WorldWideScience

Sample records for devices working principle

  1. Phosphorescent Organic Light-Emitting Devices: Working Principle and Iridium Based Emitter Materials

    Directory of Open Access Journals (Sweden)

    Emil J. W. List

    2008-08-01

    Full Text Available Even though organic light-emitting device (OLED technology has evolved to a point where it is now an important competitor to liquid crystal displays (LCDs, further scientific efforts devoted to the design, engineering and fabrication of OLEDs are required for complete commercialization of this technology. Along these lines, the present work reviews the essentials of OLED technology putting special focus on the general working principle of single and multilayer OLEDs, fluorescent and phosphorescent emitter materials as well as transfer processes in host materials doped with phosphorescent dyes. Moreover, as a prototypical example of phosphorescent emitter materials, a brief discussion of homo- and heteroleptic iridium(III complexes is enclosed concentrating on their synthesis, photophysical properties and approaches for realizing iridium based phosphorescent polymers.

  2. Principle of minimal work fluctuations.

    Science.gov (United States)

    Xiao, Gaoyang; Gong, Jiangbin

    2015-08-01

    Understanding and manipulating work fluctuations in microscale and nanoscale systems are of both fundamental and practical interest. For example, in considering the Jarzynski equality 〈e-βW〉=e-βΔF, a change in the fluctuations of e-βW may impact how rapidly the statistical average of e-βW converges towards the theoretical value e-βΔF, where W is the work, β is the inverse temperature, and ΔF is the free energy difference between two equilibrium states. Motivated by our previous study aiming at the suppression of work fluctuations, here we obtain a principle of minimal work fluctuations. In brief, adiabatic processes as treated in quantum and classical adiabatic theorems yield the minimal fluctuations in e-βW. In the quantum domain, if a system initially prepared at thermal equilibrium is subjected to a work protocol but isolated from a bath during the time evolution, then a quantum adiabatic process without energy level crossing (or an assisted adiabatic process reaching the same final states as in a conventional adiabatic process) yields the minimal fluctuations in e-βW, where W is the quantum work defined by two energy measurements at the beginning and at the end of the process. In the classical domain where the classical work protocol is realizable by an adiabatic process, then the classical adiabatic process also yields the minimal fluctuations in e-βW. Numerical experiments based on a Landau-Zener process confirm our theory in the quantum domain, and our theory in the classical domain explains our previous numerical findings regarding the suppression of classical work fluctuations [G. Y. Xiao and J. B. Gong, Phys. Rev. E 90, 052132 (2014)].

  3. Medical instruments and devices principles and practices

    CERN Document Server

    Schreiner, Steven; Peterson, Donald R

    2015-01-01

    Medical Instruments and Devices: Principles and Practices originates from the medical instruments and devices section of The Biomedical Engineering Handbook, Fourth Edition. Top experts in the field provide material that spans this wide field. The text examines how biopotential amplifiers help regulate the quality and content of measured signals. It includes instruments and devices that span a range of physiological systems and the physiological scale: molecular, cellular, organ, and system. The book chronicles the evolution of pacemakers and their system operation and discusses oscillometry, cardiac output measurement, and the direct and indirect methods of measuring cardiac output. The authors also expound on the mechanics and safety of defibrillators and cover implantable stimulators, respiration, and the structure and function of mechanical ventilators. In addition, this text covers in depth: Anesthesia Delivery Electrosurgical Units and Devices Biomedical Lasers Measuring Cellular Traction Forces Blood G...

  4. Principles of phosphorescent organic light emitting devices.

    Science.gov (United States)

    Minaev, Boris; Baryshnikov, Gleb; Agren, Hans

    2014-02-07

    Organic light-emitting device (OLED) technology has found numerous applications in the development of solid state lighting, flat panel displays and flexible screens. These applications are already commercialized in mobile phones and TV sets. White OLEDs are of especial importance for lighting; they now use multilayer combinations of organic and elementoorganic dyes which emit various colors in the red, green and blue parts of the visible spectrum. At the same time the stability of phosphorescent blue emitters is still a major challenge for OLED applications. In this review we highlight the basic principles and the main mechanisms behind phosphorescent light emission of various classes of photofunctional OLED materials, like organic polymers and oligomers, electron and hole transport molecules, elementoorganic complexes with heavy metal central ions, and clarify connections between the main features of electronic structure and the photo-physical properties of the phosphorescent OLED materials.

  5. Laser working device

    International Nuclear Information System (INIS)

    Shibanuma, Kiyoshi; Kakudate, Satoshi; Oka, Kiyoshi; Terakado, Takuya; Kondo, Mitsunori; Munakata, Tadashi; Makino, Yoshinobu; Honda, Keizo.

    1995-01-01

    A transmission pipe transmits laser beams along an axis thereof, and is inserted at the top end to a pipeline to be fabricated. A flat mirror is secured to the top end of the transmission pipe, and laser beams are reflected by the mirror, passed through a fabrication nozzle and focused to a fabrication point in the pipeline to be fabricated. A lens-type light focusing system is guided to the fabrication point by a plurality of rollers rotatable in the axial direction disposed in circumferential direction each at an equal pitch at the outer circumference of the transmission pipe. A centering mechanism is disposed for keeping the transmission pipe coaxially with the pipeline to be fabricated. Further, there are also disposed a mirror-type light focusing optical system for focusing light by a paraboloidal mirror and a spherical vehicle rotatable in all directions. A laser fabrication device can be reduced in the size, and it can be used in a high temperature and highly radioactive circumstance. (N.H.)

  6. A bendable and wearable cardiorespiratory monitoring device fusing two noncontact sensor principles.

    Science.gov (United States)

    Teichmann, Daniel; De Matteis, Dennis; Bartelt, Thorsten; Walter, Marian; Leonhardt, Steffen

    2015-05-01

    A mobile device is presented for monitoring both respiration and pulse. The device is developed as a bendable/flexible inlay that can be placed in a shirt pocket or the inside pocket of a jacket. To achieve optimum monitoring performance, the device combines two sensor principles, which work in a safe noncontact way through several layers of cotton or other textiles. One sensor, based on magnetic induction, is intended for respiratory monitoring, and the other is a reflective photoplethysmography sensor intended for pulse detection. Because each sensor signal has some dependence on both physiological parameters, fusing the sensor signals allows enhanced signal coverage.

  7. Safety work with MRI devices in medicine

    International Nuclear Information System (INIS)

    Zivkovic, D.; Hrnjak, M.

    1999-01-01

    This paper gives the basis of biological effects of physical factors which could affect personnel working on MRI devices and patients, and corresponding protection measures. Medical personnel working with MRI devices and patients could be exposed to static magnetic field, time varying fields and radiofrequency radiation, danger from electric current and chemical matters, and there is a high risk from moving metal objects which could wound the persons near-by. The protection from static magnetic field could be ensured by increasing the distance from the source. If MRI device is put in Faradays cage it could be corresponding protection of radiofrequency radiation. (author)

  8. Ten principles of good interdisciplinary team work.

    Science.gov (United States)

    Nancarrow, Susan A; Booth, Andrew; Ariss, Steven; Smith, Tony; Enderby, Pam; Roots, Alison

    2013-05-10

    Interdisciplinary team work is increasingly prevalent, supported by policies and practices that bring care closer to the patient and challenge traditional professional boundaries. To date, there has been a great deal of emphasis on the processes of team work, and in some cases, outcomes. This study draws on two sources of knowledge to identify the attributes of a good interdisciplinary team; a published systematic review of the literature on interdisciplinary team work, and the perceptions of over 253 staff from 11 community rehabilitation and intermediate care teams in the UK. These data sources were merged using qualitative content analysis to arrive at a framework that identifies characteristics and proposes ten competencies that support effective interdisciplinary team work. Ten characteristics underpinning effective interdisciplinary team work were identified: positive leadership and management attributes; communication strategies and structures; personal rewards, training and development; appropriate resources and procedures; appropriate skill mix; supportive team climate; individual characteristics that support interdisciplinary team work; clarity of vision; quality and outcomes of care; and respecting and understanding roles. We propose competency statements that an effective interdisciplinary team functioning at a high level should demonstrate.

  9. Working principle and structure characteristics analysis of the reactivity control drive mechanism

    International Nuclear Information System (INIS)

    Zhao Tianyu; Huang Zhiyong; Chen Feng; He Xuedong

    2010-01-01

    The startup, power regulation and safety shutdown of the nuclear reactor are operated by the reactivity control devices. Reactivity control drive mechanism is a key mechanical transmission component, which directly control the location of the neutron absorber in the core. Its working condition is complex, and its service life should be long., which requires high reliability. PWR as well as newly developed different type of reactors have different control devices drive mechanism. This paper mainly do analysis and comparison about the working environment, mechanical transmission principle, structure, performance, service life and other aspects of PWR, HTR control devices drive mechanism. In addition, this paper is also based on the working principles of reactive control devices drive mechanism, also consider the trends of its design and test verification by the international countries, and discussed the method and feasibility of improving and perfecting the structure and function of drive mechanism. (authors)

  10. All-phosphorus flexible devices with non-collinear electrodes: a first principles study.

    Science.gov (United States)

    Li, Junjun; Ruan, Lufeng; Wu, Zewen; Zhang, Guiling; Wang, Yin

    2018-03-07

    With the continuous expansion of the family of two-dimensional (2D) materials, flexible electronics based on 2D materials have quickly emerged. Theoretically, predicting the transport properties of the flexible devices made up of 2D materials using first principles is of great importance. Using density functional theory combined with the non-equilibrium Green's function formalism, we calculated the transport properties of all-phosphorus flexible devices with non-collinear electrodes, and the results predicted that the device with compressed metallic phosphorene electrodes sandwiching a P-type semiconducting phosphorene shows a better and robust conducting behavior against the bending of the semiconducting region when the angle between the two electrodes is less than 45°, which indicates that this system is very promising for flexible electronics. The calculation of a quantum transport system with non-collinear electrodes demonstrated in this work will provide more interesting information on mesoscopic material systems and related devices.

  11. Physical working principles of medical radar.

    Science.gov (United States)

    Aardal, Øyvind; Paichard, Yoann; Brovoll, Sverre; Berger, Tor; Lande, Tor Sverre; Hamran, Svein-Erik

    2013-04-01

    There has been research interest in using radar for contactless measurements of the human heartbeat for several years. While many systems have been demonstrated, not much attention have been given to the actual physical causes of why this work. The consensus seems to be that the radar senses small body movements correlated with heartbeats, but whether only the movements of the body surface or reflections from internal organs are also monitored have not been answered definitely. There has recently been proposed another theory that blood perfusion in the skin could be the main reason radars are able to detect heartbeats. In this paper, an experimental approach is given to determine the physical causes. The measurement results show that it is the body surface reflections that dominate radar measurements of human heartbeats.

  12. Radon daughters and work at display devices

    International Nuclear Information System (INIS)

    Falk, R.; Nyblom, L.

    1986-01-01

    It has been shown that ions and electrically charged particles in the air can be transported in the electrostatic field between a face and a display device to either the face or the screen. Radon daughters can occur as ions, or sitting on charged particles. This prestudy shows that radon daughters were manifold concentrated on the face of a doll placed in front of a display device, or in a electrostatic field of the kind typical for displaying devices. The radiation dose, in the skin from the radon daughters in an ordinary office environment plus the addition caused by work at a display device, is not strong enough to cause skin damages alone. (BoK)

  13. Principles to promote physician satisfaction and work-life balance.

    Science.gov (United States)

    Shanafelt, Tait D; West, Colin P; Poland, Gregory A; LaRusso, Nicolas F; Menaker, Ronald; Bahn, Rebecca S

    2008-12-01

    Substantial evidence suggests that difficulty balancing their personal and professional life is a major contributor to physician distress. Limited evidence suggests that the mission and policies of health care organizations may relate to physician satisfaction. In this article, we describe principles to promote professional satisfaction and work-life integration developed by the Mayo Clinic department of medicine. These principles can be used to measure and align policies. It is hoped they will serve as a model that can be used by other health care organizations.

  14. Quantum-Classical Correspondence Principle for Work Distributions

    Directory of Open Access Journals (Sweden)

    Christopher Jarzynski

    2015-09-01

    Full Text Available For closed quantum systems driven away from equilibrium, work is often defined in terms of projective measurements of initial and final energies. This definition leads to statistical distributions of work that satisfy nonequilibrium work and fluctuation relations. While this two-point measurement definition of quantum work can be justified heuristically by appeal to the first law of thermodynamics, its relationship to the classical definition of work has not been carefully examined. In this paper, we employ semiclassical methods, combined with numerical simulations of a driven quartic oscillator, to study the correspondence between classical and quantal definitions of work in systems with 1 degree of freedom. We find that a semiclassical work distribution, built from classical trajectories that connect the initial and final energies, provides an excellent approximation to the quantum work distribution when the trajectories are assigned suitable phases and are allowed to interfere. Neglecting the interferences between trajectories reduces the distribution to that of the corresponding classical process. Hence, in the semiclassical limit, the quantum work distribution converges to the classical distribution, decorated by a quantum interference pattern. We also derive the form of the quantum work distribution at the boundary between classically allowed and forbidden regions, where this distribution tunnels into the forbidden region. Our results clarify how the correspondence principle applies in the context of quantum and classical work distributions and contribute to the understanding of work and nonequilibrium work relations in the quantum regime.

  15. Principles and applications of superconducting quantum interference devices

    CERN Document Server

    1992-01-01

    Principles and applications of SQUIDs serves as a textbook and a multi-author collection of critical reviews. Providing both basic aspects and recent progress in SQUIDs technology, it offers a realistic and stimulating picture of the state of the art. It can also contribute to a further development of the field for commercial applications.

  16. Ethical Principles, Process, and the Work of Bioethics Commissions.

    Science.gov (United States)

    Sulmasy, Daniel P

    2017-05-01

    Shortly after the Presidential Commission for the Study of Bioethical Issues was constituted in 2010 and days before the commission members were to join a conference call to discuss possible topics for their deliberation, Craig Venter held a press conference announcing that his lab had created a synthetic chromosome for a species of mycoplasma and had inserted this genetic material into organisms of another species of mycoplasma (the genes of which had been deactivated), transforming the host species into the donor species. While not overtly claiming to have "created life in the test tube," Venter's publicity seemed cleverly designed to provoke the media into reporting his discovery in just that way. The resulting uproar caused President Obama to give his new bioethics commission the assignment of investigating the ethics of the emerging field of synthetic biology. The commission went right to work. It formed working groups to deliberate about parts of the report, feeding ideas and language to the staff members who would do the actual writing, and then present the working group suggestions to the commission as a whole for public deliberation at open meetings. One of those working groups was charged with coming up with ethical principles that would guide the analysis. Having served as a member of that working group, I report here on the process by which these principles emerged and reflect upon the suitability of that process for the work of public bioethics commissions. © 2017 The Hastings Center.

  17. Main principles of developing exploitation models of semiconductor devices

    Science.gov (United States)

    Gradoboev, A. V.; Simonova, A. V.

    2018-05-01

    The paper represents primary tasks, solutions of which allow to develop the exploitation modes of semiconductor devices taking into account complex and combined influence of ionizing irradiation and operation factors. The structure of the exploitation model of the semiconductor device is presented, which is based on radiation and reliability models. Furthermore, it was shown that the exploitation model should take into account complex and combine influence of various ionizing irradiation types and operation factors. The algorithm of developing the exploitation model of the semiconductor devices is proposed. The possibility of creating the radiation model of Schottky barrier diode, Schottky field-effect transistor and Gunn diode is shown based on the available experimental data. The basic exploitation model of IR-LEDs based upon double AlGaAs heterostructures is represented. The practical application of the exploitation models will allow to output the electronic products with guaranteed operational properties.

  18. New principle of feeding for flash evaporation MOCVD devices

    International Nuclear Information System (INIS)

    Kaul, A.R.; Seleznev, B.V.

    1993-01-01

    A novel scheme of flash evaporation feeding for MOCVD processes of multi-component oxide films deposition is proposed. The scheme comprises 1) microdozage of organic solution of solid volatile precursors on the glass fiber belt, 2) evaporation of the solvent and 3) flash evaporation of MOC microdoses from the belt. The functioning of the designed feeder is described and the features of proposed scheme in comparison to existing feeding principles are discussed. (orig.)

  19. First principle leakage current reduction technique for CMOS devices

    CSIR Research Space (South Africa)

    Tsague, HD

    2015-12-01

    Full Text Available This paper presents a comprehensive study of leakage reduction techniques applicable to CMOS based devices. In the process, mathematical equations that model the power-performance trade-offs in CMOS logic circuits are presented. From those equations...

  20. Designing sensory-substitution devices: Principles, pitfalls and potential1.

    Science.gov (United States)

    Kristjánsson, Árni; Moldoveanu, Alin; Jóhannesson, Ómar I; Balan, Oana; Spagnol, Simone; Valgeirsdóttir, Vigdís Vala; Unnthorsson, Rúnar

    2016-09-21

    An exciting possibility for compensating for loss of sensory function is to augment deficient senses by conveying missing information through an intact sense. Here we present an overview of techniques that have been developed for sensory substitution (SS) for the blind, through both touch and audition, with special emphasis on the importance of training for the use of such devices, while highlighting potential pitfalls in their design. One example of a pitfall is how conveying extra information about the environment risks sensory overload. Related to this, the limits of attentional capacity make it important to focus on key information and avoid redundancies. Also, differences in processing characteristics and bandwidth between sensory systems severely constrain the information that can be conveyed. Furthermore, perception is a continuous process and does not involve a snapshot of the environment. Design of sensory substitution devices therefore requires assessment of the nature of spatiotemporal continuity for the different senses. Basic psychophysical and neuroscientific research into representations of the environment and the most effective ways of conveying information should lead to better design of sensory substitution systems. Sensory substitution devices should emphasize usability, and should not interfere with other inter- or intramodal perceptual function. Devices should be task-focused since in many cases it may be impractical to convey too many aspects of the environment. Evidence for multisensory integration in the representation of the environment suggests that researchers should not limit themselves to a single modality in their design. Finally, we recommend active training on devices, especially since it allows for externalization, where proximal sensory stimulation is attributed to a distinct exterior object.

  1. Wearable devices for blood purification: principles, miniaturization, and technical challenges.

    Science.gov (United States)

    Armignacco, Paolo; Lorenzin, Anna; Neri, Mauro; Nalesso, Federico; Garzotto, Francesco; Ronco, Claudio

    2015-01-01

    The prevalences of end-stage renal disease (ESRD) and renal replacement therapy (RRT) continue to increase across the world imposing staggering costs on providers. Therefore, strategies to optimize the treatment and improve survival are of fundamental importance. Despite the benefits of daily dialysis, its implementation is difficult and wearable hemodialysis might represent an alternative by which frequent treatments can be delivered to ESRD patients with much less interference in their routines promoting better quality of life. The development of the wearable artificial kidney (WAK) requires incorporation of basic components of a dialysis system into a wearable device that allows mobility, miniaturization, and above all, patient-oriented management. The technical requirements necessary for WAK can be divided into the following broad categories: dialysis membranes, dialysis regeneration, vascular access, patient monitoring systems, and power sources. Pumping systems for blood and other fluids are the most critical components of the entire device. © 2015 Wiley Periodicals, Inc.

  2. Declarative and Procedural Working Memory: Common Principles, Common Capacity Limits?

    Directory of Open Access Journals (Sweden)

    Klus Oberauer

    2010-10-01

    Full Text Available Working memory is often described as a system for simultaneous storage and processing. Much research – and most measures of working-memory capacity – focus on the storage component only, that is, people's ability to recall or recognize items after short retention intervals. The mechanisms of processing information are studied in a separate research tradition, concerned with the selection and control of actions in simple choice situations, dual-task constellations, or task-switching setups. both research traditions investigate performance based on representations that are temporarily maintained in an active, highly accessible state, and constrained by capacity limits. In this article an integrated theoretical framework of declarative and procedural working memory is presented that relates the two domains of research to each other. Declarative working memory is proposed to hold representations available for processing (including recall and recognition, whereas procedural working memory holds representations that control processing (i. e., task sets, stimulus-response mappings, and executive control settings. The framework motivates two hypotheses: Declarative and procedural working memory have separate capacity limits, and they operate by analogous principles. The framework also suggests a new characterization of executive functions as the subset of processes governed by procedural working memory that has as its output a change in the conditions of operation of the working-memory system.

  3. Group Work with Adolescents: Principles and Practice. Second Edition. Social Work Practice with Children and Families

    Science.gov (United States)

    Malekoff, Andrew

    2006-01-01

    This popular text provides essential knowledge and skills for conducting creative, strengths-based group work with adolescents. A rich introduction to the field, enlivened by numerous illustrations from actual sessions, the book provides principles and guidelines for practice in a wide range of settings. The book covers all phases of group work,…

  4. Design principles for HgTe based topological insulator devices

    Science.gov (United States)

    Sengupta, Parijat; Kubis, Tillmann; Tan, Yaohua; Povolotskyi, Michael; Klimeck, Gerhard

    2013-07-01

    The topological insulator properties of CdTe/HgTe/CdTe quantum wells are theoretically studied. The CdTe/HgTe/CdTe quantum well behaves as a topological insulator beyond a critical well width dimension. It is shown that if the barrier (CdTe) and well-region (HgTe) are altered by replacing them with the alloy CdxHg1-xTe of various stoichiometries, the critical width can be changed. The critical quantum well width is shown to depend on temperature, applied stress, growth directions, and external electric fields. Based on these results, a novel device concept is proposed that allows to switch between a normal semiconducting and topological insulator state through application of moderate external electric fields.

  5. A generalized Poisson solver for first-principles device simulations

    Energy Technology Data Exchange (ETDEWEB)

    Bani-Hashemian, Mohammad Hossein; VandeVondele, Joost, E-mail: joost.vandevondele@mat.ethz.ch [Nanoscale Simulations, ETH Zürich, 8093 Zürich (Switzerland); Brück, Sascha; Luisier, Mathieu [Integrated Systems Laboratory, ETH Zürich, 8092 Zürich (Switzerland)

    2016-01-28

    Electronic structure calculations of atomistic systems based on density functional theory involve solving the Poisson equation. In this paper, we present a plane-wave based algorithm for solving the generalized Poisson equation subject to periodic or homogeneous Neumann conditions on the boundaries of the simulation cell and Dirichlet type conditions imposed at arbitrary subdomains. In this way, source, drain, and gate voltages can be imposed across atomistic models of electronic devices. Dirichlet conditions are enforced as constraints in a variational framework giving rise to a saddle point problem. The resulting system of equations is then solved using a stationary iterative method in which the generalized Poisson operator is preconditioned with the standard Laplace operator. The solver can make use of any sufficiently smooth function modelling the dielectric constant, including density dependent dielectric continuum models. For all the boundary conditions, consistent derivatives are available and molecular dynamics simulations can be performed. The convergence behaviour of the scheme is investigated and its capabilities are demonstrated.

  6. Applying the principles of augmented learning to photonics laboratory work

    Science.gov (United States)

    Fischer, U. H. P.; Haupt, Matthias; Reinboth, Christian; Just, Jens-Uwe

    2007-06-01

    Most modern communication systems are based on opto-electrical methods, wavelength division multiplex (WDM) being the most widespread. Likewise, the use of polymeric fibres (POF) as an optical transmission medium is expanding rapidly. Therefore, enabling students to understand how WDM and/or POF systems are designed and maintained is an important task of universities and vocational schools that offer education in photonics. In the current academic setting, theory is mostly being taught in the classroom, while students gain practical knowledge by performing lab experiments utilizing specialized teaching systems. In an ideal setting, students should perform such experiments with a high degree of autonomy. By applying the principles of augmented learning to photonics training, contemporary lab work can be brought closer to these ideal conditions. This paper introduces "OPTOTEACH", a new teaching system for photonics lab work, designed by Harz University and successfully released on the German market by HarzOptics. OPTOTEACH is the first POF-WDM teaching system, specifically designed to cover a multitude of lab experiments in the field of optical communication technology. It is illustrated, how this lab system is supplemented by a newly developed optical teaching software - "OPTOSOFT" - and how the combination of system and software creates a unique augmented learning environment. The paper details, how the didactic concept for the software was conceptualised and introduces the latest beta version. OPTOSOFT is specifically designed not only as an attachment to OPTOTEACH, it also allows students to rehearse various aspects of theoretical optics and experience a fully interactive and feature-rich self-learning environment. The paper further details the first experiences educators at Harz University have made working with the lab system as well as the teaching software. So far, the augmented learning concept was received mostly positive, although there is some potential

  7. Bring your own device (BYOD) to work trend report

    CERN Document Server

    Hayes, Bob

    2013-01-01

    Bring Your Own Device (BYOD) to Work examines the emerging BYOD (Bring Your Own Device to work) trend in corporate IT. BYOD is the practice of employees bringing personally-owned mobile devices (e.g., smartphones, tablets, laptops) to the workplace, and using those devices to access company resources such as email, file servers, and databases. BYOD presents unique challenges in data privacy, confidentiality, security, productivity, and acceptable use that must be met proactively by information security professionals. This report provides solid background on the practice, original res

  8. Elemental Scanning Devices Authenticate Works of Art

    Science.gov (United States)

    2013-01-01

    To better detect aluminum compounds, Marshall Space Flight Center partnered with KeyMaster Inc. (later acquired by Madison, Wisconsin-based Bruker AXS Inc.) to develop a vacuum pump system that could be attached to X-ray fluorescence (XRF) scanners. The resulting technology greatly expanded XRF scanner capabilities, and hundreds of museums now use them to authenticate artifacts and works of art.

  9. Associative memory cells and their working principle in the brain

    Science.gov (United States)

    Wang, Jin-Hui; Cui, Shan

    2018-01-01

    The acquisition, integration and storage of exogenous associated signals are termed as associative learning and memory. The consequences and processes of associative thinking and logical reasoning based on these stored exogenous signals can be memorized as endogenous signals, which are essential for decision making, intention, and planning. Associative memory cells recruited in these primary and secondary associative memories are presumably the foundation for the brain to fulfill cognition events and emotional reactions in life, though the plasticity of synaptic connectivity and neuronal activity has been believed to be involved in learning and memory. Current reports indicate that associative memory cells are recruited by their mutual synapse innervations among co-activated brain regions to fulfill the integration, storage and retrieval of associated signals. The activation of these associative memory cells initiates information recall in the mind, and the successful activation of their downstream neurons endorses memory presentations through behaviors and emotion reactions. In this review, we aim to draw a comprehensive diagram for associative memory cells, working principle and modulation, as well as propose their roles in cognition, emotion and behaviors. PMID:29487741

  10. Radioprotection regulations of working place and the principle of precaution

    International Nuclear Information System (INIS)

    Maisseu, A.

    2004-01-01

    The World Council of Nuclear Workers, WONUC is an association of the Unions and any other organized bodies of the world's nuclear professionals and workers from industry, research and administration involved in nuclear technologies. WONUC is recognized as an N.G.O. by United Nations. It has a deep interest in radiation protection and in the assessment of the hazards associated with the biological effects of low and very low doses of ionizing radiation for at least three reasons: 1.The nuclear workers represent, with radiologists and technicians in hospitals, the largest group of workers for whom exposure to ionizing radiation is the main occupational hazard. 2.Their families usually live in the vicinity of nuclear plants. 3.They will be in charge of the implementation of any regulations. For these reasons, nuclear workers are very much concerned by the controversies which have arisen with regard to the dose limit and the LNT assessment of the risks associated with exposure to low and very low doses of radiation. This debate is of major importance for the future of the radiation protection system for our working conditions in ionizing environment. Two pitfalls must be avoided: fuelling unjustified anxiety on doubtful bases (the analysis of the Chernobyl data show that unjustified anxiety has been more harmful than ionising radiation) or underestimating the risks associated with exposure to ionizing radiation. As it is clear that following topics: The linear no threshold relationship, the effect of dose rate, DNA repair mechanisms, or indirect effects such as genomic instability and bystander effects, Hormesis, To assess the uncertainty of the various risk assessments and to analyse the scientific ways through which these uncertainties could be reduced, ought to be still discussed, the World Council of Nuclear Worker is claiming for the application of the principle of precaution to have the best advantage of the radiation protection system which will cover any

  11. Conceptual Devices in the Work of World Historians

    Science.gov (United States)

    Harris, Lauren McArthur

    2012-01-01

    This article explores articles from the "Journal of World History", from 1990 to 2008, to uncover conceptual devices world historians use in their work. The goal is to identify promising devices for improving world history instruction. While teaching world history is viewed as increasingly important, lack of clarity regarding course structures and…

  12. Detection of nucleic acids by graphene-based devices: A first-principles study

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Hua [School of Physics and Electronics, Central South University, Changsha 410083 (China); School of Physics and Electronic Science, Changsha University of Science and Technology, Changsha 410114 (China); Xu, Hui, E-mail: xuhui@csu.edu.cn, E-mail: ouyangfp06@tsinghua.org.cn; Ni, Xiang; Lin Peng, Sheng; Liu, Qi; Ping OuYang, Fang, E-mail: xuhui@csu.edu.cn, E-mail: ouyangfp06@tsinghua.org.cn [School of Physics and Electronics, Central South University, Changsha 410083 (China)

    2014-04-07

    Based on first-principles quantum transport calculations, we design a graphene-based biosensor device, which is composed of graphene nanoribbons electrodes and a biomolecule. It is found that when different nucleobases or poly nucleobase chains are located in the nanogap, the device presents completely different transport properties, showing different current informations. And the change of currents from 2 to 5 orders of magnitude for four different nucleobases suggests a great ability of discrimination by utilizing such a device. The physical mechanism of this phenomenon originates from their different chemical composition and structure. Moreover, we also explore the coupling effect of several neighboring bases and the size effect of the nanogap on transport properties. Our results show the possibility of rapid sequencing DNA by measuring such a transverse-current of the device, and provide a new idea for sequencing DNA.

  13. Quantum theory and statistical thermodynamics principles and worked examples

    CERN Document Server

    Hertel, Peter

    2017-01-01

    This textbook presents a concise yet detailed introduction to quantum physics. Concise, because it condenses the essentials to a few principles. Detailed, because these few principles –  necessarily rather abstract – are illustrated by several telling examples. A fairly complete overview of the conventional quantum mechanics curriculum is the primary focus, but the huge field of statistical thermodynamics is covered as well. The text explains why a few key discoveries shattered the prevailing broadly accepted classical view of physics. First, matter appears to consist of particles which, when propagating, resemble waves. Consequently, some observable properties cannot be measured simultaneously with arbitrary precision. Second, events with single particles are not determined, but are more or less probable. The essence of this is that the observable properties of a physical system are to be represented by non-commuting mathematical objects instead of real numbers.  Chapters on exceptionally simple, but h...

  14. First Principles Investigations of Technologically and Environmentally Important Nano-structured Materials and Devices

    Science.gov (United States)

    Paul, Sujata

    In the course of my PhD I have worked on a broad range of problems using simulations from first principles: from catalysis and chemical reactions at surfaces and on nanostructures, characterization of carbon-based systems and devices, and surface and interface physics. My research activities focused on the application of ab-initio electronic structure techniques to the theoretical study of important aspects of the physics and chemistry of materials for energy and environmental applications and nano-electronic devices. A common theme of my research is the computational study of chemical reactions of environmentally important molecules (CO, CO2) using high performance simulations. In particular, my principal aim was to design novel nano-structured functional catalytic surfaces and interfaces for environmentally relevant remediation and recycling reactions, with particular attention to the management of carbon dioxide. We have studied the carbon-mediated partial sequestration and selective oxidation of carbon monoxide (CO), both in the presence and absence of hydrogen, on graphitic edges. Using first-principles calculations we have studied several reactions of CO with carbon nanostructures, where the active sites can be regenerated by the deposition of carbon decomposed from the reactant (CO) to make the reactions self-sustained. Using statistical mechanics, we have also studied the conditions under which the conversion of CO to graphene and carbon dioxide is thermodynamically favorable, both in the presence and in the absence of hydrogen. These results are a first step toward the development of processes for the carbon-mediated partial sequestration and selective oxidation of CO in a hydrogen atmosphere. We have elucidated the atomic scale mechanisms of activation and reduction of carbon dioxide on specifically designed catalytic surfaces via the rational manipulation of the surface properties that can be achieved by combining transition metal thin films on oxide

  15. The Primacy of Principles: Exploring Journalism Educators' Democratic Imperative to Do Good Work

    Science.gov (United States)

    Winters, Caryn L.

    2013-01-01

    By engaging in an interdisciplinary examination of the democracy-education relationship, this humanistic inquiry will identify and explore the principles that define journalism educators' special obligation to do good work. My thesis is prefaced on the notion that determining the principles that guide what it means for educators to do good work in…

  16. I PLAY AT WORK-ten principles for transforming work processes through gamification.

    Science.gov (United States)

    Oprescu, Florin; Jones, Christian; Katsikitis, Mary

    2014-01-01

    Gamified workplaces could be a positive and innovative solution to addressing contemporary problems in organizations. Such problems include high levels of stress, reduced sense of community, reduced loyalty and rapid changes in the workforce. To better prepare organizations for the future it may be helpful to identify and understand the potential advantages, disadvantages and areas for future research in relationship to the use of gamification for personal and organizational wellbeing. An analysis of research literature across disciplines in combination with expert opinion identified gamified workplaces as a promising strategy for promoting wellbeing. Furthermore, this paper proposes a set of 10 principles (I PLAY AT WORK) that may support gamification efforts. In addition to the value of mapping the present for the benefit of the future, there is also considerable value in reshaping core ideas related to the workplaces. Gamified workplaces can provide opportunities for a more vigorous and strategic inter-disciplinary research agenda that can stimulate investments in the area.

  17. Investigation on nickel ferrite nanowire device exhibiting negative differential resistance — a first-principles investigation

    Directory of Open Access Journals (Sweden)

    V. Nagarajan

    2017-06-01

    Full Text Available The electronic property of NiFe_2O_4 nanowire device is investigated through nonequilibrium Green’s functions (NEGF in combination with density functional theory (DFT. The electronic transport properties of NiFe_2O_4 nanowire are studied in terms of density of states, transmission spectrum and I–V characteristics. The density of states gets modified with the applied bias voltage across NiFe_2O_4 nanowire device, the density of charge is observed both in the valence band and in the conduction band on increasing the bias voltage. The transmission spectrum of NiFe_2O_4 nanowire device gives the insights on the transition of electrons at different energy intervals. The findings of the present work suggest that NiFe_2O_4 nanowire device can be used as negative differential resistance (NDR device and its NDR property can be tuned with the bias voltage, which may be used in microwave device, memory devices and in fast switching devices.

  18. Conflict at work: basic principles and applied issues

    NARCIS (Netherlands)

    de Dreu, C.K.W.; Zedeck, S.

    2011-01-01

    Conflict at work is quickly classified as a "darkside" construct that has primarily negative, destructive, and aversive consequences to individual employees’ well-being and task performance, to citizenship behavior and performance in work teams, and to organizational fitness and survival chances. In

  19. Teaching the Principles of Effective Online Course Design: What Works?

    Directory of Open Access Journals (Sweden)

    Clare Gormley

    2014-06-01

    Full Text Available While much has been written about the pedagogy and challenges of online learning, there is comparatively little research that advises how online course design competencies can be achieved. Certainly a growing range of course design resources is being created and made openly available, but there is a need to evaluate their actual impact on practice. This predominantly qualitative study describes the impact of two learning interventions – open online tutorials and a design and development workshop – aimed at introducing the fundamentals of online course design. Four online course developers at an Irish university were interviewed about their experiences creating multimedia-based online courses. Two of the developers were given access to targeted learning interventions and were subsequently interviewed about their experiences using those interventions. The main findings were that novice online course developers can potentially learn and apply design principles through a dedicated introductory phase, techniques that promote discussion of effective pedagogy, and ongoing collaboration in course design. These strategies could be adapted to specific contexts elsewhere.

  20. Comparison of costs of integrating working level devices

    International Nuclear Information System (INIS)

    Langner, G.H. Jr.

    1977-01-01

    For the purpose of deciding upon the method for making routine field measurements of radon and radon daughter products there are primarily two factors to be taken into consideration: how well the various methods measure the parameter of interest and how much they cost. For the purpose of measuring the annual average working level within a structure there are available basically two devices: the integrating air sampler and track etch film. The cost and manpower requirements for each of these two devices are discussed

  1. Principles in Action: The Work of Henri Wallon

    Science.gov (United States)

    Voyat, Gilbert

    1974-01-01

    An examination of the life and philosophy of Henri Wallon, A French psychiatrist, psychologist, and educator, focusing on his views regarding the role of imitation in adaptation and learning, emotional development, syncretic thought, his differences with Piaget, and an assessment of the impact of his work. (EH)

  2. Organic and perovskite solar cells: Working principles, materials and interfaces.

    Science.gov (United States)

    Marinova, Nevena; Valero, Silvia; Delgado, Juan Luis

    2017-02-15

    In the last decades organic solar cells (OSCs) have been considered as a promising photovoltaic technology with the potential to provide reasonable power conversion efficiencies combined with low cost and easy processability. Unexpectedly, Perovskite Solar Cells (PSCs) have experienced unprecedented rise in Power Conversion Efficiency (PCE) thus emerging as a highly efficient photovoltaic technology. OSCs and PSCs are two different kind of devices with distinct charge generation mechanism, which however share some similarities in the materials processing, thus standard strategies developed for OSCs are currently being employed in PSCs. In this article, we recapitulate the main processes in these two types of photovoltaic technologies with an emphasis on interfacial processes and interfacial modification, spotlighting the materials and newest approaches in the interfacial engineering. We discuss on the relevance of well-known materials coming from the OSCs field, which are now being tested in the PSCs field, while maintaining a focus on the importance of the material design for highly efficient, stable and accessible solar cells. Copyright © 2016 Elsevier Inc. All rights reserved.

  3. From games to gamified workplaces. I PLAY AT WORK principles for transforming work processes through gamification.

    Directory of Open Access Journals (Sweden)

    Florin eOprescu

    2014-01-01

    Full Text Available Gamified workplaces could be a positive and innovative solution to addressing contemporary problems in organisations. Such problems include high levels of stress, reduced sense of community, reduced loyalty and rapid changes in the workforce. To better prepare organisations for the future it may be helpful to identify and understand the potential advantages, disadvantages and areas for future research in relationship to the use of gamification for personal and organisational wellbeing. An analysis of research literature across disciplines in combination with expert opinion identified gamified workplaces as a promising strategy for promoting wellbeing. Furthermore, this paper proposes a set of 10 principles as part of a gamification guiding framework (I PLAY AT WORK. In addition to the value of mapping the present for the benefit of the future, there is also considerable value in reshaping core ideas related to the workplaces. Gamified workplaces can provide opportunities for a more vigorous and strategic inter-disciplinary research agenda that can stimulate investments in the area.

  4. Laser physics from principles to practical work in the lab

    CERN Document Server

    Eichhorn, Marc

    2014-01-01

    This textbook originates from a lecture course in laser physics at the Karlsruhe School of Optics and Photonics at the Karlsruhe Institute of Technology (KIT). A main goal in the conception of this textbook was to describe the fundamentals of lasers in a uniform and especially lab-oriented notation and formulation as well as many currently well-known laser types, becoming more and more important in the future. It closes a gap between the measureable spectroscopic quantities and the whole theoretical description and modeling. This textbook contains not only the fundamentals and the context of laser physics in a mathematical and methodical approach important for university-level studies. It allows simultaneously, owing to its conception and its modern notation, to directly implement and use the learned matter in the practical lab work. It is presented in a format suitable for everybody who wants not only to understand the fundamentals of lasers but also use modern lasers or even develop and make laser setups. T...

  5. The next generation mass storage devices - Physical principles and current status

    Science.gov (United States)

    Wang, L.; Gai, S.

    2014-04-01

    The amount of digital data today has been increasing at a phenomenal rate due to the widespread digitalisation service in almost every industry. The need to store such ever-increasing data aggressively triggers the requirement to augment the storage capacity of the conventional storage technologies. Unfortunately, the physical limitations that conventional forms face have severely handicapped their potential to meet the storage need from both consumer and industry point of view. The focus has therefore been switched into the development of the innovative data storage technologies such as scanning probe memory, nanocrystal memory, carbon nanotube memory, DNA memory, and organic memory. In this paper, we review the physical principles of these emerging storage technologies and their superiorities as the next generation data storage device, as well as their respective technical challenges on further enhancing the storage capacity. We also compare these novel technologies with the mainstream data storage means according to the technology roadmap on areal density.

  6. The physics of degradation in engineered materials and devices fundamentals and principles

    CERN Document Server

    Swingler, Jonathan

    2015-01-01

    Degradation is apparent in all things and is fundamental to both manufactured and natural objects. It is often described by the second law of thermodynamics, where entropy, a measure of disorder, tends to increase with time in a closed system. Things age! This concise reference work brings together experts and key players engaged in the physics of degradation to present the background science, current thinking and developments in understanding, and gives a detailed account of emerging issues across a selection of engineering applications. The work has been put together to equip the upper level undergraduate student, postgraduate student, as well as the professional engineer and scientist, in the importance of physics of degradation. The aim of The Physics of Degradation in Engineered Materials and Devices is to bridge the gap between published textbooks on the fundamental science of degradation phenomena and published research on the engineering science of actual fabricated materials and devices. A history o...

  7. Ethical principles in the work of nurse educator-A cross-sectional study.

    Science.gov (United States)

    Salminen, Leena; Stolt, Minna; Metsämäki, Riikka; Rinne, Jenni; Kasen, Anne; Leino-Kilpi, Helena

    2016-01-01

    The application of ethical principles within the teaching profession and nursing practice forms the core of the nurse educator's professional ethics. However, research focusing on the professional ethics of nurse educators is scarce. To describe ethical principles and issues relating to the work of nurse educators from the perspectives of both nurse educators themselves and nursing students. A descriptive study using cross-sectional data and content analysis. Nursing education program involving students from nine polytechnics in Finland. Nursing students (n=202) and nurse educators (n=342). Data were derived from an online survey, with two open-ended questions: Nursing students and nurse educators were asked to name the three main ethical principles that guide the work of nurse educators and also to describe ethical issues involved in the work. Students most often named professionalism, justice, and equality as the main ethical principles for a nurse educator. Nurse educators considered justice, equality, and honesty as the main ethical principles. The content analysis showed that professionalism and the relationship between educator and student were the key categories for ethical issues as perceived by nursing students. Nursing students most often identified inequality between the nurse educator and nursing student as the ethical issue faced by the nurse educator. Nursing students and nurse educators differed somewhat both in their views of the ethical principles guiding an educator's work and in the ethical issues arising in the work. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Elmo Bumpy Torus proof of principle. Phase II - title 1 report. Volume I. Device summary

    International Nuclear Information System (INIS)

    Haas, D.W.

    1982-02-01

    This document presents a summary of the EBT-P Preliminary Design (Title I) effort. The work was performed, under the direction of ORNL, for the Department of Energy by MDAC-St. Louis. Major subcontractors assisting MDAC included General Dynamics for the magnet system, Gilbert Associates for the device utilities and facility architecture and engineering, and Lockheed - Oak Ridge for engineering support services. The Title I period of performance was from 1 October 1980 to 1 March 1982

  9. First-principles thermodynamics and defect kinetics guidelines for engineering a tailored RRAM device

    Energy Technology Data Exchange (ETDEWEB)

    Clima, Sergiu, E-mail: clima@imec.be; Chen, Yang Yin; Goux, Ludovic; Govoreanu, Bogdan; Degraeve, Robin; Fantini, Andrea; Jurczak, Malgorzata [imec, Kapeldreef 75, 3001 Leuven (Belgium); Chen, Chao Yang [imec, Kapeldreef 75, 3001 Leuven (Belgium); Katholieke Universiteit Leuven, 3001 Leuven (Belgium); Pourtois, Geoffrey [imec, Kapeldreef 75, 3001 Leuven (Belgium); PLASMANT, University of Antwerp, 2610 Antwerpen (Belgium)

    2016-06-14

    Resistive Random Access Memories are among the most promising candidates for the next generation of non-volatile memory. Transition metal oxides such as HfOx and TaOx attracted a lot of attention due to their CMOS compatibility. Furthermore, these materials do not require the inclusion of extrinsic conducting defects since their operation is based on intrinsic ones (oxygen vacancies). Using Density Functional Theory, we evaluated the thermodynamics of the defects formation and the kinetics of diffusion of the conducting species active in transition metal oxide RRAM materials. The gained insights based on the thermodynamics in the Top Electrode, Insulating Matrix and Bottom Electrode and at the interfaces are used to design a proper defect reservoir, which is needed for a low-energy reliable switching device. The defect reservoir has also a direct impact on the retention of the Low Resistance State due to the resulting thermodynamic driving forces. The kinetics of the diffusing conducting defects in the Insulating Matrix determine the switching dynamics and resistance retention. The interface at the Bottom Electrode has a significant impact on the low-current operation and long endurance of the memory cell. Our first-principles findings are confirmed by experimental measurements on fabricated RRAM devices.

  10. First-principles thermodynamics and defect kinetics guidelines for engineering a tailored RRAM device

    International Nuclear Information System (INIS)

    Clima, Sergiu; Chen, Yang Yin; Goux, Ludovic; Govoreanu, Bogdan; Degraeve, Robin; Fantini, Andrea; Jurczak, Malgorzata; Chen, Chao Yang; Pourtois, Geoffrey

    2016-01-01

    Resistive Random Access Memories are among the most promising candidates for the next generation of non-volatile memory. Transition metal oxides such as HfOx and TaOx attracted a lot of attention due to their CMOS compatibility. Furthermore, these materials do not require the inclusion of extrinsic conducting defects since their operation is based on intrinsic ones (oxygen vacancies). Using Density Functional Theory, we evaluated the thermodynamics of the defects formation and the kinetics of diffusion of the conducting species active in transition metal oxide RRAM materials. The gained insights based on the thermodynamics in the Top Electrode, Insulating Matrix and Bottom Electrode and at the interfaces are used to design a proper defect reservoir, which is needed for a low-energy reliable switching device. The defect reservoir has also a direct impact on the retention of the Low Resistance State due to the resulting thermodynamic driving forces. The kinetics of the diffusing conducting defects in the Insulating Matrix determine the switching dynamics and resistance retention. The interface at the Bottom Electrode has a significant impact on the low-current operation and long endurance of the memory cell. Our first-principles findings are confirmed by experimental measurements on fabricated RRAM devices.

  11. Main principles of passive devices based on graphene and carbon films in microwave-THz frequency range

    Science.gov (United States)

    Kuzhir, Polina P.; Paddubskaya, Alesia G.; Volynets, Nadezhda I.; Batrakov, Konstantin G.; Kaplas, Tommi; Lamberti, Patrizia; Kotsilkova, Rumiana; Lambin, Philippe

    2017-07-01

    The ability of thin conductive films, including graphene, pyrolytic carbon (PyC), graphitic PyC (GrPyC), graphene with graphitic islands (GrI), glassy carbon (GC), and sandwich structures made of all these materials separated by polymer slabs to absorb electromagnetic radiation in microwave-THz frequency range, is discussed. The main physical principles making a basis for high absorption ability of these heterostructures are explained both in the language of electromagnetic theory and using representation of equivalent electrical circuits. The idea of using carbonaceous thin films as the main working elements of passive radiofrequency (RF) devices, such as shields, filters, polarizers, collimators, is proposed theoretically and proved experimentally. The important advantage of PyC, GrI, GrPyC, and GC is that, in contrast to graphene, they either can be easily deposited onto a dielectric substrate or are strong enough to allow their transfer from the catalytic substrate without a shuttle polymer layer. This opens a new avenue toward the development of a scalable protocol for cost-efficient production of ultralight electromagnetic shields that can be transferred to commercial applications. A robust design via finite-element method and design of experiment for RF devices based on carbon/graphene films and sandwiches is also discussed in the context of virtual prototyping.

  12. New approaches for first-principles modelling of inelastic transport in nanoscale semiconductor devices with thousands of atoms

    DEFF Research Database (Denmark)

    Gunst, Tue; Brandbyge, Mads; Palsgaard, Mattias Lau Nøhr

    2017-01-01

    is in both methods calculated in a post-processing step to a self consistent DFT calculation. The first method is based on first order perturbation theory in the EPC self-energy within the Lowest Order Expansion (LOE) approximation. The method requires calculation of the first-principles EPC in the device......We present two different methods which both enable large-scale first-principles device simulations including electron-phonon coupling (EPC). The methods are based on Density Functional Theory and Nonequilibrium Greens Functions (DFT- NEGF) calculations of electron transport. The inelastic current...

  13. Market survey of forest work tools and heating devices

    International Nuclear Information System (INIS)

    Mutikainen, A.

    2002-01-01

    The TTS Institute has published internet pages where information has been 'gathered on the work tools, equipment, devices and machines needed by forest owners and people who use wood heating. The contact information of manufacturers and merchants for such tools and devices has also been provided. A link to the pages can be found at http://www.tts.fi. The pages are meant to be an aid for product buyers and also for advisory and research use. So far the pages are in trial use and are free of charge. They will be developed on the basis of feedback received. The TTS Institute internet pages operate primarily as a contact list where different product groups and contact information for product manufacturers and merchants can be found. The pages present limited information on the product since updating detailed product information would require intensive market monitoring and great work input. Furthermore, the objective is not to compete in the advertising market, but to publish independent information where the beneficiary is primarily the buyer. The contents of the pages are mainly limited to the products concerned with private forest owners and people who heat detached houses with wood, and information on those products. Information is collected and updated from public sources and also partly direct from the manufacturers and merchants. For clarity, the source of information will be mentioned. (orig.)

  14. Ergonomic evaluation of a wearable assistive device for overhead work.

    Science.gov (United States)

    Rashedi, Ehsan; Kim, Sunwook; Nussbaum, Maury A; Agnew, Michael J

    2014-01-01

    Overhead work is an important risk factor for upper extremity (UE) musculoskeletal disorders. We examined the potential of a mechanical arm and an exoskeletal vest as a wearable assistive device (WADE) for overhead work. Twelve participants completed 10 minutes of simulated, intermittent overhead work, using each of three payloads (1.1, 3.4 and 8.1 kg) and with/without the WADE. Ratings of perceived discomfort (RPDs) and electromyography (EMG) were obtained for the upper arms, shoulders and low back. Using the WADE, UE RPDs decreased by ∼50% with the heavier payloads, whereas smaller (∼25%) and non-significant increases in low-back RPDs were found and were relatively independent of payload. Changes in RPDs with WADE use were consistent with physical demands indicated by EMG, though EMG-based differences in fatigue were less apparent. Participants generally preferred using the WADE, particularly with heavier payloads. These results supported the potential utility of a WADE as an intervention for overhead work.

  15. FROM THE POLISH WORKS ON THE CODIFICATION OF JUDICIAL PRINCIPLES OF CONDUCT

    Directory of Open Access Journals (Sweden)

    Korzeniewska-Lasota Anna

    2017-12-01

    Full Text Available In the article the author depicts the process of creating the codification of judicial principles of professional conduct. Firstly, the author describes the beginnings of the “model of a good judge”, followed thereafter by discussion in judicial environment on the need of normative conceptualization of the principles of conduct, which would constitute a separate collection. The proposals of the ethical codifications are presented, together with the two concluding works: The Judicial Set of Principles of Conduct [Zbiór zasad postępowania sędziów] created by the Association of Judges “Iustitia” and The Set of Principles of Professional Conduct for Judges and Candidate Judges [Zbiór zasad etyki zawodowej sędziów i asesorów Sądowych] by the National Council of the Judiciary in Poland.

  16. A contraband detection system proof-of-principle device using electrostatic acceleration

    International Nuclear Information System (INIS)

    Sredniawski, Joseph J.; Debiak, T.W.; Kamykowski, E.; Rathke, J.; Milton, B.; Rogers, J.; Schmor, P.; Stanford, G.; Brando, J.

    1996-01-01

    A new Contraband Detection System (CDS) Proof-of- Principle (POP) device is nearing completion at Northrop Grumman's Advanced Technology and Development Center. We employ gamma resonance absorption (GRA) to detect nitrogen or chlorine in explosives and certain forms of illegal drugs. Using tomography, 3-D images of the total density and selected element density are generated. These characteristics together may be utilized with considerable confidence in determining if contraband is present in baggage or cargo. The CDS employs a high current (10 mA) DC electrostatic accelerator that provides a beam of protons at either 1.75 or 1.89 MeV. These high energy particles impinge upon a target coated with 13 C or 34 S. The resultant resonant gamma rays are preferentially absorbed in either 14 N or 35 Cl. Because of the penetrating power of the gamma rays, this approach can be utilized for inspection of fully loaded aircraft containers such as the LD3. Our current program calls for testing of the POP CDS by late 1996. This paper presents the overall design and characteristics of the CDS POP. (author)

  17. First-principles calculation of transport property in nano-devices under an external magnetic field

    International Nuclear Information System (INIS)

    Chen Jingzhe; Zhang Jin; Han Rushan

    2008-01-01

    The mesoscopic quantum interference phenomenon (QIP) can be observed and behaves as the oscillation of conductance in nano-devices when the external magnetic field changes. Excluding the factor of impurities or defects, specific QIP is determined by the sample geometry. We have improved a first-principles method based on the matrix Green's function and the density functional theory to simulate the transport behaviour of such systems under a magnetic field. We have studied two kinds of QIP: universal conductance fluctuation (UCF) and Aharonov–Bohm effect (A–B effect). We find that the amplitude of UCF is much smaller than the previous theoretical prediction. We have discussed the origin of difference and concluded that due to the failure of ergodic hypothesis, the ensemble statistics is not applicable, and the conductance fluctuation is determined by the flux-dependent density of states (DOSs). We have also studied the relation between the UCF and the structure of sample. For a specific structure, an atomic circle, the A–B effect is observed and the origin of the oscillation is also discussed

  18. Social work in a society under pressure. Keeping professional principles and standards upright.

    Directory of Open Access Journals (Sweden)

    Willem Blok

    2016-06-01

    Full Text Available This article is based on the content and outcome of the 5th Annual International Conference on Social Work & Social Work Education in Leeuwarden, The Netherlands on February 5, 2016. It shows how Social Work is embedded in society, and describes the pressure of contemporary (international problems on society, and the way in which authorities respond to it. The article continues with a discussion of the answers given by the 200 conference participants on the question how social workers and social work educators could cope with this pressure without denying their international professional principles and standards.

  19. Principle of a liquid nitrogen irradiation device and its realization for use in a swimming-pool type reactor

    International Nuclear Information System (INIS)

    Bochirol, L.; Doulat, J.; Weil, L.

    1961-01-01

    The problem of pile irradiation of samples immersed in liquid nitrogen has been solved with total elimination of explosion hazards and high reliability (no moving parts). The principle of the device is that of a double bath: one of high purity nitrogen cools the samples at the level of the core; a second of commercial nitrogen is located above the first one, outside the high radiation field, and works as a continuous condenser for the pure nitrogen, the flow-back of which is provided simply by gravity. The apparatus described in detail here has been designed for a swimming-pool pile. It was so designed as to provide absolute protection against radiations and to allow the irradiated samples to be easily removed in the cold condition. This apparatus has been in operation for several months. In a fast flux greater than 10 13 neutrons/cm 2 .s and a γ-flux of the order of 10 8 roentgens/h, the consumption of liquid nitrogen is of the order of 100 liters a day. (author) [fr

  20. Control room philosophy: Principles of control room design and control room work

    International Nuclear Information System (INIS)

    Skriver, Jan; Ramberg, Jasmine; Allwin, Pernilla

    2006-01-01

    In order to provide insights for improvement of work in control rooms several factors have to be considered. Knowledge of principles including control room philosophies will guide the recommended improvements. In addition to knowledge about specific principles an advantage for an organization can be an understanding of similarities and policies used in other high risk industry. The report has been developed on the basis of a document analysis of international standards and other guiding documents. (NUREG 0711, ISO 11064, ISO 6385, IEC 60964). In addition to the document analysis which has strived to compare the documents to see similarities in important principals, experience from working with control room design, modifications and evaluations in other high risk industries has pervaded the report. Important principles have been identified which are recommended to be included in a control room philosophy. Many of these are similar to the principles identified in the international standards. An additional principal which is regarded as important is the utilization of Key Performance Indicators (KPI) which can be used as a measure to target preventative means. Further more it is critical that the control room philosophy is easy to access and comprehend for all users. One of the challenges that remain after having developed a control room philosophy is how to utilize it in the daily work situation. It is vital that the document remains as a living document, guiding the continual improvement of the control room in the various life cycle stages

  1. Using Cartoons to Transfer Knowledge Concerning the Principles of Work Disability Prevention Among Stakeholders.

    Science.gov (United States)

    Labrecque, Marie-Elise; Coutu, Marie-France; Durand, Marie-José; Fassier, Jean-Baptiste; Loisel, Patrick

    2016-06-01

    Purpose This study assesses how well two cartoons transfer knowledge of principles of work disability prevention among stakeholders, according to their level of experience. We also document stakeholders' perceptions of the usefulness of the cartoons. Method We performed a descriptive study. Two groups of stakeholders were recruited: (1) experienced (working for more than 2 years in work disability), (2) non-experienced (in training). A self-administered questionnaire with open-ended questions documented stakeholders' understanding of each cartoon box and their perception of the possible usefulness of the cartoons. We transformed qualitative responses into quantitative responses for descriptive purposes. We performed independent t tests to compare the groups' level of understanding, and content analysis for the perception of usefulness. Results Overall, 149 stakeholders (50 experienced and 99 non-experienced) participated and identified 79.4 and 61.4 % of all principles presented in each of the two cartoons respectively. Experienced stakeholders identified more principles compared to non-experienced stakeholders (p = 0.007). Both cartoons were perceived to be useful for knowledge transfer. Conclusions Principles were generally well identified in the cartoons by all participants. Cartoons can be used as an effective tool among stakeholders to achieve a common understanding in order to coordinate their actions.

  2. Evaluation of working air quality by using semipermeable membrane devices

    International Nuclear Information System (INIS)

    Esteve-Turrillas, Francesc A.; Pastor, Agustin; Guardia, Miguel de la

    2008-01-01

    It has been evaluated the use of semipermeable membrane devices (SPMDs) as passive samplers of organophosphorus pesticides from air, in order to determine the contamination of working environments. Additionally, the use of SPMDs as portable samplers has been also considered. The analytical methodology for the determination of diazinon, chlorpyrifos-methyl, pirimiphos-methyl, chlorpyrifos and fenthion in SPMDs exposed to contaminated air was based on microwave-assisted extraction and gas chromatography with mass spectrometry determination. Limit of detection (LOD) values from 2 to 4 ng SPMD -1 and repeatability from 2 to 7% were obtained by using the aforementioned methodology. Theoretical calculated sampling rates were employed for the estimation of the pesticide concentration in air, by using the pesticide mass retained in the deployed SPMD. The obtained LOD values, for a sampling time of 7 days, were from 1 to 2 ng m -3 . The evaluation of the air quality of a pesticide laboratory with an intensive use of diazinon and chlorpyrifos has been made in order to check the operation safety conditions

  3. Evaluation of working air quality by using semipermeable membrane devices

    Energy Technology Data Exchange (ETDEWEB)

    Esteve-Turrillas, Francesc A. [Analytical Chemistry Department, University of Valencia, Edifici Jeroni Munoz, 50 Dr. Moliner, 46100 Burjassot, Valencia (Spain); Pastor, Agustin [Analytical Chemistry Department, University of Valencia, Edifici Jeroni Munoz, 50 Dr. Moliner, 46100 Burjassot, Valencia (Spain)], E-mail: agustin.pastor@uv.es; Guardia, Miguel de la [Analytical Chemistry Department, University of Valencia, Edifici Jeroni Munoz, 50 Dr. Moliner, 46100 Burjassot, Valencia (Spain)

    2008-09-19

    It has been evaluated the use of semipermeable membrane devices (SPMDs) as passive samplers of organophosphorus pesticides from air, in order to determine the contamination of working environments. Additionally, the use of SPMDs as portable samplers has been also considered. The analytical methodology for the determination of diazinon, chlorpyrifos-methyl, pirimiphos-methyl, chlorpyrifos and fenthion in SPMDs exposed to contaminated air was based on microwave-assisted extraction and gas chromatography with mass spectrometry determination. Limit of detection (LOD) values from 2 to 4 ng SPMD{sup -1} and repeatability from 2 to 7% were obtained by using the aforementioned methodology. Theoretical calculated sampling rates were employed for the estimation of the pesticide concentration in air, by using the pesticide mass retained in the deployed SPMD. The obtained LOD values, for a sampling time of 7 days, were from 1 to 2 ng m{sup -3}. The evaluation of the air quality of a pesticide laboratory with an intensive use of diazinon and chlorpyrifos has been made in order to check the operation safety conditions.

  4. Assessing the Influence of Smart Mobile Devices on How Employees Work

    Science.gov (United States)

    Gorski, Adam L.

    2017-01-01

    The smart mobile device market penetration reached 50% and has been increasing an average of 39% per year in the United States. More than 70% of the smart mobile device owners use such devices for personal and work activities. The problem was the lack of management's understanding of the effect smart mobile device use has on how employees work…

  5. Principles of Work Sample Testing. 1. A Non-Empirical Taxonomy of Test Uses

    Science.gov (United States)

    1979-04-01

    UNIVERSITY % ’ Bowling Green , Ohio 43403 e April 1979 Contract DAHC 19-77-C-0007 Cj Prepared for U.S. ARMY RESEARCH INSTITUTEfor the BEHAVIORAL and...inferring changes in enotionality, and GSR is said to be a measure of emotion . Much of psychological measurement is derived measurement, but it is...ARI TECHNICAL REPORT TR-79-A8 Principles of Work Sample Testingi I. A Non-Empirical Taxonomy of Test Uses b y Robert M. Guion BOWLING GREEN STATE

  6. MedlinePlus FAQ: Will MedlinePlus work on my mobile device?

    Science.gov (United States)

    ... mobile.html Question: Will MedlinePlus work on my mobile device? To use the sharing features on this page, ... Some video content might not play on your mobile device. See our FAQ on playing videos on phones ...

  7. Organization principles in visual working memory: Evidence from sequential stimulus display.

    Science.gov (United States)

    Gao, Zaifeng; Gao, Qiyang; Tang, Ning; Shui, Rende; Shen, Mowei

    2016-01-01

    Although the mechanisms of visual working memory (VWM) have been studied extensively in recent years, the active property of VWM has received less attention. In the current study, we examined how VWM integrates sequentially presented stimuli by focusing on the role of Gestalt principles, which are important organizing principles in perceptual integration. We manipulated the level of Gestalt cues among three or four sequentially presented objects that were memorized. The Gestalt principle could not emerge unless all the objects appeared together. We distinguished two hypotheses: a perception-alike hypothesis and an encoding-specificity hypothesis. The former predicts that the Gestalt cue will play a role in information integration within VWM; the latter predicts that the Gestalt cue will not operate within VWM. In four experiments, we demonstrated that collinearity (Experiment 1) and closure (Experiment 2) cues significantly improved VWM performance, and this facilitation was not affected by the testing manner (Experiment 3) or by adding extra colors to the memorized objects (Experiment 4). Finally, we re-established the Gestalt cue benefit with similarity cues (Experiment 5). These findings together suggest that VWM realizes and uses potential Gestalt principles within the stored representations, supporting a perception-alike hypothesis. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Use of advanced programmable logic controllers to monitor and control the Elmo Bumpy Torus-proof-of-principle device

    International Nuclear Information System (INIS)

    Boyd, B.A.

    1983-01-01

    The Elmo Bumpy Torus - Proof-of-Principle (EBT-P) device is designed with an instrumentation and control system based upon the use of an advanced Programmable Logic Controller (PLC). The modern PLC incorporates many advanced programming features not available in earlier PLC's intended for application to conventional relay logic replacement. The additional power and flexibility of these modern PLC's is especially applicable to an experimental device such as EBT-P which is made up of several complex interrelated subsystems whose operational characteristics will be evolving throughout the lifetime of the device. The rationale for the selection of advanced PLC's for EBT-P and the approach taken to design of the software developed to control EBT-P are the topics addressed in this paper

  9. Working Characteristics of a Mechanical Insufflation-Exsufflation Device

    Directory of Open Access Journals (Sweden)

    Yan Shi

    2014-01-01

    Full Text Available Secretions of ventilated patients must be cleared efficiently and timely; to improve the secretion clearance efficiency of an insufflation-exsufflation device (IL-IE device and lay a foundation for the optimization of the IL-IE device, a mathematical model of the ventilation system with the IL-IE device is set up. Through the experimental and simulation research on the ventilation system, it can be concluded that, firstly, the mathematical model is proved to be authentic and reliable. Secondly, with the deposition of secretion or an increase in the respiratory compliance, the peak exsufflation airflow may be reduced. Thirdly, with a decrease in the suction pressure, the peak exsufflation airflow of the ventilated lung may rise proportionally, but the minimum pressure in the ventilated lung may descend proportionally. To improve the efficiency of the secretion clearance but not to injure the ventilated patient, the suction pressure can be elevated properly. Last, increasing the inspiratory positive airway pressure (IPAP is a method to improve the secretion clearance efficiency. This research lays a foundation for improving the secretion clearance efficiency of the IL-IE device.

  10. Elmo Bumpy Torus proof of principle, Phase II: Title 1 report. Volume VIII. Device utilities

    International Nuclear Information System (INIS)

    Erickson, D.T.

    1982-01-01

    This report describes the activities conducted during the Preliminary Design Period for the Device Utilities Systems. All GAI preliminary specifications, drawings, and reports (listed in Section 4.0) have been transmitted to ORNL for review and approval. Device Utility Systems Descriptions are also presented in Section 4.0. The GAI Device Enclosure Gamma Radiation Analysis is presented in Appendix B. Pending design criteria revisions are described in Section 6.0. A type B Change Notice Request (CNR) has been transmitted to GAI. The Type B CNR authorizes cost and schedule assessment for each revision identified. Formal Proposed Design Changes (PDC's) will be provided to ORNL when this data is available

  11. Description and principles of use of an automatic control device usable, in particular, in analytical chemistry

    International Nuclear Information System (INIS)

    Rigaudiere, Roger; Jeanmaire, Lucien

    1969-01-01

    This note describes an automatic control device for the programming of about 20 different functions, chronologically and during a given time. Any voltage can be chosen at the output to perform the different functions. Three examples of utilisation taken in analytical chemistry are given to illustrate the possibilities offered by this device, but its domain of use is much more universal and independent of the type of functions [fr

  12. Work-principle model for predicting toxic fumes of nonideal explosives

    Energy Technology Data Exchange (ETDEWEB)

    Wieland, Michael S. [National Institute of Occupational Safety and Health, Pittsburgh Research Center, P.O. Box 18070, Pittsburgh, PA 15236-0070 (United States)

    2004-08-01

    The work-principle from thermodynamics was used to formulate a model for predicting toxic fumes from mining explosives in underground chamber tests, where rapid turbulent combustion within the surrounding air noticeably changes the resulting concentrations. Two model constants were required to help characterize the reaction zone undergoing rapid chemical transformations in conjunction with heat transfer and work output: a stoichiometry mixing fraction and a reaction-quenching temperature. Rudimentary theory with an unsteady uniform concentration gradient was taken to characterize the combustion zone, yielding 75% for the mixing fraction. Four quenching temperature trends were resolved and compared to test results of ammonium nitrate compositions with different fuel-oil percentages (ANFO). The quenching temperature 2345 K was the optimum choice for fitting the two major components of fume toxicity: carbon monoxide (CO) and total nitrogen oxides (NO{sub X}). The resulting two-constant model was used to generate comparisons for test results of ANFO compositions with additives. Though respectable fits were usually found, charge formulations which reacted weakly could not be resolved numerically. The work-principle model yields toxic concentrations for a range of charge formulations, making it a useful tool for investigating the potential hazard of released fumes and reducing the risk of unwanted incidents. (Abstract Copyright [2004], Wiley Periodicals, Inc.)

  13. Construction techniques and working principles of external cathode Geiger-Mueller counters

    International Nuclear Information System (INIS)

    Sevegnani, Francisco Xavier

    1996-01-01

    In this paper, the construction technique and working principles of the external cathode Geiger-Mueller counter are described in detail. During the analysis of the behavior of these counters a new phenomena was observed, related to an increase int he background rate with the applied voltage. The experiments have also shown that the pulse amplitude of those counters decreases exponentially with the counting rate. The counters built with the techniques described in this paper has shown plateaus of about 1400 V with slope of 0,8%/100 V. (author)

  14. When psychologists work with religious clients: applications of the general principles of ethical conduct.

    Science.gov (United States)

    Yarhouse, M A; VanOrman, B T

    1999-12-01

    Psychologists become more effective and relevant when they appreciate that many clients hold religious values and commitments. Greater awareness of religion and religious values in the lives of clients may aid clinicians' efforts to provide more accurate assessments and effective treatment plans. The authors use the American Psychological Association's (1992) "Ethical Principles of Psychologists and Code of Conduct" as a framework to examine many of the ethical issues relevant when psychologists work with religious clients. This article also provides suggestions for ways in which clinicians may obtain the skills needed to offer competent assessments and interventions with religiously committed clients.

  15. A Symbiosis of Islamic Principles and Basic Human Values on Work and Life

    Directory of Open Access Journals (Sweden)

    Rokis Rohaiza

    2014-07-01

    Full Text Available The article discusses some basic issues on work and life based on Islamic and non-religious principles. Work and life are inseparable facets of and for human existence. Work derives from the demands of life, and thus it becomes a responsibility for every individual person. The article attempts to relate some highlighted Qur’anic verses and Hadith with basic occupational values such as honesty, modesty and innovativeness, among others, at workplaces. In the end, it makes an effort to understand the working of the subconscious mind on work to make life worthwhile. The plan for this article is to lay emphasis that the presence of human beings, which includes their mind, energy and whatever they can offer in the forms of work, benefits all. In such a case, not only those humans may be seen as successful in fulfilling the work-needs, but also victorious in completing the life-demands as human beings. “Virtuous workplace” is the most ideal platform for such purpose.

  16. Principle and Control Design of Active Ground-Fault Arc Suppression Device for Full Compensation of Ground Current

    DEFF Research Database (Denmark)

    Wang, Wen; Zeng, Xiangjun; Yan, Lingjie

    2017-01-01

    current into the neutral without any large-capacity reactors, and thus avoids the aforementioned overvoltage. It compensates all the active, reactive and harmonic components of the ground current to reliably extinguish the ground-fault arcs. A dual-loop voltage control method is proposed to realize arc...... suppression without capacitive current detection. Its time-based feature also brings the benefit of fast response on ground-fault arc suppression. The principle of full current compensation is analyzed, together with the controller design method of the proposed device. Experiment on a prototype was carried...

  17. Elmo Bumpy Torus proof of principle, Phase II: Title 1 report. Volume VIII. Device utilities

    Energy Technology Data Exchange (ETDEWEB)

    Erickson, D.T.

    1982-02-26

    This report describes the activities conducted during the Preliminary Design Period for the Device Utilities Systems. All GAI preliminary specifications, drawings, and reports (listed in Section 4.0) have been transmitted to ORNL for review and approval. Device Utility Systems Descriptions are also presented in Section 4.0. The GAI Device Enclosure Gamma Radiation Analysis is presented in Appendix B. Pending design criteria revisions are described in Section 6.0. A type B Change Notice Request (CNR) has been transmitted to GAI. The Type B CNR authorizes cost and schedule assessment for each revision identified. Formal Proposed Design Changes (PDC's) will be provided to ORNL when this data is available.

  18. Does the principle of minimum work apply at the carotid bifurcation: a retrospective cohort study

    International Nuclear Information System (INIS)

    Beare, Richard J; Das, Gita; Ren, Mandy; Chong, Winston; Sinnott, Matthew D; Hilton, James E; Srikanth, Velandai; Phan, Thanh G

    2011-01-01

    There is recent interest in the role of carotid bifurcation anatomy, geometry and hemodynamic factors in the pathogenesis of carotid artery atherosclerosis. Certain anatomical and geometric configurations at the carotid bifurcation have been linked to disturbed flow. It has been proposed that vascular dimensions are selected to minimize energy required to maintain blood flow, and that this occurs when an exponent of 3 relates the radii of parent and daughter arteries. We evaluate whether the dimensions of bifurcation of the extracranial carotid artery follow this principle of minimum work. This study involved subjects who had computed tomographic angiography (CTA) at our institution between 2006 and 2007. Radii of the common, internal and external carotid arteries were determined. The exponent was determined for individual bifurcations using numerical methods and for the sample using nonlinear regression. Mean age for 45 participants was 56.9 ± 16.5 years with 26 males. Prevalence of vascular risk factors was: hypertension-48%, smoking-23%, diabetes-16.7%, hyperlipidemia-51%, ischemic heart disease-18.7%. The value of the exponent ranged from 1.3 to 1.6, depending on estimation methodology. The principle of minimum work (defined by an exponent of 3) may not apply at the carotid bifurcation. Additional factors may play a role in the relationship between the radii of the parent and daughter vessels

  19. Isotope-labelled urea to test colon drug delivery devices in vivo : principles, calculations and interpretations

    NARCIS (Netherlands)

    Maurer, Marina; Schellekens, Reinout C. A.; Wutzke, Klaus D.; Stellaard, Frans

    2013-01-01

    This paper describes various methodological aspects that were encountered during the development of a system to monitor the in vivo behaviour of a newly developed colon delivery device that enables oral drug treatment of inflammatory bowel diseases. [C-13]urea was chosen as the marker substance.

  20. Personality Development at Work: Workplace Conditions, Personality Changes, and the Corresponsive Principle

    Science.gov (United States)

    Le, Kimdy; Donnellan, M. Brent; Conger, Rand

    2013-01-01

    Objective Investigations concerning adult personality development have increasingly focused on factors that are associated with apparent personality trait changes. The current study contributes to this literature by replicating and extending previous research concerning personality trait development in young adulthood and perceptions of workplace conditions. Method Analyses were based on up to 442 individuals who participated in the ongoing Family Transitions Project (e.g., Conger & Conger, 2002). The current analyses included personality trait data from 1994 and 2003, high-school grades and SES indicators from 1994, and reports about work conditions in 2001, 2003, and 2005. Results Personality attributes were prospectively associated with work conditions and income. Findings also support the corresponsive principle of personality development (e.g. Roberts, Caspi, & Moffitt, 2003): Traits that were prospectively associated with particular workplace conditions often seemed to be accentuated by those conditions. Conclusions Personality traits are prospectively associated with perceptions of the workplace. Workplace conditions are also associated with trait development. PMID:23336723

  1. Personality Development at Work: Workplace Conditions, Personality Changes, and the Corresponsive Principle.

    Science.gov (United States)

    Le, Kimdy; Donnellan, M Brent; Conger, Rand

    2014-02-01

    Investigations concerning adult personality development have increasingly focused on factors that are associated with apparent personality trait changes. The current study contributes to this literature by replicating and extending previous research concerning personality trait development in young adulthood and perceptions of workplace conditions. Analyses were based on up to 442 individuals who participated in the ongoing Family Transitions Project (e.g., Conger & Conger, 2002). The current analyses included personality trait data from 1994 and 2003, high school grades and socioeconomic status indicators from 1994, and reports about work conditions in 2001, 2003, and 2005. Personality attributes were prospectively associated with work conditions and income. Findings also support the corresponsive principle of personality development (e.g., Roberts, Caspi, & Moffitt, 2003): Traits that were prospectively associated with particular workplace conditions often seemed to be accentuated by those conditions. Personality traits are prospectively associated with perceptions of the workplace. Workplace conditions are also associated with trait development. © 2013 Wiley Periodicals, Inc.

  2. First principles design of divacancy defected graphene nanoribbon based rectifying and negative differential resistance device

    Energy Technology Data Exchange (ETDEWEB)

    Chakrabarty, Soubhik; Wasey, A. H. M. Abdul; Das, G. P., E-mail: msgpd@iacs.res.in, E-mail: ranjit.t@res.srmuniv.ac.in [Department of Materials Science, Indian Association for the Cultivation of Science, Jadavpur, Kolkata-700032 (India); Thapa, Ranjit, E-mail: msgpd@iacs.res.in, E-mail: ranjit.t@res.srmuniv.ac.in [SRM Research Institute, SRM University, Kattankulathur - 603203, Tamil Nadu (India)

    2015-08-15

    We have studied using density functional theory and non-equilibrium Green’s function based approach, the electronic structures of 555-777 divacancy (DV) defected armchair edged graphene nanoribbons (AGNR) as well as the transport properties of AGNR based two-terminal devices constructed with one defected electrode and one N doped electrode. Introduction of 555-777 DV defect into AGNR results in shifting of the π and π∗ bands towards the higher energy value indicating a downward shift of the Fermi level. Formation of a potential barrier, analogous to that of conventional p-n junction, has been observed across the junction of defected and N-doped AGNR. The two terminal devices show diode like property with high rectifying efficiency for a wide range of bias voltages. The devices also show robust negative differential resistance with very high peak-to-valley ratio. Shift of the electrode energy states and modification of the transmission function with applied bias have been analyzed, in order to gain an insight into the nonlinear and asymmetric behavior of the current-voltage characteristics. Variation of the transport properties on the width of the ribbons has also been discussed.

  3. First principles design of divacancy defected graphene nanoribbon based rectifying and negative differential resistance device

    Directory of Open Access Journals (Sweden)

    Soubhik Chakrabarty

    2015-08-01

    Full Text Available We have studied using density functional theory and non-equilibrium Green’s function based approach, the electronic structures of 555-777 divacancy (DV defected armchair edged graphene nanoribbons (AGNR as well as the transport properties of AGNR based two-terminal devices constructed with one defected electrode and one N doped electrode. Introduction of 555-777 DV defect into AGNR results in shifting of the π and π∗ bands towards the higher energy value indicating a downward shift of the Fermi level. Formation of a potential barrier, analogous to that of conventional p-n junction, has been observed across the junction of defected and N-doped AGNR. The two terminal devices show diode like property with high rectifying efficiency for a wide range of bias voltages. The devices also show robust negative differential resistance with very high peak-to-valley ratio. Shift of the electrode energy states and modification of the transmission function with applied bias have been analyzed, in order to gain an insight into the nonlinear and asymmetric behavior of the current-voltage characteristics. Variation of the transport properties on the width of the ribbons has also been discussed.

  4. Lean principles optimize on-time vascular surgery operating room starts and decrease resident work hours.

    Science.gov (United States)

    Warner, Courtney J; Walsh, Daniel B; Horvath, Alexander J; Walsh, Teri R; Herrick, Daniel P; Prentiss, Steven J; Powell, Richard J

    2013-11-01

    Lean process improvement techniques are used in industry to improve efficiency and quality while controlling costs. These techniques are less commonly applied in health care. This study assessed the effectiveness of Lean principles on first case on-time operating room starts and quantified effects on resident work hours. Standard process improvement techniques (DMAIC methodology: define, measure, analyze, improve, control) were used to identify causes of delayed vascular surgery first case starts. Value stream maps and process flow diagrams were created. Process data were analyzed with Pareto and control charts. High-yield changes were identified and simulated in computer and live settings prior to implementation. The primary outcome measure was the proportion of on-time first case starts; secondary outcomes included hospital costs, resident rounding time, and work hours. Data were compared with existing benchmarks. Prior to implementation, 39% of first cases started on time. Process mapping identified late resident arrival in preoperative holding as a cause of delayed first case starts. Resident rounding process inefficiencies were identified and changed through the use of checklists, standardization, and elimination of nonvalue-added activity. Following implementation of process improvements, first case on-time starts improved to 71% at 6 weeks (P = .002). Improvement was sustained with an 86% on-time rate at 1 year (P < .001). Resident rounding time was reduced by 33% (from 70 to 47 minutes). At 9 weeks following implementation, these changes generated an opportunity cost potential of $12,582. Use of Lean principles allowed rapid identification and implementation of perioperative process changes that improved efficiency and resulted in significant cost savings. This improvement was sustained at 1 year. Downstream effects included improved resident efficiency with decreased work hours. Copyright © 2013 Society for Vascular Surgery. Published by Mosby, Inc. All

  5. New handling systems as technical support for the working process. Part 6. Feeding devices

    Energy Technology Data Exchange (ETDEWEB)

    Becher, H; Burkhardt, R; Drexel, P; Graf, B; Krreis, W

    1982-03-01

    Social, technical and economic reasons require an enhanced application of handling systems such as industrial robots. Quality and efficiency of an industrial robot depends greatly on feeding devices, and the ARGE-HHS within its project new handling systems as a technical aid in the working process intends to analyze all feeding devices that are likely to be most suitable for advanced applications. Forty one feeding devices were developed, known devices were modified, adapted to different applications, and tested. A variety of feeding devices for most applications in the field of material handling is reported.

  6. I PLAY AT WORK—ten principles for transforming work processes through gamification

    Science.gov (United States)

    Oprescu, Florin; Jones, Christian; Katsikitis, Mary

    2014-01-01

    Gamified workplaces could be a positive and innovative solution to addressing contemporary problems in organizations. Such problems include high levels of stress, reduced sense of community, reduced loyalty and rapid changes in the workforce. To better prepare organizations for the future it may be helpful to identify and understand the potential advantages, disadvantages and areas for future research in relationship to the use of gamification for personal and organizational wellbeing. An analysis of research literature across disciplines in combination with expert opinion identified gamified workplaces as a promising strategy for promoting wellbeing. Furthermore, this paper proposes a set of 10 principles (I PLAY AT WORK) that may support gamification efforts. In addition to the value of mapping the present for the benefit of the future, there is also considerable value in reshaping core ideas related to the workplaces. Gamified workplaces can provide opportunities for a more vigorous and strategic inter-disciplinary research agenda that can stimulate investments in the area. PMID:24523704

  7. Mathematical and empirical proof of principle for an on-body personal lift augmentation device (PLAD).

    Science.gov (United States)

    Abdoli-Eramaki, Mohammad; Stevenson, Joan M; Reid, Susan A; Bryant, Timothy J

    2007-01-01

    In our laboratory, we have developed a prototype of a personal lift augmentation device (PLAD) that can be worn by workers during manual handling tasks involving lifting or lowering or static holding in symmetric and asymmetric postures. Our concept was to develop a human-speed on-body assistive device that would reduce the required lumbar moment by 20-30% without negative consequences on other joints or lifting kinematics. This paper provides mathematical proof using simplified free body diagrams and two-dimensional moment balance equations. Empirical proof is also provided based on lifting trials with nine male subjects who executed sagittal plane lifts using three lifting styles (stoop, squat, free) and three different loads (5, 15, and 25kg) under two conditions (PLAD, No-PLAD). Nine Fastrak sensors and six in-line strap force sensors were used to estimate the reduction of compressive and shear forces on L4/L5 as well as estimate the forces transferred to the shoulders and knees. Depending on lifting technique, the PLAD applied an added 23-36Nm of torque to assist the back muscles during lifting tasks. The peak pelvic girdle contact forces were estimated and their magnitudes ranged from 221.3+/-11.2N for stoop lifting, 324.3+/-17.2N for freestyle lifts to 468.47+/-23.2N for squat lifting. The PLAD was able to reduce the compression and shear forces about 23-29% and 7.9-8.5%, respectively.

  8. Applications of Context-Aware Computing in Hospital Work - Examples and Design Principles

    DEFF Research Database (Denmark)

    Bardram, Jacob Eyvind

    2004-01-01

    Context-awareness is a key concept in ubiquitous computing, which sometimes seems to be a technology looking for a purpose. In this paper we report on the application of context-aware computing for medical work in hospitals, which has appeared to be a strong case for applying context-aware comput...... of designing, developing, and evaluating context-aware clinical applications, the paper outlines some key design principles for a context-awareness framework, supporting the development and deployment of context-aware clinical computer applications.......Context-awareness is a key concept in ubiquitous computing, which sometimes seems to be a technology looking for a purpose. In this paper we report on the application of context-aware computing for medical work in hospitals, which has appeared to be a strong case for applying context......-aware computing. We present the design of a context-aware pill container and a context-aware hospital bed, both of which reacts and adapts according to what is happening in their context. The applications have been evaluated in a number of workshop with clinicians and patients. Based on this empirical work...

  9. Intelligent Fiber Optic Sensor for Estimating the Concentration of a Mixture-Design and Working Principle

    Directory of Open Access Journals (Sweden)

    Michal Borecki

    2007-03-01

    Full Text Available This paper presents the construction and working principles of an intelligent fiber-optic intensity sensor used for examining the concentration of a mixture in conjunction with water. It can find applications e.g. in waste-water treatment plant for selection of a treatment process. The sensor head is the end of a large core polymer optical fiber, which constitutes one arm of an asymmetrical coupler. The head works on the reflection intensity basis. The reflected signal level depends on the Fresnel reflection from the air and from the mixture examined when the head is immersed in it. The sensor head is mounted on a lift. For detection purposes the signal can be measured on head submerging, submersion, emerging and emergence. Therefore, the measured signal depends on the surface tension, viscosity, turbidity and refraction coefficient of the solution. The signal coming from the head is processed electrically in an opto-electronic interface. Then it is fed to a neural network. The novelty of the proposed sensor lies in that it contains an asymmetrical coupler and a neural network that works in the generalization mode. The sensor resolution depends on the efficiency of the asymmetrical coupler, the precision of the opto-electronic signal conversion and the learning accuracy of the neural network. Therefore, the number and quality of the points used for the learning process is very important. By way of example, the paper describes a sensor intended for examining the concentration of liquid soap in water.

  10. Principles of methodology guiding the study of religion as found in the work of Friedrich Heiler

    Directory of Open Access Journals (Sweden)

    Tatiana Samarina

    2013-02-01

    Full Text Available The issue of methodology in the study of religious phenomena appears as problematic to those Russian experts who deal with the scientific study of religious phenomena. On the other hand, western European researchers have already made much positive progress in this direction. This article attempts to define the principles which guide the scholar in the study of religion as found in the work of the renowned German scholar Friedrich Heiler. The author’s starting point is Heiler’s fundamental concept which permeates all his work and is most clearly defined in his last monograph: «Erscheinungsformen und Wesen der Religion». Heiler gives several pointers to students of religion: attention to detail, a fi rm grounding in the core matter of the object to be studies, and at the same time a comprehensive and panoramic view of religion and religious phenomena as a whole. The author concludes that Heiler’s protracted study of both Christianity and the Eastern religions led him to regard the phenomenological method as the most eff ective. The author presupposes a negative reception of this method by Russian students of religious phenomena due to the fact that the latter are too unfamiliar with Heiler’s work and conclusions

  11. Advanced Energy Storage Devices: Basic Principles, Analytical Methods, and Rational Materials Design

    Science.gov (United States)

    Liu, Jilei; Wang, Jin; Xu, Chaohe; Li, Chunzhong; Lin, Jianyi

    2017-01-01

    Abstract Tremendous efforts have been dedicated into the development of high‐performance energy storage devices with nanoscale design and hybrid approaches. The boundary between the electrochemical capacitors and batteries becomes less distinctive. The same material may display capacitive or battery‐like behavior depending on the electrode design and the charge storage guest ions. Therefore, the underlying mechanisms and the electrochemical processes occurring upon charge storage may be confusing for researchers who are new to the field as well as some of the chemists and material scientists already in the field. This review provides fundamentals of the similarities and differences between electrochemical capacitors and batteries from kinetic and material point of view. Basic techniques and analysis methods to distinguish the capacitive and battery‐like behavior are discussed. Furthermore, guidelines for material selection, the state‐of‐the‐art materials, and the electrode design rules to advanced electrode are proposed. PMID:29375964

  12. Testing principle working mechanisms of the health action process approach for subjective physical age groups.

    Science.gov (United States)

    Wienert, Julian; Kuhlmann, Tim; Fink, Sebastian; Hambrecht, Rainer; Lippke, Sonia

    2016-01-01

    This study investigated differences in social-cognitive predictors and self-regulatory planning, as proposed by the health action process approach (HAPA), across three different subjective physical age groups for physical activity. With a cross-sectional design, 521 participants across the chronological age span from 25 to 86 years (M = 48.79; SD = 12.66) were separated into three groups: those who feel physically younger than they are in terms of chronological age, the same perceived and chronological age, and feeling physically older compared to their chronological age. Participants were assessed regarding their perceived vulnerability, outcome expectancies, general intentions, planning, self-efficacy, and stages of physical activity (non-intenders, intenders, and actors). Data were analysed via mean comparison and multigroup structural equation modelling. Mean differences for all but one construct were eminent in all groups, generally showing that those feeling physically younger also report better social-cognitive predictors of physical activity (e.g. lower perceived vulnerability) in comparison to those who feel the same age or older. The model showed that basic working mechanisms of the HAPA can be applied to all groups. With that, the results provide for the first time evidence that principle working mechanism of the HAPA can be applied to all subjective physical age groups. These may be used to tailor health promoting interventions according to participants' needs as a more suitable proxy than chronological age.

  13. General working principles of CH3NH3PbX3 perovskite solar cells.

    Science.gov (United States)

    Gonzalez-Pedro, Victoria; Juarez-Perez, Emilio J; Arsyad, Waode-Sukmawati; Barea, Eva M; Fabregat-Santiago, Francisco; Mora-Sero, Ivan; Bisquert, Juan

    2014-02-12

    Organometal halide perovskite-based solar cells have recently realized large conversion efficiency over 15% showing great promise for a new large scale cost-competitive photovoltaic technology. Using impedance spectroscopy measurements we are able to separate the physical parameters of carrier transport and recombination in working devices of the two principal morphologies and compositions of perovskite solar cells, viz. compact thin films of CH3NH3PbI(3-x)Clx and CH3NH3PbI3 infiltrated on nanostructured TiO2. The results show nearly identical spectral characteristics indicating a unique photovoltaic operating mechanism that provides long diffusion lengths (1 μm). Carrier conductivity in both devices is closely matched, so that the most significant differences in performance are attributed to recombination rates. These results highlight the central role of the CH3NH3PbX3 semiconductor absorber in carrier collection and provide a new tool for improved optimization of perovskite solar cells. We report for the first time a measurement of the diffusion length in a nanostructured perovskite solar cell.

  14. Mobile devices in the operating rooms: intended and unintended consequences for nurses’ work

    NARCIS (Netherlands)

    Sergeeva, A.; Aij, K.H.; van den Hooff, B.J.; Huysman, M.H.

    2016-01-01

    This article reports the results of a case study of the consequences of mobile device use for the work practices of operating room nurses. The study identifies different patterns of mobile technology use by operating room nurses, including both work-related and non-work-related use. These patterns

  15. Synergy of first principles modelling with predictive control for a biventricular assist device: In silico evaluation study.

    Science.gov (United States)

    Koh, Vivian C A; Yong Kuen Ho; Stevens, Michael C; Salamonsen, Robert F; Lovell, Nigel H; Lim, Einly

    2017-07-01

    Control for dual rotary left ventricular assist devices (LVADs) used as a biventricular assist device (BiVAD) is challenging. If the control system fails, flow imbalance between the systemic and the pulmonary circulations would result, subsequently leading to ventricular suction or pulmonary congestion. With the expectation that advanced control approaches such as model predictive control could address the challenges naturally and effectively, we developed a synergistic first principles model predictive controller (MPC) for the BiVAD. The internal model of the MPC is a simplified state-space model that has been developed and validated in a previous study. A single Frank-Starling (FS) control curve was used to define the target pump flow corresponding to the preload on each side of the heart. The MPC was evaluated in a validated numerical model using three clinical scenarios: blood loss, myocardial recovery, and exercise. Simulation results showed that the MPC was effective in adapting to changes in physiological states without causing ventricular suction or pulmonary congestion. The use of MPC for a BiVAD eliminates the need for two controllers of dual LVADs thus making the task of controller tuning easier.

  16. Advanced modern superconductive materials for the machines and devices working on the principles of levitation

    International Nuclear Information System (INIS)

    Prikhna, T.A.; Novikov, N.V.; Savchuk, Ya.M.; Sverdun, V.V.

    2005-01-01

    By the high-pressure (2 GPa) high-temperature (800-900 degree C) synthesis from Mg and B taken in the MgB 2 stoichiometric ratio and with 10 wt.% of Ti, the MgB 2 -based nanostructural superconductive material with the record values of critical current density, J c , and the irreversible fields has been obtained

  17. Middle classes: theoretical principles, contemporary working out, regarding the hired workers

    Directory of Open Access Journals (Sweden)

    Vyacheslav Nikolaevich Bobkov

    2014-06-01

    Full Text Available The article deals with the problems of defining middle classes. Theoretical principles of social and class structures, including middle classes, are examined. The criteria of reckoning some hired workers as middle classes worked out on the basis of normative methodology (normative criteria are submitted, the most important of them being educational qualifications, occupation, personal income and provision of housing. Methods of statistical and sociologic analysing data are applied. The results of analysing the conformity of the hired workers to the normative criteria of representing middle classes are produced. It is determined that today heads of organizations and their subdivisions as well as certified top and middle management specialists representing middle classes comprise only 2-3 per cent of the total number of the hired workers. It should be noted that there are practically no-one among them who has got a family with two and more children. The low level of wages is the main reason for that. In addition there are some other reasons, too. The results of the research could find application in the state social and economic policy

  18. Associative memory cells and their working principle in the brain [version 1; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Jin-Hui Wang

    2018-01-01

    Full Text Available The acquisition, integration and storage of exogenous associated signals are termed as associative learning and memory. The consequences and processes of associative thinking and logical reasoning based on these stored exogenous signals can be memorized as endogenous signals, which are essential for decision making, intention, and planning. Associative memory cells recruited in these primary and secondary associative memories are presumably the foundation for the brain to fulfill cognition events and emotional reactions in life, though the plasticity of synaptic connectivity and neuronal activity has been believed to be involved in learning and memory. Current reports indicate that associative memory cells are recruited by their mutual synapse innervations among co-activated brain regions to fulfill the integration, storage and retrieval of associated signals. The activation of these associative memory cells initiates information recall in the mind, and the successful activation of their downstream neurons endorses memory presentations through behaviors and emotion reactions. In this review, we aim to draw a comprehensive diagram for associative memory cells, working principle and modulation, as well as propose their roles in cognition, emotion and behaviors.

  19. On Coping and Defending: Applying Bruner's Personal Growth Principles to Working with Gifted/Talented Students.

    Science.gov (United States)

    Culross, Rita R.; Jenkins-Friedman, Reva

    1988-01-01

    The article describes two approaches, based on the ideas of Jerome Bruner, to helping gifted students handle the social-emotional tasks involved in actualizing their abilities. One approach stresses developmental principles of Bruner while the other applies Bruner's principles to personal and group empowering. (DB)

  20. The Working Principle and Use of High Pressures in the Food Industry

    Directory of Open Access Journals (Sweden)

    Karlović, S.

    2010-11-01

    Full Text Available High pressure in the food industry, as a new non-thermal method, is applied in many phases of food processing. This new non-thermal technology was developed in the 1990s. The main advantages of high-pressure processing are in the short time of processing which is between a few seconds and 30 minutes. Processing of solid or liquid food products with or without packaginghappens in the temperature interval 5 – 90 °C, and pressures 50 – 1000 MPa. The driving pressure is distributed uniformly through the whole product independently of its quantity and shape. These processing characteristics combined with improved food microbiological safety, less energy expenditure, low concentration of waste products and longer shelf life make high-pressure processing a very promising novel food technology. Combined with lower cost of treatment (but unfortunately higher initial cost of equipment compared to traditional processing technologies, it is also economically profitable. The main purpose of such treated food products are in preservation of sensory, nutritive and textural properties. As the temperature increase is very low, there are no significant changes in sensory properties, in contrast to conventional thermal processing (sterilization, pasteurization. However, with the combination of heating or cooling and high pressure, modification of existing and creation of new food products is possible. Today, high pressure is used for the treatment of meat products (inactivation of microorganisms, freezing and defrosting of foodstuffs, production of fruit juices (pasteurization, processing of oysters, modificationof milk characteristics (foaming etc. The main purpose of this work is to present the working principle and application of high pressure in the food industry.

  1. 77 FR 17457 - Work Group on Alternative Test Methods for Commercial Measuring Devices

    Science.gov (United States)

    2012-03-26

    ... DEPARTMENT OF COMMERCE National Institute of Standards and Technology Work Group on Alternative... Work Group (WG) to examine alternative methods for testing the accuracy of commercial measuring devices... participates to promote uniformity among the states in laws, regulations, methods, and testing equipment that...

  2. Person factors and work environments of workers who use mobility devices.

    Science.gov (United States)

    Gray, David B; Morgan, Kerri A; Gottlieb, Meghan; Hollingsworth, Holly H

    2014-01-01

    Nearly 25% of people with mobility impairments and limitations who are of working age are employed, yet few studies have examined their perspectives on their jobs or work environments required to complete job tasks. The purpose of this study was to describe the factors that contribute to successful employment for those who use mobility devices. A convenience sample of 132 workers who use power wheelchairs, manual wheelchairs, canes, crutches or walkers. Participants completed an online version of the Mobility Device User Work Survey (MWS). A multivariate analysis and a two-step multiple linear regression analysis were used. Study participants had few secondary health conditions that influenced their work. Employee satisfactoriness to their employers was high. Accessibility of worksites was high. Assistive technologies were inexpensive, and personal assistance was used infrequently and usually was unpaid. Co-worker communications were very positive. Flexible work rules and supportive managers were highly valued. Job satisfaction positively correlated with accessibility, work tasks, co-worker communication and work support. The description of work environments of successfully employed mobility device users can provide some useful guidance to employers, vocational rehabilitation (VR) counselors and unemployed mobility device users to balance employee abilities and preferences with the needs of employers.

  3. Field testing, comparison, and discussion of five aeolian sand transport measuring devices operating on different measuring principles

    Science.gov (United States)

    Goossens, Dirk; Nolet, Corjan; Etyemezian, Vicken; Duarte-Campos, Leonardo; Bakker, Gerben; Riksen, Michel

    2018-06-01

    Five types of sediment samplers designed to measure aeolian sand transport were tested during a wind erosion event on the Sand Motor, an area on the west coast of the Netherlands prone to severe wind erosion. Each of the samplers operates on a different principle. The MWAC (Modified Wilson And Cooke) is a passive segmented trap. The modified Leatherman sampler is a passive vertically integrating trap. The Saltiphone is an acoustic sampler that registers grain impacts on a microphone. The Wenglor sampler is an optical sensor that detects particles as they pass through a laser beam. The SANTRI (Standalone AeoliaN Transport Real-time Instrument) detects particles travelling through an infrared beam, but in different channels each associated with a particular grain size spectrum. A procedure is presented to transform the data output, which is different for each sampler, to a common standard so that the samplers can be objectively compared and their relative efficiency calculated. Results show that the efficiency of the samplers is comparable despite the differences in operating principle and the instrumental and environmental uncertainties associated to working with particle samplers in field conditions. The ability of the samplers to register the temporal evolution of a wind erosion event is investigated. The strengths and weaknesses of the samplers are discussed. Some problems inherent to optical sensors are looked at in more detail. Finally, suggestions are made for further improvement of the samplers.

  4. Treatment of Mobbing in School: Principles for and the Results of the Work of an Anti Mobbing Group

    Science.gov (United States)

    Pikas, Anatol

    1975-01-01

    Article attempted to define the concept of mobbing and to develop principles of treatment in connection with cases which really occur, and to use the work in a regular university course providing students with successful personal therapeutic experiences. (Author/RK)

  5. A full-duplex working integrated optoelectronic device for optical interconnect

    Science.gov (United States)

    Liu, Kai; Fan, Huize; Huang, Yongqing; Duan, Xiaofeng; Wang, Qi; Ren, Xiaomin; Wei, Qi; Cai, Shiwei

    2018-05-01

    In this paper, a full-duplex working integrated optoelectronic device is proposed. It is constructed by integrating a vertical cavity surface emitting laser (VCSEL) unit above a resonant cavity enhanced photodetector (RCE-PD) unit. Analysis shows that, the VCSEL unit has a threshold current of 1 mA and a slop efficiency of 0.66 W/A at 849.7 nm, the RCE-PD unit obtains its maximal absorption quantum efficiency of 90.24% at 811 nm with a FWHM of 4 nm. Moreover, the two units of the proposed integrated device can work independently from each other. So that the proposed integrated optoelectronic device can work full-duplex. It can be applied for single fiber bidirectional optical interconnects system.

  6. Control room philosophy: Principles of control room design and control room work; Kontrollrumsfilosofi: Principer foer kontrollrumsutformning och kontrollrumsarbete

    Energy Technology Data Exchange (ETDEWEB)

    Skriver, Jan; Ramberg, Jasmine; Allwin, Pernilla [Scandpower Risk Management AB, Uppsala (Sweden)

    2006-01-15

    In order to provide insights for improvement of work in control rooms several factors have to be considered. Knowledge of principles including control room philosophies will guide the recommended improvements. In addition to knowledge about specific principles an advantage for an organization can be an understanding of similarities and policies used in other high risk industry. The report has been developed on the basis of a document analysis of international standards and other guiding documents. (NUREG 0711, ISO 11064, ISO 6385, IEC 60964). In addition to the document analysis which has strived to compare the documents to see similarities in important principals, experience from working with control room design, modifications and evaluations in other high risk industries has pervaded the report. Important principles have been identified which are recommended to be included in a control room philosophy. Many of these are similar to the principles identified in the international standards. An additional principal which is regarded as important is the utilization of Key Performance Indicators (KPI) which can be used as a measure to target preventative means. Further more it is critical that the control room philosophy is easy to access and comprehend for all users. One of the challenges that remain after having developed a control room philosophy is how to utilize it in the daily work situation. It is vital that the document remains as a living document, guiding the continual improvement of the control room in the various life cycle stages.

  7. Design of an SolidWorks-based household substrate cultivation device

    Science.gov (United States)

    Yi, Guo; Yueying, Wang

    2018-03-01

    Rapid urbanization has caused increasingly severe environmental problems and smaller tillable land area. Even worse, negative reports on vegetable production are repeatedly found. In this case, home gardening has become an inexorable trend. To meet demand for vegetable cultivation in the home environment, an SolidWorks-based household substrate cultivation device has been designed. This device is composed of the cultivation tank, upright post, base, irrigation system, supplemental lighting system and control system. The household substrate cultivation device manufactured based on the design results has shown in practice that this device features an esthetic appearance, low cost, automatic irrigation and lighting supplementation, good vegetable growing conditions, full of ornamental value and practicability and thus is suitable for vegetable growing in the home environment. Hence it has a higher promotion value in the home gardening field.

  8. An Analysis on Sensor Locations of the Human Body for Wearable Fall Detection Devices: Principles and Practice

    Directory of Open Access Journals (Sweden)

    Ahmet Turan Özdemir

    2016-07-01

    Full Text Available Wearable devices for fall detection have received attention in academia and industry, because falls are very dangerous, especially for elderly people, and if immediate aid is not provided, it may result in death. However, some predictive devices are not easily worn by elderly people. In this work, a huge dataset, including 2520 tests, is employed to determine the best sensor placement location on the body and to reduce the number of sensor nodes for device ergonomics. During the tests, the volunteer’s movements are recorded with six groups of sensors each with a triaxial (accelerometer, gyroscope and magnetometer sensor, which is placed tightly on different parts of the body with special straps: head, chest, waist, right-wrist, right-thigh and right-ankle. The accuracy of individual sensor groups with their location is investigated with six machine learning techniques, namely the k-nearest neighbor (k-NN classifier, Bayesian decision making (BDM, support vector machines (SVM, least squares method (LSM, dynamic time warping (DTW and artificial neural networks (ANNs. Each technique is applied to single, double, triple, quadruple, quintuple and sextuple sensor configurations. These configurations create 63 different combinations, and for six machine learning techniques, a total of 63 × 6 = 378 combinations is investigated. As a result, the waist region is found to be the most suitable location for sensor placement on the body with 99.96% fall detection sensitivity by using the k-NN classifier, whereas the best sensitivity achieved by the wrist sensor is 97.37%, despite this location being highly preferred for today’s wearable applications.

  9. An Analysis on Sensor Locations of the Human Body for Wearable Fall Detection Devices: Principles and Practice.

    Science.gov (United States)

    Özdemir, Ahmet Turan

    2016-07-25

    Wearable devices for fall detection have received attention in academia and industry, because falls are very dangerous, especially for elderly people, and if immediate aid is not provided, it may result in death. However, some predictive devices are not easily worn by elderly people. In this work, a huge dataset, including 2520 tests, is employed to determine the best sensor placement location on the body and to reduce the number of sensor nodes for device ergonomics. During the tests, the volunteer's movements are recorded with six groups of sensors each with a triaxial (accelerometer, gyroscope and magnetometer) sensor, which is placed tightly on different parts of the body with special straps: head, chest, waist, right-wrist, right-thigh and right-ankle. The accuracy of individual sensor groups with their location is investigated with six machine learning techniques, namely the k-nearest neighbor (k-NN) classifier, Bayesian decision making (BDM), support vector machines (SVM), least squares method (LSM), dynamic time warping (DTW) and artificial neural networks (ANNs). Each technique is applied to single, double, triple, quadruple, quintuple and sextuple sensor configurations. These configurations create 63 different combinations, and for six machine learning techniques, a total of 63 × 6 = 378 combinations is investigated. As a result, the waist region is found to be the most suitable location for sensor placement on the body with 99.96% fall detection sensitivity by using the k-NN classifier, whereas the best sensitivity achieved by the wrist sensor is 97.37%, despite this location being highly preferred for today's wearable applications.

  10. The Principle-Practical Discourse Edge: Elementary Preservice and Mentor Teachers Working Together on Colearning Tasks

    Science.gov (United States)

    Gunckel, Kristin L.; Wood, Marcy B.

    2016-01-01

    A major challenge in preparing elementary teachers to teach inquiry-based science is finding qualified mentor teachers who use research-based approaches to teach science in their classrooms. This situation means preservice teachers often see few connections between the research-based principles for teaching science they learn in university-based…

  11. Children's Conceptions of Work and Play: Exploring an Alternative to the Discounting Principle.

    Science.gov (United States)

    Hennessey, Beth A.; Berger, Andrea R.

    Factors such as an expected reward have been shown to severely undermine individuals' intrinsic interest in a given task. This "overjustification effect," or "discounting principle," has been demonstrated across the life span, except in the case of young children, who have been shown to be incapable of engaging in this…

  12. Teaching Hybrid Principles of Finance to Undergraduate Business Students--Can It Work?

    Science.gov (United States)

    Letterman, Denise

    2008-01-01

    The purpose of this study was to examine the relationship between course design and predictor variables: motivation, satisfaction, and success for students enrolled in the hybrid Principles of Finance course. The participants for this research project were 117 undergraduate students (encompassing 6 semesters) at Robert Morris University,…

  13. Towards quantitative electrostatic potential mapping of working semiconductor devices using off-axis electron holography

    DEFF Research Database (Denmark)

    Yazdi, Sadegh; Kasama, Takeshi; Beleggia, Marco

    2015-01-01

    Pronounced improvements in the understanding of semiconductor device performance are expected if electrostatic potential distributions can be measured quantitatively and reliably under working conditions with sufficient sensitivity and spatial resolution. Here, we employ off-axis electron...... holography to characterize an electrically-biased Si p-. n junction by measuring its electrostatic potential, electric field and charge density distributions under working conditions. A comparison between experimental electron holographic phase images and images obtained using three-dimensional electrostatic...

  14. Tuning the work function of VO_2(1 0 0) surface by Ag adsorption and incorporation: Insights from first-principles calculations

    International Nuclear Information System (INIS)

    Chen, Lanli; Wang, Xiaofang; Shi, Siqi; Cui, Yuanyuan; Luo, Hongjie; Gao, Yanfeng

    2016-01-01

    Graphical abstract: - Highlights: • After adsorption, there is a charge transfer from Ag to VO_2(1 0 0) surface, which thus increases the electron concentration in VO_2 thin film. • Ag adsorption on VO_2(1 0 0) surface process is an exothermic chemical process, and the adsorption system is stable. • The work function can be tuned by Ag adsorption on and incorporation into the VO_2(1 0 0) surface, which in turn regulates the phase transition temperature of VO_2. - Abstract: VO_2 is an attractive material for application to thermochromic optoelectronic devices such as smart windows, and Ag/VO_2 double-layered structure can effectively decrease the phase transition temperature (T_c) of VO_2 thin film, which is very important for practical application of VO_2. Previous works has shown that the decrease in phase transition temperature (T_c) seems to be relevant with the work function of VO_2 in Ag/VO_2 double-layered thin film, although the underlying mechanism of tuning its T_c by Ag incorporation and adsorption on the VO_2(1 0 0) surface has been rarely investigated. Our first-principles calculations reveal that the adsorption of Ag atoms on the VO_2(1 0 0) surface rather than incorporation of Ag exhibits a lower work function, which is ascribed to an integrated effect of charge transfer from Ag to VO_2(1 0 0) surface and enhanced surface dipole moment. The results suggest that the decrease in work function of VO_2 with Ag adsorption favors the reduction in T_c. The current findings are helpful to understand the fundamental mechanism for yielding high-efficiency VO_2-based optoelectronic devices.

  15. Tuning the work function of VO{sub 2}(1 0 0) surface by Ag adsorption and incorporation: Insights from first-principles calculations

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Lanli; Wang, Xiaofang [School of Materials Science and Engineering, Shanghai University, Shanghai 200444 (China); Shi, Siqi, E-mail: sqshi@shu.edu.cn [School of Materials Science and Engineering, Shanghai University, Shanghai 200444 (China); Materials Genome Institute, Shanghai University, Shanghai 200444 (China); Cui, Yuanyuan [School of Materials Science and Engineering, Shanghai University, Shanghai 200444 (China); Luo, Hongjie [School of Materials Science and Engineering, Shanghai University, Shanghai 200444 (China); Materials Genome Institute, Shanghai University, Shanghai 200444 (China); Gao, Yanfeng, E-mail: yfgao@shu.edu.cn [School of Materials Science and Engineering, Shanghai University, Shanghai 200444 (China)

    2016-03-30

    Graphical abstract: - Highlights: • After adsorption, there is a charge transfer from Ag to VO{sub 2}(1 0 0) surface, which thus increases the electron concentration in VO{sub 2} thin film. • Ag adsorption on VO{sub 2}(1 0 0) surface process is an exothermic chemical process, and the adsorption system is stable. • The work function can be tuned by Ag adsorption on and incorporation into the VO{sub 2}(1 0 0) surface, which in turn regulates the phase transition temperature of VO{sub 2}. - Abstract: VO{sub 2} is an attractive material for application to thermochromic optoelectronic devices such as smart windows, and Ag/VO{sub 2} double-layered structure can effectively decrease the phase transition temperature (T{sub c}) of VO{sub 2} thin film, which is very important for practical application of VO{sub 2}. Previous works has shown that the decrease in phase transition temperature (T{sub c}) seems to be relevant with the work function of VO{sub 2} in Ag/VO{sub 2} double-layered thin film, although the underlying mechanism of tuning its T{sub c} by Ag incorporation and adsorption on the VO{sub 2}(1 0 0) surface has been rarely investigated. Our first-principles calculations reveal that the adsorption of Ag atoms on the VO{sub 2}(1 0 0) surface rather than incorporation of Ag exhibits a lower work function, which is ascribed to an integrated effect of charge transfer from Ag to VO{sub 2}(1 0 0) surface and enhanced surface dipole moment. The results suggest that the decrease in work function of VO{sub 2} with Ag adsorption favors the reduction in T{sub c}. The current findings are helpful to understand the fundamental mechanism for yielding high-efficiency VO{sub 2}-based optoelectronic devices.

  16. Gender and other factors associated with the use of hearing protection devices at work

    Directory of Open Access Journals (Sweden)

    Tatiane Costa Meira

    2015-01-01

    Full Text Available OBJECTIVE To analyze whether sociodemographic, occupational, and health-related data are associated with the use of hearing protection devices at work, according to gender.METHODS A cross-sectional study was conducted in 2006, using a random sample of 2,429 workers, aged between 18 and 65 years old, from residential sub-areas in Salvador, BA, Northeastern Brazil. Questionnaires were used to obtain sociodemographic, occupational, and health-related data. Workers who reported that they worked in places where they needed to shout in order to be heard were considered to be exposed to noise. Exposed workers were asked whether they used hearing protection devices, and if so, how frequently. Analyses were conducted according to gender, with estimates made about prevalence of the use of hearing protection devices, prevalence ratios, and their respective 95% confidence intervals.RESULTS Twelve percent (12.3% of study subjects reported that they were exposed to noise while working. Prevalence of the use of hearing protection devices was 59.3% for men and 21.4% for women. Men from higher socioeconomic levels (PR = 1.47; 95%CI 1.14;1.90 and who had previous audiometric tests (PR = 1.47; 95%CI 1.15;1.88 were more likely to use hearing protection devices. For women, greater perceived safety was associated with the use of protection devices (PR = 2.92; 95%CI 1.34;6.34. This perception was specifically related to the presence of supervisors committed to safety (PR = 2.09; 95%CI 1.04;4.21, the existence of clear rules to prevent workplace injuries (PR = 2.81; 95%CI 1.41;5.59, and whether they were informed about workplace safety (PR = 2.42; 95%CI 1.23;4.76.CONCLUSIONS There is a gender bias regarding the use of hearing protection devices that is less favorable to women. The use of such devices among women is positively influenced by their perception of a safe workplace, suggesting that gender should be considered as a factor in hearing conservation programs.

  17. Design Principles of Worked Examples: A Review of the Empirical Studies

    Science.gov (United States)

    Shen, Chun-Yi; Tsai, Hui-Chun

    2009-01-01

    Many researchers investigated the efficacy of using worked examples in classroom instruction and provided evidence in the effectiveness of worked example instruction in mathematics, computer programming, physics, and etc. However, there are limited studies in worked example design. The purpose of this study is to generate the instructional design…

  18. Modeling methods of MEMS micro-speaker with electrostatic working principle

    Science.gov (United States)

    Tumpold, D.; Kaltenbacher, M.; Glacer, C.; Nawaz, M.; Dehé, A.

    2013-05-01

    The market for mobile devices like tablets, laptops or mobile phones is increasing rapidly. Device housings get thinner and energy efficiency is more and more important. Micro-Electro-Mechanical-System (MEMS) loudspeakers, fabricated in complementary metal oxide semiconductor (CMOS) compatible technology merge energy efficient driving technology with cost economical fabrication processes. In most cases, the fabrication of such devices within the design process is a lengthy and costly task. Therefore, the need for computer modeling tools capable of precisely simulating the multi-field interactions is increasing. The accurate modeling of such MEMS devices results in a system of coupled partial differential equations (PDEs) describing the interaction between the electric, mechanical and acoustic field. For the efficient and accurate solution we apply the Finite Element (FE) method. Thereby, we fully take the nonlinear effects into account: electrostatic force, charged moving body (loaded membrane) in an electric field, geometric nonlinearities and mechanical contact during the snap-in case between loaded membrane and stator. To efficiently handle the coupling between the mechanical and acoustic fields, we apply Mortar FE techniques, which allow different grid sizes along the coupling interface. Furthermore, we present a recently developed PML (Perfectly Matched Layer) technique, which allows limiting the acoustic computational domain even in the near field without getting spurious reflections. For computations towards the acoustic far field we us a Kirchhoff Helmholtz integral (e.g, to compute the directivity pattern). We will present simulations of a MEMS speaker system based on a single sided driving mechanism as well as an outlook on MEMS speakers using double stator systems (pull-pull-system), and discuss their efficiency (SPL) and quality (THD) towards the generated acoustic sound.

  19. The Organizational Valuation of Valuation Devices: Putting Lean whiteboard management to work in a hospital department

    Directory of Open Access Journals (Sweden)

    Amalie Martinus Hauge

    2016-12-01

    Full Text Available This paper is about the interplay between multiple modes of valuation. The paper engages with the question of how a valuation device intersects with the working values of an organization. While the many studies of valuation practices have drawn attention to the pervasive effects of valuation devices, only a few studies have taken into account the fact that many spaces, including organizations, are already filled with practices and ideas that constitute what is valuable. Revisiting classical organization theory, this paper shows that organizations comprise multiple, more - or less - integrated modes of valuation. Empirically, the paper draws on an ethnographic study of Lean management at a children's hospital, which is presented through analytical snapshots. The paper suggests that an organizational turn is relevant for valuation studies, as this fi rst allows an analytical expansion to include less 'deviced' valuations, contributes to the ongoing culture vs. device debate offering an alternative to the causal analysis of devices and effects without making the 'ineffable culture' what makes or breaks the causality.

  20. The design of an energy harvesting device for prolonging the working time of DC equipment

    Science.gov (United States)

    Wen, Yayuan; Deng, Huaxia; Zhang, Jin; Yu, Liandong

    2016-01-01

    Energy harvesting (EH) derives from the idea of converting the ambient energy into electric energy, which can solve the problem of DC supply for some electronic equipment. PZT is a typical piezoelectric material of inorganic, which has been developed as EH devices to transfer ambient vibration energy into electric energy. However, these PZT devices require relatively violent excitation, and easy to be fatigue fracture under the resonance condition. In this paper, PVDF, which is a kind of soft piezoelectric polymer, is adopted for developing transducer. The PVDF devices are flexible and have longer life time than PZT devices under the harmonic environment. The EH researches are mainly focused on the development of energy transfer efficiency either by the mechanical structure of transducer or the improvement of circuit. However, the practicality and stability of the EH devices are important in the practical engineering applications. In this paper, a charge amplifier is introduced in the circuit in order to guarantee the stability of the battery charging under small ambient vibration conditions. The model of the mechanical structure of PVDF and the electric performance of circuit are developed. The experimental results and simulation show that the stability of battery charging is improved and the working time of DC equipment is prolonged.

  1. New generation neonatal high frequency ventilators: effect of oscillatory frequency and working principles on performance.

    Science.gov (United States)

    Grazioli, Serge; Karam, Oliver; Rimensberger, Peter C

    2015-03-01

    Several new generation neonatal ventilators that incorporate conventional as well as high frequency ventilation (HFOV) have appeared on the market. Most of them offer the possibility to use HFOV in a volume-targeted mode, despite absence of any preclinical data. With a bench test, we evaluated the performances of 4 new neonatal HFOV devices and compared them to the SensorMedics HFOV device. Expiratory tidal volumes (V(T)) were measured for various ventilator settings and lung characteristics (ie, modifications of compliance and resistance of the system), to mimic several clinical conditions of pre-term and term infants. Increasing the frequency proportionally decreased the V(T) for all the ventilators, although the magnitude of the decrease was highly variable between ventilators. At 15 Hz and a pressure amplitude of 60 cm H2O, the delivered V(T) ranged from 3.5 to 5.9 mL between devices while simulating pre-term infant conditions and from 2.6 to 6.3 mL while simulating term infant conditions. Activating the volume-targeted mode in the 3 machines that offer this mode allowed the V(T) to remain constant over the range of frequencies and with changes of lung mechanical properties, for pre-term infant settings only while targeting a V(T) of 1 mL. These new generation neonatal ventilators were able to deliver adequate V(T) under pre-term infant, but not term infant respiratory system conditions. The clinical relevance of these findings will need to be determined by further studies. Copyright © 2015 by Daedalus Enterprises.

  2. Limited output transcranial electrical stimulation (LOTES-2017): Engineering principles, regulatory statutes, and industry standards for wellness, over-the-counter, or prescription devices with low risk.

    Science.gov (United States)

    Bikson, Marom; Paneri, Bhaskar; Mourdoukoutas, Andoni; Esmaeilpour, Zeinab; Badran, Bashar W; Azzam, Robin; Adair, Devin; Datta, Abhishek; Fang, Xiao Hui; Wingeier, Brett; Chao, Daniel; Alonso-Alonso, Miguel; Lee, Kiwon; Knotkova, Helena; Woods, Adam J; Hagedorn, David; Jeffery, Doug; Giordano, James; Tyler, William J

    regard to output performance and standing regulation, the availability of tDCS, tACS, or tPCS to the public would not introduce risk, provided such devices are responsibly manufactured and legally marketed. In Part 3, we develop voluntary manufacturer guidance for limited output tES that is aligned with current regulatory standards. Based on established medical engineering and scientific principles, we outline a robust and transparent technical framework for ensuring limited output tES devices are designed to minimize risks, while also supporting access and innovation. Alongside applicable medical and government activities, this voluntary industry standard (LOTES-2017) further serves an important role in supporting informed decisions by the public. Copyright © 2017 Elsevier Inc. All rights reserved.

  3. Optimal design of hydraulic excavator working device based on multiple surrogate models

    Directory of Open Access Journals (Sweden)

    Qingying Qiu

    2016-05-01

    Full Text Available The optimal design of hydraulic excavator working device is often characterized by computationally expensive analysis methods such as finite element analysis. Significant difficulties also exist when using a sensitivity-based decomposition approach to such practical engineering problems because explicit mathematical formulas between the objective function and design variables are impossible to formulate. An effective alternative is known as the surrogate model. The purpose of this article is to provide a comparative study on multiple surrogate models, including the response surface methodology, Kriging, radial basis function, and support vector machine, and select the one that best fits the optimization of the working device. In this article, a new modeling strategy based on the combination of the dimension variables between hinge joints and the forces loaded on hinge joints of the working device is proposed. In addition, the extent to which the accuracy of the surrogate models depends on different design variables is presented. The bionic intelligent optimization algorithm is then used to obtain the optimal results, which demonstrate that the maximum stresses calculated by the predicted method and finite element analysis are quite similar, but the efficiency of the former is much higher than that of the latter.

  4. Approaching transdisciplinarity: some historical lines, foundations and applied principles to team work / Aproximações sobre a transdisciplinaridade: algumas linhas históricas, fundamentos e princípios aplicados ao trabalho de equipe

    Directory of Open Access Journals (Sweden)

    Isac Nikos Iribarry

    2003-01-01

    Full Text Available This article aims at presenting some conceptual and practical approaches on transdisciplinarity. At first, all the made approaches will be presented in an alterned way with the theorical presentation of themes related to transdisciplinarity. Some practical illustrations of those concepts will be presented as well. The concept of disciplinarity and its derivations – multidisciplinarity, pluridisciplinarity and transdisciplinarity – are examined in their differences, as well as in their consequences for establishing a relationship between different areas. Following that, some historical origins and foundations of transdisciplinarity will be presented. In the last part of this paper, the practical principles of team work in a case of transdisciplinarity will be discussed. Those principles are organized from the work carried out by the team work, the generation of new devices to foster familiarising of professionals from different areas, the readability and sharing of discourses, as well as horizontal decision making.

  5. Tethered to work: A family systems approach linking mobile device use to turnover intentions.

    Science.gov (United States)

    Ferguson, Merideth; Carlson, Dawn; Boswell, Wendy; Whitten, Dwayne; Butts, Marcus M; Kacmar, K Michele Micki

    2016-04-01

    We examined the use of a mobile device for work during family time (mWork) to determine the role that it plays in employee turnover intentions. Using a sample of 344 job incumbents and their spouses, we propose a family systems model of turnover and examine 2 paths through which we expect mWork to relate to turnover intentions: the job incumbent and the spouse. From the job incumbent, we found that the job incumbent's mWork associated with greater work-to-family conflict and burnout, and lower organizational commitment. From the spouse, we found that incumbent mWork and greater work-to-family conflict associated with increased resentment by the spouse and lower spousal commitment to the job incumbent's organization. Both of these paths played a role in predicting job incumbent turnover intentions. We discuss implications and opportunities for future research on mWork for integrating work and family into employee turnover intentions. (c) 2016 APA, all rights reserved).

  6. Ergonomics principles to design clothing work for electrical workers in Colombia.

    Science.gov (United States)

    Castillo, Juan; Cubillos, A

    2012-01-01

    The recent development of the Colombian legislation, have been identified the need to develop protective clothing to work according to specifications from the work done and in compliance with international standards. These involve the development and design of new strategies and measures for work clothing design. In this study we analyzes the activities of the workers in the electrical sector, the method analyzes the risks activity data in various activities, that activities include power generation plants, local facilities, industrial facilities and maintenance of urban and rural networks. The analyses method is focused on ergonomic approach, risk analysis is done, we evaluate the role of security expert and we use a design algorithm developed for this purpose. The result of this study is the identification of constraints and variables that contribute to the development of a model of analysis that leads to the development the work protective clothes.

  7. Educational value of pocket-sized ultrasound devices to improve understanding of ultrasound examination principles and sonographic anatomy for medical student.

    Directory of Open Access Journals (Sweden)

    Eun Young Kim

    Full Text Available Medical students must understand the principles of ultrasonography (US, because US examinations are an important component of patient care in clinical practice. Pocket-sized ultrasound devices have the benefits of accessibility and ease of use. The primary objective of the present study was to evaluate the educational value of these devices in terms of improving medical student interest and understanding of US and sonographic anatomy.We added a US training program comprised of a self-study learning module and a hands-on training session to a two-week block curriculum of medical imaging for first year medical students (n = 40. Multiple pocket-sized US devices were used on a small-group basis during a single afternoon. Students were asked to complete a questionnaire before and after the US training session; these two questionnaires contained 6 and 10 questions, respectively, which were rated by students using a five-point Likert scale. In addition, understanding of sonographic anatomy was tested before and after the training program.Forty students completed the two questionnaires and the anatomy-related tests. Students found the program educationally valuable (4.37 ± 0.54 of 5 and reported that US practice was useful for improving their understanding of the principles of US examinations (4.23 ± 0.66 of 5 and sonographic anatomy (4.40 ± 0.55 of 5. Overall confidence at performing US examinations and understanding of sonographic anatomy were significantly increased after US training (increased overall confidence score, 1.87 ± 0.91 and improvement in sonographic anatomy score, 6.55 ± 1.55, p values < 0.001.US training using pocket-sized ultrasound devices was found to be educationally valuable for medical students in terms of improving understanding of US principles and familiarizing students with sonographic anatomy.

  8. Reach–to-grasp movements in macaca fascicularis monkeys: the Isochrony Principle at work

    Directory of Open Access Journals (Sweden)

    Luisa eSartori

    2013-03-01

    Full Text Available Humans show a spontaneous tendency to increase the velocity of their movements depending on the linear extent of their trajectory in order to keep execution time approximately constant. Termed the isochrony principle, this compensatory mechanism refers to the observation that the velocity of voluntary movements increases proportionally with their linear extension. Although there is a wealth of psychophysical data regarding isochrony in humans, there is none regarding non-human primates. The present study attempts to fill that gap by investigating reach-to-grasp movement kinematics in free-ranging macaques. Video footage of monkeys grasping objects located at different distances was analyzed frame-by-frame using digitalization techniques. The amplitude of arm peak velocity was found to be correlated with the distance to be covered, and total movement duration remained invariant although target distances varied. Like in humans, the ‘isochrony principle’ seems to be operative as there is a gearing down/up of movement velocity that is proportional to the distance to be covered in order to allow for a relatively constant movement duration. Based on a centrally generated temporal template, this mode of motor programming could be functional in macaques given the high speed and great instability of posture and joint kinematics characterizing their actions. The data presented here take research in the field of comparative motor control a step forward as they are based on precise measurements of spontaneous grasping movements by animals living/acting in their natural environment.

  9. Reach-to-grasp movements in Macaca fascicularis monkeys: the Isochrony Principle at work

    Science.gov (United States)

    Sartori, Luisa; Camperio-Ciani, Andrea; Bulgheroni, Maria; Castiello, Umberto

    2013-01-01

    Humans show a spontaneous tendency to increase the velocity of their movements depending on the linear extent of their trajectory in order to keep execution time approximately constant. Termed the isochrony principle, this compensatory mechanism refers to the observation that the velocity of voluntary movements increases proportionally with their linear extension. Although there is a wealth of psychophysical data regarding isochrony in humans, there is none regarding non-human primates. The present study attempts to fill that gap by investigating reach-to-grasp movement kinematics in free-ranging macaques. Video footage of monkeys grasping objects located at different distances was analyzed frame-by-frame using digitalization techniques. The amplitude of arm peak velocity was found to be correlated with the distance to be covered, and total movement duration remained invariant although target distances varied. Like in humans, the “isochrony principle” seems to be operative as there is a gearing down/up of movement velocity that is proportional to the distance to be covered in order to allow for a relatively constant movement duration. Based on a centrally generated temporal template, this mode of motor programming could be functional in macaques given the high speed and great instability of posture and joint kinematics characterizing their actions. The data presented here take research in the field of comparative motor control a step forward as they are based on precise measurements of spontaneous grasping movements by animals living/acting in their natural environment. PMID:23658547

  10. The Integrative Principle: Higher Education and Work-Based Learning in the UK.

    Science.gov (United States)

    Saunders, Murray

    1995-01-01

    The United Kingdom's developing policy to integrate higher education curriculum and the demands of the workplace is explored, particularly in the context of undergraduate and graduate programs based on learning within the workplace. The policy itself, the relationship between work-based learning and conventional college instruction, and validation…

  11. Decomposition principles applied to the dynamic production and work-force scheduling problem

    NARCIS (Netherlands)

    Aardal, K.I.; Ari, A.

    1987-01-01

    One of the most important problems in the production and inventory planning field, is the scheduling of production and work force in a dynamic environment. Although this problem can be formulated as a linear program, it is often quite difficult to solve directly, due to its large scale. Instead, it

  12. Fuel cell technology for classroom instruction. Basic principles, experiments, work sheets. 2. ed.

    Energy Technology Data Exchange (ETDEWEB)

    Voigt, Cornelia; Hoeller, Stefan; Kueter, Uwe

    2009-07-01

    This book provides a clear introduction and overview to fuel cell technology and its associated subject areas. Examples of experiments using solar cells, electrolysis and fuel cells convey the knowledge for forthcoming tests in an understandable manner. The preparation of classroom experiments is made considerably easier for the teacher thanks to the experiment work sheets. These contain the necessary information concerning the material, set-up and execution of the experiment, and questions for evaluation purposes. Online-Shop The training documents and student work sheets combine the basic knowledge, questions and answers, and are ideal for copying. A comprehensive glossary at the end of the book explains all the important technical terms. (orig.)

  13. Development of methodological principles for organization of students’ independent work in the e-learning system

    Directory of Open Access Journals (Sweden)

    Олександр Іванович Пушкар

    2016-10-01

    Full Text Available The concept of organization of professional competence formation of students’ independent work in e-learning is proposed in the article. Implementation of the proposed model of competence formation in e-learning is done on the example of multimedia complex for discipline "Processes of publishing and printing". Selection of the most important components for each competence is made on the basis of Saaty method

  14. Field testing, comparison, and discussion of five aeolian sand transport measuring devices operating on different measuring principles

    NARCIS (Netherlands)

    Goossens, Dirk; Nolet, Corjan; Etyemezian, Vicken; Duarte-campos, Leonardo; Bakker, Gerben; Riksen, Michel

    2018-01-01

    Five types of sediment samplers designed to measure aeolian sand transport were tested during a wind erosion event on the Sand Motor, an area on the west coast of the Netherlands prone to severe wind erosion. Each of the samplers operates on a different principle. The MWAC (Modified Wilson And

  15. Formulation of basic principles for innovative combustion and work processes; Projekt Erarbeitung von Grundlagen fuer innovative Brennverfahren und motorische Arbeitsprozesse

    Energy Technology Data Exchange (ETDEWEB)

    Barroso, G.; Escher, A.; Boulouchos, K. [Eidgenoessische Technische Hochschule (ETH), Labor fuer Aerothermochemie und Verbrennungssysteme IET, ETH-Zentrum, Zuerich (Switzerland)

    2004-07-01

    This yearly report for 2004 presents a review of work being done on behalf of the Swiss Federal Office of Energy (SFOE) at the Laboratory for Aero-thermochemistry and Combustion Systems at the Federal Institute of Technology ETH in Zurich, Switzerland, on the development of basic principles for innovative combustion and work processes. A successfully-used approach involving reaction-path analysis, heat-release analysis and the optimisation of bio-inspired algorithms is discussed. Experimental investigations made using the high-pressure, high-temperature cell at the ETH are described and initial results are discussed. The commissioning of a one-stroke Rapid Compression Machine EHT and the results of initial experiments are presented.

  16. Engineering the work function of buckled boron α-sheet by lithium adsorption: a first-principles investigation.

    Science.gov (United States)

    Zheng, Bing; Yu, Hai-tao; Xie, Ying; Lian, Yong-fu

    2014-11-26

    First-principles density functional theory calculations were performed to study the effect of Li adsorption on the structural and electronic properties, particularly the work function, of boron α-sheet. The calculated binding energies indicated that boron α-sheet could be well stabilized by the adsorption of Li atoms. Furthermore, the work functions of Li-adsorbed boron α-sheets were observed to decrease drastically with increasing Li coverage. The work functions are lower than that of Mg and even, for some of them, lower than that of Ca, indicating a considerable potential application of Li-adsorbed boron α-sheets as field-emission and electrode materials. Based on the calculated geometric and electronic structures, we discuss in details some possible aspects affecting the work function. The Li coverage dependence of the work functions of Li-adsorbed boron α-sheets was further confirmed by electrostatic potential analyses. The relationship between the work function variation and the Fermi and vacuum energy level shifts was also discussed, and we observed that the variation of the work function is primarily associated with the shift of the Fermi energy level. It is the surface dipole formed by the interaction between adatoms and substrate that should be responsible for the observed variation of the work function, whereas the increasing negative charge and rumpling for boron α-sheet only play minor roles. Additionally, the effect of Li adatoms on the work function of boron α-sheet was confirmed to be much stronger than that of graphene or a graphene double layer.

  17. Engineering the work function of armchair graphene nanoribbons using strain and functional species: a first principles study

    International Nuclear Information System (INIS)

    Peng Xihong; Tang Fu; Copple, Andrew

    2012-01-01

    First principles density functional theory calculations were performed to study the effects of strain, edge passivation, and surface functional species on the structural and electronic properties of armchair graphene nanoribbons (AGNRs), with a particular focus on the work function. The work function was found to increase with uniaxial tensile strain and decrease with compression. The variation of the work function under strain is primarily due to the shift of the Fermi energy with strain. In addition, the relationship between the work function variation and the core level shift with strain is discussed. Distinct trends of the core level shift under tensile and compressive strain were discovered. For AGNRs with the edge carbon atoms passivated by oxygen, the work function is higher than for nanoribbons with the edge passivated by hydrogen under a moderate strain. The difference between the work functions in these two edge passivations is enlarged (reduced) under a sufficient tensile (compressive) strain. This has been correlated to a direct-indirect bandgap transition for tensile strains of about 4% and to a structural transformation for large compressive strains at about - 12%. Furthermore, the effect of the surface species decoration, such as H, F, or OH with different covering density, was investigated. It was found that the work function varies with the type and coverage of surface functional species. Decoration with F and OH increases the work function while H decreases it. The surface functional species were decorated on either one side or both sides of AGNRs. The difference in the work functions between one-sided and two-sided decorations was found to be relatively small, which may suggest an introduced surface dipole plays a minor role. (paper)

  18. THE GOSPEL TEXT IN DOSTOYEVSKY'S WORKS IN THE LIGHT OF GENERAL FORM-PRODUCING PRINCIPLES

    Directory of Open Access Journals (Sweden)

    Sergey Viktorovich Syzranov

    2014-11-01

    Full Text Available The artistic functions of the Gospel text in Dostoyevsky’s Th e Double, Notes from the Underground and The Idiot" are examined in the light of Losev’s aesthetic theory. The focus is on the fact that the categories of Prime-image, Myth, Name take important place both in Losev’s aesthetics and Dostoyevsky’s poetics. Dynamics of the form-producing process is described by Losev as a dialectical way of the movement of Image towards Prime-image, its purpose is their complete equation. In Dostoyevsky’s works this dynamics is already apparent at onomapoetics: hero’s name actualizes dialectical relations between the character and its ideal prototype. These relations are materialized in diverse interactions of the artistic and the Gospel texts. Gospel text is actively involved in the process of formation; it carries interpenetration of architectonics and of composition aspects of artistic form, organizes artistic teleology of the writer’s works. Teleological direction of artistic myth created by Dostoyevsky embodies teleology of Absolute Myth of Sacred history.

  19. Using Technology in Social Work Practice: The mDad (Mobile Device Assisted Dad Case Study

    Directory of Open Access Journals (Sweden)

    Shawna J. Lee

    2015-07-01

    Full Text Available Mobile technology presents an exciting opportunity for social workers to reach populations that are typically underserved by interventions and services. We present one application of technology that is particularly relevant to social work practice. The mDad (Mobile Device Assisted Dad app was developed to augment existing social work practices by providing a father-friendly tool to help new fathers learn about and engage with their infants and toddlers. We discuss the process of developing the app content and conducting usability testing of the mDad app. We conclude with a discussion of the lessons learned from the mDad project, and the challenges of implementation and dissemination of technology-based interventions in community contexts.

  20. Design principle for efficient charge separation at the donor-acceptor interface for high performance organic solar cell device

    Science.gov (United States)

    Nie, Wanyi; Gupta, Gautam; Crone, Brian; Wang, Hsing-Lin; Mohite, Aditya; MPA-11 Material synthesis and integrated device Team; MPA-chemistry Team

    2014-03-01

    The performance of donor (D) /acceptor (A) structure based organic electronic devices, such as solar cell, light emitting devices etc., relays on the charge transfer process at the interface dramatically. In organic solar cell, the photo-induced electron-hole pair is tightly bonded and will form a charge transfer (CT) state at the D/A interface after dissociation. There is a large chance for them to recombine through CT state and thus is a major loss that limit the overall performance. Here, we report three different strategies that allow us to completely suppress the exciplex (or charge transfer state) recombination between any D/A system. We observe that the photocurrent increases by 300% and the power conversion efficiency increases by 4-5 times simply by inserting a spacer layer in the form of an a) insulator b) Oliogomer or using a c) heavy atom at the donor-acceptor interface in a P3HT/C60 bilayer device. By using those different functional mono layers, we successfully suppressed the exciplex recombination in evidence of increased photocurrent and open circuit voltage. Moreover, these strategies are applicable universally to any donor-acceptor interface. And we demonstrated such strategies in a bulk-heterojunction device which improved the power conversion efficiency from 3.5% up to 4.6%.

  1. Contralateral delay activity tracks the influence of Gestalt grouping principles on active visual working memory representations.

    Science.gov (United States)

    Peterson, Dwight J; Gözenman, Filiz; Arciniega, Hector; Berryhill, Marian E

    2015-10-01

    Recent studies have demonstrated that factors influencing perception, such as Gestalt grouping cues, can influence the storage of information in visual working memory (VWM). In some cases, stationary cues, such as stimulus similarity, lead to superior VWM performance. However, the neural correlates underlying these benefits to VWM performance remain unclear. One neural index, the contralateral delay activity (CDA), is an event-related potential that shows increased amplitude according to the number of items held in VWM and asymptotes at an individual's VWM capacity limit. Here, we applied the CDA to determine whether previously reported behavioral benefits supplied by similarity, proximity, and uniform connectedness were reflected as a neural savings such that the CDA amplitude was reduced when these cues were present. We implemented VWM change-detection tasks with arrays including similarity and proximity (Experiment 1); uniform connectedness (Experiments 2a and 2b); and similarity/proximity and uniform connectedness (Experiment 3). The results indicated that when there was a behavioral benefit to VWM, this was echoed by a reduction in CDA amplitude, which suggests more efficient processing. However, not all perceptual grouping cues provided a VWM benefit in the same measure (e.g., accuracy) or of the same magnitude. We also found unexpected interactions between cues. We observed a mixed bag of effects, suggesting that these powerful perceptual grouping benefits are not as predictable in VWM. The current findings indicate that when grouping cues produce behavioral benefits, there is a parallel reduction in the neural resources required to maintain grouped items within VWM.

  2. Elimination of nuclear device in tunnel 108K. Safety of works and ecological cleanness

    International Nuclear Information System (INIS)

    Andrusenko, B. A.; Kuznetsov, Yu. I.; Litvinov, B. V.; Nechai, V. Z.; Smirnov, V. Z.; Zherbina, A.N.; Kozlov, E. P.; Matuschenko, A. M.; Zhantikin, T. M.; Smagulov, S. G.; Tukhvatulin, Sh. T.

    1997-01-01

    This paper represents the Russian and Kazakhstan specialists activity on ND elimination located in tunnel 108K at the former Semipalatinsk test site. The completed works system which is a great realized ecologically clean project for the interests of the solution of ecological problems and environment protection at the Semipalatinsk test site, is considered successively in this paper. The special attention is paid to the measures the application of which allowed to provide the absolute observance of ecological cleanness and operation safety - expertise of radiation and ecological project safety, joint radio-ecological control before and after the ND elimination, procedures of the end ND box opening, visualization and decision on the ND state, and the coordinated physical measuring as well confirming the fact of the charge BB acting and ND elimination. The paper gives the detailed comments on the realized project decisions for the stemming complex erection the use of which provided the safe disposal and sealing of chemical BB explosion products and atomized fission materials in the end box and allowed to prevent their release into the day surface. While erecting the stemming complex the new materials of stemming and stemming work technology of principle were used. The basic experiments outcomes and argumentation of the obtained experience use during the joint work while preparing and realizing the further International Agreements on the former Semipalatinsk test site, are presented in the paper conclusion

  3. The death instinct and the mental dimension beyond the pleasure principle in the works of Spielrein and Freud.

    Science.gov (United States)

    Caropreso, Fátima

    2017-12-01

    In 'Destruction as Cause of Come-into-being', Spielrein argues for the need of postulating the existence of a death instinct in mental functioning. The idea that she thus anticipated the concept of death instinct Freud introduced in 1920 is often found in psychoanalytic literature. But the specific meaning of Spielrein's hypothesis is seldom discussed, as well as the extent to which she anticipated Freud's concept. In fact, there are important differences between their views. Besides, a closer analysis of Spielrein's text reveals other ideas that come close to fundamental aspects of Freud's theories from 1920 onwards, particularly the assumption of a more primordial mental functioning than the one regulated by the pleasure principle. But also here there are important differences between the views sustained by both authors. With this in view, the objective of this paper is firstly to discuss some hypotheses formulated by Spielrein in her 1912 work in order to elucidate her concept of death instinct as well as her hypothesis of the existence of a more primitive mental functioning than the one governed by the pleasure principle. Next, the question of the possible similarities and differences with regard to Freud's concepts is also addressed. Copyright © 2017 Institute of Psychoanalysis.

  4. Towards an Artificial Phonological Loop: An Assistive Device for Working Memory and Attentional Control

    Directory of Open Access Journals (Sweden)

    D. Bogen

    2006-01-01

    Full Text Available We describe the initial development of an artificial phonological loop (APL, a new technology to assist individuals with impairment of the working memory system. The phonological loop, along with the visuospatial sketchpad, is one of the two slave short-term memory subsystems that comprise working memory, a cognitive function closely associated with the control of attention. In the phonological loop, phonological (speech information lasting for 1–2 second is maintained active by repetitive, subvocal (silent speech rehearsal. Deficits in working memory, specifically in the phonological loop, occur in many disorders, including attention-deficit disorder and Alzheimer’s disease. In these disorders, it appears that the ability for phonological rehearsal is intact, but the regulation or triggering of the rehearsal process is inadequate, thus causing the contents of working memory to be lost. The purpose, then, of the APL is to facilitate the phonological loop by artificially extending the duration of phonological rehearsals. The APL mimics the natural phonological loop by providing audible vocal echoes to take the place of subvocal rehearsals. In this system, the user talks to him/herself in short (1–2 second phrases; the device records these phrases, stores them in electronic memory, and then repeats— i.e., echoes—the phrases multiple times over an extended period. Two versions of this device have been developed: the Echo-APL and the Rearticulation-APL. In the Echo-APL, only echoing is involved. In the Rearticulation-APL, however, the user re-vocalizes (rearticulates the phrase in response to an audible cue. The device repeats the cue until it detects (hears the re-vocalization. Future research and development of the APL will require extensive testing and careful evaluation of possible echo-schedules: the predefined program controlling inter-echo time intervals and echo-amplitude (echo loudness. The APL essentially exteriorizes the silent

  5. A literature review of the effects of computer input device design on biomechanical loading and musculoskeletal outcomes during computer work.

    Science.gov (United States)

    Bruno Garza, J L; Young, J G

    2015-01-01

    Extended use of conventional computer input devices is associated with negative musculoskeletal outcomes. While many alternative designs have been proposed, it is unclear whether these devices reduce biomechanical loading and musculoskeletal outcomes. To review studies describing and evaluating the biomechanical loading and musculoskeletal outcomes associated with conventional and alternative input devices. Included studies evaluated biomechanical loading and/or musculoskeletal outcomes of users' distal or proximal upper extremity regions associated with the operation of alternative input devices (pointing devices, mice, other devices) that could be used in a desktop personal computing environment during typical office work. Some alternative pointing device designs (e.g. rollerbar) were consistently associated with decreased biomechanical loading while other designs had inconsistent results across studies. Most alternative keyboards evaluated in the literature reduce biomechanical loading and musculoskeletal outcomes. Studies of other input devices (e.g. touchscreen and gestural controls) were rare, however, those reported to date indicate that these devices are currently unsuitable as replacements for traditional devices. Alternative input devices that reduce biomechanical loading may make better choices for preventing or alleviating musculoskeletal outcomes during computer use, however, it is unclear whether many existing designs are effective.

  6. Engineering challenges encountered in the design of the ELMO BUMPY TORUS proof-of-principle fusion device

    International Nuclear Information System (INIS)

    Dillow, C.F.; Imster, H.F.

    1982-01-01

    This paper first provides a summary of the history and current status of the Elmo Bumpy Torus (EBT) fusion concept. A brief description of the EBT-P is then provided in which the many unique features of this fusion device are highlighted. This description will provide the technical background for the following discussions of some of the more challenging mechanical engineering problems encountered to date in the evolution of the EBT-P design. The problems discussed are: optimization of the device primary structure design, optimization of the superconducting magnet x-ray shield design, design of the liquid helium supply and distribution system, and selection of high vacuum seals and pumps and their protection from the high power microwave environment. The common challenge in each of these design issues was to assure adequate performance at minimum cost

  7. First-principles study of structural and work function properties for nitrogen-doped single-walled carbon nanotubes

    International Nuclear Information System (INIS)

    Shao, Xiji; Li, Detian; Cai, Jianqiu; Luo, Haijun; Dong, Changkun

    2016-01-01

    Graphical abstract: - Highlights: • Substitutional nitrogen atom doping in capped (5, 5) SWNT is investigated. • Serious defects appear from breaks of C−N bonds with N contents of above 23.3 at.%. • Work function drops after N doping and may reach 4.1 eV. - Abstract: The structural and electronic properties of the capped (5, 5) single-walled carbon nanotube (SWNT), including the structural stability, the work function, and the charge transfer performance, are investigated for the substitutional nitrogen atom doping under different concentrations by first-principles density functional theory. The geometrical structure keeps almost intact with single or two N atom doping, while C−N bonds may break up with serious defects for N concentrations of 23.3 at.% and above. The SWNT remains metallic and the work function drops after doping due to the upward shift of Fermi level, leading to the increase of the electrical conductivity. N doping enhances the oxygen reduction activity stronger than N adsorption because of higher charge transfers.

  8. Final report of the NRC-Agreement State Working Group to evaluate control and accountability of licensed devices

    International Nuclear Information System (INIS)

    1996-10-01

    US NRC staff acknowledged that licensees were having problems maintaining control over and accountability for devices containing radioactive material. In June 1995, NRC approved the staff's suggestion to form a joint NRC-Agreement State Working Group to evaluate the problem and propose solutions. The staff indicated that the Working Group was necessary to address the concerns from a national perspective, allow for a broad level of Agreement State input, and to reflect their experience. Agreement State participation in the process was essential since some Agreement States have implemented effective programs for oversight of device users. This report includes the 5 recommendations proposed by the Working Group to increase regulatory oversight, increase control and accountability of devices, ensure proper disposal, and ensure disposal of orphaned devices. Specifically, the Working Group recommends that: (1) NRC and Agreement States increase regulatory oversight for users of certain devices; (2) NRC and Agreement State impose penalties on persons losing devices; (3) NRC and Agreement States ensure proper disposal of orphaned devices; (4) NRC encourage States to implement similar oversight programs for users of Naturally-Occurring or Accelerator- Produced Material; and (5) NRC encourage non-licensed stakeholders to take appropriate actions, such as instituting programs for material identification

  9. Final report of the NRC-Agreement State Working Group to evaluate control and accountability of licensed devices

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    US NRC staff acknowledged that licensees were having problems maintaining control over and accountability for devices containing radioactive material. In June 1995, NRC approved the staff`s suggestion to form a joint NRC-Agreement State Working Group to evaluate the problem and propose solutions. The staff indicated that the Working Group was necessary to address the concerns from a national perspective, allow for a broad level of Agreement State input, and to reflect their experience. Agreement State participation in the process was essential since some Agreement States have implemented effective programs for oversight of device users. This report includes the 5 recommendations proposed by the Working Group to increase regulatory oversight, increase control and accountability of devices, ensure proper disposal, and ensure disposal of orphaned devices. Specifically, the Working Group recommends that: (1) NRC and Agreement States increase regulatory oversight for users of certain devices; (2) NRC and Agreement State impose penalties on persons losing devices; (3) NRC and Agreement States ensure proper disposal of orphaned devices; (4) NRC encourage States to implement similar oversight programs for users of Naturally-Occurring or Accelerator- Produced Material; and (5) NRC encourage non-licensed stakeholders to take appropriate actions, such as instituting programs for material identification.

  10. Working gas effects on the X-ray emission of a plasma focus device

    Energy Technology Data Exchange (ETDEWEB)

    Cengher, M; Presura, R; Zoita, V [Inst. of Physics and Technology of Radiation Devices, Bucharest (Romania)

    1997-12-31

    Experiments on the plasma focus device IPF-2/20 operating with argon, neon and mixtures of argon with deuterium were performed and some X-ray emission parameters measured. The time evolution of the X-ray emission and dependence of the X-ray yield on the working gas composition was analyzed. The softer X radiation was measured with time resolution in the energy bands from 4 to 40 keV, and the hard X-rays for energies above 200 keV. In deuterium-argon mixtures the soft X-ray yield increases both with pressure (for the same ratio of argon) and with the quantity of argon added to deuterium at the same total pressure. For argon or neon the hard X-ray yield is lower than for deuterium-heavy gas mixtures. The softer X-ray yield decreases with pressure both for neon and for argon. (author). 4 figs., 5 refs.

  11. Invited Article: Acousto-optic finite-difference frequency-domain algorithm for first-principles simulations of on-chip acousto-optic devices

    Directory of Open Access Journals (Sweden)

    Yu Shi

    2017-02-01

    Full Text Available We introduce a finite-difference frequency-domain algorithm for coupled acousto-optic simulations. First-principles acousto-optic simulation in time domain has been challenging due to the fact that the acoustic and optical frequencies differ by many orders of magnitude. We bypass this difficulty by formulating the interactions between the optical and acoustic waves rigorously as a system of coupled nonlinear equations in frequency domain. This approach is particularly suited for on-chip devices that are based on a variety of acousto-optic interactions such as the stimulated Brillouin scattering. We validate our algorithm by simulating a stimulated Brillouin scattering process in a suspended waveguide structure and find excellent agreement with coupled-mode theory. We further provide an example of a simulation for a compact on-chip resonator device that greatly enhances the effect of stimulated Brillouin scattering. Our algorithm should facilitate the design of nanophotonic on-chip devices for the harnessing of photon-phonon interactions.

  12. ANTHROPOLOGICAL PRINCIPLES OF THE PHILOSOPHY OF RELIGION IN THE EARLY WORK OF NIKOLAY BERDYAEV (1900–1910

    Directory of Open Access Journals (Sweden)

    Viktoriya Boldareva

    2013-04-01

    Full Text Available This article deals with the anthropological principles of the philosophy of religion which served as the basis of the early thought of N. A. Berdyaev. The author’s aim is to investigate this little known period in the work of Berdyaev during the decade from 1900 to 1910. Several problems are resolved through a study of the source material examined by the author of this article: 1 The principle phases of the evolution of Berdyaev’s thought are traced which brought the philosopher from Marxism to becoming a follower of Kant, and from idealistic metaphysics to religious philosophy; 2 This early period is examined to determine its importance in the formation of Berdyaev as an independent and original thinker; 3 The problem of the rapport between universality and individuality is studied in all of its aspects (both social and aesthetic in the early thought of Berdyaev as well as Berdyaev’s understanding of the chuvstvo lichnosti (sense of personality?. As a result we can demarcate several phases of the thought of Berdyaev during his early period which differ from one another in their thematic outlook: an enthusiasm for Marxism and later Neo-Kantism, a transition to spiritualism, a conversion to a new religious consciousness, and a finally a more moderate view of all these perceptions. The author concludes that it is necessary to question the accepted theses of the relevant literature which irrevocably claims that Berdyaev rejected Orthodox asceticism and was thus the creator of an anthropocentric and amoral philosophy

  13. Traceable working standards with SI units of radiance for characterizing the measurement performance of investigational clinical NIRF imaging devices

    Science.gov (United States)

    Zhu, Banghe; Rasmussen, John C.; Litorja, Maritoni; Sevick-Muraca, Eva M.

    2017-03-01

    All medical devices for Food and Drug market approval require specifications of performance based upon International System of Units (SI) or units derived from SI for reasons of traceability. Recently, near-infrared fluorescence (NIRF) imaging devices of a variety of designs have emerged on the market and in investigational clinical studies. Yet the design of devices used in the clinical studies vary widely, suggesting variable device performance. Device performance depends upon optimal excitation of NIRF imaging agents, rejection of backscattered excitation and ambient light, and selective collection of fluorescence emanating from the fluorophore. There remains no traceable working standards with SI units of radiance to enable prediction that a given molecular imaging agent can be detected in humans by a given NIRF imaging device. Furthermore, as technologies evolve and as NIRF imaging device components change, there remains no standardized means to track device improvements over time and establish clinical performance without involving clinical trials, often costly. In this study, we deployed a methodology to calibrate luminescent radiance of a stable, solid phantom in SI units of mW/cm2/sr for characterizing the measurement performance of ICCD and IsCMOS camera based NIRF imaging devices, such as signal-to-noise ratio (SNR) and contrast. The methodology allowed determination of superior SNR of the ICCD over the IsCMOS system; comparable contrast of ICCD and IsCMOS depending upon binning strategies.

  14. Development of an improved wearable device for core body temperature monitoring based on the dual heat flux principle.

    Science.gov (United States)

    Feng, Jingjie; Zhou, Congcong; He, Cheng; Li, Yuan; Ye, Xuesong

    2017-04-01

    In this paper, a miniaturized wearable core body temperature (CBT) monitoring system based on the dual heat flux (DHF) principle was developed. By interspersing calcium carbonate powder in PolyDimethylsiloxane (PDMS), a reformative heat transfer medium was produced to reduce the thermal equilibrium time. Besides, a least mean square (LMS) algorithm based active noise cancellation (ANC) method was adopted to diminish the impact of ambient temperature fluctuations. Theoretical analyses, finite element simulation, experiments on a hot plate and human volunteers were performed. The results showed that the proposed system had the advantages of small size, reduced initial time (~23.5 min), and good immunity to fluctuations of the air temperature. For the range of 37-41 °C on the hot plate, the error compared with a Fluke high accuracy thermometer was 0.08  ±  0.20 °C. In the human experiments, the measured temperature in the rest trial (34 subjects) had a difference of 0.13  ±  0.22 °C compared with sublingual temperature, while a significant increase of 1.36  ±  0.44 °C from rest to jogging was found in the exercise trial (30 subjects). This system has the potential for reliable continuous CBT measurement in rest and can reflect CBT variations during exercise.

  15. Measurement of hearing protection devices performance in the workplace during full-shift working operations.

    Science.gov (United States)

    Nélisse, Hugues; Gaudreau, Marc-André; Boutin, Jérôme; Voix, Jérémie; Laville, Frédéric

    2012-03-01

    The effectiveness of hearing protection devices (HPDs), when used in workplace conditions, has been shown over the years to be usually lower than the labeled values obtained under well-controlled laboratory conditions. Causes for such discrepancies have been listed and discussed by many authors. This study is an attempt to understand the issues in greater details and quantify some of these factors by looking at the performance of hearing protectors as a function of time during full work shift conditions. A non-invasive field microphone in the real ear (F-MIRE)-based method has been developed for measuring the effectiveness of different HPDs as a function of time in the workplace. Details of the test procedures, the equipment used, and the post-processing operations are presented and discussed. The methodology was developed in such a way that a complete time and frequency representation are possible. The system was used on a total of 24 workers in eight different companies. Work shifts of up to 9-h long were recorded. Various types of earmuffs and one type of molded earplugs were tested. Attenuation data reported as a function of time showed, for most workers tested, considerable fluctuations over entire work shift periods. Parts of these fluctuations are attributed to variations in the low-frequency content in the noise (in particular for earmuffs) as well as poor insertion and/or fitting of earplugs. Lower performances than laboratory-based ones were once again observed for most cases tested but also, important left and right ear differences were obtained for many individuals. When reported as a function of frequency, the attenuation results suggested that the few approximations used to relate the measurements to subjective real-ear-attenuation-at-threshold (REAT) data were realistic. The use of individualized attenuation data and performance ratings for HPDs as well as a good knowledge of the ambient noise in the workplace are key ingredients when evaluating the

  16. Development of Measurement Device of Working Radius of Crane Based on Single CCD Camera and Laser Range Finder

    Science.gov (United States)

    Nara, Shunsuke; Takahashi, Satoru

    In this paper, what we want to do is to develop an observation device to measure the working radius of a crane truck. The device has a single CCD camera, a laser range finder and two AC servo motors. First, in order to measure the working radius, we need to consider algorithm of a crane hook recognition. Then, we attach the cross mark on the crane hook. Namely, instead of the crane hook, we try to recognize the cross mark. Further, for the observation device, we construct PI control system with an extended Kalman filter to track the moving cross mark. Through experiments, we show the usefulness of our device including new control system of mark tracking.

  17. Your Job Is Messing With Mine! The Impact of Mobile Device Use for Work During Family Time on the Spouse's Work Life.

    Science.gov (United States)

    Carlson, Dawn S; Thompson, Merideth J; Crawford, Wayne S; Boswell, Wendy R; Whitten, Dwayne

    2017-12-07

    The use of mobile technology for work purposes during family time has been found to affect employees' work and family lives. Using a matched sample of 344 job incumbents and their spouses, we examined the role of mobile device (MD) use for work during family time in the job incumbent-spouse relationship and how this MD use crosses over to affect the spouse's work life. Integrating the work-home resources model with family systems theory, we found that as job incumbents engage in MD use for work during family time, work-to-family conflict increases, as does the combined experience of relationship tension between job incumbents and spouses. This tension serves as a crossover mechanism, which then contributes to spouses' experience of family-to-work conflict and, subsequently, family spills over to work outcomes for the spouse in the form of reduced job satisfaction and performance. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  18. A modified Glenn shunt reduces right ventricular stroke work during left ventricular assist device therapy.

    Science.gov (United States)

    Schiller, Petter; Vikholm, Per; Hellgren, Laila

    2016-03-01

    Right ventricular (RV) failure is a major cause of morbidity and mortality after left ventricular assist device (LVAD) placement and remains hard to predict. We hypothesized that partial surgical exclusion of the RV with a modified Glenn shunt during LVAD treatment would reduce RV stroke work. An LVAD was implanted in eight pigs and a modified Glenn shunt was constructed. A conductance pressure-volume catheter was placed in the right ventricle through the apex. Haemodynamic data and pressure-volume loops were obtained at the following time periods: (i) baseline, (ii) open shunt, (iii) LVAD with closed shunt and (iii) LVAD and open shunt. During LVAD therapy, the right atrial (RA) pressure increased from 9 mmHg (9-9) to 15 mmHg (12-15), P = 0.01. RV stroke volume increased from 30 ml (29-40) to 51 ml (42-53), P work increased to 708 mmHg ml (654-1193) from 535 mmHg ml (424-717), P = 0.04, compared with baseline. During LVAD therapy in combination with a Glenn shunt, the RA pressure decreased from 15 mmHg (12-15) to 10 mmHg (7-11) when compared with LVAD therapy only, P = 0.01. A decrease in RV stroke work from 708 mmHg ml (654-1193) to 465 mmHg ml (366-711), P = 0.04, was seen when the LVAD was combined with a shunt, not significantly different from the baseline value (535 mmHg ml). The developed pressure in the right ventricle decreased from 29 mmHg (26-32) to 21 mmHg (20-24), P work during the use of the shunt with LVAD treatment. A modified Glenn shunt reduced RV volumes, RV stroke work and RA pressure during LVAD therapy in an experimental model of heart failure in pigs. © The Author 2015. Published by Oxford University Press on behalf of the European Association for Cardio-Thoracic Surgery. All rights reserved.

  19. Principles for a Code of Conduct for the Sustainable Management of Mangrove Ecosystems: A Work in Progress for Public Discussion

    DEFF Research Database (Denmark)

    Nielsen, Thomas

    The Principles for a Code of Conduct for Sustainable Management of Mangrove Ecosystems is a guide to assist states, local and national non-governmental organizations and other stakeholders to develop cooperatively local codes, laws and/or regulations to protect mangroves and the critical functions......, grassroots organizations and other interested individuals and groups. The Principles were formulated based on a review of global mangrove management experience, about fifteen country case studies, including Auastralia, from all regions where mangroves exist, and seven regional workshops to date. The purpose...... of making a presentation on the Mangrove Principles at IMPAC is to gain additional feedback from interested stakeholders and experts, in particular, to provide inputs to the content of the Principles and recommendations for activities to promote their use as a management tool. The Principles and many...

  20. Principles of Activity Theory in analysing the process of construction of pedagogic activities with the use of mobile devices in the Chemistry learning

    Directory of Open Access Journals (Sweden)

    Liliane da Silva Coelho Jacon

    2014-06-01

    Full Text Available Mobile devices emerge as the major players to ensure a favorable resource to connect, minimizing the limitation space-time constraints among people and enabling the use of emerging mobile learning (m-learning. The use of mobile devices in pedagogic praxis implies in a closer link between teachers in their initial development and their teacher educator in order to enable the incorporation of this mobile technology in undergraduate courses. This “approach” means the facilitation of meeting to discuss, reflect and talk about the incorporation of this technology in the teaching learning process. In this research, two professors had meetings to discuss and reflect about the employment of this mobile technology in the undergraduate course. One of them, a Chemistry teacher educator and the other is a computer and education teacher-research. The methodological approach is based on a qualitative method with some elements of action-research based on theoretical assumptions of the Activity Theory (ENGESTRÖM, 1999. Therefore, the study based on the debates over the use of mobile devices in the teaching of chemistry was developed as part of the undergraduate course in Chemistry at the Federal University of Rondonia. Among a set of activities, in which students and professors were present with their objects of specific activities, was presented the Activity system related to the construction of those activities. The analysis of SA from the perspective of the 5 principles of Activity Theory points out that the process of collaborative participation in the meetings, the implementation of activities with the students of the degree course and the preparation of scientific papers demonstrated the qualitative evolution of the chemistry teacher educator

  1. Microfluidic device for continuous single cells analysis via Raman spectroscopy enhanced by integrated plasmonic nanodimers

    KAUST Repository

    Perozziello, Gerardo; Candeloro, Patrizio; De Grazia, Antonio; Esposito, Francesco; Allione, Marco; Coluccio, Maria Laura; Tallerico, Rossana; Valpapuram, Immanuel; Tirinato, Luca; Das, Gobind; Giugni, Andrea; Torre, Bruno; Veltri, Pierangelo; Kruhne, Ulrich; Della Valle, Giuseppe; Di Fabrizio, Enzo M.

    2015-01-01

    In this work a Raman flow cytometer is presented. It consists of a microfluidic device that takes advantages of the basic principles of Raman spectroscopy and flow cytometry. The microfluidic device integrates calibrated microfluidic channels- where

  2. Compound semiconductor device physics

    CERN Document Server

    Tiwari, Sandip

    2013-01-01

    This book provides one of the most rigorous treatments of compound semiconductor device physics yet published. A complete understanding of modern devices requires a working knowledge of low-dimensional physics, the use of statistical methods, and the use of one-, two-, and three-dimensional analytical and numerical analysis techniques. With its systematic and detailed**discussion of these topics, this book is ideal for both the researcher and the student. Although the emphasis of this text is on compound semiconductor devices, many of the principles discussed will also be useful to those inter

  3. O trabalho como princípio educativo: algumas reflexões Work as educational principle: some reflections

    Directory of Open Access Journals (Sweden)

    Ricardo Ribeiro

    2009-06-01

    Full Text Available Após algumas reflexões sobre o conceito de trabalho e formação, este artigo aborda algumas orientações, ou princípios, que podem contribuir para a organização de programas de formação de adultos. Ao trabalhar em programas de formação dessa natureza, devemos ter em mente que trabalhamos com indivíduos que já possuem conhecimentos elaborados, experiências práticas e vivências que devem ser consideradas como ponto de partida. Assim, devemos considerar que a aprendizagem acontece ao longo da vida, e que um curso é apenas parte do percurso de aprendizagem. Outro aspecto importante é que programas de formação para adultos, especialmente aqueles desenvolvidos em situação de trabalho, devem ter sentido para aqueles que irão participar. Os participantes devem, portanto, aderir voluntariamente à proposta; caso contrário, ela poderá ser entendida apenas como algo imposto, e não como um ganho profissional efetivo. Nas situações de formação em situações de trabalho, é também fundamental que os programas sejam elaborados a partir de um apurado conhecimento da realidade daqueles que irão participar. Avaliar e preservar a memória do que foi realizado evita que ocorram eternos recomeços. Por fim, é fundamental que os programas de formação contem também com um programa de apoio aos participantes, de tal forma que eles se sintam mais seguros no trilhar os caminhos das mudanças, quando retornarem aos seus respectivos espaços de trabalho.After a glance at concepts such as work and education, this article approaches some orientations or principles that can contribute to the organization of adult education courses. When we work in education programs of this nature, we must always have in mind that we are working with individuals who already have theoretical knowledge and practical experiences that must be considered as starting points. We have to consider that learning happens throughout one's life and a course is no more

  4. Pressure redistribution devices: what works, at what cost and what's next?

    Science.gov (United States)

    Clancy, Michael J

    2013-08-01

    This article discusses the development and usage of pressure redistribution devices (PRDs) and their impact on the prevention and treatment of pressure ulcers within the NHS. The article outlines the history of the development of these devices and discusses the reasons for a lack of substantial evidence in support of the use of these devices, their impact on the NHS on cost and perceived outcome. The article describes the typical usage profile in a 500 bed NHS hospital and concludes with a view as to how that may change in the future. Copyright © 2013 Tissue Viability Society. Published by Elsevier Ltd. All rights reserved.

  5. System for deuterium-tritium mixture filling the working chamber of a dense plasma focus device

    International Nuclear Information System (INIS)

    Bondar', A.I.; Vyskubov, V.P.; Gerasimov, S.A.

    1981-01-01

    A gas-vacuum system designed for filling the gas-discharge chamber of a plasma focus device with equal-coaponent deuterium-tritium mixture is described. The system consists of a unit for gaseous mixture prepa ration and a unit for mixture absorption and device evacuation. The system provides the gaseous mixture purification of O 2 and N 2 impurities. Final tritium content in the gas-discharge chamber after tritium removal is not greater than 2x10 8 Bq/l. Tritium content in a sealed box in which the device is placed does not exceed 30 Bq/l that is less than limiting safe value. The conclusion is made that the described system design gives an opportunity to begin experimental studies at plasma focus devices with deuterium-tritium mixture [ru

  6. Principles for a code of conduct for the sustainable management of mangrove ecosystems: a work in progress for public discussion

    DEFF Research Database (Denmark)

    Nielsen, Thomas

    The Principles for a Code of Conduct for Sustainable Management of Mangrove Ecosystems is a guide to assist states, local and national non-governmental organizations and other stakeholders to develop cooperatively local codes, laws and/or regulations to protect mangroves and the critical functions...... they serve with regard to contributions to local livelihood, biodiversity conservation and coastal protection though sustainable management. The objective is to help bring attention to the importance of mangrove ecosystems, particularly to policy makers, to help arrest and reverse their loss. The Principles...... mangrove management experience, about fifteen country case studies from all regions where mangroves exist, and seven regional workshops to date. The purpose of the presentation at this ReNED forum is gain additional feedback from researchers, in particular, to provide input on the content of the Principles...

  7. Practices and Processes Used in the Return to Work of Injured New South Wales nurses: Are These Consistent With RTW Best Practice Principles?

    Science.gov (United States)

    James, Carole; Antoine, Michelle; Guest, Maya; Rivett, Darren; Kable, Ashley

    2018-03-01

    Purpose Workplace injury and illness rates are high within the nursing profession, and in conjunction with current nursing shortages, low retention rates, and the high cost of workplace injury, the need for effective return to work (RTW) for injured nurses is highlighted. This study aimed to identify current practices and processes used in the RTW of injured nurses, and determine if these are consistent with the seven principles for successful RTW as described by the Canadian Institute for Work & Health. Method As part of a larger cross-sectional study, survey data were collected from New South Wales nurses who had sustained a major workplace injury or illness. Survey questions were coded and matched to the seven principles for successful RTW. Results Of the 484 surveys eligible for analysis, most were from Registered Nurses (52%) in the Public Hospital Sector (48%). Responses indicated four main areas of concern: a commitment to health and safety by the workplace; early and considerate employer contact; provision of modified work; and individual knowledge of and involvement in the RTW process. Positive participant responses to co-worker and supervisor involvement were identified as areas consistent with best practice principles. Conclusions These findings suggest the practices and processes involved in the RTW of injured nurses are inconsistent with best practice principles for RTW, highlighting the need for interventions such as targeted employer education and training for improved industry RTW outcomes.

  8. PRINCIPLES OF INDICATION FOR EN-ROUTE FLIGHT PATHS OF THE AIRCRAFT ON THE SCREEN OF ON-BOARD DISPLAY DEVICES

    Directory of Open Access Journals (Sweden)

    V. V. Markelov

    2016-01-01

    Full Text Available Subject of Research.We consider the principles and algorithms for construction of en-route flight paths of an aircraft (airplane in a horizontal plane for their subsequent display on the navigation situation indicators in the cockpit. Navigation situation indicatorsaredisplay devices designed on the basis of flat liquid crystal panel. Methods. Flight trajectory display by on-board multifunction indicators is performed by successive drawing of graphic primitives available in the library and defined in accordance with an array of data to display the route. An array of data is generated by on-board software complex based on the information provided in the flight task and the corresponding «Jeppesen» database or analogous one. Formation of the array is carried out by bringing the set of trajectory paths to the format of three typical trajectories described. In addition, each of the types of trajectories has a standard description of the algorithm for calculating the parameters that make up an array of data to display.Main Results.The algorithms of forming and calculating the amounts of data of routing paths required for their construction and display on the multifunction indicators applied in avionics.Practical Relevance.These novel routing algorithms for constructing trajectory paths unify algorithms of generating information for display on the navigation situation indicators and optimize a set of calculated data for flight control at the trajectory in the horizontal plane.

  9. Experimental study of the performance of a very small repetitive plasma focus device in different working conditions

    Energy Technology Data Exchange (ETDEWEB)

    Goudarzi, S., E-mail: sgoudarzi@aeoi.org.ir; Babaee, H.; Esmaeli, A.; Nasiri, A. [Atomic Energy Organization of Iran, Plasma and Nuclear Fusion Research School, Nuclear Science and Technology Research Institute (Iran, Islamic Republic of)

    2017-01-15

    SORENA-1 is a very small repetitive Mather-type plasma focus device (20 J) that can operate at frequencies up to 1 Hz. This device has been designed and constructed in the Plasma and Nuclear Fusion Research School of the Nuclear Science and Technology Research Institute of Iran. In this article, the structure of SORENA-1 is described and results of experiments with Ar, Ne, and D{sub 2} working gases at several discharge voltages and initial pressures are presented and analyzed.

  10. The Syndrome Burnout as Deterioration of Work Environment and the TST Position of the Use of the Principles And Concepts Environmental

    Directory of Open Access Journals (Sweden)

    Erica Fabiola Brito Tuma

    2015-12-01

    Full Text Available This paper will address the applicability of environmental principles in cases of syndrome of "burnout". For this, it will analyze the concepts of general environment and its categories, highlighting the working environment in which the characteristics of its healthiness will be appointed. They will be treated also the concepts of degradation of environmental quality and pollution, and how they occur in the middle working environment, emphasizing the protection of quality of life and health of workers. So relate the "burnout" syndrome as the middle work environment degradation factor, and discussed the consequences of this framework. Finally, recent decisions will be presented the Superior Labor Court (TST about this psychological pathology.

  11. Empty-bladder (hysterographic) view on US for evaluation of intrauterine devices. Work in progress.

    Science.gov (United States)

    Carroll, R; Gombergh, R

    1987-06-01

    Ultrasound scanning of the pelvis with an empty bladder permits a true frontal view of the uterus to be easily obtained. This view is comparable to the en face view seen at hysterography performed with contrast material. Good definition both of the endometrium and the uterine wall makes this the optimal method for the evaluation of an intrauterine contraceptive device.

  12. Shaped by asymmetrical interdependence: a qualitative case study of the external influences on international non-governmental organizations' implementation of equity principles in HIV/AIDS work.

    Science.gov (United States)

    Dyke, Elizabeth; Edwards, Nancy; McDowell, Ian; Muga, Richard; Brown, Stephen

    2014-10-08

    Addressing inequities is a key role for international non-governmental organizations (INGOs) working in health and development. Yet, putting equity principles into practice can prove challenging. In-depth empirical research examining what influences INGOs' implementation of equity principles is limited. This study examined the influences on one INGO's implementation of equity principles in its HIV/AIDS programs. This research employed a case study with nested components (an INGO operating in Kenya, with offices in North America). We used multiple data collection methods, including document reviews, interviews (with staff, partners and clients of the INGO in Kenya), and participant observation (with Kenyan INGO staff). Participant observation was conducted with 10 people over three months. Forty-one interviews were completed, and 127 documents analyzed. Data analysis followed Auerbach and Silverstein's analytic process (2003), with qualitative coding conducted in multiple stages, using descriptive matrices, visual displays and networks (Miles and Huberman, 1994). There was a gap between the INGO's intent to implement equity principles and actual practice due to multiple influences from various players, including donors and country governments. The INGO was reliant on donor funding and needed permission from the Kenyan government to work in-country. Major influences included donor agendas and funding, donor country policies, and Southern country government priorities and legislation. The INGO privileged particular vulnerable populations (based on its reputation, its history, and the priorities of the Kenyan government and the donors). To balance its equity commitment with the influences from other players, the INGO aligned with the system as well as pushed back incrementally on the donors and the Kenyan government to influence these organizations' equity agendas. By moving its equity agenda forward incrementally and using its reputational advantage, the INGO avoided

  13. Cosmological principles. II. Physical principles

    International Nuclear Information System (INIS)

    Harrison, E.R.

    1974-01-01

    The discussion of cosmological principle covers the uniformity principle of the laws of physics, the gravitation and cognizability principles, and the Dirac creation, chaos, and bootstrap principles. (U.S.)

  14. Operational characteristics of a high voltage plasma focus device working with deuterium and heavy gas mixture

    International Nuclear Information System (INIS)

    Zoita, V.; Presura, R.; Gherendi, F.; Dumitrescu-Zoita, C.; Aliaga, R.

    1992-01-01

    The addition of a few neon percents to the deuterium gas filling of a medium energy plasma focus device (PFD) changes dramatically the radiation characteristics of the discharge as well as the pinch configuration. One exceptional result is the generation of high aspect ratio pinches shown clearly and reproducibly on X-ray pinhole camera images and on schlieren pictures. Another remarkable result is that these pinches which show no macroscopic instabilities copiously produce neutrons and hard X-rays. This confirms an experimental fact previously identified on a lower voltage PFD: the macroscopic instabilities do not play the decisive role in the neutronic performance of medium energy PFD's. (Author)

  15. 75 FR 47307 - Center for Devices and Radiological Health 510(k) Working Group Preliminary Report and...

    Science.gov (United States)

    2010-08-05

    ..., and Task Force on the Utilization of Science in Regulatory Decision Making Preliminary Report and...: The 510(k) Working Group and the Task Force on the Utilization of Science in Regulatory Decision Making. Volume I is entitled ``510(k) Working Group Preliminary Report and Recommendations.'' Volume II...

  16. Designing a Polymerase Chain Reaction Device Working with Radiation and Convection Heat Transfer

    Science.gov (United States)

    Madadelahi, M.; Kalan, K.; Shamloo, A.

    2018-05-01

    Gene proliferation is vital for infectious and genetic diseases diagnosis from a blood sample, even before birth. In addition, DNA sequencing, genetic finger-print analyzing, and genetic mutation detecting can be mentioned as other procedures requiring gene reproduction. Polymerase chain reaction, briefly known as PCR, is a convenient and effective way to accomplish this task; where the DNA containing sample faces three temperature phases alternatively. These phases are known as denaturation, annealing, and elongation/extension which in this study -regarding the type of the primers and the target DNA sequence- are set to occur at 95, 58, and 72 degrees of Celsius. In this study, a PCR device has been designed and fabricated which uses radiation and convection heat transfer at the same time to set and control the mentioned thermal sections. A 300W incandescent light bulb able to immediately turn off and on along with two 8×8 cm DC fans, controlled by a microcontroller as well as PID and PD controller codes are used to monitor the applied thermal cycles. In designing the controller codes it has been concerned that they not only control the temperature over the set-points as well as possible, but also increase the temperature variation rate between each two phases. The temperature data were plotted and DNA samples were used to assess the device function.

  17. Testing and extending the triple match principle in the nursing profession: a generational perspective on job demands, job resources and strain at work.

    Science.gov (United States)

    Lavoie-Tremblay, Melanie; Trépanier, Sarah-Geneviève; Fernet, Claude; Bonneville-Roussy, Arielle

    2014-02-01

    The Triple Match Principle offers insight into the interactive interplay between job demands and job resources in the prediction of work-related strain. The aim of this article was to examine the interplay among job demands, job resources and strain in the nursing profession (the Triple Match Principle) and to gain insight into potential generational differences by investigating generation as a moderator of that interplay. No research has been done to evaluate generational differences in the Triple Match Principle. In a context of nursing shortages, it seems important to examine the relevance of the Triple Match Principle with respect to different generations of nurses. Cross-sectional study. A total of 1254 public healthcare sector nurses in Quebec, Canada, completed a questionnaire in the autumn of 2010. The questionnaire was used to assess cognitive, emotional and physical job demands and resources; psychological distress; psychosomatic complaints; and turnover intention. The results supported the Triple Match Principle and showed that job resources were more likely to buffer the effect of job demands on strain as the degree of match in qualitative dimension among demands, resources and strain increased (33·3% of triple-match interactions, 22·22% of double-match interactions and 16·67% non-match interactions were significant). Moreover, generation played a key role in this interplay, as it increased the number of significant qualitative interactions among job demands, job resources and strain. The results underscore the necessity of providing adequate job resources tailored to the specific job demands nurses face, to counteract the negative effects of those demands. © 2013 John Wiley & Sons Ltd.

  18. Design and application of air-conditioning suit based on eddy current cooling principle for distribution network working with power uninterrupted

    Science.gov (United States)

    Xu, Li; Liu, Lanlan; Niu, Jie; Tang, Li; Li, Jinliang; Zhou, Zhanfan; Long, Chenhai; Yang, Qi; Yi, Ziqi; Guo, Hao; Long, Yang; Fu, Yanyi

    2017-05-01

    As social requirement of power supply reliability keeps rising, distribution network working with power uninterrupted has been widely carried out, while the high - temperature operating environment in summer can easily lead to physical discomfort for the operators, and then lead to safety incidents. Aiming at above problem, air-conditioning suit for distribution network working with power uninterrupted has been putted forward in this paper, and the structure composition and cooling principle of which has been explained, and it has been ultimately put to on-site application. The results showed that, cooling effect of air-conditioning suits was remarkable, and improved the working environment for the operators effectively, which is of great significance to improve Chinese level of working with power uninterrupted, reduce the probability of accidents and enhance the reliability of power supply.

  19. Analysis of existing work-zone devices with MASH safety performance criteria.

    Science.gov (United States)

    2009-02-01

    Crashworthy, work-zone, portable sign support systems accepted under NCHRP Report No. 350 were analyzed to : predict their safety peformance according to the TL-3 MASH evaluation criteria. An analysis was conducted to determine : which hardware param...

  20. Utilization of remote traffic monitoring devices for urban freeway work zone assessment.

    Science.gov (United States)

    2012-01-01

    The objective of this project was to promote and facilitate analysis and evaluation of the impacts of road construction activities in Smart : Work Zone Deployment Initiative (SWZDI) states. : The two primary objectives of this project were to assess ...

  1. Transformable Menu Component for Mobile Device Applications: Working with both Adaptive and Adaptable User Interfaces

    Directory of Open Access Journals (Sweden)

    V. Glavinic

    2008-08-01

    Full Text Available Using a learning system in a mobile environmentis not effective if barriers are not overcome in theinteraction with targeted users. For that purpose all mobileservices, including m-learning ones, demand specialattention being paid to interaction with the user. Whilemobile device applications are becoming more powerful,their development process must utilize the concepts ofuniversal access and universal usability. This paperdescribes the model of both adaptable and adaptive mobileuser interface, through the introduction of a transformablemenu component capable to be personalized to eachindividual user with respect to her/his preferences andinteraction style. We discuss the use of customization andadaptation techniques, with the aim to both enhance mobileHCI and to increase user satisfaction, particularly whenworking with graphically rich m-learning applications.

  2. Silicon solid state devices and radiation detection

    CERN Document Server

    Leroy, Claude

    2012-01-01

    This book addresses the fundamental principles of interaction between radiation and matter, the principles of working and the operation of particle detectors based on silicon solid state devices. It covers a broad scope with respect to the fields of application of radiation detectors based on silicon solid state devices from low to high energy physics experiments including in outer space and in the medical environment. This book covers stateof- the-art detection techniques in the use of radiation detectors based on silicon solid state devices and their readout electronics, including the latest developments on pixelated silicon radiation detector and their application.

  3. The working of RVNRL pilot plant of Rubber Board and it's safety devices

    International Nuclear Information System (INIS)

    Britto, I.J.; Thomas, E.V.

    1996-01-01

    A pilot plant for producing radiation vulcanized natural rubber latex (RVNRL) was established at Rubber Board, India in 1992. Irradiation is done by a batch process in the plant. The plant has a versatile safety system for safety of operators and people working in and around the plant

  4. Ranking and analysis administrative barriers of fundamental principles and rights at work from the perspective of employers by using parametrical analysis and the TOPSIS method

    Directory of Open Access Journals (Sweden)

    Gholam Reza Bordbar

    2014-10-01

    Full Text Available ILO, adopted and communicated several types of document which include Conventions, recommendations, resolutions and statements etc.among all of them, convention has a special place because the members states accept duties and obligations. Among these conventions, those conventions that are related to the fundamental rights of labor had special importance and prestige. Member countries of the Organization like Iran are required to implement the relevant commitments. this study aimed to analyze administrative obstacles of the Fundamental Principles and Rights at Work by getting weight to problems and ranking them. The result of study show that Prohibition of child labor is more important than other aspects of Fundamental Principles and Rights at Work. in aspect of child labor most important obstacle was "red tape" ,in others categories result was as follow: in lack of collective bargaining most important obstacle was made emotional decisions, in forced labor most important obstacle was distrust of other workers, in gender discrimination most important obstacle was Working environment, in people inequality most important obstacle was Subjective judgments manager.

  5. Interviews for the assessment of long-term incapacity for work: a study on adherence to protocols and principles

    NARCIS (Netherlands)

    de Boer, Wout E. L.; Wind, Haije; van Dijk, Frank J. H.; Willems, Han H. B. M.

    2009-01-01

    ABSTRACT: BACKGROUND: Social insurance assessments for long-term incapacity for work are performed by Social Insurance Physicians (SIPs) who rely on interviews with claimants as an important part of the process. These interviews, however, are susceptible to bias. For that reason, in the Netherlands

  6. Development of a rotary clap mechanism for positive-displacement rotary pumps: Kinematic analysis and working principle

    International Nuclear Information System (INIS)

    Shim, Sung Bo; Kim, Kyeong Uk; Park, Young Jun; Kim, Jong Mun

    2015-01-01

    A five-bar spatial mechanism named as a rotary clap mechanism is developed as a pumping device for positive displacement rotary pumps. The mechanism comprises a driving crank, a shaft link with two pins and two gears mounted on the middle and both ends, two rotors with jaws equally spaced along their circumferences, and two fixed internal gears. As the crank rotates, the gear pin-jointed to the crank rotates about the crank pin and at the same time rotates about the center of the fixed internal gears like a hypo-cyclic gear train. The gear-attached shaft link also rotates about the crank pin and about the fixed internal gears at the same time. This motion of the shaft link makes the pins rotate about the center of the fixed internal gears with a periodically varying radius. Therefore, two rotors driven by the pins rotate with different angular velocities. One rotor alternately leads and lags relative to the other rotor. These lead-lag motions between the two jaws of the rotors, which result in suction and discharge required for pumping, resemble hand clapping from which the mechanism was named. Construction and design parameters of the rotary clap mechanism are introduced, and kinematic analysis of this mechanism is performed. The relationships among design parameters, inherent constraints, and effects of design parameters on the is placement of mechanism are also presented.

  7. Bernoulli's Principle

    Science.gov (United States)

    Hewitt, Paul G.

    2004-01-01

    Some teachers have difficulty understanding Bernoulli's principle particularly when the principle is applied to the aerodynamic lift. Some teachers favor using Newton's laws instead of Bernoulli's principle to explain the physics behind lift. Some also consider Bernoulli's principle too difficult to explain to students and avoid teaching it…

  8. Dave Eggers's a heartbreaking work of staggering genius: memoir as a "pain-relief device".

    Science.gov (United States)

    Miller, Elise

    2011-10-01

    Dave Eggers's memoir is an important addition to the tradition of autobiography in America, and offers significant contributions to our understanding of creativity, sublimation, and the psychology of the memoir-writing process. A Heartbreaking Work of Staggering Genius is really two books--an autobiographical narrative about unbearable suffering, and a book of psychoanalytic commentary on the challenges of writing a memoir about catastrophic loss and trauma. The main narrative suggests the psychological resilience it takes to contain unbearable suffering. The metanarrative renders transparent the mind of someone who is both remembering his losses and constantly reflecting upon the process of writing about them. Eggers's identification with authorship, rather than bereavement or traumatization, may have played an important role in containing his affect and his sense of self when the heartbreaking events were originally unfolding. But a price is paid when a son uses his art to construct a new identity as an author--unconscious conflicts, primitive affect, anxieties about failing, as well as guilt about succeeding--consequences often missed by readers. Heartbreaking is a palimpsest, a story about story-telling superimposed on tales of death and survival, but its messages will be missed unless all its parts are preserved when being read or studied.

  9. Stereotactic body radiotherapy for liver tumors. Principles and practical guidelines of the DEGRO Working Group on Stereotactic Radiotherapy

    International Nuclear Information System (INIS)

    Sterzing, Florian; Brunner, Thomas B.; Ernst, Iris; Greve, Burkhard; Baus, Wolfgang W.; Herfarth, Klaus; Guckenberger, Matthias

    2014-01-01

    This report of the Working Group on Stereotactic Radiotherapy of the German Society of Radiation Oncology (DEGRO) aims to provide a practical guideline for safe and effective stereotactic body radiotherapy (SBRT) of liver tumors. The literature on the clinical evidence of SBRT for both primary liver tumors and liver metastases was reviewed and analyzed focusing on both physical requirements and special biological characteristics. Recommendations were developed for patient selection, imaging, planning, treatment delivery, motion management, dose reporting, and follow-up. Radiation dose constraints to critical organs at risk are provided. SBRT is a well-established treatment option for primary and secondary liver tumors associated with low morbidity. (orig.) [de

  10. Closed-form dynamics of a hexarot parallel manipulator by means of the principle of virtual work

    Science.gov (United States)

    Pedrammehr, Siamak; Nahavandi, Saeid; Abdi, Hamid

    2018-04-01

    In this research, a systematic approach to solving the inverse dynamics of hexarot manipulators is addressed using the methodology of virtual work. For the first time, a closed form of the mathematical formulation of the standard dynamic model is presented for this class of mechanisms. An efficient algorithm for solving this closed-form dynamic model of the mechanism is developed and it is used to simulate the dynamics of the system for different trajectories. Validation of the proposed model is performed using SimMechanics and it is shown that the results of the proposed mathematical model match with the results obtained by the SimMechanics model.

  11. Factors affecting the appreciation generated through applying human factors/ergonomics (HFE) principles to systems of work.

    Science.gov (United States)

    So, R H Y; Lam, S T

    2014-01-01

    This retrospective study examined the levels of appreciation (applause) given by clients to Human Factors/Ergonomic (HFE) specialists after they have modified the systems of work. Thirteen non-academic projects were chosen because the HFE interventions involved changed the way workers work at their workplaces. Companies involved range from multi-national corporations and military organizations with thousands of employees to small trading companies with less than 10 employees. In 5 cases the HFE recommendations were fully adopted and well appreciated. In 4 they were largely ignored and not appreciated, with partial adoption and some appreciation in the other 4 cases. Three factors that predict appreciation were identified: (i) alignment between the benefits HFE can provide and the project's key performance indices; (ii) awareness of HFE among the client's senior management; and (iii) a team organization appropriate for applying HFE recommendations. Having an HFE specialist on the client's side can greatly increase levels of appreciation, but lack of such a specialist will not affect levels of appreciation. A clear contractual requirement for HFE intervention does not promote appreciation significantly, but its absence can greatly reduce levels of appreciation. These relationships are discussed using the Kano's model of quality. Means to generate greater appreciation of the benefits of HFE are discussed. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  12. Experimental evaluation of cooling efficiency of the high performance cooling device

    Science.gov (United States)

    Nemec, Patrik; Malcho, Milan

    2016-06-01

    This work deal with experimental evaluation of cooling efficiency of cooling device capable transfer high heat fluxes from electric elements to the surrounding. The work contain description of cooling device, working principle of cooling device, construction of cooling device. Experimental part describe the measuring method of device cooling efficiency evaluation. The work results are presented in graphic visualization of temperature dependence of the contact area surface between cooling device evaporator and electronic components on the loaded heat of electronic components in range from 250 to 740 W and temperature dependence of the loop thermosiphon condenser surface on the loaded heat of electronic components in range from 250 to 740 W.

  13. Experimental evaluation of cooling efficiency of the high performance cooling device

    Energy Technology Data Exchange (ETDEWEB)

    Nemec, Patrik, E-mail: patrik.nemec@fstroj.uniza.sk; Malcho, Milan, E-mail: milan.malcho@fstroj.uniza.sk [University of Žilina, Faculty of Mechanical Engineering, Department of Power Engineering, Univerzitna 1, 010 26 Žilina (Slovakia)

    2016-06-30

    This work deal with experimental evaluation of cooling efficiency of cooling device capable transfer high heat fluxes from electric elements to the surrounding. The work contain description of cooling device, working principle of cooling device, construction of cooling device. Experimental part describe the measuring method of device cooling efficiency evaluation. The work results are presented in graphic visualization of temperature dependence of the contact area surface between cooling device evaporator and electronic components on the loaded heat of electronic components in range from 250 to 740 W and temperature dependence of the loop thermosiphon condenser surface on the loaded heat of electronic components in range from 250 to 740 W.

  14. Design principles for a large RFP experiment

    International Nuclear Information System (INIS)

    Phillpott, J.; Rostagni, G.; Di Marco, J.

    1981-01-01

    An RFP experiment (RFX) has been designed by an International Design Team, by groups of collaborating physicists and engineers working in their home laboratories. This international collaborative project has been brought to an advanced stage of system and component design by the co-operation of three design teams under the co-ordination of a Design Manager, based at Culham Laboratory. The paper summaries the important design principles for an RFP device, based on the outcome of this collaborative design project

  15. High pulmonary vascular resistance in addition to low right ventricular stroke work index effectively predicts biventricular assist device requirement.

    Science.gov (United States)

    Imamura, Teruhiko; Kinugawa, Koichiro; Kinoshita, Osamu; Nawata, Kan; Ono, Minoru

    2016-03-01

    Although the right ventricular stroke work index (RVSWI) is a good index for RV function, a low RVSWI is not necessarily an indicator for the need for a right ventricular assist device at the time of left VAD implantation. We here aimed to determine a more precise indicator for the need for a biventricular assist device (BiVAD). In total, 116 patients (mean age, 38 ± 14 years), who underwent hemodynamic assessments preoperatively including 12 BiVAD patients, and had been followed at our institute from 2003 to 2015, were included. Multivariate logistic regression analysis indicated that RVSWI and pulmonary vascular resistance (PVR) were independent predictors of BiVAD requirement (P 5 g/m, PVR 5, PVR > 3.7), (3) RV failure (RVSWI 3.7), and examined. Most of the patients in Group 4 (75 %), with acutely depressed hemodynamics and inflammatory responses in the myocardium, required BiVAD. Overall, patients with BiVAD had a worse survival rate as compared with those with LVAD alone. In conclusion, high PVR in addition to low RVSWI effectively predicts BiVAD requirement.

  16. Clinical evaluation of cardiovascular devices: principles, problems, and proposals for European regulatory reform. Report of a policy conference of the European Society of Cardiology.

    Science.gov (United States)

    Fraser, Alan G; Daubert, Jean-Claude; Van de Werf, Frans; Estes, N A Mark; Smith, Sidney C; Krucoff, Mitchell W; Vardas, Panos E; Komajda, Michel

    2011-07-01

    The European Commission announced in 2008 that a fundamental revision of the medical device directives is being considered in order to clarify and strengthen the current legal framework. The system for testing and approving devices in Europe was established >20 years ago as a 'New Approach' to a previously little-regulated industry. It is recognized by many that the regulatory system has not kept pace with technological advances and changing patterns of medical practice. New legislation will be drafted during 2011, but medical experts have been little involved in this important process. This context makes it an opportune time for a professional association to advise from both clinical and academic perspectives about changes which should be made to improve the safety and efficacy of devices used in clinical practice and to develop more appropriate systems for their clinical evaluation and post-marketing surveillance. This report summarizes how medical devices are regulated and it reviews some serious clinical problems that have occurred with cardiovascular devices. Finally, it presents the main recommendations from a Policy Conference on the Clinical Evaluation of Cardiovascular Devices that was held at the European Heart House in January 2011.

  17. Novel Magnetic Devices

    National Research Council Canada - National Science Library

    Schuller, Ivan

    2007-01-01

    ...: ballistic magnetoresistance, magnetic field proximity effect and spin drag. These three phenomena would then be exploited for the design of novel device architectures and to investigate the physical principles behind these devices...

  18. Stereotactic body radiotherapy for liver tumors. Principles and practical guidelines of the DEGRO Working Group on Stereotactic Radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Sterzing, Florian [Deutsches Krebsforschungszentrum (DKFZ), Klinische Kooperationseinheit Strahlentherapie, Heidelberg (Germany); Radiologische Universitaetsklinik, Abteilung fuer Radioonkologie und Strahlentherapie, Heidelberg (Germany); Brunner, Thomas B. [Universitaetsklinikum Freiburg, Klinik fuer Strahlenheilkunde, Radiologische Klinik, Freiburg (Germany); Ernst, Iris; Greve, Burkhard [Universitaetsklinikum Muenster, Klinik fuer Strahlentherapie - Radioonkologie, Muenster (Germany); Baus, Wolfgang W. [Universitaetsklinikum Koeln, Klinik und Poliklinik fuer Strahlentherapie, Koeln (Germany); Herfarth, Klaus [Radiologische Universitaetsklinik, Abteilung fuer Radioonkologie und Strahlentherapie, Heidelberg (Germany); Guckenberger, Matthias [UniversitaetsSpital Zuerich, Klinik fuer Radio-Onkologie, Zuerich (Switzerland)

    2014-10-15

    This report of the Working Group on Stereotactic Radiotherapy of the German Society of Radiation Oncology (DEGRO) aims to provide a practical guideline for safe and effective stereotactic body radiotherapy (SBRT) of liver tumors. The literature on the clinical evidence of SBRT for both primary liver tumors and liver metastases was reviewed and analyzed focusing on both physical requirements and special biological characteristics. Recommendations were developed for patient selection, imaging, planning, treatment delivery, motion management, dose reporting, and follow-up. Radiation dose constraints to critical organs at risk are provided. SBRT is a well-established treatment option for primary and secondary liver tumors associated with low morbidity. (orig.) [German] Die Arbeitsgruppe Stereotaxie der Deutschen Gesellschaft fuer Radioonkologie (DEGRO) legt hier eine Empfehlung zur sicheren und effektiven Durchfuehrung der SBRT von Lebertumoren vor. Eine Literaturrecherche zur Untersuchung der Evidenz der SBRT sowohl fuer primaere Lebertumore als auch fuer Lebermetastasen wurde durchgefuehrt. Auf dieser Basis werden Empfehlungen fuer technisch-physikalische Voraussetzungen wie auch fuer die taegliche Praxis der Leber-SBRT gegeben. Weiterhin werden radiobiologische Besonderheiten dieses Verfahrens dargestellt. Praktische Vorgaben werden fuer Patientenselektion, Bildgebung, Planung, Applikation, Bewegungsmanagement, Dosisdokumentation und Follow-up gegeben. Dosisempfehlungen fuer die kritischen Risikoorgane werden dargestellt. Die SBRT stellt eine etablierte Behandlungsmethode fuer primaere und sekundaere Lebertumore dar und ist mit niedriger Morbiditaet assoziiert. (orig.)

  19. Finite volume analysis of temperature effects induced by active MRI implants with cylindrical symmetry: 1. Properly working devices

    Directory of Open Access Journals (Sweden)

    Schnorr Jörg

    2005-04-01

    Full Text Available Abstract Background Active Magnetic Resonance Imaging implants are constructed as resonators tuned to the Larmor frequency of a magnetic resonance system with a specific field strength. The resonating circuit may be embedded into or added to the normal metallic implant structure. The resonators build inductively coupled wireless transmit and receive coils and can amplify the signal, normally decreased by eddy currents, inside metallic structures without affecting the rest of the spin ensemble. During magnetic resonance imaging the resonators generate heat, which is additional to the usual one described by the specific absorption rate. This induces temperature increases of the tissue around the circuit paths and inside the lumen of an active implant and may negatively influence patient safety. Methods This investigation provides an overview of the supplementary power absorbed by active implants with a cylindrical geometry, corresponding to vessel implants such as stents, stent grafts or vena cava filters. The knowledge of the overall absorbed power is used in a finite volume analysis to estimate temperature maps around different implant structures inside homogeneous tissue under worst-case assumptions. The "worst-case scenario" assumes thermal heat conduction without blood perfusion inside the tissue around the implant and mostly without any cooling due to blood flow inside vessels. Results The additional power loss of a resonator is proportional to the volume and the quality factor, as well as the field strength of the MRI system and the specific absorption rate of the applied sequence. For properly working devices the finite volume analysis showed only tolerable heating during MRI investigations in most cases. Only resonators transforming a few hundred mW into heat may reach temperature increases over 5 K. This requires resonators with volumes of several ten cubic centimeters, short inductor circuit paths with only a few 10 cm and a quality

  20. Finite volume analysis of temperature effects induced by active MRI implants with cylindrical symmetry: 1. Properly working devices.

    Science.gov (United States)

    Busch, Martin H J; Vollmann, Wolfgang; Schnorr, Jörg; Grönemeyer, Dietrich H W

    2005-04-08

    Active Magnetic Resonance Imaging implants are constructed as resonators tuned to the Larmor frequency of a magnetic resonance system with a specific field strength. The resonating circuit may be embedded into or added to the normal metallic implant structure. The resonators build inductively coupled wireless transmit and receive coils and can amplify the signal, normally decreased by eddy currents, inside metallic structures without affecting the rest of the spin ensemble. During magnetic resonance imaging the resonators generate heat, which is additional to the usual one described by the specific absorption rate. This induces temperature increases of the tissue around the circuit paths and inside the lumen of an active implant and may negatively influence patient safety. This investigation provides an overview of the supplementary power absorbed by active implants with a cylindrical geometry, corresponding to vessel implants such as stents, stent grafts or vena cava filters. The knowledge of the overall absorbed power is used in a finite volume analysis to estimate temperature maps around different implant structures inside homogeneous tissue under worst-case assumptions. The "worst-case scenario" assumes thermal heat conduction without blood perfusion inside the tissue around the implant and mostly without any cooling due to blood flow inside vessels. The additional power loss of a resonator is proportional to the volume and the quality factor, as well as the field strength of the MRI system and the specific absorption rate of the applied sequence. For properly working devices the finite volume analysis showed only tolerable heating during MRI investigations in most cases. Only resonators transforming a few hundred mW into heat may reach temperature increases over 5 K. This requires resonators with volumes of several ten cubic centimeters, short inductor circuit paths with only a few 10 cm and a quality factor above ten. Using MR sequences, for which the MRI

  1. COMMUNICATION - ORGANIZATIONS’ WORK DEVICE

    OpenAIRE

    LAVINIA HULEA

    2010-01-01

    Communication represents a complex process of transmitting messages, owing to which the emitter encodes the information transmitted through a specific channel towards a receiver that will decode it. Owing to communication, organizations transmit to their customers the fact that they are capable of meeting one of their needs, of settling a problem or of offering a profit. Non-verbal and para-verbal communications usually accompany verbal communication. The importance of assimilating the forms ...

  2. Miniaturised differential micro-calorimeter. Work note ESU Nr 1212

    International Nuclear Information System (INIS)

    Barberi, P.

    1970-01-01

    The author reports the design and realisation of a miniaturized calorimeter which can be quickly implemented, and is particularly appropriate for laboratories working with fluorinating gases. He describes the operation principle, the device realisation, its uses

  3. A new computing principle

    International Nuclear Information System (INIS)

    Fatmi, H.A.; Resconi, G.

    1988-01-01

    In 1954 while reviewing the theory of communication and cybernetics the late Professor Dennis Gabor presented a new mathematical principle for the design of advanced computers. During our work on these computers it was found that the Gabor formulation can be further advanced to include more recent developments in Lie algebras and geometric probability, giving rise to a new computing principle

  4. Aproximações sobre a transdisciplinaridade: algumas linhas históricas, fundamentos e princípios aplicados ao trabalho de equipe Approaching transdisciplinarity: some historical lines, foundations and applied principles to team work

    Directory of Open Access Journals (Sweden)

    Isac Nikos Iribarry

    2003-01-01

    Full Text Available O objetivo deste artigo é o de apresentar algumas aproximações conceituais e práticas sobre o tema da transdisciplinaridade. Em um primeiro momento, as aproximações realizadas serão alternadas pela exposição teórica dos temas relacionados à transdisciplinaridade e por algumas ilustrações práticas dos conceitos. O conceito de disciplina e suas derivações - multidisciplinaridade, pluridisciplinaridade, interdisciplinaridade e transdisciplinaridade - serão examinados em suas diferenças e conseqüências para o estabelecimento de relações entre diferentes disciplinas. Em seguida, serão apresentadas algumas origens históricas e alguns fundamentos da transdisciplinaridade. Na etapa final do trabalho, serão examinados os princípios práticos do trabalho de equipe em uma situação de transdisciplinaridade. Tais princípios estão organizados a partir do trabalho em equipe, da geração de novos dispositivos, da familiarização dos profissionais com cada área diferente da sua, da legibilidade e compartilhamento dos discursos e da tomada de decisão horizontal.This article aims at presenting some conceptual and practical approaches on transdisciplinarity. At first, all the made approaches will be presented in an alterned way with the theorical presentation of themes related to transdisciplinarity. Some practical illustrations of those concepts will be presented as well. The concept of disciplinarity and its derivations - multidisciplinarity, pluridisciplinarity and transdisciplinarity - are examined in their differences, as well as in their consequences for establishing a relationship between different areas. Following that, some historical origins and foundations of transdisciplinarity will be presented. In the last part of this paper, the practical principles of team work in a case of transdisciplinarity will be discussed. Those principles are organized from the work carried out by the team work, the generation of new devices

  5. NanoBiosensing Principles, Development and Application

    CERN Document Server

    Ju, Huangxian; Wang, Joseph

    2011-01-01

    This book will cover the full scope of nanobiosensing, which combines the newest research results in the cross-disciplines of chemistry, biology, and materials science with biosensing and bioanalysis to develop novel detection principles, sensing mechanisms, and device engineering methods. It not only covers the important types of nanomaterials for biosensing applications, including carbon nanotubes, carbon nanofiber, quantum dots, fullerenes, fluorescent and biological molecules, etc., but also illustrates a wide range of sensing principles, including electrochemical detection, fluorescence, chemiluminesence, antibody-antigen interactions, and magnetic detection. The book details novel developments in the methodology and devices of biosensing and bioanalysis combined with nanoscience and nanotechnology, as well as their applications in biomedicine and environmental monitoring. Furthermore, the reported works on the application and biofunction of nanoparticles have attracted extensive attention and interest, ...

  6. Towards open collaborative health informatics - The Role of free/libre open source principles. Contribution of the IMIA Open Source Health Informatics Working Group.

    Science.gov (United States)

    Karopka, T; Schmuhl, H; Marcelo, A; Molin, J Dal; Wright, G

    2011-01-01

    : To analyze the contribution of Free/Libre Open Source Software in health care (FLOSS-HC) and to give perspectives for future developments. The paper summarizes FLOSS-related trends in health care as anticipated by members of the IMIA Open Source Working Group. Data were obtained through literature review and personal experience and observations of the authors in the last two decades. A status quo is given by a frequency analysis of the database of Medfloss.org, one of the world's largest platforms dedicated to FLOSS-HC. The authors discuss current problems in the field of health care and finally give a prospective roadmap, a projection of the potential influences of FLOSS in health care. FLOSS-HC already exists for more than 2 decades. Several projects have shown that FLOSS may produce highly competitive alternatives to proprietary solutions that are at least equivalent in usability and have a better total cost of ownership ratio. The Medfloss.org database currently lists 221 projects of diverse application types. FLOSS principles hold a great potential for addressing several of the most critical problems in health care IT. The authors argue that an ecosystem perspective is relevant and that FLOSS principles are best suited to create health IT systems that are able to evolve over time as medical knowledge, technologies, insights, workflows etc. continuously change. All these factors that inherently influence the development of health IT systems are changing at an ever growing pace. Traditional models of software engineering are not able to follow these changes and provide up-to-date systems for an acceptable cost/value ratio. To allow FLOSS to positively influence Health IT in the future a "FLOSS-friendly" environment has to be provided. Policy makers should resolve uncertainties in the legal framework that disfavor FLOSS. Certification procedures should be specified in a way that they do not raise additional barriers for FLOSS.

  7. Principle of a liquid nitrogen irradiation device and its realization for use in a swimming-pool type reactor; Principe d'un dispositif d'irradiation a azote liquide et sa realisation pour utilisation dans une pile piscine

    Energy Technology Data Exchange (ETDEWEB)

    Bochirol, L; Doulat, J; Weil, L [Commissariat a l' Energie Atomique, Grenoble (France).Centre d' Etudes Nucleaires

    1961-07-01

    The problem of pile irradiation of samples immersed in liquid nitrogen has been solved with total elimination of explosion hazards and high reliability (no moving parts). The principle of the device is that of a double bath: one of high purity nitrogen cools the samples at the level of the core; a second of commercial nitrogen is located above the first one, outside the high radiation field, and works as a continuous condenser for the pure nitrogen, the flow-back of which is provided simply by gravity. The apparatus described in detail here has been designed for a swimming-pool pile. It was so designed as to provide absolute protection against radiations and to allow the irradiated samples to be easily removed in the cold condition. This apparatus has been in operation for several months. In a fast flux greater than 10{sup 13} neutrons/cm{sup 2}.s and a {gamma}-flux of the order of 10{sup 8} roentgens/h, the consumption of liquid nitrogen is of the order of 100 liters a day. (author) [French] On a resolu le probleme de l'irradiation en pile d'echantillons immerges dans l'azote liquide en construisant un appareil d'un fonctionnement sur (aucune partie n'est mobile) qui elimine completement les dangers d'explosion. Le principe de l'appareil est celui d'un double bain: l'un, d'azote pur, refroidit les echantillons au niveau du coeur du reacteur; l'autre, d'azote commercial, est situe au-dessus du premier, hors du champ de rayonnement intense, et sert de condenseur continu pour l'azote pur. Ce dernier ainsi reliquefie regagne son bain par simple gravite. L'appareil decrit en detail ici, est concu pour une pile piscine. Il a ete etudie de facon a ne creer aucune fuite de rayonnement et a permettre la recuperation aisee des echantillons irradies sans rechauffage de ceux-ci. Cet appareil est en fonctionnement depuis plusieurs mois. Dans un flux rapide superieur a 10{sup 13} neutrons/cm{sup 2}.s et un flux {gamma} de l'ordre de 10{sup 8} roentgens/h, la consommation d

  8. Principles and practice of psychopharmacotherapy

    National Research Council Canada - National Science Library

    Janicak, Philip G; Marder, Stephen R; Pavuluri, Mani N

    2011-01-01

    "Fully updated for its Fifth Edition, Principles and Practice of Psychopharmacotherapy summarizes the latest data on hundreds of drug and device-based therapies and offers practical, evidence-based...

  9. The development and application of solid polymer electrolysis enrichment device of tritium in water

    International Nuclear Information System (INIS)

    Wen Xuelian; Yang Hailan Wu Bin; Yang Huaiyuan

    2003-01-01

    This paper briefly describes the working principle of solid polymer electrolysis enrichment device of tritium in water, presents experiments and works in development of SPE tritium automatic electrolysis enrichment device by CIRP, with which the water samples had been processed for TRIC2000, and the measurement results are satisfied

  10. Douching With Water Works Device for Perceived Vaginal Odor With or Without Complaints of Discharge in Women With No Infectious Cause of Vaginitis: A Pilot Study

    Science.gov (United States)

    Chatwani, Ashwin J.; Hassan, Sarmina; Rahimi, Salma; Jeronis, Stacey; Dandolu, Vani

    2006-01-01

    Objective. To determine if douching with Water Works device for 1 month can (1) lower or eliminate perceived vaginal odor by subject; (2) have any effects on vaginal ecosystem. Methods. Ten women with perceived vaginal odor with or without discharge, douched every day for 4 weeks in an open-label, nonrandomized pilot study. Primary outcome measures included perceived vaginal odor by subject, lactobacilli score from Nugent slide, and acceptance of the Water Works douching system. Secondary outcome included the safety of using this douching device. Results. At week 4, there was improvement in vaginal odor (P = .0006) and there was no significant change in lactobacilli score. Conclusion. Douching with Water Works device is associated with reduction or elimination of vaginal odor without adversely affecting the vaginal ecosystem. PMID:17485816

  11. The Optimization Based Dynamic and Cyclic Working Strategies for Rechargeable Wireless Sensor Networks with Multiple Base Stations and Wireless Energy Transfer Devices

    Science.gov (United States)

    Ding, Xu; Han, Jianghong; Shi, Lei

    2015-01-01

    In this paper, the optimal working schemes for wireless sensor networks with multiple base stations and wireless energy transfer devices are proposed. The wireless energy transfer devices also work as data gatherers while charging sensor nodes. The wireless sensor network is firstly divided into sub networks according to the concept of Voronoi diagram. Then, the entire energy replenishing procedure is split into the pre-normal and normal energy replenishing stages. With the objective of maximizing the sojourn time ratio of the wireless energy transfer device, a continuous time optimization problem for the normal energy replenishing cycle is formed according to constraints with which sensor nodes and wireless energy transfer devices should comply. Later on, the continuous time optimization problem is reshaped into a discrete multi-phased optimization problem, which yields the identical optimality. After linearizing it, we obtain a linear programming problem that can be solved efficiently. The working strategies of both sensor nodes and wireless energy transfer devices in the pre-normal replenishing stage are also discussed in this paper. The intensive simulations exhibit the dynamic and cyclic working schemes for the entire energy replenishing procedure. Additionally, a way of eliminating “bottleneck” sensor nodes is also developed in this paper. PMID:25785305

  12. The optimization based dynamic and cyclic working strategies for rechargeable wireless sensor networks with multiple base stations and wireless energy transfer devices.

    Science.gov (United States)

    Ding, Xu; Han, Jianghong; Shi, Lei

    2015-03-16

    In this paper, the optimal working schemes for wireless sensor networks with multiple base stations and wireless energy transfer devices are proposed. The wireless energy transfer devices also work as data gatherers while charging sensor nodes. The wireless sensor network is firstly divided into sub networks according to the concept of Voronoi diagram. Then, the entire energy replenishing procedure is split into the pre-normal and normal energy replenishing stages. With the objective of maximizing the sojourn time ratio of the wireless energy transfer device, a continuous time optimization problem for the normal energy replenishing cycle is formed according to constraints with which sensor nodes and wireless energy transfer devices should comply. Later on, the continuous time optimization problem is reshaped into a discrete multi-phased optimization problem, which yields the identical optimality. After linearizing it, we obtain a linear programming problem that can be solved efficiently. The working strategies of both sensor nodes and wireless energy transfer devices in the pre-normal replenishing stage are also discussed in this paper. The intensive simulations exhibit the dynamic and cyclic working schemes for the entire energy replenishing procedure. Additionally, a way of eliminating "bottleneck" sensor nodes is also developed in this paper.

  13. Circuit engineering principles for construction of bipolar large-scale integrated circuit storage devices and very large-scale main memory

    Science.gov (United States)

    Neklyudov, A. A.; Savenkov, V. N.; Sergeyez, A. G.

    1984-06-01

    Memories are improved by increasing speed or the memory volume on a single chip. The most effective means for increasing speeds in bipolar memories are current control circuits with the lowest extraction times for a specific power consumption (1/4 pJ/bit). The control current circuitry involves multistage current switches and circuits accelerating transient processes in storage elements and links. Circuit principles for the design of bipolar memories with maximum speeds for an assigned minimum of circuit topology are analyzed. Two main classes of storage with current control are considered: the ECL type and super-integrated injection type storage with data capacities of N = 1/4 and N 4/16, respectively. The circuits reduce logic voltage differentials and the volumes of lexical and discharge buses and control circuit buses. The limiting speed is determined by the antiinterference requirements of the memory in storage and extraction modes.

  14. Reducing repeat pregnancies in adolescence: applying realist principles as part of a mixed-methods systematic review to explore what works, for whom, how and under what circumstances.

    Science.gov (United States)

    Charles, Joanna M; Rycroft-Malone, Jo; Aslam, Rabeea'h; Hendry, Maggie; Pasterfield, Diana; Whitaker, Rhiannon

    2016-09-20

    Previous research has demonstrated emotional, psychological and educational harm to young mothers following unintended conceptions. The UK has one of the highest rates of pregnancies in adolescence in Western Europe with a high proportion of these being repeat pregnancies, making it a topic of interest for public health policy makers, and health and social care practitioners. As part of a wider mixed-methods systematic review, realist principles were applied to synthesise evidence about interventions aiming to reduce repeat pregnancies in adolescence. A multi-streamed, mixed-methods systematic review was conducted searching 11 major electronic databases and 9 additional databases from 1995 onwards, using key terms such as pregnancy, teen or adolescent. The principles of realist synthesis were applied to all included literature to uncover theories about what works, for whom, how and in what context. Initial theory areas were developed through evidence scoping, group discussion by the authors and stakeholder engagement to uncover context + mechanism = outcome (CMO) configurations and related narratives. The searches identified 8,664 documents initially, and 403 in repeat searches, filtering to 81 included studies, including qualitative studies, randomised controlled trials, quantitative studies and grey literature. Three CMO configurations were developed. The individual experiences of young mothers' triggered self-efficacy, notions of perceived risks, susceptibility and benefits of pregnancy, resulting in the adolescent taking control of their fertility and sexual encounters. The choice between motherhood and other goals triggered notions of motivations, resulting in the adolescent managing their expectations of motherhood and controlling their fertility and sexual encounters. Barriers and facilitators to accessing services triggered notions of connectedness and self-determination; resulting in interventions that are tailored so they are relevant to young

  15. Synaptic plasticity and memory functions achieved in a WO3−x-based nanoionics device by using the principle of atomic switch operation

    International Nuclear Information System (INIS)

    Yang, Rui; Terabe, Kazuya; Yao, Yiping; Tsuruoka, Tohru; Hasegawa, Tsuyoshi; Gimzewski, James K; Aono, Masakazu

    2013-01-01

    A compact neuromorphic nanodevice with inherent learning and memory properties emulating those of biological synapses is the key to developing artificial neural networks rivaling their biological counterparts. Experimental results showed that memorization with a wide time scale from volatile to permanent can be achieved in a WO 3−x -based nanoionics device and can be precisely and cumulatively controlled by adjusting the device’s resistance state and input pulse parameters such as the amplitude, interval, and number. This control is analogous to biological synaptic plasticity including short-term plasticity, long-term potentiation, transition from short-term memory to long-term memory, forgetting processes for short- and long-term memory, learning speed, and learning history. A compact WO 3−x -based nanoionics device with a simple stacked layer structure should thus be a promising candidate for use as an inorganic synapse in artificial neural networks due to its striking resemblance to the biological synapse. (paper)

  16. Modeling and simulation of thermoelectric device working as a heat pump and an electric generator under Mediterranean climate

    International Nuclear Information System (INIS)

    Al-Nimr, Moh'd A.; Tashtoush, Bourhan M.; Jaradat, Ahmad A.

    2015-01-01

    This paper presents a study of a small thermoelectric device used primarily as a heat pump and secondarily as an electricity generator when space heating and cooling are not required and incident solar radiation is sufficient. As a power generator, the thermoelectric device is integrated with an evacuated solar collector to utilize solar power. Performance of the thermoelectric device as a heat pump and as an electric generator is simulated using MATLAB/SIMULINK. The purpose of this study is to estimate the energy savings from using the thermoelectric device in its electricity generation mode. The potential of energy saving because of this electricity generation mode function, has been examined in three different cases. These cases represent the operation of the dual mode thermoelectric system in typical home, school and office buildings in the Mediterranean region. In addition, the effects of different parameters, such as the solar radiation and ambient conditions, on the device performance were investigated for both modes as well as parameters related to the device itself. Furthermore, hours of operation were estimated and the economic feasibility of the device was evaluated. Results of this study include performance curves of the thermoelectric device in both modes as well as the estimation of the payback period for Mediterranean regions. - Highlights: • A thermoelectric device in dual mode integrated with an evacuated tube is studied. • The device is used as a heat pump and as an electricity generator. • Performance curves describing the behavior of the system have been resulted. • Energy saving by the system are calculated and presented for a period of one year. • Economic analysis of the system has been included.

  17. First-Principles Investigations of the Working Mechanism of 2D h-BN as an Interfacial Layer for the Anode of Lithium Metal Batteries.

    Science.gov (United States)

    Shi, Le; Xu, Ao; Zhao, Tianshou

    2017-01-18

    An issue with the use of metallic lithium as an anode material for lithium-based batteries is dendrite growth, causing a periodic breaking and repair of the solid electrolyte interphase (SEI) layer. Adding 2D atomic crystals, such as h-BN, as an interfacial layer between the lithium metal anode and liquid electrolyte has been demonstrated to be effective to mitigate dendrite growth, thereby enhancing the Columbic efficiency of lithium metal batteries. But the underlying mechanism leading to the reduced dendrite growth remains unknown. In this work, with the aid of first-principle calculations, we find that the interaction between the h-BN and lithium metal layers is a weak van der Waals force, and two atomic layers of h-BN are thick enough to block the electron tunneling from lithium metal to electrolyte, thus prohibiting the decomposition of electrolyte. The interlayer spacing between the h-BN and lithium metal layers can provide larger adsorption energies toward lithium atoms than that provided by bare lithium or h-BN, making lithium atoms prefer to intercalate under the cover of h-BN during the plating process. The combined high stiffness of h-BN and the low diffusion energy barriers of lithium at the Li/h-BN interfaces induce a uniform distribution of lithium under h-BN, therefore effectively suppressing dendrite growth.

  18. Developing of students diagnostic skills for working with adolescents with deviant behavior as a factor in the ethical principle of objectivity

    Directory of Open Access Journals (Sweden)

    Busarova O.R.

    2015-11-01

    Full Text Available The aim of the present article was to study the question of do special exercises for the formation of students-psychologists skills determine the causes of deviant behavior of adolescents, based on the provisions of the causal approach in psycho-diagnostics A. F. Anufrieva, the principle of objectivity. The study involved 30 future psychologists. After performing the exercises in the course "Psychodiagnostics" the students solved the task, which simulates diagnostic work of the psychologist with decriminalised teenager with deviant behavior. Students were asked to solve a problem in professional discourse – to put forward hypotheses about the causes of deviant behavior in everyday life is to point out the culprits of the situation. Additionally, students assessed their similarity with the hero of the diagnostic event. The results show that students who have managed to build up diagnostic skills to identify psychological causes of deviant behavior, both professionally and in everyday discourse grappled with the task model, regardless of the number of subjective similarities with her character. Students who have not sufficiently developed diagnostic skills, to avoid bias failed.

  19. A shared statement of ethical principles for those who shape and give health care: a working draft from the Tavistock group.

    Science.gov (United States)

    Smith, R; Hiatt, H; Berwick, D

    1999-01-19

    Health care delivery in many countries has expanded over the past 150 years from a largely social service delivered by individual practitioners to an intricate network of services provided by teams of professionals. The problems of increasing resource consumption, financial constraints, complexity, and poor system design that have emerged as consequences of these changes have exacerbated many of the ethical tensions inherent in health care and have created new ones. Many groups of professionals that give and affect health care have established separate codes of ethics for their own disciplines, but no shared code exists that might bring all stakeholders in health care into a more consistent moral framework. A multidisciplinary group therefore recently met at Tavistock Square in London in an effort to prepare such a shared code. The result was not a code but a more basic and generic statement of ethical principles. The intent and hope is that it will offer clear guidance for tough calls in real world settings. It is presented here not as a finished work, but as a draft to elicit comment, critique, suggestions for revision, and, especially, ideas for implementation.

  20. Accountability Principles for Research Organizations | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2011-10-28

    Oct 28, 2011 ... Accountability Principles of Research Organisations provides a ... good practices and principles for policy-oriented research organizations working in developing countries. ... Image. IDRC. Accountability Principles of Research Organisations ... The Association for Progressive Communications Women's ...

  1. The method and device for thermoregulation and optimization of dental material′s quality and working time

    Directory of Open Access Journals (Sweden)

    Sajjad Ashnagar

    2016-01-01

    Full Text Available Introduction: No one can cast a shadow of doubt on the fact that temperature is a key element in dentistry. Temperature control enable dentists in a variety of clinical fields to perform more convenient. Frozen slab is a known method for manipulating temperature before mixing cements. But lack of precise temperature and infection control is bolded. Clinical innovation: The present apparatus determines a method for temperature control in routine dentistry tasks; namely restorative dentistry, prosthesis and even injections. This device is capable of whether heating or cooling materials using low voltage electricity. Peltier or thermoelectric effect is the mechanism behind this device. As operator sets a temperature, device would provide it via metal pads arranged on it in seconds. Discussion: Other common methods used in dentistry have some issues regarding power usage, infection control, size and etc. However, this device is small, cost effective, simple to use and has fast action. Infection control can be actively be maintained with it. This device is a promising alternative for this purpose. Present manuscript summarizes device properties and its potential utilities in dentistry.

  2. From silicon to organic nanoparticle memory devices.

    Science.gov (United States)

    Tsoukalas, D

    2009-10-28

    After introducing the operational principle of nanoparticle memory devices, their current status in silicon technology is briefly presented in this work. The discussion then focuses on hybrid technologies, where silicon and organic materials have been combined together in a nanoparticle memory device, and finally concludes with the recent development of organic nanoparticle memories. The review is focused on the nanoparticle memory concept as an extension of the current flash memory device. Organic nanoparticle memories are at a very early stage of research and have not yet found applications. When this happens, it is expected that they will not directly compete with mature silicon technology but will find their own areas of application.

  3. Principles of dynamics

    CERN Document Server

    Hill, Rodney

    2013-01-01

    Principles of Dynamics presents classical dynamics primarily as an exemplar of scientific theory and method. This book is divided into three major parts concerned with gravitational theory of planetary systems; general principles of the foundations of mechanics; and general motion of a rigid body. Some of the specific topics covered are Keplerian Laws of Planetary Motion; gravitational potential and potential energy; and fields of axisymmetric bodies. The principles of work and energy, fictitious body-forces, and inertial mass are also looked into. Other specific topics examined are kinematics

  4. Electrical principles 3 checkbook

    CERN Document Server

    Bird, J O

    2013-01-01

    Electrical Principles 3 Checkbook aims to introduce students to the basic electrical principles needed by technicians in electrical engineering, electronics, and telecommunications.The book first tackles circuit theorems, single-phase series A.C. circuits, and single-phase parallel A.C. circuits. Discussions focus on worked problems on parallel A.C. circuits, worked problems on series A.C. circuits, main points concerned with D.C. circuit analysis, worked problems on circuit theorems, and further problems on circuit theorems. The manuscript then examines three-phase systems and D.C. transients

  5. Recommendations from Gynaecological (GYN) GEC-ESTRO Working Group (IV): Basic principles and parameters for MR imaging within the frame of image based adaptive cervix cancer brachytherapy

    International Nuclear Information System (INIS)

    Dimopoulos, Johannes C.A.; Petrow, Peter; Tanderup, Kari; Petric, Primoz; Berger, Daniel; Kirisits, Christian; Pedersen, Erik M.; Limbergen, Erik van; Haie-Meder, Christine; Pötter, Richard

    2012-01-01

    The GYN GEC-ESTRO working group issued three parts of recommendations and highlighted the pivotal role of MRI for the successful implementation of 3D image-based cervical cancer brachytherapy (BT). The main advantage of MRI as an imaging modality is its superior soft tissue depiction quality. To exploit the full potential of MRI for the better ability of the radiation oncologist to make the appropriate choice for the BT application technique and to accurately define the target volumes and the organs at risk, certain MR imaging criteria have to be fulfilled. Technical requirements, patient preparation, as well as image acquisition protocols have to be tailored to the needs of 3D image-based BT. The present recommendation is focused on the general principles of MR imaging for 3D image-based BT. Methods and parameters have been developed and progressively validated from clinical experience from different institutions (IGR, Universities of Vienna, Leuven, Aarhus and Ljubljana) and successfully applied during expert meetings, contouring workshops, as well as within clinical and interobserver studies. It is useful to perform pelvic MRI scanning prior to radiotherapy (“Pre-RT-MRI examination”) and at the time of BT (“BT MRI examination”) with one MR imager. Both low and high-field imagers, as well as both open and close magnet configurations conform to the requirements of 3D image-based cervical cancer BT. Multiplanar (transversal, sagittal, coronal and oblique image orientation) T2-weighted images obtained with pelvic surface coils are considered as the golden standard for visualisation of the tumour and the critical organs. The use of complementary MRI sequences (e.g. contrast-enhanced T1-weighted or 3D isotropic MRI sequences) is optional. Patient preparation has to be adapted to the needs of BT intervention and MR imaging. It is recommended to visualise and interpret the MR images on dedicated DICOM-viewer workstations, which should also assist the contouring

  6. Regulatory decision making in the presence of uncertainty in the context of the disposal of long lived radioactive wastes. Third report of the Working group on principles and criteria for radioactive waste disposal

    International Nuclear Information System (INIS)

    1997-10-01

    Plans for disposing of radioactive wastes have raised a number of unique and mostly philosophical problems, mainly due to the very long time-scales which have to be considered. While there is general agreement on disposal concepts and on many aspects of a safety philosophy, consensus on a number of issues remains to be achieved. The IAEA established a subgroup under the International Radioactive Waste Management Advisory Committee (INWAC). The subgroup started its work in 1991 as the ''INWAC Subgroup on Principles and Criteria for Radioactive Waste Disposal''. With the reorganization in 1995 of IAEA senior advisory committees in the nuclear safety area, the title of the group was changed to ''Working Group on Principles and Criteria for Radioactive Waste Disposal''. The working group is intended to provide an open forum for: (1) the discussion and resolution of contentious issues, especially those with an international component, in the area of principles and criteria for safe disposal of waste; (2) the review and analysis of new ideas and concepts in the subject area; (3) establishing areas of consensus; (4) the consideration of issues related to safety principles and criteria in the IAEA's Radioactive Waste Safety Standards (RADWASS) programme; (5) the exchange of information on national safety criteria and policies for radioactive waste disposal. This is the third report of the working group and it deals with the subject of regulatory decision making under conditions of uncertainty which is a matter of concern with respect to disposal of radioactive wastes underground. 14 refs

  7. Medical Device Safety

    Science.gov (United States)

    A medical device is any product used to diagnose, cure, or treat a condition, or to prevent disease. They ... may need one in a hospital. To use medical devices safely Know how your device works. Keep ...

  8. Research status of wave energy conversion (WEC) device of raft structure

    Science.gov (United States)

    Dong, Jianguo; Gao, Jingwei; Tao, Liang; Zheng, Peng

    2017-10-01

    This paper has briefly described the concept of wave energy generation and six typical conversion devices. As for raft structure, detailed analysis is provided from its development process to typical devices. Taking the design process and working principle of Plamis as an example, the general principle of raft structure is briefly described. After that, a variety of raft structure models are introduced. Finally, the advantages and disadvantages, and development trend of raft structure are pointed out.

  9. Variational principles

    CERN Document Server

    Moiseiwitsch, B L

    2004-01-01

    This graduate-level text's primary objective is to demonstrate the expression of the equations of the various branches of mathematical physics in the succinct and elegant form of variational principles (and thereby illuminate their interrelationship). Its related intentions are to show how variational principles may be employed to determine the discrete eigenvalues for stationary state problems and to illustrate how to find the values of quantities (such as the phase shifts) that arise in the theory of scattering. Chapter-by-chapter treatment consists of analytical dynamics; optics, wave mecha

  10. Development of digital device based work verification system for cooperation between main control room operators and field workers in nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Seung Min, E-mail: jewellee@kaeri.re.kr [Korea Atomic Energy Research Institute, 305-353, 989-111 Daedeok-daero, Yuseong-gu, Daejeon (Korea, Republic of); Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 373-1, Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Lee, Hyun Chul, E-mail: leehc@kaeri.re.kr [Korea Atomic Energy Research Institute, 305-353, 989-111 Daedeok-daero, Yuseong-gu, Daejeon (Korea, Republic of); Ha, Jun Su, E-mail: junsu.ha@kustar.ac.ae [Department of Nuclear Engineering, Khalifa University of Science Technology and Research, Abu Dhabi P.O. Box 127788 (United Arab Emirates); Seong, Poong Hyun, E-mail: phseong@kaist.ac.kr [Department of Nuclear and Quantum Engineering, Korea Advanced Institute of Science and Technology, 373-1, Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

    2016-10-15

    Highlights: • A digital device-based work verification and cooperation support system was developed. • Requirements were derived by interviewing field operators having experiences with mobile-based work support systems. • The usability of the proposed system was validated by conducting questionnaire surveys. • The proposed system will be useful if the manual or the set of guidelines is well constructed. - Abstract: Digital technologies have been applied in the nuclear field to check task results, monitor events and accidents, and transmit/receive data. The results of using digital devices have proven that these devices can provide high accuracy and convenience for workers, allowing them to obtain obvious positive effects by reducing their workloads. In this study, as one step forward, a digital device-based cooperation support system, the nuclear cooperation support and mobile documentation system (Nu-COSMOS), is proposed to support communication between main control room (MCR) operators and field workers by verifying field workers’ work results in nuclear power plants (NPPs). The proposed system consists of a mobile based information storage system to support field workers by providing various functions to make workers more trusted by MCR operators; also to improve the efficiency of meeting, and a large screen based information sharing system supports meetings by allowing both sides to share one medium. The usability of this system was estimated by interviewing field operators working in nuclear power plants and experts who have experience working as operators. A survey to estimate the usability of the suggested system and the suitability of the functions of the system for field working was conducted for 35 subjects who have experience in field works or with support system development-related research. The usability test was conducted using the system usability scale (SUS), which is widely used in industrial usability evaluation. Using questionnaires

  11. Development of digital device based work verification system for cooperation between main control room operators and field workers in nuclear power plants

    International Nuclear Information System (INIS)

    Lee, Seung Min; Lee, Hyun Chul; Ha, Jun Su; Seong, Poong Hyun

    2016-01-01

    Highlights: • A digital device-based work verification and cooperation support system was developed. • Requirements were derived by interviewing field operators having experiences with mobile-based work support systems. • The usability of the proposed system was validated by conducting questionnaire surveys. • The proposed system will be useful if the manual or the set of guidelines is well constructed. - Abstract: Digital technologies have been applied in the nuclear field to check task results, monitor events and accidents, and transmit/receive data. The results of using digital devices have proven that these devices can provide high accuracy and convenience for workers, allowing them to obtain obvious positive effects by reducing their workloads. In this study, as one step forward, a digital device-based cooperation support system, the nuclear cooperation support and mobile documentation system (Nu-COSMOS), is proposed to support communication between main control room (MCR) operators and field workers by verifying field workers’ work results in nuclear power plants (NPPs). The proposed system consists of a mobile based information storage system to support field workers by providing various functions to make workers more trusted by MCR operators; also to improve the efficiency of meeting, and a large screen based information sharing system supports meetings by allowing both sides to share one medium. The usability of this system was estimated by interviewing field operators working in nuclear power plants and experts who have experience working as operators. A survey to estimate the usability of the suggested system and the suitability of the functions of the system for field working was conducted for 35 subjects who have experience in field works or with support system development-related research. The usability test was conducted using the system usability scale (SUS), which is widely used in industrial usability evaluation. Using questionnaires

  12. Safety Principles

    Directory of Open Access Journals (Sweden)

    V. A. Grinenko

    2011-06-01

    Full Text Available The offered material in the article is picked up so that the reader could have a complete representation about concept “safety”, intrinsic characteristics and formalization possibilities. Principles and possible strategy of safety are considered. A material of the article is destined for the experts who are taking up the problems of safety.

  13. Maquet principle

    Energy Technology Data Exchange (ETDEWEB)

    Levine, R.B.; Stassi, J.; Karasick, D.

    1985-04-01

    Anterior displacement of the tibial tubercle is a well-accepted orthopedic procedure in the treatment of certain patellofemoral disorders. The radiologic appearance of surgical procedures utilizing the Maquet principle has not been described in the radiologic literature. Familiarity with the physiologic and biochemical basis for the procedure and its postoperative appearance is necessary for appropriate roentgenographic evaluation and the radiographic recognition of complications.

  14. Cosmological principle

    International Nuclear Information System (INIS)

    Wesson, P.S.

    1979-01-01

    The Cosmological Principle states: the universe looks the same to all observers regardless of where they are located. To most astronomers today the Cosmological Principle means the universe looks the same to all observers because density of the galaxies is the same in all places. A new Cosmological Principle is proposed. It is called the Dimensional Cosmological Principle. It uses the properties of matter in the universe: density (rho), pressure (p), and mass (m) within some region of space of length (l). The laws of physics require incorporation of constants for gravity (G) and the speed of light (C). After combining the six parameters into dimensionless numbers, the best choices are: 8πGl 2 rho/c 2 , 8πGl 2 rho/c 4 , and 2 Gm/c 2 l (the Schwarzchild factor). The Dimensional Cosmological Principal came about because old ideas conflicted with the rapidly-growing body of observational evidence indicating that galaxies in the universe have a clumpy rather than uniform distribution

  15. Soft magnetic tweezers: a proof of principle.

    Science.gov (United States)

    Mosconi, Francesco; Allemand, Jean François; Croquette, Vincent

    2011-03-01

    We present here the principle of soft magnetic tweezers which improve the traditional magnetic tweezers allowing the simultaneous application and measurement of an arbitrary torque to a deoxyribonucleic acid (DNA) molecule. They take advantage of a nonlinear coupling regime that appears when a fast rotating magnetic field is applied to a superparamagnetic bead immersed in a viscous fluid. In this work, we present the development of the technique and we compare it with other techniques capable of measuring the torque applied to the DNA molecule. In this proof of principle, we use standard electromagnets to achieve our experiments. Despite technical difficulties related to the present implementation of these electromagnets, the agreement of measurements with previous experiments is remarkable. Finally, we propose a simple way to modify the experimental design of electromagnets that should bring the performances of the device to a competitive level.

  16. Properties study of LiNbO3 lateral field excited device working on thickness extension mode

    International Nuclear Information System (INIS)

    Zhi-Tian, Zhang; Ting-Feng, Ma; Chao, Zhang; Wen-Yan, Wang; Yan, Liu; Guan-Ping, Feng

    2010-01-01

    This paper investigates the properties of thickness extension mode excited by lateral electric field on LiNbO 3 by using the extended Christoffel–Bechmann method. It finds that the lateral field excitation coupling factor for a-mode (quasi-extensional mode) reaches its maximum value of 28% on X-cut LiNbO 3 . The characteristics of a lateral field excitation device made of X-cut LiNbO 3 have been investigated and the lateral field excitation device is used for the design of a high frequency ultrasonic transducer. The time and frequency domain pulse/echo response of the LiNbO 3 lateral field excitation ultrasonic transducer is analysed with the modified Krimholtz–Leedom–Matthae model and tested using traditional pulse/echo method. A LiNbO 3 lateral field excitation ultrasonic transducer with the centre frequency of 33.44 MHz and the −6 dB bandwidth of 33.8% is acquired, which is in good agreement with the results of the Krimholtz–Leedom–Matthae model. Further analysis suggests that the LiNbO 3 lateral field excitation device has great potential in the design of broadband high frequency ultrasonic transducers. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

  17. Design of a leak detection device for marine airtight container

    Science.gov (United States)

    Li, Yuan; Zhu, Faxin; Lu, Jinshu; Li, Yule; Wu, Wenfeng; Zhang, Jianwei; Qin, Beichen

    2018-04-01

    The ship airtight container as the research object, according to the tightness of the traditional detection methods of sealed container from the shortcomings of the design of modern ship sealed container leak detection device based on the requirements of the use of AutoCAD to design a ship leakage detection device using airtight container, and introduces its working principle and main components. Finally, from the aspects of technology, structure, operation and economy, the feasibility analysis of the leak detection device for marine airtight container is designed, and it is concluded that the device has the advantages of simple operation, short detection time, easy maintenance and cost control, and has high feasibility.

  18. The Bohr Correspondence Principle

    Indian Academy of Sciences (India)

    IAS Admin

    Deepak Dhar. Keywords. Correspondence principle, hy- drogen atom, Kepler orbit. Deepak Dhar works at the. Tata Institute of Funda- mental Research,. Mumbai. His research interests are mainly in the area of statistical physics. We consider the quantum-mechanical non-relati- vistic hydrogen atom. We show that for bound.

  19. The uncertainty principle

    International Nuclear Information System (INIS)

    Martens, Hans.

    1991-01-01

    The subject of this thesis is the uncertainty principle (UP). The UP is one of the most characteristic points of differences between quantum and classical mechanics. The starting point of this thesis is the work of Niels Bohr. Besides the discussion the work is also analyzed. For the discussion of the different aspects of the UP the formalism of Davies and Ludwig is used instead of the more commonly used formalism of Neumann and Dirac. (author). 214 refs.; 23 figs

  20. Principles of photonics

    CERN Document Server

    Liu, Jia-Ming

    2016-01-01

    With this self-contained and comprehensive text, students will gain a detailed understanding of the fundamental concepts and major principles of photonics. Assuming only a basic background in optics, readers are guided through key topics such as the nature of optical fields, the properties of optical materials, and the principles of major photonic functions regarding the generation, propagation, coupling, interference, amplification, modulation, and detection of optical waves or signals. Numerous examples and problems are provided throughout to enhance understanding, and a solutions manual containing detailed solutions and explanations is available online for instructors. This is the ideal resource for electrical engineering and physics undergraduates taking introductory, single-semester or single-quarter courses in photonics, providing them with the knowledge and skills needed to progress to more advanced courses on photonic devices, systems and applications.

  1. Unconventional Quantum Computing Devices

    OpenAIRE

    Lloyd, Seth

    2000-01-01

    This paper investigates a variety of unconventional quantum computation devices, including fermionic quantum computers and computers that exploit nonlinear quantum mechanics. It is shown that unconventional quantum computing devices can in principle compute some quantities more rapidly than `conventional' quantum computers.

  2. [Industry regulation and its relationship to the rapid marketing of medical devices].

    Science.gov (United States)

    Matsuoka, Atsuko

    2012-01-01

    In the market of medical devices, non-Japanese products hold a large part even in Japan. To overcome this situation, the Japanese government has been announcing policies to encourage the medical devices industry, such as the 5-year strategy for medical innovation (June 6, 2012). The Division of Medical Devices has been contributing to rapid marketing of medical devices by working out the standards for approval review and accreditation of medical devices, guidances on evaluation of medical devices with emerging technology, and test methods for biological safety evaluation of medical devices, as a part of practice in the field of regulatory science. The recent outcomes are 822 standards of accreditation for Class II medical devices, 14 guidances on safety evaluation of medical devices with emerging technology, and the revised test methods for biological safety evaluation (MHLW Notification by Director, OMDE, Yakushokuki-hatsu 0301 No. 20 "Basic Principles of Biological Safety Evaluation Required for Application for Approval to Market Medical Devices").

  3. Mechanical engineering principles

    CERN Document Server

    Bird, John

    2014-01-01

    A student-friendly introduction to core engineering topicsThis book introduces mechanical principles and technology through examples and applications, enabling students to develop a sound understanding of both engineering principles and their use in practice. These theoretical concepts are supported by 400 fully worked problems, 700 further problems with answers, and 300 multiple-choice questions, all of which add up to give the reader a firm grounding on each topic.The new edition is up to date with the latest BTEC National specifications and can also be used on undergraduate courses in mecha

  4. Principles of Optics

    Science.gov (United States)

    Born, Max; Wolf, Emil

    1999-10-01

    Principles of Optics is one of the classic science books of the twentieth century, and probably the most influential book in optics published in the past forty years. This edition has been thoroughly revised and updated, with new material covering the CAT scan, interference with broad-band light and the so-called Rayleigh-Sommerfeld diffraction theory. This edition also details scattering from inhomogeneous media and presents an account of the principles of diffraction tomography to which Emil Wolf has made a basic contribution. Several new appendices are also included. This new edition will be invaluable to advanced undergraduates, graduate students and researchers working in most areas of optics.

  5. Work Integration Social Enterprises. Devices for the promotion of social inclusion and labour activation of the most vulnerable immigrants. The case of the Basque Country

    Directory of Open Access Journals (Sweden)

    Esther Aretxabala

    2011-12-01

    Full Text Available This article highlights the role played by Work Integration Social Enterprises as mechanisms which offer jobs to people with difficulties entering the ordinary labour market through social and employment programmes which promote the employability of beneficiaries, some of whom are international immigrants. Despite their quantity, which now amounts to more than 5.7 million in Spain – the 12.2% of its population-, they make up a group that is specially exposed to social risks and levels of poverty. Such entrepreneurial devices, as transition companies for the labour activation and the social inclusion of the most vulnerable immigrants, contribute to the attainment of a more inclusive and cohesive society. We shall define the work of the Work Integration Social Enterprises in the Basque Country where the international migration is rated in the 6,6% in 2011.

  6. Zymography Principles.

    Science.gov (United States)

    Wilkesman, Jeff; Kurz, Liliana

    2017-01-01

    Zymography, the detection, identification, and even quantification of enzyme activity fractionated by gel electrophoresis, has received increasing attention in the last years, as revealed by the number of articles published. A number of enzymes are routinely detected by zymography, especially with clinical interest. This introductory chapter reviews the major principles behind zymography. New advances of this method are basically focused towards two-dimensional zymography and transfer zymography as will be explained in the rest of the chapters. Some general considerations when performing the experiments are outlined as well as the major troubleshooting and safety issues necessary for correct development of the electrophoresis.

  7. Basic principles

    International Nuclear Information System (INIS)

    Wilson, P.D.

    1996-01-01

    Some basic explanations are given of the principles underlying the nuclear fuel cycle, starting with the physics of atomic and nuclear structure and continuing with nuclear energy and reactors, fuel and waste management and finally a discussion of economics and the future. An important aspect of the fuel cycle concerns the possibility of ''closing the back end'' i.e. reprocessing the waste or unused fuel in order to re-use it in reactors of various kinds. The alternative, the ''oncethrough'' cycle, discards the discharged fuel completely. An interim measure involves the prolonged storage of highly radioactive waste fuel. (UK)

  8. PET/TAC: Basic principles, physiological variants and artifacts

    International Nuclear Information System (INIS)

    Jimenez V, A.M.

    2007-01-01

    This presentation is about the basic principles, physiologic variants and devices that work in the PET/TAC technique. Next the conclusions obtained in the same one are presented: For a correct evaluation of the PET/TAC images with FDG is necessary the knowledge of the image acquisition technique, as well as of the physiologic distribution of the FDG, variants of the normality, benign causes of captation and more frequent devices. The introduction of this hybrid procedure allows the correct anatomical localization and identification of the deposits of FDG largely avoiding false or doubtful interpretations, but it can also originate not specific devices existent in the conventional PET. The previous knowledge of the possible devices will make possible in certain cases its elimination and in other its identification avoiding incorrect interpretations. (Author)

  9. Basic principles of STT-MRAM cell operation in memory arrays

    International Nuclear Information System (INIS)

    Khvalkovskiy, A V; Apalkov, D; Watts, S; Chepulskii, R; Beach, R S; Ong, A; Tang, X; Driskill-Smith, A; Lottis, D; Chen, E; Nikitin, V; Krounbi, M; Butler, W H; Visscher, P B

    2013-01-01

    For reliable operation, individual cells of an STT-MRAM memory array must meet specific requirements on their performance. In this work we review some of these requirements and discuss the fundamental physical principles of STT-MRAM operation, covering the range from device level to chip array performance, and methodology for its development. (paper)

  10. Principles of speech coding

    CERN Document Server

    Ogunfunmi, Tokunbo

    2010-01-01

    It is becoming increasingly apparent that all forms of communication-including voice-will be transmitted through packet-switched networks based on the Internet Protocol (IP). Therefore, the design of modern devices that rely on speech interfaces, such as cell phones and PDAs, requires a complete and up-to-date understanding of the basics of speech coding. Outlines key signal processing algorithms used to mitigate impairments to speech quality in VoIP networksOffering a detailed yet easily accessible introduction to the field, Principles of Speech Coding provides an in-depth examination of the

  11. Metrological Reliability of Medical Devices

    Science.gov (United States)

    Costa Monteiro, E.; Leon, L. F.

    2015-02-01

    The prominent development of health technologies of the 20th century triggered demands for metrological reliability of physiological measurements comprising physical, chemical and biological quantities, essential to ensure accurate and comparable results of clinical measurements. In the present work, aspects concerning metrological reliability in premarket and postmarket assessments of medical devices are discussed, pointing out challenges to be overcome. In addition, considering the social relevance of the biomeasurements results, Biometrological Principles to be pursued by research and innovation aimed at biomedical applications are proposed, along with the analysis of their contributions to guarantee the innovative health technologies compliance with the main ethical pillars of Bioethics.

  12. Work Process Oriented Learning via Mobile Devices – Theoretical Basics and Examples for a (New Didactical Approach

    Directory of Open Access Journals (Sweden)

    Georg Spöttl

    2012-04-01

    Full Text Available Two problems can be identified which counteract the need for further training: On the one hand the clientele of skilled workers is not necessarily keen on further training. On the other hand the time and cost pressure within the sector does not offer any room for time-consuming further training measures far away from the workplace. This is why the project “Virtual Learning on the building site – (Vila-b” was realized in cooperation with the project partners of the University of Bremen (Working group »Digital Media« of the Centre for Information Technology as well as from the economy (Arbeitskreis ökologischer Holzbau e. V. and Claus Holm, pm|c. The project team has tested a concept which facilitated learning adapted to the occupational reality and supported by the advantages of digital media. The central didactical elements for the development of this further training course are the contextual and methodological orientation to real work processes as well as the use of digital mobile media which facilitate learning directly at the workplace. The present article starts with a description of the theoretical basics for learning within the work process and discusses the didactical elements which are necessary for work process oriented learning with digital and mobile media.

  13. The use of a website as an interaction and training device in health, gender and work in schools.

    Science.gov (United States)

    Brito, Jussara; Neves, Mary Yale; Hyppolito, Amanda Ornela; Alvarez, Denise; da Silva, Edil Ferreira; Muniz, Hélder; de Souza, Kátia Reis; França, Maristela; Athayde, Milton

    2012-01-01

    The objective of this paper is to introduce the Website "Encontros sobre a vida, a saúde e o trabalho nas escolas públicas" (Encounters of life, health and work in public schools). It was designed viewing to contribute to the generation of changes regarding the meanings attributed to work done by all professionals acting in Brazilian public schools, in their relationship to health. We have tried to create a space conducive to reflection and invention of different ways of action towards the struggle for health of the protagonists of the school units. We present the Website's different ambients, such as the one for availability of Training materials, Discussion Forums and the Observatory of facts and events related to the topic. We point out the analysis of a dialogue between the Formaction Program in Health, Gender and Work at Schools. Through the displaying of dialogs that mobilized the training participants we observed a process of collective analysis of the situations that occur at meetings, allowing other interpretation possibilities by the different parties. In the case focused, a nursery assistant (male), in the dialogue, is forced to review his description of the activity, initially, portrayed as simple.

  14. Thermionics basic principles of electronics

    CERN Document Server

    Jenkins, J; Ashhurst, W

    2013-01-01

    Basic Principles of Electronics, Volume I : Thermionics serves as a textbook for students in physics. It focuses on thermionic devices. The book covers topics on electron dynamics, electron emission, and the themionic vacuum diode and triode. Power amplifiers, oscillators, and electronic measuring equipment are studied as well. The text will be of great use to physics and electronics students, and inventors.

  15. Metal artifact reduction image reconstruction algorithm for CT of implanted metal orthopedic devices: a work in progress

    International Nuclear Information System (INIS)

    Liu, Patrick T.; Pavlicek, William P.; Peter, Mary B.; Roberts, Catherine C.; Paden, Robert G.; Spangehl, Mark J.

    2009-01-01

    Despite recent advances in CT technology, metal orthopedic implants continue to cause significant artifacts on many CT exams, often obscuring diagnostic information. We performed this prospective study to evaluate the effectiveness of an experimental metal artifact reduction (MAR) image reconstruction program for CT. We examined image quality on CT exams performed in patients with hip arthroplasties as well as other types of implanted metal orthopedic devices. The exam raw data were reconstructed using two different methods, the standard filtered backprojection (FBP) program and the MAR program. Images were evaluated for quality of the metal-cement-bone interfaces, trabeculae ≤1 cm from the metal, trabeculae 5 cm apart from the metal, streak artifact, and overall soft tissue detail. The Wilcoxon Rank Sum test was used to compare the image scores from the large and small prostheses. Interobserver agreement was calculated. When all patients were grouped together, the MAR images showed mild to moderate improvement over the FBP images. However, when the cases were divided by implant size, the MAR images consistently received higher image quality scores than the FBP images for large metal implants (total hip prostheses). For small metal implants (screws, plates, staples), conversely, the MAR images received lower image quality scores than the FBP images due to blurring artifact. The difference of image scores for the large and small implants was significant (p=0.002). Interobserver agreement was found to be high for all measures of image quality (k>0.9). The experimental MAR reconstruction algorithm significantly improved CT image quality for patients with large metal implants. However, the MAR algorithm introduced blurring artifact that reduced image quality with small metal implants. (orig.)

  16. Applying core principles to the design and evaluation of the 'Take Charge. Take the Test' campaign: what worked and lessons learned.

    Science.gov (United States)

    Fraze, J L; Uhrig, J D; Davis, K C; Taylor, M K; Lee, N R; Spoeth, S; Robinson, A; Smith, K; Johnston, J; McElroy, L

    2009-09-01

    To describe the application of seven core principles to the design and evaluation of a human immunodeficiency virus (HIV) testing social marketing campaign as a case study example. The Centers for Disease Control and Prevention (CDC) used a structured social marketing approach, informed by the Ecological Model, the Theory of Planned Behaviour and the Health Belief Model, to develop and evaluate a two-city campaign with print, radio and outdoor advertising; HIV telephone hotlines; an HIV website; community partnerships; and events to promote information seeking and HIV testing. The CDC applied seven core principles to design and evaluate the campaign, including formative research, the use of behavioural theories, audience segmentation, message design and pretesting, channel selection, process evaluation and outcome evaluation. Over 200 partners in both cities contributed significantly to campaign efforts. Key informant interviews indicated that, due to increased coordination, city infrastructures for HIV testing improved. More than 9600 individuals attended campaign events in both cities, with 1492 rapid HIV tests administered and 14 newly-identified HIV individuals. Overall, event attendees responded positively to campaign materials and events, and free HIV testing opportunities. The campaign significantly increased information-seeking behaviours in the form of hotline calls and web searches. Audience reaction and receptivity to the final campaign materials was very high. Exposure to campaign messages was associated with increases in key knowledge items, intentions to get tested, and peer-to-peer communication. The seven core principles, including formative research, behavioural theories and extensive partnerships, acted synergistically to help a campaign reach its target audience with compelling, relevant messages and motivate them to seek information and get an HIV test. Rapid testing removes many barriers by providing a testing process that can be accessed and

  17. Automation of Command and Data Entry in a Glovebox Work Volume: An Evaluation of Data Entry Devices

    Science.gov (United States)

    Steele, Marianne K.; Nakamura, Gail; Havens, Cindy; LeMay, Moira

    1996-01-01

    The present study was designed to examine the human-computer interface for data entry while performing experimental procedures within a glovebox work volume in order to make a recommendation to the Space Station Biological Research Project for a data entry system to be used within the Life Sciences Glovebox. Test subjects entered data using either a manual keypad, similar to a standard computer numerical keypad located within the glovebox work volume, or a voice input system using a speech recognition program with a microphone headset. Numerical input and commands were programmed in an identical manner between the two systems. With both electronic systems, a small trackball was available within the work volume for cursor control. Data, such as sample vial identification numbers, sample tissue weights, and health check parameters of the specimen, were entered directly into procedures that were electronically displayed on a video monitor within the glovebox. A pen and paper system with a 'flip-chart' format for procedure display, similar to that currently in use on the Space Shuttle, was used as a baseline data entry condition. Procedures were performed by a single operator; eight test subjects were used in the study. The electronic systems were tested under both a 'nominal' or 'anomalous' condition. The anomalous condition was introduced into the experimental procedure to increase the probability of finding limitations or problems with human interactions with the electronic systems. Each subject performed five test runs during a test day: two procedures each with voice and keypad, one with and one without anomalies, and one pen and paper procedure. The data collected were both quantitative (times, errors) and qualitative (subjective ratings of the subjects).

  18. Discharge amplified photo-emission from ultra-thin films applied to tuning work function of transparent electrodes in organic opto-electronic devices

    International Nuclear Information System (INIS)

    Gentle, A.R.; Smith, G.B.; Watkins, S.E.

    2013-01-01

    A novel photoemission technique utilising localised discharge amplification of photo-yield is reported. It enables fast, accurate measurement of work function and ionisation potential for ultra-thin buffer layers vacuum deposited onto single and multilayer transparent conducting electrodes for organic solar cells and OLED's. Work function in most traditional transparent electrodes has to be raised to maximise charge transfer while high transmittance and high conductance must be retained. Results are presented for a range of metal oxide buffers, which achieve this goal. This compact photo-yield spectroscopy tool with its fast turn-around has been a valuable development aid since ionisation potential can vary significantly as deposition conditions change slightly, and as ultra-thin films grow. It has also been useful in tracking the impact of different post deposition cleaning treatments along with some storage and transport protocols, which can adversely reduce ionisation potential and hence subsequent device performance.

  19. Applying principles of self-management to facilitate workers to return to or remain at work with a chronic musculoskeletal condition.

    Science.gov (United States)

    Johnston, Venerina; Jull, Gwendolen; Sheppard, Dianne M; Ellis, Niki

    2013-08-01

    It is incumbent on health care professionals to support patients with chronic musculoskeletal conditions to manage the impact of the condition on their life. Work is a positive health behaviour for which self-management skills are essential. In this paper, self-management is defined and the role of clinicians in promoting self-management for return to work is outlined with examples and tips on how the clinician can incorporate self-management into practice. The clinician is ideally placed to assist individuals with chronic musculoskeletal conditions manage to remain at work or return to work. This can be achieved through such activities as the promotion of the core self-management skills of problem-solving, decision making, resource utilisation, developing a cooperative partnership between clinician and patient and making an action plan. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. PREFERENCE, PRINCIPLE AND PRACTICE

    DEFF Research Database (Denmark)

    Skovsgaard, Morten; Bro, Peter

    2011-01-01

    Legitimacy has become a central issue in journalism, since the understanding of what journalism is and who journalists are has been challenged by developments both within and outside the newsrooms. Nonetheless, little scholarly work has been conducted to aid conceptual clarification as to how jou...... distinct, but interconnected categories*preference, principle, and practice. Through this framework, historical attempts to justify journalism and journalists are described and discussed in the light of the present challenges for the profession....

  1. 5. The Basic Principles of The Working Process From Nature and the Role of Composition in Creating Landscape in Terms of Plein-Air

    Directory of Open Access Journals (Sweden)

    Savițkaia-Baraghin Iarîna

    2017-03-01

    Full Text Available Principles of possession of the landscape painting, applied by masters of the past, as well as theoretical elaborations of scientists in the field of chromatics, psychology and pedagogy of arts, become important components in improving training methods of artists in plein-air in contemporary conditions. The skills and knowledge gained in the process of pleinair studies form professional skills and improve the properties of painting and composition within the workshop. This studying outlines the stringency of training and development methods of creative individuality, especially in plein-air, where the principal teacher is the nature. The plein-air enriches color perception of the real world, located in the air, and mutual relationship of landscape with architecture and space determines knowledge of the issues of proportionality and subordination in compositions, educates sense of proportion and artistic taste. Improving visual mastery into the natural environment contributes to the formation to painters of the necessity to create outside the workshop, which is a necessary condition for the development of individuality and professional skills of the painter.

  2. Communication of 12 June 2009 received from the Permanent Missions of Germany and the Russian Federation with regard to a working paper 'Principles of fuel supply guarantees and the multilateralization of fuel cycle activities'

    International Nuclear Information System (INIS)

    2009-01-01

    The Secretariat has received a communication dated 12 June 2009 from the Permanent Missions of Germany and the Russian Federation, transmitting the text of the working paper 'Principles of fuel supply guarantees and the multilateralization of fuel cycle activities' submitted by Germany and the Russian Federation to the Preparatory Committee for the 2010 Review Conference of the Parties to the Treaty on the Non-Proliferation of Nuclear Weapons. As requested in that communication, the abovementioned paper is herewith circulated for the information of all Member States

  3. Fundamental Safety Principles

    International Nuclear Information System (INIS)

    Abdelmalik, W.E.Y.

    2011-01-01

    This work presents a summary of the IAEA Safety Standards Series publication No. SF-1 entitled F UDAMENTAL Safety PRINCIPLES p ublished on 2006. This publication states the fundamental safety objective and ten associated safety principles, and briefly describes their intent and purposes. Safety measures and security measures have in common the aim of protecting human life and health and the environment. These safety principles are: 1) Responsibility for safety, 2) Role of the government, 3) Leadership and management for safety, 4) Justification of facilities and activities, 5) Optimization of protection, 6) Limitation of risks to individuals, 7) Protection of present and future generations, 8) Prevention of accidents, 9)Emergency preparedness and response and 10) Protective action to reduce existing or unregulated radiation risks. The safety principles concern the security of facilities and activities to the extent that they apply to measures that contribute to both safety and security. Safety measures and security measures must be designed and implemented in an integrated manner so that security measures do not compromise safety and safety measures do not compromise security.

  4. What works for wellbeing in culture and sport? Report of a DELPHI process to support coproduction and establish principles and parameters of an evidence review.

    Science.gov (United States)

    Daykin, Norma; Mansfield, Louise; Payne, Annette; Kay, Tess; Meads, Catherine; D'Innocenzo, Giorgia; Burnett, Adele; Dolan, Paul; Julier, Guy; Longworth, Louise; Tomlinson, Alan; Testoni, Stefano; Victor, Christina

    2017-09-01

    There is a growing recognition of the ways in which culture and sport can contribute to wellbeing. A strong evidence base is needed to support innovative service development and a 3-year research programme is being undertaken to capture best evidence of wellbeing impacts and outcomes of cultural and sporting activities in order to inform UK policy and practice. This article provides an overview of methods and findings from an initial coproduction process with key stakeholders that sought to explore and agree principles and parameters of the evidence review for culture, sport and wellbeing (CSW). A two-stage DELPHI process was conducted with a purposeful sample of 57 stakeholders between August and December 2015. Participants were drawn from a range of culture and sport organisations and included commissioners and managers, policy makers, representatives of service delivery organisations (SDOs) and scholars. The DELPHI 1 questionnaire was developed from extensive consultation in July and August 2015. It explored definitions of wellbeing, the role of evidence, quality assessment, and the culture and sport populations, settings and interventions that are most likely to deliver wellbeing outcomes. Following further consultation, the results, presented as a series of ranked statements, were sent back to participants (DELPHI 2), which allowed them to reflect on and, if they wished, express agreement or disagreement with the emerging consensus. A total of 40 stakeholders (70.02%) responded to the DELPHI questionnaires. DELPHI 1 mapped areas of agreement and disagreement, confirmed in DELPHI 2. The exercise drew together the key priorities for the CSW evidence review. The DELPHI process, in combination with face-to-face deliberation, enabled stakeholders to engage in complex discussion and express nuanced priorities while also allowing the group to come to an overall consensus and agree outcomes. The results will inform the CSW evidence review programme until its

  5. Working Together to Achieve Greater Impact: The Donors' Education Collaborative of New York City. Principles for Effective Education Grantmaking. Case in Brief Number 3

    Science.gov (United States)

    Grantmakers for Education, 2012

    2012-01-01

    Since the mid-1990s, constituency building and advocacy for better public education have grown steadily in New York City. "Working Together to Achieve Greater Impact" explores how that growth was fueled by the Donors' Education Collaborative of New York, which pools its members' financial resources and expertise to advance shared…

  6. Fiber optics principles and practices

    CERN Document Server

    Al-Azzawi, Abdul

    2007-01-01

    Since the invention of the laser, our fascination with the photon has led to one of the most dynamic and rapidly growing fields of technology. New advances in fiber optic devices, components, and materials make it more important than ever to stay current. Comprising chapters drawn from the author's highly anticipated book Photonics: Principles and Practices, Fiber Optics: Principles and Practices offers a detailed and focused treatment for anyone in need of authoritative information on this critical area underlying photonics.Using a consistent approach, the author leads you step-by-step throug

  7. Cooperative Learning Principles Enhance Online Interaction

    Science.gov (United States)

    Jacobs, George; Seow, Peter

    2014-01-01

    This paper describes eight principles that can be used to promote cooperative interactions among students working in online environments. The principles derive from a well-established approach to education, known variously as cooperative learning and collaborative learning. Each principle is explained as to what it means, why it is important and…

  8. Principles of geodynamics

    CERN Document Server

    Scheidegger, Adrian E

    1982-01-01

    Geodynamics is commonly thought to be one of the subjects which provide the basis for understanding the origin of the visible surface features of the Earth: the latter are usually assumed as having been built up by geodynamic forces originating inside the Earth ("endogenetic" processes) and then as having been degrad­ ed by geomorphological agents originating in the atmosphere and ocean ("exogenetic" agents). The modem view holds that the sequence of events is not as neat as it was once thought to be, and that, in effect, both geodynamic and geomorphological processes act simultaneously ("Principle of Antagonism"); however, the division of theoretical geology into the principles of geodynamics and those of theoretical geomorphology seems to be useful for didactic purposes. It has therefore been maintained in the present writer's works. This present treatise on geodynamics is the first part of the author's treatment of theoretical geology, the treatise on Theoretical Geomorphology (also published by the Sprin...

  9. [A qualitative study to validate the Work and Career (Santé et Itinéraire Professionnel) statistical survey: principles and methods].

    Science.gov (United States)

    Guiho-Bailly, Marie-Pierre; Roquelaure, Yves

    2013-01-01

    The population-based survey "Santé et itinéraire professionnel" (SIP) aims to investigate the relationship between health and career. A qualitative study was conducted to identify potential biases in the design of the questionnaire. The Laboratoire d'ergonomie et d'épidémiologie en santé au travail (research center on "Ergonomics and Epidemiology in Occupational Health" based at the University of Angers, France) recently conducted a study entitled "Rapport subjectif au travail, sens des trajets professionnels et construction de la santé" ("The subjective perception of work, career paths and the construction of health"). Individual interviews were conducted with thirty survey respondents (irrespective of whether they had reported any health problems or established a link between a health event and their career path) by two experts in the psychodynamics of work. The analysis of the clinical and statistical data involved four stages: a study of an initial test case, a comparison of monographs and reports drawn up by the DREES/DARES, an analysis of questionnaire responses, and an analysis of thirty monographs. MAIN RESULTS AND DISCUSSION: After an examination of the results in relation to sample composition and the method used, the study shows that the relationship between health and career is not overestimated, but also indicates that psychological and musculoskeletal disorders and "minor" work accidents tend to be underreported. The study also found a loss of information about professional mobility as a way of maintaining health. Based on a qualitative approach to validation, the proposed method provides a basis for assessing the design of the questionnaire and provides reference points for data interpretation and the direction of future research.

  10. Gesture & Principle

    DEFF Research Database (Denmark)

    Hvejsel, Marie Frier

    2017-01-01

    The development of architecture is governed by an increasing gap between the experienced quality of architectural space, manifest as a sense of interiority on behalf of the user, and the means applied in its realization. Between means and ends, one could say, which calls for a continuous...... and critical development of architectural method. By method, I mean a systematic series of steps taken to acquire knowledge about an architectural problem. As the building industry and the actual construction of architecture is becoming ever more complex moving from craft over industrialization through...... to integration of digital technologies, the mentioned gap is becoming present in the processes and models of collaborations between the multiple parties involved in the realization of architecture, as well as in the work itself. This, as an increase of construction layers, installations and equipment tending...

  11. The gauge principle vs. the equivalence principle

    International Nuclear Information System (INIS)

    Gates, S.J. Jr.

    1984-01-01

    Within the context of field theory, it is argued that the role of the equivalence principle may be replaced by the principle of gauge invariance to provide a logical framework for theories of gravitation

  12. Implantable optical-electrode device for stimulation of spinal motoneurons

    International Nuclear Information System (INIS)

    Matveev, M V; Erofeev, A I; Zakharova, O A; Vlasova, O L; Pyatyshev, E N; Kazakin, A N

    2016-01-01

    Recent years, optogenetic method of scientific research has proved its effectiveness in the nerve cell stimulation tasks. In our article we demonstrate an implanted device for the spinal optogenetic motoneurons activation. This work is carried out in the Laboratory of Molecular Neurodegeneration of the Peter the Great St. Petersburg Polytechnic University, together with Nano and Microsystem Technology Laboratory. The work of the developed device is based on the principle of combining fiber optic light stimulation of genetically modified cells with the microelectrode multichannel recording of neurons biopotentials. The paper presents a part of the electrode implant manufacturing technique, combined with the optical waveguide of ThorLabs (USA). (paper)

  13. Cesium-incorporated indium-tin-oxide films for use as a cathode with low work function for a transparent organic light-emitting device

    International Nuclear Information System (INIS)

    Uchida, Takayuki; Mimura, Toshifumi; Ohtsuka, Masao; Otomo, Toshio; Ide, Mieko; Shida, Azusa; Sawada, Yutaka

    2006-01-01

    Transparent organic light-emitting devices (TOLEDs) were successfully fabricated utilizing a novel transparent conducting cathode with low work function. Cesium-incorporated indium-tin-oxide film was deposited on the organic layers with negligible damage by simultaneous operation of RF magnetron sputtering using an ITO target and vacuum evaporation of metallic cesium. Incorporation of cesium in the ITO film was confirmed by XPS analysis. The work function (4.3 eV) determined by photoelectron spectroscopy in air (PESA) was lower than that of 0.3-0.4-eV without cesium-incorporation and stable under the atmospheric environment. The electron injection efficiency of cesium-incorporated ITO cathode in the present transparent OLED fabricated was comparable to that of the previous double-layered structure comprising of ITO cathode and an organic buffer layer (BCP) doped by evaporation of cesium [T. Uchida, S. Kaneta, M. Ichihara, M. Ohtsuka, T. Otomo, D.R. Marx, Jpn. J. Appl. Phys., 44, No. 9 (2005) L282

  14. Equivalence principles and electromagnetism

    Science.gov (United States)

    Ni, W.-T.

    1977-01-01

    The implications of the weak equivalence principles are investigated in detail for electromagnetic systems in a general framework. In particular, it is shown that the universality of free-fall trajectories (Galileo weak equivalence principle) does not imply the validity of the Einstein equivalence principle. However, the Galileo principle plus the universality of free-fall rotation states does imply the Einstein principle.

  15. Bioreactor principles

    Science.gov (United States)

    2001-01-01

    Cells cultured on Earth (left) typically settle quickly on the bottom of culture vessels due to gravity. In microgravity (right), cells remain suspended and aggregate to form three-dimensional tissue. The NASA Bioreactor provides a low turbulence culture environment which promotes the formation of large, three-dimensional cell clusters. The Bioreactor is rotated to provide gentle mixing of fresh and spent nutrient without inducing shear forces that would damage the cells. Due to their high level of cellular organization and specialization, samples constructed in the bioreactor more closely resemble the original tumor or tissue found in the body. The work is sponsored by NASA's Office of Biological and Physical Research. The bioreactor is managed by the Biotechnology Cell Science Program at NASA's Johnson Space Center (JSC). NASA-sponsored bioreactor research has been instrumental in helping scientists to better understand normal and cancerous tissue development. In cooperation with the medical community, the bioreactor design is being used to prepare better models of human colon, prostate, breast and ovarian tumors. Cartilage, bone marrow, heart muscle, skeletal muscle, pancreatic islet cells, liver and kidney are just a few of the normal tissues being cultured in rotating bioreactors by investigators.

  16. Fibre Optic Communication Key Devices

    CERN Document Server

    Grote, Norbert

    2012-01-01

    The book gives an in-depth description of the key devices of current and next generation fibre optic communication networks. In particular, the book covers devices such as semiconductor lasers, optical amplifiers, modulators, wavelength filters, and detectors but the relevant properties of optical fibres as well. The presentations include the physical principles underlying the various devices, the technologies used for the realization of the different devices, typical performance characteristics and limitations, and development trends towards more advanced components are also illustrated. Thus the scope of the book spans relevant principles, state-of-the-art implementations, the status of current research and expected future components.

  17. The Laughter as Hope Principle

    Directory of Open Access Journals (Sweden)

    Mateus Domingues da Silva

    2015-04-01

    Full Text Available The work aims to establish a parallel between the concept of laughter and the Hope Principle of Ernst Bloch, differentiating their relationship between the pursuit of individual happiness, said to be ideological, deceptive and precarious, and the pursuit of collective happiness, altruistic, that despite utopian it is also true and real, just for being selfless and real because, as a collective expression, indicating concretely and politically, is a real possibility.Keywords: Laughter, Hope Principle, Ernest Bloch, altruism.

  18. Nanowire field effect transistors principles and applications

    CERN Document Server

    Jeong, Yoon-Ha

    2014-01-01

    “Nanowire Field Effect Transistor: Basic Principles and Applications” places an emphasis on the application aspects of nanowire field effect transistors (NWFET). Device physics and electronics are discussed in a compact manner, together with the p-n junction diode and MOSFET, the former as an essential element in NWFET and the latter as a general background of the FET. During this discussion, the photo-diode, solar cell, LED, LD, DRAM, flash EEPROM and sensors are highlighted to pave the way for similar applications of NWFET. Modeling is discussed in close analogy and comparison with MOSFETs. Contributors focus on processing, electrostatic discharge (ESD) and application of NWFET. This includes coverage of solar and memory cells, biological and chemical sensors, displays and atomic scale light emitting diodes. Appropriate for scientists and engineers interested in acquiring a working knowledge of NWFET as well as graduate students specializing in this subject.

  19. Finite element modeling of micromachined MEMS photon devices

    Science.gov (United States)

    Evans, Boyd M., III; Schonberger, D. W.; Datskos, Panos G.

    1999-09-01

    The technology of microelectronics that has evolved over the past half century is one of great power and sophistication and can now be extended to many applications (MEMS and MOEMS) other than electronics. An interesting application of MEMS quantum devices is the detection of electromagnetic radiation. The operation principle of MEMS quantum devices is based on the photoinduced stress in semiconductors, and the photon detection results from the measurement of the photoinduced bending. These devices can be described as micromechanical photon detectors. In this work, we have developed a technique for simulating electronic stresses using finite element analysis. We have used our technique to model the response of micromechanical photon devices to external stimuli and compared these results with experimental data. Material properties, geometry, and bimaterial design play an important role in the performance of micromechanical photon detectors. We have modeled these effects using finite element analysis and included the effects of bimaterial thickness coating, effective length of the device, width, and thickness.

  20. Finite Element Modeling of Micromachined MEMS Photon Devices

    International Nuclear Information System (INIS)

    Datskos, P.G.; Evans, B.M.; Schonberger, D.

    1999-01-01

    The technology of microelectronics that has evolved over the past half century is one of great power and sophistication and can now be extended to many applications (MEMS and MOEMS) other than electronics. An interesting application of MEMS quantum devices is the detection of electromagnetic radiation. The operation principle of MEMS quantum devices is based on the photoinduced stress in semiconductors, and the photon detection results from the measurement of the photoinduced bending. These devices can be described as micromechanical photon detectors. In this work, we have developed a technique for simulating electronic stresses using finite element analysis. We have used our technique to model the response of micromechanical photon devices to external stimuli and compared these results with experimental data. Material properties, geometry, and bimaterial design play an important role in the performance of micromechanical photon detectors. We have modeled these effects using finite element analysis and included the effects of bimaterial thickness coating, effective length of the device, width, and thickness

  1. Unconventional device concepts for polymer solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Veenstra, S.C.; Slooff, L.H.; Verhees, W.J.H.; Cobussen-Pool, E.M.; Lenzmann, F.O.; Kroon, J.M. [ECN Solar Energy, Petten (Netherlands); Sessolo, M.; Bolink, H.J. [Instituto de Ciencia Molecular, Universidad de Valencia, Valencia (Spain)

    2009-09-15

    The inclusion of metal-oxide layers in polymer solar cells enables the fabrication of a series of unconventional device architectures. These devices include: semi-transparent polymer solar cells, devices with inverted polarity, as well as devices with air stable electrodes. A proof-of-principle of these devices is presented. The anticipated benefits of these novel device structures over conventional polymer solar cells are discussed.

  2. The ''ATOS'' experimental device

    International Nuclear Information System (INIS)

    Belyaev, V.A.; Dorovskij, A.P.; Dubrovin, M.M.; Khlopkin, A.N.

    1980-08-01

    This paper contains a brief description of the ATOS experimental device at the I.V. Kurchatov Institute, Moscow, USSR, which has been designed in accordance with the merged beam principle to investigate collisions between heavy atomic particles and multiply-charged ions of impurity elements - following the programme of the Joint IFRC/INDC Subcommittee on Atomic and Molecular Data for Fusion

  3. Heterostructures and quantum devices

    CERN Document Server

    Einspruch, Norman G

    1994-01-01

    Heterostructure and quantum-mechanical devices promise significant improvement in the performance of electronic and optoelectronic integrated circuits (ICs). Though these devices are the subject of a vigorous research effort, the current literature is often either highly technical or narrowly focused. This book presents heterostructure and quantum devices to the nonspecialist, especially electrical engineers working with high-performance semiconductor devices. It focuses on a broad base of technical applications using semiconductor physics theory to develop the next generation of electrical en

  4. Influence of the ambient temperature on the cooling efficiency of the high performance cooling device with thermosiphon effect

    Science.gov (United States)

    Nemec, Patrik; Malcho, Milan

    2018-06-01

    This work deal with experimental measurement and calculation cooling efficiency of the cooling device working with a heat pipe technology. The referred device in the article is cooling device capable transfer high heat fluxes from electric elements to the surrounding. The work contain description, working principle and construction of cooling device. The main factor affected the dissipation of high heat flux from electronic elements through the cooling device to the surrounding is condenser construction, its capacity and option of heat removal. Experimental part describe the measuring method cooling efficiency of the cooling device depending on ambient temperature in range -20 to 40°C and at heat load of electronic components 750 W. Measured results are compared with results calculation based on physical phenomena of boiling, condensation and natural convection heat transfer.

  5. Right ventricular longitudinal strain and right ventricular stroke work index in patients with severe heart failure: left ventricular assist device suitability for transplant candidates.

    Science.gov (United States)

    Cameli, M; Bernazzali, S; Lisi, M; Tsioulpas, C; Croccia, M G; Lisi, G; Maccherini, M; Mondillo, S

    2012-09-01

    Right ventricular (RV) systolic function has a critical role in determining the clinical outcome and the success of using left ventricular assist devices in patients with refractory heart failure. RV deformation analysis by speckle tracking echocardiography (STE) has recently allowed the analysis of RV longitudinal function. Using cardiac catheterization as the reference standard, this study aimed to explore the correlation between RV longitudinal function by STE and RV stroke work index (RVSWI) among patients referred for cardiac transplantation. Right heart catheterization and transthoracic echo-Doppler were simultaneously performed in 47 patients referred for cardiac transplant assessment due to refractory heart failure (ejection fraction 25.1 ± 4.5%). Thermodilution RV stroke volume and invasive pulmonary pressures were used to obtain RVSWI. RV longitudinal strain (RVLS) by STE was assessed averaging RV free-wall segments (free-wall RVLS). We also calculated. Tricuspid S' and tricuspid annular plane systolic excursion (TAPSE). No significant correlation was observed for TAPSE on tricuspid S' with RV stroke volume (r = 0.14 and r = 0.06, respectively). A close negative correlation between free-wall RVLS and RVSWI was found (r = -0.82; P rights reserved.

  6. The several faces of the cosmological principle

    Energy Technology Data Exchange (ETDEWEB)

    Beisbart, Claus [TU Dortmund (Germany). Fakultaet 14, Institut fuer Philosophie und Politikwissenschaft

    2010-07-01

    Much work in relativistic cosmology relies upon the cosmological principle. Very roughly, this principle has it hat the universe is spatially homogeneous and isotropic. However, if the principle is to do some work, it has to be rendered more precise. The aim of this talk is to show that such a precification significantly depends on the theoretical framework adopted and on its ontology. Moreover, it is shown that present-day cosmology uses the principle in different versions that do not fit together nicely. Whereas, in theoretical cosmology, the principle is spelt out as a requirement on space-time manifolds, observational cosmology cashes out the principle using the notion of a random process. I point out some philosophical problems that arise in this context. My conclusion is that the cosmological principle is not a very precise hypothesis, but rather a rough idea that has several faces in contemporary cosmology.

  7. MEMS temperature scanner: principles, advances, and applications

    Science.gov (United States)

    Otto, Thomas; Saupe, Ray; Stock, Volker; Gessner, Thomas

    2010-02-01

    Contactless measurement of temperatures has gained enormous significance in many application fields, ranging from climate protection over quality control to object recognition in public places or military objects. Thereby measurement of linear or spatially temperature distribution is often necessary. For this purposes mostly thermographic cameras or motor driven temperature scanners are used today. Both are relatively expensive and the motor drive devices are limited regarding to the scanning rate additionally. An economic alternative are temperature scanner devices based on micro mirrors. The micro mirror, attached in a simple optical setup, reflects the emitted radiation from the observed heat onto an adapted detector. A line scan of the target object is obtained by periodic deflection of the micro scanner. Planar temperature distribution will be achieved by perpendicularly moving the target object or the scanner device. Using Planck radiation law the temperature of the object is calculated. The device can be adapted to different temperature ranges and resolution by using different detectors - cooled or uncooled - and parameterized scanner parameters. With the basic configuration 40 spatially distributed measuring points can be determined with temperatures in a range from 350°C - 1000°C. The achieved miniaturization of such scanners permits the employment in complex plants with high building density or in direct proximity to the measuring point. The price advantage enables a lot of applications, especially new application in the low-price market segment This paper shows principle, setup and application of a temperature measurement system based on micro scanners working in the near infrared range. Packaging issues and measurement results will be discussed as well.

  8. Performative Work

    DEFF Research Database (Denmark)

    Beunza, Daniel; Ferraro, Fabrizio

    2018-01-01

    by attending to the normative and regulative associations of the device. We theorize this route to performativity by proposing the concept of performative work, which designates the necessary institutional work to enable translation and the subsequent adoption of the device. We conclude by considering...... the implications of performative work for the performativity and the institutional work literatures.......Callon’s performativity thesis has illuminated how economic theories and calculative devices shape markets, but has been challenged for its neglect of the organizational, institutional and political context. Our seven-year qualitative study of a large financial data company found that the company...

  9. Pattern recognition with magnonic holographic memory device

    International Nuclear Information System (INIS)

    Kozhevnikov, A.; Dudko, G.; Filimonov, Y.; Gertz, F.; Khitun, A.

    2015-01-01

    In this work, we present experimental data demonstrating the possibility of using magnonic holographic devices for pattern recognition. The prototype eight-terminal device consists of a magnetic matrix with micro-antennas placed on the periphery of the matrix to excite and detect spin waves. The principle of operation is based on the effect of spin wave interference, which is similar to the operation of optical holographic devices. Input information is encoded in the phases of the spin waves generated on the edges of the magnonic matrix, while the output corresponds to the amplitude of the inductive voltage produced by the interfering spin waves on the other side of the matrix. The level of the output voltage depends on the combination of the input phases as well as on the internal structure of the magnonic matrix. Experimental data collected for several magnonic matrixes show the unique output signatures in which maxima and minima correspond to specific input phase patterns. Potentially, magnonic holographic devices may provide a higher storage density compare to optical counterparts due to a shorter wavelength and compatibility with conventional electronic devices. The challenges and shortcoming of the magnonic holographic devices are also discussed

  10. Quantum heat engines and refrigerators: continuous devices.

    Science.gov (United States)

    Kosloff, Ronnie; Levy, Amikam

    2014-01-01

    Quantum thermodynamics supplies a consistent description of quantum heat engines and refrigerators up to a single few-level system coupled to the environment. Once the environment is split into three (a hot, cold, and work reservoir), a heat engine can operate. The device converts the positive gain into power, with the gain obtained from population inversion between the components of the device. Reversing the operation transforms the device into a quantum refrigerator. The quantum tricycle, a device connected by three external leads to three heat reservoirs, is used as a template for engines and refrigerators. The equation of motion for the heat currents and power can be derived from first principles. Only a global description of the coupling of the device to the reservoirs is consistent with the first and second laws of thermodynamics. Optimization of the devices leads to a balanced set of parameters in which the couplings to the three reservoirs are of the same order and the external driving field is in resonance. When analyzing refrigerators, one needs to devote special attention to a dynamical version of the third law of thermodynamics. Bounds on the rate of cooling when Tc→0 are obtained by optimizing the cooling current. All refrigerators as Tc→0 show universal behavior. The dynamical version of the third law imposes restrictions on the scaling as Tc→0 of the relaxation rate γc and heat capacity cV of the cold bath.

  11. THE PROCEDURE OF REALIZATION OF THE DIDACTIC PRINCIPLE OF VISUAL METHOD IN AN EDUCATIONAL LABORATORY

    Directory of Open Access Journals (Sweden)

    Anatolii H. Protasov

    2010-08-01

    Full Text Available This paper is devoted to the procedure of realization of the main didactic principle – use visual method which becomes an essential factor of student perception of educational sources. The procedure is realized with series of laboratory works which are based on the principle – “device-computer-software”. The transformers of a physical magnitude into electrical signal are used in laboratory works. The combination of these transformers and a computer form the device which can measure a physical magnitude. The software allows reconstructing a virtual field distribution of this magnitude in area and observing its history. MATLAB is used as software and it provides with computation of different physical processes. The proposed procedure provides with a direct visual method and an indirect one as well. This matter promotes forming future specialists’ professional competence.

  12. Realization of the Switching Mechanism in Resistance Random Access Memory™ Devices: Structural and Electronic Properties Affecting Electron Conductivity in a Hafnium Oxide-Electrode System Through First-Principles Calculations

    Science.gov (United States)

    Aspera, Susan Meñez; Kasai, Hideaki; Kishi, Hirofumi; Awaya, Nobuyoshi; Ohnishi, Shigeo; Tamai, Yukio

    2013-01-01

    The resistance random access memory (RRAM™) device, with its electrically induced nanoscale resistive switching capacity, has attracted considerable attention as a future nonvolatile memory device. Here, we propose a mechanism of switching based on an oxygen vacancy migration-driven change in the electronic properties of the transition-metal oxide film stimulated by set pulse voltages. We used density functional theory-based calculations to account for the effect of oxygen vacancies and their migration on the electronic properties of HfO2 and Ta/HfO2 systems, thereby providing a complete explanation of the RRAM™ switching mechanism. Furthermore, computational results on the activation energy barrier for oxygen vacancy migration were found to be consistent with the set and reset pulse voltage obtained from experiments. Understanding this mechanism will be beneficial to effectively realizing the materials design in these devices.

  13. Principles of crystallization, and methods of single crystal growth

    International Nuclear Information System (INIS)

    Chacra, T.

    2010-01-01

    Most of single crystals (monocrystals), have distinguished optical, electrical, or magnetic properties, which make from single crystals, key elements in most of technical modern devices, as they may be used as lenses, Prisms, or grating sin optical devises, or Filters in X-Ray and spectrographic devices, or conductors and semiconductors in electronic, and computer industries. Furthermore, Single crystals are used in transducer devices. Moreover, they are indispensable elements in Laser and Maser emission technology.Crystal Growth Technology (CGT), has started, and developed in the international Universities and scientific institutions, aiming at some of single crystals, which may have significant properties and industrial applications, that can attract the attention of international crystal growth centers, to adopt the industrial production and marketing of such crystals. Unfortunately, Arab universities generally, and Syrian universities specifically, do not give even the minimum interest, to this field of Science.The purpose of this work is to attract the attention of Crystallographers, Physicists and Chemists in the Arab universities and research centers to the importance of crystal growth, and to work on, in the first stage to establish simple, uncomplicated laboratories for the growth of single crystal. Such laboratories can be supplied with equipment, which are partly available or can be manufactured in the local market. Many references (Articles, Papers, Diagrams, etc..) has been studied, to conclude the most important theoretical principles of Phase transitions,especially of crystallization. The conclusions of this study, are summarized in three Principles; Thermodynamic-, Morphologic-, and Kinetic-Principles. The study is completed by a brief description of the main single crystal growth methods with sketches, of equipment used in each method, which can be considered as primary designs for the equipment, of a new crystal growth laboratory. (author)

  14. Principles and applications of nanomems physics

    CERN Document Server

    Santos, Hector

    2005-01-01

    ""Principles and Applications of NanoMEMS Physics"" presents the first unified exposition of the physical principles at the heart of NanoMEMS-based devices and applications. In particular, after beginning with a comprehensive presentation of the fundamentals and limitations of nanotechnology and MEMS fabrication techniques, the book addresses the physics germane to this dimensional regime, namely, quantum wave-particle phenomena, including, the manifestation of charge discreteness, quantized electrostatic actuation, and the Casimir effect, and quantum wave phenomena, including, quantized elect

  15. Interplay between Interfacial Structures and Device Performance in Organic Solar Cells: A Case Study with the Low Work Function Metal, Calcium.

    Science.gov (United States)

    Ju, Huanxin; Knesting, Kristina M; Zhang, Wei; Pan, Xiao; Wang, Chia-Hsin; Yang, Yaw-Wen; Ginger, David S; Zhu, Junfa

    2016-01-27

    A better understanding of how interfacial structure affects charge carrier recombination would benefit the development of highly efficient organic photovoltaic (OPV) devices. In this paper, transient photovoltage (TPV) and charge extraction (CE) measurements are used in combination with synchrotron radiation photoemission spectroscopy (SRPES) to gain insight into the correlation between interfacial properties and device performance. OPV devices based on PCDTBT/PC71BM with a Ca interlayer were studied as a reference system to investigate the interfacial effects on device performance. Devices with a Ca interlayer exhibit a lower recombination than devices with only an Al cathode at a given charge carrier density (n). In addition, the interfacial band structures indicate that the strong dipole moment produced by the Ca interlayer can facilitate the extraction of electrons and drive holes away from the cathode/polymer interface, resulting in beneficial reduction in interfacial recombination losses. These results help explain the higher efficiencies of devices made with Ca interlayers compared to that without the Ca interlayer.

  16. Process monitoring by display devices

    International Nuclear Information System (INIS)

    Eggerdinger, C.; Schattner, R.

    1984-01-01

    The use of extensive automation, regulating, protection and limiting devices and the application of ergonomic principles (e.g. the increased use of mimic diagrams) has led to plant being capable of continued operation. German nuclear power stations are in top position worldwide as regards safety and availability. However, there is already a requirement to overcome the unmanageable state due to the large number and miniaturization of elements by renewed efforts. An attempt at this made with conventional technology is represented by a mimic board, which was provided in a powerstation just being set to work. Such mimic boards give the opportunity of monitoring the most important parameters at a glance but there are limits to their use due to the large space required. The use of VDU screens represents a possibility of solving this problem. (orig./DG) [de

  17. Semiconductor photocatalysis principles and applications

    CERN Document Server

    Kisch, Horst

    2014-01-01

    Focusing on the basic principles of semiconductor photocatalysis, this book also gives a brief introduction to photochemistry, photoelectrochemistry, and homogeneous photocatalysis. In addition, the author - one of the leading authorities in the field - presents important environmental and practical aspects. A valuable, one-stop source for all chemists, material scientists, and physicists working in this area, as well as novice researchers entering semiconductor photocatalysis.

  18. Research of training device on goniometry detector of nuclear burst

    International Nuclear Information System (INIS)

    He Shuijun; Wu Jiangfeng; Qin Jin

    2012-01-01

    The problem is that a Goniometry Detector is unable to be used to train, which lacks of simulation training environment and real training conditions. Its basic working principle is analyzed, and the overall program which is suitable to the training simulator is raised. We also describe the design of light source. We developed a set of experimental device and did some experiments on the basis of it. The experimental results show that technical approach of the program is feasible and the basic performance can meet training needs. The set of experimental device can solve practical training problems and play an important military benefit by improvements. (authors)

  19. Radiation protection principles

    International Nuclear Information System (INIS)

    Ismail Bahari

    2007-01-01

    The presentation outlines the aspects of radiation protection principles. It discussed the following subjects; radiation hazards and risk, the objectives of radiation protection, three principles of the system - justification of practice, optimization of protection and safety, dose limit

  20. Principles of project management

    Science.gov (United States)

    1982-01-01

    The basic principles of project management as practiced by NASA management personnel are presented. These principles are given as ground rules and guidelines to be used in the performance of research, development, construction or operational assignments.

  1. Metrological characterization of 3D imaging devices

    Science.gov (United States)

    Guidi, G.

    2013-04-01

    Manufacturers often express the performance of a 3D imaging device in various non-uniform ways for the lack of internationally recognized standard requirements for metrological parameters able to identify the capability of capturing a real scene. For this reason several national and international organizations in the last ten years have been developing protocols for verifying such performance. Ranging from VDI/VDE 2634, published by the Association of German Engineers and oriented to the world of mechanical 3D measurements (triangulation-based devices), to the ASTM technical committee E57, working also on laser systems based on direct range detection (TOF, Phase Shift, FM-CW, flash LADAR), this paper shows the state of the art about the characterization of active range devices, with special emphasis on measurement uncertainty, accuracy and resolution. Most of these protocols are based on special objects whose shape and size are certified with a known level of accuracy. By capturing the 3D shape of such objects with a range device, a comparison between the measured points and the theoretical shape they should represent is possible. The actual deviations can be directly analyzed or some derived parameters can be obtained (e.g. angles between planes, distances between barycenters of spheres rigidly connected, frequency domain parameters, etc.). This paper shows theoretical aspects and experimental results of some novel characterization methods applied to different categories of active 3D imaging devices based on both principles of triangulation and direct range detection.

  2. The certainty principle (review)

    OpenAIRE

    Arbatsky, D. A.

    2006-01-01

    The certainty principle (2005) allowed to conceptualize from the more fundamental grounds both the Heisenberg uncertainty principle (1927) and the Mandelshtam-Tamm relation (1945). In this review I give detailed explanation and discussion of the certainty principle, oriented to all physicists, both theorists and experimenters.

  3. Quantum Action Principle with Generalized Uncertainty Principle

    OpenAIRE

    Gu, Jie

    2013-01-01

    One of the common features in all promising candidates of quantum gravity is the existence of a minimal length scale, which naturally emerges with a generalized uncertainty principle, or equivalently a modified commutation relation. Schwinger's quantum action principle was modified to incorporate this modification, and was applied to the calculation of the kernel of a free particle, partly recovering the result previously studied using path integral.

  4. Principles of neural information processing

    CERN Document Server

    Seelen, Werner v

    2016-01-01

    In this fundamental book the authors devise a framework that describes the working of the brain as a whole. It presents a comprehensive introduction to the principles of Neural Information Processing as well as recent and authoritative research. The books´ guiding principles are the main purpose of neural activity, namely, to organize behavior to ensure survival, as well as the understanding of the evolutionary genesis of the brain. Among the developed principles and strategies belong self-organization of neural systems, flexibility, the active interpretation of the world by means of construction and prediction as well as their embedding into the world, all of which form the framework of the presented description. Since, in brains, their partial self-organization, the lifelong adaptation and their use of various methods of processing incoming information are all interconnected, the authors have chosen not only neurobiology and evolution theory as a basis for the elaboration of such a framework, but also syst...

  5. Advanced mechatronics and MEMS devices II

    CERN Document Server

    Wei, Bin

    2017-01-01

    This book introduces the state-of-the-art technologies in mechatronics, robotics, and MEMS devices in order to improve their methodologies. It provides a follow-up to "Advanced Mechatronics and MEMS Devices" (2013) with an exploration of the most up-to-date technologies and their applications, shown through examples that give readers insights and lessons learned from actual projects. Researchers on mechatronics, robotics, and MEMS as well as graduate students in mechanical engineering will find chapters on: Fundamental design and working principles on MEMS accelerometers Innovative mobile technologies Force/tactile sensors development Control schemes for reconfigurable robotic systems Inertial microfluidics Piezoelectric force sensors and dynamic calibration techniques ...And more. Authors explore applications in the areas of agriculture, biomedicine, advanced manufacturing, and space. Micro-assembly for current and future industries is also considered, as well as the design and development of micro and intel...

  6. Device-Centric Monitoring for Mobile Device Management

    OpenAIRE

    Chircop, Luke; Colombo, Christian; Pace, Gordon J.

    2016-01-01

    The ubiquity of computing devices has led to an increased need to ensure not only that the applications deployed on them are correct with respect to their specifications, but also that the devices are used in an appropriate manner, especially in situations where the device is provided by a party other than the actual user. Much work which has been done on runtime verification for mobile devices and operating systems is mostly application-centric, resulting in global, device-centri...

  7. Dimensional cosmological principles

    International Nuclear Information System (INIS)

    Chi, L.K.

    1985-01-01

    The dimensional cosmological principles proposed by Wesson require that the density, pressure, and mass of cosmological models be functions of the dimensionless variables which are themselves combinations of the gravitational constant, the speed of light, and the spacetime coordinates. The space coordinate is not the comoving coordinate. In this paper, the dimensional cosmological principle and the dimensional perfect cosmological principle are reformulated by using the comoving coordinate. The dimensional perfect cosmological principle is further modified to allow the possibility that mass creation may occur. Self-similar spacetimes are found to be models obeying the new dimensional cosmological principle

  8. 5 CFR 551.401 - Basic principles.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Basic principles. 551.401 Section 551.401 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PAY ADMINISTRATION UNDER THE FAIR LABOR STANDARDS ACT Hours of Work General Provisions § 551.401 Basic principles. (a) All time...

  9. Devices for overcoming biological barriers: the use of physical forces to disrupt the barriers.

    Science.gov (United States)

    Mitragotri, Samir

    2013-01-01

    Overcoming biological barriers including skin, mucosal membranes, blood brain barrier as well as cell and nuclear membrane constitutes a key hurdle in the field of drug delivery. While these barriers serve the natural protective function in the body, they limit delivery of drugs into the body. A variety of methods have been developed to overcome these barriers including formulations, targeting peptides and device-based technologies. This review focuses on the use of physical methods including acoustic devices, electric devices, high-pressure devices, microneedles and optical devices for disrupting various barriers in the body including skin and other membranes. A summary of the working principles of these devices and their ability to enhance drug delivery is presented. Copyright © 2012. Published by Elsevier B.V.

  10. Scalable devices

    KAUST Repository

    Krüger, Jens J.

    2014-01-01

    In computer science in general and in particular the field of high performance computing and supercomputing the term scalable plays an important role. It indicates that a piece of hardware, a concept, an algorithm, or an entire system scales with the size of the problem, i.e., it can not only be used in a very specific setting but it\\'s applicable for a wide range of problems. From small scenarios to possibly very large settings. In this spirit, there exist a number of fixed areas of research on scalability. There are works on scalable algorithms, scalable architectures but what are scalable devices? In the context of this chapter, we are interested in a whole range of display devices, ranging from small scale hardware such as tablet computers, pads, smart-phones etc. up to large tiled display walls. What interests us mostly is not so much the hardware setup but mostly the visualization algorithms behind these display systems that scale from your average smart phone up to the largest gigapixel display walls.

  11. Partial Device Fingerprints

    NARCIS (Netherlands)

    Ciere, M.; Hernandez Ganan, C.; van Eeten, M.J.G.

    2017-01-01

    In computing, remote devices may be identified by means of device fingerprinting, which works by collecting a myriad of clientside attributes such as the device’s browser and operating system version, installed plugins, screen resolution, hardware artifacts, Wi-Fi settings, and anything else

  12. Design Principles for Augmented Reality Learning

    Science.gov (United States)

    Dunleavy, Matt

    2014-01-01

    Augmented reality is an emerging technology that utilizes mobile, context-aware devices (e.g., smartphones, tablets) that enable participants to interact with digital information embedded within the physical environment. This overview of design principles focuses on specific strategies that instructional designers can use to develop AR learning…

  13. Description and principles of use of an automatic control device usable, in particular, in analytical chemistry; Description et principes d'utilisation d'un dispositif de commande automatique utilisable, en particulier, en chimie analytique

    Energy Technology Data Exchange (ETDEWEB)

    Rigaudiere, Roger; Jeanmaire, Lucien [Commissariat a l' Energie Atomique - CEA, Centre d' Etudes Nucleaires de Fontenay-aux-Roses, Direction de la Protection et de la Surete Radiologiques, Departement de la Protection Sanitaire, Section de Controle Sanitaire (France)

    1969-07-01

    This note describes an automatic control device for the programming of about 20 different functions, chronologically and during a given time. Any voltage can be chosen at the output to perform the different functions. Three examples of utilisation taken in analytical chemistry are given to illustrate the possibilities offered by this device, but its domain of use is much more universal and independent of the type of functions [French] Description d'un dispositif de commande automatique destine a programmer une vingtaine de fonctions differentes dans l'ordre et pendant le temps desire. Aux bornes d'utilisation de ce dispositif, on peut choisir a volonte du 24 V continu, du 220 V alternatif ou un contact de court-circuit pour realiser les fonctions elles-memes. Afin d'illustrer concretement les possibilites de cet appareil, il est donne trois exemples d'utilisation empruntes a la chimie analytique pour laquelle il a ete prevu initialement. En realite, son domaine d'utilisation est beaucoup plus universel, car il est relativement independant de la nature des fonctions. (auteurs)

  14. A novel in situ device based on a bionic piezoelectric actuator to study tensile and fatigue properties of bulk materials.

    Science.gov (United States)

    Wang, Shupeng; Zhang, Zhihui; Ren, Luquan; Zhao, Hongwei; Liang, Yunhong; Zhu, Bing

    2014-06-01

    In this work, a miniaturized device based on a bionic piezoelectric actuator was developed to investigate the static tensile and dynamic fatigue properties of bulk materials. The device mainly consists of a bionic stepping piezoelectric actuator based on wedge block clamping, a pair of grippers, and a set of precise signal test system. Tensile and fatigue examinations share a set of driving system and a set of signal test system. In situ tensile and fatigue examinations under scanning electron microscope or metallographic microscope could be carried out due to the miniaturized dimensions of the device. The structure and working principle of the device were discussed and the effects of output difference between two piezoelectric stacks on the device were theoretically analyzed. The tensile and fatigue examinations on ordinary copper were carried out using this device and its feasibility was verified through the comparison tests with a commercial tensile examination instrument.

  15. Making Benefit Transfers Work: Deriving and Testing Principles for Value Transfers for Similar and Dissimilar Sites Using a Case Study of the Non-Market Benefits of Water Quality Improvements Across Europe

    DEFF Research Database (Denmark)

    Bateman, Ian; Brouwer, Roy; Ferreri, Silvia

    2011-01-01

    We implement a controlled, multi-site experiment to develop and test guidance principles for benefits transfers. These argue that when transferring across relatively similar sites, simple mean value transfers are to be preferred but that when sites are relatively dissimilar then value function...... transfers will yield lower errors. The paper also provides guidance on the appropriate specification of transferable value functions arguing that these should be developed from theoretical rather than ad-hoc statistical approaches. These principles are tested via a common format valuation study of water...... quality improvements across five countries. While this provides an idealised tested, results support the above principles and suggest directions for future transfer studies....

  16. Quantum correlations are tightly bound by the exclusivity principle.

    Science.gov (United States)

    Yan, Bin

    2013-06-28

    It is a fundamental problem in physics of what principle limits the correlations as predicted by our current description of nature, based on quantum mechanics. One possible explanation is the "global exclusivity" principle recently discussed in Phys. Rev. Lett. 110, 060402 (2013). In this work we show that this principle actually has a much stronger restriction on the probability distribution. We provide a tight constraint inequality imposed by this principle and prove that this principle singles out quantum correlations in scenarios represented by any graph. Our result implies that the exclusivity principle might be one of the fundamental principles of nature.

  17. MWH's water treatment: principles and design

    National Research Council Canada - National Science Library

    Crittenden, John C

    2012-01-01

    ... with additional worked problems and new treatment approaches. It covers both the principles and theory of water treatment as well as the practical considerations of plant design and distribution...

  18. Cognitive Principles in Metonymic Headlines

    Directory of Open Access Journals (Sweden)

    Elena S. Milkevich

    2017-06-01

    Full Text Available The article focuses on metonymy as a linguistic device. Traditionally metonymy is considered within the domain of stylistics. However, methods of cognitive linguistics help to penetrate into the essence of language phenomena and explain their nature as part f more general process of human cognition. Cognitive linguistics puts forward the hypothesis that the use of metonymy is governed by cognitive principles. They are based on our experience, perception and culture. The article presents a study of metonymy in political headlines and analyses the application of cognitive principles to metonymy. We analyse the cases of metonymy presented by proper nouns geographical names such as names of countries, capital, continents. We come to the conclusion that the concept «COUNTRY» is the metonymic vehicle in three types of models: most frequent types of metonymy are: «COUNTRY FOR ITS GOVERNMENT», «COUNTRY FOR EVENT» and «COUNTRY FOR ACTION». The concept «COUNTRY» can also be the target in metonymy types «CAPITAL FOR COUNTRY» and «CONTINENT FOR COUNTRIES». The leading cognitive principles in such types of metonymic relationships are: based on human experience «CONCRETE OVER ABSTRACT», «INERACTIONAL OVER NON-INTERACTIONAL»; based on perceptual selectivity «DOMINANT OVER LESS DOMINANT», «MORE OVER LESS»; based on cultural preference «CENTRAL OVER PERIPHERAL», «MORE IMPORTANT OVER LESS IMPORTANT».

  19. An extension of the maximum principle to dimensional systems and its application in nuclear engineering problems

    International Nuclear Information System (INIS)

    Gilai, D.

    1976-01-01

    The Maximum Principle deals with optimization problems of systems, which are governed by ordinary differential equations, and which include constraints on the state and control variables. The development of nuclear engineering confronted the designers of reactors, shielding and other nuclear devices with many requests of optimization and savings and it was straight forward to use the Maximum Principle for solving optimization problems in nuclear engineering, in fact, it was widely used both structural concept design and dynamic control of nuclear systems. The main disadvantage of the Maximum Principle is that it is suitable only for systems which may be described by ordinary differential equations, e.g. one dimensional systems. In the present work, starting from the variational approach, the original Maximum Principle is extended to multidimensional systems, and the principle which has been derived, is of a more general form and is applicable to any system which can be defined by linear partial differential equations of any order. To check out the applicability of the extended principle, two examples are solved: the first in nuclear shield design, where the goal is to construct a shield around a neutron emitting source, using given materials, so that the total dose outside of the shielding boundaries is minimized, the second in material distribution design in the core of a power reactor, so that the power peak is minimised. For the second problem, an iterative method was developed. (B.G.)

  20. Biomechanics principles and practices

    CERN Document Server

    Peterson, Donald R

    2014-01-01

    Presents Current Principles and ApplicationsBiomedical engineering is considered to be the most expansive of all the engineering sciences. Its function involves the direct combination of core engineering sciences as well as knowledge of nonengineering disciplines such as biology and medicine. Drawing on material from the biomechanics section of The Biomedical Engineering Handbook, Fourth Edition and utilizing the expert knowledge of respected published scientists in the application and research of biomechanics, Biomechanics: Principles and Practices discusses the latest principles and applicat

  1. Fusion research principles

    CERN Document Server

    Dolan, Thomas James

    2013-01-01

    Fusion Research, Volume I: Principles provides a general description of the methods and problems of fusion research. The book contains three main parts: Principles, Experiments, and Technology. The Principles part describes the conditions necessary for a fusion reaction, as well as the fundamentals of plasma confinement, heating, and diagnostics. The Experiments part details about forty plasma confinement schemes and experiments. The last part explores various engineering problems associated with reactor design, vacuum and magnet systems, materials, plasma purity, fueling, blankets, neutronics

  2. How Many Principles for Public Health Ethics?

    Science.gov (United States)

    Coughlin, Steven S.

    2009-01-01

    General moral (ethical) principles play a prominent role in certain methods of moral reasoning and ethical decision-making in bioethics and public health. Examples include the principles of respect for autonomy, beneficence, nonmaleficence, and justice. Some accounts of ethics in public health have pointed to additional principles related to social and environmental concerns, such as the precautionary principle and principles of solidarity or social cohesion. This article provides an overview of principle-based methods of moral reasoning as they apply to public health ethics including a summary of advantages and disadvantages of methods of moral reasoning that rely upon general principles of moral reasoning. Drawing upon the literature on public health ethics, examples are provided of additional principles, obligations, and rules that may be useful for analyzing complex ethical issues in public health. A framework is outlined that takes into consideration the interplay of ethical principles and rules at individual, community, national, and global levels. Concepts such as the precautionary principle and solidarity are shown to be useful to public health ethics to the extent that they can be shown to provide worthwhile guidance and information above and beyond principles of beneficence, nonmaleficence, and justice, and the clusters of rules and maxims that are linked to these moral principles. Future directions likely to be productive include further work on areas of public health ethics such as public trust, community empowerment, the rights of individuals who are targeted (or not targeted) by public health interventions, individual and community resilience and wellbeing, and further clarification of principles, obligations, and rules in public health disciplines such as environmental science, prevention and control of chronic and infectious diseases, genomics, and global health. PMID:20072707

  3. Database principles programming performance

    CERN Document Server

    O'Neil, Patrick

    2014-01-01

    Database: Principles Programming Performance provides an introduction to the fundamental principles of database systems. This book focuses on database programming and the relationships between principles, programming, and performance.Organized into 10 chapters, this book begins with an overview of database design principles and presents a comprehensive introduction to the concepts used by a DBA. This text then provides grounding in many abstract concepts of the relational model. Other chapters introduce SQL, describing its capabilities and covering the statements and functions of the programmi

  4. Principles of ecotoxicology

    National Research Council Canada - National Science Library

    Walker, C. H

    2012-01-01

    "Now in its fourth edition, this exceptionally accessible text provides students with a multidisciplinary perspective and a grounding in the fundamental principles required for research in toxicology today...

  5. Photovoltaic device

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Jason A; Keenihan, James R; Gaston, Ryan S; Kauffmann, Keith L; Langmaid, Joseph A; Lopez, Leonardo; Maak, Kevin D; Mills, Michael E; Ramesh, Narayan; Teli, Samar R

    2017-03-21

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

  6. Photovoltaic device

    Science.gov (United States)

    Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

    2015-06-02

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

  7. Photovoltaic device

    Science.gov (United States)

    Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

    2015-09-01

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device (10) with a multilayered photovoltaic cell assembly (100) and a body portion (200) joined at an interface region (410) and including an intermediate layer (500), at least one interconnecting structural member (1500), relieving feature (2500), unique component geometry, or any combination thereof.

  8. Design on opposed inclined-plate high-speed precision seed-metering device and its working mechanism analysis%对置斜盘高速精密大豆排种器设计与充种机理分析

    Institute of Scientific and Technical Information of China (English)

    刘宏新; 刘俊孝; 唐师法; 徐晓萌

    2016-01-01

    Mechanical precision seed-metering device has low price, compact structure, good manufacturability and other advantages. However, in recent years, the pneumatic precision seed-metering device has occupied the dominant position, mainly because of the fatal flaw of the hole filling rate declining rapidly in high speed for mechanical precision seed-metering device, which resulted in grievous decline in the quality of operation and serious seed-leakage phenomenon. Due to the structure characteristic of seed-metering device and mixing characteristic of granular soybean seeds, the value of filling force in the form of compressive stress was limited. For this reason, how to improve the filling force was a crucial factor for mechanical precision seed-metering device. In this paper, the model of filling force of hole was built. And an opposed inclined seed-metering device was innovatively designed by theoretical analysis, which combined the advantages of a variety of mechanical seed-metering devices. It could improve seeding frequency by using double-plate to seed in single line. It changed the seed filling pattern from structure, made full use of the structure of the shell space, improved the compaction force and the filling force type, and further improved the qualified rate and its performance under high-speed operation to adapt to the modern high-speed operation requirements. Relying on gravity cleaning of seed, it effectively avoided the injury of seeds. The double-cavity composite vertical seed-metering device was chosen as a comparison, which also had high speed operation ability. The mathematical models were established according to the working principle. The filling force of the vertical disk seed-metering device and opposed inclined-plate seed-metering device was contrasted and analyzed. Through analyzing the filling force changing rule of the seed-metering device in different angles, and drawing the function image by Matlab (MATrix LABoratory) software, the

  9. Principles of health information systems in developing countries.

    Science.gov (United States)

    Krickeberg, Klaus

    The setting of this article is an all-embracing Health Information System (HIS)* of the type that exists mainly in developing and transition countries. It was inspired by work in Vietnam and other places. The article discusses the basic principles on which a well-functioning HIS needs to rest regardless of the technical means employed (paper, electronic devices). Eleven principles for designing or reforming a HIS are identified, including: explicit description of the underlying units (target population) and variables; no list of indicators to be fixed in advance; only one register per target population; technical coordination between registers and reports; correction algorithms; local use of data and indicators; autonomy of health institutions regarding the information that concerns them; and novel use of registers for various studies. Apart from their technical role, these principles give shape to the philosophy that underlies this article, and make clear that a HIS is not only a tool for collecting indicators; it is intimately tied to clinical and preventive practice, as well as to health management and health economy. In fact, it permeates the entire health system. It can potentially play a much more extended, varied, and useful role than simply that of providing health services to a community.

  10. Nanostructured energy devices equilibrium concepts and kinetics

    CERN Document Server

    Bisquert, Juan

    2014-01-01

    Due to the pressing needs of society, low cost materials for energy devices have experienced an outstanding development in recent times. In this highly multidisciplinary area, chemistry, material science, physics, and electrochemistry meet to develop new materials and devices that perform required energy conversion and storage processes with high efficiency, adequate capabilities for required applications, and low production cost. Nanostructured Energy Devices: Equilibrium Concepts and Kinetics introduces the main physicochemical principles that govern the operation of energy devices. It inclu

  11. APPLYING THE PRINCIPLES OF ACCOUNTING IN

    OpenAIRE

    NAGY CRISTINA MIHAELA; SABĂU CRĂCIUN; ”Tibiscus” University of Timişoara, Faculty of Economic Science

    2015-01-01

    The application of accounting principles (accounting principle on accrual basis; principle of business continuity; method consistency principle; prudence principle; independence principle; the principle of separate valuation of assets and liabilities; intangibility principle; non-compensation principle; the principle of substance over form; the principle of threshold significance) to companies that are in bankruptcy procedure has a number of particularities. Thus, some principl...

  12. Microprocessor protection devices: The present and the future

    Directory of Open Access Journals (Sweden)

    Gurevich Vladimir

    2008-01-01

    Full Text Available Paper presents the analysis of the basic constructive disadvantages of the present day microprocessor-based protective devices (MBR and offers the basic principles for creating a new MBR that can be used in newly constructed devices.

  13. ACCOUNTING PRINCIPLES: EVOLUTION, CONTENT, CONSEQUENCES

    Directory of Open Access Journals (Sweden)

    Liliana LAZARI

    2017-04-01

    Full Text Available Accounting principles are rules that help producers of financial information to recognize, evaluate, classify and present information. At the same time, they are very general rules, which can be implemented in several ways, generating more accounting treatments. Although the foreign literature presents numerous classifications of the principles in terms of the given research, we will continue to deal with the terms that have the value of accounting principles, their evolution in the Republic of Moldova, but also the influence on keeping the accounting and financial reporting. In the research, we used the method of comparison, analysis, deduction, but also the historical method. The results of the research on accounting principles will contribute to the development of their applicability both for those studying and researching the field of accounting, as well as for those who apply in practice the keeping of accounting in all stages of work: elaboration of accounting policies, recognition, evaluation and accounting for economic transactions and preparing the financial statements of the entity.

  14. The genetic difference principle.

    Science.gov (United States)

    Farrelly, Colin

    2004-01-01

    In the newly emerging debates about genetics and justice three distinct principles have begun to emerge concerning what the distributive aim of genetic interventions should be. These principles are: genetic equality, a genetic decent minimum, and the genetic difference principle. In this paper, I examine the rationale of each of these principles and argue that genetic equality and a genetic decent minimum are ill-equipped to tackle what I call the currency problem and the problem of weight. The genetic difference principle is the most promising of the three principles and I develop this principle so that it takes seriously the concerns of just health care and distributive justice in general. Given the strains on public funds for other important social programmes, the costs of pursuing genetic interventions and the nature of genetic interventions, I conclude that a more lax interpretation of the genetic difference principle is appropriate. This interpretation stipulates that genetic inequalities should be arranged so that they are to the greatest reasonable benefit of the least advantaged. Such a proposal is consistent with prioritarianism and provides some practical guidance for non-ideal societies--that is, societies that do not have the endless amount of resources needed to satisfy every requirement of justice.

  15. The principle of equivalence

    International Nuclear Information System (INIS)

    Unnikrishnan, C.S.

    1994-01-01

    Principle of equivalence was the fundamental guiding principle in the formulation of the general theory of relativity. What are its key elements? What are the empirical observations which establish it? What is its relevance to some new experiments? These questions are discussed in this article. (author). 11 refs., 5 figs

  16. The Dutch premium principle

    NARCIS (Netherlands)

    van Heerwaarden, A.E.; Kaas, R.

    1992-01-01

    A premium principle is derived, in which the loading for a risk is the reinsurance loading for an excess-of-loss cover. It is shown that the principle is well-behaved in the sense that it results in larger premiums for risks that are larger in stop-loss order or in stochastic dominance.

  17. The anthropic principle

    International Nuclear Information System (INIS)

    Carr, B.J.

    1982-01-01

    The anthropic principle (the conjecture that certain features of the world are determined by the existence of Man) is discussed with the listing of the objections, and is stated that nearly all the constants of nature may be determined by the anthropic principle which does not give exact values for the constants but only their orders of magnitude. (J.T.)

  18. The precautionary principle: is it safe.

    Science.gov (United States)

    Gignon, Maxime; Ganry, Olivier; Jardé, Olivier; Manaouil, Cécile

    2013-06-01

    The precautionary principle is generally acknowledged to be a powerful tool for protecting health but it was originally invoked by policy makers for dealing with environmental issues. In the 1990s, the principle was incorporated into many legislative and regulatory texts in international law. One can consider that the precautionary principle has turned into "precautionism" necessary to prove to the people, taking account of risk in decisions. There is now a risk that these abuses will deprive the principle of its meaning and value. When pushed to its limits, the precautionary principle can even be dangerous when applied to the healthcare field. This is why a critical analysis of the principle is necessary. Through the literature, it sometimes seems to deviate somehow from the essence of the precautionary principle as it is commonly used in relation to health. We believe that educational work is necessary to familiarize professionals, policy makers and public opinion of the precautionary principle and avoid confusion. We propose a critical analysis of the use and misuse of the precautionary principle.

  19. Mach's holographic principle

    International Nuclear Information System (INIS)

    Khoury, Justin; Parikh, Maulik

    2009-01-01

    Mach's principle is the proposition that inertial frames are determined by matter. We put forth and implement a precise correspondence between matter and geometry that realizes Mach's principle. Einstein's equations are not modified and no selection principle is applied to their solutions; Mach's principle is realized wholly within Einstein's general theory of relativity. The key insight is the observation that, in addition to bulk matter, one can also add boundary matter. Given a space-time, and thus the inertial frames, we can read off both boundary and bulk stress tensors, thereby relating matter and geometry. We consider some global conditions that are necessary for the space-time to be reconstructible, in principle, from bulk and boundary matter. Our framework is similar to that of the black hole membrane paradigm and, in asymptotically anti-de Sitter space-times, is consistent with holographic duality.

  20. Variational principles in physics

    CERN Document Server

    Basdevant, Jean-Louis

    2007-01-01

    Optimization under constraints is an essential part of everyday life. Indeed, we routinely solve problems by striking a balance between contradictory interests, individual desires and material contingencies. This notion of equilibrium was dear to thinkers of the enlightenment, as illustrated by Montesquieu’s famous formulation: "In all magistracies, the greatness of the power must be compensated by the brevity of the duration." Astonishingly, natural laws are guided by a similar principle. Variational principles have proven to be surprisingly fertile. For example, Fermat used variational methods to demonstrate that light follows the fastest route from one point to another, an idea which came to be known as Fermat’s principle, a cornerstone of geometrical optics. Variational Principles in Physics explains variational principles and charts their use throughout modern physics. The heart of the book is devoted to the analytical mechanics of Lagrange and Hamilton, the basic tools of any physicist. Prof. Basdev...

  1. Synthetic principles directing charge transport in low-band-gap dithienosilole-benzothiadiazole copolymers

    KAUST Repository

    Beaujuge, Pierre; Tsao, Hoinok; Hansen, Michael Ryan; Amb, Chad M.; Risko, Chad; Subbiah, Jegadesan; Choudhury, Kaushik Roy; Mavrinskiy, Alexey V.; Pisula, Wojciech; Bré das, Jean Luc; So, Franky; Mü llen, Klä us; Reynolds, John R.

    2012-01-01

    Given the fundamental differences in carrier generation and device operation in organic thin-film transistors (OTFTs) and organic photovoltaic (OPV) devices, the material design principles to apply may be expected to differ. In this respect

  2. Electron microscopy - principles of radiation protection

    International Nuclear Information System (INIS)

    1990-01-01

    This 8 minute programme explains the nature of the possible radiation hazard in Electron Microscopy and outlines the ways in which modern equipment is designed and made so that in normal use the worker is not exposed to radiation. The interlock principle is explained and illustrated by an example from the field of X-ray crystallography. By filming machines while they were dismantled for servicing, details of several internal safety devices have been included. In this way workers who normally use the equipment as a 'black box' get some insight into the principles and practice of radiation protection in the field. (author)

  3. Sealing device

    Science.gov (United States)

    Garcia-Crespo, Andres Jose

    2013-12-10

    A sealing device for sealing a gap between a dovetail of a bucket assembly and a rotor wheel is disclosed. The sealing device includes a cover plate configured to cover the gap and a retention member protruding from the cover plate and configured to engage the dovetail. The sealing device provides a seal against the gap when the bucket assemply is subjected to a centrifugal force.

  4. Microfluidic Device

    Science.gov (United States)

    Tai, Yu-Chong (Inventor); Zheng, Siyang (Inventor); Lin, Jeffrey Chun-Hui (Inventor); Kasdan, Harvey L. (Inventor)

    2017-01-01

    Described herein are particular embodiments relating to a microfluidic device that may be utilized for cell sensing, counting, and/or sorting. Particular aspects relate to a microfabricated device that is capable of differentiating single cell types from dense cell populations. One particular embodiment relates a device and methods of using the same for sensing, counting, and/or sorting leukocytes from whole, undiluted blood samples.

  5. Gauging device

    International Nuclear Information System (INIS)

    Qurnell, F.D.; Patterson, C.B.

    1979-01-01

    A gauge supporting device for measuring say a square tube comprises a pair of rods or guides in tension between a pair of end members, the end members being spaced apart by a compression member or members. The tensioned guides provide planes of reference for measuring devices moved therealong on a carriage. The device is especially useful for making on site dimensional measurements of components, such as irradiated and therefore radioactive components, that cannot readily be transported to an inspection laboratory. (UK)

  6. The validity of the extended energy principle

    International Nuclear Information System (INIS)

    Chance, M.S.; Johnson, J.L.; Kulsrud, R.M.

    1994-04-01

    A recent analysis of plasma stability based on modifications of the extended energy principle for magnetohydrodynamic stability led to conclusions that are too optimistic. The original interpretation of this principle is indeed applicable. The present analysis demonstrates explicitly the fallacy of using the wrong functional for δW in the extended energy principle. It then shows that the original energy principle functional δW B is also obtained for a model in which a surface mass is incorporated to provide pressure balance. This work therefore indicates, but does not prove, that the eigenfunctions that are obtained from a minimization of the extended energy principle with the proper kinetic energy norm provide a good representation of what would be achieved with an exact treatment

  7. The principle of electron microscopy; SEM and TEM

    International Nuclear Information System (INIS)

    Fauzi, S.H.

    1992-01-01

    The article reviews the principle of electron microscopy which is used in scanning electron microscope (SEM) and transmission electron microscope (TEM). These instruments are important for the examination and analysis of the microstructural properties of solid objects. Relevance physical concept lies behind the devices are given. The main components of each device are also discussed

  8. Design Principles for the Atomic and Electronic Structure of Halide Perovskite Photovoltaic Materials: Insights from Computation.

    Science.gov (United States)

    Berger, Robert F

    2018-02-09

    In the current decade, perovskite solar cell research has emerged as a remarkably active, promising, and rapidly developing field. Alongside breakthroughs in synthesis and device engineering, halide perovskite photovoltaic materials have been the subject of predictive and explanatory computational work. In this Minireview, we focus on a subset of this computation: density functional theory (DFT)-based work highlighting the ways in which the electronic structure and band gap of this class of materials can be tuned via changes in atomic structure. We distill this body of computational literature into a set of underlying design principles for the band gap engineering of these materials, and rationalize these principles from the viewpoint of band-edge orbital character. We hope that this perspective provides guidance and insight toward the rational design and continued improvement of perovskite photovoltaics. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Physics of electronic materials principles and applications

    CERN Document Server

    Rammer, Jorgen

    2017-01-01

    Adopting a uniquely pedagogical approach, this comprehensive textbook on the quantum mechanics of semiconductor materials and devices focuses on the materials, components and devices themselves whilst incorporating a substantial amount of fundamental physics related to condensed matter theory and quantum mechanics. Written primarily for advanced undergraduate students in physics and engineering, this book can also be used as a supporting text for introductory quantum mechanics courses, and will be of interest to anyone interested in how electronic devices function at a fundamental level. Complete with numerous exercises, and with all the necessary mathematics and physics included in appendices, this book guides the reader seamlessly through the principles of quantum mechanics and the quantum theory of metals and semiconductors, before describing in detail how devices are exploited within electric circuits and in the hardware of computers, for example as amplifiers, switches and transistors. Includes nume...

  10. Limitations of Boltzmann's principle

    International Nuclear Information System (INIS)

    Lavenda, B.H.

    1995-01-01

    The usual form of Boltzmann's principle assures that maximum entropy, or entropy reduction, occurs with maximum probability, implying a unimodal distribution. Boltzmann's principle cannot be applied to nonunimodal distributions, like the arcsine law, because the entropy may be concave only over a limited portion of the interval. The method of subordination shows that the arcsine distribution corresponds to a process with a single degree of freedom, thereby confirming the invalidation of Boltzmann's principle. The fractalization of time leads to a new distribution in which arcsine and Cauchy distributions can coexist simultaneously for nonintegral degrees of freedom between √2 and 2

  11. Biomedical engineering principles

    CERN Document Server

    Ritter, Arthur B; Valdevit, Antonio; Ascione, Alfred N

    2011-01-01

    Introduction: Modeling of Physiological ProcessesCell Physiology and TransportPrinciples and Biomedical Applications of HemodynamicsA Systems Approach to PhysiologyThe Cardiovascular SystemBiomedical Signal ProcessingSignal Acquisition and ProcessingTechniques for Physiological Signal ProcessingExamples of Physiological Signal ProcessingPrinciples of BiomechanicsPractical Applications of BiomechanicsBiomaterialsPrinciples of Biomedical Capstone DesignUnmet Clinical NeedsEntrepreneurship: Reasons why Most Good Designs Never Get to MarketAn Engineering Solution in Search of a Biomedical Problem

  12. Modern electronic maintenance principles

    CERN Document Server

    Garland, DJ

    2013-01-01

    Modern Electronic Maintenance Principles reviews the principles of maintaining modern, complex electronic equipment, with emphasis on preventive and corrective maintenance. Unfamiliar subjects such as the half-split method of fault location, functional diagrams, and fault finding guides are explained. This book consists of 12 chapters and begins by stressing the need for maintenance principles and discussing the problem of complexity as well as the requirements for a maintenance technician. The next chapter deals with the connection between reliability and maintenance and defines the terms fai

  13. [Bioethics of principles].

    Science.gov (United States)

    Pérez-Soba Díez del Corral, Juan José

    2008-01-01

    Bioethics emerges about the tecnological problems of acting in human life. Emerges also the problem of the moral limits determination, because they seem exterior of this practice. The Bioethics of Principles, take his rationality of the teleological thinking, and the autonomism. These divergence manifest the epistemological fragility and the great difficulty of hmoralñ thinking. This is evident in the determination of autonomy's principle, it has not the ethical content of Kant's propose. We need a new ethic rationality with a new refelxion of new Principles whose emerges of the basic ethic experiences.

  14. Hamilton's principle for beginners

    International Nuclear Information System (INIS)

    Brun, J L

    2007-01-01

    I find that students have difficulty with Hamilton's principle, at least the first time they come into contact with it, and therefore it is worth designing some examples to help students grasp its complex meaning. This paper supplies the simplest example to consolidate the learning of the quoted principle: that of a free particle moving along a line. Next, students are challenged to add gravity to reinforce the argument and, finally, a two-dimensional motion in a vertical plane is considered. Furthermore these examples force us to be very clear about such an abstract principle

  15. Developing principles of growth

    DEFF Research Database (Denmark)

    Neergaard, Helle; Fleck, Emma

    of the principles of growth among women-owned firms. Using an in-depth case study methodology, data was collected from women-owned firms in Denmark and Ireland, as these countries are similar in contextual terms, e.g. population and business composition, dominated by micro, small and medium-sized enterprises....... Extending on principles put forward in effectuation theory, we propose that women grow their firms according to five principles which enable women’s enterprises to survive in the face of crises such as the current financial world crisis....

  16. Metallic spintronic devices

    CERN Document Server

    Wang, Xiaobin

    2014-01-01

    Metallic Spintronic Devices provides a balanced view of the present state of the art of metallic spintronic devices, addressing both mainstream and emerging applications from magnetic tunneling junction sensors and spin torque oscillators to spin torque memory and logic. Featuring contributions from well-known and respected industrial and academic experts, this cutting-edge work not only presents the latest research and developments but also: Describes spintronic applications in current and future magnetic recording devicesDiscusses spin-transfer torque magnetoresistive random-access memory (STT-MRAM) device architectures and modelingExplores prospects of STT-MRAM scaling, such as detailed multilevel cell structure analysisInvestigates spintronic device write and read optimization in light of spintronic memristive effectsConsiders spintronic research directions based on yttrium iron garnet thin films, including spin pumping, magnetic proximity, spin hall, and spin Seebeck effectsProposes unique solutions for ...

  17. Microoxygraph Device for Biosensoristic Applications

    Directory of Open Access Journals (Sweden)

    A. Aloisi

    2016-01-01

    Full Text Available Oxygen consumption rate (OCR is a significant parameter helpful to determine in vitro respiratory efficiency of living cells. Oxygen is an excellent oxidant and its electrocatalytic reduction on a noble metal allows accurately detecting it. By means of microfabrication technologies, handy, low-cost, and disposable chip can be attained, minimizing working volumes and improving sensitivity and response time. In this respect, here is presented a microoxygraph device (MOD, based on Clark’s electrode principle, displaying many advantageous features in comparison to other systems. This lab-on-chip platform is composed of a three-microelectrode detector equipped with a microgrooved electrochemical cell, sealed with a polymeric reaction chamber. Au working/counter electrodes and Ag/AgCl reference electrode were fabricated on a glass slide. A microchannel was realized by photoresist lift-off technique and a polydimethylsiloxane (PDMS nanoporous film was integrated as oxygen permeable membrane (OPM between the probe and the microreaction chamber. Electrochemical measurements showed good reproducibility and average response time, assessed by periodic injection and suction of a reducing agent. OCR measurements on 3T3 cells, subjected, in real time, to chemical stress on the respiratory chain, were able to show that this chip allows performing consistent metabolic analysis.

  18. An introduction to electrooptic devices

    CERN Document Server

    Kaminow, Ivan P

    1974-01-01

    An Introduction to Electrooptic Devices aims to present an introduction to the electrooptic effect and to summarize work on devices employing the electrooptic effect. The book provides the necessary background in classical crystal optics. The text then discusses topics including crystal symmetry, the tensor description of linear dielectric properties, propagation in anisotropic media, and passive crystal optic devices. The book also describes the phenomenological description of tensor nonlinear dielectric properties of crystals, with emphasis on the electrooptic effect; device design and appli

  19. The principles of computer hardware

    CERN Document Server

    Clements, Alan

    2000-01-01

    Principles of Computer Hardware, now in its third edition, provides a first course in computer architecture or computer organization for undergraduates. The book covers the core topics of such a course, including Boolean algebra and logic design; number bases and binary arithmetic; the CPU; assembly language; memory systems; and input/output methods and devices. It then goes on to cover the related topics of computer peripherals such as printers; the hardware aspects of the operating system; and data communications, and hence provides a broader overview of the subject. Its readable, tutorial-based approach makes it an accessible introduction to the subject. The book has extensive in-depth coverage of two microprocessors, one of which (the 68000) is widely used in education. All chapters in the new edition have been updated. Major updates include: powerful software simulations of digital systems to accompany the chapters on digital design; a tutorial-based introduction to assembly language, including many exam...

  20. PRINCIPLES AND PROCEDURES ON FISCAL

    Directory of Open Access Journals (Sweden)

    Morar Ioan Dan

    2011-07-01

    Full Text Available Fiscal science advertise in most analytical situations, while the principles reiterated by specialists in the field in various specialized works The two components of taxation, the tax system relating to the theoretical and the practical procedures relating to tax are marked by frequent references and invocations of the underlying principles to tax. This paper attempts a return on equity fiscal general vision as a principle often invoked and used to justify tax policies, but so often violated the laws fiscality . Also want to emphasize the importance of devising procedures to ensure fiscal equitable treatment of taxpayers. Specific approach of this paper is based on the notion that tax equity is based on equality before tax and social policies of the executive that would be more effective than using the other tax instruments. I want to emphasize that if the scientific approach to justify the unequal treatment of the tax law is based on the various social problems of the taxpayers, then deviates from the issue of tax fairness justification explaining the need to promote social policies usually more attractive to taxpayers. Modern tax techniques are believed to be promoted especially in order to ensure an increasing level of high efficiency at the expense of the taxpayers obligations to ensure equality before the law tax. On the other hand, tax inequities reaction generates multiple recipients from the first budget plan, but finalities unfair measures can not quantify and no timeline for the reaction, usually not known. But while statistics show fluctuations in budgetary revenues and often find in literature reviews and analysis relevant to a connection between changes in government policies, budget execution and outcome. The effects of inequality on tax on tax procedures and budgetary revenues are difficult to quantify and is among others to this work. Providing tax equity without combining it with the principles of discrimination and neutrality

  1. Security analysis on some experimental quantum key distribution systems with imperfect optical and electrical devices

    Science.gov (United States)

    Liang, Lin-Mei; Sun, Shi-Hai; Jiang, Mu-Sheng; Li, Chun-Yan

    2014-10-01

    In general, quantum key distribution (QKD) has been proved unconditionally secure for perfect devices due to quantum uncertainty principle, quantum noncloning theorem and quantum nondividing principle which means that a quantum cannot be divided further. However, the practical optical and electrical devices used in the system are imperfect, which can be exploited by the eavesdropper to partially or totally spy the secret key between the legitimate parties. In this article, we first briefly review the recent work on quantum hacking on some experimental QKD systems with respect to imperfect devices carried out internationally, then we will present our recent hacking works in details, including passive faraday mirror attack, partially random phase attack, wavelength-selected photon-number-splitting attack, frequency shift attack, and single-photon-detector attack. Those quantum attack reminds people to improve the security existed in practical QKD systems due to imperfect devices by simply adding countermeasure or adopting a totally different protocol such as measurement-device independent protocol to avoid quantum hacking on the imperfection of measurement devices [Lo, et al., Phys. Rev. Lett., 2012, 108: 130503].

  2. Principles of animal extrapolation

    Energy Technology Data Exchange (ETDEWEB)

    Calabrese, E.J.

    1991-01-01

    Animal Extrapolation presents a comprehensive examination of the scientific issues involved in extrapolating results of animal experiments to human response. This text attempts to present a comprehensive synthesis and analysis of the host of biomedical and toxicological studies of interspecies extrapolation. Calabrese's work presents not only the conceptual basis of interspecies extrapolation, but also illustrates how these principles may be better used in selection of animal experimentation models and in the interpretation of animal experimental results. The book's theme centers around four types of extrapolation: (1) from average animal model to the average human; (2) from small animals to large ones; (3) from high-risk animal to the high risk human; and (4) from high doses of exposure to lower, more realistic, doses. Calabrese attacks the issues of interspecies extrapolation by dealing individually with the factors which contribute to interspecies variability: differences in absorption, intestinal flora, tissue distribution, metabolism, repair mechanisms, and excretion. From this foundation, Calabrese then discusses the heterogeneticity of these same factors in the human population in an attempt to evaluate the representativeness of various animal models in light of interindividual variations. In addition to discussing the question of suitable animal models for specific high-risk groups and specific toxicological endpoints, the author also examines extrapolation questions related to the use of short-term tests to predict long-term human carcinogenicity and birth defects. The book is comprehensive in scope and specific in detail; for those environmental health professions seeking to understand the toxicological models which underlay health risk assessments, Animal Extrapolation is a valuable information source.

  3. Vaccinology: principles and practice

    National Research Council Canada - National Science Library

    Morrow, John

    2012-01-01

    ... principles to implementation. This is an authoritative textbook that details a comprehensive and systematic approach to the science of vaccinology focusing on not only basic science, but the many stages required to commercialize...

  4. On the invariance principle

    Energy Technology Data Exchange (ETDEWEB)

    Moller-Nielsen, Thomas [University of Oxford (United Kingdom)

    2014-07-01

    Physicists and philosophers have long claimed that the symmetries of our physical theories - roughly speaking, those transformations which map solutions of the theory into solutions - can provide us with genuine insight into what the world is really like. According to this 'Invariance Principle', only those quantities which are invariant under a theory's symmetries should be taken to be physically real, while those quantities which vary under its symmetries should not. Physicists and philosophers, however, are generally divided (or, indeed, silent) when it comes to explaining how such a principle is to be justified. In this paper, I spell out some of the problems inherent in other theorists' attempts to justify this principle, and sketch my own proposed general schema for explaining how - and when - the Invariance Principle can indeed be used as a legitimate tool of metaphysical inference.

  5. Principles of applied statistics

    National Research Council Canada - National Science Library

    Cox, D. R; Donnelly, Christl A

    2011-01-01

    .... David Cox and Christl Donnelly distil decades of scientific experience into usable principles for the successful application of statistics, showing how good statistical strategy shapes every stage of an investigation...

  6. Minimum entropy production principle

    Czech Academy of Sciences Publication Activity Database

    Maes, C.; Netočný, Karel

    2013-01-01

    Roč. 8, č. 7 (2013), s. 9664-9677 ISSN 1941-6016 Institutional support: RVO:68378271 Keywords : MINEP Subject RIV: BE - Theoretical Physics http://www.scholarpedia.org/article/Minimum_entropy_production_principle

  7. Global ethics and principlism.

    Science.gov (United States)

    Gordon, John-Stewart

    2011-09-01

    This article examines the special relation between common morality and particular moralities in the four-principles approach and its use for global ethics. It is argued that the special dialectical relation between common morality and particular moralities is the key to bridging the gap between ethical universalism and relativism. The four-principles approach is a good model for a global bioethics by virtue of its ability to mediate successfully between universal demands and cultural diversity. The principle of autonomy (i.e., the idea of individual informed consent), however, does need to be revised so as to make it compatible with alternatives such as family- or community-informed consent. The upshot is that the contribution of the four-principles approach to global ethics lies in the so-called dialectical process and its power to deal with cross-cultural issues against the background of universal demands by joining them together.

  8. PET/TAC: Basic principles, physiological variants and artifacts; PET/TAC: Generalidades, variantes fisiologicas y artefactos

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez V, A.M. [Especialista en Medicina Nuclear, Profa. Depto. Radiologia de la Facultad de Medicina, Universidad Complutense de Madrid, Madrid (Spain)

    2007-07-01

    This presentation is about the basic principles, physiologic variants and devices that work in the PET/TAC technique. Next the conclusions obtained in the same one are presented: For a correct evaluation of the PET/TAC images with FDG is necessary the knowledge of the image acquisition technique, as well as of the physiologic distribution of the FDG, variants of the normality, benign causes of captation and more frequent devices. The introduction of this hybrid procedure allows the correct anatomical localization and identification of the deposits of FDG largely avoiding false or doubtful interpretations, but it can also originate not specific devices existent in the conventional PET. The previous knowledge of the possible devices will make possible in certain cases its elimination and in other its identification avoiding incorrect interpretations. (Author)

  9. Microprocessors principles and applications

    CERN Document Server

    Debenham, Michael J

    1979-01-01

    Microprocessors: Principles and Applications deals with the principles and applications of microprocessors and covers topics ranging from computer architecture and programmed machines to microprocessor programming, support systems and software, and system design. A number of microprocessor applications are considered, including data processing, process control, and telephone switching. This book is comprised of 10 chapters and begins with a historical overview of computers and computing, followed by a discussion on computer architecture and programmed machines, paying particular attention to t

  10. Electrical and electronic principles

    CERN Document Server

    Knight, S A

    1991-01-01

    Electrical and Electronic Principles, 2, Second Edition covers the syllabus requirements of BTEC Unit U86/329, including the principles of control systems and elements of data transmission. The book first tackles series and parallel circuits, electrical networks, and capacitors and capacitance. Discussions focus on flux density, electric force, permittivity, Kirchhoff's laws, superposition theorem, arrangement of resistors, internal resistance, and powers in a circuit. The text then takes a look at capacitors in circuit, magnetism and magnetization, electromagnetic induction, and alternating v

  11. Microwave system engineering principles

    CERN Document Server

    Raff, Samuel J

    1977-01-01

    Microwave System Engineering Principles focuses on the calculus, differential equations, and transforms of microwave systems. This book discusses the basic nature and principles that can be derived from thermal noise; statistical concepts and binomial distribution; incoherent signal processing; basic properties of antennas; and beam widths and useful approximations. The fundamentals of propagation; LaPlace's Equation and Transmission Line (TEM) waves; interfaces between homogeneous media; modulation, bandwidth, and noise; and communications satellites are also deliberated in this text. This bo

  12. Electrical and electronic principles

    CERN Document Server

    Knight, SA

    1988-01-01

    Electrical and Electronic Principles, 3 focuses on the principles involved in electrical and electronic circuits, including impedance, inductance, capacitance, and resistance.The book first deals with circuit elements and theorems, D.C. transients, and the series circuits of alternating current. Discussions focus on inductance and resistance in series, resistance and capacitance in series, power factor, impedance, circuit magnification, equation of charge, discharge of a capacitor, transfer of power, and decibels and attenuation. The manuscript then examines the parallel circuits of alternatin

  13. Remark on Heisenberg's principle

    International Nuclear Information System (INIS)

    Noguez, G.

    1988-01-01

    Application of Heisenberg's principle to inertial frame transformations allows a distinction between three commutative groups of reciprocal transformations along one direction: Galilean transformations, dual transformations, and Lorentz transformations. These are three conjugate groups and for a given direction, the related commutators are all proportional to one single conjugation transformation which compensates for uniform and rectilinear motions. The three transformation groups correspond to three complementary ways of measuring space-time as a whole. Heisenberg's Principle then gets another explanation [fr

  14. Powering biomedical devices

    CERN Document Server

    Romero, Edwar

    2013-01-01

    From exoskeletons to neural implants, biomedical devices are no less than life-changing. Compact and constant power sources are necessary to keep these devices running efficiently. Edwar Romero's Powering Biomedical Devices reviews the background, current technologies, and possible future developments of these power sources, examining not only the types of biomedical power sources available (macro, mini, MEMS, and nano), but also what they power (such as prostheses, insulin pumps, and muscular and neural stimulators), and how they work (covering batteries, biofluids, kinetic and ther

  15. Fusion devices

    International Nuclear Information System (INIS)

    Fowler, T.K.

    1977-01-01

    Three types of thermonuclear fusion devices currently under development are reviewed for an electric utilities management audience. Overall design features of laser fusion, tokamak, and magnetic mirror type reactors are described and illustrated. Thrusts and trends in current research on these devices that promise to improve performance are briefly reviewed. Twenty photographs and drawings are included

  16. BRAKE DEVICE

    Science.gov (United States)

    O'Donnell, T.J.

    1959-03-10

    A brake device is described for utilization in connection with a control rod. The device comprises a pair of parallelogram link mechanisms, a control rod moveable rectilinearly therebetween in opposite directions, and shoes resiliently supported by the mechanism for frictional engagement with the control rod.

  17. Use of integrity control and automatic start of reserve in a multi-channel temperature and flow rate control device

    International Nuclear Information System (INIS)

    Strzalkowski, L.

    1975-01-01

    A way to increase reliability of process quantity control is control of the integrity of the control plants themselves. The possibilities of integrity control on control devices having simply duplicated control channels or working on the basis of the ''two-from-three'' principle are valued. A highly reliable integrity control is possible by use of test signals. For an appropriate control device, structure and function of the assemblies are described. The integrity control device may be used in the water coolant temperature and flow rate control system for all technological channels of the research reactor ''Maria''

  18. PLASMA DEVICE

    Science.gov (United States)

    Gow, J.D.; Wilcox, J.M.

    1961-12-26

    A device is designed for producing and confining highenergy plasma from which neutrons are generated in copious quantities. A rotating sheath of electrons is established in a radial electric field and axial magnetic field produced within the device. The electron sheath serves as a strong ionizing medium to gas introdueed thereto and also functions as an extremely effective heating mechanism to the resulting plasma. In addition, improved confinement of the plasma is obtained by ring magnetic mirror fields produced at the ends of the device. Such ring mirror fields are defined by the magnetic field lines at the ends of the device diverging radially outward from the axis of the device and thereafter converging at spatial annular surfaces disposed concentrically thereabout. (AFC)

  19. Nuclear detectors. Physical principles of operation

    International Nuclear Information System (INIS)

    Pochet, Th.

    2005-01-01

    Nuclear detection is used in several domains of activity from the physics research, the nuclear industry, the medical and industrial sectors, the security etc. The particles of interest are the α, β, X, γ and neutrons. This article treats of the basic physical properties of radiation detection, the general characteristics of the different classes of existing detectors and the particle/matter interactions: 1 - general considerations; 2 - measurement types and definitions: pulse mode, current mode, definitions; 3 - physical principles of direct detection: introduction and general problem, materials used in detection, simple device, junction semiconductor device, charges generation and transport inside matter, signal generation; 4 - physical principles of indirect detection: introduction, scintillation mechanisms, definition and properties of scintillators. (J.S.)

  20. Dosimetry work and calculations in connection with the irradiation of large devices in the high flux materials testing reactor BR2

    International Nuclear Information System (INIS)

    De Raedt, C.; Leenders, L.; Tourwe, H.; Farrar, H. IV.

    1982-01-01

    For about fifteen years the high flux reactor BR2 has been involved in the testing of fast reactor fuel pins. In order to simulate the fast reactor neutron environment most devices are irradiated under cadmium screen, cutting off the thermal flux component. Extensive neutronic calculations are performed to help the optimization of the fuel bundle design. The actual experiments are preceded by irradiations of their mock-ups in BR02, the zero power model of BR2. The mock-up irradiations, supported by supplementary calculations, are performed for the determination of the main neutronic characteristics of the irradiation proper in BR2 and for the determination of the corresponding operation data. At the end of the BR2 irradiation, the experimental results, such as burn-ups, neutron fluences, helium production in the fuel pin claddings, etc. are correlated by neutronic calculations in order to examine the consistency of the post-irradiation results and to validate the routine calculation procedure and cross-section data employed. A comparison is made in this paper between neutronic calculation results and some post-irradiation data for MOL 7D, a cadmium screened sodium cooled loop containing a nineteen fuel pin bundle

  1. Principle of the electrically induced Transient Current Technique

    Science.gov (United States)

    Bronuzzi, J.; Moll, M.; Bouvet, D.; Mapelli, A.; Sallese, J. M.

    2018-05-01

    In the field of detector development for High Energy Physics, the so-called Transient Current Technique (TCT) is used to characterize the electric field profile and the charge trapping inside silicon radiation detectors where particles or photons create electron-hole pairs in the bulk of a semiconductor device, as PiN diodes. In the standard approach, the TCT signal originates from the free carriers generated close to the surface of a silicon detector, by short pulses of light or by alpha particles. This work proposes a new principle of charge injection by means of lateral PN junctions implemented in one of the detector electrodes, called the electrical TCT (el-TCT). This technique is fully compatible with CMOS technology and therefore opens new perspectives for assessment of radiation detectors performances.

  2. Principles and Practices of EU External Representation.

    NARCIS (Netherlands)

    Blockmans, S.; Wessel, Ramses A.

    2012-01-01

    With this working paper, CLEER aims to offer a better insight into selected legal aspects concerning the European Union’s redefined diplomatic persona. In particular, the working paper will address issues pertaining to the Lisbon Treaty’s organising principles of EU external action, both under EU

  3. Identification of microfluidic two-phase flow patterns in lab-on-chip devices.

    Science.gov (United States)

    Yang, Zhaochu; Dong, Tao; Halvorsen, Einar

    2014-01-01

    This work describes a capacitive sensor for identification of microfluidic two-phase flow in lab-on-chip devices. With interdigital electrodes and thin insulation layer utilized, this sensor is capable of being integrated with the microsystems easily. Transducing principle and design considerations are presented with respect to the microfluidic gas/liquid flow patterns. Numerical simulation results verify the operational principle. And the factors affecting the performance of the sensor are discussed. Besides, a feasible process flow for the fabrication is also proposed.

  4. Selection of Air Terminal Device

    DEFF Research Database (Denmark)

    Nielsen, Peter V.

    This paper discusses the selection of the air terminal device for the experiments and numerical prediction in the International Energy Agency Annex 20 work: Air Flow Pattern within Buildings,......This paper discusses the selection of the air terminal device for the experiments and numerical prediction in the International Energy Agency Annex 20 work: Air Flow Pattern within Buildings,...

  5. Documentation of Appliances & Interaction Devices

    DEFF Research Database (Denmark)

    2004-01-01

    The interaction devices and appliances explored in the WorkSPACE project, address spatial computing in the context of work. We have developed and explored a range of appliances and interaction devices. The scope has been to develop tools for support of collaboration by mixing digital and physical...

  6. Fibre optic communication key devices

    CERN Document Server

    Grote, Norbert

    2017-01-01

    The book gives an in-depth description of key devices of current and next generation fibre optic communication networks. Devices treated include semiconductor lasers, optical amplifiers, modulators, wavelength filters and other passives, detectors, all-optical switches, but relevant properties of optical fibres and network aspects are included as well. The presentations include the physical principles underlying the various devices, technologies used for their realization, typical performance characteristics and limitations, but development trends towards more advanced components are also illustrated. This new edition of a successful book was expanded and updated extensively. The new edition covers among others lasers for optical communication, optical switches, hybrid integration, monolithic integration and silicon photonics. The main focus is on Indium phosphide-based structures but silicon photonics is included as well. The book covers relevant principles, state-of-the-art implementations, status of curren...

  7. Implantable biomedical microsystems design principles and applications

    CERN Document Server

    Bhunia, Swarup; Sawan, Mohamad

    2015-01-01

    Research and innovation in areas such as circuits, microsystems, packaging, biocompatibility, miniaturization, power supplies, remote control, reliability, and lifespan are leading to a rapid increase in the range of devices and corresponding applications in the field of wearable and implantable biomedical microsystems, which are used for monitoring, diagnosing, and controlling the health conditions of the human body. This book provides comprehensive coverage of the fundamental design principles and validation for implantable microsystems, as well as several major application areas. Each co

  8. Rotating detectors and Mach's principle

    International Nuclear Information System (INIS)

    Paola, R.D.M. de; Svaiter, N.F.

    2000-08-01

    In this work we consider a quantum version of Newton s bucket experiment in a fl;at spacetime: we take an Unruh-DeWitt detector in interaction with a real massless scalar field. We calculate the detector's excitation rate when it is uniformly rotating around some fixed point and the field is prepared in the Minkowski vacuum and also when the detector is inertial and the field is in the Trocheries-Takeno vacuum state. These results are compared and the relations with Mach's principle are discussed. (author)

  9. A Principle of Intentionality.

    Science.gov (United States)

    Turner, Charles K

    2017-01-01

    The mainstream theories and models of the physical sciences, including neuroscience, are all consistent with the principle of causality. Wholly causal explanations make sense of how things go, but are inherently value-neutral, providing no objective basis for true beliefs being better than false beliefs, nor for it being better to intend wisely than foolishly. Dennett (1987) makes a related point in calling the brain a syntactic (procedure-based) engine. He says that you cannot get to a semantic (meaning-based) engine from there. He suggests that folk psychology revolves around an intentional stance that is independent of the causal theories of the brain, and accounts for constructs such as meanings, agency, true belief, and wise desire. Dennett proposes that the intentional stance is so powerful that it can be developed into a valid intentional theory. This article expands Dennett's model into a principle of intentionality that revolves around the construct of objective wisdom. This principle provides a structure that can account for all mental processes, and for the scientific understanding of objective value. It is suggested that science can develop a far more complete worldview with a combination of the principles of causality and intentionality than would be possible with scientific theories that are consistent with the principle of causality alone.

  10. General principles of radiotherapy

    International Nuclear Information System (INIS)

    Easson, E.C.

    1985-01-01

    The daily practice of any established branch of medicine should be based on some acceptable principles. This chapter is concerned with the general principles on which the radiotherapy of the Manchester school is based. Though many radiotherapists in other centres would doubtless accept these principles, there are sufficiently wide differences in practice throughout the world to suggest that some therapists adhere to a fundamentally different philosophy. The authors believe it is important, especially for those beginning their formal training in radiotherapy, to subscribe to an internally consistent school of thought, employing methods of treatment for each type of lesion in each anatomical site that are based on accepted principles and subjected to continuous rigorous scrutiny to test their effectiveness. Not only must each therapeutic technique be evaluated, but the underlying principles too must be questioned if and when this seems indicated. It is a feature of this hospital that similar lesions are all treated by the same technique, so long as statistical evidence justifies such a policy. All members of the staff adhere to the accepted policy until or unless reliable reasons are adduced to change this policy

  11. The traveltime holographic principle

    Science.gov (United States)

    Huang, Yunsong; Schuster, Gerard T.

    2015-01-01

    Fermat's interferometric principle is used to compute interior transmission traveltimes τpq from exterior transmission traveltimes τsp and τsq. Here, the exterior traveltimes are computed for sources s on a boundary B that encloses a volume V of interior points p and q. Once the exterior traveltimes are computed, no further ray tracing is needed to calculate the interior times τpq. Therefore this interferometric approach can be more efficient than explicitly computing interior traveltimes τpq by ray tracing. Moreover, the memory requirement of the traveltimes is reduced by one dimension, because the boundary B is of one fewer dimension than the volume V. An application of this approach is demonstrated with interbed multiple (IM) elimination. Here, the IMs in the observed data are predicted from the migration image and are subsequently removed by adaptive subtraction. This prediction is enabled by the knowledge of interior transmission traveltimes τpq computed according to Fermat's interferometric principle. We denote this principle as the `traveltime holographic principle', by analogy with the holographic principle in cosmology where information in a volume is encoded on the region's boundary.

  12. Venturi purification device and its application in purification of gaseous waste of nuclear facilities

    International Nuclear Information System (INIS)

    Kong Jinsong; Yu Ren; Yang Huanlei

    2013-01-01

    The working principle of Venturi purification device and its purification of aerosol have been described. Then, taking the gaseous iodine as an example, the absorption process of insoluble gas pollutants is discussed, the calculation methods of the gas-liquid contact area, mass transfer rate and efficiency of mass transfer are educed, and the factors that affect the efficiency of mass transfer are analyzed. (authors)

  13. Ethical principles of scientific communication

    Directory of Open Access Journals (Sweden)

    Baranov G. V.

    2017-03-01

    Full Text Available the article presents the principles of ethical management of scientific communication. The author approves the priority of ethical principle of social responsibility of the scientist.

  14. A cyclically actuated electrolytic drug delivery device

    KAUST Repository

    Yi, Ying

    2015-01-01

    This work, focusing on an implantable drug delivery system, presents the first prototype electrolytic pump that combines a catalytic reformer and a cyclically actuated mode. These features improve the release performance and extend the lifetime of the device. Using our platinum (Pt)-coated carbon fiber mesh that acts as a catalytic reforming element, the cyclical mode is improved because the faster recombination rate allows for a shorter cycling time for drug delivery. Another feature of our device is that it uses a solid-drug-in-reservoir (SDR) approach, which allows small amounts of a solid drug to be dissolved in human fluid, forming a reproducible drug solution for long-term therapies. We have conducted proof-of-principle drug delivery studies using such an electrolytic pump and solvent blue 38 as the drug substitute. These tests demonstrate power-controlled and pulsatile release profiles of the chemical substance, as well as the feasibility of this device. A drug delivery rate of 11.44 ± 0.56 μg min-1 was achieved by using an input power of 4 mW for multiple pulses, which indicates the stability of our system. © The Royal Society of Chemistry 2015.

  15. Sealing devices

    International Nuclear Information System (INIS)

    Coulson, R.A.

    1980-01-01

    A sealing device for minimising the leakage of toxic or radioactive contaminated environments through a biological shield along an opening through which a flexible component moves that penetrates the shield. The sealing device comprises an outer tubular member which extends over a length not less than the maximum longitudinal movement of the component along the opening. An inner sealing block is located intermediate the length of the component by connectors and is positioned in the bore of the outer tubular member to slide in the bore and effect a seal over the entire longitudinal movement of the component. The cross-section of the device may be circular and the block may be of polytetrafluoroethylene or of nylon impregnated with molybdenum or may be metallic. A number of the sealing devices may be combined into an assembly for a plurality of adjacent longitudinally movable components, each adapted to sustain a tensile load, providing the various drives of a master-slave manipulator. (author)

  16. Ferroelectric devices

    CERN Document Server

    Uchino, Kenji

    2009-01-01

    Updating its bestselling predecessor, Ferroelectric Devices, Second Edition assesses the last decade of developments-and setbacks-in the commercialization of ferroelectricity. Field pioneer and esteemed author Uchino provides insight into why this relatively nascent and interdisciplinary process has failed so far without a systematic accumulation of fundamental knowledge regarding materials and device development.Filling the informational void, this collection of information reviews state-of-the-art research and development trends reflecting nano and optical technologies, environmental regulat

  17. Ethical principles and theories.

    Science.gov (United States)

    Schultz, R C

    1993-01-01

    Ethical theory about what is right and good in human conduct lies behind the issues practitioners face and the codes they turn to for guidance; it also provides guidance for actions, practices, and policies. Principles of obligation, such as egoism, utilitarianism, and deontology, offer general answers to the question, "Which acts/practices are morally right?" A re-emerging alternative to using such principles to assess individual conduct is to center normative theory on personal virtues. For structuring society's institutions, principles of social justice offer alternative answers to the question, "How should social benefits and burdens be distributed?" But human concerns about right and good call for more than just theoretical responses. Some critics (eg, the postmodernists and the feminists) charge that normative ethical theorizing is a misguided enterprise. However, that charge should be taken as a caution and not as a refutation of normative ethical theorizing.

  18. Principles of musical acoustics

    CERN Document Server

    Hartmann, William M

    2013-01-01

    Principles of Musical Acoustics focuses on the basic principles in the science and technology of music. Musical examples and specific musical instruments demonstrate the principles. The book begins with a study of vibrations and waves, in that order. These topics constitute the basic physical properties of sound, one of two pillars supporting the science of musical acoustics. The second pillar is the human element, the physiological and psychological aspects of acoustical science. The perceptual topics include loudness, pitch, tone color, and localization of sound. With these two pillars in place, it is possible to go in a variety of directions. The book treats in turn, the topics of room acoustics, audio both analog and digital, broadcasting, and speech. It ends with chapters on the traditional musical instruments, organized by family. The mathematical level of this book assumes that the reader is familiar with elementary algebra. Trigonometric functions, logarithms and powers also appear in the book, but co...

  19. Itch Management: General Principles.

    Science.gov (United States)

    Misery, Laurent

    2016-01-01

    Like pain, itch is a challenging condition that needs to be managed. Within this setting, the first principle of itch management is to get an appropriate diagnosis to perform an etiology-oriented therapy. In several cases it is not possible to treat the cause, the etiology is undetermined, there are several causes, or the etiological treatment is not effective enough to alleviate itch completely. This is also why there is need for symptomatic treatment. In all patients, psychological support and associated pragmatic measures might be helpful. General principles and guidelines are required, yet patient-centered individual care remains fundamental. © 2016 S. Karger AG, Basel.

  20. Principles of statistics

    CERN Document Server

    Bulmer, M G

    1979-01-01

    There are many textbooks which describe current methods of statistical analysis, while neglecting related theory. There are equally many advanced textbooks which delve into the far reaches of statistical theory, while bypassing practical applications. But between these two approaches is an unfilled gap, in which theory and practice merge at an intermediate level. Professor M. G. Bulmer's Principles of Statistics, originally published in 1965, was created to fill that need. The new, corrected Dover edition of Principles of Statistics makes this invaluable mid-level text available once again fo

  1. Principle and preliminary results of the whole-body scintigraphic unit Omniview

    International Nuclear Information System (INIS)

    Methlin, G.; Jung, G.M.; Gerard, G.

    The Picker Company has recently launched a system adapted to its Dynacamera for the production of whole-body scintigraphs. For the last few months the radioisotopes service of the Strasbourg Anti-Cancer Centre has been in possession of such a system, intended mainly for systematic research on metastases, especially of the bone, and on the degree of extension of tumours. On the basis of the short experience so far acquired the report is limited to an outline of the working principle of this device, the presentation of preliminary documents and a few critical remarks summing up first impressions [fr

  2. Application of the maximum entropy production principle to electrical systems

    International Nuclear Information System (INIS)

    Christen, Thomas

    2006-01-01

    For a simple class of electrical systems, the principle of the maximum entropy production rate (MaxEP) is discussed. First, we compare the MaxEP principle and the principle of the minimum entropy production rate and illustrate the superiority of the MaxEP principle for the example of two parallel constant resistors. Secondly, we show that the Steenbeck principle for the electric arc as well as the ohmic contact behaviour of space-charge limited conductors follow from the MaxEP principle. In line with work by Dewar, the investigations seem to suggest that the MaxEP principle can also be applied to systems far from equilibrium, provided appropriate information is available that enters the constraints of the optimization problem. Finally, we apply the MaxEP principle to a mesoscopic system and show that the universal conductance quantum, e 2 /h, of a one-dimensional ballistic conductor can be estimated

  3. Geometry and Cloaking Devices

    Science.gov (United States)

    Ochiai, T.; Nacher, J. C.

    2011-09-01

    Recently, the application of geometry and conformal mappings to artificial materials (metamaterials) has attracted the attention in various research communities. These materials, characterized by a unique man-made structure, have unusual optical properties, which materials found in nature do not exhibit. By applying the geometry and conformal mappings theory to metamaterial science, it may be possible to realize so-called "Harry Potter cloaking device". Although such a device is still in the science fiction realm, several works have shown that by using such metamaterials it may be possible to control the direction of the electromagnetic field at will. We could then make an object hidden inside of a cloaking device. Here, we will explain how to design invisibility device using differential geometry and conformal mappings.

  4. PHASAR-based WDM-devices: principles, design and applications

    NARCIS (Netherlands)

    Smit, M.K.; Dam, van C.

    1996-01-01

    Wavelength multiplexers, demultiplexers and routers based on optical phased arrays play a key role in multiwavelength telecommunication links and networks. In this paper, a detailed description of phased-array operation and design is presented and an overview is given of the most important

  5. Photoelectrochemical solar water splitting: From basic principles to advanced devices

    Directory of Open Access Journals (Sweden)

    Bandar Y.Alfaifi

    2018-02-01

    Full Text Available Photoelectrochemical water splitting (PEC offers a promising path for sustainable generation of hydrogen fuel. However, improving solar fuel water splitting efficiency facing tremendous challenges, due to the energy loss related to fast recombination of the photogenerated charge carriers, electrode degradation, as well as limited light harvesting. This review focuses on the brief introduction of basic fundamental of PEC water splitting and the concept of various types of water splitting approaches. Numerous engineering strategies for the investgating of the higher efficiency of the PEC, including charge separation, light harvesting, and co-catalysts doping, have been discussed. Moreover, recent remarkable progress and developments for PEC water splitting with some promising materials are discussed. Recent advanced applications of PEC are also reviewed. Finally, the review concludes with a summary and future outlook of this hot field.

  6. Microfluidic device for continuous single cells analysis via Raman spectroscopy enhanced by integrated plasmonic nanodimers

    DEFF Research Database (Denmark)

    Perozziello, Gerardo; Candeloro, Patrizio; De Grazia, Antonio

    2016-01-01

    In this work a Raman flow cytometer is presented. It consists of a microfluidic device that takes advantages of the basic principles of Raman spectroscopy and flow cytometry. The microfluidic device integrates calibrated microfluidic channels-where the cells can flow one-by-one -, allowing single...... cell Raman analysis. The microfluidic channel integrates plasmonic nanodimers in a fluidic trapping region. In this way it is possible to perform Enhanced Raman Spectroscopy on single cell. These allow a label-free analysis, providing information about the biochemical content of membrane and cytoplasm...

  7. Principles of Good Practice in SoTL

    Science.gov (United States)

    Felten, Peter

    2013-01-01

    For the Scholarship of Teaching and Learning (SoTL) to be understood as significant intellectual work in the academy, SoTL practitioners need to identify shared principles of good practice. While honoring the diversity of SoTL in its many forms across the globe, such principles can serve as a heuristic for assessing work in our field. These…

  8. Quantum equivalence principle without mass superselection

    International Nuclear Information System (INIS)

    Hernandez-Coronado, H.; Okon, E.

    2013-01-01

    The standard argument for the validity of Einstein's equivalence principle in a non-relativistic quantum context involves the application of a mass superselection rule. The objective of this work is to show that, contrary to widespread opinion, the compatibility between the equivalence principle and quantum mechanics does not depend on the introduction of such a restriction. For this purpose, we develop a formalism based on the extended Galileo group, which allows for a consistent handling of superpositions of different masses, and show that, within such scheme, mass superpositions behave as they should in order to obey the equivalence principle. - Highlights: • We propose a formalism for consistently handling, within a non-relativistic quantum context, superpositions of states with different masses. • The formalism utilizes the extended Galileo group, in which mass is a generator. • The proposed formalism allows for the equivalence principle to be satisfied without the need of imposing a mass superselection rule

  9. The Principles of Readability

    Science.gov (United States)

    DuBay, William H.

    2004-01-01

    The principles of readability are in every style manual. Readability formulas are in every writing aid. What is missing is the research and theory on which they stand. This short review of readability research spans 100 years. The first part covers the history of adult literacy studies in the U.S., establishing the stratified nature of the adult…

  10. Principles of electrodynamics

    CERN Document Server

    Schwartz, Melvin

    1972-01-01

    This advanced undergraduate- and graduate-level text by the 1988 Nobel Prize winner establishes the subject's mathematical background, reviews the principles of electrostatics, then introduces Einstein's special theory of relativity and applies it throughout the book in topics ranging from Gauss' theorem and Coulomb's law to electric and magnetic susceptibility.

  11. Principles of Bridge Reliability

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle; Nowak, Andrzej S.

    The paper gives a brief introduction to the basic principles of structural reliability theory and its application to bridge engineering. Fundamental concepts like failure probability and reliability index are introduced. Ultimate as well as serviceability limit states for bridges are formulated......, and as an example the reliability profile and a sensitivity analyses for a corroded reinforced concrete bridge is shown....

  12. The Idiom Principle Revisited

    Science.gov (United States)

    Siyanova-Chanturia, Anna; Martinez, Ron

    2015-01-01

    John Sinclair's Idiom Principle famously posited that most texts are largely composed of multi-word expressions that "constitute single choices" in the mental lexicon. At the time that assertion was made, little actual psycholinguistic evidence existed in support of that holistic, "single choice," view of formulaic language. In…

  13. The Pauli Exclusion Principle

    Indian Academy of Sciences (India)

    his exclusion principle, the quantum theory was a mess. Moreover, it could ... This is a function of all the coordinates and 'internal variables' such as spin, of all the ... must remain basically the same (ie change by a phase factor at most) if we ...

  14. The traveltime holographic principle

    KAUST Repository

    Huang, Y.; Schuster, Gerard T.

    2014-01-01

    Fermat's interferometric principle is used to compute interior transmission traveltimes τpq from exterior transmission traveltimes τsp and τsq. Here, the exterior traveltimes are computed for sources s on a boundary B that encloses a volume V of interior points p and q. Once the exterior traveltimes are computed, no further ray tracing is needed to calculate the interior times τpq. Therefore this interferometric approach can be more efficient than explicitly computing interior traveltimes τpq by ray tracing. Moreover, the memory requirement of the traveltimes is reduced by one dimension, because the boundary B is of one fewer dimension than the volume V. An application of this approach is demonstrated with interbed multiple (IM) elimination. Here, the IMs in the observed data are predicted from the migration image and are subsequently removed by adaptive subtraction. This prediction is enabled by the knowledge of interior transmission traveltimes τpq computed according to Fermat's interferometric principle. We denote this principle as the ‘traveltime holographic principle’, by analogy with the holographic principle in cosmology where information in a volume is encoded on the region's boundary.

  15. Principles of Protocol Design

    DEFF Research Database (Denmark)

    Sharp, Robin

    This is a new and updated edition of a book first published in 1994. The book introduces the reader to the principles used in the construction of a large range of modern data communication protocols, as used in distributed computer systems of all kinds. The approach taken is rather a formal one...

  16. The traveltime holographic principle

    KAUST Repository

    Huang, Y.

    2014-11-06

    Fermat\\'s interferometric principle is used to compute interior transmission traveltimes τpq from exterior transmission traveltimes τsp and τsq. Here, the exterior traveltimes are computed for sources s on a boundary B that encloses a volume V of interior points p and q. Once the exterior traveltimes are computed, no further ray tracing is needed to calculate the interior times τpq. Therefore this interferometric approach can be more efficient than explicitly computing interior traveltimes τpq by ray tracing. Moreover, the memory requirement of the traveltimes is reduced by one dimension, because the boundary B is of one fewer dimension than the volume V. An application of this approach is demonstrated with interbed multiple (IM) elimination. Here, the IMs in the observed data are predicted from the migration image and are subsequently removed by adaptive subtraction. This prediction is enabled by the knowledge of interior transmission traveltimes τpq computed according to Fermat\\'s interferometric principle. We denote this principle as the ‘traveltime holographic principle’, by analogy with the holographic principle in cosmology where information in a volume is encoded on the region\\'s boundary.

  17. Fermat's Principle Revisited.

    Science.gov (United States)

    Kamat, R. V.

    1991-01-01

    A principle is presented to show that, if the time of passage of light is expressible as a function of discrete variables, one may dispense with the more general method of the calculus of variations. The calculus of variations and the alternative are described. The phenomenon of mirage is discussed. (Author/KR)

  18. Principles of economics textbooks

    DEFF Research Database (Denmark)

    Madsen, Poul Thøis

    2012-01-01

    Has the financial crisis already changed US principles of economics textbooks? Rather little has changed in individual textbooks, but taken as a whole ten of the best-selling textbooks suggest rather encompassing changes of core curriculum. A critical analysis of these changes shows how individual...

  19. Improvement of light harvesting and device performance of dye-sensitized solar cells using rod-like nanocrystal TiO{sub 2} overlay coating on TiO{sub 2} nanoparticle working electrode

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xueyang; Fang, Jian [Institute for Frontier Materials, Deakin University, VIC 3220 (Australia); Gao, Mei [CSIRO Materials Science and Engineering, Melbourne, VIC 3169 (Australia); Wang, Hongxia [Institute for Frontier Materials, Deakin University, VIC 3220 (Australia); Yang, Weidong [CSIRO Materials Science and Engineering, Melbourne, VIC 3169 (Australia); Lin, Tong, E-mail: tong.lin@deakin.edu.au [Institute for Frontier Materials, Deakin University, VIC 3220 (Australia)

    2015-02-01

    Novel TiO{sub 2} single crystalline nanorods were synthesized by electrospinning and hydrothermal treatment. The role of the TiO{sub 2} nanorods on TiO{sub 2} nanoparticle electrode in improvement of light harvesting and photovoltaic properties of dye-sensitized solar cells (DSSCs) was examined. Although the TiO{sub 2} nanorods had lower dye loading than TiO{sub 2} nanoparticle, they showed higher light utilization behaviour. Electron transfer in TiO{sub 2} nanorods received less resistance than that in TiO{sub 2} nanoparticle aggregation. By just applying a thin layer of TiO{sub 2} nanorods on TiO{sub 2} nanoparticle working electrode, the DSSC device light harvesting ability and energy conversion efficiency were improved significantly. The thickness of the nanorod layer in the working electrode played an important role in determining the photovoltaic property of DSSCs. An energy conversion efficiency as high as 6.6% was found on a DSSC device with the working electrode consisting of a 12 μm think TiO{sub 2} nanoparticle layer covered with 3 μm thick TiO{sub 2} nanorods. The results obtained from this study may benefit further design of highly efficient DSSCs. - Highlights: • Single crystalline TiO{sub 2} nanorods were prepared for DSSC application. • TiO{sub 2} nanorods show effective light scattering performance. • TiO{sub 2} nanorods have higher electron transfer efficiency than TiO{sub 2} nanoparticles. • TiO{sub 2} nanorods on TiO{sub 2} nanoparticle electrode improve DSSC efficiency.

  20. Improvement of light harvesting and device performance of dye-sensitized solar cells using rod-like nanocrystal TiO2 overlay coating on TiO2 nanoparticle working electrode

    International Nuclear Information System (INIS)

    Liu, Xueyang; Fang, Jian; Gao, Mei; Wang, Hongxia; Yang, Weidong; Lin, Tong

    2015-01-01

    Novel TiO 2 single crystalline nanorods were synthesized by electrospinning and hydrothermal treatment. The role of the TiO 2 nanorods on TiO 2 nanoparticle electrode in improvement of light harvesting and photovoltaic properties of dye-sensitized solar cells (DSSCs) was examined. Although the TiO 2 nanorods had lower dye loading than TiO 2 nanoparticle, they showed higher light utilization behaviour. Electron transfer in TiO 2 nanorods received less resistance than that in TiO 2 nanoparticle aggregation. By just applying a thin layer of TiO 2 nanorods on TiO 2 nanoparticle working electrode, the DSSC device light harvesting ability and energy conversion efficiency were improved significantly. The thickness of the nanorod layer in the working electrode played an important role in determining the photovoltaic property of DSSCs. An energy conversion efficiency as high as 6.6% was found on a DSSC device with the working electrode consisting of a 12 μm think TiO 2 nanoparticle layer covered with 3 μm thick TiO 2 nanorods. The results obtained from this study may benefit further design of highly efficient DSSCs. - Highlights: • Single crystalline TiO 2 nanorods were prepared for DSSC application. • TiO 2 nanorods show effective light scattering performance. • TiO 2 nanorods have higher electron transfer efficiency than TiO 2 nanoparticles. • TiO 2 nanorods on TiO 2 nanoparticle electrode improve DSSC efficiency

  1. Harm reduction principles for healthcare settings

    Directory of Open Access Journals (Sweden)

    Mary Hawk

    2017-10-01

    Full Text Available Abstract Background Harm reduction refers to interventions aimed at reducing the negative effects of health behaviors without necessarily extinguishing the problematic health behaviors completely. The vast majority of the harm reduction literature focuses on the harms of drug use and on specific harm reduction strategies, such as syringe exchange, rather than on the harm reduction philosophy as a whole. Given that a harm reduction approach can address other risk behaviors that often occur alongside drug use and that harm reduction principles have been applied to harms such as sex work, eating disorders, and tobacco use, a natural evolution of the harm reduction philosophy is to extend it to other health risk behaviors and to a broader healthcare audience. Methods Building on the extant literature, we used data from in-depth qualitative interviews with 23 patients and 17 staff members from an HIV clinic in the USA to describe harm reduction principles for use in healthcare settings. Results We defined six principles of harm reduction and generalized them for use in healthcare settings with patients beyond those who use illicit substances. The principles include humanism, pragmatism, individualism, autonomy, incrementalism, and accountability without termination. For each of these principles, we present a definition, a description of how healthcare providers can deliver interventions informed by the principle, and examples of how each principle may be applied in the healthcare setting. Conclusion This paper is one of the firsts to provide a comprehensive set of principles for universal harm reduction as a conceptual approach for healthcare provision. Applying harm reduction principles in healthcare settings may improve clinical care outcomes given that the quality of the provider-patient relationship is known to impact health outcomes and treatment adherence. Harm reduction can be a universal precaution applied to all individuals regardless of

  2. Harm reduction principles for healthcare settings.

    Science.gov (United States)

    Hawk, Mary; Coulter, Robert W S; Egan, James E; Fisk, Stuart; Reuel Friedman, M; Tula, Monique; Kinsky, Suzanne

    2017-10-24

    Harm reduction refers to interventions aimed at reducing the negative effects of health behaviors without necessarily extinguishing the problematic health behaviors completely. The vast majority of the harm reduction literature focuses on the harms of drug use and on specific harm reduction strategies, such as syringe exchange, rather than on the harm reduction philosophy as a whole. Given that a harm reduction approach can address other risk behaviors that often occur alongside drug use and that harm reduction principles have been applied to harms such as sex work, eating disorders, and tobacco use, a natural evolution of the harm reduction philosophy is to extend it to other health risk behaviors and to a broader healthcare audience. Building on the extant literature, we used data from in-depth qualitative interviews with 23 patients and 17 staff members from an HIV clinic in the USA to describe harm reduction principles for use in healthcare settings. We defined six principles of harm reduction and generalized them for use in healthcare settings with patients beyond those who use illicit substances. The principles include humanism, pragmatism, individualism, autonomy, incrementalism, and accountability without termination. For each of these principles, we present a definition, a description of how healthcare providers can deliver interventions informed by the principle, and examples of how each principle may be applied in the healthcare setting. This paper is one of the firsts to provide a comprehensive set of principles for universal harm reduction as a conceptual approach for healthcare provision. Applying harm reduction principles in healthcare settings may improve clinical care outcomes given that the quality of the provider-patient relationship is known to impact health outcomes and treatment adherence. Harm reduction can be a universal precaution applied to all individuals regardless of their disclosure of negative health behaviors, given that health

  3. On the application of a new principle and new class of materials for protection of the IC systems against high power electromagnetic pulses (HPEMP)

    International Nuclear Information System (INIS)

    Vuchkov, L.

    2008-01-01

    The aim of the present work is to make a survey of a new principle and the possibilities for scientific investigations, testing and industrial incorporation of a new shielding material and technology for protection of the IC systems against high energy electromagnetic pulses and ion irradiation. The main result of the implementation of the new- principle, material and technology is to increase the safety of the critical military and civilian infrastructures, land-based and space techniques, apparatuses, devices and their components against high energy electromagnetic pulses and ion irradiation, including electromagnetic weapon arsenal of the international terrorist groups. Key words: electromagnetic pulses, ion irradiation, IC electronic equipment degradation, shielding protection

  4. On the application of a new principle and new class of materials for protection of the IC systems against high power electromagnetic pulses (HPEMP)

    Energy Technology Data Exchange (ETDEWEB)

    Vuchkov, L. [Institute of Electrochemistry and Energy Systems, Bulgarian Academy of Scinces, Sofia (Bulgaria)

    2008-07-01

    The aim of the present work is to make a survey of a new principle and the possibilities for scientific investigations, testing and industrial incorporation of a new shielding material and technology for protection of the IC systems against high energy electromagnetic pulses and ion irradiation. The main result of the implementation of the new- principle, material and technology is to increase the safety of the critical military and civilian infrastructures, land-based and space techniques, apparatuses, devices and their components against high energy electromagnetic pulses and ion irradiation, including electromagnetic weapon arsenal of the international terrorist groups. Key words: electromagnetic pulses, ion irradiation, IC electronic equipment degradation, shielding protection.

  5. Guide device

    International Nuclear Information System (INIS)

    Brammer, C.M. Jr.

    1977-01-01

    Disclosed is a fuel handling guide tube centering device for use in nuclear reactors during fuel assembly handling operations. The device comprises an outer ring secured to the flange of a nuclear reactor pressure vessel, a rotatable table rotatably coupled to the outer ring, and a plurality of openings through the table. Truncated locating cones are positioned in each of the openings in the table, and the locating cones center the guide tube during fuel handling operations. The openings in the table are located such that each fuel assembly in the nuclear core may be aligned with one of the openings by a suitable rotation of the table. The locating cones thereby provide alignment between the fuel handling mechanism located in the guide tube and the individual fuel assemblies of the cone. The need for a device to provide alignment is especially critical for floating nuclear power plants, where wave motion may exist during fuel handling operations. 5 claims, 4 figures

  6. Surface Acoustic Wave Devices

    DEFF Research Database (Denmark)

    Dühring, Maria Bayard

    The work of this project is concerned with the simulation of surface acoustic waves (SAW) and topology optimization of SAW devices. SAWs are elastic vibrations that propagate along a material surface and are extensively used in electromechanical filters and resonators in telecommunication. A new...

  7. Optical Near-field Interactions and Forces for Optoelectronic Devices

    Science.gov (United States)

    Kohoutek, John Michael

    Throughout history, as a particle view of the universe began to take shape, scientists began to realize that these particles were attracted to each other and hence came up with theories, both analytical and empirical in nature, to explain their interaction. The interaction pair potential (empirical) and electromagnetics (analytical) theories, both help to explain not only the interaction between the basic constituents of matter, such as atoms and molecules, but also between macroscopic objects, such as two surfaces in close proximity. The electrostatic force, optical force, and Casimir force can be categorized as such forces. A surface plasmon (SP) is a collective motion of electrons generated by light at the interface between two mediums of opposite signs of dielectric susceptibility (e.g. metal and dielectric). Recently, surface plasmon resonance (SPR) has been exploited in many areas through the use of tiny antennas that work on similar principles as radio frequency (RF) antennas in optoelectronic devices. These antennas can produce a very high gradient in the electric field thereby leading to an optical force, similar in concept to the surface forces discussed above. The Atomic Force Microscope (AFM) was introduced in the 1980s at IBM. Here we report on its uses in measuring these aforementioned forces and fields, as well as actively modulating and manipulating multiple optoelectronic devices. We have shown that it is possible to change the far field radiation pattern of an optical antenna-integrated device through modification of the near-field of the device. This modification is possible through change of the local refractive index or reflectivity of the "hot spot" of the device, either mechanically or optically. Finally, we have shown how a mechanically active device can be used to detect light with high gain and low noise at room temperature. It is the aim of several of these integrated and future devices to be used for applications in molecular sensing

  8. Extremum principles for irreversible processes

    International Nuclear Information System (INIS)

    Hillert, M.; Agren, J.

    2006-01-01

    Hamilton's extremum principle is a powerful mathematical tool in classical mechanics. Onsager's extremum principle may play a similar role in irreversible thermodynamics and may also become a valuable tool. His principle may formally be regarded as a principle of maximum rate of entropy production but does not have a clear physical interpretation. Prigogine's principle of minimum rate of entropy production has a physical interpretation when it applies, but is not strictly valid except for a very special case

  9. Prototype of sun projector device

    Science.gov (United States)

    Ihsan; Dermawan, B.

    2016-11-01

    One way to introduce astronomy to public, including students, can be handled by solar observation. The widely held device for this purpose is coelostat and heliostat. Besides using filter attached to a device such as telescope, it is safest to use indirect way for observing the Sun. The main principle of the indirect way is deflecting the sun light and projecting image of the sun on a screen. We design and build a simple and low-cost astronomical device, serving as a supplement to increase public service, especially for solar observation. Without using any digital and intricate supporting equipment, people can watch and relish image of the Sun in comfortable condition, i.e. in a sheltered or shady place. Here we describe a design and features of our prototype of the device, which still, of course, has some limitations. In the future, this prototype can be improved for more efficient and useful applications.

  10. Organic Light-Emitting Transistors: Materials, Device Configurations, and Operations.

    Science.gov (United States)

    Zhang, Congcong; Chen, Penglei; Hu, Wenping

    2016-03-09

    Organic light-emitting transistors (OLETs) represent an emerging class of organic optoelectronic devices, wherein the electrical switching capability of organic field-effect transistors (OFETs) and the light-generation capability of organic light-emitting diodes (OLEDs) are inherently incorporated in a single device. In contrast to conventional OFETs and OLEDs, the planar device geometry and the versatile multifunctional nature of OLETs not only endow them with numerous technological opportunities in the frontier fields of highly integrated organic electronics, but also render them ideal scientific scaffolds to address the fundamental physical events of organic semiconductors and devices. This review article summarizes the recent advancements on OLETs in light of materials, device configurations, operation conditions, etc. Diverse state-of-the-art protocols, including bulk heterojunction, layered heterojunction and laterally arranged heterojunction structures, as well as asymmetric source-drain electrodes, and innovative dielectric layers, which have been developed for the construction of qualified OLETs and for shedding new and deep light on the working principles of OLETs, are highlighted by addressing representative paradigms. This review intends to provide readers with a deeper understanding of the design of future OLETs. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Madrid principles of Nagorno-Karabakh settlement

    Directory of Open Access Journals (Sweden)

    K K Babayan

    2014-12-01

    Full Text Available As part of this work presents the analysis of the basic document and the legal framework of the peace settlement of the Nagorno-Karabakh conflict on the modern stage - «Madrid or Basic principles», presented to the sides of the negotiations at the OSCE ministerial conference in the Spanish capital Madrid in November 2007. The both side’s statements, international mediators and institutes form a legal background of the vector and the framework of the negotiation process. There are the fundamental differences and contradictions in the approaches of the sides of the negotiations to the «Basic principles» of the settlement in this article. The work contains a comparison of the various items and elements of the Madrid document both in relation to each other, and to the principles of international law.

  12. Development of an irradiation device for electron beam wastewater treatment

    International Nuclear Information System (INIS)

    Rela, Paulo Roberto

    2003-01-01

    When domestic or industrial effluents with synthetic compounds are disposed without an adequate treatment, they impact negatively the environment with damages to aquatic life and for the human being. Both population and use of goods and services that contribute for the hazardous waste are growing. Hazardous regulations are becoming more restrictive and technologies, which do not destroy these products, are becoming less acceptable. The electron beam radiation process is an advanced oxidation process, that produces highly reactive radicals resulting in mineralization of the contaminant. In this work was developed an irradiation system in order to optimize the interaction of electron beam delivered from the accelerator with the processed effluent. It is composed by an irradiation device where the effluent presents to the electron beam in an up flow stream and a process control unit that uses the calorimetric principle. The developed irradiation device has a different configuration from the devices used by others researchers that are working with this technology. It was studied the technical and economic feasibility, comparing with the literature the results of the irradiation device demonstrated that it has a superior performance, becoming an process for use in disinfection and degradation of hazardous organic compounds of wastewater from domestic and industrial origin, contributing as an alternative technology for Sanitary Engineering. (author)

  13. Squids: principles and basic applications in experimental physics

    International Nuclear Information System (INIS)

    Ocio, M.

    1990-01-01

    The basic principles and the description of the technical aspects of SQUIDs (Superconducting Quantum Interference Devices) are described. The applications of SQUIDs in experimental researches and low temperature physics experiments are given. The concepts of fluxoid quantization in a superconductor and Josephson tunnelling are reviewed. The principles, the operation, the noise and the different configurations of r.f. and direct current bias SQUIDs are summarized. The principal characteristics of several SQUIDs are reported

  14. Medical Devices

    NARCIS (Netherlands)

    Verkerke, Gijsbertus Jacob; Mahieu, H.F.; Geertsema, A.A.; Hermann, I.F.; van Horn, J.R.; Hummel, J. Marjan; van Loon, J.P.; Mihaylov, D.; van der Plaats, A.; Schraffordt Koops, H.; Schutte, H.K.; Veth, R.P.H.; de Vries, M.P.; Rakhorst, G.; Shi, Donglu

    2004-01-01

    The development of new medical devices is a very time-consuming and costly process. Besides the time between the initial idea and the time that manufacturing and testing of prototypes takes place, the time needed for the development of production facilities, production of test series, marketing,

  15. Electrochemical device

    Science.gov (United States)

    Grimes, Patrick G.; Einstein, Harry; Bellows, Richard J.

    1988-01-12

    A tunnel protected electrochemical device features channels fluidically communicating between manifold, tunnels and cells. The channels are designed to provide the most efficient use of auxiliary power. The channels have a greater hydraulic pressure drop and electrical resistance than the manifold. This will provide a design with the optimum auxiliary energy requirements.

  16. Assistive Devices

    Science.gov (United States)

    If you have a disability or injury, you may use a number of assistive devices. These are tools, products or types of equipment that help you perform tasks and activities. They may help you move around, see, communicate, eat, or get ...

  17. Detection device

    Science.gov (United States)

    Smith, J.E.

    1981-02-27

    The present invention is directed to a detection device comprising: (1) an entrance chamber; (2) a central chamber; and (3) an exit chamber. The central chamber includes an ionizing gas, anode, and means for connecting the anode with an external power supply and pulse counter.

  18. Building Evacuation with Mobile Devices

    OpenAIRE

    Merkel, Sabrina

    2014-01-01

    The rapidly growing world population and increasingly dense settlements demand ever-larger and more complex buildings from today's engineers. In comparison to this technological progress, a building's equipment for emergency evacuation has been hardly developed further. This work presents a concept for a building evacuation system based on mobile devices. Furthermore, various algorithms for route planning with mobile devices and for indoor localization of mobile devices are addressed.

  19. Principles of systems science

    CERN Document Server

    Mobus, George E

    2015-01-01

    This pioneering text provides a comprehensive introduction to systems structure, function, and modeling as applied in all fields of science and engineering. Systems understanding is increasingly recognized as a key to a more holistic education and greater problem solving skills, and is also reflected in the trend toward interdisciplinary approaches to research on complex phenomena. The subject of systems science, as a basis for understanding the components and drivers of phenomena at all scales, should be viewed with the same importance as a traditional liberal arts education. Principles of Systems Science contains many graphs, illustrations, side bars, examples, and problems to enhance understanding. From basic principles of organization, complexity, abstract representations, and behavior (dynamics) to deeper aspects such as the relations between information, knowledge, computation, and system control, to higher order aspects such as auto-organization, emergence and evolution, the book provides an integrated...

  20. Common principles and multiculturalism.

    Science.gov (United States)

    Zahedi, Farzaneh; Larijani, Bagher

    2009-01-01

    Judgment on rightness and wrongness of beliefs and behaviors is a main issue in bioethics. Over centuries, big philosophers and ethicists have been discussing the suitable tools to determine which act is morally sound and which one is not. Emerging the contemporary bioethics in the West has resulted in a misconception that absolute westernized principles would be appropriate tools for ethical decision making in different cultures. We will discuss this issue by introducing a clinical case. Considering various cultural beliefs around the world, though it is not logical to consider all of them ethically acceptable, we can gather on some general fundamental principles instead of going to the extremes of relativism and absolutism. Islamic teachings, according to the presented evidence in this paper, fall in with this idea.

  1. Principles of Mobile Communication

    CERN Document Server

    Stüber, Gordon L

    2012-01-01

    This mathematically rigorous overview of physical layer wireless communications is now in a third, fully revised and updated edition. Along with coverage of basic principles sufficient for novice students, the volume includes plenty of finer details that will satisfy the requirements of graduate students aiming to research the topic in depth. It also has a role as a handy reference for wireless engineers. The content stresses core principles that are applicable to a broad range of wireless standards. Beginning with a survey of the field that introduces an array of issues relevant to wireless communications and which traces the historical development of today’s accepted wireless standards, the book moves on to cover all the relevant discrete subjects, from radio propagation to error probability performance and cellular radio resource management. A valuable appendix provides a succinct and focused tutorial on probability and random processes, concepts widely used throughout the book. This new edition, revised...

  2. Principles of mathematical modeling

    CERN Document Server

    Dym, Clive

    2004-01-01

    Science and engineering students depend heavily on concepts of mathematical modeling. In an age where almost everything is done on a computer, author Clive Dym believes that students need to understand and "own" the underlying mathematics that computers are doing on their behalf. His goal for Principles of Mathematical Modeling, Second Edition, is to engage the student reader in developing a foundational understanding of the subject that will serve them well into their careers. The first half of the book begins with a clearly defined set of modeling principles, and then introduces a set of foundational tools including dimensional analysis, scaling techniques, and approximation and validation techniques. The second half demonstrates the latest applications for these tools to a broad variety of subjects, including exponential growth and decay in fields ranging from biology to economics, traffic flow, free and forced vibration of mechanical and other systems, and optimization problems in biology, structures, an...

  3. Principles of Stellar Interferometry

    CERN Document Server

    Glindemann, Andreas

    2011-01-01

    Over the last decade, stellar interferometry has developed from a specialist tool to a mainstream observing technique, attracting scientists whose research benefits from milliarcsecond angular resolution. Stellar interferometry has become part of the astronomer’s toolbox, complementing single-telescope observations by providing unique capabilities that will advance astronomical research. This carefully written book is intended to provide a solid understanding of the principles of stellar interferometry to students starting an astronomical research project in this field or to develop instruments and to astronomers using interferometry but who are not interferometrists per se. Illustrated by excellent drawings and calculated graphs the imaging process in stellar interferometers is explained starting from first principles on light propagation and diffraction wave propagation through turbulence is described in detail using Kolmogorov statistics the impact of turbulence on the imaging process is discussed both f...

  4. Principles of Fourier analysis

    CERN Document Server

    Howell, Kenneth B

    2001-01-01

    Fourier analysis is one of the most useful and widely employed sets of tools for the engineer, the scientist, and the applied mathematician. As such, students and practitioners in these disciplines need a practical and mathematically solid introduction to its principles. They need straightforward verifications of its results and formulas, and they need clear indications of the limitations of those results and formulas.Principles of Fourier Analysis furnishes all this and more. It provides a comprehensive overview of the mathematical theory of Fourier analysis, including the development of Fourier series, "classical" Fourier transforms, generalized Fourier transforms and analysis, and the discrete theory. Much of the author''s development is strikingly different from typical presentations. His approach to defining the classical Fourier transform results in a much cleaner, more coherent theory that leads naturally to a starting point for the generalized theory. He also introduces a new generalized theory based ...

  5. Principles of mobile communication

    CERN Document Server

    Stüber, Gordon L

    2017-01-01

    This mathematically rigorous overview of physical layer wireless communications is now in a 4th, fully revised and updated edition. The new edition features new content on 4G cellular systems, 5G cellular outlook, bandpass signals and systems, and polarization, among many other topics, in addition to a new chapters on channel assignment techniques. Along with coverage of fundamentals and basic principles sufficient for novice students, the volume includes finer details that satisfy the requirements of graduate students aiming to conduct in-depth research. The book begins with a survey of the field, introducing issues relevant to wireless communications. The book moves on to cover relevant discrete subjects, from radio propagation, to error probability performance, and cellular radio resource management. An appendix provides a tutorial on probability and random processes. The content stresses core principles that are applicable to a broad range of wireless standards. New examples are provided throughout the bo...

  6. Common Principles and Multiculturalism

    Science.gov (United States)

    Zahedi, Farzaneh; Larijani, Bagher

    2009-01-01

    Judgment on rightness and wrongness of beliefs and behaviors is a main issue in bioethics. Over centuries, big philosophers and ethicists have been discussing the suitable tools to determine which act is morally sound and which one is not. Emerging the contemporary bioethics in the West has resulted in a misconception that absolute westernized principles would be appropriate tools for ethical decision making in different cultures. We will discuss this issue by introducing a clinical case. Considering various cultural beliefs around the world, though it is not logical to consider all of them ethically acceptable, we can gather on some general fundamental principles instead of going to the extremes of relativism and absolutism. Islamic teachings, according to the presented evidence in this paper, fall in with this idea. PMID:23908720

  7. Cooling device in thermonuclear device

    International Nuclear Information System (INIS)

    Honda, Tsutomu.

    1988-01-01

    Purpose: To prevent loss of cooling effect over the entire torus structure directly after accidental toubles in a cooling device of a thermonuclear device. Constitution: Coolant recycling means of a cooling device comprises two systems, which are alternately connected with in-flow pipeways and exit pipeways of adjacent modules. The modules are cooled by way of the in-flow pipeways and the exist pipeways connected to the respective modules by means of the coolant recycling means corresponding to the respective modules. So long as one of the coolant recycling means is kept operative, since every one other modules of the torus structure is still kept cooled, the heat generated from the module put therebetween, for which the coolant recycling is interrupted, is removed by means of heat conduction or radiation from the module for which the cooling is kept continued. No back-up emergency cooling system is required and it can provide high economic reliability. (Kamimura, M.)

  8. Principles of (Behavioral) Economics

    OpenAIRE

    David Laibson; John A. List

    2015-01-01

    Behavioral economics has become an important and integrated component of modern economics. Behavioral economists embrace the core principles of economics—optimization and equilibrium—and seek to develop and extend those ideas to make them more empirically accurate. Behavioral models assume that economic actors try to pick the best feasible option and those actors sometimes make mistakes. Behavioral ideas should be incorporated throughout the first-year undergraduate course. Instructors should...

  9. Principles of fluid mechanics

    International Nuclear Information System (INIS)

    Kreider, J.F.

    1985-01-01

    This book is an introduction on fluid mechanics incorporating computer applications. Topics covered are as follows: brief history; what is a fluid; two classes of fluids: liquids and gases; the continuum model of a fluid; methods of analyzing fluid flows; important characteristics of fluids; fundamentals and equations of motion; fluid statics; dimensional analysis and the similarity principle; laminar internal flows; ideal flow; external laminar and channel flows; turbulent flow; compressible flow; fluid flow measurements

  10. Principles of electrical safety

    CERN Document Server

    Sutherland, Peter E

    2015-01-01

    Principles of Electrical Safety discusses current issues in electrical safety, which are accompanied by series' of practical applications that can be used by practicing professionals, graduate students, and researchers. .  Provides extensive introductions to important topics in electrical safety Comprehensive overview of inductance, resistance, and capacitance as applied to the human body Serves as a preparatory guide for today's practicing engineers

  11. Advertisement without Ethical Principles?

    OpenAIRE

    Wojciech Słomski

    2007-01-01

    The article replies to the question, whether the advertisement can exist without ethical principles or ethics should be the basis of the advertisement. One can say that the ethical opinion of the advertisement does not depend on content and the form of advertising content exclusively, but also on recipientís consciousness. The advertisement appeals to the emotions more than to the intellect, thus restricting the area of conscious and based on rational premises choice, so it is morally bad. It...

  12. General Principles Governing Liability

    International Nuclear Information System (INIS)

    Reyners, P.

    1998-01-01

    This paper contains a brief review of the basic principles which govern the special regime of liability and compensation for nuclear damage originating on nuclear installations, in particular the strict and exclusive liability of the nuclear operator, the provision of a financial security to cover this liability and the limits applicable both in amount and in time. The paper also reviews the most important international agreements currently in force which constitute the foundation of this special regime. (author)

  13. The Principle of Proportionality

    DEFF Research Database (Denmark)

    Bennedsen, Morten; Meisner Nielsen, Kasper

    2005-01-01

    Recent policy initiatives within the harmonization of European company laws have promoted a so-called "principle of proportionality" through proposals that regulate mechanisms opposing a proportional distribution of ownership and control. We scrutinize the foundation for these initiatives...... in relationship to the process of harmonization of the European capital markets.JEL classifications: G30, G32, G34 and G38Keywords: Ownership Structure, Dual Class Shares, Pyramids, EU companylaws....

  14. Common Principles and Multiculturalism

    OpenAIRE

    Zahedi, Farzaneh; Larijani, Bagher

    2009-01-01

    Judgment on rightness and wrongness of beliefs and behaviors is a main issue in bioethics. Over centuries, big philosophers and ethicists have been discussing the suitable tools to determine which act is morally sound and which one is not. Emerging the contemporary bioethics in the West has resulted in a misconception that absolute westernized principles would be appropriate tools for ethical decision making in different cultures. We will discuss this issue by introducing a clinical case. Con...

  15. The Maquet principle

    International Nuclear Information System (INIS)

    Levine, R.B.; Stassi, J.; Karasick, D.

    1985-01-01

    Anterior displacement of the tibial tubercle is a well-accepted orthopedic procedure in the treatment of certain patellofemoral disorders. The radiologic appearance of surgical procedures utilizing the Maquet principle has not been described in the radiologic literature. Familiarity with the physiologic and biochemical basis for the procedure and its postoperative appearance is necessary for appropriate roentgenographic evaluation and the radiographic recognition of complications. (orig.)

  16. Principles of lake sedimentology

    International Nuclear Information System (INIS)

    Janasson, L.

    1983-01-01

    This book presents a comprehensive outline on the basic sedimentological principles for lakes, and focuses on environmental aspects and matters related to lake management and control-on lake ecology rather than lake geology. This is a guide for those who plan, perform and evaluate lake sedimentological investigations. Contents abridged: Lake types and sediment types. Sedimentation in lakes and water dynamics. Lake bottom dynamics. Sediment dynamics and sediment age. Sediments in aquatic pollution control programmes. Subject index

  17. Principles of artificial intelligence

    CERN Document Server

    Nilsson, Nils J

    1980-01-01

    A classic introduction to artificial intelligence intended to bridge the gap between theory and practice, Principles of Artificial Intelligence describes fundamental AI ideas that underlie applications such as natural language processing, automatic programming, robotics, machine vision, automatic theorem proving, and intelligent data retrieval. Rather than focusing on the subject matter of the applications, the book is organized around general computational concepts involving the kinds of data structures used, the types of operations performed on the data structures, and the properties of th

  18. Economic uncertainty principle?

    OpenAIRE

    Alexander Harin

    2006-01-01

    The economic principle of (hidden) uncertainty is presented. New probability formulas are offered. Examples of solutions of three types of fundamental problems are reviewed.; Principe d'incertitude économique? Le principe économique d'incertitude (cachée) est présenté. De nouvelles formules de chances sont offertes. Les exemples de solutions des trois types de problèmes fondamentaux sont reconsidérés.

  19. Firewood preparation devices in 1994

    International Nuclear Information System (INIS)

    Mutikainen, A.

    1994-01-01

    A review of the market situation regarding firewood preparation devices is presented. The information was collected from the answers to a mail questionnaire. The review is assumed to include all the leading manufacturers and importers. Firewood production devices were available from 26 manufacturers. The range of models amounted to over 70. These may be divided into three categories: 1. cutting devices: the most common solution being a cross-cutting circular saw. There were only a few of these on sale as it is quite easy to include a splitting device on the same frame. 2. Splitting devices: e.g. screw splitter and hydraulically powered splitter. About 20 models are available on the markets. Cross cutting and splitting devices: these are the most popular devices. A cross-cutting circular saw with screw or hydraulic splitter is the most common type. There are about 50 models available on the markets. Cross-cutting and splitting devices are often equipped with conveyor for transferring the split wood e.g. into a trailer. Chopping devices are delivered as tractor powered devices, as electric motor powered devices or as combustion engine powered devices. Some of them are equipped with a time saving feeding device enabling the next stem to be lifted into position while the previous one is being chopped. The Finnish Work Efficiency Institute's studies show that when cross-cutting and splitting of stems into pieces of 35-50 cm in length, productivity for one operator varies in between 0.8 - 3.2 m 3 /h, depending on the device and work method used. (6 refs., 1 fig., 2 tabs.)

  20. Principled Missing Data Treatments.

    Science.gov (United States)

    Lang, Kyle M; Little, Todd D

    2018-04-01

    We review a number of issues regarding missing data treatments for intervention and prevention researchers. Many of the common missing data practices in prevention research are still, unfortunately, ill-advised (e.g., use of listwise and pairwise deletion, insufficient use of auxiliary variables). Our goal is to promote better practice in the handling of missing data. We review the current state of missing data methodology and recent missing data reporting in prevention research. We describe antiquated, ad hoc missing data treatments and discuss their limitations. We discuss two modern, principled missing data treatments: multiple imputation and full information maximum likelihood, and we offer practical tips on how to best employ these methods in prevention research. The principled missing data treatments that we discuss are couched in terms of how they improve causal and statistical inference in the prevention sciences. Our recommendations are firmly grounded in missing data theory and well-validated statistical principles for handling the missing data issues that are ubiquitous in biosocial and prevention research. We augment our broad survey of missing data analysis with references to more exhaustive resources.

  1. Research on the parallel load sharing principle of a novel self-decoupled piezoelectric six-dimensional force sensor.

    Science.gov (United States)

    Li, Ying-Jun; Yang, Cong; Wang, Gui-Cong; Zhang, Hui; Cui, Huan-Yong; Zhang, Yong-Liang

    2017-09-01

    This paper presents a novel integrated piezoelectric six-dimensional force sensor which can realize dynamic measurement of multi-dimensional space load. Firstly, the composition of the sensor, the spatial layout of force-sensitive components, and measurement principle are analyzed and designed. There is no interference of piezoelectric six-dimensional force sensor in theoretical analysis. Based on the principle of actual work and deformation compatibility coherence, this paper deduces the parallel load sharing principle of the piezoelectric six-dimensional force sensor. The main effect factors which affect the load sharing ratio are obtained. The finite element model of the piezoelectric six-dimensional force sensor is established. In order to verify the load sharing principle of the sensor, a load sharing test device of piezoelectric force sensor is designed and fabricated. The load sharing experimental platform is set up. The experimental results are in accordance with the theoretical analysis and simulation results. The experiments show that the multi-dimensional and heavy force measurement can be realized by the parallel arrangement of the load sharing ring and the force sensitive element in the novel integrated piezoelectric six-dimensional force sensor. The ideal load sharing effect of the sensor can be achieved by appropriate size parameters. This paper has an important guide for the design of the force measuring device according to the load sharing mode. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

  2. Device-Centric Monitoring for Mobile Device Management

    Directory of Open Access Journals (Sweden)

    Luke Chircop

    2016-03-01

    Full Text Available The ubiquity of computing devices has led to an increased need to ensure not only that the applications deployed on them are correct with respect to their specifications, but also that the devices are used in an appropriate manner, especially in situations where the device is provided by a party other than the actual user. Much work which has been done on runtime verification for mobile devices and operating systems is mostly application-centric, resulting in global, device-centric properties (e.g. the user may not send more than 100 messages per day across all applications being difficult or impossible to verify. In this paper we present a device-centric approach to runtime verify the device behaviour against a device policy with the different applications acting as independent components contributing to the overall behaviour of the device. We also present an implementation for Android devices, and evaluate it on a number of device-centric policies, reporting the empirical results obtained.

  3. Set Partitions and the Multiplication Principle

    Science.gov (United States)

    Lockwood, Elise; Caughman, John S., IV

    2016-01-01

    To further understand student thinking in the context of combinatorial enumeration, we examine student work on a problem involving set partitions. In this context, we note some key features of the multiplication principle that were often not attended to by students. We also share a productive way of thinking that emerged for several students who…

  4. XAFS Spectroscopy : Fundamental Principles and Data Analysis

    NARCIS (Netherlands)

    Koningsberger, D.C.; Mojet, B.L.; Dorssen, G.E. van; Ramaker, D.E.

    2000-01-01

    The physical principles of XAFS spectroscopy are given at a sufficiently basic level to enable scientists working in the field of catalysis to critically evaluate articles dealing with XAFS studies on catalytic materials. The described data-analysis methods provide the basic tools for studying the

  5. Generalized field quantization and the Pauli principle

    International Nuclear Information System (INIS)

    Govorkov, A.B.

    1990-01-01

    The work is an attempt to prove that the generalized Pauli principle (i.e. Fermi statistics) for the half-integer spin fields and the Bose statistics for the integer spin fields with allowance for the existence of internal gauge symmetries are consequences of more general assumptions of the local quantum field theory. 32 refs.; 1 tab

  6. An electrochemical sensor device for measuring blood ammonia at the point of care.

    Science.gov (United States)

    Brannelly, N T; Killard, A J

    2017-05-15

    The level of ammonia in blood is relevant in a number of medical conditions. While ammonia is a marker of dysfunction, elevated ammonia is itself a serious medical emergency and can lead to significant and permanent neurological impairment if not addressed quickly. Blood ammonia testing is typically performed in the central laboratory. While a number of point of care devices have been developed, these are based on classical enzymatic or colorimetric principles and have not been widely adopted. In this work, an electrochemical sensor device was developed for measuring blood ammonia. The device was based on the deposition of polyaniline nanoparticle films onto screen printed interdigitated electrodes using inkjet printing and their integration into a polymer microfabricated device with a polytetrafluoroethylene membrane. The device required a 52µL serum sample and measured the change in impedance of the sensor with respect to air at 1kHz, 5mV rms. The device was capable of the measurement of ammonia in serum across the physiologically relevant range of 25-200µM (r 2 =0.9984) and had a limit of detection of 12µM (n =3). The device showed no significant issues with common electrochemical interferences in blood. The device was also validated against a commercial spectrophotometric assay which resulted in excellent correlation (r =0.9699, pair (n =12) and could be stored in desiccant for at least five months. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Device for removing fur

    International Nuclear Information System (INIS)

    Hanawa, Minoru; Nakagawa, Takao; Sakuma, Toyoo; Yonemura, Eizo.

    1976-01-01

    Purpose: To effectively remove fur adhered to fuel rods and to increase working efficiency without use of a lengthy hose. Constitution: In the fur removing device of the present invention, brushes rotated by gears are provided within a casing so that fur adhered to the fuel rods are removed by the brushes and water is rotatably moved by blades housed therein to outwardly blow fur floating in water by means of a centrifugal force. Then, the fur is filtered by a filter outwardly provided. In this way, the fur may be collected within the device to avoid contamination to others. (Kamimura, M.)

  8. Device for electron beam machining

    International Nuclear Information System (INIS)

    Panzer, S.; Ardenne, T. von; Liebergeld, H.

    1984-01-01

    The invention concerns a device for electron beam machining, in particular welding. It is aimed at continuous operation of the electron irradiation device. This is achieved by combining the electron gun with a beam guiding chamber, to which vacuum chambers are connected. The working parts to be welded can be arranged in the latter

  9. THE PRINCIPLES OF LAW. PHILOSOPHICAL APPROACH

    Directory of Open Access Journals (Sweden)

    MARIUS ANDREESCU

    2013-05-01

    Full Text Available Any scientific intercession that has as objective, the understanding of the significances of the “principle of law” needs to have an interdisciplinary character, the basis for the approach being the philosophy of the law. In this study we fulfill such an analysis with the purpose to underline the multiple theoretical significances due to this concept, but also the relationship between the juridical principles and norms, respectively the normative value of the principle of the law. Thus are being materialized extensive references to the philosophical and juridical doctrine in the matter. This study is a pleading to refer to the principles, in the work for the law’s creation and applying. Starting with the difference between “given” and ‘constructed” we propose the distinction between the “metaphysical principles” outside the law, which by their contents have philosophical significances, and the “constructed principles” elaborated inside the law. We emphasize the obligation of the law maker, but also of the expert to refer to the principles in the work of legislation, interpretation and applying of the law. Arguments are brought for the updating, in certain limits, the justice – naturalistic concepts in the law.

  10. Variational principles in terms of entransy for heat transfer

    International Nuclear Information System (INIS)

    Xu, Mingtian

    2012-01-01

    A variational principle for heat conduction is formulated which results in the steady state heat conduction equation established from the Fourier law. Furthermore based on the thermodynamics in terms of entransy a more general functional is defined for incompressible fluids. We show that extremizing this functional gives rise to the state described by the Navier-Stokes-Fourier equations with vanishing substantive derivatives of the temperature and velocity field. In this sense one may conclude that this variational principle is consistent with the Navier-Stokes-Fourier equations. Therefore the variational principle developed in the present work demonstrates a great advantage over the minimum entropy production principle. -- Highlights: ► A variational principle for heat transfer of incompressible fluid is established in terms of entransy. ► For pure heat conduction the variational principle leads to the classical steady state heat conduction equation. ► For heat convection the variational principle is consistent with the Navier-Stokes-Fourier equations.

  11. Employment of mobile devices in chemistry education

    OpenAIRE

    Švehla, Martin

    2013-01-01

    This diploma thesis is focused on the use of mobile devices in chemistry education. Describes various mobile devices, including different operating systems and technology and shows huge potential that these devices bring to education. It also includes an overview of existing educational programs with a chemical theme on mobile devices. Part of this work was to create a custom supportive program Chemical helper for mobile devices, which can be used in chemistry education, laboratory and also i...

  12. Thermonuclear device

    International Nuclear Information System (INIS)

    Tezuka, Masaru.

    1993-01-01

    Protrusions and recesses are formed to a vacuum vessel and toroidal magnetic coils, and they are engaged. Since the vacuum vessel is generally supported firmly by a rack or the like by support legs, the toroidal magnetic field coils can be certainly supported against tumbling force. Then, there can be attained strong supports for the toroidal magnetic field coils, in addition to support by wedges on the side of inboard and support by share panels on the side of outboard, capable of withstanding great electromagnetic forces which may occur in large-scaled next-generation devices. That is, toroidal magnetic field coils excellent from a view point of deformation and stress can be obtained, to provide a thermonuclear device of higher reliability. (N.H.)

  13. Thermonuclear device

    International Nuclear Information System (INIS)

    Oosaki, Osamu; Masuda, Kenju.

    1980-01-01

    Purpose: To provide excellent electric properties and high reliability in a thermonuclear device by improving a current collecting board connected to a coil device. Constitution: A current collecting board element perforated with an opening for enserting a connecting terminal is sized to be inserted into a plating tank, and is surface treated in the plating tank. Only the current collecting board element preferably surface treated is picked up. A plurality of such current collecting board elements are connected and welded to form a large current collecting board. In this manner, the current collecting board having several m 2 to several ten order m 2 in area can be obtained as preferably surface treated at the connecting terminal hole. The current collecting board element can be determined in shape with the existing facility without increasing the size of a surface treating tank. (Kamimura, M.)

  14. Thermonuclear device

    International Nuclear Information System (INIS)

    Yagi, Yasuomi; Takahashi, Ken; Hashimoto, Hiroshi.

    1984-01-01

    Purpose: To improve the plasma confining performances by bringing the irregular magnetic fields nearly to zero and decreasing the absolute value of the irregular magnetic fields at every positions. Constitution: The winding direction of a plurality of coil elements, for instance, double pan cake coils of toroidal coils in a torus type or mirror type thermonuclear device are reversed to each other in their laminating direction, whereby the irregular magnetic fields due to the coil-stepped portions in each toroidal coils are brought nearly to zero. This enables to bring the average irregular magnetic fields as a whole in the thermonuclear device nearly to zero, as well as, decrease the absolute value of the irregular magnetic fields in each positions. Thus, the plasma confining performances can be improved. (Moriyama, K.)

  15. "Distinvar" device

    CERN Multimedia

    CERN PhotoLab

    1965-01-01

    The alignment of one of the accelerator magnets being checked by the AR Division survey group. A "distinvar" device, invented by the group, using calibrated invar wires stretched between the fixed survey pillar (on the left) and a fixed point on the magnet. In two days it is thus possible to measure the alignment of the 100 magnets with an accuracy better than 1/10.

  16. Latching device

    Science.gov (United States)

    Ulrich, G. W. (Inventor)

    1975-01-01

    A latching device is suited for use in establishing a substantially motionless connection between a stationary receiver and a movable latching mechanism. The latching mechanism includes a pivotally supported restraining hook continuously urged into a capturing relationship with the receiver, characterized by a spring-biased pawl having a plurality of aligned teeth. The teeth are seated in the surface of the throat of the hook and positionable into restraining engagement with a rigid restraining shoulder projected from the receiver.

  17. Academic Training: Particle Detectors - Principles and Techniques

    CERN Multimedia

    Françoise Benz

    2005-01-01

    2004-2005 ACADEMIC TRAINING PROGRAMME LECTURE SERIES FOR POSTGRADUATE STUDENTS 11, 12, 13, 14 & 15 April from 11.00 to 12.00 hrs - Main Auditorium, bldg. 500 Particle Detectors - Principles and Techniques C. JORAM, L. ROPELEWSKI, M. MOLL, C. D'AMBROSIO, T. GYS / CERN-PH The lecture series presents an overview of the physical principles and basic techniques of particle detection, applied to current and future high energy physics experiments. Illustrating examples, chosen mainly from the field of collider experiments, demonstrate the performance and limitations of the various techniques. Main topics of the series are: interaction of particles and photons with matter; particle tracking with gaseous and solid state devices, including a discussion of radiation damage and strategies for improved radiation hardness; scintillation and photon detection; electromagnetic and hadronic calorimetry; particle identification using specific energy loss dE/dx, time of flight, Cherenkov light and transition radi...

  18. Technology guide. Principles - applications - trends

    Energy Technology Data Exchange (ETDEWEB)

    Bullinger, Hans-Joerg (ed.) [Fraunhofer-Gesellschaft, Muenchen (Germany)

    2009-07-01

    Use this TECHNOLOGY GUIDE to - find descriptions of today's most essential global technologies, clearly structured and simply explained in over 100 expert contributions; - gain an understanding of the principles behind each technology, - the latest applications, the challenges ahead, and future trends; - see how and where technologies and topics are interlinked, with cross-references and further sources of information; - broaden your general knowledge of technology, presented in a comprehensive reference format that invites even the casual reader to explore the stimulating innovative ideas it contains. This guide is a useful companion for readers with a lively interest in technology. It serves as a reference work for corporate and public-sector decision makers, as well as those involved in media and government. (orig.)

  19. Intelligent instrumentation principles and applications

    CERN Document Server

    Bhuyan, Manabendra

    2011-01-01

    With the advent of microprocessors and digital-processing technologies as catalyst, classical sensors capable of simple signal conditioning operations have evolved rapidly to take on higher and more specialized functions including validation, compensation, and classification. This new category of sensor expands the scope of incorporating intelligence into instrumentation systems, yet with such rapid changes, there has developed no universal standard for design, definition, or requirement with which to unify intelligent instrumentation. Explaining the underlying design methodologies of intelligent instrumentation, Intelligent Instrumentation: Principles and Applications provides a comprehensive and authoritative resource on the scientific foundations from which to coordinate and advance the field. Employing a textbook-like language, this book translates methodologies to more than 80 numerical examples, and provides applications in 14 case studies for a complete and working understanding of the material. Beginn...

  20. Efficiency principles of consulting entrepreneurship

    OpenAIRE

    Moroz Yustina S.; Drozdov Igor N.

    2015-01-01

    The article reviews the primary goals and problems of consulting entrepreneurship. The principles defining efficiency of entrepreneurship in the field of consulting are generalized. The special attention is given to the importance of ethical principles of conducting consulting entrepreneurship activity.

  1. Algorithmic Principles of Mathematical Programming

    NARCIS (Netherlands)

    Faigle, Ulrich; Kern, Walter; Still, Georg

    2002-01-01

    Algorithmic Principles of Mathematical Programming investigates the mathematical structures and principles underlying the design of efficient algorithms for optimization problems. Recent advances in algorithmic theory have shown that the traditionally separate areas of discrete optimization, linear

  2. Unifying principles of irreversibility minimization for efficiency maximization in steady-flow chemically-reactive engines

    International Nuclear Information System (INIS)

    Ramakrishnan, Sankaran; Edwards, Christopher F.

    2014-01-01

    Systems research has led to the conception and development of various steady-flow, chemically-reactive, engine cycles for stationary power generation and propulsion. However, the question that remains unanswered is: What is the maximum-efficiency steady-flow chemically-reactive engine architecture permitted by physics? On the one hand the search for higher-efficiency cycles continues, often involving newer processes and devices (fuel cells, carbon separation, etc.); on the other hand the design parameters for existing cycles are continually optimized in response to improvements in device engineering. In this paper we establish that any variation in engine architecture—parametric change or process-sequence change—contributes to an efficiency increase via one of only two possible ways to minimize total irreversibility. These two principles help us unify our understanding from a large number of parametric analyses and cycle-optimization studies for any steady-flow chemically-reactive engine, and set a framework to systematically identify maximum-efficiency engine architectures. - Highlights: • A unified thermodynamic model to study chemically-reactive engine architectures is developed. • All parametric analyses of efficiency are unified by two irreversibility-minimization principles. • Variations in internal energy transfers yield a net work increase that is greater than engine irreversibility reduced. • Variations in external energy transfers yield a net work increase that is lesser than engine irreversibility reduced

  3. QoE-Aware Device-to-Device Multimedia Communications

    Directory of Open Access Journals (Sweden)

    Liang ZHOU

    2015-08-01

    Full Text Available Multimedia services over mobile device-to-device (D2D networks has recently received considerable attention. In this scenario, each device is equipped with a cellular communication interface, as well as a D2D interface over a shared medium. In this work, we study the performance properties of the mobile D2D communications in the framework of user satisfaction, and develop a fully distributed QoE-aware multimedia communication scheme (QAMCS. Specifically, we translate the opportunistic multimedia communications issue into a stochastic optimization problem, which opens up a new degree of performance to exploit. Moreover, QAMCS is designed for a heterogeneous and dynamic environment, in which user demand, device mobility, and transmission fashion may vary across different devices and applications. Importantly, QAMCS is able to maximize the user satisfaction and only needs each device to implement its own scheme individually in the absence of a central controller.

  4. Electrical principles and technology for engineering

    CERN Document Server

    Bird, John

    1995-01-01

    The aim of this book is to introduce students to the basic electrical and electronic principles needed by technicians in fields such as electrical engineering, electronics and telecommunications. The emphasis is on the practical aspects of the subject, and the author has followed his usual successful formula, incorporating many worked examples and problems (answers supplied) into the learning process.Electrical Principles and Technology for Engineering is John Bird's core text for Further Education courses at BTEC levels N11 and N111 and Advanced GNVQ. It is also designed to provide a comprehe

  5. Machinery condition monitoring principles and practices

    CERN Document Server

    Mohanty, Amiya Ranjan

    2015-01-01

    Find the Fault in the MachinesDrawing on the author's more than two decades of experience with machinery condition monitoring and consulting for industries in India and abroad, Machinery Condition Monitoring: Principles and Practices introduces the practicing engineer to the techniques used to effectively detect and diagnose faults in machines. Providing the working principle behind the instruments, the important elements of machines as well as the technique to understand their conditions, this text presents every available method of machine fault detection occurring in machines in general, an

  6. Hamilton principle for the dual electrodynamics

    International Nuclear Information System (INIS)

    Souza Silva, Saulo Carneiro de

    1995-01-01

    The present work discusses the classical electromagnetic theory in the presence of magnetic monopoles. We review the connection between such objects and the long standing problem of charge quantization and the main theoretical difficulties in formulating the classical dual electromagnetic theory in terms of an action principle. We show that a deeper understanding of the source of such difficulties leads naturally to the construction of a variational principle for a non-local Lagrangian from which all the (local) dynamical equations for electric, magnetic charges and fields can be obtained. (author)

  7. The Playtime Principle

    DEFF Research Database (Denmark)

    Sifa, Rafet; Bauckhage, Christian; Drachen, Anders

    2014-01-01

    be derived from this large-scale analysis, notably that playtime as a function of time, across the thousands of games in the dataset, and irrespective of local differences in the playtime frequency distribution, can be modeled using the same model: the Wei bull distribution. This suggests...... that there are fundamental properties governing player engagement as it evolves over time, which we here refer to as the Playtime Principle. Additionally, the analysis shows that there are distinct clusters, or archetypes, in the playtime frequency distributions of the investigated games. These archetypal groups correspond...

  8. Complex Correspondence Principle

    International Nuclear Information System (INIS)

    Bender, Carl M.; Meisinger, Peter N.; Hook, Daniel W.; Wang Qinghai

    2010-01-01

    Quantum mechanics and classical mechanics are distinctly different theories, but the correspondence principle states that quantum particles behave classically in the limit of high quantum number. In recent years much research has been done on extending both quantum and classical mechanics into the complex domain. These complex extensions continue to exhibit a correspondence, and this correspondence becomes more pronounced in the complex domain. The association between complex quantum mechanics and complex classical mechanics is subtle and demonstrating this relationship requires the use of asymptotics beyond all orders.

  9. Principles of chemical kinetics

    CERN Document Server

    House, James E

    2007-01-01

    James House's revised Principles of Chemical Kinetics provides a clear and logical description of chemical kinetics in a manner unlike any other book of its kind. Clearly written with detailed derivations, the text allows students to move rapidly from theoretical concepts of rates of reaction to concrete applications. Unlike other texts, House presents a balanced treatment of kinetic reactions in gas, solution, and solid states. The entire text has been revised and includes many new sections and an additional chapter on applications of kinetics. The topics covered include quantitative rela

  10. RFID design principles

    CERN Document Server

    Lehpamer, Harvey

    2012-01-01

    This revised edition of the Artech House bestseller, RFID Design Principles, serves as an up-to-date and comprehensive introduction to the subject. The second edition features numerous updates and brand new and expanded material on emerging topics such as the medical applications of RFID and new ethical challenges in the field. This practical book offers you a detailed understanding of RFID design essentials, key applications, and important management issues. The book explores the role of RFID technology in supply chain management, intelligent building design, transportation systems, military

  11. Principles of meteoritics

    CERN Document Server

    Krinov, E L

    1960-01-01

    Principles of Meteoritics examines the significance of meteorites in relation to cosmogony and to the origin of the planetary system. The book discusses the science of meteoritics and the sources of meteorites. Scientists study the morphology of meteorites to determine their motion in the atmosphere. The scope of such study includes all forms of meteorites, the circumstances of their fall to earth, their motion in the atmosphere, and their orbits in space. Meteoric bodies vary in sizes; in calculating their motion in interplanetary space, astronomers apply the laws of Kepler. In the region of

  12. Principles of Uncertainty

    CERN Document Server

    Kadane, Joseph B

    2011-01-01

    An intuitive and mathematical introduction to subjective probability and Bayesian statistics. An accessible, comprehensive guide to the theory of Bayesian statistics, Principles of Uncertainty presents the subjective Bayesian approach, which has played a pivotal role in game theory, economics, and the recent boom in Markov Chain Monte Carlo methods. Both rigorous and friendly, the book contains: Introductory chapters examining each new concept or assumption Just-in-time mathematics -- the presentation of ideas just before they are applied Summary and exercises at the end of each chapter Discus

  13. On Weak Markov's Principle

    DEFF Research Database (Denmark)

    Kohlenbach, Ulrich Wilhelm

    2002-01-01

    We show that the so-called weak Markov's principle (WMP) which states that every pseudo-positive real number is positive is underivable in E-HA + AC. Since allows one to formalize (atl eastl arge parts of) Bishop's constructive mathematics, this makes it unlikely that WMP can be proved within...... the framework of Bishop-style mathematics (which has been open for about 20 years). The underivability even holds if the ine.ective schema of full comprehension (in all types) for negated formulas (in particular for -free formulas) is added, which allows one to derive the law of excluded middle...

  14. Principles of quantum chemistry

    CERN Document Server

    George, David V

    2013-01-01

    Principles of Quantum Chemistry focuses on the application of quantum mechanics in physical models and experiments of chemical systems.This book describes chemical bonding and its two specific problems - bonding in complexes and in conjugated organic molecules. The very basic theory of spectroscopy is also considered. Other topics include the early development of quantum theory; particle-in-a-box; general formulation of the theory of quantum mechanics; and treatment of angular momentum in quantum mechanics. The examples of solutions of Schroedinger equations; approximation methods in quantum c

  15. Principles of thermodynamics

    CERN Document Server

    Kaufman, Myron

    2002-01-01

    Ideal for one- or two-semester courses that assume elementary knowledge of calculus, This text presents the fundamental concepts of thermodynamics and applies these to problems dealing with properties of materials, phase transformations, chemical reactions, solutions and surfaces. The author utilizes principles of statistical mechanics to illustrate key concepts from a microscopic perspective, as well as develop equations of kinetic theory. The book provides end-of-chapter question and problem sets, some using Mathcad™ and Mathematica™; a useful glossary containing important symbols, definitions, and units; and appendices covering multivariable calculus and valuable numerical methods.

  16. Principles of fluorescence techniques

    CERN Document Server

    2016-01-01

    Fluorescence techniques are being used and applied increasingly in academics and industry. The Principles of Fluorescence Techniques course will outline the basic concepts of fluorescence techniques and the successful utilization of the currently available commercial instrumentation. The course is designed for students who utilize fluorescence techniques and instrumentation and for researchers and industrial scientists who wish to deepen their knowledge of fluorescence applications. Key scientists in the field will deliver theoretical lectures. The lectures will be complemented by the direct utilization of steady-state and lifetime fluorescence instrumentation and confocal microscopy for FLIM and FRET applications provided by leading companies.

  17. Development of Smartphone based Optical Device

    Science.gov (United States)

    Jung, Youngkee

    Due to the economy of scale, smartphones are becoming more affordable while their computing powers are increasing dramatically every year. Here we propose a ubiquitous and portable instrument for analyte quantitation by utilizing the characteristics of typical smartphone imaging system and specific design of transducers for different applications. Three testbeds included in this work are: quantitative colorimetric analysis, ultra-low radiant flux detection, and portable spectrometer. As a proof-of-principle for each device, 3-D printed cradle and theoretical simulation with MATLAB have been implemented. First example utilizes the native CMOS camera with their respective RGB channel data and perform an analyte quantitation for typical lateral flow devices (LFD). Histogram analysis method has been employed to detect the analyte concentration and calibration results show good correlation between perceived color change and analyte concentration. The second example shows the possibility of using a conventional CMOS camera for pico Watt level photon flux detection. Since most of consumer grade CMOS cameras cannot detect this level of light intensity and their dark current are relatively higher, a new algorithm called NREA (Noise Reduction by Ensemble Averaging) algorithm was developed to effectively reduce the noise level and increase the SNR (signal to noise ratio). This technique is effective for bioanalytical assays that has lower flux intensity such as fluorescence and luminescence. As a proof-of-principle, we tested the device with Pseudomonas fluorescens M3A and achieved a limit of detection of high 10? CFU/ml. In addition to basic schematic of detection model, another experiment with a silicon photomultiplier (SiPM) has been studied for more sensitive light detectability. Based on both the laser experiment and tw bioluminescent experiments, named Pseudomonas fluorescens M3A and NanoLuc, we found that the miniSM based device has a superior ability than the

  18. The minimal work cost of information processing

    Science.gov (United States)

    Faist, Philippe; Dupuis, Frédéric; Oppenheim, Jonathan; Renner, Renato

    2015-07-01

    Irreversible information processing cannot be carried out without some inevitable thermodynamical work cost. This fundamental restriction, known as Landauer's principle, is increasingly relevant today, as the energy dissipation of computing devices impedes the development of their performance. Here we determine the minimal work required to carry out any logical process, for instance a computation. It is given by the entropy of the discarded information conditional to the output of the computation. Our formula takes precisely into account the statistically fluctuating work requirement of the logical process. It enables the explicit calculation of practical scenarios, such as computational circuits or quantum measurements. On the conceptual level, our result gives a precise and operational connection between thermodynamic and information entropy, and explains the emergence of the entropy state function in macroscopic thermodynamics.

  19. Stud manipulating device

    International Nuclear Information System (INIS)

    Bunyan, T.W.

    1980-01-01

    A device for inserting and removing studs from bores in a workpiece, for example a nuclear reactor vessel, comprises manipulating devices for operating on individual studs, each capable of tensioning a stud slackening a working nut on the stud, and subsequently removing the stud from the bore. A ring has dogs which can engage working nut recesses to interlock with the nut against relative rotation. Motors coupled to the ring rotate the working nut. A top nut is coupled to the motors to rotate the nut and screw it onto the stud. The top nut with other device parts can be raised and lowered on a tube by a hydraulic actuator. A hydraulic load cell between the top nut and a stool on the workpiece is pressurised to tension the stud by means of the top nut and thus facilitate rotation of the working nut when tightening or slackening. A dog clutch mechanism engages a stud end fitting against relative axial and rotational movement. The mechanism is raised and lowered on a guide member by an actuator. The mechanism has a tubular member and the drive coupling for the motors to the top nut includes a tubular member. Tubular members carry teeth which are engaged when the top nut is raised and the clutch mechanism is lowered, to provide a coupling between the motors and the mechanism for rotating the stud. (U.K.)

  20. Physical models of semiconductor quantum devices

    CERN Document Server

    Fu, Ying

    2013-01-01

    The science and technology relating to nanostructures continues to receive significant attention for its applications to various fields including microelectronics, nanophotonics, and biotechnology. This book describes the basic quantum mechanical principles underlining this fast developing field. From the fundamental principles of quantum mechanics to nanomaterial properties, from device physics to research and development of new systems, this title is aimed at undergraduates, graduates, postgraduates, and researchers.