WorldWideScience

Sample records for device wavegen hydra

  1. Floating attenuator wave energy device: Wavegen HYDRA project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This report describes research funded by the Department of Trade and Industry (DTI) into the feasibility of developing and constructing a floating attenuator wave energy device known as HYDRA following initial studies by Wavegen. HYDRA is a floating externally tensioned articulated raft wave energy generator based on work by Professor FJM Farley and colleagues during the 1980s. The project's first four work tasks confirmed the theoretical potential of the device but also highlighted significant practical problems in translating that potential into a viable design. It was therefore decided not to proceed further, i.e. not to construct and test a prototype device. The report provides a general description of the device and describes the results of the initial analysis and the first series of model tests. It then discusses device design and component testing and explains the methodology for determining device performance at a particular site and mathematical modelling of a one-third scale device. To help future research and development programmes, the report emphasises the generic problems associated with the development of wave devices.

  2. Floating attenuator wave energy device. Wavegen HYDRA project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    The Wavegen Project which set out to develop a floating externally tensioned articulated wave-energy generator based on work carried out at RMCS Shrivenham in the 1980s has been abandoned until further notice. The computer modelling carried out in the early days indicated much promise, but the promise turned to disappointment when difficulties cropped-up in attempting to put the design into practice. A particular problem arose in matching the external tension to an equivalent beam stiffness to tune the natural bending frequency of the raft to that of the driving waves. A further eleven practical problems encountered are discussed.

  3. Hydra

    DEFF Research Database (Denmark)

    Peder Pedersen, Claus

    2009-01-01

    Præsentation af forskningsprojekt relateret til den græske ø Hydra med fokus på konception og arkitekturtegning.......Præsentation af forskningsprojekt relateret til den græske ø Hydra med fokus på konception og arkitekturtegning....

  4. Hydra

    DEFF Research Database (Denmark)

    Peder Pedersen, Claus; Dinesen, Cort Ross

    2009-01-01

    Beskrivelse af kontekst og baggrund for et forskningsprojekt gennemført på den græske ø Hydra i perioden 2004-2008......Beskrivelse af kontekst og baggrund for et forskningsprojekt gennemført på den græske ø Hydra i perioden 2004-2008...

  5. Sommerskole 2004 - Hydra

    DEFF Research Database (Denmark)

    2004-01-01

    Montagen af/som nye erfaringsrum: intensiteter gennem disjunktioner. Arbejdsprocessen var struktureret gennem en række fortløbende spørgsmål, der blev formuleret successivt i perioden. Hydra kan ses som en kompleks topologisk konfiguration: hvis man betragter dens morfologi som en plastisk membra...... - en latex hvorigennem de topologiske kræfter tegner konturer - vil særlige strukturer danne ar i væv. Hydra kan ses som 2 komplekse topologiske og morfologiske plastiske membraner, der overførte eller snarere relaterede sine "mulige ny ar, rifter, knuder og forvridninger" i en symbiose...

  6. The dynamic genome of Hydra

    Science.gov (United States)

    Chapman, Jarrod A.; Kirkness, Ewen F.; Simakov, Oleg; Hampson, Steven E.; Mitros, Therese; Weinmaier, Therese; Rattei, Thomas; Balasubramanian, Prakash G.; Borman, Jon; Busam, Dana; Disbennett, Kathryn; Pfannkoch, Cynthia; Sumin, Nadezhda; Sutton, Granger G.; Viswanathan, Lakshmi Devi; Walenz, Brian; Goodstein, David M.; Hellsten, Uffe; Kawashima, Takeshi; Prochnik, Simon E.; Putnam, Nicholas H.; Shu, Shengquiang; Blumberg, Bruce; Dana, Catherine E.; Gee, Lydia; Kibler, Dennis F.; Law, Lee; Lindgens, Dirk; Martinez, Daniel E.; Peng, Jisong; Wigge, Philip A.; Bertulat, Bianca; Guder, Corina; Nakamura, Yukio; Ozbek, Suat; Watanabe, Hiroshi; Khalturin, Konstantin; Hemmrich, Georg; Franke, André; Augustin, René; Fraune, Sebastian; Hayakawa, Eisuke; Hayakawa, Shiho; Hirose, Mamiko; Hwang, Jung Shan; Ikeo, Kazuho; Nishimiya-Fujisawa, Chiemi; Ogura, Atshushi; Takahashi, Toshio; Steinmetz, Patrick R. H.; Zhang, Xiaoming; Aufschnaiter, Roland; Eder, Marie-Kristin; Gorny, Anne-Kathrin; Salvenmoser, Willi; Heimberg, Alysha M.; Wheeler, Benjamin M.; Peterson, Kevin J.; Böttger, Angelika; Tischler, Patrick; Wolf, Alexander; Gojobori, Takashi; Remington, Karin A.; Strausberg, Robert L.; Venter, J. Craig; Technau, Ulrich; Hobmayer, Bert; Bosch, Thomas C. G.; Holstein, Thomas W.; Fujisawa, Toshitaka; Bode, Hans R.; David, Charles N.; Rokhsar, Daniel S.; Steele, Robert E.

    2015-01-01

    The freshwater cnidarian Hydra was first described in 17021 and has been the object of study for 300 years. Experimental studies of Hydra between 1736 and 1744 culminated in the discovery of asexual reproduction of an animal by budding, the first description of regeneration in an animal, and successful transplantation of tissue between animals2. Today, Hydra is an important model for studies of axial patterning3, stem cell biology4 and regeneration5. Here we report the genome of Hydra magnipapillata and compare it to the genomes of the anthozoan Nematostella vectensis6 and other animals. The Hydra genome has been shaped by bursts of transposable element expansion, horizontal gene transfer, trans-splicing, and simplification of gene structure and gene content that parallel simplification of the Hydra life cycle. We also report the sequence of the genome of a novel bacterium stably associated with H. magnipapillata. Comparisons of the Hydra genome to the genomes of other animals shed light on the evolution of epithelia, contractile tissues, developmentally regulated transcription factors, the Spemann–Mangold organizer, pluripotency genes and the neuromuscular junction. PMID:20228792

  7. The Hydra drawings: digital imperfection

    DEFF Research Database (Denmark)

    Peder Pedersen, Claus

    2008-01-01

    Teksten diskuterer den digitale tegnings potenitaler med udgangspunkt i et kunstnerisk udviklingsarbejde gennemført på den græske ø Hydra. Den fokuserer på tegningens historiske betydning som medie for arkitektonisk formgivning og diskuterer muligheden for at gentænke forholdet mellem det åbent...

  8. Masses of Nix and Hydra

    CERN Document Server

    Tholen, David J; Grundy, William M; Elliott, Garrett T

    2007-01-01

    A four-body orbit solution for the Pluto system yields GM values of 870.3 +/- 3.7, 101.4 +/- 2.8, 0.039 +/- 0.034, and 0.021 +/- 0.042 km3 sec-2 for Pluto, Charon, Nix, and Hydra, respectively. Assuming a Charon-like density of 1.63 gm cm-3, the implied diameters for Nix and Hydra are 88 and 72 km, leading to visual geometric albedos of 0.08 and 0.18, respectively, though with considerable uncertainty. The eccentricity of Charon's orbit has a significant nonzero value; however, the 0.030 +/- 0.009 deg yr-1 rate at which the line of apsides precesses is insufficient to explain the difference in the longitude of periapsis seen in the orbits fitted to the 1992-1993 and 2002-2003 data sets. The mean orbital periods for Hydra, Nix, and Charon are in the ratios of 6.064 +/- 0.006 : 3.991 +/- 0.007 : 1, but we have not identified any resonant arguments that would indicate the existence of a mean motion resonance between any pairs of satellites.

  9. Coexistence of neuropeptides in hydra

    DEFF Research Database (Denmark)

    Grimmelikhuijzen, C J

    1983-01-01

    Using a technique for simultaneous visualisation of two antigens in one section, oxytocin-like immunoreactivity has been found to coexist with bombesin-like immunoreactivity in neurons of the basal disk, gastric region and tentacles of hydra. Neurons with oxytocin-like immunoreactivity in peduncle...... and hypostome, on the other hand, have little or no bombesin-like material. Oxytocin-like immunoreactivity never coexists with FMRFamide-immunoreactivity. The neurons with oxytocin- and FMRFamide-like immunoreactivity, however, are often found to be closely intermingled. The results show that coexistence...

  10. + 6 TEKSTER. KARTOGRAFI HYDRA 2013 #3

    DEFF Research Database (Denmark)

    Dinesen, Cort Ross

    2013-01-01

    +6 TEKSTER #3 indeholder en række indlæg, der er relateret til 14 NYE LANDSKABER/HYDRA 9, 2012 #1. Arbejdet med topologien og kartografien omkring tre urbane udsnit i Berlin, Paris og Tokyo har ført til en række udgivelser i GRID og følges op her med en række betragtninger, der perspektiverer denne...... at frembringe de baner, vi må tænke videre i. Denne serie af publikationer rummer også 10 NYE LANDSKABER/HYDRA 10 #2, 2013 og planlægges at blive fulgt op med et HYDRA 11 #4 i 2014. HYDRA refererer til en ø i Grækenland, der siden 2004 har dannet rammen om en sommerskole, der er optaget af KARTOGRAFI, MORFOLOGI...

  11. Isolation of four novel neuropeptides, the hydra-RFamides I-IV, from Hydra magnipapillata

    DEFF Research Database (Denmark)

    Moosler, A; Rinehart, K L; Grimmelikhuijzen, C J

    1996-01-01

    Using a radioimmunoassay for the sequence Arg-Phe-NH2 (RFamide), we have isolated four novel peptides from extracts of Hydra magnipapillata:......Using a radioimmunoassay for the sequence Arg-Phe-NH2 (RFamide), we have isolated four novel peptides from extracts of Hydra magnipapillata:...

  12. Hydra constitutively expresses transcripts involved in vertebrate neural differentiation

    Indian Academy of Sciences (India)

    Sandipan Chatterjee; Shweta Lahudkar; N N Godbole; Surendra Ghaskadbi

    2001-06-01

    The diploblastic Hydra is among the most primitive multicellular organisms. Using cross-hybridization with Xenopus probes, noggin-like transcripts were detected in the hypostome and basal disc of adult Hydra (Pelmatohydra oligactis), regions with properties similar to that of the amphibian organizer. This points to the possibility of a close molecular similarity between the Xenopus and Hydra organizers. The constitutive expression of a noggin-like gene in Hydra may be responsible for its regenerative capacity.

  13. Generation of Transgenic Hydra by Embryo Microinjection

    Science.gov (United States)

    Juliano, Celina E.; Lin, Haifan; Steele, Robert E.

    2014-01-01

    As a member of the phylum Cnidaria, the sister group to all bilaterians, Hydra can shed light on fundamental biological processes shared among multicellular animals. Hydra is used as a model for the study of regeneration, pattern formation, and stem cells. However, research efforts have been hampered by lack of a reliable method for gene perturbations to study molecular function. The development of transgenic methods has revitalized the study of Hydra biology1. Transgenic Hydra allow for the tracking of live cells, sorting to yield pure cell populations for biochemical analysis, manipulation of gene function by knockdown and over-expression, and analysis of promoter function. Plasmid DNA injected into early stage embryos randomly integrates into the genome early in development. This results in hatchlings that express transgenes in patches of tissue in one or more of the three lineages (ectodermal epithelial, endodermal epithelial, or interstitial). The success rate of obtaining a hatchling with transgenic tissue is between 10% and 20%. Asexual propagation of the transgenic hatchling is used to establish a uniformly transgenic line in a particular lineage. Generating transgenic Hydra is surprisingly simple and robust, and here we describe a protocol that can be easily implemented at low cost. PMID:25285460

  14. Target irradiation experiments. [Hydra accelerator

    Energy Technology Data Exchange (ETDEWEB)

    1976-01-01

    Target irradiation experiments have been carried out on the Hydra accelerator, operating at powers between 0.15 and 0.3 TW. As listed in Table I, four types of spherical shell targets have been studied: 3 mm diameter, 200 ..mu..m and 50 ..mu..m wall thickness Au targets; 3 mm diameter, 300 ..mu..m wall thickness plastic targets; and 0.85 mm diameter, 10 ..mu..m wall thickness Ni targets. When compared to a practical range for 700 keV electrons, the ratio of shell thickness to electron range varied between 0.03 for the Ni targets to 1.5 for the thick walled Au targets. Multiple exposure optical holography was utilized to determine ablator velocity, and a one-dimensional hydrodynamical materials code CHARTD was utilized to model target response and infer beam deposition. Energy deposition varied from 1 TW/gm for thick Au targets up to 8 TW/gm for thin Ni targets, and pusher velocities ranged between 0.5 and 3.5 cm/..mu..sec. Neutron production from D/sub 2/ and DT filled Ni exploding pusher targets was measured using Ag and Li activation counters and gated scintillator photomultiplier time of flight detectors.

  15. Evo-devo: Hydra raises its Noggin

    Indian Academy of Sciences (India)

    Kalpana Chandramore; Surendra Ghaskadbi

    2011-08-01

    Noggin, along with other secreted bone morphogenetic protein (BMP) inhibitors, plays a crucial role in neural induction and neural tube patterning as well as in somitogenesis, cardiac morphogenesis and formation of the skeleton in vertebrates. The BMP signalling pathway is one of the seven fundamental pathways that drive embryonic development and pattern formation in animals. Understanding its evolutionary origin and role in pattern formation is, therefore, important to evolutionary developmental biology (evo-devo).We have studied the evolutionary origin of BMP–Noggin antagonism in hydra, which is a powerful diploblastic model to study evolution of pattern-forming mechanisms because of the unusual cellular dynamics during its pattern formation and its remarkable ability to regenerate. We cloned and characterized the noggin gene from hydra and found it to exhibit considerable similarity with its orthologues at the amino acid level. Microinjection of hydra Noggin mRNA led to duplication of the dorsoventral axis in Xenopus embryos, demonstrating its functional conservation across the taxa. Our data, along with those of others, indicate that the evolutionarily conserved antagonism between BMP and its inhibitors predates bilateral divergence. This article reviews the various roles of Noggin in different organisms and some of our recent work on hydra Noggin in the context of evolution of developmental signalling pathways.

  16. The Hydra-k Partial Fields

    NARCIS (Netherlands)

    R. Pendavingh; S.H.M. van Zwam (Stefan)

    2010-01-01

    htmlabstractIn the paper "Confinement of matroid representations to subsets of partial fields" (arXiv:0806.4487) we introduced the Hydra-k partial fields to study quinary matroids with inequivalent representations. The proofs of some results on these partial fields require extensive computations.

  17. Two-color double-labeling in situ hybridization of whole-mount Hydra using RNA probes for five different Hydra neuropeptide preprohormones: evidence for colocalization

    DEFF Research Database (Denmark)

    Hansen, G N; Williamson, M; Grimmelikhuijzen, C J

    2000-01-01

    -terminal sequence Lys-Val-NH2 (Hydra-KVamide). The various Hydra-RFamides are synthesized by three different preprohormones: preprohormone-A, -B, and -C. The various Hydra-LWamides are synthesized by a single preprohormone (prepro-Hydra-LWamide), as is Hydra-KVamide (prepro-Hydra-KVamide). Using a wholemount double-labeling...... exists that expresses both preprohormones-A and preproHydra-KVamide mRNAs. The functional significance of this coexpression is unclear. This is the first report on the coexpression of two well-characterized preprohormones (yielding two well-characterized neurohormone families) in cnidarians. This report...

  18. Isolation of a substance activating foot formation in hydra

    DEFF Research Database (Denmark)

    Grimmelikhuijzen, C J; Schaller, H C

    1977-01-01

    -forming potential of the tissue (2) It does not accelerate head regeneration, nor do the head factors of hydra discovered by Schaller (1973) and Berking (1977) accelerate foot regeneration. We propose that the foot-activating substance is a morphogen responsible for foot formation in hydra. The foot activator can...... be extracted from hydra tissue with methanol and separated from other known morphogens of hydra by gel filtration and ion-exchange chromatography. A substance with similar biological and physicochemical properties can be isolated from sea anemones....

  19. The effects of dopamine synthesis inhibitors and dopamine antagonists on regeneration in the hydra Hydra attenuata.

    Science.gov (United States)

    Ostroumova, T V; Markova, L N

    2002-01-01

    The effects of catecholamine synthesis inhibitors (alpha-methyltyrosine, 3-iodotyrosine, and alpha-methyl-DOPA) and dopamine receptor blockers (haloperidol and spiperone) on the regeneration of apical, gastral, and basal fragments of the hydra Hydra attenuata were studied. These experiments showed that alpha-methyltyrosine and 3-iodotyrosine significantly inhibited regeneration but did not produce morphological anomalies. Alpha-Methyl-DOPA produce less inhibition of regeneration, but induced ectopic tentacles and outgrowths in gastral regenerates. Haloperidol and spiperone had no significant effect on the rate of regeneration but induced significant numbers of morphogenetic anomalies in gastral regenerates. Apical and basal regenerates, which retained their natural organizers (the head and base respectively) never yielded morphogenetic anomalies in the presence of either dopamine receptor blockers or dopamine synthesis inhibitors. The possible role of neurotransmitters. particularly dopamine, in morphogenesis in hydras is discussed.

  20. Bombesin-like immunoreactivity in the nervous system of hydra

    DEFF Research Database (Denmark)

    Grimmelikhuijzen, C J; Dockray, G J; Yanaihara, N

    1981-01-01

    With immunocytochemical methods, nerve cells have been detected in Hydra attenuata containing bombesin-like immunoreactivity. These nerve cells are located in ectoderm of all body regions of the animal and are especially abundant in basal disk and tentacles. Radioimmunoassay of extracts of hydra ...

  1. Neurotensin-like immunoreactivity in the nervous system of hydra

    DEFF Research Database (Denmark)

    Grimmelikhuijzen, C J; Carraway, R E; Rökaeus, A

    1981-01-01

    Neurotensin-like immunoreactivity is found in nerve fibers present in all body regions of hydra. The nerve fibers are especially numerous in the ectoderm at the bases of the tentacles and in the ectoderm at a site just above the foot. Radioimmunoassays of acetic-acid extracts of hydra, using vari...

  2. HYDRA: a decision support model for irrigation water management

    NARCIS (Netherlands)

    Jacucci, G.; Kabat, P.; Verrier, P.J.; Teixeira, J.L.; Steduto, P.; Bertanzon, G.; Giannerini, G.; Huygen, J.; Fernando, R.M.; Hooijer, A.A.; Simons, W.; Toller, G.; Tziallas, G.; Uhrik, C.; Broek, van den B.J.; Vera Munoz, J.; Yovchev, P.

    1995-01-01

    HYDRA introduces information modelling and decision-support systems (DSS) to farmers and authorities in European Mediterranean agriculture in order to improve irrigation practices at different levels. Key components of HYDRA-DSS are a hierarchical setof water balance and crop growth simulation

  3. Bombesin-like immunoreactivity in the nervous system of hydra

    DEFF Research Database (Denmark)

    Grimmelikhuijzen, C J; Dockray, G J; Yanaihara, N

    1981-01-01

    With immunocytochemical methods, nerve cells have been detected in Hydra attenuata containing bombesin-like immunoreactivity. These nerve cells are located in ectoderm of all body regions of the animal and are especially abundant in basal disk and tentacles. Radioimmunoassay of extracts of hydra...

  4. On the Origin of Pluto's Minor Moons, Nix and Hydra

    CERN Document Server

    Lithwick, Yoram

    2008-01-01

    How did Pluto's recently discovered minor moons form? Ward and Canup propose an elegant solution in which Nix and Hydra formed in the collision that produced Charon, then were caught into corotation resonances with Charon, and finally were transported to their current location as Charon migrated outwards. We show with numerical integrations that, if Charon's eccentricity is judiciously chosen, this scenario works beautifully for either Nix or Hydra. However, it cannot work for both Nix and Hydra simultaneously. To transport Nix, Charon's eccentricity must satisfy e_C 0.7 R_p/a_C > 0.04; otherwise migration would be faster than libration, and Hydra would slip out of resonance. These two restrictions conflict. Having ruled out this scenario, we suggest an alternative: that many small bodies were captured from the nebular disk, and they were responsible for forming, migrating and damping Nix and Hydra. If this is true, small moons could be common around large Kuiper belt objects.

  5. HYDRA: a Java library for Markov Chain Monte Carlo

    Directory of Open Access Journals (Sweden)

    Gregory R. Warnes

    2002-03-01

    Full Text Available Hydra is an open-source, platform-neutral library for performing Markov Chain Monte Carlo. It implements the logic of standard MCMC samplers within a framework designed to be easy to use, extend, and integrate with other software tools. In this paper, we describe the problem that motivated our work, outline our goals for the Hydra pro ject, and describe the current features of the Hydra library. We then provide a step-by-step example of using Hydra to simulate from a mixture model drawn from cancer genetics, first using a variable-at-a-time Metropolis sampler and then a Normal Kernel Coupler. We conclude with a discussion of future directions for Hydra.

  6. Three different prohormones yield a variety of Hydra-RFamide (Arg-Phe-NH2) neuropeptides in Hydra magnipapillata

    DEFF Research Database (Denmark)

    Darmer, D; Hauser, F; Nothacker, H P;

    1998-01-01

    from H. magnipapillata, each of which gives rise to a variety of RFamide neuropeptides. Preprohormone A contains one copy of unprocessed Hydra-RFamide I (QWLGGRFG), II (QWFNGRFG), III/IV [(KP)HLRGRFG] and two putative neuropeptide sequences (QLMSGRFG and QLMRGRFG). Preprohormone B has the same general...... organization as preprohormone A, but instead of unprocessed Hydra-RFamide III/IV it contains a slightly different neuropeptide sequence [(KP)HYRGRFG]. Preprohormone C contains one copy of unprocessed Hydra-RFamide I and seven additional putative neuropeptide sequences (with the common N-terminal sequence QWF....../LSGRFGL). The two Hydra-RFamide II copies (in preprohormones A and B) are preceded by Thr residues, and the single Hydra-RFamide III/IV copy (in preprohormone A) is preceded by an Asn residue, confirming that cnidarians use unconventional processing signals to generate neuropeptides from their precursor proteins...

  7. A new species of green hydra (Hydrozoa: Hydrida) from China.

    Science.gov (United States)

    Wang, An-Tai; Deng, Li; Lai, Jing-Qi; Li, Juan

    2009-09-01

    A new species of green freshwater hydra (Cnidaria, Hydrozoa: Hydrida), Hydra sinensis, is described from Guangdong Province, China. The chief distinction between H. sinensis sp. nov. and three other green hydras (H. hadleyi, H. viridissima, and H. plagiodesmica) is in the holotrichous isorhizae. Hydra sinensis sp. nov. differs from H. plagiodesmica in the shape of the holotrichous isorhlzae, and from H. viridissima and H. hadleyi in the tubule of the capsule of the holotrichous isorhlzae. The capsule tubule colls two times in 86% and three times in 14% of holotrlchous isorhlzae (n=50) In H. sinensis sp. nov.; we observed no tubules coiling four times. In contrast, the capsule tubule coils three or four times in H. viridissima and H. hadleyi, and no tubules coiling two times have been reported. In addition, holotrichous isorhlzae, which are mainly located around the hypostome, are sparse in the tentacles of H. sinensis sp. nov., whereas the majority of holotrichous isorhlzae is located on the tentacles in most other hydras. A molecular phylogenetic analysis using the nuclear small subunlt (18S) ribosomal RNA gene Indicated a close relationship between H. sinensis and H. viridissima. Hydra viridissima did not group within a clade of four Individuals of H. sinensis, Indicating a possible sister-species relationship between the two species. Morphological characters in combination with the molecular phylogenetic evidence support Hydra sinensis as a new species.

  8. The Pulsation Spectrum of VX Hydrae

    Science.gov (United States)

    Templeton, M. R.; Samolyk, G.; Dvorak, S.; Poklar, R.; Butterworth, N.; Gerner, H.

    2009-10-01

    We present the results of a two-year, multisite observing campaign investigating the high-amplitude δ Scuti star VX Hydrae during the 2006 and 2007 observing seasons. The final data set consists of nearly 8500 V-band observations spanning HJD 2453763.6 to 2454212.7 (2006 January 28 to 2007 April 22). Separate analyses of the two individual seasons of data yield 25 confidently detected frequencies common to both data sets, of which two are pulsation modes, and the remaining 23 are Fourier harmonics or beat frequencies of these two modes. The 2006 data set had five additional frequencies with amplitudes less than 1.5 mmag, and the 2007 data had one additional frequency. Analysis of the full 2006–2007 data set yields 22 of the 25 frequencies found in the individual seasons of data. There are no significant peaks in the spectrum other than these between 0 and 60 cycles day-1. The frequencies of the two main pulsation modes derived from the 2006 and 2007 observing seasons individually do not differ at the level of 3σ, and thus we find no conclusive evidence for period change over the span of these observations. However, the amplitude of changed significantly between the two seasons, while the amplitude of remained constant; amplitudes of the Fourier harmonics and beat frequencies of f1 also changed. Similar behavior was seen in the 1950s, and it is clear that VX Hydrae undergoes significant amplitude changes over time.

  9. No junctional communication between epithelial cells in hydra

    DEFF Research Database (Denmark)

    de Laat, S W; Tertoolen, L G; Grimmelikhuijzen, C J

    1980-01-01

    junctions between epithelial cells of hydra. However, until now, there has been no report published on whether these junctions enable the epithelial cells to exchange molecules of small molecular weight, as has been described in other organisms. Therefore we decided to investigate the communicative...... properties of the junctional membranes by electrophysiological methods and by intracellular-dye iontophoresis. We report here that no electrotonic coupling is detectable between epithelial cells of Hydra attenuata in: (1) intact animals, (2) head-regenerating animals, (3) cell re-aggregates, and (4) hydra...

  10. IR wireless cluster synapses of HYDRA very large neural networks

    Science.gov (United States)

    Jannson, Tomasz; Forrester, Thomas

    2008-04-01

    RF/IR wireless (virtual) synapses are critical components of HYDRA (Hyper-Distributed Robotic Autonomy) neural networks, already discussed in two earlier papers. The HYDRA network has the potential to be very large, up to 10 11-neurons and 10 18-synapses, based on already established technologies (cellular RF telephony and IR-wireless LANs). It is organized into almost fully connected IR-wireless clusters. The HYDRA neurons and synapses are very flexible, simple, and low-cost. They can be modified into a broad variety of biologically-inspired brain-like computing capabilities. In this third paper, we focus on neural hardware in general, and on IR-wireless synapses in particular. Such synapses, based on LED/LD-connections, dominate the HYDRA neural cluster.

  11. Evidence that polycystins are involved in Hydra cnidocyte discharge.

    Science.gov (United States)

    McLaughlin, Susan

    2017-03-01

    Like other cnidarians, the freshwater organism Hydra is characterized by the possession of cnidocytes (stinging cells). Most cnidocytes are located on hydra tentacles, where they are organized along with sensory cells and ganglion cells into battery complexes. The function of the battery complexes is to integrate multiple types of stimuli for the regulation of cnidocyte discharge. The molecular mechanisms controlling the discharge of cnidocytes are not yet fully understood, but it is known that discharge depends on extracellular Ca(2+) and that mechanically induced cnidocyte discharge can be enhanced by the presence of prey extracts and other chemicals. Experiments in this paper show that a PKD2 (polycystin 2) transient receptor potential (TRP) channel is expressed in hydra tentacles and bases. PKD2 (TRPP) channels belong to the TRP channel superfamily and are non-selective Ca(2+) channels involved in the transduction of both mechanical and chemical stimuli in other organisms. Non-specific PKD2 channel inhibitors Neo (neomycin) and Gd(3+) (gadolinium) inhibit both prey capture and cnidocyte discharge in hydra. The PKD2 activator Trip (triptolide) enhances cnidocyte discharge in both starved and satiated hydra and reduces the inhibition of cnidocyte discharge caused by Neo. PKD1 and 2 proteins are known to act together to transduce mechanical and chemical stimuli; in situ hybridization experiments show that a PKD1 gene is expressed in hydra tentacles and bases, suggesting that polycystins play a direct or indirect role in cnidocyte discharge.

  12. Constant mortality and fertility over age in Hydra.

    Science.gov (United States)

    Schaible, Ralf; Scheuerlein, Alexander; Dańko, Maciej J; Gampe, Jutta; Martínez, Daniel E; Vaupel, James W

    2015-12-22

    Senescence, the increase in mortality and decline in fertility with age after maturity, was thought to be inevitable for all multicellular species capable of repeated breeding. Recent theoretical advances and compilations of data suggest that mortality and fertility trajectories can go up or down, or remain constant with age, but the data are scanty and problematic. Here, we present compelling evidence for constant age-specific death and reproduction rates in Hydra, a basal metazoan, in a set of experiments comprising more than 3.9 million days of observations of individual Hydra. Our data show that 2,256 Hydra from two closely related species in two laboratories in 12 cohorts, with cohort age ranging from 0 to more than 41 y, have extremely low, constant rates of mortality. Fertility rates for Hydra did not systematically decline with advancing age. This falsifies the universality of the theories of the evolution of aging that posit that all species deteriorate with age after maturity. The nonsenescent life history of Hydra implies levels of maintenance and repair that are sufficient to prevent the accumulation of damage for at least decades after maturity, far longer than the short life expectancy of Hydra in the wild. A high proportion of stem cells, constant and rapid cell turnover, few cell types, a simple body plan, and the fact that the germ line is not segregated from the soma are characteristics of Hydra that may make nonsenescence feasible. Nonsenescence may be optimal because lifetime reproduction may be enhanced more by extending adult life spans than by increasing daily fertility.

  13. Effects of predation by Hydra (Cnidaria on cladocerans (Crustacea: Cladocera

    Directory of Open Access Journals (Sweden)

    Ligia Rivera-De la Parra

    2016-03-01

    Full Text Available Planktonic cladocerans have evolved different strategies to avoid predation from vertebrates; these include changes in morphology, behavior, physiology, and/or life-history traits. However, littoral cladocerans are better adapted to avoid invertebrate predation particularly from insect larvae by evolving morphological and physiological adaptations. Nevertheless, this has not been proven for some littoral predators such as Hydra. In this study, we provide quantitative data on how Hydra affects its zooplankton prey. We studied the predation behavior on Alona glabra, Ceridodaphnia dubia, Daphnia pulex, Daphnia cf. mendotae, Diaphanosoma birgei, Macrothrix triserialis, Moina macrocopa, Pleuroxus aduncus, Scapholeberis kingi, Simocephalus vetulus, Elaphoidella grandidieri, Brachionus rubens and Euchlanis dilatata. We also tested the indirect effect of allelochemicals from Hydra on the demography of Daphnia cf. mendotae. Littoral cladocerans are specially adapted to resist nematocyst injection and discharge of toxic substances from Hydra. A significant decrease in the population growth rate from 0.21 to 0.125 d-1 was observed at densities of 2 ind. ml-1. The role of carapace thickness as an adaptive strategy of littoral cladocerans against Hydra predation is discussed.

  14. Multi-wavelength spectrophotometry of EX Hydrae

    CERN Document Server

    Eisenbart, S; Reinsch, K; Gänsicke, B T

    2002-01-01

    We present phase-resolved infrared and optical spectrophotometry of the intermediate polar EX Hya supplemented by archival ultraviolet data. The spin-modulated emission from the accretion funnel and the emission from the accretion disk or ring contain substantial optically thin components. The white dwarf dominates the unmodulated flux in the ultraviolet and is identified by numerous absorption lines. Metal absorption in the accretion curtain may add to the observed spectral features. The secondary star is of spectral type M4+-1 and is detected by its ellipsoidal modulation. We derive a distance of 65+-11 pc which makes EX Hydrae one of the closest cataclysmic variables with a known distance. The luminosity derived from the integrated overall spectral energy distribution is 3x10^32 erg/s. The accretion rate of 3x10^15 g/s (for an 0.6 Msun white dwarf) is in reasonable agreement with the rates expected from angular momentum loss by gravitational radiation and from the observed spin-up of the white dwarf

  15. The pulsation spectrum of VX Hydrae

    CERN Document Server

    Templeton, M R; Dvorak, S; Poklar, R; Butterworth, N; Gerner, H

    2009-01-01

    We present the results of a two-year, multisite observing campaign investigating the high-amplitude delta Scuti star VX Hydrae during the 2006 and 2007 observing seasons. The final data set consists of nearly 8500 V-band observations spanning HJD 2453763.6 to 2454212.7 (2006 January 28 to 2007 April 22). Separate analyses of the two individual seasons of data yield 25 confidently-detected frequencies common to both data sets, of which two are pulsation modes, and the remaining 23 are Fourier harmonics or beat frequencies of these two modes. The 2006 data set had five additional frequencies with amplitudes less than 1.5 mmag, and the 2007 data had one additional frequency. Analysis of the full 2006-2007 data set yields 22 of the 25 frequencies found in the individual seasons of data. There are no significant peaks in the spectrum other than these between 0 and 60 c/d. The frequencies of the two main pulsation modes derived from the 2006 and 2007 observing seasons individually do not differ at the level of 3-si...

  16. Hydra and Niccolo Paganini (1782-1840)--two peas in a pod? The molecular basis of extracellular matrix structure in the invertebrate, Hydra.

    Science.gov (United States)

    Sarras, M P; Deutzmann, R

    2001-08-01

    The body wall of Hydra is organized as an epithelial bilayer with an intervening extracellular matrix (ECM). Molecular and biochemical analyses of Hydra ECM have established that it contains components similar to those seen in more complicated vertebrates such as human. In terms of biophysical parameters, Hydra ECM is highly flexible; a property that facilitates continuous movements along the organism's longitudinal and radial axis. A more rigid ECM, as in vertebrates, would not be compatible with this degree of movement. The flexible nature of Hydra ECM can now be explained in part by the unique structure of the organism's collagens. Interestingly, some aspects of the structural features of Hydra collagens mimic what is seen in Ehlers-Danlos syndrome, an inherited condition in humans that results in an abnormally flexible ECM that can be debilitating in extreme cases. This review will focus on structure-function relationships of the ECM of Hydra.

  17. Hymyc1 downregulation promotes stem cell proliferation in Hydra vulgaris.

    Directory of Open Access Journals (Sweden)

    Alfredo Ambrosone

    Full Text Available Hydra is a unique model for studying the mechanisms underlying stem cell biology. The activity of the three stem cell lineages structuring its body constantly replenishes mature cells lost due to normal tissue turnover. By a poorly understood mechanism, stem cells are maintained through self-renewal while concomitantly producing differentiated progeny. In vertebrates, one of many genes that participate in regulating stem cell homeostasis is the protooncogene c-myc, which has been recently identified also in Hydra, and found expressed in the interstitial stem cell lineage. In the present paper, by developing a novel strategy of RNA interference-mediated gene silencing (RNAi based on an enhanced uptake of small interfering RNAi (siRNA, we provide molecular and biological evidence for an unexpected function of the Hydra myc gene (Hymyc1 in the homeostasis of the interstitial stem cell lineage. We found that Hymyc1 inhibition impairs the balance between stem cell self renewal/differentiation, as shown by the accumulation of stem cell intermediate and terminal differentiation products in genetically interfered animals. The identical phenotype induced by the 10058-F4 inhibitor, a disruptor of c-Myc/Max dimerization, demonstrates the specificity of the RNAi approach. We show the kinetic and the reversible feature of Hymyc1 RNAi, together with the effects displayed on regenerating animals. Our results show the involvement of Hymyc1 in the control of interstitial stem cell dynamics, provide new clues to decipher the molecular control of the cell and tissue plasticity in Hydra, and also provide further insights into the complex myc network in higher organisms. The ability of Hydra cells to uptake double stranded RNA and to trigger a RNAi response lays the foundations of a comprehensive analysis of the RNAi response in Hydra allowing us to track back in the evolution and the origin of this process.

  18. Algal endosymbiosis in brown hydra: host/symbiont specificity.

    Science.gov (United States)

    Rahat, M; Reich, V

    1986-12-01

    Host/symbiont specificity has been investigated in non-symbiotic and aposymbiotic brown and green hydra infected with various free-living and symbiotic species and strains of Chlorella and Chlorococcum. Morphology and ultrastructure of the symbioses obtained have been compared. Aposymbiotic Swiss Hydra viridis and Japanese H. magnipapillata served as controls. In two strains of H. attenuata stable hereditary symbioses were obtained with Chlorococcum isolated from H. magnipapillata. In one strain of H. vulgaris, in H. oligactis and in aposymbiotic H. viridis chlorococci persisted for more than a week. Eight species of free-living Chlorococcum, 10 symbiotic and 10 free-living strains of Chlorella disappeared from the brown hydra within 1-2 days. In H. magnipapillata there was a graded distribution of chlorococci along the polyps. In hypostomal cells there were greater than 30 algae/cell while in endodermal cells of the mid-section or peduncle less than 10 algae/cell were found. In H. attenuata the algal distribution was irregular, there were up to five chlorocci/cell, and up to 20 cells/hydra hosted algae. In the dark most cells of Chlorococcum disappeared from H. magnipapillata and aposymbiotic hydra were obtained. Chlorococcum is thus an obligate phototroph, and host-dependent heterotrophy is not required for the preservation of a symbiosis. The few chlorococci that survived in the dark seem to belong to a less-demanding physiological strain. In variance with known Chlorella/H. viridis endosymbioses the chlorococci in H. magnipapillata and H. attenuata were tightly enveloped in the vacuolar membrane of the hosting cells with no visible perialgal space. Chlorococcum reproduced in these vacuoles and up to eight daughter cells were found within the same vacuole. We suggest that the graded or scant distribution of chlorococci in the various brown hydra, their inability to live in H. viridis and the inability of the various chlorellae to live in brown hydra are the

  19. FMRFamide-like immunoreactivity in the nervous system of Hydra

    DEFF Research Database (Denmark)

    Grimmelikhuijzen, C J; Dockray, G J; Schot, L P

    1982-01-01

    FMRFamide-like immunoreactivity has been localized in different parts of the hydra nervous system. Immunoreactivity occurs in nerve perikarya and processes in the ectoderm of the lower peduncle region near the basal disk, in the ectoderm of the hypostome and in the ectoderm of the tentacles....... The immunoreactive nerve perikarya in the lower peduncle region form ganglion-like structures. Radioimmunoassays of extracts of hydra gave displacement curves parallel to standard FMRFamide and values of at least 8 pmol/gram wet weight of FMRFamide-like immunoreactivity. The immunoreactive material eluted from...

  20. FMRFamide-like immunoreactivity in the nervous system of Hydra

    DEFF Research Database (Denmark)

    Grimmelikhuijzen, C J; Dockray, G J; Schot, L P

    1982-01-01

    FMRFamide-like immunoreactivity has been localized in different parts of the hydra nervous system. Immunoreactivity occurs in nerve perikarya and processes in the ectoderm of the lower peduncle region near the basal disk, in the ectoderm of the hypostome and in the ectoderm of the tentacles...

  1. HydraPower out to make a big bang

    CERN Multimedia

    Revill, John

    2006-01-01

    "An engineering company has provided equipment for a £1.3 billion international project to recreate the conditions of the 'Big Bang". Garry Williams, technical director of hydraPower dynamics, has been asked to return to Switzerland by CERN."

  2. The Origin of Mucosal Immunity: Lessons from the Holobiont Hydra

    Directory of Open Access Journals (Sweden)

    Katja Schroder

    2016-11-01

    Full Text Available Historically, mucosal immunity—i.e., the portion of the immune system that protects an organism’s various mucous membranes from invasion by potentially pathogenic microbes—has been studied in single-cell epithelia in the gastrointestinal and upper respiratory tracts of vertebrates. Phylogenetically, mucosal surfaces appeared for the first time about 560 million years ago in members of the phylum Cnidaria. There are remarkable similarities and shared functions of mucosal immunity in vertebrates and innate immunity in cnidarians, such as Hydra species. Here, we propose a common origin for both systems and review observations that indicate that the ultimately simple holobiont Hydra provides both a new perspective on the relationship between bacteria and animal cells and a new prism for viewing the emergence and evolution of epithelial tissue-based innate immunity. In addition, recent breakthroughs in our understanding of immune responses in Hydra polyps reared under defined short-term gnotobiotic conditions open up the potential of Hydra as an animal research model for the study of common mucosal disorders.

  3. Astrometry and orbits of Nix, Kerberos, AND Hydra

    Energy Technology Data Exchange (ETDEWEB)

    Buie, Marc W. [Southwest Research Institute, 1050 Walnut Street, Suite 300, Boulder, CO 80302 (United States); Grundy, William M. [Lowell Observatory, 1400 West Mars Hill Road, Flagstaff, AZ 86001 (United States); Tholen, David J., E-mail: buie@boulder.swri.edu, E-mail: grundy@lowell.edu, E-mail: tholen@ifa.hawaii.edu [Institute for Astronomy, University of Hawaii, 2680 Woodlawn Drive, Honolulu, HI 96822 (United States)

    2013-12-01

    We present new Hubble Space Telescope observations of three of Pluto's outer moons, Nix, Kerberos, and Hydra. This work revises previously published astrometry of Nix and Hydra from 2002 to 2003. New data from a four-month span during 2007 include observations designed to better measure the positions of Nix and Hydra. A third data set from 2010 also includes data on Nix and Hydra as well as some pre-discovery observations of Kerberos. The data were fitted using numerical point-spread function (PSF) fitting techniques to get accurate positions but also to remove the extended wings of the Pluto and Charon PSFs when working on these faint satellites. The resulting astrometric data were fitted with two-body Keplerian orbits that are useful for short-term predictions of the future positions of these satellites for stellar occultation and for guiding encounter planning for the upcoming New Horizons flyby of the Pluto system. The mutual inclinations of the satellites are all within 0.°2 of the plane of Charon's orbit. The periods for all continue to show that their orbits are near but distinct from integer period ratios relative to Charon. Based on our results, the period ratios are Hydra:Charon = 5.98094 ± 0.00001, Kerberos:Charon = 5.0392 ± 0.0003, and Nix:Charon = 3.89135 ± 0.00001. Based on period ratios alone, there is a trend of increased distance from an integer period ratio with decreasing distance from Charon. Our analysis shows that orbital uncertainties for Nix and Hydra are now low enough to permit useful stellar occultation predictions and for New Horizons encounter planning. In 2015 July, our orbits predict a position error of 60 km for Nix and 38 km for Hydra, well below other limiting errors that affect targeting. The orbit for Kerberos, however, still needs a lot of work as its uncertainty in 2015 is quite large at 22,000 km based on these data.

  4. Ice-related landforms in Hydrae chasma, Mars

    Science.gov (United States)

    Baioni, Davide; Tramontana, Mario

    2016-04-01

    Hydrae Chasma is one of the smaller chasma of Valles Marineris. It is a circular depression approximately 50 kilometers across and 4 kilometers deep, located to the north of Coprates Chasma and south of Juventae Chasma A morphological survey of Hydrae Chasma through an analysis of the available Mars images was performed. The features of the landforms were investigated through an integrated analysis of Reconnaissance Orbiter (MRO) High Resolution Imaging Science Experiment (HiRISE) and Context Camera (CTX) data. Landforms interpreted as due to ice-related processes, resembling similarly ice-related landforms found both in the cold-climate non glacial regions of the Earth, and putatively in other areas of Mars, was observed. These landforms are attributed to the presence of ground ice and/or ice-melting processes reflect significant climatic changes and different climatic conditions than those existing now. Moreover, they appear to display young erosional age, suggesting that are probably of Amazonian age.

  5. The innate immunity in the cnidarian Hydra vulgaris

    Directory of Open Access Journals (Sweden)

    B Altincicek

    2009-08-01

    Full Text Available Hydra vulgaris is currently receiving increased attention as a genetically tractable invertebrate model system for studying important processes of life such as the innate immune defense. Similar to complex animals, H. vulgaris polyps respond to injury by abrupt muscle contraction, by limited escape behavior, and by healing the damaged tissue. Simultaneously, cellular processes such as phagocytosis and programmed cell death as well as the massive production of antimicrobial peptides are induced. Recent studies identified several molecular pathways controlling these responses; however, the interdependence of innate immunity and, for example, regeneration and tissue remodeling is not well elucidated yet. H. vulgaris belongs to the Cnidaria representing the phylogenic sister group of bilaterian animals; hence, a better understanding of evolutionarily conserved as well as Hydra/Cnidaria-specific immune responses will provide deep insight into both origin and evolution of the animal innate immune system

  6. An EUV Study of the Intermediate Polar EX Hydrae

    CERN Document Server

    Belle, K E; Sirk, M; Huber, M E; Belle, Kunegunda E.; Howell, Steve B.; Sirk, Martin; Huber, Mark E.

    2002-01-01

    On 2000 May 5, we began a large multi-wavelength campaign to study the intermediate polar, EX Hydrae. The simultaneous observations from six satellites and four telescopes were centered around a one million second observation with EUVE. Although EX Hydrae has been studied previously with EUVE, our higher signal-to-noise observations present new results and challenge the current IP models. Previously unseen dips in the light curve are reminiscent of the stream dips seen in polar light curves. Also of interest is the temporal extent of the bulge dip; approximately 0.5 in phase, implying that the bulge extends over half of the accretion disk. We propose that the magnetic field in EX Hydrae is strong enough (a few MG) to begin pulling material directly from the outer edge of the disk, thereby forming a large accretion curtain which would produce a very broad bulge dip. This would also result in magnetically controlled accretion streams originating from the outer edge of the disk. We also present a period analysis...

  7. Hydra-TH Extensions for Multispecies and Thermosolutal Convection

    Energy Technology Data Exchange (ETDEWEB)

    Stagg, Alan K [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States; Yoon, Su-Jong [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-09-01

    This report describes the Consortium for Advanced Simulation of Light Water Reactors (CASL) work conducted for completion of the Thermal Hydraulics Methods (THM) Level 3 Milestone THM.CFD.P11.02: Hydra-TH Extensions for Multispecies and Thermosolutal Convection. A critical requirement for modeling reactor thermal hydraulics is to account for species transport within the fluid. In particular, this capability is needed for modeling transport and diffusion of boric acid within water for emergency, reactivity-control scenarios. To support this need, a species transport capability has been implemented in Hydra-TH for binary systems (for example, solute within a solvent). A species transport equation is solved for the species (solute) mass fraction, and both thermal and solutal buoyancy effects are handled with specification of a Boussinesq body force. Species boundary conditions can be specified with a Dirichlet condition on mass fraction or a Neumann condition on diffusion flux. To enable enhanced species/fluid mixing in turbulent flow, the molecular diffusivity for the binary system is augmented with a turbulent diffusivity in the species transport calculation. The new capabilities are demonstrated by comparison of Hydra-TH calculations to the analytic solution for a thermosolutal convection problem, and excellent agreement is obtained.

  8. Evolutionary Analysis of Minor Histocompatibility Genes In Hydra

    KAUST Repository

    Aalismail, Nojood

    2016-05-01

    Hydra is a simple freshwater solitary polyp used as a model system to study evolutionary aspects. The immune response of this organism has not been studied extensively and the immune response genes have not been identified and characterized. On the other hand, immune response has been investigated and genetic analysis has been initiated in other lower invertebrates. In the present study we took initiative to study the self/nonself recognition in hydra and its relation to the immune response. Moreover, performing phylogenetic analysis to look for annotated immune genes in hydra gave us a potential to analyze the expression of minor histocompatibility genes that have been shown to play a major role in grafting and transplantation in mammals. Here we obtained the cDNA library that shows expression of minor histocompatibility genes and confirmed that the annotated sequences in databases are actually present. In addition, grafting experiments suggested, although still preliminary, that homograft showed less rejection response than in heterograft. Involvement of possible minor histocompatibility gene orthologous in immune response was examined by qPCR.

  9. Conservation of the nucleotide excision repair pathway: characterization of hydra Xeroderma Pigmentosum group F homolog.

    Directory of Open Access Journals (Sweden)

    Apurva Barve

    Full Text Available Hydra, one of the earliest metazoans with tissue grade organization and nervous system, is an animal with a remarkable regeneration capacity and shows no signs of organismal aging. We have for the first time identified genes of the nucleotide excision repair (NER pathway from hydra. Here we report cloning and characterization of hydra homolog of xeroderma pigmentosum group F (XPF gene that encodes a structure-specific 5' endonuclease which is a crucial component of NER. In silico analysis shows that hydra XPF amino acid sequence is very similar to its counterparts from other animals, especially vertebrates, and shows all features essential for its function. By in situ hybridization, we show that hydra XPF is expressed prominently in the multipotent stem cell niche in the central region of the body column. Ectoderm of the diploblastic hydra was shown to express higher levels of XPF as compared to the endoderm by semi-quantitative RT-PCR. Semi-quantitative RT-PCR analysis also demonstrated that interstitial cells, a multipotent and rapidly cycling stem cell lineage of hydra, express higher levels of XPF mRNA than other cell types. Our data show that XPF and by extension, the NER pathway is highly conserved during evolution. The prominent expression of an NER gene in interstitial cells may have implications for the lack of senescence in hydra.

  10. Substance P-like immunoreactivity in the nervous system of hydra

    DEFF Research Database (Denmark)

    Grimmelikhuijzen, C J; Balfe, A; Emson, P C

    1981-01-01

    Using immunocytochemistry we find substance P-like material in nerve cells of hydra. These nerve cells are situated in the ectoderm of the basal disk and tentacles. Radioimmunoassay of hydra extracts gives dilution curves parallel to that of synthetic substance P, from which it can be calculated ...

  11. A peptide-gated ion channel from the freshwater polyp Hydra

    DEFF Research Database (Denmark)

    Golubovic, Andjelko; Kuhn, Anne; Williamson, Michael;

    2007-01-01

    regarded as a curiosity, and it was not known whether peptide-gated ionotropic receptors are also present in other animal groups. Nervous systems first evolved in cnidarians, which extensively use neuropeptides. Here we report cloning from the freshwater cnidarian Hydra of a novel ion channel (Hydra sodium...

  12. Revisiting the age, evolutionary history and species level diversity of the genus Hydra (Cnidaria: Hydrozoa).

    Science.gov (United States)

    Schwentner, Martin; Bosch, Thomas C G

    2015-10-01

    The genus Hydra has long served as a model system in comparative immunology, developmental and evolutionary biology. Despite its relevance for fundamental research, Hydra's evolutionary origins and species level diversity are not well understood. Detailed previous studies using molecular techniques identified several clades within Hydra, but how these are related to described species remained largely an open question. In the present study, we compiled all published sequence data for three mitochondrial and nuclear genes (COI, 16S and ITS), complemented these with some new sequence data and delimited main genetic lineages (=hypothetical species) objectively by employing two DNA barcoding approaches. Conclusions on the species status of these main lineages were based on inferences of reproductive isolation. Relevant divergence times within Hydra were estimated based on relaxed molecular clock analyses with four genes (COI, 16S, EF1α and 28S) and four cnidarians fossil calibration points All in all, 28 main lineages could be delimited, many more than anticipated from earlier studies. Because allopatric distributions were common, inferences of reproductive isolation often remained ambiguous but reproductive isolation was rarely refuted. Our results support three major conclusions which are central for Hydra research: (1) species level diversity was underestimated by molecular studies; (2) species affiliations of several crucial 'workhorses' of Hydra evolutionary research were wrong and (3) crown group Hydra originated ∼200mya. Our results demonstrate that the taxonomy of Hydra requires a thorough revision and that evolutionary studies need to take this into account when interspecific comparisons are made. Hydra originated on Pangea. Three of four extant groups evolved ∼70mya ago, possibly on the northern landmass of Laurasia. Consequently, Hydra's cosmopolitan distribution is the result of transcontinental and transoceanic dispersal. Copyright © 2015 Elsevier Inc

  13. 水螅的替代食物筛选%Selection of substitute food for hydra

    Institute of Scientific and Technical Information of China (English)

    方小龙; 董卫兵; 喻飞; 陈百香; 丁冉; 胡好远

    2011-01-01

    Food is always scarce when hydra was cultured. In this article , in order to obtain the substituting food for hydra, the feeding behaviors of hydra were compared. The results showed that hydra could catch meats of earthworm, shrimp, fish, chicken, beef and pork. There was no significant difference in the frequency when hydra caught those foods. But the eating frequencies of hydra to those foods were significantly different. Hydra prefers shrimp meat. When the food is scare during culture , the shrimp meat might be selected as a substituting food.%在水螅的培养中,常出现食物缺乏.为了获得替代食物,比较水螅对一些常见肉类的捕食行为.结果表明,水螅对蚯蚓肉、虾肉、鱼肉、鸡肉、牛肉和猪肉均能捕捉,对各食物的捕捉比例无显著差异;但水螅对食物的摄食比例在食物类型间存在显著差异,对虾肉较为偏好.可选择虾肉作为培养时的替代食物.

  14. Ultraviolet irradiation initiates ectopic foot formation in regenerating hydra and promotes budding

    Indian Academy of Sciences (India)

    Saroj S Ghaskadbi; Leena Shetye; Shashi Chiplonkar; Surendra Ghaskadbi

    2005-03-01

    We have studied the effects of ultraviolet-C (UVC) and Ultraviolet-B (UVB) on growth and pattern formation in Pelmatohydra oligactis. UVC brings about a significant increase in budding in intact hydra while UVB does not exhibit such an effect. Excessive budding could be a response for survival at wavelengths that damage biological tissues. If the head or base piece of a bisected hydra is irradiated and recombined with the unirradiated missing part, regeneration proceeds normally indicating that exposure of a body part with either an intact head or foot to UVC does not influence pattern formation. Most significantly, in the middle piece, but not in the head or the base piece of a trisected hydra, UVC leads to initiation of ectopic feet formation in almost one third of the cases. Thus, UV irradiation interferes with pattern formation in regenerating hydra, possibly by changing positional values, and promotes budding in intact hydra. This is the first report on induction of ectopic feet formation by UV in regenerating hydra and opens up the possibility of using UV irradiation as a tool to understand pattern formation in the enigmatic hydra.

  15. The Hydra FGFR, Kringelchen, partially replaces the Drosophila Heartless FGFR.

    Science.gov (United States)

    Rudolf, Anja; Hübinger, Christine; Hüsken, Katrin; Vogt, Angelika; Rebscher, Nicole; Onel, Susanne-Filiz; Renkawitz-Pohl, Renate; Hassel, Monika

    2013-05-01

    Fibroblast growth factor receptors (FGFR) are highly conserved receptor tyrosine kinases, and evolved early in metazoan evolution. In order to investigate their functional conservation, we asked whether the Kringelchen FGFR in the freshwater polyp Hydra vulgaris, is able to functionally replace FGFR in fly embryos. In Drosophila, two endogenous FGFR, Breathless (Btl) and Heartless (Htl), ensure formation of the tracheal system and mesodermal cell migration as well as formation of the heart. Using UAS-kringelchen-5xmyc transgenic flies and targeted expression, we show that Kringelchen is integrated correctly into the cell membrane of mesodermal and tracheal cells in Drosophila. Nevertheless, Kringelchen expression driven in tracheal cells failed to rescue the btl (LG19) mutant. The Hydra FGFR was able to substitute for Heartless in the htl (AB42) null mutant; however, this occurred only during early mesodermal cell migration. Our data provide evidence for functional conservation of this early-diverged FGFR across these distantly related phyla, but also selectivity for the Htl FGFR in the Drosophila system.

  16. The 2006-2007 Observing Campaign On VX Hydrae

    Science.gov (United States)

    Templeton, Matthew R.; Samolyk, G.; Dvorak, S.; Poklar, R.; Butterworth, N.; Gerner, H. S.

    2009-12-01

    We present the results of the 2006-2007 observing campaign on the double-mode delta Scuti star VX Hydrae. Nearly 8800 V-band CCD observations were obtained during the two observing seasons. Although the data were taken with small telescopes (0.3-m or less, using consumer-grade CCD cameras), the data quality is very high, enabling the detection of variability at the millimagnitude level at some frequencies. Analysis of the data yields only two primary pulsation frequencies: f(0) = 4.4765 c/d, and f(1) = 5.7899 c/d. The two modes have comparable amplitude, although the amplitude of f(1) appears to have increased slightly from 2006 to 2007 by 0.01 mag. Only two pulsation modes are detected, but at least 18 additional linear combination frequencies are also clearly detected, some having amplitudes as low as 1 mmag, resulting in an incredibly rich Fourier spectrum. We discuss the evidence for amplitude variation in VX Hydrae, along with prospects for future study of this and other similar delta Scuti stars by AAVSO observers.

  17. Biometric and statistical investigations on the cnidoma of the genus Hydra (Cnidaria, Hydrozoa

    Directory of Open Access Journals (Sweden)

    Maria I. Deserti

    2012-09-01

    Full Text Available This paper deals about the nematocysts like a source of biometric information for comparison between the species Hydra vulgaris Pallas, 1766, Hydra vulgaris pedunculata Deserti et al., 2011 and Hydra pseudoligactis (Hyman, 1931. This biometric tool lets us carry out statistical comparisons and adding these results to the identification of specimens from different classificatory groups. In this particular study, we obtained significant differences between species, individuals of each species and nematocysts type when compared the biometry of its nematocysts. Another result was the variation in of particular nematocysts, like atrichous isorhiza and holotrichous isorhiza for the species H. vulgaris in relation to the column size.

  18. The Nearest Isolated Member of the TW Hydrae Association is a Giant Planet Analog

    CERN Document Server

    Kellogg, Kendra; Gagne, Jonathan; Faherty, Jacqueline

    2016-01-01

    In a recent search for unusually red L and T dwarfs, we identified 2MASS J11193254-1137466 as a likely young L7 dwarf and potential member of the TW Hydrae association. We present spectra that confirm the youth of this object. We also measure a radial velocity of 8.5 +/- 3.3 km/s that, together with the sky position, proper motion and photometric distance, results in a 92% probability of membership in the TW Hydrae association, with a calibrated field contamination probability of 0.0005% using the BANYAN II tool. Using the age of TW Hydrae and the luminosity of 2MASS J11193254-1137466, we estimate its mass to be 4.3--7.6 MJup. It is the lowest-mass and nearest isolated member of TW Hydrae at a kinematic distance of 28.9 +/- 3.6 pc, and the second-brightest isolated <10 MJup object discovered to date.

  19. Modifications to hydra-gym equipment provide for clinically useful strength measurements.

    Science.gov (United States)

    Tremblay, M S; Lovely, D F; McInnis, M D; Sexsmith, J R

    1994-04-01

    Modifications were made to the Series III-311 Omnikinetic Hydra-Gym apparatus (Hydra-Fitness Industries Inc., Belton, TX) in an effort to provide relatively inexpensive yet clinically useful isokinetic strength measurements. Signal transmission and processing functions were installed to calculate relevant strength characteristics for knee extension/flexion motions. Results from the modified Hydra-Gym were compared with matched procedures on the Kin-Com (model 500-10, Chattecx Corporation, Chattanooga, TN). Subjects (N = 10) performed three maximal concentric right knee extension/flexion cycles at different resistance settings (2, 4, and 6) on the Hydra-Gym and the corresponding angular velocities on the Kin-Com (190, 125, and 40 degrees/sec, respectively). Each subject completed eight testing sessions, four on each dynamometer. A five-way analysis of variance on the peak torque data revealed no significant difference between dynamometers; however, there was a significant interaction between dynamometer and extension/flexion measurements. The variance in angle of peak torque data was significantly different between dynamometers, with Hydra-Gym showing superior reproducibility (p Gym because the interaction noticed between dynamometer and extension/flexion may exaggerate muscle imbalances. In summary, modifications to the Hydra-Gym appear to provide clinicians with a reliable and clinically useful strength testing alternative.

  20. Immunochemical Localization of GABAA Receptor Subunits in the Freshwater Polyp Hydra vulgaris (Cnidaria, Hydrozoa).

    Science.gov (United States)

    Concas, A; Imperatore, R; Santoru, F; Locci, A; Porcu, P; Cristino, L; Pierobon, P

    2016-11-01

    γ-aminobutyric acid (GABA) receptors, responding to GABA positive allosteric modulators, are present in the freshwater polyp Hydra vulgaris (Cnidaria, Hydrozoa), one of the most primitive metazoans to develop a nervous system. We examined the occurrence and distribution of GABAA receptor subunits in Hydra tissues by western blot and immunohistochemistry. Antibodies against different GABAA receptor subunits were used in Hydra membrane preparations. Unique protein bands, inhibited by the specific peptide, appeared at 35, 60, ∼50 and ∼52 kDa in membranes incubated with α3, β1, γ3 or δ antibodies, respectively. Immunohistochemical screening of whole mount Hydra preparations revealed diffuse immunoreactivity to α3, β1 or γ3 antibodies in tentacles, hypostome, and upper part of the gastric region; immunoreactive fibers were also present in the lower peduncle. By contrast, δ antibodies revealed a strong labeling in the lower gastric region and peduncle, as well as in tentacles. Double labeling showed colocalization of α3/β1, α3/γ3 and α3/δ immunoreactivity in granules or cells in tentacles and gastric region. In the peduncle, colocalization of both α3/β1 and α3/γ3 immunoreactivity was found in fibers running horizontally above the foot. These data indicate that specific GABAA receptor subunits are present and differentially distributed in Hydra body regions. Subunit colocalization suggests that Hydra GABA receptors are heterologous multimers, possibly sub-serving different physiological activities.

  1. Evidence That Hydra I is a Tidally Disrupting Milky Way Dwarf Galaxy

    CERN Document Server

    Hargis, Jonathan R; Willman, B; Caldwell, N; Walker, M G; Strader, J; Sand, D J; Grillmair, C J; Yoon, J H

    2015-01-01

    The Eastern Banded Structure (EBS) and Hydra~I halo overdensity are very nearby (d $\\sim$ 10 kpc) objects discovered in SDSS data. Previous studies of the region have shown that EBS and Hydra I are spatially coincident, cold structures at the same distance, suggesting that Hydra I may be the EBS's progenitor. We combine new wide-field DECam imaging and MMT/Hectochelle spectroscopic observations of Hydra I with SDSS archival spectroscopic observations to quantify Hydra I's present-day chemodynamical properties, and to infer whether it originated as a star cluster or dwarf galaxy. While previous work using shallow SDSS imaging assumed a standard old, metal-poor stellar population, our deeper DECam imaging reveals that Hydra~I has a thin, well-defined main sequence turnoff of intermediate age ($\\sim 5-6$ Gyr) and metallicity ([Fe/H] = $-0.9$ dex). We measure statistically significant spreads in both the iron and alpha-element abundances of $\\sigma_{[Fe/H]} = 0.13 \\pm 0.02$ dex and $\\sigma_{[\\alpha/{\\rm Fe}]} = 0...

  2. Environmental challenges improve resource utilization for asexual reproduction and maintenance in hydra.

    Science.gov (United States)

    Schaible, Ralf; Ringelhan, Felix; Kramer, Boris H; Miethe, Tanja

    2011-10-01

    Variation in life history can reflect genetic differences, and may be caused by environmental effects on phenotypes. Understanding how these two sources of life history variation interact to express an optimal allocation of resources in a changing environment is central to life history theory. This study addresses variation in the allocation of resources to asexual reproduction and to maintenance of Hydra magnipapillata in relation to differences in temperature and food availability. Hydra is a non-senescent, persistent species with primarily clonal reproduction. We recorded changes in budding rate and mean survival under starvation, which indicate changes in the allocation of resources to asexual reproduction and maintenance. In constant conditions we observed a clear trade-off between asexual reproduction and maintenance, where budding increased linearly with food intake while starvation survival stayed rather constant. In contrast, an environment with fluctuations in temperature or food availability promotes maintenance and increases the survival chances of hydra under starvation. Surprisingly, asexual reproduction also tends to be positively affected by fluctuating environmental conditions, which suggests that in this case there is no clear trade-off between asexual reproduction and maintenance in hydra. Environmental stresses have a beneficial impact on the fitness-related phenotypical traits of the basal metazoan hydra. The results indicate that, if the stress occurs in hormetic doses, variable stressful and fluctuating environments can be salutary for hydra. A closer examination of this dynamic can therefore enable us to develop a deeper understanding of the evolution of aging and longevity.

  3. Hydra: a service oriented architecture for scientific simulation integration

    Energy Technology Data Exchange (ETDEWEB)

    Bent, Russell [Los Alamos National Laboratory; Djidjev, Tatiana [Los Alamos National Laboratory; Hayes, Birch P [Los Alamos National Laboratory; Holland, Joe V [Los Alamos National Laboratory; Khalsa, Hari S [Los Alamos National Laboratory; Linger, Steve P [Los Alamos National Laboratory; Mathis, Mark M [Los Alamos National Laboratory; Mniszewski, Sue M [Los Alamos National Laboratory; Bush, Brian [NATIONAL RENEWABLE ENERGY LAB

    2008-01-01

    One of the current major challenges in scientific modeling and simulation, in particular in the infrastructure-analysis community, is the development of techniques for efficiently and automatically coupling disparate tools that exist in separate locations on different platforms, implemented in a variety of languages and designed to be standalone. Recent advances in web-based platforms for integrating systems such as SOA provide an opportunity to address these challenges in a systematic fashion. This paper describes Hydra, an integrating architecture for infrastructure modeling and simulation that defines geography-based schemas that, when used to wrap existing tools as web services, allow for seamless plug-and-play composability. Existing users of these tools can enhance the value of their analysis by assessing how the simulations of one tool impact the behavior of another tool and can automate existing ad hoc processes and work flows for integrating tools together.

  4. Effects of water hardness and alkalinity on the toxicity of uranium to a tropical freshwater hydra (Hydra viridissima).

    Science.gov (United States)

    Riethmuller, N; Markich, S J; Van Dam, R A; Parry, D

    2001-01-01

    In tropical Australian freshwaters, uranium (U) is of potential ecotoxicological concern, largely as a consequence of mining activities. Although the toxicity of uranium to Australian freshwater biota is comprehensive, by world standards, few data are available on the effects of physicochemical variables, such as hardness, alkalinity, pH and organic matter, on uranium speciation and bioavailability. This study determined the individual effects of water hardness (6.6, 165 and 330 mg l(-1) as CaCO3) and alkalinity (4.0 and 102 mg l(-1) as CaCO3), at a constant pH (6.0), on the toxicity (96 h population growth) of uranium to Hydra viridissima (green hydra). A 50-fold increase in hardness (Ca and Mg concentration) resulted in a 92% (two-fold) decrease in the toxicity of uranium to H. viridissima [i.e. an increase in the EC50 value and 95% confidence interval from 114 (107-121) to 219 (192-246) µg l(-1)]. Conversely, at a constant hardness (165 mg l-1 as CaCO3), the toxicity of uranium to H. viridissima was not significantly (P > 0.05) affected by a 25-fold increase in alkalinity (carbonate concentration) [i.e. EC50 values of 177 (166-188) and 171 (150-192) µg l(-1) at 4.0 and 102 mg l(-1) as CaCO3, respectively]. A knowledge of the relationship between water chemistry variables, including hardness and alkalinity, and uranium toxicity is useful for predicting the potential ecological detriment in aquatic systems, and can be used to relax national water quality guidelines on a site-specific basis.

  5. Three homologous subunits form a high affinity peptide-gated ion channel in Hydra

    DEFF Research Database (Denmark)

    Dürrnagel, Stefan; Kuhn, Anne; Tsiairis, Charisios D

    2010-01-01

    properties, like a low Na(+) selectivity and a low amiloride affinity, that are different from other channels of the DEG/ENaC gene family, suggesting that a component of the native Hydra channel might still be lacking. Here, we report the cloning of a new ion channel subunit from Hydra, HyNaC5. The new......Recently, three ion channel subunits of the degenerin (DEG)/epithelial Na(+) channel (ENaC) gene family have been cloned from the freshwater polyp Hydra magnipapillata, the Hydra Na(+) channels (HyNaCs) 2-4. Two of them, HyNaC2 and HyNaC3, co-assemble to form an ion channel that is gated...... by the neuropeptides Hydra-RFamides I and II. The HyNaC2/3 channel is so far the only cloned ionotropic receptor from cnidarians and, together with the related ionotropic receptor FMRFamide-activated Na(+) channel (FaNaC) from snails, the only known peptide-gated ionotropic receptor. The HyNaC2/3 channel has pore...

  6. Development and population growth of Hydra viridissima Pallas, 1766 (Cnidaria, Hydrozoa in the laboratory

    Directory of Open Access Journals (Sweden)

    FC. Massaro

    Full Text Available Hydras, the most representative freshwater Cnidaria, are of common occurrence in bodies of water in every continent except Antarctica. This study was planned with the aim of maintaining a population of Hydra viridissima in laboratory culture to enable the determination of the individual and population growth-rates of this species, as well as its population doubling time and generation time, with a view to employing these common animals as test-organisms in ecotoxicological assays. The organisms were maintained in reconstituted water at 20 ± 2 °C, illuminated at 800 lux with a photoperiod of 12 hours light: 12 hours dark, and were fed on neonates of the cladoceran Ceriodaphnia silvestrii (3 or 4 neonates per hydra, 3 times a week. The individual growth-rate (k of the species was 0.43, the maximum length of the column 2.53 mm and the generation time 6.6 ± 1.5 days on average. The hydra population showed an intrinsic growth-rate (r of 0.0468, according to the fitted curve, and a doubling time of 14.8 ± 2.63 days. Hydra viridissima is easy to grow in the laboratory and performs well in the conditions used in this study. It is thus a promising candidate test-organism for ecotoxicological studies.

  7. Development and population growth of Hydra viridissima Pallas, 1766 (Cnidaria, Hydrozoa) in the laboratory.

    Science.gov (United States)

    Massaro, F C; Rocha, O

    2008-05-01

    Hydras, the most representative freshwater Cnidaria, are of common occurrence in bodies of water in every continent except Antarctica. This study was planned with the aim of maintaining a population of Hydra viridissima in laboratory culture to enable the determination of the individual and population growth-rates of this species, as well as its population doubling time and generation time, with a view to employing these common animals as test-organisms in ecotoxicological assays. The organisms were maintained in reconstituted water at 20 +/- 2 degrees C, illuminated at 800 lux with a photoperiod of 12 hours light: 12 hours dark, and were fed on neonates of the cladoceran Ceriodaphnia silvestrii (3 or 4 neonates per hydra, 3 times a week). The individual growth-rate (k) of the species was 0.43, the maximum length of the column 2.53 mm and the generation time 6.6 +/- 1.5 days on average. The hydra population showed an intrinsic growth-rate (r) of 0.0468, according to the fitted curve, and a doubling time of 14.8 +/- 2.63 days. Hydra viridissima is easy to grow in the laboratory and performs well in the conditions used in this study. It is thus a promising candidate test-organism for ecotoxicological studies.

  8. The phosphatidylserine receptor from Hydra is a nuclear protein with potential Fe(II dependent oxygenase activity

    Directory of Open Access Journals (Sweden)

    Stiening Beate

    2004-06-01

    Full Text Available Abstract Background Apoptotic cell death plays an essential part in embryogenesis, development and maintenance of tissue homeostasis in metazoan animals. The culmination of apoptosis in vivo is the phagocytosis of cellular corpses. One morphological characteristic of cells undergoing apoptosis is loss of plasma membrane phospholipid asymmetry and exposure of phosphatidylserine on the outer leaflet. Surface exposure of phosphatidylserine is recognised by a specific receptor (phosphatidylserine receptor, PSR and is required for phagocytosis of apoptotic cells by macrophages and fibroblasts. Results We have cloned the PSR receptor from Hydra in order to investigate its function in this early metazoan. Bioinformatic analysis of the Hydra PSR protein structure revealed the presence of three nuclear localisation signals, an AT-hook like DNA binding motif and a putative 2-oxoglutarate (2OG-and Fe(II-dependent oxygenase activity. All of these features are conserved from human PSR to Hydra PSR. Expression of GFP tagged Hydra PSR in hydra cells revealed clear nuclear localisation. Deletion of one of the three NLS sequences strongly diminished nuclear localisation of the protein. Membrane localisation was never detected. Conclusions Our results suggest that Hydra PSR is a nuclear 2-oxoglutarate (2OG-and Fe(II-dependent oxygenase. This is in contrast with the proposed function of Hydra PSR as a cell surface receptor involved in the recognition of apoptotic cells displaying phosphatidylserine on their surface. The conservation of the protein from Hydra to human infers that our results also apply to PSR from higher animals.

  9. Hydra-TH User's Manual, Version: LA-CC-11120, Dated: December 1, 2011

    Energy Technology Data Exchange (ETDEWEB)

    Christon, Mark A. [Los Alamos National Laboratory; Bakosi, Jozsef [Los Alamos National Laboratory; Lowrie, Robert B. [Los Alamos National Laboratory

    2012-07-19

    Hydra-TH is a hybrid finite-element/finite-volume code built using the Hydra toolkit specifically to attack a broad class of incompressible, viscous fluid dynamics problems prevalent in the thermalhydraulics community. The purpose for this manual is provide sufficient information for an experience analyst to use Hydra-TH in an effective way. The Hydra-TH User's Manual present a brief overview of capabilities and visualization interfaces. The execution and restart models are described before turning to the detailed description of keyword input. Finally, a series of example problems are presented with sufficient data to permit the user to verify the local installation of Hydra-TH, and to permit a convenient starting point for more detailed and complex analyses.

  10. The cluster-scale AGN outburst in Hydra A

    CERN Document Server

    Nulsen, P E J; Wise, M W; David, L P

    2004-01-01

    Deep Chandra observations of the Hydra A Cluster reveal a feature in the X-ray surface brightness that surrounds the 330 MHz radio lobes of the AGN at the cluster center. Surface brightness profiles of this feature and its close association with the radio lobes argue strongly that it is a shock front driven by the expanding radio lobes. The Chandra image also reveals other new structure on smaller scales that is associated with the radio source, including a large cavity and filament. The shock front extends 200 - 300 kpc from the AGN at the cluster center and its strength varies along the front, with Mach numbers in the range ~ 1.2 - 1.4. It is stronger where it is more distant from the cluster center, as expected for a shock driven by expanding radio lobes. Simple modeling gives an age for the shock front ~ 1.4\\times10^8 y and a total energy driving it of ~ 10^{61} erg. The mean mechanical power driving the shock is comparable to quasar luminosities, well in excess of that needed to regulate the cooling core...

  11. Distance and Kinematics of the TW Hydrae Association from Parallaxes

    CERN Document Server

    Weinberger, Alycia J; Boss, Alan P

    2012-01-01

    From common proper motion and signatures of youth, researchers have identified about 30 members of a putative TW Hydrae Association. Only four of these had parallactic distances from Hipparcos. We have measured parallaxes and proper motions for 14 primary members. We combine these with literature values of radial velocities to show that the Galactic space motions of the stars, with the exception of TWA 9 and 22, are parallel and do not indicate convergence at a common formation point sometime in the last few million years. The space motions of TWA 9 and 22 do not agree with the others and indicate that they are not TWA members. The median parallax is 18 mas or 56 pc. We further analyze the stars' absolute magnitudes on pre-main sequence evolutionary tracks and find a range of ages with a median of 10.1 Myr and no correlation between age and Galactic location. The TWA stars may have formed from an extended and filamentary molecular cloud but are not necessarily precisely coeval.

  12. Progress and status of cryogenic refrigeration system for project Hydra

    Science.gov (United States)

    Yuan, J.; Catseman, F.; Tilleman, H.; Henderson, N.

    2015-12-01

    In the last two decades, HTS cables have been successfully demonstrated around the world, preparing HTS power cables for a full commercial introduction. Among the demonstration projects, circulating subcooled liquid nitrogen to maintain the HTS cable at operating temperature is a widely adopted approach. In this approach, the cooling systems are absolutely critical to the successful operation of the HTS cables. This paper describes the progress and status of the cryogenic refrigeration system designed and manufactured for project Hydra, which is a project jointly funded by the U.S. Department of Homeland Security Science and Technology Directorate, American Superconductor and Consolidated Edison Company of New York, Inc. American Superconductor is leading the team supported by Con Edison, Ultera, Altran Solutions, and DH Industries. The cable is an inherently fault current limiting HTS cable, approximately 200 m long and designed to carry 96 MVA at a distribution level voltage of 13.8 kV. The cable will be installed and energized near New York City. The refrigeration system was designed and manufactured by DH Industries. This paper provides details on the successful factory acceptance testing completed in November 2014.

  13. Phylogenetic placement of Hydra and relationships within Aplanulata (Cnidaria: Hydrozoa).

    Science.gov (United States)

    Nawrocki, Annalise M; Collins, Allen G; Hirano, Yayoi M; Schuchert, Peter; Cartwright, Paulyn

    2013-04-01

    The model organism Hydra belongs to the hydrozoan clade Aplanulata. Despite being a popular model system for development, little is known about the phylogenetic placement of this taxon or the relationships of its closest relatives. Previous studies have been conflicting regarding sister group relationships and have been unable to resolve deep nodes within the clade. In addition, there are several putative Aplanulata taxa that have never been sampled for molecular data or analyzed using multiple markers. Here, we combine the fast-evolving cytochrome oxidase 1 (CO1) mitochondrial marker with mitochondrial 16S, nuclear small ribosomal subunit (18S, SSU) and large ribosomal subunit (28S, LSU) sequences to examine relationships within the clade Aplanulata. We further discuss the relative contribution of four different molecular markers to resolving phylogenetic relationships within Aplanulata. Lastly, we report morphological synapomorphies for some of the major Aplanulata genera and families, and suggest new taxonomic classifications for two species of Aplanulata, Fukaurahydra anthoformis and Corymorpha intermedia, based on a preponderance of molecular and morphological data that justify the designation of these species to different genera. Copyright © 2012 Elsevier Inc. All rights reserved.

  14. Innexin gap junctions in nerve cells coordinate spontaneous contractile behavior in Hydra polyps

    Science.gov (United States)

    Takaku, Yasuharu; Hwang, Jung Shan; Wolf, Alexander; Böttger, Angelika; Shimizu, Hiroshi; David, Charles N.; Gojobori, Takashi

    2014-01-01

    Nerve cells and spontaneous coordinated behavior first appeared near the base of animal evolution in the common ancestor of cnidarians and bilaterians. Experiments on the cnidarian Hydra have demonstrated that nerve cells are essential for this behavior, although nerve cells in Hydra are organized in a diffuse network and do not form ganglia. Here we show that the gap junction protein innexin-2 is expressed in a small group of nerve cells in the lower body column of Hydra and that an anti-innexin-2 antibody binds to gap junctions in the same region. Treatment of live animals with innexin-2 antibody eliminates gap junction staining and reduces spontaneous body column contractions. We conclude that a small subset of nerve cells, connected by gap junctions and capable of synchronous firing, act as a pacemaker to coordinate the contraction of the body column in the absence of ganglia.

  15. Innexin gap junctions in nerve cells coordinate spontaneous contractile behavior in Hydra polyps

    KAUST Repository

    Takaku, Yasuharu

    2014-01-07

    Nerve cells and spontaneous coordinated behavior first appeared near the base of animal evolution in the common ancestor of cnidarians and bilaterians. Experiments on the cnidarian Hydra have demonstrated that nerve cells are essential for this behavior, although nerve cells in Hydra are organized in a diffuse network and do not form ganglia. Here we show that the gap junction protein innexin-2 is expressed in a small group of nerve cells in the lower body column of Hydra and that an anti-innexin-2 antibody binds to gap junctions in the same region. Treatment of live animals with innexin-2 antibody eliminates gap junction staining and reduces spontaneous body column contractions. We conclude that a small subset of nerve cells, connected by gap junctions and capable of synchronous firing, act as a pacemaker to coordinate the contraction of the body column in the absence of ganglia.

  16. The toxicity of copper, cadmium and zinc to four different Hydra (Cnidaria: Hydrozoa).

    Science.gov (United States)

    Karntanut, Wanchamai; Pascoe, David

    2002-06-01

    An acute toxicity study of three metals to Hydra species carried out using two different assessment methods, (i) determination of the LC50 and (ii) measurement of progressive morphological changes, demonstrated that relative toxicity decreased from copper to cadmium with zinc the least toxic for all species. The latter method revealed more details of the effect on Hydra in terms of physical damage to the polyp but both methods indicated that H. viridissima was more sensitive to copper and cadmium than H. vulgaris1 (Zurich strain, male clone), H. vulgaris2 (a dioecious strain reproducing sexually and asexually) and H. oligactis (dioecious, reproducing sexually and asexually). The responses to zinc were similar for all Hydra. The possible role of metabolic interactions between H. viridissima and its symbiotic green algae in contributing to the greater sensitivity of this polyp is discussed.

  17. Nerve ring of the hypostome in hydra. I. Its structure, development, and maintenance

    DEFF Research Database (Denmark)

    Koizumi, O; Itazawa, M; Mizumoto, H

    1992-01-01

    neuronal complex consisting of a thick nerve bundle running circumferentially at the border between the hypostome and tentacle zone. Immunostaining showed that the nerve ring was heterogeneous and contained at least four different subsets of neurons. During head regeneration and budding, the nerve ring......The anatomy and developmental dynamics of the nerve ring in the hypostome of Hydra oligactis were examined immunocytochemically with an antiserum against a neuropeptide and with neuron-specific monoclonal antibodies. The nerve ring is unique in the mesh-like nerve net of hydra. It is a distinct...... appeared only after the nerve net of ganglion and sensory cells had formed. Every epithelial cell is continuously displaced with neurons toward either head or foot in an adult hydra. However, the ectoderm in the immediate vicinity of, and including, the nerve ring constitutes a stationary zone...

  18. Slow-cycling stem cells in hydra contribute to head regeneration

    Directory of Open Access Journals (Sweden)

    Niraimathi Govindasamy

    2014-11-01

    Full Text Available Adult stem cells face the challenge of maintaining tissue homeostasis by self-renewal while maintaining their proliferation potential over the lifetime of an organism. Continuous proliferation can cause genotoxic/metabolic stress that can compromise the genomic integrity of stem cells. To prevent stem cell exhaustion, highly proliferative adult tissues maintain a pool of quiescent stem cells that divide only in response to injury and thus remain protected from genotoxic stress. Hydra is a remarkable organism with highly proliferative stem cells and ability to regenerate at whole animal level. Intriguingly, hydra does not display consequences of high proliferation, such as senescence or tumour formation. In this study, we investigate if hydra harbours a pool of slow-cycling stem cells that could help prevent undesirable consequences of continuous proliferation. Hydra were pulsed with the thymidine analogue 5-ethynyl-2′-deoxyuridine (EdU and then chased in the absence of EdU to monitor the presence of EdU-retaining cells. A significant number of undifferentiated cells of all three lineages in hydra retained EdU for about 8–10 cell cycles, indicating that these cells did not enter cell cycle. These label-retaining cells were resistant to hydroxyurea treatment and were predominantly in the G2 phase of cell cycle. Most significantly, similar to mammalian quiescent stem cells, these cells rapidly entered cell division during head regeneration. This study shows for the first time that, contrary to current beliefs, cells in hydra display heterogeneity in their cell cycle potential and the slow-cycling cells in this population enter cell cycle during head regeneration. These results suggest an early evolution of slow-cycling stem cells in multicellular animals.

  19. Inotropic response elicited by nematocyst contents of Hydra oligactis (Coelenterata: Hydrozoa).

    Science.gov (United States)

    Lesh-Laurie, G E; DiBlasi, S L; Suchy, P E; Senturia, J B

    1989-01-01

    1. Intact, isolated nematocysts from the non-toxic, freshwater coelenterate Hydra oligactis contain soluble material(s) capable of producing a sustained increase in the rate of developed force in the vertebrate myocardium. 2. The positive inotropic effects of this material(s) appear grossly comparable to those described for Anthopleurin-A (AP-A) and Toxin II (ATX-II) from sea anemones. 3. The effects of the nematocyst material are distinct from those of known vasoactive peptides reported to occur in Hydra.

  20. Evolution of hydra, a recently evolved testis-expressed gene with nine alternative first exons in Drosophila melanogaster.

    Directory of Open Access Journals (Sweden)

    Shou-Tao Chen

    2007-07-01

    Full Text Available We describe here the Drosophila gene hydra that appears to have originated de novo in the melanogaster subgroup and subsequently evolved in both structure and expression level in Drosophila melanogaster and its sibling species. D. melanogaster hydra encodes a predicted protein of approximately 300 amino acids with no apparent similarity to any previously known proteins. The syntenic region flanking hydra on both sides is found in both D. ananassae and D. pseudoobscura, but hydra is found only in melanogaster subgroup species, suggesting that it originated less than approximately 13 million y ago. Exon 1 of hydra has undergone recurrent duplications, leading to the formation of nine tandem alternative exon 1s in D. melanogaster. Seven of these alternative exons are flanked on their 3' side by the transposon DINE-1 (Drosophila interspersed element-1. We demonstrate that at least four of the nine duplicated exon 1s can function as alternative transcription start sites. The entire hydra locus has also duplicated in D. simulans and D. sechellia. D. melanogaster hydra is expressed most intensely in the proximal testis, suggesting a role in late-stage spermatogenesis. The coding region of hydra has a relatively high Ka/Ks ratio between species, but the ratio is less than 1 in all comparisons, suggesting that hydra is subject to functional constraint. Analysis of sequence polymorphism and divergence of hydra shows that it has evolved under positive selection in the lineage leading to D. melanogaster. The dramatic structural changes surrounding the first exons do not affect the tissue specificity of gene expression: hydra is expressed predominantly in the testes in D. melanogaster, D. simulans, and D. yakuba. However, we have found that expression level changed dramatically (approximately >20-fold between D. melanogaster and D. simulans. While hydra initially evolved in the absence of nearby transposable element insertions, we suggest that the subsequent

  1. Revisiting TW Hydrae in light of new astrometric data

    Science.gov (United States)

    Teixeira, R.; Ducourant, C.; Galli, P. A. B.; Le Campion, J. F.; Zuckerman, B.; Krone-Martins, A. G. O.; Chauvin, G.; Song, I.

    2014-10-01

    Our efforts in the present work focused mainly on refining and improving the previous description and understanding of the stellar association TW Hydrae (TWA) including a very detailed membership analysis and its dynamical and evolutionary age.To achieve our objectives in a fully reliable way we take advantage of our own astrometric measurements (Ducourant et al. 2013) performed with NTT/EFOSC2 - ESO (La Silla - Chile) spread over three years (2007 - 2010) and of those published in the literature.A very detailed membership analysis based on the convergent point strategy as developed by our team (Galli et al. 2012, 2013) allowed us to define a consistent kinematic group containing 31 stars among the 44 proposed as TWA member in the literature. Assuming that our sample of stars may be contaminated by non-members and to get rid of the particular influence of each star we applied a Jacknife resampling technique generating 2000 random lists of 13 stars taken from our 16 stars and calculated for each the epoch of convergence when the radius is minimum. The mean of the epochs obtained and the dispersion about the mean give a dynamical age of 7.5± 0.7 Myr for the association that is in good agreement with the previous traceback age (De La Reza et al. 2006). We also estimated age for TWA moving group members from pre-main sequence evolutionary models (Siess et al. 2000) and find a mean age of 7.4± 1.2 Myr. These results show that the dynamical age of the association obtained via the traceback technique and the average age derived from theoretical evolutionary models are in good agreement.

  2. Two-Step Evolution of Endosymbiosis between Hydra and Algae

    KAUST Repository

    Ishikawa, Masakazu

    2016-07-09

    In the Hydra vulgaris group, only 2 of the 25 strains in the collection of the National Institute of Genetics in Japan currently show endosymbiosis with green algae. However, whether the other non-symbiotic strains also have the potential to harbor algae remains unknown. The endosymbiotic potential of non-symbiotic strains that can harbor algae may have been acquired before or during divergence of the strains. With the aim of understanding the evolutionary process of endosymbiosis in the H. vulgaris group, we examined the endosymbiotic potential of non-symbiotic strains of the H. vulgaris group by artificially introducing endosymbiotic algae. We found that 12 of the 23 non-symbiotic strains were able to harbor the algae until reaching the grand-offspring through the asexual reproduction by budding. Moreover, a phylogenetic analysis of mitochondrial genome sequences showed that all the strains with endosymbiotic potential grouped into a single cluster (cluster γ). This cluster contained two strains (J7 and J10) that currently harbor algae; however, these strains were not the closest relatives. These results suggest that evolution of endosymbiosis occurred in two steps; first, endosymbiotic potential was gained once in the ancestor of the cluster γ lineage; second, strains J7 and J10 obtained algae independently after the divergence of the strains. By demonstrating the evolution of the endosymbiotic potential in non-symbiotic H. vulgaris group strains, we have clearly distinguished two evolutionary steps. The step-by-step evolutionary process provides significant insight into the evolution of endosymbiosis in cnidarians.

  3. Glutamatergic transmission in hydra: NMDA/D-serine affects the electrical activity of the body and tentacles of Hydra vulgaris (Cnidaria, Hydrozoa).

    Science.gov (United States)

    Kay, J C; Kass-Simon, G

    2009-04-01

    Previous electrophysiological studies on the early-evolved metazoan Hydra vulgaris provided evidence that glutamate, acting through alpha-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) and kainate receptors, affects hydra's pacemaker systems; immunocytochemical studies showed that N-methyl-d-aspartate (NMDA) receptors were present in hydra tentacles; behavioral studies demonstrated that NMDA/d-serine affected mouth opening induced by reduced glutathione, and with AMPA/kainate, discharge of nematocysts. In this study, extracellular recordings were made from the tentacle and peduncle of hydra during bath application of NMDA and d-serine (both at 1 x 10(-5) mol l(-1) to 1 x 10(-9) mol l(-1)) in the presence of 1 x 10(-7) mol l(-1) AMPA or kainate. NMDA/d-serine produced a significant increase in tentacle activity, increasing the rate of tentacle pacemaker pulses (TPs) at 1 x 10(-7) mol l(-1), and small, behaviorally uncorrelated tentacle pulses (SUTPs) at 1 x 10(-5) mol l(-1). The NMDA antagonist, d-2-amino-5-phosphonopentanoic acid (D-AP5), counteracted the effects. NMDA/d-serine (1 x 10(-7) mol l(-1)) also caused a potentially significant (trend) decrease in the rate of small, behaviorally uncorrelated electrical body pulses (SUBPs) and rhythmic potentials (RPs). The effect was counteracted by D-AP5. The ectodermal contraction burst (CB) pacemaker system was unaffected by NMDA/d-serine. Our results indicate that glutamate, acting on NMDA/AMPA-kainate receptors, may cause opposing effects on the coordinating systems of tentacle and body-exciting the tentacle effectors and potentially causing an inhibition in the body column.

  4. Oxytocin/vasopressin-like immunoreactivity is present in the nervous system of hydra

    DEFF Research Database (Denmark)

    Grimmelikhuijzen, C J; Dierickx, K; Boer, G J

    1982-01-01

    Nerve cells have been found in hydra, which react with antisera to oxytocin, vasopressin and mesotocin. These nerve cells have a high density in the ectoderm of basal disk and tentacles and lower density in the ectoderm of peduncle, gastric region and hypostome. A very small number of nerve cells...

  5. Structure, expression, and developmental function of early divergent forms of metalloproteinases in Hydra

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Metalloproteinases have a critical role in a broad spectrum of cellular processes ranging from the break-down of extracellulax matrix to the processing of signal transduction-related proteins. These hydrolyticfunctions underlie a variety of mechanisms related to developmental processes as well as disease states.Structural analysis of metalloproteinases from both invertebrate and vertebrate species indicates that theseenzymes are highly conserved and arose early during metazoan evolution. In this regard, studies from vari-ous laboratories have reported that a number of classes of metalloproteinases are found in hydra, a memberof Cnidaria, the second oldest of existing animal phyla. These studies demonstrate that the hydra genomecontains at least three classes of metalloproteinases to include members of the 1) astacin class, 2) matrix met-alloproteinase class, and 3) neprilysin class. Functional studies indicate that these metalloproteinases playdiverse and important roles in hydra morphogenesis and cell differentiation as well as specialized functionsin adult polyps. This article will review the structure, expression, and function of these metalloproteinasesin hydra.

  6. The synaptonemal complex of basal metazoan hydra: more similarities to vertebrate than invertebrate meiosis model organisms.

    Science.gov (United States)

    Fraune, Johanna; Wiesner, Miriam; Benavente, Ricardo

    2014-03-20

    The synaptonemal complex (SC) is an evolutionarily well-conserved structure that mediates chromosome synapsis during prophase of the first meiotic division. Although its structure is conserved, the characterized protein components in the current metazoan meiosis model systems (Drosophila melanogaster, Caenorhabditis elegans, and Mus musculus) show no sequence homology, challenging the question of a single evolutionary origin of the SC. However, our recent studies revealed the monophyletic origin of the mammalian SC protein components. Many of them being ancient in Metazoa and already present in the cnidarian Hydra. Remarkably, a comparison between different model systems disclosed a great similarity between the SC components of Hydra and mammals while the proteins of the ecdysozoan systems (D. melanogaster and C. elegans) differ significantly. In this review, we introduce the basal-branching metazoan species Hydra as a potential novel invertebrate model system for meiosis research and particularly for the investigation of SC evolution, function and assembly. Also, available methods for SC research in Hydra are summarized.

  7. A comparison of metal accumulation by the cnidarian Hydra vulgaris directly from water or

    Directory of Open Access Journals (Sweden)

    Wanchamai Karntanut

    2007-05-01

    Full Text Available The cnidarian Hydra has been widely used to assess the acute toxicity of freshwater pollutants, but very little is known about pollutant accumulation by this animal. The purpose of this study was to measurethe accumulation of the three metals, i.e., copper, cadmium and zinc directly from water and also via its prey and to relate the recorded tissue concentrations to any change in biological activities. It was found thatcopper, cadmium and zinc all were accumulated in the tissues of Hydra exposed directly to the metals in water and also those exposed indirectly through feeding on contaminated prey. The bioconcentration factor(BCF recorded at 48 hours following direct uptake from water was greatest for copper (773, followed by cadmium (409 and zinc (125, although the greatest increase in body burden occurred with cadmium, Metal body burdens of Hydra fed on contaminated prey (Artemia increased in the same metal sequence as fordirect uptake from water and the increase was highest (250 times that of control Hydra for cadmium; however, biomagnification factors (BMFs were all < 1.0 indicating that there was little potential for increasingaccumulation via the food chain. There was significant inhibition of regeneration and bud production in polyps which had fed on cadmium-containing Artemia but not on copper or zinc- containing Artemia.

  8. Hydramacin-1, structure and antibacterial activity of a protein from the basal metazoan hydra

    NARCIS (Netherlands)

    Jung, S.; Dingley, A.J.; Augustin, R.; Anton-Erxleben, F.; Stanisak, M.; Gelhaus, C.; Gutsmann, T.; Hammer, M.U.; Podschun, R.; Bonvin, A.M.J.J.; Leippe, M.; Bosch, T.C.G.; Grötzinger, J.

    2009-01-01

    Hydramacin-1 is a novel antimicrobial protein recently discovered during investigations of the epithelial defense of the ancient metazoan Hydra. The amino acid sequence of hydramacin- 1 shows no sequence homology to any known antimicrobial proteins. Determination of the solution structure revealed t

  9. FoxO and stress responses in the cnidarian Hydra vulgaris.

    Directory of Open Access Journals (Sweden)

    Diane Bridge

    Full Text Available BACKGROUND: In the face of changing environmental conditions, the mechanisms underlying stress responses in diverse organisms are of increasing interest. In vertebrates, Drosophila, and Caenorhabditis elegans, FoxO transcription factors mediate cellular responses to stress, including oxidative stress and dietary restriction. Although FoxO genes have been identified in early-arising animal lineages including sponges and cnidarians, little is known about their roles in these organisms. METHODS/PRINCIPAL FINDINGS: We have examined the regulation of FoxO activity in members of the well-studied cnidarian genus Hydra. We find that Hydra FoxO is expressed at high levels in cells of the interstitial lineage, a cell lineage that includes multipotent stem cells that give rise to neurons, stinging cells, secretory cells and gametes. Using transgenic Hydra that express a FoxO-GFP fusion protein in cells of the interstitial lineage, we have determined that heat shock causes localization of the fusion protein to the nucleus. Our results also provide evidence that, as in bilaterian animals, Hydra FoxO activity is regulated by both Akt and JNK kinases. CONCLUSIONS: These findings imply that basic mechanisms of FoxO regulation arose before the evolution of bilaterians and raise the possibility that FoxO is involved in stress responses of other cnidarian species, including corals.

  10. Direct evidence for outflow of metal-enriched gas along the radio jets of Hydra A

    NARCIS (Netherlands)

    Kirkpatrick, C.C.; Gitti, M.; Cavagnolo, K.W.; McNamara, B.R.; David, L.P.; Nulsen, P.E.J.; Wise, M.W.

    2009-01-01

    Using deep Chandra observations of the Hydra A galaxy cluster, we examine the metallicity structure near the central galaxy and along its powerful radio source. We show that the metallicity of the intracluster medium is enhanced by up to 0.2 dex along the radio jets and lobes compared to the

  11. Profiling of adhesive-related genes in the freshwater cnidarian Hydra magnipapillata by transcriptomics and proteomics

    NARCIS (Netherlands)

    Rodrigues, Marcelo; Ostermann, Thomas; Kremeser, Leopold; Lindner, Herbert; Beisel, Christian; Berezikov, Eugene; Hobmayer, Bert; Ladurner, Peter

    2016-01-01

    The differentiated ectodermal basal disc cells of the freshwater cnidarian Hydra secrete proteinaceous glue to temporarily attach themselves to underwater surfaces. Using transcriptome sequencing and a basal disc-specific RNA-seq combined with in situ hybridisation a highly specific set of candidate

  12. Isolation and cultivation of endosymbiotic algae from green hydra and phylogenetic analysis of 18S rDNA sequences.

    Science.gov (United States)

    Kovacević, Goran; Franjević, Damjan; Jelencić, Biserka; Kalafatić, Mirjana

    2010-01-01

    Symbiotic associations are of wide significance in evolution and biodiversity. The green hydra is a typical example of endosymbiosis. In its gastrodermal myoepithelial cells it harbors the individuals of a unicellular green algae. Endosymbiotic algae from green hydra have been successfully isolated and permanently maintained in a stable clean lab culture for the first time. We reconstructed the phylogeny of isolated endosymbiotic algae using the 18S rRNA gene to clarify its current status and to validate the traditional inclusion of these endosymbiotic algae within the Chlorella genus. Molecular analyses established that different genera and species of unicellular green algae could be present as symbionts in green hydra, depending on the natural habitat of a particular strain of green hydra.

  13. Spectroscopic Confirmation of the Dwarf Galaxies Hydra II and Pisces II and the Globular Cluster Laevens 1

    CERN Document Server

    Kirby, Evan N; Cohen, Judith G

    2015-01-01

    We present Keck/DEIMOS spectroscopy of stars in the recently discovered Milky Way satellites Hydra II, Pisces II, and Laevens 1. We measured a velocity dispersion of 5.4 (+3.6 -2.4) km/s for Pisces II, but we did not resolve the velocity dispersions of Hydra II or Laevens 1. We marginally resolved the metallicity dispersions of Hydra II and Pisces II but not Laevens 1. Furthermore, Hydra II and Pisces II obey the luminosity-metallicity relation for Milky Way dwarf galaxies ( = -2.02 +/- 0.08 and -2.45 +/- 0.07, respectively), whereas Laevens 1 does not ( = -1.68 +/- 0.05). The kinematic and chemical properties suggest that Hydra II and Pisces II are dwarf galaxies, and Laevens 1 is a globular cluster. We determined that two of the previously observed blue stars near the center of Laevens 1 are not members of the cluster. A third blue star has ambiguous membership. If it is a member, we suggest that it could be a Type II Cepheid variable. Hydra II has a radial velocity = 303.1 +/- 1.4 km/s, similar to the lea...

  14. Structural and Sequence Similarities of Hydra Xeroderma Pigmentosum A Protein to Human Homolog Suggest Early Evolution and Conservation

    Directory of Open Access Journals (Sweden)

    Apurva Barve

    2013-01-01

    Full Text Available Xeroderma pigmentosum group A (XPA is a protein that binds to damaged DNA, verifies presence of a lesion, and recruits other proteins of the nucleotide excision repair (NER pathway to the site. Though its homologs from yeast, Drosophila, humans, and so forth are well studied, XPA has not so far been reported from protozoa and lower animal phyla. Hydra is a fresh-water cnidarian with a remarkable capacity for regeneration and apparent lack of organismal ageing. Cnidarians are among the first metazoa with a defined body axis, tissue grade organisation, and nervous system. We report here for the first time presence of XPA gene in hydra. Putative protein sequence of hydra XPA contains nuclear localization signal and bears the zinc-finger motif. It contains two conserved Pfam domains and various characterized features of XPA proteins like regions for binding to excision repair cross-complementing protein-1 (ERCC1 and replication protein A 70 kDa subunit (RPA70 proteins. Hydra XPA shows a high degree of similarity with vertebrate homologs and clusters with deuterostomes in phylogenetic analysis. Homology modelling corroborates the very close similarity between hydra and human XPA. The protein thus most likely functions in hydra in the same manner as in other animals, indicating that it arose early in evolution and has been conserved across animal phyla.

  15. THM-GTRF: New Spider meshes, New Hydra-TH runs

    Energy Technology Data Exchange (ETDEWEB)

    Bakosi, Jozsef [Los Alamos National Laboratory; Christon, Mark A. [Los Alamos National Laboratory; Francois, Marianne M. [Los Alamos National Laboratory; Lowrie, Robert B. [Los Alamos National Laboratory; Nourgaliev, Robert [Los Alamos National Laboratory

    2012-06-20

    Progress is reported on computational capabilities for the grid-to-rod-fretting (GTRF) problem of pressurized water reactors. Numeca's Hexpress/Hybrid mesh generator is demonstrated as an excellent alternative to generating computational meshes for complex flow geometries, such as in GTRF. Mesh assessment is carried out using standard industrial computational fluid dynamics practices. Hydra-TH, a simulation code developed at LANL for reactor thermal-hydraulics, is demonstrated on hybrid meshes, containing different element types. A series of new Hydra-TH calculations has been carried out collecting turbulence statistics. Preliminary results on the newly generated meshes are discussed; full analysis will be documented in the L3 milestone, THM.CFD.P5.05, Sept. 2012.

  16. Searching for star-forming galaxies in the Fornax and Hydra clusters

    Science.gov (United States)

    Vaduvescu, O.; Kehrig, C.; Vilchez, J. M.; Unda-Sanzana, E.

    2011-09-01

    Context. The formation and evolution of dwarf galaxies is relatively difficult to understand because of their faint emission in all regimes that require large aperture telescopes. Aims: We intend to study the evolution of star-forming dwarf galaxies in clusters. We selected Fornax and Hydra clusters to complement our previous study of Virgo. On the basis of available literature data, we selected ten star-forming candidates in Fornax and another ten objects in Hydra. Methods: We used Gemini South with GMOS to acquire Hα images necessary to detect star-forming regions in the two galaxy samples. We then performed long-slit spectroscopy for the brightest six candidates, to derive their chemical properties. Finally, we employed the VLT with HAWK-I to observe all galaxies in the K' band to derive their main physical properties. Results: We studied the morphology of our two samples, finding five objects in Fornax and six in Hydra with structures consistent with those of star-forming dwarfs, i.e., dwarf irregulars (dIs) or blue compact dwarfs (BCDs). About four other objects are probably dwarf spirals, while three objects remained undetected in both visible and near infrared. On the basis of visible bright emission lines, we derived oxygen abundances for ten star-forming candidates with values between 8.00 ≤ 12+log(O/H) ≤8.78. Conclusions: Most fundamental properties of star-forming galaxies in Fornax and Hydra appear similar to corresponding properties of dIs and BCDs from Virgo and the local volume (LV). The luminosity-metallicity and metallicity-gas fraction relations in the LV and Virgo appear to be followed by Fornax and Hydra samples, suggesting that the chemical evolution of the two clusters seems consistent with the predictions from the closed box model, although larger samples are needed to investigate the role of possible environmental effects. Star-forming dwarfs (dIs and BCDs) in different environments appear to follow different mass-metallicity relations

  17. Variable Stars in the Field of the Hydra II Ultra-faint Dwarf Galaxy

    Science.gov (United States)

    Vivas, A. Katherina; Olsen, Knut; Blum, Robert; Nidever, David L.; Walker, Alistair R.; Martin, Nicolas F.; Besla, Gurtina; Gallart, Carme; van der Marel, Roeland P.; Majewski, Steven R.; Kaleida, Catherine C.; Muñoz, Ricardo R.; Saha, Abhijit; Conn, Blair C.; Jin, Shoko

    2016-05-01

    We report the discovery of one RR Lyrae star in the ultra-faint satellite galaxy Hydra II based on time series photometry in the g, r and i bands obtained with the Dark Energy Camera at Cerro Tololo Inter-American Observatory, Chile. The association of the RR Lyrae star discovered here with Hydra II is clear because is located at 42\\prime\\prime from the center of the dwarf, well within its half-light radius of 102\\prime\\prime . The RR Lyrae star has a mean magnitude of i=21.30+/- 0.04 which is too faint to be a field halo star. This magnitude translates to a heliocentric distance of 151 ± 8 kpc for Hydra II; this value is ∼ 13% larger than the estimate from the discovery paper based on the average magnitude of several blue horizontal branch star candidates. The new distance implies a slightly larger half-light radius of {76}-10+12 pc and a brighter absolute magnitude of {M}V=-5.1+/- 0.3, which keeps this object within the realm of the dwarf galaxies. A comparison with other RR Lyrae stars in ultra-faint systems indicates similar pulsational properties among them, which are different to those found among halo field stars and those in the largest of the Milky Way satellites. We also report the discovery of 31 additional short period variables in the field of view (RR Lyrae, SX Phe, eclipsing binaries, and a likely anomalous cepheid) which are likely not related with Hydra II.

  18. Toxicity of Polychlorinated Diphenyl Ethers in Hydra Attenuata and in Rat Whole Embryo Culture

    Science.gov (United States)

    1991-05-01

    were fed freshly hatched Artemia naupii ( brine shrimp ) once a day. The shrimp eggs (approximately 15 ml) were hydrated in 1% NaCl for approximately 2...all other chemicals were from Sigma (St. Louis, MO.). Brine shrimp eggs were purchased from Carolina Biological Supply, Burlington, NC. The original...days at room temperature. Eggs were aerated throughout the hatching period. Prior to feeding to the hydra, brine shrimp were siphoned into a fish net

  19. Notch-signalling is required for head regeneration and tentacle patterning in Hydra.

    Science.gov (United States)

    Münder, Sandra; Tischer, Susanne; Grundhuber, Maresa; Büchels, Nathalie; Bruckmeier, Nadine; Eckert, Stefanie; Seefeldt, Carolin A; Prexl, Andrea; Käsbauer, Tina; Böttger, Angelika

    2013-11-01

    Local self-activation and long ranging inhibition provide a mechanism for setting up organising regions as signalling centres for the development of structures in the surrounding tissue. The adult hydra hypostome functions as head organiser. After hydra head removal it is newly formed and complete heads can be regenerated. The molecular components of this organising region involve Wnt-signalling and β-catenin. However, it is not known how correct patterning of hypostome and tentacles are achieved in the hydra head and whether other signals in addition to HyWnt3 are needed for re-establishing the new organiser after head removal. Here we show that Notch-signalling is required for re-establishing the organiser during regeneration and that this is due to its role in restricting tentacle activation. Blocking Notch-signalling leads to the formation of irregular head structures characterised by excess tentacle tissue and aberrant expression of genes that mark the tentacle boundaries. This indicates a role for Notch-signalling in defining the tentacle pattern in the hydra head. Moreover, lateral inhibition by HvNotch and its target HyHes are required for head regeneration and without this the formation of the β-catenin/Wnt dependent head organiser is impaired. Work on prebilaterian model organisms has shown that the Wnt-pathway is important for setting up signalling centres for axial patterning in early multicellular animals. Our data suggest that the integration of Wnt-signalling with Notch-Delta activity was also involved in the evolution of defined body plans in animals.

  20. Advances in HYDRA and its application to simulations of Inertial Confinement Fusion targets

    Science.gov (United States)

    Marinak, M. M.; Kerbel, G. D.; Koning, J. M.; Patel, M. V.; Sepke, S. M.; Brown, P. N.; Chang, B.; Procassini, R.; Veitzer, S. A.

    2008-11-01

    We will outline new capabilities added to the HYDRA 2D/3D multiphysics ICF simulation code. These include a new SN multigroup radiation transport package (1D), constitutive models for elastic-plastic (strength) effects, and a mix model. A Monte Carlo burn package is being incorporated to model diagnostic signatures of neutrons, gamma rays and charged particles. A 3D MHD package that treats resistive MHD is available. Improvements to HYDRA's implicit Monte Carlo photonics package, including the addition of angular biasing, now enable integrated hohlraum simulations to complete in substantially shorter time. The heavy ion beam deposition package now includes a new model for ion stopping power developed by the Tech-X Corporation, with improved accuracy below the Bragg peak. Examples will illustrate HYDRA's enhanced capabilities to simulate various aspects of inertial confinement fusion targets.This work was performed under the auspices of the Lawrence Livermore National Security, LLC, (LLNS) under Contract No. DE-AC52-07NA27344. The work of Tech-X personnel was funded by the Department of Energy under Small Business Innovation Research Contract No. DE-FG02-03ER83797.

  1. Peptide-gated ion channels and the simple nervous system of Hydra.

    Science.gov (United States)

    Gründer, Stefan; Assmann, Marc

    2015-02-15

    Neurons either use electrical or chemical synapses to communicate with each other. Transmitters at chemical synapses are either small molecules or neuropeptides. After binding to their receptors, transmitters elicit postsynaptic potentials, which can either be fast and transient or slow and longer lasting, depending on the type of receptor. Fast transient potentials are mediated by ionotropic receptors and slow long-lasting potentials by metabotropic receptors. Transmitters and receptors are well studied for animals with a complex nervous system such as vertebrates and insects, but much less is known for animals with a simple nervous system like Cnidaria. As cnidarians arose early in animal evolution, nervous systems might have first evolved within this group and the study of neurotransmission in cnidarians might reveal an ancient mechanism of neuronal communication. The simple nervous system of the cnidarian Hydra extensively uses neuropeptides and, recently, we cloned and functionally characterized an ion channel that is directly activated by neuropeptides of the Hydra nervous system. These results demonstrate the existence of peptide-gated ion channels in Hydra, suggesting they mediate fast transmission in its nervous system. As related channels are also present in the genomes of the cnidarian Nematostella, of placozoans and of ctenophores, it should be considered that the early nervous systems of cnidarians and ctenophores have co-opted neuropeptides for fast transmission at chemical synapses.

  2. Variable stars in the field of the Hydra II ultra-faint dwarf galaxy

    CERN Document Server

    Vivas, A Katherina; Olsen, Knut; Blum, Robert; Walker, Alistair; Martin, Nicolas; Besla, Gurtina; Gallart, Carme; van der Marel, Roeland; Majewski, Steven; Kaleida, Catherine; Muñoz, Ricardo; Conn, Blair; Jin, Shoko

    2015-01-01

    We report the discovery of one RR Lyrae star in the ultra--faint satellite galaxy Hydra II based on time series photometry in the g, r and i bands obtained with the Dark Energy Camera at Cerro Tololo Interamerican Observatory, Chile. The RR Lyrae star has a mean magnitude of $i = 21.30\\pm 0.04$ which translates to a heliocentric distance of $151\\pm 8$ kpc for Hydra II; this value is $\\sim 13\\%$ larger than the estimate from the discovery paper based on the average magnitude of several blue horizontal branch star candidates. The new distance implies a slightly larger half-light radius of $76^{+12}_{-10}$ pc and a brighter absolute magnitude of $M_V = -5.1 \\pm 0.3$, which keeps this object within the realm of the dwarf galaxies. The pulsational properties of the RR Lyrae star ($P=0.645$ d, $\\Delta g = 0.68$ mag) suggest Hydra II may be a member of the intermediate Oosterhoff or Oosterhoff II group. A comparison with other RR Lyrae stars in ultra--faint systems indicates similar pulsational properties among them...

  3. Impact of Carbon Nano-Onions on Hydra vulgaris as a Model Organism for Nanoecotoxicology

    Directory of Open Access Journals (Sweden)

    Valentina Marchesano

    2015-08-01

    Full Text Available The toxicological effects of pristine and chemically modified carbon nano-onions (CNOs on the development of the freshwater polyp Hydra vulgaris were investigated in order to elucidate the ecotoxicological effects of CNOs. Chemical modifications of the CNOs were accomplished by surface functionalization with benzoic acid, pyridine and pyridinium moieties. thermogravimetric analysis (TGA, Fourier transform infrared spectroscopy (FT-IR and Raman spectroscopy confirmed the covalent surface functionalization of CNOs. Hydra specimens were exposed to the carbon nanomaterials by prolonged incubation within their medium. Uptake was monitored by optical microscopy, and the toxicological effects of the CNOs on Hydra behavior, morphology, as well as the long-term effects on the development and reproductive capability were examined. The obtained data revealed the absence of adverse effects of CNOs (in the range 0.05–0.1 mg/L in vivo at the whole animal level. Together with previously performed in vitro toxicological analyses, our findings indicate the biosafety of CNOs and the feasibility of employing them as materials for biomedical applications.

  4. Toxic effects of bisphenol A on sexual and asexual reproduction in Hydra oligactis.

    Science.gov (United States)

    Fukuhori, N; Kitano, M; Kimura, H

    2005-05-01

    Hydra oligactis, an evolutionarily primitive invertebrate, produced eggs or testes (sexual reproduction) when starved at 10 degrees C, and produced buds (asexual reproduction) when fed at 20 degrees C. Bisphenol A (BPA) at 2-4 mg/L given to male or female hydra had adverse effects on both sexual and asexual reproduction. Despite the estrogenic nature of BPA, testis formation and egg formation were similarly affected. The doses causing these acute toxicities were comparable to those reported earlier in aquatic invertebrates and were much higher than environmentally detected doses, at which the disruption of the endocrine system has been reported in fishes. All these facts indicate that the adverse effects are the results of general toxicity and may not be due to the estrogenic function of the compound. On the other hand, we found that BPA at 1 mg/L (a dose still much higher than environmental doses) stimulated asexual reproduction. No such stimulation of sexual reproduction was seen. When male hydras were fed at 10 degrees C, they produced both buds and testes simultaneously. BPA at 0.5 and 1 mg/L under this condition also stimulated asexual reproduction, whereas it suppressed sexual reproduction more severely than BPA at 2-3 mg/L. There may be some interaction between processes involved in sexual and asexual reproduction under this condition, and the stimulation of asexual reproduction by BPA may cause suppression of sexual reproduction.

  5. Patterning processes in aggregates of Hydra cells visualized with the monoclonal antibody, TS19.

    Science.gov (United States)

    Sato, M; Bode, H R; Sawada, Y

    1990-10-01

    The monoclonal antibody, TS19, (Heimfeld et al., 1985), labels the apical surface of ectodermal epithelial cells of tentacles and lower peduncles in Hydra. To investigate the patterning process in a tissue whose original pattern was completely destroyed, the TS19 staining pattern was examined in developing aggregates of Hydra cells. Two types of aggregates were prepared. G-aggregates were made from tissue of the gastric portion of animals and RG-aggregates from gastric tissue allowed to regenerate for 24 hr before making aggregates. G-aggregates were initially TS19-negative, and later dim and uniformly TS19-positive. Thereafter, TS19 staining broke up into brightly stained and unstained regions. The brightly staining regions developed into head or foot structures. The TS19 pattern in RG-aggregates developed differently. Since the initial aggregates contained cells of regenerating tips, they started with TS19-positive cells as well as TS19-negative cells. The numbers of brightly staining TS19-positive cells increased with time. Some patches of these cells developed into head or foot structures, while others did not. These results and a simulation using a reaction-diffusion model suggest that the changes in activation levels affected the temporal changes in the pattern of TS19 staining, and that the de novo pattern formation in hydra can be explained in terms of a process involving activation and inhibition properties.

  6. Rapid divergence of histones in Hydrozoa (Cnidaria) and evolution of a novel histone involved in DNA damage response in hydra.

    Science.gov (United States)

    Reddy, Puli Chandramouli; Ubhe, Suyog; Sirwani, Neha; Lohokare, Rasika; Galande, Sanjeev

    2017-08-01

    Histones are fundamental components of chromatin in all eukaryotes. Hydra, an emerging model system belonging to the basal metazoan phylum Cnidaria, provides an ideal platform to understand the evolution of core histone components at the base of eumetazoan phyla. Hydra exhibits peculiar properties such as tremendous regenerative capacity, lack of organismal senescence and rarity of malignancy. In light of the role of histone modifications and histone variants in these processes it is important to understand the nature of histones themselves and their variants in hydra. Here, we report identification of the complete repertoire of histone-coding genes in the Hydra magnipapillata genome. Hydra histones were classified based on their copy numbers, gene structure and other characteristic features. Genomic organization of canonical histone genes revealed the presence of H2A-H2B and H3-H4 paired clusters in high frequency and also a cluster with all core histones along with H1. Phylogenetic analysis of identified members of H2A and H2B histones suggested rapid expansion of these groups in Hydrozoa resulting in the appearance of unique subtypes. Amino acid sequence level comparisons of H2A and H2B forms with bilaterian counterparts suggest the possibility of a highly mobile nature of nucleosomes in hydra. Absolute quantitation of transcripts confirmed the high copy number of histones and supported the canonical nature of H2A. Furthermore, functional characterization of H2A.X.1 and a unique variant H2A.X.2 in the gastric region suggest their role in the maintenance of genome integrity and differentiation processes. These findings provide insights into the evolution of histones and their variants in hydra. Copyright © 2017 Elsevier GmbH. All rights reserved.

  7. A new case of neuropeptide coexpression (RGamide and LWamides) in Hydra, found by whole-mount, two-color double-labeling in situ hybridization

    DEFF Research Database (Denmark)

    Hansen, Georg N; Williamson, Michael; Grimmelikhuijzen, Cornelis J P

    2002-01-01

    The freshwater polyp Hydra has a primitive nervous system that expresses at least six different neuropeptide genes: (1) three genes, coding for the preprohormones-A, -B, and -C that each gives rise to a variety of peptides with the C-terminal sequence Arg-Phe-NH(2) (the Hydra-RFamides); (2) one g...

  8. RNAseq versus genome-predicted transcriptomes: a large population of novel transcripts identified in an Illumina-454 Hydra transcriptome.

    Science.gov (United States)

    Wenger, Yvan; Galliot, Brigitte

    2013-03-25

    Evolutionary studies benefit from deep sequencing technologies that generate genomic and transcriptomic sequences from a variety of organisms. Genome sequencing and RNAseq have complementary strengths. In this study, we present the assembly of the most complete Hydra transcriptome to date along with a comparative analysis of the specific features of RNAseq and genome-predicted transcriptomes currently available in the freshwater hydrozoan Hydra vulgaris. To produce an accurate and extensive Hydra transcriptome, we combined Illumina and 454 Titanium reads, giving the primacy to Illumina over 454 reads to correct homopolymer errors. This strategy yielded an RNAseq transcriptome that contains 48'909 unique sequences including splice variants, representing approximately 24'450 distinct genes. Comparative analysis to the available genome-predicted transcriptomes identified 10'597 novel Hydra transcripts that encode 529 evolutionarily-conserved proteins. The annotation of 170 human orthologs points to critical functions in protein biosynthesis, FGF and TOR signaling, vesicle transport, immunity, cell cycle regulation, cell death, mitochondrial metabolism, transcription and chromatin regulation. However, a majority of these novel transcripts encodes short ORFs, at least 767 of them corresponding to pseudogenes. This RNAseq transcriptome also lacks 11'270 predicted transcripts that correspond either to silent genes or to genes expressed below the detection level of this study. We established a simple and powerful strategy to combine Illumina and 454 reads and we produced, with genome assistance, an extensive and accurate Hydra transcriptome. The comparative analysis of the RNAseq transcriptome with genome-predicted transcriptomes lead to the identification of large populations of novel as well as missing transcripts that might reflect Hydra-specific evolutionary events.

  9. “Is the Hydra the Enemy?” A Review of English Language as Hydra: Its Impacts on Non-English Language Cultures

    Directory of Open Access Journals (Sweden)

    Corazon D. Villareal

    2012-12-01

    Full Text Available The book, part of the series on Linguistic Diversity and Language Rights of Multilingual Matters, seeks "to promote multilingualism as a resource, the maintenance of the linguistic diversity and development of and respect for linguistic human rights worldwide through the dissemination of theoretical and empirical research"(ii. The context for this advocacy is English whose domain is perceived to have reduced linguistic and cultural diversity; this encounter is the core concern of the book, as the title suggests. The contributors unabashedly articulate their disgust and rage against this hydra through a seemingly inexhaustible arsenal of metaphors - thief, bully, juggernaut,an intractable governess, "a partner in crime," "an overstaying auntie," etc. The tone is combative, sometimes veering dangerously close to simplistic name-calling and clichéd emotionalism. So it seems.

  10. HYDRA-II: A hydrothermal analysis computer code: Volume 3, Verification/validation assessments

    Energy Technology Data Exchange (ETDEWEB)

    McCann, R.A.; Lowery, P.S.

    1987-10-01

    HYDRA-II is a hydrothermal computer code capable of three-dimensional analysis of coupled conduction, convection, and thermal radiation problems. This code is especially appropriate for simulating the steady-state performance of spent fuel storage systems. The code has been evaluated for this application for the US Department of Energy's Commercial Spent Fuel Management Program. HYDRA-II provides a finite difference solution in cartesian coordinates to the equations governing the conservation of mass, momentum, and energy. A cylindrical coordinate system may also be used to enclose the cartesian coordinate system. This exterior coordinate system is useful for modeling cylindrical cask bodies. The difference equations for conservation of momentum are enhanced by the incorporation of directional porosities and permeabilities that aid in modeling solid structures whose dimensions may be smaller than the computational mesh. The equation for conservation of energy permits modeling of orthotropic physical properties and film resistances. Several automated procedures are available to model radiation transfer within enclosures and from fuel rod to fuel rod. The documentation of HYDRA-II is presented in three separate volumes. Volume I - Equations and Numerics describes the basic differential equations, illustrates how the difference equations are formulated, and gives the solution procedures employed. Volume II - User's Manual contains code flow charts, discusses the code structure, provides detailed instructions for preparing an input file, and illustrates the operation of the code by means of a model problem. This volume, Volume III - Verification/Validation Assessments, provides a comparison between the analytical solution and the numerical simulation for problems with a known solution. This volume also documents comparisons between the results of simulations of single- and multiassembly storage systems and actual experimental data. 11 refs., 55 figs., 13 tabs.

  11. HYDRA-II: A hydrothermal analysis computer code: Volume 2, User's manual

    Energy Technology Data Exchange (ETDEWEB)

    McCann, R.A.; Lowery, P.S.; Lessor, D.L.

    1987-09-01

    HYDRA-II is a hydrothermal computer code capable of three-dimensional analysis of coupled conduction, convection, and thermal radiation problems. This code is especially appropriate for simulating the steady-state performance of spent fuel storage systems. The code has been evaluated for this application for the US Department of Energy's Commercial Spent Fuel Management Program. HYDRA-II provides a finite-difference solution in cartesian coordinates to the equations governing the conservation of mass, momentum, and energy. A cylindrical coordinate system may also be used to enclose the cartesian coordinate system. This exterior coordinate system is useful for modeling cylindrical cask bodies. The difference equations for conservation of momentum incorporate directional porosities and permeabilities that are available to model solid structures whose dimensions may be smaller than the computational mesh. The equation for conservation of energy permits modeling of orthotropic physical properties and film resistances. Several automated methods are available to model radiation transfer within enclosures and from fuel rod to fuel rod. The documentation of HYDRA-II is presented in three separate volumes. Volume 1 - Equations and Numerics describes the basic differential equations, illustrates how the difference equations are formulated, and gives the solution procedures employed. This volume, Volume 2 - User's Manual, contains code flow charts, discusses the code structure, provides detailed instructions for preparing an input file, and illustrates the operation of the code by means of a sample problem. The final volume, Volume 3 - Verification/Validation Assessments, provides a comparison between the analytical solution and the numerical simulation for problems with a known solution. 6 refs.

  12. Central mass profiles of the nearby cool-core galaxy clusters Hydra A and A478

    Science.gov (United States)

    Okabe, N.; Umetsu, K.; Tamura, T.; Fujita, Y.; Takizawa, M.; Matsushita, K.; Fukazawa, Y.; Futamase, T.; Kawaharada, M.; Miyazaki, S.; Mochizuki, Y.; Nakazawa, K.; Ohashi, T.; Ota, N.; Sasaki, T.; Sato, K.; Tam, S. I.

    2016-03-01

    We perform a weak-lensing study of the nearby cool-core galaxy clusters, Hydra A (z = 0.0538) and A478 (z = 0.0881), of which the brightest cluster galaxies (BCGs) host the powerful activities of active galactic nuclei (AGNs). For each cluster, the observed tangential shear profile is described well by either a single Navarro-Frenk-White model or a two-component model including the BCG as an unresolved point mass. For A478, we determine the BCG and its host-halo masses from a joint fit to weak-lensing and stellar photometry measurements. We find that the choice of initial mass functions (IMFs) can introduce a factor of 2 uncertainty in the BCG mass, whereas the BCG host-halo mass is constrained well by data. We perform a joint analysis of the weak-lensing and stellar kinematics data available for the Hydra A cluster, which allows us to constrain the central mass profile without assuming specific IMFs. We find that the central mass profile (r < 300 kpc) determined from the joint analysis is in excellent agreement with those from independent measurements, including dynamical masses estimated from the cold gas disc component, X-ray hydrostatic total mass estimates, and the central stellar mass estimated with the Salpeter IMF. The observed dark matter fraction around the BCG for Hydra A is found to be smaller than those predicted by adiabatic contraction models, suggesting the importance of other physical processes, such as AGN feedback and/or dissipationless mergers.

  13. Hydra: A web-based system for cardiovascular analysis, diagnosis and treatment.

    Science.gov (United States)

    Novo, J; Hermida, A; Ortega, M; Barreira, N; Penedo, M G; López, J E; Calvo, C

    2017-02-01

    Cardiovascular (CV) risk stratification is a highly complex process involving an extensive set of clinical trials to support the clinical decision-making process. There are many clinical conditions (e.g. diabetes, obesity, stress, etc.) that can lead to the early diagnosis or establishment of cardiovascular disease. In order to determine all these clinical conditions, a complete set of clinical patient analyses is typically performed, including a physical examination, blood analysis, electrocardiogram, blood pressure (BP) analysis, etc. This article presents a web-based system, called Hydra, which integrates a full and detailed set of services and functionalities for clinical decision support in order to help and improve the work of clinicians in cardiovascular patient diagnosis, risk assessment, treatment and monitoring over time. Hydra integrates a number of different services: a service for inputting all the information gathered by specialists (physical examination, habits, BP, blood analysis, electrocardiogram, etc.); a tool to automatically determine the CV risk stratification, including well-known standard risk stratification tables; and, finally, various tools to incorporate, analyze and graphically present the records of the ambulatory BP monitoring that provides BP analysis over a given period of time (24 or 48 hours). In addition, the platform presents a set of reports derived from all the information gathered from the patient in order to support physicians in their clinical decisions. Hydra was tested and validated in a real domain. In particular, internal medicine specialists at the Hypertension Unit of the Santiago de Compostela University Hospital (CHUS) validated the platform and used it in different clinical studies to demonstrate its utility. It was observed that the platform increased productivity and accuracy in the assessment of patient data yielding a cost reduction in clinical practice. This paper proposes a complete platform that includes

  14. Advances in HYDRA and its applications to simulations of inertial confinement fusion targets

    Directory of Open Access Journals (Sweden)

    Marinak M.M.

    2013-11-01

    Full Text Available A new set of capabilities has been implemented in the HYDRA 2D/3D multiphysics inertial confinement fusion simulation code. These include a Monte Carlo particle transport library. It models transport of neutrons, gamma rays and light ions, as well as products they generate from nuclear and coulomb collisions. It allows accurate simulations of nuclear diagnostic signatures from capsule implosions. We apply it to here in a 3D simulation of a National Ignition Facility (NIF ignition capsule which models the full capsule solid angle. This simulation contains a severely rough ablator perturbation and provides diagnostics signatures of capsule failure due to excessive instability growth.

  15. A Polar Discrete Ordinate Radiation Transport Method for 2D ALE Meshes in HYDRA

    Science.gov (United States)

    Chang, Britton; Marinak, Marty; Weber, Chris; Peterson, Luc

    2016-10-01

    The Polar Discrete Ordinate Radiation Transport Method in HYDRA has been extended to handle general 2D r-z meshes. Previously the method was only for orthogonal 2D meshes. The new method can be employed with the ALE methodology for managing mesh motion that is used to simulate Rayleigh-Taylor and Richtmyer-Meshkov instabilities on NIF capsule implosions. The results of an examination of this kind will be compared to those obtained by the corresponding diffusion method. This work was performed under the auspices of the Lawrence Livermore National Security, LLC, (LLNS) under Contract No. DE-AC52-07NA27344.

  16. A novel gene family controls species-specific morphological traits in Hydra.

    Directory of Open Access Journals (Sweden)

    Konstantin Khalturin

    2008-11-01

    Full Text Available Understanding the molecular events that underlie the evolution of morphological diversity is a major challenge in biology. Here, to identify genes whose expression correlates with species-specific morphologies, we compared transcriptomes of two closely related Hydra species. We find that species-specific differences in tentacle formation correlate with expression of a taxonomically restricted gene encoding a small secreted protein. We show that gain of function induces changes in morphology that mirror the phenotypic differences observed between species. These results suggest that "novel" genes may be involved in the generation of species-specific morphological traits.

  17. A fragmented metazoan organellar genome: the two mitochondrial chromosomes of Hydra magnipapillata

    Directory of Open Access Journals (Sweden)

    Wörheide Gert

    2008-07-01

    Full Text Available Abstract Background Animal mitochondrial (mt genomes are characteristically circular molecules of ~16–20 kb. Medusozoa (Cnidaria excluding Anthozoa are exceptional in that their mt genomes are linear and sometimes subdivided into two to presumably four different molecules. In the genus Hydra, the mt genome comprises one or two mt chromosomes. Here, we present the whole mt genome sequence from the hydrozoan Hydra magnipapillata, comprising the first sequence of a fragmented metazoan mt genome encoded on two linear mt chromosomes (mt1 and mt2. Results The H. magnipapillata mt chromosomes contain the typical metazoan set of 13 genes for respiratory proteins, the two rRNA genes and two tRNA genes. All genes are unidirectionally oriented on mt1 and mt2, and several genes overlap. The gene arrangement suggests that the two mt chromosomes originated from one linear molecule that separated between nd5 and rns. Strong correlations between the AT content of rRNA genes (rns and rnl and the AT content of protein-coding genes among 24 cnidarian genomes imply that base composition is mainly determined by mt genome-wide constraints. We show that identical inverted terminal repeats (ITR occur on both chromosomes; these ITR contain a partial copy or part of the 3' end of cox1 (54 bp. Additionally, both mt chromosomes possess identical oriented sequences (IOS at the 5' and 3' ends (5' and 3' IOS adjacent to the ITR. The 5' IOS contains trnM and non-coding sequences (119 bp, whereas the 3' IOS comprises a larger part (mt2 with a larger partial copy of cox1 (243 bp. Conclusion ITR are also documented in the two other available medusozoan mt genomes (Aurelia aurita and Hydra oligactis. In H. magnipapillata, the arrangement of ITR and 5' IOS and 3' IOS suggest that these regions are crucial for mt DNA replication and/or transcription initiation. An analogous organization occurs in a highly fragmented ichthyosporean mt genome. With our data, we can reject a model of

  18. The putative Notch ligand HyJagged is a transmembrane protein present in all cell types of adult Hydra and upregulated at the boundary between bud and parent

    Directory of Open Access Journals (Sweden)

    Tischer Susanne

    2011-09-01

    Full Text Available Abstract Background The Notch signalling pathway is conserved in pre-bilaterian animals. In the Cnidarian Hydra it is involved in interstitial stem cell differentiation and in boundary formation during budding. Experimental evidence suggests that in Hydra Notch is activated by presenilin through proteolytic cleavage at the S3 site as in all animals. However, the endogenous ligand for HvNotch has not been described yet. Results We have cloned a cDNA from Hydra, which encodes a bona-fide Notch ligand with a conserved domain structure similar to that of Jagged-like Notch ligands from other animals. Hyjagged mRNA is undetectable in adult Hydra by in situ hybridisation but is strongly upregulated and easily visible at the border between bud and parent shortly before bud detachment. In contrast, HyJagged protein is found in all cell types of an adult hydra, where it localises to membranes and endosomes. Co-localisation experiments showed that it is present in the same cells as HvNotch, however not always in the same membrane structures. Conclusions The putative Notch ligand HyJagged is conserved in Cnidarians. Together with HvNotch it may be involved in the formation of the parent-bud boundary in Hydra. Moreover, protein distribution of both, HvNotch receptor and HyJagged indicate a more widespread function for these two transmembrane proteins in the adult hydra, which may be regulated by additional factors, possibly involving endocytic pathways.

  19. Molecular cloning of a preprohormone from Hydra magnipapillata containing multiple copies of Hydra-L Wamide (Leu-Trp-NH2) neuropeptides: evidence for processing at Ser and Asn residues

    DEFF Research Database (Denmark)

    Leviev, I; Williamson, M; Grimmelikhuijzen, C J

    1997-01-01

    The simple, freshwater polyp Hydra is often used as a model to study development in cnidarians. Recently, a neuropeptide, < Glu-Gln-Pro-Gly-Leu-Trp-NH2, has been isolated from sea anemones that induces metamorphosis in a hydroid planula larva to become a polyp. Here, we have cloned a preprohormon...

  20. High-resolution 3D simulations of NIF ignition targets performed on Sequoia with HYDRA

    Science.gov (United States)

    Marinak, M. M.; Clark, D. S.; Jones, O. S.; Kerbel, G. D.; Sepke, S.; Patel, M. V.; Koning, J. M.; Schroeder, C. R.

    2015-11-01

    Developments in the multiphysics ICF code HYDRA enable it to perform large-scale simulations on the Sequoia machine at LLNL. With an aggregate computing power of 20 Petaflops, Sequoia offers an unprecedented capability to resolve the physical processes in NIF ignition targets for a more complete, consistent treatment of the sources of asymmetry. We describe modifications to HYDRA that enable it to scale to over one million processes on Sequoia. These include new options for replicating parts of the mesh over a subset of the processes, to avoid strong scaling limits. We consider results from a 3D full ignition capsule-only simulation performed using over one billion zones run on 262,000 processors which resolves surface perturbations through modes l = 200. We also report progress towards a high-resolution 3D integrated hohlraum simulation performed using 262,000 processors which resolves surface perturbations on the ignition capsule through modes l = 70. These aim for the most complete calculations yet of the interactions and overall impact of the various sources of asymmetry for NIF ignition targets. This work was performed under the auspices of the Lawrence Livermore National Security, LLC, (LLNS) under Contract No. DE-AC52-07NA27344.

  1. Validity of HydraTrend reagent strips for the assessment of hydration status.

    Science.gov (United States)

    Abbey, Bryce M; Heelan, Kate A; Brown, Gregory A; Bartee, Rodrick T

    2014-09-01

    Hydration is used by athletic governing organizations for weight class eligibility. The measurement of urine specific gravity (USG) as a measure of hydration by reagent strips is a controversial issue. The purpose of this study was to determine the validity of HydraTrend reagent strips that facilitate the correction of USG for alkaline urine samples against refractometry for the assessment of USG. Fifty-one participants (33 males, age = 22.3 ± 1.3 years; 18 females, age = 22.4 ± 1.2 years) provided 84 urine samples. The samples were tested for USG using refractometry and reagent strips and for pH using reagent strips and a digital pH meter. Strong correlation coefficients were found between refractometry and reagent strips for USG (rs(82) = 0.812, p refractometry with USG >1.020, pass reagent strips with USG ≤1.020) occurred 39% (33/84) of the time and false negative results for National Federation of State High School Association (NFHS) requirements (fail refractometry with USG >1.025, pass reagent strips with USG ≤1.025) occurred 14% (12/84) of the time. There were no false positives (pass refractometry and fail reagent strips) for NCAA or NFHS requirements. These data show that refractometry and reagent strips have strong positive correlations. However, the risk of a false negative result leading to incorrect certification of euhydration status outweighs the benefits of the HydraTrend reagent strips for the measurement of USG.

  2. A Chandra Observation of the TW Hydrae Association Brown Dwarf 2MASSW J1139511-315921

    CERN Document Server

    Castro, Philip J; Gagné, Marc

    2011-01-01

    We report on a sequence of Chandra X-ray Observatory observations of the TW Hydrae brown dwarf (BD) 2MASSW J1139511-315921 (2M1139). In the combined 31 ks ACIS-S exposure, 2M1139 is detected at the 3-sigma confidence level. We find an X-ray luminosity of L_X = 1.4^(+2.7)_(-1.0) x 10^26 ergs s^-1 or log(L_X/L_bol) = -4.8 +/- 0.3. This object is similar to another TW Hydrae BD member, CD-33 7795B (TWA 5B): both have H-alpha emission, both show no signatures of accretion, and both have comparable ages and spectral types. TWA 5B was previously detected in X-rays with a luminosity of L_X = 4 x 10^27 ergs s^-1 or log(L_X/L_bol) = -3.4, an order of magnitude more luminous in X-rays than 2M1139. We find that the discrepancy between the X-ray luminosity of 2M1139 and TWA 5B is consistent with the spread in X-ray luminosity in the Orion Nebula Cluster (ONC) for BDs of similar spectral types. Though rotation may play a role in the X-ray activity of ultracool dwarfs like 2M1139 and TWA 5B, the discrepancy cannot be expla...

  3. Mutagenesis and functional analysis of the pore-forming toxin HALT-1 from Hydra magnipapillata.

    Science.gov (United States)

    Liew, Yvonne Jing Mei; Soh, Wai Tuck; Jiemy, William Febry; Hwang, Jung Shan

    2015-02-03

    Actinoporins are small 18.5 kDa pore-forming toxins. A family of six actinoporin genes has been identified in the genome of Hydra magnipapillata, and HALT-1 (Hydra actinoporin-like toxin-1) has been shown to have haemolytic activity. In this study, we have used site-directed mutagenesis to investigate the role of amino acids in the pore-forming N-terminal region and the conserved aromatic cluster required for cell membrane binding. A total of 10 mutants of HALT-1 were constructed and tested for their haemolytic and cytolytic activity on human erythrocytes and HeLa cells, respectively. Insertion of 1-4 negatively charged residues in the N-terminal region of HALT-1 strongly reduced haemolytic and cytolytic activity, suggesting that the length or charge of the N-terminal region is critical for pore-forming activity. Moreover, substitution of amino acids in the conserved aromatic cluster reduced haemolytic and cytolytic activity by more than 80%, suggesting that these aromatic amino acids are important for attachment to the lipid membrane as shown for other actinoporins. The results suggest that HALT-1 and other actinoporins share similar mechanisms of pore formation and that it is critical for HALT-1 to maintain an amphipathic helix at the N-terminus and an aromatic amino acid-rich segment at the site of membrane binding.

  4. Mutagenesis and Functional Analysis of the Pore-Forming Toxin HALT-1 from Hydra magnipapillata

    Directory of Open Access Journals (Sweden)

    Yvonne Jing Mei Liew

    2015-02-01

    Full Text Available Actinoporins are small 18.5 kDa pore-forming toxins. A family of six actinoporin genes has been identified in the genome of Hydra magnipapillata, and HALT-1 (Hydra actinoporin-like toxin-1 has been shown to have haemolytic activity. In this study, we have used site-directed mutagenesis to investigate the role of amino acids in the pore-forming N-terminal region and the conserved aromatic cluster required for cell membrane binding. A total of 10 mutants of HALT-1 were constructed and tested for their haemolytic and cytolytic activity on human erythrocytes and HeLa cells, respectively. Insertion of 1–4 negatively charged residues in the N-terminal region of HALT-1 strongly reduced haemolytic and cytolytic activity, suggesting that the length or charge of the N-terminal region is critical for pore-forming activity. Moreover, substitution of amino acids in the conserved aromatic cluster reduced haemolytic and cytolytic activity by more than 80%, suggesting that these aromatic amino acids are important for attachment to the lipid membrane as shown for other actinoporins. The results suggest that HALT-1 and other actinoporins share similar mechanisms of pore formation and that it is critical for HALT-1 to maintain an amphipathic helix at the N-terminus and an aromatic amino acid-rich segment at the site of membrane binding.

  5. Dickkopf related genes are components of the positional value gradient in Hydra.

    Science.gov (United States)

    Augustin, René; Franke, André; Khalturin, Konstantin; Kiko, Rainer; Siebert, Stefan; Hemmrich, Georg; Bosch, Thomas C G

    2006-08-01

    Hydra is a classical model organism to understand fundamental developmental biological processes such as regeneration and axis formation. Here, we show that two genes which share some similarity with members of the Dickkopf family of proteins, HyDkk1/2/4-A and HyDkk1/2/4-C, are co-expressed in gland cells and regulated by the positional value gradient. While HyDkk1/2/4-A is expressed throughout the gastric region, HyDkk1/2/4-C has a graded expression pattern with a high level of transcripts just below the tentacle zone and absence of expression in the budding zone. Blocking the activity of GSK-3beta caused a drastic downregulation of HyDkk1/2/4-C expression in the gastric tissue. Experimental reduction of the number of HyDkk1/2/4-C-expressing cells resulted in expansion of the HyWnt expression domain in the hypostome. Thus, similar to Dickkopf proteins in vertebrates, one of the functions of HyDkk1/2/4-C in hydra may be to antagonize Wnt signalling.

  6. Central Mass Profiles of the Nearby Cool-core Galaxy Clusters Hydra A and A478

    CERN Document Server

    Okabe, N; Tamura, T; Fujita, Y; Takizawa, M; Matsushita, K; Fukazawa, Y; Futamase, T; Kawaharada, M; Miyazaki, S; Mochizuki, Y; Nakazawa, K; Ohashi, T; Ota, N; Sasaki, T; Sato, K; Tam, S I

    2015-01-01

    We perform a weak-lensing study of the nearby cool-core galaxy clusters, Hydra A ($z=0.0538$) and A478 ($z=0.0881$), of which brightest cluster galaxies (BCGs) host powerful activities of active galactic nuclei (AGNs). For each cluster, the observed tangential shear profile is well described either by a single Navarro--Frenk--White model or a two-component model including the BCG as an unresolved point mass. For A478, we determine the BCG and its host-halo masses from a joint fit to weak-lensing and stellar photometry measurements. We find that the choice of initial mass functions (IMFs) can introduce a factor of two uncertainty in the BCG mass, whereas the BCG host halo mass is well constrained by data. We perform a joint analysis of weak-lensing and stellar kinematics data available for the Hydra A cluster, which allows us to constrain the central mass profile without assuming specific IMFs.We find that the central mass profile ($r<300$ kpc) determined from the joint analysis is in excellent agreement wi...

  7. Analysis of vascular development in the hydra sterol biosynthetic mutants of Arabidopsis.

    Directory of Open Access Journals (Sweden)

    Margaret Pullen

    Full Text Available The control of vascular tissue development in plants is influenced by diverse hormonal signals, but their interactions during this process are not well understood. Wild-type sterol profiles are essential for growth, tissue patterning and signalling processes in plant development, and are required for regulated vascular patterning.Here we investigate the roles of sterols in vascular tissue development, through an analysis of the Arabidopsis mutants hydra1 and fackel/hydra2, which are defective in the enzymes sterol isomerase and sterol C-14 reductase respectively. We show that defective vascular patterning in the shoot is associated with ectopic cell divisions. Expression of the auxin-regulated AtHB8 homeobox gene is disrupted in mutant embryos and seedlings, associated with variably incomplete vascular strand formation and duplication of the longitudinal axis. Misexpression of the auxin reporter proIAA2ratioGUS and mislocalization of PIN proteins occurs in the mutants. Introduction of the ethylene-insensitive ein2 mutation partially rescues defective cell division, localization of PIN proteins, and vascular strand development.The results support a model in which sterols are required for correct auxin and ethylene crosstalk to regulate PIN localization, auxin distribution and AtHB8 expression, necessary for correct vascular development.

  8. Different Endosymbiotic Interactions in Two Hydra Species Reflect the Evolutionary History of Endosymbiosis

    KAUST Repository

    Ishikawa, Masakazu

    2016-06-19

    Endosymbiosis is an important evolutionary event for organisms, and there is widespread interest in understanding the evolution of endosymbiosis establishment. Hydra is one of the most suitable organisms for studying the evolution of endosymbiosis. Within the genus Hydra, H. viridissima and H. vulgaris show endosymbiosis with green algae. Previous studies suggested that the endosymbiosis in H. vulgaris took place much more recently than that in H. viridissima, noting that the establishment of the interaction between H. vulgaris and its algae is not as stable as in H. viridissima. To investigate the on-going process of endosymbiosis, we first compared growth and tolerance to starvation in symbiotic and aposymbiotic polyps of both species. The results revealed that symbiotic H. viridissima had a higher growth rate and greater tolerance to starvation than aposymbiotic polyps. By contrast, growth of symbiotic H. vulgaris was identical to that of aposymbiotic polyps, and symbiotic H. vulgaris was less tolerant to starvation. Moreover, our gene expression analysis showed a pattern of differential gene expression in H. viridissima similar to that in other endosymbiotically established organisms, and contrary to that observed in H. vulgaris. We also showed that H. viridissima could cope with oxidative stress that caused damage, such as cell death, in H. vulgaris. These observations support the idea that oxidative stress related genes play an important role in the on-going process of endosymbiosis evolution. The different evolutionary stages of endosymbiosis studied here provide a deeper insight into the evolutionary processes occurring toward a stable endosymbiosis.

  9. Direct Evidence for Outflow of Metal-enriched Gas Along the Radio Jets of Hydra A

    CERN Document Server

    Kirkpatrick, C C; Cavagnolo, K W; McNamara, B R; David, L P; Nulsen, P E J; Wise, M W

    2009-01-01

    Using deep Chandra observations of the Hydra A galaxy cluster, we examine the metallicity structure near the central galaxy and along its powerful radio source. We show that the metallicity of the intracluster medium is enhanced by up to 0.2 dex along the radio jets and lobes compared to the metallicity of the undisturbed gas. The enhancements extend from a radius of 20 kpc from the central galaxy to a distance of ~ 120 kpc. We estimate the total iron mass that has been transported out of the central galaxy to be between 2 x 10^7 M_sun and 7 x 10^7 M_sun which represents 10% - 20% of the iron mass within the central galaxy. The energy required to lift this gas is roughly 1% to 5% of the total energetic output of the AGN. Evidently, Hydra A's powerful radio source is able to redistribute metal-enriched, low entropy gas throughout the core of the galaxy cluster. The short re-enrichment time scale < 10^9 yr implies that the metals lost from the central galaxy will be quickly replenished.

  10. Jet-Intracluster Medium interaction in Hydra A. I Estimates of jet velocity from inner knots

    CERN Document Server

    Nawaz, M A; Bicknell, G V; Sutherland, R S; McNamara, B R

    2014-01-01

    We present the first stage of an investigation of the interactions of the jets in the radio galaxy Hydra A with the intracluster medium. We consider the jet kinetic power, the galaxy and cluster atmosphere, and the inner structure of the radio source. Analysing radio observations of the inner lobes of Hydra A by Taylor et al. (1990) we confirm the jet power estimates of about 1e45 ergs/s derived by Wise et al. (2007) from dynamical analysis of the X-ray cavities. With this result and a model for the galaxy halo, we explore the jet-intracluster medium interactions occurring on a scale of 10 kpc using two-dimensional, axisymmetric, relativistic pure hydrodynamic simulations. A key feature is that we identify the three bright knots in the northern jet as biconical reconfinement shocks, which result when an over pressured jet starts to come into equilibrium with the galactic atmosphere. Through an extensive parameter space study we deduce that the jet velocity is approximately 0.8 c at a distance 0.5 kpc from the...

  11. Testing the cooling flow model in the intermediate polar EX Hydrae

    CERN Document Server

    Luna, G J M; Brickhouse, N S; Mauche, C W; Suleimanov, V; .,

    2015-01-01

    We use the best available X-ray data from the intermediate polar EX Hydrae to study the cooling-flow model often applied to interpret the X-ray spectra of these accreting magnetic white dwarf binaries. First, we resolve a long-standing discrepancy between the X-ray and optical determinations of the mass of the white dwarf in EX Hya by applying new models of the inner disk truncation radius. Our fits to the X-ray spectrum now agree with the white dwarf mass of 0.79 M$_{\\odot}$sun determined using dynamical methods through spectroscopic observations of the secondary. We use a simple isobaric cooling flow model to derive the emission line fluxes, emission measure distribution, and H-like to He-like line ratios for comparison with the 496 ks Chandra High Energy Transmission Grating observation of EX Hydrae. We find that the H/He ratios are not well reproduced by this simple isobaric cooling flow model and show that while H-like line fluxes can be accurately predicted, fluxes of lower-Z He-like lines are significa...

  12. The Super Gaussian Laser Intensity Profile in HYDRA's 3D Laser Ray Trace Package

    Energy Technology Data Exchange (ETDEWEB)

    Sepke, Scott M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-01-05

    In this note, the laser focal plane intensity pro le for a beam modeled using the 3D ray trace package in HYDRA is determined. First, the analytical model is developed followed by a practical numerical model for evaluating the resulting computationally intensive normalization factor for all possible input parameters.

  13. Ultrastructural localization of RFamide-like peptides in neuronal dense-cored vesicles in the peduncle of Hydra

    DEFF Research Database (Denmark)

    Koizumi, O; Wilson, Douglas Clyde; Grimmelikhuijzen, C J

    1989-01-01

    The presence of Arg-Phe-amide (RFamide)-like peptides in dense-cored vesicles in neurons of the peduncle of Hydra was demonstrated by immunogold electron microscopy. Thin sections of Lowicryl-embedded tissue labeled with antisera to RFamide and 5-nm gold-conjugated, secondary antibody and of Epon...

  14. A new species of hydra (Cnidaria: Hydrozoa: Hydridae) and molecular phylogenetic analysis of six congeners from China.

    Science.gov (United States)

    Wang, An-Tai; Deng, Li; Liu, Hong-Tao

    2012-12-01

    A new species of genus Hydra (Cnidaria: Hydrozoa: Hydridae), Hydra shenzhensis sp. nov. from Guangdong Province, China, is described and illustrated. Most polyps have five tentacles. Column length reaches 11 mm when relaxed. Buds do not acquire tentacles synchronously. Stenotele is broad and pyriform in shape, 1.2 times as long as its width. Holotrichous isorhiza is asymmetrical and slender (more than 2.7 times as long as its width), with transverse and slanting coils. Atrichous isorhiza is long, resembling a melon-seed in shape. Desmoneme is asymmetrically pyriform in shape. The new species, belonging to the vulgaris group, is dioecious; sexual reproduction was found to occur mostly during November and December under conditions of dense culture or food shortage. Two to thirteen testes, cone-like shape with papilla, formed beneath the tentacles. One to three ovaries, with an egg cup, milky white in color, formed on body column. Ninety percent of individuals developed only one ovum. On a mother polyp, a fertilized ovum developed an embryonic theca covering its surface. The embryotheca is brown, with a spine-like structure, covering a layer of transparent, membrane-like material. For phylogenetic analysis, the mitochondrial cytochrome oxidase subunit I gene (COI) of six hydra species collected from China was amplified by polymerase chain reaction (PCR) and sequenced. Morphological characters in combination with molecular evidence support the hydra described here as a new species.

  15. Hydra II: A Faint and Compact Milky Way Dwarf Galaxy Found in the Survey of the Magellanic Stellar History

    NARCIS (Netherlands)

    Martin, Nicolas F.; Nidever, David L.; Besla, Gurtina; Olsen, Knut; Walker, Alistair R.; Vivas, A. Katherina; Gruendl, Robert A.; Kaleida, Catherine C.; Muñoz, Ricardo R.; Blum, Robert D.; Saha, Abhijit; Conn, Blair C.; Bell, Eric F.; Chu, You-Hua; Cioni, Maria-Rosa L.; de Boer, Thomas J. L.; Gallart, Carme; Jin, Shoko; Kunder, Andrea; Majewski, Steven R.; Martinez-Delgado, David; Monachesi, Antonela; Monelli, Matteo; Monteagudo, Lara; Noël, Noelia E. D.; Olszewski, Edward W.; Stringfellow, Guy S.; van der Marel, Roeland P.; Zaritsky, Dennis

    We present the discovery of a new dwarf galaxy, Hydra II, found serendipitously within the data from the ongoing Survey of the Magellanic Stellar History conducted with the Dark Energy Camera on the Blanco 4 m Telescope. The new satellite is compact ({{r}h}=68 ± 11 pc) and faint ({{M}V}=-4.8 ± 0.3),

  16. X-Ray Supercavities in the Hydra A Cluster and the Outburst History of the Central Galaxy's Active Nucleus

    NARCIS (Netherlands)

    Wise, M.; McNamara, B.R.; Nulsen, P.E.J.; Houck, J.C.; David, L.P.

    2007-01-01

    A 227 ks Chandra X-ray image of the hot plasma in the Hydra A cluster has revealed an extensive cavity system. The system was created by a continuous outflow or a series of bursts from the nucleus of the central galaxy over the past 200-500 Myr. The cavities have displaced 10% of the plasma within a

  17. The identity and occurrence of Kerona pediculus (Ciliophora: Hypotrichida), a well-known epizoite of Hydra vulgaris (Cnidaria: Hydrozoa)

    NARCIS (Netherlands)

    Warren, A.; Robson, E.A.

    1998-01-01

    Epizoic Kerona pediculus have been found on Hydra vulgaris and on Cristatella mucedo (Bryozoa) in the same habitat. On the basis of morphological characters (using Nomarski and Scanning Electron Microscopy) specimens from the two hosts are indistinguishable. Details revealed by SEM agree with

  18. Hydra phantom applicability for carrying out tests of field uniformity in gamma cameras; Aplicabilidade do fantoma hydra para realizacao dos testes de uniformidade de campo em gama camaras

    Energy Technology Data Exchange (ETDEWEB)

    Aragao Filho, Geraldo L., E-mail: geraldo_lemos10@hotmail.com [Centro de Medicina Nuclear de Pernambuco (CEMUPE), Recife, PE (Brazil); Oliveira, Alex C.H., E-mail: oliveira_ach@yahoo.com [Universidade Federal de Pernambuco (DEN/UFPE), Recife, PE (Brazil). Dept. de Energia Nuclear; Lopes Filho, Ferdinand J.; Vieira, Jose W., E-mail: ferdinand.lopes@oi.com.br, E-mail: jose-wilson59@live.com [Instituto Federal de Pernambuco (IFPE), Recife, PE (Brazil)

    2014-07-01

    Nuclear Medicine is a medical modality that makes use of radioactive material 'in vivo' in humans, making them a temporary radioactive source. The radiation emitted by the patient's body is detected by a specific equipment, called a gamma camera, creates an image showing the spatial and temporal biodistribution of radioactive material administered to the patient. Therefore, it's of fundamental importance a number of specific measures to make sure that procedure be satisfactory, called quality control. To Nuclear Medicine, quality control of gamma camera has the purpose of ensuring accurate scintillographic imaging, truthful and reliable for the diagnosis, guaranteeing visibility and clarity of details of structures, and also to determine the frequency and the need for preventive maintenance of equipment. To ensure the quality control of the gamma camera it's necessary to use some simulators, called phantom, used in Nuclear Medicine to evaluate system performance, system calibration and simulation of injuries. The goal of this study was to validate a new simulator for nuclear medicine, the Hydra phantom. The phantom was initially built for construction of calibration curves used in radiotherapy planning and quality control in CT. It has similar characteristics to specific phantoms in nuclear medicine, containing inserts and water area. Those inserts are regionally sourced materials, many of them are already used in the literature and based on information about density and interaction of radiation with matter. To verify its efficiency in quality control in Nuclear Medicine, was performed a test for uniformity field, one of the main tests performed daily, so we can verify the ability of the gamma camera to reproduce a uniform distribution of the administered activity in the phantom, been analysed qualitatively, through the image, and quantitatively, through values established for Central Field Of View (CFOV) and Useful Field Of View (UFOV

  19. Charon's, Hydra's, and Nix's near IR spectra as seen by New Horizons

    Science.gov (United States)

    Dalle Ore, Cristina M.; Cook, Jason C.; Cruikshank, Dale P.; Protopapa, Silvia; Grundy, William M.; Olkin, Catherine B.; Ennico, Kimberly; Stern, S. Alan; Weaver, Harold A.; Young, Leslie; New Horizons Surface Composition Theme Team

    2016-10-01

    Charon, Pluto's largest satellite, is a predominantly grey-color icy world covered mostly in H2O ice, with spectral evidence for NH3 and/or its hydrates, as previously reported (Cook et al. 2007, ApJ. 663, 1406; Verbiscer et al. 2007, LPSC 38, 2318; Merlin et al. 2010, Icarus, 210, 930; Cook et al. 2014, AAS/DPS Abstracts, 46, #401.04; Holler et al. 2016, submitted, arXiv:1606.05695). In their 2010 work, Merlin et al. reported the presence of ammonia species along with H2O ice both in crystalline and amorphous phase. They introduced a blue component to model the slope present in their near-IR observations, which could not be otherwise reproduced without the adoption of an ad hoc component. The presence of ammonia and H2O in its crystalline form prompted Cook et al. (2007) to suggest cryovolcanism as a favored mechanism of resurfacing although the geological evidence for volcanism reported from New Horizons imaging observations does not appear to be recent (Moore et al. Science, 351, 1284).We analyze one of New Horizons' observations of Charon taken with the LEISA imaging spectrometer from a distance of ~82,000 km at high spatial resolution (4.9 km/pixel). Images from the New Horizons spacecraft reveal a surface with terrains of seemingly different ages and a moderate degree of localized coloration.Hydra was observed by New Horizons at a distance 240,000 and 370,000 hardly resolving its disk. Nix on the other hand was observed from a much more favorable distance of 60,000 and 162,000 km revealing a nearly uniform surface coloration and structure.Although Hydra could hardly be resolved at the flyby distance we have obtained its spectral signature and we compare it with those of Charon and Nix. A feature at ~2.2 µm, corresponding to the NH3 and/or NH3 hydrates, is visible subtly on Charon and clearly on Hydra and Nix hinting at the possibility that NH3 might be less volatile than previously thought and making the need for recent cryovolcanism less crucial

  20. Poverty, violence, and family disorganization: Three "Hydras" and their role in children's street movement in Bangladesh.

    Science.gov (United States)

    Reza, Md Hasan

    2016-05-01

    The increasing number of children running away from home in Bangladesh is a major concern, and in need of critical attention. This yearlong study explores why children leave home with a sample of street children in Dhaka, Bangladesh. Purposive sampling from three locations in Dhaka yielded a sample of 75 homeless children aged 10-17. For each participant, a 60-90min in-depth qualitative interview was conducted multiple times. While the dominant explanations rely on poverty or abuse, the findings of this study reveal that the cause is actually three heads of a Hydra monster: poverty, abuse, and family disorganization and their interactions. It shows that the primary reasons for children breaking from their family are all interrelated. The findings from this study are likely to add knowledge regarding the issues and may lead to preventative interventions for street children and their families.

  1. GTRF Calculations Using Hydra-TH (THM.CFD.P5.05)

    Energy Technology Data Exchange (ETDEWEB)

    Bakosi, Jozsef [Los Alamos National Laboratory; Christon, Mark A. [Los Alamos National Laboratory; Francois, Marianne M. [Los Alamos National Laboratory; Lowrie, Robert B. [Los Alamos National Laboratory; Nourgaliev, Robert [Los Alamos National Laboratory

    2012-09-05

    This report describes the work carried out for completion of the Thermal Hydraulics Methods (THM) Level 3 Milestone THM.CFD.P5.05 for the Consortium for Advanced Simulation of Light Water Reactors (CASL). A series body-fitted computational meshes have been generated by Numeca's Hexpress/Hybrid, a.k.a. 'Spider', meshing technology for the V5H 3x3 and 5x5 rod bundle geometry used to compute the fluid dynamics of grid-to-rod fretting (GTRF). Spider is easy to use, fast, and automatically generates high-quality meshes for extremely complex geometries, required for the GTRF problem. Hydra-TH has been used to carry out large-eddy simulations on both 3x3 and 5x5 geometries, using different mesh resolutions. The results analyzed show good agreement with Star-CCM+ simulations and experimental data.

  2. VizieR Online Data Catalog: Hydra I Cluster Catalogue (HCC) (Misgeld+, 2008)

    Science.gov (United States)

    Misgeld, I.; Mieske, S.; Hilker, M.

    2008-07-01

    The obtained photometric parameters along with the available radial velocities for all early-type galaxies in our sample (111 objects) are presented in the Hydra I Cluster Catalogue (HCC). For each galaxy right ascension, declination, extinction corrected magnitude V and colour V-I, central surface brightness and scale length of an exponential fit to the surface brightness profile, effective surface brightness, effective radius and profile shape index n, as obtained from a Sersic fit, are given. The physical scale is 0.2kpc/arcsec at the assumed distance modulus of (m-M)=33.07mag. The radial velocities are taken from our study and from Christlein & Zabludoff (2003ApJ...591..764C). (1 data file).

  3. Toxicity of water and sediment from stormwater retarding basins to Hydra hexactinella

    DEFF Research Database (Denmark)

    Rosenkrantz, Rikke Tjørnhøj; Pollino, Carmel A.; Nugegoda, Dayanthi;

    2008-01-01

    of 50 ml/L and 100 ml/L, while the 7 h pulse exposure caused a significant increase in the mean population growth rate compared to the control. Water samples from the two other retarding basins were found non-toxic to H. hexactinella. This is the first study to employ sediment tests with Hydra spp....... on stormwater sediments and a lower population growth rate was observed for organisms exposed to sediment from the Avoca St retarding basins. The behavioral study showed that H. hexactinella tended to avoid the sediment-water interface when exposed to sediment from all retarding basins, compared...... to the reference sediment. Further work is needed to determine the long-term effects of stormwater polluted sediments and acute effects due to organism exposure to short-term high concentrations during rain events. (C) 2008 Elsevier Ltd. All rights reserved....

  4. GTRF Calculations Using Hydra-TH (L3 Milestone THM.CFD.P5.05)

    Energy Technology Data Exchange (ETDEWEB)

    Bakosi, Jozsef [Los Alamos National Laboratory; Christon, Mark A. [Los Alamos National Laboratory; Francois, Marianne M. [Los Alamos National Laboratory; Lowrie, Robert B. [Los Alamos National Laboratory; Nourgaliev, Robert [Los Alamos National Laboratory

    2012-09-05

    This report describes the work carried out for completion of the Thermal Hydraulics Methods (THM) Level 3 Milestone THM.CFD.P5.05 for the Consortium for Advanced Simulation of Light Water Reactors (CASL). A series of body-fitted computational meshes have been generated by Numeca's Hexpress/Hybrid, a.k.a. 'Spider', meshing technology for the V5H 3 x 3 and 5 x 5 rod bundle geometries and subsequently used to compute the fluid dynamics of grid-to-rod fretting (GTRF). Spider is easy to use, fast, and automatically generates high-quality meshes for extremely complex geometries, required for the GTRF problem. Hydra-TH has been used to carry out large-eddy simulations on both 3 x 3 and 5 x 5 geometries, using different mesh resolutions. The results analyzed show good agreement with Star-CCM+ simulations and experimental data.

  5. 2D HYDRA Calculations of Magneto-Rayleigh-Taylor Growth and Feedthrough in Cylindrical Liners

    Science.gov (United States)

    Weis, Matthew; Zhang, Peng; Lau, Y. Y.; Gilgenbach, Ronald; Peterson, Kyle; Hess, Mark

    2014-10-01

    Cylindrical liner implosions are susceptible to the magneto-Rayleigh-Taylor instability (MRT), along with the azimuthal current-carrying modes (sausage, kink, etc). ``Feedthrough'' of these instabilities has a strong influence on the integrity of the liner/fuel interface in the magnetized liner inertial fusion concept (MagLIF). The linearized ideal MHD equations can be solved to quantify these effects, including the presence of an effective gravity and an axial magnetic field. We investigate the potential of this field to mitigate feedthrough, due to MRT growth from various initial surface finishes (seeded, rough), throughout the implosion using our analytic results and the LLNL code, HYDRA. We will present both low and high convergence cases. Lastly, we illustrate the effect shock compression can have on feedthrough in seeded liners for various fill gases (cold and pre-heated) and magnetic field configurations. M. R. Weis was supported by the Sandia National Laboratories.

  6. Development of the two-part pattern during regeneration of the head in hydra

    DEFF Research Database (Denmark)

    Bode, Matthias; Awad, T A; Koizumi, O;

    1988-01-01

    The head of a hydra is composed of two parts, a domed hypostome with a mouth at the top and a ring of tentacles below. When animals are decapitated a new head regenerates. During the process of regeneration the apical tip passes through a transient stage in which it exhibits tentacle...... began evaginating in a ring, both the TS-19 antigen and RLI+ ganglion cells gradually disappeared from the presumptive hypostome area and RLI+ sensory cells appeared at the apex. By tracking tissue movements during morphogenesis it became clear that the apical cap, in which these changes took place, did...... not undergo tissue turnover. The implications of this tentacle-like stage for patterning the two-part head are discussed....

  7. Jet-Intracluster Medium interaction in Hydra A. II The Effect of Jet Precession

    CERN Document Server

    Nawaz, M A; Wagner, A Y; Sutherland, R S; McNamara, B R

    2016-01-01

    We present three dimensional relativistic hydrodynamical simulations of a precessing jet interacting with the intracluster medium and compare the simulated jet structure with the observed structure of the Hydra A northern jet. For the simulations, we use jet parameters obtained in the parameter space study of the first paper in this series and probe different values for the precession period and precession angle. We find that for a precession period P = 1 Myr and a precession angle = 20 degree the model reproduces i) the curvature of the jet, ii) the correct number of bright knots within 20 kpc at approximately correct locations, and iii) the turbulent transition of the jet to a plume. The Mach number of the advancing bow shock = 1.85 is indicative of gentle cluster atmosphere heating during the early stages of the AGN's activity.

  8. CIRCUMBINARY CHAOS: USING PLUTO'S NEWEST MOON TO CONSTRAIN THE MASSES OF NIX AND HYDRA

    Energy Technology Data Exchange (ETDEWEB)

    Youdin, Andrew N.; Kratter, Kaitlin M.; Kenyon, Scott J. [Harvard-Smithsonian Center for Astrophysics, 60 Garden St., Cambridge, MA 02138 (United States)

    2012-08-10

    The Pluto system provides a unique local laboratory for the study of binaries with multiple low-mass companions. In this paper, we study the orbital stability of P4, the most recently discovered moon in the Pluto system. This newfound companion orbits near the plane of the Pluto-Charon (PC) binary, roughly halfway between the two minor moons Nix and Hydra. We use a suite of few body integrations to constrain the masses of Nix and Hydra, and the orbital parameters of P4. For the system to remain stable over the age of the solar system, the masses of Nix and Hydra likely do not exceed 5 Multiplication-Sign 10{sup 16} kg and 9 Multiplication-Sign 10{sup 16} kg, respectively. These upper limits assume a fixed mass ratio between Nix and Hydra at the value implied by their median optical brightness. Our study finds that stability is more sensitive to their total mass and that a downward revision of Charon's eccentricity (from our adopted value of 0.0035) is unlikely to significantly affect our conclusions. Our upper limits are an order of magnitude below existing astrometric limits on the masses of Nix and Hydra. For a density at least that of ice, the albedos of Nix and Hydra would exceed 0.3. This constraint implies they are icy, as predicted by giant impact models. Even with these low masses, P4 only remains stable if its eccentricity e {approx}< 0.02. The 5:1 commensurability with Charon is particularly unstable, combining stability constraints with the observed mean motion places the preferred orbit for P4 just exterior to the 5:1 resonance. These predictions will be tested when the New Horizons satellite visits Pluto. Based on the results for the PC system, we expect that circumbinary, multi-planet systems will be more widely spaced than their singleton counterparts. Further, circumbinary exoplanets close to the three-body stability boundary, such as those found by Kepler, are less likely to have other companions nearby.

  9. Cell type complexity in the basal metazoan Hydra is maintained by both stem cell based mechanisms and transdifferentiation.

    Science.gov (United States)

    Siebert, Stefan; Anton-Erxleben, Friederike; Bosch, Thomas C G

    2008-01-01

    Understanding the mechanisms controlling the stability of the differentiated cell state is a fundamental problem in biology. To characterize the critical regulatory events that control stem cell behavior and cell plasticity in vivo in an organism at the base of animal evolution, we have generated transgenic Hydra lines [Wittlieb, J., Khalturin, K., Lohmann, J., Anton-Erxleben, F., Bosch, T.C.G., 2006. Transgenic Hydra allow in vivo tracking of individual stem cells during morphogenesis. Proc. Natl. Acad. Sci. U. S. A. 103, 6208-6211] which express eGFP in one of the differentiated cell types. Here we present a novel line which expresses eGFP specifically in zymogen gland cells. These cells are derivatives of the interstitial stem cell lineage and have previously been found to express two Dickkopf related genes [Augustin, R., Franke, A., Khalturin, K., Kiko, R., Siebert, S. Hemmrich, G., Bosch, T.C.G., 2006. Dickkopf related genes are components of the positional value gradient in Hydra. Dev. Biol. 296 (1), 62-70]. In the present study we have generated transgenic Hydra in which eGFP expression is under control of the promoter of one of them, HyDkk1/2/4 C. Transgenic Hydra recapitulate faithfully the previously described graded activation of HyDkk1/2/4 C expression along the body column, indicating that the promoter contains all elements essential for spatial and temporal control mechanisms. By in vivo monitoring of eGFP+ gland cells, we provide direct evidence for continuous transdifferentiation of zymogen cells into granular mucous cells in the head region. We also show that in this tissue a subpopulation of mucous gland cells directly derives from interstitial stem cells. These findings indicate that both stem cell-based mechanisms and transdifferentiation are involved in normal development and maintenance of cell type complexity in Hydra. The results demonstrate a remarkable plasticity in the differentiation capacity of cells in an organism which diverged before

  10. Suzaku Observations of the Hydra A Cluster out to the Virial Radius

    Science.gov (United States)

    Sato, Takuya; Sasaki, Toru; Matsushita, Kyoko; Sakuma, Eri; Sato, Kosuke; Fujita, Yutaka; Okabe, Nobuhiro; Fukazawa, Yasushi; Ichikawa, Kazuya; Kawaharada, Madoka; Nakazawa, Kazuhiro; Ohashi, Takaya; Ota, Naomi; Takizawa, Motokazu; Tamura, Takayuki

    2012-10-01

    We report on Suzaku observations of the northern half of the Hydra A cluster out to ˜ 1.4 Mpc, reaching the virial radius. There are the first Suzaku observations of a medium-size (kT ˜ 3 keV) cluster out to the virial radius. Two observations were conducted, north-west and north-east offsets, which continue in a filament direction and a void direction of the large-scale structure of the Universe, respectively. The X-ray emission and distribution of galaxies elongate in the filament direction. The temperature profiles in the two directions are mostly consistent with each other within the error bars, and drop to 1.5 keV at 1.5 r500 . As observed by Suzaku in hot clusters, the entropy profile becomes flatter beyond r500 , in disagreement with the r1.1 relationship, which is expected from accretion shock heating models. When scaled with the average intracluster medium (ICM) temperature, the entropy profiles of clusters observed with Suzaku are universal, and do not depend on the system mass. The hydrostatic mass values in the void and filament directions are in good agreement, and the Navarro, Frenk, and White universal mass profile represents the hydrostatic mass distribution up to ˜ 2r500 . Beyond r500 , the ratio of the gas mass to the hydrostatic mass exceeds the result of the Wilkinson microwave anisotropy probe, and at r100 , these ratios in the filament and void directions reach 0.4 and 0.3, respectively. We discuss possible deviations from the hydrostatic equilibrium at cluster outskirts. We derived radial profiles of the gas-mass-to-light ratio and the iron-mass-to-light ratio out to the virial radius. Within r500 , the iron-mass-to-light ratio of the Hydra A cluster was compared with those in other clusters observed with Suzaku.

  11. Toxaphene affects the levels of mRNA transcripts that encode antioxidant enzymes in Hydra.

    Science.gov (United States)

    Woo, Seonock; Lee, Aekyung; Won, Hyokyoung; Ryu, Jae-Chun; Yum, Seungshic

    2012-06-01

    We evaluated toxaphene-induced acute toxicity in Hydra magnipapillata. The median lethal concentrations of the animals (LC(50)) were determined to be 34.5 mg/L, 25.0 mg/L and 12.0 mg/L after exposure to toxaphene for 24 h, 48 h and 72 h, respectively. Morphological responses of hydra polyps to a range of toxaphene concentrations suggested that toxaphene negatively affects the nervous system of H. magnipapillata. We used real-time quantitative PCR of RNA extracted from polyps exposed to two concentrations of toxaphene (0.3 mg/L and 3 mg/L) for 24 h to evaluate the differential regulation of levels of transcripts that encode six antioxidant enzymes (CAT, G6PD, GPx, GR, GST and SOD), two proteins involved in detoxification and molecular stress responses (CYP1A and UB), and two proteins involved in neurotransmission and nerve cell differentiation (AChE and Hym-355). Of the genes involved in antioxidant responses, the most striking changes were observed for transcripts that encode GPx, G6PD, SOD, CAT and GST, with no evident change in levels of transcripts encoding GR. Levels of UB and CYP1A transcripts increased in a dose-dependent manner following exposure to toxaphene. Given that toxaphene-induced neurotoxicity was not reflected in the level of AChE transcripts and only slight accumulation of Hym-355 transcript was observed only at the higher of the two doses of toxaphene tested, there remains a need to identify transcriptional biomarkers for toxaphene-mediated neurotoxicity in H. magnipapillata. Transcripts that respond to toxaphene exposure could be valuable biomarkers for stress levels in H. magnipapillata and may be useful for monitoring the pollution of aquatic environments.

  12. Discovery of very high velocity outflow in V Hydra - Wind from an accretion disk in a binary?

    Science.gov (United States)

    Sahai, R.; Wannier, P. G.

    1988-01-01

    High-resolution observations of lines from the CO v = 1-0 vibration-rotation band at 4.6 microns, taken with the FTS/KPNO 4-m telescope, are reported for the carbon-rich red giant V Hydra, which is surrounded by an extended expanding molecular envelope resulting from extensive mass loss. The spectrum shows, in addition to the expected absorption at the outflow velocity of the envelope, absorption extending up to 120 km/s bluewards of the stellar velocity. A comparison of the spectrum observed at two epochs shows that the high-velocity absorption features change with time. It is suggested that the observed high-velocity features in V Hydra arise in a high-velocity polar outflow from an accretion disk in a binary system, as proposed in the mass-loss model for bipolar envelopes by Morris (1988).

  13. Karyotyping and single-gene detection using fluorescence in situ hybridization on chromosomes of Hydra magnipapillata (Cnidaria: Hydrozoa

    Directory of Open Access Journals (Sweden)

    B Anokhin

    2010-12-01

    Full Text Available The fresh water polyp Hydra L., 1758 (Cnidaria, Hydrozoa plays a key role as a model organism in modern evolutionary and developmental biology. A complete genome sequence has been published recently for Hydra magnipapillata Ito, 1947 and molecular data are rapidly accumulating in the literature, but little information is available on its chromosomes. In this study, an efficient fluorescence in situ hybridization (FISH method is described for H. magnipapillata which not only allows identification of the chromosomes but also visualization of the location of individual genetic loci. Together with cDNA and genomic sequencing this may provide the foundation for increasingly precise genetic and physical mapping in this basal metazoan model organism.

  14. GLOMOMIDIELLA N. GEN. (FORAMINIFERA, MILIOLATA, NEODISCIDAE: A NEW GENUS FROM THE LATE GUADALUPIAN-LOPINGIAN OF HYDRA ISLAND (GREECE

    Directory of Open Access Journals (Sweden)

    DANIEL VACHARD

    2008-11-01

    Full Text Available A new genus of Foraminifera (Miliolata, Cornuspiroidea, Neodiscidae is erected from the late Guadalupian (Capitanian = Midian to Lopingian sedimentary succession of the island of Hydra (Greece. It represents an important phylogenetic form, probably at the origin of several genera (or subfamilies of the authors that became relatively widespread during the Lopingian (Late Permian. Glomomidiella n. gen. is characterized by an entirely glomospiral coiling and rudimentary pseudoseptation. 

  15. Hydra II: a faint and compact Milky Way dwarf galaxy found in the Survey of the Magellanic Stellar History

    CERN Document Server

    Martin, Nicolas F; Besla, Gurtina; Olsen, Knut; Walker, Alistair R; Vivas, A Katherina; Gruendl, Robert A; Muñoz, Ricardo R; Blum, Robert D; Saha, Abhijit; Conn, Blair C; Bell, Eric F; Chu, You-Hua; Cioni, Maria-Rosa L; de Boer, Thomas J L; Gallart, Carme; Jin, Shoko; Kunder, Andrea; Majewski, Steven R; Martinez-Delgado, David; Monachesi, Antonela; Monelli, Matteo; Monteagudo, Lara; Noël, Noelia E D; Olszewski, Edward W; Stringfellow, Guy S; van der Marel, Roeland P; Zaritsky, Denis

    2015-01-01

    We present the discovery of a new dwarf galaxy, Hydra II, found serendipitously within the data from the ongoing Survey of the MAgellanic Stellar History (SMASH) conducted with the Dark Energy Camera on the Blanco 4m Telescope. The new satellite is compact (r_h = 68 +/- 11 pc) and faint (M_V = -4.8 +/- 0.3), but well within the realm of dwarf galaxies. The stellar distribution of HydraII in the color-magnitude diagram is well-described by a metal-poor ([Fe/H] = -2.2) and old (13 Gyr) isochrone and shows a distinct blue horizontal branch, some possible red clump stars, and faint stars that are suggestive of blue stragglers. At a heliocentric distance of 134 +/- 10 kpc, Hydra II is located in a region of the Galactic halo that models have suggested may host material from the leading arm of the Magellanic Stream. A comparison with N-body simulations hints that the new dwarf galaxy could be or could have been a satellite of the Magellanic Clouds.

  16. Hydratools manual version 1.0, documentation for a MATLAB®-based post-processing package for the Sontek Hydra

    Science.gov (United States)

    Martini, Marinna; Sherwood, Chris; Horwitz, Rachel; Ramsey, Andree; Lightsom, Fran; Lacy, Jessie; Xu, Jingping

    2006-01-01

    The Sediment Transport Instrumentation Group (STG) at the U.S. Geological Survey (USGS) Woods Hole Science Center has a long-standing comitment to providing scientists with high quality oceanographic data. To meet this commitment, STG personnel are vigilant in checking data as well as hardware for signs of instrument malfunction. STG data sets are accompanied by processing histories to detail data processing procedures that may have modified the natural data signal while removing noise from the data. The history also allows the data to be reprocessed in the ligth of new insight into instrument function and moored conditions. This toolbox was compiled to meet these data quality commitments for data generated by Sontek Hydra systems using both ADV and PCADP probes. In the mid 1900's, the USGS Coastal and Marine Program began frequent deployments of Sontek Hydra systems in support of projects in estuaries, coastal, and continental shelf regions nationwide. Hydra data sets are large and complex in structure, and existing processing and editing tools consisted of fragments of MATLAB code written by USGS scientists to satisfy personal research needs. This code did not meet STG quality control criteria. This toolbox permits engineers and scientists to monitor data quality by: 1.\tprocessing data with interactive critical review;

  17. Bringing ATLAS production to HPC resources - A use case with the Hydra supercomputer of the Max Planck Society

    Science.gov (United States)

    Kennedy, J. A.; Kluth, S.; Mazzaferro, L.; Walker, Rodney

    2015-12-01

    The possible usage of HPC resources by ATLAS is now becoming viable due to the changing nature of these systems and it is also very attractive due to the need for increasing amounts of simulated data. In recent years the architecture of HPC systems has evolved, moving away from specialized monolithic systems, to a more generic linux type platform. This change means that the deployment of non HPC specific codes has become much easier. The timing of this evolution perfectly suits the needs of ATLAS and opens a new window of opportunity. The ATLAS experiment at CERN will begin a period of high luminosity data taking in 2015. This high luminosity phase will be accompanied by a need for increasing amounts of simulated data which is expected to exceed the capabilities of the current Grid infrastructure. ATLAS aims to address this need by opportunistically accessing resources such as cloud and HPC systems. This paper presents the results of a pilot project undertaken by ATLAS and the MPP/RZG to provide access to the HYDRA supercomputer facility. Hydra is the supercomputer of the Max Planck Society, it is a linux based supercomputer with over 80000 cores and 4000 physical nodes located at the RZG near Munich. This paper describes the work undertaken to integrate Hydra into the ATLAS production system by using the Nordugrid ARC-CE and other standard Grid components. The customization of these components and the strategies for HPC usage are discussed as well as possibilities for future directions.

  18. Hydra as a model organism to decipher the toxic effects of copper oxide nanorod: Eco-toxicogenomics approach

    Science.gov (United States)

    Murugadas, Anbazhagan; Zeeshan, Mohammed; Thamaraiselvi, Kaliannan; Ghaskadbi, Surendra; Akbarsha, Mohammad Abdulkader

    2016-07-01

    Nanotechnology has emerged as a powerful field of applied research. However, the potential toxicity of nano-materials is a cause of concern. A thorough toxicological investigation is required before a nanomaterial is evaluated for application of any kind. In this context, there is concerted effort to find appropriate test systems to assess the toxicity of nanomaterials. Toxicity of a nanomaterial greatly depends on its physicochemical properties and the biological system with which it interacts. The present research was carried out with a view to generate data on eco-toxicological impacts of copper oxide nanorod (CuO NR) in Hydra magnipapillata 105 at organismal, cellular and molecular levels. Exposure of hydra to CuO NR resulted in severe morphological alterations in a concentration- as well as duration-dependent manner. Impairment of feeding, population growth, and regeneration was also observed. In vivo and in vitro analyses revealed induction of oxidative stress, genotoxicity, and molecular machinery of apoptotic cell death, accompanied by disruption of cell cycle progression. Taken together, CuO nanorod is potentially toxic to the biological systems. Also, hydra offers potential to be used as a convenient model organism for aquatic ecotoxicological risk assessment of nanomaterials.

  19. Hydra as a model organism to decipher the toxic effects of copper oxide nanorod: Eco-toxicogenomics approach

    Science.gov (United States)

    Murugadas, Anbazhagan; Zeeshan, Mohammed; Thamaraiselvi, Kaliannan; Ghaskadbi, Surendra; Akbarsha, Mohammad Abdulkader

    2016-01-01

    Nanotechnology has emerged as a powerful field of applied research. However, the potential toxicity of nano-materials is a cause of concern. A thorough toxicological investigation is required before a nanomaterial is evaluated for application of any kind. In this context, there is concerted effort to find appropriate test systems to assess the toxicity of nanomaterials. Toxicity of a nanomaterial greatly depends on its physicochemical properties and the biological system with which it interacts. The present research was carried out with a view to generate data on eco-toxicological impacts of copper oxide nanorod (CuO NR) in Hydra magnipapillata 105 at organismal, cellular and molecular levels. Exposure of hydra to CuO NR resulted in severe morphological alterations in a concentration- as well as duration-dependent manner. Impairment of feeding, population growth, and regeneration was also observed. In vivo and in vitro analyses revealed induction of oxidative stress, genotoxicity, and molecular machinery of apoptotic cell death, accompanied by disruption of cell cycle progression. Taken together, CuO nanorod is potentially toxic to the biological systems. Also, hydra offers potential to be used as a convenient model organism for aquatic ecotoxicological risk assessment of nanomaterials. PMID:27417574

  20. Determination of Mercury in Ayurvedic Dietary Supplements That Are Not Rasa Shastra Using the Hydra-C Direct Mercury Analyzer

    Directory of Open Access Journals (Sweden)

    Amir A. Abdalla

    2013-01-01

    Full Text Available Mercury has been determined in Ayurvedic dietary supplements (Trifala, Trifala Guggulu, Turmeric, Mahasudarshan, Yograj, Shatawari, Hingwastika, Shatavari, and Shilajit by inductively coupled plasma-mass spectrometry (ICP-MS and direct mercury analysis using the Hydra-C direct mercury analyzer (Teledyne Leeman Labs Hudson, NH, USA. Similar results were obtained from the two methods, but the direct mercury analysis method was much faster and safer and required no microwave digestion (unlike ICP-MS. Levels of mercury ranged from 0.002 to 56 μg/g in samples of dietary supplements. Standard reference materials Ephedra 3240 and tomato leaves that were from the National Institute of Standard and Technology (NIST and dogfish liver (DOLT3 that was from the Canadian Research Council were analyzed using Hydra-C method. Average mercury recoveries were 102% (RSD% 0.0018, 100% (RSD% 0.0009, and 101% (RSD% 0.0729, respectively. Hydra-C method Limit Of Quantitation was 0.5 ng.

  1. HyDRA: gene prioritization via hybrid distance-score rank aggregation.

    Science.gov (United States)

    Kim, Minji; Farnoud, Farzad; Milenkovic, Olgica

    2015-04-01

    Gene prioritization refers to a family of computational techniques for inferring disease genes through a set of training genes and carefully chosen similarity criteria. Test genes are scored based on their average similarity to the training set, and the rankings of genes under various similarity criteria are aggregated via statistical methods. The contributions of our work are threefold: (i) first, based on the realization that there is no unique way to define an optimal aggregate for rankings, we investigate the predictive quality of a number of new aggregation methods and known fusion techniques from machine learning and social choice theory. Within this context, we quantify the influence of the number of training genes and similarity criteria on the diagnostic quality of the aggregate and perform in-depth cross-validation studies; (ii) second, we propose a new approach to genomic data aggregation, termed HyDRA (Hybrid Distance-score Rank Aggregation), which combines the advantages of score-based and combinatorial aggregation techniques. We also propose incorporating a new top-versus-bottom (TvB) weighting feature into the hybrid schemes. The TvB feature ensures that aggregates are more reliable at the top of the list, rather than at the bottom, since only top candidates are tested experimentally; (iii) third, we propose an iterative procedure for gene discovery that operates via successful augmentation of the set of training genes by genes discovered in previous rounds, checked for consistency. Fundamental results from social choice theory, political and computer sciences, and statistics have shown that there exists no consistent, fair and unique way to aggregate rankings. Instead, one has to decide on an aggregation approach using predefined set of desirable properties for the aggregate. The aggregation methods fall into two categories, score- and distance-based approaches, each of which has its own drawbacks and advantages. This work is motivated by the

  2. Hydra: software for tailored processing of H/D exchange data from MS or tandem MS analyses

    Directory of Open Access Journals (Sweden)

    Bennett Melissa

    2009-05-01

    Full Text Available Abstract Background Hydrogen/deuterium exchange mass spectrometry (H/DX-MS experiments implemented to characterize protein interaction and protein folding generate large quantities of data. Organizing, processing and visualizing data requires an automated solution, particularly when accommodating new tandem mass spectrometry modes for H/DX measurement. We sought to develop software that offers flexibility in defining workflows so as to support exploratory treatments of H/DX-MS data, with a particular focus on the analysis of very large protein systems and the mining of tandem mass spectrometry data. Results We present a software package ("Hydra" that supports both traditional and exploratory treatments of H/DX-MS data. Hydra's software architecture tolerates flexible data analysis procedures by allowing the addition of new algorithms without significant change to the underlying code base. Convenient user interfaces ease the organization of raw data files and input of peptide data. After executing a user-defined workflow, extracted deuterium incorporation values can be visualized in tabular and graphical formats. Hydra also automates the extraction and visualization of deuterium distribution values. Manual validation and assessment of results is aided by an interface that aligns extracted ion chromatograms and mass spectra, while providing a means of rapidly reprocessing the data following manual adjustment. A unique feature of Hydra is the automated processing of tandem mass spectrometry data, demonstrated on a large test data set in which 40,000 deuterium incorporation values were extracted from replicate analysis of approximately 1000 fragment ions in one hour using a typical PC. Conclusion The customizable workflows and user-friendly interfaces of Hydra removes a significant bottleneck in processing and visualizing H/DX-MS data and helps the researcher spend more time executing new experiments and interpreting results. This increased

  3. Proteomic screen in the simple metazoan Hydra identifies 14-3-3 binding proteins implicated in cellular metabolism, cytoskeletal organisation and Ca2+ signalling

    Directory of Open Access Journals (Sweden)

    Imhof Axel

    2007-07-01

    Full Text Available Abstract Background 14-3-3 proteins have been implicated in many signalling mechanisms due to their interaction with Ser/Thr phosphorylated target proteins. They are evolutionarily well conserved in eukaryotic organisms from single celled protozoans and unicellular algae to plants and humans. A diverse array of target proteins has been found in higher plants and in human cell lines including proteins involved in cellular metabolism, apoptosis, cytoskeletal organisation, secretion and Ca2+ signalling. Results We found that the simple metazoan Hydra has four 14-3-3 isoforms. In order to investigate whether the diversity of 14-3-3 target proteins is also conserved over the whole animal kingdom we isolated 14-3-3 binding proteins from Hydra vulgaris using a 14-3-3-affinity column. We identified 23 proteins that covered most of the above-mentioned groups. We also isolated several novel 14-3-3 binding proteins and the Hydra specific secreted fascin-domain-containing protein PPOD. In addition, we demonstrated that one of the 14-3-3 isoforms, 14-3-3 HyA, interacts with one Hydra-Bcl-2 like protein in vitro. Conclusion Our results indicate that 14-3-3 proteins have been ubiquitous signalling components since the start of metazoan evolution. We also discuss the possibility that they are involved in the regulation of cell numbers in response to food supply in Hydra.

  4. Hydratools, a MATLAB® based data processing package for Sontek Hydra data

    Science.gov (United States)

    Martini, M.; Lightsom, F.L.; Sherwood, C.R.; Xu, Jie; Lacy, J.R.; Ramsey, A.; Horwitz, R.

    2005-01-01

    The U.S. Geological Survey (USGS) has developed a set of MATLAB tools to process and convert data collected by Sontek Hydra instruments to netCDF, which is a format used by the USGS to process and archive oceanographic time-series data. The USGS makes high-resolution current measurements within 1.5 meters of the bottom. These data are used in combination with other instrument data from sediment transport studies to develop sediment transport models. Instrument manufacturers provide software which outputs unique binary data formats. Multiple data formats are cumbersome. The USGS solution is to translate data streams into a common data format: netCDF. The Hydratools toolbox is written to create netCDF format files following EPIC conventions, complete with embedded metadata. Data are accepted from both the ADV and the PCADP. The toolbox will detect and remove bad data, substitute other sources of heading and tilt measurements if necessary, apply ambiguity corrections, calculate statistics, return information about data quality, and organize metadata. Standardized processing and archiving makes these data more easily and routinely accessible locally and over the Internet. In addition, documentation of the techniques used in the toolbox provides a baseline reference for others utilizing the data.

  5. Suzaku observations of the Hydra A cluster out to the virial radius

    CERN Document Server

    Sato, Takuya; Matsushita, Kyoko; Sakuma, Eri; Sato, Kosuke; Fujita, Yutaka; Okabe, Nobuhiro; Fukazawa, Yasushi; Ichikawa, Kazuya; Kawaharada, Madoka; Nakazawa, Kazuhiro; Ohashi, Takaya; Ota, Naomi; Takizawa, Motokazu; Tamura, Takayuki

    2012-01-01

    We report Suzaku observations of the northern half of the Hydra A cluster out to ~1.4 Mpc, reaching the virial radius. This is the first Suzaku observations of a medium size (kT ~3 keV) cluster out to the virial radius. Two observations were conducted, north-west and north-east offsets, which continue into a filament and a void of the large-scale structure of the Universe, respectively. The X-ray emission and distribution of galaxies elongate towards the filament. The temperature profiles toward the two directions are mostly consistent within error bars and drop to 1.5 keV at 1.5r_500. As observed by Suzaku in hot clusters, the entropy profile becomes flatter beyond r_500 and disagrees with the r^1.1 relation that is expected from accretion shock-heating models. When scaled with average intracluster medium (ICM) temperature, the entropy profiles of clusters observed with Suzaku are universal without dependence on system mass. The hydrostatic mass values toward the void and the filament agree well, and the Nav...

  6. DISCOVERY OF A DISK GAP CANDIDATE AT 20 AU IN TW HYDRAE

    Energy Technology Data Exchange (ETDEWEB)

    Akiyama, E.; Kusakabe, N.; Kandori, R. [National Astronomical Observatory of Japan, 2-21-1, Osawa, Mitaka, Tokyo 181-8588 (Japan); Muto, T. [Division of Liberal Arts, Kogakuin University, 1-24-2, Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-8677 (Japan); Kataoka, A.; Kuzuhara, M. [Department of Earth and Planetary Sciences, Tokyo Institute of Technology, 2-12-1, Oklahoma, Ookayama, Meguro-ko, Tokyo 152-8551 (Japan); Hashimoto, J.; Wisniewski, J. [Department of Physics and Astronomy, The University of Oklahoma, 440 W. Brooks Street, Norman, OK 73019 (United States); Tsukagoshi, T. [College of Science, Ibaraki University, 2-1-1, Bunkyo, Mito, Ibaraki 310-8512 (Japan); Kwon, J. [Department of Astronomy, Graduate School of Science, The University of Tokyo, 7-3-1, Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan); Kudo, T.; Currie, T. [Subaru Telescope, National Astronomical Observatory of Japan, 650, North A' ohoku Place, Hilo, HI 96720 (United States); Grady, C. A. [Eureka Scientific, 2452 Delmer, Suite 100, Oakland, CA 96002 (United States); Takami, M. [Institute of Astronomy and Astrophysics, Academia Sinica, P.O. Box 23-141, Taipei 10617, Taiwan (China); Janson, M. [Department of Astronomy, Stockholm University, AlbaNova University Center, Stockholm, SE-106 91 (Sweden); Henning, T.; Carson, J. C. [Max Planck Institute for Astronomy, Königstuhl 17, D-69117 Heidelberg (Germany); Sitko, M. L. [Space Science Institute, 4750 Walnut Street, Suite 205, Boulder, CO 80301 (United States); Mayama, S. [The Center for the Promotion of Integrated Sciences, The Graduate University for Advance Studies, Shonan International Village, Hayama-cho, Miura-gun, Kanagawa 240-0115 (Japan); Thalmann, C., E-mail: eiji.akiyama@nao.ac.jp [Institute for Astronomy, ETH Zurich, Wolfgang-Pauli-Strasse 27, CH-8093 Zurich (Switzerland); and others

    2015-04-01

    We present a new Subaru/HiCIAO high-contrast H-band polarized intensity (PI) image of a nearby transitional disk associated with TW Hydrae. The scattered light from the disk was detected from 0.″ 2 to 1.″ 5 (11–81 AU) and the PI image shows a clear axisymmetric depression in PI at ∼0.″ 4 (∼20 AU) from the central star, similar to the ∼80 AU gap previously reported from Hubble Space Telescope images. The azimuthal PI profile also shows that the disk beyond 0.″ 2 is almost axisymmetric. We discuss two possible scenarios explaining the origin of the PI depression: (1) a gap structure may exist at ∼20 AU from the central star because of a shallow slope seen in the PI profile, and (2) grain growth may be occurring in the inner region of the disk. Multi-band observations at near-infrared and millimeter/submillimeter wavelengths play a complementary role in investigating dust opacity and may help reveal the origin of the gap more precisely.

  7. Bringing ATLAS production to HPC resources. A case study with SuperMuc and Hydra

    Energy Technology Data Exchange (ETDEWEB)

    Duckeck, Guenter; Walker, Rodney [LMU Muenchen (Germany); Kennedy, John; Mazzaferro, Luca [RZG Garching (Germany); Kluth, Stefan [Max-Planck-Institut fuer Physik, Muenchen (Germany); Collaboration: ATLAS-Collaboration

    2015-07-01

    The possible usage of Supercomputer systems or HPC resources by ATLAS is now becoming viable due to the changing nature of these systems and it is also very attractive due to the need for increasing amounts of simulated data. The ATLAS experiment at CERN will begin a period of high luminosity data taking in 2015. The corresponding need for simulated data might potentially exceed the capabilities of the current Grid infrastructure. ATLAS aims to address this need by opportunistically accessing resources such as cloud and HPC systems. This contribution presents the results of two projects undertaken by LMU/LRZ and MPP/RZG to use the supercomputer facilities SuperMuc (LRZ) and Hydra (RZG). Both are Linux based supercomputers in the 100 k CPU-core category. The integration of such HPC resources into the ATLAS production system poses many challenges. Firstly, established techniques and features of standard WLCG operation are prohibited or much restricted on HPC systems, e.g. Grid middleware, software installation, outside connectivity, etc. Secondly, efficient use of available resources requires massive multi-core jobs, back-fill submission and check-pointing. We discuss the customization of these components and the strategies for HPC usage as well as possibilities for future directions.

  8. [Morpho-functional characteristics of the lingual epithelium after administration of hydra peptide morphogen].

    Science.gov (United States)

    Kulaeva, V V; Bykov, V L

    2007-01-01

    Using histological, morphometric and quantitative histoenzymological methods, the changes of lingual epithelium were studied in 40 outbred albino mice after 5 intraperitoneal injections of 100 micrograms of hydra peptide morphogen (HPM) per 1 kg of body weight. Administration of HPM was found to increase the total thickness of epithelial layer on the dorsal tongue surface in the interpapillary regions, while in the area of filiform papillae these changes were not significant. On the ventral tongue surface HPM induced a marked increase of total thickness of the epithelial layer as compared to that in control animals. Mitotic activity was increased in the epithelium covering the ventral surface and in the interpapillary regions on the dorsal tongue surface. Histoenzymologic study which involved the demonstration of NADH-diaphorase, succinate- and lactate-dehydrogenase (LDH) activities, followed by a cytophotometric evaluation of enzyme activity, has shown a stimulatory effect of HPM on the activity of all the enzymes studied, which was most pronounced in respect to LDH and was maximally expressed on the dorsal tongue surface. These findings collectively suggest that HPM exerts a stimulatory effect on proliferation activity and metabolism of lingual epithelium, which is differentially expressed in its variuoe topographical zones.

  9. Discovery of a Disk Gap Candidate at 20 AU in TW Hydrae

    CERN Document Server

    Akiyama, E; Kusakabe, N; Kataoka, A; Hashimoto, J; Tuskagoshi, T; Kwon, J; Kudo, T; Kandori, R; Grady, C A; Takami, M; Janson, M; Kuzuhara, M; Henning, T; Sitko, M L; Mayama, J C Carson S; Currie, T; Thalmann, C; Wisniewski, J; Momose, M; Ohashi, N; Abe, L; Brandner, W; Brandt, T D; Egner, S; Feldt, M; Goto, M; Guyon, O; Hayano, Y; Hayashi, M; Hayashi, S; Hodapp, K W; Ishi, M; Iye, M; Knapp, G R; Matsuo, T; McElwain, M W; Miyama, S; Morino, J -I; Moro-Martin, A; Nishimura, T; Pyo, T -S; Serabyn, G; Suenaga, T; Suto, H; Suzuki, R; Takahashi, Y H; Takato, N; Terada, H; Tomono, D; Turner, E L; Watanabe, M; Yamada, T; Takami, H; Usuda, T; Tamura, M

    2015-01-01

    We present a new Subaru/HiCIAO high-contrast H-band polarized intensity (PI) image of a nearby transitional disk associated with TW Hydrae. The scattered light from the disk was detected from 0.2" to 1.5" (11 - 81 AU) and the PI image shows a clear axisymmetric depression in polarized intensity at ~ 0.4" (~ 20 AU) from the central star, similar to the ~ 80 AU gap previously reported from HST images. Azimuthal polarized intensity profile also shows the disk beyond 0.2" is almost axisymmetric. We discuss two possible scenarios explaining the origin of the polarized intensity depression: 1) a gap structure may exist at ~ 20 AU from the central star because of shallow slope seen in the polarized intensity profile, and 2) grain growth may be occurring in the inner region of the disk. Multi-band observations at NIR and millimeter/sub-millimeter wavelengths play a complementary role in investigating dust opacity and may help reveal the origin of the gap more precisely.

  10. BVRI Photometric and Polarimetric studies of W UMa type Eclipsing Binary FO Hydra

    CERN Document Server

    Prasad, Vinod; Patel, Manoj K; Srivastava, D C

    2012-01-01

    We present analysis of optical photometric and polarimetric observations of contact binary system FO Hydra (FO Hya). The computed period of the system is 0.469556+/-0.000003 days. An O-C curve analysis indicates an increase in its period by 5.77x10^{-8} day yr^{-1}. The photometric light curves are analyzed using Wilson-Devinney code (WD). The present analysis shows that FO Hya is a B-subtype of W UMa type contact binary. The radii and mass of primary and secondary components are found, respectively, to be R_1 = 1.62+/-0.03 R_sun and R_2 = 0.91+/-0.02 R_sun, and M_1 = 1.31+/-0.07 M_sun and M_2 = 0.31+/-0.11 M_sun. The light curve shape shows small asymmetries around the primary and secondary maxima. This may be due to the presence of dark spots on the components. The polarimetric observations yield average values of its polarization to be 0.18+/-0.03, 0.15+/-0.03, 0.17+/-0.02 and 0.15+/-0.02 per cent in B, V, R and I bands, respectively. These values are appreciably lower than the typical polarization of W UM...

  11. A textbook example of ram-pressure stripping in the Hydra A/A780 cluster

    Science.gov (United States)

    De Grandi, S.; Eckert, D.; Molendi, S.; Girardi, M.; Roediger, E.; Gaspari, M.; Gastaldello, F.; Ghizzardi, S.; Nonino, M.; Rossetti, M.

    2016-08-01

    In the current epoch, one of the main mechanisms driving the growth of galaxy clusters is the continuous accretion of group-scale halos. In this process, the ram pressure applied by the hot intracluster medium on the gas content of the infalling group is responsible for stripping the gas from its dark-matter halo, which gradually leads to the virialisation of the infalling gas in the potential well of the main cluster. Using deep wide-field observations of the poor cluster Hydra A/A780 with XMM-Newton and Suzaku, we report on the discovery of an infalling galaxy group 1.1 Mpc south of the cluster core. The presence of a substructure is confirmed by a dynamical study of the galaxies in this region. A wake of stripped gas is trailing behind the group over a projected scale of 760 kpc. The temperature of the gas along the wake is constant at kT ~ 1.3 keV, which is about a factor of two less than the temperature of the surrounding plasma. We observe a cold front pointing westwards compared to the peak of the group, which indicates that the group is currently not moving in the direction of the main cluster, but is moving along an almost circular orbit. The overall morphology of the group bears remarkable similarities with high-resolution numerical simulations of such structures, which greatly strengthens our understanding of the ram-pressure stripping process.

  12. The Hydra I cluster core. I. Stellar populations in the cD galaxy NGC 3311

    CERN Document Server

    Barbosa, Carlos Eduardo; Coccato, Lodovico; Hilker, Michael; de Oliveira, Cláudia Mendes; Richtler, Tom

    2016-01-01

    (Abridged for arXiv) The history of the mass assembly of brightest cluster galaxies may be studied by the mapping the stellar populations at large radial distances from the galaxy centre. We provide extended and robust measurements of the stellar population parameters in NGC 3311, the cD galaxy at the centre of the Hydra I cluster and out to three effective radii. Using seven absorption-features defined in the Lick/IDS system and single stellar populations models, we obtained luminosity-weighted ages, metallicities and alpha element abundances. The trends in the Lick indices and the distribution of the stellar population parameters indicate that the stars of NGC 3311 may be divided into two radial regimes, one within and the another beyond one effective radius, $R_e = 8.4$ kpc, similar to the distinction between inner galaxy and external halo derived from the NGC 3311 velocity dispersion profile. The inner galaxy ($R\\leq R_e$) is old (age $\\sim 14$ Gyr), have negative metallicity gradients and positive alpha ...

  13. Fluorescent nanocrystals reveal regulated portals of entry into and between the cells of Hydra.

    Directory of Open Access Journals (Sweden)

    Claudia Tortiglione

    Full Text Available Initially viewed as innovative carriers for biomedical applications, with unique photophysical properties and great versatility to be decorated at their surface with suitable molecules, nanoparticles can also play active roles in mediating biological effects, suggesting the need to deeply investigate the mechanisms underlying cell-nanoparticle interaction and to identify the molecular players. Here we show that the cell uptake of fluorescent CdSe/CdS quantum rods (QRs by Hydra vulgaris, a simple model organism at the base of metazoan evolution, can be tuned by modifying nanoparticle surface charge. At acidic pH, amino-PEG coated QRs, showing positive surface charge, are actively internalized by tentacle and body ectodermal cells, while negatively charged nanoparticles are not uptaken. In order to identify the molecular factors underlying QR uptake at acidic pH, we provide functional evidence of annexins involvement and explain the QR uptake as the combined result of QR positive charge and annexin membrane insertion. Moreover, tracking QR labelled cells during development and regeneration allowed us to uncover novel intercellular trafficking and cell dynamics underlying the remarkable plasticity of this ancient organism.

  14. Fluctuations and symmetry breaking during regeneration of Hydra vulgaris tissue toroids

    CERN Document Server

    Krahe, Michael; Lin, Kao-Nung; Fischer, Julia; Fütterer, Claus

    2012-01-01

    While much is known in single cell mechanics, the mechanics of regeneration of naturally grown tissues and cell assemblies is largely unexplored. We found a symmetry breaking scenario accompanied by shape fluctuations in dissected regenerating Hydra vulgaris tissue tori. A subsequent folding and merging process leads finally to a regenerating spheroid. These phenomena are related to the dynamics of fluorescent beta- and trans-cellular alpha-actin structures. By embedding the tissues in a hydro-gel the fluctuations could be studied over a longer period of time. The power spectrum of the torus-fluctuations shows a non-trivial energy distribution dynamics depending on the gel stiffness. During the transition, many higher modes where found but in the end the 2nd mode wins in most cases. The toroid builds up an uniform alpha-actin ring along the inner edge of the torus. We found this ring in the inner cellular layer to be responsible for the force generation destabilizing the toroid shape. This actin structure is ...

  15. A textbook example of ram-pressure stripping in the Hydra A/A780 cluster

    CERN Document Server

    De Grandi, S; Molendi, S; Girardi, M; Roediger, E; Gaspari, M; Gastaldello, F; Ghizzardi, S; Nonino, M; Rossetti, M

    2016-01-01

    In the current epoch, one of the main mechanisms driving the growth of galaxy clusters is the continuous accretion of group-scale halos. In this process, the ram pressure applied by the hot intracluster medium on the gas content of the infalling group is responsible for stripping the gas from its dark-matter halo, which gradually leads to the virialization of the infalling gas in the potential well of the main cluster. Using deep wide-field observations of the poor cluster Hydra A/A780 with XMM-Newton and Suzaku, we report the discovery of an infalling galaxy group 1.1 Mpc south of the cluster core. The presence of a substructure is confirmed by a dynamical study of the galaxies in this region. A wake of stripped gas is trailing behind the group over a projected scale of 760 kpc. The temperature of the gas along the wake is constant at kT ~ 1.3 keV, which is about a factor of two less than the temperature of the surrounding plasma. We observe a cold front pointing westwards compared to the peak of the group, ...

  16. Cold gas dynamics in Hydra-A: evidence for a rotating disk

    CERN Document Server

    Hamer, S L; Swinbank, A M; Oonk, J B R; Mittal, R; McNamara, B R; Russell, H R; Bremer, M N; Combes, F; Fabian, A C; Nesvadba, N P H; O'Dea, C P; Baum, S A; Salomé, P; Tremblay, G; Donahue, M; Ferland, G J; Sarazin, C L

    2013-01-01

    We present multi-frequency observations of the radio galaxy Hydra-A (3C218) located in the core of a massive, X-ray luminous galaxy cluster. IFU spectroscopy is used to trace the kinematics of the ionised and warm molecular hydrogen which are consistent with a ~ 5 kpc rotating disc. Broad, double-peaked lines of CO(2-1), [CII]157 $\\mu$m and [OI]63 $\\mu$m are detected. We estimate the mass of the cold gas within the disc to be M$_{gas}$ = 2.3 $\\pm$ 0.3 x 10$^9$ M$_{\\odot}$. These observations demonstrate that the complex line profiles found in the cold atomic and molecular gas are related to the rotating disc or ring of gas. Finally, an HST image of the galaxy shows that this gas disc contains a substantial mass of dust. The large gas mass, SFR and kinematics are consistent with the levels of gas cooling from the ICM. We conclude that the cold gas originates from the continual quiescent accumulation of cooled ICM gas. The rotation is in a plane perpendicular to the projected orientation of the radio jets and I...

  17. Comparative analysis of septic injury-inducible genes in phylogenetically distant model organisms of regeneration and stem cell research, the planarian Schmidtea mediterranea and the cnidarian Hydra vulgaris

    Directory of Open Access Journals (Sweden)

    Vilcinskas Andreas

    2008-04-01

    Full Text Available Abstract Background The planarian Schmidtea mediterranea and the cnidarian Hydra vulgaris have emerged as valuable model organisms in regeneration and stem cell research because of their prominent ability to regenerate a complete organism from any small body fragment. Under natural conditions wounding may result from predator attacks. These injuries open their innermost to a wide array of microbes present in the environment. Therefore, we established the hypothesis that regeneration processes may be linked to or at least accompanied by innate immune responses. In order to screen for septic wounding inducible genes we dissected individuals using a scalpel in the presence of a crude bacterial lipopolysaccharide preparation that is commonly used to elicit innate immune responses in animals and applied the suppression subtractive hybridization technique that selectively amplifies cDNAs of differentially expressed genes. Results This analysis revealed the induced expression of 27 genes in immune challenged Schmidtea and 35 genes in immune challenged Hydra. Identified genes from both animals encode proteins that share sequence similarities with potential homologues from other organisms known to be involved in signaling (e.g. calreticulin in Schmidtea and major vault protein in Hydra, stress responses (e.g. Hsp20 in Schmidtea and a PRP19/PSO4 DNA repair protein in Hydra, or to represent potential antimicrobial effectors (e.g. perforin-like protein in Schmidtea and PR-1-like protein and neutrophil cytosolic factor 1 in Hydra. As expected, septic wounding also induces expression of genes in Schmidtea and Hydra potentially involved in tissue remodeling associated with regeneration processes (e.g. matrix metalloproteinase in Schmidtea and a potential von Willebrand factor in Hydra. Conclusion We identified numerous immune-inducible genes in Hydra and Schmidtea that show a similar distribution corresponding to their physiological roles, although lineages of

  18. Coordinated modulation of cellular signaling through ligand-gated ion channels in Hydra vulgaris (Cnidaria, Hydrozoa).

    Science.gov (United States)

    Pierobon, Paola

    2012-01-01

    Cnidarians lack well developed organs, but they have evolved the molecular and cellular components needed to assemble a nervous system. The apparent 'simplicity' of the cnidarian nervous net does not occur at the cellular level, but rather in the organisation of conducting systems. Cnidarian neurons are in fact electrically excitable, show the typical extended morphology and are connected by chemical synapses or gap junctions. They have been regarded as peptidergic, given the wealth of neuropeptides generally distributed along neurites and in cell bodies, supporting the hypothesis of a modulatory role in neurotransmission. However, the presence of clear-cored, as well as dense-cored synaptic vesicles in cnidarian neurons suggests both fast and slow synaptic transmission mechanisms. In fact, biochemical and functional evidence indicates that classical neurotransmitters and their metabolic partners are present in cnidarian tissues, where they are involved in coordinating motility and behavior. We have identified and characterized in Hydra tissues receptors to the inhibitory and excitatory amino acid neurotransmitters, GABA, glycine and NMDA, that are similar to mammalian ionotropic receptors in terms of their biochemical and pharmacological properties. These receptors appear to regulate pacemaker activities and their physiological correlates; in the live animal, they also affect feeding behavior, namely the duration and termination of the response elicited by reduced glutathione, with opposite actions of GABA and glycine or NMDA, respectively. These results suggest that modulation of cellular signaling through ligand-gated-ion channels is an ancient characteristic in the animal kingdom, and that the pharmacological properties of these receptors have been highly conserved during evolution.

  19. Molecular cloning, sequence analysis, prokaryotic expression, and function prediction of foot-specific peroxidase in Hydra magnipapillata Chinese strain.

    Science.gov (United States)

    Pan, H C; Yang, H Q; Zhao, F X; Qian, X C

    2014-08-28

    The cDNA sequence of foot-specific peroxidase PPOD1 from the Chinese strain of Hydra magnipapillata was cloned by reverse transcription-polymerase chain reaction. The cDNA sequence contained a coding region with an 873-bp open reading frame, a 31-bp 5'-untranslated region, and a 36-bp 3'-untranslated region. The structure prediction results showed that PPOD1 contains 10.34% of α-helix, 38.62% of extended strand, 12.41% of β-turn, and 38.62% of random coil. The structural core was α-helix at the N terminus. The GenBank protein blast server showed that PPOD1 contains 2 fascin-like domains. In addition, high-level PPOD1 activity was only present in the ectodermal epithelial cells located on the edge of the adhesive face of the basal disc, and that these cells extended lamellipodia and filopodia when the basal disc was tightly attached to a glass slide. The fascin-like domains of Hydra PPOD1 might contribute to the bundling of the actin filament of these cells, and hence, the formation of filopodia. In conclusion, these cells might play an important role in strengthening the adsorbability of the basal disc to substrates.

  20. Loss of neurogenesis in Hydra leads to compensatory regulation of neurogenic and neurotransmission genes in epithelial cells.

    Science.gov (United States)

    Wenger, Y; Buzgariu, W; Galliot, B

    2016-01-05

    Hydra continuously differentiates a sophisticated nervous system made of mechanosensory cells (nematocytes) and sensory-motor and ganglionic neurons from interstitial stem cells. However, this dynamic adult neurogenesis is dispensable for morphogenesis. Indeed animals depleted of their interstitial stem cells and interstitial progenitors lose their active behaviours but maintain their developmental fitness, and regenerate and bud when force-fed. To characterize the impact of the loss of neurogenesis in Hydra, we first performed transcriptomic profiling at five positions along the body axis. We found neurogenic genes predominantly expressed along the central body column, which contains stem cells and progenitors, and neurotransmission genes predominantly expressed at the extremities, where the nervous system is dense. Next, we performed transcriptomics on animals depleted of their interstitial cells by hydroxyurea, colchicine or heat-shock treatment. By crossing these results with cell-type-specific transcriptomics, we identified epithelial genes up-regulated upon loss of neurogenesis: transcription factors (Dlx, Dlx1, DMBX1/Manacle, Ets1, Gli3, KLF11, LMX1A, ZNF436, Shox1), epitheliopeptides (Arminins, PW peptide), neurosignalling components (CAMK1D, DDCl2, Inx1), ligand-ion channel receptors (CHRNA1, NaC7), G-Protein Coupled Receptors and FMRFRL. Hence epitheliomuscular cells seemingly enhance their sensing ability when neurogenesis is compromised. This unsuspected plasticity might reflect the extended multifunctionality of epithelial-like cells in early eumetazoan evolution.

  1. Genome-wide screening reveals the emergence and divergence of RTK homologues in basal Metazoan Hydra magnipapillata

    Indian Academy of Sciences (India)

    P C Reddy; Salil S Bidaye; Surendra Ghaskadbi

    2011-06-01

    Receptor tyrosine kinases (RTKs) are key components of cell–cell signalling required for growth and development of multicellular organisms. It is therefore likely that the divergence of RTKs and associated components played a significant role in the evolution of multicellular organisms. We have carried out the present study in hydra, a diploblast, to investigate the divergence of RTKs after parazoa and before emergence of triploblast phyla. The domain-based screening using Hidden Markov Models (HMMs) for RTKs in Genomescan predicted gene models of the Hydra magnipapillata genome resulted in identification of 15 RTKs. These RTKs have been classified into eight families based on domain architecture and homology. Only 5 of these RTKs have been previously reported and a few of these have been partially characterized. A phylogeny-based analysis of these predicted RTKs revealed that seven subtype duplications occurred between `parazoan–eumetazoan split’ and `diploblast–triploblast split’ in animal phyla. These results suggest that most of the RTKs evolved before the radiata–bilateria divergence during animal evolution.

  2. A Multi-Year Plan for Enhancing Turbulence Modeling in Hydra-TH Revised and Updated Version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Thomas M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Berndt, Markus [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Baglietto, Emilio [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Magolan, Ben [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2015-10-01

    The purpose of this report is to document a multi-year plan for enhancing turbulence modeling in Hydra-TH for the Consortium for Advanced Simulation of Light Water Reactors (CASL) program. Hydra-TH is being developed to the meet the high- fidelity, high-Reynolds number CFD based thermal hydraulic simulation needs of the program. This work is being conducted within the thermal hydraulics methods (THM) focus area. This report is an extension of THM CASL milestone L3:THM.CFD.P10.02 [33] (March, 2015) and picks up where it left off. It will also serve to meet the requirements of CASL THM level three milestone, L3:THM.CFD.P11.04, scheduled for completion September 30, 2015. The objectives of this plan will be met by: maturation of recently added turbulence models, strategic design/development of new models and systematic and rigorous testing of existing and new models and model extensions. While multi-phase turbulent flow simulations are important to the program, only single-phase modeling will be considered in this report. Large Eddy Simulation (LES) is also an important modeling methodology. However, at least in the first year, the focus is on steady-state Reynolds Averaged Navier-Stokes (RANS) turbulence modeling.

  3. New members of the TW Hydrae Association and two accreting M-dwarfs in Scorpius-Centaurus

    CERN Document Server

    Murphy, Simon J; Bento, Joao

    2015-01-01

    We report the serendipitous discovery of several young mid-M stars found during a search for new members of the 30-40 Myr-old Octans Association. Only one of the stars may be considered a possible Octans(-Near) member. However, two stars have proper motions, kinematic distances, radial velocities, photometry and Li I 6708AA measurements consistent with membership in the 8-10 Myr-old TW Hydrae Association. Another may be an outlying member of TW Hydrae but has a velocity similar to that predicted by membership in Octans. We also identify two new lithium-rich members of the neighbouring Scorpius-Centaurus OB Association (Sco-Cen). Both exhibit large 12 and 22 micron excesses and strong, variable H-alpha emission which we attribute to accretion from circumstellar discs. Such stars are thought to be incredibly rare at the ~16 Myr median age of Sco-Cen and they join only one other confirmed M-type and three higher-mass accretors outside of Upper Scorpius. The serendipitous discovery of two accreting stars hosting ...

  4. Transitioning from microbiome composition to microbial community interactions: the potential of the metaorganism Hydra as an experimental model

    Directory of Open Access Journals (Sweden)

    Peter Deines

    2016-10-01

    Full Text Available Animals are home to complex microbial communities, which are shaped through interactions within the community, interactions with the host, and through environmental factors. The advent of high-throughput sequencing methods has led to novel insights in changing patterns of community composition and structure. However, deciphering the different types of interactions among community members, with their hosts and their interplay with their environment is still a challenge of major proportion. The emerging fields of synthetic microbial ecology and community systems biology have the potential to decrypt these complex relationships. Studying host-associated microbiota across multiple spatial and temporal scales will bridge the gap between individual microorganism studies and large-scale whole community surveys. Here, we discuss the unique potential of Hydra as an emerging experimental model in microbiome research. Through in vivo, in vitro, and in silico approaches the interaction structure of host-associated microbial communities and the effects of the host on the microbiota and its interactions can be disentangled. Research in the model system Hydra can unify disciplines from molecular genetics to ecology, opening up the opportunity to discover fundamental rules that govern microbiome community stability.

  5. Immagine della crisi / Crisi dell'immagine. Critica all'egemonia culturale del realismo e diritto all'opacità in Hydra Decapita (2011, un film saggio di The Otolith Group

    Directory of Open Access Journals (Sweden)

    Beatrice Ferrara

    2015-12-01

    Full Text Available This article reflects on the ways in which the relation between crisis and imaginary is articulated in Hydra Decapita, a 2011 essay-film by the British art collective The Otolith Group. Hydra Decapita is an imaged-based reflection arguing for the biopolitical character of the global economic crisis erupted in 2008 and of its representations in the media. By deploying a Cultural Studies-oriented interdisciplinary approach to the artwork – drawing its methodology from visual studies, critical theory and post-colonial studies – the article interrogates the limits and potentialities of Hydra Decapita’s conceptual kernel and aesthetic language.

  6. The Hydra I cluster core. I. Stellar populations in the cD galaxy NGC 3311

    Science.gov (United States)

    Barbosa, C. E.; Arnaboldi, M.; Coccato, L.; Hilker, M.; Mendes de Oliveira, C.; Richtler, T.

    2016-05-01

    Context. The history of the mass assembly of brightest cluster galaxies may be studied by mapping the stellar populations at large radial distances from the galaxy centre, where the dynamical times are long and preserve the chemodynamical signatures of the accretion events. Aims: We provide extended and robust measurements of the stellar population parameters in NGC 3311, the cD galaxy at the centre of the Hydra I cluster, and out to three effective radii. We wish to characterize the processes that drove the build-up of the stellar light at all these radii. Methods: We obtained the spectra from several regions in NGC 3311 covering an area of ~3 arcmin2 in the wavelength range 4800 ≲ λ(Å) ≲ 5800, using the FORS2 spectrograph at the Very Large Telescope in the MXU mode. We measured the equivalent widths of seven absorption-features defined in the Lick/IDS system, which were modelled by single stellar populations, to provide luminosity-weighted ages, metallicities, and alpha element abundances. Results: The trends in the Lick indices and the distribution of the stellar population parameters indicate that the stars of NGC 3311 may be divided in two radial regimes, one within and the another beyond one effective radius, Re = 8.4 kpc, similar to the distinction between the inner galaxy and the external halo derived from the NGC 3311 velocity dispersion profile. The inner galaxy (R ≤ Re) is old (age ~14 Gyr), has negative metallicity gradients and positive alpha element gradients. The external halo is also very old, but has a negative age gradient. The metal and element abundances of the external halo both have a large scatter, indicating that stars from a variety of satellites with different masses have been accreted. The region in the extended halo associated with the off-centred envelope at 0°parent galaxies, either disks with truncated star formation, or the outer regions of early-type galaxies. Late mass accretion at large radii is now coming from the tidal

  7. An orbital period investigation of the Algol-type eclipsing binary VW Hydrae

    Institute of Scientific and Technical Information of China (English)

    Jia Zhang; Sheng-Bang Qian; Boonrucksar Soonthornthum

    2009-01-01

    Orbital period variations of the Algol-type eclipsing binary, VW Hydrae, are analyzed based on one newly determined eclipse time and the other times of light minima collected from the literature. It is discovered that the orbital period shows a continuous increase at a rate of dP/dt = +6.34×10-7 d yr-1 while it undergoes a cyclic change with an amplitude of 0.0639 d and a period of 51.5 yr. After the long-term period increase and the large-amphtude period oscillation were subtracted from the O-C curve, the residuals of the photoelectric and CCD data indicate a small-amplitude cyclic variation with a period of 8.75 yr and a small amplitude of 0.0048d. The continuous period increase indicates a conservative mass transfer at a rate of dM2/dt = 7.89×10-8 M⊙ yr-1 from the secondary to the primary. The period increase may be caused by a combination of the mass transfer from the secondary to the primary and the angular momentum transfer from the binary system to the circumbinary disk. The two cyclic period oscillations can be explained by light-travel time effects via the presence of additional bodies. The small-amplitude periodic change indicates the existence of a less massive component with mass M3 > 0.53 M⊙, while the large-amplitude one is caused by the presence of a more massive component with mass M4 > 2.84 M⊙. The ultraviolet source in the system reported by Kviz & Rufener (1987) may be one of the additional components, and it is possible that the more massive one may be an unseen neutron star or black hole. The rapid period increase and the possibility of the presence of two additional components in the binary make it a very interesting system to study. New photometric and high-resolution spectroscopic observations and a detailed investigation of those data are required in the future.

  8. Constraints on the gamma-ray emission from the cluster-scale AGN outburst in the Hydra A galaxy cluster

    Science.gov (United States)

    HESS Collaboration; Abramowski, A.; Acero, F.; Aharonian, F.; Akhperjanian, A. G.; Anton, G.; Balenderan, S.; Balzer, A.; Barnacka, A.; Becherini, Y.; Becker, J.; Bernlöhr, K.; Birsin, E.; Biteau, J.; Bochow, A.; Boisson, C.; Bolmont, J.; Bordas, P.; Brucker, J.; Brun, F.; Brun, P.; Bulik, T.; Büsching, I.; Carrigan, S.; Casanova, S.; Cerruti, M.; Chadwick, P. M.; Charbonnier, A.; Chaves, R. C. G.; Cheesebrough, A.; Cologna, G.; Conrad, J.; Couturier, C.; Daniel, M. K.; Davids, I. D.; Degrange, B.; Deil, C.; Dickinson, H. J.; Djannati-Ataï, A.; Domainko, W.; O'C. Drury, L.; Dubus, G.; Dutson, K.; Dyks, J.; Dyrda, M.; Egberts, K.; Eger, P.; Espigat, P.; Fallon, L.; Fegan, S.; Feinstein, F.; Fernandes, M. V.; Fiasson, A.; Fontaine, G.; Förster, A.; Füßling, M.; Gajdus, M.; Gallant, Y. A.; Garrigoux, T.; Gast, H.; Gérard, L.; Giebels, B.; Glicenstein, J. F.; Glück, B.; Göring, D.; Grondin, M.-H.; Häffner, S.; Hague, J. D.; Hahn, J.; Hampf, D.; Harris, J.; Hauser, M.; Heinz, S.; Heinzelmann, G.; Henri, G.; Hermann, G.; Hillert, A.; Hinton, J. A.; Hofmann, W.; Hofverberg, P.; Holler, M.; Horns, D.; Jacholkowska, A.; Jahn, C.; Jamrozy, M.; Jung, I.; Kastendieck, M. A.; Katarzyński, K.; Katz, U.; Kaufmann, S.; Khélifi, B.; Klochkov, D.; Kluźniak, W.; Kneiske, T.; Komin, Nu.; Kosack, K.; Kossakowski, R.; Krayzel, F.; Laffon, H.; Lamanna, G.; Lenain, J.-P.; Lennarz, D.; Lohse, T.; Lopatin, A.; Lu, C.-C.; Marandon, V.; Marcowith, A.; Masbou, J.; Maurin, G.; Maxted, N.; Mayer, M.; McComb, T. J. L.; Medina, M. C.; Méhault, J.; Moderski, R.; Mohamed, M.; Moulin, E.; Naumann, C. L.; Naumann-Godo, M.; de Naurois, M.; Nedbal, D.; Nekrassov, D.; Nguyen, N.; Nicholas, B.; Niemiec, J.; Nolan, S. J.; Ohm, S.; de Oña Wilhelmi, E.; Opitz, B.; Ostrowski, M.; Oya, I.; Panter, M.; Paz Arribas, M.; Pekeur, N. W.; Pelletier, G.; Perez, J.; Petrucci, P.-O.; Peyaud, B.; Pita, S.; Pühlhofer, G.; Punch, M.; Quirrenbach, A.; Raue, M.; Reimer, A.; Reimer, O.; Renaud, M.; de los Reyes, R.; Rieger, F.; Ripken, J.; Rob, L.; Rosier-Lees, S.; Rowell, G.; Rudak, B.; Rulten, C. B.; Sahakian, V.; Sanchez, D. A.; Santangelo, A.; Schlickeiser, R.; Schulz, A.; Schwanke, U.; Schwarzburg, S.; Schwemmer, S.; Sheidaei, F.; Skilton, J. L.; Sol, H.; Spengler, G.; Stawarz, Ł.; Steenkamp, R.; Stegmann, C.; Stinzing, F.; Stycz, K.; Sushch, I.; Szostek, A.; Tavernet, J.-P.; Terrier, R.; Tluczykont, M.; Valerius, K.; van Eldik, C.; Vasileiadis, G.; Venter, C.; Viana, A.; Vincent, P.; Völk, H. J.; Volpe, F.; Vorobiov, S.; Vorster, M.; Wagner, S. J.; Ward, M.; White, R.; Wierzcholska, A.; Zacharias, M.; Zajczyk, A.; Zdziarski, A. A.; Zech, A.; Zechlin, H.-S.; Ali, M. O.

    2012-09-01

    Context. In some galaxy clusters, powerful active galactic nuclei (AGN) have blown bubbles with cluster scale extent into the ambient medium. The main pressure support of these bubbles is not known to date, but cosmic rays are a viable possibility. For such a scenario copious gamma-ray emission is expected as a tracer of cosmic rays from these systems. Aims: Hydra A, the closest galaxy cluster hosting a cluster scale AGN outburst, located at a redshift of 0.0538, is investigated for being a gamma-ray emitter with the High Energy Stereoscopic System (H.E.S.S.) array and the Fermi Large Area Telescope (Fermi-LAT). Methods: Data obtained in 20.2 h of dedicated H.E.S.S. observations and 38 months of Fermi-LAT data, gathered by its usual all-sky scanning mode, have been analyzed to search for a gamma-ray signal. Results: No signal has been found in either data set. Upper limits on the gamma-ray flux are derived and are compared to models. These are the first limits on gamma-ray emission ever presented for galaxy clusters hosting cluster scale AGN outbursts. Conclusions: The non-detection of Hydra A in gamma-rays has important implications on the particle populations and physical conditions inside the bubbles in this system. For the case of bubbles mainly supported by hadronic cosmic rays, the most favorable scenario, which involves full mixing between cosmic rays and embedding medium, can be excluded. However, hadronic cosmic rays still remain a viable pressure support agent to sustain the bubbles against the thermal pressure of the ambient medium. The largest population of highly-energetic electrons, which are relevant for inverse-Compton gamma-ray production is found in the youngest inner lobes of Hydra A. The limit on the inverse-Compton gamma-ray flux excludes a magnetic field below half of the equipartition value of 16 μG in the inner lobes.

  9. HYDRA VULGARIS PALLAS, 1766 (HYDROZOA: HYDRIDAE AS BIOINDICATOR OF THE WATER QUALITY OF THE RIVER CHILI, AREQUIPA, PERU

    Directory of Open Access Journals (Sweden)

    Ronald Huarachi

    2012-12-01

    Full Text Available The aim of this study was to use Hydra vulgaris Pallas, 1766 (Hydrozoa: Hydridae as a bioindicator of water quality of the Chili River, Arequipa, Peru. The freshwater hydra were collected in the spring "Ojo del Milagro", Characato District, Arequipa, Peru. H. vulgaris was cultivated under standardized conditions and were fed Artemia sp. K2Cr2O7 was used as a positive control and as a reference toxin. Acute toxicity and morphological changes of H. vulgaris were evaluated on Tiabaya and Tingo, sampling points of the Chili River. The LC50 (median lethal concentration showed: Tingo (LC50-96h = 135.95% classifying it as non-toxic and Tiabaya (LC50 -24h = 61.83%, classifying it as moderately toxic; LC50-48h = 44.19% and LC50 -72h = 38.28% classifying them as toxic; LC50 -96h = 21.44% rating it as very toxic. Significant differences in the morphological changes of H. vulgaris were observed with regard to different concentrations and exposure time in waters sampled from Tingo from 48 h to 96 h and in Tiabaya, significant differences in morphological changes from 24 h to 96 h exposure. The results of the physicochemical parameters of the Chili River were compared with the Peruvian National Standards for Environmental Quality (ECA for water (categories 3 and 4 and recorded high values of biochemical oxygen demand BOD5, NH4 and PO4, and low dissolved oxigen OD values for Tiabaya. In Tingo, NH4 and phosphate were high. In Tiabaya, water was considered more toxic than at Tingo.

  10. Somatostatin signaling system as an ancestral mechanism: Myoregulatory activity of an Allatostatin-C peptide in Hydra.

    Science.gov (United States)

    Alzugaray, María Eugenia; Hernández-Martínez, Salvador; Ronderos, Jorge Rafael

    2016-08-01

    The coordination of physiological processes requires precise communication between cells. Cellular interactions allow cells to be functionally related, facilitating the maintaining of homeostasis. Neuropeptides functioning as intercellular signals are widely distributed in Metazoa. It is assumed that neuropeptides were the first intercellular transmitters, appearing early during the evolution. In Cnidarians, neuropeptides are mainly involved in neurotransmission, acting directly or indirectly on epithelial muscle cells, and thereby controlling coordinated movements. Allatostatins are a group of chemically unrelated neuropeptides that were originally characterized based on their ability to inhibit juvenil hormone synthesis in insects. Allatostatin-C has pleiotropic functions, acting as myoregulator in several insects. In these studies, we analyzed the myoregulatory effect of Aedes aegypti Allatostatin-C in Hydra sp., a member of the phylum Cnidaria. Allatostatin-C peptide conjugated with Qdots revealed specifically distributed cell populations that respond to the peptide in different regions of hydroids. In vivo physiological assays using Allatostatin-C showed that the peptide induced changes in shape and length in tentacles, peduncle and gastrovascular cavity. The observed changes were dose and time dependent suggesting the physiological nature of the response. Furthermore, at highest doses, Allatostatin-C induced peristaltic movements of the gastrovascular cavity resembling those that occur during feeding. In silico search of putative Allatostatin-C receptors in Cnidaria showed that genomes predict the existence of proteins of the somatostatin/Allatostatin-C receptors family. Altogether, these results suggest that Allatostatin-C has myoregulatory activity in Hydra sp, playing a role in the control of coordinated movements during feeding, indicating that Allatostatin-C/Somatostatin based signaling might be an ancestral mechanism.

  11. The Hydra regeneration assay reveals ecological risks in running waters: a new proposal to detect environmental teratogenic threats.

    Science.gov (United States)

    Traversetti, Lorenzo; Del Grosso, Floriano; Malafoglia, Valentina; Colasanti, Marco; Ceschin, Simona; Larsen, Stefano; Scalici, Massimiliano

    2017-03-01

    The regenerative ability of Hydra vulgaris was tested as potential biomarker for the development of a new eco-toxicological index. The test is based on the regeneration rate and the aberration frequency of the columna (body and adhesive foot) after separation from head and tentacles by a bistoury. Particularly, 45 columnae were submerged in the rearing solution (that is Hydra medium) to have control, and 285 in potential contaminated waters to have treatments, collected from 19 sites along 10 rivers in central Italy. ANCOVA and chi-square tests were used to compare values from each site to a laboratory control. Subsequently the values on regeneration rate and aberration frequency were inserted in a double entry matrix, where the match of the two entries in the matrix provides the score of the proposed Teratogenic Risk Index (TRI). Each score corresponded to one of the 5 teratogenic risk classes, to which a risk level was associated: from 1 (no risk) to 5 (very high risk). On the whole, 32% of the studied sites were classified as no teratogenic risk while the remaining showed a variable risk level from low to very high. This study proposed for the first time an early warning system to detect the presence of teratogens in running waters, providing a rapid and cost-effective evaluation method. Therefore, TRI may contribute to initiate adequate measures to manage riverine habitats, and to monitor the running water teratogenic status. Specifically, this index may provide the opportunity to identify the disturbance sources and then to drive the decisions, together with competent authorities, on the catchment and landscape management and on the possible use of waters for urban, agricultural, and industrial activities, since they may show significant effects on the human health.

  12. HYDRA-I: a three-dimensional finite difference code for calculating the thermohydraulic performance of a fuel assembly contained within a canister

    Energy Technology Data Exchange (ETDEWEB)

    McCann, R.A.

    1980-12-01

    A finite difference computer code, named HYDRA-I, has been developed to simulate the three-dimensional performance of a spent fuel assembly contained within a cylindrical canister. The code accounts for the coupled heat transfer modes of conduction, convection, and radiation and permits spatially varying boundary conditions, thermophysical properties, and power generation rates. This document is intended as a manual for potential users of HYDRA-I. A brief discussion of the governing equations, the solution technique, and a detailed description of how to set up and execute a problem are presented. HYDRA-I is designed for operation on a CDC 7600 computer. An appendix is included that summarizes approximately two dozen different cases that have been examined. The cases encompass variations in fuel assembly and canister configurations, power generation rates, filler materials, and gases. The results presented show maximum and various local temperatures and heat fluxes illustrating the changing importance of the three heat transfer modes. Finally, the need for comparison with experimental data is emphasized as an aid in code verification although the limited data available indicate excellent agreement.

  13. Multi-scale biomarker evaluation of the toxicity of a commercial azo dye (Disperse Red 1) in an animal model, the freshwater cnidarian Hydra attenuata.

    Science.gov (United States)

    de Jong, Laetitia; Pech, Nicolas; de Aragão Umbuzeiro, Gisela; Moreau, Xavier

    2016-06-01

    Acute (24 h, 48 h, 72 h) and chronic (7 days) tests have been performed to evaluate the effects of the commercial azo dye Disperse Red 1 (DR1) using various biomarkers in the freshwater invertebrate Hydra attenuata. Morphological changes have been selected to calculate ecotoxicological thresholds for sublethal and lethal DR1 concentrations. A multinomial logistic model showed that the probability of each morphological stage occurrence was function of concentration, time and interaction between both. Results of oxidative balance parameter measurements (72 h and 7 days) suggest that polyps set up defense mechanisms to limit lipid peroxidation caused by DR1. DR1 exposure at hormetic concentrations induces increase of asexual reproductive rates. This result suggests (1) an impact on the fitness-related phenotypical traits and (2) trade-offs between reproduction and maintenance to allow the population to survive harsher conditions. Changes in serotonin immuno-labeling in polyps showing alterations in feeding behavior suggest that chronic DR1 exposure impaired neuronal processes related to ingesting behavior in H. attenuata. This ecotoxicity study sheds light on the possible serotonin function in Hydra model and reports for the first time that serotonin could play a significant role in feeding behavior. This study used a multi-scale biomarker approach investigating biochemical, morphological, reproductive and behavioral endpoints in Hydra attenuata. This organism is proposed for a pertinent animal model to assess ecotoxicological impact of pollutant mixtures in freshwater environment.

  14. Ecotoxicological assessment of cobalt using Hydra model: ROS, oxidative stress, DNA damage, cell cycle arrest, and apoptosis as mechanisms of toxicity.

    Science.gov (United States)

    Zeeshan, Mohammed; Murugadas, Anbazhagan; Ghaskadbi, Surendra; Ramaswamy, Babu Rajendran; Akbarsha, Mohammad Abdulkader

    2017-05-01

    The mechanisms underlying cobalt toxicity in aquatic species in general and cnidarians in particular remain poorly understood. Herein we investigated cobalt toxicity in a Hydra model from morphological, histological, developmental, and molecular biological perspectives. Hydra, exposed to cobalt (0-60 mg/L), were altered in morphology, histology, and regeneration. Exposure to standardized sublethal doses of cobalt impaired feeding by affecting nematocytes, which in turn affected reproduction. At the cellular level, excessive ROS generation, as the principal mechanism of action, primarily occurred in the lysosomes, which was accompanied by the upregulation of expression of the antioxidant genes SOD, GST, GPx, and G6PD. The number of Hsp70 and FoxO transcripts also increased. Interestingly, the upregulations were higher in the 24-h than in the 48-h time-point group, indicating that ROS overwhelmed the cellular defense mechanisms at the latter time-point. Comet assay revealed DNA damage. Cell cycle analysis indicated the induction of apoptosis accompanied or not by cell cycle arrest. Immunoblot analyses revealed that cobalt treatment triggered mitochondria-mediated apoptosis as inferred from the modulation of the key proteins Bax, Bcl-2, and caspase-3. From this data, we suggest the use of Hydra as a model organism for the risk assessment of heavy metal pollution in aquatic ecosystems. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. Insertion devices

    CERN Document Server

    Bahrdt, J

    2006-01-01

    The interaction of an insertion device with the electron beam in a storage ring is discussed. The radiation property including brightness, ux and polarization of an ideal and real planar and helical / elliptical device is described. The magnet design of planar, helical, quasiperiodic devices and of devices with a reduced on axis power density are resumed.

  16. Healthhazard evaluation report HETA 84-075-1634, Hydra-Matic Division of General Motors, Ypsilanti, Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Daniels, W.J.; Orris, P.

    1985-11-01

    Environmental and breathing-zone samples were analyzed for total particulates, trace metals, glycol ethers, and other organic materials at Hydra/Matic, a division of General Motors, in Ypsilanti, Michigan in March, 1984 and March, 1985. The evaluation was requested confidentially to investigate employee exposures to machine coolants and additives used in the centerless grinding operation. The central coolant system had been contaminated by sewage and high concentrations of chemicals had reportedly been added to the system to prevent bacterial growth. Questionnaire interviews were conducted with 75 employees. Eye irritation, sinus congestion, rhinitis, daily cough, upper respiratory infections, and skin complaints such as frequent dryness, itching, rash, and pimples were reported. All concentrations of chemical agents were below their relevant standards or not detectable. The authors note that no airborne contaminant that would pose a health hazard has been identified. Recommendations include properly maintaining the coolant system and individual machines, training employees in proper work practices for use with cutting fluids, and making barrier creams and protective clothing available.

  17. Constraints on the gamma-ray emission from the cluster-scale AGN outburst in the Hydra A galaxy cluster

    CERN Document Server

    Abramowski, A; Aharonian, F; Akhperjanian, A G; Anton, G; Balenderan, S; Balzer, A; Barnacka, A; Becherini, Y; Becker, J; Bernloehr, K; Birsin, E; Biteau, J; Bochow, A; Boisson, C; Bolmont, J; Bordas, P; Brucker, J; Brun, F; Brun, P; Bulik, T; Buesching, I; Carrigan, S; Casanova, S; Cerruti, M; Chadwick, P M; Charbonnier, A; Chaves, R C G; Cheesebrough, A; Cologna, G; Conrad, J; Couturier, C; Daniel, M K; Davids, I D; Degrange, B; Deil, C; Dickinson, H J; Djannati-Atai, A; Domainko, W; Drury, L O'C; Dubus, G; Dutson, K; Dyks, J; Dyrda, M; Egberts, K; Eger, P; Espigat, P; Fallon, L; Fegan, S; Feinstein, F; Fernandes, M V; Fiasson, A; Fontaine, G; Foerster, A; Fuessling, M; Gajdus, M; Gallant, Y A; Garrigoux, T; Gast, H; Gerard, L; Giebels, B; Glicenstein, J F; Glueck, B; Goering, D; Grondin, M -H; Haeffner, S; Hague, J D; Hahn, J; Hampf, D; Harris, J; Hauser, M; Heinz, S; Heinzelmann, G; Henri, G; Hermann, G; Hillert, A; Hinton, J A; Hofmann, W; Hofverberg, P; Holler, M; Horns, D; Jacholkowska, A; Jahn, C; Jamrozy, M; Jung, I; Kastendieck, M A; Katarzynski, K; Katz, U; Kaufmann, S; Khelifi, B; Klochkov, D; Kluzniak, W; Kneiske, T; Komin, Nu; Kosack, K; Kossakowski, R; Krayzel, F; Laffon, H; Lamanna, G; Lenain, J -P; Lennarz, D; Lohse, T; Lopatin, A; Lu, C -C; Marandon, V; Marcowith, A; Masbou, J; Maurin, G; Maxted, N; Mayer, M; McComb, T J L; Medina, M C; Mehault, J; Moderski, R; Mohamed, M; Moulin, E; Naumann, C L; Naumann-Godo, M; de Naurois, M; Nedbal, D; Nekrassov, D; Nguyen, N; Nicholas, B; Niemiec, J; Nolan, S J; Ohm, S; Wilhelmi, E de Ona; Opitz, B; Ostrowski, M; Oya, I; Panter, M; Arribas, M Paz; Pekeur, N W; Pelletier, G; Perez, J; Petrucci, P -O; Peyaud, B; Pita, S; Puehlhofer, G; Punch, M; Quirrenbach, A; Raue, M; Reimer, A; Reimer, O; Renaud, M; Reyes, R de los; Rieger, F; Ripken, J; Rob, L; Rosier-Lees, S; Rowell, G; Rudak, B; Rulten, C B; Sahakian, V; Sanchez, D A; Santangelo, A; Schlickeiser, R; Schulz, A; Schwanke, U; Schwarzburg, S; Schwemmer, S; Sheidaei, F; Skilton, J L; Sol, H; Spengler, G; Stawarz, L; Steenkamp, R; Stegmann, C; Stinzing, F; Stycz, K; Sushch, I; Szostek, A; Tavernet, J -P; Terrier, R; Tluczykont, M; Valerius, K; van Eldik, C; Vasileiadis, G; Venter, C; Viana, A; Vincent, P; Voelk, H J; Volpe, F; Vorobiov, S; Vorster, M; Wagner, S J; Ward, M; White, R; Wierzcholska, A; Zacharias, M; Zajczyk, A; Zdziarski, A A; Zech, A; Zechlin, H -S; Ali, M O

    2012-01-01

    In some galaxy clusters powerful AGN have blown bubbles with cluster scale extent into the ambient medium. The main pressure support of these bubbles is not known to date, but cosmic rays are a viable possibility. For such a scenario copious gamma-ray emission is expected as a tracer of cosmic rays from these systems. Hydra A, the closest galaxy cluster hosting a cluster scale AGN outburst, located at a redshift of 0.0538, is investigated for being a gamma-ray emitter with the High Energy Stereoscopic System (H.E.S.S.) array and the Fermi Large Area Telescope (Fermi-LAT). Data obtained in 20.2 hours of dedicated H.E.S.S. observations and 38 months of Fermi-LAT data, gathered by its usual all-sky scanning mode, have been analyzed to search for a gamma-ray signal. No signal has been found in either data set. Upper limits on the gamma-ray flux are derived and are compared to models. These are the first limits on gamma-ray emission ever presented for galaxy clusters hosting cluster scale AGN outbursts. The non-de...

  18. A Radiation-Hydrodynamics Code Comparison for Laser-Produced Plasmas: FLASH versus HYDRA and the Results of Validation Experiments

    CERN Document Server

    Orban, Chris; Chawla, Sugreev; Wilks, Scott C; Lamb, Donald Q

    2013-01-01

    The potential for laser-produced plasmas to yield fundamental insights into high energy density physics (HEDP) and deliver other useful applications can sometimes be frustrated by uncertainties in modeling the properties and expansion of these plasmas using radiation-hydrodynamics codes. In an effort to overcome this and to corroborate the accuracy of the HEDP capabilities recently added to the publicly available FLASH radiation-hydrodynamics code, we present detailed comparisons of FLASH results to new and previously published results from the HYDRA code used extensively at Lawrence Livermore National Laboratory. We focus on two very different problems of interest: (1) an Aluminum slab irradiated by 15.3 and 76.7 mJ of "pre-pulse" laser energy and (2) a mm-long triangular groove cut in an Aluminum target irradiated by a rectangular laser beam. Because this latter problem bears a resemblance to astrophysical jets, Grava et al., Phys. Rev. E, 78, (2008) performed this experiment and compared detailed x-ray int...

  19. Evidence for Accretion High-Resolution X-ray Spectroscopy of the Classical T Tauri Star TW Hydrae

    CERN Document Server

    Kästner, J H; Schulz, N S; Canizares, C R; Weintraub, D A; Kastner, Joel H.; Huenemoerder, David P.; Schulz, Norbert S.; Canizares, Claude R.; Weintraub, David A.

    2002-01-01

    We present high resolution X-ray spectra of the X-ray bright classical T Tauri star, TW Hydrae, covering the wavelength range of 1.5-25 AA. The differential emission measure derived from fluxes of temperature-sensitive emission lines shows a plasma with a sharply peaked temperature distribution, peaking at log T = 6.5. Abundance anomalies are apparent, with iron very deficient relative to oxygen, while neon is enhanced relative to oxygen. Density-sensitive line ratios of Ne IX and O VII indicate densities near log n_e = 13. A flare with rapid (~1 ks) rise time was detected during our 48 ksec observation; however, based on analysis of the emission-line spectrum during quiescent and flaring states, the derived plasma parameters do not appear strongly time-dependent. The inferred plasma temperature distribution and densities are consistent with a model in which the bulk of the X-ray emission from TW Hya is generated via mass accretion from its circumstellar disk. Assuming accretion powers the X-ray emission, our...

  20. Detection of a Degenerate Companion of the SX Phoenicis Star KZ Hydrae by Studying its Long-Term Variability

    Science.gov (United States)

    Fu, J. N.; Khokhuntod, P.; Rodríguez, E.; Boonyarak, C.; Marak, K.; López-González, M. J.; Zhu, L. Y.; Qian, S. B.; Jiang, S. Y.

    2008-05-01

    We present 109 new times of maximum light of the SX Phoenicis (SX Phe) star KZ Hydrae (KZ Hya) based mainly on our extensive photometric observations for two decades, leading to determination of a general ephemeris combined with the data in the literature. The O - C diagram reveals a continuously increasing period change combined with the light traveling time effect of the orbital motion of KZ Hya in a binary system with an orbital period of 26.8 ± 0.2 years. The deduced mass of the companion cannot be smaller than 0.83 M sun. Since no sign of the companion has ever been observed spectroscopically and the observed color index b - y excludes the possibility of the companion being a late-type main-sequence or dwarf star, KZ Hya becomes the first SX Phe star for which a degenerate companion is detected. The pulsation properties are studied by analyzing the Fourier spectra of the observed light curves while the fundamental parameters are deduced with the simultaneous multicolor uvbyβ data, showing this star to be a strong low-metallicity high-amplitude SX Phe-type variable pulsating in the fundamental radial mode. No signs of multiperiodicity or significant long-term changes in amplitude are detected in the pulsation of this variable.

  1. The mitochondrial genome of Hydra oligactis (Cnidaria, Hydrozoa) sheds new light on animal mtDNA evolution and cnidarian phylogeny.

    Science.gov (United States)

    Kayal, Ehsan; Lavrov, Dennis V

    2008-02-29

    The 16,314-nuceotide sequence of the linear mitochondrial DNA (mtDNA) molecule of Hydra oligactis (Cnidaria, Hydrozoa)--the first from the class Hydrozoa--has been determined. This sequence contains genes for 13 energy pathway proteins, small and large subunit rRNAs, and methionine and tryptophan tRNAs, as is typical for cnidarians. All genes have the same transcriptional orientation and their arrangement in the genome is similar to that of the jellyfish Aurelia aurita. In addition, a partial copy of cox1 is present at one end of the molecule in a transcriptional orientation opposite to the rest of the genes, forming a part of inverted terminal repeat characteristic of linear mtDNA and linear mitochondrial plasmids. The sequence close to at least one end of the molecule contains several homonucleotide runs as well as small inverted repeats that are able to form strong secondary structures and may be involved in mtDNA maintenance and expression. Phylogenetic analysis of mitochondrial genes of H. oligactis and other cnidarians supports the Medusozoa hypothesis but also suggests that Anthozoa may be paraphyletic, with octocorallians more closely related to the Medusozoa than to the Hexacorallia. The latter inference implies that Anthozoa is paraphyletic and that the polyp (rather than a medusa) is the ancestral body type in Cnidaria.

  2. WIYN Open Cluster Study. XXXIX. Abundances in NGC 6253 from HYDRA Spectroscopy of the Li 6708 A Region

    CERN Document Server

    Anthony-Twarog, B J; Twarog, B A; Cummings, J D; Maderak, R M

    2010-01-01

    High-dispersion spectra of 89 potential members of the old, super-metal-rich open cluster, NGC 6253, have been obtained with the HYDRA multi-object spectrograph. Based upon radial-velocity measurements alone, 47 stars at the turnoff of the cluster color-magnitude diagram (CMD) and 18 giants are identified as potential members. Five turnoff stars exhibit evidence of binarity while proper-motion data eliminates two of the dwarfs as members. The mean cluster radial velocity from probable single-star members is -29.4 +/- 1.3 km/sec (sd). A discussion of the current estimates for the cluster reddening, derived independently of potential issues with the BV cluster photometry, lead to an adopted reddening of E(B-V) = 0.22 +/- 0.04. From equivalent width analyses of 38 probable single-star members near the CMD turnoff, the weighted average abundances are found to be [Fe/H] = +0.43 +/- 0.01, [Ni/H] = +0.53 +/- 0.02 and [Si/H] = +0.43 (+0.03,-0.04), where the errors refer to the standard errors of the weighted mean. We...

  3. Peering into the Giant Planet Forming Region of the TW Hydrae Disk with the Gemini Planet Imager

    CERN Document Server

    Rapson, Valerie A; Millar-Blanchaer, Maxwell A; Dong, Ruobing

    2015-01-01

    We present Gemini Planet Imager (GPI) adaptive optics near-infrared images of the giant planet-forming regions of the protoplanetary disk orbiting the nearby (D = 54 pc), pre-main sequence (classical T Tauri) star TW Hydrae. The GPI images, which were obtained in coronagraphic/polarimetric mode, exploit starlight scattered off small dust grains to elucidate the surface density structure of the TW Hya disk from 80 AU to within 10 AU of the star at 1.5 AU resolution. The GPI polarized intensity images unambiguously con?rm the presence of a gap in the radial surface brightness distribution of the inner disk. The gap is centered near 23 AU, with a width of 5 AU and a depth of 50%. In the context of recent simulations of giant planet formation in gaseous, dusty disks orbiting pre-main sequence stars, these results indicate that at least one young planet with a mass 0.2 M_J could be present in the TW Hya disk at an orbital semi-major axis similar to that of Uranus. If this (proto)planet is actively accreting gas fr...

  4. Discovery of seven T Tauri stars and a brown dwarf candidate in the nearby TW Hydrae Association

    CERN Document Server

    Webb, R A; Platais, I; Patience, J; White, R J; Schwartz, M J; McCarthy, C

    1999-01-01

    We report the discovery of five T Tauri star systems, two of which are resolved binaries, in the vicinity of the nearest known region of recent star formation, the TW Hydrae Association. The newly discovered systems display the same signatures of youth (namely high X-ray flux, large Li abundance and strong chromospheric activity) and the same proper motion as the original five members. These similarities firmly establish the group as a bona fide T Tauri association, unique in its proximity to Earth and its complete isolation from any known molecular clouds. At an age of ~10 Myr and a distance of ~50 pc, the association members are excellent candidates for future studies of circumstellar disk dissipation and the formation of brown dwarfs and planets. Indeed, as an example, our speckle imaging revealed a faint, very likely companion 2" north of CoD-33 7795 (TWA 5). Its color and brightness suggest a spectral type ~M8.5 which, at an age of ~10^7 years, implies a mass ~20 M(Jupiter).

  5. Expulsion of symbiotic algae during feeding by the green hydra--a mechanism for regulating symbiont density?

    Directory of Open Access Journals (Sweden)

    Yelena Fishman

    Full Text Available BACKGROUND: Algal-cnidarian symbiosis is one of the main factors contributing to the success of cnidarians, and is crucial for the maintenance of coral reefs. While loss of the symbionts (such as in coral bleaching may cause the death of the cnidarian host, over-proliferation of the algae may also harm the host. Thus, there is a need for the host to regulate the population density of its symbionts. In the green hydra, Chlorohydra viridissima, the density of symbiotic algae may be controlled through host modulation of the algal cell cycle. Alternatively, Chlorohydra may actively expel their endosymbionts, although this phenomenon has only been observed under experimentally contrived stress conditions. PRINCIPAL FINDINGS: We show, using light and electron microscopy, that Chlorohydra actively expel endosymbiotic algal cells during predatory feeding on Artemia. This expulsion occurs as part of the apocrine mode of secretion from the endodermal digestive cells, but may also occur via an independent exocytotic mechanism. SIGNIFICANCE: Our results demonstrate, for the first time, active expulsion of endosymbiotic algae from cnidarians under natural conditions. We suggest this phenomenon may represent a mechanism whereby cnidarians can expel excess symbiotic algae when an alternative form of nutrition is available in the form of prey.

  6. Tracking mechanical and morphological dynamics of regenerating Hydra tissue fragments using a two fingered micro-robotic hand

    Science.gov (United States)

    Veschgini, M.; Gebert, F.; Khangai, N.; Ito, H.; Suzuki, R.; Holstein, T. W.; Mae, Y.; Arai, T.; Tanaka, M.

    2016-03-01

    Regeneration of a tissue fragment of freshwater polyp Hydra is accompanied by significant morphological fluctuations, suggesting the generation of active forces. In this study, we utilized a two fingered micro-robotic hand to gain insights into the mechanics of regenerating tissues. Taking advantage of a high force sensitivity (˜1 nN) of our micro-hand, we non-invasively acquired the bulk elastic modulus of tissues by keeping the strain levels low (ɛ tissue and determined both viscous modulus and elastic modulus simultaneously, following a simple Maxwell model. We further investigated the correlation between the frequency of force fluctuation and that of morphological fluctuation by monitoring one "tweezed" tissue and the other "intact" tissue at the same time. The obtained results clearly indicated that the magnitude and periodicity of the changes in force and shape are directly correlated, confirming that our two fingered micro-hand can precisely quantify the mechanics of soft, dynamic tissue during the regeneration and development in a non-invasive manner.

  7. The molecular cell death machinery in the simple cnidarian Hydra includes an expanded caspase family and pro- and anti-apoptotic Bcl-2 proteins.

    Science.gov (United States)

    Lasi, Margherita; Pauly, Barbara; Schmidt, Nikola; Cikala, Mihai; Stiening, Beate; Käsbauer, Tina; Zenner, Gerhardt; Popp, Tanja; Wagner, Anita; Knapp, Regina T; Huber, Andreas H; Grunert, Michaela; Söding, Johannes; David, Charles N; Böttger, Angelika

    2010-07-01

    The fresh water polyp Hydra belongs to the phylum Cnidaria, which diverged from the metazoan lineage before the appearance of bilaterians. In order to understand the evolution of apoptosis in metazoans, we have begun to elucidate the molecular cell death machinery in this model organism. Based on ESTs and the whole Hydra genome assembly, we have identified 15 caspases. We show that one is activated during apoptosis, four have characteristics of initiator caspases with N-terminal DED, CARD or DD domain and two undergo autoprocessing in vitro. In addition, we describe seven Bcl-2-like and two Bak-like proteins. For most of the Bcl-2 family proteins, we have observed mitochondrial localization. When expressed in mammalian cells, HyBak-like 1 and 2 strongly induced apoptosis. Six of the Bcl-2 family members inhibited apoptosis induced by camptothecin in mammalian cells with HyBcl-2-like 4 showing an especially strong protective effect. This protein also interacted with HyBak-like 1 in a yeast two-hybrid assay. Mutation of the conserved leucine in its BH3 domain abolished both the interaction with HyBak-like 1 and the anti-apoptotic effect. Moreover, we describe novel Hydra BH-3-only proteins. One of these interacted with Bcl-2-like 4 and induced apoptosis in mammalian cells. Our data indicate that the evolution of a complex network for cell death regulation arose at the earliest and simplest level of multicellular organization, where it exhibited a substantially higher level of complexity than in the protostome model organisms Caenorhabditis and Drosophila.

  8. Hydra myc2, a unique pre-bilaterian member of the myc gene family, is activated in cell proliferation and gametogenesis

    Directory of Open Access Journals (Sweden)

    Markus Hartl

    2014-04-01

    Full Text Available The myc protooncogene encodes the Myc transcription factor which is the essential part of the Myc–Max network controlling fundamental cellular processes. Deregulation of myc leads to tumorigenesis and is a hallmark of many human cancers. We have recently identified homologs of myc (myc1, myc2 and max in the early diploblastic cnidarian Hydra and have characterized myc1 in detail. Here we show that myc2 is transcriptionally activated in the interstitial stem cell system. Furthermore, in contrast to myc1, myc2 expression is also detectable in proliferating epithelial stem cells throughout the gastric region. myc2 but not myc1 is activated in cycling precursor cells during early oogenesis and spermatogenesis, suggesting that the Hydra Myc2 protein has a possible non-redundant function in cell cycle progression. The Myc2 protein displays the principal design and properties of vertebrate Myc proteins. In complex with Max, Myc2 binds to DNA with similar affinity as Myc1–Max heterodimers. Immunoprecipitation of Hydra chromatin revealed that both Myc1 and Myc2 bind to the enhancer region of CAD, a classical Myc target gene in mammals. Luciferase reporter gene assays showed that Myc1 but not Myc2 transcriptionally activates the CAD promoter. Myc2 has oncogenic potential when tested in primary avian fibroblasts but to a lower degree as compared to Myc1. The identification of an additional myc gene in Cnidaria, a phylum that diverged prior to bilaterians, with characteristic expression patterns in tissue homeostasis and developmental processes suggests that principle functions of myc genes have arisen very early in metazoan evolution.

  9. Photovoltaic device

    Energy Technology Data Exchange (ETDEWEB)

    Reese, Jason A; Keenihan, James R; Gaston, Ryan S; Kauffmann, Keith L; Langmaid, Joseph A; Lopez, Leonardo; Maak, Kevin D; Mills, Michael E; Ramesh, Narayan; Teli, Samar R

    2017-03-21

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

  10. Photovoltaic device

    Science.gov (United States)

    Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

    2015-06-02

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device with a multilayered photovoltaic cell assembly and a body portion joined at an interface region and including an intermediate layer, at least one interconnecting structural member, relieving feature, unique component geometry, or any combination thereof.

  11. Concentration device

    DEFF Research Database (Denmark)

    2013-01-01

    A concentration device (2) for filter filtration concentration of particles (4) from a volume of a fluid (6). The concentration device (2) comprises a filter (8) configured to filter particles (4) of a predefined size in the volume of the fluid (6). The concentration device (2) comprises...

  12. Photovoltaic device

    Science.gov (United States)

    Reese, Jason A.; Keenihan, James R.; Gaston, Ryan S.; Kauffmann, Keith L.; Langmaid, Joseph A.; Lopez, Leonardo C.; Maak, Kevin D.; Mills, Michael E.; Ramesh, Narayan; Teli, Samar R.

    2015-09-01

    The present invention is premised upon an improved photovoltaic device ("PV device"), more particularly to an improved photovoltaic device (10) with a multilayered photovoltaic cell assembly (100) and a body portion (200) joined at an interface region (410) and including an intermediate layer (500), at least one interconnecting structural member (1500), relieving feature (2500), unique component geometry, or any combination thereof.

  13. Extragalactic large-scale structures behind the southern Milky Way; 1, redshifts obtained at the SAAO in the Hydra/Antlia extension

    CERN Document Server

    Kraan-Korteweg, R C; Balkowski, C; Kraan-Korteweg, Renee C; Fairall, Tony P; Balkowksi, Chantal

    1994-01-01

    Spectroscopic observations have been carried out for galaxies in the Milky Way with the 1.9 m telescope of the South African Astronomical Observatory (SAAO). The galaxies were selected from a deep optical galaxy search covering 266Hydra and Antlia clusters and in the approximate direction of the dipole anisotropy in the Cosmic Microwave Back- ground radiation. The galaxies in the SAAO observing program -- one of the three complementary approaches in mapping the 3D galaxy distribution in the ZOA -- were selected for high central SB and for even distribution over the search area. The galaxies have magnitudes in the range 14.5Hydra/Antlia supercluster across the ZOA...

  14. Comparison of Strong Gravitational Lens Model Software II. HydraLens: Computer-Assisted Strong Gravitational Lens Model Generation and Translation

    CERN Document Server

    Lefor, Alsn T

    2015-01-01

    The behavior of strong gravitational lens model software in the analysis of lens models is not necessarily consistent among the various software available, suggesting that the use of several models may enhance the understanding of the system being studied. Among the publicly available codes, the model input files are heterogeneous, making the creation of multiple models tedious. An enhanced method of creating model files and a method to easily create multiple models, may increase the number of comparison studies. HydraLens simplifies the creation of model files for four strong gravitational lens model software packages, including Lenstool, Gravlens/Lensmodel, glafic and PixeLens, using a custom designed GUI for each of the four codes that simplifies the entry of the model for each of these codes, obviating the need for user manuals to set the values of the many flags and in each data field. HydraLens is designed in a modular fashion, which simplifies the addition of other strong gravitational lens codes in th...

  15. Microfluidic Device

    Science.gov (United States)

    Tai, Yu-Chong (Inventor); Zheng, Siyang (Inventor); Lin, Jeffrey Chun-Hui (Inventor); Kasdan, Harvey L. (Inventor)

    2017-01-01

    Described herein are particular embodiments relating to a microfluidic device that may be utilized for cell sensing, counting, and/or sorting. Particular aspects relate to a microfabricated device that is capable of differentiating single cell types from dense cell populations. One particular embodiment relates a device and methods of using the same for sensing, counting, and/or sorting leukocytes from whole, undiluted blood samples.

  16. The Primary Observation of Monster Hydras from Heterograft%异种嫁接的水螅畸形体初步观察

    Institute of Scientific and Technical Information of China (English)

    吴小婷; 吴佩玲; 汪安泰; 吴程琛; 邓利

    2011-01-01

    Hydra robusta and H. Vulgaris were cut transversely in the sub-hypostome region and the basal portion of two hydranth were grafted together. Three kinds of monster hydras, totally 78 individuals were found after 280 days continuous observation, it was shown that: ① monster and its asexual reproduction offspring contained 2 kinds of falcate nematocyst ( H. Robusta' s and H. Vulgaris' falcate nematocyst) ; ② its length could reach 52 mm when it stretched its body; ③ the average period of asexual gemmation was more than 10 days; ④ individuals died after reproducing 3-8 generations; ⑤ those who had 4, 5 and 6 tentacles consisted of 80% , 10% and 10% the individuals respectively; ⑥ it had no sexual reproduction; ⑦ it needed a relatively long time to regenerate after being cut off. When completing regeneration, both its form and development were as the normal one; ⑧ hyperplastic tissue appeared on the surface of its ectoderm, and went to apoptosis on the scapus, or disintegrated 1-2 days after disengaging form matrix; endodenn's cellular conglomeration frequently disengaged from the body, entering digestive chambers. The phenomena of hyperplasia and apoptosis appeared on the monster hydra from heterograft showed that hydra might have primitive immune system that can identify and exclude heterogenetic tissues.%摘要:把强壮水螅(Hydra robusta)和普通水螅(H.vulgaris)除头后进行异种切口嫁接实验,共获得3例畸形体,对其进行280 d的培养,获得78只畸形子代。追踪观察发现:①畸形体及其无性生殖子代均具有2种钩刺丝囊(强壮水媳钩刺丝囊和普通水螅钩刺丝囊);②其身体伸展时最长达52 mm;③无性出芽生殖的平均生殖周期10 d以上;④个体无性生殖3~8代后凋亡;⑤触手数为4、5和6条的个体分别占80%、10%和10%;⑥不发生有性生殖;⑦切割再生时间长,再生后形态与发育特性同术前个体;⑧

  17. Ferroelectric devices

    CERN Document Server

    Uchino, Kenji

    2009-01-01

    Updating its bestselling predecessor, Ferroelectric Devices, Second Edition assesses the last decade of developments-and setbacks-in the commercialization of ferroelectricity. Field pioneer and esteemed author Uchino provides insight into why this relatively nascent and interdisciplinary process has failed so far without a systematic accumulation of fundamental knowledge regarding materials and device development.Filling the informational void, this collection of information reviews state-of-the-art research and development trends reflecting nano and optical technologies, environmental regulat

  18. Glycosaminoglycans in Hydra magnipapillata (Hydrozoa, Cnidaria): demonstration of chondroitin in the developing nematocyst, the sting organelle, and structural characterization of glycosaminoglycans.

    Science.gov (United States)

    Yamada, Shuhei; Morimoto, Hideto; Fujisawa, Toshitaka; Sugahara, Kazuyuki

    2007-08-01

    The hydrozoan is the simplest organism whose movements are governed by the neuromuscular system, and its de novo morphogenesis can be easily induced by the removal of body parts. These features make the hydrozoan an excellent model for studying the regeneration of tissues in vivo, especially in the nervous system. Although glycosaminoglycans (GAGs) and proteoglycans (PGs) have been implicated in the signaling functions of various growth factors and play critical roles in the development of the central nervous system, the isolation and characterization of GAGs from hydrozoans have never been reported. Here, we characterized GAGs of Hydra magnipapillata. Immunostaining using anti-GAG antibodies showed chondroitin or chondroitin sulfate (CS) in the developing nematocyst, which is a sting organelle specific to cnidarians. The CS-PGs might furnish an environment for assembling nematocyst components, and might themselves be components of nematocysts. Therefore, GAGs were isolated from Hydra and their structural features were examined. A considerable amount of CS, three orders of magnitude less heparan sulfate (HS), but no hyaluronan were found, as in Caenorhabditis elegans. Analysis of the disaccharide composition of HS revealed glucosamine 2-N-sulfation, glucosamine 6-O-sulfation, and uronate 2-O-sulfation. CS contains not only nonsulfated and 4-O-sulfated N-acetylgalactosamine (GalNAc) but also 6-O-sulfated GalNAc. The average molecular size of CS and HS was 110 and 10 kDa, respectively. It has also been established here that CS chains are synthesized on the core protein through the ubiquitous linkage region tetrasaccharide, suggesting that indispensable functions of the linkage region in the synthesis of GAGs have been conserved during evolution.

  19. Ventricular assist device

    Science.gov (United States)

    VAD; RVAD; LVAD; BVAD; Right ventricular assist device; Left ventricular assist device; Biventricular assist device; Heart pump; Left ventricular assist system; LVAS; Implantable ventricular assist device

  20. Separating device

    NARCIS (Netherlands)

    De Jong, T.P.R.

    2001-01-01

    A sorting device (1) suitable for sorting wire from a waste stream, comprising a body (2) that moves when in use, and provided with spikes or similar projections. The body is embodied as a rotatable roll (2), which oscillates axially during its rotation. The roll is coupled to an oscillation engine

  1. Detection device

    Science.gov (United States)

    Smith, J.E.

    1981-02-27

    The present invention is directed to a detection device comprising: (1) an entrance chamber; (2) a central chamber; and (3) an exit chamber. The central chamber includes an ionizing gas, anode, and means for connecting the anode with an external power supply and pulse counter.

  2. Assistive Devices

    Science.gov (United States)

    ... a number of assistive devices. These are tools, products or types of equipment that help you perform tasks and activities. They may help you move around, see, communicate, eat, or get dressed. Some are high-tech tools, such as computers. Others are much simpler, ...

  3. Printing Device

    NARCIS (Netherlands)

    Berg, van den M.J.; Markies, P.R.; Zuilhof, H.

    2014-01-01

    An ink jetprinting device includes a pressure chamber formed by a plurality of wall segments, a first aperture extending through a wall segment and communicating with an ink jet orifice and a second aperture extending through a wall segment and communicating with an ink supply duct. The pressure

  4. Electrochemical device

    Science.gov (United States)

    Grimes, Patrick G.; Einstein, Harry; Bellows, Richard J.

    1988-01-12

    A tunnel protected electrochemical device features channels fluidically communicating between manifold, tunnels and cells. The channels are designed to provide the most efficient use of auxiliary power. The channels have a greater hydraulic pressure drop and electrical resistance than the manifold. This will provide a design with the optimum auxiliary energy requirements.

  5. Printing Device

    NARCIS (Netherlands)

    Berg, van den M.J.; Markies, P.R.; Zuilhof, H.

    2014-01-01

    An ink jetprinting device includes a pressure chamber formed by a plurality of wall segments, a first aperture extending through a wall segment and communicating with an ink jet orifice and a second aperture extending through a wall segment and communicating with an ink supply duct. The pressure cha

  6. Balancing device

    NARCIS (Netherlands)

    Van Dorsser, W.D.; Herder, J.L.; Wisse B.M.; Barents, R.

    2007-01-01

    The invention relates to a balancing device for a mass, comprising an arm that is adjustable about a pivoting point and with which the mass is coupled, and an adjustable spring system that is coupled with the arm, which spring system comprises at least one spring, wherein the spring system comprises

  7. 长蛇灸治疗强直性脊柱炎中的护理安全管理%Nursing security management of hydra moxibustion treatment applied in patients with ankylosing spondylitis

    Institute of Scientific and Technical Information of China (English)

    熊丽萍; 龚小燕; 潘芳

    2011-01-01

    目的 探讨长蛇灸治疗强直性脊柱炎中的护理安全问题及其防范措施,防止不良并发症发生.方法 对患者施灸前做好充分的灸前准备,并针对治疗中容易发生的皮肤过敏及感染、烫伤、晕厥等安全问题进行积极防范以及灸后的护理干预.结果 38例患者无并发症发生,保障了患者安全.结论 针对长蛇灸治疗强直性脊柱炎中的护理安全问题积极防范,可以保障患者安全.%Objective To explore nursing safety problems and management strategies of hydra moxibustion treatment applied in patients with ankyiosing spondylitis, so as to prevent the occurrence of adverse complications. Methods Adequate preparation was done before hydra moxibustion treatment, and the problems, which were easy to occur during the treatment,such as skin allergies and infections,burns,syncope and other safety issues, were prevented actively,and nursing interventions after hydra moxibustion treatment were strengthened. Result No adverse complications happened in 38 patients, and the safty of patients was protected. Conclusion Positive prevention of nursing security problems during hydra moxibustion treatment can enhance the safety of patients.

  8. Horizontal gene transfer contributed to the evolution of extracellular surface structures: the freshwater polyp Hydra is covered by a complex fibrous cuticle containing glycosaminoglycans and proteins of the PPOD and SWT (sweet tooth families.

    Directory of Open Access Journals (Sweden)

    Angelika Böttger

    Full Text Available The single-cell layered ectoderm of the fresh water polyp Hydra fulfills the function of an epidermis by protecting the animals from the surrounding medium. Its outer surface is covered by a fibrous structure termed the cuticle layer, with similarity to the extracellular surface coats of mammalian epithelia. In this paper we have identified molecular components of the cuticle. We show that its outermost layer contains glycoproteins and glycosaminoglycans and we have identified chondroitin and chondroitin-6-sulfate chains. In a search for proteins that could be involved in organising this structure we found PPOD proteins and several members of a protein family containing only SWT (sweet tooth domains. Structural analyses indicate that PPODs consist of two tandem β-trefoil domains with similarity to carbohydrate-binding sites found in lectins. Experimental evidence confirmed that PPODs can bind sulfated glycans and are secreted into the cuticle layer from granules localized under the apical surface of the ectodermal epithelial cells. PPODs are taxon-specific proteins which appear to have entered the Hydra genome by horizontal gene transfer from bacteria. Their acquisition at the time Hydra evolved from a marine ancestor may have been critical for the transition to the freshwater environment.

  9. "Distinvar" device

    CERN Multimedia

    CERN PhotoLab

    1965-01-01

    The alignment of one of the accelerator magnets being checked by the AR Division survey group. A "distinvar" device, invented by the group, using calibrated invar wires stretched between the fixed survey pillar (on the left) and a fixed point on the magnet. In two days it is thus possible to measure the alignment of the 100 magnets with an accuracy better than 1/10.

  10. Magnetohydrodynamic device

    Energy Technology Data Exchange (ETDEWEB)

    Gorlin, S.M.; Ljubimov, G.A.; Bitjurin, V.A.; Kovbasjuk, V.I.; Maximenko, V.I.; Medin, S.A.; Barshak, A.E.

    1979-12-25

    A magnetohydrodynamic device having a duct for a conducting gas to flow at an angle with the direction of the magnetic field induction vector is described. The duct is situated in the magnetic system and is provided with a plurality of electrodes adapted to interact electrically with the gas, whereas the cross-sectional shape of the duct working space is bounded by a closed contour formed by a curve inscribed into a rectangle. 1 claim.

  11. Electrooptical devices

    Science.gov (United States)

    Hurwitz, C. E.

    1980-03-01

    This report covers work carried out with support of the Department of the Air Force during the period 1 October 1979 through 31 March 1980. A part of this support was provided by the Rome Air Development Center. CW operation at temperatures up to 55 C has been achieved for GaInAsP/InP double-heterostructure (DH) lasers emitting at 1.5 micrometers, which were grown without a GaInAsP buffer layer. These devices are of interest for use as sources in fiber-optics communications systems, since the lowest transmission loss reported for fused-silica optical fibers occurs at 1.55 micrometers. Surface passivation techniques developed for InP and GaInAsP avalanche photodiodes have resulted in reductions of dark current as large as four orders of magnitude, to values as low as .0000016 A/sq cm at 0.9 V(b) where V(b) is the breakdown voltage. Devices consisting entirely of InP have been passivated with plasma-deposited Si3N4, and those with a GaInAsP layer but with the p-n junction in InP have been passivated with polyimide. Neither of these techniques successfully reduces dark currents in devices with the p-n junction in the GaInAsP, but a film of photoresist sprayed with SF6 as the propellant has given excellent results. The electrical characteristics in InP ion implanted with Sn, Ge, Si, and C have been investigated. All of these column IV elements yielded n-type conductivity and Sn, Ge, and Si showed high electrical activation; however, implanted C was found to have a net electrical activation of only about 5 percent.

  12. Scalable devices

    KAUST Repository

    Krüger, Jens J.

    2014-01-01

    In computer science in general and in particular the field of high performance computing and supercomputing the term scalable plays an important role. It indicates that a piece of hardware, a concept, an algorithm, or an entire system scales with the size of the problem, i.e., it can not only be used in a very specific setting but it\\'s applicable for a wide range of problems. From small scenarios to possibly very large settings. In this spirit, there exist a number of fixed areas of research on scalability. There are works on scalable algorithms, scalable architectures but what are scalable devices? In the context of this chapter, we are interested in a whole range of display devices, ranging from small scale hardware such as tablet computers, pads, smart-phones etc. up to large tiled display walls. What interests us mostly is not so much the hardware setup but mostly the visualization algorithms behind these display systems that scale from your average smart phone up to the largest gigapixel display walls.

  13. Practical microwave electron devices

    CERN Document Server

    Meurant, Gerard

    2013-01-01

    Practical Microwave Electron Devices provides an understanding of microwave electron devices and their applications. All areas of microwave electron devices are covered. These include microwave solid-state devices, including popular microwave transistors and both passive and active diodes; quantum electron devices; thermionic devices (including relativistic thermionic devices); and ferrimagnetic electron devices. The design of each of these devices is discussed as well as their applications, including oscillation, amplification, switching, modulation, demodulation, and parametric interactions.

  14. Electrophoresis device

    Science.gov (United States)

    Rhodes, P. H.; Snyder, R. S. (Inventor)

    1982-01-01

    A device for separating cellular particles of a sample substance into fractionated streams of different cellular species includes a casing having a distribution chamber, a separation chamber, and a collection chamber. The electrode chambers are separated from the separation chamber interior by means of passages such that flow variations and membrane variations around the slotted portion of the electrode chamber do not enduce flow perturbations into the laminar buffer curtain flowing in the separation chamber. The cellular particles of the sample are separated under the influence of the electrical field and the separation chamber into streams of different cellular species. The streams of separated cells enter a partition array in the collection chamber where they are fractionated and collected.

  15. Stratification devices

    DEFF Research Database (Denmark)

    Andersen, Elsa; Furbo, Simon

    2008-01-01

    heating system. High temperatures in the top of the storage tank established by the energy from the solar collector reduce the use of auxiliary energy. Low temperatures in the bottom of the storage tank improve the operation conditions for the solar collector. Using thermal stratified heat storages...... results in longer operation periods and improved utilization of the solar collector. Thermal stratification can be achieved, for example by using inlet stratification devices at all inlets to the storage tank. This paper presents how thermal stratification is established and utilized by means of inlet......Thermal stratification in the storage tank is extremely important in order to achieve high thermal performance of a solar heating system. High temperatures in the top of the storage tank and low temperatures in the bottom of the storage tank lead to the best operation conditions for any solar...

  16. A TARGETED SEARCH FOR PECULIARLY RED L AND T DWARFS IN SDSS, 2MASS, AND WISE: DISCOVERY OF A POSSIBLE L7 MEMBER OF THE TW HYDRAE ASSOCIATION

    Energy Technology Data Exchange (ETDEWEB)

    Kellogg, Kendra; Metchev, Stanimir [Western University, Centre for Planetary and Space Exploration, 1151 Richmond St, London, ON N6A 3K7 (Canada); Geißler, Kerstin; Hicks, Shannon [Stony Brook University, Stony Brook, NY 11790 (United States); Kirkpatrick, J. Davy [Infrared Processing and Analysis Center, Mail Code 100-22, California Institute of Technology, 1200 E. California Blvd., Pasadena, CA 91125 (United States); Kurtev, Radostin, E-mail: kkellogg@uwo.ca, E-mail: smetchev@uwo.ca [Instituto de Física y Astronomía, Facultad de Ciencias, Universidad de Valparaíso, Ave. Gran Bretaña 1111, Playa Ancha, Casilla 53, Valparaíso (Chile)

    2015-12-15

    We present the first results from a targeted search for brown dwarfs with unusual red colors indicative of peculiar atmospheric characteristics. These include objects with low surface gravities or with unusual dust content or cloud properties. From a positional cross-match of SDSS, 2MASS, and WISE, we have identified 40 candidate peculiar early-L to early-T dwarfs that are either new objects or have not been identified as peculiar through prior spectroscopy. Using low-resolution spectra, we confirm that 10 of the candidates are either peculiar or potential L/T binaries. With a J − K{sub s} color of 2.62 ± 0.15 mag, one of the new objects—the L7 dwarf 2MASS J11193254–1137466—is among the reddest field dwarfs currently known. Its proper motion and photometric parallax indicate that it is a possible member of the TW Hydrae moving group. If confirmed, it would be the lowest-mass (5–6 M{sub Jup}) free-floating member. We also report a new T dwarf, 2MASS J22153705+2110554, that was previously overlooked in the SDSS footprint. These new discoveries demonstrate that despite the considerable scrutiny already devoted to the SDSS and 2MASS surveys, our exploration of these data sets is not yet complete.

  17. Physical parameters of late M-type members of Chamaleon I and TW Hydrae Association: Dust settling, age dispersion and activity

    CERN Document Server

    Bayo, A; Allard, F; Henning, T; Comeron, F; Morales-Calderon, M; Rajpurohit, A S; Ramırez, K Pena; Beamın, J C

    2016-01-01

    Although mid-to-late type M dwarfs are the most common stars in our stellar neighborhood, our knowledge of these objects is still limited. Open questions include the evolution of their angular momentum, internal structures, dust settling in their atmospheres, age dispersion within populations. In addition, at young ages, late-type Ms have masses below the hydrogen burning limit and therefore are key objects in the debate on the brown dwarf mechanism of formation. In this work we determine and study in detail the physical parameters of two samples of young, late M-type sources belonging to either the Chamaeleon I Dark Cloud or the TW Hydrae Association and compare them with the results obtained in the literature for other young clusters and also for older, field, dwarfs. We used multi-wavelength photometry to construct and analyze SEDs to determine general properties of the photosphere and disk presence. We also used low resolution optical and near-infrared spectroscopy to study activity, accretion, gravity an...

  18. A Chandra study of the large-scale shock and cool filaments in Hydra A: Evidence for substantial gas dredge-up by the central outburst

    CERN Document Server

    Gitti, Myriam; David, Laurence P; McNamara, Brian R; Wise, Michael W

    2011-01-01

    We present the results of a Chandra study of the Hydra A galaxy cluster, where a powerful AGN outburst created a large-scale cocoon shock. We investigated possible azimuthal variations in shock strength and shape, finding indications for a weak shock with a Mach number in the range ~1.2-1.3. We measured the temperature change across the shock front. However, the detection of a temperature rise in the regions immediately inside of the front is complicated by the underlying temperature profile of the cluster atmosphere. We measured the global temperature profile of the cluster up to 700 kpc, which represents the farthest measurement obtained with Chandra for this cluster. A "plateau" in the temperature profile in the range ~70-150 kpc indicates the presence of cool gas, which is likely the result of uplift of material by the AGN outburst. After masking the cool filaments visible in the hardness ratio map, the plateau disappears and the temperature profile recovers a typical shape with a peak around 190 kpc, jus...

  19. Integrated device architectures for electrochromic devices

    Energy Technology Data Exchange (ETDEWEB)

    Frey, Jonathan Mack; Berland, Brian Spencer

    2015-04-21

    This disclosure describes systems and methods for creating monolithically integrated electrochromic devices which may be a flexible electrochromic device. Monolithic integration of thin film electrochromic devices may involve the electrical interconnection of multiple individual electrochromic devices through the creation of specific structures such as conductive pathway or insulating isolation trenches.

  20. Laser device

    Science.gov (United States)

    Scott, Jill R.; Tremblay, Paul L.

    2007-07-10

    A laser device includes a target position, an optical component separated a distance J from the target position, and a laser energy source separated a distance H from the optical component, distance H being greater than distance J. A laser source manipulation mechanism exhibits a mechanical resolution of positioning the laser source. The mechanical resolution is less than a spatial resolution of laser energy at the target position as directed through the optical component. A vertical and a lateral index that intersect at an origin can be defined for the optical component. The manipulation mechanism can auto align laser aim through the origin during laser source motion. The laser source manipulation mechanism can include a mechanical index. The mechanical index can include a pivot point for laser source lateral motion and a reference point for laser source vertical motion. The target position can be located within an adverse environment including at least one of a high magnetic field, a vacuum system, a high pressure system, and a hazardous zone. The laser source and an electro-mechanical part of the manipulation mechanism can be located outside the adverse environment. The manipulation mechanism can include a Peaucellier linkage.

  1. Medical devices: US medical device regulation.

    Science.gov (United States)

    Jarow, Jonathan P; Baxley, John H

    2015-03-01

    Medical devices are regulated by the US Food and Drug Administration (FDA) within the Center for Devices and Radiological Health. Center for Devices and Radiological Health is responsible for protecting and promoting the public health by ensuring the safety, effectiveness, and quality of medical devices, ensuring the safety of radiation-emitting products, fostering innovation, and providing the public with accurate, science-based information about the products we oversee, throughout the total product life cycle. The FDA was granted the authority to regulate the manufacturing and marketing of medical devices in 1976. It does not regulate the practice of medicine. Devices are classified based on complexity and level of risk, and "pre-1976" devices were allowed to remain on the market after being classified without FDA review. Post-1976 devices of lower complexity and risk that are substantially equivalent to a marketed "predicate" device may be cleared through the 510(k) premarket notification process. Clinical data are typically not needed for 510(k) clearance. In contrast, higher-risk devices typically require premarket approval. Premarket approval applications must contain data demonstrating reasonable assurance of safety and efficacy, and this information typically includes clinical data. For novel devices that are not high risk, the de novo process allows FDA to simultaneously review and classify new devices. Devices that are not legally marketed are permitted to be used for clinical investigation purposes in the United States under the Investigational Device Exemptions regulation.

  2. Physical parameters of late M-type members of Chamaeleon I and TW Hydrae Association: dust settling, age dispersion and activity

    Science.gov (United States)

    Bayo, A.; Barrado, D.; Allard, F.; Henning, T.; Comerón, F.; Morales-Calderón, M.; Rajpurohit, A. S.; Peña Ramírez, K.; Beamín, J. C.

    2017-02-01

    Although mid-to-late type M dwarfs are the most common stars in our stellar neighbourhood, our knowledge of these objects is still limited. Open questions include the evolution of their angular momentum, internal structures, dust settling in their atmospheres and age dispersion within populations. In addition, at young ages, late-type Ms have masses below the hydrogen burning limit and therefore are key objects in the debate on the brown dwarf mechanism of formation. In this work, we determine and study in detail the physical parameters of two samples of young, late M-type sources belonging to either the Chamaeleon I dark cloud or the TW Hydrae Association and compare them with the results obtained in the literature for other young clusters and also for older, field, dwarfs. We used multiwavelength photometry to construct and analyse SEDs to determine general properties of the photosphere and disc presence. We also used low-resolution optical and near-infrared spectroscopy to study activity, accretion, gravity and effective temperature sensitive indicators. We propose a Virtual Observatory-based spectral index that is both temperature and age sensitive. We derived physical parameters using independent techniques confirming the already common feature/problem of the age/luminosity spread. In particular, we highlight two brown dwarfs showing very similar temperatures but clearly different surface gravity (explained invoking extreme early accretion). We also show how, despite large improvement in the dust treatment in theoretical models, there is still room for further progress in the simultaneous reproduction of the optical and near-infrared features of these cold young objects.

  3. Medical Device Safety

    Science.gov (United States)

    A medical device is any product used to diagnose, cure, or treat a condition, or to prevent disease. They ... may need one in a hospital. To use medical devices safely Know how your device works. Keep ...

  4. Implantable electronic medical devices

    CERN Document Server

    Fitzpatrick, Dennis

    2014-01-01

    Implantable Electronic Medical Devices provides a thorough review of the application of implantable devices, illustrating the techniques currently being used together with overviews of the latest commercially available medical devices. This book provides an overview of the design of medical devices and is a reference on existing medical devices. The book groups devices with similar functionality into distinct chapters, looking at the latest design ideas and techniques in each area, including retinal implants, glucose biosensors, cochlear implants, pacemakers, electrical stimulation t

  5. Ultraefficient Themoelectric Devices Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Thermoelectric (TE) devices already found a wide range of commercial, military and aerospace applications. However, at present commercially available TE devices...

  6. Fundamentals, current state of the development of, and prospects for further improvement of the new-generation thermal-hydraulic computational HYDRA-IBRAE/LM code for simulation of fast reactor systems

    Science.gov (United States)

    Alipchenkov, V. M.; Anfimov, A. M.; Afremov, D. A.; Gorbunov, V. S.; Zeigarnik, Yu. A.; Kudryavtsev, A. V.; Osipov, S. L.; Mosunova, N. A.; Strizhov, V. F.; Usov, E. V.

    2016-02-01

    The conceptual fundamentals of the development of the new-generation system thermal-hydraulic computational HYDRA-IBRAE/LM code are presented. The code is intended to simulate the thermalhydraulic processes that take place in the loops and the heat-exchange equipment of liquid-metal cooled fast reactor systems under normal operation and anticipated operational occurrences and during accidents. The paper provides a brief overview of Russian and foreign system thermal-hydraulic codes for modeling liquid-metal coolants and gives grounds for the necessity of development of a new-generation HYDRA-IBRAE/LM code. Considering the specific engineering features of the nuclear power plants (NPPs) equipped with the BN-1200 and the BREST-OD-300 reactors, the processes and the phenomena are singled out that require a detailed analysis and development of the models to be correctly described by the system thermal-hydraulic code in question. Information on the functionality of the computational code is provided, viz., the thermalhydraulic two-phase model, the properties of the sodium and the lead coolants, the closing equations for simulation of the heat-mass exchange processes, the models to describe the processes that take place during the steam-generator tube rupture, etc. The article gives a brief overview of the usability of the computational code, including a description of the support documentation and the supply package, as well as possibilities of taking advantages of the modern computer technologies, such as parallel computations. The paper shows the current state of verification and validation of the computational code; it also presents information on the principles of constructing of and populating the verification matrices for the BREST-OD-300 and the BN-1200 reactor systems. The prospects are outlined for further development of the HYDRA-IBRAE/LM code, introduction of new models into it, and enhancement of its usability. It is shown that the program of development and

  7. Rhetorical Devices in English Advertisements

    Institute of Scientific and Technical Information of China (English)

    陈芃

    2011-01-01

    In order to achieve persuasive and convincing effects,rhetorical devices are frequently applied in English advertisements.The paper classifies rhetorical devices into four basic categories: phonetic devices,lexical devices,syntactic devices and figures of

  8. Implantable Medical Devices

    Science.gov (United States)

    ... Artery Disease Venous Thromboembolism Aortic Aneurysm More Implantable Medical Devices Updated:Sep 16,2016 For Rhythm Control ... a Heart Attack Introduction Medications Surgical Procedures Implantable Medical Devices • Life After a Heart Attack • Heart Attack ...

  9. Thermography of electronic devices

    OpenAIRE

    Panfilova S. P.; Vlasov A. I.; Gridnev V. N.; Chervinsky A. S.

    2007-01-01

    The possibility of application of thermography to diagnose the electronic devices is analyzed in the article. Typical faults of electronic devices which can be found by means of thermography are given. Advantages of noncontact thermal inspection in comparison with the contact one are described. Some features of thermography of electronic devices are considered. Thermography apparatus is viewed and some pieces of advice about choosing it for electronic devices diagnosis are given. An example o...

  10. Heterostructures and quantum devices

    CERN Document Server

    Einspruch, Norman G

    1994-01-01

    Heterostructure and quantum-mechanical devices promise significant improvement in the performance of electronic and optoelectronic integrated circuits (ICs). Though these devices are the subject of a vigorous research effort, the current literature is often either highly technical or narrowly focused. This book presents heterostructure and quantum devices to the nonspecialist, especially electrical engineers working with high-performance semiconductor devices. It focuses on a broad base of technical applications using semiconductor physics theory to develop the next generation of electrical en

  11. Organic photosensitive devices

    Science.gov (United States)

    Rand, Barry P; Forrest, Stephen R

    2013-11-26

    The present invention generally relates to organic photosensitive optoelectronic devices. More specifically, it is directed to organic photosensitive optoelectronic devices having a photoactive organic region containing encapsulated nanoparticles that exhibit plasmon resonances. An enhancement of the incident optical field is achieved via surface plasmon polariton resonances. This enhancement increases the absorption of incident light, leading to a more efficient device.

  12. Device-less interaction

    NARCIS (Netherlands)

    Monaci, G.; Triki, M.; Sarroukh, B.E.

    2009-01-01

    This document describes the results of a technology survey for device-less interaction. The Device-less Interaction project (2007-307) aims at providing interaction options for future home appliances without resorting to a remote control or any other dedicated control device. The target home applia

  13. Organic photosensitive devices

    Energy Technology Data Exchange (ETDEWEB)

    Rand, Barry P; Forrest, Stephen R

    2013-11-26

    The present invention generally relates to organic photosensitive optoelectronic devices. More specifically, it is directed to organic photosensitive optoelectronic devices having a photoactive organic region containing encapsulated nanoparticles that exhibit plasmon resonances. An enhancement of the incident optical field is achieved via surface plasmon polariton resonances. This enhancement increases the absorption of incident light, leading to a more efficient device.

  14. Photovoltaic device and method

    Science.gov (United States)

    Cleereman, Robert; Lesniak, Michael J.; Keenihan, James R.; Langmaid, Joe A.; Gaston, Ryan; Eurich, Gerald K.; Boven, Michelle L.

    2015-11-24

    The present invention is premised upon an improved photovoltaic device ("PVD") and method of use, more particularly to an improved photovoltaic device with an integral locator and electrical terminal mechanism for transferring current to or from the improved photovoltaic device and the use as a system.

  15. Unitary lens semiconductor device

    Science.gov (United States)

    Lear, Kevin L.

    1997-01-01

    A unitary lens semiconductor device and method. The unitary lens semiconductor device is provided with at least one semiconductor layer having a composition varying in the growth direction for unitarily forming one or more lenses in the semiconductor layer. Unitary lens semiconductor devices may be formed as light-processing devices such as microlenses, and as light-active devices such as light-emitting diodes, photodetectors, resonant-cavity light-emitting diodes, vertical-cavity surface-emitting lasers, and resonant cavity photodetectors.

  16. Optical plasma microelectronic devices

    CERN Document Server

    Forati, Ebrahim; Dill, Thyler; Sievenpiper, Dan

    2015-01-01

    The semiconductor channel in conventional microelectronic devices was successfully replaced with an optically triggered gas plasma channel. The combination of DC and laser-induced gas ionizations controls the conductivity of the channel, enabling us to realize different electronic devices such as transistors, switches, modulators, etc. A special micro-scale metasurface was used to enhance the laser-gas interaction, as well as combining it with DC ionization properly. Optical plasma devices benefit form the advantages of plasma/vacuum electronic devices while preserving most of the integrablity of semiconductor based devices.

  17. FLUIDICS DEVICE FOR ASSAY

    DEFF Research Database (Denmark)

    2007-01-01

    The present invention relates to a device for use in performing assays on standard laboratory solid supports whereon chemical entities are attached. The invention furthermore relates to the use of such a device and a kit comprising such a device. The device according to the present invention is a......, when operatively connected, one or more chambers (21) comprising the chemical entities (41), the inlet(s) (5) and outlet(s) (6) and chambers (21) being in fluid connection. The device further comprise means for providing differing chemical conditions in each chamber (21)....

  18. Solid state devices

    Science.gov (United States)

    1991-01-01

    The Solid State Device research program is directed toward developing innovative devices for space remote and in-situ sensing, and for data processing. Innovative devices can result from the standard structures in innovative materials such as low and high temperature superconductors, strained layer superlattices, or diamond films. Innovative devices can also result from innovative structures achieved using electron tunneling or nanolithography in standard materials. A final step is to use both innovative structures and innovative materials. A new area of emphasis is the miniaturization of sensors and instruments molded by using the techniques of electronic device fabrication to micromachine silicon into micromechanical and electromechanical sensors and actuators.

  19. Abstract Storage Devices

    CERN Document Server

    Koenig, Robert; Tessaro, Stefano

    2007-01-01

    A quantum storage device differs radically from a conventional physical storage device. Its state can be set to any value in a certain (infinite) state space, but in general every possible read operation yields only partial information about the stored state. The purpose of this paper is to initiate the study of a combinatorial abstraction, called abstract storage device (ASD), which models deterministic storage devices with the property that only partial information about the state can be read, but that there is a degree of freedom as to which partial information should be retrieved. This concept leads to a number of interesting problems which we address, like the reduction of one device to another device, the equivalence of devices, direct products of devices, as well as the factorization of a device into primitive devices. We prove that every ASD has an equivalent ASD with minimal number of states and of possible read operations. Also, we prove that the reducibility problem for ASD's is NP-complete, that t...

  20. Smart portable rehabilitation devices

    Directory of Open Access Journals (Sweden)

    Leahey Matt

    2005-07-01

    Full Text Available Abstract Background The majority of current portable orthotic devices and rehabilitative braces provide stability, apply precise pressure, or help maintain alignment of the joints with out the capability for real time monitoring of the patient's motions and forces and without the ability for real time adjustments of the applied forces and motions. Improved technology has allowed for advancements where these devices can be designed to apply a form of tension to resist motion of the joint. These devices induce quicker recovery and are more effective at restoring proper biomechanics and improving muscle function. However, their shortcoming is in their inability to be adjusted in real-time, which is the most ideal form of a device for rehabilitation. This introduces a second class of devices beyond passive orthotics. It is comprised of "active" or powered devices, and although more complicated in design, they are definitely the most versatile. An active or powered orthotic, usually employs some type of actuator(s. Methods In this paper we present several new advancements in the area of smart rehabilitation devices that have been developed by the Northeastern University Robotics and Mechatronics Laboratory. They are all compact, wearable and portable devices and boast re-programmable, real time computer controlled functions as the central theme behind their operation. The sensory information and computer control of the three described devices make for highly efficient and versatile systems that represent a whole new breed in wearable rehabilitation devices. Their applications range from active-assistive rehabilitation to resistance exercise and even have applications in gait training. The three devices described are: a transportable continuous passive motion elbow device, a wearable electro-rheological fluid based knee resistance device, and a wearable electrical stimulation and biofeedback knee device. Results Laboratory tests of the devices

  1. Smart portable rehabilitation devices.

    Science.gov (United States)

    Mavroidis, Constantinos; Nikitczuk, Jason; Weinberg, Brian; Danaher, Gil; Jensen, Katherine; Pelletier, Philip; Prugnarola, Jennifer; Stuart, Ryan; Arango, Roberto; Leahey, Matt; Pavone, Robert; Provo, Andrew; Yasevac, Dan

    2005-07-12

    The majority of current portable orthotic devices and rehabilitative braces provide stability, apply precise pressure, or help maintain alignment of the joints with out the capability for real time monitoring of the patient's motions and forces and without the ability for real time adjustments of the applied forces and motions. Improved technology has allowed for advancements where these devices can be designed to apply a form of tension to resist motion of the joint. These devices induce quicker recovery and are more effective at restoring proper biomechanics and improving muscle function. However, their shortcoming is in their inability to be adjusted in real-time, which is the most ideal form of a device for rehabilitation. This introduces a second class of devices beyond passive orthotics. It is comprised of "active" or powered devices, and although more complicated in design, they are definitely the most versatile. An active or powered orthotic, usually employs some type of actuator(s). In this paper we present several new advancements in the area of smart rehabilitation devices that have been developed by the Northeastern University Robotics and Mechatronics Laboratory. They are all compact, wearable and portable devices and boast re-programmable, real time computer controlled functions as the central theme behind their operation. The sensory information and computer control of the three described devices make for highly efficient and versatile systems that represent a whole new breed in wearable rehabilitation devices. Their applications range from active-assistive rehabilitation to resistance exercise and even have applications in gait training. The three devices described are: a transportable continuous passive motion elbow device, a wearable electro-rheological fluid based knee resistance device, and a wearable electrical stimulation and biofeedback knee device. Laboratory tests of the devices demonstrated that they were able to meet their design

  2. Stretchable Organic Semiconductor Devices.

    Science.gov (United States)

    Qian, Yan; Zhang, Xinwen; Xie, Linghai; Qi, Dianpeng; Chandran, Bevita K; Chen, Xiaodong; Huang, Wei

    2016-11-01

    Stretchable electronics are essential for the development of intensely packed collapsible and portable electronics, wearable electronics, epidermal and bioimplanted electronics, 3D surface compliable devices, bionics, prosthesis, and robotics. However, most stretchable devices are currently based on inorganic electronics, whose high cost of fabrication and limited processing area make it difficult to produce inexpensive, large-area devices. Therefore, organic stretchable electronics are highly attractive due to many advantages over their inorganic counterparts, such as their light weight, flexibility, low cost and large-area solution-processing, the reproducible semiconductor resources, and the easy tuning of their properties via molecular tailoring. Among them, stretchable organic semiconductor devices have become a hot and fast-growing research field, in which great advances have been made in recent years. These fantastic advances are summarized here, focusing on stretchable organic field-effect transistors, light-emitting devices, solar cells, and memory devices.

  3. Controlling Smart Devices

    OpenAIRE

    Milanič, Matjaž

    2016-01-01

    Smart devices make our lives easier. However, by delegating more and more tasks to smart devices our wellbeing becomes dependent on their correct functioning. This creates a need for monitoring home devices in a similar way as businesses already do. The thesis describes the steps required for building a monitoring system suited for smart home monitoring, from the initial design to the final implementation of the solution. The goal was to create a user friendly monitoring system, designed as m...

  4. Sensor sentinel computing device

    Science.gov (United States)

    Damico, Joseph P.

    2016-08-02

    Technologies pertaining to authenticating data output by sensors in an industrial environment are described herein. A sensor sentinel computing device receives time-series data from a sensor by way of a wireline connection. The sensor sentinel computing device generates a validation signal that is a function of the time-series signal. The sensor sentinel computing device then transmits the validation signal to a programmable logic controller in the industrial environment.

  5. Establishment Registration & Device Listing

    Data.gov (United States)

    U.S. Department of Health & Human Services — This searchable database contains establishments (engaged in the manufacture, preparation, propagation, compounding, assembly, or processing of medical devices...

  6. Establishment Registration & Device Listing

    Data.gov (United States)

    U.S. Department of Health & Human Services — This searchable database contains establishments (engaged in the manufacture, preparation, propagation, compounding, assembly, or processing of medical devices...

  7. Simple piezoelectric translation device

    Science.gov (United States)

    Niedermann, Ph.; Emch, R.; Descouts, P.

    1988-02-01

    We describe a piezoelectric device which allows continuous movement and high-resolution micropositioning, without distance limitation. Both mechanical construction and the electronics for the device are very simple. The movement is obtained via a stick-slip mechanism, and steps as small as 10 nm are obtained. A displacement speed of 0.4 mm/s has been attained, and the device was capable of carrying several times its own weight, exerting a horizontal force, or climbing a plane inclined by 7°. Due to its compact construction, the device shows prospects for miniaturization.

  8. Virtual Training Devices Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Virtual Training Devices (VTD) Laboratory at the Life Cycle Software Engineering Center, Picatinny Arsenal, provides a software testing and support environment...

  9. Smart devices are different

    DEFF Research Database (Denmark)

    Stisen, Allan; Blunck, Henrik; Bhattacharya, Sourav

    2015-01-01

    The widespread presence of motion sensors on users' personal mobile devices has spawned a growing research interest in human activity recognition (HAR). However, when deployed at a large-scale, e.g., on multiple devices, the performance of a HAR system is often significantly lower than in reporte...

  10. Inverted organic photosensitive devices

    Energy Technology Data Exchange (ETDEWEB)

    Forrest, Stephen R.; Bailey-Salzman, Rhonda F.

    2016-12-06

    The present disclosure relates to organic photosensitive optoelectronic devices grown in an inverted manner. An inverted organic photosensitive optoelectronic device of the present disclosure comprises a reflective electrode, an organic donor-acceptor heterojunction over the reflective electrode, and a transparent electrode on top of the donor-acceptor heterojunction.

  11. Active devices for electronics

    CERN Document Server

    Sowa, Walter A

    1971-01-01

    An introduction to semiconductors ; the p-n junction ; the junction transistor ; electrical characteristics and ratings ; basic transistor amplifiers ; the field-effect transistor ; the unijunction transistor (UJT) ; the silicon controlled rectifier (SCR) ; the DIAC and TRIAC ; light operated devices ; integrated circuits (ICs) ; other solid-state devices of interest ; electron tubes.

  12. Metallic spintronic devices

    CERN Document Server

    Wang, Xiaobin

    2014-01-01

    Metallic Spintronic Devices provides a balanced view of the present state of the art of metallic spintronic devices, addressing both mainstream and emerging applications from magnetic tunneling junction sensors and spin torque oscillators to spin torque memory and logic. Featuring contributions from well-known and respected industrial and academic experts, this cutting-edge work not only presents the latest research and developments but also: Describes spintronic applications in current and future magnetic recording devicesDiscusses spin-transfer torque magnetoresistive random-access memory (STT-MRAM) device architectures and modelingExplores prospects of STT-MRAM scaling, such as detailed multilevel cell structure analysisInvestigates spintronic device write and read optimization in light of spintronic memristive effectsConsiders spintronic research directions based on yttrium iron garnet thin films, including spin pumping, magnetic proximity, spin hall, and spin Seebeck effectsProposes unique solutions for ...

  13. Fluidic nanotubes and devices

    Science.gov (United States)

    Yang, Peidong; He, Rongrui; Goldberger, Joshua; Fan, Rong; Wu, Yiying; Li, Deyu; Majumdar, Arun

    2008-04-08

    Fluidic nanotube devices are described in which a hydrophilic, non-carbon nanotube, has its ends fluidly coupled to reservoirs. Source and drain contacts are connected to opposing ends of the nanotube, or within each reservoir near the opening of the nanotube. The passage of molecular species can be sensed by measuring current flow (source-drain, ionic, or combination). The tube interior can be functionalized by joining binding molecules so that different molecular species can be sensed by detecting current changes. The nanotube may be a semiconductor, wherein a tubular transistor is formed. A gate electrode can be attached between source and drain to control current flow and ionic flow. By way of example an electrophoretic array embodiment is described, integrating MEMs switches. A variety of applications are described, such as: nanopores, nanocapillary devices, nanoelectrophoretic, DNA sequence detectors, immunosensors, thermoelectric devices, photonic devices, nanoscale fluidic bioseparators, imaging devices, and so forth.

  14. Device for cutting protrusions

    Science.gov (United States)

    Bzorgi, Fariborz M.

    2011-07-05

    An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

  15. Planar electrochemical device assembly

    Science.gov (United States)

    Jacobson, Craig P.; Visco, Steven J.; De Jonghe, Lutgard C.

    2007-06-19

    A pre-fabricated electrochemical device having a dense electrolyte disposed between an anode and a cathode preferably deposited as thin films is bonded to a porous electrically conductive support. A second porous electrically conductive support may be bonded to a counter electrode of the electrochemical device. Multiple electrochemical devices may be bonded in parallel to a single porous support, such as a perforated sheet to provide a planar array. Planar arrays may be arranged in a stacked interconnected array. A method of making a supported electrochemical device is disclosed wherein the method includes a step of bonding a pre-fabricated electrochemical device layer to an existing porous metal or porous metal alloy layer.

  16. Compound semiconductor device modelling

    CERN Document Server

    Miles, Robert

    1993-01-01

    Compound semiconductor devices form the foundation of solid-state microwave and optoelectronic technologies used in many modern communication systems. In common with their low frequency counterparts, these devices are often represented using equivalent circuit models, but it is often necessary to resort to physical models in order to gain insight into the detailed operation of compound semiconductor devices. Many of the earliest physical models were indeed developed to understand the 'unusual' phenomena which occur at high frequencies. Such was the case with the Gunn and IMPATI diodes, which led to an increased interest in using numerical simulation methods. Contemporary devices often have feature sizes so small that they no longer operate within the familiar traditional framework, and hot electron or even quantum­ mechanical models are required. The need for accurate and efficient models suitable for computer aided design has increased with the demand for a wider range of integrated devices for operation at...

  17. Screening of Native Rotifers, Hydra, Planaria for Deriving Aquatic Life Criteria%水生生物水质基准研究中轮虫、水螅、涡虫类受试生物的筛选

    Institute of Scientific and Technical Information of China (English)

    郑欣; 闫振广; 刘征涛; 刘婷婷; 王晓南; 武江越; 王伟莉

    2015-01-01

    轮虫、水螅、涡虫是水生生态系统的重要生物类群.因其对水体污染较敏感,所以对水生生物基准研究有重要意义.依据我国生物区系资料及毒性数据丰度,筛选出8种代表性本土轮虫、水螅、涡虫类生物.参照美国水生生物基准技术指南,搜集、筛选了这8种代表性生物的急性毒性数据,通过数据分析,筛选出对各物种毒性最大的污染物,主要包括重金属、农药、有机锡化物、表面活性剂、吡啶胺类杀菌剂.分析污染物的物种敏感度分布,依据累积概率对代表性生物的物种敏感性进行分类,结果为:萼花臂尾轮虫(Brachionus calyciflorus)、绿水螅(Hydrav iridissima)、普通水螅(Hydra vulgaris)对重金属铜的累积概率为6.5%、85%和10.4%,普通水螅(Hydra vulgaris)对重金属汞的累积概率为6.3%;龟甲轮虫(Keratella cochlearis)和四齿腔轮虫(Lecane quadridentata)对五氯酚钠的累积概率为5.1%和7.6%;褐水螅(Hydrao ligactis)和绿水螅(Hydra viridissima)对三丁基氧化锡的累积概率为6.9%和13.8%,萼花臂尾轮虫(Brachionus calyciflorus)对氟啶胺的累积概率为6.7%,日本三角涡虫(Dugesia japonica)对四氯化碳、十二烷基苯磺酸钠的累积概率分别为6.7%和7.1%.上述结果表明:萼花臂尾轮虫、绿水螅对重金属铜敏感;普通水螅对重金属铜和汞敏感;龟甲轮虫和四齿腔轮虫对农药敏感;褐水螅和绿水螅对有机锡化物敏感;萼花臂尾轮虫对吡啶胺类杀菌剂敏感;日本三角涡虫对四氯化碳、表面活性剂敏感.这7种代表性生物可作为相关污染物的水生生物基准受试物种.

  18. Lecture notes on: Electrical theory behind the measurement of body fluids with bioimpedance spectroscopy (BIS):with applications to the measurement device 4200 HYDRA ECF/ICF Bio-Impedance Spectrum Analyzer from Xitron Technologies

    OpenAIRE

    2008-01-01

    Teksten beskriver, hvordan volumen af kropsvæsker kan måles/estimeres med teknikken bio-impedans-spektroskopi (BIS). De første kapitler forudsætter kun lidt eller ingen teknisk/matematisk viden og kan forhåbentlig læses af enhver, som er interesseret i teknikken. Senere kapitler bliver mere tekniske, men indledes med opsummeringer af konklusionerne. Meningen med noterne er at give en forståelse af teknikken, dens forudsætninger og dens begrænsninger. Der tages udgangspunkt i et konkret appara...

  19. Digital communication device

    DEFF Research Database (Denmark)

    2005-01-01

    The invention concerns a digital communication device like a hearing aid or a headset. The hearing aid or headset has a power supply, a signal processing device, means for receiving a wireless signal and a receiver or loudspeaker, which produces an audio signal based on a modulated pulsed signal...... point is provided which is in electrical contact with the metal of the metal box and whereby this third connection point is connected to the electric circuitry of the communication device at a point having a stable and well defined electrical potential. In this way the electro-and magnetic radiation...

  20. Output hardcopy devices

    CERN Document Server

    Durbeck, Robert

    1988-01-01

    Output Hardcopy Devices provides a technical summary of computer output hardcopy devices such as plotters, computer output printers, and CRT generated hardcopy. Important related technical areas such as papers, ribbons and inks, color techniques, controllers, and character fonts are also covered. Emphasis is on techniques primarily associated with printing, as well as the plotting capabilities of printing devices that can be effectively used for computer graphics in addition to their various printing functions. Comprised of 19 chapters, this volume begins with an introduction to vector and ras

  1. Emission rate measuring device

    Science.gov (United States)

    Luckat, S.

    1980-09-01

    The development and application of an emission rate measuring device for gaseous components is explored. The device contains absorption fluid from a supply container that moistens a cylindrical paper sleeve. A newer model is provided with a direct current motor requiring less electricity than an older model. The hose pump is modified to avoid changing it and the filter sleeve is fastened more securely to the distributor head. Application of the measuring devices is discussed, particularly at the Cologne Cathedral, where damage to the stone is observed.

  2. Nanoelectronic device applications handbook

    CERN Document Server

    Morris, James E

    2013-01-01

    Nanoelectronic Device Applications Handbook gives a comprehensive snapshot of the state of the art in nanodevices for nanoelectronics applications. Combining breadth and depth, the book includes 68 chapters on topics that range from nano-scaled complementary metal-oxide-semiconductor (CMOS) devices through recent developments in nano capacitors and AlGaAs/GaAs devices. The contributors are world-renowned experts from academia and industry from around the globe. The handbook explores current research into potentially disruptive technologies for a post-CMOS world.These include: Nanoscale advance

  3. Compound semiconductor device physics

    CERN Document Server

    Tiwari, Sandip

    2013-01-01

    This book provides one of the most rigorous treatments of compound semiconductor device physics yet published. A complete understanding of modern devices requires a working knowledge of low-dimensional physics, the use of statistical methods, and the use of one-, two-, and three-dimensional analytical and numerical analysis techniques. With its systematic and detailed**discussion of these topics, this book is ideal for both the researcher and the student. Although the emphasis of this text is on compound semiconductor devices, many of the principles discussed will also be useful to those inter

  4. Powering biomedical devices

    CERN Document Server

    Romero, Edwar

    2013-01-01

    From exoskeletons to neural implants, biomedical devices are no less than life-changing. Compact and constant power sources are necessary to keep these devices running efficiently. Edwar Romero's Powering Biomedical Devices reviews the background, current technologies, and possible future developments of these power sources, examining not only the types of biomedical power sources available (macro, mini, MEMS, and nano), but also what they power (such as prostheses, insulin pumps, and muscular and neural stimulators), and how they work (covering batteries, biofluids, kinetic and ther

  5. Fundamentals of semiconductor devices

    CERN Document Server

    Lindmayer, Joseph

    1965-01-01

    Semiconductor properties ; semiconductor junctions or diodes ; transistor fundamentals ; inhomogeneous impurity distributions, drift or graded-base transistors ; high-frequency properties of transistors ; band structure of semiconductors ; high current densities and mechanisms of carrier transport ; transistor transient response and recombination processes ; surfaces, field-effect transistors, and composite junctions ; additional semiconductor characteristics ; additional semiconductor devices and microcircuits ; more metal, insulator, and semiconductor combinations for devices ; four-pole parameters and configuration rotation ; four-poles of combined networks and devices ; equivalent circuits ; the error function and its properties ; Fermi-Dirac statistics ; useful physical constants.

  6. Physics of photonic devices

    CERN Document Server

    Chuang, Shun Lien

    2009-01-01

    The most up-to-date book available on the physics of photonic devices This new edition of Physics of Photonic Devices incorporates significant advancements in the field of photonics that have occurred since publication of the first edition (Physics of Optoelectronic Devices). New topics covered include a brief history of the invention of semiconductor lasers, the Lorentz dipole method and metal plasmas, matrix optics, surface plasma waveguides, optical ring resonators, integrated electroabsorption modulator-lasers, and solar cells. It also introduces exciting new fields of research such as:

  7. Marine Sanitation Devices (MSDs)

    Science.gov (United States)

    Marine sanitation devices treat or retain sewage from vessels, and have performance standards set by the EPA. This page provides information on MSDs, including who must use an MSD, states' roles, types of MSDs and standards.

  8. MDR (Medical Device Reporting)

    Data.gov (United States)

    U.S. Department of Health & Human Services — This database allows you to search the CDRH's database information on medical devices which may have malfunctioned or caused a death or serious injury during the...

  9. Devices for hearing loss

    Science.gov (United States)

    ... medlineplus.gov/ency/patientinstructions/000359.htm Devices for hearing loss To use the sharing features on this page, please enable JavaScript. If you are living with hearing loss , you know that it takes extra effort to ...

  10. Water-walking devices

    Science.gov (United States)

    Hu, David L.; Prakash, Manu; Chan, Brian; Bush, John W. M.

    We report recent efforts in the design and construction of water-walking machines inspired by insects and spiders. The fundamental physical constraints on the size, proportion and dynamics of natural water-walkers are enumerated and used as design criteria for analogous mechanical devices. We report devices capable of rowing along the surface, leaping off the surface and climbing menisci by deforming the free surface. The most critical design constraint is that the devices be lightweight and non-wetting. Microscale manufacturing techniques and new man-made materials such as hydrophobic coatings and thermally actuated wires are implemented. Using highspeed cinematography and flow visualization, we compare the functionality and dynamics of our devices with those of their natural counterparts.

  11. Development of electrochromic devices.

    Science.gov (United States)

    Pawlicka, A

    2009-01-01

    Electrochromic devices (ECD) are systems of considerable commercial interest due to their controllable transmission, absorption and/or reflectance. For instance, these devices are mainly applied to glare attenuation in automobile rearview mirrors and also in some smart windows that can regulate the solar gains of buildings. Other possible applications of ECDs include solar cells, small- and large-area flat panel displays, and frozen food monitoring and document authentication also are of great interest. Over the past 20 years almost 1000 patents and 1500 papers in journals and proceedings have been published with the key words "electrochromic windows". Most of these documents report on materials for electrochromic devices and only some of them about complete electrochromic devices. This paper describes the first patents and some of the recent ones on ECDs, whose development is possible due to the advances in nanotechnology.

  12. "Centripede"-measuring device

    CERN Multimedia

    CERN PhotoLab

    1973-01-01

    "Centripede"-measuring device for the geometrical pole shape of the quadrupoles, developed by the electronics and mechanics section of the Survey Group. The black box contains a precision clinometer, which gives the transversal tilt of the reference plane.

  13. Thermoelectric materials and devices

    Science.gov (United States)

    Park, Yeonjoon (Inventor); Choi, Sang H. (Inventor); King, Glen C. (Inventor); Elliott, James R. (Inventor); Talcott, Noel A. (Inventor)

    2011-01-01

    New thermoelectric materials comprise highly [111]-oriented twinned group IV alloys on the basal plane of trigonal substrates, which exhibit a high thermoelectric figure of merit and good material performance, and devices made with these materials.

  14. Authenticated sensor interface device

    Energy Technology Data Exchange (ETDEWEB)

    Coleman, Jody Rustyn; Poland, Richard W.

    2016-10-18

    A system and method for the secure storage and transmission of data is provided. A data aggregate device can be configured to receive secure data from a data source, such as a sensor, and encrypt the secure data using a suitable encryption technique, such as a shared private key technique, a public key encryption technique, a Diffie-Hellman key exchange technique, or other suitable encryption technique. The encrypted secure data can be provided from the data aggregate device to different remote devices over a plurality of segregated or isolated data paths. Each of the isolated data paths can include an optoisolator that is configured to provide one-way transmission of the encrypted secure data from the data aggregate device over the isolated data path. External data can be received through a secure data filter which, by validating the external data, allows for key exchange and other various adjustments from an external source.

  15. Geometry and Cloaking Devices

    Science.gov (United States)

    Ochiai, T.; Nacher, J. C.

    2011-09-01

    Recently, the application of geometry and conformal mappings to artificial materials (metamaterials) has attracted the attention in various research communities. These materials, characterized by a unique man-made structure, have unusual optical properties, which materials found in nature do not exhibit. By applying the geometry and conformal mappings theory to metamaterial science, it may be possible to realize so-called "Harry Potter cloaking device". Although such a device is still in the science fiction realm, several works have shown that by using such metamaterials it may be possible to control the direction of the electromagnetic field at will. We could then make an object hidden inside of a cloaking device. Here, we will explain how to design invisibility device using differential geometry and conformal mappings.

  16. Commercialization of microfluidic devices.

    Science.gov (United States)

    Volpatti, Lisa R; Yetisen, Ali K

    2014-07-01

    Microfluidic devices offer automation and high-throughput screening, and operate at low volumes of consumables. Although microfluidics has the potential to reduce turnaround times and costs for analytical devices, particularly in medical, veterinary, and environmental sciences, this enabling technology has had limited diffusion into consumer products. This article analyzes the microfluidics market, identifies issues, and highlights successful commercialization strategies. Addressing niche markets and establishing compatibility with existing workflows will accelerate market penetration. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Technology of Quantum Devices

    CERN Document Server

    Razeghi, Manijeh

    2010-01-01

    Technology of Quantum Devices offers a multi-disciplinary overview of solid state physics, photonics and semiconductor growth and fabrication. Readers will find up-to-date coverage of compound semiconductors, crystal growth techniques, silicon and compound semiconductor device technology, in addition to intersubband and semiconductor lasers. Recent findings in quantum tunneling transport, quantum well intersubband photodetectors (QWIP) and quantum dot photodetectors (QWDIP) are described, along with a thorough set of sample problems.

  18. Bipolar intimal tacking device.

    Science.gov (United States)

    Gross, C E; Williams, G

    1984-09-01

    A bipolar electrocoagulating device has been designed to thermally tack arterial intimal flaps to the artery wall. The device was tested on intimal flaps created in the rabbit descending aorta. The vascular segments were tested for patency and the thermal tack points were examined on a scanning electron microscope. The tack points were shown to be of sufficient tensile strength and to have minimal thrombogenicity.

  19. Nanoplasmonics advanced device applications

    CERN Document Server

    Chon, James W M

    2013-01-01

    Focusing on control and manipulation of plasmons at nanometer dimensions, nanoplasmonics combines the strength of electronics and photonics, and is predicted to replace existing integrated circuits and photonic devices. It is one of the fastest growing fields of science, with applications in telecommunication, consumer electronics, data storage, medical diagnostics, and energy.Nanoplasmonics: Advanced Device Applications provides a scientific and technological background of a particular nanoplasmonic application and outlines the progress and challenges of the application. It reviews the latest

  20. Communications for Wearable Devices

    OpenAIRE

    Tabibu, Shivram

    2017-01-01

    Wearable devices are transforming computing and the human-computer interaction and they are a primary means for motion recognition of reflexive systems. We review basic wearable deployments and their open wireless communications. An algorithm that uses accelerometer data to provide a control and communication signal is described. Challenges in the further deployment of wearable device in the field of body area network and biometric verification are discussed.

  1. Smart portable rehabilitation devices

    OpenAIRE

    Leahey Matt; Arango Roberto; Stuart Ryan; Prugnarola Jennifer; Pelletier Philip; Jensen Katherine; Danaher Gil; Weinberg Brian; Nikitczuk Jason; Mavroidis Constantinos; Pavone Robert; Provo Andrew; Yasevac Dan

    2005-01-01

    Abstract Background The majority of current portable orthotic devices and rehabilitative braces provide stability, apply precise pressure, or help maintain alignment of the joints with out the capability for real time monitoring of the patient's motions and forces and without the ability for real time adjustments of the applied forces and motions. Improved technology has allowed for advancements where these devices can be designed to apply a form of tension to resist motion of the joint. Thes...

  2. Nitinol Temperature Monitoring Devices

    Science.gov (United States)

    1976-01-09

    AD-A021 578 NITINOL TEMPERATURE MONITORING DEVICES William J. Buehler, et al Naval Surface Weapons Center Silver Spring, Maryland 9 January 1976...LABORATORY S NITINOL TEMPERATURE MONITORING DEVICES 9 JANUARY 1976 NAVAL SURFACE WEAPONS CENTER WHITE OAK LABORATORY SILVER SPRING, MARYLAND 20910 * Approved...GOVT ACCESSION NO. 3. RECIPIIENT’S CATALOG NUMBER NSWC/WOL/TR 75-140 ____ ______ 4 TITLE (and Subtitle) 5. TYPE OF REPCRT & PERIOD COVERED Nitinol

  3. Intrauterine devices containing progesterone.

    Science.gov (United States)

    Murad, F

    1977-05-01

    Characteristics of progesterone-releasing IUDs are reported. At present, the only progesterone-containing IUD on the market is Progestasert, a T-shaped ethylene vinyl acetate copolymer device containing 38 mg progesterone in silicone. The device releases approximately 65 mcg/day into the uterine cavity over the course of 1-year. The device does not alter pituitary function or ovulation, nor does it depend on a local mechanical effect. Rather, it may exert its effect by inhibiting sperm capacitation or survival, or it may prevent nidation by alterning the endometrium. The reported pregnancy rate for Progestasert is 1.9% in parous women and 2.5% in nulliparous women. This efficacy rate is similar to that for other IUDs and low-dose progestin-only oral contraceptives. Breakthrough bleeding is the most common side effect, and perhaps 10-15% of the acceptors will have the device removed for either bleeding, pain, or infection. The rate of spontaneous expulsion of the device is about 3-8%. It is recommended that the device be inserted during or shortly after the menstrual period.

  4. Ventricular Assist Device Support

    Science.gov (United States)

    Fasseas, Panayotis; Kutalek, Steven P.; Samuels, Fania L.; Holmes, Elena C.; Samuels, Louis E.

    2002-01-01

    We describe herein the cases of 2 patients who had ventricular arrhythmias. In one, a short-term biventricular assist device, the ABIOMED BVS 5000, was placed because the patient had sustained ventricular tachycardia and could not be weaned from cardiopulmonary bypass. Excellent hemodynamic support was maintained for several days while the antiarrhythmic therapy was maximized. Sinus rhythm was restored, and the patient was successfully weaned from the ventricular assist device. However, the substrate for the arrhythmia persisted, and a recurrence, 1 week later, resulted in the patient's death. In the 2nd patient, the use of an implantable left ventricular assist device was successful in temporarily alleviating the ventricular tachycardia associated with ischemic cardiomyopathy. However, after 2 days of device assistance, the patient experienced a recurrence of the tachycardia, which degenerated into ventricular fibrillation with a marked deterioration in the patient's hemodynamics. The arrhythmia persisted despite multiple attempts at external cardioversion, and internal cardioversion and placement of an automatic implantable cardioverter-defibrillator were necessary. This treatment, along with repeated boluses of amiodarone, led to successful suppression of the arrhythmias, and the patient eventually underwent transplantation. The mechanical hemodynamic support of the circulation by ventricular assist devices was effective in supporting these 2 patients who had sustained ventricular arrhythmias. (Tex Heart Inst J 2002;29:33–6) PMID:11995847

  5. Physics of semiconductor devices

    CERN Document Server

    Rudan, Massimo

    2015-01-01

    This book describes the basic physics of semiconductors, including the hierarchy of transport models, and connects the theory with the functioning of actual semiconductor devices.  Details are worked out carefully and derived from the basic physics, while keeping the internal coherence of the concepts and explaining various levels of approximation. Examples are based on silicon due to its industrial importance. Several chapters are included that provide the reader with the quantum-mechanical concepts necessary for understanding the transport properties of crystals. The behavior of crystals incorporating a position-dependent impurity distribution is described, and the different hierarchical transport models for semiconductor devices are derived (from the Boltzmann transport equation to the hydrodynamic and drift-diffusion models). The transport models are then applied to a detailed description of the main semiconductor-device architectures (bipolar, MOS). The final chapters are devoted to the description of s...

  6. Foreign Body Extraction Device

    Directory of Open Access Journals (Sweden)

    A. Lavy

    1999-01-01

    Full Text Available Foreign bodies in the gastrointestinal tract are common. Mostly they are swallowed accidentally by children but also by adults. When round and slippery, foreign bodies cause a technical problem for removal. After several days in the stomach they are covered with mucus and extraction becomes even harder. There are various devices designed for use through the flexible endoscope for grasping foreign bodies but due to the great variety of objects, one may face a real problem while trying to remove them. We faced a challenge in a woman who underwent vertical band gastroplasty and was obstructed by a round and slippery hazelnut. We managed to remove the nut using a simple homemade device. This device is easy to make, cheap, and simple to use and maybe useful for various foreign bodies.

  7. Biochip scanner device

    Energy Technology Data Exchange (ETDEWEB)

    Perov, Alexander (Troitsk, RU); Belgovskiy, Alexander I. (Mayfield Heights, OH); Mirzabekov, Andrei D. (Darien, IL)

    2001-01-01

    A biochip scanner device used to detect and acquire fluorescence signal data from biological microchips or biochips and method of use are provided. The biochip scanner device includes a laser for emitting a laser beam. A modulator, such as an optical chopper modulates the laser beam. A scanning head receives the modulated laser beam and a scanning mechanics coupled to the scanning head moves the scanning head relative to the biochip. An optical fiber delivers the modulated laser beam to the scanning head. The scanning head collects the fluorescence light from the biochip, launches it into the same optical fiber, which delivers the fluorescence into a photodetector, such as a photodiode. The biochip scanner device is used in a row scanning method to scan selected rows of the biochip with the laser beam size matching the size of the immobilization site.

  8. Electronic devices and circuits

    CERN Document Server

    Pridham, Gordon John

    1968-01-01

    Electronic Devices and Circuits, Volume 1 deals with the design and applications of electronic devices and circuits such as passive components, diodes, triodes and transistors, rectification and power supplies, amplifying circuits, electronic instruments, and oscillators. These topics are supported with introductory network theory and physics. This volume is comprised of nine chapters and begins by explaining the operation of resistive, inductive, and capacitive elements in direct and alternating current circuits. The theory for some of the expressions quoted in later chapters is presented. Th

  9. Phononic crystal devices

    Science.gov (United States)

    El-Kady, Ihab F.; Olsson, Roy H.

    2012-01-10

    Phononic crystals that have the ability to modify and control the thermal black body phonon distribution and the phonon component of heat transport in a solid. In particular, the thermal conductivity and heat capacity can be modified by altering the phonon density of states in a phononic crystal. The present invention is directed to phononic crystal devices and materials such as radio frequency (RF) tags powered from ambient heat, dielectrics with extremely low thermal conductivity, thermoelectric materials with a higher ratio of electrical-to-thermal conductivity, materials with phononically engineered heat capacity, phononic crystal waveguides that enable accelerated cooling, and a variety of low temperature application devices.

  10. Preventing medical device recalls

    CERN Document Server

    Raheja, Dev

    2014-01-01

    Introduction to Medical Device RequirementsIntroductionThe ChallengesSources of ErrorsUnderstanding the Science of Safety     Overview of FDA Quality System Regulation     Overview of Risk Management Standard ISO 14971     Overview of FDA Device Approval Process     Overview of Regulatory Requirements for Clinical TrialsSummaryReferencesPreventing Recalls during Specification WritingIntroductionConduct Requirements Analysis to Identify Missing RequirementsSpecifications for Safety, Durability, and

  11. INLET STRATIFICATION DEVICE

    DEFF Research Database (Denmark)

    2006-01-01

    An inlet stratification device (5) for a circuit circulating a fluid through a tank (1 ) and for providing and maintaining stratification of the fluid in the tank (1 ). The stratification de- vice (5) is arranged vertically in the tank (1) and comprises an inlet pipe (6) being at least partially...... formed of a flexible porous material and having an inlet (19) and outlets formed of the pores of the porous material. The stratification device (5) further comprises at least one outer pipe (7) surrounding the inlet pipe (6) in spaced relationship thereto and being at least partially formed of a porous...

  12. Microfluidic Cell Culture Device

    Science.gov (United States)

    Takayama, Shuichi (Inventor); Cabrera, Lourdes Marcella (Inventor); Heo, Yun Seok (Inventor); Smith, Gary Daniel (Inventor)

    2014-01-01

    Microfluidic devices for cell culturing and methods for using the same are disclosed. One device includes a substrate and membrane. The substrate includes a reservoir in fluid communication with a passage. A bio-compatible fluid may be added to the reservoir and passage. The reservoir is configured to receive and retain at least a portion of a cell mass. The membrane acts as a barrier to evaporation of the bio-compatible fluid from the passage. A cover fluid may be added to cover the bio-compatible fluid to prevent evaporation of the bio-compatible fluid.

  13. Asphaltene based photovoltaic devices

    Energy Technology Data Exchange (ETDEWEB)

    Chianelli, Russell R.; Castillo, Karina; Gupta, Vipin; Qudah, Ali M.; Torres, Brenda; Abujnah, Rajib E.

    2016-03-22

    Photovoltaic devices and methods of making the same, are disclosed herein. The cell comprises a photovoltaic device that comprises a first electrically conductive layer comprising a photo-sensitized electrode; at least one photoelectrochemical layer comprising metal-oxide particles, an electrolyte solution comprising at least one asphaltene fraction, wherein the metal-oxide particles are optionally dispersed in a surfactant; and a second electrically conductive layer comprising a counter-electrode, wherein the second electrically conductive layer comprises one or more conductive elements comprising carbon, graphite, soot, carbon allotropes or any combinations thereof.

  14. Nano devices and sensors

    CERN Document Server

    Liaw, Shien-Kuei; Chung, Yung-Hui

    2016-01-01

    This volume on semiconductor devices focuses on such topics as nano-imprinting, lithography, nanowire charge-trapping, thermo-stability in nanowires, nano-electrodes, and voltage and materials used for fabricating and improving electrical characteristics of nano-materials.

  15. Optical switching device

    NARCIS (Netherlands)

    Broeder, F.J.A. den; Hanzen, R.M.N.; Duine, P.A.; Jungblut, R.M.; Draijer, C.; Roozeboom, F.; Sluis, P. van der

    2000-01-01

    A description is given of an optical switching device (1) comprising a transparent substrate (3), a switching film (5) of a hydride compound of a trivalent transition or rare earth metal having a thickness of 300 nm, and a palladium capping layer (7) having a thickness of 30 nm. The capping layer is

  16. Color identification testing device

    Science.gov (United States)

    Brawner, E. L.; Martin, R.; Pate, W.

    1970-01-01

    Testing device, which determines ability of a technician to identify color-coded electric wires, is superior to standard color blindness tests. It tests speed of wire selection, detects partial color blindness, allows rapid testing, and may be administered by a color blind person.

  17. Air Stable Photovoltaic Device

    DEFF Research Database (Denmark)

    2010-01-01

    A method of forming a conducting polymer based photovoltaic device comprising the steps of : (a) providing a transparent first electrode; (b) providing the transparent first electrode with a layer of metal oxide nanoparticles, wherein the metal oxide is selected from the group consisting of : TiO...

  18. Device Oriented Project Controller

    Energy Technology Data Exchange (ETDEWEB)

    Dalesio, Leo; Kraimer, Martin

    2013-11-20

    This proposal is directed at the issue of developing control systems for very large HEP projects. A de-facto standard in accelerator control is the Experimental Physics and Industrial Control System (EPICS), which has been applied successfully to many physics projects. EPICS is a channel based system that requires that each channel of each device be configured and controlled. In Phase I, the feasibility of a device oriented extension to the distributed channel database was demonstrated by prototyping a device aware version of an EPICS I/O controller that functions with the current version of the channel access communication protocol. Extensions have been made to the grammar to define the database. Only a multi-stage position controller with limit switches was developed in the demonstration, but the grammar should support a full range of functional record types. In phase II, a full set of record types will be developed to support all existing record types, a set of process control functions for closed loop control, and support for experimental beam line control. A tool to configure these records will be developed. A communication protocol will be developed or extensions will be made to Channel Access to support introspection of components of a device. Performance bench marks will be made on both communication protocol and the database. After these records and performance tests are under way, a second of the grammar will be undertaken.

  19. Container Monitoring Device (case)

    NARCIS (Netherlands)

    Maas, A.; Ruijsbroek, W.G.J.

    2015-01-01

    Stage Gate 11 is een bedrijf dat technologische innovaties naar de markt brengt. De drie ondernemers hebben een nieuw product ontwikkeld, de Container Monitoring Device, een product dat stalen containers ‘smart’ maakt door er allerlei sensoren aan te koppelen. Maar waar ligt precies de toegevoegde w

  20. The missing intrauterine device

    Directory of Open Access Journals (Sweden)

    Rajesh Devassy

    2016-10-01

    Full Text Available The Intrauterine Contraceptive Device (IUD is an acceptable and common form of contraception worldwide. The objective of this study was to report the case of an asymptomatic missing intrauterine contraceptive (IUD inserted to prevent intrauterine adhesions after synechiolysis. A patient presented with missing IUD threads. Ultrasound of the pelvis showed an empty uterine cavity with the missing IUD probably anterior to the uterus. We present a stepwise approach in the management of the and ldquo;lost IUD and rdquo;, where the strings of the device are not visible at the time of speculum examination. We suggest first determining sonographically whether the IUD is within the cavity. If it is in situ, options for retrieval are including hysteroscopic retrieval. If the IUD is not within the cavity, X-rays are recommended. The device will not be present on X-ray if expulsion has occurred. If the device is present on the X-ray, cystoscopic or laparoscopic retrieval is required. IUD-providers should not only screen potential users and insert IUD correctly, but also ensure adequate follow-up with localization. [Int J Reprod Contracept Obstet Gynecol 2016; 5(10.000: 3587-3589

  1. A Medical Delivery Device

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to a medical delivery device comprising at least two membrane electrode assembly units each of which comprises three layers: an upper and a lower electrode and a selective ionic conductive membrane provided there-between. At least one of the three layers are shared...

  2. Alerts and Notices (Devices)

    Science.gov (United States)

    ... Safety Communication 01/13/17 Safety Concerns with Implantable Infusion Pumps in the Magnetic Resonance (MR) Environment: FDA Safety Communication 01/11/17 Cybersecurity Vulnerabilities Identified in St. Jude Medical's Implantable Cardiac Devices and Merlin@home Transmitter: FDA Safety ...

  3. XY displacement device

    NARCIS (Netherlands)

    Heerens, W.C.; Laham, C.D.; Holman, A.E.

    1997-01-01

    An XY-displacement device (1) with a four-fold symmetry comprises a reference frame (10); an object mount (20) for holding an object (22) to be displaced; an X-manipulator (100) coupled between the reference frame (10) and the object mount (20), which provides a rigid coupling between the object mou

  4. Complex Materials and Devices

    Science.gov (United States)

    2013-03-07

    Disruptive Basic Research Areas” – Metamaterials and Plasmonics – Quantum Information Science – Cognitive Neuroscience – Nanoscience and...Sayir, Fuller) Bio-Sensing of Magnetic Fields (Larkin, Bradshaw, Curcic, DeLong 2D Materials & Devices Beyond Graphene (Hwang, Pomrenke, Harrison

  5. A Medical Delivery Device

    DEFF Research Database (Denmark)

    2010-01-01

    The present invention relates to a medical delivery device comprising at least two membrane electrode assembly units each of which comprises three layers: an upper and a lower electrode and a selective ionic conductive membrane provided there-between. At least one of the three layers are shared...

  6. Discourse Devices in Telugu

    Science.gov (United States)

    Rani, A. Usha

    2010-01-01

    The aim of this paper is to discuss some of the productive discourse devices and markers noted in 50 spoken narratives elicited from Telugu native speakers. Since most of them are college students and residents of Hyderabad, they are also exposed to English as well as Hindi-Urdu (Dakkhini). After presenting certain salient features of Telugu…

  7. Projection and registration device

    NARCIS (Netherlands)

    Verlinden, J.C.

    2009-01-01

    A projection and recording device, provided with a processing and control unit, a memory for recording images and other data, an input/output interface, a controllable camera, a touch screen for the input and display of data and images, a position determining system for determining the position of a

  8. Solid-State Devices.

    Science.gov (United States)

    Sutliff, Ronald D.; And Others

    This self-study course is designed to familiarize Marine Corps enlisted personnel with the principles of solid-state devices and their functions. The course contains four study units. Each study unit begins with a general objective, which is a statement of what the student should learn from the unit. The study units are divided into numbered work…

  9. Electronics Devices and Materials

    Science.gov (United States)

    2008-03-17

    should be immae that nobw0sthtandirV any other projieion of law, no person shell be su*ect tD any penalty for faling to cornply with a oolk rd -in 0...a Lehighton instrument. I The 8 wafers with GaN devices were sawn and are ready for annealing. Additional training at NSI was performed on thermal

  10. Medical device regulation for manufacturers.

    Science.gov (United States)

    McAllister, P; Jeswiet, J

    2003-01-01

    Manufacturers of medical devices are held to a higher standard than manufacturers of many other products due to the potential severity of the consequences of introducing inferior or unsafe products to the market-place. In Canada, the medical device industry is regulated by Health Canada under the Medical Device Regulations of the Food and Drug Act. The Medical Device Regulations define requirements of medical device design, development and manufacture to ensure that products reaching the public are safe and effective. Health Canada also requires that medical device manufacturers maintain distribution records to ensure that devices can be traced to the source and consumers can be contacted successfully in the event that a device is recalled. Medical devices exported from Canada must be compliant with the regulations of the country of import. The Canadian Medical Device Regulations were based on the Medical Device Directives of the European Union thus facilitating approval of Canadian devices for the European market. The United States Food and Drug Administration has separate and distinct requirements for safety and quality of medical devices. While effort has been made to facilitate approval and trade of Canadian medical devices in the United States and the European Union, obtaining approval from multiple regulatory bodies can result in increased device development time and cost. The Global Harmonization Task Force is an organization composed of members from Japanese, Australian, European, Canadian and American medical device regulatory bodies. This organization was formed with the objective of harmonizing medical device regulations in an effort to facilitate international trade and standardize the quality of medical devices available to all countries. This paper discusses the requirements that must be met by manufacturers when designing and manufacturing medical devices.

  11. Microelectromechanical reprogrammable logic device

    Science.gov (United States)

    Hafiz, M. A. A.; Kosuru, L.; Younis, M. I.

    2016-03-01

    In modern computing, the Boolean logic operations are set by interconnect schemes between the transistors. As the miniaturization in the component level to enhance the computational power is rapidly approaching physical limits, alternative computing methods are vigorously pursued. One of the desired aspects in the future computing approaches is the provision for hardware reconfigurability at run time to allow enhanced functionality. Here we demonstrate a reprogrammable logic device based on the electrothermal frequency modulation scheme of a single microelectromechanical resonator, capable of performing all the fundamental 2-bit logic functions as well as n-bit logic operations. Logic functions are performed by actively tuning the linear resonance frequency of the resonator operated at room temperature and under modest vacuum conditions, reprogrammable by the a.c.-driving frequency. The device is fabricated using complementary metal oxide semiconductor compatible mass fabrication process, suitable for on-chip integration, and promises an alternative electromechanical computing scheme.

  12. Thin film device applications

    CERN Document Server

    Kaur, Inderjeet

    1983-01-01

    Two-dimensional materials created ab initio by the process of condensation of atoms, molecules, or ions, called thin films, have unique properties significantly different from the corresponding bulk materials as a result of their physical dimensions, geometry, nonequilibrium microstructure, and metallurgy. Further, these characteristic features of thin films can be drasti­ cally modified and tailored to obtain the desired and required physical characteristics. These features form the basis of development of a host of extraordinary active and passive thin film device applications in the last two decades. On the one extreme, these applications are in the submicron dimensions in such areas as very large scale integration (VLSI), Josephson junction quantum interference devices, magnetic bubbles, and integrated optics. On the other extreme, large-area thin films are being used as selective coatings for solar thermal conversion, solar cells for photovoltaic conver­ sion, and protection and passivating layers. Ind...

  13. Inlet stratification device

    DEFF Research Database (Denmark)

    2014-01-01

    ) with an inlet passage way (16). The upper end of the inlet pipe (6) is connected with a top cap (9). The top cap (9) and the bottom cap (10) are mutually connected by means of a wire (8) and the top cap (9) is configured as a floating device providing a buoyancy force larger than the downwardly directed force......An inlet stratification (5) is adapted to be arranged vertically in a tank (1) during operation. The stratification device (5) comprises an inlet pipe (6) formed of a flexible porous material and having a lower and upper end. The lower end of the inlet pipe (6) is connected to a bottom cap (10...

  14. Microwave Magnetoelectric Devices

    Directory of Open Access Journals (Sweden)

    A. S. Tatarenko

    2012-01-01

    Full Text Available Tunable microwave magnetoelectric devices based on layered ferrite-ferroelectric structures are described. The theory and experiment for attenuator, band-pass filter and phase shifter are presented. Tunability of the ME devices characteristics can be executed by application of an electric field. This electric tuning is relatively fast and is not power-consuming. The attenuator insertion losses vary from 26 dB to 2 dB at frequency 7251 MHz. The tuning range of 25 MHz of band-pass filter at frequency 7360 MHz was obtained. A maximum phase shift of 30–40 degree at the frequency region 6–9 GHz was obtained.

  15. Surface Acoustic Wave Devices

    DEFF Research Database (Denmark)

    Dühring, Maria Bayard

    of a Mach-Zehnder interferometer (MZI). This is an optical device consisting if one waveguide that is split into two waveguide arms which are assembled again later on. By applying the mechanical field from a SAW the light in the two arms can be modulated and interfere constructively and destructively......The work of this project is concerned with the simulation of surface acoustic waves (SAW) and topology optimization of SAW devices. SAWs are elastic vibrations that propagate along a material surface and are extensively used in electromechanical filters and resonators in telecommunication. A new...... application is modulation of optical waves in waveguides. This presentation elaborates on how a SAW is generated by interdigital transducers using a 2D model of a piezoelectric, inhomogeneous material implemented in the high-level programming language Comsol Multiphysics. The SAW is send through a model...

  16. Plastic photovoltaic devices

    Directory of Open Access Journals (Sweden)

    Niyazi Serdar Sariciftci

    2004-09-01

    Full Text Available The development of organic, polymer-based photovoltaic elements has introduced the possibility of obtaining cheap and easy-to-produce energy from light. Photoinduced electron transfer from donor-type semiconducting polymers onto acceptor-type polymers or molecules, such as C60, is the basic phenomenon utilized in these photovoltaic devices. This process mimics the early photo-effects in natural photosynthesis. The polymeric semiconductors combine the photoelectrical properties of inorganic semiconductors with the large-scale, low-cost technology of polymeric ‘plastic’ materials. To date, devices with power conversion efficiencies of ∼5% have been reported. Several companies and research institutions are focusing on this field now, making power conversion efficiencies up to 8-10% highly likely in the near future.

  17. Localized environment characterization device

    KAUST Repository

    Alzain, Hashim

    2016-07-21

    Various apparatuses and methods are provided for measuring the likely environmental impact of a particular geographic location on power generation properties of potential solar installations at the particular location. In an example embodiment of one such apparatus, a measurement device is provided. The measurement device includes a base portion comprising a base frame element disposed on a plurality of supporting legs, and a top panel comprising a series of connected members and one or more measurement modules whose planar dimensions are defined by the series of connected members. The top panel is connected to the base portion by a joint such that the top panel can rotate about the joint, and a panel support element is configured to fasten the top panel immovably at a desired degree of rotation in relation to the base portion.

  18. Dielectrokinetic chromatography devices

    Science.gov (United States)

    Chirica, Gabriela S; Fiechtner, Gregory J; Singh, Anup K

    2014-12-16

    Disclosed herein are methods and devices for dielectrokinetic chromatography. As disclosed, the devices comprise microchannels having at least one perturber which produces a non-uniformity in a field spanning the width of the microchannel. The interaction of the field non-uniformity with a perturber produces a secondary flow which competes with a primary flow. By decreasing the size of the perturber the secondary flow becomes significant for particles/analytes in the nanometer-size range. Depending on the nature of a particle/analyte present in the fluid and its interaction with the primary flow and the secondary flow, the analyte may be retained or redirected. The composition of the primary flow can be varied to affect the magnitude of primary and/or secondary flows on the particles/analytes and thereby separate and concentrate it from other particles/analytes.

  19. Portable biochip scanner device

    Energy Technology Data Exchange (ETDEWEB)

    Perov, Alexander (Troitsk, RU); Sharonov, Alexei (Moscow, RU); Mirzabekov, Andrei D. (Darien, IL)

    2002-01-01

    A portable biochip scanner device used to detect and acquire fluorescence signal data from biological microchips (biochips) is provided. The portable biochip scanner device employs a laser for emitting an excitation beam. An optical fiber delivers the laser beam to a portable biochip scanner. A lens collimates the laser beam, the collimated laser beam is deflected by a dichroic mirror and focused by an objective lens onto a biochip. The fluorescence light from the biochip is collected and collimated by the objective lens. The fluorescence light is delivered to a photomultiplier tube (PMT) via an emission filter and a focusing lens. The focusing lens focuses the fluorescence light into a pinhole. A signal output of the PMT is processed and displayed.

  20. Device for crushing rocks

    Energy Technology Data Exchange (ETDEWEB)

    Kanygin, A.S.; Bulavtsev, V.A.; Zhidkov, A.V.

    1984-01-01

    The purpose of the invention is to simplify the design. The device includes a hydrocylinder with main piston and rod, additional piston with rod placed in the cavity of the main piston rod, wedge attached to the additional piston rod, extension jaws attached to the hydrocylinder housing, and attachment for supply of the working fluid into the above-piston cavity of the rod in the main piston. The latter is made in the form of a channel with reverse valve which connects the rod cavity of the hydrocylinder to the above-piston cavity of the main piston rod. The reverse valve is in the main piston and is made with push rod which goes beyond the limits of the piston on the side of the hydrocylinder rod cavity. The device is designed to separate blocks from the massif on the borehole line.

  1. Organic photosensitive devices

    Science.gov (United States)

    Peumans, Peter; Forrest, Stephen R.

    2013-01-22

    A photoactive device is provided. The device includes a first electrode, a second electrode, and a photoactive region disposed between and electrically connected to the first and second electrodes. The photoactive region further includes an organic donor layer and an organic acceptor layer that form a donor-acceptor heterojunction. The mobility of holes in the organic donor region and the mobility of electrons in the organic acceptor region are different by a factor of at least 100, and more preferably a factor of at least 1000. At least one of the mobility of holes in the organic donor region and the mobility of electrons in the organic acceptor region is greater than 0.001 cm.sup.2/V-sec, and more preferably greater than 1 cm.sup.2/V-sec. The heterojunction may be of various types, including a planar heterojunction, a bulk heterojunction, a mixed heterojunction, and a hybrid planar-mixed heterojunction.

  2. Integrated elastic microscope device

    Science.gov (United States)

    Lee, W. M.; Wright, D.; Watkins, R.; Cen, Zi

    2015-03-01

    The growing power of imaging and computing power of smartphones is creating the possibility of converting your smartphone into a high power pocket microscopy system. High quality miniature microscopy lenses attached to smartphone are typically made with glass or plastics that can only be produce at low cost with high volume. To revise the paradigm of microscope lenses, we devised a simple droplet lens fabrication technique that which produces low cost and high performance lens. Each lens is integrated into thin 3-D printed holder with complimentary light emitted diode (LEDs) that clips onto majority of smartphones. The integrated device converts a smartphone into a high power optical microscope/dermatoscope at around $2. This low cost device has wide application in a multitude of practical uses such as material inspection, dermascope and educational microscope.

  3. Fractional-order devices

    CERN Document Server

    Biswas, Karabi; Caponetto, Riccardo; Mendes Lopes, António; Tenreiro Machado, José António

    2017-01-01

    This book focuses on two specific areas related to fractional order systems – the realization of physical devices characterized by non-integer order impedance, usually called fractional-order elements (FOEs); and the characterization of vegetable tissues via electrical impedance spectroscopy (EIS) – and provides readers with new tools for designing new types of integrated circuits. The majority of the book addresses FOEs. The interest in these topics is related to the need to produce “analogue” electronic devices characterized by non-integer order impedance, and to the characterization of natural phenomena, which are systems with memory or aftereffects and for which the fractional-order calculus tool is the ideal choice for analysis. FOEs represent the building blocks for designing and realizing analogue integrated electronic circuits, which the authors believe hold the potential for a wealth of mass-market applications. The freedom to choose either an integer- or non-integer-order analogue integrator...

  4. Microelectromechanical reprogrammable logic device

    KAUST Repository

    Hafiz, M. A. A.

    2016-03-29

    In modern computing, the Boolean logic operations are set by interconnect schemes between the transistors. As the miniaturization in the component level to enhance the computational power is rapidly approaching physical limits, alternative computing methods are vigorously pursued. One of the desired aspects in the future computing approaches is the provision for hardware reconfigurability at run time to allow enhanced functionality. Here we demonstrate a reprogrammable logic device based on the electrothermal frequency modulation scheme of a single microelectromechanical resonator, capable of performing all the fundamental 2-bit logic functions as well as n-bit logic operations. Logic functions are performed by actively tuning the linear resonance frequency of the resonator operated at room temperature and under modest vacuum conditions, reprogrammable by the a.c.-driving frequency. The device is fabricated using complementary metal oxide semiconductor compatible mass fabrication process, suitable for on-chip integration, and promises an alternative electromechanical computing scheme.

  5. Plastic photovoltaic devices

    OpenAIRE

    Niyazi Serdar Sariciftci

    2004-01-01

    The development of organic, polymer-based photovoltaic elements has introduced the possibility of obtaining cheap and easy-to-produce energy from light. Photoinduced electron transfer from donor-type semiconducting polymers onto acceptor-type polymers or molecules, such as C60, is the basic phenomenon utilized in these photovoltaic devices. This process mimics the early photo-effects in natural photosynthesis. The polymeric semiconductors combine the photoelectrical properties of inorganic se...

  6. Memristor: the illusive device

    KAUST Repository

    Salama, Khaled N.

    2012-05-03

    The memristor (M) is considered to be the fourth two-terminal passive element in electronics, alongside the resistor (R), the capacitor (C), and the inductor (L). Its existence was postulated in 1971 but its first implementation was reported in 2008. Where was it hiding all that time and what can we do with it? Come and learn how the memristor completes the roster of electronic devices much like a missing particle that physicists seek to complete their tableaus.

  7. Fluctuations in quantum devices

    Directory of Open Access Journals (Sweden)

    H.Haken

    2004-01-01

    Full Text Available Logical gates can be formalized by Boolean algebra whose elementary operations can be realized by devices that employ the interactions of macroscopic numbers of elementary excitations such as electrons, holes, photons etc. With increasing miniaturization to the nano scale and below, quantum fluctuations become important and can no longer be ignored. Based on Heisenberg equations of motion for the creation and annihilation operators of elementary excitations, I determine the noise sources of composite quantum systems.

  8. Rooting an Android Device

    Science.gov (United States)

    2015-09-01

    tools that grant root privileges for both Windows and Linux . For the Linux system, open a shell window and use “cd” command to change the directory...defined as a process of gaining administrative commands and functions of an operating system (OS). In order to monitor live network traffic on any... Linux -based or, in this case, Android system, it is necessary to have administrative rights to gain access to any of the hardware devices, such as the

  9. High speed heterostructure devices

    CERN Document Server

    Beer, Albert C; Willardson, R K; Kiehl, Richard A; Sollner, T C L Gerhard

    1994-01-01

    Volume 41 includes an in-depth review of the most important, high-speed switches made with heterojunction technology. This volume is aimed at the graduate student or working researcher who needs a broad overview andan introduction to current literature. Key Features * The first complete review of InP-based HFETs and complementary HFETs, which promise very low power and high speed * Offers a complete, three-chapter review of resonant tunneling * Provides an emphasis on circuits as well as devices.

  10. Spintronics in nanoscale devices

    CERN Document Server

    Hedin, Eric R

    2013-01-01

    By exploiting the novel properties of quantum dots and nanoscale Aharonov-Bohm rings together with the electronic and magnetic properties of various semiconductor materials and graphene, researchers have conducted numerous theoretical and computational modeling studies and experimental tests that show promising behavior for spintronics applications. Spin polarization and spin-filtering capabilities and the ability to manipulate the electron spin state through external magnetic or electric fields have demonstrated the promise of workable nanoscale devices for computing and memory applications.

  11. Hybrid electroluminescent devices

    Science.gov (United States)

    Shiang, Joseph John; Duggal, Anil Raj; Michael, Joseph Darryl

    2010-08-03

    A hybrid electroluminescent (EL) device comprises at least one inorganic diode element and at least one organic EL element that are electrically connected in series. The absolute value of the breakdown voltage of the inorganic diode element is greater than the absolute value of the maximum reverse bias voltage across the series. The inorganic diode element can be a power diode, a Schottky barrier diode, or a light-emitting diode.

  12. [International progress of unique device identification for medical devices].

    Science.gov (United States)

    Yang, Wanjuan; Li, Jun; Li, Jingli

    2014-09-01

    Unique Device Identification (UDI) is a hot spot research area in the medical device administration. It comes a breakthrough from International Medical Device Regulators Forum (IMDRF) and government implementation recently. The article reviewed the advancement of IMDRF UDI program, discussed the framework for UDI system, analyzed the implementation of UDI in other countries, put forward some suggestions on the development of medical device coding system in our country.

  13. DeviceNet-based device-level control in SSRF

    CERN Document Server

    Leng Yong Bin; Lu Cheng Meng; Miao Hai Feng; Liu Song Qiang; Shen Guo Bao

    2002-01-01

    The control system of Shanghai Synchrotron Radiation Facility is an EPICS-based distributed system. One of the key techniques to construct the system is the device-level control. The author describes the design and implementation of the DeviceNet-based device controller. A prototype of the device controller was tested in the experiments of magnet power supply and the result showed a precision of 3 x 10 sup - sup 5

  14. Nanoscale Electronic Devices

    Science.gov (United States)

    Jing, Xiaoye

    Continuous downscaling in microelectronics has pushed conventional CMOS technology to its physical limits, while Moore's Law has correctly predicted the trend for decades, each step forward is accompanied with unprecedented technological difficulties and near-exponential increase in cost. At the same time, however, demands for low-power, low-cost and high-speed devices have never diminished, instead, even more stringent requirements have been imposed on device performances. It is therefore crucial to explore alternative materials and device architectures in order to alleviate the pressure caused by downscaling. To this end, we investigated two different approaches: (1) InSb nanowire based field effect transistors (NWFETs) and (2) single walled carbon nanotube (SWCNT) -- peptide nucleic acid (PNA) --SWCNT conjugate. Two types of InSb nanowires were synthesized by template-assisted electrochemistry and chemical vapor deposition (CVD) respectively. In both cases, NWFETs were fabricated by electron beam lithography (EBL) and crystallinity was confirmed by transmission electron microscopy (TEM) and selected area diffraction (SAD) patterns. For electrochemistry nanowire, ambipolar conduction was observed with strong p-type conduction, the effect of thermal annealing on the conductivity was analyzed, a NWFET model that took into consideration the underlapped region in top-gated NWFET was proposed. Hole mobility in the channel was calculated to be 292.84 cm2V-1s -1 with a density of 1.5x1017/cm3. For CVD nanowire, the diameter was below 40nm with an average of 20nm. Vapor-liquid-solid (VLS) process was speculated to be the mechanism responsible for nanowire growth. The efficient gate control was manifested by high ION/I OFF ratio which was on the order of 106 and a small inverse subthreshold slope (<200 mV/decade). Scale analysis was used to successfully account for disparities observed among a number of sample devices. N-type conduction was found in all NWFETs with

  15. Advanced Semiconductor Devices

    Science.gov (United States)

    Shur, Michael S.; Maki, Paul A.; Kolodzey, James

    2007-06-01

    I. Wide band gap devices. Wide-Bandgap Semiconductor devices for automotive applications / M. Sugimoto ... [et al.]. A GaN on SiC HFET device technology for wireless infrastructure applications / B. Green ... [et al.]. Drift velocity limitation in GaN HEMT channels / A. Matulionis. Simulations of field-plated and recessed gate gallium nitride-based heterojunction field-effect transistors / V. O. Turin, M. S. Shur and D. B. Veksler. Low temperature electroluminescence of green and deep green GaInN/GaN light emitting diodes / Y. Li ... [et al.]. Spatial spectral analysis in high brightness GaInN/GaN light emitting diodes / T. Detchprohm ... [et al.]. Self-induced surface texturing of Al2O3 by means of inductively coupled plasma reactive ion etching in Cl2 chemistry / P. Batoni ... [et al.]. Field and termionic field transport in aluminium gallium arsenide heterojunction barriers / D. V. Morgan and A. Porch. Electrical characteristics and carrier lifetime measurements in high voltage 4H-SiC PiN diodes / P. A. Losee ... [et al.]. Geometry and short channel effects on enhancement-mode n-Channel GaN MOSFETs on p and n- GaN/sapphire substrates / W. Huang, T. Khan and T. P. Chow. 4H-SiC Vertical RESURF Schottky Rectifiers and MOSFETs / Y. Wang, P. A. Losee and T. P. Chow. Present status and future Directions of SiGe HBT technology / M. H. Khater ... [et al.]Optical properties of GaInN/GaN multi-quantum Wells structure and light emitting diode grown by metalorganic chemical vapor phase epitaxy / J. Senawiratne ... [et al.]. Electrical comparison of Ta/Ti/Al/Mo/Au and Ti/Al/Mo/Au Ohmic contacts on undoped GaN HEMTs structure with AlN interlayer / Y. Sun and L. F. Eastman. Above 2 A/mm drain current density of GaN HEMTs grown on sapphire / F. Medjdoub ... [et al.]. Focused thermal beam direct patterning on InGaN during molecular beam epitaxy / X. Chen, W. J. Schaff and L. F. Eastman -- II. Terahertz and millimeter wave devices. Temperature-dependent microwave performance of

  16. 77 FR 69488 - Medical Devices; Custom Devices; Request for Comments

    Science.gov (United States)

    2012-11-19

    ... HUMAN SERVICES Food and Drug Administration Medical Devices; Custom Devices; Request for Comments AGENCY... of developing an implementation strategy and policy for the custom device exemption criteria in the FD&C Act amended by FDASIA. FDA is seeking information on appropriate uses of the custom...

  17. Intrauterine device developments.

    Science.gov (United States)

    1984-01-01

    Results of recent IUD research are presented. The largest study of postpartum IUD insertion to date, a multicenter comparative trail involving 3791 women at 15 sites in 13 countries, has shown that the practice is safe and effective if the IUD is correctly placed. Modifications in design of the device are unnecessary to reduce expulsions. In 1977, Family Health International (FHI) began developing IUDs that would have clinically acceptable expulsion rates following postpartum insertion. By adding chromic catgut suture material to the upper arms of the TCu andLippes Loop, FHI developed the Delta T and Delta Loop. Many of the centers involved in studies of postpartum IUD insertion were large urban maternity hospitals in developing countries with heavy caseloads of 10,000-30,000 deliveries/year. Results of the trials and of a 19-center evaluation of the timing of postpartum insertion support several conclusions: 1) insertion should take place within 10 minutes of placental expulsion; 2) if insertion is done within 10 minutes of delivery, there is no increased risk of infection or uterine perforation; 3) the type of device inserted is less important than the method of insertion; expulsion rates at different clinics ranged from 6-37/1000 women at 6 monts, and the fundal placement of the device is crucial; and 4) expulsions are higher for postpartum than interval insertions but not so high as to make the offer of an IUD immediately postpartum unacceptable. Since the incidence of pain or bleeding associated with IUD use is related to their size, attempts to decrease the side effects have centered on development of smaller copper devices. 1 such device, the copper i, consists of a straight stem with small crossarms in an 'x' configuration disigned to anchor the IUD in place. A copper wire around the stem of the device exposes 200 sq millimeters of cooper. A study of 98 women who used the Copper i showed an accidental pregnancy rate of 3.2 at 6 months and 9.0 at 12 months

  18. Photoemission-based microelectronic devices

    Science.gov (United States)

    Forati, Ebrahim; Dill, Tyler J.; Tao, Andrea R.; Sievenpiper, Dan

    2016-11-01

    The vast majority of modern microelectronic devices rely on carriers within semiconductors due to their integrability. Therefore, the performance of these devices is limited due to natural semiconductor properties such as band gap and electron velocity. Replacing the semiconductor channel in conventional microelectronic devices with a gas or vacuum channel may scale their speed, wavelength and power beyond what is available today. However, liberating electrons into gas/vacuum in a practical microelectronic device is quite challenging. It often requires heating, applying high voltages, or using lasers with short wavelengths or high powers. Here, we show that the interaction between an engineered resonant surface and a low-power infrared laser can cause enough photoemission via electron tunnelling to implement feasible microelectronic devices such as transistors, switches and modulators. The proposed photoemission-based devices benefit from the advantages of gas-plasma/vacuum electronic devices while preserving the integrability of semiconductor-based devices.

  19. Pointing Devices for Wearable Computers

    OpenAIRE

    Andrés A. Calvo; Saverio Perugini

    2014-01-01

    We present a survey of pointing devices for wearable computers, which are body-mounted devices that users can access at any time. Since traditional pointing devices (i.e., mouse, touchpad, and trackpoint) were designed to be used on a steady and flat surface they are inappropriate for wearable computers. Just as the advent of laptops resulted in the development of the touchpad and trackpoint, the emergence of wearable computers is leading to the development of pointing devices designed for th...

  20. An introduction to electrooptic devices

    CERN Document Server

    Kaminow, Ivan P

    1974-01-01

    An Introduction to Electrooptic Devices aims to present an introduction to the electrooptic effect and to summarize work on devices employing the electrooptic effect. The book provides the necessary background in classical crystal optics. The text then discusses topics including crystal symmetry, the tensor description of linear dielectric properties, propagation in anisotropic media, and passive crystal optic devices. The book also describes the phenomenological description of tensor nonlinear dielectric properties of crystals, with emphasis on the electrooptic effect; device design and appli

  1. Webshop Optimization for Mobile Devices

    OpenAIRE

    Mei, Long

    2009-01-01

    This thesis deals with the programming technology which can be used to optimize the webshop design for mobile devices. The purpose of this thesis is to demonstrate several possible solutions when doing implementation of webshop applications for mobile devices. web application developers and companies who wants to optimize their products for mobile devices could also benefit from this study.

  2. [Design of SCM inoculation device].

    Science.gov (United States)

    Qian, Mingli; Xie, Haiyuan

    2014-01-01

    The first step of bacilli culture is inoculation bacteria on culture medium. Designing a device to increase efficiency of inoculation is significative. The new device is controlled by SCM. The stepper motor can drive the culture medium rotating, accelerating, decelerating, overturn and suspending. The device is high practicability and efficient, let inoculation easy for operator.

  3. Medical devices and patient safety.

    Science.gov (United States)

    Mattox, Elizabeth

    2012-08-01

    Errors related to health care devices are not well understood. Nurses in intensive care and progressive care environments can benefit from understanding manufacturer-related error and device-use error, the principles of human factors engineering, and the steps that can be taken to reduce risk of errors related to health care devices.

  4. Mechanical device for tissue regeneration

    NARCIS (Netherlands)

    Herder, J.L.; Maij, E.

    2010-01-01

    The invention relates to a mechanical device for tissue- regeneration inside a patient, comprising means (2, 3) to place a scaffold for the tissue under mechanical stress. Said means comprise a first device-part (2) and a second device-part (3) which parts are arranged to be movable with respect to

  5. Silicon active photonic devices

    Science.gov (United States)

    Dimitropoulos, Dimitrios

    Active photonic devices utilizing the optical nonlinearities of silicon have emerged in the last 5 years and the effort for commercial photonic devices in the material that has been the workhorse of electronics has been building up since. This dissertation presents the theory for some of these devices. We are concerned herein with CW lasers, amplifiers and wavelength converters that are based on the Raman effect. There have already been cursory experimental demonstrations of these devices and some of their limitations are already apparent. Most of the limitations observed are because of the appearance of effects that are competing with stimulated Raman scattering. Under the high optical powers that are necessary for the Raman effect (tens to hundrends of mW's) the process of optical two-photon (TPA) absorption occurs. The absorption of optical power that it causes itself is weak but in the process electrons and holes are generated which can further absorb light through the free-carrier absorption effect (FCA). The effective "lifetime" that these carriers have determines the magnitude of the FCA loss. We present a model for the carrier lifetime in Silicon-On-Insulator (SOI) waveguides and numerical simulations to understand how this critical parameter varies and how it can be controlled. A p-i-n junction built along SOI waveguides can help achieve lifetime of the order of 20--100 ps but the price one has to pay is on-chip electrical power consumption on the order of 100's of mWs. We model CW Raman lasers and we find that the carrier lifetime reduces the output power. If the carrier lifetime exceeds a certain "critical" value optical losses become overwhelming and lasing is impossible. As we show, in amplifiers, the nonlinear loss does not only result in diminished gain, but also in a higher noise figure. Finally the effect of Coherent anti-Stokes Raman scattering (CARS) is examined. The effect is important because with a pump frequency at 1434nm coherent power

  6. Nanoimprinted photonic devices

    Science.gov (United States)

    Thomas, Jayan; Gangopadhyay, Palash; Munoz, Ramon; Peyghambarian, N.

    2010-08-01

    We introduce a simple yet efficient approach for nanoimprinting sub-50 nm dimensions starting from a low molecular weight plasticized polymer melt. This technique enabled us to successfully imprint versatile large area nanopatterns with high degrees of fidelity and rational control over the residual layers. The key advantage is its reliability in printing versatile nanostructures and nanophotonic devices doped with organic dyes owing to its low processing temperature. Since nanopatterns can be fabricated easily at low costs, this approach offers an easy pathway for achieving excellent nanoimprinted structures for a variety of photonic, electronic and biological research and applications.

  7. Data mining mobile devices

    CERN Document Server

    Mena, Jesus

    2013-01-01

    With today's consumers spending more time on their mobiles than on their PCs, new methods of empirical stochastic modeling have emerged that can provide marketers with detailed information about the products, content, and services their customers desire.Data Mining Mobile Devices defines the collection of machine-sensed environmental data pertaining to human social behavior. It explains how the integration of data mining and machine learning can enable the modeling of conversation context, proximity sensing, and geospatial location throughout large communities of mobile users

  8. Microneedle Device Prototype

    Science.gov (United States)

    2014-05-01

    Device Prototype Final Report iv | List of Figures List of Figures Figure 3-1. Print screen of the STL file of a hollow microneedle design in Alibre...created in the e-Shell 300 substrates to create a fluidic path between the hollow microneedles and the microfluidic chip. The bores were prepared by...100 mW. The laser’s beam was focused onto the sample with a 4× objective to increase the photon density and obtain two-photon polymerization of the

  9. Forensics mobile devices

    Directory of Open Access Journals (Sweden)

    Milorad S. Markagić

    2013-02-01

    Full Text Available The article gives an overview of possibilities of digitized mobile(portable devices, and methods of research data with them.Emphasis is placed on the forensic investigation of mobilephones, but are covered by other media and research for digitalprocessing, transmission and storage of information.A special emphasis was made on the software tools in carrying out the acquisition of digital data, with the aim of sending the reader on ways and methods to protect data but also knowledgewhich is the same all be found and how they can be misused for criminal purposes

  10. Nanotube resonator devices

    Science.gov (United States)

    Jensen, Kenneth J; Zettl, Alexander K; Weldon, Jeffrey A

    2014-05-06

    A fully-functional radio receiver fabricated from a single nanotube is being disclosed. Simultaneously, a single nanotube can perform the functions of all major components of a radio: antenna, tunable band-pass filter, amplifier, and demodulator. A DC voltage source, as supplied by a battery, can power the radio. Using carrier waves in the commercially relevant 40-400 MHz range and both frequency and amplitude modulation techniques, successful music and voice reception has been demonstrated. Also disclosed are a radio transmitter and a mass sensor using a nanotube resonator device.

  11. Anisotropic metamaterial devices

    Directory of Open Access Journals (Sweden)

    Wei Xiang Jiang

    2009-12-01

    Full Text Available In the last few years, a rapid development has been achieved in a subject area, so called optical transformation, which is based on the property of metric invariance in Maxwell's equations. Optical transformation, also known as transformation optics, allows metamaterials to be tailor-made according to practical needs. In this paper, we have reviewed the recent progress on the parametric design of transformation devices, such as invisibility cloaks, electromagnetic (EM concentrator, EM-wave converter, etc. The technique of optical transformation can also be applied when the sources are included in the transformed space.

  12. Pneumatically actuated micropipetting device

    Science.gov (United States)

    Szita, Nicolas; Buser, Rudolf A.

    1998-03-01

    We have realized a valveless micropipetting device with an integrated sensor which can aspirate and dispense liquid volumes without any valves, hence without any reflow or dead volume. With an external pneumatic actuation, we have demonstrated aspirating and dispensing from 190nl of 6 (mu) l of water. Measurements showed a standard deviation of down to 1 percent. An integrated capacitive sensor will allow monitoring of the pressure throughout the pipetting process and detect malfunctions, e.g. clotting of the pipetting tip. It is our intention to use this demonstrated precise aspiration mechanism in combination with a micromachined reaction chamber and a miniaturized optical analysis system.

  13. Stiffness of compression devices

    Directory of Open Access Journals (Sweden)

    Giovanni Mosti

    2013-03-01

    Full Text Available This issue of Veins and Lymphatics collects papers coming from the International Compression Club (ICC Meeting on Stiffness of Compression Devices, which took place in Vienna on May 2012. Several studies have demonstrated that the stiffness of compression products plays a major role for their hemodynamic efficacy. According to the European Committee for Standardization (CEN, stiffness is defined as the pressure increase produced by medical compression hosiery (MCH per 1 cm of increase in leg circumference.1 In other words stiffness could be defined as the ability of the bandage/stockings to oppose the muscle expansion during contraction.

  14. Hybrid silicon evanescent devices

    Directory of Open Access Journals (Sweden)

    Alexander W. Fang

    2007-07-01

    Full Text Available Si photonics as an integration platform has recently been a focus of optoelectronics research because of the promise of low-cost manufacturing based on the ubiquitous electronics fabrication infrastructure. The key challenge for Si photonic systems is the realization of compact, electrically driven optical gain elements. We review our recent developments in hybrid Si evanescent devices. We have demonstrated electrically pumped lasers, amplifiers, and photodetectors that can provide a low-cost, scalable solution for hybrid integration on a Si platform by using a novel hybrid waveguide architecture, consisting of III-V quantum wells bonded to Si waveguides.

  15. COMMUNICATION - ORGANIZATIONS’ WORK DEVICE

    Directory of Open Access Journals (Sweden)

    LAVINIA HULEA

    2010-01-01

    Full Text Available Communication represents a complex process of transmitting messages, owing to which the emitter encodes the information transmitted through a specific channel towards a receiver that will decode it. Owing to communication, organizations transmit to their customers the fact that they are capable of meeting one of their needs, of settling a problem or of offering a profit. Non-verbal and para-verbal communications usually accompany verbal communication. The importance of assimilating the forms of communication is, at an organizational level, a complex device that determines the mastering of certain techniques, procedures, and algorithms of encoding and decoding intricate messages transmitted through various channels.

  16. Electromechanical motion devices

    CERN Document Server

    Krause, Paul C; Pekarek, Steven D

    2012-01-01

    This text provides a basic treatment of modern electric machine analysis that gives readers the necessary background for comprehending the traditional applications and operating characteristics of electric machines-as well as their emerging applications in modern power systems and electric drives, such as those used in hybrid and electric vehicles. Through the appropriate use of reference frame theory, Electromagnetic Motion Devices, Second Edition introduces readers to field-oriented control of induction machines, constant-torque, and constant-power control of dc, permanent-magnet ac

  17. Graphene device and method of using graphene device

    Science.gov (United States)

    Bouchiat, Vincent; Girit, Caglar; Kessler, Brian; Zettl, Alexander K.

    2015-08-11

    An embodiment of a graphene device includes a layered structure, first and second electrodes, and a dopant island. The layered structure includes a conductive layer, an insulating layer, and a graphene layer. The electrodes are coupled to the graphene layer. The dopant island is coupled to an exposed surface of the graphene layer between the electrodes. An embodiment of a method of using a graphene device includes providing the graphene device. A voltage is applied to the conductive layer of the graphene device. Another embodiment of a method of using a graphene device includes providing the graphene device without the dopant island. A dopant island is placed on an exposed surface of the graphene layer between the electrodes. A voltage is applied to the conductive layer of the graphene device. A response of the dopant island to the voltage is observed.

  18. Emissivity modulating electrochromic device

    Science.gov (United States)

    Demiryont, Hulya; Shannon, Kenneth C., III; Sheets, Judd

    2009-05-01

    The IR-ECDTM (Infra-Red ElectroChromic Device) variable emitance device (VED) is an all-solid-state monolithic vacuum deposited thin film system with a unique metamaterial IR transparent-electrode system which functions as an electrically controlled dimmable mirror in the IR region. The maximum reflectance corresponding to the bleached condition of the system is around 90% (low-e condition, e=0.1). The minimum reflectance reaches nearly zero in the colored condition of the system (high emittance, e=1). The average emissivity modulation of the IRECDTM is 0.7 in the 8-12 micron region, and at 9.7 micron (room temperature) it reaches a value of 0.9. Half and full emissivity modulations occur within 2 and10 minutes respectively. Because of its light weight (5g/m2), low voltage requirement (+/- 1 Volts), extremely good emissivity control properties (from 0 to 0.9 at 300K) and highly repeatable deposition process, the IR-ECDTM technology is very attractive for satellite thermal control applications. The IR-ECDTM has been under evaluation in a real space environment since March 8, 2007. This paper presents recent achievements of the IR-ECDTM including space test results.

  19. Micro-Organ Device

    Science.gov (United States)

    Gonda, Steve R. (Inventor); Chang, Robert C. (Inventor); Starly, Binil (Inventor); Culbertson, Christopher (Inventor); Holtorf, Heidi L. (Inventor); Sun, Wei (Inventor); Leslie, Julia (Inventor)

    2013-01-01

    A method for fabricating a micro-organ device comprises providing a microscale support having one or more microfluidic channels and one or more micro-chambers for housing a micro-organ and printing a micro-organ on the microscale support using a cell suspension in a syringe controlled by a computer-aided tissue engineering system, wherein the cell suspension comprises cells suspended in a solution containing a material that functions as a three-dimensional scaffold. The printing is performed with the computer-aided tissue engineering system according to a particular pattern. The micro-organ device comprises at least one micro-chamber each housing a micro-organ; and at least one microfluidic channel connected to the micro-chamber, wherein the micro-organ comprises cells arranged in a configuration that includes microscale spacing between portions of the cells to facilitate diffusion exchange between the cells and a medium supplied from the at least one microfluidic channel.

  20. Next generation toroidal devices

    Energy Technology Data Exchange (ETDEWEB)

    Yoshikawa, Shoichi [Princeton Plasma Physics Lab., Princeton Univ., NJ (United States)

    1998-10-01

    A general survey of the possible approach for the next generation toroidal devices was made. Either surprisingly or obviously (depending on one`s view), the technical constraints along with the scientific considerations lead to a fairly limited set of systems for the most favorable approach for the next generation devices. Specifically if the magnetic field strength of 5 T or above is to be created by superconducting coils, it imposes minimum in the aspect ratio for the tokamak which is slightly higher than contemplated now for ITER design. The similar technical constraints make the minimum linear size of a stellarator large. Scientifically, it is indicated that a tokamak of 1.5 times in the linear dimension should be able to produce economically, especially if a hybrid reactor is allowed. For the next stellarator, it is strongly suggested that some kind of helical axis is necessary both for the (almost) absolute confinement of high energy particles and high stability and equilibrium beta limits. The author still favors a heliac most. Although it may not have been clearly stated in the main text, the stability afforded by the shearless layer may be exploited fully in a stellarator. (author)

  1. Thermoplastic tape compaction device

    Science.gov (United States)

    Campbell, V.W.

    1994-12-27

    A device is disclosed for bonding a thermoplastic tape to a substrate to form a fully consolidated composite. This device has an endless chain associated with a frame so as to rotate in a plane that is perpendicular to a long dimension of the tape, the chain having pivotally connected chain links with each of the links carrying a flexible foot member that extends outwardly from the chain. A selected number of the foot members contact the tape, after the heating thereof, to cause the heated tape to bond to the substrate. The foot members are each a thin band of metal oriented transversely to the chain, with a flexibility and width and length to contact the tape so as to cause the tape to conform to the substrate to achieve consolidation of the tape and the substrate. A biased leaf-type spring within the frame bears against an inner surface of the chain to provide the compliant pressure necessary to bond the tape to the substrate. The chain is supported by sprockets on shafts rotatably supported in the frame and, in one embodiment, one of the shafts has a drive unit to produce rotation such that the foot members in contact with the tape move at the same speed as the tape. Cooling jets are positioned along the frame to cool the resultant consolidated composite. 5 figures.

  2. Carbon for sensing devices

    CERN Document Server

    Tagliaferro, Alberto

    2015-01-01

    This book reveals why carbon is playing such an increasingly prominent role as a sensing material. The various steps that transform a raw material in a sensing device are thoroughly presented and critically discussed.  The authors deal with all aspects of carbon-based sensors, starting from the various hybridization and allotropes of carbon, with specific focus on micro and nanosized carbons (e.g., carbon nanotubes, graphene) and their growth processes. The discussion then moves to the role of functionalization and the different routes to achieve it. Finally, a number of sensing applications in various fields are presented, highlighting the connection with the basic properties of the various carbon allotropes.  Readers will benefit from this book’s bottom-up approach, which starts from the local bonding in carbon solids and ends with sensing applications, linking the local hybridization of carbon atoms and its modification by functionalization to specific device performance. This book is a must-have in th...

  3. Carbon based prosthetic devices

    Energy Technology Data Exchange (ETDEWEB)

    Devlin, D.J.; Carroll, D.W.; Barbero, R.S.; Archuleta, T. [Los Alamos National Lab., NM (US); Klawitter, J.J.; Ogilvie, W.; Strzepa, P. [Ascension Orthopedics (US); Cook, S.D. [Tulane Univ., New Orleans, LA (US). School of Medicine

    1998-12-31

    This is the final report of a one-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). The project objective was to evaluate the use of carbon/carbon-fiber-reinforced composites for use in endoprosthetic devices. The application of these materials for the metacarpophalangeal (MP) joints of the hand was investigated. Issues concerning mechanical properties, bone fixation, biocompatibility, and wear are discussed. A system consisting of fiber reinforced materials with a pyrolytic carbon matrix and diamond-like, carbon-coated wear surfaces was developed. Processes were developed for the chemical vapor infiltration (CVI) of pyrolytic carbon into porous fiber preforms with the ability to tailor the outer porosity of the device to provide a surface for bone in-growth. A method for coating diamond-like carbon (DLC) on the articulating surface by plasma-assisted chemical vapor deposition (CVD) was developed. Preliminary results on mechanical properties of the composite system are discussed and initial biocompatibility studies were performed.

  4. Heterostructure terahertz devices.

    Science.gov (United States)

    Ryzhii, Victor

    2008-08-19

    The terahertz (THz) range of frequencies is borderline between microwave electronics and photonics. It corresponds to the frequency bands of molecular and lattice vibrations in gases, fluids, and solids. The importance of the THz range is in part due to numerous potential and emerging applications which include imaging and characterization, detection of hazardous substances, environmental monitoring, radio astronomy, covert inter-satellite communications, as well as biological and medical applications. During the last decades marked progress has been achieved in the development, fabrication, and practical implementation of THz devices and systems. This is primarily owing to the utilization of gaseous and free electron lasers and frequency converters using nonlinear optical phenomena as sources of THz radiation. However, such devices and hence the systems based on them are fairly cumbersome. This continuously stimulates an extensive search for new compact and efficient THz sources based on semiconductor heterostructures. Despite tremendous efforts lasting several decades, the so-called THz gap unbridged by semiconductor heterostructure electron and optoelectron devices still exists providing appropriate levels of power of the generated THz radiation. The invention and realization of quantum cascade lasers made of multiple quantum-well heterostructures already resulted in the partial solution of the problem in question, namely, in the successful coverage of the high-frequency portion of the THz gap (2-3 THz and higher). Further advancement to lower frequencies meets, perhaps, fundamental difficulties. All this necessitates further extensive theoretical and experimental studies of more or less traditional and novel semiconductor heterostructures as a basis for sources of THz radiation. This special issue includes 11 excellent original papers submitted by several research teams representing 14 institutions in Europe, America, and Asia. Several device concepts which

  5. Preface: Heterostructure terahertz devices

    Science.gov (United States)

    Ryzhii, Victor

    2008-08-01

    The terahertz (THz) range of frequencies is borderline between microwave electronics and photonics. It corresponds to the frequency bands of molecular and lattice vibrations in gases, fluids, and solids. The importance of the THz range is in part due to numerous potential and emerging applications which include imaging and characterization, detection of hazardous substances, environmental monitoring, radio astronomy, covert inter-satellite communications, as well as biological and medical applications. During the last decades marked progress has been achieved in the development, fabrication, and practical implementation of THz devices and systems. This is primarily owing to the utilization of gaseous and free electron lasers and frequency converters using nonlinear optical phenomena as sources of THz radiation. However, such devices and hence the systems based on them are fairly cumbersome. This continuously stimulates an extensive search for new compact and efficient THz sources based on semiconductor heterostructures. Despite tremendous efforts lasting several decades, the so-called THz gap unbridged by semiconductor heterostructure electron and optoelectron devices still exists providing appropriate levels of power of the generated THz radiation. The invention and realization of quantum cascade lasers made of multiple quantum-well heterostructures already resulted in the partial solution of the problem in question, namely, in the successful coverage of the high-frequency portion of the THz gap (2-3 THz and higher). Further advancement to lower frequencies meets, perhaps, fundamental difficulties. All this necessitates further extensive theoretical and experimental studies of more or less traditional and novel semiconductor heterostructures as a basis for sources of THz radiation. This special issue includes 11 excellent original papers submitted by several research teams representing 14 institutions in Europe, America, and Asia. Several device concepts which

  6. Stretchable and wearable electrochromic devices.

    Science.gov (United States)

    Yan, Chaoyi; Kang, Wenbin; Wang, Jiangxin; Cui, Mengqi; Wang, Xu; Foo, Ce Yao; Chee, Kenji Jianzhi; Lee, Pooi See

    2014-01-28

    Stretchable and wearable WO3 electrochromic devices on silver nanowire (AgNW) elastic conductors are reported. The stretchable devices are mechanically robust and can be stretched, twisted, folded, and crumpled without performance failure. Fast coloration (1 s) and bleaching (4 s) time and good cyclic stability (81% retention after 100 cycles) were achieved at relaxed state. Proper functioning at stretched state (50% strain) was also demonstrated. The electrochromic devices were successfully implanted onto textile substrates for potential wearable applications. As most existing electrochromic devices are based on rigid technologies, the innovative devices in their soft form hold the promise for next-generation electronics such as stretchable, wearable, and implantable display applications.

  7. Deformable paper origami optoelectronic devices

    KAUST Repository

    He, Jr-Hau

    2017-01-19

    Deformable optoelectronic devices are provided, including photodetectors, photodiodes, and photovoltaic cells. The devices can be made on a variety of paper substrates, and can include a plurality of fold segments in the paper substrate creating a deformable pattern. Thin electrode layers and semiconductor nanowire layers can be attached to the substrate, creating the optoelectronic device. The devices can be highly deformable, e.g. capable of undergoing strains of 500% or more, bending angles of 25° or more, and/or twist angles of 270° or more. Methods of making the deformable optoelectronic devices and methods of using, e.g. as a photodetector, are also provided.

  8. Plasma devices for hydrocarbon reformation

    KAUST Repository

    Cha, Min Suk

    2017-02-16

    Plasma devices for hydrocarbon reformation are provided. Methods of using the devices for hydrocarbon reformation are also provided. The devices can include a liquid container to receive a hydrocarbon source, and a plasma torch configured to be submerged in the liquid. The plasma plume from the plasma torch can cause reformation of the hydrocarbon. The device can use a variety of plasma torches that can be arranged in a variety of positions in the liquid container. The devices can be used for the reformation of gaseous hydrocarbons and/or liquid hydrocarbons. The reformation can produce methane, lower hydrocarbons, higher hydrocarbons, hydrogen gas, water, carbon dioxide, carbon monoxide, or a combination thereof.

  9. Organic photoresponse materials and devices.

    Science.gov (United States)

    Dong, Huanli; Zhu, Hongfei; Meng, Qing; Gong, Xiong; Hu, Wenping

    2012-03-07

    Organic photoresponse materials and devices are critically important to organic optoelectronics and energy crises. The activities of photoresponse in organic materials can be summarized in three effects, photoconductive, photovoltaic and optical memory effects. Correspondingly, devices based on the three effects can be divided into (i) photoconductive devices such as photodetectors, photoreceptors, photoswitches and phototransistors, (ii) photovoltaic devices such as organic solar cells, and (iii) optical data storage devices. It is expected that this systematic analysis of photoresponse materials and devices could be a guide for the better understanding of structure-property relationships of organic materials and provide key clues for the fabrication of high performance organic optoelectronic devices, the integration of them in circuits and the application of them in renewable green energy strategies (critical review, 452 references).

  10. Graphene-based conformal devices.

    Science.gov (United States)

    Park, Yong Ju; Lee, Seoung-Ki; Kim, Min-Seok; Kim, Hyunmin; Ahn, Jong-Hyun

    2014-08-26

    Despite recent progress in bendable and stretchable thin-film transistors using novel designs and materials, the development of conformal devices remains limited by the insufficient flexibility of devices. Here, we demonstrate the fabrication of graphene-based conformal and stretchable devices such as transistor and tactile sensor on a substrate with a convoluted surface by scaling down the device thickness. The 70 nm thick graphene-based conformal devices displayed a much lower bending stiffness than reported previously. The demonstrated devices provided excellent conformal coverage over an uneven animal hide surface without the need for an adhesive. In addition, the ultrathin graphene devices formed on the three-dimensionally curved animal hide exhibited stable electrical characteristics, even under repetitive bending and twisting. The advanced performance and flexibility demonstrated here show promise for the development and adoption of wearable electronics in a wide range of future applications.

  11. Cybersecurity for Connected Diabetes Devices.

    Science.gov (United States)

    Klonoff, David C

    2015-04-16

    Diabetes devices are increasingly connected wirelessly to each other and to data-displaying reader devices. Threats to the accurate flow of information and commands may compromise the function of these devices and put their users at risk of health complications. Sound cybersecurity of connected diabetes devices is necessary to maintain confidentiality, integrity, and availability of the data and commands. Diabetes devices can be hacked by unauthorized agents and also by patients themselves to extract data that are not automatically provided by product software. Unauthorized access to connected diabetes devices has been simulated and could happen in reality. A cybersecurity standard designed specifically for connected diabetes devices will improve the safety of these products and increase confidence of users that the products will be secure. © 2015 Diabetes Technology Society.

  12. QoE-Aware Device-to-Device Multimedia Communications

    Directory of Open Access Journals (Sweden)

    Liang ZHOU

    2015-08-01

    Full Text Available Multimedia services over mobile device-to-device (D2D networks has recently received considerable attention. In this scenario, each device is equipped with a cellular communication interface, as well as a D2D interface over a shared medium. In this work, we study the performance properties of the mobile D2D communications in the framework of user satisfaction, and develop a fully distributed QoE-aware multimedia communication scheme (QAMCS. Specifically, we translate the opportunistic multimedia communications issue into a stochastic optimization problem, which opens up a new degree of performance to exploit. Moreover, QAMCS is designed for a heterogeneous and dynamic environment, in which user demand, device mobility, and transmission fashion may vary across different devices and applications. Importantly, QAMCS is able to maximize the user satisfaction and only needs each device to implement its own scheme individually in the absence of a central controller.

  13. Materials for optoelectronic devices

    Energy Technology Data Exchange (ETDEWEB)

    Shiang, Joseph John; Smigelski, Jr., Paul Michael

    2015-01-27

    Energy efficient optoelectronic devices include an electroluminescent layer containing a polymer made up of structural units of formula I and II; ##STR00001## wherein R.sup.1 and R.sup.2 are independently C.sub.22-44 hydrocarbyl, C.sub.22-44 hydrocarbyl containing one or more S, N, O, P, or Si atoms, oxaalkylaryl, or a combination thereof; R.sup.3 and R.sup.4 are independently H, C.sub.1-44 hydrocarbyl or C.sub.1-44 hydrocarbyl containing one or more S, N, O, P, or Si atoms, or R.sup.3 and R.sup.4, taken together, form a C.sub.2-10 monocyclic or bicyclic ring containing up to three S, N, O, P, or Si heteroatoms; and X is S, Se, or a combination thereof.

  14. Personal annunciation device

    Science.gov (United States)

    Angelo, Peter; Younkin, James; DeMint, Paul

    2011-01-25

    A personal annunciation device (PAD) providing, in an area of interest, compensatory annunciation of the presence of an abnormal condition in a hazardous area and accountability of the user of the PAD. Compensatory annunciation supplements primary annunciation provided by an emergency notification system (ENS). A detection system detects an abnormal condition, and a wireless transmission system transmits a wireless transmission to the PAD. The PAD has a housing enclosing the components of the PAD including a communication module for receiving the wireless transmission, a power supply, processor, memory, annunciation system, and RFID module. The RFID module has an RFID receiver that listens for an RFID transmission from an RFID reader disposed in a portal of an area of interest. The PAD identifies the transmission and changes its operating state based on the transmission. The RFID readers recognize, record, and transmit the state of the PAD to a base station providing accountability of the wearer.

  15. Efficient thermoelectric device

    Science.gov (United States)

    Ila, Daryush (Inventor)

    2010-01-01

    A high efficiency thermo electric device comprising a multi nanolayer structure of alternating insulator and insulator/metal material that is irradiated across the plane of the layer structure with ionizing radiation. The ionizing radiation produces nanocrystals in the layered structure that increase the electrical conductivity and decrease the thermal conductivity thereby increasing the thermoelectric figure of merit. Figures of merit as high as 2.5 have been achieved using layers of co-deposited gold and silicon dioxide interspersed with layers of silicon dioxide. The gold to silicon dioxide ratio was 0.04. 5 MeV silicon ions were used to irradiate the structure. Other metals and insulators may be substituted. Other ionizing radiation sources may be used. The structure tolerates a wide range of metal to insulator ratio.

  16. Analytic device including nanostructures

    KAUST Repository

    Di Fabrizio, Enzo M.

    2015-07-02

    A device for detecting an analyte in a sample comprising: an array including a plurality of pixels, each pixel including a nanochain comprising: a first nanostructure, a second nanostructure, and a third nanostructure, wherein size of the first nanostructure is larger than that of the second nanostructure, and size of the second nanostructure is larger than that of the third nanostructure, and wherein the first nanostructure, the second nanostructure, and the third nanostructure are positioned on a substrate such that when the nanochain is excited by an energy, an optical field between the second nanostructure and the third nanostructure is stronger than an optical field between the first nanostructure and the second nanostructure, wherein the array is configured to receive a sample; and a detector arranged to collect spectral data from a plurality of pixels of the array.

  17. Optically Reconfigurable Photonic Devices

    CERN Document Server

    Wang, Qian; Gholipour, Behrad; Wang, Chih-Ming; Yuan, Guanghui; Teng, Jinghua; Zheludev, Nikolay I

    2015-01-01

    Optoelectronic components with adjustable parameters, from variable-focal-length lenses to spectral filters that can change functionality upon stimulation, have enormous technological importance. Tuning of such components is conventionally achieved by either micro- or nano-mechanical actuation of their consitutive parts, stretching or application of thermal stimuli. Here we report a new dielectric metasurface platform for reconfigurable optical components that are created with light in a non-volatile and reversible fashion. Such components are written, erased and re-written as two-dimensional binary or grey-scale patterns into a nanoscale film of phase change material by inducing a refractive-index-changing phase-transition with tailored trains of femtosecond pulses. We combine germanium-antimony-tellurium-based films optimized for high-optical-contrast ovonic switching with a sub-wavelength-resolution optical writing process to demonstrate technologically relevant devices: visible-range reconfigurable bi-chr...

  18. False color viewing device

    Science.gov (United States)

    Kronberg, J.W.

    1992-10-20

    A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage. 7 figs.

  19. Integrated Ultrasonic-Photonic Devices

    DEFF Research Database (Denmark)

    Barretto, Elaine Cristina Saraiva

    This thesis deals with the modeling, design, fabrication and characterization of integrated ultrasonic-photonic devices, with particular focus on the use of standard semiconductor materials such as GaAs and silicon. The devices are based on the use of guided acoustic waves to modulate the light...... systems, all in search for paths to improve acousto-optic interaction. Some of the solutions proposed lead to enhancements of up to two orders of magnitude in the eciency of the device. The main aspects related to the design of the devices are discussed, including single-mode guidance, optical coupling......, integration and cost. The design proves to be robust towards fabrication and design tolerances. Several uses for this device are proposed, opening up a whole new group of applications for this class of integrated ultrasonic-photonic devices....

  20. Building Evacuation with Mobile Devices

    OpenAIRE

    Merkel, Sabrina

    2014-01-01

    The rapidly growing world population and increasingly dense settlements demand ever-larger and more complex buildings from today's engineers. In comparison to this technological progress, a building's equipment for emergency evacuation has been hardly developed further. This work presents a concept for a building evacuation system based on mobile devices. Furthermore, various algorithms for route planning with mobile devices and for indoor localization of mobile devices are addressed.

  1. Barriers to medical device innovation

    Directory of Open Access Journals (Sweden)

    Bergsl

    2014-06-01

    Full Text Available Jacob Bergsland, Ole Jakob Elle, Erik Fosse The Intervention Centre, Oslo University Hospital, Institute of Clinical Medicine, University of Oslo, Oslo, Norway Abstract: The US Food and Drug Administration (FDA has defined a medical device as a health care product that does not achieve it's purpose by chemical action or by being metabolized. This means that a vast number of products are considered medical devices. Such devices play an essential role in the practice of medicine. The FDA classifies medical devices in three classes, depending on the risk of the device. Since Class I and II devices have relatively simple requirements for getting to the market, this review will focus on “implantable devices”, which, in general, belong to Class III. The European Union and Canada use a slightly different classification system. While early generations of medical devices were introduced without much testing, either technical or clinical, the process of introducing a Class III medical device from concept to clinical practice has become strongly regulated and requires extensive technological and clinical testing. The modern era of implantable medical devices may be considered to have started in the 1920s with development of artificial hips. The implantable pacemaker was another milestone and pacemakers and cardioverters/defibrillators have since saved millions of lives and created commercial giants in the medical device industry. This review will include some examples of cardiovascular devices. Similar considerations apply to the total implantable device market, although clinical and technological applications obviously vary considerably. Keyword: implantable, FDA, regulation, CE-mark, innovation

  2. Barriers to medical device innovation

    OpenAIRE

    Bergsl; J.van*; Elle OJ; Fosse E

    2014-01-01

    Jacob Bergsland, Ole Jakob Elle, Erik Fosse The Intervention Centre, Oslo University Hospital, Institute of Clinical Medicine, University of Oslo, Oslo, Norway Abstract: The US Food and Drug Administration (FDA) has defined a medical device as a health care product that does not achieve it's purpose by chemical action or by being metabolized. This means that a vast number of products are considered medical devices. Such devices play an essential role in the practice of medicine. The FDA ...

  3. Barriers to medical device innovation

    OpenAIRE

    Bergsland, Jacob; Elle,Ole Jacob; Fosse, Erik

    2014-01-01

    Jacob Bergsland, Ole Jakob Elle, Erik Fosse The Intervention Centre, Oslo University Hospital, Institute of Clinical Medicine, University of Oslo, Oslo, Norway Abstract: The US Food and Drug Administration (FDA) has defined a medical device as a health care product that does not achieve it's purpose by chemical action or by being metabolized. This means that a vast number of products are considered medical devices. Such devices play an essential role in the practice of medicine. The ...

  4. Stabilizing Semiconductor Devices With Hydrogen

    Science.gov (United States)

    Overhauser, Albert W.; Maserjian, Joseph

    1989-01-01

    Damage by radiation healed rapidly. Feature provides continuous, rapid recovery of devices from degradation caused by hot electrons, photons, and ionizing radiation. Several candidate sites for palladium film catalysts, inserted during manufacture as integral parts of devices. Paladium films made by evaporation, sputtering, or chemical-vapor deposition. If additional storage required, thick layer of palladium plated on inside of package surrounding device. Hydrogen stored by exposing palladium to hydrogen gas just before package sealed hermetically.

  5. Mobile device security for dummies

    CERN Document Server

    Campagna, Rich; Krishnan, Ashwin

    2011-01-01

    The information you need to avoid security threats on corporate mobile devices Mobile devices have essentially replaced computers for corporate users who are on the go and there are millions of networks that have little to no security. This essential guide walks you through the steps for securing a network and building a bulletproof framework that will protect and support mobile devices in the enterprise. Featuring real-world case scenarios, this straightforward guide shares invaluable advice for protecting mobile devices from the loss of sensitive and confidential corporate informati

  6. Fibre Optic Communication Key Devices

    CERN Document Server

    Grote, Norbert

    2012-01-01

    The book gives an in-depth description of the key devices of current and next generation fibre optic communication networks. In particular, the book covers devices such as semiconductor lasers, optical amplifiers, modulators, wavelength filters, and detectors but the relevant properties of optical fibres as well. The presentations include the physical principles underlying the various devices, the technologies used for the realization of the different devices, typical performance characteristics and limitations, and development trends towards more advanced components are also illustrated. Thus the scope of the book spans relevant principles, state-of-the-art implementations, the status of current research and expected future components.

  7. Silicon nanowires as intracellular devices

    Science.gov (United States)

    Zimmerman, John F.

    Semiconductor nanowire devices are an exciting class of materials for biomedical and electrophysiology applications, with current studies primarily delivering substrate bound devices through mechanical abrasion or electroporation. However, the ability to distribute these devices in a drug-like fashion is an important step in developing next-generation active therapeutic devices. In this work, we will discuss the interaction of label free Silicon nanowires (SiNWs) with cellular systems, showing that they can be internalized in multiple cell lines, and undergo an active 'burst-like' transport process. (Abstract shortened by ProQuest.).

  8. Plasma detachment in linear devices

    Science.gov (United States)

    Ohno, N.

    2017-03-01

    Plasma detachment research in linear devices, sometimes called divertor plasma simulators, is reviewed. Pioneering works exploring the concept of plasma detachment were conducted in linear devices. Linear devices have contributed greatly to the basic understanding of plasma detachment such as volume plasma recombination processes, detached plasma structure associated with particle and energy transport, and other related issues including enhancement of convective plasma transport, dynamic response of plasma detachment, plasma flow reversal, and magnetic field effect. The importance of plasma detachment research using linear devices will be highlighted aimed at the design of future DEMO.

  9. Extraglottic airway devices: technology update

    Directory of Open Access Journals (Sweden)

    Sharma B

    2017-08-01

    Full Text Available Bimla Sharma, Chand Sahai, Jayashree Sood Department of Anaesthesiology, Pain and Perioperative Medicine, Sir Ganga Ram Hospital, New Delhi, India Abstract: Extraglottic airway devices (EADs have revolutionized the field of airway management. The invention of the laryngeal mask airway was a game changer, and since then, there have been several innovations to improve the EADs in design, functionality, safety and construction material. These have ranged from changes in the shape of the mask, number of cuffs and material used, like rubber, polyvinylchloride and latex. Phthalates, which were added to the construction material in order to increase device flexibility, were later omitted when this chemical was found to have serious adverse reproductive outcomes. The various designs brought out by numerous companies manufacturing EADs resulted in the addition of several devices to the airway market. These airway devices were put to use, many of them with inadequate or no evidence base regarding their efficacy and safety. To reduce the possibility of compromising the safety of the patient, the Difficult Airway Society (DAS formed the Airway Device Evaluation Project Team (ADEPT to strengthen the evidence base for airway equipment and vet the new extraglottic devices. A preuse careful analysis of the design and structure may help in better understanding of the functionality of a particular device. In the meantime, the search for the ideal EAD continues. Keywords: extraglottic airway devices, laryngeal mask airway, other extraglottic airway devices, safety, technology update

  10. Digital forensics for handheld devices

    CERN Document Server

    Doherty, Eamon P

    2012-01-01

    Approximately 80 percent of the world's population now owns a cell phone, which can hold evidence or contain logs about communications concerning a crime. Cameras, PDAs, and GPS devices can also contain information related to corporate policy infractions and crimes. Aimed to prepare investigators in the public and private sectors, Digital Forensics for Handheld Devices examines both the theoretical and practical aspects of investigating handheld digital devices. This book touches on all areas of mobile device forensics, including topics from the legal, technical, academic, and social aspects o

  11. Microbiopsy/precision cutting devices

    Science.gov (United States)

    Krulevitch, Peter A.; Lee, Abraham P.; Northrup, M. Allen; Benett, William J.

    1999-01-01

    Devices for performing tissue biopsy on a small scale (microbiopsy). By reducing the size of the biopsy tool and removing only a small amount of tissue or other material in a minimally invasive manner, the risks, costs, injury and patient discomfort associated with traditional biopsy procedures can be reduced. By using micromachining and precision machining capabilities, it is possible to fabricate small biopsy/cutting devices from silicon. These devices can be used in one of four ways 1) intravascularly, 2) extravascularly, 3) by vessel puncture, and 4) externally. Additionally, the devices may be used in precision surgical cutting.

  12. Cooling Devices in Laser therapy.

    Science.gov (United States)

    Das, Anupam; Sarda, Aarti; De, Abhishek

    2016-01-01

    Cooling devices and methods are now integrated into most laser systems, with a view to protecting the epidermis, reducing pain and erythema and improving the efficacy of laser. On the basis of method employed, it can be divided into contact cooling and non-contact cooling. With respect to timing of irradiation of laser, the nomenclatures include pre-cooling, parallel cooling and post-cooling. The choice of the cooling device is dictated by the laser device, the physician's personal choice with respect to user-friendliness, comfort of the patient, the price and maintenance costs of the device. We hereby briefly review the various techniques of cooling, employed in laser practice.

  13. 78 FR 1247 - Certain Electronic Devices, Including Wireless Communication Devices, Tablet Computers, Media...

    Science.gov (United States)

    2013-01-08

    ... COMMISSION Certain Electronic Devices, Including Wireless Communication Devices, Tablet Computers, Media... importation of certain electronic devices, including wireless communication devices, tablet computers, media... United States after importation of certain electronic devices, including wireless communication...

  14. 77 FR 58576 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers...

    Science.gov (United States)

    2012-09-21

    ... COMMISSION Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers, and... importation of certain wireless communication devices, portable music and data processing devices, computers... after importation of certain wireless communication devices, portable music and data processing...

  15. 77 FR 51571 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers...

    Science.gov (United States)

    2012-08-24

    ... COMMISSION Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers, and... communication devices, portable music and data processing devices, computers, and components thereof. The.... International Trade Commission has received a complaint entitled Wireless Communication Devices, Portable...

  16. 78 FR 12785 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and...

    Science.gov (United States)

    2013-02-25

    ... COMMISSION Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and... communication devices, portable music and data processing devices, computers and components thereof by reason of... evidence demonstrates that the existence of portable communication devices using ``touch sensitive...

  17. 21 CFR 882.5050 - Biofeedback device.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Biofeedback device. 882.5050 Section 882.5050 Food... DEVICES NEUROLOGICAL DEVICES Neurological Therapeutic Devices § 882.5050 Biofeedback device. (a) Identification. A biofeedback device is an instrument that provides a visual or auditory signal corresponding...

  18. 21 CFR 890.5525 - Iontophoresis device.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Iontophoresis device. 890.5525 Section 890.5525...) MEDICAL DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Therapeutic Devices § 890.5525 Iontophoresis device. (a) Iontophoresis device intended for certain specified uses—(1) Identification. An...

  19. Medical device alarms.

    Science.gov (United States)

    Borowski, Matthias; Görges, Matthias; Fried, Roland; Such, Olaf; Wrede, Christian; Imhoff, Michael

    2011-04-01

    The high number of false positive alarms has long been known to be a serious problem in critical care medicine - yet it remains unresolved. At the same time, threats to patient safety due to missing or suppressed alarms are being reported. The purpose of this paper is to present results from a workshop titled "Too many alarms? Too few alarms?" organized by the Section Patient Monitoring and the Workgroup Alarms of the German Association of Biomedical Engineering of the Association for Electrical, Electronic and Information Technologies. The current situation regarding alarms and their problems in intensive care, such as lack of clinical relevance, alarm fatigue, workload increases due to clinically irrelevant alarms, usability problems in alarm systems, problems with manuals and training, and missing alarms due to operator error are outlined, followed by a discussion of solutions and strategies to improve the current situation. Finally, the need for more research and development, focusing on signal quality considerations, networking of medical devices at the bedside, diagnostic alarms and predictive warnings, usability of alarm systems, education of healthcare providers, creation of annotated clinical databases for testing, standardization efforts, and patient monitoring in the regular ward, are called for.

  20. Simulation of semiconductor devices

    CERN Document Server

    Oriato, D

    2001-01-01

    cathode, made using an AIGaAs heterostructure step. Simulations show the importance of the insertion of a thin highly-doped layer between the transit region and the electron launcher in order to improve device operation. Chapter 5 is an introduction to Ill-nitrides, in particular GaN and its alloy ln-GaN. We outline the discrepancy in the elastic and piezoelectric parameters found in the literature. Strain, dislocations and piezoelectricity are presented as the main features of a InGaN/GaN system. In chapter 6 an extensive simulation of the dependence of the optical band gap of a single InGaN quantum well on the piezoelectric and spontaneous polarization is reported. Quantum Confined Stark Effect and screening mechanisms are found to play a major role. The simulation of a novel InGaN/GaN double quantum well LED is presented. A wide well is used to capture electrons that tunnels in a narrow well where they recombine with holes. Resonant asymmetric tunneling of electron and holes is used to increase the efficie...

  1. Virtual MIMO Beamforming and Device Pairing Enabled by Device-to-Device Communications for Multidevice Networks

    Directory of Open Access Journals (Sweden)

    Yeonjin Jeong

    2017-01-01

    Full Text Available We consider a multidevice network with asymmetric antenna configurations which supports not only communications between an access point and devices but also device-to-device (D2D communications for the Internet of things. For the network, we propose the transmit and receive beamforming with the channel state information (CSI for virtual multiple-input multiple-output (MIMO enabled by D2D receive cooperation. We analyze the sum rate achieved by a device pair in the proposed method and identify the strategies to improve the sum rate of the device pair. We next present a distributed algorithm and its equivalent algorithm for device pairing to maximize the throughput of the multidevice network. Simulation results confirm the advantages of the transmit CSI and D2D cooperation as well as the validity of the distributive algorithm.

  2. Selection of Air Terminal Device

    DEFF Research Database (Denmark)

    Nielsen, Peter V.

    This paper discusses the selection of the air terminal device for the experiments and numerical prediction in the International Energy Agency Annex 20 work: Air Flow Pattern within Buildings,......This paper discusses the selection of the air terminal device for the experiments and numerical prediction in the International Energy Agency Annex 20 work: Air Flow Pattern within Buildings,...

  3. Satellite and acoustic tracking device

    KAUST Repository

    Berumen, Michael L.

    2014-02-20

    The present invention relates a method and device for tracking movements of marine animals or objects in large bodies of water and across significant distances. The method and device can track an acoustic transmitter attached to an animal or object beneath the ocean surface by employing an unmanned surface vessel equipped with a hydrophone array and GPS receiver.

  4. Nanoscale wicking methods and devices

    Science.gov (United States)

    Zhou, Jijie (Inventor); Bronikowski, Michael (Inventor); Noca, Flavio (Inventor); Sansom, Elijah B. (Inventor)

    2011-01-01

    A fluid transport method and fluid transport device are disclosed. Nanoscale fibers disposed in a patterned configuration allow transport of a fluid in absence of an external power source. The device may include two or more fluid transport components having different fluid transport efficiencies. The components may be separated by additional fluid transport components, to control fluid flow.

  5. Wireless Power for Mobile Devices

    NARCIS (Netherlands)

    Waffenschmidt, E.

    2011-01-01

    Wireless power transfer allows a convenient, easy to use battery charging of mobile phones and other mobile devices. No hassle with cables and plugs, just place the device on a pad and that’s it. Such asystem even has the potential to become a standard charging solution. Where are the limits for

  6. Wound Healing Devices Brief Vignettes

    OpenAIRE

    Anderson, Caesar A.; Hare, Marc A.; Perdrizet, George A.

    2016-01-01

    Significance: The demand for wound care therapies is increasing. New wound care products and devices are marketed at a dizzying rate. Practitioners must make informed decisions about the use of medical devices for wound healing therapy. This paper provides updated evidence and recommendations based on a review of recent publications.

  7. Electrical nanogap devices for biosensing

    Directory of Open Access Journals (Sweden)

    Xing Chen

    2010-11-01

    Full Text Available For detecting substances that are invisible to the human eye or nose, and particularly those biomolecules, the devices must have very small feature sizes, be compact and provide a sufficient level of sensitivity, often to a small number of biomolecules that are just a few nanometres in size. Electrical nanogap devices for biosensing have emerged as a powerful technique for detecting very small quantities of biomolecules. The most charming feature of the devices is to directly transduce events of biomolecules specific binding into useful electrical signals such as resistance/impedance, capacitance/dielectric, or field-effect. Nanogap devices in electrical biosensing have become a busy area of research which is continually expanding. A wealth of research is available discussing planar and vertical nanogap devices for biosensing. Planar nanogap devices including label-free, gold nanoparticle-labeled, nanoparticles-enhanced, nanogapped gold particle film, and carbon nanotube nanogap devices as well as vertical nanogap devices with two and three terminals for biosensing are carefully reviewed. The aim of this paper is to provide an updated overview of the work in this field. In each part, we discuss the principles of operation of electrical biosensing and consider major strategies for enhancing their performance and/or key challenges and opportunities in current stages, and in their further development.

  8. Mixing in a Microfluid Device

    DEFF Research Database (Denmark)

    Hjorth, Poul G.; Deryabin, Mikhail

    Mixing of fluids in microchannels cannot rely on turbulence since the flow takes place at extremly low Reynolds numbers. Various active and passive devices have been developed to induce mixing in microfluid flow devices. We describe here a model of an active mixer where a transverse periodic flow...

  9. Documentation of Appliances & Interaction Devices

    DEFF Research Database (Denmark)

    2004-01-01

    The interaction devices and appliances explored in the WorkSPACE project, address spatial computing in the context of work. We have developed and explored a range of appliances and interaction devices. The scope has been to develop tools for support of collaboration by mixing digital and physical...

  10. Documentation of Appliances & Interaction Devices

    DEFF Research Database (Denmark)

    2004-01-01

    The interaction devices and appliances explored in the WorkSPACE project, address spatial computing in the context of work. We have developed and explored a range of appliances and interaction devices. The scope has been to develop tools for support of collaboration by mixing digital and physical...

  11. Wireless Power for Mobile Devices

    NARCIS (Netherlands)

    Waffenschmidt, E.

    2011-01-01

    Wireless power transfer allows a convenient, easy to use battery charging of mobile phones and other mobile devices. No hassle with cables and plugs, just place the device on a pad and that’s it. Such asystem even has the potential to become a standard charging solution. Where are the limits for suc

  12. Glass for Solid State Devices

    Science.gov (United States)

    Bailey, R. F.

    1982-01-01

    Glass film has low intrinsic compressive stress for isolating active layers of magnetic-bubble and other solid-state devices. Solid-state device structure incorporates low-stress glasses as barrier and spacer layers. Glass layers mechanically isolate substrate, conductor, and nickel/iron layers.

  13. Pressurized waterproof case electronic device

    KAUST Repository

    Berumen, Michael L.

    2013-01-31

    A pressurized waterproof case for an electronic device is particularly adapted for fluid-tight containment and operation of a touch-screen electronic device or the like therein at some appreciable water depth. In one example, the case may be formed as an enclosure having an open top panel or face covered by a flexible, transparent membrane or the like for the operation of the touchscreen device within the case. A pressurizing system is provided for the case to pressurize the case and the electronic device therein to slightly greater than ambient in order to prevent the external water pressure from bearing against the transparent membrane and pressing it against the touch screen, thereby precluding operation of the touch screen device within the case. The pressurizing system may include a small gas cartridge or may be provided from an external source.

  14. Device Applications of Nonlinear Dynamics

    CERN Document Server

    Baglio, Salvatore

    2006-01-01

    This edited book is devoted specifically to the applications of complex nonlinear dynamic phenomena to real systems and device applications. While in the past decades there has been significant progress in the theory of nonlinear phenomena under an assortment of system boundary conditions and preparations, there exist comparatively few devices that actually take this rich behavior into account. "Device Applications of Nonlinear Dynamics" applies and exploits this knowledge to make devices which operate more efficiently and cheaply, while affording the promise of much better performance. Given the current explosion of ideas in areas as diverse as molecular motors, nonlinear filtering theory, noise-enhanced propagation, stochastic resonance and networked systems, the time is right to integrate the progress of complex systems research into real devices.

  15. Surgical tools and medical devices

    CERN Document Server

    Jackson, Mark

    2016-01-01

    This new edition presents information and knowledge on the field of biomedical devices and surgical tools. The authors look at the interactions between nanotechnology, nanomaterials, design, modeling, and tools for surgical and dental applications, as well as how nanostructured surfaces can be created for the purposes of improving cell adhesion between medical devices and the human body. Each original chapter is revised in this second edition and describes developments in coatings for heart valves, stents, hip and knee joints, cardiovascular devices, orthodontic applications, and regenerative materials such as bone substitutes. There are also 8 new chapters that address: Microvascular anastomoses Inhaler devices used for pulmonary delivery of medical aerosols Surface modification of interference screws Biomechanics of the mandible (a detailed case study) Safety and medical devices The synthesis of nanostructured material Delivery of anticancer molecules using carbon nanotubes Nano and micro coatings for medic...

  16. Content Sharing for Mobile Devices

    CERN Document Server

    Ball, Rudi

    2008-01-01

    The miniaturisation of computing devices has seen computing devices become increasingly pervasive in society. With this increased pervasiveness, the technologies of small computing devices have also improved. Mobile devices are now capable of capturing various forms of multimedia and able to communicate wirelessly using increasing numbers of communication techniques. The owners and creators of local content are motivated to share this content in ever increasing volume; the conclusion has been that social networks sites are seeing a revolution in the sharing of information between communities of people. As load on centralised systems increases, we present a novel decentralised peer-to-peer approach dubbed the Market Contact Protocol (MCP) to achieve cost effective, scalable and efficient content sharing using opportunistic networking (pocket switched networking), incentive, context-awareness, social contact and mobile devices. Within the report we describe how the MCP is simulated with a superimposed geographi...

  17. High voltage semiconductor devices and methods of making the devices

    Energy Technology Data Exchange (ETDEWEB)

    Matocha, Kevin; Chatty, Kiran; Banerjee, Sujit

    2017-02-28

    A multi-cell MOSFET device including a MOSFET cell with an integrated Schottky diode is provided. The MOSFET includes n-type source regions formed in p-type well regions which are formed in an n-type drift layer. A p-type body contact region is formed on the periphery of the MOSFET. The source metallization of the device forms a Schottky contact with an n-type semiconductor region adjacent the p-type body contact region of the device. Vias can be formed through a dielectric material covering the source ohmic contacts and/or Schottky region of the device and the source metallization can be formed in the vias. The n-type semiconductor region forming the Schottky contact and/or the n-type source regions can be a single continuous region or a plurality of discontinuous regions alternating with discontinuous p-type body contact regions. The device can be a SiC device. Methods of making the device are also provided.

  18. Class 1 devices case studies in medical devices design

    CERN Document Server

    Ogrodnik, Peter J

    2014-01-01

    The Case Studies in Medical Devices Design series consists of practical, applied case studies relating to medical device design in industry. These titles complement Ogrodnik's Medical Device Design and will assist engineers with applying the theory in practice. The case studies presented directly relate to Class I, Class IIa, Class IIb and Class III medical devices. Designers and companies who wish to extend their knowledge in a specific discipline related to their respective class of operation will find any or all of these titles a great addition to their library. Class 1 Devices is a companion text to Medical Devices Design: Innovation from Concept to Market. The intention of this book, and its sister books in the series, is to support the concepts presented in Medical Devices Design through case studies. In the context of this book the case studies consider Class I (EU) and 510(k) exempt (FDA) . This book covers classifications, the conceptual and embodiment phase, plus design from idea to PDS. These title...

  19. Ontology-Based Device Descriptions and Device Repository for Building Automation Devices

    Directory of Open Access Journals (Sweden)

    Dibowski Henrik

    2011-01-01

    Full Text Available Device descriptions play an important role in the design and commissioning of modern building automation systems and help reducing the design time and costs. However, all established device descriptions are specialized for certain purposes and suffer from several weaknesses. This hinders a further design automation, which is strongly needed for the more and more complex building automation systems. To overcome these problems, this paper presents novel Ontology-based Device Descriptions (ODDs along with a layered ontology architecture, a specific ontology view approach with virtual properties, a generic access interface, a triple store-based database backend, and a generic search mask GUI with underlying query generation algorithm. It enables a formal, unified, and extensible specification of building automation devices, ensures their comparability, and facilitates a computer-enabled retrieval, selection, and interoperability evaluation, which is essential for an automated design. The scalability of the approach to several ten thousand devices is demonstrated.

  20. Probing a Device's Active Atoms.

    Science.gov (United States)

    Studniarek, Michał; Halisdemir, Ufuk; Schleicher, Filip; Taudul, Beata; Urbain, Etienne; Boukari, Samy; Hervé, Marie; Lambert, Charles-Henri; Hamadeh, Abbass; Petit-Watelot, Sebastien; Zill, Olivia; Lacour, Daniel; Joly, Loïc; Scheurer, Fabrice; Schmerber, Guy; Da Costa, Victor; Dixit, Anant; Guitard, Pierre André; Acosta, Manuel; Leduc, Florian; Choueikani, Fadi; Otero, Edwige; Wulfhekel, Wulf; Montaigne, François; Monteblanco, Elmer Nahuel; Arabski, Jacek; Ohresser, Philippe; Beaurepaire, Eric; Weber, Wolfgang; Alouani, Mébarek; Hehn, Michel; Bowen, Martin

    2017-05-01

    Materials science and device studies have, when implemented jointly as "operando" studies, better revealed the causal link between the properties of the device's materials and its operation, with applications ranging from gas sensing to information and energy technologies. Here, as a further step that maximizes this causal link, the paper focuses on the electronic properties of those atoms that drive a device's operation by using it to read out the materials property. It is demonstrated how this method can reveal insight into the operation of a macroscale, industrial-grade microelectronic device on the atomic level. A magnetic tunnel junction's (MTJ's) current, which involves charge transport across different atomic species and interfaces, is measured while these atoms absorb soft X-rays with synchrotron-grade brilliance. X-ray absorption is found to affect magnetotransport when the photon energy and linear polarization are tuned to excite FeO bonds parallel to the MTJ's interfaces. This explicit link between the device's spintronic performance and these FeO bonds, although predicted, challenges conventional wisdom on their detrimental spintronic impact. The technique opens interdisciplinary possibilities to directly probe the role of different atomic species on device operation, and shall considerably simplify the materials science iterations within device research. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. High voltage MOSFET devices and methods of making the devices

    Energy Technology Data Exchange (ETDEWEB)

    Banerjee, Sujit; Matocha, Kevin; Chatty, Kiran

    2015-12-15

    A SiC MOSFET device having low specific on resistance is described. The device has N+, P-well and JFET regions extended in one direction (Y-direction) and P+ and source contacts extended in an orthogonal direction (X-direction). The polysilicon gate of the device covers the JFET region and is terminated over the P-well region to minimize electric field at the polysilicon gate edge. In use, current flows vertically from the drain contact at the bottom of the structure into the JFET region and then laterally in the X direction through the accumulation region and through the MOSFET channels into the adjacent N+ region. The current flowing out of the channel then flows along the N+ region in the Y-direction and is collected by the source contacts and the final metal. Methods of making the device are also described.

  2. Mobile device-to-device distributed computing using data sets

    OpenAIRE

    Remédios, Diogo; Teófilo, António; Paulino, Hervé; Lourenço, João

    2015-01-01

    The rapidly increasing computing power, available storage and communication capabilities of mobile devices makes it possible to start processing and storing data locally, rather than offloading it to remote servers; allowing scenarios of mobile clouds without infrastructure dependency. We can now aim at connecting neighboring mobile devices, creating a local mobile cloud that provides storage and computing services on local generated data. In this paper, we describe an early overview of a dis...

  3. Giant magneto-resistance devices

    CERN Document Server

    Hirota, Eiichi; Inomata, Koichiro

    2002-01-01

    This book deals with the application of giant magneto-resistance (GMR) effects to electronic devices. It will appeal to engineers and graduate students in the fields of electronic devices and materials. The main subjects are magnetic sensors with high resolution and magnetic read heads with high sensitivity, required for hard-disk drives with recording densities of several gigabytes. Another important subject is novel magnetic random-access memories (MRAM) with non-volatile non-destructive and radiation-resistant characteristics. Other topics include future GMR devices based on bipolar spin transistors, spin field-effect transistors (FETs) and double-tunnel junctions.

  4. Life cycle of mobile devices

    Directory of Open Access Journals (Sweden)

    T.V. Rohal

    2011-12-01

    Full Text Available Article is devoted features of life cycle of mobile devices. The article highlighted a number of disadvantages associated with managing the life cycle of the product. Disadvantages include the orientation is not on the quality of mobile devices and their design, the obsolescence of digital products. The article drew attention to the need for process improvement life cycle management of mobile devices. For since this type of product is now the most popular among the population, consumers are interested, first of all, quality, and only then, look good.

  5. Portable Heat Pump Testing Device

    Directory of Open Access Journals (Sweden)

    Kłosowiak R.

    2015-08-01

    Full Text Available The aim of this paper is to present the design and working principle of a portable testing device for heat pumps in the energy recirculation system. The presented test stand can be used for any refrigerating/reverse flow cycle device to calculate the device energy balance. The equipment is made of two portable containers of the capacity of 250 liters to simulate the air heat source and ground heat source with a system of temperature stabilization, compressor heat pump of the coefficient of performance (COP of = 4.3, a failsafe system and a control and measurement system.

  6. Skin-inspired electronic devices

    Directory of Open Access Journals (Sweden)

    Alex Chortos

    2014-09-01

    Full Text Available Electronic devices that mimic the properties of skin have potential important applications in advanced robotics, prosthetics, and health monitoring technologies. Methods for measuring tactile and temperature signals have progressed rapidly due to innovations in materials and processing methods. Imparting skin-like stretchability to electronic devices can be accomplished by patterning traditional electronic materials or developing new materials that are intrinsically stretchable. The incorporation of sensing methods with transistors facilitates large-area sensor arrays. While sensor arrays have surpassed the properties of human skin in terms of sensitivity, time response, and device density, many opportunities remain for future development.

  7. Arrhythmia management after device removal

    Directory of Open Access Journals (Sweden)

    Nobuhiro Nishii, MD

    2016-08-01

    Full Text Available Arrhythmic management is needed after removal of cardiac implantable electronic devices (CIEDs. Patients completely dependent on CIEDs need temporary device back-up until new CIEDs are implanted. Various methods are available for device back-up, and the appropriate management varies among patients. The duration from CIED removal to implantation of a new CIED also differs among patients. Temporary pacing is needed for patients with bradycardia, a wearable cardioverter defibrillator (WCD or catheter ablation is needed for patients with tachyarrhythmia, and sequential pacing is needed for patients dependent on cardiac resynchronization therapy. The present review focuses on arrhythmic management after CIED removal.

  8. The apo riboswitch as a molecular hydra.

    Science.gov (United States)

    Wedekind, Joseph E

    2010-07-14

    Riboswitches "sense" metabolites but knowledge is sparse for structures without bound ligand. Stoddard et al. (2010) determined an apo riboswitch structure "closed" to metabolite binding. Further SAXS, biochemical, and computational analyses support ensemble behavior with interconverting open and closed conformations.

  9. The Apo Riboswitch as a Molecular Hydra

    OpenAIRE

    Wedekind, Joseph E.

    2010-01-01

    Riboswitches ‘sense’ metabolites but knowledge is sparse for structures without bound ligand. Stoddard et al. (2010) determined an apo riboswitch structure ‘closed’ to metabolite binding. Further SAXS, biochemical and computational analyses support ensemble behavior with interconverting open and closed conformations.

  10. Intercellular junctions in nerve-free hydra

    DEFF Research Database (Denmark)

    McDowall, A W; Grimmelikhuijzen, C J

    1980-01-01

    with particles in an "enplaque conformation appearing as a raised plateau on the E-face or as a depression on the P-face; (ii) structures morphologically similar to gap junctions in rat liver, containing particles on the P-face and corresponding pits on the E-face, both having hexagonal packing with a lattice...

  11. 21 CFR 801.109 - Prescription devices.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Prescription devices. 801.109 Section 801.109 Food... DEVICES LABELING Exemptions From Adequate Directions for Use § 801.109 Prescription devices. A device... direct the use of such device, and hence for which “adequate directions for use” cannot be...

  12. 16 CFR 1507.8 - Wheel devices.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Wheel devices. 1507.8 Section 1507.8... FIREWORKS DEVICES § 1507.8 Wheel devices. Drivers in fireworks devices commonly known as “wheels” shall be securely attached to the device so that they will not come loose in transportation, handling, and...

  13. Developing Linux kernel space device driver

    Institute of Scientific and Technical Information of China (English)

    Zheng Wei; Wang Qinruo; Wu Naiyou

    2003-01-01

    This thesis introduces how to develop kernel level device drivers on Linux platform in detail. On the basis of comparing proc file system with dev file system, we choose PCI devices and USB devices as instances to introduce the method of writing device drivers for character devices by using these two file systems.

  14. Polymer electronic devices and materials.

    Energy Technology Data Exchange (ETDEWEB)

    Schubert, William Kent; Baca, Paul Martin; Dirk, Shawn M.; Anderson, G. Ronald; Wheeler, David Roger

    2006-01-01

    Polymer electronic devices and materials have vast potential for future microsystems and could have many advantages over conventional inorganic semiconductor based systems, including ease of manufacturing, cost, weight, flexibility, and the ability to integrate a wide variety of functions on a single platform. Starting materials and substrates are relatively inexpensive and amenable to mass manufacturing methods. This project attempted to plant the seeds for a new core competency in polymer electronics at Sandia National Laboratories. As part of this effort a wide variety of polymer components and devices, ranging from simple resistors to infrared sensitive devices, were fabricated and characterized. Ink jet printing capabilities were established. In addition to promising results on prototype devices the project highlighted the directions where future investments must be made to establish a viable polymer electronics competency.

  15. #DDOD: Establishment Registration & Device Listing

    Data.gov (United States)

    U.S. Department of Health & Human Services — SUMMARY DDOD use case to request means on consolidating multiple data sources (MDR, PMA, 510(k), R&L) in order to build a list of all marketed medical devices....

  16. Silicon photonics fundamentals and devices

    CERN Document Server

    Deen, M Jamal

    2012-01-01

    The creation of affordable high speed optical communications using standard semiconductor manufacturing technology is a principal aim of silicon photonics research. This would involve replacing copper connections with optical fibres or waveguides, and electrons with photons. With applications such as telecommunications and information processing, light detection, spectroscopy, holography and robotics, silicon photonics has the potential to revolutionise electronic-only systems. Providing an overview of the physics, technology and device operation of photonic devices using exclusively silicon and related alloys, the book includes: * Basic Properties of Silicon * Quantum Wells, Wires, Dots and Superlattices * Absorption Processes in Semiconductors * Light Emitters in Silicon * Photodetectors , Photodiodes and Phototransistors * Raman Lasers including Raman Scattering * Guided Lightwaves * Planar Waveguide Devices * Fabrication Techniques and Material Systems Silicon Photonics: Fundamentals and Devices outlines ...

  17. Mechatronic Device for Locomotor Training

    Directory of Open Access Journals (Sweden)

    Duda Sławomir

    2016-12-01

    Full Text Available This paper presents a novel mechatronic device to support a gait reeducation process. The conceptual works were done by the interdisciplinary design team. This collaboration allowed to perform a device that would connect the current findings in the fields of biomechanics and mechatronics. In the first part of the article shown a construction of the device which is based on the structure of an overhead travelling crane. The rest of the article contains the issues related to machine control system. In the prototype, the control of drive system is conducted by means of two RT-DAC4/PCI real time cards connected with a signal conditioning interface. Authors present the developed control algorithms and optimization process of the controller settings values. The summary contains a comparison of some numerical simulation results and experimental data from the sensors mounted on the device. The measurement data were obtained during the gait of a healthy person.

  18. Nanomechanical Water Purification Device Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Seldon Laboratories, LLC, proposes a lightweight, low-pressure water filtration device that harnesses the unique properties of nanoparticles to destroy or remove...

  19. Heart failure - surgeries and devices

    Science.gov (United States)

    ... is weakened, gets too large, and does not pump blood very well, you are at high risk for abnormal heartbeats that can lead to sudden cardiac death. An implantable cardioverter-defibrillator (ICD) is a device that detects ...

  20. Nanomechanical Water Purification Device Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Seldon Laboratories, LLC, proposes a lightweight, low-pressure water purification device that harnesses the unique properties of carbon nanotubes and will operate...

  1. Thermoelectric Devices Advance Thermal Management

    Science.gov (United States)

    2007-01-01

    Thermoelectric (TE) devices heat, cool, and generate electricity when a temperature differential is provided between the two module faces. In cooperation with NASA, Chico, California-based United States Thermoelectric Consortium Inc. (USTC) built a gas emissions analyzer (GEA) for combustion research. The GEA precipitated hydrocarbon particles, preventing contamination that would hinder precise rocket fuel analysis. The USTC research and design team uses patent-pending dimple, pin-fin, microchannel and microjet structures to develop and design heat dissipation devices on the mini-scale level, which not only guarantee high performance of products, but also scale device size from 1 centimeter to 10 centimeters. USTC continues to integrate the benefits of TE devices in its current line of thermal management solutions and has found the accessibility of NASA technical research to be a valuable, sustainable resource that has continued to positively influence its product design and manufacturing

  2. Prototype of sun projector device

    Science.gov (United States)

    Ihsan; Dermawan, B.

    2016-11-01

    One way to introduce astronomy to public, including students, can be handled by solar observation. The widely held device for this purpose is coelostat and heliostat. Besides using filter attached to a device such as telescope, it is safest to use indirect way for observing the Sun. The main principle of the indirect way is deflecting the sun light and projecting image of the sun on a screen. We design and build a simple and low-cost astronomical device, serving as a supplement to increase public service, especially for solar observation. Without using any digital and intricate supporting equipment, people can watch and relish image of the Sun in comfortable condition, i.e. in a sheltered or shady place. Here we describe a design and features of our prototype of the device, which still, of course, has some limitations. In the future, this prototype can be improved for more efficient and useful applications.

  3. OLED devices with internal outcoupling

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jr., Jie Jerry; Sista, Srinivas Prasad; Shi, Xiaolei; Zhao, Ri-An; Chichak, Kelly Scott; Youmans, Jeffrey Michael; Janora, Kevin Henry; Turner, Larry Gene

    2016-12-06

    Optoelectronic devices with enhanced internal outcoupling include a substrate, an anode, a cathode, an electroluminescent layer, and an electron transporting layer comprising inorganic nanoparticles dispersed in an organic matrix.

  4. Marine Thermoelectric Devices and Installations,

    Science.gov (United States)

    thermoelectric devices and units as marine sources of electric power, Prospects for the use of thermoelectric generators in main ship propulsion plants, Electric propulsion complexes for marine thermoelectric plants).

  5. Cooling devices in laser therapy

    Directory of Open Access Journals (Sweden)

    Anupam Das

    2016-01-01

    Full Text Available Cooling devices and methods are now integrated into most laser systems, with a view to protecting the epidermis, reducing pain and erythema and improving the efficacy of laser. On the basis of method employed, it can be divided into contact cooling and non-contact cooling. With respect to timing of irradiation of laser, the nomenclatures include pre-cooling, parallel cooling and post-cooling. The choice of the cooling device is dictated by the laser device, the physician′s personal choice with respect to user-friendliness, comfort of the patient, the price and maintenance costs of the device. We hereby briefly review the various techniques of cooling, employed in laser practice.

  6. Metal semiconductor contacts and devices

    CERN Document Server

    Cohen, Simon S; Einspruch, Norman G

    1986-01-01

    VLSI Electronics Microstructure Science, Volume 13: Metal-Semiconductor Contacts and Devices presents the physics, technology, and applications of metal-semiconductor barriers in digital integrated circuits. The emphasis is placed on the interplay among the theory, processing, and characterization techniques in the development of practical metal-semiconductor contacts and devices.This volume contains chapters that are devoted to the discussion of the physics of metal-semiconductor interfaces and its basic phenomena; fabrication procedures; and interface characterization techniques, particularl

  7. A coke preparedness monitoring device

    Energy Technology Data Exchange (ETDEWEB)

    Sazanov, V.F.; Bannikov, L.S.; Chepurnykh, S.F.; Dobromobov, Yu.I.; Pankrat' ev, O.N.; Pinchuk, S.I.; Shifrin, S.I.

    1982-01-01

    A coke preparedness monitoring device for a door extractor contains sounding electrodes, a stabilized voltage source and a meter to record the electrical resistance of the coke. In order to provide monitoring capacity of the preparedness of the coke in the flow and to increase measuring accuracy the device contains sounding electrodes in the coke-treating door extractor; these are connected together with the recorder via an additional stabilized power supply to a stabilized voltage source.

  8. Trustworthy execution on mobile devices

    CERN Document Server

    Vasudevan, Amit; Newsome, James

    2013-01-01

    This brief considers the various stakeholders in today's mobile device ecosystem, and analyzes why widely-deployed hardware security primitives on mobile device platforms are inaccessible to application developers and end-users. Existing proposals are also evaluated for leveraging such primitives, and proves that they can indeed strengthen the security properties available to applications and users, without reducing the properties currently enjoyed by OEMs and network carriers. Finally, this brief makes recommendations for future research that may yield practical and deployable results.

  9. Biomedical devices and their applications

    CERN Document Server

    2004-01-01

    This volume introduces readers to the basic concepts and recent advances in the field of biomedical devices. The text gives a detailed account of novel developments in drug delivery, protein electrophoresis, estrogen mimicking methods and medical devices. It also provides the necessary theoretical background as well as describing a wide range of practical applications. The level and style make this book accessible not only to scientific and medical researchers but also to graduate students.

  10. Ultraviolet-visible nanophotonic devices

    OpenAIRE

    2010-01-01

    Ankara : The Department of Electrical and Electronics Engineering and the Institute of Engineering and Sciences of Bilkent University, 2010. Thesis (Ph. D.) -- Bilkent University, 2010. Includes bibliographical references leaves 130-141. Recently in semiconductor market, III-Nitride materials and devices are of much interest due to their mechanical strength, radiation resistance, working in the spectrum from visible down to the deep ultraviolet region and solar-blind device ...

  11. Piezo-phototronic effect devices

    Science.gov (United States)

    Wang, Zhong L.; Yang, Qing

    2013-09-10

    A semiconducting device includes a piezoelectric structure that has a first end and an opposite second end. A first conductor is in electrical communication with the first end and a second conductor is in electrical communication with the second end so as to form an interface therebetween. A force applying structure is configured to maintain an amount of strain in the piezoelectric member sufficient to generate a desired electrical characteristic in the semiconducting device.

  12. Nanofabrication of Hybrid Optoelectronic Devices

    Science.gov (United States)

    Dibos, Alan Michael

    The material requirements for optoelectronic devices can vary dramatically depending on the application. Often disparate material systems need to be combined to allow for full device functionality. At the nanometer scale, this can often be challenging because of the inherent chemical and structural incompatibilities of nanofabrication. This dissertation concerns the integration of seemingly dissimilar materials into hybrid optoelectronic devices for photovoltaic, plasmonic, and photonic applications. First, we show that combining a single strip of conjugated polymer and inorganic nanowire can yield a nanoscale solar cell, and modeling of optical absorption and exciton diffusion in this device can provide insight into the efficiency of charge separation. Second, we use an on-chip nanowire light emitting diode to pump a colloidal quantum dot coupled to a silver waveguide. The resulting device is an electro-optic single plasmon source. Finally, we transfer diamond waveguides onto near-field avalanche photodiodes fabricated from GaAs. Embedded in the diamond waveguides are nitrogen vacancy color centers, and the mapping of emission from these single-photon sources is demonstrated using our on-chip detectors, eliminating the need for external photodetectors on an optical table. These studies show the promise of hybrid optoelectronic devices at the nanoscale with applications in alternative energy, optical communication, and quantum optics.

  13. Computational Hemodynamics Involving Artificial Devices

    Science.gov (United States)

    Kwak, Dochan; Kiris, Cetin; Feiereisen, William (Technical Monitor)

    2001-01-01

    This paper reports the progress being made towards developing complete blood flow simulation capability in human, especially, in the presence of artificial devices such as valves and ventricular assist devices. Devices modeling poses unique challenges different from computing the blood flow in natural hearts and arteries. There are many elements needed such as flow solvers, geometry modeling including flexible walls, moving boundary procedures and physiological characterization of blood. As a first step, computational technology developed for aerospace applications was extended in the recent past to the analysis and development of mechanical devices. The blood flow in these devices is practically incompressible and Newtonian, and thus various incompressible Navier-Stokes solution procedures can be selected depending on the choice of formulations, variables and numerical schemes. Two primitive variable formulations used are discussed as well as the overset grid approach to handle complex moving geometry. This procedure has been applied to several artificial devices. Among these, recent progress made in developing DeBakey axial flow blood pump will be presented from computational point of view. Computational and clinical issues will be discussed in detail as well as additional work needed.

  14. 77 FR 60720 - Certain Electronic Devices, Including Wireless Commmunication Devices, Portable Music and Data...

    Science.gov (United States)

    2012-10-04

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Certain Electronic Devices, Including Wireless Commmunication Devices, Portable Music and Data... infringing electronic devices, including wireless communication devices, portable music and data processing...

  15. 77 FR 52759 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and...

    Science.gov (United States)

    2012-08-30

    ... COMMISSION Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and... importation of certain wireless communication devices, portable music and data processing devices, computers... to a data communications system.'' The Commission has determined to affirm the ID's finding...

  16. 78 FR 24775 - Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and...

    Science.gov (United States)

    2013-04-26

    ... COMMISSION Certain Wireless Communication Devices, Portable Music and Data Processing Devices, Computers and... United States after importation of certain wireless communication devices, portable music and data processing devices, computers and components thereof by reason of ] infringement of certain claims of...

  17. High speed serdes devices and applications

    CERN Document Server

    Stauffer, David R; Sorna, Michael A; Dramstad, Kent; Ogilvie, Clarence Rosser; Amanullah, Mohammad; Rockrohr, James Donald

    2008-01-01

    Offers an understanding of the features and functions typically found on HSS devices. This book explains how these HSS devices are used in protocol applications and the analysis which must be performed to use such HSS devices.

  18. 75 FR 16351 - Medical Devices; Technical Amendment

    Science.gov (United States)

    2010-04-01

    ... protection. 21 CFR Part 1020 Electronic products, Medical devices, Radiation protection, Reporting and... protection. 21 CFR Part 1040 Electronic products, Labeling, Lasers, Medical devices, Radiation protection, Reporting and recordkeeping requirements. 21 CFR Part 1050 Electronic products, Medical devices,...

  19. Novel Concepts for Device to Device Communication using Network Coding

    DEFF Research Database (Denmark)

    Pahlevani, Peyman; Hundebøll, Martin; Pedersen, Morten Videbæk

    2014-01-01

    Device-to-device communication is currently a hot research topic within 3GPP. Even though D2D communication has been part of previous ad hoc, meshed and sensor networks proposals, the main contribution by 3GPP is that the direct communication among two devices is carried out over a dynamically...... assigned, licensed spectrum; thus, it is under full control of the cellular network. D2D communication creates a market potential for new services, new approaches to efficient spectrum use, and security concepts. This is especially true if D2D communication is extended to larger communication groups...... organized in meshed clusters. In this article, we discuss the potential and shortcomings of D2D communication as proposed today, advocating for the use of network coding as an enabling technology for enhanced security and communication efficiency using the PlayNCool and CORE protocols as key examples...

  20. Light-Emitting Devices with Conjugated Polymers

    Directory of Open Access Journals (Sweden)

    Xian-Yu Deng

    2011-03-01

    Full Text Available This article introduces a previous study and tremendous progress in basic theoretical modeling, material developments and device engineering for polymer light-emitting devices (PLEDs.

  1. 16 CFR 1507.9 - Toy smoke devices and flitter devices.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Toy smoke devices and flitter devices. 1507... SUBSTANCES ACT REGULATIONS FIREWORKS DEVICES § 1507.9 Toy smoke devices and flitter devices. (a) Toy smoke... fuse and firstfire upon ignition) during normal operation. (b) Toy smoke devices and flitter...

  2. Resource management for device-to-device underlay communication

    CERN Document Server

    Song, Lingyang; Xu, Chen

    2013-01-01

    Device-to-Device (D2D) communication will become a key feature supported by next generation cellular networks, a topic of enormous importance to modern communication. Currently, D2D serves as an underlay to the cellular network as a means to increase spectral efficiency. Although D2D communication brings large benefits in terms of system capacity, it also causes interference as well as increased computation complexity to cellular networks as a result of spectrum sharing. Thus, efficient resource management must be performed to guarantee a target performance level of cellular communication.This

  3. An Overview of Biofield Devices.

    Science.gov (United States)

    Muehsam, David; Chevalier, Gaétan; Barsotti, Tiffany; Gurfein, Blake T

    2015-11-01

    Advances in biophysics, biology, functional genomics, neuroscience, psychology, psychoneuroimmunology, and other fields suggest the existence of a subtle system of "biofield" interactions that organize biological processes from the subatomic, atomic, molecular, cellular, and organismic to the interpersonal and cosmic levels. Biofield interactions may bring about regulation of biochemical, cellular, and neurological processes through means related to electromagnetism, quantum fields, and perhaps other means of modulating biological activity and information flow. The biofield paradigm, in contrast to a reductionist, chemistry-centered viewpoint, emphasizes the informational content of biological processes; biofield interactions are thought to operate in part via low-energy or "subtle" processes such as weak, nonthermal electromagnetic fields (EMFs) or processes potentially related to consciousness and nonlocality. Biofield interactions may also operate through or be reflected in more well-understood informational processes found in electroencephalographic (EEG) and electrocardiographic (ECG) data. Recent advances have led to the development of a wide variety of therapeutic and diagnostic biofield devices, defined as physical instruments best understood from the viewpoint of a biofield paradigm. Here, we provide a broad overview of biofield devices, with emphasis on those devices for which solid, peer-reviewed evidence exists. A subset of these devices, such as those based upon EEG- and ECG-based heart rate variability, function via mechanisms that are well understood and are widely employed in clinical settings. Other device modalities, such a gas discharge visualization and biophoton emission, appear to operate through incompletely understood mechanisms and have unclear clinical significance. Device modes of operation include EMF-light, EMF-heat, EMF-nonthermal, electrical current, vibration and sound, physical and mechanical, intentionality and nonlocality, gas and

  4. Graphene based flexible electrochromic devices.

    Science.gov (United States)

    Polat, Emre O; Balcı, Osman; Kocabas, Coskun

    2014-10-01

    Graphene emerges as a viable material for optoelectronics because of its broad optical response and gate-tunable properties. For practical applications, however, single layer graphene has performance limits due to its small optical absorption defined by fundamental constants. Here, we demonstrated a new class of flexible electrochromic devices using multilayer graphene (MLG) which simultaneously offers all key requirements for practical applications; high-contrast optical modulation over a broad spectrum, good electrical conductivity and mechanical flexibility. Our method relies on electro-modulation of interband transition of MLG via intercalation of ions into the graphene layers. The electrical and optical characterizations reveal the key features of the intercalation process which yields broadband optical modulation up to 55 per cent in the visible and near-infrared. We illustrate the promises of the method by fabricating reflective/transmissive electrochromic devices and multi-pixel display devices. Simplicity of the device architecture and its compatibility with the roll-to-roll fabrication processes, would find wide range of applications including smart windows and display devices. We anticipate that this work provides a significant step in realization of graphene based optoelectronics.

  5. Intra-uterine contraceptive devices.

    Science.gov (United States)

    Elias, J

    1985-05-01

    Among the advantages of IUDs are the device's high continuation rate, the lack of systemic side effects, and the absence of a need for continual motivation to practice contraception. The effectiveness of plastic IUDs is directly proportional to their surface area, but the degree of excessive bleeding experienced is inversely related to device size. Thus, devices represent a compromise between large size for effectiveness and small size for acceptability. The optimum time to fit an IUD is during the 1st hald of the menstrual cycle. Absolute contraindications to IUD use include the presence of active pelvic inflammatory disease, undiagnosed irregular bleeding, a history of ectopic pregnancy or tubal surgery, and a distorted uteine cavity. Failure rates associated with IUD use range from 2-3% in the 1st year and then decrease. Since the main mechanism of action appears to be production of a sterile inflammatory reaction in the uterine cavity, the IUD prevents intrauterine pregnancy more effectively than ectopic pregnancy. Nonetheless, there is little evidence to suggest that IUD use actually increases the incidence of ectopic pregnancy. Resumption of fertility after IUD removal is not delayed. There is not need to change inert plastic IUDs in women who remain symptom free. The copper devices should be changed every 3-4 years. A search is under way for antifertility agents that can be incorporated into the device to reduce side effects. In general, the IUD is most suitable for older, parous women.

  6. Survey of cryogenic semiconductor devices

    Energy Technology Data Exchange (ETDEWEB)

    Talarico, L.J.; McKeever, J.W.

    1996-04-01

    Improved reliability and electronic performance can be achieved in a system operated at cryogenic temperatures because of the reduction in mechanical insult and in disruptive effects of thermal energy on electronic devices. Continuing discoveries of new superconductors with ever increasing values of T{sub c} above that of liquid nitrogen temperature (LNT) have provided incentive for developing semiconductor electronic systems that may also operate in the superconductor`s liquid nitrogen bath. Because of the interest in high-temperature superconductor (HTS) devices, liquid nitrogen is the cryogen of choice and LNT is the temperature on which this review is focused. The purpose of this survey is to locate and assemble published information comparing the room temperature (298 K), performance of commercially available conventional and hybrid semiconductor device with their performance at LNT (77K), to help establish their candidacy as cryogenic electronic devices specifically for use at LNT. The approach to gathering information for this survey included the following activities. Periodicals and proceedings were searched for information on the behavior of semiconductor devices at LNT. Telephone calls were made to representatives of semiconductor industries, to semiconductor subcontractors, to university faculty members prominent for their research in the area of cryogenic semiconductors, and to representatives of the National Aeronautics and Space Administration (NASA) and NASA subcontractors. The sources and contacts are listed with their responses in the introduction, and a list of references appears at the end of the survey.

  7. 21 CFR 866.2580 - Gas-generating device.

    Science.gov (United States)

    2010-04-01

    ...) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices § 866.2580 Gas-generating device. (a) Identification. A gas-generating device is a device intended for medical purposes that...

  8. Event-recording devices with identification codes

    Science.gov (United States)

    Watters, David G. (Inventor); Huestis, David L. (Inventor); Bahr, Alfred J. (Inventor); Vidmar, Robert J. (Inventor)

    2003-01-01

    A recording device allows wireless interrogation to determine its identity and its state. The state indicates whether one or more physical or chemical events have taken place. In effect, the one or more physical or chemical events are recorded by the device. The identity of the device allows it to be distinguished from a number of similar devices. The recording device may be used in an array of devices that allows wireless probing by an interrogation unit. When probed, each device tells the interrogator who it is and what state it is in. The devices allow multiple use and the interrogator may use a logical reset to determine the state of each device. The interrogator can thus easily identify particular items in an array that have reached a particular condition. The device may record the status of each device in a database to maintain a history for each.

  9. Semiconductor-based, large-area, flexible, electronic devices

    Science.gov (United States)

    Goyal, Amit

    2011-03-15

    Novel articles and methods to fabricate the same resulting in flexible, large-area, triaxially textured, single-crystal or single-crystal-like, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

  10. Electrochromic Device with Polymer Electrolyte

    Science.gov (United States)

    Solovyev, Andrey A.; Zakharov, Alexander N.; Rabotkin, Sergey V.; Kovsharov, Nikolay F.

    2016-08-01

    In this study a solid-state electrochromic device (ECD) comprised of a WO3 and Prussian blue (Fe4[Fe(CN)6]3) thin film couple with a Li+-conducting solid polymer electrolyte is discussed. WO3 was deposited on K-Glass substrate by magnetron sputtering method, while Prussian blue layer was formed on the same substrate by electrodeposition method. The parameters of the electrochromic device K-Glass/WO3/Li+-electrolyte/PB/K-Glass, such as change of transmittance, response time and stability were successfully tested using coupled optoelectrochemical methods. The device was colored or bleached by the application of +2 V or -2 V, respectively. Light modulation with transmittance variation of up to 59% and coloration efficiency of 43 cm2/C at a wavelength of 550 nm were obtained. Numerous switching of the ECD over 1200 cycles without the observation of significant degradation has been demonstrated.

  11. A TOUCH-SENSITIVE DEVICE

    DEFF Research Database (Denmark)

    2009-01-01

    propagating towards a specific point of the detector array is prevented from being incident upon the specific point of the detector array when an object contacts a touch-sensitive surface of the touch-sensitive waveguide at a corresponding specific contact point.......The present invention relates to an optical touch-sensitive device and a method of determining a position and determining a position change of an object contacting an optical touch sensitive device. In particular, the present invention relates to an optical touch pad and a method of determining...... a position and determining a position change of an object contacting an optical touch pad. A touch-sensitive device, according to the present invention may comprise a light source, a touch- sensitive waveguide, a detector array, and a first light redirecting member, wherein at least a part of the light...

  12. Silicon Nano-Photonic Devices

    DEFF Research Database (Denmark)

    Pu, Minhao

    This thesis deals with the design, fabrication and characterization of nano-photonic devices including ridge waveguide components, microring resonators, and photonic crystal components, and explore the potential for these devices in dierent applications ranging from optical communication...... is achieved with small power variation. A widely tunable microwave notch lter is also experimentally demonstrated at 40 GHz. Other application such as pulse repetition rate multiplication by using microring resonator is also presented. Photonic crystal components are studied. Two dierent types of photonic...... crystal structures are analyzed concerning index sensitivity, dispersion engineering, and slow-light coupling. Several photonic crystal devices such as index sensor, slow-light coupler, and all-optical tunable cavity are presented....

  13. Microelectroporation device for genomic screening

    Energy Technology Data Exchange (ETDEWEB)

    Perroud, Thomas D.; Renzi, Ronald F.; Negrete, Oscar; Claudnic, Mark R.

    2014-09-09

    We have developed an microelectroporation device that combines microarrays of oligonucleotides, microfluidic channels, and electroporation for cell transfection and high-throughput screening applications (e.g. RNA interference screens). Microarrays allow the deposition of thousands of different oligonucleotides in microscopic spots. Microfluidic channels and microwells enable efficient loading of cells into the device and prevent cross-contamination between different oligonucleotides spots. Electroporation allows optimal transfection of nucleic acids into cells (especially hard-to-transfect cells such as primary cells) by minimizing cell death while maximizing transfection efficiency. This invention has the advantage of a higher throughput and lower cost, while preventing cross-contamination compared to conventional screening technologies. Moreover, this device does not require bulky robotic liquid handling equipment and is inherently safer given that it is a closed system.

  14. Coherent exciton-polariton devices

    Science.gov (United States)

    Fraser, Michael D.

    2017-09-01

    The Bose-Einstein condensate of exciton-polaritons has emerged as a unique, coherent system for the study of non-equilibrium, macroscopically coherent Bose gases, while the full confinement of this coherent state to a semiconductor chip has also generated considerable interest in developing novel applications employing the polariton condensate, possibly even at room temperature. Such devices include low-threshold lasers, precision inertial sensors, and circuits based on superfluidity with ultra-fast non-linear elements. While the demonstration and development of such devices are at an early stage, rapid progress is being made. In this review, an overview of the exciton-polariton condensate system and the established and emerging material systems and fabrication techniques are presented, followed by a critical, in-depth assessment of the ability of the coherent polariton system to deliver on its promise of devices offering either new functionality and/or room-temperature operation.

  15. Fibre optic communication key devices

    CERN Document Server

    Grote, Norbert

    2017-01-01

    The book gives an in-depth description of key devices of current and next generation fibre optic communication networks. Devices treated include semiconductor lasers, optical amplifiers, modulators, wavelength filters and other passives, detectors, all-optical switches, but relevant properties of optical fibres and network aspects are included as well. The presentations include the physical principles underlying the various devices, technologies used for their realization, typical performance characteristics and limitations, but development trends towards more advanced components are also illustrated. This new edition of a successful book was expanded and updated extensively. The new edition covers among others lasers for optical communication, optical switches, hybrid integration, monolithic integration and silicon photonics. The main focus is on Indium phosphide-based structures but silicon photonics is included as well. The book covers relevant principles, state-of-the-art implementations, status of curren...

  16. Linerless label device and method

    KAUST Repository

    Binladen, Abdulkari

    2016-01-14

    This apparatus and method for applying a linerless label to an end user product includes a device with a printer for printing on a face surface of a linerless label, and a release coat applicator for applying a release coat to the face surface of the label; another device including an unwinder unit (103) to unwind a roll of printed linerless label; a belt (108); a glue applicator (102) for applying glue to the belt; a nip roller (106) for contacting and applying pressure to the face surface of the linerless label such that the glue on the belt transfers to the back surface of the linerless label; at least one slitting knife 105) positioned downstream the belt and a rewinder unit (104) positioned downstream the slitting knife; and a third device which die cuts and applies the linerless label to an end user object.

  17. Advanced Mechatronics and MEMS Devices

    CERN Document Server

    2013-01-01

    Advanced Mechatronics and MEMS Devicesdescribes state-of-the-art MEMS devices and introduces the latest technology in electrical and mechanical microsystems. The evolution of design in microfabrication, as well as emerging issues in nanomaterials, micromachining, micromanufacturing and microassembly are all discussed at length in this volume. Advanced Mechatronics also provides a reader with knowledge of MEMS sensors array, MEMS multidimensional accelerometer, artificial skin with imbedded tactile components, as well as other topics in MEMS sensors and transducers. The book also presents a number of topics in advanced robotics and an abundance of applications of MEMS in robotics, like reconfigurable modular snake robots, magnetic MEMS robots for drug delivery and flying robots with adjustable wings, to name a few. This book also: Covers the fundamentals of advanced mechatronics and MEMS devices while also presenting new state-of-the-art methodology and technology used in the application of these devices Prese...

  18. Digital Devices and Distracted Doctoring.

    Science.gov (United States)

    Dossey, Garry

    2015-04-01

    During the past twenty years a digital sea change has affected our world. Digital devices have changed the way we live and especially the way we work in our professions. As dentists, we are able to work with far greater accuracy and precision than ever before; we would be foolish not to embrace these advances. But, as is often the case with rapid cultural changes, we need to be aware of the possibility of unintended consequences that may accompany this revolution. Sound scientific studies are beginning to warn of the psychological and physiological problems of overuse of digital devices in our daily lives. We should remember that these devices are neutral. It is up to each of us to use them in ways that enhance patient care.

  19. User Experience of Mobile Devices

    DEFF Research Database (Denmark)

    Raptis, Dimitrios

    , and it continues with related work on usability, coolness and previous studies that investigated their relation to physical form. It then presents a research classification that guided my research work, where the papers are placed in relation to their research purpose: exploration and validation. Explorative......This thesis focuses on mobile devices and it specifically investigates the effect of their physical form on two perceived user experience qualities, usability and coolness. With the term mobile devices, I refer to interactive products that users interact with while being on the move......, and with the term physical form I refer to the physical elements that constitute a mobile device as a whole, such as weight, size and materials. The selected research area was addressed through two research questions, one focusing on effects of physical form on usability and the other on effects on coolness...

  20. Pediatric Enteral Access Device Management.

    Science.gov (United States)

    Abdelhadi, Ruba A; Rahe, Katina; Lyman, Beth

    2016-10-13

    Enteral nutrition (EN) support has proven to be a nutrition intervention that can provide full or partial calories to promote growth and development in infants and children. To supply these nutrients, an enteral access device is required, and the use of these devices is growing. Placement of the proper device for the patient need, along with appropriate care and monitoring, is required for individualized patient management. When complications arise, early identification and management can prevent more serious morbidity. Complication management requires a tiered approach starting with staff nurses and ending with a physician expert. In addition to this, each institution needs to have an approach that is coordinated among disciplines and departments to promote consistency of practice. The formation of an enteral access team is a conduit for clinical experts to provide education to families, patients, and healthcare professionals while serving as a platform to address product and practice issues. © 2016 American Society for Parenteral and Enteral Nutrition.