Rancang Bangun Platform Sistem SFN TV Digital DVB-T2

Directory of Open Access Journals (Sweden)

Rakhmat Oktariza

2015-12-01

Full Text Available Menyambut implementasi penuh standar penyiaran TV digital DVB-T2 di Indonesia, pemahaman konsep dan realisasi terkait skema alokasi frekuensi dan susunan pemancar-penerima amat diperlukan untuk dapat melakukan perencanaan jaringan yang matang. Adanya suatu platform untuk implementasi, pengukuran dan analisis kinerja sistem DVB-T2 akan sangat membantu hal tersebut. Tugas Akhir ini bertujuan merancang platform sistem Single Frequency Network (SFN untuk implementasi, pengukuran dan analisis pada aplikasi TV digital berstandar DVB-T2. Rancangan platform untuk pengukuran terdiri atas sebuah PC berisi card DekTec DTA-2131 dan antena UHF sebagai unit penerima, sedangkan dua buah PC berisi card DekTec DTA-2111 sebagai unit pemancar dan sebuah RF channel simulator ditambahkan untuk memungkinkan implementasi dan pengujian SFN secara mandiri dalam skala laboratorium. Pengukuran lapangan melalui drive test dilakukan dengan unit penerima sebagai evaluasi terhadap jaringan penyiaran TV digital di wilayah Gerbang Kertasusila. Hasil yang diperoleh kemudian digunakan dalam simulasi untuk menentukan rekomendasi skenario pengimplementasian SFN di wilayah tersebut, terutama dalam kaitannya dengan faktor Power Imbalance (PI antara dua atau lebih pemancar. Platform yang dirancang sudah mampu diaplikasikan untuk pengukuran dan evaluasi jaringan penyiaran existing. Sementara hasil pengukuran dari 8 test point memberikan rata-rata level RF sebesar -67,70 dBm dan CNR sebesar 20,40 dB untuk wilayah Gerbang Kertasusila. Skenario pasangan pemancar yang direkomendasikan dari hasil simulasi adalah Tx1-2 untuk SFN-SISO dan Tx2-3 untuk SFN-MISO.

STRUKTUR MORFOLOGI, KOMPOSISI KIMIA DAN RESISTANSI LAPISAN TIO2-CU SEBAGAI LAPISAN AKTIF PADA SEL SURYA FOTOELEKTROKIMIA

Directory of Open Access Journals (Sweden)

Rita Prasetyowati

2013-11-01

Full Text Available Peningkatan efisiensi sel surya titania terus dikembangkan. Salah satunya adalah memodifikasi titania yang berfungsi sebagai lapisan aktif. Lapisan titania dapat disisipi dengan logam Cu. Penyisipan logam Cu pada TiO2 dilakukan melalui pembuatan nanokomposit TiO2-Cu dengan metode sol-gel. Lapisan TiO2-Cu yang terbentuk dikarakterisasi dengan SEM (Scanning Electron Microscopy untuk mengetahui struktur morfologi permukaan, EDX (Energy dispersive X-ray spectroscopy untuk mengetahui komposisi bahan. Sedangkan resistansi lapisan diukur menggunakan Jembatan Wheatstone. Berdasarkan hasil SEM dapat ditunjukkan bahwa struktur morfologi permukaan lapisan TiO2-Cu tidak berbeda secara signifikan dengan lapisan TiO2, yaitu cukup homogen dan memiliki ukuran butir (grain yang hampir sama. Tetapi dari hasil EDX diperoleh bahwa lapisan TiO2-Cu yaitu lapisan TiO2 yang disisipi logam tembaga mengandung  unsur Ti sebanyak 59,8%, unsur O sebanyak 40,02% dan unsur Cu sebanyak 0,19%. Sedangkan lapisan TiO2 saja mengandung unsur Ti sebanyak 54,25% dan unsur O sebanyak 45,75%. Penyisipan logam tembaga pada lapisan titania dapat menurunkan resistansi listrik lapisan. Nilai resistansi lapisan TiO2 adalah 7,714 kilo ohm. Sedangkan nilai resistansi lapisan TiO2-Cu adalah 6,624 kilo ohm.

4. Sınıf Öğrencilerinin Üstbilişsel Okuma Stratejilerini Kullanma Durumları ve Bu Stratejilerle Okuduğunu Anlama Arasındaki İlişki 4th Grade Students' Using Metacognitive Reading Strategies Conditions and between the Relationship Reading Comprehension and Using These Strategies

Directory of Open Access Journals (Sweden)

Mustafa BAŞARAN

2013-09-01

Full Text Available Aim of this study is to determine that 4th grade students' usingmetacognitive reading strategies conditions and the relationshipbetween reading comprehension rates and using these strategies ratesin this grade. The Research method of this study is relational scan thatis a descriptive method. The universe of the study is 4th grade students,who attend state elementary schools in the center of Kütahya provincein 2012-2013 academic season. The sample of study is 89 4th gradestudents, who were selected from this universe. The study consists offour parts. In the first chapter, Metacognition and metacognitive readingstrategies are discussed. The method of study is explained in the secondchapter. The findings and the comments are available in the thirdsection. In the last chapter, there are the results of the study and thediscussing of results. According to the results of study, 4th gradestudents’ use often before reading, during reading and after readingmetacognitive reading strategies but students use fewer strategies forremembering. The gender of students has no significant effect on usingmetacognitive reading strategies However, the branch has significanteffect on the rate of use metacognitive reading strategies. According tothe results of the research there is not a significant relationshipbetween using metacognitive reading strategies rates andunderstanding. Bu araştırmada 4. sınıf öğrencilerinin üstbilişsel okuma stratejilerini kullanma durumlarının ve bu sınıf seviyesindeki öğrencilerin üstbilişsel okuma stratejilerini kullanma oranı ile okuduğunu anlamaları arasındaki ilişkinin tespiti amaçlanmıştır. Araştırmanın yöntemi, betimsel yöntemlerden, ilişkisel taramadır. Araştırmanın çalışma evreni 2012-2013 eğitim öğretim yılında Kütahya il merkezindeki ilkokullarda öğrenimine devam eden 4. sınıf öğrencileridir. Araştırmanın örneklemini ise bu evrenden rastgele seçilen bir devlet okulunun �

Perbaikan Metode Penghitungan Debit Sungai Menggunakan Cubic Spline Interpolation

Directory of Open Access Journals (Sweden)

Budi I. Setiawan

2007-09-01

Full Text Available Makalah ini menyajikan perbaikan metode pengukuran debit sungai menggunakan fungsi cubic spline interpolation. Fungi ini digunakan untuk menggambarkan profil sungai secara kontinyu yang terbentuk atas hasil pengukuran jarak dan kedalaman sungai. Dengan metoda baru ini, luas dan perimeter sungai lebih mudah, cepat dan tepat dihitung. Demikian pula, fungsi kebalikannnya (inverse function tersedia menggunakan metode. Newton-Raphson sehingga memudahkan dalam perhitungan luas dan perimeter bila tinggi air sungai diketahui. Metode baru ini dapat langsung menghitung debit sungaimenggunakan formula Manning, dan menghasilkan kurva debit (rating curve. Dalam makalah ini dikemukaan satu canton pengukuran debit sungai Rudeng Aceh. Sungai ini mempunyai lebar sekitar 120 m dan kedalaman 7 m, dan pada saat pengukuran mempunyai debit 41 .3 m3/s, serta kurva debitnya mengikuti formula: Q= 0.1649 x H 2.884 , dimana Q debit (m3/s dan H tinggi air dari dasar sungai (m.

Implementasi Analog Front End Pada Sensor Kapasitif Untuk Pengaturan Kelembaban Menggunakan Mikrokontroller STM32

Directory of Open Access Journals (Sweden)

Rendy Setiawan

2017-01-01

Full Text Available Sensor kapasitif merupakan jenis sensor yang mengubah stimulus fisik menjadi perubahan kapasitansi. Pada sensor kapasitif, adanya stray capacitance atau kapasitansi parasitik pada sensor dapat menyebabkan kesalahan dalam pengukuran. Dalam aplikasi pengaturan kelembaban, dibutuhkan sistem pengukuran kelembaban dengan kesalahan minimum untuk mendapatkan nilai setting point dengan galat minimum. Maka diperlukan implementasi analog front end yang dapat meminimalisir kesalahan akibat stray capacitance pada sensor kapasitif untuk pengukuran kelembaban relatif. Pada sistem pengukuran sensor kapasitif ini, sensor dieksitasi dengan sinyal AC yang dihasilkan oleh generator sinyal pada frekuensi 10 KHz, kemudian diimplementasikan analog front end untuk mengondisikan sinyal dari sensor. Keluaran dari analog front end dikonversi menjadi sinyal DC menggunakan demodulator sinkron dan filter low pass lalu dikonversi menjadi data digital menggunakan ADC di mikrokontroller STM32. Hasil pengukuran yang didapatkan dengan implementasi analog front end kemudian kemudian gunakan untuk mengatur kelembaban pada sebuah plant growth chamber. Berdasarkan hasil dari pengujian, rangkaian analog front end dapat mengompensasi stray capacitance dengan kesalahan pembacaan nilai kapasitansi maksimal sebesar 4.2% pada kondisi stray capacitance sebesar 236,6pF, 174,3pF dan 115,7pF. Implementasi analog front end pada pengaturan kelembaban menghasilkan galat pada setting point maksimal sebesar 8.8% untuk nilai RH 75% dan 33%.

Overexpression of pig selenoprotein S blocks OTA-induced promotion of PCV2 replication by inhibiting oxidative stress and p38 phosphorylation in PK15 cells

Science.gov (United States)

Gan, Fang; Hu, Zhihua; Huang, Yu; Xue, Hongxia; Huang, Da; Qian, Gang; Hu, Junfa; Chen, Xingxiang; Wang, Tian; Huang, Kehe

2016-01-01

Porcine circovirus type 2 (PCV2) is the primary cause of porcine circovirus disease, and ochratoxin A (OTA)-induced oxidative stress promotes PCV2 replication. In humans, selenoprotein S (SelS) has antioxidant ability, but it is unclear whether SelS affects viral infection. Here, we stably transfected PK15 cells with pig pCDNA3.1-SelS to overexpress SelS. Selenium (Se) at 2 or 4 μM and SelS overexpression blocked the OTA-induced increases of PCV2 DNA copy number and infected cell numbers. SelS overexpression also increased glutathione (GSH), NF-E2-related factor 2 (Nrf2) mRNA, and γ-glutamyl-cysteine synthetase mRNA levels; decreased reactive oxygen species (ROS) levels; and inhibited p38 phosphorylation in PCV2-infected PK15 cells, regardless of OTA treatment. Buthionine sulfoximine reversed all of the above SelS-induced changes. siRNA-mediated SelS knockdown decreased Nrf2 mRNA and GSH levels, increased ROS levels, and promoted PCV2 replication in OTA-treated PK15 cells. These data indicate that pig SelS blocks OTA-induced promotion of PCV2 replication by inhibiting the oxidative stress and p38 phosphorylation in PK15 cells. PMID:26943035

PERANCANGAN SISTEM PENILAIAN KINERJA DI STT ADISUTJIPTO SEBAGAI PENDUKUNG SISTEM PENJAMINAN MUTU

Directory of Open Access Journals (Sweden)

Yasrin Zabidi

2007-04-01

Full Text Available Sekolah Tinggi Teknologi Adisutjipto (STTA sebagai sebuah perguruan tinggi yang baru terbentuk sangatlah perlu untuk membentuk Sistem Pengukuran Kinerja (SPK demi terciptanya visi dan misi. SPK yang baik haruslah terintegrasi untuk semua unit dan aktivitas di perguruan tinggi. Indikator kinerja yang terbentuk tidak hanya berupa indikator kinerja finansial (keuangan tetapi juga indikator kinerja nonfinansial. Oleh karena itu peneliti mencoba merancang sistem pengukuran kinerja dengan melibatkan indikator kinerja finansial dan nonfinansial. Prores perancangan SPK menggunakan model Balanced Scorecard , yaitu keseimbangan antara finansial dan nonfinansial dengan didasarkan pada langkah-langkah (framework yaitu penetapan arsitek pengukuran, penentuan tujuan strategis (strategic objectives dari masing-masing perspektif (finansial, pelanggan, proses bisnis internal, belajar dan tumbuh, penentuan Key Performance Indicators (KPI dan penentuan target. Indikator-indikator kinerja (key performance indicators yang terbentuk dalam penelitian ini ada 45 indikator kinerja. Untuk melakukan penilaian kinerja adalah menggunakan lembar kerja pengukuran kinerja yang dirancang sedemikian rupa sehingga dapat memberikan gambaran mengenai kinerja.

Ethnoarchéologie du salar d'Uyuni: sel et cultures régionales inter salar

Directory of Open Access Journals (Sweden)

1985-01-01

Full Text Available Le sel a toujours été l'une des denrées fondamentalement indispensables à la vie quotidienne des hommes. Abondant dans les hauts plateaux des Andes centrales, il constitue l'une des principales richesses des populations locales. Transporté par caravanes de lamas vers d'autres écozones où il est troqué, littoral pacifique, moyennes et basses vallées orientales, il permet à chaque communauté d'acquérir les matières premières complémentaires nécessaires à sa propre subsistance: maïs, piment, coca ou algues... En Bolivie, les grands salars d'Uyuni et de Coipasa sont les principaux centres d'approvisionnement en sel. Leur exploitation à l'échelle régionale semblerait remonter bien avant la colonisation espagnole? La zone 'inter salar,' comprise entre ces deux grandes salines proches de la frontière chilienne, est la mieux localisée pour essayer de déterminer l'exploitation dont elles ont pu faire l'objet par les diverses cultures régionales anciennes ou plus contemporaines. Cette interrogation est à la base du projet d'ethnoarchéologie commencé sur cette région. Cet article présente les premiers résultats de la prospection archéologique menée du 15 novembre au 15 décembre 1983 dans le cadre de ce programme. Il révèle l'existence de nombreux sites fortifiés ou d'inhumations pré-inca correspondant, dans leur ensemble, à des cultures ou grandes chefferies régionales ou 'señoríos' post-Tiwanaku, pouvant être liés au salar et au commerce du sel? Il met l'accent sur les problèmes soulevés par cette étude, les possibilités d'interprétation que nous pouvons avancer et les orientations souhaitées pour compléter ce projet. Siempre la sal ha sido uno de los productos fundamentalmente necesarios para la vida cotidiana del ser humano. Muy abundante en el altiplano de los Andes centrales, la sal constituye, para las poblaciones locales, una de sus riquezas más valiosas. Cargada y trasladada por caravanas de

Disain Sistem Pemantauan Lingkungan Untuk Evaluasi Lepasan Radionuklida dari Subsistem pada Kecelakaan Reaktor Daya PWR

Directory of Open Access Journals (Sweden)

Sri Kuntjoro

2013-03-01

Full Text Available PLTN. (Pembangkit Listrik Tenaga Nuklir sebagai sumber energi baru dipilih sebagai alternatif, karena memiliki berbagai kelebihan yaitu ramah lingkungan, pasokan bahan bakar yang tidak bergantung musim, serta harganya yang dapat bersaing dengan pembangkit listrik yang lain. Namun demikian, adanya keraguan sebagian masyarakat tentang keselamatan radiasi PLTN, maka pemerintah harus bisa meyakinkan tentang operasi PLTN yang aman dan selamat. Penelitian tentang disain sistem pemantauan lingkungan untuk evaluasi lepasan radionuklida dari subsistem reaktor dan lingkungan akibat terjadinya kecelakaan pada reaktor daya telah dilakukan. Penelitian dilakukan dengan melakukan perhitungan sebaran radionuklida ke subsistem dan lingkungan serta membuat sistim monitoring radiasi di lingkungan. Sistem monitoring lingkungan terdiri dari system pencacah radiasi, sistem peringatan dini, sistem pengukuran meteorologi, sistem GPS dan system GIS. Sistem pencacah radiasi digunakan untuk mencatat data radiasi, sistem pengukuran meteorologi digunakan untuk mencatat data arah dan kecepatan angin, sedangkan sistem GPS digunakan untuk menentukan data posisi pengukuran. Data tersebut kemudian dikirimkan ke system akuisisi data untuk ditransmisikan ke pusat kendali. Pengumpulan dan pengiriman data dilakukan melalui SMS menggunakan perangkat modem yang ditempatkan di ruang kendali. Ruang kendali menerima data dari berbagai tempat pengukuran. Dalam hal ini ruang kendali memiliki fungsi sebagai SMS gateway. Sistem ini dapat memvisualisasi untuk lokasi pengukuran yang berbeda. Selanjutnya, data posisi dan data radiasi diintegrasikan dengan peta digital. Integrasi sistem tersebut kemudian divisualisasikan dalam personal komputer. Untuk posisi pengukuran terlihat langsung di peta dan untuk data radiasi ditampilkan di monitor dengan tanda lingkaran merah atau hijau yang digunakan sebagai pemonitor batas aman radiasi. Bila tanda lingkaran berwarna merah maka akan menyalakan alarm di

Uyarlanmış Bilişsel Strateji Öğretiminin Öykü Yazmada Uygulanması: Zihinsel Yetersizliği Olan Bir Öğrenci İle Vaka Çalışması

Directory of Open Access Journals (Sweden)

E. Rüya Özmen

2015-08-01

Full Text Available Bu vaka çalışmasında, Uyarlanmış Bilişsel Strateji Öğretimi’nin (UBSÖ, hafif düzeyde zihinsel yetersizliği olan bir öğrencinin öykü yazma becerisine ve yazma süreci işlemsel bilgisine etkisi incelenmiştir. Öğrenci 6. sınıf özel eğitim sınıfına devam etmektedir. UBSÖ, Yazmada Bilişsel Strateji Öğretimi ve Kendini Düzenleme Gelişimi Yaklaşımının öğretimsel özelliklerine göre desenlenmiştir. Çalışmada öğrencinin öyküleri; öykü ögeleri, öykü kalitesi, öykü uzunluğu bakımından değerlendirilmiştir. Ayrıca öğrencinin yazmaya harcadığı süre hesaplanmıştır. Öğrencinin yazma süreci işlemsel bilgisini belirlemek için üstbilişsel görüşme yapılmıştır. Öğretim sonunda öğrenci çalışmanın tüm değişkenleri bakımından ilerleme göstermiştir. Çalışmada sonuçlar tartışılmış, uygulama ve araştırma önerilerine yer verilmiştir. In this case study, the effects of Modified Cognitive Strategy Instruction (MCSI on the story writing skills and procedural knowledge of writing process of a student with mild intellectual disability was investigated. The student is attending the 6th grade special education class. MCSI was designed in accordance with the instructional properties of Cognitive Strategy Instruction in Writing and Self-Regulation Strategy Development. In this study, the stories of student were assessed respect to the story elements, quality and length. Furthermore, the time spent by the student for writing was also calculated. In order to determine student’s procedural knowledge of writing process, metacognitive interview was administered. In consequence of instruction, the student showed improvement in terms of all the study variables. In the study, the results were discussed and suggestions for further implementation and research were provided.

Information Management System for Electronic Voting In Support of the Schieffelin Award for Excellence in Teaching

Science.gov (United States)

2001-09-01

oldz3 decimal(5,3), @sel1 decimal(5,3), @sel2 decimal(5,3), @sel3 decimal(5,3), @ sel4 decimal(5,3), @sel5 decimal(5,3), @sel6 decimal(5,3...tnpSchieffelinHistory WHERE EmployeeID = @s4 and CalendarYear = @year SET @ sel4 = @z4formula + @oldsel4 UPDATE tnpSchieffelinHistory SET...SelectedOnBallotScore = @ sel4 WHERE EmployeeID = @s4 and CalendarYear = @year 345 END

PROTEKSI VAKSIN MONOVALEN DAN KOKTAIL SEL UTUH TERHADAP KO-INFEKSI Mycobacterium fortuitum DAN Aeromonas hydrophila PADA IKAN GURAME, Osphronemus gouramy Uni

Directory of Open Access Journals (Sweden)

Uni Purwaningsih

2014-08-01

serangan agen patogen. Pemberian vaksin diharapkan dapat merangsang respons imun spesifik dan non spesifik pada ikan. Keberhasilan vaksinasi dipengaruhi oleh konsentrasi antigen, reaksi silang dan kompetisi di antara antigen yang berbeda. Penelitian ini bertujuan untuk menganalisis level proteksi vaksin monovalen dan koktail sel utuh terhadap ko-infeksi M. fortuitum dan A. hydrophila pada ikan gurame. Respons imun perlakuan vaksin monovalen maupun koktail pada gurame pasca ko-infeksi menunjukkan nilai parameter-parameter yaitu: hematokrit, hemoglobin, indeks fagositik, persentase fagositik, titer antibodi, uji respiratory burst (NBT, aktivitas komplemen, dan diferensial leukosit yang berbeda nyata (P<0,05 dibanding kontrol. Vaksin monovalen A. hydrophila menunjukkan nilai RPS sebesar 92,3% dan monovalen M. fortuitum sebesar 78,6% setelah ditantang dengan infeksi tunggal bakteri homolog namun menunjukkan proteksi yang rendah terhadap ko-infeksi. Vaksin koktail 50Mf :50Ah memberikan proteksi yang lebih baik dari vaksin monovalen pasca uji tantang dengan ko-infeksi bakteri M. fortuitum dan A. hydrophila.

Kavunda ebeveyn hat ile melezlerinin bazı tohum ve tohum çıkışı özelliklerinin belirlenmesi

OpenAIRE

TUR, Ayşegül; SEYMEN, Musa; TÜRKMEN, Önder

2018-01-01

Bu çalışma, 2015-2016 yıllarında yürütülmüş ve bitkisel materyal olarak, 13 genotip (SÇ-1: Sel-1-1. SÇ-2: Sel-1-2. SÇ-3: Sel-2. SÇ-4: Sel-3. SÇ-5: Sel-4. SÇ-6: Sel-6-1. SÇ-7: Sel-6-2. SÇ-8: Sel-7. SÇ-9: Sel-8. SÇ-10: Sel-9. SÇ-11: Sel-10. SÇ-12: Sel-11. SÇ-13: Pop. Diyarbakır). 4 ebeveyn hat (EB-1: saf hat-7. EB-2: saf hat-A4. EB-3: saf hat-G22. EB-4: saf hat-136) ve 9 melez (M-1: safhat 7xsafhat-136. M-2: safhat-7xsafhat-A4. M-3: safhat-7xsafhat-G22. M-4: safhat-G22xsafhat-136. M-5: safhat-G...

OPTIMASI KLASIFIKASI SEL TUNGGAL PAP SMEAR MENGGUNAKAN CORRELATION BASED FEATURES SELECTION (CFS BERBASIS C4.5 DAN NAIVE BAYES

Directory of Open Access Journals (Sweden)

Asti Herliana

2016-11-01

Full Text Available Abstract – Cervical cancer was the most dangerous disease and generally attacks women. Early detection through Pap Smear method was one way to prevent the desease to grow in womans cervival canal. Based on the result of Pap Smear methode, the single cell of data that known as herlev data is available. This data, then used as a reference by the experts to find the best level classification from each class of cervical cancer. The decision tree C4.5 and Naïve Bayes have proven to give the best result on 280 data trial of herlev with support by Correlation based Features Selection (CFS optimization method. The issues raised in the present study was does CFS optimization methode that combined with the classification method of C4.5 and Naïve Bayes can provide increased the accuracy results when it faced the 917 data of herlev. The results of this study show that CFS method that combined either with C4.5 methods and naïve bayes classification accuracy was decrease when compared without using CFS method. In terms of showing that CFS can not provide the best result when if confronted with big data. Keywords : optimization, classification, single cell of Pap Smear, Correlation based Features Selection, C4.5, Naïve Bayes   Abstrak – Kanker serviks merupakan penyakit yang sangat berbahaya dan pada umumnya menyerang kaum wanita. Deteksi sejak dini melalui metode Pap Smear merupakan salah satu cara untuk mencegah penyakit ini berkembang didalam saluran serviks wanita. Berdasarkan hasil dari metode Pap Smear, didapatkanlah data sel tunggal yang kini dikenal dengan data herlev. Data ini, kemudian dijadikan acuan dalam penelitian oleh para ahli dewasa ini untuk menemukan tingkat klasifikasi terbaik dari masing-masing kelas kanker serviks. Metode Decision tree C4.5 dan Naïve Bayes terbukti memberikan hasil yang terbaik pada ujicoba data herlev sebanyak 280 data dengan dukungan dari metode optimasi Correlation based Features Selection(CFS. Permasalahan

Estudio de la influencia del número de Peclet sobre la eficiencia de filtrado y la pérdida de presión de filtros de partículas diésel

OpenAIRE

BELENGUER ALMÉCIJA, SALVADOR

2016-01-01

[ES] Los límites impuestos por las normativas que regulan las emisiones contaminantes de los motores Diésel y gasolina de inyección directa hacen necesaria la presencia, entre otros sistemas de post-tratamiento, de un filtro de partículas (PF) en la línea de escape del motor. Las prestaciones de un PF varían con las condiciones fluido-dinámicas. En este proyecto se propone analizar la relación entre la variación de las condiciones de operación del filtro, caracterizadas por medio del número d...

Evaluation of deflection forces of orthodontic wires with different ligation types

Directory of Open Access Journals (Sweden)

José Fernando Castanha HENRIQUES

2017-07-01

Full Text Available Abstract The aim of this study was to evaluate deflection forces of orthodontic wires of different alloys engaged into conventional brackets using several ligation types. Stainless steel, conventional superelastic nickel-titanium and thermally activated nickel-titanium archwires tied into conventional brackets by a ring-shaped elastomeric ligature (RSEL, a 8-shaped elastomeric ligature (8SEL and a metal ligature (ML were tested. A clinical simulation device was created especially for this study and forces were measured with an Instron Universal Testing Machine. For the testing procedure, the block representing the maxillary right central incisor was moved 0.5 and 1 mm bucco-lingually at a constant speed of 2 mm/min, and the forces released by the wires were recorded, in accordance with the ISO 15841 guidelines. In general, the RSEL showed lighter forces, while 8SEL and ML showed higher values. At the 0.5 mm deflection, the 8SEL presented the greatest force, but at the 1.0 mm deflection the ML had a statistically similar force. Based on our evaluations, to obtain lighter forces, the thermally activated nickel-titanium wire with the RSEL are recommended, while the steel wire with the 8SEL or the ML are recommended when larger forces are desired. The ML exhibited the highest force increase with increased deflections, compared with the elastomeric ligatures.

Active FPGA Security Through Decoy Circuits

Science.gov (United States)

2006-03-01

enable : in std_logic; -- enable for muxes sel1, sel2 : in std_logic; sel3, sel4 : in std_logic; o1, o2 : out std_logic; o3, o4 : out...NOT i1 AND i2 AND NOT i5) OR (NOT i2 AND NOT i4 AND i5); process(enable, sel4 , sel3, sel2, sel1) – the multiplexer begin if enable = 𔃻’ then...if sel4 = 𔃺’ then o4 <= out14; else o4 <= out24; end if; if sel3 = 𔃺’ then o3 <= out13; else o3 <= out23; end if; if

Implementasi Reflector Antena Wajanbolik Pada Layanan EVDO (Evolution Data Optimized

Directory of Open Access Journals (Sweden)

BIMA BIMA

2017-06-01

Full Text Available Abstrak Antena merupakan perangkat yang memiliki peranan yang sangat penting dalam sistem komunikasi tanpa kabel (wireless. Pada penelitian ini akan diimplementasikan reflektor antena wajanbolik yang beroperasi pada frekuensi CDMA 2000 1x EVDO 1900 MHz. Antena ini menggunakan  reflektor dari wajan, dengan waveguide dari pipa paralon yang dilapisi dengan lakban alumunium, dan penerima sinyal menggunakan USB modem adapter. Antena ini ditujukan untuk menjadi media bantu  dalam  memperkuat  penerimaan sinyal  EVDO dan memaksimalkan dan kecepatan transfer data. Antena ini memberikan gain sebesar 15,530 dB berdasarkan pengukuran dan 15,156 dB berdasarkan teoritis. Pengujian menggunakan wajanbolik menunjukkan adanya peningkatan level sinyal modem yang terendah sebesar 4 dB pada pengukuran dengan kondisi indoor di siang hari serta tertinggi sebesar 19 dB pada pengukuran dengan kondisi outdoor di malam hari. Hasil dari pengujian pun menunjukkan peningkatan kecepatan transfer data rata – rata sebesar 42 KBps sampai dengan 269 KBps dibandingkan pengukuran tanpa wajanbolik.   Kata kunci: Reflektor, Waveguide, Wajanbolik, USB adapter, EVDO.    Abstract   The antenna is a device that has a very important role in wireless communication systems (wireless. In this research will be implemented wajanbolik reflector antenna which operates at frequencies of CDMA 2000 1x EVDO 1900 MHz. This antenna uses a reflector of the pan, with the waveguide of the pipe is coated with aluminum duct tape, and a signal receiver using a USB modem adapter. This antenna is intended to be a media aids in strengthening the EVDO and signal reception to maximize data transfer speeds. This antenna give a gain of 16.015 from measurement dBi and 15.156 dBi based on theory. Tests using wajanbolik showed an increase in the level of modem signals a low of 4 dB in measurement with indoor conditions during the day and 19 dB at the peak of measurements with outdoor conditions at night

Analysis of polyhydroxyalkanoates granuales in bacillus Sp. MFD11 and enterobacter Sp. SEL2

International Nuclear Information System (INIS)

Naheed, N.; Jamil, N.

2016-01-01

Bacillus sp. MFD11 (JF901809) and Enterobacter sp. SEL2 (JF901810) were isolated from agriculture waste contaminated sites. When fed with 2% glucose as a carbon source, these bacteria produced 75.26±0.45% and 76.61±0.28% PHA of their wet weight respectively. The accumulated PHA was extracted by direct addition of sodium dodysyl sulphate in the culture medium, which yielded 52.3±0.56 micro g/l and 136.21±0.45 micro g/l PHA respectively when assayed with Crotonic acid. The PHA detection medium (PDM) provided nutrient limitation condition which favored accumulation of PHA granules. A tremendous increase in cell size was observed when strain MFD11 was grown in PDM. The size of the granules as revealed by TEM micrographs spanned from 0.1 to 1.5 micro m which is quite large as compared to the size reported in the literature 0.2 to 0.5 micro m 18). (PHA polymer was analyzed by FTIR, GC/MS and proton Nuclear magnetic resonance. The intense absorption band in the spectrum at 1724-1740 cm -1 and 1215 cm -1 to 1280 corresponding to C=O and C-O stretching group, respectively, indicated that the both strains were PHA producers. GC/MS analysis indicated that the polymer produced were copolymers of PHB-co-PHV. NMR also suggested that the extracted PHA was not a homopolymer but was the blend of copolymers with 3HV in lower abundance. Differential calorimetric thermal analysis showed melting temperature of 163 and 169 degree C for PHA produced by both strains, respectively. However, the observed melting temperature was found to be lower than the standard PHB (Signa-aldrich). (author)

Triple Modular Redundancy (TMR) in a Configurable Fault-Tolerant Processor (CFTP) for Space Applications

Science.gov (United States)

2003-12-01

internal structure ARCHITECTURE rtl OF log_barrel IS signal sel1, sel2, sel3, sel4 : std_logic_vector ( 1 downto 0); signal buf0b, buf0c, buf0d...shift(2); sel3(0) <= ar_or_log and shift(2); sel4 (1) <= l_or_r and shift(3); sel4 (0) <= ar_or_log and shift(3); buf0b <= in_word(14 downto 0...mux4: word_mux4 port map ( a => buf3a, b => buf3b, c => buf3c, d => buf3d, sel => sel4 , out_word => out_word

Micro Computer Feedback Report for the Strategic Leader Development Inventory; Source Code

Science.gov (United States)

1994-03-01

SEL5 ;exit if error CALL SELZCT SCRZEN ;display select screen JC SEL4 ;no files in directory .------- display the files NOV BX, [BarPos] ;starting...SEL2 ;if not goto next test imp SEL4 ; Ecit SEL2: CUP AL,ODh ;in it a pick ? 3Z SEL3 ;if YES exit loop ------- see if an active control key was...file CALL READCOMFIG eread file into memory JC SEL5 ;exit to main menu CALL OPEN DATA FILE ;is data arailable? SEL4 : CALL RELEASE_ _MDR ;release mom

Propuesta de mejora para el mantenimiento del equipo pesado de la constructora COANDES S.A. basado en un análisis del aceite lubricante usado en los motores de combustión interna diésel

OpenAIRE

Arévalo Avalos, David Alejandro

2015-01-01

Se realiza una propuesta de mejora proactiva-predictiva para el mantenimiento efectuado por COANDES. Primero se efectúa una evaluación de criticidad de los equipos y un estudio del aceite usado en los motores de combustión interna diésel. Finalmente se propone un modelo de análisis de fallas basado en los resultados que incluye un software de interpretación de resultados de análisis de aceite. The investigation performs a proposal for proactive-predictive improvement for the maintenance by...

Micro Computer Feedback Report for the Strategic Leader Development Inventory

Science.gov (United States)

1993-05-01

POS or NEG variables CALL CREATE MEM DIR ;make a memory directory JC SELS ;exat I error CALL SELECT-SCREEN ;dlsplay select screen JC SEL4 ;no flles in...get keyboaI Input CMP AL,1Bh3 ;ls I an Esc key ? JNZ SEL2 ;X not goto nrod test G-95 JMP SEL4 ;Exit SEL2: CMP AL,OOh Iskapick? JZ SEL ;I YES exit loop...position CALL READ DATE ;gat DOS daoe od 4e CALL F4ND -ERO ;kxlae OW In data ue JC SEL.5 SEL4 : CALL RELEASE MEM DIR ;release meu block CLC ;cler carry fag

Biosensor Urea Berbasis Biopolimer Khitin Sebagai Matriks Immobilisasi

OpenAIRE

Nazruddin Nazaruddin

2007-01-01

Penelitian tentang biosensor urea menggunakan biopolimer khitin sebagai matriks immobilisasi telah dilakukan. Penelitian ini dilakukan untuk mengetahui kinerja biosensor yang dihasilkan yang meliputi sensitivitas, trayek pengukuran, limit deteksi, waktu respon, koefisien selektifitas, dan waktu hidup. Penelitian meliputi beberapa tahap yaitu pembuatan membran polimer khitin dan immobilisasi enzim urease, pelekatan membran khitin pada elektroda pH, dan pengukuran parameter kinerja elektroda. H...

Separation of calcium isotopes by counter-current electromigration in molten salts (1962); Separation des isotopes du calcium par electro-migration a contre-courant en sels fondus (1962)

Energy Technology Data Exchange (ETDEWEB)

Menes, F; Dirian, G; Roth, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1962-07-01

The method of counter-current electromigration in molten salts has been applied to calcium bromide with an alkali metal bromide added to the cathode compartment. Enrichments on calcium-46 greater than a factor of two were obtained at the anode. The mass effect was found to be about 0.06. An estimation of the cost of energy for a process based on this method has been made. (authors) [French] La methode d'electro-migration a contre-courant en sels fondus a ete appliquee au bromure de calcium additionne dans le compartiment cathodique d'un bromure alcalin. On a pu ainsi obtenir avec surete des enrichissements anodiques superieurs a 2 sur l'isotope 46, determiner l'effet de masse (environ 0,06) et faire une estimation sommaire du cout energetique d'un procede base sur cette methode. (auteurs)

MAJOR HYSTOCOMPATIBILITY COMPLEX: STRUKTUR, FUNGSI, HUBUNGAN DENGAN PENYAKIT DAN PEMANFAATAN DALAM RESPON IMUN

Directory of Open Access Journals (Sweden)

Basundari Sri Utama

2012-10-01

Full Text Available Respon imun terhadap antigen asing dapat terjadi karena kemampuan dari organisme untuk membedakan "non self" dengan "self", sehingga dapat terhindar dari efek patogen dari antigen yang masuk. Hal ini terjadi karena kemampuan polimorfisme dari komponen molekul yang terdapat pada permukaan sel presentan pada saat proses respon imun terjadi. Komponen molekul tersebut disebut MHC (Major Hystocompatibility Complex pada tikus diberi kode H-2 atau HLA (Human Leucocyt Antifen pada manusia. Pengkode genetik MHC pada tikus terletak pada kromosom 17, pada manusia terletak pada kromosom 6. MHC tersebar pada hampir semua permukaan sel tubuh. Pada tikus MHC kelas 1 terdapat sel-sel yang berinti, platelet dan sel darah merah. Pada manusia terdapat pada sel-sel yang berinti dan platelet. MHC pada tikus terutama terdapat pada sel B, makrofag, sel epithel, sel limfosit T. Pada manusia terutama terdapat pada sel B dan makrofag. Fungsi MHC kelas I diantaranya adalah reaksi penolakan jaringan, stimulasi produksi antibodi, proses interaksi antigen dengan sel T. MHC kelas II diperlukan dalam proses presentasi antigen. Pengetahuan tentang MHC/HLA seseorang, dapat dipakai untuk memperkirakan risiko seseorang mendapatkan penyakit yang bersifat herediter atau kelainan imunologik. Dengan mengetahui bahwa MHC/HLA hanya dapat mengikat peptida, hal ini dapat dimanfaatkan untuk pencegahan reaksi alergi.

SKR-1, a homolog of Skp1 and a member of the SCFSEL-10 complex, regulates sex-determination and LIN-12/Notch signaling in C. elegans

Science.gov (United States)

Killian, Darrell J.; Harvey, Elizabeth; Johnson, Peter; Otori, Muneyoshi; Mitani, Shohei; Xue, Ding

2008-01-01

Sex-determination in C. elegans requires regulation of gene transcription and protein activity and stability. sel-10 encodes a WD40-repeat-containing F-box protein that likely mediates the ubiquitin-mediated degradation of important sex-determination factors. Loss of sel-10 results in a mild masculinization of hermaphrodites, whereas dominant alleles of sel-10, such as sel-10(n1074), cause a more severe masculinization, including a reversal of the life versus death decision in sex-specific neurons. To investigate about how sel-10 regulates sex-determination, we conducted a sel-10(n1074) suppressor screen and isolated a weak loss-of-function allele of skr-1, one of 21 Skp1-related genes in C. elegans. Skp1, Cullin, and F-box proteins, such as SEL-10, are components of the SCF E3 ubiquitin ligase complex. We present genetic evidence that the sel-10(n1074) masculinization phenotype is dependent upon skr-1 and cul-1 activity. Furthermore, we show that the SKR-1(M140I) weak loss-of-function mutation interferes with SKR-1/SEL-10 binding. Unexpectedly, we found that the G567E substitution in SEL-10 caused by the n1074 allele impairs the binding of SEL-10 to SKR-1 and the dimerization of SEL-10, which may be important for SEL-10 function. Our results suggest that SKR-1, CUL-1 and SEL-10 constitute an SCF E3 ligase complex that plays an important role in modulating sex-determination and LIN-12/Notch signaling in C. elegans. PMID:18718460

Genel Bilişsel Yetenek Ölçümlerinde Süre ve Performans İlişkisinde A Tipi Kişiliğin Rolü(The Role of Type A Personality on the Relationship between Time and Performance in Measurement of General Cognitive Ability

Directory of Open Access Journals (Sweden)

Murat GÜLER

2016-04-01

Full Text Available Organizasyonların personel seçiminde kullanılan bilişsel yetenek ölçümlerinin, objektif ve yansız olarak yapılması, ihtiyaç duyulan uygun nitelikteki insan kaynağının temin edilmesi için önemli bir husustur. Ancak, bilişsel yetenek testlerinin kişilik özelliklerinden etkilendiğine dair bazı bulgular öne sürülmektedir. Mevcut araştırmada, genel bilişsel yetenek (GBY ölçümlerinde süre ve performans ilişkisinde A Tipi kişiliğin rolü 271 üniversite öğrencisinden elde edilen verilerle incelenmiştir. Veriler, A Tipi Kişilik Ölçeği ve Raven Standart Progresif Matrisler Testi ile toplanmıştır. Genel örneklemde ve A Tiplerinde GBY test performansı ve süresi ile A Tipi kişilik arasında anlamlı bir ilişki gözlenmezken, B Tiplerinde test süresinin ve yaşın GBY test performansının yordayıcısı olduğuna ilişkin bulgulara ulaşılmıştır. Objectively and impartially application of cognitive ability measurements that used in personnel selection of organizations, is a vital issue for providing needed appropriate human resources. But, some findings have been suggested that personality traits influence the measurement of cognitive abilities. In the current study the relationship between general cognitive ability (GCA and Type A personality (TAP was investigated with the data collected from 271 university students. The assessment instruments used were: Type-A Behavior Scale and Raven Standard Progressive Matrices Test. The findings revealed that, while there was no relationship between GCA, testing time and TAP in the general sample and Type A group, testing time and age were predictors of the GCA test performance in the Type B group

Perancangan Kontroler Fuzzy PD untuk Kontrol Toleransi Kesalahan Sensor

Directory of Open Access Journals (Sweden)

Moch - Hafid

2014-03-01

Full Text Available Continuous Stirred Tank Reactor (CSTR merupakan suatu plant nonlinear yang banyak digunakan di industri-industri kimia sebagai pengaduk bahan-bahan kimia. Proses di dalam CSTR sangat dipengaruhi oleh suhu, di mana suhu tersebut didapat dari uap panas yang mengalir di dalam dinding tangki melalui pipa, sehingga suhu tersebut harus dijaga supaya tetap berada pada suhu kerja dengan merancang suatu kontroler. Suhu di dalam tangki dideteksi oleh suatu sensor dan dari informasi pengukuran, kontroler akan memberikan sinyal kontrol agar proses di dalam CSTR berjalan sesuai dengan yang diinginkan. Kesalahan pengukuran pada sensor dapat menyebabkan proses tidak berjalan dengan baik, bahkan dapat mengakibatkan berhentinya proses. Fault Tolerant Control (FTC, kontrol toleransi kesalahan, dapat memberikan kompensasi sehingga proses dapat berjalan dengan baik meskipun terjadi kesalahan pengukuran pada sensor. Pada Tugas Akhir ini dilakukan perancangan kontroler fuzzy PD untuk menjaga suhu di dalam CSTR tetap pada suhu kerja. Kesalahan sensor yang terjadi pada sistem diidentifikasi dengan menggunakan model-based fault diagnosis. Dari hasil identifikasi, ditentukan kategori-kategori kesalahan sensor. Tiap kategori memiliki nilai-nilai kompensasi terhadap kesalahan yang terjadi. Dengan adanya kompensasi tersebut maka proses pada CSTR dapat beroperasi dengan baik meskipun terjadi kesalahan pengukuran pada sensor.

Exchange reactions between a molten salt and a solution of tri-butyl phosphate in a liquid silicone; Reactions d'echange entre un sel fondu et une solution de phosphate de tributyle dans un silicone liquide

Energy Technology Data Exchange (ETDEWEB)

Hertzog, D [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1964-07-01

. The equilibrium constants for the reactions: (I) Co{sup 2+} + CN{sup -} {yields} CoCN{sup +} (II) Co{sup 2+} + Cl{sup -}{yields} CoCl{sup +} have been determined: K{sub 1} 10{sup -4}, K{sub 2} = 0.16. (author) [French] L'interet actuel porte aux sels fondus s'explique par leur emploi possible clans le domaine de l'energie nucleaire, en particulier comme supports de combustibles et comme agents de reprocessing. II nous a paru interessant de considerer un sel fondu comme un solvant et d'y etudier les phenomenes de partage avec une seconde phase stable a haute temperature. Le sel choisi est un eutectique ternaire de nitrates alcalins et la seconde phase est une solution de phosphate de tributyle dans un silicone liquide. La temperature de travail est fixee a 150 deg. C. Nous avons etudie en premier lieu la stabilite des deux phases et leurs solubilites respectives a cette temperature. On a demontre que les deux solvants sont immiscibles et stables. D'autre part nous avons decrit l'extraction par la solution de silicone de differents corps en solution dans la phase sel, determine les coefficients de partage et les formules des molecules extraites. Il nous a ete possible de calculer les coefficients de partage des cations suivants extraits sous la forme nitrates: Li{sup +}, Na{sup +}, K{sup +}, Sr{sup 2+}, Ca{sup 2+}, Ba{sup 2+}, Hg{sup 2+} dont les coefficients de partage sont tres faibles: Mg{sup 2+}, Ni{sup 2+}, Co{sup 2+}, Zn{sup 2+}, dont les rendements d'extraction sont superieurs a 50 pour cent; enfin Ce{sup 3+}, La{sup 3+}, UO{sub 2}{sup 2+}, tres extraits. De meme les anions suivants ont ete extraits sous forme de sels alcalins: F{sup -}, Cl{sup -}, Br{sup -}, I{sup -}, IO{sub 3}{sup -}, CN{sup -}, SO{sub 4}{sup -}, C{sub 2}O{sub 4}{sup -}, NO{sub 2}{sup -}. Parmi ceux-ci seuls les halogenes ont des coefficients de partage non negligeables. Dans certains cas particuliers, nous avons pu etudier l'influence de la formation de complexes sur les phenomenes d

MANAJEMEN RANTAI PASOK DAN KINERJA AGROINDUSTRI PANGAN LOKAL SAGU DI PROPINSI MALUKU: SUATU PENDEKATAN MODEL PERSAMAAN STRUKTURAL

Directory of Open Access Journals (Sweden)

Natelda Rosaldiah Timisela

2014-07-01

berlangsung baik dan lancar. Hasil analisis terhadap pengukuran indeks struktural statistik seperti indeks pengukuran GFI (0,901, AGFI (0,857, TLI (0,994, CFI (0,995, CMIN/DF (1,022, RMSEA (0,015, probabilitas (0,423 dan nilai χ2 (84,834. Data tersebut berada dalam rentang nilai yang diharapkan memenuhi kriteria. Kata kunci:  Manajemen rantai pasok, kinerja agroindustri, pangan lokal, dan model persamaan struktural

KUALITAS JASA UNIT PELAKSANA TEKNIS PENGUJIAN SERTIFIKASI MUTU BARANG-LEMBAGA TEMBAKAU JEMBER

Directory of Open Access Journals (Sweden)

Shinta Setiadevi

2015-03-01

Full Text Available This study aims to 1 analyze the methods and the customer satisfaction measurement results; 2 analyze the satisfaction of customer based on alternatives method by using Servqual approach and EPA; 3 Analyze the comparison between method and the customer satisfaction measurement results; 4 formulate recommendations for improvement of measurement methods and results of customer satisfaction in the Technical Implementation Unit Testing Certification-Institute for Product Quality Tobacco Jember. The processing of the data in this study was used the analysis of Service Quality (Servqual and Expectation-Performance Analysis (EPA. The results of this study including: 1 Attributes which are considered sufficient by the IKM UPT measurement result  are nine attributes: the effectiveness and efficiency of service, courtesy, friendliness, and obtain justice and other services; 2 Attribute selected as a top priority improvements based on EPA method is the availability of equipment and the latest technology; 3 Methods and results of measuring the level of customer satisfaction can be compared based on: the number of dimensions and attributes of service; outputs and implications of measurement methods; measurement results; 4 Recommendations for improvement, the management should renew equipment and the latest technology in testing and calibration laboratories, and increase equipment and the latest technology at the service of fumigation.Keywords: EPA, service quality, servqual, UPT PSMB-LT JemberABSTRAKPenelitian ini bertujuan 1 menganalisis metode dan hasil pengukuran indek kepuasan masyarakat; 2 menganalisis tingkat kepuasan pelanggan berdasarkan alternatif metode melalui pendekatan Servqual dan EPA; 3 menganalisis perbandingan antara metode dan hasil pengukuran kepuasan pelanggan; 4 merumuskan rekomendasi perbaikan metode dan hasil pengukuran kepuasan pelanggan pada Unit Pelaksana Teknis Pengujian Sertifikasi Mutu Barang-Lembaga Tembakau Jember. Pengolahan

Social and Emotional Learning and the Work of Itinerant Teachers of the Deaf and Hard of Hearing.

Science.gov (United States)

Norman, Nancy; Jamieson, Janet R

2015-01-01

The study investigated how social and emotional learning (SEL) is reflected in the attitudes, beliefs, and practices of itinerant teachers of the deaf and hard of hearing (ITDHHs). A mixed-methods approach was taken to survey 53 ITDHHs about their comfort with teaching SEL, commitment to ongoing professional development in SEL skills, and perceptions of SEL in school cultures. Follow-up interviews with 11 ITDHHs provided a deeper perspective on how these teachers prioritize and teach SEL skills within their unique teaching role. Overall, the findings revealed that ITDHHs overwhelmingly recognized the need to provide SEL support to their students, and very often provided direct teaching of SEL skills. However, they did not necessarily feel adequately prepared, nor supported by their schools, in terms of teaching SEL. Implications of the findings for professional preparation and practice are discussed.

Life cycle analysis of biodiesel production from flesh from the tannery industry Análisis del ciclo de vida de la producción de biodiésel a partir del descarne procedente de la industria de la curtiduría

Directory of Open Access Journals (Sweden)

Jose de Jesus Rodríguez Ibarra

2012-11-01

Full Text Available The tanning industry is a source of contamination by hazardous waste generation and special handling. One of these elements is the flesh, which help this study to determine if fleshing is able to add value to a source of employment and a reduction of pollution: production of biodiesel promises to be the sustainable alternative, economically and socially viable. The study was divided into 3 unit processes with a base of 1 kg of biodiesel: a flesh collection, b cooked and rendered, c esterification and transesterification. The impact categories evaluated were the primary energy consumption and the potential nonrenewable emissions of greenhouse gases. As a result of this article, it is had that the tanning is a source of biodiesel economically and environmentally feasible for the least environmental impact occurred. With the availability of annual flesh (79 200 000 kg can be reduced combustion emissions of CO2 from the air to 11 980 300 kg per year.La industria de la curtiduría es un foco de contaminación debido a la generación de residuos peligrosos y de manejo especial. Entre estos elementos se encuentra el descarne. Sobre este elemento, el actual estudio busca determinar si puede contar con un valor agregado para nuevas fuentes de empleo y la reducción de la contaminación: la producción de biodiésel promete ser la alternativa sustentable, económica y socialmente viable. El sistema de estudio se dividió en 3 procesos unitarios con una base de 1 kg de biodiésel: a recolección del descarne, b cocido y rendido, c esterificación y transesterificación. Las categorías de impacto evaluadas fueron el consumo de energía primaria no renovable y el potencial de emisiones de gases de efecto invernadero. Como resultado del estudio se tuvo que la curtiduría resulta ser una fuente de producción de biodiésel económica y ambientalmente viable gracias a su menor impacto ambiental producido. Con la disponibilidad de descarne anual (79 200 000 kg

Arroz integral, seleno-levedura e acetato de alfa-tocoferol na dieta de frangos de corte: efeitos sobre a qualidade da carne

Directory of Open Access Journals (Sweden)

Aline Arassiana Piccini Roll

2017-05-01

Full Text Available Foram estudados os efeitos da suplementação com acetato de alfa-tocoferol (VE e seleno-levedura (SeL Sel-Plex, Alltech® Inc, sobre o pH, a capacidade de retenção de água (CRA, perdas por cocção (PC, perdas por gotejamento (PG, cor do músculo e a concentração de selênio no peito de frangos alimentados com dietas a base de milho ou arroz. A partir de 21 dias de idade 200 frangos de corte Cobb foram alojados em 38 boxes (unidade experimental num delineamento casualizado num arranjo fatorial 2x2x2 em que foram fixados os níveis de suplementação “on top” de VE (0 e 200 mg/kg, SeL (0 e 0,3 ppm e dois ingredientes da dieta (100% milho e 100% arroz integral totalizando oito tratamentos: T1 milho + 0SeL + 0VE (controle; T2 milho + 200mg/kg VE + 0SeL; T3 milho + 0VE + 0,3ppm SeL; T4 milho + 200mg/kg VE + 0,3ppm SeL; T5 arroz + 0VE +0SeL; T6 arroz + 200mg/kg VE + 0SeL; T7 arroz + 0VE + 0,3ppm SeL; T8 arroz + 200mg/kg VE + 0,3ppm SeL. A quantidade de selênio no peito foi maior (P < 0,0001 com a inclusão de 200mg/kg de VE, em comparação com os demais tratamentos. Entretanto, observou-se uma interação positiva entre VE e SeL na dieta sobre a quantidade de selênio recuperada na carne (P = 0,06. Foi encontrada melhor CRA com a inclusão de SeL e VE em dietas a base de arroz. A substituição do milho por arroz nas dietas reduziu a cor amarela na carne (P < 0,05. PC e PG não foram significativamente afetadas pelos tratamentos. O pH da carne do peito foi significativamente mais elevado nas aves recebendo dietas suplementadas de SeL. Em conclusão, a interação entre VE e SeL aumenta o selênio na carne, porém, melhorando a CRA somente em dietas a base de arroz. A substituição de milho por arroz integral reduz a intensidade da coloração amarela da carne do peito de frangos.

Kelimpahan dan Keanekaragaman Plankton di Perairan Selat Bali (Plankton Abundance and Diversity in the Bali Strait

Directory of Open Access Journals (Sweden)

Ruly Isfatul Khasanah

2013-12-01

Full Text Available Fitoplankton mempunyai peran sangat penting dalam suatu perairan, selain berada pada dasar rantai makanan sedangkan zooplankton merupakan herbivor pemangsanya. Penelitian mengenai kelimpahan dan keanekaragaman plankton di perairan Selat Bali dilakukan pada musim peralihan II (Nopember 2012 dan musim barat (Pebruari 2013. Penelitian bertujuan untuk mengamati perbedaan kelimpahan dan keanekaragaman plankton pada dua musim angin muson. Sampel air diambil dengan menggunakan water sampler sedangkan sampel plankton diambil secara horisontal dan vertikal  pada kedalaman 1 m dan 20 m dengan jaring plankton Kitahara bermata jaring 20 µm. Hasil pengukuran nutrien pada musim peralihan II memiliki kadar fosfat, nitrat, bahan organik, silikat dan klorofil-a lebih tinggi dibandingkan pada musim barat. Informasi tersebut memperkuat indikasi adanya perpindahan massa air dari lapisan yang lebih dalam ke lapisan yang lebih dangkal. Nutrien fosfat dan nitrat diperlukan untuk mempertahankan fungsi membran sel dan silikia dibutuhkan untuk pembentukan dinding sel terutama pada diatom. Hasil penelitian juga menunjukkan bahwa kelas diatom (Bacillariophyceae mencapai 95,9 % dari total jenis dan kelimpahan fitoplankton seluruh stasiun penelitian, sisanya berasal dari genus Dinophyceae. Kelimpahan fitoplankton tertinggi terjadi pada musim peralihan II dengan Rhizosolenia stolterfothii sebesar 51.405 sel.L-1 (80,1%, sedangkan pada musim barat copepoda ditemukan melimpah sebesar 8.178 ind.L-1 (88,3 %. Hasil ini mengindikasikan bahwa dengan kelimpahan plankton yang ditemukan perairan Selat Bali dinilai cukup potensial untuk mendukung kehidupan biota laut pelagis. Kata kunci: plankton, selat Bali, rhizosolenia stolterfothii, muson   Abstract Phytoplankton has important role as primary producer in the sea and act as base of food chain while zooplankton act as herbivore prey on them. Research on abundance and diversity of plankton at Bali Strait was performed during

Pengukuran Kualitas Jasa

OpenAIRE

Merianti, Maria Merry

2009-01-01

Service management is very important, because it determines Service Quality. Service Quality determines customer's satisfaction, and customer's satisfaction determines customer's behavior intentions. It is not easy to measure Service Quality, especially because service is intangible, but every service company which want to improve their service quality, should measure their service quality. We can measure service quality using SERVQUAL or SERVPERF. Research result determined that SERVPERF bet...

Perancangan, Pembuatan dan Karakterisasi Tranduser Ultrasonik 3,5 MHz Untuk Pengujian Bahan Padat

Directory of Open Access Journals (Sweden)

Mokhamad Halim Fathoni

2013-03-01

Full Text Available Dalam penelitian ini telah dibuat sepasang transduser ultrasonik untuk pengujian bahan padat. Konstruksi transduser ultrasonik yang dibuat terdiri dari holder berbahan akrilik dan kuningan, backing material berbahan styrofoam, epoxy dan busa karet, elemen aktif berbahan piezoelektrik dan matching layers menggunakan akrilik. Bahan penyusun konstruksi tersebut dilakukan pengujian terlebih dahulu untuk mengetahui pengaruhnya terhadap karakteristik transduser ultrasonik. Dan untuk menunjang pengujian, maka dibuat sebuah alat sederhana dengan metode transmisi pulsa untuk melakukan pengukuran Time of Flight(TOF gelombang ultrasonik. Karakterisasi bahan transduser dilakukan dengan melakukan beberapa tahap pengujian. Tahap pertama dilakukan  pengujian respon frekuensi pada piezoelektrik untuk mendapatkan frekuensi resonansi yang sesuai. Kemudian dilakukan pengujian bahan backing material untuk mengetahui respon impulse dari sinyal ultrasonik dan menguji bahan matching layers untuk mendapatkan faktor delay pada pengukuran. Setelah karakterisasi bahan didapatkan, maka dilanjutkan dengan implementasi transduser ultrasonik untuk pengujian cacat pada bahan. Pengujian ini menggunakan aluminium berdimensi (15x5x1cm dengan bentuk cacat yang telah ditentukan. Proses pengujian cacat ini dilakukan dengan cara scanning secara manual dengan perubahan jarak setiap 0.5 cm. Dari hasil pengujian yang telah dilakukan diperoleh  karakteristik transduser ultrasonik dengan holder berbahan akrilik, backing material berbahan styrofoam, frekuensi resonansi sebesar 3.5 MHz, bandwith sebesar 2.04 MHz, respon impulse >10 siklus, delay sebesar 1,6 us ,Q (faktor kualitas mekanis getaran harmonis sebesar 1,667 dan impedansi sebesar 78,6 ohm. Untuk pengujian cacat bahan didapatkan hasil bahwa transduser ultrasonik bisa mendeteksi adanya cacat dan mengestimasi panjang ukuran cacat dengan error pengukuran sebesar 0.5 cm. Namun, kedalaman cacat tidak bisa ditentukan sehingga

Analisis Ketelitian Geometrik Citra Pleiades 1A untuk Pembuatan Peta Dasar Lahan Pertanian (Studi Kasus: Kecamatan Socah, Kabupaten Bangkalan

Directory of Open Access Journals (Sweden)

Andreas Kelvin Pujianto

2017-01-01

Full Text Available Penggunaan citra satelit resolusi tinggi lebih tepat dan akurat dibanding citra satelit resolusi rendah. Pada saat ini, beberapa satelit dapat menghasilkan citra dengan resolusi spasial kurang dari 1 m. Selain itu, salah satu keuntungan dari data citra satelit resolusi tinggi untuk deteksi dan inventarisasi sumber daya alam adalah setiap lembar (scene citra ini mencakup wilayah yang sangat luas yaitu sekitar 60–180 km2 (360.000–3.240.000 ha [5]. Interpretasi visual pada citra Pleiades 1A dan survei lapangan telah membuktikan bahwa mayoritas daerah Kecamatan Socah memiliki tutupan lahan berupa lahan pertanian yang lebih banyak dibandingkan dengan kecamatan lainnya di Kabupaten Bangkalan. Alasan tersebut menjadikan Kecamatan Socah sebagai lokasi penelitian. Proses rektifikasi citra menggunakan koordinat titik horizontal (X,Y dari Ground Control Point (GCP yang didapatkan dari pengukuran lapangan menggunakan GPS geodetik dengan metode static dengan lama pengukuran 45 menit tiap baseline. Sedangkan untuk uji ketelitian citra menggunakan pengukuran titik Independent Control Point (ICP yang didapatkan dari pengukuran GPS geodetik dengan metode static dengan lama pengukuran 15 menit. Nilai Root Mean Square Error (RMSE titik ICP dari transformasi affine sebesar 0,645 m, sedangkan polynomial orde-2 sebesar 0,533 m. Masing-masing nilai RMSE titik ICP kemudian dikalikan dengan koefisien Circular Error 90% (CE90 dari Perka BIG no. 15 tahun 2014 maka didapatkan nilai ketelitian geometric sebesar 0,979 m pada affine dan 0,809 m pada polynomial orde-2. Hasil ketelitian geometric dari kedua metode transformasi menunjukkan nilai ≤ 1 m, sehingga citra Pleiades 1A memenuhi syarat untuk dijadikan sebagai peta dasar skala 1:5.000 dengan kategori kelas 1.

Rancang Bangun Prototipe Monitoring Suhu Tubuh Manusia Berbasis O.S Android Menggunakan Koneksi Bluetooth

Directory of Open Access Journals (Sweden)

Moh Fajar Rajasa Fikri

2013-03-01

Full Text Available Tanda-tanda vital kesehatan manusia dapat diketahui dari suhu tubuh, pernapasan, tekanan darah, dan denyut nadi. Dalam tugas akhir ini, dirancang sebuah prototipe monitoring suhu tubuh manusia berbasis android menggunakan koneksi bluetooth dengan performansi dalam bentuk jaket yang terdiri dari tiga buah titik pengukuran. Langkah-langkah yang dilakukan untuk merancang sistem pengukuran suhu tubuh adalah dengan mendesain sistem perangkat keras dan perangkat lunak. Sensor yang digunakan adalah IC-LM35 yang tersebar di tiga titik pengukuran. Sensor ini sebagai pendeteksi perubahan suhu tubuh, kemudian hasil perubahan suhu akan dibaca dan diproses pada mikrokontroler ATMega8a-pu. Setelah data terproses, selanjutnya data akan dikirimkan ke perangkat android melalui koneksi bluetooth. Setelah dilakukan pengukuran dan analisis data, dapat diketahui bahwa alat ini memiliki respon dinamis settling time sebesar 5 menit. Jarak maksimum koneksi perangkat adalah 35 meter, dan kemampuan baterai sebesar 9 volt selama 90 menit. Alat ini memiliki nilai eror akurasi sebesar 0.29150C, eror presisi sebesar 0.8°C untuk sensor A (mulut, dan nilai eror akurasi sebesar 0.4149°C, eror presisi sebesar 0.2974°C untuk sensor B (ketiak kanan, dan nilai eror akurasi sebesar 0.3846°C, eror presisi sebesar 0.5956°C untuk sensor C (ketiak kiri

A CAMAC based knob controller for the LAMPF control system

International Nuclear Information System (INIS)

Smith, W.; Bjorklund, E.

1987-01-01

The control computer for the Los Alamos Meson Physics Facility (LAMPF) has been recently upgraded from an SEL-840 to a VAX 11/780 running the VMS operating system. As part of this upgrade, a CAMAC-based knob controller was developed for the new control system. The knobs allow the facility operators to have slew control over software selectable accelerator devices. An alphanumeric display associated with each knob monitors the progress of the selected device. This paper describes the system requirements for the new LAMPF knob controller, and the resulting hardware and software design

A Database Design for the Brazilian Air Force Military Personnel Control System.

Science.gov (United States)

1987-06-01

GIVEN A RECNum GET MOVING HISTORICAL". 77 SEL4 PlC X(70) VALUE ". 4. GIVEN A RECNUM GET NOMINATION HISTORICAL". 77 SEL5 PIC X(70) VALUE it 5. GIVEN A...WHERE - "°RECNUM = :RECNUM". 77 SQL-SEL3-LENGTH PIC S9999 VALUE 150 COMP. 77 SQL- SEL4 PIC X(150) VALUE "SELECT ABBREV,DTNOM,DTEXO,SITN FROM...NOMINATION WHERE RECNUM 77 SQL- SEL4 -LENGTH PIC S9999 VALUE 150 COMP. 77 SQL-SEL5 PIC X(150) VALUE "SELECT ABBREVDTDES,DTWAIVER,SITD FROM DESIG WHERE RECNUM It

Interaksi Ekstrak Sambiloto (Andrographis paniculata (Burm.F.Ness dengan Glibenklamid terhadap Ekspresi Gen CYP3A4 pada Kultur Sel HepG2

Directory of Open Access Journals (Sweden)

Andzar Fikranus Shofa

2017-12-01

Full Text Available Diabetes melitus (DM merupakan salah satu penyakit metabolik kronis yang ditandai dengan hiperglikemia. Berbagai terapi dilakukan untuk mengatasi hiperglikemia, baik dengan menggunakan obat antidiabetes oral maupun tanaman herbal berkhasiat antidiabetes. Sambiloto (Andrographis paniculata (Burm.F.Nees merupakan salah satu herbal antidiabetes yang banyak dikonsumsi masyarakat Indonesia. Andrografolida merupakan zat aktif yang terdapat dalam sambiloto yang berperan sebagai agen antidiabetes. Namun, dalam banyak kasus kombinasi antara herbal dan obat sintesis menyebabkan interaksi jika digunakan pada waktu bersamaan. Penelitian ini bertujuan untuk memperoleh data interaksi ekstrak etanol herba sambiloto dengan glibenklamid terhadap ekspresi gen CYP3A4 pada kultur sel HepG2. Hasil penelitian ini menunjukkan bahwa terjadi penurunan ekspresi gen CYP3A4 pada pengujian sampel tunggal maupun kombinasi antara ekstrak etanol herba sambiloto dan glibenklamid dengan bertambahnya konsentrasi. Pada konsentrasi 50 dan 100 μg/mL sambiloto, glibenklamid, dan kombinasinya menyebabkan penurunan ekspresi gen CYP3A4 sekitar 0,82, 0,70; 0,89, 0,53; 0,84, 0,72. Berdasarkan hasil tersebut dapat disimpulkan terjadi penurunan ekspresi gen CYP3A4 dengan bertambahnya konsentrasi sampel.

Comportement mécanique des cavités dans le sel. Etat actuel de nos connaissances Mechanical Behaviour of Salt Cavities. Present State of Our Knowledge

Directory of Open Access Journals (Sweden)

Boucly P.

2006-11-01

Full Text Available L'utilisation depuis dix ans des premières cavités salines créées sur le site de Tersanne s'est accompagnée d'une réduction de leur volume relativement importante. Cette observation a conduit le Gaz de France à développer d'importantes études sur le comportement rhéologique du sel dans lequel sont creusées les cavités. Ces études, effectuées en collaboration avec des laboratoires universitaires, ont consisté en de nombreux essais en laboratoire (essais de longue durée à la température des terrains visant à déterminer les lois de comportement du matériau. Parallèlement, des modèles de calcul de divers degrés de complexité ont été élaborés afin de prendre en compte ces lois dans l'estimation de la stabilité et de la tenue à long terme de la cavité. Ces études ont abouti récemment à la mise au point d'un premier modèle de comportement du sel qui rend compte de l'ensemble des observations effectuées à ce jour sur les cavités. Grâce à ce modèle, il est maintenant possible d'étudier quelle influence a sur leur volume un type d'utilisation donné des cavités. The exploitation over the last ten years of the first salt cavities created in the Tersanne area has resulted in a relatively large decrease in their volume. This observation led Gaz de France to do extensive research on the rheological behavior of the salt into which cavities are leached. This research, performed in cooperation with university laboratories, consisted of numerous laboratory tests (long-duration tests at formation temperatures to determine the behavior laws of the material. At the same time, models for computing different degrees of complexity were developed to take these laws into account in evaluating the stability and long-term resistance of the cavity. This research has recently resulted in the development of an initial salt-behavior model involving all the observations made concerning these cavities to date. This model can now be

Dietary supplementation of chelated selenium and broiler chicken meat qualitySuplementação de selênio quelatado na ração e qualidade da carne de frango

Directory of Open Access Journals (Sweden)

Massami Shimokomaki

2012-02-01

Full Text Available The glutathione peroxidase (GSH-Px is selenium-containing enzyme, which catalyses the reduction of hydrogen peroxides and lipid hydroperoxides preventing the oxidative damages in animal tissues. The selenium (Se deficiency increases the need for vitamin E. The aim of this study was to investigate the effect of dietary supplementation of chelated Se on the poultry meat quality. Fourteen Cobb chicks with 1 day of age were divided into two groups: C-Control group (without supplementation and S-Supplemented group (with 0.03mg of chelated Se.kg-1 of feed. Birds at 42 days of age were slaughtered and boneless skinless chicken thighs were collected and stored at –18ºC for 30 days. Thighs were analyzed for the cooking loss, lipid oxidation by Thiobarbituric-Acid-Reactive Substances (TBARS and GSH-Px activity by coupled assay procedure recording the NADPH (nicotinamide adenine dinucleotide phosphate reduced oxidation. Samples of Supplemented group presented 33.8% less water after cooking (p ? 0.05 and were 23.6% (p ? 0.10 less oxidized when compared with samples of group Control. The GSH-Px activity of thighs did not differ significantly (p> 0.05 between groups Supplemented and Control. The supplementation with 0.03mg of Se in the kg of feed improved the meat quality by reducing the lipid oxidation and cooking loss, however did not increase the GSH-Px activity.O selênio (Se é componente da enzima glutationa peroxidase (GSH-Px que catalisa a redução de peróxido de hidrogênio e peróxido lipídico, prevenindo danos oxidativos nos tecidos animais. A deficiência de Se aumenta a necessidade de vitamina E pelos animais. O objetivo deste trabalho foi avaliar o efeito da suplementação de selênio quelatado sobre a qualidade da carne de frango. Os 14 pintinhos de corte da linhagem Cobb de 1 dia de idade foram divididos em 2 grupos: C-Controle (sem suplementação e S-Suplementado com 0,03mg Se quelatado. kg-1 de ração. Os frangos com 42 dias de

Perbandingan Aktivitas Antioksidan Campuran Ekstrak-Etanol A.indica dan C.asiatica terhadap Ekstrak-Etanol A.indica

Directory of Open Access Journals (Sweden)

Kemas R Notariza

2017-09-01

Full Text Available Radikal bebas, dalam kadar rendah atau menengah, mempunyai peran fisiologis bagi kehidupan sel tubuh. Pada konsentrasi tinggi, radikal-bebas dapat memicu stres oksidatif yang menjadi dasar patogenesis berbagai penyakit. Suplai antioksidan eksogen dibutuhkan untuk membantu kinerja antioksidan endogen dalam menangkal stres oksidatif. Ekstrak-etanol Acalypha indica dan Centella asiatica masing-masing diketahui memiliki aktivitas antioksidan. Penelitian ini bertujuan untuk mengetahui perbandingan aktivitas antioksidan campuran ekstrak-etanol Acalypha indica dan Centella asiatica terhadap ekstrak-etanol Acalypha indica. Kombinasi ekstrak diharapkan mampu meningkatkan aktivitas antioksidan yang dihasilkan dan menurunkan dosis yang digunakan. Aktivitas antioksidan ekstrak diukur dengan metode spektrofotometri melalui uji DPPH. Kandungan fitokimia ekstrak juga diuji secara kualitatif. Hasil uji kualitatif menunjukkan bahwa ekstrak-etanol Acalypha indica maupun campuran ekstrak-etanol Acalypha indica dan Centella asiatica positif mengandung fitokimia berupa flavonoid dan steroid. Hasil pengukuran aktivitas antioksidan menunjukkan bahwa Vitamin C yang menjadi kontrol positif menunjukkan nilai EC50 sebesar 0,012 mg/mL. Nilai EC50 ekstrak-etanol Acalypha indica adalah 13,68 mg/mL, sedangkan nilai EC50 campuran ekstrak-etanol Acalypha indica dan Centella asiatica adalah 39,65 mg/mL. Nilai EC50 yang lebih kecil mengindikasikan aktivitas antioksidan yang lebih tinggi. Dengan demikian, aktivitas antioksidan campuran ekstrak-etanol Acalypha indica dan Centella asiatica lebih rendah dibandingkan dengan ekstrak-etanol Acalypha indica.   Kata kunci: Acalypha indica; aktivitas antioksidan; Centella asiatica Normal 0 false false false EN-US X-NONE X-NONE

Identification and Characterization of Genes That Interact with Lin-12 in Caenorhabditis Elegans

OpenAIRE

Tax, F. E.; Thomas, J. H.; Ferguson, E. L.; Horvitz, H. R.

1997-01-01

We identified and characterized 14 extragenic mutations that suppressed the dominant egg-laying defect of certain lin-12 gain-of-function mutations. These suppressors defined seven genes: sup-17, lag-2, sel-4, sel-5, sel-6, sel-7 and sel-8. Mutations in six of the genes are recessive suppressors, whereas the two mutations that define the seventh gene, lag-2, are semi-dominant suppressors. These suppressor mutations were able to suppress other lin-12 gain-of-function mutations. The suppressor ...

Protection device for a thermonuclear device

International Nuclear Information System (INIS)

Kawashima, Shuichi.

1986-01-01

Purpose: To exactly detect the void coefficients of coolants even under high magnetic fields thereby detect the overheat of a thermonuclear device at an early stage. Constitution: The protecting device of this invention comprises a laser beam generation device, a laser beam detection device and an accident detection device. The laser generation device always generates laser beams, which are permeated through coolants and detected by the laser beam detection device, the optical amount of which is transmitted to the accident detection device. The accident detection device judges the excess or insufficiency of the detected optical amount with respect to the optical amount of the laser beams under the stationary state as a reference and issues an accident signal. Since only the optical cables that do not undergo the effect of the magnetic fields are exposed to high magnetic fields in the protection device of this invention, a high reliability can be maintained. (Kamimura, M.)

PENGARUH JENIS ANODA PADA PROSES PEMULIHAN LOGAM NIKEL DARI TIRUAN AIR LIMBAH ELECTROPLATING MENGGUNAKAN SEL ELEKTRODEPOSISI

Directory of Open Access Journals (Sweden)

Djaenudin Dhaenudin

2013-11-01

Full Text Available EFFECT OF ANODES TYPES ON NICKEL RECOVERY FROM SYNTHETIC ELECTROPLATING WASTE ELECTRODEPOSITION CELLS. A study concerning the recovery of nickel from electroplating wastewater artificial solution. The study was conducted with a batch system using electrodeposition cell consisting of two spaces separated by water hyacinth leaf, copper cathode plate, H2SO4 solution anolyte, catholyte solution of NiSO4 plus NaCl supporting electrolyte and anode varied. Electrodeposition performed at the direct current of 5V power for 4 hours each run. The research objective was to obtain the best anode in nickel electrodeposition process of electroplating waste artificial solution. Graphite, stainless steel type AISI 316 and the lead were used as a variation of the anode. Concentration of nickel in the catholyte at baseline 2200 mg/L. The results showed that the anode was a graphite anode with best value decreased by 72.44% nickel concentration, deposition of nickel on the cathode of 0.188 grams and specific energy values ​​of 6.1625 kWh/kg.nickel.   Telah dilakukan penelitian tentang pemulihan logam nikel dari larutan tiruan air limbah electroplating. Penelitian dilakukan dengan sistem batch menggunakan sel elektrodeposisi yang terdiri dari dua ruang yang dipisahkan dengan daun eceng gondok, katoda pelat tembaga, anolit larutan H2SO4, katolit larutan NiSO4 ditambah elektrolit pendukung larutan NaCl dan anoda divariasikan. Elektrodeposisi dilakukan pada listrik searah sebesar 5V selama 4 jam setiap tempuhan. Tujuan penelitian adalah memperoleh anoda terbaik pada proses elektrodeposisi nikel dari larutan tiruan limbah electroplating. Grafit, Stainless Steel  tipe AISI 316 dan timbal digunakan sebagai variasi jenis anoda. Konsentrasi nikel dalam katolit pada awal penelitian 2200 mg/L. Hasil penelitian menunjukkan bahwa anoda grafit merupakan anoda yang paling baik dengan nilai penurunan konsentrasi nikel sebesar 72,44%, deposisi nikel di katoda sebesar 0

"Vastu panna viimase meheni!" : Mälestused lahingutest Saaremaal 1941-1945 / Mart Laar

Index Scriptorium Estoniae

Laar, Mart, 1960-

2004-01-01

Rets. rmt.: Halten bis zum letzen Mann : der Kampf um Ösel : Erinnerungen an die Jahre 1941-1946 / herausgegeben von der Interessengemeinschaft "Ösel 1941-1944". Büsum : Interessengemeinschaft "Ösel 1941-1944", 2004

PERFORMA FOTOSINTESIS Kappaphycus sp. (strain Sumba) YANG DIUKUR BERDASARKAN EVOLUSI OKSIGEN TERLARUT PADA BEBERAPA TINGKAT SUHU DAN CAHAYA

OpenAIRE

Lideman Lideman; Asda Laining

2015-01-01

Penelitian ini bertujuan untuk mengetahui pengaruh suhu dan cahaya terhadap laju fotosintesis Kappaphycus sp. (strain Sumba) yang diukur berdasarkan perubahan oksigen terlarut. Pengukuran laju fotosintesis Kappaphycus sp. pertama-tama dilakukan pada suhu 20oC, 24oC, 28oC, dan 32oC pada tingkat cahaya 353 μmol photons m-2 s-1 untuk mendapatkan kurva fotosintesis versus suhu (kurva P-T). Selanjutnya, pengukuran laju fotosintesis dilakukan pada suhu 20oC, 24oC, dan 28oC dengan intensitas cahaya ...

Device-Centric Monitoring for Mobile Device Management

Directory of Open Access Journals (Sweden)

Luke Chircop

2016-03-01

Full Text Available The ubiquity of computing devices has led to an increased need to ensure not only that the applications deployed on them are correct with respect to their specifications, but also that the devices are used in an appropriate manner, especially in situations where the device is provided by a party other than the actual user. Much work which has been done on runtime verification for mobile devices and operating systems is mostly application-centric, resulting in global, device-centric properties (e.g. the user may not send more than 100 messages per day across all applications being difficult or impossible to verify. In this paper we present a device-centric approach to runtime verify the device behaviour against a device policy with the different applications acting as independent components contributing to the overall behaviour of the device. We also present an implementation for Android devices, and evaluate it on a number of device-centric policies, reporting the empirical results obtained.

Perbandingan Ko-kultur 2D dan 3D dengan Metode Hanging Drop untuk Menghasilkan Micro-environment yang Lebih Relevan Secara Klinis

Directory of Open Access Journals (Sweden)

Radiana Dhewayani Antarianto

2017-09-01

Full Text Available Ko-kultur sel 2 dimensi (2D kurang menyerupai micro-environment seperti in vivo sedangkan ko-kultur 3 dimensi (3D membentuk mikromassa yang lebih mirip micro-environment in vivo sehingga bermanfaat dalam penelitian biologi dasar. Penelitian ini membandingkan ko-kultur 2D dan 3D sel punca serta sel stelata hepatik dengan metode hanging drop untuk menilai morfologi sel dan pembentukan sferoid dari mikromassa yang terbentuk. Studi in vitro ini dilakukan di Pusat Virologi dan Kanker Patobiologi (PRVKP UI dan laboratorium histologi FKUI pada bulan September 2015 sampai Oktober 2016 menggunakan sel punca yang diisolasi dari darah tali pusat manusia dan sel lestari LX2 (stelata hepatik manusia. Darah tali pusat disortir dengan MACS CD34 dan dianalisis flowcytometry. Ko-kultur sel punca sumsum tulang atau darah tali pusat dan LX2 dilakukan dengan metode hanging drop untuk ko-kultur 2D dan ko-kultur 3D. Triplikasi eksperimen dilakukan untuk tiap set ko-kultur. Hasilnya menunjukkan terdapat perbedaan morfologi ko-kultur 2D dan 3D hanging drop dibandingkan monokultur. Di ko-kultur 2D terdapat mikromassa dan di monokultur 2D tidak terbentuk mikromassa. Di ko-kultur 3D hanging drop, terdapat sferoid yang lebih kecil dibandingkan monokultur 3D hanging drop. Morfologi sel ko-kultur 2D dan 3D dengan metode hanging drop dibandingkan monokultur menunjukkan perubahan fenotip sel-sel yang tergabung dalam mikromassa. Normal 0 false false false false IN X-NONE X-NONE Normal 0 false false false false IN X-NONE X-NONE Social and Emotional Learning and Academic Achievement in Portuguese Schools: A Bibliometric Study

Directory of Open Access Journals (Sweden)

Ana M. Cristóvão

2017-11-01

Full Text Available Social and Emotional Learning (SEL is an educational movement that is gaining ground throughout the world. We can define SEL as the capacity to recognize and manage emotions, solve problems effectively, and establish positive relationships with others. Research has demonstrated the significant role of SEL in promoting healthy student development and academic achievement. Extensive research confirms that SEL competencies: can be taught, that they promote positive development and reduce problem behaviors, and that they improve students' academic achievement and citizenship. At the international level, several rigorous studies have identified programs and practices that promote SEL. In Portugal, however, no review has yet been published regarding the implementation of SEL programs. Such a study would elucidate the current panorama of SEL programs in Portugal. This study aims to identify research on SEL programs implemented in Portuguese schools and the relationship of those programs with academic achievement. To this end, we have consulted the following databases: Scientific Repository of Open Access of Portugal (RCAAP, Online Knowledge Library (b-on, and Web of Science (WoS. The criteria were: (a all time frames; (b publications in either Portuguese or English; (c programs that developed socio-emotional competencies in Portuguese schools; (d academic levels including elementary, middle, and high school and (e students of regular education. Few publications on SEL programs implemented in Portugal were found, although the recent decade has witnessed an upsurge of interest in the topic, principally that arising from academic research.

[Oral health status evaluation of pre-school children: longitudinal epidemiologic study (1993-1994), Córdoba, Argentina].

Science.gov (United States)

Battellino, L J; Cornejo, L S; Dorronsoro de Cattoni, S T; Luna Maldonado de Yankilevich, E R; Calamari, S E; Azcura, A I; Virga, C

1997-06-01

A one-year longitudinal survey was carried out on a sample of the Cordoba City 4-year old kindergarten population (n = 820); so as to determine the role of several variables upon the incidence of caries. The dmf-t, dmf-s, oral hygiene and oral health indexes as well as incidence rates and caries relative risks of caries were inversely related to the socioeconomic level (SEL) of the children involved. Thus in the SEL III (typical proletariat, non-typical proletariat and sub-proletariat) children, the relative risk of caries was almost five times higher (RR = 4.9) than in the SEL I (entrepreneureal and managerial bourgeoisie) children. In SEL I, almost all new lesions occurred on smooth surfaces (61.2%), while in SEL III the molar occlusal faces were mainly affected (66.3%). Daily sugar intake was higher in SEL III children but experience of caries showed poor correlation to the amount (r = 0.40) and frequency (r = 0.52) of carbohydrate intake. No significant interlevel differences were observed in the biochemical salivary parameters analyzed. Assisted toothbrushing and fluoride topications strongly lowered the incidence of caries among SEL III children, also making the corresponding rates fall almost to SEL I values (0.31, 0.23 and 0.22 vs. 0.21). In conclusion, SEL III children should be treated prophylactically with effective preventive measures, because of their susceptibility to caries. Such preventive measures include assisted toothbrushing and fluoride topications.

Galectin-1 Is an Interactive Protein of Selenoprotein M in the Brain

Directory of Open Access Journals (Sweden)

Qiong Liu

2013-11-01

Full Text Available Selenium, an essential trace element for human health, mainly exerts its biological function through selenoproteins. Selenoprotein M (SelM is one of the highly expressed selenoproteins in the brain, but its biological effect and molecular mechanism remain unclear. Thus, the interactive protein of SelM was investigated in this paper to guide further study. In order to avoid protein translational stop, the selenocysteine-encoding UGA inside the open reading frame of SelM was site-directly changed to the cysteine-encoding UGC to generate the SelM' mutant. Meanwhile, its N terminal transmembrane signal peptide was also cut off. This truncated SelM' was used to screen a human fetal brain cDNA library by the yeast two-hybrid system. A new interactive protein of SelM' was found to be galectin-1 (Gal-1. This protein-protein interaction was further verified by the results of fluorescence resonance energy transfer techniques, glutathione S-transferase pull-down and co-immunoprecipitation assays. As Gal-1 plays important roles in preventing neurodegeneration and promoting neuroprotection in the brain, the interaction between SelM' and Gal-1 displays a new direction for studying the biological function of SelM in the human brain.

Collected software engineering papers, volume 11

Science.gov (United States)

1993-01-01

This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from November 1992 through November 1993. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. This is the 11th such volume of technical papers produced by the SEL. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. Additional information about the SEL and its research efforts may be obtained from the sources listed in the bibliography at the end of this document.

Collected software engineering papers, volume 12

Science.gov (United States)

1994-01-01

This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from November 1993 through October 1994. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. This is the 12th such volume of technical papers produced by the SEL. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. Additional information about the SEL and its research efforts may be obtained from the sources listed in the bibliography at the end of this document.

Power source device for thermonuclear device

International Nuclear Information System (INIS)

Ozaki, Akira.

1992-01-01

The present invention provides a small sized and economical power source device for a thermonuclear device. That is, the device comprises a conversion device having a rated power determined by a power required during a plasma current excitation period and a conversion device having a rated power determined by a power required during a plasma current maintaining period, connected in series to each other. Then, for the former conversion device, power is supplied from an electric power generator and, for the latter, power is supplied from a power system. With such a constitution, during the plasma electric current maintaining period for substantially continuous operation, it is possible to conduct bypassing paired operation for the former conversion device while the electric power generator is put under no load. Further, since a short period rated power may be suffice for the former conversion device and the electric power generator having the great rated power required for the plasma electric current excitation period, they can be reduced in the size and made economical. On the other hand, since the power required for the plasma current maintaining period is relatively small, the capacity of the continuous rated conversion device may be small, and the power can be received from the power system. (I.S.)

Analysis of the Interactions Between Thioredoxin and 20 Selenoproteins in Chicken.

Science.gov (United States)

Liu, Qi; Yang, Jie; Cai, Jingzeng; Luan, Yilin; Sattar, Hamid; Liu, Man; Xu, Shiwen; Zhang, Ziwei

2017-10-01

Thioredoxin (Trx) is a small molecular protein with complicated functions in a number of processes, including inflammation, apoptosis, embryogenesis, cardiovascular disease, and redox regulation. Some selenoproteins, such as glutathione peroxidase (Gpx), iodothyronine deiodinase (Dio), and thioredoxin reductase (TR), are involved in redox regulation. However, whether there are interactions between Trx and selenoproteins is still not known. In the present paper, we used a Modeller, Hex 8.0.0, and the KFC2 Server to predict the interactions between Trx and selenoproteins. We used the Modeller to predict the target protein in objective format and assess the accuracy of the results. Molecular interaction studies with Trx and selenoproteins were performed using the molecular docking tools in Hex 8.0.0. Next, we used the KFC2 Server to further test the protein binding sites. In addition to the selenoprotein physiological functions, we also explored potential relationships between Trx and selenoproteins beyond all the results we got. The results demonstrate that Trx has the potential to interact with 19 selenoproteins, including iodothyronine deiodinase 1 (Dio1), iodothyronine deiodinase 3 (Dio3), glutathione peroxidase 1 (Gpx1), glutathione peroxidase 2 (Gpx2), glutathione peroxidase 3 (Gpx3), glutathione peroxidase 4 (Gpx4), selenoprotein H (SelH), selenoprotein I (SelI), selenoprotein M (SelM), selenoprotein N (SelN), selenoprotein T (SelT), selenoprotein U (SelU), selenoprotein W (SelW), selenoprotein 15 (Sep15), methionine sulfoxide reductase B (Sepx1), selenophosphate synthetase 1 (SPS1), TR1, TR2, and TR3, among which TR1, TR2, TR3, SPS1, Sep15, SelN, SelM, SelI, Gpx2, Gpx3, Gpx4, and Dio3 exhibited intense correlations with Trx. However, additional experiments are needed to verify them.

Avaliação do Potencial Tóxico de Latossolos e Chernossolos Acrescidos de Lodo de Esgoto Utilizando Bioensaios com Oligoquetas da Espécie Eisenia andrei.

Directory of Open Access Journals (Sweden)

Ricardo Gonçalves Cesar

2008-08-01

Full Text Available Sewage Sludge (SEL has been used in agricultural activities to improve physical and chemical properties of soils. However, thiscompound also contains very high levels of heavy metals and pathogenic microorganisms, which can cause serious negative effects onbiota and human health. This paper aims to assess potential toxicity of latosols and chernosols amended with SEL, using Eisenia andreiearthworms. Acute toxicity and behavioral tests were performed according to ASMT (2004 and ISO (2002 procedures, respectively.Heavy metals determination was made by Atomic Absorption, and mineralogical characterization by Ray-X Difratometry. Biomass losswas evaluated considering average individual weight. Mercury, lead, zinc and cooper determination in SEL in natura and soils amendedwith SEL revealed values higher than that recommended by Brazilian legislation. SEL addition to the soils caused no mortality to theorganisms, while SEL in natura provoked lethal effects on 100% of the earthworms. Latosol in natura demonstrated higher mortalityin comparison to chernosol in natura Behavioral tests indicated that 98,3% and 96,43% of the organisms avoided SEL in natura andlatosol with SEL, respectively. However, only 31% of the organisms avoided chernosol with SEL, suggesting a lower level of toxicity incomparison to latosol. Possibly the natural properties of the studied soils (fertility, organic matter content, clay mineralogy, etc. playedan important role in the avoidance behavior of the organisms. Probably expansive clays presence in chernosol stimulates ions adsorptionand their concentrations decreasing in soil solution; consequently contaminants bioavailability also tends to decrease. Biomass loss resultsrevealed that the SEL addition decreased the weight loss of the tested organisms, and biomass losses were higher for latosol than forchernosol. In conclusion, it is expected that these results can be used in human health and ecological risk assessment, as well as

Single-event effect ground test issues

International Nuclear Information System (INIS)

Koga, R.

1996-01-01

Ground-based single event effect (SEE) testing of microcircuits permits characterization of device susceptibility to various radiation induced disturbances, including: (1) single event upset (SEU) and single event latchup (SEL) in digital microcircuits; (2) single event gate rupture (SEGR), and single event burnout (SEB) in power transistors; and (3) bit errors in photonic devices. These characterizations can then be used to generate predictions of device performance in the space radiation environment. This paper provides a general overview of ground-based SEE testing and examines in critical depth several underlying conceptual constructs relevant to the conduct of such tests and to the proper interpretation of results. These more traditional issues are contrasted with emerging concerns related to the testing of modern, advanced microcircuits

Prototype Automatic Target Screener.

Science.gov (United States)

1980-05-19

JLIST OF TABLES I Table Page 1 PATS Modules 4 2 Vector Read/Write Command Format ( SEL4 ) 29 1 3 Read Vector Data Command Format ( SEL4 ) 30 J 4 Use Matrix...VECTOR READ/WRITE COMMAND FORMAT ( SEL4 ) S 1,4A Output 15 14 1:3 12 11 10 9 8 7 6 5 4 3 2 1 0 Da taI To VNUM VDIR V LEN InterfaceIT TNT = 1 Intensify...elements ! | 29 I TABLE 3. READ VECTOR DATA COMMAND FORMAT ( SEL4 ) SEL4 Read Vector Data Input 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Da ta D D V To 0 A D

PENGUKURAN PREFERENSI KONSUMEN BAKSO

Directory of Open Access Journals (Sweden)

Marta Catur Pamungkas

2016-11-01

Full Text Available Consumers make purchases based on certain choices. These options include product attributes and attribute level. Meatball has attributes such as texture, price, and taste. These attributes affect the consumer buying process . The aim  of this study was to determine the utility values for all attributes and attribute level of meatballs that have been selected by consumers. This research is  a qualitative and quantitative research conducted in Bangkalan Regency. Respondents of this study consisted of 60 people. The results of this research  revealed that the value of the utility for the level of preference of texture was soft texture with a utility value of  0.058, meatballs price at Rp 500.00 with utility value of 0.006, and the selected flavor attributes are taste spicy sauce with  utility value of 0.36. Attributes to contribute to consumer's decision to buy meatballs were flavor at 63.321 % , texture at 20.114 % and meatball price at 16.565 % contribution

TERMOMETER 8 KANAL

Directory of Open Access Journals (Sweden)

Muhammad Andang Novianta

2013-04-01

Full Text Available Pada saat ini di dunia industri sangat diperlukan adanya suatu pengukuran yang dapat melakukan pembacaan data lebih dari satu parameter dengan hanya satu tampilan, seperti halnya pengukuran suhu pada beberapa peralatan pemanas untuk mengetahui suhu panas, dingin dan sedang. Pada penelitian ini dirancang suatu instrumen pengukuran suhu yang memiliki banyak masukan dengan satu keluaran tampilan data. Sistem yang akan dikembangkan menggunakan transduser LM35 dan multiplekser 3 bit ADC0808 serta mikrokontroler AT89S51 yang digunakan untuk mengendalikan ADC dalam membaca kedelapan masukan. Dengan sebuah tombol maka kedelapan parameter suhu dapat ditampilkan ke tampilan secara bergantian. Berdasarkan percobaan didapatkan bahwa LM35 memiliki linearitas yang baik. LM35 hanya memiliki kesalahan 0,25 – 0,5 ºC. Pembacaan tampilan tidak bisa stabil karena proses konversi ADC 0808 yang tidak bisa stabil. Ketidakstabilan ADC ini disebabkan karena resolusi ADC yang terlalu kecil. Jika masukan ADC dikuatkan hingga 2 kali, proses konversi ADC akan stabil. Jika karakteristik LM35 dipenuhi, pembacaan temperatur akan memberikan ketelitian yang tinggi walaupun tanpa kalibrasi.

Device-Centric Monitoring for Mobile Device Management

OpenAIRE

Chircop, Luke; Colombo, Christian; Pace, Gordon J.

2016-01-01

The ubiquity of computing devices has led to an increased need to ensure not only that the applications deployed on them are correct with respect to their specifications, but also that the devices are used in an appropriate manner, especially in situations where the device is provided by a party other than the actual user. Much work which has been done on runtime verification for mobile devices and operating systems is mostly application-centric, resulting in global, device-centri...

Distribution of class ii major histocompatibility complex antigenexpressing cells in human dental pulp with carious lesions

Directory of Open Access Journals (Sweden)

Tetiana Haniastuti

2012-09-01

antigen-antigen permukaan sel. Sel-sel yang mengekspresikan molekul-molekul ini berpartisipasi dalam pengenalan awal substansi-substansi antigenik untuk selanjutnya diproses dan dipresentasikan pada permukaan sel. Tujuan: Penelitian ini bertujuan untuk mengetahui perubahan distribusi sel-sel yang mengekspresikan molekul MHC kelas II pada pulpa gigi manusia dengan meningkatnya keparahan karies. Metode: Penelitian ini menggunakan 15 gigi molar ketiga yang mengalami karies pada permukaan oklusal dengan berbagai tingkat kedalaman dan 5 gigi molar ketiga normal (tidak mengalami karies. Sebelum didekalsifikasi dengan larutan EDTA 10% (pH 7,4, seluruh sampel diamati dengan menggunakan micro-computed tomography untuk mengetahui kedalaman lesi karies secara tiga dimensi. Spesimen kemudian diproses untuk dilakukan cryosection dan dilakukan immunohistokimia dengan menggunakan monoklonal antibodi anti MHC kelas II. Hasil: Ekspresi MHC kelas II oleh sel-sel pada ruang pulpa dijumpai disemua spesimen baik pada kondisi normal maupun karies. Pada gigi normal, sel-sel yang mengekspresikan MHC kelas II terletak terutama pada tepi pulpa. Pada gigi-geligi yang mengalami karies, agregasi sel-sel yang mengekspresikan MHC kelas II terutama terletak di bawah lesi karies. Semakin dalam lesi karies, jumlah sel-sel yang mengekspresikan MHC kelas II semakin meningkat. Kesimpulan: Kedalaman lesi karies berpengaruh terhadap distribusi sel-sel yang mengekspresikan MHC kelas II pada pulpa.

Diffusion, electrical mobility and ionic interactions in molten Salts; Diffusion, mobilite electrique et interactions ioniques dans les sels fondus

Energy Technology Data Exchange (ETDEWEB)

Lantelme, F. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-05-01

The diffusion and the electrical migration of ions in the molten alkali nitrates LiNO{sub 3}, NaNO{sub 3} and KNO{sub 3} and in their mixtures have been examined using stable or radio-active isotope indicators. This experimental works shows that there are large differences in the diffusion coefficients and the electric mobilities when they are compared using the Nernst-Einstein formula. An interpretive model has been put forward which shows the role played by poly-ionic displacements: in a salt AC the particles moving are not only the free ions A{sup -} and C{sup +} but also the groups [A{sub n}C{sub m}]{sup (m-n)+}... These results confirm the importance of electrostatic attraction and of the polarizability of the ions. This mechanisms, furthermore, explains the inversions of electrical mobilities often observed in liquid ionic media. (author) [French] La diffusion et la migration electrique des ions dans les nitrates alcalins fondus LiNO{sub 3}, NaNO{sub 3} et KNO{sub 3} et dans leurs melanges ont ete examinees a l'aide d'indicateurs isotopiques stables et radioactifs. Cette etude experimentale fait apparaitre des ecarts importants entre les coefficients de diffusion et les mobilites electriques compares au moyen de la formule de Nernst-Einstein. Un modele d'interpretation a pu etre propose mettant en evidence l'existence de deplacements polyioniques: dans un sel AC les particules en mouvement sont non seulement les ions libres A{sup -} et C{sup +} mais aussi des groupes [A{sub n}C{sub m}]{sup (}m{sup -n)+}. Ces resultats precisent l'importance des attractions electro-statiques et de la polarisabilite des ions. D'autre part, ce mecanisme permet de rendre compte des renversements des mobilites electriques souvent observes en milieu ionique liquide.

Diffusion, electrical mobility and ionic interactions in molten Salts; Diffusion, mobilite electrique et interactions ioniques dans les sels fondus

Energy Technology Data Exchange (ETDEWEB)

Lantelme, F [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-05-01

The diffusion and the electrical migration of ions in the molten alkali nitrates LiNO{sub 3}, NaNO{sub 3} and KNO{sub 3} and in their mixtures have been examined using stable or radio-active isotope indicators. This experimental works shows that there are large differences in the diffusion coefficients and the electric mobilities when they are compared using the Nernst-Einstein formula. An interpretive model has been put forward which shows the role played by poly-ionic displacements: in a salt AC the particles moving are not only the free ions A{sup -} and C{sup +} but also the groups [A{sub n}C{sub m}]{sup (m-n)+}... These results confirm the importance of electrostatic attraction and of the polarizability of the ions. This mechanisms, furthermore, explains the inversions of electrical mobilities often observed in liquid ionic media. (author) [French] La diffusion et la migration electrique des ions dans les nitrates alcalins fondus LiNO{sub 3}, NaNO{sub 3} et KNO{sub 3} et dans leurs melanges ont ete examinees a l'aide d'indicateurs isotopiques stables et radioactifs. Cette etude experimentale fait apparaitre des ecarts importants entre les coefficients de diffusion et les mobilites electriques compares au moyen de la formule de Nernst-Einstein. Un modele d'interpretation a pu etre propose mettant en evidence l'existence de deplacements polyioniques: dans un sel AC les particules en mouvement sont non seulement les ions libres A{sup -} et C{sup +} mais aussi des groupes [A{sub n}C{sub m}]{sup (}m{sup -n)+}. Ces resultats precisent l'importance des attractions electro-statiques et de la polarisabilite des ions. D'autre part, ce mecanisme permet de rendre compte des renversements des mobilites electriques souvent observes en milieu ionique liquide.

Application of Polynomial Neural Networks to Classification of Acoustic Warfare Signals

Science.gov (United States)

1993-04-01

PNNTrain - PNN Trainer (command line version) [sect. 2.4.2] LookClass - Examines ". sel4 " exemplar files [sect. 2.4.3] ChangeClass - Edits ". sel4 " exemplar...accumulated in the local trining file). Use the file selection window to go to the directoriesI where the raw exemplar data (*. sel4 files) are stored...the exemplar files to the training database. UNIX wildcard characters may be used for convenience. For example, you may type "PNNTrain p*. sel4 " to

PRODUKSI DAN KANDUNGAN NUTRISI Spirulina fusiformis YANG DIKULTUR DENGAN PENCAHAYAAN MONOKROMATIS LIGHT EMITTING DIODES (LEDs

Directory of Open Access Journals (Sweden)

Muhammad Firdaus

2015-06-01

yang bersumber dari LED dengan cahaya monokromatis merah (M, biru (B, dan biru-merah (BM, serta cahaya dari lampu fluoresens sebagai kontrol (K. Puncak kepadatan sel terjadi pada hari ke-18 dengan kepadatan masing-masing sebanyak 5,56 x 104 sel/mL (M; 1,65 x 104 sel/mL (B; 4,15 x 104 sel/mL (BM; dan 4,56 x 104 sel/mL (K. Perlakuan pencahayaan LED dengan cahaya monokromatis merah mencapai biomassa panen tertinggi sebesar 3,91 mg/mL dengan kandungan protein 49,77%; lemak 19,61%; karbohidrat 6,15%; serat kasar 0,00%; dan abu 24,48%. Pencahayaan dengan LED merah berpotensi diaplikasikan sebagai sumber cahaya dalam produksi Spirulina.

Changes and challenges in the Software Engineering Laboratory

Science.gov (United States)

Pajerski, Rose

1994-01-01

Since 1976, the Software Engineering Laboratory (SEL) has been dedicated to understanding and improving the way in which one NASA organization, the Flight Dynamics Division (FDD), develops, maintains, and manages complex flight dynamics systems. The SEL is composed of three member organizations: NASA/GSFC, the University of Maryland, and Computer Sciences Corporation. During the past 18 years, the SEL's overall goal has remained the same: to improve the FDD's software products and processes in a measured manner. This requires that each development and maintenance effort be viewed, in part, as a SEL experiment which examines a specific technology or builds a model of interest for use on subsequent efforts. The SEL has undertaken many technology studies while developing operational support systems for numerous NASA spacecraft missions.

Social and Emotional Learning Policies and Physical Education

Science.gov (United States)

Jacobs, Jenn; Wright, Paul

2014-01-01

There is a current push to broaden the educational agenda by integrating social and emotional learning (SEL) competencies into the academic curriculum. This article describes how physical education (PE) provides a strong platform for integrating SEL standards into the curriculum. The alignment between SEL and the affective learning objectives of…

What's Happening in the Software Engineering Laboratory?

Science.gov (United States)

Pajerski, Rose; Green, Scott; Smith, Donald

1995-01-01

Since 1976 the Software Engineering Laboratory (SEL) has been dedicated to understanding and improving the way in which one NASA organization the Flight Dynamics Division (FDD) at Goddard Space Flight Center, develops, maintains, and manages complex flight dynamics systems. This paper presents an overview of recent activities and studies in SEL, using as a framework the SEL's organizational goals and experience based software improvement approach. It focuses on two SEL experience areas : (1) the evolution of the measurement program and (2) an analysis of three generations of Cleanroom experiments.

Radiation Hardened NULL Convention Logic Asynchronous Circuit Design

Directory of Open Access Journals (Sweden)

Liang Zhou

2015-10-01

Full Text Available This paper proposes a radiation hardened NULL Convention Logic (NCL architecture that can recover from a single event latchup (SEL or single event upset (SEU fault without deadlock or any data loss. The proposed architecture is analytically proved to be SEL resistant, and by extension, proved to be SEU resistant. The SEL/SEU resistant version of a 3-stage full-word pipelined NCL 4 × 4 unsigned multiplier was implemented using the IBM cmrf8sf 130 nm 1.2 V process at the transistor level and simulated exhaustively with SEL fault injection to validate the proposed architectures. Compared with the original version, the SEL/SEU resilient version has 1.31× speed overhead, 2.74× area overhead, and 2.79× energy per operation overhead.

The impact of enhancing students' social and emotional learning: a meta-analysis of school-based universal interventions.

Science.gov (United States)

Durlak, Joseph A; Weissberg, Roger P; Dymnicki, Allison B; Taylor, Rebecca D; Schellinger, Kriston B

2011-01-01

This article presents findings from a meta-analysis of 213 school-based, universal social and emotional learning (SEL) programs involving 270,034 kindergarten through high school students. Compared to controls, SEL participants demonstrated significantly improved social and emotional skills, attitudes, behavior, and academic performance that reflected an 11-percentile-point gain in achievement. School teaching staff successfully conducted SEL programs. The use of 4 recommended practices for developing skills and the presence of implementation problems moderated program outcomes. The findings add to the growing empirical evidence regarding the positive impact of SEL programs. Policy makers, educators, and the public can contribute to healthy development of children by supporting the incorporation of evidence-based SEL programming into standard educational practice. © 2011 The Authors. Child Development © 2011 Society for Research in Child Development, Inc.

Ontology-Based Device Descriptions and Device Repository for Building Automation Devices

Directory of Open Access Journals (Sweden)

Dibowski Henrik

2011-01-01

Full Text Available Device descriptions play an important role in the design and commissioning of modern building automation systems and help reducing the design time and costs. However, all established device descriptions are specialized for certain purposes and suffer from several weaknesses. This hinders a further design automation, which is strongly needed for the more and more complex building automation systems. To overcome these problems, this paper presents novel Ontology-based Device Descriptions (ODDs along with a layered ontology architecture, a specific ontology view approach with virtual properties, a generic access interface, a triple store-based database backend, and a generic search mask GUI with underlying query generation algorithm. It enables a formal, unified, and extensible specification of building automation devices, ensures their comparability, and facilitates a computer-enabled retrieval, selection, and interoperability evaluation, which is essential for an automated design. The scalability of the approach to several ten thousand devices is demonstrated.

Zinc-Laccase Biofuel Cell

Directory of Open Access Journals (Sweden)

Abdul Aziz Ahmad

2011-12-01

Full Text Available A zinc-laccase biofuel cell adapting the zinc-air cell design features is investigated. A simple cell design configuration is employed: a membraneless single chamber and a freely suspended laccase in a quasi-neutral buffer electrolyte. The cell is characterised according to its open-circuit voltage, polarization profile, power density plot and discharge capacity at constant current. The biocatalytic role of laccase is evident from the polarization profile and power output plot. Performance comparison between a single chamber and dual chamber cell design is also presented. The biofuel cell possessed an open-circuit voltage of 1.2 V and delivered a maximum power density of 0.9 mW/cm2 at current density of 2.5 mA/cm2. These characteristics are comparable to biofuel cell utilising a much more complex system design.KEY WORDS (keyword:  Biofuel cell, Bioelectrochemical cell, Zinc anode, Laccase and Oxidoreductase.ABSTRAK: Sel bio-bahan api zink-laccase dengan adaptasi daripada ciri-ciri rekabentuk sel zink-udara telah dikaji. Sel dengan konfigurasi rekabentuk yang mudah digunapakai: ruangan tunggal tanpa membran dan laccase diampaikan secara bebas di dalam elektrolit pemampan quasi-neutral. Sel dicirikan berdasarkan voltan litar terbuka, profil polarisasi, plot ketumpatan kuasa dan kapasiti discas pada arus malar. Peranan laccase sebagai bio-pemangkin adalah amat ketara daripada profil polarisasi dan plot ketumpatan kuasa. Perbandingan prestasi di antara sel dengan rekabentuk ruangan tunggal and dwi-ruangan turut diketengahkan. Seperti dijangkakan, sel dengan rekabentuk ruangan tunggal menunjukkan kuasa keluaran yang lebih rendah jika dibandingkan dengan rekabentuk dwi-ruangan kemungkinan disebabkan fenomena cas bocor. Sel bio-bahan api ini mempunyai voltan litar terbuka 1.2 V dan memberikan ketumpatan kuasa maksima 0.9 mW/cm2 pada ketumpatan arus 2.5 mA/cm2. Ciri-ciri ini adalah sebanding dengan sel bio-bahan api yang menggunapakai rekabentuk sel

Microbeam mapping of single event latchups and single event upsets in CMOS SRAMs

International Nuclear Information System (INIS)

Barak, J.; Adler, E.; Fischer, B.E.; Schloegl, M.; Metzger, S.

1998-01-01

The first simultaneous microbeam mapping of single event upset (SEU) and latchup (SEL) in the CMOS RAM HM65162 is presented. The authors found that the shapes of the sensitive areas depend on V DD , on the ions being used and on the site on the chip being hit by the ion. In particular, they found SEL sensitive sites close to the main power supply lines between the memory-bit-arrays by detecting the accompanying current surge. All these SELs were also accompanied by bit-flips elsewhere in the memory (which they call indirect SEUs in contrast to the well known SEUs induced in the hit memory cell only). When identical SEL sensitive sites were hit farther away from the supply lines only indirect SEL sensitive sites could be detected. They interpret these events as latent latchups in contrast to the classical ones detected by their induced current surge. These latent SELs were probably decoupled from the main supply lines by the high resistivity of the local supply lines

Multi-Device to Multi-Device (MD2MD Content-Centric Networking Based on Multi-RAT Device

Directory of Open Access Journals (Sweden)

Cheolhoon Kim

2017-11-01

Full Text Available This paper proposes a method whereby a device can transmit and receive information using a beacon, and also describes application scenarios for the proposed method. In a multi-device to multi-device (MD2MD content-centric networking (CCN environment, the main issue involves searching for and connecting to nearby devices. However, if a device can’t find another device that satisfies its requirements, the connection is delayed due to the repetition of processes. It is possible to rapidly connect to a device without repetition through the selection of the optimal device using the proposed method. Consequently, the proposed method and scenarios are advantageous in that they enable efficient content identification and delivery in a content-centric Internet of Things (IoT environment, in which multiple mobile devices coexist.

Graphene device and method of using graphene device

Science.gov (United States)

Bouchiat, Vincent; Girit, Caglar; Kessler, Brian; Zettl, Alexander K.

2015-08-11

An embodiment of a graphene device includes a layered structure, first and second electrodes, and a dopant island. The layered structure includes a conductive layer, an insulating layer, and a graphene layer. The electrodes are coupled to the graphene layer. The dopant island is coupled to an exposed surface of the graphene layer between the electrodes. An embodiment of a method of using a graphene device includes providing the graphene device. A voltage is applied to the conductive layer of the graphene device. Another embodiment of a method of using a graphene device includes providing the graphene device without the dopant island. A dopant island is placed on an exposed surface of the graphene layer between the electrodes. A voltage is applied to the conductive layer of the graphene device. A response of the dopant island to the voltage is observed.

Humanitarian Use Devices/Humanitarian Device Exemptions in cardiovascular medicine.

Science.gov (United States)

Kaplan, Aaron V; Harvey, Elisa D; Kuntz, Richard E; Shiran, Hadas; Robb, John F; Fitzgerald, Peter

2005-11-01

The Second Dartmouth Device Development Symposium held in October 2004 brought together leaders from the medical device community, including clinical investigators, senior representatives from the US Food and Drug Administration, large and small device manufacturers, and representatives from the financial community to examine difficult issues confronting device development. The role of the Humanitarian Use Device/Humanitarian Device Exemption (HUD/HDE) pathway in the development of new cardiovascular devices was discussed in this forum. The HUD/HDE pathway was created by Congress to facilitate the availability of medical devices for "orphan" indications, ie, those affecting HDEs have been granted (23 devices, 6 diagnostic tests). As the costs to gain regulatory approval for commonly used devices increase, companies often seek alternative ways to gain market access, including the HUD/HDE pathway. For a given device, there may be multiple legitimate and distinct indications, including indications that meet the HUD criteria. Companies must choose how and when to pursue each of these indications. The consensus of symposium participants was for the HUD/HDE pathway to be reserved for true orphan indications and not be viewed strategically as part of the clinical development plan to access a large market.

Prognostic effect of symptomatic extracranial lesions on survival of recursive partitioning analysis Class III brain metastatic patients treated with stereotactic radiotherapy

Directory of Open Access Journals (Sweden)

Xiu-Jun Chen

2016-01-01

Conclusion: The presence of SELs was a negative prognosis factor for the survival of RPA Class III brain metastatic patients. If RPA Class III brain metastatic patients were without SELs, SRT may be a reasonable treatment option, but if they had SELs, SRT may not be a reasonable treatment due to the short overall survival time and KDT.

Establishing Systemic Social and Emotional Learning Approaches in Schools: A Framework for Schoolwide Implementation

Science.gov (United States)

Oberle, Eva; Domitrovich, Celene E.; Meyers, Duncan C.; Weissberg, Roger P.

2016-01-01

Social and emotional learning (SEL) is a fundamental part of education. Incorporating high-quality SEL programming into day-to-day classroom and school practices has emerged as a main goal for many practitioners over the past decade. The present article overviews the current state of SEL research and practice, with a particular focus on the United…

ALAT SOLAR TRACKER BERBASIS MIKROKONTROLER 8 BIT ATMega8535

Directory of Open Access Journals (Sweden)

I Wayan Sutaya

2015-07-01

Full Text Available Penelitian yang telah dilakukan ini adalah membuat prototipe alat solar tracker. Alat ini berfungsi untuk menggerakkan modul sel surya sehingga permukaan sel surya bisa terkena sinar matahari secara maksimal. Saat ini sel surya di Indonesia banyak terpasang secara statis atau tidak dilengkapi alat solar tracker sehingga energi matahari tidak diterima secara maksimal. Hal ini menyebabkan sel surya yang terpasang di beberapa daerah di Indonesia tidak memberikan manfaat yang optimal. Alat solar tracker yang dihasilkan pada penelitian ini diharapkan sebagai solusi dari permasalahan yang ada saat ini. Mikrokontroler 8 bit ATMega8535 yang digunakan sebagai otak utama dari alat solar tracker menjadikan alat ini menjadi berbiaya murah. Serta teknik memprogram dengan bahasa assembly menjadikan alat ini tahan terhadap kegagalan sistem. Solar tracker ini sudah bisa beroperasi dengan baik dan cocok digunakan pada modul sel surya berukuran kecil.

Manajemen Sumber Daya Teknologi Informasi Laboratorium Komputer Menggunakan Balanced Scorecard (BSC dan COBIT 5

Directory of Open Access Journals (Sweden)

M. Panji Ismail

2017-05-01

Full Text Available Laboratorium komputer merupakan salah satu sarana pembelajaran yang berbasis Teknologi Informasi (TI yang terdiri dari tiga sumber daya TI, yaitu software, hardware, dan brainware. Tidak adanya kesesuaian antara kemampuan hardware dengan spesifikasi hardware yang digunakan dapat menghambat pengguna (brainware dalam melakukan praktikum dan pembelajaran di laboratorium. Selain itu, ketidaksesuaian tersebut juga mengakibatkan software berjalan lambat dan computer sering error sehingga praktikum menjadi terganggu dan berjalan tidak lancar. Untuk mengetahui kesesuaian antar sumber daya TI yang ada di laboratorium dibutuhkan proses pengukuran manajemen sumber daya TI yang ada saat ini. Skala likert menjadi salah satu metode untuk mengukur kinerja software, hardware, dan tata kelola laboratorium saat ini. Hasil pengukuran kemudian dievaluasi menggunakan framework Balance Scorecard (BSC dengan melalui beberapa tahapan dan penyelarasan strategi TI. Setelah mengetahui hasil evaluasi dan kendala-kendala apa saka yang ada dalam melakukan pengelolaan maka langkah berikutnya adalah menentukan bagaimana cara memperbaiki dan melakukan peningkatan tata kelola TI. COBIT 5 akan menjadi framework pelengkap untuk memperbaiki sekaligus memprediksi pengembangan manajemen sumber daya TI. Hasil penelitian ini menunjukkan bahwa integrase antara COBIT 5 dengan Balance Scorecard (BSC memberikan kemampuan dalam melakukan pengukuran tata kelola laboratorium serta memberikan kemampuan untuk meningkatkan pelayanan secara kontinyu.

PENGEMBANGAN PENGENDALIAN KELEMBABAN, TEMPERATUR PADA RUMAH KACA DENGAN PENCATATAN DATA OTOMATIS

Directory of Open Access Journals (Sweden)

Faisal Faisal

2016-02-01

Full Text Available Penelitian pengembangan pengendalian kelembaban pada rumah kaca telah selesai dilakukan. Pengembangan alat ini terdiri atas pengukuran kelembaban, temperatur dan intensitas cahaya dan pengendalian kelembaban udara. Sistem alat ukur terdiri dari power supply DC, sensor SHT11, sensor LDR, relay, mikrokontroler ATMega8535, pengkodisi sinyal, LCD karakter 20x2 dan humidifier. Sensor SHT11 terkalibrasi secara digital melalui port B. Sensor LDR dikarakterisasi menggunakan lampu pijar di dalam chamber tidak tembus cahaya, sehingga menghasilkan persamaan karakteristik sensor v = 0,7595ln(I – 2,2484 volt. Persamaan karakterisasi tersebut diproses melalui program BASCOM AVR untuk mengisi perintah pada mikrokontroler ATMega8535 dalam proses pengukuran secara terus menerus dan menampilkannya pada LCD karakter 20x2 dalam satuan lux dan data disimpan dalam file dengan format *xlsx. Humidifier dihidupkan oleh relay yang dikendalikan oleh mikrokontroler ATMega8535 dengan set poin pengukuran kelembaban udara kurang dari 60%. Rumah kaca yang digunakan berukuran panjang 240 cm, lebar 150 cm, tinggi dinding 200 cm dan tinggi atap 50 cm. Uji pengendalian kelembaban udara berhasil dipertahankan pada kelembaban udara kisaran 60% dengan error rata-rata sebesar 1,9% dari pukul 11.00 WITA sampai dengan 16.00 WITA.

PERBEDAAN TINGKAT STRES LUTUNG JAWA (Trachypitecus auratus PADA KANDANG PERAWATAN DAN KANDANG KARANTINA DI JAVAN LANGUR CENTER (JLC DITINJAU DARI KADAR KORTISOL DAN RASIO NEUTROFIL PERLIMFOSIT (N/L

Directory of Open Access Journals (Sweden)

Eko Dini Danafi

2017-11-01

Full Text Available Lutung Jawa (Trachypithecus auratus adalah satwa endemik Jawa dan Bali. Populasi lutung Jawa semakin mengalami penurunan dan masuk kategori satwa yang dilindungi. Penurunan populasi lutung jawa dapat disebabkan oleh berbagai macam penyakit yang diperparah dengan tingginya tingkat stres pada satwa. Javan Langur Center yang berlokasi di Cangar, Batu merupakan salah satu tempat untuk merehabilitasi lutung Jawa sebelum dilepasliarkan ke alam. Javan Langur Center terdiri dari tiga kandang yaitu kandang perawatan, kandang karantina dan kandang sosialisasi. Respon stress pada primata dapat dievaluasi dengan menggunakan indikator pengukuran hormon kortisol dan rasio neutrofil per limfosit. Penelitian bertujuan untuk mengetahui perbedaan kadar kortisol dan rasio neutrofil per limfosit sebagai indikator stres pada lutung Jawa di kandang perawatan dengan kandang karantina. Lutung Jawa dengan umur 2-7,5 tahun dan berjenis kelamin jantan dan betina. Pengukuran kadar kortisol dengan metode ELISA Indirect gelombang pada 450 nm dan diferensial leukosit diukur dengan hematology analizer. Hasil penelitian menunjukkan bahwa sampel pada kandang perawatan memiliki rata-rata kadar kortisol yang lebih tinggi (116,1 ng/mL daripada kandang karantina (87,5 ng/mL, dan pengukuran rasio N/L pada kandang perawatan lebih tinggi (11,3 daripada kandang karantina (1,2.

Characterization of mammalian selenoprotein o: a redox-active mitochondrial protein.

Science.gov (United States)

Han, Seong-Jeong; Lee, Byung Cheon; Yim, Sun Hee; Gladyshev, Vadim N; Lee, Seung-Rock

2014-01-01

Selenoproteins exhibit diverse biological functions, most of which are associated with redox control. However, the functions of approximately half of mammalian selenoproteins are not known. One such protein is Selenoprotein O (SelO), the largest mammalian selenoprotein with orthologs found in a wide range of organisms, including bacteria and yeast. Here, we report characterization of mammalian SelO. Expression of this protein could be verified in HEK 293T cells by metabolic labeling of cells with 75Se, and it was abolished when selenocysteine was replaced with serine. A CxxU motif was identified in the C-terminal region of SelO. This protein was reversibly oxidized in a time- and concentration-dependent manner in HEK 293T cells when cells were treated with hydrogen peroxide. This treatment led to the formation of a transient 88 kDa SelO-containing complex. The formation of this complex was enhanced by replacing the CxxU motif with SxxC, but abolished when it was replaced with SxxS, suggesting a redox interaction of SelO with another protein through its Sec residue. SelO was localized to mitochondria and expressed across mouse tissues. Its expression was little affected by selenium deficiency, suggesting it has a high priority for selenium supply. Taken together, these results show that SelO is a redox-active mitochondrial selenoprotein.

Characterization of mammalian selenoprotein o: a redox-active mitochondrial protein.

Directory of Open Access Journals (Sweden)

Seong-Jeong Han

Full Text Available Selenoproteins exhibit diverse biological functions, most of which are associated with redox control. However, the functions of approximately half of mammalian selenoproteins are not known. One such protein is Selenoprotein O (SelO, the largest mammalian selenoprotein with orthologs found in a wide range of organisms, including bacteria and yeast. Here, we report characterization of mammalian SelO. Expression of this protein could be verified in HEK 293T cells by metabolic labeling of cells with 75Se, and it was abolished when selenocysteine was replaced with serine. A CxxU motif was identified in the C-terminal region of SelO. This protein was reversibly oxidized in a time- and concentration-dependent manner in HEK 293T cells when cells were treated with hydrogen peroxide. This treatment led to the formation of a transient 88 kDa SelO-containing complex. The formation of this complex was enhanced by replacing the CxxU motif with SxxC, but abolished when it was replaced with SxxS, suggesting a redox interaction of SelO with another protein through its Sec residue. SelO was localized to mitochondria and expressed across mouse tissues. Its expression was little affected by selenium deficiency, suggesting it has a high priority for selenium supply. Taken together, these results show that SelO is a redox-active mitochondrial selenoprotein.

KULTUR MIKROALGA Haematococcus pluvialis UNTUK MENGHASILKAN ASTAXANTIN

Directory of Open Access Journals (Sweden)

Ahmad Muzaki

2008-12-01

Full Text Available Mikroalga merupakan sumberdaya biologis yang eksklusif dan berperan sangat luas untuk aplikasi penyedia komponen bernilai tinggi di bidang perikanan dalam rangka peningkatan ekonomi. Tujuan riset ini adalah mendapatkan teknik pengkulturan Haematococcus pluvialis dan teknik stimulasi melalui penyinaran sel untuk menghasilkan produk astaxantin. Media tumbuh Bold (PIV metal dan modifikasi Bold (Clewat-32 diujikan untuk pengkulturan. Pengkulturan juga diterapkan dengan menggunakan 6 jenis air tawar dari sumber berbeda (mata air alam, sumur artesis, air mineral kemasan I, air mineral kemasan II, air sumur, dan air PAM. Efek stres dilakukan melalui penyinaran dengan UV selama 3 jam dan inkubasi lanjutan dengan menggunakan penyinaran intensitas cahaya tinggi untuk mendapatkan sel merah yang mengandung astaxantin. Hasil yang diperoleh menunjukkan bahwa pertumbuhan sel H. pluvialis pada media Bold (PIV metal lebih baik (55 x 104 sel/mL dan air tawar yang berasal dari mata air alam menghasilkan kepadatan sel lebih tinggi (166 x 104 sel/mL pada hari ke-5 dan 245 x104 sel/mL pada hari ke-13 dibandingkan air dari sumber lainnya. Penyinaran UV dan dilanjutkan dengan penyinaran intensitas cahaya tinggi mempercepat perubahan warna sel dan produksi metabolit sekunder sebagai astaxantin. Microalgae are exclusive biological resources to provide valuable compounds in fisheries. The purpose of the research was to evaluate culture technique of H. pluvialis and stimulation technique through UV irradiation to produce astaxanthin. Growth media of Bold (PIV metal and Bold (clewat-32 modifications were tested to culture microalgae. Other culture technique applied by using 6 fresh water from various sources (natural fresh water, deep well water, mineral water I, mineral water II, well water, and municipal water supply sample. Stress effects were tested by using UV irradiation for 3 hours and incubation with high light intensity to find red cells containing astaxanthin

DeviceNet-based device-level control in SSRF

CERN Document Server

Leng Yong Bin; Lu Cheng Meng; Miao Hai Feng; Liu Song Qiang; Shen Guo Bao

2002-01-01

The control system of Shanghai Synchrotron Radiation Facility is an EPICS-based distributed system. One of the key techniques to construct the system is the device-level control. The author describes the design and implementation of the DeviceNet-based device controller. A prototype of the device controller was tested in the experiments of magnet power supply and the result showed a precision of 3 x 10 sup - sup 5

Quantification of physical activity using the QAPACE Questionnaire: a two stage cluster sample design survey of children and adolescents attending urban school.

Science.gov (United States)

Barbosa, Nicolas; Sanchez, Carlos E; Patino, Efrain; Lozano, Benigno; Thalabard, Jean C; LE Bozec, Serge; Rieu, Michel

2016-05-01

Quantification of physical activity as energy expenditure is important since youth for the prevention of chronic non communicable diseases in adulthood. It is necessary to quantify physical activity expressed in daily energy expenditure (DEE) in school children and adolescents between 8-16 years, by age, gender and socioeconomic level (SEL) in Bogotá. This is a Two Stage Cluster Survey Sample. From a universe of 4700 schools and 760000 students from three existing socioeconomic levels in Bogotá (low, medium and high). The random sample was 20 schools and 1840 students (904 boys and 936 girls). Foreshadowing desertion of participants and inconsistency in the questionnaire responses, the sample size was increased. Thus, 6 individuals of each gender for each of the nine age groups were selected, resulting in a total sample of 2160 individuals. Selected students filled the QAPACE questionnaire under supervision. The data was analyzed comparing means with multivariate general linear model. Fixed factors used were: gender (boys and girls), age (8 to 16 years old) and tri-strata SEL (low, medium and high); as independent variables were assessed: height, weight, leisure time, expressed in hours/day and dependent variable: daily energy expenditure DEE (kJ.kg-1.day-1): during leisure time (DEE-LT), during school time (DEE-ST), during vacation time (DEE-VT), and total mean DEE per year (DEEm-TY) RESULTS: Differences in DEE by gender, in boys, LT and all DEE, with the SEL all variables were significant; but age-SEL was only significant in DEE-VT. In girls, with the SEL all variables were significant. The post hoc multiple comparisons tests were significant with age using Fisher's Least Significant Difference (LSD) test in all variables. For both genders and for all SELs the values in girls had the higher value except SEL high (5-6) The boys have higher values in DEE-LT, DEE-ST, DEE-VT; except in DEEm-TY in SEL (5-6) In SEL (5-6) all DEEs for both genders are highest. For SEL

Identification and characterization of a selenoprotein family containing a diselenide bond in a redox motif

Science.gov (United States)

Shchedrina, Valentina A.; Novoselov, Sergey V.; Malinouski, Mikalai Yu.; Gladyshev, Vadim N.

2007-01-01

Selenocysteine (Sec, U) insertion into proteins is directed by translational recoding of specific UGA codons located upstream of a stem-loop structure known as Sec insertion sequence (SECIS) element. Selenoproteins with known functions are oxidoreductases containing a single redox-active Sec in their active sites. In this work, we identified a family of selenoproteins, designated SelL, containing two Sec separated by two other residues to form a UxxU motif. SelL proteins show an unusual occurrence, being present in diverse aquatic organisms, including fish, invertebrates, and marine bacteria. Both eukaryotic and bacterial SelL genes use single SECIS elements for insertion of two Sec. In eukaryotes, the SECIS is located in the 3′ UTR, whereas the bacterial SelL SECIS is within a coding region and positioned at a distance that supports the insertion of either of the two Sec or both of these residues. SelL proteins possess a thioredoxin-like fold wherein the UxxU motif corresponds to the catalytic CxxC motif in thioredoxins, suggesting a redox function of SelL proteins. Distantly related SelL-like proteins were also identified in a variety of organisms that had either one or both Sec replaced with Cys. Danio rerio SelL, transiently expressed in mammalian cells, incorporated two Sec and localized to the cytosol. In these cells, it occurred in an oxidized form and was not reducible by DTT. In a bacterial expression system, we directly demonstrated the formation of a diselenide bond between the two Sec, establishing it as the first diselenide bond found in a natural protein. PMID:17715293

[Enterotoxin genes occurance among S. aureus strains isolated from inpatients and carriers].

Science.gov (United States)

Lawrynowicz-Paciorek, Maja; Kochman, Maria; Piekarska, Katarzyna; Wyrebiak, Agata; Potracka, Ewa; Leniak-Chmiel, Urszula; Magdziak, Agnieszka

2006-01-01

We examined 44 inpatients and 66 carriers Staphylococcus aureus strains, isolated in years 2002-2005, for the presence of 18 enterotoxin genes (se/sel) (by PCR), the ability for A-D enterotoxin production (by SET-RPLA) and antibiotic resistance distribution (by disc diffusion method). se/sel genes were detected in 90,9% of all strains, sea (70,5%) and selk and selq (52,3%) - among inpatients strains and egc (65,2%) - among carriers strains were the most frequently se/sel genes found. Positive results of SET-RPLA were consistent with PCR results. There was no correlation observed between antibiotic resistance and se/sel genes distribution among tested S. aureus strains.

Perbedaan Kadar Calprotectin Sebelum Dan Sesudah Radioterapi Pada Pasien Karsinoma Nasofaring Akibat Infeksi Epstein-Barr Virus

Directory of Open Access Journals (Sweden)

Rurie Ratna Shantiningsih

2016-11-01

Full Text Available Latar belakang: Epstein-Barr Virus (EBV adalah anggota herpes virus berkaitan dengan etiologi karsinoma nasofaring (KNF. Pada pasien KNF jumlah monosit dalam sel darah tepi mengalami penurunan dan kebanyakan masih dalam bentuk immature sehingga menurunkan respon imun pasien serta meningkatkan kemungkinan terjadinya penyakit periodontal. Radioterapi merupakan salah satu metode terapi yang banyak digunakan untuk kasus KNF. Calprotectin diproduksi dalam sitoplasma sel monosit dan levelnya meningkat pada beberapa penyakit inflamasi, termasuk inflamasi jaringan periodontal, ditandai dengan peningkatan kadar calprotectin pada cairan sulkus gingiva (CSG. Tujuan: mengkaji perbedaan kadar calprotectin pada pasien KNF sebelum dan setelah dilakukan radioterapi, pada sel monosit, serum dan CSG. Metode Penelitian: sepuluh pasien KNF akibat infeksi EBV digunakan sebagai subjek dalam penelitian ini. Lima orang sebagai sampel kelompok sebelum radioterapi dan 5 orang sebagai sampel kelompok sesudah radioterapi. Dari masing-masing pasien diambil sel monosit dan serum darah tepi serta CSG. Kadar calprotectin diukur menggunakan metode ELISA. Hasil: kadar calprotectin pada kelompok sampel sebelum radioterapi lebih rendah dibandingkan kelompok sam pel sesudah radioterapi dilihat melalui sel monosit dan serum darah tepi. Sementara dari CSG, kadar calprotectin kelompok sampel sebelum radioterapi nampak lebih tinggi dibanding kelompok sesudah radioterapi. Hasil analisis statistik Anova menunjukkan perbedaan yang signifikan (p<0,05. Kesimpulan: terdapat perbedaan kadar calprotectin pada sel monosit, serum darah tepi dan CSG pasien KNF antara sebelum dan sesudah radioterapi. Pada sel monosit dan serum darah tepi, terjadi penurunan kadar calprotectin, sementara pada CSG terjadi peningkatan kadar calprotectin antara sebelum dan sesudah radioterapi.

QoE-Aware Device-to-Device Multimedia Communications

Directory of Open Access Journals (Sweden)

Liang ZHOU

2015-08-01

Full Text Available Multimedia services over mobile device-to-device (D2D networks has recently received considerable attention. In this scenario, each device is equipped with a cellular communication interface, as well as a D2D interface over a shared medium. In this work, we study the performance properties of the mobile D2D communications in the framework of user satisfaction, and develop a fully distributed QoE-aware multimedia communication scheme (QAMCS. Specifically, we translate the opportunistic multimedia communications issue into a stochastic optimization problem, which opens up a new degree of performance to exploit. Moreover, QAMCS is designed for a heterogeneous and dynamic environment, in which user demand, device mobility, and transmission fashion may vary across different devices and applications. Importantly, QAMCS is able to maximize the user satisfaction and only needs each device to implement its own scheme individually in the absence of a central controller.

Virtual MIMO Beamforming and Device Pairing Enabled by Device-to-Device Communications for Multidevice Networks

Directory of Open Access Journals (Sweden)

Yeonjin Jeong

2017-01-01

Full Text Available We consider a multidevice network with asymmetric antenna configurations which supports not only communications between an access point and devices but also device-to-device (D2D communications for the Internet of things. For the network, we propose the transmit and receive beamforming with the channel state information (CSI for virtual multiple-input multiple-output (MIMO enabled by D2D receive cooperation. We analyze the sum rate achieved by a device pair in the proposed method and identify the strategies to improve the sum rate of the device pair. We next present a distributed algorithm and its equivalent algorithm for device pairing to maximize the throughput of the multidevice network. Simulation results confirm the advantages of the transmit CSI and D2D cooperation as well as the validity of the distributive algorithm.

Release strategies for making transferable semiconductor structures, devices and device components

Science.gov (United States)

Rogers, John A; Nuzzo, Ralph G; Meitl, Matthew; Ko, Heung Cho; Yoon, Jongseung; Menard, Etienne; Baca, Alfred J

2014-11-25

Provided are methods for making a device or device component by providing a multilayer structure having a plurality of functional layers and a plurality of release layers and releasing the functional layers from the multilayer structure by separating one or more of the release layers to generate a plurality of transferable structures. The transferable structures are printed onto a device substrate or device component supported by a device substrate. The methods and systems provide means for making high-quality and low-cost photovoltaic devices, transferable semiconductor structures, (opto-)electronic devices and device components.

Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture

Science.gov (United States)

McCown, Steven H [Rigby, ID; Derr, Kurt W [Idaho Falls, ID; Rohde, Kenneth W [Idaho Falls, ID

2012-05-08

Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture are described. According to one embodiment, a wireless device monitoring method includes accessing device configuration information of a wireless device present at a secure area, wherein the device configuration information comprises information regarding a configuration of the wireless device, accessing stored information corresponding to the wireless device, wherein the stored information comprises information regarding the configuration of the wireless device, comparing the device configuration information with the stored information, and indicating the wireless device as one of authorized and unauthorized for presence at the secure area using the comparing.

Spent nuclear fuel project cold vacuum drying facility safety equipment list

International Nuclear Information System (INIS)

IRWIN, J.J.

1999-01-01

This document provides the safety equipment list (SEL) for the Cold Vacuum Drying Facility (CVDF). The SEL was prepared in accordance with the procedure for safety structures, systems, and components (SSCs) in HNF-PRO-516, ''Safety Structures, Systems, and Components,'' Revision 0 and HNF-PRO-097, Engineering Design and Evaluation, Revision 0. The SEL was developed in conjunction with HNF-SO-SNF-SAR-O02, Safety Analysis Report for the Cold Vacuum Drying Facility, Phase 2, Supporting Installation of Processing Systems (Garvin 1998). The SEL identifies the SSCs and their safety functions, the design basis accidents for which they are required to perform, the design criteria, codes and standards, and quality assurance requirements that are required for establishing the safety design basis of the SSCs. This SEL has been developed for the CVDF Phase 2 Safety Analysis Report (SAR) and shall be updated, expanded, and revised in accordance with future phases of the CVDF SAR until the CVDF final SAR is approved

GAMETOPHYTES OF THE BIRD NEST FERN Asplenium nidus L. (ASPLENIACEAE FROM WEST KALIMANTAN

Directory of Open Access Journals (Sweden)

Titien Ng. Praptosuwiryo

2010-01-01

Full Text Available Gametofit Asplenium nidus L dari Kalimantan Barat diamati dengan mengecambahkan spora pada media campuran akar paku pohon dan arang sekam (1:1. Penelitian ini bertujuan untuk mendapatkan bukti taksonomi baru untuk mendukung keberadaan jenis komplek dalam A. nidus. Spora coklat tua simetris bilateral yang berkecambah menghasilkan benang berklorofil yang terdiri atas 4-6 sel. Rizoid berkecambah pada sisi polar, sedangkan benang berklorofil pada sisi ekuator. Pembentukan piringan berawal pada sel sub terminal dari benang yang berkecambah pada hari ke-12 dengan pembelahan sel secara mencong. Rizoid terbentuk lagi pada sel-sel pangkal atau semi pangkal pada piringan. Gametofit muda berbentuk jantung panjang dan anteridium muda mulai timbul pada umur 60 hari. Gametofit dewasa menjantung dan menghasilkan anteridium dewasa mulai umur 75 hari. Gametofit hermaprodit dan betina tidak ditemukan. Sporofit muda mulai muncul pada umur 90 hari. Hasil penelitian menunjukkan bahwa ciri-ciri morfologi gametofit menambah bukti taksonomi dalam mendukung keberadaan jenis komplek atau jenis tersembunyi dalam A. nidus.

Class 1 devices case studies in medical devices design

CERN Document Server

Ogrodnik, Peter J

2014-01-01

The Case Studies in Medical Devices Design series consists of practical, applied case studies relating to medical device design in industry. These titles complement Ogrodnik's Medical Device Design and will assist engineers with applying the theory in practice. The case studies presented directly relate to Class I, Class IIa, Class IIb and Class III medical devices. Designers and companies who wish to extend their knowledge in a specific discipline related to their respective class of operation will find any or all of these titles a great addition to their library. Class 1 Devices is a companion text to Medical Devices Design: Innovation from Concept to Market. The intention of this book, and its sister books in the series, is to support the concepts presented in Medical Devices Design through case studies. In the context of this book the case studies consider Class I (EU) and 510(k) exempt (FDA) . This book covers classifications, the conceptual and embodiment phase, plus design from idea to PDS. These title...

Single-Event Latchup Testing of the Micrel MIC4424 Dual Power MOSFET Driver

Science.gov (United States)

Pellish, J. A.; Boutte, A.; Kim, H.; Phan, A.; Topper, A.

2016-01-01

We conducted 47 exposures of four different MIC4424 devices and did not observe any SEL or high-current events. This included worst-case conditions with a LET of 81 MeV-sq cm/mg, applied voltage of 18.5 V, a case temperature greater than 120 C, and a final fluence of 1x10(exp 7)/sq cm. We also monitored both the outputs for the presence of SETs. While the period of the 1 MHz square wave was slightly altered in some cases, no pulses were added or deleted. 1. Purpose: The purpose of this testing is to characterize the BiCMOS/DMOS Micrel MIC4424 dual, non-inverting MOSFET driver for single-event latchup (SEL) susceptibility. These data will be used for flight lot evaluation purposes. 2. Devices Tested: The MIC4423/4424/4425 family are highly reliable BiCMOS/DMOS buffer/driver MOSFET drivers. They are higher output current versions of the MIC4426/4427/4428. They can survive up to 5V of noise spiking, of either polarity, on the ground pin. They can accept, without either damage or logic upset, up to half an amp of reverse current (either polarity) forced back into their outputs. Primarily intended for driving power MOSFETs, the MIC4423/4424/4425 drivers are suitable for driving other loads (capacitive, resistive, or inductive) which require low-impedance, high peak currents, and fast switching times. Heavily loaded clock lines, coaxial cables, or piezoelectric transducers are some examples. The only known limitation on loading is that total power dissipated in the driver must be kept within the maximum power dissipation limits of the package. Five (5) parts were provided for SEL testing. We prepared four parts for irradiation and reserved one piece as an un-irradiated control. More information about the devices can be found in Table 1. The parts were prepared for testing by removing the lid from the CDIP package to expose the target die. The parts were then soldered to small copper circuit adapter boards for easy handling. These parts are fabricated in a bulk Bi

The Description Of 1 Liter Of Tears Written By Aya Kito

OpenAIRE

Yendie, Rizka

2011-01-01

Tulisan ini membahas arti dari judul novel 1 liter of Tears. Novel ini dibuat berdasarkan diary sang penulis Aya Kito dalam berjuang melawan penyakit yang tidak ada obatnya yaitu Spinocerebellar Ataxia (SCA), penyakit yang menyerang sel-sel penopang sel saraf. Awalnya penderita merasakan tubuhnya melemah. Berangsur-angsur kemampuan motorik penderita menurun. Sampai-sampai Aya-chan mengalami kesulitan menelan makanan, berbicara dan bahkan tersenyum. Aya-chan mulai merasakan gejala penyakit...

Closing the loop on improvement: Packaging experience in the Software Engineering Laboratory

Science.gov (United States)

Waligora, Sharon R.; Landis, Linda C.; Doland, Jerry T.

1994-01-01

As part of its award-winning software process improvement program, the Software Engineering Laboratory (SEL) has developed an effective method for packaging organizational best practices based on real project experience into useful handbooks and training courses. This paper shares the SEL's experience over the past 12 years creating and updating software process handbooks and training courses. It provides cost models and guidelines for successful experience packaging derived from SEL experience.

Long-term seizure, cognitive, and psychiatric outcome following trans-middle temporal gyrus amygdalohippocampectomy and standard temporal lobectomy.

Science.gov (United States)

Bujarski, Krzysztof A; Hirashima, Fuyuki; Roberts, David W; Jobst, Barbara C; Gilbert, Karen L; Roth, Robert M; Flashman, Laura A; McDonald, Brenna C; Saykin, Andrew J; Scott, Rod C; Dinnerstein, Eric; Preston, Julie; Williamson, Peter D; Thadani, Vijay M

2013-07-01

Previous comparisons of standard temporal lobectomy (STL) and selective amygdalohippocampectomy (SelAH) have been limited by inadequate long-term follow-up, variable definitions of favorable outcome, and inadequate consideration of psychiatric comorbidities. The authors performed a retrospective analysis of seizure, cognitive, and psychiatric outcomes in a noncontemporaneous cohort of 69 patients with unilateral refractory temporal lobe epilepsy and MRI evidence of mesial temporal sclerosis after either an STL or an SelAH and examined seizure, cognitive, and psychiatric outcomes. The mean duration of follow-up for STL was 9.7 years (range 1-18 years), and for trans-middle temporal gyrus SelAH (mtg-SelAH) it was 6.85 years (range 1-15 years). There was no significant difference in seizure outcome when "favorable" was defined as time to loss of Engel Class I or II status; better seizure outcome was seen in the STL group when "favorable" was defined as time to loss of Engel Class IA status (p=0.034). Further analysis revealed a higher occurrence of seizures solely during attempted medication withdrawal in the mtg-SelAH group than in the STL group (p=0.016). The authors found no significant difference in the effect of surgery type on any cognitive and most psychiatric variables. Standard temporal lobectomy was associated with significantly higher scores on assessment of postsurgical paranoia (p=0.048). Overall, few differences in seizure, cognitive, and psychiatric outcome were found between STL and mtg-SelAH on long-term follow-up. Longer exposure to medication side effects after mtg-SelAH may adversely affect quality of life but is unlikely to cause additional functional impairment. In patients with high levels of presurgical psychiatric disease, mtg-SelAH may be the preferred surgery type.

Plutonium extraction by the formation of insoluble salts (1960); Extraction du plutonium par formation de sels insolubles (1960)

Energy Technology Data Exchange (ETDEWEB)

Ganivet, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1960-06-15

The aim of this work is to convert Pu IV nitrate in solution into an insoluble salt. Three methods have been studied: 1) the conventional oxalic acid method was improved; 2) precipitation with 8-hydroxyquinoline was tried; 3) the hydrogen peroxide method was adapted to the eluates of the ionic resins from Marcoule. The yield from the oxalic process has been increased (loss of Pu in the mother-liquor brought from 200 mg/l to 20 mg/l). The study of Pu IV precipitation by 8-hydroxyquinoline has shown that the yield is excellent (Pu concentration in the mother-liquor less than 5 mg/h), but decontamination from impurities is nil. Finally, experiments on the precipitation by hydrogen peroxide of Pu IV solutions at the concentrations normally obtained from the anionic resins at Marcoule have given us good yields (Pu concentration in the mother-liquor less than 7 mg/l), and the purification is better than that obtained by oxalic acid (1000 ppm total impurities after a precipitation). (author) [French] L'objet de l'etude est la transformation en sel insoluble du nitrate de Pu IV en solution. Trois procedes ont ete etudies: 1) la methode classique a l'acide oxalique a ete amelioree, 2) la precipitation a la 8-hydroxyquinoleine a ete essayee; 3) le procede a l'eau oxygenee a ete adapte aux solutions d'elution des resines anion de Marcoule. Le rendement du procede oxalique a ete augmente (perte en Pu dans les eaux-meres ramenee de 200 mg/l a 20 mg/l). L'etude de la precipitation du Pu IV par la 8-hydroxyquinoleine a montre que le rendement etait excellent (concentration du Pu dans les eaux-meres inferieure a 5 mg/l), mais la decontamination en impuretes est nulle. Enfin, l'etude et l'application de la precipitation par l'eau oxygenee de solutions de Pu IV de concentrations habituellement obtenues a la sortie des resines anion a Marcoule nous ont permis d'obtenir un bon rendement (concentration de Pu dans les eaux-meres inferieure a 7 mg/l); la purification est meilleure que

MONTAGE: A Methodology for Designing Composable End-to-End Secure Distributed Systems

Science.gov (United States)

2012-08-01

and verification, from PSOS [NF03] to the recent seL4 [KEH+09]. While they make considerable progress toward high-assurance OS, these works are not...of the specification itself. Examples include the seL4 microkernel work by Klein et al. [KEH+09], which presents the experience of formally proving...David Cock, Philip Derrin, Dhammika Elkaduwe, Kai Engelhardt, Rafal Kolanski, Michael Norrish, Thomas Sewell, Harvey Tuch, and Simon Winwood. sel4

ANALISIS PARAMETER JARINGAN HSDPA KONDISI INDOOR DENGAN TEMS INVESTIGATION DAN G-NETTRACK PRO

Directory of Open Access Journals (Sweden)

Dewa Made Mahendra Yudha

2016-03-01

Full Text Available Penggunaan teknologi dalam sistem komunikasi bergerak sudah berkembang cukup pesat. Salah satu contohnya ada teknologi HSDPA. Pihak provider biasanya melakukan metode walk test untuk mengecek kekuatan sinyal dengan menggunakan software TEMS Investigtions. Dengan kemajuannya Teknologi walk test dapat diterapkan dengan lebih mudah yaitu menggunakan perangkat android yang sudah terinstal aplikasi G-Net track Pro. Pada penelitian ini, akan menggunakan tahapan sesuai alur yang ada pada metode penelitian yaitu dimulai dengan melakukan pengukuran berdasarkan jarak dengan membandingkan software TEMS Investigations dan G-NET TRACK PRO dengan parameter RSCP dan Ec/No. Setelah dilakukan pengukuran kemudian akan dilanjutkan dengan menganalisa antara hubungan parameter RSCP dan Ec/No menggunakan TEMS Investigations dan G-Net Pro. kemudian dilanjutkan menggunakan perhitungan teoritis parameter RSCP. Dari hasil pengukuran diproleh pada lantai I antena 1-1 pada titik jarak 5 meter parameter RSCP dengan TEMS Investigation memiliki nilai -75 dBm sedangkan dari G-Net Track Pro memiliki nilai -83 dBm. Pada parameter Ec/No dengan TEMS Investigation memiliki nilai -6 dB dan G_Net Track memiliki nilai -5 dB. Dapat disimpulkan bahwa aplikasi G-NetTrack Pro mampu menampilkan parameter yang dibutuhkan akan tetapi tidak sedetail TEMS investigation sehingga untuk proses pembelajaran dan pengenalan walk test aplikasi G-Net track Pro dapat digunakan.

In Situ Electron Microscopy of Lactomicroselenium Particles in Probiotic Bacteria

Directory of Open Access Journals (Sweden)

Gabor Nagy

2016-06-01

Full Text Available Electron microscopy was used to test whether or not (a in statu nascendi synthesized, and in situ measured, nanoparticle size does not differ significantly from the size of nanoparticles after their purification; and (b the generation of selenium is detrimental to the bacterial strains that produce them. Elemental nano-sized selenium produced by probiotic latic acid bacteria was used as a lactomicroselenium (lactomicroSel inhibitor of cell growth in the presence of lactomicroSel, and was followed by time-lapse microscopy. The size of lactomicroSel produced by probiotic bacteria was measured in situ and after isolation and purification. For these measurements the TESLA BS 540 transmission electron microscope was converted from analog (aTEM to digital processing (dTEM, and further to remote-access internet electron microscopy (iTEM. Lactobacillus acidophilus produced fewer, but larger, lactomicroSel nanoparticles (200–350 nm than Lactobacillus casei (L. casei, which generated many, smaller lactomicroSel particles (85–200 nm and grains as a cloudy, less electrodense material. Streptococcus thermophilus cells generated selenoparticles (60–280 nm in a suicidic manner. The size determined in situ in lactic acid bacteria was significantly lower than those measured by scanning electron microscopy after the isolation of lactomicroSel particles obtained from lactobacilli (100–500 nm, but higher relative to those isolated from Streptococcus thermopilus (50–100 nm. These differences indicate that smaller lactomicroSel particles could be more toxic to the producing bacteria themselves and discrepancies in size could have implications with respect to the applications of selenium nanoparticles as prebiotics.

Pengukuran Jarak Berbasiskan Stereo Vision

Directory of Open Access Journals (Sweden)

Iman Herwidiana Kartowisastro

2010-12-01

Full Text Available Measuring distance from an object can be conducted in a variety of ways, including by making use of distance measuring sensors such as ultrasonic sensors, or using the approach based vision system. This last mode has advantages in terms of flexibility, namely a monitored object has relatively no restrictions characteristic of the materials used at the same time it also has its own difficulties associated with object orientation and state of the room where the object is located. To overcome this problem, so this study examines the possibility of using stereo vision to measure the distance to an object. The system was developed starting from image extraction, information extraction characteristics of the objects contained in the image and visual distance measurement process with 2 separate cameras placed in a distance of 70 cm. The measurement object can be in the range of 50 cm - 130 cm with a percentage error of 5:53%. Lighting conditions (homogeneity and intensity has a great influence on the accuracy of the measurement results. 

Pengukuran Kinerja Dengan Balanced Scorecard

Directory of Open Access Journals (Sweden)

Ita Mariza

2003-09-01

Full Text Available Performance of the company influenced by two factors, internal factors (controllable factors and external factors (uncontrollable factors. From the internal factors itself consist of  two parts, from managerial skills and financial side. The external factors are politic condition, economics condition, culture, social, etc. To survive in the market the company have to have the competitive advantage, it can be mangerial skills or financial side. So, to improve our ability or advantage or strength, we have to know first the performance of the current condition. There are four perspective in the Balanced scorecard to measure the performance,  financial perspective, customers perspective, internal business, and learning and growth. In this article, will be discuss about the controllable factors only and with Balanced scorecard to measure the performance  of the company.

Pengukuran Kinerja Dengan Balanced Scorecard

OpenAIRE

Ita Mariza

2003-01-01

Performance of the company influenced by two factors, internal factors (controllable factors) and external factors (uncontrollable factors). From the internal factors itself consist of  two parts, from managerial skills and financial side. The external factors are politic condition, economics condition, culture, social, etc. To survive in the market the company have to have the competitive advantage, it can be mangerial skills or financial side. So, to improve our ability or advantage or stre...

PLASMA DEVICE

Science.gov (United States)

Gow, J.D.; Wilcox, J.M.

1961-12-26

A device is designed for producing and confining highenergy plasma from which neutrons are generated in copious quantities. A rotating sheath of electrons is established in a radial electric field and axial magnetic field produced within the device. The electron sheath serves as a strong ionizing medium to gas introdueed thereto and also functions as an extremely effective heating mechanism to the resulting plasma. In addition, improved confinement of the plasma is obtained by ring magnetic mirror fields produced at the ends of the device. Such ring mirror fields are defined by the magnetic field lines at the ends of the device diverging radially outward from the axis of the device and thereafter converging at spatial annular surfaces disposed concentrically thereabout. (AFC)

Practical microwave electron devices

CERN Document Server

Meurant, Gerard

2013-01-01

Practical Microwave Electron Devices provides an understanding of microwave electron devices and their applications. All areas of microwave electron devices are covered. These include microwave solid-state devices, including popular microwave transistors and both passive and active diodes; quantum electron devices; thermionic devices (including relativistic thermionic devices); and ferrimagnetic electron devices. The design of each of these devices is discussed as well as their applications, including oscillation, amplification, switching, modulation, demodulation, and parametric interactions.

Medical Devices; General Hospital and Personal Use Devices; Classification of the Ultraviolet Radiation Chamber Disinfection Device. Final order.

Science.gov (United States)

2015-11-20

The Food and Drug Administration (FDA or the Agency) is classifying the ultraviolet (UV) radiation chamber disinfection device into class II (special controls). The special controls that will apply to the device are identified in this order and will be part of the codified language for the UV radiation chamber disinfection device classification. The Agency is classifying the device into class II (special controls) in order to provide a reasonable assurance of safety and effectiveness of the device.

Photovoltaic device

Energy Technology Data Exchange (ETDEWEB)

Reese, Jason A; Keenihan, James R; Gaston, Ryan S; Kauffmann, Keith L; Langmaid, Joseph A; Lopez, Leonardo; Maak, Kevin D; Mills, Michael E; Ramesh, Narayan; Teli, Samar R

2017-03-21

The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

Photovoltaic device

Science.gov (United States)

Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

2015-06-02

The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

Formal System Verification - Extension 2

Science.gov (United States)

2012-08-08

vision of truly trustworthy systems has been to provide a formally verified microkernel basis. We have previously developed the seL4 microkernel...together with a formal proof (in the theorem prover Isabelle/HOL) of its functional correctness [6]. This means that all the behaviours of the seL4 C...source code are included in the high-level, formal specification of the kernel. This work enabled us to provide further formal guarantees about seL4 , in

An overview of the Software Engineering Laboratory

Science.gov (United States)

1994-01-01

This report describes the background and structure of the SEL organization, the SEL process improvement approach, and its experimentation and data collection process. Results of some sample SEL studies are included. It includes a discussion of the overall implication of trends observed over 17 years of process improvement efforts and looks at the return on investment based on a comparison of total investment in process improvement with the measurable improvements seen in the organization's software product.

High voltage semiconductor devices and methods of making the devices

Energy Technology Data Exchange (ETDEWEB)

Matocha, Kevin; Chatty, Kiran; Banerjee, Sujit

2018-01-23

A multi-cell MOSFET device including a MOSFET cell with an integrated Schottky diode is provided. The MOSFET includes n-type source regions formed in p-type well regions which are formed in an n-type drift layer. A p-type body contact region is formed on the periphery of the MOSFET. The source metallization of the device forms a Schottky contact with an n-type semiconductor region adjacent the p-type body contact region of the device. Vias can be formed through a dielectric material covering the source ohmic contacts and/or Schottky region of the device and the source metallization can be formed in the vias. The n-type semiconductor region forming the Schottky contact and/or the n-type source regions can be a single continuous region or a plurality of discontinuous regions alternating with discontinuous p-type body contact regions. The device can be a SiC device. Methods of making the device are also provided.

Detecting early response to cyclophosphamide treatment of RIF-1 tumors using selective multiple quantum spectroscopy (SelMQC) and dynamic contrast enhanced imaging.

Science.gov (United States)

Poptani, Harish; Bansal, Navin; Graham, Robert A; Mancuso, Anthony; Nelson, David S; Glickson, Jerry D

2003-04-01

The purpose of this study was to develop a reliable, noninvasive method for early detection of tumor response to therapy that would facilitate optimization of treatment regimens to the needs of the individual patient. In the present study, the effects of cyclophosphamide (Cp, a widely used alkylating agent) were monitored in a murine radiation induced fibrosarcoma (RIF-1) using in vivo (1)H NMR spectroscopy and imaging to evaluate the potential of these techniques towards early detection of treatment response. Steady-state lactate levels and Gd-DTPA uptake kinetics were measured using selective multiple quantum coherence (Sel-MQC) transfer spectroscopy and dynamic contrast enhanced imaging, respectively in RIF-1 tumors before, 24 and 72 h after 300 mg/kg of Cp administration. High-resolution (1)H NMR spectra of perchloric acid extracts of the tumor were correlated with lactate and glucose concentrations determined enzymatically. In vivo NMR experiments showed a decrease in steady-state lactate to water ratios (5.4 +/- 1.6 to 0.6 +/- 0.5, p < 0.05) and an increase in Gd-DTPA uptake kinetics following treatment response. The data indicate that decreases in lactate result from decreased glycolytic metabolism and an increase in tumor perfusion/permeability. Perchloric acid extracts confirmed the lower lactate levels seen in vivo in treated tumors and also indicated a higher glycerophosphocholine/phosphocholine (GPC/PC) integrated intensity ratio (1.39 +/- 0.09 vs 0.97 +/- 0.04, p < 0.01), indicative of increased membrane degradation following Cp treatment. Steady-state lactate levels provide metabolic information that correlates with changes in tumor physiology measured by Gd-DTPA uptake kinetics with high spatial and temporal resolution. Both of these parameters may be useful for monitoring early tumor response to therapy. Copyright 2003 John Wiley & Sons, Ltd.

Process control device

International Nuclear Information System (INIS)

Hayashi, Toshifumi; Kobayashi, Hiroshi.

1994-01-01

A process control device comprises a memory device for memorizing a plant operation target, a plant state or a state of equipments related with each other as control data, a read-only memory device for storing programs, a plant instrumentation control device or other process control devices, an input/output device for performing input/output with an operator, and a processing device which conducts processing in accordance with the program and sends a control demand or a display demand to the input/output device. The program reads out control data relative to a predetermined operation target, compares and verify them with actual values to read out control data to be a practice premise condition which is further to be a practice premise condition if necessary, thereby automatically controlling the plant or requiring or displaying input. Practice presuming conditions for the operation target can be examined succesively in accordance with the program without constituting complicated logical figures and AND/OR graphs. (N.H.)

Collected software engineering papers, volume 9

Science.gov (United States)

1991-01-01

This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from November 1990 through October 1991. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. This is the ninth such volume of technical papers produced by the SEL. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. For the convenience of this presentation, the eight papers contained here are grouped into three major categories: (1) software models studies; (2) software measurement studies; and (3) Ada technology studies. The first category presents studies on reuse models, including a software reuse model applied to maintenance and a model for an organization to support software reuse. The second category includes experimental research methods and software measurement techniques. The third category presents object-oriented approaches using Ada and object-oriented features proposed for Ada. The SEL is actively working to understand and improve the software development process at GSFC.

Korelasi antara dimensi vertikal oklusi dengan panjang jari kelingking pada sub-ras Deutro Melayu

Directory of Open Access Journals (Sweden)

Cytha Nilam Chairani

2016-12-01

Full Text Available Correlation between VDO with length of little finger in Malay Deutro sub race. The correct determination of vertical dimension of occlusion (VDO is an important step to to concern for dentist in clinical procedures of dental treatment. VDO is defined as the distance between two selected anatomic points, one point on maxilla and the other on mandibule in centric occlusion. There are various measurements of VDO methods suggested. Recently, many researchers have been studied antropometric method to determine the VDO. One of the antropometric methods is the length of little finger measurement. VDO and length of little finger are influenced by human race and each race has different specific characteristic. This study choose Malay Deutro sub race as one of sub-races in Indonesia. The purpose of this study is to determine the correlation between measurement of DVO and length of little finger of Malay Deutro sub race in Padang. This study use observational analysis with cross sectional approach. The samples consist of 56 males and 56 females, 112 respondents in total. The respondents are Malay Deutro sub race that domicile in Padang and are eligible. The data were analyzed by Pearson correlation test. VDO and length of little finger of Mal ay Deutro sub race was significantly correlated (r value= 0,768 and the result of VDO was almost equal with length of little fi nger (p value= 0,000 that means statistically significant. The Antropometric parameter measurement of the length of little finger can be used in determination of VDO.   ABSTRAK Penentuan dimensi vertikal oklusi (DVO yang tepat merupakan salah satu faktor penting yang perlu diperhatikan dokter gigi dalam prosedur klinis perawatan gigi. DVO adalah jarak antara dua titik anatomi yang dipilih, yaitu satu titik pada maksila dan satu titik pada mandibula ketika posisi oklusi sentrik. Beberapa metode dianjurkan dalam pengukuran DVO. Salah satu metode penentuan DVO yang dikembangkan oleh para ahli

Hip supporting device

DEFF Research Database (Denmark)

2011-01-01

The present invention relates to a device for limiting movements in one or more anatomical joints, such as a device for limiting movement in the human hip joint after hip replacement surgery. This is provided by a device for limiting movement in the human hip joint, said device comprising: at least...

Cooling device in thermonuclear device

International Nuclear Information System (INIS)

Honda, Tsutomu.

1988-01-01

Purpose: To prevent loss of cooling effect over the entire torus structure directly after accidental toubles in a cooling device of a thermonuclear device. Constitution: Coolant recycling means of a cooling device comprises two systems, which are alternately connected with in-flow pipeways and exit pipeways of adjacent modules. The modules are cooled by way of the in-flow pipeways and the exist pipeways connected to the respective modules by means of the coolant recycling means corresponding to the respective modules. So long as one of the coolant recycling means is kept operative, since every one other modules of the torus structure is still kept cooled, the heat generated from the module put therebetween, for which the coolant recycling is interrupted, is removed by means of heat conduction or radiation from the module for which the cooling is kept continued. No back-up emergency cooling system is required and it can provide high economic reliability. (Kamimura, M.)

Concentrate supplementation strategies in ryegrass pasture for productive performance in lambs

International Nuclear Information System (INIS)

Santos, S.K.; Falbo, M.K.; Sandini, I.E.; Pacentchuk, F.; Neumann, M.; Garbossa, G.

2018-01-01

This study evaluated the effect of two concentrate supplementation strategies on performance, metabolic profile and economic evaluation of suckling lambs and ewes in ryegrass (Lolium multiflorum) pasture. Twenty-seven ewes and 45 lambs were divided into three groups: (1) ryegrass pasture without supplementation - control (CON); (2) CON plus supplemented ewes and lambs at 1% of live weight (SEL), and (3) CON plus creep feeding supplemented lambs at 1% of live weight (CSL). Concentrate use increased (p<0.05) average daily gain (ADG) by 19.95% over CON (21.6 and 18.3% for SEL and CSL, respectively). Concentrate use contributed to minimizing forage quality fluctuation and provided greater ADG stability, mainly when ryegrass nutritional content and digestibility decreased. Blood metabolites profiles did not differ between groups, with exception of phosphorus which was higher for CON than SEL, and calcium which was higher for CSL than CON (p<0.05). Compared to CON, stoking rate values were greater to SEL (p<0.05). Compared to CSL, ewe and total stocking rate were greater (p<0.05) to SEL. Considering the control group as break even feed investment, SEL strategy had a positive economic return, while CSL showed economic losses. Concentrate use increased ADG of lambs and decrease the impact of nutrient quality changes of forage on daily gains, but must be considered that supplemental strategy used could affect negatively economic return.

Photovoltaic device

Science.gov (United States)

Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

2015-09-01

The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device (10) with a multilayered photovoltaic cell assembly (100) and a body portion (200) joined at an interface region (410) and including an intermediate layer (500), at least one interconnecting structural member (1500), relieving feature (2500), unique component geometry, or any combination thereof.

78 FR 68714 - Medical Devices; Ophthalmic Devices; Classification of the Scleral Plug

Science.gov (United States)

2013-11-15

... amendments), as ``preamendments devices.'' FDA classifies these devices after the Agency takes the following.... FDA-2012-N-1238] Medical Devices; Ophthalmic Devices; Classification of the Scleral Plug AGENCY: Food... scleral plugs in order to provide a reasonable assurance of safety and effectiveness of the device. The...

21 CFR 864.9195 - Blood mixing devices and blood weighing devices.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Blood mixing devices and blood weighing devices. 864.9195 Section 864.9195 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Products Used In Establishments That...

Process improvement as an investment: Measuring its worth

Science.gov (United States)

Mcgarry, Frank; Jeletic, Kellyann

1993-01-01

This paper discusses return on investment (ROI) generated from software process improvement programs. It details the steps needed to compute ROI and compares these steps from the perspective of two process improvement approaches: the widely known Software Engineering Institute's capability maturity model and the approach employed by NASA's Software Engineering Laboratory (SEL). The paper then describes the specific investments made in the SEL over the past 18 years and discusses the improvements gained from this investment by the production organization in the SEL.

From a Proven Correct Microkernel to Trustworthy Large Systems

Science.gov (United States)

Andronick, June

The seL4 microkernel was the world's first general-purpose operating system kernel with a formal, machine-checked proof of correctness. The next big step in the challenge of building truly trustworthy systems is to provide a framework for developing secure systems on top of seL4. This paper first gives an overview of seL4's correctness proof, together with its main implications and assumptions, and then describes our approach to provide formal security guarantees for large, complex systems.

Verified OS Interface Code Synthesis

Science.gov (United States)

2016-12-01

results into the larger proof framework of the seL4 microkernel to be directly usable in practice. Beyond the stated project goals, the solution...CakeML, can now also be used in the Isabelle/HOL system that was used for the verified seL4 microkernel. This combination increases proof productivity...were used for the verified ML compiler CakeML, can now also be used in the Isabelle/HOL system that was used for the verified seL4 microkernel. This

GEEC All the Way Down

Science.gov (United States)

2015-01-13

applying formal methods to systems software, e.g., IronClad [16] and seL4 [19], promise that this vision is not a fool’s er- rand after all. In this...kernel seL4 [19] is fully verified for functional correct- ness and it runs with other deprivileged services. How- ever, the verification process used...portion, which is non-trivial for theorem proving-based approaches. In our COSS example, adding the trusted network logging extensions to seL4 will

Sealing device

Science.gov (United States)

Garcia-Crespo, Andres Jose

2013-12-10

A sealing device for sealing a gap between a dovetail of a bucket assembly and a rotor wheel is disclosed. The sealing device includes a cover plate configured to cover the gap and a retention member protruding from the cover plate and configured to engage the dovetail. The sealing device provides a seal against the gap when the bucket assemply is subjected to a centrifugal force.

Microfluidic Device

Science.gov (United States)

Tai, Yu-Chong (Inventor); Zheng, Siyang (Inventor); Lin, Jeffrey Chun-Hui (Inventor); Kasdan, Harvey L. (Inventor)

2017-01-01

Described herein are particular embodiments relating to a microfluidic device that may be utilized for cell sensing, counting, and/or sorting. Particular aspects relate to a microfabricated device that is capable of differentiating single cell types from dense cell populations. One particular embodiment relates a device and methods of using the same for sensing, counting, and/or sorting leukocytes from whole, undiluted blood samples.

STUDI TENTANG PERSEPSI DAN TINGKAT PARTISIPASI PETANI PENGGARAP DI HUTAN PENELITIAN PARUNGPANJANG

Directory of Open Access Journals (Sweden)

NFN Desmiwati

2016-12-01

Full Text Available Penelitian ini bertujuan untuk menganalisis persepsi dan tingkat partisipasi petani penggarap dalam pengelolaan Hutan Penelitian (HP Parungpanjang yang selama ini telah berjalan. Studi ini diharapkan dapat memberikan bahan informasi dan masukan bagi perumusan strategi dan arah kebijakan pengelolaan HP Parungpanjang secara berkelanjutan agar terpenuhinya aspek pemberdayaan bagi petani penggarap dan keamanan hutan penelitian. Metode penelitian yang digunakan adalah analisis deskriptif, data dikumpulkan melalui survey, diskusi kelompok terfokus, wawancara semi terstruktur, observasi, catatan lapangan dan dokumentasi. Pengukuran persepsi menggunakan Skala Likert dan pengukuran tingkat partisipasi menggunakan derajat tangga Arnstein. Hasil penelitian menunjukkan bahwa persepsi petani penggarap terhadap pengelolaan HP Parungpanjang sangat baik namun tingkat partisipasi petani penggarapnya berada pada level terapi yang berarti pengelolaan HP Parungpanjang dalam hal pelibatan petani penggarap masih bersifat non-partisipatif.

PROFIL RESISTIVITAS 2D PADA GUA BAWAH TANAH DENGAN METODE GEOLISTRIK KONFIGURASI WENNER-SCHLUMBERGER (STUDI KASUS GUA DAGO PAKAR, BANDUNG

Directory of Open Access Journals (Sweden)

Nanang Dwi Ardi

2015-01-01

Full Text Available Makalah ini menampilkan sebuah pendekatan dalam penyelidikan rongga-rongga di bawah tanah. Akuisisi data resistivitas telah dilakukan di Gua Dago Pakar, Bandung. Lintasan resistivitas telah diukur dan dilanjutkan dengan pengukuran secara manual dengan menggunakan tali serta GPS untuk memperkirakan bentuk gua secara akurat. Sistem konfigurasi lintasan resistivitas menggunakan konfigurasi elektroda WennerSchlumberger. Pemrosesan dan pemodelan data menggunakan perangkat lunak Res2DInv dengan metode komputasi kuadrat terkecil. Hasil dari pemodelan inverse 2D menunjukkan bahwa bentuk tubuh gua berlokasi sekitar 10 – 12,4 m di bawah lintasan resistivitas dengan rentang nilai resistivitas 540-600 Ohm meter. Hasil ini dikorelasikan dengan data geologi dan pengukuran secara manual di dalam gua. Kata kunci:  Rongga, Resistivitas, Wenner-Schlumberger, Inversi

The Sortie-Generation Model System. Volume 5. Maintenance Subsystem

Science.gov (United States)

1981-09-01

05 D-S-T-E-KEY-3 PIC X. 15290 05 D-S-T-E-KEY-4 PIc X. 15300 05 FILLER PIG X(5) 15310 03 FILLER PIG: X VALUE SPACE.15320 03 D-S-T-E- LINKI PIG 9(6...TT 1’NAL SThATE 00~ * rENT. 2c24-:0 MOVE E;EL-TAB-1-INK1 (RPT-START) TO 203S50 SEL-TAB- LINKI (SEL-TA-:-SS) 20඄ MOVE RPT-IDl-C3-SS: TO SRPT- 1D-SO 20... LINKI fSRD-St’l TO SEL TBSS 23� I E-TABm-KEY- 1-NUNt- fSEL-TAB--) 240 RPT- ID-REPORT-CLASS (RPT- ID-SS) 441?-0GO TO SRDP-EX I!T. 232:4 50 * IONORE

Secure Control Systems for the Energy Sector

Energy Technology Data Exchange (ETDEWEB)

Smith, Rhett [Schweitzer Engineering Lab., Inc., Alpharetta, GA (United States); Stewart, John [Tennessee Valley Authority, Knoxville, TN (United States); Chavez, Adrian [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-10-22

The Padlock Project is an alliance between Tennessee Valley Authority (TVA), Sandia National Laboratories (SNL), and Schweitzer Engineering Laboratories Inc. (SEL). SEL is the prime contractor on the Padlock project. Rhett Smith (SEL) is the project director and Adrian Chaves (SNL) and John Stewart (TVA) are principle investigators. SEL is the world’s leader in microprocessor-based electronic equipment for protecting electric power systems. The Tennessee Valley Authority, a corporation owned by the U.S. government, provides electricity for 9 million people in parts of seven southeastern states at prices below the national average. TVA, which receives no taxpayer money and makes no profits, also provides flood control, navigation and land management for the Tennessee River system and assists utilities, and state and local governments with economic development.

Collected software engineering papers, volume 8

Science.gov (United States)

1990-01-01

A collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) during the period November 1989 through October 1990 is presented. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. Additional information about the SEL and its research efforts may be obtained from the sources listed in the bibliography. The seven presented papers are grouped into four major categories: (1) experimental research and evaluation of software measurement; (2) studies on models for software reuse; (3) a software tool evaluation; and (4) Ada technology and studies in the areas of reuse and specification.

Collected Software Engineering Papers, Volume 10

Science.gov (United States)

1992-01-01

This document is a collection of selected technical papers produced by participants in the Software Engineering Laboratory (SEL) from Oct. 1991 - Nov. 1992. The purpose of the document is to make available, in one reference, some results of SEL research that originally appeared in a number of different forums. Although these papers cover several topics related to software engineering, they do not encompass the entire scope of SEL activities and interests. Additional information about the SEL and its research efforts may be obtained from the sources listed in the bibliography at the end of this document. For the convenience of this presentation, the 11 papers contained here are grouped into 5 major sections: (1) the Software Engineering Laboratory; (2) software tools studies; (3) software models studies; (4) software measurement studies; and (5) Ada technology studies.

Radioactive waste processing device

International Nuclear Information System (INIS)

Inaguma, Masahiko; Takahara, Nobuaki; Hara, Satomi.

1996-01-01

In a processing device for filtering laundry liquid wastes and shower drains incorporated with radioactive materials, a fiber filtration device is disposed and an activated carbon filtration device is also disposed subsequent to the fiber filtration device. In addition, a centrifugal dewatering device is disposed for dewatering spent granular activated carbon in the activated carbon filtration device, and a minute filtering device is disposed for filtering the separated dewatering liquid. Filtrates filtered by the minute filtration device are recovered in a collecting tank. Namely, at first, suspended solid materials in laundry liquid wastes and shower drains are captured, and then, ingredients concerning COD are adsorbed in the activated carbon filtration device. The radioactive liquid wastes of spent granular activated carbon in the activated carbon filtration device are reduced by dewatering them by the centrifugal dewatering device, and then the granular activated carbon is subjected to an additional processing. Further, it is separated by filtration using the minute filtration device and removed as cakes. Since the filtrates are recovered to the collecting tank and filtered again, the water quality of the drains is not degraded. (N.H.)

Belgia rahvuspüha puhul kuuleb Eestis kammermuusikat / Maarja Pehk

Index Scriptorium Estoniae

Pehk, Maarja

2007-01-01

21. juulil on Belgia Kuningriigil rahvuspüha. Suursaadik Pierre Clement Dubuisson tutvustab sel puhul belgia kultuuri kolme kontserdi kaudu. Sel aastal tutvustab saatkond Belgia kultuuri ka koostöös Pimedate Ööde filmifestivaliga

High heat flux device of thermonuclear device

International Nuclear Information System (INIS)

Tachikawa, Nobuo.

1994-01-01

The present invention provides an equipments for high heat flux device (divertor) of a thermonuclear device, which absorbs thermal deformation during operation, has a high installation accuracy, and sufficiently withstands for thermal stresses. Namely, a heat sink member is joined to a structural base. Armour tiles are joined on the heat sink member. Cooling pipes are disposed between the heat sink member and the armour tiles. With such a constitution, the heat sink member using a highly heat conductive material having ductility, such as oxygen free copper, the cooling pipes using a material having excellent high temperature resistance and excellent elongation, such as aluminum-dispersed reinforced copper, and the armour tiles are completely joined on the structural base. Therefore, when thermal deformation tends to cause in the high heat flux device such as a divertor, cooling pipes cause no plastic deformation because of their high temperature resistance, but the heat sink member such as a oxygen free copper causes plastic deformation to absorb thermal deformation. As a result, the high heat flux device such as a divertor causes no deformation. (I.S.)

Repairing method and device for thermonuclear device

International Nuclear Information System (INIS)

Sakurai, Akiko; Masumoto, Hiroshi; Tachikawa, Nobuo.

1995-01-01

The present invention provides a method of and a device for repairing a first wall and a divertor disposed in a vacuum vessel of a thermonuclear device. Namely, an armour tile of the divertor secured, by a brazing material, in a vacuum vessel of the thermonuclear device in which high temperature plasmas of deuterium and tritium are confined to cause fusion reaction is induction-heated or heated by microwaves to melt the brazing material. Only the armour tile is thus exchanged by its attachment/detachment. This device comprises, in the vacuum vessel, an armour tile attaching/detaching manipulator and a repairing manipulator comprising a heating manipulator having induction heating coils at the top end thereof. Induction heating coils are connected to an AC power source. According to the present invention, the armour tile is exchanged without taking the divertor out of the vacuum vessel. Therefore, cutting of a divertor cooling tube for taking the divertor out of the vacuum vessel and re-welding of the divertor for attaching it to the vacuum vessel again are no more necessary. (I.S.)

Medical Device Safety

Science.gov (United States)

A medical device is any product used to diagnose, cure, or treat a condition, or to prevent disease. They ... may need one in a hospital. To use medical devices safely Know how your device works. Keep ...

Genetic variation in selenoprotein genes, lifestyle, and risk of colon and rectal cancer.

Directory of Open Access Journals (Sweden)

Martha L Slattery

Full Text Available BACKGROUND: Associations between selenium and cancer have directed attention to role of selenoproteins in the carcinogenic process. METHODS: We used data from two population-based case-control studies of colon (n = 1555 cases, 1956 controls and rectal (n = 754 cases, 959 controls cancer. We evaluated the association between genetic variation in TXNRD1, TXNRD2, TXNRD3, C11orf31 (SelH, SelW, SelN1, SelS, SepX, and SeP15 with colorectal cancer risk. RESULTS: After adjustment for multiple comparisons, several associations were observed. Two SNPs in TXNRD3 were associated with rectal cancer (rs11718498 dominant OR 1.42 95% CI 1.16,1.74 pACT 0.0036 and rs9637365 recessive 0.70 95% CI 0.55,0.90 pACT 0.0208. Four SNPs in SepN1 were associated with rectal cancer (rs11247735 recessive OR 1.30 95% CI 1.04,1.63 pACT 0.0410; rs2072749 GGvsAA OR 0.53 95% CI 0.36,0.80 pACT 0.0159; rs4659382 recessive OR 0.58 95% CI 0.39,0.86 pACT 0.0247; rs718391 dominant OR 0.76 95% CI 0.62,0.94 pACT 0.0300. Interaction between these genes and exposures that could influence these genes showed numerous significant associations after adjustment for multiple comparisons. Two SNPs in TXNRD1 and four SNPs in TXNRD2 interacted with aspirin/NSAID to influence colon cancer; one SNP in TXNRD1, two SNPs in TXNRD2, and one SNP in TXNRD3 interacted with aspirin/NSAIDs to influence rectal cancer. Five SNPs in TXNRD2 and one in SelS, SeP15, and SelW1 interacted with estrogen to modify colon cancer risk; one SNP in SelW1 interacted with estrogen to alter rectal cancer risk. Several SNPs in this candidate pathway influenced survival after diagnosis with colon cancer (SeP15 and SepX1 increased HRR and rectal cancer (SepX1 increased HRR. CONCLUSIONS: Findings support an association between selenoprotein genes and colon and rectal cancer development and survival after diagnosis. Given the interactions observed, it is likely that the impact of cancer susceptibility from genotype is

Position measuring device

International Nuclear Information System (INIS)

Maeda, Kazuyuki; Takahashi, Shuichi; Maruyama, Mayumi

1998-01-01

The present invention provides a device capable of measuring accurate position and distance easily even at places where operator can not easily access, such as cell facilities for vitrifying radioactive wastes. Referring to a case of the vitrifying cell, an objective equipment settled in the cell is photographed by a photographing device. The image is stored in a position measuring device by way of an image input device. After several years, when the objective equipment is exchanged, a new objective equipment is photographed by a photographing device. The image is also stored in the position measuring device. The position measuring device compares the data of both of the images on the basis of pixel unit. Based on the image of the equipment before the exchange as a reference, extent of the displacement of the installation position of the equipment on the image after the exchange caused by installation error and manufacturing error is determined to decide the position of the equipment after exchange relative to the equipment before exchange. (I.S.)

78 FR 34669 - Certain Electronic Devices, Including Wireless Communication Devices, Portable Music and Data...

Science.gov (United States)

2013-06-10

..., Including Wireless Communication Devices, Portable Music and Data Processing Devices, and Tablet Computers... importing wireless communication devices, portable music and data processing devices, and tablet computers... certain electronic devices, including wireless communication devices, portable music and data processing...

Novel Concepts for Device to Device Communication using Network Coding

DEFF Research Database (Denmark)

Pahlevani, Peyman; Hundebøll, Martin; Pedersen, Morten Videbæk

2014-01-01

Device-to-device communication is currently a hot research topic within 3GPP. Even though D2D communication has been part of previous ad hoc, meshed and sensor networks proposals, the main contribution by 3GPP is that the direct communication among two devices is carried out over a dynamically as...

PENGARUH EKSTRAK KULIT MANGGIS (Garcinia mangostana L. TERHADAP TESTIS TIKUS PUTIH YANG DIBERI PAPARAN GELOMBANG ELEKTROMAGNETIK HANDPHONE

Directory of Open Access Journals (Sweden)

Muhartono Muhartono

2017-04-01

Full Text Available Gelombang elektromagnetik handphone dapat menyebabkan peningkatan reactive oxygen species (ROS sehingga merubah struktur histopatologi testis. Untuk mengatasinya dibutuhkan senyawa antioksidan yang terkandung dalam kulit manggis. Penelitian ini bertujuan untuk mengetahui pengaruh ekstrak etanol kulit manggis (Garcinia mangostana L. dalam memperbaiki gambaran histopatologi testis terhadap sel spermatozoa dan spermatogenik tikus putih (Rattus norvegicus galur Sprague dawley yang diberi paparan gelombang elektromagnetik handphone. Penelitian ini menggunakan 25 ekor tikus putih galur Sprague dawley dengan berat badan 200-300 gram yang dibagi ke dalam 5 kelompok, yaitu kontrol 1 (K1 tikus yang tidak diberikan perlakuan, kontrol 2 (K2 diberikan NaCl 0,9% dan paparan gelombang elektromagnetik handphone, pada kelompok perlakuan (P1, (P2 dan (P3 diberikan ekstrak etanol kulit manggis dengan dosis bertingkat 50, 100, 200 mg/kgBB dan dilakukan paparan gelombang elektromagnetik handphone selama 3 jam/28 hari. Hasil penelitian ini didapatkan rerata jumlah sel spermatozoa pada K1=173,75±16,978 SD, K2=101,75±7,455 SD, P1=148,50±10,149 SD, P2=162,50±10,247 SD, P3=180,75±7,365 SD dan rerata jumlah sel spermatogenik pada K1=306,75±11,955 SD, K2=157,00±7,303 SD, P1=243,50±21,672 SD P2=266,75±10,340 SD P3=294,75±13,150 SD. Pada uji One Way Anova (p<0,005 didapatkan masing-masing sel spermatozoa dan sel spermatogenik menunjukkan hasil yang bermakna p=0,000. Ekstrak etanol kulit manggis (Garcinia mangostana L. dapat memperbaiki gambaran histopatologi testis dengan meningkatkan jumlah sel spermatozoa dan sel spermatogenik tikus putih (Rattus norvegicus galur Sprague dawley yang diberi paparan gelombang elektromagnetik handphone.

Device configuration-management system

International Nuclear Information System (INIS)

Nowell, D.M.

1981-01-01

The Fusion Chamber System, a major component of the Magnetic Fusion Test Facility, contains several hundred devices which report status to the Supervisory Control and Diagnostic System for control and monitoring purposes. To manage the large number of diversity of devices represented, a device configuration management system was required and developed. Key components of this software tool include the MFTF Data Base; a configuration editor; and a tree structure defining the relationships between the subsystem devices. This paper will describe how the configuration system easily accomodates recognizing new devices, restructuring existing devices, and modifying device profile information

Selenium regulates gene expression of selenoprotein W in chicken skeletal muscle system.

Science.gov (United States)

Ruan, Hongfeng; Zhang, Ziwei; Wu, Qiong; Yao, Haidong; Li, Jinlong; Li, Shu; Xu, Shiwen

2012-01-01

Selenoprotein W (SelW) is abundantly expressed in skeletal muscles of mammals and necessary for the metabolism of skeletal muscles. However, its expression pattern in skeletal muscle system of birds is still uncovered. Herein, to investigate the distribution of SelW mRNA in chicken skeletal muscle system and its response to different selenium (Se) status, 1-day-old chickens were exposed to various concentrations of Se as sodium selenite in the feed for 35 days. In addition, myoblasts were treated with different concentrations of Se in the medium for 72 h. Then the levels of SelW mRNA in skeletal muscles (wing muscle, pectoral muscle, thigh muscle) and myoblasts were determined on days 1, 15, 25, and 35 and at 0, 24, 48, and 72 h, respectively. The results showed that SelW was detected in all these muscle components and it increased both along with the growth of organism and the differentiation process of myoblasts. The thigh muscle is more responsive to Se intake than the other two skeletal muscle tissues while the optimal Se supplementation for SelW mRNA expression in chicken myoblasts was 10(-7) M. In summary, Se plays important roles in the development of chicken skeletal muscles. To effect optimal SelW gene expression, Se must be provided in the diet and the media in adequate amounts and neither at excessive nor deficient levels.

Deficient tyrosine phosphorylation of c-Cbl and associated proteins in phorbol ester-resistant EL4 mouse thymoma cells.

Science.gov (United States)

Luo, X; Sando, J J

1997-05-02

Two tyrosine phosphoproteins in phorbol ester-sensitive EL4 (S-EL4) mouse thymoma cells have been identified as the p120 c-Cbl protooncogene product and the p85 subunit of phosphatidylinositol 3-kinase. Tyrosine phosphorylation of p120 and p85 increased rapidly after phorbol ester stimulation. Phorbol ester-resistant EL4 (R-EL4) cells expressed comparable amounts of c-Cbl and phosphatidylinositol 3-kinase protein but greatly diminished tyrosine phosphorylation. Co-immunoprecipitation experiments revealed complexes of c-Cbl with p85, and of p85 with the tyrosine kinase Lck in phorbol ester-stimulated S-EL4 but not in unstimulated S-EL4 or in R-EL4 cells. In vitro binding of c-Cbl with Lck SH2 or SH3 domains was detected in both S-EL4 and R-EL4 cells, suggesting that c-Cbl, p85, and Lck may form a ternary complex. In vitro kinase assays revealed phosphorylation of p85 by Lck only in phorbol ester-stimulated S-EL4 cells. Collectively, these results suggest that Cbl-p85 and Lck-p85 complexes may form in unstimulated S-EL4 and R-EL4 cells but were not detected due to absence of tyrosine phosphorylation of p85. Greatly decreased tyrosine phosphorylation of c-Cbl and p85 in the complexes may contribute to the failure of R-EL4 cells to respond to phorbol ester.

Studi Bio-Molekuler Virus Penyakit Jembrana: Sebagai Dasar Pengembangan Tissue Culture Vaksin

Directory of Open Access Journals (Sweden)

I Wayan Masa Tanaya

2016-08-01

Full Text Available Patogenesis dan bio-molekuler virus penyakit Jembrana (JDV hanya menyerang B-cells sebagai target selnya, sehingga antibodi (kekebalan humoral tidak terbentuk sampai 2-3 bulan pasca infeksi. Peningkatan populasi CD8+ T-cells secara signifikan dan menurunnya CD4+ T-cells secara drastis selama phase akut berakibat turunnya rasio CD8:CD4 yang menyebabkan meningkatnya kepekaan hewan terhadap infeksi sekunder. Sembilan ekor sapi bali yang digunakan dalam penelitian ini dikelompokkan berdasarkan status infeksi terkait pengambilan sampel. Tujuh ekor diinfeksi dengan JDV isolate Tabanan/87 dan 2 ekor lainnya diinfeksi dengan BIV isolate R29, sebagai kontrol negatif (Non-JDV infected cattle. Sampel diuji terhadap identitas selular dan target sel, kekebalan selular dan ekpresi sitokin. Sampel diuji dengan uji Flow cytometry dan dianalisis dengan uji varian. Hasil penelitian menunjukkan bahwa perubahan sub-populasi sel-sel T terkait penyembuhan infeksi JDV memperkuat peranan kekebalan seluler dalam proses kesembuhan penyakit Jembrana. Bukti-bukti atas meningkatnya ekpresi gen-gen sitokin yang diproduksi oleh sel-sel T CD8 terutama, IFN-g dan IL-2, mengindikasikan pentingnya gen-gen ini dalam proses infeksi dan kesembuhan.

Gauging device

International Nuclear Information System (INIS)

Qurnell, F.D.; Patterson, C.B.

1979-01-01

A gauge supporting device for measuring say a square tube comprises a pair of rods or guides in tension between a pair of end members, the end members being spaced apart by a compression member or members. The tensioned guides provide planes of reference for measuring devices moved therealong on a carriage. The device is especially useful for making on site dimensional measurements of components, such as irradiated and therefore radioactive components, that cannot readily be transported to an inspection laboratory. (UK)

Implantable electronic medical devices

CERN Document Server

Fitzpatrick, Dennis

2014-01-01

Implantable Electronic Medical Devices provides a thorough review of the application of implantable devices, illustrating the techniques currently being used together with overviews of the latest commercially available medical devices. This book provides an overview of the design of medical devices and is a reference on existing medical devices. The book groups devices with similar functionality into distinct chapters, looking at the latest design ideas and techniques in each area, including retinal implants, glucose biosensors, cochlear implants, pacemakers, electrical stimulation t

Migration of activated CD8(+) T lymphocytes to sites of viral infection does not require endothelial selectins

DEFF Research Database (Denmark)

Bartholdy, C; Marker, O; Thomsen, Allan Randrup

2000-01-01

or marginal reduction was found in E/P-sel -/- mice, compared with wild-type mice after local challenge with virus or immunodominant viral MHC class I restricted peptide, respectively. Similar results were obtained after adoptive transfer of wild-type effector cells into E/P-sel -/- recipients, whereas...... footpad swelling was markedly decreased in P-sel/ICAM-1 -/- and ICAM-1 -/- recipients. LCMV-induced footpad swelling was completely inhibited in ICAM-deficient mice transfused with donor cell preincubated with soluble VCAM-1-Ig chimeric protein. Taken together, the current findings strongly indicate...

End-to-End Verification of Information-Flow Security for C and Assembly Programs

Science.gov (United States)

2016-04-01

seL4 security verification [18] avoids this issue in the same way. In that work, the authors frame their solution as a restriction that disallows...identical: (σ, σ′1) ∈ TM ∧ (σ, σ′2) ∈ TM =⇒ Ol(σ′1) = Ol(σ′2) The successful security verifications of both seL4 and mCertiKOS provide reasonable...evidence that this restriction on specifications is not a major hindrance for usability. Unlike the seL4 verification, however, our framework runs into a

Festol külas / Taivo Paju

Index Scriptorium Estoniae

Paju, Taivo, 1968-

2007-01-01

Stuttgardis peetakse Euroopa suurim kooste- ja tootekäsitsemise mess MOTEK. Sel puhul kutsus maailma üks suurimaid pneumaatikaseadmete tootjaid Festo külla ajakirjanikud kogu maailmast. Sel aastal käis Festo uusi tooteid vaatamas ka ajakiri Inseneeria

Evaluasi Performansi Jaringan UMTS di Kota Semarang menggunakan Metode Drive Test

Directory of Open Access Journals (Sweden)

HASANAH PUTRI

2018-02-01

Full Text Available ABSTRAK Saat ini penggunaan telepon seluler tidak hanya untuk komunikasi suara, melainkan juga untuk komunikasi data. Kota Semarang merupakan salah satu kota besar dengan jumlah pengguna telepon seluler yang banyak. Kondisi ini membutuhkan dukungan kualitas jaringan yang optimal dan kecepatan akses yang tinggi.  Pada penelitian ini dilakukan pengujian kualitas sinyal jaringan UMTS di kota tersebut. Pengukuran dilakukan dengan metode drive test menggunakan software TEMS dan Map info dalam pengolahan datanya. Ada beberapa parameter pengamatan dalam kegiatan pengukuran kualitas jaringan UMTS ini diantaranya RSCP (Receive Signal Code Power, Ec/No, Throughput dan KPI (Key Performance indicator. Setelah dilakukan pengukuran dan analisis perlu dilakukan proses simulasi optimasi yang dilakukan menggunakan software Atoll 3.2.1. Dari hasil pengukuran diperoleh nilai parameter RSCP, Ec/No, dan Throughput berturut-turut sebesar 68,45%, 91%, dan 52.2%. Setelah dilakukan simulasi optimasi terjadi peningkatan nilai parameter RSCP dan Ec/Noberturut-turut sebesar 97.28% dan 99.74%. Kata kunci: UMTS, Drive Test, Map Info, Atoll, KPI. ABSTRACT Today the use of mobile phone is not only for voice communication but also for data communications (mobile Internet. There are a lot of mobile phone users in Semarang, so that it requires the support of a good network quality and high-speed access. In this research, it will test and measure the signal quality UMTS network. The measurement is done with drive test method by using TEMS and Map Info software. There are several parameters of observation in quality measurement of UMTS network. They are RSCP (Received Signal Code Power, Ec/No , Throughput and KPI (Key Performance Indicator. After measurement and analysis it is needed to simulate the optimization recommendations process by using Atoll 3.2.1. to the observation’s parameters. From the measurement results obtained parameter values RSCP, Ec/No , and Throughput

Evaluasi Performansi Jaringan UMTS di Kota Semarang menggunakan Metode Drive Test

Directory of Open Access Journals (Sweden)

HASANAH PUTRI

2017-07-01

Full Text Available ABSTRAKSaat ini penggunaan telepon seluler tidak hanya untuk komunikasi suara, melainkan juga untuk komunikasi data. Kota Semarang merupakan salah satu kota besar dengan jumlah pengguna telepon seluler yang banyak. Kondisi ini membutuhkan dukungan kualitas jaringan yang optimal dan kecepatan akses yang tinggi.  Pada penelitian ini dilakukan pengujian kualitas sinyal jaringan UMTS di kota tersebut. Pengukuran dilakukan dengan metode drive test menggunakan software TEMS dan Map info dalam pengolahan datanya. Ada beberapa parameter pengamatan dalam kegiatan pengukuran kualitas jaringan UMTS ini diantaranya RSCP (Receive Signal Code Power, Ec/No , Throughput dan KPI (Key Performance indicator. Setelah dilakukan pengukuran dan analisis perlu dilakukan proses simulasi optimasi yang dilakukan menggunakan software Atoll 3.2.1. Dari hasil pengukuran diperoleh nilai parameter RSCP, Ec/No , dan Throughput berturut-turut sebesar 68,45%, 91%, dan 52.2%. Setelah dilakukan simulasi optimasi terjadi peningkatan nilai parameter RSCP dan Ec/No berturut-turut sebesar 97.28% dan 99.74%.Kata kunci: UMTS, Drive Test, Map Info, Atoll, KPI.ABSTRACTToday the use of mobile phone is not only for voice communication but also for data communications (mobile Internet. There are a lot of mobile phone users in Semarang, so that it requires the support of a good network quality and high-speed access. In this research, it will test and measure the signal quality UMTS network. The measurement is done with drive test method by using TEMS and Map Info software. There are several parameters of observation in quality measurement of UMTS network. They are RSCP (Received Signal Code Power, Ec/No , Throughput and KPI (Key Performance Indicator. After measurement and analysis it is needed to simulate the optimization recommendations process by using Atoll 3.2.1. to the observation’s parameters. From the measurement results obtained parameter values RSCP, Ec/No , and Throughput

Device-independent randomness amplification with a single device

International Nuclear Information System (INIS)

Plesch, Martin; Pivoluska, Matej

2014-01-01

Expansion and amplification of weak randomness with untrusted quantum devices has recently become a very fruitful topic of research. Here we contribute with a procedure for amplifying a single weak random source using tri-partite GHZ-type entangled states. If the quality of the source reaches a fixed threshold R=log 2 ⁡(10), perfect random bits can be produced. This technique can be used to extract randomness from sources that can't be extracted neither classically, nor by existing procedures developed for Santha–Vazirani sources. Our protocol works with a single fault-free device decomposable into three non-communicating parts, that is repeatedly reused throughout the amplification process. - Highlights: • We propose a protocol for device independent randomness amplification. • Our protocol repeatedly re-uses a single device decomposable into three parts. • Weak random sources with min-entropy rate greater than 1/4 log 2 ⁡(10) can be amplified. • Security against all-quantum adversaries is achieved

Smart portable rehabilitation devices

Directory of Open Access Journals (Sweden)

Leahey Matt

2005-07-01

Full Text Available Abstract Background The majority of current portable orthotic devices and rehabilitative braces provide stability, apply precise pressure, or help maintain alignment of the joints with out the capability for real time monitoring of the patient's motions and forces and without the ability for real time adjustments of the applied forces and motions. Improved technology has allowed for advancements where these devices can be designed to apply a form of tension to resist motion of the joint. These devices induce quicker recovery and are more effective at restoring proper biomechanics and improving muscle function. However, their shortcoming is in their inability to be adjusted in real-time, which is the most ideal form of a device for rehabilitation. This introduces a second class of devices beyond passive orthotics. It is comprised of "active" or powered devices, and although more complicated in design, they are definitely the most versatile. An active or powered orthotic, usually employs some type of actuator(s. Methods In this paper we present several new advancements in the area of smart rehabilitation devices that have been developed by the Northeastern University Robotics and Mechatronics Laboratory. They are all compact, wearable and portable devices and boast re-programmable, real time computer controlled functions as the central theme behind their operation. The sensory information and computer control of the three described devices make for highly efficient and versatile systems that represent a whole new breed in wearable rehabilitation devices. Their applications range from active-assistive rehabilitation to resistance exercise and even have applications in gait training. The three devices described are: a transportable continuous passive motion elbow device, a wearable electro-rheological fluid based knee resistance device, and a wearable electrical stimulation and biofeedback knee device. Results Laboratory tests of the devices

Smart portable rehabilitation devices.

Science.gov (United States)

Mavroidis, Constantinos; Nikitczuk, Jason; Weinberg, Brian; Danaher, Gil; Jensen, Katherine; Pelletier, Philip; Prugnarola, Jennifer; Stuart, Ryan; Arango, Roberto; Leahey, Matt; Pavone, Robert; Provo, Andrew; Yasevac, Dan

2005-07-12

The majority of current portable orthotic devices and rehabilitative braces provide stability, apply precise pressure, or help maintain alignment of the joints with out the capability for real time monitoring of the patient's motions and forces and without the ability for real time adjustments of the applied forces and motions. Improved technology has allowed for advancements where these devices can be designed to apply a form of tension to resist motion of the joint. These devices induce quicker recovery and are more effective at restoring proper biomechanics and improving muscle function. However, their shortcoming is in their inability to be adjusted in real-time, which is the most ideal form of a device for rehabilitation. This introduces a second class of devices beyond passive orthotics. It is comprised of "active" or powered devices, and although more complicated in design, they are definitely the most versatile. An active or powered orthotic, usually employs some type of actuator(s). In this paper we present several new advancements in the area of smart rehabilitation devices that have been developed by the Northeastern University Robotics and Mechatronics Laboratory. They are all compact, wearable and portable devices and boast re-programmable, real time computer controlled functions as the central theme behind their operation. The sensory information and computer control of the three described devices make for highly efficient and versatile systems that represent a whole new breed in wearable rehabilitation devices. Their applications range from active-assistive rehabilitation to resistance exercise and even have applications in gait training. The three devices described are: a transportable continuous passive motion elbow device, a wearable electro-rheological fluid based knee resistance device, and a wearable electrical stimulation and biofeedback knee device. Laboratory tests of the devices demonstrated that they were able to meet their design

Development of a wireless blood pressure measuring device with smart mobile device.

Science.gov (United States)

İlhan, İlhan; Yıldız, İbrahim; Kayrak, Mehmet

2016-03-01

Today, smart mobile devices (telephones and tablets) are very commonly used due to their powerful hardware and useful features. According to an eMarketer report, in 2014 there were 1.76 billion smartphone users (excluding users of tablets) in the world; it is predicted that this number will rise by 15.9% to 2.04 billion in 2015. It is thought that these devices can be used successfully in biomedical applications. A wireless blood pressure measuring device used together with a smart mobile device was developed in this study. By means of an interface developed for smart mobile devices with Android and iOS operating systems, a smart mobile device was used both as an indicator and as a control device. The cuff communicating with this device through Bluetooth was designed to measure blood pressure via the arm. A digital filter was used on the cuff instead of the traditional analog signal processing and filtering circuit. The newly developed blood pressure measuring device was tested on 18 patients and 20 healthy individuals of different ages under a physician's supervision. When the test results were compared with the measurements made using a sphygmomanometer, it was shown that an average 93.52% accuracy in sick individuals and 94.53% accuracy in healthy individuals could be achieved with the new device. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Incore instrumentation device

International Nuclear Information System (INIS)

Fujita, Kazuhiko.

1996-01-01

A position of a detector is detected by a driving device, and the detected values are sampled by a newly disposed central processing unit for sampling the detected values depending on the sampling position of the detected values. Since the sampling position of the detected values is detected by the driving device, the sampling position for the detection values does not rely on the speed of the driving motor of the driving device. The load on the central processing device for controlling the device is lowered by newly disposing the central processing unit for sampling detected values. When the values for the position of the detector counted after conversion to digital values reach the digital values corresponding to the detection value sampling position outputted from the central processing unit for controlling the device, a counted value comparison circuit causes the central processing unit for controlling the device to sample the detection values outputted from the detector. Then, the processing speed can be increased without interruption processings, which can save the central processing unit for sampling detection values. In addition, software can be simplified and loads can be lowered. (N.H.)

Some epitopes conservation in non structural 3 protein dengue virus serotype 4

Directory of Open Access Journals (Sweden)

Tegar A. P. Siregar

2016-03-01

Full Text Available AbstrakLatar belakang: Protein Non Struktural 3 (NS3 virus dengue menginduksi respon antibodi netralisasidan respon sel T CD4+ dan CD8+, serta berperan dalam replikasi virus. Protein NS3 memiliki epitopepitopsel T dan B yang terdapat perbedaan kelestarian pada berbagai strain virus dengue serotipe 4(DENV-4. Penelitian ini bertujuan untuk mengetahui kelestarian epitop sel T dan B pada protein NS3DENV-4 strain-strain dunia dan keempat serotipe virus dengue strain Indonesia.Metode: Penelitian ini dilakukan di Departemen Mikrobiologi Fakultas Kedokteran UI sejak Juni 2013 - April2014. Sekuens asam amino NS3 DENV-4 strain 081 didapatkan setelah produk PCR gen NS3 DENV-4 081disekuensing. Epitop-epitop sel T dan sel B protein NS3 DENV-4 081 dianalisis dan dibandingkan dengansekuens asam amino protein NS3 dari 124 strain DENV-4 di dunia dan keempat serotipe DENV strain Indonesia.Strain-strain dunia merupakan strain yang ada di benua Amerika (Venezuela, Colombia, dll dan Asia (Cina,Singapura, dll. Referensi posisi epitop sel T dan B protein NS3 diperoleh dari laporan penelitian terdahulu.Hasil: Delapan epitop sel T dan 2 epitop sel B dari protein NS3 DENV-4 081 ternyata identik dan lestaripada protein NS3 dari 124 strain DENV-4 dunia. Epitop sel B di posisi asam amino 537-544 pada proteinNS3 DENV-4 081 ternyata identik dan lestari dengan epitop sel B protein NS3 dari keempat serotipeDENV strain Indonesia.Kesimpulan: Kelestarian yang luas dari epitop sel T dan B pada hampir seluruh strain DENV-4 dunia danserotipe-serotipe DENV strain Indonesia. (Health Science Journal of Indonesia 2015;6:126-31Kata kunci: virus dengue, protein NS3, epitop sel T, epitop sel B AbstractBackground: Non Structural 3 (NS3 protein of dengue virus (DENV is known to induce antibody, CD4+and CD8+ T cell responses, and playing role in viral replication. NS3 protein has T and B cell epitopes,which has conservation difference between DENV-4 strains. This study aimed to identify

Inspection device in liquid

International Nuclear Information System (INIS)

Nagaoka, Etsuo.

1996-01-01

The present invention provides an inspection device in PWR reactor core in which inspection operations are made efficient by stabilizing a posture of the device in front-to-back, vertical and left-to-right directions by a simple structure. When the device conducts inspection while running in liquid, the front and the back directions of the device main body are inspected using a visual device while changing the posture by operating a front-to-back direction propulsion device and a right-to-left direction propulsion device, and a vertical direction propulsion device against to rolling, pitching and yawing of the device main body. In this case, a spherical magnet moves freely in the gravitational direction in a vibration-damping fluid in a non-magnetic spherical shell following the change of the posture of the device main body, in which the vibrations due to the movement of the spherical magnet is settled by the vibration-damping fluid thereby stabilizing the posture of the device main body. At a typical inspection posture, the settling effect is enhanced by the attraction force between the spherical magnets in the spherical shell and each of magnetic force-attracted magnetic members disposed to the outer circumference of the shell, and the posture of the device main body can be confirmed in front-to-back, right-to-left and vertical directions by each of the posture confirming magnetic sensors. (N.H.)

Rancang Bangun Sistem Monitoring Ketinggian Permukaan Air Menggunakan Mikrokontroler ATMEGA328P Berbasis Web Service

Directory of Open Access Journals (Sweden)

Rausan Fikri

2015-11-01

Full Text Available Telah dilakukan pembuatan alat sistem monitoring ketinggian permukaan air dengan menggunakan mikrokontroler ATmega328P berbasis web service. Sistem perangkat secara garis besar terdiri atas mikrokontroler ATmega328P, sensor ultrasonik HC-SR04, sensor suhu dan kelembaban  DHT-11, modul bluetooth HC-05 dan modul ethernet ENC28J60. Sistem juga dilengkapi dengan panel surya dan baterai berkapasitas 35Ah sebagai sumber energi listrik.  Setelah dilakukan pengujian, alat ini memiliki keakuratan rata-rata sebesar 96,48% dalam menentukan ketinggian permukaan air. Hasil dari pengukuran dapat diakses secara online dan realtime pada sebuah halaman web yang ditampilkan dalam bentuk grafik dan tabel. Ketinggian maksimum yang dapat diukur alat ini sebesar 2,5 m dengan rentang waktu pengukuran setiap 10 menit. Alat ini bisa digunakan untuk mengukur ketinggian permukaan air.

Studi Eksperimen Distribusi Temperatur Nyala Api Kompor Bioetanol Tipe Side Burner dengan Variasi Diameter Firewall

Directory of Open Access Journals (Sweden)

R.R. Vienna Sona Saputri Soetadi

2012-09-01

Full Text Available Untuk mendapatkan kompor bioetanol efisiensi thermal maksimal diperlukan penelitian komprehensif. Salah satunya adalah penelitian terhadap posisi peletakkan beban pada kompor bioetanol kompak. Pengujian dilakukan pada kompor uji bioetanol dengan kadar 99%, yaitu kompor bioetanol tipe side burner dengan firewall 2.5 inci dan firewall 3 inci. Pengukuran temperatur api dengan 13 thermocouple K dengan pengukuran searah api keatas setiap 5 mm-an. Kemudian, water boiling test dilakukan untuk mendapatkan daya dan beban dan dilanjutkan mengukur waktu pendidihan air. Hasil penelitian ini menunjukkan gambaran total distribusi temperatur nyala api difusi. Hasil menunjukkan untuk kompor 2.5 inci dengan daya 1.6 kW mempunyai temperatur 542 ºC dengan jarak ketinggian 5 mm dari rim kompor sedangkan kompor 3 inci menghasilkan daya 2.38 kW dengan temperatur 516 ºC.

PENENTUAN TAHANAN JENIS BATUAN ANDESIT MENGGUNAKAN METODE GEOLISTRIK KONFIGURASI SCHLUMBERGER (STUDI KASUS DESA POLOSIRI

Directory of Open Access Journals (Sweden)

- Munaji

2013-11-01

Full Text Available Telah dilakukan penelitian untuk menentukan nilai resistivitas dan kedalaman batuan andesit di Desa Polosiri. Prinsip kerja metode geolistrik adalah mempelajari aliran listrik di dalam bumi dan cara mendeteksi di permukaan bumi. Metode tahanan jenis didasari oleh hukum Ohm, untuk mengetahui jenis lapisan batuan didasarkan pada distribusi nilai resistivitas pada tiap lapisan. Variasi harga tahanan jenis akan didapatkan jika jarak masing-masing elektroda diubah, sesuai konfigurasi alat yang dipakai (konfigurasi Schlumberger. Data hasil pengukuran di lapangan berupa beda potensial dan arus yang dapat digunakan untuk menghitung resistivitas semu. Penelitian ini dilakukan sebanyak tiga lintasan. Data hasil pengukuran diolah menggunakan software IPI2Win. Berdasarkan hasil penelitian diperoleh bahwa batuan andesit di Desa Polisiri memiliki resistivitas 212 Ωm – 300 Ωm dengan kedalaman 1.3 m - 1.86 m.

78 FR 16865 - Certain Electronic Devices, Including Wireless Communication Devices, Portable Music and Data...

Science.gov (United States)

2013-03-19

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-794] Certain Electronic Devices, Including Wireless Communication Devices, Portable Music and Data Processing Devices, and Tablet Computers... certain electronic devices, including wireless communication devices, portable music and data processing...

Predistortion control device and method, assembly including a predistortion control device

NARCIS (Netherlands)

Kokkeler, Andre B.J.

2003-01-01

A predistortion control device (1). The device has a first predistortion control input connectable to a power amplifier output (21); a second predistortion control input (11) connectable to a signal contact of a predistortion device; and a predistortion control output (12) connectable to a control

78 FR 1247 - Certain Electronic Devices, Including Wireless Communication Devices, Tablet Computers, Media...

Science.gov (United States)

2013-01-08

... Wireless Communication Devices, Tablet Computers, Media Players, and Televisions, and Components Thereof... devices, including wireless communication devices, tablet computers, media players, and televisions, and... wireless communication devices, tablet computers, media players, and televisions, and components thereof...

Initiation devices, initiation systems including initiation devices and related methods

Energy Technology Data Exchange (ETDEWEB)

Daniels, Michael A.; Condit, Reston A.; Rasmussen, Nikki; Wallace, Ronald S.

2018-04-10

Initiation devices may include at least one substrate, an initiation element positioned on a first side of the at least one substrate, and a spark gap electrically coupled to the initiation element and positioned on a second side of the at least one substrate. Initiation devices may include a plurality of substrates where at least one substrate of the plurality of substrates is electrically connected to at least one adjacent substrate of the plurality of substrates with at least one via extending through the at least one substrate. Initiation systems may include such initiation devices. Methods of igniting energetic materials include passing a current through a spark gap formed on at least one substrate of the initiation device, passing the current through at least one via formed through the at least one substrate, and passing the current through an explosive bridge wire of the initiation device.

High energy devices versus low energy devices in orthopedics treatment modalities

Science.gov (United States)

Schultheiss, Reiner

2003-10-01

The orthopedic consensus group defined in 1997 the 42 most likely relevant parameters of orthopedic shock wave devices. The idea of this approach was to correlate the different clinical outcomes with the physical properties of the different devices with respect to their acoustical waves. Several changes in the hypothesis of the dose effect relationship have been noticed since the first orthopedic treatments. The relation started with the maximum pressure p+, followed by the total energy, the energy density; and finally the single treatment approach using high, and then the multiple treatment method using low energy. Motivated by the reimbursement situation in Germany some manufacturers began to redefine high and low energy devices independent of the treatment modality. The OssaTron as a high energy, single treatment electro hydraulic device gained FDA approval as the first orthopedic ESWT device for plantar fasciitis and, more recently, for lateral epicondylitis. Two low energy devices have now also gained FDA approval based upon a single treatment. Comparing the acoustic data, differences between the OssaTron and the other devices are obvious and will be elaborated upon. Cluster analysis of the outcomes and the acoustical data are presented and new concepts will be suggested.

77 FR 70464 - Certain Electronic Devices, Including Wireless Communication Devices, Portable Music and Data...

Science.gov (United States)

2012-11-26

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-794] Certain Electronic Devices, Including Wireless Communication Devices, Portable Music and Data Processing Devices, and Tablet Computers... wireless communication devices, portable music and data processing devices, and tablet computers, by reason...

Radiation emitting devices regulations

International Nuclear Information System (INIS)

1970-01-01

The Radiation Emitting Devices Regulations are the regulations referred to in the Radiation Emitting Devices Act and relate to the operation of devices. They include standards of design and construction, standards of functioning, warning symbol specifications in addition to information relating to the seizure and detention of machines failing to comply with the regulations. The radiation emitting devices consist of the following: television receivers, extra-oral dental x-ray equipment, microwave ovens, baggage inspection x-ray devices, demonstration--type gas discharge devices, photofluorographic x-ray equipment, laser scanners, demonstration lasers, low energy electron microscopes, high intensity mercury vapour discharge lamps, sunlamps, diagnostic x-ray equipment, ultrasound therapy devices, x-ray diffraction equipment, cabinet x-ray equipment and therapeutic x-ray equipment

77 FR 60720 - Certain Electronic Devices, Including Wireless Commmunication Devices, Portable Music and Data...

Science.gov (United States)

2012-10-04

... INTERNATIONAL TRADE COMMISSION [Investigation No. 337-TA-794] Certain Electronic Devices, Including Wireless Commmunication Devices, Portable Music and Data Processing Devices, and Tablet Computers... communication devices, portable music and data processing devices, and tablet computers, imported by Apple Inc...

78 FR 29672 - Cardiovascular Devices; Reclassification of External Counter-Pulsating Devices for Treatment of...

Science.gov (United States)

2013-05-21

.... FDA-2013-N-0487] Cardiovascular Devices; Reclassification of External Counter- Pulsating Devices for... proposed rule (44 FR 13426, March 9, 1979), the Cardiovascular Device Classification Panel (the 1979 Panel... of Subjects in 21 CFR Part 870 Medical devices, Cardiovascular devices...

Recoil transporter devices

International Nuclear Information System (INIS)

Madhavan, N.

2005-01-01

The study of sparsely produced nuclear reaction products in the direction of intense primary beam is a challenging task, the pursuit of which has given rise to the advent or several types of selective devices. These range from a simple parallel plate electrostatic deflector to state-of-the-art electromagnetic separators. There is no single device which can satisfy all the requirements of an ideal recoil transporter, simultaneously. An overview of such devices and their building blocks is presented, which may help in the proper choice of the device as per the experimental requirements. (author)

"Practice What You Preach": Teachers' Perceptions of Emotional Competence and Emotionally Supportive Classroom Practices

Science.gov (United States)

Zinsser, Katherine M.; Denham, Susanne A.; Curby, Timothy W.; Shewark, Elizabeth A.

2015-01-01

Research Findings: The connections between parents' emotional competence (emotion expression, regulation, and knowledge) and children's social-emotional learning (SEL) have been well studied; however, the associations among teachers' emotional competencies and children's SEL remain widely understudied. In the present study, private preschool and…

Somatic embryo-like structures of strawberry regenerated in vitro on media supplemented with 2,4-D and BAP.

Science.gov (United States)

Omar, Genesia F; Mohamed, Fouad H; Haensch, Klaus-Thomas; Sarg, Sawsan H; Morsey, Mohamed M

2013-09-01

Somatic embryo-like structures (SELS) were produced in vitro from leaf disk and petiole explants of two cultivars of strawberry (Fragaria x ananassa Duch) on Murashige and Skoog medium with different concentrations and combinations of 2,4-dichlorophenoxyacetic acid (2,4-D), 6-benzylaminopurine (BAP) and sucrose to check the embryonic nature of these structures histologically. A large number of SELS could be regenerated in both cultivars on media with 2-4 mg L(-1) 2,4-D in combination with 0.5 -1 mg L(-1) BAP and 50 g x L(-1) sucrose. Histological examination of SELS revealed the absence of a root pole. Therefore these structures cannot be strictly classified as somatic embryos. The SELS formed under the tested culture conditions represent malformed shoot-like and leaf-like structures. The importance of these results for the propagation of strawberries via somatic embryogenesis is discussed.

Multiplexed charge-locking device for large arrays of quantum devices

Energy Technology Data Exchange (ETDEWEB)

Puddy, R. K., E-mail: rkp27@cam.ac.uk; Smith, L. W; Chong, C. H.; Farrer, I.; Griffiths, J. P.; Ritchie, D. A.; Smith, C. G. [Cavendish Laboratory, University of Cambridge, Cambridge CB3 0HE (United Kingdom); Al-Taie, H.; Kelly, M. J. [Cavendish Laboratory, University of Cambridge, Cambridge CB3 0HE (United Kingdom); Centre for Advanced Photonics and Electronics, Electrical Engineering Division, Department of Engineering, 9 J. J. Thomson Avenue, University of Cambridge, Cambridge CB3 0FA (United Kingdom); Pepper, M. [Department of Electronic and Electrical Engineering, University College London, WC1E 7JE (United Kingdom)

2015-10-05

We present a method of forming and controlling large arrays of gate-defined quantum devices. The method uses an on-chip, multiplexed charge-locking system and helps to overcome the restraints imposed by the number of wires available in cryostat measurement systems. The device architecture that we describe here utilises a multiplexer-type scheme to lock charge onto gate electrodes. The design allows access to and control of gates whose total number exceeds that of the available electrical contacts and enables the formation, modulation and measurement of large arrays of quantum devices. We fabricate such devices on n-type GaAs/AlGaAs substrates and investigate the stability of the charge locked on to the gates. Proof-of-concept is shown by measurement of the Coulomb blockade peaks of a single quantum dot formed by a floating gate in the device. The floating gate is seen to drift by approximately one Coulomb oscillation per hour.

MemFlash device: floating gate transistors as memristive devices for neuromorphic computing

Science.gov (United States)

Riggert, C.; Ziegler, M.; Schroeder, D.; Krautschneider, W. H.; Kohlstedt, H.

2014-10-01

Memristive devices are promising candidates for future non-volatile memory applications and mixed-signal circuits. In the field of neuromorphic engineering these devices are especially interesting to emulate neuronal functionality. Therefore, new materials and material combinations are currently investigated, which are often not compatible with Si-technology processes. The underlying mechanisms of the device often remain unclear and are paired with low device endurance and yield. These facts define the current most challenging development tasks towards a reliable memristive device technology. In this respect, the MemFlash concept is of particular interest. A MemFlash device results from a diode configuration wiring scheme of a floating gate transistor, which enables the persistent device resistance to be varied according to the history of the charge flow through the device. In this study, we investigate the scaling conditions of the floating gate oxide thickness with respect to possible applications in the field of neuromorphic engineering. We show that MemFlash cells exhibit essential features with respect to neuromorphic applications. In particular, cells with thin floating gate oxides show a limited synaptic weight growth together with low energy dissipation. MemFlash cells present an attractive alternative for state-of-art memresitive devices. The emulation of associative learning is discussed by implementing a single MemFlash cell in an analogue circuit.

MemFlash device: floating gate transistors as memristive devices for neuromorphic computing

International Nuclear Information System (INIS)

Riggert, C; Ziegler, M; Kohlstedt, H; Schroeder, D; Krautschneider, W H

2014-01-01

Memristive devices are promising candidates for future non-volatile memory applications and mixed-signal circuits. In the field of neuromorphic engineering these devices are especially interesting to emulate neuronal functionality. Therefore, new materials and material combinations are currently investigated, which are often not compatible with Si-technology processes. The underlying mechanisms of the device often remain unclear and are paired with low device endurance and yield. These facts define the current most challenging development tasks towards a reliable memristive device technology. In this respect, the MemFlash concept is of particular interest. A MemFlash device results from a diode configuration wiring scheme of a floating gate transistor, which enables the persistent device resistance to be varied according to the history of the charge flow through the device. In this study, we investigate the scaling conditions of the floating gate oxide thickness with respect to possible applications in the field of neuromorphic engineering. We show that MemFlash cells exhibit essential features with respect to neuromorphic applications. In particular, cells with thin floating gate oxides show a limited synaptic weight growth together with low energy dissipation. MemFlash cells present an attractive alternative for state-of-art memresitive devices. The emulation of associative learning is discussed by implementing a single MemFlash cell in an analogue circuit. (paper)

FLUIDICS DEVICE FOR ASSAY

DEFF Research Database (Denmark)

2007-01-01

The present invention relates to a device for use in performing assays on standard laboratory solid supports whereon chemical entities are attached. The invention furthermore relates to the use of such a device and a kit comprising such a device. The device according to the present invention is a...

Electronic security device

Science.gov (United States)

Eschbach, Eugene A.; LeBlanc, Edward J.; Griffin, Jeffrey W.

1992-01-01

The present invention relates to a security device having a control box (12) containing an electronic system (50) and a communications loop (14) over which the system transmits a signal. The device is constructed so that the communications loop can extend from the control box across the boundary of a portal such as a door into a sealed enclosure into which access is restricted whereby the loop must be damaged or moved in order for an entry to be made into the enclosure. The device is adapted for detecting unauthorized entries into such enclosures such as rooms or containers and for recording the time at which such entries occur for later reference. Additionally, the device detects attempts to tamper or interfere with the operation of the device itself and records the time at which such events take place. In the preferred embodiment, the security device includes a microprocessor-based electronic system (50) and a detection module (72) capable of registering changes in the voltage and phase of the signal transmitted over the loop.

Electronic security device

International Nuclear Information System (INIS)

Eschbach, E.A.; LeBlanc, E.J.; Griffin, J.W.

1992-01-01

The present invention relates to a security device having a control box containing an electronic system and a communications loop over which the system transmits a signal. The device is constructed so that the communications loop can extend from the control box across the boundary of a portal such as a door into a sealed enclosure into which access is restricted whereby the loop must be damaged or moved in order for an entry to be made into the enclosure. The device is adapted for detecting unauthorized entries into such enclosures such as rooms or containers and for recording the time at which such entries occur for later reference. Additionally, the device detects attempts to tamper or interfere with the operation of the device itself and records the time at which such events take place. In the preferred embodiment, the security device includes a microprocessor-based electronic system and a detection module capable of registering changes in the voltage and phase of the signal transmitted over the loop. 11 figs

BRAKE DEVICE

Science.gov (United States)

O'Donnell, T.J.

1959-03-10

A brake device is described for utilization in connection with a control rod. The device comprises a pair of parallelogram link mechanisms, a control rod moveable rectilinearly therebetween in opposite directions, and shoes resiliently supported by the mechanism for frictional engagement with the control rod.

Three fundamental devices in one: a reconfigurable multifunctional device in two-dimensional WSe2

Science.gov (United States)

Dhakras, Prathamesh; Agnihotri, Pratik; Lee, Ji Ung

2017-06-01

The three pillars of semiconductor device technologies are (1) the p-n diode, (2) the metal-oxide-semiconductor field-effect transistor and (3) the bipolar junction transistor. They have enabled the unprecedented growth in the field of information technology that we see today. Until recently, the technological revolution for better, faster and more efficient devices has been governed by scaling down the device dimensions following Moore’s Law. With the slowing of Moore’s law, there is a need for alternative materials and computing technologies that can continue the advancement in functionality. Here, we describe a single, dynamically reconfigurable device that implements these three fundamental device functions. The device uses buried gates to achieve n- and p-channels and fits into a larger effort to develop devices with enhanced functionalities, including logic functions, over device scaling. As they are all surface conducting devices, we use one material parameter, the interface trap density of states, to describe the key figure-of-merit of each device.

PENGARUH INFUS BUAH PARE (Momordica charantia L TERHADAP KELENJAR PROSTAT TIKUS PUTIH

Directory of Open Access Journals (Sweden)

M. Wien Winarno

2012-10-01

Full Text Available Buah pare (Momordica charantia L.. selain dikenal sebagai sayuran juga digunakan sebagai obat tradisional. Beberapa hasil penelitian menyimpulkan bahwa perasan buah pare dapat menurunkan kadar glukosa darah. Sebagai kontrasepsi pria, buah pare terbukti menyebabkan abnormalitas struktur morfologi sperma dan menurunkan kadar testosteron darah. Ekstrak buah pare secara invitro menghambat pertumbuhan sel-sel kanker prostat. Buah pare mengandung momordisin, momordin, asam resinal dan sterol. Berdasarkan efeknya yaitu dapat menurunkan hormon testosteron, dan secara invitro menghambat sel-sel kanker prostat dan adanya kandungan sterol, maka dilakukan penelitian Pengaruh infus buah pare (M. charantia L. terhadap kelenjar prostat tikus putih. Penelitian menggunakan hewan coba tikus putih, galur Wistar dengan bobot badan 180-200 gram. Rancangan penelitian yang digunakan "Rancangan Acak Lengkap". Bahan yang diteliti berupa infus buah pare dengan dosis pemberian 625 mg, 1250 mg, 2500 mg dan 5000 mg/kg bb. Sebagai pembanding digunakan akuades. Bahan diberikan secara oral, satu kali sehari selama 30 hari. Hari ke-31 hewan dibunuh, diambil kelenjar prostatnya untuk dibuat preparat histopatologi. Pengamatan meliputi berat dan ketebalan sel epitel kelenjar prostat. Hasilnya, pemberian infus buah pare pada semua dasis dibandingkan dengan akuades (kontrol berpengaruh sangat nyata (P<0,01 terhadap berat kelenjar prostat. Sementara infus buah pare dosis 2500 mg/kg bb. berpengaruh sangat nyata (P<0,01 terhadap tebal set epitel kelenjar prostat. Dengan demikian dapat disimpulkan bahwa infus buah pare dapat menurunkan berat kelenjar prostat normal dan menipiskan sel epitel dari kelenjar prostat.   Kata kunci : pare, Momordica charantia L., kelenjar prostat

Devices, Distractions and Digital Literacy: "Bring Your Own Device" to Polytech

Science.gov (United States)

Drew, Leoni; Forbes, Dianne

2017-01-01

The purpose of this study is to investigate the ways polytechnic students use personal mobile devices to support their learning. This study used purposive sampling and mixed methods to generate data about student ownership and use of mobile digital devices within a single institution. Findings reveal patterns of device ownership, insights into how…

Ion trap device

Science.gov (United States)

Ibrahim, Yehia M.; Smith, Richard D.

2016-01-26

An ion trap device is disclosed. The device includes a series of electrodes that define an ion flow path. A radio frequency (RF) field is applied to the series of electrodes such that each electrode is phase shifted approximately 180 degrees from an adjacent electrode. A DC voltage is superimposed with the RF field to create a DC gradient to drive ions in the direction of the gradient. A second RF field or DC voltage is applied to selectively trap and release the ions from the device. Further, the device may be gridless and utilized at high pressure.

Metallic spintronic devices

CERN Document Server

Wang, Xiaobin

2014-01-01

Metallic Spintronic Devices provides a balanced view of the present state of the art of metallic spintronic devices, addressing both mainstream and emerging applications from magnetic tunneling junction sensors and spin torque oscillators to spin torque memory and logic. Featuring contributions from well-known and respected industrial and academic experts, this cutting-edge work not only presents the latest research and developments but also: Describes spintronic applications in current and future magnetic recording devicesDiscusses spin-transfer torque magnetoresistive random-access memory (STT-MRAM) device architectures and modelingExplores prospects of STT-MRAM scaling, such as detailed multilevel cell structure analysisInvestigates spintronic device write and read optimization in light of spintronic memristive effectsConsiders spintronic research directions based on yttrium iron garnet thin films, including spin pumping, magnetic proximity, spin hall, and spin Seebeck effectsProposes unique solutions for ...

Educating the Whole Child: Social-Emotional Learning and Ethics Education

Science.gov (United States)

Burroughs, Michael D.; Barkauskas, Nikolaus J.

2017-01-01

Research supporting social and emotional learning (SEL) in schools demonstrates numerous benefits for students, including increased academic achievement and social and emotional competencies. However, research supporting the adoption of SEL lacks a clear conception of "ethical competence." This lack of clarity is problematic for two…

Sealing devices

International Nuclear Information System (INIS)

Coulson, R.A.

1980-01-01

A sealing device for minimising the leakage of toxic or radioactive contaminated environments through a biological shield along an opening through which a flexible component moves that penetrates the shield. The sealing device comprises an outer tubular member which extends over a length not less than the maximum longitudinal movement of the component along the opening. An inner sealing block is located intermediate the length of the component by connectors and is positioned in the bore of the outer tubular member to slide in the bore and effect a seal over the entire longitudinal movement of the component. The cross-section of the device may be circular and the block may be of polytetrafluoroethylene or of nylon impregnated with molybdenum or may be metallic. A number of the sealing devices may be combined into an assembly for a plurality of adjacent longitudinally movable components, each adapted to sustain a tensile load, providing the various drives of a master-slave manipulator. (author)

Impact of Ada and object-oriented design in the flight dynamics division at Goddard Space Flight Center

Science.gov (United States)

Waligora, Sharon; Bailey, John; Stark, Mike

1995-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of applications software. The goals of the SEL are (1) to understand the software development process in the GSFC environment; (2) to measure the effects of various methodologies, tools, and models on this process; and (3) to identify and then to apply successful development practices. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Proceedings of the 19th Annual Software Engineering Workshop

Science.gov (United States)

1994-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of applications software. The goals of the SEL are: (1) to understand the software development process in the GSFC environment; (2) to measure the effects of various methodologies, tools, and models on this process; and (3) to identify and then to apply successful development practices. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that include this document.

Digital limiter for a self-excited loop

International Nuclear Information System (INIS)

Joshi, G.; Singh, P.; Agarwal, V.; Kumar, G.

2015-01-01

Limiter is one of the main signal processing modules of a self-excited loop (SEL). It plays a crucial role in initiating and stabilizing the amplitude of the RF field in a free running SEL. In a recently reported implementation of a self excited loop in digital domain, the limiter has been realized at based band in the form of a feedback loop. This feedback loop stabilizes the amplitude of the RF phasor present at its input without affecting its phase. In the present work we study the suitability of this implementation of limiter through analysis and simulations. An approximate equivalent model of an SEL, incorporating the digital limiter, is created in analog domain. It is demonstrated that even in the presence for large transients, such as, at the start up of oscillations, SEL continues to exhibit smooth and predictable response. In free running mode of operation the coupling from loop oscillation frequency change to resonator field amplitude change is absent, thus avoiding instability due to electro-mechanical coupling. In the locked mode, the transmission of amplitude jitter through the limiter is far exceeded by that through the controller gain thereby keeping the behavior of the digital SEL close to its analog counterpart. (author)

Delay reduction in multi-hop device-to-device communication using network coding

KAUST Repository

Douik, Ahmed S.; Sorour, Sameh; Al-Naffouri, Tareq Y.; Yang, Hong-Chuan; Alouini, Mohamed-Slim

2015-01-01

This paper considers the problem of reducing the broadcast delay of wireless networks using instantly decodable network coding (IDNC) based device-to-device (D2D) communications. In D2D-enabled networks, devices help hasten the recovery of the lost

Temperature indicating device

International Nuclear Information System (INIS)

Angus, J.P.; Salt, D.

1988-01-01

A temperature indicating device comprises a plurality of planar elements some undergoing a reversible change in appearance at a given temperature the remainder undergoing an irreversible change in appearance at a given temperature. The device is useful in indicating the temperature which an object has achieved as well as its actual temperature. The reversible change is produced by liquid crystal devices. The irreversible change is produced by an absorbent surface carrying substances e.g. waxes which melt at predetermined temperatures and are absorbed by the surface; alternatively paints may be used. The device is used for monitoring processes of encapsulation of radio active waste. (author)

Thermal energy storage devices, systems, and thermal energy storage device monitoring methods

Science.gov (United States)

Tugurlan, Maria; Tuffner, Francis K; Chassin, David P.

2016-09-13

Thermal energy storage devices, systems, and thermal energy storage device monitoring methods are described. According to one aspect, a thermal energy storage device includes a reservoir configured to hold a thermal energy storage medium, a temperature control system configured to adjust a temperature of the thermal energy storage medium, and a state observation system configured to provide information regarding an energy state of the thermal energy storage device at a plurality of different moments in time.

NASA Electronic Parts and Packaging (NEPP) Field Programmable Gate Array (FPGA) Single Event Effects (SEE) Test Guideline Update

Science.gov (United States)

Berg, Melanie D.; LaBel, Kenneth A.

2018-01-01

The following are updated or new subjects added to the FPGA SEE Test Guidelines manual: academic versus mission specific device evaluation, single event latch-up (SEL) test and analysis, SEE response visibility enhancement during radiation testing, mitigation evaluation (embedded and user-implemented), unreliable design and its affects to SEE Data, testing flushable architectures versus non-flushable architectures, intellectual property core (IP Core) test and evaluation (addresses embedded and user-inserted), heavy-ion energy and linear energy transfer (LET) selection, proton versus heavy-ion testing, fault injection, mean fluence to failure analysis, and mission specific system-level single event upset (SEU) response prediction. Most sections within the guidelines manual provide information regarding best practices for test structure and test system development. The scope of this manual addresses academic versus mission specific device evaluation and visibility enhancement in IP Core testing.

NASA Electronic Parts and Packaging Field Programmable Gate Array Single Event Effects Test Guideline Update

Science.gov (United States)

Berg, Melanie D.; LaBel, Kenneth A.

2018-01-01

The following are updated or new subjects added to the FPGA SEE Test Guidelines manual: academic versus mission specific device evaluation, single event latch-up (SEL) test and analysis, SEE response visibility enhancement during radiation testing, mitigation evaluation (embedded and user-implemented), unreliable design and its affects to SEE Data, testing flushable architectures versus non-flushable architectures, intellectual property core (IP Core) test and evaluation (addresses embedded and user-inserted), heavy-ion energy and linear energy transfer (LET) selection, proton versus heavy-ion testing, fault injection, mean fluence to failure analysis, and mission specific system-level single event upset (SEU) response prediction. Most sections within the guidelines manual provide information regarding best practices for test structure and test system development. The scope of this manual addresses academic versus mission specific device evaluation and visibility enhancement in IP Core testing.

Search for plutonium salt deposits in the plutonium extraction batteries of the Marcoule plant (1963); Recherche de depots de sels de plutonium dans les batteries d'extraction du plutonium de l'usine de Marcoule (1963)

Energy Technology Data Exchange (ETDEWEB)

Bouzigues, H; Reneaud, J M [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

1963-07-01

This report describes a method and a special apparatus making it possible to detach the insoluble plutonium salt deposits in the extraction chain of an irradiated fuel treatment plant. The process chosen allows the detection, in the extraction batteries or in the highly active chemical engineering equipment, of plutonium quantities of a few grains. After four years operation it has been impossible to detect measurable quantities of plutonium in any part of the extraction chain. The results have been confirmed by visual examinations carried out with a specially constructed endoscope. (authors) [French] Ce rapport decrit une methode et un montage special permettant de detacher les accumulations de sels de plutonium insolubles dans les chaines d'extraction d'une usine de traitement de combustible irradie. Le procede retenu permet de reperer, dans des batteries d'extraction ou dans l'appareillage de genie chimique fortement actif, des masses de plutonium de quelques grammes. Apres quatre annees de fonctionnement, il n'a pas ete possible de deceler des quantites ponderables de plutonium en aucun endroit de la chaine d'extraction. Ces resultats ont ete confirmes par les examens visuels effectues a l'aide d'un endoscope concu specialement pour cet usage. (auteurs)

Polymorphisms in the selenoprotein S gene: lack of association with autoimmune inflammatory diseases

Directory of Open Access Journals (Sweden)

Díaz-Rubio Manuel

2008-07-01

Full Text Available Abstract Background Selenoprotein S (SelS protects the functional integrity of the endoplasmic reticulum against the deleterious effects of metabolic stress. SEPS1/SelS polymorphisms have been involved in the increased release of pro-inflammatory cytokines interleukin (IL-1β, tumor necrosis factor (TNF-α and IL-6 in macrophages. We aimed at investigating the role of the SEPS1 variants previously associated with higher plasma levels of these cytokines and of the SEPS1 haplotypes in the susceptibility to develop immune-mediated diseases characterized by an inflammatory component. Results Six polymorphisms distributed through the SEPS1 gene (rs11327127, rs28665122, rs4965814, rs12917258, rs4965373 and rs2101171 were genotyped in more than two thousand patients suffering from type 1 diabetes, rheumatoid arthritis or inflammatory bowel diseases and 550 healthy controls included in the case-control study. Conclusion Lack of association of SEPS1 polymorphisms or haplotypes precludes a major role of this gene increasing predisposition to these inflammatory diseases.

EPICS GPIB device support

International Nuclear Information System (INIS)

Winans, J.

1993-01-01

A GPIB device support module is used to provide access to the operating parameters of a GPIB device. GPIB devices may be accessed via National Instruments 1014 cards or via Bitbus Universal Gateways. GPIB devices typically have many parameters, each of which may be thought of in terms of the standard types of database records available in EPICS. It is the job of the device support module designer to decide how the mapping of these parameters will be made to the available record types. Once this mapping is complete, the device support module may be written. The writing of the device support module consists primarily of the construction of a parameter table. This table is used to associate the database record types with the operating parameters of the GPIB instrument. Other aspects of module design include the handling of SRQ events and errors. SRQ events are made available to the device support module if so desired. The processing of an SRQ event is completely up to the designer of the module. They may be ignored, tied to event based record processing, or anything else the designer wishes. Error conditions may be handled in a similar fashion

Device Optimization and Transient Electroluminescence Studies of Organic light Emitting Devices

Energy Technology Data Exchange (ETDEWEB)

Lijuan Zou

2003-08-05

Organic light emitting devices (OLEDs) are among the most promising for flat panel display technologies. They are light, bright, flexible, and cost effective. And while they are emerging in commercial product, their low power efficiency and long-term degradation are still challenging. The aim of this work was to investigate their device physics and improve their performance. Violet and blue OLEDs were studied. The devices were prepared by thermal vapor deposition in high vacuum. The combinatorial method was employed in device preparation. Both continuous wave and transient electroluminescence (EL) were studied. A new efficient and intense UV-violet light emitting device was developed. At a current density of 10 mA/cm{sup 2}, the optimal radiance R could reach 0.38 mW/cm{sup 2}, and the quantum efficiency was 1.25%. using the delayed EL technique, electron mobilities in DPVBi and CBP were determined to be {approx} 10{sup -5} cm{sup 2}/Vs and {approx} 10{sup -4} cm{sup 2}/Vs, respectively. Overshoot effects in the transient El of blue light emitting devices were also observed and studied. This effect was attributed to the charge accumulation at the organic/organic and organic/cathode interfaces.

Device Optimization and Transient Electroluminescence Studies of Organic light Emitting Devices

International Nuclear Information System (INIS)

Lijuan Zou

2003-01-01

Organic light emitting devices (OLEDs) are among the most promising for flat panel display technologies. They are light, bright, flexible, and cost effective. And while they are emerging in commercial product, their low power efficiency and long-term degradation are still challenging. The aim of this work was to investigate their device physics and improve their performance. Violet and blue OLEDs were studied. The devices were prepared by thermal vapor deposition in high vacuum. The combinatorial method was employed in device preparation. Both continuous wave and transient electroluminescence (EL) were studied. A new efficient and intense UV-violet light emitting device was developed. At a current density of 10 mA/cm 2 , the optimal radiance R could reach 0.38 mW/cm 2 , and the quantum efficiency was 1.25%. using the delayed EL technique, electron mobilities in DPVBi and CBP were determined to be ∼ 10 -5 cm 2 /Vs and ∼ 10 -4 cm 2 /Vs, respectively. Overshoot effects in the transient El of blue light emitting devices were also observed and studied. This effect was attributed to the charge accumulation at the organic/organic and organic/cathode interfaces

EFEK ZAT AKTIF EKSTRAK DAUN JAMBU BIJI MERAH (PSIDIUM GUAJAVA.L TERHADAP SPERMATOGENESIS PADA TIKUS PUTIH JANTAN (RATTUS NORVEGICUS

Directory of Open Access Journals (Sweden)

Ervi Husni

2016-11-01

Full Text Available Pendahuluan: Jumlah penduduk Indonesia sensus tahun 2010 sebanyak 237,6 juta jiwa dengan laju pertumbuhan penduduk 1,49 % per tahun. Target RPJPMN 2010-2014 sebesar1,14 %, laju pertumbuhan penduduk saat ini  0,53 % masih lebih tinggi. Pengendalian penduduk diperlukan antara lain dengan pemakaian kontrasepsi pada wanita maupun pria. Keterlibatan pria dalam KB masih rendah hanya 6,26 %. Tujuan penelitian untuk membuktikan zat aktif daun jambu biji merah dapat menurunkan kadar FSH dan spermatogenesis pada tikus putih jantan (Rattus norvegikus. Metode: Penelitian ini merupakan penelitian eksperimen dengan rancangan Post test only control group design. Besar sampel menggunakan rumus Federer dengan jumlah sampel 30 ekor tikus putih, terbagi tiga kelompok yaitu Kelompok 1 (K1 kelompok kontrol diberikan larutan CMC 0,5 % 1 ml/ hari, Kelompok Perlakuan 1 (P1 diberikan ekstrak daun jambu biji merah dosis 40 mg/ml/hari dan kelompok Perlakuan 2 (P2 diberikan ekstrak daun jambu biji merah dosis 80 mg/ml/hari dan diberikan selama 30 hari. Variabel penelitian  jumlah sel spermatogenik ( Spermatogonium, Spermatosit primer dan Spermatid. Data dianalisis menggunakan uji  ANOVA. Hasil: Hasil analisis data dengan uji ANOVA jumlah sel spermatogonium nilai p 0,801 (p < 0,05: tidak ada perbedaan signifikan diantara ketiga kelompok, uji LSD tidak dilakukan. Hasil uji ANOVA untuk jumlah sel spermatosit primer didapatkan nilai p 0,102 ( p < 0,05 , berarti  tidak ada perbedaan signifikan diantara ketiga kelompok, uji LSD tidak dilakukan. Hasil uji ANOVA untuk jumlah sel spermatid nilai p 0,001  (p < 0,05 berarti terdapat perbedaan signifikan diantara ketiga kelompok. Hasil uji LSD kontrol dengan P1 (p 0,036 : berbeda, Kontrol dengan P2 (p <0,000: berbeda, P1 dengan P2 (p <0,033 : berbeda. Diskusi: Kesimpulan penelitian ini adalah pemberian ekstrak daun jambu biji merah tidak menurunkan jumlah sel spermatogonium dan sel spermatosit primer tetapi menurunkan jumlah

77 FR 51571 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers...

Science.gov (United States)

2012-08-24

... Music and Data Processing Devices, Computers, and Components Thereof; Notice of Receipt of Complaint... complaint entitled Wireless Communication Devices, Portable Music and Data Processing Devices, Computers..., portable music and data processing devices, computers, and components thereof. The complaint names as...

Integrated control rod monitoring device

International Nuclear Information System (INIS)

Saito, Katsuhiro

1997-01-01

The present invention provides a device in which an entire control rod driving time measuring device and a control rod position support device in a reactor building and a central control chamber are integrated systematically to save hardwares such as a signal input/output device and signal cables between boards. Namely, (1) functions of the entire control rod driving time measuring device for monitoring control rods which control the reactor power and a control rod position indication device are integrated into one identical system. Then, the entire devices can be made compact by the integration of the functions. (2) The functions of the entire control rod driving time measuring device and the control rod position indication device are integrated in a central operation board and a board in the site. Then, the place for the installation of them can be used in common in any of the cases. (3) The functions of the entire control rod driving time measuring device and the control rod position indication device are integrated to one identical system to save hardware to be used. Then, signal input/output devices and drift branching panel boards in the site and the central operation board can be saved, and cables for connecting both of the boards is no more necessary. (I.S.)

Karakteristik Beberapa Jenis Antibiotik Berdasarkan Pola Difraksi Sinar-X (XRD Dan Spektrum FTIR

Directory of Open Access Journals (Sweden)

Mirzan T Razzak

2017-03-01

Full Text Available Telah dilakukan pengukuran karakteristik difraksi sinar-x (XRD terhadap beberapa jenisantibiotik. Penelitian ini bertujuan untuk memahami karakteristik difraksi sinar-x suatuantibiotik sebagai upaya untuk identifikasi antibiotik secara cepat. Dalam penelitian ini diamatikarakteristik difraksi sinar-x dari 15 (lima belas antibiotik yang tersedia di pasaran. SpektrumXRD diukur pada sudut 2 antara 5 – 75 untuk dibandingkan dan dievaluasi mengenai bentukkristalnya. Selanjutnya diukur pula spektrum XRD dari pencampuran antibiotik dengan tepungtapioka. Pengukuran spektrum infrared dengan FTIR juga dilakukan untuk menguji konsistensihasil evaluasi spektrum XRD. Hasil penelitian menunjukkan bahwa amoxicillin dan ampicillinmempunyai struktur kristal yang sama, yaitu orthorombic primitif. Sayangnya baik XRDmaupun FTIR, tidak memberikan nilai kuantitatif pada antibiotik. Oleh sebab itu, perbedaankonsentrasi dengan pencampuran tepung tapioka tidak dapat dideteksi. Walaupun demikian,metode ini terbukti dapat digunakan untuk membedakan komposisi zat penyusun antibiotiksecara cepat dan akurat.

Balanced Scorecard: Perspektif Baru dalam Menilai Kinerja Organisasi

Directory of Open Access Journals (Sweden)

Barbara Gunawan

2015-12-01

Full Text Available Dengan semakin kompleksnya kondisi lingkungan organisasi, diperlukan ukuran-ukuran kinerja yang komprehensif sehingga akan terlihat kondisi berbagai sisi organisasi. Hal tersebut memberikan kejelasan arah dan sasaran bagi organisasi untuk bergerak maju baik dari sisi finansial maupun non finansial secara seimbang. Balanced Scorecard hadir untuk memfasilitasi pengukuran kinerja secara komprehensif baik dari sisi finansial dan sisi perspektif customer, internal business process, dan learning and growth dimana belum bias difasilitasi oleh pengukuran kinerja manajerial. Apabila semua sisi organisasi bias terukur maka organisasi akan dapat dikelola dengan baik seperti ungkapan “If We can count it, we can manage it”. Lebih dari itu Balanced Scorecard juga memberikan penawaran kepada organisasi akan pencapaian keunggulan kompetitif karena dengan terukurnya seluruh aspek organisasi secara komprehensif dan seimbang akan dapat memotivasi “breaktrough improvement” di berbagai bidang seperti: produk, proses, customer, dan pengembangan pasar.

Determination of selenium toxicity to Oreochromis niloticus based on hematological parameters=Determinação da toxicidade do Selênio por meio de análises hematológicas em Oreochromis niloticus

Directory of Open Access Journals (Sweden)

Silmara Regina Siqueira

2012-04-01

Full Text Available Selenium (Se is described as an essential micronutrient and participates in different biological functions, as the antioxidant defense systems maintenance and regulation. However, when in high concentrations, Se may cause toxic effects as well as hematological changes in fish. The aim of the present study was to determine the toxicity of selenium in the form of sodium selenate (Na2Se6+O4 in Oreochromis niloticus based on hematological parameters, after exposure to different concentrations (0.01, 0.14 and 1.4 mg Se6+ L-1. The erythrocytic and leukocytic series were examined over 14 days at intervals of 0, 3, 5, 7,10 and 14 days. The erythrocytic series showed significant alterations in the first 7 days, including the control group. Neutrophils and monocytes showed variations in the first 3 days at a concentration of 1.40 mgSe6+ L-1 characterizing an acute response. The total number of leukocytes was different in relation to time zero on all Se concentrations. The thrombocyte count also differed statistically from time zero and control in the first 3 days at 0.14 mgSe6+ L-1. These results indicate that different concentrations induce an acute response with diminution of total leukocytes, neutrophilia, monocytosis and thrombocytosis.O selênio (Se é descrito como um micronutriente essencial e participa de diversas funções biológicas. No entanto, quando em concentrações elevadas, o Se pode causar efeitos tóxicos, bem como alterações hematológicas em peixes. O objetivo do presente estudo foi determinar a toxicidade do selênio na forma de Selenato de sódio (Na2Se6+O4 em Oreochromis niloticus com base em parâmetros hematológicos, após a exposição a diferentes concentrações (0,01, 0,14 e 1,4 mg + Se6+ L-1. A série eritrocitária e leucocitária foram examinadas por 14 dias, em intervalos de 0, 3, 5, 7,10 e 14 dias. A série eritrocítica mostrou alterações significativas nos primeiros 7 dias, incluindo o grupo controle. Neutr

76 FR 45860 - In the Matter of Certain Electronic Devices, Including Wireless Communication Devices, Portable...

Science.gov (United States)

2011-08-01

..., Including Wireless Communication Devices, Portable Music and Data Processing Devices, and Tablet Computers... electronic devices, including wireless communication devices, portable music and data processing devices, and...''). The complaint further alleges that an industry in the United States exists or is in the process of...

Medical devices; exemption from premarket notification; class II devices; wheelchair elevator. Final order.

Science.gov (United States)

2013-03-04

The Food and Drug Administration (FDA) is publishing an order granting a petition requesting exemption from premarket notification requirements for wheelchair elevator devices commonly known as inclined platform lifts and vertical platform lifts. These devices are used to provide a means for a person with a mobility impairment caused by injury or other disease to move from one level to another, usually in a wheelchair. This order exempts wheelchair elevators, class II devices, from premarket notification and establishes conditions for exemption for this device that will provide a reasonable assurance of the safety and effectiveness of the device without submission of a premarket notification (510(k)). This exemption from 510(k), subject to these conditions, is immediately in effect for wheelchair elevators. All other devices classified under FDA's wheelchair elevator regulations, including attendant-operated stair climbing devices for wheelchairs and portable platform lifts, continue to require submission of 510(k)s. FDA is publishing this order in accordance with the section of the Food, Drug, and Cosmetic Act (the FD&C Act) permitting the exemption of a device from the requirement to submit a 510(k).

An Observation Tool for Monitoring Social Skill Implementation in Contextually Relevant Environments

Science.gov (United States)

Morgan, Joseph John; Hsiao, Yun-Ju; Dobbins, Nicole; Brown, Nancy B.; Lyons, Catherine

2015-01-01

Skills related to social-emotional learning (SEL) are essential for college and career readiness. Failure to use appropriate skills for SEL in school is often linked to several negative academic outcomes, including rejection by school community members, academic deficits, and higher rates of problematic behavior. Social skills interventions are…

Design, Development, and Automated Verification of an Integrity-Protected Hypervisor

Science.gov (United States)

2012-07-16

also require considerable manual effort. For example, the verification of the SEL4 operating system [45] required several man years effort. In...Winwood. seL4 : formal verification of an OS kernel. In Proc. of SOSP, 2009. [46] K. Kortchinsky. Cloudburst: A VMware guest to host escape story

The Impact of Trial Stage, Developer Involvement and International Transferability on Universal Social and Emotional Learning Programme Outcomes: A Meta-Analysis

Science.gov (United States)

Wigelsworth, M.; Lendrum, A.; Oldfield, J.; Scott, A.; ten Bokkel, I.; Tate, K.; Emery, C.

2016-01-01

This study expands upon the extant prior meta-analytic literature by exploring previously theorised reasons for the failure of school-based, universal social and emotional learning (SEL) programmes to produce expected results. Eighty-nine studies reporting the effects of school-based, universal SEL programmes were examined for differential effects…

PENGUKURAN KONSERVATISME AKUNTANSI: SEBUAH LITERATUR REVIEW

Directory of Open Access Journals (Sweden)

Anggita Langgeng

2012-12-01

Full Text Available This research is a study of the literature that discusses the measurement of accounting conservatism. Research about accounting conservatism raises several alternative methods that can be used to measure the level of accounting conservatism in a company. With reference to some previous literature it can be conclude that conservatism can be measured by several methods, including: 1 the market model of Basu (1997, 2 market to book ratio approach, 3 operating income approach, 4 the accrual of cash flow approach, 5 non-operating accrual approach.

PENGUKURAN BIAYA KUALITAS : SUATU PARADIGMA ALTERNATIF

Directory of Open Access Journals (Sweden)

Monika Kussetya Ciptani

1999-01-01

Full Text Available Improving quality is an essential thing for a company to exist in the business competitive world. It's not time for a company to focus only on a high sales volume, but it's time for a company to focus on customer satisfaction. If the company can give customer satisfaction through their product, they will achieve maximum profit automatically. They are many method techniques to identify quality cost appeared in a company. It is very easy to control quality cost in a company if they are accounting data about it. But it will be very difficult to control the quality cost if the cost is hidden and can not be seen on accounting data. Variety techniques have been developed to solve this hidden quality cost. One of these method is Taguchi Method. By using Taguchi Method, a company will be helped to control and estimate quality cost especially hidden quality cost. Abstract in Bahasa Indonesia : Peningkatan Kualitas merupakan suatu hal yang paling esensial bagi suatu perusahaan untuk tetap eksis dalam dunia bisnis yang competitif ini. Kini sudah tidak jamannya lagi perusahaan hanya mementingkan volume penjualan yang begitu besar untuk mencapai keuntungan yang maksimal, tetapi lebih berorientasi pada aspek kepuasan konsumen. Dengan adanya kemampuan perusahaan untuk memberikan kepuasan terhadap konsumen yang membeli produknya, maka secara otomatis perusahaan akan mencapai keuntungan yang maksimal. Oleh karena itu dikembangkan berbagai cara dan teknik untuk mengidentifikasi besarnya biaya kualitas (kerugian yang muncul akibat barang yang dihasilkan menyimpang dari standar suatu perusahaan. Apabila biaya kualitas yang muncul tersebut nampak dalam catatan akuntansi perusahaan yang bersangkutan, maka perusahaan akan lebih mudah melakukan pengendalian, tetapi apabila biaya kualitas tersebut sifatnya tersembunyi, maka akan lebih sulit untuk melakukan pengendalian dan estimasi. Berbagai teknik telah dikembangkan untuk memecahkan masalah Hidden Quality Cost ini. Salah satu metode yang populer adalah dengan menggunakan metode Taguchi. Dengan metode Taguchi ini akan membantu perusahaan dalam melakukan pengendalian dan estimasi khususnya terhadap biaya kualitas yang tersembunyi. Kata kunci : biaya kualitas, biaya kualitas tersembunyi, metode Taguchi

PENGUKURAN AKTFITAS FISIK PADA USIA LANJUT

Directory of Open Access Journals (Sweden)

Dien GA Nursa

2008-09-01

Full Text Available Kehilangan fungsi pada Usia lanjut merupakan tahapan akhir dari berbagai penyakit yang dialami Usia lanjut. Kemunduran fungsional berarti menurunnya kemampuan untuk memenuhi kebutuhan pribadi dan hal ini dapat diukur dengan menilaiADL (Activity Daily Life, termasuk didalamnya mobility, eating, toileting, dressing, grooming. Halini dapat pula dilanjutkan dengan memeriksa aktivitas tambahan sehari-hari IADL seperti berbelanja, pergi ke bank, memasak, menyetir, membersihkan rumah atau menggunakan fasilitas kendaraan umum. Sebagai tambahan, pemeriksaan objektif dari fungsi kognitif dan perilaku serta ekonomi, sosial, emosionaljuga dibutuhkan untuk memperoleh data yang lengkap mengenai fungsi tubuh yang berhubungan dengan kesehatan pada Usia lanjut.

PENGUKURAN TINGKAT KEBISINGAN PADA KAPAL COASTER

Directory of Open Access Journals (Sweden)

Eko Julianto Sasono

2012-03-01

Full Text Available The noise on the ship is a fitness factor. When it is over, can effect the healthy and concentration of crews, finally it can effect safety of ships. The rules of noise level for commercial ship is inserted in ”Code on noise levels on board ships” of IMO. The noise level evaluate of Coaster ship have done when the main machine speed is 85 % MCR. The evaluate used Noise Onsoku of equipment. The navigation when it was evaluated was sea trial. As a result, the noise level of Coaster ship is still get the specification of IMO codes.

Fusion devices

International Nuclear Information System (INIS)

Fowler, T.K.

1977-01-01

Three types of thermonuclear fusion devices currently under development are reviewed for an electric utilities management audience. Overall design features of laser fusion, tokamak, and magnetic mirror type reactors are described and illustrated. Thrusts and trends in current research on these devices that promise to improve performance are briefly reviewed. Twenty photographs and drawings are included

High voltage MOSFET devices and methods of making the devices

Science.gov (United States)

Banerjee, Sujit; Matocha, Kevin; Chatty, Kiran

2018-06-05

A SiC MOSFET device having low specific on resistance is described. The device has N+, P-well and JFET regions extended in one direction (Y-direction) and P+ and source contacts extended in an orthogonal direction (X-direction). The polysilicon gate of the device covers the JFET region and is terminated over the P-well region to minimize electric field at the polysilicon gate edge. In use, current flows vertically from the drain contact at the bottom of the structure into the JFET region and then laterally in the X direction through the accumulation region and through the MOSFET channels into the adjacent N+ region. The current flowing out of the channel then flows along the N+ region in the Y-direction and is collected by the source contacts and the final metal. Methods of making the device are also described.

High voltage MOSFET devices and methods of making the devices

Science.gov (United States)

Banerjee, Sujit; Matocha, Kevin; Chatty, Kiran

2015-12-15

A SiC MOSFET device having low specific on resistance is described. The device has N+, P-well and JFET regions extended in one direction (Y-direction) and P+ and source contacts extended in an orthogonal direction (X-direction). The polysilicon gate of the device covers the JFET region and is terminated over the P-well region to minimize electric field at the polysilicon gate edge. In use, current flows vertically from the drain contact at the bottom of the structure into the JFET region and then laterally in the X direction through the accumulation region and through the MOSFET channels into the adjacent N+ region. The current flowing out of the channel then flows along the N+ region in the Y-direction and is collected by the source contacts and the final metal. Methods of making the device are also described.

Fuel pattern recognition device

International Nuclear Information System (INIS)

Sato, Tomomi.

1995-01-01

The device of the present invention monitors normal fuel exchange upon fuel exchanging operation carried out in a reactor of a nuclear power plant. Namely, a fuel exchanger is movably disposed to the upper portion of the reactor and exchanges fuels. An exclusive computer receives operation signals of the fuel exchanger during operation as inputs, and outputs reactor core fuel pattern information signals to a fuel arrangement diagnosis device. An underwater television camera outputs image signals of a fuel pattern in the reactor core to an image processing device. If there is any change in the image signals for the fuel pattern as a result of the fuel exchange operation of the fuel exchanger, the image processing device outputs the change as image signals to the fuel pattern diagnosis device. The fuel pattern diagnosis device compares the pattern information signals from the exclusive computer with the image signals from the image processing device, to diagnose the result of the fuel exchange operation performed by the fuel exchanger and inform the diagnosis by means of an image display. (I.S.)

77 FR 58576 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers...

Science.gov (United States)

2012-09-21

... Devices, Portable Music and Data Processing Devices, Computers, and Components Thereof; Institution of... communication devices, portable music and data processing devices, computers, and components thereof by reason... alleges that an industry in the United States exists as required by subsection (a)(2) of section 337. The...

Firewood preparation devices in 1994

International Nuclear Information System (INIS)

Mutikainen, A.

1994-01-01

A review of the market situation regarding firewood preparation devices is presented. The information was collected from the answers to a mail questionnaire. The review is assumed to include all the leading manufacturers and importers. Firewood production devices were available from 26 manufacturers. The range of models amounted to over 70. These may be divided into three categories: 1. cutting devices: the most common solution being a cross-cutting circular saw. There were only a few of these on sale as it is quite easy to include a splitting device on the same frame. 2. Splitting devices: e.g. screw splitter and hydraulically powered splitter. About 20 models are available on the markets. Cross cutting and splitting devices: these are the most popular devices. A cross-cutting circular saw with screw or hydraulic splitter is the most common type. There are about 50 models available on the markets. Cross-cutting and splitting devices are often equipped with conveyor for transferring the split wood e.g. into a trailer. Chopping devices are delivered as tractor powered devices, as electric motor powered devices or as combustion engine powered devices. Some of them are equipped with a time saving feeding device enabling the next stem to be lifted into position while the previous one is being chopped. The Finnish Work Efficiency Institute's studies show that when cross-cutting and splitting of stems into pieces of 35-50 cm in length, productivity for one operator varies in between 0.8 - 3.2 m 3 /h, depending on the device and work method used. (6 refs., 1 fig., 2 tabs.)

Software process improvement in the NASA software engineering laboratory

Science.gov (United States)

Mcgarry, Frank; Pajerski, Rose; Page, Gerald; Waligora, Sharon; Basili, Victor; Zelkowitz, Marvin

1994-01-01

The Software Engineering Laboratory (SEL) was established in 1976 for the purpose of studying and measuring software processes with the intent of identifying improvements that could be applied to the production of ground support software within the Flight Dynamics Division (FDD) at the National Aeronautics and Space Administration (NASA)/Goddard Space Flight Center (GSFC). The SEL has three member organizations: NASA/GSFC, the University of Maryland, and Computer Sciences Corporation (CSC). The concept of process improvement within the SEL focuses on the continual understanding of both process and product as well as goal-driven experimentation and analysis of process change within a production environment.

Procedimiento para aumentar la velocidad de obtención de biodiesel mediante su incorporación como aditivo

OpenAIRE

López Granados, Manuel; Mariscal López, Rafael; Martín Alonso, David; Bretes García, Pilar

2008-01-01

Procedimiento para aumentar la velocidad de obtención de biodiésel mediante su incorporación como aditivo. La presente invención se refiere al uso de biodiésel como aditivo para aumentar la velocidad de reacción en reacciones de transesterificación catalítica con alcoholes y para proteger a los catalizadores del contacto con el CO{sub,2} y H{sub,2}O atmosféricos. De forma más concreta, en esta invención se describe un procedimiento de obtención de biodiésel a partir de la transesterificación ...

Flaw detection device

International Nuclear Information System (INIS)

Sasahara, Toshihiko

1998-01-01

The present invention provides a device for detecting welded portions of a reactor pressure vessel. Namely, the device of the present invention comprises (1) a casing to be disposed on the surface to be detected, (2) a probe driving means loaded to the casing, (3) a probe driven along the surface to be detected and (4) a pressure reduction means for keeping the hollow portion in the casing to an evacuated atmosphere. The casing comprises a flexible suction edge to be tightly in contact with the surface to be tested for maintaining the air tight state, (6) a guide wheel for moving the casing along the surface to be tested and (7) a handle for performing transferring operation. The flaw detection device thus constituted has following features. The working efficiency upon conducting detection is improved. The influence of the weight of the device on the detection is small. The device can be applied on the surface of a nonmagnetic material. The efficiency for the flaw detection can be improved. (I.S.)

Fuel inspection device

International Nuclear Information System (INIS)

Tsuji, Tadashi.

1990-01-01

The fuel inspection device of the present invention has a feature of obtaining an optimum illumination upon fuel rod interval inspection operation in a fuel pool. That is, an illumination main body used underwater is connected to a cable which is led out on a floor. A light control device is attached to the other end of the cable and an electric power cable is connected to the light control device. A light source (for example, incandescent lamp) is incorporated in the casing of the illumination main body, and a diffusion plate is disposed at the front to provide a plane light source. The light control device has a light control knob capable of remote-controlling the brightness of the light of the illumination main body. In the fuel inspection device thus constituted, halation is scarcely caused on the image screen upon inspection of fuels by a submerged type television camera to facilitate control upon inspection. Accordingly, efficiency of the fuel inspection can be improved to shorten the operation time. (I.S.)

Medical Devices; Immunology and Microbiology Devices; Classification of the Device To Detect and Identify Microbial Pathogen Nucleic Acids in Cerebrospinal Fluid. Final order.

Science.gov (United States)

2017-10-20

The Food and Drug Administration (FDA or we) is classifying the device to detect and identify microbial pathogen nucleic acids in cerebrospinal fluid into class II (special controls). The special controls that will apply to the device type are identified in this order and will be part of the codified language for the device to detect and identify microbial pathogen nucleic acids in cerebrospinal fluid’s classification. We are taking this action because we have determined that classifying the device into class II (special controls) will provide a reasonable assurance of safety and effectiveness of the device. We believe this action will also enhance patients' access to beneficial innovative devices, in part by reducing regulatory burdens.

Smart devices are different

DEFF Research Database (Denmark)

Stisen, Allan; Blunck, Henrik; Bhattacharya, Sourav

2015-01-01

research results. This is due to variations in training and test device hardware and their operating system characteristics among others. In this paper, we systematically investigate sensor-, device- and workload-specific heterogeneities using 36 smartphones and smartwatches, consisting of 13 different...... device models from four manufacturers. Furthermore, we conduct experiments with nine users and investigate popular feature representation and classification techniques in HAR research. Our results indicate that on-device sensor and sensor handling heterogeneities impair HAR performances significantly...

Rooting an Android Device

Science.gov (United States)

2015-09-01

1. Overview The purpose of this document is to demonstrate how to gain administrative privileges on an Android device. The term “rooting” is...is applicable for the Samsung Galaxy S3 as well as many other Android devices, but there are several steps involved in rooting an Android device (as...root access has been granted. 4. Conclusion This document serves as a tutorial on how to grant user administrative privilege to an Android device by

Sadhana | Indian Academy of Sciences

Indian Academy of Sciences (India)

compacting repair mortars · Selçuk Türkel Yiğit Altuntaş · More Details Abstract Fulltext PDF ... A comparative study on the use of fly ash and phosphogypsum in the brick production · Selçuk Türkel Emrah Aksin · More Details Abstract Fulltext PDF.

Analysis of Conserved Structural Features of Selenoprotein K | Al ...

African Journals Online (AJOL)

Selenium plays important roles in human health and these roles may be exerted through its presence in selenoproteins. Among the 25 selenoproteins in human is selenoprotein K (SelK) whose exact function is still unclear. Here, we investigated the conserved structural features of SelK using bioinformatics as an approach ...

"Absent Fathers", and Children's Social and Emotional Learning: An Exploration of the Perceptions of "Positive Male Role Models" in the Primary School Sector

Science.gov (United States)

Wood, Peter; Brownhill, Simon

2018-01-01

This paper focuses on the testimonies of three male primary school staff members who utilised social and emotional learning (SEL) in their everyday practice within their respective schools. The data, collected through individual interviews, illustrate how these three men interpreted SEL, and their role in the development of children's social,…

A Social-Ecological Approach to Addressing Emotional and Behavioral Problems in Schools: Focusing on Group Processes and Social Dynamics

Science.gov (United States)

Trach, Jessica; Lee, Matthew; Hymel, Shelley

2018-01-01

A substantial body of evidence verifies that social-emotional learning (SEL) can be effectively taught in schools and can reduce the prevalence and impact of emotional and behavioral problems (EBP) among children and youth. Although the positive effects of SEL on individual student's emotional, behavioral, and academic outcomes have been…

Novel Magnetic Devices

National Research Council Canada - National Science Library

Schuller, Ivan

2007-01-01

...: ballistic magnetoresistance, magnetic field proximity effect and spin drag. These three phenomena would then be exploited for the design of novel device architectures and to investigate the physical principles behind these devices...

Evaluating imaging devices

International Nuclear Information System (INIS)

Rollo, F.D.

1977-01-01

The performance of any imaging device depends on two principal factors inherent to the device, namely, plane sensitivity and spatial resolution. These factors may be defined as follows: plane sensitivity is the counts per second recorded by the imaging device for each disintegration per second per square centimeter occurring within a plane sheet of radioactivity. Spatial resolution may be defined as the fidelity with which the imaging device reproduces the activity distribution of an object in the image plane. In all imaging devices, a trade-off exists between these two parameters; that is, as sensitivity improves, spatial resolution is degraded, and vice versa. Therefore, to fully evaluate an imaging system a technique should be selected that measures both parameters and reflects the trade-off between the two. In addition, the method should approximate the clinical problem, namely, the detection of a focal lesion within an activity distribution. Several methods have been described to evaluate nuclear imaging devices. The more common techniques include the use of organ phantoms, bar phantoms, line-spread functions, modulation transfer functions, contrast efficiency functions, and performance index functions. Each of these techniques is briefly described in this chapter, and their advantages and disadvantages are discussed. In addition, a phantom that can be used to simply and completely measure overall imaging system performance is described

Ergonomic material-handling device

Science.gov (United States)

Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

2004-08-24

A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

KAJIAN INDUKSI KALUS RUMPUT LAUT Kappaphycus alvarezii UNTUK PRODUKSI EMBRIO SOMATIK

Directory of Open Access Journals (Sweden)

Muh. Alias L. Rajamuddin

2016-11-01

Full Text Available Untuk mendukung program transgenesis pada rumput laut, embrio somatik dapat digunakan sebagai material untuk transfer gen baik secara individu sel ataupun kluster sel embriogenik, sehingga mempercepat keberhasilan dengan peluang transformasi yang lebih tinggi. Penelitian ini bertujuan untuk mengkaji induksi kalus rumput laut K. alvarezii untuk produksi sel embrio somatik (e.s. dengan beberapa rasio zat pengatur tumbuh (ZPT dan konsentrasi agar media induksi, sampai sel menjadi filamen. Penelitian terdiri atas dua tahap: Tahap (1 induksi kalus, dengan rasio ZPT asam indol asetat (IAA:kinetin = 0,5:0,0 mg/L; 1,0:1,0 mg/L; dan 2,0:0,2 mg/L dengan konsentrasi agar media induksi = 0,6%; 0,8%; 1,0%; dan 1,5%. Tahap (2 regenerasi massa sel e.s., dengan rasio IAA:kinetin = 0,1:1,0 mg/L; 0,0:0,1 mg/L dan tanpa ZPT dengan konsentrasi agar media = 0,4%; 0,6%; dan 0,8%. Untuk perkembangan sel-sel e.s. lebih lanjut dipelihara pada kultur cair. Hasil penelitian menunjukkan pada tahap induksi kalus, rasio IAA: kinetin = 1:1 mg/L dengan konsentrasi agar media 0,8% dan 1,0% menghasilkan persentase induksi kalus tertinggi (90%. Pada tahap regenerasi massa sel e.s., ZPT tidak berpengaruh terhadap perkembangan massa sel e.s., di mana tanpa ZPT dengan konsentrasi agar 0,6% memperlihatkan perkembangan tertinggi (rata-rata diameter massa sel 5 mm. Pada media cair, perkembangan sel e.s. dari single cell ukuran 3-4 mm menjadi filamen-filamen ukuran rata-rata 0,5 mm dapat dicapai dalam satu bulan kultur. Keberhasilan produksi sel e.s. K. alvarezii, selain sebagai material untuk transfer gen juga dapat dijadikan acuan dalam produksi benih rumput laut kultur jaringan. To support the program of seaweed transgenesis, somatic embryo can be used as a materials for gene transfer purpose either by individual or cluster of cells in accelerating the higher rate of transformation. This research aims to study the callus induction of seaweed K. alvarezii for production of somatic

Materials for electrochemical device safety

Science.gov (United States)

Vissers, Daniel R.; Amine, Khalil; Thackeray, Michael M.; Kahaian, Arthur J.; Johnson, Christopher S.

2015-04-07

An electrochemical device includes a thermally-triggered intumescent material or a gas-triggered intumescent material. Such devices prevent or minimize short circuits in a device that could lead to thermal run-away. Such devices may include batteries or supercapacitors.

[Nutritional status, food consumption and physical activity in female school children of different socioeconomic levels from Santiago, Chile].

Science.gov (United States)

Olivares C, Sonia; Bustos Z, Nelly; Lera M, Lydia; Zelada, María Eugenia

2007-01-01

A high prevalence of obesity is the main public health problem in Chilean school children. To compare the nutritional status, consumption of selected foods and extracurricular physical activity (PA) habits in school children of different socioeconomic levels as a baseline for developing effective educational interventions. Cross-sectional study that determined the body mass index, food consumption and physical activity with previously validated instruments in 202 and 358 girls from 3rd to 8th grade in schools of medium-high and low socioeconomic level (SEL) from Santiago, Chile, respectively. Compared to their counterparts of low socioeconomic level (SEL), the prevalence of obesity was significantly lower in 8-9 year-old girls of medium high SEL (19% and 9%, respectively, p =0.012) and 12-13 year-old (12% and 2.5% respectively, p =0.008). Also median daily intake of dairy products was higher in girls of medium high SEL (250 and 470 ml/day, respectively). The intake of fruits and vegetables was similar (200 g/d); and the intake of bread was lower (230 and 70 g/day, respectively, p Consumption of energy-dense foods was lower in 10-13 year-old girls of medium high SEL (80 and 50 g/day, respectively, p food and PA habits and to promote an environment that enhances healthy behaviors.

Recovery of barotrauma injuries in Chinook salmon, Oncorhynchus tshawytscha from exposure to pile driving sound.

Directory of Open Access Journals (Sweden)

Brandon M Casper

Full Text Available Juvenile Chinook salmon, Oncorhynchus tshawytscha, were exposed to simulated high intensity pile driving signals to evaluate their ability to recover from barotrauma injuries. Fish were exposed to one of two cumulative sound exposure levels for 960 pile strikes (217 or 210 dB re 1 µPa(2·s SEL(cum; single strike sound exposure levels of 187 or 180 dB re 1 µPa(2⋅s SEL(ss respectively. This was followed by an immediate assessment of injuries, or assessment 2, 5, or 10 days post-exposure. There were no observed mortalities from the pile driving sound exposure. Fish exposed to 217 dB re 1 µPa(2·s SEL(cum displayed evidence of healing from injuries as post-exposure time increased. Fish exposed to 210 dB re 1 µPa(2·s SEL(cum sustained minimal injuries that were not significantly different from control fish at days 0, 2, and 10. The exposure to 210 dB re 1 µPa(2·s SEL(cum replicated the findings in a previous study that defined this level as the threshold for onset of injury. Furthermore, these data support the hypothesis that one or two Mild injuries resulting from pile driving exposure are unlikely to affect the survival of the exposed animals, at least in a laboratory environment.

Preparation of C{sup 14}-labelled tetrazolium salts and tracer study of the tetrazene-formazan rearrangement; Preparation de sels de tetrazolium marques au carbone-14 et etude de la transposition tetrazene-formazan, au moyen d'indicateurs radioactifs; Izgotovlenie mechennykh C{sup 14} solej tetrazosoedinenij i issledovanie pri pomoshchi indikatorov peregruppirovok tetrazona-formazana; Preparacion de sales de tetrazolio marcadas con {sup 14}C y estudio de la transposicion tetraceno-formazan con ayuda de trazadores

Energy Technology Data Exchange (ETDEWEB)

Marton, Joseph; Meisel, Julia [Central Research Institute for Chemistry of the Hungarian Academy of Sciences, Budapest (Hungary); Gosztonyi, Thomas [Institute of Organic Chemical Technology, Technical University, Budapest (Hungary)

1962-03-15

The preparation of [5-C{sup 14}]-TTC, [5, 5'-di-C{sup 14}]NT (neotetrazolium) and [5, 5'-di-C{sup 14}]-BT (tetrazolium blue) starting from benzaldehyde- [1-C{sup 14}] has been accomplished. The yields for both mono- and ditetrazolium salts are high, and the products can be obtained with high sp. activity. The purity of the samples was investigated by paper chromatography. In the case of ditetrazolium salts some impurities could be detected and conclusions drawn as to their structure and quantity. A method has been developed to prepare C{sup 14}- labelled ditetrazolium salts of high purity. The formation of the formazan, the precursor of the tetrazolium salt, goes through an unstable intermediate of tetrazene-type structure which rearranges rapidly in basic medium, to yield the formazan. The tetrazene intermediate can be isolated under suitable conditions. By using C{sup 14}-labelled benzaldehyde phenylhydrazone this rearrangement was investigated and a verification of its intramolecular character given. (author) [French] On a procede a la preparation de [5-C{sup 14}]-TTC, de [5,5'-di-C{sup 14}] NT (neotetrazolium) et de [5,5'-di-C{sup 14}]-VT (bleu de tetrazolium), en partant du benzaldehyde-[1-C{sup 14}]. On a pu obtenir un grand rendement, tant pour les sels de monotetrazolium que pour les sels de ditetrazolium, et des produits d'une activite specifique elevee. La purete des echantillons a ete examinee par chromatographie sur papier. Dans le cas des sels de ditetrazolium, on a pu deceler quelques impuretes et tirer des conclusions quant a leur structure et quantite. On a mis au point une methode permettant de preparer des sels de ditetrazolium marques au carbone-14 et presentant une grande purete. Dans la synthese du formazan, precurseur du sel de tetrazolium, on obtient un produit intermediaire instable d'une structure analogue a celle du tetrazene; ce produit se transforme rapidement en milieu alcalin pour donner du formazan. Le tetrazene intermediaire peut

Heterostructures and quantum devices

CERN Document Server

Einspruch, Norman G

1994-01-01

Heterostructure and quantum-mechanical devices promise significant improvement in the performance of electronic and optoelectronic integrated circuits (ICs). Though these devices are the subject of a vigorous research effort, the current literature is often either highly technical or narrowly focused. This book presents heterostructure and quantum devices to the nonspecialist, especially electrical engineers working with high-performance semiconductor devices. It focuses on a broad base of technical applications using semiconductor physics theory to develop the next generation of electrical en

Plasma shutdown device

International Nuclear Information System (INIS)

Hosogane, Nobuyuki; Nakayama, Takahide.

1985-01-01

Purpose: To prevent concentration of plasma currents to the plasma center upon plasma shutdown in a torus type thermonuclear device by the injection of fuels to the plasma center thereby prevent plasma disruption at the plasma center. Constitution: The plasma shutdown device comprises a plasma current measuring device that measures the current distribution of plasmas confined within a vacuum vessel and outputs a control signal for cooling the plasma center when the plasma currents concentrate to the plasma center and a fuel supply device that supplies fuels to the plasma center for cooling the center. The fuels are injected in the form of pellets into the plasmas. The direction and the velocity of the injection are set such that the pellets are ionized at the center of the plasmas. (Horiuchi, T.)

Photovoltaic device and method

Science.gov (United States)

Cleereman, Robert J; Lesniak, Michael J; Keenihan, James R; Langmaid, Joe A; Gaston, Ryan; Eurich, Gerald K; Boven, Michelle L

2015-01-27

The present invention is premised upon an improved photovoltaic device ("PVD") and method of use, more particularly to an improved photovoltaic device with an integral locator and electrical terminal mechanism for transferring current to or from the improved photovoltaic device and the use as a system.

Analisis Kinerja Subscriber Station WiMAX di Urban Area Bandung

Directory of Open Access Journals (Sweden)

DWI ARYANTA

2017-06-01

Full Text Available ABSTRAK   Teknologi komunikasi wireless semakin pesat mengalami perkembangan. WiMAX  merupakan suatu teknologi broadband yang didukung oleh standar IEEE 802.16d (802.16-2004 yang mampu memberikan layanan data berkecepatan tinggi hingga 75 Mbps dalam radius maksimal 40-50 km pada bandwidth 20 MHz. Alokasi frekuensi yang dipakai Indonesia untuk jaringan WiMAX  ini ialah 3,3 – 3,4 GHz. Penelitian ini dilakukan dengan melakukan proses pengukuran kinerja perangkat radio WiMAX  yaitu HiMax 331-SS. Proses pengukuran dilakukan antara CPE dan base station dengan antenna sektoral 1200 pada ketinggian 45 m. Lokasi pengukuran dilakukan di beberapa area kota Bandung yang telah ditentukan sebelumnya. Hasil pengukuran memperlihatkan nilai CINR tertinggi adalah 31 dB dengan modulasi 64 QAM – ¾ dan terendah nilai 10 dB dengan modulasi BPSK 1/2. Nilai RSSI tertinggi -54 dBm berada dan nilai RSSI terendah -89 dBm. Nilai throughput tertinggi untuk layanan streaming video sebesar  1000,8 kbps (downlink dengan modulasi 64 QAM – ¾. Nilai delay terendah sebesar 56,247 ms pada kondisi LOS dan tertinggi sebesar 139,5 ms pada kondisi NLOS. Nilai terbesar packet loss sebesar 20% yaitu pada lokasi pengukuran terjauh 14,3 km. Kata Kunci : delay, packet loss, RSSI, CINR, throughput, CPE, WiMAX .   ABSTRACT   Wireless communication technologies have evolved more rapidly. WiMAX  is a broadband technology that is supported by the IEEE standard 802.16-2004/d which is able to provide high speed data services of up to 75 Mbps within a radius of 40-50 km at a maximum bandwidth of 20 MHz. Indonesia frequency allocation used for the WiMAX  network is 3.3 to 3.4 GHz. This study was conducted with the performance measurement process that is Himax 331 WiMAX  radio - SS. Process measurement is made between the CPE and base station sector antennas at a height of 45 m in 1200. Locations measurements performed in several areas of Bandung predetermined. The measurement

Magnet-assisted device-level alignment for the fabrication of membrane-sandwiched polydimethylsiloxane microfluidic devices

International Nuclear Information System (INIS)

Lu, J-C; Liao, W-H; Tung, Y-C

2012-01-01

Polydimethylsiloxane (PDMS) microfluidic device is one of the most essential techniques that advance microfluidics research in recent decades. PDMS is broadly exploited to construct microfluidic devices due to its unique and advantageous material properties. To realize more functionalities, PDMS microfluidic devices with multi-layer architectures, especially those with sandwiched membranes, have been developed for various applications. However, existing alignment methods for device fabrication are mainly based on manual observations, which are time consuming, inaccurate and inconsistent. This paper develops a magnet-assisted alignment method to enhance device-level alignment accuracy and precision without complicated fabrication processes. In the developed alignment method, magnets are embedded into PDMS layers at the corners of the device. The paired magnets are arranged in symmetric positions at each PDMS layer, and the magnetic attraction force automatically pulls the PDMS layers into the aligned position during assembly. This paper also applies the method to construct a practical microfluidic device, a tunable chaotic micromixer. The results demonstrate the successful operation of the device without failure, which suggests the accurate alignment and reliable bonding achieved by the method. Consequently, the fabrication method developed in this paper is promising to be exploited to construct various membrane-sandwiched PDMS microfluidic devices with more integrated functionalities to advance microfluidics research. (paper)

Hot gas handling device and motorized vehicle comprising the device

NARCIS (Netherlands)

Klein Geltink, J.; Beukers, A.; Van Tooren, M.J.L.; Koussios, S.

2012-01-01

The invention relates to a device for handling hot exhaust gasses discharged from an internal combustion engine. The device comprises a housing (2), enclosing a space (3) for transporting the exhaust gasses. The housing (2) is provided with an entrance - opening (4) for the exhaust gasses discharged

Implantable Medical Devices

Science.gov (United States)

... Artery Disease Venous Thromboembolism Aortic Aneurysm More Implantable Medical Devices Updated:Sep 16,2016 For Rhythm Control ... a Heart Attack Introduction Medications Surgical Procedures Implantable Medical Devices • Life After a Heart Attack • Heart Attack ...

Output hardcopy devices

CERN Document Server

Durbeck, Robert

1988-01-01

Output Hardcopy Devices provides a technical summary of computer output hardcopy devices such as plotters, computer output printers, and CRT generated hardcopy. Important related technical areas such as papers, ribbons and inks, color techniques, controllers, and character fonts are also covered. Emphasis is on techniques primarily associated with printing, as well as the plotting capabilities of printing devices that can be effectively used for computer graphics in addition to their various printing functions. Comprised of 19 chapters, this volume begins with an introduction to vector and ras

Powering biomedical devices

CERN Document Server

Romero, Edwar

2013-01-01

From exoskeletons to neural implants, biomedical devices are no less than life-changing. Compact and constant power sources are necessary to keep these devices running efficiently. Edwar Romero's Powering Biomedical Devices reviews the background, current technologies, and possible future developments of these power sources, examining not only the types of biomedical power sources available (macro, mini, MEMS, and nano), but also what they power (such as prostheses, insulin pumps, and muscular and neural stimulators), and how they work (covering batteries, biofluids, kinetic and ther

Crafting a Usable Microkernel, Processor, and I/O System with Strict and Provable Information Flow Security

Science.gov (United States)

2011-01-01

OS level, Flume [22] has even been shown to be information flow secure through abstractions such as processes, pipes, file systems etc, while seL4 ...Andronick, D. Cock, P. Derrin, D. Elkaduwe, K. Engelhardt, R. Kolanski, M. Norrish, T. Sewell, H. Tuch, and S. Winwood. sel4 : formal verification of an

Progress in Teachers' Readiness to Promote Positive Youth Development among Students during the Lions Quest Teaching Workshop

Science.gov (United States)

Talvio, Markus; Berg, Minna; Ketonen, Elina; Komulainen, Erkki; Lonka, Kirsti

2015-01-01

Modern learning psychology places an emphasis on the ability of teachers to promote their students' social and emotional learning (SEL) and living a good life. Research on precisely how teachers promote SEL and well-being among their students, however, remains scarce. This study focused on evaluating the Lions Quest teaching workshop (LQ), which…

Plutonium finishing plant safety systems and equipment list

International Nuclear Information System (INIS)

Bergquist, G.G.

1995-01-01

The Safety Equipment List (SEL) supports Analysis Report (FSAR), WHC-SD-CP-SAR-021 and the Plutonium Finishing Plant Operational Safety Requirements (OSRs), WHC-SD-CP-OSR-010. The SEL is a breakdown and classification of all Safety Class 1, 2, and 3 equipment, components, or system at the Plutonium Finishing Plant complex

78 FR 24775 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and...

Science.gov (United States)

2013-04-26

... Devices, Portable Music and Data Processing Devices, Computers and Components Thereof; Commission Decision... importation of certain wireless communication devices, portable music and data processing devices, computers... '826 patent''). The complaint further alleges the existence of a domestic industry. The Commission's...

77 FR 38826 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and...

Science.gov (United States)

2012-06-29

... Devices, Portable Music and Data Processing Devices, Computers and Components Thereof, Commission Decision... importation of certain wireless communication devices, portable music and data processing devices, computers... further alleges the existence of a domestic industry. The Commission's notice of investigation named Apple...

78 FR 12785 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and...

Science.gov (United States)

2013-02-25

... Devices, Portable Music and Data Processing Devices, Computers and Components Thereof; Commission Decision... importation of certain wireless communication devices, portable music and data processing devices, computers... further alleges the existence of a domestic industry. The Commission's notice of investigation named Apple...

Humanitarian Use Device and Humanitarian Device Exemption regulatory programs: pros and cons.

Science.gov (United States)

Bernad, Daniel Maxwell

2009-03-01

The US FDA established the Humanitarian Use Device (HUD) and Humanitarian Device Exemption (HDE) program to encourage medical device firms to address rare diseases. Despite being in existence for over a decade, there has only been one peer-reviewed publication examining this field. The objective of this report is to investigate how the HUD/HDE program differs from the standard regulatory system, discuss its potential advantages and disadvantages, and to speculate which humanitarian devices will be brought to market within the next 5 years. A total of 40 semistructured interviews with stakeholders, representing approximately half (n = 20, 49%) of the firms that have successfully obtained HDE-approved products, were performed in order to acquire the primary data for this paper. There appear to be short-term gains and long-term drains associated with launching humanitarian devices to market. This report aims to provide sponsors with information that may allow them to make better decisions during their product development of humanitarian devices and may, hopefully, also play a role in encouraging other sponsors to take the necessary steps forward in helping to find treatments for patients with rare diseases.

77 FR 14272 - Medical Devices; Immunology and Microbiology Devices; Classification of Norovirus Serological...

Science.gov (United States)

2012-03-09

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 866 [Docket No. FDA-2012-N-0165] Medical Devices; Immunology and Microbiology Devices; Classification of Norovirus... AND MICROBIOLOGY DEVICES 0 1. The authority citation for 21 CFR part 866 continues to read as follows...

21 CFR 882.5050 - Biofeedback device.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Biofeedback device. 882.5050 Section 882.5050 Food... DEVICES NEUROLOGICAL DEVICES Neurological Therapeutic Devices § 882.5050 Biofeedback device. (a) Identification. A biofeedback device is an instrument that provides a visual or auditory signal corresponding to...

77 FR 52759 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and...

Science.gov (United States)

2012-08-30

... Devices, Portable Music and Data Processing Devices, Computers and Components Thereof; Notice of... communication devices, portable music and data processing devices, computers and components thereof by reason of... complaint further alleges the existence of a domestic industry. The Commission's notice of investigation...

HUBUNGAN ANTARA KONSENTRASI KARBON MONOKSIDA (CO DAN SUHU UDARA TERHADAP INTERVENSI ANTHROPOGENIK (STUDI KASUS NYEPI TAHUN 2015 DI PROVINSI BALI

Directory of Open Access Journals (Sweden)

Kharisma Aprilina

2016-10-01

Full Text Available Penelitian ini dilakukan untuk mengetahui perbedaan hubungan antara konsentrasi karbon monoksida (CO dan suhu udara pada saat Perayaan Hari Raya Nyepi tahun 2015 di Provinsi Bali (tanpa intervensi anthropogenik dan pada hari-hari biasa di luar Hari Raya Nyepi (dengan intervensi anthropogenik. Penelitian dilakukan dengan melakukan pengukuran konsentrasi CO dan suhu udara di tiga titik pengukuran yaitu Denpasar, Singaraja, dan Bedugul antara tanggal 17-25 Maret 2015, dimana hari Raya Nyepi dirayakan pada tanggal 21 Maret 2015. Pengukuran gas CO dilakukan dengan menggunakan alat pengukur konsentrasi polutan yang dinamakan Multi Gas Sensync dan pengukuran suhu udara dilakukan dengan menggunakan alat Portable Weather Station (PWS. Hasil penelitian menunjukkan bahwa hubungan antara konsentrasi CO dan suhu diDenpasar, Bedugul dan Singaraja pada saat hari Raya Nyepi menunjukkan adanya hubungan linier yang positifyang berarti antara konsentrasi CO dan suhu udara terjadi pengaruh yang saling menguatkan yaitu apabila terjadi peningkatansuhu udaramaka konsentrasi CO juga akan meningkat dan sebaliknya, sedangkan pada hari-hari di luar hari raya Nyepi hubungan antara keduanya terlihat tidak konsisten yang diduga karena adanya pengaruh dari faktor lain terutama yang disebabkan oleh aktivitas manusia (faktor anthropogenik. This study was conducted to determine the differences of carbon monoxide (CO concentration and air temperature relation during the celebration of Nyepi Day 2015 (without anthropogenic intervention in Bali Province and the days outside Nyepi Day (with anthropogenic intervention. The study was conducted by measuring the CO concentration and air temperature at the three measuring points those were Denpasar, Singaraja, and Bedugul, from 17 to 25 March 2015 which Nyepi Day was celebrated on March 21, 2015.CO measurement was performed using pollutant concentration measuring tool called Multi Gas Sensync and air temperature measurement was performed

Plasma facing device of thermonuclear device

International Nuclear Information System (INIS)

Sumita, Hideo; Ioki, Kimihiro.

1993-01-01

The present invention improves integrity of thermal structures of a plasma facing device. That is, in the plasma facing device, an armour block portion from a metal cooling pipe to a carbon material comprises a mixed material of the metal as the constituent material of the cooling pipe and ceramics. Then, the mixing ratio of the composition is changed continuously or stepwise to suppress peakings of remaining stresses upon production and thermal stresses upon exertion of thermal loads. Accordingly, thermal integrity of the structural materials can further be improved. In this case, a satisfactory characteristic can be obtained also by using ceramics instead of carbon for the mixed material, and the characteristic such as heat expansion coefficient is similar to that of the armour tile. (I.S.)

Cybersecurity for Connected Diabetes Devices.

Science.gov (United States)

Klonoff, David C

2015-04-16

Diabetes devices are increasingly connected wirelessly to each other and to data-displaying reader devices. Threats to the accurate flow of information and commands may compromise the function of these devices and put their users at risk of health complications. Sound cybersecurity of connected diabetes devices is necessary to maintain confidentiality, integrity, and availability of the data and commands. Diabetes devices can be hacked by unauthorized agents and also by patients themselves to extract data that are not automatically provided by product software. Unauthorized access to connected diabetes devices has been simulated and could happen in reality. A cybersecurity standard designed specifically for connected diabetes devices will improve the safety of these products and increase confidence of users that the products will be secure. © 2015 Diabetes Technology Society.

Human Factors and Medical Devices

International Nuclear Information System (INIS)

Dick Sawyer

1998-01-01

Medical device hardware- and software-driven user interfaces should be designed to minimize the likelihood of use-related errors and their consequences. The role of design-induced errors in medical device incidents is attracting widespread attention. The U.S. Food and Drug Administration (FDA) is fully cognizant that human factors engineering is critical to the design of safe medical devices, and user interface design is receiving substantial attention by the agency. Companies are paying more attention to the impact of device design, including user instructions, upon the performance of those health professionals and lay users who operate medical devices. Concurrently, the FDA is monitoring human factors issues in its site inspections, premarket device approvals, and postmarket incident evaluations. Overall, the outlook for improved designs and safer device operation is bright

Radiation emitting devices act

International Nuclear Information System (INIS)

1970-01-01

This Act, entitled the Radiation Emitting Devices Act, is concerned with the sale and importation of radiation emitting devices. Laws relating to the sale, lease or import, labelling, advertising, packaging, safety standards and inspection of these devices are listed as well as penalties for any person who is convicted of breaking these laws

Containment and surveillance devices

International Nuclear Information System (INIS)

Campbell, J.W.; Johnson, C.S.; Stieff, L.R.

The growing acceptance of containment and surveillance as a means to increase safeguards effectiveness has provided impetus to the development of improved surveillance and containment devices. Five recently developed devices are described. The devices include one photographic and two television surveillance systems and two high security seals that can be verified while installed

76 FR 69034 - Microbiology Devices; Classification of In Vitro Diagnostic Device for Yersinia Species Detection

Science.gov (United States)

2011-11-07

... Drug Administration 21 CFR Part 866 Microbiology Devices; Classification of In Vitro Diagnostic Device... CFR Part 866 [Docket No. FDA-2011-N-0729] Microbiology Devices; Classification of In Vitro Diagnostic... of the Microbiology Devices Advisory Panel (the panel). FDA is publishing in this document the...

76 FR 28689 - Microbiology Devices; Classification of In Vitro Diagnostic Device for Bacillus Species Detection

Science.gov (United States)

2011-05-18

.... FDA-2011-N-0103] Microbiology Devices; Classification of In Vitro Diagnostic Device for Bacillus... of the Microbiology Devices Advisory Panel (the Panel). In addition, the proposed rule would... in the Federal Register. 1. Transcript of the FDA Microbiology Devices Panel meeting, March 7, 2002...

Organic bistable light-emitting devices

Science.gov (United States)

Ma, Liping; Liu, Jie; Pyo, Seungmoon; Yang, Yang

2002-01-01

An organic bistable device, with a unique trilayer structure consisting of organic/metal/organic sandwiched between two outmost metal electrodes, has been invented. [Y. Yang, L. P. Ma, and J. Liu, U.S. Patent Pending, U.S. 01/17206 (2001)]. When the device is biased with voltages beyond a critical value (for example 3 V), the device suddenly switches from a high-impedance state to a low-impedance state, with a difference in injection current of more than 6 orders of magnitude. When the device is switched to the low-impedance state, it remains in that state even when the power is off. (This is called "nonvolatile" phenomenon in memory devices.) The high-impedance state can be recovered by applying a reverse bias; therefore, this bistable device is ideal for memory applications. In order to increase the data read-out rate of this type of memory device, a regular polymer light-emitting diode has been integrated with the organic bistable device, such that it can be read out optically. These features make the organic bistable light-emitting device a promising candidate for several applications, such as digital memories, opto-electronic books, and recordable papers.

Semiconductor-based, large-area, flexible, electronic devices

Science.gov (United States)

Goyal, Amit [Knoxville, TN

2011-03-15

Novel articles and methods to fabricate the same resulting in flexible, large-area, triaxially textured, single-crystal or single-crystal-like, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

Odontoblast layer structure alteration as a response to carious lesions

Directory of Open Access Journals (Sweden)

Tetiana Haniastuti

2011-09-01

Full Text Available Background: Dental caries is a bacterial disease affecting the hard tissue of the teeth as well as the pulp. The human dental pulp consists of odontoblast which are organized as a densely packed cell layer. Odontoblasts is located at the periphery of the pulp; therefore, they are the first cells encountered by cariogenic bacteria and their products that are represented in the carious lesion. Purpose: This study aimed to elucidate the effect of cariogenic bacteria to odontoblasts of human teeth. Methods: Five intact third molars and 15 third molars with occlusal caries at various stages of decay were extracted because of orthodontic or therapeutic reasons. The tooth specimens were fixed, decalcified with 10% EDTA solution (pH 7.4, and embedded in paraffin. Serial sections of 5 μm thickness were cut and stained with haematoxylin eosin and Gram’s, in addition to nestin immunohistochemistry. The specimens were then examined under light microscopy. Results: In normal teeth, odontoblast layer were aligned along the pulp chamber showing normal morphology of the cells. Slight disorganization of odontoblast layer was seen in the cases of carious lesions confined to enamel. In the cases of carious lesions confined to dentin, odontoblast layer was not observed in the areas subjacent to the lesions, only single cells showing flattened cell morphology were found. Odontoblasts beneath the lesion suffered severe damage and diminished nestin immunoreaction were observed in all cases of carious lesions with pulp exposure. Conclusion: Cariogenic bacteria invasion may damage the odontoblasts by affecting the morphology and vitality of the cells. The severity of the damage of the odontoblasts may increase as the bacterial invasion progresses toward the pulp.Latar belakang: Karies merupakan penyakit yang disebabkan oleh bakteri, yang dapat memengaruhi jaringan keras gigi maupun pulpa. Pada pulpa gigi manusia terdapat sel odontoblas yang tersusun atas lapisan sel

Secure-Network-Coding-Based File Sharing via Device-to-Device Communication

OpenAIRE

Wang, Lei; Wang, Qing

2017-01-01

In order to increase the efficiency and security of file sharing in the next-generation networks, this paper proposes a large scale file sharing scheme based on secure network coding via device-to-device (D2D) communication. In our scheme, when a user needs to share data with others in the same area, the source node and all the intermediate nodes need to perform secure network coding operation before forwarding the received data. This process continues until all the mobile devices in the netw...

Positioning devices for patients

International Nuclear Information System (INIS)

Heavens, M.

1981-01-01

It has been suggested that it is very important to position patients reproducibly at different stages of radiotherapy treatment planning and treatment, or similar procedures. Devices have been described for positioning a patient's upper and lower thorax. This invention provides reproducible positioning for a female patient's breasts, for example in planning treatment of and treating breast tumours. The patient is placed prone, using for example an upper thorax device. A support device is placed central to and beneath her breasts to partially displace them outwards. The device may be triangular in section with one apex contacting the chest wall at the sternum. Restraining straps may be provided to hold the breasts against the support device. Means may be provided to take a healthy breast from the path of radiation through the tumour. (author)

Relationship between deep venous thrombosis and inflammatory cytokines in postoperative patients with malignant abdominal tumors

Energy Technology Data Exchange (ETDEWEB)

Du, T.; Tan, Z. [National Wuhan University, Zhongnan Hospital, School of Medicine, Department of General Surgery, Wuhan, Hubei Province (China)

2014-08-22

Deep venous thrombosis (DVT) is a common surgical complication in cancer patients and evidence that inflammation plays a role in the occurrence of DVT is increasing. We studied a population of cancer patients with abdominal malignancies with the aim of investigating whether the levels of circulating inflammatory cytokines were associated with postoperative DVT, and to determine the levels in DVT diagnoses. The serum levels of C-reactive protein (CRP), interleukins (IL)-6 and IL-10, nuclear transcription factor-κB (NF-κB) and E-selectin (E-Sel) were determined in 120 individuals, who were divided into 3 groups: healthy controls, patients with and patients without DVT after surgery for an abdominal malignancy. Data were analyzed by ANOVA, Dunnet's T3 test, chi-square test, and univariate and multivariate logistic regression as needed. The CRP, IL-6, NF-κB, and E-Sel levels in patients with DVT were significantly higher than those in the other groups (P<0.05). The IL-10 level was higher in patients with DVT than in controls but lower than in patients without DVT. Univariate analysis revealed that CRP, IL-6, NF-κB, and E-Sel were statistically associated with the risk of DVT (OR=1.98, P=0.002; OR=1.17, P=0.000; OR=1.03, P=0.042; and OR=1.38, P=0.003; respectively), whereas IL-10 had a protective effect (OR=0.94, P=0.011). Multivariate analysis showed that E-Sel was an independent risk factor (OR=1.41, P=0.000). Thus, this study indicated that an increased serum level of E-Sel was associated with increased DVT risk in postoperative patients with abdominal malignancy, indicating that E-Sel may be a useful predictor of diagnosis of DVT.

78 FR 26786 - Microbiology Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

Science.gov (United States)

2013-05-08

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0001] Microbiology Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY: Food and Drug...: Microbiology Devices Panel of the Medical Devices Advisory Committee. General Function of the Committee: To...

76 FR 48871 - Immunology Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting

Science.gov (United States)

2011-08-09

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2011-N-0002] Immunology Devices Panel of the Medical Devices Advisory Committee; Notice of Meeting AGENCY: Food and Drug...: Immunology Devices Panel of the Medical Devices Advisory Committee. General Function of the Committee: To...

Solar panel foundation device

Energy Technology Data Exchange (ETDEWEB)

Hawley, W.W.

1983-03-29

A transportable solar panel foundation device which has a bottom member, at least one upstanding side member, and an essentially open top. The side members are angled to permit nesting of a plurality of the foundation devices, and reinforcement pads are carried by the foundation device to support legs for one or more solar panels.

Software Engineering Laboratory Series: Proceedings of the Twenty-First Annual Software Engineering Workshop

Science.gov (United States)

1996-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Proceedings of the Twenty-Second Annual Software Engineering Workshop

Science.gov (United States)

1997-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 14

Science.gov (United States)

1996-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Proceedings of the Twentieth Annual Software Engineering Workshop

Science.gov (United States)

1995-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 15

Science.gov (United States)

1997-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Promoting Social and Emotional Competencies in Elementary School

Science.gov (United States)

Jones, Stephanie M.; Barnes, Sophie P.; Bailey, Rebecca; Doolittle, Emily J.

2017-01-01

There's a strong case for making social and emotional learning (SEL) skills and competencies a central feature of elementary school. Children who master SEL skills get along better with others, do better in school, and have more successful careers and better mental and physical health as adults. Evidence from the most rigorous studies of…

Software Engineering Laboratory Series: Collected Software Engineering Papers. Volume 13

Science.gov (United States)

1995-01-01

The Software Engineering Laboratory (SEL) is an organization sponsored by NASA/GSFC and created to investigate the effectiveness of software engineering technologies when applied to the development of application software. The activities, findings, and recommendations of the SEL are recorded in the Software Engineering Laboratory Series, a continuing series of reports that includes this document.

Equipment abnormality monitoring device

International Nuclear Information System (INIS)

Ando, Yasumasa

1991-01-01

When an operator hears sounds in a plantsite, the operator compares normal sounds of equipment which he previously heard and remembered with sounds he actually hears, to judge if they are normal or abnormal. According to the method, there is a worry that abnormal conditions can not be appropriately judged in a case where the number of objective equipments is increased and in a case that the sounds are changed gradually slightly. Then, the device of the present invention comprises a plurality of monitors for monitoring the operation sound of equipments, a recording/reproducing device for recording and reproducing the signals, a selection device for selecting the reproducing signals among the recorded signals, an acoustic device for converting the signals to sounds, a switching device for switching the signals to be transmitted to the acoustic device between to signals of the monitor and the recording/reproducing signals. The abnormality of the equipments can be determined easily by comparing the sounds representing the operation conditions of equipments for controlling the plant operation and the sounds recorded in their normal conditions. (N.H.)

After-heat removing device

International Nuclear Information System (INIS)

Iwashige, Kengo; Otsuka, Masaya; Yokoyama, Iwao; Yamakawa, Masanori.

1990-01-01

The present invention concerns an after-heat removing device for first reactors. A heat accumulation portion provided in a cooling channel of an after-heat removing device is disposed before a coil-like heat conduction pipe for cooling of the after-heat removing device. During normal reactor operation, the temperature in the heat accumulation portion is near the temperature of the high temperature plenum due to heat conduction and heat transfer from the high temperature plenum. When the reactor is shutdown and the after-heat removing device is started, coolants cooled in the air cooler start circulation. The coolants arriving at the heat accumulation portion deprive heat from the heat accumulation portion and, ion turn, increase their temperature and then reach the cooling coil. Subsequently, the heat calorie possessed in the heat accumulation portion is reduced and the after-heat removing device is started for the operation at a full power. This can reduce the thermal shocks applied to the cooling coil or structures in a reactor vessel upon starting the after-heat removing device. (I.N.)

Utilization technique on variable speed device

International Nuclear Information System (INIS)

1989-12-01

This reports of workshop on power technology describes using technique on variable speed device, which deals with alternating current situation and prospect of current variable speed device, technical trend and prospect of electronics, reduce expenses by variable speed device, control technique, measurement technology, high voltage variable speed device, recent trend of inverter technology, low voltage and high voltage variable speed device control device, operating variable speed device in cooling fan, FDF application and defect case of variable speed device, cooling pump application of water variable transformer, inverter application and energy effect of ventilation equipment, application of variable speed device and analysis of the result of operation and study for application of variable speed technology.

Hardware device binding and mutual authentication

Science.gov (United States)

Hamlet, Jason R; Pierson, Lyndon G

2014-03-04

Detection and deterrence of device tampering and subversion by substitution may be achieved by including a cryptographic unit within a computing device for binding multiple hardware devices and mutually authenticating the devices. The cryptographic unit includes a physically unclonable function ("PUF") circuit disposed in or on the hardware device, which generates a binding PUF value. The cryptographic unit uses the binding PUF value during an enrollment phase and subsequent authentication phases. During a subsequent authentication phase, the cryptographic unit uses the binding PUF values of the multiple hardware devices to generate a challenge to send to the other device, and to verify a challenge received from the other device to mutually authenticate the hardware devices.

KARAKTERISTIK REAKTIVITAS TERAS KERJA RSG-GAS SELAMA 30 TAHUN BEROPERASI

Directory of Open Access Journals (Sweden)

Tukiran Surbakti

2017-06-01

Full Text Available RSG-GAS, mulai dari komisioning, operasi teras kerja hingga kini telah 30 tahun beroperasi sehingga perlu dilakukan evaluasi keselamatan parameter neutroniknya. Untuk tujuan keselamatan telah dilakukan berbagai aktivitas penelitian, baik yang berhubungan dengan operasi, keselamatan, maupun dalam rangka penggunaan reaktor. Analisis dan pengelolaan besaran reaktivitas yang menunjang keselamatan operasi reaktor sangat penting dilakukan karena besaran ini mempengaruhi desain, kendali dan jadual operasi reaktor. Besaran tersebut dapat ditentukan melalui pengukuran reaktivitas batang kendali dan eksperimen pemuatan bahan bakar di dalam teras. Pengukuran reaktivitas batang kendali yang dilakukan pada setiap awal siklus teras (dengan kondisi teras dingin dan bersih, bebas pengaruh xenon, menghasilkan nilai reaktivitas batang kendali yang dapat digunakan untuk menentukan nilai reaktivitas lainnya seperti reaktivitas lebih, reaktivitas padam dan reaktivitas total. Pengelolaan reaktivitas teras telah dilakukan dengan baik selama 30 tahun dalam rangka mendukung operasi reaktor untuk keperluan penelitian dan iradiasi target.

Pollen Ultrastructure of Genus Dendrobium Orchids as a Learning Resource

Directory of Open Access Journals (Sweden)

Lika Dwi Apriani

2016-11-01

Full Text Available Anggrek genus Dendrobium merupakan salah satu genus dari divisi spermatophyta yang merupakan kelompok tumbuhan yang berkembang dengan menggunakan biji. Tumbuhan berbiji tentu memiliki bunga sebagai alat perkembangan generatifnya. Perkembangan generatif pada bunga artinya pertemuan antara sel gamet jantan dan sel gamet betina. Sel gamet betina pada tumbuhan dihasilkan oleh putik, sedangkan sel gamet jantan disebut serbuk sari atau pollen. Genus Dendrobium merupakan salah satu kekayaan alam Indonesia, jumlahnya diperkirakan mencapai 275 spesies. Penelitian ini bertujuan untuk mengetahui bagaimana ultrastruktur pollen anggrek genus Dendrobium dari sepuluh spesies yang diamati menggunakan SEM. Jenis penelitian ini adalah deskriptif kualitatif. Hasil penelitian menunjukkan unit pollen untuk semua spesies yaitu kategori pollinia, sedangkan untuk polaritas pollen adalah apolar. Jenis aperture kesepuluh spesies yang diamati mempunyai aperture dengan pola yang tidak beraturan dan lebih dari enam yang disebut colpate. Bentuk pollen dari semua spesies yang diteliti bentuknya adalah subprolate hingga prolate dan ukuran pollen termasuk dalam kategori minuta hingga media. Ornamentasi pollen atau skluptur pollen tidak teridentifikasi dikarenakan ukuran pollen yang terlalu kecil, permukaan pollen terlihat kurang jelas. Sumber belajar yang digunakan adalah atlas.

Attitudes of Chilean students from different socioeconomic levels at the beginning of the implementation of the law governing the sale and advertising of foods high in critical nutrients

Science.gov (United States)

Olivares Cortes, Sonia; Araneda Flores, Jacqueline; Morales Illanes, Gladys; Leyton Dinamarca, Bárbara; Bustos Zapata, Nelly; Hernández Moreno, María Angélica; Oyarzún Macchiavello, María Teresa

2017-03-30

Background: On June 27th 2016 the law that regulates sale and advertising of foods high in critical nutrients was implemented in Chile. This law regulates the processed food packaging labelling of foods high in calories, saturated fats, sugars and sodium. Objective: To determine 8-12 year old school children attitudes, from different socioeconomic levels (SEL) and nutritional status, toward the new food labelling law. Methods: A previously validated survey was applied, adding questions regarding the new logos to be added on the packaging of foods and beverages. A descriptive analysis of the variables being studied was conducted and differences in relation to the SEL and nutritional status were determined using the Chi2 test. Results: Statistically significant differences were not observed for gender or city. Regarding the new logos, 87.3% of the children from a medium to high SEL and 78.5% from low SEL indicated that they liked to be informed about the contents of food (p educational and social marketing support to improve the understanding, compliance and fulfillment of the law.

TNF induction of EL4 hyposensitivity to lysis by recombinant (soluble) and membrane-associated TNFs: TNF binding, internalization, and degradation.

Science.gov (United States)

Fishman, M; Costlow, M

1994-04-01

EL4 mouse thymoma cells sensitive to TNF-mediated lysis only in the presence of cycloheximide (S-EL4) or in the presence or absence of cycloheximide (N-EL4) were used in these experiments. Murine tumor cell line (S-EL4) sensitivity to TNF cytotoxicity is augmented when cycloheximide is added together with TNF or when cycloheximide is added 1 hr before or after TNF. No enhanced sensitivity is observed when target cells are incubated with cycloheximide 2-4 hr before or after the addition of TNF. In the absence of cycloheximide, S-EL4 cells preexposed to murine TNF are less susceptible to lysis by TNF and TNF receptor-conjugated TNF but are lysed by integral membrane TNF. TNF-induced hyposensitivity is partially reversed by actinomycin D or by culturing the preexposed cells for 4 hr prior to TNF lytic assay. TNF preincubation of N- and S-EL4 cells results in an immediate decrease in 125I-TNF binding due to TNF receptor occupancy. Recovery of TNF-R occupancy and TNF internalization were subsequently noted.

Partial Device Fingerprints

NARCIS (Netherlands)

Ciere, M.; Hernandez Ganan, C.; van Eeten, M.J.G.

2017-01-01

In computing, remote devices may be identified by means of device fingerprinting, which works by collecting a myriad of clientside attributes such as the device’s browser and operating system version, installed plugins, screen resolution, hardware artifacts, Wi-Fi settings, and anything else

Incore monitoring device

International Nuclear Information System (INIS)

Tai, Ichiro; Shirayama, Shin-pei; Nozaki, Shin-ichi.

1978-01-01

Purpose: To provide an incore monitoring device wherein both radiation monitoring and acoustic monitoring are carried out simultaneously by one detector, whereby installation of the device and signal pick-up are facilitated. Incore conditions are accurately grasped. Constitution: When a neutron is irradiated in a state where a DC voltage is applied between the electrode and the vessel in the device, an ionization current is occured by (n.γ) reaction of the transformed substance as in an ionization chamber, Accordingly, a voltage drop occurs at both ends of the resistor of the radiation signal processing system, as a result of which a neutron flux can be detected. Further, when a sound is generated in the reactor, the monitoring device bottom wall which formed by a piezoelectric element detects the sound-waves. This output signal is picked up by the acoustic signal processing system to judge the generation of sound. (Aizawa, K.)

High-Fidelity Piezoelectric Audio Device

Science.gov (United States)

Woodward, Stanley E.; Fox, Robert L.; Bryant, Robert G.

2003-01-01

ModalMax is a very innovative means of harnessing the vibration of a piezoelectric actuator to produce an energy efficient low-profile device with high-bandwidth high-fidelity audio response. The piezoelectric audio device outperforms many commercially available speakers made using speaker cones. The piezoelectric device weighs substantially less (4 g) than the speaker cones which use magnets (10 g). ModalMax devices have extreme fabrication simplicity. The entire audio device is fabricated by lamination. The simplicity of the design lends itself to lower cost. The piezoelectric audio device can be used without its acoustic chambers and thereby resulting in a very low thickness of 0.023 in. (0.58 mm). The piezoelectric audio device can be completely encapsulated, which makes it very attractive for use in wet environments. Encapsulation does not significantly alter the audio response. Its small size (see Figure 1) is applicable to many consumer electronic products, such as pagers, portable radios, headphones, laptop computers, computer monitors, toys, and electronic games. The audio device can also be used in automobile or aircraft sound systems.

Nuclear fuel shipping inspection device

International Nuclear Information System (INIS)

Takahashi, Toshio; Hada, Koji.

1988-01-01

Purpose: To provide an nuclear fuel shipping inspection device having a high detection sensitivity and capable of obtaining highly reliable inspection results. Constitution: The present invention concerns a device for distinguishing a fuel assembly having failed fuel rods in LMFBR type reactors. Coolants in a fuel assembly to be inspected are collected by a sampling pipeway and transferred to a filter device. In the filter device, granular radioactive corrosion products (CP) in the coolants are captured, to reduce the background. The coolants, after being passed through the filter device, are transferred to an FP catching device and gamma-rays of iodine and cesium nuclides are measured in FP radiation measuring device. Subsequently, the coolants transferred to a degasing device to separate rare gas FP in the coolants from the liquid phase. In a case if rare gas fission products are detected by the radiation detector, it means that there is a failed fuel rod in the fuel assembly to be inspected. Since the CP and the soluble FP are separated and extracted for the radioactivity measurement, the reliability can be improved. (Kamimura, M.)

Delay reduction in multi-hop device-to-device communication using network coding

KAUST Repository

Douik, Ahmed S.

2015-08-12

This paper considers the problem of reducing the broadcast delay of wireless networks using instantly decodable network coding (IDNC) based device-to-device (D2D) communications. In D2D-enabled networks, devices help hasten the recovery of the lost packets of devices in their transmission range by sending network coded packets. To solve the problem, the different events occurring at each device are identified so as to derive an expression for the probability distribution of the decoding delay. The joint optimization problem over the set of transmitting devices and the packet combinations of each is formulated. Due to the high complexity of finding the optimal solution, this paper focuses on cooperation without interference between the transmitting users. The optimal solution, in such interference-less scenario, is expressed using a graph theory approach by introducing the cooperation graph. Extensive simulations compare the decoding delay experienced in the Point to Multi-Point (PMP), the fully connected D2D (FC-D2D) and the more practical partially connected D2D (PC-D2D) configurations and suggest that the PC-D2D outperforms the FC-D2D in all situations and provides an enormous gain for poorly connected networks.

Triboluminescent tamper-indicating device

Science.gov (United States)

Johnston, Roger G.; Garcia, Anthony R. E.

2002-01-01

A tamper-indicating device is described. The device has a transparent or translucent cylindrical body that includes triboluminescent material, and an outer opaque layer that prevents ambient light from entering. A chamber in the body holds an undeveloped piece of photographic film bearing an image. The device is assembled from two body members. One of the body members includes a recess for storing film and an optical assembly that can be adjusted to prevent light from passing through the assembly and exposing the film. To use the device with a hasp, the body members are positioned on opposite sides of a hasp, inserted through the hasp, and attached. The optical assembly is then manipulated to allow any light generated from the triboluminescent materials during a tampering activity that damages the device to reach the film and destroy the image on the film.

PEMODELAN TERAS UNTUK ANALISIS PERHITUNGAN KONSTANTA MULTIPLIKASI REAKTOR HTR-PROTEUS

Directory of Open Access Journals (Sweden)

Zuhair Zuhair

2015-04-01

Full Text Available PTRKN sebagai salah satu unit kerja di BATAN dengan tugas pokok dan fungsi yang berkaitan erat dengan teknologi reaktor dan keselamatan nuklir, menaruh perhatian khusus pada konsep reaktor pebble bed. Dalam makalah ini pemodelan reaktor pebble bed HTR-PROTEUS dilakukan dengan program transport Monte Carlo MCNP5. Partikel bahan bakar berlapis TRISO dimodelkan secara detail dan eksak dimana distribusi acak partikel ini dalam bola bahan bakar didekati menggunakan array teratur kisi SC dengan fraksi packing 5,76% tanpa zona eksklusif. Model teras pebble bed didekati dengan memanfaatkan kisi teratur dari bola yang disusun sebagai kisi BCC berdasarkan sel berulang yang digenerasi dari sejumlah sel satuan. Hasil perhitungan MCNP5 memperlihatkan kesesuaian yang sangat baik dengan eksperimen, walaupun teras HTR-PROTEUS diprediksi lebih reaktif daripada pengukuran, khususnya di teras 4.2 dan 4.3. Pustaka ENDF/B-VI menunjukkan konsistensi dengan estimasi keff paling akurat dibandingkan pustaka ENDF/B-V, terutama ENDF/B-VI (66c. Deviasi estimasi keff yang dihitung dengan eksperimen dikaitkan sebagai konsekuensi dari komposisi reflektor grafit yang dispesifikasikan. Komparasi yang dibuat memperlihatkan bahwa MCNP5 menghasilkan keff teras HTR-PROTEUS lebih presisi daripada hasil dari MCNP4B dan MCNPBALL. Hasil ini menyimpulkan bahwa, sukses metodologi pemodelan ini menjustifikasi aplikasi MCNP5 untuk analisis reaktor pebble bed lainnya. Kata kunci: pemodelan teras HTR-PROTEUS, konstanta multiplikasi, MCNP5   PTRKN as a working unit in BATAN whose main duties and functions are related to reactor technology and nuclear safety, consern attention to pebble bed reactor concept. In this paper modeling of HTR-PROTEUS pebble bed reactor was done using Monte Carlo transport code MCNP5. The TRISO coated fuel particle is modeled in detailed and exact manner where random distributions of these particles in fuel pebble is approximated by using regular array of SC lattice

Safety device of thermonuclear device

International Nuclear Information System (INIS)

Aoki, Isao; Ueda, Shuzo; Seki, Yasushi; Sakurai, Akiko; Kasahara, Fumio; Obara, Atsushi; Yamauchi, Michinori.

1997-01-01

The present invention provides a safety device against an event of intrusion of coolants in a vacuum vessel. Namely, a coolant supply system comprises cooling tubes for supplying coolants to main reactor structure components including a vacuum vessel. A detection means detects leakage of coolants in the vacuum vessel. A coolant supply control means controls the supply of coolants to the main reactor structural components based on the leakage detection signals of the detection means. A stagnated material discharging means discharges stagnated materials in the main reactor structural components caused by the leakage of coolants. The leakage of coolants (for example, water) in the vacuum vessel can thus be detected by the water detection device in the vacuum vessel. A control value of a coolant supply means is closed by the leakage detection signals. The supply of coolants to the main reactor structural components is restricted to suppress the leakage. The stagnated materials are discharged to a tank by way of a water draining valve. (I.S.)

Diamond semiconducting devices

International Nuclear Information System (INIS)

Polowczyk, M.; Klugmann, E.

1999-01-01

Many efforts to apply the semiconducting diamond for construction of electronic elements: resistors, thermistors, photoresistors, piezoresistors, hallotrons, pn diodes, Schottky diodes, IMPATT diodes, npn transistor, MESFETs and MISFETs are reviewed. Considering the possibilities of acceptor and donor doping, electrical resistivity and thermal conductivity of diamond as well as high electric-field breakdown points, that diamond devices could be used at about 30-times higher frequency and more then 8200 times power than silicon devices. Except that, due to high heat resistant of diamond, it is concluded that diamond devices can be used in environment at high temperature, range of 600 o C. (author)

A gauge device

International Nuclear Information System (INIS)

Qurnell, F.D.; Patterson, C.B.

1982-01-01

A readily transportable device of relative light weight comprising a pair of tensioned guides for providing accurate and stable reference planes. An embodiment comprises a pair of rods or guides in tension between a pair of end members, the end members being spaced apart by a pair of arcuate compression members. The tensioned guides provide planes of reference for measuring devices moved therealong adjacent to a component to be measured. The device is especially useful for making on-site dimensional measurements of components, such as irradiated and therefore radioactive components, that cannot readily be transported to an inspection laboratory. (author)

Digital communication device

DEFF Research Database (Denmark)

2005-01-01

The invention concerns a digital communication device like a hearing aid or a headset. The hearing aid or headset has a power supply, a signal processing device, means for receiving a wireless signal and a receiver or loudspeaker, which produces an audio signal based on a modulated pulsed signal...... point is provided which is in electrical contact with the metal of the metal box and whereby this third connection point is connected to the electric circuitry of the communication device at a point having a stable and well defined electrical potential. In this way the electro-and magnetic radiation...

PERFORMA FOTOSINTESIS Kappaphycus sp. (strain Sumba YANG DIUKUR BERDASARKAN EVOLUSI OKSIGEN TERLARUT PADA BEBERAPA TINGKAT SUHU DAN CAHAYA

Directory of Open Access Journals (Sweden)

Lideman Lideman

2015-03-01

Full Text Available Penelitian ini bertujuan untuk mengetahui pengaruh suhu dan cahaya terhadap laju fotosintesis Kappaphycus sp. (strain Sumba yang diukur berdasarkan perubahan oksigen terlarut. Pengukuran laju fotosintesis Kappaphycus sp. pertama-tama dilakukan pada suhu 20oC, 24oC, 28oC, dan 32oC pada tingkat cahaya 353 μmol photons m-2 s-1 untuk mendapatkan kurva fotosintesis versus suhu (kurva P-T. Selanjutnya, pengukuran laju fotosintesis dilakukan pada suhu 20oC, 24oC, dan 28oC dengan intensitas cahaya 9, 22, 46, 58, 87, 137, 245, 353, 487, 608, dan 789 μmol photons m-2 s-1 dan juga pengukuran laju respirasi pada tingkat cahaya 0 μmol photons m-2 s-1 untuk menghasilkan kurva fotosintesis versus cahaya (kurva P-I. Beberapa parameter fotosintesis yaitu: laju fotosintesis maksimum (Pmax, koefisien fotosintesis (α, intensitas cahaya jenuh (Ek, dan intensitas cahaya kompensasi (Ec dihitung dengan cara memplotkan kurva P-I terhadap model persamaan regresi non linear P = {Pmax x tanh (α / Pmax x I} + Rd. Hasil yang diperoleh menunjukkan bahwa laju fotosintesis tertinggi sebesar 6,92 μg O2 gww-1 min-1 dicapai pada suhu 28oC dengan tingkat cahaya 353 μmol photons m-2 s-1. Pada suhu 20oC, 24oC, dan 28oC, laju fotosintesis mencapai tingkat maksimum (Pmax pada intensitas cahaya (Ek 86,1; 154,2; dan 162,4 μmol photons m-2 s-1. Suhu yang optimum untuk aktivitas fotosintesis berkorelasi erat dengan suhu pada lingkungan budidaya di alam.

PROTOTIPE SISTEM JARINGAN SENSOR UNTUK MONITORING TEMPERATUR-KELEMBABAN PERMUKAAN DAN BAWAH LAHAN GAMBUT BERBASIS DATABASE

Directory of Open Access Journals (Sweden)

Hendra Rosada Nasution

2016-02-01

Full Text Available ABSTRAK. Lahan gambut adalah jenis tanah yang terbentuk dari sisa-sisa tumbuhan yang terpendam dalam jangka  waktu yang sangat lama. Lahan gambut memiliki  karakteristik mudah terbakar  pada kondisi panas tertentu yang membentuk bara api di bawah permukaan dan menjalar ke atas permukaan hingga menyebabkan terbakarnya semak belukar atau hutan yang berada di atasnya, sehingga perlu dilakukan monitoring temperatur dan kelembaban permukaan dan bawah lahan gambut. Prototipe yang dibuat terdiri dari dua perangkat transmitter yang dilengkapi dengan sensor sebagai pengukur parameter dan satu perangkat receiver sebagai penerima data kedua transmitter. Pengukuran temperatur tanah di bawah permukaan digunakan sensor LM35 berbentuk probe, kemudian pengukuran temperatur dan kelembaban udara di permukaan digunakan sensor SHT11. pengiriman data dilakukan secara nirkabel menggunakan nRF24L01 dengan jarak maksimal 450 meter dengan jarak yang baik 200 meter. Perangkat receiver dilengkapi sistem interface PC berbasis database pada server  localhost/phpmyadmin. Hasil karakterisasi sensor LM35 dalam bentuk probe menunjukan linieritasnya adalah 0,9994 dan 0,9996; deviasi error 0,380C dan 0,400C; sensitivitas 0,960C dan 0,810C. Hasil lima kali pengukuran pada dua titik pengujian setiap transmitter menunjukkan temperatur tanah memiliki nilai 30,200C - 38,100C dan 24,800C - 38,600C, temperatur udara 25,000C - 38,860C dan 24,850C - 40,150C, kelembaban udara 51,65% - 96,51% dan 43,03% - 96,17%.   Kata kunci : Prototipe, Database, Lahan Gambut, LM35, nRF24L01, SHT11

Resource management for device-to-device underlay communication

CERN Document Server

Song, Lingyang; Xu, Chen

2013-01-01

Device-to-Device (D2D) communication will become a key feature supported by next generation cellular networks, a topic of enormous importance to modern communication. Currently, D2D serves as an underlay to the cellular network as a means to increase spectral efficiency. Although D2D communication brings large benefits in terms of system capacity, it also causes interference as well as increased computation complexity to cellular networks as a result of spectrum sharing. Thus, efficient resource management must be performed to guarantee a target performance level of cellular communication.This

Articulating feedstock delivery device

Science.gov (United States)

Jordan, Kevin

2013-11-05

A fully articulable feedstock delivery device that is designed to operate at pressure and temperature extremes. The device incorporates an articulating ball assembly which allows for more accurate delivery of the feedstock to a target location. The device is suitable for a variety of applications including, but not limited to, delivery of feedstock to a high-pressure reaction chamber or process zone.