapy for reasons including near-tissue equivalence and high-spatial resolu tion resulting from small sensitive volumes. However, these detectors have not become commonplace due to high cost and poor availability arising from the need for high quality diamond. We have fabricated relatively cheap detectors from commercially-available synthetic diamond fabricated using chemical vapour deposition. Here, we present a comparison of one of these detectors with the only commercially-available diamond-based detector (which uses a natural diamond crystal). Parameters such as the energy dependence and linearity of charge with dose were investigated at orthovoltage energies (50-250 kY), and dose-rate dependence of charge at linear accelerator energy (6 MY). The energy dependence of a synthetic diamond detector was similar to that of the natural diamond detector, albeit with slightly less variation across the energy range. Both detectors displayed a linear response S. P. Lansley () . G. T. Betzel . J. Meyer Department of Physics and Astronomy, University of Canterbury, Christchurch, New Zealand e-mail: stuart.lansley canterbury.ac.nz S. P. Lansley The Macdiarmid Institute for Advanced Materials and Nanotechnology, University of Canterbury, Christchurch, New Zealand P. Metcalfe Centre for Medical Radiation Physics, University of Wollongong, Wollongong, Australia L. Reinisch Department of Physical and Earth Sciences, Jacksonville State University, Jacksonville, AL, USA with dose (at 100 kY) over the limited dose range used. The sensitivity of the synthetic diamond detector was 302 nC/Gy, compared to 294 nC/Gy measured for the natural diamond detector; however, this was obtained with a bias of 246.50 Y compared to a bias of 61.75 Y used for the natural diamond detector. The natural diamond detector exhibited a greater dependency on dose-rate than the syn thetic diamond detector. Overall

Investigation of laser ablation of CVD diamond film

Science.gov (United States)

Chao, Choung-Lii; Chou, W. C.; Ma, Kung-Jen; Chen, Ta-Tung; Liu, Y. M.; Kuo, Y. S.; Chen, Ying-Tung

2005-04-01

Diamond, having many advanced physical and mechanical properties, is one of the most important materials used in the mechanical, telecommunication and optoelectronic industry. However, high hardness value and extreme brittleness have made diamond extremely difficult to be machined by conventional mechanical grinding and polishing. In the present study, the microwave CVD method was employed to produce epitaxial diamond films on silicon single crystal. Laser ablation experiments were then conducted on the obtained diamond films. The underlying material removal mechanisms, microstructure of the machined surface and related machining conditions were also investigated. It was found that during the laser ablation, peaks of the diamond grains were removed mainly by the photo-thermal effects introduced by excimer laser. The diamond structures of the protruded diamond grains were transformed by the laser photonic energy into graphite, amorphous diamond and amorphous carbon which were removed by the subsequent laser shots. As the protruding peaks gradually removed from the surface the removal rate decreased. Surface roughness (Ra) was improved from above 1μm to around 0.1μm in few minutes time in this study. However, a scanning technique would be required if a large area was to be polished by laser and, as a consequence, it could be very time consuming.

Twinning of cubic diamond explains reported nanodiamond polymorphs

Science.gov (United States)

Németh, Péter; Garvie, Laurence A. J.; Buseck, Peter R.

2015-12-01

The unusual physical properties and formation conditions attributed to h-, i-, m-, and n-nanodiamond polymorphs has resulted in their receiving much attention in the materials and planetary science literature. Their identification is based on diffraction features that are absent in ordinary cubic (c-) diamond (space group: Fd-3m). We show, using ultra-high-resolution transmission electron microscope (HRTEM) images of natural and synthetic nanodiamonds, that the diffraction features attributed to the reported polymorphs are consistent with c-diamond containing abundant defects. Combinations of {113} reflection and rotation twins produce HRTEM images and d-spacings that match those attributed to h-, i-, and m-diamond. The diagnostic features of n-diamond in TEM images can arise from thickness effects of c-diamonds. Our data and interpretations strongly suggest that the reported nanodiamond polymorphs are in fact twinned c-diamond. We also report a new type of twin ( rotational), which can give rise to grains with dodecagonal symmetry. Our results show that twins are widespread in diamond nanocrystals. A high density of twins could strongly influence their applications.

Twinning of cubic diamond explains reported nanodiamond polymorphs.

Science.gov (United States)

Németh, Péter; Garvie, Laurence A J; Buseck, Peter R

2015-12-16

The unusual physical properties and formation conditions attributed to h-, i-, m-, and n-nanodiamond polymorphs has resulted in their receiving much attention in the materials and planetary science literature. Their identification is based on diffraction features that are absent in ordinary cubic (c-) diamond (space group: Fd-3m). We show, using ultra-high-resolution transmission electron microscope (HRTEM) images of natural and synthetic nanodiamonds, that the diffraction features attributed to the reported polymorphs are consistent with c-diamond containing abundant defects. Combinations of {113} reflection and rotation twins produce HRTEM images and d-spacings that match those attributed to h-, i-, and m-diamond. The diagnostic features of n-diamond in TEM images can arise from thickness effects of c-diamonds. Our data and interpretations strongly suggest that the reported nanodiamond polymorphs are in fact twinned c-diamond. We also report a new type of twin ( rotational), which can give rise to grains with dodecagonal symmetry. Our results show that twins are widespread in diamond nanocrystals. A high density of twins could strongly influence their applications.

CVD diamond metallization and characterization

Energy Technology Data Exchange (ETDEWEB)

Fraimovitch, D., E-mail: dimitryf@mail.tau.ac.il [Faculty of Engineering, Tel Aviv University, 69978 Tel Aviv (Israel); Adelberd, A.; Marunko, S. [Faculty of Engineering, Tel Aviv University, 69978 Tel Aviv (Israel); Lefeuvre, G. [Micron Semiconductor Ltd. Royal Buildings, Marlborough Road, Lancing Business Park, BN15 8SJ (United Kingdom); Ruzin, A. [Faculty of Engineering, Tel Aviv University, 69978 Tel Aviv (Israel)

2017-02-11

In this study we compared three diamond substrate grades: polycrystalline, optical grade single crystal, and electronic grade single crystal for detector application. Beside the bulk type, the choice of contact material, pre-treatment, and sputtering process details have shown to alter significantly the diamond detector performance. Characterization of diamond substrate permittivity and losses indicate grade and crystallinity related, characteristic differences for frequencies in 1 kHz–1 MHz range. Substantial grade related variations were also observed in surface electrostatic characterization performed by contact potential difference (CPD) mode of an atomic force microscope. Study of conductivity variations with temperature reveal that bulk trap energy levels are also dependent on the crystal grade.

CVD diamond metallization and characterization

International Nuclear Information System (INIS)

Fraimovitch, D.; Adelberd, A.; Marunko, S.; Lefeuvre, G.; Ruzin, A.

2017-01-01

In this study we compared three diamond substrate grades: polycrystalline, optical grade single crystal, and electronic grade single crystal for detector application. Beside the bulk type, the choice of contact material, pre-treatment, and sputtering process details have shown to alter significantly the diamond detector performance. Characterization of diamond substrate permittivity and losses indicate grade and crystallinity related, characteristic differences for frequencies in 1 kHz–1 MHz range. Substantial grade related variations were also observed in surface electrostatic characterization performed by contact potential difference (CPD) mode of an atomic force microscope. Study of conductivity variations with temperature reveal that bulk trap energy levels are also dependent on the crystal grade.

Tailoring nanocrystalline diamond coated on titanium for osteoblast adhesion.

Science.gov (United States)

Pareta, Rajesh; Yang, Lei; Kothari, Abhishek; Sirinrath, Sirivisoot; Xiao, Xingcheng; Sheldon, Brian W; Webster, Thomas J

2010-10-01

Diamond coatings with superior chemical stability, antiwear, and cytocompatibility properties have been considered for lengthening the lifetime of metallic orthopedic implants for over a decade. In this study, an attempt to tailor the surface properties of diamond films on titanium to promote osteoblast (bone forming cell) adhesion was reported. The surface properties investigated here included the size of diamond surface features, topography, wettability, and surface chemistry, all of which were controlled during microwave plasma enhanced chemical-vapor-deposition (MPCVD) processes using CH4-Ar-H2 gas mixtures. The hardness and elastic modulus of the diamond films were also determined. H2 concentration in the plasma was altered to control the crystallinity, grain size, and topography of the diamond coatings, and specific plasma gases (O2 and NH3) were introduced to change the surface chemistry of the diamond coatings. To understand the impact of the altered surface properties on osteoblast responses, cell adhesion tests were performed on the various diamond-coated titanium. The results revealed that nanocrystalline diamond (grain sizes diamond and, thus, should be further studied for improving orthopedic applications. Copyright 2010 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2010.

Prevalence of high blood pressure, heart disease, thalassemia, sickle-cell anemia, and iron-deficiency anemia among the UAE adolescent population.

Science.gov (United States)

Barakat-Haddad, Caroline

2013-01-01

This study examined the prevalence of high blood pressure, heart disease, and medical diagnoses in relation to blood disorders, among 6,329 adolescent students (age 15 to 18 years) who reside in the United Arab Emirates (UAE). Findings indicated that the overall prevalence of high blood pressure and heart disease was 1.8% and 1.3%, respectively. Overall, the prevalence for thalassemia, sickle-cell anemia, and iron-deficiency anemia was 0.9%, 1.6%, and 5%, respectively. Bivariate analysis revealed statistically significant differences in the prevalence of high blood pressure among the local and expatriate adolescent population in the Emirate of Sharjah. Similarly, statistically significant differences in the prevalence of iron-deficiency anemia were observed among the local and expatriate population in Abu Dhabi city, the western region of Abu Dhabi, and Al-Ain. Multivariate analysis revealed the following significant predictors of high blood pressure: residing in proximity to industry, nonconventional substance abuse, and age when smoking or exposure to smoking began. Ethnicity was a significant predictor of heart disease, thalassemia, sickle-cell anemia, and iron-deficiency anemia. In addition, predictors of thalassemia included gender (female) and participating in physical activity. Participants diagnosed with sickle-cell anemia and iron-deficiency anemia were more likely to experience different physical activities.

Anemia as a risk factor for childhood asthma

Directory of Open Access Journals (Sweden)

Ramakrishnan K

2010-01-01

Full Text Available Objective: This prospective-(cohort study was conducted to evaluate whether anemia is a risk factor for childhood asthma. Materials and Methods: Two hundred children in the age group of 2-18 years who attended the Outpatient Department with upper respiratory / lower respiratory tract infections were included in this study. One hundred children with anemia were taken as the study group and another 100, age - and sex-matched children without anemia were taken as the control.They were subjected to complete blood count (CBC C-reactive protein (CRP estimation, Mantoux test and chest X-ray. Pulmonary function tests (PFTs were performed on those above six years showing evidence of asthma. Peripheral smear, serum ferritin and serum iron-binding capacity were estimated for all anemic children. Results: Asthma was present in 74 (74% children in the study group and in 33 (33% children in the control group. Iron-deficiency anemia was present in 85 (85% anemia of chronic infection in 20 (20% and the other five (5% had hemolytic anemia. Anemia was found to be a risk factor for childhood asthma. Conclusion: Anemic children were 5.75 times more susceptible to asthmatic attacks when compared with nonanemic children.

Protrusio acetabuli in sickle-cell anemia

International Nuclear Information System (INIS)

Martinez, S.; Apple, J.S.; Baber, C.; Putman, C.E.; Rosse, W.F.

1984-01-01

Of 155 adults with sickle-cell anemia (SS, SC), radiographs of the pelvis or hip demonstrated protrusio acetabuli on at least one side in 14 (3 men and 11 women), as indicated by projection of the acetabular line medial to the ilio-ischial line. All 14 patients had bone changes attributable to sickle-cell anemia, including marrow hyperplasia and osteonecrosis; however, the severity of femoral or acetabular osteonecrosis did not appear directly related to the protrusion. The authors conclude that sickle-cell anemia can predispose to development of protrusio acetabuli

Single-Crystal Diamond Nanobeam Waveguide Optomechanics

Directory of Open Access Journals (Sweden)

Behzad Khanaliloo

2015-12-01

Full Text Available Single-crystal diamond optomechanical devices have the potential to enable fundamental studies and technologies coupling mechanical vibrations to both light and electronic quantum systems. Here, we demonstrate a single-crystal diamond optomechanical system and show that it allows excitation of diamond mechanical resonances into self-oscillations with amplitude >200  nm. The resulting internal stress field is predicted to allow driving of electron spin transitions of diamond nitrogen-vacancy centers. The mechanical resonances have a quality factor >7×10^{5} and can be tuned via nonlinear frequency renormalization, while the optomechanical interface has a 150 nm bandwidth and 9.5  fm/sqrt[Hz] sensitivity. In combination, these features make this system a promising platform for interfacing light, nanomechanics, and electron spins.

Graphitization of diamond with a metallic coating on ferritic matrix

International Nuclear Information System (INIS)

Cabral, Stenio Cavalier; Oliveira, Hellen Cristine Prata de; Filgueira, Marcello

2010-01-01

Iron is a strong catalyst of graphitization of diamonds. This graphitization occurs mainly during the processing of composites - conventional sintering or hot pressing, and during cutting operations. Aiming to avoid or minimize this deleterious effect, there is increasing use of diamond coated with metallic materials in the production of diamond tools processed via powder metallurgy. This work studies the influence of Fe on diamond graphitization diamond-coated Ti after mixing of Fe-diamonds, hot pressing parameters were performed with 3 minutes/35MPa/900 deg C - this is the condition of pressing hot used in industry for production of diamond tools. Microstructural features were observed by SEM, diffusion of Fe in diamond was studied by EDS. Graphitization was analyzed by X-ray diffraction and Raman spectroscopy. It was found that Fe not activate graphitization on the diamond under the conditions of hot pressing. (author)

Magnitude of Anemia at Discharge Increases 30-Day Hospital Readmissions.

Science.gov (United States)

Koch, Colleen G; Li, Liang; Sun, Zhiyuan; Hixson, Eric D; Tang, Anne; Chagin, Kevin; Kattan, Michael; Phillips, Shannon C; Blackstone, Eugene H; Henderson, J Michael

2017-12-01

Anemia during hospitalization is associated with poor health outcomes. Does anemia at discharge place patients at risk for hospital readmission within 30 days of discharge? Our objectives were to examine the prevalence and magnitude of anemia at hospital discharge and determine whether anemia at discharge was associated with 30-day readmissions among a cohort of hospitalizations in a single health care system. From January 1, 2009, to August 31, 2011, there were 152,757 eligible hospitalizations within a single health care system. The endpoint was any hospitalization within 30 days of discharge. The University HealthSystem Consortium's clinical database was used for demographics and comorbidities; hemoglobin values are from the hospitals' electronic medical records, and readmission status was obtained from the University HealthSystem Consortium administrative data systems. Mild anemia was defined as hemoglobin of greater than 11 to less than 12 g/dl in women and greater than 11 to less than 13 g/dl in men; moderate, greater than 9 to less than or equal to 11 g/dl; and severe, less than or equal to 9 g/dl. Logistic regression was used to assess the association of anemia and 30-day readmissions adjusted for demographics, comorbidity, and hospitalization type. Among 152,757 hospitalizations, 72% of patients were discharged with anemia: 31,903 (21%), mild; 52,971 (35%), moderate; and 25,522 (17%), severe. Discharge anemia was associated with severity-dependent increased odds for 30-day hospital readmission compared with those without anemia: for mild anemia, 1.74 (1.65-1.82); moderate anemia, 2.76 (2.64-2.89); and severe anemia, 3.47 (3.30-3.65), P < 0.001. Anemia at discharge is associated with a severity-dependent increased risk for 30-day readmission. A strategy focusing on anemia treatment care paths during index hospitalization offers an opportunity to influence subsequent readmissions.

Polarized Raman spectroscopy of chemically vapour deposited diamond films

International Nuclear Information System (INIS)

Prawer, S.; Nugent, K.W.; Weiser, P.S.

1994-01-01

Polarized micro-Raman spectra of chemically vapour deposited diamond films are presented. It is shown that important parameters often extracted from the Raman spectra such as the ratio of the diamond to non-diamond component of the films and the estimation of the level of residual stress depend on the orientation of the diamond crystallites with respect to the polarization of the incident laser beam. The dependence originates from the fact that the Raman scattering from the non-diamond components in the films is almost completely depolarized whilst the scattering from the diamond components is strongly polarized. The results demonstrate the importance of taking polarization into account when attempting to use Raman spectroscopy in even a semi-quantitative fashion for the assessment of the purity, perfection and stress in CVD diamond films. 8 refs., 1 tab. 2 figs

CLASSIFICATION AND DIAGNOSTICS OF ANEMIA IN CHILDREN

OpenAIRE

A. G. Rumyantsev

2011-01-01

Anemia in children is one of the most frequent somatic diseases. Criteria of anemia diagnosis are strictly regulated as decrease of hemoglobin/erythrocytes level accompanies majority of infectious, inflammatory, autoimmune, hereditary diseases and, in several cases, it is estimated as transitory disease in some periods of children’s growth and development. The article presents main classification and differential diagnostic schemes of anemia. Diagnostics makes accent on laboratory analysis; t...

An unusual cause of anemia and encephalopathy

Directory of Open Access Journals (Sweden)

Sanjeev Kumar Sharma

2015-04-01

Full Text Available The authors present here an interesting case of recent onset anemia that was associated with an encephalopathy of the unusual cause.Although severe anemia can theoretically result in anemic hypoxia and can then lead to hypoxic encephalopathy, it is not a primary cause of encephalopathy. More frequently anemia can contribute together with other multiple causes of encephalopathy, such as infections, metabolic abnormalities, trauma, hepatic dysfunction, hypertension, toxins.

Encapsulation of electroless copper patterns into diamond films

Energy Technology Data Exchange (ETDEWEB)

Pimenov, S.M.; Shafeev, G.A.; Lavrischev, S.V. [General Physics Institute, Moscow (Russian Federation)] [and others

1995-12-31

The results are reported on encapsulating copper lines into diamond films grown by a DC plasma CVD. The process includes the steps of (i) laser activation of diamond for electroless metal plating, (ii) electroless copper deposition selectively onto the activated surface regions, and (iii) diamond regrowth on the Cu-patterned diamond films. The composition and electrical properties of the encapsulated copper lines were examined, revealing high purity and low electrical resistivity of the encapsulated electroless copper.

Anemia, tumor hypoxemia, and the cancer patient

International Nuclear Information System (INIS)

Varlotto, John; Stevenson, Mary Ann

2005-01-01

Purpose: To review the impact of anemia/tumor hypoxemia on the quality of life and survival in cancer patients, and to assess the problems associated with the correction of this difficulty. Methods: MEDLINE searches were performed to find relevant literature regarding anemia and/or tumor hypoxia in cancer patients. Articles were evaluated in order to assess the epidemiology, adverse patient effects, anemia correction guidelines, and mechanisms of hypoxia-induced cancer cell growth and/or therapeutic resistance. Past and current clinical studies of radiosensitization via tumor oxygenation/hypoxic cell sensitization were reviewed. All clinical studies using multi-variate analysis were analyzed to show whether or not anemia and/or tumor hypoxemia affected tumor control and patient survival. Articles dealing with the correction of anemia via transfusion and/or erythropoietin were reviewed in order to show the impact of the rectification on the quality of life and survival of cancer patients. Results: Approximately 40-64% of patients presenting for cancer therapy are anemic. The rate of anemia rises with the use of chemotherapy, radiotherapy, and hormonal therapy for prostate cancer. Anemia is associated with reductions both in quality of life and survival. Tumor hypoxemia has been hypothesized to lead to tumor growth and resistance to therapy because it leads to angiogenesis, genetic mutations, resistance to apoptosis, and a resistance to free radicals from chemotherapy and radiotherapy. Nineteen clinical studies of anemia and eight clinical studies of tumor hypoxemia were found that used multi-variate analysis to determine the effect of these conditions on the local control and/or survival of cancer patients. Despite differing definitions of anemia and hypoxemia, all studies have shown a correlation between low hemoglobin levels and/or higher amounts of tumor hypoxia with poorer prognosis. Radiosensitization through improvements in tumor oxygenation/hypoxic cell

Incidencia y mortalidad por anemia en pacientes gravemente enfermos Incidence and mortality due to anemia in acutely ill patients

Directory of Open Access Journals (Sweden)

Maicelys Ramírez Zaldívar

2012-09-01

Full Text Available Introducción: la anemia es una de las enfermedades más conocidas y evaluadas en la práctica médica diaria. Objetivo: determinar la morbilidad y mortalidad de pacientes graves con anemia. Métodos: se realizó un estudio prospectivo de 118 pacientes ingresados en la Unidad de Terapia Intensiva del Hospital General Universitario "Vladimir Ilich Lenin" de Holguín, desde agosto hasta diciembre de 2010. Las variables discretas fueron comparadas mediante el test de £i al cuadrado y el de Fisher, y las continuas, por medio de las pruebas de T-Student y Mann-Whitney (la hemoglobina media, para á=0,05. Resultados: la anemia afectó 79,6 % de los integrantes de la serie y aumentó evolutivamente, con el consecuente empeoramiento de estos, de los cuales fallecieron 34,0 %, quienes tenían mayor edad (p=0,0004, necesitaron más transfusiones sanguíneas (p=0,005 y presentaron el trastorno de la hemoglobina más tardíamente (5,1 días. De los pacientes con anemia grave (hemoglobina:0,05. Conclusiones: la anemia en los pacientes graves se relacionó con una mayor mortalidad, estadía, necesidad de transfusiones de glóbulos rojos y causas médicas (neurológicas, en tanto, la edad avanzada y la gravedad de la anemia de aparición tardía se asociaron fundamentalmente a la mortalidad.Introduction: anemia is one of the well-known and evaluated diseases in the daily medical practice. Objective: to determine the morbidity and mortality of acutely ill patients with anemia. Methods: a prospective study of 118 patients admitted in the Intensive Therapy Unit of "Vladimir Ilich Lenin" General University Hospital in Holguín was carried out from August to December, 2010. Discrete variables were compared by means of the X² and Fisher tests, and the continuous variables, by means of the T-Student and Mann-Whitney tests (the mean hemoglobin, for á =0.05. Results: anemia affected 79.6% of the members of the series and it increased progressively, with the

Physics and applications of CVD diamond

CERN Document Server

Koizumi, Satoshi; Nesladek, Milos

2008-01-01

Here, leading scientists report on why and how diamond can be optimized for applications in bioelectronic and electronics. They cover such topics as growth techniques, new and conventional doping mechanisms, superconductivity in diamond, and excitonic properties, while application aspects include quantum electronics at room temperature, biosensors as well as diamond nanocantilevers and SAWs.Written in a review style to make the topic accessible for a wider community of scientists working in interdisciplinary fields with backgrounds in physics, chemistry, biology and engineering, this is e

Alluvial Diamond Resource Potential and Production Capacity Assessment of Ghana

Science.gov (United States)

Chirico, Peter G.; Malpeli, Katherine C.; Anum, Solomon; Phillips, Emily C.

2010-01-01

In May of 2000, a meeting was convened in Kimberley, South Africa, and attended by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that rough, exported diamonds were free of conflictual concerns. This meeting was supported later in 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by both diamond-producing and diamond-importing countries. Over 70 countries were included as members at the end of 2007. To prevent trade in 'conflict' diamonds while protecting legitimate trade, the KPCS requires that each country set up an internal system of controls to prevent conflict diamonds from entering any imported or exported shipments of rough diamonds. Every diamond or diamond shipment must be accompanied by a Kimberley Process (KP) certificate and be contained in tamper-proof packaging. The objective of this study was to assess the alluvial diamond resource endowment and current production capacity of the alluvial diamond-mining sector in Ghana. A modified volume and grade methodology was used to estimate the remaining diamond reserves within the Birim and Bonsa diamond fields. The production capacity of the sector was estimated using a formulaic expression of the number of workers reported in the sector, their productivity, and the average grade of deposits mined. This study estimates that there are approximately 91,600,000 carats of alluvial diamonds remaining in both the Birim and Bonsa diamond fields: 89,000,000 carats in the Birim and 2,600,000 carats in the Bonsa. Production capacity is calculated to be 765,000 carats per year, based on the formula used and available data on the number of workers and worker productivity. Annual production is highly dependent on the international diamond market and prices, the numbers of seasonal workers actively mining in the sector, and

[Effect of anemia on child development: long-term consequences].

Science.gov (United States)

Zavaleta, Nelly; Astete-Robilliard, Laura

2017-01-01

Anemia in children younger than 3 years is a public health problem in Peru and worldwide. It is believed that one of the primary causes of anemia is iron deficiency. Numerous studies and reviews have reported that iron deficiency limited psychomotor development in children and that, despite the correction of anemia, children with iron deficiency experienced poorer long-term performance in cognitive, social, and emotional functioning. These outcomes were reported in observational studies, follow-up studies, and experimental studies with a control group. Anemia can decrease school performance, productivity in adult life, quality of life, and the general income of affected individuals. Here we describe possible mechanisms underlying the effect of iron deficiency, with or without anemia, on childhood development. The high rate of anemia in this age group is a cause for concern. Moreover, anemia should be prevented in the first year of life to avoid long-term negative effects on individual development.

Polycrystalline diamond detectors with three-dimensional electrodes

Energy Technology Data Exchange (ETDEWEB)

Lagomarsino, S., E-mail: lagomarsino@fi.infn.it [University of Florence, Department of Physics, Via Sansone 1, 50019 Sesto Fiorentino (Italy); INFN Firenze, Via B. Rossi 1, 50019 Sesto Fiorentino (Italy); Bellini, M. [INO-CNR Firenze, Largo E. Fermi 6, 50125 Firenze (Italy); Brianzi, M. [INFN Firenze, Via B. Rossi 1, 50019 Sesto Fiorentino (Italy); Carzino, R. [Smart Materials-Nanophysics, Istituto Italiano di Tecnologia, Genova, Via Morego 30, 16163 Genova (Italy); Cindro, V. [Joseph Stefan Institute, Jamova Cesta 39, 1000 Ljubljana (Slovenia); Corsi, C. [University of Florence, Department of Physics, Via Sansone 1, 50019 Sesto Fiorentino (Italy); LENS Firenze, Via N. Carrara 1, 50019 Sesto Fiorentino (Italy); Morozzi, A.; Passeri, D. [INFN Perugia, Perugia (Italy); Università degli Studi di Perugia, Dipartimento di Ingegneria, via G. Duranti 93, 06125 Perugia (Italy); Sciortino, S. [University of Florence, Department of Physics, Via Sansone 1, 50019 Sesto Fiorentino (Italy); INFN Firenze, Via B. Rossi 1, 50019 Sesto Fiorentino (Italy); Servoli, L. [INFN Perugia, Perugia (Italy)

2015-10-01

The three-dimensional concept in diamond detectors has been applied, so far, to high quality single-crystal material, in order to test this technology in the best available conditions. However, its application to polycrystalline chemical vapor deposited diamond could be desirable for two reasons: first, the short inter-electrode distance of three-dimensional detectors should improve the intrinsically lower collection efficiency of polycrystalline diamond, and second, at high levels of radiation damage the performances of the poly-crystal material are not expected to be much lower than those of the single crystal one. We report on the fabrication and test of three-dimensional polycrystalline diamond detectors with several inter-electrode distances, and we demonstrate that their collection efficiency is equal or higher than that obtained with conventional planar detectors fabricated with the same material. - Highlights: • Pulsed laser fabrication of polycristalline diamond detectors with 3D electrodes. • Measurement of the charge collection efficiency (CCE) under beta irradiation. • Comparation between the CCE of 3D and conventional planar diamond sensors. • A rationale for the behavior of three-dimensional and planar sensors is given.

Use of the diamond to the detection of particles

International Nuclear Information System (INIS)

Mer, C.; Tromson, D.; Brambilla, A.; Foulon, F.; Guizard, B.; Bergonzo

2001-01-01

Diamond synthesized by chemical vapor deposition (CVD) is a valuable material for the detection of particles: broad forbidden energy band, high mobility of electron-hole pairs, and a short life-time of charge carriers. Diamond layers have been used in alpha detectors or gamma dose ratemeters designed to be used in hostile environment. Diamond presents a high resistance to radiation and corrosion. The properties of diamond concerning the detection of particles are spoilt by the existence of crystal defects even in high quality natural or synthesized diamond. This article presents recent works that have been performed in CEA laboratories in order to optimize the use of CVD diamond in particle detectors. (A.C.)

Direct Coating of Nanocrystalline Diamond on Steel

Science.gov (United States)

Tsugawa, Kazuo; Kawaki, Shyunsuke; Ishihara, Masatou; Hasegawa, Masataka

2012-09-01

Nanocrystalline diamond films have been successfully deposited on stainless steel substrates without any substrate pretreatments to promote diamond nucleation, including the formation of interlayers. A low-temperature growth technique, 400 °C or lower, in microwave plasma chemical vapor deposition using a surface-wave plasma has cleared up problems in diamond growth on ferrous materials, such as the surface graphitization, long incubation time, substrate softening, and poor adhesion. The deposited nanocrystalline diamond films on stainless steel exhibit good adhesion and tribological properties, such as a high wear resistance, a low friction coefficient, and a low aggression strength, at room temperature in air without lubrication.

Transient Ischemic Attack Caused by Iron Deficiency Anemia

Directory of Open Access Journals (Sweden)

Ufuk Emre

2006-02-01

Full Text Available Transient Ischemic Attack Caused by Iron Deficiency Anemia Transient ischemic attacks are episodes of transient focal ischemia involving the brain or brainstem. They are commonly two to thirty minutes in duration and lasting less than 24 hours. Anemia of iron deficiency isn’t frequently cause for transient ischemic attack. It has been reported as a risk factor for childhood ischemic strokes. In the iron deficiency anemia, T‹A may develop as result of hypercoagulable state and increased viscosity that is caused by anemic hypoxia that is result of reduce hemoglobine level, seconder thrombosis and microcytose As iron deficiency anemia has been reported so rarely in adult patients with transient ischemic attacks as a cause, we aimed to discuss the clinical and outcome features of two cases with iron deficiency anemia and transient ischemic attacks in this study. Materials and methods: Routine neurologic examination, biochemical screen, serological tests, vasculitic markers, thyroid function tests, vitamin B 12 level, cranial imaging, vertebral carotid doppler USG examination was conducted in the two patients. Anemia of iron deficiency was found as the only risk factor for TIA and the two patients were treated with replacement of iron and antiagregan therapy. Neurological examination revealed no abnormality through the two years of follow-up. The iron deficiency anemia may be cause of many neurologic problems such a irritability, lethargy, headache, development retardation except from T‹A. In the iron deficiency anemia, early diagnosis and treatment is important

Thyroid storm and warm autoimmune hemolytic anemia.

Science.gov (United States)

Moore, Joseph A; Gliga, Louise; Nagalla, Srikanth

2017-08-01

Graves' disease is often associated with other autoimmune disorders, including rare associations with autoimmune hemolytic anemia (AIHA). We describe a unique presentation of thyroid storm and warm AIHA diagnosed concurrently in a young female with hyperthyroidism. The patient presented with nausea, vomiting, diarrhea and altered mental status. Laboratory studies revealed hemoglobin 3.9g/dL, platelets 171×10 9 L -1 , haptoglobin storm and warm AIHA. She was started on glucocorticoids to treat both warm AIHA and thyroid storm, as well as antithyroid medications, propranolol and folic acid. Due to profound anemia and hemodynamic instability, the patient was transfused two units of uncrossmatched packed red blood cells slowly and tolerated this well. She was discharged on methimazole as well as a prolonged prednisone taper, and achieved complete resolution of the thyrotoxicosis and anemia at one month. Hyperthyroidism can affect all three blood cell lineages of the hematopoietic system. Anemia can be seen in 10-20% of patients with thyrotoxicosis. Several autoimmune processes can lead to anemia in Graves' disease, including pernicious anemia, celiac disease, and warm AIHA. This case illustrates a rarely described presentation of a patient with Graves' disease presenting with concurrent thyroid storm and warm AIHA. Copyright © 2017 Elsevier Ltd. All rights reserved.

Nanomechanical resonant structures in single-crystal diamond

OpenAIRE

Burek, Michael J.; Ramos, Daniel; Patel, Parth; Frank, Ian W.; Lončar, Marko

2013-01-01

With its host of outstanding material properties, single-crystal diamond is an attractive material for nanomechanical systems. Here, the mechanical resonance characteristics of freestanding, single-crystal diamond nanobeams fabricated by an angled-etching methodology are reported. Resonance frequencies displayed evidence of significant compressive stress in doubly clamped diamond nanobeams, while cantilever resonance modes followed the expected inverse-length-squared trend. Q-factors on the o...

Polycrystalline-Diamond MEMS Biosensors Including Neural Microelectrode-Arrays

Directory of Open Access Journals (Sweden)

Donna H. Wang

2011-08-01

Full Text Available Diamond is a material of interest due to its unique combination of properties, including its chemical inertness and biocompatibility. Polycrystalline diamond (poly-C has been used in experimental biosensors that utilize electrochemical methods and antigen-antibody binding for the detection of biological molecules. Boron-doped poly-C electrodes have been found to be very advantageous for electrochemical applications due to their large potential window, low background current and noise, and low detection limits (as low as 500 fM. The biocompatibility of poly-C is found to be comparable, or superior to, other materials commonly used for implants, such as titanium and 316 stainless steel. We have developed a diamond-based, neural microelectrode-array (MEA, due to the desirability of poly-C as a biosensor. These diamond probes have been used for in vivo electrical recording and in vitro electrochemical detection. Poly-C electrodes have been used for electrical recording of neural activity. In vitro studies indicate that the diamond probe can detect norepinephrine at a 5 nM level. We propose a combination of diamond micro-machining and surface functionalization for manufacturing diamond pathogen-microsensors.

Comparative evaluation of CVD diamond technologies

Energy Technology Data Exchange (ETDEWEB)

Anthony, T.R. [General Electric Corporate Research & Development Center, Schenectady, NY (United States)

1993-01-01

Chemical vapor deposition (CVD) of diamonds occurs from hydrogen-hydrocarbon gas mixtures in the presence of atomic hydrogen at subatmospheric pressures. Most CVD methods are based on different means of generating and transporting atomic hydrogen in a particular system. Evaluation of these different techniques involves their capital costs, material costs, energy costs, labor costs and the type and quality of diamond that they produce. Currently, there is no universal agreement on which is the best technique and technique selection has been largely driven by the professional background of the user as well as the particular application of interest. This article discusses the criteria for evaluating a process for low-pressure deposition of diamond. Next, a brief history of low-pressure diamond synthesis is reviewed. Several specific processes are addressed, including the hot filament process, hot filament electron-assisted chemical vapor deposition, and plasma generation of atomic hydrogen by glow discharge, microwave discharge, low pressure radio frequency discharge, high pressure DC discharge, high pressure microwave discharge jets, high pressure RF discharge, and high and low pressure flames. Other types of diamond deposition methods are also evaluated. 101 refs., 15 figs.

Pyrexia due to megaloblastic anemia: An Unusual Case

Directory of Open Access Journals (Sweden)

Singh PS, Vijay Verma, Vidyasagar, Granth Kumar

2014-07-01

Full Text Available Postmenopausal vegetarian female presented with short febrile illness associated with generalized weakness Clinical and investigative findings evidenced megaloblastic anemia Since none of investigations could pinpoint the cause for pyrexia and patient did not respond to empirical antibiotic and conservative antimalarial therapy, megaloblastic anemia itself was suspected to be cause for febrile episode Patient was treated with parenteral B12 and oral folic acid for megaloblastic anemia and she responded to it and became afebrile within 72 hours. Subsequently megaloblastic anemia was correlated to be cause of febrile illness.

Effect of pretreatment and deposition parameters on diamond nucleation in CVD

International Nuclear Information System (INIS)

Nazim, E.; Izman, S.; Ourdjini, A.; Shaharoun, A.M.

2007-01-01

Chemical vapour deposition (CVD) of diamond films on cemented carbide (WC) has aroused great interest in recent years. The combination of toughness from the WC and the high hardness of diamond results in outstanding wear resistance. This will increase the lifetime and better technical performance of the components made of diamond coated carbide. One of the important steps in the growth of diamond film is the nucleation of diamond as its density strongly influences the diamond growth process, film quality and morphology. In this paper the various effects of surface pretreatment and diamond deposition conditions on the diamond nucleation density are reviewed. (author)

Preparation of Ti-coated diamond particles by microwave heating

International Nuclear Information System (INIS)

Gu, Quanchao; Peng, Jinghui; Xu, Lei; Srinivasakannan, C.

2016-01-01

Highlights: • The Ti-Coated diamond particles have been prepared using by microwave heating. • The uniform and dense coating can be produced, and the TiC species was formed. • With increases the temperature results in the thickness of coating increased. • The coating/diamond interfacial bonding strength increased with temperature increasing until 760 °C, then decreased. - Abstract: Depositing strong carbide-forming elements on diamond surface can dramatically improve the interfacial bonding strength between diamond grits and metal matrix. In the present work, investigation on the preparation of Ti-coated diamond particles by microwave heating has been conducted. The morphology, microstructure, and the chemical composition of Ti-coated diamond particles were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive x-ray spectrometer (EDX). The thickness of Ti coating was measured and the interfacial binding strength between Ti coating and diamond was analyzed. The results show that the surface of the diamond particles could be successfully coated with Ti, forming a uniform and continuous Ti-coated layer. The TiC was found to form between the surface of diamond particles and Ti-coated layer. The amount of TiC as well as the thickness of coating increased with increasing coating temperature, furthermore, the grain size of the coating also grew gradually. The interfacial bonding strength between coating and diamond was found to be best at the temperature of 760 °C.

Preparation of Ti-coated diamond particles by microwave heating

Energy Technology Data Exchange (ETDEWEB)

Gu, Quanchao [National Local Joint Laboratory of Engineering Application of Microwave Energy and Equipment Technology, Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093 (China); Yunnan Copper Smelting and Processing Complex, Yunnan Copper (Group) CO., LTD., Kunming 650102 (China); International Joint Research Center of Advanced Preparation of Superhard Materials Field, Kunming Academician Workstation of Advanced Preparation of Superhard Materials Field, Kunming 650093 (China); Peng, Jinghui [National Local Joint Laboratory of Engineering Application of Microwave Energy and Equipment Technology, Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093 (China); International Joint Research Center of Advanced Preparation of Superhard Materials Field, Kunming Academician Workstation of Advanced Preparation of Superhard Materials Field, Kunming 650093 (China); Xu, Lei, E-mail: xulei_kmust@aliyun.com [National Local Joint Laboratory of Engineering Application of Microwave Energy and Equipment Technology, Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093 (China); Mechanical Engineering, University of Washington, Seattle, WA 98195 (United States); International Joint Research Center of Advanced Preparation of Superhard Materials Field, Kunming Academician Workstation of Advanced Preparation of Superhard Materials Field, Kunming 650093 (China); Srinivasakannan, C. [Chemical Engineering Department, The Petroleum Institute, P.O. Box 2533, Abu Dhabi (United Arab Emirates); and others

2016-12-30

Highlights: • The Ti-Coated diamond particles have been prepared using by microwave heating. • The uniform and dense coating can be produced, and the TiC species was formed. • With increases the temperature results in the thickness of coating increased. • The coating/diamond interfacial bonding strength increased with temperature increasing until 760 °C, then decreased. - Abstract: Depositing strong carbide-forming elements on diamond surface can dramatically improve the interfacial bonding strength between diamond grits and metal matrix. In the present work, investigation on the preparation of Ti-coated diamond particles by microwave heating has been conducted. The morphology, microstructure, and the chemical composition of Ti-coated diamond particles were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and energy dispersive x-ray spectrometer (EDX). The thickness of Ti coating was measured and the interfacial binding strength between Ti coating and diamond was analyzed. The results show that the surface of the diamond particles could be successfully coated with Ti, forming a uniform and continuous Ti-coated layer. The TiC was found to form between the surface of diamond particles and Ti-coated layer. The amount of TiC as well as the thickness of coating increased with increasing coating temperature, furthermore, the grain size of the coating also grew gradually. The interfacial bonding strength between coating and diamond was found to be best at the temperature of 760 °C.

A Review on the Low-Dimensional and Hybridized Nanostructured Diamond Films

Directory of Open Access Journals (Sweden)

Hongdong Li

2015-01-01

Full Text Available In the last decade, besides the breakthrough of high-rate growth of chemical vapor deposited single-crystal diamonds, numerous nanostructured diamond films have been rapidly developed in the research fields of the diamond-based sciences and industrial applications. The low-dimensional diamonds of two-dimensional atomic-thick nanofilms and nanostructural diamond on the surface of bulk diamond films have been theoretically and experimentally investigated. In addition, the diamond-related hybrid nanostructures of n-type oxide/p-type diamond and n-type nitride/p-type diamond, having high performance physical and chemical properties, are proposed for further applications. In this review, we first briefly introduce the three categories of diamond nanostructures and then outline the current advances in these topics, including their design, fabrication, characterization, and properties. Finally, we address the remaining challenges in the research field and the future activities.

Genetics Home Reference: X-linked sideroblastic anemia and ataxia

Science.gov (United States)

... linked sideroblastic anemia and ataxia X-linked sideroblastic anemia and ataxia Printable PDF Open All Close All ... the expand/collapse boxes. Description X-linked sideroblastic anemia and ataxia is a rare condition characterized by ...

[Prevalence of anemia in reproductive-age Mexican women].

Science.gov (United States)

Shamah-Levy, Teresa; Villalpando, Salvador; Mundo-Rosas, Verónica; De la Cruz-Góngora, Vanessa; Mejía-Rodríguez, Fabiola; Méndez Gómez-Humarán, Ignacio

2013-01-01

To update the prevalence of anemia and its trend in Mexican women of childbearing age over the past 13 years using information from the National Health and Nutrition Survey 2012 and 2006 (ENSANUT 2012 and ENSANUT 2006, respectively) and from the National Nutrition Survey 1999 (ENN 99). Data came from three national probabilistic surveys, representative at regional and rural / urban level. Hemoglobin (Hb) in women was measured using a HemoCue photometer and classified as anemia according to the WHO criteria. Frequencies and CI95% were estimated for each survey (ENSANUT 2012, ENSANUT 2006 and ENN 99) as well as percentage changes in anemia prevalence among pregnant and non-pregnant women in this survey sequence. The national prevalence of anemia in 2012 in non-pregnant women was 11.6% and in pregnant women was 17.9%. Between 1999 and 2012, a 10 percentage point (pp) decreasing in anemia prevalence was observed in the first ones and a 13.5 pp in the second ones. Although it has declined in the past 13 years, anemia in women of childbearing age remains as a serious public health problem. It is considered necessary to design strategies to prevent iron deficiency and for the early detection of anemia in women.

Reticulocyte parameters in hemoglobinopathies and iron deficiency anemia

Directory of Open Access Journals (Sweden)

Cortellazzi Laura C.

2003-01-01

Full Text Available Flow cytometric reticulocyte analysis allows the evaluation of reticulocyte maturity. New reticulocyte parameters have been used in the diagnosis and management of anemias, in the bone marrow transplant setting and in the monitoring of iron replacement or erythropoiet in therapy. Reticulocyte numbers and maturation levels have been studied in different hemoglobinopathies and the results have been correlated with the degree of ineffective erythropoiesis. In order to verify differences in reticulocyte parameters in various types of anemias and to test the absolute number of immature reticulocytes as a possible discriminating factor among various types of anemias, reticulocyte counts were performed on 219 samples from patients with sickle cell anemia (SS (n= 62, hemoglobin S trait (n=9, Sbeta thalassemia (n=7, hemoglobin SC disease (n=11, beta thalassemia trait (n=33 and iron deficiency anemia (n= 47, and non-anemic individuals (n= 50. Mean fluorescence index (MFI was defined as representative of the degree of reticulocyte immaturity and it was evaluated as a percentage and in absolute values. Reticulocyte counts and MFI values were significantly higher in SS, Sbeta thalassemic and SC groups when compared to controls, but not different among the three anemia groups. Patients with hemoglobin S trait, iron deficiency anemia and beta thalassemia trait showed reticulocyte parameters similar to the non-anemic group. There was no difference between the b thalassemic trait and iron deficiency anemia in relation to any parameters. MFI in absolute numbers were significantly higher in anemias that develop with the hemolytic process, although this was not evident in MFI percentage values. Our results showed that the erythoid expansion in sickle cell diseases (SS, SC and Sb thalassemia leads to an enhanced immature reticulocyte release from bone marrow and that the phenomena is more evident by the MFI counting in absolute figures than in percentages. We

Residual radioactivity of treated green diamonds.

Science.gov (United States)

Cassette, Philippe; Notari, Franck; Lépy, Marie-Christine; Caplan, Candice; Pierre, Sylvie; Hainschwang, Thomas; Fritsch, Emmanuel

2017-08-01

Treated green diamonds can show residual radioactivity, generally due to immersion in radium salts. We report various activity measurements on two radioactive diamonds. The activity was characterized by alpha and gamma ray spectrometry, and the radon emanation was measured by alpha counting of a frozen source. Even when no residual radium contamination can be identified, measurable alpha and high-energy beta emissions could be detected. The potential health impact of radioactive diamonds and their status with regard to the regulatory policy for radioactive products are discussed. Copyright © 2017. Published by Elsevier Ltd.

An assessment of radiotherapy dosimeters based on CVD grown diamond

International Nuclear Information System (INIS)

Ramkumar, S.; Buttar, C.M.; Conway, J.; Whitehead, A.J.; Sussman, R.S.; Hill, G.; Walker, S.

2001-01-01

Diamond is potentially a very suitable material for use as a dosimeter for radiotherapy. Its radiation hardness, the near tissue equivalence and chemical inertness are some of the characteristics of diamond, which make it well suited for its application as a dosimeter. Recent advances in the synthesis of diamond by chemical vapour deposition (CVD) technology have resulted in the improvement in the quality of material and increased its suitability for radiotherapy applications. We report in this paper, the response of prototype dosimeters based on two different types (CVD1 and CVD2) of CVD diamond to X-rays. The diamond devices were assessed for sensitivity, dependence of response on dose and dose rate, and compared with a Scanditronix silicon photon diode and a PTW natural diamond dosimeter. The diamond devices of CVD1 type showed an initial increase in response with dose, which saturates after ∼6 Gy. The diamond devices of CVD2 type had a response at low fields ( 1162.8 V/cm), the CVD2-type devices showed polarisation and dose-rate dependence. The sensitivity of the CVD diamond devices varied between 82 and 1300 nC/Gy depending upon the sample type and the applied voltage. The sensitivity of CVD diamond devices was significantly higher than that of natural diamond and silicon dosimeters. The results suggest that CVD diamond devices can be fabricated for successful use in radiotherapy applications

Prevalence, severity, and related factors of anemia in HIV/AIDS patients

Directory of Open Access Journals (Sweden)

Mohsen Meidani

2012-01-01

Full Text Available Objective: The prevalence of anemia in HIV infected patients has not been well characterized in Iran. This study aimed to describe the prevalence of anemia and related factors in HIV positive patients. Materials and Methods: In a cross-sectional study, anemia prevalence and risk factors of 212 HIV positive patients were assessed, at the behavioral disease consulting center in Isfahan. The relationship between anemia, demographic variables, and clinical histories were analyzed. Mild to moderate anemia was defined as hemoglobin 8-13 g/dL for men and 8-12 g/dL for women. Severe anemia was defined as hemoglobin, 8 g/dL. Results: A total of 212 HIV positive patients with a mean±SD age of 36.1 ± 9.1 years were assessed. We found that hemoglobin levels were between 4.7 and 16.5 gr/dL. In this study, the overall prevalence of anemia was 71%, with the majority of patients having mild to moderate anemia. Mild to moderate anemia and severe anemia occurred in 67% and 4% of patients, respectively. The mean absolute CD4 count was 348 ± 267.8 cells/cubic mm. Sixty one of 212 patients were at late stage of HIV infection (males=51 and female=10. Of the 212 HIV positive patients enrolled, 17 (8% had a positive history of tuberculosis. We found a strong association between anemia and death. Conclusion: Normocytic anemia with decreased reticulocyte count was the most common type of anemia in overall. Prevalence of anemia in this study is relatively higher than other similar studies. Such a high prevalence of anemia needs close monitoring of patients on a zidovudine-based regimen. Better screening for anemia and infectious diseases, and modified harm reduction strategy (HRS for injection drug users are primary needs in HIV seropositive patients.

Morphology modulating the wettability of a diamond film.

Science.gov (United States)

Tian, Shibing; Sun, Weijie; Hu, Zhaosheng; Quan, Baogang; Xia, Xiaoxiang; Li, Yunlong; Han, Dong; Li, Junjie; Gu, Changzhi

2014-10-28

Control of the wetting property of diamond surface has been a challenge because of its maximal hardness and good chemical inertness. In this work, the micro/nanoarray structures etched into diamond film surfaces by a maskless plasma method are shown to fix a surface's wettability characteristics, and this means that the change in morphology is able to modulate the wettability of a diamond film from weakly hydrophilic to either superhydrophilic or superhydrophobic. It can be seen that the etched diamond surface with a mushroom-shaped array is superhydrophobic following the Cassie mode, whereas the etched surface with nanocone arrays is superhydrophilic in accordance with the hemiwicking mechnism. In addition, the difference in cone densities of superhydrophilic nanocone surfaces has a significant effect on water spreading, which is mainly derived from different driving forces. This low-cost and convenient means of altering the wetting properties of diamond surfaces can be further applied to underlying wetting phenomena and expand the applications of diamond in various fields.

Diamond detectors for synchrotron radiation X-ray applications

Energy Technology Data Exchange (ETDEWEB)

De Sio, A. [Laboratori Nazionali di Frascati, INFN, 00044 Frascati, Roma (Italy); Department of Astronomy and Space Science, Universita di Firenze, L.go E. Fermi 2, 50125 Firenze (Italy)], E-mail: desio@arcetri.astro.it; Pace, E. [Department of Astronomy and Space Science, Universita di Firenze, L.go E. Fermi 2, 50125 Firenze (Italy); INFN, Sezione di Firenze, v. G. Sansone 1, Sesto Fiorentino, Firenze (Italy); Cinque, G.; Marcelli, A. [Laboratori Nazionali di Frascati, INFN, 00044 Frascati, Roma (Italy); Achard, J.; Tallaire, A. [LIMHP-CNRS, University of Paris XIII, 99 Avenue JB Clement, 93430 Villetaneuse (France)

2007-07-15

Due to its unique physical properties, diamond is a very appealing material for the development of electronic devices and sensors. Its wide band gap (5.5 eV) endows diamond based devices with low thermal noise, low dark current levels and, in the case of radiation detectors, high visible-to-X-ray signal discrimination (visible blindness) as well as high sensitivity to energies greater than the band gap. Furthermore, due to its radiation hardness diamond is very interesting for applications in extreme environments, or as monitor of high fluency radiation beams. In this work the use of diamond based detectors for X-ray sensing is discussed. On purpose, some photo-conductors based on different diamond types have been tested at the DAFNE-L synchrotron radiation laboratory at Frascati. X-ray sensitivity spectra, linearity and stability of the response of these diamond devices have been measured in order to evidence the promising performance of such devices.

Diamond detectors for synchrotron radiation X-ray applications

International Nuclear Information System (INIS)

De Sio, A.; Pace, E.; Cinque, G.; Marcelli, A.; Achard, J.; Tallaire, A.

2007-01-01

Due to its unique physical properties, diamond is a very appealing material for the development of electronic devices and sensors. Its wide band gap (5.5 eV) endows diamond based devices with low thermal noise, low dark current levels and, in the case of radiation detectors, high visible-to-X-ray signal discrimination (visible blindness) as well as high sensitivity to energies greater than the band gap. Furthermore, due to its radiation hardness diamond is very interesting for applications in extreme environments, or as monitor of high fluency radiation beams. In this work the use of diamond based detectors for X-ray sensing is discussed. On purpose, some photo-conductors based on different diamond types have been tested at the DAFNE-L synchrotron radiation laboratory at Frascati. X-ray sensitivity spectra, linearity and stability of the response of these diamond devices have been measured in order to evidence the promising performance of such devices

Iron Deficiency and Anemia Predict Mortality in Patients with Tuberculosis123

Science.gov (United States)

Isanaka, Sheila; Mugusi, Ferdinand; Urassa, Willy; Willett, Walter C.; Bosch, Ronald J.; Villamor, Eduardo; Spiegelman, Donna; Duggan, Christopher; Fawzi, Wafaie W.

2012-01-01

Many studies have documented a high prevalence of anemia among tuberculosis (TB) patients and anemia at TB diagnosis has been associated with an increased risk of death. However, little is known about the factors contributing to the development of TB-associated anemia and their importance in TB disease progression. Data from a randomized clinical trial of micronutrient supplementation in patients with pulmonary TB in Tanzania were analyzed. Repeated measures of anemia with iron deficiency, anemia without iron deficiency, and iron deficiency without anemia were assessed as risk factors for treatment failure, TB recurrence, and mortality. The prevalence of anemia (hemoglobin iron deficiency (mean corpuscular volume , 80 fL). We found no evidence of an association between anemia (with or without iron deficiency) or iron deficiency without anemia at baseline and the risk of treatment failure at 1 mo after initiation. Anemia without iron deficiency was associated with an independent, 4-fold increased risk of TB recurrence [adjusted RR = 4.10 (95% CI = 1.88, 8.91); P Iron deficiency and anemia (with and without iron deficiency) were associated with a 2- to nearly 3-fold independent increase in the risk of death [adjusted RR for iron deficiency without anemia = 2.89 (95% CI = 1.53, 5.47); P = 0.001; anemia without iron deficiency = 2.72 (95% CI = 1.50, 4.93); P = 0.001; iron deficiency anemia = 2.13 (95% CI = 1.10, 4.11); P = 0.02]. Efforts to identify and address the conditions contributing to TB-associated anemia, including iron deficiency, could play an important role in reducing morbidity and mortality in areas heavily affected by TB. PMID:22190024

Surface smoothening effects on growth of diamond films

Science.gov (United States)

Reshi, Bilal Ahmad; Kumar, Shyam; Kartha, Moses J.; Varma, Raghava

2018-04-01

We have carried out a detailed study of the growth dynamics of the diamond film during initial time on diamond substrates. The diamond films are deposited using Microwave Plasma Chemical Vapor Deposition (MPCVD) method for different times. Surface morphology and its correlation with the number of hours of growth of thin films was invested using atomic force microscopy (AFM). Diamond films have smooth interface with average roughness of 48.6873nm. The initial growth dynamics of the thin film is investigated. Interestingly, it is found that there is a decrease in the surface roughness of the film. Thus a smoothening effect is observed in the grown films. The film enters into the growth regime in the later times. Our results also find application in building diamond detector.

Dosimetry in radiotherapy with natural diamond detectors

International Nuclear Information System (INIS)

De Angelis, C.; Onori, S.; Pacilio, M.; Cirrone, G.A.P.; Cuttone, G.; Raffaele, L.; Bucciolini, M.; Mazzocchi, S.

2002-01-01

There is wide interest in the use of diamond detectors for dosimetry in radiotherapy mainly because of the small dimensions, radiation hardness, nearly tissue equivalence of sensitive material and capability to deliver the dosimetric response 'on line'. In order to assess the dosimetric properties of PTW Riga diamond detectors type 60003, experiments were performed in conventional (high energy photon and electron) therapy beams as well as in proton therapy beams. The main detector features investigated were reproducibility of response, dose-signal relationship, temperature dependence, dose-rate dependence, energy dependence and angular dependence. High energy photons (6-25 MV) and electrons (6-22 MeV), available at the Radiotherapy Department of the Florence University, were used for investigating the general properties. Two different PTW diamond detectors of the same type were used to evidence inter-sample differences. The beam quality dependence of the detector response is probably the most critical point and this statement is of particular relevance for proton dosimetry since the proton LET changes with depth in the medium. Mainly because of the little information available on detector sensitivity variations with beam energy, the use of diamonds for clinical proton dosimetry is not widespread. In two recent papers a sensitivity dependence on proton energy of a natural PTW diamond detector has been reported. Due to the necessity to characterise each diamond detector individually the PTW Riga natural diamond detector in operation at the LNS-INFN, Catania, Italy was tested with the local proton beam line. This experiment is of main concern because this proton beam, produced by a superconducting cyclotron and used for ocular melanoma treatment, is available only since 2001 (CATANA beam). The first patient has been treated in February 2002. Proton irradiations were performed with non modulated and modulated 62 MeV beams. Attention was focused on diamond sensitivity

Profilaxia da anemia ancilostomótica: sindrome de carencia Prophylaxis of Hookworm Anemia-carencial syndrome

Directory of Open Access Journals (Sweden)

W. O. Cruz

1945-04-01

Full Text Available É apresentada uma revisão das recentes aquisições na anemia ancilostomótica, assinalando a importância de alimentação qualitativamente deficiente junto á infestação helmíntica na gênese desta doença. Acentuou-se que a anemia ancilostomótica é uma doença de carência. Profilaxia clássica da Ancilostomose resume-se em evitar a infestação do homem pelos ancilostomídeos. Critica-se a aplicabilidade destas medidas e eficiência das mesmas no que diz respeito á incidência da anemia. O presente trabalho mostra aquisições preliminares sôbre fundamentos de uma profilaxia de carência (tipo profilaxia do bócio endêmico da anemia ancilostomótica, baseada na administração de alimentos contaminados por um sal de ferro. As misturas sulfato ferroso-farinha de mandióca e citrato férrico amoniacal-caldo de feijão, mostraram-se eficientes em prevenir a queda das cifras hemáticas durante largos períodos de tempo em indivíduos maciçamente infestados (6-8 meses. Não foi verificada a dose diária mínima eficiente dêstes sais, obtendo-se resultados satisfatorios mesmo com 0.1 g diária de sulfato ferroso (correspondendo a 0.037 g de ferro metálico. Numerosos alimentos e sais de ferro foram experimentados com resultados infrutíferos por diferentes razões. A influência dos helmintos, pela hemorragias intestinais que acarretam poude ser mais uma vez estudada, nos casos de sais de ferro administrados em doses ineficientes ou em períodos de prova sem medicação marcial. É proposta nova classificação de intensidade de infestação, levando em consideração o conhecido fato de ser a atividade dos helmintos, exclusivamente expoliadora. Em conclusão, nos parece exequível a profilaxia da anemia ancilostomótica mediante ingestão de alimentos contaminados por quantidades eficientes de sais de ferro. Êste método profilático extremamente econômico será na prática, provàvelmente, muito superior aos métodos de profilaxia

Salmonella osteomyelitis by sickle cell anemia

International Nuclear Information System (INIS)

Rausch, H.; Tran, V.T.; Boeckmann, U.; Duesseldorf Univ.

1985-01-01

Case report of a 28 year old black sickle cell anemia patient with salmonella osteomyelitis of the radius. Aside from sickle cell anemia patients this skeletal complication of enteric salmonellosis is an extreme rarity. Description of the typical roentgenological features includes intracortical fissures and sequestration. (orig.) [de

Fanconi anemia (cross)linked to DNA repair.

Science.gov (United States)

Niedernhofer, Laura J; Lalai, Astrid S; Hoeijmakers, Jan H J

2005-12-29

Fanconi anemia is characterized by hypersensitivity to DNA interstrand crosslinks (ICLs) and susceptibility to tumor formation. Despite the identification of numerous Fanconi anemia (FANC) genes, the mechanism by which proteins encoded by these genes protect a cell from DNA interstrand crosslinks remains unclear. The recent discovery of two DNA helicases that, when defective, cause Fanconi anemia tips the balance in favor of the direct involvement of the FANC proteins in DNA repair and the bypass of DNA lesions.

Diamond thin films: giving biomedical applications a new shine.

Science.gov (United States)

Nistor, P A; May, P W

2017-09-01

Progress made in the last two decades in chemical vapour deposition technology has enabled the production of inexpensive, high-quality coatings made from diamond to become a scientific and commercial reality. Two properties of diamond make it a highly desirable candidate material for biomedical applications: first, it is bioinert, meaning that there is minimal immune response when diamond is implanted into the body, and second, its electrical conductivity can be altered in a controlled manner, from insulating to near-metallic. In vitro, diamond can be used as a substrate upon which a range of biological cells can be cultured. In vivo , diamond thin films have been proposed as coatings for implants and prostheses. Here, we review a large body of data regarding the use of diamond substrates for in vitro cell culture. We also detail more recent work exploring diamond-coated implants with the main targets being bone and neural tissue. We conclude that diamond emerges as one of the major new biomaterials of the twenty-first century that could shape the way medical treatment will be performed, especially when invasive procedures are required. © 2017 The Authors.

First result on biased CMOS MAPs-on-diamond devices

Energy Technology Data Exchange (ETDEWEB)

Kanxheri, K., E-mail: keida.kanxheri@pg.infn.it [Università degli Studi di Perugia, Perugia (Italy); INFN Perugia, Perugia (Italy); Citroni, M.; Fanetti, S. [LENS Firenze, Florence (Italy); Lagomarsino, S. [Università degli Studi di Firenze, Florence (Italy); INFN Firenze, Pisa (Italy); Morozzi, A. [Università degli Studi di Perugia, Perugia (Italy); INFN Perugia, Perugia (Italy); Parrini, G. [Università degli Studi di Firenze, Florence (Italy); Passeri, D. [Università degli Studi di Perugia, Perugia (Italy); INFN Perugia, Perugia (Italy); Sciortino, S. [Università degli Studi di Firenze, Florence (Italy); INFN Firenze, Pisa (Italy); Servoli, L. [INFN Perugia, Perugia (Italy)

2015-10-01

Recently a new type of device, the MAPS-on-diamond, obtained bonding a thinned to 25 μm CMOS Monolithic Active Pixel Sensor to a standard 500 μm pCVD diamond substrate, has been proposed and fabricated, allowing a highly segmented readout (10×10 μm pixel size) of the signal produced in the diamond substrate. The bonding between the two materials has been obtained using a new laser technique to deliver the needed energy at the interface. A biasing scheme has been adopted to polarize the diamond substrate to allow the charge transport inside the diamond without disrupting the functionalities of the CMOS Monolithic Active Pixel Sensor. The main concept of this class of devices is the capability of the charges generated in the diamond by ionizing radiation to cross the silicon–diamond interface and to be collected by the MAPS photodiodes. In this work we demonstrate that such passage occurs and measure its overall efficiency. This study has been carried out first calibrating the CMOS MAPS with monochromatic X-rays, and then testing the device with charged particles (electrons) either with and without biasing the diamond substrate, to compare the amount of signal collected.

Anemia and iron deficiency before and after bariatric surgery.

Science.gov (United States)

Salgado, Wilson; Modotti, Caue; Nonino, Carla Barbosa; Ceneviva, Reginaldo

2014-01-01

Iron deficiency and anemia are changes often associated with obesity. Bariatric surgery is responsible for increasing the iron loss and reducing its absorption. The objective of this study was to evaluate anemia and iron deficiency before and after bariatric surgery and to relate them to possible predisposing factors. A retrospective study was conducted on obese patients submitted to open Roux-en-Y gastric bypass, in which clinical and laboratory data were obtained up to 48 months postoperatively. Patients were divided into groups according to the presence or absence of anemia and to the presence or absence of iron deficiency (even without anemia), and all data were compared between these groups. Preoperatively, 21.5% of patients had anemia and 20% had iron deficiency. The number of patients with anemia did not vary through the 4 years of the study, but ferritin levels significantly decreased with time (Panemia. Female gender was a variable associated with a greater incidence of iron deficiency. Anemia and iron deficiency are frequent in obese patients and must be treated before surgery. Medical and nutritional surveillance is important in the postoperative period of bariatric surgery. Management of each condition must be directed at correcting the 2 major sources of iron deficiency and anemia: food intolerance (mostly meat intolerance) and losses (frequently due to menstruation). These are the factors more related to iron deficient anemia. Copyright © 2014 American Society for Bariatric Surgery. Published by Elsevier Inc. All rights reserved.

Iron deficiency, anemia, and mortality in renal transplant recipients.

Science.gov (United States)

Eisenga, Michele F; Minović, Isidor; Berger, Stefan P; Kootstra-Ros, Jenny E; van den Berg, Else; Riphagen, Ineke J; Navis, Gerjan; van der Meer, Peter; Bakker, Stephan J L; Gaillard, Carlo A J M

2016-11-01

Anemia, iron deficiency anemia (IDA), and iron deficiency (ID) are highly prevalent in renal transplant recipients (RTR). Anemia is associated with poor outcome, but the role of ID is unknown. Therefore, we aimed to investigate the association of ID, irrespective of anemia, with all-cause mortality in RTR. Cox regression analyses were used to investigate prospective associations. In 700 RTR, prevalences of anemia, IDA, and ID were 34%, 13%, and 30%, respectively. During follow-up for 3.1 (2.7-3.9) years, 81 (12%) RTR died. In univariable analysis, anemia [HR, 1.72 (95%CI: 1.11-2.66), P = 0.02], IDA [2.44 (1.48-4.01), P anemia with mortality became weaker after adjustment for ID [1.52 (0.97-2.39), P = 0.07] and disappeared after adjustment for proteinuria and eGFR [1.09 (0.67-1.78), P = 0.73]. The association of IDA with mortality attenuated after adjustment for potential confounders. In contrast, the association of ID with mortality remained independent of potential confounders, including anemia [1.77 (1.13-2.78), P = 0.01]. In conclusion, ID is highly prevalent among RTR and is associated with an increased risk of mortality, independent of anemia. As ID is a modifiable factor, correction of ID could be a target to improve survival. © 2016 The Authors. Transplant International published by John Wiley & Sons Ltd on behalf of Steunstichting ESOT.

Clinical dosimeter based on diamond detector

International Nuclear Information System (INIS)

Chervjakov, A.M.; Ljalina, L.I.; Ljutina, G.J.; Khrunov, V.S.; Martynov, S.S.; Popov, S.A.

2002-01-01

Full text: Diamond detectors have found application in the relative dosimetry and their parameters have been described elsewhere. Today, the exclusive producer of the diamond detector is the Institute of Physical and Technical Problems, Russia, and exclusive dealer is the PTW-Freiburg. The main features of the diamond detector are good long time stability, suitable range of the energy dependence for photon and electron beams in clinical use, independence of the measured date from temperature and pressure. The high sensitivity per volume unit of the diamond detector (1500 times higher than ionization chamber) allowed using detectors with very small volume (1-5 mm 3 ) and rather simple electronics for ionization current registration. The new dosimeter consists of the diamond detector itself, 40 m registration cable, pre-amplifier, micro-processor block for data handling and absorbed dose calculation using the calibration factor of diamond detector in terms of absorbed dose to water. Dosimeter has the possibility to work with PC using standard RS-232 interface. The main features of the dosimeter are as follows: the range of dose rate measurements for photon, electron and proton beams is within 0.01-1.0 Gy/s; the energy ranges for photons are 0.08-25 MeV, and 4-25 MeV for electrons, with energy dependence no more than ±2%; the main uncertainty of the dose measurements is within ±2%; the pre-irradiation dose for diamond detector is no more than 10 Gy; the sensitive volume of the used diamond detectors is within 1-5 mm 3 ; the weight of the dosimeter no more than 2 kg. The new dosimeter was evaluated at the Central Research Institute of Roentgenology and Radiology, St. Petersburg, Russia to verify its performance. The dosimeter was used as a reference instrument for dose measurements at Cobalt-60 unit, SL75-5 and SL-20 linear accelerators and the test results have shown that the device have met the specifications. It is planned to produce dosimeter as serial device by

[Spatial analysis of gestational anemia in Peru, 2015].

Science.gov (United States)

Hernández-Vásquez, Akram; Azañedo, Diego; Antiporta, Daniel A; Cortés, Sandra

2017-01-01

To establish regional prevalences of anemia in pregnant women receiving care at public clinics in Peru in 2015 and identify high-prevalence district conglomerates. An ecological study was carried out on data from pregnant women with anemia registered on the Nutritional Status Information System (SIEN) who received care in 7703 public clinics in 2015. Regional and district prevalences of gestational anemia were calculated. District conglomerates with a high prevalence of gestational anemia were identified using the Moran Index. Information was gathered from 311,521 pregnant women distributed in 1638 districts in Peru. The national prevalence of anemia was 24.2% (95% confidence interval [95% CI]: 24.0-24.3%), the rural prevalence was 30.5%, and the urban prevalence was 22.0%. The regions of Huancavelica (45.5%; 95% CI: 44.2-46.7%), Puno (42.8%; 95% CI: 41.9-43.7%), Pasco (38.5%; 95% CI: 36.9-40.0%), Cusco (36.0%; 95% CI: 35.3-36.8%), and Apurímac (32.0%; 95% CI: 30.8-33.1%) had the highest prevalences of anemia. The local Moran Index identified 202 high-priority districts (hot spots) (12.3% of total; 44 urban and 158 rural) located in Ancash, Apurímac, Arequipa, Ayacucho, Cajamarca, Cusco, Huancavelica, Huánuco, Junín, La Libertad, Lima, Pasco, and Puno containing high-prevalence district conglomerates. Gestational anemia in Peru has its highest prevalence rates in rural and southern mountainous areas. The district conglomerates with high prevalence rates of gestational anemia coincide with the areas of high regional prevalence.

Severe anemia in 3 toddlers with gastric lactobezoar.

Science.gov (United States)

Klein-Franke, A; Kropshofer, G; Gassner, I; Meister, B; Salvador, C; Scholl-Bürgi, S; Mueller, T; Heinz-Erian, P

2013-05-01

Anemia in toddlers may result from many disorders including excessive feeding with cow's milk. Another sequel of age-inadequate cow's milk nutrition may be gastric lactobezoar (GLB), a dense lump of coagulated milk and mucus in the stomach. 3 toddlers presented with a history of excessive intake of full cream cow's milk, abdominal distension, vomiting, dehydration, fatigue, marked pallor and tachycardia. Diagnostic imaging revea-led large GLBs as the likely origin of the abdominal symptoms. Laboratory evaluation showed severe anemia with depleted iron stores and signs of protein catabolism. Non-cow's milk-induced causes of anemia including defects of erythropoiesis, hemoglobin structure, RBC-enzymes and blood coagulation, hemolysis, immune disorders, infection, inflammation, extraintestinal hemorrhage, nephropathy were - according to the available data - unlikely to cause the anemia in our patients. Thus their anemia is thought to be due to age-inadequate cow's milk nutrition leading to 1) low intake, decreased absorption/bioavailability and increased intestinal loss of iron, and 2) GLB which induced blood loss following mechanical irritation of the gastric mucosa and vomiting causing high gastric pH and decrease in duodenal iron absorption. The anemia in our patients is due to both exaggerated feeding with cow's milk and adverse effects of GLBs. This hypothesis is supported by the finding that, after erythrocyte transfusion, iron substitution, age-adapted nutrition and GLB-dissolution, the anemia did not recur. We propose to include GLB in the differential diagnosis of anemia in cow's milk fed small children. © Georg Thieme Verlag KG Stuttgart · New York.

An Etiologic Profile of Anemia in 405 Geriatric Patients

Directory of Open Access Journals (Sweden)

Tabea Geisel

2014-01-01

Full Text Available Background. Anemia is a common condition in the elderly and a significant risk factor for increased morbidity and mortality, reducing not only functional capacity and mobility but also quality of life. Currently, few data are available regarding anemia in hospitalized geriatric patients. Our retrospective study investigated epidemiology and causes of anemia in 405 hospitalized geriatric patients. Methods. Data analysis was performed using laboratory parameters determined during routine hospital admission procedures (hemoglobin, ferritin, transferrin saturation, C-reactive protein, vitamin B12, folic acid, and creatinine in addition to medical history and demographics. Results. Anemia affected approximately two-thirds of subjects. Of 386 patients with recorded hemoglobin values, 66.3% were anemic according to WHO criteria, mostly (85.1% in a mild form. Anemia was primarily due to iron deficiency (65%, frequently due to underlying chronic infection (62.1%, or of mixed etiology involving a combination of chronic disease and iron deficiency, with absolute iron deficiency playing a comparatively minor role. Conclusion. Greater awareness of anemia in the elderly is warranted due to its high prevalence and negative effect on outcomes, hospitalization duration, and mortality. Geriatric patients should be routinely screened for anemia and etiological causes of anemia individually assessed to allow timely initiation of appropriate therapy.

Metastable State Diamond Growth and its Applications to Electronic Devices.

Science.gov (United States)

Jeng, David Guang-Kai

Diamond which consists of a dense array of carbon atoms joined by strong covalent bonds and formed into a tetrahedral crystal structure has remarkable mechanical, thermal, optical and electrical properties suitable for many industrial applications. With a proper type of doping, diamond is also an ideal semiconductor for high performance electronic devices. Unfortunately, natural diamond is rare and limited by its size and cost, it is not surprising that people continuously look for a synthetic replacement. It was believed for long time that graphite, another form of carbon, may be converted into diamond under high pressure and temperature. However, the exact condition of conversion was not clear. In 1939, O. I. Leipunsky developed an equilibrium phase diagram between graphite and diamond based on thermodynamic considerations. In the phase diagram, there is a low temperature (below 1000^ circC) and low pressure (below 1 atm) region in which diamond is metastable and graphite is stable, therefore establishes the conditions for the coexistence of the two species. Leipunsky's pioneer work opened the door for diamond synthesis. In 1955, the General Electric company (GE) was able to produce artificial diamond at 55k atm pressure and a temperature of 2000^ circC. Contrary to GE, B. Derjaguin and B. V. Spitzyn in Soviet Union, developed a method of growing diamonds at 1000^circC and at a much lower pressure in 1956. Since then, researchers, particularly in Soviet Union, are continuously looking for methods to grow diamond and diamond film at lower temperatures and pressures with slow but steady progress. It was only in the early 80's that the importance of growing diamond films had attracted the attentions of researchers in the Western world and in Japan. Recent progress in plasma physics and chemical vapor deposition techniques in integrated electronics technology have pushed the diamond growth in its metastable states into a new era. In this research, a microwave plasma

Diamond Detector Technology: Status and Perspectives

CERN Document Server

Reichmann, M; Artuso, M; Bachmair, F; Bäni, L; Bartosik, M; Beacham, J; Beck, H; Bellini, V; Belyaev, V; Bentele, B; Berdermann, E; Bergonzo, P; Bes, A; Brom, J-M; Bruzzi, M; Cerv, M; Chiodini, G; Chren, D; Cindro, V; Claus, G; Collot, J; Cumalat, J; Dabrowski, A; D'Alessandro, R; Dauvergne, D; de Boer, W; Dorfer, C; Dünser, M; Eremin, V; Eusebi, R; Forcolin, G; Forneris, J; Frais-Kölbl, H; Gallin-Martel, L; Gallin-Martel, M L; Gan, K K; Gastal, M; Giroletti, C; Goffe, M; Goldstein, J; Golubev, A; Gorišek, A; Grigoriev, E; Grosse-Knetter, J; Grummer, A; Gui, B; Guthoff, M; Haughton, I; Hiti, B; Hits, D; Hoeferkamp, M; Hofmann, T; Hosslet, J; Hostachy, J-Y; Hügging, F; Hutton, C; Jansen, H; Janssen, J; Kagan, H; Kanxheri, K; Kasieczka, G; Kass, R; Kassel, F; Kis, M; Konovalov, V; Kramberger, G; Kuleshov, S; Lacoste, A; Lagomarsino, S; Lo Giudice, A; Lukosi, E; Maazouzi, C; Mandic, I; Mathieu, C; Menichelli, M; Mikuž, M; Morozzi, A; Moss, J; Mountain, R; Murphy, S; Muškinja, M; Oh, A; Oliviero, P; Passeri, D; Pernegger, H; Perrino, R; Picollo, F; Pomorski, M; Potenza, R; Quadt, A; Re, A; Riley, G; Roe, S; Sanz-Becerra, D A; Scaringella, M; Schaefer, D; Schmidt, C J; Schnetzer, S; Sciortino, S; Scorzoni, A; Seidel, S; Servoli, L; Smith, S; Sopko, B; Sopko, V; Spagnolo, S; Spanier, S; Stenson, K; Stone, R; Sutera, C; Tannenwald, B; Taylor, A; Traeger, M; Tromson, D; Trischuk, W; Tuve, C; Uplegger, L; Velthuis, J; Venturi, N; Vittone, E; Wagner, S; Wallny, R; Wang, J C; Weingarten, J; Weiss, C; Wengler, T; Wermes, N; Yamouni, M; Zavrtanik, M

2018-01-01

The planned upgrade of the LHC to the High-Luminosity-LHC will push the luminosity limits above the original design values. Since the current detectors will not be able to cope with this environment ATLAS and CMS are doing research to find more radiation tolerant technologies for their innermost tracking layers. Chemical Vapour Deposition (CVD) diamond is an excellent candidate for this purpose. Detectors out of this material are already established in the highest irradiation regimes for the beam condition monitors at LHC. The RD42 collaboration is leading an effort to use CVD diamonds also as sensor material for the future tracking detectors. The signal behaviour of highly irradiated diamonds is presented as well as the recent study of the signal dependence on incident particle flux. There is also a recent development towards 3D detectors and especially 3D detectors with a pixel readout based on diamond sensors.

The characteristics of ESR and 3-D TL spectra of diamonds

International Nuclear Information System (INIS)

Liu Shunsheng; Lu Xu; Fu Huifang

2003-01-01

Electron Spin Resonance (ESR) and 3-dimensional Thermoluminescence (3-D TL) spectra of natural diamond, high temperature-high pressure artificial diamond and high temperature-low pressure chemical vapor deposited (CVD) diamond were determined. The characteristics of spectra have been studied. It is found that isolated nitrogen, nitrogen exchange pair and nitrogen atom pair (S=1) are main forms of electron spin resonance nitrogen in natural and high temperature-high pressure artificial diamonds. The spectrum of CVD diamond is sampler, and contains only one peak caused by suspended bond of unsaturated carbon ones. For 3-D TL spectra, natural diamond has two peaks (∼370 nm and ∼510 nm) in 100-200 degree C temperature range, high temperature-high pressure artificial diamond only has ∼370 nm peak, and CVD diamond only has ∼500 nm peak. These characteristics would be useful for the quality inspection and classification of diamonds, as well as for the study of geologic actions associated with natural diamond

Neutron detection at jet using artificial diamond detectors

International Nuclear Information System (INIS)

Pillon, M.; Angelone, M.; Lattanzi, D.; Marinelli, M.; Milani, E.; Tucciarone, A.; Verona-Rinati, G.; Popovichev, S.; Montereali, R.M.; Vincenti, M.A.; Murari, A.

2007-01-01

Artificial diamond neutron detectors recently proved to be promising devices to measure the neutron production on large experimental fusion machines. Diamond detectors are very promising detectors to be used in fusion environment due to their radiation hardness, low sensitivity to gamma rays, fast response and high energy resolution. High quality 'electronic grade' diamond films are produced through microwave chemical vapour deposition (CVD) technique. Two CVD diamond detectors have been installed and operated at joint European torus (JET), Culham Science Centre, UK. One of these detectors was a polycrystalline CVD diamond film; about 12 mm 2 area and 30 μm thickness while the second was a monocrystalline film of about 5 mm 2 area and 20 μm thick. Both diamonds were covered with 2 μm of lithium fluoride (LiF) 95% enriched in 6 Li. The LiF layer works as a neutron-to-charged particle converter so these detectors can measure thermalized neutrons. Their output signals were compared to JET total neutron yield monitors (KN1 diagnostic) realized with a set of uranium fission chambers. Despite their small active volumes the diamond detectors were able to measure total neutron yields with good reliability and stability during the recent JET experimental campaign of 2006

Characterization of diamond amorphized by ion implantation

International Nuclear Information System (INIS)

Allen, W.R.; Lee, E.H.

1992-01-01

Single crystal diamond has been implanted at 1 MeV with 2 x 10 20 Ar/m 2 . Rutherford backscattering spectrometry in a channeled geometry revealed a broad amorphized region underlying a thin, partially crystalline layer. Raman spectroscopy disclosed modifications in the bonding characteristic of the appearance of non-diamond carbon. The complementary nature of the two analysis techniques is demonstrated. The Knoop hardness of the implanted diamond was reduced by implantation

Cytokine overproduction and crosslinker hypersensitivity are unlinked in Fanconi anemia macrophages.

Science.gov (United States)

Garbati, Michael R; Hays, Laura E; Rathbun, R Keaney; Jillette, Nathaniel; Chin, Kathy; Al-Dhalimy, Muhsen; Agarwal, Anupriya; Newell, Amy E Hanlon; Olson, Susan B; Bagby, Grover C

2016-03-01

The Fanconi anemia proteins participate in a canonical pathway that repairs cross-linking agent-induced DNA damage. Cells with inactivated Fanconi anemia genes are universally hypersensitive to such agents. Fanconi anemia-deficient hematopoietic stem cells are also hypersensitive to inflammatory cytokines, and, as importantly, Fanconi anemia macrophages overproduce such cytokines in response to TLR4 and TLR7/8 agonists. We questioned whether TLR-induced DNA damage is the primary cause of aberrantly regulated cytokine production in Fanconi anemia macrophages by quantifying TLR agonist-induced TNF-α production, DNA strand breaks, crosslinker-induced chromosomal breakage, and Fanconi anemia core complex function in Fanconi anemia complementation group C-deficient human and murine macrophages. Although both M1 and M2 polarized Fanconi anemia cells were predictably hypersensitive to mitomycin C, only M1 macrophages overproduced TNF-α in response to TLR-activating signals. DNA damaging agents alone did not induce TNF-α production in the absence of TLR agonists in wild-type or Fanconi anemia macrophages, and mitomycin C did not enhance TLR responses in either normal or Fanconi anemia cells. TLR4 and TLR7/8 activation induced cytokine overproduction in Fanconi anemia macrophages. Also, although TLR4 activation was associated with induced double strand breaks, TLR7/8 activation was not. That DNA strand breaks and chromosome breaks are neither necessary nor sufficient to account for the overproduction of inflammatory cytokines by Fanconi anemia cells suggests that noncanonical anti-inflammatory functions of Fanconi anemia complementation group C contribute to the aberrant macrophage phenotype and suggests that suppression of macrophage/TLR hyperreactivity might prevent cytokine-induced stem cell attrition in Fanconi anemia. © Society for Leukocyte Biology.

The Returns on Investment Grade Diamonds

NARCIS (Netherlands)

Renneboog, L.D.R.

2013-01-01

Abstract: This paper examines the risk-return characteristics of investment grade gems (white diamonds, colored diamonds and other types of gems including sapphires, rubies, and emeralds). The transactions are coming from gem auctions and span the period 1999-2012. Over our time frame, the annual

[Anemia: guidelines comparison].

Science.gov (United States)

Del Vecchio, Lucia

2009-01-01

The development of recombinant human erythropoietin and its introduction into the market in the late 1980s has significantly improved the quality of life of patients with chronic kidney disease (CKD) and reduced the need for blood transfusions. Starting from a cautious target, a progressive increase in the recommended hemoglobin levels has been observed over the years, in parallel with an increase in the obtained levels. This trend has gone together with the publication of findings of observational studies showing a relationship between the increase in hemoglobin levels and a reduction in the mortality risk, with the conduction of clinical trials testing the effects of complete anemia correction, and with the compilation of guidelines on anemia control in CKD patients by scientific societies and organizations. In the last two years, evidence of a possible increase in the mortality risk in those patients who were randomized to high hemoglobin levels has resulted in a decrease in the upper limit of the recommended Hb target to be obtained with erythropoietin stimulating agents (ESA), and consequently in a narrowing of the target range. Comparison of guidelines on anemia control in CKD patients is an interesting starting point to discuss single recommendations, strengthen their importance, or suggest new topics of research to fill up important gaps in knowledge.

Frequency of anemia in chronic psychiatry patients

Directory of Open Access Journals (Sweden)

Korkmaz S

2015-10-01

Full Text Available Sevda Korkmaz,1 Sevler Yildiz,1 Tuba Korucu,1 Burcu Gundogan,1 Zehra Emine Sunbul,1 Hasan Korkmaz,2 Murad Atmaca1 1Department of Psychiatry, 2Department of Cardiology, Faculty of Medicine, Firat University, Elazig, Turkey Purpose: Anemia could cause psychiatric symptoms such as cognitive function disorders and depression or could deteriorate an existing psychiatric condition when it is untreated. The objective of this study is to scrutinize the frequency of anemia in chronic psychiatric patients and the clinical and sociodemographic factors that could affect this frequency.Methods: All inpatients in our clinic who satisfied the study criteria and received treatment between April 2014 and April 2015 were included in this cross-sectional study. Sociodemographic data for 378 patients included in the study and hemoglobin (Hb and hematocrit values observed during their admission to the hospital were recorded in the forms. Male patients with an Hb level of <13 g/dL and nonpregnant female patients with an Hb level of <12 g/dL were considered as anemic.Findings: Axis 1 diagnoses demonstrated that 172 patients had depressive disorder, 51 patients had bipolar disorder, 54 patients had psychotic disorder, 33 patients had conversion disorder, 19 patients had obsessive-compulsive disorder, 25 patients had generalized anxiety disorder, and 24 patients had other psychiatric conditions. It was also determined that 25.4% of the patients suffered from anemia. Thirty-five percent of females and 10% of males were considered as anemic. The frequency of anemia was the highest among psychotic disorder patients (35%, followed by generalized anxiety disorder patients (32%, and obsessive-compulsive disorder patients (26%. Anemia was diagnosed in 22% of depressive disorder patients, 25% of bipolar disorder patients, and 24% of conversion disorder patients.Results: The prevalence of anemia among chronic psychiatry patients is more frequent than the general population

Fabrication of Diamond Based Sensors for Use in Extreme Environments

Directory of Open Access Journals (Sweden)

Gopi K. Samudrala

2015-04-01

Full Text Available Electrical and magnetic sensors can be lithographically fabricated on top of diamond substrates and encapsulated in a protective layer of chemical vapor deposited single crystalline diamond. This process when carried out on single crystal diamond anvils employed in high pressure research is termed as designer diamond anvil fabrication. These designer diamond anvils allow researchers to study electrical and magnetic properties of materials under extreme conditions without any possibility of damaging the sensing elements. We describe a novel method for the fabrication of designer diamond anvils with the use of maskless lithography and chemical vapor deposition in this paper. This method can be utilized to produce diamond based sensors which can function in extreme environments of high pressures, high and low temperatures, corrosive and high radiation conditions. We demonstrate applicability of these diamonds under extreme environments by performing electrical resistance measurements during superconducting transition in rare earth doped iron-based compounds under high pressures to 12 GPa and low temperatures to 10 K.

CN distribution in flame deposition of diamond and its relation to the growth rate, morphology, and nitrogen incorporation of the diamond layer

NARCIS (Netherlands)

Klein-Douwel, R.J.H.; Schermer, J.J.; Meulen, ter J.J.

1998-01-01

Two-dimensional laser-induced fluorescence (2D-LIF) measurements areapplied to the chemical vapour deposition (CVD) of diamond by anoxyacetylene flame to visualize the distribution of CN in the gas phaseduring the diamond growth process. The obtained diamond deposits arecharacterized by optical as

Neutron Detection at JET Using Artificial Diamond Detectors

International Nuclear Information System (INIS)

Pillon, M.; Angelone, M.; Lattanzi, D.; Milani, E.; Tucciarone, A.; Verona-Rinati, G.; Popovichev, S.; Murari, A.

2006-01-01

Three CVD diamond detectors are installed and operated at Joint European Torus, Culham laboratory. Diamond detectors are very promising detectors to be used in fusion environment due to their radiation hardness, gamma discrimination properties, fast response and spectroscopy properties. The aim of this work is to test and qualify artificial diamond detectors as neutron counters and spectrometers on a large fusion device. Two of these detectors are polycrystalline CVD diamond films of thickness 30 mm and 40 mm respectively while the third detector is a monocrystalline CVD of 110 mm thickness. The first polycrystalline diamond is covered with 4 mm of LiF 95 % enriched in 6 Li and enclosed inside a polyethylene moderator cap. This detector is used with a standard electronic chain made with a charge preamplifier, shaping amplifier and threshold discriminator. It is used to measure the time-dependent total neutron yield produced by JET plasma and its signal is compared with JET fission chambers. The second polycrystalline diamond is connected with a fast (1 GHz) preamplifier and a threshold discriminator via a long (about 100 m) double screened cable. This detector is used to detect the 14 MeV neutrons produced by triton burn-up using the reaction 12 C (n, α) 9 Be which occurs in diamond and a proper discriminator threshold. The response of this detector is fast and the electronic is far from the high radiation environment. Its signal is used in comparison with JET silicon diodes. The third monocrystalline diamond is also connected using a standard electronic and is used to demonstrate the feasibility of 14 MeV neutron spectrometry at about 3% peak resolution taking advantage of the spectrometer properties of monocrystalline diamonds. The results obtained are presented in this work. (author)

Tracing the Source of Borneo's Cempaka Diamond Deposit

Science.gov (United States)

White, L. T.; Graham, I.; Armstrong, R. A.; Hall, R.

2014-12-01

Several gem quality diamond deposits are found in paleo-alluvial deposits across Borneo. The source of the diamonds and their origin are enigmatic. They could have formed in Borneo and be derived from local sources, or they could be related to diamond deposits in NW Australia, and carried with the Southwest Borneo Block after it rifted from Australia in the Late Jurassic. We collected U-Pb isotopic data from detrital zircons from the Cempaka alluvial diamond deposit in southeast Borneo. Two thirds of the zircons that were dated crystallized between 75 Ma and 110 Ma. The other third are Triassic or older (223 Ma, 314-319 Ma, 353-367 Ma, 402-414 Ma, 474 Ma, 521 Ma, 549 Ma, 1135-1176 Ma, 1535 Ma, 2716 Ma). All of the Cretaceous zircons are angular, euhedral grains with minor evidence of mechanical abrasion. Considering their age and morphology they were likely derived from the nearby Schwaner Granites. The Triassic and older grains are rounded to semi-rounded and were likely derived from Australia before Borneo rifted from Gondwana. Some of the zircons have ages that resemble those of the Merlin and Argyle diamond deposits of Australia. The diamonds themselves have delicate resorption features and overgrowths that would potentially be destroyed with prolonged transport. Geochemical data collected from the diamonds implies they were associated with lamproite intrusions. Deep seismic lines and zircons from igneous rocks suggest SE Borneo, the East Java Sea and East Java are largely underlain by thick lithosphere rifted from NW Australia. Based on several lines of evidence, we propose that diamond-bearing lamproites intruded before rifting of SW Borneo from Australia, or after collision with Sundaland of SW Borneo and the East Java-West Sulawesi Blocks during the Cretaceous. Exposure of the source after the Late Cretaceous led to diamond accumulation in river systems that flowed from the Schwaner Mountains.

Oral human papillomavirus is common in individuals with Fanconi anemia.

Science.gov (United States)

Sauter, Sharon L; Wells, Susanne I; Zhang, Xue; Hoskins, Elizabeth E; Davies, Stella M; Myers, Kasiani C; Mueller, Robin; Panicker, Gitika; Unger, Elizabeth R; Sivaprasad, Umasundari; Brown, Darron R; Mehta, Parinda A; Butsch Kovacic, Melinda

2015-05-01

Fanconi anemia is a rare genetic disorder resulting in a loss of function of the Fanconi anemia-related DNA repair pathway. Individuals with Fanconi anemia are predisposed to some cancers, including oropharyngeal and gynecologic cancers, with known associations with human papillomavirus (HPV) in the general population. As individuals with Fanconi anemia respond poorly to chemotherapy and radiation, prevention of cancer is critical. To determine whether individuals with Fanconi anemia are particularly susceptible to oral HPV infection, we analyzed survey-based risk factor data and tested DNA isolated from oral rinses from 126 individuals with Fanconi anemia and 162 unaffected first-degree family members for 37 HPV types. Fourteen individuals (11.1%) with Fanconi anemia tested positive, significantly more (P = 0.003) than family members (2.5%). While HPV prevalence was even higher for sexually active individuals with Fanconi anemia (17.7% vs. 2.4% in family; P = 0.003), HPV positivity also tended to be higher in the sexually inactive (8.7% in Fanconi anemia vs. 2.9% in siblings). Indeed, having Fanconi anemia increased HPV positivity 4.9-fold (95% CI, 1.6-15.4) considering age and sexual experience, but did not differ by other potential risk factors. Our studies suggest that oral HPV is more common in individuals with Fanconi anemia. It will be essential to continue to explore associations between risk factors and immune dysfunction on HPV incidence and persistence over time. HPV vaccination should be emphasized in those with Fanconi anemia as a first step to prevent oropharyngeal cancers, although additional studies are needed to determine whether the level of protection it offers in this population is adequate. ©2015 American Association for Cancer Research.

The Student with Sickle Cell Anemia.

Science.gov (United States)

Tetrault, Sylvia M.

1981-01-01

Sickle cell anemia is the most common and severe of inherited chronic blood disorders. In the United States, sickle cell anemia is most common among the Black population. Among the most commonly occurring symptoms are: an enlarged spleen, episodes of severe pain, easily contracted infections, skin ulcers, and frequent urination. (JN)

A novel ubiquitin ligase is deficient in Fanconi anemia.

NARCIS (Netherlands)

Meetei, AR; Winter, de J.P.; Medhurst, A.L. dr.; Wallisch, M; Waisfisz, Q.; Vrugt, van der H.J.; Oostra, A.B.; Yan, Z; Ling, C; Bishop, CE; Hoatlin, M.E.; Joenje, H.

2003-01-01

Fanconi anemia is a recessively inherited disease characterized by congenital defects, bone marrow failure and cancer susceptibility. Cells from individuals with Fanconi anemia are highly sensitive to DNA-crosslinking drugs, such as mitomycin C (MMC). Fanconi anemia proteins function in a DNA damage

Diamond-based single-photon emitters

International Nuclear Information System (INIS)

Aharonovich, I; Castelletto, S; Simpson, D A; Su, C-H; Greentree, A D; Prawer, S

2011-01-01

The exploitation of emerging quantum technologies requires efficient fabrication of key building blocks. Sources of single photons are extremely important across many applications as they can serve as vectors for quantum information-thereby allowing long-range (perhaps even global-scale) quantum states to be made and manipulated for tasks such as quantum communication or distributed quantum computation. At the single-emitter level, quantum sources also afford new possibilities in terms of nanoscopy and bio-marking. Color centers in diamond are prominent candidates to generate and manipulate quantum states of light, as they are a photostable solid-state source of single photons at room temperature. In this review, we discuss the state of the art of diamond-based single-photon emitters and highlight their fabrication methodologies. We present the experimental techniques used to characterize the quantum emitters and discuss their photophysical properties. We outline a number of applications including quantum key distribution, bio-marking and sub-diffraction imaging, where diamond-based single emitters are playing a crucial role. We conclude with a discussion of the main challenges and perspectives for employing diamond emitters in quantum information processing.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... for gastrointestinal bleeding To see if gastrointestinal bleeding is causing your iron-deficiency anemia, your doctor may order the following procedures to guide treatment . Fecal ...

Sickle Cell Anemia: MedlinePlus Health Topic

Science.gov (United States)

... Cell Disease Also called: Hemoglobin SS disease, Sickle cell anemia On this page Basics Summary Start Here Diagnosis ... red blood cells. This is a condition called anemia , and it can make you feel tired. The ...

Diamond detectors for high energy physics experiments

Science.gov (United States)

Bäni, L.; Alexopoulos, A.; Artuso, M.; Bachmair, F.; Bartosik, M.; Beacham, J.; Beck, H.; Bellini, V.; Belyaev, V.; Bentele, B.; Berdermann, E.; Bergonzo, P.; Bes, A.; Brom, J.-M.; Bruzzi, M.; Cerv, M.; Chiodini, G.; Chren, D.; Cindro, V.; Claus, G.; Collot, J.; Cumalat, J.; Dabrowski, A.; D'Alessandro, R.; Dauvergne, D.; de Boer, W.; Dorfer, C.; Dünser, M.; Eremin, V.; Eusebi, R.; Forcolin, G.; Forneris, J.; Frais-Kölbl, H.; Gallin-Martel, L.; Gallin-Martel, M. L.; Gan, K. K.; Gastal, M.; Giroletti, C.; Goffe, M.; Goldstein, J.; Golubev, A.; Gorišek, A.; Grigoriev, E.; Grosse-Knetter, J.; Grummer, A.; Gui, B.; Guthoff, M.; Haughton, I.; Hiti, B.; Hits, D.; Hoeferkamp, M.; Hofmann, T.; Hosslet, J.; Hostachy, J.-Y.; Hügging, F.; Hutton, C.; Jansen, H.; Janssen, J.; Kagan, H.; Kanxheri, K.; Kasieczka, G.; Kass, R.; Kassel, F.; Kis, M.; Konovalov, V.; Kramberger, G.; Kuleshov, S.; Lacoste, A.; Lagomarsino, S.; Lo Giudice, A.; Lukosi, E.; Maazouzi, C.; Mandic, I.; Mathieu, C.; Menichelli, M.; Mikuž, M.; Morozzi, A.; Moss, J.; Mountain, R.; Murphy, S.; Muškinja, M.; Oh, A.; Oliviero, P.; Passeri, D.; Pernegger, H.; Perrino, R.; Picollo, F.; Pomorski, M.; Potenza, R.; Quadt, A.; Re, A.; Reichmann, M.; Riley, G.; Roe, S.; Sanz, D.; Scaringella, M.; Schaefer, D.; Schmidt, C. J.; Schnetzer, S.; Sciortino, S.; Scorzoni, A.; Seidel, S.; Servoli, L.; Smith, S.; Sopko, B.; Sopko, V.; Spagnolo, S.; Spanier, S.; Stenson, K.; Stone, R.; Sutera, C.; Tannenwald, B.; Taylor, A.; Traeger, M.; Tromson, D.; Trischuk, W.; Tuve, C.; Uplegger, L.; Velthuis, J.; Venturi, N.; Vittone, E.; Wagner, S.; Wallny, R.; Wang, J. C.; Weingarten, J.; Weiss, C.; Wengler, T.; Wermes, N.; Yamouni, M.; Zavrtanik, M.

2018-01-01

Beam test results of the radiation tolerance study of chemical vapour deposition (CVD) diamond against different particle species and energies is presented. We also present beam test results on the independence of signal size on incident particle rate in charged particle detectors based on un-irradiated and irradiated poly-crystalline CVD diamond over a range of particle fluxes from 2 kHz/cm2 to 10 MHz/cm2. The pulse height of the sensors was measured with readout electronics with a peaking time of 6 ns. In addition functionality of poly-crystalline CVD diamond 3D devices was demonstrated in beam tests and 3D diamond detectors are shown to be a promising technology for applications in future high luminosity experiments.

NEW HIGH STRENGTH AND FASTER DRILLING TSP DIAMOND CUTTERS

Energy Technology Data Exchange (ETDEWEB)

Robert Radtke

2006-01-31

The manufacture of thermally stable diamond (TSP) cutters for drill bits used in petroleum drilling requires the brazing of two dissimilar materials--TSP diamond and tungsten carbide. The ENDURUS{trademark} thermally stable diamond cutter developed by Technology International, Inc. exhibits (1) high attachment (shear) strength, exceeding 345 MPa (50,000 psi), (2) TSP diamond impact strength increased by 36%, (3) prevents TSP fracture when drilling hard rock, and (4) maintains a sharp edge when drilling hard and abrasive rock. A novel microwave brazing (MWB) method for joining dissimilar materials has been developed. A conventional braze filler metal is combined with microwave heating which minimizes thermal residual stress between materials with dissimilar coefficients of thermal expansion. The process results in preferential heating of the lower thermal expansion diamond material, thus providing the ability to match the thermal expansion of the dissimilar material pair. Methods for brazing with both conventional and exothermic braze filler metals have been developed. Finite element modeling (FEM) assisted in the fabrication of TSP cutters controllable thermal residual stress and high shear attachment strength. Further, a unique cutter design for absorbing shock, the densification of otherwise porous TSP diamond for increased mechanical strength, and diamond ion implantation for increased diamond fracture resistance resulted in successful drill bit tests.

Surface Structure of Aerobically Oxidized Diamond Nanocrystals

Science.gov (United States)

2014-10-27

Diamond. Phys. Rev. Lett. 2000, 84, 5160−5163. (31) Ownby, P. D.; Yang, X.; Liu, J. Calculated X-Ray-Diffraction Data for Diamond Polytypes. J. Am. Ceram...Surfaces from Ab-Initio Calculations . Phys. Rev. B 1995, 51, 14669−14685. (39) Ferrari, A. C.; Robertson, J. Raman Spectroscopy of Amorphous, Nanostructured...Y.; Takami, S.; Kubo , M.; Belosludov, R. V.; Miyamoto, A.; Imamura, A.; Gamo, M. N.; Ando, T. First-Principle Study on Reactions of Diamond (100

High-temperature Infrared Transmission of Free-standing Diamond Films

Directory of Open Access Journals (Sweden)

HEI Li-fu

2017-02-01

Full Text Available The combination of low absorption and extreme mechanical and thermal properties make diamond a compelling choice for some more extreme far infrared (8-12 μm window applications. The optical properties of CVD diamond at elevated temperatures are critical to many of these extreme applications. The infrared transmission of free-standing diamond films prepared by DC arc plasma jet were studied at temperature varied conditions. The surface morphology, structure feature and infrared optical properties of diamond films were tested by optical microscope, X-ray diffraction, laser Raman and Fourier-transform infrared spectroscopy. The results show that the average transmittance for 8-12μm is decreased from 65.95% at 27℃ to 52.5% at 500℃,and the transmittance drop is in three stages. Corresponding to the drop of transmittance with the temperature, diamond film absorption coefficient increases with the rise of temperature. The influence of the change of surface state of diamond films on the optical properties of diamond films is significantly greater than the influence on the internal structure.

P-type diamond stripper foils for tandem ion accelerators

International Nuclear Information System (INIS)

Phelps, A.W.; Koba, R.

1989-01-01

The authors are developing a stripper foil composed of a p-type diamond membrane. This diamond stripper foil should have a significantly longer lifetime than any conventional stripper foil material. To be useful for stripper foils, the boron-doped blue diamond films must be thinner than 0.8 μm and pore-free. Two methods are compared for their ability to achieve a high nucleation areal density on a W substrate. Some W substrates were first coated with think layer of boron (≤20 nm) in order to enhance nucleation. Other W substrates were scratched with submicron diamond particles. A schematic diagram of the stripper foil is shown. Stripper foils were created by etching away the central area of W substrates. The diamond membrane was then supported by an annulus of W. Tungsten was selected as a ring-support material because of its high electrical and thermal conductivity, relatively low thermal expansion, and proven suitability as a substrate for diamond CVD. Warping or fracture of the diamond film after substrate etch-back was investigated

Nanofocusing optics for synchrotron radiation made from polycrystalline diamond.

Science.gov (United States)

Fox, O J L; Alianelli, L; Malik, A M; Pape, I; May, P W; Sawhney, K J S

2014-04-07

Diamond possesses many extreme properties that make it an ideal material for fabricating nanofocusing x-ray optics. Refractive lenses made from diamond are able to focus x-ray radiation with high efficiency but without compromising the brilliance of the beam. Electron-beam lithography and deep reactive-ion etching of silicon substrates have been used in a transfer-molding technique to fabricate diamond optics with vertical and smooth sidewalls. Latest generation compound refractive lenses have seen an improvement in the quality and uniformity of the optical structures, resulting in an increase in their focusing ability. Synchrotron beamline tests of two recent lens arrays, corresponding to two different diamond morphologies, are described. Focal line-widths down to 210 nm, using a nanocrystalline diamond lens array and a beam energy of E = 11 keV, and 230 nm, using a microcrystalline diamond lens at E = 15 keV, have been measured using the Diamond Light Source Ltd. B16 beamline. This focusing prowess is combined with relatively high transmission through the lenses compared with silicon refractive designs and other diffractive optics.

Alluvial diamond resource potential and production capacity assessment of Mali

Science.gov (United States)

Chirico, Peter G.; Barthelemy, Francis; Kone, Fatiaga

2010-01-01

In May of 2000, a meeting was convened in Kimberley, South Africa, and attended by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that rough, exported diamonds were free of conflictual concerns. This meeting was supported later in 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by diamond-producing and diamond-importing countries. Over 70 countries were included as members of the KPCS at the end of 2007. To prevent trade in "conflict diamonds" while protecting legitimate trade, the KPCS requires that each country set up an internal system of controls to prevent conflict diamonds from entering any imported or exported shipments of rough diamonds. Every diamond or diamond shipment must be accompanied by a Kimberley Process (KP) certificate and be contained in tamper-proof packaging. The objective of this study was (1) to assess the naturally occurring endowment of diamonds in Mali (potential resources) based on geological evidence, previous studies, and recent field data and (2) to assess the diamond-production capacity and measure the intensity of mining activity. Several possible methods can be used to estimate the potential diamond resource. However, because there is generally a lack of sufficient and consistent data recording all diamond mining in Mali and because time to conduct fieldwork and accessibility to the diamond mining areas are limited, four different methodologies were used: the cylindrical calculation of the primary kimberlitic deposits, the surface area methodology, the volume and grade approach, and the content per kilometer approach. Approximately 700,000 carats are estimated to be in the alluvial deposits of the Kenieba region, with 540,000 carats calculated to lie within the concentration grade deposits. Additionally, 580,000 carats are estimated to have

CVD diamond for nuclear detection applications

CERN Document Server

Bergonzo, P; Tromson, D; Mer, C; Guizard, B; Marshall, R D; Foulon, F

2002-01-01

Chemically vapour deposited (CVD) diamond is a remarkable material for the fabrication of radiation detectors. In fact, there exist several applications where other standard semiconductor detectors do not fulfil the specific requirements imposed by corrosive, hot and/or high radiation dose environments. The improvement of the electronic properties of CVD diamond has been under intensive investigations and led to the development of a few applications that are addressing specific industrial needs. Here, we report on CVD diamond-based detector developments and we describe how this material, even though of a polycrystalline nature, is readily of great interest for applications in the nuclear industry as well as for physics experiments. Improvements in the material synthesis as well as on device fabrication especially concern the synthesis of films that do not exhibit space charge build up effects which are often encountered in CVD diamond materials and that are highly detrimental for detection devices. On a pre-i...

Single-layer nano-carbon film, diamond film, and diamond/nano-carbon composite film field emission performance comparison

International Nuclear Information System (INIS)

Wang, Xiaoping; Wang, Jinye; Wang, Lijun

2016-01-01

A series of single-layer nano-carbon (SNC) films, diamond films, and diamond/nano-carbon (D/NC) composite films have been prepared on the highly doped silicon substrate by using microwave plasma chemical vapor deposition techniques. The films were characterised by scanning electron microscopy, Raman spectroscopy, and field emission I-V measurements. The experimental results indicated that the field emission maximum current density of D/NC composite films is 11.8–17.8 times that of diamond films. And the field emission current density of D/NC composite films is 2.9–5 times that of SNC films at an electric field of 3.0 V/μm. At the same time, the D/NC composite film exhibits the advantage of improved reproducibility and long term stability (both of the nano-carbon film within the D/NC composite cathode and the SNC cathode were prepared under the same experimental conditions). And for the D/NC composite sample, a high current density of 10 mA/cm"2 at an electric field of 3.0 V/μm was obtained. Diamond layer can effectively improve the field emission characteristics of nano-carbon film. The reason may be due to the diamond film acts as the electron acceleration layer.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... Supplement Fact Sheet (NIH) Iron-Deficiency Anemia (National Library of Medicine, MedlinePlus) ... Privacy Policy Freedom of Information Act (FOIA) Accessibility Copyright and Usage No FEAR ...

Epidemiology of aplastic anemia in Japanese radiological technicians

International Nuclear Information System (INIS)

Kitabatake, Takashi; Watanabe, Tsuyoshi; Saito, Akira; Nakamura, Minoru.

1976-01-01

Among Japanese radiological technicians, four deaths from aplastic anemia have been recorded. Based on this fact, some epidemiological considerations are tried. During the period from 1930 to 1960, the population of radiological technicians is estimated to be 74,400 man-years, in which 0.5 aplastic anemias are expected. However actually three died from aplastic anemia. This difference is statistically significant at the 1% level. On the other hand, in the period from 1961 to 1973, the observed value is 1 against 0.7 expected. It is concluded that aplastic anemia had been frequently induced among Japanese radiological technicians in the era when there was much exposure to occupational radiation. (auth.)

Aplastic anemia and related disorders in atomic bomb survivors

International Nuclear Information System (INIS)

Ichimaru, Michito; Tomonaga, Yu; Matsunaga, Masako; Sadamori, Naoki; Ishimaru, Toranosuke.

1978-01-01

Whether the incidence of aplastic anemia significantly increases due to the later effect of atomic-bomb radiation was studied. After the data of aplastic anemia which occurred within 1950 - 1973 were evaluated and the diagnoses of the cases were certified, the incidence of aplastic anemia per 109,000 inhabitants of the cities of Hiroshima and Nagasaki was calculated and compared according to the dose of atomic-bomb radiation. There was no increase in the incidence according to an increase in radiation dose, and there was no fact that aplastic anemia increased in a certain period either. Most of the atomic-bomb survivors who were close to the epicenter and were clinically diagnosed as aplastic anemia had leukemia lesion or myeloid proliferating lesion, and it is likely to be that pathological changes resembling aplastic anemia may appear in a certain phase of myeloid proliferation or as a phenotype of myeloid proliferation. An evaluation was made on cases of aplastic anemia of other groups, but the doses of atomic-bomb radiation which they received were not so much to give effect on the bone marrow except only two cases. (Ueda, J.)

Atomic structure-colour relationship in natural diamonds

International Nuclear Information System (INIS)

Godfrey, I S; Bangert, U

2010-01-01

Colour is a physical attribute that can be very difficult to characterise in diamond and consequently it receives regular attention from scientists working in the gem industry. In this work we compare natural brown (the most common colour) and colourless type IIa diamonds containing only trace quantities (< 1 at. ppm) of nitrogen. Numerous attempts have been made to trace the origin of brown tints in natural diamond, with the most likely culprits, i.e. dislocations and nitrogen impurities, ruled out through the application of various analytical techniques. Consequently more emphasis has recently been placed on the study of smaller defects in the diamond structure and their influence on colour. The focus of this research work is the analysis of vacancy defects having a size of the order of 1nm using aberration corrected scanning transmission electron microscopy (AC-STEM). The small electron probe size and depth of focus afforded by this technique allows such defect structures together with their position to be resolved far more readily than with conventional HR-TEM. Small-scale contrast variations are apparent in the lattice images of brown and not of colourless diamonds. These features have been compared to simulated phase contrast images of vacancy clusters in diamond. In addition, both experimental and simulated defocus series indicate that such features are not restricted to the surface of the specimen.

Bending diamonds by femtosecond laser ablation

DEFF Research Database (Denmark)

Balling, Peter; Esberg, Jakob; Kirsebom, Kim

2009-01-01

We present a new method based on femtosecond laser ablation for the fabrication of statically bent diamond crystals. Using this method, curvature radii of 1 m can easily be achieved, and the curvature obtained is very uniform. Since diamond is extremely tolerant to high radiation doses, partly due...

FAKTOR-FAKTOR YANG MEMPENGARUHI ANEMIA PADA REMAJA

Directory of Open Access Journals (Sweden)

Dewi Permaesih

2012-09-01

Full Text Available Anemia in Indonesia is a public health problem. The prevalence still have a tendency to increase. The main antecedent factor for anemia is the lack of iron intake. The purpose of this analysis is to learn and find other factors besides iron. Sources of data were from the study of morbidity and disability of the Household Health Survey, 2001. The respondents were adolescents between 10-19 years of age. Data on social economic status, illness records, medicine consumption, physical activities and smoking habits were collected by interview during household visits. Data on anemia were identified from the results of hemoglobin determination by HemoCue. The nutrition status was found from the calculation of Body Mass Index. Data on energy consumption were taken from food expenditure for meal data from SUSENAS. Variable used for the purpose of this analysis were age, gender, smoking habit, alcohol drinking, breakfast, the use of time for physical activities, IMT, hemoglobin value and energy consumption. Data analyse were conducted in 3 stages,i.e., univariate, bivariate and multivariate analyse. Overall, the prevalence of anemia among adolescents was found to be 25.5%; 21% for adolescent boys and 30% for adolescent girls. Around 27.1% adolescents reside in the village and 22.6% in the city. Adolescents who consume > 70% energy from being suggested were around 38% respondents. Seventeen percent was classified as thinny adolescent based on IMT indicator. The result on bivariate analyse showed that respondents who were less educated have a significant relation (p < 0.05 with getting anemia (OR=3.8; 95% CI=1.9-7.2. Male adolescents have lower risk to get anemia (OR=0.6; 95% CI 0.5-7.3. Other variables that showed significant relation with anemia were smoking (OR 1.35; 95% CI 1-1.8, breakfast habit (OR 0.6 ;95% CI 0.4-0.9 and sufficient energy consumption (OR 0.7; 95% CI 0.6-0.9. Result of multiple regression logistic test indicate that variables related

Iron deficiency and anemia in heart failure.

Science.gov (United States)

Çavuşoğlu, Yüksel; Altay, Hakan; Çetiner, Mustafa; Güvenç, Tolga Sinan; Temizhan, Ahmet; Ural, Dilek; Yeşilbursa, Dilek; Yıldırım, Nesligül; Yılmaz, Mehmet Birhan

2017-03-01

Heart failure is an important community health problem. Prevalence and incidence of heart failure have continued to rise over the years. Despite recent advances in heart failure therapy, prognosis is still poor, rehospitalization rate is very high, and quality of life is worse. Co-morbidities in heart failure have negative impact on clinical course of the disease, further impair prognosis, and add difficulties to treatment of clinical picture. Therefore, successful management of co-morbidities is strongly recommended in addition to conventional therapy for heart failure. One of the most common co-morbidities in heart failure is presence of iron deficiency and anemia. Current evidence suggests that iron deficiency and anemia are more prevalent in patients with heart failure and reduced ejection fraction, as well as those with heart failure and preserved ejection fraction. Moreover, iron deficiency and anemia are referred to as independent predictors for poor prognosis in heart failure. There is strong relationship between iron deficiency or anemia and severity of clinical status of heart failure. Over the last two decades, many clinical investigations have been conducted on clinical effectiveness of treatment of iron deficiency or anemia with oral iron, intravenous iron, and erythropoietin therapies. Studies with oral iron and erythropoietin therapies did not provide any clinical benefit and, in fact, these therapies have been shown to be associated with increase in adverse clinical outcomes. However, clinical trials in patients with iron deficiency in the presence or absence of anemia have demonstrated considerable clinical benefits of intravenous iron therapy, and based on these positive outcomes, iron deficiency has become target of therapy in management of heart failure. The present report assesses current approaches to iron deficiency and anemia in heart failure in light of recent evidence.

High vacuum tribology of polycrystalline diamond coatings

Indian Academy of Sciences (India)

Polycrystalline diamond coatings; hot filament CVD; high vacuum tribology. 1. Introduction .... is a characteristic of graphite. We mark the (diamond ... coefficient of friction due to changes in substrate temperature. The average coefficient of.

Severe combined immunodeficiency (SCID) presenting with neonatal aplastic anemia.

Science.gov (United States)

Scott, Angela; Glover, Jason; Skoda-Smith, Suzanne; Torgerson, Troy R; Xu, Min; Burroughs, Lauri M; Woolfrey, Ann E; Fleming, Mark D; Shimamura, Akiko

2015-11-01

Aplastic anemia in the neonate is rare. We report a case of severe combined immunodeficiency (SCID) presenting with neonatal aplastic anemia. This report highlights the importance of considering SCID early in the evaluation of neonatal aplastic anemia prior to the development of infectious complications. © 2015 Wiley Periodicals, Inc.

Anemia: monosymptomatic celiac disease. A report of 3 cases

NARCIS (Netherlands)

Depla, A. C.; Bartelsman, J. F.; Mulder, C. J.; Tytgat, G. N.

1990-01-01

Patients with monosymptomatic celiac disease (CD) can escape diagnosis for a long period. Anemia is a common finding in CD, although anemia as the sole symptom is relatively unknown. We report on three patients who presented with iron deficiency anemia and no other symptom, in whom CD was considered

The processing of heteroepitaxial thin-film diamond for electronic applications

International Nuclear Information System (INIS)

McGrath, J.

1998-09-01

Thin film diamond is of particular interest because of its wide applicability, including its potential use in high temperature electronics. This thesis describes a study of some of the processing stages required to exploit thin film diamond as an electronic device. Initial experiments were carried out to optimise bi-metallic contact schemes on orientated diamond film using electrical measurements and chemical analysis. Temperature stability was also investigated and it was concluded that the most favourable ohmic contact scheme is aluminium-on-titanium. Further electrical measurements confirmed that the contribution of resistance made by the contacts themselves to the metal/diamond/metal system overall was acceptably low, specifically 6 Ω.cm 2 for an undoped diamond system and less than 3 x 10 -6 Ω.cm 2 for boron doped diamond. To improve the as-grown resistivity of diamond films, an oxygen/argon plasma etch process was applied. The input parameters of the plasma system were optimised to give the maximum achievable resistivity of 4 x 10 11 Ω.cm. This was attained using a statistical design procedure via analysis of resistivity and etch rate outputs. Having optimised post growth treatment and contact metallisation, undoped and doped orientated diamond films were characterised via voltage and temperature dependencies. It was concluded that the dominant charge transport mechanisms for undoped diamond, nitrogen and boron doped diamond were variable range hopping at low temperatures up to 523 K and grain boundary effects. At higher temperatures, valence or impurity band conduction appeared to be the probable mechanisms with activation energies of 0.23 eV for nitrogen doped diamond and 0.08 eV for boron doped diamond. Preliminary experiments electrical properties of diamond and initial results suggested the presence of a high density of recombination centres. The final stage of experimental research initiated a study of direct electron beam writing lithography to

Diamond deposition on siliconized stainless steel

International Nuclear Information System (INIS)

Alvarez, F.; Reinoso, M.; Huck, H.; Rosenbusch, M.

2010-01-01

Silicon diffusion layers in AISI 304 and AISI 316 type stainless steels were investigated as an alternative to surface barrier coatings for diamond film growth. Uniform 2 μm thick silicon rich interlayers were obtained by coating the surface of the steels with silicon and performing diffusion treatments at 800 deg. C. Adherent diamond films with low sp 2 carbon content were deposited on the diffused silicon layers by a modified hot filament assisted chemical vapor deposition (HFCVD) method. Characterization of as-siliconized layers and diamond coatings was performed by energy dispersive X-ray analysis, scanning electron microscopy, X-ray diffraction and Raman spectroscopy.

Data science implications in diamond formation and craton evolution

Science.gov (United States)

Pan, F.; Huang, F.; Fox, P. A.

2017-12-01

Diamonds are so-called "messengers" from the deep Earth. Fluid and mineral inclusions in diamonds could reflect the compositions of fluids/melts and wall-rocks in which diamond formed. Recently many diamond samples are examined to study the water content in the mantle transition zone1, the mechanism of diamond formation2 and the mantle evolution history3. However, most of the studies can only explain local activities. Therefore, an overall project of data grouping, comparison and correlation is needed, but limited progress has been made due to a lack of benchmark datasets on diamond formation and effective computing algorithms. In this study, we start by proposing the very first complete and easily-accessible dataset on mineral and fluid inclusions in diamonds. We rescue, collect and organize the data available from papers, journals and other publications resources ([2-4] and more), and then apply several state-of-the-art machine learning methods to tackle this earth science problem by clustering diamond formation process into distinct groups primarily based on the compositions, the formation temperature and pressure, the age and so on. Our ongoing work includes further data exploration and training existing models. Our preliminary results show that diamonds formed from older cratons usually have higher formation temperature. Also peridotitic diamonds take a much larger population than the ecologitic ones. More details are being discovered when we finish constructing the database and training our model. We expect the result to demonstrate the advantages of using machine learning and data science in earth science research problems. Our methodology for knowledge discovery are very general and can be broadly applied to other earth science research problems under the same framework.[1] Pearson et al, Nature (2014); [2] Tomlinson et al, EPSL (2006); [3] Weiss et al, Nature (2016); [4] Stachel and Harris, Ore Geology Reviews (2008); Weiss et al, EPSL (2013)

Light volatiles in diamond: Physical interpretation and genetic significance

International Nuclear Information System (INIS)

Sellschop, J.P.F.; Madiba, C.C.P.; Annegarn, H.J.

1980-01-01

Natural diamond is characterised in terms of features in the infra-red and ultra-violet spectra. Additionally electron spin resonance, X-ray diffraction and topography, cathodoluminescence, mechanical and electrical measurements have been used to give more detail to such specification. It had been concluded that the major impurity in diamond was nitrogen and hence most physical phenomena have been interpreted as a manifestation of the mode(s) of occurence of nitrogen. From neutron activation analysis studies some 58 elements have been identified in diamond, many of course at trace levels. It has been shown that these data reveal a distinctive trace and minor element chemistry for diamond. Recently ion beam analyses have quantified the role of nitrogen in diamond characterisation. Most recently ion beam analysis has revealed that hydrogen, nitrogen and oxygen are all major impurities in diamond. Quantitative studies have been made using ( 19 Fe,α), (α,n) and ( 3 He,p) reactions. High temperature annealing in ultra-high vacuum conditions results in a substantial increase in the hydrogen measured as well as in the shape of the depth profile. Hydrogen is released from defect centres and diffuses rapidly through the diamond. Some of these hydrogen atoms are trapped at defect sites which are concentrated near surface as a result of the ion beam bombardement. A lesser response to the annealing treatment is found for oxygen and the smallest change for nitrogen. These ion beam data lend independent support to our earlier interpretation of the neutron activation data that all diamonds contain defects distributed fairly uniformly and consisting of sub-microscopic inclusions, the elemental composition of which suggests that each is a magma droplet from the upper mantle in which the diamond crystallized. The water-richness of the magma is an essential feature of the diamond genesis conditions. (orig.)

Cell adhesion and growth on ultrananocrystalline diamond and diamond-like carbon films after different surface modifications

Czech Academy of Sciences Publication Activity Database

Mikšovský, Jan; Voss, A.; Kozarova, R.; Kocourek, Tomáš; Písařík, Petr; Ceccone, G.; Kulisch, W.; Jelínek, Miroslav; Apostolova, M.D.; Reithmaier, J.P.; Popov, C.

2014-01-01

Roč. 297, APR (2014), s. 95-102 ISSN 0169-4332 R&D Projects: GA MŠk LD12069 Institutional support: RVO:68378271 Keywords : ultrananocrystalline diamond films * diamond -like carbon films * surface modification * direct contact cell tests Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.711, year: 2014 http://www.sciencedirect.com/science/article/pii/S0169433214001251

Observação de anemia hemolítica auto-imune em artrite reumatóide Observation of autoimmune hemolytic anemia in rheumatoid arthritis

Directory of Open Access Journals (Sweden)

Ricardo A. S. Souza

2003-01-01

Full Text Available Artrite reumatóide é uma doença difusa do tecido conjuntivo que se caracteriza pelo acometimento articular e sistêmico. Disfunções hematológicas como anemia ocorrem em até 65% dos pacientes, sendo a anemia das doenças crônicas a forma mais comum. A anemia hemolítica auto-imune pode estar associada à difusa do tecido conjuntivo, sendo classicamente associada ao lúpus eritematoso sistêmico e fazendo parte dos seus critérios de classificação. A presença de anemia hemolítica auto-imune em artrite reumatóide é relatada raramente na literatura e os mecanismos etiopatogênicos para o seu desenvolvimento ainda não estão esclarecidos. Descrevemos um caso de artrite reumatóide no adulto e outro de artrite reumatóide juvenil que desenvolveram anemia hemolítica auto-imune e discutimos os prováveis mecanismos etiopatogênicos envolvidos.Rheumatoid arthritis is a connective tissue disease characterized by articular and systemic involvement. Hematological abnormalities such as anemia may occur in up to 65% of the patients, with chronic disease anemia being the commonest form. Autoimmune hemolytic anemia can be associated with different connective tissue diseases, particularly systemic lupus erythematosus and it is part of its classification criteria. On the other hand, the presence of autoimmune hemolytic anemia in rheumatoid arthritis has rarely been described in the literature and the pathogenic mechanisms for its development remain unclear. We describe here a case of rheumatoid arthritis and another of juvenile rheumatoid arthritis that developed to autoimmune hemolytic anemia and present the probable etiopathogenic mechanisms.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... Learn more about participating in a clinical trial . View all trials from ClinicalTrials.gov . Visit Children and Clinical ... Resources NHLBI resources Your Guide to Anemia [PDF, 1. ...

Influence of the microstructure of a diamond-containing composite material on the tool cutting ability when grinding a diamond single crystal

Directory of Open Access Journals (Sweden)

A.M. Kuzei

2017-12-01

Full Text Available Using the methods of electronic scanning microstructure and X-ray analysis, the influence of the structure of diamond-containing composite materials on the cutting ability of the tool for circular grinding of diamond single crystals has been studied. It is shown that the use of an oxide-hydroxide glass with a spreading temperature of 570–590 K as a precursor of the binder leads to the formation of melt films on the surface of silicon carbide and diamond particles at 600–630 K and the glass content in the batch is 10 vol. %. The conversion of oxidehydroxide glass films to oxide films proceeds at 700–775 K during the sintering of the composite material. Depending on the volume content of the glass in the charge, the porosity of the compact, three types of structure of composite materials are distinguished: a volumetric skeleton of glass-clad diamond particles and silicon carbide with pores at the sites of multiple compounds; a frame made of glass-clad diamond particles and silicon carbide with glass pores in places of multiple connections; a matrix of glass and the particles of diamond, silicon carbide and pores located in it. The maximum cutting ability of the tool for circular grinding of diamond is provided by a composite material with a structure of the first type.

Ion channelling in diamond

International Nuclear Information System (INIS)

Derry, T.E.

1978-06-01

Diamond is one of the most extreme cases from a channelling point of view, having the smallest thermal vibration amplitude and the lowest atomic number of commonly-encountered crystals. These are the two parameters most important for determining channelling behaviour. It is of consiberable interest therefore to see how well the theories explaining and predicting the channeling properties of other substance, succeed with diamond. Natural diamond, although the best available form for these experiments, is rather variable in its physical properties. Part of the project was devoted to considering and solving the problem of obtaining reproducible results representative of the ideal crystal. Channelling studies were performed on several good crystals, using the Rutherford backscattering method. Critical angles for proton channelling were measured for incident energies from 0.6 to 4.5 MeV, in the three most open axes and three most open planes of the diamond structure, and for α-particle channelling at 0.7 and 1.0 MeV (He + ) in the same axes and planes. For 1.0 MeV protons, the crystal temperature was varied from 20 degrees Celsius to 700 degrees Celsius. The results are presented as curves of backscattered yield versus angle in the region of each axis or plane, and summarised in the form of tables and graphs. Generally the critical angles, axial minimum yields, and temperature dependence are well predicted by the accepted theories. The most valuable overall conclusion is that the mean thermal vibration amplitude of the atoms in a crytical determines the critical approach distance to the channel walls at which an ion can remain channelled, even when this distance is much smaller than the Thomas-Fermi screening distance of the atomic potential, as is the case in diamond. A brief study was made of the radiation damage caused by α-particle bombardment, via its effect on the channelling phenomenon. It was possible to hold damage down to negligible levels during the

Prevalence and risk factors of anemia in children

Directory of Open Access Journals (Sweden)

Cristie Regine Klotz Zuffo

2016-07-01

Full Text Available Objective: To identify the prevalence and factors associated with anemia in children attending Municipal Early Childhood Education Day Care Center (Centros Municipais de Educação Infantil [CMEI] nurseries in Colombo-PR. Methods: Analytical, cross-sectional study with a representative sample of 334 children obtained by stratified cluster sampling, with random selection of 26 nurseries. Data collection was conducted through interviews with parents, assessment of iron intake by direct food weighing, and hemoglobin measurement using the finger-stick test. Bivariate association tests were performed followed by multiple logistic regression adjustment. Results: The prevalence of anemia was 34.7%. Factors associated with anemia were: maternal age younger than 28 years old (p = 0.03, male children (p = 0.02, children younger than 24 months (p = 0.01, and children who did not consume iron food sources (meat + beans + dark green leafy vegetables (p = 0.02. There was no association between anemia and iron food intake in CMEI. However, iron intake was well below the recommended levels according to the National Education Development Fund resolution, higher prevalence of anemia was observed in children whose intake of iron, heme iron, and nonheme iron was below the median. Conclusions: In terms of public health, the prevalence of anemia is characterized as a moderate problem in the studied population and demonstrates the need for coordination of interdisciplinary actions for its reduction in CMEI nurseries. Resumo: Objetivo: Identificar a prevalência e os fatores associados à anemia em crianças que frequentam berçários de Centros Municipais de Educação Infantil (CMEI de Colombo-PR. Métodos: Estudo analítico, de caráter transversal, com amostra representativa de 334 crianças obtida por amostragem estratificada por conglomerados, com seleção aleatória de 26 berçários. A coleta de dados foi realizada por meio de entrevista com os

Hematocrit, anemia, and arm preference for blood sample collection ...

African Journals Online (AJOL)

Background: Anemia in pregnancy is a common cause of maternal morbidity and mortality in developing countries. Regular review of hematocrit (HCT) and anemia patterns in pregnancy is necessary in our environment. Aim: The aim was to determine the average HCT, prevalence, and pattern of anemia, as well the arm ...

Boron-doped diamond electrode: synthesis, characterization, functionalization and analytical applications.

Science.gov (United States)

Luong, John H T; Male, Keith B; Glennon, Jeremy D

2009-10-01

In recent years, conductive diamond electrodes for electrochemical applications have been a major focus of research and development. The impetus behind such endeavors could be attributed to their wide potential window, low background current, chemical inertness, and mechanical durability. Several analytes can be oxidized by conducting diamond compared to other carbon-based materials before the breakdown of water in aqueous electrolytes. This is important for detecting and/or identifying species in solution since oxygen and hydrogen evolution do not interfere with the analysis. Thus, conductive diamond electrodes take electrochemical detection into new areas and extend their usefulness to analytes which are not feasible with conventional electrode materials. Different types of diamond electrodes, polycrystalline, microcrystalline, nanocrystalline and ultrananocrystalline, have been synthesized and characterized. Of particular interest is the synthesis of boron-doped diamond (BDD) films by chemical vapor deposition on various substrates. In the tetrahedral diamond lattice, each carbon atom is covalently bonded to its neighbors forming an extremely robust crystalline structure. Some carbon atoms in the lattice are substituted with boron to provide electrical conductivity. Modification strategies of doped diamond electrodes with metallic nanoparticles and/or electropolymerized films are of importance to impart novel characteristics or to improve the performance of diamond electrodes. Biofunctionalization of diamond films is also feasible to foster several useful bioanalytical applications. A plethora of opportunities for nanoscale analytical devices based on conducting diamond is anticipated in the very near future.

The Effects of Anemia on Pregnancy Outcome in Patients with Pyelonephritis

Directory of Open Access Journals (Sweden)

Sarah K. Dotters-Katz

2013-01-01

Full Text Available Objective. Pyelonephritis is a common infectious morbidity of pregnancy. Though anemia is commonly associated with pyelonephritis, there are little data describing the effect of pyelonephritis with anemia on pregnancy outcomes. The purpose of this study was to further assess the association of anemia with infectious morbidity and pregnancy complications among women with pyelonephritis. Study Design. We conducted a retrospective cohort study of pregnant women admitted to Duke University Hospital between July 2006 and May 2012 with pyelonephritis. Demographic, laboratory, and clinical data from the subject’s pregnancy and hospitalizations were analyzed. Patients with pyelonephritis and anemia (a hematocrit < 32 were compared to those without anemia. Descriptive statistics were used to compare the two groups. Results. 114 pregnant women were admitted with pyelonephritis and 45 (39.5% had anemia on admission. There was no significant difference in age, race, preexisting medical conditions, or urine bacterial species between patients with anemia and those without. Women with anemia were more likely to deliver preterm (OR 3.3 (95% CI 1.07, 11.4, . When controlling for race and history of preterm delivery, women with anemia continued to have increased odds of preterm birth (OR 6.0, CI 1.4, 35, . Conclusion. Women with pyelonephritis and anemia are at increased risk for preterm delivery.

High Heat Load Diamond Monochromator Project at ESRF

International Nuclear Information System (INIS)

Van aerenbergh, P.; Detlefs, C.; Haertwig, J.; Lafford, T. A.; Masiello, F.; Roth, T.; Schmid, W.; Wattecamps, P.; Zhang, L.

2010-01-01

Due to its outstanding thermal properties, diamond is an attractive alternative to silicon as a monochromator material for high intensity X-ray beams. To date, however, the practical applications have been limited by the small size and relatively poor crystallographic quality of the crystals available. The ESRF Diamond Project Group has studied the perfection of diamonds in collaboration with industry and universities. The group has also designed and tested different stress-free mounting techniques to integrate small diamonds into larger X-ray optical elements. We now propose to develop a water-cooled Bragg-Bragg double crystal monochromator using diamond (111) crystals. It will be installed on the ESRF undulator beamline, ID06, for testing under high heat load. This monochromator will be best suited for the low energy range, typically from ∼3.4 keV to 15 keV, due to the small size of the diamonds available and the size of the beam footprint. This paper presents stress-free mounting techniques studied using X-ray diffraction imaging, and their thermal-mechanical analysis by finite element modelling, as well as the status of the ID06 monochromator project.

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... making new blood cells. Visit our Aplastic Anemia Health Topic to learn more. Read ... to review family history, lifestyle, unhealthy environments, or other factors that increase your risk of ...

Iron-Deficiency Anemia

Medline Plus

Full Text Available ... complications, including heart failure and development delays in children. Explore this Health ... red blood cells. Iron-deficiency anemia usually develops over time because your body’s intake of iron ...

Immune hemolytic anemia

Science.gov (United States)

... intravenous immunoglobulin (IVIG) or removal of the spleen (splenectomy) may be considered. You may receive treatment to ... need special treatment. In most people, steroids or splenectomy can totally or partially control anemia.

Temperature dependent simulation of diamond depleted Schottky PIN diodes

International Nuclear Information System (INIS)

Hathwar, Raghuraj; Dutta, Maitreya; Chowdhury, Srabanti; Goodnick, Stephen M.; Koeck, Franz A. M.; Nemanich, Robert J.

2016-01-01

Diamond is considered as an ideal material for high field and high power devices due to its high breakdown field, high lightly doped carrier mobility, and high thermal conductivity. The modeling and simulation of diamond devices are therefore important to predict the performances of diamond based devices. In this context, we use Silvaco ® Atlas, a drift-diffusion based commercial software, to model diamond based power devices. The models used in Atlas were modified to account for both variable range and nearest neighbor hopping transport in the impurity bands associated with high activation energies for boron doped and phosphorus doped diamond. The models were fit to experimentally reported resistivity data over a wide range of doping concentrations and temperatures. We compare to recent data on depleted diamond Schottky PIN diodes demonstrating low turn-on voltages and high reverse breakdown voltages, which could be useful for high power rectifying applications due to the low turn-on voltage enabling high forward current densities. Three dimensional simulations of the depleted Schottky PIN diamond devices were performed and the results are verified with experimental data at different operating temperatures

Temperature dependent simulation of diamond depleted Schottky PIN diodes

Science.gov (United States)

Hathwar, Raghuraj; Dutta, Maitreya; Koeck, Franz A. M.; Nemanich, Robert J.; Chowdhury, Srabanti; Goodnick, Stephen M.

2016-06-01

Diamond is considered as an ideal material for high field and high power devices due to its high breakdown field, high lightly doped carrier mobility, and high thermal conductivity. The modeling and simulation of diamond devices are therefore important to predict the performances of diamond based devices. In this context, we use Silvaco® Atlas, a drift-diffusion based commercial software, to model diamond based power devices. The models used in Atlas were modified to account for both variable range and nearest neighbor hopping transport in the impurity bands associated with high activation energies for boron doped and phosphorus doped diamond. The models were fit to experimentally reported resistivity data over a wide range of doping concentrations and temperatures. We compare to recent data on depleted diamond Schottky PIN diodes demonstrating low turn-on voltages and high reverse breakdown voltages, which could be useful for high power rectifying applications due to the low turn-on voltage enabling high forward current densities. Three dimensional simulations of the depleted Schottky PIN diamond devices were performed and the results are verified with experimental data at different operating temperatures

Temperature dependent simulation of diamond depleted Schottky PIN diodes

Energy Technology Data Exchange (ETDEWEB)

Hathwar, Raghuraj; Dutta, Maitreya; Chowdhury, Srabanti; Goodnick, Stephen M. [Department of Electrical Engineering, Arizona State University, Tempe, Arizona 85287-8806 (United States); Koeck, Franz A. M.; Nemanich, Robert J. [Department of Physics, Arizona State University, Tempe, Arizona 85287-8806 (United States)

2016-06-14

Diamond is considered as an ideal material for high field and high power devices due to its high breakdown field, high lightly doped carrier mobility, and high thermal conductivity. The modeling and simulation of diamond devices are therefore important to predict the performances of diamond based devices. In this context, we use Silvaco{sup ®} Atlas, a drift-diffusion based commercial software, to model diamond based power devices. The models used in Atlas were modified to account for both variable range and nearest neighbor hopping transport in the impurity bands associated with high activation energies for boron doped and phosphorus doped diamond. The models were fit to experimentally reported resistivity data over a wide range of doping concentrations and temperatures. We compare to recent data on depleted diamond Schottky PIN diodes demonstrating low turn-on voltages and high reverse breakdown voltages, which could be useful for high power rectifying applications due to the low turn-on voltage enabling high forward current densities. Three dimensional simulations of the depleted Schottky PIN diamond devices were performed and the results are verified with experimental data at different operating temperatures.

Cyclic voltammetry response of an undoped CVD diamond electrodes

Energy Technology Data Exchange (ETDEWEB)

Fabisiak, K., E-mail: kfab@ukw.edu.pl [Institute of Physics, Kazimierz Wielki University, Powstancow Wielkopolskich 2, 85-090 Bydgoszcz (Poland); Torz-Piotrowska, R. [Faculty of Chemical Technology and Engineering, UTLS Seminaryjna 3, 85-326 Bydgoszcz (Poland); Staryga, E. [Institute of Physics, Technical University of Lodz, Wolczanska 219, 90-924 Lodz (Poland); Szybowicz, M. [Faculty of Technical Physics, Poznan University of Technology, Nieszawska 13A, 60-965 Poznan (Poland); Paprocki, K.; Popielarski, P.; Bylicki, F. [Institute of Physics, Kazimierz Wielki University, Powstancow Wielkopolskich 2, 85-090 Bydgoszcz (Poland); Wrzyszczynski, A. [Institute of Physics, Technical University of Lodz, Wolczanska 219, 90-924 Lodz (Poland)

2012-09-01

Highlights: Black-Right-Pointing-Pointer Correlation was found between diamond quality and its electrochemical performance. Black-Right-Pointing-Pointer The electrode sensitivity depends on the content of sp{sup 2} carbon phase in diamond layer. Black-Right-Pointing-Pointer The sp{sup 2} carbon phase content has little influence on the CV peak separation ({Delta}E{sub p}). - Abstract: The polycrystalline undoped diamond layers were deposited on tungsten wire substrates by using hot filament chemical vapor deposition (HFCVD) technique. As a working gas the mixture of methanol in excess of hydrogen was used. The morphologies and quality of as-deposited films were monitored by means of scanning electron microscopy (SEM), X-ray diffraction (XRD) and Raman spectroscopy respectively. The electrochemical activity of the obtained diamond layers was monitored by using cyclic voltammetry measurements. Analysis of the ferrocyanide-ferricyanide couple at undoped diamond electrode suggests that electrochemical reaction at diamond electrode has a quasireversibile character. The ratio of the anodic and cathodic peak currents was always close to unity. In this work we showed that the amorphous carbon admixture in the CVD diamond layer has a crucial influence on its electrochemical performance.

New developments in CVD diamond for detector applications

Science.gov (United States)

Adam, W.; Berdermann, E.; Bergonzo, P.; de Boer, W.; Bogani, F.; Borchi, E.; Brambilla, A.; Bruzzi, M.; Colledani, C.; Conway, J.; D'Angelo, P.; Dabrowski, W.; Delpierre, P.; Dulinski, W.; Doroshenko, J.; van Eijk, B.; Fallou, A.; Fischer, P.; Fizzotti, F.; Furetta, C.; Gan, K. K.; Ghodbane, N.; Grigoriev, E.; Hallewell, G.; Han, S.; Hartjes, F.; Hrubec, J.; Husson, D.; Kagan, H.; Kaplon, J.; Kass, R.; Keil, M.; Knoepfle, K. T.; Koeth, T.; Krammer, M.; Logiudice, A.; Lu, R.; Mac Lynne, L.; Manfredotti, C.; Meier, D.; Menichelli, D.; Meuser, S.; Mishina, M.; Moroni, L.; Noomen, J.; Oh, A.; Pernicka, M.; Perera, L.; Potenza, R.; Riester, J. L.; Roe, S.; Rudge, A.; Sala, S.; Sampietro, M.; Schnetzer, S.; Sciortino, S.; Stelzer, H.; Stone, R.; Sutera, C.; Trischuk, W.; Tromson, D.; Tuve, C.; Vincenzo, B.; Weilhammer, P.; Wermes, N.; Wetstein, M.; Zeuner, W.; Zoeller, M.

Chemical Vapor Deposition (CVD) diamond has been discussed extensively as an alternative sensor material for use very close to the interaction region of the LHC and other machines where extreme radiation conditions exist. During the last seven years the RD42 collaboration has developed diamond detectors and tested them with LHC electronics towards the end of creating a device usable by experiments. The most recent results of this work are presented. Recently, a new form of CVD diamond has been developed: single crystal CVD diamond which resolves many of the issues associated with poly-crystalline CVD material. The first tests of this material are also presented.

New developments in CVD diamond for detector applications

Energy Technology Data Exchange (ETDEWEB)

Adam, W. [HEPHY, Vienna (Austria); Berdermann, E. [GSI, Darmstadt (Germany); Bergonzo, P.; Brambilla, A. [LETI/DEIN/SPE/CEA Saclay (France); Boer, W. de [Universitaet Karlsruhe, Karlsruhe (Germany); Bogani, F. [LENS, Florence (Italy); Borchi, E.; Bruzzi, M. [University of Florence (Italy); Colledani, C.; Dulinski, W. [LEPSI, IN2P3/CNRS-ULP, Strasbourg (France); Conway, J.; Doroshenko, J. [Rutgers University, Piscataway (United States); D' Angelo, P.; Furetta, C. [INFN, Milano (Italy); Dabrowski, W. [UMM, Cracow (Poland); Delpierre, P.; Fallou, A. [CPPM, Marseille (France); Eijk, B. van [NIKHEF, Amsterdam (Netherlands); Fischer, P. [Universitaet Bonn, Bonn (Germany); Fizzotti, F. [University of Torino (Italy); Gan, K.K.; Ghodbane, N.; Grigoriev, E.; Hallewell, G.; Han, S.; Hartjes, F.; Hrubec, J.; Husson, D.; Kagan, H.; Kaplon, J.; Kass, R.; Keil, M.; Knoepfle, K.T.; Koeth, T.; Krammer, M.; Logiudice, A.; Lu, R.; Mac Lynne, L.; Manfredotti, C.; Meier, D.; Menichelli, D.; Meuser, S.; Mishina, M.; Moroni, L.; Noomen, J.; Oh, A.; Pernicka, M.; Perera, L.; Potenza, R.; Riester, J.L.; Roe, S.; Rudge, A.; Sala, S.; Sampietro, M.; Schnetzer, S.; Sciortino, S.; Stelzer, H.; Stone, R.; Sutera, C.; Trischuk, W.; Tromson, D.; Tuve, C.; Vincenzo, B.; Weilhammer, P.; Wermes, N.; Wetstein, M.; Zeuner, W.; Zoeller, M.

2004-07-01

Chemical Vapor Deposition (CVD) diamond has been discussed extensively as an alternative sensor material for use very close to the interaction region of the LHC and other machines where extreme radiation conditions exist. During the last seven years the RD42 collaboration has developed diamond detectors and tested them with LHC electronics towards the end of creating a device usable by experiments. The most recent results of this work are presented. Recently, a new form of CVD diamond has been developed: single crystal CVD diamond which resolves many of the issues associated with poly-crystalline CVD material. The first tests of this material are also presented. (orig.)

New developments in CVD diamond for detector applications

International Nuclear Information System (INIS)

Adam, W.; Berdermann, E.; Bergonzo, P.; Brambilla, A.; Boer, W. de; Bogani, F.; Borchi, E.; Bruzzi, M.; Colledani, C.; Dulinski, W.; Conway, J.; Doroshenko, J.; D'Angelo, P.; Furetta, C.; Dabrowski, W.; Delpierre, P.; Fallou, A.; Eijk, B. van; Fischer, P.; Fizzotti, F.; Gan, K.K.; Ghodbane, N.; Grigoriev, E.; Hallewell, G.; Han, S.; Hartjes, F.; Hrubec, J.; Husson, D.; Kagan, H.; Kaplon, J.; Kass, R.; Keil, M.; Knoepfle, K.T.; Koeth, T.; Krammer, M.; Logiudice, A.; Lu, R.; Mac Lynne, L.; Manfredotti, C.; Meier, D.; Menichelli, D.; Meuser, S.; Mishina, M.; Moroni, L.; Noomen, J.; Oh, A.; Pernicka, M.; Perera, L.; Potenza, R.; Riester, J.L.; Roe, S.; Rudge, A.; Sala, S.; Sampietro, M.; Schnetzer, S.; Sciortino, S.; Stelzer, H.; Stone, R.; Sutera, C.; Trischuk, W.; Tromson, D.; Tuve, C.; Vincenzo, B.; Weilhammer, P.; Wermes, N.; Wetstein, M.; Zeuner, W.; Zoeller, M.

2004-01-01

Chemical Vapor Deposition (CVD) diamond has been discussed extensively as an alternative sensor material for use very close to the interaction region of the LHC and other machines where extreme radiation conditions exist. During the last seven years the RD42 collaboration has developed diamond detectors and tested them with LHC electronics towards the end of creating a device usable by experiments. The most recent results of this work are presented. Recently, a new form of CVD diamond has been developed: single crystal CVD diamond which resolves many of the issues associated with poly-crystalline CVD material. The first tests of this material are also presented. (orig.)

Prevalence and association of post-renal transplant anemia

Directory of Open Access Journals (Sweden)

Hesham Elsayed

2012-01-01

Full Text Available In some renal allograft recipients, anemia persists or develops following transplantation. Anemia is associated with pre-operative blood loss and allograft dysfunction, including delayed graft function, acute rejection and chronic allograft dysfunction. To study the prevalence and association of post-renal transplant anemia, we studied 200 renal transplant recipients; 131 (65.5% patients were males and 69 (34.5% patients were females, and age ranged from 17 to 67 years, with a mean of 37.7 ± 10.8 years. All patients were receiving cyclosporine, prednisolone and mycophenolate mofetil (MMF. Complete blood count was done at two times: three and six months post-renal transplant. There were 74% anemic patients three months after renal transplantation and 45% anemic patients six months after renal transplantation. High creatinine value, female gender, delayed graft function, episodes of acute rejection, perioperative blood loss and infections were the only significant independent risk factors for prevalence of anemia post-renal transplant. In our study, we did not find an association between MMF and cyclosporine nor angiotensin-converting enzyme inhibitors (ACEIs or angiotensin receptors blocker (ARBs with anemia. This study demonstrates that anemia is a common complication during the first six months after kidney transplantation, with several risk factors precipitating this complication.

Diamond-based structures to collect and guide light

Energy Technology Data Exchange (ETDEWEB)

Castelletto, S [Centre for Micro-Photonics, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology, Mail H 34 Hawthorn, VIC 3122 (Australia); Harrison, J P; Marseglia, L; Stanley-Clarke, A C; Hadden, J P; Ho, Y-L D; O' Brien, J L; Rarity, J G [Centre for Quantum Photonics, H H Wills Physics Laboratory and Department of Electrical and Electronic Engineering, University of Bristol, Merchant Venturers Building, Woodland Road, Bristol BS8 1UB (United Kingdom); Gibson, B C; Fairchild, B A; Ganesan, K; Huntington, S T; Greentree, A D; Prawer, S [School of Physics, University of Melbourne, Melbourne VIC 3010 (Australia); Hiscocks, M P; Ladouceur, F, E-mail: scastelletto@swin.edu.au, E-mail: luca.marseglia@bristol.ac.uk [School of EE and T, University of New South Wales, Sydney, NSW 2052 (Australia)

2011-02-15

We examine some promising photonic structures for collecting and guiding light in bulk diamond. The aim of this work is to optimize single photon sources and single spin read-out from diamond color centers, specifically NV{sup -} centers. We review the modeling and fabrication (by focused ion beam and reactive ion etching) of solid immersion lenses, waveguides and photonic crystal cavities in monolithic diamond.

Association of mild anemia with cognitive, functional, mood and quality of life outcomes in the elderly: the "Health and Anemia" study.

Directory of Open Access Journals (Sweden)

Ugo Lucca

Full Text Available BACKGROUND: In the elderly persons, hemoglobin concentrations slightly below the lower limit of normal are common, but scant evidence is available on their relationship with significant health indicators. The objective of the present study was to cross-sectionally investigate the association of mild grade anemia with cognitive, functional, mood, and quality of life (QoL variables in community-dwelling elderly persons. METHODS: Among the 4,068 eligible individuals aged 65-84 years, all persons with mild anemia (n = 170 and a randomly selected sample of non-anemic controls (n = 547 were included in the study. Anemia was defined according to World Health Organization (WHO criteria and mild grade anemia was defined as a hemoglobin concentration between 10.0 and 11.9 g/dL in women and between 10.0 and 12.9 g/dL in men. Cognition and functional status were assessed using measures of selective attention, episodic memory, cognitive flexibility and instrumental and basic activities of daily living. Mood and QoL were evaluated by means of the Geriatric Depression Scale-10, the Short-Form health survey (SF-12, and the Functional Assessment of Cancer Therapy-Anemia. RESULTS: In univariate analyses, mild anemic elderly persons had significantly worse results on almost all cognitive, functional, mood, and QoL measures. In multivariable logistic regressions, after adjustment for a large number of demographic and clinical confounders, mild anemia remained significantly associated with measures of selective attention and disease-specific QoL (all fully adjusted p<.046. When the lower limit of normal hemoglobin concentration according to WHO criteria was raised to define anemia (+0.2 g/dL, differences between mild anemic and non anemic elderly persons tended to increase on almost every variable. CONCLUSIONS: Cross-sectionally, mild grade anemia was independently associated with worse selective attention performance and disease-specific QoL ratings.

STUDY OF ANEMIA IN ADOLESCENT SCHOOL GIRLS OF BHOPAL

Directory of Open Access Journals (Sweden)

Rakesh Kakkar

2011-06-01

Full Text Available Background: Iron-deficiency anemia is the most common form of malnutrition, early intervention during adolescence (girls can prevent high morbidity and mortality of these future mothers. Objectives: To study prevalence & factors contributing to anaemia among adolescent school girls. Material and Methods: Area or region addressed – Iron deficiency anemia in adolescent girls. Present study was conducted among 317 adolescent (10-19Yrs government schoolgirls of Bhopal city from June2005-July2006. Three study groups were selected from three different girls’ school by random sampling method. Statistical analysis was done with SPSS. Result & Conclusion: Overall prevalence was 58.4% among adolescent schoolgirls. Prevalence of anemia was dependent on the knowledge about prevention of anemia, literacy level, food habits, birth order & also frequency of Iron rich source viz. green leafy vegetable & non vegetarian diet. While there was no significant relation of anemia with duration of menstrual flow but there was significant (P<0.05 difference in number of anaemic cases with age at menarche i.e. with higher age at menarche; there was more chances of anemia. Level of anemia was higher (p<0.05 in early adolescent (10 -13 Years age group (81% as compared to middle (58.3% and late adolescent (17-19 years age group girls (48.7%.

High speed dry machining of MMCs with diamond tools

International Nuclear Information System (INIS)

Collins, J.L.

2001-01-01