Summary of diamino pyrazoles derived and study their biological activities

International Nuclear Information System (INIS)

Hagui, Marwa

2016-01-01

The work involves the synthesis of new heterocyclic structures diamino pyrazoles derivatives that are present in many natural products and products of pharmacological and therapeutic interests and study their biological activities. In order to develop a radiotracer interest and use in diagnostic nuclear medicine, we are interested to synthesis a pyrazole derivative with the precursor [Re(CO)5Br] and studying the antibacterial and antifungal activity of 3.5-diamino pyrazole and even thioamide complex rhenium. The objectives of our workout: 1/ Synthesis of molecules 3,5-diamino pyrazole and thioamide. 2/ Synthesis of 3,5-diamino pyrazole-rhenium complex. 3/ The in vitro study: Bacteriological Tests (Study of antibacterial and antifungal activity of 3,5-diamino pyrazole and thioamide). The first part of this work concerns the chemical synthesis of molecules such as: thioamide, Amp z1 Ampz2 and then we had synthesized the complex 3,5-diamino pyrazole-rhenium. Similarly we determined the physicochemical characteristics of the compounds synthesized by CLHP, CCM and RMN ( 1 H, 13 C). The second part is devoted to the study in vitro of biological activities of the synthesized molecules and complex 3,5 diaminopyrazole-rhenium with concentration 1 mg/mL and 2 mg/mL. The results allow us to say that the thioamide and Ampz2 have antibacterial activity against S. enterica and Ampz2 has low activity against S. aureus and P. aeruginossa. Other pyrazole derivatives have no significant antibacterial and antifungal activity. The results also show that the synthesized compounds of concentration 2 mg/mL in relation to the inhibition zones of amoxicillin and DMSO: 1/ Escherichia coli, there is antibacterial activity for thioamide, and the Amp z1-Re Ampz2 compound. 2/ Staphylococcus aureus, the complex Ampz 1-Re and the thioamide have significant antibacterial activity. 3/ Salmonella, we observe that the thioamide molecules, Ampz2 and Amp z1-Re have significant antibacterial activity

Polybutadiene latex particle size distribution analysis utilizing a disk centrifuge

NARCIS (Netherlands)

Verdurmen, E.M.F.J.; Albers, J.G.; German, A.L.

1994-01-01

Polybutadiene (I) latexes prepd. by emulsifier-free emulsion polymn. and having particle diam. 50-300 nm for both unimodal and bimodal particles size distributions were analyzed by the line-start (LIST) method in a Brookhaven disk centrifuge photosedimentometer. A special spin fluid was designed to

Gelation of Photonic Microdomain Structures Formed in Semi-Dilute Solutions of Ultra-High-Molecular-Weight Polystyrene-b-Polybutadiene with Various Polybutadiene Contents

International Nuclear Information System (INIS)

Okamoto, S; Ito, S; Ando, K; Mouri, M; Ikeda, A; Hasegawa, H; Koshikawa, N

2010-01-01

Well-ordered microdomain structures were obtained in semi-dilute solutions and successfully stabilized by gelation. We used polystyrene-b-polybutadiene (PS-b-PB) diblock copolymer with the weight-averaged molecular weight varying from several hundred thousands to millions g/mol. The solutions had iridescent colors because the domain spacing is on the order of the wavelength of visible light. As the structures are susceptible to distortion by flow or vibration, structural fixation was carried out by gelation. The polybutadiene used has the microstructure of 1,2-linkage and hence the chains can be cross-linkable. The Small-Angle X-ray Scattering and the UV-vis spectroscopic measurements showed that in the case of PS-b-PBs with the PB volume fraction, φ PB , greater than about 50 vol % the microdomain structures were successfully fixed by gelation, while largely distorted in the case of those with φ PB < ca. 50 vol %. The SAXS scattering intensities were quantitatively analyzed by the scattering functions numerically calculated based on the one- and two-dimensional paracrystal theories and on the concentration fluctuation between the polymers and the solvent molecules.

Oxadiazole telechelics immobilized on silica for proton conductive membranes

Energy Technology Data Exchange (ETDEWEB)

Treekamol, Yaowapa; Schieda, Mauricio [GKSS-Forschungszentrum Geesthacht GmbH (Germany); Nunes, Suzana [King Abdullah Univ. of Science and Technology, Thuwal (Saudi Arabia); Schulte, Karl [Technische Univ. Hamburg-Harburg, Hamburg (Germany)

2010-07-01

Functionalized silica and layered silicates have been used in our group to prepare proton conductive membranes with applications to direct methanol fuel cells. We report recent results on the use of silica with amphoteric functionalization in proton conductive membranes working at low humidity levels. Aerosil silica was functionalized by reacting it subsequently with bromophenyltrimethoxysilane and with aromatic bishydroxy terminated oxadiazole oligomers. We have prepared proton conductive membranes including as fillers a series of different sulfonated and non-sulfonated telechelics, synthesized with diphenylsulfone, diphenylether and fluorinated oxadiazole segments. We will present a comparison between fillers with different functionalization and how they affect the conductivity of a proton conductive polymer matrix. The functionalized fillers present the possibility of improving water retention and increasing the maximum doping level with phosphoric acid. Furthermore, the oligomer segments, containing both basic nitrogen and acid sulfonic groups, give an amphoteric character to the membrane, improving the proton conductivity in low humidity conditions. (orig.)

Vulcanization of polybutadiene latex induced by 60Co γ-rays irradiation

International Nuclear Information System (INIS)

Liu Yuguang; Huang Yudong; Hou Jing; Gao Deyu; Zhang Xuequan

2007-01-01

Fully vulcanized polybutadiene rubber particles (FVBR) were prepared by polybutadiene latex (PBL) vulcanization induced by 60 Co γ-rays irradiation, and the effect of absorbed dose on crosslinking behavior was studied. Mean diameter, diameter distribution and morphology of the particles in the PBL irradiated at different doses as well as in the FVBR were characterized by laser particle analyzer and AFM. The crosslinking effect on the mechanical properties of the films, by casting from PBL at different doses correspondingly, was evaluated by mechanical and dynamic mechanical analysis (DMA) respectively. The results showed that the diameter and swelling property decreased with absorbed dose, while crosslink density and gel fraction increased. Moreover, the decrease of the tensile strength and elongation at break, the increase of the hardness in shore A and young's modulus (E), and the increase of storage modulus (E') and narrowing of loss tangent peak (Tan 8) were all accounted for the increment of crosslinking. The Charlesby-Pinner equation fits well with the PBL vulcanization in the range of absorbed doses from 0 to 200kGy. (authors)

Epoxidation of polybutadiene rubber in non polar solvent

International Nuclear Information System (INIS)

Schneider, Luciane K. de A.; Jacobi, Marly A.M.

2005-01-01

The epoxidation of polybutadiene rubber in cyclohexane, at 50 deg C, by the method of performic acid generated in situ, at different reagent concentration was investigated. The epoxy degree was determined by 1 H-RMN, and because of the gelation and coagulation of modified rubber during the reaction, only a maximum of 30 mol % of epoxy degree could be achieved. The reaction followed a first order kinetic in relation to hydrogen peroxide and acid concentration showing a rate constant of 4,0 (± 0,5) x 10 -5 L.mol-1.seg -1 . (author)

Near ultraviolet spectroscopic studies of 2,4-diamino-6-piperidinopyrimidine-3-oxide (minoxidil) and 2,4-diamino-6-piperidinopyrimidine (desoxyminoxidil)

Science.gov (United States)

Thamann, Thomas J.

The near u.v. spectra of 2,4-diamino-6-piperidinopyrimidine (desoxyminoxidil) and 2,4-diamino-6-piperidinopyrimidine-3-oxide (minoxidil) can be viewed as perturbed pyrimidine spectra. The u.v. properties of pyrimidine and a series of aminopyrimidines, specifically 2,4,6-triaminopyrimidine, are examined to obtain u.v. spectral assignments for desoxyminoxidil and minoxidil. Minoxidil and its desoxy counterpart have C s symmetry, and all π → π* absorptions are allowed 1A' ← 1A' transitions. The two lowest energy π →- π* absorptions observed in minoxidil (262 nm, 292 nm) are tentatively assigned as very mild oxygen → pyrimidine ring charge-transfer transitions. Intensity decreases in protic solvents, and the results of simple Hückel molecular orbital calculations indicate that the 292 nm transition has more charge-transfer character than the 262 nm absorption. The protonated species of desoxyminoxidil and minoxidil have very similar u.v. spectra. This is due to the lack of oxygen-related charge transfer in protonated minoxidil, and the high probability that the positive charge resides in similar environments in the minoxidil and desoxyminoxidil molecular frameworks.

DIPYRIDOXYL(1,8-DIAMINO-3,6-DIOXAOCTANE) SCHIFF-BASE

African Journals Online (AJOL)

Preferred Customer

KEY WORDS: Schiff base, N,N′-dipyridoxyl(1,8-diamino-3,6-dioxaoctane), DFT, B3LYP. INTRODUCTION. Schiff bases due to structural varieties and unique characteristics are the most versatile studied ligands in coordination chemistry [1, 2] and their metal complexes play an important role in the development of inorganic ...

Synthesis of hydroxyl liquid polybutadiene by photochemical decomposition of hydrogen peroxide

International Nuclear Information System (INIS)

Moutinho, Marcus Tadeu Moura

1995-01-01

The synthesis of hydroxyl terminated polybutadienes (HTPB) by photochemical decomposition (λ=254 nm) of hydrogen peroxide (H 2 O 2 ) in alcoholic medium was studied. The influence of reaction time, H 2 O 2 and alcohol concentrations, type of alcohol and radiation intensity on the polymerization rate was determined. Higher polymerization rates were attained when t-butyl alcohol was used as the compatibilizing agent (19% conversion after 8 hours). The HTPBs were characterized by hydroxyl content (acetylation), functionality, IR microstructure and types of hydroxyl groups ( 1 H-NMR and 13 C-NMR), 2-vinyl cyclohexene (VCH) content and viscosity. The polymers showed molecular weights (Mn) in the range of 458 to 1,099, molecular weight distribution (Mw/Mn) in the range of 1.20 to 1.46 and functionality between 1.2 and 3.2 depending on the alcohol used. NMR results 1 H and 13 C) revealed low cis content for the polybutadienes and identified primary and secondary hydroxyl groups, depending on the alcohol employed as compatibilizing agent. The incorporation of alcohol in polymer chain ends was evidenced. The produced HTPBs presented viscosities in the range of 850 to 1,250 cP (at 25 deg C) and were VCH free. (author)

Neutron scattering on partially deuterated polybutadiene

CERN Document Server

Kahle, S; Monkenbusch, M; Richter, D; Arbe, A; Colmenero, J; Frick, B

2002-01-01

The molecular nature of the secondary relaxation (Johari-Goldstein relaxation) and its relationship with the alpha relaxation is in most cases still unknown. In order to access these processes on a molecular level, it is necessary to obtain spatial information of the relaxation. Through the momentum-transfer dependence of the dynamic structure factor S(Q,t), this information can be provided by quasielastic neutron scattering techniques. The large difference in scattering lengths between hydrogen and deuterium allows us to accentuate specific correlations between atoms in a polymer melt. Here, we report on recent results on a polybutadiene melt, where the double bond was hydrogeneous, while the methylene groups carried deuterons (d4h2-PB). In this way the correlations between the double bonds are emphasised. We will show that the double bond/double bond correlation function, generated in this way, shows the same temperature dependence as the viscosity at higher temperatures at the structure factor peak maximum...

N,N′-Dipyridoxyl(1,8-diamino-3,6-dioxaoctane) Schiff-base

African Journals Online (AJOL)

The N,N′-dipyridoxyl(1,8-diamino-3,6-dioxaoctane) (=H2L) Schiff-base has been synthesized and characterized by IR, 1H NMR, mass spectrometry and elemental analysis. Its optimized geometry and theoretical vibrational frequencies have been computed using density functional theory (DFT) method via the B3LYP ...

Hydrophilic nanoporous polystyrenes and 1,2-polybutadienes

DEFF Research Database (Denmark)

Guo, Fengxiao; Jankova Atanasova, Katja; Vigild, Martin Etchells

2008-01-01

Nanoporous polymers from ordered block copolymers having hydrophilic cavity surfaces were successfully prepared by two methodologies: ' 1. Nanoporous polystyrenes fromPtBA-b-PS diblock or PDMS-b-PtBA-b-PS triblock copolymer precursors by atom transfer radical polymerization (ATRP), or combination...... of living anionic polymerization~ and ATRP r~spectively. The one, PtBA block, can be modified to the hydrophilic PAA, where the dther, polydimethysiloxane (PDMS) block, can be fully degraded. Deprotection of the tert-butyl groups in PtBA and the selective etching of PDMS· chains were accomplished...... by applying HF or TFA in one step. Thus both the di- and triblock copolymers after such a treatment resulted. in nanoporous polystyrenes with hexagonal cavities of different nanosizes (6-11 nm, Figure 1). 2. Nanoporous I,2-polybutadienes (I,2-PB) by grafting various acrylic monomers onto the pore. surfaces...

The microstructure of irradiated hydroxy-terminated polybutadiene

International Nuclear Information System (INIS)

Wu Yiming; Zhou Dezhen; Zhang Zhiping; Jing Yudong; Ying Shengkang

1989-01-01

Hydroxy-terminated polybutadiene (HTPB) is one kind of plybutadiene chief chain structure polymer terminated with hydroxyl groups. Because there are double-bonds in the chief chain, the α-hydrogen atom is very active, and crosslink reaction is easy to take place under γ-ray irradiation. The property of HTPB is affected by γ-ray directly. So it is significant practically and theoreticaly to study the change in structure and property under radiation. The microstructure of HTPB solute molecules and the change of molecular weight with radiation dose were studied by infrared spectra, NMR and GPC in the work. The effects of radiation on HTPB were discussed from the viewpoint of the change of solute molecular structure and gel kinetics. The measured gel dose of HPTB is 0.605 MGY, G = 1.802, thus the authors came to the conclusion that reaction is the chief process in the irradiation of HPTB

Derivatives of 1,3-oxazolidines on the base of diamino-alcohols

International Nuclear Information System (INIS)

Karimov, M.B.; Kimsanov, B.Kh.; Tagaeva, S.E.; Khuseynov, K.B.

2001-01-01

In this article authors investigated the reaction of 1-cyclohexyl amino-3-diethyl amino-2-propanol, 1-butylamine-3-diethyl amino-2-propanol. By authors was determined that reaction of initial diamino-alcohols with furfural passing at molar correlation of reagents 1:1 at temperature 20-22 d ig C at presence dehydrating medium-potash during 36 hours

Synthesis of High cis-Polybutadiene in Styrene Solution with Neodymium-Based Catalysts: Towards the Preparation of HIPS and ABS via In Situ Bulk Polymerization

Directory of Open Access Journals (Sweden)

Ramón Díaz de León

2016-01-01

Full Text Available In a first step, 1,3-butadiene was selectively polymerized at 60°C in styrene as solvent using NdV3/DIBAH/EASC as the catalyst system. The catalyst system activation process, the addition order of monomers and catalyst components, and the molar ratios [Al]/[Nd] and [Cl]/[Nd] were studied. The catalyst system allowed the selective 1,3-butadiene polymerization, reaching conversions between 57.5 and 88.1% with low polystyrene contents in the order of 6.3 to 15.4%. Molecular weights ranging from 39,000 to 150,000 g/mol were obtained, while cis-1,4 content was found in the interval of 94.4 to 96.4%. On the other hand, the glass transition temperatures of synthesized materials were established in the range of −101.9 to −107.4°C, explained by the presence of polystyrene segments in the polybutadiene chains; in the same sense, the polybutadienes did not show the typical melting endotherm of high cis-polybutadienes. In a second step, the resulting styrene/high cis-1,4 polybutadiene solutions were used to synthesize ABS (adding a fraction of acrylonitrile monomer and HIPS via in situ bulk polymerizations and the results were discussed in terms of morphological development, molecular parameters, dynamical mechanical behavior, and mechanical properties.

Synthesis of nanodispersible 6-aryl-2,4-diamino-1,3,5-triazine and its derivatives

International Nuclear Information System (INIS)

Padalkar, Vikas S.; Patil, Vikas S.; Phatangare, Kiran R.; Gupta, Vinod D.; Umape, Prashant G.; Sekar, N.

2010-01-01

A series of novel branched derivatives of 6-aryl-2,4-diamino-1,3,5-triazine from corresponding aryl nitriles and dicyanodiamide was synthesized. These compounds show a nanodispersibility and good thermal stability.

Evaluation of polybutadiene rubbers using FTIR spectra

Energy Technology Data Exchange (ETDEWEB)

Oliveira, L.N.; Schimidt, F., E-mail: lucas@ifg.edu.br [Instituto Federal de Educacao, Ciencia e Tecnologia de Goias (IFG), Goiania, GO (Brazil); Antonio, P.L.; Caldas, L.V.E. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Vieira, S.L. [Universidade Federal de Goias (UFG), Goiania, GO (Brazil). Instituto de Fisica

2017-09-01

Radiation dosimetry for medical and industrial purposes has increasingly evolved over the last few decades with the introduction of various new detectors. Depending on the properties exhibited for radiation dosimetry, some detectors present their applications in a specific area. From a physics point of view, an ideal dosimeter should be able to measure absorbed dose. In this work, synthetic materials based on polybutadiene rubbers (PBR) were proposed as a new class of radiation detectors. The influence of radiation dose on their properties has been investigated for application in radiation dosimetry. The rubber samples were exposed to absorbed doses from 10 Gy up to 250 Gy, using a {sup 60}Co Gamma Cell-220 system. Their responses were carried out with a Fourier Transform Infrared (FTIR) Spectrometer to investigate the presence of absorbance peaks. The results suggested the existence of a relationship between the absorbed doses and the absorbance peaks associated with stretching (1300-1200 cm{sup -1}), deformation (1450-1340 cm{sup -1}) and vibration (1500-1400 cm{sup -1}) processes in the material. (author)

Evaluation of polybutadiene rubbers using FTIR spectra

International Nuclear Information System (INIS)

Oliveira, L.N.; Schimidt, F.; Antonio, P.L.; Caldas, L.V.E.; Vieira, S.L.

2017-01-01

Radiation dosimetry for medical and industrial purposes has increasingly evolved over the last few decades with the introduction of various new detectors. Depending on the properties exhibited for radiation dosimetry, some detectors present their applications in a specific area. From a physics point of view, an ideal dosimeter should be able to measure absorbed dose. In this work, synthetic materials based on polybutadiene rubbers (PBR) were proposed as a new class of radiation detectors. The influence of radiation dose on their properties has been investigated for application in radiation dosimetry. The rubber samples were exposed to absorbed doses from 10 Gy up to 250 Gy, using a "6"0Co Gamma Cell-220 system. Their responses were carried out with a Fourier Transform Infrared (FTIR) Spectrometer to investigate the presence of absorbance peaks. The results suggested the existence of a relationship between the absorbed doses and the absorbance peaks associated with stretching (1300-1200 cm"-"1), deformation (1450-1340 cm"-"1) and vibration (1500-1400 cm"-"1) processes in the material. (author)

New ' Bucky- ligands'. Potentially Monoanionic Terdentate Diamino Aryl Pincer Ligands Anchored to C60

NARCIS (Netherlands)

Koten, G. van; Meijer, M.D.; Gossage, R.A.; Jastrzebski, J.T.B.H.

1998-01-01

Two new methanofullerenes have been prepared by the reaction of C{6}{0} with diazo substituted, potentially monoanionic, terdentate diamino aryl ligands, yielding a mixture of the open valence [5, 6]- and closed valence [6,6]-isomers. Single isomers of the pure [6,6]-methanofullerenes were obtained

Lattice cluster theory of associating polymers. I. Solutions of linear telechelic polymer chains.

Science.gov (United States)

Dudowicz, Jacek; Freed, Karl F

2012-02-14

The lattice cluster theory (LCT) for the thermodynamics of a wide array of polymer systems has been developed by using an analogy to Mayer's virial expansions for non-ideal gases. However, the high-temperature expansion inherent to the LCT has heretofore precluded its application to systems exhibiting strong, specific "sticky" interactions. The present paper describes a reformulation of the LCT necessary to treat systems with both weak and strong, "sticky" interactions. This initial study concerns solutions of linear telechelic chains (with stickers at the chain ends) as the self-assembling system. The main idea behind this extension of the LCT lies in the extraction of terms associated with the strong interactions from the cluster expansion. The generalized LCT for sticky systems reduces to the quasi-chemical theory of hydrogen bonding of Panyioutou and Sanchez when correlation corrections are neglected in the LCT. A diagrammatic representation is employed to facilitate the evaluation of the corrections to the zeroth-order approximation from short range correlations. © 2012 American Institute of Physics

Fire resistant polyamide based on 1-(diorganooxyphosphonyl)methyl-2,4- and -2,6diamino benzene

Science.gov (United States)

Mikroyannidis, J. A. (Inventor); Kourtides, D. A. (Inventor)

1986-01-01

1-(Diorganooxyphosphonyl)methyl2,4- and-2,6diamino benzenes are reacted with polyacylhalides and optionally comonomers to produce polyamides which have desirable heat and fire resistance properties. These polymers are used to form fibers and fabrics where fire resistance properties are important, e.g., aircraft equipment and structures.

Synthesis and phase behavior of end-functionalized associating polymers

Science.gov (United States)

Wrue, Michelle H.

We have explored polymer blend phase behavior in the presence of multiple hydrogen bonding end-groups. This work details the synthesis of functionalized polymers and their subsequent use in miscibility studies. The synthesis of end-functionalized hydrogen bonding polymers and the investigation of their physical properties and miscibility is presented. Mono-functional and telechelic ureidopyrimidinone (UPy) functionalized polymers were prepared by two main routes: post-polymerization functionalization (of commercially available or synthesized polymers); and polymerization of monomers using a functionalized initiator. UPy-functionalized polymers were prepared with a variety of polymer backbones including poly(ethylene oxide)s; poly(butadiene)s, poly(dimethyl siloxanxe)s; poly(styrene)s and poly(methyl methacrylate)s. The most successful route to polymers with UPy end-groups was atom transfer radical polymerization (ATRP) using a UPy-functionalized initiator, followed by atom transfer radical coupling (ATRC). The incorporation of ureidopyrimidinone end-groups was shown to affect the physical properties of the polymer backbone. Parent polymers that were liquids became viscous liquids or waxy solids upon UPy-functionalization of chain end. UPy-functionalization of a hydroxyl-terminated polybutadiene (HO-PB-OH) resulted in a waxy solid while the HO-PB-OH precursor was a viscous liquid. The thermal properties of functionalized polymers also differed from those of the unfunctionalized parent polymers. Hot-stage optical microscopy revealed that UPy-functionalized PEO displayed a depressed melting point relative to the analogous unfunctionalized precursor. Differential scanning calorimetry was also used to investigate the synthesized UPy-polymers. UPy-functionalized polystyrenes and poly(methyl methacrylate)s showed an increased T g compared to the equivalent homopolymer standards. This increased Tg was determined to be dependent upon the fraction of UPy groups present and

Chitin based polyurethanes using hydroxyl terminated polybutadiene, part III: surface characteristics.

Science.gov (United States)

Zia, Khalid Mahmood; Zuber, Mohammad; Saif, Muhammad Jawwad; Jawaid, Mohammad; Mahmood, Kashif; Shahid, Muhammad; Anjum, Muhammad Naveed; Ahmad, Mirza Nadeem

2013-11-01

Hydroxy terminated polybutadiene (HTPB)-chitin based polyurethanes (PUs) with controlled hydrophobicity were synthesized using HTPB and toluene diisocyanate (TDI). The prepolymer was extended with different mass ratios of chitin and 1,4-butane diol (BDO). The effect of chitin contents in chain extender (CE) proportions on surface properties was studied and investigated. Incorporation of chitin contents into the final PU showed decrease in contact angle value of water drop, water absorption (%) and swelling behavior. The antibacterial activity of the prepared samples was affected by varying the chitin contents in the chemical composition of the final PU. The results demonstrated that the use of prepared material can be suggested as non-absorbable suture. Copyright © 2013 Elsevier B.V. All rights reserved.

Improvement of reinforced concrete properties based on modified starch/polybutadiene nanocomposites.

Science.gov (United States)

Saboktakin, Amin; Saboktakin, Mohammad Reza

2014-09-01

A novel polymer-modified cement concrete with carboxymethyl starch (CMS) and 1,4-cis polybutadiene (PBD) system by mixing polymer dispersions or redispersible polymer powders with the fresh mixture have been examined. In this paper, the addition of CMS-PBD powders in an aqueous solution is studied. Polymeric molecules are supplied on a molecular scale, improving the approach of the relatively large cement grains by the polymers. The chemical and mechanical properties of CMS-PBD-modified cement concrete have been studied. The additions of very small amounts of CMS-PBD polymeric system results in an improvement of the durability and the adhesion strength of the cementitious materials, which makes them appropriate as repair materials. Copyright © 2014 Elsevier B.V. All rights reserved.

Preparation and characterization of PVDF separators for lithium ion cells using hydroxyl-terminated polybutadiene grafted methoxyl polyethylene glycol (HTPB-g-MPEG) as additive

Science.gov (United States)

Li, Hao; Niu, Dong-Hui; Zhou, Hui; Chao, Chun-Ying; Wu, Li-Jun; Han, Pei-Lin

2018-05-01

Hydroxyl-terminated polybutadiene grafted methoxyl polyethylene glycol (HTPB-g-MPEG) with different arm length were synthesized by grafting methoxyl poly(ethylene glycol)s (MPEGs, Mn = 350, 750, 1900 and 5000, respectively) to the hydroxyl-terminated polybutadiene (HTPB) molecule using isophorone diisocyanate (IPDI) as the coupling agent, and blended with PVDF to fabricate porous separators via phase inversion process. By measuring the composition, morphology and ion conductivity etc., the influence of HTPB-g-MPEG on structure and property of blend separators were discussed. Compared with pure PVDF separator with comparable porous structure, the adoption of HTPB-g-MPEG could not only decrease the crystallinity, but also enhance the stability of entrapped liquid electrolyte and corresponding ion conductivity. The cells assembled with such separators showed good initial discharge capacity and cyclic stability.

2,3-Diamino-pyridinium 6-carb-oxy-pyridine-2-carboxyl-ate.

Science.gov (United States)

Foroughian, Mahsa; Foroumadi, Alireza; Notash, Behrouz; Bruno, Giuseppe; Amiri Rudbari, Hadi; Aghabozorg, Hossein

2011-12-01

The asymmetric unit of the title proton-transfer compound, C(5)H(8)N(3) (+)·C(7)H(4)NO(4) (-), consists of one mono-deprotonated pyridine-2,6-dicarb-oxy-lic acid as anion and one protonated 2,3-diamino-pyridine as cation. The crystal packing shows extensive O-H⋯O, N-H⋯O and N-H⋯N hydrogen bonds. Thre are also several π-π inter-actions between the anions and also between the cations [centriod-centroid distances = 3.6634 (7), 3.7269 (7), 3.6705 (7) and 3.4164 (7) Å].

Mechanical and swelling behaviour of well characterized polybutadiene networks

Science.gov (United States)

Mckenna, Gregory B.; Hinkley, Jeffrey A.

1986-01-01

Endlinking of hydroxyl-terminated polybutadiene with the appropriate isocyanate has been used to prepare well characterized networks. Two networks have been studied with molecular weights of the prepolymers being 6100 and 2400 g/mole by g.p.c. Cylindrical specimens were prepared and the derivatives of the stored energy function with respect to the stretch invariants were determined by torque and normal force measurements in torsion. From these data the Valanis-Landel (1967) stored energy function derivatives w-prime(lambda) were determined for both networks. The stored energy function for the junction constraint model of Flory (1953, 1977, 1979, 1985) which is a special form of the Valanis-Landel function, has been fitted to that determined from the experiments. The contributions to the stored energy function from the phantom network and from the junction constraints respectively do not agree with predictions from the topologies of the networks. In spite of this, the form of w-prime(lambda) for the junction constraint model gives an excellent 'curve fit' to the data. Comparison is also made with equilibrium swelling.

Enhanced Removal of Trichloroethylene in Water Using Nano-ZnO/Polybutadiene Rubber Composites

Directory of Open Access Journals (Sweden)

Dae Gyu Jang

2016-09-01

Full Text Available An innovative nanoscale ZnO/polybutadiene rubber composite (ZBRC was developed as a valid alternative to TiO2 particles or immobilized TiO2 for the mineralization of chlorinated hydrocarbons without difficulties in the recovery of nanoscale photocatalyst particles. A synergistic increase in the removal of 1,1,2-trichloroethylene (TCE through the coupled reaction processes (i.e., sorption, photolysis, and photocatalysis was observed because sorption of TCE to the ultraviolet(UV-transparent polybutadiene rubber occurred, and was coupled with the heterogeneous photocatalytic reactions with nanoscale ZnO particles on the surface of ZBRC. The removal rate of TCE decreased with an increase in the initial concentration of TCE because of both inhibited generation of electron–hole pairs and deficiency of photons to activate ZnO particles. Also, the TCE removal rate increased as the loading amount of ZBRC increased. Based on satisfactory linear regressions (R2 ≥ 0.94 between the apparent degradation rate constant (Kapp and the initial concentration vs. the ZBRC loading amount, the Kapp values can be estimated, a priori, without performing photocatalytic experiments. The removal efficiencies were more significantly affected by the changes in the initial concentration of TCE and the ZBRC loading amounts than by the changes in light intensity and pH in aqueous solutions. From the results of response surface analysis, the greater removal efficiencies of TCE were achieved with higher pH values, greater amounts of ZBRC, and greater intensity of light. Based on these results, newly-developed ZBRC with both high removal efficiency and low cost performs as a valid alternative to TiO2 particles or immobilized TiO2 for the mineralization of chlorinated hydrocarbons in various environmental and industrial matrices.

Two-Dimensional Liquid Chromatography Analysis of Polystyrene/Polybutadiene Block Copolymers.

Science.gov (United States)

Lee, Sanghoon; Choi, Heejae; Chang, Taihyun; Staal, Bastiaan

2018-05-15

A detailed characterization of a commercial polystyrene/polybutadiene block copolymer material (Styrolux) was carried out using two-dimensional liquid chromatography (2D-LC). The Styrolux is prepared by statistical linking reaction of two different polystyrene- block-polybutadienyl anion precursors with a multivalent linking agent. Therefore, it is a mixture of a number of branched block copolymers different in molecular weight, composition, and chain architecture. While individual LC analysis, including size exclusion chromatography, interaction chromatography, or liquid chromatography at critical condition, is not good enough to resolve all the polymer species, 2D-LC separations coupling two chromatography methods were able to resolve all polymer species present in the sample; at least 13 block copolymer species and a homopolystyrene blended. Four different 2D-LC analyses combining a different pair of two LC methods provide their characteristic separation results. The separation characteristics of the 2D-LC separations are compared to elucidate the elution characteristics of the block copolymer species.

Synthesis and characterization of modified starch/polybutadiene as novel transdermal drug delivery system.

Science.gov (United States)

Saboktakin, Mohammad Reza; Akhyari, Shahab; Nasirov, Fizuli A

2014-08-01

Transdermal drug delivery systems are topically administered medicaments in the form of patches that deliver drugs for systemic effects at a predetermined and controlled rate. It works very simply in which drug is applied inside the patch and it is worn on skin for long period of time. Polymer matrix, drug, permeation enhancers are the main components of transdermal drug delivery systems. The objective of the present study was to develop the modified starch and 1,4-cis polybutadiene nanoparticles as novel polymer matrix system. We have been studied the properties of a novel transdermal drug delivery system with clonidine as drug model. Copyright © 2014 Elsevier B.V. All rights reserved.

Determination of Polybutadiene Unsaturation Content in Thermal and Thermo-Oxidative Degradation Processes by NMR

Directory of Open Access Journals (Sweden)

Farshid Ziaee

2013-01-01

Full Text Available The unsaturation content of various polybutadiene (PBD types of 1,4-cis, 1,4-trans and 1,2-vinyl isomers with different molecular weights was investigated. An important parameter for unsaturation content of polybutadiene would be the determination of olefnic and aliphatic contents for three types of isomers. For this purpose, proton and carbon nuclear magnetic resonance spectroscopy methods were employed for determination of 1,4-cis, 1,4-trans and 1,2-vinyl contents. A change of adjustable parameter of NMR software was made for accurate integrals giving better results. The accuracy in calculation of low molecular weight PBD, surface area of chain end group decreased in aliphatic region. Furthermore, the changing of unsaturation content versus time was considered for 1,2-PBD and 1,4-PBD in thermal degradation conditions at 250°C. NMR results showed that during heating, the unsaturation content decreased for 1,2-PBD and was not changed for 1,4-PBD. In fact, the basic factor responsible for changing of unsaturation content in thermal degradation of PBD may be due to the presence of 1,2-vinyl isomer. Finally, changing in unsaturation content versus time was observed for 1,2-PBD and 1,4-PBD in thermo-oxidative degradation conditions at 100°C. The NMR results showed that at extended time, the unsaturation content decreased for 1,4-PBD and was not changed for 1,2-PBD. Moreover, the basic factor for changes in unsaturation content in thermo-oxidative degradation of PBD is due to the presence of 1,4-cis and 1,4-trans isomers.

A study on the thermal decomposition behavior of derivatives of 1,5-diamino-1H-tetrazole (DAT): A new family of energetic heterocyclic-based salts

International Nuclear Information System (INIS)

Fischer, Gerd; Holl, Gerhard; Klapoetke, Thomas M.; Weigand, Jan J.

2005-01-01

The thermal decomposition of the highly energetic 1,5-diamino-4-methyl-1H-tetrazolium nitrate (2b), 1,5-diamino-4-methyl-1H-tetrazolium dinitramide (2c) and 1,5-diamino-4-methyl-1H-tetrazolium azide (2d) were investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Mass spectrometry and IR spectroscopy were used to identify the gaseous products. Decomposition appears in the cases of 2c and 2d to be initiated by a proton transfer to form the corresponding acid HN 3 and HN 3 O 4 whereas in the case of 2b a methyl group transfer to MeONO 2 is observed as initial process. The gaseous products after the exothermic decomposition are comparable and are in agreement of the possible decomposition pathways discussed for the corresponding compounds. For all processes, possible decomposition schemes are presented. The decomposition temperatures of 2b and 2c are significantly higher than that of 2d and were supported by evaluation the values of the activation energy according the method of Ozawa and Kissinger

Impact behavior of f-silica and amine terminated polybutadiene co-acrylonitrile rubber modified novolac epoxy/Kevlar nanocomposites

Science.gov (United States)

Kavita, Pal, Vijayeta; Tiwari, R. K.

2018-05-01

In the present work, nano-fumed silica treated with 3-Glycidoxypropyl trimethoxy silane (f-silica) was used as a nanoreinforcement in the fabrication of amine terminated polybutadiene co-acrylonitrile rubber (ATBN) modified Kevlar/epoxy based nanocomposites. Nanocomposites with different f-silica loading (0, 0.5, 1.0 and 2.0 wt. %) and having same ATBN (10 wt. %) were made and characterized by Izod impact test for evaluating impact strength values. All the nanocomposites showed better impact strength than neat Kevlar/novolac epoxy based composite.

Radiation-induced loss of unsaturation in 1,2-polybutadiene

International Nuclear Information System (INIS)

Golub, M.A.; Cormia, R.D.

1982-01-01

The radiation induced loss of unsaturation and methyl production in 1,2-polybutadiene (VB) was studied using IR spectroscopy. It was found that G(-1,2), which depends on the initial vinyl content, decreased from approximately 550 for VB with 98.5% 1,2 initially, to approximately 270 for VB with 85% 1,2 initially. G(-trans-1,4) ranged from approximately 21 for VB with 14% trans-1,4 to nearly zero for VB with less than 1% trans-1,4 initially. Methyl production was found to equal one methyl group formed for every 4-5 vinyl units consumed in the radiation-cyclized VB, in contrast to one methyl formed for every two vinyls reacted during cationic cyclization to give monocyclic structures. The IR spectra of gamma-irradiated VB were very similar to the spectra of UV-irradiated or thermally-treated VB at the same residual vinyl contents. It is suggested that the radiation-induced cyclization of VB occurs by a nonionic, nonradical 'energy chain' mechanism, which apparently holds for the cyclization of VB, whether induced by gamma-rays, UV radiation, or heat

Phase behavior of binary polybutadiene copolymer mixtures as an example of weakly interacting polymers

CERN Document Server

Schwahn, D

2002-01-01

Binary blends of statistical polybutadiene copolymers of different vinyl content and molar volume were explored by small-angle neutron scattering. These samples represent the most simple class of statistical copolymer mixtures. In spite of this simplicity, changes in vinyl content, molar volume, and deuterium and hydrogen content of the chains give rise to strong effects; phase separation occurs from minus 230 C to more than plus 200 C and can even reverse from an enthalpically driven one at low temperatures to an entropically driven one at high temperatures. The entropic and enthalpic terms of the Flory-Huggins parameter as determined from the experiment are in excellent agreement with lattice cluster theory calculations. (orig.)

Synthesis and DNA binding properties of 1-(3-aminopropyl)-imidazole-containing triamide f-Im*PyIm: a novel diamino polyamide designed to target 5'-ACGCGT-3'.

Science.gov (United States)

Satam, Vijay; Babu, Balaji; Porte, Alexander; Savagian, Mia; Lee, Megan; Smeltzer, Thomas; Liu, Yang; Ramos, Joseph; Wilson, W David; Lin, Shicai; Kiakos, Kostantinos; Hartley, John A; Lee, Moses

2012-09-15

A novel diamino/dicationic polyamide f-Im(*)PyIm (5) that contains an orthogonally positioned aminopropyl chain on an imidazole (Im(*)) moiety was designed to target 5'-ACGCGT-3'. The DNA binding properties of the diamino polyamide 5, determined by CD, ΔT(M), DNase I footprinting, SPR, and ITC studies, were compared with those of its monoamino/monocationic counterpart f-ImPyIm (1) and its diamino/dicationic isomer f-ImPy(*)Im (2), which has the aminopropyl group attached to the central pyrrole unit (Py(*)). The results gave evidence for the minor groove binding and selectivity of polyamide 5 for the cognate sequence 5'-ACGCGT-3', and with strong affinity (K(eq)=2.3×10(7) M(-1)). However, the binding affinities varied according to the order: f-ImPy(*)Im (2)>f-ImPyIm (1)≥f-Im(*)PyIm (5) confirming that the second amino group can improve affinity, but its position within the polyamide can affect affinity. Copyright © 2012 Elsevier Ltd. All rights reserved.

Structural Basis for Recognition of L-lysine, L-ornithine, and L-2,4-diamino Butyric Acid by Lysine Cyclodeaminase.

Science.gov (United States)

Min, Kyungjin; Yoon, Hye-Jin; Matsuura, Atsushi; Kim, Yong Hwan; Lee, Hyung Ho

2018-04-30

L-pipecolic acid is a non-protein amino acid commonly found in plants, animals, and microorganisms. It is a well-known precursor to numerous microbial secondary metabolites and pharmaceuticals, including anticancer agents, immunosuppressants, and several antibiotics. Lysine cyclodeaminase (LCD) catalyzes β-deamination of L-lysine into L-pipecolic acid using β-nicotinamide adenine dinucleotide as a cofactor. Expression of a human homolog of LCD, μ-crystallin, is elevated in prostate cancer patients. To understand the structural features and catalytic mechanisms of LCD, we determined the crystal structures of Streptomyces pristinaespiralis LCD (SpLCD) in (i) a binary complex with NAD + , (ii) a ternary complex with NAD + and L-pipecolic acid, (iii) a ternary complex with NAD + and L-proline, and (iv) a ternary complex with NAD + and L-2,4-diamino butyric acid. The overall structure of SpLCD was similar to that of ornithine cyclodeaminase from Pseudomonas putida . In addition, SpLCD recognized L-lysine, L-ornithine, and L-2,4-diamino butyric acid despite differences in the active site, including differences in hydrogen bonding by Asp236, which corresponds with Asp228 from Pseudomonas putida ornithine cyclodeaminase. The substrate binding pocket of SpLCD allowed substrates smaller than lysine to bind, thus enabling binding to ornithine and L-2,4-diamino butyric acid. Our structural and biochemical data facilitate a detailed understanding of substrate and product recognition, thus providing evidence for a reaction mechanism for SpLCD. The proposed mechanism is unusual in that NAD + is initially converted into NADH and then reverted back into NAD + at a late stage of the reaction.

Influência das características estruturais sobre a processabilidade do polibutadieno alto cis Influence of structural characteristics on the high-cis polybutadiene processability

Directory of Open Access Journals (Sweden)

Ivana L. Mello

2004-01-01

Full Text Available Características físicas, tais como peso molecular, distribuição de peso molecular e ramificações, têm importância significativa na processabilidade do polibutadieno. Assim, deve haver um balanceamento dessas características a fim de se obter boas propriedades mecânicas e boa processabilidade. Este Trabalho apresenta uma breve revisão sobre a influência das características estruturais na processabilidade do polibutadieno produzido por diferentes sistemas catalíticos. São apresentadas também algumas técnicas encontradas na literatura para melhorar a processabilidade desse elastômero.Physical characteristics, such as, molecular weight, molecular weight distribution and branching, have a significant influence on polybutadiene processability. Thus, a balance should exist in these characteristics for good mechanical properties and processability. This work brings a brief review of the influence of structural characteristics on the processability of polybutadiene produced by different catalyst systems. Also presented are some techniques from the literature aimed at improving processability of this elastomer.

Mechanical Properties of Dynamically Vulcanized Thermoplastic Polyurethane (TPU/Polybutadiene Rubber (BR Blends

Directory of Open Access Journals (Sweden)

Ji-Hoo Kim

2017-01-01

Full Text Available To obtain thermoplastic polyurethane (TPU with low hardness, dynamically vulcanized TPU/polybutadiene rubber(BR(70/30 blends were prepared. The effect of dicumyl peroxide (DCP content and stabilizers on the tensile strength and elongation at break of the dynamically vulcanized blends was examined. The tensile strength and elongation at break of the dynamically vulcanized blends decrease with increasing content of DCP. The addition of optimal content of stabilizer leads to the improvement of tensile strength and elongation at break of the blends. Also, the effect of sulfur cure systems and accelerators on the tensile strength and elongation of the blends was investigated. The tensile strength and elongation at break of all the dynamically vulcanized TPU/BR (70/30 blends using 1-step processing are not higher than those of simple TPU/BR (70/30 blends. However, the tensile strength and elongation of the dynamically vulcanized blends prepared at 8 min (mixing time using 2-step processing are higher than those of the simple blends.

Radiation-induced crosslinking of syndiotactic 1,2-polybutadiene

International Nuclear Information System (INIS)

Iwai, Tadashi; Hoshino, Sadao; Yamamoto, Rokuro; Okamoto, Hidemasa; Obana, Kazuyoshi.

1978-01-01

Crystalline syndiotactic 1, 2-polybutadiene (hereafter abbreviated as 1, 2-PB) developed in Ube Industries, Ltd. by its own technology is a new thermoplastic resin belonging to the intermediate region between rubber and plastics in its flexibility. By selecting appropriate catalyst composition, 1, 2-PB having the melting point of 90 to 200 deg. C and crystallization of 10 to 65% can be obtained. These 1, 2-PBs can be worked to formed products by general thermoplastic forming methods such as injection molding, extrusion forming and blow forming. Radiation-crosslinked 1, 2-PB changed to very hard polymers through heat treatment. This change has been found to be radical chain reaction of cyclic polymerization. The relation of radiation-induced crosslinking and thermal expansion behavior, and the changes of appearance and structural and physical properties with heat treatment of these polymers are described. That is, specific gravity has increased, tensile strength has been enhanced, and elongation has decreased. While dielectric strength and arc resistivity have been upgraded. Therefore, these polymers can be used for the following applications: food wrapping film, molded notions, molded low foaming material for the soles of footwears, highly foaming moldings such as sponges, electric insulation material such as cable coating and adhesives for many materials. It is considered that crosslinking contributes to the application to electric insulation materials and heat curing to heat-resistant materials and parts. (Wakatsuki, Y.)

Laser ignitibility of insensitive secondary explosive 1,1-diamino-2,2-dinitroethene (FOX-7)

International Nuclear Information System (INIS)

Fang, Xiao; McLuckie, Warren G

2015-01-01

Highlights: • Carbon black (CB) is an efficient optical sensitizer compatible with 1,1-diamino-2,2-dinitroethene (FOX-7). • A CB doped insensitive explosive FOX-7 can be ignited by a low-power diode laser. • Laser ignitibility of the optically sensitized FOX-7 is mainly affected by laser power among the other parameters. • Inhomogeneities in the explosive affect laser ignition reliability. - Abstract: An experimental investigation into laser ignitibility of insensitive secondary explosives, 1,1-diamino-2,2-dinitroethene (FOX-7) has been carried out, using a diode laser of continuous wave at the laser wavelength of 974 nm. The direct optical ignition of an insensitive explosive will add more safety features to insensitive munitions (IM) or explosive devices. In this study, effects of laser parameters on the ignitibility were analysed in terms of laser ignition threshold, the times to initiate the ignition and full combustion, and burning sustainability. The results have shown that carbon black (CB) as an optical sensitizer is compatible with FOX-7, and significantly enhances laser ignitibility of the explosive when a small amount of CB is uniformly doped in FOX-7. The delay times for ignition and subsequent development of sustainable burning of the material are mainly determined by ignition laser power, although the other laser parameters have effects. The minimum laser power required to ignite the optically sensitized FOX-7 was found below 10 W and a fast ignition was initiated in as short as 70 μs by a laser power of 40 W. Also the effect of the mixture uniformity of FOX-7/CB on laser ignition performance was evaluated in this study

In-situ photocrosslinkable nanohybrid elastomer based on polybutadiene/polyhedral oligomeric silsesquioxane

Energy Technology Data Exchange (ETDEWEB)

Mirmohammadi, Seyed Amin, E-mail: mirmohammadi.sa@gmail.com [Department of Polymerization Engineering, Iran Polymer and Petrochemical Institute (IPPI), P. O. Box: 14965/115, Tehran (Iran, Islamic Republic of); Nekoomanesh-Haghighi, Mehdi, E-mail: m.nekoomanesh@ippi.ac.ir [Department of Polymerization Engineering, Iran Polymer and Petrochemical Institute (IPPI), P. O. Box: 14965/115, Tehran (Iran, Islamic Republic of); Mohammadian Gezaz, Somayyeh [Department of Chemical Engineering, Payame Noor University (PNU), P. O. Box: 19395-3697, Tehran (Iran, Islamic Republic of); Bahri-Laleh, Naeimeh [Department of Polymerization Engineering, Iran Polymer and Petrochemical Institute (IPPI), P. O. Box: 14965/115, Tehran (Iran, Islamic Republic of); Atai, Mohammad [Department of Polymer Science, Iran Polymer and Petrochemical Institute (IPPI), P. O. Box: 14965/115, Tehran (Iran, Islamic Republic of)

2016-11-01

Hydroxyl functionalized nano-sized POSS or ethyleneglycol as diol monomers was incorporated to hydroxyl-terminated polybutadiene (HTPBD) chain in the presence of fumaryl chloride as extender. Blue light photocrosslinking system based on camphorquinone (photoinitiator) and dimethylaminoethyl methacrylate (accelerator) was applied to cure these two synthesized fumarate based macromers. Self-crosslinkability of unsaturated macromers and also crosslinking in presence of a reactive diluent were investigated in absence and presence of 1,4-butanediol dimethacrylate, respectively. Finally, photocured samples were characterized by XRD, SEM, equilibrium swelling study, TGA, DMTA, AFM and cell culture. The results showed that incorporation of POSS nanoparticle into the polymer matrix with a perfect distribution and dispersion can enhance thermal stability, mechanical and biocompatibility properties which can prove a good potential of this in-situ photocrosslinkable nanohybrid in medical applications. - Highlights: • Polyhedral oligomeric silsesquioxane was incorporated to HTPBD by fumaryl chloride as extender. • A reactive diluent was used to improve photocrosslinking process of the unsaturated nanohybrid elastomers. • Nanohybrids showed enhanced properties such as thermal stability, mechanical and biocompatibility. • Improved properties were obtained for photocured samples in presence of reactive diluent.

Rheokinetic Analysis of Hydroxy Terminated Polybutadiene Based Solid Propellant Slurry

Directory of Open Access Journals (Sweden)

Abhay K Mahanta

2010-01-01

Full Text Available The cure kinetics of propellant slurry based on hydroxy-terminated polybutadiene (HTPB and toluene diisocyanate (TDI polyurethane reaction has been studied by viscosity build up method. The viscosity (ɳ–time (t plots conform to the exponential function ɳ = aebt, where a & b are empirical constants. The rate constants (k for viscosity build up at various shear rate (rpm, evaluated from the slope of dɳ/dt versus ɳ plots at different temperatures, were found to vary from 0.0032 to 0.0052 min-1. It was observed that the increasing shear rate did not have significant effect on the reaction rate constants for viscosity build up of the propellant slurry. The activation energy (Eɳ, calculated from the Arrhenius plots, was found to be 13.17±1.78 kJ mole-1, whereas the activation enthalpy (∆Hɳ* and entropy (∆Sɳ* of the propellant slurry, calculated from Eyring relationship, were found to be 10.48±1.78 kJ mole-1 and –258.51± 5.38 J mole-1K-1, respectively. The reaction quenching temperature of the propellant slurry was found to be -9 ° C, based upon the experimental data. This opens up an avenue for a “freeze-and-store”, then “warm-up and cast”, mode of manufacturing of very large solid rocket propellant grains.

2,3-Diamino­pyridinium 6-carb­oxy­pyridine-2-carboxyl­ate

Science.gov (United States)

Foroughian, Mahsa; Foroumadi, Alireza; Notash, Behrouz; Bruno, Giuseppe; Amiri Rudbari, Hadi; Aghabozorg, Hossein

2011-01-01

The asymmetric unit of the title proton-transfer compound, C5H8N3 +·C7H4NO4 −, consists of one mono-deprotonated pyridine-2,6-dicarb­oxy­lic acid as anion and one protonated 2,3-diamino­pyridine as cation. The crystal packing shows extensive O—H⋯O, N—H⋯O and N—H⋯N hydrogen bonds. Thre are also several π–π inter­actions between the anions and also between the cations [centriod–centroid distances = 3.6634 (7), 3.7269 (7), 3.6705 (7) and 3.4164 (7) Å]. PMID:22199823

N,N′-Dipyridoxyl(1,8-diamino-3,6-dioxaoctane Schiff-base: Synthesis, experimental and theoretical identification

Directory of Open Access Journals (Sweden)

M.J. Khoshkholgh

2013-05-01

Full Text Available The N,N′-dipyridoxyl(1,8-diamino-3,6-dioxaoctane (=H2L Schiff-base has been synthesized and characterized by IR, 1H NMR, mass spectrometry and elemental analysis. Its optimized geometry and theoretical vibrational frequencies have been computed using density functional theory (DFT method via the B3LYP functional. Also, its 1H and 13C NMR chemical shifts have been calculated at the same computational level. In optimized geometry of the H2L, the two pyridine rings are perpendicular to each other. The phenolic hydrogens are engaged in intramolecular-hydrogen bonds with the azomethine nitrogens.

Experimentally driven atomistic model of 1,2 polybutadiene

Energy Technology Data Exchange (ETDEWEB)

Gkourmpis, Thomas, E-mail: thomas.gkourmpis@borealisgroup.com [Polymer Science Centre, J. J. Thomson Physical Laboratory, Department of Physics, University of Reading, Reading RG6 6AF (United Kingdom); Mitchell, Geoffrey R. [Polymer Science Centre, J. J. Thomson Physical Laboratory, Department of Physics, University of Reading, Reading RG6 6AF (United Kingdom); Centre for Rapid and Sustainable Product Development, Institute Polytechnic Leiria, Marinha Grande (Portugal)

2014-02-07

We present an efficient method of combining wide angle neutron scattering data with detailed atomistic models, allowing us to perform a quantitative and qualitative mapping of the organisation of the chain conformation in both glass and liquid phases. The structural refinement method presented in this work is based on the exploitation of the intrachain features of the diffraction pattern and its intimate linkage with atomistic models by the use of internal coordinates for bond lengths, valence angles, and torsion rotations. Atomic connectivity is defined through these coordinates that are in turn assigned by pre-defined probability distributions, thus allowing for the models in question to be built stochastically. Incremental variation of these coordinates allows for the construction of models that minimise the differences between the observed and calculated structure factors. We present a series of neutron scattering data of 1,2 polybutadiene at the region 120–400 K. Analysis of the experimental data yields bond lengths for Cî—¸C and C î—» C of 1.54 Å and 1.35 Å, respectively. Valence angles of the backbone were found to be at 112° and the torsion distributions are characterised by five rotational states, a three-fold trans-skew± for the backbone and gauche± for the vinyl group. Rotational states of the vinyl group were found to be equally populated, indicating a largely atactic chan. The two backbone torsion angles exhibit different behaviour with respect to temperature of their trans population, with one of them adopting an almost all trans sequence. Consequently, the resulting configuration leads to a rather persistent chain, something indicated by the value of the characteristic ratio extrapolated from the model. We compare our results with theoretical predictions, computer simulations, RIS models and previously reported experimental results.

Hierarchical self-assembly of telechelic star polymers: from soft patchy particles to gels and diamond crystals

International Nuclear Information System (INIS)

Capone, Barbara; Coluzza, Ivan; Blaak, Ronald; Likos, Christos N; Verso, Federica Lo

2013-01-01

The design of self-assembling materials in the nanometer scale focuses on the fabrication of a class of organic and inorganic subcomponents that can be reliably produced on a large scale and tailored according to their vast applications for, e.g. electronics, therapeutic vectors and diagnostic imaging agent carriers, or photonics. In a recent publication (Capone et al 2012 Phys. Rev. Lett. 109 238301), diblock copolymer stars have been shown to be a novel system, which is able to hierarchically self-assemble first into soft patchy particles and thereafter into more complex structures, such as the diamond and cubic crystal. The self-aggregating single star patchy behavior is preserved from extremely low up to high densities. Its main control parameters are related to the architecture of the building blocks, which are the number of arms (functionality) and the fraction of attractive end-monomers. By employing a variety of computational and theoretical tools, ranging from the microscopic to the mesoscopic, coarse-grained level in a systematic fashion, we investigate the crossover between the formation of microstructure versus macroscopic phase separation, as well as the formation of gels and networks in these systems. We finally show that telechelic star polymers can be used as building blocks for the fabrication of open crystal structures, such as the diamond or the simple-cubic lattice, taking advantage of the strong correlation between single-particle patchiness and lattice coordination at finite densities. (paper)

2,4-Diamino-6-methyl-1,3,5-triazin-1-ium hydrogen oxalate

Directory of Open Access Journals (Sweden)

Bohari M. Yamin

2012-05-01

Full Text Available The title compound, C4H8N5+·C2HO4−, was obtained from the reaction of oxalic acid and 2,4-diamino-6-methyl-1,3,5-triazine. The protonated triazine ring is essentially planar with a maximum deviation of 0.035 (1 Å, but the hydrogen oxalate anion is less planar, with a maximum deviation of 0.131 (1 Å for both carbonyl O atoms. In the crystal, the ions are linked by intermolecular N—H...O, N—H...N, O—H...O and C—H...O hydrogen bonds, forming a three-dimensional network. Weak π–π [centroid–centroid distance = 3.763 Å] and C—O...π interactions [O...centroid = 3.5300 (16 Å, C—O...centroid = 132.19 (10°] are also present.

A novel and selective fluoride opening of aziridines by XtalFluor-E. synthesis of fluorinated diamino acid derivatives.

Science.gov (United States)

Nonn, Melinda; Kiss, Loránd; Haukka, Matti; Fustero, Santos; Fülöp, Ferenc

2015-03-06

The selective introduction of fluorine onto the skeleton of an aminocyclopentane or cyclohexane carboxylate has been developed through a novel and efficient fluoride opening of an activated aziridine ring with XtalFluor-E. The reaction proceeded through a stereoselective aziridination of the olefinic bond of a bicyclic lactam and regioselective aziridine ring opening with difluorosulfiliminium tetrafluoroborate with the neighboring group assistance of the sulfonamide moiety to yield fluorinated diamino acid derivatives. The method based on the selective aziridine opening by fluoride has been generalized to afford access to mono- or bicyclic fluorinated substances.

Bis[bis(3,5-diamino-1H-1,2,4-triazol-4-ium)copper(I)] tris(hexafluoridosilicate)

OpenAIRE

Marian Mys'kiv; Evgeny Goreshnik

2010-01-01

In the title compound, [Cu(C2H6N5)2]2(SiF6)3, the asymmetric unit is composed of one [Cu(HL)2]3+ cation (where L is 3,5-diamino-1,2,4-triazole) and one and a half SiF62− anions. The rather large positively charged guanazole ligand moiety promotes the low metal coordination number of 2 for the CuI atom. The compound was obtained using the electrochemical alternating-current technique starting from an ethanol–methanol solution of CuSiF6·4H2O and guanazole. In the cr...

High pressure-temperature polymorphism of 1,1-diamino-2,2-dinitroethylene

Science.gov (United States)

Bishop, M. M.; Chellappa, R. S.; Liu, Z.; Preston, D. N.; Sandstrom, M. M.; Dattelbaum, D. M.; Vohra, Y. K.; Velisavljevic, N.

2014-05-01

1,1-diamino-2,2-dinitroethylene (FOX-7) is a low sensitivity energetic material with performance comparable to commonly used secondary explosives such as RDX and HMX. At ambient pressure, FOX-7 exhibits complex polymorphism with at least three structurally distinct phases (α, β, and γ). In this study, we have investigated the high pressure-temperature stability of FOX-7 polymorphs using synchrotron mid-infrared (MIR) spectroscopy. At ambient pressure, our MIR spectra and corresponding differential scanning calorimetry (DSC) measurements confirmed the known α → β (~110 °C) and α → β (~160 °C) structural phase transitions; as well as, indicated an additional transition γ → (~210 °C), with the δ phase being stable up to ~251 °C prior to decomposition. In situ MIR spectra obtained during isobaric heating at 0.9 GPa, revealed a potential α → β transition that could occur as early as 180 °C, while β → β+δ phase transition shifted to ~300 °C with suppression of γ phase. Decomposition was observed slightly above 325 °C at 0.9 GPa.

Naphthalene Bis(4,8-diamino-1,5-dicarboxyl)amide Building Block for Semiconducting Polymers.

Science.gov (United States)

Eckstein, Brian J; Melkonyan, Ferdinand S; Manley, Eric F; Fabiano, Simone; Mouat, Aidan R; Chen, Lin X; Facchetti, Antonio; Marks, Tobin J

2017-10-18

We report a new naphthalene bis(4,8-diamino-1,5-dicarboxyl)amide (NBA) building block for polymeric semiconductors. Computational modeling suggests that regio-connectivity at the 2,6- or 3,7-NBA positions strongly modulates polymer backbone torsion and, therefore, intramolecular π-conjugation and aggregation. Optical, electrochemical, and X-ray diffraction characterization of 3,7- and 2,6-dithienyl-substituted NBA molecules and corresponding isomeric NBA-bithiophene copolymers P1 and P2, respectively, reveals the key role of regio-connectivity. Charge transport measurements demonstrate that while the twisted 3,7-NDA-based P1 is a poor semiconductor, the planar 2,6-functionalized NBA polymers (P2-P4) exhibit ambipolarity, with μ e and μ h of up to 0.39 and 0.32 cm 2 /(V·s), respectively.

Electronic and ionization spectra of 1,1-diamino-2,2-dinitroethylene, FOX-7.

Science.gov (United States)

Borges, Itamar

2014-03-01

Singlet, triplet and ionized states of the energetic molecule 1,1-diamino-2,2-dinitroethylene, known as FOX-7 or DADNE, were investigated using the symmetry-adapted-cluster configuration interaction (SAC-CI) ab initio wave function. The 20 computed singlet transitions, with 2 exceptions, were bright. The most intense singlet transitions were of the n₀→π type-typical of molecules having nitro groups. Fast intersystem crossing (ISC) from the 1¹A, 2¹A and 8¹A bright singlet transitions is possible. Other feasible ISC processes are discussed. The computed singlet and ionization spectra have similar features when compared to nitramide and N,N-dimethylnitramine molecules, which have only a nitro group. The ionization energies of the first 20 states have differences in comparison with Koopmans' energy values that can reach 3 eV. Moreover, the character of the first ionized states, dominated by single ionizations, is not the same when compared with the character resulting from application of Koopmans' theorem.

High pressure-temperature polymorphism of 1,1-diamino-2,2-dinitroethylene

International Nuclear Information System (INIS)

Bishop, M M; Dattelbaum, D M; Velisavljevic, N; Chellappa, R S; Liu, Z; Preston, D N; Sandstrom, M M; Vohra, Y K

2014-01-01

1,1-diamino-2,2-dinitroethylene (FOX-7) is a low sensitivity energetic material with performance comparable to commonly used secondary explosives such as RDX and HMX. At ambient pressure, FOX-7 exhibits complex polymorphism with at least three structurally distinct phases (α, β, and γ). In this study, we have investigated the high pressure-temperature stability of FOX-7 polymorphs using synchrotron mid-infrared (MIR) spectroscopy. At ambient pressure, our MIR spectra and corresponding differential scanning calorimetry (DSC) measurements confirmed the known α → β (∼110 °C) and α → β (∼160 °C) structural phase transitions; as well as, indicated an additional transition γ → (∼210 °C), with the δ phase being stable up to ∼251 °C prior to decomposition. In situ MIR spectra obtained during isobaric heating at 0.9 GPa, revealed a potential α → β transition that could occur as early as 180 °C, while β → β+δ phase transition shifted to ∼300 °C with suppression of γ phase. Decomposition was observed slightly above 325 °C at 0.9 GPa.

Effects of addition of surfactants on viscosity of uncured ammonium perchlorate(A/P)/hydroxyl-terminated polybutadiene (HTPB) propellant

Energy Technology Data Exchange (ETDEWEB)

Koga, M.; Hagihara, Y. [National Defense Academy, Kanagawa (Japan)

1998-08-31

In production of ammonium perchlorate (AP)/hydroxyl-terminated polybutadiene (HTPB) propellants, it is preferable that the uncured propellant has a low viscosity during the mixing and forming processes. In this study, effects of surfacant on viscosity of the uncured propellant are studied for a total of 11 types of surfacants. It is found that sodium lauryl sulfate decreases viscosity of the AP/HTPB mixture more efficiently than any other surfacants tested. Apparent viscosity decreases by 30%, and its optimum dosage will be 0.005wt% based on the mixture to sufficiently decrease viscosity of the mixture. Viscosity of the mixture can be also decreased by improving wettability between AP and HTPB prepolymer. Sodium lauryl sulfate also shows an effect of delaying the potlife, i.e., time extending from addition of a curing agent to a thermosetting resin until it is cured to be unserviceable. 6 refs., 4 figs., 2 tabs.

NMR study of the epoxidation of liquid hydrolyzed poly-butadiene and meta-chloro-per-benzoic acid; Estudo atraves de RMN da reacao de epoxidacao de polibutadieno liquido hidroxilado (PBLH) e acido m-cloro perbenzoico (AMCPB)

Energy Technology Data Exchange (ETDEWEB)

Aguiar, Marcelo [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Quimica; Akcelrud, L [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica; Menezes, Sonia Cabral de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

1994-12-31

This work presents a study concerning the selectivity of the different configurations of the double bond present in liquid hydrolyzed poly-butadiene towards the epoxidation reaction with meta-chloro-per-benzoic acid through hydrogen-1, carbon-13 NMR aiming the production of new materials, varying the epoxidation level 12 refs., 7 figs., 4 tabs.

Finite element implementation of a thermo-damage-viscoelastic constitutive model for hydroxyl-terminated polybutadiene composite propellant

Science.gov (United States)

Xu, Jinsheng; Han, Long; Zheng, Jian; Chen, Xiong; Zhou, Changsheng

2017-11-01

A thermo-damage-viscoelastic model for hydroxyl-terminated polybutadiene (HTPB) composite propellant with consideration for the effect of temperature was implemented in ABAQUS. The damage evolution law of the model has the same form as the crack growth equation for viscoelastic materials, and only a single damage variable S is considered. The HTPB propellant was considered as an isotropic material, and the deviatoric and volumetric strain-stress relations are decoupled and described by the bulk and shear relaxation moduli, respectively. The stress update equations were expressed by the principal stresses σ_{ii}R and the rotation tensor M, the Jacobian matrix in the global coordinate system J_{ijkl} was obtained according to the fourth-order tensor transformation rules. Two models having complex stress states were used to verify the accuracy of the constitutive model. The test results showed good agreement with the strain responses of characteristic points measured by a contactless optical deformation test system, which illustrates that the thermo-damage-viscoelastic model perform well at describing the mechanical properties of an HTPB propellant.

Development of cationically initiated UV curable coating systems based on cyclo-aliphatic diepoxide, ENR, epoxidized poly-butadiene and epoxidized soybean oil

International Nuclear Information System (INIS)

Kumar, R.N.; Quah, S.H.; Kong, K.W.; Rozman, H.D.; Tin, W.C.

1999-01-01

Epoxidized Natural Rubber (ENR) had been earlier found to impart toughness to otherwise brittle epoxy resin. Since the high viscosity of solutions of ENR in reactive solvent glycidyl methacrylate,imposed a limitation to the incorporation of higher percentages of the elastomer to the epoxy systems, experiments were initiated to employ the liquid elastomer, namely, epoxidized polybutadiene In the formulations. 'Mixture Design', a statistical experimental design, was adopted to study the effect of compositional and process variables on the curing of surface coatings formulated from the above system by UV radiation initiated by cationic photo-initiators. This paper also reports the results of the experiments carded out with epoxidized soybean oil Employed as a flexibilizer in the cycloaliphatic epoxy-ENR system

The methylcobalt(III) complex of a tetrapodal pentadentate amine ligand, 2,6-bis(1′,3′-diamino-2′-methyl-prop-2′-yl)pyridine

DEFF Research Database (Denmark)

Grohmann, Andreas; Heinemann, Frank W; Kofod, Pauli

1999-01-01

The pentaamine methylcobalt(III) compound [Co(pyN4)(CH3)](NO3)2 (pyN4=2,6-bis(1′,3′-diamino-2′-methyl-prop-2′-yl)pyridine) has been synthesised from [Co(NH3)5(CH3)](NO3)2 and pyN4 by ligand exchange, and characterised by IR, 1H, 13C and 59Co NMR spectroscopy as well as elemental analysis. The str......The pentaamine methylcobalt(III) compound [Co(pyN4)(CH3)](NO3)2 (pyN4=2,6-bis(1′,3′-diamino-2′-methyl-prop-2′-yl)pyridine) has been synthesised from [Co(NH3)5(CH3)](NO3)2 and pyN4 by ligand exchange, and characterised by IR, 1H, 13C and 59Co NMR spectroscopy as well as elemental analysis...... nitrogen atom, while the four equivalent primary amino groups take the equatorial positions. The other axial position, trans to the pyridine ring, is occupied by the methyl group. The Co–Npy bond length of 2.018(2) Å is significantly elongated compared with other cobalt(III) complexes of the pyN4 ligand...

Rigid-rod polyamides and polyimides derived from 4,3 ''-diamino-2 ',6 '-diphenyl- or di(4-biphenylyl)-p-terphenyl and 4-amino-4 ''-carboxy-2 ',6 '-diphenyl-p-terphenyl

NARCIS (Netherlands)

Spiliopoulos, IK; Mikroyannidis, JA; Tsivgoulis, GM

1998-01-01

4,3 "-Diamino-2',6'-diphenyl- or di(4-biphenylyl)p-terphenyl (3a or 3b) and 4-amino-4 "-carboxy-2',6'-diphenyl-p-terphenyl (6) were synthesized through pyrylium salts and used for the preparation of rigid-rod polyamides and polyimides. The polymers were characterized by inherent viscosity, elemental

Kinetics of reaction dimer fatty acid C_36 with 1,9 diamino nonane and determination of thermodynamic constants by use of thermogravimetric analysis tga, and rheological constants for the resulted polyamide

International Nuclear Information System (INIS)

Mohammad, H.; Falah, Al; Hammoy, M.

2014-01-01

Study the kinetics degradation of poly (dimeric acid C_36 with 1.9 – diamino nonane) was carried out by thermal analysis (TGA), and thermodynamic and equilibrium constants have been defined, moreover, study the kinetics of reaction between 1.9 – diamino nonane and dimer fatty acid C_36 was carried out in molten state, the reaction was performed at 160°, the acid value, and percentage of carboxylic functions of the product were determined. The polyamidation reaction was found to be of overall second order until conversion of 97% at 160°, then the order of reaction changes. The degree of dispersion, number molecular weight, weight molecular weight ,and viscosity molecular weight have been calculated during different times.The relationships between degree of dispersion, number Average molecular weight, weight average molecular weight, and viscosity molecular weight with time is linear at160°. Spectroscopy studies were carried out by infra-red and ultraviolet spectroscopy (author).

Theoretical Evaluation of Crosslink Density of Chain Extended Polyurethane Networks Based on Hydroxyl Terminated Polybutadiene and Butanediol and Comparison with Experimental Data

Science.gov (United States)

Sekkar, Venkataraman; Alex, Ancy Smitha; Kumar, Vijendra; Bandyopadhyay, G. G.

2018-01-01

Polyurethane networks between hydroxyl terminated polybutadiene (HTPB) and butanediol (BD) were prepared using toluene diisocyanate (TDI) as the curative. HTPB and BD were taken at equivalent ratios viz.: 1:0, 1:1, 1:2, 1:4, and 1:8. Crosslink density (CLD) was theoretically calculated using α-model equations developed by Marsh. CLD for the polyurethane networks was experimentally evaluated from equilibrium swell and stress-strain data. Young's modulus and Mooney-Rivlin approaches were adopted to calculate CLD from stress-strain data. Experimentally obtained CLD values were enormously higher than theoretical values especially at higher BD/HTPB equivalent ratios. The difference in the theoretical and experimental values for CLD was explained in terms of local crystallization due to the formation of hard segments and hydrogen bonded interactions.

Poly(3,6-diamino-9-ethylcarbazole) based molecularly imprinted polymer sensor for ultra-sensitive and selective detection of 17-β-estradiol in biological fluids.

Science.gov (United States)

Liu, Weilu; Li, Haifeng; Yu, Shangmin; Zhang, Jiaxing; Zheng, Weihua; Niu, Liting; Li, Gengen

2018-05-01

In this work, we reported the synthesis of 3, 6-diamino-9-ethylcarbazole and its application as a new monomer for preparation of molecularly imprinted polymer (MIP) electrochemical sensor. The as prepared MIP sensor exhibited ultrahigh sensitivity and selectivity for the detection of 17-β-estradiol in attomolar levels (1 × 10 -18 molL -1 ). The sensor works by detecting the change of the interfacial impedance that is derived from recognition of 17-β-estradiol on the MIP layer. The MIP sensor based on 3, 6-diamino-9-ethylcarbazole monomer revealed better performance than that of unmodified carbazole monomer. The monomer/template ratio, electropolymerization scanning cycles, and the incubation pH values were optimised in order to obtain the best detection efficiency. Under the optimised condition, the MIP sensor exhibits a wide linear range from 1aM to 10μM (1 × 10 -18 ̶ 1 × 10 -5 molL -1 ). A low detection limit of 0.36aM (3.6 × 10 -19 molL -1 ) and a good selectivity towards structurally similar compounds were obtained. The proposed MIP sensor also exhibits long-term stability and applicability in human serum samples. These advantages enabled this MIP sensor to be a promising alternative of electrochemical sensor and may be extended to detection of other endogenous compounds. Copyright © 2018 Elsevier B.V. All rights reserved.

Configuration and stability of 1, 1-diamino-2, 2-dinitrothylene (FOX-7) embedded in graphene

Energy Technology Data Exchange (ETDEWEB)

Wang, Yan Qun [College of Chemistry and Environmental Engineering, Yangtze University, Jingzhou (China); Wang, Gui Xiang [School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing (China)

2016-10-15

The configuration and stability of 1,1-diamino-2,2-dinitroethylene (FOX-7) embedded in graphene were studied using density functional theory with all-electron double numerical polarized basis sets. The results suggested that graphene had a greater impact on the planarity of FOX-7 molecules than did H-bonding. Under the synergistic effect of graphene and H-bonding, the geometry of H-bonded FOX-7 embedded in graphene was flatter than that of FOX-7 without H-bonds, which facilitated π–π stacking, as well as the stability of FOX-7 in graphene. The conjugated structure of FOX-7 contributed to its stability between layers of graphene. When the conjugated structure in FOX-7 was completely disrupted, the stabilization energy decreased by 48.6%. This theoretical work is useful for gaining new insights into the microscopic interaction of energetic molecules with graphene, and it will provide theoretical guidance for the encapsulation and storage of energetic materials.

Configuration and stability of 1, 1-diamino-2, 2-dinitrothylene (FOX-7) embedded in graphene

International Nuclear Information System (INIS)

Wang, Yan Qun; Wang, Gui Xiang

2016-01-01

The configuration and stability of 1,1-diamino-2,2-dinitroethylene (FOX-7) embedded in graphene were studied using density functional theory with all-electron double numerical polarized basis sets. The results suggested that graphene had a greater impact on the planarity of FOX-7 molecules than did H-bonding. Under the synergistic effect of graphene and H-bonding, the geometry of H-bonded FOX-7 embedded in graphene was flatter than that of FOX-7 without H-bonds, which facilitated π–π stacking, as well as the stability of FOX-7 in graphene. The conjugated structure of FOX-7 contributed to its stability between layers of graphene. When the conjugated structure in FOX-7 was completely disrupted, the stabilization energy decreased by 48.6%. This theoretical work is useful for gaining new insights into the microscopic interaction of energetic molecules with graphene, and it will provide theoretical guidance for the encapsulation and storage of energetic materials

Composition and mechanisms analysis of aromatic telechelic oligomers by mass spectroscopy; Analyse de la composition et de mecanismes de polymerisation d`oligomeres telecheliques aromatiques par spectrometrie de masse

Energy Technology Data Exchange (ETDEWEB)

Damerval, V.

1997-10-22

The aim of this work was to apply mass spectrometry, on the one hand to the characterization of telechelic oligo-imides with oxazoline and lactane end-caps and, on the other hand to the determination of the thermal reticulation mechanism of nadimides. First bis-oxazoline and buslactane end-capped, oligomers used to form blocks copolymers were studied by liquid secondary ion mass spectroscopy (LSIMS) and Matrix-assisted laser desorption ionization time of flight spectroscopy (MALDI-TOF). An acetamide end-cap by-product was detected. Then the analysis was modified to avoid the formation of this by-product which was unable to copolymerize. Secondly, to circumvent the experimental difficulties related to crosslinked networks, the study of the thermal polymerization of nadimides was performed ones (LSIMS, electroscopy, MALDI-TOF) led to the determination of the polynadimide structure. Thanks to MS/MS studies the nature of the linkages and the structure of the end-caps were established. Finally, this work evidenced the opportunity to use mass spectrometry to analyze synthetic polymers. (author) 222 refs.

High Pressure-Temperature Phase Diagram of 1,1-diamino-2,2-dinitroethylene

Science.gov (United States)

Bishop, Matthew; Chellappa, Raja; Liu, Zhenxian; Preston, Daniel; Sandstrom, Mary; Dattelbaum, Dana; Vohra, Yogesh; Velisavljevic, Nenad

2013-06-01

1,1-diamino-2,2-dinitroethelyne (FOX-7) is a less sensitive energetic material with performance comparable to commonly used secondary explosives such as RDX and HMX. At ambient pressure, FOX-7 exhibits complex polymorphism with at least three structurally distinct phases (α, β, and γ) . In this study, we have investigated the high P-T stability of FOX-7 polymorphs using synchrotron mid-infrared (MIR) spectroscopy. At ambient pressure, our MIR spectra confirmed the known α --> β (110 °C) and β --> γ (160 °C) phase transitions; as well as, indicated an additional phase transition, γ --> δ (210°C), with the δ phase being stable up to 250 °C prior to melt/decomposition. In situ MIR spectra obtained during isobaric heating at 0.9 GPa revealed that the α --> β transition occurs at 180 °C, while β --> β + δ phase transition shifted to 300 °C with suppression of γ phase. Decomposition was observed above 325 °C. Based on multiple high P-T measurements, we have established the first high P-T phase diagram of FOX-7. This work was, in part, supported by the US DOE under contract No. DE-AC52-06NA25396 and Science Campaign 2 Program. MB acknowledges additional support from the NSF BD program. Use of NSLS (DE-AC02-98CH10886) beamline U2A (COMPRES, No.EAR01-35554, CDAC).

A carbon-supported copper complex of 3,5-diamino-1,2,4-triazole as a cathode catalyst for alkaline fuel cell applications.

Science.gov (United States)

Brushett, Fikile R; Thorum, Matthew S; Lioutas, Nicholas S; Naughton, Matthew S; Tornow, Claire; Jhong, Huei-Ru Molly; Gewirth, Andrew A; Kenis, Paul J A

2010-09-08

The performance of a novel carbon-supported copper complex of 3,5-diamino-1,2,4-triazole (Cu-tri/C) is investigated as a cathode material using an alkaline microfluidic H(2)/O(2) fuel cell. The absolute Cu-tri/C cathode performance is comparable to that of a Pt/C cathode. Furthermore, at a commercially relevant potential, the measured mass activity of an unoptimized Cu-tri/C-based cathode was significantly greater than that of similar Pt/C- and Ag/C-based cathodes. Accelerated cathode durability studies suggested multiple degradation regimes at various time scales. Further enhancements in performance and durability may be realized by optimizing catalyst and electrode preparation procedures.

Evaluation of the effects of initiator and solvent used in polymerization in the structure of liquid hydrolyzed poly-butadiene; Avaliacao dos efeitos da concentracao de iniciador e de solvente utilizados na polimerizacao sobre a estrutura de polibutadieno liquido hidroxilado (PBLH)

Energy Technology Data Exchange (ETDEWEB)

Vilar, Walter Dias; Akcelrud, L [Universidade Federal, Rio de Janeiro, RJ (Brazil). Escola de Quimica; Menezes, Sonia Cabral de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

1994-12-31

The liquid hydrolyzed poly-butadiene is a product obtained by the polymerization of 1,3 butadiene by free radical initiated by H{sub 2} O{sub 2} using alcohol as solvent. This work aims to verify if increases in the initiator concentration cause structural variations in the resulting product. The role of the solvent was also studied. Results are presented and discussed 9 refs., 2 tabs.

Oxidation of 5,6-diamino-1,3-dimethyl-2,4-dioxopyrimidine by perrhenate: the crystal structure of 1,3,6,8-tetramethylpyrimidopteridine-2,4,5,7-tetrone

International Nuclear Information System (INIS)

Booysen, Irvin; Gerber, Thomas I.A.; Mayer, Peter

2008-01-01

The oxidation of 5,6-diamino-1,3-dimethyl-2,4-dioxopyrimidine (H 2 ddd) by perrhenate (ReO 4 - ) led to the formation of 1,3-dimethylalloxan, which condenses with unoxidized H 2 ddd to yield the product 1,3,6,8-tetramethylpyrimidopteridine-2,4,5,7-tetrone (tppt). The structure of tppt consists of a central pyrazine ring and two terminal pyrimidine rings in cis positions. The dihedral angles between the pyrazine and pyrimidine rings are 1.08 deg and 1.20 deg. (author)

Burning Characteristics of Ammonium-Nitrate-Based Composite Propellants with a Hydroxyl-Terminated Polybutadiene/Polytetrahydrofuran Blend Binder

Directory of Open Access Journals (Sweden)

Makoto Kohga

2012-01-01

Full Text Available Ammonium-nitrate-(AN- based composite propellants prepared with a hydroxyl-terminated polybutadiene (HTPB/polytetrahydrofuran (PTHF blend binder have unique thermal decomposition characteristics. In this study, the burning characteristics of AN/HTPB/PTHF propellants are investigated. The specific impulse and adiabatic flame temperature of an AN-based propellant theoretically increases with an increase in the proportion of PTHF in the HTPB/PTHF blend. With an AN/HTPB propellant, a solid residue is left on the burning surface of the propellant, and the shape of this residue is similar to that of the propellant. On the other hand, an AN/HTPB/PTHF propellant does not leave a solid residue. The burning rates of the AN/HTPB/PTHF propellant are not markedly different from those of the AN/HTPB propellant because some of the liquefied HTPB/PTHF binder cover the burning surface and impede decomposition and combustion. The burning rates of an AN/HTPB/PTHF propellant with a burning catalyst are higher than those of an AN/HTPB propellant supplemented with a catalyst. The beneficial effect of the blend binder on the burning characteristics is clarified upon the addition of a catalyst. The catalyst suppresses the negative influence of the liquefied binder that covers the burning surface. Thus, HTPB/PTHF blend binders are useful in improving the performance of AN-based propellants.

Synchrotron SAXS studies on morphology formation in a binary blend of poly(ε-caprolactone) homopolymer and poly(ε-caprolactone)-block-polybutadiene copolymer

International Nuclear Information System (INIS)

Akaba, Michiaki; Nojima, Shuichi

2005-01-01

The process of morphology formation in a binary blend of poly(ε-caprolactone) homopolymer (PCL) and poly(ε-caprolactone)-block-polybutadiene copolymer (PCL-b-PB) has been investigated by synchrotron small-angle X-ray scattering (SR-SAXS). This blend shows an UCST-type phase separation and the crystallization of PCL chains (i.e., PCL and PCL blocks in PCL-b-PB) at a same temperature range, so that these two factors may work simultaneously to yield a complicated morphology formation. When the weight fraction of PCL (φ PCL ) is small (φ PCL PCL > 0.8), the blend can directly be quenched into crystallization temperatures without passing through the UCST region. Time-resolved SAXS curves in this case show that overall morphology formation is driven by the crystallization of PCL chains, where a crystallized PCL region always coexists with a crystallized PCL-b-PB region and the volume ratio of two regions is constant throughout. (author)

Synthesis and Biological Activities on Metal Complexes of 2,5-Diamino-1,3,4-thiadiazole Derived from Semicarbazide Hydrochloride

Directory of Open Access Journals (Sweden)

Matthew A. Adebayo

2011-07-01

Full Text Available A bioactive ligand, 2,5-diamino-1,3,4-thiadiazole (L, derived from semicarbazide hydrochloride, and its metal complexes were prepared and characterized. The complexes were characterized using elemental, infra-red, ultraviolet/visible, magnetic moment, atomic absorption, thin layer chromatography and molar conductance measurements. The IR data revealed that the ligand (L behaved as a tridentate neutral ligand. It coordinated to the metal ion via sulphur and nitrogen of the amines. The molar conductance data reveal that the chelates are non-electrolytes. From the Ultraviolet/Visible spectra and magnetic moment data, the complexes were found to have octahedral geometrical structure. In vivo evaluation of the antimicrobial activities of the metal complexes and the ligands showed greater activity against some micro-organisms when compared to the parent compounds. The chelates do not show toxicity against the activities of enzymes from homogenates of liver, kidney and serum in experimental rats.

Closed-loop thrust and pressure profile throttling of a nitrous oxide/hydroxyl-terminated polybutadiene hybrid rocket motor

Science.gov (United States)

Peterson, Zachary W.

Hybrid motors that employ non-toxic, non-explosive components with a liquid oxidizer and a solid hydrocarbon fuel grain have inherently safe operating characteristics. The inherent safety of hybrid rocket motors offers the potential to greatly reduce overall operating costs. Another key advantage of hybrid rocket motors is the potential for in-flight shutdown, restart, and throttle by controlling the pressure drop between the oxidizer tank and the injector. This research designed, developed, and ground tested a closed-loop throttle controller for a hybrid rocket motor using nitrous oxide and hydroxyl-terminated polybutadiene as propellants. The research simultaneously developed closed-loop throttle algorithms and lab scale motor hardware to evaluate the fidelity of the throttle simulations and algorithms. Initial open-loop motor tests were performed to better classify system parameters and to validate motor performance values. Deep-throttle open-loop tests evaluated limits of stable thrust that can be achieved on the test hardware. Open-loop tests demonstrated the ability to throttle the motor to less than 10% of maximum thrust with little reduction in effective specific impulse and acoustical stability. Following the open-loop development, closed-loop, hardware-in-the-loop tests were performed. The closed-loop controller successfully tracked prescribed step and ramp command profiles with a high degree of fidelity. Steady-state accuracy was greatly improved over uncontrolled thrust.

The use of gamma irradiation in preparation of polybutadiene rubber nanopowder; Its effect on particle size, morphology and crosslink structure of the powder

Science.gov (United States)

Rezaei Abadchi, Majid; Jalali-Arani, Azam

2014-02-01

The aim of this work was the preparation and characterization of polybutadiene rubber (BR) powder by irradiating of rubber lattices using 60Co radiation and spray-drying of them at the appropriate condition. The influences of absorbed dose on the volume swelling ratio, molecular weight between crosslinks, gel fraction, and glass transition temperature of obtained powder were studied. Morphology, size and size distribution of rubber particles were examined by using scanning electron microscopy (SEM) and laser particle size analyzer (LPSA) technique, respectively. Results obtained by LPSA revealed that radiation has no effect on particle size of rubber latex but after drying, adherence properties of rubber particle causes increase in particle size of rubber powder, as shown in SEM photograph. Fourier transform infrared spectroscopy of rubber powders confirmed that with increasing the irradiation dose, characteristic peak corresponds to the >Cdbnd C< double bands decreased. Also Charlesby-Pinner equation was used to evaluate radiation yield.

Influence of (1,3-phenylene)bis(3-methyl-1-phenyl pentylidene)dilithium initiator concentration on the modality of polybutadiene

KAUST Repository

Vasilakopoulos, Thodoris C.; Hadjichristidis, Nikolaos

2012-01-01

The strong influence of (1,3-phenylene)bis(3-methyl-1-phenyl pentylidene)dilithium initiator (DLI) concentration on the modality of polybutadiene (PBd) in the presence of lithium s-butoxide (s-BuOLi) in benzene, at room temperature, has been studied. The quality of DLI has been evaluated by gas chromatography-mass spectrometry (GC-MS) and 1H NMR. Keeping s-BuOLi/C-Li ratio (R) close to unity, at relatively high DLI concentrations (C > 7 × 10-4 M), monomodal high 1,4-PBds with polydispersity index less than 1.07 were obtained, whereas bimodal ones at lower concentrations (C < 6 × 10-4 M). The effect of C-Li concentration on the modality of PBd has been evaluated using size exclusion chromatography on samples taken during and at the end of the polymerization. Viscosity observations have also been used to further support the results. The bimodality of PBd has been attributed to partially terminated difunctional species because of the inevitable presence of protic impurities in the polymerization solution, although high vacuum technique was used, which becomes more significant at low initiator concentrations. Moreover, the strong influence of s-BuOLi on the microstructure of PBd has been demonstrated by 1H NMR. © 2012 Wiley Periodicals, Inc.

Influence of (1,3-phenylene)bis(3-methyl-1-phenyl pentylidene)dilithium initiator concentration on the modality of polybutadiene

KAUST Repository

Vasilakopoulos, Thodoris C.

2012-11-26

The strong influence of (1,3-phenylene)bis(3-methyl-1-phenyl pentylidene)dilithium initiator (DLI) concentration on the modality of polybutadiene (PBd) in the presence of lithium s-butoxide (s-BuOLi) in benzene, at room temperature, has been studied. The quality of DLI has been evaluated by gas chromatography-mass spectrometry (GC-MS) and 1H NMR. Keeping s-BuOLi/C-Li ratio (R) close to unity, at relatively high DLI concentrations (C > 7 × 10-4 M), monomodal high 1,4-PBds with polydispersity index less than 1.07 were obtained, whereas bimodal ones at lower concentrations (C < 6 × 10-4 M). The effect of C-Li concentration on the modality of PBd has been evaluated using size exclusion chromatography on samples taken during and at the end of the polymerization. Viscosity observations have also been used to further support the results. The bimodality of PBd has been attributed to partially terminated difunctional species because of the inevitable presence of protic impurities in the polymerization solution, although high vacuum technique was used, which becomes more significant at low initiator concentrations. Moreover, the strong influence of s-BuOLi on the microstructure of PBd has been demonstrated by 1H NMR. © 2012 Wiley Periodicals, Inc.

"Estudo in vitro do potencial cariostático dos selantes resinosos, dos cimentos ionoméricos, do diamino fluoreto de prata e do verniz fluoretado, aplicados em superfície oclusal de molares permanentes humanos".

OpenAIRE

Thereza Christina Lopes Coutinho

2002-01-01

O objetivo deste trabalho foi avaliar, in vitro, ao Microscópio de Luz Polarizada (MLP), o potencial cariostático dos selantes resinosos, dos cimentos ionoméricos, do diamino fluoreto de prata e do verniz fluoretado aplicados em superfície oclusal de molares permanentes humanos. Para tanto, 70 terceiros molares humanos hígidos, extraídos por razões clínicas, foram divididos aleatoriamente em sete grupos (N=10): GI – controle (sem selamento); GII – selante resinoso sem flúor Delton ®; G III – ...

HPLC Determination of α-Keto Acids from Human Serum Using 2, 3-Diamino-2, 3- Dimethyl Butane as Derivatizing Reagent

International Nuclear Information System (INIS)

Mahar, K.P.; Shar, G.Q.; Khuhawar, M.Y.; Abbasi, K.U.; Azmat, R.; Jameel Ahmed Biag, J.A.

2013-01-01

Seven α-keto acids, pyruvic acid (PYR), 2-oxobutyric acid (KB), 3-methyl-2-oxobutyric acid (MKBA), 3-methyl-2-oxovaleric acid (K3MVA), 4-methyl-2-oxovaleric acid (K4MVA), 2-oxoglutaric acid (KG) and Phenyl pyruvic acid (PPY) as derivatives of 2,3-diamino-2,3-dimethybutane (DDB) were separated by HPLC column Zorbax C-18 (4.6x150 mm-id). The compounds were eluted with methanol-water-acetonitrile (40:58:2 V/V/V) with flow rate 1 ml/min. UV detection was carried out by photodiode array at 255 nm. Linear calibration plots were obtained with 0.1 to 60 μg/ml with limits of detection (LoD) within 0.04-0.4 μg/ml. The method was applied for the analysis of α-keto acids from serum of diabetic patients with blood glucose level 430-458 mg/dl and healthy volunteers. The amounts of α-keto acids observed 3.24-9.71 μg/ml with RSD 1.1-1.9 percentage in diabetic patients were higher than healthy volunteer's 0.11-1.3 μg/ml with RSD 0.9-2.6 percentage. (author)

Effect of charged and excited states on the decomposition of 1,1-diamino-2,2-dinitroethylene molecules

International Nuclear Information System (INIS)

Kimmel, Anna V.; Sushko, Peter V.; Shluger, Alexander L.; Kuklja, Maija M.

2007-01-01

The authors have calculated the electronic structure of individual 1,1-diamino-2,2-dinitroethylene molecules (FOX-7) in the gas phase by means of density functional theory with the hybrid B3LYP functional and 6-31+G(d,p) basis set and considered their dissociation pathways. Positively and negatively charged states as well as the lowest excited states of the molecule were simulated. They found that charging and excitation can not only reduce the activation barriers for decomposition reactions but also change the dominating chemistry from endo- to exothermic type. In particular, they found that there are two competing primary initiation mechanisms of FOX-7 decomposition: C-NO 2 bond fission and C-NO 2 to CONO isomerization. Electronic excitation or charging of FOX-7 disfavors CONO formation and, thus, terminates this channel of decomposition. However, if CONO is formed from the neutral FOX-7 molecule, charge trapping and/or excitation results in spontaneous splitting of an NO group accompanied by the energy release. Intramolecular hydrogen transfer is found to be a rare event in FOX-7 unless free electrons are available in the vicinity of the molecule, in which case HONO formation is a feasible exothermic reaction with a relatively low energy barrier. The effect of charged and excited states on other possible reactions is also studied. Implications of the obtained results to FOX-7 decomposition in condensed state are discussed

Determination of acrolein in serum by high-performance liquid chromatography with fluorescence detection after pre-column fluorogenic derivatization using 1,2-diamino-4,5-dimethoxybenzene.

Science.gov (United States)

Imazato, Takahiro; Kanematsu, Mariko; Kishikawa, Naoya; Ohyama, Kaname; Hino, Takako; Ueki, Yukitaka; Maehata, Eisuke; Kuroda, Naotaka

2015-09-01

Acrolein is a major unsaturated aldehyde that is generated during the lipid peroxidation process. The measurement of acrolein in biological samples should be useful to estimate the degree of lipid peroxidation and to evaluate the effect of hazardous properties of acrolein on human health. In this study, a highly sensitive and selective high-performance liquid chromatography with fluorescence detection method was developed for the determination of acrolein in human serum. The proposed method involves the pre-column fluorogenic derivatization of acrolein with 1,2-diamino-4,5-dimethoxybenzene (DDB) as a reagent. The fluorescent derivative of acrolein could be detected clearly without any interfering reagent blank peaks because DDB does not have intrinsic fluorescence itself, and the detection limit was 10 nM (signal-to-noise ratio = 3). The proposed method could selectively detect acrolein in human serum with a simple protein precipitation treatment. Copyright © 2015 John Wiley & Sons, Ltd.

Relaxation processes and glass transition of confined polymer melts: A molecular dynamics simulation of 1,4-polybutadiene between graphite walls.

Science.gov (United States)

Solar, M; Binder, K; Paul, W

2017-05-28

Molecular dynamics simulations of a chemically realistic model for 1,4-polybutadiene in a thin film geometry confined by two graphite walls are presented. Previous work on melts in the bulk has shown that the model faithfully reproduces static and dynamic properties of the real material over a wide temperature range. The present work studies how these properties change due to nano-confinement. The focus is on orientational correlations observable in nuclear magnetic resonance experiments and on the local intermediate incoherent neutron scattering function, F s (q z , z, t), for distances z from the graphite walls in the range of a few nanometers. Temperatures from about 2T g down to about 1.15T g , where T g is the glass transition temperature in the bulk, are studied. It is shown that weakly attractive forces between the wall atoms and the monomers suffice to effectively bind a polymer coil that is near the wall. For a wide regime of temperatures, the Arrhenius-like adsorption/desorption kinetics of the monomers is the slowest process, while very close to T g the Vogel-Fulcher-Tammann-like α-relaxation takes over. The α-process is modified only for z≤1.2 nm due to the density changes near the walls, less than expected from studies of coarse-grained (bead-spring-type) models. The weakness of the surface effects on the glass transition in this case is attributed to the interplay of density changes near the wall with the torsional potential. A brief discussion of pertinent experiments is given.

Polibutadieno alto-cis: estudo viscosimétrico em tolueno e ciclo-hexano High-cis polybutadiene: viscometric study in toluene and cyclohexane

Directory of Open Access Journals (Sweden)

Ivana L. Mello

2006-03-01

toluene and cyclohexane solutions, at 30 °C, were carried out on high-cis polybutadiene synthesized with neodymium catalysts. Six different equations were employed to calculate intrinsic viscosity values and viscometric constants: Huggins; Kraemer; Martin and Schulz-Blaschke, by graphic extrapolation; and Solomon-Ciuta; Deb-Chanterjee; and again Schulz-Blaschke, by single point determination. The values obtained for intrinsic viscosity in both solvents and also the molecular weight (in toluene, calculated by applying Mark-Houwink-Sakurada equation, were compared in order to verify the validity of single point determination, which was confirmed. Solomon-Ciuta equation seemed to be suitable for toluene solutions whereas the Deb-Chanterjee equation was adequate for cyclohexane solutions. End-to-end distances of polymeric chains were also determined by applying Flory equation. Based on the higher values of intrinsic viscosity and end-to-end distance of polymeric chains for all samples in toluene, the latter was found to be better solvent than cyclohexane for polybutadiene.

The use of gamma irradiation in preparation of polybutadiene rubber nanopowder; Its effect on particle size, morphology and crosslink structure of the powder

Energy Technology Data Exchange (ETDEWEB)

Rezaei Abadchi, Majid; Jalali-Arani, Azam, E-mail: ajalali@aut.ac.ir

2014-02-01

Highlights: • Vulcanized rubber powders were prepared by spray drying of irradiated rubber latexes. • Influence of absorbed dose on powder structure and characteristics was investigated. • The size of rubber latex particles did not changed by irradiation. • Crosslink density increased by increasing dose and 98% gel was obtained at 150 kGy. • T{sub g} of rubber powder increased with increasing the irradiation dose. -- Abstract: The aim of this work was the preparation and characterization of polybutadiene rubber (BR) powder by irradiating of rubber lattices using {sup 60}Co radiation and spray-drying of them at the appropriate condition. The influences of absorbed dose on the volume swelling ratio, molecular weight between crosslinks, gel fraction, and glass transition temperature of obtained powder were studied. Morphology, size and size distribution of rubber particles were examined by using scanning electron microscopy (SEM) and laser particle size analyzer (LPSA) technique, respectively. Results obtained by LPSA revealed that radiation has no effect on particle size of rubber latex but after drying, adherence properties of rubber particle causes increase in particle size of rubber powder, as shown in SEM photograph. Fourier transform infrared spectroscopy of rubber powders confirmed that with increasing the irradiation dose, characteristic peak corresponds to the >C=C< double bands decreased. Also Charlesby–Pinner equation was used to evaluate radiation yield.

The use of gamma irradiation in preparation of polybutadiene rubber nanopowder; Its effect on particle size, morphology and crosslink structure of the powder

International Nuclear Information System (INIS)

Rezaei Abadchi, Majid; Jalali-Arani, Azam

2014-01-01

Highlights: • Vulcanized rubber powders were prepared by spray drying of irradiated rubber latexes. • Influence of absorbed dose on powder structure and characteristics was investigated. • The size of rubber latex particles did not changed by irradiation. • Crosslink density increased by increasing dose and 98% gel was obtained at 150 kGy. • T g of rubber powder increased with increasing the irradiation dose. -- Abstract: The aim of this work was the preparation and characterization of polybutadiene rubber (BR) powder by irradiating of rubber lattices using 60 Co radiation and spray-drying of them at the appropriate condition. The influences of absorbed dose on the volume swelling ratio, molecular weight between crosslinks, gel fraction, and glass transition temperature of obtained powder were studied. Morphology, size and size distribution of rubber particles were examined by using scanning electron microscopy (SEM) and laser particle size analyzer (LPSA) technique, respectively. Results obtained by LPSA revealed that radiation has no effect on particle size of rubber latex but after drying, adherence properties of rubber particle causes increase in particle size of rubber powder, as shown in SEM photograph. Fourier transform infrared spectroscopy of rubber powders confirmed that with increasing the irradiation dose, characteristic peak corresponds to the >C=C< double bands decreased. Also Charlesby–Pinner equation was used to evaluate radiation yield

Synthesis, photoluminescence and forensic applications of blue light emitting azomethine-zinc (II complexes of bis(salicylidenecyclohexyl-1,2-diamino based organic ligands

Directory of Open Access Journals (Sweden)

M. Srinivas

2017-06-01

Full Text Available Various azomethine-zinc(II complexes (3a-c of bis(salicylidenecyclohexyl-1,2-diamino organic ligands were synthesized by one pot reaction of salicylaldehydes/2-hydroxy-1-naphthaldehyde (2 eq, cyclohexyl-1,2-diamine (1 eq and zinc acetate (1 eq in methanol solvent at reflux temperature. The synthesized complexes were characterized by FTIR, 1H NMR, and SEM. Their photophysical properties such as Photoluminescence (PL and Diffused Reflectance Spectra (DRS were studied. PL studies revealed that the emission peaks of the complexes in both solution and solid states appeared to occur at 395–600 nm and emitted blue light. The band gap energies determined from DRS were 2.98 eV (3a, 2.91 eV (3b, and 2.73 eV (3c. Based on these results, we ascertain that these Zn(II complexes can serve as a suitable non-dopant blue light emitting compound for flat panel display applications. Latent fingerprint detection study indicated that the powder compounds show good adhesion and finger ridge details without background staining. The demonstrated method can be applied to detect fingerprints on all types of smooth surfaces.

Etoricoxib selective sensor based on uracil-5,6-diamino-2-thio hydrochloride as neutral carrier for potentiometric analysis in pharmaceutical preparations

Directory of Open Access Journals (Sweden)

Salwa Fares Rassi

2016-06-01

Full Text Available A construction and electrochemical behavior of novel potentiometric membrane sensor responsive to the etoricoxib was described. The sensor was based on the ion-pair complex of etoricoxib (ET with Uracil-5,6-diamino-2-thio hydrochloride UDTH (ET-UDTH as exchange sites in a PVC matrix with different plasticizers dibutylphthalate (DBP (electrode B tri-n-butylphosphate (TBP (electrode C, and dioctylphthalate (DOP (electrode A. The electrodes exhibited near-Nernstian response for ET-UDTH over the concentration range 0.051-40.042 mM. The electrode offered significant advantages including long lifetime (about 2 months, excellent stability and reproducibility, good response time (10-25 s, and wide pH working range (pH 5-12. Selectivity coefficients of ET related to a number of interfering cation and some organic compounds were investigated, and there were negligible interference caused by most of the investigated species. The direct determination of 0.5-10 mM of ET showed an average recovery of 99.03-101.75% and a mean relative standard deviation 0.40-1.88. The results were obtained by determination of ET in tablets using the proposed electrodes which were comparable favorably with those obtained by spectrophotometric method

Study the influence of reacted aliphatic amine series length on its kinetic reaction with dimeric fatty acid C36 and properties of resulted polyamide

International Nuclear Information System (INIS)

Al-Mohammad, H.; Falah, A.; Al-Hammoy, M.

2013-01-01

Kinetic studies were carried out on the reaction between dimeric fatty acid C 3 6 with 1.3 Diamino propane and 1.4 Diamino butane and 1.6 Diamino hexane and 1.8 Diamino octane in molten phase. The reaction was performed at 145 o C. The polyamidation reaction was found to be on the overall a second order up to 83% conversion for reaction dimeric fatty acid C-36 with 1.3 Diamino propane and 86% conversion for reaction dimeric fatty acid C 3 6 with 1.4 Diamino butane and 87% conversion for reaction dimeric fatty acid C 3 6 with 1.6 Diamino hexane and 1.8 Diamino octane then the reaction order changes to the third order above last conversion. The degree of polymerization,number average molecular weight and weight average molecular weight have been calculated during different times. Their relationships with the times are linear until last conversion. The melting point and thermodynamic constants for melting are determined by use of differential scanning calorimetry DSC. The melting point and thermodynamic constants increase by increasing the length of reacted amine series. (author)

Vicarious nucleophilic substitution to prepare 1,3-diamino-2,4,6-trinitrobenzene or 1,3,5-triamino-2,4,6-trinitrobenzene

Science.gov (United States)

Mitchell, Alexander R.; Pagoria, Philip F.; Schmidt, Robert D.

1996-01-01

The present invention relates to a process to produce 1,3-diamino-2,4,6-trinitrobenzene (DATB) or 1,3,5-triamino-2,4,6,-trinitrobenzene (TATB) by: (a) reacting at ambient pressure and a temperature of between about 0.degree. and 50.degree. C. for between about 0.1 and 24 hr, a trinitroaromatic compound of structure V: ##STR1## wherein X, Y, and Z are each independently selected from --H, or --NH.sub.2, with the proviso that at least 1 or 2 of X, Y, and Z are hydrogen, with an amount effective to produce DATB or TATB of 1,1,1-trialkylhydrazinium halide wherein alkyl is selected from methyl, ethyl, propyl or butyl and halide is selected from chloride, bromide or iodide. in the presence of a strong base selected from sodium butoxide, potassium butoxide, potassium propoxide, sodium propoxide, sodium ethoxide, potassium ethoxide, sodium methoxide, potassium methoxide, and combinations thereof; in a solvent selected from the group consisting of methanol, ethanol, propanol, butanol, dimethylsulphoxide, N-methylpyrrolidone, hexamethylphosphoramide, dimethylformide, dimethylacetamide and mixtures thereof, provided that when alcohols are present primarily DATB and picramide is formed; and (b) isolating the DATB or TATB produced. DATB and TATB are useful specialty explosives. TATB is also used for the preparation of benzenehexamine, a starting material for the synthesis of novel materials (optical imaging devices, liquid crystals, ferromagnetic compounds).

1,4-Diamino-2-butanone, a wide-spectrum microbicide, yields reactive species by metal-catalyzed oxidation.

Science.gov (United States)

Soares, Chrislaine O; Alves, Maria Julia M; Bechara, Etelvino J H

2011-06-15

The α-aminoketone 1,4-diamino-2-butanone (DAB), a putrescine analogue, is highly toxic to various microorganisms, including Trypanosoma cruzi. However, little is known about the molecular mechanisms underlying DAB's cytotoxic properties. We report here that DAB (pK(a) 7.5 and 9.5) undergoes aerobic oxidation in phosphate buffer, pH 7.4, at 37°C, catalyzed by Fe(II) and Cu(II) ions yielding NH(4)(+) ion, H(2)O(2), and 4-amino-2-oxobutanal (oxoDAB). OxoDAB, like methylglyoxal and other α-oxoaldehydes, is expected to cause protein aggregation and nucleobase lesions. Propagation of DAB oxidation by superoxide radical was confirmed by the inhibitory effect of added SOD (50 U ml-1) and stimulatory effect of xanthine/xanthine oxidase, a source of superoxide radical. EPR spin trapping studies with 5,5-dimethyl-1-pyrroline-1-oxide (DMPO) revealed an adduct attributable to DMPO-HO(•), and those with α-(4-pyridyl-1-oxide)-N-tert-butylnitrone or 3,5-dibromo-4-nitrosobenzenesulfonic acid, a six-line adduct assignable to a DAB(•) resonant enoyl radical adduct. Added horse spleen ferritin (HoSF) and bovine apo-transferrin underwent oxidative changes in tryptophan residues in the presence of 1.0-10 mM DAB. Iron release from HoSF was observed as well. Assays performed with fluorescein-encapsulated liposomes of cardiolipin and phosphatidylcholine (20:80) incubated with DAB resulted in extensive lipid peroxidation and consequent vesicle permeabilization. DAB (0-10 mM) administration to cultured LLC-MK2 epithelial cells caused a decline in cell viability, which was inhibited by preaddition of either catalase (4.5 μM) or aminoguanidine (25 mM). Our findings support the hypothesis that DAB toxicity to several pathogenic microorganisms previously described may involve not only reported inhibition of polyamine metabolism but also DAB pro-oxidant activity. Copyright © 2011 Elsevier Inc. All rights reserved.

Synthesis, characterization and photoinduced curing of polysulfones with (methacrylate functionalities

Directory of Open Access Journals (Sweden)

Cemil Dizman

2010-06-01

Full Text Available The UV-curable telechelic polysulfones with (methacrylate functionalities were synthesized by condensation polymerization and subsequent esterification. The final polymers and intermediates at various stages were characterized by 1H NMR, FT-ATR, and GPC. The oligomeric films prepared from the appropriate solutions containing these telechelics and 2,2-dimethoxy-2-phenylacetophenone (DMPA as the photoinitiator undergo rapid polymerization upon irradiation forming insoluble networks. The photo-curing behavior was investigated by photo-DSC and the effects of the molecular weight of the polysulfone precursor and type of functionality on the rate of polymerization and conversion were evaluated. Thermal properties of the photochemically cured films were studied by differential scanning calorimeter (DSC and thermal gravimetric analysis (TGA.

Free volume and relaxation dynamics of polymeric systems

International Nuclear Information System (INIS)

Bartos, J.; Kristiak, J.

1999-01-01

In this contribution use of positron annihilation spectroscopy (PALS) for the study of free volume and relaxation dynamics of some polymeric systems (1,4-polybutadiene, cis-1,4-polyisoprene, polyisobutylene, trans-1,4-polychloropropene, atactic polypropylene and 1,2-polybutadiene) is discussed

Equation of state and thermodynamic Grüneisen parameter of monoclinic 1,1-diamino-2,2-dinitroethylene.

Science.gov (United States)

Zhang, Jianzhong; Velisavljevic, Nenad; Zhu, Jinlong; Wang, Liping

2016-10-05

In situ synchrotron x-ray diffraction experiments were conducted on 1,1-diamino-2,2-dinitroethylene (FOX-7) at pressures up to 6.8 GPa and temperatures up to 485 K. Within the resolution of the present diffraction data, our results do not reveal evidence for a pressure-induced structural phase transition near 2 GPa, previously observed in several vibrational spectroscopy experiments. Based on unit-cell volume measurements, the least-squares fit using the third-order Birch-Murnaghan equation of state (EOS) yields K 0  =  12.6  ±  1.4 GPa and [Formula: see text]  =  11.3  ±  2.1 for the α-phase of FOX-7, which are in good agreement with recently reported values for the deuterated sample, indicating that the effect of hydrogen-deuterium substitution on the compressibility of FOX-7 is negligibly small. A thermal EOS is also obtained for the α-phase of FOX-7, including pressure dependence of thermal expansivity, (∂α/∂P)T  =  -7.0  ±  2.0  ×  10(-5) K(-1) GPa(-1), and temperature derivative of the bulk modulus, (∂K T/∂T)P  =  -1.1  ×  10(-2) GPa K(-1). From these EOS parameters, we calculate heat capacity at constant volume (C V) and thermodynamic Grüneisen parameter (γ TH) as a function of temperature. At ambient conditions, the calculated γ TH is 1.055, which is in good agreement with the value (1.09) previously obtained from density functional theory (DFT). The obtained C V, however, is 13% larger than that calculated from the first-principles calculations, indicating that the dispersion correction in the DFT calculations may need to be further improved for describing intermolecular interactions of molecular crystals.

Dispersive solid-phase microextraction and capillary electrophoresis separation of food colorants in beverages using diamino moiety functionalized silica nanoparticles as both extractant and pseudostationary phase.

Science.gov (United States)

Liu, Feng-Jie; Liu, Chuan-Ting; Li, Wei; Tang, An-Na

2015-01-01

In this work, a new method for the determination of food colorants in beverage samples is developed, using diamino moiety functionalized silica nanoparticles (dASNPs) as both adsorbents in dispersive solid-phase microextraction (dSPME) and pseudostationary phases (PSPs) in capillary electrophoresis (CE) separation. dASNPs were firstly used as adsorbents for the preconcentration of four colorants by the dSPME process. After that, colorants were efficiently separated by CE using 30 mM phosphate buffer (pH 6.0) containing 2 mM β-CD and 0.9 mg/mL dASNPs as additives. All factors influencing dSPME and CE separations were optimized in detail. The investigated analytes showed good linearities with correlation coefficients (R(2)) higher than 0.9932. The limits of detection for the four food colorants were between 0.030 and 0.36 mg/L, which are lower than those reported previously. The established method was also used to analyze four colorants in beverage samples with recoveries ranging from 82.7% to 114.6%. To the best of our knowledge, this is the first time to use NPs both as extractants in dSPME and pseudostationary phases in CE for the analytical purpose. Copyright © 2014 Elsevier B.V. All rights reserved.

Synthesis of thermoplastic poly(ester-olefin elastomers

Directory of Open Access Journals (Sweden)

Tanasijević Branka

2004-01-01

Full Text Available A series of thermoplastic poly(ester-olefin elastomers, based on poly(ethylene-stat-butylene, HO-PEB-OH, as the soft segment and poly (butylene terephthalate, PBT, as the hard segment, were synthesized by a catalyzed transesterification reaction in solution. The incorporation of soft hydrogenated poly(butadiene segments into the copolyester backbone was accomplished by the polycondensation of α, ω-dihydroxyl telechelic HO-PEB-OH, (PEB Mn = 3092 g/mol with 1,4-butanediol (BD and dimethyl terephthalate (DMT in the presence of a 50 wt-% high boiling solvent i.e., 1,2,4-trichlorobenzene. The molar ratio of the starting comonomers was selected to result in a constant hard to soft weight ratio of 60:40. The synthesis was optimized in terms of both the concentration of catalyst, tetra-n-butyl-titanate (Ti(OBu4, and stabilizer, N,N'-diphenyl-p-phenylenediamine (DPPD, as well as the reaction time. It was found that the optimal catalyst concentration (Ti(OBu4 for the synthesis of these thermoplastic elastomers was 1.0 mmol/mol ester and the optimal DPPD concentration was 1.0 wt-%. The extent of the reaction was followed by measuring the inherent viscosity of the reaction mixture. The effectiveness of the incorporation of the soft segments into the copolymer chains was proved by Soxhlet extraction with chloroform. The molecular structures, composition and the size of the synthesized poly(ester-butylenes were verified by 1H NMR spectroscopy, viscometry of dilute solutions and the complex dynamic melt viscosity. The thermal properties of poly(ester-olefins were investigated by differential scanning calorimetry (DSC. The degree of crystallinity was also determined by DSC. The thermal and thermo-oxidative stability were investigated by thermogravimetric analysis (TGA. The rheological properties of poly(ester-olefins were investigated by dynamic mechanical spectroscopy in the melt and solid state.

Syntheses, structures and properties of two new coordination polymers based on D-camphoric acid and 2-phenyl-4,6-diamino-1,3,5-triazine

Energy Technology Data Exchange (ETDEWEB)

Lun, Huijie; Yang, Jinghe; Jin, Linyu; Cui, Sasa; Bai, Yanlong [Henan Key Laboratory of Polyoxometalate, Institute of Molecular and Crystal Engineering, College of Chemistry and Chemical Engineering, Henan University, Kaifeng, Henan 475004 (China); Zhang, Xudong [State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002 (China); Li, Yamin, E-mail: liyamin@henu.edu.cn [Henan Key Laboratory of Polyoxometalate, Institute of Molecular and Crystal Engineering, College of Chemistry and Chemical Engineering, Henan University, Kaifeng, Henan 475004 (China)

2015-05-15

By hydrothermal method, two new coordination polymers [Co(ca)(phdat)]{sub n} (1), [Ni(ca)(phdat).0.125H{sub 2}O]{sub n} (2) (H{sub 2}ca=D-camphoric acid, phdat=2-phenyl-4,6-diamino-1,3,5-triazine) have been achieved and structurally characterized by IR, elemental analyses, X-ray single-crystal diffraction and TGA. The X-ray single-crystal diffraction reveals that compounds 1 and 2 are isostructural, both of which exhibit two-dimensional layered network built up from paddle-wheel Co{sub 2}(CO{sub 2}){sub 4}/Ni{sub 2}(CO{sub 2}){sub 4} SBUs by ca{sup 2−} ligand. In the existence of π…π stacking interactions between triazine rings and phenyl rings, the 3D networks are constructed with the hanging phdat filled between the neighboring layers. Furthermore, compounds 1–2 exhibit antiferromagnetic behavior and compound 2 displays a good activity for methanol oxidation. - Graphical abstract: Two new coordination compounds 1–2 have been synthesized and characterized by single-crystal X-ray diffractions, IR spectra, elemental analyses, thermogravimetric analyses, magnetic and electrochemical measurement. - Highlights: • This paper reports two new coordination polymers based on D-camphoric acid. • Both the compounds feather two-dimensional layered networks built up from paddle-wheel SBUs. • The magnetism and electrochemical property are investigated.

Spectroscopic (FT-IR, FT-Raman and UV-Visible) investigations, NMR chemical shielding anisotropy (CSA) parameters of 2,6-Diamino-4-chloropyrimidine for dye sensitized solar cells using density functional theory.

Science.gov (United States)

Gladis Anitha, E; Joseph Vedhagiri, S; Parimala, K

2015-02-05

The molecular structure, geometry optimization, vibrational frequencies of organic dye sensitizer 2,6-Diamino-4-chloropyrimidine (DACP) were studied based on Hartree-Fock (HF) and density functional theory (DFT) using B3LYP methods with 6-311++G(d,p) basis set. Ultraviolet-Visible (UV-Vis) spectrum was investigated by time dependent DFT (TD-DFT). Features of the electronic absorption spectrum in the UV-Visible regions were assigned based on TD-DFT calculation. The absorption bands are assigned to transitions. The interfacial electron transfer between semiconductor TiO2 electrode and dye sensitizer DACP is due to an electron injection process from excited dye to the semiconductor's conduction band. The observed and the calculated frequencies are found to be in good agreement. The energies of the frontier molecular orbitals (FMOS) have also been determined. The chemical shielding anisotropic (CSA) parameters are calculated from the NMR analysis, Stability of the molecule arising from hyperconjugative interactions and charge delocalization has been analyzed using natural bond orbital (NBO) analysis. Copyright © 2014 Elsevier B.V. All rights reserved.

Free volume and relaxation dynamics of polymeric systems

International Nuclear Information System (INIS)

Bartos, J.; Kristiak, J.

1999-01-01

Free volumes, holes, vacancies and defects in amorphous and crystalline polymers (1,4--poly-butadiene, cis-1,4-polyisoprene, poly-isobutylene, trans-1,4-polychloropropene, atactic polypropylene and 1,2-poly-butadiene) were studied by positronium annihilation spectroscopy (PALS) in temperature interval 15 to 300 K. Theoretical aspects of PALS are discussed

Highly sensitive room temperature organic vapor sensor based on polybenzoxazine-derived carbon aerogel thin film composite

International Nuclear Information System (INIS)

Thubsuang, Uthen; Sukanan, Darunee; Sahasithiwat, Somboon; Wongkasemjit, Sujitra; Chaisuwan, Thanyalak

2015-01-01

Graphical abstract: - Highlights: • Activated carbon aerogel with high surface area can be prepared from polybenzoxazine. • Activated carbon aerogel enhances the adsorption capacity of gas sensor. • Organic vapors with very low concentration can be detected by the as-prepared sensor. • The as-prepared sensor shows impressive short exposure and recovery time. • The response to different organic vapors can be tailored by changing polymer matrix. - Abstract: Gas sensing composites were fabricated using polybenzoxazine-based activated carbon aerogel as a conductive filler. The activated carbon aerogel is a nano-porous material, which has high pore volume of 0.57 cm 3 /g and surface area of 917 m 2 /g. The activated carbon aerogel/polybutadiene composite displayed good response of 11.2 and 6.7 to toluene and n-hexane, respectively, compared to those of graphite/polybutadiene composite. The activated carbon aerogel/polybutadiene composite also showed high sensitivity of 3.09 × 10 2 ppm −1 to toluene. However, the sensitivity of activated carbon aerogel/polybutadiene composite drastically decreased to 1.99 ppm −1 and zero when exposed to acetone and water, respectively. Contrarily, when polyvinyl alcohol was used as a matrix, the sensitivity was about 4.19 ppm −1 to water. While the composite was found to be not sensitive to toluene. The activated carbon aerogel/polybutadiene composite also showed good recovery as the electrical resistance came back to the original value within minutes when exposed to nitrogen gas

Self-assembly in solvates of 2,4-diamino-6-(4-methyl- phenyl)-1,3,5-triazine and in its molecular adducts with some aliphatic dicarboxylic acids

Science.gov (United States)

Nandy, Purnendu; Nayak, Amrita; Biswas, Sharmita Nandy; Pedireddi, V. R.

2016-03-01

Solid state structures of 2,4-diamino-6-(4-methylphenyl)-1,3,5-triazine, 1, in the form of methanol and dimethylsulfoxide (DMSO) solvates, as well as supramolecular assemblies of 1 with various aliphatic dicarboxylic acids, oxalic (a), malonic (b), succinic (c), glutaric (d) and adipic (e) have been reported. Analysis of the assemblies has been carried out by single crystal X-ray diffraction and thermal methods. Triazine 1 yields anhydrous molecular adducts with acids a-d, upon co-crystallization either from CH3OH and DMSO solvents. However acid e gives anhydrous adduct from DMSO solvent, while it gives a methanol adduct from CH3OH. Structure determination reveals that molecular adducts 1a, 1d and 1e are in a 2:1 ratio of 1 and the corresponding acid. However the ratio is 1:1, in 1b, perhaps due to the involvement of one of the acid groups in the intramolecular hydrogen bonding and in adduct 1c the ratio observed is 3:2. Structural features in all these assemblies have been rationalised in terms of various recognition patterns formed between the acceptor and donor groups. A noteworthy feature is that -COOH groups in acid a establish interaction with 1 through amino groups, while such interactions are observed to be through hetero -N atoms in case of the acids b-e.

3,5-Diamino-1,2,4-triazole@electrochemically reduced graphene oxide film modified electrode for the electrochemical determination of 4-nitrophenol

International Nuclear Information System (INIS)

Kumar, Deivasigamani Ranjith; Kesavan, Srinivasan; Baynosa, Marjorie Lara; Shim, Jae-Jin

2017-01-01

Highlights: •Triazole film was formed on electrochemically reduced graphene oxide. •pDAT@ERGO/GC was utilized for the electrochemical determination of 4-nitrophenol. •pDAT@ERGO/GC electrode offered wide concentration and nanomolar detection limit. •The fabricated electrode was employed in water sample analyses. -- Abstract: In this study, an eco-friendly benign method for the modification of electrochemically reduced graphene oxide (ERGO) on glassy carbon (GC) surface and electrochemical polymerized 3,5-diamino-1,2,4-triazole (DAT) film composite (pDAT@ERGO/GC) electrode was developed. The surface morphologies of the pDAT@ERGO/GC modified electrode were analyzed by field emission scanning electron microscopy (FESEM). FESEM images indicated that the ERGO supported pDAT has an almost homogeneous morphology structure with a size of 70 to 80 nm. It is due to the water oxidation reaction occurred while pDAT@ERGO/GC fabrication peak at +1.4 V leads to O 2 evolution and oxygen functional group functionalization on ERGO, which confirmed by X-ray photoelectron spectroscopy (XPS). In contrast, the bare GC modified with pDAT showed randomly arranged irregular bulky morphology structure compared to those of pDAT@ERGO/GC. Electrochemical reduction of graphene oxide was confirmed by Raman spectroscopy, XPS, and electrochemical impedance spectroscopy (EIS). The pDAT@ERGO/GC modified electrode was used for the electrochemical determination of 4-nitrophenol (4-NP). The 4-NP oxidation peak was observed at +0.25 V, and the differential pulse voltammetry demonstrated wide concentration range (5–1500 μM), high sensitivity (0.7113 μA μM −1 ), and low limit of detection (37 nM). Moreover, the pDAT@ERGO/GC electrode was applied to real water sample analysis by standard addition method, where in good recoveries (97.8% to 102.4%) were obtained.

Highly sensitive room temperature organic vapor sensor based on polybenzoxazine-derived carbon aerogel thin film composite

Energy Technology Data Exchange (ETDEWEB)

Thubsuang, Uthen [Materials Science and Engineering, School of Engineering and Resources, Walailak University, Nakhon Si Thammarat 80160 (Thailand); Sukanan, Darunee [The Petroleum and Petrochemical College and the Center of Excellence on Petrochemical and Materials Technology, Chulalongkorn University, Bangkok 10330 (Thailand); Sahasithiwat, Somboon [National Metal and Materials Technology Center, Thailand Science Park (TSP), Khlong Luang, Pathum Thani 12120 (Thailand); Wongkasemjit, Sujitra [The Petroleum and Petrochemical College and the Center of Excellence on Petrochemical and Materials Technology, Chulalongkorn University, Bangkok 10330 (Thailand); Chaisuwan, Thanyalak, E-mail: thanyalak.c@chula.ac.th [The Petroleum and Petrochemical College and the Center of Excellence on Petrochemical and Materials Technology, Chulalongkorn University, Bangkok 10330 (Thailand)

2015-10-15

Graphical abstract: - Highlights: • Activated carbon aerogel with high surface area can be prepared from polybenzoxazine. • Activated carbon aerogel enhances the adsorption capacity of gas sensor. • Organic vapors with very low concentration can be detected by the as-prepared sensor. • The as-prepared sensor shows impressive short exposure and recovery time. • The response to different organic vapors can be tailored by changing polymer matrix. - Abstract: Gas sensing composites were fabricated using polybenzoxazine-based activated carbon aerogel as a conductive filler. The activated carbon aerogel is a nano-porous material, which has high pore volume of 0.57 cm{sup 3}/g and surface area of 917 m{sup 2}/g. The activated carbon aerogel/polybutadiene composite displayed good response of 11.2 and 6.7 to toluene and n-hexane, respectively, compared to those of graphite/polybutadiene composite. The activated carbon aerogel/polybutadiene composite also showed high sensitivity of 3.09 × 10{sup 2} ppm{sup −1} to toluene. However, the sensitivity of activated carbon aerogel/polybutadiene composite drastically decreased to 1.99 ppm{sup −1} and zero when exposed to acetone and water, respectively. Contrarily, when polyvinyl alcohol was used as a matrix, the sensitivity was about 4.19 ppm{sup −1} to water. While the composite was found to be not sensitive to toluene. The activated carbon aerogel/polybutadiene composite also showed good recovery as the electrical resistance came back to the original value within minutes when exposed to nitrogen gas.

Synthesis, Characterization and Biocompatibility of Biodegradable Elastomeric Poly(ether-ester urethane)s Based on Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) and Poly(ethylene glycol) via Melting Polymerization

DEFF Research Database (Denmark)

Li, Zibiao; Yang, Xiaodi; Wu, Linping

2009-01-01

Poly(ether-ester urethane)s (PUs) multiblock co-polymers were synthesized from telechelic hydroxylated poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) and poly(ethylene glycol) (PEG) via a melting polymerization (MP) process using 1,6-hexamethylene diisocyanate (HDI) as a non-toxic couplin...

Reversible Mechanochemistry of a PdII Coordination Polymer

NARCIS (Netherlands)

Paulusse, Jos Marie Johannes; Sijbesma, Rint P.

2004-01-01

Breaking up and making up: The ultrasonic cleavage of high-molecular-weight linear coordination polymers of phosphane telechelic polytetrahydrofuran and palladium dichloride in dilute solution is a reversible process (see picture). Sonication for 1 h led to a decrease in the weight-averaged

Synthesis and Characterization of Multiphase Block Copolymers: Influence of Functional Groups on Macromolecular Architecture

OpenAIRE

Saito, Tomonori

2008-01-01

Low molecular weight liquid polybutadienes (1000 â 2000 g/mol) consisting of 60 mol% 1,2-polybutadiene repeating units were synthesized via anionic telomerization and conventional anionic polymerization. Maintaining the initiation and reaction temperature less than 70 °C minimized chain transfer and enabled the telomerization to occur in a living fashion, which resulted in well-controlled molecular weights and narrow polydispersity indices. MALDI-TOF mass spectrometry confirmed that the ...

Shape-Memory Effects in Biopolymer Networks with Collagen-Like Transient Nodes

NARCIS (Netherlands)

Skrzeszewska, P.J.; Jong, L.N.; Wolf, de F.A.; Stuart, M.A.C.; Gucht, van der J.

2011-01-01

In this article we study shape-memory behavior of hydrogels, formed by biodegradable and biocompatible recombinant telechelic polypeptides, with collagen-like end blocks and a random coil-like middle block. The programmed shape of these hydrogels was achieved by chemical cross-linking of lysine

Miktoarm core-crosslinked star copolymers with biologically active moieties on peripheries

DEFF Research Database (Denmark)

Javakhishvili, Irakli; Hvilsted, Søren

2010-01-01

) of epsilon-caprolactone (epsilon-CL) initiated by functional alcohols provides alkyne or azide end-capped linear PCL chains. Further derivatization of the hydroxyl chain ends of these hetero-telechelic macromolecules by methacrylic acid (MA), and subsequent Cu(I) mediated "click" coupling of terminal alkyne...

Free volume dilatation in polymers by ortho-positronium

DEFF Research Database (Denmark)

Winberg, P.; Eldrup, Morten Mostgaard; Maurer, F.H.J.

2012-01-01

The possibility of positronium induced free volume cavity expansion in some polymers above the glass transition temperature was investigated using experimental positron annihilation lifetime data from the literature for polydimethylsiloxane, polyisobutylene, and polybutadiene as function of tempe......The possibility of positronium induced free volume cavity expansion in some polymers above the glass transition temperature was investigated using experimental positron annihilation lifetime data from the literature for polydimethylsiloxane, polyisobutylene, and polybutadiene as function...

Polyolefin-Based Aerogels

Science.gov (United States)

Lee, Je Kyun; Gould, George

2012-01-01

An organic polybutadiene (PB) rubberbased aerogel insulation material was developed that will provide superior thermal insulation and inherent radiation protection, exhibiting the flexibility, resiliency, toughness, and durability typical of the parent polymer, yet with the low density and superior insulation properties associated with the aerogels. The rubbery behaviors of the PB rubber-based aerogels are able to overcome the weak and brittle nature of conventional inorganic and organic aerogel insulation materials. Additionally, with higher content of hydrogen in their structure, the PB rubber aerogels will also provide inherently better radiation protection than those of inorganic and carbon aerogels. Since PB rubber aerogels also exhibit good hydrophobicity due to their hydrocarbon molecular structure, they will provide better performance reliability and durability as well as simpler, more economic, and environmentally friendly production over the conventional silica or other inorganic-based aerogels, which require chemical treatment to make them hydrophobic. Inorganic aerogels such as silica aerogels demonstrate many unusual and useful properties. There are several strategies to overcoming the drawbacks associated with the weakness and brittleness of silica aerogels. Development of the flexible fiber-reinforced silica aerogel composite blanket has proven one promising approach, providing a conveniently fielded form factor that is relatively robust toward handling in industrial environments compared to silica aerogel monoliths. However, the flexible silica aerogel composites still have a brittle, dusty character that may be undesirable, or even intolerable, in certain applications. Although the cross-linked organic aerogels such as resorcinol-formaldehyde (RF), polyisocyanurate, and cellulose aerogels show very high impact strength, they are also very brittle with little elongation (i.e., less rubbery). Also, silica and carbon aerogels are less efficient

Synthesis of α-alkyl ω-trimethoxysilane polyoxazolines and their application as coatings on glass fibres

NARCIS (Netherlands)

Loontjens, Ton; Rique-Lurbet, Laurence

1999-01-01

A novel class of telechelic α-alkyl ω-trimethoxysilane poly(N-propionylethylene imine)s (TMS-PPEIs) has been synthesized by living cationic ring-opening polymerization of 2-oxazolines. A new route for the termination reaction of the living polyoxazoline is dcscribed. These block copolymers have been

Reversible switching of the sol- gel transition with ultrasound in rhodium(I) and iridium(I) coordination networks

NARCIS (Netherlands)

Paulusse, J.M.J.; Beek, van D.J.M.; Sijbesma, R.P.

2007-01-01

Reversible coordination networks were prepared by combining diphenylphosphinite telechelic polytetrahydrofuran (2) with [RhCl(COD)]2 or [IrCl(COD)]2 in chloroform. Both systems resulted in stable gels at concentrations above 50 and 30 g/L for the rhodium(I) and iridium(I) networks, respectively. The

Synthesis and thermal properties of hetero-bifunctional PLA oligomers and their stereocomplexes

NARCIS (Netherlands)

ten Breteler, M.R.; Feijen, Jan; Dijkstra, Pieter J.; Signori, F.; Signori, F.

2013-01-01

Abstract Hetero-telechelic, low-molecular-weight polylactides (PLAs) were prepared by the zinc-catalyzed ring-opening polymerization of l-lactide or d-lactide using functional initiators and subsequent reaction with termination reagents, yielding –OH, –COOH, –NH2 and –SH as functional chain ends.

3-Hydroxylysine, a potential marker for studying radical-induced protein oxidation

DEFF Research Database (Denmark)

Morin, B; Bubb, W A; Davies, Michael Jonathan

1998-01-01

albumin (BSA) and human low-density lipoprotein (LDL)] and diseased human tissues (atherosclerotic plaques and lens cataractous proteins). This work was aimed at investigating oxidized lysine as a sensitive marker for protein oxidation, as such residues are present on protein surfaces, and are therefore...... likely to be particularly susceptible to oxidation by radicals in bulk solution. HO* attack on lysine in the presence of oxygen, followed by NaBH4 reduction, is shown to give rise to (2S)-3-hydroxylysine [(2S)-2,6-diamino-3-hydroxyhexanoic acid], (2S)-4-hydroxylysine [(2S)-2,6-diamino-4-hydroxyhexanoic...... acid], (2S, 5R)-5-hydroxylysine [(2S,5R)-2,6-diamino-5-hydroxyhexanoic acid], and (2S,5S)-5-hydroxylysine [(2S,5S)-2,6-diamino-5-hydroxyhexanoic acid]. 5-Hydroxylysines are natural products formed by lysyl oxidase and are therefore not good markers of radical-mediated oxidation. The other...

Metal-free synthesis of novel biobased dihydroxyl-terminated aliphatic polyesters as building blocks for thermoplastic polyurethanes

NARCIS (Netherlands)

Tang, D.; Noordover, B.A.J.; Sablong, R.J.; Koning, C.E.

2011-01-01

Using the organic compound 1,5,7-triazabicyclo[ 4.4.0]dec-5-ene (TBD) as a catalyst for step-growth polymerization, a series of well-defined hydroxyl-telechelic renewable aliphatic polyesters (including poly(1,3-propylene adipate); poly(1,4-butylene adipate); poly(1,12-dodecylene sebacate); and

Synthesis And Characterization Of Telechelic Polytetrahydrofuran

OpenAIRE

Temelkaya, Ecem

2013-01-01

The target of this study was to obtain polymers having different functional end groups with the combination of living cationic ring-opening polymerization and click chemistry methods including Cu(I)-catalyzed azide-alkyne cyclo-addition (CuAAC) reactions. In this sense, polytetrahydrofurans (PTHF) having various functionalities such as azide (-N3), hydroxyl (-OH), bromo (-Br) and anthracene were obtained using functionalization from initiator, functionalization from terminating agent and chai...

Exceptionally strong, stiff and hard hybrid material based on an elastomer and isotropically shaped ceramic nanoparticles.

Science.gov (United States)

Georgopanos, Prokopios; Schneider, Gerold A; Dreyer, Axel; Handge, Ulrich A; Filiz, Volkan; Feld, Artur; Yilmaz, Ezgi D; Krekeler, Tobias; Ritter, Martin; Weller, Horst; Abetz, Volker

2017-08-04

In this work the fabrication of hard, stiff and strong nanocomposites based on polybutadiene and iron oxide nanoparticles is presented. The nanocomposites are fabricated via a general concept for mechanically superior nanocomposites not based on the brick and mortar structure, thus on globular nanoparticles with nanosized organic shells. For the fabrication of the composites oleic acid functionalized iron oxide nanoparticles are decorated via ligand exchange with an α,ω-polybutadiene dicarboxylic acid. The functionalized particles were processed at 145 °C. Since polybutadiene contains double bonds the nanocomposites obtained a crosslinked structure which was enhanced by the presence of oxygen or sulfur. It was found that the crosslinking and filler percolation yields high elastic moduli of approximately 12-20 GPa and hardness of 15-18 GPa, although the polymer volume fraction is up to 40%. We attribute our results to a catalytically enhanced crosslinking reaction of the polymer chains induced by oxygen or sulfur and to the microstructure of the nanocomposite.

Effect of fluoridated varnish and silver diamine fluoride solution on enamel demineralization: pH-cycling study Efeito do verniz fluoretado e da solução de diamino fluoreto de prata na desmineralização do esmalte: estudo utilizando modelo de ciclagem de pH

Directory of Open Access Journals (Sweden)

Alberto Carlos Botazzo Delbem

2006-04-01

Full Text Available OBJECTIVE: In the present investigation, the anticariogenic effect of fluoride released by two products commonly applied in infants was evaluated. METHODS: Bovine sound enamel blocks were randomly allocated to each one of the treatment groups: control (C, varnish (V and diamine silver fluoride solution (D. The blocks were submitted to pH cycles in an oven at 37ºC. Next, surface and cross-sectional microhardness were assessed to calculate the percentage loss of surface microhardness (%SML and the mineral loss (deltaZ. The fluoride present in enamel was also determined. RESULTS: F/Px10-3 (ANOVA, pOBJETIVOS: Este trabalho avaliou o efeito anticariogênico do flúor liberado por dois produtos comumente aplicados em crianças. MÉTODOS: Para isto, utilizaram-se blocos de esmalte de dentes bovinos distribuídos aleatoriamente em três grupos de tratamento: controle (C, verniz fluoretado (V e solução de diamino fluoreto de prata (D. Os blocos foram submetidos à ciclagem de pH a 37ºC. Após, realizou-se o teste de microdureza de superfície (para o cálculo da % da perda de microdureza de superfície - %SML e em secção longitudinal do esmalte (% de alteração da área mineral - %deltaZ e a determinação do flúor presente no esmalte (F/P x 10-3. RESULTADOS: As concentrações de flúor (ANOVA, p<0,05 na 1ª camada do esmalte, antes da ciclagem de pH, foram (C, V e D: 1,6ª; 21,6b e 4,0c. Os resultados de %SML (Kruskal-Wallis, p<0.05 foram: -64,0ª, -45,2b e -53,1c. Os valores de %deltaZ (ANOVA, p<0.05 foram: -18,7ª, -7,7b e -17,3ª. CONCLUSÃO: Os dados sugerem que o flúor liberado pelo verniz apresentou maior interação com o esmalte promovendo menor perda mineral quando comparado à solução de diamino de prata.

Researches on increasing compatibility between mixtures of PPS (poly-phenylene sulfide) and polyamide; Recherches en vue de la compatibilisation de melanges de polyamide et de polysulfure de phenylene

Energy Technology Data Exchange (ETDEWEB)

Montagne, O.

1997-01-08

This work aims to increase the compatibility between PPS (Poly Phenylene Sulfide) and a Polyamide. In order to do so, a bloc co-polymer was synthesised by the coupling of telechelic oligomers of PPS and PA oligomers. These telechelic oligomers of PPS were synthesised in a single step which a synthesis was made possible were the nitrile and secondary amide functions. These oligomers were characterised by various techniques which lead to a rather good precision (difficult to achieve for insolubility reasons). These oligomers were then coupled with the polyamide oligomers. In order to do so, a new reaction was discovered between an aromatic nitrile and a secondary aliphatic amide. It was assessed both on model molecules and on oligomers. An original mechanism is proposed. Once the characterisation of these copolymers was made, various blends of PPS and PA were studied. At last, the incorporation of the block copolymers in the blend obtained by a twin screw extruder, lead to an improvement of the compatibility between the two polymers and in an increase of the resistance to crack propagation. (author) 314 refs.

Cloud point extraction of copper, lead, cadmium, and iron using 2,6-diamino-4-phenyl-1,3,5-triazine and nonionic surfactant, and their flame atomic absorption spectrometric determination in water and canned food samples.

Science.gov (United States)

Citak, Demirhan; Tuzen, Mustafa

2012-01-01

A cloud point extraction procedure was optimized for the separation and preconcentration of lead(II), cadmium(II), copper(II), and iron(III) ions in various water and canned food samples. The metal ions formed complexes with 2,6-diamino-4-phenyl-1,3,5-triazine that were extracted by surfactant-rich phases in the nonionic surfactant Triton X-114. The surfactant-rich phase was diluted with 1 M HNO3 in methanol prior to its analysis by flame atomic absorption spectrometry. The parameters affecting the extraction efficiency of the proposed method, such as sample pH, complexing agent concentration, surfactant concentration, temperature, and incubation time, were optimized. LOD values based on three times the SD of the blank (3Sb) were 0.38, 0.48, 1.33, and 1.85 microg/L for cadmium(II), copper(II), lead(II), and iron(III) ions, respectively. The precision (RSD) of the method was in the 1.86-3.06% range (n=7). Validation of the procedure was carried out by analysis of National Institute of Standards and Technology Standard Reference Material (NIST-SRM) 1568a Rice Flour and GBW 07605 Tea. The method was applied to water and canned food samples for determination of metal ions.

A 2D nickel-based energetic MOFs incorporating 3,5-diamino-1,2,4-triazole and malonic acid: Synthesis, crystal structure and thermochemical study

International Nuclear Information System (INIS)

Yang, Qi; Song, Xiaxia; Ge, Jing; Zhao, Guowei; Zhang, Wendou; Xie, Gang; Chen, Sanping; Gao, Shengli

2016-01-01

Highlights: • An energetic MOFs with dinuclear nickel unit has been synthesized and characterized. • The Arrhenius equation, derived from kinetics analysis, is ln k = 55.89 − 332.01 × 10 3 /RT. • The standard molar enthalpy of formation of the compound is determined by a thermochemical cycle. • The molar heat capacity at T = 298.15 K is determined to be 1.42 ± 0.11 J · K −1 · g −1 . - Abstract: A new energetic MOFs, {[Ni 2 (C 2 H 5 N 5 ) 2 (C 3 H 2 O 4 ) 2 (H 2 O)]·3H 2 O} n (Hdatrz (C 2 H 5 N 5 ) = 3,5-diamino-1,2,4-triazole, H 2 mal (C 3 H 4 O 4 ) = malonic acid), has been synthesized and characterized by element analysis, chemical analysis, IR spectroscopy, single-crystal X-ray diffraction and thermal analysis. X-ray diffraction analysis confirmed that the compound featured a 2D layer structure with dinuclear Ni(II) unit. Thermal analysis demonstrated that the compound after dehydration have good thermostability with decomposition temperature up to 633 K. The non-isothermal kinetics for the compound was studied by Kissinger’s and Ozawa’s methods. The Arrhenius equation of initial thermal decomposition process of compound can be expressed as ln k = 55.89 − 332.01 × 10 3 /RT. Furthermore, a reasonable thermochemical cycle was designed based on the preparation reaction of the compound, and standard molar enthalpy of dissolution of reactants and products were measured by RD496-2000 calorimeter. Finally, the standard molar enthalpy of formation of the compound was determined to be −(2766.3 ± 2.3) kJ · mol −1 in accordance with Hess’s law. In addition, the specific heat capacity of the compound at T = 298.15 K was determined to be 1.42 ± 0.11 J · K −1 · g −1 by RD496-2000 calorimeter.

Computational Chemistry Toolkit for Energetic Materials Design

Science.gov (United States)

2006-11-01

industry are aggressively engaged in efforts to develop multiscale modeling and simulation methodologies to model and analyze complex phenomena across...energetic materials design. It is hoped that this toolkit will evolve into a collection of well-integrated multiscale modeling methodologies...Experimenta Theoreticala This Work 1-5-Diamino-4- methyl- tetrazolium nitrate 8.4 41.7 47.5 1-5-Diamino-4- methyl- tetrazolium azide 138.1 161.6

Modificação de fibra de carbono com PBLH e sua utilização em compósitos com resina epoxídica Hydroxyl-terminated polybutadiene-grafted carbon fiber in epoxy resin-based composites

Directory of Open Access Journals (Sweden)

Fábio L. Barcia

1999-06-01

Full Text Available Fibras de carbono contendo 1,4 e 2,1mmol/g de grupos carboxila e hidroxila fenólica, respectivamente, foram modificadas através de reação com TDI, resultando em fibras contendo 3,1 mmol/g de grupos isocianato. A introdução de grupos isocianato na superfície da fibra tornou possível a sua modificação com polibutadieno líquido hidroxilado. Fibras de carbono modificadas e não modificadas foram empregadas na preparação de compósitos com resina epoxídica, sendo observado um aumento considerável de resistência ao impacto em compósitos constituídos de fibras de carbono enxertadas com PBLH, devido, provavelmente, à natureza elastomérica da interface e à melhor adesão interfacial.Carbon fibers containing 1,4 e 2,1 mmol/g of carboxyl and phenolic hydroxyl groups, respectively, were modified through the reaction with TDI. The presence of isocyanate groups at the fiber surface made possible the fiber modification with hydroxyl terminated polybutadiene (HTPB. These modified and unmodified carbon fibers were employed in the preparation of epoxy resin-based composites. A substantial improvement in the impact properties was observed in the composites with HTPB-grafted carbon fibers when compared to unmodified carbon fibers. These results may be attributed to a higher interfacial adhesion promoted by reactions between the functional groups present at the modified carbon fiber surface and the epoxy matrix.

Effect of casting solvents on the properties of styrene-butadiene-styrene block copolymers studied by positron annihilation techniques

International Nuclear Information System (INIS)

Djermouni, B.; Ache, H.J.

1980-01-01

The positron annihilation technique was used to study the properties of styrene-butadiene-styrene block copolymers obtained by casting them in four different solvents: toluene, carbon tetrachloride, ethyl acetate, and methyl ethyl ketone. The positron annihilation rates plotted as a function of temperature show in all films irregularities at -70 and +85 0 C which were attributed to the onset of motions in the polybutadiene and polystyrene domaines, respectively. In addition to that, two irregularities were observed at -14 and +10 0 C if a poor solvent, such as ethyl acetate or methyl ethyl ketone, was used, while films cast in a good solvent such as toluene or carbon tetrachloride show only one additional irregularity on the lambda 2 -T curves at -14 0 C. The latter results were explained in terms of the interfacial model by assuming that these irregularities correspond to the glass transition of interlayer phases between the pure polystyrene and the pure polybutadiene phases. The one which shows the irregularity at -14 0 C could be the phase in which polybutadiene is the major component, while the transition at +10 0 C can be attributed to a phase in which polystyrene is the dominating factor

Puncture-Healing Thermoplastic Resin Carbon-Fiber-Reinforced Composites

Science.gov (United States)

Gordon, Keith L. (Inventor); Siochi, Emilie J. (Inventor); Grimsley, Brian W. (Inventor); Cano, Roberto J. (Inventor); Czabaj, Michael W. (Inventor)

2015-01-01

A composite comprising a combination of a self-healing polymer matrix and a carbon fiber reinforcement is described. In one embodiment, the matrix is a polybutadiene graft copolymer matrix, such as polybutadiene graft copolymer comprising poly(butadiene)-graft-poly(methyl acrylate-co-acrylonitrile). A method of fabricating the composite is also described, comprising the steps of manufacturing a pre-impregnated unidirectional carbon fiber preform by wetting a plurality of carbon fibers with a solution, the solution comprising a self-healing polymer and a solvent, and curing the preform. A method of repairing a structure made from the composite of the invention is described. A novel prepreg material used to manufacture the composite of the invention is described.

Morphology Formation in PC/ABS Blends during Thermal Processing and the Effect of the Viscosity Ratio of Blend Partners

Directory of Open Access Journals (Sweden)

Stefanie Bärwinkel

2016-08-01

Full Text Available Morphology formation during compounding, as well as injection molding of blends containing 60 wt % polycarbonate (PC and 40 wt % polybutadiene rubber-modified styrene-acrylonitrile copolymers (ABS, has been investigated by transmission electron microscopy (TEM. Profiles of the blend morphology have been recorded in injection-molded specimens and significant morphology gradients observed between their skin and core. A <10 µm thick surface layer with strongly dispersed and elongated nano-scale (streak-like styrene acrylonitrile (SAN phases and well-dispersed, isolated SAN-grafted polybutadiene rubber particles is followed by a 50–150 µm thick skin layer in which polymer morphology is characterized by lamellar SAN/ABS phases. Thickness of these lamellae increases with the distance from the specimen’s surface. In the core of the specimens the SAN-grafted polybutadiene rubber particles are exclusively present within the SAN phases, which exhibit a much coarser and less oriented, dispersed morphology compared to the skin. The effects of the viscosity of the SAN in the PC/ABS blends on phase morphologies and correlations with fracture mechanics in tensile and impact tests were investigated, including scanning electron microscopy (SEM assessment of the fracture surfaces. A model explaining the mechanisms of morphology formation during injection molding of PC/ABS blends is discussed.

Lyophilized kits of diamino dithiol compounds for labelling with 99m-technetium. Pharmacokinetics studies and distribution compartmental models of the related complexes

International Nuclear Information System (INIS)

Araujo, Elaine Bortoleti de

1995-01-01

The present work reflects the clinical interest for labelling diamino dithiol compounds with technetium-99m. Both chosen compounds, L,L-Ethylene dicysteine (L,L-EC) and L,L-Ethylene dicysteine diethyl esther (L,L-ECD) were obtained with relative good yield and characterized by IR and NMR. The study of labelling conditions with technetium-99m showed the influence of the type and mass of reducing agent as well as the pH on the formation of complexes with desired biological characteristics. Radiochemical purity was determined by thin layer chromatography (TLC) and high performance liquid chromatography (HPLC). Lyophilised kits of L,L-EC and L,L-ECD for labelling with 99m Tc were obtained, with stability superior to 120 days, when stored under refrigeration, enabling the kits marketing. The ideal formulation of the kits as well as the use of liquid nitrogen in the freezing process, determined the lyophilization success. Distribution biological studies of the 99m Tc complexes were performed on mice by invasive method and on bigger animals by scintigraphic evaluation. Biological distribution studies of the complex 99m Tc-L,L-EC showed fast blood clearance, with the elimination of about 90% of the administered dose after 60 minutes, almost exclusively by the urinary system. The biological distribution results were adjusted to a three compartmental distribution model, as expected for a radiopharmaceutical designed to renal dynamic studies, with tubular elimination. The complex interaction with renal tubular receptors is related with structural characteristics of the compound, more specifically with the presence and location of polar groups. In comparison with 99m Tc-L,L-EC, biological studies of the complex 99m Tc -L,L-ECD showed different distribution aspects, despite some structural similarities. The presence of ethyl groups confers to the complex neutrality and lipophilicity. It cross the intact blood brain barrier and is retained in the brain for enough period

Transformation of trinitrotoluene to triaminotoluene by mixed cultures incubated under methanogenic conditions

Energy Technology Data Exchange (ETDEWEB)

Hwang, P.; Chow, T.; Adrian, N.R.

2000-04-01

2,4,6-Trinitrotoluene (TNT) is an explosive widely used by the military. Although it is no longer manufactured in the US, large amounts of wastewater are generated annually from load, assembly, packing, and demilitarization operations. Granular-activated carbon adsorption is the standard technology for treating wastewater containing TNT and maintaining discharges within the limits established under the National Pollutant Discharge Elimination System. Studies evaluating biological treatment of pink water with an anaerobic fluidized-bed, granular-activated carbon bioreactor have been promising, but the fate of TNT is unknown. The authors investigated the anaerobic transformation of TNT by biofilm microorganisms obtained from a wastewater treatment plant receiving explosive manufacturing wastewater. The TNT was transformed to a mixture of 2-amino-4,6-dinitrotoluene; 4-amino-2,6-dinitrotoluene; 2,4-diamino-6-nitrotoluene; and 2,6-diamino-4-nitrotoluene before culminating in the formation of triaminotoluene (TAT). Triaminotoluene was susceptible to further degradation under anaerobic conditions, but its fate was not determined. Methane formation was inhibited but resumed after the depletion of the diaminonitrotoluene isomers. These studies demonstrate near stoichiometric formation of TAT from TNT and the transformation of 2-amino-4,6-dinitrotoluene to 2,4-diamino-6-nitrotoluene and 2,6-diamino-4-nitrotoluene by a mixed culture incubated under methanogenic conditions. This evidence indicates TAT is also a likely end-product of TNT biodegradation in the anaerobic fluidized fed bioreactor.

Study of the chemistry of coordination of ligands macrocyclics that contain groups thiophenolate like atoms donors of electrons

International Nuclear Information System (INIS)

Quiros Strunz, A. C.

1997-01-01

In this final Work of graduation was synthesizes a new denominated pentadentado N,N'-bis(2sulfidobencil)-3,3'-diamino-N'-disodio -metildipropilamina starting from the 3,3'-diamino-N-metildipropilamina two equivalent of 2-tiobencilbenzaldehido. The adducts that are formed starting from this tiing with metallic ions of transition divalents is complex of type LM. The complex LCo, LNi and LZn were synthesized, which show a geometry trigonal bypiramidal distorted, the complex with cobalt, however, was obtained with a conformation pseudotetraedrica. The complexes were characterized by means of methods magnetic and electrochemical spectroscopics [es

The Pyrimidine Nucleotide Reductase Step in Riboflavin and F420 Biosynthesis in Archaea Proceeds by the Eukaryotic Route to Riboflavin

OpenAIRE

Graupner, Marion; Xu, Huimin; White, Robert H.

2002-01-01

The Methanococcus jannaschii gene MJ0671 was cloned and overexpressed in Escherichia coli, and its gene product was tested for its ability to catalyze the pyridine nucleotide-dependent reduction of either 2,5-diamino-6-ribosylamino-4(3H)-pyrimidinone 5′-phosphate (compound 3) to 2,5-diamino-6-ribitylamino-4(3H)-pyrimidinone 5′-phosphate (compound 4) or 5-amino-6-ribosylamino-2,4(1H,3H)-pyrimidinedione 5′-phosphate (compound 7) to 5-amino-6-ribitylamino-2,4(1H,3H)-pyrimidinedione 5′-phosphate ...

Role of unsaturated derivatives of spermidine as substrates for spermine synthase and in supporting growth of SV-3T3 cells.

OpenAIRE

Pegg, A E; Nagarajan, S; Naficy, S; Ganem, B

1991-01-01

Synthetic unsaturated analogues of the natural polyamine were examined as possible substrates for spermine synthase and as replacements for spermidine in supporting the growth of SV-3T3 cells. It was found that N-(3-aminopropyl)-1,4-diamino-cis-but-2-ene [the cis isomer of the alkene analogue of spermidine] was a good substrate for spermine synthase, but that the trans isomer [N-(3-aminopropyl)-1,4-diamino-trans-but-2-ene] and the alkene analogue [N-(3-aminopropyl)-1,4-diaminobut-2-yne] were ...

Drug binding properties of neonatal albumin

DEFF Research Database (Denmark)

Brodersen, R; Honoré, B

1989-01-01

Neonatal and adult albumin was isolated by gel chromatography on Sephacryl S-300, from adult and umbilical cord serum, respectively. Binding of monoacetyl-diamino-diphenyl sulfone, warfarin, sulfamethizole, and diazepam was studied by means of equilibrium dialysis and the binding data were analyzed...... by the method of several acceptable fitted curves. It was found that the binding affinity to neonatal albumin is less than to adult albumin for monoacetyl-diamino-diphenyl sulfone and warfarin. Sulfamethizole binding to the neonatal protein is similarly reduced when more than one molecule of the drug is bound...

Photoelastic studies of some polybutadiene networks

Energy Technology Data Exchange (ETDEWEB)

Mark, J E; Llorente, M A [Cincinnati Univ., OH (USA). Dept. of Chemistry

1981-06-01

Two butadiene polymers were used in this investigation, one with 98.5% cis-1,4 units and the other with an approximately equibinary mixture of cis and trans units. Elastomeric networks prepared from these polymers were studied in elongation, in both the swollen and unswollen states over the temperature range -30 to 95/sup 0/C. There is evidence for crystallization in these networks, particularly as manifested by marked increases in birefringence at relatively low elongation and at temperatures as high as 40/sup 0/C. As expected, the birefringence and related quantities were found to be more sensitive to crystallization than the force, with the optical-configuration parameter and the stress-optical coefficient showing the greatest sensitivity. In the case of the cis-trans copolymer, the crystallization involves trans sequences, which are of relatively high melting point, and thus occurs at a temperature higher than for the lower melting cis sequences in the high-cis networks. The results which were free from the effects of network crystallization were used to calculate values of the temperature coefficient of the unperturbed dimensions of the chains, and values of the optical-configuration parameter. These configuration-dependent properties were found to be in satisfactory agreement with previously published theoretical results based on a rotational isomeric state model of these chain molecules.

CSP-based chemical kinetics mechanisms simplification strategy for non-premixed combustion: An application to hybrid rocket propulsion

KAUST Repository

Ciottoli, Pietro P.; Malpica Galassi, Riccardo; Lapenna, Pasquale E.; Leccese, G.; Bianchi, D.; Nasuti, F.; Creta, F.; Valorani, M.

2017-01-01

A set of simplified chemical kinetics mechanisms for hybrid rocket applications using gaseous oxygen (GOX) and hydroxyl-terminated polybutadiene (HTPB) is proposed. The starting point is a 561-species, 2538-reactions, detailed chemical kinetics

Copolymerization of 1-hexene and 1-dodecene with 1,3-butadiene by a versatate/diisobutylaluminum hydride/t-butyl chloride catalyst system

Directory of Open Access Journals (Sweden)

Gustavo Monteiro da Silva

2014-01-01

Full Text Available The aim of this study was to incorporate an alpha-olefin (1-hexene or 1-dodecene in a high cis polybutadiene chain, using a neodymium versatate/diisobutylaluminum hydride/t-butyl chloride catalyst system. The influence of alpha-olefin on polymerization reaction and polymer characteristics, using different weight ratios of butadiene/α-olefin, was evaluated. The copolymers were characterized by SEC, FTIR, NMR, TGA and viscosimetric analysis. The thermal stability of the polymer tended to increase with incorporation of alpha-olefins, while its microstructure was not affected. The weight average molecular mass (Mw tended to increase and the polymerization conversion tended to decrease with increasing alpha-olefins content. The copolymers showed a lower intrinsic viscosity than for the homopolymer. The results indicated that the alpha-olefins were incorporated in the polybutadiene chain.

Thixotropic gel-like composition and sterile blood-collecting and separating device

International Nuclear Information System (INIS)

Semersky, F.E.

1980-01-01

A thixotropic gel-like composition comprising liquid polybutadiene and an inorganic inert filler dispersed therein is adapted for use as a sealing barrier between separated phases of differing densities of a fluid in which said composition has at rest a density intermediate said differing densities, said gel-like composition being substantially resistant to sterilizing radiation. There is also disclosed a pre-packaged blood collecting and separating device which contains a mixture of liquid polybutadiene and an inorganic, inert filler, such as silica, as a thixotropic gel adapted at rest to form a sealing barrier between separated blood phases. The device and gel are subjected to sterilizing radiation to form a substantially sterile device, substantially free of backflow contamination without degradation of the physical properties of the gel. (author)

Grafting of acrylamide onto synthetic co polyamide by gamma irradiation

Energy Technology Data Exchange (ETDEWEB)

Hamoud, M R; Qamhieyh, E A [Chemistry Dept., College of Ibn Al-Haitham Baghdad university-Adhamiyah-Baghdad- (Iraq)

1995-10-01

Grafted copolymer was prepared by using gamma irradiation to graft acrylamide onto polymeric molecule prepared by interfacial condensation between two diamine molecules like 1,2 diamino propane and 1,6 diamino-hexane in aqueous layer with sebacoyl chloride in organic layer. The resulted co polyamide was grafted with acrylamide using gamma irradiation. The optimum conditions of grafting reaction were found, also various factors such as the effect of solvents, redox systems and the role water on the radiochemical grafting were studied. Many techniques were used in the characterization of the copolymer before and after grafting. 8 figs.,.

Synthesis by ATRP of poly(ethylene-co-butylene)-block-polystyrene, poly(ethylene-co-butylene)-block-poly(4-acetoxystyrene) and its hydrolysis product poly(ethylene-co-butylene)-block-poly(hydroxystyrene)

DEFF Research Database (Denmark)

Jankova, Katja; Kops, Jørgen; Chen, Xianyi

1999-01-01

Diblock copolymers of poly(ethylene-co-butylene) and polystyrene or poly(4-acetoxystyrene) are synthesized by atom transfer radical polymerization (ATRP) using a 2-bromopropionic ester macroinitiator prepared from commercial monohydroxyl functional narrow dispersity hydrogenated polybutadiene...

Poly(oxyethylene) electrolytes based on lithium pentafluorobenzene sulfonate

International Nuclear Information System (INIS)

Paillard, E.; Iojoiu, C.; Alloin, F.; Guindet, J.; Sanchez, J.-Y.

2007-01-01

Lithium pentafluorobenzene sulfonate was synthesized by a protocol whereby pollution by aromatic nucleophilic substitutions on the perfluorinated ring was avoided. Its poly(oxyethylene) complexes, although less conductive than lithium imide complexes, provided cationic transference numbers higher than 0.5. Surprisingly, even at fairly low concentrations, this salt markedly increased the mechanical properties of the polymer electrolyte. This effect was attributed to telechelic interactions of the ion pairs with distinct polyether chains and is in agreement with the high cationic transference numbers

Morphological analysis of ionomers

International Nuclear Information System (INIS)

1990-01-01

This report discusses the progress made during the period of April 1st, 1989 and March 31st, 1990. Topics covered are: SANS of Telechelic Ionomers, SANS of Sulfonated Polyurethanes, Effect of Matrix Polarity and Ambient Aging on the Morphology of Sulfonated Polyurethane Ionomers, Adhesive Sphere Model for Analysis of SAXS Data from Ionomers, Comparison of Structure-Property Relationships in Carboxylated and Sulfonated Polyurethane Ionomers, Development of a Liquid-like Hard Sphere Model for Deformed Ionomer Samples, and Polymer Synthesis for Proposed Research

Design of Biomedical and Biofunctional Polymers by Use of Living/Controlled Polymerizations and "Click" Chemistry

DEFF Research Database (Denmark)

Hvilsted, Søren

employed as a viable scaffold for design of several novel materials with intriguing, potentially therapeutic and biological properties. Living ROP strategies have afforded telechelic PCLs that can be equipped with various functional groups including “clickable” moieties or turned into macromonomers......, and effective synthetic strategy. Thirdly, the preparation of PCL-based miktoarm core-crosslinked amphiphilic star copolymers with hydrophobic interior, charged hydrophilic surface, and targeting motifs are elaborated.3 Such nanoscopic core-shell type architectures are envisioned to be excellent candidates...

Stress effects on the elastic properties of amorphous polymeric materials

Energy Technology Data Exchange (ETDEWEB)

Caponi, S., E-mail: silvia.caponi@cnr.it, E-mail: silvia.corezzi@unipg.it [Istituto Officina dei Materiali del CNR (CNR-IOM) - Unità di Perugia, c/o Dipartimento di Fisica e Geologia, Perugia I-06100 (Italy); Corezzi, S., E-mail: silvia.caponi@cnr.it, E-mail: silvia.corezzi@unipg.it [Dipartimento di Fisica e Geologia, Università di Perugia, Via A. Pascoli, I-06100 Perugia (Italy); CNR-ISC (Istituto dei Sistemi Complessi), c/o Università di Roma “LaSapienza,” Piazzale A. Moro 2, I-00185 Roma (Italy); Mattarelli, M. [NiPS Laboratory, Dipartimento di Fisica e Geologia, Università di Perugia, Via A. Pascoli, I-06100 Perugia (Italy); Fioretto, D. [Dipartimento di Fisica e Geologia, Università di Perugia, Via A. Pascoli, I-06100 Perugia (Italy)

2014-12-07

Brillouin light scattering measurements have been used to study the stress induced modification in the elastic properties of two glass forming polymers: polybutadiene and epoxy-amine resin, prototypes of linear and network polymers, respectively. Following the usual thermodynamic path to the glass transition, polybutadiene has been studied as a function of temperature from the liquid well into the glassy phase. In the epoxy resin, the experiments took advantage of the system ability to reach the glass both via the chemical vitrification route, i.e., by increasing the number of covalent bonds among the constituent molecules, as well as via the physical thermal route, i.e., by decreasing the temperature. Independently from the particular way chosen to reach the glassy phase, the measurements reveal the signature of long range tensile stresses development in the glass. The stress presence modifies both the value of the sound velocities and their mutual relationship, so as to break the generalized Cauchy-like relation. In particular, when long range stresses, by improvise sample cracking, are released, the frequency of longitudinal acoustic modes increases more than 10% in polybutadiene and ∼4% in the epoxy resin. The data analysis suggests the presence of at least two different mechanisms acting on different length scales which strongly affect the overall elastic behaviour of the systems: (i) the development of tensile stress acting as a negative pressure and (ii) the development of anisotropy which increases its importance deeper and deeper in the glassy state.

Dispersões aquosas poliuretânicas à base de polibutadieno hidroxilado: influência das variáveis reacionais Development of polyurethane aqueous dispersions based on hydroxy-terminated polybutadiene: reaction variables

Directory of Open Access Journals (Sweden)

Lúcio C. de Magalhães

2007-09-01

Full Text Available Neste trabalho foram produzidas dispersões aquosas poliuretânicas com formulações variadas, em ausência de solvente orgânico. Nas sínteses, foram empregados o diisocianato de isoforona (IPDI e como polióis, o poli(glicol propilênico (PPG e diferentes tipos de polibutadieno líquido hidroxilado (HTPB comerciais. Para promover a dispersão das cadeias poliméricas em água, foi utilizado o ácido dimetilolpropiônico (DMPA, que após neutralização com trietilamina (TEA forneceu os sítios iônicos responsáveis pela estabilidade das partículas dispersas no meio aquoso. Como extensor de cadeia foi utilizada a hidrazina (HYD. As dispersões aquosas poliuretânicas obtidas foram avaliadas quanto ao teor de sólidos totais, tamanho médio de partícula e viscosidade aparente. Não foram observadas variações significativas nesses valores, que ficaram em faixas pequenas, independentemente da formulação. Os filmes formados a partir dessas dispersões foram avaliados quanto às suas características visuais, adesão e propriedades mecânicas. Os filmes apresentaram boa aderência a superfícies de alumínio, transparência e flexibilidade e aqueles produzidos com baixos teores de DMPA e/ou baixa razão NCO/OH apresentaram melhores propriedades mecânicas.In this work, polyurethane aqueous dispersions with different formulations were produced in the absence of organic solvents. In the synthesis, isophorone diisocyanate (IPDI, poly(propylene glycol (PPG and different types of hydroxy-terminated polybutadiene (HTPB were employed. In order to make possible the dispersion of the polyurethane chains in water, dimethylolpropionic acid (DMPA, was used. Afterwards the acid groups were neutralized with triethylamine (TEA to provide the ionic groups responsible for the particles stability in water. The solids content, viscosity and particle size of the formulations produced in this work were evaluated. These parameters were found to vary within a

Studies on Synthesis of Some Novel Heterocyclic Azlactone Derivatives and Imidazolinone Derivatives and their Antimicrobial Activity

Directory of Open Access Journals (Sweden)

Rakesh N. Mistry

2005-01-01

Full Text Available p - Methyl benzoic acid on reaction with phosphorus pentachloride gives p - methyl benzoyl chloride derivative which on condensation with glycine gives p - methyl benzoyl glycine derivative. Now, this p - methyl benzoyl glycine derivative on condensation with various substituted aldehydes gives corresponding substituted 4 - [aryl methylidine] - 2 - [p - methyl phenyl] - oxazole - 5 - one derivatives [1(a-j]. Further, these derivatives [1(a-j] on condensation with 4 , 4’ - diamino diphenyl sulphone gives corresponding substituted imidazolinone - dibenzsulphone derivatives [2(a-j], on condensation with 4 , 4’ - diamino diphenyl methane gives corresponding substituted imidazolinone - dibenzmethane derivatives [3(a-j], on condensation with 4,4’- diamino benzanilide gives corresponding substituted imidazolinone - benzanilide derivatives [4(a-j] and on condensation with 2 - amino pyridine gives corresponding substituted imidazolinone - pyridine derivatives [5(a-j] respectively. Structure elucidation of synthesised compounds has been made on the basis of elemental analysis, I.R. spectral studies and 1H N.M.R. spectral studies. The antimicrobial activity of the synthesised compounds has been studied against the cultures “Staphylococcus aureus”, “Escherichia coli” and “Candela albicans”.

Site-Selective Ribosylation of Fluorescent Nucleobase Analogs Using Purine-Nucleoside Phosphorylase as a Catalyst: Effects of Point Mutations

Directory of Open Access Journals (Sweden)

Alicja Stachelska-Wierzchowska

2015-12-01

Full Text Available Enzymatic ribosylation of fluorescent 8-azapurine derivatives, like 8-azaguanine and 2,6-diamino-8-azapurine, with purine-nucleoside phosphorylase (PNP as a catalyst, leads to N9, N8, and N7-ribosides. The final proportion of the products may be modulated by point mutations in the enzyme active site. As an example, ribosylation of the latter substrate by wild-type calf PNP gives N7- and N8-ribosides, while the N243D mutant directs the ribosyl substitution at N9- and N7-positions. The same mutant allows synthesis of the fluorescent N7-β-d-ribosyl-8-azaguanine. The mutated form of the E. coli PNP, D204N, can be utilized to obtain non-typical ribosides of 8-azaadenine and 2,6-diamino-8-azapurine as well. The N7- and N8-ribosides of the 8-azapurines can be analytically useful, as illustrated by N7-β-d-ribosyl-2,6-diamino-8-azapurine, which is a good fluorogenic substrate for mammalian forms of PNP, including human blood PNP, while the N8-riboside is selective to the E. coli enzyme.

76 FR 22565 - National Emission Standards for Hazardous Air Pollutant Emissions: Group I Polymers and Resins...

Science.gov (United States)

2011-04-21

... Production, Nitrile Butadiene Rubber (NBR) Production, Polybutadiene Rubber Production, Polysulfide Rubber..., Epichlorohydrin Elastomers, Neoprene Rubber, and NBR source categories will not require additional control to meet... Emissions Standards for Group I Polymers and Resins (Butyl Rubber Production, Epichlorohydrin Elastomers...

Influence of gamma radiation on the crosslinking properties of oligo-butadiene-base polyurethane elastomers

International Nuclear Information System (INIS)

Dedgaonkar, V.G.

1994-01-01

Liquid oligo-butadiene-base diol was cured by gammas when a diisocyanate and a triol were present. The NCO/OH ratio was at unity. Radiation brought about crosslink networks through urethane linkages and among polybutadiene segments. (author). 5 refs., 1 tab

Gyroid nanoporous scaffold for conductive polymers

DEFF Research Database (Denmark)

Guo, Fengxiao; Schulte, Lars; Zhang, Weimin

2011-01-01

Conductive nanoporous polymers with interconnected large surface area have been prepared by depositing polypyrrole onto nanocavity walls of nanoporous 1,2-polybutadiene films with gyroid morphology. Vapor phase polymerization of pyrrole was used to generate ultrathin films and prevent pore blocking...

Impact behaviour of polystyene/EPDM-rubber blends : influence of electron beam irradiation

NARCIS (Netherlands)

Gisbergen, van J.G.M.; Borgmans, C.P.J.H.; Sanden, van der M.C.M.; Lemstra, P.J.

1990-01-01

Electron beam irradiation of polystyrene/ethylene propylene diene monomer (PS/EPDM) blends, using polystyrene/polybutadiene block copolymers as compatibilizers, resulted in a two to three fold increase in Izod impact value. This greatly increased impact resistance is probably related to

Barrier and adhesion properties of anti-corrosion coatings based on surfactant-free latexes from anhydride-containing polymers

NARCIS (Netherlands)

Soer, W.J.; Ming, W.; Koning, C.E.; Benthem, van R.A.T.M.; Mol, J.M.C.; Terryn, H.

2009-01-01

We have successfully obtained surfactant-free latexes from anhydride-containing polymers, including poly(styrene-alt-maleic anhydride) (PSMA), maleinized polybutadiene (PBDMA), and poly(octadecene-alt-maleic anhydride) (POMA). Here we report barrier and adhesion properties of the coatings made from

pH Responsiveness of hydrogels formed by telechelic polyampholytes

Czech Academy of Sciences Publication Activity Database

Dyakonova, M. A.; Gotzamanis, G.; Niebuur, B.-J.; Vishnevetskaya, N. S.; Raftopoulos, K. N.; Di, Z.; Filippov, Sergey K.; Tsitsilianis, C.; Papadakis, C. M.

2017-01-01

Roč. 13, č. 19 (2017), s. 3568-3579 ISSN 1744-683X R&D Projects: GA ČR(CZ) GC15-10527J Institutional support: RVO:61389013 Keywords : polyampholyte * self-assembly * block copolymers Subject RIV: CF - Physical ; Theoretical Chemistry OBOR OECD: Physical chemistry Impact factor: 3.889, year: 2016

Investigation of the Failure Mechanism of HTPB/AP/Al Propellant by In-situ Uniaxial Tensile Experimentation in SEM

NARCIS (Netherlands)

Ramshorst, M.C.J. van; Benedetto, G.L. di; Duvalois, W.; Hooijmeijer, P.A.; Heijden, A.E.D.M. van der

2016-01-01

The failure mechanism of a propellant consisting of hydroxyl terminated poly-butadiene filled with ammonium perchlorate and aluminum (HTPB/AP/Al) was determined by performing in-situ uniaxial tensile tests in a scanning electron microscope (SEM). The experimental test plan contained uniaxial tensile

Role of catalysis in sustainable production of synthetic elastomers

Indian Academy of Sciences (India)

productions, the impact of synthetic elastomer business cannot be overlooked. The need of ... Keywords. Elastomers; catalysis; tyres and automobiles; mechanism; manufacturing process. 1. ..... level fractional factorial design model was also developed to ..... Polybutadiene can be manufactured by a number of pro- cesses ...

Synthesis, characterization and self-assembly of well-defined linear heptablock quaterpolymers

KAUST Repository

Ntaras, Christos; Polymeropoulos, George; Zapsas, George; Ntetsikas, Konstantinos; Liontos, George; Karanastasis, Apostolos; Moschovas, Dimitrios; Rangou, Sofia; Stewart-Sloan, Charlotte; Hadjichristidis, Nikolaos; Thomas, Edwin L.; Avgeropoulos, Apostolos

2016-01-01

Two well-defined heptablock quaterpolymers of the ABCDCBA type [Α: polystyrene (PS), B: poly(butadiene) with ∼90% 1,4-microstructure (PB1,4), C: poly(isoprene) with ∼55% 3,4-microstructure (PI3,4) and D: poly(dimethylsiloxane) (PDMS)] were

Effect of the Molecular Weight of AB Diblock Copolymers on the Lamellar Orientation in Thin Films

DEFF Research Database (Denmark)

Potemkin, Igor I.; Busch, Peter; Smilgies, Detlef-M

2007-01-01

We propose a theoretical explanation of the parallel and perpendicular lamellar orientations in free surface films of symmetric polystyrene-block-polybutadiene diblock copolymers on silicon substrates (with a native SiOx layer). Two approaches are developed: A correction to the strong segregation...

Complex Macrophase-Separated Nanostructure Induced by Microphase Separation in Binary Blends of Lamellar Diblock Copolymer Thin Films

DEFF Research Database (Denmark)

Zhang, Jianqi; Posselt, Dorthe; Smilgies, Detlef-M.

2014-01-01

The nanostructures of thin films spin-coated from binary blends of compositionally symmetric polystyrene-b-polybutadiene (PS-b-PB) diblock copolymer having different molar masses are investigated by means of atomic force microscopy (AFM) and grazing-incidence small-angle X-ray scattering (GISAXS)...

Investigation of the interfacial bonding in composite propellants. 1,3,5-Trisubstituted isocyanurates as universal bonding agents

Directory of Open Access Journals (Sweden)

GORDANA S. USCUMLIC

2006-05-01

Full Text Available A series of 1,3,5-trisubstituted isocyanurates (substituents: CH2CH2OH, CH2CH=CH2 and CH2CH2COOH was synthesized according to a modified literature procedure. Experimental investigations included modification of the synthetic procedure in terms of the starting materials, solvents, temperature, isolation techniques, as well as purification and identification of the products. All the synthesized isocyanurates were identified by their melting point and FTIR, 1H NMR and UV spectroscopic data. Fourier transform infrared spectrophotometry was also used to study the interaction between ammonium perchlorate, hydroxyl terminated poly(butadiene, carboxyl terminated poly(butadiene, poly(butadiene-co-acrylonitrile, poly(propylene ether, cyclotrimethylenetrinitramine and the compounds synthesized in this work, which can serve as bonding agents. The results show that tris(2-hydroxyethylisocyanurate is a universal bonding agent for the ammonium perchlorate/carboxyl terminated poly(butadiene/cyclotrimethylenetrinitramine composite propellant system.

A Solution Study of Complex Formation of Some Diamines with Lanthanones

Directory of Open Access Journals (Sweden)

J. J. Vora

2009-01-01

Full Text Available To study the metal ligand equilibrium in aqueous solution, the well known Irving-Rossotti titration method was used. The temperature selected is 30±0.10C at ionic strength 0.2 M (NaClO4 which was maintained constant through out the work. The binary metal complex (ML2 formation was studied. The metals selected are Sm3+, Gd3+, Dy3+ and Yb3+. The diamine ligands taken are ethylenediamine, 1,2 diamino propane, 1,3 diamino propane, N-N diethyl ethylenediamine and N-N -dimethyl ethylenediamine. Factors that affected the stability of the complexes are size and ionic potential of lanthanone ions, basicity of ligands, ring size and steric effect of ligands.

Synthesis and characterization of new copoly(amide-imides based on N,N’-(4,4’-diphenylsulfonebistrimellitimide with different diacids and diamines

Directory of Open Access Journals (Sweden)

Khalil Faghihi

2010-08-01

Full Text Available In this paper six new copoly(amide-imides (7a-f were synthesized through the direct polycondensation reaction of N,N'-(4,4'-diphenylsulfonebistrimellitimide (1 with 4,4'-diamino diphenylsulfone (2, 4,4'-diamino diphenylether (3, in the presence of adipic acid (4, fumaric acid (5 or terephthalic acid (6 as the second diacid in a medium consisting of N-methyl-2-pyrrolidone, triphenyl phosphite, calcium chloride and pyridine. The resulted polymers were fully characterized by means of FTIR spectroscopy, elemental analyses, inherent viscosity, solubility tests and UV-vis spectroscopy. Thermal stabilities of resulted polymers (7a-c containing three different second diacids were compared by using TGA and DTG thermograms.

Thiolated poly(ɛ-caprolactone) macroligand with vacant coordination sites on gold substrate: Synthesis and surface characterization

Science.gov (United States)

Farah, Abdiaziz A.; Zheng, Susan H.; Morin, Sylvie; Bensebaa, Farid; Pietro, William J.

2007-04-01

Surface-confined telechelic poly(ɛ-caprolactone) macroligand with two distinct functional groups per polymeric chain has been synthesized and characterized. The molecular microstructure of the macroligand with regard to the properties of the end-capped functionalities and with those on surface substrate has been studied by solution and surface analytical methods (i.e., X-ray photoelectron spectroscopy (XPS), grazing angle reflectance-Fourier transform IR spectroscopy (GA-FTIR), water contact angle measurements, and atomic force microscopy (AFM)) to elucidate the structure and properties of such multifunctional polymer on gold (1 1 1) substrate.

Thermoplastic polybutadiene-based polyurethane/carbon nanofiber composites

Czech Academy of Sciences Publication Activity Database

Špírková, Milena; Duszová, A.; Poreba, Rafal; Kredatusová, Jana; Bureš, R.; Fáberová, M.; Šlouf, Miroslav

2014-01-01

Roč. 67, December (2014), s. 434-440 ISSN 1359-8368 R&D Projects: GA ČR(CZ) GA13-06700S Institutional support: RVO:61389013 Keywords : carbon fibre * polymer–matrix composites (PMCs) * mechanical properties Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.983, year: 2014

New polymer systems: Chain extension by dianhydrides

Science.gov (United States)

Rhein, R. A.; Ingham, J. D.

1974-01-01

Three anhydrides provide effective chain extension of hydroxy-terminated polyalkylene oxides and polybutadienes. Novel feature of these anhydride reactants is that they are difunctional as anhydrides, but they are tetrafunctional if conditions are selected that lead to total esterification or reaction of all carboxyl groups.

Thermal decomposition of phase-stabilised ammonium nitrate (PSAM), HTPB based propellants. The effect of iron(III)oxide burning-rate catalyst

NARCIS (Netherlands)

Carvalheira, P.; Gadiot, G.M.H.J.L.; Klerk, W.P.C. de

1995-01-01

Phase-stabilised ammonium nitrate (PSAN) and hydroxyl-terminated polybutadiene (HTPB) are the main ingredients of propellants used with success in some pyrotechnic igniter components of the VULCAIN liquid rocket engine for the ARIANE 5. Small amounts of selected additives play an important role in

Physisorption of SDS in a Hydrocarbon Nanoporous Polymer

DEFF Research Database (Denmark)

Li, Li; Wang, Yanwei; Vigild, Martin Etchells

2010-01-01

Surface modification of nanoporous 1,2-polybutadiene of pore diameter similar to 15 nm was accomplished by physisorption of sodium dodecyl sulfate (SDS) in water. Loading of the aqueous solution and the accompanying physisorption of SDS into the hydrophobic nanoporous films were investigated in a...

Radiation chemistry of amino acids, peptides and proteins in relation to the radiation sterilization of high-protein foods

International Nuclear Information System (INIS)

Garrison, W.M.

1981-12-01

An important source of information on the question of whether or not toxic or other deleterious substances are formed in the radiation sterilization of foods is the chemical study of reaction products and reaction mechanisms in the radiolysis of individual food components. The present evaluation of the radiation chemistry of amino acids, peptides, and proteins outlines the various radiation-induced processes which lead to amino acid degradation and to the synthesis of amino acid derivatives of higher molecular weight. Among the latter are the α,α'-diamino dicarboxylic acids which are formed as major products in the radiolysis of peptides both in aqueous solution and in the solid state. The α,α'-diamino acids are of particular interest as irradiation products because they represent a class of compounds not normally encountered in plant and animal protein sources. Such compounds have, however, been isolated from certain types of bacteria and bacterial products. All of the available data strongly suggest that the α,α'-diamino acids are produced in significant yield in the radiation sterilization of high protein foods. The importance of initiating extensive chemical and biological studies of these and of other high molecular weight products in irradiated food is emphasized

Radiation chemistry of amino acids, peptides and proteins in relation to the radiation sterilization of high-protein foods

International Nuclear Information System (INIS)

Garrison, W.M.

1979-03-01

An important source of information on the question of whether or not toxic or other deleterious substances are formed in the radiation sterilization of foods is the chemical study of reaction products and reaction mechanisms in the radiolysis of individual food components. The present evaluation of the radiation chemistry of amino acids, peptides and proteins outlines the various radiation-induced processes which lead to amino acid degradation and to the synthesis of amino acid derivatives of higher molecular weight. Among the latter are the α,α'-diamino dicarboxylic acids which are formed as major products in the radiolysis of peptides both in aqueous solution and in the solid state. The α,α'-diamino acids are of particular interest as irradiation products because they represent a class of compounds not normally encountered in plant and animal protein sources. Such compounds have, however, been isolated from certain types of bacteria and pathogenic toxins. All of the available data strongly suggest that the α,α'-diamino acids are produced in significant yield in the radiation sterilization of high protein foods. The importance of initiating extensive chemical and biological studies of initiating extensive chemical and biological studies of these and of other high molecular weight products in irradiated food is emphasized

Radiation chemistry of amino acids, peptides and proteins in relation to the radiation sterilization of high-protein foods

Energy Technology Data Exchange (ETDEWEB)

Garrison, W. M.

1981-12-01

An important source of information on the question of whether or not toxic or other deleterious substances are formed in the radiation sterilization of foods is the chemical study of reaction products and reaction mechanisms in the radiolysis of individual food components. The present evaluation of the radiation chemistry of amino acids, peptides, and proteins outlines the various radiation-induced processes which lead to amino acid degradation and to the synthesis of amino acid derivatives of higher molecular weight. Among the latter are the ..cap alpha..,..cap alpha..'-diamino dicarboxylic acids which are formed as major products in the radiolysis of peptides both in aqueous solution and in the solid state. The ..cap alpha..,..cap alpha..'-diamino acids are of particular interest as irradiation products because they represent a class of compounds not normally encountered in plant and animal protein sources. Such compounds have, however, been isolated from certain types of bacteria and bacterial products. All of the available data strongly suggest that the ..cap alpha..,..cap alpha..'-diamino acids are produced in significant yield in the radiation sterilization of high protein foods. The importance of initiating extensive chemical and biological studies of these and of other high molecular weight products in irradiated food is emphasized.

Syntheses and Thermal Behaviors of Rb(FOX-7)·H2O and Cs(FOX-7)·H2O

International Nuclear Information System (INIS)

Luo, Jinan; Xu, Kangzhen; Wang, Min; Ren, Xiaolei; Chen, Yongshun; Song, Jirong; Zhao, Fengqi

2010-01-01

Two new energetic organic alkali metal salts, 1,1-diamino-2,2-dinitroethylene rubidium salt [Rb(FOX-7)·H 2 O] and 1,1- diamino-2,2-dinitroethylene cesium salt [Cs(FOX-7)·H 2 O], were synthesized by reacting of 1,1-diamino-2,2-dinitroethylene (FOX-7) and rubidium chloride or cesium chloride in alkali methanol aqueous solution, respectively. The thermal behaviors of Rb(FOX-7)·H 2 O and Cs(FOX-7)·H 2 O were studied with DSC and TG methods. The critical temperatures of thermal explosion of the two compounds are 216.22 and 223.73 .deg. C, respectively. Specific heat capacities of the two compounds were determined with a micro-DSC method, and the molar heat capacities are 217.46 and 199.47 J mol -1 K -1 at 298.15 K, respectively. The adiabatic times-to-explosion were also calculated to be a certain value of 5.81 - 6.36 s for Rb(FOX-7)·H 2 O, and 9.92 - 10.54 s for Cs(FOX-7)·H 2 O. After FOX-7 becoming alkali metal salts, thermal decomposition temperatures of the compounds heighten with the rise of element period, but thermal decomposition processes become intense

Confined flow of polymer blends

NARCIS (Netherlands)

Tufano, C.; Peters, G.W.M.; Meijer, H.E.H.

2008-01-01

The influence of confinement on the steady-state morphology of two different emulsions is investigated. The blends, made from polybutene (PB) in polydimethylsiloxane (PDMS) and polybutadiene (PBD) in PDMS, are sheared between two parallel plates, mostly with a standard gap spacing of 40 m, in the

Tushar Jana

Indian Academy of Sciences (India)

Home; Journals; Bulletin of Materials Science. Tushar Jana. Articles written in Bulletin of Materials Science. Volume 32 Issue 5 October 2009 pp 507-514 Polymers. Functionalization of hydroxyl terminated polybutadiene with biologically active fluorescent molecule · R Murali Sankar Subhadeep Saha K Seeni Meera Tushar ...

Rocket Solid Propellant Alternative Based on Ammonium Dinitramide

Directory of Open Access Journals (Sweden)

Grigore CICAN

2017-03-01

Full Text Available Due to the continuous run for a green environment the current article proposes a new type of solid propellant based on the fairly new synthesized oxidizer, ammonium dinitramide (ADN. Apart of having a higher specific impulse than the worldwide renowned oxidizer, ammonium perchlorate, ADN has the advantage, of leaving behind only nitrogen, oxygen and water after decomposing at high temperatures and therefore totally avoiding the formation of hydrogen chloride fumes. Based on the oxidizer to fuel ratios of the current formulations of the major rocket solid booster (e.g. Space Shuttle’s SRB, Ariane 5’s SRB which comprises mass variations of ammonium perchlorate oxidizer (70-75%, atomized aluminum powder (10-18% and polybutadiene binder (12-20% a new solid propellant was formulated. As previously stated, the new propellant formula and its variations use ADN as oxidizer and erythritol tetranitrate as fuel, keeping the same polybutadiene as binder.

Unlocking Chain Exchange in Highly Amphiphilic Block Polymer Micellar Systems: Influence of Agitation.

Science.gov (United States)

Murphy, Ryan P; Kelley, Elizabeth G; Rogers, Simon A; Sullivan, Millicent O; Epps, Thomas H

2014-11-18

Chain exchange between block polymer micelles in highly selective solvents, such as water, is well-known to be arrested under quiescent conditions, yet this work demonstrates that simple agitation methods can induce rapid chain exchange in these solvents. Aqueous solutions containing either pure poly(butadiene- b -ethylene oxide) or pure poly(butadiene- b -ethylene oxide- d 4 ) micelles were combined and then subjected to agitation by vortex mixing, concentric cylinder Couette flow, or nitrogen gas sparging. Subsequently, the extent of chain exchange between micelles was quantified using small angle neutron scattering. Rapid vortex mixing induced chain exchange within minutes, as evidenced by a monotonic decrease in scattered intensity, whereas Couette flow and sparging did not lead to measurable chain exchange over the examined time scale of hours. The linear kinetics with respect to agitation time suggested a surface-limited exchange process at the air-water interface. These findings demonstrate the strong influence of processing conditions on block polymer solution assemblies.

Oriented Structure of Pentablock Copolymers Induced by Solution Extrusion

Science.gov (United States)

Harada, Tamotsu; Bates, Frank S.; Lodge, Timothy P.

2002-03-01

Highly oriented structure of a poly(styrene-co-butadiene) pentablock copolymer (Mw; 104,700 g/mol, weight percentage of polybutadiene blocks; 29 wt of concentrated solutions. The pentablock copolymer was dissolved into mixtures of toluene and heptane, and the polymer concentration ranged from 40 wt extrusion, the pentablock copolymer was solidified either by coagulation in methanol or by evaporation of the solvent. Interestingly, a highly oriented lamellar structure was confirmed through the small angle X-ray scattering over a specific range of heptane composition, which is a good solvent for polybutadiene, although the hexagonal cylinder morphology was identified for the melt sample. The transition from the oriented lamellar to highly oriented cylinder structure was observed by annealing the samples at temperatures above the glass transition temperature of polystyrene. Moreover, a transition from parallel to perpendicular orientation in the lamellar state was observed with an increase of the extrusion shear rate. A comparison between pentablock and triblock copolymers will be also discussed.

Load-release of small and macromolecules from elastomers with reversible gyroid mesoporosity

DEFF Research Database (Denmark)

Guo, Fengxiao; Schulte, Lars; Ndoni, Sokol

2012-01-01

. However, in the gel state in the presence of a good solvent the swollen matrix did show a nanoporous structure originated from the gyroid block copolymer precursor. Nanopores can be opened or closed depending on the presence or absence of a solvent. Macromolecules like PEG of different molecular weights......A collapsed elastomeric matrix of lightly cross-linked 1,2-polybutadiene (1,2-PB) was prepared from a self-assembled 1,2-polybutadiene-b- polydimethylsiloxane (1,2-PB-b-PDMS) of gyroid morphology after the removal of the PDMS block. No mesoporosity could be observed in the material in the dry state...... or small molecules like the surfactant SDS were loaded into the opened nanoporous matrix in the presence of a solvent and remained trapped. The loaded molecules could be released again in the presence of a solvent. The load and release of the molecules in deuterated form were monitored by in situ time...

Direct laser writing for nanoporous liquid core laser sensors

DEFF Research Database (Denmark)

Grossmann, Tobias; Christiansen, Mads Brøkner; Peterson, Jeffrey

2012-01-01

We report the fabrication of nanoporous liquid core lasers via direct laser writing based on two-photon absorption in combination with thiolene-chemistry. As gain medium Rhodamine 6G was embedded in the nanoporous polybutadiene matrix. The lasing devices with thresholds of 19 µJ/mm2 were measured...

Proton conducting sulphonated fluorinated poly(styrene) crosslinked electrolyte membranes

Energy Technology Data Exchange (ETDEWEB)

Soules, A.; Ameduri, B.; Boutevin, B.; David, G. [Institut Charles Gerhardt UMR CNRS 5253 Equipe, Ingenierie et Architectures Macromoleculaires,' ' Ecole Nationale Superieure de Chimie de Montpellier, 8 rue de l' Ecole Normale, 34296 Montpellier, Cedex 05 (France); Perrin, R. [CEA Le Ripault Departement des Materiaux, DMAT/SCMF/LSTP, BP16 - 37260 Monts (France); Gebel, G. [Structure et Proprietes des Architectures Moleculaires UMR 5819 (CEA-CNRS-UJF), INAC, SPrAM, CEA Grenoble, 17 Rue des Martyrs, 38054 Grenoble, Cedex 9 (France)

2011-10-15

Potential membranes for polymer electrolyte membrane fuel cell based on crosslinked sulphonated fluorinated polystyrenes (PS) were synthesised in two steps. First, azide-telechelic polystyrene was obtained by iodine transfer polymerisation of styrene in the presence of 1,6-diiodoperfluorohexane followed by azido chain-end functionalisation. Then azide-telechelic polystyrene was efficiently crosslinked with 1,10-diazido-1H,1H,2H,2H,9H,9H,10H,10H-perfluorodecane under UV irradiation. After 45 min only, almost completion of azide crosslinking could be achieved, resulting in crosslinked membranes with insoluble fractions higher than 95%. The sulphonation of the crosslinked membranes afforded ionic exchange capacities (IECs) ranging from 2.2 to 3.2 meq g{sup -1}. The hydration number was shown to be very high (from 30 to 75), depending on both the content of perfluorodecane and of sulphonic acid groups. The morphology of the membranes, assessed by small-angle X-ray scattering, was found to be a lamellar-type structure with two types of ionic domains. For the membrane that exhibited an IEC value of 2.2 meq.g{sup -1}, proton conductivity was in the same range as that of Nafion {sup registered} (120-135 mS.cm{sup -1}), whereas the membrane IEC value of 3.2 meq.g{sup -1} showed a proton conductivity higher than that of Nafion {sup registered} in liquid water from 25 to 80 C, though a high water uptake. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Radiation chemistry of amino acids, peptides and proteins in relation to the radiation sterilization of high-protein foods. [106 references

Energy Technology Data Exchange (ETDEWEB)

Garrison, W.M.

1979-03-01

An important source of information on the question of whether or not toxic or other deleterious substances are formed in the radiation sterilization of foods is the chemical study of reaction products and reaction mechanisms in the radiolysis of individual food components. The present evaluation of the radiation chemistry of amino acids, peptides and proteins outlines the various radiation-induced processes which lead to amino acid degradation and to the synthesis of amino acid derivatives of higher molecular weight. Among the latter are the ..cap alpha..,..cap alpha..'-diamino dicarboxylic acids which are formed as major products in the radiolysis of peptides both in aqueous solution and in the solid state. The ..cap alpha..,..cap alpha..'-diamino acids are of particular interest as irradiation products because they represent a class of compounds not normally encountered in plant and animal protein sources. Such compounds have, however, been isolated from certain types of bacteria and pathogenic toxins. All of the available data strongly suggest that the ..cap alpha..,..cap alpha..'-diamino acids are produced in significant yield in the radiation sterilization of high protein foods. The importance of initiating extensive chemical and biological studies of initiating extensive chemical and biological studies of these and of other high molecular weight products in irradiated food is emphasized.

Structural and surface properties of novel polyurethane films

Czech Academy of Sciences Publication Activity Database

Špírková, Milena; Strachota, Adam; Urbanová, Martina; Baldrian, Josef; Brus, Jiří; Šlouf, Miroslav; Kuta, A.; Hrdlička, Z.

2009-01-01

Roč. 24, č. 10 (2009), s. 1185-1189 ISSN 1042-6914 R&D Projects: GA MPO FT-TA3/034; GA AV ČR IAA400500505 Institutional research plan: CEZ:AV0Z40500505 Keywords : montmorillonite * nanoadditives * polybutadiene diol Subject RIV: CD - Macromolecular Chemistry Impact factor: 0.968, year: 2009

Novel CO{sub 2}-thickeners for improved mobility control

Energy Technology Data Exchange (ETDEWEB)

Enick, Dr. Robert M.; Beckman, Dr. Eric J.; Hamilton, Dr. Andrew

2000-02-02

The objective of this study was to design, synthesize, and characterize thickening agents for dense carbon dioxide and to evaluate their solubility and viscosity-enhancing potential in CO{sub 2}. Previously, fluoroacrylate homopolymers and fluorinated telechelic ionomers were shown to increase the viscosity of carbon dioxide by a factor of 3--4 at concentrations of 2--3 at concentrations of 4--5 wt%. This report details the findings for several new types of carbon dioxide thickening candidates. Hydrocarbon-fluorocarbon random copolymers, sulfonated hydrocarbon-fluorocarbon random copolymers, semifluorinated trialkyltin fluorides and small hydrogen-bounding compounds were evaluated.

Unreacted equation of states of typical energetic materials under static compression: A review

International Nuclear Information System (INIS)

Zheng Zhaoyang; Zhao Jijun

2016-01-01

The unreacted equation of state (EOS) of energetic materials is an important thermodynamic relationship to characterize their high pressure behaviors and has practical importance. The previous experimental and theoretical works on the equation of state of several energetic materials including nitromethane, 1,3,5-trinitrohexahydro-1,3,5-triazine (RDX), 1,3,5,7-tetranitro-1,3,5,7-tetrazacyclooctane (HMX), hexanitrostilbene (HNS), hexanitrohexaazaisowurtzitane (HNIW or CL-20), pentaerythritol tetranitrate (PETN), 2,6-diamino-3,5-dinitropyrazine-1-oxide (LLM-105), triamino-trinitrobenzene (TATB), 1,1-diamino-2,2-dinitroethene (DADNE or FOX-7), and trinitrotoluene (TNT) are reviewed in this paper. The EOS determined from hydrostatic and non-hydrostatic compressions are discussed and compared. The theoretical results based on ab initio calculations are summarized and compared with the experimental data. (topical review)

Effect of gamma radiation on properties of a composite rocket propellant

International Nuclear Information System (INIS)

Dedgaonkar, V.G.; Pol, V.G.; Navle, P.B.; Ghorpade, V.G.; Wani, V.S.

2000-01-01

Gamma radiation was employed for modifying the properties of a composite rocket propellant prepared in a standard way. It was observed that when the same gamma dose was imparted to hydroxy terminated polybutadiene (HTPB) then converted into propellant, the enhancement in the properties was much larger than the irradiated propellant samples. (author)

Psittacula krameri

Indian Academy of Sciences (India)

Unknown

*Department of Zoology, University of Burdwan, Burdwan 713 104, India ... Formoguanamine (2,4-diamino-s-triazine) was known to be an effective chemical agent in inducing blindness in .... The present communication reports for the first time ...

Space-Dependent Dynamics in 1,4-Polybutadiene Nanocomposite

Science.gov (United States)

2013-01-01

Soxhlet extracted with cyclohexane to remove unattached polymer. The initial composition of 20.5% by volume carbon increased to 60% on extraction...spectroscopy the value of β(Q) for the nanocomposite; instead, we determine at each Q the β value yielding the expected τα ∼ Q−2/β behavior for small Q

Grafted polybutadiene for fast retrieval of optical information

Czech Academy of Sciences Publication Activity Database

Mysliwiec, J.; Czajkowski, M.; Miniewicz, A.; Kochalska, Anna; Sedláková, Zdeňka; Nešpůrek, Stanislav

2009-01-01

Roč. 106, č. 5 (2009), 53108_1-53108_4 ISSN 0021-8979 R&D Projects: GA AV ČR KAN400720701 Institutional research plan: CEZ:AV0Z40500505 Keywords : holographic gratings * liquid crystal polymers * multiwave mixing Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.072, year: 2009

Dynamics of photoinduced motions in azobenzene grafted polybutadienes

Czech Academy of Sciences Publication Activity Database

Mysliwiec, J.; Czajkowski, M.; Miniewicz, A.; Bartkiewicz, S.; Kochalska, Anna; Poláková, Lenka; Sedláková, Zdeňka; Nešpůrek, Stanislav

2011-01-01

Roč. 33, č. 9 (2011), s. 1398-1404 ISSN 0925-3467 R&D Projects: GA AV ČR KAN401770651 Institutional research plan: CEZ:AV0Z40500505 Keywords : side-chain liquid crystalline polymers * dynamic holography * photochromism Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 2.023, year: 2011

Synthesis of a Diamino Substituted Terphenyldivinyl Chromophore

Directory of Open Access Journals (Sweden)

Jun-Ru Wang

2009-06-01

Full Text Available (E,E-1,4-bis(4'-aminostyryl-2,5-bis(octyloxy-benzene (6 and its derivative (E,E-1,4-bis(4'-acetamidostyryl-2,5-bis(octyloxy-benzene (7 were synthesized and characterized after alkylation, bromomethylation, Horner-Emmons reaction and reduction from hydroquinone. In order to gain more molecular electronic data, HOMO and LUMO of compound 6 have been calculated by Gaussian 03 W.

Elastomeric neutron shielding material and process of production

International Nuclear Information System (INIS)

John, G.; Knorr, W.

1987-01-01

Elastomeric neutron shielding material made of plastic with high hydrogen content, characterized in that the shielding material is a polymeric reaction product of a reaction between (a) polyol on the base of polybutadiene which compares with polyethylene with regard to hydrogen content, and (b) aliphatic diisocyanate, and in that the hydrogen content is higher than 8 weight per cent. (orig.) [de

Preparation and characterization of polyurethane - Fe powder composites

Czech Academy of Sciences Publication Activity Database

Špírková, Milena; Bureš, R.; Fáberová, M.; Trchová, Miroslava; Strachota, Adam; Kaprálková, Ludmila

2011-01-01

Roč. 11, 3/4 (2011), s. 290-299 ISSN 1335-8987 R&D Projects: GA ČR GAP108/10/0195 Institutional research plan: CEZ:AV0Z40500505 Keywords : polyurethanes * polybutadiene diol * Fe powder Subject RIV: CD - Macromolecular Chemistry http://www.imr.saske.sk/pmp/issue/3-4-2011/PMP_Vol11_No3-4_p_290-299.pdf

Preparation and Characterization of Fluorinated Hydrophobic UV-Crosslinkable Thiol-Ene Polyurethane Coatings

OpenAIRE

Wenjing Xia; Nianqing Zhu; Rongjie Hou; Wengui Zhong; Mingqing Chen

2017-01-01

The polyurethane prepolymer terminated with a double bond was synthesized using isophorone diisocyanate (IPDI), hydroxyl terminated polybutadiene (HTPB), 1,4-butanediol (BDO), and 2-hydroxyethyl acrylate (HEA). Then, a series of innovative UV-curable polyurethane coatings were prepared by blending ene-terminated polyurethane, fluoroacrylate monomer, and multifunctional thiol crosslinker upon UV exposure. The incorporation of fluoroacrylate monomer and multifunctional thiols into polyurethane ...

Preparation and Separation of Telechelic Carborane-Containing Poly(ethylene glycol)s

Czech Academy of Sciences Publication Activity Database

Matějíček, P.; Uchman, M.; Lepšík, Martin; Srnec, Martin; Zedník, J.; Kozlík, P.; Kalíková, K.

2013-01-01

Roč. 78, č. 6 (2013), s. 528-535 ISSN 2192-6506 R&D Projects: GA AV ČR IAAX00320901 Grant - others:GA ČR(CZ) GPP208/12/P236 Institutional support: RVO:61388963 Keywords : carboranes * click chemistry * poly(ethylene glycol) * quantum chemistry * reaction mechanisms Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.242, year: 2013

Synthesis and characterization of a microporous 6FDA-polyimide made from a novel carbocyclic pseudo Tröger's base diamine: Effect of bicyclic bridge on gas transport properties

KAUST Repository

Abdulhamid, Mahmoud A.

2017-10-12

A newly designed carbocyclic pseudo Tröger\\'s base diamine (CTB) monomer, 2,8-dimethyl-3,9-diamino-5,6,11,12-tetrahydro-5,11-methanodibenzo[a,e][8]annulene (CTBDA) and its isomeric analogue 2,8-dimethyl-(1,7)(4,10)(3,9)-diamino-5,6,11,12-tetrahydro-5,11-methanodibenzo[a,e][8]annulene (iCTBDA), were designed for the synthesis of microporous 6FDA-based polyimides (6FDA-CTBDA and 6FDA-iCTBDA). Both polyimides were soluble, exhibited excellent thermal stability of ∼490 °C, and had high surface areas of 587 m2 g−1 (6FDA-CTBDA) and 562 m2 g−1 (6FDA-iCTBDA). A 6FDA-based polyimide derived from 4,10-dimethyl-3,9-diamino-6H,12H-5,11-methanodibenzo[b,f][1,5]-diazocine (6FDA-TBDA) was made for comparison to investigate the effects of the basic tertiary nitrogen functionality in the Tröger\\'s base diamine on the polymer properties relative to the carbocyclic 6FDA-CTBDA analogue. 6FDA-TBDA displayed lower gas permeabilities but moderately higher gas-pair permselectivities than 6FDA-CTBDA. The enhanced permselectivity of 6FDA-TBDA resulted exclusively from higher diffusion-based selectivity. Direct gas sorption measurements demonstrated that the basicity in the Tröger\\'s base bridge moiety enhanced the sorption capacity of CO2 only slightly and had no effect on the CO2/CH4 solubility selectivity in 6FDA-TBDA vs. 6FDA-CTBDA.

Gel Electrolytes of Covalent Network Polybenzimidazole and Phosphoric Acid by Direct Casting

DEFF Research Database (Denmark)

Kirkebæk, Andreas; Aili, David; Henkensmeier, Dirk

2017-01-01

for preparing mechanically robust covalent network polybenzimidazole membranes containing up to 95 wt% phosphoric acid. Diamino-terminal pre-polymers of different chain lengths are first prepared, followed by addition of a trifunctional carboxylic acid. The crude solutions are cast and subsequently heat treated...

Synthesis of conformationally restricted beta-turn mimics

NARCIS (Netherlands)

IJsselstijn, M.

2006-01-01

This thesis aims at developing methods for introducing conformational restriction in Beta-turns, the turn elements present in Beta-sheets. A conformationally restricted peptide might either be formed via incorporation of a bridging diamino acids in a growing peptide chain, or via covalent bond

A simple building-block route to (phosphanyl-carbene)palladium complexes via intermolecular addition of functionalised phosphanes to isocyanides

NARCIS (Netherlands)

Eberhard, M.R.; van Vliet, B.; Durán Páchon, L.; Rothenberg, G.; Eastham, G.; Kooijman, H.; Spek, A.L.; Elsevier, C.J.

2009-01-01

We present a straightforward protocol for making (phosphanyl-carbene)PdII complexes. These complexes have bidentate ligands containing an acyclic diamino- or aminooxy-carbene and a phosphane. The synthesis gives good yields (typically 70-90 %) for a variety of complexes (22 compounds). Moreover, it

Simple building-block route to (Phosphanyl-carbene)palladium complexes via intermolecular addition of functionalised phosphanes to isocyanides

NARCIS (Netherlands)

Eberhard, M.R.; van Vliet, Bart; Durán Páchon, L.; Rothenberg, G.; Eastham, G.; Kooijman, H.; Spek, A.L.; Elsevier, C.J.

2009-01-01

We present a straightforward protocol for making (phosphanyl- carbene)PdII complexes. These complexes have bidentate ligands containing an acyclic diamino- or aminooxycarbene and a phosphane. The synthesis gives good yields (typically 70–90%) for a variety of complexes (22 compounds). Moreover, it

In situ cyclization modification in polymerization of butadiene by rare earth coordination catalyst

International Nuclear Information System (INIS)

Wang Chaoyang

2005-01-01

Butadiene was polymerized to a certain extent in the presence of a rare earth coordination catalyst, neodymium compound of neodymium chloride and i-propyl alcohol and triethyl aluminum (NdCl 3 ·3i-PrOH-AlEt 3 ) in toluene and the allyl chloride was then added to the reactive solution in order to in situ cyclize the formed polybutadiene and cyclopolymerize the unreacted butadiene monomers. Effects of molar ratio of allylchloride to AlEt 3 (Cl/Al), cyclization reaction time and temperature, butadiene and NdCl 3 ·3i-PrOH concentrations on the cyclization reaction have been investigated. The cyclization reaction is very quick, only several minutes. The cyclization reaction temperature has few effects on the properties of the cyclized product. Cl/Al is a very important condition for this reaction system. Cyclized polybutadiene has a low value of intrinsic viscosity, free gelling and high yield at high Cl/Al. The microstructures and properties of the cyclized products have been characterized by Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy and gel permeation chromatography. The cyclization mechanism is put forward

Dynamics of polymers

Energy Technology Data Exchange (ETDEWEB)

Buchenau, U [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Energieverfahrenstechnik

1996-11-01

Neutron scattering from amorphous polymers allows to switch from incoherent to coherent scattering in the same substance. The power of the tool for the study of the picosecond dynamics of disordered matter is illustrated for polybutadiene, polycarbonate and polystyrene. The results suggest a mixture of sound waves and localized modes, strongly interacting with each other, in the picosecond range. (author) 8 figs., tabs., 39 refs.

Deoxyiminoalditols from Aldonic Acids - VI. - Preparation of the Four Stereoisomeric 4-Amino-3-hydroxypyrrolidines from Bromodeoxytetronic Acids. Discovery of a New alfa-Mannosidase Inhibitor

DEFF Research Database (Denmark)

Lundt, Inge; Limberg, Gerrit; Zavilla, John

1999-01-01

A convenient four step synthesis of amino hydroxy pyrrolidines is presented. From the readily available D- and L-tetronic acids the four possible stereoisomeric 4-amino-3-hydroxy pyrrolidines 14, 15, 17 and 19 could be accessed as crystalline compounds, avoiding any chromatographic purification....... The key step in the reactions was the regioselective formation of either the 2,4-diamino-2,4-dideoxy-D-threono-1,4-lactam (5) or the 3,4-diamino-3,4-dideoxy-L-erythrono-1,4-lactam (10) by treatment of the methyl 4-bromo-4-deoxy-2,3-cis- 3 or 2,3-trans- 9 epoxy tetronates, respectively, with liquid ammonia....... Thus, opposite regioselectivity for opening of the cis-configurated epoxide 3 (4 : 1, C-2 : C-3) and the trans-configurated epoxide 9 (3 : 7, C-2 : C-3) by ammonia was observed. - Initial testing as glycosidase inhibitors of the amino hydroxy pyrrolidines formed by reduction of the lactams showed...

Morphological analysis of ionomers

International Nuclear Information System (INIS)

1991-01-01

Anomalous small-angle x-ray scattering (SAXS) investigations were carried out on amorphous and semi-crystalline ionomers (Ni- neutralized sulfonated polystyrene ionomers, polyurethane ionomer). Ionomers with semicrystalline matrices (three-phase materials) were also studied with SAXS (poly(ethylene-co-methacrylic acid) ionomer). Ethylene oxide units were incorporated into the backbone of sulfonated polyurethane ionomers in an attempt to induce aggregate dissociation. Small-angle neutron scattering was used to study the effect of ionic aggregation on ionomer chain dimensions in telechelic and model polyurethane ionomers. Studies have been completed on carboxylated and sulfonated model polyurethane ionomers in order to determine the effect of the pendant ionic group on ionomer structure- property relationships (mechanical properties)

Physical crosslinking effects in alpha,omega-dihydroxy terminated polybutadienes

Czech Academy of Sciences Publication Activity Database

Krakovský, I.; Hanyková, L.; Trchová, Miroslava; Baldrian, Josef; Wübbenhorst, M.

2007-01-01

Roč. 48, č. 7 (2007), s. 2079-2086 ISSN 0032-3861 Institutional research plan: CEZ:AV0Z40500505 Keywords : hydrogen bonding * glass transition * dielectric relaxation Subject RIV: CD - Macromolecular Chemistry Impact factor: 3.065, year: 2007

Computational Studies of Ionic Liquids

National Research Council Canada - National Science Library

Boatz, Jerry

2004-01-01

The structures and relative energies of the six possible N-protonated structures of the 1,5-diamino-1,2,3,4-tetrazolium cation have been computed at the B3LYP(3)/6-311G(d,p) and MP2/6-311G(d,p) levels of theory...

Peptide Macrocycles Featuring a Backbone Secondary Amine: A Convenient Strategy for the Synthesis of Lipidated Cyclic and Bicyclic Peptides on Solid Support

DEFF Research Database (Denmark)

Oddo, Alberto; Münzker, Lena; Hansen, Paul Robert

2015-01-01

A convenient strategy for the on-resin synthesis of macrocyclic peptides (3- to 13-mers) via intramolecular halide substitution by a diamino acid is described. The method is compatible with standard Fmoc/tBu SPPS and affords a tail-to-side-chain macrocyclic peptide featuring an endocyclic secondary...

Journal of Biosciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

Keywords. Blindness; formoguanamine; retinopathy; roseringed parakeet. Abstract. Formoguanamine (2,4-diamino-s-triazine) was known to be an effective chemical agent in inducing blindness in poultry chicks, but not in adult birds. The present study was undertaken to demonstrate the influences, if any, of this chemical on ...

Polymer compound

NARCIS (Netherlands)

1995-01-01

A Polymer compound comprising a polymer (a) that contains cyclic imidesgroups and a polymer (b) that contains monomer groups with a 2,4-diamino-1,3,5-triazine side group. According to the formula (see formula) whereby themole percentage ratio of the cyclic imides groups in the polymer compoundwith

Mesogenic polybuthadiene diols with thiol side-chain units: synthesis and thermal behaviour

Czech Academy of Sciences Publication Activity Database

Bubnov, Alexej; Kašpar, Miroslav; Sedláková, Zdeňka

2010-01-01

Roč. 83, č. 1 (2010), 16-27 ISSN 0141-1594 R&D Projects: GA AV ČR IAA100100911; GA AV ČR(CZ) GA202/09/0047; GA MŠk OC 175 Institutional research plan: CEZ:AV0Z10100520; CEZ:AV0Z40500505 Keywords : mesogenic polymer * phase transition * polybutadiene diol * side -chain polymer Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.006, year: 2010

SPECT/CT imaging of radiolabeled cubosomes and hexosomes for potential theranostic applications

DEFF Research Database (Denmark)

Nilsson, Christa; Barrios-Lopez, Brianda; Kallinen, Annukka

2013-01-01

We have developed a highly efficient method for the radiolabeling of phytantriol (PHYT)/oleic acid (OA)-based hexosomes based on the surface chelation of technetium-99m ((99m)Tc) to preformed hexosomes using the polyamine 1, 12-diamino-3, 6, 9-triazododecane (SpmTrien) as chelating agent. We also...

BIOTRANSFORMATION OF 2,4,6-TRINITROTOLUENE (TNT) BY A PLANT-ASSOCIATED FUNGUS FUSARIUM OXYSPORUM

Science.gov (United States)

The capability of a plant-associated fungus, Fusarium oxyvorum, to transform TNT in liquid cultures was investigated. TNT was transformed into 2-amino-4, 6-dinitrotoluene (2-A-DNT), 4-amino-2, 6-dinitrotoluene (4-A- DNT), and 2, 4-diamino-6-nitrotoluene (2, 4-DAT) via 2- and 4-hy...

Electrophilic Cleavage and Functionalization of Polyisobutylenes Bearing Unsaturations in the Backbone and Synthesis of Polymers for this Process

Science.gov (United States)

Campbell, Christopher Garrett

Polyisobutylene is a polymer of high commercial and academic interest due to its low cost of synthesis, high gas barrier properties, and high chemical and oxidative stability. Polyisobutylene (PIB) can only be synthesized by the cationic polymerization of isobutylene (IB). Commercial processes are currently only capable of producing monofunctional PIB or copolymers thereof. The living cationic polymerization of isobutylene is capable of producing difunctional telechelic PIB, but at the expense of difficultly or expensively synthesized initiators. Thus there exists a need for new synthetic routes for multifunctional PIBs, which can be adopted on a commercial scale. In the first project, we demonstrated a new reaction, which is a subset of the Friedel Crafts alkylation reaction, in which the alkylating carbocation undergoes a cleavage reaction prior to reaction with the aromatic substrate. This reaction was discovered by the observation that when a PIB containing a large amount of coupled fraction was subjected to a mixture of protic and Lewis acids (HCl/TiCl4) in the presence of an alkoxybenzene compound, the coupled fraction was quantitatively converted to its constituent monofunctional chains, which became functionalized by the alkoxybenzene. In the second project, a commercial polymer, poly(isobutylene- co-isoprene) (butyl rubber) was used as a substrate upon which the aforementioned electrophilic cleavage and functionalization reaction was performed. The goal of this project was to degrade a high molecular weight, main-chain olefin-containing copolymer of isobutylene into low molecular weight difunctional telechelic polyisobutylenes. This general process, though not necessarily proceeding by the aforementioned novel chemical reaction, has been described in the literature as "constructive degradation." Though we were unable to synthesize truly telechelic polyisobutylenes by this method, we were able to demonstrate this method as a viable route to low molecular

The properties of dangling chain-networks prepared by cyclotrimerization of telechelic diisocyanates

Czech Academy of Sciences Publication Activity Database

Budinski-Simendic, J.; Špírková, Milena; Dušek, Karel; Dikic, T.; Radičevic, R.; Prendzov, S.; Krakovský, I.; Ilavský, Michal

2006-01-01

Roč. 518, č. 7 (2006), s. 399-404 ISSN 0255-5476. [Yugoslav Materials Research Society Conference Yucomat /7./. Herceg Novi, 12.9.2005-16.9.2005] Institutional research plan: CEZ:AV0Z40500505 Keywords : cascade theory * crosslinking * isocyanurate ring Subject RIV: CD - Macromolecular Chemistry Impact factor: 0.399, year: 2005

Avaliação do bis(4-metilfenilditiocarbimatozincato(II de tetrabutilamônio como acelerador no processo de vulcanização do elastômero polibutadieno Evaluation of [tetrabutyl ammonium bis(4-methylphenyldithiocarbimatezincate-2] as accelerator in vulcanization process of polybutadiene elastomer

Directory of Open Access Journals (Sweden)

Leonardo F. V. dos Santos

2011-01-01

Full Text Available O ZNIBU, acelerador de caráter lento foi avaliado neste trabalho em composições de polibutadieno. Este acelerador foi sintetizado com o objetivo de substituir, ou reduzir, o uso de alguns aceleradores comerciais muito utilizados em composições elastoméricas mas que, por serem formadores de nitrosaminas, podem ser prejudiciais à saúde. A fim de corrigir o caráter de acelerador lento do ZNIBU, este composto foi utilizado em conjunto com o acelerador comercial CBS (N-ciclohexil-2-benzotiazol-2-sulfenamida. Foi observado que pequenas quantidades dos dois aceleradores não são efetivas na aceleração da vulcanização nas composições do tipo goma pura. No entanto a presença de negro de fumo exerce um efeito positivo sobre a velocidade. As propriedades mecânicas estudadas mostram que o ZNIBU aumenta a resistência à tração da goma pura (35%, em comparação com a composição similar vulcanizada com CBS e, na presença do negro de fumo, este aumento é ainda mais expressivo (175%. Quanto à resistência ao rasgamento, a vulcanização com o ZNIBU forneceu o mais baixo valor da propriedade para a goma pura, enquanto que a composição com negro de fumo apresentou o mais alto valor.ZNIBU, a slow accelerator, was evaluated in polybutadiene compositions. This accelerator was synthesized intending to replace or reduce the use of some very used commercial accelerators in rubber compositions which, due to their nitrosamine-forming potential, can be harmful to health. In order to correct for the slow accelerating character ZNIBU was used in combination with the commercial accelerator CBS (N-cyclohexyl-2-benzothiazole-2-sulfenamide. It was observed that small amounts of the accelerators are not effective in the vulcanization accelerating process of gum type compositions. Nevertheless, the presence of carbon black exerts a positive effect on the reaction rate. The investigated mechanical properties show that ZNIBU improves stress strength of

Rheological Properties in Aqueous Solution for Hydrophobically Modified Polyacrylamides Prepared in Inverse Emulsion Polymerization

Directory of Open Access Journals (Sweden)

Shirley Carro

2017-01-01

Full Text Available Inverse emulsion polymerization technique was employed to synthesize hydrophobically modified polyacrylamide polymers with hydrophobe contents near to feed composition. Three different structures were obtained: multisticker, telechelic, and combined. N-Dimethyl-acrylamide (DMAM, n-dodecylacrylamide (DAM, and n-hexadecylacrylamide (HDAM were used as hydrophobic comonomers. The effect of the hydrophobe length of comonomer, the initial monomer, and surfactant concentrations on shear viscosity was studied. Results show that the molecular weight of copolymer increases with initial monomer concentration and by increasing emulsifier concentration it remained almost constant. Shear viscosity measurements results show that the length of the hydrophobic comonomer augments the hydrophobic interactions causing an increase in viscosity and that the polymer thickening ability is higher for combined polymers.

Chemical product dictionary

International Nuclear Information System (INIS)

Mun, Seong Myeong

1989-10-01

This book deals with synthetic rubber in the first part: Poly norbornene rubber, Polysulfide rubber, FKM, Fluoridated rubber, BR, CR, Syndiotactic 1,2 - Polybutadiene, Silicone rubber, IR, IIR, ACM, Liquid rubber, SBR, EVA, Co, NBR, TPE, SBC, TPVC, TPO, TPU, TPAE, TPEE, Urethane rubber, CSM, and propylene oxide rubber. The second part describes organic rubber chemical carbon black, processing aid, zinc salts of fatty acids, Exton L-2, Exton k-1, and vulcanizing agent.

Ballistic Missile Propellant Evaluation Test Motor System (Super BATES)

Science.gov (United States)

1974-11-25

eiastomeric additive carbon phenolic NBR Buna-N rubber NDT nondestructive testing O&QR operation and quality record P pressure PB.AN polybutadiene...nozzle except for the 450 entrance angle. The same ablative and insulative materials are used in both nozzles. Silica-asbestos filled NBR insulation is...vendor’s option and with UTC approval. The rubber insulation used on the submerged nozzle is fabricated by laying up unvulcanized sheets of rubber to

The second Workshop on Alternative Sources of Energy of Vegetable Origin

International Nuclear Information System (INIS)

Lutz, Giselle; Mata Segreda, Julio F.

2008-01-01

Diesel diffuses into neoprene matrices 10% faster than palm ethyl biodiesel at 20 degrees celsius. In contrast, the palm biodiesel soaks highly plasticised PVC five times faster than diesel. Phthalate plasticizer leaks from the PVC matrix 14 times faster when biodiesel is the absorbed liquid, relative to petrodiesel. This biodiesel penetrates polybutadiene-styrene resins at rates that depend on the ratio of phenyl to CH=CH units in the resins. (author) [es

2,2-Dinitroethene-1,1-Diamine

Czech Academy of Sciences Publication Activity Database

Šimková, Ludmila; Liška, F.; Ludvík, Jiří

2011-01-01

Roč. 15, č. 17 (2011), s. 2983-2995 ISSN 1385-2728 R&D Projects: GA ČR GAP206/11/0727; GA MŠk ME09002 Institutional research plan: CEZ:AV0Z40400503 Keywords : 1,1-diamino-2,2-dinitroethene * FOX-7 * DADNE Subject RIV: CG - Electrochemistry Impact factor: 3.064, year: 2011

3,5-bis(acylamino) benzamides

International Nuclear Information System (INIS)

1976-01-01

Certain 3,5-disubstituted, 2,4,6-triiodoanilides of polyhydroxymonobasic acids have recently been found useful as non-ionic x-ray contrast agents. The 3-(lower acylamino)-5-amino-2,4,6-triiodobenzamides are prepared by hydrogenation of a 3,5-dinitrobenzamide, acylation of the resulting diamino compound to the bis-(acylamino) level and iodination of the acylamino compound

Pulse radiolytic reduction of amino and hydroxy disubstituted anthraquinones (Preprint no. RC-15)

International Nuclear Information System (INIS)

Pal, H.; Palit, D.K.; Mukherjee, T.; Mittal, J.P.

1991-01-01

One-electron reduction of 1-amino-4-hydroxy-9, 10-anthraquinone (AHAQ) and 1,4-diamino-9, 10-anthraquinone (DAAQ) in various matrices has been investigated by electron pulse radiolysis. Spectroscopic and kinetic parameters, acid dissociation constants (pK a ) of the reduced semiquinone radicals and one-electron reduction potential for AHAQ have been measured. (author). 2 tabs

1,5-Diamino-2,6-dibromo-9,10-anthraquinone

Directory of Open Access Journals (Sweden)

Wilhelm Seichter

2012-03-01

Full Text Available In the title compound, C14H8Br2N2O2, the molecular structure features intramolecular N—H...O [2.639 (2 Å and 130°] and N—H...Br [3.053 (2 Å and 114°] hydrogen bonding. Due to inversion symmetry, the asymmetric part of the unit cell consits of one half-molecule. In the crystal, inversion dimers linked by pairs of N—H...O [2.955 (2 Å and 135°] hydrogen bonds occur. The structure also features C=O...π [3.228 (2 Å] and Br...Br [3.569 (1 Å] contacts.

Comparison of anti amoebic activity of stereoisomeric diamino and ...

Indian Academy of Sciences (India)

this plant.3 As already reported4,5 comparative eva- lution of antiamoebic ... and to know the quantum of change in the amoebici- dal behaviour of ... in coenine alkaloids of this plant. ∗ ..... Vaid R M 1988 Modulations of Kurchi alkaloids, Ph.D.

Thermoplastic polyurethanes from undecylenic acid-based soft segments: structural features and release properties.

Science.gov (United States)

Lluch, Cristina; Lligadas, Gerard; Ronda, Joan C; Galià, Marina; Cádiz, Virginia

2013-05-01

A set of thermoplastic polyurethanes is synthesized, combining undecylenic acid-derived telechelic diols as soft segments and 1,4-butanediol/4,4'-methylenebis(phenylisocyanate) as a hard segment (HS). These polymers are fully chemically and physically characterized by means of NMR and Fourier transform IR (FTIR) spectroscopy, size-exclusion chromatography (SEC), DSC, thermogravimetric analysis (TGA), tensile testing, and contact angle measurements. The obtained results reveal that both the molecular weight of the diol and the HS content greatly influence the physical and mechanical properties of these polymers. In addition, given the potential use of these materials for biomedical applications, hydrolytic degradation, their biocompatibility using a human fibroblast cell line, and performance as drug delivery carriers are evaluated. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Ultrasound-Promoted One-Pot, Four-Component Synthesis of Pyridin-2(1H-One Derivatives

Directory of Open Access Journals (Sweden)

Jinming Yang

2013-11-01

Full Text Available An efficient one-pot synthesis of 1,6-diamino-2-oxo-1,2,3,4-tetrahydro- pyridine-3,5-dicarbonitrile derivatives by four-component piperidine-catalyzed reactions of a ketone, malononitrile, ethyl cyanoacetate and hydrazine hydrate under ultrasound irradiation is described. This method provides several advantages such as shorter reaction times, excellent yields, and a simple workup procedure.

A straightforward approach towards combined α-amino and α-hydroxy acids based on Passerini reactions

Directory of Open Access Journals (Sweden)

Ameer F. Zahoor

2011-09-01

Full Text Available Complex amino acids with an α-acyloxycarbonyl functionality in the side chain are easily available through epoxide opening by chelated enolates and subsequent oxidation/Passerini reaction. This protocol works with both, aldehyde and ketone intermediates, as long as the ketones are activated by electron-withdrawing groups. In principle Ugi reactions are also possible, allowing the generation of diamino acid derivatives.

Combustion Mechanisms of Very High Burn Rate (VHBR) Propellant. Phase II.

Science.gov (United States)

1995-09-01

potassium salt of B10H1 2-. The Kraton slate and the Hycar slate both contain RDX as the oxidizer, while the PEG slate contains HMX and TAGN in the... polyacrylate (Hycar), hydroxy-terminated polybutadiene, and a mixture of styrene and ethylene-butylene (Kraton). As might be expected, when all else is equal...proprietary formulations of Teledyne-McCormick-Selph (TMS), designated H498 and H466. In H498, a potassium cation is utilized, while in H466, an

Vulcanization of rubber mixtures by simultaneous electron beam and microwave irradiation

Energy Technology Data Exchange (ETDEWEB)

Martin, D. E-mail: martin@ifin.nipne.ro; Ighigeanu, D.; Mateescu, E.; Craciun, G.; Ighigeanu, A

2002-08-01

The comparative results obtained by applying separate electron beam (EB) irradiation and simultaneous EB and microwave (MW) irradiation to vulcanization of rubber mixtures based on natural rubber and polybutadiene rubber with carbon black are presented. In the absence of MW, EB irradiation doses of 200-250 kGy are required in order to obtain a higher vulcanization degree. The irradiation doses as well as irradiation times were markedly diminished, from 2 to 6 times, by simultaneous EB and MW irradiation.

Novel thermosensitive telechelic PEGs with antioxidant activity: synthesis, molecular properties and conformational behaviour

Czech Academy of Sciences Publication Activity Database

Sergeeva, O.; Vlasov, P. S.; Domnina, N. S.; Bogomolova, Anna; Konarev, P. V.; Svergun, D. I.; Walterová, Zuzana; Horský, Jiří; Štěpánek, Petr; Filippov, Sergey K.

2014-01-01

Roč. 4, č. 79 (2014), s. 41763-41771 ISSN 2046-2069 R&D Projects: GA ČR GAP208/10/1600 Institutional support: RVO:61389013 Keywords : PEG * antioxidant * SANS Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.840, year: 2014

Monodentate Schiff base ligands: their structural characterization, photoluminescence, anticancer, electrochemical and sensor properties.

Science.gov (United States)

Köse, Muhammet; Ceyhan, Gökhan; Tümer, Mehmet; Demirtaş, Ibrahim; Gönül, İlyas; McKee, Vickie

2015-02-25

Two Schiff base compounds, N,N'-bis(2-methoxy phenylidene)-1,5-diamino naphthalene (L(1)) and N,N'-bis(3,4,5-trimethoxy phenylidene)-1,5-diamino naphthalene (L(2)) were synthesized and characterized by the analytical and spectroscopic methods. The electrochemical and photoluminescence properties of the Schiff bases were investigated in the different conditions. The compounds L(1) and L(2) show the reversible redox processes at some potentials. The sensor properties of the Schiff bases were examined and color changes were observed upon addition of the metal cations, such as Hg(II), Cu(II), Co(II) and Al(III). The Schiff base compounds show the bathochromic shift from 545 to 585 nm. The single crystals of the compounds (L(1)) and (L(2)) were obtained from the methanol solution and characterized structurally by the X-ray crystallography technique. The molecule L(2) is centrosymmetric whereas the L(1) has no crystallographically imposed molecular symmetry. However, the molecular structures for these compounds are quite similar, differing principally in the conformation about methoxy groups and the dihedral angle between the two aromatic rings and diamine naphthalene. Copyright © 2014 Elsevier B.V. All rights reserved.

Quantum mechanics and molecular dynamics simulations of complexation of alkaline-earth and lanthanide cations by poly-amino-carboxylate ligands

International Nuclear Information System (INIS)

Durand, S.

1999-01-01

Molecular dynamics (MD) simulations on lanthanide(III) and alkaline-earth(II) complexes with poly-amino-carboxylates (ethylene-diamino-tetra-acetate EDTA 4- , ethylene-diamino-tri-acetate-acetic acid EDTA(H) 3- , tetra-aza-cyclo-dodecane-tetra-acetate DOTA 4- , methylene-imidine-acetate MIDA 2- ) are reported. First, a consistent set of Lennard-Jones parameters for La 3+ , Eu 3+ and Lu 3+ cations has been derived from free energy calculations in aqueous solution. Observed differences in hydration free energies, coordination distances and hydration numbers are reproduced. Then, the solution structures of 1:1 complexes of alkaline-earth and/or lanthanide cations with EDTA 4- , EDTA(H) 3- , DOTA 4- and 1:2 complexes of lanthanide cations with MIDA 2- were studied by MD in water. In addition, free energy calculations were performed to study, for each ligand, the relative thermodynamic stabilities of complexes with Ca 2+ vs Sr 2+ and vs Ba 2+ on the one hand, and with La 3+ vs Eu 3+ and vs Lu 3+ on the other hand. Model does not take into account explicitly polarization and charge transfer. However, the results qualitatively agree with experimental complexation data (structure and selectivities). (author)

Spectroscopic studies of charge transfer complexes of some amino aromatic donors with some acceptors

International Nuclear Information System (INIS)

Al-Ani, S.S.

1989-01-01

Charge transfer (C.T.) complexes are the products of the weak reversible interactions between electron donors and electron acceptors. Sixteen novel C.T. complexes were studied and discussed. These complexes were formed from aromatic electron donors with various electron acceptors in absolute ethyl alcohol at 20 0 C. Electronic absorption spectra of these complexes and their donors and acceptors were taken. New charge transfer absorption bands appeared for these complexes in the UV-VIS region. The donors used are tetramethyl diamino benzophenone, P-amino-N:N-dimethyl aniline, tetramethyl-diamino-diphenylmethane, P-amino-azobenzene and benzidine, while the acceptors are iodine, bromine, picric acid, 2,4-dinitrophenol, trifluoroacetic acid and trichloroacetic acid. The results showed a disappearance of some donors and acceptors absorption bands. The energy of C.T. bands were calculated from which the ionization potentials of donors were obtained. The results showed that energies of C.T. Bands for complexes of a given donor with a series of acceptors are very similar. Some C.T. complexes showed low value of energy and high values of electrical conductivity. These are ionic complexes rather than molecular ones. 4 tabs.; 2 figs.; 99 refs

Enzymatic Synthesis of Highly Fluorescent 8-Azapurine Ribosides Using a Purine Nucleoside Phosphorylase Reverse Reaction: Variable Ribosylation Sites

Directory of Open Access Journals (Sweden)

Goran Mikleušević

2013-10-01

Full Text Available Various forms of purine-nucleoside phosphorylase (PNP were used as catalysts of enzymatic ribosylation of selected fluorescent 8-azapurines. It was found that the recombinant calf PNP catalyzes ribosylation of 2,6-diamino-8-azapurine in a phosphate-free medium, with ribose-1-phosphate as ribose donor, but the ribosylation site is predominantly N7 and N8, with the proportion of N8/N7 ribosylated products markedly dependent on the reaction conditions. Both products are fluorescent. Application of the E. coli PNP gave a mixture of N8 and N9-substituted ribosides. Fluorescence of the ribosylated 2,6-diamino-8-azapurine has been briefly characterized. The highest quantum yield, ~0.9, was obtained for N9-β-d-riboside (λmax 365 nm, while for N8-β-d-riboside, emitting at ~430 nm, the fluorescence quantum yield was found to be close to 0.4. Ribosylation of 8-azaguanine with calf PNP as a catalyst goes exclusively to N9. By contrast, the E. coli PNP ribosylates 8-azaGua predominantly at N9, with minor, but highly fluorescent products ribosylated at N8/N7.

Synthesis of 4-(3-t-butylamino-2-hydroxypropoxy)- benzimidazol -2 (/sup 11/C)-one (CGP 12177)

Energy Technology Data Exchange (ETDEWEB)

Boullais, C; Crouzel, C; Syrota, A

1986-05-01

4-(3-t-butylamino-2-hydroxypropoxy)-benzimidazol-2 (/sup 11/C)-one (CGP 12177) was synthesized in a short time (30 min) and with a specific activity of 130 mCi/..mu..Mo1 for ..beta.. receptor studies by the positron emission tomography. The radioactive reagent was /sup 11/C-phosgene and the starting material 1-(3-t-butylamino-2-hydroxypropoxy)-2,3-diamino benzene.

Structure analysis of adsorbed star-like polymers with GISAS and SFM

CERN Document Server

Wolkenhauer, M; Wunnicke, O; Stamm, M; Roovers, J; Krosigk, G V; Cubitt, R

2002-01-01

The lateral structures of dried adsorbed binary mixtures of star polymers were investigated. Blends of protonated and deuterated polybutadiene stars were prepared from cyclohexane solutions and adsorbed onto silicon substrates. The number of arms and the molecular weight of the arms was varied. With grazing incidence small angle scattering techniques (GISAS) and scanning force microscopy (SFM), different dominant in-plane length scales were determined. The morphology of these structures is dominated by blob-like structures created from single stars or agglomerates of star polymers. (orig.)

Gyroid Nanoporous Membranes with Tunable Permeability

DEFF Research Database (Denmark)

Li, Li; Schulte, Lars; Clausen, Lydia D.

2011-01-01

-linked 1,2-polybutadiene (1,2-PB) membranes with uniform pores that, if needed, can be rendered hydrophilic. The gyroid porosity has the advantage of isotropic percolation with no need for structure prealignment. Closed (skin) or opened (nonskin) outer surface can be simply realized by altering...... the effective diffusion coefficients of a series of antibiotics, proteins, and other biomolecules; solute permeation is discussed in terms of hindered diffusion. The combination of uniform bulk morphology, isotropically percolating porosity, controlled surface chemistry, and tunable permeability is distinctive...

Soluble Polymers with Intrinsic Porosity for Flue Gas Purification and Natural Gas Upgrading

KAUST Repository

Wang, Xinbo

2017-01-23

A soluble polymer with intrinsic microporosity, 2,4-diamino-1,3,5-triazine-functionalized organic polymer, is used for the first time as a solid adsorbent which provides an easy solution to overcome the fouling issue. Promising adsorption performances including good CO2 adsorption capacity, excellent CO2 /N2 and CO2 /CH4 selectivities, high chemical and thermal stabilities, and easiness of preparation and regeneration are shown.

Soluble Polymers with Intrinsic Porosity for Flue Gas Purification and Natural Gas Upgrading

KAUST Repository

Wang, Xinbo; Liu, Yang; Ma, Xiaohua; Das, Swapan Kumar; Ostwal, Mayur; Gadwal, Ikhlas; Yao, Kexin; Dong, Xinglong; Han, Yu; Pinnau, Ingo; Huang, Kuo-Wei; Lai, Zhiping

2017-01-01

A soluble polymer with intrinsic microporosity, 2,4-diamino-1,3,5-triazine-functionalized organic polymer, is used for the first time as a solid adsorbent which provides an easy solution to overcome the fouling issue. Promising adsorption performances including good CO2 adsorption capacity, excellent CO2 /N2 and CO2 /CH4 selectivities, high chemical and thermal stabilities, and easiness of preparation and regeneration are shown.

Utilizing the Power of Nanostructures to Their Fullest Capability in Energetic Formulations

Science.gov (United States)

2016-02-01

Fujihisa H, Honda K, Obata S, Yamawaki H, Takeya S, Gotoh Y, Matsunaga T. Crystal structure of anhydrous 5-aminotetrazole and its high-pressure behavior...multiple objective evolutionary strategies (MOES). Part 1: ReaxFF models for cyclotrimethylene trinitramine (RDX) and 1,1-diamino-2,2-dinitroethene...complex reactive force fields using multiple objective evolutionary strategies (MOES): Part 2: transferability of ReaxFF models to C-H-N-O

Chain-end modification of living anionic polybutadiene with diphenylethylenes and styrenes

NARCIS (Netherlands)

Donkers, E.H.D.; Willemse, R.X.E.; Klumperman, B.

2005-01-01

The first step in the transformation of poly(butadienyl)lithium into a macromolecular atom transfer radical polymerization initiator or reversible addition-fragmentation chain transfer agent is the modification of the anionic chain end into a suitable leaving/reinitiating group. We have investigated

Recuperación de Hips mediante sebs: Caracterización reológica y mecánica

Directory of Open Access Journals (Sweden)

Miguel Ángel Peydró Rasero

2013-02-01

Full Text Available The effect of reprocessing two mixtures: recycled high impact polystyrene (HIPS with polybutadiene (PB; and HIPS with styrene-ethylene-butylenestyrene (SEBS have been studied in this article. Our results show that tensile strength increases, while the lengthening and viscosity decrease, as the number of reprocessing cycles increases. If we mix PB or SEBS with degraded HIPS, the mechanical properties of the virgin material are recovered and the rheological behavior maintains the viscosity values for the mixture with PB but these diminish notably for the mixture with SEBS.

Quantum mechanics and molecular dynamics simulations of complexation of alkaline-earth and lanthanide cations by poly-amino-carboxylate ligands; Simulations par mecanique quantique et dynamique moleculaire de la complexation de cations alcalino-terreux et lanthanides par des ligands polyaminocarboxylates

Energy Technology Data Exchange (ETDEWEB)

Durand, S

1999-07-01

Molecular dynamics (MD) simulations on lanthanide(III) and alkaline-earth(II) complexes with poly-amino-carboxylates (ethylene-diamino-tetra-acetate EDTA{sup 4-}, ethylene-diamino-tri-acetate-acetic acid EDTA(H){sup 3-}, tetra-aza-cyclo-dodecane-tetra-acetate DOTA{sup 4-}, methylene-imidine-acetate MIDA{sup 2-}) are reported. First, a consistent set of Lennard-Jones parameters for La{sup 3+}, Eu{sup 3+} and Lu{sup 3+} cations has been derived from free energy calculations in aqueous solution. Observed differences in hydration free energies, coordination distances and hydration numbers are reproduced. Then, the solution structures of 1:1 complexes of alkaline-earth and/or lanthanide cations with EDTA{sup 4-}, EDTA(H){sup 3-}, DOTA{sup 4-} and 1:2 complexes of lanthanide cations with MIDA{sup 2-} were studied by MD in water. In addition, free energy calculations were performed to study, for each ligand, the relative thermodynamic stabilities of complexes with Ca{sup 2+} vs Sr{sup 2+} and vs Ba{sup 2+} on the one hand, and with La{sup 3+} vs Eu{sup 3+} and vs Lu{sup 3+} on the other hand. Model does not take into account explicitly polarization and charge transfer. However, the results qualitatively agree with experimental complexation data (structure and selectivities). (author)

Synthesis of Waterborne Polyurethane by the Telechelic α,ω-Di(hydroxypoly(n-butyl acrylate

Directory of Open Access Journals (Sweden)

Xin Chen

2018-02-01

Full Text Available A key for the preparation of polyacrylate-based polyurethane is the synthesis of hydroxyl-terminated polyacrylate. To our knowledge, exactly one hydroxyl group of every polyacrylate chain has not been reported. The hydroxyl-terminated poly(butyl acrylate (PBA has been successfully synthesized by degenerative iodine transfer polymerization (DITP of the n-butyl acrylate (n-BA using 4,4′-azobis(4-cyano-1-pentanol (ACPO and diiodoxylene (DIX as initiator and chain transfer agent, respectively, and subsequently substituted reaction of the iodine-terminated PBA with β-mercaptoethanol in alkaline condition. The latter reaction was highly efficient, and the terminal iodine at the end of polymer chains were almost quantitatively transformed to a hydroxyl group. 2,2′-Azobis(isobutyronitrile (AIBN and ACPO were used as initiators in the DITPs of n-BA. The results demonstrated that they had a significant influence on the terminal groups of the formed polymer chains. The structure, molecular weight, and molecular weight distribution of the hydroxyl-terminated PBA have been studied by 1H, 13C NMR, and GPC results. The components of hydroxyl-terminated PBA were determined by MALDI-TOF MS spectra, and their formation is discussed. The broad molecular weight distribution of the PBA and the difference in the polymerization behaviors from typical living radical polymerization are explained based on the results of 1H NMR and MALDI-TOF MS spectra. The hydroxyl-terminated PBA has been successfully used in the preparation of PBA-based polyurethane dispersions (PUDs. The aqueous PUDs were stable, and based on the DSC results it can be said that the miscibility of hard segments with PBA chains was improved.

Chelation in metal intoxication. VIII. Removal of chromium from organs of potassium chromate administered rats.

Science.gov (United States)

Behari, J R; Tandon, S K

1980-03-01

Some polyaminocarboxylic acids were examined for their ability to mobilize chromium from certain vital organs, their subcellular fractions, and blood cells of potassium chromate administered rats. Hexamethylene 1,6-diamino tetraacetic acid (TDTA), triethylene tetramine hexaacetic acid (TTHA), and ethylene diamine di (O-hydroxylphenyl acetic acid) (EDDHA) may be useful in preventing or reducing chromate toxicity. No definite relationship could be observed between the structure of the chelating agents and their chromium-removing capacity.

Isothermal and non-isothermal cure of a tri-functional epoxy resin (TGAP): a stochastic TMDSC study

OpenAIRE

Hutchinson, John M.; Shiravand, Fatemeh; Calventus Solé, Yolanda; Fraga Rivas, Iria

2012-01-01

The isothermal cure of a highly reactive tri-functional epoxy resin, tri-glycidyl para-amino phenol (TGAP), with diamino diphenyl sulphone (DDS), at two different cure temperatures Tc has been studied by both conventional differential scanning calorimetry (DSC) and by a stochastic temperature modulated DSC technique, TOPEM. From a series of isothermal cure experiments for increasing cure times, the glass transition temperature Tg as a function of isothermal cure time is determined by co...

Putrescine-Dependent Re-Localization of TvCP39, a Cysteine Proteinase Involved in Trichomonas vaginalis Cytotoxicity

OpenAIRE

Carvajal-Gamez, Bertha Isabel; Quintas-Granados, Laura Itzel; Arroyo, Rossana; Vázquez-Carrillo, Laura Isabel; Ramón-Luing, Lucero De los Angeles; Carrillo-Tapia, Eduardo; Alvarez-Sánchez, María Elizbeth

2014-01-01

Polyamines are involved in the regulation of some Trichomonas vaginalis virulence factors such as the transcript, proteolytic activity, and cytotoxicity of TvCP65, a cysteine proteinase (CP) involved in the trichomonal cytotoxicity. In this work, we reported the putrescine effect on TvCP39, other CP that also participate in the trichomonal cytotoxicity. Parasites treated with 1,4-diamino-2-butanone (DAB) (an inhibitor of putrescine biosynthesis), diminished the amount and proteolytic activity...

Low-Dissipation Thermosets Derived from Oligo(2,6-Dimethyl Phenylene Oxide-Containing Benzoxazines

Directory of Open Access Journals (Sweden)

Chien-Han Chen

2018-04-01

Full Text Available Poly(2,6-dimethyl phenyl oxide (PPO is known for its low dissipation factor. To achieve insulating materials with low dissipation factors for high-frequency communication applications, a telechelic oligomer-type benzoxazine (P-APPO and a main-chain type benzoxazine polymer (BPA-APPO were prepared from an amine end-capped oligo (2,6-dimethyl phenylene oxide (APPO. The APPO was prepared from a nucleophilic substitution of a phenol-end capped oligo (2,6-dimethyl phenylene oxide (a commercial product, SA 90 with fluoronitrobenzene, and followed by catalytic hydrogenation. After self-curing or curing with a dicyclopentadiene-phenol epoxy (HP 7200, thermosets with high-Tg and low-dissipation factor can be achieved. Furthermore, the resulting epoxy thermosets show better thermal and dielectric properties than those of epoxy thermoset cured from its precursor SA90, demonstrating it is a successful modification in simultaneously enhancing the thermal and dielectric properties.

Synthesis of mixed-ligand cobalt complexes and their applications in high cis-1,4-selective butadiene polymerization

KAUST Repository

Liu, Wen; Pan, Weijing; Wang, Peng; Li, Wei; Mu, Jingshan; Weng, Gengsheng; Jia, Xiaoyu; Gong, Dirong; Huang, Kuo-Wei

2015-01-01

Incomplete oxidation of (N-di-tert-butylphosphino)-6-(2-methyl-2’H-benzoimidazole)-2-aminepyridine dichlorocobalt (PN3CoCl2) in DMF results in a unique co-crystal I formed with three parts including DMF, unit A and unit B complex with Co1 and Co2, respectively, (PN3 ligand in unit A: (N-di-tert-butylphosphino)-6-(2’-methyl-2’H-benzoimidazole)-2-aminepyridine, and O=PN3 ligand in unit B: (N-di-tert-butylphosphinoxide)-6-(2’-methyl-2’H-benzoimidazole)-2-aminepyridine) with 1:1:1 molar ratio. Co1 and Co2 complexes both display a five-coordinated distorted-square-pyramidal geometry around the metal center. The Co1 center is coordinated with PN3 ligand via two N atoms from pyridine, benzoimidazole moiety as well as one P atom, and the Co2 center is coordinated with the oxidized ligandO=PN3 via two N atoms from pyridine, benzoimidazole moiety as well as one O atom from DMF molecule, while the oxidized phosphine moiety (O=P) being excluded from the coordination sphere. Activated with AlEt2Cl, the co-crystallized complexes I are able to actively convert butadiene to polybutadiene, affording cis-1,4 polybutadiene with cis-1,4 unit up to 95.5-97.8% and number average molecular weight of cal. 105g/mol. The high cis-1,4 selectivity and monomodal GPC curve of resultant polymer imply that the identical active species generated from two distinctive cobalt centers.

Synthesis of mixed-ligand cobalt complexes and their applications in high cis-1,4-selective butadiene polymerization

KAUST Repository

Liu, Wen

2015-08-03

Incomplete oxidation of (N-di-tert-butylphosphino)-6-(2-methyl-2’H-benzoimidazole)-2-aminepyridine dichlorocobalt (PN3CoCl2) in DMF results in a unique co-crystal I formed with three parts including DMF, unit A and unit B complex with Co1 and Co2, respectively, (PN3 ligand in unit A: (N-di-tert-butylphosphino)-6-(2’-methyl-2’H-benzoimidazole)-2-aminepyridine, and O=PN3 ligand in unit B: (N-di-tert-butylphosphinoxide)-6-(2’-methyl-2’H-benzoimidazole)-2-aminepyridine) with 1:1:1 molar ratio. Co1 and Co2 complexes both display a five-coordinated distorted-square-pyramidal geometry around the metal center. The Co1 center is coordinated with PN3 ligand via two N atoms from pyridine, benzoimidazole moiety as well as one P atom, and the Co2 center is coordinated with the oxidized ligandO=PN3 via two N atoms from pyridine, benzoimidazole moiety as well as one O atom from DMF molecule, while the oxidized phosphine moiety (O=P) being excluded from the coordination sphere. Activated with AlEt2Cl, the co-crystallized complexes I are able to actively convert butadiene to polybutadiene, affording cis-1,4 polybutadiene with cis-1,4 unit up to 95.5-97.8% and number average molecular weight of cal. 105g/mol. The high cis-1,4 selectivity and monomodal GPC curve of resultant polymer imply that the identical active species generated from two distinctive cobalt centers.

Kalanchosine dimalate, an anti-inflammatory salt from Kalanchoe brasiliensis.

Science.gov (United States)

Costa, Sônia Soares; de Souza, Maria de Lourdes Mendes; Ibrahim, Tereza; de Melo, Giany Oliveira; de Almeida, Ana Paula; Guette, Catherine; Férézou, Jean-Pierre; Koatz, Vera Lucia G

2006-05-01

This report describes the isolation and characterization of kalanchosine dimalate (KMC), an anti-inflammatory salt from the fresh juice of the aerial parts of Kalanchoe brasiliensis. KMC comprises the new metabolite kalanchosine (1) and malic acid (2) in a 1:2 stoichiometric ratio. Kalanchosine (1), 3,6-diamino-4,5-dihydroxyoctanedioic acid, is the first naturally occurring dimeric bis(gamma-hydroxy-beta-amino acid) and is at least partially responsible for the anti-inflammatory properties of K. brasiliensis.

Ultrasonic degradation of butadiene, styrene and their copolymers.

Science.gov (United States)

Sathiskumar, P S; Madras, Giridhar

2012-05-01

Ultrasonic degradation of commercially important polymers, styrene-butadiene (SBR) rubber, acrylonitrile-butadiene (NBR) rubber, styrene-acrylonitrile (SAN), polybutadiene rubber and polystyrene were investigated. The molecular weight distributions were measured using gel permeation chromatography (GPC). A model based on continuous distribution kinetics approach was used to study the time evolution of molecular weight distribution for these polymers during degradation. The effect of solvent properties and ultrasound intensity on the degradation of SBR rubber was investigated using different pure solvents and mixed solvents of varying volatility and different ultrasonic intensities. Copyright © 2011 Elsevier B.V. All rights reserved.

Estudo da decomposição térmica de propelente sólido compósito de baixa emissão de fumaça Study of thermal decomposition of a smokelles propellant

Directory of Open Access Journals (Sweden)

Jony Andrade

2008-01-01

Full Text Available The thermal decomposition of hydroxyl-terminated polybutadiene (HTPB/ammonium nitrate (AN based propellants, so called smokeless formulations, and raw materials were investigated by differential scanning calorimetry (DSC and thermogravimetry (TG. The thermoanalytical profile of different components and of propellant were evaluated and the Arrhenius parameters for the thermal decomposition of the propellant sample were determined by the Ozawa method. The kinetic parameters of the thermal decomposition of propellant samples were determined by DSC measurements. The values obtained for activation energy (Ea and pre-exponential factor were 163 kJ mol-1 and 1.94x10(6 min-1.

Desenvolvimento de tecnologia de pré-polímeros na síntese de poliuretanos empregados em combustíveis sólidos

Directory of Open Access Journals (Sweden)

Marcelo Clemente

2014-07-01

Full Text Available The aim of this work was to synthesize a polyurethane polymer matrix using polyols as a raw material to obtain a binder such as the hydroxyl terminated polybutadiene (HTPB pre-polymer in energetic material formulation. The soybean-based polyol was the best starting raw material for producing a binder for solid fuel formulation in rocket motor applications. Characterization of the obtained soybean-based polyurethane binder was carried out by employing FT-IR analysis and thermo analytical techniques that showed similar HTPB binder thermo decomposition behaviors, confirming their potential for use as polymer matrix composites.

Preparation and Characterization of Fluorinated Hydrophobic UV-Crosslinkable Thiol-Ene Polyurethane Coatings

Directory of Open Access Journals (Sweden)

Wenjing Xia

2017-08-01

Full Text Available The polyurethane prepolymer terminated with a double bond was synthesized using isophorone diisocyanate (IPDI, hydroxyl terminated polybutadiene (HTPB, 1,4-butanediol (BDO, and 2-hydroxyethyl acrylate (HEA. Then, a series of innovative UV-curable polyurethane coatings were prepared by blending ene-terminated polyurethane, fluoroacrylate monomer, and multifunctional thiol crosslinker upon UV exposure. The incorporation of fluoroacrylate monomer and multifunctional thiols into polyurethane coatings significantly enhanced the hydrophobic property, mechanical property, pencil hardness, and glossiness of the polyurethane coatings. This method of preparing UV crosslinkable, hydrophobic polyurethane coatings based on thiol-ene chemistry exhibited numerous advantages over other UV photocuring systems.

Proposing alerts for pre and pro-haptens (QSAR2016) ...

Science.gov (United States)

Predictive testing to identify and characterise substances for their skin sensitisation potential has historically been based on animal tests such as the Local Lymph Node Assay (LLNA). In recent years, regulations in the cosmetics and chemicals sectors has provided a strong impetus to develop and evaluate non-animal alternative methods. The 3 test methods that have undergone extensive development and validation are the direct peptide reactivity assay (DPRA), the KeratinoSensTM and the human Cell Line Activation Test (h-CLAT). Whilst these methods have been shown to perform relatively well in predicting LLNA results (accuracy ~ 80%), a particular concern that has been raised is their ability to predict chemicals that need to be activated to act as sensitisers (either abiotically on the skin (pre-hapten) or metabolically in the skin (pro-hapten)). This study reviewed an EURL ECVAM dataset containing 271 substances for which information was available in the LLNA and for one or more of the three non-animal test methods. The chemical structures of the substances were inspected and each assigned to a reaction mechanistic domain. Fifty-three substances were expected to require activation. Plausible reaction pathways were considered for each of the substances from which three structural alerts were hypothesised: autoxidation to hydroperoxides, aromatic ortho and para-diamino or di phenol derivatives, and aromatic meta-diamino/hydroxy derivatives. For each alert, the av

Study of Chemical Intermediates by Means of ATR-IR Spectroscopy and Hybrid Hard- and Soft-Modelling Multivariate Curve Resolution-Alternating Least Squares

Directory of Open Access Journals (Sweden)

Junxiu Ma

2017-01-01

Full Text Available 3,5-Diamino-1,2,4-triazole (DAT became a significant energetic materials intermediate, and the study of its reaction mechanism has fundamental significance in chemistry. The aim of this study is to investigate the ability of online attenuated total reflection infrared (ATR-IR spectroscopy combined with the novel approach of hybrid hard- and soft-modelling multivariate curve resolution-alternating least squares (HS-MCR analysis to monitor and detect changes in structural properties of compound during 3,5-diamino-1,2,4-triazole (DAT synthesis processes. The subspace comparison method (SCM was used to obtain the principal components number, and then the pure IR spectra of each substance were obtained by independent component analysis (ICA and HS-MCR. The extent of rotation ambiguity was estimated from the band boundaries of feasible solutions calculated using the MCR-BANDS procedure. There were five principal components including two intermediates in the process in the results. The reaction rate constants of DAT formation reaction were also obtained by HS-MCR. HS-MCR was used to analyze spectroscopy data in chemical synthesis process, which not only increase the information domain but also reduce the ambiguities of the obtained results. This study provides the theoretical basis for the optimization of synthesis process and technology of energetic materials and provides a strong technical support of research and development of energy material with extraordinary damage effects.

Study of Chemical Intermediates by Means of ATR-IR Spectroscopy and Hybrid Hard- and Soft-Modelling Multivariate Curve Resolution-Alternating Least Squares.

Science.gov (United States)

Ma, Junxiu; Qi, Juan; Gao, Xinyu; Yan, Chunhua; Zhang, Tianlong; Tang, Hongsheng; Li, Hua

2017-01-01

3,5-Diamino-1,2,4-triazole (DAT) became a significant energetic materials intermediate, and the study of its reaction mechanism has fundamental significance in chemistry. The aim of this study is to investigate the ability of online attenuated total reflection infrared (ATR-IR) spectroscopy combined with the novel approach of hybrid hard- and soft-modelling multivariate curve resolution-alternating least squares (HS-MCR) analysis to monitor and detect changes in structural properties of compound during 3,5-diamino-1,2,4-triazole (DAT) synthesis processes. The subspace comparison method (SCM) was used to obtain the principal components number, and then the pure IR spectra of each substance were obtained by independent component analysis (ICA) and HS-MCR. The extent of rotation ambiguity was estimated from the band boundaries of feasible solutions calculated using the MCR-BANDS procedure. There were five principal components including two intermediates in the process in the results. The reaction rate constants of DAT formation reaction were also obtained by HS-MCR. HS-MCR was used to analyze spectroscopy data in chemical synthesis process, which not only increase the information domain but also reduce the ambiguities of the obtained results. This study provides the theoretical basis for the optimization of synthesis process and technology of energetic materials and provides a strong technical support of research and development of energy material with extraordinary damage effects.

Thickness-Dependent Order-to-Order Transitions of Bolaform-like Giant Surfactant in Thin Films

Energy Technology Data Exchange (ETDEWEB)

Hsu, Chih-Hao; Yue, Kan; Wang, Jing; Dong, Xue-Hui; Xia, Yanfeng; Jiang, Zhang [X-ray; Thomas, Edwin L. [Department; Cheng, Stephen Z. D.

2017-09-07

Controlling self-assembled nanostructures in thin films allows the bottom-up fabrication of ordered nanoscale patterns. Here we report the unique thickness-dependent phase behavior in thin films of a bolaform-like giant surfactant, which consists of butyl- and hydroxyl-functionalized polyhedral oligomeric silsesquioxane (BPOSS and DPOSS) cages telechelically located at the chain ends of a polystyrene (PS) chain with 28 repeating monomers on average. In the bulk, BPOSS-PS28-DPOSS forms a double gyroid (DG) phase. Both grazing incidence small angle X-ray scattering and transmission electron microscopy techniques are combined to elucidate the thin film structures. Interestingly, films with thicknesses thinner than 200 nm exhibit an irreversible phase transition from hexagonal perforated layer (HPL) to compressed hexagonally packed cylinders (c-HEX) at 130 °C, while films with thickness larger than 200 nm show an irreversible transition from HPL to DG at 200 °C. The thickness-controlled transition pathway suggests possibilities to obtain diverse patterns via thin film self-assembly.

Magnetic-Responsive Microparticles that Switch Shape at 37 °C

Directory of Open Access Journals (Sweden)

Koichiro Uto

2017-11-01

Full Text Available Shape-memory polymers have seen tremendous research efforts driven by the need for better drug carries and biomedical devices. In contrast to these advancements, fabrication of shape-memory particles which actuate at body temperature remains scarce. We developed a shape-memory microparticle system with dynamically tunable shapes under physiological temperature. Temperature-responsive poly(ε-caprolactone (PCL microparticles were successfully prepared by an in situ oil-in-water (o/w emulsion polymerization technique using linear telechelic and tetra-branched PCL macromonomers. By optimizing the mixing ratios of branched PCL macromonomers, the crystal-amorphous transition temperature was adjusted to the biological relevant temperature. The particles with a disk-like temporal shape were achieved by compression. The shape recovery from the disk to spherical shape was also realized at 37 °C. We also incorporated magnetic nanoparticles within the PCL microparticles, which can be remote-controllable by a magnet, in such a way that they can be actuated and manipulated in a controlled way.

Efficient Homodifunctional Bimolecular Ring-Closure Method for Cyclic Polymers by Combining RAFT and Self-Accelerating Click Reaction.

Science.gov (United States)

Qu, Lin; Sun, Peng; Wu, Ying; Zhang, Ke; Liu, Zhengping

2017-08-01

An efficient metal-free homodifunctional bimolecular ring-closure method is developed for the formation of cyclic polymers by combining reversible addition-fragmentation chain transfer (RAFT) polymerization and self-accelerating click reaction. In this approach, α,ω-homodifunctional linear polymers with azide terminals are prepared by RAFT polymerization and postmodification of polymer chain end groups. By virtue of sym-dibenzo-1,5-cyclooctadiene-3,7-diyne (DBA) as small linkers, well-defined cyclic polymers are then prepared using the self-accelerating double strain-promoted azide-alkyne click (DSPAAC) reaction to ring-close the azide end-functionalized homodifunctional linear polymer precursors. Due to the self-accelerating property of DSPAAC ring-closing reaction, this novel method eliminates the requirement of equimolar amounts of telechelic polymers and small linkers in traditional bimolecular ring-closure methods. It facilitates this method to efficiently and conveniently produce varied pure cyclic polymers by employing an excess molar amount of DBA small linkers. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

2,3-Diamino?pyridinium 6-carb?oxy?pyridine-2-carboxyl?ate

OpenAIRE

Foroughian, Mahsa; Foroumadi, Alireza; Notash, Behrouz; Bruno, Giuseppe; Amiri Rudbari, Hadi; Aghabozorg, Hossein

2011-01-01

The asymmetric unit of the title proton-transfer compound, C5H8N3+·C7H4NO4−, consists of one mono-deprotonated pyridine-2,6-dicarboxylic acid as anion and one protonated 2,3-diaminopyridine as cation. The crystal packing shows extensive O—H...O, N—H...O and N—H...N hydrogen bonds. Thre are also several π–π interactions between the anions and also between the cations [centriod–centroid distances = 3.6634&...

Core microstructure, morphology and chain arrangement of block copolymer self-assemblies as investigated by thermal field-flow fractionation.

Science.gov (United States)

Muza, U L; Greyling, G; Pasch, H

2018-05-28

The self-assembly of block copolymers (BCPs), as a result of solvent selectivity for one block, has recently received significant attention due to novel applications of BCPs in pharmaceuticals, biomedicine, cosmetics, electronics and nanotechnology. The correlation of BCP microstructure and the structure of the resulting self-assemblies requires advanced analytical methods. However, traditional bulk characterization techniques are limited in the quest of providing detailed information regarding molar mass (M w ), hydrodynamic size (D h ), chemical composition, and morphology for these self-assemblies. In the present study, thermal field-flow fractionation (ThFFF) is utilised to investigate the impact of core microstructure on the resultant solution properties of vesicles prepared from polystyrene-polybutadiene block copolymers (PS-b-PBd) with 1.2- and 1.4-polybutadiene blocks, respectively. As compared to investigations on the impact of the corona microstructure, the impact of core microstructure on micellar properties has largely been neglected in previous work. In N,N-dimethylacetamide (DMAc) these BCPs form vesicles having PS shells and PBd cores. D h , M w , aggregation number, and critical micelle concentration of these micelles are shown to be sensitive to the core microstructure, therefore, demonstrating the potential of microstructural differences to be used for providing tuneable pathways to specific self-assemblies. It is shown that micelles prepared from BCPs of similar PS and PBd block sizes are successfully separated by ThFFF. It is further demonstrated in this study that PS-b-PBd vesicles and PS homopolymers of identical surface chemistry (PS) and comparable D h in DMAc, can be separated by ThFFF. Copyright © 2018. Published by Elsevier B.V.

Modified hydrogenated PBLH copolymer synthesis with styrene for proton exchange membranes fuel cell application

International Nuclear Information System (INIS)

Ferraz, Fernando A.; Oliveira, Angelo R.S.; Rodrigues, Maraiza F.; Groetzner, Mariana B.; Cesar-Oliveira, Maria Aparecida F.; Cantao, Mauricio P.

2005-01-01

Polymers used as electrolyte in fuel cells are expected to have functional groups in their structure which are responsible for proton conductivity. Since the use of hydroxylated liquid polybutadiene (PBLH) has not been mentioned in the literature as an ion exchange membrane for fuel cell application (PEMFC), and its structure can be modified for a later sulfonation, it has been studied. In this work, PBLH was modified through a hydrogenation reaction. Furthermore, hydrogenated polymeric esters were obtained by esterification and transesterification reactions (PBLH- estearate and PBLH- methacrylate). Reacting the PBLH methacrylate with styrene, it was generated a copolymer with appropriated structure for sulfonation, justifying researches for fuel cell. (author)

Síntese de poliuretanos modificados por óleo de mamona empregados em materiais energéticos

Directory of Open Access Journals (Sweden)

Roberta Jachura Rocha

2013-01-01

Full Text Available The aim of this work was to synthesize a polyurethane polymer matrix using castor oil as a polymer chain modifier, whose characteristics can be adjusted for use as a binder in the manufacture of energetic materials such as propellant and pyrotechnics for aerospace use. We attempted the partial substitution of hydroxyl-terminated polybutadiene (HTPB, a pre-polymer commonly used as a starting polyol in obtaining energetic matrix composites. Thermoanalytical techniques were employed to characterize the material based on castor oil and the unmodified HTPB. The results showed similar behaviors, confirming the possibility of their use as polymer matrix composites through the proposed adaptations.

Effect of high-energy radiation on the rheological characteristics and structure of liquid rubbers

International Nuclear Information System (INIS)

Govorkov, A.T.; Zaitseva, V.I.; Muryshkin, D.L.; Safonov, Yu.N.

1987-01-01

The effect of high-energy radiation (γ-radiation and accelerated electrons) on liquid polybutadiene and polyisoprene rubbers (SKD, SKD-KTR, SKN) and butyl rubber (BR) was studied by IR and EPR spectroscopy, rheoviscosimetry, and chemical analysis. Newtonian flow was conserved in the rubbers under irradiation. The activation energy of viscous flow was unchanged, evidence of an increase in the contour length of the macromolecules without significant branching and cross-linking at the initial stages of the irradiation. A quantitative relationship was established between the rubber's dynamic viscosity and the absorbed dose, and features of the structure-formation mechanism in the liquid rubbers were determined

Calculation for Primary Combustion Characteristics of Boron-Based Fuel-Rich Propellant Based on BP Neural Network

Directory of Open Access Journals (Sweden)

Wu Wan'e

2012-01-01

Full Text Available A practical scheme for selecting characterization parameters of boron-based fuel-rich propellant formulation was put forward; a calculation model for primary combustion characteristics of boron-based fuel-rich propellant based on backpropagation neural network was established, validated, and then was used to predict primary combustion characteristics of boron-based fuel-rich propellant. The results show that the calculation error of burning rate is less than ±7.3%; in the formulation range (hydroxyl-terminated polybutadiene 28%–32%, ammonium perchlorate 30%–35%, magnalium alloy 4%–8%, catocene 0%–5%, and boron 30%, the variation of the calculation data is consistent with the experimental results.

How preparation and modification parameters affect PB-PEO polymersome properties in aqueous solution

DEFF Research Database (Denmark)

Habel, Joachim Erich Otto; Ogbonna, Anayo; Larsen, Nanna

2016-01-01

polybutadiene-polyethylene oxide diblock copolymers: detergent-mediated film rehydration (DFR) and solvent evaporation (SE). DFR-prepared polymersomes showed a three times higher permeability compared to SE-prepared polymersomes as revealed by stopped-flow light scattering. SE-prepared polymersomes broke down......), a detergent typically used for reconstitution of membrane proteins into lipid bilayers. Specifically, we compared dialysis and biobeads for OG removal to investigate the influence of these methods on bilayer conformation and polymer rearrangement following detergent removal. There was no significant...... difference found between method, temperature, or time within each method. Our findings provide insight on how biocompatible polymersome production affects the physical properties of the resulting polymersomes....

15N NMR investigation of the covalent binding of reduced TNT amines to soil humic acid, model compounds, and lignocellulose

Science.gov (United States)

Thorn, K.A.; Kennedy, K.R.

2002-01-01

The five major reductive degradation products of TNT-4ADNT (4-amino-2,6-dinitrotoluene), 2ADNT (2-amino-4,6-dinitrotoluene), 2,4DANT (2,4-diamino-6-nitrotoluene), 2,6DANT (2,6-diamino-4-nitrotoluene), and TAT (2,4,6-triaminotoluene)-labeled with 15N in the amine positions, were reacted with the IHSS soil humic acid and analyzed by 15N NMR spectrometry. In the absence of catalysts, all five amines underwent nucleophilic addition reactions with quinone and other carbonyl groups in the soil humic acid to form both heterocyclic and nonheterocyclic condensation products. Imine formation via 1,2-addition of the amines to quinone groups in the soil humic acid was significant with the diamines and TAT but not the monoamines. Horseradish peroxidase (HRP) catalyzed an increase in the incorporation of all five amines into the humic acid. In the case of the diamines and TAT, HRP also shifted the binding away from heterocyclic condensation product toward imine formation. A comparison of quantitative liquid phase with solid-state CP/MAS 15N NMR indicated that the CP experiment underestimated imine and heterocyclic nitrogens in humic acid, even with contact times optimal for observation of these nitrogens. Covalent binding of the mono- and diamines to 4-methylcatechol, the HRP catalyzed condensation of 4ADNT and 2,4DANT to coniferyl alcohol, and the binding of 2,4DANT to lignocellulose with and without birnessite were also examined.

Initial characterization of receptors for molecules that induce the settlement and metamorphosis of Haliotis rufescens larvae

International Nuclear Information System (INIS)

Trapido-Rosenthal, H.G.

1985-01-01

Larvae of the marine gastropod mollusc Haliotis refescens are induced to undergo metamorphosis by γ-aminobutyric acid (GABA) and stereochemically related compounds. The most potent of these inducers is (-)-β-(parachlorophenyl)-GABA (baclofen). The inductive response exhibits positive cooperatively, and is subject to both facilitation (up-regulation) and habituation (down-regulation). Facilitation is brought about by diamino acids such as L-diaminopropionic acid (L-DAPA), and is characterized by decreased Hill coefficients (n/sub H/) and concentration requirements (EC 50 ) for inducers. Facilitation does not require the simultaneous presence of facilitating and inducing compounds, and the facilitated state is persistent. Larvae are capable of being up-regulated 2 days before they are capable of undergoing settlement and metamorphosis. Habituation can be brought about by exposure of pre-competent larvae to GABA 4 days prior to the attainment of competence; it is then slowly reversible. Larvae specifically bind tritiated (-)-baclofen in a manner that is saturable with both increasing time of exposure of larvae to, and with increasing concentration of, this compound. Specific binding can be competed for by unlabeled GABA-mimetic inducing molecules; the order of effectiveness of these molecules as competitors for specific binding correlates well with their effectiveness as inducers of metamorphosis. Facilitation of larvae by exposure to diamino acids does not alter their specific binding of tritiated (-)-baclofen. It is concluded from these findings that Haliotis larvae possess receptors for GABA-mimetic compounds

Chemical and toxicological characterization of slurry reactor biotreatment of explosives-contaminated soils

Energy Technology Data Exchange (ETDEWEB)

Griest, W.H.; Stewart, A.J.; Vass, A.A.; Ho, C.H.

1998-08-01

Treatment of 2,4,6-trinitrotoluene (TNT)-contaminated soil in the Joliet Army Ammunition Plant (JAAP) soil slurry bioreactor (SSBR) eliminated detectable TNT but left trace levels of residual monoamino and diamino metabolites under some reactor operating conditions. The reduction of solvent-extractable bacterial mutagenicity in the TNT-contaminated soil was substantial and was similar to that achieved by static pile composts at the Umatilla Army Depot Activity (UMDA) field demonstration. Aquatic toxicity to Ceriodaphnia dubia from TNT in the leachates of TNT-contaminated soil was eliminated in the leachates of JAAP SSBR product soil. The toxicity of soil product leachates to Ceriodaphnia dubia was reasonably predicted using the specific toxicities of the components detected, weighted by their leachate concentrations. In samples where TNT metabolites were observed in the soil product and its leachates, this method determined that the contribution to predicted toxicity values was dominated by trace amounts of the diamino-metabolites, which are very toxic to ceriodaphnia dubia. When the SSBR operating conditions reduced the concentrations of TNT metabolites in the product soils and their leachates to undetectable concentrations, the main contributors to predicted aquatic toxicity values appeared to be molasses residues, potassium, and bicarbonate. Potassium and bicarbonate are beneficial or benign to the environment, and molasses residues are substantially degraded in the environment. Exotoxins, pathogenic bacteria, inorganic particles, ammonia, and dissolved metals did not appear to be important to soil product toxicity.

Lyophilized kits of diamino dithiol compounds for labelling with {sup 99m}-technetium. Pharmacokinetics studies and distribution compartmental models of the related complexes; Conjuntos de reativos liofilizados de compostos diaminoditiolicos para marcacao com tecnecio-99m. Estudo farmacocinetico e elaboracao de modelos compartimentalizados dos respectivos complexos

Energy Technology Data Exchange (ETDEWEB)

Araujo, Elaine Bortoleti de

1995-07-01

The present work reflects the clinical interest for labelling diamino dithiol compounds with technetium-99m. Both chosen compounds, L,L-Ethylene dicysteine (L,L-EC) and L,L-Ethylene dicysteine diethyl esther (L,L-ECD) were obtained with relative good yield and characterized by IR and NMR. The study of labelling conditions with technetium-99m showed the influence of the type and mass of reducing agent as well as the pH on the formation of complexes with desired biological characteristics. Radiochemical purity was determined by thin layer chromatography (TLC) and high performance liquid chromatography (HPLC). Lyophilised kits of L,L-EC and L,L-ECD for labelling with {sup 99m}Tc were obtained, with stability superior to 120 days, when stored under refrigeration, enabling the kits marketing. The ideal formulation of the kits as well as the use of liquid nitrogen in the freezing process, determined the lyophilization success. Distribution biological studies of the {sup 99m}Tc complexes were performed on mice by invasive method and on bigger animals by scintigraphic evaluation. Biological distribution studies of the complex {sup 99m}Tc-L,L-EC showed fast blood clearance, with the elimination of about 90% of the administered dose after 60 minutes, almost exclusively by the urinary system. The biological distribution results were adjusted to a three compartmental distribution model, as expected for a radiopharmaceutical designed to renal dynamic studies, with tubular elimination. The complex interaction with renal tubular receptors is related with structural characteristics of the compound, more specifically with the presence and location of polar groups. In comparison with {sup 99m}Tc-L,L-EC, biological studies of the complex {sup 99m}Tc -L,L-ECD showed different distribution aspects, despite some structural similarities. The presence of ethyl groups confers to the complex neutrality and lipophilicity. It cross the intact blood brain barrier and is retained in the brain

Synthesis of edatrexate (2-13C-glutamate)

International Nuclear Information System (INIS)

DeGraw, J.I.; Colwell, W.T.; Jue, Thomas

1997-01-01

The experimental antitumor drug Edatrexate, labeled with 99% 13 C at the 2-position of the glutamate acid group was required for 13 C-magnetic resonance spectroscopy studies in biological media. Coupling of 2,4-diamino-4-deoxy-10-ethyl-10-deazapteroic acid with diethyl L-2- 13 C-glutamate as promoted by BOP reagent afforded Edatrexate (2- 13 C-glu) diethyl ester in 60% yield following purification by column chromatography. Saponification by aqueous NaOH in 2-methoxyethanol gave the target molecule in 44% yield or 26% overall. (author)

The effect of glycine replacement with flexible ω-amino acids on the antimicrobial and haemolytic activity of an amphipathic cyclic heptapeptide

DEFF Research Database (Denmark)

Oddo, Alberto; Nyberg, Nils; Frimodt-Møller, Niels

2015-01-01

residue with a variety of flexible residues (i.e. ω-amino and α,ω-diamino acids). The resulting library has been tested for antimicrobial activity against a wide range of clinically relevant pathogens as well as for toxicity to red blood cells. Circular dichroism and molecular modelling have been used...... to study changes in conformation. Increments as high as 16-fold in antimicrobial activity (as effective as lipidation) and >2-fold in haemolytic EC50 values were observed. Interestingly, secondary structures can be stabilized by increasing, rather than decreasing, ring flexibility....

A GALA lipopeptide mediates pH- and membrane charge dependent fusion with stable giant unilamellar vesicles

DEFF Research Database (Denmark)

Etzerodt, Thomas P.; Trier, Sofie; Henriksen, Jonas R.

2012-01-01

sporadic and there is a strong need to characterize and increase our understanding of the membrane fusion properties of these peptides. Many fusion studies have focused on the ability of free peptides in solution that mediate fusion between liposomes. For drug delivery purposes it is a necessity to attach......,2-diamino propanoic acid (Dap) moiety, yielding the lipopeptide dimyristoyl-Dap-GALA (DMDGALA). We have investigated DMDGALA as a component in large unilamellar vesicles (LUVs) and demonstrate pH-triggered fusion of peptide containing LUVs with stable target giant unilamellar vesicles (GUVs), which were...

Antiradiation compounds XV: condensations of carbon disulfide with amino, chloro, cyanomethyl, and sulfonamido heterocycles

International Nuclear Information System (INIS)

Foye, W.O.; Kauffman, J.M.; Lanzillo, J.J.; LaSala, E.F.

1975-01-01

Condensations of carbon disulfide were carried out with amino, chloro, and diamino heterocycles to give condensed ring thiazoline-2-thiones and imidazoline-2-thiones, with cyanomethyl heterocycles to give dithio acid derivatives, and with heterocyclic sulfonamides to give sulfonyldithiocarbamates. Of several examples tested, pyrido[3,2-d]thiazoline-2-thione, disodium 2-(5-chloro-2-thienyl)-3,3-dimercaptoacrylonitrile, triethylammonium 4-sulfamoylphenyldithiocarbamate, ammonium β-phenethyldithiocarbamate, and methyl N-(thiophene-2-sulfonyl)dithiocarbamate, only the last-named compound showed any radiation protection for mice. Several compounds gave negative tests for antimalarial activity

Cockayne Syndrome group B protein stimulates NEIL2 DNA glycosylase activity

DEFF Research Database (Denmark)

Aamann, Maria Diget; Hvitby, Christina Poulsen; Popuri, Venkateswarlu

2014-01-01

Cockayne Syndrome is a segmental premature aging syndrome, which can be caused by loss of function of the CSB protein. CSB is essential for genome maintenance and has numerous interaction partners with established roles in different DNA repair pathways including transcription coupled nucleotide...... activity on a 5-hydroxyl uracil lesion in a DNA bubble structure substrate in vitro. A novel 4,6-diamino-5-formamidopyrimidine (FapyA) specific incision activity of NEIL2 was also stimulated by CSB. To further elucidate the biological role of the interaction, immunofluorescence studies were performed...

In situ identification of polyphosphate- and polyhydroxyalkanoate-accumulating traits for microbial populations in a biological phosphorus removal process

DEFF Research Database (Denmark)

Liu, W.-T.; Nielsen, Alex Toftgaard; Wu, JH

2001-01-01

, electron microscopy with energy-dispersive X-ray analysis was used to validate the staining specificity of 4,6-diamino-2-phenylindole (DAPI) for intracellular polyphosphate and revealed the composition of polyphosphate granules accumulated in predominant bacteria as mostly P, Ca and Na. As a result, DAPI......, one novel rod-shaped group, closely related to coccus-shaped Tetrasphaera, and one filamentous group resembling Candidatus Nostocoidia limicola in the HGC group were found to accumulate polyphosphate but not PHA, No cellular inclusions were detected in most members of the alpha -Proteobacteria...

Formation of a Six-Coordinate fac-[Re(Co)3]+ Complex by the N-C bond cleavage of a potentially tetradentate ligand

International Nuclear Information System (INIS)

Booysen, I.; Gerber, T. I. A.; Hosten, E.; Mayer, P.

2008-01-01

The rhenium(I) compound fac-[Re(CO) 3 (daa)]. Hpab.H 2 O (Hpab N,N'-(l,2-phenylene)bis(2'-aminobenzamide); Hdaa 2-amino-N-(2-aminophenyl)benzamide) was synthesized from the reaction of [Re(CO) 5 ,Br] with two equivalent of Hpab in toluene. The monoanionic tridentate ligand daa was formed by the rhenium-mediated cleavage of an amido N-C bond of the potentially tetradentate ligand Hpab. The compound was characterized by IR spectroscopy and X-ray crystallography, and daa is coordinated as a diamino amide via three nitrogen-donor atoms

Metallothionein Abrogates GTP Cyclohydrolase I inhibition-Induced Cardiac Contractile and Morphological Defect: Role of Mitochondrial Biogenesis

OpenAIRE

Ceylan-Isik, Asli F.; Guo, Kelly K.; Carlson, Edward C.; Privratsky, Jamie R.; Liao, Song-Jie; Cai, Lu; Chen, Alex F.; Ren, Jun

2009-01-01

One key mechanism for endothelial dysfunction is eNOS uncoupling, whereby eNOS generates O2•− rather than NO, due to deficient eNOS cofactor tetrahydrobiopterin (BH4). This study was designed to examine the effect of BH4 deficiency on cardiac morphology and function as well as the impact of metallothionein (MT) on BH4 deficiency-induced abnormalities, if any. FVB and cardiac-specific MT transgenic mice were exposed to 2,4-diamino-6-hydroxy-pyrimidine (DAHP, 10 mmol/l, 3 wks), an inhibitor of ...

Radiation-induced polymerization of 1, 3-butadiene in urea canal complex as studied by broad line NMR

International Nuclear Information System (INIS)

Yoshii, Fumio; Hayakawa, Naohiro; Abe, Toshihiko

1975-01-01

Dependence of the NMR spectrum on the molar ratio of 1,3-butadiene to urea, temperature dependence of the spectrum and changes of the spectrum during polymerization were observed. The results were discussed in comparison with previously reported results for the canal polymerization of acrylonitrile and vinyl chloride. 1,3-butadiene formes a canal complex with the molar ratio of 1 to 4 for 1,3-butadiene to urea. The urea canal complex is decomposed at -15 0 C. The spectrum of 1,3-butadiene in urea canal complex shows existence of a remarkably mobile component which was not observed on the spectra of acrylonitrile - urea of vinyl chloride - urea canal complex. The line width of 1,3-butadiene in the urea canal complex except the very narrow component was broader than that for vinyl chloride in the urea canal complex over an observed temperature range. The line width of urea formed the canal decreases at lower temperature than those of urea in vinyl chloride - urea canal complex. The post-polymerization of 1,3-butadiene in the urea canal complex started clearly from -78 0 C and completes when the temperature was raised to 20 0 C. The polymerization will be proceeded by the such way that monomer molecules move to the active center in the canal, as considered in the case of the polymerization of acrylonitrile and vinyl chloride in the canal complex. The crystal structure of the urea canal was maintained during polymerization and than the polybutadiene - urea canal complex was necessarily formed after the polymerization. The formation of the polymer - urea canal complex has distinct difference between 1,3-butadiene and acrylonitrile or vinyl chloride. For acrylonitrile and vinyl chloride the canals around the polymer formed are destroyed. The structure of polybutadiene - urea canal complex was hexagonal having a=8.21, c=10.50 A. (auth.)

Synthesis of the Markov model of the thermochemical degradation of a polymer in solution

Directory of Open Access Journals (Sweden)

V. K. Bityukov

2017-01-01

Full Text Available The paper deals with the problem of mathematical modeling of thermochemical destruction process. The apparatus of Markov's chains is used to synthesize a mathematical model. The authors of the study suggest to consider the destruction process as a random one, where the system state changes, which is characterized by the proportion of macromolecules in each fraction of the molecular- and weight distribution. The intensities of transitions from one state to another characterize the corresponding rates of destruction processes for each fraction of the molecular- and weight distribution. The processes of crosslinking and polymerization in this work were neglected, and it was accepted that there is a probability of transition from any state with a lower order index (corresponding to fractions with higher molecular weights to any state with a higher index (corresponding to fractions with lower molecular weights. Markov's chain with discrete states and continuous time was taken as the mathematical model basis. Interactive graphical simulation environment MathWorksSimulink was used as a simulation environment. Experimental studies of polybutadiene destruction in solution were carried out to evaluate the mathematical model parameters. The GPC (gel-penetration chromatography data of the polybutadiene solution were used as the initial (starting data for estimating the polymer WMD (molecular weight distribution. Mean-square deviation of the calculated data from the experimental data for each fraction and at specified times was minimized for the numerical search of parameter values. The results of comparison of experimental and calculated on mathematical model data showed an error of calculations on the average about 5%, which indicates an acceptable error in estimating of polymer fractions proportions change during the process of destruction for the process under consideration and conditions.

SYNTHESIS OF HYDROXY-TELECHELIC POLY(METHYL ACRYLATE) AND POLYSTYRENE BY ATOM TRANSFER RADICAL COUPLING. (R829580)

Science.gov (United States)

The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

Experimental and Theoretical Study of 1.5-Diamino-4-H-Tetrazolium Perchlorate

National Research Council Canada - National Science Library

Drake, Greg

2004-01-01

... out. Experimental evidence strongly supports the protonation of a nitrogen atom of the tetrazole ring, including the structure observed in a single crystal x-ray diffraction study of the title compound...

Polyurethane curing kinetics for polymer bonded explosives: HTPB/IPDI binder

Energy Technology Data Exchange (ETDEWEB)

Lee, Sangmook; Hong, In-Kwon [Dankook University, Yongin (Korea, Republic of); Choi, Chong Han; Lee, Jae Wook [Sogang University, Seoul (Korea, Republic of)

2015-08-15

The kinetics of polyurethane reaction and the effect of catalysts on the curing behavior were studied. The mixtures of hydroxyl terminated polybutadiene and isophorone diisocyanate with different reaction catalysts were dynamically cured in a differential scanning calorimeter. The activation energies were evaluated by the Kissinger and the Ozawa methods. The Chang plot was also used to determine reaction order and rate constant. The results showed that the activation energies were influenced remarkably by the choice of catalysts. The degree of cure and the cure time at given temperatures were calculated by direct integration of modified auto-catalytic kinetic model. It would give valuable information like pot-life estimation during manufacturing polymer-bonded explosives.

Ultrathin epidermal strain sensor based on an elastomer nanosheet with an inkjet-printed conductive polymer

Science.gov (United States)

Tetsu, Yuma; Yamagishi, Kento; Kato, Akira; Matsumoto, Yuya; Tsukune, Mariko; Kobayashi, Yo; Fujie, Masakatsu G.; Takeoka, Shinji; Fujie, Toshinori

2017-08-01

To minimize the interference that skin-contact strain sensors cause natural skin deformation, physical conformability to the epidermal structure is critical. Here, we developed an ultrathin strain sensor made from poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) inkjet-printed on a polystyrene-polybutadiene-polystyrene (SBS) nanosheet. The sensor, whose total thickness and gauge factor were ˜1 µm and 0.73 ± 0.10, respectively, deeply conformed to the epidermal structure and successfully detected the small skin strain (˜2%) while interfering minimally with the natural deformation of the skin. Such an epidermal strain sensor will open a new avenue for precisely detecting the motion of human skin and artificial soft-robotic skin.

Effects of SBS Configuration on Performance of High Modulus Bitumen Based on Dynamic Mechanical Analysis

Directory of Open Access Journals (Sweden)

Ming Liang

2016-07-01

Full Text Available High modulus bitumens modified by polystyrene-block-polybutadiene-block-polystyrene (SBS with different molecular structure were investigated on dynamic shear rheometer and fluorescence microscopy to evaluate viscoelastic properties and morphology of binders. The results shows that storage modulus (G’ is obviously less than loss modulus (G”, which means viscous behaviour of bitumen is dominant, and anti-rutting factor (G* ⁄ sin δ is markedly enhanced by star SBS than by linear SBS. The morphology indicated that star SBS improved the softening point more obviously, tending to form a cross-linked network in bitumen. As for linear SBS, it is dispersed in bitumen in the form of globules and enhances the ductility of binder.

Synthesis and degradation kinetics of a novel polyester containing bithiazole rings

Energy Technology Data Exchange (ETDEWEB)

He, W., E-mail: hwdut2003@yahoo.com [Research Center of Plastic Engineering, Shenyang University of Chemical Technology, Shenyang 110142 (China); State Key Laboratory of Robotics (China); Department of Chemistry, University of the Free State (Qwaqwa Campus), Private Bag X13, Phuthaditjhaba 9866 (South Africa); Jiang, Y.Y. [Research Center of Plastic Engineering, Shenyang University of Chemical Technology, Shenyang 110142 (China); State Key Laboratory of Robotics (China); Luyt, A.S. [Department of Chemistry, University of the Free State (Qwaqwa Campus), Private Bag X13, Phuthaditjhaba 9866 (South Africa); Ocaya, R.O. [Department of Physics, University of the Free State (Qwaqwa Campus), Private Bag X13, Phuthaditjhaba 9866 (South Africa); Ge, T.J. [Research Center of Plastic Engineering, Shenyang University of Chemical Technology, Shenyang 110142 (China); State Key Laboratory of Robotics (China)

2011-10-20

Highlights: {yields} A novel Schiff base type polyester was synthesized and characterized by FTIR spectroscopy, elemental analysis, and X-ray diffraction spectroscopy. {yields} Thermal degradation of the polyester in nitrogen has been studied at several heating rates by thermogravimetric analysis. {yields} The activation energies were calculated by different methods. And the possible conversation function was estimated. {yields} The life time estimates for the polyester can be determined and the results demonstrate that the polymer possesses good thermal resistance. - Abstract: A novel Schiff base type polyester containing 2,2'-diamino-4,4'-bithiazole (DABT) was prepared by low-temperature interface polycondensation of 1,4-benzenedicarbonyl dichloride with 4,4'-(4,4'-bithiazole-2,2'-diylbis(imine-2,1-diyl) diphenol (BDDP), which is derived from a 2,2'-diamino-4,4'-bithiazole (DABT) Schiff base reacted with a 4-hydroxybenzaldehyde monomer. The newly generated polyester was characterized by FTIR spectroscopy, elemental analysis, and X-ray diffraction spectroscopy. The thermal decomposition was investigated in nitrogen atmosphere using thermogravimetric analysis. The activation energies of the decomposition step of the polyester were calculated through the isoconversional methods of Kissinger-Akahira-Sunose (K-A-S) and the iterative equation. In order to estimate the reaction model that best describes the experimental data, the use of an empirical kinetic equation based on that proposed by Sestak-Berggren was investigated here. On the basis of the kinetic data, the life time estimates for the polyester generated from the weight loss of 5%, 10%, and 15% were also constructed.

Differential effect of alpha-difluoromethylornithine on the in vivo uptake of 14C-labeled polyamines and methylglyoxal bis(guanylhydrazone) by a rat prostate-derived tumor

International Nuclear Information System (INIS)

Heston, W.D.; Kadmon, D.; Covey, D.F.; Fair, W.R.

1984-01-01

The uptake of exogenously administered radiolabeled polyamines by a rat prostate-derived tumor line, the Dunning R3327 MAT-Lu, and various normal tissues was studied. Pretreatment of tumor cells in vitro with alpha-difluoromethylornithine (DFMO), a polyamine synthesis inhibitor, resulted in a markedly enhanced uptake of both [ 14 C]putrescine and [14 C]spermidine. The in vitro uptake of [ 14 C]putrescine by these cells was effectively inhibited by unlabeled spermine, spermidine, 1,8-diaminooctane, 1,7-diaminoheptane, 1,6-diaminohexane, 1,5-diaminopentane, 1,4-diaminopentane, and 1,4-diaminobutane, but less effectively by 1,4-diamino-2,3-butene and 1,4-diamino-2,3-butyne. The diamines, 1,3-diaminopropane and 1,2-diaminoethane, were ineffective in inhibiting [ 14 C]putrescine uptake in vitro into the R3327 MAT-Lu cell line. When tumor-bearing animals were pretreated with DFMO or with DFMO and 5-alpha-dihydrotestosterone propionate, the tumor and prostate uptake of [ 14 C]putrescine and [ 14 C]-cadaverine was enhanced but not substantially increased in other tissues. In contrast to the in vitro results, spermidine and spermine were not enhanced substantially by DFMO pretreatment into any tissue, and their uptake into the tumor actually decreased. Ethylenediamine, which does not utilize the polyamine transport system, did not have its uptake increased into any tissue following DFMO pretreatment. The chemotherapeutic agent, methylglyoxal bis(guanylhydrazone), which utilizes the polyamine transport system for uptake into cells, exhibited uptake behavior different from that of the polyamines

Differential effect of alpha-difluoromethylornithine on the in vivo uptake of 14C-labeled polyamines and methylglyoxal bis(guanylhydrazone) by a rat prostate-derived tumor

Energy Technology Data Exchange (ETDEWEB)

Heston, W.D.; Kadmon, D.; Covey, D.F.; Fair, W.R.

1984-03-01

The uptake of exogenously administered radiolabeled polyamines by a rat prostate-derived tumor line, the Dunning R3327 MAT-Lu, and various normal tissues was studied. Pretreatment of tumor cells in vitro with alpha-difluoromethylornithine (DFMO), a polyamine synthesis inhibitor, resulted in a markedly enhanced uptake of both (/sup 14/C)putrescine and (14 C)spermidine. The in vitro uptake of (/sup 14/C)putrescine by these cells was effectively inhibited by unlabeled spermine, spermidine, 1,8-diaminooctane, 1,7-diaminoheptane, 1,6-diaminohexane, 1,5-diaminopentane, 1,4-diaminopentane, and 1,4-diaminobutane, but less effectively by 1,4-diamino-2,3-butene and 1,4-diamino-2,3-butyne. The diamines, 1,3-diaminopropane and 1,2-diaminoethane, were ineffective in inhibiting (/sup 14/C)putrescine uptake in vitro into the R3327 MAT-Lu cell line. When tumor-bearing animals were pretreated with DFMO or with DFMO and 5-alpha-dihydrotestosterone propionate, the tumor and prostate uptake of (/sup 14/C)putrescine and (/sup 14/C)-cadaverine was enhanced but not substantially increased in other tissues. In contrast to the in vitro results, spermidine and spermine were not enhanced substantially by DFMO pretreatment into any tissue, and their uptake into the tumor actually decreased. Ethylenediamine, which does not utilize the polyamine transport system, did not have its uptake increased into any tissue following DFMO pretreatment. The chemotherapeutic agent, methylglyoxal bis(guanylhydrazone), which utilizes the polyamine transport system for uptake into cells, exhibited uptake behavior different from that of the polyamines.

Interface for Light-Driven Electron Transfer by Photosynthetic Complexes Across Block Copolymer Membranes.

Science.gov (United States)

Kuang, Liangju; Olson, Tien L; Lin, Su; Flores, Marco; Jiang, Yunjiang; Zheng, Wan; Williams, JoAnn C; Allen, James P; Liang, Hongjun

2014-03-06

Incorporation of membrane proteins into nanodevices to mediate recognition and transport in a collective and scalable fashion remains a challenging problem. We demonstrate how nanoscale photovoltaics could be designed using robust synthetic nanomembranes with incorporated photosynthetic reaction centers (RCs). Specifically, RCs from Rhodobacter sphaeroides are reconstituted spontaneously into rationally designed polybutadiene membranes to form hierarchically organized proteopolymer membrane arrays via a charge-interaction-directed reconstitution mechanism. Once incorporated, the RCs are fully active for prolonged periods based upon a variety of spectroscopic measurements, underscoring preservation of their 3D pigment configuration critical for light-driven charge transfer. This result provides a strategy to construct solar conversion devices using structurally versatile proteopolymer membranes with integrated RC functions to harvest broad regions of the solar spectrum.

ATRP and ROMP: Modular chemical tools for advanced macromolecular engineering

Energy Technology Data Exchange (ETDEWEB)

Morandi, G.; Pioge, S.; Pascual, S.; Montembault, V.; Legoupy, S. [LCOM - Chimie des Polymeres, UCO2M, UMR CNRS 6011, Universite du Maine, Avenue O. Messiaen, 72085 Le Mans (France); Fontaine, L. [LCOM - Chimie des Polymeres, UCO2M, UMR CNRS 6011, Universite du Maine, Avenue O. Messiaen, 72085 Le Mans (France)], E-mail: laurent.fontaine@univ-lemans.fr

2009-03-01

Well-defined graft copolymers were synthesized through the combination of two highly controlled polymerizations, ATRP (Atom Transfer Radical Polymerization) and ROMP (Ring-Opening Metathesis Polymerization). Synthesis of {alpha}-cyclobutenyl polystyrene-b-poly(tert-butyl acrylate) macromonomers was first performed by ATRP from an original initiator. ROMP of these macromonomers using Grubb's generation II catalyst ((IMesH{sub 2})(Cy{sub 3}P)RuCl{sub 2}(CHPh)) has allowed to synthesize well-defined graft copolymers with a polybutadiene backbone and polystyrene-b-poly(tert-butylacrylate) grafts. {alpha}-Cyclobutenyl polystyrene-b-poly(acrylic acid) macromonomers were prepared by acidolysis. An amphiphilic water-soluble {alpha}-cyclobutenyl polystyrene-b-poly(acrylic acid) macromonomer has been successfully employed as stabilizer in emulsion polymerization of styrene.

Nearly indestructable supports for HPLC

International Nuclear Information System (INIS)

Carr, P.W.; Rigney, M.P.; Schafer, W.A.

1991-01-01

A suite of extremely stable highly porous microparticulate supports suitable for use in high performance liquid chromatography has been developed. All the materials are based on zirconium oxide as the substrate. The dissolution of this material in aqueous solutions is undetectable by inductively coupled plasma spectroscopy in solutions ranging in pH from 1 to 14 at temperatures of up to 100 C. In contrast, alumina and alumina-based phases are soluble both at pHs less than 3 and greater than 11. In this paper a series of stationary phases, including two reversed-phase materials, one based on coating zirconia with polybutadiene and a second based on a layer of elemental carbon on zirconia, and a cation exchange phase suitable for protein chromatography, are described

Ligation of Cadmium (II) complex by 2,5-diamino-1,3,4-thiadiazole ...

African Journals Online (AJOL)

A low value of conductivity revealed the non-electrolytic nature of the compound. The metal chelates possessed greater activities against bacterial strains used compared to the control drug and the ligand used. The study concluded that the metal complex showed mild toxicity at the orally administered dosage-level (0.6 ...

2,3-diaminopyridine functionalized reduced graphene oxide-supported palladium nanoparticles with high activity for electrocatalytic oxygen reduction reaction

Energy Technology Data Exchange (ETDEWEB)

Yasmin, Sabina; Joo, Yuri; Jeon, Seungwon, E-mail: swjeon3380@naver.com

2017-06-01

Highlights: • Synthesis of 2,3 DAP-rGO/Pd catalyst by electrochemical deposition method. • The ORR performance of 2,3 DAP-rGO/Pd catalyst was evaluated by CV and RRDE. • ORR possess 4-electron pathway with lower H{sub 2}O{sub 2}. • Better anodic fuel tolerance and long term stable than that of commercial Pt/C. - Abstract: The electrochemical deposition of Pd nanoparticles (Pd NPs) on 2,3 diamino pyridine functionalized reduced graphene oxide (2,3 DAP-rGO/Pd) has been investigated for the oxygen reduction reaction (ORR) in alkaline media. First, 2,3 diaminopyridine functionalized graphene oxide (2,3 DAP-rGO) has been synthesized via simple hydrothermal method. Then, palladium is directly incorporated into the 2,3 DAP-rGO by electrochemical deposition method to generate 2,3 DAP-rGO/Pd composites. The as-prepared material 2,3 DAP-rGO/Pd has been characterized by various instrumental methods. The morphological analysis shows the cluster-like Pd nanoparticles are dispersed onto the 2,3 diamino pyridine functionalized reduced graphene oxide (2,3 DAP-rGO). The electrocatalytic activities have been verified using cyclic voltammetry (CV) and hydrodynamic voltammetry and chronoamperometry techniques in 0.1 M KOH electrolyte. The as-synthesized 2,3 DAP-rGO/Pd shows higher catalytic activity toward ORR with more positive onset potential and cathodic current density, superior methanol/ethanol tolerance and excellent stability in alkaline medium. It is also noteworthy that the 2,3 DAP-rGO/Pd exhibits a four-electron transfer pathway for ORR with lower H{sub 2}O{sub 2} yield.

2,3-diaminopyridine functionalized reduced graphene oxide-supported palladium nanoparticles with high activity for electrocatalytic oxygen reduction reaction

International Nuclear Information System (INIS)

Yasmin, Sabina; Joo, Yuri; Jeon, Seungwon

2017-01-01

Highlights: • Synthesis of 2,3 DAP-rGO/Pd catalyst by electrochemical deposition method. • The ORR performance of 2,3 DAP-rGO/Pd catalyst was evaluated by CV and RRDE. • ORR possess 4-electron pathway with lower H_2O_2. • Better anodic fuel tolerance and long term stable than that of commercial Pt/C. - Abstract: The electrochemical deposition of Pd nanoparticles (Pd NPs) on 2,3 diamino pyridine functionalized reduced graphene oxide (2,3 DAP-rGO/Pd) has been investigated for the oxygen reduction reaction (ORR) in alkaline media. First, 2,3 diaminopyridine functionalized graphene oxide (2,3 DAP-rGO) has been synthesized via simple hydrothermal method. Then, palladium is directly incorporated into the 2,3 DAP-rGO by electrochemical deposition method to generate 2,3 DAP-rGO/Pd composites. The as-prepared material 2,3 DAP-rGO/Pd has been characterized by various instrumental methods. The morphological analysis shows the cluster-like Pd nanoparticles are dispersed onto the 2,3 diamino pyridine functionalized reduced graphene oxide (2,3 DAP-rGO). The electrocatalytic activities have been verified using cyclic voltammetry (CV) and hydrodynamic voltammetry and chronoamperometry techniques in 0.1 M KOH electrolyte. The as-synthesized 2,3 DAP-rGO/Pd shows higher catalytic activity toward ORR with more positive onset potential and cathodic current density, superior methanol/ethanol tolerance and excellent stability in alkaline medium. It is also noteworthy that the 2,3 DAP-rGO/Pd exhibits a four-electron transfer pathway for ORR with lower H_2O_2 yield.

Lysinuric protein intolerance in a 5-month-old girl

Directory of Open Access Journals (Sweden)

Viplav Narayan Deogaonkar

2016-01-01

Full Text Available Lysinuric protein intolerance (LPI, also known as cationic aminoaciduria, hyperdibasic aminoaciduria type 2, or familial protein intolerance, is an autosomal recessive defect of diamino acid transport. LPI is characterized by the inability of the body to digest and utilize certain amino acids, namely lysine, arginine, and ornithine. As a result, there is an increased excretion of these amino acids, which in turn affects the liver, the gastrointestinal tract, lungs, immune system, spleen, and organs producing blood. We report a 5-month-old girl born of third degree consanguineous marriage who presented with hepatosplenomegaly with sepsis and worsening jaundice due to LPI.

Effect of gamma irradiation on mechanical and thermal properties of DGEBA/cycloaliphatic amine networks with potential for medical applications; Efeito da irradiacao gama nas propriedades mecanicas e termicas de redes DGEBA/amina cicloalifatica com potencial para aplicacoes medicas

Energy Technology Data Exchange (ETDEWEB)

Neves, Juliana C.; Silva, Glaura G., E-mail: glaura@qui.ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil); Mendes, Marcio W. Duarte; Bressiani, Ana H.; Bressiani, Jose C. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Garcia, Filiberto Gonzalez [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

2013-07-01

Two epoxy polymers based on diglycidyl ether of bisphenol A (DGEBA), cured with piperidine (Pip) and 4,4'-diamino-3,3'-dimethyldicyclohexylmethane (3DCM), were characterized before and after treatment with γ irradiation. The changes in the mechanical and thermal properties were studied by elastic modulus, glass transition temperature and degradation temperature measurements. A dose of 50 kGy of irradiation caused subtle variations in properties such as rigidity and stability, which are relevant from the fundamental point of view. The variations do not imply on negative impact when considering the stage of sterilization during the use of these systems as a biomaterial in the medical area. (author)

A novel approach toward the synthesis of some new tridentate Schiff bases from anil-like compounds

Directory of Open Access Journals (Sweden)

Bagheri Fatemeh

2016-01-01

Full Text Available A novel method was developed for synthesizing a series of new three dentate Schiff base ligands starting from hydroxynaphthalidene pyrimidinyl amines with o-phenylenediamines or o-aminophenol or 2-amino-3-hydroxy-pyri-dine in the presence of formic acid catalyst under solvent-free conditions. In these reactions [1+1] condensation product as half-unit ligand was obtained. Moreover, the reaction of hydroxynaphthalidene pyrimidinyl amines with 3,4-diamino-pyridine and 1,8-naphthalenediamine lead to the formation of C2-naphthylated imidazopyridine and dihydropyrimidine, respectively. The attractive features of this protocol are: use of inexpensive catalyst, operationally simple, short reaction times, easy handling, and good yields.

Efeito da ordem de adição de componentes nas propriedades de misturas NR/BR Properties of NR/BR mixtures and their dependence on the preparation mode

Directory of Open Access Journals (Sweden)

Daniele F. Castro

2007-03-01

Full Text Available Misturas de elastômeros vêm sendo largamente utilizadas na indústria de borracha com a finalidade de se conseguir propriedades específicas, sem a necessidade de sintetizar novos polímeros. O polibutadieno puro (BR não apresenta boas características de processamento e de resistência à tração e ao rasgamento sendo, por essa razão, normalmente utilizado em misturas com outros elastômeros, principalmente NR e SBR. Tais misturas são amplamente utilizadas na indústria de pneus. Neste trabalho o polibutadieno (BR foi misturado à borracha natural (NR na proporção de 1:1 em peso. As composições foram preparadas em misturador de cilindros, empregando-se quatro maneiras distintas de incorporação dos aditivos. Após a vulcanização, foram estudadas as propriedades mecânicas (resistência à tração, ao rasgamento e dureza e a morfologia das composições. Os resultados mostram que, apesar de apresentarem a mesma formulação, as propriedades das misturas são bastante influenciadas pelo modo de preparo.Elastomer Blends have been widely used in the rubber industry with the purpose of reaching specific properties without the need of synthesizing new polymers. Polybutadiene rubber (BR presents poor stress and tear strengths, which is the main reason why BR is usually blended with NR and SBR. These blends are extensively used in the manufacture of tyres. In this work natural rubber (NR was mixed to polybutadiene rubber (BR in a 50:50 w/w ratio. The compositions were prepared in a two-roll mill employing four different modes of introducing the additives. After vulcanization, the mixtures were studied with evaluation of their mechanical (stress and tear strengths and hardness properties and morphology. The results show that the properties varied even using the same NR/BR formulations due to the different preparation techniques.

Methacrylic Zwitterionic, Thermoresponsive, and Hydrophilic (Co)Polymers via Cu(0)-Polymerization: The Importance of Halide Salt Additives.

Science.gov (United States)

Simula, Alexandre; Anastasaki, Athina; Haddleton, David M

2016-02-01

The synthesis of hydrophilic, thermoresponsive, and zwitterionic polymethacrylates is reported by Cu(0)-mediated reversible deactivation radical polymerization in water and/or water/alcohol mixtures. The predisproportionation of [Cu(I) (PMDETA)Cl] in water prior to initiator and monomer addition is exploited to yield well-defined polymethacrylates with full monomer conversions in 30 min. The addition of supplementary halide salts (NaCl) enables the synthesis of various molecular weight poly[poly(ethylene glycol) methyl ether methacrylate] (PEGMA475) (DPn = 10-80, Mn ≈ 10,000-40 000 g mol(-1)) with full monomer conversion and narrow molecular weight distributions attained in all cases (Đ ≈ 1.20-1.30). A bifunctional PEG initiator (average Mn ≈ 1000 g mol(-1)) is utilized for the polymerization of a wide range of methacrylates including 2-dimethylaminoethyl methacrylate, 2-morpholinoethyl methacrylate, [2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide, and 2-methacryloyloxyethyl phosphorylcholine. Despite the high water content, high end group fidelity is demonstrated by in situ chain extensions and block copolymerizations with PEGMA475 yielding well-defined functional telechelic pentablock copolymers within 2.5 h. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Development of procedures for calculating stiffness and damping properties of elastomers in engineering applications. Part 2: Elastomer characteristics at constant temperature

Science.gov (United States)

Gupta, P. K.; Tessarzik, J. M.; Cziglenyi, L.

1974-01-01

Dynamic properties of a commerical polybutadiene compound were determined at a constant temperature of 32 C by a forced-vibration resonant mass type of apparatus. The constant thermal state of the elastomer was ensured by keeping the ambient temperature constant and by limiting the power dissipation in the specimen. Experiments were performed with both compression and shear specimens at several preloads (nominal strain varying from 0 to 5 percent), and the results are reported in terms of a complex stiffness as a function of frequency. Very weak frequency dependence is observed and a simple power law type of correlation is shown to represent the data well. Variations in the complex stiffness as a function of preload are also found to be small for both compression and shear specimens.

On the relationship between two popular lattice models for polymer melts

Science.gov (United States)

Subramanian, Gopinath; Shanbhag, Sachin

2008-10-01

A mapping between two well known lattice bond-fluctuation models for polymers [I. Carmesin and K. Kremer, Macromolecules 21, 2819 (1988); J. S. Shaffer, J. Chem. Phys. 101, 4205 (1994)] is investigated by performing primitive path analysis to identify the average number of monomers per entanglement. Simulations conducted using both models, and previously published data are compared in an attempt to establish relationships between molecular weight, lengthscale, and timescale. Using these relationships, an examination of the self-diffusion coefficient yields excellent agreement not only between the two models, but also with experimental data on polystyrene, polybutadiene, and polydimethylsiloxane. However, it is shown that even with the limited set of criteria examined in this paper, a true mapping between these two models is elusive. Nevertheless, a practical guide to convert between models is provided.

Preliminary characterization of propellants based on p(GA/BAMO) and pAMMO binders

Energy Technology Data Exchange (ETDEWEB)

Barbieri, Ugo; Polacco, Giovanni [Department of Chemical Engineering, University of Pisa (Italy); Keicher, Thomas [Fraunhofer-Institut fuer Chemische Technologie (ICT), Pfinztal (Germany); Massimi, Roberto [AVIO S.p.A., Roma (Italy)

2009-10-15

In previous papers, the synthesis and characterization of OH-terminated glycidyl azide-r-(3,3-bis(azidomethyl)oxetane) copolymers (GA/BAMO) and poly-3-azidomethyl-3-methyl oxetane (pAMMO) by azidation of their respective polymeric substrates were described. The main objective was the preparation of amorphous azido-polymers, as substitutes of hydroxy-terminated polybutadiene (HTPB) in new formulations of energetic propellants. Here, the subsequent characterization of both the binders is presented. First of all, several isocyanates were checked in order to optimize the curing reaction, and then two small-scale formulations of a propellant, based on aluminium and ammonium perchlorate, were prepared and characterized. Finally, the mechanical properties and burning rate were compared to those of a similar propellant based on HTPB as binder. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

Atomic motions in the αβ-region of glass-forming polymers: molecular versus mode coupling theory approach

International Nuclear Information System (INIS)

Colmenero, Juan; Narros, Arturo; Alvarez, Fernando; Arbe, Arantxa; Moreno, Angel J

2007-01-01

We present fully atomistic molecular dynamics simulation results on a main-chain polymer, 1,4-polybutadiene, in the merging region of the α- and β-relaxations. A real-space analysis reveals the occurrence of localized motions ('β-like') in addition to the diffusive structural relaxation. A molecular approach provides a direct connection between the local conformational changes reflected in the atomic motions and the secondary relaxations in this polymer. Such local processes occur just in the time window where the β-process of the mode coupling theory is expected. We show that the application of this theory is still possible and yields an unusually large value of the exponent parameter. This result might originate from the competition between two mechanisms for dynamic arrest: intermolecular packing and intramolecular barriers for local conformational changes ('β-like')

Infrared Spectroscopic Study on Structural Change and Interfacial Interaction in Rubber Composites Filled with Silica-Kaolin Hybrid Fillers

Science.gov (United States)

Chen, Y.; Guan, J.; Hu, H.; Gao, H.; Zhang, L.

2016-07-01

A series of natural rubber/styrene butadiene rubber/polybutadiene rubber composites was prepared with nanometer silica and micron kaolin by a dry modification process, mechanical compounding, and mold vulcanization. Fourier transform infrared spectroscopy and a scanning electron microscope were used to investigate the structural changes and interfacial interactions in composites. The results showed that the "seesaw" structure was formed particularly with the incorporation of silica particles in the preparation process, which would be beneficial to the dispersibility of fillers in the rubber matrix. The kaolinite platelets were generally arranged in directional alignment. Kaolinite with smaller particle size and low-defect structure was more stable in preparation, but kaolinite with larger particle size and high defect structure tended to change the crystal structure. The composite prepared in this research exhibited excellent mechanical and thermal properties.

Ultrafiltration by gyroid nanoporous polymer membranes

DEFF Research Database (Denmark)

Li, Li; Szewczykowski, Piotr Przemyslaw; Clausen, Lydia D.

2011-01-01

the effect of membrane fouling on the flux decline and rejection profiles. Significant fouling occurred in the case of hydrophobic membranes in contact with water solutions, while in the presence of high concentration of ethanol in the filtration solution and in the case of hydrophilized membranes...... the fouling was reduced. The observed rejection of PEG was compared with theoretic predictions, as described by the Bungay–Brenner model. The model satisfactorily described the rejection profile of PEG up to 12kg/mol through hydrophobic membranes in the presence of excess ethanol. A significantly reduced......Gyroid nanoporous cross-linked 1,2-polybutadiene membranes with uniform pores were developed for ultrafiltration applications. The gyroid porosity has the advantage of isotropic percolation with no need for structure pre-alignment. The effects of solvent and surface photo...

Effect of surfactant species and electrophoretic medium composition on the electrophoretic behavior of neutral and water-insoluble linear synthetic polymers in nonaqueous capillary zone electrophoresis.

Science.gov (United States)

Fukai, Nao; Kitagawa, Shinya; Ohtani, Hajime

2017-07-01

We have recently demonstrated the separation of neutral and water-insoluble linear synthetic polymers in nonaqueous capillary zone electrophoresis (NACZE) using a cationic surfactant of cetyltrimethylammonium chloride (CTAC). In this study, eight ionic surfactants were investigated for the separation of four synthetic polymers (polystyrene, polymethylmethacrylates, polybutadiene, and polycarbonate); only three surfactants (CTAC, dimethyldioctadecylammonium bromide, and sodium dodecylsulfate) caused their separation. The order of the interaction between the polymers and the surfactants depended on both the surfactant species and the composition of the electrophoretic medium. Their investigation revealed that the separation is majorly affected by the hydrophobic interactions between the polymers and the ionic surfactants. In addition, the electrophoretic behavior of polycarbonate suggested that electrostatic interaction also affects the selectivity of the polymers. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Chemical modification of HTPB for application as polymeric additives for diesel fuel. 1 - phenyl ethers; Modificacao quimicado PBLH para aplicacao como aditivos polimericos para oleo diesel. 1. eteres fenilicos

Energy Technology Data Exchange (ETDEWEB)

Carvalho, Agne R.; Prezibella, Alysson M.; Ferraz, Fernando A.; Soldi, Rafael A.; Oliveira, Angelo R.S.; Cesar-Oliveira, Maria Aparecida F. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Dept. de Quimica. Lab. de Polimeros Sinteticos

2007-07-01

The petroleum industry faces several problems related to the crystallization of paraffins, in petroleum and its derivatives, with the reduction of the service temperature. To solve this problem polymeric additives are used, of which the esters have been enough studied in several areas of the world, except in Brazil. In this work, this class of pour point depressant additives it was obtained through the chemical modification of Hydroxyl Terminate Polybutadiene (HTPB) that present a hydrocarbon chemical structure containing one double bound in each repetitive unit and hydroxyl groups of the primary and secondary allylic types - functional groups potentially reactive. The obtained products were characterized by Fourier transformed infrared spectroscopy and nuclear magnetic resonance, and they are being tested as additive for the pour point reduction of a diesel oil samples (REPAR-PETROBRAS). (author)

Performances Study of a Hybrid Rocket Engine

Directory of Open Access Journals (Sweden)

Adrian-Nicolae BUTURACHE

2018-06-01

Full Text Available This paper presents a study which analyses the functioning and performances optimization of a hybrid rocket engine based on gaseous oxygen and polybutadiene polymer (HTPB. Calculations were performed with NASA CEA software in order to obtain the parameters resulted following the combustion process. Using these parameters, the main parameters of the hybrid rocket engine were optimized. Using the calculus previously stated, an experimental rocket engine producing 100 N of thrust was pre-dimensioned, followed by an optimization of the rocket engine as a function of several parameters. Having the geometry and the main parameters of the hybrid rocket engine combustion process, numerical simulations were performed in the CFX – ANSYS commercial software, which allowed visualizing the flow field and the jet expansion. Finally, the analytical calculus was validated through numerical simulations.

Design and Fabrication of a 200N Thrust Rocket Motor Based on NH4ClO4+Al+HTPB as Solid Propellant

Science.gov (United States)

Wahid, Mastura Ab; Ali, Wan Khairuddin Wan

2010-06-01

The development of rocket motor using potassium nitrate, carbon and sulphur mixture has successfully been developed by researchers and students from UTM and recently a new combination for solid propellant is being created. The new solid propellant will combine a composition of Ammonium perchlorate, NH4ClO4 with aluminium, Al and Hydroxyl Terminated Polybutadiene, HTPB as the binder. It is the aim of this research to design and fabricate a new rocket motor that will produce a thrust of 200N by using this new solid propellant. A static test is done to obtain the thrust produced by the rocket motor and analyses by observation and also calculation will be done. The experiment for the rocket motor is successful but the thrust did not achieve its required thrust.

Micellization-induced deprotonation of thermoresponsive surfactant CAE-85 — the telechelic carboxylic group derivative of Pluronic P85

Czech Academy of Sciences Publication Activity Database

Šturcová, Adriana; Dybal, Jiří; Braunová, Alena; Pechar, Michal

2011-01-01

Roč. 57, č. 2 (2011), s. 300-305 ISSN 0924-2031 R&D Projects: GA ČR GA203/09/1478; GA ČR GA203/08/0543 Institutional research plan: CEZ:AV0Z40500505 Keywords : pluronic * ATR FTIR * deprotonation Subject RIV: CD - Macromolecular Chemistry Impact factor: 1.650, year: 2011

Synthesis and thermal behavior of telechelic poly(butadiene)diols with azobenzene-based liquid-crystalline units in side chains

Czech Academy of Sciences Publication Activity Database

Poláková, Lenka; Sedláková, Zdeňka; Látalová, Petra

2010-01-01

Roč. 64, č. 4 (2010), s. 315-326 ISSN 0170-0839 R&D Projects: GA ČR GA202/09/2078 Institutional research plan: CEZ:AV0Z40500505 Keywords : azobenzene mesogens * radical addition * poly(butadiene)diols Subject RIV: CD - Macromolecular Chemistry Impact factor: 1.215, year: 2010

Surface Modification of Nanoporous 1,2-Polybutadiene by Atom Transfer Radical Polymerization or Click Chemistry

DEFF Research Database (Denmark)

Guo, Fengxiao; Jankova Atanasova, Katja; Schulte, Lars

2010-01-01

ATRP-grafting of hydrophilic polyacrylates and click of MPEG, the originally hydrophobic samples transformed into hydrophilic nanoporous materials. The successful modification was confirmed by infrared spectroscopy, contact angle measurements and measurements of spontaneous water uptake, while...... the morphology was investigated by small-angle X-ray scattering and transmission electron microscopy....

Polymer Hydrogel/Polybutadiene/Iron Oxide Nanoparticle Hybrid Actuators for the Characterization of NiTi Implants

Directory of Open Access Journals (Sweden)

Aleksandra Jeličić

2009-03-01

Full Text Available One of the main issues with the use of nickel titanium alloy (NiTi implants in cardiovascular implants (stents is that these devices must be of very high quality in order to avoid subsequent operations due to failing stents. For small stents with diameters below ca. 2 mm, however, stent characterization is not straightforward. One of the main problems is that there are virtually no methods to characterize the interior of the NiTi tubes used for fabrication of these tiny stents. The current paper reports on a robust hybrid actuator for the characterization of NiTi tubes prior to stent fabrication. The method is based on a polymer/hydrogel/magnetic nanoparticle hybrid material and allows for the determination of the inner diameter at virtually all places in the raw NiTi tubes. Knowledge of the inner structure of the raw NiTi tubes is crucial to avoid regions that are not hollow or regions that are likely to fail due to defects inside the raw tube. The actuator enables close contact of a magnetic polymer film with the inner NiTi tube surface. The magnetic signal can be detected from outside and be used for a direct mapping of the tube interior. As a result, it is possible to detect critical regions prior to expensive and slow stent fabrication processes.

Nitrogen-Rich Porous Polymers for Carbon Dioxide and Iodine Sequestration for Environmental Remediation.

Science.gov (United States)

Abdelmoaty, Yomna H; Tessema, Tsemre-Dingel; Choudhury, Fatema Akthar; El-Kadri, Oussama M; El-Kaderi, Hani M

2018-05-09

The use of fossil fuels for energy production is accompanied by carbon dioxide release into the environment causing catastrophic climate changes. Meanwhile, replacing fossil fuels with carbon-free nuclear energy has the potential to release radioactive iodine during nuclear waste processing and in case of a nuclear accident. Therefore, developing efficient adsorbents for carbon dioxide and iodine capture is of great importance. Two nitrogen-rich porous polymers (NRPPs) derived from 4-bis-(2,4-diamino-1,3,5-triazine)-benzene building block were prepared and tested for use in CO 2 and I 2 capture. Copolymerization of 1,4-bis-(2,4-diamino-1,3,5-triazine)-benzene with terephthalaldehyde and 1,3,5-tris(4-formylphenyl)benzene in dimethyl sulfoxide at 180 °C afforded highly porous NRPP-1 (SA BET = 1579 m 2 g -1 ) and NRPP-2 (SA BET = 1028 m 2 g -1 ), respectively. The combination of high nitrogen content, π-electron conjugated structure, and microporosity makes NRPPs very effective in CO 2 uptake and I 2 capture. NRPPs exhibit high CO 2 uptakes (NRPP-1, 6.1 mmol g -1 and NRPP-2, 7.06 mmol g -1 ) at 273 K and 1.0 bar. The 7.06 mmol g -1 CO 2 uptake by NRPP-2 is the second highest value reported to date for porous organic polymers. According to vapor iodine uptake studies, the polymers display high capacity and rapid reversible uptake release for I 2 (NRPP-1, 192 wt % and NRPP-2, 222 wt %). Our studies show that the green nature (metal-free) of NRPPs and their effective capture of CO 2 and I 2 make this class of porous materials promising for environmental remediation.

Simultaneous biosynthesis of putrebactin, avaroferrin and bisucaberin by Shewanella putrefaciens and characterisation of complexes with iron(III), molybdenum(VI) or chromium(V).

Science.gov (United States)

Soe, Cho Zin; Telfer, Thomas J; Levina, Aviva; Lay, Peter A; Codd, Rachel

2016-09-01

Cultures of Shewanella putrefaciens grown in medium containing 10mM 1,4-diamino-2-butanone (DBO) as an inhibitor of ornithine decarboxylase and 10mM 1,5-diaminopentane (cadaverine) showed the simultaneous biosynthesis of the macrocyclic dihydroxamic acids: putrebactin (pbH 2 ), avaroferrin (avH 2 ) and bisucaberin (bsH 2 ). The level of DBO did not completely repress the production of endogenous 1,4-diaminobutane (putrescine) as the native diamine substrate of pbH 2 . The relative concentration of pbH 2 :avH 2 :bsH 2 was 1:2:1, which correlated with the substrate selection of putrescine:cadaverine in a ratio of 1:1. The macrocycles were characterised using LC-MS as free ligands and as 1:1 complexes with Fe(III) of the form [Fe(pb)] + , [Fe(av)] + or [Fe(bs)] + , with labile ancillary ligands in six-coordinate complexes displaced during ESI-MS acquisition; or with Mo(VI) of the form [Mo(O) 2 (pb)], [Mo(O) 2 (av)] or [Mo(O) 2 (bs)]. Chromium(V) complexes of the form [CrO(pb)] + were detected from solutions of Cr(VI) and pbH 2 in DMF using X-band EPR spectroscopy. Supplementation of S. putrefaciens medium with DBO and 1,3-diaminopropane, 1,6-diaminohexane or 1,4-diamino-2(Z)-butene (Z-DBE) resulted only in the biosynthesis of pbH 2 . The work has identified a native system for the simultaneous biosynthesis of a suite of three macrocyclic dihydroxamic acid siderophores and highlights both the utility of precursor-directed biosynthesis for expanding the structural diversity of siderophores, and the breadth of their coordination chemistry. Copyright © 2015 Elsevier Inc. All rights reserved.

A New Platform for Profiling Degradation-Related Impurities Via Exploiting the Opportunities Offered by Ion-Selective Electrodes: Determination of Both Diatrizoate Sodium and Its Cytotoxic Degradation Product.

Science.gov (United States)

Riad, Safaa M; Abd El-Rahman, Mohamed K; Fawaz, Esraa M; Shehata, Mostafa A

2018-05-01

Although the ultimate goal of administering active pharmaceutical ingredients (APIs) is to save countless lives, the presence of impurities and/or degradation products in APIs or formulations may cause harmful physiological effects. Today, impurity profiling (i.e., the identity as well as the quantity of impurity in a pharmaceutical) is receiving critical attention from regulatory authorities. Despite the predominant use of spectroscopic and chromatographic methods over electrochemical methods for impurity profiling of APIs, this work investigates the opportunities offered by electroanalytical methods, particularly, ion-selective electrodes (ISEs), for profiling degradation-related impurities (DRIs) compared with conventional spectroscopic and chromatographic methods. For a meaningful comparison, diatrizoate sodium (DTA) was chosen as the anionic X-ray contrast agent based on its susceptibility to deacetylation into its cytotoxic and mutagenic degradation product, 3,5-diamino-2,4,6 triiodobenzoic acid (DTB). This cationic diamino compound can be also detected as an impurity in the final product because it is used as a synthetic precursor for the synthesis of DTA. In this study, four novel sensitive and selective sensors for the determination of both DTA and its cytotoxic degradation products are presented. Sensors I and II were developed for the determination of the anionic drug, DTA, and sensors III and IV were developed for the determination of the cationic cytotoxic impurity. The use of these novel sensors not only provides a stability-indicating method for the selective determination of DTA in the presence of its degradation product, but also permits DRI profiling. Moreover, a great advantage of these proposed ISE systems is their higher sensitivity for the quantification of DTB relative to other spectroscopic and chromatographic methods, so it can measure trace amounts of DTB impurities in DTA bulk powder and pharmaceutical formulation without a need for

Thermodynamic and kinetic studies of the equilibration reaction between the sulfur and carbon bonded forms of a cobalt(III) complex with the ligands 1,4,7-triazycyclononane and 1,4-diaza-7-thiacyclodecane

DEFF Research Database (Denmark)

Song, Y.S.; Becker, J.; Kofod, Pauli

1996-01-01

The new cyclic thioether 1,4-diaza-7-thiacyclodecane, dathicd, has been synthesized and used for the prepn. of the sulfur- and carbon-bonded cobalt(III) complexes: [Co(tacn)(S-dathicd)]Cl3.5H2O and [Co(tacn)(C-dathicd)](ClO4)2 (tacn, 1,4,7-triazacyclononane; C-dathicd, 1,4-diamino-7-thiacyclodecan......-sulfur complex to form the alkyl complex gave 100% loss of deuterium. It is concluded that the labile methylene proton is bound to the carbon atom which in the alkyl complex is bound to cobalt(III). From the kinetic data it is estd. that the carbanion reacts with water 270 times faster than it is captured...

Photo and Thermal Behavior of New Reinforced Polyamide-nanocomposite Montmorillonite on 2,3-Pyrazin Dicarboxylic Acid

Science.gov (United States)

Faghihi, Khalil; Samiei, Mojtaba; Hajibeygi, Mohsen

2012-06-01

Two new samples of reinforce polyamidemontmorillonite nanocomposites were synthesized by a convenient solution intercalation technique. Polyamide (PA) 3 as a source of polymer matrix was synthesized by the direct polycondensation reaction of pyrazine 2,3-dicarboxylic acid 1 with 4,4'-diamino diphenyl ether 2 in the presence of triphenyl phosphite (TPP), CaCl2, pyridine and N-methyl-2-pyrrolidone (NMP). The resulting nanocomposite films were characterized by Fourier transform infrared spectra (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). The results showed that organo-modified clay was dispersed homogeneously in PA matrix. TGA indicated an enhancement of thermal stability of new nanocomposites compared with the pure polymer.

The Co-III-C bond in (1-thia-4,7-diazacyclodecyl-kappa N-3(4),N-7,C-10)(1,4,7-triazacyclononane-kappa N-3(1),N-4,N-7)-cobalt(III) dithionate hydrate

DEFF Research Database (Denmark)

Harris, Pernille; Kofod, P.; Song, Y.S.

2003-01-01

In the title compound, [Co(C6H15N3)(C7H15N2S)]S2O6.H2O, the Co-C bond distance is 1.9930 (13) Angstrom, which is shorter than for related compounds with the linear 1,6-diamino-3-thiahexan-4-ide anion in place of the macrocyclic 1-thia-4,7-diazacyclodecan-8-ide anion. The coordinated carbanion pro...... produces an elongation of 0.102 (7) Angstrom of the Co-N bond to the 1,4,7-triazacyclononane N atom in the trans position. This relatively small trans influence is presumably a result of the triamine ligand forming strong bonds to the Co-III atom....

Microwave Assisted Synthesis of Novel Imidazolopyridinyl Indoles as Potent Antioxidant and Antimicrobial Agents

Directory of Open Access Journals (Sweden)

Jaiprakash S. Biradar

2014-01-01

Full Text Available We describe herein the design, synthesis, and pharmacological evaluation of novel series of imidazolopyridinyl indole analogues as potent antioxidants and antimicrobials. These novel compounds (3a–i were synthesized by reacting 3,5-disubstituted-indole-2-carboxylic acid (1a–i with 2,3-diamino pyridine (2 in excellent yield. The novel products were confirmed by their IR, 1H NMR, 13C NMR, mass spectral, and analytical data. These compounds were screened for their antioxidant and antimicrobial activities. Among the compounds tested, 3a–d showed the highest total antioxidant capacity, scavenging, and antimicrobial activities. Compounds 3c-d and 3g-h have shown excellent ferric reducing activity.

Synthèses, caractérisations et étude structurale des complexes de nickel et de cuivre

OpenAIRE

DAR KEBIRA, Fatma

2014-01-01

La condensation d’o-Vanilline avec 1,3-Diamino-2-propanol dans MeOH absolu dans un rapport molaire 2:1 a donné le ligand base Schiff (H2L). Cette base a été utilisé comme ligand tétradentaté pour coordonner les sels de nickel(II) et de cuivre(II) qui mènent aux complexe métallique où le ratio du (métal – ligand) était 1:1. Tous les composés du nickel(II) et du cuivre(II) ont été caractérisés par spectroscopique infrarouge. Analyse élémentaire et diffraction des rayons X ont été...

Design, synthesis and evaluation of 4,7-diamino-1,10-phenanthroline G-quadruplex ligands

DEFF Research Database (Denmark)

Nielsen, Mads Corvinius; Borch, Jonas; Ulven, Trond

2009-01-01

the central ionic column. Introduction of positively charged side chains results in compounds with appreciable G-quadruplex stabilizing properties and high aqueous solubility, with the longer side chains giving more potent compounds. Ligands carrying guanidine side chains in general show higher quadruplex...... stabilizing activity and distinctly slower kinetic properties than their amino and dimethylamino analogues, possibly due to specific hydrogen bond interactions with the G-quadruplex loops....

Comparison of α, β and total ODAP (β-N-oxalyl-L-ά,β- diamino ...

African Journals Online (AJOL)

hope&shola

2010-12-06

Dec 6, 2010 ... 1Gaziosmanpasa University, Agricultural Faculty, Field Crops Department, ... phase high-performance liquid chromatography method ... agricultural conditions that might change the chemical ... MATERIALS AND METHODS.

Redox Behavior of 2,3-Diamino-1,4-naphthoquinone and its N-Alkylated Derivatives

Czech Academy of Sciences Publication Activity Database

Dron, P. I.; Ramešová, Šárka; Holloran, N. P.; Pospíšil, Lubomír; Michl, Josef

2016-01-01

Roč. 28, č. 11 (2016), s. 2855-2860 ISSN 1040-0397 R&D Projects: GA ČR GA15-19143S; GA ČR(CZ) GA16-03085S Institutional support: RVO:61388955 ; RVO:61388963 Keywords : Electrochemistry * Redox reactions * Heterocycles Subject RIV: CG - Electrochemistry; CF - Physical ; Theoretical Chemistry (UOCHB-X) Impact factor: 2.851, year: 2016

EPR Spectroscopy of Radical Ions of a 2,3-Diamino-1,4-naphthoquinone Derivative.

Science.gov (United States)

Tarábek, Ján; Wen, Jin; Dron, Paul I; Pospíšil, Lubomír; Michl, Josef

2018-05-18

We report the electron paramagnetic resonance spectra of the radical cation and radical anion of 1,2,2,3-tetramethyl-2,3-dihydro-1 H-naphtho[2,3- d]imidazole-4,9-dione (1) and its doubly 13 C labeled analogue 2, of interest for singlet fission. The hyperfine coupling constants are in excellent agreement with density functional theory calculations and establish the structures beyond doubt. Unlike the radical cation 1 •+ , the radical anion 1 •- and its parent 1 have pyramidalized nitrogen atoms and inequivalent methyl groups 15 and 16, in agreement with the calculations. The distinction is particularly clear with the labeled analogue 2 •- .

Low molecular weight block copolymers as plasticizers for polystyrene

DEFF Research Database (Denmark)

Hansen, Kristoffer Karsten; Nielsen, Charlotte Juel; Hvilsted, Søren

2005-01-01

/mol and minimum polystyrene content of 50 w/w%, which by us is predicted as the limits for solubility of polystyrene-b-alkyl in polystyrene. DSC showed polystyrene was plasticized, as seen by a reduction in glass transition temperature, by block copolymers consisting of a polystyrene block with molecular weight...... of approximately 1 kg/mol and an alkyl block with a molecular weight of approximately of 0.3 kg/mol. The efficiency of the block copolymers as plasticizers increases with decreasing molecular weight and polystyrene content. In addition, polystyrene-b-alkyl is found to be an efficient plasticizer also...... for polystyrene-b-polyisoprene-b-polystyrene (SIS) block copolymers. The end use properties of SIS plasticized with polystyrene-b-alkyl, measured as tensile strength, is higher than for SIS plasticized with dioctyl adipate. The polystyrene-b-polybutadiene-b-polystyrene and polystyrene-bpoly(propylene glycol...

Sodium Dodecyl Sulfate (SDS-Loaded Nanoporous Polymer as Anti-Biofilm Surface Coating Material

Directory of Open Access Journals (Sweden)

Sokol Ndoni

2013-02-01

Full Text Available Biofilms cause extensive damage to industrial settings. Thus, it is important to improve the existing techniques and develop new strategies to prevent bacterial biofilm formation. In the present study, we have prepared nanoporous polymer films from a self-assembled 1,2-polybutadiene-b-polydimethylsiloxane (1,2-PB-b-PDMS block copolymer via chemical cross-linking of the 1,2-PB block followed by quantitative removal of the PDMS block. Sodium dodecyl sulfate (SDS was loaded into the nanoporous 1,2-PB from aqueous solution. The SDS-loaded nanoporous polymer films were shown to block bacterial attachment in short-term (3 h and significantly reduce biofilm formation in long-term (1 week by gram-negative bacterium Escherichia coli. Tuning the thickness or surface morphology of the nanoporous polymer films allowed to extent the anti-biofilm capability.

Nanocomposites based on thermoplastic elastomers with functional basis of nano titanium dioxide

Energy Technology Data Exchange (ETDEWEB)

Yulovskaya, V. D.; Kuz’micheva, G. M., E-mail: galina-kuzmicheva@list.ru [Federal State Budget Educational Institution of Higher Education “Moscow Technological University” (Russian Federation); Klechkovskaya, V. V. [Russian Academy of Sciences, Shubnikov Institute of Crystallography (Russian Federation); Orekhov, A. S.; Zubavichus, Ya. V. [National Research Centre “Kurchatov Institute” (Russian Federation); Domoroshchina, E. N.; Shegay, A. V. [Federal State Budget Educational Institution of Higher Education “Moscow Technological University” (Russian Federation)

2016-03-15

Nanocomposites based on a thermoplastic elastomer (TPE) (low-density polyethylene (LDPE) and 1,2-polybutadiene in a ratio of 60/40) with functional titanium dioxide nanoparticles of different nature, TiO{sub 2}/TPE, have been prepared and investigated by a complex of methods (X-ray diffraction analysis using X-ray and synchrotron radiation beams, scanning electron microscopy, transmission electron microscopy, and X-ray energy-dispersive spectroscopy). The morphology of the composites is found to be somewhat different, depending on the TiO{sub 2} characteristics. It is revealed that nanocomposites with cellular or porous structures containing nano-TiO{sub 2} aggregates with a large specific surface and large sizes of crystallites and nanoparticles exhibit the best deformation‒strength and fatigue properties and stability to the effect of active media under conditions of ozone and vapor‒air aging.

Design criteria of launching rockets for burst aerial shells

Energy Technology Data Exchange (ETDEWEB)

Kuwahara, T.; Takishita, Y.; Onda, T.; Shibamoto, H.; Hosaya, F. [Hosaya Kako Co. Ltd (Japan); Kubota, N. [Mitsubishi Electric Corporation (Japan)

2000-04-01

Rocket motors attached to large-sized aerial shells are proposed to compensate for the increase in the lifting charge in the mortar and the thickness of the shell wall. The proposal is the result of an evaluation of the performance of solid propellants to provide information useful in designing launch rockets for large-size shells. The propellants composed of ammonium perchlorate and hydroxy-terminated polybutadiene were used to evaluate the ballistic characteristics such as the relationship between propellant mass and trajectories of shells and launch rockets. In order to obtain an optimum rocket design, the evaluation also included a study of the velocity and height of the rocket motor and shell separation. A launch rocket with a large-sized shell (84.5 cm in diameter) was designed to verify the effectiveness of this class of launch system. 2 refs., 6 figs.

Theoretical Prediction of the Heats of Formation, Densities, and Relative Sensitivities for 2-(azidomethyl)-2-nitropropane-1,3-diyl dinitrate (AMDNNM), bis- aminofurazan diamino-octanitro-azobenzene (BAFDAONAB), and bis-nitrofurazan diamino-octanitro-azobenzene (BNFDAONAB)

Science.gov (United States)

2016-04-01

estimation of the impact sensitivities has also been calculated. This report outlines the procedures used to generate this information and includes Cheetah ... Cheetah -predicted properties for AMDNNM, BAFDAONAB, and BNFDAONAB...AMDNNM as likely to be very sensitive. It would be of interest to compare the experimental with the predicted results for AMDNNM. We performed Cheetah

Coherent states field theory in supramolecular polymer physics

Science.gov (United States)

Fredrickson, Glenn H.; Delaney, Kris T.

2018-05-01

In 1970, Edwards and Freed presented an elegant representation of interacting branched polymers that resembles the coherent states (CS) formulation of second-quantized field theory. This CS polymer field theory has been largely overlooked during the intervening period in favor of more conventional "auxiliary field" (AF) interacting polymer representations that form the basis of modern self-consistent field theory (SCFT) and field-theoretic simulation approaches. Here we argue that the CS representation provides a simpler and computationally more efficient framework than the AF approach for broad classes of reversibly bonding polymers encountered in supramolecular polymer science. The CS formalism is reviewed, initially for a simple homopolymer solution, and then extended to supramolecular polymers capable of forming reversible linkages and networks. In the context of the Edwards model of a non-reacting homopolymer solution and one and two-component models of telechelic reacting polymers, we discuss the structure of CS mean-field theory, including the equivalence to SCFT, and show how weak-amplitude expansions (random phase approximations) can be readily developed without explicit enumeration of all reaction products in a mixture. We further illustrate how to analyze CS field theories beyond SCFT at the level of Gaussian field fluctuations and provide a perspective on direct numerical simulations using a recently developed complex Langevin technique.

Synthesis and Properties of Star HPMA Copolymer Nanocarriers Synthesised by RAFT Polymerisation Designed for Selective Anticancer Drug Delivery and Imaging.

Science.gov (United States)

Chytil, Petr; Koziolová, Eva; Janoušková, Olga; Kostka, Libor; Ulbrich, Karel; Etrych, Tomáš

2015-06-01

High-molecular-weight star polymer drug nanocarriers intended for the treatment and/or visualisation of solid tumours were synthesised, and their physico-chemical and preliminary in vitro biological properties were determined. The water-soluble star polymer carriers were prepared by the grafting of poly(amido amine) (PAMAM) dendrimers by hetero-telechelic N-(2-hydroxypropyl)methacrylamide (HPMA) copolymers, synthesised by the controlled radical Reversible Addition Fragmentation chain Transfer (RAFT) polymerisation. The well-defined star copolymers with Mw values ranging from 2 · 10(5) to 6 · 10(5) showing a low dispersity (approximately 1.2) were prepared in a high yield. A model anticancer drug, doxorubicin, was bound to the star polymer through a hydrazone bond, enabling the pH-controlled drug release in the target tumour tissue. The activated polymer arm ends of the star copolymer carrier enable a one-point attachment for the targeting ligands and/or a labelling moiety. In this study, the model TAMRA fluorescent dye was used to prove the feasibility of the polymer carrier visualisation by optical imaging in vitro. The tailor-made structure of the star polymer carriers should facilitate the synthesis of targeted polymer-drug conjugates, even polymer theranostics, for simultaneous tumour drug delivery and imaging. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Polypropylene /Aspen/ liquid polybutadienes composites: maximization of impact strength, tensile and modulus by statistical experimental design

Czech Academy of Sciences Publication Activity Database

Kokta, B. V.; Fortelný, Ivan; Kruliš, Zdeněk; Horák, Zdeněk; Michálková, Danuše

2005-01-01

Roč. 99, - (2005), s. 10-11 ISSN 0009-2770. [International Conference on Polymeric Materials in Automotive , Slovak Rubber Conference /17./. 10.5.2005-12.5.2005, Bratislava] Institutional research plan: CEZ:AV0Z40500505 Keywords : polypropylene * Aspen-PP composite Subject RIV: CD - Macromolecular Chemistry

Misturas BR/SBR: propriedades mecânicas em função do modo de preparo BR/SBR blends: mechanical properties as a function of the preparation mode

Directory of Open Access Journals (Sweden)

Adriana F. de Alcantara

2004-01-01

Full Text Available Misturas com borracha são freqüentemente usadas para se conseguir o balanço das propriedades desejadas e também, em alguns casos, a redução de custos. As misturas elastoméricas são normalmente sistemas multifásicos e a distribuição dos aditivos entre as fases não é necessariamente uniforme. Neste trabalho, o polibutadieno (BR foi misturado ao elastômero de butadieno-estireno (SBR na proporção 1:1 em peso. As composições foram preparadas utilizando um misturador de rolos, segundo a norma ASTM D3182, sendo que a incorporação dos aditivos foi realizada de quatro formas diferentes. Após a avaliação das propriedades reométricas e a vulcanização, foram estudadas as propriedades mecânicas para cada composição, avaliadas de acordo com as normas ASTM específicas para cada ensaio. Os resultados mostram que os diferentes modos de preparo de uma mesma formulação podem provocar mudança significativa nas propriedades mecânicas de misturas envolvendo essas duas borrachas. No caso das misturas BR/SBR estudadas, as propriedades apresentaram valores intermediários aos das borrachas isoladas.Rubber blends are frequently prepared to give a balance of the desired properties and, in some cases, reduction of cost as well. Elastomeric mixtures are usually multiphase systems and the dispersion of the additives may not be uniform throughout the phases. In this work, polybutadiene rubber (BR was mixed with polybutadiene-styrene rubber (SBR in a 50:50 w/w ratio. The compositions were prepared in a two-roll mill, according to ASTM D3182, and the incorporation of the ingredients was carried out according to four different modes. After the determination of the rheometric properties and the vulcanization of the compounds, mechanical properties were evaluated according to specific ASTM procedures. The results show that the mechanical properties may be altered by changing the procedure to prepare a given formulation. In the case of BR

SYNTHESIS OF STYRENE-BUTADIENE STATISTIC COPOLYMERS CONTAINING MAGNESIUM INITIATOR

Directory of Open Access Journals (Sweden)

A. V. Firsova

2015-01-01

Full Text Available The article discusses the use of organomagnesium initiators in the synthesis of styrene-butadiene random copolymer (SBR obtained solution polymerization and their influence on the properties of rubber. Selected organic magnesium dialkyl initiator is combined with a modifier, which is a mixed alkoxide of an alkali and alkaline earth metals, which allows to control the micr ostructure of the diene polymer and its molecular weight characteristics. Alcohol derivatives selected high-boiling alcohols tetra (hydroxypropyl ethylenediamine (lapromol 294 and tetrahydrofurfuryl alcohol (TGFS. Selection of high-boiling alcohols due to the fact that the destruction of alkoxide with aqueous polymer degassing they do not fall into the return solvent and almost fall into the exact water. The metal components of alkoxides are lithium, sodium, potassium, magnesium and calcium. The resulting solutions are stable when stored modifier t hroughout the year even at -40 °C. The scheme of obtaining the new catalyst systems based organomagnesium and alcoxide of alkali and alkaline earth metals, which yields as functionalized SBR with a statistical and a distribution block of butadiene and styrene was developed. The process of copolymerization with styrene to butadiene organomagnesium initiators as using an organolithium compound (n-butyllithium was carried out, and without it. Found that the addition of n-butyllithium in the reaction mixture leads to a sharp increase in the rate of reaction. The results of studies of the effect of composition of the initiator system on the structure of diene polymers. It was revealed that a mixed initiator system affords a high conversion of monomers (to 90 % in 1 hour 1,2-polybutadiene content increased to 60 %. The process of polymerization of only a mixture of organomagnesium initiators and alcoxide of alkali and alkaline earth metals are not actively proceeds, conversion of the monomers reaches to 90 % in 4 hours, the microstructure

Colorless triphenylamine-based aliphatic thermoset epoxy for multicolored and near-infrared electrochromic applications.

Science.gov (United States)

Chuang, Ya-Wen; Yen, Hung-Ju; Wu, Jia-Hao; Liou, Guey-Sheng

2014-03-12

In this study, two novel colorless thermoset epoxy resins with anodically electrochromism were prepared from the thermal curing of two triphenylamine-based diamine monomers, 4,4'-diamino-4″-methoxytriphenylamine (1) and N,N'-bis(4-aminophenyl)-N,N'-di(4-methoxylphenyl)-1,4-phenylenediamine (2) with aliphatic epoxy triglycidyl isocyanurate, respectively. The resulting thermoset epoxy resins showed excellent softening temperature (Ts, 270 and 280 °C) due to the rigid structure and highly crosslinking density. In addition, novel colorless epoxy resin films revealed good reversible electrochemical oxidation and interesting multi-electrochromic behavior with high contrast ratio both in visible and near-infrared regions. The aliphatic thermoset epoxy resins also exhibited high transparency in visible region as colorless and great potential for practical electrochromic applications.

Thermal and Optical Properties of New Poly(amide-imide)/Nanocomposite Reinforced by Layer Silicate Containing Diphenyl Ether Moieties

Science.gov (United States)

Faghihi, Khalil; Faramarzi, Ellahe; Shabanian, Meisam

2011-04-01

New poly(amide-imide)-montmorillonite reinforced nanocomposites containing Bis(4-N-trimellitylimido) diphenyl ether moiety in the main chain were synthesized by a convenient solution intercalation technique. Poly(amide-imide) (PAI) 4 was synthesized by the direct polycondensation reaction of Bis(4-N-trimellitylimido) diphenyl ether 3 with 4,4'-diamino diphenyl ether 2 in the presence of triphenyl phosphite (TPP), CaCl2, pyridine and N-methyl-2-pyrrolidone (NMP). Morphology and structure of the resulting PAI-nanocomposite films 4a and 4b with 10 and 20 mass% silicate particles respectively, were characterized by FT-IR spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The properties of nanocomposites films were investigated by using Uv-vis spectroscopy, thermogravimetric analysis (TGA) and water uptake measurements.

SYNTHESIS AND CHARACTERISTIC OF 2-HYDROXYPROPYLENE- 1,3-DIAMINETETRAACETOGERMANATES OF SOME s-METALS

Directory of Open Access Journals (Sweden)

E. E. Marzinko

2014-12-01

Full Text Available Differentmetal complexes of germanium (IV and s-metals (Mg, Ca, Sr, Ba with 2-hydroxypropylene-1,3-diamino-N,N,NI,NI-tetraacetic acid (Н5 Hpdta are obtained for the first time and characterized by methods of elementary and X-Ray powder diffraction analysis, thermogravimetry, IR-specroscopy. By results of research by set of physical and chemical methods it is established, that obtained 2-hydroxypropylene-1,3-diaminetetraacetogermanates are complexes of cationic-anionic type: M[Ge(Hpdta(ОН(Н2О]·nH2O, where M = Mg, n=9 (I; Ca, n=7 (II, Sr, n=7 (III; Ba, n=8 (IV. The scheme of structure of compounds I-IV is offered.

High-performance liquid chromatographic determination of selenium in coal after derivatization to 2,1,3-benzoselenadiazoles

Energy Technology Data Exchange (ETDEWEB)

Khuhawar, M.Y.; Bozdar, R.B.; Babar, M.A. (Sindh University, Jamshoro (Pakistan). Inst. of Chemistry)

1992-11-01

High-performance liquid chromatography was examined for the determination of selenium after derivatization to 2,1,3-benzoselenadiazoles using 1,2-diaminobenzene, 1,2-diamino-4-nitrobenzene (NDAB), 2,3-diaminonaphthalene and 3,3-diaminobenzidine as derivatizing agents. Elution was carried out using a mixture of chloroform and hexane, with ultraviolet spectrophotometric detection. The 2,1,3-benzoselenadiazoles were extracted into toluene. Linear calibrations were obtained for 0-4[mu]g of selenium in 10 cm[sup 3] of solution and the detection limits were 20-50 ng of selenium in 10 cm[sup 3] of solution. The method was applied to the determination of selenium in coal samples and a shampoo using NDAB as the derivatizing reagent in acidic solution.

Chemical characterization and toxicologic evaluation of airborne mixtures: chemical characterization of combusted inventory red and violet smoke mixes

International Nuclear Information System (INIS)

Rubin, I.B.; Buchanan, M.V.; Moneyhun, J.H.

1982-10-01

Red and violet smoke grenades (Grenade, Hand, Smoke, M18) were combusted within canvas tents and the combustion products were sampled and analyzed. Uncombusted red and violet smoke mixes from the same lots used to fill the combusted grenades were also analyzed. Approximately ten percent of the major dye component of the red smoke mix, methylaminoanthraquinone (MAA) was converted to aminoanthraquinones (1-AA and 2-AA). The violet smoke mix was formulated to contain 1,4-diamino-2,3-dihydroanthraquinone (DAA) and MAA. Upon combustion the DAA was converted almost completely to diaminoanthraquinone (DAA) which was a minor constituent of the uncombusted mix. As in the combusted red smoke mix, it was found that MAA was partially converted to aminoanthraquinones

Determination of stability constants of aminoglycoside antibiotics with their metal complexes

Science.gov (United States)

Tiwow, Vanny M. A.

2014-03-01

One group of aminoglycoside antibiotics contains aminosugars. The aminosugar neomycin B with its derivate product neamine (2-Deoxy-4-0-(2,6-diamino-2,6-dideoxy-α-D-glucopyranosyl)-D-Streptamine) was identified as a free ligands and metal complexes. In particular, the stability constants of metal complexes by potentiometric titration techniques were investigated. Our previous study had determined the acid dissociation constants of these aminosugars with few metal complexes in fair depth. In this work, the complexation of two pyridine-containing amino alcohols and an amino sugar (neamine) have been measured potentiometrically. For instance, the stability constant of copper(II) complexation were determine and the model system generated an excellent fit. Stability constants with several metals have been determined and will be reported.

Solid-phase route to Fmoc-protected cationic amino acid building blocks

DEFF Research Database (Denmark)

Clausen, Jacob Dahlqvist; Linderoth, Lars; Nielsen, Hanne Mørck

2012-01-01

Diamino acids are commonly found in bioactive compounds, yet only few are commercially available as building blocks for solid-phase peptide synthesis. In the present work a convenient, inexpensive route to multiple-charged amino acid building blocks with varying degree of hydrophobicity...... was developed. A versatile solid-phase protocol leading to selectively protected amino alcohol intermediates was followed by oxidation to yield the desired di- or polycationic amino acid building blocks in gram-scale amounts. The synthetic sequence comprises loading of (S)-1-(p-nosyl)aziridine-2-methanol onto...... of simple neutral amino acids as well as analogs displaying high bulkiness or polycationic side chains was prepared. Two building blocks were incorporated into peptide sequences using microwave-assisted solid-phase peptide synthesis confirming their general utility....

Pulse radiolytic one-electron reduction of 1,4-amino and hydroxy disubstituted 9,10-anthraquinones

International Nuclear Information System (INIS)

Pal, H.; Palit, D.K.; Mukherjee, T.; Mittal, J.P.

1992-01-01

The semiquinone radicals produced by one-electron reduction of 1-amino-4-hydroxy-9,10-anthraquinone and 1,4-diamino-9,10-anthraquinone have been studied in aqueous-organic mixed solvent using pulse radiolysis technique. Spectroscopic characteristics, kinetic characteristics of formation and decay, acid/base behaviour and redox characteristics of the semiquinones have been investigated and compared with those of some similar systems studied earlier. It has been shown that the variation of the disproportionation equilibria involving the reduced semiquinone radicals, the parent quinone and the fully reduced hydroquinone with pH of the solutions follow a similar trend as observed in the case of other dihydroxy quinones. Stability of the semiquinones over a broad pH range and their thermodynamic properties have been correlated. (Author)

Synthesis and antimicrobial activity of chromone-linked 2-pyridone fused with 1,2,4-triazoles, 1,2,4-triazines and 1,2,4-triazepines ring systems

International Nuclear Information System (INIS)

Ali, Tarik El-Sayed; Ibrahim, Magdy Ahmed

2010-01-01

Three series of novel fused nitrogen heterocyclic systems such as 1,2,4-triazolo[1,5-a ] pyridines (5-7 and 9), pyrido[1,2-b][1,2,4]triazines (10, 11, 13 and 15), and pyrido[1,2-b][1,2,4]triazepines (17, 18, 20 and 22) linked with a chromone moiety were synthesized from the key intermediate 1,6-diamino-(6-chloro-4-oxo-4H-chromen-3-yl)-2-oxo-1,2-dihydropyridine-3,5- dicarbonitrile (4) with some electrophilic reagents. The structures of the novel compounds were established by elemental analyses and spectral data. All the products were also screened in vitro for their antimicrobial activity. Compounds 7, 9 and 15 showed the highest activities when compared with the reference drugs. (author)

Primary photochemical processes for Pt(iv) diazido complexes prospective in photodynamic therapy of tumors.

Science.gov (United States)

Shushakov, Anton A; Pozdnyakov, Ivan P; Grivin, Vjacheslav P; Plyusnin, Victor F; Vasilchenko, Danila B; Zadesenets, Andrei V; Melnikov, Alexei A; Chekalin, Sergey V; Glebov, Evgeni M

2017-07-25

Diazide diamino complexes of Pt(iv) are considered as prospective prodrugs in oxygen-free photodynamic therapy (PDT). Primary photophysical and photochemical processes for cis,trans,cis-[Pt(N 3 ) 2 (OH) 2 (NH 3 ) 2 ] and trans,trans,trans-[Pt(N 3 ) 2 (OH) 2 (NH 3 ) 2 ] complexes were studied by means of stationary photolysis, nanosecond laser flash photolysis and ultrafast kinetic spectroscopy. The process of photolysis is multistage. The first stage is the photosubstitution of an azide ligand to a water molecule. This process was shown to be a chain reaction involving redox stages. Pt(iv) and Pt(iii) intermediates responsible for the chain propagation were recorded using ultrafast kinetic spectroscopy and nanosecond laser flash photolysis. The mechanism of photosubstitution is proposed.

Differential scanning calorimetric study of HTPB based composite propellants in presence of nano ferric oxide

Energy Technology Data Exchange (ETDEWEB)

Patil, Prajakta R.; Krishnamurthy, V.N.; Joshi, Satyawati S. [Department of Chemistry, University of Pune, Pune 411007 (India)

2006-12-15

A comparative study of the thermal decomposition of ammonium perchlorate (AP)/hydroxy terminated polybutadiene (HTPB) based composite propellants has been carried out in presence and absence of nano iron oxide at different heating rates in a dynamic nitrogen atmosphere using differential scanning calorimetry. The pronounced effect was a lowering of the high temperature decomposition by 49 C. A higher heat release up to 40% was observed in presence of nano ferric oxide (3.5 nm). The kinetic parameters were evaluated using the Kissinger method. The increase of the rate constant in the catalyzed propellant confirmed the enhancement of the catalytic activity of ammonium perchlorate. The scanning electron micrographs of nano Fe{sub 2}O{sub 3} incorporated in HTPB revealed a well-separated characteristic necklace-like structure of {alpha}-Fe{sub 2}O{sub 3} particles at high magnification. (Abstract Copyright [2006], Wiley Periodicals, Inc.)

Radiation luminescence of polymers - emission behaviour of aromatic compounds incorporated in synthetic rubbers

International Nuclear Information System (INIS)

Kawanishi, Shunichi; Hagiwara, Miyuki

1986-01-01

For a deep understanding of a radiation protection mechanism of some aromatic compounds on synthetic polymers, their optical emission behavior under electron irradiation was studied. The fluorescence light was led out of an irradiation room through a wave guide and detected by a photomultiplier so that less noisy spectrum was obtained. Acenaphthene or acenaphthylene was added to the synthetic rubbers such as ethylene propylene diene terpolymer, styrene butadiene rubber and cis-1,4-polybutadiene. The intensities of optical emission induced by electron beams changed from polymer to polymer, while those by ultraviolet lights were independent of the kind of polymers. The dependence of emission intensity on polymers under electron irradiation was estimated to show the fact that the radiation excited energy transfers occur from the polymer matrix to the additives and that an efficiency of the energy transfer is dependent on kinds of polymers. (author)

Shear viscosity of phase-separating polymer blends with viscous asymmetry

International Nuclear Information System (INIS)

Jeon, H. S.; Hobbie, E. K.

2001-01-01

Rheo-optical measurements of phase separating polymer mixtures under simple shear flow have been used to investigate the influence of domain morphology on the viscosity of emulsionlike polymer blends, in which the morphology under weak shear is droplets of one coexisting phase dispersed in a matrix of the second. The structure and viscosity of low-molecular-weight polybutadiene and polyisoprene mixtures, phase separated by quenching to a temperature inside the coexistence region of the phase diagram, were measured as a function of shear rate and composition. In the weak shear regime, the data are in qualitative agreement with an effective medium model for non-dilute suspensions of slightly deformed interacting droplets. In the strong shear regime, where a stringlike pattern appears en route to a shear-homogenized state, the data are in qualitative agreement with a simple model that accounts for viscous asymmetry in the components

Evaluation of di-amino phenol substituted EDTA for use in radiolabelling proteins with 64Cu

International Nuclear Information System (INIS)

Schmidt, P.F.; Smith, S.V.; DiBartolo, N.M.

1996-01-01

This study involves a high yielding synthesis of a novel di-amino-phenol substituted EDTA (DAHA-EDTA) ligand and its radiolabelling chemistry with 64 Cu produced at the National Medical Cyclotron (NMC). High activity levels (up to 59.2 GBq EOB) of 64 Cu is co-produced during the production of 67 Ga from enriched 68 Zn. Waste eluent from the NMC 67 Ga production was evaporated to dryness and found to contain by products such as 57 Ni, 57 Co, 64 Cu, 67 Cu and 55 Co. A new method involving low acid concentration aqueous/organic mixtures with an anion exchange (AG 1-X8, BioRad) have been used to isolate the carrier-free 64 Cu. The specific activity of the 64 Cu (5 x 10 14 Bq/g) was found to be higher than that produce by Australian radioisotopes (ARI). The synthesis of the ligand involves the refluxing of EDTA anhydride in the presence of 4-nitro-2-amino-phenol in acetonitrile to produce the di-nitro derivative (DNHA- EDTA) in > 95% yield. The DNHA-EDTA is then reduced in the presence of activated palladium charcoal with sodium borohydride under an inert atmosphere at room temperature. The reaction mixture was acidified and the catalyst removed to obtain the final product, DAHA-EDTA. Labelling of proteins (B72.3, DD-3B6/22 and streptavidin) has been achieved with the DAHA-EDTA ligand. The reaction mixture is left to incubate for 1 h at 37 deg C and radiolabelled protein is then isolated using size exclusion chromatography

Strong Selective Adsorption of Polymers.

Science.gov (United States)

Ge, Ting; Rubinstein, Michael

2015-06-09

A scaling theory is developed for selective adsorption of polymers induced by the strong binding between specific monomers and complementary surface adsorption sites. By "selective" we mean specific attraction between a subset of all monomers, called "sticky", and a subset of surface sites, called "adsorption sites". We demonstrate that, in addition to the expected dependence on the polymer volume fraction ϕ bulk in the bulk solution, selective adsorption strongly depends on the ratio between two characteristic length scales, the root-mean-square distance l between neighboring sticky monomers along the polymer, and the average distance d between neighboring surface adsorption sites. The role of the ratio l / d arises from the fact that a polymer needs to deform to enable the spatial commensurability between its sticky monomers and the surface adsorption sites for selective adsorption. We study strong selective adsorption of both telechelic polymers with two end monomers being sticky and multisticker polymers with many sticky monomers between sticky ends. For telechelic polymers, we identify four adsorption regimes at l / d 1, we expect that the adsorption layer at exponentially low ϕ bulk consists of separated unstretched loops, while as ϕ bulk increases the layer crosses over to a brush of extended loops with a second layer of weakly overlapping tails. For multisticker chains, in the limit of exponentially low ϕ bulk , adsorbed polymers are well separated from each other. As l / d increases, the conformation of an individual polymer changes from a single-end-adsorbed "mushroom" to a random walk of loops. For high ϕ bulk , adsorbed polymers at small l / d are mushrooms that cover all the adsorption sites. At sufficiently large l / d , adsorbed multisticker polymers strongly overlap. We anticipate the formation of a self-similar carpet and with increasing l / d a two-layer structure with a brush of loops covered by a self-similar carpet. As l / d exceeds the

Formamidopyrimidines in DNA: mechanisms of formation, repair, and biological effects.

Science.gov (United States)

Dizdaroglu, Miral; Kirkali, Güldal; Jaruga, Pawel

2008-12-15

Oxidatively induced damage to DNA results in a plethora of lesions comprising modified bases and sugars, DNA-protein cross-links, tandem lesions, strand breaks, and clustered lesions. Formamidopyrimidines, 4,6-diamino-5-formamidopyrimidine (FapyAde) and 2,6-diamino-4-hydroxy-5-formamidopyrimidine (FapyGua), are among the major lesions generated in DNA by hydroxyl radical attack, UV radiation, or photosensitization under numerous in vitro and in vivo conditions. They are formed by one-electron reduction of C8-OH-adduct radicals of purines and thus have a common precursor with 8-hydroxypurines generated upon one-electron oxidation. Methodologies using mass spectrometry exist to accurately measure FapyAde and FapyGua in vitro and in vivo. Formamidopyrimidines are repaired by base excision repair. Numerous prokaryotic and eukaryotic DNA glycosylases are highly specific for removal of these lesions from DNA in the first step of this repair pathway, indicating their biological importance. FapyAde and FapyGua are bypassed by DNA polymerases with the insertion of the wrong intact base opposite them, leading to mutagenesis. In mammalian cells, the mutagenicity of FapyGua exceeds that of 8-hydroxyguanine, which is thought to be the most mutagenic of the oxidatively induced lesions in DNA. The background and formation levels of the former in vitro and in vivo equal or exceed those of the latter under various conditions. FapyAde and FapyGua exist in living cells at significant background levels and are abundantly generated upon exposure to oxidative stress. Mice lacking the genes that encode specific DNA glycosylases accumulate these lesions in different organs and, in some cases, exhibit a series of pathological conditions including metabolic syndrome and cancer. Animals exposed to environmental toxins accumulate formamidopyrimidines in their organs. Here, we extensively review the mechanisms of formation, measurement, repair, and biological effects of formamidopyrimidines

Tunable Robust pacs-MOFs: a Platform for Systematic Enhancement of the C2H2 Uptake and C2H2/C2H4 Separation Performance.

Science.gov (United States)

Chen, Di-Ming; Sun, Chun-Xiao; Zhang, Nan-Nan; Si, Huan-Huan; Liu, Chun-Sen; Du, Miao

2018-03-05

As a modulatable class of porous crystalline materials, metal-organic frameworks (MOFs) have gained intensive research attention in the domain of gas storage and separation. In this study, we report on the synthesis and gas adsorption properties of two robust MOFs with the general formula [Co 3 (μ 3 -OH)(cpt) 3 Co 3 (μ 3 -OH)(L) 3 (H 2 O) 9 ](NO 3 ) 4 (guests) n [L = 3-amino-1,2,4-triazole (1) and 3,5-diamino-1,2,4-triazole (2); Hcpt = 4-(4-carboxyphenyl)-1,2,4-triazole], which show the same pacs topology. Both MOFs are isostructural to each other and show MIL-88-type frameworks whose pore spaces are partitioned by different functionlized trinuclear 1,2,4-triazolate-based clusters. The similar framework components with different amounts of functional groups make them an ideal platform to permit a systematic gas sorption/separation study to evaluate the effects of distinctive parameters on the C 2 H 2 uptake and separation performance. Because of the presence of additional amido groups, the MOF 2 equipped with a datz-based cluster (Hdatz = 3,5-diamino-1,2,4-triazole) shows a much improved C 2 H 2 uptake capacity and separation performance over that of the MOF 1 equipped with atz-based clusters (Hatz = 3-amino-1,2,4-triazole), although the surface area of the MOF 1 is almost twice than that of the MOF 2. Moreover, the high density of open metal sites, abundant free amido groups, and charged framework give the MOF 2 an excellent C 2 H 2 separation performance, with ideal adsorbed solution theory selectivity values reaching up to 11.5 and 13 for C 2 H 2 /C 2 H 4 (1:99) and C 2 H 2 /CO 2 (50:50) at 298 K and 1 bar, showing potential for use in natural gas purification.

Histamine intolerance as a cause of chronic digestive complaints in pediatric patients

Directory of Open Access Journals (Sweden)

Antonio Rosell-Camps

2013-04-01

Full Text Available Introduction: histamine intolerance (HI is a poorly described disease in gastroenterology that may present with predominant digestive complaints. The goals of this study include a report of two cases diagnosed in a pediatric gastroenterology clinic. Material and methods: observational, retrospective study of patients diagnosed with HI from September 2010 to December 2011 at the pediatric gastroenterology clinic of a tertiary hospital. They were deemed to have a diagnosis of HI in the presence of 2 or more characteristic digestive complaints, decreased diamino oxidase (DAO levels and/or response to a low histamine diet with negative IgE-mediated food allergy tests. Results: sixteen patients were diagnosed. Males predominated versus females (11/5. Mean age at symptom onset was 4 years (6 months vs. 13 years and 6 months and mean age at diagnosis was 6 years and 6 months (17 months vs. 13 years and 11 months, with an interval of 2 years and 1 month between symptom onset and diagnosis (5 months vs. 4 years. Predominant symptoms included diffuse abdominal pain (16/16, intermittent diarrhea (10/16, headache (5/16, intermittent vomiting (4/16, and skin rash (2/16. The diagnosis was established by measuring plasma diamino oxidase levels, which were below 10 kU/L (normal > 10 kU/L in 14 cases, and symptom clearance on initiating a low histamine diet. In two patients DAO levels were above 10 kU/L but responded to diet. Treatment was based on a diet low in histamine-contaning food, and antihistamines H1 y H2 had to be added for two cases. Conclusions: histamine intolerance is a little known disease with a potentially relevant incidence. Predominant complaints include diffuse abdominal pain, diarrhea, headache, and chronic intermittent vomiting. Its diagnosis is based on clinical suspicion, plasma DAO measurement, and response to a low histamine diet. Management with the latter provides immediate improvement.

Structure-function relationships of new lipids designed for DNA transfection.

Science.gov (United States)

Dittrich, Matthias; Heinze, Martin; Wölk, Christian; Funari, Sergio S; Dobner, Bodo; Möhwald, Helmuth; Brezesinski, Gerald

2011-08-22

Cationic liposome/DNA complexes can be used as nonviral vectors for direct delivery of DNA-based biopharmaceuticals to damaged cells and tissues. To obtain more effective and safer liposome-based gene transfection systems, two cationic lipids with identical head groups but different chain structures are investigated with respect to their in vitro gene-transfer activity, their cell-damaging characteristics, and their physicochemical properties. The gene-transfer activities of the two lipids are very different. Differential scanning calorimetry and synchrotron small- and wide-angle X-ray scattering give valuable structural insight. A subgel-like structure with high packing density and high phase-transition temperature from gel to liquid-crystalline state are found for lipid 7 (N'-2-[(2,6-diamino-1-oxohexyl)amino]ethyl-2,N-bis(hexadecyl)propanediamide) containing two saturated chains. Additionally, an ordered head-group lattice based on formation of a hydrogen-bond network is present. In contrast, lipid 8 (N'-2-[(2,6-diamino-1-oxohexyl)amino]ethyl-2-hexadecyl-N-[(9Z)-octadec-9-enyl]propanediamide) with one unsaturated and one saturated chain shows a lower phase-transition temperature and a reduced packing density. These properties enhance incorporation of the helper lipid cholesterol needed for gene transfection. Both lipids, either pure or in mixtures with cholesterol, form lamellar phases, which are preserved after addition of DNA. However, the system separates into phases containing DNA and phases without DNA. On increasing the temperature, DNA is released and only a lipid phase without intercalated DNA strands is observed. The conversion temperatures are very different in the two systems studied. The important parameter seems to be the charge density of the lipid membranes, which is a result of different solubility of cholesterol in the two lipid membranes. Therefore, different binding affinities of the DNA to the lipid mixtures are achieved. Copyright © 2011

Making a robust carbon-cobalt(III) bond

DEFF Research Database (Denmark)

Larsen, Erik; Madsen, Anders Østergaard; Kofod, Pauli

2009-01-01

The coordination ion with a well-characterized carbon-cobalt(III) bond, the (1,4,7-triazacyclononane)(1,6-diamino-3-thia-4-hexanido)cobalt(III) dication, [Co(tacn)(C-aeaps)](2+) (aeaps, for aminoethylaminopropylsulfide), has been reacted with iodomethane, and the S-methyl thionium derivative has...... been isolated. The crystal structure of the resulting [Co(tacn)(C-aeaps-SCH(3))]Br(3) x 3 H(2)O at 122 K has been determined by X-ray diffraction techniques to verify the structure. The crystal structure determination shows that the carbon-cobalt bond length is even shorter (2.001(4) A) than in [Co......(tacn)(C-aeaps)](2+) participates in bonding to cobalt(III), having implications for the transformation between the carbon- and sulfur-bound forms of the aeaps ligand....

Crystal structure of {2,2′-[N,N′-bis(pyridin-2-ylmethylcyclohexane-trans-1,2-diyldi(nitrilo]diacetato}cobalt(III hexafluoridophosphate

Directory of Open Access Journals (Sweden)

Craig C. McLauchlan

2015-04-01

Full Text Available The title compound [Co(C22H26N4O4]PF6, commonly known as [Co(bpcd]PF6, where bpcd2− is derived from the historical ligand name N,N′-bis(2-pyridylmethyl-trans-1,2-diaminocyclohexane-N,N′-diacetate, crystallized by slow evaporation of a saturated acetonitrile solution in air. The cation of the hexafluoridophosphate salt has the CoIII atom in a distorted octahedral coordination geometry provided by an N4O2 donor atom set. The acetate groups, which are oriented trans with respect to each other, exhibit monodentate coordination whereas the pyridyl N atoms are coordinating in a cis configuration. The geometry of the cation is compared to the geometries of other diamino diacetate complexes with CoIII.

Eco-friendly synthesis of 4-4-diaminodiphenylurea, a dye intermediate and direct dyes derived from it

International Nuclear Information System (INIS)

Amjad, R.; Khan, S.R.; Naeem, M.; Sohaib, M.; Munawar, M.A.

2011-01-01

A rapid, environmental friendly and highly efficient method for the synthesis of 4-4/sup '/-diaminodiphenyl- urea and direct dyes derived form it has been reported. The reported method is environmentally friendly, as it doesn't involve the usage of environmentally hazardous material like phosgene and tri phosgene. Novel azo dyes have been prepared by the coupling of 4-4/sup '/-Diamino diphenylurea with various couplers. Structure elucidation of the synthesized dyes was carried out by IR, NMR, Elemental analysis, and confirmation was made by Mass Spectrometry. The dyeing performance of these dyes was assessed on cotton fabric. The dye bath exhaustion, sublimation and fastness properties were also determined. The dyed fabric showed moderate to good light fastness and very good to excellent fastness properties for washing, rubbing, perspiration, and sublimation. (author)

Optical and Thermal Behaviors of Polyamide-Layered Silicate Nanocomposites Based on 4,4'-Azodibenzoic Acid by Solution Intercalation Technique

Science.gov (United States)

Faghihi, Khalil; Shabanian, Meisam

2011-04-01

Two new samples of polyamide-montmorillonite reinforced nanocomposites based on 4,4'-azodibenzoic acid were prepared by a convenient solution intercalation technique. Polyamide (PA) 4 as a source of polymer matrix was synthesized by the direct polycondensation reaction of 4,4'-azodibenzoic acid 2 with 4,4'-diamino diphenyl sulfone 3 in the presence of triphenyl phosphate (TPP), CaCl2, pyridine and N-methyl-2-pyrrolidone (NMP). Morphology and structure of the resulting PA-nanocomposite films 4a and 4b with 10 and 20% silicate particles were characterized by FTIR spectroscopy, X-ray diffraction (XRD) and scanning electron microscopy (SEM). The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nanocomposite films were investigated by using Uv-vis spectroscopy, thermogravimetric analysis (TGA) and water uptake measurements.

New Poly(amide-imide)/Nanocomposites Reinforced Silicate Nanoparticles Based on N-pyromellitimido-L-phenyl Alanine Containing Ether Moieties

Science.gov (United States)

Faghihi, Khalil; Shabanian, Meisam; Dadfar, Ehsan

2012-02-01

A series of Poly(amide-imide)/montmorillonite nanocomposites containing N-pyromellitimido-L-phenyl alanine moiety in the main chain were synthesized by a convenient solution intercalation technique. Poly(amide-imide) (PAI) 5 as a source of polymer matrix was synthesized by the direct polycondensation reaction of N-pyromellitimido-L-phenyl alanine 3 with 4,4'-diamino diphenyl ether 4 in the presence of triphenyl phosphite (TPP), CaCl2, pyridine and N-methyl-2-pyrrolidone (NMP). The resulting nanocomposite films were characterized by Fourier transform infrared spectra (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA). The results showed that organo-modified clay was dispersed homogeneously in PAI matrix. TGA indicated an enhancement of thermal stability of new nanocomposites compared with the pure polymer.

Asymmetric synthesis of α-amino acids via homologation of Ni(II) complexes of glycine Schiff bases. Part 2: aldol, Mannich addition reactions, deracemization and (S) to (R) interconversion of α-amino acids.

Science.gov (United States)

Sorochinsky, Alexander E; Aceña, José Luis; Moriwaki, Hiroki; Sato, Tatsunori; Soloshonok, Vadim

2013-11-01

This review provides a comprehensive treatment of literature data dealing with asymmetric synthesis of α-amino-β-hydroxy and α,β-diamino acids via homologation of chiral Ni(II) complexes of glycine Schiff bases using aldol and Mannich-type reactions. These reactions proceed with synthetically useful chemical yields and thermodynamically controlled stereoselectivity and allow direct introduction of two stereogenic centers in a single operation with predictable stereochemical outcome. Furthermore, new application of Ni(II) complexes of α-amino acids Schiff bases for deracemization of racemic α-amino acids and (S) to (R) interconversion providing additional synthetic opportunities for preparation of enantiomerically pure α-amino acids, is also reviewed. Origin of observed diastereo-/enantioselectivity in the aldol, Mannich-type and deracemization reactions, generality and limitations of these methodologies are critically discussed.

New Aptes Cross-linked Polymers from Poly(ethylene oxide)s and Cyanuric Chloride for Lithium Batteries

Science.gov (United States)

Tigelaar, Dean M.; Meador, Mary Ann B.; Kinder, James D.; Bennett, William R.

2005-01-01

A new series of polymer electrolytes for use as membranes for lithium batteries are described. Electrolytes were made by polymerization between cyanuric chloride and diamino-terminated poly(ethylene oxide)s, followed by cross-linking via a sol-gel process. Thermal analysis and lithium conductivity of freestanding polymer films were studied. The effects of several variables on conductivity were investigated, such as length of backbone PEO chain, length of branching PEO chain, extent of branching, extent of cross-linking, salt content, and salt counterion. Polymer films with the highest percentage of PEO were found to be the most conductive, with a maximum lithium conductivity of 3.9 x 10(exp -5) S/cm at 25 C. Addition of plasticizer to the dry polymers increased conductivity by an order of magnitude.

Cross-linked PAN-based thin-film composite membranes for non-aqueous nanofiltration

KAUST Repository

Pérez-Manríquez, Liliana

2015-01-01

A new approach on the development of cross-linked PAN based thin film composite (TFC) membranes for non-aqueous application is presented in this work. Polypropylene backed neat PAN membranes fabricated by phase inversion process were cross-linked with hydrazine to get excellent solvent stability toward dimethylformamide (DMF). By interfacial polymerization a selective polyamide active layer was coated over the cross-linked PAN using N,N′-diamino piperazine (DAP) and trimesoyl chloride (TMC) as monomers. Permeation and molecular weight cut off (MWCO) experiments using various dyes were done to evaluate the performance of the membranes. Membranes developed by such method show excellent solvent stability toward DMF with a permeance of 1.7 L/m2 h bar and a molecular weight cut-off of less than 600 Da.

Reactions of Cp2MCl2 (M=Ti or Zr with Imine-Oxime Ligands. Formation of Metallacycles

Directory of Open Access Journals (Sweden)

C. Tripathi

2005-07-01

Full Text Available The reactions of bis(cyclopentadienyltitanium(IV/zirconium(IV dichloridewith a series of imine-oxime ligands (LH2, derived by condensing benzil-α-monoxime and2-phenylenediamine, 4-phenylenediamine, 4-methyl-2-phenylenediamine, 2,6-diamino-pyridine, have been studied in anhydrous tetrahydrofuran in the presence of base andmetallocycles of the [Cp2M(L] (M=Ti or Zr type have been isolated. Tentative structureshave been proposed for the products based on elemental analysis, electrical conductance andspectral (electronic, IR and 1H-NMR data. Proton NMR spectra indicate that on the NMRtime scale there is rapid rotation of the cyclopentadienyl ring around the metal-ring axis at25oC. Studies were conducted to assess the growth inhibiting potential of the complexessynthesized and the ligands against various bacterial strains.

3D Graphene Functionalized by Covalent Organic Framework Thin Film as Capacitive Electrode in Alkaline Media.

Science.gov (United States)

Zha, Zeqi; Xu, Lirong; Wang, Zhikui; Li, Xiaoguang; Pan, Qinmin; Hu, Pingan; Lei, Shengbin

2015-08-19

To harness the electroactivity of anthraquinone as an electrode material, a great recent effort have been invested to composite anthraquinone with carbon materials to improve the conductivity. Here we report on a noncovalent way to modify three-dimensional graphene with anthraquinone moieties through on-surface synthesis of two-dimensional covalent organic frameworks. We incorporate 2,6-diamino-anthraquinone moieties into COF through Schiff-base reaction with benzene-1,3,5-tricarbaldehyde. The synthesized COF -graphene composite exhibits large specific capacitance of 31.7 mF/cm(2). Long-term galvanostatic charge/discharge cycling experiments revealed a decrease of capacitance, which was attributed to the loss of COF materials and electrostatic repulsion accumulated during charge-discharge circles which result in the poor electrical conductivity between 2D COF layers.

Tetrahydrobiopterin precursor sepiapterin provides protection against neurotoxicity of 1-methyl-4-phenylpyridinium in nigral slice cultures

DEFF Research Database (Denmark)

Madsen, Jakob Torp; Jansen, Pernille; Hesslinger, Christian

2003-01-01

Complex-I inhibition and oxidative processes have been implicated in the loss of nigral dopamine neurones in Parkinson's disease and the toxicity of MPTP and its metabolite MPP+. Tetrahydrobiopterin, an essential cofactor for tyrosine hydroxylase, may act as an antioxidant in dopaminergic neurones...... and protects against the toxic consequences of glutathione depletion. Here we studied the effects of manipulating tetrahydrobiopterin levels on MPP+ toxicity in organotypic, rat ventral mesencephalic slice cultures. In cultures exposed to 30 micro m MPP+ for 2 days, followed by 8 days 'recovery' in control...... medium, we measured dopamine and its metabolites in the tissue and culture medium by HPLC, lactate dehydrogenase release to the culture medium, cellular uptake of propidium iodide and counted the tyrosine hydroxylase-immunoreactive neurones. Inhibition of tetrahydrobiopterin synthesis by 2,4-diamino-6...

Synthesis of a Pseudodisaccharide α-C-Glycosidically Linked to an 8-Alkylated Guanine

Directory of Open Access Journals (Sweden)

Jan Duchek

2013-04-01

Full Text Available The synthesis of stable guanofosfocin analogues has attracted considerable attention in the past 15 years. Several guanofosfocin analogues mimicking the three constitutional elements of mannose, ribose, and guanine were designed and synthesized. Interest in ether-linked pseudodisaccharides and 8-alkylated guanines is increasing, due to their potential applications in life science. In this article, a novel guanofosfocin analogue 6, an ether-linked pseudodisaccharide connected α-C-glycosidically to an 8-alkylated guanine, was synthesized in a 10-longest linear step sequence from known diol 13, resulting in an overall yield of 26%. The key steps involve the ring-opening of cyclic sulfate 8 by alkoxide generated from 7 and a reductive cyclization of 4-N-acyl-2,4-diamino-5-nitrosopyrimidine 19 to form compound 6.

Tetrasubstituted phenanthrolines as highly potent, water-soluble, and selective g-quadruplex ligands

DEFF Research Database (Denmark)

Larsen, Anders Foller; Nielsen, Mads Corvinius; Ulven, Trond

2012-01-01

Small molecules capable of stabilizing the G-quadruplex (G4) structure are of interest for the development of improved anticancer drugs. Novel 4,7-diamino-substituted 1,10-phenanthroline-2,9-dicarboxamides that represent hybrid structures of known phenanthroline-based ligands have been designed....... An efficient synthetic route to the compounds has been developed and their interactions with various G4 sequences have been evaluated by Förster resonance energy transfer (FRET) melting assays, fluorescent intercalator displacement (FID), electrospray ionization mass spectrometry (ESI-MS), and circular...... dichroism (CD) spectroscopy. The preferred compounds have high aqueous solubility and are strong and potent G4 binders with a high selectivity over duplex DNA; thus, they represent a significant improvement over the lead compounds. Two of the compounds are inhibitors of HeLa and HT1080 cell proliferation....

Design and Production of an Articulating Needle Guide for Ultrasound-Guided Needle Block Manufactured With a Three-Dimensional Printer: Technical Communication.

Science.gov (United States)

Bigeleisen, Paul E

2017-05-15

Needle guides may allow the practitioner to align the needle with the probe when ultrasound-guided nerve block is performed. The author's goal was to design and fabricate an inexpensive ($1.90), disposable, needle guide that could articulate over a range from 85 degrees to 0 degrees with a three-dimension printer. Three-dimensional representations of an L50, L25, and C 60 ultrasound probe (Sono Site, Bothell, WA) were created using a laser scanner. Computer-aided design software (Solid Works, Waltham, MA) was used to design a needle bracket and needle guide to attach to these probes. A three-dimensional printer was used to fabricate the needle bracket and guide with acrylonitrile polybutadiene polystyrene. An echogenic needle was held in plane with the needle guide. The author performed a supraclavicular block in a morbidly obese patient. The needle was easily visualized. Similar guides that are commercially available cost as much as $400. A knowledge of computer-aided design is necessary for this work.

Hybrid, Nanoscale Phospholipid/Block Copolymer Vesicles

Directory of Open Access Journals (Sweden)

Bo Liedberg

2013-09-01

Full Text Available Hybrid phospholipid/block copolymer vesicles, in which the polymeric membrane is blended with phospholipids, display interesting self-assembly behavior, incorporating the robustness and chemical versatility of polymersomes with the softness and biocompatibility of liposomes. Such structures can be conveniently characterized by preparing giant unilamellar vesicles (GUVs via electroformation. Here, we are interested in exploring the self-assembly and properties of the analogous nanoscale hybrid vesicles (ca. 100 nm in diameter of the same composition prepared by film-hydration and extrusion. We show that the self-assembly and content-release behavior of nanoscale polybutadiene-b-poly(ethylene oxide (PB-PEO/1-palmitoyl-2-oleoyl-sn-glycero-3-phosphatidylcholine (POPC hybrid phospholipid/block copolymer vesicles can be tuned by the mixing ratio of the amphiphiles. In brief, these hybrids may provide alternative tools for drug delivery purposes and molecular imaging/sensing applications and clearly open up new avenues for further investigation.

Modeling and simulation of the debonding process of composite solid propellants

Science.gov (United States)

Feng, Tao; Xu, Jin-sheng; Han, Long; Chen, Xiong

2017-07-01

In order to study the damage evolution law of composite solid propellants, the molecular dynamics particle filled algorithm was used to establish the mesoscopic structure model of HTPB(Hydroxyl-terminated polybutadiene) propellants. The cohesive element method was employed for the adhesion interface between AP(Ammonium perchlorate) particle and HTPB matrix and the bilinear cohesive zone model was used to describe the mechanical response of the interface elements. The inversion analysis method based on Hooke-Jeeves optimization algorithm was employed to identify the parameters of cohesive zone model(CZM) of the particle/binder interface. Then, the optimized parameters were applied to the commercial finite element software ABAQUS to simulate the damage evolution process for AP particle and HTPB matrix, including the initiation, development, gathering and macroscopic crack. Finally, the stress-strain simulation curve was compared with the experiment curves. The result shows that the bilinear cohesive zone model can accurately describe the debonding and fracture process between the AP particles and HTPB matrix under the uniaxial tension loading.

Inversion of the pahse diagram in polymer blends studied by small-angle neutron scattering

International Nuclear Information System (INIS)

Jinnai, Hiroshi; Hasegawa, Hirokazu; Hashimoto, Takeji; Han, C.C.

1993-01-01

The miscibility of an amorphous mixture of normal (protonated) polybutadiend (HPB) and perdeuterated polybutadiene (DPB) has been extensively studied and was characterized by an upper critical solution temperature (UCST). In this study the miscibility of HPB and DPB as a function of temperature was studied by small-angle neutron scattering (SANS). The vinyl component of the DPB was held constant at 16%, while the vinyl frantion of the HPB was varied from 17-80%. The binary interaction parameter, χ, was obtained. The mixtures of DPB and HPB with 17-39% vinyl show UCST behaviors; i.e., χ increases with decreasing temperature. The mixture of DPB and HPB with 52% vinyl was found to have almost no temperature dependence. However, the mixture of DPB and HPB with 65-80% show a lower critical solution temperature (LCST) behavior; i.e., χ increases with increasing temperature. This inversion of the phase diagram from UCST to LCST has never been observed. (author)

The effects of viscoelastic polymer substrates on adult stem cell differentiation

Science.gov (United States)

Chang, Chungchueh; Fields, Adam; Ramek, Alex; Jurukovski, Vladimir; Simon, Marcia; Rafailovich, Miriam

2009-03-01

Dental Pulp Stem Cells (DPSCs) are known to differentiate in either bone, dentine, or nerve tissue by different environment signals. In this study, we have determined whether differentiation could only through modification of the substrate mechanics. Atomic Force Microscopy (AFM) on Shear Modulation Force Microscopy (SMFM) mode indicated that the spun-cast polybutadiene (PB) thin films could be used to provide different stiffness substrates by changing the thicknesses of thin films. DPSCs were then plated on these substrates and cultured in standard media. After 28 days incubation, Lasar Scanning Confocal Microscopy (LSCM) with mercury lamp indicated that the crystals were observed only on hard surfaces. The Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray analysis (EDX analysis) indicated that the crystals are calcium phosphates. The Glancing Incidence Diffraction (GID) was also used to determine the structure of crystals. These results indicate that DPSCs could be differentiated into osteoblasts by mechanical stimuli from substrate mechanics.

US rubber markets recover

International Nuclear Information System (INIS)

Wood, A.

1993-01-01

Synthetic rubber markets in North America bounced back in no uncertain terms last year, with demand climbing an impressive 9.5%, to 2.97 million m.t.; and, according to the International Institute of Synthetic Rubber Producers (IIS-RP; Houston) latest five-year forecast, producers can look forward to a 3.3% increase in demand during 1993. This growth rate outpaced out 1992 forecast and demonstrates the resilience of the synthetic rubber industry, says William E. Tessemer, managing director of IISRP. We expect demand in 1993 to surpass 1992 and level off at a 2%/year growth rate for synthetic rubber - 2.5% including thermoplastic elastomers [TPEs]-over the 1993-97 period. The improvement reflects signs of a recovery in North America, especially the pickup in the auto and tire industry. The two major tire rubbers - styrene butadiene and polybutadiene rubber - notched up double-digit gains, and other materials that have autos uses, such as nitrile rubber and many of the specialty elastomers, also advanced strongly

Strain rate behavior of magnetorheological materials

International Nuclear Information System (INIS)

Seminuk, Kenneth; Joshi, Vasant; Gump, Jared; Stoltz, Chad; Forbes, Jerry

2014-01-01

Strain rate response of two Hydroxyl-terminated Polybutadiene/ Iron (HTPB/Fe) compositions under electromagnetic fields has been investigated using a Split Hopkinson Pressure bar arrangement equipped with aluminum bars. Two HTPB/Fe compositions were developed, the first without plasticizer and the second containing plasticizer. Samples were tested with and without the application of a 0.01 Tesla magnetic field. Strain gauge data taken from the Split Hopkinson Pressure Bar has been used to determine the extent of change in mechanical properties by inducing a mild electromagnetic field onto each sample. Raw data from strain gages was processed using commercial software (Signo) and Excel spreadsheet. It is of particular interest to determine whether the mechanical properties of binder systems can be manipulated by adding ferrous or Magnetostrictive particulates. Data collected from the Split Hopkinson Pressure bar indicate changes in the Mechanical Stress-Strain curves and suggest that the impedance of a binder system can be altered by means of a magnetic field.

Diffusion of radioactively tagged penetrants through rubbery polymers. II. Dependence on molecular length of penetrant

International Nuclear Information System (INIS)

Rhee, C.K.; Ferry, J.D.; Fetters, L.J.

1977-01-01

The diffusion of radioactively tagged n-hexadecane, n-dotriacontane, and a polybutadiene oligomer with molecular weight 1600 has been studied in 12 rubbery polymers. Diffusion coefficients were obtained from the theory for the thin smear method: for n-hexadecane and for n-dotriacontane (with one exception), in the form appropriate for a completely miscible polymer-penetrant pair, and for the oligomer in the form appropriate for slow entry of the pentrant across the penetrant-polymer interface. For the four flexible linear penetrants, n-dodecane, n-hexadecane, n-dotriacontane, and oligomer, the ratios of diffusion coefficients (or translational friction coefficients) are nearly the same in every polymer. It is concluded that these penetrants travel with similar segmentwise motions, although that is not the case with bulkier, more rigid penetrants. For the three normal paraffins, the friction coefficient is approximately proportional to molecular weight, but that for the oligomer is smaller than would be predicted on this basis

Enhanced interfacial radiation-induced reaction for improving the interfacial adhesion of incompatible polymer blend PP/BR

International Nuclear Information System (INIS)

Liu Changhai; Yang Huili; Xu Jun

1995-01-01

γ-radiation induced interfacial changes of incompatible polymer isotactic polypropylene (PP) and cis1,4-polybutadiene (BR) blends containing polyfunctional monomer (PFM) triallyl isocyanurate (TAIC) were investigated. The results of the study are as following: PP is incompatible with BR; TAIC is hardly dissolved in both PP and BR; when blended with PP/BR, the concentration of TAIC in the interfacial region is higher than that in dispersion phase of BR or matrix of PP. The crosslinking and/or grafting of which TAIC occurred under radiation in the interfacial region anchored the dispersed BR phase to PP matrix. The interaction between adjacent phases is changed from sole van der Waals force to co-action of both chemical bond and molecular forces. Crosslinking between adjacent phases links the dispersed phase with PP matrix, and grafting in the boundary regions increases the thickness of interface. These result in a good interfacial adhesion between dispersed phase and matrix. (author)

Poly(propylene)/aspen/liquid polybutadiene composites: maximization of impact strength, tensile and modulus by statistical experimental design

Czech Academy of Sciences Publication Activity Database

Kokta, B. V.; Michálková, Danuše; Fortelný, Ivan; Kruliš, Zdeněk

2007-01-01

Roč. 18, č. 2 (2007), s. 106-111 ISSN 1042-7147 Grant - others:Network of Centres of Excellence(EU) AUTO21 Institutional research plan: CEZ:AV0Z40500505 Source of funding: R - rámcový projekt EK Keywords : poly butadiene * composites * poly (propylene) (pp) Subject RIV: CD - Macromolecular Chemistry Impact factor: 1.504, year: 2007

Reactive Energetic Plasticizers Utilizing Cu-Free Azide-Alkyne 1,3-Dipolar Cycloaddition for In-Situ Preparation of Poly(THF-co-GAP-Based Polyurethane Energetic Binders

Directory of Open Access Journals (Sweden)

Mingyang Ma

2018-05-01

Full Text Available Reactive energetic plasticizers (REPs coupled with hydroxy-telechelic poly(glycidyl azide-co-tetrahydrofuran (PGT-based energetic polyurethane (PU binders for use in solid propellants and plastic-bonded explosives (PBXs were investigated. The generation of gem-dinitro REPs along with a terminal alkyne stemmed from a series of finely designed approaches to not only satisfy common demands as conventional energetic plasticizers, but also to prevent the migration of plasticizers. The miscibility and rheological behavior of a binary mixture of PGT/REP with various REP fractions were quantitatively determined by differential scanning calorimetry (DSC and rheometer, respectively, highlighting the promising performance of REPs in the formulation process. The kinetics on the distinct reactivity of propargyl vs. 3-butynyl species of REPs towards the azide group of the PGT prepolymer in terms of Cu-free azide-alkyne 1,3-dipolar cycloaddition (1,3-DPCA was studied by monitoring 1H nuclear magnetic resonance spectroscopy and analyzing the activation energies (Ea obtained using DSC. The thermal stability of the finally cured energetic binders with the incorporation of REPs indicated that the thermal stability of the REP/PGT-based PUs was maintained independently of the REP content. The tensile strength and modulus of the PUs increased with an increase in the REP content. In addition, the energetic performance and sensitivity of REP and REP triazole species was predicted.

Chiral building blocks from biomass: 2,5-Diamino-2,5-dideoxy-1,4-3,6-dianhydroiditol

NARCIS (Netherlands)

Thiyagarajan, S.; Gootjes, L.; Vogelzang, W.; Wu, J.; Haveren, van J.; Es, van D.S.

2011-01-01

Isohexides (isomannide (endo-endo), isosorbide (endo-exo), and isoidide (exo-exo) are a group of renewable bio-based building blocks that received considerable attention among the polymer industries because these rigid bicyclic diols have several interesting properties in polymer applications.1 We

Mars Ascent Vehicle-Propellant Aging

Science.gov (United States)

Dankanich, John; Rousseau, Jeremy; Williams, Jacob

2015-01-01

This project is to develop and test a new propellant formulation specifically for the Mars Ascent Vehicle (MAV) for the robotic Mars Sample Return mission. The project was initiated under the Planetary Sciences Division In-Space Propulsion Technology (ISPT) program and is continuing under the Mars Exploration Program. The two-stage, solid motor-based MAV has been the leading MAV solution for more than a decade. Additional studies show promise for alternative technologies including hybrid and bipropellant options, but the solid motor design has significant propellant density advantages well suited for physical constraints imposed while using the SkyCrane descent stage. The solid motor concept has lower specific impulse (Isp) than alternatives, but if the first stage and payload remain sufficiently small, the two-stage solid MAV represents a potential low risk approach to meet the mission needs. As the need date for the MAV slips, opportunities exist to advance technology with high on-ramp potential. The baseline propellant for the MAV is currently the carboxyl terminated polybutadiene (CTPB) based formulation TP-H-3062 due to its advantageous low temperature mechanical properties and flight heritage. However, the flight heritage is limited and outside the environments, the MAV must endure. The ISPT program competed a propellant formulation project with industry and selected ATK to develop a new propellant formulation specifically for the MAV application. Working with ATK, a large number of propellant formulations were assessed to either increase performance of a CTPB propellant or improve the low temperature mechanical properties of a hydroxyl terminated polybutadiene (HTPB) propellant. Both propellants demonstrated potential to increase performance over heritage options, but an HTPB propellant formulation, TP-H-3544, was selected for production and testing. The test plan includes propellant aging first at high vacuum conditions, representative of the Mars transit

Preparation of new series of poly(amide-imide) reinforced layer silicate nano composite containing N-trimellitimide-L-alanine

International Nuclear Information System (INIS)

Faghihi, K.; Soleimani, M.; Shabanian, M.

2011-01-01

A new poly(amide-imide)-montmorillonite series were generated through solution intercalation technique. Cloisite 20A was used as a modified montmorillonite for ample compatibility with the poly(amide-imide) (PAI) matrix. The PAI 5 chains were synthesized by the direct polycondensation reaction of N-trimellitylimido-L-alanine (3) with 4,4'-diamino diphenyl ether (4) in the presence of tryphenyl phosphites (TPP), CaCl 2 , pyridine and N-methyl-2-pyrrolidone (NMP). Morphology and structure of the resulting PAI-nano composite films 5a-5d with (5-20 Wt%) silicate particles were characterized by Ftir spectroscopy, X-ray diffraction and scanning electron microscopy. The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nano composites films were investigated by using UV-Vis spectroscopy, thermogravimetric analysis and water uptake measurements. (Author)

Preparation of new series of poly(amide-imide) reinforced layer silicate nano composite containing N-trimellitimide-L-alanine

Energy Technology Data Exchange (ETDEWEB)

Faghihi, K.; Soleimani, M. [Polymer Research Laboratory, Department of Chemistry, Faculty of Science, Islamic Azad University, Arak Branch, Arak (Iran, Islamic Republic of); Shabanian, M., E-mail: k-faghihi@araku.ac.ir [Young Researches Club, Islamic Azad University, Arak Branch, Arak (Iran, Islamic Republic of)

2011-07-01

A new poly(amide-imide)-montmorillonite series were generated through solution intercalation technique. Cloisite 20A was used as a modified montmorillonite for ample compatibility with the poly(amide-imide) (PAI) matrix. The PAI 5 chains were synthesized by the direct polycondensation reaction of N-trimellitylimido-L-alanine (3) with 4,4'-diamino diphenyl ether (4) in the presence of tryphenyl phosphites (TPP), CaCl{sub 2}, pyridine and N-methyl-2-pyrrolidone (NMP). Morphology and structure of the resulting PAI-nano composite films 5a-5d with (5-20 Wt%) silicate particles were characterized by Ftir spectroscopy, X-ray diffraction and scanning electron microscopy. The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nano composites films were investigated by using UV-Vis spectroscopy, thermogravimetric analysis and water uptake measurements. (Author)

A comparative study between three stability indicating spectrophotometric methods for the determination of diatrizoate sodium in presence of its cytotoxic degradation product based on two-wavelength selection

Science.gov (United States)

Riad, Safaa M.; El-Rahman, Mohamed K. Abd; Fawaz, Esraa M.; Shehata, Mostafa A.

2015-06-01

Three sensitive, selective, and precise stability indicating spectrophotometric methods for the determination of the X-ray contrast agent, diatrizoate sodium (DTA) in the presence of its acidic degradation product (highly cytotoxic 3,5-diamino metabolite) and in pharmaceutical formulation, were developed and validated. The first method is ratio difference, the second one is the bivariate method, and the third one is the dual wavelength method. The calibration curves for the three proposed methods are linear over a concentration range of 2-24 μg/mL. The selectivity of the proposed methods was tested using laboratory prepared mixtures. The proposed methods have been successfully applied to the analysis of DTA in pharmaceutical dosage forms without interference from other dosage form additives. The results were statistically compared with the official US pharmacopeial method. No significant difference for either accuracy or precision was observed.

Synthesis and characterizations of novel polymer electrolytes

Science.gov (United States)

Chanthad, Chalathorn

Polymer electrolytes are an important component of many electrochemical devices. The ability to control the structures, properties, and functions of polymer electrolytes remains a key subject for the development of next generation functional polymers. Taking advantage of synthetic strategies is a promising approach to achieve the desired chemical structures, morphologies, thermal, mechanical, and electrochemical properties. Therefore, the major goal of this thesis is to develop synthetic methods for of novel proton exchange membranes and ion conductive membranes. In Chapter 2, new classes of fluorinated polymer- polysilsesquioxane nanocomposites have been designed and synthesized. The synthetic method employed includes radical polymerization using the functional benzoyl peroxide initiator for the telechelic fluorinated polymers with perfluorosulfonic acids in the side chains and a subsequent in-situ sol-gel condensation of the prepared triethoxylsilane-terminated fluorinated polymers with alkoxide precursors. The properties of the composite membranes have been studied as a function of the content and structure of the fillers. The proton conductivity of the prepared membranes increases steadily with the addition of small amounts of the polysilsesquioxane fillers. In particular, the sulfopropylated polysilsesquioxane based nanocomposites display proton conductivities greater than Nafion. This is attributed to the presence of pendant sulfonic acids in the fillers, which increases ion-exchange capacity and offers continuous proton transport channels between the fillers and the polymer matrix. The methanol permeability of the prepared membranes has also been examined. Lower methanol permeability and higher electrochemical selectivity than those of Nafion have been demonstrated in the polysilsesquioxane based nanocomposites. In Chapter 3, the synthesis of a new class of ionic liquid-containing triblock copolymers with fluoropolymer mid-block and imidazolium methacrylate

Preparation of Water-Selective Polybutadiene Membranes and Their Use in Drying Alcohols by Pervaporation and Vapor Permeation Technologies

Science.gov (United States)

Separating azeotrope-forming solvent-water mixtures by conventional distillation poses technical, economic, and environmental challenges. Membrane technology using water-permselective membranes provides an efficient alternative for water removal from solvents. We present here a n...

Synthesis, characterization, and subcellular localization studies of amino acid-substituted porphyrinic pigments

Science.gov (United States)

van Diggelen, Lisa; Khin, Hnin; Conner, Kip; Shao, Jenny; Sweezy, Margaretta; Jung, Anna H.; Isaac, Meden; Simonis, Ursula

2009-06-01

Stopping cancer in its path occurs when photosensitizers (PSs) induce apoptotic cell death after their exposure to light and the subsequent formation of reactive oxygen species. In pursuit of our hypothesis that mitochondrial localizing PSs will enhance the efficacy of the photosensitizing process in photodynamic therapy, since they provoke cell death by inducing apoptosis, we synthesized and characterized tetraphenylporphyrins (TPPs) that are substituted at the paraphenyl positions by two amino acids and two fluoro or hydroxyl groups, respectively. They were prepared according to the Lindsey-modified Adler-Longo methodology using trifluoromethanesulfonylchloride (CF3SO2Cl) as a catalyst instead of trifluoroacetic acid. The use of CF3SO2Cl yielded cleaner products in significantly higher yields. During the synthesis, not only the yields and work-up procedure of the TPPs were improved by using CF3SO2Cl as a catalyst, but also a better means of synthesizing the precursor dipyrromethanes was tested by using indium(III) chloride. Column chromatography, HPLC, and NMR spectroscopy were used to separate and characterize the di-amino acid-dihydroxy, or difluoro-substituted porphyrins and to ascertain their purity before subcellular localization studies were carried out. Studies using androgen-sensitive human prostate adenocarcinoma cells LNCaP revealed that certain amino acid substituted porphyrins that are positively charged in the slightly acidic medium of cancer cells are very useful in shedding light on the targets of TPPs in subcellular organelles of cancer cells. Although some of these compounds have properties of promising photosensitizers by revealing increased water solubility, acidic properties, and innate ability to provoke cell death by apoptosis, the cell killing efficacy of these TPPs is low. This correlates with their subcellular localization. The di-amino acid, di-hydroxy substituted TPPs localize mainly to the lysosomes, whereas the di

[Spatial structure of the calixarene-aminophosphonic acids is important for their inhibition of the Na+,K(+)-ATPase activity in plasma membrane of smooth muscle cells].

Science.gov (United States)

Veklich, T O; Shkrabak, O A; Rodik, R V; Boĭko, V I; Kal'chenko, V I; Kosterin, S O

2010-01-01

It was found that calixarene C-107 (5,17-diamino(2-pyridyl)methylphosphono-11,23-di-tret-butyl-26,28-dihydroxy-25,27-dipropoxycalix[4]arene) could effectively reduce Na+,K(+)-ATPase activity of the myometrium cell plasmatic membranes (the value of the apparent constant of inhibition I0.5 was 33 +/- 4 nM) while it practically did not influence the "basal" Mg2(+)-ATPase activity of the same membrane. In comparative experiments, we have shown that the model calixarene C-150--the calixarene "scaffold" (26,28-dihydroxy-25,27-dipropoxycalix[4]arene), and the model compound M-3 (4-hydroxyaniline(2-pyridine)methylphosphonic acid)--a fragment of the calixarene C-107, had practically no influence on the enzymatic activities of Na+,K(+)-ATPase and Mg(2+)-ATPase over a wide range of concentrations. Hence, the influence of calixarene C-107 on Na+,K(+)-ATPase activity was caused by the joint action of two aminophosphonic substituents on the upper rim of the calixarene bowl. The isomer of calixarene C-107--calixarene C-160 (5,11-diamino(2-pyridyl)methylphosphono-17,23-di-tret-butyl-26,28-dihydroxy-25,27-dipropoxycalix[4]arene) also did not influence the Na+,K(+)-ATPase and Mg(2+)-ATPase activities of plasmatic membrane of myometrium cells. We carried out molecular modeling of calixarenes C-107 and C-160 and showed differences in interatomic distance between aminophosphonic substituents of mentioned calixarenes. We came to the conclusion that spatial structure of calixarene C-107, namely localization of two aminophosphonic substituents in 5,17 position of the upper rim of this calixarene, is crucial for inhibition of Na+,K(+)-ATPase activity. Using laser correlation spectroscopy it was found that the 100 microM solution of calixarene C-107 and 2.5% DMSO had microparticles with size range from 100 nm to 10 microm. Plasma membrane vesicles had average hydrodynamic diameter 401 +/- 17 nm, but after interaction of these vesicles with calixarene C-107 we have registered the creation of

One-Dimensional Time to Explosion (Thermal Sensitivity) of ANPZ

Energy Technology Data Exchange (ETDEWEB)

Hsu, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hust, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McClelland, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gresshoff, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2014-11-12

Incidents caused by fire and combat operations can heat energetic materials that may lead to thermal explosion and result in structural damage and casualty. Some explosives may thermally explode at fairly low temperatures (< 100 C) and the violence from thermal explosion may cause a significant damage. Thus it is important to understand the response of energetic materials to thermal insults. The One Dimensional Time to Explosion (ODTX) system at the Lawrence Livermore National Laboratory has been used for decades to measure times to explosion, threshold thermal explosion temperature, and determine kinetic parameters of energetic materials. Samples of different configurations (pressed part, powder, paste, and liquid) can be tested in the system. The ODTX testing can also provide useful data for assessing the thermal explosion violence of energetic materials. This report summarizes the recent ODTX experimental data and modeling results for 2,6-diamino-3,5-dintropyrazine (ANPZ).

The radioprotective effect of a new aminothiol (20-PRA)

International Nuclear Information System (INIS)

Dolabela, M.F.; Lopes, M.T.P.; Pereira, M.T.; Steffani, G.M.; Pilo-Veloso, D.; Salas, C.E.; Nelson, D.L.

1998-01-01

We examined the radioprotective effect of aminothiol 2-N-propylamine-cyclohexane thiol (20-PRA) on a human leukemic cell line (K562) following various radiation doses (5,7.5 and 20 Gy) using a source of 60 Co γ-rays. At 5 Gy and 1nM 20-PRA, a substantial protective effect (58%) was seen 24 h after irradiation, followed by a decrease at 48 h (11%). At the high radiation dose (20 Gy) a low protective effect was also seen (35%). In addition, the anti tumorigenic potential of 10 nM 20-PRA was shown by the inhibition of crown gall formation induced by Agrobacterium tumefaciens. The radioprotective potency of 20-PRA is 10 5- 10 6 times higher than that of the aminothiol WR-1065 (N(2-mercaptoethyl)-1,3-diamino propane) whose protective effect is in the 0.1 to 1.0 nM range. (author)

Preparation and characterization of new polyamide/montmorillonite nanocomposites containing azo moiety in the main chain

Directory of Open Access Journals (Sweden)

Khalil Faghihi

2016-11-01

Full Text Available Two new samples of polyamide/montmorillonite reinforced nanocomposites containing 4,4′-azobenzoic acid moiety in the main chain were synthesized by a convenient solution intercalation technique. Polyamide (PA 4 as a source of polymer matrix was synthesized by the direct polycondensation reaction of 4,4′-azobenzoic acid 2 with 4,4′-diamino diphenyl ether 3 in the presence of triphenyl phosphite (TPP, CaCl2, pyridine and N-methyl-2-pyrrolidone (NMP. Morphology and structure of the resulting PA-nanocomposite films 4a and 4b with 10 and 20% silicate particles were characterized by FTIR spectroscopy, X-ray diffraction (XRD and scanning electron microscopy (SEM. The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nanocomposites films were investigated by using UV–vis spectroscopy, thermogravimetric analysis (TGA and water uptake measurements.

Synthesis, characterization and photo behavior of new poly(amide-imide/montmorillonite nanocomposite containing N,N'-pyrromellitoyl-bis-L-alanine

Directory of Open Access Journals (Sweden)

M. Hajibeygi

2013-09-01

Full Text Available Two new samples of poly(amide-imide-nanocomposites were synthesized by insertion nano silicate particles in poly(amide-imide (PAI chains using a convenient solution intercalation technique. PAI as a source of polymer matrix was synthesized by the direct polycondensation reaction of N,N'-pyrromelitoyl-bis-L-alanine with 4,4'-diamino diphenyl ether in the presence of triphenyl phosphite (TPP, CaCl2, pyridine and N-methyl-2-pyrrolidone (NMP. Morphology and structure of the resulting PAI-nanocomposite films with 5 and 10% silicate particles were characterized by FTIR spectroscopy, X-ray diffraction (XRD and scanning electron microscopy (SEM. The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nanocomposites films were investigated by using UV-Vis spectroscopy, thermogravimetric analysis (TGA and water uptake measurements.DOI: http://dx.doi.org/10.4314/bcse.v27i3.15

Enhancement of Thermal Stability and Selectivity by Introducing Aminotriazine Comonomer to Poly(Octadecyl Acrylate-Grafted Silica as Chromatography Matrix

Directory of Open Access Journals (Sweden)

Abul K. Mallik

2018-02-01

Full Text Available This paper introduces a poly(octadecyl acrylate (pODA-based organic phase on silica, which is assisted by 2-vinyl-4,6-diamino-1,3,5-triazine (AT, for a chromatography stationary phase. The ODA-AT copolymer grafting onto silica surface was characterized by elemental analysis, FT-IR spectroscopy, scanning electron microscopy, thermo gravimetric analysis and differential scanning calorimeter (DSC. An endothermic peak top of the copolymer-grafted silica was increased to 46 °C from 38 °C, which was a peak top of pODA homopolymer. For high performance liquid chromatography (HPLC application, the molecular selectivity increased with an increase in the AT contents of the ODA-AT copolymer as organic phase. The co-existence of an aminotriazine moiety in the copolymer promoted side-chain ordering of the poly(octadecyl moiety, thus enhancing molecular planarity selectivity for PAHs in reversed-phase liquid chromatography.

DFT, FT-IR, FT-Raman and NMR studies of 4-(substituted phenylazo)-3,5-diacetamido-1H-pyrazoles

Science.gov (United States)

Kınalı, Selin; Demirci, Serkan; Çalışır, Zühre; Kurt, Mustafa; Ataç, Ahmet

2011-05-01

We present a detailed analysis of the structural and vibrational spectra of some novel azo dyes. 2-(Substituted phenylazo)malononitriles were synthesized by the coupling reaction of the diazonium salts, which were prepared with the use of various aniline derivatives with malononitrile, and then 4-(substituted phenylazo)-3,5-diamino-1H-pyrazole azo dyes were obtained via the ring closure of the azo compounds with hydrazine monohydrate. The experimental and theoretical vibrational spectra of azo dyes were studied. The structural and spectroscopic analysis of the molecules were carried out by using Becke's three-parameters hybrid functional (B3LYP) and density functional harmonic calculations. The 1H nuclear magnetic resonance (NMR) chemical shifts of the azo dye molecules were calculated using the gauge-invariant-atomic orbital (GIAO) method. The calculated vibrational wavenumbers and chemical shifts were compared with the experimental data of the molecules.

[Direct assays of radiation-induced DNA base lesions in mammalian cells.] Final progress report, February 1, 1984-June 30, 1986

International Nuclear Information System (INIS)

Wheeler, K.T.

1986-01-01

Adenine (Ade), 2'-deoxyadenosine (dAdo) and 5'-deoxyadenosine monophosphate (5'-dAMP) were irradiated with 50 to 15,000 Gy under oxic and hypoxic conditions. HPLC procedures providing satisfactory separation of the adenine damage products formed during irradiation of DNA model compounds were found. Structures of some of the damage products were confirmed to include 8-OHAde, 4,6-diamino-5-formamidopyrimidine, and 8-OH-5'-dAMP. Two damage products of dAdo (8-OHdAdo and the major isomer of 8,5'-cdAdo), the formation of which depends on the presence or absence of oxygen, were determined quantitatively by HPLC. The limit for HPLC detection was estimated as 4 to 50 pmoles for these compounds. This corresponds to a detection limit of about 50 Gy in radiation dose units. These two products were also detected in mixtures of all four nucleosides irradiated with 50 Gy

High-Fidelity Microstructural Characterization and Performance Modeling of Aluminized Composite Propellant

International Nuclear Information System (INIS)

Kosiba, Graham D.; Wixom, Ryan R.; Oehlschlaeger, Matthew A.

2017-01-01

Image processing and stereological techniques were used to characterize the heterogeneity of composite propellant and inform a predictive burn rate model. Composite propellant samples made up of ammonium perchlorate (AP), hydroxyl-terminated polybutadiene (HTPB), and aluminum (Al) were faced with an ion mill and imaged with a scanning electron microscope (SEM) and x-ray tomography (micro-CT). Properties of both the bulk and individual components of the composite propellant were determined from a variety of image processing tools. An algebraic model, based on the improved Beckstead-Derr-Price model developed by Cohen and Strand, was used to predict the steady-state burning of the aluminized composite propellant. In the presented model the presence of aluminum particles within the propellant was introduced. The thermal effects of aluminum particles are accounted for at the solid-gas propellant surface interface and aluminum combustion is considered in the gas phase using a single global reaction. In conclusion, properties derived from image processing were used directly as model inputs, leading to a sample-specific predictive combustion model.

An accurate and stable nitrate-selective electrode for the in situ determination of nitrate in agricultural drainage waters.

Science.gov (United States)

Le Goff, Thierry; Braven, Jim; Ebdon, Les; Chilcottt, Neil P; Scholefield, David; Wood, John W

2002-04-01

A field evaluation of a novel nitrate-ion selective electrode (ISE) was undertaken by continuous immersion over a period of 5 months in agricultural drainage weirs. The nitrate sensor N,N,N-triallyl leucine betaine was covalently attached to polystyrene-block-polybutadiene-block-polystyrene (SBS) using a free radical initiated co-polymerisation, to produce a rubbery membrane which was incorporated into a commercially available electrode body. A measurement unit was constructed comprising the nitrate-ISEs, a reference electrode and a temperature probe connected through a pre-amplifier to a data-logger and battery supply. A temperature correction algorithm was developed to accomodate the temperature changes encountered in the drainage weirs. The nitrate results obtained with the ISEs at hourly intervals compared very favourably (R2 = 0.99) with those obtained with laboratory automated chemical determinations made on contemporaneous samples of drainage in a concentration range 0.47-16 ppm nitrate-N. The ISEs did not require re-calibration and no deterioration in performance or fouling of the membrane surface was observed over four months of deployment.

Effect of Propellant Composition to the Temperature Sensitivity of Composite Propellant

International Nuclear Information System (INIS)

Aziz, Amir; Mamat, Rizalman; Amin, Makeen; Wan Ali, Wan Khairuddin

2012-01-01

The propellant composition is one of several parameter that influencing the temperature sensitivity of composite propellant. In this paper, experimental investigation of temperature sensitivity in burning rate of composite propellant was conducted. Four sets of different propellant compositions had been prepared with the combination of ammonium perchlorate (AP) as an oxidizer, aluminum (Al) as fuel and hydroxy-terminated polybutadiene (HTPB) as fuel and binder. For each mixture, HTPB binder was fixed at 15% and cured with isophorone diisocyanate (IPDI). By varying AP and Al, the effect of oxidizer- fuel mixture ratio (O/F) on the whole propellant can be determined. The propellant strands were manufactured using compression molded method and burnt in a strand burner using wire technique over a range of pressure from 1 atm to 31 atm. The results obtained shows that the temperature sensitivity, a, increases with increasing O/F. Propellant p80 which has O/F ratio of 80/20 gives the highest value of temperature sensitivity which is 1.687. The results shows that the propellant composition has significant effect on the temperature sensitivity of composite propellant

A research on polyether glycol replaced APCP rocket propellant

Science.gov (United States)

Lou, Tianyou; Bao, Chun Jia; Wang, Yiyang

2017-08-01

Ammonium perchlorate composite propellant (APCP) is a modern solid rocket propellant used in rocket vehicles. It differs from many traditional solid rocket propellants by the nature of how it is processed. APCP is cast into shape, as opposed to powder pressing it with black powder. This provides manufacturing regularity and repeatability, which are necessary requirements for use in the aerospace industry. For traditional APCP, ingredients normally used are ammonium peroxide, aluminum, Hydroxyl-terminated polybutadiene(HTPB), curing agency and other additives, the greatest disadvantage is that the fuel is too expensive. According to the price we collected in our country, a single kilogram of this fuel will cost 200 Yuan, which is about 35 dollars, for a fan who may use tons of the fuel in a single year, it definitely is a great deal of money. For this reason, we invented a new kind of APCP fuel. Changing adhesive agency from cross-linked htpb to cross linked polyether glycol gives a similar specific thrust, density and mechanical property while costs a lower price.

Polymer Nanocomposites with Cellulose Nanocrystals Featuring Adaptive Surface Groups.

Science.gov (United States)

Natterodt, Jens C; Sapkota, Janak; Foster, E Johan; Weder, Christoph

2017-02-13

Cellulose nanocrystals (CNCs) are mechanically rigid, toxicologically benign, fiber-like nanoparticles. They can easily be extracted from renewable biosources and have attracted significant interest as reinforcing fillers in polymers. We here report the modification of CNCs with the 2-ureido-4[1H]pyrimidinone (UPy) motif as an adaptive compatibilizer, which permits the dispersion of UPy-modified CNCs in nonpolar as well as polar media. In toluene, the UPy motifs appear to form intra-CNC dimers, so that the particles are somewhat hydrophobized and well-dispersible in this nonpolar solvent. By contrast, the UPy motifs dissociate in DMF and promote dispersibility through interactions with this polar solvent. We have exploited this adaptiveness and integrated UPy-modified CNCs into nonpolar and polar host polymers, which include different poly(ethylene)s, a polystyrene-block-polybutadiene-block-polystyrene elastomer and poly(ethylene oxide-co-epichlorohydrin). All nanocomposites display an increase of stiffness and strength in comparison to the neat polymer, and some compositions retain a high elongation at break, even at a filler content of 15% w/w.

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

Directory of Open Access Journals (Sweden)

Tian Hui

2014-12-01

Full Text Available The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas. Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB (hydroxyl-terminated polybutadiene hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.

Interfacial Properties of EXXPRO(TM) and General Purpose Elastomers

Science.gov (United States)

Zhang, Y.; Rafailovich, M.; Sokolov, Jon; Qu, S.; Ge, S.; Ngyuen, D.; Li, Z.; Peiffer, D.; Song, L.; Dias, J. A.; McElrath, K. O.

1998-03-01

EXXPRO(Trademark) elastomers are used for tires and many other applications. This elastomer (denoted as BIMS) is a random copolymer of p-methylstyrene (MS) and polyisobutylene (I) with varying degrees of PMS content and bromination (B) on the p-methyl group. BIMS is impermeable to gases, and has good heat, ozone and flex resistance. Very often general purpose elastomers are blended with BIMS. The interfacial width between polybutadiene and BIMS is a sensitive function of the Br level and PMS content. By neutron reflectivity (NR), we studied the dynamics of interface formation as a function of time and temperature for BIMS with varying degrees of PMS and Br. We found that in addition to the bulk parameters, the total film thickness and the proximity of an interactive surface can affect the interfacial interaction rates. The interfacial properties can also be modified by inclusion of particles, such as carbon black (a filler component in tire rubbers). Results will be presented on the relation between the interfacial width as measured by NR and compatibilization studies via AFM and LFM.

Quantification of branching in model three-arm star polyethylene

KAUST Repository

Ramachandran, Ramnath; Beaucage, Gregory B.; Rai, Durgesh K.; Lohse, David J.; Sun, Thomas; Tsou, Andy; Norman, Alexander Iain; Hadjichristidis, Nikolaos

2012-01-01

The versatility of a novel scaling approach in quantifying the structure of model well-defined 3-arm star polyethylene molecules is presented. Many commercial polyethylenes have long side branches, and the nature and quantity of these branches varies widely among the various forms. For instance, low-density polyethylene (LDPE) is typically a highly branched structure with broad distributions in branch content, branch lengths and branch generation (in hyperbranched structures). This makes it difficult to accurately quantify the structure and the inherent structure-property relationships. To overcome this drawback, model well-defined hydrogenated polybutadiene (HPB) structures have been synthesized via anionic polymerization and hydrogenation to serve as model analogues to long-chain branched polyethylene. In this article, model 3-arm star polyethylene molecules are quantified using the scaling approach. Along with the long-chain branch content in polyethylene, the approach also provides unique measurements of long-chain branch length and hyperbranch content. Such detailed description facilitates better understanding of the effect of branching on the physical properties of polyethylene. © 2012 American Chemical Society.

Quantification of branching in model three-arm star polyethylene

KAUST Repository

Ramachandran, Ramnath

2012-01-24

The versatility of a novel scaling approach in quantifying the structure of model well-defined 3-arm star polyethylene molecules is presented. Many commercial polyethylenes have long side branches, and the nature and quantity of these branches varies widely among the various forms. For instance, low-density polyethylene (LDPE) is typically a highly branched structure with broad distributions in branch content, branch lengths and branch generation (in hyperbranched structures). This makes it difficult to accurately quantify the structure and the inherent structure-property relationships. To overcome this drawback, model well-defined hydrogenated polybutadiene (HPB) structures have been synthesized via anionic polymerization and hydrogenation to serve as model analogues to long-chain branched polyethylene. In this article, model 3-arm star polyethylene molecules are quantified using the scaling approach. Along with the long-chain branch content in polyethylene, the approach also provides unique measurements of long-chain branch length and hyperbranch content. Such detailed description facilitates better understanding of the effect of branching on the physical properties of polyethylene. © 2012 American Chemical Society.

Recyclable crosslinked polymer networks with full property recovery made via one-step controlled radical polymerization

Science.gov (United States)

Jin, Kailong; Li, Lingqiao; Torkelson, John

Rubber tires illustrate well the issues ranging from economic loss to environmental problems and sustainability issues that arise with spent, covalently crosslinked polymers. A nitroxide-mediated polymerization (NMP) strategy has been developed that allows for one-step synthesis of recyclable crosslinked polymers from monomers or polymers that contain carbon-carbon double bonds amenable to radical polymerization. Resulting materials possess dynamic alkoxyamine crosslinks that undergo reversible decrosslinking as a function of temperature. Using polybutadiene as starting material, and styrene, an appropriate nitroxide molecule and bifunctional initiator for initial crosslinking, a model for tire rubber can be produced by reaction at temperatures comparable to those employed in tire molding. Upon cooling, the crosslinks are made permanent due to the extraordinarily strong temperature dependence of the reverisible nitroxide capping and uncapping reaction. Based on thermomechanical property characterization, when the original crosslinked model rubber is chopped into bits and remolded in the melt state, a well-consolidated material is obtained which exhibits full recovery of properties reflecting crosslink density after multiple recycling steps.

New injectable elastomeric biomaterials for hernia repair and their biocompatibility.

Science.gov (United States)

Skrobot, J; Zair, L; Ostrowski, M; El Fray, M

2016-01-01

Complications associated with implantation of polymeric hernia meshes remain a difficult surgical challenge. We report here on our work, developing for the first time, an injectable viscous material that can be converted to a solid and elastic implant in vivo, thus successfully closing herniated tissue. In this study, long-chain fatty acids were used for the preparation of telechelic macromonomers end-capped with methacrylic functionalities to provide UV curable systems possessing high biocompatibility, good mechanical strength and flexibility. Two different systems, comprising urethane and ester bonds, were synthesized from non-toxic raw materials and then subjected to UV curing after injection of viscous material into the cavity at the abdominal wall during hernioplasty in a rabbit hernia model. No additional fixation or sutures were required. The control group of animals was treated with commercially available polypropylene hernia mesh. The observation period lasted for 28 days. We show here that artificially fabricated defect was healed and no reherniation was observed in the case of the fatty acid derived materials. Importantly, the number of inflammatory cells found in the surrounding tissue was comparable to these found around the standard polypropylene mesh. No inflammatory cells were detected in connective tissues and no sign of necrosis has been observed. Collectively, our results demonstrated that new injectable and photocurable systems can be used for minimally invasive surgical protocols in repair of small hernia defects. Copyright © 2015 Elsevier Ltd. All rights reserved.

Biomedical applications of polymers derived by reversible addition - fragmentation chain-transfer (RAFT).

Science.gov (United States)

Fairbanks, Benjamin D; Gunatillake, Pathiraja A; Meagher, Laurence

2015-08-30

RAFT- mediated polymerization, providing control over polymer length and architecture as well as facilitating post polymerization modification of end groups, has been applied to virtually every facet of biomedical materials research. RAFT polymers have seen particularly extensive use in drug delivery research. Facile generation of functional and telechelic polymers permits straightforward conjugation to many therapeutic compounds while synthesis of amphiphilic block copolymers via RAFT allows for the generation of self-assembled structures capable of carrying therapeutic payloads. With the large and growing body of literature employing RAFT polymers as drug delivery aids and vehicles, concern over the potential toxicity of RAFT derived polymers has been raised. While literature exploring this complication is relatively limited, the emerging consensus may be summed up in three parts: toxicity of polymers generated with dithiobenzoate RAFT agents is observed at high concentrations but not with polymers generated with trithiocarbonate RAFT agents; even for polymers generated with dithiobenzoate RAFT agents, most reported applications call for concentrations well below the toxicity threshold; and RAFT end-groups may be easily removed via any of a variety of techniques that leave the polymer with no intrinsic toxicity attributable to the mechanism of polymerization. The low toxicity of RAFT-derived polymers and the ability to remove end groups via straightforward and scalable processes make RAFT technology a valuable tool for practically any application in which a polymer of defined molecular weight and architecture is desired. Copyright © 2015. Published by Elsevier B.V.

Toughening of Thermoresponsive Arrested Networks of Elastin-Like Polypeptides To Engineer Cytocompatible Tissue Scaffolds.

Science.gov (United States)

Glassman, Matthew J; Avery, Reginald K; Khademhosseini, Ali; Olsen, Bradley D

2016-02-08

Formulation of tissue engineering or regenerative scaffolds from simple bioactive polymers with tunable structure and mechanics is crucial for the regeneration of complex tissues, and hydrogels from recombinant proteins, such as elastin-like polypeptides (ELPs), are promising platforms to support these applications. The arrested phase separation of ELPs has been shown to yield remarkably stiff, biocontinuous, nanostructured networks, but these gels are limited in applications by their relatively brittle nature. Here, a gel-forming ELP is chain-extended by telechelic oxidative coupling, forming extensible, tough hydrogels. Small angle scattering indicates that the chain-extended polypeptides form a fractal network of nanoscale aggregates over a broad concentration range, accessing moduli ranging from 5 kPa to over 1 MPa over a concentration range of 5-30 wt %. These networks exhibited excellent erosion resistance and allowed for the diffusion and release of encapsulated particles consistent with a bicontinuous, porous structure with a broad distribution of pore sizes. Biofunctionalized, toughened networks were found to maintain the viability of human mesenchymal stem cells (hMSCs) in 2D, demonstrating signs of osteogenesis even in cell media without osteogenic molecules. Furthermore, chondrocytes could be readily mixed into these gels via thermoresponsive assembly and remained viable in extended culture. These studies demonstrate the ability to engineer ELP-based arrested physical networks on the molecular level to form reinforced, cytocompatible hydrogel matrices, supporting the promise of these new materials as candidates for the engineering and regeneration of stiff tissues.

Preparation and characterization of new poly(amide–imide reinforced layer silicate nanocomposite containing N,N′-pyrromellitoyl-bis-l-phenyl acetic acid

Directory of Open Access Journals (Sweden)

Khalil Faghihi

2014-12-01

Full Text Available Two new samples of poly(amide–imide/montmorillonite reinforced nanocomposites containing N,N′-pyrromellitoyl-bis-l-phenyl acetic acid moiety in the main chain were synthesized by a convenient solution intercalation technique. Poly(amide–imide (PAI 3 as a source of polymer matrix was synthesized by the direct polycondensation reaction of N,N′-pyrromelitoyl-bis-l-phenyl acetic acid 1 with 4,4′-diamino diphenyl ether 2 in the presence of triphenyl phosphite (TPP, CaCl2, pyridine and N-methyl-2-pyrrolidone (NMP. Morphology and structure of the resulting PAI-nanocomposite films 4a and 4b with 10% and 20% silicate particles were characterized by FTIR spectroscopy, X-ray diffraction (XRD and scanning electron microscopy (SEM. The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nanocomposite films were investigated by using UV–vis spectroscopy, thermogravimetric analysis (TGA and water uptake measurements.

Synthesis and characterization of thermally stable poly(amide-imide-montmorillonite nanocomposites based on bis(4-carboxyphenyl-N,N'-pyromellitimide acid

Directory of Open Access Journals (Sweden)

M. Hajibeygi

2013-04-01

Full Text Available Two new poly(amide-imide-montmorillonite reinforced nanocomposites containing bis(4-carboxyphenyl-N,N'-pyromellitimide acid moiety in the main chain were synthesized by a convenient solution intercalation technique. Poly(amide-imide (PAI as a source of polymer matrix was synthesized by the direct polycondensation reaction of bis(4-carboxyphenyl-N,N'-pyromellitimide acid with 4,4'-diamino diphenyl sulfone in the presence of triphenyl phosphite (TPP, CaCl2, pyridine and N-methyl-2-pyrrolidone (NMP. Morphology and structure of the resulting PAI-nanocomposite films with 10 and 20% silicate particles were characterized by FT-IR spectroscopy, X-ray diffraction (XRD and scanning electron microscopy (SEM. The effect of clay dispersion and the interaction between clay and polymeric chains on the properties of nanocomposites films were investigated by using UV-Vis spectroscopy, thermal gravimetry analysis (TGA and water uptake measurements.DOI: http://dx.doi.org/10.4314/bcse.v27i1.10

The Structure-Property Relationship of Poly(amide-imide)/Organoclay Nanocomposites

Science.gov (United States)

Faghihi, Khalil; Soleimani, Masoumeh; Shabanian, Meisam; Abootalebi, Ashraf Sadateh

2011-06-01

Surface treated montmorillonite (MMT) was used to prepare nanocomposites with poly(amide-imide) (PAI) 5 by solution intercalation technique with various percent of organoclay (5-15 mass %). Surface modification of the MMT was performed with Cloisite 20A for ample compatibilization with the PAI matrix. The PAI 5 chains were produced through polycondensation of 4,4-diamino diphenyl sulfone 4 with N-trimellitylimido-L-alanine 3 in a medium consisting of triphenyl phosphite, N-methyl-2-pyrolidone (NMP), pyridine and calcium chloride. The PAI-Nanocomposites morphology and clay dispersion were investigated by X-ray diffraction (XRD) and Scanning electron microscopy (SEM). The effect of clay dispersion and the interaction between clay and PAI chains on the properties of PAI-Nanocomposites films were investigated by using UV-Vis spectroscopy, thermogravimetric analysis (TGA) and water uptake measurements. Thermal stability of nanocomposites increased relative to the neat polyamide with increasing organoclay content but water uptake of these materials decreased as compared to the neat polyamide indicating reduced permeability.

Cell wall canals formed upon growth of Candida maltosa in the presence of hexadecane are associated with polyphosphates.

Science.gov (United States)

Zvonarev, Anton N; Crowley, David E; Ryazanova, Lubov P; Lichko, Lydia P; Rusakova, Tatiana G; Kulakovskaya, Tatiana V; Dmitriev, Vladimir V

2017-05-01

Canals are supramolecular complexes observed in the cell wall of Candida maltosa grown in the presence of hexadecane as a sole carbon source. Such structures were not observed in glucose-grown cells. Microscopic observations of cells stained with diaminobenzidine revealed the presence of oxidative enzymes in the canals. 4΄,6΄-diamino-2-phenylindole staining revealed that a substantial part of cellular polyphosphate was present in the cell wall of cells grown on hexadecane in condition of phosphate limitation. The content and chain length of polyphosphates were higher in hexadecane-grown cells than in glucose grown ones. The treatment of cells with yeast polyphosphatase PPX1 resulted in the decrease of the canal size. These data clearly indicated that polyphosphates are constituents of canals; they might play an important role in the canal structure and functioning. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Synthesis, characterisation and biological properties of gold(III) compounds with modified bipyridine and bipyridylamine ligands.

Science.gov (United States)

Casini, Angela; Diawara, Mariam Celine; Scopelliti, Rosario; Zakeeruddin, Shaik Mohammed; Grätzel, Michael; Dyson, Paul J

2010-03-07

Square planar gold(III) complexes that contain functionalised bipyridine ligands of general formula [Au(N--N)Cl(2)][PF(6)] [where N--N = 2,2'-bipyridine, 4,4'-dimethyl-2,2'-bipyridine, 4,4'-dimethoxy-2,2'-bipyridine and 4,4'-diamino-2,2'-bipyridine] have been prepared and characterised by NMR spectroscopy and mass spectrometry. Two of the complexes have also been characterised in the solid state by X-ray crystallography. In addition, a gold(iii) compound bearing a dipyridin-2-ylamine ligand was also prepared and characterised. The complexes were found to undergo hydrolysis under pseudo-physiological conditions. Moreover, the complexes showed moderate to good cytotoxicity in vitro towards the A2780 human ovarian carcinoma cell line and the cisplatin resistant variant A2780cisR. Reactivity studies with biomolecules, such as reducing agents, plasmid DNA and a model protein (ubiquitin) were also performed to provide tentative insights into the mode of action of the complexes.

Nanostructured diamine-fullerene derivatives: computational density functional theory study and experimental evidence for their formation via gas-phase functionalization.

Science.gov (United States)

Contreras-Torres, Flavio F; Basiuk, Elena V; Basiuk, Vladimir A; Meza-Laguna, Víctor; Gromovoy, Taras Yu

2012-02-16

Nanostructure derivatives of fullerene C(60) are used in emerging applications of composite matrices, including protective and decorative coating, superadsorbent material, thin films, and lightweight high-strength fiber-reinforced materials, etc. In this study, quantum chemical calculations and experimental studies were performed to analyze the derivatives of diamine-fullerene prepared by the gas-phase solvent-free functionalization technique. In particular, the aliphatic 1,8-diamino-octane and the aromatic 1,5-diaminonaphthalene, which are diamines volatile in vacuum, were studied. We addressed two alternative mechanisms of the amination reaction via polyaddition and cross-linking of C(60) with diamines, using the pure GGA BLYP, PW91, and PBE functionals; further validation calculations were performed using the semiempirical dispersion GGA B97-D functional which contains parameters that have been specially adjusted by a more realistic view on dispersion contributions. In addition, we looked for experimental evidence for the covalent functionalization by using laser desorption/ionization time-of-flight mass spectrometry, thermogravimetric analysis, and atomic force microscopy.

R and D on Transmutation at CEA: Recent Results

International Nuclear Information System (INIS)

Royet, V.; Delahaye, T.; Lebreton, F.; Picart, S.; Caisso, M.; Gauthe, A.; Ode, D.; Tronche, E.; Bayle, J.P; Warin, D.; Bejaoui, S.; Delage, F.

2015-01-01

In the field of minor actinide transmutation in future Generation IV SFR reactor, CEA investigates in priority the recycling of Americium (Am) in the radial blankets located in the outer core area (AmBB: Americium Bearing Blankets). This paper gives an overview of the recent outcomes of the R and D programme carried out at CEA in the different fields of research: from powder elaboration to experimental irradiation. Concerning the powder elaboration, several batches have been produced by the oxalic co-conversion route as well as by the Calcined Resin Microsphere Pelletizing. Different tests have been then performed for the fabrication of pellets according to the current specifications of AmBB. For these two processes, different additional developments of innovative technologies have been achieved well adapted with the processes constraints and hot cell operating. Information on irradiation programmes (MARIOS in HFR and ongoing DIAMINO in Osiris) are presented. The next steps of the programme will then be tackled. (authors)

Solubility correlation of anthraquinone derivatives in supercritical carbon dioxide

Science.gov (United States)

Alwi, Ratna Surya; Tamura, Kazuhiro; Tanaka, Tatsuro; Shimizu, Keisuke

2017-05-01

In this work, solubilites of anthraquinone dyestuffs in supercritical carbon dioxide (sc-CO2) were correlated by semiempirical models, expressed in terms of CO2 density. All solubility data used, experimentally measured by us, and were described in details elsewhere; namely, 1,4-diaminoanthraquinone and 1,4-bis(ethylamino)anthraquinone [J. Chem. Thermo-dyn. 74, 119-125 (2014)]; 1-amino-4-hydroxyanthraquinone and 1-hydroxy-4-nitroanthraquionone [Dyes Pigm.113, 351-356 (2015)]; 1,4-diamino-2,3-dichloroanthraquinone and 1,8-dihydroxy-4,5-dinitroanthraquinone [J. Chem. Eng. Data 60, 3046-3052 (2015)], and 1-aminoanthraquinone and 1-nitroanthraquinone [J. Chem. Thermodyn. 104, 162-168 (2017)]. It was found that 1-aminoanthraquinone shows the highest solubility at 383,15 K and pressure of 25 MPa, and the solubility of anthraquinone derivatives in sc-CO2 changed by the substituent groups. Satisfactory agreement between the experimental data used and calculated solubilities of the anthraquinone derivatives was obtained.

Binding CO2 from Air by a Bulky Organometallic Cation Containing Primary Amines.

Science.gov (United States)

Luo, Yang-Hui; Chen, Chen; Hong, Dan-Li; He, Xiao-Tong; Wang, Jing-Wen; Ding, Ting; Wang, Bo-Jun; Sun, Bai-Wang

2018-03-21

The organometallic cation 1 (Fe(bipy-NH 2 ) 3 2+ , bipy-NH 2 = 4,4'-diamino-2,2'-bipyridine), which was constructed in situ in solution, can bind CO 2 from air effectively with a stoichiometric ratio of 1:4 (1/CO 2 ), through the formation of "H-bonded CO 2 " species: [CO 2 -OH-CO 2 ] - and [CO 2 -CO 2 -OH] - . These two species, along with the captured individual CO 2 molecules, connected 1 into a novel 3D (three-dimensional) architecture, that was crystal 1·2(OH - )·4(CO 2 ). The adsorption isotherms, recycling investigations, and the heat capacity of 1 have been investigated; the results revealed that the organometallic cation 1 can be recycled at least 10 times for the real-world CO 2 capture applications. The strategies presented here may provide new hints for the development of new alkanolamine-related absorbents or technologies for CO 2 capture and sequestration.

Comparative reactivity of different types of stable cyclic and acyclic mono- and diamino carbenes with simple organic substrates.

Science.gov (United States)

Martin, David; Canac, Yves; Lavallo, Vincent; Bertrand, Guy

2014-04-02

A series of stable carbenes, featuring a broad range of electronic properties, were reacted with simple organic substrates. The N,N-dimesityl imidazolylidene (NHC) does not react with isocyanides, whereas anti-Bredt di(amino)carbene (pyr-NHC), cyclic (alkyl)(amino)carbene (CAAC), acyclic di(amino)carbene (ADAC), and acyclic (alkyl)(amino)carbene (AAAC) give rise to the corresponding ketenimines. NHCs are known to promote the benzoin condensation, and we found that the CAAC, pyr-NHC, and ADAC react with benzaldehyde to give the ketone tautomer of the Breslow intermediate, whereas the AAAC first gives the corresponding epoxide and ultimately the Breslow intermediate, which can be isolated. Addition of excess benzaldehyde to the latter does not lead to benzoin but to a stable 1,3-dioxolane. Depending on the electronic properties of carbenes, different products are also obtained with methyl acrylate as a substrate. The critical role of the carbene electrophilicity on the outcome of reactions is discussed.

Two new coordination polymers constructed by naphthalene-1,4-dicarboxylic acid and 2,4-diamino-6-methyl-triazine

Energy Technology Data Exchange (ETDEWEB)

Li, Yamin, E-mail: liyamin@henu.edu.cn [Institute of Molecular and Crystal Engineering, College of Chemistry and Chemical Engineering, Henan University, Kaifeng, Henan 475004 (China); Xiao, Changyu [Institute of Molecular and Crystal Engineering, College of Chemistry and Chemical Engineering, Henan University, Kaifeng, Henan 475004 (China); Zhang, Xudong [State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002 (China); Xu, Yanhui [Department of Medical Imaging, Bethune Medical Non-Commissioned Officer' s, College, Shijiazhuang, Hebei 050081 (China); Li, Junrui; Lun, Huijie; Chen, Qi [Institute of Molecular and Crystal Engineering, College of Chemistry and Chemical Engineering, Henan University, Kaifeng, Henan 475004 (China)

2013-08-15

Two new transition metal coordination complexes, ([MnO(nda)](H{sub 2}dmt)(H{sub 2}O)){sub n} (1), [Ag{sub 5}(nda){sub 2.5}(dmt)]{sub n} (2), (H{sub 2}nda=naphthalene-1,4-dicarboxylic acid, dmt=2,4-diamine-6-methyl-1,3,5-triazine) have been hydrothermally synthesized by the reactions of H{sub 2}nda and dmt with the homologous MnCl{sub 2}·4H{sub 2}O and AgNO{sub 3}, respectively, and characterized by single-crystal X-ray diffraction, IR spectra, elemental analysis, thermogravimetric analysis (TGA). The compound 1 exhibits a 3D network comprising 1D metal chain (MnO(CO{sub 2}){sub 2}){sub n} connected by the ligand nda{sup 2−}, featuring a four-connected uninodal diamond -like topology. In compound 2, it is firstly observed that decanuclear silver units as secondary building units to construct 3D network by the ligands dmt and nda{sup 2−}, with a rare 2-nodal (3,8)-connected tfz-d topology ((4{sup 3}){sub 2}(4{sup 6}.6{sup 18}.8{sup 4})). The interactions within each Mn(II)—Mn(II) pair of compound 1 are antiferromagnetic (g=2.07, J=−1.42(1) cm{sup −1}, zj′=−0.73(2) cm{sup −1}). In addition, compound 2 exhibits photoluminescent property at about 472 nm (λ{sub ex}=394 nm). - Graphical abstract: Two new transition metal coordination complexes 1–2 have been hydrothermally synthesized and characterized by single-crystal X-ray diffraction, IR spectra, elemental analysis thermogravimetric analysis (TGA). Highlights: • The compound 1 exhibits a 3D network with four-connected uninodal diamond-like topology. • The first 3D network of 2 with a rare tfz-d topology consists of decanuclear silver clusters as secondary building units. • The magnetic measurement indicates the compound 1 shows antiferromagnetic interactions. • The photoluminescent property of 2 has been measured.

Synthesis and antiviral activity of 2,4-diamino-5-cyano-6-[2-(phosphonomethoxy)ethoxy]pyrimidine and related compounds

Czech Academy of Sciences Publication Activity Database

Hocková, Dana; Holý, Antonín; Masojídková, Milena; Andrei, G.; Snoeck, R.; De Clercq, E.; Balzarini, J.

2004-01-01

Roč. 12, č. 12 (2004), s. 3197-3202 ISSN 0968-0896 R&D Projects: GA AV ČR IBS4055109 Grant - others:ISEP/FORTIS(US) GOA-00/12; European Commission(XE) HPAW-2002-90001 Institutional research plan: CEZ:AV0Z4055905 Keywords : nucleotide analogues * antiviral * pyrimidines Subject RIV: CC - Organic Chemistry Impact factor: 2.018, year: 2004

High-nitrogen explosives

Energy Technology Data Exchange (ETDEWEB)

Naud, D. (Darren); Hiskey, M. A. (Michael A.); Kramer, J. F. (John F.); Bishop, R. L. (Robert L.); Harry, H. H. (Herbert H.); Son, S. F. (Steven F.); Sullivan, G. K. (Gregg K.)

2002-01-01

The syntheses and characterization of various tetrazine and furazan compounds offer a different approach to explosives development. Traditional explosives - such as TNT or RDX - rely on the oxidation of the carbon and hydrogen atoms by the oxygen carrying nitro group to produce the explosive energy. High-nitrogen compounds rely instead on large positive heats of formation for that energy. Some of these high-nitrogen compounds have been shown to be less sensitive to initiation (e.g. by impact) when compared to traditional nitro-containing explosives of similar performances. Using the precursor, 3,6-bis-(3,5-dimethylpyrazol-1-yl)-s-tetrazine (BDT), several useful energetic compounds based on the s-tetrazine system have been synthesized and studied. The compound, 3,3{prime}-azobis(6-amino-s-tetrazine) or DAAT, detonates as a half inch rate stick despite having no oxygen in the molecule. Using perfluoroacetic acid, DAAT can be oxidized to give mixtures of N-oxide isomers (DAAT03.5) with an average oxygen content of about 3.5. This energetic mixture burns at extremely high rates and with low dependency on pressure. Another tetrazine compound of interest is 3,6-diguanidino-s-tetrazine(DGT) and its dinitrate and diperchlorate salts. DGT is easily synthesized by reacting BDT with guanidine in methanol. Using Caro's acid, DGT can be further oxidized to give 3,6-diguanidino-s-tetrazine-1,4-di-N-oxide (DGT-DO). Like DGT, the di-N-oxide can react with nitric acid or perchloric acid to give the dinitrate and the diperchlorate salts. The compounds, 4,4{prime}-diamino-3,3{prime}-azoxyfurazan (DAAF) and 4,4{prime}-diamino-3,3{prime}-azofurazan (DAAzF), may have important future roles in insensitive explosive applications. Neither DAAF nor DAAzF can be initiated by laboratory impact drop tests, yet both have in some aspects better explosive performances than 1,3,5-triamino-2,4,6-trinitrobenzene TATB - the standard of insensitive high explosives. The thermal stability of DAAz

Comportamento termomecânico de compósitos ativos preparados com nanocompósitos epóxi/argila organofílica e fios de liga Ni-Ti com memória de forma Thermomechanical behavior of active composites prepared with epoxy/organoclay nanocomposites and Ni-Ti shape memory alloy wires

Directory of Open Access Journals (Sweden)

Artur S. C. Leal

2012-01-01

Full Text Available Neste trabalho, nanocompósitos epóxi/argila organofílica foram selecionados como matriz por apresentarem valores de temperatura de transição vítrea (Tg e estabilidade térmica suficientemente alta para que fios de uma liga com memória de forma (LMF possam ser incorporados. Para tanto, quatro frações volumétricas de fios LMF de Ni-Ti (1,55, 2,56, 3,57 e 4,54% foram embebidas na matriz epoxídica diglicidil éter do bisfenol-A (DGEBA, reticulada com a amina aromática 4,4’-diamino difenil sulfona (DDS contendo 1 pcr da argila bentonita purificada organofiliada (APOC. A formação do nanocompósito foi confirmada por análise de difração de raio X, enquanto a transformação de fase dos fios de Ni-Ti foi determinada por análise dinâmico-mecânica (DMA. As amostras dos compósitos ativos preparados a partir da matriz de nanocompósito e fios de Ni-Ti foram caracterizadas principalmente por DMA. De acordo com os resultados obtidos foi constatada uma recuperação do módulo de armazenamento do compósito ativo durante o aquecimento na faixa de transformação de fase dos fios de Ni-Ti quando a fração volumétrica foi mantida em torno de 3,5%.In this work, epoxy/organoclay nanocomposites were selected as matrix for presenting high enough glass transition temperature (Tg and thermal stability values in order to be incorporated in shape memory alloys (SMA. Four volume fractions of SMA wires containing Ni-Ti (1.55, 2.56, 3.57 and 4.54% were embedded in diglycidyl ether of bisphenol A (DGEBA, cured with the aromatic amine 4,4’-diamino diphenyl sulfone (DDS and containing 1 phr of purified organobentonite (APOC. The formation of nanocomposite was confirmed by X ray diffraction analysis, while the phase transformation of Ni-Ti wires was determined by dynamic mechanical analysis (DMA. Samples of the active composites prepared from nanocomposite matrix and Ni-Ti wires were mainly characterized by DMA. A recovery of the storage modulus of

Effect of the Dispersibility of Nano-CuO Catalyst on Heat Releasing of AP/HTPB Propellant

International Nuclear Information System (INIS)

Yang, Y.; Yu, X.; Wang, J.; Wang, Y.

2011-01-01

Kneading time is adjusted to change the dispersibility of nano-CuO in AP/HTPB (Ammonia Perchlorate/Hydroxyl-Terminated Polybutadiene) composite propellants. Nano-CuO/AP is prepared to serve as the other dispersing method of nano-CuO, named pre dispersing procedure. Several kinds of heat releasing, thermal decomposition by DSC, combustion heat in oxygen environment, and explosion heat in nitrogen environment, are characterized to learn the effect of dispersibility of nano-CuO catalyst on heat releasing of propellants. With pre-dispersing procedures, thermal decomposition temperature of nano-CuO/AP and its propellant are about 25 degree C and 8.6 degree C lower than that of AP simple mixed with nano-CuO and its propellant, respectively. Comparing propellant with simple mixed nano-CuO kneading 3 hours, combustion heat and explosion heat of propellant with nano-CuO/AP increase about 1.4% and 1.7%, respectively. However, because of the breaking of nano-CuO/AP structure during kneading procedure, combustion heat and explosion heat of all the samples are decreased with the increase of kneading time after 3 hours.

A six degree-of-freedom thrust sensor for a labscale hybrid rocket

Science.gov (United States)

Wright, Ann M.; Wright, Andrew B.; Born, Traig; Strickland, Ryan

2013-12-01

A six degree-of-freedom thrust sensor was designed, constructed, calibrated, and tested using the labscale hybrid rocket at the University of Arkansas at Little Rock. The system consisted of six independent legs: one parallel to the axis of symmetry of the rocket for main thrust measurement, two vertical legs near the nozzle end of the rocket, one vertical leg near the oxygen input end of the rocket, and two separated horizontal legs near the nozzle end. Each leg was composed of a rotational bearing, a load cell, and a universal joint above and below the load cell. The leg was designed to create point contact along only one direction and minimize the non-axial forces applied to the load cell. With this system, force in each direction and moments for roll, pitch, and yaw can be measured. The system was calibrated and tested using a labscale hybrid rocket using gaseous oxygen and hydroxyl-terminated polybutadiene solid fuel. The thrust stand proved to be stable during calibration tests. Thrust force vector components and roll, pitch, and yaw moments were calculated for test firings with an oxygen mass flow rate range of 0.0174-0.0348 kg s-1.

Hyundai plans rubber unit despite overcapacity

International Nuclear Information System (INIS)

Hyoungjin Kim.

1993-01-01

Despite the oversupply of synthetic rubber in South Korea, the government has granted approval to Hyundai Petrochemical (Seoul) to build the country's second synthetic rubber unit, to be located alongside its petrochemical complex at Daesan. The plant is due for startup during second-half 1995, when the local market is expected to be in better balance. Hyundai will use Goodyear Tire ampersand Rubber technology for the plant, which will have annual capacities for 40,000 m.t. of polybutadiene rubber (BR), 30,000 m.t. of styrene butadiene rubber (SBR) and 12,000 m.t. of nitrile rubber (NBR). Styrene and butadiene requirements will be met from Hyundai's own production at Daesan. The current local producer of synthetic rubber is Korea Kumho Petrochemicals (Seoul), which has annual capacities for 150,000 m.t. of SBR, 95,000 m.t. of BR, and 10,000 m.t. of NBR. Korean SBR demand is about 141,000 m.t./year but is expected to increase to 161,000 m.t./year by 1996 and reach 194,000 m.t./year by the end of the decade

Chemical vapor deposition graphene transfer process to a polymeric substrate assisted by a spin coater

International Nuclear Information System (INIS)

Kessler, Felipe; Da Rocha, Caique O C; Medeiros, Gabriela S; Fechine, Guilhermino J M

2016-01-01

A new method to transfer chemical vapor deposition graphene to polymeric substrates is demonstrated here, it is called direct dry transfer assisted by a spin coater (DDT-SC). Compared to the conventional method DDT, the improvement of the contact between graphene-polymer due to a very thin polymeric film deposited by spin coater before the transfer process prevented air bubbles and/or moisture and avoided molecular expansion on the graphene-polymer interface. An acrylonitrile-butadiene-styrene copolymer, a high impact polystyrene, polybutadiene adipate-co-terephthalate, polylactide acid, and a styrene-butadiene-styrene copolymer are the polymers used for the transfers since they did not work very well by using the DDT process. Raman spectroscopy and optical microscopy were used to identify, to quantify, and to qualify graphene transferred to the polymer substrates. The quantity of graphene transferred was substantially increased for all polymers by using the DDT-SC method when compared with the DDT standard method. After the transfer, the intensity of the D band remained low, indicating low defect density and good quality of the transfer. The DDT-SC transfer process expands the number of graphene applications since the polymer substrate candidates are increased. (paper)

CSP-based chemical kinetics mechanisms simplification strategy for non-premixed combustion: An application to hybrid rocket propulsion

KAUST Repository

Ciottoli, Pietro P.

2017-08-14

A set of simplified chemical kinetics mechanisms for hybrid rocket applications using gaseous oxygen (GOX) and hydroxyl-terminated polybutadiene (HTPB) is proposed. The starting point is a 561-species, 2538-reactions, detailed chemical kinetics mechanism for hydrocarbon combustion. This mechanism is used for predictions of the oxidation of butadiene, the primary HTPB pyrolysis product. A Computational Singular Perturbation (CSP) based simplification strategy for non-premixed combustion is proposed. The simplification algorithm is fed with the steady-solutions of classical flamelet equations, these being representative of the non-premixed nature of the combustion processes characterizing a hybrid rocket combustion chamber. The adopted flamelet steady-state solutions are obtained employing pure butadiene and gaseous oxygen as fuel and oxidizer boundary conditions, respectively, for a range of imposed values of strain rate and background pressure. Three simplified chemical mechanisms, each comprising less than 20 species, are obtained for three different pressure values, 3, 17, and 36 bar, selected in accordance with an experimental test campaign of lab-scale hybrid rocket static firings. Finally, a comprehensive strategy is shown to provide simplified mechanisms capable of reproducing the main flame features in the whole pressure range considered.

Photolithographic fabrication of solid–liquid core waveguides by thiol-ene chemistry

International Nuclear Information System (INIS)

Sagar, Kaushal; Gopalakrishnan, Nimi; Christiansen, Mads Brøkner; Kristensen, Anders; Ndoni, Sokol

2011-01-01

In this work we demonstrate an efficient and cleanroom compatible method for the fabrication of solid–liquid core waveguides based on nanoporous polymers. We have used thiol-ene photo-grafting to tune and pattern the hydrophilicity of an originally hydrophobic nanoporous 1, 2-polybutadiene. The generated refractive index contrast between the patterned water-filled volume and the surrounding empty hydrophobic porous polymer allows for light confinement within the water-filled volume—the solid–liquid core. The presented fabrication process is simple and fast. It allows a high degree of flexibility on the type and grade of surface chemistry imparted to the large nanoporous area depending upon the application. The fabrication does not need demanding chemical reaction conditions. Thus, it can be readily used on a standard silicon lithography bench. The propagation loss values reported in this work are comparable with literature values for state-of-the-art liquid-core waveguide devices. The demonstrated waveguide function added to the nanoporous polymer with a very high internal surface area makes the system interesting for many applications in different areas, such as diagnostics and bio-chemical sensing

Acoustic Pressure Oscillations Induced in I-Burner

Science.gov (United States)

Matsui, Kiyoshi

Iwama et al. invented the I-burner to investigate acoustic combustion instability in solid-propellant rockets (Proceedings of ICT Conference, 1994, pp. 26-1 26-14). Longitudinal pressure oscillations were induced in the combustion chamber of a thick-walled rocket by combustion of a stepped-perforation grain (I-burner). These oscillations were studied here experimentally. Two I-burners with an internal diameter of 80 mm and a length of 1208 mm or 2240 mm were made. The grain had stepped perforations (20 and 42 mm in diameter and 657 and 160 mm in length, respectively). Longitudinal pressure oscillations always occur in two stages when an HTPB (hydroxyl-terminated polybutadiene)/AP (ammonium perchlorate)/aluminum-powder propellant burns (54 tests; the highest average pressure in the combustion chamber was 9.5 29 MPa), but no oscillations occur when an HTPB/AP propellant burns (29 tests). The pressure oscillations are essentially linear, but dissipation adds a nonlinear nature to them. In the first stage, the amplitudes are small and the first wave group predominates. In the next stage, the amplitudes are large and many wave groups are present. The change in the grain form accompanying the combustion affects the pressure oscillations.

Constitutive Curve and Velocity Profile in Entangled Polymers during Start-Up of Steady Shear Flow

KAUST Repository

Hayes, Keesha A.

2010-05-11

Time-dependent shear stress versus shear rate, constitutive curve, and velocity profile measurements are reported in entangled polymer solutions during start-up of steady shear flow. By combining confocal microscopy and particle image velocimetry (PIV), we determine the time-dependent velocity profile in polybutadiene and polystyrene solutions seeded with fluorescent 150 nm silica and 7.5 μm melamine particles. By comparing these profiles with time-dependent constitutive curves obtained from experiment and theory, we explore the connection between transient nonmonotonic regions in the constitutive curve for an entangled polymer and its susceptibility to unstable flow by shear banding [Adams et al. Phys. Rev. Lett. 2009, 102, 067801-4]. Surprisingly, we find that even polymer systems which exhibit transient, nonmonotonic shear stress-shear rate relationships in bulk rheology experiments manifest time-dependent velocity profiles that are decidedly linear and show no evidence of unstable flow. We also report that interfacial slip plays an important role in the steady shear flow behavior of entangled polymers at shear rates above the reciprocal terminal relaxation time but has little, if any, effect on the shape of the velocity profile. © 2010 American Chemical Society.

Synthesis, characterization and self-assembly of well-defined linear heptablock quaterpolymers

KAUST Repository

Ntaras, Christos

2016-05-17

Two well-defined heptablock quaterpolymers of the ABCDCBA type [Α: polystyrene (PS), B: poly(butadiene) with ∼90% 1,4-microstructure (PB1,4), C: poly(isoprene) with ∼55% 3,4-microstructure (PI3,4) and D: poly(dimethylsiloxane) (PDMS)] were synthesized by combining anionic polymerization high vacuum techniques and hydrosilylation/chlorosilane chemistry. All intermediates and final products were characterized by size exclusion chromatography, membrane osmometry, and proton nuclear magnetic resonance spectroscopy. Fourier transform infrared spectroscopy was used to further verify the chemical modification reaction of the difunctional PDMS. The self-assembly in bulk of these novel heptablock quarterpolymers, studied by transmission electron microscopy and small angle X-ray scattering, revealed 3-phase 4-layer alternating lamellae morphology of PS, PB1,4, and mixed PI3,4/PDMS domains. Differential scanning calorimetry was used to further confirm the miscibility of PI3,4 and PDMS blocks. It is the first time that PDMS is the central segment in such multiblock polymers (≥3 chemically different blocks). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016, 54, 1443–1449. © 2016 Wiley Periodicals, Inc.

Scaling behavior of free-volume holes in polymers probed by positron annihilation

Science.gov (United States)

Wang, C. L.; Wang, S. J.

1995-04-01

Positron lifetimes in polybutadiene (PB) and polypropylene (PP) are measured as functions of temperature in the range 95-305 K and 95-370 K, respectively. From the variations of ortho-positronium (o-Ps) lifetime τ3, we have determined the glass transition temperatures Tg in PB and PP and the excluding temperature Te in PB, beyond which the o-Ps lifetime τ3 in PB is saturated. From the analogy of the temperature-dependent o-Ps intensity I3 in PB and PP, high- and low-density polyethylene (HDPE and LDPE), we propose that above the glass transition temperature Tg the o-Ps intensity I3 exhibits the scaling relation I3~(T-Tg)β in these polymers. The data also indicate the existence of a crossover temperature Tc, located above Tg, where the β value changes greatly. When TgHDPE and LDPE [D. Lin and S. J. Wang, J. Phys. Condens. Matter 4, 3331 (1992)]. The β values in the region of TcHDPE and branched LDPE, respectively. These results reveal a common picture of hole creation above Tg in polymers, however, the concrete value of β may be associated with the branching structure of macromolecules.

Communication: Proton NMR dipolar-correlation effect as a method for investigating segmental diffusion in polymer melts

International Nuclear Information System (INIS)

Lozovoi, A.; Mattea, C.; Stapf, S.; Herrmann, A.; Rössler, E. A.; Fatkullin, N.

2016-01-01

A simple and fast method for the investigation of segmental diffusion in high molar mass polymer melts is presented. The method is based on a special function, called proton dipolar-correlation build-up function, which is constructed from Hahn Echo signals measured at times t and t/2. The initial rise of this function contains additive contributions from both inter- and intramolecular magnetic dipole-dipole interactions. The intermolecular contribution depends on the relative mean squared displacements (MSDs) of polymer segments from different macromolecules, while the intramolecular part reflects segmental reorientations. Separation of both contributions via isotope dilution provides access to segmental displacements in polymer melts at millisecond range, which is hardly accessible by other methods. The feasibility of the method is illustrated by investigating protonated and deuterated polybutadiene melts with molecular mass 196 000 g/mol at different temperatures. The observed exponent of the power law of the segmental MSD is close to 0.32 ± 0.03 at times when the root MSD is in between 45 Å and 75 Å, and the intermolecular proton dipole-dipole contribution to the total proton Hahn Echo NMR signal is larger than 50% and increases with time.

Host polymer influence on dilute polystyrene segmental dynamics

Science.gov (United States)

Lutz, T. R.

2005-03-01

We have utilized deuterium NMR to investigate the segmental dynamics of dilute (2%) d3-polystyrene (PS) chains in miscible polymer blends with polybutadiene, poly(vinyl ethylene), polyisoprene, poly(vinyl methylether) and poly(methyl methacrylate). In the dilute limit, we find qualitative differences depending upon whether the host polymer has dynamics that are faster or slower than that of pure PS. In blends where PS is the fast (low Tg) component, segmental dynamics are slowed upon blending and can be fit by the Lodge-McLeish model. When PS is the slow (high Tg) component, PS segmental dynamics speed up upon blending, but cannot be fit by the Lodge-McLeish model unless a temperature dependent self-concentration is employed. These results are qualitatively consistent with a recent suggestion by Kant, Kumar and Colby (Macromolecules, 2003, 10087), based upon data at higher concentrations. Furthermore, as the slow component, we find the segmental dynamics of PS has a temperature dependence similar to that of its host. This suggests viewing the high Tg component dynamics in a miscible blend as similar to a polymer in a low molecular weight solvent.

In vitro activity of 2,4-diamino-6-[2-(phosphonomethoxy)ethoxy]-pyrimidine against multidrug-resistant hepatitis B virus mutants

Czech Academy of Sciences Publication Activity Database

Brunelle, M. N.; Lucifora, J.; Neyts, J.; Villet, S.; Holý, Antonín; Trepo, C.; Zoulim, F.

2007-01-01

Roč. 51, č. 6 (2007), s. 2240-2243 ISSN 0066-4804 R&D Projects: GA MŠk 1M0508; GA AV ČR 1QS400550501 Grant - others:ViRgil(XE) LSHM-CT-2004-503359; Descartes Prize(XE) HPAW-CT-2002-9001 Institutional research plan: CEZ:AV0Z40550506 Keywords : tenofovir-disoproxil-fumarate * adefovir dipivoxil * lamivudine * entecavir * nucleoside Subject RIV: CC - Organic Chemistry Impact factor: 4.390, year: 2007

Pronounced in vitro and in vivo antiretroviral activity of 5-substituted 2,4-diamino-6-[2-(phosphonomethoxy)ethoxy] pyrimidines

Czech Academy of Sciences Publication Activity Database

Balzarini, J.; Schols, D.; Van Laethem, K.; De Clercq, E.; Hocková, Dana; Masojídková, Milena; Holý, Antonín

2007-01-01

Roč. 59, č. 1 (2007), s. 80-86 ISSN 0305-7453 R&D Projects: GA MŠk 1M0508; GA AV ČR IBS4055109; GA AV ČR 1QS400550501 Grant - others:ISEP/FORTIS(XE) GOA/2005/19 Institutional research plan: CEZ:AV0Z40550506 Keywords : acyclic nucleoside phosphonates * antiretroviral drugs * HIV * MSV * PMEO-DAPy Subject RIV: CC - Organic Chemistry Impact factor: 4.038, year: 2007

Effect of telechelic ionic groups on the dispersion of organically modified clays in bisphenol A polycarbonate nanocomposites by in-situ polymerization using activated carbonates

Directory of Open Access Journals (Sweden)

M. Colonna

2017-05-01

Full Text Available Nanocomposites of bisphenol A polycarbonate with organically modified clays have been prepared for the first time by in-situ polymerization using bis(methyl salicyl carbonate as activated carbonate. The use of the activated carbonate permits to conduct the polymerization reaction at lower temperature and with shorter polymerization time with respect to those necessary for traditional melt methods that uses diphenyl carbonate, affording a nanocomposite with improved color. Moreover, an imidazolium salt with two long alkyl chains has been used to modify the montmorillonite, providing an organically modified clay with high thermal stability and wide d-spacing. The addition of ionic groups at the end of the polymer chain increases the interaction between the clay surface and the polymer producing a better dispersion of the clay. The presence of the clay increases the thermal stability of the polymer.

Morphology and contact angle studies of poly(styrene-co-acrylonitrile modified epoxy resin blends and their glass fibre reinforced composites

Directory of Open Access Journals (Sweden)

2007-06-01

Full Text Available In this study, the surface characteristics of blends and composites of epoxy resin were investigated. Poly(styrene-co-acylonitrile (SAN was used to modify diglycedyl ether of bisphenol-A (DGEBA type epoxy resin cured with diamino diphenyl sulfone (DDS and the modified epoxy resin was used as the matrix for fibre reinforced composites (FRP’s. E-glass fibre was used as the fibre reinforcement. The scanning electron micrographs of the fractured surfaces of the blends and composites were analyzed. Morphological analysis revealed different morphologies such as dispersed, cocontinuous and phase-inverted structures for the blends. Contact angle studies were carried out using water and methylene iodide at room temperature. The solid surface energy was calculated using harmonic mean equations. Blending of epoxy resin increases its contact angle. The surface free energy, work of adhesion, interfacial free energy, spreading coefficient and Girifalco-Good’s interaction parameter were changed significantly in the case of blends and composites. The incorporation of thermoplastic and glass fibre reduces the wetting and hydrophilicity of epoxy resin.

Production, Quality Control and Biological Evaluation of 166Ho-PDTMP as a Possible Bone Palliation Agent

Directory of Open Access Journals (Sweden)

Samaneh Zolghadri

2013-05-01

Full Text Available Objective(s:In this study, 166Ho-1,2-propylene di-amino tetra(methy1enephosphonicAcid (166Ho-PDTMP complex  was prepared as a bone palliation agent. Materials and Methods:The complex was successfully prepared using an in-house synthesized EDTMP ligand and 166HoCl3. Ho-166 chloride was obtained by thermal neutron irradiation (1 × 1013 n.cm-2.s-1 of natural Ho(NO33 samples  followed by radiolabeling and stability studies. Biodistribution in wild type rats was also peformed. Results: The complex was prepared with thespecific activity of 278 GBq/mg and high radiochemical purity (>99%, checked by ITLC. 166Ho-PDTMP complex was stabilized in the final preparation and in the presence of human serum (>90% up to 72 hr. The biodistribution of 166Ho-PDTMP in wild-type rats demonstrated significant bone uptake was up to 48 hr compared to 166HoCl3. Conclusion: The produced 166Ho-PDTMP properties suggest a possible new bone palliative therapeutic to overcome the metastatic bone pains.  

Bifunctionalized Intrinsically Microporous Polyimides with Simultaneously Enhanced Gas Permeability and Selectivity

KAUST Repository

Ma, Xiaohua; Mukaddam, Mohsin Ahmed; Pinnau, Ingo

2016-01-01

Two novel intrinsically microporous copolyimides synthesized by condensation reaction of 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA), 3,3,3′,3′-tetramethyl-1,1′-spirobisindane-5,5′-diamino-6,6′-diol, and 3,5-diaminobenzoic acid with diamine ratios of 80/20 (Co-80/20) and 50/50 (Co-50/50) are reported. Unexpectedly, the Co-80/20 not only demonstrates higher microporosity (300 m2 g−1) than the PIM-6FDA-OH homopolymer (190 m2 g−1) but also exhibits simultaneously enhanced CO2 permeability (from 119 to 171 Barrer) and CO2/CH4 selectivity (from 35 to 41) after thermal annealing at 250 °C. This higher permeability originates from enhanced diffusivity (D CO2) and the higher selectivity results from its increased diffusion selectivity (D CO2/D CH4). After crosslinking at 300 °C, the Co-80/20 exhibits an even higher CO2 permeability (261 Barrer) and almost unchanged CO2/CH4 selectivity.

Effects of nucleotide pool imbalances on the excision repair of ultraviolet-induced damage in the DNA of human diploid fibroblasts

International Nuclear Information System (INIS)

Snyder, R.D.

1985-01-01

In an attempt to better understand the mechanism of repair inhibition by DNA polymerase inhibitors, and the nature of hydroxyurea enhancement, experiments were initiated in which the effects of a series of ribonucleotide reductase inhibitors on dNTP pools and on the DNA repair process were determined in both quiescent cultures and log-phase cultures of human fibroblasts. It was determined that hydroxyurea, deoxyadenosine, pyridine-2-carboxaldehyde thiosemicarbazone (TSC), pyrozoloimidazole (IMPY), 3,5-diamino-1,2,4-triazole (guanazole), 3,4,5-trihydroxy benzohydroxamic acid (THBA) and 3,4-dihydroxy benzohydroxamic acid (DHBA) are all effective inhibitors of the DNA repair process in confluent cells but not in log-phase cells. Moreover, the effects of these inhibitors can be reversed by the addition of certain combinations of deoxynucleosides. These reversal studies and the direct analysis of dNTP pool modulation by these compounds in log phase and confluent cultures support the notion that specific pool depletions rather than general imbalance of pools gives rise to the inhibition of the DNA excision repair process

Manganese L-edge X-ray absorption spectroscopy of manganese catalase from Lactobacillus plantarum and mixed valence manganese complexes

Energy Technology Data Exchange (ETDEWEB)

Grush, M.M.; Chen, J.; George, S.J. [Univ. of California, Davis, CA (United States)] [and others

1996-01-10

The first Mn L-edge absorption spectra of a Mn metalloprotein are presented in this paper. Both reduced and superoxidized Mn catalase have been examined by fluorescence-detected soft X-ray absorption spectroscopy, and their Mn L-edge spectra are dramatically different. The spectrum of reduced Mn(II)Mn(II) catalase has been interpreted by ligand field atomic multiplet calculations and by comparison to model compound spectra. The analysis finds a 10 Dq value of nearly 1.1 eV, consistent with coordination by predominately nitrogen and oxygen donor ligands. For interpretation of mixed valence Mn spectra, an empirical simulation procedure based on the addition of homovalent model compound spectra has been developed and was tested on a variety of Mn complexes and superoxidized Mn catalase. This routine was also used to determine the oxidation state composition of the Mn in [Ba{sub 8}Na{sub 2}ClMn{sub 16}(OH){sub 8}(CO{sub 3}){sub 4}L{sub 8}] .53 H{sub 2}O (L=1,3-diamino-2-hydroxypropane-N,N,N`N`-tetraacetic acid). 27 refs., 6 figs.

Pre-treatment of pyridine wastewater by new cathodic-anodic-electrolysis packing.

Science.gov (United States)

Jin, Yang; Yue, Qinyan; Yang, Kunlun; Wu, Suqing; Li, Shengjie; Gao, Baoyu; Gao, Yuan

2018-01-01

A novel cathodic-anodic-electrolysis packing (CAEP) used in the treatment of pyridine wastewater was researched, which mainly consisted of 4,4'-diamino-2,2'-disulfonic acid (DSD acid) industrial iron sludge. The physical properties and morphology of the packing were studied. The CAEP was used in a column reactor during the pretreatment of pyridine wastewater. The influence of pH, hydraulic retention time (HRT), the air-liquid ratio (A/L) and the initial concentration of pyridine were investigated by measuring the removal of total organic carbon (TOC) and pyridine. The characterization results showed that the bulk density, grain density, water absorption percentage and specific surface area were 921kg/m 3 , 1086kg/m 3 , 25% and 29.89m 2 /g, respectively; the removal of TOC and pyridine could reach 50% and 58% at the optimal experimental conditions (pH=3, HRT=8hr, A/L=2). Notably, the surface of the packing was renewed constantly during the running of the filter, and the handling capacity was stable after running for three months. Copyright © 2017. Published by Elsevier B.V.

Composite materials for thermal energy storage

Science.gov (United States)

Benson, D. K.; Burrows, R. W.; Shinton, Y. D.

1985-01-01

A composite material for thermal energy storage based upon polyhydric alcohols, such as pentaerythritol, trimethylol ethane (also known as pentaglycerine), neopentyl glycol and related compounds including trimethylol propane, monoaminopentaerythritol, diamino-pentaerythritol and tris(hydroxymethyl)acetic acid, separately or in combinations, which provide reversible heat storage through crystalline phase transformations are discussed. These PCM's do not become liquid during use and are in contact with at least one material selected from the group consisting of metals, carbon, siliceous, plastic, cellulosic, natural fiber, artificial fiber, concrete, gypsum, porous rock, and mixtures thereof. Particulate additions such as aluminum or graphite powders, as well as metal and carbon fibers can also be incorporated therein. Particulate and/or fibrous additions can be introduced into molten phase change materials which can then be cast into various shapes. After the phase change materials have solidified, the additions will remain dispersed throughout the matrix of the cast solid. The polyol is in contact with at least one material selected from the group consisting of metals, carbon, siliceous, plastic, cellulosic, natural fiber, artificial fiber, concrete, gypsum, and mixtures thereof.

Composite materials for thermal energy storage

Science.gov (United States)

Benson, D.K.; Burrows, R.W.; Shinton, Y.D.

1985-01-04

A composite material for thermal energy storage based upon polyhydric alcohols, such as pentaerythritol, trimethylol ethane (also known as pentaglycerine), neopentyl glycol and related compounds including trimethylol propane, monoaminopentaerythritol, diamino-pentaerythritol and tris(hydroxymethyl)acetic acid, separately or in combinations, which provide reversible heat storage through crystalline phase transformations. These PCM's do not become liquid during use and are in contact with at least one material selected from the group consisting of metals, carbon, siliceous, plastic, cellulosic, natural fiber, artificial fiber, concrete, gypsum, porous rock, and mixtures thereof. Particulate additions such as aluminum or graphite powders, as well as metal and carbon fibers can also be incorporated therein. Particulate and/or fibrous additions can be introduced into molten phase change materials which can then be cast into various shapes. After the phase change materials have solidified, the additions will remain dispersed throughout the matrix of the cast solid. The polyol is in contact with at least one material selected from the group consisting of metals, carbon, siliceous, plastic, cellulosic, natural fiber, artificial fiber, concrete, gypsum, and mixtures thereof.

Solving the problem of building models of crosslinked polymers: an example focussing on validation of the properties of crosslinked epoxy resins.

Science.gov (United States)

Hall, Stephen A; Howlin, Brendan J; Hamerton, Ian; Baidak, Alex; Billaud, Claude; Ward, Steven

2012-01-01

The construction of molecular models of crosslinked polymers is an area of some difficulty and considerable interest. We report here a new method of constructing these models and validate the method by modelling three epoxy systems based on the epoxy monomers bisphenol F diglycidyl ether (BFDGE) and triglycidyl-p-amino phenol (TGAP) with the curing agent diamino diphenyl sulphone (DDS). The main emphasis of the work concerns the improvement of the techniques for the molecular simulation of these epoxies and specific attention is paid towards model construction techniques, including automated model building and prediction of glass transition temperatures (T(g)). Typical models comprise some 4200-4600 atoms (ca. 120-130 monomers). In a parallel empirical study, these systems have been cast, cured and analysed by dynamic mechanical thermal analysis (DMTA) to measure T(g). Results for the three epoxy systems yield good agreement with experimental T(g) ranges of 200-220°C, 270-285°C and 285-290°C with corresponding simulated ranges of 210-230°C, 250-300°C, and 250-300°C respectively.

Nanoporous Copper-Silver Alloys by Additive-Controlled Electrodeposition for the Selective Electroreduction of CO2 to Ethylene and Ethanol.

Science.gov (United States)

Hoang, Thao T H; Verma, Sumit; Ma, Sichao; Fister, Tim T; Timoshenko, Janis; Frenkel, Anatoly I; Kenis, Paul J A; Gewirth, Andrew A

2018-05-02

Electrodeposition of CuAg alloy films from plating baths containing 3,5-diamino-1,2,4-triazole (DAT) as an inhibitor yields high surface area catalysts for the active and selective electroreduction of CO 2 to multicarbon hydrocarbons and oxygenates. EXAFS shows the co-deposited alloy film to be homogeneously mixed. The alloy film containing 6% Ag exhibits the best CO 2 electroreduction performance, with the Faradaic efficiency for C 2 H 4 and C 2 H 5 OH production reaching nearly 60 and 25%, respectively, at a cathode potential of just -0.7 V vs RHE and a total current density of ∼ - 300 mA/cm 2 . Such high levels of selectivity at high activity and low applied potential are the highest reported to date. In situ Raman and electroanalysis studies suggest the origin of the high selectivity toward C 2 products to be a combined effect of the enhanced stabilization of the Cu 2 O overlayer and the optimal availability of the CO intermediate due to the Ag incorporated in the alloy.

Aromatic C-nitrosation of a bioactive molecule. Nitrosation of minoxidil.

Science.gov (United States)

González-Jiménez, Mario; Arenas-Valgañón, Jorge; Calle, Emilio; Casado, Julio

2011-10-26

Minoxidil (2,4-diamino-6-(piperidin-1'-yl)pyrimidine N(3)-oxide; CASRN 38304-91-5) is a bioactive molecule with several nitrosatable groups widely used as an antihypertensive and antialopecia agent. Here the nitrosation of minoxidil was investigated. The conclusions drawn are as follows: (i) In the pH = 2.3-5.0 range, the minoxidil molecule undergoes aromatic C-nitrosation by nitrite. The dominant reaction was C-5 nitrosation through a mechanism that appears to consist of an electrophilic attack on the nitrosatable substrate by H(2)NO(2)(+)/NO(+), followed by a slow proton transfer; (ii) the reactivity of minoxidil as a C-nitrosatable substrate proved to be 7-fold greater than that of phenol, this being attributed to the preferred para- and ortho-orientations of the two -NH(2) groups at positions 2 and 4 of the minoxidil molecule, which activate electrophilic substitution in the C-5 position through their mesomeric effect. The N-nitrosominoxidil resulting from the nitrosation could be potentially harmful to the minoxidil users.

Synthesis and gas transport properties of hydroxyl-functionalized polyimides with intrinsic microporosity

KAUST Repository

Ma, Xiaohua

2012-05-08

A newly designed diamine monomer, 3,3,3′,3′-tetramethyl-1, 1′-spirobisindane-5,5′-diamino-6,6′-diol, was successfully used to synthesize two types of polyimides for membrane-based gas separation applications. The novel polymers integrate significant microporosity and polar hydroxyl groups, showing the combined features of polymers of intrinsic microporosity (PIMs) and functional polyimides (PIs). They possess high thermal stability, good solubility, and easy processability for membrane fabrication; the resulting membranes exhibit good permeability owing to the intrinsic microporosity introduced by the highly contorted PIM segments as well as high CO 2/CH 4 selectivity that arises from the hydroxyl groups. The membranes show CO 2/CH 4 selectivities of >20 when tested with a 1:1 CO 2/CH 4 mixture for feed pressures up to 50 bar. In addition, the incorporation of hydroxyl groups and microporosity in the polymers enhances their affinity to water, leading to remarkable water sorption capacities of up to 22 wt % at 35 °C and 95% relative humidity. © 2012 American Chemical Society.

Bifunctionalized Intrinsically Microporous Polyimides with Simultaneously Enhanced Gas Permeability and Selectivity

KAUST Repository

Ma, Xiaohua

2016-03-29

Two novel intrinsically microporous copolyimides synthesized by condensation reaction of 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA), 3,3,3′,3′-tetramethyl-1,1′-spirobisindane-5,5′-diamino-6,6′-diol, and 3,5-diaminobenzoic acid with diamine ratios of 80/20 (Co-80/20) and 50/50 (Co-50/50) are reported. Unexpectedly, the Co-80/20 not only demonstrates higher microporosity (300 m2 g−1) than the PIM-6FDA-OH homopolymer (190 m2 g−1) but also exhibits simultaneously enhanced CO2 permeability (from 119 to 171 Barrer) and CO2/CH4 selectivity (from 35 to 41) after thermal annealing at 250 °C. This higher permeability originates from enhanced diffusivity (D CO2) and the higher selectivity results from its increased diffusion selectivity (D CO2/D CH4). After crosslinking at 300 °C, the Co-80/20 exhibits an even higher CO2 permeability (261 Barrer) and almost unchanged CO2/CH4 selectivity.

Biodegradation of Methylene Blue Dye by Sequential Treatment Using Anaerobic Hybrid Reactor and Submerged Aerobic Fixed Film Bioreactor

Science.gov (United States)

Farooqi, Izharul H.; Basheer, Farrukh; Tiwari, Pradeepika

2017-12-01

Laboratory scale experiments were carried out to access the feasibility of sequential anaerobic/aerobic biological treatment for the biodegradation of Methylene Blue (MB) dye. Anaerobic studies were performed using anaerobic hybrid reactor (consisting of UASB and Anaerobic filter) whereas submerged aerobic fixed film reactor was used as aerobic reactor. Degradation of MB dye was attempted using neutralized acetic acid (1000 mg/L) as co-substrate. MB dye concentration was stepwise increased from 10 to 70 mg/L after reaching steady state in each dye concentration. Such a gradual increase in the dye concentration helps in the proper acclimatization of the sludge to dyes thereby avoiding the possible inhibitory effects to biological activities at high dye concentrations. The overall treatment efficiency of MB through sequential anaerobic-aerobic reactor operation was 90% at maximum attempted dye concentration of 70 mg/L. The effluent from anaerobic reactor was analysed for intermediate biodegradation products through HPLC. It was observed that catechol, quinone, amino pyrine, 1,4 diamino benzene were present. However they were absent in final effluent.

MAPLE prepared heterostructures with oligoazomethine: Fullerene derivative mixed layer for photovoltaic applications

Science.gov (United States)

Stanculescu, A.; Rasoga, O.; Socol, M.; Vacareanu, L.; Grigoras, M.; Socol, G.; Stanculescu, F.; Breazu, C.; Matei, E.; Preda, N.; Girtan, M.

2017-09-01

Mixed layers of azomethine oligomers containing 2,5-diamino-3,4-dicyanothiophene as central unit and triphenylamine (LV5) or carbazol (LV4) at both ends as donor and fullerene derivative, [6,6]-phenyl-C61 butyric acid butyl ester ([C60]PCB-C4) as acceptor, have been prepared by Matrix Assisted Pulsed Laser Evaporation (MAPLE) on glass/ITO and Si substrates. The effect of weight ratio between donor and acceptor (1:1; 1:2) and solvent type (chloroform, dimethylsulphoxide) on the optical (UV-vis transmission/absorption, photoluminescence) and morphological properties of LV4 (LV5): [C60]PCB-C4 mixed layers has been evidenced. Dark and under illumination I-V characteristics of the heterostructures realized with these mixed layers sandwiched between ITO and Al electrodes have revealed a solar cell behavior for the heterostructures prepared with both LV4 and LV5 using chloroform as matrix solvent. The solar cell structure realized with oligomer LV5, glass/ITO/LV5: [C60]PCB-C4 (1:1) has shown the best parameters.

Characterization of Safranine O based thin-film sandwich devices by analysing their electrical and photoelectrical behaviour

Energy Technology Data Exchange (ETDEWEB)

Sharma, G.D. [Jodhpur Univ. (India). Dept. of Physics; Roy, M.S. [Camouflage Division, Defence Laboratory, Jodhpur, Rajastan (India); Gupta, S.K. [Jodhpur Univ. (India). Dept. of Physics

1997-04-30

Safranine O (SAF), chemically known as 3,7-diamino-2,8-dimethyl-5-phenyl-phenazinium chloride, was employed in the form of thin film for the fabrication of In/SAF/ITO and Al/SAF/ITO (ITO is indium-tin oxide) sandwich devices. In these devices, at low voltages, the dark current in forward bias condition corresponds to a positive voltage at ITO, which varies exponentially with applied voltage. The square law dependence at higher voltage region indicates that conduction is limited by a discrete trapping level above the conduction band edge. The analysis of the 1/C{sup 2} versus V plots, for low frequencies, reveals that the SAF behaves as a semiconductor. At higher frequencies, the devices exhibit voltage-independent capacitances, which is explained in terms of the extremely slow kinetics of space charges. The photogeneration process in these devices is explained in terms of the exciton dissociation into free carriers at the Schottky barrier (Al/SAF and In/SAF interfaces). Various electrical and photovoltaic parameters are calculated and discussed in detail. (orig.)

Improving the Conductivity of Sulfonated Polyimides as Proton Exchange Membranes by Doping of a Protic Ionic Liquid

Directory of Open Access Journals (Sweden)

Bor-Kuan Chen

2014-10-01

Full Text Available Proton exchange membranes (PEMs are a key component of a proton exchange membrane fuel cell. Sulfonated polyimides (SPIs were doped by protic ionic liquid (PIL to prepare composite PEMs with substantially improved conductivity. SPIs were synthesized from diamine, 2,2-bis[4-(4-amino-phenoxyphenyl]propane (BAPP, sulfonated diamine, 4,4'-diamino diphenyl ether-2,2'-disulfonic acid (ODADS and aromatic anhydride. BAPP improved the mechanical and thermal properties of SPIs, while ODADS enhanced conductivity. A PIL, 1-vinylimidazolium trifluoromethane-sulfonate ([VIm][OTf], was utilized. [VIm][OTf] offered better conductivity, which can be attributed to its vinyl chemical structure attached to an imidazolium ring that contributed to ionomer-PIL interactions. We prepared sulfonated polyimide/ionic liquid (SPI/IL composite PEMs using 50 wt% [VIm][OTf] with a conductivity of 7.17 mS/cm at 100 °C, and in an anhydrous condition, 3,3',4,4'-diphenyl sulfone tetracarboxylic dianhydride (DSDA was used in the synthesis of SPIs, leading to several hundred-times improvement in conductivity compared to pristine SPIs.

Synthesis and spectroscopic studies of biologically active tetraazamacrocyclic complexes of Mn(II, Co(II, Ni(II, Pd(II and Pt(II

Directory of Open Access Journals (Sweden)

Monika Tyagi

2014-01-01

Full Text Available Complexes of Mn(II, Co(II, Ni(II, Pd(II and Pt(II were synthesized with the macrocyclic ligand, i.e., 2,3,9,10-tetraketo-1,4,8,11-tetraazacycoletradecane. The ligand was prepared by the [2 + 2] condensation of diethyloxalate and 1,3-diamino propane and characterized by elemental analysis, mass, IR and 1H NMR spectral studies. All the complexes were characterized by elemental analysis, molar conductance, magnetic susceptibility measurements, IR, electronic and electron paramagnetic resonance spectral studies. The molar conductance measurements of Mn(II, Co(II and Ni(II complexes in DMF correspond to non electrolyte nature, whereas Pd(II and Pt(II complexes are 1:2 electrolyte. On the basis of spectral studies an octahedral geometry has been assigned for Mn(II, Co(II and Ni(II complexes, whereas square planar geometry assigned for Pd(II and Pt(II. In vitro the ligand and its metal complexes were evaluated against plant pathogenic fungi (Fusarium odum, Aspergillus niger and Rhizoctonia bataticola and some compounds found to be more active as commercially available fungicide like Chlorothalonil.

The nanoscale phase distinguishing of PCL-PB-PCL blended in epoxy resin by tapping mode atomic force microscopy

Science.gov (United States)

Li, Huiqin; Sun, Limin; Shen, Guangxia; Liang, Qi

2012-02-01

In this work, we investigated the bulk phase distinguishing of the poly(ɛ-caprolactone)-polybutadiene-poly(ɛ-caprolactone) (PCL-PB-PCL) triblock copolymer blended in epoxy resin by tapping mode atomic force microscopy (TM-AFM). We found that at a set-point amplitude ratio ( r sp) less than or equal to 0.85, a clear phase contrast could be obtained using a probe with a force constant of 40 N/m. When r sp was decreased to 0.1 or less, the measured size of the PB-rich domain relatively shrank; however, the height images of the PB-rich domain would take reverse (translating from the original light to dark) at r sp = 0.85. Force-probe measurements were carried out on the phase-separated regions by TM-AFM. According to the phase shift angle vs. r sp curve, it could be concluded that the different force exerting on the epoxy matrix or on the PB-rich domain might result in the height and phase image reversion. Furthermore, the indentation depth vs. r sp plot showed that with large tapping force (lower r sp), the indentation depth for the PB-rich domain was nearly identical for the epoxy resin matrix.

Hybrid organic-inorganic coatings based on alkoxy-terminated macromonomers

Energy Technology Data Exchange (ETDEWEB)

Kaddami, H. [Laboratoire des Materiaux Macromoleculaires---URA CNRS 507, Institut National des Sciences Appliquees de Lyon---Bat 403, 69621 Villeurbanne (France); Cuney, S. [Laboratoire des Materiaux Macromoleculaires---URA CNRS 507, Institut National des Sciences Appliquees de Lyon---Bat 403, 69621 Villeurbanne (France)]|[BSN Emballage-Centre de Recherche de Saint-Romain-en-Gier, 69700 Givors Cedex (France); Pascault, J.P. [Laboratoire des Materiaux Macromoleculaires---URA CNRS 507, Institut National des Sciences Appliquees de Lyon-Bat 403, 69621 Villeurbanne (France); Gerard, J.F. [Laboratoire des Materiaux Macromoleculaires---URA CNRS 507, Institut National des Sciences Appliquees de Lyon-Bat 403, 69621 Villeurbanne (France)

1996-01-01

From the use of alkoxysilane-terminated macromonomers based on hydrogenated polybutadiene and polycaprolactone oligomers and by using the polyurethane chemistry, hybrid organic{emdash}inorganic materials are prepared. These ones are two-phases systems in which the continuous phase is organic reinforced by silicon rich dispersed particles. These nanosized dispersed particles are formed {ital in} {ital situ} during the hydrolysis and condensation of the sol-gel process according to the phase separation process occurring between the organic and inorganic phases. The gelation process and the final morphologies were found to be very dependent on the acid(catalyst)-to-silicon ratio, on the molar mass of the oligomers, and on the solubility parameter of the soft segment. In fact, during the synthesis, there is a competition between the gelation and the phase separation process which could be perturbated by the vitrification of the silicon-rich clusters. The final morphologies observed by TEM and SAXS are discussed on the basis of the microstructural model proposed by Wilkes and Huang. Such hybrid organic-inorganic materials are applied as coatings on glass float plates tested in a bi-axial mode. The reinforcement is discussed as a function of the morphology of the coatings. {copyright} {ital 1996 American Institute of Physics.}

A six degree-of-freedom thrust sensor for a labscale hybrid rocket

International Nuclear Information System (INIS)

Wright, Ann M; Born, Traig; Strickland, Ryan; Wright, Andrew B

2013-01-01

A six degree-of-freedom thrust sensor was designed, constructed, calibrated, and tested using the labscale hybrid rocket at the University of Arkansas at Little Rock. The system consisted of six independent legs: one parallel to the axis of symmetry of the rocket for main thrust measurement, two vertical legs near the nozzle end of the rocket, one vertical leg near the oxygen input end of the rocket, and two separated horizontal legs near the nozzle end. Each leg was composed of a rotational bearing, a load cell, and a universal joint above and below the load cell. The leg was designed to create point contact along only one direction and minimize the non-axial forces applied to the load cell. With this system, force in each direction and moments for roll, pitch, and yaw can be measured. The system was calibrated and tested using a labscale hybrid rocket using gaseous oxygen and hydroxyl-terminated polybutadiene solid fuel. The thrust stand proved to be stable during calibration tests. Thrust force vector components and roll, pitch, and yaw moments were calculated for test firings with an oxygen mass flow rate range of 0.0174–0.0348 kg s −1 . (paper)

Nitrous Oxide/Paraffin Hybrid Rocket Engines

Science.gov (United States)

Zubrin, Robert; Snyder, Gary

2010-01-01

Nitrous oxide/paraffin (N2OP) hybrid rocket engines have been invented as alternatives to other rocket engines especially those that burn granular, rubbery solid fuels consisting largely of hydroxyl- terminated polybutadiene (HTPB). Originally intended for use in launching spacecraft, these engines would also be suitable for terrestrial use in rocket-assisted takeoff of small airplanes. The main novel features of these engines are (1) the use of reinforced paraffin as the fuel and (2) the use of nitrous oxide as the oxidizer. Hybrid (solid-fuel/fluid-oxidizer) rocket engines offer advantages of safety and simplicity over fluid-bipropellant (fluid-fuel/fluid-oxidizer) rocket en - gines, but the thrusts of HTPB-based hybrid rocket engines are limited by the low regression rates of the fuel grains. Paraffin used as a solid fuel has a regression rate about 4 times that of HTPB, but pure paraffin fuel grains soften when heated; hence, paraffin fuel grains can, potentially, slump during firing. In a hybrid engine of the present type, the paraffin is molded into a 3-volume-percent graphite sponge or similar carbon matrix, which supports the paraffin against slumping during firing. In addition, because the carbon matrix material burns along with the paraffin, engine performance is not appreciably degraded by use of the matrix.

Study on Thermal Degradation Characteristics and Regression Rate Measurement of Paraffin-Based Fuel

Directory of Open Access Journals (Sweden)

Songqi Hu

2015-09-01

Full Text Available Paraffin fuel has been found to have a regression rate that is higher than conventional HTPB (hydroxyl-terminated polybutadiene fuel and, thus, presents itself as an ideal energy source for a hybrid rocket engine. The energy characteristics of paraffin-based fuel and HTPB fuel have been calculated by the method of minimum free energy. The thermal degradation characteristics were measured for paraffin, pretreated paraffin, HTPB and paraffin-based fuel in different working conditions by the using differential scanning calorimetry (DSC and a thermogravimetric analyzer (TGA. The regression rates of paraffin-based fuel and HTPB fuel were tested by a rectangular solid-gas hybrid engine. The research findings showed that: the specific impulse of paraffin-based fuel is almost the same as that of HTPB fuel; the decomposition temperature of pretreated paraffin is higher than that of the unprocessed paraffin, but lower than that of HTPB; with the increase of paraffin, the initial reaction exothermic peak of paraffin-based fuel is reached in advance, and the initial reaction heat release also increases; the regression rate of paraffin-based fuel is higher than the common HTPB fuel under the same conditions; with the increase of oxidizer mass flow rate, the regression rate of solid fuel increases accordingly for the same fuel formulation.

Advanced oxidation technologies H{sub 2}O{sub 2}/UV evaluation in the treatment of effluent containing VCH (Vinylcyclohexene); Avaliacao do processo oxidativo avancado H{sub 2}O{sub 2}/UV no tratamento de efluente contendo VCH (Vinilciclohexeno)

Energy Technology Data Exchange (ETDEWEB)

Lenise, V.F.G.; Dezotti, M. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Programa de Engenharia Quimica; Aquino Neto, F.R. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Inst. de Quimica

2004-07-01

The study of vinylcyclohexene (VCH) degradation by the advanced oxidation technology H{sub 2}O{sub 2} /UV was researched in a pilot plant containing two Germetec, PFR reactors, with 0.7 L of useful volume. VCH is a persistent organic compound generated by thermal dimerization of 1,3-butadiene. One of the reactors had a warming/colding jacket and a low-pressure mercury vapor lamp, germicidal, of 25 W and the another had a medium-pressure mercury vapor lamp of 1.7 KW. Synthetic effluents containing VCH, VCH and ethanol and real hydroxyl terminated polybutadiene (HTPB) effluent were researched under different temperature and pH conditions. The aqueous effluent generated in HTPB plant was composed by 10-100 mg/L of VCH, others organic compounds like ethanol, butadiene and polymer, acidic pH, residual peroxide and a mean content of soluble organic carbon of 25000 mg/L. After 30 minutes of H{sub 2}O{sub 2}/UV treatment with a germicidal lamp , VCH was completely degradated while in the reactor with a medium pressure lamp after 5 minutes the complete VCH degradation happened. The degradation of others organic compounds in the effluent was observed with soluble organic carbon content reduction about 80%. The Kinetics of VCH degradation was monitored by GC/MS. (author)

Nanostructured poly(styrene-b-butadiene-b-styrene) (SBS) membranes for the separation of nitrogen from natural gas

Energy Technology Data Exchange (ETDEWEB)

Buonomenna, Maria Giovanna; Golemme, Giovanni [Department of Chemical Engineering and Materials, University of Calabria, and Consorzio INSTM, Rende (Italy); Tone, Caterina Maria; De Santo, Maria Penelope; Ciuchi, Federica [IPCF-CNR UOS Cosenza, c/o Physics Department, University of Calabria, Rende (Italy); Perrotta, Enrico [Department of Ecology, University of Calabria, Rende (Italy)

2012-04-24

The preparation and characterization of new, tailor-made polymeric membranes using poly(styrene-b-butadiene-b-styrene) (SBS) triblock copolymers for gas separation are reported. Structural differences in the copolymer membranes, obtained by manipulation of the self-assembly of the block copolymers in solution, are characterized using atomic force microscopy, transmission electron microscopy, and the transport properties of three gases (CO{sub 2}, N{sub 2}, and CH{sub 4}). The CH{sub 4}/N{sub 2} ideal selectivity of 7.2, the highest value ever reported for block copolymers, with CH{sub 4} permeability of 41 Barrer, is obtained with a membrane containing the higher amount of polybutadiene (79 wt%) and characterized by a hexagonal array of columnar polystyrene cylinders normal to the membrane surface. Membranes with such a high separation factor are able to ease the exploitation of natural gas with high N{sub 2} content. The CO{sub 2}/N{sub 2} ideal selectivity of 50, coupled with a CO{sub 2} permeability of 289 Barrer, makes SBS a good candidate for the preparation of membranes for the post-combustion capture of carbon dioxide. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

In vitro studies on the effect of physical cross-linking on the biological performance of aliphatic poly(urethane urea) for blood contact applications.

Science.gov (United States)

Thomas, V; Kumari, T V; Jayabalan, M

2001-01-01

The effect of physical cross-linking in candidate cycloaliphatic and hydrophobic poly(urethane urea) (4,4'-methylenebis(cyclohexylisocyanate), H(12)MDI/hydroxy-terminated polybutadiene, HTPBD/hexamethylenediamine, HDA) and poly(ether urethane urea)s (H(12)MDI/HTPBD-PTMG/HDA) on the in vitro calcification and blood-material interaction was studied. All the candidate poly(urethane urea)s and poly(ether urethane urea)s elicit acceptable hemolytic activity, cytocompatibility, calcification, and blood compatibility in vitro. The studies on blood-material interaction reveal that the present poly(urethane urea)s are superior to polystyrene microtiter plates which were used for the studies on blood-material interaction. The present investigation reveals the influence of physical cross-link density on biological interaction differently with poly(urethane urea) and poly(ether urethane urea)s. The higher the physical cross-link density in the poly(urethane urea)s, the higher the calcification and consumption of WBC in whole blood. On the other hand, the higher the physical cross-link density in the poly(ether urethane urea)s, the lesser the calcification and consumption of WBC in whole blood. However a reverse of the above trend has been observed with the platelet consumption in the poly(urethane urea)s and poly(ether urethane urea)s.

Unsaturated macrocyclic dihydroxamic acid siderophores produced by Shewanella putrefaciens using precursor-directed biosynthesis.

Science.gov (United States)

Soe, Cho Z; Codd, Rachel

2014-04-18

To acquire iron essential for growth, the bacterium Shewanella putrefaciens produces the macrocyclic dihydroxamic acid putrebactin (pbH2; [M + H(+)](+), m/zcalc 373.2) as its native siderophore. The assembly of pbH2 requires endogenous 1,4-diaminobutane (DB), which is produced from the ornithine decarboxylase (ODC)-catalyzed decarboxylation of l-ornithine. In this work, levels of endogenous DB were attenuated in S. putrefaciens cultures by augmenting the medium with the ODC inhibitor 1,4-diamino-2-butanone (DBO). The presence in the medium of DBO together with alternative exogenous non-native diamine substrates, (15)N2-1,4-diaminobutane ((15)N2-DB) or 1,4-diamino-2(E)-butene (E-DBE), resulted in the respective biosynthesis of (15)N-labeled pbH2 ((15)N4-pbH2; [M + H(+)](+), m/zcalc 377.2, m/zobs 377.2) or the unsaturated pbH2 variant, named here: E,E-putrebactene (E,E-pbeH2; [M + H(+)](+), m/zcalc 369.2, m/zobs 369.2). In the latter system, remaining endogenous DB resulted in the parallel biosynthesis of the monounsaturated DB-E-DBE hybrid, E-putrebactene (E-pbxH2; [M + H(+)](+), m/zcalc 371.2, m/zobs 371.2). These are the first identified unsaturated macrocyclic dihydroxamic acid siderophores. LC-MS measurements showed 1:1 complexes formed between Fe(III) and pbH2 ([Fe(pb)](+); [M](+), m/zcalc 426.1, m/zobs 426.2), (15)N4-pbH2 ([Fe((15)N4-pb)](+); [M](+), m/zcalc 430.1, m/zobs 430.1), E,E-pbeH2 ([Fe(E,E-pbe)](+); [M](+), m/zcalc 422.1, m/zobs 422.0), or E-pbxH2 ([Fe(E-pbx)](+); [M](+), m/zcalc 424.1, m/zobs 424.2). The order of the gain in siderophore-mediated Fe(III) solubility, as defined by the difference in retention time between the free ligand and the Fe(III)-loaded complex, was pbH2 (ΔtR = 8.77 min) > E-pbxH2 (ΔtR = 6.95 min) > E,E-pbeH2 (ΔtR = 6.16 min), which suggests one possible reason why nature has selected for saturated rather than unsaturated siderophores as Fe(III) solubilization agents. The potential to conduct multiple types of ex situ chemical

Synthesis, structural characterization, thermal analysis, and DFT calculation of a novel zinc (II)-trifluoro-β-diketonate 3D supramolecular nano organic-inorganic compound with 1,3,5-triazine derivative

Energy Technology Data Exchange (ETDEWEB)

Mirtamizdoust, Babak, E-mail: babakm.tamizdoust@gmail.com [Department of Chemistry, Yasouj University, Yasouj, 75918-74831 (Iran, Islamic Republic of); Department of Chemistry, Faculty of Science, University of Qom, PO Box 37185-359, Qom, Islamic Republic of Iran (Iran, Islamic Republic of); Ghaedi, Mehrorang [Department of Chemistry, Yasouj University, Yasouj, 75918-74831 (Iran, Islamic Republic of); Hanifehpour, Younes, E-mail: y_hanifehpour@yu.ac.kr [School of Mechanical Engineering, WCU Nano Research Center, Yeungnam University, Gyongsan, 712-749 (Korea, Republic of); Mague, Joel T. [Department of Chemistry, Tulane University, New Orleans (United States); Joo, Sang Woo, E-mail: swjoo1@gmail.com [School of Mechanical Engineering, WCU Nano Research Center, Yeungnam University, Gyongsan, 712-749 (Korea, Republic of)

2016-10-01

A sonochemical method was used to synthesize a novel nano-structure of a zinc(II) organic-inorganic compound [Zn(dapt){sub 2}(ttfa){sub 2}] (1) [dapt = 2,4-diamino-6-phenyl-1,3,5-triazine and ttfa = 2-thenoyltrifluoroacetonate]. The new nanostructure was characterized by scanning electron microscopy, X-ray powder diffraction, elemental analysis, and thermal analysis. The single-crystal X-ray structure shows that 1 is a discrete coordination compound. Strong intra- and intermolecular hydrogen bonds are observed in the structure with the latter forming chains of molecules running parallel to (110). The chains are further extended into a three-dimensional supramolecular structure by intermolecular C−F⋯π interactions between trifluoromethyl and triazine moieties. The coordination number of the zinc(II) ion is six (ZnN{sub 2}O{sub 4}), and the coordination sphere is tetragonally elongated octahedral. The structure of the title complex was optimized by DFT calculations. - Highlights: • A new zinc(II) 3D coordination supramolecular compound was synthesized. • Ultrasound synthesis of nano coordination compound have been reported. • The X-ray crystal structure of the compound is reported.

Polyimide-polyether mixed conductors as switchable materials for electrochromic devices

Energy Technology Data Exchange (ETDEWEB)

Michot, C; Baril, D; Armand, M [Laboratoire d` Ionique et d` Electrochimie du Solide, ENSEEG, Institut National Polytechnique de Grenoble, Saint-Martin d` Heres (France)

1995-12-01

A new family of redox-active polymers have been obtained by polycondensation of {alpha},{omega}-diamino oligopolyethers with various aromatic tetracarboxylic acid anhydrides. The polyether blocks retain the usual cation co-ordination ability leading to solid-state ionic conduction while the relatively large electron affinity of the bis-imide moieties formed in the block polymers allows the reversible formation of stable radical anions ({sup -} and {sup 2-}) in the range 2-2.6 V vs. Li. Either slow-scan or microelectrode voltammetry indicate that the totality of the redox centres in such materials are readily accessible for all polyether spacer lengths tested (6-22 ether fragments), suggesting both a fast electron-exchange mechanism between anion radicals and a tendency for self assembly (stacking) of the planar aromatic groups. When increasing the number of atoms in the aromatic ring, the peak separation became smaller (benzene>naphthalene>perylene), resulting ultimately in simultaneous 2-electrons injection. These materials, due to the high coloration efficiency of the reduced state and their ready processability in thin films are excellent candidate for the realisation of laminated solid-state electrochromic devices

Dynamic investigation of DNA bending and wrapping by type II topoisomerases

Science.gov (United States)

Shao, Qing; Finzi, Laura; Dunlap, David

2009-11-01

Type II topoisomerases catalyze DNA decatenation and unwinding which is crucial for cell division, and therefore type II topoisomerases are some of the main targets of anti-cancer drugs. A recent crystal structure shows that, during the catalytic cycle, a yeast type II topoimerase can bend a 10 base pair DNA segment by up to 150 degrees. Bacterial gyrase, another type II topoisomerase, can wrap DNA into a tight 180 degree turn. Bending a stiff polymer like DNA requires considerable energy and could represent the rate limiting step in the catalytic (topological) cycle. Using modified deoxyribonucleotides in PCR reactions, stiffer DNA fragments have been produced and used as substrates for topoisomerase II-mediated relaxation of plectonemes introduced in single molecules using magnetic tweezers. The wrapping ability of gyrase decreases for diamino-purine-substituted DNA in which every base pair has three hydrogen-bonds. The overall rate of relaxation of plectonemes by recombinant human topoisomerase II alpha also decreases. These results reveal the dynamic properties of DNA bending and wrapping by type II topisomerases and suggest that A:T base pair melting is a rate determining step for bending and wrapping.

Emergência da múltipla resistência a antimicrobianos em Vibrio cholerae isolados de pacientes com gastroenterite no Ceará, Brasil

Directory of Open Access Journals (Sweden)

Hofer Ernesto

1999-01-01

Full Text Available Das 7058 amostras de Vibrio cholerae isoladas de pacientes com suspeita de síndrome coleriforme, no período de 1991 a 1993, no Estado do Ceará, foram detectadas duas com as características de múltipla resistência aos antimicrobianos (tetraciclina, ampicilina, eritromicina, sulfametoxazol-trimetoprima e ao composto vibriostático O/129 (2,4-diamino-6,7-diisopropilpteridina. Do ponto de vista bacteriológico uma amostra foi identificada como V. cholerae sorogrupo O:1, biotipo El Tor e sorovar Inaba e a outra, caracterizada como V. cholerae sorogrupo O:22, classificada bioquimicamente no tipo II de Heiberg. Foi demonstrado que apenas na amostra do sorogrupo O:1, a multirresistência era codificada por um plasmídio, transferível por conjugação para Escherichia coli K12 e amostras sensíveis de V. cholerae O1 e não O1, numa freqüência entre 8x10-2 a 5x10-6. O plasmídio responsável pela multirresistência apresentou um peso molecular de 147 Kb, compatível com as descrições em outras partes do mundo.

Isolation and characterization of mesophilic, oxalate-degrading Streptomyces from plant rhizosphere and forest soils

Science.gov (United States)

Sahin, Nurettin

2004-10-01

The present work was aimed at the isolation of additional new pure cultures of oxalate-degrading Streptomyces and its preliminary characterization for further work in the field of oxalate metabolism and taxonomic studies. Mesophilic, oxalate-degrading Streptomyces were enriched and isolated from plant rhizosphere and forest soil samples. Strains were examined for cultural, morphological (spore chain morphology, spore mass colour, diffusible and melanin pigment production), physiological (antibiosis, growth in the presence of inhibitory compounds, assimilation of organic acids and enzyme substrates) and chemotaxonomic characters (cellular lipid components and diagnostic cell-wall diamino acid). The taxonomic data obtained were analysed by using the simple matching (SSM) and Jaccard (SJ) coefficients, clustering was achieved using the UPGMA algorithm. All strains were able to utilize sodium-, potassium-, calcium- and ammonium-oxalate salts. Based on the results of numerical taxonomy, isolates were grouped into five cluster groups with a ≥70% SSM similarity level. Streptomyces rochei was the most common of the cluster groups, with a Willcox probability of P>0.8. Streptomyces antibioticus, S. anulatus, S. fulvissimus, S. halstedii and S. violaceusniger are newly reported as oxalate-utilizing Streptomyces.

Solving the problem of building models of crosslinked polymers: an example focussing on validation of the properties of crosslinked epoxy resins.

Directory of Open Access Journals (Sweden)

Stephen A Hall

Full Text Available The construction of molecular models of crosslinked polymers is an area of some difficulty and considerable interest. We report here a new method of constructing these models and validate the method by modelling three epoxy systems based on the epoxy monomers bisphenol F diglycidyl ether (BFDGE and triglycidyl-p-amino phenol (TGAP with the curing agent diamino diphenyl sulphone (DDS. The main emphasis of the work concerns the improvement of the techniques for the molecular simulation of these epoxies and specific attention is paid towards model construction techniques, including automated model building and prediction of glass transition temperatures (T(g. Typical models comprise some 4200-4600 atoms (ca. 120-130 monomers. In a parallel empirical study, these systems have been cast, cured and analysed by dynamic mechanical thermal analysis (DMTA to measure T(g. Results for the three epoxy systems yield good agreement with experimental T(g ranges of 200-220°C, 270-285°C and 285-290°C with corresponding simulated ranges of 210-230°C, 250-300°C, and 250-300°C respectively.

Binding of phenazinium dye safranin T to polyriboadenylic acid: spectroscopic and thermodynamic study.

Directory of Open Access Journals (Sweden)

Ankur Bikash Pradhan

Full Text Available Here, we report results from experiments designed to explore the association of the phenazinium dye safranin T (ST, 3,7-diamino-2,8-dimethyl-5-phenylphenazinium chloride with single and double stranded form of polyriboadenylic acid (hereafter poly-A using several spectroscopic techniques. We demonstrate that the dye binds to single stranded polyriboadenylic acid (hereafter ss poly-A with high affinity while it does not interact at all with the double stranded (ds form of the polynucleotide. Fluorescence and absorption spectral studies reveal the molecular aspects of binding of ST to single stranded form of the polynucleotide. This observation is also supported by the circular dichroism study. Thermodynamic data obtained from temperature dependence of binding constant reveals that association is driven by negative enthalpy change and opposed by negative entropy change. Ferrocyanide quenching studies have shown intercalative binding of ST to ss poly-A. Experiments on viscosity measurements confirm the binding mode of the dye to be intercalative. The effect of [Na⁺] ion concentration on the binding process suggests the role of electrostatic forces in the complexation. Present studies reveal the utility of the dye in probing nucleic acid structure.

Influence of different amino substituents in position 1 and 4 on spectroscopic and acid base properties of 9,10-anthraquinone moiety.

Science.gov (United States)

Wcisło, Anna; Niedziałkowski, Paweł; Wnuk, Elżbieta; Zarzeczańska, Dorota; Ossowski, Tadeusz

2013-05-01

A series of novel 1-amino and 1,4-diamino-9,10-anthraquinones, substituted with different alkyl groups, were synthesized as the result of alkylation with amino substituents. All the obtained aminoanthraquinone derivatives were characterized by NMR, IR spectroscopy and mass spectrometry. The spectroscopic properties of these compounds were determined by using UV-Vis spectroscopy in acetonitrile, and in the mixture of acetonitrile and methanol at different pH ranges. The effects of various substituents present in the newly developed anthraquinone derivatives and their ability to form hydrogen bonds between the carbonyl oxygen atom of anthraquinone moiety and nitrogen atom of N-H group in 1-aminoanthraquinone (1-AAQ) and 1,4-diaminoanthraquinone (1,4-DAAQ) were studied. Additionally, the effects of hydrogen bond formation between O-H group in hydroxyethylamino substituent and the carbonyl oxygen atom of anthraquinone were investigated. The spectroscopic behavior of the studied derivatives strongly depended on the solvent-solute interactions and the nature of solvent. The values of pKa for the new anthraquinones were determined by the combined potentiometric and spectrophotometric titration methods. Copyright © 2013 Elsevier B.V. All rights reserved.

Theoretical study on the mechanism of the reaction of FOX-7 with OH and NO2 radicals: bimolecular reactions with low barrier during the decomposition of FOX-7

Science.gov (United States)

Zhang, Ji-Dong; Zhang, Li-Li

2017-12-01

The decomposition of 1,1-diamino-2,2-dinitroethene (FOX-7) attracts great interests, while the studies on bimolecular reactions during the decomposition of FOX-7 are scarce. This study for the first time investigated the bimolecular reactions of OH and NO2 radicals, which are pyrolysis products of ammonium perchlorate (an efficient oxidant usually used in solid propellant), with FOX-7 by computational chemistry methods. The molecular geometries and energies were calculated using the (U)B3LYP/6-31++G(d,p) method. The rate constants of the reactions were calculated by canonical variational transition state theory. We found three mechanisms (H-abstraction, OH addition to C and N atom) for the reaction of OH + FOX-7 and two mechanisms (O abstraction and H abstraction) for the reaction of NO2 + FOX-7. OH radical can abstract H atom or add to C atom of FOX-7 with barriers near to zero, which means OH radical can effectively degrade FOX-7. The O abstraction channel of the reaction of NO2 + FOX-7 results in the formation of NO3 radical, which has never been detected experimentally during the decomposition of FOX-7.

Synthesis and characterization of polyimide-epoxy hybrid films

International Nuclear Information System (INIS)

Butt, M.S.; Akhter, Z.; Siddiqi, H.M.

2011-01-01

Composites from polyimide and epoxy-amine were prepared aiming for enhancing its thermal and mechanical properties. Polyimide-epoxy-amine hybrid films were prepared by blending of polyimide and epoxy-amine in different ratios whereas, polyimide was prepared by reacting 1,2-di(p-aminophenyloxy)ethylene with 3,3/sub '/4,4/sub '/-benzophenone tetracarboxylic acid dianhydride. The blend systems with Araldite LY564 (1,4-butanediolediglycidyl ether) (BDDE) and Hardener HY2954 (3,3/sub '/-dimethyl-4,4/sub '/-diamino dicyclohexyl)methane (MACM) were investigated in term of thermal, mechanical and viscoelastic measurements. Thermal stability was determined using thermogravimetric analysis. The effect of the polyimide content on the glass transition temperature (Tg) and thermal stability was observed. Viscoelastic measurements showed that the glass transition temperature shifted with the increase of polyimide content. The composites showed higher thermal stability in comparison with neat epoxy-amine matrix for higher polyimide concentration. The effect of polyimide content on the mechanical properties was also investigated. The tensile measurements of the films showed that with the increase of polyimide content the tensile modulus of the films was increased. (author)

Efecto de la polietilenimina en la actividad catalítica de la peroxidasa de rábano (horseradish peroxidase inmovilizada en electrodos de oro modificados con monocapas autoensambladas de tioles (SAMs.

Directory of Open Access Journals (Sweden)

Pedro R. Matheus

2009-05-01

Full Text Available Effect of the Polyethyleneimine in the Activity Catalytic of the horseradish peroxidase Immobilized on Gold Electrodes Modified with a Self-assembled Monolayer of Thiols (SAMs. Studies were conducted bycyclic voltammetry (CV to investigate the effect of the polymer polyethyleneimine (PEI in the electrochemical reversibility of the mediator thionine and thus the catalytic activity of the enzyme horseradish peroxidase of recombinant HRP-NHis (horseradish peroxidase to the has been added to a chain of six histidine in the extreme N-terminal protein. This self produced monolayers of thiols (SAMS on gold electrodes, with chemical modifications obtained through successive stages in the solid phase of the electrode. The gold electrodes were modified with monolayer SAM-TOA-[ANTA/DADOO] -Co2+ [SAM: self-assembled monolayers of thiols, TOA: dithioctic acid, ANTA: nitrilotriacetic acid, DADOO: 1,8-diamino-3,6-dioxa octane]. The results showed that the presence of the polymer improves the electrochemical reversibility of the mediator to endure catalyticcurrents as high as those that are obtained with molar ratios ANTA:DADOO 10:1 in the absence of PEI, and improve the response voltammetric obtained.

Analytical method for the determination of atrazine and its dealkylated chlorotriazine metabolites in water using SPE sample preparation and GC-MSD analysis.

Science.gov (United States)

Huang, Sung-Ben; Stanton, Jeffrey S; Lin, Yi; Yokley, Robert A

2003-12-03

A method is reported for the determination of atrazine and its dealkylated chlorotriazine metabolites in ground, surface, and deionized water. Water samples are adjusted to pH 3-4 prior to loading onto two SPE cartridges in series: C-18 and C-18/cation exchange mixed-mode polymeric phases. The analytes are eluted from each of the two cartridges separately, and the pooled and concentrated fraction is analyzed using gas chromatography-mass selective detection in the selected ion monitoring mode. The lower limit of method validation is 0.10 micrograms/L (ppb) for 2-chloro-4-(ethylamino)-6-(isopropylamino)-s-triazine (atrazine), 2-amino-4-chloro-6-(isopropylamino)-s-triazine (G-30033, deethylatrazine), 2-amino-4-chloro-6-(ethylamino)-s-triazine (G-28279, deisopropylatrazine), and 2,4-diamino-6-chloro-s-triazine (G-28273, didealkyatrazine). The overall mean procedural recoveries (and standard deviations) are 96 (6.9), 96 (5.5), 95 (6.8), and 100% (10%) for atrazine, G-30033, G-28279, and G-28273, respectively (n = 49). The method validation study was conducted under U.S. EPA FIFRA Good Laboratory Practice Guidelines 40 CFR 160. The reported procedure accounts for residues of G-28273 in water.

Localisation of 3H-GABA in the rat olfactory bulb: An in vivo and in vitro autoradiographic study

International Nuclear Information System (INIS)

Jaffe, E.H.; Cuello, A.C.; Priestley, J.V.

1983-01-01

In an attempt to further clarify the localisation of GABAergic elements in the olfactory bulb we have performed, in vivo and in vitro, autoradiographic studies with 3 H-GABA (#betta#-amino butyric acid) and 3 H-DABA (L-2,4 diamino butyric acid). The results have shown a strong labelling with 3 H-GABA of the glial cells in all the layers of the olfactory bulb. A high concentration of grains was observed in the periglomerular region. The labelling in the external plexiform layer was uniformly distributed in the neuropile with the strongest activity at the level of the dendritic processes of the granule cells, leaving the mitral cell dendrites and cell bodies almost free of grains. 3 H-DABA showed a very similar pattern to 3 H-GABA. When olfactory bulb slices were preincubated with #betta#-alanine the labelling of the glial elements almost disappeared especially at the level of the olfactory nerve layer. The labelling pattern of the other layers of the bulb remained mostly unchanged. This supports the view that a population of periglomerular and granule cells are GABAergic and that #betta#-alanine competes with GABA uptake sites only in glial cells. (orig.)

Influence of structure of a crosslinked epoxy resin on its properties studied by positron annihilation and other methods

International Nuclear Information System (INIS)

Debowska, M.; Baranowski, A.; Jerie, K.; Rudzinska-Girulska, J.; Kurzeja, L.; Hennek, K.

1996-01-01

Positron annihilation has been applied to study samples of two crosslinked epoxy resins: diglycidyl ether of bisphenol A (Epikote 828) and polyglycidyl-ether of phenol-formaldehyde novolac (Epikote 155) cured with 4,4'-diamino-diphenylo-methane (MDA), phenol-formaldehyde novolac resin (Novolac Z) and bisphenol A (formaldehyde resin). Results of measurements of positron lifetime spectra were compared with the ones coming from DMTA, flexural strength testing and density measurements. The most important features of samples (glass transition temperature, storage modulus, flexural strength, crosslinking density and tan δ) proved to be correlated with the product Ι 3 x v-bar, proportional to the fractional free volume in samples. Values of v-bar have been estimated from the values of τ 3 , the longest lifetime in positron lifetime spectra. Ι 3 corresponds to the intensity of the longest-lived component in them. Distributions of free volume radii reconstructed in the basis of PAL measurements are given for all samples. The influences of structure of both cured resin and the curing agent on the properties of the crosslinked products is clearly seen from the presented results. (author)

Hydration, phase separation and nonlinear rheology of temperature-sensitive water-soluble polymers

Energy Technology Data Exchange (ETDEWEB)

Tanaka, Fumihiko; Koga, Tsuyoshi [Department of Polymer Chemistry, Graduate School of Engineering, Kyoto University, Kyoto 615-8510 (Japan); Kaneda, Isamu [Department of Food Science, Rakuno Gakuen University, Ebetsu, Hokkaido 069-8501 (Japan); Winnik, Francoise M, E-mail: ftanaka@phys.polym.kyoto-u.ac.jp [Department of Chemistry and Faculty of Pharmacy, University of Montreal, Montreal, H3C 3J7 (Canada)

2011-07-20

The collapse of a poly(N-isopropylacrylamide) (PNIPAM) chain upon heating and the phase diagrams of aqueous PNIPAM solutions with a very flat lower critical solution temperature (LCST) phase separation line are theoretically studied on the basis of cooperative dehydration (simultaneous dissociation of bound water molecules in a group of correlated sequence), and compared with the experimental observation of temperature-induced coil-globule transition by light scattering methods. The transition becomes sharper with the cooperativity parameter {sigma} of hydration. The reentrant coil-globule-coil transition and cononsolvency in a mixed solvent of water and methanol are also studied from the viewpoint of competitive hydrogen bonds between polymer-water and polymer-methanol. The downward shift of the cloud-point curves (LCST cononsolvency) with the mol fraction of methanol due to the competition is calculated and compared with the experimental data. Aqueous solutions of hydrophobically modified PNIPAM carrying short alkyl chains at both chain ends (telechelic PNIPAM) are theoretically and experimentally studied. The LCST of these solutions is found to shift downward along the sol-gel transition curve as a result of end-chain association (association-induced phase separation), and separate from the coil-globule transition line. Associated structures in the solution, such as flower micelles, mesoglobules, and higher fractal assembly, are studied by ultra small-angle neutron scattering with theoretical modeling of the scattering function. Dynamic-mechanical modulus, nonlinear stationary viscosity, and stress build-up in start-up shear flows of the associated networks are studied on the basis of the affine and non-affine transient network theory. The molecular conditions for thickening, strain hardening, and stress overshoot are found in terms of the nonlinear amplitude A of the chain tension and the tension-dissociation coupling constant g.

Structure and swelling behaviour of epoxy networks based on .alpha.,.omega.-diamino terminated poly(oxypropylene)-block-poly(oxyethylene)-block-poly(oxypropylene)

Czech Academy of Sciences Publication Activity Database

Krakovský, I.; Hanuš, J.; Pleštil, Josef; Baldrian, Josef; Sánchez, M. S.

2005-01-01

Roč. 46, č. 1 (2005), s. 109-119 ISSN 0032-3861 Institutional research plan: CEZ:AV0Z40500505 Keywords : epoxy network * microphase separation * swelling Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.849, year: 2005

catena-Poly[lead(II-[μ-2,4-diamino-6-(piperidin-1-ylpyrimidine N-oxide-κ2O:O]di-μ-iodido

Directory of Open Access Journals (Sweden)

Maryam Ranjbar

2009-07-01

Full Text Available The N-oxide O atom of the minoxidil unit in the 1/1 adduct with lead(II iodide, [PbI2(C9H15N5O]n, bridges two PbII atoms, as do each of the I atoms. The bridging interactions give rise to a linear chain motif that propagates along the a axis of the orthorhombic unit cell. The coordination sphere around the six-coordinate PbII atom is a distorted ψ-monocapped octahedron in which the stereochemically active lone pair caps one of the faces defined by the O and I atoms forming the longer Pb—O or Pb—I bonds. The PbII atom lies on a mirror plane; the mirror plane is perpendicular to the pyrimidine ring and it bisects the piperidine ring. The aromatic ring is disordered about the mirror plane with respect to the 1-nitrogen and 5-carbon atoms.

Radiative Ignition of fine-ammonium perchlorate composite propellants

Energy Technology Data Exchange (ETDEWEB)

Cain, Jeremy; Brewster, M. Quinn [Department of Mechanical Science and Industrial Engineering, University of Illinois, Urbana, IL 61801 (United States)

2006-08-15

Radiative ignition of quasi-homogeneous mixtures of ammonium perchlorate (AP) and hydroxyterminated polybutadiene (HTPB) binder has been investigated experimentally. Solid propellants consisting of fine AP (2 {mu}m) and HTPB binder ({proportional_to}76/24% by mass) were ignited by CO{sub 2} laser radiation. The lower boundary of a go/no-go ignition map (minimum ignition time vs. heat flux) was obtained. Opacity was varied by adding carbon black up to 1% by mass. Ignition times ranged from 0.78 s to 0.076 s for incident fluxes ranging from 60 W/cm{sup 2} to 400 W/cm{sup 2}. It was found that AP and HTPB are sufficiently strongly absorbing of 10.6 {mu}m CO{sub 2} laser radiation (absorption coefficient {approx}250 cm{sup -1}) so that the addition of carbon black in amounts typical of catalysts or opacitymodifying agents (up to 1%) would have only a small influence on radiative ignition times at 10.6 {mu}m. A simple theoretical analysis indicated that the ignition time-flux data are consistent with in-depth absorption effects. Furthermore, this analysis showed that the assumption of surface absorption is not appropriate, even for this relatively opaque system. For broadband visible/near-infrared radiation, such as from burning metal/oxide particle systems, the effects of in-depth absorption would probably be even stronger. (Abstract Copyright [2006], Wiley Periodicals, Inc.)

Fabrication of platinum nanoparticles in aqueous solution and solid phase using amphiphilic PB-b-PEO copolymer nanoreactors

International Nuclear Information System (INIS)

Hoda, Numan; Budama, Leyla; Çakır, Burçin Acar; Topel, Önder; Ozisik, Rahmi

2013-01-01

Graphical abstract: TEM image of Pt nanoparticles produced by reducing by NaBH 4 within PB-b-PEO micelles in aqueous media (scale bar 1 nm). - Highlights: • Pt nanoparticles were synthesized within amphiphilic diblock copolymer micelles. • The effects of reducing agents and precursor dose on Pt np size were investigated. • The effect on fabrication of Pt np by reducing in aqueous and solid phases was compared. • The size of nanoparticles was about 1.4 nm for all doses and reducing agents types. - Abstract: Fabrication of Pt nanoparticles using an amphiphilic copolymer template in aqueous solution was achieved via polybutadiene-block-polyethyleneoxide copolymer micelles, which acted as nanoreactors. In addition, Pt nanoparticles were synthesized using hydrogen gas as the reducing agent in solid state for the first time to compare against solution synthesis. The influences of loaded precursor salt amount to micelles and the type of reducing agent on the size of nanoparticles were investigated through transmission electron microscopy. It was found that increasing the ratio of precursor salt to copolymer and using different type of reducing agent, even in solid phase reduction, did not affect the nanoparticle size. The average size of Pt nanoparticles was estimated to be 1.4 ± 0.1 nm. The reason for getting same sized nanoparticles was discussed in the light of nucleation, growth process, stabilization and diffusion of nanoparticles within micelles

-Styrene)

KAUST Repository

Sutisna, Burhannudin

2017-10-04

Membranes are prepared by self-assembly and casting of 5 and 13 wt% poly(styrene-b-butadiene-b-styrene) (PS-b-PB-b-PS) copolymers solutions in different solvents, followed by immersion in water or ethanol. By controlling the solution-casting gap, porous films of 50 and 1 µm thickness are obtained. A gradient of increasing pore size is generated as the distance from the surface increased. An ordered porous surface layer with continuous nanochannels can be observed. Its formation is investigated, by using time-resolved grazing incident small angle X-ray scattering, electron microscopy, and rheology, suggesting a strong effect of the air-solution interface on the morphology formation. The thin PS-b-PB-b-PS ordered films are modified, by promoting the photolytic addition of thioglycolic acid to the polybutadiene groups, adding chemical functionality and specific transport characteristics on the preformed nanochannels, without sacrificing the membrane morphology. Photomodification increases fivefold the water permeance to around 2 L m(-2) h(-1) bar(-1) , compared to that of the unmodified one. A rejection of 74% is measured for methyl orange in water. The membranes fabrication with tailored nanochannels and chemical functionalities can be demonstrated using relatively lower cost block copolymers. Casting on porous polyacrylonitrile supports makes the membranes even more scalable and competitive in large scale.

In Situ Imaging during Compression of Plastic Bonded Explosives for Damage Modeling

Directory of Open Access Journals (Sweden)

Virginia W. Manner

2017-06-01

Full Text Available The microstructure of plastic bonded explosives (PBXs is known to influence behavior during mechanical deformation, but characterizing the microstructure can be challenging. For example, the explosive crystals and binder in formulations such as PBX 9501 do not have sufficient X-ray contrast to obtain three-dimensional data by in situ, absorption contrast imaging. To address this difficulty, we have formulated a series of PBXs using octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX crystals and low-density binder systems. The binders were hydroxyl-terminated polybutadiene (HTPB or glycidyl azide polymer (GAP cured with a commercial blend of acrylic monomers/oligomers. The binder density is approximately half of the HMX, allowing for excellent contrast using in situ X-ray computed tomography (CT imaging. The samples were imaged during unaxial compression using micro-scale CT in an interrupted in situ modality. The rigidity of the binder was observed to significantly influence fracture, crystal-binder delamination, and flow. Additionally, 2D slices from the segmented 3D images were meshed for finite element simulation of the mesoscale response. At low stiffness, the binder and crystal do not delaminate and the crystals move with the material flow; at high stiffness, marked delamination is noted between the crystals and the binder, leading to very different mechanical properties. Initial model results exhibit qualitatively similar delamination.