WorldWideScience

Sample records for developing ipm components

  1. Prototype and Metrics for Data Processing Chain Components of IPM

    Science.gov (United States)

    Ly, Vuong

    2014-01-01

    This presentation lays out the evolution of the Intelligent Payload Module (IPM) vision given that the HyspIRI mission has been delayed. It shows that there has been a focus on airborne vehcile and unmanned aerial systems to further develop the IPM functionality. This of course does not preclude use of the IPM for space missions but provides alternate paths to continue the concept of improved onboard processing for low latency users of science data products.

  2. Resonant inverter supplied Interior Permanent Magnet (IPM) motor ...

    African Journals Online (AJOL)

    In this paper, rotor position in relation to the resonant frequency component current in the stator winding of DC-voltage link resonant inverter supplied Interior Permanent Magnet (IPM) motor has been developed. Six reference frames are used to relate the rotor position angle to the resonant frequency component current ...

  3. School IPM Recognition and Certification

    Science.gov (United States)

    Schools and school districts can get support and recognition for implementation of school IPM. EPA is developing a program to provide recognition for school districts that are working towards or have achieved a level of success with school IPM programs.

  4. School Integrated Pest Management (IPM) Grants

    Science.gov (United States)

    EPA's IPM in schools grant program supports projects that include research, development, monitoring, public education, training, demonstrations, or studies to support recipients’ efforts to increase IPM adoption by public and tribal schools (K-12).

  5. Integrated Pest Management (IPM)

    Science.gov (United States)

    Repellents Rodenticides Other types of pesticides Disponible en español Integrated Pest Management (IPM) IPM Company: IPM is the Key - Oregon State University Extension Service Last updated May 11, 2018 Related Insecticides Natural and Biological Pesticides Repellents Rodenticides Other types of pesticides Disponible en

  6. Developing Cotton IPM by Conserving Parasitoids and Predators of The Main Pest

    Directory of Open Access Journals (Sweden)

    Nurindah Nurindah

    2015-09-01

    Full Text Available On early development of intensive cotton program, insect pests were considered as an important aspect in cotton cultivation, so that it needed to be scheduled sprays. The frequency of sprays was 7 times used 12L of chemical insecticides per hectare per season. Development of cotton IPM was emphasized on non-chemical control methods through optimally utilize natural enemies of the cotton main pests (Amrasca biguttulla (IshidaHelicoverpa armigera (Hübner. Conservation of parasitoids and predators by providing the environment that support their population development is an act of supporting the natural enemies as an effective biotic mortality factor of the insect pests. The conservation could be done by improving the plant matter and cultivation techniques that include the use of resistant variety to leafhopper, intercropping cotton with secondary food plants, mulch utilization, using action threshold that considered the presence of natural enemies, and application of botanical insecticides, if needed. Conservation of parasitoids and predators in cotton IPM could control the insect pests without any insecticide spray in obtaining the production of cotton seed. As such, the use of IPM method would increase farmers’ income.

  7. PENGARUH KEMISKINAN, PERTUMBUHAN EKONOMI, DAN BELANJA MODAL TERHADAP IPM JAWA TENGAH

    Directory of Open Access Journals (Sweden)

    Denni Sulistio Mirza

    2015-12-01

    Full Text Available The purpose of this study is to know the influences of poverty, economic growth and capital expenditures to the Human Development Index (HDI in Central Java. The result of Panel data regression indicates that poverty significantly and negative related to IPM. The economic growth has positive and significant impact on IPM. Next, the capital expenditures have a positive and significant effect on the HDI. It is recommended that the planning policy of government does not only view the achievement of economic growth but also the target of human development. It is because economic growth has not been able enough to improve the quality of human resources, especially in the aspects of education, health and income.Tujuan dari penelitian ini adalah mengetahui seberapa besar pengaruh kemiskinan, pertumbuhan ekonomi dan belanja modal terhadap Indeks Pembangunan Manusia (IPM di Jawa Tengah. Hasil regresi data panel menunjukkan bahwa kemiskinan berpengaruh negatif dan signifikan terhadap IPM. Pertumbuhan ekonomi berpengaruh positif dan signifikan terhadap IPM dan belanja modal berpengaruh positif dan signifikan terhadap IPM. Disarankan agar dalam merencanakan kebijakan pemerintah tidak hanya melihat dari pencapaian target peningkatan pertumbuhan ekonomi saja namun juga target peningkatan pembangunan manusia karena pertumbuhan ekonomi sendiri belum memadai untuk meningkatkan kualitas sumber daya manusia terutama pada aspek pendidikan, kesehatan dan pendapatan masyarakat.

  8. IPM Pipe

    Science.gov (United States)

    Submit A Report View Reports List [+] View Reports Map [+] CDM Alert System Sign Up For Alerts User Login Annual Epidemic Histories Annual Season Summaries Contact Us ipmPIPE User Login Web Administrator Login

  9. How agro-ecological research helps to address food security issues under new IPM and pesticide reduction policies for global crop production systems.

    Science.gov (United States)

    E Birch, A Nicholas; Begg, Graham S; Squire, Geoffrey R

    2011-06-01

    Drivers behind food security and crop protection issues are discussed in relation to food losses caused by pests. Pests globally consume food estimated to feed an additional one billion people. Key drivers include rapid human population increase, climate change, loss of beneficial on-farm biodiversity, reduction in per capita cropped land, water shortages, and EU pesticide withdrawals under policies relating to 91/414 EEC. IPM (Integrated Pest Management) will be compulsory for all EU agriculture by 2014 and is also being widely adopted globally. IPM offers a 'toolbox' of complementary crop- and region-specific crop protection solutions to address these rising pressures. IPM aims for more sustainable solutions by using complementary technologies. The applied research challenge now is to reduce selection pressure on single solution strategies, by creating additive/synergistic interactions between IPM components. IPM is compatible with organic, conventional, and GM cropping systems and is flexible, allowing regional fine-tuning. It reduces pests below economic thresholds utilizing key 'ecological services', particularly biocontrol. A recent global review demonstrates that IPM can reduce pesticide use and increase yields of most of the major crops studied. Landscape scale 'ecological engineering', together with genetic improvement of new crop varieties, will enhance the durability of pest-resistant cultivars (conventional and GM). IPM will also promote compatibility with semiochemicals, biopesticides, precision pest monitoring tools, and rapid diagnostics. These combined strategies are urgently needed and are best achieved via multi-disciplinary research, including complex spatio-temporal modelling at farm and landscape scales. Integrative and synergistic use of existing and new IPM technologies will help meet future food production needs more sustainably in developed and developing countries, in an era of reduced pesticide availability. Current IPM research gaps are

  10. Incorporating biological control into IPM decision making

    Science.gov (United States)

    Of the many ways biological control can be incorporated into Integrated Pest Management (IPM) programs, natural enemy thresholds are arguably most easily adopted by stakeholders. Integration of natural enemy thresholds into IPM programs requires ecological and cost/benefit crop production data, thr...

  11. PURE progress in innovative IPM in pome fruit in Europe

    NARCIS (Netherlands)

    Heijne, B.; Helsen, H.H.M.; Caffi, T.; Köhl, J.; Riemens, M.M.; Simon, S.; Buurma, J.S.; Hennen, W.H.G.J.

    2015-01-01

    Research on innovative Integrated Pest Management (IPM) tools is done onstation and on-farm in the PURE project. The idea is that IPM tools are tested under well-defined conditions in experimental orchards. Subsequently, they are tested in commercial orchards as part of a total IPM system where

  12. Social impacts of IPM-FFS on urban and peri-urban vegetable ...

    African Journals Online (AJOL)

    social relations, social empowerment and sharing of IPM information, and sustainability and institutionalization of IPM) for vegetable producers in an integrated pest management (IPM) project using farmer field schools (FFS) in Cotonou.

  13. Studies on IPM policy in SE Asia : two centuries of plant protection in Indonesia, Malaysia and Thailand

    NARCIS (Netherlands)

    Oudejans, J.H.M.

    1999-01-01

    Integrated Pest Management (IPM) became a widely supported approach in the control of pests and diseases in crops. This study describes IPM policy and implementation, a.o. by the FAO Inter-Country Programme for the Development and Application of IPM in Rice in S and SE Asia in Indonesia,

  14. Iron Pole Shape Optimization of IPM Motors Using an Integrated Method

    Directory of Open Access Journals (Sweden)

    JABBARI, A.

    2010-02-01

    Full Text Available An iron pole shape optimization method to reduce cogging torque in Interior Permanent Magnet (IPM motors is developed by using the reduced basis technique coupled by finite element and design of experiments methods. Objective function is defined as the minimum cogging torque. The experimental design of Taguchi method is used to build the approximation model and to perform optimization. This method is demonstrated on the rotor pole shape optimization of a 4-poles/24-slots IPM motor.

  15. Extracellular matrix components expression in human pluripotent stem cell-derived retinal organoids recapitulates retinogenesis in vivo and reveals an important role for IMPG1 and CD44 in the development of photoreceptors and interphotoreceptor matrix.

    Science.gov (United States)

    Felemban, Majed; Dorgau, Birthe; Hunt, Nicola Claire; Hallam, Dean; Zerti, Darin; Bauer, Roman; Ding, Yuchun; Collin, Joseph; Steel, David; Krasnogor, Natalio; Al-Aama, Jumana; Lindsay, Susan; Mellough, Carla; Lako, Majlinda

    2018-05-17

    The extracellular matrix (ECM) plays an important role in numerous processes including cellular proliferation, differentiation, migration, maturation, adhesion guidance and axonal growth. To date, there has been no detailed analysis of the ECM distribution during retinal ontogenesis in humans and the functional importance of many ECM components is poorly understood. In this study, the expression of key ECM components in adult mouse and monkey retina, developing and adult human retina and retinal organoids derived from human pluripotent stem cells was studied. Our data indicate that basement membrane ECMs (Fibronectin and Collagen IV) were expressed in Bruch's membrane and the inner limiting membrane of the developing human retina, whilst the hyalectins (Versican and Brevican), cluster of differentiation 44 (CD44), photoreceptor-specific ECMs Interphotoreceptor Matrix Proteoglycan 1 (IMPG1) and Interphotoreceptor Matrix Proteoglycan 2 (IMPG2) were detected in the developing interphotoreceptor matrix (IPM). The expression of IMPG1, Versican and Brevican in the developing IPM was conserved between human developing retina and human pluripotent stem cell-derived retinal organoids. Blocking the action of CD44 and IMPG1 in pluripotent stem cell derived retinal organoids affected the development of photoreceptors, their inner/outer segments and connecting cilia and disrupted IPM formation, with IMPG1 having an earlier and more significant impact. Together, our data suggest an important role for IMPG1 and CD44 in the development of photoreceptors and IPM formation during human retinogenesis. The expression and the role of many extracellular matrix (ECM) components during human retinal development is not fully understood. In this study, expression of key ECM components (Collagen IV, Fibronectin, Brevican, Versican, IMPG1 and IMPG2) was investigated during human retinal ontogenesis. Collagen IV and Fibronectin were expressed in Bruch's membrane; whereas Brevican, Versican

  16. A survey of California public school districts' ant and weed management practices and a review of their use of IPM.

    Science.gov (United States)

    Barnes, Carole; Sutherland, Sandra; Brattesani, Madeline; Wilhoit, Larry; Messenger, Belinda

    2012-04-01

    The U.S. Environmental Protection Agency encourages school officials to adopt integrated pest management (IPM) to reduce children's exposure to potentially harmful pesticides. In California, the Healthy Schools Act of 2000 (HSA) establishes right-to-know requirements for pesticide use in public schools; requires school districts to designate an IPM coordinator; and requires the California Department of Pesticide Regulation (DPR) to collect pesticide-use information from pest control businesses, conduct IPM training workshops, and promote least-toxic pest management practices. DPR periodically surveys school districts statewide to measure compliance with the HSA and the use of least-toxic management practices compatible with IPM and to guide DPR's training and outreach efforts. Results from three surveys, conducted in 2001, 2002, and 2004, show that an increasing number of districts use ant management practices compatible with IPM; however, fewer districts use IPM-compatible weed management practices. DPR's California School IPM program plans to develop technical materials and to conduct training workshops that will provide districts with more information about how to use an IPM program to prevent and manage weeds.

  17. Building Blocks for School IPM: A Least-Toxic Pest Management Manual.

    Science.gov (United States)

    Crouse, Becky, Ed.; Owens, Kagan, Ed.

    This publication is a compilation of original and republished materials from numerous individuals and organizations working on pesticide reform and integrated pest management (IPM)--using alternatives to prevailing chemical-intensive practices. The manual provides comprehensive information on implementing school IPM, including a practical guide to…

  18. Insect pests in asparagus; IPM perspectives!

    NARCIS (Netherlands)

    Rozen, van K.; Huiting, H.F.

    2016-01-01

    Resulting from Directive 2009/128/EC, all EU Member States have to comply with stricter guidelines regarding Integrated Pest Management before 2023. As implementation of IPM measures and strategies has a high perceived risk, demonstration of and discussion on possibilities may be a key element in

  19. Low-input, low-cost IPM program helps manage potato psyllid

    Directory of Open Access Journals (Sweden)

    Sean M. Prager

    2016-04-01

    Full Text Available Potato psyllid is a pest of solanaceous plants throughout much of the western United States, including California, where it has increased and is now overwintering. The psyllid affects its plant hosts from direct feeding and by transmitting a plant pathogenic bacterium, Lso. Millions of dollars of damages have occurred in the U.S. potato industry, and a large acreage of crops is susceptible in California. Control is complicated because different crops have different pest complexes and susceptibilities to Lso; currently most growers use multiple pesticide applications, including broad-spectrum insecticides. Results of our field trials at South Coast Research and Extension Center indicate that the use of broad-spectrum insecticides actually increases psyllid numbers in both peppers and potatoes. We have developed a low-input IPM program, which in field trials produced encouraging results in peppers, potatoes and tomatoes compared to broad-spectrum insecticides. Economic analysis showed the low-input IPM approach was more cost effective than a standard insecticide program in tomatoes.

  20. Pesticide residue analysis of soil, water, and grain of IPM basmati rice.

    Science.gov (United States)

    Arora, Sumitra; Mukherji, Irani; Kumar, Aman; Tanwar, R K

    2014-12-01

    The main aim of the present investigations was to compare the pesticide load in integrated pest management (IPM) with non-IPM crops of rice fields. The harvest samples of Basmati rice grain, soil, and irrigation water, from IPM and non-IPM field trials, at villages in northern India, were analyzed using multi-pesticide residue method. The field experiments were conducted for three consecutive years (2008-2011) for the successful validation of the modules, synthesized for Basmati rice, at these locations. Residues of tricyclazole, propiconazole, hexconazole, lambda cyhalothrin, pretilachlor chlorpyrifos, DDVP, carbendazim, and imidacloprid were analyzed from two locations, Dudhli village of Dehradun, Uttrakhand and Saboli and Aterna village of Sonepat, Haryana. The pesticide residues were observed below detectable limit (BDL) (water samples (2008-09). Residues of tricyclazole and carbendazim, analyzed from same locations, revealed pesticide residues as BDL (water samples (2009-2010). The residues of tricyclazole, propioconazole, chlorpyrifos, hexaconazole, pretilachlor, and λ-cyhalothrin were also found as BDL (water samples (<0.001-0.05 μg/L) (2010-2011).

  1. Optimalisasi Pendidikan Anak Usia Dini (PAUD Guna Meningkatkan Indeks Pembangunan Manusia (IPM di Jawa Barat

    Directory of Open Access Journals (Sweden)

    Ihsana Sabriani Borualogo

    2006-09-01

    Untuk itu, pemerintah daerah dapat menjalin kerjasama kemitraan dengan perguruan tinggi untuk dapat melakukan upaya optimalisasi PAUD guna meningkatkan IPM di Jawa Barat. Dengan kerjasama kemitraan ini diharapkan dapat membantu meningkatkan indeks rata-rata lama sekolah dan indeks melek huruf, sehingga IPM di Jawa Barat akan meningkat.

  2. Writing an IPM Policy for Your School District Webinar Report

    Science.gov (United States)

    Included here is information on the presenters, webinar statistics, responses to questions and comments from webinars hosted by EPA’s Center of Expertise for School IPM, presented on November 10, 2015.

  3. Design and Optimization of IPM Motor Considering Flux Weakening Capability and Vibration for Electric Vehicle Applications

    Directory of Open Access Journals (Sweden)

    Fangwu Ma

    2018-05-01

    Full Text Available As motor design is key to the development of electric vehicles (EVs and hybrid EVs (HEVs, it has recently become the subject of considerable interest. Interior permanent magnet (IPM motors offer advantages such as high torque density and high efficiency, benefiting from both permanent magnet (PM torque and reluctance torque. However an obvious disadvantage of IPM motors is that operation at high speed involves difficulties in achieving the required flux-weakening capability and low vibration. This study focuses on optimizing the flux-weakening performance and reducing the vibration of an IPM motor for EVs. Firstly, flux-weakening capability, cogging torque, torque ripple, and radical vibration force are analyzed based on the mathematical model. Secondly, three kinds of motors are optimized by the genetic algorithm and analyzed, providing visible insights into the contribution of different rotor structures to the torque characteristics, efficiency, and extended speed range. Thirdly, a slotted rotor configuration is proposed to reduce the torque ripple and radical vibration force. The flux density distributions are discussed, explaining the principle that motors with slotted rotors and stator skew slots have smaller torque ripple and radical vibration force. Lastly, the design and optimization results have been validated against experiments.

  4. Environment polluting conventional chemical control compared to an environmentally friendly IPM approach for control of diamondback moth, Plutella xylostella (L.), in China: a review.

    Science.gov (United States)

    Shakeel, Muhammad; Farooq, Muhammad; Nasim, Wajid; Akram, Waseem; Khan, Fawad Zafar Ahmad; Jaleel, Waqar; Zhu, Xun; Yin, Haichen; Li, Shuzhong; Fahad, Shah; Hussain, Saddam; Chauhan, Bhagirath Singh; Jin, Fengliang

    2017-06-01

    The diamondback moth, Plutella xylostella, is recognized as a widely distributed destructive insect pest of Brassica worldwide. The management of this pest is a serious issue, and an estimated annual cost of its management has reached approximately US$4 billion. Despite the fact that chemicals are a serious threat to the environment, lots of chemicals are applied for controlling various insect pests especially P. xylostella. An overreliance on chemical control has not only led to the evolution of resistance to insecticides and to a reduction of natural enemies but also has polluted various components of water, air, and soil ecosystem. In the present scenario, there is a need to implement an environmentally friendly integrated pest management (IPM) approach with new management tactics (microbial control, biological control, cultural control, mating disruption, insecticide rotation strategies, and plant resistance) for an alternative to chemical control. The IPM approach is not only economically beneficial but also reduces the environmental and health risks. The present review synthesizes published information on the insecticide resistance against P. xylostella and emphasizes on adopting an alternative environmentally friendly IPM approach for controlling P. xylostella in China.

  5. PREMISE Insect Model: Integrated Population Dynamics Model for the Ex-ante Evaluation of IPM against Insect Pest

    NARCIS (Netherlands)

    Hennen, Wil; Alaphilippe, Aude

    2015-01-01

    Codling moth Cydia pomonella L. is the most serious pest of apple and pear worldwide and causes damage and decreased
    yields. To minimize this risk, IPM tools can be applied to reduce the use of chemicals. A cost-effective application of IPM depends
    on the number of insects at the time of

  6. Effect of Participatory Research on Farmers' Knowledge and Practice of IPM: The Case of Cotton in Benin

    Science.gov (United States)

    Togbé, Codjo Euloge; Haagsma, Rein; Aoudji, Augustin K. N.; Vodouhê, Simplice D.

    2015-01-01

    Purpose: This study assesses the effect of participatory research on farmers' knowledge and practice of Integrated Pest Management (IPM) in Benin. The participatory field experiments were carried out during the 2011-2012 cotton growing season, and focused on the development and application of pest management knowledge. Methodology: A…

  7. A Comparison of Two Objective Measures of Binaural Processing: The Interaural Phase Modulation Following Response and the Binaural Interaction Component.

    Science.gov (United States)

    Haywood, Nicholas R; Undurraga, Jaime A; Marquardt, Torsten; McAlpine, David

    2015-12-30

    There has been continued interest in clinical objective measures of binaural processing. One commonly proposed measure is the binaural interaction component (BIC), which is obtained typically by recording auditory brainstem responses (ABRs)-the BIC reflects the difference between the binaural ABR and the sum of the monaural ABRs (i.e., binaural - (left + right)). We have recently developed an alternative, direct measure of sensitivity to interaural time differences, namely, a following response to modulations in interaural phase difference (the interaural phase modulation following response; IPM-FR). To obtain this measure, an ongoing diotically amplitude-modulated signal is presented, and the interaural phase difference of the carrier is switched periodically at minima in the modulation cycle. Such periodic modulations to interaural phase difference can evoke a steady state following response. BIC and IPM-FR measurements were compared from 10 normal-hearing subjects using a 16-channel electroencephalographic system. Both ABRs and IPM-FRs were observed most clearly from similar electrode locations-differential recordings taken from electrodes near the ear (e.g., mastoid) in reference to a vertex electrode (Cz). Although all subjects displayed clear ABRs, the BIC was not reliably observed. In contrast, the IPM-FR typically elicited a robust and significant response. In addition, the IPM-FR measure required a considerably shorter recording session. As the IPM-FR magnitude varied with interaural phase difference modulation depth, it could potentially serve as a correlate of perceptual salience. Overall, the IPM-FR appears a more suitable clinical measure than the BIC. © The Author(s) 2015.

  8. Transgenic plants as vital components of integrated pest management

    NARCIS (Netherlands)

    Kos, Martine; van Loon, J.J.A.; Dicke, M.; Vet, L.E.M.

    2009-01-01

    Although integrated pest management (IPM) strategies have been developed worldwide, further improvement of IPM effectiveness is required. The use of transgenic technology to create insect-resistant plants can offer a solution to the limited availability of highly insect-resistant cultivars.

  9. Exposure assessment of traditional and IPM farmers on using pesticides: A case study at Bang Rieng Sub District, Khuan Nieng District, Songkhla Province

    Directory of Open Access Journals (Sweden)

    Viris Jirachaiyabhas

    2004-02-01

    Full Text Available A questionnaire was developed to quantitatively evaluate the exposure to pesticides and to gauge the concentration of organophosphate pesticides such as chlorpyrifos and methyl-parathion while the farmers of Bang Rieng were spraying these pesticides. The results were applied to the exposure assessment and to compare the quantity of exposure to these pesticides between 33 traditional and 40 integrated pest management (IPM farmers of Bang Rieng. There was a significant difference in the level of exposure between the traditional farmers, who had the average pesticide exposure scores of 58.30 points and the IPM farmers, whose average scores were 53.50 points, (p < 0.015. Concentrations of organophosphate pesticides chlorpyrifos and methyl-parathion were measured. Thirty-three air samples were collected by personal sampling during the period of pesticide spraying. Traditional farmers were exposed to higher levels of the pesticide(s with a mean concentration of 0.1865 mg/m compared to the IPM farmers who were exposed to a mean pesticide concentration of 0.037 mg/m3. It was estimated that the farmers of Bang Rieng would be exposed to 186-19,616.6 mg of the organophosphatepesticide(s via inhalation throughout their lifetime (65 years. Moreover, according to the exposure assessment, the traditional farmers exposed to a greater amount of the pesticide(s via inhalation compared to the IPM farmers.

  10. Farmers’ Technical Knowledge about Integrated Pest Management (IPM in Olive Production

    Directory of Open Access Journals (Sweden)

    Mohammad S. Allahyari

    2017-12-01

    Full Text Available While Integrated Pest Management (IPM is a sustainable approach of pest control, contributing to reduced use of pesticides and risks on human health and the environment, farmers have shown limited interest in practicing this method. The present study explored the levels of technical knowledge about integrated management of the olive fly (Bactrocera oleae among olive growers in Roudbar County of Iran and factors underpinning olive farmers’ technical knowledge of integrated management. Data were collected in a survey of olive farmers, on the basis of a structured questionnaire. Almost half of the farmers (48.4% had good to excellent levels of technical knowledge of integrated management, while almost a third of the farmers (35.4% had a moderate knowledge level. However, a noticeable portion of the farmers (15.9% had poor knowledge of integrated management. Moreover, most farmers showed average knowledge of the adverse effects of pesticides on human health. While most farmers showed good levels of social participation, cooperation with institutes, and participation in extension activities, they showed low levels of community involvement (involvement in a group of people that have and share common interests with each other. Olive imports and the lack of a common action for olive fly control were perceived as the main barriers of IPM adoption among most farmers. Regression analysis revealed that increased community involvement, large area under olive farming, participation in education activities, and high farming experience promoted farmers’ technical knowledge of integrated olive fly control. Strengthening growers’ technical knowledge of IPM through community involvement and extension services among inexperienced small-scale olive farmers is recommended for reducing possible unnecessary insecticide sprays in olive production.

  11. Investigation of e-Linac tube construction method and implementation suitable method for IPM e-Linac

    Directory of Open Access Journals (Sweden)

    F ghasemi

    2015-09-01

    Full Text Available The goal of electron linear accelerator project in institute for research in fundamental sciences(IPM is to build its components as many as they can in Iran. This accelerator is a traveling wave type. Investigations show that there are various techniques in forming and connecting the accelerating tube cavities. The shrinking method applied for constructing the accelerating tube is selected based on the one applied for Stanford University’s Mark III accelerator. With success in building an 8-cavity test tube and finding the problems of the method, the construction of the final accelerating tube with 24 cavities has been accomplished. The results show that the obtained frequency of 2996.5 MHz and quality factor of 11200, satisfy the design desired values.

  12. IPM Standards for Schools: A Program for Reducing Pest and Pesticide Risks in Schools and Other Sensitive Environments. Version 2.0.

    Science.gov (United States)

    Green, Thomas A., Ed.

    This guide presents Integrated Pest Management (IPM) practice standards for educational facilities to help schools become certified in providing effective and safe pest control. The guide is divided into two parts with three modules each for both buildings and grounds. The first module addresses building the IPM foundation to meet all legal…

  13. Optimal design of an IPM motor using Taguchi and Rosenbrock's methods

    International Nuclear Information System (INIS)

    Hwang, C C; Li, P L; Chang, C M; Liu, C T

    2011-01-01

    Techniques for the design optimization for cogging torque minimization and average torque maximization of a high-speed 2-pole interior permanent magnet (IPM) synchronous motor are presented. It is shown by the finite element method (FEM) and measurement, that combined the Taguchi and Rosenbrock's methods is a very efficient and effective approach in robust design a high performance motor.

  14. The IPM Wheat Model--results of a three-year study in North Rhine-Westphalia, Lower Saxony and Schleswig-Holstein.

    Science.gov (United States)

    Verreet, J A; Heger, M; Oerke, E; Dehne, H W; Finger, I; Busse, C; Klink, H

    2003-01-01

    Under the primary utilisation of phytosanitary production factors such as selection of variety, crop rotation and N fertilisation according to plant requirements, the IPM Wheat Model comprises the elements diagnosis (qualitative = type of pathogen, quantitative = disease severity), scientifically grounded treatment thresholds which, as critical values in pathogen development, can be applied to define the optimum time of fungicide application, and pathogen-specific effective fungicides and application amounts. This leads to the location and year-specific optimised control of the pathogen and of the associated yield performance. After several years of development in Bavaria (from 1985 on) and Schleswig-Holstein (1993-1999), the model was tested as part of a project involving the Universities of Bonn and Kiel and the plant protection services of the German states of Lower Saxony, North Rhine-Westphalia and Schleswig-Holstein in a three-year study (1999-2001) in interregional locations (usually nine per state) with the winter wheat variety Ritmo (interregional indicator variety) and a further variety of regional importance in different variations (untreated control, three to four times growth stage-oriented variants for the determination of the absolute damage potential, IPM-variant). In exact records (approx. 12 dates per vegetation period), the disease epidemics were recorded weekly. With the genetically uniform indicator variety Ritmo, the results documented substantially differing year- and location-specific disease and yield patterns. Interregionally, a broad wheat pathogen spectrum (Puccinia striiformis, P. recondita, Septoria tritici, Stagonospora (syn. Septoria) nodorum, Blumeria (syn. Erysiphe) graminis, Pseudocercosporella herpotrichoides, Drechslera tritici-repentis) in differing composition, disease severity and damage effect was demonstrated. The heterogeneity of the infection and damage patterns was increased in the case of the second variety, in

  15. A Fundamental Step in IPM on Grapevine: Evaluating the Side Effects of Pesticides on Predatory Mites

    Directory of Open Access Journals (Sweden)

    Alberto Pozzebon

    2015-10-01

    Full Text Available Knowledge on side effects of pesticides on non-target beneficial arthropods is a key point in Integrated Pest Management (IPM. Here we present the results of four experiments conducted in vineyards where the effects of chlorpyrifos, thiamethoxam, indoxacarb, flufenoxuron, and tebufenozide were evaluated on the generalist predatory mites Typhlodromus pyri Scheuten and Amblyseius andersoni (Chant, key biocontrol agents of herbivorous mites on grapevines. Results show that indoxacarb and tebufenozide had a low impact on the predatory mites considered here, while a significant impact was observed for chlorpyrifos, flufenoxuron, and thiamethoxam. The information obtained here should be considered in the design of IPM strategies on grapevine.

  16. Considerations in developing an integrated pest management programme for control of sea lice on farmed salmon in Pacific Canada.

    Science.gov (United States)

    Brooks, K M

    2009-01-01

    In the development of integrated pest management (IPM) plans for the control of sea lice there are some components that are common to many areas. However, effective plans must be tailored to regionally varying environmental and biological factors affecting the severity of sea lice infections. This paper describes factors that would be involved in the development of an IPM plan for sea lice in the Broughton Archipelago, British Columbia. Temperature, salinity and currents affect the production, dispersion and competence of larvae of sea lice, Lepeophtheirus salmonis (Krøyer), as they develop to the infective copepodid stage. This information can be coupled with oceanographic conditions in the Broughton Archipelago and emerging computer models to define zones of infection where infections of new hosts are most likely. Salinity and temperature depend, in part, on river discharge in estuarine systems. River discharge depends on precipitation, snow pack and ambient temperatures, which can be monitored to help forecast the intensity of sea lice infections associated with both farmed and wild hosts. One of the goals of IPM planning is to reduce reliance on pesticides to avoid development of resistance in targeted parasites and to minimize environmental residues. Recommendations for developing an IPM plan specific to the Broughton Archipelago are provided along with a discussion of the additional information needed to refine IPM plans in this and other areas.

  17. EUCLID: Leveraging IPM for sustainable production of fruit and vegetable crops in partnership with China

    OpenAIRE

    Nicot , Philippe C.; Bardin , Marc; Leyronas , Christel; Desneux , Nicolas

    2016-01-01

    EUCLID: Leveraging IPM for sustainable production of fruit and vegetable crops in partnership with China. 13. IOBC-WPRS Meeting of the working group "Biological control of fungal and bacterial plant pathogens. .

  18. IPM Use With the Deployment of a Non-High Dose Bt Pyramid and Mitigation of Resistance for Western Corn Rootworm (Diabrotica virgifera virgifera).

    Science.gov (United States)

    Martinez, J C; Caprio, M A

    2016-03-27

    Recent detection of western corn rootworm resistance to Bt (Bacillus thuringiensis) corn prompted recommendations for the use of integrated pest management (IPM) with planting refuges to prolong the durability of Bt technologies. We conducted a simulation experiment exploring the effectiveness of various IPM tools at extending durability of pyramided Bt traits. Results indicate that some IPM practices have greater merits than others. Crop rotation was the most effective strategy, followed by increasing the non-Bt refuge size from 5 to 20%. Soil-applied insecticide use for Bt corn did not increase the durability compared with planting Bt with refuges alone, and both projected lower durabilities. When IPM participation with randomly selected management tools was increased at the time of Bt commercialization, durability of pyramided traits increased as well. When non-corn rootworm expressing corn was incorporated as an IPM option, the durability further increased.For corn rootworm, a local resistance phenomenon appeared immediately surrounding the resistant field (hotspot) and spread throughout the local neighborhood in six generations in absence of mitigation. Hotspot mitigation with random selection of strategies was ineffective at slowing resistance, unless crop rotation occurred immediately; regional mitigation was superior to random mitigation in the hotspot and reduced observed resistance allele frequencies in the neighborhood. As resistance alleles of mobile pests can escape hotspots, the scope of mitigation should extend beyond resistant sites. In the case of widespread resistance, regional mitigation was less effective at prolonging the life of the pyramid than IPM with Bt deployment at the time of commercialization. Published by Oxford University Press on behalf of Entomological Society of America 2016. This work is written by US Government employees and is in the public domain in the United States.

  19. Selectivity lists of pesticides to beneficial arthropods for IPM programs in carrot--first results.

    Science.gov (United States)

    Hautier, L; Jansen, J-P; Mabon, N; Schiffers, B

    2005-01-01

    In order to improve IPM programs in carrot, 7 fungicides, 12 herbicides and 9 insecticides commonly used in Belgium were tested for their toxicity towards five beneficial arthropods representative of most important natural enemies encountered in carrot: parasitic wasps - Aphidius rhopalosiphi (De Stefani-Perez) (Hym., Aphidiidae), ladybirds - Adalia bipunctata (L.) (Col., Coccinellidae), hoverfly - Episyrphus balteatus (Dipt.. Syrphidae), rove beetle - Aleochara bilineata (Col., Staphylinidae) and carabid beetle - Bembidion lampros (Col., Carabidae). Initialy, all plant protection products were tested on inert substrate glass plates or sand according to the insect. Products with a corrected mortality (CM) or a parasitism reduction (PR) lower than 30% were kept for the constitution of positive list (green list). The other compounds were further tested on plant for A. rhopalosiphi, A. bipunctata, E. balteatus and soil for B. lampros and A. bilineata. With these extended laboratory tests results, products were listed in toxicity class: green category [CM or PR harmless to beneficials except Tebuconazole, which was slightly harmful for A. bipunctata. Herbicides were also harmless for soil beneficials, except Chlorpropham. This product was very toxic on sand towards A. bilineata and must be tested on soil. All soil insecticides tested were very toxic for ground beneficials and considered as non-selective. Their use in IPM is subject to questioning in view of negative impacts on beneficials. Among foliar insecticides, Dimethoate and Deltamethrin are not recommended for IPM because their high toxicity for all beneficials. The other foliar insecticides were more selective; any of them were harmless for all species tested.

  20. “These called left intellectuals”: the IPM of PCB and the communist phenomenon in cultural production in post-coup

    Directory of Open Access Journals (Sweden)

    Rodrigo Czajka

    2015-08-01

    Full Text Available Among the many investigative actions taken by the military with the intention of collecting information about the "communist subversion" in the post-coup in 1964, one of the forms that really stood out was the Police-Military Investigation (IPM. This research instrument was designed to collect proof and evidence which subsequently formed the basis for criminal proceedings based on the National Security Law (LSN. Among the IPMs that gained greater impact was the Brazilian Communist Party (PCB, mainly because it was the starting point for other surveys that have unfolded in specific investigations. One of them, which is discussed in this article concerns the organization of a left intellectuality that if before the coup ground a debate on the political and social thought in Brazil, after the coup will gain even greater projection for his performance in resistance to the regime military. In the IPM of PCB the "intellectual left" or "communist intellectual" are defined by the military reports as having elements of a sophisticated speech of Soviet propaganda, then, should be thoroughly investigated by intelligence services.

  1. Pre and post harvest IPM for the mango fruit fly, Bactrocera dorsalis (Hendel)

    International Nuclear Information System (INIS)

    Verghese, Abraham; Sreedevi, K.; Nagaraju, D.K.

    2006-01-01

    The fruit fly, Bactrocera dorsalis (Hendel) is a major pest of mango in India. So, investigations were carried out to standardize an Integrated Pest Management (IPM) for fruit fly-free and residue-free mango fruits. The study required orchard and laboratory studies, which were conducted on the commercial variety Banganapalli, at the Indian Institute of Horticultural Research, Hessaraghatta Lake P.O., Bangalore, India, during 2004 and 2005. Results showed that a pre harvest IPM combination of male annihilation technique (MAT) (using methyl eugenol as a lure) + sanitation brought down B. dorsalis infestation to 5.00% from an infestation ranging from 17 to 66% in control in both years. An additional cover spray of Decamethrin 2.8EC 0.5ml/l (which is half the recommended dose) + Azadirachtin (0.03 %) 2ml/l (neem based botanical) gave 100% control in both the years. Post harvest treatments with hot water at 48 degree C for 60 and 75 min resulted in 100% control at both the time regimes in 2004 and 2005. The untreated fruits, which were also exposed to gravid females (but not treated in hot water) showed 30% and 5.5% infestations, respectively, in 2004 and 2005. (author)

  2. Pre and post harvest IPM for the mango fruit fly, Bactrocera dorsalis (Hendel)

    Energy Technology Data Exchange (ETDEWEB)

    Verghese, Abraham; Sreedevi, K.; Nagaraju, D.K., E-mail: avergis@iihr.ernet.i [Indian Institute of Horticultural Research, Bangalore, Karnataka (India)

    2006-07-01

    The fruit fly, Bactrocera dorsalis (Hendel) is a major pest of mango in India. So, investigations were carried out to standardize an Integrated Pest Management (IPM) for fruit fly-free and residue-free mango fruits. The study required orchard and laboratory studies, which were conducted on the commercial variety Banganapalli, at the Indian Institute of Horticultural Research, Hessaraghatta Lake P.O., Bangalore, India, during 2004 and 2005. Results showed that a pre harvest IPM combination of male annihilation technique (MAT) (using methyl eugenol as a lure) + sanitation brought down B. dorsalis infestation to 5.00% from an infestation ranging from 17 to 66% in control in both years. An additional cover spray of Decamethrin 2.8EC 0.5ml/l (which is half the recommended dose) + Azadirachtin (0.03 %) 2ml/l (neem based botanical) gave 100% control in both the years. Post harvest treatments with hot water at 48 degree C for 60 and 75 min resulted in 100% control at both the time regimes in 2004 and 2005. The untreated fruits, which were also exposed to gravid females (but not treated in hot water) showed 30% and 5.5% infestations, respectively, in 2004 and 2005. (author)

  3. A clinical examination of antibiotics in continuous regional arterial infusion (CRAI) therapy for severe acute pancreatitis (SAP). A prospective randomized controlled trial of BIPM and IPM/CS

    International Nuclear Information System (INIS)

    Yamasaki, Shigemichi; Ishikura, Hiroyasu; Kamitani, Takanori

    2011-01-01

    Continuous regional arterial infusion (CRAI) therapy using both protease inhibitors and antibiotics are one of the specific therapeutic methods for severe acute pancreatitis (SAP). As for the administered antibiotics, imipenem/cilastatin sodium (IPM/CS) is generally chosen as a first step, but there are only a few reports comparing IPM/CS with other antibiotics. Therefore, we performed a prospective randomized controlled trial between biapenem (BIPM) and IPM/CS as CRAI antibiotics. Twelve patients with SAP were admitted to our institution during April, 2009 since August, 2006, and were randomized into two groups. They were treated with 120 mg/day of nafamostat mesilate and either 1.2 g/day of BIPM (n=6) or 2.0 g/day of IPM/CS (n=6) for CRAI therapy within 48 hours after the administration. The clinical data, inflammatory markers (WBC, CRP), serum pancreatic enzymes (lipase, tripsin, phospholipase A2, elastase 1 and pancreatic secretory trypsin inhibitor (PSTI) and contrast-enhanced abdominal Computed Tomography findings were compared between the two groups and the adverse effects were monitored. CRAI therapy was performed for seven days. The curative effect of this therapy was evaluated at the beginning of the treatment, the day 7 and the day 14. Our results suggested that BIPM was a non-recessive antibiotic which had an equal effect in CRAI therapy in comparison with IPM/CS. (author)

  4. Component-based development process and component lifecycle

    NARCIS (Netherlands)

    Crnkovic, I.; Chaudron, M.R.V.; Larsson, S.

    2006-01-01

    The process of component- and component-based system development differs in many significant ways from the "classical" development process of software systems. The main difference is in the separation of the development process of components from the development process of systems. This fact has a

  5. Monitoring techniques of the western corn rootworm are the precursor to effective IPM strategies.

    Science.gov (United States)

    Lemic, Darija; Mikac, Katarina M; Kozina, Antonela; Benitez, Hugo A; McLean, Christopher M; Bažok, Renata

    2016-02-01

    The western corn rootworm (WCR) is economically the most important pest of maize in Croatia. To predict WCR adult population abundance and variability, traditional, genetic and morphometric monitoring of populations was conducted over time through each phase of the WCR invasion process in Croatia. Through traditional monitoring it was shown that WCR established their current population and reached economic densities after 14 years persisting in the study area. Regression-tree-based modelling showed that the best predictor of WCR adult abundance was the total amount of rainfall. Genetic monitoring indicated that genetic differentiation increased over time at the intrapopulation level, and morphometric monitoring indicated that wing morphotypes varied according to edaphic landscape changes. Traditional population metric surveys are important in WCR integrated pest management (IPM), as such surveys can be effectively used to predict population abundances. Novel-use monitoring techniques such as genetics and geometric morphometrics can be used to provide valuable information on variation within and among populations. The monitoring techniques presented herein provide sound data to assist in the understanding of both WCR ecology and population genetics and may provide more information than that currently available using traditional techniques (e.g. sticky traps), and as such these additional techniques should be written into IPM for WCR. © 2015 Society of Chemical Industry.

  6. Development of a chromosomally integrated metabolite-inducible Leu3p-alpha-IPM "off-on" gene switch.

    Directory of Open Access Journals (Sweden)

    Maria Poulou

    2010-08-01

    Full Text Available Present technology uses mostly chimeric proteins as regulators and hormones or antibiotics as signals to induce spatial and temporal gene expression.Here, we show that a chromosomally integrated yeast 'Leu3p-alpha-IotaRhoMu' system constitutes a ligand-inducible regulatory "off-on" genetic switch with an extensively dynamic action area. We find that Leu3p acts as an active transcriptional repressor in the absence and as an activator in the presence of alpha-isopropylmalate (alpha-IotaRhoMu in primary fibroblasts isolated from double transgenic mouse embryos bearing ubiquitously expressing Leu3p and a Leu3p regulated GFP reporter. In the absence of the branched amino acid biosynthetic pathway in animals, metabolically stable alpha-IPM presents an EC(50 equal to 0.8837 mM and fast "OFF-ON" kinetics (t(50ON = 43 min, t(50OFF = 2.18 h, it enters the cells via passive diffusion, while it is non-toxic to mammalian cells and to fertilized mouse eggs cultured ex vivo.Our results demonstrate that the 'Leu3p-alpha-IotaRhoMu' constitutes a simpler and safer system for inducible gene expression in biomedical applications.

  7. IPM strategies and their dilemmas including an introduction to www.Eurowheat.org

    DEFF Research Database (Denmark)

    Jørgensen, Lise Nistrup; Hovmøller, Mogens Støvring; Hansen, Jens Grønbech

    2014-01-01

    Information about disease management in winter wheat (Triticum aestiva) in eight European countries was collated and analysed by scientists and extension workers within a European Network for Durable Exploitation (ENDURE). This included information about specific disease thresholds, decision...... information platformwww.EuroWheat.org was used for dissemination of information and results including information on control thresholds, cultural practices which can influence disease attack, fungicide efficacy, fungicide resistance and pathogen virulence, which are all elements supporting IPM for disease...... control in wheat. The platform is open to all users. The target groups of EuroWheat information are researchers, advisors, breeders and similar partners dealing with disease management in wheat....

  8. Impact of FFS on farmer's adoption of IPM options for tomato: A case study from the Gezira State, Sudan

    Directory of Open Access Journals (Sweden)

    Ahmed Mirghani Abdel Rahman

    2012-09-01

    Full Text Available In Sudan pests and diseases are the major problem of vegetables production. Tomato crop is considered as the most important vegetable crop in the country according to its economic and nutrition value. There are many pest and diseases retarding tomato production such as whitefly, American bollworm, TYLCV and powdery mildew. Therefore some IPM options for tomato and onion were validated in FFS in order to help farmers in controlling the most important pests and diseases. The main objective of this study was to determine the impact of FFS on farmer's adoption of IPM options for tomato in the Gezira State, Sudan. Field survey was used to collect data from three Farmer Field Schools in the Gezira State namely: Um Dagarsi, Hantoub and Faris in the 2009/2010 growing season. All FFS participants were used, i.e. 30 FFS- participants from each school. Equal number of non-FFS participants (90 was used for comparison, by using the simple random sampling technique. The collected data were statistically analyzed and interpreted using percentage, frequency distribution and chi-square test. The results showed that the FFS schools were positively affected farmer's adoption of IPM options for tomato. It can be concluded that the FFS approach is very efficient in the transfer of farm technology for vegetable farmers through their participation in various activities of FFS schools. Thus, FFS approach must become national policy, share authority of extension organizations in control and execution of FFS activities with farmer unions for more effective participations of clientele in all activities of the schools and More efforts should be exerted in distribution of all inputs to farmers with reasonable prices through various agricultural centres.

  9. A novel hybrid genetic algorithm for optimal design of IPM machines for electric vehicle

    Science.gov (United States)

    Wang, Aimeng; Guo, Jiayu

    2017-12-01

    A novel hybrid genetic algorithm (HGA) is proposed to optimize the rotor structure of an IPM machine which is used in EV application. The finite element (FE) simulation results of the HGA design is compared with the genetic algorithm (GA) design and those before optimized. It is shown that the performance of the IPMSM is effectively improved by employing the GA and HGA, especially by HGA. Moreover, higher flux-weakening capability and less magnet usage are also obtained. Therefore, the validity of HGA method in IPMSM optimization design is verified.

  10. A web-based decision support system to enhance IPM programs in Washington tree fruit.

    Science.gov (United States)

    Jones, Vincent P; Brunner, Jay F; Grove, Gary G; Petit, Brad; Tangren, Gerald V; Jones, Wendy E

    2010-06-01

    Integrated pest management (IPM) decision-making has become more information intensive in Washington State tree crops in response to changes in pesticide availability, the development of new control tactics (such as mating disruption) and the development of new information on pest and natural enemy biology. The time-sensitive nature of the information means that growers must have constant access to a single source of verified information to guide management decisions. The authors developed a decision support system for Washington tree fruit growers that integrates environmental data [140 Washington State University (WSU) stations plus weather forecasts from NOAA], model predictions (ten insects, four diseases and a horticultural model), management recommendations triggered by model status and a pesticide database that provides information on non-target impacts on other pests and natural enemies. A user survey in 2008 found that the user base was providing recommendations for most of the orchards and acreage in the state, and that users estimated the value at $ 16 million per year. The design of the system facilitates education on a range of time-sensitive topics and will make it possible easily to incorporate other models, new management recommendations or information from new sensors as they are developed.

  11. Investigation of using shrinking method in construction of Institute for Research in Fundamental Sciences Electron Linear Accelerator TW-tube (IPM TW-Linac tube)

    Science.gov (United States)

    Ghasemi, F.; Abbasi Davani, F.

    2015-06-01

    Due to Iran's growing need for accelerators in various applications, IPM's electron Linac project has been defined. This accelerator is a 15 MeV energy S-band traveling-wave accelerator which is being designed and constructed based on the klystron that has been built in Iran. Based on the design, operating mode is π /2 and the accelerating chamber consists of two 60cm long tubes with constant impedance and a 30cm long buncher. Amongst all construction methods, shrinking method is selected for construction of IPM's electron Linac tube because it has a simple procedure and there is no need for large vacuum or hydrogen furnaces. In this paper, different aspects of this method are investigated. According to the calculations, linear ratio of frequency alteration to radius change is 787.8 MHz/cm, and the maximum deformation at the tube wall where disks and the tube make contact is 2.7μ m. Applying shrinking method for construction of 8- and 24-cavity tubes results in satisfactory frequency and quality factor. Average deviations of cavities frequency of 8- and 24-cavity tubes to the design values are 0.68 MHz and 1.8 MHz respectively before tune and 0.2 MHz and 0.4 MHz after tune. Accelerating tubes, buncher, and high power couplers of IPM's electron linac are constructed using shrinking method.

  12. GCS component development cycle

    Science.gov (United States)

    Rodríguez, Jose A.; Macias, Rosa; Molgo, Jordi; Guerra, Dailos; Pi, Marti

    2012-09-01

    The GTC1 is an optical-infrared 10-meter segmented mirror telescope at the ORM observatory in Canary Islands (Spain). First light was at 13/07/2007 and since them it is in the operation phase. The GTC control system (GCS) is a distributed object & component oriented system based on RT-CORBA8 and it is responsible for the management and operation of the telescope, including its instrumentation. GCS has used the Rational Unified process (RUP9) in its development. RUP is an iterative software development process framework. After analysing (use cases) and designing (UML10) any of GCS subsystems, an initial component description of its interface is obtained and from that information a component specification is written. In order to improve the code productivity, GCS has adopted the code generation to transform this component specification into the skeleton of component classes based on a software framework, called Device Component Framework. Using the GCS development tools, based on javadoc and gcc, in only one step, the component is generated, compiled and deployed to be tested for the first time through our GUI inspector. The main advantages of this approach are the following: It reduces the learning curve of new developers and the development error rate, allows a systematic use of design patterns in the development and software reuse, speeds up the deliverables of the software product and massively increase the timescale, design consistency and design quality, and eliminates the future refactoring process required for the code.

  13. Addressing the human and technical dimensions of potato IPM using farmer field schools (FFS): CIP and partners' experience on late blight management

    Science.gov (United States)

    Starting in the 1990’s, the International Potato Center (CIP)’s integrated pest management team for potato late blight (IPM-LB) realized the importance of addressing the management of this complex potato disease by combining crop protection and management sciences, with social and behavioral science...

  14. Sustainability of European winter wheat- and maize-based cropping systems: Economic, environmental and social ex-post assessment of conventional and IPM-based systems

    NARCIS (Netherlands)

    Vasileiadis, V.P.; Dachbrodt-saaydeh, S.; Kudsk, P.; Colnenne-David, C.; Leprince, F.; Holb, I.J.; Kierzek, R.; Furlan, L.; Loddo, D.; Melander, B.; Jørgensen, L.N.; Newton, A.C.; Toque, C.; Dijk, van W.; Lefebvre, M.; Benezit, M.; Sattin, M.

    2017-01-01

    In order to ensure higher sustainability of winter wheat and maize production in Europe, cropping systems featuring different levels of Integrated Pest Management (IPM) need to be tested in the field and validated for their sustainability before being adopted by farmers. However, the sustainability

  15. The artifacts of component-based development

    International Nuclear Information System (INIS)

    Rizwan, M.; Qureshi, J.; Hayat, S.A.

    2007-01-01

    Component based development idea was floated in a conference name Mass Produced Software Components in 1968 (1). Since then engineering and scientific libraries are developed to reuse the previously developed functions. This concept is now widely used in SW development as component based development (CBD). Component-based software engineering (CBSE) is used to develop/ assemble software from existing components (2). Software developed using components is called component where (3). This paper presents different architectures of CBD such as Active X, common object request broker architecture (CORBA), remote method invocation (RMI) and simple object access protocol (SOAP). The overall objective of this paper is to support the practice of CBD by comparing its advantages and disadvantages. This paper also evaluates object oriented process model to adapt it for CBD. (author)

  16. How labour organization may affect technology adoption: an analytical framework analysing the case of integrated pest management

    NARCIS (Netherlands)

    Beckmann, V.; Wesseler, J.H.H.

    2003-01-01

    Integrated Pest Management (IPM) is an important component of sustainable agriculture. Farmers who switch from a more capital-intensive pesticide-based pest management strategy to IPM have to substitute capital with labour. The adoption of IPM will therefore depend, among other things, on the

  17. Uso dos diptera na análise entomotoxicológica e na estimativa do intervalo pós-morte (IPM - doi: 10.5102/ucs.v13i1.2846

    Directory of Open Access Journals (Sweden)

    Diogo Barth Pacini

    2015-07-01

    Full Text Available A entomologia forense é o estudo de insetos que são encontrados em locais de crimes, e são utilizados como vestígios, aumentando a possibilidade de encontrar a causa da morte e a estimar o intervalo pós-morte (IPM. Com base nessas análises os entomólogos e os peritos observaram que os componentes químicos utilizados pelo individuo, tais como medicamentos ou drogas, ou até mesmo o uso de venenos alterava o que já se conhecia da estimativa do IPM, surgindo, desse modo uma nova vertente nesta ciência, que é a entomotoxicologia forense. O presente trabalho bibliográfico descreve os princípios básicos da entomotoxicologia abordando principalmente a interferência na estimativa do intervalo pós-morte.

  18. The development of component-based information systems

    CERN Document Server

    Cesare, Sergio de; Macredie, Robert

    2015-01-01

    This work provides a comprehensive overview of research and practical issues relating to component-based development information systems (CBIS). Spanning the organizational, developmental, and technical aspects of the subject, the original research included here provides fresh insights into successful CBIS technology and application. Part I covers component-based development methodologies and system architectures. Part II analyzes different aspects of managing component-based development. Part III investigates component-based development versus commercial off-the-shelf products (COTS), includi

  19. A component-based groupware development methodology

    NARCIS (Netherlands)

    Guareis de farias, Cléver; Ferreira Pires, Luis; van Sinderen, Marten J.

    2000-01-01

    Software development in general and groupware applications in particular can greatly benefit from the reusability and interoperability aspects associated with software components. Component-based software development enables the construction of software artefacts by assembling prefabricated,

  20. IP-MLI: An Independency of Learning Materials from Platforms in a Mobile Learning using Intelligent Method

    Directory of Open Access Journals (Sweden)

    Mohammed Abdallh Otair

    2006-06-01

    Full Text Available Attempting to deliver a monolithic mobile learning system is too inflexible in view of the heterogeneous mixture of hardware and services available and the desirability of facility blended approaches to learning delivery, and how to build learning materials to run on all platforms[1]. This paper proposes a framework of mobile learning system using an intelligent method (IP-MLI . A fuzzy matching method is used to find suitable learning material design. It will provide a best matching for each specific platform type for each learner. The main contribution of the proposed method is to use software layer to insulate learning materials from device-specific features. Consequently, many versions of learning materials can be designed to work on many platform types.

  1. IPM for fresh-market lettuce production in the desert southwest: the produce paradox.

    Science.gov (United States)

    Palumbo, John C; Castle, Steven J

    2009-12-01

    In the 'Integrated Control Concept', Stern et al. emphasized that, although insecticides are necessary for agricultural production, they should only be used as a last resort and as a complement to biological control. They argued that selective insecticide use should only be attempted after it has been determined that insect control with naturally occurring biotic agents is not capable of preventing economic damage. However, they concluded their seminal paper by emphasizing that integrated control will not work where natural enemies are inadequate or where economic thresholds are too low to rely on biological control. Thus, it is no surprise that insect control in high-value, fresh-market lettuce crops grown in the desert southwest have relied almost exclusively on insecticides to control a complex of mobile, polyphagous pests. Because lettuce and leafy greens are short-season annual crops with little or no tolerance for insect damage or contamination, biological control is generally considered unacceptable. High expectations from consumers for aesthetically appealing produce free of pesticide residues further forces vegetable growers to use chemical control tactics that are not only effective but safe. Consequently, scientists have been developing integrated pest management (IPM) programs for lettuce that are aimed at reducing the economic, occupational and dietary risks associated with chemical controls of the past. Most of these programs have drawn upon the integrated control concept and promote the importance of understanding the agroecosystem, and the need to sample for pest status and use action thresholds for cost-effective insect control. More recently, pest management programs have implemented newly developed, reduced-risk chemistries that are selectively efficacious against key pests. This paper discusses the influence that the integrated control concept, relative to zero-tolerance market standards and other constraints, has had on the adoption of pest

  2. Developing a Model Component

    Science.gov (United States)

    Fields, Christina M.

    2013-01-01

    The Spaceport Command and Control System (SCCS) Simulation Computer Software Configuration Item (CSCI) is responsible for providing simulations to support test and verification of SCCS hardware and software. The Universal Coolant Transporter System (UCTS) was a Space Shuttle Orbiter support piece of the Ground Servicing Equipment (GSE). The initial purpose of the UCTS was to provide two support services to the Space Shuttle Orbiter immediately after landing at the Shuttle Landing Facility. The UCTS is designed with the capability of servicing future space vehicles; including all Space Station Requirements necessary for the MPLM Modules. The Simulation uses GSE Models to stand in for the actual systems to support testing of SCCS systems during their development. As an intern at Kennedy Space Center (KSC), my assignment was to develop a model component for the UCTS. I was given a fluid component (dryer) to model in Simulink. I completed training for UNIX and Simulink. The dryer is a Catch All replaceable core type filter-dryer. The filter-dryer provides maximum protection for the thermostatic expansion valve and solenoid valve from dirt that may be in the system. The filter-dryer also protects the valves from freezing up. I researched fluid dynamics to understand the function of my component. The filter-dryer was modeled by determining affects it has on the pressure and velocity of the system. I used Bernoulli's Equation to calculate the pressure and velocity differential through the dryer. I created my filter-dryer model in Simulink and wrote the test script to test the component. I completed component testing and captured test data. The finalized model was sent for peer review for any improvements. I participated in Simulation meetings and was involved in the subsystem design process and team collaborations. I gained valuable work experience and insight into a career path as an engineer.

  3. A systematic approach for component-based software development

    NARCIS (Netherlands)

    Guareis de farias, Cléver; van Sinderen, Marten J.; Ferreira Pires, Luis

    2000-01-01

    Component-based software development enables the construction of software artefacts by assembling prefabricated, configurable and independently evolving building blocks, called software components. This paper presents an approach for the development of component-based software artefacts. This

  4. Technology development for special nuclear components

    International Nuclear Information System (INIS)

    Sanatkumar, A.

    1994-01-01

    One of the attractive features of Candu Pressurised Heavy Water Reactor design which influenced the decision to make it the foundation of our nuclear power programme, is that its main components (calandria, end shields, coolant channel components) are relatively simple - in comparison with reactor pressure vessel and associated components of Boiling Water Reactors or Pressurised Water Reactors - and considered to be within the scope of manufacture of developing countries. Over the last two decades, India has been very successful in technology development in many important and critical areas. We are now about to launch the construction of the first 500 MWe PHWR project at Tarapur. In this context, this paper focuses attention on some of the aspects relating to self-reliance in design, engineering and manufacture of these special components as currently perceived. (author). 3 refs

  5. Space storable propulsion components development

    Science.gov (United States)

    Hagler, R., Jr.

    1982-01-01

    The current development status of components to control the flow of propellants (liquid fluorine and hydrazine) in a demonstration space storable propulsion system is discussed. The criteria which determined the designs for the pressure regulator, explosive-actuated valves, propellant shutoff valve, latching solenoid-actuated valve and propellant filter are presented. The test philosophy that was followed during component development is outlined. The results from compatibility demonstrations for reusable connectors, flange seals, and CRES/Ti-6Al4V transition tubes and the evaluations of processes for welding (hand-held TIG, automated TIG, and EB), cleaning for fluorine service, and decontamination after fluorine exposure are described.

  6. Component-based development of software language engineering tools

    NARCIS (Netherlands)

    Ssanyu, J.; Hemerik, C.

    2011-01-01

    In this paper we outline how Software Language Engineering (SLE) could benefit from Component-based Software Development (CBSD) techniques and present an architecture aimed at developing a coherent set of lightweight SLE components, fitting into a general-purpose component framework. In order to

  7. Identifying obstacles and ranking common biological control research priorities for Europe to manage most economically important pests in arable, vegetable and perennial crops

    NARCIS (Netherlands)

    Lamichhane, Jay Ram; Bischoff-Schaefer, Monika; Bluemel, Sylvia; Dachbrodt-Saaydeh, Silke; Dreux, Laure; Jansen, Jean Pierre; Kiss, Jozsef; Kohl, Jurgen; Kudsk, Per; Malausa, Thibaut; Messéan, Antoine; Nicot, Philippe C.; Ricci, Pierre; Thibierge, Jérôme; Villeneuve, François

    2017-01-01

    EU agriculture is currently in transition from conventional crop protection to integrated pest management (IPM). Because biocontrol is a key component of IPM, many European countries recently have intensified their national efforts on biocontrol research and innovation (R&I), although such

  8. Investigation Of Information Sources And Communication Channels ...

    African Journals Online (AJOL)

    Extension of integrated pest management (IPM) as a component of sustainable agricultural development, involves empowering farmers. Facilitating the information accessibility of farmer groups seems as empowerment strategy. This strategy is based on identification of related patterns, including information sources and ...

  9. Development of acidic processes for decontaminating LMFBR components

    Energy Technology Data Exchange (ETDEWEB)

    Hill, E F [Rockwell International, Atomics International Division, Canoga Park (United States); Colburn, R P; Lutton, J M; Maffei, H P [Hanford Engineering Development Laboratory, Richland (United States)

    1978-08-01

    The objective of the DOE decontamination program is to develop a well characterized chemical decontamination process for application to LMFBR primary system components that subsequently permits contact maintenance and allows requalification of the components for reuse in reactors. The paper describes the subtasks of deposit characterization, development of requalification and process acceptance criteria, development of process evaluation techniques and studies which led to a new acidic process for decontaminating 304 stainless steel hot leg components.

  10. Development of acidic processes for decontaminating LMFBR components

    International Nuclear Information System (INIS)

    Hill, E.F.; Colburn, R.P.; Lutton, J.M.; Maffei, H.P.

    1978-01-01

    The objective of the DOE decontamination program is to develop a well characterized chemical decontamination process for application to LMFBR primary system components that subsequently permits contact maintenance and allows requalification of the components for reuse in reactors. The paper describes the subtasks of deposit characterization, development of requalification and process acceptance criteria, development of process evaluation techniques and studies which led to a new acidic process for decontaminating 304 stainless steel hot leg components

  11. Residual toxicity of insecticides used in Tunisian citrus orchards on the imported parasitoid Diachasmimorpha longicaudata (Hymenoptera: Braconidae: Implications for IPM program of Ceratitis capitata (Diptera: Tephritidae

    Directory of Open Access Journals (Sweden)

    Ahlem Harbi

    2017-12-01

    Full Text Available Citrus agro-industry is globally harshened mainly by Ceratitis capitata (Wiedemann, the most worldwide destructive tephritid fruit fly species. Citrus agro-industry is one of the pillars of Tunisia economy, and by hence, harshened by this species. Tunisia has established an Integrated Pest Management (IPM programme against citrus pests, including C. capitata, that rely on the structured use of pesticides, on the application several trapping protocols, along with pilot-scale sterile insect technique program and, since 2013, with pilot-scale releases of the braconid parasitoid Diachasmimorpha longicaudata Ashmed (Hymenoptera: Braconidae. Insecticide side-effects on parasitoids and other natural enemies are being requested for a successful implementation of biological control within any IPM programme. However, these data are almost scarce for the braconid species D. longicaudata. To this end, we have determined the side-effects of malathion, methidathion, acetamiprid, azadiractin, abamectin, deltametrin+thiacloprid and spinosad, as the most popular insecticides used in Tunisia either as fresh residues or at several aged time points, on the parasitoid D. longicaudata according the IOBC pesticide harm-classification. IOBC classification evolution of residues over time had allowed determining the best combination of pesticide applications in a structured fashion with the viable releases of D. longicaudata for the control of C. capitata in Tunisian citrus agro-ecosystems.

  12. Residual toxicity of insecticides used in Tunisian citrus orchards on the imported parasitoid Diachasmimorpha longicaudata (Hymenoptera: Braconidae): Implications for IPM program of Ceratitis capitata (Diptera: Tephritidae)

    Energy Technology Data Exchange (ETDEWEB)

    Harbi, A.; Abbes, K.; Sabater-Muñoz, B.; Beitia, F.; Chermiti, B.

    2017-07-01

    Citrus agro-industry is globally harshened mainly by Ceratitis capitata (Wiedemann), the most worldwide destructive tephritid fruit fly species. Citrus agro-industry is one of the pillars of Tunisia economy, and by hence, harshened by this species. Tunisia has established an Integrated Pest Management (IPM) programme against citrus pests, including C. capitata, that rely on the structured use of pesticides, on the application several trapping protocols, along with pilot-scale sterile insect technique program and, since 2013, with pilot-scale releases of the braconid parasitoid Diachasmimorpha longicaudata Ashmed (Hymenoptera: Braconidae). Insecticide side-effects on parasitoids and other natural enemies are being requested for a successful implementation of biological control within any IPM programme. However, these data are almost scarce for the braconid species D. longicaudata. To this end, we have determined the side-effects of malathion, methidathion, acetamiprid, azadiractin, abamectin, deltametrin+thiacloprid and spinosad, as the most popular insecticides used in Tunisia either as fresh residues or at several aged time points, on the parasitoid D. longicaudata according the IOBC pesticide harm-classification. IOBC classification evolution of residues over time had allowed determining the best combination of pesticide applications in a structured fashion with the viable releases of D. longicaudata for the control of C. capitata in Tunisian citrus agro-ecosystems.

  13. Component reliability analysis for development of component reliability DB of Korean standard NPPs

    International Nuclear Information System (INIS)

    Choi, S. Y.; Han, S. H.; Kim, S. H.

    2002-01-01

    The reliability data of Korean NPP that reflects the plant specific characteristics is necessary for PSA and Risk Informed Application. We have performed a project to develop the component reliability DB and calculate the component reliability such as failure rate and unavailability. We have collected the component operation data and failure/repair data of Korean standard NPPs. We have analyzed failure data by developing a data analysis method which incorporates the domestic data situation. And then we have compared the reliability results with the generic data for the foreign NPPs

  14. Residual toxicity of insecticides used in Tunisian citrus orchards on the imported parasitoid Diachasmimorpha longicaudata (Hymenoptera: Braconidae): Implications for IPM program of Ceratitis capitata (Diptera: Tephritidae)

    OpenAIRE

    Ahlem Harbi; Khaled Abbes; Beatriz Sabater-Muñoz; Francisco Beitia; Brahim Chermiti

    2017-01-01

    Citrus agro-industry is globally harshened mainly by Ceratitis capitata (Wiedemann), the most worldwide destructive tephritid fruit fly species. Citrus agro-industry is one of the pillars of Tunisia economy, and by hence, harshened by this species. Tunisia has established an Integrated Pest Management (IPM) programme against citrus pests, including C. capitata, that rely on the structured use of pesticides, on the application several trapping protocols, along with pilot-scale sterile insect t...

  15. An Integrated Pest Management Intervention Improves Knowledge, Pest Control, and Practices in Family Child Care Homes.

    Science.gov (United States)

    Stephens, Michelle; Hazard, Kimberly; Moser, Debra; Cox, Dana; Rose, Roberta; Alkon, Abbey

    2017-10-26

    To reduce young children's exposure to pesticides when attending family child care homes (FCCHs), we developed an integrated pest management (IPM) intervention for FCCH directors. First, we developed IPM educational materials and resources to provide the foundation for an IPM educational intervention for FCCHs. Next, we conducted and evaluated a six-month nurse child care health consultant (CCHC)-led education and consultation IPM intervention to increase IPM knowledge, IPM practices, IPM policies, and decrease the presence or evidence of pests. The pilot intervention study was conducted by three CCHCs in 20 FCCHs in three counties in California. Pre- and post-intervention measures were completed by the FCCH directors and observation measures were completed by the CCHCs. Results indicated significant increases in IPM knowledge, ( t -statistic (degrees of freedom), ( t (df) = 2.55(10), p child care homes to harmful chemicals.

  16. Frontiers in NDE research nearing maturity for exploitation to ensure structural integrity of pressure retaining components

    International Nuclear Information System (INIS)

    Raj, Baldev; Mukhopadhyay, C.K.; Jayakumar, T.

    2006-01-01

    In this paper, research and developmental efforts that demonstrate high sensitivity detection and characterization of defects and assessment of microstructural degradation, residual stresses and fatigue damage in materials using different non-destructive evaluation (NDE) techniques, have been discussed. Applications of eddy current techniques for quantitative defect characterization and for generalized applications, and remote field eddy current technique for inspection of steam generator and heat exchanger tubes have been discussed. Advanced ultrasonic methods such as time of flight diffraction, synthetic aperture focusing technique, phased array and signal processing for detection, characterization and imaging of defects have been discussed. Applications of ultrasonics and magnetic Barkhausen emission techniques for characterization of microstructures and residual stresses have been discussed. Applications of acoustic emission and infrared thermography techniques for weld quality evaluation of critical nuclear components as part of intelligent processing of materials (IPM) work have been discussed. Application of acoustic emission technique for integrity assessment of pressurized components has been discussed. Development of a software called assets and infrastructure management system (AIMS), for storing and retrieving information for various materials, components and systems, has also been highlighted. The techniques and applications discussed are result of systematic and innovative R and D efforts in the multidisciplinary areas of physics, materials, instrumentation, sensors and softwares for providing solutions to various challenging problems

  17. Integrated pest management and entomopathogenic fungal biotechnology in the Latin Americas: II key research and development prerequisites

    International Nuclear Information System (INIS)

    Khachatourians, George G; Valencia, Edison

    1999-01-01

    In the first part of this review article (Valencia and Khachatourians, 1998) we presented the special opportunity that entomopathogenic fungi (EPF) offer for integrated pest management (IPM) in the Latin Americas. As expected, along with the opportunities, there are challenges for the use of EPF. First that there are only two fungi, Beauveria bassiana and Metarhizium anisopliae, for which some prerequisite knowledge of basic and applied mycology for industrial research and development (R and D) are in place. Because of precedent setting leadership in the development of certain EPF, e.g., B. bassiana in IPM, Latin America stands to contribute to and gain from future

  18. Development and Implementation of Integrated Pest Management in ...

    African Journals Online (AJOL)

    Nafiisah

    This paper reviews the status of Integrated Pest Management (IPM) research in. Mauritius and also reports on the successful cases of IPM implementation during ... Tool. Activity. Status. Source. Biological control. Introduce parasitoids .... 10 g sugar in 1 L of water) in plastic bottles as one option to manage fruit flies in.

  19. Development of radiation hard components for remote maintenance

    International Nuclear Information System (INIS)

    Oka, Kiyoshi; Obara, Kenjiro; Kakudate, Satoshi; Tominaga, Ryuichiro; Akada, Tamio; Morita, Hirosuke.

    1997-01-01

    In International Thermonuclear Experimental Reactor (ITER), in-vessel remote-handling is inevitably required to assemble and maintain activated in-vessel components due to D-T operation. The components of the in-vessel remote-handling system must have sufficient radiation hardness to allow for operation under an intense gamma-ray radiation of over 30 kGy/h for periods up to more than 1,000 hours. To this end, extensive irradiation tests and quality improvements including the optimization of material composition have been conducted through the ITER R and D program in order to develop radiation hard components which satisfy radiation doses from 10 MGy to 100 MGy at the dose rate of 10 kGy/h. This paper outlines the latest status of the radiation hard component development that has been conducted as the Japan Home Team's contribution to ITER. The remote-handling components tested are categorized into either robotics, viewing systems or common components. The irradiation tests include commercial base products for screening both modified and newly developed products to improve their radiation hardness. (author)

  20. Development of standard components for remote handling

    International Nuclear Information System (INIS)

    Taguchi, Kou; Kakudate, Satoshi; Nakahira, Masataka; Ito, Akira

    1998-01-01

    The core of Fusion Experimental Reactor consists of various components such as superconducting magnets and forced-cooled in-vessel components, which are remotely maintained due to intense of gamma radiation. Mechanical connectors such as cooling pipe connections, insulation joints and electrical connectors are commonly used for maintenance of these components and have to be standardized in terms of remote handling. This paper describes these mechanical connectors developed as the standard component compatible with remote handling and tolerable for radiation. (author)

  1. Development of standard components for remote handling

    Energy Technology Data Exchange (ETDEWEB)

    Taguchi, Kou; Kakudate, Satoshi; Nakahira, Masataka; Ito, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-04-01

    The core of Fusion Experimental Reactor consists of various components such as superconducting magnets and forced-cooled in-vessel components, which are remotely maintained due to intense of gamma radiation. Mechanical connectors such as cooling pipe connections, insulation joints and electrical connectors are commonly used for maintenance of these components and have to be standardized in terms of remote handling. This paper describes these mechanical connectors developed as the standard component compatible with remote handling and tolerable for radiation. (author)

  2. Development of a model forecasting Dermanyssus gallinae's population dynamics for advancing Integrated Pest Management in laying hen facilities.

    Science.gov (United States)

    Mul, Monique F; van Riel, Johan W; Roy, Lise; Zoons, Johan; André, Geert; George, David R; Meerburg, Bastiaan G; Dicke, Marcel; van Mourik, Simon; Groot Koerkamp, Peter W G

    2017-10-15

    The poultry red mite, Dermanyssus gallinae, is the most significant pest of egg laying hens in many parts of the world. Control of D. gallinae could be greatly improved with advanced Integrated Pest Management (IPM) for D. gallinae in laying hen facilities. The development of a model forecasting the pests' population dynamics in laying hen facilities without and post-treatment will contribute to this advanced IPM and could consequently improve implementation of IPM by farmers. The current work describes the development and demonstration of a model which can follow and forecast the population dynamics of D. gallinae in laying hen facilities given the variation of the population growth of D. gallinae within and between flocks. This high variation could partly be explained by house temperature, flock age, treatment, and hen house. The total population growth variation within and between flocks, however, was in part explained by temporal variation. For a substantial part this variation was unexplained. A dynamic adaptive model (DAP) was consequently developed, as models of this type are able to handle such temporal variations. The developed DAP model can forecast the population dynamics of D. gallinae, requiring only current flock population monitoring data, temperature data and information of the dates of any D. gallinae treatment. Importantly, the DAP model forecasted treatment effects, while compensating for location and time specific interactions, handling the variability of these parameters. The characteristics of this DAP model, and its compatibility with different mite monitoring methods, represent progression from existing approaches for forecasting D. gallinae that could contribute to advancing improved Integrated Pest Management (IPM) for D. gallinae in laying hen facilities. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Component-Based Approach in Learning Management System Development

    Science.gov (United States)

    Zaitseva, Larisa; Bule, Jekaterina; Makarov, Sergey

    2013-01-01

    The paper describes component-based approach (CBA) for learning management system development. Learning object as components of e-learning courses and their metadata is considered. The architecture of learning management system based on CBA being developed in Riga Technical University, namely its architecture, elements and possibilities are…

  4. Advanced Electrical Materials and Components Development: An Update

    Science.gov (United States)

    Schwarze, Gene E.

    2005-01-01

    The primary means to develop advanced electrical components is to develop new and improved materials for magnetic components (transformers, inductors, etc.), capacitors, and semiconductor switches and diodes. This paper will give an update of the Advanced Power Electronics and Components Technology being developed by the NASA Glenn Research Center for use in future Power Management and Distribution subsystems used in space power systems for spacecraft and lunar and planetary surface power. The initial description and status of this technology program was presented two years ago at the First International Energy Conversion Engineering Conference held at Portsmouth, Virginia, August 2003. The present paper will give a brief background of the previous work reported and a summary of research performed the past several years on soft magnetic materials characterization, dielectric materials and capacitor developments, high quality silicon carbide atomically smooth substrates, and SiC static and dynamic device characterization under elevated temperature conditions. The rationale for and the benefits of developing advanced electrical materials and components for the PMAD subsystem and also for the total power system will also be briefly discussed.

  5. Applying of component system development in object methodology

    Directory of Open Access Journals (Sweden)

    Milan Mišovič

    2013-01-01

    Full Text Available In the last three decades, the concept and implementation of component-based architectures have been promoted in software systems creation. Increasingly complex demands are placed on the software component systems, in particular relating to the dynamic properties. The emergence of such requirements has been gradually enforced by the practice of development and implementation of these systems, especially for information systems software.Just the information systems (robust IS of different types require that target software meets their requirements. Among other things, we mean primarily the adaptive processes of different domains, high distributives due to the possibilities of the Internet 2.0, acceptance of high integrity of life domains (process, data and communications integrity, scalability, and flexible adaptation to process changes, a good context for external devices and transparent structure of the sub-process modules and architectural units.Of course, the target software of required qualities and the type robust cannot be a monolith. As commonly known, development of design toward information systems software has clearly come to the need for the software composition of completely autonomous, but cooperating architectural units that communicate with each other using messages of prescribed formats.Although for such units there were often used the so called subsystems and modules, see (Jac, Boo, Rumbo, 1998 and (Arlo, Neus, 2007, their abstraction being gradually enacted as the term component. In other words, the subsystems and modules are specific types of components.In (Král, Žeml, 2000 and (Král, Žeml, 2003 there are considered two types of target software of information systems. The first type – there are SWC (Software Components, composed of permanently available components, which are thought as services – Confederate software. The second type – SWA (Software Alliance, called semi Confederate, formed during the run-time of the

  6. The Influence of Selected Companion Crops on Diamond Black Moth (Plutella Xylostella): Development and Investation on Cabbage

    International Nuclear Information System (INIS)

    Raini, R.K

    2002-01-01

    Diamond black moth (DBM) Plutella xylostella L. (Lepidoptera: Plutellidae) is the most serious pest of brassica in Kenya. Resistance to chemicals has been reported from various parts of the country. This research investigated brassica and non-brassica crops potential in 'push-pull' strategy toward developing an Integrated Pest Management (IPM) program for DBM in Kenya. The study focused on evaluating the potential influence of selected crops on DBM oviposition, development and infestation on cabbage. Results indicate that DBM preferred to oviposition on brassica crops. No significant differences were observed on DBM development on host plants that supported full development. Minimum development was recorded on non-brassica crop Cleome gynandra, L. In field trials, the mustard, cloeme and coriander intercrops recorded significantly low infestation compared to other intercrops and demonstrated qulities which could be utilized in the development of IPM-option for the DBM

  7. Synergy between chemical and biological control in the IPM of currant-lettuce aphid (Nasonovia ribisnigri) in Canterbury, New Zealand.

    Science.gov (United States)

    Fagan, L L; McLachlan, A; Till, C M; Walker, M K

    2010-04-01

    Field trials were conducted at four Canterbury, New Zealand locations in 2005-06 to determine if the synergistic effects of biological control by natural enemies and standard drenching techniques controlled lettuce aphid populations throughout the entire growing season. Chemical usage significantly lowered aphid densities in the outer, wrapper and heart leaves compared to control plants at most times. However, in mid-summer, natural enemies, such as the brown lacewing (Micromus tasmaniae), 11-spotted ladybird beetle (Coccinella undecimpunctata) and small hoverfly larvae (Melanostoma fasciatum), were more than sufficient to control lettuce aphids without the use of insecticides. Drenching, in addition to natural enemy attack, appears to be required in early spring and late summer to maintain very low levels of lettuce aphid. Given the potential for imidacloprid resistance to develop, it may be advisable to restrict drenches to these key periods in order to allow populations of natural enemies to maintain control of prey populations. We recommend industry support the validation of action thresholds across different regions within New Zealand and focus on the seasonal biology of predators to assist growers with the sustainable long-term control of lettuce aphids. The inclusion of additional data into an economic model to compare pest damage with predator loading would be useful for growers in managing aphid problems. These results will assist in the continued improvement and development of a sustainable IPM strategy for lettuce aphids in New Zealand and elsewhere.

  8. Component framework support for developing device drivers

    OpenAIRE

    Michiels, Sam; Kenens, Peter; Matthijs, Frank; Walravens, Dirk; Berbers, Yolande; Verbaeten, Pierre

    2000-01-01

    In this paper, we advocate the use of component framework technology for developing state-of-the-art system software. Relevant contributions of DiPS (Distrinet Protocol Stack), a component framework, include its anonymous interaction model, connectors for handling non-functional issues such as the concurrency model, and builder support. DiPS has effectively been used in industrial protocol stacks. This paper shows how we are using the DiPS component framework to build and support flexib...

  9. Applying of component system development in object methodology, case study

    Directory of Open Access Journals (Sweden)

    Milan Mišovič

    2013-01-01

    Full Text Available To create computarization target software as a component system has been a very strong requirement for the last 20 years of software developing. Finally, the architectural components are self-contained units, presenting not only partial and overall system behavior, but also cooperating with each other on the basis of their interfaces. Among others, components have allowed flexible modification of processes the behavior of which is the foundation of components behavior without changing the life of the component system. On the other hand, the component system makes it possible, at design time, to create numerous new connections between components and thus creating modified system behaviors. This all enables the company management to perform, at design time, required behavioral changes of processes in accordance with the requirements of changing production and market.The development of software which is generally referred to as SDP (Software Development Process contains two directions. The first one, called CBD (Component–Based Development, is dedicated to the development of component–based systems CBS (Component–based System, the second target is the development of software under the influence of SOA (Service–Oriented Architecture. Both directions are equipped with their different development methodologies. The subject of this paper is only the first direction and application of development of component–based systems in its object–oriented methodologies. The requirement of today is to carry out the development of component-based systems in the framework of developed object–oriented methodologies precisely in the way of a dominant style. In some of the known methodologies, however, this development is not completely transparent and is not even recognized as dominant. In some cases, it is corrected by the special meta–integration models of component system development into an object methodology.This paper presents a case study

  10. Pest Control in the School Environment:Adopting Integrated Pest Management

    Science.gov (United States)

    Learn about establishing a school IPM program, including developing an official IPM policy statement, setting roles for participants and pest management objectives, inspecting sites, setting action threshold, applying IPM strategies and evaluating results.

  11. Research on development model of nuclear component based on life cycle management

    International Nuclear Information System (INIS)

    Bao Shiyi; Zhou Yu; He Shuyan

    2005-01-01

    At present the development process of nuclear component, even nuclear component itself, is more and more supported by computer technology. This increasing utilization of the computer and software has led to the faster development of nuclear technology on one hand and also brought new problems on the other hand. Especially, the combination of hardware, software and humans has increased nuclear component system complexities to an unprecedented level. To solve this problem, Life Cycle Management technology is adopted in nuclear component system. Hence, an intensive discussion on the development process of a nuclear component is proposed. According to the characteristics of the nuclear component development, such as the complexities and strict safety requirements of the nuclear components, long-term design period, changeable design specifications and requirements, high capital investment, and satisfaction for engineering codes/standards, the development life-cycle model of nuclear component is presented. The development life-cycle model is classified at three levels, namely, component level development life-cycle, sub-component development life-cycle and component level verification/certification life-cycle. The purposes and outcomes of development processes are stated in detailed. A process framework for nuclear component based on system engineering and development environment of nuclear component is discussed for future research work. (authors)

  12. Fiber Laser Component Testing for Space Qualification Protocol Development

    Science.gov (United States)

    Falvey, S.; Buelow, M.; Nelson, B.; Starcher, Y.; Thienel, L.; Rhodes, C.; Tull, Jackson; Drape, T.; Westfall, C.

    A test protocol for the space qualifying of Ytterbium-doped diode-pumped fiber laser (DPFL) components was developed under the Bright Light effort, sponsored by AFRL/VSE. A literature search was performed and summarized in an AMOS 2005 conference paper that formed the building blocks for the development of the test protocol. The test protocol was developed from the experience of the Bright Light team, the information in the literature search, and the results of a study of the Telcordia standards. Based on this protocol developed, test procedures and acceptance criteria for a series of vibration, thermal/vacuum, and radiation exposure tests were developed for selected fiber laser components. Northrop Grumman led the effort in vibration and thermal testing of these components at the Aerospace Engineering Facility on Kirtland Air Force Base, NM. The results of the tests conducted have been evaluated. This paper discusses the vibration and thermal testing that was executed to validate the test protocol. The lessons learned will aid in future assessments and definition of space qualification protocols. Components representative of major items within a Ytterbium-doped diode-pumped fiber laser were selected for testing; including fibers, isolators, combiners, fiber Bragg gratings, and laser diodes. Selection of the components was based on guidelines to test multiple models of typical fiber laser components. A goal of the effort was to test two models (i.e. different manufacturers) of each type of article selected, representing different technologies for the same type of device. The test articles did not include subsystems or systems. These components and parts may not be available commercial-off-the-shelf (COTS), and, in fact, many are custom articles, or newly developed by the manufacturer. The primary goal for this effort is a completed taxonomy that lists all relevant laser components, modules, subsystems, and interfaces, and cites the documentation for space

  13. Development of components for the gas-cooled fast breeder reactor program

    International Nuclear Information System (INIS)

    Dee, J.B.; Macken, T.

    1977-01-01

    The gas-cooled fast breeder reactor (GCFR) component development program is based on an extension of high temperature gas-cooled reactor (HTGR) component technology; therefore, the GCFR development program is addressed primarily to components which differ in design and requirements from HTGR components. The principal differences in primary system components are due to the increase in helium coolant pressure level, which benefits system size and efficiency in the GCFR, and differences in the reactor internals and fuel handling systems due to the use of the compact metal-clad core. The purpose of this paper is to present an overview of the principal component design differences between the GCFR and HTGR and the consequent influences of these differences on GCFR component development programs. Development program plans are discussed and include those for the prestressed concrete reactor vessel (PCRV), the main helium circulator and its supporting systems, the steam generators, the reactor thermal shielding, and the fuel handling system. Facility requirements to support these development programs are also discussed. Studies to date show that GCFR component development continues to appear to be incremental in nature, and the required tests are adaptations of related HTGR test programs. (Auth.)

  14. Development of radiation hardness components for ITER remote maintenance

    Energy Technology Data Exchange (ETDEWEB)

    Obara, Kenjiro; Kakudate, Satoshi; Oka, Kiyoshi; Ito, Akira [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Yagi, Toshiaki; Morita, Yousuke

    1998-04-01

    In the ITER, in-vessel remote handling is required to assemble and maintain in-vessel components in DT operations. Since in-vessel remote handling systems must operate under intense gamma ray radiation exceeding 30 kGy/h, their components must have sufficiently high radiation hardness to allow maintenance long enough in ITER in-vessel environments. Thus, extensive radiation tests and quality improvement, including optimization of material compositions, have been conducted through the ITER R and D program to develop radiation hardness components that meet radiation doses from 10 to 100 MGy at 10 kGy/h. This paper presents the latest on radiation hardness component development conducted by the Japan Home Team as a contribution to the ITER. The remote handling components tested are categorized for use in robotic or viewing systems, or as common components. Radiation tests have been conducted on commercially available products for screening, on modified products, and on new products to improve the radiation hardness. (author)

  15. Development of radiation hardness components for ITER remote maintenance

    International Nuclear Information System (INIS)

    Obara, Kenjiro; Kakudate, Satoshi; Oka, Kiyoshi; Ito, Akira; Yagi, Toshiaki; Morita, Yousuke

    1998-01-01

    In the ITER, in-vessel remote handling is required to assemble and maintain in-vessel components in DT operations. Since in-vessel remote handling systems must operate under intense gamma ray radiation exceeding 30 kGy/h, their components must have sufficiently high radiation hardness to allow maintenance long enough in ITER in-vessel environments. Thus, extensive radiation tests and quality improvement, including optimization of material compositions, have been conducted through the ITER R and D program to develop radiation hardness components that meet radiation doses from 10 to 100 MGy at 10 kGy/h. This paper presents the latest on radiation hardness component development conducted by the Japan Home Team as a contribution to the ITER. The remote handling components tested are categorized for use in robotic or viewing systems, or as common components. Radiation tests have been conducted on commercially available products for screening, on modified products, and on new products to improve the radiation hardness. (author)

  16. Sterile Males of Ceratitis Capitata (Diptera: Tephritidae) as Disseminators of Beauveria Bassiana Conidia for IPM Strategies

    Energy Technology Data Exchange (ETDEWEB)

    Flores, Salvador; Campos, Sergio; Montoya, Pablo [Programa Moscafrut SAGARPA-IICA, Camino a los Cacahotales S/N, Metapa de Dominguez, Chiapas 30860 (Mexico); Villasenor, Antonio; Valle, Alvaro; Enkerlin, Walther [Codireccion Mexico, Programa Regional Moscamed Mexico- Guatemala-Estados Unidos (Guatemala); Toledo, Jorge; Liedo, Pablo [Departamento Agricultura Sociedad y Ambiente, El Colegio de la Frontera Sur. Carretera Antiguo Aeropuerto, Tapachula, Chiapas 30700 (Mexico)

    2014-01-15

    Full text: Sterile Mediterranean fruit fly, Ceratitis capitata (Wied.), males were evaluated as vectors to spread Beauveria bassiana (Bals) conidia to wild C. capitata populations under field conditions. The inoculated sterile males were released by air, using the chilled adult technique over 7000 ha of coffee growing in Chimaltenango, Guatemala, Central America. The impact of releases was determined using dry traps baited with a food attractant. The effects of these releases on Apis mellifera, Linnaeus (honey bee), Hypothenemus hampei, Ferrari (coffee berry borer) and the parasitic mite Varroa destructor (Oudeman) were also evaluated. Inoculated sterile males were able to transmit fungal spores to 44% of the wild C. capitata flies captured in traps, which likely were infected through intra- and intersexual interactions during leks, mating or mating attempts. There was no transmission of the fungal spores to non- target insect species such as coffee berry borer, honey bees or varroa. We conclude that sterile males of Mediterranean fruit fly inoculated with B. bassiana can act as effective vectors of conidia to wild populations, constituting a safe, environmentally friendly and selective alternative for suppressing the medfly under a Sterile Insect Technique-based IPM approach. (author)

  17. High-level Component Interfaces for Collaborative Development: A Proposal

    Directory of Open Access Journals (Sweden)

    Thomas Marlowe

    2009-12-01

    Full Text Available Software development has rapidly moved toward collaborative development models where multiple partners collaborate in creating and evolving software intensive systems or components of sophisticated ubiquitous socio-technical-ecosystems. In this paper we extend the concept of software interface to a flexible high-level interface as means for accommodating change and localizing, controlling and managing the exchange of knowledge and functional, behavioral, quality, project and business related information between the partners and between the developed components.

  18. Plant protection and food safety: notes on cereal chain

    OpenAIRE

    Pasquale Trematerra; Maria Lodovica Gullino

    2009-01-01

    Integrated Pest Management (or IPM) is a decision-making process that prevents pest activity and infestation by combining several strategies to achieve long-term solutions. Components of an IPM program may include education, proper waste management, structural repair, maintenance, biological and mechanical control techniques, and pesticide application. These tactics should meet economic, public health and environmental goals. In this paper new methods and strategies of pest control in cereal ...

  19. Evolution of Stored-Product Entomology: Protecting the World Food Supply.

    Science.gov (United States)

    Hagstrum, David W; Phillips, Thomas W

    2017-01-31

    Traditional methods of stored-product pest control were initially passed from generation to generation. Ancient literature and archaeology reveal hermetic sealing, burning sulfur, desiccant dusts, and toxic botanicals as early control methods. Whereas traditional nonchemical methods were subsequently replaced by synthetic chemicals, other traditional methods were improved and integrated with key modern pesticides. Modern stored-product integrated pest management (IPM) makes decisions using knowledge of population dynamics and threshold insect densities. IPM programs are now being fine-tuned to meet regulatory and market standards. Better sampling methods and insights from life histories and ecological studies have been used to optimize the timing of pest management. Over the past 100 years, research on stored-product insects has shifted from being largely concentrated within 10 countries to being distributed across 65 countries. Although the components of IPM programs have been well researched, more research is needed on how these components can be combined to improve effectiveness and assure the security of postharvest food as the human population increases.

  20. Development of Innovative Component for the Region’s Economic Security

    Directory of Open Access Journals (Sweden)

    Irina Markovna Golova

    2017-12-01

    Full Text Available This article studies the development of innovative component for the region’s economic security. The hypothesis of the study is that in the context of globalization and development of network society, innovation is becoming one of the key elements ensuring the economic security of a region. We considered the relationship between the concepts of sustainable development and economic security. The authors show that currently, the economic security of the country directly depends on its place within the innovation chain. We substantiate that Russian Federation and its regions need to shift to the innovation development based on strengthening its own sources for long-term growth. The paper considers the basic theoretical and methodological problems in the formation of innovation component of the Russian regions’ economic security. We reveal the major essence and elements of the innovative component of the sustainable economic development of the region. The authors show that the formation of the innovative component of the region’s economic security demands the correlation of the strategy of regional innovation development and the production and technological type of territory. Additionally, this strategy should correlate with the desirable ways of production type transformation in the future, considering the trends of the world economy. We have highlighted the production and technological types of Russian regions as well as identified the features of relevant regional components for the innovation system of the Russian Federation to ensure sustainable development. The study defines the priority directions and goals for the development of economic security innovative component in the Russian regions. The authors’ calculations allowed to select a group of territorial subjects of the Russian Federation, which appear to be the most promising for the development of innovative activities for the elaboration of export-oriented high-tech industries

  1. Learning to fight a fly : developing citrus IPM in Bhutan

    NARCIS (Netherlands)

    Schoubroeck, van F.

    1999-01-01

    The chinese citrus fly is one of the key pests in Bhutanese mandarin orchards that lays eggs in developing fruit that cause pre-mature fruit drop. In this study it is used as a "model subject" to explore the integration of technical, social and administrative domains of knowledge. The

  2. Sustainable Development in Indian Automotive Component Clusters

    Science.gov (United States)

    Bhaskaran, E.

    2013-01-01

    India is the world's second fastest growing auto market and boasts of the sixth largest automobile industry after China, the US, Germany, Japan and Brazil. The Indian auto component industry recorded its highest year-on-year growth of 34.2 % in 2010-2011, raking in revenue of US 39.9 billion; major contribution coming from exports at US five billion and fresh investment from the US at around US two billion. For inclusive growth and sustainable development most of the auto components manufacturers has adopted the cluster development approach. The objective is to study the technical efficiency (θ), peer weights (λ i ), input slacks (S-) and output slacks (S+) of four Auto Component Clusters (ACC) in India. The methodology adopted is using Data Envelopment Analysis of Input Oriented Banker Charnes Cooper Model by taking number of units and number of employments as inputs and sales and exports in crores as an outputs. The non-zero λ i 's represents the weights for efficient clusters. The S > 0 obtained for one ACC reveals the excess no. of units (S-) and employment (S-) and shortage in sales (S+) and exports (S+). However the variable returns to scale are increasing for three clusters, constant for one more cluster and with nil decrease. To conclude, for inclusive growth and sustainable development, the inefficient ACC should increase their turnover and exports, as decrease in no. of enterprises and employment is practically not possible. Moreover for sustainable development, the ACC should strengthen infrastructure interrelationships, technology interrelationships, procurement interrelationships, production interrelationships and marketing interrelationships to increase productivity and efficiency to compete in the world market.

  3. Component development for X-band above 100 MW

    International Nuclear Information System (INIS)

    Fowkes, W.R.; Callin, R.S.; Studzinski, M.

    1991-05-01

    The requirement for some of the components described in this paper began with the Relativistic Klystron program done in collaboration with LLNL and LBL. This effort culminated in a klystron operating at 11.4 GHz delivering 330 MW into a pair of high-gradient accelerating structures. The electron beam for this klystron was formed in a 1 MeV induction linac at a very low duty cycle. The subsequent RF source development work at SLAC for the Next Linear Collider utilized some of these components, and required further and new development of others, work reliably at higher average power. 6 refs., 6 figs., 1 tab

  4. Components of Camp Experiences for Positive Youth Development

    Directory of Open Access Journals (Sweden)

    Karla A. Henderson

    2007-03-01

    Full Text Available Youth development specialists advocate that well designed, implemented, and staffed youth centered programs result in positive outcomes for young people. Youth organizations have provided opportunities for young people to participate in camping experiences for over a century. The purpose of this paper is to describe what program components were related to camp environments and positive youth development. We describe these program components related to positive youth development based on a large scale national study of ACA (American Camp Association accredited camps that included independent, religiously affiliated, government, and not-for-profit organizations. Based on the responses given by camp directors, contact and leadership from trained staff and the supportive relationships they provided were essential elements of camp. Other aspects leading to positive youth development in camps were program mission and structure along with elements of accountability, assessment of outcomes, and opportunities for skill building.

  5. Preparation and the in vitro evaluation of nanoemulsion system for the transdermal delivery of granisetron hydrochloride.

    Science.gov (United States)

    Zheng, Wen-wu; Zhao, Ling; Wei, Yu-meng; Ye, Yun; Xiao, Shun-han

    2010-08-01

    The objective of this study was to develop and evaluate nanoemulsion system for transdermal delivery of granisetron hydrochloride. Pseudo-ternary phase diagram was constructed to ascertain the concentration range of components of nanoemulsion composed of isopropyl myristate (IPM) as an oil phase, tween 85 as surfactant, ethanol as cosurfactant, water as aqueous phase. The effects of the content of IPM as an oil phase and n-methyl pyrrolidone (NMP) as transdermal enhancer on rat skin permeation of granisetron hydrochloride nanoemulsion were studied in vitro. The results showed that the mean particle size of nanoemulsion ranged from 50.4+/-1.5 to 82.4+/-0.9 nm with homogeneous size distribution. The resulted optimum formulation composed of 2.5% granisetron hydrochloride, 4% IPM, 40% tween 85/ethanol (1 : 1) and 10% NMP showed that the skin permeation rate was the highest (85.39+/-2.90 microg/cm(2)/h) and enhancement of drug permeability was 4.1-fold for transdermal delivery of granisetron hydrochloridein comparison with the control group (20% of tween 85 and 20% of ethanol micelle solution containing 2.5% of granisetron hydrochloride without IPM), and cumulative permeation amount was the highest (891.8+/-2.86 microg/cm(2)) with the shortest lag time (0.11+/-0.02 h) and was stable for at least 12 months. Therefore, the nanoemulsion system developed in this study offers a promising vehicle for the transdermal delivery system of granisetron hydrochloride, which may be as effective as oral or intravenous dosage forms and avoid some difficulties associated with these dosage forms.

  6. Plant protection and food safety: notes on cereal chain

    Directory of Open Access Journals (Sweden)

    Pasquale Trematerra

    Full Text Available Integrated Pest Management (or IPM is a decision-making process that prevents pest activity and infestation by combining several strategies to achieve long-term solutions. Components of an IPM program may include education, proper waste management, structural repair, maintenance, biological and mechanical control techniques, and pesticide application. These tactics should meet economic, public health and environmental goals. In this paper new methods and strategies of pest control in cereal chain are reported.

  7. Development of damage functions for high-rise building components

    International Nuclear Information System (INIS)

    Kustu, O.; Miller, D.D.; Brokken, S.T.

    1982-10-01

    The component approach for predicting the effects that ground motion from underground nuclear explosions will have on structures involves predicting the damage to each structural and nonstructural component of a building on the basis of the expected local deformation that most affects the damage to the component. This study was conducted to provide the basic data necessary to evaluate the component approach. Available published laboratory test data for various high-rise building components were collected. These data were analyzed statistically to determine damage threshold values and their variabilities, which in turn were used to derive component damage functions. The portion of construction costs attributable to various building components was determined statistically. This information was needed because component damage functions define damage as a percentage of the replacement values of the component, and, in order to calculate the overall building damage factor, the relative cost of each component must be estimated. The feasibility of the component approach to damage prediction is demonstrated. It is recommended that further experimental research directed towards developing an adequate data base of component damage thresholds for all significant building components should be encouraged. Parallel to this effort, detailed damage data from specific buildings damaged in earthquakes should be collected to verify the theoretical procedure

  8. European development of carbon armoured plasma facing components for ITER

    International Nuclear Information System (INIS)

    Merola, M.; Vieider, G.; Wu, C.; Schedler, B.; Chappuis, P.; Escourbiac, F.; Schlosser, J.; Duwe, R.; Roedig, M.; Febvre, M.; Grattarola, M.; Tahtinen, S.; Vesprini, R.

    2001-01-01

    After a brief description of the rationale of the material and geometry selection for each carbon armoured plasma facing components, this paper describes the European development of the two basic geometries, namely the monoblock and the flat tile. An overview of the non-destructive inspection techniques specifically developed for these components is also presented. (orig.)

  9. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin [Sungkyunkwan Univ., Seoul (Korea, Republic of); Kwon, J. D. [Yeungnam Univ., Gyeongsan (Korea, Republic of); Kang, K. J. [Chonnam National Univ., Gwangju (Korea, Republic of)] (and others)

    2001-03-15

    This research focuses on development of reliable life evaluation technology for nuclear power plant (NPP) components, and is divided into two parts, development of life evaluation systems for pressurized components and evaluation of applicability of emerging technology to operating plants. For the development of life evaluation system for nuclear pressure vessels, the following seven topics are covered: development of expert systems for integrity assessment of pressurized components, development of integrity evaluation systems of steam generator tubes, prediction of failure probability for NPP components based on probabilistic fracture mechanics, development of fatigue damage evaluation technique for plant life extension, domestic round robin analysis for pressurized thermal shock of reactor vessels, domestic round robin analysis of constructing P--T limit curves for reactor vessels, and development of data base for integrity assessment. For evaluation of applicability of emerging technology to operating plants, on the other hand, the following eight topics are covered: applicability of the Leak-Before-Break analysis to Cast S/S piping, collection of aged material tensile and toughness data for aged Cast S/S piping, finite element analyses for load carrying capacity of corroded pipes, development of Risk-based ISI methodology for nuclear piping, collection of toughness data for integrity assessment of bi-metallic joints, applicability of the Master curve concept to reactor vessel integrity assessment, measurement of dynamic fracture toughness, and provision of information related to regulation and plant life extension issues.

  10. Developing Reusable and Reconfigurable Real-Time Software using Aspects and Components

    OpenAIRE

    Tešanović, Aleksandra

    2006-01-01

    Our main focus in this thesis is on providing guidelines, methods, and tools for design, configuration, and analysis of configurable and reusable real-time software, developed using a combination of aspect-oriented and component-based software development. Specifically, we define a reconfigurable real-time component model (RTCOM) that describes how a real-time component, supporting aspects and enforcing information hiding, could efficiently be designed and implemented. In this context, we out...

  11. Development of EPICS channel access embedded ActiveX components for GUI development

    International Nuclear Information System (INIS)

    Roy, A.; Bhole, R.B.; Pal, S.

    2012-01-01

    The paper describes the integration of Experimental Physics and Industrial Control System (EPICS) Channel Access (CA) protocol and Microsoft ActiveX technology towards developing a generalize operator interface (OPI) building facility for Windows platform. EPICS is used as the development architecture of the control system in Superconducting Cyclotron (SCC). Considering the operators' familiarity and compatibility with third party software, it was decided to use MS-Windows platform at operator interface level in SCC during commission. Microsoft Visual Basic (VB) is used on trial basis as OPI building platform to incorporate user specific features e.g. file system access for data storage and analysis, user authentication at OPI level etc. A set of EPICS Channel Access embedded ActiveX components is developed to ease the programming complexity and reduce developmental time of the OPI for Windows platform. OPIs, developed using these components and containing hundreds of process parameters, are being used reliably over a considerable period of time. (author)

  12. High power RF transmission line component development

    International Nuclear Information System (INIS)

    Hong, B. G.; Hwang, C. K.; Bae, Y. D.; Yoon, J. S.; Wang, S. J.; Gu, S. H.; Yang, J. R.; Hahm, Y. S.; Oh, G. S.; Lee, J. R.; Lee, W. I.; Park, S. H.; Kang, M. S.; Oh, S. H.; Lee, W.I.

    1999-12-01

    We developed the liquid stub and phase shifter which are the key high RF power transmission line components. They show reliable operation characteristics and increased insulation capability, and reduced the size by using liquid (silicon oil, dielectric constant ε=2.72) instead of gas for insulating dielectric material. They do not have finger stock for the electric contact so the local temperature rise due to irregular contact and RF breakdown due to scratch in conductor are prevented. They can be utilized in broadcasting, radar facility which require high RF power transmission. Moreover, they are key components in RF heating system for fusion reactor. (author)

  13. High power RF transmission line component development

    Energy Technology Data Exchange (ETDEWEB)

    Hong, B. G.; Hwang, C. K.; Bae, Y. D.; Yoon, J. S.; Wang, S. J.; Gu, S. H.; Yang, J. R.; Hahm, Y. S.; Oh, G. S.; Lee, J. R.; Lee, W. I.; Park, S. H.; Kang, M. S.; Oh, S. H.; Lee, W.I

    1999-12-01

    We developed the liquid stub and phase shifter which are the key high RF power transmission line components. They show reliable operation characteristics and increased insulation capability, and reduced the size by using liquid (silicon oil, dielectric constant {epsilon}=2.72) instead of gas for insulating dielectric material. They do not have finger stock for the electric contact so the local temperature rise due to irregular contact and RF breakdown due to scratch in conductor are prevented. They can be utilized in broadcasting, radar facility which require high RF power transmission. Moreover, they are key components in RF heating system for fusion reactor. (author)

  14. The Methodological Background for Harmonizing Components of Sustainable Development of an Industrial City

    Directory of Open Access Journals (Sweden)

    Prushkivskyj Volodymyr G.

    2016-11-01

    Full Text Available The aim of the article is to develop a methodological background for harmonizing components of sustainable development of an industrial city. The ways of harmonization of economic, environmental and social components are studied. It is proposed to use the rule of «golden ratio» to determine the «ideal» values of the components of sustainable development. On the basis of the index method the components of sustainable development are evaluated. The comparative analysis of the actual and harmonic distribution between the sub-indices of sustainable development is performed. Based on the rule of «golden ratio» it is proved that the harmonization allows to state the existence of differences as well as to carry out a quantitative analysis. It is justified that the existence of disharmony between the components of sustainable development requires elaboration of an appropriate mechanism on the basis of redistribution of investment resources as well as other economic instruments to support the components at a certain level.

  15. Reusing balanced power flow object components for developing harmonic power flow

    Energy Technology Data Exchange (ETDEWEB)

    Nadarajah, S. [Peninsular Malaysia Electric Utility Co., Kuala Lumpur (Malaysia). Tenaga Nasional Berhad; Nor, K.M.; Abdel-Akher, M. [Malaysia Univ., Kuala Lumpur (Malaysia). Dept. of Electrical Engineering

    2005-07-01

    Harmonic power flows are used to examine the effects of nonlinear loads on power systems. In this paper, component technology was re-used for the development of a harmonic power flow. The object-oriented power system model (OO-PSM) was developed separately from a solution algorithm. Nodes, lines, and transformers were modelled as entity objects by classes. Power flow solution algorithms were modelled as control objects and encapsulated inside independent software components within the power system component software architecture (PS-COM). Both the OO-PSM and the PS-COM of the balanced power flow were re-used for developing the proposed harmonic power flow. A no-interaction hypothesis was used to consider both fundamental voltages and nonlinear device data dependence. A direct solution voltage node method was also used. The accuracy of the method was demonstrated using IEEE 14 bus and 30 bus test systems. It was concluded that component technology can be used to develop harmonic power flow programs. 7 refs., 2 tabs., 9 figs.

  16. Valuing Professional Development Components for Emerging Undergraduate Researchers

    Science.gov (United States)

    Cheung, I.

    2015-12-01

    In 2004 the Hatfield Marine Science Center (HMSC) at Oregon State University (OSU) established a Research Experience for Undergraduates (REU) program to engage undergraduate students in hands-on research training in the marine sciences. The program offers students the opportunity to conduct research focused on biological and ecological topics, chemical and physical oceanography, marine geology, and atmospheric science. In partnership with state and federal government agencies, this ten-week summer program has grown to include 20+ students annually. Participants obtain a background in the academic discipline, professional development training, and research experience to make informed decisions about careers and advanced degrees in marine and earth system sciences. Professional development components of the program are designed to support students in their research experience, explore career goals and develop skills necessary to becoming a successful young marine scientist. These components generally include seminars, discussions, workshops, lab tours, and standards of conduct. These componentscontribute to achieving the following professional development objectives for the overall success of new emerging undergraduate researchers: Forming a fellowship of undergraduate students pursuing marine research Stimulating student interest and understanding of marine research science Learning about research opportunities at Oregon State University "Cross-Training" - broadening the hands-on research experience Exploring and learning about marine science careers and pathways Developing science communication and presentation skills Cultivating a sense of belonging in the sciences Exposure to federal and state agencies in marine and estuarine science Academic and career planning Retention of talented students in the marine science Standards of conduct in science Details of this program's components, objectives and best practices will be discussed.

  17. Test Driven Development of a Parameterized Ice Sheet Component

    Science.gov (United States)

    Clune, T.

    2011-12-01

    Test driven development (TDD) is a software development methodology that offers many advantages over traditional approaches including reduced development and maintenance costs, improved reliability, and superior design quality. Although TDD is widely accepted in many software communities, the suitability to scientific software is largely undemonstrated and warrants a degree of skepticism. Indeed, numerical algorithms pose several challenges to unit testing in general, and TDD in particular. Among these challenges are the need to have simple, non-redundant closed-form expressions to compare against the results obtained from the implementation as well as realistic error estimates. The necessity for serial and parallel performance raises additional concerns for many scientific applicaitons. In previous work I demonstrated that TDD performed well for the development of a relatively simple numerical model that simulates the growth of snowflakes, but the results were anecdotal and of limited relevance to far more complex software components typical of climate models. This investigation has now been extended by successfully applying TDD to the implementation of a substantial portion of a new parameterized ice sheet component within a full climate model. After a brief introduction to TDD, I will present techniques that address some of the obstacles encountered with numerical algorithms. I will conclude with some quantitative and qualitative comparisons against climate components developed in a more traditional manner.

  18. Qualification of Indigenously Developed Special Coatings for Aero-Engine Components

    OpenAIRE

    V. Sambasiva Rao; T. Rangaraju; V. Unnikrishnan

    1999-01-01

    The demand for higher performance and reliability of aero-engiaes necessitates its components to worksatisfactorily under severe operating conditions. The durability of various components in these environmentis often enhanced by applying suitable coatings. The development of new materials/processing methods andalso various coatings to protect the components have been driven by the ever-increasing severity of theaero-engine internal environment. While the selection of a coating is dictated by ...

  19. Developing a Toolset Supporting the Construction of Reusable Components for Embedded Control Systems

    DEFF Research Database (Denmark)

    Guan, Wei; Sierszecki, Krzysztof; Angelov, Christo K.

    2010-01-01

    Reusing software components for embedded control applications enhances product quality and reduces time to market when appropriate (formal) methodologies and supporting toolsets are available. That is why industrial companies are interested in developing trusted, in-house reusable components for ...... on open-source technology, in accordance with industrial requirements, as well as the approach used to engineer a toolset supporting component development for embedded control applications.......Reusing software components for embedded control applications enhances product quality and reduces time to market when appropriate (formal) methodologies and supporting toolsets are available. That is why industrial companies are interested in developing trusted, in-house reusable components...

  20. Reactor component chemical decontamination-developments in waste handling and disposal

    International Nuclear Information System (INIS)

    Papesch, R.; Atwood, K.L.

    1989-01-01

    Because of restrictive limits on man-rem exposure in European nuclear plants, a company has developed and applied a number of chemical decontamination techniques for components that must be periodically maintained. These techniques are particularly effective for components that can be placed in a decontamination bath for dose reduction prior to performing maintenance. The cleaning technique has the ability to achieve decontamination factors of at least 20 and in some cases much greater. For components with before cleaning dose rates of between 1 to as high as 80 R/hr, significant man-rem reductions are achieved when hundreds of manhours may be required to complete required component maintenance. Transferring this solvent technology to the U.S. required a program to develop solidification formulas to allow the solvent wastes to be disposed of in accordance with regulations and in a cost effective manner. This paper demonstrates in chemical decontaminations with small liquid volume systems that concentrated decontamination solvents can be employed to achieve high decontamination factors

  1. Hydrogen-bromine fuel cell advance component development

    Science.gov (United States)

    Charleston, Joann; Reed, James

    1988-01-01

    Advanced cell component development is performed by NASA Lewis to achieve improved performance and longer life for the hydrogen-bromine fuel cells system. The state-of-the-art hydrogen-bromine system utilizes the solid polymer electrolyte (SPE) technology, similar to the SPE technology developed for the hydrogen-oxygen fuel cell system. These studies are directed at exploring the potential for this system by assessing and evaluating various types of materials for cell parts and electrode materials for Bromine-hydrogen bromine environment and fabricating experimental membrane/electrode-catalysts by chemical deposition.

  2. Management of Globally Distributed Component-Based Software Development Projects

    NARCIS (Netherlands)

    J. Kotlarsky (Julia)

    2005-01-01

    textabstractGlobally Distributed Component-Based Development (GD CBD) is expected to become a promising area, as increasing numbers of companies are setting up software development in a globally distributed environment and at the same time are adopting CBD methodologies. Being an emerging area, the

  3. Design, construction and tuning of S-band coupler for electron linear accelerator of institute for research in fundamental sciences (IPM E-linac)

    International Nuclear Information System (INIS)

    Ghasemi, F.; Abbasi Davani, F.; Lamehi Rachti, M.; Shaker, H.; Ahmadiannamin, S.

    2015-01-01

    Design and construction of an electron linear accelerator by Institute for Research in Fundamental Science (IPM) is considered as Iran’s first attempt to construct such an accelerator. In order to design a linear accelerating tube, after defining the accelerating tube and buncher geometries, RF input and output couplers must be designed. In this article, firstly, a brief report on the specifications of an S-band electron linear accelerator which is in progress in the school of particles and accelerators is presented and then, the design process and construction reports of the couplers required for this accelerator are described. Through performing necessary calculations and tuning the coupling factor and resonant frequency, couplers with desired specification have been fabricated by shrinking method. The final obtained coupling factor and resonant frequency have been respectively 1.05 and 2997 MHz for the first coupler, and 0.98 and 2996.9 MHz for the second one that are close to calculation results

  4. Artificial heart thermal converter component research and development

    International Nuclear Information System (INIS)

    Goldowsky, M.; Lehrfeld, D.

    1977-01-01

    Under U.S. ERDA contract, a radioisotope powered artificial heart system to be used as a replacement for the diseased natural heart is under development by the Westinghouse Advanced Energy Systems Division and Philips Laboratories. A portion of the program activity is in research and development of components for the Stirling cycle thermal converter. Developments in current areas of thermal converter R and D investigation are discussed, including the control system, lubrication system, magnetic shaft coupling, rotary seals, and materials joining

  5. Development of a model forecasting Dermanyssus gallinae's population dynamics for advancing Integrated Pest Management in laying hen facilities

    NARCIS (Netherlands)

    Mul, Monique F.; Riel, van Johannes; Roy, Lise; Zoons, Johan; Andre, Geert; George, David R.; Meerburg, Bastiaan G.; Dicke, Marcel; Mourik, van Simon; Groot Koerkamp, Peter W.G.

    2017-01-01

    The poultry red mite, Dermanyssus gallinae, is the most significant pest of egg laying hens in many parts of the world. Control of D. gallinae could be greatly improved with advanced Integrated Pest Management (IPM) for D. gallinae in laying hen facilities. The development of a model forecasting

  6. Integrated Procurement Management System, Version II

    Science.gov (United States)

    Collier, L. J.

    1985-01-01

    Integrated Procurement Management System, Version II (IPMS II) is online/ batch system for collecting developing, managing and disseminating procurementrelated data at NASA Johnson Space Center. Portions of IPMS II adaptable to other procurement situations.

  7. Utilization of Durability Criterion to Develop Automotive Components

    DEFF Research Database (Denmark)

    Ricardo, Luiz Carlos Hernandes

    2010-01-01

    Today the automotive companies must reduce the time to development of new products with improvement in performance, durability and low cost reductions where possible. To achieve this goal the carmakers need to improve the design criterion of car systems like body, chassis and suspension component...

  8. Developing Senior Leaders for the Reserve Components

    Science.gov (United States)

    2017-01-01

    expectation other than rudimentary dialogues on career paths. Some senior leaders are superb mentors , but this appears to be a result of the personality... mentoring discussions, as well as resources and senior -level attention to these expectations, could complement individual development plans and structured...including senior leaders. This extends to the reserve components (RC) and their “critical bridge to the civilian population, infusing the Joint

  9. Development of x-ray laser architectural components

    International Nuclear Information System (INIS)

    Wan, A.S.; Da Silva, L.B.; Moreno, J.C.

    1994-06-01

    This paper describes the recent experimental and computational development of short-pulse, enhanced-coherence, and high-brilliance x-ray lasers (XRLs). The authors will describe the development of an XRL cavity by injecting laser photons back into an amplifying XRL plasma. Using a combination of LASNEX/GLF/SPECTRE-BEAM3 codes, they obtained good agreement with experimental results. They will describe the adaptive spatial filtering technique used to design small-aperture shaped XRLs with near diffraction-limited output. Finally they will discuss issues concerning the development of high-brilliance XRL architecture, with emphasis on scaling the XRL aperture. Combining these advances in XRL architectural components allows them to develop a short-pulse, high-brilliance, coherent XRL suitable for applications in areas such as biological holography, plasma interferometry, and nonlinear optics

  10. Development of the Sixty Watt Heat-Source hardware components

    International Nuclear Information System (INIS)

    McNeil, D.C.; Wyder, W.C.

    1995-01-01

    The Sixty Watt Heat Source is a nonvented heat source designed to provide 60 thermal watts of power. The unit incorporates a plutonium-238 fuel pellet encapsulated in a hot isostatically pressed General Purpose Heat Source (GPHS) iridium clad vent set. A molybdenum liner sleeve and support components isolate the fueled iridium clad from the T-111 strength member. This strength member serves as the pressure vessel and fulfills the impact and hydrostatic strength requirements. The shell is manufactured from Hastelloy S which prevents the internal components from being oxidized. Conventional drawing operations were used to simplify processing and utilize existing equipment. The deep drawing reqirements for the molybdenum, T-111, and Hastelloy S were developed from past heat source hardware fabrication experiences. This resulted in multiple step drawing processes with intermediate heat treatments between forming steps. The molybdenum processing included warm forming operations. This paper describes the fabrication of these components and the multiple draw tooling developed to produce hardware to the desired specifications. copyright 1995 American Institute of Physics

  11. Chemical ecology of moths: Role of semiochemicals in host location by Ectomyelois ceratoniae and mate guarding by Heliothis virescens

    OpenAIRE

    Hosseini, S.A.

    2017-01-01

    Semiochemical-based behavioral manipulation has been increasingly implemented in Integrated Pest Management (IPM) as an environmentally friendly strategy. For many pest species, however, efficient methods have yet to be developed. An efficient sex pheromone attractant is missing in management of the carob moth, Ectomyelois ceratoniae, a devastating fruit pest, because the major pheromone component is unstable. To explore the use of host-plant volatiles to attract carob moths, the pomegranate-...

  12. Application of Interval Predictor Models to Space Radiation Shielding

    Science.gov (United States)

    Crespo, Luis G.; Kenny, Sean P.; Giesy,Daniel P.; Norman, Ryan B.; Blattnig, Steve R.

    2016-01-01

    This paper develops techniques for predicting the uncertainty range of an output variable given input-output data. These models are called Interval Predictor Models (IPM) because they yield an interval valued function of the input. This paper develops IPMs having a radial basis structure. This structure enables the formal description of (i) the uncertainty in the models parameters, (ii) the predicted output interval, and (iii) the probability that a future observation would fall in such an interval. In contrast to other metamodeling techniques, this probabilistic certi cate of correctness does not require making any assumptions on the structure of the mechanism from which data are drawn. Optimization-based strategies for calculating IPMs having minimal spread while containing all the data are developed. Constraints for bounding the minimum interval spread over the continuum of inputs, regulating the IPMs variation/oscillation, and centering its spread about a target point, are used to prevent data over tting. Furthermore, we develop an approach for using expert opinion during extrapolation. This metamodeling technique is illustrated using a radiation shielding application for space exploration. In this application, we use IPMs to describe the error incurred in predicting the ux of particles resulting from the interaction between a high-energy incident beam and a target.

  13. Development and test of prototype components for ITER

    International Nuclear Information System (INIS)

    Biel, Wolfgang; Behr, Wilfried; Castano-Bardawil, David

    2015-08-01

    The scientific program of the project is divided into the following partial projects: (1.) ITER Diagnostic Port Plug for the charge-exchange spectroscopy (CXRS) with the subthemes: (a) Development of prototypes for critical mechanical components, (b) development of a roboter for the laser welding of vacuum seals and pipings at the Port Plug, (c) mirror studies, (d) CXRS prototype spectrometer, (2.) ITER tritium retention diagnostics (TR), (3.) ITER disruption mitigation ventile (DMV).

  14. Formalization in Component Based Development

    DEFF Research Database (Denmark)

    Holmegaard, Jens Peter; Knudsen, John; Makowski, Piotr

    2006-01-01

    We present a unifying conceptual framework for components, component interfaces, contracts and composition of components by focusing on the collection of properties or qualities that they must share. A specific property, such as signature, functionality behaviour or timing is an aspect. Each aspect...... may be specified in a formal language convenient for its purpose and, in principle, unrelated to languages for other aspects. Each aspect forms its own semantic domain, although a semantic domain may be parameterized by values derived from other aspects. The proposed conceptual framework is introduced...

  15. Industrial Process Monitoring in the Big Data/Industry 4.0 Era: from Detection, to Diagnosis, to Prognosis

    Directory of Open Access Journals (Sweden)

    Marco S. Reis

    2017-06-01

    Full Text Available We provide a critical outlook of the evolution of Industrial Process Monitoring (IPM since its introduction almost 100 years ago. Several evolution trends that have been structuring IPM developments over this extended period of time are briefly referred, with more focus on data-driven approaches. We also argue that, besides such trends, the research focus has also evolved. The initial period was centred on optimizing IPM detection performance. More recently, root cause analysis and diagnosis gained importance and a variety of approaches were proposed to expand IPM with this new and important monitoring dimension. We believe that, in the future, the emphasis will be to bring yet another dimension to IPM: prognosis. Some perspectives are put forward in this regard, including the strong interplay of the Process and Maintenance departments, hitherto managed as separated silos.

  16. DEVELOPMENT OF METHODOLOGY FOR DESIGNING TESTABLE COMPONENT STRUCTURE OF DISCIPLINARY COMPETENCE

    Directory of Open Access Journals (Sweden)

    Vladimir I. Freyman

    2014-01-01

    Full Text Available The aim of the study is to present new methods of quality results assessment of the education corresponding to requirements of Federal State Educational Standards (FSES of the Third Generation developed for the higher school. The urgency of search of adequate tools for quality competency measurement and its elements formed in the course of experts’ preparation are specified. Methods. It is necessary to consider interference of competency components such as knowledge, abilities, possession in order to make procedures of assessment of students’ achievements within the limits of separate discipline or curriculum section more convenient, effective and exact. While modeling of component structure of the disciplinary competence the testable design of components is used; the approach borrowed from technical diagnostics. Results. The research outcomes include the definition and analysis of general iterative methodology for testable designing component structure of the disciplinary competence. Application of the proposed methodology is illustrated as the example of an abstract academic discipline with specified data and index of labour requirement. Methodology restrictions are noted; practical recommendations are given. Scientific novelty. Basic data and a detailed step-by-step implementation phase of the proposed common iterative approach to the development of disciplinary competence testable component structure are considered. Tests and diagnostic tables for different options of designing are proposed. Practical significance. The research findings can help promoting learning efficiency increase, a choice of adequate control devices, accuracy of assessment, and also efficient use of personnel, temporal and material resources of higher education institutions. Proposed algorithms, methods and approaches to procedure of control results organization and realization of developed competences and its components can be used as methodical base while

  17. EU Development of High Heat Flux Components

    International Nuclear Information System (INIS)

    Linke, J.; Lorenzetto, P.; Majerus, P.; Merola, M.; Pitzer, D.; Roedig, M.

    2005-01-01

    The development of plasma facing components for next step fusion devices in Europe is strongly focused to ITER. Here a wide spectrum of different design options for the divertor target and the first wall have been investigated with tungsten, CFC, and beryllium armor. Electron beam simulation experiments have been used to determine the performance of high heat flux components under ITER specific thermal loads. Beside thermal fatigue loads with power density levels up to 20 MWm -2 , off-normal events are a serious concern for the lifetime of plasma facing components. These phenomena are expected to occur on a time scale of a few milliseconds (plasma disruptions) or several hundred milliseconds (vertical displacement events) and have been identified as a major source for the production of neutron activated metallic or tritium enriched carbon dust which is of serious importance from a safety point of view.The irradiation induced material degradation is another critical concern for future D-T-burning fusion devices. In ITER the integrated neutron fluence to the first wall and the divertor armour will remain in the order of 1 dpa and 0.7 dpa, respectively. This value is low compared to future commercial fusion reactors; nevertheless, a nonnegligible degradation of the materials has been detected, both for mechanical and thermal properties, in particular for the thermal conductivity of carbon based materials. Beside the degradation of individual material properties, the high heat flux performance of actively cooled plasma facing components has been investigated under ITER specific thermal and neutron loads

  18. Quaternary IPM (integrated pest management)--concept for the control of powdery mildew in sugar beets.

    Science.gov (United States)

    Wolf, P F J; Verreet, A

    2008-01-01

    Powdery mildew, caused by Erysiphe betae (Vanha) Weltzien, may be assumed as an important leaf disease in sugar beet growing areas of central Europe. Although the causal agent is mainly adapted to arid climatic zones, the disease is appearing every year, where the extent of infection is mainly dependent on weather conditions and susceptibility of cultivar. The losses caused by powdery mildew seldom exceed 10% of sugar yield; moreover, losses are likely only under the condition that the epidemic onset occurs before end-August. Nevertheless, the epidemic onset varies in a wide range, as there are years with high incidence followed by growing periods without severe infection. Therefore, in order to have a flexible control of the disease, where the use of fungicides could be minimised to an essential amount, a quaternary IPM (Integrated Pest Management) -concept was developed. The development is based on epidemiological field studies (Germany, 1993-2004, n = 76) of sugar beet leaf diseases under variation of year, site and cultivar. Efficacy of fungicide treatment timing was assessed in relation to the epidemic development. Comparison of treatments comprised fungicide sprays carried out from disease initiation till later stages of the epidemic. Additionally, the assessments were performed in relation to an untreated and a healthy control--the latter was three times treated according to a treatment regime with three to four week intervals. The effect of different application timings was measured by the potential of disease and yield loss control. The quaternary concept combines the advantages of four elements in order to compensate the constraints of the single tools: The period without disease risk is determined by a so-called negative-prognosis (i). First symptoms appear in the period from mid-July till the beginning of September. If disease initiation cannot be excluded, field observations by a sample of 100 leaves are advised. The disease scores enable the appliance

  19. Design and development of R.F. LINAC accelerator components

    International Nuclear Information System (INIS)

    Abhay Kumar; Guha, S.; Balasubramaniam, R.; Jawale, S.B.

    2003-01-01

    Full text: Radio frequency linear accelerator, a high power electron LINAC technology, is being developed at BARC. These accelerators are considered to be the most compact and effective for a given power capacity. Important application areas of this LINAC include medical sterilization, food preservation, pollution control, semiconductor industries, radiation therapy and material science. Center for Design and Manufacture (CDM), BARC has been entrusted with the design, development and manufacturing of various mechanical components of the accelerator. Most critical and precision components out of them are Diagnostic chamber, Faraday cup, Drift tube and R.F. cavities. This paper deals with the design aspects in respect of Ultra high vacuum compatibility and the mechanism of operation. Also this paper discusses the state-of-art technology for machining of intricate contour using specially designed poly crystalline diamond tool and the inspection methodology developed to minimize the measurement errors on the machined contour. Silver brazing technique employed to join the LINAC cavities is also described in detail

  20. Development of the Inspection and Diagnosis Technology for the NSSS Components Integrity

    International Nuclear Information System (INIS)

    Kim, Jae Hee; Eom, Heung Soup; Lee, Jae Cheol

    2007-02-01

    This project is to develop and demonstrate new technologies for a monitoring, inspection, diagnosis and evaluation of the safety related components in nuclear power plants. These technologies are required to detect the defects in the components of nuclear power plants and to prepare thoroughly against accidents. We studied on the four issues recently focused. Thus we developed an impact analysis model of the reactor and steam generator, and diagnosis software of the reactor internals. As an on-line monitoring technology using an ultrasonic guided wave, we developed a new method enhancing the S/N ratio of the weak signal based on time reversal technique. A network based remote inspection system and an inspection robot for reactor vessel head penetration was developed. We also performed a lifetime estimation and degradation analysis of the NPP cables through accelerated degradation tests. The technologies developed in this project are applied to the components of nuclear power plants. The applications include a localization of the NSSS integrity monitoring system, replacement of an in-service inspection by on-line monitoring, remote inspection of the major components of the plants, lifetime estimation of the degraded plant cables, and so on

  1. Development of the Inspection and Diagnosis Technology for the NSSS Components Integrity

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Hee; Eom, Heung Soup; Lee, Jae Cheol (and others)

    2007-02-15

    This project is to develop and demonstrate new technologies for a monitoring, inspection, diagnosis and evaluation of the safety related components in nuclear power plants. These technologies are required to detect the defects in the components of nuclear power plants and to prepare thoroughly against accidents. We studied on the four issues recently focused. Thus we developed an impact analysis model of the reactor and steam generator, and diagnosis software of the reactor internals. As an on-line monitoring technology using an ultrasonic guided wave, we developed a new method enhancing the S/N ratio of the weak signal based on time reversal technique. A network based remote inspection system and an inspection robot for reactor vessel head penetration was developed. We also performed a lifetime estimation and degradation analysis of the NPP cables through accelerated degradation tests. The technologies developed in this project are applied to the components of nuclear power plants. The applications include a localization of the NSSS integrity monitoring system, replacement of an in-service inspection by on-line monitoring, remote inspection of the major components of the plants, lifetime estimation of the degraded plant cables, and so on.

  2. Effectiveness of an integrated pest management intervention in controlling cockroaches, mice, and allergens in New York City public housing.

    Science.gov (United States)

    Kass, Daniel; McKelvey, Wendy; Carlton, Elizabeth; Hernandez, Marta; Chew, Ginger; Nagle, Sean; Garfinkel, Robin; Clarke, Brian; Tiven, Julius; Espino, Christian; Evans, David

    2009-08-01

    Cockroaches and mice, which are common in urban homes, are sources of allergens capable of triggering asthma symptoms. Traditional pest control involves the use of scheduled applications of pesticides by professionals as well as pesticide use by residents. In contrast, integrated pest management (IPM) involves sanitation, building maintenance, and limited use of least toxic pesticides. We implemented and evaluated IPM compared with traditional practice for its impact on pests, allergens, pesticide use, and resident satisfaction in a large urban public housing authority. We assigned IPM or control status to 13 buildings in five housing developments, and evaluated conditions at baseline, 3 months, and 6 months in 280 apartments in Brooklyn and Manhattan, in New York City (New York). We measured cockroach and mouse populations, collected cockroach and mouse urinary protein allergens in dust, and interviewed residents. All statistical models controlled for baseline levels of pests or allergens. Compared with controls, apartments receiving IPM had significantly lower counts of cockroaches at 3 months and greater success in reducing or sustaining low counts of cockroaches at both 3 and 6 months. IPM was associated with lower cockroach allergen levels in kitchens at 3 months and in beds and kitchens at 6 months. Pesticide use was reduced in IPM relative to control apartments. Residents of IPM apartments also rated building services more positively. In contrast to previous IPM studies, which involved extensive cleaning, repeat visits, and often extensive resident education, we found that an easily replicable single IPM visit was more effective than the regular application of pesticides alone in managing pests and their consequences.

  3. Development status of component reliability database for Korean NPPs and a case study

    International Nuclear Information System (INIS)

    Choi, S. Y.; Yang, S. H.; Lee, S. C.; Kim, S. H.; Han, S. H.

    1999-01-01

    We have applied a generic database to the PSA (Probabilistic Safety Assessment) for the Korean Standard NPPs (Nuclear Power Plant) since there is no specific component reliability database. However generic data is not enough to reflect the specific characteristics of domestic plants since it is collected by foreign plants. Therefore we are developing the plant-specific component reliability database for domestic NPPs. In this paper, we describe the development status of the component reliability database and the approach method of data collection and component failure analysis. We also summarize a case study of component failure analysis. We first collect the failure and repair data from the TR (Trouble Report) electronic database and the daily operation report sheet. Now we add a data collection method that checks the original TR sheet to improve the data quality. We input the component failure and repair data of principal components of about 30 systems into the component reliability database. Now, we are analyzing the component failure data of 11 safety systems among the systems to calculate component failure rate and unavailability etc

  4. Development of active-X component for use in web based thermal hydraulic data bank

    International Nuclear Information System (INIS)

    Lee, Y. J.; Chung, B. D.

    2003-01-01

    An active-X component to use as the engine for the web-based thermal hydraulic data bank has been developed. The development of the active-X component was carried out primarily for employment in the web-based thermal-hydraulic databank. The active-X component was developed with the objective to minimize the size of the component and the data traffic while maximizing the functionality. For this end, the data is downloaded in a compressed format to minimize the downloading time, and Delphi language is used in the efforts to minimize the size of the active-X component as well as for fast execution time. The functionality of active-X component was tested on ENCOUNTER data package by embedding the component in a prototype web-page under a server-client environment. The test demonstrated that the active-X component functions as intended and that it is capable of very easy data retrieval and display

  5. High-temperature-structural design and research and development for reactor system components

    International Nuclear Information System (INIS)

    Matsumura, Makoto; Hada, Mikio

    1985-01-01

    The design of reactor system components requires high-temperature-structural design guide with the consideration of the creep effect of materials related to research and development on structural design. The high-temperature-structural design guideline for the fast prototype reactor MONJU has been developed under the active leadership by Power Reactor and Nuclear Fuel Development Corporation and Toshiba has actively participated to this work with responsibility on in-vessel components, performing research and development programs. This paper reports the current status of high-temperature-structural-design-oriented research and development programs and development of analytical system including stress-evaluation program. (author)

  6. Component Development to Accelerate Commercial Implementation of Ultra-Low Emissions Catalytic Combustion

    Energy Technology Data Exchange (ETDEWEB)

    McCarty, Jon; Berry, Brian; Lundberg, Kare; Anson, Orris

    2003-03-31

    This final report describes a 2000-2003 program for the development of components and processes to enhance the commercialization of ultra-low emissions catalytic combustion in industrial gas turbines. The range of project tasks includes: development of more durable, lower-cost catalysts and catalytic combustor components; development and design of a catalytic pre-burner and a catalytic pilot burner for gas turbines, and on-site fuel conversion processing for utilization of liquid fuel.

  7. Demonstration of an Integrated Pest Management Program for Wheat in Tajikistan

    Science.gov (United States)

    Landis, Douglas A.; Saidov, Nurali; Jaliov, Anvar; El Bouhssini, Mustapha; Kennelly, Megan; Bahlai, Christie; Landis, Joy N.; Maredia, Karim

    2016-01-01

    Wheat is an important food security crop in central Asia but frequently suffers severe damage and yield losses from insect pests, pathogens, and weeds. With funding from the United States Agency for International Development, a team of scientists from three U.S. land-grant universities in collaboration with the International Center for Agricultural Research in Dry Areas and local institutions implemented an integrated pest management (IPM) demonstration program in three regions of Tajikistan from 2011 to 2014. An IPM package was developed and demonstrated in farmer fields using a combination of crop and pest management techniques including cultural practices, host plant resistance, biological control, and chemical approaches. The results from four years of demonstration/research indicated that the IPM package plots almost universally had lower pest abundance and damage and higher yields and were more profitable than the farmer practice plots. Wheat stripe rust infestation ranged from 30% to over 80% in farmer practice plots, while generally remaining below 10% in the IPM package plots. Overall yield varied among sites and years but was always at least 30% to as much as 69% greater in IPM package plots. More than 1,500 local farmers—40% women—were trained through farmer field schools and field days held at the IPM demonstration sites. In addition, students from local agricultural universities participated in on-site data collection. The IPM information generated by the project was widely disseminated to stakeholders through peer-reviewed scientific publications, bulletins and pamphlets in local languages, and via Tajik national television. PMID:28446990

  8. Relação entre disponibilidade hídrica e produtividade do eucalipto em diferentes idades, em Guanhães, Minas Gerais Relationship between water availability and eucalyptus productivity at different ages in Guanhães region, Minas Gerais state

    Directory of Open Access Journals (Sweden)

    Maria J. H. de Souza

    2006-09-01

    Full Text Available Para realização deste trabalho, estudou-se a produtividade de povoamentos de eucalipto e a disponibilidade hídrica do solo na região de Guanhães, Minas Gerais. Para tal, avaliaram-se as precipitações ocorridas nas estações chuvosas (PEC, os componentes do balanço hídrico, os índices anuais de aridez (Ia, hídrico (Ih e de umidade (Im do solo e o incremento periódico mensal (IPM, médio anual, durante o período de 1985 a 1998. A produtividade de madeira foi influenciada pela PEC, em que os menores valores de IPM foram observados nos anos precedidos de estação chuvosa seca ou muito seca, e os maiores nos anos precedidos de estação chuvosa, classificada como chuvosa ou muito chuvosa. Para os períodos de aumento e de diminuição na PEC verificou-se correlação com o IPM, obtendo-se um R² acima de 0,80. Para o aumento e redução de 100 mm, na PEC o IPM aumentou 0,51 m³ ha-1 mês-1, e reduziu 0,80 m³ ha-1 mês-1, respectivamente. Salvo algumas exceções, valores superiores de IPM foram constatados nos anos posteriores aos anos com Im e Ih mais elevados e nos anos precedidos por Im negativo, constatou-se redução no IPM, o qual, no entanto, foi superior para a faixa etária de 3 a 5 que para a de 5 a 7 anos e o índice de local médio foi de 28,90.A study concerning the productivity of eucalyptus and the soil water availability was carried out in Guanhães region, Minas Gerais State, Brazil. Evaluations were accomplished for precipitation events occurring over the rainy seasons (PEC, water balance components, annual indices for aridity (Ia, hydric (Ih and moisture (Im, as well as the monthly periodic increment (IPM, annual average, over the period from 1985 to 1998. The wood productivity was affected by PEC, and the lowest IPM values were observed in the years preceded by either dry rainy season or very dry rainy season, whereas the highest IPM values were observed in those years preceded by rainy season classified as rainy

  9. Priority of VHS Development Based in Potential Area using Principal Component Analysis

    Science.gov (United States)

    Meirawan, D.; Ana, A.; Saripudin, S.

    2018-02-01

    The current condition of VHS is still inadequate in quality, quantity and relevance. The purpose of this research is to analyse the development of VHS based on the development of regional potential by using principal component analysis (PCA) in Bandung, Indonesia. This study used descriptive qualitative data analysis using the principle of secondary data reduction component. The method used is Principal Component Analysis (PCA) analysis with Minitab Statistics Software tool. The results of this study indicate the value of the lowest requirement is a priority of the construction of development VHS with a program of majors in accordance with the development of regional potential. Based on the PCA score found that the main priority in the development of VHS in Bandung is in Saguling, which has the lowest PCA value of 416.92 in area 1, Cihampelas with the lowest PCA value in region 2 and Padalarang with the lowest PCA value.

  10. Mechanical development for reliable reactor components

    International Nuclear Information System (INIS)

    Ross-Ross, P.A.; Metcalfe, R.

    1983-09-01

    The CANDU reactor has achieved worldwide distinction because of its reliable performance. To achieve this, special attention was given to the reliability and maintainability of components in the heavy water circuits. Development programs were initiated early in the history of the CANDU reactor to improve the effectiveness of pump seals, valves, and static seals because of unacceptable performance of the commercial equipment then available. As a result, pump seals with a five year life now appear achievable, and valves and static seals are no longer a significant concern in CANDU reactors. Increasing effort is being given remotely operated tools and fabrication systems for radioactive environments

  11. Advanced diesel engine component development program, tasks 4-14

    Science.gov (United States)

    Kaushal, Tony S.; Weber, Karen E.

    1994-01-01

    This report summarizes the Advanced Diesel Engine Component Development (ADECD) Program to develop and demonstrate critical technology needed to advance the heavy-duty low heat rejection engine concept. Major development activities reported are the design, analysis, and fabrication of monolithic ceramic components; vapor phase and solid film lubrication; electrohydraulic valve actuation; and high pressure common rail injection. An advanced single cylinder test bed was fabricated as a laboratory tool in studying these advanced technologies. This test bed simulates the reciprocator for a system having no cooling system, turbo compounding, Rankine bottoming cycle, common rail injection, and variable valve actuation to achieve fuel consumption of 160 g/kW-hr (.26 lb/hp-hr). The advanced concepts were successfully integrated into the test engine. All ceramic components met their functional and reliability requirements. The firedeck, cast-in-place ports, valves, valve guides, piston cap, and piston ring were made from silicon nitride. Breakthroughs required to implement a 'ceramic' engine included the fabrication of air-gap cylinder heads, elimination of compression gaskets, machining of ceramic valve seats within the ceramic firedeck, fabrication of cast-in-place ceramic port liners, implementation of vapor phase lubrication, and elimination of the engine coolant system. Silicon nitride valves were successfully developed to meet several production abuse test requirements and incorporated into the test bed with a ceramic valve guide and solid film lubrication. The ADECD cylinder head features ceramic port shields to increase insulation and exhaust energy recovery. The combustion chamber includes a ceramic firedeck and piston cap. The tribological challenge posed by top ring reversal temperatures of 550 C was met through the development of vapor phase lubrication using tricresyl phosphate at the ring-liner interface. A solenoid-controlled, variable valve actuation system

  12. Advanced diesel engine component development program, tasks 4-14

    Science.gov (United States)

    Kaushal, Tony S.; Weber, Karen E.

    1994-11-01

    This report summarizes the Advanced Diesel Engine Component Development (ADECD) Program to develop and demonstrate critical technology needed to advance the heavy-duty low heat rejection engine concept. Major development activities reported are the design, analysis, and fabrication of monolithic ceramic components; vapor phase and solid film lubrication; electrohydraulic valve actuation; and high pressure common rail injection. An advanced single cylinder test bed was fabricated as a laboratory tool in studying these advanced technologies. This test bed simulates the reciprocator for a system having no cooling system, turbo compounding, Rankine bottoming cycle, common rail injection, and variable valve actuation to achieve fuel consumption of 160 g/kW-hr (.26 lb/hp-hr). The advanced concepts were successfully integrated into the test engine. All ceramic components met their functional and reliability requirements. The firedeck, cast-in-place ports, valves, valve guides, piston cap, and piston ring were made from silicon nitride. Breakthroughs required to implement a 'ceramic' engine included the fabrication of air-gap cylinder heads, elimination of compression gaskets, machining of ceramic valve seats within the ceramic firedeck, fabrication of cast-in-place ceramic port liners, implementation of vapor phase lubrication, and elimination of the engine coolant system. Silicon nitride valves were successfully developed to meet several production abuse test requirements and incorporated into the test bed with a ceramic valve guide and solid film lubrication. The ADECD cylinder head features ceramic port shields to increase insulation and exhaust energy recovery. The combustion chamber includes a ceramic firedeck and piston cap. The tribological challenge posed by top ring reversal temperatures of 550 C was met through the development of vapor phase lubrication using tricresyl phosphate at the ring-liner interface. A solenoid-controlled, variable valve actuation system

  13. A Three-Year Field Validation Study to Improve the Integrated Pest Management of Hot Pepper

    Directory of Open Access Journals (Sweden)

    Ji-Hoon Kim

    2013-09-01

    Full Text Available To improve the integrated pest management (IPM of hot pepper, field study was conducted in Hwasung from 2010 to 2012 and an IPM system was developed to help growers decide when to apply pesticides to control anthracnose, tobacco budworm, Phytophthora blight, bacterial wilt, and bacterial leaf spot. The three field treatments consisted of IPM sprays following the forecast model advisory, a periodic spray at 7-to-10-day intervals, and no spray (control. The number of annual pesticide applications for the IPM treatment ranged from six to eight, whereas the plots subjected to the periodic treatment received pesticide 11 or 12 times annually for three years. Compared to the former strategy, our improved IPM strategy features more intense pest management, with frequent spraying for anthracnose and mixed spraying for tobacco budworm or Phytophthora blight. The incidences for no pesticide control in 2010, 2011, and 2012 were 91, 97.6, and 41.4%, respectively. Conversely, the incidences for the IPM treatment for those years were 7.6, 62.6, and 2%, and the yields from IPM-treated plots were 48.6 kg, 12.1 kg, and 48.8 kg. The incidence and yield in the IPM-treated plots were almost the same as those of the periodic treatment except in 2011, in which no unnecessary sprays were given, meaning that the IPM control was quite successful. From reviewing eight years of field work, sophisticated forecasts that optimize pesticide spray timing reveal that reliance on pesticides can be reduced without compromising yield. Eco-friendly strategies can be implemented in the pest management of hot pepper.

  14. Effectiveness of an Integrated Pest Management Intervention in Controlling Cockroaches, Mice, and Allergens in New York City Public Housing

    Science.gov (United States)

    Kass, Daniel; McKelvey, Wendy; Carlton, Elizabeth; Hernandez, Marta; Chew, Ginger; Nagle, Sean; Garfinkel, Robin; Clarke, Brian; Tiven, Julius; Espino, Christian; Evans, David

    2009-01-01

    Background Cockroaches and mice, which are common in urban homes, are sources of allergens capable of triggering asthma symptoms. Traditional pest control involves the use of scheduled applications of pesticides by professionals as well as pesticide use by residents. In contrast, integrated pest management (IPM) involves sanitation, building maintenance, and limited use of least toxic pesticides. Objectives We implemented and evaluated IPM compared with traditional practice for its impact on pests, allergens, pesticide use, and resident satisfaction in a large urban public housing authority. Methods We assigned IPM or control status to 13 buildings in five housing developments, and evaluated conditions at baseline, 3 months, and 6 months in 280 apartments in Brooklyn and Manhattan, in New York City (New York). We measured cockroach and mouse populations, collected cockroach and mouse urinary protein allergens in dust, and interviewed residents. All statistical models controlled for baseline levels of pests or allergens. Results Compared with controls, apartments receiving IPM had significantly lower counts of cockroaches at 3 months and greater success in reducing or sustaining low counts of cockroaches at both 3 and 6 months. IPM was associated with lower cockroach allergen levels in kitchens at 3 months and in beds and kitchens at 6 months. Pesticide use was reduced in IPM relative to control apartments. Residents of IPM apartments also rated building services more positively. Conclusions In contrast to previous IPM studies, which involved extensive cleaning, repeat visits, and often extensive resident education, we found that an easily replicable single IPM visit was more effective than the regular application of pesticides alone in managing pests and their consequences. PMID:19672400

  15. Development of the Inspection and Diagnosis Technology for the NSSS Components Integrity

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae Hee; Eom, Heung Soup; Lee, Jae Cheol and others

    2005-02-15

    This project aims at the development of new technologies for a monitoring, inspection, diagnosis and evaluation of the safety related components in nuclear power plants. These technologies are required to detect the defects in the components of nuclear power plants and to prepare thoroughly against accidents. We performed the 1st stage of the study on the four issues recently focused. Thus we developed an analysis model of dynamic characteristics on the reactor internals, an on-line monitoring technology using an ultrasonic guided wave, a network based remote inspection system and an inspection robot for a control rod guide tube support pin. We also performed a lifetime estimation and degradation analysis of the NPP cables through accelerated degradation tests. The technologies developed in this project are applied to the components of nuclear power plants. The applications include a localization of the NSSS integrity monitoring system, replacement of an in-service inspection by on-line monitoring, remote inspection of the major components of the plants, lifetime estimation of the degraded plant cables, and so on. Elemental technologies obtained through the project can have great ripple effects in general industry, and can be applied to the inspection and diagnosis of the components in the other industries.

  16. Development of the Inspection and Diagnosis Technology for the NSSS Components Integrity

    International Nuclear Information System (INIS)

    Kim, Jae Hee; Eom, Heung Soup; Lee, Jae Cheol and others

    2005-02-01

    This project aims at the development of new technologies for a monitoring, inspection, diagnosis and evaluation of the safety related components in nuclear power plants. These technologies are required to detect the defects in the components of nuclear power plants and to prepare thoroughly against accidents. We performed the 1st stage of the study on the four issues recently focused. Thus we developed an analysis model of dynamic characteristics on the reactor internals, an on-line monitoring technology using an ultrasonic guided wave, a network based remote inspection system and an inspection robot for a control rod guide tube support pin. We also performed a lifetime estimation and degradation analysis of the NPP cables through accelerated degradation tests. The technologies developed in this project are applied to the components of nuclear power plants. The applications include a localization of the NSSS integrity monitoring system, replacement of an in-service inspection by on-line monitoring, remote inspection of the major components of the plants, lifetime estimation of the degraded plant cables, and so on. Elemental technologies obtained through the project can have great ripple effects in general industry, and can be applied to the inspection and diagnosis of the components in the other industries

  17. Developing a GIS for CO2 analysis using lightweight, open source components

    Science.gov (United States)

    Verma, R.; Goodale, C. E.; Hart, A. F.; Kulawik, S. S.; Law, E.; Osterman, G. B.; Braverman, A.; Nguyen, H. M.; Mattmann, C. A.; Crichton, D. J.; Eldering, A.; Castano, R.; Gunson, M. R.

    2012-12-01

    There are advantages to approaching the realm of geographic information systems (GIS) using lightweight, open source components in place of a more traditional web map service (WMS) solution. Rapid prototyping, schema-less data storage, the flexible interchange of components, and open source community support are just some of the benefits. In our effort to develop an application supporting the geospatial and temporal rendering of remote sensing carbon-dioxide (CO2) data for the CO2 Virtual Science Data Environment project, we have connected heterogeneous open source components together to form a GIS. Utilizing widely popular open source components including the schema-less database MongoDB, Leaflet interactive maps, the HighCharts JavaScript graphing library, and Python Bottle web-services, we have constructed a system for rapidly visualizing CO2 data with reduced up-front development costs. These components can be aggregated together, resulting in a configurable stack capable of replicating features provided by more standard GIS technologies. The approach we have taken is not meant to replace the more established GIS solutions, but to instead offer a rapid way to provide GIS features early in the development of an application and to offer a path towards utilizing more capable GIS technology in the future.

  18. [Development and application of component-based Chinese medicine theory].

    Science.gov (United States)

    Zhang, Jun-Hua; Fan, Guan-Wei; Zhang, Han; Fan, Xiao-Hui; Wang, Yi; Liu, Li-Mei; Li, Chuan; Gao, Yue; Gao, Xiu-Mei; Zhang, Bo-Li

    2017-11-01

    Traditional Chinese medicine (TCM) prescription is the main therapies for disease prevention and treatment in Chinese medicine. Following the guidance of the theory of TCM and developing drug by composing prescriptions of TCM materials and pieces, it is a traditional application mode of TCM, and still widely used in clinic. TCM prescription has theoretical advantages and rich clinical application experience in dealing with multi-factor complex diseases, but scientific research is relatively weak. The lack of scientific cognition of the effective substances and mechanism of Chinese medicine leads to insufficient understanding of the efficacy regularity, which affects the stability of effect and hinders the improvement of quality of Chinese medicinal products. Component-based Chinese medicine (CCM) is an innovation based on inheritance, which breaks through the tradition of experience-based prescription and realize the transformation of compatibility from herbal pieces to components. CCM is an important achievement during the research process of modernization of Chinese medicine. Under the support of three national "973" projects, in order to reveal the scientific connotation of the prescription compatibility theory and develop innovative Chinese drugs, we have launched theoretical innovation and technological innovation around the "two relatively clear", and opened up the research field of CCM. CCM is an innovation based on inheritance, breaking through the tradition of experience based prescription, and realizing the transformation from compatibility of herbal pieces to component compatibility, which is an important achievement of the modernization of traditional Chinese medicine. In the past more than 10 years, with the deepening of research and the expansion of application, the theory and methods of CCM and efficacy-oriented compatibility have been continuously improved. The value of CCM is not only in developing new drug, more important is to build a

  19. Development of strength evaluation method for high-pressure ceramic components

    Energy Technology Data Exchange (ETDEWEB)

    Takegami, Hiroaki, E-mail: takegami.hiroaki@jaea.go.jp; Terada, Atsuhiko; Inagaki, Yoshiyuki

    2014-05-01

    Japan Atomic Energy Agency is conducting R and D on nuclear hydrogen production by the Iodine-Sulfur (IS) process. Since highly corrosive materials such as sulfuric and hydriodic acids are used in the IS process, it is very important to develop components made of corrosion resistant materials. Therefore, we have been developing a sulfuric acid decomposer made of a ceramic material, that is, silicon carbide (SiC), which shows excellent corrosion resistance to sulfuric acid. One of the key technological challenges for the practical use of a ceramic sulfuric acid decomposer made of SiC is to be licensed in accordance with the High Pressure Gas Safety Act for high-pressure operations of the IS process. Since the strength of a ceramic material depends on its geometric form, etc., the strength evaluation method required for a pressure design is not established. Therefore, we propose a novel strength evaluation method for SiC structures based on the effective volume theory in order to extend the range of application of the effective volume. We also developed a design method for ceramic apparatus with the strength evaluation method in order to obtain a license in accordance with the High Pressure Gas Safety Act. In this paper, the minimum strength of SiC components was calculated by Monte Carlo simulation, and the minimum strength evaluation method of SiC components was developed by using the results of simulation. The method was confirmed by fracture test of tube model and reference data.

  20. Judicious use of custom development in an open source component architecture

    Science.gov (United States)

    Bristol, S.; Latysh, N.; Long, D.; Tekell, S.; Allen, J.

    2014-12-01

    Modern software engineering is not as much programming from scratch as innovative assembly of existing components. Seamlessly integrating disparate components into scalable, performant architecture requires sound engineering craftsmanship and can often result in increased cost efficiency and accelerated capabilities if software teams focus their creativity on the edges of the problem space. ScienceBase is part of the U.S. Geological Survey scientific cyberinfrastructure, providing data and information management, distribution services, and analysis capabilities in a way that strives to follow this pattern. ScienceBase leverages open source NoSQL and relational databases, search indexing technology, spatial service engines, numerous libraries, and one proprietary but necessary software component in its architecture. The primary engineering focus is cohesive component interaction, including construction of a seamless Application Programming Interface (API) across all elements. The API allows researchers and software developers alike to leverage the infrastructure in unique, creative ways. Scaling the ScienceBase architecture and core API with increasing data volume (more databases) and complexity (integrated science problems) is a primary challenge addressed by judicious use of custom development in the component architecture. Other data management and informatics activities in the earth sciences have independently resolved to a similar design of reusing and building upon established technology and are working through similar issues for managing and developing information (e.g., U.S. Geoscience Information Network; NASA's Earth Observing System Clearing House; GSToRE at the University of New Mexico). Recent discussions facilitated through the Earth Science Information Partners are exploring potential avenues to exploit the implicit relationships between similar projects for explicit gains in our ability to more rapidly advance global scientific cyberinfrastructure.

  1. Area-wide integration of lepidopteran F1 sterility and augmentative biological control

    International Nuclear Information System (INIS)

    Carpenter, James E.

    2000-01-01

    Area-wide pest management (APM) and integrated pest management (IPM) originated from two different efforts to combine two or more control techniques into programmes in which each method could synergise the effectiveness of others and thus create a level of pest control that was greater than that of a single technique (Perkins 1982). Since then, the concept of APM has evolved to include many aspects of IPM and often is now referred to as area-wide IPM. Still, the element of total population management is central to this approach of insect pest management. In support of APM, Knipling (1998) stated that of the insect pests that were of major concern to agriculture before the newer classes of insecticides were available, most are still pests today, the major exceptions being the screw-worm fly and the boll weevil in the southeastern US cotton growing region. Knipling also noted that both of these pest species were subjected to area-wide suppression programmes. In response to the USDA IPM Initiative (USDA 1993, 1994) which seeks to achieve the national goal of having 75% of the crop acres under IPM by the year 2000, the Agricultural Research Service developed an Area-wide IPM Programme. This programme combines environmentally-sound pest control techniques with the advantages of APM and develops partnerships with other federal, state, local and private sector entities. Technologies such as the integration of lepidopteran F 1 sterility and augmentative biological control may be considered for future programmes

  2. Half-liter supernatant sampler system engineering work plan

    International Nuclear Information System (INIS)

    Ritter, G.A.

    1995-01-01

    The Tank Waste Remediation System (TWRS) pretreatment facility project W-236B, known as the Initial Pretreatment Module (IPM), requires samples of supernatants and sludges from 200 Area tank farms for planned hot testing work in support of IPM design. The IPM project has proposed the development of several new sampler systems. These systems include a 0.5-l supernatant sampler, 3-l and 25-l supernatant and sludge samplers, and a 4,000-l sampler system. The 0.5-l sampler will support IPM sampling needs in the 1 to 3 l range starting in late fiscal year 1995. This sampler is intended to be used in conjunction with the existing 100 ml bottle-on-a-string. The 3-l and 25-l systems will be based on the Savannah River Site's sampler system and will support IPM sampling needs in the 3 to 100 liter range. Most of the hot testing required for design of the IPM must be accomplished in the next 3 years. This work plan defines the tasks associated with the development of a 0.5-l sampler system. This system will be referred to as the Half-Liter Supernatant Sampler System (HLSSS). Specifically, this work plan will define the scope of work, identify organizational responsibilities, identify major technical requirements, describe configuration control and verification requirements, and provide estimated costs and schedule. The sampler system will be fully operational, including trained staff and operating procedures, upon completion of this task

  3. Managing Pests in Schools

    Science.gov (United States)

    Provides basic information on integrated pest management in schools, including information on the components of an IPM program and guidance on how to get started. Includes identification and control of pests, educational resources, and contact information

  4. Development of high performance scientific components for interoperability of computing packages

    Energy Technology Data Exchange (ETDEWEB)

    Gulabani, Teena Pratap [Iowa State Univ., Ames, IA (United States)

    2008-01-01

    Three major high performance quantum chemistry computational packages, NWChem, GAMESS and MPQC have been developed by different research efforts following different design patterns. The goal is to achieve interoperability among these packages by overcoming the challenges caused by the different communication patterns and software design of each of these packages. A chemistry algorithm is hard to develop as well as being a time consuming process; integration of large quantum chemistry packages will allow resource sharing and thus avoid reinvention of the wheel. Creating connections between these incompatible packages is the major motivation of the proposed work. This interoperability is achieved by bringing the benefits of Component Based Software Engineering through a plug-and-play component framework called Common Component Architecture (CCA). In this thesis, I present a strategy and process used for interfacing two widely used and important computational chemistry methodologies: Quantum Mechanics and Molecular Mechanics. To show the feasibility of the proposed approach the Tuning and Analysis Utility (TAU) has been coupled with NWChem code and its CCA components. Results show that the overhead is negligible when compared to the ease and potential of organizing and coping with large-scale software applications.

  5. Onboard Autonomy and Ground Operations Automation for the Intelligent Payload Experiment (IPEX) CubeSat Mission

    Science.gov (United States)

    Chien, Steve; Doubleday, Joshua; Ortega, Kevin; Tran, Daniel; Bellardo, John; Williams, Austin; Piug-Suari, Jordi; Crum, Gary; Flatley, Thomas

    2012-01-01

    The Intelligent Payload Experiment (IPEX) is a cubesat manifested for launch in October 2013 that will flight validate autonomous operations for onboard instrument processing and product generation for the Intelligent Payload Module (IPM) of the Hyperspectral Infra-red Imager (HyspIRI) mission concept. We first describe the ground and flight operations concept for HyspIRI IPM operations. We then describe the ground and flight operations concept for the IPEX mission and how that will validate HyspIRI IPM operations. We then detail the current status of the mission and outline the schedule for future development.

  6. Low Cost High Performance Generator Technology Program. Volume 3. Component development

    International Nuclear Information System (INIS)

    1975-06-01

    The status of the component development effort both in the thermoelectric module area and in the heat source task is reported. In addition, related efforts by outside facilities are identified and a bibliography of heat source development documents is presented

  7. The development, regulation and use of biopesticides for integrated pest management

    Science.gov (United States)

    Chandler, David; Bailey, Alastair S.; Tatchell, G. Mark; Davidson, Gill; Greaves, Justin; Grant, Wyn P.

    2011-01-01

    Over the past 50 years, crop protection has relied heavily on synthetic chemical pesticides, but their availability is now declining as a result of new legislation and the evolution of resistance in pest populations. Therefore, alternative pest management tactics are needed. Biopesticides are pest management agents based on living micro-organisms or natural products. They have proven potential for pest management and they are being used across the world. However, they are regulated by systems designed originally for chemical pesticides that have created market entry barriers by imposing burdensome costs on the biopesticide industry. There are also significant technical barriers to making biopesticides more effective. In the European Union, a greater emphasis on Integrated Pest Management (IPM) as part of agricultural policy may lead to innovations in the way that biopesticides are regulated. There are also new opportunities for developing biopesticides in IPM by combining ecological science with post-genomics technologies. The new biopesticide products that will result from this research will bring with them new regulatory and economic challenges that must be addressed through joint working between social and natural scientists, policy makers and industry. PMID:21624919

  8. A model-based software development methodology for high-end automotive components

    NARCIS (Netherlands)

    Ravanan, Mahmoud

    2014-01-01

    This report provides a model-based software development methodology for high-end automotive components. The V-model is used as a process model throughout the development of the software platform. It offers a framework that simplifies the relation between requirements, design, implementation,

  9. Agricultural extension officers' perceptions of integrated pest ...

    African Journals Online (AJOL)

    On the basis of the positive perceptions of the extension officers regarding IPM, the government of Kenya should establish a supportive policy that will enable the extension officers to promote and educate farmers on the various IPM practices. International Journal of Agriculture and Rural Development Vol. 7(2) 2006: 125- ...

  10. Development of design Criteria for ITER In-vessel Components

    International Nuclear Information System (INIS)

    Sannazzaro, G.; Barabash, V.; Kang, S.C.; Fernandez, E.; Kalinin, G.; Obushev, A.; Martínez, V.J.; Vázquez, I.; Fernández, F.; Guirao, J.

    2013-01-01

    Absrtract: The components located inside the ITER vacuum chamber (in-vessel components – IC), due to their specific nature and the environments they are exposed to (neutron radiation, high heat fluxes, electromagnetic forces, etc.), have specific design criteria which are, in this paper, referred as Structural Design Criteria for In-vessel Components (SDC-IC). The development of these criteria started in the very early phase of the ITER design and followed closely the criteria of the RCC-MR code. Specific rules to include the effect of neutron irradiation were implemented. In 2008 the need of an update of the SDC-IC was identified to add missing specifications, to implement improvements, to modernise rules including recent evolutions in international codes and regulations (i.e. PED). Collaboration was set up between ITER Organization (IO), European (EUDA) and Russian Federation (RFDA) Domestic Agencies to generate a new version of SDC-IC. A Peer Review Group (PRG) composed by members of the ITER Organization and all ITER Domestic Agencies and code experts was set-up to review the proposed modifications, to provide comments, contributions and recommendations

  11. Insecticides -a cure or curse and rational use of integrated pest management in Pakistan

    International Nuclear Information System (INIS)

    Irshad, M.

    2005-01-01

    Chemical based control in crops has increased the pest problem, disturbed the agro ecosystem and has killed the non-target and environmentally friendly organisms and misuse of insecticides has led to resistance to insecticides, resurgence of secondary pests, polluting soil, water and food with contaminates. In addition to this, irrigation and drinking water, cottonseed oil, lint and cattle feed and animal milk are also contaminated having deleterious effects on human life. To reduce chemical control, Integrated Pest Management (IPM) emerged. Its emphasis is on non-disturbance of ecosystem but to manage the insect pest populations with all the available means on economic basis. IPM approach is knowledge based with in-depth information. In spite of IPM studies and work unfortunately reliance on pesticides has not been reduced in Pakistan. Conservation/augmentation, releases of new biotic agents may disturb the ecosystem. The stress on IPM is made in the developed countries primarily due to human health factor. These societies even risk the reduction in yield in the IPM fields. Successful stories of IPM in Pakistan has not been cashed to due merits. The bottlenecks must be removed so that better results can be obtained. The main reason seems to be lack of in depth involvement of the growers in this activity. (author)

  12. Component configuration control system development at EBR-II

    International Nuclear Information System (INIS)

    Monson, L.R.; Stratton, R.C.

    1984-01-01

    One ofthe major programs being pursued by the EBR-II Division of Argonne National Laboratory is to improve the reliability of plant control and protection systems. This effort involves looking closely at the present state of the art and needs associated with plant diagnostic, control and protection systems. One of the areas of development at EBR-II involves a component configuration control system (CCCS). This system is a computerized control and planning aid for the nuclear power operator

  13. The Management of Insect Pests in Australian Cotton: An Evolving Story.

    Science.gov (United States)

    Wilson, Lewis J; Whitehouse, Mary E A; Herron, Grant A

    2018-01-07

    The Australian cotton industry progressively embraced integrated pest management (IPM) to alleviate escalating insecticide resistance issues. A systems IPM approach was used with core principles that were built around pest ecology/biology and insecticide resistance management; together, these were integrated into a flexible, year-round approach that facilitated easy incorporation of new science, strategies, and pests. The approach emphasized both strategic and tactical elements to reduce pest abundance and rationalize decisions about pest control, with insecticides as a last resort. Industry involvement in developing the approach was vital to embedding IPM within the farming system. Adoption of IPM was facilitated by the introduction of Bt cotton, availability of selective insecticides, economic validation, and an industry-wide extension campaign. Surveys indicate IPM is now embedded in industry, confirming the effectiveness of an industry-led, backed-by-science approach. The amount of insecticide active ingredient applied per hectare against pests has also declined dramatically. Though challenges remain, pest management has transitioned from reactively attempting to eradicate pests from fields to proactively managing them year-round, considering the farm within the wider landscape.

  14. Review of Ecologically-Based Pest Management in California Vineyards.

    Science.gov (United States)

    Wilson, Houston; Daane, Kent M

    2017-10-11

    Grape growers in California utilize a variety of biological, cultural, and chemical approaches for the management of insect and mite pests in vineyards. This combination of strategies falls within the integrated pest management (IPM) framework, which is considered to be the dominant pest management paradigm in vineyards. While the adoption of IPM has led to notable and significant reductions in the environmental impacts of grape production, some growers are becoming interested in the use of an explicitly non-pesticide approach to pest management that is broadly referred to as ecologically-based pest management (EBPM). Essentially a subset of IPM strategies, EBPM places strong emphasis on practices such as habitat management, natural enemy augmentation and conservation, and animal integration. Here, we summarize the range and known efficacy of EBPM practices utilized in California vineyards, followed by a discussion of research needs and future policy directions. EBPM should in no way be seen in opposition, or as an alternative to the IPM framework. Rather, the further development of more reliable EBPM practices could contribute to the robustness of IPM strategies available to grape growers.

  15. Integrated Management of Structural Pests in Schools.

    Science.gov (United States)

    Illinois State Dept. of Public Health, Springfield.

    The state of Illinois is encouraging schools to better inspect and evaluate the causes of their pest infestation problems through use of the Integrated Pest Management (IPM) guidelines developed by the Illinois Department of Public Health. This guide reviews the philosophy and organization of an IPM program for structural pests in schools,…

  16. Urban Pest Management. Selected Readings.

    Science.gov (United States)

    Cowles, Kathleen Letcher, Comp.; And Others

    These readings provide basic background information on urban integrated pest management and the development of Integrated Pest Management (IPM) programs for the control of rodents, cockroaches, and head lice. IPM is a decision-making process for deciding if pest supprssion treatments are needed, when they should be initiated, where they should be…

  17. Total intermittent Pringle maneuver during liver resection can induce intestinal epithelial cell damage and endotoxemia.

    Directory of Open Access Journals (Sweden)

    Simon A W G Dello

    Full Text Available OBJECTIVES: The intermittent Pringle maneuver (IPM is frequently applied to minimize blood loss during liver transection. Clamping the hepatoduodenal ligament blocks the hepatic inflow, which leads to a non circulating (hepatosplanchnic outflow. Also, IPM blocks the mesenteric venous drainage (as well as the splenic drainage with raising pressure in the microvascular network of the intestinal structures. It is unknown whether the IPM is harmful to the gut. The aim was to investigate intestinal epithelial cell damage reflected by circulating intestinal fatty acid binding protein levels (I-FABP in patients undergoing liver resection with IPM. METHODS: Patients who underwent liver surgery received total IPM (total-IPM or selective IPM (sel-IPM. A selective IPM was performed by selectively clamping the right portal pedicle. Patients without IPM served as controls (no-IPM. Arterial blood samples were taken immediately after incision, ischemia and reperfusion of the liver, transection, 8 hours after start of surgery and on the first post-operative day. RESULTS: 24 patients (13 males were included. 7 patients received cycles of 15 minutes and 5 patients received cycles of 30 minutes of hepatic inflow occlusion. 6 patients received cycles of 15 minutes selective hepatic occlusion and 6 patients underwent surgery without inflow occlusion. Application of total-IPM resulted in a significant increase in I-FABP 8 hours after start of surgery compared to baseline (p<0.005. In the no-IPM group and sel-IPM group no significant increase in I-FABP at any time point compared to baseline was observed. CONCLUSION: Total-IPM in patients undergoing liver resection is associated with a substantial increase in arterial I-FABP, pointing to intestinal epithelial injury during liver surgery. TRIAL REGISTRATION: ClinicalTrials.gov NCT01099475.

  18. Development of the software for the component reliability database system of Korean nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Han, Sang Hoon; Kim, Seung Hwan; Choi, Sun Young [Korea Atomic Energy Research Institute, Taejeon (Korea)

    2002-03-01

    A study was performed to develop the system for the component reliability database which consists of database system to store the reliability data and softwares to analyze the reliability data.This system is a part of KIND (Korea Information System for Nuclear Reliability Database).The MS-SQL database is used to stores the component population data, component maintenance history, and the results of reliability analysis. Two softwares were developed for the component reliability system. One is the KIND-InfoView for the data storing, retrieving and searching. The other is the KIND-CompRel for the statistical analysis of component reliability. 4 refs., 13 figs., 7 tabs. (Author)

  19. Development of Tools for DER Components in a Distribution Network

    DEFF Research Database (Denmark)

    Mihet-Popa, Lucian; Koch-Ciobotaru, C; Isleifsson, Fridrik Rafn

    2012-01-01

    The increasing amount of Distributed Energy Resources (DER) components into distribution networks involves the development of accurate simulation models that take into account an increasing number of factors that influence the output power from the DG systems. This paper presents two simulation m...

  20. A Component-based Software Development and Execution Framework for CAx Applications

    Directory of Open Access Journals (Sweden)

    N. Matsuki

    2004-01-01

    Full Text Available Digitalization of the manufacturing process and technologies is regarded as the key to increased competitive ability. The MZ-Platform infrastructure is a component-based software development framework, designed for supporting enterprises to enhance digitalized technologies using software tools and CAx components in a self-innovative way. In the paper we show the algorithm, system architecture, and a CAx application example on MZ-Platform. We also propose a new parametric data structure based on MZ-Platform.

  1. Effect of Integrated Pest Management Training on Ugandan Small-Scale Farmers

    DEFF Research Database (Denmark)

    Clausen, Anna Sabine; Jørs, Erik; Atuhaire, Aggrey

    2017-01-01

    Small-scale farmers in developing countries use hazardous pesticides taking few or no safety measures. Farmer field schools (FFSs) teaching integrated pest management (IPM) have been shown to reduce pesticide use among trained farmers. This cross-sectional study compares pesticide-related knowledge......-reported symptoms. The study supports IPM as a method to reduce pesticide use and potential exposure and to improve pesticide-related KAP among small-scale farmers in developing countries....

  2. An Integrated Pest Management Tool for Evaluating Schools

    Science.gov (United States)

    Bennett, Blake; Hurley, Janet; Merchant, Mike

    2016-01-01

    Having the ability to assess pest problems in schools is essential for a successful integrated pest management (IPM) program. However, such expertise can be costly and is not available to all school districts across the United States. The web-based IPM Calculator was developed to address this problem. By answering questions about the condition of…

  3. COMDES-II: A Component-Based Framework for Generative Development of Distributed Real-Time Control Systems

    DEFF Research Database (Denmark)

    Ke, Xu; Sierszecki, Krzysztof; Angelov, Christo K.

    2007-01-01

    The paper presents a generative development methodology and component models of COMDES-II, a component-based software framework for distributed embedded control systems with real-time constraints. The adopted methodology allows for rapid modeling and validation of control software at a higher lev...... methodology for COMDES-II from a general perspective, describes the component models in details and demonstrates their application through a DC-Motor control system case study.......The paper presents a generative development methodology and component models of COMDES-II, a component-based software framework for distributed embedded control systems with real-time constraints. The adopted methodology allows for rapid modeling and validation of control software at a higher level...

  4. Development of life evaluation technology for nuclear power plant components

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Kim, Yun Jae; Choi, Jae Boong [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2002-03-15

    This project focuses on developing reliable life evaluation technology for nuclear power plant components, and is divided into two parts, development of a life evaluation system for nuclear pressure vessels and evaluation of applicability of emerging technology to operating plants. For the development of life evaluation system for nuclear pressure vessels, the following seven topics are covered in this project: defect assessment method for steam generator tubes, development of fatigue monitoring system, assessment of corroded pipes, domestic round robin analysis for constructing P-T limit curve for RPV, development of probabilistic integrity assessment technique, effect of aging on strength of dissimilar welds, applicability of LBB to cast stainless steel, and development of probabilistic piping fracture mechanics.

  5. BWR Refill-Reflood Program, Task 4.7 - model development: TRAC-BWR component models

    International Nuclear Information System (INIS)

    Cheung, Y.K.; Parameswaran, V.; Shaug, J.C.

    1983-09-01

    TRAC (Transient Reactor Analysis Code) is a computer code for best-estimate analysis for the thermal hydraulic conditions in a reactor system. The development and assessment of the BWR component models developed under the Refill/Reflood Program that are necessary to structure a BWR-version of TRAC are described in this report. These component models are the jet pump, steam separator, steam dryer, two-phase level tracking model, and upper-plenum mixing model. These models have been implemented into TRAC-B02. Also a single-channel option has been developed for individual fuel-channel analysis following a system-response calculation

  6. Heat source component development program. Quarterly report for April--June 1977

    Energy Technology Data Exchange (ETDEWEB)

    Foster, E.L. Jr. (comp.)

    1977-07-01

    This is the third in a series of quarterly reports describing the results of several experimental programs being conducted at Battelle-Columbus to develop components for advanced radioisotope heat source applications. The heat sources will for the most part be used in advanced static and dynamic power conversion systems. The specific component development efforts which are described include: improved selective and nonselective vents for helium release from the fuel containment; an improved reentry member and an improved impact member, singly and combined. The unitized reentry-impact member (RIM) is under development to be used as a bifunctional ablator. The development of a unitized reentry-impact member (RIM) has been stopped and the efforts are being redirected to the evaluation of materials that could be used in the near term for the module housing of the General Purpose Heat Source (GPHS). This redirection will be particularly felt in the selection of (improved) materials for reentry analysis and in the experimental evaluation of materials in impact tests. Finally thermochemical supporting studies are reported.

  7. Implementing reduced-risk integrated pest management in fresh-market cabbage: improved net returns via scouting and timing of effective control.

    Science.gov (United States)

    Burkness, Eric C; Hutchison, W D

    2008-04-01

    During 1998-2001, field studies were done to assess the efficacy of an integrated pest management (IPM) program using an action threshold and "reduced-risk" insecticides. The IPM program was compared with a conventional grower-based program. Program performance was evaluated based on management of Trichoplusia ni (Hiibner), Pieris (=Artogeia) rapae (L.), and Plutella xylostella (L.), as well as the economic impact of each program on net returns. The action threshold used in the IPM program consisted of 10% plants infested with T. ni larvae, based on previous small-plot experiment station trials. In all years of the study, the IPM program resulted in significantly lower percentages of plants infested than the conventional program or untreated check. The mean reduction in insecticide applications for the IPM program compared with the conventional program was 23.5%, whereas, on average, the costs of the IPM program were 46.0% higher than the conventional program. Pest reduction in the IPM program resulted in an average of 10.5% higher marketable yields than the conventional program. Percentages of marketable heads in the IPM program ranged from 82 to 99% and from 63 to 96% in the conventional program. Mean net returns for the IPM program exceeded the conventional program by $984.20/ha. These results indicated that the IPM program reduced insecticide use overall, even though costs of the IPM program, with either spinosad or indoxacarb, were sometimes higher. Overall, net returns of the IPM program were higher due to active pest scouting, improved application timing, and increases in marketable yield. Given the potential decrease in insecticide applications and increases in net profit resulting from this IPM program, additional analyses should be conducted to quantify the economic risk, or consistency of the results, to fully evaluate the benefits of the IPM program compared with a conventional program.

  8. Considerations on Gastronomic Tourism as a Component of Sustainable Local Development

    OpenAIRE

    Dan Mihnea Diaconescu; Remus Moraru; Gabriela Stănciulescu

    2016-01-01

    Tourism is a multi-faced activity that links the economic, social and environmental components of sustainability. Firstly, this research analyses residents’ perceptions of the impact of tourism development and examines the factors that influence the support for sustainable tourism development. Secondly, the research discusses Community Based Tourism (CBT) and its positive impact of tourism development; CBT is connected to community’s capacity to protect itself from outside threats by negotiat...

  9. Integrated Process Modeling-A Process Validation Life Cycle Companion.

    Science.gov (United States)

    Zahel, Thomas; Hauer, Stefan; Mueller, Eric M; Murphy, Patrick; Abad, Sandra; Vasilieva, Elena; Maurer, Daniel; Brocard, Cécile; Reinisch, Daniela; Sagmeister, Patrick; Herwig, Christoph

    2017-10-17

    During the regulatory requested process validation of pharmaceutical manufacturing processes, companies aim to identify, control, and continuously monitor process variation and its impact on critical quality attributes (CQAs) of the final product. It is difficult to directly connect the impact of single process parameters (PPs) to final product CQAs, especially in biopharmaceutical process development and production, where multiple unit operations are stacked together and interact with each other. Therefore, we want to present the application of Monte Carlo (MC) simulation using an integrated process model (IPM) that enables estimation of process capability even in early stages of process validation. Once the IPM is established, its capability in risk and criticality assessment is furthermore demonstrated. IPMs can be used to enable holistic production control strategies that take interactions of process parameters of multiple unit operations into account. Moreover, IPMs can be trained with development data, refined with qualification runs, and maintained with routine manufacturing data which underlines the lifecycle concept. These applications will be shown by means of a process characterization study recently conducted at a world-leading contract manufacturing organization (CMO). The new IPM methodology therefore allows anticipation of out of specification (OOS) events, identify critical process parameters, and take risk-based decisions on counteractions that increase process robustness and decrease the likelihood of OOS events.

  10. Borisade et al (10)

    African Journals Online (AJOL)

    DELL

    Entomopathogenic fungi, Metarhizium anisopliae and Isaria farinosa are biocontrol agents (BCA) widely reported for the management of insect pests, and they are potential components of Integrated Pest Management (IPM) systems. Compatibility of their infective conidia with low rates of four agrochemicals; Champ-DP ...

  11. Integrated pest management of "Golden Delicious" apples.

    Science.gov (United States)

    Simončič, A; Stopar, M; Velikonja Bolta, Š; Bavčar, D; Leskovšek, R; Baša Česnik, H

    2015-01-01

    Monitoring of plant protection product (PPP) residues in "Golden Delicious" apples was performed in 2011-2013, where 216 active substances were analysed with three analytical methods. Integrated pest management (IPM) production and improved IPM production were compared. Results were in favour of improved IPM production. Some active compounds determined in IPM production (boscalid, pyraclostrobin, thiacloprid and thiametoxam) were not found in improved IPM production. Besides that, in 2011 and 2012, captan residues were lower in improved IPM production. Risk assessment was also performed. Chronic exposure of consumers was low in general, but showed no major differences for IPM and improved IPM production for active substances determined in both types of production. Analytical results were compared with the European Union report of 2010 where 1.3% of apple samples exceeded maximum residue levels (MRLs), while MRL exceedances were not observed in this survey.

  12. Fibre Optic Gyroscope Developments Using Integrated Optic Components

    Science.gov (United States)

    Minford, W. J.; DePaula, R. M.

    1988-09-01

    The sensing of rotation using counterpropagating optical beams in a fiber loop (the SAGNAC effect) has gone through extensive developments and demonstrations since first proved feasible by Vali and Shorthilll in 1976. The interferometric fiber gyroscope minimum configuration2 which uses a common input-output port and single-mode filter was developed to provide the extreme high stability necessary to reach the sensitivities at low rotation rates attainable with current state-of-the-art detectors. The simplicity and performance of this configuration has led to its acceptance and wide-spread use. In order to increase the mechanical stability of this system, all single-mode fiber components are employed and a further advancement to integrated optics has enabled most of the optical functions to be placed on a single mass-producible substrate. Recent improvements in the components (eg polarization maintaining fiber and low coherence sources) have further enhanced the performance of the minimum configuration gyro. This presentation focused on the impact of LiNbO3 integrated optic components on gyroscope developments. The use of Ti-indiffused LiNbO3 waveguide optical circuits in interferometric fiber optic gyroscopes has taken two directions: to utilize only the phase modulator, or to combine many of the minimum configuration optical functions on the electro-optic substrate. The high-bandwidth phase modulator is the driving force for using LiNbO3 waveguide devices. This device allows both biasing the gyro for maximum sensitivity and closing the loop via frequency shifting, for example, thus increasing the dynamic range of the gyro and the linearity of the scale factor. Efforts to implement most of the minimum configuration optical functions onto a single LiNbO3 substrate have been led by Thomson CSF.3 They have demonstrated an interferometric gyroscope with excellent performance using a LiNbO3 optical circuit containing a Y-splitter, phase modulator, and surface

  13. Development of flaw assesment methodology for elevated temperature components of FBR plants

    International Nuclear Information System (INIS)

    Shimakawa, Takashi; Takahashi, Yukio; Miura, Naoki; Nakayama, Yasunari; Sawai, Tatsuaki; Tooya, Yuuji

    1999-01-01

    Fracture mechanics is applicable for the safety assessment of FBR component if a crack is assumed to exist. Inelastic response should be taken into account due to high temperature operation of FBR components. However, methodology for the application of inelastic fracture mechanics has not been established sufficiently. CRIEPI has been conducted research projects to develop a flaw assessment guideline for FBR components. This guideline consists of evaluation methods for creep-fatigue crack propagation, ductile fracture and sodium leak rate. The summary of evaluation methods on creep-fatigue crack and ductile fracture is presented in this paper. (author)

  14. Prestudy - Development of trend analysis of component failure

    International Nuclear Information System (INIS)

    Poern, K.

    1995-04-01

    The Bayesian trend analysis model that has been used for the computation of initiating event intensities (I-book) is based on the number of events that have occurred during consecutive time intervals. The model itself is a Poisson process with time-dependent intensity. For the analysis of aging it is often more relevant to use times between failures for a given component as input, where by 'time' is meant a quantity that best characterizes the age of the component (calendar time, operating time, number of activations etc). Therefore, it has been considered necessary to extend the model and the computer code to allow trend analysis of times between events, and also of several sequences of times between events. This report describes this model extension as well as an application on an introductory ageing analysis of centrifugal pumps defined in Table 5 of the T-book. The application in turn directs the attention to the need for further development of both the trend model and the data base. Figs

  15. Development of composite aircraft components in INCDT COMOTI, Bucharest

    Directory of Open Access Journals (Sweden)

    Raluca VOICU

    2012-12-01

    Full Text Available This paper presents the recent research activities within INCDT COMOTI, in the composite materials field. The author makes a short introduction of this field and presents an example of application developed within the composite materials laboratory from INCDT COMOTI, targeting the aeronautic field. The aircraft component is a stator blade made of CFRP composites, integrating new active noise reduction technologies and manufactured by means of the autoclave technology.

  16. A Measure of Suffering in relation to Anxiety and Quality of Life in IBS Patients: Preliminary Results

    Directory of Open Access Journals (Sweden)

    Sanda Pletikosić Tončić

    2017-01-01

    Full Text Available Irritable bowel syndrome (IBS is a chronic gastrointestinal (GI disorder with a severe impact on quality of life (QoL. We explored the relationship of a visual measure of suffering, the PRISM-RII, with quality of life (QoL and anxiety measures in IBS patients. Participants were 44 IBS patients who completed several questionnaires and kept a symptom diary for two weeks. The measures used were PRISM-RII (self-illness separation (SIS; illness perception measure (IPM; IBS-36 (IBS health related QoL; SF-36 (physical and mental health related QoL; State-Trait Anxiety Inventory (STAI-T; Visceral Sensitivity Index (VSI; GI-specific anxiety; and a symptom diary. SIS was negatively correlated to VSI, while IPM was negatively correlated to SIS and the physical component of SF-36 and positively to VSI and symptom severity. We found significant differences between participants who perceive their illness as small and those who perceive it as medium in SIS, symptom severity, VSI, and the mental component of SF-36. Participants, who perceived their illness as small, represented their illness as more distant, showed lower average symptom severity, and had lower GI-specific anxiety and higher QoL. The results indicate that IPM and SIS can be useful in discriminating patients with more prominent psychological difficulties and QoL impairment.

  17. The Red Queen in a potato field: integrated pest management versus chemical dependency in Colorado potato beetle control.

    Science.gov (United States)

    Alyokhin, Andrei; Mota-Sanchez, David; Baker, Mitchell; Snyder, William E; Menasha, Sandra; Whalon, Mark; Dively, Galen; Moarsi, Wassem F

    2015-03-01

    Originally designed to reconcile insecticide applications with biological control, the concept of integrated pest management (IPM) developed into the systems-based judicious and coordinated use of multiple control techniques aimed at reducing pest damage to economically tolerable levels. Chemical control, with scheduled treatments, was the starting point for most management systems in the 1950s. Although chemical control is philosophically compatible with IPM practices as a whole, reduction in pesticide use has been historically one of the main goals of IPM practitioners. In the absence of IPM, excessive reliance on pesticides has led to repeated control failures due to the evolution of resistance by pest populations. This creates the need for constant replacement of failed chemicals with new compounds, known as the 'insecticide treadmill'. In evolutionary biology, a similar phenomenon is known as the Red Queen principle - continuing change is needed for a population to persevere because its competitors undergo constant evolutionary adaptation. The Colorado potato beetle, Leptinotarsa decemlineata (Say), is an insect defoliator of potatoes that is notorious for its ability to develop insecticide resistance. In the present article, a review is given of four case studies from across the United States to demonstrate the importance of using IPM for sustainable management of a highly adaptable insect pest. Excessive reliance on often indiscriminate insecticide applications and inadequate use of alternative control methods, such as crop rotation, appear to expedite evolution of insecticide resistance in its populations. Resistance to IPM would involve synchronized adaptations to multiple unfavorable factors, requiring statistically unlikely genetic changes. Therefore, integrating different techniques is likely to reduce the need for constant replacement of failed chemicals with new ones. © 2014 Society of Chemical Industry.

  18. Component-oriented approach to the development and use of numerical models in high energy physics

    International Nuclear Information System (INIS)

    Amelin, N.S.; Komogorov, M.Eh.

    2002-01-01

    We discuss the main concepts of a component approach to the development and use of numerical models in high energy physics. This approach is realized as the NiMax software system. The discussed concepts are illustrated by numerous examples of the system user session. In appendix chapter we describe physics and numerical algorithms of the model components to perform simulation of hadronic and nuclear collisions at high energies. These components are members of hadronic application modules that have been developed with the help of the NiMax system. Given report is served as an early release of the NiMax manual mainly for model component users

  19. Development and verification test of integral reactor major components

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. I.; Kim, Y. W.; Kim, J. H. and others

    1999-03-01

    The conceptual designs for SG, MCP, CEDM to be installed in the integral reactor SMART were developed. Three-dimensional CAD models for the major components were developed to visualize the design concepts. Once-through helical steam generator was conceptually designed for SMART. Canned motor pump was adopted in the conceptual design of MCP. Linear pulse motor type and ballscrew type CEDM, which have fine control capabilities were studied for adoption in SMART. In parallel with the structural design, the electro-magnetic design was performed for the sizing motors and electro-magnet. Prototypes for the CEDM and MCP sub-assemblies were developed and tested to verify the performance. The impeller design procedure and the computer program to analyze the dynamic characteristics of MCP rotor shaft were developed. The design concepts of SG, MCP, CEDM were also invetigated for the fabricability.

  20. Development and verification test of integral reactor major components

    International Nuclear Information System (INIS)

    Kim, J. I.; Kim, Y. W.; Kim, J. H. and others

    1999-03-01

    The conceptual designs for SG, MCP, CEDM to be installed in the integral reactor SMART were developed. Three-dimensional CAD models for the major components were developed to visualize the design concepts. Once-through helical steam generator was conceptually designed for SMART. Canned motor pump was adopted in the conceptual design of MCP. Linear pulse motor type and ballscrew type CEDM, which have fine control capabilities were studied for adoption in SMART. In parallel with the structural design, the electro-magnetic design was performed for the sizing motors and electro-magnet. Prototypes for the CEDM and MCP sub-assemblies were developed and tested to verify the performance. The impeller design procedure and the computer program to analyze the dynamic characteristics of MCP rotor shaft were developed. The design concepts of SG, MCP, CEDM were also invetigated for the fabricability

  1. Fabrication development of full-sized components for GCFR core assemblies

    International Nuclear Information System (INIS)

    Lindgren, J.R.; Flynn, P.W.; Foster, L.C.

    1980-05-01

    This paper presents the status of the development of full-sized components for gas-cooled fast reactor (GCFR) core assemblies. Methods for ribbing of the fuel rod cladding, fabrication of grid spacers of two different designs, drawing of assembly flow ducts, and fabrication of fission gas collection manifolds by several methods are discussed

  2. Component database development for the CBM experiment

    International Nuclear Information System (INIS)

    Akishina, E.P.; Alexandrov, E.I.; Alexandrov, I.N.; Filozova, I.A.; Ivanov, V.V.; Friese, V.

    2015-01-01

    This paper presents the implementation of the component database for the CBM experiment. The considered database is designed to effectively manage a large number of components for different CBM detectors during their manufacture, installation and operation. This database contains information about the production company, quality indicators, including test results, information on the whereabouts of the component and its status. A functional model, a design of the database schema, a description of tables and catalogs as well as a graphical user interface system are shown. [ru

  3. Insecticidal activity of bio-oils and biochar as pyrolysis products and their combination with microbial agents against Agrotis ipsilon (Lepidoptera: Noctuidae)

    Science.gov (United States)

    Pyrolysis technology for producing biochar and bio-oils can be used as a potential alternative to make biopesticides, which are urgently needed in integrated pest management (IPM). Insecticidal activity of three components of bio-oils: aqueous, organic and their mixture, was evaluated individually a...

  4. European Perspectives on the Adoption of Non-Chemical Weed Management in Reduced Tillage Systems for Arable Crops

    DEFF Research Database (Denmark)

    Melander, B.; Munier-Jolan, N.; Schwarz, J.

    2012-01-01

    cropping systems to allow for more diversification of the crop rotations to combat these weed problems with less herbicide input. Cover crops, stubble management strategies and tactics that strengthen crop growth relative to weed growth are also seen as important components in future IPM systems...

  5. IPM-compatibility of foliar insecticides for citrus: Indices derived from toxicity to beneficial insects from four orders

    Directory of Open Access Journals (Sweden)

    J.P. Michaud

    2003-07-01

    Full Text Available A series of compounds representing four major pesticide groups were tested for toxicity to beneficial insects representing four different insect orders: Coleoptera (Coccinellidae, Hemiptera (Anthocoridae, Hymenoptera (Aphelinidae, and Neuroptera (Chrysopidae. These materials included organophosphates (methidathion, esfenvalerate and phosmet, carbamates (carbofuran, methomyl and carbaryl, pyrethroids (bifenthrin, fenpropathrin, zeta-cypermethrin, cyfluthrin and permethrin and the oxadiazine indoxacarb. Toxicity to coccinellid and lacewing species was assessed by treating 1st instar larvae with the recommended field rate of commercial products, and two 10 fold dilutions of these materials, in topical spray applications. Adult Aphytis melinus Debach and 2nd instar Orius insidiosus (Say were exposed to leaf residues of the same concentrations for 24 h. ANOVA performed on composite survival indices derived from these data resolved significant differences among materials with respect to their overall toxicity to beneficial insects. Cyfluthrin, fenpropathrin and zeta-cypermethrin all increased the developmental time of the lacewing and one or more coccinellid species for larvae that survived topical applications. Bifenthrin increased developmental time for two coccinellid species and decreased it in a third. Indoxacarb (Avaunt® WG, DuPont Corp. ranked highest overall for safety to beneficial insects, largely because of its low dermal toxicity to all species tested. Zeta-cypermethrin (Super Fury®, FMC Corporation received the second best safety rating, largely because of its low toxicity as a leaf residue to A. melinus and O. insidiosus. Phosmet (Imidan® 70W, Gowan Co. and methidathion (Supracide® 25W, Gowan Co. ranked high for safety to coccinellid species, but compounds currently recommended for use in citrus such as fenpropathrin (Danitol® 2.4EC, Sumimoto Chem. Co. and carbaryl (Sevin® XLR EC, Rhone Poulenc Ag. Co. ranked very low for IPM

  6. Transcriptome profiling in imipenem-selected Acinetobacter baumannii.

    Science.gov (United States)

    Chang, Kai-Chih; Kuo, Han-Yueh; Tang, Chuan Yi; Chang, Cheng-Wei; Lu, Chia-Wei; Liu, Chih-Chin; Lin, Huei-Ru; Chen, Kuan-Hsueh; Liou, Ming-Li

    2014-09-26

    Carbapenem-resistance in Acinetobacter baumannii has gradually become a global challenge. To identify the genes involved in carbapenem resistance in A. baumannii, the transcriptomic responses of the completely sequenced strain ATCC 17978 selected with 0.5 mg/L (IPM-2 m) and 2 mg/L (IPM-8 m) imipenem were investigated using RNA-sequencing to identify differences in the gene expression patterns. A total of 88 and 68 genes were differentially expressed in response to IPM-2 m and IPM-8 m selection, respectively. Among the expressed genes, 50 genes were highly expressed in IPM-2 m, 30 genes were highly expressed in IPM-8 m, and 38 genes were expressed common in both strains. Six groups of genes were simultaneously expressed in IPM-2 m and IPM-8 m mutants. The three gene groups involved in DNA recombination were up-regulated, including recombinase, transposase and DNA repair, and beta-lactamase OXA-95 and homologous recombination. The remaining gene groups involved in biofilm formation were down-regulated, including quorum sensing, secretion systems, and the csu operon. The antibiotic resistance determinants, including RND efflux transporters and multidrug resistance pumps, were over-expressed in response to IPM-2 m selection, followed by a decrease in response to IPM-8 m selection. Among the genes over-expressed in both strains, blaOXA-95, previously clustered with the blaOXA-51-like family, showed 14-fold (IPM-2 m) to 330-fold (IPM-8 m) over-expression. The expression of blaOXA-95 in IPM-2 m and IPM-8 m cells was positively correlated with the rate of imipenem hydrolysis, as demonstrated through Liquid Chromatography-Mass Spectrometry/Mass Spectrometry, suggesting that blaOXA-95 plays a critical role in conferring carbapenem resistance. In addition, A. baumannii shows an inverse relationship between carbapenem resistance and biofilm production. Gene recombination and blaOXA-95 play critical roles in carbapenem resistance in A. baumannii. Taken together, the results of

  7. Fast automotive diesel exhaust measurement using quantum cascade lasers

    Science.gov (United States)

    Herbst, J.; Brunner, R.; Lambrecht, A.

    2013-12-01

    Step by step, US and European legislations enforce the further reduction of atmospheric pollution caused by automotive exhaust emissions. This is pushing automotive development worldwide. Fuel efficient diesel engines with SCRtechnology can impede NO2-emission by reduction with NH3 down to the ppm range. To meet the very low emission limits of the Euro6 resp. US NLEV (National Low Emission Vehicle) regulations, automotive manufacturers have to optimize continuously all phases of engine operation and corresponding catalytic converters. Especially nonstationary operation holds a high potential for optimizing gasoline consumption and further reducing of pollutant emissions. Test equipment has to cope with demanding sensitivity and speed requirements. In the past Fraunhofer IPM has developed a fast emission analyzer called DEGAS (Dynamic Exhaust Gas Analyzer System), based on cryogenically cooled lead salt lasers. These systems have been used at Volkswagen AG`s test benches for a decade. Recently, IPM has developed DEGAS-Next which is based on cw quantum cascade lasers and thermoelectrically cooled detectors. The system is capable to measure three gas components (i.e. NO, NO2, NH3) in two channels with a time resolution of 20 ms and 1 ppm detection limits. We shall present test data and a comparison with fast FTIR measurements.

  8. Integrated fly management in European ruminant operations from the perspective of directive 2009/128/EC on sustainable use of pesticides.

    Science.gov (United States)

    Durel, Luc; Estrada-Peña, Augustin; Franc, Michel; Mehlhorn, Heinz; Bouyer, Jérémy

    2015-02-01

    Integrated pest management (IPM) in agriculture animals remains undeveloped as compared to IPM in crops. With respect to the range of external nuisance arthropods that may bother farm animals, development and implementation of systematic IPM strategies are difficult to carry out. However, recurrent outbreaks of blue tongue disease in sheep and cattle, the public threats regarding the prophylactic use of veterinary insecticides and the need to preserve the efficacy of available actives have to lead the reflexion on new control strategies for arthropod pests of livestock. A recent extension of EU regulation on the use of pesticides in crops provides an opportunity to compare IPM strategies and to suggest new lines of reflection for the control of nuisance pests in ruminants under European conditions. In this paper, actions suggested by the Annex III of the Directive 2009/128/CE on Sustainable Use of Pesticides and related National Action Plans from 28 member states of the EU were reviewed from an animal production perspective by a group of veterinary entomologists. Eight lines of action have been identified and thus challenged with respect to current husbandry practices in modern European ruminant operations. Many IPM strategies for crops were identified to be unsuitable for large animals. Suggestions for implementing tools, opportunities and constraint assessment, and needs for support were also discussed. Only control of pest development sites and monitoring of harmful organisms were considered achievable in the near future; both in conjunction with the use of topical insecticides. Complementary actions such as alternatives to chemical control require further researches and industrial development. Marketing of IGR-based feed additives would be of great interest, but development of new compounds for veterinary medicines is very unlikely with respect to the European regulatory environment and associated cost of development.

  9. Characterization of α-isopropylmalate synthases containing different copy numbers of tandem repeats in Mycobacterium tuberculosis

    Directory of Open Access Journals (Sweden)

    Palittapongarnpim Prasit

    2009-06-01

    Full Text Available Abstract Background Alpha-isopropylmalate synthase (α-IPMS is the key enzyme that catalyzes the first committed step in the leucine biosynthetic pathway. The gene encoding α-IPMS in Mycobacterium tuberculosis, leuA, is polymorphic due to the insertion of 57-bp repeat units referred to as Variable Number of Tandem Repeats (VNTR. The role of the VNTR found within the M. tuberculosis genome is unclear. To investigate the role of the VNTR in leuA, we compared two α-IPMS proteins with different numbers of amino acid repeats, one with two copies and the other with 14 copies. We have cloned leuA with 14 copies of the repeat units into the pET15b expression vector with a His6-tag at the N-terminus, as was previously done for the leuA gene with two copies of the repeat units. Results The recombinant His6-α-IPMS proteins with two and 14 copies (α-IPMS-2CR and α-IPMS-14CR, respectively of the repeat units were purified by immobilized metal ion affinity chromatography and gel filtration. Both enzymes were found to be dimers by gel filtration. Both enzymes work well at pH values of 7–8.5 and temperatures of 37–42°C. However, α-IPMS-14CR tolerates pH values and temperatures outside of this range better than α-IPMS-2CR does. α-IPMS-14CR has higher affinity than α-IPMS-2CR for the two substrates, α-ketoisovalerate and acetyl CoA. Furthermore, α-IPMS-2CR was feedback inhibited by the end product l-leucine, whereas α-IPMS-14CR was not. Conclusion The differences in the kinetic properties and the l-leucine feedback inhibition between the two M. tuberculosis α-IPMS proteins containing low and high numbers of VNTR indicate that a large VNTR insertion affects protein structure and function. Demonstration of l-leucine binding to α-IPMS-14CR would confirm whether or not α-IPMS-14CR responds to end-product feedback inhibition.

  10. Development of instruments and components for SANS and PNS

    Energy Technology Data Exchange (ETDEWEB)

    Park, Kook Nam; Lee, Chang Hee; Lee, C. H. and others

    2000-11-01

    The base floor of SANS was constructed by the 27 steel plates with horizontal flatness of {+-}0.5mm. That is for the two dimensional position sensitivity neutron detector(2D-PSD), which is operated in vacuum chamber, as moving smoothly. Concerned to the equipments, we designed and installed the inner-shielding of the PNS which will be used for research of magnetic structure and critical phenomena of the materials. In the development of experimental devices, we have designed and manufactured a beam-stop exchange unit and a detector carriage which are used for 2D-PSD. The detector carriage is to control the distance between sample and detector. The beam-stop exchange unit is to protect detector from exposure of direct neutron beam. Especially, many experimental devices or instruments such as high-resolution collimator, components for low temperature facility, multi-purpose vacuum chamber, etc. were made in domestic, it is worth meaningful in domestic availability and standardization for the neutron instrument component.

  11. Data-driven modelling of structured populations a practical guide to the integral projection model

    CERN Document Server

    Ellner, Stephen P; Rees, Mark

    2016-01-01

    This book is a “How To” guide for modeling population dynamics using Integral Projection Models (IPM) starting from observational data. It is written by a leading research team in this area and includes code in the R language (in the text and online) to carry out all computations. The intended audience are ecologists, evolutionary biologists, and mathematical biologists interested in developing data-driven models for animal and plant populations. IPMs may seem hard as they involve integrals. The aim of this book is to demystify IPMs, so they become the model of choice for populations structured by size or other continuously varying traits. The book uses real examples of increasing complexity to show how the life-cycle of the study organism naturally leads to the appropriate statistical analysis, which leads directly to the IPM itself. A wide range of model types and analyses are presented, including model construction, computational methods, and the underlying theory, with the more technical material in B...

  12. Development of an integrated database management system to evaluate integrity of flawed components of nuclear power plant

    International Nuclear Information System (INIS)

    Mun, H. L.; Choi, S. N.; Jang, K. S.; Hong, S. Y.; Choi, J. B.; Kim, Y. J.

    2001-01-01

    The object of this paper is to develop an NPP-IDBMS(Integrated DataBase Management System for Nuclear Power Plants) for evaluating the integrity of components of nuclear power plant using relational data model. This paper describes the relational data model, structure and development strategy for the proposed NPP-IDBMS. The NPP-IDBMS consists of database, database management system and interface part. The database part consists of plant, shape, operating condition, material properties and stress database, which are required for the integrity evaluation of each component in nuclear power plants. For the development of stress database, an extensive finite element analysis was performed for various components considering operational transients. The developed NPP-IDBMS will provide efficient and accurate way to evaluate the integrity of flawed components

  13. The RAGE Game Software Components Repository for Supporting Applied Game Development

    Directory of Open Access Journals (Sweden)

    Krassen Stefanov

    2017-09-01

    Full Text Available This paper presents the architecture of the RAGE repository, which is a unique and dedicated infrastructure that provides access to a wide variety of advanced technology components for applied game development. The RAGE project, which is the principal Horizon2020 research and innovation project on applied gaming, develops up to three dozens of software components (RAGE software assets that are reusable across a wide diversity of game engines, game platforms and programming languages. The RAGE repository provides storage space for assets and their artefacts and is designed as an asset life-cycle management system for defining, publishing, updating, searching and packaging for distribution of these assets. It will be embedded in a social platform for asset developers and other users. A dedicated Asset Repository Manager provides the main functionality of the repository and its integration with other systems. Tools supporting the Asset Manager are presented and discussed. When the RAGE repository is in full operation, applied game developers will be able to easily enhance the quality of their games by including selected advanced game software assets. Making available the RAGE repository system and its variety of software assets aims to enhance the coherence and decisiveness of the applied game industry.

  14. Technology and component development for a closed tritium cycle

    International Nuclear Information System (INIS)

    Penzhorn, R.D.; Haange, R.; Hircq, B.; Meikle, A.; Naruse, Y.

    1991-01-01

    A brief summary on recent advances in the field of tritium technology concerning the most important subsystems of the fuel cycle of a fusion reactor, i.e. the plasma exhaust pumping system, the exhaust gas clean up system, the isotope separation, the tritium storage and the tritium extraction from a blanket is provided. Experimental results, single component developments, and technical tests including those with relevant amounts of tritium that constitute the basis of proposed integral process concepts are described. 48 refs., 2 tabs

  15. Technology and component development for a closed tritium cycle

    International Nuclear Information System (INIS)

    Hircq, B.; Penzhorn, R.D.; Haange, R.; Naruse, Y.

    1991-01-01

    A brief summary on recent advances in the field of tritium technology concerning the most important subsystems of the fuel cycle of a fusion reactor, i.e. the plasma exhaust pumping system, the exhaust gas clean up system, the isotope separation, the tritium storage and the tritium extraction from a blanket is provided. Experimental results, single component developments, and technical tests including those with relevants amounts of tritium that constitute the basis of proposed integral process concepts are described. 48 refs

  16. Structuring Serendipity: Mentoring as a Component of Leadership Development Programs in Higher Education

    Science.gov (United States)

    Bonebright, Denise A.

    2014-01-01

    The need to develop a pool of well-qualified future leaders is a key concern for human resource development scholars and practitioners in higher education. Research indicates that formal leadership development programs are most effective when they are based on experiential models. Mentoring is one experiential component that can enhance such…

  17. Component Fragility Research Program: Phase 1 component prioritization

    International Nuclear Information System (INIS)

    Holman, G.S.; Chou, C.K.

    1987-06-01

    Current probabilistic risk assessment (PRA) methods for nuclear power plants utilize seismic ''fragilities'' - probabilities of failure conditioned on the severity of seismic input motion - that are based largely on limited test data and on engineering judgment. Under the NRC Component Fragility Research Program (CFRP), the Lawrence Livermore National Laboratory (LLNL) has developed and demonstrated procedures for using test data to derive probabilistic fragility descriptions for mechanical and electrical components. As part of its CFRP activities, LLNL systematically identified and categorized components influencing plant safety in order to identify ''candidate'' components for future NRC testing. Plant systems relevant to safety were first identified; within each system components were then ranked according to their importance to overall system function and their anticipated seismic capacity. Highest priority for future testing was assigned to those ''very important'' components having ''low'' seismic capacity. This report describes the LLNL prioritization effort, which also included application of ''high-level'' qualification data as an alternate means of developing probabilistic fragility descriptions for PRA applications

  18. Development of expert system for structural design of FBR components

    International Nuclear Information System (INIS)

    Ueda, Hiroyoshi; Uno, Masayoshi; Ogawa, Hiroshi; Shimakawa, Takashi; Yoshimura, Shinobu; Yagawa, Genki.

    1995-01-01

    The characteristics of structural design processes for nuclear components can be summarized as follows : (1) Many engineers belonging to different fields are working in parallel, exchanging a huge amount of data and information. (2) A final solution is determined after a number of iterative design processes. (3) Solutions have to be examined many times based on sophisticated design codes. (4) Sophisticated calculation methods such as the finite element method are frequently utilized, and experts' knowledge on such analyses plays important roles in the design process. Taking these issues into consideration, a new expert system for structural design is developed in the present study. Here, the object-oriented data flow mechanism and the blackboard model are utilized to systematize structural design processes in a computer. An automated finite element calculation module is implemented, and experts' knowledge is stored in knowledge base. In addition, a new algorithm is employed to automatically draw the design window, which is defined as an area of permissible solutions in a design parameter space. The developed system is successfully applied to obtain the design windows of four components selected from the demonstration FBR structures. (author)

  19. Development of commercial hybrid electric vehicle with native key components

    Directory of Open Access Journals (Sweden)

    S. V. Bakhmutov

    2014-01-01

    Full Text Available The perspectives of development of medium weight cargo vehicles with hybrid powertrain including Russian native key components are considered in this article. Series-parallel scheme of HEV is more relevant owing to limitations of series and parallel schemes. An example of this technology is described. This technical solution has good facilities for variation of HEV and AWD type. The authors have patented it. In addition, another main issue is to choose the types of key components with good correlation for parameters of ICE, electric motors, batteries, and inverter. Using mathematical model of the vehicle a selection and correlation of technical characteristics were carried out to meet ecological and economical requirements. After computing calculation two control strategies were accepted. The first strategy contributes to good fuel consumption, while the other one is aimed at ecology. Researchers use test benches to confirm the results of calculation, and this one was built by the authors applying native components. The result of experiment on the test bench is the growth of fuel consumption of the medium weight cargo vehicle by 25% and compliance with ecological class Euro-4.

  20. Inertial Confinement Fusion Target Component Fabrication and Technology Development report

    International Nuclear Information System (INIS)

    Steinman, D.

    1994-03-01

    On December 30, 1990, the US Department of Energy entered into a contract with General Atomics (GA) to be the Inertial Confinement Fusion Target Component Fabrication and Technology Development Support contractor. This report documents the technical activities which took place under this contract during the period of October 1, 1992 through September 30, 1993. During this period, GA was assigned 18 tasks in support of the Inertial Confinement Fusion program and its laboratories. These tasks included ''Capabilities Activation'' and ''Capabilities Demonstration'' to enable us to begin production of glass and composite polymer capsules. Capsule delivery tasks included ''Small Glass Shell Deliveries'' and ''Composite Polymer Capsules'' for Lawrence Livermore National Laboratory (LLNL) and Los Alamos National Laboratory (LANL). We also were asked to provide direct ''Onsite Support'' at LLNL and LANL. We continued planning for the transfer of ''Micromachining Equipment from Rocky Flats'' and established ''Target Component Micromachining and Electroplating Facilities'' at GA. We fabricated over 1100 films and filters of 11 types for Sandia National Laboratory and provided full-time onsite engineering support for target fabrication and characterization. We initiated development of methods to make targets for the Naval Research Laboratory. We investigated spherical interferometry, built an automated capsule sorter, and developed an apparatus for calorimetric measurement of fuel fill for LLNL. We assisted LANL in the ''Characterization of Opaque b-Layered Targets.'' We developed deuterated and UV-opaque polymers for use by the University of Rochester's Laboratory for Laser Energetics (UR/LLE) and devised a triple-orifice droplet generator to demonstrate the controlled-mass nature of the microencapsulation process

  1. Role of plant pathology in integrated pest management.

    Science.gov (United States)

    Jacobsen, B J

    1997-01-01

    Integrated Pest Management (IPM) is a paradigm that is widely adopted by all pest control disciplines but whose early definitions and philosophical basis belong to entomologists. Plant pathology research and extension work has historically emphasized integration of several control strategies and fits both historical and modern definitions of IPM. While the term IPM has been used only sparingly in the phytopathology literature, the integrated disease management strategies emphasized are now considered to be at the forefront of ecologically based or biointensive pest management. While IPM is broadly endorsed by crop protection disciplines, farmers, other agriculturalists, and consumers, the potential for Integrated Pest Management has not been fully realized. Most IPM programs reflect a package of tools and decision aids for individual crop insect, weed, nematode, and plant disease management. IPM programs that integrate all types of pests with the agroecosystem, crop growth and loss models still await the formation of interdisciplinary teams focusing on growers needs. Lack of funding for both discipline and interdisciplinary developmental research and implementation is responsible for the paucity of comprehensive IPM programs for the majority of the U.S. crop acreage. This review explores the origins and evolution of the IPM paradigm and reviews efforts to achieve the body of knowledge and implementation structure to achieve IPM's full potential.

  2. Microservices as an Evolutionary Architecture of Component-Based Development: A Think-aloud Study

    OpenAIRE

    Parizi, Reza M.

    2018-01-01

    Microservices become a fast growing and popular architectural style based on service-oriented development. One of the major advantages using component-based approaches is to support reuse. In this paper, we present a study of microservices and how these systems are related to the traditional abstract models of component-based systems. This research focuses on the core properties of microservices including their scalability, availability and resilience, consistency, coupling and cohesion, and ...

  3. Drawing-up of pesticide selectivity lists to beneficial arthropods for IPM programmes in potato.

    Science.gov (United States)

    Hautier, L; Jansen, J P; Schiffers, B; Deleu, R; Moreira, C

    2004-01-01

    In order to promote IPM programmes in potato, the toxicity of 19 fungicides, 4 herbicides and 11 insecticides commonly used in this crop in Belgium was assessed on three beneficial arthropods. These species were representative of the most important aphid specific natural enemies encountered in potatoes: a parasitic wasp--Aphidius rhopalosiphi (De Stefani-Perez) (Hym., Aphidiidae), a ladybird--Adalia bipunctata (L.) (Col., Coccinellidae) and a hoverfly--Episyrphus balteatus (Dipt., Syrphidae). In a first time, pesticides were tested on glass plates on A. rhopalosiphi adults and A. bipunctata and E. balteatus larvae. For each insect, products inducing corrected mortality (Mc) lower than 30% were directly classified in a positive list for harmless products (green list). The other compounds were further tested on plants and listed in toxicity classes according to mortalities induced during this extended laboratory test: harmless (Mc 80). A chemical determination of pesticides residues was also performed for each experiment in order to determine the exposure of beneficial arthropods to pesticide residues and to validate the application of chemicals on tested substrates. On the basis of the results of acute toxicity tests, the period of each pesticide use according to normal agricultural practices and the abundance and importance of the three different groups of aphid natural enemies at different periods of the year, four pesticides lists were built up. Each list corresponded to a different period of pesticides application: Period I--from seedling to beginning of June (based on A. rhopalosiphi tests), Period II--beginning to end of June (based on A. rhopalosiphi tests), Period III beginning to end of July (based on E. balteatus and A. bipunctata tests) and Period IV--August to harvest (no exposure of beneficials). Results showed that herbicides were not toxic to the three species and can be used according to normal agricultural practices without restrictions. All

  4. Developing standard performance testing procedures for MC and A components at a site

    International Nuclear Information System (INIS)

    Scherer, Carolynn

    2010-01-01

    The condition of a nuclear material control and accountability system (MC and A) and its individual components, as with any system combining technical elements, documentation and the human factor, may be characterized through an aggregate of values for the various parameters that determine the system's ability to perform. The MC and A system's status may be functioning effectively, marginally or not functioning based on a summary of the values of the individual parameters. This work included a review of the following elements and subsystems or components for a material control and accountability system: (1) MC and A Elements: Information subsystem, Measurement subsystem, NM access subsystem, including a tamper-indicating device (TID) program, and Automated information-gathering subsystem; and (2) Detecting NM Loses Elements: Inventory differences, Shipper/receiver differences, Confirmatory measurements and differences with accounting data, and TID or seal violations. In order to detect the absence or loss of nuclear material there must be appropriate interactions among the elements and their respective subsystems (from the list above). Additionally this work includes a review of the status of regulatory requirements for the MC and A system components and potential criteria that support the evaluation of the performance of the listed components. The listed components had performance testing algorithms and procedures developed that took into consideration the regulatory criteria. The developed MC and A performance-testing procedures were the basis for a pilot Guide for MC and A Performance Testing at the MBAs of SSC RF IPPE.

  5. Sodium vapour deposition studies related to the development of components for LMFBR in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Himeno, Y; Yamamoto, K; Takahashi, J; Mochizuki, K; Saito, R [O-arai Engineering Centre, Power Reactor and Nuclear Fuel Development Corporation, Narita, O-arai Machi, Ibaraki-ken (Japan)

    1977-01-01

    During the course of research and development for the experimental fast breeder reactor JOYO, performance tests for such components as rotating plug and vapor trap have been carried out using prototype models. In recent years, as the development effort has been concentrated to the prototype fast reactor MONJU, performance tests for the components mentioned above in large scale are now in progress. In this report, brief description of the test results and experiences obtained from these studies are presented, with the results of basic studies related to these. (author)

  6. Evolution of JAK-STAT pathway components: mechanisms and role in immune system development.

    Directory of Open Access Journals (Sweden)

    Clifford Liongue

    Full Text Available BACKGROUND: Lying downstream of a myriad of cytokine receptors, the Janus kinase (JAK-Signal transducer and activator of transcription (STAT pathway is pivotal for the development and function of the immune system, with additional important roles in other biological systems. To gain further insight into immune system evolution, we have performed a comprehensive bioinformatic analysis of the JAK-STAT pathway components, including the key negative regulators of this pathway, the SH2-domain containing tyrosine phosphatase (SHP, Protein inhibitors against Stats (PIAS, and Suppressor of cytokine signaling (SOCS proteins across a diverse range of organisms. RESULTS: Our analysis has demonstrated significant expansion of JAK-STAT pathway components co-incident with the emergence of adaptive immunity, with whole genome duplication being the principal mechanism for generating this additional diversity. In contrast, expansion of upstream cytokine receptors appears to be a pivotal driver for the differential diversification of specific pathway components. CONCLUSION: Diversification of JAK-STAT pathway components during early vertebrate development occurred concurrently with a major expansion of upstream cytokine receptors and two rounds of whole genome duplications. This produced an intricate cell-cell communication system that has made a significant contribution to the evolution of the immune system, particularly the emergence of adaptive immunity.

  7. Direct and indirect impacts of integrated pest management on pesticide use: a case of rice agriculture in Java, Indonesia.

    Science.gov (United States)

    Mariyono, Joko

    2008-10-01

    Integrated pest management (IPM) technology has been disseminated since 1989 in Indonesia to cut down pesticide use, but the adoption and diffusion of the technology are still debated. This study aims to estimate the models of demand for pesticides and to analyse the impact of IPM technology on pesticide use. Aggregate cross-section time series data from 1990-1998 are used. The results show that IPM technology reduces the use of pesticides by improving the process of rice production, such that pesticides are more efficiently used. In this case, the IPM technology is not a pest control technique. CONCLUSION There is an indication that IPM technology has been adopted by farmers. This is evidence that the IPM programme in Indonesia was successful in this area.

  8. Integrated Pest Management Intervention in Child Care Centers Improves Knowledge, Pest Control, and Practices.

    Science.gov (United States)

    Alkon, Abbey; Nouredini, Sahar; Swartz, Alicia; Sutherland, Andrew Mason; Stephens, Michelle; Davidson, Nita A; Rose, Roberta

    To reduce young children's exposure to pests and pesticides, an integrated pest management (IPM) intervention was provided for child care center staff. The 7-month IPM education and consultation intervention was conducted by trained nurse child care health consultants in 44 child care centers in California. IPM knowledge surveys were completed by child care staff, objective IPM assessments were completed by research assistants pre- and postintervention, and activity logs were completed by the nurses. There were significant increases in IPM knowledge for the child care staff who attended workshops. There were reductions in the prevalence of pests and increases in IPM practices at the postintervention compared with the preintervention time point. The nurses consulted an average of 5.4 hours per center. A nurse-led IPM intervention in child care centers can reduce exposure to harmful substances for young children attending child care centers. Copyright © 2016 National Association of Pediatric Nurse Practitioners. Published by Elsevier Inc. All rights reserved.

  9. Polyurethane Membranes Modified with Isopropyl Myristate as a Potential Candidate for Encapsulating Electronic Implants: A Study of Biocompatibility and Water Permeability

    Directory of Open Access Journals (Sweden)

    Deepen Paul

    2010-07-01

    Full Text Available Medical polyurethanes have shown good bio-stability and mechanical properties and have been used as coating for implantable medical devices. However, despite their excellent properties, they are relatively permeable to liquid water and water vapour which is a drawback for electronic implant encapsulation. In this study polyether polyurethanes with different soft segment molecular weights were modified by incorporating isopropyl myristate (IPM, as a hydrophobic modifying agent, and the effect of IPM on water resistant and biocompatibility of membranes were investigated. IPM changed the surface properties of the polyurethane film and reduced its surface energy. Polyurethane films were found to be stable with IPM concentrations of 1–5 wt% based upon their chemistry; however it leached out in BSA at higher concentrations. Though, low concentrations of IPM reduced both liquid water and water vapour permeability; at higher IPM content liquid permeability did not improved significantly. In general, the polyurethane materials showed much lower water permeability compared with currently used silicone packaging material for electronic implants. In addition, cytotoxicity assessment of IPM containing polyurethanes showed no evidence of cytotoxcity up to 5 wt% IPM.

  10. Unsupervised neural networks for solving Troesch's problem

    International Nuclear Information System (INIS)

    Raja Muhammad Asif Zahoor

    2014-01-01

    In this study, stochastic computational intelligence techniques are presented for the solution of Troesch's boundary value problem. The proposed stochastic solvers use the competency of a feed-forward artificial neural network for mathematical modeling of the problem in an unsupervised manner, whereas the learning of unknown parameters is made with local and global optimization methods as well as their combinations. Genetic algorithm (GA) and pattern search (PS) techniques are used as the global search methods and the interior point method (IPM) is used for an efficient local search. The combination of techniques like GA hybridized with IPM (GA-IPM) and PS hybridized with IPM (PS-IPM) are also applied to solve different forms of the equation. A comparison of the proposed results obtained from GA, PS, IPM, PS-IPM and GA-IPM has been made with the standard solutions including well known analytic techniques of the Adomian decomposition method, the variational iterational method and the homotopy perturbation method. The reliability and effectiveness of the proposed schemes, in term of accuracy and convergence, are evaluated from the results of statistical analysis based on sufficiently large independent runs. (interdisciplinary physics and related areas of science and technology)

  11. Development of component reliability data for PSA and risk based management in Japan

    International Nuclear Information System (INIS)

    Yoshihiro Tomioka; Mitsumasa Hirano; Shunsuke Kondo

    1997-01-01

    The author presents the outline of development of the component reliability data for PSA and risk based management in Japan. In the first part following the introduction, the development process is described. The next part describes issues discussed in the course of the development, which are treatment of zero failure data, error factor, estimation of unavailable failure rate and integral test

  12. Indicators analysis and objectives for the development sustainable and sustainability environmental

    Directory of Open Access Journals (Sweden)

    Pedro Noboa-Romero

    2016-09-01

    Full Text Available The present article is product of a research qualitative, descriptive and analytical of the indicators and objectives aimed to the development sustainable. The main objective of this essay is to analyze sustainability indicators: index of human development (IDH, sustainable development goals (SDGS, objectives of the Millennium Goals (MDGS and the index of Multidimensional poverty (IPM; through a review of research and work on these issues, in order to establish progress and results that have been generated during the use of these indicators in the field of health education, technology, and environment. Demonstrate that there is inequality between Nations, the approach is oriented to a development in the short term, benefit exclusively to current generations, exhausting natural resources, regardless of a vision in the long term for the future generations.

  13. Development of wear resistant ceramic coatings for diesel engine components

    Energy Technology Data Exchange (ETDEWEB)

    Haselkorn, M.H. (Caterpillar, Inc., Peoria, IL (United States))

    1992-04-01

    Improved fuel economy and a reduction of emissions can be achieved by insulation of the combustion chamber components to reduce heat rejection. However, insulating the combustion chamber components will also increase the operating temperature of the piston ring/cylinder liner interface from approximately 150{degree}C to over 300{degree}C. Existing ring/liner materials can not withstand these higher operating temperatures and for this reason, new materials need to be developed for this critical tribological interface. The overall goal of this program is the development of piston ring/cylinder liner material pairs which would be able to provide the required friction and wear properties at these more severe operating conditions. More specifically, this program first selected, and then evaluated, potential d/wear resistant coatings which could be applied to either piston rings an or cylinder liners and provide, at 350{degree}C under lubricated conditions, coefficients of friction below 0.1 and wear rates of less than 25 {times} lO{sup {minus}6} mm/hour. The processes selected for applying the candidate wear resistant coatings to piston rings and/or cylinder liners were plasma spraying, chemical vapor, physical vapor and low temperature arc vapor deposition techniques as well as enameling techniques.

  14. Coupled information diffusion--pest dynamics models predict delayed benefits of farmer cooperation in pest management programs.

    Science.gov (United States)

    Rebaudo, François; Dangles, Olivier

    2011-10-01

    Worldwide, the theory and practice of agricultural extension system have been dominated for almost half a century by Rogers' "diffusion of innovation theory". In particular, the success of integrated pest management (IPM) extension programs depends on the effectiveness of IPM information diffusion from trained farmers to other farmers, an important assumption which underpins funding from development organizations. Here we developed an innovative approach through an agent-based model (ABM) combining social (diffusion theory) and biological (pest population dynamics) models to study the role of cooperation among small-scale farmers to share IPM information for controlling an invasive pest. The model was implemented with field data, including learning processes and control efficiency, from large scale surveys in the Ecuadorian Andes. Our results predict that although cooperation had short-term costs for individual farmers, it paid in the long run as it decreased pest infestation at the community scale. However, the slow learning process placed restrictions on the knowledge that could be generated within farmer communities over time, giving rise to natural lags in IPM diffusion and applications. We further showed that if individuals learn from others about the benefits of early prevention of new pests, then educational effort may have a sustainable long-run impact. Consistent with models of information diffusion theory, our results demonstrate how an integrated approach combining ecological and social systems would help better predict the success of IPM programs. This approach has potential beyond pest management as it could be applied to any resource management program seeking to spread innovations across populations.

  15. Approaches and incentives to implement integrated pest management that addresses regional and environmental issues.

    Science.gov (United States)

    Brewer, Michael J; Goodell, Peter B

    2012-01-01

    Agricultural, environmental, and social and policy interests have influenced integrated pest management (IPM) from its inception. The first 50 years of IPM paid special attention to field-based management and market-driven decision making. Concurrently, IPM strategies became available that were best applied both within and beyond the bounds of individual fields and that also provided environmental benefits. This generated an incentives dilemma for farmers: selecting IPM activities for individual fields on the basis of market-based economics versus selecting IPM activities best applied regionally that have longer-term benefits, including environmental benefits, that accrue to the broader community as well as the farmer. Over the past several decades, public-supported incentives, such as financial incentives available to farmers from conservation programs for farms, have begun to be employed to encourage use of conservation techniques, including strategies with IPM relevance. Combining private investments with public support may effectively address the incentives dilemma when advanced IPM strategies are used regionally and provide public goods such as those benefiting resource conservation. This review focuses on adaptation of IPM to these broader issues, on transitions of IPM from primarily individual field-based decision making to coordinated community decision making, and on the form of partnerships needed to gain long-lasting regional and environmental benefits. Copyright © 2012 by Annual Reviews. All rights reserved.

  16. Development and empirical validation of symmetric component measures of multi-dimensional constructs

    DEFF Research Database (Denmark)

    Sørensen, Hans Eibe; Slater, Stanley F.

    2008-01-01

    Atheoretical measure purification may lead to construct deficient measures. The purpose of this paper is to provide a theoretically driven procedure for the development and empirical validation of symmetric component measures of multi-dimensional constructs. We place particular emphasis on establ...

  17. Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    International Nuclear Information System (INIS)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun

    2004-02-01

    The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds

  18. Development of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2004-02-15

    The objective of this research is to develop on efficient integrity evaluation technology and to investigate the applicability of the newly-developed technology such as internet-based cyber platform etc. to Nuclear Power Plant(NPP) components. The development of an efficient structural integrity evaluation system is necessary for safe operation of NPP as the increase of operating periods. Moreover, material test data as well as emerging structural integrity assessment technology are also needed for the evaluation of aged components. The following five topics are covered in this project: development of the wall-thinning evaluation program for nuclear piping; development of structural integrity evaluation criteria for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for major components of NPP; ingegration of internet-based cyber platform and integrity evaluation program for primary components of NPP; effects of aging on strength of dissimilar welds.

  19. Obstacles and Opportunities for Diffusion of Integrated Pest Management Strategies Reported by Bolivian Small-Scale Farmers and Agronomists

    DEFF Research Database (Denmark)

    Jørs, Erik; Aramayo, Antonio; Huici, Omar

    2017-01-01

    without expensive investments needed, and a higher quality of the products. A healthy and sustainable agricultural production should be promoted by support to farmers through IPM training, a certification, and better prices. Finding allies to such a promotion is not easy, though, according to both farmers...... for products grown with IPM compared with traditional agriculture being hindrances for a spread of IPM. Moreover, IPM requires some new practices not that easy to learn by farmers. In favor of IPM was an increasing awareness of the importance of a healthy and sustainable food production, easiness to try out...

  20. Health Benefits of Integrated Pest Management in Schools

    Science.gov (United States)

    The following documents describe the health case for School IPM.They describe what IPM is, and then summarize currently available research pointing to how pest control via IPM makes for a healthier school environment.

  1. Development of IPRO-ZONE to Determine Component Failure Modes Affected by a Fire Event

    International Nuclear Information System (INIS)

    Kang, Dae Il; Han, Sang Hoon

    2010-01-01

    A Fire PSA requires a PSA analyst to select internal initiating events and to determine component failure modes for fire occurrence event of each fire compartment. The component failure modes caused by a fire depend on the several factors. These factors are whether components and their relating equipment and cables are located at fire initiation and propagation compartments or not, fire effects on control and power cables for components and their relating equipment, designed failure modes of component, success criteria in a PSA model, etc. Up to the present, a PSA analyst has been manually determining component failure modes based on criteria mentioned above. This task is one of the difficult works required for fire PSA expertise. In addition, since it requires much information, a fire PSA analyst may have difficulty in maintaining consistency for determining the component failure modes and documentation for them. After determining the component failure modes, internal PSA basic events corresponding to the component failure modes are selected and fire events are modeled for the selected basic events if required. KAERI has been developing the IPRO-ZONE (interface program for constructing zone effect table) to determine component failure modes affected by a fire, to select the internal PSA basic events, and to generate fire events to be modeled. In this paper, we introduce the overview of the IPRO-ZONE and approaches for determining component failure modes implemented in the IPRO-ZONE

  2. Development of radiation hard components for ITER blanket remote handling system

    Energy Technology Data Exchange (ETDEWEB)

    Saito, Makiko, E-mail: saito.makiko@jaea.go.jp; Anzai, Katsunori; Maruyama, Takahito; Noguchi, Yuto; Ueno, Kenichi; Takeda, Nobukazu; Kakudate, Satoshi

    2016-11-01

    Highlights: • Clarify the components that will degrade by gamma ray irradiation. • Perform the irradiation tests to BRHS components. • Optimize the materials to increase the radiation hardness. - Abstract: The ITER blanket remote handling system (BRHS) will be operated in a high radiation environment (250 Gy/h max.) and must stably handle the blanket modules, which weigh 4.5 t and are more than 1.5 m in length, with a high degree of position and posture accuracy. The reliability of the system can be improved by reviewing the failure events of the system caused by high radiation. A failure mode and effects analysis (FMEA) identified failure modes and determined that lubricants, O-rings, and electric insulation cables were the dominant components affecting radiation hardness. Accordingly, we tried to optimize the lubricants and cables of the AC servo motors by using polyphenyl ether (PPE)-based grease and polyether ether ketone (PEEK), respectively. Materials containing radiation protective agents were also selected for the cable sheaths and O-rings to improve radiation hardness. Gamma ray irradiation tests were performed on these components and as a result, a radiation hardness of 8 MGy was achieved for the AC servo motors. On the other hand, to develop the radiation hardness and BRHS compatibility furthermore, the improvement of materials of cable and O ring were performed.

  3. Current status of research and development on remote maintenance for fusion components

    International Nuclear Information System (INIS)

    Takeda, Nobukazu; Kakudate, Satoshi; Nakahira, Masataka; Shibanuma, Kiyoshi

    2008-01-01

    There is a growing attention to remote maintenance of nuclear fusion reactors. Remote maintenance is planned in ITER tokamak to keep the health of in-vessel components like blankets and divertors. In this article, current status of the development in the remote maintenance equipments and methods, especially for ITER tokamak are reviewed. The newly developed vehicle type and boom type maintenance devices, manipulator, and transfer cask are illustrated. (J.P.N.)

  4. Helping farmers face the increasing complexity of decision-making for crop protection

    Directory of Open Access Journals (Sweden)

    Vittorio ROSSI

    2013-01-01

    Full Text Available The European Community Directive 128/2009 on the Sustainable Use of Pesticides establishes a strategy for the use of plant protection products (PPPs in the European Community so as to reduce risks to human health and the environment. Integrated Pest Management (IPM is a key component of this strategy, which will become mandatory in 2014. IPM is based on dynamic processes and requires decision-making at strategic, tactical, and operational levels. Relative to decision makers in conventional agricultural systems, decision makers in IPM systems require more knowledge and must deal with greater complexity. Different tools have been developed for supporting decision-making in plant disease control and include warning services, on-site devices, and decision support systems (DSSs. These decision-support tools operate at different spatial and time scales, are provided to users both by public and private sources, focus on different communication modes, and can support multiple options for delivering information to farmers. Characteristics, weaknesses, and strengths of these tools are described in this review. Also described are recently developed DSSs, which are characterised by: i holistic treatment of crop management problems (including pests, diseases, fertilisation, canopy management and irrigation; ii conversion of complex decision processes into simple and easy-to-understand ‘decision supports’; iii easy and rapid access through the Internet; and iv two-way communication between users and providers that make it possible to consider context-specific information. These DSSs are easy-to-use tools that perform complex tasks efficiently and effectively. The delivery of these DSSs via the Internet increases user accessibility, allows the DSSs to be updated easily and continuously (so that new knowledge can be rapidly and efficiently provided to farmers, and allows users to maintain close contact with providers.

  5. ITER plasma facing components, design and development

    International Nuclear Information System (INIS)

    Vieider, G.; Cardella, A.; Akiba, M.; Matera, R.; Watson, R.

    1991-01-01

    The paper summarizes the collaborative effort of the ITER Conceptual Design Activity (CDA) on Plasma Facing Components (PFC) which focused on the following main tasks: (a) The definition of basic design concepts for the First Wall (FW) and Divertor Plates (DP), (b) the analysis of the performance and likely lifetime of these PFC designs including the identification of major critical issues, (c) the start of R and D work giving already first results, and the definition of the required further R and D program to support the contemplated ITER Engineering Design Activity (EDA). From the ITER CDA effort on PFC it is mainly concluded that: (a) The expected PFC operating conditions lead to design solutions at the limit of present technology in particular for the divertor, which may constrain the overall machine performance, (b) the development of convincing PFC designs requires an intensified R and D effort both on PFC technology and plasma physics. (orig.)

  6. Static Feed Water Electrolysis Subsystem Testing and Component Development

    Science.gov (United States)

    Koszenski, E. P.; Schubert, F. H.; Burke, K. A.

    1983-01-01

    A program was carried out to develop and test advanced electrochemical cells/modules and critical electromechanical components for a static feed (alkaline electrolyte) water electrolysis oxygen generation subsystem. The accomplishments were refurbishment of a previously developed subsystem and successful demonstration for a total of 2980 hours of normal operation; achievement of sustained one-person level oxygen generation performance with state-of-the-art cell voltages averaging 1.61 V at 191 ASF for an operating temperature of 128F (equivalent to 1.51V when normalized to 180F); endurance testing and demonstration of reliable performance of the three-fluid pressure controller for 8650 hours; design and development of a fluid control assembly for this subsystem and demonstration of its performance; development and demonstration at the single cell and module levels of a unitized core composite cell that provides expanded differential pressure tolerance capability; fabrication and evaluation of a feed water electrolyte elimination five-cell module; and successful demonstration of an electrolysis module pressurization technique that can be used in place of nitrogen gas during the standby mode of operation to maintain system pressure and differential pressures.

  7. Assessment of ALWR passive safety system reliability. Phase 1: Methodology development and component failure quantification

    International Nuclear Information System (INIS)

    Hake, T.M.; Heger, A.S.

    1995-04-01

    Many advanced light water reactor (ALWR) concepts proposed for the next generation of nuclear power plants rely on passive systems to perform safety functions, rather than active systems as in current reactor designs. These passive systems depend to a great extent on physical processes such as natural circulation for their driving force, and not on active components, such as pumps. An NRC-sponsored study was begun at Sandia National Laboratories to develop and implement a methodology for evaluating ALWR passive system reliability in the context of probabilistic risk assessment (PRA). This report documents the first of three phases of this study, including methodology development, system-level qualitative analysis, and sequence-level component failure quantification. The methodology developed addresses both the component (e.g. valve) failure aspect of passive system failure, and uncertainties in system success criteria arising from uncertainties in the system's underlying physical processes. Traditional PRA methods, such as fault and event tree modeling, are applied to the component failure aspect. Thermal-hydraulic calculations are incorporated into a formal expert judgment process to address uncertainties in selected natural processes and success criteria. The first phase of the program has emphasized the component failure element of passive system reliability, rather than the natural process uncertainties. Although cursory evaluation of the natural processes has been performed as part of Phase 1, detailed assessment of these processes will take place during Phases 2 and 3 of the program

  8. Near term and long term materials issues and development needs for plasma interactive components

    International Nuclear Information System (INIS)

    Mattas, R.F.

    1986-01-01

    Plasma interactive components (PICs), including the first wall, limiter blades, divertor collector plates, halo scrapers, and RF launchers, are exposed to high particle fluxes that can result in high sputtering erosion rates and high heat fluxes. In addition, the materials in reactors are exposed to high neutron fluxes which will degrade the bulk properties. This severe environment will limit the materials and designs which can be used in fusion devices. In order to provide a reasonable degree of confidence that plasma interactive components will operate successfully, a comprehensive development program is needed. Materials research and development plays a key role in the successful development of PICs. The range of operating conditions along with a summary of the major issues for materials development is described. The areas covered include plasma/materials interactions, erosion/redeposition, baseline materials properties, fabrication, and irradiation damage effects. Candidate materials and materials development needs in the near term and long term are identified

  9. Iterative development of Stand Up Australia: a multi-component intervention to reduce workplace sitting

    Science.gov (United States)

    2014-01-01

    Background Sitting, particularly in prolonged, unbroken bouts, is widespread within the office workplace, yet few interventions have addressed this newly-identified health risk behaviour. This paper describes the iterative development process and resulting intervention procedures for the Stand Up Australia research program focusing on a multi-component workplace intervention to reduce sitting time. Methods The development of Stand Up Australia followed three phases. 1) Conceptualisation: Stand Up Australia was based on social cognitive theory and social ecological model components. These were operationalised via a taxonomy of intervention strategies and designed to target multiple levels of influence including: organisational structures (e.g. via management consultation), the physical work environment (via provision of height-adjustable workstations), and individual employees (e.g. via face-to-face coaching). 2) Formative research: Intervention components were separately tested for their feasibility and acceptability. 3) Pilot studies: Stand Up Comcare tested the integrated intervention elements in a controlled pilot study examining efficacy, feasibility and acceptability. Stand Up UQ examined the additional value of the organisational- and individual-level components over height-adjustable workstations only in a three-arm controlled trial. In both pilot studies, office workers’ sitting time was measured objectively using activPAL3 devices and the intervention was refined based on qualitative feedback from managers and employees. Results Results and feedback from participants and managers involved in the intervention development phases suggest high efficacy, acceptance, and feasibility of all intervention components. The final version of the Stand Up Australia intervention includes strategies at the organisational (senior management consultation, representatives consultation workshop, team champions, staff information and brainstorming session with information

  10. The Individual Regulation Component of Group Emotional Intelligence: Measure Development and Validation

    Science.gov (United States)

    Peterson, Christina Hamme

    2012-01-01

    Counseling work is increasingly conducted in team format. The methods counseling teams use to manage the emotional component of their group life, or their group emotional intelligence, have been proposed as significantly contributing to group member trust, cooperation, and ultimate performance. Item development, exploratory factor analysis, and…

  11. Morphology development during single droplet drying of mixed component formulations and milk

    NARCIS (Netherlands)

    Both, E.M.; Nuzzo, N.; Millqvist-Fureby, A.; Boom, R.M.; Schutyser, M.A.I.

    2018-01-01

    We report on the influence of selected components and their mixtures on the development of the morphology during drying of single droplets and extend the results to the morphology of whole milk powder particles. Sessile single droplet drying and acoustic levitation methods were employed to study

  12. Developments of integrity evaluation technology for pressurized components in nuclear power plant and IT based integrity evaluation system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Young Jin; Choi, Jae Boong; Shim, Do Jun [Sungkyunkwan Univ., Seoul (Korea, Republic of)] (and others)

    2003-03-15

    The objective of this research is to develop an efficient evaluation technology and to investigate applicability of newly-developed technology, such as internet-based cyber platform, to operating power plants. Development of efficient evaluation systems for Nuclear Power Plant components, based on structural integrity assessment techniques, are increasingly demanded for safe operation with the increasing operating period of Nuclear Power Plants. The following five topics are covered in this project: development of assessment method for wall-thinned nuclear piping based on pipe test; development of structural integrity program for steam generator tubes with cracks of various shape; development of fatigue life evaluation system for mam components of NPP; development of internet-based cyber platform and integrity program for primary components of NPP; effect of aging on strength of dissimilar welds.

  13. Exploring the temporal development of childhood IgE profiles to allergen components

    Directory of Open Access Journals (Sweden)

    Önell Annica

    2012-12-01

    Full Text Available Abstract Background Children often develop allergies that may or not persist into adulthood. Although the different allergic symptoms over time have been well documented, the underlying pattern of sensitization to various proteins and subsequent allergy development is unexplored. The aim was to study the sensitization pattern to allergen components over time from infancy to adulthood in a group of infants with heredity for allergic diseases. Methods IgE profiles were monitored in a group of 67 children from 6 months to 18 years using a microarray chip (ImmunoCAP® ISAC containing 103 allergen components derived from 47 allergen sources. The chip IgE profile was compared with clinical history, skin prick test results and diagnoses (atopic dermatitis, asthma and allergic rhinoconjunctivitis at each time point for each child. Results IgE profiles were unique for each child and showed broad agreement with the results of skin prick tests and doctors’ diagnoses. In addition, close examination of the IgE profiles often revealed early indication of subsequent allergies. IgE profiles also facilitated the examination of cross-reactivity contra co-sensitization, thereby greatly enhancing the possibility for managing patients. Conclusion This explorative description indicates that sensitization pattern to allergen components differs over time as well as among allergic individuals when examined with microarray technology.

  14. Development of in-service inspection plans for nuclear components at the Surry 1 nuclear power station

    International Nuclear Information System (INIS)

    Vo, T.V.; Simonen, F.A.; Doctor, S.R.; Smith, B.W.; Gore, B.F.

    1993-01-01

    As part of the nondestructive evaluation reliability program sponsored by the US Nuclear Regulatory Commission at Pacific Northwest Laboratory, a methodology has been developed for establishing in-service inspection priorities of nuclear power plant components. The method uses results of probabilistic risk assessment in conjunction with the techniques of failure modes and effects analysis to identify and prioritize the most risk-important systems and components for inspection at nuclear power plants. Surry nuclear power station unit 1 was selected for demonstrating the methodology. The specific systems selected for analysis were the reactor pressure vessel, the reactor coolant, the low pressure injection including the accumulators, and the auxiliary feedwater. The results provide a risk-based ranking of components that can be used to establish a prioritization of the components and a basis for developing improved in-service inspection plans at nuclear power plants

  15. Environmental Engineering Approaches toward Sustainable Management of Spider Mites.

    Science.gov (United States)

    Suzuki, Takeshi

    2012-10-26

    Integrated pest management (IPM), which combines physical, biological, and chemical control measures to complementary effect, is one of the most important approaches to environmentally friendly sustainable agriculture. To expand IPM, we need to develop new pest control measures, reinforce existing measures, and investigate interactions between measures. Continued progress in the development of environmental control technologies and consequent price drops have facilitated their integration into plant production and pest control. Here I describe environmental control technologies for the IPM of spider mites through: (1) the disturbance of photoperiod-dependent diapause by artificial light, which may lead to death in seasonal environments; (2) the use of ultraviolet radiation to kill or repel mites; and (3) the use of water vapor control for the long-term cold storage of commercially available natural enemies. Such environmental control technologies have great potential for the efficient control of spider mites through direct physical effects and indirect effects via natural enemies.

  16. Development of Prototype HTS Components for Magnetic Suspension Applications

    Science.gov (United States)

    Haldar, P.; Hoehn, J., Jr.; Selvamanickam, V.; Farrell, R. A.; Balachandran, U.; Iyer, A. N.; Peterson, E.; Salazar, K.

    1996-01-01

    We have concentrated on developing prototype lengths of bismuth and thallium based silver sheathed superconductors by the powder-in-tube approach to fabricate high temperature superconducting (HTS) components for magnetic suspension applications. Long lengths of mono and multi filament tapes are presently being fabricated with critical current densities useful for maglev and many other applications. We have recently demonstrated the prototype manufacture of lengths exceeding 1 km of Bi-2223 multi filament conductor. Long lengths of thallium based multi-filament conductor have also been fabricated with practical levels of critical current density and improved field dependence behavior. Test coils and magnets have been built from these lengths and characterized over a range of temperatures and background fields to determine their performance. Work is in progress to develop, fabricate and test HTS windings that will be suitable for magnetic suspension, levitation and other electric power related applications.

  17. Relative and absolute components of leapfrogging in mobile phones by developing countries

    NARCIS (Netherlands)

    James, M.J.

    This paper suggests a novel way of measuring the important concept of leapfrogging in mobile phones. It argues that an adequate measure of leapfrogging needs to include absolute as well as relative components. The new measure is used to measure the performance of around 60 developing countries and

  18. Innovative Research on the Development of Game-based Tourism Information Services Using Component-based Software Engineering

    Directory of Open Access Journals (Sweden)

    Wei-Hsin Huang

    2018-02-01

    Full Text Available In recent years, a number of studies have been conducted exploring the potential of digital tour guides, that is, multimedia components (e.g., 2D graphic, 3D models, and sound effects that can be integrated into digital storytelling with location-based services. This study uses component-based software engineering to develop the content of game-based tourism information services. The results of this study are combined with 3D VR/AR technology to implement the digital 2D/3D interactive tour guide and show all the attractions’ information on a service platform for the gamification of cultural tourism. Nine kinds of game templates have been built in the component module. Five locations have completed indoor or external 3D VR real scenes and provide online visitors with a virtual tour of the indoor or outdoor attractions. The AR interactive work has three logos. The interactive digital guide includes animated tour guides, interactive guided tours, directions and interactive guides. Based on the usage analysis of the component databases built by this study, VR game types are suited to object-oriented game templates, such as the puzzle game template and the treasure hunt game template. Background music is the database component required for each game. The icons and cue tones are the most commonly used components in 2D graphics and sound effects, but the icons are gathered in different directions to approximate the shape of the component to be consistent. This study built a vivid story of a scene tour for online visitors to enhance the interactive digital guide. However, the developer can rapidly build new digital guides by rearranging the components of the modules to shorten the development time by taking advantage of the usage frequency of various databases that have been built by this study to effectively continue to build and expand the database components. Therefore, more game-based digital tour guides can be created to make better defined high

  19. Micropolarity and Hydrogen-Bond Donor Ability of Environmentally Friendly Anionic Reverse Micelles Explored by UV/Vis Absorption of a Molecular Probe and FTIR Spectroscopy.

    Science.gov (United States)

    Girardi, Valeria R; Silber, Juana J; Falcone, Ruben Darío; Correa, N Mariano

    2018-03-19

    In the present work we show how two biocompatible solvents, methyl laurate (ML) and isopropyl myristate (IPM), can be used as a less toxic alternative to replace the nonpolar component in a sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT) reverse micelles (RMs) formulation. In this sense, the micropolarity and the hydrogen-bond ability of the interface were monitored through the use of the solvatochromism of a molecular probe (1-methyl-8-oxyquinolinium betaine, QB) and Fourier transform infrared spectroscopy (FTIR). Our results demonstrate that the micropolarity sensed by QB in ML RMs is lower than in IPM RMs. Additionally, the water molecules form stronger H-bond interactions with the polar head of AOT in ML than in IPM. By FTIR was revealed that more water molecules interact with the interface in ML/AOT RMs. On the other hand, for AOT RMs generated in IPM, the weaker water-surfactant interaction allows the water molecules to establish hydrogen bonds with each other trending to bulk water more easily than in ML RMs, a consequence of the dissimilar penetration of nonpolar solvents into the interfacial region. The penetration process is strongly controlled by the polarity and viscosity of the external solvents. All of these results allow us to characterize these biocompatible systems, providing information about interfacial properties and how they can be altered by changing the external solvent. The ability of the nontoxic solvent to penetrate or not into the AOT interface produces a new interface with attractive properties. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Development of high thermal flux components for continuous operation in Tokamaks

    International Nuclear Information System (INIS)

    Schlosser, J.; Chappuis, P.; Coston, J.F.; Deschamps, P.; Lipa, M.

    1991-01-01

    High heat flux plasma facing components are under development and appropriate experimental evaluations have been carried out in order to operate during cycles of several hundred seconds. In Tore Supra, a large tokamak with a plasma nominal duration in excess of 30 seconds, solutions are tested that could be later applied to the NET/ITER tokamak, where peaked heat flux values of 15 MW/m 2 on the divertor plates are foreseen. The proposed concept is a swirl square tube design protected with brazed CFC flat tiles. Development programs and validation tests are presented. The tests results are compared with calculations

  1. Integrated Fruit Production and Pest Management in Europe: The Apple Case Study and How Far We Are From the Original Concept?

    Science.gov (United States)

    Damos, Petros; Escudero Colomar, Lucía-Adriana; Ioriatti, Claudio

    2015-01-01

    This review focuses on the process of adapting the original concept of Integrated Pest Management (IPM) to the wider conception of the Integrated Fruit Production (IFP) implemented in Europe. Even though most of the pest management strategies still rely on the use of synthetic pesticides, a wide array of innovative and environmentally friendly tools are now available as possible alternative to the pesticides within the modern apple production system. We also highlight how recent pest management strategies and tools have created an opening for research towards IPM improvement, including the use of biorational pesticides, semiochemicals and biological control. Forecasting models, new tree training systems and innovative spray equipment have also been developed to improve treatment coverage, to mitigate pesticide drift and to reduce chemical residues on fruits. The possible threats that jeopardize the effective implementation of IPM and particularly the risks related to the development of the pesticide resistance and the introduction of new invasive pests are also reviewed. With the directive 128/09, the European legislation recognizes IPM as a strategic approach for the sustainable use of pesticides. Within this context, IPM and related guidelines is called to meet different areas of concern in relation to the worker and bystander safety. Beside the traditional economic criteria of the market-oriented agriculture, sustainable agriculture includes the assessment of the environmental impact of the agronomic practices within the societal context where they take place. As a consequence of the raising consumer concerns about environmental impacts generated by the fruit production, IFP certification over product standards, including process aspects, are frequently required by consumers and supermarket chains. PMID:26463407

  2. Integrated Fruit Production and Pest Management in Europe: The Apple Case Study and How Far We Are From the Original Concept?

    Science.gov (United States)

    Damos, Petros; Colomar, Lucía-Adriana Escudero; Ioriatti, Claudio

    2015-06-26

    This review focuses on the process of adapting the original concept of Integrated Pest Management (IPM) to the wider conception of the Integrated Fruit Production (IFP) implemented in Europe. Even though most of the pest management strategies still rely on the use of synthetic pesticides, a wide array of innovative and environmentally friendly tools are now available as possible alternative to the pesticides within the modern apple production system. We also highlight how recent pest management strategies and tools have created an opening for research towards IPM improvement, including the use of biorational pesticides, semiochemicals and biological control. Forecasting models, new tree training systems and innovative spray equipment have also been developed to improve treatment coverage, to mitigate pesticide drift and to reduce chemical residues on fruits. The possible threats that jeopardize the effective implementation of IPM and particularly the risks related to the development of the pesticide resistance and the introduction of new invasive pests are also reviewed. With the directive 128/09, the European legislation recognizes IPM as a strategic approach for the sustainable use of pesticides. Within this context, IPM and related guidelines is called to meet different areas of concern in relation to the worker and bystander safety. Beside the traditional economic criteria of the market-oriented agriculture, sustainable agriculture includes the assessment of the environmental impact of the agronomic practices within the societal context where they take place. As a consequence of the raising consumer concerns about environmental impacts generated by the fruit production, IFP certification over product standards, including process aspects, are frequently required by consumers and supermarket chains.

  3. Integrated Fruit Production and Pest Management in Europe: The Apple Case Study and How Far We Are From the Original Concept?

    Directory of Open Access Journals (Sweden)

    Petros Damos

    2015-06-01

    Full Text Available This review focuses on the process of adapting the original concept of Integrated Pest Management (IPM to the wider conception of the Integrated Fruit Production (IFP implemented in Europe. Even though most of the pest management strategies still rely on the use of synthetic pesticides, a wide array of innovative and environmentally friendly tools are now available as possible alternative to the pesticides within the modern apple production system. We also highlight how recent pest management strategies and tools have created an opening for research towards IPM improvement, including the use of biorational pesticides, semiochemicals and biological control. Forecasting models, new tree training systems and innovative spray equipment have also been developed to improve treatment coverage, to mitigate pesticide drift and to reduce chemical residues on fruits. The possible threats that jeopardize the effective implementation of IPM and particularly the risks related to the development of the pesticide resistance and the introduction of new invasive pests are also reviewed. With the directive 128/09, the European legislation recognizes IPM as a strategic approach for the sustainable use of pesticides. Within this context, IPM and related guidelines is called to meet different areas of concern in relation to the worker and bystander safety. Beside the traditional economic criteria of the market-oriented agriculture, sustainable agriculture includes the assessment of the environmental impact of the agronomic practices within the societal context where they take place. As a consequence of the raising consumer concerns about environmental impacts generated by the fruit production, IFP certification over product standards, including process aspects, are frequently required by consumers and supermarket chains.

  4. Design and Performance Improvement of AC Machines Sharing a Common Stator

    Science.gov (United States)

    Guo, Lusu

    discussed in this dissertation. In the design stage, an optimization method based on orthogonal experimental design will be introduced. Besides, a universal current profiling technique is proposed to minimize the torque pulsation along with the stator copper losses in modular interior permanent magnet motors. Instead of sinusoidal current waveforms, this algorithm will calculate the proper currents which can minimize the torque pulsation. Finite element analysis and Matlab programing will be used to develop this optimal current profiling algorithm. Permanent magnet machines are becoming more attractive in some modern traction applications, such as traction motors and generators for an electrified vehicle. The operating speed or the load condition in these applications may be changing all the time. Compared to electric machines used to operate at a constant speed and constant load, better control performance is required. In this dissertation, a novel model reference adaptive control (MRAC) used on five-phase interior permanent magnet motor drives is presented. The primary controller is designed based on artificial neural network (ANN) to simulate the nonlinear characteristics of the system without knowledge of accurate motor model or parameters. The proposed motor drive decouples the torque and flux components of five-phase IPM motors by applying a multiple reference frame transformation. Therefore, the motor can be easily driven below the rated speed with the maximum torque per ampere (MTPA) operation or above the rated speed with the flux weakening operation. The ANN based primary controller consists of a radial basis function (RBF) network which is trained on-line to adapt system uncertainties. The complete IPM motor drive is simulated in Matlab/Simulink environment and implemented experimentally utilizing dSPACE DS1104 DSP board on a five-phase prototype IPM motor. The proposed model reference adaptive control method has been applied on the commons stator SynRM and IPM

  5. EPA Releases Update to Popular School Integrated Pest Management Publication

    Science.gov (United States)

    An updated version reflects recent innovations in school IPM, provides links to new information, and has been redesigned into an easily printable format. It provides an overview of IPM and details the steps a school can follow to establish an IPM program.

  6. Economic evaluation of an area-wide integrated pest management program to control the Asian tiger mosquito in New Jersey.

    Directory of Open Access Journals (Sweden)

    Donald S Shepard

    Full Text Available Aedes albopictus is the most invasive mosquito in the world, an important disease vector, and a biting nuisance that limits outdoor activities. Area-wide integrated pest management (AW-IPM is the recommended control strategy. We conducted an economic evaluation of the AW-IPM project in Mercer and Monmouth Counties, New Jersey with a controlled design (AW-IPM vs. control from 2009 through 2011. The study analyzed financial documents and staff time for AW-IPM and surveyed an average of 415 randomly chosen households in AW-IPM and control areas each fall from 2008 through 2011. Hours lost from yard and porch activities were calculated as differences between actual and potential hours of these activities in an average summer week if there had been no mosquito concerns. Net estimated benefits of AW-IPM were based on cross-over and difference-in-difference analyses. Reductions in hours lost were valued based on respondents' willingness to pay for a hypothetical extra hour free of mosquitoes spent on yard or porch activities and literature on valuation of a quality adjusted life year (QALY. The incremental cost of AW-IPM per adult was $41.18 per year. Number of hours lost due to mosquitoes in AW-IPM areas between the base year (2008 and the intervention years (2009-2011 declined by 3.30 hours per summer week in AW-IPM areas compared to control areas. Survey respondents valued this improvement at $27.37 per adult per summer week. Over the 13-week summer, an average adult resident gained 42.96 hours of yard and porch time, worth $355.82. The net benefit over the summer was $314.63. With an average of 0.0027 QALYs gained per adult per year, AW-IPM was cost effective at $15,300 per QALY gained. The benefit-cost ratio from hours gained was 8.64, indicating that each $1 spent on AW-IPM gave adults additional porch and yard time worth over $8.

  7. Economic evaluation of an area-wide integrated pest management program to control the Asian tiger mosquito in New Jersey.

    Science.gov (United States)

    Shepard, Donald S; Halasa, Yara A; Fonseca, Dina M; Farajollahi, Ary; Healy, Sean P; Gaugler, Randy; Bartlett-Healy, Kristen; Strickman, Daniel A; Clark, Gary G

    2014-01-01

    Aedes albopictus is the most invasive mosquito in the world, an important disease vector, and a biting nuisance that limits outdoor activities. Area-wide integrated pest management (AW-IPM) is the recommended control strategy. We conducted an economic evaluation of the AW-IPM project in Mercer and Monmouth Counties, New Jersey with a controlled design (AW-IPM vs. control) from 2009 through 2011. The study analyzed financial documents and staff time for AW-IPM and surveyed an average of 415 randomly chosen households in AW-IPM and control areas each fall from 2008 through 2011. Hours lost from yard and porch activities were calculated as differences between actual and potential hours of these activities in an average summer week if there had been no mosquito concerns. Net estimated benefits of AW-IPM were based on cross-over and difference-in-difference analyses. Reductions in hours lost were valued based on respondents' willingness to pay for a hypothetical extra hour free of mosquitoes spent on yard or porch activities and literature on valuation of a quality adjusted life year (QALY). The incremental cost of AW-IPM per adult was $41.18 per year. Number of hours lost due to mosquitoes in AW-IPM areas between the base year (2008) and the intervention years (2009-2011) declined by 3.30 hours per summer week in AW-IPM areas compared to control areas. Survey respondents valued this improvement at $27.37 per adult per summer week. Over the 13-week summer, an average adult resident gained 42.96 hours of yard and porch time, worth $355.82. The net benefit over the summer was $314.63. With an average of 0.0027 QALYs gained per adult per year, AW-IPM was cost effective at $15,300 per QALY gained. The benefit-cost ratio from hours gained was 8.64, indicating that each $1 spent on AW-IPM gave adults additional porch and yard time worth over $8.

  8. Optimal Application Timing of Pest Control Tactics in Nonautonomous Pest Growth Model

    OpenAIRE

    Zhang, Shujuan; Liang, Juhua; Tang, Sanyi

    2014-01-01

    Considering the effects of the living environment on growth of populations, it is unrealistic to assume that the growth rates of predator and prey are all constants in the models with integrated pest management (IPM) strategies. Therefore, a nonautonomous predator-prey system with impulsive effect is developed and investigated in the present work. In order to determine the optimal application timing of IPM tactics, the threshold value which guarantees the stability of pest-free periodic solut...

  9. Elucidation of penetration enhancement mechanism of Emu oil using FTIR microspectroscopy at EMIRA laboratory of SESAME synchrotron

    Science.gov (United States)

    Mansour, Randa S. H.; Sallam, Alsayed A.; Hamdan, Imad I.; Khalil, Enam A.; Yousef, Ibraheem

    2017-10-01

    It has been proposed that Emu oil possesses skin permeation-enhancing effect. This study aimed to address its possible penetration enhancement mechanism(s) using IR microscopy, in accordance with LPP theory. The penetration of Emu oil through the layers of human skin was accomplished by monitoring oil-IR characteristic feature at 3006 cm- 1. The unsaturated components of Emu oil accumulated at about 270 μm depth of skin surface. The interaction of Emu oil with lipid and protein constituents of SC was investigated in comparison with a commonly used enhancer, IPM. Inter-sample spectral differences were identified using PCA and linked with possible enhancement mechanisms. Emu oil treatment caused a change in the slope of the right contour of amide I band of the protein spectral range. This was also clear in the second derivative spectra where the emergence of a new shoulder at higher frequency was evident, suggesting disorganization of keratin α-helix structure. This effect could be a result of disruption of some hydrogen bonds in which amide Cdbnd O and Nsbnd H groups of keratin are involved. The low intensity of the emerged shoulder is also in agreement with formation of weaker hydrogen bonds. IPM did not affect the protein component. No conclusions regarding the effect of penetration enhancers on the SC lipids were obtained. This was due to the overlap of the endogenous (skin) and exogenous (oil) CH stretching and scissoring frequencies. The SC carbonyl stretching peak disappeared as a result of IPM treatment which may reflect some degree of lipid extraction.

  10. Youth and Families with Promise: A Multi-Component Youth Development Program

    Directory of Open Access Journals (Sweden)

    Brian J. Higginbotham

    2007-03-01

    Full Text Available Integrating mentoring into existing youth programs has been suggested as a promising approach to youth development. This article discusses a theoretical rationale underlying the integration of one-on-one mentoring into established youth development programs. From an ecological perspective, the addition of mentoring into traditional programs should theoretically enhance the youth development experience. Mentoring, in addition to programs like 4-H, enriches the context in which developing youth are supported and encouraged by non-parental adults to develop competencies, to take on leadership responsibilities, and to integrate into positive peer groups (i.e., 4-H clubs. A multi-component program that involves at-risk youth in both mentoring and 4-H activities is highlighted. Results from at-risk youth and their parents indicate that Utah’s 4-H/ Mentoring: Youth and Families with Promise program strengthens the protective factors of academic achievement, social competence, and family bonds.

  11. Decomposition Technology Development of Organic Component in a Decontamination Waste Solution

    International Nuclear Information System (INIS)

    Jung, Chong Hun; Oh, W. Z.; Won, H. J.; Choi, W. K.; Kim, G. N.; Moon, J. K.

    2007-11-01

    Through the project of 'Decomposition Technology Development of Organic Component in a Decontamination Waste Solution', the followings were studied. 1. Investigation of decontamination characteristics of chemical decontamination process 2. Analysis of COD, ferrous ion concentration, hydrogen peroxide concentration 3. Decomposition tests of hardly decomposable organic compounds 4. Improvement of organic acid decomposition process by ultrasonic wave and UV light 5. Optimization of decomposition process using a surrogate decontamination waste solution

  12. Web components and the semantic web

    OpenAIRE

    Casey, Maire; Pahl, Claus

    2003-01-01

    Component-based software engineering on the Web differs from traditional component and software engineering. We investigate Web component engineering activites that are crucial for the development,com position, and deployment of components on the Web. The current Web Services and Semantic Web initiatives strongly influence our work. Focussing on Web component composition we develop description and reasoning techniques that support a component developer in the composition activities,fo cussing...

  13. Modern condition and possibilities of development of a moral component in a target orientation of the teenager

    Directory of Open Access Journals (Sweden)

    Shylova Nina Ihorivna

    2016-10-01

    Full Text Available The article considers the basic criteria of a moral component in a target orientation of the teenager, whose level of development being defined through the testing of pupils in Mykolaiv city. The article present the results given by the usage of two techniques, defines the ways and prospects of the further development of a moral component in a target orientation of teenagers.

  14. Hyperspectral Cubesat Constellation for Rapid Natural Hazard Response

    Science.gov (United States)

    Mandl, D.; Huemmrich, K. F.; Ly, V. T.; Handy, M.; Ong, L.; Crum, G.

    2015-12-01

    With the advent of high performance space networks that provide total coverage for Cubesats, the paradigm for low cost, high temporal coverage with hyperspectral instruments becomes more feasible. The combination of ground cloud computing resources, high performance with low power consumption onboard processing, total coverage for the cubesats and social media provide an opprotunity for an architecture that provides cost-effective hyperspectral data products for natural hazard response and decision support. This paper provides a series of pathfinder efforts to create a scalable Intelligent Payload Module(IPM) that has flown on a variety of airborne vehicles including Cessna airplanes, Citation jets and a helicopter and will fly on an Unmanned Aerial System (UAS) hexacopter to monitor natural phenomena. The IPM's developed thus far were developed on platforms that emulate a satellite environment which use real satellite flight software, real ground software. In addition, science processing software has been developed that perform hyperspectral processing onboard using various parallel processing techniques to enable creation of onboard hyperspectral data products while consuming low power. A cubesat design was developed that is low cost and that is scalable to larger consteallations and thus can provide daily hyperspectral observations for any spot on earth. The design was based on the existing IPM prototypes and metrics that were developed over the past few years and a shrunken IPM that can perform up to 800 Mbps throughput. Thus this constellation of hyperspectral cubesats could be constantly monitoring spectra with spectral angle mappers after Level 0, Level 1 Radiometric Correction, Atmospheric Correction processing. This provides the opportunity daily monitoring of any spot on earth on a daily basis at 30 meter resolution which is not available today.

  15. Photonic integration and components development for a Ku-band phased array antenna system

    NARCIS (Netherlands)

    Marpaung, D.A.I.; Zhuang, L.; Burla, M.; Roeloffzen, C.G.H.; Noharet, Bertrand; Wang, Qin; Beeker, W.P.; Beeker, Willem; Leinse, Arne; Heideman, Rene

    2011-01-01

    In this paper the development of a phased array antenna system using a photonic beamformer is reported. The paper emphasizes on the photonic integration between two main components of the beamformer, namely the photonic beamformer chip and the electroabsorption modulator array. System level

  16. Decomposition Technology Development of Organic Component in a Decontamination Waste Solution

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Chong Hun; Oh, W. Z.; Won, H. J.; Choi, W. K.; Kim, G. N.; Moon, J. K

    2007-11-15

    Through the project of 'Decomposition Technology Development of Organic Component in a Decontamination Waste Solution', the followings were studied. 1. Investigation of decontamination characteristics of chemical decontamination process 2. Analysis of COD, ferrous ion concentration, hydrogen peroxide concentration 3. Decomposition tests of hardly decomposable organic compounds 4. Improvement of organic acid decomposition process by ultrasonic wave and UV light 5. Optimization of decomposition process using a surrogate decontamination waste solution.

  17. Advancing population ecology with integral projection models: a practical guide

    DEFF Research Database (Denmark)

    Merow, Cory; Dahlgren, Johan; Metcall, C. Jessica E.

    2014-01-01

    (e.g., environment). By combining regressions of vital rates, an IPM provides mechanistic insight into emergent ecological patterns such as population dynamics, species geographic distributions, or life history strategies. Here, we review important resources for building IPMs and provide...... a comprehensive guide, with extensive R code, for their construction. IPMs can be applied to any stage-structured population; here we illustrate IPMs for a series of plant life histories of increasing complexity and biological realism, highlighting the utility of various regression methods for capturing...

  18. A hybrid analytical model for open-circuit field calculation of multilayer interior permanent magnet machines

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Zhen [School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072 (China); Xia, Changliang [School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072 (China); Tianjin Engineering Center of Electric Machine System Design and Control, Tianjin 300387 (China); Yan, Yan, E-mail: yanyan@tju.edu.cn [School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072 (China); Geng, Qiang [Tianjin Engineering Center of Electric Machine System Design and Control, Tianjin 300387 (China); Shi, Tingna [School of Electrical Engineering and Automation, Tianjin University, Tianjin 300072 (China)

    2017-08-01

    Highlights: • A hybrid analytical model is developed for field calculation of multilayer IPM machines. • The rotor magnetic field is calculated by the magnetic equivalent circuit method. • The field in the stator and air-gap is calculated by subdomain technique. • The magnetic scalar potential on rotor surface is modeled as trapezoidal distribution. - Abstract: Due to the complicated rotor structure and nonlinear saturation of rotor bridges, it is difficult to build a fast and accurate analytical field calculation model for multilayer interior permanent magnet (IPM) machines. In this paper, a hybrid analytical model suitable for the open-circuit field calculation of multilayer IPM machines is proposed by coupling the magnetic equivalent circuit (MEC) method and the subdomain technique. In the proposed analytical model, the rotor magnetic field is calculated by the MEC method based on the Kirchhoff’s law, while the field in the stator slot, slot opening and air-gap is calculated by subdomain technique based on the Maxwell’s equation. To solve the whole field distribution of the multilayer IPM machines, the coupled boundary conditions on the rotor surface are deduced for the coupling of the rotor MEC and the analytical field distribution of the stator slot, slot opening and air-gap. The hybrid analytical model can be used to calculate the open-circuit air-gap field distribution, back electromotive force (EMF) and cogging torque of multilayer IPM machines. Compared with finite element analysis (FEA), it has the advantages of faster modeling, less computation source occupying and shorter time consuming, and meanwhile achieves the approximate accuracy. The analytical model is helpful and applicable for the open-circuit field calculation of multilayer IPM machines with any size and pole/slot number combination.

  19. Pest Private Eye: Using an Interactive Role-Playing Video Game to Teach about Pests and Integrated Pest Management

    Science.gov (United States)

    Bauer, Erin; Ogg, Clyde

    2011-01-01

    The trend toward encouraging adoption of Integrated Pest Management (IPM) in schools has increased in the last decade. Because IPM helps reduce risk of human pesticide exposure, reduce allergens and asthma triggers, save energy, and protect the environment, it's essential that IPM awareness continue not only with current school administrators,…

  20. Appreciation of the nature of light demands enhancement over the prevailing scientific epistemology

    Science.gov (United States)

    Roychoudhuri, Chandrasekhar

    2011-09-01

    Based on attempts to resolve the problem of various self contradictory assumptions behind the prevailing belief on single photon interference, we have analyzed the process steps behind our experimental measurements and named the process as the Interaction Process Mapping Epistemology (IPM-E). This has helped us recognize that the quantum mechanical Measurement Problem has a much universal and deeper root in nature. Our scientific theorization process suffers from a Perpetual Information Challenge (PIC), which cannot be overcome by elegant and/or sophisticated mathematical theories alone. Iterative imaginative application of IPM-E needs to be used as a metaphorical analytical continuation to fill up the missing information gaps. IPM-E has also guided us to recognize the generic NIW-principle (Non-Interaction of Waves) in the linear domain, not explicitly recognized in current books and literature. Superposition effects become manifest through light-matter interactions. Detecting dipoles gets stimulated by multiple superposed beams; it sums the simultaneous multiple stimulations into a single resultant undulation, which then guides the resultant energy exchange. The consequent transformation in the detector corresponds to observed fringes. They neither represent interference of light; nor represent selective arrival or non-arrival of photons on the detector. Photons do not possess any force of mutual interaction to generate their redistribution. Implementation of IPM-E requires us to recognize our subjective interpretation propensity with which we are burdened due to our evolutionary successes.

  1. A proposal to develop a high temperature structural design guideline for HTGR components

    International Nuclear Information System (INIS)

    Hada, K.

    1989-01-01

    This paper presents some proposals for developing a high-temperature structural design guideline for HTGR structural components. It is appropriate that a basis for developing high-temperature structural design rules is rested on well-established elevated-temperature design guidelines, if the same failure modes are expected for high-temperature components as considered in such design guidelines. As for the applicability of ASME B and PV Code Case N-47 to structural design rules for high-temperature components (service temperatures ≥ 900 deg. C), the following critical issues on material properties and service life evaluation rules have been pointed out. (i) no work-hardening of stress-strain curves at high temperatures due to dynamic recrystallization; (ii) issues relating to very significant creep; (iii) ductility loss after long-term ageing at high temperatures; (iv) validity of life-fraction rule (Robinson-Taira rule) as creep-fatigue damage evaluation rule. Furthermore, the validity of design margins of elevated-temperature structural design guidelines to high-temperature design rules should be clarified. Solutions and proposals to these issues are presented in this paper. Concerning no work-hardening due to dynamic recrystallization, it is shown that viscous effects cannot be neglected even at high extension rate for tensile tests, and that changes in viscous deformation rates by dynamic recrystallization should be taken into account. The extension rate for tensile tests is proposed to change at high temperatures. The solutions and proposals to the above-mentioned issues lead to the conclusion that the design methodologies of N-47 are basically applicable to the high-temperature structural design guideline for HTGR structural components in service at about 900 deg. C. (author). 9 refs, 5 figs

  2. 3D microcomputer tomograph for materials development and testing of components

    International Nuclear Information System (INIS)

    Riesemeier, H.; Goebbels, J.; Illerhaus, B.; Onel, Y.; Reimers, P.

    1993-01-01

    Examples prove the great capacity of 3D microcomputerized tomography in characterising new materials, particularly in the development stage. Cracks and delamination after deliberate damage are shown with good resolution. In showing complex structures, the possibility of picture reproduction of any sectional plane is of great use. 3D microcomputer tomography is therefore a futuristic process in materials research and for small of component series in production, eg: in the aircraft and space industry. (orig./DG) [de

  3. Development of impact design methods for ceramic gas turbine components

    Science.gov (United States)

    Song, J.; Cuccio, J.; Kington, H.

    1990-01-01

    Impact damage prediction methods are being developed to aid in the design of ceramic gas turbine engine components with improved impact resistance. Two impact damage modes were characterized: local, near the impact site, and structural, usually fast fracture away from the impact site. Local damage to Si3N4 impacted by Si3N4 spherical projectiles consists of ring and/or radial cracks around the impact point. In a mechanistic model being developed, impact damage is characterized as microcrack nucleation and propagation. The extent of damage is measured as volume fraction of microcracks. Model capability is demonstrated by simulating late impact tests. Structural failure is caused by tensile stress during impact exceeding material strength. The EPIC3 code was successfully used to predict blade structural failures in different size particle impacts on radial and axial blades.

  4. Directions for memory hierarchies and their components: research and development

    International Nuclear Information System (INIS)

    Smith, A.J.

    1978-10-01

    The memory hierarchy is usually the largest identifiable part of a computer system and making effective use of it is critical to the operation and use of the system. The levels of such a memory hierarchy are considered and the state of the art and likely directions for both research and development are described. Algorithmic and logical features of the hierarchy not directly associated with specific components are also discussed. Among the problems believed to be the most significant are the following: (a) evaluate the effectiveness of gap filler technology as a level of storage between main memory and disk, and if it proves to be effective, determine how/where it should be used, (b) develop algorithms for the use of mass storage in a large computer system, and (c) determine how cache memories should be implemented in very large, fast multiprocessor systems

  5. Development of motion image prediction method using principal component analysis

    International Nuclear Information System (INIS)

    Chhatkuli, Ritu Bhusal; Demachi, Kazuyuki; Kawai, Masaki; Sakakibara, Hiroshi; Kamiaka, Kazuma

    2012-01-01

    Respiratory motion can induce the limit in the accuracy of area irradiated during lung cancer radiation therapy. Many methods have been introduced to minimize the impact of healthy tissue irradiation due to the lung tumor motion. The purpose of this research is to develop an algorithm for the improvement of image guided radiation therapy by the prediction of motion images. We predict the motion images by using principal component analysis (PCA) and multi-channel singular spectral analysis (MSSA) method. The images/movies were successfully predicted and verified using the developed algorithm. With the proposed prediction method it is possible to forecast the tumor images over the next breathing period. The implementation of this method in real time is believed to be significant for higher level of tumor tracking including the detection of sudden abdominal changes during radiation therapy. (author)

  6. Development of geophysical and geochemical data processing software based on component GIS

    International Nuclear Information System (INIS)

    Ke Dan; Yu Xiang; Wu Qubo; Han Shaoyang; Li Xi

    2013-01-01

    Based on component GIS and mixed programming techniques, a software which combines the basic GIS functions, conventional and unconventional data process methods for the regional geophysical and geochemical data together, is designed and developed. The software has many advantages, such as friendly interface, easy to use and utility functions and provides a useful platform for regional geophysical and geochemical data processing. (authors)

  7. MOTIVATION COMPONENT COMMUNICATIVE SKILLS DEVELOPMENT IN THE CONTEXT OF ADAPTATION PERIOD IN CRIMEA

    Directory of Open Access Journals (Sweden)

    Antonina Drozdova

    2015-10-01

    Full Text Available The concept of «system approach» to learning, which considers all the components in close relationship with each other is considered. One of the urgent problems of modern pedagogy — developing communicative abilities on the basis of system approach is studied. The role of motivation in the formation of communicative skills of the future specialist is defined. The purpose of this article is to investigate ways to motivate to success. The author comes to the conclusion that the formation of the motivational component is closely linked to the socialization of the individual and manifests itself as a desire to improve the level of their capabilities.

  8. Considerations on Gastronomic Tourism as a Component of Sustainable Local Development

    Directory of Open Access Journals (Sweden)

    Dan Mihnea Diaconescu

    2016-11-01

    Full Text Available Tourism is a multi-faced activity that links the economic, social and environmental components of sustainability. Firstly, this research analyses residents’ perceptions of the impact of tourism development and examines the factors that influence the support for sustainable tourism development. Secondly, the research discusses Community Based Tourism (CBT and its positive impact of tourism development; CBT is connected to community’s capacity to protect itself from outside threats by negotiating the quality of tourism development. Thirdly, Gastronomic Tourism development is depicted as an interaction between outside developers and local residents that ultimately builds a sustainable dialogue for growth of tourism. Usually, the partnerships established between local community residents and outside tourism developers began with initial resistance from residents and led to the following sequence of behaviour: town meetings, formal organization of residents, petitioning, public demonstration, and legal action. By examining collective action narratives in the study communities, a framework for sustainable rural tourism development is built to understand relationships between tourism impacts, sustainable development and community identity. Findings indicate that residents see tourism as a development factor. The natural, economic, and social-cultural environment as well as infrastructure, age, gender and education are factors that influence the sustainable development of tourism and gastronomic tourism.

  9. An approach to development of structural design criteria for highly irradiated core components

    International Nuclear Information System (INIS)

    Nelson, D.V.

    1980-01-01

    The advent of the fast breeder reactor presents novel challenges in structural design and materials engineering. For instance, the core components of these reactors experience high energy neutron irradiation at elevated temperature, which causes significant time-dependent changes in material behaviour, such as a progressive loss of ductility. New structural design criteria are needed to extend elevated temperature design-by-analysis to account for these changes. Alloys best able to cope with the demands of the core operating environment are being explored and their structural behaviour characterized. The purpose of this paper is to illustrate an approach used in the development of core component structural design criteria. To do this, several design rules, plus brief rationale, from draft RDT Standards F9-7, -8 and -9 will be presented. These recently completed standards ('Structural Design Guidelines for Breeder Reactor Core Components') were prepared for the U.S. Department of Energy and represent a consensus among most organizations participating in the U.S. breeder program. (author)

  10. Adding Vectors across the North: Development of Laboratory Component of Distance Education Physics Course

    Science.gov (United States)

    Spencer, V. K.; Solie, D. J.

    2010-12-01

    Bush Physics for the 21st Century (BP21) is a distance education physics course offered through the Interior Aleutians Campus of the University of Alaska Fairbanks. It provides an opportunity for rural Alaskan high school and community college students, many of whom have no other access to advanced science courses, to earn university science credit. The curriculum is mathematically rigorous and includes a laboratory component to prepare students who wish to pursue science and technology careers. The laboratory component has been developed during the past 3 years. Students learn lab safety, basic laboratory technique, experiment components and group collaboration. Experiments have place-based themes and involve skills that translate to rural Alaska when possible. Preliminary data on the general effectiveness of the labs have been analyzed and used to improve the course.

  11. Development of computational methods of design by analysis for pressure vessel components

    International Nuclear Information System (INIS)

    Bao Shiyi; Zhou Yu; He Shuyan; Wu Honglin

    2005-01-01

    Stress classification is not only one of key steps when pressure vessel component is designed by analysis, but also a difficulty which puzzles engineers and designers at all times. At present, for calculating and categorizing the stress field of pressure vessel components, there are several computation methods of design by analysis such as Stress Equivalent Linearization, Two-Step Approach, Primary Structure method, Elastic Compensation method, GLOSS R-Node method and so on, that are developed and applied. Moreover, ASME code also gives an inelastic method of design by analysis for limiting gross plastic deformation only. When pressure vessel components design by analysis, sometimes there are huge differences between the calculating results for using different calculating and analysis methods mentioned above. As consequence, this is the main reason that affects wide application of design by analysis approach. Recently, a new approach, presented in the new proposal of a European Standard, CEN's unfired pressure vessel standard EN 13445-3, tries to avoid problems of stress classification by analyzing pressure vessel structure's various failure mechanisms directly based on elastic-plastic theory. In this paper, some stress classification methods mentioned above, are described briefly. And the computational methods cited in the European pressure vessel standard, such as Deviatoric Map, and nonlinear analysis methods (plastic analysis and limit analysis), are depicted compendiously. Furthermore, the characteristics of computational methods of design by analysis are summarized for selecting the proper computational method when design pressure vessel component by analysis. (authors)

  12. Standard Operating Procedures for Preparing and Handling Sterile Male Tsetse flies for Release

    International Nuclear Information System (INIS)

    Argiles-Herrero, Rafa; Leak, Stephen G.A.

    2016-01-01

    The purpose of this SOP is to describe the procedures involved in preparing tsetse flies reared in a breeding facility for release in the field for the sterile insect technique (SIT) as a component of Area-Wide Insect pest Management (AW-IPM). Following the procedures which are outlined will help to ensure that the released sterile male tsetse flies are of optimal quality.

  13. Development and empirical validation of symmetric component measures of multidimensional constructs: customer and competitor orientation.

    Science.gov (United States)

    Sørensen, Hans Eibe; Slater, Stanley F

    2008-08-01

    Atheoretical measure purification may lead to construct deficient measures. The purpose of this paper is to provide a theoretically driven procedure for the development and empirical validation of symmetric component measures of multidimensional constructs. Particular emphasis is placed on establishing a formalized three-step procedure for achieving a posteriori content validity. Then the procedure is applied to development and empirical validation of two symmetrical component measures of market orientation, customer orientation and competitor orientation. Analysis suggests that average variance extracted is particularly critical to reliability in the respecification of multi-indicator measures. In relation to this, the results also identify possible deficiencies in using Cronbach alpha for establishing reliable and valid measures.

  14. Sterile insect technique. Principles and practice in area-wide integrated pest management

    International Nuclear Information System (INIS)

    Dyck, V.A.; Hendrichs, J.; Robinson, A.S.

    2005-01-01

    For several major insect pests, the environment-friendly sterile insect technique (SIT) is being applied as a component of area-wide integrated pest management (AW-IPM) programmes. This technology, using radiation to sterilize insects, was first developed in the USA, and is currently applied on six continents. For four decades it has been a major subject for research and development in the Joint FAO/IAEA Programme on Nuclear Techniques in Food and Agriculture, involving both research and the transfer of this technology to Member States so that they can benefit from improved plant, animal and human health, cleaner environments, increased production of plants and animals in agricultural systems, and accelerated economic development. The socio-economic impacts of AW-IPM programmes that integrate the SIT have confirmed the usefulness of this technology. Numerous publications related to the integration of the SIT in pest management programmes, arising from research, coordinated research projects, field projects, symposia, meetings, and training activities have already provided much information to researchers, pest-control practitioners, programme managers, plant protection and animal health officers, and policy makers. However, by bringing together and presenting in a generic fashion the principles, practice, and global application of the SIT, this book will be a major reference source for all current and future users of the technology. The book will also serve as a textbook for academic courses on integrated pest management. Fifty subject experts from 19 countries contributed to the chapters, which were all peer reviewed before final editing

  15. Miniaturized NIR scanning grating spectrometer for use in mobile phones

    Science.gov (United States)

    Knobbe, Jens; Pügner, Tino; Grüger, Heinrich

    2016-05-01

    An extremely miniaturized scanning grating spectrometer at the size of a sugar cube has been developed at Fraunhofer IPMS. To meet the requirements for the integration into a mobile phone a new system approach has been pursued. The key component within the system is a silicon-based deflectable diffraction grating with an integrated driving mechanism. A first sample of the new spectrometer was built and characterized. It was found to have a spectral range from 950 nm to 1900 nm at a resolution of 10 nm. The results show that the performance of the new MEMS spectrometer is in good agreement with the requirements for mobile phone integration.

  16. Evaluation and development of measurement components for a catalytic converter test system

    Energy Technology Data Exchange (ETDEWEB)

    Chan, A.K.

    1997-08-01

    The purpose of this research and development project was to evaluate and configure the components of a test system designed for the analysis of full-scale vehicle-aged automobile catalytic converters. The components tested included an exhaust gas analyzer for measuring hydrocarbon, CO, CO{sub 2} and O{sub 2} contents and a chemiluminescence detector (CLD) for measuring NO{sub x}, as well as thermocouples and pressure meters. A software package (TestPoint vers.2.Ob, Capital Equipment) was used to develop a computer-based data sampling and acquisition interface with the components and sensors connected to the test system. Tests of the Sun MGA-1200, a non-dispersive infrared (NDIR) analyzer, with CO, CO{sub 2} and various hydrocarbons (propane and octane) revealed sensitivity to large pressure changes (greater than 500 mbar). There was no significant cross-sensitivity between the gases except for the slight response of the hydrocarbon (HC) register to water vapor and CO. However, the low range of HC(5-30 vppm) expected in car exhaust after the converter means any cross-sensitivity could have an effect on the measurement, depending on measurement conditions. Tests of the EcoPhysics CLD 700 NO{sub x} meter also indicated sensitivity to pressure. An executable TestPoint run-time application was created to allow near real-time monitoring of the test system using a desktop computer. Nine channels of analog data are fed to a desktop computer via an A/D board and seven exhaust gas parameters through an RS-232C interface with the MGA-1200 23 refs, 32 figs, 10 tabs. Examination paper

  17. Toxicity and sublethal effects of six insecticides to last instar larvae and adults of the biocontrol agents Chrysoperla carnea (Stephens) (Neuroptera: Chrysopidae) and Adalia bipunctata (L.) (Coleoptera: Coccinellidae).

    Science.gov (United States)

    Garzón, A; Medina, P; Amor, F; Viñuela, E; Budia, F

    2015-08-01

    To further develop Integrated Pest Management (IPM) strategies against crop pests, it is important to evaluate the effects of insecticides on biological control agents. Therefore, we tested the toxicity and sublethal effects (fecundity and fertility) of flonicamid, flubendiamide, metaflumizone, spirotetramat, sulfoxaflor and deltamethrin on the natural enemies Chrysoperla carnea and Adalia bipunctata. The side effects of the active ingredients of the insecticides were evaluated with residual contact tests for the larvae and adults of these predators in the laboratory. Flonicamid, flubendiamide, metaflumizone and spirotetramat were innocuous to last instar larvae and adults of C. carnea and A. bipunctata. Sulfoxaflor was slightly toxic to adults of C. carnea and was highly toxic to the L4 larvae of A. bipunctata. For A. bipunctata, sulfoxaflor and deltamethrin were the most damaging compounds with a cumulative larval mortality of 100%. Deltamethrin was also the most toxic compound to larvae and adults of C. carnea. In accordance with the results obtained, the compounds flonicamid, flubendiamide, metaflumizone and spirotetramat might be incorporated into IPM programs in combination with these natural enemies for the control of particular greenhouse pests. Nevertheless, the use of sulfoxaflor and deltamethrin in IPM strategies should be taken into consideration when releasing either of these biological control agents, due to the toxic behavior observed under laboratory conditions. The need for developing sustainable approaches to combine the use of these insecticides and natural enemies within an IPM framework is discussed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  18. Development of a leak-before break procedure for pressurised components

    International Nuclear Information System (INIS)

    Langston, D.B.

    1989-05-01

    For pressurised components there is an increasing interest in the use of leak-before-break arguments to show that defects will behave in a ''failsafe'' manner by growing in such a way as to cause a detectable leak before a disruptive failure of the pressure boundary can occur. The CEGB operates a wide variety of plant and has recognised the need for a flexible leak-before-break procedure which can be applied in a variety of different situations including part-through defects. This paper describes the development of such a procedure and discusses some of the key aspects of the leak-before-break procedure. (author)

  19. The Financial Component of a Strategy for the Development of Logistical Systems

    Directory of Open Access Journals (Sweden)

    Melnykova Kateryna V.

    2017-08-01

    Full Text Available The article analyzes the current scientific approaches to defining the essence of financial strategy as one of the most important components of a strategy for the development of logistical systems. Both the external and the internal environment factors that influence the development of logistical systems have been summarized. In the course of the analysis of current financial management theory and practice, the author identifies the characteristics of formation of an integrated financial-logistical strategy together with the factors that are responsible for possible financial risks in designing a strategy for the development of logistical system. The stages of formation of an integrated financial-logistical strategy and ways to improve the practice of strategic planning of logistical activities have been proposed.

  20. Cognitive components underpinning the development of model-based learning.

    Science.gov (United States)

    Potter, Tracey C S; Bryce, Nessa V; Hartley, Catherine A

    2017-06-01

    Reinforcement learning theory distinguishes "model-free" learning, which fosters reflexive repetition of previously rewarded actions, from "model-based" learning, which recruits a mental model of the environment to flexibly select goal-directed actions. Whereas model-free learning is evident across development, recruitment of model-based learning appears to increase with age. However, the cognitive processes underlying the development of model-based learning remain poorly characterized. Here, we examined whether age-related differences in cognitive processes underlying the construction and flexible recruitment of mental models predict developmental increases in model-based choice. In a cohort of participants aged 9-25, we examined whether the abilities to infer sequential regularities in the environment ("statistical learning"), maintain information in an active state ("working memory") and integrate distant concepts to solve problems ("fluid reasoning") predicted age-related improvements in model-based choice. We found that age-related improvements in statistical learning performance did not mediate the relationship between age and model-based choice. Ceiling performance on our working memory assay prevented examination of its contribution to model-based learning. However, age-related improvements in fluid reasoning statistically mediated the developmental increase in the recruitment of a model-based strategy. These findings suggest that gradual development of fluid reasoning may be a critical component process underlying the emergence of model-based learning. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  1. How Do the Different Components of Episodic Memory Develop? Role of Executive Functions and Short-Term Feature-Binding Abilities

    Science.gov (United States)

    Picard, Laurence; Cousin, Sidonie; Guillery-Girard, Berenere; Eustache, Francis; Piolino, Pascale

    2012-01-01

    This study investigated the development of all 3 components of episodic memory (EM), as defined by Tulving, namely, core factual content, spatial context, and temporal context. To this end, a novel, ecologically valid test was administered to 109 participants aged 4-16 years. Results showed that each EM component develops at a different rate.…

  2. A Homogeneous and Self-Dual Interior-Point Linear Programming Algorithm for Economic Model Predictive Control

    DEFF Research Database (Denmark)

    Sokoler, Leo Emil; Frison, Gianluca; Skajaa, Anders

    2015-01-01

    We develop an efficient homogeneous and self-dual interior-point method (IPM) for the linear programs arising in economic model predictive control of constrained linear systems with linear objective functions. The algorithm is based on a Riccati iteration procedure, which is adapted to the linear...... system of equations solved in homogeneous and self-dual IPMs. Fast convergence is further achieved using a warm-start strategy. We implement the algorithm in MATLAB and C. Its performance is tested using a conceptual power management case study. Closed loop simulations show that 1) the proposed algorithm...

  3. Plasma facing materials and components for future fusion devices - development, characterization and performance under fusion specific loading conditions

    Energy Technology Data Exchange (ETDEWEB)

    Linke, J. [Forschungszentrum Juelich (Germany). Inst. fuer Plasmaphysik

    2006-04-15

    The plasma exposed components in existing and future fusion devices are strongly affected by the plasma material interaction processes. These mechanisms have a strong influence on the plasma performance; in addition they have major impact on the lifetime of the plasma facing armour and the joining interface between the plasma facing material (PFM) and the heat sink. Besides physical and chemical sputtering processes, high heat quasi-stationary fluxes during normal and intense thermal transients are of serious concern for the engineers who develop reliable wall components. In addition, the material and component degradation due to intense fluxes of energetic neutrons is another critical issue in D-T-burning fusion devices which requires extensive RandD. This paper presents an overview on the materials development and joining, the testing of PFMs and components, and the analysis of the neutron irradiation induced degradation.

  4. Plasma facing materials and components for future fusion devices - development, characterization and performance under fusion specific loading conditions

    International Nuclear Information System (INIS)

    Linke, J.

    2006-01-01

    The plasma exposed components in existing and future fusion devices are strongly affected by the plasma material interaction processes. These mechanisms have a strong influence on the plasma performance; in addition they have major impact on the lifetime of the plasma facing armour and the joining interface between the plasma facing material (PFM) and the heat sink. Besides physical and chemical sputtering processes, high heat quasi-stationary fluxes during normal and intense thermal transients are of serious concern for the engineers who develop reliable wall components. In addition, the material and component degradation due to intense fluxes of energetic neutrons is another critical issue in D-T-burning fusion devices which requires extensive RandD. This paper presents an overview on the materials development and joining, the testing of PFMs and components, and the analysis of the neutron irradiation induced degradation

  5. Plasma facing materials and components for future fusion devices—development, characterization and performance under fusion specific loading conditions

    Science.gov (United States)

    Linke, J.

    2006-04-01

    The plasma exposed components in existing and future fusion devices are strongly affected by the plasma material interaction processes. These mechanisms have a strong influence on the plasma performance; in addition they have major impact on the lifetime of the plasma facing armour and the joining interface between the plasma facing material (PFM) and the heat sink. Besides physical and chemical sputtering processes, high heat quasi-stationary fluxes during normal and intense thermal transients are of serious concern for the engineers who develop reliable wall components. In addition, the material and component degradation due to intense fluxes of energetic neutrons is another critical issue in D-T-burning fusion devices which requires extensive R&D. This paper presents an overview on the materials development and joining, the testing of PFMs and components, and the analysis of the neutron irradiation induced degradation.

  6. NEW DEVELOPMENTS ON INVERSE POLYGON MAPPING TO CALCULATE GRAVITATIONAL LENSING MAGNIFICATION MAPS: OPTIMIZED COMPUTATIONS

    International Nuclear Information System (INIS)

    Mediavilla, E.; Lopez, P.; Mediavilla, T.; Ariza, O.; Muñoz, J. A.; Gonzalez-Morcillo, C.; Jimenez-Vicente, J.

    2011-01-01

    We derive an exact solution (in the form of a series expansion) to compute gravitational lensing magnification maps. It is based on the backward gravitational lens mapping of a partition of the image plane in polygonal cells (inverse polygon mapping, IPM), not including critical points (except perhaps at the cell boundaries). The zeroth-order term of the series expansion leads to the method described by Mediavilla et al. The first-order term is used to study the error induced by the truncation of the series at zeroth order, explaining the high accuracy of the IPM even at this low order of approximation. Interpreting the Inverse Ray Shooting (IRS) method in terms of IPM, we explain the previously reported N –3/4 dependence of the IRS error with the number of collected rays per pixel. Cells intersected by critical curves (critical cells) transform to non-simply connected regions with topological pathologies like auto-overlapping or non-preservation of the boundary under the transformation. To define a non-critical partition, we use a linear approximation of the critical curve to divide each critical cell into two non-critical subcells. The optimal choice of the cell size depends basically on the curvature of the critical curves. For typical applications in which the pixel of the magnification map is a small fraction of the Einstein radius, a one-to-one relationship between the cell and pixel sizes in the absence of lensing guarantees both the consistence of the method and a very high accuracy. This prescription is simple but very conservative. We show that substantially larger cells can be used to obtain magnification maps with huge savings in computation time.

  7. SpaceWire: IP, Components, Development Support and Test Equipment

    Science.gov (United States)

    Parkes, S.; McClements, C.; Mills, S.; Martin, I.

    SpaceWire is a communications network for use onboard spacecraft. It is designed to connect high data-rate sensors, large solid-state memories, processing units and the downlink telemetry subsystem providing an integrated data-handling network. SpaceWire links are serial, high-speed (2 Mbits/sec to 400 Mbits/sec), bi-directional, full-duplex, pointto- point data links which connect together SpaceWire equipment. Application information is sent along a SpaceWire link in discrete packets. Control and time information can also be sent along SpaceWire links. SpaceWire is defined in the ECSS-E50-12A standard [1]. With the adoption of SpaceWire on many space missions the ready availability of intellectual property (IP) cores, components, software drivers, development support, and test equipment becomes a major issue for those developing satellites and their electronic subsystems. This paper describes the work being done at the University of Dundee and STAR-Dundee Ltd with ESA, BNSC and internal funding to make these essential items available. STAR-Dundee is a spin-out company of the University of Dundee set up specifically to support users of SpaceWire.

  8. The case and opportunity for public-supported financial incentives to implement integrated pest management.

    Science.gov (United States)

    Brewer, Michael J; Hoard, Robert J; Landis, Joy N; Elworth, Lawrence E

    2004-12-01

    Food, water, and worker protection regulations have driven availability, and loss, of pesticides for use in pest management programs. In response, public-supported research and extension projects have targeted investigation and demonstration of reduced-risk integrated pest management (IPM) techniques. But these new techniques often result in higher financial burden to the grower, which is counter to the IPM principle that economic competitiveness is critical to have IPM adopted. As authorized by the 2002 Farm Bill and administered by the U.S. Department of Agriculture (USDA) Natural Resources Conservation Service (NRCS), conservation programs exist for delivering public-supported financial incentives to growers to increase environmental stewardship on lands in production. NRCS conservation programs are described, and the case for providing financial incentives to growers for implementing IPM is presented. We also explored the opportunity and challenge to use one key program, the Environmental Quality Incentives Program (EQIP), to aid grower adoption of IPM. The EQIP fund distribution to growers from 1997 to 2002 during the last Farm Bill cycle totaled approximately 1.05 billion dollars with a portion of funds supporting an NRCS-designed pest management practice. The average percentage of allocation of EQIP funds to this pest management practice among states was 0.77 +/- 0.009% (mean +/- SD). Using Michigan as an example, vegetable and fruit grower recognition of the program's use to implement IPM was modest (25% of growers surveyed), and their recognition of its use in aiding implementation of IPM was improved after educational efforts (74%). Proposals designed to enhance program usefulness in implementing IPM were delivered through the NRCS advisory process in Michigan. Modifications for using the NRCS pest management practice to address resource concerns were adopted, incentive rates for pest management were adjusted, and an expanded incentive structure for IPM

  9. VIRTUAL ELECTRONIC COMPONENTS OF THE ELECTRONIC EQUIPMENT

    Directory of Open Access Journals (Sweden)

    E. Lazarevich

    2013-01-01

    Full Text Available The article is present new idea of the creation, developments and improvements of the electronic equipment of complex systems by means of the virtual electronic components. The idea of the virtual electronic components is a presentation and perception of the creation and developments of the equipment on two forming: real – in the manner of standard marketed block of the intellectual property and image – in the manner of virtual component. The real component in most cases slows the development of the electronic equipment. The imaginary component is the «locomotive» of development of the electronic equipment. The Imaginary component contains the scientific has brushed against developer. The scientific has brushed against developer reveals of itself in the manner of virtual component on the modern level of the design rates of microelectronics.

  10. Design and development of neutral beam module components

    International Nuclear Information System (INIS)

    Holl, P.M.; Bulmer, R.H.; Dilgard, L.W.; Horvath, J.A.; Molvik, A.W.; Porter, G.D.; Shearer, J.W.; Slack, D.S.; Colonias, J.S.

    1979-01-01

    The Mirror Fusion Test Facility (MFTF) injection system consists of twenty 20 keV start-up, and twenty-four 80 keV sustaining neutral beam source modules. The neutral beam modules are mounted in four clusters equally spaced around the waist of the vacuum vessel which contains the superconducting magnets. A module is defined here as an assembly consisting of a beam source and the interfacing components between that beam source and the vacuum chamber. Six major interfacing components are the subject of this paper. They are the magnetic shield, the neutralizer duct, the isolation valve, mounting gimbals, aiming bellows and actuators

  11. Identifying obstacles and ranking common biological control research priorities for Europe to manage most economically important pests in arable, vegetable and perennial crops.

    Science.gov (United States)

    Lamichhane, Jay Ram; Bischoff-Schaefer, Monika; Bluemel, Sylvia; Dachbrodt-Saaydeh, Silke; Dreux, Laure; Jansen, Jean-Pierre; Kiss, Jozsef; Köhl, Jürgen; Kudsk, Per; Malausa, Thibaut; Messéan, Antoine; Nicot, Philippe C; Ricci, Pierre; Thibierge, Jérôme; Villeneuve, François

    2017-01-01

    EU agriculture is currently in transition from conventional crop protection to integrated pest management (IPM). Because biocontrol is a key component of IPM, many European countries recently have intensified their national efforts on biocontrol research and innovation (R&I), although such initiatives are often fragmented. The operational outputs of national efforts would benefit from closer collaboration among stakeholders via transnationally coordinated approaches, as most economically important pests are similar across Europe. This paper proposes a common European framework on biocontrol R&I. It identifies generic R&I bottlenecks and needs as well as priorities for three crop types (arable, vegetable and perennial crops). The existing gap between the market offers of biocontrol solutions and the demand of growers, the lengthy and expensive registration process for biocontrol solutions and their varying effectiveness due to variable climatic conditions and site-specific factors across Europe are key obstacles hindering the development and adoption of biocontrol solutions in Europe. Considering arable, vegetable and perennial crops, a dozen common target pests are identified for each type of crop and ranked by order of importance at European level. Such a ranked list indicates numerous topics on which future joint transnational efforts would be justified. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  12. Development of wear resistant ceramic coatings for diesel engine components. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Haselkorn, M.H. [Caterpillar, Inc., Peoria, IL (United States)

    1992-04-01

    Improved fuel economy and a reduction of emissions can be achieved by insulation of the combustion chamber components to reduce heat rejection. However, insulating the combustion chamber components will also increase the operating temperature of the piston ring/cylinder liner interface from approximately 150{degree}C to over 300{degree}C. Existing ring/liner materials can not withstand these higher operating temperatures and for this reason, new materials need to be developed for this critical tribological interface. The overall goal of this program is the development of piston ring/cylinder liner material pairs which would be able to provide the required friction and wear properties at these more severe operating conditions. More specifically, this program first selected, and then evaluated, potential d/wear resistant coatings which could be applied to either piston rings an or cylinder liners and provide, at 350{degree}C under lubricated conditions, coefficients of friction below 0.1 and wear rates of less than 25 {times} lO{sup {minus}6} mm/hour. The processes selected for applying the candidate wear resistant coatings to piston rings and/or cylinder liners were plasma spraying, chemical vapor, physical vapor and low temperature arc vapor deposition techniques as well as enameling techniques.

  13. A multi-component reaction towards the development of highly modular hydrogelators.

    Science.gov (United States)

    Sundén, Henrik; Sauvée, Claire; Haukka, Matti; Stöm, Anna

    2018-04-16

    Herein we report a multi-component reaction approach for the development of a new class of hydrogelators based on the OxoTriphenylHexanOate (OTHO) backbone. A focused library of OTHOs has been synthesized and their hydrogelation features evaluated. The two most potent hydrogelators were studied by rheology revealing different gel strengths, appearances and thixotropic behaviours. The new gelators showcase the versatility of the OTHO backbone as a platform for the design of functionalized hydrogels with tunable gel properties. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Adaptation of Black-Box Software Components

    Directory of Open Access Journals (Sweden)

    Rolf Andreas Rasenack

    2008-01-01

    Full Text Available The globalization of the software market leads to crucial problems for software companies. More competition between software companies arises and leads to the force on companies to develop ever newer software products in ever shortened time interval. Therefore the time to market for software systems is shortened and obviously the product life cycle is shortened too. Thus software companies shortened the time interval for research and development. Due to the fact of competition between software companies software products have to develop low-priced and this leads to a smaller return on investment. A big challenge for software companies is the use of an effective research and development process to have these problems under control. A way to control these problems can be the reuse of existing software components and adapt those software components to new functionality or accommodate mismatched interfaces. Complete redevelopment of software products is more expensive and time consuming than to develop software components. The approach introduced here presents novel technique together with a supportive environment that enables developers to cope with the adaptability of black-box software components. A supportive environment will be designed that checks the compatibility of black-box software components with the assistance of their specifications. Generated adapter software components can take over the part of adaptation and advance the functionality. Besides, a pool of software components can be used to compose an application to satisfy customer needs. Certainly this pool of software components consists of black-box software components and adapter software components which can be connected on demand.

  15. Development of a Versatile Ultrasonic Internal Pipe/Vessel Component Monitor for In-Service Inspection of Nuclear Reactor Components

    Energy Technology Data Exchange (ETDEWEB)

    Searfass, Clifford T. [Structural Integrity Associates, Inc., State College, PA (United States); Malinowski, Owen M. [Structural Integrity Associates, Inc., State College, PA (United States); Van Velsor, Jason K. [Structural Integrity Associates, Inc., State College, PA (United States)

    2015-03-22

    The stated goal of this work was to develop a versatile system which could accurately measure vessel and valve internal vibrations and cavitation formation under in-service conditions in nuclear power plants, ultrasonically. The developed technology will benefit the nuclear power generation industry by allowing plant operators to monitor valve and vessel internals during operation. This will help reduce planned outages and plant component failures. During the course of this work, Structural Integrity Associates, Inc. gathered information from industry experts that target vibration amplitudes to be detected should be in the range of 0.001-in to 0.005-in (0.025-mm to 0.127-mm) and target vibration frequency ranges which should be detected were found to be between 0-Hz and 300-Hz. During the performed work, an ultrasonic measuring system was developed which utilized ultrasonic pulse-echo time-of-flight measurements to measure vibration frequency and amplitude. The developed system has been shown to be able to measure vibration amplitudes as low as 0.0008-in (0.020-mm) with vibration frequencies in the range of 17-Hz to 1000-Hz. Therefore, the developed system was able to meet the industry needs for vibration measurement. The developed ultrasonic system was also to be able to measure cavitation formation by monitoring the received ultrasonic time- and frequency-domain signals. This work also demonstrated the survivability of commercially available probes at temperatures up to 300-F for several weeks.

  16. Development of web-based integrity evaluation system for primary components in a nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Lee, S.M.; Kim, J.C.; Choi, J.B.; Kim, Y.J. [SAFE Research Center, Sungkyunkwan Univ., Suwon (Korea); Choi, S.N.; Jang, K.S.; Hong, S.Y. [Korea Electronic Power Research Inst., Daejeon (Korea)

    2004-07-01

    A nuclear power plant is composed of a number of primary components. Maintaining the integrity of these components is one of the most critical issues in nuclear industry. In order to maintain the integrity of these primary components, a complicated procedure is required including periodical in-service inspection, failure assessment, fracture mechanics analysis, etc. Also, experts in different fields have to co-operate to resolve the integrity issues on the basis of inspection results. This integrity evaluation process usually takes long, and thus, is detrimental for the plant productivity. Therefore, an effective safety evaluation system is essential to manage integrity issues on a nuclear power plant. In this paper, a web-based integrity evaluation system for primary components in a nuclear power plant is proposed. The proposed system, which is named as WEBIES (web-based integrity evaluation system), has been developed in the form of 3-tier system architecture. The system consists of three servers; application program server, user interface program server and data warehouse server. The application program server includes the defect acceptance analysis module and the fracture mechanics analysis module which are programmed on the basis of ASME sec. XI, appendix A. The data warehouse server provides data for the integrity evaluation including material properties, geometry information, inspection data and stress data. The user interface program server provides information to all co- workers in the field of integrity evaluation. The developed system provides engineering knowledge-based information and concurrent and collaborative working environment through internet, and thus, is expected to raise the efficiency of integrity evaluation procedures on primary components of a nuclear power plant. (orig.)

  17. Development of web-based integrity evaluation system for primary components in a nuclear power plant

    International Nuclear Information System (INIS)

    Lee, S.M.; Kim, J.C.; Choi, J.B.; Kim, Y.J.; Choi, S.N.; Jang, K.S.; Hong, S.Y.

    2004-01-01

    A nuclear power plant is composed of a number of primary components. Maintaining the integrity of these components is one of the most critical issues in nuclear industry. In order to maintain the integrity of these primary components, a complicated procedure is required including periodical in-service inspection, failure assessment, fracture mechanics analysis, etc. Also, experts in different fields have to co-operate to resolve the integrity issues on the basis of inspection results. This integrity evaluation process usually takes long, and thus, is detrimental for the plant productivity. Therefore, an effective safety evaluation system is essential to manage integrity issues on a nuclear power plant. In this paper, a web-based integrity evaluation system for primary components in a nuclear power plant is proposed. The proposed system, which is named as WEBIES (web-based integrity evaluation system), has been developed in the form of 3-tier system architecture. The system consists of three servers; application program server, user interface program server and data warehouse server. The application program server includes the defect acceptance analysis module and the fracture mechanics analysis module which are programmed on the basis of ASME sec. XI, appendix A. The data warehouse server provides data for the integrity evaluation including material properties, geometry information, inspection data and stress data. The user interface program server provides information to all co- workers in the field of integrity evaluation. The developed system provides engineering knowledge-based information and concurrent and collaborative working environment through internet, and thus, is expected to raise the efficiency of integrity evaluation procedures on primary components of a nuclear power plant. (orig.)

  18. Strategic options in using sterile insects for area-wide integrated pest management

    International Nuclear Information System (INIS)

    Hendrichs, J.; Vreysen, M.J.B.; Enkerlin, W.R.; Cayol, J.P.

    2005-01-01

    The four strategic options, 'suppression', 'eradication', 'containment' and 'prevention', in which the sterile insect technique (SIT) can be deployed as part of area-wide integrated pest management (AW-IPM) interventions, are defined and described in relation to the contexts in which they are applied against exotic or naturally occurring major insect pests. Advantages and disadvantages of these strategic options are analysed, and examples of successful programmes provided. Considerations of pest status, biology and distribution affecting decision-making in relation to strategy selection are reviewed and discussed in terms of feasibility assessment, and programme planning and implementation. Unrealistic expectations are often associated with applying the SIT, resulting in high political costs to change a strategy during implementation. The choice of strategy needs to be assessed carefully, and considerable baseline data obtained to prepare for the selected strategy, before embarking on an AW-IPM programme with an SIT component. (author)

  19. A Component Approach to Collaborative Scientific Software Development: Tools and Techniques Utilized by the Quantum Chemistry Science Application Partnership

    Directory of Open Access Journals (Sweden)

    Joseph P. Kenny

    2008-01-01

    Full Text Available Cutting-edge scientific computing software is complex, increasingly involving the coupling of multiple packages to combine advanced algorithms or simulations at multiple physical scales. Component-based software engineering (CBSE has been advanced as a technique for managing this complexity, and complex component applications have been created in the quantum chemistry domain, as well as several other simulation areas, using the component model advocated by the Common Component Architecture (CCA Forum. While programming models do indeed enable sound software engineering practices, the selection of programming model is just one building block in a comprehensive approach to large-scale collaborative development which must also address interface and data standardization, and language and package interoperability. We provide an overview of the development approach utilized within the Quantum Chemistry Science Application Partnership, identifying design challenges, describing the techniques which we have adopted to address these challenges and highlighting the advantages which the CCA approach offers for collaborative development.

  20. Structural mechanics research and development for main components of chinese 300 MWe PWR NPPs: from design to life management

    International Nuclear Information System (INIS)

    Yao Weida; Dou Yikang; Xie Yongcheng; He Yinbiao; Zhang Ming; Liang Xingyun

    2005-01-01

    Qinshan Nuclear Power Plant (Unit I), is a 300 MWe prototype PWR independently developed by Chinese own efforts, from design, manufacture, construction, installation, commissioning, to operation, inspection, maintenance, ageing management and lifetime assessment. Shanghai Nuclear Engineering Research and Design Institute (SNERDI) has taken up with and involved in deeply the R and D to tackle problems of this type of reactor since very beginning in early 1970s. Structural mechanics is one of the important aspects to ensure the safety and reliability for NPP components. This paper makes a summary on role of structural mechanics for component safety and reliability assessment in different stages of design, commissioning, operation, as well as lifetime assessment on this type PWR NPPs, including Qinshan-I and Chashma-I, a sister plant in Pakistan designed by SNERDI. The main contents of the paper cover design by analysis for key components of NSSS; mechanical problems relating to safety analysis; special problems relating to pressure retaining components, such as fracture mechanics, sealing analysis and its test verifications, etc.; experimental research on flow-induced vibration; seismic qualification for components; component failure diagnosis and root cause analysis; vibration qualification and diagnosis technique; component online monitoring technique; development of defect assessment; methodology of aging management and lifetime assessment for key components of NPPs, etc. (authors)

  1. Simple screening tests for the detection of metallo-β-lactamase (MBL production in clinical isolates of Pseudomonas and Acinetobacter

    Directory of Open Access Journals (Sweden)

    Shaheda Anwar

    2010-01-01

    Full Text Available There are no standard methods for the detection of metallo-b-lactamase (MBL production in gram negative organism in routine microbiology practice. The present study was undertaken to evaluate the screening tests like double disk synergy test (DDST and disk potentiation test (DPT using ceftazidime (CAZ and imipenem (IPM disks with chelating agents like EDTA, 2-mercaptopropionic acid (2-MPA. A total of 132 Pseudomonas and 76 Acinetobacter isolates were obtained from Bangabandhu Sheikh Mujib Medical University (BSMMU and Bangladesh Institute of Research and Rehabilitation for Diabetes, Endocrine and Metabolic Disorders (BIRDEM hospitals of Dhaka city. A total of 53 and 29 IPM resistant Pseudomonas and Acinetobacter isolates were selected. EDTA-IPM microdilution minimum inhibitory concentration (EDTA-IPM MIC method detected MBL in 44 (83% IPM resistant Pseudomonas and 19 (65.5% Acinetobacter isolates. DDST with CAZ-0.1M EDTA and CAZ-2-MPA detected MBL in 73.6% and 67.9% of IPM resistant Pseudomonas and 55.2% and 48.3% of Acinetobacter isolates respectively. The detection rate was 67.9% and 66.1% in Pseudomonas and 51.7% and 44.8% in Acinetobacter isolates by EDTA-IPM and IPM-2-MPA methods respectively. In comparison to DDST, DPT with CAZ-0.1M EDTA showed higher sensitivity (89.7% and specificity (100% for detection of MBL in Pseudomonas and Acinetobacter. The results showed that simple screening tests like DPT with 0.1M EDTA was able to detect MBL producing Pseudomonas and Acinetobacter from clinical samples with high sensitivity and specificity. Ibrahim Med. Coll. J. 2010; 4(1: 26-30

  2. Introduction to the permanent magnet motor market

    Energy Technology Data Exchange (ETDEWEB)

    Sawa, Toshihiro; Hamada, Kaneyuki [Yaskawa Electric Corp. (Japan)

    2000-07-01

    According to the Kyoto summit on global warming (COP3) in December 1997, the green-house gas emission level has to be reduced to 92-94% of the 1990 green-house gas level by the year 2014-2018. This would require conserving energy. An efficient means of achieving this voluntary goal is by employing high-efficiency drives, since motors consume 70% of all electricity for industrial use in Japan. As adjustable speed drives become popular, interior permanent magnet (IPM) motors, lately, have been recognized for high-efficiency performance. Due to the progress in permanent magnet technology combined with modern control methods, especially vector control with and without speed-sensors, the IPM motor is gaining in popularity. Compact size and high-efficiency performance is furthering the IPM motor as the preferred motor in many applications. This paper describes the principle and operation of IPM motors and compares its performance with that of an induction motor. Important features and practical control methods for IPM motors are presented. Various application examples highlighting the advantages of employing an IPM motor system are discussed. The applications include, but are not limited to, machine tools, fans, pumps, elevators, cranes, etc. (orig.)

  3. Developing standard performance testing procedures for material control and accounting components at a site

    International Nuclear Information System (INIS)

    Scherer, Carolynn P.; Bushlya, Anatoly V.; Efimenko, Vladimir F.; Ilyanstev, Anatoly; Regoushevsky, Victor I.

    2010-01-01

    The condition of a nuclear material control and accountability system (MC and A) and its individual components, as with any system combining technical elements and documentation, may be characterized through an aggregate of values for the various parameters that determine the system's ability to perform. The MC and A system's status may be functioning effectively, marginally or not functioning based on a summary of the values of the individual parameters. This work included a review of the following subsystems, MC and A and Detecting Material Losses, and their respective elements for the material control and accountability system: (a) Elements of the MC and A Subsystem - Information subsystem (Accountancy/Inventory), Measurement subsystem, Nuclear Material Access subsystem, including tamper-indicating device (TID) program, and Automated Information-gathering subsystem; (b) Elements for Detecting Nuclear Material Loses Subsystem - Inventory Differences, Shipper/receiver Differences, Confirmatory Measurements and differences with accounting data, and TID or Seal Violations. In order to detect the absence or loss of nuclear material there must be appropriate interactions among the elements and their respective subsystems from the list above. Additionally this work includes a review of regulatory requirements for the MC and A system component characteristics and criteria that support the evaluation of the performance of the listed components. The listed components had performance testing algorithms and procedures developed that took into consideration the regulatory criteria. The developed MC and A performance-testing procedures were the basis for a Guide for MC and A Performance Testing at the material balance areas (MBAs) of State Scientific Center of the Russian Federation - Institute for Physics and Power Engineering (SSC RF-IPPE).

  4. ANOVA-principal component analysis and ANOVA-simultaneous component analysis: a comparison.

    NARCIS (Netherlands)

    Zwanenburg, G.; Hoefsloot, H.C.J.; Westerhuis, J.A.; Jansen, J.J.; Smilde, A.K.

    2011-01-01

    ANOVA-simultaneous component analysis (ASCA) is a recently developed tool to analyze multivariate data. In this paper, we enhance the explorative capability of ASCA by introducing a projection of the observations on the principal component subspace to visualize the variation among the measurements.

  5. Analyser Framework to Verify Software Components

    Directory of Open Access Journals (Sweden)

    Rolf Andreas Rasenack

    2009-01-01

    Full Text Available Today, it is important for software companies to build software systems in a short time-interval, to reduce costs and to have a good market position. Therefore well organized and systematic development approaches are required. Reusing software components, which are well tested, can be a good solution to develop software applications in effective manner. The reuse of software components is less expensive and less time consuming than a development from scratch. But it is dangerous to think that software components can be match together without any problems. Software components itself are well tested, of course, but even if they composed together problems occur. Most problems are based on interaction respectively communication. Avoiding such errors a framework has to be developed for analysing software components. That framework determines the compatibility of corresponding software components. The promising approach discussed here, presents a novel technique for analysing software components by applying an Abstract Syntax Language Tree (ASLT. A supportive environment will be designed that checks the compatibility of black-box software components. This article is concerned to the question how can be coupled software components verified by using an analyzer framework and determines the usage of the ASLT. Black-box Software Components and Abstract Syntax Language Tree are the basis for developing the proposed framework and are discussed here to provide the background knowledge. The practical implementation of this framework is discussed and shows the result by using a test environment.

  6. COMPONENT DEVELOPMENT NEEDS FOR THE HYBRID SULFUR ELECTROLYZER

    Energy Technology Data Exchange (ETDEWEB)

    Hobbs, D; Hector Colon-Mercado, H; Mark Elvington, M

    2008-05-30

    Fiscal year 2008 studies in electrolyzer component development have focused on the characterization of membrane electrode assemblies (MEA) after performance tests in the single cell electrolyzer, evaluation of electrocatalysts and membranes using a small scale electrolyzer and evaluating the contribution of individual cell components to the overall electrochemical performance. Scanning electron microscopic (SEM) studies of samples taken from MEAs testing in the SRNL single cell electrolyzer test station indicates a sulfur-rich layer forms between the cathode catalyst layer and the membrane. Based on a review of operating conditions for each of the MEAs evaluated, we conclude that the formation of the layer results from the reduction of sulfur dioxide as it passes through the MEA and reaches the catalyst layer at the cathode-membrane interface. Formation of the sulfur rich layer results in partial delamination of the cathode catalyst layer leading to diminished performance. Furthermore we believe that operating the electrolyzer at elevated pressure significantly increases the rate of formation due to increased adsorption of hydrogen on the internal catalyst surface. Thus, identification of a membrane that exhibits much lower transport of sulfur dioxide is needed to reduce the quantity of sulfur dioxide that reaches the cathode catalyst and is reduced to produce the sulfur-rich layer. Three candidate membranes are currently being evaluated that have shown promise from preliminary studies, (1) modified Nafion{reg_sign}, (2) polybenzimidazole (PBI), and (3) sulfonated Diels Alder polyphenylene (SDAPP). Testing examined the activity for the sulfur dioxide oxidation of platinum (Pt) and platinum-alloy catalysts in 30 wt% sulfuric acid solution. Linear sweep voltammetry showed an increase in activity when catalysts in which Pt is alloyed with non-noble transition metals such as cobalt and chromium. However when Pt is alloyed with noble metals, such as iridium or ruthenium

  7. Artificial heart system thermal converter and blood pump component research and development

    International Nuclear Information System (INIS)

    Pouchot, W.D.; Bifano, N.J.; Hanson, J.P.

    1975-01-01

    A bench model version of a nuclear-powered artificial heart system to be used as a replacement for the natural heart was constructed and tested as a part of a broader U. S. ERDA program. The objective of the broader program has been to develop a prototype of a fully implantable nuclear-powered total artificial heart system powered by the thermal energy of plutonium-238 and having minimum weight and volume and a minimum life of ten years. As a forward step in this broader program, component research and development has been carried out directed towards a fully implantable and advanced version of the bench model (IVBM). Some of the results of the component research and development effort on a Stirling engine, blood pump drive mechanisms, and coupling mechanisms are presented. The Stirling-mechanical system under development is shown. There are three major subassemblies: the thermal converter, the coupling mechanism, and the blood pump drive mechanism. The thermal converter uses a Stirling cycle to convert the heat of the plutonium-238 fueled heat source to a rotary shaft power output. The coupling mechanism changes the orientation of the output shaft by 90 degrees and transmits the pumping power by wire-wound core flexible shafting to the pumping mechanism. The coupling mechanism also provides routing of the coolant lines which carry the cycle waste heat from the thermal converter to the blood pump. The change in orientation of the thermal converter output shaft is for convenience in implanting in a calf. This orientation of thermal converter to blood pump seemed to give the best overall system fit in a calf based on fit trials with wooden models in a calf cadaver

  8. Development of HT-PEMFC components and stack for CHP unit

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, Jens Oluf; Li, Q. (Technical Univ. of Denmark, Dept. of Chemistry, Kgs. Lyngby (Denmark)); Terkelsen, C.; Rudbech, H.C.; Steenberg, T. (Danish Power System Aps, Charlottenlund (Denmark)); Thibault de Rycke (IRD Fuel Cell A/S, Svendborg (Denmark))

    2009-10-15

    The aim of the project has been to further develop components for an all Danish high temperature PEM fuel cells stack for application in combined heat and power units (CHP units). The final product aimed at was a 1.5-2 kW stack for operation at 150-200 deg. C. The project follows the previous PSO project 4760, 'High Temperature PEM Fuel Cell'. The project has addressed the HT-PEM fuel cells form a components point of view and the materials here for. The main areas were polymer and membrane development, electrode and MEA development (MEA = membrane electrode assembly, i.e. the cells.) and stack development. The membrane development begins with the polymer. The polymerization technique was improved significantly in two ways. Better understanding of the process and the critical issues has led to more reproducible results with repeated high molecular weights. The molecular weight is decisive for the membrane strength and durability. The process was also scaled up to 100-200 g polymer pr. batch in a new polymerization facility build during the project. It is dimensioned for larger batches too, but this was not verified during the project. The polymer cannot be purchased in the right quality for fuel cell membranes and it is important that it manufacture is not a limiting factor at the present state. Experiments with other membrane casting techniques were also made. The traditional PBI doped with phosphoric acid is still the state of art membrane for the HT-PEM fuel cells, but progress was also made with modified membranes. Different variants of PBI were synthesized and tested. Electrodes have been manufactured by a spray technique in contrast to the previously applied tape casting. The hand held spray gun previously led to an improvement of the electrodes, but the reproducibility was limited. Subsequently the construction of a semi automated spray machine was started and results like of the best hand sprayed electrodes were obtained. A viable way of MEA rim

  9. Development of technology on natural flaw fabrication and precise diagnosis for the major components in NPPs

    International Nuclear Information System (INIS)

    Han, Jung Ho; Choi, Myung Sik; Lee, Doek Hyun; Hur, Do Haeng

    2002-01-01

    The objective of this research is to develop a fabrication technology of natural flaw specimen of major components in NPPs and a technology of precise diagnosis for failure and degradation of components using natural flaw specimen. 1) Successful development of the natural flaw fabrication technology of SG tube 2) Evaluation of ECT signal and development of precise diagnosis using natural flaws. - Determination of length, depth, width, and multiplicity of fabricated natural flaws. - Informations about detectability and accuracy of ECT evaluation on various kinds of defects are collected when the combination of probe and frequency is changed. - An advanced technology for precise ECT evaluation is established. 3) Application of precise ECT diagnosis to failure analysis of SG tube in operation. - Fretting wear of KSNP SG. - ODSCC at tube expanded region of KSNP SG. - Determination of through/non-through wall of axial crack

  10. New design for inertial piezoelectric motors

    Science.gov (United States)

    Liu, Lige; Ge, Weifeng; Meng, Wenjie; Hou, Yubin; Zhang, Jing; Lu, Qingyou

    2018-03-01

    We have designed, implemented, and tested a novel inertial piezoelectric motor (IPM) that is the first IPM to have controllable total friction force, which means that it sticks with large total friction forces and slips with severely reduced total friction forces. This allows the IPM to work with greater robustness and produce a larger output force at a lower threshold voltage while also providing higher rigidity. This is a new IPM design that means that the total friction force can be dramatically reduced or even canceled where necessary by pushing the clamping points at the ends of a piezoelectric tube that contains the sliding shaft inside it in the opposite directions during piezoelectric deformation. Therefore, when the shaft is propelled forward by another exterior piezoelectric tube, the inner piezoelectric tube can deform to reduce the total friction force acting on the shaft instantly and cause more effective stepping movement of the shaft. While our new IPM requires the addition of another piezoelectric tube, which leads to an increase in volume of 120% when compared with traditional IPMs, the average step size has increased by more than 400% and the threshold voltage has decreased by more than 50 V. The improvement in performance is far more significant than the increase in volume. This enhanced performance will allow the proposed IPM to work under large load conditions where a simple and powerful piezoelectric motor is needed.

  11. Development of core technology for KNGR system design; development of quantitative reliability evaluation methodologies of KNGR digital I and C components

    Energy Technology Data Exchange (ETDEWEB)

    Seong, Poong Hyun; Choi, Jong Gyun; Kim, Ung Soo; Kim, Jong Hyun; Kim, Man Cheol; Lee, Seung Jun; Lee, Young Je; Ha, Jun Soo [Korea Advanced Institute of Science and Technology, Taejeon (Korea)

    2002-03-01

    For the digital systems to be applied to the nuclear industry, which has its unique conservertive to safety, reliability assessment of digital systems is a prerequisite. But, because digital systems show different failure modes from compared to existing analog systems, the existing reliability assessment method cannot be applied to digital systems. It means that a new reliability assessment method for digital systems should be developed. The goal of this study is development of reliability assessment method for digital systems on board level and related software tool. To achieve the goal, we have conducted researches on development of a database for hardware components for digital I and C systems, development of a reliability assessment model for the reliability prediction of digital systems on board level, and the applicability to KNGR digital I and C systems. We developed a database for reliability assessment of digital hardware components, a reliability assessment method for digital systems with consideration of software and hardware together, and a software tool for the reliability assessment of digital systems, which is named as RelPredic. We plan to apply the results of this study to the reliability assessment of digital systems in KNGR digital I and C systems. 13 refs., 71 figs., 31 tabs. (Author)

  12. Development of component failure data for seismic risk analysis

    International Nuclear Information System (INIS)

    Fray, R.R.; Moulia, T.A.

    1981-01-01

    This paper describes the quantification and utilization of seismic failure data used in the Diablo Canyon Seismic Risk Study. A single variable representation of earthquake severity that uses peak horizontal ground acceleration to characterize earthquake severity was employed. The use of a multiple variable representation would allow direct consideration of vertical accelerations and the spectral nature of earthquakes but would have added such complexity that the study would not have been feasible. Vertical accelerations and spectral nature were indirectly considered because component failure data were derived from design analyses, qualification tests and engineering judgment that did include such considerations. Two types of functions were used to describe component failure probabilities. Ramp functions were used for components, such as piping and structures, qualified by stress analysis. 'Anchor points' for ramp functions were selected by assuming a zero probability of failure at code allowable stress levels and unity probability of failure at ultimate stress levels. The accelerations corresponding to allowable and ultimate stress levels were determined by conservatively assuming a linear relationship between seismic stress and ground acceleration. Step functions were used for components, such as mechanical and electrical equipment, qualified by testing. Anchor points for step functions were selected by assuming a unity probability of failure above the qualification acceleration. (orig./HP)

  13. Development of a skeletal multi-component fuel reaction mechanism based on decoupling methodology

    International Nuclear Information System (INIS)

    Mohan, Balaji; Tay, Kun Lin; Yang, Wenming; Chua, Kian Jon

    2015-01-01

    Highlights: • A compact multi-component skeletal reaction mechanism was developed. • Combined bio-diesel and PRF mechanism was proposed. • The mechanism consists of 68 species and 183 reactions. • Well validated against ignition delay times, flame speed and engine results. - Abstract: A new coupled bio-diesel surrogate and primary reference fuel (PRF) oxidation skeletal mechanism has been developed. The bio-diesel surrogate sub-mechanism consists of oxidation sub-mechanisms of Methyl decanoate (MD), Methyl 9-decenoate (MD9D) and n-Heptane fuel components. The MD and MD9D are chosen to represent the saturated and unsaturated methyl esters respectively in bio-diesel fuels. Then, a reduced iso-Octane oxidation sub-mechanism is added to the bio-diesel surrogate sub-mechanism. Then, all the sub-mechanisms are integrated to a reduced C_2–C_3 mechanism, detailed H_2/CO/C_1 mechanism and reduced NO_x mechanism based on decoupling methodology. The final mechanism consisted of 68 species and 183 reactions. The mechanism was well validated with shock-tube ignition delay times, laminar flame speed and 3D engine simulations.

  14. Development and application of a welding procedure for remote repair of Magnox reactor internal components

    International Nuclear Information System (INIS)

    Morgan-Warren, E.J.

    1988-01-01

    This paper summarises the development and application of an all-welding repair method for reinforcing magnox reactor internal components. The development was dominated by the necessity for remote operation and the environmental constraints, in particular the oxide covering on the steel reactor structure. The choice of welding process is described, together with the development of the procedure for remote operation. The quality assurance procedure, including the verification of the technique and monitoring of the repair operation, is discussed. (author)

  15. KfK, Institute for Reactor Components. Results of research and development activities in 1989

    International Nuclear Information System (INIS)

    1990-03-01

    R and D activities at IRB (Institut fuer Reaktorbauelemente - Institute for Reactor Components) are dedicated to thermodynamics and fluid dynamics. Emphasis is on the design of nuclear reactor and fusion reactor components. Environmental engineering was added recently. Most activities are applications-oriented. Fundamental investigations focus on energy research and energy technology. The activities are carried out in the framework of different projects (PKF/nuclear fusion, PSF/nuclear safety, PSU/pollution control). Points of main effort are the development of basic liquid-metal-cooled blanket solutions, investigations on natural convection in reactor tanks, and the cooling properties of future containments for pressurized water reactors in the case of nuclear fusion accidents. (orig./GL) [de

  16. Refractory alloy component fabrication

    International Nuclear Information System (INIS)

    Young, W.R.

    1984-01-01

    Purpose of this report is to describe joining procedures, primarily welding techniques, which were developed to construct reliable refractory alloy components and systems for advanced space power systems. Two systems, the Nb-1Zr Brayton Cycle Heat Receiver and the T-111 Alloy Potassium Boiler Development Program, are used to illustrate typical systems and components. Particular emphasis is given to specific problems which were eliminated during the development efforts. Finally, some thoughts on application of more recent joining technology are presented. 78 figures

  17. Sandia_HighTemperatureComponentEvaluation_2015

    Energy Technology Data Exchange (ETDEWEB)

    Cashion, Avery T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-03-01

    The objective of this project is to perform independent evaluation of high temperature components to determine their suitability for use in high temperature geothermal tools. Development of high temperature components has been increasing rapidly due to demand from the high temperature oil and gas exploration and aerospace industries. Many of these new components are at the late prototype or first production stage of development and could benefit from third party evaluation of functionality and lifetime at elevated temperatures. In addition to independent testing of new components, this project recognizes that there is a paucity of commercial-off-the-shelf COTS components rated for geothermal temperatures. As such, high-temperature circuit designers often must dedicate considerable time and resources to determine if a component exists that they may be able to knead performance out of to meet their requirements. This project aids tool developers by characterization of select COTS component performances beyond published temperature specifications. The process for selecting components includes public announcements of project intent (e.g., FedBizOps), direct discussions with candidate manufacturers,and coordination with other DOE funded programs.

  18. B cells exposed to enterobacterial components suppress development of experimental colitis

    DEFF Research Database (Denmark)

    Schmidt, Esben Gjerløff Wedebye; Larsen, Hjalte List; Kristensen, Nanna Ny

    2012-01-01

    ). RESULTS: We demonstrate that splenic B cells exposed to ebx produce large amounts of IL-10 in vitro and express CD1d and CD5 previously known to be associated with regulatory B cells. In SCID mice transplanted with colitogenic CD4(+) CD25(-) T cells, co-transfer of ebx-B cells significantly suppressed...... development of colitis. Suppression was dependent on B cell-derived IL-10, as co-transfer of IL-10 knockout ebx-B cells failed to suppress colitis. Ebx-B cell-mediated suppression of colitis was associated with a decrease in interferon gamma (IFN-¿)-producing T(H) 1 cells and increased frequencies of Foxp3......-expressing T cells. CONCLUSIONS: These data demonstrate that splenic B cells exposed to enterobacterial components acquire immunosuppressive functions by which they can suppress development of experimental T cell-mediated colitis in an IL-10-dependent way. (Inflamm Bowel Dis 2011;)....

  19. Gypsy moth IPM

    Science.gov (United States)

    Michael L. McManus; Andrew M. Liebhold

    2009-01-01

    Over the last 50 years, North American forests have been inundated by a multitude of alien pest invasions. Among these, noteworthy invaders include the hemlock woolly adelgid (Adelges tsugae), emerald ash borer (Agrilus planipennis), chestnut blight and Dutch elm disease. These species have greatly altered both the ecological and...

  20. Development of a method of lifetime assessment of power plant components under complex multi-axial vibration loads

    International Nuclear Information System (INIS)

    Fesich, Thomas M.

    2012-01-01

    In general, technical components are loaded and stressed by forces and moments both constant and variable over time. Multi-axial stress conditions can arise as a function of the load on, and/or the geometry of, a component. Assessing the impact on stability of multi-axial stress conditions is a problem for which no generally valid solution has as yet been found, especially when loads and stresses vary over time. This is also due to the fact that the development over time of stresses can give rise to very complex stress conditions. Assessing the lifetime of power plant components subjected to complex vibration loads and stresses often is not reliable if performed by means of conventional codes and approaches, or is associated with high degrees of conservatism. The MPA AIM-Life concept developed at the Stuttgart MPA/IMWF, which is an advanced and verified strength hypothesis based on energy considerations, allows such assessments to be made more reliably, numerically efficient, and avoiding excessive conservatism. (orig.)

  1. System Cost Analysis for an Interior Permanent Magnet Motor

    Energy Technology Data Exchange (ETDEWEB)

    Peter Campbell

    2008-08-01

    The objective of this program is to provide an assessment of the cost structure for an interior permanent magnet ('IPM') motor which is designed to meet the 2010 FreedomCAR specification. The program is to evaluate the range of viable permanent magnet materials for an IPM motor, including sintered and bonded grades of rare earth magnets. The study considers the benefits of key processing steps, alternative magnet shapes and their assembly methods into the rotor (including magnetization), and any mechanical stress or temperature limits. The motor's costs are estimated for an annual production quantity of 200,000 units, and are broken out into such major components as magnetic raw materials, processing and manufacturing. But this is essentially a feasibility study of the motor's electromagnetic design, and is not intended to include mechanical or thermal studies as would be done to work up a selected design for production.

  2. Consumers' preferences for Integrated Pest Management: Experimental insights

    OpenAIRE

    Biguzzi, Coralie; Ginon, Emilie; Gomez-y-Paloma, Sergio; Langrell, Sergio; Lefebvre, Marianne; Marette, Stephan; Mateu, Guillermo; Sutan, Angela

    2014-01-01

    This article aims to analyse consumers' preferences for Integrated Pest Management (IPM), in comparison to conventional and organic food products. It analyses the case of tomatoes, based on experimental data of 189 French consumers. We find that consumers are more interested in information on the production system than on the characteristics of the final product in terms of pesticide residue levels, and more in IPM than organic. While information on IPM production increases consumers' willing...

  3. RNA Binding Proteins in Eye Development and Disease: Implication of Conserved RNA Granule Components

    Science.gov (United States)

    Dash, Soma; Siddam, Archana D.; Barnum, Carrie E.; Janga, Sarath Chandra

    2016-01-01

    The molecular biology of metazoan eye development is an area of intense investigation. These efforts have led to the surprising recognition that although insect and vertebrate eyes have dramatically different structures, the orthologs or family members of several conserved transcription and signaling regulators such as Pax6, Six3, Prox1 and Bmp4 are commonly required for their development. In contrast, our understanding of post-transcriptional regulation in eye development and disease, particularly regarding the function of RNA binding proteins (RBPs), is limited. We examine the present knowledge of RBPs in eye development in the insect model Drosophila, as well as several vertebrate models such as fish, frog, chicken and mouse. Interestingly, of the 42 RBPs that have been investigated with for their expression or function in vertebrate eye development, 24 (~60%) are recognized in eukaryotic cells as components of RNA granules such as Processing bodies (P-bodies), Stress granules, or other specialized ribonucleoprotein (RNP) complexes. We discuss the distinct developmental and cellular events that may necessitate potential RBP/RNA granule-associated RNA regulon models to facilitate post-transcriptional control of gene expression in eye morphogenesis. In support of these hypotheses, three RBPs and RNP/RNA granule components Tdrd7, Caprin2 and Stau2 are linked to ocular developmental defects such as congenital cataract, Peters anomaly and microphthalmia in human patients or animal models. We conclude by discussing the utility of interdisciplinary approaches such as the bioinformatics tool iSyTE (integrated Systems Tool for Eye gene discovery) to prioritize RBPs for deriving post-transcriptional regulatory networks in eye development and disease. PMID:27133484

  4. Development of the plasma facing components for the dome-liner component of the ITER divertor

    International Nuclear Information System (INIS)

    Luconi, U.; Di Marco, M.; Federici, A.; Grattarola, M.; Gualco, G.; Larrea, J.M.; Merola, M.; Ozzano, C.; Pasquale, G.

    2005-01-01

    On the basis of the design and the specification of the dome-liner elaborated by EFDA, a manufacturing route based on high temperature brazing has been developed and proved by means of the fabrication and testing of several samples and mock-ups. The dome is protected with tungsten armour tiles joined onto heat sinks obtained from a bimetallic plate made of precipitation hardened copper-chromium-zirconium alloy and stainless steel realized by explosion bonding. The brazed joint between the tungsten tiles and the heat sink has been qualified by means of thermal fatigue tests on small-scale mock-ups in reactor relevant conditions. The properties of the explosion bonding joint between the front copper alloy plate to the rear steel backing has been assessed by means of an extensive metallurgical and mechanical test program according to the specification provided by EFDA. The dimensional stability during the fabrication route has been investigated by means of the realization of a relevant curved component that has been dimensionally tested after the completion of each step of the manufacturing route. The results of the experimental activity are presented and discussed in this paper

  5. Development of low temperature solid state joining technology of dissimilar for nuclear heat exchanger tube components

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-08-15

    By conventional fusion welding process (TIG), a realization of reliable and sound joints for the nuclear heat exchanger components is very difficult, especially for the parts comprising of the dissimilar metal couples (Ti-STS, Ti-Cu alloy etc.). This is mainly attributed to the formation of brittle intermetallics (Ti{sub x}Cu{sub y}, Ti{sub x}Fe{sub y}, Ti{sub x}Ni{sub y} etc.) and wide difference in physical properties. Moreover, it usually employs very high thermal input, so making it difficult to obtain sound joints due to generations of high residual stresses and degradation of the adjacent base metals, even for similar metal combinations. In this project, the low temperature solid-state joining technology was established by developing new alloy fillers, e.g. the multi-component eutectic based alloys or amorphous alloys, and thereby lowering the joining temperature down to {approx}800 .deg. C without affecting the structural properties of base metals. Based on a low temperature joining, the interlayer engineering technology was then developed to be able to eliminate the brittleness of the joints for strong Ti-STS dissimilar joints, and the diffusion brazing technology of Ti-Ti with a superior joining strength and corrosion-resistance comparable to those of base metal were developed. By using those developed technologies, the joining procedures feasible for the heat exchanger components were finally established for the dissimilar metal joints including Ti tube sheet to super STS tube, Ti tube sheet to super STS tube sheet, and the joints of the Ti tube to Ti tube sheet

  6. Development of safety factors to be used for evaluation of cracked nuclear components

    International Nuclear Information System (INIS)

    Brickstad, B.; Bergman, M.

    1996-10-01

    A modified concept for safety evaluation is introduced which separately accounts for the failure mechanisms fracture and plastic collapse. For application on nuclear components a set of safety factors are also proposed that retain the safety margins expressed in ASME, section III and XI. By performing comparative studies of the acceptance levels for surface cracks in pipes and a pressure vessel, it is shown that some of the anomalies connected with the old safety procedures are removed. It is the authors belief that the outlined safety evaluation procedure has the capability of treating cracks in a consistent way and that the procedure together with the proposed safety factors fulfill the basic safety requirements for nuclear components. Hopefully, it is possible in the near future to develop a probabilistic safety assessment procedure in Sweden, which enables a systematic treatment of uncertainties in the involved data. 14 refs

  7. Components of Sexual Identity

    Science.gov (United States)

    Shively, Michael G.; DeCecco, John P.

    1977-01-01

    This paper examines the four components of sexual identity: biological sex, gender identity, social sex-role, and sexual orientation. Theories about the development of each component and how they combine and conflict to form the individual's sexual identity are discussed. (Author)

  8. Development of methodology for component testing under impact loading for space applications

    Science.gov (United States)

    Church, Phillip; Taylor, Nicholas; Perkinson, Marie-Claire; Wishart, Alex; Vijendran, Sanjay; Braithwaite, Chris

    2017-06-01

    A number of recent studies have highlighted the scientific benefits of penetrator technology in conducting exploration on other planetary bodies and moons within the solar system. Such a ``hard landing'' approach is cheaper and easier than the traditional ``soft landing'' method. However it is necessary for the science package of such a mission to withstand the rapid decelerations that will occur upon impact. This paper outlines an approach that has been developed to simulate the loading appropriate to Europa and also to monitor component performance before, during and after the impact.

  9. Analysis and Modeling of the Galvanic Skin Response Spontaneous Component in the context of Intelligent Biofeedback Systems Development

    Science.gov (United States)

    Unakafov, A.

    2009-01-01

    The paper presents an approach to galvanic skin response (GSR) spontaneous component analysis and modeling. In the study a classification of biofeedback training methods is given, importance of intelligent methods development is shown. The INTENS method, which is perspective for intellectualization, is presented. An important problem of biofeedback training method intellectualization - estimation of the GSR spontaneous component - is solved in the main part of the work. Its main characteristics are described; results of GSR spontaneous component modeling are shown. Results of small research of an optimum material for GSR probes are presented.

  10. Development and test of prototype components for ITER; Entwicklung und Test von Prototypkomponenten fuer ITER

    Energy Technology Data Exchange (ETDEWEB)

    Biel, Wolfgang; Behr, Wilfried; Castano-Bardawil, David; and others

    2015-08-15

    The scientific program of the project is divided into the following partial projects: (1.) ITER Diagnostic Port Plug for the charge-exchange spectroscopy (CXRS) with the subthemes: (a) Development of prototypes for critical mechanical components, (b) development of a roboter for the laser welding of vacuum seals and pipings at the Port Plug, (c) mirror studies, (d) CXRS prototype spectrometer, (2.) ITER tritium retention diagnostics (TR), (3.) ITER disruption mitigation ventile (DMV).

  11. Development of software for computing forming information using a component based approach

    Directory of Open Access Journals (Sweden)

    Kwang Hee Ko

    2009-12-01

    Full Text Available In shipbuilding industry, the manufacturing technology has advanced at an unprecedented pace for the last decade. As a result, many automatic systems for cutting, welding, etc. have been developed and employed in the manufacturing process and accordingly the productivity has been increased drastically. Despite such improvement in the manufacturing technology, however, development of an automatic system for fabricating a curved hull plate remains at the beginning stage since hardware and software for the automation of the curved hull fabrication process should be developed differently depending on the dimensions of plates, forming methods and manufacturing processes of each shipyard. To deal with this problem, it is necessary to create a “plug-in” framework, which can adopt various kinds of hardware and software to construct a full automatic fabrication system. In this paper, a framework for automatic fabrication of curved hull plates is proposed, which consists of four components and related software. In particular the software module for computing fabrication information is developed by using the ooCBD development methodology, which can interface with other hardware and software with minimum effort. Examples of the proposed framework applied to medium and large shipyards are presented.

  12. Structure and function of the interphotoreceptor matrix surrounding retinal photoreceptor cells.

    Science.gov (United States)

    Ishikawa, Makoto; Sawada, Yu; Yoshitomi, Takeshi

    2015-04-01

    The interphotoreceptor matrix (IPM) is a highly organized structure with interconnected domains surrounding cone and rod photoreceptor cells and extends throughout the subretinal space. Based on known roles of the extracellular matrix in other tissues, the IPM is thought to have several prominent functions including serving as a receptor for growth factors, regulating retinoid transport, participating in cytoskeletal organization in surrounding cells, and regulation of oxygen and nutrient transport. In addition, a number of studies suggest that the IPM also may play a significant role in the etiology of retinal degenerative disorders. In this review, we describe the present knowledge concerning the structure and function of the IPM under physiological and pathological conditions. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  13. Understanding and addressing contraceptive stockouts to increase family planning access and uptake in Senegal.

    Science.gov (United States)

    Hasselback, Leah; Dicko, Modibo; Viadro, Claire; Ndour, Soussaba; Ndao, Oumy; Wesson, Jennifer

    2017-05-26

    Senegal's government has pledged to reduce contraceptive stockouts, which have been frequent in public sector health facilities. An innovative distribution system called the Informed Push Model (IPM) addresses supply chain obstacles through direct regional-to-facility delivery of contraceptives and use of private sector logistics operators. Following promising pilot results, Senegal's Ministry of Health and Social Action committed to a three-year (2013-2016) expansion of IPM to all public health facilities nationwide. From August 2014-July 2016, IPM's six logisticians made 29,319 visits to restock public sector health facilities. During these regular facility visits, the logisticians conducted a physical inventory to flag contraceptive stockouts (no usable stock of any single method available) and asked facility staff to identify the primary reason for documented stockouts. Our descriptive study examines stockout trends over the course of IPM scale-up. We also describe trends in contraceptive consumption over the three-year period using facility-level data collected by the logisticians. Contraceptive consumption rose by 91% over 35 months in the first three IPM regions, and by 118% in the next five regions (over 26 months). After scale-up to 1,394 health facilities, nationwide consumption rose by 48% over one year. On average, logisticians documented stockouts at fewer than 2% of facility visits. In comparison, two pre-IPM studies in 2011 identified stockouts of selected modern contraceptives at 60-70% of facilities visited, with 84% of clients reporting stockouts in the past year. Six factors (including consumption spikes, IPM-preventable causes, and community outreach) explained most remaining stockouts. IPM has been highly successful in ensuring full availability of contraceptives across regions and health facilities. The model also has facilitated the flow of essential data on consumption and stockouts from facilities up to district, regional, and central

  14. Risk assessment of maize damage by wireworms (Coleoptera: Elateridae) as the first step in implementing IPM and in reducing the environmental impact of soil insecticides.

    Science.gov (United States)

    Furlan, L; Contiero, B; Chiarini, F; Colauzzi, M; Sartori, E; Benvegnù, I; Fracasso, F; Giandon, P

    2017-01-01

    A survey of maize fields was conducted in northeast Italy from 1986 to 2014, resulting in a dataset of 1296 records including information on wireworm damage to maize, plant-attacking species, agronomic characteristics, landscape and climate. Three wireworm species, Agriotes brevis Candeze, A. sordidus Illiger and A. ustulatus Schäller, were identified as the dominant pest species in maize fields. Over the 29-year period surveyed, no yield reduction was observed when wireworm plant damage was below 15 % of the stand. A preliminary univariate analysis of risk assessment was applied to identify the main factors influencing the occurrence of damage. A multifactorial model was then applied by using the significant factors identified. This model allowed the research to highlight the strongest factors and to analyse how the main factors together influenced damage risk. The strongest factors were: A. brevis as prevalent damaging species, soil organic matter content >5 %, rotation including meadows and/or double crops, A. sordidus as prevalent damaging species, and surrounding landscape mainly meadows, uncultivated grass and double crops. The multifactorial model also showed how the simultaneous occurrence of two or more of the aforementioned risk factors can conspicuously increase the risk of wireworm damage to maize crops, while the probability of damage to a field with no-risk factors is always low (<1 %). These results make it possible to draw risk maps to identify low-risk and high-risk areas, a first step in implementing bespoke IPM procedures in an attempt to reduce the impact of soil insecticides significantly.

  15. Development and setting of a new system for advanced rheocast components

    International Nuclear Information System (INIS)

    Rosso, Mario; Peter, I.; Calosso, F.

    2011-01-01

    This paper presents an overview of alternative methods of production of enhanced performance Al-based alloys components for critical areas. In particular, a new rheocasting system, suitable for the manufacturing of high performance industrial components has been considered. The aforementioned method allows obtaining component quickly and results a more convenient process, from economical point of view than other innovative processes. Two series of components have been produced with A356 and A357 alloys, then have been heat treated using T5 and T6 treatments. On polished transverse sections of samples the microstructure of the alloy has been observed. Their soundness has been previously certified by non destructive tests. Samples for tensile and three point bending tests have been machined directly from the produced components. On the fractured samples, fracture surface analysis has been performed in order to analyze and evaluate the influence of the process and of the alloy on the fracture behaviour.

  16. Study of microarthopod communities to assess soil quality in different managed vineyards

    Science.gov (United States)

    Gagnarli, E.; Goggioli, D.; Tarchi, F.; Guidi, S.; Nannelli, R.; Vignozzi, N.; Valboa, G.; Lottero, M. R.; Corino, L.; Simoni, S.

    2015-01-01

    Land use influences the abundance and diversity of soil arthropods. The evaluation of the impact of different management strategies on soil quality is increasingly requested. The determination of communities' structures of edaphic fauna can represent an efficient tool. In this study, in some vineyards in Piedmont (Italy), the effects of two different management systems, organic and integrated pest management (IPM), on soil biota were evaluated. As microarthropods living in soil surface are an important component of soil ecosystem interacting with all the other system components, a multi disciplinary approach was adopted by characterizing also some soil physical and chemical characteristics (soil texture, soil pH, total organic carbon, total nitrogen, calcium carbonate). Soil samplings were carried out on Winter 2011 and Spring 2012. All specimens were counted and determined up to the order level. The biological quality of the soil was defined through the determination of ecological indices, such as QBS-ar, species richness and indices of Shannon-Weaver, Pielou, Margalef and Simpson. The mesofauna abundance was affected by both the type of management and the soil texture. The analysis of microarthropod communities by QBS-ar showed higher values in organic than in IPM managed vineyards; in particular, the values registered in organic vineyards were similar to those characteristic of preserved soils.

  17. Pennsylvania: Penn State University Integrated Pest Management Project (A Former EPA CARE Project)

    Science.gov (United States)

    Penn State University (PSU) is the recipient of a Level II CARE cooperative agreement targeting environmental risks in Philadelphia communities. PSU is involved in developing IPM management practices recommendations and policies.

  18. Development of an object oriented nodal code using the refined AFEN derived from the method of component decomposition

    International Nuclear Information System (INIS)

    Noh, J. M.; Yoo, J. W.; Joo, H. K.

    2004-01-01

    In this study, we invented a method of component decomposition to derive the systematic inter-nodal coupled equations of the refined AFEN method and developed an object oriented nodal code to solve the derived coupled equations. The method of component decomposition decomposes the intra-nodal flux expansion of a nodal method into even and odd components in three dimensions to reduce the large coupled linear system equation into several small single equations. This method requires no additional technique to accelerate the iteration process to solve the inter-nodal coupled equations, since the derived equations can automatically act as the coarse mesh re-balance equations. By utilizing the object oriented programming concepts such as abstraction, encapsulation, inheritance and polymorphism, dynamic memory allocation, and operator overloading, we developed an object oriented nodal code that can facilitate the input/output and the dynamic control of the memories, and can make the maintenance easy. (authors)

  19. DETERMINAN KUALITAS PEMBANGUNAN MANUSIA DI KABUPATEN/KOTA PROVINSI JAWA TENGAH

    Directory of Open Access Journals (Sweden)

    Agung Yudhi Pramono

    2017-06-01

    Full Text Available Penelitian ini bertujuan untuk menganalisis seberapa besar pengaruh pengeluaran pemerintah daerah sektor pendidikan, pengeluaran pemerintah daerah sektor kesehatan, rasio ketergantungan penduduk dan pendapatan perkapita terhadap pembangunan manusia yang diukur dengan IPM. Populasi penelitian terdiri dari 35 Kabupaten/Kota di Provinsi Jawa Tengah, menggunakan data sekunder dari Badan Pusat Statistik Provinsi Jawa Tengah dan Biro Keuangan Sekretaris Daerah Provinsi Jawa Tengah dalam periode 2009 sampai 2013. Variabel penelitian ini indeks pembangunan manusia, pengeluran pemerintah daerah sektor pendidikan, pengeluaran pemerintah daerah sektor kesehatan, rasio ketergantungan penduduk, dan pendapatan perkapita. Dalam penelitian ini, digunakan metode penelitian kuantitatif dengan menggunakan analisis regresi data panel model efek tetap (FEM dengan metode Generalized Least Square (GLS. Hasil penelitian ini dapat diketahui bahwa pengeluaran pemerintah daerah sektor pendidikan berpengaruh positif dan signifikan terhadap IPM, pengeluaran pemerintah daerah sektor kesehatan berpengaruh positif dan signifikan terhadap IPM, rasio ketergantungan penduduk berpengaruh negatif dan signifikan terhadap IPM, sementara pendapatan perkapita tidak berpengaruh secara signifikan terhadap IPM. This research has purpose to analyze how much influence of the local government expenditure in educational sector, local government expenditure in health sector, dependency ratio, and per capita income of a human development measured by HDI. the population of this research consists of 35 regionals in Central Java and region bureau money secretary of Central Java province among 2009 and 2013 period. the variables used in this research are HDI, local government expenditure in educational sector, local government expenditure in health sector, dependency ratio, and per capita income. in this research, quantitative and regression analysis of Fixed Effect Model is used as well as

  20. Methodology Development for Passive Component Reliability Modeling in a Multi-Physics Simulation Environment

    Energy Technology Data Exchange (ETDEWEB)

    Aldemir, Tunc [The Ohio State Univ., Columbus, OH (United States); Denning, Richard [The Ohio State Univ., Columbus, OH (United States); Catalyurek, Umit [The Ohio State Univ., Columbus, OH (United States); Unwin, Stephen [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-01-23

    Reduction in safety margin can be expected as passive structures and components undergo degradation with time. Limitations in the traditional probabilistic risk assessment (PRA) methodology constrain its value as an effective tool to address the impact of aging effects on risk and for quantifying the impact of aging management strategies in maintaining safety margins. A methodology has been developed to address multiple aging mechanisms involving large numbers of components (with possibly statistically dependent failures) within the PRA framework in a computationally feasible manner when the sequencing of events is conditioned on the physical conditions predicted in a simulation environment, such as the New Generation System Code (NGSC) concept. Both epistemic and aleatory uncertainties can be accounted for within the same phenomenological framework and maintenance can be accounted for in a coherent fashion. The framework accommodates the prospective impacts of various intervention strategies such as testing, maintenance, and refurbishment. The methodology is illustrated with several examples.

  1. Methodology Development for Passive Component Reliability Modeling in a Multi-Physics Simulation Environment

    International Nuclear Information System (INIS)

    Aldemir, Tunc; Denning, Richard; Catalyurek, Umit; Unwin, Stephen

    2015-01-01

    Reduction in safety margin can be expected as passive structures and components undergo degradation with time. Limitations in the traditional probabilistic risk assessment (PRA) methodology constrain its value as an effective tool to address the impact of aging effects on risk and for quantifying the impact of aging management strategies in maintaining safety margins. A methodology has been developed to address multiple aging mechanisms involving large numbers of components (with possibly statistically dependent failures) within the PRA framework in a computationally feasible manner when the sequencing of events is conditioned on the physical conditions predicted in a simulation environment, such as the New Generation System Code (NGSC) concept. Both epistemic and aleatory uncertainties can be accounted for within the same phenomenological framework and maintenance can be accounted for in a coherent fashion. The framework accommodates the prospective impacts of various intervention strategies such as testing, maintenance, and refurbishment. The methodology is illustrated with several examples.

  2. PERANCANGAN DAN IMPLEMENTASI SISTEM PENGUKURAN KINERJA DENGAN METODE INTEGRATED PERFORMANCE MEASUREMENT SYSTEMS (Studi Kasus: Jurusan Teknik Mesin Universitas Mataram

    Directory of Open Access Journals (Sweden)

    Bambang Syairuddin

    2007-01-01

    Full Text Available To assure the quality of education in the Department of Mechanical Engineering, we need to design an integrated performance measurement system. For that purpose, we used the IPMS (Integrated Performance Measurement Systems method. Using the IPMS method, Key Performance Indicators (KPIs of the Department of Mechanical Engineering were determined by pursuant to stakeholder requirement through four steps. Those are identifying the stakeholder requirement, external monitor, stipulating objectives, and identification of KPIs. Performance measurement system with the IPMS method in the Department of Mechanical Engineering of Mataram University can be identified into 38 KPIs grouped in 9 criterias of performance of the Department of Mechanical Engineering, that are curriculum, student, financial, human resources, administration academic, teaching and learning, alumnus, evaluation and operation, and external party. Abstract in Bahasa Indonesia : Untuk menjamin kualitas pendidikan di Jurusan Teknik Mesin, diperlukan sebuah rancangan sistem pengukuran kinerja (SPK yang terintegrasi dengan metode IPMS (Integrated Performance Measurement Systems. Dengan metode IPMS, Key Performance Indicators (KPI Jurusan Teknik Mesin ditentukan berdasarkan stakeholder requirement melalui empat tahapan yaitu; identifikasi stakeholder requirement, external monitor, penetapan objectives, dan identifikasi KPIs. Hasil perancangan SPK di Jurusan Teknik Mesin Universitas Mataram, dapat mengidentifikasi 38 KPIs yang dikelompokkan dalam 9 kriteria kinerja Jurusan Teknik Mesin, yaitu; kurikulum, mahasiswa, finansial, SDM, administrasi akademik, proses pembelajaran, alumni, evaluasi dan pengendalian, dan external party. Kata Kunci : Sistem Pengukuran Kinerja, IPMS, Teknik Mesin Unram.

  3. Towards Prognostics for Electronics Components

    Data.gov (United States)

    National Aeronautics and Space Administration — Electronics components have an increasingly critical role in avionics systems and in the development of future aircraft systems. Prognostics of such components is...

  4. Management status of end-of-life vehicles and development strategies of used automotive electronic control components recycling industry in China.

    Science.gov (United States)

    Wang, Junjun; Chen, Ming

    2012-11-01

    Recycling companies play a leading role in the system of end-of-life vehicles (ELVs) in China. Automotive manufacturers in China are rarely involved in recycling ELVs, and they seldom provide dismantling information for recycling companies. In addition, no professional shredding plant is available. The used automotive electronic control components recycling industry in China has yet to take shape because of the lack of supporting technology and profitable models. Given the rapid growth of the vehicle population and electronic control units in automotives in China, the used automotive electronic control components recycling industry requires immediate development. This paper analyses the current recycling system of ELVs in China and introduces the automotive product recycling technology roadmap as well as the recycling industry development goals. The strengths, weaknesses, opportunities and challenges of the current used automotive electronic control components recycling industry in China are analysed comprehensively based on the 'strengths, weaknesses, opportunities and threats' (SWOT) method. The results of the analysis indicate that this recycling industry responds well to all the factors and has good opportunities for development. Based on the analysis, new development strategies for the used automotive electronic control components recycling industry in accordance with the actual conditions of China are presented.

  5. Critical elements of supplier development in the Malaysian automobile industry : Parts and components procurement and supplier development Practice at Proton【Article】

    OpenAIRE

    Abdullah, Rashid; Maharjan, Keshav Lall

    2003-01-01

    Supplier development is defined as any effort of a buying firm with regard to its supplier to increasethe performance and/or capabilities of the supplier to meet the buying firm's supply needs. The procure-ment practice of the buyer is critical and acts as a window to nurture the supplier development effort, itis also crucial in determining the type of relationship that the company has with its suppliers. This paperexamines the procurement practice at PROTON for parts and component inputs at ...

  6. Development of a component centered fault monitoring and diagnosis knowledge based system for space power system

    Science.gov (United States)

    Lee, S. C.; Lollar, Louis F.

    1988-01-01

    The overall approach currently being taken in the development of AMPERES (Autonomously Managed Power System Extendable Real-time Expert System), a knowledge-based expert system for fault monitoring and diagnosis of space power systems, is discussed. The system architecture, knowledge representation, and fault monitoring and diagnosis strategy are examined. A 'component-centered' approach developed in this project is described. Critical issues requiring further study are identified.

  7. Development of an analytical approach to study a three-component hetero-association by means of spectrophotometry.

    Science.gov (United States)

    Buchelnikov, Anatoly S; Khrustalev, Alexander F; Evstigneev, Maxim P

    2013-01-01

    A case of 1:m:n complexation in a three-component system containing any possible heterocomplexes formed between the non-self-aggregating, absorbing ligand A and two self-aggregating, non-absorbing ligands B and C was considered for the first time in an application for molecular spectroscopy. All expressions necessary for full quantitative analysis of experimental data in three-component mixtures were obtained, viz., the law of conservation of mass and the expression for an experimentally observed parameter. These expressions can be directly utilized in mathematical software for performing standard curve-fitting procedures or solutions of specific tasks such as calculations of the concentration of various types of complexes. The numerical test of the 1:m:n model, accomplished with the aid of ultraviolet-visible light experimental data in a three-component system (proflavine-caffeine-nicotinamide), proved the validity of the developed approach.

  8. Results of 1989/90 research and development activities at KfK Institute for Reactor Components

    International Nuclear Information System (INIS)

    1991-03-01

    R and D activities at IRB (Institut fuer Reaktorbauelemente - Institute for Reactor Components) are dedicated to thermodynamics and fluid dynamics. Emphasis is on the design of nuclear reactor and fusion reactor components. Environmental engineering was added recently. Most activities are applications-oriented. Fundamental investigations focus on energy research and energy technology. The activities are carried out in the framework of different projects (PKF/nuclear fusion, PSF/nuclear safety, PSU/pollution control). Points of main effort are the development of basic liquid-metal-cooled blanket solutions, investigations on natural convection in reactor ranks, and the cooling properties of future containments for pressurized water reactors in the case of nuclear fusion accidents. (orig./GL) [de

  9. Development of measuring and control systems for underwater cutting of radioactive components

    International Nuclear Information System (INIS)

    Drews, P.; Fuchs, K.

    1990-01-01

    Shutdown and dismantling of nuclear power plants requires special techniques to decommission the radioactive components involved. For reasons of safety, decommissioning of components under water can be advantageous because of the radioactive shielding effect of water. In this project, research activities and developmental works focused on the realization of different sensor systems and their adaptation to cutting tasks. A new image-processing system has been developed in addition to the use of a modified underwater TV camera for optical cutting process control (plasma and abrasive wheel cutting). For control of process parameters, different inductive, ultrasonic and optical sensors have been modified and tested. The investigations performed are aimed at assuring high-quality underwater cutting with the help of sensor systems specially adapted to cutting tasks, with special signal procession and evaluation through microcomputer control. It is important that special attention be paid to the reduction of interferences in image pick-up and procession. The measuring system has been designed and realized according to the consideration of the demands for underwater cutting processes. The reliability of the system was tested in conjunction with a four-axes handling system

  10. The Component-Based Application for GAMESS

    Energy Technology Data Exchange (ETDEWEB)

    Peng, Fang [Iowa State Univ., Ames, IA (United States)

    2007-01-01

    GAMESS, a quantum chetnistry program for electronic structure calculations, has been freely shared by high-performance application scientists for over twenty years. It provides a rich set of functionalities and can be run on a variety of parallel platforms through a distributed data interface. While a chemistry computation is sophisticated and hard to develop, the resource sharing among different chemistry packages will accelerate the development of new computations and encourage the cooperation of scientists from universities and laboratories. Common Component Architecture (CCA) offers an enviromnent that allows scientific packages to dynamically interact with each other through components, which enable dynamic coupling of GAMESS with other chetnistry packages, such as MPQC and NWChem. Conceptually, a cotnputation can be constructed with "plug-and-play" components from scientific packages and require more than componentizing functions/subroutines of interest, especially for large-scale scientific packages with a long development history. In this research, we present our efforts to construct cotnponents for GAMESS that conform to the CCA specification. The goal is to enable the fine-grained interoperability between three quantum chemistry programs, GAMESS, MPQC and NWChem, via components. We focus on one of the three packages, GAMESS; delineate the structure of GAMESS computations, followed by our approaches to its component development. Then we use GAMESS as the driver to interoperate integral components from the other tw"o packages, arid show the solutions for interoperability problems along with preliminary results. To justify the versatility of the design, the Tuning and Analysis Utility (TAU) components have been coupled with GAMESS and its components, so that the performance of GAMESS and its components may be analyzed for a wide range of systetn parameters.

  11. Development of acid-resistant HEPA filter components

    International Nuclear Information System (INIS)

    Terada, K.; Woodard, R.W.; Buttedahl, O.I.

    1981-01-01

    Laboratory and in-service tests of various HEPA filter media and separators were conducted to establish their relative resistances to HNO 3 -HF vapors. Filter medium of glass fiber with Nomex additive and aluminum separators with an epoxy-vinyl coating have performed quite well in the acid environment in the laboratory, and in prototype-filters placed in service in a plenum at Rocky Flats. Proprietary filters with new design and/or components were also tested in service with generally good results

  12. Independent component analysis: recent advances

    OpenAIRE

    Hyv?rinen, Aapo

    2013-01-01

    Independent component analysis is a probabilistic method for learning a linear transform of a random vector. The goal is to find components that are maximally independent and non-Gaussian (non-normal). Its fundamental difference to classical multi-variate statistical methods is in the assumption of non-Gaussianity, which enables the identification of original, underlying components, in contrast to classical methods. The basic theory of independent component analysis was mainly developed in th...

  13. A Dormant Microbial Component in the Development of Preeclampsia

    Science.gov (United States)

    Kell, Douglas B.; Kenny, Louise C.

    2016-01-01

    Preeclampsia (PE) is a complex, multisystem disorder that remains a leading cause of morbidity and mortality in pregnancy. Four main classes of dysregulation accompany PE and are widely considered to contribute to its severity. These are abnormal trophoblast invasion of the placenta, anti-angiogenic responses, oxidative stress, and inflammation. What is lacking, however, is an explanation of how these themselves are caused. We here develop the unifying idea, and the considerable evidence for it, that the originating cause of PE (and of the four classes of dysregulation) is, in fact, microbial infection, that most such microbes are dormant and hence resist detection by conventional (replication-dependent) microbiology, and that by occasional resuscitation and growth it is they that are responsible for all the observable sequelae, including the continuing, chronic inflammation. In particular, bacterial products such as lipopolysaccharide (LPS), also known as endotoxin, are well known as highly inflammagenic and stimulate an innate (and possibly trained) immune response that exacerbates the inflammation further. The known need of microbes for free iron can explain the iron dysregulation that accompanies PE. We describe the main routes of infection (gut, oral, and urinary tract infection) and the regularly observed presence of microbes in placental and other tissues in PE. Every known proteomic biomarker of “preeclampsia” that we assessed has, in fact, also been shown to be raised in response to infection. An infectious component to PE fulfills the Bradford Hill criteria for ascribing a disease to an environmental cause and suggests a number of treatments, some of which have, in fact, been shown to be successful. PE was classically referred to as endotoxemia or toxemia of pregnancy, and it is ironic that it seems that LPS and other microbial endotoxins really are involved. Overall, the recognition of an infectious component in the etiology of PE mirrors that for

  14. Motion of a Rigid Rod Rocking Back and Forth Cubic-Quintic Duffing Oscillators

    DEFF Research Database (Denmark)

    Ganji, S. S.; Barari, Amin; Karimpour, S.

    2012-01-01

    In this work, we implemented the first-order approximation of the Iteration Perturbation Method (IPM) for approximating the behavior of a rigid rod rocking back and forth on a circular surface without slipping as well as Cubic-Quintic Duffing Oscillators. Comparing the results with the exact...... solution, has led us to significant consequences. The results reveal that the IPM is very effective, simple and convenient to systems of nonlinear equations. It is predicted that IPM can be utilized as a widely applicable approach in engineering....

  15. Development of internet-based information systems using software components with the emphasis on the application in the military organization

    Directory of Open Access Journals (Sweden)

    Miloš J. Pejanović

    2011-01-01

    Full Text Available The development of personal computers and Internet technology causes continuous changes in methodological approaches and concepts of development of information systems. Most existing information systems, due to their heterogeneity, have a problem of integration of subsystems. In order to overcome this problem, software vendors offer different solutions. In this work we explore different approaches and propose an optimal way, with a special emphasis on its application in the military organization. By applying modern approaches in the development of information systems on the concept of distributed component systems, we come to the set of proposed solutions from different manufacturers. The solutions are related to the mechanisms which should ensure that components written in different languages cooperate with each other in heterogeneous systems that are in different nodes in the computer network. This work describes the concept of component distributed information systems of Internet technology and their capabilities and offers a solution specifying the implementation environment in the military organization. Access to the development of information systems In the development of information systems, an important role is given to the choice of appropriate methods and tools. For large systems such as military organizations, standardized procedures and methodologies for the development of information systems are recommended. There are different methodological approaches in the development of information systems: a systematic integrated approach to development (from design, implementation to implementation and maintenance and development of information systems as technical - technological structures (standard computer and network service. The combination of these two approaches leads to the concept of 'open systems' that allow different standards and IT services to operate on these systems. The UML system description of the process of software

  16. Generalized structured component analysis a component-based approach to structural equation modeling

    CERN Document Server

    Hwang, Heungsun

    2014-01-01

    Winner of the 2015 Sugiyama Meiko Award (Publication Award) of the Behaviormetric Society of Japan Developed by the authors, generalized structured component analysis is an alternative to two longstanding approaches to structural equation modeling: covariance structure analysis and partial least squares path modeling. Generalized structured component analysis allows researchers to evaluate the adequacy of a model as a whole, compare a model to alternative specifications, and conduct complex analyses in a straightforward manner. Generalized Structured Component Analysis: A Component-Based Approach to Structural Equation Modeling provides a detailed account of this novel statistical methodology and its various extensions. The authors present the theoretical underpinnings of generalized structured component analysis and demonstrate how it can be applied to various empirical examples. The book enables quantitative methodologists, applied researchers, and practitioners to grasp the basic concepts behind this new a...

  17. Development of Advanced In-Cylinder Components and Tribological Systems for Low Heat Rejection Diesel Engines

    Science.gov (United States)

    Yonushonis, T. M.; Wiczynski, P. D.; Myers, M. R.; Anderson, D. D.; McDonald, A. C.; Weber, H. G.; Richardson, D. E.; Stafford, R. J.; Naylor, M. G.

    1999-01-01

    In-cylinder components and tribological system concepts were designed, fabricated and tested at conditions anticipated for a 55% thermal efficiency heavy duty diesel engine for the year 2000 and beyond. A Cummins L10 single cylinder research engine was used to evaluate a spherical joint piston and connecting rod with 19.3 MPa (2800 psi) peak cylinder pressure capability, a thermal fatigue resistant insulated cylinder head, radial combustion seal cylinder liners, a highly compliant steel top compression ring, a variable geometry turbocharger, and a microwave heated particulate trap. Components successfully demonstrated in the final test included spherical joint connecting rod with a fiber reinforced piston, high conformability steel top rings with wear resistant coatings, ceramic exhaust ports with strategic oil cooling and radial combustion seal cylinder liner with cooling jacket transfer fins. A Cummins 6B diesel was used to develop the analytical methods, materials, manufacturing technology and engine components for lighter weight diesel engines without sacrificing performance or durability. A 6B diesel engine was built and tested to calibrate analytical models for the aluminum cylinder head and aluminum block.

  18. Diamondback Moth, Plutella xylostella (L. in Southern Africa: Research Trends, Challenges and Insights on Sustainable Management Options

    Directory of Open Access Journals (Sweden)

    Honest Machekano

    2017-02-01

    Full Text Available The diamondback moth (DBM, Plutella xylostella, is a global economic pest of brassicas whose pest status has been exacerbated by climate change and variability. Southern African small-scale farmers are battling to cope with increasing pressure from the pest due to limited exposure to sustainable control options. The current paper critically analysed literature with a climate change and sustainability lens. The results show that research in Southern Africa (SA remains largely constrained despite the region’s long acquaintance with the insect pest. Dependency on broad-spectrum insecticides, the absence of insecticide resistance management strategies, climate change, little research attention, poor regional research collaboration and coordination, and lack of clear policy support frameworks, are the core limitations to effective DBM management. Advances in Integrated Pest Management (IPM technologies and climate-smart agriculture (CSA techniques for sustainable pest management have not benefitted small-scale horticultural farmers despite the farmers’ high vulnerability to crop losses due to pest attack. IPM adoption was mainly limited by lack of locally-developed packages, lack of stakeholders’ concept appreciation, limited alternatives to chemical control, knowledge paucity on biocontrol, climate mismatch between biocontrol agents’ origin and release sites, and poor research expertise and funding. We discuss these challenges in light of climate change and variability impacts on small-scale farmers in SA and recommend climate-smart, holistic, and sustainable homegrown IPM options propelled through IPM-Farmer Field School approaches for widespread and sustainable adoption.

  19. Development of the interactive model between Component Cooling Water System and Containment Cooling System using GOTHIC

    International Nuclear Information System (INIS)

    Byun, Choong Sup; Song, Dong Soo; Jun, Hwang Yong

    2006-01-01

    In a design point of view, component cooling water (CCW) system is not full-interactively designed with its heat loads. Heat loads are calculated from the CCW design flow and temperature condition which is determined with conservatism. Then the CCW heat exchanger is sized by using total maximized heat loads from above calculation. This approach does not give the optimized performance results and the exact trends of CCW system and the loads during transient. Therefore a combined model for performance analysis of containment and the component cooling water(CCW) system is developed by using GOTHIC software code. The model is verified by using the design parameters of component cooling water heat exchanger and the heat loads during the recirculation mode of loss of coolant accident scenario. This model may be used for calculating the realistic containment response and CCW performance, and increasing the ultimate heat sink temperature limits

  20. A Combined Approach for Component-based Software Design

    NARCIS (Netherlands)

    Guareis de farias, Cléver; van Sinderen, Marten J.; Ferreira Pires, Luis; Quartel, Dick; Baldoni, R.

    2001-01-01

    Component-based software development enables the construction of software artefacts by assembling binary units of production, distribution and deployment, the so-called software components. Several approaches addressing component-based development have been proposed recently. Most of these

  1. Component-Based Development of Runtime Observers in the COMDES Framework

    DEFF Research Database (Denmark)

    Guan, Wei; Li, Gang; Angelov, Christo K.

    2013-01-01

    against formally specified properties. This paper presents a component-based design method for runtime observers in the context of COMDES framework—a component-based framework for distributed embedded system and its supporting tools. Therefore, runtime verification is facilitated by model......Formal verification methods, such as exhaustive model checking, are often infeasible because of high computational complexity. Runtime observers (monitors) provide an alternative, light-weight verification method, which offers a non-exhaustive but still feasible approach to monitor system behavior...

  2. Development of novel tungsten processing technologies for electro-chemical machining (ECM) of plasma facing components

    International Nuclear Information System (INIS)

    Holstein, Nils; Krauss, Wolfgang; Konys, Juergen

    2011-01-01

    Plasma facing components for fusion applications must exhibit long-term stability under extreme conditions, and therefore material imperfections cannot be tolerated due to a high risk of technical failures. To prevent or abolish defects in refractory metals components during the manufacturing process, some methods of electro-chemical machining as S-ECM and C-ECM were developed, enabling both the processing of smooth plain defect-free surfaces of different geometry and the removal of bulk material for the shaping of three-dimensional structures, also without cracks. It is discussed, that tungsten ablation with accurate electro-chemical molding is very sensitive to the kind of electric current, and therefore current investigations focused also on the effects of frequency profiles on the sharpness of edge rounding.

  3. Principal Component Analysis of Working Memory Variables during Child and Adolescent Development.

    Science.gov (United States)

    Barriga-Paulino, Catarina I; Rodríguez-Martínez, Elena I; Rojas-Benjumea, María Ángeles; Gómez, Carlos M

    2016-10-03

    Correlation and Principal Component Analysis (PCA) of behavioral measures from two experimental tasks (Delayed Match-to-Sample and Oddball), and standard scores from a neuropsychological test battery (Working Memory Test Battery for Children) was performed on data from participants between 6-18 years old. The correlation analysis (p 1), the scores of the first extracted component were significantly correlated (p < .05) to most behavioral measures, suggesting some commonalities of the processes of age-related changes in the measured variables. The results suggest that this first component would be related to age but also to individual differences during the cognitive maturation process across childhood and adolescence stages. The fourth component would represent the speed-accuracy trade-off phenomenon as it presents loading components with different signs for reaction times and errors.

  4. Risk-ranking IST components into two categories

    International Nuclear Information System (INIS)

    Rowley, C.W.

    1996-01-01

    The ASME has utilized several schemes for identifying the appropriate scope of components for inservice testing (IST). The initial scope was ASME Code Class 1/2/3, with all components treated equally. Later the ASME Operations and Maintenance (O ampersand M) Committee decided to use safe shutdown and accident mitigation as the scoping criteria, but continued to treat all components equal inside that scope. Recently the ASME O ampersand M Committee decided to recognize service condition of the component, hence the comprehensive pump test. Although probabilistic risk assessments (PRAs) are incredibly complex plant models and computer hardware and software intensive, they are a tool that can be utilized by many plant engineering organizations to analyze plant system and component applications. In 1992 the ASME O ampersand M Committee got interested in using the PRA as a tool to categorize its pumps and valves. In 1994 the ASME O ampersand M Committee commissioned the ASME Center for Research and Technology Development (CRTD) to develop a process that adapted the PRA technology to IST. In late 1995 that process was presented to the ASME O ampersand M Committee. The process had three distinct portions: (1) risk-rank the IST components; (2) develop a more effective testing strategy for More Safety Significant Components; and (3) develop a more economic testing strategy for Less Safety Significant Components

  5. Risk-ranking IST components into two categories

    Energy Technology Data Exchange (ETDEWEB)

    Rowley, C.W.

    1996-12-01

    The ASME has utilized several schemes for identifying the appropriate scope of components for inservice testing (IST). The initial scope was ASME Code Class 1/2/3, with all components treated equally. Later the ASME Operations and Maintenance (O&M) Committee decided to use safe shutdown and accident mitigation as the scoping criteria, but continued to treat all components equal inside that scope. Recently the ASME O&M Committee decided to recognize service condition of the component, hence the comprehensive pump test. Although probabilistic risk assessments (PRAs) are incredibly complex plant models and computer hardware and software intensive, they are a tool that can be utilized by many plant engineering organizations to analyze plant system and component applications. In 1992 the ASME O&M Committee got interested in using the PRA as a tool to categorize its pumps and valves. In 1994 the ASME O&M Committee commissioned the ASME Center for Research and Technology Development (CRTD) to develop a process that adapted the PRA technology to IST. In late 1995 that process was presented to the ASME O&M Committee. The process had three distinct portions: (1) risk-rank the IST components; (2) develop a more effective testing strategy for More Safety Significant Components; and (3) develop a more economic testing strategy for Less Safety Significant Components.

  6. Integrated Pest Management for Sustainable Intensification of Agriculture in Asia and Africa

    Directory of Open Access Journals (Sweden)

    Jules Pretty

    2015-03-01

    Full Text Available Integrated Pest Management (IPM is a leading complement and alternative to synthetic pesticides and a form of sustainable intensification with particular importance for tropical smallholders. Global pesticide use has grown over the past 20 years to 3.5 billion kg/year, amounting to a global market worth $45 billion. The external costs of pesticides are $4–$19 (€3–15 per kg of active ingredient applied, suggesting that IPM approaches that result in lower pesticide use will benefit, not only farmers, but also wider environments and human health. Evidence for IPM’s impacts on pesticide use and yields remains patchy. We contribute an evaluation using data from 85 IPM projects from 24 countries of Asia and Africa implemented over the past twenty years. Analysing outcomes on productivity and reliance on pesticides, we find a mean yield increase across projects and crops of 40.9% (SD 72.3, combined with a decline in pesticide use to 30.7% (SD 34.9 compared with baseline. A total of 35 of 115 (30% crop combinations resulted in a transition to zero pesticide use. We assess successes in four types of IPM projects, and find that at least 50% of pesticide use is not needed in most agroecosystems. Nonetheless, policy support for IPM is relatively rare, counter-interventions from pesticide industry common, and the IPM challenge never done as pests, diseases and weeds evolve and move.

  7. Development of guidelines for inelastic analysis in design of fast reactor components

    International Nuclear Information System (INIS)

    Nakamura, Kyotada; Kasahara, Naoto; Morishita, Masaki; Shibamoto, Hiroshi; Inoue, Kazuhiko; Nakayama, Yasunari

    2008-01-01

    The interim guidelines for the application of inelastic analysis to design of fast reactor components were developed. These guidelines are referred from 'Elevated Temperature Structural Design Guide for Commercialized Fast Reactor (FDS)'. The basic policies of the guidelines are more rational predictions compared with elastic analysis approach and a guarantee of conservative results for design conditions. The guidelines recommend two kinds of constitutive equations to estimate strains conservatively. They also provide the methods for modeling load histories and estimating fatigue and creep damage based on the results of inelastic analysis. The guidelines were applied to typical design examples and their results were summarized as exemplars to support users

  8. Recent developments in turbomachinery component materials and manufacturing challenges for aero engine applications

    Science.gov (United States)

    Srinivas, G.; Raghunandana, K.; Satish Shenoy, B.

    2018-02-01

    In the recent years the development of turbomachinery materials performance enhancement plays a vital role especially in aircraft air breathing engines like turbojet engine, turboprop engine, turboshaft engine and turbofan engines. Especially the transonic flow engines required highly sophisticated materials where it can sustain the entire thrust which can create by the engine. The main objective of this paper is to give an overview of the present cost-effective and technological capabilities process for turbomachinery component materials. Especially the main focus is given to study the Electro physical, Photonic additive removal process and Electro chemical process for turbomachinery parts manufacture. The aeronautical propulsion based technologies are reviewed thoroughly where in surface reliability, geometrical precession, and material removal and highly strengthened composite material deposition rates usually difficult to cut dedicated steels, Titanium and Nickel based alloys. In this paper the past aeronautical and propulsion mechanical based manufacturing technologies, current sophisticated technologies and also future challenging material processing techniques are covered. The paper also focuses on the brief description of turbomachinery components of shaping process and coating in aeromechanical applications.

  9. Challenges of Integrated Pest Management in Sub-Saharan Africa

    NARCIS (Netherlands)

    Huis, van A.

    2009-01-01

    a response to the negative side effects of chemical control in the developed world, Integrated Pest Management (IPM) developed with an emphasis on reducing the role of pesticides. Later the role of natural enemies was recognized as being the cornerstone for sustainable pest management strategies.

  10. Heat source component development program. Report for July--December 1978

    International Nuclear Information System (INIS)

    Foster, E.L. Jr.

    1979-01-01

    This is the seventh of a series of reports describing the results of several analytical and experimental programs being conducted at Battelle-Columbus Laboratories to develop components for advanced radioisotope heat source applications. The heat sources will for the most part be used in advanced static and dynamic power conversion systems. Battelle's support of LASL during the current reporting period has been to determine the operational and reentry response of selected heat source trial designs, and their thermal response to a space shuttle solid propellant fire environment. Thermal, ablation, and thermal stress analyses were conducted using two-dimensional modeling techniques previously employed for the analysis of the earlier trial design versions, and modified in part to improve the modeling accuracy. Further modifications were made to improve the modeling accuracy as described herein. Thermal, ablation, and thermal stress analyses were then conducted for the trial design selected by LASL/DOE for more detailed studies using three-dimensional modeling techniques

  11. Development of large components for the fusion reactor vacuum circuits

    International Nuclear Information System (INIS)

    Perinic, D.; Lorrain, C.

    1986-06-01

    The Commission of the European Communities appointed in mid-1983 the Centre d'Etudes Nucleaires de Saclay and the Kernforschungszentrum Karlsruhe GmbH to investigate whether large vacuum components for use in the fusion machine can be built. The following individual targets have been defined for studies under this project: - Elaboration of technical specifications for large components. - Investigation of the feasibility. - Specification of the tests required and planning of a testing facility. The plasma chamber pumping system is essentially concerned

  12. Composing simulations using persistent software components

    Energy Technology Data Exchange (ETDEWEB)

    Holland, J.V.; Michelsen, R.E.; Powell, D.R.; Upton, S.C.; Thompson, D.R.

    1999-03-01

    The traditional process for developing large-scale simulations is cumbersome, time consuming, costly, and in some cases, inadequate. The topics of software components and component-based software engineering are being explored by software professionals in academic and industrial settings. A component is a well-delineated, relatively independent, and replaceable part of a software system that performs a specific function. Many researchers have addressed the potential to derive a component-based approach to simulations in general, and a few have focused on military simulations in particular. In a component-based approach, functional or logical blocks of the simulation entities are represented as coherent collections of components satisfying explicitly defined interface requirements. A simulation is a top-level aggregate comprised of a collection of components that interact with each other in the context of a simulated environment. A component may represent a simulation artifact, an agent, or any entity that can generated events affecting itself, other simulated entities, or the state of the system. The component-based approach promotes code reuse, contributes to reducing time spent validating or verifying models, and promises to reduce the cost of development while still delivering tailored simulations specific to analysis questions. The Integrated Virtual Environment for Simulation (IVES) is a composition-centered framework to achieve this potential. IVES is a Java implementation of simulation composition concepts developed at Los Alamos National Laboratory for use in several application domains. In this paper, its use in the military domain is demonstrated via the simulation of dismounted infantry in an urban environment.

  13. Application of fuzzy-MOORA method: Ranking of components for reliability estimation of component-based software systems

    Directory of Open Access Journals (Sweden)

    Zeeshan Ali Siddiqui

    2016-01-01

    Full Text Available Component-based software system (CBSS development technique is an emerging discipline that promises to take software development into a new era. As hardware systems are presently being constructed from kits of parts, software systems may also be assembled from components. It is more reliable to reuse software than to create. It is the glue code and individual components reliability that contribute to the reliability of the overall system. Every component contributes to overall system reliability according to the number of times it is being used, some components are of critical usage, known as usage frequency of component. The usage frequency decides the weight of each component. According to their weights, each component contributes to the overall reliability of the system. Therefore, ranking of components may be obtained by analyzing their reliability impacts on overall application. In this paper, we propose the application of fuzzy multi-objective optimization on the basis of ratio analysis, Fuzzy-MOORA. The method helps us find the best suitable alternative, software component, from a set of available feasible alternatives named software components. It is an accurate and easy to understand tool for solving multi-criteria decision making problems that have imprecise and vague evaluation data. By the use of ratio analysis, the proposed method determines the most suitable alternative among all possible alternatives, and dimensionless measurement will realize the job of ranking of components for estimating CBSS reliability in a non-subjective way. Finally, three case studies are shown to illustrate the use of the proposed technique.

  14. [Combined effect of sulbactam/cefoperazone and other antibiotics against clinical isolates of multi-resistant strains. II. In vitro combined effects of sulbactam/cefoperazone with imipenem/cilastatin, cefuzonam, flomoxef, amikacin or tobramycin].

    Science.gov (United States)

    Kouda, M; Kumagai, I; Kobayashi, J; Sugai, R; Matsuzaki, H

    1991-02-01

    We evaluated combined effects of sulbactam/cefoperazone (SBT/CPZ) with each of imipenem/cilastatin (IPM), cefuzonam, flomoxef, amikacin (AMK) and tobramycin (TOB) against 324 clinical strains. Through this study, we obtained the following results. 1. Against Serratia marcescens and Enterobacter cloacae, good synergism was obtained by combining SBT/CPZ with IPM, AMK, or TOB. 2. Against Pseudomonas aeruginosa, good synergism was obtained by combining SBT/CPZ with AMK or TOB. 3. When SBT/CPZ was used in combination with IPM, antagonism was observed among about 45% of strains of P. aeruginosa.

  15. Systematic Assessment of the Impact of User Roles on Network Flow Patterns

    Science.gov (United States)

    2017-09-01

    a system at IP address c_IPj can be expressed as D[ui][c_ip j]. Specifying use of a specific protocol ( prk ), server port (spl) and distant end IP...address (e_ipm) can be expressed as D[ui][c_ip j][ prk ][spl][e_ipm]. 3.2 Patterns Within Flow Sets We define patterns within a set of Netflow records as...address, protocol, server port, and endpoint IP address (D[ui][c_ip j][ prk ][spl][e_ipm]) we identified sequential flow pairs, matching each flow with

  16. Development of a Real-Time GPS/Seismic Displacement Meter: Seismic Component and Communications

    Science.gov (United States)

    Vernon, F.; Bock, Y.

    2002-12-01

    In two abstracts, we report on an ongoing effort to develop an Integrated Real-Time GPS/Seismic System for Orange and Western Riverside Counties, California, spanning three major strike-slip faults in southern California (San Andreas, San Jacinto, and Elsinore) and significant populations and civilian infrastructure. The system relying on existing GPS and seismic networks will collect and analyze GPS and seismic data for the purpose of estimating and disseminating real-time positions and total ground displacements (dynamic, as well as static) covering all phases of the seismic cycle, from fractions of seconds to years. Besides its intrinsic scientific use as a real-time displacement meter (transducer), the GPS/Seismic System will be a powerful tool for local and state decision makers for risk mitigation, disaster management, and structural monitoring (dams, bridges, and buildings). Furthermore, the GPS/Seismic System will become an integral part of California's spatial referencing and positioning infrastructure, which is complicated by tectonic motion, seismic displacements, and land subsidence. This development is taking place under the umbrella of the California Spatial Reference Center, in partnership with local (The Counties, Riverside County Flood and Water Conservation District, Southern California Metropolitan Water District), state (Caltrans), and Federal agencies (NGS, NASA, USGS), the geophysics community (SCEC2/SCIGN), and the private sector (RBF Consulting). The project is leveraging considerable funding, resources, and research and development from SCIGN, CSRC and two NSF-funded IT projects at UCSD and SDSU: RoadNet (Real-Time Observatories, Applications and Data Management Network) and the High Performance Wireless Research and Education Network (HPWREN). These two projects are funded to develop both the wireless networks and the integrated, seamless, and transparent information management system that will deliver seismic, geodetic, oceanographic

  17. Sustainability assessment of crop protection systems: SustainOS methodology and its application for apple orchards

    NARCIS (Netherlands)

    Mouron, P.; Heijne, B.; Naef, A.; Strassemever, J.; Haver, F.; Avilla, J.

    2012-01-01

    Crop protection in general and apple crop protection in particular often rely on pesticides, although several alternative pest management measures are available. In this context European agricultural policy requires the implementation of Integrated Pest Management (IPM) by 2014. Within IPM, more

  18. Decision criteria for software component sourcing: steps towards a framework

    NARCIS (Netherlands)

    Kusters, R.J.; Pouwelse, L.; Martin, H.; Trienekens, J.J.M.; Hammoudi, Sl.; Maciaszek, L.; Missikoff, M.M.; Camp, O.; Cordeiro, J.

    2016-01-01

    Software developing organizations nowadays have a wide choice when it comes to sourcing software components. This choice ranges from developing or adapting in-house developed components via buying closed source components to utilizing open source components. This study seeks to determine criteria

  19. E-Learning as an Important Component in “Blended Learning” in School Development Projects in Norway

    OpenAIRE

    Aasen, Ann Margareth

    2013-01-01

    E-learning is an important component in ཿblended learning࿝ in all of SePU`s projects and is used for additional education and development of competences. Blended learning is defined as learning facilitated by the effective combination of different modes of delivery, models of teaching, styles of learning, and based on transparent communication among all parties involved in development competences. In general, one of the challenges with improving the workplace is linked to employee training an...

  20. Comparison of a direct-reading device to gravimetric methods for evaluating organic dust aerosols in an enclosed swine production environment.

    Science.gov (United States)

    Taylor, C D; Reynolds, S J

    2001-01-01

    The production of livestock in enclosed facilities has become an accepted practice, driven by the need for increased efficiency. Exposure to organic dusts, containing various bioactive components, has been identified an important risk factor for the high rate of lung disease found among workers in these environments. Assessment of organic dust exposure requires technical skills and instrumentation not readily available to most agricultural enterprises. Development of a simple, cost-effective method for measuring organic dust levels would be useful in evaluating and controlling exposures in these environments. The objective of this study was to evaluate the usefulness of the direct reading MIE PDM-3 Miniram for estimating organic dust concentrations in enclosed swine production facilities. Responses from the MIE PDM-3 Miniram were compared to gravimetric methods for total and inhalable dust. Total dust determinations were conducted in accordance with the National Institute for Occupational Safety and Health (NIOSH) method 0500. Inhalable particulate mass (IPM) sampling was conducted using SKC brand IOM (Institute of Occupational Medicine) sampling cassettes, which meet the American Conference of Governmental Industrial Hygienists ACGIH criteria for inhalable dust sampling. This study design also allowed for the comparison of traditional total dust method to the IPM method, in collecting organic dusts in an agricultural setting. Fifteen sets of side-by-side samples (Miniram, total dust, and IPM) were collected over a period of six months in a swine confinement building. There were statistically significant differences in the results provided by the three sampling methods. Measurements for inhalable dust exceeded those for total dust in eleven of fifteen samples. The Miniram time-weighted average (TWA) response to the organic dust was always the lower of the three methods. A high degree of correlation was found among all three methods. The Miniram performed well under

  1. Ovarian germ cell tumors with rhabdomyosarcomatous components and later development of growing teratoma syndrome: a case report

    Directory of Open Access Journals (Sweden)

    Al-Jumaily Usama

    2012-01-01

    Full Text Available Abstract Introduction Development of a sarcomatous component in a germ cell tumor is an uncommon phenomenon. Most cases reported have a grim prognosis. Growing teratoma syndrome is also an uncommon phenomenon and occurs in approximately 2% to 7% of non seminomatous germ cell tumors and should be treated surgically. Case presentation We report the case of a 12-year-old Asian girl with an ovarian mixed germ cell tumor containing a rhabdomyosarcomatous component. She was treated with a germ cell tumor chemotherapy regimen and rhabdomyosarcoma-specific chemotherapy. Towards the end of her treatment, she developed a retroperitoneal mass that was increasing in size. It was completely resected, revealing a mature teratoma, consistent with growing teratoma syndrome. She is still in complete remission approximately three years after presentation. Conclusion The presence of rhabdomyosarcoma in a germ cell tumor should be treated by a combined chemotherapy regimen (for germ cell tumor and rhabdomyosarcoma. In addition, development of a mass during or after therapy with normal serum markers should raise the possibility of growing teratoma syndrome that should be treated surgically.

  2. Heavy steel casting components for power plants 'mega-components' made of high Cr-steels

    Energy Technology Data Exchange (ETDEWEB)

    Hanus, Reinhold [voestalpine Giesserei Linz GmbH, Linz (Austria)

    2010-07-01

    Steel castings of creep resistant steels play a key role in fossil fuel fired power plants for highly loaded components in the high and intermediate pressure section of the turbines. Inner and outer casings, valve casings, inlet connections and elbows are examples of such critical components. The most important characteristic in a power plant is the efficiency, which mainly drives the CO2-emission. As a consequence of steadily improving power plant efficiencies and ever stricter emission standards, steam parameters become more critical and the creep resistance of the cast materials must also be constantly improved. The foundries voestalpine Giesserei Linz and voestalpine Giesserei Traisen participated in the development of the new 9-10% Cr-steels for application up to 625 C/650 C and in the THERMIE project where Ni-base alloys for 700 C-power plants were developed. Beside the material development in the European research projects the commercial production had to be established for industrial processes and the newly developed materials have to be transferred from research into the commercial production of heavy cast components. After selecting the most promising alloy from the laboratory melts, welding tests were performed - mostly with matching electrodes also produced within COST/THERMIE. Base material and welds were investigated in respect of microstructure, creep resistance, mechanical properties and weldability. Heat treatment investigations were also necessary for optimization of the mechanical properties. Based on the results of these studies, pilot components and plates for testing welding processes were cast in order to verify the castability and weldability of larger parts and to make any necessary adjustments to chemical composition, heat treatment or welding parameters. Parallel to the ongoing creep tests within COST/THERMIE-program, the newly developed steel grades were introduced into the commercial production of large components. This involved finding

  3. Development of a simple method for classifying the degree of importance of components in nuclear power plants using probabilistic analysis technique

    International Nuclear Information System (INIS)

    Shimada, Yoshio; Miyazaki, Takamasa

    2006-01-01

    In order to analyze large amounts of trouble information of overseas nuclear power plants, it is necessary to select information that is significant in terms of both safety and reliability. In this research, a method of efficiently and simply classifying degrees of importance of components in terms of safety and reliability while paying attention to root-cause components appearing in the information was developed. Regarding safety, the reactor core damage frequency (CDF), which is used in the probabilistic analysis of a reactor, was used. Regarding reliability, the automatic plant trip probability (APTP), which is used in the probabilistic analysis of automatic reactor trips, was used. These two aspects were reflected in the development of criteria for classifying degrees of importance of components. By applying these criteria, a method of quantitatively and simply judging the significance of trouble information of overseas nuclear power plants was developed. (author)

  4. Integrated pest management (IPM) and good agricultural practices ...

    African Journals Online (AJOL)

    Agricultural development is caught between increased competition accompanied by decreasing prices, land degradation and concerns for sustainability, environment, safe food and animal / human health. Pesticides have been around in some form or another for centuries and have posed a lot of harm to our crops, ...

  5. Modeling of Control Costs, Emissions, and Control Retrofits for Cost Effectiveness and Feasibility Analyses

    Science.gov (United States)

    Learn about EPA’s use of the Integrated Planning Model (IPM) to develop estimates of SO2 and NOx emission control costs, projections of futureemissions, and projections of capacity of future control retrofits, assuming controls on EGUs.

  6. Development of reliability database for safety-related I and C component based on operating experience of KSNP

    International Nuclear Information System (INIS)

    Jang, S. C.; Han, S. H.; Min, K. R.

    2001-01-01

    Reliability database for safety-related I and C components has been developed, based on domestic operating experience of total 8.63 years from four units-Yonggwang Units 3 and 4, and Ulchin Units 3 and 4. This plant-specific data of safety-related I and C components has compared with operating experience for CE-supplied plants in U.S.A. As a results, we found that on the whole the domestic reliability data was similar to CE-supplied plants in USA, through lots of failures occurred early in the commercial operation were included in our analyses without percolation

  7. The Incidence Patterns Model to Estimate the Distribution of New HIV Infections in Sub-Saharan Africa: Development and Validation of a Mathematical Model.

    Directory of Open Access Journals (Sweden)

    Annick Bórquez

    2016-09-01

    Full Text Available Programmatic planning in HIV requires estimates of the distribution of new HIV infections according to identifiable characteristics of individuals. In sub-Saharan Africa, robust routine data sources and historical epidemiological observations are available to inform and validate such estimates.We developed a predictive model, the Incidence Patterns Model (IPM, representing populations according to factors that have been demonstrated to be strongly associated with HIV acquisition risk: gender, marital/sexual activity status, geographic location, "key populations" based on risk behaviours (sex work, injecting drug use, and male-to-male sex, HIV and ART status within married or cohabiting unions, and circumcision status. The IPM estimates the distribution of new infections acquired by group based on these factors within a Bayesian framework accounting for regional prior information on demographic and epidemiological characteristics from trials or observational studies. We validated and trained the model against direct observations of HIV incidence by group in seven rounds of cohort data from four studies ("sites" conducted in Manicaland, Zimbabwe; Rakai, Uganda; Karonga, Malawi; and Kisesa, Tanzania. The IPM performed well, with the projections' credible intervals for the proportion of new infections per group overlapping the data's confidence intervals for all groups in all rounds of data. In terms of geographical distribution, the projections' credible intervals overlapped the confidence intervals for four out of seven rounds, which were used as proxies for administrative divisions in a country. We assessed model performance after internal training (within one site and external training (between sites by comparing mean posterior log-likelihoods and used the best model to estimate the distribution of HIV incidence in six countries (Gabon, Kenya, Malawi, Rwanda, Swaziland, and Zambia in the region. We subsequently inferred the potential

  8. The Incidence Patterns Model to Estimate the Distribution of New HIV Infections in Sub-Saharan Africa: Development and Validation of a Mathematical Model.

    Science.gov (United States)

    Bórquez, Annick; Cori, Anne; Pufall, Erica L; Kasule, Jingo; Slaymaker, Emma; Price, Alison; Elmes, Jocelyn; Zaba, Basia; Crampin, Amelia C; Kagaayi, Joseph; Lutalo, Tom; Urassa, Mark; Gregson, Simon; Hallett, Timothy B

    2016-09-01

    Programmatic planning in HIV requires estimates of the distribution of new HIV infections according to identifiable characteristics of individuals. In sub-Saharan Africa, robust routine data sources and historical epidemiological observations are available to inform and validate such estimates. We developed a predictive model, the Incidence Patterns Model (IPM), representing populations according to factors that have been demonstrated to be strongly associated with HIV acquisition risk: gender, marital/sexual activity status, geographic location, "key populations" based on risk behaviours (sex work, injecting drug use, and male-to-male sex), HIV and ART status within married or cohabiting unions, and circumcision status. The IPM estimates the distribution of new infections acquired by group based on these factors within a Bayesian framework accounting for regional prior information on demographic and epidemiological characteristics from trials or observational studies. We validated and trained the model against direct observations of HIV incidence by group in seven rounds of cohort data from four studies ("sites") conducted in Manicaland, Zimbabwe; Rakai, Uganda; Karonga, Malawi; and Kisesa, Tanzania. The IPM performed well, with the projections' credible intervals for the proportion of new infections per group overlapping the data's confidence intervals for all groups in all rounds of data. In terms of geographical distribution, the projections' credible intervals overlapped the confidence intervals for four out of seven rounds, which were used as proxies for administrative divisions in a country. We assessed model performance after internal training (within one site) and external training (between sites) by comparing mean posterior log-likelihoods and used the best model to estimate the distribution of HIV incidence in six countries (Gabon, Kenya, Malawi, Rwanda, Swaziland, and Zambia) in the region. We subsequently inferred the potential contribution of each

  9. Phenotypic detection of metallo-β-lactamase among the clinical isolates of imipenem resistant Pseudomonas and Acinetobacter in tertiary care hospitals of Dhaka city

    Directory of Open Access Journals (Sweden)

    Shaheda Anwar

    2010-07-01

    Full Text Available The rapid spread of Metallo-b-lactamase (MBL producing Gram negative bacilli represents a matter of great concern worldwide. The study analyzed the occurrence of MBL production in carbapenem resistant Pseudomonas and Acinetobacter isolates over one year period. A total of 132 Pseudomonas and 76 Acinetobacter isolates were obtained from two tertiary care hospitals of Dhaka city. A total of 53 Pseudomonas and 29 Acinetobacter isolates were selected because of their resistance to carbapenem specially imipenem (IPM. Screening for MBL production was performed in these isolates by IPM-EDTA microdilution MIC method. 44 (83% IPM resistant Pseudomonas and 19 (65.5% Acinetobacter isolates were MBL producer by IPM-EDTA microdilution MIC method. These results suggest that MBL producing Pseudomonas and Acinetobacter isolates are emerging in our country and it is essential to screen carbapenem resistant isolates for MBL production. Ibrahim Med. Coll. J. 2010; 4(2: 63-65

  10. Integrating environmental component models. Development of a software framework

    NARCIS (Netherlands)

    Schmitz, O.

    2014-01-01

    Integrated models consist of interacting component models that represent various natural and social systems. They are important tools to improve our understanding of environmental systems, to evaluate cause–effect relationships of human–natural interactions, and to forecast the behaviour of

  11. Development of underwater laser cladding and underwater laser seal welding techniques for reactor components

    International Nuclear Information System (INIS)

    Hino, Takehisa; Tamura, Masataka; Tanaka, Yoshimi; Kouno, Wataru; Makino, Yoshinobu; Kawano, Shohei; Matsunaga, Keiji

    2009-01-01

    Stress corrosion cracking (SCC) has been reported at the aged components in many nuclear power plants. Toshiba has been developing the underwater laser welding. This welding technique can be conducted without draining the water in the reactor vessel. It is beneficial for workers not to exposure the radiation. The welding speed can be attaining twice as fast as that of Gas Tungsten Arc Welding (GTAW). The susceptibility of SCC can also be lower than the Alloy 600 base metal. (author)

  12. Evaluation of light attraction for the stored-product psocid, Liposcelis bostrychophila

    Science.gov (United States)

    The psocid, Liposcelis bostrychophila Badonnel (Psocoptera: Liposcelididae), is the most widespread psocid pest of stored-products. Because L. bostrychophila has developed resistance to several chemical insecticides it is important to investigate other integrated pest management (IPM) approaches, an...

  13. Socio-Economic Condition and the Risk of Zika: Risk Mapping in Brownsville, TX

    Science.gov (United States)

    EPA has a Congressional mandate to support and promote the use of IPM. Both Federal Insecticide Fungicide and Rodenticide Act (FIFRA) and the Food Quality Protection Act (FQPA) contain language directing EPA to cooperate with various partners to further the use of IPM. Congress m...

  14. 77 FR 20005 - Solicitation of Input From Stakeholders Regarding the Proposed Crop Protection Competitive Grants...

    Science.gov (United States)

    2012-04-03

    ... Support System, IPM and Biological Control, Minor Crop Pest Management/IR-4, Pest Management Alternatives...: The President's budget proposal for FY 2013 consolidates six funding lines addressing pest management and integrated pest management (IPM) issues into a single budgetary line, called the Crop Protection...

  15. New approach to Integrated Pest Management research with and for horticulture. A vision from and beyond economics

    NARCIS (Netherlands)

    Buurma, J.S.; Velden, van der N.J.A.

    2017-01-01

    The main problem addressed in this paper is the low adoption rate of Integrated Pest Management (IPM) knowledge into practice. Many IPM research leaders believe this low adoption rate is due to bottlenecks in knowledge supply. Consequently, they have asked for research, education and extension

  16. Networking of integrated pest management: A powerful approach to address common challenges in agriculture

    DEFF Research Database (Denmark)

    Lamichhane, Jay Ram; Aubertot, J-N; Begg, Graham

    2016-01-01

    in agriculture. A large number of stakeholders (researchers, policy makers, growers and industries) are involved in the sector of crop protection, which needs to be coordinated through effective communications and dynamic collaboration to make any IPM strategy successful. Here we discuss a decade-long IPM...

  17. A prototype ionization profile monitor for RHIC

    Energy Technology Data Exchange (ETDEWEB)

    Connolly, R.; Cameron, P.; Ryan, W. [and others

    1997-07-01

    Transverse beam profiles in the Relativistic Heavy-Ion Collider (RHIC) will be measured with ionization profile monitors (IPM`s). Each IPM collects and measures the distribution of electrons in the beamline resulting from residual gas ionization during bunch passage. The electrons are swept transversely from the beamline and collected on strip anodes oriented parallel to the beam axis. At each bunch passage the charge pulses are amplified, integrated, and digitized for display as a profile histogram. A prototype detector was tested in the injection line during the RHIC Sextant Test. This paper describes the detector and gives results from the beam tests.

  18. The Increase of Arthropods Biodiversity in Paddy Field Ecosystem Managed by Using Integrated Pest Management at South Borneo

    Directory of Open Access Journals (Sweden)

    Samharinto

    2012-12-01

    Full Text Available We have studied the arthropods biodiversity in two paddy field ecosystems, namely, paddy field ecosystem using Integrated Pest Management (IPM system and non-IPM paddy field ecosystem. This study was conducted from April 2011 – November 2011 in three locations, that is, Pasar Kamis village and Sungai Rangas village in Banjar regency, and Guntung Payung village in Banjarbaru city, South Borneo Province. In this study, we used insect nets, yellow sticky traps, light trap and pitfall trap to get the sample or catch the arthropods in one period of planting season. The arthropods caught were then classified into some classes: pest (herbivore, natural enemy (parasitoid and predator, and other arthropods. After that, the Species Diversity Index was determined using its Shannon-Wiener Index (H’, Evenness (e, Species Richness (R, and Species Similarity Index (IS. The sum of arthropods which have the characteristic of pest and parasitoid were higher in the IPM paddy fields than in the non-IPM paddy fields, and the sum of other arthropods were the same. The highest H’ and e values were in the IPM paddy field in Pasar Kamis village. The IS value for each three locations were 77.5% in Pasar Kamis village, 93.42% in Guntung Payung village, and 78.76% in Sungai Rangas village.

  19. Ranking of risk significant components for the Davis-Besse Component Cooling Water System

    International Nuclear Information System (INIS)

    Seniuk, P.J.

    1994-01-01

    Utilities that run nuclear power plants are responsible for testing pumps and valves, as specified by the American Society of Mechanical Engineers (ASME) that are required for safe shutdown, mitigating the consequences of an accident, and maintaining the plant in a safe condition. These inservice components are tested according to ASME Codes, either the earlier requirements of the ASME Boiler and Pressure Vessel Code, Section XI, or the more recent requirements of the ASME Operation and Maintenance Code, Section IST. These codes dictate test techniques and frequencies regardless of the component failure rate or significance of failure consequences. A probabilistic risk assessment or probabilistic safety assessment may be used to evaluate the component importance for inservice test (IST) risk ranking, which is a combination of failure rate and failure consequences. Resources for component testing during the normal quarterly verification test or postmaintenance test are expensive. Normal quarterly testing may cause component unavailability. Outage testing may increase outage cost with no real benefit. This paper identifies the importance ranking of risk significant components in the Davis-Besse component cooling water system. Identifying the ranking of these risk significant IST components adds technical insight for developing the appropriate test technique and test frequency

  20. Use of methods of mathemitical theory of experiment in deVeloping many-component radioprotective preparations

    International Nuclear Information System (INIS)

    Vladimirov, V.G.; Zajtseva, T.G.; Kamenko, I.P.; Poddubskij, G.A.; Razorenov, G.S.; Smirnova, S.M.; Tarnopol'skaya, L.G.

    1983-01-01

    A study was made of the possibility of using a mathematical theory of experiment in developing effective many-component radioprotective preparations. The preparations composed of cystamine or S-(ω-aminopropyl)-β-aminoethyl thiophosphate, as the basis, and mexamine, ethyron and gutimine were used as an example to prove the adequacy of such an approach in solving the problems of optimization of composing the radioprotective complexes according to their efficiency and toxicity

  1. Replaceable LMFBR core components

    International Nuclear Information System (INIS)

    Evans, E.A.; Cunningham, G.W.

    1976-01-01

    Much progress has been made in understanding material and component performance in the high temperature, fast neutron environment of the LMFBR. Current data have provided strong assurance that the initial core component lifetime objectives of FFTF and CRBR can be met. At the same time, this knowledge translates directly into the need for improved core designs that utilize improved materials and advanced fuels required to meet objectives of low doubling times and extended core component lifetimes. An industrial base for the manufacture of quality core components has been developed in the US, and all procurements for the first two core equivalents for FFTF will be completed this year. However, the problem of fabricating recycled plutonium while dramatically reducing fabrication costs, minimizing personnel exposure, and protecting public health and safety must be addressed

  2. CoC Awards by Program Component

    Data.gov (United States)

    Department of Housing and Urban Development — CoC Awards by Program Component reports provide snapshots of award data broken down by eligible program component types for the year selected. The reports, which can...

  3. DETERMINAN STUNTING PADA ANAK USIA 2-3 TAHUN DI TINGKAT PROVINSI (DETERMINANTS OF STUNTING IN CHILDREN 2-3 YEARS OF AGE AT PROVINCE LEVEL

    Directory of Open Access Journals (Sweden)

    Sri Mulyati

    2013-07-01

    related to poverty. Aggregately, PubIic Health Development Index (IPKM is an indicator of Health Development Improvement and Human Development Index (IPM is one of 24 IPKM's indicators. Aim of Analysis: To study the determinants which differentiate the high of stunting prevalence in children 2-3 years of age in province level. Method: This analysis is a study of population data that are being analyzed is aggregate data from some variables (IPKM, KEK on pregnant mothers and household energy deficit from Health Basic Survey (Riskesdas 2007 data. Then IPM variable and poverty in 2007 from BPS’s data. On this analysis, stunting in children 2-3 years of age as variable is bonded, while others variables are free variables. Statistic test that used is correlation test and discriminant test. Result: Bivariately, there is no correlation between KEK in pregnant mothers and stunting in children 2-3 years of age, but there is correlation between stunting with IPKM. IPKM (r=-0.67; p=0.000, IPM (r=-0.52; p=0.002 and poverty (r=0.58; p=0.003. Discriminant result shows that IPKM is a differentiating factor between low- and high- stunting prevalence in children 2-3 years of age in province level. IPKM variance contribution on two different groups is 34 percent. Discriminant function that was resulted Z = -6.491 + 17.853 *IPKM, IPKM with prediction ability 78.8 percent. Conclusion: IPKM is a differentiate factor between high and low stunting prevalence in children 2-3 years of age in province level. [Penel Gizi Makan 2011, 34(1: 50-62]   Keywords: stunting, children 2-3 years of age, IPKM, IPM, poverty

  4. CRITERIA, PARAMETERS AND LEVELS OF DEVELOPING ACTIVITY COMPONENTS OF PRIMARY SCHOOL TEACHERS’ SOCIAL COMPETENCE IN THE SYSTEM OF POSTGRADUATE EDUCATION

    Directory of Open Access Journals (Sweden)

    Olena Varetska

    2016-11-01

    Full Text Available Only recently scientists have directed their search to development criterion-level system of diagnostic tool of competence of teachers, including social one. The complexity is connected with the lack of a clear pedagogic performance of evaluation system of training of primary school teachers in high education, the efficiency of their education in postgraduate course for the development of social competence and established methods (procedures of the development. Despite of the some issues elaborated on the content and structure of the measurement, diagnostic tools evaluation categorical apparatus only conventional scientific view on the question of definition of objective criteria, indicators and levels of social competence of the person are not made. The lack of a clear system of evaluation of the results of primary school teachers training in high education institutions, the effectiveness of social competence of primary school teachers in the system of postgraduate education, established methods lead to development of the appropriate criterion-level tools. According to the limits of the article it focuses on activity-component of social competence primary school teachers. To highlight the criteria, indicators, levels of development in the system of postgraduate education partial methodology is grounded, proprietary methods of research of its three components is proposed. Detailed description of criterion-level tools for evaluation of results of activity of a component of social competence elementary school teacher made the awareness of its semantic content and the relationship between the criteria, indicators and levels of regulation of the specific characteristics of the assessment system possible. The results will be useful in the characteristics of criterion-level instruments of other components of the designated competence and self-monitoring of primary school teachers and future teachers, awareness of the social significance of the

  5. Tweaking the Four-Component Model

    Science.gov (United States)

    Curzer, Howard J.

    2014-01-01

    By maintaining that moral functioning depends upon four components (sensitivity, judgment, motivation, and character), the Neo-Kohlbergian account of moral functioning allows for uneven moral development within individuals. However, I argue that the four-component model does not go far enough. I offer a more accurate account of moral functioning…

  6. Analysis of the Mediterranean fruit fly [Ceratitis capitata (Wiedemann)] spatio-temporal distribution in relation to sex and female mating status for precision IPM.

    Science.gov (United States)

    Sciarretta, Andrea; Tabilio, Maria Rosaria; Lampazzi, Elena; Ceccaroli, Claudio; Colacci, Marco; Trematerra, Pasquale

    2018-01-01

    female populations. Based on our results, a more precise IPM strategy, coupled with effective sanitation practices, could represent a more effective approach to medfly control.

  7. Manufacturing technology development of plasma/ion nitriding for improvement of hardness of machine components and tools

    International Nuclear Information System (INIS)

    Suprapto; Tjipto Sujitno; Saminto

    2015-01-01

    The manufacturing technology development of plasma/ion nitriding to improve of hardness of machine components and tools has been done. The development of this technology aims to improve device performance plasma nitriding double chamber and conducted with the addition of thermal radiation shield. Testing was done by testing for preheating operation (start-up), test operation for conditions nitriding and test for nitriding process. The results show that: the plasma nitriding device can be operated for nitriding process at the temperature of about 500 °C for 6 hours, using the thermal radiation shield obtained outside wall temperature of about 65 °C and shorten start-up time to about 60 minutes. The use of thermal radiation shield can also improve the efficiency of the electric power supply and increase the operating temperature for nitriding process. Test for nitriding obtained increase of hardness 1.33 times for the original camshaft (genuine parts) and 1.8 times for the imitation camshaft (imitation parts), the results are compared with after the tempering process at a temperature of 600 °C. For sample SS 304 was 2.45 times compared with before nitrided These results indicate that the development of manufacturing technology of plasma/ion nitriding to increase hardness of machine components and tools have been successfully able to increase the hardness, although still need to be optimized. Besides that, these devices can be developed to use for the process of carburizing and carbonitriding. (author)

  8. Economic evaluation of an area-wide integrated pest management program to control the Asian tiger mosquito in New Jersey

    Science.gov (United States)

    Aedes albopictus is the most invasive mosquito in the world, an important disease vector, and a biting nuisance that limits outdoor activities. Area-wide integrated pest management (AW-IPM) is the recommended control strategy. We conducted an economic evaluation of the AW-IPM project in Mercer and ...

  9. Fuel element load/unload machine for the PEC reactor

    International Nuclear Information System (INIS)

    Clayton, K.F.

    1984-01-01

    GEC Energy Systems Limited are providing two fuel element load/unload machines for use in the Italian fast reactor programme. One will be used in the mechanism test facility (IPM) at Casaccia, to check the salient features of the machine operating in a sodium environment prior to the second machine being installed in the PEC Brasimone Reactor. The machine is used to handle fuel elements, control rods and other reactor components in the sodium-immersed core of the reactor. (U.K.)

  10. Nutritional components regulate the gut immune system and its association with intestinal immune disease development.

    Science.gov (United States)

    Lamichhane, Aayam; Kiyono, Hiroshi; Kunisawa, Jun

    2013-12-01

    The gut is equipped with a unique immune system for maintaining immunological homeostasis, and its functional immune disruption can result in the development of immune diseases such as food allergy and intestinal inflammation. Accumulating evidence has demonstrated that nutritional components play an important role in the regulation of gut immune responses and also in the development of intestinal immune diseases. In this review, we focus on the immunological functions of lipids, vitamins, and nucleotides in the regulation of the intestinal immune system and as potential targets for the control of intestinal immune diseases. © 2013 Journal of Gastroenterology and Hepatology Foundation and Wiley Publishing Asia Pty Ltd.

  11. Development and application of W/Cu flat-type plasma facing components at ASIPP

    Science.gov (United States)

    Li, Q.; Zhao, S. X.; Sun, Z. X.; Xu, Y.; Li, B.; Wei, R.; Wang, W. J.; Qin, S. G.; Shi, Y. L.; Xie, C. Y.; Wang, J. C.; Wang, X. L.; Missirlian, M.; Guilhem, D.; Liu, G. H.; Yang, Z. S.; Luo, G.-N.

    2017-12-01

    W/Cu flat-type plasma facing components (PFCs) were widely used in divertor of fusion device because of its advantages, such as low cost, light in weight and good machinability. However, it is very difficult to manufacture them due to the large mismatch between the thermo-mechanical properties of W and Cu. Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP) has successfully developed W/Cu flat-type PFCs for EAST W/Cu divertor project by hot isostatic pressing (HIP) technology. This paper presents the development and application of W/Cu flat-type PFCs at ASIPP. The optimized manufacturing process is to cast pure copper onto the rear side of W tiles at temperature of 1200 °C firstly, and then to HIP the W/Cu tiles onto CuCrZr heat sink at temperature of 600 °C, pressure of 150 MPa and duration of 3 h. W/Cu flat-type testing mock-up for EAST survived 1000 cycles at heat load of 5 MW m-2 in high heat flux tests. And then ASIPP prepared two mock-ups for CEA’s tungsten environment in steady-state tokamak (WEST) project. One mock-up withstood successfully 302 cycles of 20 MW m-2, which are far beyond the design requirement. Since 2014, W/Cu flat-type PFCs were wildly used in EAST upper divertor as baffle and dome components which showed excellent performance in 2015 and 2016 campaigns. Given the success in EAST upper divertor, W/Cu flat-type concept is as well applied in the design of actively cooled Langmuir probes which will be mounted onto EAST divertor targets soon.

  12. Development and application of W/Cu flat-type plasma facing components at ASIPP

    International Nuclear Information System (INIS)

    Li, Q; Sun, Z X; Xu, Y; Li, B; Wei, R; Wang, W J; Xie, C Y; Wang, J C; Wang, X L; Yang, Z S; Luo, G-N; Zhao, S X; Qin, S G; Shi, Y L; Liu, G H; Missirlian, M; Guilhem, D

    2017-01-01

    W/Cu flat-type plasma facing components (PFCs) were widely used in divertor of fusion device because of its advantages, such as low cost, light in weight and good machinability. However, it is very difficult to manufacture them due to the large mismatch between the thermo-mechanical properties of W and Cu. Institute of Plasma Physics, Chinese Academy of Sciences (ASIPP) has successfully developed W/Cu flat-type PFCs for EAST W/Cu divertor project by hot isostatic pressing (HIP) technology. This paper presents the development and application of W/Cu flat-type PFCs at ASIPP. The optimized manufacturing process is to cast pure copper onto the rear side of W tiles at temperature of 1200 °C firstly, and then to HIP the W/Cu tiles onto CuCrZr heat sink at temperature of 600 °C, pressure of 150 MPa and duration of 3 h. W/Cu flat-type testing mock-up for EAST survived 1000 cycles at heat load of 5 MW m −2 in high heat flux tests. And then ASIPP prepared two mock-ups for CEA’s tungsten environment in steady-state tokamak (WEST) project. One mock-up withstood successfully 302 cycles of 20 MW m −2 , which are far beyond the design requirement. Since 2014, W/Cu flat-type PFCs were wildly used in EAST upper divertor as baffle and dome components which showed excellent performance in 2015 and 2016 campaigns. Given the success in EAST upper divertor, W/Cu flat-type concept is as well applied in the design of actively cooled Langmuir probes which will be mounted onto EAST divertor targets soon. (paper)

  13. A dormant microbial component in the development of pre-eclampsia

    Directory of Open Access Journals (Sweden)

    Douglas Bruce Kell

    2016-11-01

    Full Text Available Pre-eclampsia (PE is a complex, multi-system disorder that remains a leading cause of morbidity and mortality in pregnancy. Four main classes of dysregulation accompany PE, and are widely considered to contribute to its severity. These are abnormal trophoblast invasion of the placenta, anti-angiogenic responses, oxidative stress, and inflammation. What is lacking, however, is an explanation of how these themselves are caused.We here develop the unifying idea, and the considerable evidence for it, that the originating cause of PE (and of the four classes of dysregulation is in fact microbial infection, that most such microbes are dormant and hence resist detection by conventional (replication-dependent microbiology, and that by occasional resuscitation and growth it is they that are responsible for all the observable sequelae, including the continuing, chronic inflammation. In particular, bacterial products such as lipopolysaccharide (LPS, also known as endotoxin, are well known as highly inflammagenic and stimulate an innate (and possibly trained immune response that exacerbates the inflammation further. The known need of microbes for free iron can explain the iron dysregulation that accompanies PE. We describe the main routes of infection (gut, oral, urinary tract infection and the regularly observed presence of microbes in placental and other tissues in PE. Every known proteomic biomarker of pre-eclampsia that we assessed has in fact also been shown to be raised in response to infection. An infectious component to PE fulfils the Bradford Hill criteria for ascribing a disease to an environmental cause, and suggests a number of treatments, some of which have in fact been shown to be successful.PE was classically referred to as endotoxaemia or toxaemia of pregnancy, and it is ironic that it seems that LPS and other microbial endotoxins really are involved. Overall, the recognition of an infectious component in the aetiology of PE mirrors that for

  14. Radioiodinated phenylalkyl malonic acid derivatives as pH-sensitive SPECT tracers.

    Directory of Open Access Journals (Sweden)

    Matthias Bauwens

    Full Text Available INTRODUCTION: In vivo pH imaging has been a field of interest for molecular imaging for many years. This is especially important for determining tumor acidity, an important driving force of tumor invasion and metastasis formation, but also in the process of apoptosis. METHODS: 2-(4-[(123I]iodophenethyl-2-methylmalonic acid (IPMM, 2-(4-[(123I]iodophenethyl-malonic acid (IPM, 2-(4-[(123I]iodobenzyl-malonic acid (IBMM and 4-[(123I]iodophthalic acid (IP were radiolabeled via the Cu(+ isotopic nucleophilic exchange method. All tracers were tested in vitro in buffer systems to assess pH driven cell uptake. In vivo biodistribution of [(123I]IPMM and [(123I]IPM was determined in healthy mice and the pH targeting efficacy in vivo of [(123I]IPM was evaluated in an anti-Fas monoclonal antibody (mAb apoptosis model. In addition a mouse RIF-1 tumor model was explored in which tumor pH was decreased from 7.0 to 6.5 by means of induction of hyperglycemia in combination with administration of meta-iodobenzylguanidine. RESULTS: Radiosynthesis resulted in 15-20% for iodo-bromo exchange and 50-60% yield for iodo-iodo exchange while in vitro experiments showed a pH-sensitive uptake for all tracers. Shelf-life stability and in vivo stability was excellent for all tracers. [(123I]IPMM and [(123I]IPM showed a moderately fast predominantly biliary clearance while a high retention was observed in blood. The biodistribution profile of [(123I]IPM was found to be most favorable in view of pH-specific imaging. [(123I]IPM showed a clear pH-related uptake pattern in the RIF-1 tumor model. CONCLUSION: Iodine-123 labeled malonic acid derivates such as [(123I]IPM show a clearly pH dependent uptake in tumor cells both in vitro and in vivo which allows to visualize regional acidosis. However, these compounds are not suitable for detection of apoptosis due to a poor acidosis effect.

  15. Late pest control in determinate tomato cultivars Controle de pragas tardias em cultivares de tomateiro de crescimento determinado

    Directory of Open Access Journals (Sweden)

    Arlindo Leal Boiça Júnior

    2007-12-01

    Full Text Available The usage of insecticidal plants and others insect resistant varieties can be strong allies to the Integrated Pest Management (IPM, being able to reduce the number of insecticides applications and to minimize its effect to the man and the environment.The following control techniques were compared in field conditions, investigating the late pest control of two determinate tomato cultivars: a Conventional - sprayings of metamidophos, buprofezin, acephate, cipermetrin, abamectin, permetrin, teflubenzuron and lufenuron, applied every three to six days; b IPM - action threshold of each pest to the spraying of imidacloprid, triflumuron, lufenuron and abamectin; c IPM - Azadirachta indica (neem - Action threshold of each pest to the spraying of the nim oil (1.2% of azadirachtin at a concentration of 0.5%. The IPM and IPM - Neem control techniques were efficient controlling the late pest of the tomato cultivar, not differing from the conventional treatment that presented the lowest levels of infestation. The conventional control technique, IPM and IPM-neem promoted bigger tomato production with increasements of up to 74%. The number of sprayings was reduced up to 77% with the IPM and IPM - neem techniques, when compared to the conventional method. The neem product may be a promising alternative to the late pest control in the tomato field that adjusts to the IPM.O uso de plantas inseticidas e de variedades pode ser forte aliado ao Manejo Integrado de Pragas (MIP, podendo reduzir o número de aplicações de inseticidas e minimizar seus efeitos ao homem e ao meio ambiente. Em condições de campo, visando o controle de pragas tardias do tomateiro em duas cultivares de crescimento determinado, compararam-se as seguintes táticas de controle: a Convencional - pulverizações com os produtos metamidofós, buprofezin, acefato, cipermetrina, abamectina, permetrina, teflubenzuron e lufenuron, aplicados em intervalos de três a seis dias; b MIP - nível de a

  16. Chemical ecology of moths : Role of semiochemicals in host location by Ectomyelois ceratoniae and mate guarding by Heliothis virescens

    NARCIS (Netherlands)

    Hosseini, S.A.

    2017-01-01

    Semiochemical-based behavioral manipulation has been increasingly implemented in Integrated Pest Management (IPM) as an environmentally friendly strategy. For many pest species, however, efficient methods have yet to be developed. An efficient sex pheromone attractant is missing in management of the

  17. 76 FR 75860 - National Forest System Invasive Species Management Policy

    Science.gov (United States)

    2011-12-05

    ... accomplished, increasing economic development opportunities and improving local economic stability, including... determination of an economic, human health, or environmental threshold that indicates when a pest population is... (economic or environmental factors). In principle, IPM is an ecologically-based holistic strategy that...

  18. Subcontract Report: Final Report on Assessment of Motor Technologies for Traction Drives of Hybrid and Electric Vehicles (Subcontract #4000080341)

    Energy Technology Data Exchange (ETDEWEB)

    Fezzler, Raymond [BIZTEK Consulting, Inc.

    2011-03-01

    Currently, interior permanent magnet (IPM) motors with rare-earth (RE) magnets are almost universally used for hybrid and electric vehicles (EVs) because of their superior properties, particularly power density. However, there is now a distinct possibility of limited supply or very high cost of RE magnets that could make IPM motors unavailable or too expensive. Because development of electric motors is a critical part of the U.S. Department of Energy (DOE) Advanced Power Electronics and Motors activity, DOE needs to determine which options should be investigated and what barriers should be addressed. Therefore, in order to provide a basis for deciding which research topics should be pursued, an assessment of various motor technologies was conducted to determine which, if any, is potentially capable of meeting FreedomCAR 2015 and 2020 targets. Highest priority was given to IPM, surface mounted permanent magnet (SPM), induction, and switched reluctance (SR) motors. Also of interest, but with lesser emphasis, were wheel motors, multiple-rotor motors, motors with external excitation, and several others that emerged from the assessment. Cost and power density (from a design perspective, the power density criterion translates to torque density) are emerging as the two most important properties of motors for traction drives in hybrid and EVs, although efficiency and specific power also are very important. The primary approach for this assessment involved interviews with original equipment manufacturers (OEMs), their suppliers, and other technical experts. For each technology, the following issues were discussed: (1) The current state-of-the-art performance and cost; (2) Recent trends in the technology; (3) Inherent characteristics of the motor - which ones limit the ability of the technology to meet the targets and which ones aid in meeting the target; (4) What research and development (R&D) would be needed to meet the targets; and (5) The potential for the technology to

  19. A Longitudinal Study of the e-Market for Software Components

    NARCIS (Netherlands)

    van Hillegersberg, Jos; Traas, Vincent; Dragt, Roland

    2001-01-01

    Component Based Software Development (CBD) holds high promises, but develops its full potential only when software components are traded in a component market. The Internet seems ideal for this purpose and various sources have predicted a bright future for the Internet Software Component Market

  20. Effects of Human Development Index and Its Components on Colorectal Cancer Incidence and Mortality: a Global Ecological Study.

    Science.gov (United States)

    Khazaei, Salman; Rezaeian, Shahab; Khazaei, Somayeh; Mansori, Kamyar; Sanjari Moghaddam, Ali; Ayubi, Erfan

    2016-01-01

    Geographic disparity for colorectal cancer (CRC) incidence and mortality according to the human development index (HDI) might be expected. This study aimed at quantifying the effect measure of association HDI and its components on the CRC incidence and mortality. In this ecological study, CRC incidence and mortality was obtained from GLOBOCAN, the global cancer project for 172 countries. Data were extracted about HDI 2013 for 169 countries from the World Bank report. Linear regression was constructed to measure effects of HDI and its components on CRC incidence and mortality. A positive trend between increasing HDI of countries and age-standardized rates per 100,000 of CRC incidence and mortality was observed. Among HDI components education was the strongest effect measure of association on CRC incidence and mortality, regression coefficients (95% confidence intervals) being 2.8 (2.4, 3.2) and 0.9 (0.8, 1), respectively. HDI and its components were positively related with CRC incidence and mortality and can be considered as targets for prevention and treatment intervention or tracking geographic disparities.

  1. Generic component failure data base

    International Nuclear Information System (INIS)

    Eide, S.A.; Calley, M.B.

    1992-01-01

    This report discusses comprehensive component generic failure data base which has been developed for light water reactor probabilistic risk assessments. The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) was used to generate component failure rates. Using this approach, most of the failure rates are based on actual plant data rather then existing estimates

  2. Future trends and needs in stored product entomology-pest management

    Science.gov (United States)

    Insect pest management in stored products, and in particular the concept of integrated pest management (IPM), has different meanings depending on one's viewpoint of IPM. One of the difficulties in stored products is adequately sampling large bulk bins or silos of raw stored grain or large milling an...

  3. Use of an Integrated Pest Management Assessment Administered through Turningpoint as an Educational, Needs Assessment, and Evaluation Tool

    Science.gov (United States)

    Stahl, Lizabeth A. B.; Behnken, Lisa M.; Breitenbach, Fritz R.; Miller, Ryan P.; Nicolai, David; Gunsolus, Jeffrey L.

    2016-01-01

    University of Minnesota educators use an integrated pest management (IPM) survey conducted during private pesticide applicator training as an educational, needs assessment, and evaluation tool. By incorporating the IPM Assessment, as the survey is called, into a widely attended program and using TurningPoint audience response devices, Extension…

  4. Air Pollution and Human Development in Europe: A New Index Using Principal Component Analysis

    Directory of Open Access Journals (Sweden)

    Ana-Maria Săndică

    2018-01-01

    Full Text Available EU countries to measure human development incorporating the ambient PM2.5 concentration effect. Using a principal component analysis, we extract the information for 2010 and 2015 using the Real GDP/capita, the life expectancy at birth, tertiary educational attainment, ambient PM2.5 concentration, and the death rate due to exposure to ambient PM2.5 concentration for 29 European countries. This paper has two main results: it gives an overview about the relationship between human development and ambient PM2.5 concentration, and second, it provides a new quantitative measure, PHDI, which reshapes the concept of human development and the exposure to ambient PM2.5 concentration. Using rating classes, we defined thresholds for both HDI and PHDI values to group the countries in four categories. When comparing the migration matrix from 2010 to 2015 for HDI values, some countries improved the development indicator (Romania, Poland, Malta, Estonia, Cyprus, while no downgrades were observed. When comparing the transition matrix using the newly developed indicator, PHDI, the upgrades observed were for Denmark and Estonia, while some countries like Spain and Italy moved to a lower rating class due to ambient PM2.5 concentration.

  5. Development of an Automated LIBS Analytical Test System Integrated with Component Control and Spectrum Analysis Capabilities

    International Nuclear Information System (INIS)

    Ding Yu; Tian Di; Chen Feipeng; Chen Pengfei; Qiao Shujun; Yang Guang; Li Chunsheng

    2015-01-01

    The present paper proposes an automated Laser-Induced Breakdown Spectroscopy (LIBS) analytical test system, which consists of a LIBS measurement and control platform based on a modular design concept, and a LIBS qualitative spectrum analysis software and is developed in C#. The platform provides flexible interfacing and automated control; it is compatible with different manufacturer component models and is constructed in modularized form for easy expandability. During peak identification, a more robust peak identification method with improved stability in peak identification has been achieved by applying additional smoothing on the slope obtained by calculation before peak identification. For the purpose of element identification, an improved main lines analysis method, which detects all elements on the spectral peak to avoid omission of certain elements without strong spectral lines, is applied to element identification in the tested LIBS samples. This method also increases the identification speed. In this paper, actual applications have been carried out. According to tests, the analytical test system is compatible with components of various models made by different manufacturers. It can automatically control components to get experimental data and conduct filtering, peak identification and qualitative analysis, etc. on spectral data. (paper)

  6. Manufacturing technology development for vacuum vessel and plasma facing components

    International Nuclear Information System (INIS)

    Laitinen, Arttu; Liimatainen, Jari; Hallila, Pentti

    2005-01-01

    Vacuum vessel and plasma facing components of the ITER construction including shield modules and primary first wall panels have great impact on the production costs and reliability of the installation. From the manufacturing technology point of view, accuracy of shape, properties of the various austenitic stainless steel/austenitic stainless steel interfaces or CuCrZr/austenitic stainless steel interfaces as well as those of the base materials are crucial for technical reliability of the construction. The current approach in plasma facing components has been utilisation of solid-HIP technology and solid-powder-HIP technology. Due to the large size of especially shield modules shape, control of the internal cavities and cooling channels is extremely demanding. This requires strict control of the raw materials and manufacturing parameters

  7. Language interoperability for high-performance parallel scientific components

    International Nuclear Information System (INIS)

    Elliot, N; Kohn, S; Smolinski, B

    1999-01-01

    With the increasing complexity and interdisciplinary nature of scientific applications, code reuse is becoming increasingly important in scientific computing. One method for facilitating code reuse is the use of components technologies, which have been used widely in industry. However, components have only recently worked their way into scientific computing. Language interoperability is an important underlying technology for these component architectures. In this paper, we present an approach to language interoperability for a high-performance parallel, component architecture being developed by the Common Component Architecture (CCA) group. Our approach is based on Interface Definition Language (IDL) techniques. We have developed a Scientific Interface Definition Language (SIDL), as well as bindings to C and Fortran. We have also developed a SIDL compiler and run-time library support for reference counting, reflection, object management, and exception handling (Babel). Results from using Babel to call a standard numerical solver library (written in C) from C and Fortran show that the cost of using Babel is minimal, where as the savings in development time and the benefits of object-oriented development support for C and Fortran far outweigh the costs

  8. Determination of material behavior in 700 C turbine components under component and load specific conditions

    Energy Technology Data Exchange (ETDEWEB)

    Lueckemeyer, N.; Kirchner, H.; Kern, T.U. [Siemens AG, Muehlheim (Germany). Energy Sector; Reigl, M. [Alstom Power, Baden (Switzerland); Klenk, A.; Klein, T. [Stuttgart Univ. (Germany). MPA; Schwienheer, M.; Cui, L.; Scholz, A.; Berger, C. [Institut fuer Werkstoffkunde (IfW), Darmstadt (Germany)

    2010-07-01

    With global warming being one of mankind's greatest challenges, an increasing demand for electricity world-wide, and studies showing that fossil resources like coal and gas will remain a major source for electricity for the next couple of decades, research into the development of highest efficiency fossil power plants has become a top priority. Calculations for coal fired power plants have shown that CO{sub 2} emissions can be reduced by as much as 7% compared to the current state of the art equipment. It can be reached by increasing the live steam parameters to 700 C and 350bar. To achieve the desired operating hours at this temperature the application of nickel base materials is necessary for the main components such as rotors, inner casings and valves. Nowadays, the use of Nickel base alloys is common practice for selected gas turbine components. However, with steam turbine rotors being 1000mm in diameter and casings with wall thicknesses higher than 100mm the gas turbine application range and experience for nickel base alloys are well exceeded. This paper uses a basic design for a steam turbine to illustrate the core challenges in developing nickel based steam turbine components, such as casting, forging, nondestructive testing and welding. Suitable nickel based alloys have been investigated in research projects over the past years. The research results are summarized and an explanation is given as to why Alloy617 was selected for forged components and Alloy625 for cast components. This paper then focuses on the material behavior under long term and complex loading conditions and on the development of life time concepts for thick walled components made from these alloys. Due to the differences in the material behavior of nickel base alloys, the existing steel design philosophies cannot be completely adopted but rather must be carefully evaluated and modified where necessary. To do this, large test components were manufactured. Based on both standard tests

  9. Development of radiation-tolerant components for the quench detection system at the CERN Large Hadron Collider

    International Nuclear Information System (INIS)

    Bitterling, Oliver

    2017-01-01

    This works describes the results of a three year project to improve the radiation tolerance of the Quench Protection System of the CERN Large Hadron Collider. Radiation-induced premature beam aborts have been a limiting factor for accelerator availability in the recent years. Furthermore, the future upgrade of the Large Hadron Collider to its High Luminosity phase will further increase the radiation load and has higher requirements for the overall machine availability. Therefore equipment groups like the Quench protection groups have used the last years to redesign many of their systems to fulfill those requirements. In support of the development of radiation-tolerant systems, several proton beam irradiation campaigns were conducted to determine the inherent radiation tolerance of a selection of varied electronic components. Using components from this selection a new Quench Protection System for the 600 A corrector magnets was developed. The radiation tolerance of this system was further improved by developing a filter and error correction system for all discovered failure modes. Furthermore, compliance of the new system with the specification was shown by simulating the behavior of the system using data taken from the irradiation campaigns. The resulting system is operational since the beginning of 2016 and has in the first 9 months of operation not shown a single radiation-induced failure. Using results from simulations and irradiation campaigns the predicted failure cross section for the full new 600 A Quench Protection System is 4.358±0.564.10 -10 cm 2 which is one order of magnitude lower than the target set during the development of this system.

  10. Safer Schools: Achieving a Healthy Learning Environment through Integrated Pest Management.

    Science.gov (United States)

    2003

    Integrated pest management (IPM) is a program of prevention, monitoring, and control that offers the opportunity to eliminate or drastically reduce hazardous pesticide use. IPM is intended to establish a program that uses cultural, mechanical, biological, and other non-toxic practices, and only introduces least-hazardous chemicals as a last…

  11. Evaluation of light attraction for the stored-product psocids, Liposcelis entomophila, L. paeta, and L. brunnea

    Science.gov (United States)

    Psocids have become global pests of stored commodities as they can cause considerable economic losses, and they are difficult to control because they have developed resistance to many chemical insecticides. Therefore, it is crucial to investigate alternative integrated pest management (IPM) approach...

  12. A hybrid analytical model for open-circuit field calculation of multilayer interior permanent magnet machines

    Science.gov (United States)

    Zhang, Zhen; Xia, Changliang; Yan, Yan; Geng, Qiang; Shi, Tingna

    2017-08-01

    Due to the complicated rotor structure and nonlinear saturation of rotor bridges, it is difficult to build a fast and accurate analytical field calculation model for multilayer interior permanent magnet (IPM) machines. In this paper, a hybrid analytical model suitable for the open-circuit field calculation of multilayer IPM machines is proposed by coupling the magnetic equivalent circuit (MEC) method and the subdomain technique. In the proposed analytical model, the rotor magnetic field is calculated by the MEC method based on the Kirchhoff's law, while the field in the stator slot, slot opening and air-gap is calculated by subdomain technique based on the Maxwell's equation. To solve the whole field distribution of the multilayer IPM machines, the coupled boundary conditions on the rotor surface are deduced for the coupling of the rotor MEC and the analytical field distribution of the stator slot, slot opening and air-gap. The hybrid analytical model can be used to calculate the open-circuit air-gap field distribution, back electromotive force (EMF) and cogging torque of multilayer IPM machines. Compared with finite element analysis (FEA), it has the advantages of faster modeling, less computation source occupying and shorter time consuming, and meanwhile achieves the approximate accuracy. The analytical model is helpful and applicable for the open-circuit field calculation of multilayer IPM machines with any size and pole/slot number combination.

  13. Evaluasi Manfaat Sekolah Lapang Pengendalian Hama Terpadu (SLPHT Perkebunan Kopi Rakyat dalam Meningkatkan Pendapatan Petani

    Directory of Open Access Journals (Sweden)

    Hendiarto Hendiarto

    2007-12-01

    Full Text Available Integrated pest management (IPM Farmers Field School (FFS on coffee crop had been conducted in East Java since 1998 until 2003. The IPM-FFS program aimed to increase productivity and quality of the coffee bean through the improvement of the crop and the environment. The aim of this paper was to 1 describe the benefit of the implementation of IPM practicing farmers. The tabulation descriptive method, the profit function and logit function analysis were used. Results showed that the application of IPM technology could increase the profit and the quality of the coffee bean and the price of coffee at farmer level obviously affected the farmer to adopt IPM and increase the income of the farming.   Sekolah Lapangan Pengendalian Hama Terpadu (SLPHT tanaman kopi telah dilaksanakan di provinsi Jawa Timur sejak tahun 1998 sampai 2003. Program SLPHT bertujuan untuk meningkatkan produktivitas dan kualitas biji kopi melalui perbaikan teknik budidaya tanaman dan perbaikan lingkungan. Tujuan tulisan ini adalah 1menjelaskan manfaat pelaksanaan teknologi PHT, dan 2 mengetahui faktor-faktor penentu yang mempengaruhi petani melaksanakan PHT. Untuk dapat menjawab tujuan dalam tulisan ini, digunakan metode deskriptif dan fungsi produksi dengan pendekatan fungsi keuntungan dan logit. Hasil analisis menunjukkan bahwa: 1 penerapan teknologi PHT dapat meningkatkan keuntungan dan kualtas biji kopi; 2 harga kopi di tingkat petani secara nyata mempengaruhi petani untuk menerapkan PHT dan meningkatkan pendapatan usaha tani.

  14. Modular and coordinated expression of immune system regulatory and signaling components in the developing and adult nervous system.

    Science.gov (United States)

    Monzón-Sandoval, Jimena; Castillo-Morales, Atahualpa; Crampton, Sean; McKelvey, Laura; Nolan, Aoife; O'Keeffe, Gerard; Gutierrez, Humberto

    2015-01-01

    During development, the nervous system (NS) is assembled and sculpted through a concerted series of neurodevelopmental events orchestrated by a complex genetic programme. While neural-specific gene expression plays a critical part in this process, in recent years, a number of immune-related signaling and regulatory components have also been shown to play key physiological roles in the developing and adult NS. While the involvement of individual immune-related signaling components in neural functions may reflect their ubiquitous character, it may also reflect a much wider, as yet undescribed, genetic network of immune-related molecules acting as an intrinsic component of the neural-specific regulatory machinery that ultimately shapes the NS. In order to gain insights into the scale and wider functional organization of immune-related genetic networks in the NS, we examined the large scale pattern of expression of these genes in the brain. Our results show a highly significant correlated expression and transcriptional clustering among immune-related genes in the developing and adult brain, and this correlation was the highest in the brain when compared to muscle, liver, kidney and endothelial cells. We experimentally tested the regulatory clustering of immune system (IS) genes by using microarray expression profiling in cultures of dissociated neurons stimulated with the pro-inflammatory cytokine TNF-alpha, and found a highly significant enrichment of immune system-related genes among the resulting differentially expressed genes. Our findings strongly suggest a coherent recruitment of entire immune-related genetic regulatory modules by the neural-specific genetic programme that shapes the NS.

  15. Advanced Optoelectronic Components for All-Optical Networks

    National Research Council Canada - National Science Library

    Shapiro, Jeffrey H

    2002-01-01

    Under APOSR Grant F49620-96-1-0126, 'Advanced Optoelectronic Components for All-Optical Networks', we have worked to develop key technologies and components to substantially improve the performance...

  16. The Farmer Field School: a method for enhancing the role of rural communities in malaria control ?

    Directory of Open Access Journals (Sweden)

    Knols Bart GJ

    2006-01-01

    Full Text Available Abstract Malaria has strong linkages with agriculture, and farmers in malarious regions have a central position in creating or controlling the conditions that favour disease transmission. An interdisciplinary and integrated approach is needed to involve farmers and more than one sector in control efforts. It is suggested that malaria control can benefit from a complementary intervention in rural development, the Farmer Field School (FFS on Integrated Pest Management (IPM. This is a form of education that uses experiential learning methods to build farmers' expertise, and has proven farm-level and empowerment effects. The benefits of incorporating malaria control into the IPM curriculum are discussed. An example of a combined health-agriculture curriculum, labeled Integrated Pest and Vector Management (IPVM, developed in Sri Lanka is presented. Institutional ownership and support for IPVM could potentially be spread over several public sectors requiring a process for institutional learning and reform.

  17. Development and fabrication aspects regarding tungsten components for a He-cooled divertor

    International Nuclear Information System (INIS)

    Krauss, W.; Holstein, N.; Konys, J.

    2005-01-01

    Under the EU framework of power plant conceptual study (PPCS), a modular He-cooled divertor concept is investigated, which is projected to remove high heat loads of up to 15 MW/m 2 . This design is based on a modular arrangement of cooling fingers consisting of a tile acting as sacrificial layer, a thimble through-flowed by high pressurized He and special micro-structured components for enhanced heat transfer. The success of this design is strongly correlated to the availability of special tungsten alloys and for the pin/slot option efficient micro-structuring of W or W-1% La 2 O 3 arrays. An evaluation of shaping technologies for array manufacturing under consideration of applicability, degree of development status, expected effectiveness and economy was performed and the most promising methods were tested. Based on the today's knowledge, electrical discharge machining (EDM) and laser etching (LE) allow the shaping of slot arrays; however, an impact on microstructure was detected. Technologies like powder injection moulding (PIM) or electro-chemically assisted machining processes (ECM) need further development and testing to be applied as reliable fabrication processes in structuring of W-alloys

  18. Explanation components as interactive tools

    Energy Technology Data Exchange (ETDEWEB)

    Wahlster, W.

    1983-01-01

    The ability to explain itself is probably the most important criterion of the user-friendliness of interactive systems. Explanation aids in the form of simple help functions do not meet this criterion. The reasons for this are outlined. More promising is an explanation component which can give the user intelligible and context-oriented explanations. The essential requirement for this is the development of knowledge-based interactive systems using artificial intelligence methods and techniques. The authors report on experiences with the development of explanation components, in particular a number of examples from the HAM-ANS project. 12 references.

  19. The 'Pole Nucleaire Bourgogne' for developing the nuclear components industry

    International Nuclear Information System (INIS)

    Kottmann, G.

    2012-01-01

    The 'Pole Nucleaire Bourgogne' (PNB) is a high-technology and heavy industries cluster in Burgundy with an international calling. It aims at innovating, educating and federating in order to place the French nuclear industry in a leading position. PNB gathers 76 small-, and medium-sized enterprises, most of them operating in the metal sector, in design and in the control/measuring sector. The aim of PNB is to make enterprises work and cooperate on specific topics according to their sectors of activities and their skills. PNB has identified 3 domains of strategical innovations: -) ecological manufacturing and durability of heavy components, -) controls for high performance components, and -) maintenance and dismantling techniques in hostile environments. The various industry sectors represented in PNB allows a cross-fertilization between high-tech industries (aeronautics, energy, transportation)

  20. Rethinking blood components and patients: Patient blood management. Possible ways for development in France.

    Science.gov (United States)

    Folléa, Gilles

    2016-01-01

    As any therapeutic means, blood transfusion requires regular evaluation, particularly for its indications, effectiveness and risks. A better awareness of the risks of blood transfusion, the availability of randomized clinical trials, the evolution of the quality of blood components, and the economic constraints shared by all countries, all have led to rethink both transfusion therapy as a whole and the organization of the transfusion chain from donor to recipient. In this context, patient blood management (PBM) appears as an evidence-based, patient centred, multidisciplinary approach, aiming to optimise the care of patients who might need transfusion and consequently the use of blood products. This paper presents updated scientific bases of PBM and the three pillars founding it. As PBM is developing fast in other European countries, this review proposes ways to explore for its development in France. It finally proposes to integrate PBM in a wider and coordinated approach of the blood supply management, with tools to improve the effectiveness and efficiency of the transfusion chain, starting with the needs of the patients and ending with an optimum treatment of the patient, including the appropriate number of blood components of the required quality. A better understanding, implementation and assessment of this coordinated global approach, allowing to adapt donor collections to the patients' needs in compliance with safety requirements for patients and donors, in a coordinated way, will certainly be a major challenge for transfusion medicine in the near future, for the benefit of patients, donors and all other stakeholders involved in the transfusion chain. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  1. Runtime Concepts of Hierarchical Software Components

    Czech Academy of Sciences Publication Activity Database

    Bureš, Tomáš; Hnětynka, P.; Plášil, František

    2007-01-01

    Roč. 8, special (2007), s. 454-463 ISSN 1525-9293 R&D Projects: GA AV ČR 1ET400300504 Institutional research plan: CEZ:AV0Z10300504 Keywords : component-based development * hierarchical components * connectors * controlers * runtime environment Subject RIV: JC - Computer Hardware ; Software

  2. Development of technology and properties investigation of steel/bronze joints proposed for ITER HHF components manufacturing

    International Nuclear Information System (INIS)

    Kalinin, G.; Krestnikov, N.S.; Strebkov, Y.S.; Abramov, V.Y.; Gervash, A.; Mazul, I.; Zolotarev, V.B.; Fabritsiev, S.A.

    2007-01-01

    Full text of publication follows: During the development of ITER HHF components manufacturing it is necessary to provide reliable joints between heat sink material made of CuCrZr bronze and the supporting construction made of austenitic steel. Four different methods have been tried out: - Hot Isostatic Pressing (HIP), - HIP assisted brazing, - furnace assisted brazing, - Casting. The investigation of structure and properties of joints show that HIP and casting provide the better results than the other technologies. However, HIP is relatively expensive technology, and big size HIP furnace is required for the full scale components manufacturing that are not available n RF now. Therefore, casting was selected as a reference manufacturing technology for the primary wall of ITER modules n RF. The paper summarizes the results of bronze/steel joints manufacturing and investigation of their properties. (authors)

  3. Influence of Inter stock Grafting as a Dwarfing Component on Peach Trees Development and Fruit Quality

    International Nuclear Information System (INIS)

    Hossain, S.; Nasrulhaq, A.; Mizutani, F.

    2006-01-01

    A field experiment was conducted to investigate the interstock grafting effect as a dwarfing component on Peach tree development and fruit quality. The study was made at the Ehime University Experimental farm located in south-eastern Japan during the period 2001-2005. The results of the field experiment indicated that pruned branches weight and flowers number were lower in interstock than in control trees. However, percent fruit set was a little higher in intersrock treated than in control trees. Fruit yield and fruit weight were lower in interstock treated than control trees. Soluble solids content and maturity index were higher in interstock treated trees than control, with an increasing trend in the period from 2001 to 2005, while titratable acidity showed that the livestock grafting is a useful dwarfing component for controlling the size of peach trees and improvement of fruit quality. (author)

  4. Safe Cockroach Control: A Guide to Setting Up an Integrated Pest Management Program within a School System.

    Science.gov (United States)

    Cowles, Kathleen Letcher; And Others

    Integrated Pest Management (IPM) is a decision-making approach to pest control that has been used successfully on farms, city parks, offices, homes, and schools. IPM programs help individuals decide when treatments are necessary, where treatment would be most helpful, and what combinations of tactics would be most effective, safe, and inexpensive…

  5. PERFORMANCE OF ALTERNATIVE COMPONENT PRICING SYSTEMS FOR PORK

    OpenAIRE

    Brorsen, B. Wade; Akridge, Jay T.; Boland, Michael A.; Mauney, Sean; Forrest, John C.

    1998-01-01

    One method of implementing value-based marketing is a component pricing system. This research develops and evaluates alternative component pricing systems for pork. Two electronic technologies for estimating carcass components (optical probe and electromagnetic scanner) were evaluated on two sets of data representing different populations. Model accuracy increased as additional components were added.

  6. Passive Microwave Components and Antennas

    DEFF Research Database (Denmark)

    State-of-the-art microwave systems always require higher performance and lower cost microwave components. Constantly growing demands and performance requirements of industrial and scientific applications often make employing traditionally designed components impractical. For that reason, the design...... and development process remains a great challenge today. This problem motivated intensive research efforts in microwave design and technology, which is responsible for a great number of recently appeared alternative approaches to analysis and design of microwave components and antennas. This book highlights...... techniques. Modelling and computations in electromagnetics is a quite fast-growing research area. The recent interest in this field is caused by the increased demand for designing complex microwave components, modeling electromagnetic materials, and rapid increase in computational power for calculation...

  7. Process-based modeling of species' responses to climate change - a proof of concept using western North American trees

    Science.gov (United States)

    Evans, M. E.; Merow, C.; Record, S.; Menlove, J.; Gray, A.; Cundiff, J.; McMahon, S.; Enquist, B. J.

    2013-12-01

    Current attempts to forecast how species' distributions will change in response to climate change suffer under a fundamental trade-off: between modeling many species superficially vs. few species in detail (between correlative vs. mechanistic models). The goals of this talk are two-fold: first, we present a Bayesian multilevel modeling framework, dynamic range modeling (DRM), for building process-based forecasts of many species' distributions at a time, designed to address the trade-off between detail and number of distribution forecasts. In contrast to 'species distribution modeling' or 'niche modeling', which uses only species' occurrence data and environmental data, DRMs draw upon demographic data, abundance data, trait data, occurrence data, and GIS layers of climate in a single framework to account for two processes known to influence range dynamics - demography and dispersal. The vision is to use extensive databases on plant demography, distributions, and traits - in the Botanical Information and Ecology Network, the Forest Inventory and Analysis database (FIA), and the International Tree Ring Data Bank - to develop DRMs for North American trees. Second, we present preliminary results from building the core submodel of a DRM - an integral projection model (IPM) - for a sample of dominant tree species in western North America. IPMs are used to infer demographic niches - i.e., the set of environmental conditions under which population growth rate is positive - and project population dynamics through time. Based on >550,000 data points derived from FIA for nine tree species in western North America, we show IPM-based models of their current and future distributions, and discuss how IPMs can be used to forecast future forest productivity, mortality patterns, and inform efforts at assisted migration.

  8. SOFA 2 Component Framework and Its Ecosystem

    Czech Academy of Sciences Publication Activity Database

    Malohlava, M.; Hnětynka, P.; Bureš, Tomáš

    2013-01-01

    Roč. 295, 9 May (2013), s. 101-106 ISSN 1571-0661. [FESCA 2012. International Workshop on Formal Engineering approaches to Software Components and Architectures /9./. Tallinn, 31.03.2012] R&D Projects: GA ČR GD201/09/H057 Grant - others:GA AV ČR(CZ) GAP202/11/0312; UK(CZ) SVV-2012-265312 Keywords : CBSE * component system * component model * component * sofa * ecosystem * development tool Subject RIV: JC - Computer Hardware ; Software

  9. Trends in chassis and automobile electronics components

    Energy Technology Data Exchange (ETDEWEB)

    Hackenberg, Ulrich [Volkswagen AG, Wolfsburg (Germany)

    2008-07-01

    The rapidly-growing importance of electronics in automobile construction is in part determined by the debate on sustainability and the clear trend towards electric power trains. Another factor, however, is the decisive impact of electronics on the further development of components, e.g. for chassis. Apart from environmental protection, key motivators for component development include comfort, safety, infotainment and driver assistance. (orig.)

  10. Design Basis of Core Components and their Realization in the frame of the EPR'sTM Core Component Development

    International Nuclear Information System (INIS)

    Schebitz, Florian; Mekmouche, Abdelhalim

    2008-01-01

    Rod Cluster Control Assemblies (RCCAs), Thimble Plug Assemblies (TPAs), Primary Neutron Sources (PNS) and Secondary Neutron Sources (SNS) are essential for the operation of a Nuclear Power Plant. Different functional requirements ask for different components and geometries. Therefore three different core components are used within the primary circuit: - The RCCA, which contains the absorber materials, is used to regulate and shut down the nuclear chain reaction. Under these demanding conditions different effects are determining the lifetime of the RCCA and in particular of the control rods. Several improvements like ion-nitriding of the cladding, lengthening of the bottom end plug, helium backfilling and reduction of the absorber diameter in the bottom part, which have already been introduced with the HARMONI TM RCCA, show a real improvement in terms of lifetime. - The TPAs are used at positions without RCCAs and neutron sources to limit the by-pass flow-rate in the fuel assembly guide tubes. The advanced TPA design results from a perfect combination of French and German design experience feedback. Benefits like homogenized hydraulic flow and improved manageability in terms of handling tools show the joined experience. - The neutron sources are used to enhance the flux level when the core is sub-critical so as to facilitate the core start-up control by the neutron flux detectors. Primary and secondary neutron sources are designed in a common way with reviewed and improved methodology. As there are different ways and conditions to operate core components, several designs are available. For the EPR TM , the best methods and products have been chosen. All chosen components contribute to an optimized and safe operation of the EPR TM . (authors)

  11. Research regarding reverse engineering for aircraft components

    Directory of Open Access Journals (Sweden)

    Udroiu Razvan

    2017-01-01

    Full Text Available Reverse engineering is a useful technique used in manufacturing and design process of new components. In aerospace industry new components can be developed, based on existing components without technical Computer Aided Design (CAD data, in order to reduce the development cycle of new products. This paper proposes a methodology wherein the CAD model of turbine blade can be build using computer aided reverse engineering technique utilising a 5 axis Coordinate Measuring Machine (CMM. The proposed methodology uses a scanning strategy by features, followed by a design methodology for 3D modelling of complex shapes.

  12. Gaby: a computer-based support system for integrated pest management in Dutch apple orchards

    NARCIS (Netherlands)

    Ende, van den E.; Blommers, L.; Trapman, M.

    1996-01-01

    In The Netherlands, a computerized advisory system (called Gaby) for integrated pest management (IPM) in apple has been developed to support the decision making of individual fruit growers. Gaby provides clear monitoring recommendations when this is appropriate for a particular pest in (a defined

  13. The cause, incidence and severity of a new gall damage on ...

    African Journals Online (AJOL)

    develop Integrated Pest Management (IPM) strategies against the new Eucalyptus pest. Key words: Alien insects, Galls. Leptocybe invasa, pest management, tree plantation. Introduction. Tree growing is important to many ... refugee settlements in Uganda to protect the environment while ensuring sustainable supply of tree ...

  14. Development of radiation-tolerant components for the quench detection system at the CERN Large Hadron Collider

    Energy Technology Data Exchange (ETDEWEB)

    Bitterling, Oliver

    2017-04-03

    This works describes the results of a three year project to improve the radiation tolerance of the Quench Protection System of the CERN Large Hadron Collider. Radiation-induced premature beam aborts have been a limiting factor for accelerator availability in the recent years. Furthermore, the future upgrade of the Large Hadron Collider to its High Luminosity phase will further increase the radiation load and has higher requirements for the overall machine availability. Therefore equipment groups like the Quench protection groups have used the last years to redesign many of their systems to fulfill those requirements. In support of the development of radiation-tolerant systems, several proton beam irradiation campaigns were conducted to determine the inherent radiation tolerance of a selection of varied electronic components. Using components from this selection a new Quench Protection System for the 600 A corrector magnets was developed. The radiation tolerance of this system was further improved by developing a filter and error correction system for all discovered failure modes. Furthermore, compliance of the new system with the specification was shown by simulating the behavior of the system using data taken from the irradiation campaigns. The resulting system is operational since the beginning of 2016 and has in the first 9 months of operation not shown a single radiation-induced failure. Using results from simulations and irradiation campaigns the predicted failure cross section for the full new 600 A Quench Protection System is 4.358±0.564.10{sup -10} cm{sup 2} which is one order of magnitude lower than the target set during the development of this system.

  15. The development of summary components for the Disablement in the Physically Active scale in collegiate athletes.

    Science.gov (United States)

    Houston, Megan N; Hoch, Johanna M; Van Lunen, Bonnie L; Hoch, Matthew C

    2015-11-01

    The Disablement in the Physically Active scale (DPA) is a generic patient-reported outcome designed to evaluate constructs of disability in physically active populations. The purpose of this study was to analyze the DPA scale structure for summary components. Four hundred and fifty-six collegiate athletes completed a demographic form and the DPA. A principal component analysis (PCA) was conducted with oblique rotation. Factors with eigenvalues >1 that explained >5 % of the variance were retained. The PCA revealed a two-factor structure consistent with paradigms used to develop the original DPA. Items 1-12 loaded on Factors 1 and Items 13-16 loaded on Factor 2. Items 1-12 pertain to impairment, activity limitations, and participation restrictions. Items 13-16 address psychosocial and emotional well-being. Consideration of item content suggested Factor 1 concerned physical function, while Factor 2 concerned mental well-being. Thus, items clustered around Factor 1 and 2 were identified as physical (DPA-PSC) and mental (DPA-MSC) summary components, respectively. Together, the factors accounted for 65.1 % of the variance. The PCA revealed a two-factor structure for the DPA that resulted in DPA-PSC and DPA-MSC. Analyzing the DPA as separate constructs may provide distinct information that could help to prescribe treatment and rehabilitation strategies.

  16. Development of A General Principle Solution Forisoagrinet Compliant Networking System Components in Animal Husbandry

    Science.gov (United States)

    Kuhlmann, Arne; Herd, Daniel; Röβler, Benjamin; Gallmann, Eva; Jungbluth, Thomas

    In pig production software and electronic systems are widely used for process control and management. Unfortunately most devices on farms are proprietary solutions and autonomically working. To unify data communication of devices in agricultural husbandry, the international standard ISOagriNET (ISO 17532:2007) was developed. It defines data formats and exchange protocols, to link up devices like climate controls, feeding systems and sensors, but also management software. The aim of the research project, "Information and Data Collection in Livestock Systems" is to develop an ISOagriNET compliant IT system, a so called Farming Cell. It integrates all electronic components to acquire the available data and information for pig fattening. That way, an additional benefit to humans, animals and the environment regarding process control and documentation, can be generated. Developing the Farming Cell is very complex; in detail it is very difficult and long-winded to integrate hardware and software by various vendors into an ISOagriNET compliant IT system. This ISOagriNET prototype shows as a test environment the potential of this new standard.

  17. Advanced Environmental Barrier Coating Development for SiC-SiC Ceramic Matrix Composite Components

    Science.gov (United States)

    Zhu, Dongming; Harder, Bryan; Hurst, Janet B.; Halbig, Michael Charles; Puleo, Bernadette J.; Costa, Gustavo; Mccue, Terry R.

    2017-01-01

    This presentation reviews the NASA advanced environmental barrier coating (EBC) system development for SiC-SiC Ceramic Matrix Composite (CMC) combustors particularly under the NASA Environmentally Responsible Aviation, Fundamental Aeronautics and Transformative Aeronautics Concepts Programs. The emphases have been placed on the current design challenges of the 2700-3000F capable environmental barrier coatings for low NOX emission combustors for next generation turbine engines by using advanced plasma spray based processes, and the coating processing and integration with SiC-SiC CMCs and component systems. The developments also have included candidate coating composition system designs, degradation mechanisms, performance evaluation and down-selects; the processing optimizations using TriplexPro Air Plasma Spray Low Pressure Plasma Spray (LPPS), Plasma Spray Physical Vapor Deposition and demonstration of EBC-CMC systems. This presentation also highlights the EBC-CMC system temperature capability and durability improvements under the NASA development programs, as demonstrated in the simulated engine high heat flux, combustion environments, in conjunction with high heat flux, mechanical creep and fatigue loading testing conditions.

  18. Isopropyl Myristate-Modified Polyether-Urethane Coatings as Protective Barriers for Implantable Medical Devices

    Science.gov (United States)

    Roohpour, Nima; Wasikiewicz, Jaroslaw M.; Moshaverinia, Alireza; Paul, Deepen; Rehman, Ihtesham U.; Vadgama, Pankaj

    2009-01-01

    Polyurethane films have potential applications in medicine, especially for packaging implantable medical devices. Although polyether-urethanes have superior mechanical properties and are biocompatible, achieving water resistance is still a challenge. Polyether based polyurethanes with two different molecular weights (PTMO1000, PTMO2000) were prepared from 4,4’-diphenylmethane diisocyanate and poly(tetra-methylene oxide). Polymer films were introduced using different concentrations (0.5-10 wt %) of isopropyl myristate lipid (IPM) as a non-toxic modifying agent. The physical and mechanical properties of these polymers were characterised using physical and spectroscopy techniques (FTIR, Raman, DSC, DMA, tensile testing). Water contact angle and water uptake of the membranes as a function of IPM concentration was also determined accordingly. The FTIR and Raman data indicate that IPM is dispersed in polyurethane at ≤ 2wt% and thermal analysis confirmed this miscibility to be dependent on soft segment length. Modified polymers showed increased tensile strength and failure strain as well as reduced water uptake by up to 24% at 1-2 wt% IPM.

  19. Isopropyl Myristate-Modified Polyether-Urethane Coatings as Protective Barriers for Implantable Medical Devices

    Directory of Open Access Journals (Sweden)

    Pankaj Vadgama

    2009-06-01

    Full Text Available Polyurethane films have potential applications in medicine, especially for packaging implantable medical devices. Although polyether-urethanes have superior mechanical properties and are biocompatible, achieving water resistance is still a challenge. Polyether based polyurethanes with two different molecular weights (PTMO1000, PTMO2000 were prepared from 4,4’-diphenylmethane diisocyanate and poly(tetra-methylene oxide. Polymer films were introduced using different concentrations (0.5-10 wt % of isopropyl myristate lipid (IPM as a non-toxic modifying agent. The physical and mechanical properties of these polymers were characterised using physical and spectroscopy techniques (FTIR, Raman, DSC, DMA, tensile testing. Water contact angle and water uptake of the membranes as a function of IPM concentration was also determined accordingly. The FTIR and Raman data indicate that IPM is dispersed in polyurethane at ≤ 2wt% and thermal analysis confirmed this miscibility to be dependent on soft segment length. Modified polymers showed increased tensile strength and failure strain as well as reduced water uptake by up to 24% at 1-2 wt% IPM.

  20. Safety and availability of dapivirine (TMC120) delivered from an intravaginal ring.

    Science.gov (United States)

    Romano, J; Variano, B; Coplan, P; Van Roey, J; Douville, K; Rosenberg, Z; Temmerman, M; Verstraelen, H; Van Bortel, L; Weyers, S; Mitchnick, M

    2009-05-01

    Vaginal delivery of 200 mg or 25 mg dapivirine from intravaginal rings (IVRs) was evaluated over a 7-day period in two phase 1 safety trials (IPM001 and IPM008, respectively) in a total of 25 healthy women 19 to 46 years of age. The IVR was generally safe and well tolerated with similar adverse events observed in the placebo and dapivirine groups. Across both studies, dapivirine concentrations in vaginal fluids measured at the introitus, cervix, and ring area were within the mean range of 0.7-7.1 microg/ml. Mean dapivirine concentrations in vaginal and cervical tissues on day 7 were 0.3-0.7 microg/g in IPM001 and 1.5-3.5 microg/g in IPM008. Mean plasma concentrations of dapivirine were Dapivirine from both IVRs was successfully distributed throughout the lower genital tract at concentrations >1000x the EC(50) against wild-type HIV-1 (LAI) in MT4 cells suggesting that IVR delivery of microbicides is a viable option meriting further study.

  1. Development of a Multi-Point Quantitation Method to Simultaneously Measure Enzymatic and Structural Components of the Clostridium thermocellum Cellulosome Protein Complex

    Energy Technology Data Exchange (ETDEWEB)

    Dykstra, Andrew B [ORNL; St. Brice, Lois [Dartmouth College; Rodriguez, Jr., Miguel [ORNL; Raman, Babu [ORNL; Izquierdo, Javier [ORNL; Cook, Kelsey [ORNL; Lynd, Lee R [ORNL; Hettich, Robert {Bob} L [ORNL

    2014-01-01

    Clostridium thermocellum has emerged as a leading bioenergy-relevant microbe due to its ability to solubilize cellulose into carbohydrates, mediated by multi-component membrane-attached complexes termed cellulosomes. To probe microbial cellulose utilization rates, it is desirable to be able to measure the concentrations of saccharolytic enzymes and estimate the total amount of cellulosome present on a mass basis. Current cellulase determination methodologies involve labor-intensive purification procedures and only allow for indirect determination of abundance. We have developed a method using multiple reaction monitoring (MRM-MS) to simultaneously quantitate both enzymatic and structural components of the cellulosome protein complex in samples ranging in complexity from purified cellulosomes to whole cell lysates, as an alternative to a previously-developed enzyme-linked immunosorbent assay (ELISA) method of cellulosome quantitation. The precision of the cellulosome mass concentration in technical replicates is better than 5% relative standard deviation for all samples, indicating high precision for determination of the mass concentration of cellulosome components.

  2. Fabrication of ion source components by electroforming

    International Nuclear Information System (INIS)

    Schechter, D.E.; Sluss, F.

    1983-01-01

    Several components of the Oak Ridge National Laboratory (ORNL)/Magnetic Fusion Test Facility (MFTF-B) ion source have been fabricated utilizing an electroforming process. A procedure has been developed for enclosing coolant passages in copper components by electrodepositing a thick (greater than or equal to 0.75-mm) layer of copper (electroforming) over the top of grooves machined into the copper component base. Details of the procedure to fabricate acceleration grids and other ion source components are presented

  3. Indigenous development and performance evaluation of BARC aerodynamic size separator (BASS)

    CERN Document Server

    Singh, S; Khan, A; Mayya, Y S; Narayanan, K P; Purwar, R C; Sapra, B K; Sunny, F

    2002-01-01

    Commercially available cascade impactors, commonly used for aerodynamic size separation of aerosol particles, are based on the principle of inertial impaction. As of now, these instruments are imported at a cost of several lakhs of rupees; hence an effort has been made to develop an aerodynamic particle sizer indigenously in BARC. This unit, referred to as BARC Aerodynamic Size Separator (BASS), separates aerosols into seven size classes ranging from 0.53 mu m to 10 mu m and operates at a flow rate of 45 Ipm. Intercomparison studies between the standard Andersen Mark-II (Grasbey Andersen Inc.) impactor and BASS using nebulizer generated aerosols have consistently shown excellent performance by BASS in all respects. In particular, BASS yielded the parameters of polydisperse aerosols quite accurately. Experiments to evaluate the individual stage cut-off diameters show that these are within 8% of their designed value for all stages except the higher two stages which indicate about 30% lower values than the desig...

  4. High temperature testing - a contribution to alloy development, alloy qualification and simulation of component Loading

    International Nuclear Information System (INIS)

    Scholz, A.; Schwienheer, M.; Mueller, F.; Linn, S.; Schein, M.; Walther, C.; Berger, C.

    2007-01-01

    In parallel to continued developments of steam and gas turbines as well as traffic engineering machines on the one hand, and marginal conditions like low specific fuel consumption and sufficient environment-friendliness on the other hand, the aim of improving the degree of efficiency by augmenting process parameters such as temperature and pressure is being followed. These efforts impact especially components of thermic machines and facilities subject to high thermal and mechanic exposure. Still largely unexplored is the interaction between microstructure characteristics determined through chemical composition, production processes and heat treatment, changes in the microstructure due to multiaxial load and the time-dependent deformation and stability resulting hereof. With regard to this background, improved methods of material properties determination, their modelling and transfer on the component enable to optimize wall thicknesses and degrees of efficiency. In the course of evaluation of static and cyclic material properties carried out also on faulty specimens, uncertainties occur which can originate from the testing process and analysis, as well as being influenced by the material itself and its process of production. Altogether, the demand for reliable determination of material properties and methods of scatterband treatment and their mathematical-statistical evaluation is in business. For simulation, consistent material datasets that describe the complex interaction between temperature, period of exposure and type of exposure are needed. Summarizing, the tasks dealt with qualify the entire process from production to the operational behaviour of components. (Abstract Copyright [2007], Wiley Periodicals, Inc.) [de

  5. Gamma dose effects valuation on micro computing components

    International Nuclear Information System (INIS)

    Joffre, F.

    1995-01-01

    Robotics in hostile environment raises the problem of micro computing components resistance with gamma radiation cumulated dose. The current aim is to reach a dose of 3000 grays with industrial components. A methodology and an instrumentation adapted to test this type of components have been developed. The aim of this work is to present the advantages and disadvantages bound to the use of industrial components in the presence of gamma radiation. After an analysis of the criteria allowing to justify the technological choices, the different steps which characterize the selection and the assessment methodology used are explained. The irradiation and measures means now operational are mentioned. Moreover, the supply aspects of the chosen components for the design of an industrialized system is taken into account. These selection and assessment components contribute to the development and design of computers for civil nuclear robotics. (O.M.)

  6. Development of plasma facing components with functionally gradient layers

    Energy Technology Data Exchange (ETDEWEB)

    Morimoto, M.; Kudough, F. [Mitsubishi Atomic Power Industries, Inc., Yokohama (Japan); Onozuka, M.; Tsunoda, H.; Toyoda, M. [Mitsubishi Heavy Industries, Ltd., Yokohama (Japan)

    1994-11-01

    The use of functionally graded layers (FGLs) for plasma facing components (PFCs), owing to moderate or piecewise transition in material properties from low-Z surface materials to metal substrates, can provide reduction in thermal stresses, and also provide high thermal load resistance to PFCs. This article deals with the comparison of high heat flux testing and thermal stress analysis results on PFCs. Thermal stress analyses confirmed the thermal loading test results.

  7. Developing an OMERACT Core Outcome Set for Assessing Safety Components in Rheumatology Trials

    DEFF Research Database (Denmark)

    Klokker, Louise; Tugwell, Peter; Furst, Daniel E

    2016-01-01

    in such COS. The Outcome Measures in Rheumatology (OMERACT) Filter 2.0 emphasizes the importance of measuring harms. The Safety Working Group was reestablished at the OMERACT 2016 with the objective to develop a COS for assessing safety components in trials across rheumatologic conditions. METHODS: The safety......OBJECTIVE: Failure to report harmful outcomes in clinical research can introduce bias favoring a potentially harmful intervention. While core outcome sets (COS) are available for benefits in randomized controlled trials in many rheumatic conditions, less attention has been paid to safety...... that patients consider relevant so that they will be able to make informed decisions. CONCLUSION: The OMERACT Safety Working Group will advance the work previously done within OMERACT using a new patient-driven approach....

  8. Prediction of resistance development against drug combinations by collateral responses to component drugs

    DEFF Research Database (Denmark)

    Munck, Christian; Gumpert, Heidi; Nilsson Wallin, Annika

    2014-01-01

    the genomes of all evolved E. coli lineages, we identified the mutational events that drive the differences in drug resistance levels and found that the degree of resistance development against drug combinations can be understood in terms of collateral sensitivity and resistance that occurred during...... adaptation to the component drugs. Then, using engineered E. coli strains, we confirmed that drug resistance mutations that imposed collateral sensitivity were suppressed in a drug pair growth environment. These results provide a framework for rationally selecting drug combinations that limit resistance......Resistance arises quickly during chemotherapeutic selection and is particularly problematic during long-term treatment regimens such as those for tuberculosis, HIV infections, or cancer. Although drug combination therapy reduces the evolution of drug resistance, drug pairs vary in their ability...

  9. Magnetic fusion energy plasma interactive and high heat flux components. Volume III. Strategy for international collaborations in the areas of plasma materials interactions and high heat flux materials and components development

    International Nuclear Information System (INIS)

    Gauster, W.B.; Bauer, W.; Roberto, J.B.; Post, D.E.

    1984-01-01

    The purpose of this summary is to assess opportunities for such collaborations in the specific areas of Plasma Materials Interaction and High Heat Flux Materials and Components Development, and to aid in developing a strategy to take advantage of them. After some general discussion of international collaborations, we summarize key technical issues and the US programs to address them. Then follows a summary of present collaborations and potential opportunities in foreign laboratories

  10. Component fragility research program

    International Nuclear Information System (INIS)

    Tsai, N.C.; Mochizuki, G.L.; Holman, G.S.

    1989-11-01

    To demonstrate how ''high-level'' qualification test data can be used to estimate the ultimate seismic capacity of nuclear power plant equipment, we assessed in detail various electrical components tested by the Pacific Gas ampersand Electric Company for its Diablo Canyon plant. As part of our Phase I Component Fragility Research Program, we evaluated seismic fragility for five Diablo Canyon components: medium-voltage (4kV) switchgear; safeguard relay board; emergency light battery pack; potential transformer; and station battery and racks. This report discusses our Phase II fragility evaluation of a single Westinghouse Type W motor control center column, a fan cooler motor controller, and three local starters at the Diablo Canyon nuclear power plant. These components were seismically qualified by means of biaxial random motion tests on a shaker table, and the test response spectra formed the basis for the estimate of the seismic capacity of the components. The seismic capacity of each component is referenced to the zero period acceleration (ZPA) and, in our Phase II study only, to the average spectral acceleration (ASA) of the motion at its base. For the motor control center, the seismic capacity was compared to the capacity of a Westinghouse Five-Star MCC subjected to actual fragility tests by LLNL during the Phase I Component Fragility Research Program, and to generic capacities developed by the Brookhaven National Laboratory for motor control center. Except for the medium-voltage switchgear, all of the components considered in both our Phase I and Phase II evaluations were qualified in their standard commercial configurations or with only relatively minor modifications such as top bracing of cabinets. 8 refs., 67 figs., 7 tabs

  11. Étude des bactéries multirésistantes des effluents hospitaliers d'un ...

    African Journals Online (AJOL)

    SARAH

    30 sept. 2013 ... J. Appl. Biosci. 2013. Étude des bacteries multiresistantes des effluents hospitaliers de la ville d, Abidjan. 5459. Imipénème (10). IPM. 22. 17. Acinetobacter baumanii. Ticarcilline (75). TIC. 22. 22. Cefepime (30). FEP. 19. 19. Imipénème (10). IPM. 22. 17. Ciprofloxacine (5). CIP. 22. 19. Gentamicine (15). GM.

  12. Software Components for Serious Game Development

    NARCIS (Netherlands)

    Westera, Wim; Van der Vegt, Wim; Bahreini, Kiavash; Dascalu, Mihai; Van Lankveld, Giel

    2016-01-01

    The large upfront investments required for game development pose a severe barrier for the wider uptake of serious games in education and training. Also, there is a lack of well-established methods and tools that support game developers at preserving and enhancing the games’ pedagogical

  13. The integrated control concept and its relevance to current integrated pest management in California fresh market grapes.

    Science.gov (United States)

    Bentley, Walter J

    2009-12-01

    The foundation of an integrated pest management program involves valid treatment thresholds, accurate and simple monitoring methods, effective natural controls, selective pesticides and trained individuals who can implement the concept. The Integrated Control Concept written by Stern, Smith, van den Bosch and Hagen elucidated each of these points in an alfalfa ecosystem. Alfalfa hay (Medicago sativa L.) has a low per acre value, requires little hand labor and is primarily marketed in the USA. In contrast, fresh market table grape (Vitis vinifera L.) has a high per acre value, requires frequent hand labor operations, suffers unacceptable cosmetic damage and is marketed throughout both the USA and the world. Each of the components of a working IPM program is present in table grape production. Marketing grapes to foreign countries presents special problems with pests considered invasive and where residue tolerances for some selective insecticides are lacking. However, fresh market grape farmers are still able to deal with these special problems and utilize an IPM program that has resulted in a 42% reduction in broad-spectrum insecticide use from 1995 to 2007. (c) 2009 Society of Chemical Industry.

  14. Inertial confinement fusion target component fabrication and technology development support: Annual report, October 1, 1997--September 30, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Gibson, J. [ed.

    1998-12-01

    During this period, General Atomics (GA) and their partner Schafer Corporation were assigned 17 formal tasks in support of the Inertial Confinement Fusion (ICF) program and its five laboratories. A portion of the effort on these tasks included providing direct ``On-site Support`` at Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), and Sandia National Laboratory Albuquerque (SNLA). They fabricated and delivered over 1,200 hohlraum mandrels and numerous other micromachined components to LLNL, LANL, and SNLA. They produced more than 1,300 glass and plastic target capsules for LLNL, LANL, SNLA, and the University of Rochester/Laboratory for Laser Energetics (UR/LLE). They also delivered nearly 2,000 various target foils and films for Naval Research Lab (NRL) and UR/LLE in FY98. This report describes these target fabrication activities and the target fabrication and characterization development activities that made the deliveries possible. During FY98, great progress was made by the GA/Schafer-UR/LLE-LANL team in the design, procurement, installation, and testing of the OMEGA Cryogenic Target System (OCTS) that will field cryogenic targets on OMEGA. The design phase was concluded for all components of the OCTS and all major components were procured and nearly all were fabricated. Many of the components were assembled and tested, and some have been shipped to UR/LLE. The ICF program is anticipating experiments at the OMEGA laser and the National Ignition Facility (NIF) which will require targets containing cryogenic layered D{sub 2} or deuterium-tritium (DT) fuel. They are part of the National Cryogenic Target Program and support experiments at LLNL and LANL to generate and characterize cryogenic layers for these targets. They also contributed cryogenic support and developed concepts for NIF cryogenic targets. This report summarizes and documents the technical progress made on these tasks.

  15. Inertial confinement fusion target component fabrication and technology development support: Annual report, October 1, 1997 - September 30, 1998

    International Nuclear Information System (INIS)

    Gibson, J.

    1998-12-01

    During this period, General Atomics (GA) and their partner Schafer Corporation were assigned 17 formal tasks in support of the Inertial Confinement Fusion (ICF) program and its five laboratories. A portion of the effort on these tasks included providing direct ''On-site Support'' at Lawrence Livermore National Laboratory (LLNL), Los Alamos National Laboratory (LANL), and Sandia National Laboratory Albuquerque (SNLA). They fabricated and delivered over 1,200 hohlraum mandrels and numerous other micromachined components to LLNL, LANL, and SNLA. They produced more than 1,300 glass and plastic target capsules for LLNL, LANL, SNLA, and the University of Rochester/Laboratory for Laser Energetics (UR/LLE). They also delivered nearly 2,000 various target foils and films for Naval Research Lab (NRL) and UR/LLE in FY98. This report describes these target fabrication activities and the target fabrication and characterization development activities that made the deliveries possible. During FY98, great progress was made by the GA/Schafer-UR/LLE-LANL team in the design, procurement, installation, and testing of the OMEGA Cryogenic Target System (OCTS) that will field cryogenic targets on OMEGA. The design phase was concluded for all components of the OCTS and all major components were procured and nearly all were fabricated. Many of the components were assembled and tested, and some have been shipped to UR/LLE. The ICF program is anticipating experiments at the OMEGA laser and the National Ignition Facility (NIF) which will require targets containing cryogenic layered D 2 or deuterium-tritium (DT) fuel. They are part of the National Cryogenic Target Program and support experiments at LLNL and LANL to generate and characterize cryogenic layers for these targets. They also contributed cryogenic support and developed concepts for NIF cryogenic targets. This report summarizes and documents the technical progress made on these tasks

  16. Strategic Guidelines for Development of the Infocommunication Sphere as a Component of the National Innovation Infrastructure

    Directory of Open Access Journals (Sweden)

    Koval Victor V.

    2017-03-01

    Full Text Available The aim of the article is to study and systematize the factors affecting the potential of the innovation infrastructure to improve the quality of conditions of its formation on the basis of elaborating a strategy for the development of the infocommunication sphere. The article considers the current state of development of the infocommunication sphere and approaches to analyzing its role in relation to the goals and tasks facing the national innovation system. It is substantiated that infocommunication technologies act as an innovative tool that contributes to the development of innovations and their commercialization, while enterprises of the infocommunication sphere act as subjects of the innovation infrastructure, which main goal is to intensify innovation efforts and ensure innovation activity. The strategic problems of formation and prospects of development of the infocommunication sphere as a component of the national innovation infrastructure are analyzed.

  17. IPM potentials of microbial pathogens and diseases of mites

    NARCIS (Netherlands)

    van der Geest, L.P.S.; Ciancio, A.; Mukerji, K.G.

    2010-01-01

    An overview is given of diseases in mites, caused by infectious microorganisms. Many pathogens play an important role in the regulation of natural populations of mite populations and are for this reason subject of research on the feasibility to develop such pathogens to biological control agents.

  18. Development of a mobile unit for 'in loco' sistematic decontamination in nuclear power plants components

    International Nuclear Information System (INIS)

    Camargo, G.A.M.

    1986-01-01

    A mobile decontamination unit was developed to perform 'in situ' decontamination of tanks and pressure vessels belonging to the reactor auxiliary and ancillary systems. The whole system, including a control desk, is assembled in 6 trolleys which can be moved inside the plant, thus enabling component decontamination by injecting demineralized water at a pressure of approx. 50 bar and temperatures up to 90 0 , with or without chemical additives. Considering the versatility and easy handling demonstrated after extensive testing, this new system shall be used in Angra 2 and 3. (Author) [pt

  19. Capacity building in water demand management as a key component for attaining millennium development goals

    Science.gov (United States)

    Gumbo, Bekithemba; Forster, Laura; Arntzen, Jaap

    Successful water demand management (WDM) implementation as a component of integrated water resource management (IWRM) can play a significant role in the alleviation of poverty through more efficient use of available water resources. The urban population in Southern African cities is characterised by so-called ‘water poor’ communities who typically expend a high percentage of their household income on poor quality water. Usually they have no access to an affordable alternative source. Although WDM as a component of IWRM is not a panacea for poverty, it can help alleviate poverty by facilitating water services management by municipal water supply agencies (MWSAs) in the region. WDM is a key strategy for achieving the millennium development goals (MDGs) and, as such, should be given due attention in the preparation of national IWRM and water efficiency plans. Various studies in the Southern African region have indicated that capacity building is necessary for nations to develop IWRM and water-use efficiency plans to meet the targets set out in the MDGs. WDM education and training of water professionals and end-users is particularly important in developing countries, which are resource and information-access poor. In response to these findings, The World Conservation Union (IUCN) and its consulting partners, the Training and Instructional Design Academy of South Africa (TIDASA), and Centre for Applied Research (CAR) designed, developed and presented a pilot WDM Guideline Training Module for MWSAs as part of Phase II of IUCN’s Southern Africa regional WDM project. Pilot training was conducted in July 2004 in Lusaka, Zambia for a group of 36 participants involved in municipal water supply from nine Southern African countries. This paper looks at the links between building the capacity of professionals, operational staff and other role-players in the municipal water supply chain to implement WDM as part of broader IWRM strategies, and the subsequent potential for

  20. Ecological risks of biological control agents: impacts on IPM

    NARCIS (Netherlands)

    Hokkanen, H.M.T.; Lenteren, van J.C.; Menzler-Hokkanen, I.

    2007-01-01

    Since the early days of integrated pest management a sound ecological foundation has been considered essential for the development of effective systems. From time to time, there have been attempts to evaluate the ways in which ecological theory is exploited in pest control, and to review the lessons