WorldWideScience

Sample records for developing castor oil

  1. Develop a New Lesquerella fendleri Crop for Castor Oil Production

    Science.gov (United States)

    Seed oil of Lesquerella fendleri contains a valuable hydroxy fatty acid (HFA), lesquerolic acid (20:1OH). The conventional source of HFA is ricinoleic acid (18:1OH) from castor seeds. Ricinoleic acid and its derivatives are used as raw materials for numerous industrial products, such as lubricants, ...

  2. Isotope labeling-based quantitative proteomics of developing seeds of castor oil seed (Ricinus communis L.)

    DEFF Research Database (Denmark)

    Nogueira, Fábio C S; Palmisano, Giuseppe; Schwämmle, Veit

    2013-01-01

    In this study, we used a mass spectrometry-based quantification approach employing isotopic (ICPL) and isobaric (iTRAQ) labeling to investigate the pattern of protein deposition during castor oil seed (Ricinus communis L.) development, including that of proteins involved in fatty acid metabolism...... give important insights into certain aspects of the biology of castor oil seed development such as carbon flow, anabolism, and catabolism of fatty acid and the pattern of deposition of SSPs, toxins, and allergens such as ricin and 2S albumins. We also found, for the first time, some genes of SSP......, seed-storage proteins (SSPs), toxins, and allergens. Additionally, we have used off-line hydrophilic interaction chromatography (HILIC) as a step of peptide fractionation preceding the reverse-phase nanoLC coupled to a LTQ Orbitrap. We were able to identify a total of 1875 proteins, and from these 1748...

  3. 21 CFR 172.876 - Castor oil.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Castor oil. 172.876 Section 172.876 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN... Multipurpose Additives § 172.876 Castor oil. The food additive castor oil may be safely used in accordance with...

  4. Optimization of biodiesel production from castor oil.

    Science.gov (United States)

    da Silva, Nivea de Lima; Maciel, Maria Regina Wolf; Batistella, César Benedito; Maciel Filho, Rubens

    2006-01-01

    The transesterification of castor oil with ethanol in the presence of sodium ethoxide as catalyst is an exceptional option for the Brazilian biodiesel production, because the castor nut is quite available in the country. Chemically, its oil contains about 90% of ricinoleic acid that gives to the oil some beneficial characteristics such as its alcohol solubility at 30 degrees C. The transesterification variables studied in this work were reaction temperature, catalyst concentration and alcohol oil molar ratio. Through a star configuration experimental design with central points, this study shows that it is possible to achieve the same conversion of esters carrying out the transesterification reaction with a smaller alcohol quantity, and a new methodology was developed to obtain high purity biodiesel.

  5. Labelling of castor oil for myocardial study

    International Nuclear Information System (INIS)

    Hallaba, E.; Al-Suhybani, A.; Zaki, F.S.; Abdullah, M.E.

    1985-01-01

    The labelling of castor oil, hydrolyzed castor oil and oleic acid by iodine monochloride and chloramine-T was investigated. The effect of iodinating agent and concentration of castor oil on labelling yield was studied. A comparative pharmacological study with analog aliphatic acids was carried out. Castor oil labelled with iodine monochloride concentrates in heart and liver in good proportion, better than other natural fatty acids and nearly equal to analog fatty acids. Infrared study revealed that the OH group in ricinoleic acid may protect the sup(125)I added across the double bond with minor changes in biochemical properties causing better extraction by muscle of the heart. (author)

  6. Castor Oil-Based Biodegradable Polyesters.

    Science.gov (United States)

    Kunduru, Konda Reddy; Basu, Arijit; Haim Zada, Moran; Domb, Abraham J

    2015-09-14

    This Review compiles the synthesis, physical properties, and biomedical applications for the polyesters based on castor oil and ricinoleic acid. Castor oil has been known for its medicinal value since ancient times. It contains ∼90% ricinoleic acid, which enables direct chemical transformation into polyesters without interference of other fatty acids. The presence of ricinoleic acid (hydroxyl containing fatty acid) enables synthesis of various polyester/anhydrides. In addition, castor oil contains a cis-double bond that can be hydrogenated, oxidized, halogenated, and polymerized. Castor oil is obtained pure in large quantities from natural sources; it is safe and biocompatible.

  7. Synthesis of novel castor oil phosphonates

    Science.gov (United States)

    Castor oil has served as a versatile hydroxy fatty acid (HFA); its principle component, ricinoleic acid, can be isolated from castor oil and has been modified extensively for a number of applications. Additionally, phosphonates and their corresponding phosphonic acids are a functional moiety that ha...

  8. Labelling of castor oil for myocardial studies

    International Nuclear Information System (INIS)

    Hallaba, E.; Al-Suhybani, A.; Zaki, F.S.; Abdullah, M.E.

    1985-01-01

    The labelling of castor oil, hydrolysed castor oil and oleic acid was investigated by the iodine monochloride and chloramine-T methods. The effect of the iodinating agent and the concentration of castor oil on the labelling yield was studied. A comparative pharmacological study with analog aliphatic fatty acids was carried out. Castor oil labelled with iodine monochloride concentrated in the heart and liver in good proportion, better than other natural fatty acids and nearly equal to analog aliphatic fatty acids. An infra-red study showed that the OH group of the ricinoleic acid apparently protects the 125 I added on the double bond, with minor changes in biochemical properties and better uptake by the heart muscle. (author)

  9. 21 CFR 178.3280 - Castor oil, hydrogenated.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Castor oil, hydrogenated. 178.3280 Section 178.3280 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD... Certain Adjuvants and Production Aids § 178.3280 Castor oil, hydrogenated. Hydrogenated castor oil may be...

  10. 75 FR 40751 - Castor Oil, Ethoxylated, Oleate; Tolerance Exemption

    Science.gov (United States)

    2010-07-14

    ... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 180 [EPA-HQ-OPP-2010-0231; FRL-8834-4] Castor Oil... castor oil, ethoxylated, oleate (CAS Reg. No. 220037-02-5) with a minimum number average molecular weight... regulation eliminates the need to establish a maximum permissible level for residues of castor oil...

  11. Design and development of low cost polyurethane biopolymer based on castor oil and glycerol for biomedical applications.

    Science.gov (United States)

    Tan, A C W; Polo-Cambronell, B J; Provaggi, E; Ardila-Suárez, C; Ramirez-Caballero, G E; Baldovino-Medrano, V G; Kalaskar, D M

    2018-02-01

    In the current study, we present the synthesis of novel low cost bio-polyurethane compositions with variable mechanical properties based on castor oil and glycerol for biomedical applications. A detailed investigation of the physicochemical properties of the polymer was carried out by using mechanical testing, ATR-FTIR, and X-ray photoelectron spectroscopy (XPS). Polymers were also tested in short term in-vitro cell culture with human mesenchymal stem cells to evaluate their biocompatibility for potential applications as biomaterial. FTIR analysis confirmed the synthesis of castor oil and glycerol based PU polymers. FTIR also showed that the addition of glycerol as co-polyol increases crosslinking within the polymer backbone hence enhancing the bulk mechanical properties of the polymer. XPS data showed that glycerol incorporation leads to an enrichment of oxidized organic species on the surface of the polymers. Preliminary investigation into in vitro biocompatibility showed that serum protein adsorption can be controlled by varying the glycerol content with polymer backbone. An alamar blue assay looking at the metabolic activity of the cells indicated that castor oil based PU and its variants containing glycerol are non-toxic to the cells. This study opens an avenue for using low cost bio-polyurethane based on castor oil and glycerol for biomedical applications. © 2017 The Authors Biopolymers Published by Wiley Periodicals, Inc.

  12. Tough Blends of Polylactide and Castor Oil

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, Megan L.; Paxton, Jessica M.; Hillmyer, Marc A. (UMM)

    2012-10-10

    Poly(l-lactide) (PLLA) is a renewable resource polymer derived from plant sugars with several commercial applications. Broader implementation of the material is limited due to its inherent brittleness. We show that the addition of 5 wt % castor oil to PLLA significantly enhances the overall tensile toughness with minimal reductions in the modulus and no plasticization of the PLLA matrix. In addition, we used poly(ricinoleic acid)-PLLA diblock copolymers, synthesized entirely from renewable resources, as compatibilizers for the PLLA/castor oil blends. Ricinoleic acid, the majority fatty acid comprising castor oil, was polymerized through a lipase-catalyzed condensation reaction. The resulting polymers contained a hydroxyl end-group that was subsequently used to initiate the ring-opening polymerization of L-lactide. The binary PLLA/castor oil blend exhibited a tensile toughness seven times greater than neat PLLA. The addition of block copolymer allowed for control over the morphology of the blends, and even further improvement in the tensile toughness was realized - an order of magnitude larger than that of neat PLLA.

  13. Phenylpropanoid esters of lesquerella and castor oil

    Science.gov (United States)

    Lesquerella (LO) and castor oil (CO) were esterified at the secondary hydroxyl groups of their 14-hydroxyeicos-cis-11-enoic fatty acids and 12-hydroxyoctadec-cis-9-enoic fatty acids, respectively, with 4-acetoxy-3-methoxycinnamic acid (acetoxyferulic acid). The unconventional esterifications were co...

  14. Tough blends of polylactide and castor oil.

    Science.gov (United States)

    Robertson, Megan L; Paxton, Jessica M; Hillmyer, Marc A

    2011-09-01

    Poly(l-lactide) (PLLA) is a renewable resource polymer derived from plant sugars with several commercial applications. Broader implementation of the material is limited due to its inherent brittleness. We show that the addition of 5 wt % castor oil to PLLA significantly enhances the overall tensile toughness with minimal reductions in the modulus and no plasticization of the PLLA matrix. In addition, we used poly(ricinoleic acid)-PLLA diblock copolymers, synthesized entirely from renewable resources, as compatibilizers for the PLLA/castor oil blends. Ricinoleic acid, the majority fatty acid comprising castor oil, was polymerized through a lipase-catalyzed condensation reaction. The resulting polymers contained a hydroxyl end-group that was subsequently used to initiate the ring-opening polymerization of l-lactide. The binary PLLA/castor oil blend exhibited a tensile toughness seven times greater than neat PLLA. The addition of block copolymer allowed for control over the morphology of the blends, and even further improvement in the tensile toughness was realized-an order of magnitude larger than that of neat PLLA.

  15. Evaluation of Castor Oil Cake Starch and Recovered Glycerol and Development of "Green" Composites Based on Those with Plant Fibers.

    Science.gov (United States)

    Guimarães, José Luis; Trindade Cursino, Ana Cristina; Ketzer Saul, Cyro; Sierrakowski, Maria Rita; Ramos, Luiz Pereira; Satyanarayana, Kestur Gundappa

    2016-01-27

    Continuous efforts are being made in some countries for the recovery of crude glycerin (RG/CG) and castor oil cake (COC), the two byproducts of biodiesel production. These are expected to help, not only in addressing environmental safety, but also in adding value to those byproducts, which otherwise may go to waste. Finding ways to utilize those byproducts underlines the main objective of this study. This paper presents the evaluation of (i) COC, glycerin and banana and sugarcane fibers for moisture content; (ii) COC for structural and thermal properties; and (iii) CG for its chemical characteristics. The possibility of using COC and CG with the selected fibers as reinforcement in the development of bio-composites is attempted through thermo-molding. Results revealed enhanced mechanical properties for these composites. The obtained results are discussed in terms of the observed morphology.

  16. Castor oil and mineral oil nanoemulsion: development and compatibility with a soft contact lens.

    Science.gov (United States)

    Katzer, Tatiele; Chaves, Paula; Bernardi, Andressa; Pohlmann, Adriana R; Guterres, Silvia S; Beck, Ruy C R

    2014-03-01

    The non-invasive ophthalmic therapy has a drawback: low residence time in the eye socket. Nanoparticles and contact lenses have been studied as promising ocular drug delivery systems. To develop a nanoemulsion and evaluate its compatibility with a soft contact lens as a potential strategy for ocular delivery. The formulations were developed by spontaneous emulsification and fully characterized. Two drops of nanoemulsion were instilled on the surface of a commercial contact lens and its transparency was measured using a UV-Vis spectrophotometer. Before and after the instillation of the drops, the morphology (scanning electron microscopy - SEM) and ion permeability of the lenses were analyzed. The formulations had a mean particle size of 234 nm, polydispersity below 0.16, zeta potential of -8.56 ± 3.49 mV, slightly acid pH, viscosity ≈1.2 mPa s(-1) and spherical-shaped particles. Nanoemulsion was non-irritant (hen's egg test-chorioallantoic membrane), which was confirmed by the cytotoxicity studies in the SIRC cell cultures. After instillation, SEM analysis showed nanodroplets inside and on the surface of the lenses, although their transparency remained near 100%. No significant differences were found between lens ion permeability coefficients before and after instillation. Formulations presented appropriate physicochemical characteristics and suitability for ocular application. The contact lens remained transparent and ion-permeable after association with the formulation.

  17. Production of Detergent from Castor Oil

    OpenAIRE

    Abubakar Garba ISAH

    2006-01-01

    This research work was carried out with the objective of extraction of oil from castor seeds and its utilization to produce a synthetic detergent. Solvent extraction method was employed in extracting the oil and the total percent oil yield was found to be 23.8%. The experimentally determined saponification value of the oil was 183.7275mgKOH/g of oil. The detergent efficiency, determined as a measure of the foamability of the detergent was found to be 2.6cm. The pH tests revealed mildly basic ...

  18. Synthesis of branched naphthoquinones from castor oil

    Directory of Open Access Journals (Sweden)

    Adriano Olímpio da Silva

    2012-06-01

    Full Text Available The naphthoquinones are cyclic aromatic α,β-dienonas with a basic framework derived from naphthalene. They are also found in many higher plants, algae, fungi and as the product of the  metabolism  of some  bacteria  having large biologica activity described in the literature such as antibacterial, anti-inflammatory, antitumor, anticancer and trypanocidal [1-3]. Castor oil is an abundant raw material in Brazil of great versatility and, it is present in biodiesel production, surfactants, cosmetics and others. Considering the importance of naphthoquinones and, the availability of the ricinoleic acid from castor oil, the aim of this study was the preparation of new branched naphthoquinones in order to test their trypanocidal activity. Castor oil was submitted to saponification with sodium hydroxide, ethanol and water under reflux for 6 h. We then carried out an acid hydrolysis with hydrochloric acid and the formed ricinoleic acid was extracted with ethyl acetate. Following, through Kochi-Anderson addition reaction it was performed the alkylation of a naphthoquinone 1 and 2, using ammonium persulfate, silver nitrate, acetonitrile and water, under heating at 70-80 ° C during 3 h, to give the branched naphthoquinones 4 and 5 (scheme 1. The naphthoquinone 3 will be similarly submitted to this procedure. The naphthoquinones 4 and 5 were purified by column chromatography on sílica gel using hexane as the eluent. The compounds were characterized by mass spectrometry and 1H and 13CNMR spectroscopy.

  19. Production of Detergent from Castor Oil

    Directory of Open Access Journals (Sweden)

    Abubakar Garba ISAH

    2006-07-01

    Full Text Available This research work was carried out with the objective of extraction of oil from castor seeds and its utilization to produce a synthetic detergent. Solvent extraction method was employed in extracting the oil and the total percent oil yield was found to be 23.8%. The experimentally determined saponification value of the oil was 183.7275mgKOH/g of oil. The detergent efficiency, determined as a measure of the foamability of the detergent was found to be 2.6cm. The pH tests revealed mildly basic properties. The color, scent and efficiency of the detergent were improved with the addition of bleaching agent, perfume and foaming agents respectively.

  20. Synthesis and characterization of castor oil based polyurethane ...

    Indian Academy of Sciences (India)

    Unknown

    Abstract. A series of interpenetrating polymer networks (IPNs) of castor oil based polyurethane/polyacrylo- nitrile (PU/PAN: 80/20, 60/40, 50/50, 40/60 and 20/80) were synthesized by condensation reaction of castor oil with methylene diisocyanate and acrylonitrile, employing benzoyl peroxide (BPO) and ethylene glycol ...

  1. Novel alpha-hydroxy phosphonic acids via castor oil

    Science.gov (United States)

    Hydroxy fatty acids (HFAs) have found a number of uses in today’s market, with uses ranging from materials to pharmaceuticals. Castor oil has served as a versatile HFA; its principle component, ricinoleic acid, can be isolated from castor oil and has been modified extensively for a number of applica...

  2. Synthesis and characterization of castor oil-based polyurethane

    Indian Academy of Sciences (India)

    Polyurethane (PU) based on polyol, derived from castor oil has been synthesized and characterized for potential use as a base material for electrolytes. Transesterification process of castor oil formed a polyol with hydroxyl value of 190 mg KOH g–1 and molecular weight of 2786 g mol–1. The polyols together with 4 ...

  3. Some properties of castor oil affecting its performance as a capacitor impregnant and their significance to future impregnant research

    International Nuclear Information System (INIS)

    Boicourt, G.P.

    1975-01-01

    For a considerable time castor oil and polychlorinated biphenyl (PCB) have been the principal impregnants used in energy-storage capacitors. Castor oil has proven to be better than PCB for pulsed applications. PCB's have come under attack as an environmental hazard, while castor oil is a vegetable product and its supply and quality are subject to fluctuation. These two facts make the development of new impregnants desirable. The properties of PCB as a capacitor impregnant are well known. This paper first compares a number of properties of castor oil and PCB's. A comparison is made between the lives of castor oil capacitors and comparable PCB energy-storage capacitors. Some of the physical and chemical properties of castor oil which make it a good pulse capacitor impregnant are examined. These properties can be used as a guide for future research on new pulse capacitor impregnants

  4. EVALUATION OF THE LIPOLYTIC ACTIVITY OF FUNGUS ON CASTOR OIL (Ricinuscommunis)

    OpenAIRE

    Mendoza C., L.; Lino N., M.; León Q., J.; Santiago C., J.

    2014-01-01

    The present study aims to select fungal strains having improved lipolytic activity in castor oil and see if its crude enzyme obtained by fermentation in liquid substrate (FSL) has the same activity on castor oil. Nine strains were isolated from fungi, Penicillium sp eight and one Aspergillus sp from waste vegetable oils. The results show that all studied strains of degradation halos developed, however, in no case was the halos of crude enzymatic degradation. The work showed that the strains o...

  5. Sorption of oil in the polyurethane from oil or castor oil; Sorcao de oleo no poliuretano derivado do petroleo ou do oleo de mamona

    Energy Technology Data Exchange (ETDEWEB)

    Florentino, Wagner M; Goulart, Shane A.S.; Mulinari, Daniella R. [Centro Universitario de Volta Redonda (UniFOA), Volta Redonda, RJ (Brazil)], e-mail: wagner-can@hotmail.com

    2011-07-01

    The oil outpouring has caused serious environmental problems. To minimize this damage polyurethane foams have been used. In this work, the use of polyurethane from oil and castor oil, in different polyol/diisocyanate mass ratios, to absorb oil was evaluated. Results revealed that the proportion of polyol and diisocyanate influenced in the sorption capacity and the polyurethane from castor oil presented greater sorption capacity. Of this way, can say that the polyurethane from oil can be replaced by castor oil, contributing to sustainable development. (author)

  6. Castor Oil Transesterification Catalysed by Liquid Enzymes

    DEFF Research Database (Denmark)

    Andrade, Thalles; Errico, Massimiliano; Christensen, Knud Villy

    2017-01-01

    In the present work, biodiesel production by reaction of non-edible castor oil with methanol under enzymatic catalysis is investigated. Two liquid enzymes were tested: Eversa Transform and Resinase HT. Reactions were performed at 35 °C and with a molar ratio of methanol to oil of 6:1. The reaction...... time was 8 hours. Stepwise addition of methanol was necessary to avoid enzyme inhibition by methanol. In order to minimize the enzyme costs, the influence of enzyme activity loss during reuse of both enzymes was evaluated under two distinct conditions. In the former, the enzymes were recovered...... and fully reused; in the latter, a mixture of 50 % reused and 50 % fresh enzymes was tested. In the case of total reuse after three cycles, both enzymes achieved only low conversions. The biodiesel content in the oil-phase using Eversa Transform was 94.21 % for the first cycle, 68.39 % in the second, and 33...

  7. Effect of powdered castor oil seed ( Ricinus communis L.) on some ...

    African Journals Online (AJOL)

    Effect of powdered castor oil seed ( Ricinus communis L.) on some internal organs of ... distribution tables, mean, mode and percentages were used for the analysis. ... development agencies and provision of training by relevant stakeholders to ...

  8. Low-modulus PMMA bone cement modified with castor oil.

    Science.gov (United States)

    López, Alejandro; Hoess, Andreas; Thersleff, Thomas; Ott, Marjam; Engqvist, Håkan; Persson, Cecilia

    2011-01-01

    Some of the current clinical and biomechanical data suggest that vertebroplasty causes the development of adjacent vertebral fractures shortly after augmentation. These findings have been attributed to high injection volumes as well as high Young's moduli of PMMA bone cements compared to that of the osteoporotic cancellous bone. The aim of this study was to evaluate the use of castor oil as a plasticizer for PMMA bone cements. The Young's modulus, yield strength, maximum polymerization temperature, doughing time, setting time and the complex viscosity curves during curing, were determined. The cytotoxicity of the materials extracts was assessed on cells of an osteoblast-like cell line. The addition of up to 12 wt% castor oil decreased yield strength from 88 to 15 MPa, Young's modulus from 1500 to 446 MPa and maximum polymerization temperature from 41.3 to 25.6°C, without affecting the setting time. However, castor oil seemed to interfere with the polymerization reaction, giving a negative effect on cell viability in a worst-case scenario.

  9. Castor Oil Based Polyurethanes: Synthesis and Characterization

    Science.gov (United States)

    Macalino, AD; Salen, VA; Reyes, LQ

    2017-09-01

    In this study, polyurethanes based on castor oil and 1,6-hexamethylene diisocyanate (HMDI) were synthesized with varying weight ratio of the castor oil and HMDI. The formation of urethane linkages was verified through the use of a fourier transform infrared spectroscopy (FTIR). The hydrophilicity of the films was evaluated through the use of a contact angle meter and it was found that the contact angle of all the films were below 90 degrees which confirms their hydrophilicity. The thermal stability of the PU films were studies through the use of a thermal gravimetric analyzer and found that all of the polyurethane films exhibited two weight loss events at elevated temperatures wherein the first weight loss event was observed to occur at 285°C to 384°C while the second weight loss event was observed at around 521°C to 551°C. The hardness, elastic modulus, and tensile elongation of the PU films were determined by using a universal testing machine (UTM) where it was found out that the hardness and the elastic modulus of the film is directly proportional with HMDI loading while the tensile elongation is inversely proportional to it. Lastly, it was known through the swelling studies of the PU films that it does not swell, this is due to the presence of unreacted triglycerides in the material, which prevents water from permeating to the films.

  10. Biodegradation of polyurethane derived from castor oil

    Directory of Open Access Journals (Sweden)

    José M. Cangemi

    2008-09-01

    Full Text Available The aim of this research was to study the biodegradation of a polymer derived from castor oil, which is a renewable, natural material that is a practical alternative for the replacement of traditional polyurethane foams. Due to its molecular structure, which contains polyester segments derived from vegetable oil, the polymeric surface is susceptible to microorganism attack. This study tested the biological degrading agent that was in contact with the microorganisms resulting from microbiological grease degrading agents, when foam was inoculated. Solid-media agar-plate tests were conducted for their potential to evaluate the biodegradation of polymeric particles by specific strains of microorganisms during 216 hours. The growth rate was defined. This technique provides a way of distinguishing the degradation abilities of microorganisms from the degradability of materials.

  11. Biodiesel production from castor oil in Brazil: A difficult reality

    International Nuclear Information System (INIS)

    Silva Cesar, Aldara da; Otavio Batalha, Mario

    2010-01-01

    The Brazilian National Program for Production and Use of Biodiesel (PNPB in Portuguese) has created a huge demand for biodiesel in Brazil. The PNPB is strongly based on social development through the inclusion of family farmers in projects integrated with biodiesel power plants. Among the various oilseeds, castor bean (Ricinus communis L.) was identified as the ideal one to promote social development in the semi-arid region. However, although promising, the mechanisms of the federal program are still insufficient to promote the effective participation of family farmers. This research shows that companies are facing huge problems in implementing contracts with family farmers. It describes and analyzes the functioning dynamics of this agro-production chain. This paper addresses the identification and the discussion of these obstacles, in order to increase the competitiveness of the biodiesel agribusiness chain, based on castor oil social projects in Brazil.

  12. Mixed Field Modification of Thermally Cured Castor Oil Based Polyurethanes

    International Nuclear Information System (INIS)

    Mortley, A.

    2006-01-01

    Thermally cured polyurethanes were prepared from castor oil and hexamethylene diisocyanatee (HMDI). Due to the long aliphatic chain of the castor oil component of polyurethane, thermal curing of castor oil based polyurethane (COPU) is limited by increasing polymer viscosity. To enhance further crosslinking, COPUs were subjected to a range of accumulated doses (0.0-3.0 MGy) produced by the mixed ionizing field of the SLOWPOKE-2 research reactor. The physico-mechanical properties of COPU, unirradiated and irradiated, were characterized by mechanical tests. Increased bond formation resulting from radiation-induced crosslinking was confirmed by favorable increases in mechanical properties and by solid-state 13 C -NMR and FTIR spectra

  13. Castor oil for induction of labour: a retrospective study.

    Science.gov (United States)

    Neri, Isabella; Dante, Giulia; Pignatti, Lucrezia; Salvioli, Chiara; Facchinetti, Fabio

    2018-08-01

    The aim of this study is to investigate the safety and efficacy of castor oil to induce labour. A retrospective observational case control study was conducted over five years. Castor oil was proposed to women referred to the Birth Centre (Castor Oil group (COG)). They were compared to women who chose to be followed by the traditional doctor-led unit (control group (CG)). Castor oil was administered in a 60 ml single dose in 200 ml of warm water. Inclusion criteria were gestational age between 40 and 41 weeks plus premature rupture of membranes between 12 and 18 hours or amniotic fluid index ≤4 or Bishop Score of ≤4 or absence of spontaneous labour over 41 + 4 weeks. Pharmacological induction of labour was required for 18 women in the COG (45%) and 36 in the CG (90%) (p oil showed a higher incidence of vaginal delivery, whereas the incidence of caesarean section was lower in the COG, but no statistical significance was reached. The use of castor oil is related to a higher probability of labour initiation within 24 hours. Castor oil can be considered a safe non-pharmacological method for labour induction.

  14. Castor oil, bath and/or enema for cervical priming and induction of labour.

    Science.gov (United States)

    Kelly, Anthony J; Kavanagh, Josephine; Thomas, Jane

    2013-07-24

    Castor oil, a potent cathartic, is derived from the bean of the castor plant. Anecdotal reports, which date back to ancient Egypt have suggested the use of castor oil to stimulate labour. Castor oil has been widely used as a traditional method of initiating labour in midwifery practice. Its role in the initiation of labour is poorly understood and data examining its efficacy within a clinical trial are limited. This is one of a series of reviews of methods of cervical ripening and labour induction using standardised methodology. To determine the effects of castor oil or enemas for third trimester cervical ripening or induction of labour in comparison with other methods of cervical ripening or induction of labour. We searched the Cochrane Pregnancy and Childbirth Group's Trials Register (30 April 2013) and bibliographies of relevant papers. Clinical trials comparing castor oil, bath or enemas used for third trimester cervical ripening or labour induction with placebo/no treatment or other methods listed above it on a predefined list of labour induction methods. A strategy was developed to deal with the large volume and complexity of trial data relating to labour induction. This involved a two-stage method of data extraction. Three trials, involving 233 women, are included. There was no evidence of differences in caesarean section rates between the two interventions in the two trials reporting this outcome (risk ratio (RR) 2.04, 95% confidence interval (CI) 0.92 to 4.55). There were no data presented on neonatal or maternal mortality or morbidity.There was no evidence of a difference between castor oil and placebo/no treatment for the rate of instrumental delivery, meconium-stained liquor, or Apgar score less than seven at five minutes. The number of participants was too small to detect all but large differences in outcome. All women who ingested castor oil felt nauseous (RR 59.92, 95% CI 8.46 to 424.52). The three trials included in the review contain small numbers

  15. Heterogeneous catalysis afford biodiesel of babassu, castor oil and blends

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Lee M.G. de; Abreu, Wiury C. de; Silva, Maria das Gracas de O. e; Matos, Jose Milton E. de; Moura, Carla V.R. de; Moura, Edmilson M. de, E-mail: mmoura@ufpi.edu.br [Universidade Federal do Piaui (UFPI), Teresina, PI (Brazil). Departamento de Quimica; Lima, Jose Renato de O.; Oliveira, Jose Eduardo de [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP/IQ/CEMPEQC), Araraquara, SP (Brazil). Instituto de Quimica. Centro de Monitoramento e Pesquisa da Qualidade de Combustiveis, Biocombustiveis, Petroleo e Derivados

    2013-04-15

    This work describes the preparation of babassu, castor oil biodiesel and mixtures in various proportions of these oils, using alkaline compounds of strontium (SrCO{sub 3} + SrO + Sr (OH){sub 2}) as heterogeneous catalysts. The mixture of oils of these oleaginous sources was used in the production of biodiesel with quality parameters that meet current legislation. The catalyst was characterized by X-ray diffractometry (XDR), physisorption of gas (BET method), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and Fourier transform infrared spectroscopy (FTIR). The viscometric technique was used to monitor the optimization.The transesterification reactions performed using strontium compounds reached conversion rates of 97.2% babassu biodiesel (BB), 96.4% castor oil biodiesel (COB) and 95.3% Babassu/Castor Oil Biodiesel 4:1 (BBCO41). (author)

  16. Heterogeneous catalysis afford biodiesel of babassu, castor oil and blends

    International Nuclear Information System (INIS)

    Carvalho, Lee M.G. de; Abreu, Wiury C. de; Silva, Maria das Gracas de O. e; Matos, Jose Milton E. de; Moura, Carla V.R. de; Moura, Edmilson M. de; Lima, Jose Renato de O.; Oliveira, Jose Eduardo de

    2013-01-01

    This work describes the preparation of babassu, castor oil biodiesel and mixtures in various proportions of these oils, using alkaline compounds of strontium (SrCO 3 + SrO + Sr (OH) 2 ) as heterogeneous catalysts. The mixture of oils of these oleaginous sources was used in the production of biodiesel with quality parameters that meet current legislation. The catalyst was characterized by X-ray diffractometry (XDR), physisorption of gas (BET method), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and Fourier transform infrared spectroscopy (FTIR). The viscometric technique was used to monitor the optimization.The transesterification reactions performed using strontium compounds reached conversion rates of 97.2% babassu biodiesel (BB), 96.4% castor oil biodiesel (COB) and 95.3% Babassu/Castor Oil Biodiesel 4:1 (BBCO41). (author)

  17. Castor oil for induction of labour: not harmful, not helpful.

    Science.gov (United States)

    Boel, Machteld Elisabeth; Lee, Sue Jean; Rijken, Marcus Johannes; Paw, Moo Koo; Pimanpanarak, Mupawjay; Tan, Saw Oo; Singhasivanon, Pratap; Nosten, François; McGready, Rose

    2009-10-01

    Castor oil is one of the most popular drugs for induction of labour in a non-medical setting; however, published data on safety and effectiveness of this compound to induce labour remain sparse. To assess the safety and effectiveness of castor oil for induction of labour in pregnancies with an ultrasound estimated gestational at birth of more than 40 weeks. Data were extracted from hospital-based records of all pregnant women who attended antenatal clinics on the Thai-Burmese border and who were more than 40 weeks pregnant. The effectiveness of castor oil to induce labour was expressed as time to birth and analysed with a Cox proportional hazards regression model. Measures associated with safety were fetal distress, meconium-stained amniotic fluid, tachysystole of the uterus, uterine rupture, abnormal maternal blood pressure during labour, Apgar scores, neonatal resuscitation, stillbirth, post-partum haemorrhage, severe diarrhoea and maternal death. Proportions were compared using Fisher's exact test. Of 612 women with a gestation of more than 40 weeks, 205 received castor oil for induction and 407 did not. The time to birth was not significantly different between the two groups (hazard ratio 0.99 (95% confidence interval: 0.81 to 1.20; n = 509)). Castor oil use was not associated with any harmful effects on the mother or fetus. Castor oil for induction of labour had no effect on time to birth nor were there any harmful effects observed in this large series. Our findings leave no justification for recommending castor oil for this purpose.

  18. Pengaruh Konsentrasi Minyak Kelapa Murni (Virgin Coconut Oil dan Minyak Jarak (Castor Oil terhadap Sifat Fisikokimia dan Organoleptik Sabun Mandi Cair

    Directory of Open Access Journals (Sweden)

    Asri Widyasanti

    2017-04-01

    Full Text Available VCO contains of lauric acid that perform to smooth and to moisturize the skin. Castor oil has ricinoleic acid that serves to protect the skin. Therefore, both of the oil are suitable to be the raw material for liquid soap making. This study aimed were to produce a liquid soap, to determine the exact concentration of VCO and castor oil for liquid soap and to find out the effect of VCO and Castor Oil concentrations to the characteristics of liquid soap. The method used was laboratory experimental method with descriptive analysis. The treatments in this study were A =concentrations of VCO 100 %, B = concentrations of VCO 80 % and castor oil 20 %, C = concentrations of VCO 50 % and castor oil 50 %, D = concentrations of VCO 20 % and castor oil 80 %, and E = concentrations of castor oil 100 %,  from 200 gram soap base. The parameter observed for liquid soap included chemical properties, physical properties of soap, and organoleptic test. The result shows that all treatments complies the requirement SNI 06-4085-1996. The formula of liquid soap with treatment B was revealed as the best product with 0.01 % of total alkali content, pH value of 9.16 , specific gravity 1.06, and total plate count 5colonies/g. This technology process of natural liquid soap production with the VCO and castor oil could be develop and apply in industrial scale.

  19. Castor oil biodiesel as an alternative fuel for diesel engines

    International Nuclear Information System (INIS)

    Benavides, Alirio; Benjumea, Pedro; Pashova, Veselina

    2007-01-01

    In this paper, a study related to the production and use of castor oil biodiesel is presented. The maximum methyl esters yield of the castor oil transesterification reaction is obtained under the following conditions: ambient temperature, a molar ratio of methanol to vegetable oil equal to 9 and a catalyst percentage equal to 0.8%. The castor oil biodiesel can be blended with petroleum diesel as far as 15% in such way that the resulting blend complies with national and international technical standards for diesel fuels. Its high viscosity becomes the main difficulty for using castor oil biodiesel in engines. However this biofuel exhibits excellent cold flow properties (low values of cloud and pour points). The motor tests using castor oil biodiesel petroleum diesel blends, for the biodiesel proportion tested; show that a biodiesel percentage increase leads to an increase in the specific fuel consumption, a decrease in the fuel air ratio, a slight decrease in smoke opacity, while the fuel conversion efficiency and the CO and CO 2 emissions practically remain constants

  20. Castor oil induces laxation and uterus contraction via ricinoleic acid activating prostaglandin EP3 receptors

    OpenAIRE

    Tunaru, Sorin; Althoff, Till F.; Nüsing, Rolf M.; Diener, Martin; Offermanns, Stefan

    2012-01-01

    Castor oil is one of the oldest drugs. When given orally, it has a laxative effect and induces labor in pregnant females. The effects of castor oil are mediated by ricinoleic acid, a hydroxylated fatty acid released from castor oil by intestinal lipases. Despite the wide-spread use of castor oil in conventional and folk medicine, the molecular mechanism by which ricinoleic acid acts remains unknown. Here we show that the EP3 prostanoid receptor is specifically activated by ricinoleic acid and...

  1. Example of industrial valorisation of derivative products of Castor oil

    Directory of Open Access Journals (Sweden)

    Borg Patrick

    2009-07-01

    Full Text Available Known since antiquity, Castor Oil has been first used in medicine. Now, even if it remains present in small quantities as an excipient in many pharmaceutical specialties, it finds a lot of applicationsin cosmetics, industrial applications and chemical industry. Castor Oil specificity comes from its high content of ricinoleic acid (up to 85% that combines a double bond and an hydroxyl function in the heart of a 18 carbons linear chain. This particular structure is the key of an unique chemistry developed by ARKEMA that gives by thermal cracking a wide range of compounds with either 7 or 11 carbon atoms. A whole range of innovative chemistries and end use products are generated from these base reaction products. They are used in every-day life, to improve our comfort and safety but also in very specific applications with very high technical requirements. Synthesized from undecylenic acid, 11-amino-undecanoic acid, 100% based on renewable resources, is the precursor to biobased polymers combining high performance and sustainability: Rilsan®, Rilsan Fine Powder®, Pebax Rnew®.

  2. Growth response of Ricinus communis L (castor oil) in spent ...

    African Journals Online (AJOL)

    The growth response of castor oil plant, Ricinus communis, in spent lubricating oil (SLO) was investigated using 1-6% w/w SLO and a control. The result showed that highest percent germination of approximately 92, was obtained in control and the least in 5% w/w. The early germination obtained in this study was significant ...

  3. Extraction, Characterization and Modification of Castor Seed Oil

    Directory of Open Access Journals (Sweden)

    A. D. MOHAMMED

    2006-01-01

    Full Text Available This paper carried out experimental study, through extraction and characterization of both crude and refined castor oil. Normal hexane was used as solvent for the extraction process. The oil produced was refined through degumming, neutralization and bleaching process using local adsorbent (activated clay. The characterization analysis revealed that tested parameters, which include specific gravity, refractive index, acid value, saponification value and iodine value for both crude and refined castor oil produced, were within the ASTM standard specifications. In fact the iodine value obtained (84.8 for the refined oil indicates that the oil could certainly be used as lubricant, hydraulic break fluid and protecting coatings. The oil was modified via sulphation method to produce Turkey – red oil that was tested on wooden material, paper and cloth. The test revealed that the Turkey – red oil produced is suitable to be used as a good dying agent and polish.

  4. Evaluation of Castor Oil Cake Starch and Recovered Glycerol and Development of “Green” Composites Based on Those with Plant Fibers

    Science.gov (United States)

    Guimarães, José Luis; Trindade Cursino, Ana Cristina; Ketzer Saul, Cyro; Sierrakowski, Maria Rita; Ramos, Luiz Pereira; Satyanarayana, Kestur Gundappa

    2016-01-01

    Continuous efforts are being made in some countries for the recovery of crude glycerin (RG/CG) and castor oil cake (COC), the two byproducts of biodiesel production. These are expected to help, not only in addressing environmental safety, but also in adding value to those byproducts, which otherwise may go to waste. Finding ways to utilize those byproducts underlines the main objective of this study. This paper presents the evaluation of (i) COC, glycerin and banana and sugarcane fibers for moisture content; (ii) COC for structural and thermal properties; and (iii) CG for its chemical characteristics. The possibility of using COC and CG with the selected fibers as reinforcement in the development of bio-composites is attempted through thermo-molding. Results revealed enhanced mechanical properties for these composites. The obtained results are discussed in terms of the observed morphology. PMID:28787878

  5. Mixed field radiation modification of polyurethanes based on castor oil

    International Nuclear Information System (INIS)

    Mortley, A.; Bonin, H.W.; Bui, V.T.

    2006-01-01

    Polyurethane is among the polymers and polymer-based composite materials being investigated at the Royal Military College of Canada for the fabrication of leak-tight containers for the long-term disposal of radioactive waste. Due to the long aliphatic chain of the castor oil component of polyurethane, thermal curing of castor oil based polyurethane (COPU) is limited by increasing polymer viscosity. To enhance further crosslinking, COPUs were subjected to a range of doses (0.0 - 3.0 MGy) produced by the mixed ionizing radiation field of a SLOWPOKE-2 research nuclear reactor. The tensile mechanical properties of castor oil based polyurethanes (COPU), unirradiated and irradiated, were characterized by mechanical tensile tests. Increases in mechanical strength due to radiation-induced crosslinking and limitations of thermal curing were confirmed by tensile tests and changing 13 C-NMR and FTIR spectra. (author)

  6. Mixed field radiation modification of polyurethanes based on castor oil

    Energy Technology Data Exchange (ETDEWEB)

    Mortley, A.; Bonin, H.W.; Bui, V.T. [Royal Military College of Canada, Dept. of Chemistry and Chemical Engineering, Kingston, Ontario (Canada)]. E-mail: aba.mortley@rmc.ca

    2006-07-01

    Polyurethane is among the polymers and polymer-based composite materials being investigated at the Royal Military College of Canada for the fabrication of leak-tight containers for the long-term disposal of radioactive waste. Due to the long aliphatic chain of the castor oil component of polyurethane, thermal curing of castor oil based polyurethane (COPU) is limited by increasing polymer viscosity. To enhance further crosslinking, COPUs were subjected to a range of doses (0.0 - 3.0 MGy) produced by the mixed ionizing radiation field of a SLOWPOKE-2 research nuclear reactor. The tensile mechanical properties of castor oil based polyurethanes (COPU), unirradiated and irradiated, were characterized by mechanical tensile tests. Increases in mechanical strength due to radiation-induced crosslinking and limitations of thermal curing were confirmed by tensile tests and changing {sup 13}C-NMR and FTIR spectra. (author)

  7. Castor Oil: Properties, Uses, and Optimization of Processing Parameters in Commercial Production.

    Science.gov (United States)

    Patel, Vinay R; Dumancas, Gerard G; Kasi Viswanath, Lakshmi C; Maples, Randall; Subong, Bryan John J

    2016-01-01

    Castor oil, produced from castor beans, has long been considered to be of important commercial value primarily for the manufacturing of soaps, lubricants, and coatings, among others. Global castor oil production is concentrated primarily in a small geographic region of Gujarat in Western India. This region is favorable due to its labor-intensive cultivation method and subtropical climate conditions. Entrepreneurs and castor processors in the United States and South America also cultivate castor beans but are faced with the challenge of achieving high castor oil production efficiency, as well as obtaining the desired oil quality. In this manuscript, we provide a detailed analysis of novel processing methods involved in castor oil production. We discuss novel processing methods by explaining specific processing parameters involved in castor oil production.

  8. Regulatory Phosphorylation of Bacterial-Type PEP Carboxylase by the Ca2+-Dependent Protein Kinase RcCDPK1 in Developing Castor Oil Seeds.

    Science.gov (United States)

    Ying, Sheng; Hill, Allyson T; Pyc, Michal; Anderson, Erin M; Snedden, Wayne A; Mullen, Robert T; She, Yi-Min; Plaxton, William C

    2017-06-01

    Phosphoenolpyruvate carboxylase (PEPC) is a tightly controlled cytosolic enzyme situated at a crucial branch point of central plant metabolism. In developing castor oil seeds ( Ricinus communis ) a novel, allosterically desensitized 910-kD Class-2 PEPC hetero-octameric complex, arises from a tight interaction between 107-kD plant-type PEPC and 118-kD bacterial-type (BTPC) subunits. The native Ca 2+ -dependent protein kinase (CDPK) responsible for in vivo inhibitory phosphorylation of Class-2 PEPC's BTPC subunit's at Ser-451 was highly purified from COS and identified as RcCDPK1 (XP_002526815) by mass spectrometry. Heterologously expressed RcCDPK1 catalyzed Ca 2+ -dependent, inhibitory phosphorylation of BTPC at Ser-451 while exhibiting: ( i ) a pair of Ca 2+ binding sites with identical dissociation constants of 5.03 μM, ( ii ) a Ca 2+ -dependent electrophoretic mobility shift, and ( iii ) a marked Ca 2+ -independent hydrophobicity. Pull-down experiments established the Ca 2+ -dependent interaction of N-terminal GST-tagged RcCDPK1 with BTPC. RcCDPK1-Cherry localized to the cytosol and nucleus of tobacco bright yellow-2 cells, but colocalized with mitochondrial-surface associated BTPC-enhanced yellow fluorescent protein when both fusion proteins were coexpressed. Deletion analyses demonstrated that although its N-terminal variable domain plays an essential role in optimizing Ca 2+ -dependent RcCDPK1 autophosphorylation and BTPC transphosphorylation activity, it is not critical for in vitro or in vivo target recognition. Arabidopsis ( Arabidopsis thaliana ) CPK4 and soybean ( Glycine max ) CDPKβ are RcCDPK1 orthologs that effectively phosphorylated castor BTPC at Ser-451. Overall, the results highlight a potential link between cytosolic Ca 2+ signaling and the posttranslational control of respiratory CO 2 refixation and anaplerotic photosynthate partitioning in support of storage oil and protein biosynthesis in developing COS. © 2017 American Society of Plant

  9. Regulatory Phosphorylation of Bacterial-Type PEP Carboxylase by the Ca2+-Dependent Protein Kinase RcCDPK1 in Developing Castor Oil Seeds1[OPEN

    Science.gov (United States)

    Hill, Allyson T.; Anderson, Erin M.; She, Yi-Min

    2017-01-01

    Phosphoenolpyruvate carboxylase (PEPC) is a tightly controlled cytosolic enzyme situated at a crucial branch point of central plant metabolism. In developing castor oil seeds (Ricinus communis) a novel, allosterically desensitized 910-kD Class-2 PEPC hetero-octameric complex, arises from a tight interaction between 107-kD plant-type PEPC and 118-kD bacterial-type (BTPC) subunits. The native Ca2+-dependent protein kinase (CDPK) responsible for in vivo inhibitory phosphorylation of Class-2 PEPC’s BTPC subunit’s at Ser-451 was highly purified from COS and identified as RcCDPK1 (XP_002526815) by mass spectrometry. Heterologously expressed RcCDPK1 catalyzed Ca2+-dependent, inhibitory phosphorylation of BTPC at Ser-451 while exhibiting: (i) a pair of Ca2+ binding sites with identical dissociation constants of 5.03 μM, (ii) a Ca2+-dependent electrophoretic mobility shift, and (iii) a marked Ca2+-independent hydrophobicity. Pull-down experiments established the Ca2+-dependent interaction of N-terminal GST-tagged RcCDPK1 with BTPC. RcCDPK1-Cherry localized to the cytosol and nucleus of tobacco bright yellow-2 cells, but colocalized with mitochondrial-surface associated BTPC-enhanced yellow fluorescent protein when both fusion proteins were coexpressed. Deletion analyses demonstrated that although its N-terminal variable domain plays an essential role in optimizing Ca2+-dependent RcCDPK1 autophosphorylation and BTPC transphosphorylation activity, it is not critical for in vitro or in vivo target recognition. Arabidopsis (Arabidopsis thaliana) CPK4 and soybean (Glycine max) CDPKβ are RcCDPK1 orthologs that effectively phosphorylated castor BTPC at Ser-451. Overall, the results highlight a potential link between cytosolic Ca2+ signaling and the posttranslational control of respiratory CO2 refixation and anaplerotic photosynthate partitioning in support of storage oil and protein biosynthesis in developing COS. PMID:28363991

  10. Laser-fabricated castor oil-capped silver nanoparticles.

    Science.gov (United States)

    Zamiri, Reza; Zakaria, Azmi; Abbastabar, Hossein; Darroudi, Majid; Husin, Mohd Shahril; Mahdi, Mohd Adzir

    2011-01-01

    Silver nanoparticles were fabricated by ablation of a pure silver plate immersed in castor oil. A Nd:YAG-pulsed Q-switch laser with 1064-nm wavelength and 10-Hz frequency was used to ablate the plate for 10 minutes. The sample was characterized by ultraviolet-visible, atomic absorption, Fourier transform-infrared spectroscopies, and transmission electron microscopy. The results of the fabricated sample showed that the nanoparticles in castor oil were about 5-nm in diameter, well dispersed, and showed stability for a long period of time.

  11. Synthesis of carbon nanotubes using natural carbon precursor: Castor oil

    Science.gov (United States)

    Raziah, A. Z.; Junizah, A. R.; Saifuddin, N.

    2012-09-01

    Castor oil has long been an article of commerce due to its versatility as it is widely used as a starting material for many industrial chemical products because of its unique structure. In this study, carbon nanotubes has been synthesized by thermal decomposition of castor oil in nitrogen atmosphere at 300-400δC using custom-made microwave processing unit. The precursor material was catalyzed by iron clusters originating from the addition of ferrocene. The morphology and characterization of the CNTs were studied and discussed by transmission electron microscopy (TEM).

  12. Experimental and numerical study of palm oil and castor oil biodiesel droplet evaporation

    OpenAIRE

    Botero, M.L; Molina, A.

    2017-01-01

    ABSTRACT: The vaporization characteristics of Palm and Castor oil biodiesel (Ricinus comunis) droplets were studied. An experimental set-up for measuring the evaporation rate of fuel droplets at atmospheric pressure and variable temperatures was developed. The droplets were suspended on a quartz fiber with initial droplet diameters ranging from 0.9 mm to 1.3 mm. The D2 law model for droplet evaporation was used to predict the evaporation rate of the fuels. Biodiesel physical properties were e...

  13. Comparative Analysis of Flame Characteristics of Castor Oil and ...

    African Journals Online (AJOL)

    The flame characteristics of castor oil based foam and that of polyether foam impregnated with inorganic flame retardants (FR) were investigated. The polyether foams were impregnated with measured concentration of Antimony trioxide and Sodium bromide, Ammonium dihydrogen orthophosphate, Diammonium hydrogen ...

  14. Evaluation of castor oil samples for potential toxin contamination

    Science.gov (United States)

    Castor oil and its derivatives are widely used as a chemical feedstock for production of lubricants and greases, and for engineering plastics, plasticizers and surfactants. They also have wide application in consumer goods such as lipstick, deodorants and medicinal products. Due to concerns about th...

  15. Composition of acylglycerols in castor oil and their biosynthetic pathway

    Science.gov (United States)

    Castor oil has many industrial uses, such as the manufacture of aviation lubricant, plastics, paints, coatings, and cosmetics, because of its high content of ricinoleate (hydroxy fatty acid). We have identified many molecular species of acylglycerols using electrospray ionization mass spectrometry o...

  16. Castor Oil: Properties, Uses, and Optimization of Processing Parameters in Commercial Production

    OpenAIRE

    Patel, Vinay R.; Dumancas, Gerard G.; Kasi Viswanath, Lakshmi C.; Maples, Randall; Subong, Bryan John J.

    2016-01-01

    Castor oil, produced from castor beans, has long been considered to be of important commercial value primarily for the manufacturing of soaps, lubricants, and coatings, among others. Global castor oil production is concentrated primarily in a small geographic region of Gujarat in Western India. This region is favorable due to its labor-intensive cultivation method and subtropical climate conditions. Entrepreneurs and castor processors in the United States and South America also cultivate cast...

  17. "Castor Oil" - The Culprit of Acute Hair Felting.

    Science.gov (United States)

    Maduri, V Ramya; Vedachalam, Ahalya; Kiruthika, S

    2017-01-01

    Acute hair felting is a rare disorder of scalp hair. In this condition, the hair becomes twisted, entangled as a hard stony mass resembling a bird's nest. Sudden hair matting has been reported earlier in the literature after vigorous use of chemical and herbal shampoos. Plica polonica is a patchy area of hair matting occurring in due course of time in neglected hair or underlying psychiatric illness. This case is interesting as the whole scalp hair matted immediately after using coconut oil and castor oil following washing. Growing long hair and taking oil bath are cultural and religious customs in South India. The high viscosity of castor oil and long hair had contributed to sudden felting of hair. This disorder of hair is irreversible and the hair should be cut off. Acute nature of this disorder will result in a serious psychological impact on the patient and the family.

  18. LDPE/PHB blends filled with castor oil cake

    Science.gov (United States)

    Burlein, Gustavo A.; Rocha, Marisa C. G.

    2015-05-01

    The response surface methodology (RSM) is a collection of mathematical techniques useful for developing, improving and optimizing process. In this study, RSM technique was applied to evaluate the effect of the components proportion on the mechanical properties of low density polyethylene (LDPE)/ poly (3-hydroxy-butyrate) (PHB) blends filled with castor oil cake (CC). The blends were prepared by melt mixing in a twin screw extruder. Low density polyethylene, poly (3-hydroxy-butyrate) and castor oil pressed cake were represented by the input variables designated as LDPE, PHB and CC, respectively. As it was desirable to consider the largest LDPE content in the ternary system, the components of the mixture were subjected to the following constraints: 0.7 ≤ LDPE ≤ 1.0, 0≤ PHB≤0.3 e 0 ≤ CC ≤0.3. The mechanical properties of the different mixtures were determined by conventional ASTM tests and were evaluated through analysis of variance performed by the Minitab software. Some polynomial equations were tested in order to describe the mechanical behavior of the samples. The quadratic model in pseudo components was selected for describing the tensile behavior because it was the most efficient from a statistical point of view (p-value ≤ 0.05; coefficient of determination (r2) close to 1 and variation inflation factor (VIF) values PHB or CC. The tensile strength values of binary mixtures of LDPE lie in the range from 8.9 to 10 MPa. As some commercial grades of LDPE have mechanical strength in this range, it may be inferred that the addition of a certain amount of PHB or CC to LDPE may be considered as a possibility for obtaining LDPE based materials with increased susceptibility to biodegradation. The cubic model in pseudo components was selected for describe the flexural strength of the samples because it was the most adequate from a statistical point of view. However, the linear model in pseudo components was the most efficient to describe the flexural modulus

  19. Preparation and research on properties of castor oil as a diesel fuel additive

    OpenAIRE

    Nurbakhit Imankulov

    2012-01-01

    The research shows an opportunity of preparing biodiesel fuel on the basis of local diesel fuel and the bioadditive - castor oil. Limiting optimum concentration of introduction of the bioadditive equal was established as 5% mass ratio. The castor oil released from seeds of Palma Christi grown on experimental field. All physical and chemical characteristics of the oil including IR-spectra were determined. Operating conditions of castor oil introduction (temperature, solubility, concentra-tion,...

  20. Identification of minor acylglycerols less polar than triricinolein in castor oil by mass spectrometry and the proposed biosynthetic pathway of castor oil

    Science.gov (United States)

    Ricinoleate (OH18:1), a monohydroxy fatty acid, has many industrial uses such as the manufacture of biodegradable plastics, nylon, plasticizers, lubricants, cosmetics and paints. Castor oil is the only commericial source of ricinoleate which occurs as triacylglycerols. Triacylglycerols in castor oil...

  1. Castor and jatropha oils: production strategies – A review

    Directory of Open Access Journals (Sweden)

    Lago Regina C.A.

    2009-07-01

    Full Text Available The Brazilian bioenergy matrix is based on four platforms: ethanol, energy forests, residues and co-products and biodiesel. The food-energy dichotomy in the use of edible oils is one factor which has stimulated the search for non-edible oleaginous energy crops, such as many native palms. By the year 2000 Brazil had an annual deficit of 80 thousand tons of castor oil, making necessary to import oil from China and India. After a strong debate the National Program on Biodiesel Production (NPBP was launched by December 2004. After an initial excessive enthusiasm, small producers being focused in the program, a more mature and realistic planning is undertaken. Production in semi arid lands is being stimulated, mainly castor (Ricinus communis and Jatropha (Jatropha curcas. Apart from belonging to the same botanical family (Euphorbiaceae, both plants are well resistant to poor soils. Castor plant is well adapted to practically the whole country, except for some extreme areas (too low water availability or too much rain. Castor keeps being an alternative for the semi arid region but much more technology is requested to make it largely exploited. Following the petroleum crisis of 1980’s an ambitious research program on Jatropha curcas was initiated, later on discontinued and presently retaken by Embrapa and some Universities. Progress is slower than in the case of Ricinus communis. The first agronomical observations confirmed low productivity, problems with pests and diseases, high harvesting costs etc. Some strategic factors should be considered for the production of castor and Jatropha oils: 1. Production of raw materials; 2. Production of oils; 3. Detoxification and value aggregation to the extraction cakes and residues. Regarding raw material production, it is necessary a strong, long term research program on genetic breeding (short cycle varieties, with high productivity and allowing a sole harvesting, soil fertility, pest control, domestication

  2. Measurement of quadratic electrogyration effect in castor oil

    Science.gov (United States)

    Izdebski, Marek; Ledzion, Rafał; Górski, Piotr

    2015-07-01

    This work presents a detailed analysis of electrogyration measurement in liquids with the usage of an optical polarimetric technique. Theoretical analysis of the optical response to an applied electric field is illustrated by experimental data for castor oil which exhibits natural optical activity, quadratic electro-optic effect and quadratic electrogyration effect. Moreover, the experimental data show that interaction of the oil with a pair of flat electrodes induces a significant dichroism and natural linear birefringence. The combination of these effects occurring at the same time complicates the procedure of measurements. It has been found that a single measurement is insufficient to separate the contribution of the electrogyration effect, but it is possible on the basis of several measurements performed with various orientations of the polarizer and the analyser. The obtained average values of the quadratic electrogyration coefficient β13 in castor oil at room temperature are from - 0.92 ×10-22 to - 1.44 ×10-22m2V-2 depending on the origin of the oil. Although this study is focused on measurements in castor oil, the presented analysis is much more general.

  3. Prolonged local anesthetic action through slow release from poly (lactic acid co castor oil).

    Science.gov (United States)

    Sokolsky-Papkov, Marina; Golovanevski, Ludmila; Domb, Abraham J; Weiniger, Carolyn F

    2009-01-01

    To evaluate a new formulation of bupivacaine loaded in an injectable fatty acid based biodegradable polymer poly(lactic acid co castor oil) in prolonging motor and sensory block when injected locally. The polyesters were synthesized from DL: -lactic acid and castor oil with feed ratio of 4:6 and 3:7 w/w. Bupivacaine was dispersed in poly(fatty ester) liquid and tested for drug release in vitro. The polymer p(DLLA:CO) 3:7 loaded with 10% bupivacaine was injected through a 22G needle close to the sciatic nerve of ICR mice and the duration of sensory and motor nerve blockade was measured. The DL: -lactic acid co castor oil p(DLLA:CO) 3:7 released 65% of the incorporated bupivacaine during 1 week in vitro. Single injection of 10% bupivacaine loaded into this polymer caused motor block that lasted 24 h and sensory block that lasted 48 h. Previously we developed a ricinoleic acid based polymer with incorporated bupivacaine which prolonged anesthesia to 30 h. The new polymer poly(lactic acid co castor oil) 3:7 provides slow release of effective doses of the incorporated local anesthetic agent and prolongs anesthesia to 48 h.

  4. The effect of oral castor oil on the disposition of methyprylon in intoxicated dogs.

    Science.gov (United States)

    Gwilt, P R; Pankaskie, M C; Mitala, J J

    1982-07-01

    Clinical observations indicate that large oral doses of castor oil are effective in reducing the time of coma resulting from acute intoxication with lipophilic drugs. It has been further suggested that the rate of removal of these drugs from the body is increased by castor oil. In order to investigate the effect of castor oil on the disposition of lipophilic drugs, five dogs were given toxic doses of methyprylon by intravenous infusion. Each dog was treated with a large oral dose of castor oil in a cross-over fashion. No significant difference was observed in the sleep times of the dogs treated with castor oil, or in the methyprylon pharmacokinetics compared to controls. It was concluded that castor oil does not affect the disposition of methyprylon.

  5. Undecylenic acid: a valuable and physiologically active renewable building block from castor oil.

    Science.gov (United States)

    Van der Steen, Marijke; Stevens, Christian V

    2009-01-01

    A lot of attention is currently being paid to the transition to a biobased economy. In this movement, most efforts concentrate on the development of bioenergy applications including bioethanol, biodiesel, thermochemical conversion of biomass, and others. However, in the energy sector other nonbiomass alternatives are known, whereas no valuable alternatives are available when thinking about chemical building blocks. Therefore, it is also essential to develop new routes for the synthesis of bio-based chemicals and materials derived thereof. Such intermediates can originate either from plants or from animals. Castor oil is a non-edible oil extracted from the seeds of the castor bean plant Ricinus communis (Euphorbiaceae), which grows in tropical and subtropical areas. Globally, around one million tons of castor seeds are produced every year, the leading producing areas being India, PR China, and Brazil.2 10-Undecenoic acid or undecylenic acid is a fatty acid derived from castor oil that, owing to its bifunctional nature, has many possibilities to develop sustainable applications.

  6. Physicochemical and sensory characteristics of milk from goats supplemented with castor or licuri oil.

    Science.gov (United States)

    Pereira, R A G; Oliveira, C J B; Medeiros, A N; Costa, R G; Bomfim, M A D; Queiroga, R C R E

    2010-02-01

    The purpose of this study was to evaluate the influence of castor and licuri palm oils supplemented to milking goats on the physical, chemical, and sensory characteristics of milk. A double Latin square experimental design (5x5) using 10 confined crossbred Moxotó-Alpine goats was performed according to the following treatments: nonsupplemented (control), 3% castor oil, 5% castor oil, 3% licuri oil, and 5% licuri oil. Oils in each treatment were supplemented in the dry matter. Castor oil supplementation reduced the fat content and increased the lactose and density of milk. Considering the sensory analysis, a lower acceptability was observed for milk from goats supplemented with castor oil. On the other hand, licuri oil supplementation led to higher acceptability scores for flavor and odor of goat milk. Copyright 2010 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  7. Trial of an experimental castor oil solution for cleaning dentures.

    Science.gov (United States)

    Andrade, Ingrid Machado de; Andrade, Kelly Machado de; Pisani, Marina Xavier; Silva-Lovato, Cláudia Helena; de Souza, Raphael Freitas; Paranhos, Helena de Freitas Oliveira

    2014-01-01

    Denture hygiene is essential because denture biofilm is involved in oral infections and systemic diseases. Although there are chemical agents available on the market, none of them have ideal properties and research on such products is still necessary. The aim of this study was to evaluate the efficacy of a castor bean (Ricinus communis)-based solution for removing denture biofilm, compared to two traditional products (sodium hypochlorite and alkaline peroxide). Fifty maxillary complete denture wearers were instructed to brush their dentures after meals and to immerse their dentures once a day in the following solutions: Saline (20 min; control), Polident alkaline peroxide (3 min), NaOCl (20 min) and 2% castor oil solution (20 min). Participants used each solution for a period of 7 consecutive days, according to a random sequence. After each period, the internal surfaces of maxillary complete dentures were stained with a disclosing solution (1% neutral red), photographed and the disclosed biofilm was quantified with the aid of specific software. The influence of treatments on results was verified by the Friedman test (α=0.05). Tested solutions presented significant difference (Fr=51.67; pcastor oil presented intermediate results (median: 1.0% and 1.5%, respectively). It can be concluded that the castor oil solution tested in this study was comparable to alkaline peroxide in terms of efficiency in denture biofilm removal.

  8. Methyl esters from vegetable oils with hydroxy fatty acids: Comparison of lesquerella and castor methyl esters

    Science.gov (United States)

    The search for alternative feedstocks for biodiesel as partial replacement for petrodiesel has recently extended to castor oil. In this work, the castor oil methyl esters were prepared and their properties determined in comparison to the methyl esters of lesquerella oil, which in turn is seen as alt...

  9. Production of Biodiesel from Mixed Waste Cooking and Castor Oil

    Directory of Open Access Journals (Sweden)

    Hadiyanto Hadiyanto

    2018-01-01

    Full Text Available Due to increasing population growth, the consumption and needs of energy increase significantly. This leads Indonesia government to search alternative energy to cover the lacks of fossil energy reserves. Biodiesel is one of the prospective alternative energy which are renewable and environmental friendly. A common problem in large-scale biodiesel production is the sustainability of feedstock and the biodiesel stability. Therefore, the purpose of this study was to evaluate the production of biodiesel from two oil sources i.e. waste cooking oil and castor oil. This study examined the effect of mixed oil ratio on yield, biodiesel characteristics and stability. The physical properties included kinematic viscosity, acid number, saponification number, iodine number and cetane number have been evaluated as function of oil ratio. Yield of biodiesel was obtained at 35.07%, 99.2% and 83.69% for jatropha:castor oil ratio of 1: 0, 1: 2 and 2: 1, respectively. Most of these characteristics showed an increase by increasing the oil ratio. The result concluded that at the ratio of 1:1(v/v was the best characteristic and stability.

  10. Biochemical and Molecular Characterization of RcSUS1, a Cytosolic Sucrose Synthase Phosphorylated in Vivo at Serine 11 in Developing Castor Oil Seeds*

    Science.gov (United States)

    Fedosejevs, Eric T.; Ying, Sheng; Park, Joonho; Anderson, Erin M.; Mullen, Robert T.; She, Yi-Min; Plaxton, William C.

    2014-01-01

    Sucrose synthase (SUS) catalyzes the UDP-dependent cleavage of sucrose into UDP-glucose and fructose and has become an important target for improving seed crops via metabolic engineering. A UDP-specific SUS homotetramer composed of 93-kDa subunits was purified to homogeneity from the triacylglyceride-rich endosperm of developing castor oil seeds (COS) and identified as RcSUS1 by mass spectrometry. RcSUS1 transcripts peaked during early development, whereas levels of SUS activity and immunoreactive 93-kDa SUS polypeptides maximized during mid-development, becoming undetectable in fully mature COS. The cytosolic location of the enzyme was established following transient expression of RcSUS1-enhanced YFP in tobacco suspension cells and fluorescence microscopy. Immunological studies using anti-phosphosite-specific antibodies revealed dynamic and high stoichiometric in vivo phosphorylation of RcSUS1 at its conserved Ser-11 residue during COS development. Incorporation of 32Pi from [γ-32P]ATP into a RcSUS1 peptide substrate, alongside a phosphosite-specific ELISA assay, established the presence of calcium-dependent RcSUS1 (Ser-11) kinase activity. Approximately 10% of RcSUS1 was associated with COS microsomal membranes and was hypophosphorylated relative to the remainder of RcSUS1 that partitioned into the soluble, cytosolic fraction. Elimination of sucrose supply caused by excision of intact pods of developing COS abolished RcSUS1 transcription while triggering the progressive dephosphorylation of RcSUS1 in planta. This did not influence the proportion of RcSUS1 associated with microsomal membranes but instead correlated with a subsequent marked decline in SUS activity and immunoreactive RcSUS1 polypeptides. Phosphorylation at Ser-11 appears to protect RcSUS1 from proteolysis, rather than influence its kinetic properties or partitioning between the soluble cytosol and microsomal membranes. PMID:25313400

  11. Mass spectrometry of the lithium adducts of diacylglycerols containing hydroxy FA in castor oil and two normal FA

    Science.gov (United States)

    Castor oil can be used in industry. The molecular species of triacylglycerols containing hydroxy fatty acids (FA) in castor oil have been identified. We report here the identification of twelve diacylglycerols (DAG) containing hydroxy FA in castor oil using positive ion electrospray ionization mass ...

  12. Synthesis and membrane performance characterization of self-emulsified waterborne nitrocellulose dispersion modified with castor oil

    Energy Technology Data Exchange (ETDEWEB)

    Su, Xiuxia; Zhao, Qingxiao, E-mail: 934481965@qq.com; Zhang, Dan; Dong, Wei

    2015-11-30

    Graphical abstract: - Highlights: • Waterborne nitrocellulose dispersion modified with castor oil (CWNC) was synthesized successfully. • It is a kind of environment-friendly coatings, in which volatile organic content (VOC) is near zero. • Castor oil used as an internal crosslinking agent for WNC improved the properties of the coating. • When the mass fraction of castor oil to total reactants is 7%, emulsion and the coating are of the best comprehensive performance. - Abstract: Waterborne nitrocellulose dispersion modified with castor oil (CWNC) was designed and successfully synthesized by self emulsification and reaction among isophorone diisocyanate (IPDI) trimer, dimethylol propionic acid (DMPA), nitrocellulose (NC) and castor oil (C.O.). The CWNC was characterized by transmission electron microscope (TEM), Fourier transform infrared (FTIR) spectroscopy and thermal gravimetric analysis (TGA), etc. The particle size of CWNC increased with the increase of mass fraction of castor oil to total reactants, ω (C.O.). The morphology of particles is an approximate core–shell structure indicated by TEM. FTIR confirmed that the reactions (i.e. IPDI trimer and castor oil, IPDI trimer and NC) occurred, the NCO groups of IPDI trimer were consumed totally and the backbone of NC was retained. The water contact angle measurements confirmed that introduced castor oil increased hydrophobicity of the film, thereby increasing the contact angle. TGA revealed that the CWNC film had better thermal resistance.

  13. Identification of minor acylglycerols less polar than triricinolein in castor oil by mass spectrometry

    Science.gov (United States)

    Triacylglycerols in castor oil less polar than triricinolein were identified by electrospray ionization – mass spectrometry using the lithium adducts of the acylglycerols from the HPLC fractions of castor oil. Thirty four new molecular species of acylglycerols containing hydroxy fatty acids in casto...

  14. Synthesis and membrane performance characterization of self-emulsified waterborne nitrocellulose dispersion modified with castor oil

    International Nuclear Information System (INIS)

    Su, Xiuxia; Zhao, Qingxiao; Zhang, Dan; Dong, Wei

    2015-01-01

    Graphical abstract: - Highlights: • Waterborne nitrocellulose dispersion modified with castor oil (CWNC) was synthesized successfully. • It is a kind of environment-friendly coatings, in which volatile organic content (VOC) is near zero. • Castor oil used as an internal crosslinking agent for WNC improved the properties of the coating. • When the mass fraction of castor oil to total reactants is 7%, emulsion and the coating are of the best comprehensive performance. - Abstract: Waterborne nitrocellulose dispersion modified with castor oil (CWNC) was designed and successfully synthesized by self emulsification and reaction among isophorone diisocyanate (IPDI) trimer, dimethylol propionic acid (DMPA), nitrocellulose (NC) and castor oil (C.O.). The CWNC was characterized by transmission electron microscope (TEM), Fourier transform infrared (FTIR) spectroscopy and thermal gravimetric analysis (TGA), etc. The particle size of CWNC increased with the increase of mass fraction of castor oil to total reactants, ω (C.O.). The morphology of particles is an approximate core–shell structure indicated by TEM. FTIR confirmed that the reactions (i.e. IPDI trimer and castor oil, IPDI trimer and NC) occurred, the NCO groups of IPDI trimer were consumed totally and the backbone of NC was retained. The water contact angle measurements confirmed that introduced castor oil increased hydrophobicity of the film, thereby increasing the contact angle. TGA revealed that the CWNC film had better thermal resistance.

  15. Acute Toxicity of Castor Oil Bean Extract and Tolerance Level of ...

    African Journals Online (AJOL)

    The experiment was carried out to determine the acute toxicity of raw castor oil bean (Ricinus communis) extract and the tolerance level of raw castor oil bean by broilers. The seeds were ground, defatted with petroleum ether and the residue was subjected to extraction with phosphate-buffered saline. The extract volume ...

  16. Castor oil induces laxation and uterus contraction via ricinoleic acid activating prostaglandin EP3 receptors.

    Science.gov (United States)

    Tunaru, Sorin; Althoff, Till F; Nüsing, Rolf M; Diener, Martin; Offermanns, Stefan

    2012-06-05

    Castor oil is one of the oldest drugs. When given orally, it has a laxative effect and induces labor in pregnant females. The effects of castor oil are mediated by ricinoleic acid, a hydroxylated fatty acid released from castor oil by intestinal lipases. Despite the wide-spread use of castor oil in conventional and folk medicine, the molecular mechanism by which ricinoleic acid acts remains unknown. Here we show that the EP(3) prostanoid receptor is specifically activated by ricinoleic acid and that it mediates the pharmacological effects of castor oil. In mice lacking EP(3) receptors, the laxative effect and the uterus contraction induced via ricinoleic acid are absent. Although a conditional deletion of the EP(3) receptor gene in intestinal epithelial cells did not affect castor oil-induced diarrhea, mice lacking EP(3) receptors only in smooth-muscle cells were unresponsive to this drug. Thus, the castor oil metabolite ricinoleic acid activates intestinal and uterine smooth-muscle cells via EP(3) prostanoid receptors. These findings identify the cellular and molecular mechanism underlying the pharmacological effects of castor oil and indicate a role of the EP(3) receptor as a target to induce laxative effects.

  17. Synthesis and membrane performance characterization of self-emulsified waterborne nitrocellulose dispersion modified with castor oil

    Science.gov (United States)

    Su, Xiuxia; Zhao, Qingxiao; Zhang, Dan; Dong, Wei

    2015-11-01

    Waterborne nitrocellulose dispersion modified with castor oil (CWNC) was designed and successfully synthesized by self emulsification and reaction among isophorone diisocyanate (IPDI) trimer, dimethylol propionic acid (DMPA), nitrocellulose (NC) and castor oil (C.O.). The CWNC was characterized by transmission electron microscope (TEM), Fourier transform infrared (FTIR) spectroscopy and thermal gravimetric analysis (TGA), etc. The particle size of CWNC increased with the increase of mass fraction of castor oil to total reactants, ω (C.O.). The morphology of particles is an approximate core-shell structure indicated by TEM. FTIR confirmed that the reactions (i.e. IPDI trimer and castor oil, IPDI trimer and NC) occurred, the NCO groups of IPDI trimer were consumed totally and the backbone of NC was retained. The water contact angle measurements confirmed that introduced castor oil increased hydrophobicity of the film, thereby increasing the contact angle. TGA revealed that the CWNC film had better thermal resistance.

  18. Alternative castor oil-based polyurethane adhesive used in the production of plywood

    Directory of Open Access Journals (Sweden)

    Fabricio Moura Dias

    2004-09-01

    Full Text Available Plywood is normally produced with urea-formaldehyde and/or phenol-formaldehyde adhesives. However, the former is considerably toxic and environmentally damaging, while the latter is expensive, thus motivating the search for alternative raw materials in plywood production. The castor oil-based polyurethane adhesive developed at the São Carlos Institute of Chemistry, University of São Paulo, is an environmentally friendly vegetal oil-based polymer that is harmless to humans. The wood species Eucalyptus grandis offers favorable properties for plywood the manufacture. The study reported on here involved the use of castor oil-based polyurethane adhesive to produce plywood with Eucalyptus grandis layers. The plywood's performance was evaluated based on the results of physical and mechanical tests recommended by the Brazilian code, ABNT. Tests results showed higher values than those reported in the literature and recommended by the ABNT, indicating that the castor oil-based polyurethane adhesive is a promising glue for the manufacture of plywood.

  19. Characterization and Digestibility of Detoxified Castor Oil Meal for Japanese Quails

    Directory of Open Access Journals (Sweden)

    PA dos Santos

    2015-12-01

    Full Text Available ABSTRACT These experiments were performed to determine the chemical composition, coefficients of nutrient and energy metabolizability, amino acid composition, and cytotoxicity of different castor oil meals subjected to different detoxification processes and added to the diet of Japanese quails. In the trial, 180 46-d-old female Japanese quails were distributed according to a completely randomized design into five treatments and with replicates of six bird each. The treatments consisted of following detoxification methods of castor oil meal: Castor oil meal A (CMA - recovery in alcohol at 80 °C for 20 minutes and drying at 80 °C; castor oil meal B (CMB and C (CMC - recovery in alcohol at 80 °C for 6 minutes, neutralization with 5% NaOH, and drying under direct sunlight sun for two days (CMB or pelleted (CMC; castor oil meal D (CMD - recovery in alcohol at 110 °C for 15 minutes and drying at 110 °C. Castor oil meal was added replacing 20% of the reference diet. There was slight chemical composition variation (1.21% in crude protein, 6% in dry matter, 2.2% in ether extract and 64 kcal/kg in gross energy among the castor oil meals submitted to the different treatments. The castor oil meal submitted to treatment C showed the highest amino acid values. In the cytotoxicity test, treatment D presented lower ricin activity. Castor oil meals A, C, and D may be included in Japanese quail diets; however, castor oil meal D is recommended due to the simplicity its industrial process, its low toxicity, and metabolizability coefficients obtained.

  20. Comparison of lubricant properties of castor oil and commercial engine oil

    Directory of Open Access Journals (Sweden)

    Binfa Bongfa

    2015-06-01

    Full Text Available The tribological performance of crude Nigeria-based castor oil has been investigated and compared with that of a foreign, 20W-50 high quality crankcase oil, to see its suitability as base oil for lubricating oils in indigenous vehicle and power plants engines. The experiment was conducted using a four ball tester. The results showed that unrefined castor oil has superior friction reduction and load bearing capability in an unformulated form than the commercial oil; can compete favourably with the commercial oil in wear protection when formulated with suitable antiwear agent, hence can be a good alternative base stock for crankcase oils suitable for Nigeria serviced vehicles, and plants engines from tribological, environmental, and non-food competitive points of view.

  1. Isocyanate-functionalized castor oil as a novel bitumen modifier

    OpenAIRE

    Cuadri Vega, Antonio Abad; García Morales, Moisés; Navarro Domínguez, Francisco Javier; Partal López, Pedro

    2013-01-01

    The use of biomaterials from renewable sources in the synthesis of polyurethane-derived polymers is lately receiving great attention from social, environmental and economic standpoints. In this work, prepolymers having different -NCO/-OH ratio were synthesized, by reaction of 4,4´-diphenylmethane diisocyanate (MDI) with castor oil (CO), to be used as modifying agent of asphaltic bitumen. Reactions between MDI and CO, performed with -NCO/-OH molar ratios of 8:1 and 4:1, have led to suitable bi...

  2. The calcium-dependent protein kinase RcCDPK2 phosphorylates sucrose synthase at Ser11 in developing castor oil seeds.

    Science.gov (United States)

    Fedosejevs, Eric T; Gerdis, Suzanne A; Ying, Sheng; Pyc, Michal; Anderson, Erin M; Snedden, Wayne A; Mullen, Robert T; She, Yi-Min; Plaxton, William C

    2016-10-15

    Imported sucrose is cleaved by sucrose synthase (SUS) as a critical initial reaction in the biosynthesis of storage end-products by developing seeds. Although SUS is phosphorylated at a conserved seryl residue by an apparent CDPK (Ca 2+ -dependent protein kinase) in diverse plant tissues, the functions and mechanistic details of this process remain obscure. Thus, the native CDPK that phosphorylates RcSUS1 (Ricinus communis SUS1) at Ser 11 in developing COS (castor oil seeds) was highly purified and identified as RcCDPK2 by MS/MS. Purified RcSUS1-K (-kinase) and heterologously expressed RcCDPK2 catalyzed Ca 2+ -dependent Ser 11 phosphorylation of RcSUS1 and its corresponding dephosphopeptide, while exhibiting a high affinity for free Ca 2+ ions [K 0.5 (Ca 2+ ) < 0.4 µM]. RcSUS1-K activity, RcCDPK2 expression, and RcSUS1 Ser 11 phosphorylation peaked during early COS development and then declined in parallel. The elimination of sucrose import via fruit excision triggered RcSUS1 dephosphorylation but did not alter RcSUS1-K activity, suggesting a link between sucrose signaling and posttranslational RcCDPK2 control. Both RcCDPK2-mCherry and RcSUS1-EYFP co-localized throughout the cytosol when transiently co-expressed in tobacco suspension cells, although RcCDPK2-mCherry was also partially localized to the nucleus. Subcellular fractionation revealed that ∼20% of RcSUS1-K activity associates with microsomal membranes in developing COS, as does RcSUS1. In contrast with RcCDPK1, which catalyzes inhibitory phosphorylation of COS bacterial-type phosphoenolpyruvate carboxylase at Ser 451 , RcCDPK2 exhibited broad substrate specificity, a wide pH-activity profile centered at pH 8.5, and insensitivity to metabolite effectors or thiol redox status. Our combined results indicate a possible link between cytosolic Ca 2+ -signaling and the control of photosynthate partitioning during COS development. © 2016 The Author(s); published by Portland Press Limited on behalf of the

  3. Characterization of Novel Castor Oil-Based Polyurethane Polymer Electrolytes

    Directory of Open Access Journals (Sweden)

    Salmiah Ibrahim

    2015-04-01

    Full Text Available Castor oil-based polyurethane as a renewable resource polymer has been synthesized for application as a host in polymer electrolyte for electrochemical devices. The polyurethane was added with LiI and NaI in different wt% to form a film of polymer electrolytes. The films were characterized by using attenuated total reflectance-Fourier transform infrared spectroscopy, dynamic mechanical analysis, electrochemical impedance spectroscopy, linear sweep voltammetry and transference number measurement. The highest conductivity of 1.42 × 10−6 S cm−1 was achieved with the addition of 30 wt% LiI and 4.28 × 10−7 S·cm−1 upon addition of 30 wt% NaI at room temperature. The temperature dependence conductivity plot indicated that both systems obeyed Arrhenius law. The activation energy for the PU-LiI and PU-NaI systems were 0.13 and 0.22 eV. Glass transition temperature of the synthesized polyurethane decreased from −15.8 °C to ~ −26 to −28 °C upon salts addition. These characterizations exhibited the castor oil-based polyurethane polymer electrolytes have potential to be used as alternative membrane for electrochemical devices.

  4. Biodiesel Production from Castor Oil and Its Application in Diesel Engine

    Directory of Open Access Journals (Sweden)

    S Ismail

    2014-12-01

    Full Text Available In this study, the optimum biodiesel conversion from crude castor oil to castor biodiesel (CB through transesterification method was investigated. The base catalyzed transesterification under different reactant proportion such as the molar ratio of alcohol to oil and mass ratio of catalyst to oil was studied for optimum production of castor biodiesel. The optimum condition for base catalyzed transesterification of castor oil was determined to be 1:4.5 of oil to methanol ratio and 0.005:1 of potassium hydroxide to oil ratio. The fuel properties of the produced CB such as the calorific value, flash point and density were analyzed and compared to conventional diesel. Diesel engine performance and emission test on different CB blends proved that CB was suitable to be used as diesel blends. CB was also proved to have lower emission compared to conventional diesel.

  5. 21 CFR 524.2620 - Liquid crystalline trypsin, Peru balsam, castor oil.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Liquid crystalline trypsin, Peru balsam, castor... NEW ANIMAL DRUGS § 524.2620 Liquid crystalline trypsin, Peru balsam, castor oil. (a)(1) Specifications... delivered to the wound site contains 0.12 milligram of crystalline trypsin, 87.0 milligrams of Peru balsam...

  6. Castor oil biodiesel and its blends as alternative fuel

    International Nuclear Information System (INIS)

    Berman, Paula; Nizri, Shahar; Wiesman, Zeev

    2011-01-01

    Intensive production and commercialization of biodiesel from edible-grade sources have raised some critical environmental concerns. In order to mitigate these environmental consequences, alternative oilseeds are being investigated as biodiesel feedstocks. Castor (Ricinus communis L.) is one of the most promising non-edible oil crops, due to its high annual seed production and yield, and since it can be grown on marginal land and in semi-arid climate. Still, few studies are available regarding its fuel-related properties in its pure form or as a blend with petrodiesel, many of which are due to its extremely high content of ricinoleic acid. In this study, the specifications in ASTM D6751 and D7467 which are related to the fatty acid composition of pure castor methyl esters (B100) and its blend with petrodiesel in a 10% vol ratio (B10) were investigated. Kinematic viscosity and distillation temperature of B100 (15.17 mm 2 s -1 and 398.7 o C respectively) were the only two properties which did not meet the appropriate standard limits. In contrast, B10 met all the specifications. Still, ASTM D7467 requires that the pure biodiesel meets the requirements of ASTM D6751. This can limit the use of a wide range of feedstocks, including castor, as alternative fuel, especially due to the fact that in practice vehicles normally use low level blends of biodiesel and petrodiesel. These issues are discussed in depth in the present study. -- Highlights: → CaME can be used as a biodiesel alternative feedstock when blended in petrodiesel. → Due to the high levels of ricinoleic acid maximum blending level is limited to 10%. → Today, CaME blends are not a viable alternative feedstock. → ASTM D7467 requires that pure biodiesel must meet all the appropriate limits.

  7. Unbodied dehydrated castor oil from oil of castor beans cultivated in tropical and sub tropical zones of pakistan

    International Nuclear Information System (INIS)

    Saleem, R.; Sultana, R.; Ambrat, A.; Kandhro, A.

    2014-01-01

    Commercially available castor oil was analysed for specific gravity at 25/25 degree C (0.959), acid value (0.5), iodine value (85), refractive index at 25 degree C (1.4769), viscosity at 25 degree C (6.8), and hydroxyl value (162). Fatty acid composition, including palmitic acid (I. 7%), stearic acid (1.39%), oleic acid (5.73%), linoleic acid (6.25%), and ricinoleic acid (84.2%) was estimated by means of GLC. Unbodied dehydrated castor oil (DCO- 15) 93% was prepared by using sodium bisulphate and sodium bisulphite and other reaction conditions. Unbodied DCO was analysed for iodine value (139), acid value (3.6), refractive index at 25 degree C (1.4820), specific gravity at 25/25 degree C and 30/30 degree C (0.9333 and 0.925) viscosity at 25 degree C and 30 degree C (200 cps and 1.85 poise), respectively. Fatty acid composition was also determined to ascertain the extent of dehydration due to the formation of conjugated linoleic acid (CLA, 36.9%) and non conjugated linoleic acid (NCLA, 46.8%). Ricinoleic acid was estimated as 3.83%. Unbodied DCO-15 was in good conformance with the standard specification of ASTM and other values cited in the literature. (author)

  8. Enzymatic incorporation of caffeoyl into castor oil to prepare the novel castor oil-based caffeoyl structured lipids.

    Science.gov (United States)

    Sun, Shangde; Wang, Ping; Zhu, Sha

    2017-05-10

    In this work, a novel castor oil-based caffeoyl structured lipids was successfully prepared by the enzymatic transesterification using castor oil (CO) as caffeoyl acceptor. During the structured lipids preparation, two competitive reactions, the hydrolysis of CO to form hydrophilic caffeoyl glycerols (CG)+dicaffeoyl glycerols (DCG) and the transesterification of CO with ethyl caffeate (EC) to form lipophilic caffeoyl mono- and di-acylglycerols (CMAG and CDAG), were found. Reaction progress was monitored using HPLC-ESI-MS and HPLC-UV. The effects of by-product ethanol removal and reaction variables on the transesterification and reaction selectivity were evaluated. Results showed that, the activation energies for the transesterification and for the selective formations of CMAG+CDAG and CG+DCG were 57.60kJ/mol, 58.86kJ/mol, and 60.53kJ/mol, respectively. Under the optimal reaction conditions (enzyme load 23%, 90°C, 1:3 molar ratio of EC to CO, and 46.5h), EC conversion and the yield of CMAG+CDAG were 93.68±2.52% and 78.11±1.35%, respectively. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Analysis of quality of the biogasoils of palm oil and castor oil

    International Nuclear Information System (INIS)

    Benjumea, Pedro Nel; Agudelo, Jhon Ramiro; Benavides, Alirio Yovany

    2004-01-01

    Biodiesel is a fuel made from raw materials of renewable origin such as vegetable oils. The objective of this work is to make a quality analysis of two types of biodiesel made from raw materials available in Colombia such as palm oil and castor oil. Biodiesel from palm oil complies with the majority of technical requirements specified by ASTM standards D-975 y D-6751. A high cloud point is the main drawback of this kind of biodiesel. This is a consequence of its highly saturated chemical nature. On the other hand, biodiesel from castor oil presents more difficulties in order to be used in diesel engines because of having a low cetane index and a high viscosity

  10. Comparative clinical trial of castor oil and diclofenac sodium in patients with osteoarthritis.

    Science.gov (United States)

    Medhi, B; Kishore, K; Singh, U; Seth, S D

    2009-10-01

    A randomized, double-blind, comparative clinical study was conducted to compare the safety and efficacy of castor oil with diclofenac sodium in patients with knee osteoarthritis. Subjects with symptoms of knee osteoarthritis were given a castor oil capsule 0.9 mL (n = 50) thrice daily for 4 weeks or a capsule of diclofenac sodium (n = 50), 50 mg thrice daily for 4 weeks. The subjects completed an overall evaluation of symptom relief at 2 weeks and 4 weeks of completed treatment. The subjects were evaluated by clinical, routine laboratory and radiographic investigations for improvement of disease conditions and also for adverse drug reaction. On completion of 4 weeks treatment it was observed that both drugs were significantly effective in the treatment of knee osteoarthritis (p castor oil there were no adverse effects reported. The present study indicates that castor oil can be used as an effective therapy in primary knee osteoarthritis. (c) 2009 John Wiley & Sons, Ltd.

  11. Transesterification of Castor Oil Catalyzed by Liquid Enzymes

    DEFF Research Database (Denmark)

    Andrade, Thalles Allan; Errico, Massimiliano; Christensen, Knud Villy

    2017-01-01

    economy. Based on this, and considering its low influence with food production, castor oil was investigated as a potential feedstock. Compared to other vegetable oils, it has a higher polarity resulting in better system homogeneity during reaction. The enzyme tested as catalyst was Eversa Transform. Four...... main reaction parameters were investigated for the optimization of the reaction route: the temperature was varied from 35 to 45 °C, the water content between 0-10 wt%, the enzyme content in the range of 2-10 wt%, and the alcohol-to-oil molar ratio from 4.5 to 7.5. The Response Surface Methodology...... was used to determine the optimal reaction conditions to get a high biodiesel yield and a low free fatty acids concentration. The results obtained showed that at 35 °C, 5 wt% of enzymes, 5 wt% of water, and a 6.0 alcohol-to-oil molar ratio, the yield in biodiesel was about 94% with a content of free fatty...

  12. Mechanical and thermal properties of castor oil polyurethane bone cement after gamma irradiation

    International Nuclear Information System (INIS)

    Azevedo, E.C.; Chierice, G.O.; Claro Neto, S.; Lepiesnki, C.M.; Nascimento, E.M.

    2009-01-01

    Polyurethanes from castor oil are being employed as bone cement in medical applications. In this work the thermal and mechanical properties of gamma irradiated polyurethanes derivative from castor oil were investigated by instrumented indentation, thermogravimetry and scanning electron microscopy. A slightly increase in hardness is observed only for doses as high as 100 kGy. Thermal analysis indicates stability at human body temperature. The glass transition temperature has small changes after gamma irradiation. (author)

  13. Local sustained delivery of bupivacaine HCl from a new castor oil-based nanoemulsion system.

    Science.gov (United States)

    Rachmawati, Heni; Arvin, Yang Aryani; Asyarie, Sukmadjaja; Anggadiredja, Kusnandar; Tjandrawinata, Raymond Rubianto; Storm, Gert

    2018-06-01

    Bupivacaine HCl (1-butyl-2',6'-pipecoloxylidide hydrochloride), an amide local anesthetic compound, is a local anesthetic drug utilized for intraoperative local anesthesia, post-operative analgesia and in the treatment of chronic pain. However, its utility is limited by the relative short duration of analgesia after local administration (approximately 9 h after direct injection) and risk for side effects. This work is aimed to develop a nanoemulsion of bupivacaine HCl with sustained local anesthetics release kinetics for improved pain management, by exhibiting extended analgesic action and providing reduced peak levels in the circulation to minimize side effects. Herein, biodegradable oils were evaluated for use in nanoemulsions to enable sustained release kinetics of bupivacaine HCl. Only with castor oil, a clear and stable nanoemulsion was obtained without the occurrence of phase separation over a period of 3 months. High loading of bupivacaine HCl into the castor oil-based nanoemulsion system was achieved with about 98% entrapment efficiency and the resulting formulation showed high stability under stress conditions (accelerated stability test) regarding changes in visual appearance, drug content, and droplet size. We show herein that the in vitro release and in vivo pharmacokinetic profiles as well as pharmacodynamic outcome (pain relief test) after subcutaneous administration in rats correlate well and clearly demonstrate the prolonged release and extended duration of activity of our novel nanoformulation. In addition, the lower C max value achieved in the blood compartment suggests the possibility that the risk for systemic side effects is reduced. We conclude that castor oil-based nanomulsion represents an attractive pain treatment possibility to achieve prolonged local action of bupivacaine HCl.

  14. Evaluation gamma radiation in composite sisal fiber- polyurethane derived of castor oil by bending test

    International Nuclear Information System (INIS)

    Souza, Felipe H. de; Geraldo, Ricardo R.; Vasco, Marina C.; Azevedo, Elaine; Claro Neto, Salvador

    2015-01-01

    Materials used for making furniture and accessories or positioning in X -ray examination rooms should not exhale volatile organic compounds and are resistant to ionizing radiation. One solution is the use of vegetable fiber and polyurethane composites of vegetable origin, since they are biodegradable, derived from renewable raw materials and have no volatile organic compounds. The main difficulty in developing this material is fiber adhesion with the polymer. The objective of this study is to evaluate the mechanical properties of composite sisal fiber composite, without further treatment, and polyurethane derived from castor oil, with a dose of 25 kGy gamma radiation, subjected to 3 points bending tests. (author)

  15. The catalytic microwave synthesis of biodegradable polyester polyols based on castor oil and l-lactide

    Science.gov (United States)

    Kojić, D.; Erceg, T.; Vukić, N.; Teofilović, V.; Ristić, I.; Budinski-Simendić, J.; Aleksić, V.

    2017-01-01

    Various strategies for achieving a functional poly(lactic acid) (PLA) have been developed such as ring-opening copolymerization with a functional monomer, the use of functional initiator and various post polymerization modifications. It is possible to obtain the star shaped polymer using natural oil with at least three OH groups as an initiator. It was estimated that despite of low-molecular mass of star-shaped PLA, the hydrophobic castor oil central core influenced the slow degradation rate in the case of injectable biomedical application. The star-shaped polymers with low-molecular-mass have a lower melt viscosity correlated with linear counterparts. In soft tissue reparation the polymer viscosity increases with fluid body contact and the solid implant can be formed. To ensure liquid state at injection temperature the low molar mass polymer is favorable. There is a particular size for each macromolecular chains at which chain entanglement occurs. In this work the influence of the l-lactide (LA) and the castor oil (CO) contents on the size of biodegradable branched polyester polyols was studied. The average molecular masses of synthesized polymers were estimated by GPC procedure. In sample formulations the [LA]/[CO] ratios were from to 113 to 533. Mn values for obtained polymers were from 5000 to 20000 Da. The molecular mass distribution for the resulting polymers was between 1.09 and 1.37.

  16. Optimization of biodiesel production from castor oil using response surface methodology.

    Science.gov (United States)

    Jeong, Gwi-Taek; Park, Don-Hee

    2009-05-01

    The short supply of edible vegetable oils is the limiting factor in the progression of biodiesel technology; thus, in this study, we applied response surface methodology in order to optimize the reaction factors for biodiesel synthesis from inedible castor oil. Specifically, we evaluated the effects of multiple parameters and their reciprocal interactions using a five-level three-factor design. In a total of 20 individual experiments, we optimized the reaction temperature, oil-to-methanol molar ratio, and quantity of catalyst. Our model equation predicted that the following conditions would generate the maximum quantity of castor biodiesel (92 wt.%): a 40-min reaction at 35.5 degrees C, with an oil-to-methanol molar ratio of 1:8.24, and a catalyst concentration of 1.45% of KOH by weight of castor oil. Subsequent empirical analyses of the biodiesel generated under the predicted conditions showed that the model equation accurately predicted castor biodiesel yields within the tested ranges. The biodiesel produced from castor oil satisfied the relevant quality standards without regard to viscosity and cold filter plugging point.

  17. Castor oil polyurethane containing silica nanoparticles as filling material of bone defect in rats.

    Science.gov (United States)

    Nacer, Renato Silva; Poppi, Rodrigo Ré; Carvalho, Paulo de Tarso Camilo de; Silva, Baldomero Antonio Kato da; Odashiro, Alexandre Nakao; Silva, Iandara Schettert; Delben, José Renato Jurkevicz; Delben, Angela Antonia Sanches Tardivo

    2012-01-01

    To evaluate the biologic behavior of the castor polymer containing silica nanoparticles as a bone substitute in diafisary defect. Twenty seven male Rattus norvegicus albinus Wistar lineage were submitted to bone defect filled with castor oil polymer. Three experimental groups had been formed with nine animals each: (1) castor oil polymer containing only calcium carbonate; (2) castor oil polymer with calcium carbonate and doped with 5% of silica nanoparticles; (3) castor polymer with calcium carbonate doped with 10% of silica nanoparticles; 3 animals of each group were submitted to euthanasia 15, 30 and 60 days after experimental procedure, and their femurs were removed to histological evaluation. there was bone growth in all the studied groups, with a greater tendency of growth in the group 1. After 30 days all the groups presented similar results. After 60 days a greater amount of fibroblasts, osteoblasts, osteocytes and osteoclasts in group 3 was observed, with integrated activity of 3 kinds of cells involved in the bone activation-reabsorption-formation. The castor polymer associated to the silica nanoparticles is biocompatible and allows osteoconduction. The presence of osteoprogenitors cells suggests silica osteoinduction capacity.

  18. Exogenous glutamine increases lipid accumulation in developing seeds of castor bean (Ricinus communis L. cultured in vitro

    Directory of Open Access Journals (Sweden)

    Zhang Yang

    2015-01-01

    Full Text Available This report describes biomass production and compositional changes of developing castor seeds in response to change in the nitrogen resource (glutamine of the medium. During the early developmental period (24-36 days after pollination, oil was found to initially accumulate in the developing seeds. Carbohydrates and oil were inversely related after glutamine provision (35 mM, in the culture medium. [U-14C] sucrose labeling was used to investigate the effect of metabolic fluxes among different storage materials. Addition of glutamine led to a 7% increase of labeling in lipids and an inverse decrease of labeling in carbohydrates. It was postulated that changes in the glutamine concentration in the medium are likely to influence the partitioning of resources between the various storage products, especially carbohydrates and oil. These observations will contribute to a better understanding of assimilate partitioning in developing castor seeds and the development of molecular strategies to improve castor bean seed quality and plant breeding studies.

  19. The castor oil production in Brazil and the biodiesel program (Probiodiesel); A producao de mamona no Brasil e o Probiodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Cezar Menezes; Almeida Neto, Jose Adolfo de; Pires, Monica de Moura [Universidade Estadual de Santa Cruz, Ilheus, BA (Brazil). Grupo Bioenergia e Meio Ambiente]. E-mails: biocomb@uesc.br; Rocha, Pauletti Karllien [Secretaria de Ciencia, Tecnologia e Inovacao do Estado da Bahia (SECTI), Salvador, BA (Brazil)]. E-mail: pauletti@secti.ba.gov.br

    2004-07-01

    The objective of this work is to present a prospective study of the national production of biodiesel and castor oil and to determine the level of the public investment necessary to attain the proposed production. For replacement of 2% of the diesel internal consumption, 786 millions of liters of biodiesel will be necessary, based on the consumption of 2003. From this amount 293 millions of liters (40%) will be derived from the castor oil. Considering the castor oil agricultural productivity of 1.8 t/ha and the 45% industrial income in oil, it will be necessary the planting of 360.000 ha and investment amount of R$ 370 million. An idleness of 71% of the castor oil crushing industry has been detected, but this sector works with profit as function of castor oil price. An deficit of 55% between the castor oil planting area and the necessary one for biodiesel production was identified, considering that all the castor oil will be exclusively used for this purpose. With the proposed goals and without the necessary allocation of public resources for castor oil production, probably it will not be possible to expect that 1/5 of the biodiesel national production can come from the domestic agricultural planting.

  20. Influence of solubilizer PEG-40 hydrogenated castor oil on carbopol gels’ structural-mechanical properties

    Directory of Open Access Journals (Sweden)

    Ye. V. Gladukh

    2017-12-01

    Full Text Available Rheological properties affect all stages of the drug development – from development to production, the characteristics of the final products and stability. A lot of substances have complex rheological properties; their viscosity and elasticity can vary depending on conditions acting from the outside, such as stress, deformation, time factor and temperature. Concentration, stability and composition also significantly affect the rheological properties of drugs. One of the current trends in modern pharmacy is the development of drugs in the form of gels. The rheological properties of gels are significantly influenced by surface-active substances, stabilizers, solubilizers, stabilizing their structure. A special group of stabilizers are hydrogenated vegetable oils and their compounds with polymers, which have the ability to structure formation in interphase layers and in the volume of phases. For this purpose, PEG-40 hydrogenated castor oil is widely used. The aim of this work is to study the effect of hydrogenated castor oil, used as an emulsifier, solubilizer, viscosity modifier and solvent in the technology of semisolid dosage forms, on the structural and mechanical properties of carbopol gels. Materials and methods. 1% gel carbopol with additives PEG-40 hydrogenated castor oil in the concentration range from 1 to 5 % was investigated as experimental samples of the gel base. A 10 % propylene glycol additive was used as humectant and plasticizer. Structural and mechanical studies were carried out using a rotational viscometer «RheolabQC», Anton Paar (Austria with coaxial cylinders CCC27/SS. The graphs of the gels were automatically plotted using the computer program. Results. Analysis of the rheological parameters of the carbopol with PEG-40 hydrogenated castor oil gel base shows that the solubilizer has an active influence on the structural and mechanical properties of the base. Addition of PEG-40 GMM to the carbopol gel increases the yield

  1. Lipase applications in oil hydrolysis with a case study on castor oil: a review.

    Science.gov (United States)

    Goswami, Debajyoti; Basu, Jayanta Kumar; De, Sirshendu

    2013-03-01

    Lipase (triacylglycerol acylhydrolase) is a unique enzyme which can catalyze various types of reactions such as hydrolysis, esterification, alcoholysis etc. In particular, hydrolysis of vegetable oil with lipase as a catalyst is widely studied. Free lipase, lipase immobilized on suitable support, lipase encapsulated in a reverse micelle and lipase immobilized on a suitable membrane to be used in membrane reactor are the most common ways of employing lipase in oil hydrolysis. Castor oil is a unique vegetable oil as it contains high amounts (90%) of a hydroxy monounsaturated fatty acid named ricinoleic acid. This industrially important acid can be obtained by hydrolysis of castor oil. Different conventional hydrolysis processes have certain disadvantages which can be avoided by a lipase-catalyzed process. The degree of hydrolysis varies widely for different lipases depending on the operating range of process variables such as temperature, pH and enzyme loading. Immobilization of lipase on a suitable support can enhance hydrolysis by suppressing thermal inactivation and estolide formation. The presence of metal ions also affects lipase-catalyzed hydrolysis of castor oil. Even a particular ion has different effects on the activity of different lipases. Hydrophobic organic solvents perform better than hydrophilic solvents during the reaction. Sonication considerably increases hydrolysis in case of lipolase. The effects of additives on the same lipase vary with their types. Nonionic surfactants enhance hydrolysis whereas cationic and anionic surfactants decrease it. A single variable optimization method is used to obtain optimum conditions. In order to eliminate its disadvantages, a statistical optimization method is used in recent studies. Statistical optimization shows that interactions between any two of the following pH, enzyme concentration and buffer concentration become significant in presence of a nonionic surfactant named Span 80.

  2. Castor oil as a natural alternative to labor induction: A retrospective descriptive study.

    Science.gov (United States)

    DeMaria, Andrea L; Sundstrom, Beth; Moxley, Grace E; Banks, Kendall; Bishop, Ashlan; Rathbun, Lesley

    2018-04-01

    To describe birthing outcomes among women who consumed castor oil cocktail as part of a freestanding birth center labor induction protocol. De-identified data from birth logs and electronic medical records were entered into SPSS Statistics 22.0 for analysis for all women who received the castor oil cocktail (n=323) to induce labor between January 2008 and May 2015 at a birth center in the United States. Descriptive statistics were analyzed for trends in safety and birthing outcomes. Of the women who utilized the castor oil cocktail to stimulate labor, 293 (90.7%) birthed vaginally at the birth center or hospital. The incidence of maternal adverse effects (e.g., nausea, vomiting, extreme diarrhea) was less than 7%, and adverse effects of any kind were reported in less than 15% of births. An independent sample t-test revealed that parous women were more likely to birth vaginally at the birth center after using the castor oil cocktail than their nulliparous counterparts (poil cocktail to induce labor were able to give birth vaginally with little to no maternal or fetal complications. Findings indicate further research is needed to compare the safety and effectiveness of natural labor induction methodologies, including castor oil, to commonly used labor induction techniques in a prospective study or clinical trial. Copyright © 2017 Australian College of Midwives. Published by Elsevier Ltd. All rights reserved.

  3. Effectiveness of castor oil extract on Escherichia coli and its endotoxins in root canals.

    Science.gov (United States)

    Valera, Marcia Carneiro; Maekawa, Lilian Eiko; Chung, Adriana; de Oliveira, Luciane Dias; Carvalho, Claudio Antonio Talge; Koga-Ito, Cristiane Yumi; Jorge, Antonio Olavo Cardoso

    2012-01-01

    This in vitro study sought to evaluate the effectiveness of castor oil extract used as an irrigating solution on Escherichia coli and its endotoxins in root canals. Sixty single-rooted teeth were prepared (using castor oil extract as irrigating solution) and divided into five groups (n = 12): Group 1 samples were treated with calcium hydroxide (Ca(OH)2), Group 2 samples were treated with polymyxin B, Group 3 samples were treated with Ca(OH)2 and 2% chlorhexidine gel (CHX), and Group 4 samples were treated with castor oil extract. A control group used physiological saline solution as an irrigant. Canal content samples were collected at four different times: immediately after instrumentation, seven days after instrumentation, after 14 days of intracanal medication, and seven days after removal of intracanal medication. A plating method was used to assess antimicrobial activity and the quantification of endotoxins was evaluated by the chromogenic Limulus lysate assay. Data were submitted to ANOVA and a Dunn test (a = 5%). Irrigation with castor oil extract decreased E. coli counts but had no effect on the level of endotoxins. Samples taken seven days after removal of medication revealed a significant reduction in endotoxin levels in Groups 3 and 4. Compared to the saline solution irrigation, castor oil extract decreased microorganism counts in root canals immediately after canal preparation. None of the medications used completely eliminated endotoxins in the root canal.

  4. Bio-based polyurethane prepared from Kraft lignin and modified castor oil

    Directory of Open Access Journals (Sweden)

    L. B. Tavares

    2016-11-01

    Full Text Available Current challenges highlight the need for polymer research using renewable natural sources as a substitute for petroleum-based polymers. The use of polyols obtained from renewable sources combined with the reuse of industrial residues such as lignin is an important agent in this process. Different compositions of polyurethane-type materials were prepared by combining technical Kraft lignin (TKL with castor oil (CO or modified castor oil (MCO1 and MCO2 to increase their reactivity towards diphenylmethane diisocyanate (MDI. The results indicate that lignin increases the glass transition temperature, the crosslinking density and improves the ultimate stress especially for those prepared from MCO2 and 30% lignin content from 8.2 MPa (lignin free to 23.5 MPa. Scanning electron microscopy (SEM micrographs of rupture surface after uniaxial tensile tests show ductile-to-brittle transition. The results show the possibility to develop polyurethane-type materials, varying technical grade Kraft lignin content, which cover a wide range of mechanical properties (from large elastic/low Young modulus to brittle/high Young modulus polyurethanes.

  5. Hypersensitivity reaction studies of a polyethoxylated castor oil-free, liposome-based alternative paclitaxel formulation.

    Science.gov (United States)

    Wang, Hongbo; Cheng, Guang; Du, Yuan; Ye, Liang; Chen, Wenzhong; Zhang, Leiming; Wang, Tian; Tian, Jingwei; Fu, Fenghua

    2013-03-01

    The commercial drug paclitaxel (Taxol) may introduce hypersensitivity reactions associated with the polyethoxylated castor oil-ethanol solvent. To overcome these problems, we developed a polyethoxylated castor oil-free, liposome-based alternative paclitaxel formulation, known as Lipusu. In this study, we performed in vitro and in vivo experiments to compare the safety profiles of Lipusu and Taxol, with special regard to hypersensitivity reactions. First, Swiss mice were used to determine the lethal dosages, and then to evaluate hypersensitivity reactions, followed by histopathological examination and enzyme-linked immunosorbent assays (ELISAs) of serum SC5b-9 and lung histamine. Additionally, healthy human serum was used to analyze in vitro complement activation. Finally, an MTT assay was used to determine the in vitro anti-proliferation activity. Our data clearly showed that Lipusu displayed a much higher safety margin and did not induce hypersensitivity or hypersensitivity-related lung lesions, which may be associated with the fact that Lipusu did not activate complement or increase histamine release in vivo. Moreover, Lipusu did not promote complement activation in healthy human serum in vitro, and demonstrated anti-proliferative activity against human cancer cells, similar to that of Taxol. Therefore, the improved formulation of paclitaxel, which exhibited a much better safety profile and comparable cytotoxic activity to Taxol, may bring a number of benefits to cancer patients.

  6. Polyurethane and polyurea nanoparticles based on polyoxyethylene castor oil derivative surfactant suitable for endovascular applications.

    Science.gov (United States)

    Morral-Ruíz, Genoveva; Melgar-Lesmes, Pedro; García, María Luísa; Solans, Conxita; García-Celma, María José

    2014-01-30

    The design of new, safe and effective nanotherapeutic systems is an important challenge for the researchers in the nanotechnology area. This study describes the formation of biocompatible polyurethane and polyurea nanoparticles based on polyoxyethylene castor oil derivative surfactant formed from O/W nano-emulsions by polymerization at the droplet interfaces in systems composed by aqueous solution/Kolliphor(®) ELP/medium chain triglyceride suitable for intravenous administration. Initial nano-emulsions incorporating highly hydrophilic materials were prepared by the phase inversion composition (PIC) method. After polymerization, nanoparticles with a small particle diameter (25-55 nm) and low polydispersity index were obtained. Parameters such as concentration of monomer, O/S weight ratio as well as the polymerization temperature were crucial to achieve a correct formation of these nanoparticles. Moreover, FT-IR studies showed the full conversion of the monomer to polyurethane and polyurea polymers. Likewise the involvement of the surfactant in the polymerization process through their nucleophilic groups to form the polymeric matrix was demonstrated. This could mean a first step in the development of biocompatible systems formulated with polyoxyethylene castor oil derivative surfactants. In addition, haemolysis and cell viability assays evidenced the good biocompatibility of KELP polyurethane and polyurea nanoparticles thus indicating the potential of these nanosystems as promising drug carriers. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. An analysis of expressed sequence tags of developing castor endosperm using a full-length cDNA library

    Directory of Open Access Journals (Sweden)

    Wallis James G

    2007-07-01

    Full Text Available Abstract Background Castor seeds are a major source for ricinoleate, an important industrial raw material. Genomics studies of castor plant will provide critical information for understanding seed metabolism, for effectively engineering ricinoleate production in transgenic oilseeds, or for genetically improving castor plants by eliminating toxic and allergic proteins in seeds. Results Full-length cDNAs are useful resources in annotating genes and in providing functional analysis of genes and their products. We constructed a full-length cDNA library from developing castor endosperm, and obtained 4,720 ESTs from 5'-ends of the cDNA clones representing 1,908 unique sequences. The most abundant transcripts are genes encoding storage proteins, ricin, agglutinin and oleosins. Several other sequences are also very numerous, including two acidic triacylglycerol lipases, and the oleate hydroxylase (FAH12 gene that is responsible for ricinoleate biosynthesis. The role(s of the lipases in developing castor seeds are not clear, and co-expressing of a lipase and the FAH12 did not result in significant changes in hydroxy fatty acid accumulation in transgenic Arabidopsis seeds. Only one oleate desaturase (FAD2 gene was identified in our cDNA sequences. Sequence and functional analyses of the castor FAD2 were carried out since it had not been characterized previously. Overexpression of castor FAD2 in a FAH12-expressing Arabidopsis line resulted in decreased accumulation of hydroxy fatty acids in transgenic seeds. Conclusion Our results suggest that transcriptional regulation of FAD2 and FAH12 genes maybe one of the mechanisms that contribute to a high level of ricinoleate accumulation in castor endosperm. The full-length cDNA library will be used to search for additional genes that affect ricinoleate accumulation in seed oils. Our EST sequences will also be useful to annotate the castor genome, which whole sequence is being generated by shotgun sequencing at

  8. THE EFFECTS OF POSSIBLE CONTAMINATION ON THE RADIOCARBON DATING OF THE DEAD SEA SCROLLS II : EMPIRICAL METHODS TO REMOVE CASTOR OIL AND SUGGESTIONS FOR REDATING

    NARCIS (Netherlands)

    Rasmussen, Kaare Lund; van der Plicht, Johannes; Doudna, Gregory; Nielsen, Frederik; Hojrup, Peter; Stenby, Erling Halfdan; Pedersen, Carl Th; Højrup, Peter

    2009-01-01

    While kept at the Rockefeller Museum in East Jerusalem, many Dead Sea Scroll fragments were exposed to castor oil by the original team of editors in the course of cleaning the parchments. Castor oil must be regarded as a serious contaminant in relation to radiocarbon dating. If modern castor oil is

  9. Identification of diacylglycerol and triacylglycerols containing 11,12,13-trihydroxy-9,14-octadecadienoic acid in castor oil by mass spectrometry

    Science.gov (United States)

    Castor oil has many industrial uses. Molecular species of acylglycerols containing monohydroxy, dihydroxy and trihydroxy fatty acids in castor oil have been reported. The identification of acylglycerols containing a triOH18:2 fatty acid in castor oil is reported here. The structure of this novel fat...

  10. Screening of the entire USDA castor germplasm collection for oil content and fatty acid composition for optimum biodiesel production.

    Science.gov (United States)

    Wang, Ming Li; Morris, J Bradley; Tonnis, Brandon; Pinnow, David; Davis, Jerry; Raymer, Paul; Pederson, Gary A

    2011-09-14

    Castor has tremendous potential as a feedstock for biodiesel production. The oil content and fatty acid composition in castor seed are important factors determining the price for production and affecting the key fuel properties of biodiesel. There are 1033 available castor accessions collected or donated from 48 countries worldwide in the USDA germplasm collection. The entire castor collection was screened for oil content and fatty acid composition by nuclear magnetic resonance (NMR) and gas chromatography (GC), respectively. Castor seeds on the average contain 48.2% oil with significant variability ranging from 37.2 to 60.6%. Methyl esters were prepared from castor seed by alkaline transmethylation. GC analysis of methyl esters confirmed that castor oil was composed primarily of eight fatty acids: 1.48% palmitic (C16:0), 1.58% stearic (C18:0), 4.41% oleic (C18:1), 6.42% linoleic (C18:2), 0.68% linolenic (C18:3), 0.45% gadoleic (C20:1), 84.51% ricinoleic (C18:1-1OH), and 0.47% dihydroxystearic (C18:0-2OH) acids. Significant variability in fatty acid composition was detected among castor accessions. Ricinoleic acid (RA) was positively correlated with dihydroxystearic acid (DHSA) but highly negatively correlated with the five other fatty acids except linolenic acid. The results for oil content and fatty acid composition obtained from this study will be useful for end-users to explore castor germplasm for biodiesel production.

  11. Castor oil for induction of labor in post-date pregnancies: A randomized controlled trial.

    Science.gov (United States)

    Gilad, Ronit; Hochner, Hagit; Savitsky, Bella; Porat, Shay; Hochner-Celnikier, Drorith

    2018-02-01

    Castor oil is a substance used for labor induction in an inpatient setting. However, its efficacy as an agent for the induction of labor, for post-date pregnancies in an outpatient setup is unknown. Efficacy of castor oil as an agent for the induction of labor, for post-date pregnancies in outpatient settings. Eighty-one women with a low-risk post-date singleton pregnancy with a Bishop score≤7, without effective uterine contractions were randomized to the intervention, 60ml of castor oil, or the control, 60ml of sun-flower oil. The primary outcome was proportion of women entering the active phase of labor 24, 36, 48h after ingestion. Secondary outcomes included meconium stained amniotic fluid, abnormal fetal heart rate tracing, cesarean section rate, instrumental deliveries, birth weight, 5min Apgar score, chorioamnionitis, hypertensive complications, retained placenta, and post-partum hemorrhage. Intervention and control groups included 38 and 43 women, respectively. No differences in baseline characteristics, except for age were noted. The observed interaction between castor oil and parity was significant (p interaction =0.02). Multiparous women in the intervention group exhibited a significant beneficial effect on entering active labor within 24, 36 and 48h after castor oil consumption compared with the placebo (Hazard Ratio=2.93, p=0.048; Hazard Ratio=3.29, p=0.026; Hazard Ratio=2.78, p=0.042 respectively). This effect was not noted among primiparous women. No differences in rate of obstetric complications or adverse neonatal outcomes were noted. Castor oil is effective for labor induction, in post-date multiparous women in outpatient settings. Copyright © 2017. Published by Elsevier Ltd.

  12. Thermophysical properties of biodiesel and related systems: (Liquid + liquid) equilibrium data for castor oil biodiesel

    International Nuclear Information System (INIS)

    Mazutti, Marcio A.; Voll, Fernando A.P.; Cardozo-Filho, Lúcio; Corazza, Marcos L.; Lanza, Marcelo; Priamo, Wagner L.; Oliveira, J. Vladimir

    2013-01-01

    Highlights: ► (Liquid + liquid) equilibrium data for multicomponent castor oil FAME and FAEE castor oil. ► Tie-lines and solubility curves (binodal) by cloud-point method for FAME and FAEE systems. ► Experimental data correlated using the UNIQUAC model. -- Abstract: This work reports new liquid–liquid solubility values (binodal curves) as well as (liquid + liquid) equilibrium data for, ternary and quaternary systems containing fatty acid methyl esters (FAME) and fatty acid ethyl esters (FAEE) from castor oil, water, glycerol, methanol and anhydrous ethanol at T = (303.15, 318.15, and 333.15) K. Solubility curves (binodal) were also obtained by the cloud-point method for binary systems containing FAME, FAEE, water, or glycerol. All results obtained can be considered of good quality. The experimental values were correlated using the UNIQUAC model, whose results presented good performance and satisfactory fitting of equilibrium values

  13. Castor oil biodiesel: an economic evaluation; Biodiesel de mamona: uma avaliacao economica

    Energy Technology Data Exchange (ETDEWEB)

    Pires, Monica de Moura; Alves, Jaenes Miranda; Almeida Neto, Jose Adolfo de; Almeida, Cezar Menezes; Sousa, Geovania Silva de; Cruz, Rosenira Serpa da; Monteiro, Renata; Lopes, Beatriz Sampaio; Robra, Sabine [Universidade Estadual de Santa Cruz, Ilheus, BA (Brazil). Grupo Bioenergia e Meio Ambiente]. E-mails: mpires@uesc.br; jaenes@uesc.br; jalmeida@uesc.br; roserpa@uesc.br

    2004-07-01

    The production cost of castor oil biodiesel by methyl way and its economic viability, using as reference the production cost data of castor oil and the implantation of the pilot plant at UESC - state university of Santa Cruz, Bahia State, Brazil was determined. From this information, it was seen that the estimated price of castor oil biodiesel is close to the diesel price in the Itabuna market, Bahia state, Brazil. The indicators show economic viability of the mini-power plant installation. Such information are preliminary estimative for the market and can be modified as function of changes in the main factors used to have the production costs, as well as the sectorial policies that drives the activity as much in levels of raw material production as in biodiesel.

  14. Thermal Stability and Lubrication Properties of Biodegradable Castor Oil on AISI 4140 Steel

    Directory of Open Access Journals (Sweden)

    María Teresa Hernández-Sierra

    2018-06-01

    Full Text Available Lubricants have much importance in several industries, principally serving to reduce friction and wear in mechanical elements. In this study, the influence of Castor oil as bio-lubricant on the friction and wear performance of AISI 4140 steel was investigated. For that purpose, pin-on-disk friction tests were conducted according to ASTM G-99, by using pins of tungsten carbide (WC as counterparts. The experiments were performed at two different temperatures. This work also presents the Attenuated Total Reflection Fourier Transform Infrared Spectroscopy (ATR-FTIR and 1H-NMR analyses for the chemical characterization of oils and a study of their degradation by oxidation. The analysis of the damage caused to steel due to friction was deepened by analyzing its microhardness and microstructure in the worn zone. As a reference, the same experiments were performed with a commercial oil. The friction behavior of 4140 steel/WC with Castor oil lubrication at the two temperatures was notably better than that obtained under the reference oil lubrication. The kinetic friction coefficient (µk was up to 76% lower. However, a slight increase in steel wear was observed under Castor oil lubrication. Despite this, these results suggest that Castor oil could be used as bio-lubricant in systems which are susceptible to levels of high friction.

  15. Reconstruction of the Cranial Vault Contour Using Tissue Expander and Castor Oil Prosthesis.

    Science.gov (United States)

    de Moraes, Sylvio Luiz Costa; Afonso, Alexandre Maurity de Paula; Santos, Roberto Gomes Dos; Mattos, Ricardo Pereira; Duarte, E Bruno Gomes

    2017-09-01

    Nowadays the reconstruction of craniofacial defects can be performed with different kinds of materials, which include the bone and the so-called biomaterials, which have the advantage of not needing a surgical site donor. Among these materials, great attention is given to polymers. In this large group, current attention is focused on the castor oil polymer, since this polymer is biocompatible, low cost, and has adequate strength for reconstruction of the craniomaxillofacial complex. This study aims to report the use of a prosthetic castor oil polymer for reconstruction of extensive defect, caused by a trauma, in the temporoparietal region.

  16. Identification of diacylglycerol and triacylglycerol containing 11,12,13-trihydroxy-9,14-octadecadienoic acid in castor oil.

    Science.gov (United States)

    Lin, Jiann-Tsyh; Chen, Grace Q

    2011-02-28

    Castor oil has many industrial uses. Molecular species of acylglycerols containing monohydroxy, dihydroxy and trihydroxy fatty acids in castor oil have been reported. We report here the identification of acylglycerols containing a triOH18:2 fatty acid in castor oil. The structure of this novel fatty acid was proposed as 11,12,13-trihydroxy-9,14-octadecadienoic acid by the mass spectrometry of the lithiated adducts of acylglycerols in the HPLC fractions of castor oil. The fragmentation pathways of the lithiated adduct of 11,12,13-trihydroxy-9,14-octadecadienoic acid were proposed. We also proposed the biosynthetic pathways of polyhydroxy fatty acids in castor. Published by Elsevier B.V.

  17. Nanoparticle Structures with (Un-)Hydrogenated Castor Oil as Hydrophobic Paper Coating.

    Science.gov (United States)

    Samyn, Pieter; Vonck, Leo; Stanssens, Dirk; Abbeele, Henk Van den

    2018-05-01

    The encapsulation of vegetable oils within an aqueous dispersion of polymer nanoparticles provides an alternative route to create functional paper coatings from renewable resources, by combining the presentation of hydrophobic moieties together with variations in roughness at the paper surface. The effects of two selected vegetable oil types, i.e., castor oil and hydrogenated castor oil (wax), are compared in terms of nanoparticle synthesis, coating hydrophobicity and surface gloss. The nanoparticles were synthesized by adding 50 wt.-% oil during imidization of poly(styrene-co-maleic anhydride) with ammonium hydroxide. From evaluation of the thermal properties, the nanoparticles have a high glass transition temperature that is suppressed in presence of oil. The nanoparticles with hydrogenated castor oil have higher imide content and better thermal stability compared to castor oil, in parallel with lower chemical reactivity of the hydrogenated oil and less interference with the imidization reaction. After deposition as a coating on paper, the physical coating properties are discussed in parallel with the coating chemistry and morphology or roughness at different scale lengths. The nanoparticle coatings with hydrogenated oil provides a multi-scale roughness with an open, porous nanoparticles structures and presentation of some amount free oil augmenting hydrophobicity towards a water contact angle of 128° (static contact angle) or 138° (advancing contact angle). The differences in surface coverage of coated papers in terms of imide and oil contents are confirmed by chemical Raman mapping. The differences in surface roughness are confirmed by non-contact profilometry, laser interferometry and atomic force microscopy.

  18. A Comparative Experimental Analysis of Tribological Properties Between Commercial Mineral Oil and Neat Castor Oil using Taguchi Method in Boundary Lubrication Regime

    Directory of Open Access Journals (Sweden)

    S. Bhaumik

    2016-03-01

    Full Text Available The present work aims to carry out a comparative experimental analysis of tribological properties of 372cSt mineral oil and 229cSt castor oil. The antiwear and extreme pressure properties of both the oils have been analysed according to ASTM G 99 and ASTM D-2783 standards. The surfaces of the balls and pins after tribo tests have been analysed using Scanning Electron Microscope (SEM images. The present test results predict that the antiwear and extreme pressure properties in case of the selected commercially available mineral oil are better than neat castor oil. Both coefficient of friction and frictional force increased by 16-42 % and 16-35 % respectively in case of neat castor oil as compared with that of the mineral oil. The load carrying capacity in case of mineral oil has been found to be 250 kg while in case of castor oil it has been found to be 126 kg. SEM images show a higher plastic deformation in case of castor oil as compared to the mineral oil. Both mineral oil and castor oil showed surface deteriorations and increase in roughness after 40 hrs of intermittent running during scuffing test. Thus, the present investigation indicates that the tribological properties of neat castor are inferior to that of mineral oil although close observation of the results shows that both AW and EP properties of neat castor oil are much closer to that of commercial mineral oil. Thus, the present work would help in formulating castor oil based new bio lubricants with better anti wear and extreme pressure properties

  19. Exploiting EST databases for the development and characterization of EST-SSR markers in castor bean (Ricinus communis L.

    Directory of Open Access Journals (Sweden)

    Yang Jun-Bo

    2010-12-01

    Full Text Available Abstract Background The castor bean (Ricinus communis L., a monotypic species in the spurge family (Euphorbiaceae, 2n = 20, is an important non-edible oilseed crop widely cultivated in tropical, sub-tropical and temperate countries for its high economic value. Because of the high level of ricinoleic acid (over 85% in its seed oil, the castor bean seed derivatives are often used in aviation oil, lubricants, nylon, dyes, inks, soaps, adhesive and biodiesel. Due to lack of efficient molecular markers, little is known about the population genetic diversity and the genetic relationships among castor bean germplasm. Efficient and robust molecular markers are increasingly needed for breeding and improving varieties in castor bean. The advent of modern genomics has produced large amounts of publicly available DNA sequence data. In particular, expressed sequence tags (ESTs provide valuable resources to develop gene-associated SSR markers. Results In total, 18,928 publicly available non-redundant castor bean EST sequences, representing approximately 17.03 Mb, were evaluated and 7732 SSR sites in 5,122 ESTs were identified by data mining. Castor bean exhibited considerably high frequency of EST-SSRs. We developed and characterized 118 polymorphic EST-SSR markers from 379 primer pairs flanking repeats by screening 24 castor bean samples collected from different countries. A total of 350 alleles were identified from 118 polymorphic SSR loci, ranging from 2-6 per locus (A with an average of 2.97. The EST-SSR markers developed displayed moderate gene diversity (He with an average of 0.41. Genetic relationships among 24 germplasms were investigated using the genotypes of 350 alleles, showing geographic pattern of genotypes across genetic diversity centers of castor bean. Conclusion Castor bean EST sequences exhibited considerably high frequency of SSR sites, and were rich resources for developing EST-SSR markers. These EST-SSR markers would be particularly

  20. Synthesis and properties of radiation modified thermally cured castor oil based polyurethanes

    Energy Technology Data Exchange (ETDEWEB)

    Mortley, Aba [Department of Chemistry and Chemical Engineering, Royal Military College of Canada, Kingston, P.O. Box 17000, Stn Forces, Kingston, ON, K7K 7B4 (Canada)], E-mail: aba.mortley@rmc.ca; Bonin, H.W.; Bui, V.T. [Department of Chemistry and Chemical Engineering, Royal Military College of Canada, Kingston, P.O. Box 17000, Stn Forces, Kingston, ON, K7K 7B4 (Canada)

    2007-12-15

    Thermally cured polyurethanes were prepared from castor oil and hexamethylene diisocyanate (HMDI). Due to the long aliphatic chain of the castor oil component of polyurethane, thermal curing of castor oil based polyurethane (COPU) is limited by increasing polymer viscosity. To enhance further crosslinking, COPUs were exposed to doses up to 3.0 MGy produced by the mixed ionizing radiation field of a SLOWPOKE-2 research nuclear reactor. The physico-mechanical properties of castor oil based polyurethanes (COPU), unirradiated and irradiated, were characterized by mechanical tensile tests. A four-fold increase in modulus and tensile strength values from 0.930 to 4.365 MPa and 0.149 to 0.747 MPa, respectively, suggests improved physico-mechanical properties resulting from radiation. The changing areas of the carbonyl and the NH absorbance peaks and the disappearance of the isocyanate peak in the FTIR spectra as radiation progressed, indicates increased hydrogen bonding and intermolecular crosslinking, which is in agreement with the mechanical tests. Unchanging {sup 13}C solid state NMR spectra imply limited sample degradation with increasing radiation.

  1. Recycling of waste poly(ethylene terephthalate) with castor oil using microwave heating

    Czech Academy of Sciences Publication Activity Database

    Beneš, Hynek; Slabá, J.; Walterová, Zuzana; Rais, David

    2013-01-01

    Roč. 98, č. 11 (2013), s. 2232-2243 ISSN 0141-3910 R&D Projects: GA MPO 2A-2TP1/135 Institutional support: RVO:61389013 Keywords : poly(ethylene terephthalate) * castor oil * chemical recycling Subject RIV: CD - Macromolecular Chemistry Impact factor: 2.633, year: 2013

  2. Lipase catalyzed transesterification of castor oil by straight chain higher alcohols.

    Science.gov (United States)

    Malhotra, Deepika; Mukherjee, Joyeeta; Gupta, Munishwar N

    2015-03-01

    Biolubricants from Castor oil were produced enzymatically by transesterification with higher alcohols using a lipase mixture of immobilized Mucor miehei (RMIM) and immobilized Candida antarctica lipase B (Novozym 435) under low water conditions. The conversions were in the range of 80-95% under the optimized conditions. Copyright © 2014 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  3. Derivatization of castor oil based estolide esters: Preparation of epoxides and cyclic carbonates

    Science.gov (United States)

    Estolides that are based on castor oil and oleic acid are versatile starting points for the production of industrial fluids with new properties. A variety of unsaturated estolides were derivatized by epoxidation with hydrogen peroxide. The epoxidized estolides were further modified using supercritic...

  4. Evaluation of castor oil-based polyurethane membranes in rat bone-marrow cell culture.

    Science.gov (United States)

    Cerejo, Sofia de Amorim; Rahal, Sheila Canevese; Lima Neto, João Ferreira de; Voorwald, Fabiana Azevedo; Alvarenga, Fernanda da Cruz Landim e

    2011-10-01

    To evaluate three methods to isolate rats MSCs and to analyze the potential of a castor oil polyurethane base membrane as a scaffold for MSCs. Four male Wistar rats, aged 20-30 days were used. Bone marrow aspirates from femur and tibia were harvested using DMEM high glucose and heparin. The cell culture was performed in three different ways: direct culture and two types of density gradients. After 15 days, was made the 1st passage and analyzed cell viability with markers Hoerscht 33342 and propidium iodide. The MSCs were characterized by surface markers with the aid of flow cytometry. After this, three types of castor oil polyurethane membranes associated with the MSCs were kept on the 6-well plate for 5 days and were analyzed by optical microscopy to confirm cell aggregation and growth. Separation procedures 1 and 2 allowed adequate isolation of MSCs and favored cell growth with the passage being carried out at 70% confluence after 15 days in culture. The cells could not be isolated using procedure 3. When the 3 castor oil polyurethane membrane types were compared it was possible to observe that the growth of MSCs was around 80% in membrane type 3, 20% in type 2, and 10% in type 1. Both Ficoll-Hypaque densities allow isolation of rat MSCs, and especially castor oil-based membrane type 3 may be used as a scaffold for MSCs.

  5. Amelioration of Anti-Nutritive Effects of Castor Oil Seed ( Ricinus ...

    African Journals Online (AJOL)

    Three hundred and twenty (320) day old male broilers were used to investigate the amelioration of anti-nutritive effects of castor oil seed (Ricinus communis) meal in broilers' ration using natural fermentation and DL-Methionine supplementation. The experimental designed was a 4 × 2 factorial arrangement of dietary ...

  6. Synthesis and properties of radiation modified thermally cured castor oil based polyurethanes

    International Nuclear Information System (INIS)

    Mortley, Aba; Bonin, H.W.; Bui, V.T.

    2007-01-01

    Thermally cured polyurethanes were prepared from castor oil and hexamethylene diisocyanate (HMDI). Due to the long aliphatic chain of the castor oil component of polyurethane, thermal curing of castor oil based polyurethane (COPU) is limited by increasing polymer viscosity. To enhance further crosslinking, COPUs were exposed to doses up to 3.0 MGy produced by the mixed ionizing radiation field of a SLOWPOKE-2 research nuclear reactor. The physico-mechanical properties of castor oil based polyurethanes (COPU), unirradiated and irradiated, were characterized by mechanical tensile tests. A four-fold increase in modulus and tensile strength values from 0.930 to 4.365 MPa and 0.149 to 0.747 MPa, respectively, suggests improved physico-mechanical properties resulting from radiation. The changing areas of the carbonyl and the NH absorbance peaks and the disappearance of the isocyanate peak in the FTIR spectra as radiation progressed, indicates increased hydrogen bonding and intermolecular crosslinking, which is in agreement with the mechanical tests. Unchanging 13 C solid state NMR spectra imply limited sample degradation with increasing radiation

  7. Film-forming properties of castor oil polyol ester blends in elastohydrodynamic conditions

    Science.gov (United States)

    The viscosities and elastohydrodynamic (EHD) film thickness properties of binary blends of castor oil with polyol esters were determined experimentally. Predicted blend viscosity was calculated from the viscosity of the pure blend components. Measured viscosity values were closer to the values pre...

  8. Antimicrobial action of sodium hypochlorite and castor oil solutions for denture cleaning - in vitro evaluation.

    Science.gov (United States)

    Salles, Marcela Moreira; Oliveira, Viviane de Cássia; Souza, Raphael Freitas; Silva, Cláudia Helena Lovato; Paranhos, Helena de Freitas Oliveira

    2015-01-01

    The objective of this in vitro study was to evaluate the antimicrobial action of sodium hypochlorite (0.25% and 0.50%) and 10% castor oil solutions against specific microorganisms, by counting Colony Forming Units (CFU) of clinically important bacteria and Candida species. Acrylic resin specimens (n = 320; Lucitone 550) were obtained from square metal matrices (10 x 10 x 2 mm), sterilized by microwave (650W, for 6 minutes) and contaminated by Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans, Bacillus subtilis, Escherichia coli, Streptococcus mutans, Enterococcus faecalis and Candida glabrata. The specimens were immersed for 20 minutes in one of the following hygiene solutions (n = 10/each): A - 0.25% Sodium hypochlorite; B - 0.5% Sodium hypochlorite; C - 10% Castor oil solution; and D (Control) - saline. Adhered cells were suspended and inoculated into a selective solid medium (37ºC for 24 h). The Student's t-test (α = 0.05) was performed to compare log10(CFU+1)/mL between Groups C and D. The results showed that sodium hypochlorite (0.25% and 0.5%) completely eliminated all detectable microorganisms. The castor oil solution eliminated B. subtilis and reduced counts for other strains. Differences between C and D were significant (p castor oil solution provided moderate efficacy and performed differently on the tested species, with the strongest effect on B. subtilis and with non-significant action on E. faecalis.

  9. The use of castor oil polyurethane foam in impact limiters for radioactive materials packages

    International Nuclear Information System (INIS)

    Mouro, R.P.; Neto, M.M.

    2003-01-01

    This paper presents ongoing research aiming to assess the use of a 'bio based' polyurethane foam as filling material in impact limiters for transport packages in the nuclear field. The foam is made from castor oil, which replaces the petroleum based polyols in the manufacture of polyurethane products, with good environmental advantages. The research comprises the selection of the cellular material, its structural characterisation by mechanical laboratory tests, the development of a case study, preliminary determination of the best foam density for the case study, performance of the case and its numerical simulation using the finite element method. Prototypes with foam density that is pre-determined as ideal, as well as prototypes using lighter and heavier foams, were tested for comparison. The results obtained validate the research methodology, as expectations about the ideal foam density were confirmed by the drop tests and the numerical simulation. (author)

  10. Detailed molecular characterization of castor oil ethoxylates by liquid chromatography multistage mass spectrometry.

    Science.gov (United States)

    Nasioudis, Andreas; van Velde, Jan W; Heeren, Ron M A; van den Brink, Oscar F

    2011-10-07

    The molecular characterization of castor oil ethoxylates (CASEOs) was studied by reverse-phase liquid chromatography (RPLC) mass spectrometry (MS) and multistage mass spectrometry (MS(n)). The developed RPLC method allowed the separation of the various CASEO components, and especially, the baseline separation of multiple nominal isobars (same nominal mass) and isomers (same exact mass). MS and MS(n) were used for the determination and structure elucidation of various structures and for the discrimination of the isobars and isomers. Different ionization techniques and adduct ions were also tested for optimization of the MS detection and the MS(n) fragmentation. A unique fragmentation pathway of ricinoleic acid is proposed, which can be used as a marker of the polymerization process and the topology of ethoxylation in the CASEO. In addition, characteristic neutral losses of ricinoleic acid reveal its (terminal or internal) position in the molecule. Copyright © 2011 Elsevier B.V. All rights reserved.

  11. A rapid method for evaluation of the oxidation stability of castor oil FAME: influence of antioxidant type and concentration

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Susana V.; Luna, F. Murilo T.; Rola, Estelio M. Jr.; Azevedo, Diana C.S.; Cavalcante, Celio L. Jr. [Universidade Federal do Ceara, Departamento de Engenharia Quimica, Grupo de Pesquisa em Separacoes por Adsorcao - GPSA, Campus do Pici, 709, Fortaleza, CE, 60.455-900 (Brazil)

    2009-10-15

    The oxidation stability of castor oil fatty methyl ester (FAME), doped with four different phenolic antioxidants, was evaluated using a rapid method of thermal and air-contact degradation. The methodology is based on the induction times observed when the samples are contacted with pure oxygen at elevated pressures and temperatures. The results indicate different performances of the antioxidants as well as synergisms between antioxidants and biodiesel. In general, the addition of antioxidants increased from 6-15 times the stability of castor oil FAME., with BHA (butylated hydroxyanisol) showing the best results for improving antioxidation in castor oil biodiesel. (author)

  12. Effect of castor oil emulsion eyedrops on tear film composition and stability.

    Science.gov (United States)

    Maïssa, Cécile; Guillon, Michel; Simmons, Peter; Vehige, Joseph

    2010-04-01

    An emulsion eyedrop containing castor oil has been shown to modify the tear film lipid layer and increase tear film stability. The primary objectives of this investigation were to measure the prevalence of castor oil in the tear fluid over time and quantify the effects on the lipid layer. A secondary objective was to quantify the initial effects on ocular symptomatology. The investigation was an open label pilot study on 5 normal and 10 dry eye subjects. A single eyedrop (Castor oil emulsion, Allergan) was instilled in each eye; the tear film appearance and composition were monitored for 4h via in vivo visualisation using the Tearscope and post in vivo tear samples analysis by HPLC. Combined results for both normal and dry eye subjects showed that castor oil was detected up to 4h after a single eyedrop instillation and associated with an increase in the level of tear film lipid. The relative amount of various lipid families was also changed. An increase in tear lipid layer thickness was significant up to one hour post-instillation for the symptomatic sub-population. The changes in tear film characteristics were associated with significantly lower symptoms up to four hours post-instillation for the symptomatic sub-population. This pilot investigation showed that castor oil eyedrops achieved a residence time of at least four hours post-instillation, producing a more stable tear film and an associated significant decrease in ocular symptoms over the entire follow-up period for the symptomatic subjects. 2009 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

  13. Experimental investigation on performance and exhaust emissions of castor oil biodiesel from a diesel engine.

    Science.gov (United States)

    Shojaeefard, M H; Etgahni, M M; Meisami, F; Barari, A

    2013-01-01

    Biodiesel, produced from plant and animal oils, is an important alternative to fossil fuels because, apart from dwindling supply, the latter are a major source of air pollution. In this investigation, effects of castor oil biodiesel blends have been examined on diesel engine performance and emissions. After producing castor methyl ester by the transesterification method and measuring its characteristics, the experiments were performed on a four cylinder, turbocharged, direct injection, diesel engine. Engine performance (power, torque, brake specific fuel consumption and thermal efficiency) and exhaust emissions were analysed at various engine speeds. All the tests were done under 75% full load. Furthermore, the volumetric blending ratios of biodiesel with conventional diesel fuel were set at 5, 10, 15, 20 and 30%. The results indicate that lower blends of biodiesel provide acceptable engine performance and even improve it. Meanwhile, exhaust emissions are much decreased. Finally, a 15% blend of castor oil-biodiesel was picked as the optimized blend of biodiesel-diesel. It was found that lower blends of castor biodiesel are an acceptable fuel alternative for the engine.

  14. Effect of fermentation period on the organic acid and amino acid contents of Ogiri from castor oil bean seeds

    Directory of Open Access Journals (Sweden)

    Ojinnaka, M-T. C.

    2013-01-01

    .Conclusion, significance and impact of study: Sufficient organic acids were detected in the three Bacillus fermented castor oil bean samples. The production of organic acids is undoubtedly the determining factor on which the shelf life and the safety of the final product depend while the inhibition of pathogenic and spoilage flora is also dependent on a rapid and adequate formation of these organic acids. The results of amino acid analysis indicated a high concentration of all amino acids especially at 96 h of fermentation. Amino acids are known to play a major role in the taste and flavour development of foods Thus the flavour and aroma of ogiri may be due to the production of amino acids, especially glutamic acid during the fermentation process.

  15. Characteristics and Composition of a High Oil Yielding Castor Variety from Pakistan.

    Science.gov (United States)

    Panhwar, Tarique; Mahesar, Sarfaraz Ahmed; Mahesar, Abdul Waheed; Kandhro, Aftab Ahmed; Talpur, Farah Naz; Laghari, Zahid Hussain; Chang, Abdul Sattar; Hussain Sherazi, Syed Tufail

    2016-01-01

    Keeping in view the versatile applications of castor oil in cosmetic, pharmaceutical and recently as renewable source, the present work is a step towards the commercialization of castor on large scale in Pakistan. The current study introduces a castor variety with high oil content. Initially seeds were physically examined for some physical parameters. Seed moisture, ash content and linear dimensions such as length, width and thickness were found to be 4.53%, 6.44%, 12.24 mm, 8.31 mm and 5.67 mm, respectively. For oil extraction, Soxhlet method was used which resulted in the high oil content 54.0%. For quality assessment of oil, physicochemical parameters were checked according to official standard AOCS methods and compared with ASTM specifications. The determined parameters were as follows; specific gravity 0.953 g/cm(-3), refractive index 1.431, viscosity 672.0 mPas.s, moisture content 0.32%, FFA 0.14%, IV 83.61 gI2/100 g, PV 2.25 meq/Kg and SV 186.0 mgKOH/g. Furthermore, fatty acid analysis of oil showed that, most abundant fatty acid was ricinoleic acid 94.59%, followed by palmitic 0.31%, linoleic 1.84%, oleic (n-9) 2.05%, oleic (n-10) 0.22%, stearic 0.45% and eicosenoic acid 0.53%. The detected fatty acids were compared with registered variety and varieties of other regions.

  16. Transesterification of triacetin and castor oil with methanol catalyzed by supported polyaniline-sulfate. A role of polymer morphology

    Czech Academy of Sciences Publication Activity Database

    Drelinkiewicz, A.; Kalemba-Jaje, Z.; Lalik, E.; Zieba, A.; Mucha, D.; Konyushenko, Elena; Stejskal, Jaroslav

    2013-01-01

    Roč. 455, 30 March (2013), s. 92-106 ISSN 0926-860X Institutional support: RVO:61389013 Keywords : transesterification * triacetin * castor oil Subject RIV: CD - Macromolecular Chemistry Impact factor: 3.674, year: 2013

  17. Efficiency of Castor Oil as a Storage Medium for Avulsed Teeth in Maintaining the Viability of Periodontal Ligament Cells.

    Science.gov (United States)

    Nabavizadeh, Mohammadreza; Abbaszadegan, Abbas; Khodabakhsi, Afrooz; Ahzan, Shamseddin; Mehrabani, Davood

    2018-03-01

    Researchers always seek a new storage medium for avulsed teeth. Castor oil is a vegetable oil with several advantages such as antimicrobial and antioxidant properties, low toxicity, and glutathione preservation capability, low cost, and high availability. The purpose of this study was to evaluate and compare the capacity of castor oil as a new storage medium in preserving the viability of periodontal ligament (PDL) cells compared to Hank's balanced salt solution (HBSS) and milk. Forty freshly extracted human teeth were divided into 3 experimental and 2 control groups. The experimental teeth were stored dry for 30 min and then immersed for 45 min in one of the following media; castor oil, HBSS, and milk. The positive and negative control groups were exposed to 0 min and 2 h of dry time respectively with no immersion in any storage medium. The teeth were then treated with dispase grade II and collagenase and the number of viable PDL cells were counted. Data were analyzed using Kruskal- Wallis test. The percentage of viable cells treated with castor oil, HBSS and milk counted immediately after removal from these media were 46.93, 51.02 and 55.10 % respectively. The statistical analysis revealed that the value for castor oil was significantly lower than HBSS and milk ( p > 0.05). Within the parameters of this study, it appears that castor oil cannot be served as an ideal medium for storage of avulsed tooth. More investigations under in vivo conditions are required to justify the results of this study.

  18. Pengaruh Konsentrasi Minyak Kelapa Murni (Virgin Coconut Oil) dan Minyak Jarak (Castor Oil) terhadap Sifat Fisikokimia dan Organoleptik Sabun Mandi Cair

    OpenAIRE

    Asri Widyasanti; Shayana Junita; Sarifah Nurjanah

    2017-01-01

    VCO contains of lauric acid that perform to smooth and to moisturize the skin. Castor oil has ricinoleic acid that serves to protect the skin. Therefore, both of the oil are suitable to be the raw material for liquid soap making. This study aimed were to produce a liquid soap, to determine the exact concentration of VCO and castor oil for liquid soap and to find out the effect of VCO and Castor Oil concentrations to the characteristics of liquid soap. The method used was laboratory experiment...

  19. Biodiesel production from castor oil using heterogeneous Ni doped ZnO nanocatalyst.

    Science.gov (United States)

    Baskar, G; Aberna Ebenezer Selvakumari, I; Aiswarya, R

    2018-02-01

    In the present study, castor oil with high free fatty acid was used for biodiesel production using heterogeneous Ni doped ZnO nanocatalyst. Ni doped ZnO nanocomposite calcinated at 800 °C has shown better catalytic activity. Process parameters on heterogeneous catalysis of castor oil into biodiesel were optimized using conventional and Response Surface Methodology (RSM). RSM was found more accurate in estimating the optimum conditions with higher biodiesel yield (95.20%). The optimum conditions for transesterification was found to be oil to methanol molar ratio of 1:8, catalyst loading 11% (w/w), reaction temperature of 55 °C for 60 min of reaction time by response surface method. The reusability studies showed that the nanocatalyst can be reused efficiently for 3 cycles. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Performance of compression ignition engine with indigenous castor oil bio diesel in Pakistan

    International Nuclear Information System (INIS)

    Chakrabarti, M.H.

    2009-01-01

    Castor oil available indigenously in Pakistan was converted successfully to bio diesel and blended to 10% quantity (by volume) with high speed mineral diesel (HSD) fuel. This fuel was tested in a compression-ignition engine in order to assess its environmental emissions as well as engine performance parameters. The blended fuel was found to give lower environmental emissions in most accounts except for higher CO/sub 2/ and higher NOx. In addition, three engine performance parameters were assessed; which were engine brake power, engine torque and exhaust temperature. In the first two cases, blended bio diesel fuel gave lower figures than pure mineral diesel due to lower calorific value. However, its higher flash point resulted in higher engine exhaust temperatures than pure mineral diesel. Overall, in terms of engine performance, castor oil bio diesel (from non edible oil of castor bean -growing on marginal lands of Pakistan) fared better in comparison to canola oil bio diesel (from expensive edible oil) and can be recommended for further tests at higher blend ratios. (author)

  1. Long-acting poly(DL:lactic acid-castor oil) 3:7-bupivacaine formulation: effect of hydrophobic additives.

    Science.gov (United States)

    Sokolsky-Papkov, Marina; Golovanevski, Ludmila; Domb, Abraham J; Weiniger, Carolyn F

    2011-12-01

    To reduce formulation viscosity of bupivacaine/poly(DL lactic acid co castor oil) 3:7 without increasing bupivacaine release rates. Poly(DL lactic acid) 3:7 was synthesized and bupivacaine formulation prepared by mixing with additives ricinoleic acid or castor oil. In vitro release measurements identified optimum formulation. Anesthetized ICR mice were injected around left sciatic nerve using nerve stimulator with 0.1 mL of formulation. Animals received 10% bupivacaine-polymer formulation with 10% castor oil (p(DLLA:CO)3:7-10% bupi-10% CO) or 15% bupivacaine-polymer with 10% castor oil (p(DLLA:CO)3:7-15% bupi-10% CO). Sensory and motor block were measured. Viscosity of 10% and 15% bupivacaine-p(DLLA:CO)3:7 formulations was reduced using hydrophobic additives; however, castor oil reduced bupivacaine release rates and eliminated burst effect. Less than 10% of the incorporated bupivacaine was released during 6 h, and less than 25% released in 24 h in vitro. In vivo formulation injection resulted in a 24 h motor block and a sensory block lasting at least 72 h. Incorporation of hydrophobic low-viscosity additive reduced viscosity in addition to burst release effects. Bupivacaine-polymer formulation with castor oil additive demonstrated prolonged sensory analgesia in vivo, with reduced duration of motor block.

  2. Comparative efficacy of combination of 1 L polyethylene glycol, castor oil and ascorbic acid versus 2 L polyethylene glycol plus castor oil versus 3 L polyethylene glycol for colon cleansing before colonoscopy: Study protocol of a randomized, double-blind, single-center study.

    Science.gov (United States)

    Tian, Xu; Chen, Wei-Qing; Liu, Xiao-Ling; Chen, Hui; Liu, Bang-Lun; Pi, Yuan-Ping

    2018-04-01

    Colonoscopy has been regarded as an important method of early diagnosing and treating gastrointestinal lesions; however adequate bowel preparation is critical one of many factors needed for successful colonoscopy. Although several modified or novel regimes have been developed, desired quality of bowel preparation has not yet been generated. Scattered evidences revealed that castor oil may have potential of effectively cleansing colon. It is noted that, however, prospective trial of exploring the value of castor oil in preparing bowel before colonoscopy is lacking. The aims of this study are to test the hypotheses that low dose castor oil (30 mL) may enhance potential of polyethylene glycol (PEG) and combination of low castor oil and ascorbic acid may halve the volume of PEG.This is a randomized, double-blind (endoscopist and assessor), single center trial with three-arm design. We will randomly assign 282 adult patients (≥18 years but castor oil or combination of 1 L PEG, 30 mL castor oil and 5 g ascorbic acid. The bowel preparation quality based on Boston Bowel Preparation Scale (BBPS) is the primary outcome. The secondary outcomes include the first defecation time, total number of defecation, time of cecal intubation, detection rate of polyp and adenoma, willing to repeat the same regime, tolerance to regime, and adverse events.The study protocol has been approved by the Clinical Research Ethics Committees of Chongqing University Cancer Hospital & Chongqing Cancer Institute & Chongqing Cancer Hospital & Chongqing Cancer Center (2017[107]). The results from this trial will be submitted for publication in peer-reviewed journals, and will be presented at national and international conferences.

  3. Synthesis and characterization of dialkanolamides from castor oil (Ricinus communis) as nonionic surfactant

    Science.gov (United States)

    Anwar, M.; Wahyuningsih, T. D.

    2017-12-01

    Nonionic surfactant of dialkanolamide derivates was synthesized and characterized from castor oil (Ricinus comunnis). Ricinoleic acid was isolated from castor oil by hydrolysis in alkaline (KOH) condition at 65 °C. Oxidation of ricinoleic acid by dilute potassium permanganate (KMnO4) in alkaline condition at 75-90 °C gave dicarboxylic acid which was then reacted with ethanolamine at 140-160 °C for 6 hours. The product was recrystallized with isopropanol, and the structure elucidation was performed by FTIR, 1HNMR spectrometer, and GC-MS with silylation method. Characterization of surfactants was carried out by surface tension measurement (capillary rise method), Critical Micelle Concentration (CMC) based on turbidity method and calculation of Hydrophilic-Lipophilic Balance (HLB) value with Griffin method and Bancroft rule. The result showed that ricinoleic acid in castor oil is 86.19 % and it is oxidation give an azelaic acid and octanedioic acid in 53.25 %. Amidation of a dicarboxylic acid and ethanolamine at 140-160 °C for 6 hours yielded of N1,N9-bis(2-hydroxyethyl)nona diamide in 49.35 %. Surfactant characterization indicates that dialkanolamide derivates can be used as a surfactant due to its ability to reduce the surface tension of ethanol with CMC at 1.2 g/L, HLB value is 5.58 and can be used as emulsifier water in oil (W/O).

  4. Mamona: determinação quantitativa do teor de óleo Quantitive determination of castor oil

    Directory of Open Access Journals (Sweden)

    Míriam Bottiglia Tambascia

    1986-01-01

    Full Text Available Foi desenvolvida uma metodologia para quantificar o teor de óleo em sementes de mamona, a partir da determinação do índice de refração de soluções etanólicas de diferentes concentrações a diferentes temperaturas. Os resultados mostraram um comportamento linear entre índice de refração e concentração de óleo para cada temperatura, com um excelente coeficiente de correlação, permitindo, assim, a quantificação do teor de óleo de mamona por metodologia bastante rápida e precisa.A methodology was developed to quantify the castor oil seed content, through the determination of refractive index of ethanolic solutions with different oil concentrations and temperatures. The results showed a nearly linear relationship between the refractive index and oil concentration for each temperature. This correlation permits to quantify castor oil content of ethanolic solutions by calculation from the quickly and accurate measurement of refractive index.

  5. The mixture of cashew nut shell liquid and castor oil results in an efficient larvicide against Aedes aegypti that does not alter embryo-fetal development, reproductive performance or DNA integrity.

    Directory of Open Access Journals (Sweden)

    Juliana Miron Vani

    Full Text Available Dengue fever, chikungunya fever and Zika virus are epidemics in Brazil that are transmitted by mosquitoes, such as Aedes aegypti or Aedes albopictus. The liquid from shells of cashew nuts is attractive for its important biological and therapeutic activities, which include toxicity to mosquitoes of the genus Aedes. The present study evaluated the effects of a mixture of surfactants from natural cashew nutshell liquid and castor oil (named TaLCC-20 on the mortality of larvae and on the reproductive performance, embryonic and fetal development and genetic stability of Swiss mice. A total of 400 Ae. aegypti larvae (third larval stage were treated with TaLCC-20 concentrations of 0.05 mg/L, 0.5 mg/L, or 5 mg/L (ppm. Twenty pregnant female mice were also orally administered TaLCC-20 at doses of 5 mg/kg and 50 mg/kg body weight (b.w., and 10 animals were given only drinking water at 0.1 mL/10 g b.w. (orally. The results of a larvicide test demonstrated that 5 mg/mL TaLCC-20 killed 100% of larvae within three hours, which is comparable to the gold standard indicated by the Ministry of Health. Overall, these results show that TaLCC-20 is an efficient larvicide that does not induce genetic damage. In addition, changes in reproductive performance and embryo-fetal development appear positive, and the formulation is cost effective. Therefore, TaLCC-20 is an important product in the exploration of natural larvicides and can assist in fighting mosquitos as vectors for dengue fever, chikungunya fever and Zika virus, which are emerging/re-emerging and require proper management to ensure minimal harm to the human population. Therefore, TaLCC-20 can be considered a key alternative to commercial products, which are effective yet toxigenic.

  6. ROMP-based thermosetting polymers from modified castor oil with various cross-linking agents

    Science.gov (United States)

    Ding, Rui

    Polymers derived from bio-renewable resources are finding an increase in global demand. In addition, polymers with distinctive functionalities are required in certain advanced fields, such as aerospace and civil engineering. In an attempt to meet both these needs, the goal of this work aims to develop a range of bio-based thermosetting matrix polymers for potential applications in multifunctional composites. Ring-opening metathesis polymerization (ROMP), which recently has been explored as a powerful method in polymer chemistry, was employed as a unique pathway to polymerize agricultural oil-based reactants. Specifically, a novel norbornyl-functionalized castor oil alcohol (NCA) was investigated to polymerize different cross-linking agents using ROMP. The effects of incorporating dicyclopentadiene (DCPD) and a norbornene-based crosslinker (CL) were systematically evaluated with respect to curing behavior and thermal mechanical properties of the polymers. Isothermal differential scanning calorimetry (DSC) was used to investigate the conversion during cure. Dynamic DSC scans at multiple heating rates revealed conversion-dependent activation energy by Ozawa-Flynn-Wall analysis. The glass transition temperature, storage modulus, and loss modulus for NCA/DCPD and NCA/CL copolymers with different cross-linking agent loading were compared using dynamic mechanical analysis. Cross-link density was examined to explain the very different dynamic mechanical behavior. Mechanical stress-strain curves were developed through tensile test, and thermal stability of the cross-linked polymers was evaluated by thermogravimetric analysis to further investigate the structure-property relationships in these systems.

  7. Production and characterization of MDF using eucalyptus fibers and castor oil-based polyurethane resin

    Directory of Open Access Journals (Sweden)

    Campos Cristiane Inácio de

    2004-01-01

    Full Text Available The growing popularity of wooden panels renders this market segment increasingly competitive. MDF (Medium Density Fiberboard, in particular, is widely employed for a variety of applications, including civil construction, furniture, and packaging. This paper discusses a study of MDF produced from alternative raw materials, i.e., Eucalyptus fibers and castor-oil-based polyurethane resin. Physical and mechanical tests were performed to determine the MDF's modulus of elasticity and modulus of rupture in static bending tests, its swelling, water absorption, moisture and density. The results of the physical and mechanical characterization of this laboratory-produced MDF are discussed and compared with the Euro MDF Board standard. MDF produced with eucalyptus fiber and castor-oil-based polyurethane resin presents results very satisfactory.

  8. Low density polyethylene (LDPE) / poli (3-hydroxy-butyrate) (PHB) blends filled with castor oil cake

    International Nuclear Information System (INIS)

    Rocha, M.C.G.; Oliveira, C.I.R. de; Sanches, M.C.; Coelho, N.N.

    2014-01-01

    Blends of PHB and LDPE were prepared by melt mixing in a Haake internal mixer. Castor oil pressed cake was used as filler for the blends. In order to improve the interfacial adhesion between the filler and the polymers, a mercerization process with 5% NaOH solution was employed. This process was evaluated by several techniques such as: X-Ray diffraction, infrared spectroscopy and scanning electron microscopy (SEM). The mechanical properties were evaluated by traditional tensile stress-strain tests (ASTM D- 638). The obtained results showed that the mercerization process leads to better adhesion properties. The Young Modulus of the blends presented a tendency to increase with the addition of the castor oil cake.(author)

  9. Influence of MgO on Performance and Emissions of DI Engine using blends of Castor oil

    Science.gov (United States)

    Ganesan, S.; Padmanabhan, s.; Senthil kumar, J.; Polina, Navakanth; Krishna kumar, Sanivada

    2017-05-01

    With the technological development, the research over alternate fuels is increasing day by day in order to help the upcoming generation with a bright and greener future. In order to preserve the existing petroleum resources for future generation, it is necessary to soon switch to any alternate source which is easily available, renewable as well as environment friendly. In this paper I would like to highlight upon the usage of Diesel, Castor Oil and Nano Particles for a compression ignition engine and study the emission characteristics of this fuel at different mixing ratios and analyze the different levels of residue particles.

  10. Biodiesel Production from Castor Oil by Using Calcium Oxide Derived from Mud Clam Shell

    OpenAIRE

    Ismail, S.; Ahmed, A. S.; Anr, Reddy; Hamdan, S.

    2016-01-01

    The catalytic potential of calcium oxide synthesized from mud clam shell as a heterogeneous catalyst for biodiesel production was studied. The mud clam shell calcium oxide was characterized using particle size analyzer, Fourier transform infrared spectroscopy, scanning electron microscopy, and BET gas sorption analyzer. The catalyst performance of mud clam shell calcium oxide was studied in the transesterification of castor oil as biodiesel. Catalyst characterization and transesterification s...

  11. Antimicrobial action of sodium hypochlorite and castor oil solutions for denture cleaning – in vitro evaluation

    Directory of Open Access Journals (Sweden)

    Marcela Moreira SALLES

    2015-01-01

    Full Text Available The objective of this in vitro study was to evaluate the antimicrobial action of sodium hypochlorite (0.25% and 0.50% and 10% castor oil solutions against specific microorganisms, by counting Colony Forming Units (CFU of clinically important bacteria and Candida species. Acrylic resin specimens (n = 320; Lucitone 550 were obtained from square metal matrices (10 x 10 x 2 mm, sterilized by microwave (650W, for 6 minutes and contaminated by Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans, Bacillus subtilis, Escherichia coli, Streptococcus mutans, Enterococcus faecalisand Candida glabrata. The specimens were immersed for 20 minutes in one of the following hygiene solutions (n = 10/each: A – 0.25% Sodium hypochlorite; B – 0.5% Sodium hypochlorite; C – 10% Castor oil solution; and D (Control – saline. Adhered cells were suspended and inoculated into a selective solid medium (37ºC for 24 h. The Student’s t-test (α = 0.05 was performed to compare log10(CFU+1/mL between Groups C and D. The results showed that sodium hypochlorite (0.25% and 0.5% completely eliminated all detectable microorganisms. The castor oil solution eliminatedB. subtilisand reduced counts for other strains. Differences between C and D were significant (p E. faecalis. Both sodium hypochlorite solutions (0.25% and 0.5% were effective in eliminating all microorganisms evaluated, and may be useful as cleaning solutions for complete dentures. The castor oil solution provided moderate efficacy and performed differently on the tested species, with the strongest effect on B. subtilis and with non-significant action on E. faecalis.

  12. Characterization of adhesive of polyurethane from castor oil by FTIR, TGA and XRD

    International Nuclear Information System (INIS)

    Azevedo, Elaine C.; Santana, Simone S. de M.; Nascimento, Eduardo M. do; Claro Neto, Salvador; Lepienski, Carlos M.

    2009-01-01

    Castor oil polyurethanes are an alternative to adhesives that emanate volatile compounds. This adhesive come from a renewable source and has very low toxicity. In this work the microstructural and thermal characterization is presented. This material is partially crystalline. The mass loss start at 240 deg C and the glass transition temperature is 60 deg C. Then the adhesive is adequate to be employed at temperatures lower than 60 deg C. (author)

  13. Glutathione Preservation during Storage of Rat Lenses in Optisol-GS and Castor Oil

    DEFF Research Database (Denmark)

    Holm, Thomas; Brøgger-Jensen, Martin Rocho; Johnson, Leif

    2013-01-01

    Glutathione concentration in the lens decreases in aging and cataractous lenses, providing a marker for tissue condition. Experimental procedures requiring unfrozen lenses from donor banks rely on transportation in storage medium, affecting lens homeostasis and alterations in glutathione levels. ....... The aim of the study was to examine the effects of Optisol-GS and castor oil on lens condition, determined from their ability to maintain glutathione concentrations....

  14. Cadmium sulfide quantum dots stabilized by castor oil and ricinoleic acid

    Science.gov (United States)

    Kyobe, Joseph William; Mubofu, Egid Beatus; Makame, Yahya M. M.; Mlowe, Sixberth; Revaprasadu, Neerish

    2016-02-01

    Castor oil and ricinoleic acid (an isolate of castor oil) are environmentally friendly bio-based organic surfactants that have been used as capping agents to prepare nearly spherical cadmium sulfide quantum dots (QDs) at 230, 250 and 280 °C. The prepared quantum dots were characterized by Ultra violet-visible (UV-vis), Photoluminescence (PL), Transmission Electron Microscopy (TEM), High Resolution Transmission Electron Microscopy (HRTEM) and X-ray diffraction (XRD) giving an overall CdS QDs average size of 5.14±0.39 nm. The broad XRD pattern and crystal lattice fringes in the HRTEM images showed a hexagonal phase composition of the CdS QDs. The calculated/estimated average size of the prepared castor oil capped CdS QDs for various techniques were 4.64 nm (TEM), 4.65 nm (EMA), 5.35 nm (UV-vis) and 6.46 nm (XRD). For ricinoleic acid capped CdS QDs, the average sizes were 5.56 nm (TEM), 4.78 nm (EMA), 5.52 nm (UV-vis) and 8.21 nm (XRD). Optical properties of CdS QDs showed a change of band gap energy from its bulk band gap of 2.42-2.82 eV due to quantum size confinement effect for temperature range of 230-280 °C. Similarly, a blue shift was observed in the photoluminescence spectra. Scanning electron microscope (SEM) observations show that the as-synthesized CdS QDs structures are spherical in shape. Fourier transform infra-red (FTIR) studies confirms the formation of castor oil and ricinoleic acid capped CdS QDs.

  15. Characterization and Digestibility of Detoxified Castor Oil Meal for Japanese Quails

    OpenAIRE

    Santos,PA dos; Ludke,MCMM; Ludke,JV; Rabello,CBV; Santos,MJB dos; Torres,TR

    2015-01-01

    ABSTRACT These experiments were performed to determine the chemical composition, coefficients of nutrient and energy metabolizability, amino acid composition, and cytotoxicity of different castor oil meals subjected to different detoxification processes and added to the diet of Japanese quails. In the trial, 180 46-d-old female Japanese quails were distributed according to a completely randomized design into five treatments and with replicates of six bird each. The treatments consisted of fol...

  16. Optimization of Mechanical Expression of Castor Seeds Oil (Ricinus communis using Response Surface Methodology

    Directory of Open Access Journals (Sweden)

    J. O. Olaoye

    2017-12-01

    Full Text Available The effect of the processing parameters of Castor seed on its oil yield was investigated. The castor seeds were passed through drying, crushing and separation into seeds and shells. These processing conditions were further succeeded by seed roasting and subsequent mechanical expression of the roasted nut by means of screw press in the course of its preparation for oil expression. Seed samples were conditioned by adding calculated amount of distilled water to obtain different moisture levels from the initial moisture content of the seeds. Samples were roasted at the temperatures of 83.18, 90.00, 100.00, 110.00 and 116.82°C, over periods of 6.59, 10.00, 15.00, 20.00 and 23.41min, seed moisture content of 6.32, 7.00, 8.00, 9.00 and 9.68 % wb, respectively and the oil was expressed using a screw roaster-expeller. Optimization of the oil expression process was achieved by applying Central Composite Rotatable Design of Response Surface Methodology. The optimal conditions for oil yield within the experimental range of the studied variables were 7%, 110°C and 20 min; moisture content, roasting temperature and roasting duration respectively. These values of the optimum process conditions were used to predict optimum value of oil yield to be 25.77%. A second-order model was obtained to predict oil yield as a function of moisture content, heating temperature and duration. Thus the result from this research work has established the optimal conditions for mechanical extraction of oil from castor seed. Closed agreement between experimental and predicted yield was obtained.

  17. UV and gamma irradiation effects on surface properties of polyurethane derivative from castor oil

    International Nuclear Information System (INIS)

    Azevedo, Elaine C.; Nascimento, Eduardo M.; Chierice, Gilberto O.; Claro Neto, Salvador

    2013-01-01

    Gamma and ultraviolet radiation effects on hardness, elastic modulus and viscoelastic properties of polyurethane derived from castor oil (PU) were investigated by nanoindentation tests. Modifications on surface morphology, induce by radiation, were observed by atomic force microscopy. The polyurethane derivative from castor oil shows good resistance to gamma radiation, with only small changes in hardness, elastic modulus, viscoelastic properties and contact angle. The hardness of PY increases at the near surface region due to UVA radiation and decreases after UVC radiation. The contact angle for water drop decreases after UVC radiation, by not after gamma radiation, despite a significant increase in roughness. Such results are attributed to different responses from polyurethane to radiation energy. Increase in hardness due to UVA is attributed to a higher crosslinking at shallow depths, while a decrease in mechanical properties may be attributed to chain scission. These results are consistent with the modifications on viscoelastic properties. Shore D hardness did not show the same trend as observed by nanoindentation results. Hardness, viscoelastic properties and contact angle of castor oil polyurethane are more severely influenced by UVC radiation, while gamma radiation does not have a significant effect. (author)

  18. UV and gamma irradiation effects on surface properties of polyurethane derivative from castor oil

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Elaine C.; Nascimento, Eduardo M., E-mail: helunica@yahoo.com.br [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Chierice, Gilberto O.; Claro Neto, Salvador [Universidade de Sao Paulo (IQSC/USP), Sao Carlos, SP (Brazil). Instituto de Quimica; Lepienski, Carlos M. [Universidade Federal do Parana (UFPR), Curitiba (Brazil)

    2013-07-01

    Gamma and ultraviolet radiation effects on hardness, elastic modulus and viscoelastic properties of polyurethane derived from castor oil (PU) were investigated by nanoindentation tests. Modifications on surface morphology, induce by radiation, were observed by atomic force microscopy. The polyurethane derivative from castor oil shows good resistance to gamma radiation, with only small changes in hardness, elastic modulus, viscoelastic properties and contact angle. The hardness of PY increases at the near surface region due to UVA radiation and decreases after UVC radiation. The contact angle for water drop decreases after UVC radiation, by not after gamma radiation, despite a significant increase in roughness. Such results are attributed to different responses from polyurethane to radiation energy. Increase in hardness due to UVA is attributed to a higher crosslinking at shallow depths, while a decrease in mechanical properties may be attributed to chain scission. These results are consistent with the modifications on viscoelastic properties. Shore D hardness did not show the same trend as observed by nanoindentation results. Hardness, viscoelastic properties and contact angle of castor oil polyurethane are more severely influenced by UVC radiation, while gamma radiation does not have a significant effect. (author)

  19. Transesterification of castor oil usingMgO/SiO2 catalyst and coconutoilas co-reactant

    OpenAIRE

    Kamisah D. Pandiangan; Novesar Jamarun; Syukri Arief; Wasinton Simanjuntak

    2016-01-01

    This paper describes the transesterification of castor oil with the use of coconut oil as co-reactant and MgO/SiO2as heterogeneous base catalyst. The catalyst was preparedfrom rice husk silica and magnesium nitrate by sol-gel method, with MgO load of 20% relative to silica, and then subjected to sintering treatment at 600 oC for 6 hours. A series of experiments was carried out, indicating that the use of coconut oil as co-reactant significantly promoted the conversion of castor oil into b...

  20. Analysis of the gamma radiation effects in the composite of polyurethane derived from castor oil and natural fibers

    International Nuclear Information System (INIS)

    Kienen, Victor D.; Todt, Matheus L.; Capellari, Giovanni S.; Azevedo, Elaine C.; Neto, Salvador C.

    2015-01-01

    Composite of Polyurethane derived from castor oil and natural fibers are obtained from renewable raw material, low cost, and for not assaulting nature. This paper analyzes the effects of gamma radiation on composite polyurethane derived from castor with sawdust irradiated with gamma radiation of 25 kGy . It was held from 3 tips bending tests and micrograph by scanning electron microscopy. The results indicate that gamma radiation decreases the breakdown voltage and the micrograph of the fracture indicates brittle fracture occurred. (author)

  1. Synthesis of biodiesel from castor oil: Silent versus sonicated methylation and energy studies

    International Nuclear Information System (INIS)

    Sáez-Bastante, J.; Pinzi, S.; Jiménez-Romero, F.J.; Luque de Castro, M.D.; Priego-Capote, F.; Dorado, M.P.

    2015-01-01

    Highlights: • Sonicated transesterification leads to higher conversion than conventional one. • Energy consumption required by conventional and ultrasound-assisted transesterification was compared. • Ultrasound-assisted methylation is more competitive in terms of energy than conventional one. - Abstract: In recent years, biodiesel is evolving to be one of the most employed biofuels for partial replacement of petrodiesel. The most widely used feedstocks for biodiesel production are vegetable oils. Among them, castor oil presents two interesting features as biodiesel raw material; on one hand, it does not compete with edible oils; on the other, the cultivar does not require high inputs. In this research, a comparison between conventional and ultrasound-assisted transesterification was carried out in terms of castor oil methyl ester (COME) yield and energy efficiency. Results show that sonicated transesterification leads to higher COME yields under lower methanol-to-oil molar ratio, lower amount of catalyst, shorter reaction time and lower amount of energy required. Ultrasound-assisted transesterification parameters were optimized resulting in the following optimum conditions: 20 kHz fixed frequency, 70% duty cycle, 40% sonication amplitude, 4.87 methanol-to-oil molar ratio, 1.4% w/w amount of catalyst and 3 sonication cycles (3 min 48 s) that provided 86.57% w/w COME yield. The energy required along each type of transesterification was measured leading to the conclusion that sonicated transesterification consumes a significant lower amount of energy than conventional one, thus achieving higher COME yield

  2. Mechanical evaluation of bone gap filled with rigid formulations castor oil polyurethane and chitosan in horses

    Directory of Open Access Journals (Sweden)

    Rodrigo Crispim Moreira

    Full Text Available ABSTRACT: Often fractures of long bones in horses are comminuted and form bone gaps, which represent a major challenge for the fixation of these fractures by loss of contact between the fragments. Bone grafts help in treating this kind of fracture and synthetic materials have been gaining ground because of the limitations of autologous and heterologous grafts. In this study were performed compressive non destructive test in 10 bones with complete cross-bone gap in mid-diaphyseal of the third metacarpal bone of horses. Using a mechanism of "crossing" the 10 bones were used in the three groups (control, castor oil poliuretane and chitosan according to the filling material. After the test with maximum load of 1000N bone had a gap filled by another material and the test was repeated. Deformations caused on the whole bone, plate and bone tissue near and distant of gap were evaluated, using strain gauges adhered to the surface at these locations. There was a reduction in bone deformation from 14% (control to 3,5% and 4,8% by filling the gap with Chitosan and castor oil respectively, and a reduction of strain on the plate of 96% and 85% by filling gap with chitosan and castor respectively. An increase in intensity and direction of deformations occurred in bone near to gap after its filling; however, there was no difference in bone deformations occurring far the gap.

  3. Collection of castor-oil plant germoplasm (Ricinus communis L. in two municipalities of Arauca, Colombia

    Directory of Open Access Journals (Sweden)

    Carlos Iván Cardozo Conde

    2013-05-01

    Full Text Available Ricinus communis L., commonly known as the castor-oil plant, is important for its use in biofuels production. With the objective of learning about its current status, in 40 villages influential to the oil complex of Caricare (municipality of Arauquita and Caño Limón (municipality of Arauca in Arauca, Colombia (where five years earlier the crop had been established, a collection of sexual seed was carried out between December 2011 and January 2012. The variables studied include passport data as a collection resource, local name, relief, and soil type among others. A Garmin map76CSx was used in order to identify the transects and record data such as geographic location and elevation. Simple descriptive statistics were used to identify the variables of greatest variation. Using the qualitative variables of greatest importance, a contingency table analysis with a significance level of 5%, a multiple correspondence analysis (MCA and principal component analysis (PCA were performed for quantitative and qualitative variables, in addition to a classification analysis through a similarity matrix. The castor-oil plant was found in 25% of the villages visited. 12 introductions were collected, four from Caricare and eight from Caño Limón. Although the environmental conditions were favo­rable for its cultivation, there are no castor-oil plant crops in the locations visited. The absence of grain commercialization and oil extraction equipment is the main limiting factor. A garden was established using collected materials for the purpose of research, breeding and propagation.

  4. Evaluation of reaction mechanisms and the kinetic parameters for the transesterification of castor oil by liquid enzymes

    DEFF Research Database (Denmark)

    Andrade, Thalles Allan; Errico, Massimiliano; Christensen, Knud Villy

    2017-01-01

    of the transesterification of castor oil with methanol using the enzyme Eversa® Transform as catalyst were investigated. Reactions were carried out for 8 hours at 35 °C with: an alcohol-to-oil molar ratio equal to 6:1, a 5 wt% of liquid enzyme solution and addition of 5 wt% of water by weight of castor oil. From...... methanolysis rates of glycerides obtained, indicated that transesterification dominates over hydrolysis. The mechanism among the four models proposed that gave the best fit could be simplified, eliminating the kinetic parameters with negligible effects on the reaction rates. This model was able to fit...

  5. Energetic balance of castor oil methyl and ethyl esters; Balanco energetico de esteres metilicos e etilicos de oleo de mamona

    Energy Technology Data Exchange (ETDEWEB)

    Almeida Neto, Jose Adolfo de; Cruz, Rosenira Serpa da; Alves, Jaenes Miranda; Pires, Monica de Moura; Robra, Sabine [Universidade Estadual de Santa Cruz, Ilheus BA (Brazil). Grupo Bioenergia e Meio Ambiente]. E-mails: jalmeida@uesc.br; Parente Junior, Expedito [Tecnologias Bioenergeticas Ltda. (TECBIO), Fortaleza, CE (Brazil); Fundacao Nucleo de Tecnologia Industrial (NUTEC), Fortaleza, CE (Brazil)]. E-mail: expeditojr@tecbio.com.br

    2004-07-01

    Castor oil (Ricinus communis L.) is one of the cultures chosen by the biodiesel federal and state programs to supply raw material for biodiesel production - a biofuel indicated as renewable and less pollutant than its fossil competitor. An energetic balance was performed based on LCA - Life Cycle Analysis principles and Input-Output Analysis, comparing the castor oil energy performance with others traditional cultures: colza (Brassica napus) in Europe and soybean (Glycine max) in the United States. Energy balance (O-I) was positive in both production ways (methyl and ethyl) independent of coproduct use allocation alternative. The relation Output-Input (O-I) calculated for castor oil biodiesel [1.3-2.9] was higher than the colza (1.2-1.9) and lower than the soybean (3.2--3.4), independent of the way and allocation of the used byproduct. Both indicators suggest the energy and environmental viability of the castor oil biodiesel, provided that high agricultural productivity (higher than 1.500 kg/ha year) can be guaranteed. The potentialization of the positive energetic and environmental effects depends on the adequate utilization of the coproducts and process residues, the improvement of the energy efficiency in the the castor oil and biodiesel processing and the implementation of efficient management in the use of the chemical inputs (specially the N), responsible for up 5% of the total energy input.

  6. Simple Synthesis Hydrogenated Castor Oil Fatty Amide Wax and Its Coating Characterization.

    Science.gov (United States)

    Yu, Xiuzhu; Wang, Ning; Zhang, Rui; Zhao, Zhong

    2017-07-01

    A simple method for incorporating amine groups in hydrogenated castor oil (HCO) to produce wax for beeswax or carnauba wax substitution in packaging and coating was developed. From the conversion rate of the products, HCO was reacted with ethanolamine at 150°C for 5 h, and the molar ratio of HCO and ethanolamine was 1:4. The hardness of the final product was seven times higher than that of beeswax, the cohesiveness of the final product was 1.3 times higher than that of beeswax and approximately one half of that of carnauba wax, and the melting point of the final product is 98°C. The Fourier transform Infrared spectroscopy showed that the amide groups were incorporated to form the amide products. In coating application, the results showed that the force of the final product coating cardboard was higher than that of beeswax and paraffin wax and less than that of carnauba wax. After 24 h soaking, the compression forces were decreased. HCO fatty acid wax can be an alternative wax for carnauba wax and beeswax in coating applications.

  7. Bio-inspired hydrophobic modification of cellulose nanocrystals with castor oil.

    Science.gov (United States)

    Shang, Qianqian; Liu, Chengguo; Hu, Yun; Jia, Puyou; Hu, Lihong; Zhou, Yonghong

    2018-07-01

    This work presents an efficient and environmentally friendly approach to generate hydrophobic cellulose nanocrystals (CNC) using thiol-containing castor oil (CO-SH) as a renewable hydrophobe with the assist of bio-inspired dopamine at room temperature. The modification process included the formation of the polydopamine (PDA) buffer layer on CNC surfaces and the Michael addition reaction between the catechol moieties of PDA coating and thiol groups of CO-SH. The morphology, crystalline structure, surface chemistry, thermal stability and hydrophobicity of the modified CNC were charactered by TEM, XRD, FT-IR, solid-state 13 C NMR, XPS, TGA and contact angle analysis. The modified CNC preserved cellulose crystallinity, displayed higher thermal stability than unmodified CNC, and was highly hydrophobic with a water contact angle of 95.6°. The simplicity and versatility of the surface modification strategy inspired by adhesive protein of mussel may promote rapid development of hydrophobic bio-based nanomaterials for various applications. Copyright © 2018 Elsevier Ltd. All rights reserved.

  8. Anti-diarrhea activity of the aqueous root bark extract of Byrsocarpus coccineus on castor oil-induced diarrhea in Wistar rats.

    Science.gov (United States)

    Ejeh, Sunday A; Onyeyili, Patrick; Abalaka, Samson E

    2017-07-01

    The use of traditional medicine as an alternative source of cure for many ailments has played an important role in health care delivery in both developing and developed countries. Byrsocarpus coccineus Schum and Thonn ( Connaraceae ) is used in traditional medicine for treatment of various disease conditions, including diarrhea. The anti-diarrhea activity of the root bark aqueous extract of B. coccineus was investigated in this study. Acute toxicity evaluation of the aqueous extract of B. coccineus root bark was performed in exposed rats. Diarrhea was induced in exposed rats with castor oil, and the effect of the extract on castor oil-induced gastrointestinal motility and enteropooling was consequently investigated. In the acute toxicity study, the extract caused no death in treated rats nor produced signs of delayed toxicity, even at 5000 mg/kg. The aqueous root bark extract of B. coccineus also decreased the distance travelled by activated charcoal in the gastrointestinal tract of treated rats when compared to control rats. Results of castor oil-induced enteropooling revealed slight reduction in the weight of intestinal contents of treated rats compared to control rats. There was significant (pcastor oil-induced diarrhea at 100 mg/kg dose with 74.96% inhibition of defecation. The study demonstrated the anti-diarrheic property of the aqueous extract of B. coccineus root bark as currently exploited in our traditional herbal therapy.

  9. Performance of maleated castor oil based plasticizer on rubber: rheology and curing characteristic studies

    Science.gov (United States)

    Indrajati, I. N.; Dewi, I. R.

    2017-07-01

    The objective of this study was to evaluate the performance of maleated castor oil (MACO) as plasticizer on natural rubber (NR), ethylene propylene diene monomer (EPDM), and nitrile butadiene rubber (NBR). The parameter studied were involving rheological, curing and swelling properties. The MACOs were prepared by an esterification reaction between castor oil (CO) and maleic anhydride (MAH) with the help of xylene as water entrainer to improve water removal. Resulting oils then applied as a plasticizer in each of those rubbers within a fixed loading of 5 phr. Comparison has been made to evaluate the performance of MACO and conventional plasticizer (paraffinic oil for NR and EPDM, DOP for NBR) on each rubber. Rheology, curing characteristic and swelling of each rubber were studied. The results showed that rubber (NR/EPDM/NBR) plasticized with MACO had given similar flow characteristic to conventional plasticizers. MACO exhibited slow curing, confirmed by higher t90, but the scorch safety was of the same magnitude. MAH loading tended to decrease the flow properties and curing rate, while scorch time (ts2) was independent.

  10. Glutathione preservation during storage of rat lenses in optisol-GS and castor oil.

    Science.gov (United States)

    Holm, Thomas; Brøgger-Jensen, Martin Rocho; Johnson, Leif; Kessel, Line

    2013-01-01

    Glutathione concentration in the lens decreases in aging and cataractous lenses, providing a marker for tissue condition. Experimental procedures requiring unfrozen lenses from donor banks rely on transportation in storage medium, affecting lens homeostasis and alterations in glutathione levels. The aim of the study was to examine the effects of Optisol-GS and castor oil on lens condition, determined from their ability to maintain glutathione concentrations. Rat lenses were stored in the two types of storage media at varying time intervals up to 3 days. Glutathione concentration was afterwards determined in an enzymatic detection assay, specific for both reduced and oxidized forms. Lenses removed immediately after death exhibited a glutathione concentration of 4.70±0.29 mM. In vitro stored lenses in Optisol-GS lost glutathione quickly, ending with a concentration of 0.60±0.34 mM after 3 days while castor oil stored lenses exhibited a slower decline and ended at 3 times the concentration. A group of lenses were additionally stored under post mortem conditions within the host for 6 hours before its removal. Total glutathione after 6 hours was similar to that of lenses removed immediately after death, but with altered GSH and GSSG concentrations. Subsequent storage of these lenses in media showed changes similar to those in the first series of experiments, albeit to a lesser degree. It was determined that storage in Optisol-GS resulted in a higher loss of glutathione than lenses stored in castor oil. Storage for more than 12 hours reduced glutathione to half its original concentration, and was considered unusable after 24 hours.

  11. Microbial degradation, cytotoxicity and antibacterial activity of polyurethanes based on modified castor oil and polycaprolactone.

    Science.gov (United States)

    Uscátegui, Yomaira L; Arévalo, Fabián R; Díaz, Luis E; Cobo, Martha I; Valero, Manuel F

    2016-10-11

    The objective of this study was to assess the effects of type of polyol and concentration of polycaprolactone (PCL) in polyurethanes (PUs) on microbial degradability, cytotoxicity, biological properties and antibacterial activity to establish whether these materials may have biomedical applications. Chemically modified and unmodified castor oil, PCL and isophorone diisocyanate in a 1:1 ratio of NCO/OH were used. PUs were characterized by stress/strain fracture tests and hardness (ASTM D 676-59). Hydrophilic character was determined by contact angle trials and morphology was evaluated by scanning electron microscopy. Degradability with Escherichia coli and Pseudomonas aeruginosa was evaluated by measuring variations in the weight of the polymers. Cytotoxicity was evaluated using the ISO 10993-5 (MTT) method with mouse embryonic fibroblasts L-929 (ATCC® CCL-1) in direct contact with the PUs and with NIH/3T3 cells (ATCC® CRL-1658) in indirect contact with the PUs. Antimicrobial activity against E. coli and P. aeruginosa was determined. PUs derived from castor oil modified (P0 and P1) have higher mechanical properties than PUs obtained from castor oil unmodified (CO). The viability of L-929 mouse fibroblasts in contact with polymers was greater than 70%. An assessment of NIH/3T3 cells in indirect contact with PUs revealed no-toxic degradation products. Finally, the antibacterial effect of the PUs decreased by 77% for E. coli and 56% for P. aeruginosa after 24 h. These results indicate that PUs synthesized with PCL have biocidal activity against Gram-negative bacteria and do not induce cytotoxic responses, indicating the potential use of these materials in the biomedical field.

  12. Glutathione preservation during storage of rat lenses in optisol-GS and castor oil.

    Directory of Open Access Journals (Sweden)

    Thomas Holm

    Full Text Available BACKGROUND: Glutathione concentration in the lens decreases in aging and cataractous lenses, providing a marker for tissue condition. Experimental procedures requiring unfrozen lenses from donor banks rely on transportation in storage medium, affecting lens homeostasis and alterations in glutathione levels. The aim of the study was to examine the effects of Optisol-GS and castor oil on lens condition, determined from their ability to maintain glutathione concentrations. METHODOLOGY/PRINCIPAL FINDINGS: Rat lenses were stored in the two types of storage media at varying time intervals up to 3 days. Glutathione concentration was afterwards determined in an enzymatic detection assay, specific for both reduced and oxidized forms. Lenses removed immediately after death exhibited a glutathione concentration of 4.70±0.29 mM. In vitro stored lenses in Optisol-GS lost glutathione quickly, ending with a concentration of 0.60±0.34 mM after 3 days while castor oil stored lenses exhibited a slower decline and ended at 3 times the concentration. A group of lenses were additionally stored under post mortem conditions within the host for 6 hours before its removal. Total glutathione after 6 hours was similar to that of lenses removed immediately after death, but with altered GSH and GSSG concentrations. Subsequent storage of these lenses in media showed changes similar to those in the first series of experiments, albeit to a lesser degree. CONCLUSIONS/SIGNIFICANCE: It was determined that storage in Optisol-GS resulted in a higher loss of glutathione than lenses stored in castor oil. Storage for more than 12 hours reduced glutathione to half its original concentration, and was considered unusable after 24 hours.

  13. Castor oil polyurethane as a coating option for spent nuclear fuel disposal containment

    Energy Technology Data Exchange (ETDEWEB)

    Mortley, A.; Bonin, H.W.; Bui, V.T. [Dept. of Chemistry and Chemical Engineering, Royal Military College of Canada, Kingston, Ontario (Canada)

    2009-07-01

    Castor oil polyurethane (COPU) coatings are being proposed as an additional barrier in the design of the copper containers to store spent nuclear fuel in Canada. The present work investigates the variation in the physicomechanical properties of two COPUs, based on an aliphatic and aromatic diisocyanate, as a function of ionizing radiation dose and dose rate. The changes in physicomechanical properties have shown that radiation, regardless of dose rate and isocyanate structure, increases the values of the modulus and the ultimate tensile strength when compared with those of the unirradiated samples, with aromatic based polyurethanes being more susceptible to variation than aliphatic based ones. (author)

  14. Meat quality assessment from young goats fed for long periods with castor de-oiled cake.

    Science.gov (United States)

    Oliveira, C H A; Silva, A M; Silva, L M; van Tilburg, M F; Fernandes, C C L; Moura, A A; Moreno, F B M B; Monteiro-Moreira, A C O; Moreira, R A; Bezerra, F J; Rondina, D

    2015-08-01

    Diet can influence both the qualitative and quantitative traits of ruminant meat. This study evaluated the effects of castor de-oiled cake on the meat of mixed-breed male goat kids. After 165days of diet treatment, no alterations (p>0.05) were observed in the in vivo performance, anatomic components, dissection and proximate composition of the Longissimus dorsi muscle, as well as in the color and pH of the carcasses. However, diet had an effect (pgoats led to alterations in meat quality, without compromising its consumption qualities. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Aluminum and steel adhesion with polyurethanes from castor oil adhesives submitted to gamma irradiation

    International Nuclear Information System (INIS)

    Azevedo, Elaine C.; Assumpcao, Roberto L.; Nascimento, Eduardo M. do; Claro Neto, Salvador; Soboll, Daniel S.

    2009-01-01

    Polyurethanes adhesive from castor oil is used to join aluminum and steel pieces. The effect of gamma radiation on the resistance to tension tests is investigated. The aluminum and steel pieces after being glued with the adhesive were submitted to gamma irradiation in doses of 1 kGy, 25 kGy and 100 kGy. The rupture strength of the joints after irradiation have a slightly increase or remains practically unchanged indicating that the adhesive properties is not affected by the gamma radiation. (author)

  16. Evaluation of the properties of iron oxide-filled castor oil polyurethane

    OpenAIRE

    Mussatti, Eleonora; Merlini, Claudia; Barra, Guilherme Mariz de Oliveira; Güths, Saulo; Oliveira, Antonio Pedro Novaes de; Siligardi, Cristina

    2012-01-01

    The aim of this study was to obtain and evaluate the electrical, thermal and mechanical properties of iron oxide-filled castor oil polyurethane (PU/Fe2O3). The iron oxide used in this study was a residue derived from the steel pickling process of a Brazilian steel rolling industry. Polymeric composites with different iron oxide volume fractions (2.5, 5.0, 7.5, 10.0 and 12.5%) were prepared through the casting process followed by compression molding at room temperature. The composites were ana...

  17. Production and Characterization of Biodiesel Using Nonedible Castor Oil by Immobilized Lipase from Bacillus aerius

    Science.gov (United States)

    Narwal, Sunil Kumar; Saun, Nitin Kumar; Dogra, Priyanka; Chauhan, Ghanshyam

    2015-01-01

    A novel thermotolerant lipase from Bacillus aerius was immobilized on inexpensive silica gel matrix. The immobilized lipase was used for the synthesis of biodiesel using castor oil as a substrate in a solvent free system at 55°C under shaking in a chemical reactor. Several crucial parameters affecting biodiesel yield such as incubation time, temperature, substrate molar ratio, and amount of lipase were optimized. Under the optimized conditions, the highest biodiesel yield was up to 78.13%. The characterization of synthesized biodiesel was done through FTIR spectroscopy, 1H NMR spectra, and gas chromatography. PMID:25874205

  18. Castor oil polyurethane as a coating option for spent nuclear fuel disposal containment

    International Nuclear Information System (INIS)

    Mortley, A.; Bonin, H.W.; Bui, V.T.

    2009-01-01

    Castor oil polyurethane (COPU) coatings are being proposed as an additional barrier in the design of the copper containers to store spent nuclear fuel in Canada. The present work investigates the variation in the physicomechanical properties of two COPUs, based on an aliphatic and aromatic diisocyanate, as a function of ionizing radiation dose and dose rate. The changes in physicomechanical properties have shown that radiation, regardless of dose rate and isocyanate structure, increases the values of the modulus and the ultimate tensile strength when compared with those of the unirradiated samples, with aromatic based polyurethanes being more susceptible to variation than aliphatic based ones. (author)

  19. Synthesis of colloids based on gold nanoparticles dispersed in castor oil

    International Nuclear Information System (INIS)

    Silva, E. C. da; Silva, M. G. A. da; Meneghetti, S. M. P.; Machado, G.; Alencar, M. A. R. C.; Hickmann, J. M.; Meneghetti, M. R.

    2008-01-01

    New colloidal solutions of gold nanoparticles (AuNP), using castor oil as a nontoxic organic dispersant agent, were prepared via three different methods. In all three cases, tetrachloroauric(III) acid was employed as the gold source. The colloids were characterized by UV-Vis spectroscopy and transmission electron microscopy (TEM). The AuNP produced by the three methods were quasispherical in shape, however with different average sizes. The individual characteristics of the nanoparticles presented in each colloidal system were also confirmed by observation of absorption maxima at different wavelengths of visible light. Each method of synthesis leads to colloids with different grades of stability with respect to particle agglomeration.

  20. Kinetic and Thermodynamics studies for Castor Oil Extraction Using Subcritical Water Technology.

    Science.gov (United States)

    Abdelmoez, Wael; Ashour, Eman; Naguib, Shahenaz M; Hilal, Amr; Al Mahdy, Dalia A; Mahrous, Engy A; Abdel-Sattar, Essam

    2016-06-01

    In this work both kinetic and thermodynamics of castor oil extraction from its seeds using subcritical water technique were studied. It was found that the extraction process followed two consecutive steps. In these steps, the oil was firstly extracted from inside the powder by diffusion mechanism. Then the extracted oil, due to extending the extraction time under high temperature and pressure, was subjected to a decomposition reaction following first order mechanism. The experimental data correlated well with the irreversible consecutive unimolecular-type first order mechanism. The values of both oil extraction rate constants and decomposition rate constants were calculated through non-linear fitting using DataFit software. The extraction rate constants were found to be 0.0019, 0.024, 0.098, 0.1 and 0.117 min(-1), while the decomposition rate constants were 0.057, 0.059, 0.014, 0.019 and 0.17 min(-1) at extraction temperatures of 240, 250, 260, 270 and 280°C, respectively. The thermodynamic properties of the oil extraction process were investigated using Arrhenius equation. The values of the activation energy, Ea, and the frequency factor, A, were 73 kJ mol(-1) and 946, 002 min(-1), respectively. The physicochemical properties of the extracted castor oil including the specific gravity, viscosity, acid value, pH value and calorific value were found to be 0.947, 7.487, 1.094 mg KOH/g, 6.1, and 41.5 MJ/Kg, respectively. Gas chromatography analysis showed that ricinoleic acid (83.6%) appears as the predominant fatty acid in the extracted oil followed by oleic acid (5.5%) and linoleic acid (2.3%).

  1. Phosphorylation of glyoxysomal malate synthase from castor oil seed endosperm and cucumber cotyledon

    International Nuclear Information System (INIS)

    Yang, Y.P; Randall, D.D.

    1989-01-01

    Glyoxysomal malate synthase (MS) was purified to apparent homogeneity from 3-d germinating castor oil seed endosperm by a relatively simple procedure including two sucrose density gradient centrifugations. Antibodies raised to the caster oil seed MS crossreacted with MS from cucumber cotyledon. MS was phosphorylated in both tissues in an MgATP dependent reaction. The phosphorylation pattern was similar for both enzymes and both enzymes were inhibited by NaF, NaMo, (NH 4 )SO 4 , glyoxylate and high concentration of MgCl 2 (60 mM), but was not inhibited by NaCl and malate. Further characterization of the phosphorylation of MS from castor oil seed endosperms showed that the 5S form of MS is the form which is labelled by 32 P. The addition of exogenous alkaline phosphatase to MS not only decreased enzyme activity, but could also dephosphorylate phospho-MS. The relationship between dephosphorylation of MS and the decrease of MS activity is currently under investigation

  2. Green superlubricity of Nitinol 60 alloy against steel in presence of castor oil

    Science.gov (United States)

    Zeng, Qunfeng; Dong, Guangneng; Martin, Jean Michel

    2016-07-01

    In the present work, first, we show that sliding Nitinol 60 alloy against steel under castor oil lubrication exhibits a new case of superlubricity (coefficient of friction CoF ≪ 0.01). So far, CoF below 0.01 have never been achieved under boundary lubrication at high contact pressure and in presence of vegetable oil as a green lubricant. Next, it is demonstrated that superlubricity is controlled by tribochemical reactions, involving chemical degradation of castor oil and the formation of metal oxy-hydroxides. Finally, to explain these findings, we propose a novel superlubricity mechanism consisting of hexanoic acid molecules intercalated between nickel and iron oxy-hydroxide lamellar layers, a structure very similar to the one found in Fe-Ni batteries. We propose that superlubricity is achieved due to repulsive electrostatic forces acting between the intercalated metal oxy-hydroxide lamellar compounds. This system would be suitable for practical engineering applications in many fields including biotechnologies.

  3. Influence of the reaction conditions on the enzyme catalyzed transesterification of castor oil

    DEFF Research Database (Denmark)

    Andrade, Thalles Allan; Errico, Massimiliano; Christensen, Knud Villy

    2017-01-01

    The identification of the influence of the reaction parameters is of paramount importance when defining a process design. In this work, non-edible castor oil was reacted with methanol to produce a possible component for biodiesel blends, using liquid enzymes as the catalyst. Temperature, alcohol......-to-oil molar ratio, enzyme and added water contents were the reaction parameters evaluated in the transesterification reactions. The optimal conditions, giving the optimal final FAME yield and FFA content in the methyl ester-phase was identified. At 35 °C, 6.0 methanol-to-oil molar ratio, 5 wt% of enzyme and 5...... wt% of water contents, 94 % of FAME yield and 6.1 % of FFA in the final composition were obtained. The investigation was completed with the analysis of the component profiles, showing that at least 8 hours are necessary to reach a satisfactory FAME yield together with a minor FFA content....

  4. Potential of castor bean (Ricinus communis L.) for phytoremediation of mine tailings and oil production.

    Science.gov (United States)

    Ruiz Olivares, Alejandro; Carrillo-González, Rogelio; González-Chávez, Ma del Carmen A; Soto Hernández, Ramón Marcos

    2013-01-15

    Bioenergy production combined with phytoremediation has been suggested to help in solving two critical world problems: the gradual reduction of fossil fuels and soil contamination. The aim of this research was to investigate the potential for the use of Ricinus communis L. (castor oil plant) as an energy crop and plant species to remediate metal-polluted sites. This study was performed in mine tailings containing high concentrations of Cu, Zn, Mn, Pb and Cd. Physico-chemical characterization, total, DTPA-extractable and water-soluble metals in rhizospheric tailings heap samples were carried. Metal concentrations in plant tissues and translocation factors (TFs) were also determined. The Ricinus seed-oil content was high between 41 and 64%, seeds from San Francisco site 6 had the highest oil content, while these from site 7 had the lowest. No trend between oil yield vs seed origin site was observed. Seed-oil content was negatively correlated with root concentration of Cu, Zn, Pb and Cd, but no correlation was observed with the extractable-metals. According to its shoot metal concentrations and TFs, castor bean is not a metal accumulator plant. This primary colonizing plant is well suited to cope with the local toxic conditions and can be useful for the stabilization of these residues, and for then decreasing metal bioavailability, dispersion and human health risks on these barren tailings heaps and in the surrounding area. Our work is the first report regarding combined oil production and a phytostabilization role for Ricinus plants in metal mine tailings and may give a new value to suitable metal-polluted areas. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. 17 alpha-hydroxyprogesterone caproate vehicle, castor oil, enhances the contractile effect of oxytocin in human myometrium in pregnancy.

    Science.gov (United States)

    O'Sullivan, Michael D; Hehir, Mark P; O'Brien, Yvonne M; Morrison, John J

    2010-05-01

    The possibility exists that the vehicle for 17-alpha-hydroxyprogesterone caproate, castor oil, exerts an effect on human uterine contractility. The aim of this study was to evaluate its effects on contractility of myometrial preparations that were obtained during pregnancy. Myometrial strips were suspended under isometric conditions. Contractility was induced with oxytocin. Strips were incubated in castor oil or physiologic salt solution and suspended for a further oxytocin challenge. Contractile integrals were compared between both groups. Strips that were exposed to castor oil demonstrated increased contractile activity that was elicited by oxytocin (mean contractility value, 165.53%+/-17.03%; n=8; P=.004), compared with control strips (mean contractility value, 72.57%+/-7.48%; n=8; P=.003). There was a significant increase in contractile activity of the castor oil-exposed strips, compared with those that were exposed to physiologic salt solution (n=8; Pcastor oil results in enhanced oxytocin-induced contractility. Copyright (c) 2010 Mosby, Inc. All rights reserved.

  6. Toxicity of water-soluble fractions of biodiesel fuels derived from castor oil, palm oil, and waste cooking oil.

    Science.gov (United States)

    Leite, Maria Bernadete Neiva Lemos; de Araújo, Milena Maria Sampaio; Nascimento, Iracema Andrade; da Cruz, Andrea Cristina Santos; Pereira, Solange Andrade; do Nascimento, Núbia Costa

    2011-04-01

    Concerns over the sustained availability of fossil fuels and their impact on global warming and pollution have led to the search for fuels from renewable sources to address worldwide rising energy demands. Biodiesel is emerging as one of the possible solutions for the transport sector. It shows comparable engine performance to that of conventional diesel fuel, while reducing greenhouse gas emissions. However, the toxicity of products and effluents from the biodiesel industry has not yet been sufficiently investigated. Brazil has a very high potential as a biodiesel producer, in view of its climatic conditions and vast areas for cropland, with consequent environmental risks because of possible accidental biodiesel spillages into water bodies and runoff to coastal areas. This research determined the toxicity to two marine organisms of the water-soluble fractions (WSF) of three different biodiesel fuels obtained by methanol transesterification of castor oil (CO), palm oil (PO), and waste cooking oil (WCO). Microalgae and sea urchins were used as the test organisms, respectively, for culture-growth-inhibition and early-life-stage-toxicity tests. The toxicity levels of the analyzed biodiesel WSF showed the highest toxicity for the CO, followed by WCO and the PO. Methanol was the most prominent contaminant; concentrations increased over time in WSF samples stored up to 120 d. Copyright © 2010 SETAC.

  7. Integral process of obtaining glycerol as a by-product of biodiesel production from castor oil

    Directory of Open Access Journals (Sweden)

    Leonel Romero

    2012-12-01

    Full Text Available The biodiesel is obtained from about 10 years ago in Europe, and now that it has taken hold as fuel for diesel engines, it is expected a clear increase in the production of this class of fuels in a the near future. The biodiesel is derived from the transesterification reaction of castor oil with methanol, which is the main by-product the glycerol with an approximate content of 10%. Besides catalyst residuals, soaps, methanol traces, mono and diglycerides in small percentages are presented. This study proposes the separation, purification and characterization of the glycerol obtained from the transesterificación reaction of the castor oil, in order to be able to market it in the national or international market, so that it fulfills the standards of quality, which means getting a pure glycerol and the appropriate physico-chemical characteristics and techniques. The glycerin-methyl esters separation is carried out by decantation being obtained a percentage of around 70% glycerol. This percentage is subsequently increased through the purification process, using hydrochloric acid. Glycerol characterization was carried out by physicochemical and organoleptic tests. The purification process allowed us to obtain a glycerol with a percentage of purity close to 98%. It was also tested by comparison with theoretical data that remnants influenced in the physiochemical properties

  8. Production of Particleboards from Hevea brasiliensis Clones and Castor Oil-based Polyurethane Resin

    Directory of Open Access Journals (Sweden)

    Maristela Gava

    2015-08-01

    Full Text Available The economic exploitation of rubber tree (Hevea brasiliensis usage is primarily directed toward latex extraction. After the productive life of the rubber tree forest, the managed area is harvested for planting reformulation. The harvested wood is most often used for energy generation purposes. The aim of this work was to study the feasibility of using rubberwood waste and castor oil-based polyurethane resin in the production of particleboards. Homogeneous and heterogeneous panels were made with nominal dimensions of 500 x 500 mm and thicknesses of 10 mm using particles from GT1 and RRIM600 clones of the rubber tree and 12% castor oil-based polyurethane adhesive. The panels were pressed at 140 °C for 12 min with 40 kgf/cm2 specific pressure. Density, moisture content, thickness swelling, water absorption for 2 and 24 h, static bending, and internal bonding determinations were performed according to the Brazilian Standard (NBR 14810-3 (2006 for the physical-mechanical panel characterization. The results show that using Hevea brasiliensis in particleboard production is viable. However, multilayer boards exhibited better results.

  9. Bioplastic from Chitosan and Yellow Pumpkin Starch with Castor Oil as Plasticizer

    Science.gov (United States)

    Hasan, M.; Rahmayani, R. F. I.; Munandar

    2018-03-01

    This study has been conducted on bioplastic synthesis of chitosan and yellow pumpkin starch (Cucurbita moschata) with castor oil as plasticizer. The purpose of this study is to determine the characteristics of the effect of chitosan and starch composition of pumpkins against solvent absorption, tensile strength and biodegradable. The first stage of the research is the making of bioplastic by blending yellow pumpkin starch, chitosan and castor oil. Further, it tested the absorption capacity of the solvent, tensile strength test, and biodegradable analysis. The optimum absorption capacity of the solvent is obtained on the composition of Pumpkin/Chitosan was 50/50 in H2O and C2H5OH solvent. Meanwhile the optimum absorbency in HCl and NaOH solvents is obtained by 60/40 composition. The characterization of the optimum tensile strength test was obtained on the 40/60 composition of 6.787 ± 0.274 Mpa and the fastest biodegradation test process within 5-10 days occurred in the 50/50 composition. The more chitosan content the higher the value of tensile strength test obtained, while the fastest biodegradation rate occureds in the composition of yellow pumpkin starch and chitosan balanced 50:50.

  10. The use of castor oil and ricinoleic acid in lead chalcogenide nanocrystal synthesis

    Science.gov (United States)

    Kyobe, Joseph W. M.; Mubofu, Egid B.; Makame, Yahya M. M.; Mlowe, Sixberth; Revaprasadu, Neerish

    2016-08-01

    A green solution-based thermolysis method for the synthesis of lead chalcogenide (PbE, E = S, Se, Te) nanocrystals in castor oil (CSTO) and its isolate ricinoleic acid (RA) is described. The blue shift observed from the optical spectra of CSTO and RA-capped PbE nanocrystals (NCs) confirmed the evidence of quantum confinement. The dimensions of PbE NCs obtained from NIR absorption spectra, transmission electron microscopy (TEM), and X-ray diffraction (XRD) studies were in good agreement. The particle sizes estimated were in the range of 20, 25, and 130 nm for castor oil-capped PbS, PbSe, and PbTe, respectively. Well-defined close to cubic-shaped particles were observed in the scanning electron microscopy (SEM) images of PbSe and PbTe nanocrystals. The high-resolution TEM and selective area electron diffraction (SAED) micrographs of the as-synthesized crystalline PbE NCs showed distinct lattice fringes with d-spacing distances corroborating with the standard values reported in literature.

  11. Isocyanate-functionalized chitin and chitosan as gelling agents of castor oil.

    Science.gov (United States)

    Gallego, Rocío; Arteaga, Jesús F; Valencia, Concepción; Franco, José M

    2013-06-03

    The main objective of this work was the incorporation of reactive isocyanate groups into chitin and chitosan in order to effectively use the products as reactive thickening agents in castor oil. The resulting gel-like dispersions could be potentially used as biodegradable lubricating greases. Three different NCO-functionalized polymers were obtained: two of them by promoting the reaction of chitosan with 1,6-hexamethylene diisocyanate (HMDI), and the other by using chitin instead of chitosan. These polymers were characterized through 1H-NMR, FTIR and thermogravimetric analysis (TGA). Thermal and rheological behaviours of the oleogels prepared by dispersing these polymers in castor oil were studied by means of TGA and small-amplitude oscillatory shear (SAOS) measurements. The evolution and values of the linear viscoelasticity functions with frequency for -NCO-functionalized chitosan- and chitin-based oleogels are quite similar to those found for standard lubricating greases. In relation to long-term stability of these oleogels, no phase separation was observed and the values of viscoelastic functions increase significantly during the first seven days of ageing, and then remain almost constant. TGA analysis showed that the degradation temperature of the resulting oleogels is higher than that found for traditional lubricating greases.

  12. Castor oil as secondary carbon source for production of sophorolipids using Starmerella bombicola NRRL Y-17069.

    Science.gov (United States)

    Bajaj, Vinit Kamalkishor; Annapure, Uday S

    2015-01-01

    Sophorolipids (SLs), a prominent member of the biosurfactants family are produced in acidic and/or lactonic form by yeast Starmerella bombicola NRRL Y-17069 when grown on hydrophilic or hydrophobic or both carbon sources. In current study, ricinoleic acid rich castor oil (10%) was used as hydrophobic and glycerol (10%) was used as hydrophilic carbon source. The yields of 24.5 ± 0.25 g/l sophorolipids were analyzed by anthrone and HPLC method which further increased upto 40.24 ± 0.76 g/l sophorolipids using fed batch process at 5L fermenter level. The structures of sophorolipids synthesized on castor oil were elucidated by liquid chromatography-mass spectrometer (LC-MS), (13)C and (1)H NMR. The results indicated that the ricinoleic acid (RA) gets hydroxylated at ω-1 position but incorporated into sophorolipids through already available hydroxyl group at 12(th) position. It resulted in the production of a novel sophorolipids with hydroxyl fatty acid as side chain and has applications as surfactant for novel drug delivery, anti microbial agent, cosmetic ingredient and emulsifier.

  13. Diametral tensile strength and film thickness of an experimental dental luting agent derived from castor oil

    Directory of Open Access Journals (Sweden)

    Juliana Cabrini Carmello

    2012-02-01

    Full Text Available The need to develop new dental luting agents in order to improve the success of treatments has greatly motivated research. OBJECTIVE: The aim of this study was to evaluate the diametral tensile strength (DTS and film thickness (FT of an experimental dental luting agent derived from castor oil (COP with or without addition of different quantities of filler (calcium carbonate - CaCO3. MATERIAL AND METHODS: Eighty specimens were manufactured (DTS N=40; FT N=40 and divided into 4 groups: Pure COP; COP 10%; COP 50% and zinc phosphate (control. The cements were mixed according to the manufacturers' recommendations and submitted to the tests. The DTS test was performed in the MTS 810 testing machine (10 KN, 0.5 mm/min. For FT test, the cements were sandwiched between two glass plates (2 cm² and a load of 15 kg was applied vertically on the top of the specimen for 10 min. The data were analyzed by means of one-way ANOVA and Tukey's test (α=0.05. RESULTS: The values of DTS (MPa were: Pure COP- 10.94±1.30; COP 10%- 30.06±0.64; COP 50%- 29.87±0.27; zinc phosphate- 4.88±0.96. The values of FT (µm were: Pure COP- 31.09±3.16; COP 10%- 17.05±4.83; COP 50%- 13.03±4.83; Zinc Phosphate- 20.00±0.12. One-way ANOVA showed statistically significant differences among the groups (DTS - p=1.01E-40; FT - p=2.4E-10. CONCLUSION: The experimental dental luting agent with 50% of filler showed the best diametral tensile strength and film thickness.

  14. Preparation and evaluation of tilmicosin-loaded hydrogenated castor oil nanoparticle suspensions of different particle sizes.

    Science.gov (United States)

    Chen, Xiaojin; Wang, Ting; Lu, Mengmeng; Zhu, Luyan; Wang, Yan; Zhou, WenZhong

    2014-01-01

    Three tilmicosin-loaded hydrogenated castor oil nanoparticle (TMS-HCO-NP) suspensions of different particle sizes were prepared with different polyvinyl alcohol surfactant concentrations using a hot homogenization and ultrasonic technique. The in vitro release, in vitro antibacterial activity, mammalian cytotoxicity, acute toxicity in mice, and stability study were conducted to evaluate the characteristics of the suspensions. The in vitro tilmicosin release rate, antibacterial activity, mammalian cytotoxicity, acute toxicity in mice, and stability of the suspensions were evaluated. When prepared with polyvinyl alcohol concentrations of 0.2%, 1%, and 5%, the mean diameters of the nanoparticles in the three suspensions were 920±35 nm, 452±10 nm, and 151±4 nm, respectively. The three suspensions displayed biphasic release profiles similar to that of freeze-dried TMS-HCO-NP powders, with the exception of having a faster initial release. Moreover, suspensions of smaller-sized particles showed faster initial release, and lower minimum inhibitory concentrations and minimum bactericidal concentrations. Time-kill curves showed that within 12 hours, the suspension with the 151 nm particles had the most potent bactericidal activity, but later, the suspensions with larger-sized particles showed increased antibacterial activity. None of the three suspensions were cytotoxic at clinical dosage levels. At higher drug concentrations, all three suspensions showed similar concentration-dependent cytotoxicity. The suspension with the smallest-sized particle showed significantly more acute toxicity in mice, perhaps due to faster drug release. All three suspensions exhibited good stability at 4°C and at room temperature for at least 6 months. These results demonstrate that TMS-HCO-NP suspensions can be a promising formulation for tilmicosin, and that nanoparticle size can be an important consideration for formulation development.

  15. A castor oil-containing dental luting agent: effects of cyclic loading and storage time on flexural strength

    Directory of Open Access Journals (Sweden)

    Juliana dos Reis DERCELI

    2014-12-01

    Full Text Available Favorable results in the use of castor oil polyurethane (COP as pulp capping, membrane material, sealer, mouthwash and in bone repair, associated with the fact that Ricinus communis is not derived from petroleum and it is abundant in Brazil, encourage researches in the development of luting agents. Objectives This study compared the flexural strength (FS of a castor oil-containing dental luting agent with a weight percentage of 10% (wt% of calcium carbonate (COP10 with RelyX ARC (RX after mechanical cycling (MC and distilled water storage. Material and Methods Sixty-four specimens (25x2x2 mm were fabricated and divided into two groups, COP10 and RX (control. Each group was divided into 4 subgroups (n=8 according to the storage time, 24 hours (24 h or 60 days (60 d, and the performance (MC+FS or not (only FS of the mechanical cycling test. The FS (10 kN; 0.5 mm/min and MC tests (10,000 cycles, 5 Hz, 0.5 mm/min were carried out using an MTS-810 machine. The data were analyzed using ANOVA (α=0.05. Results The obtained FS (MPa values were: COP10 24h- 19.04±2.41; COP10 60d- 17.92±3.54; RX 24h- 75.19±3.43; RX 60d- 88.77±6.89. All the RX specimens submitted to MC fractured, while the values for COP10 after MC were as follows: COP10 24h- 17.90±1.87 and COP10 60d- 18.60±1.60. Conclusions A castor oil-containing dental luting agent with a weight percentage of 10% (wt% of calcium carbonate is resistant to mechanical cycling without decreases in flexural strength. However, mean COP10 showed only about 25% of the RelyX ARC mean flexural strength.

  16. A castor oil-containing dental luting agent: effects of cyclic loading and storage time on flexural strength.

    Science.gov (United States)

    Derceli, Juliana Dos Reis; Fais, Laiza Maria Grassi; Pinelli, Lígia Antunes Pereira

    2014-01-01

    Favorable results in the use of castor oil polyurethane (COP) as pulp capping, membrane material, sealer, mouthwash and in bone repair, associated with the fact that Ricinus communis is not derived from petroleum and it is abundant in Brazil, encourage researches in the development of luting agents. Objectives This study compared the flexural strength (FS) of a castor oil-containing dental luting agent with a weight percentage of 10% (wt%) of calcium carbonate (COP10) with RelyX ARC (RX) after mechanical cycling (MC) and distilled water storage. Material and Methods Sixty-four specimens (25x2x2 mm) were fabricated and divided into two groups, COP10 and RX (control). Each group was divided into 4 subgroups (n=8) according to the storage time, 24 hours (24 h) or 60 days (60 d), and the performance (MC+FS) or not (only FS) of the mechanical cycling test. The FS (10 kN; 0.5 mm/min) and MC tests (10,000 cycles, 5 Hz, 0.5 mm/min) were carried out using an MTS-810 machine. The data were analyzed using ANOVA (α=0.05). Results The obtained FS (MPa) values were: COP10 24h- 19.04±2.41; COP10 60d- 17.92±3.54; RX 24h- 75.19±3.43; RX 60d- 88.77±6.89. All the RX specimens submitted to MC fractured, while the values for COP10 after MC were as follows: COP10 24h- 17.90±1.87 and COP10 60d- 18.60±1.60. Conclusions A castor oil-containing dental luting agent with a weight percentage of 10% (wt%) of calcium carbonate is resistant to mechanical cycling without decreases in flexural strength. However, mean COP10 showed only about 25% of the RelyX ARC mean flexural strength.

  17. Biodiesel Production from Castor Oil by Using Calcium Oxide Derived from Mud Clam Shell

    Directory of Open Access Journals (Sweden)

    S. Ismail

    2016-01-01

    Full Text Available The catalytic potential of calcium oxide synthesized from mud clam shell as a heterogeneous catalyst for biodiesel production was studied. The mud clam shell calcium oxide was characterized using particle size analyzer, Fourier transform infrared spectroscopy, scanning electron microscopy, and BET gas sorption analyzer. The catalyst performance of mud clam shell calcium oxide was studied in the transesterification of castor oil as biodiesel. Catalyst characterization and transesterification study results of synthesized catalyst proved the efficiency of the natural derived catalyst for biodiesel production. A highest biodiesel yield of 96.7% was obtained at optimal parameters such as 1 : 14 oil-to-methanol molar ratio, 3% w/w catalyst concentration, 60°C reaction temperature, and 2-hour reaction time. Catalyst reusability test shows that the synthesized calcium oxide from mud clam shell is reusable up to 5 times.

  18. Optimization of castor seed oil extraction process using response surface methodology

    Directory of Open Access Journals (Sweden)

    J. D. Mosquera-Artamonov

    2016-09-01

    Full Text Available This work focuses on the study of the oil extraction yield from castor seed using three different seed conditions: whole, minced and bare endosperm. Taguchi design was used to determine the contribution of the following parameters: seed condition, seed load in the extractor, temperature, and pressure. It was proved that it is necessary to introduce the whole seed and that the presence of the pericarp increases the extraction yield. The contribution of the control factors has an extraction yield limit. After determining which factors contributed to the process, these were left at their optimum levels aiming to reduce the control factors to only two. The complete analysis was done using a surface response methodology giving the best parameter for temperature and pressure that allows a better yielding mechanical extraction. The oil extraction yield can be kept up to 35% of the seed.

  19. Changes in antioxidant and biochemical activities in castor oil-coated Capsicum annuum L. during postharvest storage.

    Science.gov (United States)

    Panigrahi, Jitendriya; Patel, Mansi; Patel, Niyati; Gheewala, Bhumi; Gantait, Saikat

    2018-06-01

    This study, for the first time, evaluates the efficiency of castor oil when used as an external coating on Capsicum annuum L., to increase postharvest storage-life at 4 ± 1 °C. The castor oil-coated fruits were successfully stored for 36 days, while the non-coated fruits could only sustain for 18 days. Throughout the storage period (at 9-day intervals), different antioxidants and biochemical assays (allied with storage) such as titratable acidity, ascorbic acid content, ferrous ion chelating activity, reducing power, DPPH scavenging activity, hydroxyl radical scavenging activity, total phenolic content, total sugar estimation, and enzymatic study of polyphenol oxidase and pectate lyase, were assessed. During storage, the castor oil-coated fruits showed a substantial decrease in titratable acidity, ascorbic acid content, total phenolic content, including antioxidant activities such as reducing power and DPPH activity; however, an increase in ferrous ion chelating activity, total soluble sugar content, polyphenol oxidase activity and initial pectate lyase activity was observed, in contrast to that of the non-coated fruits. The application of castor oil proved to be effective in delaying the ripening process of fruits during storage.

  20. 78 FR 20029 - Castor Oil, Polymer With Adipic Acid, Linoleic Acid, Oleic Acid and Ricinoleic Acid; Tolerance...

    Science.gov (United States)

    2013-04-03

    ..., Polymer With Adipic Acid, Linoleic Acid, Oleic Acid and Ricinoleic Acid; Tolerance Exemption AGENCY... from the requirement of a tolerance for residues of castor oil, polymer with adipic acid, linoleic acid... pesticide formulation. Advance Polymer Technology submitted a petition to EPA under the Federal Food, Drug...

  1. The effects of possible contamination on the radiocarbon dating of the Dead Sea Scrolls I : Castor oil

    NARCIS (Netherlands)

    Rasmussen, KL; van der Plicht, J; Cryer, FH; Doudna, G; Cross, FM; Strugnell, J; Rasmussen, Kaare L.; Cryer, Frederick H.; Cross, Frank M.

    2001-01-01

    Some fragments of the Dead Sea Scroll manuscripts were contaminated with castor oil in the late 1950s. We have conducted experiments in order to establish if the AAA pretreatment cleaning procedures conducted on Dead Sea Scroll manuscript samples in the last two dating series (Bonani et al. 1992;

  2. Evaluation of the Optimal Reaction Conditions for the Methanolysis and Ethanolysis of Castor Oil Catalyzed by Immobilized Enzymes

    DEFF Research Database (Denmark)

    Andrade, Thalles Allan; Al-Kabalawi, Ibrahim; Errico, Massimiliano

    This study aims to compare the efficiency of the transesterification of castor oil with methanol and ethanol as part of the biodiesel production, using immobilized enzyme Lipozyme IM as catalyst. Different reaction conditions were evaluated and optimized, including the reaction temperature, alcohol...

  3. Rhipicephalus sanguineus (Acari: Ixodidae) female ticks exposed to castor oil (Ricinus communis): an ultrastructural overview.

    Science.gov (United States)

    Sampieri, B R; Furquim, K C S; Nunes, P H; Camargo-Mathias, M I

    2013-02-01

    Tick control has been accomplished through the use of synthetic acaricides, which has created resistant individuals, as well as contaminating the environment and nontarget organisms. Substances of plant origin, such as oils and extracts of eucalyptus and neem leaves, have been researched as an alternative to replace the synthetic acaricides. Ricinoleic acid esters from castor oil have recently been shown as a promising alternative in eliminating bacterial contamination during ethanol fermentation, by acting as an effective biocide. The same positive results have been observed when these esters are added to the food given to tick-infested rabbits. This study tested the effect of these substance on the reproductive system of Rhipicephalus sanguineus females, added to rabbit food, more specifically on oogenesis. For this, four groups were established: four control groups (CG1, CG2, CG3, and CG4) and four treatment groups (TG1, TG2, TG3, and TG4) with one rabbit in each (New Zealand White), used as hosts. After full 4 days feeding (semi-engorgement), the females were collected and had their ovaries extracted. In this study, it was observed that R. sanguineus females exposed to esters had their ovaries modified, which was demonstrated through transmission electron microscopy techniques. The addition of ricinoleic esters to the diet of tick-infested rabbits revealed how toxic such substances are for the cytoplasmic organelles of oocytes and pedicel cells. These compounds can change the morphophysiology of germ and somatic cells, consequently influencing their viability and, therefore, confirming that the ricinoleic acid esters from castor oil are a promising substance in the control of R. sanguineus.

  4. Ricinus communis L. (castor bean) as a potential candidate for revegetating industrial waste contaminated sites in peri-urban Greater Hyderabad: remarks on seed oil.

    Science.gov (United States)

    Boda, Ravi Kiran; Majeti, Narasimha Vara Prasad; Suthari, Sateesh

    2017-08-01

    Ricinus communis L. (castor bean or castor oil plant) was found growing on metal-contaminated sites (4) of peri-urban Greater Hyderabad comprises of erstwhile industrial areas viz Bollaram, Patancheru, Bharatnagar, and Kattedan industrial areas. During 2013-2017, about 60 research papers have appeared focusing the role of castor bean in phytoremediation of co-contaminated soils, co-generation of biomaterials, and environmental cleanup, as bioenergy crop and sustainable development. The present study is focused on its use as a multipurpose phytoremediation crop for phytostabilization and revegetation of waste disposed peri-urban contaminated soils. To determine the plant tolerance level, metal accumulation, chlorophyll, protein, proline, lipid peroxidation, oil content, and soil properties were characterized. It was noticed that the castor plant and soils have high concentration of metals such as cadmium (Cd), lead (Pb), iron (Fe), manganese (Mn), and zinc (Zn). The soils have high phosphorous (P), adequate nitrogen (N), and low concentration of potassium (K). Iron (Fe) concentrations ranged from1672±50.91 to 2166±155.78 mg kg -1 in the soil. The trend of metal accumulation Fe>Zn>Mn>Pb>Cd was found in different plant parts at polluted sites. The translocation of Cd and Pb showed values more than one in industrial areas viz Bollaram, Kattedan, and Bharatnagar indicating the plants resistance to metal toxicity. Chlorophyll and protein content reduced while proline and malondialdehyde increased due to its tolerance level under metal exposure. The content of ricinoleic acid was higher, and the fatty acids composition of polluted areas was almost similar to that of the control area. Thus, R. communis L. can be employed for reclamation of heavy metal contaminated soils.

  5. Castor oil and commercial thermoplastic polyurethane membranes modified with polyaniline: a comparative study

    Energy Technology Data Exchange (ETDEWEB)

    Almeida Junior, Jose Humberto Santos; Meneguzzi, Alvaro; Ferreira, Carlos Arthur, E-mail: jhsajunior@globomail.com [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegtre, RS (Brazil). Dept. de Engenharia de Materiais; Bertuol, Daniel Assumpcao [Universidade Federal de Santa Maria (UFSM), RS (Brazil). Dept. de Engenharia Quimica; Amado, Franco Dani Rico [Universidade Estadual de Santa Cruz (UESC), Ilheus, BA (Brazil). Dept. de Ciencias Exatas e Tecnologia

    2013-11-01

    The study of conducting polymeric membranes is decisive in some areas, as in fuel cells and electrodialysis. This work aims the study of membranes using conventional and conductive polymers blends. Two types of polyurethane were used as conventional polymers, commercial thermoplastic polyurethane and polyurethane synthesized from castor oil and 4-4-dicyclohexylmethane isocyanate. Two kinds of conducting polymers were used, polyaniline doped with organic acid and a self doped polyaniline. The polymers and the membranes were characterized by electrical conductivity, Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA) and scanning electron microscopy (SEM). The synthesis of the membranes produced was proper, featuring a complete reaction, analyzed by FTIR. The membranes also showed good mechanical properties and thermal stability ( Almost-Equal-To 220 Degree-Sign C). Among the membranes studied, the polyaniline doped with p-toluenesulphonic acid obtained higher thermal and viscoelastic properties. Thus they can be used in separation techniques using membranes. (author)

  6. High pressure changes of the castor oil viscosity by ultrasonic method

    International Nuclear Information System (INIS)

    Rostocki, A J; Siegoczynski, R M; Kielczynski, P; Szalewski, M

    2008-01-01

    The pressure change of viscosity of castor oil have been measured by ultrasonic method within the range of pressure up to 0.9 GPa. For the measurement, the authors have applied a new ultrasonic method based on Bleustein-Gulyaev (B-G) waves. For the lower pressures (up to 0.3 GPa) the results have been compared with earlier results obtained by falling body method, whereas for the higher pressure range results were compared with those obtained by the flow type viscometer. The measurements have shown: 1. Exponential rise of viscosity with pressure up to 0.4 GPa according to the Barus formula. 2. Extraordinary increment of viscosity at constant pressure during phase transition. 3. The decomposition of the high pressure phase during the decompression process have shown very large hysteresis of viscosity on pressure. 4. After the decompression process the viscosity lasts higher then a initial value for several hours

  7. Mechanical Behavior of Castor-Oil-Based Advanced Polyurethane Functionalized with Glycidol and Siloxanes

    Science.gov (United States)

    Mathew, Aiswarea; Kurmvanshi, Surendra; Mohanty, Smita; Nayak, Sanjay K.

    2017-12-01

    Castor-oil-based polyurethane (PU), epoxy (glycidol) terminated polyurethane (EPU), and hydroxy terminated poly (dimethyl siloxane) (HTPDMS) modified EPU (EPDMS) were synthesized. The PU and EPU were synthesized with polyol:diisocyanate and polyol:diisocyanate:glycidol ratio of 1:1.2 and 1:3:3, respectively, whereas EPDMS was prepared by the incorporation of 5 wt.%, 10 wt.%, 20 wt.%, and 30 wt.% of HTPDMS into the EPU. The structural modification of EPDMS was confirmed by solid-state CP/MAS 13C and 29Si NMR spectroscopy. The results of a tensile test revealed that the EPDMS with 10 wt.% loading of HTPDMS (EPDMS10) exhibited considerable enhancement in the tensile strength and modulus. The scanning electron microscope analysis was performed to understand the increased phase heterogeneity of the samples.

  8. Effect of γ-ray irradiation on properties of castor oil-polyurethane potting materials

    International Nuclear Information System (INIS)

    Guan Jian; Luo Xianglin; Yue Yilun

    2001-01-01

    After γ-ray sterilization, the amounts of 4,4'-methylenedianiline (MDA) in the five kinds of synthesized medical castor oil-polyurethane potting materials were detected by HPLC. The influences of γ-ray irradiation on the mechanical performance of the potting materials were also discussed quantitatively.The experimental results show that the amounts of produced MDA increases with γ-ray irradiation dosage. After 25 kGy γ-ray sterilization, the accumulated amounts of MDA in the five kinds of potting materials were 10.33, 10.37, 10.52, 10.59, 10.91 ? μg/g respectively. Those amounts are below the level of harm amount to human body. At the same time, the mechanical properties of the potting materials such as tensile strength, tear strength and hardness are improved because cross-linking happens under irradiation

  9. Effects of supplementation with vegetable oils, including castor oil, on milk production of ewes and on growth of their lambs.

    Science.gov (United States)

    Parente, Michelle de Oliveira Maia; Susin, Ivanete; Nolli, Cristine Paduan; Ferreira, Evandro Maia; Gentil, Renato Shinkai; Polizel, Daniel Montanher; Pires, Alexandre Vaz; Alves, Susana Paula; Bessa, Rui José Branquinho

    2018-02-15

    The objectives in this experiment were to compare the effects of castor oil, canola oil, or sunflower oil on lactation performance, milk composition, and milk fatty acid (FA) profile in Santa Inês ewes and on growth of lambs. Forty-four ewes (66.9 ± 4.7 kg of initial BW, mean ± SD) were penned individually with their lambs and used in a randomized complete block design with 11 blocks and four diets. The experimental diets were as follows: 1) basal diet without added oil (control), 2) 30 g FA/kg DM of canola oil (CAN), 3) 30 g FA/kg DM of sunflower oil (SUN), and 4) 30 g FA/kg DM of castor oil (CAS). The oils were added to a basal diet containing 50% of roughage. Once a week, from the 2nd to 8th wk of lactation, ewes were separated from their lambs, injected with oxytocin, and mechanically milked to empty the udder. After 3 h, using the same procedure, milk production was recorded, and milk was sampled for composition and FA profile determination. The growth of the lambs was monitored weekly. Ewes fed the control diet had greater (P oil-supplemented diets. No effect was observed on milk yield and on final BW of lambs. Milk fat and milk total solid concentrations were greater (P oil-supplemented diets reduced (P < 0.05) the content of 16:0 when compared with the control. Milk from ewes fed CAS presented only small proportion of 12-OH,c9-18:1 (0.31% of total FA) but much larger proportions of 12-OH-18:0 (1.58% of total FA) and particularly of 12-oxo-18:0 (2.95 % of total FA), which suggests that 12-OH,c9-18:1 was extensively metabolized in the rumen. Concluding, CAS increased milk fat and modified the milk FA composition by increasing the hydroxy- and oxo-FA. The potential health promoting proprieties and technological advantages of milk enriched with hydroxy- and oxo-FA are not know at present but deserve to be explored.

  10. Splice Variants of the Castor WRI1 Gene Upregulate Fatty Acid and Oil Biosynthesis When Expressed in Tobacco Leaves.

    Science.gov (United States)

    Ji, Xia-Jie; Mao, Xue; Hao, Qing-Ting; Liu, Bao-Ling; Xue, Jin-Ai; Li, Run-Zhi

    2018-01-05

    The plant-specific WRINKLED1 (WRI1) is a member of the AP2/EREBP class of transcription factors that positively regulate oil biosynthesis in plant tissues. Limited information is available for the role of WRI1 in oil biosynthesis in castor bean ( Ricinus connunis L.), an important industrial oil crop. Here, we report the identification of two alternatively spliced transcripts of RcWRI1 , designated as RcWRI1-A and RcWRI1-B . The open reading frames of RcWRI1-A (1341 bp) and RcWRI1-B (1332 bp) differ by a stretch of 9 bp, such that the predicted RcWRI1-B lacks the three amino acid residues "VYL" that are present in RcWRI1-A. The RcWRI1-A transcript is present in flowers, leaves, pericarps and developing seeds, while the RcWRI1-B mRNA is only detectable in developing seeds. When the two isoforms were individually introduced into an Arabidopsis wri1-1 loss-of-function mutant, total fatty acid content was almost restored to the wild-type level, and the percentage of the wrinkled seeds was largely reduced in the transgenic lines relative to the wri1-1 mutant line. Transient expression of each RcWRI1 splice isoform in N. benthamiana leaves upregulated the expression of the WRI1 target genes, and consequently increased the oil content by 4.3-4.9 fold when compared with the controls, and RcWRI1-B appeared to be more active than RcWRI1-A . Both RcWRI1-A and RcWRI1-B can be used as a key transcriptional regulator to enhance fatty acid and oil biosynthesis in leafy biomass.

  11. Splice Variants of the Castor WRI1 Gene Upregulate Fatty Acid and Oil Biosynthesis When Expressed in Tobacco Leaves

    Directory of Open Access Journals (Sweden)

    Xia-Jie Ji

    2018-01-01

    Full Text Available The plant-specific WRINKLED1 (WRI1 is a member of the AP2/EREBP class of transcription factors that positively regulate oil biosynthesis in plant tissues. Limited information is available for the role of WRI1 in oil biosynthesis in castor bean (Ricinus connunis L., an important industrial oil crop. Here, we report the identification of two alternatively spliced transcripts of RcWRI1, designated as RcWRI1-A and RcWRI1-B. The open reading frames of RcWRI1-A (1341 bp and RcWRI1-B (1332 bp differ by a stretch of 9 bp, such that the predicted RcWRI1-B lacks the three amino acid residues “VYL” that are present in RcWRI1-A. The RcWRI1-A transcript is present in flowers, leaves, pericarps and developing seeds, while the RcWRI1-B mRNA is only detectable in developing seeds. When the two isoforms were individually introduced into an Arabidopsis wri1-1 loss-of-function mutant, total fatty acid content was almost restored to the wild-type level, and the percentage of the wrinkled seeds was largely reduced in the transgenic lines relative to the wri1-1 mutant line. Transient expression of each RcWRI1 splice isoform in N. benthamiana leaves upregulated the expression of the WRI1 target genes, and consequently increased the oil content by 4.3–4.9 fold when compared with the controls, and RcWRI1-B appeared to be more active than RcWRI1-A. Both RcWRI1-A and RcWRI1-B can be used as a key transcriptional regulator to enhance fatty acid and oil biosynthesis in leafy biomass.

  12. Evaluating the effect of temperature on biodiesel production from castor oil

    Directory of Open Access Journals (Sweden)

    Carlos Alberto Guerrero Fajardo

    2010-05-01

    Full Text Available Problems arising between biofuels and food as raw materials have led to investigating the use of inedible raw materials for their production. This work was aimed at studying the effect of temperature on converting castor oil in biodiesel production. Oil transesterification with methanol was carried out using an alkaline catalyst (0.5% NaOH - water solution for 1 hour using a 6:1 alcohol/oil molar ratio, at atmospheric pressure and taking temperature as a free variable. The temperature was evaluated at 68°F, 86°F, 104°F and 122ºF. The reaction products were analyzed by gas chromatography (CG-FID for quantifying the fatty acid methyl esters (FAME present. The results showed different dispersion depending on temperature, finding that 122°F resulted in less dispersion than the others. CG-FID analysis showed that most FAME content was reached at 122ºF, such temperature giving the highest ricinoleic acid conversion rate. Gas chromatography also revealed that reaction time was adequate, in process conditions, for obtaining ricinoleic acid-based 94.26% con- version.

  13. High-yield production of biodiesel by non-catalytic supercritical methanol transesterification of crude castor oil (Ricinus communis)

    International Nuclear Information System (INIS)

    Román-Figueroa, Celián; Olivares-Carrillo, Pilar; Paneque, Manuel; Palacios-Nereo, Francisco Javier; Quesada-Medina, Joaquín

    2016-01-01

    The synthesis of biodiesel from crude castor oil in a catalyst-free process using supercritical methanol in a batch reactor was investigated, studying the evolution of intermediate products as well as the conversion of triglycerides and the yield of FAMEs (fatty acid methyl esters) (biodiesel). Experiments were carried out in a temperature range of 250–350 °C (10–43 MPa) at reaction times of 15–90 min for a methanol-to-oil molar ratio of 43:1. Maintaining thermal stability of biodiesel is one of the most important concerns in high-yield supercritical biodiesel production. Hence, thermal decomposition degree of FAMEs was also investigated in different reaction conditions. The maximum yield of FAMEs (96.5%) was obtained at 300 °C (21 MPa) and 90 min. Under these conditions, the conversion of triglycerides was complete, the yield of intermediate products was low (3.29 and 1.41% for monoglycerides and diglycerides, respectively), and thermal decomposition of FAMEs did not occur. The maximum degree of thermal decomposition (80.9%) was produced at 350 °C (43 MPa) and 90 min. Methyl ricinoleate, whose fatty acid chain was the most abundant (88.09 mol%) in castor oil, was very unstable above 300 °C and 60 min, leading to low yields of FAMEs under these conditions. - Highlights: • Supercritical synthesis of biodiesel from crude castor oil was investigated. • Supercritical methanolysis of crude castor oil reached a high yield of FAMEs. • Ricinoleic acid methyl ester was very unstable above 300 °C and 60 min reaction.

  14. Acyl-ACP thioesterases from castor (Ricinus communis L.): an enzymatic system appropriate for high rates of oil synthesis and accumulation.

    Science.gov (United States)

    Sánchez-García, Alicia; Moreno-Pérez, Antonio J; Muro-Pastor, Alicia M; Salas, Joaquín J; Garcés, Rafael; Martínez-Force, Enrique

    2010-06-01

    Acyl-acyl carrier protein (ACP) thioesterases are enzymes that terminate the intraplastidial fatty acid synthesis in plants by hydrolyzing the acyl-ACP intermediates and releasing free fatty acids to be incorporated into glycerolipids. These enzymes are classified in two families, FatA and FatB, which differ in amino acid sequence and substrate specificity. In the present work, both FatA and FatB thioesterases were cloned, sequenced and characterized from castor (Ricinus communis) seeds, a crop of high interest in oleochemistry. Single copies of FatA and FatB were found in castor resulting to be closely related with those of Jatropha curcas. The corresponding mature proteins were heterologously expressed in Escherichia coli for biochemical characterization after purification, resulting in high catalytic efficiency of RcFatA on oleoyl-ACP and palmitoleoyl-ACP and high efficiencies of RcFatB for oleoyl-ACP and palmitoyl-ACP. The expression profile of these genes displayed the highest levels in expanding tissues that typically are very active in lipid biosynthesis such as developing seed endosperm and young expanding leaves. The contribution of these two enzymes to the synthesis of castor oil is discussed. Copyright 2010 Elsevier Ltd. All rights reserved.

  15. Síntesis y caracterización de espumas flexibles de poliuretano obtenidas a partir de aceite de castor maleinizado Flexible polyurethane foam synthesis and characterization obtained from maleinizated castor oil

    Directory of Open Access Journals (Sweden)

    Paula Mazo

    2009-06-01

    Full Text Available En este trabajo se realiza la síntesis de espumas flexibles de poliuretano empleando un diseño experimental Taguchi, utilizando aceite de castor con y sin maleinización, se estudia la cinética de la reacción de esterificación del aceite por cuantificación de los grupos ácido (ASTM D4662 - 03 y se evalúan las propiedades mecánicas de las espumas (densidad, resistencia tensil, % elongación, resiliencia y dureza. Norma NTC 2019 Icontec obtenidas en función de las variables de síntesis (cantidad y tipo de catalizador, relación molar aceite castor (CO - aceite maleinizado (MACO, cantidad de agua y surfactante empleado. Se realizan análisis de FTIR y SEM para las espumas. Los resultados mostraron una cinética de primer orden con respecto al anhídrido. El aceite maleinizado (MACO incrementa la resistencia mecánica de las espumas, debido al mayor entrecruzamiento por la incorporación de grupos ácido.In this work, the synthesis of polyurethane flexible foam is realized with the experimental design Taguchi, using castor oil with and without maleinization. The kinetic reaction of oil esterification was monitored by estimating the number of acid groups (ASTM D4662 - 03, and the mechanical properties of the foam were studied, including density, tensile resistance, % elongation, resilience and hardness (Norm NTC 2019 Icontec. The influence of various synthesis parameters was investigated, namely amount and type of catalyst, molar ratio of castor oil (CO - maleinizated castor oil (MACO, amount of water and surfactant used. The foams were analyzed using FTIR and scanning electron microscopy (SEM. The results showed first order kinetics with respect to the anhydride. The maleinizated castor oil (MACO increased the mechanical resistance of the foam due to the greater interweaving by the incorporation of acid groups.

  16. Fabrication of modified hydrogenated castor oil/GPTMS-ZnO composites and effect on UV resistance of leather.

    Science.gov (United States)

    Ma, Jianzhong; Duan, Limin; Lu, Juan; Lyu, Bin; Gao, Dangge; Wu, Xionghu

    2017-06-16

    Leather products are made from the natural skin collagen fibers. It is vulnerable to the environmental factor such as solar ultraviolet irradiation in the using process. Therefore anti-UV performance is a very important quality, particularly for chrome-free leather. ZnO is a well-known UV absorber commonly used in the cosmetic industry. We have investigated its potential to increase the anti-UV performance of chrome-free leather. Modified hydrogenated castor oil/GPTMS-ZnO (MHCO/ GPTMS-ZnO) composites were prepared using spherical ZnO nanoparticles, hydrogenated castor oil, maleic anhydride and sodium bisulfite. MHCO/GPTMS-ZnO composites have better anti-UV ability and stability. MHCO/GPTMS-ZnO composites were applied to the leather processing. The treated samples were exposed to artificial sunlight. Anti-yellowing tests showed that MHCO/GPTMS-ZnO composites significantly improved anti-UV performance of leather.

  17. Solvent-free enzymatic synthesis of feruloylated structured lipids by the transesterification of ethyl ferulate with castor oil.

    Science.gov (United States)

    Sun, Shangde; Zhu, Sha; Bi, Yanlan

    2014-09-01

    A novel enzymatic route of feruloylated structured lipids synthesis by the transesterification of ethyl ferulate (EF) with castor oil, in solvent-free system, was investigated. The transesterification reactions were catalysed by Novozym 435, Lipozyme RMIM, and Lipozyme TLIM, among which Novozym 435 showed the best catalysis performance. Effects of feruloyl donors, reaction variables, and ethanol removal on the transesterification were also studied. High EF conversion (∼100%) was obtained under the following conditions: enzyme load 20% (w/w, relative to the weight of substrates), reaction temperature 90 °C, substrate molar ratio 1:1 (EF/castor oil), 72 h, vacuum pressure 10 mmHg, and 200 rpm. Under these conditions, the transesterification product consisted of 62.6% lipophilic feruloylated structured lipids and 37.3% hydrophilic feruloylated lipids. Copyright © 2014 Elsevier Ltd. All rights reserved.

  18. Synthesis and characterization of polyanhydride derived from castor oil; Sintese e caracterizacao de polianidrido derivado do oleo de mamona

    Energy Technology Data Exchange (ETDEWEB)

    Borges, Fernando de M.; Reis, Roberta Yonara Nascimento; Nobre, Francisco X.; Matos, Jose M.E., E-mail: robertayonara@gmail.com [Universidade Federal do Piaui (UFPI), Teresina, PI (Brazil)

    2015-07-01

    Polyanhydrides are biopolymers already used as drug carriers, that allow the controlled release of the drug in vivo. Currently, these polymers are produced from a polyol, such as ethyleneglycol. In this work we synthesized a polyanhydride from castor oil, from the derivatization of oil via alcoholysis reaction. The oil was then converted to a monoglyceride (MG) by alcoholysis reaction at 140 °C. The MG reacted with phthalic anhydride (PA) at 100 °C, forming the polymer P1. The polymer was characterized by FT-IR, {sup 1}H and {sup 13}C NMR. These techniques allowed confirmation of the polymer formation. (author)

  19. Effect of γ-radiation sterilization on the stability of polyurethane potting compounds based on castor oil/SMDI and caprolactone polyol/SMDI, used for hollow fibre haemodialyzer

    International Nuclear Information System (INIS)

    Jayabalan, M.; Lizymol, P.P.

    1997-01-01

    Stability of polyurethane potting compounds based on castor oil/SMDI and caprolactone polyol/SMDI in repeated gamma radiation sterilization was studied. Radiation-induced degradation and leaching of low molecular weight fragments are higher in castor oil based polyurethane than in caprolactone polyol based polyurethane. For castor oil and caprolactone polyol based polyurethanes degradation increases up to 5 Mrad dose of sterilization. Further increase of dose of sterilization decreases leaching in caprolactone polyol based polyurethane which has resulted from secondary reactions leading to crosslinking. In the case of castor oil based polyurethane such crosslinks undergo cleavage at 10 Mrad dose of sterilization. (author)

  20. Histologic and immunohistochemical evaluation of biocompatibility of castor oil polyurethane polymer with calcium carbonate in equine bone tissue.

    Science.gov (United States)

    Nóbrega, Fernanda S; Selim, Mariana B; Arana-Chavez, Victor E; Correa, Luciana; Ferreira, Márcio P; Zoppa, André L V

    2017-10-01

    OBJECTIVE To evaluate the efficacy of castor oil polyurethane polymer with calcium carbonate for use in a unicortical ostectomy on the dorsal surface of the third metacarpal bone of horses. ANIMALS 6 adult horses. PROCEDURES A unicortical ostectomy was created on the dorsal surface of both third metacarpal bones of each horse. Castor bean (Ricinus communis) oil polyurethane polymer with calcium carbonate was implanted into the ostectomy on 1 limb, and the ostectomy of the contralateral limb was left unfilled and served as a control sample. Ostectomy sites were evaluated histologically 120 days later. Biopsy specimens were obtained from the interface of bone and polymer or the interface of bone and newly formed tissue; specimens were processed for histomorphometric evaluation by use of light microscopy, immunohistochemical analysis, histochemical analysis, and transmission electron microscopy. RESULTS Osteoconductive activity of the biomaterial was confirmed by the presence of osteoblasts in the biopsy specimens. Absence of a chronic inflammatory response or foreign body reaction indicated biocompatibility. Expression of osteoblast markers was detected in the newly formed tissue. CONCLUSIONS AND CLINICAL RELEVANCE Results indicated that castor oil polyurethane polymer with calcium carbonate could be an acceptable compound for use as a bone substitute in horses with fractures in which bone filling is necessary.

  1. Effect of castor oil enrichment layer produced by reaction on the properties of PLA/HDI-g-starch blends.

    Science.gov (United States)

    Xiong, Zhu; Zhang, Lisheng; Ma, Songqi; Yang, Yong; Zhang, Chuanzhi; Tang, Zhaobin; Zhu, Jin

    2013-04-15

    Blends of entirely bio-sourced polymers, namely polylactide (PLA) and starch, have been melt-compounded by lab-scale co-extruder with castor oil (CO) as a plasticizer. The enrichment of castor oil on starch had great effect on the properties of the blends. If the castor oil was mainly dispersed in PLA matrix, the properties of the blends were poor, but when the hexamethylenediisocyanate (HDI) was grafted on starch granules the ready reactions between the hydroxyl on CO and the isocyante on the HDI-grafted starch (HGSTs) brought CO molecules enriched on starch particles. DSC analysis shows that the CO layer on starch has a positive effect on the crystallization of PLA in the ternary blend. The accumulation of CO on starch greatly improves the toughness and impact strength of PLA/starch blends. The grafting content of HDI on the starch granules primarily determined the compatibility and properties of the resulted blends. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Intake, nutrient apparent digestibility and ruminal constituents of sheep fed diets with canola, sunflower or castor oils

    Directory of Open Access Journals (Sweden)

    Michelle de Oliveira Maia

    2012-11-01

    Full Text Available The objective in this experiment was to determine the effects of feeding diets with canola, sunflower or castor oils on intake, nutrient apparent digestibility and ruminal constituents of crossbred Dorper × Santa Inês sheep. Four rumen-cannulated animals of 90.2±11.4 kg average body weight were assigned to a 4 × 4 latin square. Animals remained individually in cages for the metabolism assay and were fed diets containing roughage at 500 g/kg and concentrate based on ground corn and soybean meal also at 500 g/kg. No oil was added to the control diet, whereas the others had canola, sunflower or castor oils at 30 g/kg (DM basis. There was no difference for the intake of DM and nutrients, except for ether extract, which was greater when animals received oil. The digestibility coefficients of dry matter, organic matter, crude protein, non-fiber carbohydrates and neutral detergent fiber were not changed; however, the addition of oil increased the ether extract digestibility. The values of total digestible nutrients (TDN, g/kg of DM, digestible energy (DE, Mcal/kg of DM, TDN intake and DE intake also did not change with the addition of lipids. Concerning the ruminal constituents, the addition of vegetable oils reduced the concentrations of acetate, butyrate and total short-chain fatty acids. Adding canola, sunflower or castor oils at 30 g/kg in diets with 500 g roughage/kg and 500 g concentrate/kg does not impair the intake or digestibility of nutrients in sheep, although it reduces the concentration of short-chain fatty acids in the rumen.

  3. Effect of plant and row spacing on the yield and oil contents of castor ...

    African Journals Online (AJOL)

    Castor (Ricinus communis L.) is an industrial non edible oilseed adapted to drier areas. An experiment was conducted in the Central Rift Valley of Ethiopia to determine optimum plant population of castor variety Hiruy. Four plant (50, 60, 70 and 80 cm) and four row spacing (60,80,100 and 120 cm) were arranged in factorial ...

  4. Computational identification and phylogenetic analysis of the oil-body structural proteins, oleosin and caleosin, in castor bean and flax.

    Science.gov (United States)

    Hyun, Tae Kyung; Kumar, Dhinesh; Cho, Young-Yeol; Hyun, Hae-Nam; Kim, Ju-Sung

    2013-02-25

    Oil bodies (OBs) are the intracellular particles derived from oilseeds. These OBs store lipids as a carbon resource, and have been exploited for a variety of industrial applications including biofuels. Oleosin and caleosin are the common OB structural proteins which are enabling biotechnological enhancement of oil content and OB-based pharmaceutical formations via stabilizing OBs. Although the draft whole genome sequence information for Ricinus communis L. (castor bean) and Linum usitatissimum L. (flax), important oil seed plants, is available in public database, OB-structural proteins in these plants are poorly indentified. Therefore, in this study, we performed a comprehensive bioinformatic analysis including analysis of the genome sequence, conserved domains and phylogenetic relationships to identify OB structural proteins in castor bean and flax genomes. Using comprehensive analysis, we have identified 6 and 15 OB-structural proteins from castor bean and flax, respectively. A complete overview of this gene family in castor bean and flax is presented, including the gene structures, phylogeny and conserved motifs, resulting in the presence of central hydrophobic regions with proline knot motif, providing an evolutionary proof that this central hydrophobic region had evolved from duplications in the primitive eukaryotes. In addition, expression analysis of L-oleosin and caleosin genes using quantitative real-time PCR demonstrated that seed contained their maximum expression, except that RcCLO-1 expressed maximum in cotyledon. Thus, our comparative genomics analysis of oleosin and caleosin genes and their putatively encoded proteins in two non-model plant species provides insights into the prospective usage of gene resources for improving OB-stability. Copyright © 2012 Elsevier B.V. All rights reserved.

  5. Hematological and biochemical changes in rabbits exposed to castor oil (Ricinus communis under experimental conditions

    Directory of Open Access Journals (Sweden)

    Sahar M. Ahmed

    2017-11-01

    Full Text Available In the last few decades there has been an exponential growth in the field of herbal medicine. One such medicinal plant is Ricinus communis (Euphorbiaceae, which is commonly known as castor. All parts of the plant are important phloem, bark, leaves, flowers, seed and oil. The study was conducted on 15 mature rabbitsof either sex of 1-2 kg body weight and 1-2 years old. The animals were divided into three groups of 5 animals each. Animals of group I were exposed orally to ricin extract at a dose rate of 0.5 mg /kg b.wt. daily for 14 days, while those of group II were exposed orally to aqueous leaves extract 0.5mg /kg b.wt daily for 14 day, mean while those of group III were left as a control group not exposed. The dependent parameters in the study were hemoglobin (Hb concentration, total erythrocytes count, packed cells volume (PCV%, erythrocytes indices mean corpuscular volume (MCV, mean corpuscular hemoglobin (MCH, mean corpuscular hemoglobin concentration (MCHC, Total and differential leucocytes count (TLC and DLC, in addition to some biochemical tests of blood serum which obtained at day 14th post exposure. The results of the study were revealed that the ricin extract and leaf extract exhibited an effects on hematological pictures as the erythrocytes counts, erythrocytes indices, Hb concentration and PCV% decreased and the obvious effects were in the 14th day. Ricin extract was less effects on many dependent parameters in comparison with aqueous leaf extract. Total leucocytes count, neutrophils % was increased in both ricin and leaf extract, and the increasing were higher in the 7th day in Ricin extract group. The lymphocytes% was decreased. While monocytes, eosinophils, and basophils % did not show any significant changes in all groups. Neutrophil /lymphocyte (N/l, and monocyte /lymphocyte (M/l increased in both exposed groups. Cholesterol (Chol, Triglyceride (TGwere increased, while total protein (TPwas decreased, Albumin (Alb, Cortisol

  6. A comparison of the efficacy, adverse effects, and patient compliance of the sena-graph®syrup and castor oil regimens for bowel preparation.

    Science.gov (United States)

    Ghazikhanlou Sani, Karim; Jafari, Mahmood-Reza; Shams, Safar

    2010-01-01

    Sena-Graph syrup has recently been formulated by an Iranian pharmaceutical company for being used in bowel evacuation before radiography, colonoscopy and surgery. This study compares the efficacy, adverse effects and patient compliance of two bowel preparation regimens with castor oil and Sena-Graph syrup in of outpatients for Intravenous Urography (IVU). One hundred and fourteen consecutive outpatients were randomized to receive either the standard bowel preparation with 60 mL of castor oil or the test method with 60 mL of Sena-Graph syrup before IVU examination. Demographic data of patients and their prior bowel preparation experience were collected before the examination. Two radiologists, blinded to the method of bowel preparation, reviewed the radiographs and graded the bowel preparation. The compliance and acceptability of both regimens were assessed by using structured questionnaires filled by the patients. The Numbers, ages, weights and gender distribution of patients and their prior bowel preparation experience in the two groups did not differ significantly. The cleanliness scores for the castor oil and Sena-Graph group were 3.97 ± 0.971 and 4.87 ± 0.917, respectively. The results indicated that Sena-Graph syrup causes a better bowel cleansing compared castor oil. Adverse effects in Sena-Graph groups were significantly lower than the castor oil group. Acceptability of the regimen in patients who used Sena-Graph was higher than the other group. The Sena-Graph regimen is significantly more effective and better tolerated than of Castor oil regimen in bowel cleansing. The incidence and severity of the adverse effects from Castor oil was higher than Sena-Graph.

  7. Accelerated artificial aging of particleboards from residues of CCB treated Pinus sp. and castor oil resin

    Directory of Open Access Journals (Sweden)

    Marília da Silva Bertolini

    2013-04-01

    Full Text Available Tests simulating exposure to severe weather conditions have been relevant in seeking new applications for particleboard. This study aimed to produce particleboards with residues of CCB (chromium-copper-boron oxides impregnated Pinus sp. and castor oil-based polyurethane resin, and to evaluate their performance before and after artificial accelerated aging. Panels were produced with different particle mass, resin content and pressing time, resulting eight treatments. Particles moisture and size distribution were determined, beyond panel physical and mechanical properties, according to NBR14810-3: 2006. After characterization, treatments B and G (small adhesive consumption and better mechanical performance, respectively were chosen to artificial aging tests. Statistical results analysis showed best performances were achieved for waterproof aged samples, of both B and G treatments. As example, in treatment B, MOR and MOE values were 23 MPa and 2,297 MPa, samples before exposure; 26 MPa and 3,185 MPa, 32 MPa and 3,982 MPa for samples after exposure (non-sealed and sealed, respectively.

  8. Preparation and characterization of activated carbon from castor de-oiled cake

    Directory of Open Access Journals (Sweden)

    Viviana M. Ospina-Guarín

    2014-01-01

    Full Text Available Biomass residues have been used to produce activated carbons. On this process, the activation method and the raw composition determine the properties as porosity and surface area of the charcoal. After the extraction of castor oil, there is a solid byproduct (cake of low added value, which was used in the production of activated carbon to add value to this waste. For this purpose two traditional methods were used, first, physical activation using as activating agents steam, CO2 and mixture of both, and additionally chemical activation using K2CO3 as the activating agent. Some activated carbons were characterized using N2 adsorption isotherms, BET surface areas varied between 255.98 (m2/g and 1218.43 (m2/g. By SEM and EDS analysis was possible to observe that materials obtained by the two types of activation are principally amorphous and morphological characteristics of the carbon obtained by physical activation are very different from those obtained by chemical activation. Finally, through impregnation of inorganic phases of Ni and Mo was revealed that the high dispersion characteristics, these carbonaceous materials will have potential to be used as catalyst support.

  9. Evaluation of the properties of iron oxide-filled castor oil polyurethane

    Directory of Open Access Journals (Sweden)

    Eleonora Mussatti

    2013-02-01

    Full Text Available The aim of this study was to obtain and evaluate the electrical, thermal and mechanical properties of iron oxide-filled castor oil polyurethane (PU/Fe2O3. The iron oxide used in this study was a residue derived from the steel pickling process of a Brazilian steel rolling industry. Polymeric composites with different iron oxide volume fractions (2.5, 5.0, 7.5, 10.0 and 12.5% were prepared through the casting process followed by compression molding at room temperature. The composites were analyzed by FTIR, XRD and densities, tensile strength, Young's modulus, electrical and thermal conductivities measurements. By increasing the iron oxide content, the apparent density, tensile strength, Young's modulus and electrical conductivity values of the composites were also increased. The iron oxide additions did not change significantly the value of thermal conductivity (from 0.191 W.mK-1 for PU up to 0.340 W.mK-1 for PU enriched with 12.5% v/v of iron oxide. Thus, even at the higher iron oxide concentration, the compounds as well as the pure polyurethane can be classified as thermal insulators.

  10. Formulation, characterization and pharmacokinetics of praziquantel-loaded hydrogenated castor oil solid lipid nanoparticles.

    Science.gov (United States)

    Xie, Shuyu; Pan, Baoliang; Wang, Ming; Zhu, Luyan; Wang, Fenghua; Dong, Zhao; Wang, Xiaofang; Zhou, WenZhong

    2010-07-01

    The purpose of this study was to formulate praziquantel (PZQ)-loaded hydrogenated castor oil (HCO) solid lipid nanoparticles (SLN) to enhance the bioavailability and prolong the systemic circulation of the drug. PZQ was encapsulated into HCO nanoparticles by a hot homogenization and ultrasonication method. The physicochemical characteristics of SLN were investigated by optical microscope, scanning electron microscopy and photon correlation spectroscopy. Pharmacokinetics were studied after oral, subcutaneous and intramuscular administration in mice. The diameter, polydispersivity index, zeta potential, encapsulation efficiency and loading capacity of the nanoparticles were 344.0 +/- 15.1 nm, 0.31 +/- 0.08, -16.7 +/- 0.5 mV, 62.17 +/- 6.53% and 12.43 +/- 1.31%, respectively. In vitro release of PZQ-loaded HCO-SLN exhibited an initial burst release followed by a sustained release. SLN increased the bioavailability of PZQ by 14.9-, 16.1- and 2.6-fold, and extended the mean residence time of the drug from 7.6, 6.6 and 8.2 to 95.9, 151.6 and 48.2 h after oral, subcutaneous and intramuscular administration, respectively. The PZQ-loaded HCO-SLN could be a promising formulation to enhance the pharmacological activity of PZQ.

  11. Polyurethane Foams for Thermal Insulation Uses Produced from Castor Oil and Crude Glycerol Biopolyols.

    Science.gov (United States)

    Carriço, Camila S; Fraga, Thaís; Carvalho, Vagner E; Pasa, Vânya M D

    2017-07-02

    Rigid polyurethane foams were synthesized using a renewable polyol from the simple physical mixture of castor oil and crude glycerol. The effect of the catalyst (DBTDL) content and blowing agents in the foams' properties were evaluated. The use of physical blowing agents (cyclopentane and n-pentane) allowed foams with smaller cells to be obtained in comparison with the foams produced with a chemical blowing agent (water). The increase of the water content caused a decrease in density, thermal conductivity, compressive strength, and Young's modulus, which indicates that the increment of CO₂ production contributes to the formation of larger cells. Higher amounts of catalyst in the foam formulations caused a slight density decrease and a small increase of thermal conductivity, compressive strength, and Young's modulus values. These green foams presented properties that indicate a great potential to be used as thermal insulation: density (23-41 kg·m -3 ), thermal conductivity (0.0128-0.0207 W·m -1 ·K -1 ), compressive strength (45-188 kPa), and Young's modulus (3-28 kPa). These biofoams are also environmentally friendly polymers and can aggregate revenue to the biodiesel industry, contributing to a reduction in fuel prices.

  12. Evaluation of the Properties of Iron Oxide-Filled Castor Oil Polyurethane

    Directory of Open Access Journals (Sweden)

    Eleonora Mussatti

    2012-01-01

    Full Text Available The aim of this study was to obtain and evaluate the electrical, thermal and mechanical properties of iron oxide-filled castor oil polyurethane (PU/Fe2O3. The iron oxide used in this study was a residue derived from the steel pickling process of a Brazilian steel rolling industry. Polymeric composites with different iron oxide volume fractions (2.5, 5.0, 7.5, 10.0 and 12.5% were prepared through the casting process followed by compression molding at room temperature. The composites were analyzed by FTIR, XRD and densities, tensile strength, Young's modulus, electrical and thermal conductivities measurements. By increasing the iron oxide content, the apparent density, tensile strength, Young's modulus and electrical conductivity values of the composites were also increased. The iron oxide additions did not change significantly the value of thermal conductivity (from 0.191 W.mK-1 for PU up to 0.340 W.mK-1 for PU enriched with 12.5% v/v of iron oxide. Thus, even at the higher iron oxide concentration, the compounds as well as the pure polyurethane can be classified as thermal insulators.

  13. Subcutaneous tissue reaction to castor oil bean and calcium hydroxide in rats

    Directory of Open Access Journals (Sweden)

    Samira Esteves Afonso Camargo

    2010-06-01

    Full Text Available Castor oil bean cement (COB is a new material that has been used as an endodontic sealer, and is a candidate material for direct pulp capping. OBJECTIVE: The purpose of this study was to evaluate the biocompatibility of a new formulation of COB compared to calcium hydroxide cement (CH and a control group without any material, in the subcutaneous tissue of rats. MATERIAL AND METHODS: The materials were prepared, packed into polyethylene tubes, and implanted in the rat dorsal subcutaneous tissue. Animals were sacrificed at the 7th and 50th days after implantation. A quantitative analysis of inflammatory cells was performed and data were subjected to ANOVA and Tukey's tests at 5% significance level. RESULTS: Comparing the mean number of inflammatory cells between the two experimental groups (COB and CH and the control group, statistically significant difference (p=0.0001 was observed at 7 and 50 days. There were no significant differences (p=0.111 between tissue reaction to CH (382 inflammatory cells and COB (330 inflammatory cells after 7 days. After 50 days, significantly more inflammatory cells (p=0.02 were observed in the CH group (404 inflammatory cells than in the COB group (177 inflammatory cells. CONCLUSIONS: These results demonstrate that the COB cement induces less inflammatory response within long periods.

  14. Preparation and Characterization of Controlled-Release Avermectin/Castor Oil-Based Polyurethane Nanoemulsions.

    Science.gov (United States)

    Zhang, Hong; Qin, He; Li, Lingxiao; Zhou, Xiaoteng; Wang, Wei; Kan, Chengyou

    2017-06-12

    Avermectin (AVM) is a low-toxic and high-active biopesticide, but it can be easily degraded by UV light. In this paper, biodegradable castor oil-based polyurethanes (CO-PU) are synthesized and used as carriers to fabricate a new kind of AVM/CO-PU nanoemulsion through an emulsion solvent evaporation method, and the chemical structure, colloidal property, AVM loading capacity, controlled-release behavior, foliar adhesion, and photostability of the AVM/CO-PU drug delivery systems are investigated. Results show that AVM is physically encapsulated in the CO-PU carrier nanospheres, the diameter of the AVM/CO-PU nanoparticles is 85%. The release profiles indicate that the release rate is relatively high at the early stage and then slows, which can be adjusted by loaded AVM content, temperature, and pH of the release medium. The foliar pesticide retention of the AVM/CO-PU nanoemulsions is improved, and the photolysis rate of AVM in the AVM/CO-PU nanoparticles is significantly slower than that of the free AVM. A release mechanism of the AVM/CO-PU nanoemulsions is proposed, which is controlled by both diffusion and matrix erosion.

  15. The emulsion crystallization of hydrogenated castor oil into long thin fibers

    Science.gov (United States)

    De Meirleir, Niels; Pellens, Linda; Broeckx, Walter; De Malsche, Wim

    2013-11-01

    The present study discusses the optimal crystal growth conditions required for the emulsion crystallization of hydrogenated castor oil (HCO) into several crystal morphologies. The best possible crystal shape is furthermore identified in case high rheology modifying performance is required. HCO was crystallized in a meso- and micro-continuous process which allowed for a controlled and fast screening of several crystal morphologies at different crystallization conditions. Applying high isothermal temperatures (above 55 °C) resulted in a combination of rosettes, thick fibers and thin fibers. At lower isothermal temperatures (below 55 °C) the shape gradually evolved to a combination of short needles, spherically shaped and/or irregularly shaped crystals. Crystals with the highest aspect ratio were obtained when crystals were grown between 30 °C and 45 °C and were subsequently reheated above 63 °C, forming high amounts of large thin fibrous crystals. When diluted to 0.25 wt% these fibrous crystals increased the low shear viscosity far better compared to the other crystal shapes.

  16. Preparation and characterization of novel antibacterial castor oil-based polyurethane membranes for wound dressing application.

    Science.gov (United States)

    Yari, Abbas; Yeganeh, Hamid; Bakhshi, Hadi; Gharibi, Reza

    2014-01-01

    Preparation of novel antibacterial and cytocompatible polyurethane membranes as occlusive dressing, which can provide moist and sterile environment over mild exudative wounds is considered in this work. In this regard, an epoxy-terminated polyurethane (EPU) prepolymer based on castor oil and glycidyltriethylammonium chloride (GTEAC) as a reactive bactericidal agent were synthesized. Polyurethane membranes were prepared through cocuring of EPU and different content of GTEAC with 1,4-butane diamine. The physical and mechanical properties, as well as cytocompatibility and antibacterial performance of prepared membranes were studied. Depending on their chemical formulations, the equilibrium water absorption and water vapor transmission rate values of the membranes were in ranges of 3-85% and 53-154g m(-2) day(-1), respectively. Therefore, these transparent membranes can maintain for a long period the moist environment over the wounds with low exudates. Detailed cytotoxicity analysis of samples against mouse L929 fibroblast and MCA-3D keratinocyte cells showed good level of cytocompatibility of membranes after purification via extraction of residual unreacted GTEAC moieties. The antibacterial activity of the membranes against Escherichia coli and Staphylococcus aureus bacteria was also studied. The membrane containing 50% GTEAC exhibited an effective antibacterial activity, while showed acceptable cytocompatibility and therefore, can be applied as an antibacterial occlusive wound dressing. Copyright © 2013 Wiley Periodicals, Inc., a Wiley Company.

  17. Castor oil polymer induces bone formation with high matrix metalloproteinase-2 expression.

    Science.gov (United States)

    Saran, Wallace Rocha; Chierice, Gilberto Orivaldo; da Silva, Raquel Assed Bezerra; de Queiroz, Alexandra Mussolino; Paula-Silva, Francisco Wanderley Garcia; da Silva, Léa Assed Bezerra

    2014-02-01

    The aim of this study was to evaluate the modulation of matrix metalloproteinase-2 (MMP-2) and -9 (MMP-9) expression in newly formed bone tissue at the interface between implants derived from castor oil (Ricinus communis) polymer and the tibia medullary canal. Forty-four rabbits were assigned to either Group 1 (n = 12; control) or Group 2 (n = 30), which had the tibial medullary canals reamed bilaterally and filled with polymer. CT scans showed no space between the material surface and the bone at the implant/bone marrow interface, and the density of the tissues at this interface was similar to the density measured of other regions of the bone. At 90 days postimplantation, the interface with the polymer presented a thick layer of newly formed bone tissue rich in osteocytes. This tissue exhibited ongoing maturation at 120 and 150 days postimplantation. Overall, bone remodeling process was accompanied by positive modulation of MMP-2 and low MMP-9 expression. Differently, in control group, the internal surface close to the medullary canal was lined by osteoblasts, followed by a bone tissue zone with few lacunae filled with osteocytes. Maturation of the tissue of the medullary internal surface occurred in the inner region, with the bone being nonlamellar. © 2013 Wiley Periodicals, Inc.

  18. The role of nanocrystalline cellulose on the microstructure of foamed castor-oil polyurethane nanocomposites.

    Science.gov (United States)

    Cordero, Andrés Ignacio; Amalvy, Javier Ignacio; Fortunati, Elena; Kenny, José María; Chiacchiarelli, Leonel Matías

    2015-12-10

    Nanocrystalline cellulose (CNC), obtained by sulphuric acid hydrolysis, was used to synthesize polyurethane foams (PUFs) based on a functionalized castor oil polyol and a Methylene diphenyl diisocyanate (MDI). Formulations with varying isocyanate index (FI) and NCO number were prepared. At 0.5 wt.%, SEM's of the fractured surface underlined that the CNC acted both as a nucleation agent and as a particulate surfactant with cell geometries and apparent density changing selectively. The chemical structure of the PUF (FTIR) changed after the incorporation of CNC by a relative change of the amount of urea, urethane and isocyanurate groups. A low NCO number and isocyanate index contributed to the migration of the CNC to the Hard Segment (HS), acting as reinforcement and improving substantially the compressive mechanical properties (Ec and σc improvements of 63 and 50%, respectively). For a high NCO number or isocyanate index, the CNC migrated to the Soft Segment (SS), without causing a reinforcement effect. The migration of the CNC was also detected with DSC, TGA and DMA, furtherly supporting the hypothesis that a low NCO number and index contributed both to the formation of a microstructure with a higher content of urethane groups. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Gamma radiation effects on mechanical properties and morphology of a polyurethane derivate from castor oil

    Science.gov (United States)

    Azevedo, Elaine Cristina; Orivaldo Chierice, Gilberto; Claro Neto, Salvador; Scheidegger Soboll, Daniel; Mauro Nascimento, Eduardo; Lepienski, Carlos Mauricio

    2011-03-01

    In this study, an adhesive of a polyurethane derivate from castor oil was irradiated with gamma radiation from a 60Co source, at doses from 0.2 to 25 kGy. This adhesive polyurethane is considered for use in hospital furniture because it does not liberate dangerous solvents. Hardness and elastic modulus were measured by instrumented indentation with a pyramidal Berkovich indenter, using loads from 0.08-40 mN with a nanoindenter XP. The instrumented indentation hardness was 110 MPa for an untreated sample, increasing to 124 MPa after irradiation with 25 kGy, at penetration depths of about 5 μm. The increases in elastic modulus induced by radiation were less pronounced. This polyurethane is naturally cross-linked and the relative modifications in the hardness are attributed to an additional cross-linking process induced by radiation. X-ray diffraction indicates a slight increase in crystallinity. The roughness measured by atomic force microscopy increases after gamma irradiation.

  20. Polyurethane resins derived from castor oil (Ricinus communis) for tibial crest deviation in dogs

    International Nuclear Information System (INIS)

    Maria, P.P.; Padilha Filho, J.G.; Canola, J.C.; Castro, M.B.

    2004-01-01

    Medial patellar luxation is one of the most common orthopedic problems in small breeds of dogs and tibial crest deviation is a frequent accompaining anatomical abnormality. For that reason, the purpose of this study was to evaluate the behavior of castor oil derived polyurethane implants when apllied to experimental defects created on the medial side of the proximal tibia of normal puppies. Twelve dogs were randomly divided in 3 groups of 4 animals and were submitted to the same treatment. Histopathological study was performed respectively at 30 (GI), 60 (GII) and 90 (GIII) days post-surgery. Evaluations methods included clinical assessment, radiology, gross and macroscopic study, tomography and statistical analysis. Clinically, there were no signs of implant rejection. Radiology revealed intense periosteal reaction and new bone formation. On gross examination, there was thickening and lateral deviation of the tibial crest and new bone neoformation. On microscopic examination, there was fibrous tissue around the polyurethane, periosteal proliferation on the medial side of the tibia and no bone proliferation towards the implant. Cat scans reveled lateral deviation of the tibial crest in eleven animals, which was statistically significant (p [pt

  1. Performance and Emission Characteristics of a Compression Ignition Engine Operating on Blends of Castor Oil Biodiesel-Diesel

    Science.gov (United States)

    Kanwar, Roopesh; Sharma, Pushpendra Kumar; Singh, Aditya Narayan; Agrawal, Yadvendra Kumar

    2017-04-01

    Diesel vehicles are the nerves and veins of transportation, particularly in developing countries. With the rapid rate of modernization, increasing demand of fuel is inevitable. The exponential increase in fuel prices and the scarcity of its supply from the environment have promoted interest in the development of alternative sources of fuel. In this work, genus Ricinus communis L. was studied in order to delimit their potential as a raw material for biodiesel production. Further, castor oil, ethyl ester were prepared by transesterification using potassium hydroxide (KOH) as a catalyst and tested on a four-stroke, single-cylinder compression ignition engine. The test was carried out at a constant speed of 3000 rpm at different loads. The results represent a substantial decrease in carbon monoxide (CO) emission with an increasing biodiesel percentage. The reduction of CO in B05, B10, B15 and B20 averaged 11.75, 22.02, 24.23 and 28.79 %, respectively, compared to mineral diesel. The emission results of the comparative test indicated that CO, oxygen (O2) and smoke density emissions are found to be lower when the engine is filled with B05, B10, B15 and B20 as compared to mineral diesel, while carbon dioxide (CO2) and nitrogen oxide (NOx) with B05, B10, B15 and B20 are found to increase marginally. Brake thermal efficiency and brake specific fuel consumption decrease and increase respectively in biodiesel with different blends in comparison of mineral diesel.

  2. Dirt-binding particles consisting of hydrogenated castor oil beads constitute a nonirritating alternative for abrasive cleaning of recalcitrant oily skin contamination in a three-step programme of occupational skin protection.

    Science.gov (United States)

    Mahler, V; Erfurt-Berge, C; Schiemann, S; Michael, S; Egloffstein, A; Kuss, O

    2010-04-01

    In occupational fields with exposure to grease, oil, metal particles, coal, black lead or soot, cleansing formulations containing abrasive bodies (e.g. refined walnut shell, corn, wood, plastic or pumice) are used. These may constitute an irritant per se. As an alternative, hydrogenated castor oil (also known as castor wax) beads have been developed as dirt-binding particles. A polar surface contributes to their mechanical cleaning effects in removal of oily grime. Standardized examination of the in vivo effects upon the skin barrier of castor wax beads in comparison with abrasive bodies and pure detergent. Three cleansing preparations - (i) detergent, (ii) detergent containing castor wax beads, (iii) detergent containing walnut shell powder - were each repetitively applied in vivo (four times daily for 3 weeks), mimicking workplace conditions, in 30 healthy volunteers (15 with and 15 without an atopic skin diathesis) and compared vs. (iv) no treatment. The treatment effects upon the skin barrier were monitored by repeated measurements of functional parameters [transepidermal water loss (TEWL), redness] and surface topography. After a 3-week treatment, a significant global treatment effect (P dirt and use of skin protection and skin care measures under real workplace conditions, this component may now be used and examined further in different occupations.

  3. Evaluation of the effects of Olea europaea L. subsp. africana (Mill.) P.S. Green (Oleaceae) leaf methanol extract against castor oil-induced diarrhoea in mice.

    Science.gov (United States)

    Amabeoku, George J; Bamuamba, Kapinga

    2010-03-01

    Olea europaea L. subsp. africana (Mill.) P.S. Green is widely used in South Africa by traditional medicine practitioners to treat diarrhoea. However, little is known scientifically about this South African species in the treatment of diarrhoea. The main aim of the study therefore was to investigate the antidiarrhoeal effect of the leaf methanol extract of the plant species in mice. The antidiarrhoeal activity of the leaf methanol extract of O. europaea subsp. africana was studied using a castor oil-induced diarrhoeal test. The antipropulsive activity of the plant extract was also investigated using the charcoal meal transit test. Standard methods were used to investigate the acute toxicity and effect of O. europaea subsp. africana on castor oil-induced intraluminal fluid accumulation. Leaf methanol extract of O. europaea subsp. africana and loperamide, a standard antidiarrhoeal drug, significantly reduced the number of diarrhoeal episodes induced by castor oil, significantly decreased the stool mass, significantly delayed the onset of the diarrhoea and protected the animals against castor oil-induced diarrhoea. Both O. europaea subsp. africana and loperamide significantly decreased the gastrointestinal transit of charcoal meal and castor oil-induced intraluminal fluid accumulation in mice. The LD50 value was found to be 3475 mg/kg (p.o.). The results obtained suggest that the leaf methanol extract of O. europaea subsp. africana has an antidiarrhoeal property and that, given orally, it may be non-toxic and/or safe in mice.

  4. A Comparative Experimental Analysis of Tribological Properties Between Commercial Mineral Oil and Neat Castor Oil using Taguchi Method in Boundary Lubrication Regime

    OpenAIRE

    S. Bhaumik; S.D Pathak

    2016-01-01

    The present work aims to carry out a comparative experimental analysis of tribological properties of 372cSt mineral oil and 229cSt castor oil. The antiwear and extreme pressure properties of both the oils have been analysed according to ASTM G 99 and ASTM D-2783 standards. The surfaces of the balls and pins after tribo tests have been analysed using Scanning Electron Microscope (SEM) images. The present test results predict that the antiwear and extreme pressure properties in case of the sele...

  5. Tissue-specific expression and post-translational modifications of plant- and bacterial-type phosphoenolpyruvate carboxylase isozymes of the castor oil plant, Ricinus communis L.

    Science.gov (United States)

    O’Leary, Brendan; Fedosejevs, Eric T.; Hill, Allyson T.; Bettridge, James; Park, Joonho; Rao, Srinath K.; Leach, Craig A.; Plaxton, William C.

    2011-01-01

    This study employs transcript profiling together with immunoblotting and co-immunopurification to assess the tissue-specific expression, protein:protein interactions, and post-translational modifications (PTMs) of plant- and bacterial-type phosphoenolpyruvate carboxylase (PEPC) isozymes (PTPC and BTPC, respectively) in the castor plant, Ricinus communis. Previous studies established that the Class-1 PEPC (PTPC homotetramer) of castor oil seeds (COS) is activated by phosphorylation at Ser-11 and inhibited by monoubiquitination at Lys-628 during endosperm development and germination, respectively. Elimination of photosynthate supply to developing COS by depodding caused the PTPC of the endosperm and cotyledon to be dephosphorylated, and then subsequently monoubiquitinated in vivo. PTPC monoubiquitination rather than phosphorylation is widespread throughout the castor plant and appears to be the predominant PTM of Class-1 PEPC that occurs in planta. The distinctive developmental patterns of PTPC phosphorylation versus monoubiquitination indicates that these two PTMs are mutually exclusive. By contrast, the BTPC: (i) is abundant in the inner integument, cotyledon, and endosperm of developing COS, but occurs at low levels in roots and cotyledons of germinated COS, (ii) shows a unique developmental pattern in leaves such that it is present in leaf buds and young expanding leaves, but undetectable in fully expanded leaves, and (iii) tightly interacts with co-expressed PTPC to form the novel and allosterically-desensitized Class-2 PEPC heteromeric complex. BTPC and thus Class-2 PEPC up-regulation appears to be a distinctive feature of rapidly growing and/or biosynthetically active tissues that require a large anaplerotic flux from phosphoenolpyruvate to replenish tricarboxylic acid cycle C-skeletons being withdrawn for anabolism. PMID:21841182

  6. Propolis or cashew and castor oils effects on composition of Longissimus muscle of crossbred bulls finished in feedlot

    Directory of Open Access Journals (Sweden)

    Maribel Velandia Valero

    2014-12-01

    Full Text Available The natural additive products (propolis or essential oils, in replacing antibiotics, could be used as an alternative for feed strategies to improve animal production. This work was performed to evaluate the effect of natural additives as propolis or essential oils on meat quality of crossbred (Aberdeen Angus vs. Nellore bulls. Thirty bulls were kept in feedlot (individual pen for 55 d and randomly assigned to one of three diets (n = 10: control (CON, propolis (PRO, or essential oils (OIL. CON diet consists of corn silage (45% DM and concentrate (cracked corn, soybean meal, glycerin, limestone, and mineral salt, 55% DM. The PRO group received same CON diet plus 3 g animal-1 d-1 of propolis premix added to the concentrate. The OIL group received same CON diet and 3 g animal-1 d-1 of a premix (cashew Anacardium occidentale L. and castor Ricinus communis L. oils added to the concentrate. Fat thickness (5.0 mm, pH (5.9, Longissimus muscle area 58.0 cm², marbling, texture, color (L* = 36.6, a* = 17.3, and b* = 5.9, lipid oxidation (0.08 malonaldehyde kg-1 meat, and Warner-Bratzler shear force (3.3 kg were unaffected by the diet. PRO and OIL diets had no effect neither on moisture (73.7%, ashes (1.1%, protein (23.8%, and lipids (1.7%, fatty acid composition or polyunsaturated/saturated fatty acid (PUFA/ SFA, 0.13, and n-6/n-3 ratio (6.9 on Longissimus muscle. Addition of natural additives as propolis extract or cashew and castor oils in the diet of bulls when they are finished in a feedlot did not change meat qualities.

  7. Effects of sowing dates and different fertilizers on yield, yield components, and oil percentage of castor bean (Ricinus communis L.

    Directory of Open Access Journals (Sweden)

    parviz rezvani moghadam

    2009-06-01

    Full Text Available In order to study the effects of sowing dates and different fertilizers on yield, yield components, and oil percentage of castor bean, an experiment was conducted at Experimental station, College of Agriculture, Ferdowsi University of Mashhad, Iran in years 2004-2005. The experimental treatments comprised all combinations of four sowing dates (11 April, 25 April, 8 May and 22 May and three different fertilizers (cow manure (30 tons/ha, compost (30 tons/ha, chemical fertilizers (100 kg/ha N and 250 kg/ha of super phosphate and no fertilizer as control. Different characteristics such as plant height, main inflorescence height, number of inflorescence per plant, number of secondary stems per plant, number of capsules per plant, number of grain per plant, grain weight per plant, 100 seed weight, grain yield, oil percentage and oil yield were recorded. A factorial arrangement based on a randomized complete block design with three replications was used. The results showed by delaying sowing date grain yield, seed oil percentage and oil yield were decreased, but there was no significant differences between 25 April, 8 May and 22 May sowing dates. Harvest index and 100 seed weight did not affect by neither sowing dates nor fertilizer treatments. The highest number of branches per plant, number of fertile inflorescences per plant, number of fertile capsules per plant, number of grain per plant, grain weight per plant and biological yield were obtained at 8 May sowing date on chemical fertilizer. Percentage of seed oil, grain yield and oil yield was higher at the first sowing date (11 April in compost and chemical fertilizer treatments. Keywords: Castor bean, sowing date, fertilizer, grain yield, oil percentage.

  8. Blends of nitrile butadiene rubber/poly (vinyl chloride: The use of maleated anhydride castor oil based plasticizer

    Directory of Open Access Journals (Sweden)

    Indiah Ratna Dewi

    2016-06-01

    Full Text Available Recently, much attention has been focused on research to replace petroleum-based plasticizers, with biodegradable materials, such as biopolymer which offers competitive mechanical properties. In this study, castor oil was modified with maleic anhydride (MAH to produce bioplasticizer named maleated anhydride castor oil (MACO, and used in nitrile butadiene rubber (NBR/poly vinyl chloride (PVC blend. The effect of MACO on its cure characteristics and mechanical properties of NBR/PVC blend has been determined. The reactions were carried out at different castor oil (CO/xylene ratios, i.e. 1:0 and 1:1 by weight, and fixed CO/MAH ratio, 1:3 by mole. DOP, CO, and MACO were added into each NBR/PVC blend according to the formula. It was found that the viscosity and safe process level of NBR/PVC blend is similar from all plasticizer, however, MACO (1:0 showed the highest cure rate index (CRI. MACO-based plasticizer gave a higher value of the mechanical properties of the NBR/PVC blend as compared to DOP based plasticizer. MACO (1:1 based plasticizer showed a rather significance performance compared to another type of plasticizers both before and after aging. The value of hardness, elongation at break, tensile strength, and tear strength were 96 Shore A, 155.91 %, 19.15 MPa, and 74.47 MPa, respectively. From this result, NBR/PVC blends based on MACO plasticizer can potentially replace the DOP, and therefore, making the rubber blends eco-friendly.

  9. Effect of Hydro-Alcoholic Extract of Teucrium Polium on Castor Oil-Induced Diarrhea in Male Rat

    Directory of Open Access Journals (Sweden)

    Mohammad Allahtavakoli

    2013-06-01

    Full Text Available Background: Diarrhea is one of the world's health problems as the most common causes of death in children. In this study, the effect of Teucrium Polium (TP extract on diarrhea induced by castor oil has been studied. Materials and Methods: 30 male rats were divided into five equal groups containing extract with doses of 100, 200 and 600 mg/kg; diphenoxylate (5 mg/kg; and control group or vehicle (normal saline groups. One hour after feeding the drugs or vehicle in the volume of 10 ml/kg, 2 ml of castor oil were fed to each animal through an oral-gastric catheter. Then excrements of animals were separately observed in the cages for 4 hours and their quality, frequency and stool weight were determined. Data analysis was performed using one-way ANOVA and Tukey post-test and p<0.05 was considered as significant.Results: Diphenoxylate and 600 mg/kg dose of TP reduced the percentage of the weight loss of animals, their excretion frequency and defecation index (p< 0.001. The 600 mg/kg dose of TP decreased the fecal water content compared to the control group (p< 0.01.Conclusion: Based on our data, essential oil of TP has an effect similar to diphenoxylate on the reduction of osmotic diarrhea symptoms and also reduces the volume of excreted water

  10. Development of nine new microsatellite loci for the American beaver, Castor canadensis (Rodentia: Castoridae), and cross-species amplification in the European beaver, Castor fiber.

    Science.gov (United States)

    Pelz-Serrano, Karla; Munguia-Vega, Adrian; Piaggio, Antoinette J; Neubaum, Melissa; Munclinger, Pavel; Pártl, Adam; VAN Riper Iii, Charles; Culver, Melanie

    2009-03-01

    We developed nine new nuclear dinucleotide microsatellite loci for Castor canadensis. All loci were polymorphic, except for one. The number of alleles ranged from two to four and from five to 12 in populations from Arizona and Wisconsin, respectively. Average heterozygosity ranged from 0.13 to 0.86 per locus. Since cross-species amplification in Castor fiber was successful only in four loci, we tested also nine recently published C. canadensis loci in the Eurasian species. Eight of the published loci amplified; however, three were monomorphic. The number of alleles was lower in C. fiber than in C. canadensis at all loci tested. © 2009 The Authors. Journal compilation © 2009 Blackwell Publishing Ltd.

  11. VARIATIONS IN SEED TRAITS OF CASTOR (Ricinus communis ...

    African Journals Online (AJOL)

    The fatty acid composition of Malaysian castor seed oil reveals that ... ricinoleic acid content from India and Brazil castor bean oils were ... Standard cultural practices were applied to all plots. .... will influence the utilization of other nutrients by.

  12. Transport behavior of n-alkane penetrants into castor oil based polyurethane-polyester nonwoven fabric composites

    International Nuclear Information System (INIS)

    Satheesh Kumar, M.N.; Manjula, K.S.; Siddaramaiah

    2007-01-01

    Castor oil based polyurethane (PU)-polyester nonwoven fabric composites were fabricated by impregnating the polyester nonwoven fabric in a composition containing castor oil and diisocyanate. Composites were fabricated with two different isocyanates such as toluene-2,4-diisocyanate (TDI) and hexamethylene diisocyanate (HMDI). Transport behavior of n-alkane penetrants (pentane, hexane and heptane) into both PUs and PU-polyester nonwoven fabric composites were studied. Sorption studies were carried out at different temperatures. From the sorption results, the diffusion (D) and permeation (P) coefficients of penetrants have been calculated. Significant increase in the diffusion and permeation coefficients was observed with increase in the temperature of sorption experiments. Drastical reduction in diffusion and permeation coefficients was noticed in the composites compared to neat PUs. Attempts were made to estimate the empirical parameters like n, which suggests the mode of transport and K is a constant depends on the structural characteristics of the composite in addition to its interaction with penetrants. The temperature dependence of the transport coefficients has been used to estimate the activation energy parameter for diffusion (E D ) and permeation (E P ) processes from Arrhenius plots. Furthermore, the sorption results have been interpreted in terms of the thermodynamic parameters such as enthalpy (ΔH) and entropy (ΔS)

  13. Synthesis and Physicochemical Behaviour of Polyurethane-Multiwalled Carbon Nanotubes Nanocomposites Based on Renewable Castor Oil Polyols

    Directory of Open Access Journals (Sweden)

    Alaa Ali

    2014-01-01

    Full Text Available Polyurethanes (PUs are high performance materials, with vast industrial and engineering applications. In this research, effects of Multiwalled Carbon Nanotubes (MWCNTs on physicochemical properties of Castor Oil based Polyurethanes (COPUs were studied. MWCNTs were added in different weight percentages (0% to 1% wt in a castor oil based polyurethane (COPUs-MWCNTs nanocomposites. The composition, structure, and morphology of polyurethanes were characterized by Fourier transform infrared spectroscopy (FTIR, X-ray diffraction (XRD, scanning electron microscopy (SEM, field emission scanning electron microscopy (FESEM, and element detection by energy dispersive spectroscopy (EDX analysis, respectively. Thermal stability was studied by thermogravimetric analysis (TGA. Barrier properties and surface area studies were investigated by nitrogen permeability machine and BET technique. Mechanical properties were calculated by tensile universal testing machine. Results showed well dispersed MWCNTs in polyurethane matrix at different weight percentages. The best results were obtained with 0.3 wt% of MWCNTs in the composite. Surface area studies revealed presence of very few pores which is in a good agreement with barrier permeability, reduced up to ~68% in 1 wt% and ~70% in 0.5 wt% of MWCNTs in polymer matrix, with respect to pure COPUs samples.

  14. One-pot conjugated linoleic acid production from castor oil by Rhizopus oryzae lipase and resting cells of Lactobacillus plantarum.

    Science.gov (United States)

    Khaskheli, Abid Ali; Talpur, Farah Naz; Cebeci Aydin, Aysun; Jawaid, Sana; Surhio, Muhammad Ali; Afridi, Hassan Imran

    2017-10-01

    Conjugated linoleic acid (CLA) has attracted as novel type of fatty acids having unusual health-promoting properties such as anticarcinogenic and antiobesitic effects. The present work employed castor oil as substrate for one-pot production of CLA using washed cells of Lactobacillus plantarum (L. plantarum) and lipases as catalysts. Among the screened lipases, the lipase Rhizopus oryzae (ROL) greatly assisted resting cells to produce CLA. Mass spectral analysis of the product showed that two major isomers of CLA were produced in the reaction mixture i.e. cis-9, trans-11 56.55% and trans-10, cis-12 43.45%. Optimum factors for CLA synthesis were found as substrate concentration (8 mg/mL), pH (6.5), washed cell concentration (12% w/v), and incubation time of 20 h. Hence, the combination of ROL with L. plantarum offers one pot production of CLA selectively using castor oil as a cost-effective substrate.

  15. Possible anti-diarrhoeal potential of ethanol leaf extract of Chromolaena odorata in castor oil-induced rats.

    Science.gov (United States)

    Aba, Patrick Emeka; Joshua, Parker Elija; Ezeonuogu, Francis Chimaobi; Ezeja, Maxwell Ikechukwu; Omoja, Valentine Uneojo; Umeakuana, Paschal Ugochukwu

    2015-12-01

    Chromolaena odorata is a plant commonly used traditionally to treat ailments including diarrhoea in Nigeria. The ethanol leaf extract of C. odorata was studied for its anti-diarrhoeal activity using electrolyte test and castor oil-induced diarrhoea rats' models. Acute toxicity effect of the extract was also evaluated. The extract showed a dose-dependent protection against castor oil-induced diarrhoea at the tested doses (200 and 400 mg/kg body weights). The protection offered by pretreatment with 400 mg/kg body weight of the ethanol leaf extract of C. odorata with regards to reductions in the incidences of faecal wetness and rate of defaecations were statistically comparable to that achieved with Lomotil, a known anti-diarrhoeic drug. The result of the electrolyte test showed that the extract pretreated groups had significantly (p<0.05) lower potassium and sodium ions in their intestinal fluid when compared with the diarrhoeic untreated controls. This is well tolerated. The results indicate that the ethanol leaf extract of C. odorata is safe and possesses anti-diarrhoeal activity with electrolyte reabsorption proposed as the possible mechanism of action.

  16. Formulation, characterization, in vitro and in vivo evaluation of castor oil based self-nano emulsifying levosulpiride delivery systems.

    Science.gov (United States)

    Poorani, G; Uppuluri, Spandana; Uppuluri, Kiran Babu

    2016-09-01

    Levosulpiride (LSP) is a hydrophobic benzamide derivative used in the treatment of schizophrenia. SNEDDS were extensively practiced for systemic delivery of poorly aqueous soluble drugs to achieve maximum bioavailability. The present study was focussed on the formulation, optimisation and evaluation of LSP SNEDDS using castor oil, for enhancement of drug absorption and bioavailability. Pseudo-ternary phase diagram was plotted to identify the range of SNEDDS components. Twenty formulations were designed, prepared and characterised by its particle size, zeta potential, viscosity, and stability. In vitro dissolution data modelling was performed. Microscopy, FTIR and in vivo bioavailability studies were conducted for optimum formulation. Results, discussion and conclusion: F18 containing castor oil, 0.9 mL; PEG 600, 1.36 mL and Tween 80, 2.74 mL was found to be optimum. The optimised formulation had shown uniform globule size, no interactions of LSP with SNEDDS components and higher pharmacokinetic parameters than that of commercial preparation.

  17. Síntesis de espumas rígidas de poliuretano obtenidas a partir de aceite de castor y poliglicerol empleando calentamiento por microondas Synthesis of rigid polyurethane foams obtained from castor oil and polyglycerol using microwave heating

    Directory of Open Access Journals (Sweden)

    Paula Mazo

    2011-01-01

    Full Text Available En este trabajo se realizó la síntesis de espumas rígidas de poliuretano utilizando un macropoliol sintetizado a partir de aceite de castor y poliglicerol, se optimizó mediante un análisis de superficie de respuesta, empleando un diseño factorial 32, los factores evaluados fueron: cantidad de agua y de ácido tartárico, el cual actúa como agente entrecruzante y catalizador; se evalúaron las propiedades mecánicas de las espumas como: densidad aparente (ASTM D1622-08, resistencia a la compresión (ASTM D1621, conductividad térmica (ASTM C177-04 y friabilidad (ASTM C421-8; se realizó Microscopia Electrónica de Barrido (SEM y Análisis de Calorimetría Diferencial de Barrido (DSC. El macropoliol fue obtenido desde fuentes renovables, mediante la transesterificación de Aceite de Castor (CO ó Aceite de Castor Maleinizado (MACO con Poliglicerol (PG. Se evalúo el efecto de las microondas en las reacciones, donde se encuentra una disminución del tiempo; el seguimiento y la caracterización de los productos intermedios se realiza mediante la cuantificación de valor ácido por titulación (ASTM D4662-03 y número de hidroxilos (ASTM D4274-05.In this work we showed the polyurethane rigid foams synthesis using a macropolyol synthesized from castor oil and polyglycerol. This process is optimized employing a response surface analysis and using a 3² factorial design. The factors evaluated were: amount of water and tartaric acid, where tartaric acid acts as crosslinking agent and catalyst; mechanical properties of foams were evaluated as bulk density (ASTM D1622-08, compressive strength (ASTM D1621, thermal conductivity (ASTM C177-04, and friability (ASTM C421-8; scanning electronic microscopic (SEM and differential scanning calorimetry (DSC. The macropolyol was obtained from renewable sources by the transesterification of castor oil (CO or maleinized castor oil (MACO and polyglycerol (PG. The effect of microwaves on the reactions was

  18. Acute toxicity study of tilmicosin-loaded hydrogenated castor oil-solid lipid nanoparticles

    Directory of Open Access Journals (Sweden)

    Xie Shuyu

    2011-11-01

    Full Text Available Abstract Background Our previous studies demonstrated that tilmicosin-loaded hydrogenated castor oil solid lipid nanoparticles (Til-HCO-SLN are a promising formulation for enhanced pharmacological activity and therapeutic efficacy in veterinary use. The purpose of this work was to evaluate the acute toxicity of Til-HCO-SLN. Methods Two nanoparticle doses were used for the study in ICR mice. The low dose (766 mg/kg.bw with tilmicosin 7.5 times of the clinic dosage and below the median lethal dose (LD50 was subcutaneously administered twice on the first and 7th day. The single high dose (5 g/kg.bw was the practical upper limit in an acute toxicity study and was administered subcutaneously on the first day. Blank HCO-SLN, native tilmicosin, and saline solution were included as controls. After medication, animals were monitored over 14 days, and then necropsied. Signs of toxicity were evaluated via mortality, symptoms of treatment effect, gross and microscopic pathology, and hematologic and biochemical parameters. Results After administration of native tilmicosin, all mice died within 2 h in the high dose group, in the low dose group 3 died after the first and 2 died after the second injections. The surviving mice in the tilmicosin low dose group showed hypoactivity, accelerated breath, gloomy spirit and lethargy. In contrast, all mice in Til-HCO-SLN and blank HCO-SLN groups survived at both low and high doses. The high nanoparticle dose induced transient clinical symptoms of treatment effect such as transient reversible action retardation, anorexy and gloomy spirit, increased spleen and liver coefficients and decreased heart coefficients, microscopic pathological changes of liver, spleen and heart, and minor changes in hematologic and biochemical parameters, but no adverse effects were observed in the nanoparticle low dose group. Conclusions The results revealed that the LD50 of Til-HCO-SLN and blank HCO-SLN exceeded 5 g/kg.bw and thus the

  19. Synthesis and application of a novel environmental C26 diglycidyl ester plasticizer based on castor oil for poly(vinyl chloride)

    Science.gov (United States)

    In this work, for the first time, a castor oil derived diglycidyl ester plasticizer (C26-DGE) was prepared and incorporated into poly(vinyl chloride) (PVC). The chemical structure of the product was characterized by Fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance (...

  20. Traditional crop for biodiesel. Castor oil could be an alternative, but it is a problematic additive; Traditionspflanze fuer Biodiesel. Rizinusoel koennte eine Alternative sein - problematisch als Beimischung

    Energy Technology Data Exchange (ETDEWEB)

    Ristau, Oliver

    2012-11-01

    As the demand for energy crops like soy is increasing, so are prices. The castor-oil plant may soon become one of these crops. An Israeli-Brazilian cooperation project is to raise the yields of this old culture plant and make it profitable.

  1. Ectopic overexpression of castor bean LEAFY COTYLEDON2 (LEC2 in Arabidopsis triggers the expression of genes that encode regulators of seed maturation and oil body proteins in vegetative tissues

    Directory of Open Access Journals (Sweden)

    Hyun Uk Kim

    2014-01-01

    Full Text Available The LEAFY COTYLEDON2 (LEC2 gene plays critically important regulatory roles during both early and late embryonic development. Here, we report the identification of the LEC2 gene from the castor bean plant (Ricinus communis, and characterize the effects of its overexpression on gene regulation and lipid metabolism in transgenic Arabidopsis plants. LEC2 exists as a single-copy gene in castor bean, is expressed predominantly in embryos, and encodes a protein with a conserved B3 domain, but different N- and C-terminal domains to those found in LEC2 from Arabidopsis. Ectopic overexpression of LEC2 from castor bean under the control of the cauliflower mosaic virus (CaMV 35S promoter in Arabidopsis plants induces the accumulation of transcripts that encodes five major transcription factors (the LEAFY COTYLEDON1 (LEC1, LEAFY COTYLEDON1-LIKE (L1L, FUSCA3 (FUS3, and ABSCISIC ACID INSENSITIVE 3 (ABI3 transcripts for seed maturation, and WRINKELED1 (WRI1 transcripts for fatty acid biosynthesis, as well as OLEOSIN transcripts for the formation of oil bodies in vegetative tissues. Transgenic Arabidopsis plants that express the LEC2 gene from castor bean show a range of dose-dependent morphological phenotypes and effects on the expression of LEC2-regulated genes during seedling establishment and vegetative growth. Expression of castor bean LEC2 in Arabidopsis increased the expression of fatty acid elongase 1 (FAE1 and induced the accumulation of triacylglycerols, especially those containing the seed-specific fatty acid, eicosenoic acid (20:1Δ11, in vegetative tissues.

  2. Ectopic overexpression of castor bean LEAFY COTYLEDON2 (LEC2) in Arabidopsis triggers the expression of genes that encode regulators of seed maturation and oil body proteins in vegetative tissues.

    Science.gov (United States)

    Kim, Hyun Uk; Jung, Su-Jin; Lee, Kyeong-Ryeol; Kim, Eun Ha; Lee, Sang-Min; Roh, Kyung Hee; Kim, Jong-Bum

    2013-01-01

    The LEAFY COTYLEDON2 (LEC2) gene plays critically important regulatory roles during both early and late embryonic development. Here, we report the identification of the LEC2 gene from the castor bean plant (Ricinus communis), and characterize the effects of its overexpression on gene regulation and lipid metabolism in transgenic Arabidopsis plants. LEC2 exists as a single-copy gene in castor bean, is expressed predominantly in embryos, and encodes a protein with a conserved B3 domain, but different N- and C-terminal domains to those found in LEC2 from Arabidopsis. Ectopic overexpression of LEC2 from castor bean under the control of the cauliflower mosaic virus (CaMV) 35S promoter in Arabidopsis plants induces the accumulation of transcripts that encodes five major transcription factors (the LEAFY COTYLEDON1 (LEC1), LEAFY COTYLEDON1-LIKE (L1L), FUSCA3 (FUS3), and ABSCISIC ACID INSENSITIVE 3 (ABI3) transcripts for seed maturation, and WRINKELED1 (WRI1) transcripts for fatty acid biosynthesis), as well as OLEOSIN transcripts for the formation of oil bodies in vegetative tissues. Transgenic Arabidopsis plants that express the LEC2 gene from castor bean show a range of dose-dependent morphological phenotypes and effects on the expression of LEC2-regulated genes during seedling establishment and vegetative growth. Expression of castor bean LEC2 in Arabidopsis increased the expression of fatty acid elongase 1 (FAE1) and induced the accumulation of triacylglycerols, especially those containing the seed-specific fatty acid, eicosenoic acid (20:1(Δ11)), in vegetative tissues.

  3. Ectopic overexpression of castor bean LEAFY COTYLEDON2 (LEC2) in Arabidopsis triggers the expression of genes that encode regulators of seed maturation and oil body proteins in vegetative tissues☆

    Science.gov (United States)

    Kim, Hyun Uk; Jung, Su-Jin; Lee, Kyeong-Ryeol; Kim, Eun Ha; Lee, Sang-Min; Roh, Kyung Hee; Kim, Jong-Bum

    2013-01-01

    The LEAFY COTYLEDON2 (LEC2) gene plays critically important regulatory roles during both early and late embryonic development. Here, we report the identification of the LEC2 gene from the castor bean plant (Ricinus communis), and characterize the effects of its overexpression on gene regulation and lipid metabolism in transgenic Arabidopsis plants. LEC2 exists as a single-copy gene in castor bean, is expressed predominantly in embryos, and encodes a protein with a conserved B3 domain, but different N- and C-terminal domains to those found in LEC2 from Arabidopsis. Ectopic overexpression of LEC2 from castor bean under the control of the cauliflower mosaic virus (CaMV) 35S promoter in Arabidopsis plants induces the accumulation of transcripts that encodes five major transcription factors (the LEAFY COTYLEDON1 (LEC1), LEAFY COTYLEDON1-LIKE (L1L), FUSCA3 (FUS3), and ABSCISIC ACID INSENSITIVE 3 (ABI3) transcripts for seed maturation, and WRINKELED1 (WRI1) transcripts for fatty acid biosynthesis), as well as OLEOSIN transcripts for the formation of oil bodies in vegetative tissues. Transgenic Arabidopsis plants that express the LEC2 gene from castor bean show a range of dose-dependent morphological phenotypes and effects on the expression of LEC2-regulated genes during seedling establishment and vegetative growth. Expression of castor bean LEC2 in Arabidopsis increased the expression of fatty acid elongase 1 (FAE1) and induced the accumulation of triacylglycerols, especially those containing the seed-specific fatty acid, eicosenoic acid (20:1Δ11), in vegetative tissues. PMID:24363987

  4. Studies on biodegradable and crosslinkable poly(castor oil fumarate)/poly(propylene fumarate) composite adhesive as a potential injectable biomaterial.

    Science.gov (United States)

    Mitha, M K; Jayabalan, M

    2009-12-01

    Biodegradable hydroxyl terminated-poly(castor oil fumarate) (HT-PCF) and poly(propylene fumarate) (HT-PPF) resins were synthesized as an injectable and in situ-cross linkable polyester resins for orthopedic applications. An injectable adhesive formulation containing this resin blend, N-vinyl pyrrolidone (NVP), hydroxy apatite, free radical initiator and accelerator was developed. The Composite adhesives containing the ratio of resin blend and NVP, 2.1:1.5, 2.1:1.2 and 2.1:1.0 set fast with tolerable exothermic temperature as a three dimensionally cross linked toughened material. Crosslink density and mechanical properties of the crosslinked composite increase with increase of NVP. The present crosslinked composite has hydrophilic character and cytocompatibility with L929 fibroblast cells.

  5. NTP technical report on the toxicity studies of Castor Oil (CAS No. 8001-79-4) in F344/N Rats and B6C3F1 Mice (Dosed Feed Studies).

    Science.gov (United States)

    Irwin, R

    1992-03-01

    Castor oil is a natural oil derived from the seeds of the castor bean, Ricinus communis. It is comprised largely of triglycerides with a high ricinolin content. Toxicity studies with castor oil were performed by incorporating the material at concentrations as high as 10% in diets given to F344/N rats and B6C3F1 mice of both sexes for 13 weeks. Genetic toxicity studies also were performed and were negative for mutation induction in Salmonella typhimurium, for induction of sister chromatid exchanges or chromosomal aberrations in Chinese hamster ovary cells, and for induction of micronuclei in the peripheral blood erythrocytes of mice evaluated at the end of the 13-week studies. Exposure to castor oil at dietary concentrations as high as 10% in 13-week studies did not affect survival or body weight gains of rats or mice (10 per sex and dose). There were no biologically significant effects noted in hematologic analyses in rats. Mild increases in total bile acids and in serum alkaline phosphatase were noted at various times during the studies in rats receiving the higher dietary concentrations of castor oil. Liver weights were increased in male rats receiving the 10% dietary concentration and in male and female mice receiving diets containing 5% or 10% castor oil. However, there were no histopathologic lesions associated with these liver changes, nor were there any compound-related morphologic changes in any organ in rats or mice. No significant changes were noted in a screening for male reproductive endpoints, including sperm count and motility, and no changes were observed in the length of estrous cycles of rats or mice given diets containing castor oil. Thus, no significant adverse effects of castor oil administration were noted in these studies. Synonyms: Ricinus Oil, oil of Palma Christi, tangantangan oil, phorboyl, Neoloid.

  6. Diversity of Castor (Ricinus communis L.) in Ethiopia አህፅርኦት ...

    African Journals Online (AJOL)

    In Ethiopia, Castor grows as annual in the low lands to small tree perennial in the high lands. India, china, Brazil and USA are the major castor producers globally. Castor bears seeds that containing highly valuable industrial oil. Castor oil is unique among vegetable oil because it is the only commercial source of a ...

  7. Thermal stability and fracture toughness of epoxy resins modified with epoxidized castor oil and Al2O3 nanoparticles

    International Nuclear Information System (INIS)

    Zhu, Lin; Jin, Fanlong; Park, Soojin

    2012-01-01

    This study examined the effects of the epoxidized castor oil (ECO) and Al 2 O 3 content on the thermal stability and fracture toughness of the diglycidylether of bisphenol-A (DGEBA)/ECO/Al 2 O 3 ternary composites using a range of techniques. The thermal stability of the composites was decreased by the addition of ECO and Al 2 O 3 nanoparticles. The fracture toughness of the composites was improved significantly by the addition of ECO and Al 2 O 3 nanoparticles. The composite containing 3 wt % Al 2 O 3 nanoparticles showed the maximum flexural strength. Scanning electron microscopy (SEM) revealed tortuous cracks in the DGEBA/ECO/Al 2 O 3 composites, which prevented deformation and crack propagation

  8. Bio-aviation fuel production from hydroprocessing castor oil promoted by the nickel-based bifunctional catalysts.

    Science.gov (United States)

    Liu, Siyang; Zhu, Qingqing; Guan, Qingxin; He, Liangnian; Li, Wei

    2015-05-01

    Bio-aviation fuel was firstly synthesized by hydroprocessing castor oil in a continuous-flow fixed-bed microreactor with the main objective to obtain the high yield of aviation fuel and determine the elemental compositions of the product phases as well as the reaction mechanism. Highest aviation range alkane yields (91.6 wt%) were achieved with high isomer/n-alkane ratio (i/n) 4.4-7.2 over Ni supported on acidic zeolites. In addition, different fuel range alkanes can be obtained by adjusting the degree of hydrodeoxygenation (HDO) and hydrocracking. And the observations are rationalized by a set of reaction pathways for the various product phases. Copyright © 2015 Elsevier Ltd. All rights reserved.

  9. Evaluation of the Optimal Reaction Conditions for the Methanolysis and Ethanolysis of Castor Oil Catalyzed by Immobilized Enzymes

    DEFF Research Database (Denmark)

    Andrade, Thalles Allan; Al-Kabalawi, Ibrahim F.; Errico, Massimiliano

    :1 methanol-to-oil molar ratio, 5 wt% of enzymes, 7.5 wt% of water, 50 wt% n-hexane, at 50 °C. The fatty acid methyl esters content was 96.8 % and 1.0 % FFA. Regarding the reactions with ethanol, 98.0 % fatty acid ethyl ester was obtained and 1.3 % FFA, when the reaction was carried out at 60 °C, 4:1 ethanol......As an alternative to the use of chemical catalysts, immobilized enzyme Lipozyme 435 was evaluated as catalyst for biodiesel production, comparing its efficiency in the castor oil transesterification with methanol and ethanol. Different reaction conditions were assessed and optimized, including...... the reaction temperature (35 – 60 °C), alcohol-to-oil molar ratio (from 3:1 to 6:1), amount of catalyst (from 3 to 15 wt% by weight of oil), addition of water (0 – 15 wt%), and use of n-hexane as a solvent (0 – 75 wt%). For the transesterification with methanol, the optimal reaction conditions were 3...

  10. Mechanical and thermal properties of castor oil polyurethane bone cement after gamma irradiation;Propriedades mecanicas e termicas de poliuretanas derivadas do oleo de mamona usadas como cimento osseo depois da irradiacao com radiacao gamma

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, E.C. [Universidade Tecnologica Federal do Parana (DF/UTFPR), Curitiba, PR (Brazil). Dept. de Fisica; Soboll, D.S. [Universidade Tecnologica Federal Parana (CPGEI/UTFPR), Curitiba, PR (Brazil); Chierice, G.O.; Claro Neto, S. [Universidade de Sao Paulo (IQSC/USP), Sao Carlos, SP (Brazil). Inst. de Quimica; Lepiesnki, C.M. [Universidade Federal do Parana (DF/UFPR), Curitiba, PR (Brazil). Dept. de Fisica; Nascimento, E.M. [Universidade Tecnologica Federal do Parana (DM/UTFPR), Curitiba (Brazil). Dept. de Mecanica

    2009-07-01

    Polyurethanes from castor oil are being employed as bone cement in medical applications. In this work the thermal and mechanical properties of gamma irradiated polyurethanes derivative from castor oil were investigated by instrumented indentation, thermogravimetry and scanning electron microscopy. A slightly increase in hardness is observed only for doses as high as 100 kGy. Thermal analysis indicates stability at human body temperature. The glass transition temperature has small changes after gamma irradiation. (author)

  11. Influence of the reaction conditions on the enzyme catalyzed transesterification of castor oil: A possible step in biodiesel production.

    Science.gov (United States)

    Andrade, Thalles A; Errico, Massimiliano; Christensen, Knud V

    2017-11-01

    The identification of the influence of the reaction parameters is of paramount importance when defining a process design. In this work, non-edible castor oil was reacted with methanol to produce a possible component for biodiesel blends, using liquid enzymes as the catalyst. Temperature, alcohol-to-oil molar ratio, enzyme and added water contents were the reaction parameters evaluated in the transesterification reactions. The optimal conditions, giving the optimal final FAME yield and FFA content in the methyl ester-phase was identified. At 35°C, 6.0 methanol-to-oil molar ratio, 5wt% of enzyme and 5wt% of water contents, 94% of FAME yield and 6.1% of FFA in the final composition were obtained. The investigation was completed with the analysis of the component profiles, showing that at least 8h are necessary to reach a satisfactory FAME yield together with a minor FFA content. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. Effect of temperature and composition on density, viscosity and thermal conductivity of fatty acid methyl esters from soybean, castor and Jatropha curcas oils

    International Nuclear Information System (INIS)

    Ustra, Mara K.; Silva, Juliana R.F.; Ansolin, Marina; Balen, Manuela; Cantelli, Keli; Alkimim, Isabella P.; Mazutti, Marcio A.; Voll, Fernando A.P.; Cabral, Vladimir F.; Cardozo-Filho, Lúcio; Corazza, Marcos L.; Vladimir Oliveira, J.

    2013-01-01

    Highlights: ► Thermophysical properties of soybean, castor and Jatropha curcas oils and related systems. ► Effect of temperature and composition on density, viscosity and thermal conductivity of the systems studied. ► Density, dynamic viscosity and thermal conductivity data were correlated using empirical equations. -- Abstract: This work is focused on experimental determination of density, viscosity and thermal conductivity as a function of temperature and composition for fatty acid methyl esters (FAME) from soybean, castor and Jatropha curcas oils. Results show that an increase in temperature, over the range of (273 to 363) K, resulted in a decrease of all properties studied. FAME from soybean and J. curcas oils presented similar rheological behaviour, while FAME from castor oil presented higher values for density and viscosity. Density, dynamic viscosity and thermal conductivity data for all systems obtained here were correlated using empirical equations with good agreement between experimental and calculated values. Experimental data presented here may be useful as a database for specification purposes and equipment design and plant operation in the biodiesel industry

  13. The In Vitro-In Vivo Safety Confirmation of PEG-40 Hydrogenated Castor Oil as a Surfactant for Oral Nanoemulsion Formulation.

    Science.gov (United States)

    Rachmawati, Heni; Novel, Miranti Anggraeni; Ayu, Sri; Berlian, Guntur; Tandrasasmita, Olivia Mayasari; Tjandrawinata, Raymond Rubianto; Anggadiredja, Kusnandar

    2017-03-31

    Evaluation on the safety use of high concentration of polyoxyl 40 (PEG-40) hydrogenated castor oil as a surfactant for oral nanoemulsion was performed in Webster mice. As previously reported, nearly 20% of PEG-40 hydrogenated castor oil was used to emulsify the glyceryl monooleate (GMO) as an oil to the aqueous phase. Thermodynamically stable and spontaneous nanoemulsion was formed by the presence of co-surfactant polyethylene glycol 400 (PEG-400). Standard parameters were analyzed for nanoemulsion including particle size and particle size distribution, the surface charge of nanoemulsion, and morphology. To ensure the safety of this nanoemulsion, several cell lines were used for cytotoxicity study. In addition, 5000 mg/kg body weight (BW) of the blank nanoemulsion was given orally to Webster mice once a day for 14 days. Several parameters such as gross anatomy, body weight, and main organs histopathology were observed. In particular, by considering the in vivo data, it is suggested that nanoemulsion composed with a high amount of PEG-40 hydrogenated castor oil is acceptable for oral delivery of active compounds.

  14. Optimization of transesterification reaction conditions for the production of biodiesel from oil blend of castor bean and soybean; Otimizacao das condicoes reacionais de transesterizacao para producao de biodiesel a partir de mistura de oleos de mamona e soja

    Energy Technology Data Exchange (ETDEWEB)

    Lobato, Ana Katerine de Carvalho Lima; Lima, Milena Gouveia Oliveira de; Pontes, Luiz Antonio M.; Teixeira, Leonardo S.G. [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil); Almeida, Daniel Freire; Costa, Tales Santana Martins; Menezes; Mateus Della Cella; Santos, Iran Talis Viana; Almeida, Selmo Q. [Universidade Salvador (UNIFACS), BA (Brazil)

    2012-07-01

    Biodiesel is an alternative fuel to diesel oil, and industrially obtained by the transesterification of triglycerides of fatty acids from vegetable oils and/or animal fats. Currently, the main raw material used to produce biodiesel in Brazil is soybean oil. The inclusion of other raw materials from different cultures in this sector is important and aims to reduce dependence on a single oilseed, assign specific characteristics to the product and encourage the development of family farming. The use of blends of soybean oil and castor for biodiesel may prove an important strategy to minimize the negative effects and maximize the positives of each oilseed. In this work, we carried out an experimental study using full factorial design 2{sup 4}, to increase the conversion of esters, by conventional transesterification, using as feedstock a blend of oils containing 20% castor and 80% soybean. The aim of this study was to evaluate the influence of mixing ratio of oil: methanol, KOH concentration, temperature and reaction time in biodiesel production. It was found that the variation of these parameters affected the conversion of esters and quality of biodiesel produced. Conversions above 95% were obtained, and the best conversion was 99.05% at 25 deg C in a reaction time of 20 minutes using 2% KOH as a catalyst and a molar ratio methanol/oil 12:1. In order to reduce the costs of the process with respect to amount of methanol used without affecting the conversion of esters, we identified a second set of process conditions, which used the same conditions of temperature, reaction time and catalyst concentration and a different molar ratio methanol/oil (6:1) which gave a conversion of esters of 98.59%. (author)

  15. Evaluation gamma radiation in composite sisal fiber- polyurethane derived of castor oil by bending test; Avaliacao da influencia da radiacao gama em compositos de fibra de sisal - poliuretano derivado de oleo de mamona atraves de ensaios de flexao

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Felipe H. de; Geraldo, Ricardo R.; Vasco, Marina C.; Azevedo, Elaine, E-mail: helunica@yahoo.com.br [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Claro Neto, Salvador [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Instituto de Quimica

    2015-07-01

    Materials used for making furniture and accessories or positioning in X -ray examination rooms should not exhale volatile organic compounds and are resistant to ionizing radiation. One solution is the use of vegetable fiber and polyurethane composites of vegetable origin, since they are biodegradable, derived from renewable raw materials and have no volatile organic compounds. The main difficulty in developing this material is fiber adhesion with the polymer. The objective of this study is to evaluate the mechanical properties of composite sisal fiber composite, without further treatment, and polyurethane derived from castor oil, with a dose of 25 kGy gamma radiation, subjected to 3 points bending tests. (author)

  16. Studies on interfacial tension and contact angle of synthesized surfactant and polymeric from castor oil for enhanced oil recovery

    Science.gov (United States)

    Babu, Keshak; Pal, Nilanjan; Bera, Achinta; Saxena, V. K.; Mandal, Ajay

    2015-10-01

    New synthesized polymeric surfactants have immensely attracted the researchers for further development of chemical enhanced oil recovery method particularly in surfactant flooding. Contact angle and interfacial tension measurement tests are the effective ways to identify proper chemicals/surfactants for enhanced oil recovery by chemical/surfactant flooding. In the present study a new polymeric surfactant was synthesized from pre-synthesized sodium methyl ester sulfonate (surfactant) and acrylamide for application in chemical enhanced oil recovery. The synthesized surfactant and polymeric surfactant were used to measure interfacial tension between their aqueous phase and crude oil phase to investigate the efficiency of the surfactants in reduction of interfacial tension. The synthesized polymeric surfactant has also ability to control the mobility because of its viscous nature in aqueous solution. Contact angles of solid-crude oil-surfactant interface were also measured to study the effect of the synthesized surfactant and polymeric surfactant on wettability alteration mechanism. Synergistic effect was studied by using NaCl and synthesized surfactants on interfacial tension. Dynamic interfacial tensions of the surfactant and polymeric surfactant solutions with crude oil were measured at different NaCl concentrations. Interfacial tension was found to be lowered up to 10-2 to 10-3 mN/m which is effective for oil recovery. Measurement of contact angle indicates the wettability change of the quartz surface. Comparative studies on efficiencies of synthesized sodium methyl ester sulfonate surfactant and polymeric surfactant were also carried out with respect to interfacial tension reduction and contact angle change.

  17. HDO of guaiacol over NiMo catalyst supported on activated carbon derived from castor de-oiled cake

    Directory of Open Access Journals (Sweden)

    Viviana Ospina

    2015-05-01

    Full Text Available Physical and chemical activation methods were used to prepare two different activated carbons (ACs from castor de-oiled cake. H2O/CO2 mixture was used as the physical activating agent, and for chemical activation potassium carbonate (K2CO3 was used. For both materials, textural and chemical properties were characterized by N2 adsorption–desorption isotherms, thermogravimetric analysis (TGA, Fourier Transform Infrared Spectroscopy (FTIR, thermal programmed reduction (TPR, X-ray fluorescence (XRF, and scanning electron microscopy (SEM. The ACs were used as supports for NiMo sulfide catalysts, which were prepared by wetness impregnation and in-situ sulfided for the hydrodeoxygenation (HDO of guaiacol (GUA as a model compound of bio-oil. The HDO reaction was carried out in a typical batch reactor at 5 MPa of H2 and 350 °C. Under the same test conditions, commercial catalysts were also tested in the reaction. Although the commercial catalysts displayed higher GUA conversion, the prepared catalysts showed higher activity and non-oxygenated and saturated products yield.

  18. AGRIFIS - simulator prospecting scenarios and evaluation of projects for production of seeds, in nature oil and castor oil biodiesel; AGRIFIS - simulador de prospeccao de cenarios e avaliacao de projetos de producao de sementes, oleo in natura e biodiesel de mamona

    Energy Technology Data Exchange (ETDEWEB)

    Polizel, L.H.; Tahan, C.M.V.; Pelegrini, M. A.; Soares, B.F. [Universidade de Sao Paulo (ENERQ/USP), SP (Brazil). Centro de Estudos em Regulacao e Qualidade de Energia], Email: cmvtahan@pea.usp.br; Takeno, H.K. [Companhia Energetica de Petrolina (CEP), PE (Brazil); Silva, O.C. da; Monteiro, B.; Velazquez, S.M.S.G. [Universidade de Sao Paulo (CENBIO/USP), SP (Brazil). Centro Nacional de Referencia em Biomassa; Drumond, M.A.; Anjos, J.B. dos [EMBRAPA Semi-Arido - Empresa Brasileira de Pesquisa Agropecuaria (EMBRAPA), Petrolina, PE (Brazil)

    2006-07-01

    This paper presents a model conceived for scenario prospection and project evaluation of small scale castor bean farming, oil extraction and bio diesel production (transesterification) integrated chain. To evaluate the performance of each project the model adopts financial, social and environmental index such as NPV, IRR, SPB, DPB, production costs, family income, number of settled families and employment. The model was implemented in a computational environment, allowing its use as a decision support tool for investments on the castor bean production chain; it calculates the cash flow of the entire project and of each family, including earnings, debts, taxes, interest and amortization. (author)

  19. Analysis of the gamma radiation effects in the composite of polyurethane derived from castor oil and natural fibers; Analise dos efeitos da radiacao gama no composito de poliuretano derivado de mamona com serragem

    Energy Technology Data Exchange (ETDEWEB)

    Kienen, Victor D.; Todt, Matheus L.; Capellari, Giovanni S.; Azevedo, Elaine C. [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Neto, Salvador C. [Universidade de Sao Paulo (IQSC/USP), Sao Carlos, SP (Brazil)

    2015-07-01

    Composite of Polyurethane derived from castor oil and natural fibers are obtained from renewable raw material, low cost, and for not assaulting nature. This paper analyzes the effects of gamma radiation on composite polyurethane derived from castor with sawdust irradiated with gamma radiation of 25 kGy . It was held from 3 tips bending tests and micrograph by scanning electron microscopy. The results indicate that gamma radiation decreases the breakdown voltage and the micrograph of the fracture indicates brittle fracture occurred. (author)

  20. Numerical and experimental study of the slug-flow regime in a mixture of castor and paraffin oils in a T-type microchannel

    Science.gov (United States)

    Minakov, A. V.; Shebeleva, A. A.; Yagodnitsyna, A. A.; Kovalev, A. V.; Bilsky, A. V.

    2017-09-01

    The slow-flug regime in a mixture of castor and paraffin oils in a T-type microchannel with crosssectional dimensions of 200 × 400 μm has been studied by numerical and experimental methods. The domain of existence of the slow-flug regime in this system has been determined. Dependence of the paraffin-oil slug length on the ratio of flow rates of the mixture components is established. Comparison of the calculated and experimental data shows their good agreement.

  1. BONE REGENERATION AFTER DEMINERALIZED BONE MATRIX AND CASTOR OIL (RICINUS COMMUNIS) POLYURETHANE IMPLANTATION

    Science.gov (United States)

    Leite, Fábio Renato Manzolli; Ramalho, Lizeti Toledo de Oliveira

    2008-01-01

    Innocuous biocompatible materials have been searched to repair or reconstruct bone defects. Their goal is to restore the function of live or dead tissues. This study compared connective tissue and bone reaction when exposed to demineralized bovine bone matrix and a polyurethane resin derived from castor bean (Ricinus communis). Forty-five rats were assigned to 3 groups of 15 animals (control, bovine bone and polyurethane). A cylindrical defect was created on mandible base and filled with bovine bone matrix and the polyurethane. Control group received no treatment. Analyses were performed after 15, 45 and 60 days (5 animals each). Histological analysis revealed connective tissue tolerance to bovine bone with local inflammatory response similar to that of the control group. After 15 days, all groups demonstrated similar outcomes, with mild inflammatory reaction, probably due to the surgical procedure rather than to the material. In the polymer group, after 60 days, scarce multinucleated cells could still be observed. In general, all groups showed good stability and osteogenic connective tissue with blood vessels into the surgical area. The results suggest biocompatibility of both materials, seen by their integration into rat mandible. Moreover, the polyurethane seems to be an alternative in bone reconstruction and it is an inexhaustible source of biomaterial. PMID:19089203

  2. Studies on performance evaluation of a green plasticizer made by enzymatic esterification of furfuryl alcohol and castor oil fatty acid.

    Science.gov (United States)

    Mukherjee, Sohini; Ghosh, Mahua

    2017-02-10

    The esterification of furfuryl alcohol (FA) and castor oil fatty acid (COFA) at 3:1 molar ratio, by immobilized Candida antarctica Lipase B (NS 435 from Novozyme) in a solvent free system gave a maximum yield of 88.64% (%w/w) at 5h. Performance of the FA-COFA ester plasticized Ethyl Cellulose (EC) films were evaluated by surface morphologies, XRD analysis, mechanical properties,thermal properties, water vapor permeability and migration stability test. It was an effective plasticizer with better mechanical properties and thermal stability at the increasing concentration of FA-COFA ester (15-25%) containing EC film, than the traditional plasticizer, i.e; dibutyl phthalate (DBP) in producing good quality films. Chemical structure and the intermolecular interactions between FA-COFA ester and ethyl cellulose chains were the causative agents of these outstanding performances. Therefore, this FA-COFA ester, with significant plasticizing property, at a certain concentration, can be a substitute of DBP. Copyright © 2016 Elsevier Ltd. All rights reserved.

  3. Synthesis and characterization of gold nanotube/nanowire-polyurethane composite based on castor oil and polyethylene glycol.

    Science.gov (United States)

    Ganji, Yasaman; Kasra, Mehran; Salahshour Kordestani, Soheila; Bagheri Hariri, Mohiedin

    2014-09-01

    Gold nanotubes/nanowires (GNT/NW) were synthesized by using the template-assisted electrodeposition technique and mixed with castor oil-polyethylene glycol based polyurethane (PU) to fabricate porous composite scaffolds for biomedical application. 100 and 50 ppm of GNT/NW were used to synthesize composites. The composite scaffolds were characterized by Fourier transform infrared spectroscopy, dynamic mechanical thermal analysis, differential scanning calorimetry, and scanning electron microscopy. Cell attachment on polyurethane-GNT/NW composites was investigated using fat-derived mesenchymal stem cells. Addition of 50 or 100 ppm GNT/NW had significant effects on thermal, mechanical, and cell attachment of polyurethane. Higher crosslink density and better cell attachment and proliferation were observed in polyurethane containing 50 ppm GNT/NW. The results revealed that GNT/NW formed hydrogen bonding with the polyurethane matrix and improved the thermomechanical properties of nanocomposites. Compared with pure PU, better cellular attachment on polyurethane-GNT/NW composites was observed resulting from the improved surface properties of composites. Copyright © 2014 Elsevier B.V. All rights reserved.

  4. Wound Healing Bionanocomposites Based on Castor Oil Polymeric Films Reinforced with Chitosan-Modified ZnO Nanoparticles.

    Science.gov (United States)

    Díez-Pascual, Ana M; Díez-Vicente, Angel L

    2015-09-14

    Castor oil (CO), which is a readily available, relatively inexpensive, and environmentally benign nonedible oil, has been successfully used as matrix material to prepare biocompatible and biodegradable nanocomposite films filled with chitosan (CS)-modified ZnO nanoparticles. The biocomposites were synthesized via a simple and versatile solution mixing and casting method. The morphology, structure, thermal stability, water absorption, biodegradability, cytocompatibility, barrier, mechanical, viscoelastic, antibacterial, and wound healing properties of the films have been analyzed. FT-IR spectra were used to obtain information about the nanoparticle-matrix interactions. The thermal stability, hydrophilicity, degree of porosity, water absorption, water vapor transmission rate (WVTR), oxygen permeability (Dk), and biodegradability of the films increased with the CS-ZnO loading. The WVTR and Dk data obtained are within the range of values reported for commercial wound dressings. Tensile tests demonstrated that the nanocomposites displayed a good balance between elasticity, strength, and flexibility under both dry and simulated body fluid (SBF) environments. The flexibility increased in a moist atmosphere due to the plasticization effect of absorbed water. The nanocomposites also exhibited significantly enhanced dynamic mechanical performance (storage modulus and glass transition temperature) than neat CO under different humidity conditions. The antibacterial activity of the films against Escherichia coli, Staphylococcus aureus, and Micrococcus luteus bacteria was investigated in the presence and the absence of UV light. The biocide effect increased progressively with the CS-ZnO content and was systematically stronger against Gram-positive cells. Composites with nanoparticle loading ≤5.0 wt % exhibited very good in vitro cytocompatibility and enabled a faster wound healing than neat CO and control gauze, hence showing great potential to be applied as antibacterial

  5. Electroactive polyurethane/siloxane derived from castor oil as a versatile cardiac patch, part I: Synthesis, characterization, and myoblast proliferation and differentiation.

    Science.gov (United States)

    Baheiraei, Nafiseh; Gharibi, Reza; Yeganeh, Hamid; Miragoli, Michele; Salvarani, Nicolò; Di Pasquale, Elisa; Condorelli, Gianluigi

    2016-03-01

    Tissue-engineered cardiac patch aims at regenerating an infarcted heart by improving cardiac function and providing mechanical support to the diseased myocardium. In order to take advantages of electroactivity, a new synthetic method was developed for the introduction of an electroactive oligoaniline into the backbone of prepared patches. For this purpose, a series of electroactive polyurethane/siloxane films containing aniline tetramer (AT) was prepared through sol-gel reaction of trimethoxysilane functional intermediate polyurethane prepolymers made from castor oil and poly(ethylene glycol). Physicochemical, mechanical, and electrical conductivity of samples were evaluated and the recorded results were correlated to their structural characteristics. The optimized films were proved to be biodegradable and have tensile properties suitable for cardiac patch application. The embedded AT moieties in the backbone of the prepared samples preserved their electroactivity with the electrical conductivity in the range of 10 -4 S/cm. The prepared films were compatible with proliferation of C2C12 and had potential for enhancing myotube formation even without external electrical stimulation. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 775-787, 2016. © 2015 Wiley Periodicals, Inc.

  6. Biologia comparada de Spodoptera cosmioides (Walk. (Lepidoptera: Noctuidae em cebola, mamona, soja e feijão Compared biology of Spodoptera cosmioides (Walk. (Lepidoptera: Noctuidae in onion, castor oil plant, soybean and bean

    Directory of Open Access Journals (Sweden)

    Alvimar Bavaresco

    2003-12-01

    castor oil plant and onion shorter duration and larger viability of total cycle (39.7 days and 21.7%; 40.5 days and 21.8%, respectively, in contrast of soy (46.0 days and 3.9%. The pupal weight was 444.6 mg on onion, 420.0mg on bean, 396.6mg on castor oil plant and 298.7 mg on soy. Onion and castor oil plant leaves had a predominance of six larval instars, also happening seven for some of them, while in soy the occurrence of seven prevailed, also happening eight instars, indicating less nutritional adaptation of this host. The females had pupal phase significantly smaller than the males in all the hosts, making adults emergency happen before the males. In onion, the longevity of the adults was significantly superior comparing with the other hosts. The fecundity was better on onion and castor oil plant (3224 and 3206 eggs/female, respectively, therefore on soy was observed 1353 eggs/female. In bean leaves, the development of the insect was harmed by morphologic characters, which promoted high mortality in the larval phase.

  7. Preparation, characterization, and pharmacokinetics of tilmicosin- and florfenicol-loaded hydrogenated castor oil-solid lipid nanoparticles.

    Science.gov (United States)

    Ling, Z; Yonghong, L; Changqing, S; Junfeng, L; Li, Z; Chunyu, J; Xianqiang, L

    2017-06-01

    To effectively control bovine mastitis, tilmicosin (TIL)- and florfenicol (FF)-loaded solid lipid nanoparticles (SLN) with hydrogenated castor oil (HCO) were prepared by a hot homogenization and ultrasonication method. In vitro antibacterial activity, properties, and pharmacokinetics of the TIL-FF-SLN were studied. The results demonstrated that TIL and FF had a synergistic or additive antibacterial activity against Streptococcus dysgalactiae, Streptococcus uberis, and Streptococcus agalactiae. The size, polydispersity index, and zeta potential of nanoparticles were 289.1 ± 13.7 nm, 0.31 ± 0.05, and -26.7 ± 1.3 mV, respectively. The encapsulation efficiencies for TIL and FF were 62.3 ± 5.9% and 85.1 ± 5.2%, and the loading capacities for TIL and FF were 8.2 ± 0.6% and 3.3 ± 0.2%, respectively. The TIL-FF-SLN showed no irritation in the injection site and sustained release in vitro. After medication, TIL and FF could maintain about 0.1 μg/mL for 122 and 6 h. Compared to the control solution, the SLN increased the area under the concentration-time curve (AUC 0-t ), elimination half-life (T ½ke ), and mean residence time (MRT) of TIL by 33.09-, 23.29-, and 37.53-fold, and 1.69-, 5.00-, and 3.83-fold for FF, respectively. These results of this exploratory study suggest that the HCO-SLN could be a useful system for the delivery of TIL and FF for bovine mastitis therapy. © 2016 John Wiley & Sons Ltd.

  8. Polyoxyethylene hydrogenated castor oil modulates benzalkonium chloride toxicity: comparison of acute corneal barrier dysfunction induced by travoprost Z and travoprost.

    Science.gov (United States)

    Uematsu, Masafumi; Kumagami, Takeshi; Shimoda, Kenichiro; Kusano, Mao; Teshima, Mugen; To, Hideto; Kitahara, Takashi; Kitaoka, Takashi; Sasaki, Hitoshi

    2011-10-01

    To determine the element that modulates benzalkonium chloride (BAC) toxicity by using a new electrophysiological method to evaluate acute corneal barrier dysfunction induced by travoprost Z with sofZia (Travatan Z(®)), travoprost with 0.015% BAC (Travatan(®)), and its additives. Corneal transepithelial electrical resistance (TER) was measured in live white Japanese rabbits by 2 Ag/AgCl electrodes placed in the anterior aqueous chamber and on the cornea. We evaluated corneal TER changes after a 60-s exposure to travoprost Z, travoprost, and 0.015% BAC. Similarly, TER changes were evaluated after corneas were exposed for 60 s to the travoprost additives ethylenediaminetetraacetic acid disodium salt, boric acid, mannitol, trometamol, and polyoxyethylene hydrogenated castor oil 40 (HCO-40) with or without BAC. Corneal damage was examined after exposure to BAC with or without travoprost additives using scanning electron microscopy (SEM) and a cytotoxicity assay. Although no decreases of TER were noted after exposure to travoprost Z with sofZia and travoprost with 0.015% BAC, a significant decrease of corneal TER was observed after 0.015% BAC exposure. With the exception of BAC, no corneal TER decreases were observed for any travoprost additives. After corneal exposure to travoprost additives with BAC, HCO-40 was able to prevent the BAC-induced TER decrease. SEM observations and the cytotoxicity assay confirmed that there was a remarkable improvement of BAC-induced corneal epithelial toxicity after addition of HCO-40 to the BAC. Travoprost Z with sofZia and travoprost with BAC do not induce acute corneal barrier dysfunction. HCO-40 provides protection against BAC-induced corneal toxicity.

  9. Experimental evaluation of the performance and emissions of diesel engines using blends of crude castor oil and diesel; Avaliacao experimental do desempenho e emissoes de motores diesel usando misturas de oleo de mamona e oleo diesel

    Energy Technology Data Exchange (ETDEWEB)

    Pimentel, Valeria Said de Barros; Pereira, Pedro Paulo [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Dept. de Engenharia Mecanica; Belchior, Carlos Rodrigues Pereira [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Dept. de Engenharia Oceanica

    2004-07-01

    This work refers to the experimental evaluation of diesel generators operating with blend of crude castor oil and diesel. Performance and emissions tests were accomplished in a diesel engine of direct injection. Because of the high viscosity of the blend a device was installed on the engine in order to lower the blend viscosity. A comprehensive analysis of the results obtained in these tests indicates the possibility of use of the blend of castor oil and diesel as fuel for diesel-generators, with modifications introduced in the engines. (author)

  10. The Effect of Drought Stress on Grain Yield and Oil Rate and Protein Percentage of Four Varieties Castor in Climatic Conditions of Damghan

    Directory of Open Access Journals (Sweden)

    Gh. Laei

    2012-08-01

    Full Text Available In this study theeffect ofdrought stress was investigated on grain yield and oil rate and protein percentage of four varieties of castor in the climatic conditions of Damghan. The experiment was done in the research farm of Damghan Islamic Azad University(Iranin 2011 assplit plots in a randomized complete block design with three replications. The main plots of drought stress were 5, 10 and15 days and another factor included four varities of castor ( one-flower, two- flower, local and red-flower which were performed in stable density of fivebushes per cultured square meter. Therefore, after gremination, the amount of irrigation water was recorded using volumetric meters. The traits evaluated included oil rate,seed protein percentage, andgrainyield. The results show that two-flower variety with 1241 kg per hectare on 5-day drought stress has the most grain yield. Most oil rate was observed in two-flower variety on 5 day drought stress with 496.4 kg/ha.

  11. Simulation of the evaporation of drops from palm and castor oil biodiesels based on physical properties

    OpenAIRE

    Botero, Maria Luisa; Molina, Alejandro

    2010-01-01

    A reduction of oil reserves and an augmented production of greenhouse gases from fossil fuels have increased the use of biodiesel in internal combustion engines. Although physical and chemical properties of biodiesel and diesel are similar enough that allow the use of pure biodiesel in a traditional engine without considerable adjustments, differences in chemical structure of diesel and biodiesel change vaporization and combustion rates and can affect engine performance. In this study a model...

  12. Proposition to use 'in natura' vegetable oil and biodiesel from castor oil in thermal power plants; Proposicao de uso de oleo vegetal in natura e biodiesel de mamona em termeletricas

    Energy Technology Data Exchange (ETDEWEB)

    Soares, B.F.; Tahan, C.M.V.; Pelegrini, M.A.; Polizel, L.H. [Universidade de Sao Paulo (ENERQ/USP), SP (Brazil). Centro de Estudo em Regulacao e Qualidade de Energia; Vandelli, M.V.M. [Termocabo Ltda., Recife, PE (Brazil); Takeno, H.K. [Companhia Energetica de Petrolina (CEP), PE (Brazil)

    2006-07-01

    This paper proposes the adoption of renewable fuels on thermal power plants using diesel or high sulfur fuel oil generator sets. The renewable fuels proposed to partially or fully replace the fossil fuels are castor oil in natura or transesterified (biodiesel). Physical and chemical analyses were carried out on laboratory, establishing the energetic performance of each sample. The results showed that mixtures of bio diesel-fossil fuel offers similar performance when compared to the conventional fuels, allowing its use on thermal power plants in a satisfactory basis. (author)

  13. Development and viability of a translocated beaver Castor fiber population in the Netherlands

    NARCIS (Netherlands)

    Nolet, B.A.; Baveco, J.M.

    1996-01-01

    We monitored survival, reproduction and emigration of a translocated beaver Castor fiber population in the Netherlands for five years and used a stochastic model to assess its viability. Between 1988 and 1991, 42 beavers were released in the Biesbosch National Park. The mortality was initially high

  14. Weed management strategies for castor bean crops

    Directory of Open Access Journals (Sweden)

    Augusto Guerreiro Fontoura Costa

    2014-04-01

    Full Text Available Castor bean crops are agriculturally relevant due to the quality and versatility of their oil, both for the chemical industry and for biodiesel production. Proper weed management is important for both the cultivation and the yield of castor bean crops; therefore, the intention of the present work is to review pertinent information regarding weed management, including the studies regarding weed interference periods, chemical controls for use in different crop production systems and herbicide selectivity, for castor bean crops. Weed science research for castor bean crops is scarce. One of the main weed management challenges for castor bean crops is the absence of herbicides registered with the Ministry of Agriculture, Livestock and Food Supply (MALFS. Research for viable herbicides for weed control in castor bean crops should be directed by research and/or rural extension institutions, associations and farmers cooperatives, as well as by manufactures, for the registration of these selective herbicides, which would be primarily used to control eudicotyledons in castor bean crops. New studies involving the integration of weed control methods in castor bean also may increase the efficiency of weed management, for both small farmers using traditional crop methods in the Brazilian Northeast region, as well as for areas with the potential for large scale production, using conservation tillage systems, such as the no-tillage crop production system.

  15. Interpenetrating polymer networks based on polyol modified castor ...

    Indian Academy of Sciences (India)

    Unknown

    glycerol modification of castor oil results in more crosslinked and stiffer IPNs possessing better mechanical properties over that of unmodified castor oil polyurethane/. PHEMA IPNs. 3.5 Chemical resistance. The percentage weight loss of IPNs were determined in. H2SO4, CH3COOH, HCl, HNO3, NaCl and NaOH etc and.

  16. Discovery and Characterization of Novel Signatures from the Ricinus communis L. (Castor Bean) Genome

    National Research Council Canada - National Science Library

    O'Connell, Kevin P; Skowronski, Evan W; Dretchen, Kenneth L; Leshin, Jonathan A; Weeks, Andrea

    2006-01-01

    Given the infamous toxicity of ricin and the industrial usefulness of castor oil, there is a surprising lack of information about the genetic diversity of the species that produces both, the castor bean plant (Ricinus communis L...

  17. Food grade microemulsion systems: Sunflower oil/castor oil derivative-ethanol/water. Rheological and physicochemical analysis.

    Science.gov (United States)

    Mori Cortés, Noelia; Lorenzo, Gabriel; Califano, Alicia N

    2018-05-01

    Microemulsions are thermodynamically stable systems that have attracted considerable attention in the food industry as delivery systems for many hydrophobic nutrients. These spontaneous systems are highly dependent on ingredients and composition. In this work phase diagrams were constructed using two surfactants (Kolliphor RH40 and ELP), water, sunflower oil, and ethanol as cosurfactant, evaluating their physicochemical properties. Stability of the systems was studied at 25 and 60 °C, monitoring turbidity at 550 nm for over a month to identify the microemulsion region. Conductivity was measured to classify between water-in-oil and oil-in-water microemulsions. The phase diagram constructed with Kolliphor RH40 exhibited a larger microemulsion area than that formulated with Kolliphor ELP. All formulations showed a monomodal droplet size distribution with low polydispersity index (<0.30) and a mean droplet size below 20 nm. Systems with higher water content presented a Newtonian behavior; increasing the dispersed phase content produced a weak gel-like structure with pseudoplastic behavior under flow conditions that was satisfactorily modeled to obtain structural parameters. Copyright © 2018 Elsevier Ltd. All rights reserved.

  18. Síntesis y caracterización de adhesivos reposicionables de poliuretano dispersos en agua, obtenidos a partir de aceite de castor maleinizado Synthesis and characterization of pressure-sensitive adhesives of waterborne polyurethane from maleinizated castor oil

    Directory of Open Access Journals (Sweden)

    Paula Mazo

    2010-06-01

    Full Text Available El presente trabajo se centró en la producción de dispersiones acuosas de poliuretano empleando el método de emulsificación por inversión de fases. Para la síntesis fueron empleados dos polioles: uno comercial tipo poliéster y el otro es aceite de castor maleinizado (MACO; dos diisocianatos, uno aromático Toluen diisocianato (TDI y otro alifático Hexametilen diisocianato (HDI, siendo poco comunes para esta aplicación. Como emulsificante interno se empleó ácido cítrico el cual es muy económico y de fácil adquisición. Como factores se evaluaron la cantidad de ácido cítrico y la relación molar de grupos isocianato a hidroxilos (NCO/OH, generando un diseño de experimentos factorial 3² y minimizando el contenido de sólidos sedimentados. Mediante la metodología de superficie de respuesta, se obtuvo una ecuación polinomial cuadrática por un análisis de regresión múltiple. Los poliuretanos formados fueron evaluados en cuanto a sus propiedades adhesivas y mecánicas (pegajosidad tack, pegajosidad en cinta loop tack, cohesión hold, pelado peel, lo que permitió clasificar el adhesivo como reposicionable, para emplearlo en etiquetas.This work focused on the production of aqueous dispersions of polyurethane using the emulsification method by phase inversion. For the synthesis two polyols were employed, viz. a commercial polyester and Maleinizated Castor Oil (MACO, with two diisocyanates: one aromatic, toluene diisocyanate (TDI and another aliphatic, hexamethylene diisocyanate (HDI, which are not common for this application. Citric acid was used as internal emulsifier which is inexpensive and readily available. The parameters were the amount of citric acid and the mole ratio of isocyanate groups to hydroxyl (NCO/OH, generating a 3² factorial design, with minimization of the sedimented solids. The surface methodology was used to obtain a quadratic polynomial equation by multiple regression analysis. Polyurethanes synthesized were

  19. Induced mutations in castor

    International Nuclear Information System (INIS)

    Ganesan, K.; Javad Hussain, H.S.; Vindhiyavarman, P.

    2001-01-01

    Castor (Ricinus communis L.) is an important oilseed crop in India. To create variability mutations were induced in two cultivars 'TMV5' (maturing in 130-140 days) and 'CO1' (perennial type). Gamma rays and diethyl sulphate and ethidium bromide were used for seed treatment. Ten doses, from 100 to 1000 Gy were employed. For chemical mutagenesis five concentrations of mutagenes from 10 to 50 mM were tried. No economic mutants could be isolated after treatment with the chemical mutagens. The following economic mutants were identified in the dose 300 Gy of gamma rays. Annual types from perennial CO 1 castor CO 1 is a perennial variety (8-10 years) with bold seeds (100 seed weight 90 g) and high oil content (57%). Twenty-one lines were isolated with annual types (160-180 days) with high yield potential as well as bold seeds and high oil content. These mutants, identified in M 3 generation were bred true in subsequent generations up to M 8 generation. Critical evaluation of the mutants in yield evaluation trials is in progress

  20. Quantitative proteomics of seed filling in castor: comparison with soybean and rapeseed reveals differences between photosynthetic and nonphotosynthetic seed metabolism.

    Science.gov (United States)

    Houston, Norma L; Hajduch, Martin; Thelen, Jay J

    2009-10-01

    Seed maturation or seed filling is a phase of development that plays a major role in the storage reserve composition of a seed. In many plant seeds photosynthesis plays a major role in this process, although oilseeds, such as castor (Ricinus communis), are capable of accumulating oil without the benefit of photophosphorylation to augment energy demands. To characterize seed filling in castor, a systematic quantitative proteomics study was performed. Two-dimensional gel electrophoresis was used to resolve and quantify Cy-dye-labeled proteins expressed at 2, 3, 4, 5, and 6 weeks after flowering in biological triplicate. Expression profiles for 660 protein spot groups were established, and of these, 522 proteins were confidently identified by liquid chromatography-tandem mass spectrometry by mining against the castor genome. Identified proteins were classified according to function, and the most abundant groups of proteins were involved in protein destination and storage (34%), energy (19%), and metabolism (15%). Carbon assimilatory pathways in castor were compared with previous studies of photosynthetic oilseeds, soybean (Glycine max) and rapeseed (Brassica napus). These comparisons revealed differences in abundance and number of protein isoforms at numerous steps in glycolysis. One such difference was the number of enolase isoforms and their sum abundance; castor had approximately six times as many isoforms as soy and rapeseed. Furthermore, Rubisco was 11-fold less prominent in castor compared to rapeseed. These and other differences suggest some aspects of carbon flow, carbon recapture, as well as ATP and NADPH production in castor differs from photosynthetic oilseeds.

  1. Study of castor oil polyurethane - poly(methyl methacrylate semi-interpenetrating polymer network (SIPN reaction parameters using a 2³ factorial experimental design

    Directory of Open Access Journals (Sweden)

    Fernanda Oliveira Vieira da Cunha

    2004-12-01

    Full Text Available In this work was employed a 2³ factorial experiment design to evaluate the castor oil polyurethane-poly(methyl methacrylate semi-IPN synthesis. The reaction parameters used as independent variables were NCO/OH molar ratio, polyurethane polymerization time and methyl methacrylate (MMA content. The semi-IPNs were cured over 28 h using two thermal treatments. The polymers were characterized by infrared and Raman spectroscopy, thermal analysis and swelling profiles in n-hexane. The glass transition temperature (Tg and the swelling were more affect by the NCO/OH molar ratio variation. The semi-IPNs showed Tg from - 27 to - 6 °C and the swelling range was from 3 to 22%, according to the crosslink density. The IPN mechanical properties were dependent on the cure temperature and MMA content in it. Lower elastic modulus values were observed in IPNs cured at room temperature.

  2. Oil and development

    Energy Technology Data Exchange (ETDEWEB)

    Ellis, F

    1974-10-01

    The shift in world income due to the increase in oil prices has resulted in a world economy that has been thrown off balance. Nine papers are presented that explore the background and the main implications of this ''watershed'' in international relations, particularly the extent to which it will affect the development prospects of poor countries and the climate of trade between poor and rich nations in the next few years. Two papers, ''Diary of Events in the Oil Market 1971--1974'' and ''Statistical Background,'' provide information on the financial changes implied by the price increase; some of the figures should be treated as preliminary estimates only. ''Large International Firms in the Oil Industry'' examines the part played by the major oil companies in developments in the oil market leading up to the events of 1973. Two papers, ''Can OPEC Maintain Current Prices'' and ''OPEC As a Model for Other Mineral Exporters,'' present optimistic conclusions, from the viewpoint of developing countries, on their future capability for controlling their own destinies in trade. ''A Note on Some Issues Raised for Science and Technology Policy by the Increase in Oil Prices'' looks at options open to producers and consumers of raw materials. ''Assessing the Economic Impact on Developing Countries and Some Policy Suggestions,'' ''A Note on the Implications of the Oil Price Increases for British Aid Policy,'' and ''Confrontation Versus Co-operation'' are three papers concerned with difficulties of developing countries and particularly India, Bangladesh, and Sri Lanka. (MCW)

  3. Allelopathic effect of aqueous extract of fresh leaf castor beans ...

    African Journals Online (AJOL)

    Allelopathy defines the production of specific biomolecules (allelochemical) by a plant that can induce positive or negative impacts on another culture. The crop of castor beans (Ricinus communis L.) is being economically valued and receiving attention, mainly by the biodiesel production, castor oil and animal feeding.

  4. Sintesis de poliuretanos a partir de polioles obtenidos a partir del aceite de higuerilla modificado por transesterificación con pentaeritritol Polyurethanes sintetized of polyols obtained from castor oil modified by transesterification with pentaerythritol

    Directory of Open Access Journals (Sweden)

    Manuel F. Valero

    2008-01-01

    Full Text Available Castor oil was reacted by transesterification with various percentages in mass of pentaerythritol to obtain different esters of pentaerythritol. Alternatively, glycerol was also used instead of pentaerythritol for the same reaction in order to establish comparative reference products. The products of the reactions were characterized by matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy in order to detect and quantify (in terms of the molecular mass and structural information the components of the products obtained. Analysis for hydroxyl value, acid value, viscosity and specific gravity were used to complete the characterization of the polyols obtained and also of the original castor oil. The polymer characterization was accomplished by tensile stress-strain tests, Shore A hardness, thermogravimetric analysis and chemical resistance to solvents.

  5. Low density polyethylene (LDPE) / poli (3-hydroxy-butyrate) (PHB) blends filled with castor oil cake; Misturas de polietileno de baixa densidade (PEBD) e poli(3-hidroxibutirato) (PHB) carregados com torta de mamona (TM)

    Energy Technology Data Exchange (ETDEWEB)

    Rocha, M.C.G.; Oliveira, C.I.R. de; Sanches, M.C.; Coelho, N.N., E-mail: mrocha@iprj.uerj.br [Universidade do Estado do Rio de Janeiro (IP/UERJ), Rio de Janeiro, RJ (Brazil). Instituto Politecnico

    2014-07-01

    Blends of PHB and LDPE were prepared by melt mixing in a Haake internal mixer. Castor oil pressed cake was used as filler for the blends. In order to improve the interfacial adhesion between the filler and the polymers, a mercerization process with 5% NaOH solution was employed. This process was evaluated by several techniques such as: X-Ray diffraction, infrared spectroscopy and scanning electron microscopy (SEM). The mechanical properties were evaluated by traditional tensile stress-strain tests (ASTM D- 638). The obtained results showed that the mercerization process leads to better adhesion properties. The Young Modulus of the blends presented a tendency to increase with the addition of the castor oil cake.(author)

  6. Estratégias de irrigação com água salina na mamoneira Irrigation strategies with saline water in castor oil plant

    Directory of Open Access Journals (Sweden)

    Maria Eugênia da Costa

    2013-03-01

    Full Text Available Este experimento foi realizado em campo para avaliar estratégias de irrigação com água salina no crescimento e na produção da mamoneira (BRS Energia, além de identificar eventuais estádios de maior tolerância à salinidade e monitorar alguns atributos químicos do solo. Os tratamentos consistiram da irrigação com águas de CE 0,53; 2,09; 3,66 dS m-1 de acordo com a fase de desenvolvimento da cultura, totalizando cinco estratégias de irrigação com água salina e uma testemunha. As avaliações de crescimento foram realizadas aos 20; 40; 60; 80; 100 dias após a semeadura (DAS. As coletas de solo foram realizadas concomitantemente às avaliações de crescimento, nas camadas 0-0,10; 0,10-0,30; 0,30-0,50 m. A irrigação contínua com água de CE 3,66 dS m-1 reduziu a altura de planta, o comprimento de racemo terciário, o número de frutos por área útil e a produtividade de frutos. Essa estratégia aumentou acentuadamente os teores de Na+ e a CE do solo no final do ciclo. Por outro lado, a irrigação com água salina começando aos 45 DAS não prejudicou as variáveis de crescimento e os componentes de produção. Essa estratégia minimizou os impactos negativos sobre a salinidade/sodicidade do solo no final do ciclo. Comportamento similar foi observado para a irrigação contínua com água de CE 2,09 dS m-1 (mistura de águas com CE de 0,53 e 3,66 dS m-1. A mamoneira não apresentou tolerância diferenciada à salinidade em função da fase de desenvolvimento, embora tenha sido prejudicada quando aumentaram a intensidade e a duração do estresse salino.This experiment was conducted under field conditions to evaluate irrigation strategies with saline water on growth and production of castor oil plant (cv. BRS Energia, identify eventual stages with higher tolerance to salinity and monitor some soil chemical attributes. The treatments consisted of irrigations with water of EC 0.53; 2.09; 3.66 dS m-1 according to the development

  7. Bioequivalence of Liposome-Entrapped Paclitaxel Easy-To-Use (LEP-ETU) formulation and paclitaxel in polyethoxylated castor oil: a randomized, two-period crossover study in patients with advanced cancer.

    Science.gov (United States)

    Slingerland, Marije; Guchelaar, Henk-Jan; Rosing, Hilde; Scheulen, Max E; van Warmerdam, Laurence J C; Beijnen, Jos H; Gelderblom, Hans

    2013-12-01

    Preclinical studies comparing paclitaxel formulated with polyethoxylated castor oil with the sonicated formulation of liposome-entrapped paclitaxel (LEP) have demonstrated that LEP was associated with reduced toxicity while maintaining similar efficacy. Preliminary studies on the pharmacokinetics in patients support earlier preclinical data, which suggested that the LEP Easy-to-Use (LEP-ETU) formulation and paclitaxel formulated with castor oil may have comparable pharmacokinetic properties. Our objectives were: (1) to determine bioequivalence of paclitaxel pharmaceutically formulated as LEP-ETU (test) and paclitaxel formulated with castor oil (reference); and (2) to assess the tolerability of LEP-ETU following intravenous administration. Patients with advanced cancer were studied in a randomized, 2-period crossover bioequivalence study. Patients received paclitaxel 175 mg/m(2) administered as an intravenous infusion over 180 minutes, either as a single-treatment cycle of the test formulation followed by a single-treatment cycle of the reference formulation, or vice versa. Thirty-two of 58 patients were evaluable and were included in the analysis for bioequivalence. Mean total paclitaxel Cmax values for the test and reference formulations were 4955.0 and 5108.8 ng/mL, respectively. Corresponding AUC0-∞ values were 15,853.8 and 18,550.8 ng·h/mL, respectively. Treatment ratios of the geometric means were 97% (90% CI, 91%-103%) for Cmax and 84% (90% CI, 80%-90%) for AUC0-∞. These results met the required 80% to 125% bioequivalence criteria. The most frequently reported adverse events after LEP-ETU administration were fatigue, alopecia, and myalgia. At the studied dose regimen, LEP-ETU showed bioequivalence with paclitaxel formulated with polyethoxylated castor oil. © 2013 Elsevier HS Journals, Inc. All rights reserved.

  8. The CASTOR shower library

    International Nuclear Information System (INIS)

    Mundim Filho, Luiz Martins; Carvalho, Wagner de Paula

    2012-01-01

    Full text: CASTOR (Centaur And Strange Object Research) is an electromagnetic (EM) and hadronic (HAD) calorimeter, based on tungsten and quartz plates, operating in the CMS Detector (Compact Muon Solenoid) at LHC. The calorimeter detects Cerenkov radiation and is positioned around the beam pipe in the very forward region of CMS (at 14.38 m from the interaction point), covering the pseudo-rapidity range between -6.6 ≤ η≤-5.1 . It is longitudinally segmented into 14 sections, 2 for the EM and 12 for the HAD parts and is 16-fold azimuthally symmetric around the beam pipe. A Shower Library is needed for CASTOR Monte Carlo simulation, as the full simulation of showers takes a long time and the high multiplicity of particles in the forward region makes this simulation very time consuming. The Shower Library is used as a look-up table in the form of a ROOT file, so that when a simulated particle enters the detector with a certain energy and direction, characterized by the azimuthal angle φ and the pseudo-rapidity η, instead of making the full simulation of the shower in CASTOR, it is substituted by one already stored in the Shower Library. Showers corresponding to two types of particles are included in the Shower Library: electrons (or photons) and charged pions. The software implemented to make the Shower Library is described, as well as the validation of this library and timing studies. This package has been developed in the context of the official software of the CMS Collaboration, CMSSW. (author)

  9. Shock Hugoniot and equations of states of water, castor oil, and aqueous solutions of sodium chloride, sucrose and gelatin

    Science.gov (United States)

    Gojani, A. B.; Ohtani, K.; Takayama, K.; Hosseini, S. H. R.

    2016-01-01

    This paper reports a result of experiments for the determination of reliable shock Hugoniot curves of liquids, in particular, at relatively low pressure region, which are needed to perform precise numerical simulations of shock wave/tissue interaction prior to the development of shock wave related therapeutic devices. Underwater shock waves were generated by explosions of laser ignited 10 mg silver azide pellets, which were temporally and spatially well controlled. Measuring temporal variation of shock velocities and over-pressures in caster oil, aqueous solutions of sodium chloride, sucrose and gelatin with various concentrations, we succeeded to determine shock Hugoniot curves of these liquids and hence parameters describing Tait type equations of state.

  10. Synthesis and characterization of gold nanotube/nanowire–polyurethane composite based on castor oil and polyethylene glycol

    International Nuclear Information System (INIS)

    Ganji, Yasaman; Kasra, Mehran; Salahshour Kordestani, Soheila; Bagheri Hariri, Mohiedin

    2014-01-01

    Gold nanotubes/nanowires (GNT/NW) were synthesized by using the template-assisted electrodeposition technique and mixed with castor oil–polyethylene glycol based polyurethane (PU) to fabricate porous composite scaffolds for biomedical application. 100 and 50 ppm of GNT/NW were used to synthesize composites. The composite scaffolds were characterized by Fourier transform infrared spectroscopy, dynamic mechanical thermal analysis, differential scanning calorimetry, and scanning electron microscopy. Cell attachment on polyurethane–GNT/NW composites was investigated using fat-derived mesenchymal stem cells. Addition of 50 or 100 ppm GNT/NW had significant effects on thermal, mechanical, and cell attachment of polyurethane. Higher crosslink density and better cell attachment and proliferation were observed in polyurethane containing 50 ppm GNT/NW. The results revealed that GNT/NW formed hydrogen bonding with the polyurethane matrix and improved the thermomechanical properties of nanocomposites. Compared with pure PU, better cellular attachment on polyurethane–GNT/NW composites was observed resulting from the improved surface properties of composites. - Highlights: • Polyurethane–gold nanotubes/nanowires (GNT/NWs) composites were synthesized. • Tan δ, E′ and E″ were increased upon addition of 50 ppm of GNT/NW. • Better cell attachment was observed in composites containing 50 ppm of GNT/NW. • GNT/NWs can make a bridge between the pores of the porous polymeric scaffolds. • GNT/NWs increased the crosslink density of the polymeric matrix

  11. Synthesis and characterization of gold nanotube/nanowire–polyurethane composite based on castor oil and polyethylene glycol

    Energy Technology Data Exchange (ETDEWEB)

    Ganji, Yasaman, E-mail: y.ganji@aut.ac.ir [Faculty of Biomedical Engineering, Amirkabir University of Technology, 424 Hafez Ave., Tehran (Iran, Islamic Republic of); Kasra, Mehran, E-mail: mkasra@aut.ac.ir [Faculty of Biomedical Engineering, Amirkabir University of Technology, 424 Hafez Ave., Tehran (Iran, Islamic Republic of); Salahshour Kordestani, Soheila, E-mail: s.kordestani@aut.ac.ir [Faculty of Biomedical Engineering, Amirkabir University of Technology, 424 Hafez Ave., Tehran (Iran, Islamic Republic of); Bagheri Hariri, Mohiedin, E-mail: mohibagheri@gmail.com [Materials Science and Engineering Department, Sharif University of Technology, Azadi Ave., Tehran (Iran, Islamic Republic of)

    2014-09-01

    Gold nanotubes/nanowires (GNT/NW) were synthesized by using the template-assisted electrodeposition technique and mixed with castor oil–polyethylene glycol based polyurethane (PU) to fabricate porous composite scaffolds for biomedical application. 100 and 50 ppm of GNT/NW were used to synthesize composites. The composite scaffolds were characterized by Fourier transform infrared spectroscopy, dynamic mechanical thermal analysis, differential scanning calorimetry, and scanning electron microscopy. Cell attachment on polyurethane–GNT/NW composites was investigated using fat-derived mesenchymal stem cells. Addition of 50 or 100 ppm GNT/NW had significant effects on thermal, mechanical, and cell attachment of polyurethane. Higher crosslink density and better cell attachment and proliferation were observed in polyurethane containing 50 ppm GNT/NW. The results revealed that GNT/NW formed hydrogen bonding with the polyurethane matrix and improved the thermomechanical properties of nanocomposites. Compared with pure PU, better cellular attachment on polyurethane–GNT/NW composites was observed resulting from the improved surface properties of composites. - Highlights: • Polyurethane–gold nanotubes/nanowires (GNT/NWs) composites were synthesized. • Tan δ, E′ and E″ were increased upon addition of 50 ppm of GNT/NW. • Better cell attachment was observed in composites containing 50 ppm of GNT/NW. • GNT/NWs can make a bridge between the pores of the porous polymeric scaffolds. • GNT/NWs increased the crosslink density of the polymeric matrix.

  12. Effect of the incorporation of chitosan on the physico-chemical, mechanical properties and biological activity on a mixture of polycaprolactone and polyurethanes obtained from castor oil.

    Science.gov (United States)

    Arévalo, Fabian; Uscategui, Yomaira L; Diaz, Luis; Cobo, Martha; Valero, Manuel F

    2016-11-01

    In the present study, polyurethane materials were obtained from castor oil, polycaprolactone and isophorone diisocyanate by incorporating different concentrations of chitosan (0.5, 1.0 and 2.0% w/w) as an additive to improve the mechanical properties and the biological activity of polyurethanes. The polyurethanes were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, stress/strain fracture tests and swelling analysis, and the hydrophilic character of the surface was determined by contact angle trials. The objectives of the study were to evaluate the effect of the incorporation of chitosan on the changes of the physico-chemical and mechanical properties and the in vitro biological activity of the polyurethanes. It was found that the incorporation of chitosan enhances the ultimate tensile strength of the polyurethanes and does not affect the strain at fracture in polyurethanes with 5% w/w of polycaprolactone and concentrations of chitosan ranging from 0 to 2% w/w. In addition, PCL5-Q-PU formulations and their degradation products did not affect cell viability of L929 mouse fibroblast and 3T3, respectively. Polyurethane formulations showed antibacterial activities against Staphylococcus aureus and Escherichia coli bacteria. The results of this study have highlighted the potential biomedical application of this polyurethanes related to soft and cardiovascular tissues. © The Author(s) 2016.

  13. (11) EFFECT OF POWDERED CASTOR BEAN

    African Journals Online (AJOL)

    Adeyinka Odunsi

    The behaviour of the rats was monitored over the three day period. The histology of ... Poisoning by exposure to castor oil seed ... make necklaces in Mexico, because of their ... was 9 to10 weeks. ... responsible for killing 50 percent of the test.

  14. (11) EFFECT OF POWDERED CASTOR BEAN

    African Journals Online (AJOL)

    Adeyinka Odunsi

    A study was carried out at the Toxicology laboratory of the Department of Crop and Environmental protection,. Ladoke Akintola University of Technology Ogbomoso, to determine the effects of powdered castor oil seed. (Ricinus communis L.Euphorbiaceae) on kidney, liver, spleen of albino rats. The rats were in five groups, ...

  15. The application of 1,8-cineole, a terpenoid oxide present in medicinal plants, inhibits castor oil-induced diarrhea in rats.

    Science.gov (United States)

    Jalilzadeh-Amin, Ghader; Maham, Massoud

    2015-04-01

    1,8-Cineole, a terpene, characterized as a major constituent occurring in the essential oils of several aromatic plants. It is widely used in pharmaceutical industry, as a food additive and for culinary purposes. This study investigates the inhibitory effect of 1,8-cineole on transit time and diarrhea in animal models. Acute toxicity and lethality of 1-8-cineole was determined by Lork's guidelines. The antidiarrheal effect of 1,8-cineole was investigated by determining the intestinal transit and enterpooling in rats. In all experiments, different doses of 1,8-cineole (20-120 mg/kg), atropine, and loperamide were administered orally. The LD50 of 1,8-cineole for oral administration was estimated to be 1280 mg/kg. 1,8-Cineole (20-120 mg/kg) did not show a significant decrease in small intestine transit (p > 0.05); however, the highest dose displayed a significant decrease in comparison with atropine (p castor oil transit test. 1,8-Cineole significantly delayed the onset of diarrhea to -142.33 ± 6.08 min at 120 mg/kg, while the time was 103.66 ± 20.73 min for the control and >240 min for the loperamide. Moreover, 1,8-cineole significantly decreased intestinal fluid accumulation (p < 0.05). This study demonstrated antispasmodic and antisecretory activities of 1,8-cineole and rationalized the traditional use of the plant containing various levels of this terpene in the treatment of gastrointestinal complains such as diarrhea.

  16. Oil sands development update

    International Nuclear Information System (INIS)

    1999-01-01

    A detailed review and update of oil sands development in Alberta are provided covering every aspect of the production and economic aspects of the industry. It is pointed out that at present oil sands account for 28 per cent of Canadian crude oil production, expected to reach 50 per cent by 2005. Based on recent announcements, a total of 26 billion dollars worth of projects are in progress or planned; 20 billion dollars worth of this development is in the Athabasca area, the remainder in Cold Lake and other areas. The current update envisages up to 1,800,000 barrels per day by 2008, creating 47,000 new jobs and total government revenues through direct and indirect taxes of 118 billion dollars. Provinces other than Alberta also benefit from these development, since 60 per cent of all employment and income created by oil sands production is in other parts of Canada. Up to 60 per cent of the expansion is for goods and services and of this, 50 to 55 per cent will be purchased from Canadian sources. The remaining 40 per cent of the new investment is for engineering and construction of which 95 per cent is Canadian content. Aboriginal workforce by common consent of existing operators matches regional representation (about 13 per cent), and new developers are expected to match these standards. Planned or ongoing development in environmental protection through improved technologies and optimization, energy efficiency and improved tailings management, and active support of flexibility mechanisms such as emission credits trading, joint implementation and carbon sinks are very high on the industry's agenda. The importance of offsets are discussed extensively along with key considerations for international negotiations, as well as further research of other options such as sequestration, environmentally benign disposal of waste, and enhanced voluntary action

  17. Efeito do óleo de mamona em composições de borracha natural contendo sílica Effects from the castor oil on silica-filled natural rubber compounds

    Directory of Open Access Journals (Sweden)

    Helson M. da Costa

    2004-03-01

    Full Text Available O potencial do óleo de mamona como um ativador para a vulcanização de composições de borracha natural (NR contendo sílica foi investigado. Utilizando-se um planejamento de experimentos adequado, manteve-se a concentração de sílica e outros aditivos constantes enquanto as quantidades de ácido esteárico, óleo de mamona e poli(etileno-glicol foram variadas. A cura foi conduzida em um reômetro de disco oscilatório TI-100 e a variável de controle escolhida foi a resistência à tração. Os resultados demonstraram que o óleo de mamona sozinho não exerce influência considerável sobre o desempenho mecânico da borracha natural em presença de sílica.The possible use of castor oil fatty acid as an activator for the vulcanization reaction in silica-filled natural rubber (NR compounds was investigated. The design and analysis of the experiments were carried out by keeping constant the concentration of silica and the other ingredients while the amounts of stearic acid, castor oil and poly(ethylene glycol were varied. Cure was carried out on a TI-100 oscillating disk rheometer, and the tensile strength was chosen as the control variable. The results show that the addition of castor oil does not significantly change the mechanical performance of silica-filled natural rubber compounds.

  18. Cytoxicity, dynamic and thermal properties of bio-based rosin-epoxy resin/ castor oil polyurethane/ carbon nanotubes bio-nanocomposites.

    Science.gov (United States)

    Huo, Li; Wang, Dan; Liu, Hongmei; Jia, Pan; Gao, Jungang

    2016-08-01

    In order to prepare bio-nanocomposites with no-cytotoxicity, the rosin-based epoxy resin (MPAER) and castor oil-based polyurethane (COPU) were synthesized and carbon nanotubes (CNTs) was used to enhance the properties of curing MPAER/COPU materials. The curing reaction, dynamic mechanical and thermal properties of this system were characterized by FTIR, NMR, DMA, TG et al. The cytotoxicity of materials is evaluated for HeLa cells using a MTT cell-viability assay. The results showed that COPU can cure MPAER and CNTs can increase effectively the properties of MPAER/COPU nanocomposites. The Tg of MPAER/COPU/CNTs has the highest value when CNTs content is 0.4 wt%, which is 52.4 °C higher than the pure MPAER/COPU. Thermal stability of the nanocomposites is enhanced by the addition of CNTs, the initial decomposition temperature Td5 of the sample No. 0.4 has increased from 284.5 to 305.2 °C, which is 20.7 °C higher than No. 0. The impact strength of the No. 0.4 film is 15 kg cm higher than the pure resin system. The survival rate of HeLa cells to the products is greater than 90% within 48 and 72 h, which demonstrate that this material has excellent biocompatibility and no obvious cytotoxicity for HeLa cells, which may be used in the medical treatment.

  19. Corneal-protective effects of an artificial tear containing sodium hyaluronate and castor oil on a porcine short-term dry eye model.

    Science.gov (United States)

    Hasegawa, Takashi; Amako, Hideki; Yamamoto, Takeshi; Tazawa, Mariko; Sakamoto, Yuji

    2014-09-01

    The corneal-protective effects of an artificial tear containing sodium hyaluronate (SH) and castor oil (CO) were evaluated on a porcine short-term dry eye model. Fresh porcine eyes with an intact cornea were treated with an artificial tear of saline, SH solution (0.1%, 0.5% or 1%), CO solution (0.5%, 1% or 5%) or a mixture solution containing 0.5% SH and 1% CO and then desiccated for 60, 90 or 180 min. To assess corneal damage, the eyes were stained with methylene blue (MB) or lissamine green (LG). The staining score of MB, absorbance of MB extracted from the cornea and staining density of LG increased significantly with increasing desiccation time in untreated and all artificial tear-treated eyes, although there were no significant differences in staining scores and absorbance of MB between eyes treated continuously with saline and 1% SH-treated ones at 60 and 90 min of desiccation or the mixture-treated eyes at 60 min of desiccation. No significant differences in the staining density of LG were also found between continuous saline-treated eyes and ones desiccated for 60 min and treated with 1% SH and the mixture. Mild cytoplasmic vacuolations were histopathologically observed in the basal and wing cells in eyes desiccated for 60 min and treated with 1% SH and the mixture. The mixture solution containing 0.5% SH and 1% CO has protective effects against corneal desiccation similar to those of 1% SH and would be helpful as an artificial tear.

  20. CASTOR{sup R} 1000/19: Development and Design of a New Transport and Storage Cask

    Energy Technology Data Exchange (ETDEWEB)

    Funke, Th.; Henig, Ch. [GNS mbH, Hollestrasse 7A, 45127 Essen (Germany)

    2008-07-01

    The design of the new transport and storage cask type CASTOR{sup R} 1000/19 is presented in this paper. This cask was developed for the dry interim storage of spent VVER1000 fuel assemblies concerning the requirements of the Temelin NPP, Czech Republic. While the cask body is based on well-known ductile cast iron cask types with in-wall moderator, the basket follows a new concept. The basket is able to carry 19 fuel assemblies with a total decay heat power up to approximately 17 kW. The cask fulfils all requirements for a type B(U)F package. The main nuclear, mechanical and thermal properties of the cask are illustrated for normal conditions and for hypothetical accident scenarios during transport and storage. The main steps of the handling procedure such as loading the cask, drying the cavity and mounting the double lid system for tightness during interim storage are shown in principle. For this handling, boundary conditions at the NPP site such as dimensions, weight and the loading machine interface are considered. (authors)

  1. Vegetable oil based liquid nanocomposite dielectric

    Directory of Open Access Journals (Sweden)

    Leon Chetty

    2013-01-01

    Full Text Available Physically smaller dielectric materials would improve the optimisation of space for power systems. Development of nanotechnology provides an effective way to improve the performances of insulating oils used in power system applications. In this research study, we focused on the development of nanomodified vegetable oils to be used in power transformers. Higher conduction currents were observed in virgin linseed oil than in virgin castor oil. However, for both virgin linseed and virgin castor oil, the DC conduction current increased approximately linearly with the applied DC voltage. In nanomodified linseed oil, the characteristic curve showed two distinct regions: a linear region (at lower applied voltage and a saturation region (at slightly higher voltage. Conversely, in nanomodified castor oil, the characteristic curve showed three distinct regions: a linear region (at lower applied voltage, a saturation region (at intermediate applied voltage and an exponential growth region (at higher applied voltage. The nanomodified linseed oil exhibited a better dielectric performance than the nanomodified castor oil. Overall, the addition of nanodielectrics to vegetable oils decreased the dielectric performance of the vegetable oils. The results of this study contribute to the understanding of the pre-breakdown phenomenon in liquid nanocomposite dielectrics.

  2. Genome-Wide Identification, Evolutionary Analysis, and Stress Responses of the GRAS Gene Family in Castor Beans

    Directory of Open Access Journals (Sweden)

    Wei Xu

    2016-06-01

    Full Text Available Plant-specific GRAS transcription factors play important roles in regulating growth, development, and stress responses. Castor beans (Ricinus communis are important non-edible oilseed plants, cultivated worldwide for its seed oils and its adaptability to growth conditions. In this study, we identified and characterized a total of 48 GRAS genes based on the castor bean genome. Combined with phylogenetic analysis, the castor bean GRAS members were divided into 13 distinct groups. Functional divergence analysis revealed the presence of mostly Type-I functional divergence. The gene structures and conserved motifs, both within and outside the GRAS domain, were characterized. Gene expression analysis, performed in various tissues and under a range of abiotic stress conditions, uncovered the potential functions of GRAS members in regulating plant growth development and stress responses. The results obtained from this study provide valuable information toward understanding the potential molecular mechanisms of GRAS proteins in castor beans. These findings also serve as a resource for identifying the genes that allow castor beans to grow in stressful conditions and to enable further breeding and genetic improvements in agriculture.

  3. Oil for development 2009

    Energy Technology Data Exchange (ETDEWEB)

    2010-09-15

    In this report present key achievements for each of the various cooperation countries. Oil for Development (OfD) assistance has been important for the ability of a country like Ghana to improve petroleum resource management on its most important oil and gas field, and to better safeguard that the petroleum activities are conducted in an environmentally sustainable way. Competence building on Increased Oil Recovery (IOR), and negotiation training have helped to increase both the resource extraction potential and the revenue generation potential of a more mature oil producing country like Iraq. Furthermore, OfD has contributed to improving the legislative frameworks in several of our cooperating countries, including Afghanistan, Cambodia and Madagascar, although it will take time before we can assess to what extent the laws have been implemented. OfD's strong focus on providing legal assistance reflects our belief that clear divisions of roles and firm legal mandates are prerequisites for good governance of the petroleum sector and for attracting serious investors. A lot of our capacity building took place through seminars and more tailored workshops with a national or regional scope. We believe that some of these events have significantly increased awareness as well as the level of debate among government institutions and civil society. The oil production accounting workshop in Nigeria and the NOC workshop in Timor-Leste are particularly valid examples. Timor-Leste also addressed other petroleum sector governance issues with a focus on including civil society and by the end of 2009 had nearly fulfilled all criteria for becoming Extractive Industries Transparency Initiative (EITI) compliant. It should be noted that OfD assistance only made a relatively small contribution to this process, which was very much nationally driven. Petroleum related environmental issues were addressed at different levels and from different angles. A thorough environmental needs

  4. Sustainable and economic feasibility of castor bean oil production: a methodology to support investments decision taking; Viabilidade economica e sustentabilidade da producao de oleo de mamona: uma metodologia de suporte a decisao de investimentos

    Energy Technology Data Exchange (ETDEWEB)

    Maia, Glawther Lima [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Mestrado em Logistica e Pesquisa Operacional; Arruda, Joao Bosco Furtado [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil)

    2008-07-01

    The castor bean agribusiness is supported by a complex supply chain that involves several inputs, main products and other derived products. So, the control of production costs is a basic and extremely important activity for the optimization of management processes. Using literature research, case study and assessment of scenarios, the present work was developed with the objective of conceiving a methodology, based on theoretical and economical aspects, the formation of costs and the revenue forecasting, which is applied with the aid of a computational program for supporting decision taking in the castor bean small producers agribusiness. The results obtained in the case study show, for example, that about 40% of the projects are considered accepted under the criterion of recovering the invested capital in less than 2 years. Also, it reveals that 75% of the projects contribute for the increase of the producer income and about 63% of the projects provide enough profit to add value to the producer's properties. Finally, it is clear that the proposed methodology makes easier a better agricultural planning, allowing a better utilization of the raw material and it facilitates the analysis of diversifying other derived products and revenue sources in the castor bean chain. (author)

  5. Sustainable and economic feasibility of castor bean oil production: a methodology to support investments decision taking; Viabilidade economica e sustentabilidade da producao de oleo de mamona: uma metodologia de suporte a decisao de investimentos

    Energy Technology Data Exchange (ETDEWEB)

    Maia, Glawther Lima [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Mestrado em Logistica e Pesquisa Operacional; Arruda, Joao Bosco Furtado [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil)

    2008-07-01

    The castor bean agribusiness is supported by a complex supply chain that involves several inputs, main products and other derived products. So, the control of production costs is a basic and extremely important activity for the optimization of management processes. Using literature research, case study and assessment of scenarios, the present work was developed with the objective of conceiving a methodology, based on theoretical and economical aspects, the formation of costs and the revenue forecasting, which is applied with the aid of a computational program for supporting decision taking in the castor bean small producers agribusiness. The results obtained in the case study show, for example, that about 40% of the projects are considered accepted under the criterion of recovering the invested capital in less than 2 years. Also, it reveals that 75% of the projects contribute for the increase of the producer income and about 63% of the projects provide enough profit to add value to the producer's properties. Finally, it is clear that the proposed methodology makes easier a better agricultural planning, allowing a better utilization of the raw material and it facilitates the analysis of diversifying other derived products and revenue sources in the castor bean chain. (author)

  6. Castor bean response to zinc fertilization

    Energy Technology Data Exchange (ETDEWEB)

    Chaves, Lucia Helena Garofalo; Cunha, Tassio Henrique Cavalcanti da Silva; Lima, Vinicius Mota; Cabral, Paulo Cesar Pinto; Barros Junior, Genival; Lacerda, Rogerio Dantas de [Universidade Federal de Campina Grande (UAEAg/UFCG), PB (Brazil). Unidade Academica de Engenharia Agricola

    2008-07-01

    Zinc is a trace element and it is absolutely essential for the normal healthy growth of plants. This element plays a part of several enzyme systems and other metabolic functions in the plants. Castor beans (Ricinus communis L.) crop is raising attention as an alternative crop for oil and biodiesel production. Despite the mineral fertilization is an important factor for increasing castor beans yield, few researches has been made on this issue, mainly on the use of zinc. In order to evaluate the effects of zinc on growth of this plant an experiment was carried out in a greenhouse, in Campina Grande, Paraiba State, Brazil, from July to December 2007. The substrate for the pot plants was a 6 mm-sieved surface soil (Neossolo Quartzarenico). The experimental design was a completely randomized with three replications. The treatments were composed of five levels of Zn (0; 2; 4; 6 and 8 mg dm{sup -3}), which were applied at the time of planting. One plant of castor bean, cultivar BRS 188 - Paraguacu, was grown per pot after thinning and was irrigated whenever necessary. Data on plant height, number and length of leaves and stem diameter were measured at 21, 34, 77 and 103 days after planting. Under conditions that the experiment was carried out the results showed that the Zn levels used, did not affect the castor bean plants growth. (author)

  7. Modulating the properties of sunflower oil based novel emulgels using castor oil fatty acid ester: prospects for topical antimicrobial drug delivery.

    Science.gov (United States)

    Behera, B; Biswal, D; Uvanesh, K; Srivastava, A K; Bhattacharya, Mrinal K; Paramanik, K; Pal, K

    2015-04-01

    The current study describes the effect of polyglycerol polyricinoleate (PGPR) on the properties of sunflower oil and span-40 based emulgels. The prepared emulgels contained PGPR in varied concentrations. The microstructure of the emulgels was characterized by bright-field microscopy. The molecular interactions amongst the components of the emulgels were studied using FTIR spectroscopy. The flow and mechanical behaviors of the emulgels were studied using cone-and-plate viscometer and static mechanical tester, respectively. The efficiency of the metronidazole-loaded emulgels as antimicrobial formulations was tested in vitro. E. coli was used as the model microorganism for the antimicrobial study. The emulgels were also explored for iontophoretic delivery applications. The biocompatibility of the emulgels was tested using human keratinocytes (HaCaT). The microscopic evaluation of the emulgels indicated formation of biphasic formulations. FTIR studies suggested a decrease in the hydrogen bonding amongst the components of the emulgels as the concentration of the PGPR was increased. Viscosity studies indicated shear-thinning property of the emulgels. An increase in the PGPR concentration resulted in the reduction in the mechanical properties of the emulgels. Incorporation of PGPR resulted in the decrease in the drug released (both passive and iontophoresis) from the emulgels. The emulgels were found to be cytocompatible in the presence of keratinocytes. The drug loaded emulgels showed good antimicrobial activity against E. coli. In gist, the developed emulgels can be tried for controlled delivery of antimicrobial drugs. The physical and the release properties of the emulgels can be modulated by incorporating PGPR in varied proportions. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Propriedades mecânicas do cimento ósseo e da poliuretana de mamona com e sem catalisador Mechanical properties of bone cement and castor oil-based polyurethane with and without a catalyst

    Directory of Open Access Journals (Sweden)

    A.F.M. Lima

    2008-10-01

    Full Text Available Avaliou-se o comportamento mecânico do polímero de mamona, tendo por variáveis o tempo de produção e a presença de catalisador, e utilizando como padrão comparativo o cimento ósseo (polimetilmetacrilato. Foram estabelecidos três grupos experimentais, de acordo com o tipo de corpo de prova (cilindro ou barra e polímero utilizado, que foram posteriormente subdivididos em subgrupos conforme o tempo após produção, ou seja, 24, 48 e 72 horas. O ensaio de compressão analisou a carga máxima e a tensão e o ensaio de dobramento estudou o módulo de dobramento e a resistência. Estatisticamente não houve diferenças nos valores de resistência à compressão ou ao dobramento às 24, 48 e 72 horas após a produção do polimetilmetacrilato e da poliuretana, com ou sem catalisador. A poliuretana com catalisador foi a mais resistente nos ensaios de compressão, apresentando módulo de dobramento semelhante ao do polimetilmetacrilato e resistência ao dobramento superior à da poliuretana sem catalisador. Conclui-se que: o tempo não alterou as propriedades mecânicas dos compósitos avaliados; o catalisador melhorou o desempenho mecânico da poliuretana de mamona; na resistência mecânica à compressão, a poliuretana com catalisador suportou mais carga que o polimetilmetacrilato.The mechanical properties of castor oil-based polyurethane was evaluated considering post-production time and the presence of a catalyst as variables and using bone cement (polymethylmetacrylate as a comparative pattern. According to proof body type (cylinders or bars and the used polymer, three experimental groups were established. Such groups were later subdivided according to post-production time, namely, 24, 48, and 72 hours. A compression assay analyzed maximum load and tension, and a folding assay evaluated the folding module and resistance. There were no statistical differences in the values for resistance to compression or folding at 24, 48, and 72 hours

  9. Haematological and Serum Biochemical Parameters of Broiler Chickens Fed Varying Dietary Levels of Fermented Castor Oil Seed Meal (Ricinus communis L. and Different Methionine Sources in South Western Nigeria

    Directory of Open Access Journals (Sweden)

    Ayorinde David Adeniran

    2017-09-01

    Full Text Available In this experiment, the effect of varying dietary levels of fermented castor oil seed meal (FCSM and different methionine sources (DL-methionine and herbal methionine on haematological and serum biochemical parameters of broilers. A total of 240 one-day-old Anak broiler chicks were used in the experiment lasted 56 days. The dietary experiment was laid out as a completely randomized design in a 4 × 2 factorial arrangement consisting of 4 dietary levels of FCSM (0, 50, 100 and 150 g/kg and 2 methionine sources (DL-methionine and herbal methionine. The birds were weighed and randomly distributed into 8 treatments with 3 replicates of 10 birds each. During the starter phase of the experiment, haemoglobin, red blood cell count, mean corpuscular haemoglobin concentration and eosinophil counts were higher (P

  10. CASTOR end-to-end monitoring

    International Nuclear Information System (INIS)

    Rekatsinas, Theodoros; Duellmann, Dirk; Pokorski, Witold; Ponce, Sebastien; Rabacal, Bartolomeu; Waldron, Dennis; Wojcieszuk, Jacek

    2010-01-01

    With the start of Large Hadron Collider approaching, storage and management of raw event data, as well as reconstruction and analysis data, is of crucial importance for the researchers. The CERN Advanced STORage system (CASTOR) is a hierarchical system developed at CERN, used to store physics production files and user files. CASTOR, as one of the essential software tools used by the LHC experiments, has to provide reliable services for storing and managing data. Monitoring of this complicated system is mandatory in order to assure its stable operation and improve its future performance. This paper presents the new monitoring system of CASTOR which provides operation and user request specific metrics. This system is build around a dedicated, optimized database schema. The schema is populated by PL/SQL procedures, which process a stream of incoming raw metadata from different CASTOR components, initially collected by the Distributed Logging Facility (DLF). A web interface has been developed for the visualization of the monitoring data. The different histograms and plots are created using PHP scripts which query the monitoring database.

  11. The CASTOR initiative

    Energy Technology Data Exchange (ETDEWEB)

    Le Thiez, Pierre [GEOGREEN (France)

    2008-07-15

    In this paper it is spoken over the CASTOR project, which has 31 partners of 12 European countries. Also it is spoken on the strategy for the CO{sub 2} reduction in Europe; what on the capture and post-combustion has been done, and what as far as geologic CO{sub 2} storage has been accomplished. [Spanish] En esta ponencia se habla sobre el proyecto Castor, el cual cuenta con 31 socios de 12 paises europeos. Tambien se habla sobre la estrategia para la reduccion de CO{sub 2} en Europa; lo que se ha hecho en cuanto a captura post-combustion y lo que se ha hecho para el almacenamiento geologico de CO{sub 2}.

  12. Development status of the experimental and numerical load analysis of package units CASTOR registered under drop test conditions

    International Nuclear Information System (INIS)

    Voelzer, Walter; Schaefer, Marc; Rumanus, Erkan; Liedtke, Ralph; Brehmer, Frank

    2012-01-01

    The mechanical integrity of package units CASTOR registered for a 9-m drop test under accident conditions has to be demonstrated according the requirements of IAEA among others. For reduction of the loads the containers have to be equipped with shock absorbers on the bottom and top sides. The determination of loads under drop test conditions can be performed with experimental or numerical methods. Due to the complexity of the load state and the verification of results both methods are usually used for integrity demonstration. The numerical codes have to model the short-term dynamic behavior of the whole container for different drop orientations and temperatures, local stress states have to be quantifiable for assessment. One of the problems is the modeling of the material behavior of wood that is used in the shock absorbers. The so far used energetic calculation approach will be replaced by a dynamic approach, the numerical models will have to be verified by experimental drop tests.

  13. Interpenetrating polymer networks based on polyol modified castor ...

    Indian Academy of Sciences (India)

    Interpenetrating polymer networks (IPNs) of glycerol modified castor oil polyurethane (GC–PU) and poly[2-hydroxyethylmethacrylate] (PHEMA) were synthesized using benzoyl peroxide as initiator and N,N-methylene bis acrylamide as crosslinker. GC–PU/PHEMA interpenetrating polymer networks were obtained by ...

  14. Inheritance of Plant Height in two Ethiopian Castor Varieties

    African Journals Online (AJOL)

    The green revolution in Asia was led by the semi dwarf varieties of wheat and rice ... Castor (Racinnus communis L.) is an industrial non edible oil seed that originated in East ... At the fourth generation single plants from each inbred line were.

  15. Análise macroscópica e histológica do emprego da poliuretana derivada do óleo de mamona (Ricinus communis aplicada na tíbia de cães em fase de crescimento Macroscopic and histopathologic evaluations of the use of polyurethane resins derived from castor oil (Ricinus communis applied in the tibia of the puppies

    Directory of Open Access Journals (Sweden)

    Patricia Popak Maria

    2003-08-01

    Full Text Available OBJETIVO: Estudar o efeito da poliuretana de mamona aplicada ao osso de cães em crescimento. MÉTODOS: Foram utilizados 12 cães subdivididos aleatoriamente em 3 grupos, os quais receberam o implante de mamona na face medial proximal da tíbia, com análise macroscópica e histopatológica aos 30 (GIII, 60 (GII e 90 (GI dias. RESULTADOS: A poliuretana foi recoberta por uma cápsula conjuntiva fibrosa, não ocorrendo proliferação óssea ao seu redor. CONCLUSÃO: A poliuretana é biocompatível, comportando-se como espaçador biológico em cães. Nesta espécie não ocorre a osteointegração.PURPOSE: To analyze the effects of castor oil derived poliurethane, when applied to bones of puppies. METHODS: Twelve dogs, randomly divided in 3 groups, received a castor oil derived poliurethane at the medial side of the proximal tibia. Gross and histopathologic evaluations were performed at 30 (GIII, 60 (GII and 90 (GI days. RESULTS: The poliurethane was enclosed in a connective fibrous tissue capsule and there was no new bone formation around it. CONCLUSION: The castor oil derived poliurethane is biocompatible and behaves as a biological "stand off" in dogs. Osteointegration does not occur in this species.

  16. Preliminary experiments aiming the production of `vegetable petroleum` by the catalytic conversion of `babacu` and castor oils; Experimentos preliminares visando a producao de petroleo vegetal, pela conversao catalitica de oleos de mamona e babassu

    Energy Technology Data Exchange (ETDEWEB)

    Weyne, Gastao Rubio de Sa [Sao Paulo Univ., SP (Brazil). Escola Politecnica. Dept. de Engenharia Quimica

    1989-09-01

    The catalytic conversion of vegetable oils produces hydrocarbons and despite the industrial production of that raw materials being expensive and even insufficient for a substitution program, Brazil has conditions to increase it and to get lower cost because the very much favourable conditions of soil to plant oleaginous seeds. In this work are presented the preliminary experimentalresults of this catalytic conversion in laboratory scale carried out in the Department of Chemical Engineering at Polytechnical School of Sao Paulo University, using babassu and castor oils and several catalysts at bentonits, zeolites and sodium chloride. The `vegetable petroleum` produced was quantitatively analysed, being determined the paraffin, olefinic, naphtene and aromatic hydrocarbons. ASTM distillation was carried out. At the temperature of 300 deg C and atmospheric pression, the batter catalyst was the sodium chloride, giving a yield larges than 80% volume. It shows that, in spite of producing hydrocarbons at higher costs than the ones obtained from petroleum, it is necessary to enlarge the studies for the conversion to hydrocarbons as one of the answers to the Brazilian energetic problem. (author) 13 refs., 4 tabs.

  17. The castor bean breeding and the energy substitution; A cultura da mamoneira e a substituicao de energia

    Energy Technology Data Exchange (ETDEWEB)

    Savy Filho, A; Banzatto, N V; Bernardi, J A; Kurachi, S A.H.; Azzini, A [Instituto Agronomico de Campinas, SP (Brazil)

    1985-12-31

    This work introduces castor bean as a source of renewable energy. It identifies the potential of production of oil to be used as fuel. Besides, it makes a survey about the production of raw products for new uses. It also presents the available technology on seed and other materials derived from castor cropping and also showing the potential of castor bean not only with the current cropping systems but also with more specialized practices, such as castor bean crop mechanization. 11 refs., 1 fig., 4 tabs.

  18. SUBACUTE AND MULTIGENERATIONAL TOXICITY EVALUATION OF CASTOR OIL POLYMER INGESTION IN RATS AVALIAÇÃO DA TOXICIDADE SUBAGUDA E MULTIGERACIONAL DA INGESTÃO DE DERIVADO DO POLÍMERO DE MAMONA EM RATOS

    Directory of Open Access Journals (Sweden)

    Gilberto Chierice

    2009-04-01

    Full Text Available Castor oil polymer is a biomaterial that can be used to fill bone defects. Biomaterials should present some characteristics such as: biocompatibility, inert, absence of toxin radical and vapour discharge and permit the organism to recognize them as a part of their structure. The aim of this study was to investigate changes in water ingestion, feed intake, weight gain and toxic effects in rats (Rattus norvegicus after ingestion of 0, 10, 25 and 50% of castor oil polymer (COP, Ricinus communis. In groups that received 10 and 25% of COP the weight gain was smaller than the control group. Feed intake in control group was greater than in groups 10 and 50% COP. The intake of castor oil polymer reduced feed intake and water ingest probably because of the palatability of the product. In the second part of this study (multigenerational there were no toxic effects in the offspring, as external birth defects or alterations incompatible with life, in spite of the fact that lower weight were observed in males and females of the second generation.

    KEY WORDS: Biomaterials, bone defects, polymer, Ricinus communis. Os biomateriais são polímeros artificiais desenvolvidos para substituir tecidos orgânicos danificados e preencherem falhas ósseas. Eles devem apresentar características como a biocompatibilidade, serem inertes, não liberarem vapores e radicais tóxicos e permitirem ao organismo reconhecê-los como parte de sua estrutura. Procurou-se determinar a ingestão de água, o consumo de ração, ganho de peso e possível efeito tóxico decorrentes da ingestão de três doses (10%, 25% e 50% do derivado do polímero de mamona (PM, Ricinus communis, adicionado à água de bebida, em ratos (Rattus norvegicus. Nos grupos que receberam 10% e 25% do PM, o ganho de peso foi menor (P?0,05, quando comparado ao grupo-controle. O consumo de ração nos grupos que receberam 10% e 50% de PM foi menor em relação ao grupo-controle. A ingestão do pol

  19. Kashagan oil field development. Kazakhstan

    International Nuclear Information System (INIS)

    Urbaniak, D.; Gerebizza, E.; Wasse, G.; Kochladze, M.

    2007-12-01

    Based on our research and field investigations of the Kashagan oil field development and relevant infrastructure in the Atyrau and Mangistau regions of Kazakhstan (cities and vicinities of Aktau, Atash, Atyrau, Bautino, Bolashak, Karabatan and Koshanai) evidence has been collected that raises serious concerns about environmental, social and health effects of this oil field development - such as sulphur emissions and storage which may pose serious threats for the communities close to the Kashagan oil facilities and for the Caspian Sea environment. Furthermore, since becoming the single Operator of the North Caspian Sea Production Sharing Agreement (PSA), the Agip Kazakhstan North Caspian Operating Company N.V. (Agip KCO) has failed to release all information available on the environmental, health and social impacts of its operations in the Kashagan oil field. As requested by the local communities and required by Constitution of Kazakhstan Republic and Aarhus Convention on Access to Information, Public Participation in Decision-Making and Access to Justice in Environmental Matters ratified by Kazakhstan in 2001, such information must be made available. There is also a growing concern among the civil society that the European Commission through its officials is publicly expressing support to European oil companies' members of the Agip KCO despite their failure to fulfil basic environmental regulations. This continued support contradicts the European Union's fundamental values and frequent statements related to Human Rights and Sustainable Development. Thousands of people have already been relocated in the region because of sulphur emissions and other highly poisonous chemicals such as mercaptans, which are present at very high levels in Northern Caspian oil. Unprotected storage of large quantities of sulphur is also recognised as a major cause of acid rain on a global level. This Report implores Agip KCO to release all available and required information on the

  20. Strategic thinking on oil development in China

    International Nuclear Information System (INIS)

    Liu Keyu; Shan Weiguo

    2005-01-01

    It is expected that crude oil production in China will maintain its current level until 2020. Driven by higher living standards and the rapid development of energy intensive industries, China's oil demand will increase rapidly and might lead to heavier import dependency. Three cases of demand forecasts are presented, but for the sake of sustainable economic and social development, neither the high nor the middle case is favourable for China. Thus, China must seek a path of oil saving economic development, and limit oil consumption to no more than 350MT in 2010 and 450MT in 2020. Meanwhile, in order to secure the oil supply, the following strategies should be adopted: save oil and develop alternative energies; stabilise domestic oil production and to diversify oil imports and overseas oil exploration and development; accelerate the gas industry and introduce strategic petroleum reserves. (author)

  1. Phytotoxicity of three plant-based biodiesels, unmodified castor oil, and Diesel fuel to alfalfa (Medicago sativa L.), lettuce (Lactuca sativa L.), radish (Raphanus sativus), and wheatgrass (Triticum aestivum).

    Science.gov (United States)

    Bamgbose, Ifeoluwa; Anderson, Todd A

    2015-12-01

    The wide use of plant-based oils and their derivatives, in particular biodiesel, have increased extensively over the past decade to help alleviate demand for petroleum products and improve the greenhouse gas emissions profile of the transportation sector. Biodiesel is regarded as a clean burning alternative fuel produced from livestock feeds and various vegetable oils. Although in theory these animal and/or plant derived fuels should have less environmental impact in soil based on their simplified composition relative to Diesel, they pose an environmental risk like Diesel at high concentrations when disposed. The aim of the present study was to ascertain the phytotoxicity of three different plant-derived biodiesels relative to conventional Diesel. For phytotoxicological analysis, we used seeds of four crop plants, Medicago sativa, Lactuca sativa, Raphanus sativus, and Triticum aestivum to analyze the germination of seeds in contaminated soil samples. The toxicological experiment was conducted with two different soil textures: sandy loam soil and silt loam soil. The studied plant-based biodiesels were safflower methyl-ester, castor methyl ester, and castor ethyl-ester. Biodiesel toxicity was more evident at high concentrations, affecting the germination and survival of small-seeded plants to a greater extent. Tolerance of plants to the biodiesels varied between plant species and soil textures. With the exception of R. sativus, all plant species were affected and exhibited some sensitivity to the fuels, such as delayed seedling emergence and slow germination (average=10 days) at high soil concentrations (0.85% for Diesel and 1.76% for the biodiesels). Tolerance of plants to soil contamination had a species-specific nature, and on average, decreased in the following order: Raphanus sativus (0-20%)>Triticum aestivum (10-40%) ≥ Medicago sativa> Lactuca sativa (80-100%). Thus, we conclude that there is some phytotoxicity associated with plant-based biodiesels. Further

  2. Genetic diversity and population structure of castor (Ricinus communis L.) germplasm within the U.S. collection assessed with EST-SSR markers

    Science.gov (United States)

    Castor is an important oilseed crop and although its oil is inedible, it has multiple industrial and pharmaceutical applications. The entire U.S. castor germplasm collection was previously screened for oil content and fatty acid composition, but its genetic diversity and population structure has not...

  3. Castor diacylglycerol acyltransferase type1(DGAT1)displays greater activity with diricinolein than Arabidopsis DGAT1

    Science.gov (United States)

    Castor oil contains the hydroxy fatty acid ricinoleate as a major (90%) component. The diacylglycerol acyltransferase (DGAT) carries out the final reaction step in the biosynthesis of triacylglycerol, the principal constituent of seed oil, and has been considered to be the step that controls the oil...

  4. Produção e composição química do leite de cabras mestiças Moxotó sob suplementação com óleo de licuri ou de mamona Production and chemical composition of the milk from crossbred Moxotó goats supplemented with licuri or castor oil

    Directory of Open Access Journals (Sweden)

    Rita de Cássia Ramos do Egypto Queiroga

    2010-01-01

    Full Text Available Avaliou-se o efeito da inclusão de óleos de licuri ou de mamona na dieta sobre a produção, a composição química do leite de cabras leiteiras e a viabilidade econômica dessas dietas. No delineamento experimental foram utilizadas cabras Mestiças Moxotó distribuídas em quadrado latino 5 × 5 com duas repetições, composto de cinco dietas: uma controle, sem lipídio suplementar, e as demais com 3% ou 5% de óleo de licuri ou de mamona. A suplementação com 5% de óleo de licuri reduziu a produção de leite, mas não influenciou a produção de leite corrigida para 4% de gordura. A adição de 3% de óleo de mamona reduziu o teor de gordura e de sólidos totais em comparação ao óleo de licuri, aumentando o teor de lactose. O teor de proteína do leite, no entanto, não foi alterado pela adição de óleo na dieta. Os indicadores econômicos apontaram a dieta controle como a mais rentável, no entanto, a suplementação com 3% de óleo de licuri, em comparação ao de mamona, pode ser interessante quando o leite se destina ao processamento, em virtude do maior teor de gordura.The effect was assessed of including licuri and castor oils in the diet on the production and chemical composition of milk from goats and the economic viability of the diets. Crossbred Moxotó goats in a 5 × 5 Latin square design were used with two replications consisting of five diets: a control treatment without supplementary oil (control, and the others with 3% or 5% licuri or castor oil. Milk production decreased with the inclusion of 5% licuri oil, but it did not influence the production of milk corrected to 4% fat. The addition of 3% castor oil reduced the fat content and total solids production compared to licuri oil, but it increased the lactose content. There was no significant difference in the protein content among treatments. The simple financial analyses showed that the control diet was more profitable, but supplementation with 3% licuri oil when

  5. Development status of the experimental and numerical load analysis of package units CASTOR {sup registered} under drop test conditions; Entwicklungsstand in der experimentellen und numerischen Beanspruchungsanalyse von Versandstuecken der Bauart CASTOR {sup registered} unter Fallpruefbedingungen

    Energy Technology Data Exchange (ETDEWEB)

    Voelzer, Walter; Schaefer, Marc; Rumanus, Erkan; Liedtke, Ralph [Gesellschaft fuer Nuklear-Service mbH (Germany); Brehmer, Frank [ITB GmbH (Germany)

    2012-11-01

    The mechanical integrity of package units CASTOR {sup registered} for a 9-m drop test under accident conditions has to be demonstrated according the requirements of IAEA among others. For reduction of the loads the containers have to be equipped with shock absorbers on the bottom and top sides. The determination of loads under drop test conditions can be performed with experimental or numerical methods. Due to the complexity of the load state and the verification of results both methods are usually used for integrity demonstration. The numerical codes have to model the short-term dynamic behavior of the whole container for different drop orientations and temperatures, local stress states have to be quantifiable for assessment. One of the problems is the modeling of the material behavior of wood that is used in the shock absorbers. The so far used energetic calculation approach will be replaced by a dynamic approach, the numerical models will have to be verified by experimental drop tests.

  6. Development of the gaharu oil quality control

    International Nuclear Information System (INIS)

    Chong Saw Peng; Mohd Fajri Osman; Shyful Azizi Abdul Rahman; Khairuddin Abdul Rahim; Mat Rasol Awang

    2010-01-01

    Gaharu (Agar wood) is a secondary metabolite produces by the Aquilaria spp. and accumulates in the plant cell in oleoresin form. The essential oil known as gaharu oil can be extracted from this oleoresin gaharu via varies extraction method such as the water distillation, solvent extraction, pressurize extraction and etc. The gaharu oil extracted through different methods will give different fragrances. Besides, different source of materials will also give different in chemical profiles. In gaharu oil trading market, most of the buyers request quality assurance from the gaharu oil manufacturer to assure the gaharu oil purchased meets their standard requirement. Since there is a demand on gaharu oil quality assurance then it become a need to develop the gaharu oil quality control method in order to have a standard quality control of gaharu oil presented in a certificate of analysis and verified by laboratory. (author)

  7. Bahrain oil and development 1929-1989

    International Nuclear Information System (INIS)

    Clarke, A.

    1990-01-01

    This book describes the economic, political, and social elements of relations between international oil companies and Bahrain. It also provides insights into Middle East regional oil and gas development, oil pricing and production evolution, and relations between Persian Gulf states and such western powers as Great Britain and the U.S

  8. An innovative European integrated project: Castor-CO2 from capture to storage

    NARCIS (Netherlands)

    Thiez, P.L.; Mosditchian, G.; Torp, T.; Feron, P.; Ritsema, I.; Zweigel, P.; Lindeberg, E.

    2005-01-01

    This chapter gives an overview of the CASTOR (CO2, from Capture to Storage) R and D project, funded by the European Union (EU) under the 6th Framework Program. With a partnership involving Industry and Research organizations, CASTOR aims at developing new technologies for post-combustion capture and

  9. Variations in seed traits of castor ( Ricinus communis ) accessions ...

    African Journals Online (AJOL)

    The physicochemical analysis showed that castor seed and oil had saponification value of 182.9 mg/g, moisture content of 4.4%, acid value of 3.085 mg/g, viscosity of 110.41 cP, pH of 6.11, iodine value of 8.46 mg/g, specific gravity of 0.962 and refractive index of 1.477˚C. The proximate analysis showed that moisture ...

  10. Japan's involvement in oil sands development

    International Nuclear Information System (INIS)

    Sugiura, T.

    1994-01-01

    According to Japanese national policy, exploration and development by Japanese companies in overseas countries are promoted in order to ensure stable oil supplies. Japan Canada Oil Sands Limited (JACOS), part of the JAPEX group, was established during the 1978 world oil crisis to explore and develop Canadian oil sand resources in accordance with Japan's national policy. The JAPEX group, including JACOS, has invested $123 million in oil sands projects in Alberta. JAPEX's first involvement in oil sands was in the Primrose Project operated by Norcen in the Cold Lake area. Five years of cyclic steam stimulation pilot tests did not produce sufficiently good results to justify further operation. The second involvement was the PCEJ Project, a joint effort by four companies that are participating in a bitumen recovery test project in the Athabasca Deposit. JACOS holds 2,452 km 2 of oil sands leases in Alberta. Tests conducted since 1978 in the PCEJ Project include multiwell steam injection pilot tests, some of which showed promise. JACOS is also participating in steam assisted gravity drainage projects and in federal/provincial research programs. Obstacles identified in developing Alberta oil sands are the lack of a bitumen pipeline to Edmonton and the insufficient length of oil sands leases (currently 10 years), given the difficulties of oil sand development. 10 figs

  11. Louisiana's oil spill program : new developments

    International Nuclear Information System (INIS)

    Debusschere, K.; Tedford, R.; Brolin, J.; Lorentz, W.

    2000-01-01

    The Louisiana Oil Spill Coordinator's Office (LOSCO) was established to improve oil spill response, spill prevention and coordination. Louisiana is challenged with having the highest exposure of oil spills because a large portion of its economy is based on oil and gas exploration and production. LOSCO will find ways to minimize the risk of unauthorized oil spills and will address damage assessment and restoration efforts. The aging oil and gas infrastructure in Louisiana has also been recognized as a potential major source for oil spills. LOSCO locates potential spill locations and assesses the risks associated with the sites, some of which are 100 years old. LOSCO also initiated the following two programs: (1) the Abandoned Barge Program initiated in 1993 to remove abandoned barges that pose a high risk for oil discharge, and (2) the Abandoned Non-Hazardous Oil Waste (NOW) Pit and Facility Program initiated in 1992 to locate and remove structures, pits and wells that pose a risk for oil spills. About 25,000 facilities, pits, sumps and reservoirs have been inventoried and evaluated to determine if they pose a risk to human health or the environment. The Louisiana Oil Spill Prevention and Response Act (OSPRA) of 1991 allocates up to $2 million per year for the abatement of oil spills from abandoned facilities in Louisiana. The state legislature has also created the Applied and Educational Oil Spill Research and Development Program (OSRADP) to fund oil spill research. Since 1993, OSRADP has granted 68 awards in support of 42 projects, many of which focused on recovery and cleanup methods including in-situ burning, fate and effect of oil in Louisiana environments, bioremediation, phytoremediation, composting, chemical cleaners, dispersants, sorbents, and solidifiers. 3 refs., 1 tab

  12. LHCD experiments on tokamak CASTOR

    International Nuclear Information System (INIS)

    Zacek, F.; Badalec, J.; Jakubka, J.; Kryska, L.; Preinhaelter, J.; Stoeckel, J.; Valovic, M.; Nanobashvili, S.; Weixelbaum, L.; Wenzel, U.; Spineanu, F.; Vlad, M.

    1990-10-01

    A short survey is given of the experimental activities at the small Prague tokamak CASTOR. They concern primarily the LH current drive using multijunction waveguide grills as launching antennae. During two last years the, efforts were focused on a study of the electrostatic and magnetic fluctuations under conditions of combined inductive/LHCD regimes and of the relation of the level of these fluctuations to the anomalous particles transport in tokamak CASTOR. Results of the study are discussed in some detail. (author). 24 figs., 51 refs

  13. CASTOR: Cathode/Anode Satellite Thruster for Orbital Repositioning

    Science.gov (United States)

    Mruphy, Gloria A.

    2010-01-01

    The purpose of CASTOR (Cathode/Anode Satellite Thruster for Orbital Repositioning) satellite is to demonstrate in Low Earth Orbit (LEO) a nanosatellite that uses a Divergent Cusped Field Thruster (DCFT) to perform orbital maneuvers representative of an orbital transfer vehicle. Powered by semi-deployable solar arrays generating 165W of power, CASTOR will achieve nearly 1 km/s of velocity increment over one year. As a technology demonstration mission, success of CASTOR in LEO will pave the way for a low cost, high delta-V orbital transfer capability for small military and civilian payloads in support of Air Force and NASA missions. The educational objective is to engage graduate and undergraduate students in critical roles in the design, development, test, carrier integration and on-orbit operations of CASTOR as a supplement to their curricular activities. This program is laying the foundation for a long-term satellite construction program at MIT. The satellite is being designed as a part of AFRL's University Nanosatellite Program, which provides the funding and a framework in which student satellite teams compete for a launch to orbit. To this end, the satellite must fit within an envelope of 50cmx50cmx60cm, have a mass of less than 50kg, and meet stringent structural and other requirements. In this framework, the CASTOR team successfully completed PDR in August 2009 and CDR in April 2010 and will compete at FCR (Flight Competition Review) in January 2011. The complexity of the project requires implementation of many systems engineering techniques which allow for development of CASTOR from conception through FCR and encompass the full design, fabrication, and testing process.

  14. Poliuretanos elastoméricos obtenidos a partir de aceite de ricino y almidón de yuca original y modificado con anhídrido propiónico: síntesis, propiedades fisicoquímicas y fisicomecánicas Polyurethane elastomers from castor oil and chemically modified yucca starch: synthesis and physical-chemical, physical-mechanical and thermical properties

    Directory of Open Access Journals (Sweden)

    Manuel F. Valero

    2010-01-01

    Full Text Available Chemical modification of cassava starch was conducted through an acylation reaction by using pyridine and propionic anhydride to replace the functional groups of starch. Polyurethane elastomers were prepared using suspensions of the mixture obtained from castor oil and yucca starch that was modified by a propionic anhydride reaction. The suspensions were characterized by means of tests based on The Fourier Transform Infrared Spectroscopy and the Hydroxyl Index. The castor oil-AMP suspensions were used for the PU synthesis. The PUs were characterized by their physical-mechanical properties like tension- deformation and Shore A. hardness, thermal gravimetric analysis and swelling test. The density cross-linking of from swelling tests was determined by applying the Flory-Rehner equation.

  15. Development of Mobile Device for Oil Analysis

    Directory of Open Access Journals (Sweden)

    I. Macuzic

    2010-09-01

    Full Text Available This paper presents the results of project focused on development and practical application of mobile instrument for on-site analysis of industrial oils. For years, the implementation of the oil analysis was limited to a specialized laboratories, but the emergence of proactive maintenance concept, cause intensive development of devices and sensors that strive in direction of miniaturization, automation, performance enhancement and creation of multi-functional diagnostic systems. Proactive maintenance strategy involves continuous monitoring and control of the basic failure causes, among which oil contamination stands out as the most common, serious and generally widely accepted cause of failures in the industry. Using the sensor elements to determine the concentration of wear particles and water in oil, the prototype of mobile device for contamination control of mineral oil is developed. It meets the general and specific set of technical and technological requirements, has a favourable price and upgrade option.

  16. Oil and gas industry, exploration and development

    International Nuclear Information System (INIS)

    Appert, O.

    1998-01-01

    A consistent investment boost on exploration and development, the favourable prospects connected with technological improvement, the opening of virgin areas of exploration are all factors granting extraordinary opportunities for the oil and gas industry. However, environmental constraints relevant to emission standards and products quality are also growing and will be increasingly binding upon both oil and car industries [it

  17. Global Trends and Development Prospects for Oil and the Oil Products Market

    Directory of Open Access Journals (Sweden)

    Maria Dorozhkina

    2006-03-01

    Full Text Available This article discusses the important issue of the development of the global market of oil and oil products. It offers an overview of how this market was formed and its current status, classification, location and potential of countries in the oil and oil processing business. It analyzes the Ukrainian oil products market. The article discusses the shortcomings and strategic areas for the development of Ukraine’s oil transport system. It presents an optimum method for creating integration groups in order to develop the oil processing business in Ukraine for the future. The article considers the main trends and outlines development prospects for the global oil and oil products market.

  18. A Novel Methodology for the Synthesis of Acyloxy Castor Polyol Esters: Low Pour Point Lubricant Base Stocks.

    Science.gov (United States)

    Kamalakar, Kotte; Mahesh, Goli; Prasad, Rachapudi B N; Karuna, Mallampalli S L

    2015-01-01

    Castor oil, a non-edible oil containing hydroxyl fatty acid, ricinoleic acid (89.3 %) was chemically modified employing a two step procedure. The first step involved acylation (C(2)-C(6) alkanoic anhydrides) of -OH functionality employing a green catalyst, Kieselguhr-G and solvent free medium. The catalyst after reaction was filtered and reused several times without loss in activity. The second step is esterification of acylated castor fatty acids with branched mono alcohol, 2-ethylhexanol and polyols namely neopentyl glycol (NPG), trimethylolpropane (TMP) and pentaerythritol (PE) to obtain 16 novel base stocks. The base stocks when evaluated for different lubricant properties have shown very low pour points (-30 to -45°C) and broad viscosity ranges 20.27 cSt to 370.73 cSt, higher viscosity indices (144-171), good thermal and oxidative stabilities, and high weld load capacities suitable for multi-range industrial applications such as hydraulic fluids, metal working fluids, gear oil, forging and aviation applications. The study revealed that acylated branched mono- and polyol esters rich in monounsaturation is desirable for developing low pour point base stocks.

  19. Palm Oil Milling Wastes and Sustainable Development

    OpenAIRE

    A. C. Er; Abd. R.M. Nor; Katiman Rostam

    2011-01-01

    Problem statement: Palm oil milling generates solid wastes, effluent and gaseous emissions. The aim of this study is to assess the progress made in waste management by the Malaysian palm oil milling sector towards the path of sustainable development. Sustainable development is defined as the utilization of renewable resources in harmony with ecological systems. Inclusive in this definition is the transition from low value-added to higher value-added transformation of waste...

  20. Influência das variáveis de processo na alcoólise enzimática de óleo de mamona Evaluation of the influence of process variables on enzimatic alcoholysis of castor oil

    Directory of Open Access Journals (Sweden)

    D. Oliveira

    2004-06-01

    intermediates to produce a number of oleochemicals and fuel alternatives (biodiesel. In this work, enzymatic alcoholysis of castor bean oil with an immobilized lipase (Lipozyme IM was accomplished using n-hexane as solvent. In order to maximize the esters production a Taguchi design was adopted varying temperature, water and enzyme concentrations in the reaction media and the oil:ethanol molar ratio. The reactions were monitorated by determining the glycerol production. An empirical model was built to evaluate the influence of the process variables on the conversion and afterwards the operating conditions that maximize esters production were established.

  1. Monensin and a blend of castor oil and cashew nut shell liquid used in a high-concentrate diet abruptly fed to Nellore cattle.

    Science.gov (United States)

    Zotti, C A; Silva, A P; Carvalho, R; Marino, C T; Rodrigues, P H M; Silva, L F P; McAllister, T A; Leme, P R

    2017-09-01

    Monensin and functional oils (FO) were supplemented to a high-concentrate diet abruptly fed to 12 ruminally cannulated Zebu steers to study their effects on rumen fermentation, blood metabolites, and , , and relative population. A randomized complete block design with repeated measures over time within 2 experimental periods of 21 d each was used. Treatments were a control (CTR; with no additives), FO (included at 400 mg/kg), and monensin included at 30 mg/kg (M30) or 40 mg/kg (M40). All steers were fed the same high-concentrate basal diet, which consisted of 92.25% concentrate. The first 60 h after transition showed a treatment and hour interaction for ruminal propionate proportion ( = 0.028), and no change in acetate molar proportion ( = 0.633), rumen pH ( = 0.370), and time the rumen pH remained below 5.6 ( = 0.242) were observed. The acetate:propionate ratio decreased ( = 0.020) when monensin was fed in both concentrations (2.30 for the M30 treatment and 2.32 for the M40 treatment) compared with when the CTR was fed (2.85), without being different when the FO (2.71) treatment was fed. Only the M30 treatment did not show pH below 5.2 (P=0.047) over the 60 h after the abrupt transition. Within the entire period, DMI ( = 0.008) and mean ruminal pH ( = 0.040) as well as molar proportions of propionate ( = 0.034) and valerate ( = 0.031) had significant interactions between treatment and day. Total VFA concentration was greater ( = 0.017) for the M30 (117.36 m) and CTR treatments (115.77 m) compared with the M40 treatment (105.02 m), without being different for the FO treatment (111.55 m). Treatments did not change feed behavior parameters. Blood HCO ( = 0.006) and total carbon dioxide ( = 0.003) were greater for the M30 (27.8 and 29.3 mmol/L, respectively) and FO treatments (28.3 and 29.7 mmol/L, respectively) compared with the CTR treatment (25.7 and 26.9 mmol/L, respectively). ( protozoa genera, the greatest ( protozoa counts were observed for the CTR treatment

  2. Effect of copper on castor bean (Ricinus communis L.) growth

    Energy Technology Data Exchange (ETDEWEB)

    Chaves, Lucia Helena Garofalo; Cunha, Tassio Cavalcanti da Silva; Lima, Vinicius Mota; Cabral, Paulo Cesar Pinto; Barros Junior, Genival; Lacerda, Rogerio Dantas de [Universidade Federal de Campina Grande (UAEAg/UFCG), PB (Brazil). Unidade Academica de Engenharia Agricola

    2008-07-01

    Castor beans crop (Ricinus communis L.) is raising attention as an alternative crop for oil and biodiesel production. Despite the mineral fertilization is an important factor for increasing castor yield, few research has been made on this issue, mainly on the use de copper. In order to evaluate the effects of copper on growth of this plant an experiment was carried out in a greenhouse, in Campina Grande, Paraiba State, Brazil, from July to December 2007. The substrate for the pot plants was a 6 mm-sieved surface soil (Neossolo Quartzarenico). The experimental design was a completely randomized with three replications. The treatments were composed of five levels of Cu (0; 1; 2; 3 and 4 mg dm{sup -3}), which were applied at the time of planting. One plant of castor bean, cultivar BRS 188 - Paraguacu, was grown per pot after thinning and was irrigated whenever necessary. Data on plant height, number and length of leaves and stem diameter were measured at 21, 34, 77 and 103 days after planting. Copper levels used, in general, did not affect the plant height, stem diameter and leaf area, however they influenced the leaves and shoot biomass dry mass and the quadratic trend was the best to show the behavior of these. (author)

  3. Oil companies and village development in Nigeria

    International Nuclear Information System (INIS)

    Ikporukpo, C.O.

    1993-01-01

    The economic interest of oil companies and the oil-producing Third World countries, together with the technological handicaps and political considerations of the latter, provide the scenarios within which the two groups interact. In the early history of oil exploitation, the relationship was such that the oil companies had the final say in all matters. Furthermore, apart from the token royalty, no taxes were usually imposed on the exploration companies. The relationship between the oil companies and the host local communities, even in the developed countries, seems to be a replica of that between the companies and the host countries. There is the feeling in many of the local communities that they have gained little or nothing from petroleum exploitation. This is the case not only in the setting of a less developed country, such as Nigeria, but also in that of a developed country, such as the United States. In these communities, the adverse environment effect of oil exploitation is usually perceived as being overwhelming. (author)

  4. Oil and gas development : a northern perspective

    International Nuclear Information System (INIS)

    Doyle, M.

    1998-01-01

    The development of the oil and gas industry in the North, and in particular its impact over the years on the town of Fort Nelson, British Columbia, is discussed. Other important issues such as cultural differences, government/industry/community partnerships in community development, employment, training and workforce development, land claims, Aboriginal consultation and the consequent appearance of reverse discrimination were discussed. The environment, safety programs, drug and alcohol programs are also reviewed. All of these issues have a bearing on the further development of the oil and gas industry in the Yukon

  5. Effect of Aqueous Extract of Acacia nilotica on Microbial and Castor ...

    African Journals Online (AJOL)

    Five (5) Albino rats of both sexes weighing between (85-125g) were used for each experiment and diarrhoea was induced using Castor oil. The extract showed remarkable anti-diarrhoea activity which was dose dependent at 100, 200 and 400mg evidenced by decrease in volume of intestinal content significantly different at ...

  6. Role of oil imports in economic development

    International Nuclear Information System (INIS)

    Madduri, V.B.N.S.; Radhika, G.

    1990-01-01

    This paper reports that energy has a vital role to play in a developing economy. The process of industrialization calls for continuous increase in energy use. In general, the greater the use of energy, the higher the economy is placed in the order of developed countries. Countries with high per-capita income have a high consumption level of energy too. On a per-capita basis, energy consumed in U.S.A. is 51.7 barrels of oil equivalent per year while in India, it is 0.9 barrels of oil equivalent only. Therefore, energy consumption, industrial development and economic growth are interlinked. Energy became a significant part in the process of development. In the case of developing countries, any change in the price of oil has a negative effect on economic growth. It was stated in one of the Oil and Natural Gas Commission reports that a fivefold increase in the international price of oil, in real terms, over the past 15 years has had profound effects on balance of payments and growth prospects in developing countries

  7. Gene structure, expression pattern and interaction of Nuclear Factor-Y family in castor bean (Ricinus communis).

    Science.gov (United States)

    Wang, Yue; Xu, Wei; Chen, Zexi; Han, Bing; Haque, Mohammad E; Liu, Aizhong

    2018-03-01

    Nuclear Factor-Y transcription factors, which function in regulating seed development (including storage reservoir accumulation) and responding to abiotic stresses, were identified and characterized in castor bean. Nuclear Factor-Y (NF-Y) transcription factors in plants contain three subunits (NF-YA, NF-YB and NF-YC), and function as a heterodimer or heterotrimer complex in regulating plant growth, development and response to stresses. Castor bean (Ricinus communis, Euphorbiaceae) one of the most economically important non-edible oilseed crops, able to grow in diverse soil conditions and displays high tolerance to abiotic stresses. Due to increasing demands for its seed oils, it is necessary to elucidate the molecular mechanism underlying the regulation of growth and development. Based on the available genome data, we identified 25 RcNF-Y members including six RcNF-YAs, 12 RcNF-YBs and seven RcNF-YCs, and characterized their gene structures. Yeast two-hybrid assays confirmed the protein-protein interactions among three subunits. Using transcriptomic data from different tissues, we found that six members were highly or specifically expressed in endosperms (in particular, two LEC1-type members RcNF-YB2 and RcNF-YB12), implying their involvement in regulating seed development and storage reservoir accumulation. Further, we investigated the expression changes of RcNF-Y members in two-week-old seedlings under drought, cold, hot and salt stresses. We found that the expression levels of 20 RcNF-Y members tested were changed and three RcNF-Y members might function in response to abiotic stresses. This study is the first reported on genomic characterization of NF-Y transcription factors in the family Euphorbiaceae. Our results provide the basis for improved understanding of how NF-Y genes function in the regulation of seed development and responses to abiotic stresses in both castor bean and other plants in this family.

  8. Development of oil for lead shielded glass windows

    International Nuclear Information System (INIS)

    Antony, M.P.; Subramaniam, S.; Vasudeva Rao, P.R.

    1997-01-01

    Oil filled glass windows are used in Hot Cells for viewing purposes. Absorption of moisture and radiation can cause degradation of the oil and the degradation products will make the oil cloudy. Hence, it is necessary to replace the oil at least once in two years. The requirements of the oil were met so far by importing it from USA, Germany and France. An attempt has been made to make the oil indigenously with a view to replenish the oil in future, and also as an alternate source for oil import. The details of the development of a radiation resistant oil, its specifications and the test procedures are discussed in this report. (author)

  9. Mining whole genomes and transcriptomes of Jatropha (Jatropha curcas) and Castor bean (Ricinus communis) for NBS-LRR genes and defense response associated transcription factors.

    Science.gov (United States)

    Sood, Archit; Jaiswal, Varun; Chanumolu, Sree Krishna; Malhotra, Nikhil; Pal, Tarun; Chauhan, Rajinder Singh

    2014-11-01

    Jatropha (Jatropha curcas L.) and Castor bean (Ricinus communis) are oilseed crops of family Euphorbiaceae with the potential of producing high quality biodiesel and having industrial value. Both the bioenergy plants are becoming susceptible to various biotic stresses directly affecting the oil quality and content. No report exists as of today on analysis of Nucleotide Binding Site-Leucine Rich Repeat (NBS-LRR) gene repertoire and defense response transcription factors in both the plant species. In silico analysis of whole genomes and transcriptomes identified 47 new NBS-LRR genes in both the species and 122 and 318 defense response related transcription factors in Jatropha and Castor bean, respectively. The identified NBS-LRR genes and defense response transcription factors were mapped onto the respective genomes. Common and unique NBS-LRR genes and defense related transcription factors were identified in both the plant species. All NBS-LRR genes in both the species were characterized into Toll/interleukin-1 receptor NBS-LRRs (TNLs) and coiled-coil NBS-LRRs (CNLs), position on contigs, gene clusters and motifs and domains distribution. Transcript abundance or expression values were measured for all NBS-LRR genes and defense response transcription factors, suggesting their functional role. The current study provides a repertoire of NBS-LRR genes and transcription factors which can be used in not only dissecting the molecular basis of disease resistance phenotype but also in developing disease resistant genotypes in Jatropha and Castor bean through transgenic or molecular breeding approaches.

  10. Alternatif Pembuatan Biodiesel Melalui Transesterifikasi Minyak Castor (Ricinus communis Menggunakan Katalis Campuran Cangkang Telur Ayam dan Kaolin

    Directory of Open Access Journals (Sweden)

    Soni - Setiadji

    2017-05-01

    Full Text Available Biodiesel was produced by transesterification of castor oil (Ricinus communis using a catalyst of CaO and kaolin (CaO / kaolin had been performed. CaO was obtained from the calcination of eggshell. Castor oil is selected as biodiesel feedstock because it belongs to non-food oil and easy to cultivate. In general, the research method aims to comprise the CaO / Kaolin catalysts with a ratio of 15 mmol CaO per 1 gram of kaolin activated using impregnation method and biodiesel produced through transesterification of castor oil using the catalyst at 65 ºC for 8 hours with ratio of castor oil: methanol: catalyst (1: 15: 5% w / w. The reaction is carried out on the reflux system. The XRD analysis show the presence of silica and potassium aluminum silicate hydroxide in the catalyst. The EDS results show the catalyst-forming components CaO and silica. The FTIR analysis results show the absorption peak in the functional group forming the methyl ester compound. Based on the characterization of GC-MS, the largest methyl ester components contained in biodiesel are methyl risinoleate, methyl elaidat, methyl stearate, methyl linoleate, and methyl palmitate. The overall conversion of castor oil to methyl ester using CaO / kaolin catalyst is 97.36%. The largest component in castor oil is risinoleic acid, has been successfully converted to methyl risinoleate by 74.75%.DOI: http://dx.doi.org/10.15408/jkv.v0i0.4778

  11. Effects of Oganic and Biofertilizers on Growth Indices of Castor Bean (Ricinus communis L.

    Directory of Open Access Journals (Sweden)

    A Amin Ghafori

    2016-07-01

    Full Text Available Introduction Castor plant, Ricinus communis L. is a species of flowering plant in the spurge family; Euphorbiaceae, which contains a vast number of plants mostly native to the tropics. It belongs to a monotypic genus Ricinus. The name Ricinus is a latin word for tick. The plant is probably named because its seed has markings and a dump at the end that resemble certain ticks (NCRI, 2014. Castorbean is an industrial oil seed crop containing about 45-58 percent oil, which has tremendous application in petrochemicals, pharmaceuticals, cosmetics, textiles, chemicals, soap, leather, paints, varnishes, ink, nylon and plastic. Castor oil is traditionally associated with medicine and veterinary use in the fields of obstetrics, dermatology. It is also used as laxative. Presently, its utilization as bio-diesel has magnified its importance. Its oil does not freeze even at high altitudes and it is one the best lubricants for jet engines. This 100% castor-based product, has numerous applications in industry such as rotating glass car-wipers, ski boots fixatives, and for use in air-brake systems on trucks. Many new uses, based on the biodegradability of castor oil derived products, are expected in the future (Labalette et al., 1996. The shell of the castor bean is used as an organic termite control agent and its seed cake as manure in the soil. Medicinal plants are valuable resources in a wide range of natural resources that scientific identification, cultivation, development and proper utilization of them can have an important role in community health, employment and non-petrol exports. Quality of medicinal plants is more important than other crops. One of the most important factors determining the yield of castor bean is fertility. Integrated supply of nutrient to plants through combinations of organic and inorganic sources is becoming an increasingly important aspect of environmentally sound agriculture. Reports showed that the application of manure on bean

  12. Study on Emission and Performance of Diesel Engine Using Castor Biodiesel

    Directory of Open Access Journals (Sweden)

    Md. Saiful Islam

    2014-01-01

    performance of diesel engine using the castor biodiesel and its blend with diesel from 0% to 40% by volume. The acid-based catalyzed transesterification system was used to produce castor biodiesel and the highest yield of 82.5% was obtained under the optimized condition. The FTIR spectrum of castor biodiesel indicates the presence of C=O and C–O functional groups, which is due to the ester compound in biodiesel. The smoke emission test revealed that B40 (biodiesel blend with 40% biodiesel and 60% diesel had the least black smoke compared to the conventional diesel. Diesel engine performance test indicated that the specific fuel consumption of biodiesel blend was increased sufficiently when the blending ratio was optimized. Thus, the reduction in exhaust emissions and reduction in brake-specific fuel consumption made the blends of caster seed oil (B20 a suitable alternative fuel for diesel and could help in controlling air pollution.

  13. Poliuretana de mamona (Ricinus communis para desvio da crista tibial no cão Polyurethane resins derived from castor oil (Ricinus communis for tibial crest deviation in dogs

    Directory of Open Access Journals (Sweden)

    Patricia Popak Maria

    2004-06-01

    Full Text Available A luxação medial de patela é uma das principais afecções ortopédicas que afetam cães de raças de pequeno porte. Tendo como princípio que o desvio da crista tibial é uma das alterações anatômicas encontradas, este estudo objetivou avaliar o efeito da poliuretana de mamona (Ricinus communis aplicada em defeitos produzidos experimentalmente na porção proximal medial da tíbia de cães normais em fase de crescimento. Para isto, foram utilizados 12 cães subdivididos aleatoriamente em 3 grupos de igual número, com mesmo tratamento, mas com análise histopatológica aos 30 (GI, 60 (GII e 90 (GIII dias. O estudo constou de avaliações clínica, radiográfica, macroscópica, histopatológica, tomográfica e análise estatística. Avaliação clínica demonstrou não haver rejeição do implante. A análise radiográfica revelou intensa reação periosteal e neoformações ósseas no local da implantação. Macroscopicamente observou-se espessamento da crista tibial, neoformações ósseas e desvio lateral da crista. Os achados à microscopia óptica revelaram presença de tecido conjuntivo fibroso ao redor da poliuretana, ausência de proliferação óssea em direção ao implante e proliferação de periósteo na face medial das tíbias. A tomografia computadorizada revelou desvio lateral da crista em 11 animais e estes desvios foram estatisticamente significantes em nível de 5% por meio do teste t pareado.Medial patellar luxation is one of the most common orthopedic problems in small breeds of dogs and tibial crest deviation is a frequent accompaining anatomical abnormality. For that reason, the purpose of this study was to evaluate the behavior of castor oil derived polyurethane implants when apllied to experimental defects created on the medial side of the proximal tibia of normal puppies. Twelve dogs were randomly divided in 3 groups of 4 animals and were submitted to the same treatment. Histopathological study was performed

  14. Evaluation of castor oil-based polyurethane membranes in rat bone-marrow cell culture Avaliação de membranas à base de óleo de polímero de mamona em culturas de células de medula óssea de ratos

    Directory of Open Access Journals (Sweden)

    Sofia de Amorim Cerejo

    2011-10-01

    Full Text Available PURPOSE: To evaluate three methods to isolate rats MSCs and to analyze the potential of a castor oil polyurethane base membrane as a scaffold for MSCs. METHODS: Four male Wistar rats, aged 20-30 days were used. Bone marrow aspirates from femur and tibia were harvested using DMEM high glucose and heparin. The cell culture was performed in three different ways: direct culture and two types of density gradients. After 15 days, was made the 1st passage and analyzed cell viability with markers Hoerscht 33342 and propidium iodide. The MSCs were characterized by surface markers with the aid of flow cytometry. After this, three types of castor oil polyurethane membranes associated with the MSCs were kept on the 6-well plate for 5 days and were analyzed by optical microscopy to confirm cell aggregation and growth. RESULTS: Separation procedures 1 and 2 allowed adequate isolation of MSCs and favored cell growth with the passage being carried out at 70% confluence after 15 days in culture. The cells could not be isolated using procedure 3. When the 3 castor oil polyurethane membrane types were compared it was possible to observe that the growth of MSCs was around 80% in membrane type 3, 20% in type 2, and 10% in type 1. CONCLUSION: Both Ficoll-Hypaque densities allow isolation of rat MSCs, and especially castor oil-based membrane type 3 may be used as a scaffold for MSCs.OBJETIVO: Avaliar três formas de cultivo de células-tronco mesenquimais de ratos; e analisar o potencial do polímero de mamona na forma de membrana como arcabouço para CTMs. MÉTODOS: Foram utilizados quatro ratos machos Wistar, de 20 a 30 dias de idade. Aspirados da medula óssea do fêmur e da tíbia foram colhidos com DMEM alta glicose e heparina. As células foram isoladas de três formas diferentes: cultivo direto e com dois tipos de gradientes de densidade. Após 15 dias, foi feita a 1ª passagem e analisada a viabilidade celular com os marcadores Hoerscht 33342 e Iodeto de Prop

  15. CASTOR BEAN AND SUNFLOWER INTERCROPPING SYSTEMS IN ROW ARRANGEMENT: BIOLOGICAL EFFICIENCY

    Directory of Open Access Journals (Sweden)

    Ciro de Miranda Pinto

    2012-07-01

    Full Text Available An experiment field was carried in the agricultural seasons 2008, 2009 and 2010, with aim of studying the response of castorbean (Ricinus communis L. intercropping with sunflower (Helianthus annus L. in row arrangement in the dryland farming conditions. In addition, it was evaluated the biological efficiency of plants in intercropping systems.The design used in the experiment was randomized block with seven treatement and four replications. The treatments were represented by rows of castor oil (Ma and sunflower (Gi listed below: 1Ma:1Gi; 1Ma:2Gi; 1Ma:3Gi; 2Ma:2Gi; 2Ma:3Gi; castor and sunflower in the monoculture. The efficiency of intercropping was measured by LER, ATER, LEC, average between LER and ATER, SPI and CoR. The grain yield of castor bean and sunflower were reduced in intercropped row arrangements. The row arrangement 1Ma:2Gi showed the smallest reduction of average productivity of castor beans and sunflower in the evaluation period of the experiment. The castor bean was the dominant crop in relation to sunflower.

  16. Simultaneous allergen inactivation and detoxification of castor bean cake by treatment with calcium compounds

    International Nuclear Information System (INIS)

    Fernandes, K.V.; Deus-de-Oliveira, N.; Godoy, M.G.; Guimarães, Z.A.S.; Nascimento, V.V.; Melo, E.J.T. de; Freire, D.M.G.; Dansa-Petretski, M.; Machado, O.L.T.

    2012-01-01

    Ricinus communis L. is of great economic importance due to the oil extracted from its seeds. Castor oil has been used for pharmaceutical and industrial applications, as a lubricant or coating agent, as a component of plastic products, as a fungicide or in the synthesis of biodiesel fuels. After oil extraction, a castor cake with a large amount of protein is obtained. However, this by-product cannot be used as animal feed due to the presence of toxic (ricin) and allergenic (2S albumin) proteins. Here, we propose two processes for detoxification and allergen inactivation of the castor cake. In addition, we establish a biological test to detect ricin and validate these detoxification processes. In this test, Vero cells were treated with ricin, and cell death was assessed by cell counting and measurement of lactate dehydrogenase activity. The limit of detection of the Vero cell assay was 10 ng/mL using a concentration of 1.6 × 10 5 cells/well. Solid-state fermentation (SSF) and treatment with calcium compounds were used as cake detoxification processes. For SSF, Aspergillus niger was grown using a castor cake as a substrate, and this cake was analyzed after 24, 48, 72, and 96 h of SSF. Ricin was eliminated after 24 h of SSF treatment. The cake was treated with 4 or 8% Ca(OH) 2 or CaO, and both the toxicity and the allergenic properties were entirely abolished. A by-product free of toxicity and allergens was obtained

  17. Development of new antioxidant systems for frying oil and omega-3 oils

    Science.gov (United States)

    The development of natural antioxidant systems for frying oil will be discussed in this presentation. This study aimed to utilize vegetable oils such as soybean oil for frying, of which the United States is the world’s largest producer. To overcome the vulnerability of soybean oil to oxidation due t...

  18. Capability Development at Imperial Oil Resources Ltd.

    Science.gov (United States)

    Ellerington, David; And Others

    1992-01-01

    Striving to be learning organization, Imperial Oil of Canada focused on organizational, divisional, and individual capability development. Lessons learned include the following: (1) all levels of employees are potential professionals; (2) learning must be continuous; (3) intrinsic motivation and commitment are essential; and (4) organizational…

  19. development of motorized development of motorized oil palm fruit

    African Journals Online (AJOL)

    eobe

    industrial activity in a number of developing West. African and ... pharmaceutical industries for the manufacture of drugs. ... production line of which oil palm fruit digestion is one. Thus, one ... For effective design of the machine, it was necessary.

  20. The Development of Breakdown in Transformer Oil

    Directory of Open Access Journals (Sweden)

    Jozef Kudelcik

    2007-01-01

    Full Text Available The conditions under which breakdown of composite liquid - solid insulation can be occurred, e.g. in transformer, play an important role in designing of such insulation. The initial state of breakdown development is explained based on development of streamers in cavitations. The whole breakdown development in transformer oil is represented by RLC circuit and it depends on the parameters of outer circuit.

  1. Oil development in China: Current status and future trends

    International Nuclear Information System (INIS)

    Ma Linwei; Fu Feng; Li Zheng; Liu Pei

    2012-01-01

    The future of oil has become an important topic of the discussion of energy policy in China. This paper attempts to present a full picture of the current status and future trends of China’s oil development through system analysis. First, we map a Sankey diagram of China’s oil flow to reveal the physical pattern of China’s oil supply and consumption. Then, we present the historical and ongoing trends of China’s oil flow from key aspects such as oil demand, oil resource availability, technology improvement, and policy adjustment. Based on these understandings, we design three scenarios of China’s oil demand in 2030, and analyze policy implications for oil saving, automotive energy development, and energy security. From the analysis, we draw some conclusions for policy decisions, such as to control the total oil consumption to avoid energy security risks, to enhance oil saving in all sectors with road transportation as the emphasis, and to increase the investment on oil production and refining to secure oil supply and reduce emissions. - Highlights: ► A Sankey Diagram to reveal the physical pattern of China’s oil supply and consumption. ► Present the ongoing trends of China’s oil development. ► Discuss important policy issues such as oil saving, energy security, and emissions reduction.

  2. Castor (Ricinus communis L. and Pigweed (Amaranthus retroflexus L. Growth Indices in Terms of Interference

    Directory of Open Access Journals (Sweden)

    naser jafarzadeh

    2016-11-01

    Full Text Available Introduction Growth analysis has been widely used in breeding programs to identify the important plant developmental phases and components related to higher yield under a particular set of environmental conditions. Castor bean (Ricinus communis L. is an important commercial crop. Castor oil based by products is used in manufacturing of several commercially important commodities like surfactants, coatings, greases, pharmaceuticals, cosmetics, polyesters, polymers, etc. Interference (Interactive effects among species on inter-species populations is one of the main issues on the eco-physiology of plant populations where weeds impose negative effects by approaching the plant to compete in light, water and nutrient elements availability and results in reduced growth and yield (Shinggu et al., 2011. Growth indices are useful for interpreting plant reactions to the crop and weed density. Various reasons have been attributed for the low productivity among the most important is weed competition (Radosevich, 1987. The aim of the present experiment was evaluating the interference effects of redroot pigweed on growth indices of castor bean in northwest of Iran. Materials and methods This experiment was conducted in Urmia, Iran (Agricultural Research of West Azarbayjan, Saatlo Station (37°44´18״ N Latitude and 45° 10´ 53״ E Longitude, at 1338 m above sea level in 2012. The soil of the experimental field was sandy - loam, with pH of 7.2. Competitive pattern of experiment was in two-factor based on a randomized complete block design (RCBD with three replications arranged in four castor plant densities (3, 4, 5 and 6 plants.m-2 and four redroot pigweed densities (0, 5, 10 and 15 plants.m-2. Redroot pigweed and castor seeds were simultaneously directly planted on the 22th May in 2012. Redroot pigweed plants were weeded at the times related to the treatments level. Irrigation and intercultural operations were performed whenever necessary. Plots were 3m×5m

  3. Physicochemical characteristics of seeds from wild and cultivated castor bean plants (Ricinus communis L.

    Directory of Open Access Journals (Sweden)

    Jose Daniel Mosquera

    2018-01-01

    Full Text Available The castor (Ricinus communis L. is an oilseed plant whose main features are its drought resistance, and its adaptation to eroded, polluted, and low fertility soils. Its oil has a great demand in the industrial sector and it has recently attracted considerable interest for its use in the production of biodiesel and jet fuel. In this study, morphological, physical and chemical characterizations were performed to ascertain the quality of wild (VQ-1 and under cultivation (VQ-7 oil castor seeds. The results showed that there are differences in the morphological and physicochemical characteristics regarding oil content (44,95 vs 33,84%, ash (3,20 vs 2,42%, and 100-seed-weight (45,87 vs 54,23g; similar behavior was recorded when characterizing the oil: kinematic viscosity (269,67 vs 266,44mm2 /s, density (0,9389 vs 0,9465g/cm3 , and acidity index (0,9918 vs 0,5440mg KOH/g for VQ-1 and VQ-7, respectively. Growing conditions to which castor plants were subjected may influence both the final quality of seeds and chemical properties of the oil.

  4. Supply chain management of the castor biodiesel in the Bahia state, Brazil; Gestao da cadeia de suprimentos do biodiesel de mamona no estado da Bahia

    Energy Technology Data Exchange (ETDEWEB)

    Freires, Francisco G.M.; Goncalo, Thomas E.E.; Oliveira, Danillo R.S.B. [Universidade Federal do Vale do Sao Francisco (UNIVASF), Juazeiro, BA (Brazil)], E-mail: francisco.gaudencio@univasf.edu.br

    2009-07-01

    In front of the global trend for developing new ways of energy that pollute less and are renewable, Brazil emerges as a major actor in the development and use of technology for the production of biofuels. In the context of the potential of semi-arid to produce some oil used in production, the Brazilian government is enabling the production of Northeastern region. The State of Bahia is the largest producer of castor oil from Brazil, with an estimated production of 102.8 thousand tonnes of grain in the season 2008/2009 (CONAB, 2009). The development of the sector depends on appropriate government actions to support their competitive sustainability, and encouraging the improvement of management techniques in all involved. In that scenario, the logistics contributes to the development of this sector through the supply chain management. One conclusion is that the competitiveness and sustainability of the supply chain of castor in the Semi-arid of Bahia practices depends on the adoption of integrated logistics, without which the current failures prevent the consolidation of governmental objectives defined. (author)

  5. Oil sands and heavy oil development issues and prospects under a Liberal government

    International Nuclear Information System (INIS)

    Shiry, J.

    1993-01-01

    A short review is presented of some of the factors affecting development of the western Canadian oil sands and heavy oil deposits to the year 2000. The Alberta oil sands resource has at least 1 trillion bbl of recoverable oil. At current prices, technology is the key to reducing costs to a more economic level. Cash operating costs have halved to $15/bbl over the past decade and the oil sands companies have programs to halve that figure again. A problem is the rising cost of natural gas as a fuel, which could jeopardize further development of both oil sand and heavy oil resources. In Saskatchewan, over 25 billion bbl of heavy oil are estimated to be in place. The biggest question is what percentage can be recovered; again, technology such as horizontal wells, 3-dimensional seismic, and steam assisted recovery is playing an important role. Concerns are expressed about the intentions of the new Liberal government concerning oil sand/heavy oil development, especially on the issues of foreign investment, exports, and environmental policy. A Liberal energy policy is not likely to allow U.S. direct investment in an oil sands plant to be tied to export of production, and the energy- and emissions-intensive nature of the oil sand/heavy oil industry will tend to make environmental approvals difficult

  6. Geology and development of oil fields in Western Siberia

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    The anthology is dedicated to the geology, geophysics, hydrodynamics, and development of oil fields in Western Siberia. The articles on geological, industrial-geophysical and theoretical mathematical studies make recommendations and suggest measures to improve procedures for calculating oil reserves, to increase development efficiency and raise oil output.

  7. Mitigation of Oil in Water Column: Concept Development

    Science.gov (United States)

    2016-06-01

    subsea pipeline leaks , or the leaking of oil from tanks after a damaged vessel has sunk to the bottom. Oil arriving at the surface of the water may...i Classification | CG-926 RDC | author | audience | month year Mitigation of Oil in Water Column: Concept Development Distribution...Center. June 2016 Report No. CG-D-03-16 Mitigation of Oil in Water Column: Concept Development ii UNCLAS//Public | CG-926 RDC

  8. Potential Development Essential Oil Production of Central Java, Indonesia

    Science.gov (United States)

    Alighiri, D.; Eden, W. T.; Supardi, K. I.; Masturi; Purwinarko, A.

    2017-04-01

    Indonesia is the source of raw essential oil in the world. Essential oils are used in various types of industries such as food and beverage, flavour, fragrance, perfumery, pharmaceuticals, and cosmetics. However, the development of Indonesian essential oil industry has not been encouraging for the production of essential oils, further it is unable to meet global demand. Besides that, the quality of volatile oil resulted cannot meet the international market standards. Based on the facts, the potential of Indonesian essential oils needs to be developed to provide added value, through increased production, improved quality and product diversification. One part of Indonesia having abundant of raw essential oil source is Central Java. Central Java has the quite large potential production of essential oils. Some essential oils produced from refining industry owned by the government, private and community sectors include cananga oils (Boyolali district), clove oils (Semarang district), patchouli oils (Brebes district, Pemalang district, and Klaten district). The main problem in the development of plants industries that producing essential oil in Central Java is low crops production, farming properties, quality of essential oils are diverse, providing poor-quality products and volatile oil price fluctuations. Marketing constraints of Central Java essential oils are quite complex supply chain. In general, marketing constraints of essential oils due to three factors, namely the low quality due to type of essential oil business that generally shaped small businesses with different capital and technology, domestic marketing is still a buyer-market (price determined by the buyer) because of weak bargaining position processors businessman, and prices fluctuate (domestic and foreign) due to uncontrolled domestic production and inter-country competition among manufacturers.

  9. Development of a bank for ultrasonic characterization of olive oil

    International Nuclear Information System (INIS)

    Sabra Gemayel, M.N.; Zaatar, Y.; Zaouk, D.; El Hajj, A.; Honein, E.; Assaad, J.

    2015-01-01

    Olive oil has long been renowned for its nutritional and healthy values. These values are being continuously verified by new scientific results. Not all olive oils found in the market are, however,authentic. One of the ways to cheat in olive oil is to mix it with other, cheaper oils. The aim of our study is to develop an ultrasonic measurement system that would quickly detect the fraud in the olive oil and thus protect and preserve this quality product. By using ultrasonic waves of frequency 1.7MHz in transmission through the oils, we have obtained promising results for detection of different mixtures of olive oil with pure sunflower oil. Our results have shown an increasing ultrasonic speed for an increasing percentage of sunflower oil in the mixture. (author)

  10. Use of castor oil polyurethane in an alternative technique for medial patella surgical correction in dogs Utilização do poliuretano de mamona em técnica alternativa de correção cirúrgica da luxação medial de patela em cães

    Directory of Open Access Journals (Sweden)

    Fabrício de Oliveira Frazilio

    2006-01-01

    Full Text Available PURPOSE: Comparative morphologic study of utilization of castor oil polymer in dogs joints, as an alternative technique to autogenous graft, in surgical correction of medial patella luxation. METHODS:Twelve adult dogs, of both sexes, were randomly allocated to two different groups of six animals each. Group I (biopolymer consisted of the deepening of the right femoral troclea, with the implantation of the biopolymer prothesis, and compared to group II (control which consisted of the conventional trocleoplastia technique with wedged cut of the left femoral troclea. The dogs were sacrified after 30 or 90 days and the anathomic peaces were analyzed macro and microscopically. Qui square and Wilcoxon tests were used for the statistic analyses of the results, considering probability of 5%. RESULTS: It was not observed bony integration on the castor oil polymer group. There was resorption of the graft along experimental period and absence of inflammatory cells in the studied periods. CONCLUSION: Castor oil polymer assisted cicatrisation process, was biocompatible without inflammation, and it can be used in joints as an alternative for bony filling.OBJETIVO: Estudo morfológico do implante da prótese de polímero de mamona em articulações de cães, como técnica alternativa ao enxerto ósseo autógeno na correção cirúrgica da luxação medial de patela. MÉTODOS: Doze cães adultos, de ambos os sexos, foram distribuídos aleatoriamente em dois grupos de 6 animais. No grupo I (poliuretano foi feito o aprofundamento da tróclea femoral direita com prótese de polímero de mamona, que foi comparado com o grupo II (controle sendo feita a trocleoplastia por ressecção em cunha da tróclea femoral esquerda. Os animais foram sacrificados após 30 e 90 dias e as peças anatômicas foram avaliadas macro e microscopicamente. O teste do quiquadrado e o teste não-paramétrico de Wilcoxon foram utilizados para a análise estatística dos resultados. Fixou

  11. Organic matter and soil water content influence on BRS 188 castor bean growth

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda, Rogerio Dantas de; Araujo, Ester Luiz de; Nascimento, Elka Costa Santos; Barros Junior, Genival [Universidade Federal de Campina Grande (UFCG), PB (Brazil); Guerra, Hugo O. Carvallo; Chaves, Lucia Helena G. [Universidade Federal de Campina Grande (UAEAg/UFCG), PB (Brazil). Unidade Academica de Engenharia Agricola

    2008-07-01

    The castor bean culture has been highlighted due to the several applications of its oil, which constitutes one of the best row materials for biodiesel manufacturing, and the base for several other industrial products. The objective of the present work was to study the effect of different soil water and soil organic matter on the castor bean growth. The experiment was conducted from April to August 2006 under greenhouse conditions using a randomized block 2x4 factorial design with two soil organic mater content (5.0 g.kg{sup -1} e 25.0 g.kg{sup -1}), four levels of available water (100, 90, 80 e 70% ) and three replicates. For this, 24 plastic containers, 75 kg capacity, were used on which was grown one plant 120 days after the seedling. At regular intervals the plant height was measured and the results analyzed statistically. For the qualitative treatments (with and without organic matter) the treatment means were compared through the Tukey test. For the quantitative ones (water levels) were used regressions. The castor bean cultivar height was significantly influenced by the organic matter content only after 80 days. Castor bean height increased significantly with the soil water content after 40 days of growing. (author)

  12. Differential Contribution of Malic Enzymes during Soybean and Castor Seeds Maturation.

    Directory of Open Access Journals (Sweden)

    Mariel Claudia Gerrard Wheeler

    Full Text Available Malic enzymes (ME catalyze the decarboxylation of malate generating pyruvate, CO2 and NADH or NADPH. In some organisms it has been established that ME is involved in lipids biosynthesis supplying carbon skeletons and reducing power. In this work we studied the MEs of soybean and castor, metabolically different oilseeds. The comparison of enzymatic activities, transcript profiles and organic acid contents suggest different metabolic strategies operating in soybean embryo and castor endosperm in order to generate precursors for lipid biosynthesis. In castor, the malate accumulation pattern agrees with a central role of this metabolite in the provision of carbon to plastids, where the biosynthesis of fatty acids occurs. In this regard, the genome of castor possesses a single gene encoding a putative plastidic NADP-ME, whose expression level is high when lipid deposition is active. On the other hand, NAD-ME showed an important contribution to the maturation of soybean embryos, perhaps driving the carbon relocation from mitochondria to plastids to support the fatty acids synthesis in the last stages of seed filling. These findings provide new insights into intermediary metabolism in oilseeds and provide new biotechnological targets to improve oil yields.

  13. Ecuador steps up pace of oil development activity

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that oil companies operating in Ecuador plan to quicken the pace of oil development this year. After delays in 1991, companies plan a series of projects to develop reserves discovered the past 3 years estimated at more than 600 million bbl. Oil and Gas Journal estimated Ecuador's proved crude reserves at 1.55 billion bbl as of Jan. 1, 1992. The development push is part of a larger effort needed to ensure Ecuador's status as an oil exporter into the next century. Ecuador is the smallest crude oil producer and exporter in the Organization of Petroleum Exporting Countries

  14. Prospects of castor (Ricinus communis L.) genotypes for biodiesel production in India

    International Nuclear Information System (INIS)

    Lavanya, C.; Murthy, I.Y.L.N.; Nagaraj, G.; Mukta, N.

    2012-01-01

    The search for suitable non-edible oilseed crops for production of biodiesel has led to exploration of the potential of castor, hitherto an export oriented commercial oilseed crop in India. In this context, a study was conducted to identify high yielding castor genotypes ideal for biodiesel production. The material evaluated included seed of 15 castor genotypes grown in rainfed conditions of Alfisols at Hyderabad, India. Variability for palmitic, stearic, oleic, linoleic fatty acids was recorded. Ricinoleic acid, the predominant mono unsaturated fatty acid varied among castor genotypes from 86.7 to 92.1%. Correlation coeffecients between fatty acid profile and biodiesel traits were computed. Genotypes 48-1 and DCH-200 exhibited high O/L ratio, low Iodine value (IV) and high cetane number (CN) which indicates higher stability, longer shelf life, quick ignition and greater combustion quality. Genotype DPC-9 exhibited potential as a female parent for development of biodiesel suitable hybrid. -- Highlights: ► Evaluated 15 castor genotypes for fatty acid profile. ► Computed biodiesel related traits like saponification number, iodine value and cetane number. ► Ricinoleic acid, the predominant mono unsaturated fatty acid ranged from 86.7 to 92.1%. ► Variety 48-1 and hybrid DCH-200 exhibited high O/L ratio, low iodine value (IV) and high cetane number (CN).

  15. Development of Bottom Oil Recovery Systems. Revised

    Science.gov (United States)

    2014-02-01

    ahead of the filtration process. Stage 6 Disposal: Collection of oil , oiled debris, and decontaminated sand/sediments. 7 NET ENVIRONMENTAL BENEFIT......Sea HFO / 10.7 X 1983 T/V Hanon Jade Yosu, South Korea Heavy Arabian Crude Oil X (salt) ( burn residue) 1984 T/V Alvenus Louisiana Merey

  16. 2003 Castor seminar - 120 tons of high technology for safety

    International Nuclear Information System (INIS)

    Anon.

    2003-01-01

    Castor (Cask for Storage and Transport of Radioactive Material) has become a symbol of the pros and cons of nuclear power in the public debate. Actually, what is Castor, and what is the technology behind this name? Siempelkamp Nukleartechnik and the Gesellschaft fuer Nuklearbehaelter mbH (GNB) invited interested parties to a presentation of the concept, technology, and manufacture on the occasion of the 2003 Castor Seminar. There was the possibility, among other events, to attend the casting process of a Castor cask at the Krefeld foundry of Siempelkamp. GNB offered a visit to its Muelheim works where the final assembly of the Castor cask could be observed. (orig.)

  17. Tape write-efficiency improvements in CASTOR

    International Nuclear Information System (INIS)

    Murray, S; Bahyl, V; Cancio, G; Cano, E; Lo Presti, G; Lo Re, G; Ponce, S; Kotlyar, V

    2012-01-01

    The CERN Advanced STORage manager (CASTOR) is used to archive to tape the physics data of past and present physics experiments. For reasons of physical storage space, all of the tape resident data in CASTOR are repacked onto higher density tapes approximately every two years. Improving the performance of writing files smaller than 2GB to tape is essential in order to keep the time needed to repack all of the tape resident data within a period of no more than 1 year. This paper reports on the solution to writing efficiently to tape that is currently in its early deployment phases at CERN.

  18. Developing new markets for oil sands products

    International Nuclear Information System (INIS)

    Crandall, G.

    2004-01-01

    This paper presents a review by Purvin and Gertz of western Canadian crude oil supply. This energy consulting firm provides advise to the energy sector. It suggests that oil sands production will surpass declining conventional production. Oil sands supply includes bitumen, synthetic crude oil (SCO), and diluent. It is forecasted that oil sands will increase from 42 per cent of western supply in 2002 to 78 per cent in 2015. The potential of Alberta's oil sands was discussed along with a recent study of refined products and petrochemicals from bitumen. Upgrading, refining and petrochemical case studies were presented. The author examined if a Canadian oil sands upgrading project with high capital costs can be competitive with competing projects in the United States and internationally. In addition to supply and demand issues, the presentation examined infrastructure capability and market potential in the United States. The economic potential and risks of preferred business cases compared to upgrading to SCO were also evaluated. 15 figs

  19. Adição de torta de mamona em substratos na aclimatação de mudas micropropagadas de bananeira Effect of addition of castor bean pie in substrates in acclimatization of micropropagated banana plantlets

    Directory of Open Access Journals (Sweden)

    Adriana Novais Martins

    2011-03-01

    Full Text Available A utilização de mudas micropropagadas de bananeira que oferecem qualidade genética e fitossanitária, favorecendo o desenvolvimento, instalação e uniformidade do pomar, é importante para a exploração comercial da bananicultura. O objetivo deste trabalho foi avaliar a influência da adição da torta de mamona nos substratos na aclimatação de mudas micropropagadas de bananeira da cv. Willians. O delineamento estatístico utilizado foi o inteiramente casualizado, com 10 tratamentos, sendo 2 substratos e 5 dosagens de torta de mamona (0; 6; 12; 18 e 24 g vaso-1. O substrato Vivatto Slim Plus® possibilitou o melhor desenvolvimento das plantas na aclimatação. Não são recomendadas doses superiores a 12 g planta-1 de torta de mamona misturadas ao substrato na aclimatação de mudas de bananeira.The use of micropropagated banana tree seedlings offer genetic and phytosanitary qualities, favoring the development, installation and uniformity of the yield and it is very important for the commercial exploration of banana fruits. The objective of this study was to evaluate the influence of castor oil plant pie added to the substrate in the acclimatization of micropropagated banana plantlets cv. 'Willians'. It was use the completely randomized, with 10 treatments, being 2 substrates and 5 dosages of castor oil plant pie (0; 6; 12; 18 and 24 g for each recipient. The substrate Vivatto Slim Plus® showed the best development of the plants in acclimatization processes. Dosages above 12 g of castor oil plant pie for each plant are not recommended mixed to the substrate in the acclimatization of banana tree seedlings

  20. Simultaneous allergen inactivation and detoxification of castor bean cake by treatment with calcium compounds

    Directory of Open Access Journals (Sweden)

    K.V. Fernandes

    2012-11-01

    Full Text Available Ricinus communis L. is of great economic importance due to the oil extracted from its seeds. Castor oil has been used for pharmaceutical and industrial applications, as a lubricant or coating agent, as a component of plastic products, as a fungicide or in the synthesis of biodiesel fuels. After oil extraction, a castor cake with a large amount of protein is obtained. However, this by-product cannot be used as animal feed due to the presence of toxic (ricin and allergenic (2S albumin proteins. Here, we propose two processes for detoxification and allergen inactivation of the castor cake. In addition, we establish a biological test to detect ricin and validate these detoxification processes. In this test, Vero cells were treated with ricin, and cell death was assessed by cell counting and measurement of lactate dehydrogenase activity. The limit of detection of the Vero cell assay was 10 ng/mL using a concentration of 1.6 x 10(5 cells/well. Solid-state fermentation (SSF and treatment with calcium compounds were used as cake detoxification processes. For SSF, Aspergillus niger was grown using a castor cake as a substrate, and this cake was analyzed after 24, 48, 72, and 96 h of SSF. Ricin was eliminated after 24 h of SSF treatment. The cake was treated with 4 or 8% Ca(OH2 or CaO, and both the toxicity and the allergenic properties were entirely abolished. A by-product free of toxicity and allergens was obtained.

  1. Simultaneous allergen inactivation and detoxification of castor bean cake by treatment with calcium compounds

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, K.V.; Deus-de-Oliveira, N. [Laboratório de Química e Função de Proteínas e Peptídeos, Centro de Biociências e Biotecnologia, Universidade Estadual do Norte Fluminense Darcy Ribeiro, Rio de Janeiro, RJ (Brazil); Godoy, M.G. [Laboratório de Biotecnologia Microbiana, Instituto de Química, Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ (Brazil); Guimarães, Z.A.S. [Laboratório de Biologia Celular e Tecidual, Centro de Biociências e Biotecnologia, Universidade Estadual do Norte Fluminense Darcy Ribeiro, Rio de Janeiro, RJ (Brazil); Nascimento, V.V. [Laboratório de Química e Função de Proteínas e Peptídeos, Centro de Biociências e Biotecnologia, Universidade Estadual do Norte Fluminense Darcy Ribeiro, Rio de Janeiro, RJ (Brazil); Melo, E.J.T. de [Laboratório de Biologia Celular e Tecidual, Centro de Biociências e Biotecnologia, Universidade Estadual do Norte Fluminense Darcy Ribeiro, Rio de Janeiro, RJ (Brazil); Freire, D.M.G. [Laboratório de Biotecnologia Microbiana, Instituto de Química, Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ (Brazil); Dansa-Petretski, M.; Machado, O.L.T. [Laboratório de Química e Função de Proteínas e Peptídeos, Centro de Biociências e Biotecnologia, Universidade Estadual do Norte Fluminense Darcy Ribeiro, Rio de Janeiro, RJ (Brazil)

    2012-08-24

    Ricinus communis L. is of great economic importance due to the oil extracted from its seeds. Castor oil has been used for pharmaceutical and industrial applications, as a lubricant or coating agent, as a component of plastic products, as a fungicide or in the synthesis of biodiesel fuels. After oil extraction, a castor cake with a large amount of protein is obtained. However, this by-product cannot be used as animal feed due to the presence of toxic (ricin) and allergenic (2S albumin) proteins. Here, we propose two processes for detoxification and allergen inactivation of the castor cake. In addition, we establish a biological test to detect ricin and validate these detoxification processes. In this test, Vero cells were treated with ricin, and cell death was assessed by cell counting and measurement of lactate dehydrogenase activity. The limit of detection of the Vero cell assay was 10 ng/mL using a concentration of 1.6 × 10{sup 5} cells/well. Solid-state fermentation (SSF) and treatment with calcium compounds were used as cake detoxification processes. For SSF, Aspergillus niger was grown using a castor cake as a substrate, and this cake was analyzed after 24, 48, 72, and 96 h of SSF. Ricin was eliminated after 24 h of SSF treatment. The cake was treated with 4 or 8% Ca(OH){sub 2} or CaO, and both the toxicity and the allergenic properties were entirely abolished. A by-product free of toxicity and allergens was obtained.

  2. Catalysts development for Venezuelan oil industry

    International Nuclear Information System (INIS)

    1999-01-01

    Since the beginning of technical activities at PDVSA Intevep, Catalysis became a fact. As the technological affiliate of the Venezuelan Oil Industry, its rol in this area has been oriented towards the refining and petrochemical needs of that industry. In doing so, the whole set of activities dealing with basic research, development and consulting has lead to keep in force such a topic along our history. This work describes these activities, the infrastructure which supported it and the most relevant results, both those which have reached commercial level together with those holding that potential through a valid patent. As can be seen, this country relay on a corporation capable of generating catalytic technologies to satisfy its needs, within a wide range of applications. PDVSA Intevep has been exhaustively working with that orientation from the knowledge creation through the technology transfer of our products to the operational units

  3. Oil for development initiative annual report 2010

    International Nuclear Information System (INIS)

    2011-01-01

    In 2010, Oil for Development continued to develop its role as a key actor within the field of petroleum related development assistance. Five years after the programme started, we experience a steady demand for our product, which is to provide advice and competence building within petroleum sector management. Our cooperating partners are government agencies and to a lesser extent civil society organizations and parliamentary committees.Main trends in 2010 include the following: OfD continued to be a high priority programme in Norwegian development cooperation. The budget spending was Nok 222 million, 15 million higher than in 2009. The programme provided tailor made assistance to more than 20 countries, taking a holistic approach towards petroleum sector management. This implies that resource management, revenue management and environmental management are addressed in a coordinated manner, and that principles of good governance, such as anti-corruption, transparency and accountability, are cross-cutting. The funding for regional initiatives and South-South cooperation was doubled. (au)

  4. Oil for development initiative annual report 2010

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    In 2010, Oil for Development continued to develop its role as a key actor within the field of petroleum related development assistance. Five years after the programme started, we experience a steady demand for our product, which is to provide advice and competence building within petroleum sector management. Our cooperating partners are government agencies and to a lesser extent civil society organizations and parliamentary committees.Main trends in 2010 include the following: OfD continued to be a high priority programme in Norwegian development cooperation. The budget spending was Nok 222 million, 15 million higher than in 2009. The programme provided tailor made assistance to more than 20 countries, taking a holistic approach towards petroleum sector management. This implies that resource management, revenue management and environmental management are addressed in a coordinated manner, and that principles of good governance, such as anti-corruption, transparency and accountability, are cross-cutting. The funding for regional initiatives and South-South cooperation was doubled. (au)

  5. Non oil exports finance and economic development in Saudi Arabia

    OpenAIRE

    Alsakran, Abdullah

    2014-01-01

    This thesis was submitted for the degree of Doctor of Philosophy and awarded by Brunel University Oil is an important part of the Saudi economy. With the volatility of oil prices and the pressing needs of economic growth and development, the Saudi Arabian government has planned to diversify its sources of income. To this end, the majority of effort has focused on developing the non-oil export sectors, particularly in manufacturing. Despite government efforts to enhance the ratio of non-...

  6. Oil sands: Strategies for future development - An overview

    International Nuclear Information System (INIS)

    Yildirim, E.

    1995-01-01

    The Alberta Chamber of Resources developed a Task Force in 1993 to promote oil sands development, and to identify and publicize the social and economic benefits of oil sands operations. Formation, mission of the National Task Force, impediments and opportunities for development were summarized. Attributes of oil sands, benefits of their development, impediments to development, strategic development and potential growth scenarios were discussed. Cooperation between government and industry was deemed essential. Recommendations included development of a bitumen pipeline network, provision of incentives to encourage development, encouragement of risk and reward sharing between bitumen producers and up graders, and diversification of products and by-products. 7 figs., 12 refs

  7. Sustainable Development - An Oil Industry View

    Energy Technology Data Exchange (ETDEWEB)

    Langcake, Peter [Shell International BV, (Netherlands)

    1997-12-31

    For Shell companies, according to this presentation, sustainable development is an umbrella concept that they have been dealing with for many years and that has recently been given increased focus. Over the years, concern about the depletion of non-renewable resources has been overshadowed by concern about the depletion of renewable sources such as fisheries, forests etc. and climate changes. The primary contribution that Shell can make to sustainable development now and in the foreseeable future is in the economic sphere. Some examples of the involvement of Shell are given: (1) Shell companies have for many years invested considerably in forestry projects and recently some have developed businesses in biomass to power generation projects. Some have projects in photovoltaics. (2) In the Camisea project in Peru, a Shell company is putting the sustainability principle to work by integrating economic, environmental and social aspects. Two large oil reserves lie on either side of the Camisea River. The area is home to several indigenous peoples; it borders a national park and is rich in biodiversity. (3) In Malaysia, Shell is exploiting rich offshore gas fields. These projects are examples of technology cooperation and capability building that contribute to Malaysia`s plans for becoming fully industrialized by 2020

  8. Growing markets to sustain oil sands development

    International Nuclear Information System (INIS)

    Wise, T.H.

    2003-01-01

    The utilization of Alberta bitumen for the clean fuels market depends on upgrading, transportation, and refining processes. Forecasts show that oil sands production, which includes synthetic crude oil (SCO), will surpass declining conventional production in Western Canada. Several issues pose a challenge to the oil sands processing industry. The producers' market is affected by crude oil prices, market expansion options, diluent availability/cost, supply cost competitiveness, and regional processing. The common market issues include light/heavy crude prices, oil sands crude qualities, prices of oil sands crudes, pipeline infrastructure, and competitive supplies. The issues facing the refiners are: refining margins, security of crude supply, refined product quality, and competitive product supply. A brief review of markets for Canadian crude oil, including synthetic crude, was provided. The share of the Midwest market by Alberta must be retained and increased. The market expansion options were reviewed for both downstream (refining) and upstream (upgrading) operations. To reach more distant markets such as Southern Midwest, Washington, and California, new pipeline capacity would be required. The market is nearly saturated for Canada's heavy oil supply. More upgrading will be required as bitumen production increases. Market growth is still possible for Canada's SCO but according to forecasts, the market could also become saturated. To increase demand and allow supplies to grow, SCO prices may fall below light crude prices. It was noted that a balance must be achieved in order for producers to increase production and for refiner/upgraders to expand their conversion capacity. tabs., figs

  9. Development of penetrant materials from used oil

    International Nuclear Information System (INIS)

    Mohamad Pauzi Ismail; Azhar Azmi

    2014-01-01

    This paper described the results of experiment to produce penetrant for nondestructive testing using used engine oil. The used engine oil was obtained from motor vehicle. It was mixed with kerosene at several mix proportion. The penetrability of these mixing were measured and compared with the penetrant available on the market. The results of measurement were explained and discussed. (author)

  10. Control of coffee berry borer, Hypothenemus hampei (Ferrari (Coleoptera: Curculionidae: Scolytinae with botanical insecticides and mineral oils

    Directory of Open Access Journals (Sweden)

    Flávio Neves Celestino

    2016-01-01

    Full Text Available The objective of this study was to evaluate botanical oils, mineral oils and an insecticide that contained azadirachtin (ICA for the control of Hypothenemus hampei, in addition to the effects of residual castor oil. We evaluated the effectiveness of the vegetable oils of canola, sunflower, corn, soybean and castor, two mineral oils (assist® and naturol®, and the ICA for the control of H. hampei. The compounds were tested at a concentration of 3.0% (v v-1. The median lethal concentration (LC50 was estimated with Probit analysis. The oil of castor bean and extract of castor bean cake were also evaluated at concentrations of 3.0% (v v-1 and 3.0% (m v-1, respectively. The mortality rates for H. hampei caused by the ICA and the castor oil were 40.8 and 53.7%, with LC50 values of 6.71 and 3.49% (v v-1, respectively. In the castor oil, the methyl esters of the fatty acids were palmitic (1.10%, linoleic (4.50%, oleic (4.02%, stearic (0.50% and ricinoleic acids (88.04%. The extract of the castor bean cake was not toxic to H. hampei. The persistence of the castor oil in the environment was low, and the cause of mortality for H. hampei was most likely the blockage of the spiracles, which prevented the insects from breathing.

  11. Depletion policies for oil-exporting developing economies

    Energy Technology Data Exchange (ETDEWEB)

    Stournaras, Y A

    1984-01-01

    The fact that most oil-exporting countries are developing economies has important implications for oil supply which have not been properly taken into account in the literature on exhaustible resource depletion. The way in which depletion policies are affected by trade uncertainty, given the high degree of the major oil exporters' 'dependence' on crude oil revenues, by investment time lags which delay the exploitation of (some of) these countries' comparative advantage in a petroleum based development, and by ideological objections to the ideal of a rentier society and to foreign capital are examined.

  12. ECOLOGY SAFETY TECHNOLOGIES OF UNCONVENTIONAL OIL RESERVES RECOVERY FOR SUSTAINABLE OIL AND GAS INDUSTRY DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Viacheslav Zyrin

    2016-09-01

    Full Text Available The problem of effective technology for heavy oil recovery nowadays has a great importance, because of worsening geological conditions of the developed deposits, decreasing recovery factor, increasing the part of heavy oil. For the future sustainable development of oil producing industry the involved technologies must require energy effectiveness and ecological safety. The paper proves the enhanced oil recovery methods necessity for heavy oil deposits, highlighted thermal technologies as the most effective. But traditional thermal treatment technologies is a source of air pollutant emission, such as CO, NO etc. The calculation of emissions for traditional steam generator is provided. Besides, the paper shows the effectiveness of electrical enhanced oil recovery methods. The advantages of associated gas as a fuel for cogeneration plants is shown. The main approaches to implementation of carbon dioxide sequestration technologies in the oil and gas industry of Russia are defined. Conceptual view of СО2-EOR technologies potential within the context of sustainable development of oil and gas industry are presented. On the basis of the conducted research a number of scientific research and practical areas of the CCS technology development are revealed.

  13. Life cycle assessment of castor-based biorefinery: a well to wheel LCA

    DEFF Research Database (Denmark)

    Khoshnevisan, Benyamin; Rafiee, Shahin; Tabatabaei, Meisam

    2017-01-01

    of their ability in converting biomass into a spectrum of marketable products and bioenergies. This study was aimed at developing different novel castor-based biorefinery scenarios for generating biodiesel and other co-products, i.e., ethanol and biogas. In these scenarios, glycerin, heat, and electricity were...

  14. Polymercaptanized soybean oil – properties and tribological characterization

    Science.gov (United States)

    Polymercaptanized vegetable oils are produced in industrial scale by the addition of hydrogen sulfide across double bonds or epoxides of vegetable oils, in the presence of UV-light. To date, soybean oil, epoxidized soybean oil, and castor oil has been mercaptanized using such a procedure. Depending ...

  15. Development of a stranded oil in coarse sediment (SOCS) model

    International Nuclear Information System (INIS)

    Humphrey, B.; Owens, E.; Sergy, G.

    1993-01-01

    Oil spills in Canadian waters have a high probability of impacting coarse sediment beaches, yet the ability to predict oil fate and estimate natural self-cleaning rates is less than adequate. Data is lacking to understand fully many oil sediment interactions. Historically, shoreline interactions have been considered using fairly simple concepts. The authors examined the processes that may occur on a coarse sediment beach, selected those which are important, and developed a fate and persistence model for stranded oil. The processes were divided into stages relative to the spill event, and the factors which affect each stage were evaluated. Three areas of special interest were the capacity of a beach to hold oil, the residual capacity of a beach for oil, and the long-term fate of the oil. After developing model algorithms, the outputs were compared to a data base of information collected during the Exxon Valdez oil spill. The stranded oil in coarse sediment model will provide information at two levels: a general level for planning and sensitivity mapping and a more detailed level intended for the prediction of oil fate on specific known beaches. The strengths and weaknesses of the model have been assessed in terms of data deficiencies. The type and nature of the data which are most useful to, and which need to be collected for, spill planning and spill monitoring were identified. The model shows that the important factors directing the fate of oil on coarse sediment beaches are porosity and permeability, determined by grain size and oil properties (composition, viscosity, etc.). The natural rate of removal of oil, modeled as a first-order (exponential) removal, is dependent on the stage of the spill process and on wave energy

  16. Research and information needs for management of oil shale development

    Energy Technology Data Exchange (ETDEWEB)

    1983-05-01

    This report presents information and analysis to assist BLM in clarifying oil shale research needs. It provides technical guidance on research needs in support of their regulatory responsibilities for onshore mineral activities involving oil shale. It provides an assessment of research needed to support the regulatory and managerial role of the BLM as well as others involved in the development of oil shale resources on public and Indian lands in the western United States.

  17. Development of Permeable Reactive Barriers (PRB) Using Edible Oils

    Science.gov (United States)

    2008-06-01

    naturally occurring processes of advection and dispersion to bring the contaminants to the treatment barrier. A large scale approach would be to form a...process has been developed for distributing soybean oil as an oil-in-water emulsion consisting of small oil droplets dispersed in a continuous...Thiele Kaolin Company, Sandersville, Georgia) was added to certain materials to evaluate the effect of increasing clay content. Grain size

  18. Calendula oil processing : seed classification, oil extraction, refining process development and oil quality aspects

    NARCIS (Netherlands)

    Janssens, R.J.J.

    2000-01-01

    The difference in Calendula oil quality from fractions obtained after seed classification is enormous. The oil quality varies from excellent to very poor, according to important aspects such as in the hulls and dust fraction, high free fatty acid values (13% vs. 0.6%) are found. This can be

  19. Abu Dhabi presses oil development program

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that Abu Dhabi Co. for Onshore Operations (ADCO), the biggest oil producer in the United Arab Emirates, reports 1991 was a successful year despite the Persian Gulf war. Meantime, Abu Dhabi's Zakum, the second largest oil field in the Persian Gulf, boosted production to more than 300,000 b/d, and officials said production will rise further when a platform complex is recommissioned in 1993

  20. Development Efforts Of Oil Companies As Perceived By Rural ...

    African Journals Online (AJOL)

    ... that the host communities are highly satisfied with companies' efforts (projects and services) to them. Based on these findings, recommendations were made. Key words: Oil producing communities; oil exploration/production; company's development efforts; Journal of Agriculture and Social Research Vol.4(1) 2004: 60-71 ...

  1. Gamma-ray induced mutants in castor (Ricinus communis L.)

    International Nuclear Information System (INIS)

    Janila, P.; Ashok Kumar, A.; Rajashekar Reddy, N.; Hemalatha, V.

    2007-01-01

    We report isolation of three recessive mutants in castor using dry seed irradiation with gamma rays. The crinkled leaf mutant (crf) was identified in K-55-112 M2 family and leafy mutant (lea) in H-55-577 M2 family; both are recessive lethal and thus maintained as heterozygotes. The cri mutant has highly wrinkled leaves resembling finger millet head and failed to enter reproductive phase, consequently did not produce seeds. The number of leaf lobes is reduced in lea mutant and though it produced spikes, the male and female flowers are converted to leafy appendages. The third mutant, fused (Ius) stem identified in H-55-617 M2 family is a recessive mutant. The branches of which are fused at the base and though each branch terminates in to monoceous spike like normal plant, the spike is highly condensed. The three mutants under report are valuable genetic stocks for development of linkage maps in castor, which is at infancy. (author)

  2. Development and efficacy assessments of tea seed oil makeup remover.

    Science.gov (United States)

    Parnsamut, N; Kanlayavattanakul, M; Lourith, N

    2017-05-01

    The efficacy of tea seed oil to clean foundation and eyeliner was evaluated. The safe and efficient tea seed oil makeup remover was developed. In vitro cleansing efficacy of makeup remover was UV-spectrophotometric validated. The stability evaluation by means of accelerated stability test was conducted. In vitro and in vivo cleansing efficacy of the removers was conducted in a comparison with benchmark majorly containing olive oil. Tea seed oil cleaned 90.64±4.56% of foundation and 87.62±8.35% of eyeliner. The stable with most appropriate textures base was incorporated with tea seed oil. Three tea seed oil removers (50, 55 and 60%) were stabled. The 60% tea seed oil remover significantly removed foundation better than others (94.48±3.37%; Pmakeup removers had been developed. The consumers' choices towards the makeup remover containing the bio-oils are widen. In vitro cleansing efficacy during the course of makeup remover development using UV-spectrophotometric method feasible for pharmaceutic industries is encouraged. Copyright © 2016 Académie Nationale de Pharmacie. Published by Elsevier Masson SAS. All rights reserved.

  3. Development of oil hydrocarbon fingerprinting and identification techniques

    International Nuclear Information System (INIS)

    Wang Zhendi; Fingas, Merv F.

    2003-01-01

    Oil, refined product, and pyrogenic hydrocarbons are the most frequently discovered contaminants in the environment. To effectively determine the fate of spilled oil in the environment and to successfully identify source(s) of spilled oil and petroleum products is, therefore, extremely important in many oil-related environmental studies and liability cases. This article briefly reviews the recent development of chemical analysis methodologies which are most frequently used in oil spill characterization and identification studies and environmental forensic investigations. The fingerprinting and data interpretation techniques discussed include oil spill identification protocol, tiered analytical approach, generic features and chemical composition of oils, effects of weathering on hydrocarbon fingerprinting, recognition of distribution patterns of petroleum hydrocarbons, oil type screening and differentiation, analysis of 'source-specific marker' compounds, determination of diagnostic ratios of specific oil constituents, stable isotopic analysis, application of various statistical and numerical analysis tools, and application of other analytical techniques. The issue of how biogenic and pyrogenic hydrocarbons are distinguished from petrogenic hydrocarbons is also addressed

  4. Fractional characterisation of jatropha, neem, moringa, trisperma, castor and candlenut seeds as potential feedstocks for biodiesel production in Cuba

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Carlos [Bioresource Technology group, Department of Chemistry and Chemical Engineering, University of Matanzas, Autopista a Varadero, km 3, Matanzas 44740 (Cuba); Department of Chemical Engineering, University of Vigo (Campus Ourense), Polytechnical Building, As Lagoas, 32004 Ourense (Spain); Moure, Andres; Dominguez, Herminia; Parajo, Juan C. [Department of Chemical Engineering, University of Vigo (Campus Ourense), Polytechnical Building, As Lagoas, 32004 Ourense (Spain); Martin, Giraldo [Experimental Station of Pastures and Forages ' ' Indio Hatuey' ' , Central Espana Republicana, CP 44280, Matanzas (Cuba); Carrillo, Eugenio [Biomass Energy Department, National Renewable Energy Centre (CENER), Ciudad de la Innovacion 4, Sarriguren, 31621 Pamplona (Spain)

    2010-04-15

    A preliminary investigation on the suitability of various non-edible oil seeds for the integral utilisation of their fractions for production of biodiesel and other products was carried out. The oil seeds considered were jatropha (Jatropha curcas), neem (Azadirachta indica), moringa (Moringa oleifera), trisperma (Aleurites trisperma), castor beans (Ricinus communis) and candlenut (Aleurites moluccana). The highest oil content (62.0% (w/w)) was found in trisperma seeds, but the use of that oil for biodiesel production is restricted by its high content of polyunsaturated fatty acids. The oils of castor beans and moringa contained 86.0% of ricinoleic acid and 70.6% of oleic acid, respectively, while in the oils from the other seeds no predominance of any acid was observed. According to the oil yield and to the fatty acid composition of the oil, jatropha was identified as the most promising oil seed for biodiesel production in Cuba. All the press cakes were rich in protein, the highest content (68.6%) being detected in moringa cake. The investigation revealed that the husks of neem and moringa can be considered potential substrates for ethanol production due to their high cellulose content (approximately 30%). A high concentration (4.3%) of acetyl groups was found in neem husks, what is favourable for the hydrolytic conversion of polysaccharides to simple sugars. A high protein content (15.2%) was detected in moringa husks, which is a positive feature for lowering the cost of nutrient supplementation in ethanolic fermentation. (author)

  5. LHCb: CASTORFS - A Filesystem to Access CASTOR

    CERN Multimedia

    Mazurov, A

    2009-01-01

    CASTOR provides a powerful and rich interface for managing files and pools of files backed by tape-storage. The API is modelled very closely on that of a POSIX filesystem, where part of the actual I/O part is handled by the rfio library. While the API is very close to POSIX it is still separated, which unfortunately makes it impossible to use standard tools and scripts straight away. This is particularly inconvenient when applications are written in languages other than C/C++ such as is frequently the case in web-apps. Here up to now the only the recourse was to use command-line utilities and parse their output, which is clearly a kludge. We have implemented a complete POSIX filesystem to access CASTOR using FUSE (Filesystem in Userspace) and have successfully tested and used this on SLC4 and SLC5 (both in 32 and 64 bit). We call it CastorFS. In this paper we will present its architecture and implementation, with emphasis on performance and caching aspects.

  6. CASTORFS - A filesystem to access CASTOR

    Energy Technology Data Exchange (ETDEWEB)

    Mazurov, Alexander; Neufeld, Niko, E-mail: alexander.mazurov@cern.c [CERN, Geneve 23 (Switzerland)

    2010-04-01

    CASTOR provides a powerful and rich interface for managing files and pools of files backed by tape-storage. The API is modelled very closely on that of a POSIX filesystem, where part of the actual I/O part is handled by the rfio library. While the API is very close to POSIX it is still separated, which unfortunately makes it impossible to use standard tools and scripts straight away. This is particularly inconvenient when applications are written in languages other than C/C++ such as is frequently the case in web-apps. Here up to now the only the recourse was to use command-line utilities and parse their output, which is clearly a kludge. We have implemented a complete POSIX filesystem to access CASTOR using FUSE (Filesystem in Userspace) and have successfully tested and used this on SLC4 and SLC5 (both in 32 and 64 bit). We call it CastorFS. In this paper we will present its architecture and implementation, with emphasis on performance and caching aspects.

  7. Coconut oil and palm oil's role in nutrition, health and national development: A review.

    Science.gov (United States)

    Boateng, Laurene; Ansong, Richard; Owusu, William B; Steiner-Asiedu, Matilda

    2016-09-01

    Coconut and palm oils which were the major sources of dietary fats for centuries in most of West Africa have been branded as unhealthy highly saturated fats. Their consumption has been peddled to supposedly raise the level of blood cholesterol, thereby increasing the risk of coronary heart disease. This adverse view has led to a reduction in their consumption in West Africa and they have been substituted for imported vegetable oils. Recent information however, indicates some beneficial effects of these oils particularly their roles in nutrition, health and national development. There is the need for a better understanding of their effects on health, nutritional status and national development. This paper therefore attempts to review the roles which coconut and palm oils play in these respects in developing countries, as a means of advocating for a return to their use in local diets. None declared.

  8. Elastohydrodynamic Traction Properties of Seed Oils

    Science.gov (United States)

    The elastohydrodynamic traction coefficient (tc) properties of nine seed oils of varying chemical structures, PAO and hexadecane, were investigated using a ball-on disk traction apparatus. The seed oils were: castor oil, a triglyceride with hydroxyl functional group; jojoba, a monoglyceride; and s...

  9. Elastohydrodynamic (EHD) traction properties of seed oils

    Science.gov (United States)

    The elastohydrodynamic traction coefficient (tc) properties of nine seed oils of varying chemical structures, PAO and hexadecane, were investigated using a ball-on disk traction apparatus. The seed oils were: castor oil, a triglyceride with hydroxyl functional group; jojoba, a monoglyceride; and sev...

  10. Oil and gas market developments in Turkey

    International Nuclear Information System (INIS)

    Kaygusuz, K.

    2003-01-01

    Turkey's strategic location makes it a natural 'energy bridge' between major oil and gas producing areas in the Middle East and Caspian Sea regions on one hand and consumer markets in Europe on the other. Oil consumption has increased in recent years in Turkey, and this trend is expected to continue, with growth of 2-3% annually in coming years. The annual oil consumption of the country is around 31.3 million tons, while 83% of total consumption is supplied from imports and only 17% is supplied from indigenous production. Oil provides around 43% of Turkey's total energy requirements, but its share is declining (as the share of natural gas rises). On the other hand, due to diversification efforts of energy sources, use of natural gas was newly introduced into the Turkish economy in 1987 and has been growing rapidly. Turkey's natural gas reserves seem limited and current gas production in the country meets 2.8% of domestic consumption requirements. The annual natural gas consumption of Turkey is around 14.7 billion m 3 and is assumed to increase by 12% per annum. Turkish natural gas use is projected to increase dramatically in coming years, with the prime consumers expected to be industry and power plants. Turkey has chosen natural gas as the preferred fuel for the massive amount of new power plant capacity to be added in coming years. (Author)

  11. CONDITIONS OF FORMING OIL COMPANY INNOVATIVE DEVELOPMENT MODEL

    Directory of Open Access Journals (Sweden)

    A. N. Dmitrievsky

    2012-01-01

    Full Text Available Innovative development of contemporary RF oil industry enterprises and companies faces considerable difficulties. Main problems that hamper scientific and technological development and modernization of domestic oil companies are lack of demand for innovations, specific corporateculture of these companies and the country’s scientific and technological politics. Situation with advanced domestic technologies in the industry and their long-lasting and efficient use by Russian enterprises and companies is examined.

  12. Development of taxation system for oil production companies in Russia

    Science.gov (United States)

    Salmina, S. V.; Sboeva, I. M.; Selivanovskaya, J. I.; Khafizova, A. R.; Fomin, V. P.

    2018-01-01

    The present article is devoted to the taxation system for oil production companies in Russia. The role of oil production companies in the realization of the fiscal function of the state is shown. Tax and due receipts at the consolidated budget of the Russian Federation from major economic sectors in the years 2013-2015 are presented and analysed. An investigation of oil production taxation peculiarities is carried out. In particular, mineral extraction tax analysis is made, the said tax being one of the basic taxes paid by oil production companies. The authors come to a conclusion that mineral extraction tax in Russia needs reforming. Based on the investigation realized possible ways of taxation system development in respect of oil production companies in Russia are proposed. Thus, taking into account the fact that oil industry is very important for budget revenue formation, initially it is planned to test the new taxation system principles in a limited number of deposits, so called ‘pilot projects’. For highly profitable minefield deposits it is planned to introduce progressive and regressive index, varying depending on oil prices. Within the framework of the investigation the authors come to a conclusion that it is necessary to introduce gradually the taxation system based on the definition of surplus profit depending on the cost effectiveness and taking into account oil prices.

  13. Oil sector developments: Russia, Azerbaijan and Central Asia

    International Nuclear Information System (INIS)

    Ebel, R.E.

    1997-01-01

    The level of resource development in Russia, Azerbaijan and in the countries of Central Asia was discussed. The resources of crude oil and natural gas in the area are considered more than sufficient to support any reasonable expansion for the foreseeable future and this should mean higher exportable surpluses. The collapse of the Soviet Union resulted in the emergence of 15 sovereign and independent nations, collectively known as the Commonwealth of Independent States (CIS). The end of the cold war opened the CIS's oil sector to foreign investors. However, access to these markets has been blocked by the physical isolation of Azerbaijan and Central Asia. According to forecasters, by the year 2005, the annual oil production of the CIS shall reach 7.9 million barrels per day, approximately 11.3 per cent higher than in 1996. Natural gas production is expected to increase by about 30 per cent to 900 billion cubic meters per year. Western capital will be key to the future of resource development in Azerbaijan, Kazakhstan, and Turkmenistan. It was suggested that by 2010, the exportable oil from the Caspian Sea and Central Asia will represent 3 to 4 per cent of world oil supply. This projection emphasizes the fact that this new oil would be in addition to, and not in place of oil from the Persian Gulf. Some of the economic and political problems that have had a delaying effect on the development of pipelines through these regions were also reviewed

  14. Photosynthetic pigments and gas exchange in castor bean under conditions of above the optimal temperature and high CO2

    Directory of Open Access Journals (Sweden)

    Fabiola França Silva

    2015-08-01

    Full Text Available The castor bean plant, a Euphorbiaceae oil seed C3-metabolism rustic and drought-resistant plant, is cultivated in a wide range of environments due to its good adaptive capacity. However, given the current environmental changes, many biochemical and physiological impacts may affect the productivity of important crops, such as castor bean. This work aimed to evaluate the impacts of the castor bean gas exchange in response to high temperature and increased CO2concentration.Our experiment was conducted in a phytotron located at Embrapa Algodão in 2010. We adopted a completely randomized design, with four treatments in a factorial combination of two temperatures (30/20 and 37/30°C and two CO2 levels (400 and 800 mmol L-1; four replications were performed, obtained in five surveys over the growth cycle, for a total of 80 sample units. An infrared gas analyzer (IRGA - Infra Red Gas Analyzer was used for the quantification of the photosynthetic rate, stomatal conductance and transpiration. An increase in the atmospheric CO2 concentration and temperature negatively affected the physiology of the castor bean plants, decreasing the net rate of photosynthesis, transpiration and stomatal conductance.

  15. Screening of spontaneous castor bean accesses for genetic ...

    African Journals Online (AJOL)

    ... discriminant power between the castor bean accesses, being the multivariate analysis efficient in this process. The castor bean accesses ACS-001 CRSP and ACS-001-MASP are promising for introduction in genetic improvement programs of this culture. Keywords: Ricinus communis L., genotype, multivariate statistics, ...

  16. Pyrolysis of Waste Castor Seed Cake: A Thermo-Kinetics Study

    Directory of Open Access Journals (Sweden)

    Abdullahi Muhammad Sokoto

    2018-03-01

    Full Text Available Biomass pyrolysis is a thermo-chemical conversion process that is of both industrial and ecological importance. The efficient chemical transformation of waste biomass to numerous products via pyrolysis reactions depends on process kinetic rates; hence the need for kinetic models to best design and operate the pyrolysis. Also, for an efficient design of an environmentally sustainable pyrolysis process of a specific lignocellulosic waste, a proper understanding of its thermo-kinetic behavior is imperative. Thus, pyrolysis kinetics of castor seed de-oiled cake (Ricinus communis using thermogravimetric technique was studied. The decomposition of the cake was carried out in a nitrogen atmosphere with a flow rate of 100mL min-1 from ambient temperature to 900 °C. The results of the thermal profile showed moisture removal and devolatilization stages, and maximum decomposition of the cake occurred at a temperature of 200-400 °C. The kinetic parameters such as apparent activation energy, pre-exponential factor, and order of reaction were determined using Friedman (FD, Kissinger-Akahira-Sunose (KAS, and Flynn-Wall-Ozawa (FWO kinetic models. The average apparent activation energy values of 124.61, 126.95 and 129.80 kJmol-1 were calculated from the slopes of the respective models. The apparent activation energy values obtained depends on conversion, which is an evidence of multi-step kinetic process during the pyrolytic decomposition of the cake. The kinetic data would be of immense benefit to model, design and develop a suitable thermo-chemical system for the conversion of waste de-oil cake to energy carrier.

  17. The Influence and Compatibility of Vegetable Oils and other ...

    African Journals Online (AJOL)

    ABC_2

    castor oil, sunflower oil, coconut oil and cottonseed oil respectively in different concentrations (10%, 20% and 30% w/w of drug) as permeation enhancers. The films were prepared by incorporating them along with plasticizer [2]. In all cases, 30% w/w concentration of permeation enhancer showed good release and this ...

  18. Castor halls. A problem for the century; Castor-Hallen. Ein Jahrhundertproblem

    Energy Technology Data Exchange (ETDEWEB)

    Stay, Jochen

    2017-01-15

    The interim storage of high-level radioactive waste will last longer than asserted. The existing halls for the castor casks are not appropriate for this task with respect to safety. The casks themselves are not designed for long-term storage. Politics obviously do not consider the problems seriously.

  19. Government and industry roles in heavy oil resource development

    International Nuclear Information System (INIS)

    Sharp, D.A.

    1994-01-01

    Developing a heavy oil deposit in Canada requires proper reservoir selection and ongoing resrvoir management. The number of unexploited heavy oil reservoirs whch can be economically produced through primary methods is rapidly declining. In addition, primary recoveries of 5-10% of the heavy oil in place are unacceptable and recovery rates of over 50% are needed. Enhanced thermal recovery projects are therefore needed, but these entail significant technical and commodity pricing risks. It is suggested that provincial governments recognize those risks and offer incentives by not encumbering such projects with up-front royalties. If industry is to assume the risks, governments must develop a fiscal regime that allows for a satisfactory return on capital and acceptable sharing of profits. At the federal level, it is suggested to broaden the interpretation of research and development activity to include enhanced recovery projects, making the tax breaks available to scientific research also available to heavy oil development. Government policies favoring heavy oil in Saskatchewan and Alberta are cited as good examples of ways to encourage the heavy oil industry

  20. Scale up risk of developing oil shale processing units

    International Nuclear Information System (INIS)

    Oepik, I.

    1991-01-01

    The experiences in oil shale processing in three large countries, China, the U.S.A. and the U.S.S.R. have demonstrated, that the relative scale up risk of developing oil shale processing units is related to the scale up factor. On the background of large programmes for developing the oil shale industry branch, i.e. the $30 billion investments in colorado and Utah or 50 million t/year oil shale processing in Estonia and Leningrad Region planned in the late seventies, the absolute scope of the scale up risk of developing single retorting plants, seems to be justified. But under the conditions of low crude oil prices, when the large-scale development of oil shale processing industry is stopped, the absolute scope of the scale up risk is to be divided between a small number of units. Therefore, it is reasonable to build the new commercial oil shale processing plants with a minimum scale up risk. For example, in Estonia a new oil shale processing plant with gas combustion retorts projected to start in the early nineties will be equipped with four units of 1500 t/day enriched oil shale throughput each, designed with scale up factor M=1.5 and with a minimum scale up risk, only r=2.5-4.5%. The oil shale retorting unit for the PAMA plant in Israel [1] is planned to develop in three steps, also with minimum scale up risk: feasibility studies in Colorado with Israel's shale at Paraho 250 t/day retort and other tests, demonstration retort of 700 t/day and M=2.8 in Israel, and commercial retorts in the early nineties with the capacity of about 1000 t/day with M=1.4. The scale up risk of the PAMA project r=2-4% is approximately the same as that in Estonia. the knowledge of the scope of the scale up risk of developing oil shale processing retorts assists on the calculation of production costs in erecting new units. (author). 9 refs., 2 tabs

  1. The Netherlands: development of oil and gas reserves

    International Nuclear Information System (INIS)

    1993-01-01

    Oil was first discovered in The Netherlands in the late 1930s near The Hague. Later the larger onshore field at Schoonebeek was found. In the 1960s significant resources of oil were discovered in the Dutch sector of the North Sea. However onshore oil still provides about 20% of the nation's requirements. In the 1960s the vast size of the onshore Groningen gas field became apparent and its subsequent development has provided the Dutch with a huge source of wealth. In recent years the Dutch Continental Shelf has also yielded substantial reserves of gas, although these are not yet as important as the onshore gas reserves. Dutch Government policy is designed to encourage the development of smaller offshore gas fields thereby conserving the Gronigen field. Dutch oil and gas production, licensing and drilling activities are discussed, and the prospects for British suppliers is considered. (author)

  2. Design And Development Of Chopper Machine For Palm Oil Midrib

    OpenAIRE

    Arif, Muhammad; Azmi, Azmi; Purba, Immanuel

    2016-01-01

    The midrib of palm oil has good potency to be processed become animal feed (silage) and compost where the midribs are chopped into small pieces. The opportunity of this development process that can more be benefit and valuable encourages researcher to design and create a machine that capable to chop the midribs of palm oil. In this research, researcher designs and creates a chopper machine which can be operated safely and more efficient based on ergonomics approach. Researcher also uses anthr...

  3. Oil and gas field development: an NOC perspective

    Energy Technology Data Exchange (ETDEWEB)

    Kronman, George [Halliburton Energy Services (United States). Landmark Division

    2004-07-01

    Every day, oil companies around the world face real-life field development and management problems like the ones described above. Making timely and well-informed field development decisions are among the most important decisions the management of any oil company can make. The field development phase of the oil and gas life cycle extends from the discovery of a hydrocarbon deposit through initial production. It also includes revitalization of mature and marginal fields. Field development projects require the greatest level of cross-disciplinary integration and the largest investment decisions in the entire oil field life cycle. The ultimate economic success or failure of most fields is set by the quality of decisions made during field development. Oil companies take many different approaches to field development based on unique business drivers, their asset portfolio mix and risk tolerance, access to data and experienced manpower, adoption of technology, availability of capital, ownership, management style and so on. This paper focuses on understanding and addressing the particular field development challenges facing NOCs today. (author)

  4. Enabling technologies for oil sands development

    International Nuclear Information System (INIS)

    Bailey, R.T.

    1998-01-01

    A review of oil sands production and expansion possibilities in Alberta were presented. The enabling technologies for oil sands projects include mining (bucketwheels, draglines, trucks, shovels conveyors, slurry hydrotransport); extraction (conditioning tumblers, pipelines, tanks, hot water, caustic, cold water, frothers); froth cleaning (centrifuges, solvent treatment); tailings (tailings ponds, consolidated tailings); and upgrading (coking, hydrotreating for SCO, hydrocracking and multiple products). The enabling technologies for in situ production include cyclic steam stimulation for vertical wells, steam assisted gravity drainage (SAGD) for dual horizontal wells, and cold production with wormholes. This paper described the recovery potentials of each of these processes. It also discussed the role of government and industry in research and cooperative research involving both the private and public sectors. Examples of each of these were described such as SAGD, the OSLO cold water extraction process, The consolidated tailings (CT) project, the low energy extraction process (slurry production, hydrotransport, pipeline conditioning and warm water extraction), and research in fine tailings, to demonstrate that although objectives may differ, government and industry research objectives are complementary

  5. CASTOR detector. Model, objectives and simulated performance

    International Nuclear Information System (INIS)

    Angelis, A. L. S.; Mavromanolakis, G.; Panagiotou, A. D.; Aslanoglou, X.; Nicolis, N.; Lobanov, M.; Erine, S.; Kharlov, Y. V.; Bogolyubsky, M. Y.; Kurepin, A. B.; Chileev, K.; Wlodarczyk, Z.

    2001-01-01

    It is presented a phenomenological model describing the formation and evolution of a Centauro fireball in the baryon-rich region in nucleus-nucleus interactions in the upper atmosphere and at the LHC. The small particle multiplicity and imbalance of electromagnetic and hadronic content characterizing a Centauro event and also the strongly penetrating particles (assumed to be strangelets) frequently accompanying them can be naturally explained. It is described the CASTOR calorimeter, a sub detector of the ALICE experiment dedicated to the search for Centauro in the very forward, baryon-rich region of central Pb+Pb collisions at the LHC. The basic characteristics and simulated performance of the calorimeter are presented

  6. Upstream oil and gas. Subsector no. 7: Oil and gas exploration and development 1995 to 1999

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-08-01

    Prepared by the Alberta Human Resources and Employment, this report provides a summary of the lost-time injuries and disease descriptions of workers injured while employed in the upstream oil and gas industries in Alberta during the period 1995 to 1999. The report includes the characteristics of the injured worker and the risk of injury to workers in the industries in Alberta, as well as the cost of injuries and revenue by means of total premiums paid by the employers. The occupational fatalities that were accepted by the Workers Compensation Board and investigated by the Occupational Health and Safety were summarized in the report along with a brief description of the injuries. The aim was to provide information concerning health and safety issues to government, employers, workers, and health and safety officers in the industries in Alberta about health and safety issues. The focus was placed on the oil and gas exploration and development sub-sector. Defined as all upstream oil field activities of employers which generate revenue from the production and sale of crude oil and/or natural gas, the sub-sector comprises major integrated oil and gas companies and small independent producers. In those cases where the owner/producer operates its own upstream production/processing facilities, they form an integral part of this sub-section. In addition, oil and gas marketing firms are included. Oil/gas well, well head equipment; flow lines/gathering systems tied into field processing facilities; battery sites/compressors stations; crude oil separators and natural gas dehydrators/treaters; natural gas/sulfur processing plants; heavy oil projects including steam generation; and other enhanced recovery methods are all included in the sub-sector. The other sub-sectors in the upstream oil and gas industries are: exploration, oilfield maintenance and construction, well servicing with service rigs and power swivels, drilling of oil and gas wells, oilfield downhole and other

  7. Development of the German mineral oil market in 1995. Pt. 2

    International Nuclear Information System (INIS)

    Mohnfeld, J.; Heinze, W.

    1996-01-01

    Following a brief glance at the boundary conditions for the German market (world oil market, inland energy consumption), the development of inland sales is described. One after one, the mineral oil products Otto engine fuel, diesel fuel, light fuel oil and heavy fuel oil are considered. Further sections deal with crude oil supply, the supply of mineral oil produce, refinery production, the development in the sales sector, the profit situation of the mineral oil industry, the development of prices (according to products) and expenditure in foreign exchange for mineral oil. The article contains numerous tables and graphs; comparisons with the years previously illustrate development trends. (UA) [de

  8. Development of a statistical oil spill model for risk assessment.

    Science.gov (United States)

    Guo, Weijun

    2017-11-01

    To gain a better understanding of the impacts from potential risk sources, we developed an oil spill model using probabilistic method, which simulates numerous oil spill trajectories under varying environmental conditions. The statistical results were quantified from hypothetical oil spills under multiple scenarios, including area affected probability, mean oil slick thickness, and duration of water surface exposed to floating oil. The three sub-indices together with marine area vulnerability are merged to compute the composite index, characterizing the spatial distribution of risk degree. Integral of the index can be used to identify the overall risk from an emission source. The developed model has been successfully applied in comparison to and selection of an appropriate oil port construction location adjacent to a marine protected area for Phoca largha in China. The results highlight the importance of selection of candidates before project construction, since that risk estimation from two adjacent potential sources may turn out to be significantly different regarding hydrodynamic conditions and eco-environmental sensitivity. Copyright © 2017. Published by Elsevier Ltd.

  9. OECD (Organization of Economic Cooperation and Development) oil demand

    International Nuclear Information System (INIS)

    Huntington, H.G.

    1993-01-01

    Econometric response surfaces for nine different world oil models are estimated for aggregate oil demand with in the developed countries of the Organization of Economic Cooperation and Development (OECD). The estimates are based upon scenario results reported for the 1989-2010 period in a recent model comparison study. The response surface approach provides a parsimonious summary of model responses. It enables one to estimate long-run price elasticities directly rather than to infer such responses from 20-year cross-scenario results. It also shows more directly the significant effect of initial demand conditions (in 1988) on future oil demand growth. Due to the dynamic nature of the oil demand response, past prices exert a strongly positive effect on future oil demands in some models, but little or even negative effect in other models. On the basis of this finding, we urge demand modellers to be much more explicit about what their systems reveal about the extent of disequilibrium embedded in their model's starting oil demand conditions. (author)

  10. Development of Electrical Breakdown in Transformer Oil

    Directory of Open Access Journals (Sweden)

    Jozef Kudelcik

    2006-01-01

    Full Text Available Power transformers are key equipment for transfer and distribution of the electric power. Considering the significance of the power transformers in the electric system, their price and possible damages occurred by accidents, it is necessary to pay attention to their higher prevention. To prevent failure states of transformers, we perform different types ofmeasurements. They shall illustrate a momentary state of the measured equipment and if necessary to draw attention in advance to changes of parameters, which have specific relationship to no-failure operation of the equipment. The conditions under which breakdown of composite liquid/ solid insulation can occur, e.g. in transformer, play an important role in designing such insulation. The liquid, mainly mineral oil, generally constitutes the weakest part of insulation and a great amount of work has been devoted to the study of streamers, which appear in the gaseous phase, and most often are triggering the failure of insulation.

  11. Morphology and viability of castor bean genotypes pollen grains

    Directory of Open Access Journals (Sweden)

    Maria Selma Alves Silva Diamantino

    2016-01-01

    Full Text Available The objective of this work was to characterize the morphology and viability of the pollen of 15 genotypes of castor bean (Ricinus communis L. and to generate information that can assist in the selection of highly promising male parents for future use in genetic improvement programs aimed at producing seeds for oil extraction. Acetolysis and scanning electron microscopy was used to characterize the morphology of the pollen. The viability of the pollen grains was estimated by in vitro germination and colorimetric analysis (acetocarmine 2% and 2, 3, 5-triphenyltetrazolium chloride 1%. For the in vitro germination, pollen grains were grown in 10 types of solidified culture medium consisting of different concentrations of sucrose, boric acid, calcium nitrate, magnesium sulfate and potassium nitrate. The pollen grains had the following characteristics: medium size, isopolar and subspheroidal shape, radial symmetry, circular ambit, 3-colporate, elongated endoapertures, tectate exine and granulated sexine. The acetocarmine dye overestimated pollen viability. The media M5 and M8 were the most efficient at promoting the germination of pollen grains. The studied genotypes had high levels of viability and can therefore be used as male parents in genetic improvement programs.

  12. Recent developments, new trends in seed crushing and oil refining

    Directory of Open Access Journals (Sweden)

    Kővári Katalin

    2004-11-01

    Full Text Available Oil processing was considered as slowly changing “traditional” industry but the recent decades’ developments and trends resulted in a lot of changes initiated by market, industry, environment protection and consumer needs. Driving force of the developments were centralization of the industry, more and more concerns on environmental impact, increased importance of food-feed safety, and last but not least research and development activity together with improved analytical capabilities. The presentation gives an overview on the results achieved on the field of the following areas: the criteria of applicability of physical refining of seed oils, solutions for proper degumming, the effect of seed pretreatment and crushing conditions on the crude oil quality, the importance and role of bleaching and active carbon treatment, the proper practice of deacidification/deodorization.

  13. Effect of calcium and magnesium silicate on the growth of the castor oil plant subjected to salinity levels Efeito de silicato de cálcio e magnésio sobre o crescimento de plantas de mamoneira submetidas a níveis de salinidade

    Directory of Open Access Journals (Sweden)

    José Félix Brito Neto

    2012-12-01

    Full Text Available Salt stress decreases the osmotic potential of soil solution causing water stress, causing toxic effects in the plants resulting in injuries on the metabolism and nutritional disorders, thus compromising the plant growth, resulting in lower production. The calcium silicate and magnesium can perform the same function as limestone, besides providing silicon to plants, may also contribute to the resistance of plants to salt stress. Thus, the objective of this study was to evaluate the effect of calcium and magnesium silicate on the growth of the castor oil plant BRS Energia cultivated under saline conditions. This study evaluated plant height, stem diameter, number of leaves, leaf area, dry weight of shoot and root, and soil chemical characteristics. There was no interaction between factors of salinity level and of silicate level regarding the evaluated variables. There was a direct relationship between salinity levels and plant growth in height and stem diameter. The K concentration in soil were affected by salinity levels. O estresse salino diminui o potencial osmótico da solução do solo causando estresse hídrico, provocando efeitos tóxicos nas plantas que resultam em injúrias no metabolismo e desordens nutricionais, comprometendo assim o crescimento das plantas, resultando em menor produção. O silicato de cálcio e magnésio pode desempenhar a mesma função do calcário, além de fornecer silício para as plantas, podendo ainda, contribuir para a resistência de plantas ao estresse salino. Nesse sentido, objetivou-se com esse trabalho avaliar o efeito do silicato de cálcio e magnésio no crescimento da mamoneira BRS Energia cultivada sob condições salinas. Avaliou-se a altura da planta, diâmetro do caule, número de folhas, área foliar, massa seca da parte aérea e da raiz e as características químicas do solo. Não houve interação entre os fatores níveis de salinidade e silicato sobre as variáveis analisadas. Houve rela

  14. A survey of oil product demand elasticities for developing countries

    International Nuclear Information System (INIS)

    Dahl, Carol

    1994-01-01

    As more and more developing countries join the ranks of the rich they will consume both more oil and higher percentage of the lighter products. To satisfy this growing demand oil production and refinery capacity that can provide the right quantity and mix of products must be developed. In a companion piece, Dahl (1993) found the total demand for oil to be price inelastic (-0.34) and income elastic (1.32) These elasticities can give information on the total quantity of oil that might be demanded, the total amount of distillation capacity that might be needed and the overall increases in product prices that might be necessary to choke off demand growth. However, with this overall growth in product demand, the more the shift towards the lighter portion of the barrel, the more complex the refinery and the greater the demand for downstream capital. To provide information on this mix in developing countries in the coming years, this paper surveys the available work on econometric demand elasticities by oil product. (author)

  15. Limits to oil pricing: scenario planning as a device to understand oil price developments

    International Nuclear Information System (INIS)

    Austvik, O.G.

    1992-01-01

    This paper underlines that the politicizing of the oil market makes economics, politics and even pure warfare important elements in the formation of the price of oil. The disagreement about which theory to use to analyze the market and the bad record of oil price forecasting indicates that conventional oil market models should be critically re-assessed. The scenario planning methodology presented in this paper may be one alternative approach. SP does not overthrow any other theories of the market. But it claims that no single discipline is able to tell the whole truth about the market. The SP approach stresses and clarifies the role of uncertainty in the development of oil prices and underlines the importance of the understanding of the functioning of the market. It argues that without a cross-disciplinary approach, with an adequate choice of parameters, at the right level of in-depth discussion, the analysis may lose essential input or drown in detail. As an example of the methodology, an analysis of development of oil prices in the nineties is presented. It is shown that lower (indicated as 15-20 S/bbl) and upper (indicated as 30-40 S/bbl) limits of the price in the long run can be constructed, based on economic, political and strategic reasoning. It is also argued that short run 'shocks' outside these limits may have become less likely, because: (1) the strategic petroleum reserves (SPR) will cut off the most extreme prices above the upper limit and (2) the existence of a supply side regulator, like OPEC, will prevent prices from dropping below the lower limit for any longer period of time. Sensitivity analysis tests the 'robustness' of the approach. 10 refs., 1 fig

  16. Oil and gas developments in western Canada in 1981

    Energy Technology Data Exchange (ETDEWEB)

    Hay, P.W.; Robertson, D.C.

    1982-12-01

    In 1981 there was a marked slump in drilling activity in western Canada, resulting from the combined effects of the National Energy Program (NEP), economic recession and a worldwide oil surplus. The number of wells drilled dropped by 22% to a total of 6,904. Exploratory drilling decreased 19% to 3,074 wells, and development drilling decreased 25% to 3,830 wells. The exploratory success rate also decreased to 62% in 1981, based on 740 oil discoveries and 1,172 gas discoveries. The development success rate decreased slightly to 88%, with 1,334 oil discoveries and 2,034 gas discoveries. Average well depth increased in four of the five western areas, but total revenue from land sales plummetted to half of the previous years' record totals. Average price per hectare also dropped. In Alberta, significant exploration activity was centred in the Shekilie, Golden-Evi and West Pembina areas, while major gas discoveries were made at Whiskey and Elmworth, and oil discoveries at Tangent. No significant new discoveries were made in British Columbia or Saskatchewan, but the 1980 Manitoba oil discovery at Waskada continued to stimulate activity. Preliminary results from the Nechako Basin drilling in central British Columbia proved to be disappointing with three successive dry holes. In the Arctic Islands, two major oil discoveries were made at Skate and Cisco, off Lougheed Island and a gas discovery at MacLean. Beaufort Sea drilling was hampered by weather, but nonetheless resulted in major oil discoveries a Koakoak and at a Kopanoar follow-up well. The year 1981 will probably be viewed as a major turning point in exploration in western Canada, with interest shifting from the provinces to the frontiers, and the participants now mainly Canadian-controlled companies.

  17. Alberta's economic development of the Athabasca oil sands

    Science.gov (United States)

    Steinmann, Michael

    This dissertation examines the 61-year evolution of public policies pertaining to development of Alberta's non-conventional source of crude oil. The Athabasca oil sands contain an estimated 1.5 trillion barrels and provide for a safe continental supply. The Provincial Government first sponsored this undertaking in 1943. The period from then to 1971 was one of a transition from a wheat economy to a natural-resource economic base. A stable government emerged and was able to negotiate viable development policies. A second period, 1971 to 1986, was marked by unstable world conditions that afforded the Alberta government the ability to set terms of development with multi-national oil firms. A 50% profit-sharing plan was implemented, and basic 1973 terms lasted until 1996. However, 1986 was a critical year because the Organization of Petroleum Exporting Countries (OPEC) reduced prices, causing the Alberta economy to lapse into recession. During a third period, 1986 to 1996, the Alberta Government was unable to adapt quickly to world conditions. A new leadership structure in 1996 made major changes to create ongoing fiscal and development policies. That history provides answers to two primary research questions: How do public policies affect the behaviors of the modern corporation and visa versa? What are the implications for development theory? Two sources of information were used for this study. First, it was possible to review the Premier's files located in the Provincial Archives. Materials from various government libraries were also examined. Some 7,000 documents were used to show the evolution of government policymaking. Second, interviews with leaders of oil companies and federal research facilities were important. Findings support the thesis that, to facilitate oil sands development, government and the private sector have closely collaborated. In particular, revenue policies have allowed for effective R&D organization. Relying on intensive technological

  18. Development of a bioassay to quantify the ricin toxin content of castor bean (Ricinus communis L. seeds=Desenvolvimento de um bioensaio para quantificar o teor da toxina ricina em sementes de mamona (Ricinus communis L.

    Directory of Open Access Journals (Sweden)

    Dick Auld

    2012-10-01

    Full Text Available In this study, we developed a bioassay to quantify the ricin toxin content of castor bean seeds. Existing quantification methods do not always reflect actual toxicity of the seeds analyzed, which may present lower ricin content even though they are more toxic than seeds presenting a higher content of ricin. This is because these methods actually measure the addition of ricin RCA, which is a compound less toxic than pure ricin. We decided to use in this study, the nematode Caenorhabditis elegans, which has been widely used by the pharmaceutical industry. We tested two strains of C. elegans using different methods in 8 experiments. We examined 4 methods of extracting the ricin complex and 3 methods of exposing the nematodes. Among the nematode strains and ricin extraction methods tested, we concluded that the best strain for testing ricin toxicity was the strain called N2 and that the best method for ricin extraction was a rotating bath followed by centrifugation and exposing the nematodes in 24 well plates with a solution of nematodes extracted from the media with destilated waterexposing the nematodes in 24-well plates This method is inexpensive, quick and adequate for the selection of offspring with lower RIP content.Foi desenvolvido um bioensaio para quantificar o teor de ricina nas sementes de mamona. Os métodos de quantificação existentes não refletem a toxidez real das sementes analizadas, que pode mostrar um resultado de menor teor de ricina e ainda assim ser mais toxico do que as sementes que apresentaram teores maiores. Isto ocorre por que estes métodos medem alem da ricina a RCA, que é um composto menos tóxico que a ricina pura. Foi decidido utilizar neste estudo o nematoide Caenorhabditis elegans, que tem sido amplamente utilizado na industria farmacêutica. Foram testadas duas estirpes de C.elegans usadas em diferentes métodos contando com 8 experimentos distintos. nós examinamos 4 métodos de extração de ricina e 3 m

  19. Influence of the organic matter and soil water deficit on the castor bean absolute growth rate

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda, Rogerio Dantas de; Guerra, Hugo O. Carvallo; Chaves, Lucia Helena G. [Universidade Federal de Campina Grande (UAEAg/UFCG), PB (Brazil). Unidade Academica de Engenharia Agricola; Araujo, Ester Luiz de; Nascimento, Elka Costa Santos; Barros Junior, Genival [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

    2008-07-01

    Even when under low precipitations conditions, the castor bean production decrease, it constitutes a very good alternative. It has an elevated economical importance, because from the plant it is used their leaves, stem and seeds. From the stem it is obtained cellulose for the paper industry, from the leaves textile products and from the seeds oil and tort. The oil is the only glycerin soluble in alcohol and the base for several industrial products such as the biodiesel. The objective of the present work was to study the effect of different soil water and soil organic matter on the castor bean, BRS 188 cultivar rate growth. The experiment was conducted from April to August 2006 under greenhouse conditions using a randomized block 2x4 factorial design with two soil organic mater content (5.0 g.kg{sup -1} e 25.0 g.kg{sup -1}), four levels of available water (100, 90, 80 e 70% ) and three replicates. For this, 24 plastic containers, 75 kg capacity, were used on which was grown one plant 120 days after the seedling. At regular intervals the plant height was measured and the results analyzed statistically. For the qualitative treatments (with and without organic matter) the treatment means were compared through the Tukey test. For the quantitative ones (water levels) regressions were used. It was observed that both, organic matter and available water for plants proportionated benefit effects to the growth rate of the plant. (author)

  20. Oil sands development in a carbon constrained world

    Energy Technology Data Exchange (ETDEWEB)

    McDougall, J. [Alberta Research Council, Devon, AB (Canada)

    2006-07-01

    The challenges facing oilsands development in Alberta were discussed in this PowerPoint presentation. In 2005, 71 per cent of Alberta's export value was derived from energy and mining. The author addressed the issue that resource based economies have rarely succeeded in the long term. He then demonstrated how such economies could capture value from technology. The primary focus was on the goal to develop and adapt greenhouse gas (GHG) transformational technologies that will break the link between hydrocarbon energy use and GHG emissions. The role of oil sands in this endeavour was also discussed. Alberta's oil sands are the world's largest hydrocarbon resource, with 315 b bbls proven reserves, and 2.5 t bbls potential reserves. As an important economic driver for Alberta, oil sands production is expected to grow significantly in the next 2 decades. Since bitumen production is more energy intensive than conventional oil, the industry is faced with the challenge of sustainable development. Concentrated GHG emissions create opportunities to proceed with long-term oil sands development with a sustainable level of GHG emissions, but technology and infrastructure are needed to take advantage of them. Current carbon dioxide (CO{sub 2}) storage projects in Alberta were highlighted. The economic potential of geological storage of CO{sub 2} through acid gas injection or deep disposal was discussed in terms of enhanced oil recovery, enhanced coalbed methane recovery, enhanced gas recovery and cost avoidance of CO{sub 2} per tonne. It was emphasized that a long-term vision and commitment is needed to balance with short term problems solving and longer-term strategic agendas. tabs., figs.

  1. Development of a synthetic pathway for a sustainable plasticizer

    DEFF Research Database (Denmark)

    Søndergaard, Helle

    monooleate originating from sunflower oil. Sunflower oil is less expensive and more accessible compared to castor oil and the SNS-A has been tested to have the same plasticizing effect and non-toxic effects as SNS. However, a sustainable and cheap way of synthesizing SNS-A has not been developed. The aim...... and three different catalysts, known to be efficient in CTH reactions. However, no satisfying results were obtained using CTH as a hydrogenation method. Using molecular hydrogen gas for hydrogenation also resulted in problems. The hydrogenation of the epoxide obtained from epoxidation with peracetic acid...

  2. Policy Analysis of Water Availability and Use Issues for Domestic Oil Shale and Oil Sands Development

    Energy Technology Data Exchange (ETDEWEB)

    Ruple, John [Univ. of Utah, Salt Lake City, UT (United States); Keiter, Robert [Univ. of Utah, Salt Lake City, UT (United States)

    2010-03-01

    Oil shale and oil sands resources located within the intermountain west represent a vast, and as of yet, commercially untapped source of energy. Development will require water, and demand for scarce water resources stands at the front of a long list of barriers to commercialization. Water requirements and the consequences of commercial development will depend on the number, size, and location of facilities, as well as the technologies employed to develop these unconventional fuels. While the details remain unclear, the implication is not – unconventional fuel development will increase demand for water in an arid region where demand for water often exceeds supply. Water demands in excess of supplies have long been the norm in the west, and for more than a century water has been apportioned on a first-come, first-served basis. Unconventional fuel developers who have not already secured water rights stand at the back of a long line and will need to obtain water from willing water purveyors. However, uncertainty regarding the nature and extent of some senior water claims combine with indeterminate interstate river management to cast a cloud over water resource allocation and management. Quantitative and qualitative water requirements associated with Endangered Species protection also stand as barriers to significant water development, and complex water quality regulations will apply to unconventional fuel development. Legal and political decisions can give shape to an indeterminate landscape. Settlement of Northern Ute reserved rights claims would help clarify the worth of existing water rights and viability of alternative sources of supply. Interstate apportionment of the White River would go a long way towards resolving water availability in downstream Utah. And energy policy clarification will help determine the role oil shale and oil sands will play in our nation’s future.

  3. Development of Motorized Oil Palm Fruit Rotary Digester | Asoiro ...

    African Journals Online (AJOL)

    A motorized oil palm fruit rotary digester comprising of a feed hopper, hammers, axle, screening plate, v-belt, 2hp electric motor, digesting chamber and frame was designed and developed using standard and locally sourced materials. The performance test analysis showed that its throughput capacity is 117.93kg/hr with a ...

  4. Developing a strawberry yogurt fortified with marine fish oil

    Science.gov (United States)

    Fortified dairy products appeal to a wide variety of consumers and have the potential to increase sales in the yogurt industry and contribute to boost the intake of omega-3 fatty acids. The objectives of this study were to develop a strawberry yogurt containing microencapsulated salmon oil (2% w/v) ...

  5. Canadian oilsands, heavy oil poised for surge in development

    International Nuclear Information System (INIS)

    Anon.

    1996-01-01

    Operators in Canada's oilsands and heavy oil regions are on the brink of a period of growth that could last well into the next century. Several factors are combining in a scenario a National Task Force report on oilsands says could dramatically increase investment and production in the next 25 years. By then, massive oilsands and heavy oil reserves in northern Alberta could account for as much as 50%--perhaps more--of Canada's oil production. Technological improvements in recovery and processing have slashed production costs and put nonconventional oil on a more competitive footing with declining reserves of conventional crude in western Canada. At the same time, persistent lobbying by industry and a well researched national study have persuaded federal and provincial governments to introduce a new royalty and fiscal regime designed to bolster oilsands investment. New policies give clear incentives to investors to put money into oilsands and heavy oil projects. Policies also will provide a generic tax treatment for all new projects, long a major objective of oilsands promoters. Previously, royalty and tax agreements were negotiated for project case by case. This paper reviews the resource base and the new operational developments resulting from these policies

  6. EFFICACY OF VEGETABLE OILS AGAINST DRY BEAN BEETLES ...

    African Journals Online (AJOL)

    ACSS

    highest dose (9 ml kg-1) with castor oil and cottonseed oil, respectively. The lowest LC50 value of ... restrictions on use of insecticides, awareness of environmental pollution, the .... more plant materials such as neem oil for use in insect pest ...

  7. Utilization of some non-edible oil for biodiesel production ...

    African Journals Online (AJOL)

    In this work, the production of biodiesel from four sources of non-edible oils, namely jatropha, animal fat, waste vegetable oil and castor oil was carried out. It was done using an acid esterification process followed by alkali transesterification in the laboratory. Subsequently the physicochemical properties for four blends B100 ...

  8. Analysis of the environmental control technology for oil shale development

    Energy Technology Data Exchange (ETDEWEB)

    de Nevers, N.; Eckhoff, D.; Swanson, S.; Glenne, B.; Wagner, F.

    1978-02-01

    The environmental control technology proposed in the various oil shale projects which are under development are examined. The technologies for control of air pollution, water pollution, and for the disposal, stabilization, and vegetation of the processed shale were thoroughly investigated. Although some difficulties may be encountered in any of these undertakings, it seems clear that the air and water pollution problems can be solved to meet any applicable standard. There are no published national standards against which to judge the stabilization and vegetation of the processed shale. However, based on the goal of producing an environmentally and aesthetically acceptable finished processed shale pile, it seems probable that this can be accomplished. It is concluded that the environmental control technology is available to meet all current legal requirements. This was not the case before Colorado changed their applicable Air Pollution regulations in August of 1977; the previous ones for the oil shale region were sufficiently stringent to have caused a problem for the current stage of oil shale development. Similarly, the federal air-quality, non-deterioration regulations could be interpreted in the future in ways which would be difficult for the oil shale industry to comply with. The Utah water-quality, non-deterioration regulations could also be a problem. Thus, the only specific regulations which may be a problem are the non-deterioration parts of air and water quality regulations. The unresolved areas of environmental concern with oil shale processing are mostly for the problems not covered by existing environmental law, e.g., trace metals, polynuclear organics, ground water-quality changes, etc. These may be problems, but no evidence is yet available that these problems will prevent the successful commercialization of oil shale production.

  9. Role of biotechnological interventions in the improvement of castor (Ricinus communis L.) and Jatropha curcas L.

    Science.gov (United States)

    Sujatha, M; Reddy, T P; Mahasi, M J

    2008-01-01

    Castor and Jatropha belong to the Euphorbiaceae family. This review highlights the role of biotechnological tools in the genetic improvement of castor and jatropha. Castor is monotypic and breeding programmes have mostly relied on the variability available in the primary gene pool. The major constraints limiting profitable cultivation are: vulnerability to insect pests and diseases, and the press cake is toxic which restrict its use as cattle feed. Conventional breeding techniques have limited scope in improvement of resistance to biotic stresses and in quality improvement owing to low genetic variability for these traits. Genetic diversity was assessed using protein based markers while use of molecular markers is at infancy. In vitro studies in castor have been successful in shoot proliferation from meristematic explants, but not callus-mediated regeneration. Genetic transformation experiments have been initiated for development of insect resistant and ricin-free transgenics with very low transformation frequency. In tropical and subtropical countries jatropha is viewed as a potential biofuel crop. The limitations in available germplasm include; lack of knowledge of the genetic base, poor yields, low genetic diversity and vulnerability to a wide array of insects and diseases. Great scope exists for genetic improvement through conventional methods, induced mutations, interspecific hybridization and genetic transformation. Reliable and highly efficient tissue culture protocols for direct and callus-mediated shoot regeneration and somatic embryogenesis are established for jatropha which indicates potential for widening the genetic base through biotechnological tools. Assessment of genetic diversity using molecular markers disclosed low interaccessional variability in local Jatropha curcas germplasm. The current status and future prospects of in vitro regeneration, genetic transformation and the role of molecular tools in the genetic enhancement of the two

  10. Integrated Bali Cattle Development Model Under Oil Palm Plantation

    Directory of Open Access Journals (Sweden)

    Rasali Hakim Matondang

    2015-09-01

    Full Text Available Bali cattle have several advantages such as high fertility and carcass percentage, easy adaptation to the new environment as well. Bali cattle productivity has not been optimal yet. This is due to one of the limitation of feed resources, decreasing of grazing and agricultural land. The aim of this paper is to describe Bali cattle development integrated with oil palm plantations, which is expected to improve productivity and increase Bali cattle population. This integration model is carried out by raising Bali cattle under oil palm plantation through nucleus estate scheme model or individual farmers estates business. Some of Bali cattle raising systems have been applied in the integration of palm plantation-Bali cattle. One of the intensive systems can increase daily weight gain of 0.8 kg/head, calfcrop of 35% per year and has the potency for industrial development of feed and organic fertilizer. In the semi-intensive system, it can improve the production of oil palm fruit bunches (PFB more than 10%, increase harvested-crop area to 15 ha/farmer and reduce the amount of inorganic fertilizer. The extensive system can produce calfcrop ³70%, improve ³30% of PFB, increase business scale ³13 cows/farmer and reduce weeding costs ³16%. Integrated Bali cattle development may provide positive added value for both, palm oil business and cattle business.

  11. Development of hydrate risk quantification in oil and gas production

    Science.gov (United States)

    Chaudhari, Piyush N.

    Subsea flowlines that transport hydrocarbons from wellhead to the processing facility face issues from solid deposits such as hydrates, waxes, asphaltenes, etc. The solid deposits not only affect the production but also pose a safety concern; thus, flow assurance is significantly important in designing and operating subsea oil and gas production. In most subsea oil and gas operations, gas hydrates form at high pressure and low temperature conditions, causing the risk of plugging flowlines, with a undesirable impact on production. Over the years, the oil and gas industry has shifted their perspective from hydrate avoidance to hydrate management given several parameters such as production facility, production chemistry, economic and environmental concerns. Thus, understanding the level of hydrate risk associated with subsea flowlines is an important in developing efficient hydrate management techniques. In the past, hydrate formation models were developed for various flow-systems (e.g., oil dominated, water dominated, and gas dominated) present in the oil and gas production. The objective of this research is to extend the application of the present hydrate prediction models for assessing the hydrate risk associated with subsea flowlines that are prone to hydrate formation. It involves a novel approach for developing quantitative hydrate risk models based on the conceptual models built from the qualitative knowledge obtained from experimental studies. A comprehensive hydrate risk model, that ranks the hydrate risk associated with the subsea production system as a function of time, hydrates, and several other parameters, which account for inertial, viscous, interfacial forces acting on the flow-system, is developed for oil dominated and condensate systems. The hydrate plugging risk for water dominated systems is successfully modeled using The Colorado School of Mines Hydrate Flow Assurance Tool (CSMHyFAST). It is found that CSMHyFAST can be used as a screening tool in

  12. Developing product quality standards for wheelchairs used in less-resourced environments

    Directory of Open Access Journals (Sweden)

    Anand Mhatre

    2017-09-01

    Conclusion: The study findings indicate the need to develop a wide range of tests, with specific tests for measuring corrosion resistance of the entire wheelchair, rolling resistance of castors and rear wheels, and durability of whole wheelchair and castor assemblies.

  13. Biodegradation of used lubricating and diesel oils by a new yeast ...

    African Journals Online (AJOL)

    A new yeast strain, identified by 18S-rRNA gene sequencing as Candida viswanathii KA-201l, was isolated from used lubricating oil, showed high biodegradation efficiency for different used lubricating oils. Capability of this isolate to degrade different high and low molecular weight hydrocarbons, castor oil, diesel oil and ...

  14. Geophysics comes of age in oil sands development

    Energy Technology Data Exchange (ETDEWEB)

    Bauman, P. [WorleyParsons Komex, Calgary, AB (Canada); Birch, R.; Parker, D.; Andrews, B. [Calgary Univ., AB (Canada). Dept. of Geology and Geophysics

    2008-07-01

    This paper discussed geophysical techniques developed for oil sands exploration and production applications in Alberta's oil sands region. Geophysical methods are playing an important role in mine planning, tailings containment, water supply, and land reclamation activities. Geophysics techniques are used to estimate the volume of muskeg that needs to be stripped and stored for future reclamation activities as well as to site muskeg piles and delineate the thickness of clay Clearwater formations overlying Cretaceous oil-bearing sands. 2-D electrical resistivity mapping is used to map river-connected deep bedrock Pleistocene paleovalleys in the region. Geophysical studies are also used to investigate the interiors of dikes and berms as well as to monitor salt migration within tailings piles. Sonic and density logs are used to create synthetic seismograms for mapping the Devonian surface in the region. The new applications included the calculation of bitumen saturation from surface sands and shales; muskeg thickness mapping; and non-intrusive monitoring of leachate plumes. Geophysical techniques included 2-D electrical resistivity imaging; transient electromagnetic (EM) technologies; ground penetrating radar; and high-resolution seismic reflections. Polarization, surface nuclear magnetic resonance and push-probe sensing techniques were also discussed. Techniques were discussed in relation to Alberta's Athabasca oil sands deposits. 4 refs.

  15. Development of building blocks using vegetable oil and recycled aggregate

    Directory of Open Access Journals (Sweden)

    Attia Mohamed I.

    2017-01-01

    Full Text Available The primary objective of this research was to contribute towards greater sustainability of the construction industry in the Qatar by proposing methods to reduce its dependency on primary imported materials. In this investigation, recycled and secondary aggregates (RSA were combined with non-traditional binders to develop a unique method of manufacturing construction and building blocks. Following an extensive phase of laboratory trials and experimentation, it was realised that many types of graded mineral aggregates, when mixed with vegetable oils (virgin or waste at optimal proportions, then compacted and thermally cured at elevated temperatures can readily generate hardened composites that have the mechanical characteristics of conventional building blocks. The resultant blocks have been named “Vegeblocks” and are viewed as viable alternatives to conventional concrete blocks. Furthermore, the research has demonstrated the feasibility of producing Vegeblocks composed of 100% recycled aggregate and discarded waste cooking oil. Based on physical and mineralogical properties, each type of aggregate has an optimum oil content for maximum compressive strength, beyond which, any additional oil will result in reduction in mechanical properties. Acceptable compressive strength values were achieved by thermally curing Vegeblocks at of 170 °C for 24 hours.

  16. Production of bran castor biochar through slow pyrolysis

    Science.gov (United States)

    Pissinati de Rezende, E. I.; Mangrich, A. S.; Batista, M. G. F.; Toledo, J. M. S.; Novotny, E. H.

    2012-04-01

    Pyrolysis is a thermal process of great importance in the present context, since it constitutes a significant alternative to adequate use of organic waste. The principal products obtained in the pyrolysis of discarded biomass are bio-oil, biogas and biochar. Biochar, in turn, may play a relevant role when applied to the soil to sequester carbon and as a soil conditioner, a material comparable to organic matter of Indians Black Earths from the Amazon Region [1]. Seeking to determine the best methods of preparation of biochar, we studied the pyrolysis of bran castor residue of the Brazilian biodiesel industry. Eight samples, from FM1 to FM8, were prepared in a factorial design 23 using two temperature (300 and 350 °C), two heating velocity (5 and 10 °C min-1) and two period of heating (30 and 60 min). The eight samples were studied using the spectroscopy: EPR, FTIR, RMN, XPS, and elemental analysis. By elemental analysis, the samples that keep for lower temperature of pyrolysis, 300 °C, showed H/C and N/C ratios greater than the samples of 350 °C. That higher value can be attributed to chemical structure more aliphatic than aromatic mainly in the FM7 sample (V = 10 °C min-1, T = 300 °C, P = 30 min). The greater N/C ratio correlated with a superior amount of nitrogenous functions, presenting by both FM7 and FM4 samples, as determined by 13C NMR spectroscopy with absorptions in 175 ppm (amide) and 55 ppm (N-alkyl).

  17. The value of flexibility in offshore oil field development projects

    Energy Technology Data Exchange (ETDEWEB)

    Lund, Morten Wattengaard

    1997-12-31

    Offshore oil field development projects often face substantial uncertainties and the operator`s ability to take corrective actions is very important. The main objective of this thesis was to identify the value of flexibility in such projects. Estimates obtained from exploratory wells can be dependent through common information. The effect of stochastic dependence was illustrated by an analytical model, where the dependence was expressed in terms of correlation between estimate errors. It was found that a high degree of correlation might distort the benefit of additional exploration. A prototype that covered the major phases of the project was developed to study the value of flexibility. The prototype was a Markov decision process, solved by stochastic dynamic programming. Based on discussions with Norwegian oil companies, three uncertain variables were addressed: the reservoir volume, the well rate, and the oil price. Simple descriptions were used to mimic the uncertainty. The reservoir was thus depicted as a tank model, and the well rate and oil prices were assumed to follow Markov processes. Flexibility was restricted to managerial as opposed to financial flexibility. Application of the prototype to a case study, based on an ongoing field development, showed that flexibility might be of considerable value to the project. In particular, capacity flexibility and initiation flexibility were identified as important aspects of the development. The results also emphasized the importance of a joint assessment, as the values of different flexibility types are not additive. In conclusion, the proposed model motivates further development of the decision support system presently available. Future decision making should therefore be made within a framework that gives consideration to flexibility. 129 refs., 46 figs., 23 tabs.

  18. ALASKA OIL AND GAS EXPLORATION, DEVELOPMENT, AND PERMITTING PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Richard McMahon; Robert Crandall; Chas Dense; Sean Weems

    2003-08-04

    The objective of this project is to eliminate three closely inter-related barriers to oil production in Alaska through the use of a geographic information system (GIS) and other information technology strategies. These barriers involve identification of oil development potential from existing wells, planning projects to efficiently avoid conflicts with other interests, and gaining state approvals for exploration and development projects. Each barrier is the result of either current labor-intensive methods or poorly accessible information. This project brings together three parts of the oil exploration, development, and permitting process to form the foundation for a more fully integrated information technology infrastructure for the State of Alaska. This web-based system will enable the public and other review participants to track permit status, submit and view comments, and obtain important project information online. By automating several functions of the current manual process, permit applications will be completed more quickly and accurately, and agencies will be able to complete reviews with fewer delays. The application will include an on-line diagnostic Coastal Project Questionnaire to determine the suite of permits required for a specific project. The application will also automatically create distribution lists based on the location and type of project, populate document templates for project review start-ups, public notices and findings, allow submission of e-comments, and post project status information on the Internet. Alaska has nearly one-quarter of the nation's supply of crude oil, at least five billion barrels of proven reserves. The American Association of Petroleum Geologists report that the 1995 National Assessment identified the North Slope as having 7.4 billion barrels of technically recoverable oil and over 63 trillion cubic feet of natural gas. From these reserves, Alaska produces roughly one-fifth of the nation's daily crude oil

  19. Demand for oil and energy in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, C. Jr.; Relles, D.A.; Navarro, J.

    1980-05-01

    How much of the world's oil and energy supply will the non-OPEC less-developed countries (NOLDCs) demand in the next decade. Will their requirements be small and thus fairly insignificant compared with world demand, or large and relatively important. How will world demand be affected by the economic growth of the NOLDCs. In this report, we try to develop some reasonable forecasts of NOLDC energy demands in the next 10 years. Our focus is mainly on the demand for oil, but we also give some attention to the total commercial energy requirements of these countries. We have tried to be explicit about the uncertainties associated with our forecasts, and with the income and price elasticities on which they are based. Finally, we consider the forecasts in terms of their implications for US policies concerning the NOLDCs and suggest areas of future research on NOLDC energy issues.

  20. Apis mellifera pollination improves agronomic productivity of anemophilous castor bean (Ricinus communis

    Directory of Open Access Journals (Sweden)

    Rômulo A.G. Rizzardo

    2012-12-01

    Full Text Available Castor bean (Ricinus communis L. is cultivated mainly for biodiesel production because of its oil-rich seeds; it is assumed to be an anemophylous species. But pollination deficit can lead to low productivity often attributed to other reasons. In this paper, we investigated pollination requirements, pollination mechanism, occurrence of pollination deficit, and the role of biotic pollinators in a large commercial plantation of castor bean. Our results show that R. communis bears a mixed breeding system favoring selfing by geitonogamy, although the wind promotes mostly outcrossing. We also found that the honey bee (Apis mellifera L. foraging on castor bean can both transfer pollen from male to female flowers within the same raceme and boost the release of airborne pollen by male flowers. Both situations increase geitonogamy rates, raising significantly fruit set and seed yield. This is the first report of an animal foraging activity increasing seed yield in an anemophilous and geitonogamous crop and elucidates the role of biotic pollinators in castor bean reproduction.A mamoneira (Ricinus communis L. é cultivada principalmente para produção de biodiesel devido ao alto teor de óleo de suas sementes e considerada como sendo de polinização anemófila. Mas déficits de polinização podem levar a baixos índices de produtividade geralmente atribuídos a outros fatores. Neste trabalho foram investigados os requerimentos, mecanismos e déficit de polinização e o papel dos polinizadores bióticos em um monocultivo comercial de mamona. Os resultados mostram que R. communis possui um sistema de polinização misto, favorecendo a autopolinização por geitonogamia, embora o vento normalmente promova polinização cruzada. Observou-se também que a abelha melífera (Apis mellifera L. forrageando na mamoneira pode tanto transferir pólen das flores estaminadas para as pistiladas do mesmo racemo, quanto aumentar consideravelmente a liberação de p

  1. Paraho oil shale module. Site development plan, Task 4

    Energy Technology Data Exchange (ETDEWEB)

    1981-10-01

    A management plan and schedule which covers all requirements for gaining access to the site and for conducting a Paraho Process demonstration program have been prepared. The oil shale available should represent a regional resource of suitable size and quality for commercial development. Discussed in this report are: proof of ownership; requirements for rights-of-way for access to the site; local zoning restrictions; water rights; site availability verification; and other legal requirements. (DMC)

  2. 75 FR 44917 - Castor Oil, Ethoxylated, Dioleate; Tolerance Exemption

    Science.gov (United States)

    2010-07-30

    ... (NAICS code 111). Animal production (NAICS code 112). Food manufacturing (NAICS code 311). Pesticide... Kingdom. The petition requested that 40 CFR 180.960 be amended by establishing an exemption from the...

  3. Comparative Analysis of Flame Characteristics of Castor Oil and ...

    African Journals Online (AJOL)

    Flame Retardants Used in Polyurethane Foam Systems. Polycarp .O. Ikeh ... combustible-clothes; furniture, construction materials .... This offers a serious resistance to bond breaking ... dense smokes containing deadly poisonous toxic gases.

  4. Synthesis and characterization of castor oil-based polyurethane for ...

    Indian Academy of Sciences (India)

    Administrator

    2School of Chemical Sciences and Food Technology, Faculty of Science and Technology,. Universiti Kebangsaan .... (THF) were supplied by R&M Marketing, Essex, UK, while 4 ... thoroughly with MDI using a digital magnetic stirrer at.

  5. Early Stage Design of a Bio refinery from Castor Oil

    DEFF Research Database (Denmark)

    de Faria, Daniela; Quaglia, Alberto; Pessoa, Fernando

    2014-01-01

    This paper presents a systematic method fo r synthesis and analysis of bio mass based biorefinery pathways (process networks) in terms of current and future market conditions. The systematic method has been implemented into a computer aided tool that is able to quickly evaluate alternatives...

  6. ALASKA OIL AND GAS EXPLORATION, DEVELOPMENT, AND PERMITTING PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Richard McMahon; Robert Crandall; Chas Dense; Sean Weems

    2003-11-19

    This is the second technical report, covering the period from April 1, 2003 through September 30, 2003. This project brings together three parts of the oil exploration, development, and permitting process to form the foundation for a more fully integrated information technology infrastructure for the State of Alaska. The geo-technical component is a shared effort between the State Department of Administration and the US Department of Energy. The Alaska Oil and Gas Conservation Commission is rapidly converting high volumes of paper documents and geo-technical information to formats suitable for search and retrieval over the Internet. The permitting component is under the lead of the DNR Office of Project Management and Permitting. A web-based system will enable the public and other review participants to track permit status, submit and view comments, and obtain important project information on-line. By automating several functions of the current manual process, permit applications will be completed more quickly and accurately, and agencies will be able to complete reviews with fewer delays. Structural changes are taking place in terms of organization, statutory authority, and regulatory requirements. Geographic Information Systems are a central component to the organization of information, and the delivery of on-line services. Progress has been made to deploy the foundation system for the shared GIS based on open GIS protocols to the extent feasible. Alaska has nearly one-quarter of the nation's supply of crude oil, at least five billion barrels of proven reserves. The American Association of Petroleum Geologists report that the 1995 National Assessment identified the North Slope as having 7.4 billion barrels of technically recoverable oil and over 63 trillion cubic feet of natural gas. From these reserves, Alaska produces roughly one-fifth of the nation's daily crude oil production, or approximately one million barrels per day from over 1,800 active wells.

  7. Effect of the organic matter and soil water deficit on the castor bean inflorescences emission

    Energy Technology Data Exchange (ETDEWEB)

    Lacerda, Rogerio Dantas de; Araujo, Ester Luiz de; Nascimento, Elka Costa Santos; Barros Junior, Genival [Universidade Federal de Campina Grande (UFCG), PB (Brazil); Guerra, Hugo O. Carvallo; Chaves, Lucia Helena G. [Universidade Federal de Campina Grande (UAEAg/UFCG), PB (Brazil). Unidade Academica de Engenharia Agricola

    2008-07-01

    The castor bean culture has become important due to the several applications of its oil, which constitutes one of the best row materials for biodiesel manufacturing, and the base for several other industrial products. The objective of the present work was to study the effect of different soil water and soil organic matter on the castor bean inflorescence emission. The experiment was conducted from April to August 2006 under Greenhouse conditions using a randomized block 2x4 factorial design with two soil organic mater content (5.0 g.kg{sup -1} e 25.0 g.kg{sup -1}), four levels of available water (100, 90, 80 e 70% ) and three replicates. For this, 24 plastic containers, 75 kg capacity, were used on which was grown one plant 120 days after the seedling. When flowering occurred it was measured the number, the time required for the emission and the height of the emissions. The results were analyzed statistically; for the qualitative factor (with and without organic matter) the treatment means were compared through the Tukey test. For the quantitative ones (water levels) regressions were used. The time for the emission of the inflorescences was affected significantly by the organic matter and the available soil water content for plants. The number of inflorescences was affected positively by both treatments. (author)

  8. Environmentally safe oil-field reagents for development and operation of oil-gas deposits

    Science.gov (United States)

    Fakhreeva, A. V.; Manaure, D. A.; Dokichev, V. A.; Voloshin, A. I.; Telin, A. G.; Tomilov, Yu V.; Nifantiev, N. E.

    2018-04-01

    Sodium-carboxymethylcellulose and arabinogalactane inhibits the crystallization of calcium carbonate from a supersaturated aqueous solution at 80°C. The sizes of formed crystals CaCO3 in the presence of arabinogalactane, sodium-carboxymethylcellulose and neonol AF 9-10 decrease on an average 7-12 μm and a change of their structure. It is expected, that the mechanism of inhibitionis in specific adsorption polysaccharides and neonol on occurring crystalline surface of the calcium carbonate, both at the expense of electrostatic interaction of functional groups with Ca2+ ions, located on the surface of the crystal, and due to coordination and hydrogen bonds with oxygen atoms and HO-groups of additives. Oil-water emulsion rheology in the presence of neonol AF 9-10 has been studied. It is shown that neonol AF 9-10 decrease viscosity natural water-oil emulsion by 25 times. Addition of 5% neonol to water-oil emulsion leads to formation more than 20 stable emulsion forms of different density and composition. New highly effective “green” oilfield reagents have been developed on the basis of neonol and natural polysaccharides.

  9. Characterisation of Castor (Ricinus communis L. Seed Quality Using Fourier Transform Near-Infrared Spectroscopy in Combination with Multivariate Data Analysis

    Directory of Open Access Journals (Sweden)

    René Gislum

    2018-04-01

    Full Text Available The potential of single-seed near-infrared (NIR spectroscopy was investigated to characterise castor seeds based on their seed viability and seed oil content. Distinct differences between viable and non-viable seeds were observed in the principal component analysis (PCA analysis. Furthermore, the PCA compared heavy and medium seeds with light seeds, which were comparable to the clusters of viable and non-viable seeds, respectively. Prediction accuracies of 98.7% and 99.6% were obtained with the partial least squares discriminant analysis (PLS-DA model with a classification error rate of 0.8% and 1.1% for the training set and test set, respectively. The NIR spectral regions having chemical information from the oil in castor seeds were found to be vital for determination of seed viability.

  10. Oil and gas development on the Metis settlements of Alberta

    Energy Technology Data Exchange (ETDEWEB)

    Ghostkeeper, E.N. [Metis Settlements General Council, Edmonton, AB (Canada); Goldie, D. [First Street Law Office, Edmonton, AB (Canada)

    2003-07-01

    This paper presents a brief history of the Alberta Metis Settlements. In 1990, the Metis Settlement Act defined the Metis as a people of Aboriginal ancestry. The mandate of the Alberta Federation of Metis Settlement Associations is to protect settlement lands, and to take legal action against the province for alleged improper handling of subsurface resource revenues regarding the Metis Population Betterment Trust Fund. The Federation also attains local government authority for the Settlements. The Metis resources include game farming and alternative livestock, oil and gas, diamonds, forestry, and agriculture. The main source of economic development is in the oil and gas sector. Before the 1990 Metis Settlement Accord, the only money earned by the Metis from oil and gas development was through employment and surface rights compensation. No benefits were derived from royalties or participation. Since 1990, 265 wells have been drilled on settlement lands, with participation of the Metis General Council in 136 wells. This paper presents the terms of the Metis Development Agreement with reference to: royalties; General Council's participation rights; operating procedures; disposition of production; and, general matters. 6 figs.

  11. Abnormal development of Dentalium due to the Amoco Cadiz oil spill

    NARCIS (Netherlands)

    Koster, A.SJ.; Biggelaar, J.A.M. van den

    A comparison was made between the development of Dentalium eggs, spawned by animals, collected before and after the Amoco Cadiz oil spill. Development of eggs from animals collected before the oil spill was significantly better than development of eggs from animals collected after the oil spill. It

  12. Development challenges of resource-rich countries: the case of oil ...

    African Journals Online (AJOL)

    This paper discusses some of the challenges that confront oil-rich developing countries in their development quest. It stresses that one of the surest ways governments in oil-rich developing countries have at their disposal to avoid the so-called curse of oil is through the insulation of fiscal policy from the volatility associated ...

  13. In-vitro regeneration of castor bean (ricinus communis, L) and physic nut (jatropha curcas, L.)

    International Nuclear Information System (INIS)

    Afful, N. T.

    2008-06-01

    Investigations were conducted on in vitro regeneration of physic nut (Jatropha curcas, 1.) and castor bean (Ricinus communis, 1.) using zygotic embryo culture, shoot tip and meristem culture as well as somatic embryogenesis. Zygotic embryos from different stages of fruit maturity cultured on Murashige and Skoog (MS) medium supplemented with benzylaminopurine (BAP), kinetin and 2-isopentyl (2iP) produced vigorous seedlings with roots. However the optimal concentration of cytokinin for seedling development depended on the type cytokinin as well as the maturity stage of the fruit. Embryos from yellow fruits of Jatropha had the highest germination (100%) on an MS medium supplemented with 0.5 mg/L kinetin or 1 mg/L BAP while in Ricinus embryos from black fruits had the highest percentage germination (97%) on an MS medium modified with I mg/L 2iP or 0.5 or I mg/L BAP. Decrease in embryo viability especially in Jatropha as the seed matured may be due to high oil content in matured (black) fruit. Oil content in both Jatropha and Ricinus increased as the fruit matured from green to black and this may have effect on germination of zygotic embryos. In vitro culture response of shoot tip or meristem was significantly influenced by the concentration of growth regulators in the culture medium as well as the plant species. In both plant species, 2iP resulted in highest percentage shoot regeneration. The optimal concentration of 2iP was 0.5 mg/L for Ricinus shoot tip and 1.5 or 2.0 mg/L for Jatropha, indicating genotypic difference between the species. However excessive callus formation and browning in Ricinus led to the loss of all the regenerants. Shoot regeneration from meristem explants was also influenced by growth regulators with 2iP again being the best. Cultures of cotyledon and leaf lobe explants on MS medium supplemented with 2, 4-D and picloram resulted in callus induction with the exception of cotyledons obtained from black fruits. However transfer of calli onto fresh

  14. The Optimum Selection and Drawing Output Program Development of Shell and Tube Type Oil Cooler

    International Nuclear Information System (INIS)

    Lee, Y. B.; Kim, T. S.; Ko, J. M

    2007-01-01

    Shell and Tube type Oil Cooler is widely used for hydraulic presses, die casting machines, generation equipments, machine tools and construction heavy machinery. Temperature of oil in the hydraulic system changes viscosity and thickness of oil film. They have a bad effect to performance and lubrication of hydraulic machinery, so it is important to know exactly the heat exchanging efficiency of oil cooler for controlling oil temperature. But most Korean manufacturers do not have test equipment for oil cooler, so they cannot carry out the efficiency test of oil cooler and it is impossible to verify its performance. This paper includes information of construction of necessary utilities for oil cooler test and design and manufacture of test equipment. One can select the optimum product by obtaining performance data through tests of various kinds of oil coolers. And also the paper developed a program which can be easily used for design of 2D and 3D drawings of oil cooler

  15. Development of a practical methodology for integrating shoreline oil-holding capacity into modeling

    International Nuclear Information System (INIS)

    Schmidt Etkin, D.; French-McCay, D.; Rowe, J.; Michel, J.; Boufadel, M.; Li, H.

    2008-01-01

    The factors that influence the behaviour of oil in the aftermath of an oil spill on water include oil type and characteristics; oil thickness on the shoreline; time until shoreline impact; timing with regards to tides; weathering during and after the spill; and nearshore wave energy. The oil behaviour also depends on the shoreline characteristics, particularly porosity and permeability. The interactions of spilled oil with sediments on beaches must be well understood in order to model the oil spill trajectory, fate and risk. The movement of oil can be most accurately simulated if the algorithm incorporates an estimate of shoreline oil retention. This paper presented a literature review of relevant shoreline oiling studies and considered the relevance of study findings for inclusion in modelling. Survey data from a detailed shoreline cleanup assessment team (SCAT) were analyzed for patterns in oil penetration and oil-holding capacity by shoreline sediment type and oil type for potential use in modelling algorithms. A theoretical beach hydraulics model was then developed for use in a stochastic spill model. Gaps in information were identified, including the manner in which wave action and other environmental variables have an impact on the dynamic processes involved in shoreline oiling. The methodology presented in this paper can be used to estimate the amount of oil held by a shoreline upon impact to allow a trajectory model to more accurately project the total spread of oil. 27 refs., 13 tabs., 3 figs

  16. Future of oil and gas development in the western Amazon

    International Nuclear Information System (INIS)

    Finer, Matt; Babbitt, Bruce; Novoa, Sidney; Ferrarese, Francesco; Pappalardo, Salvatore Eugenio; Marchi, Massimo De; Saucedo, Maria; Kumar, Anjali

    2015-01-01

    The western Amazon is one of the world’s last high-biodiversity wilderness areas, characterized by extraordinary species richness and large tracts of roadless humid tropical forest. It is also home to an active hydrocarbon (oil and gas) sector, characterized by operations in extremely remote areas that require new access routes. Here, we present the first integrated analysis of the hydrocarbon sector and its associated road-building in the western Amazon. Specifically, we document the (a) current panorama, including location and development status of all oil and gas discoveries, of the sector, and (b) current and future scenario of access (i.e. access road versus roadless access) to discoveries. We present an updated 2014 western Amazon hydrocarbon map illustrating that oil and gas blocks now cover 733 414 km 2 , an area much larger than the US state of Texas, and have been expanding since the last assessment in 2008. In terms of access, we documented 11 examples of the access road model and six examples of roadless access across the region. Finally, we documented 35 confirmed and/or suspected untapped hydrocarbon discoveries across the western Amazon. In the Discussion, we argue that if these reserves must be developed, use of the offshore inland model—a method that strategically avoids the construction of access roads—is crucial to minimizing ecological impacts in one of the most globally important conservation regions. (letter)

  17. Development and characterization of evening primrose (Oenothera biennis oil nanoemulsions

    Directory of Open Access Journals (Sweden)

    Railane F. Rodrigues

    Full Text Available AbstractEvening primrose (Oenothera biennis L., Onagraceae seeds oil has great economic importance due to its wide industrial application, mainly for medicines and nutraceutics. However, to our knowledge, it remains almost unexplored regarding development of innovative formulations, such as nanoemulsions. On the present study, required Hydroprophile–Lipophile Balance of evening primrose seeds oil was determined (HLB 12 and a stable nanoemulsion (Day 1: mean droplet size: 214.3 ± 0.69 nm, polydispersity index: 0.253 ± 0.012. Day 7: mean droplet size: 202.8 ± 0.23 nm, polydispersity index: 0.231 ± 0.008 was achieved. Moreover, pseudo-ternary diagram allowed delimitation of nanoemulsion region, contributing to nanobiotechnology of natural products.

  18. The effect of the 2010 Gulf oil spill on public attitudes toward offshore oil drilling and wind development

    International Nuclear Information System (INIS)

    Lilley, Jonathan; Firestone, Jeremy

    2013-01-01

    In April 2010, the Deepwater Horizon oil well exploded, releasing over four million barrels of oil into the Gulf of Mexico. This paper presents data from two national mail surveys undertaken in 2008 and 2010 that compare public attitudes to both offshore oil drilling and offshore wind development pre- and post-spill. The results show that while there was a drop in support for expanded drilling (from 66% in 2008 to 59% in 2010) the change was not significant. There was, however, a significant decrease in support for offshore drilling among coastal residents. There was a slight, non-significant increase in support for offshore wind development which remained significantly higher than support for offshore oil (80% in 2008 and 82% in 2010). Despite there being no significant change in overall support levels, there was a shift in the strength of feeling regarding offshore oil, with 80% of Americans either less supportive or more opposed to expanded drilling in 2010 than they were in 2008. -- Highlights: •We assess whether the Gulf oil spill affected attitudes to offshore energy. •Overall support for offshore wind (82%) was greater than for offshore oil (59%). •Support for expanded offshore oil drilling decreased but not significantly. •Support for offshore wind development increased slightly, again not significantly. •Although overall support levels did not change, the strength of feeling did

  19. Physical aspects of crude oil spills on northern terrain. Task Force on Northern Oil Development, Report No. 74-25

    Energy Technology Data Exchange (ETDEWEB)

    Mackay, D; Charles, M E; Phillips, C R

    1974-01-01

    The physical aspects of crude oil spills on the terrain of the Mackenzie Valley were investigated. The aqueous solubility of Norman Wells crude oil has been determined and it has been established that about half of the dissolved hydrocarbon is aromatic. The distribution of hydrocarbons between the oil and aqueous phases is in good agreement with predicted values. The permeability of the surface terrain to oil at Norman Wells was found to decrease very rapidly with depth below the surface. A simple, in-situ method for determination of the profile was developed. The implication of the results is that flow will occur more readily near the surface than near the basement. The spreading rates of two crude oils on water were studied on two lakes near Inuvik. Pembina crude oil showed only one spreading front, whereas Norman Wells crude oil showed a bulk front preceded by a surface-slick. Once the initial separation occurred, wind drove both fronts across the water at about 6 percent of the wind speed. The area of surface-active contamination was several times the area of the bulk oil film. The isothermal spreading of five crude oils on ice under gravity-viscous conditions was examined. The radius of the slick was found to increase linearly with the ratio (time/viscosity)/sup /sup 1///sub 5//. Surface roughness effects were negligible. An attempt has been made to predict the behavior of a 50,000 barrel oil spill in the taiga region of the Mackenzie Valley, under both summer and winter conditions. The areas affected and the amounts of hydrocarbon evaporated were predicted. These predictions are valuable in providing a scenario of an oil spill incident which will assist in assessing the environmental impact of oil spills in the Mackenzie Valley and in preparing for clean-up measures. Burning as a clean-up procedure considered in some detail. Other methods specifically designed for Arctic conditions will probably prove more satisfactory.

  20. Investigation and development of heavy oil upgrading catalysts. 3

    Energy Technology Data Exchange (ETDEWEB)

    Lee, D.K.; Lee, I.C.; Yoon, W.L.; Lee, H.T.; Chung, H.; Hwang, Y.J.; Park, S.H. [Korea Inst. of Energy Research, Taejon (Korea, Republic of)

    1995-12-01

    This study aimed at the domestic development of HDS catalysts which are most fundamental and wide-used in the petroleum refinery. In this year, some experimental works were conducted for developing the effective utilization technology of the novel dispersed-catalysts in the hydro-desulfurization of heavy oils, and improving the reaction performance of alumina-supported Mo-based hydro-treating catalysts conventionally used in most of refineries. First, it was experimentally proved that the dispersed catalysts of Co-Mo could be employed for the hydro-desulfurization of a heavy atmospheric residual oil excluding the catalyst deactivation. The utilization of a carbon-expanded reactor in combination with this dispersed catalyst system exhibited an enhanced reaction performance and provided an efficient way for the separation and recovery of the dispersed catalytic component from oils. Second, the tungsten-incorporated WCoMo/{gamma}-Al{sub 2}O{sub 3} catalyst revealed the improved catalytic performance in the various hydro-treating reactions and in the initial deactivation rates for the high pressure hydro-treatment of a heavy oil as compared with the commercial CoMo/{gamma}-Al{sub 2}O{sub 3} catalyst. This new experimental finding for the promoting role of the monomeric WO{sub 3} species in CoMo/{gamma}-Al{sub 2}O{sub 3} catalyst may be generally applicable to the Mo-based alumina-sulfide phase, higher catalytic activity, and more extended service life. (author). 101 refs., 33 figs., 18 tabs.