Towards Safer Nanomaterials

DEFF Research Database (Denmark)

Hjorth, Rune; Baun, Anders

2014-01-01

As nanomaterials become more widespread in everything from industrial processes to consumer products, concerns about human and environmental safety are being taken increasingly more seriously. In our research we are working with minimizing the impact and risks of engineered nanomaterials by looking...... or the exposure and optimally both. Examples include the 5 SAFER principles (Morose, 2010) or screenings of early warning signs (Hansen et al., 2013). Taking the full life cycle of nanomaterials into account, the principles of Green chemistry and Green engineering could also prove useful to reduce...... the environmental impact of nanomaterials (Eckelman et al., 2008). Our research interests include the feasibility of “safer-­‐by-­‐design” approaches, the production of greener nanomaterials and operationalization, adaption and creation of frameworks to facilitate safety engineering. Research and insight...

Safer operating conditions and optimal scaling-up process for cyclohexanone peroxide reaction

International Nuclear Information System (INIS)

Zang, Na; Qian, Xin-Ming; Liu, Zhen-Yi; Shu, Chi-Min

2015-01-01

Highlights: • Thermal hazard of cyclohexanone peroxide reaction was measured by experimental techniques. • Levenberg–Marquardt algorithm was adopted to evaluate kinetic parameters. • Safer operating conditions at laboratory scale were acquired by BDs and TDs. • The verified safer operating conditions were used to obtain the optimal scale-up parameters applied in industrial plants. - Abstract: The cyclohexanone peroxide reaction process, one of the eighteen hazardous chemical processes identified in China, is performed in indirectly cooled semibatch reactors. The peroxide reaction is added to a mixture of hydrogen peroxide and nitric acid, which form heterogeneous liquid–liquid systems. A simple and general procedure for building boundary and temperature diagrams of peroxide process is given here to account for the overall kinetic expressions. Such a procedure has been validated by comparison with experimental data. Thermally safer operating parameters were obtained at laboratory scale, and the scaled-up procedure was performed to give the minimum dosing time in an industrial plant, which is in favor of maximizing industrial reactor productivity. The results are of great significance for governing the peroxide reaction process apart from the thermal runaway region. It also greatly aids in determining optimization on operating parameters in industrial plants.

Parent-Adolescent Sexual Communication and Adolescent Safer Sex Behavior: A Meta-Analysis

Science.gov (United States)

Widman, Laura; Choukas-Bradley, Sophia; Noar, Seth M.; Nesi, Jacqueline; Garrett, Kyla

2016-01-01

Importance Parent-adolescent sexual communication has received considerable attention as one factor that can positively impact safer sex among youth; however, the evidence linking communication to youth contraceptive and condom use has not been empirically synthesized. Objective This meta-analysis examined the effect of parent-adolescent sexual communication on youth safer sex behavior and explored potential moderators of this association. Data Sources A systematic search was conducted of studies published through June 2014 using Medline, PsycINFO, and Communication & Mass Media Complete databases and relevant review articles. Study Selection Studies were included if they: 1) sampled adolescents (mean sample age≤18); 2) included an adolescent report of sexual communication with parent(s); 3) measured safer sex behavior; and 4) were published in English. Data Extraction and Synthesis Correlation coefficients (r) and 95% confidence intervals (CIs) were computed from studies and meta-analyzed using random-effects models. Main Outcomes and Measures The primary outcome was safer sex behavior, including use of contraceptives/birth control or condoms. Results Seventy-one independent effects representing over three decades of research on 25,314 adolescents (mean age = 15.1) were synthesized. Across studies, there was a small, significant weighted mean effect (r = .10, [95% CI:0.08–0.13]) linking parent-adolescent sexual communication to safer sex behavior, which was statistically heterogeneous (Q = 203.50, p communication with girls (r = .12) than boys (r = .04), and among youth who discussed sex with mothers (r = .14) compared to fathers (r = .03). Effects did not differ for contraceptive versus condom use, or among longitudinal versus cross-sectional studies, indicating parent sexual communication had a similar impact across study designs and outcomes. Several methodological issues were identified in the literature; future studies can improve on these by measuring

The Architecture of Chemical Alternatives Assessment.

Science.gov (United States)

Geiser, Kenneth; Tickner, Joel; Edwards, Sally; Rossi, Mark

2015-12-01

Chemical alternatives assessment is a method rapidly developing for use by businesses, governments, and nongovernment organizations seeking to substitute chemicals of concern in production processes and products. Chemical alternatives assessment is defined as a process for identifying, comparing, and selecting safer alternatives to chemicals of concern (including those in materials, processes, or technologies) on the basis of their hazards, performance, and economic viability. The process is intended to provide guidance for assuring that chemicals of concern are replaced with safer alternatives that are not likely to be later regretted. Conceptually, the assessment methods are developed from a set of three foundational pillars and five common principles. Based on a number of emerging alternatives assessment initiatives, in this commentary, we outline a chemical alternatives assessment blueprint structured around three broad steps: Scope, Assessment, and Selection and Implementation. Specific tasks and tools are identified for each of these three steps. While it is recognized that on-going practice will further refine and develop the method and tools, it is important that the structure of the assessment process remain flexible, adaptive, and focused on the substitution of chemicals of concern with safer alternatives. © 2015 Society for Risk Analysis.

Advances in chemical product design

DEFF Research Database (Denmark)

Zhang, Lei; Fung, Ka Yip; Wibowo, Christianto

2018-01-01

The nature of chemical product design problems is diverse and multidisciplinary. It involves many design issues such as project management, market study, product design, process design, and economic analysis for better organizing the product design project and achieving better products. This arti......The nature of chemical product design problems is diverse and multidisciplinary. It involves many design issues such as project management, market study, product design, process design, and economic analysis for better organizing the product design project and achieving better products....... This article provides an overview of chemical product design with a multidisciplinary hierarchical framework including all the design issues and tasks. Each of the design issues and tasks are introduced and discussed, methods and tools are summarized and compared, challenges and perspectives are presented...... to help the chemical product design researchers on finding more novel, innovative and sustainable products, by the combined effort from academia and industry to develop a systematic generic framework, and tools including product simulator, process simulator, database manager, modeling tool, and templates...

Parent-Adolescent Sexual Communication and Adolescent Safer Sex Behavior: A Meta-Analysis.

Science.gov (United States)

Widman, Laura; Choukas-Bradley, Sophia; Noar, Seth M; Nesi, Jacqueline; Garrett, Kyla

2016-01-01

Parent-adolescent sexual communication has received considerable attention as a factor that can positively affect safer sex behavior among youth; however, the evidence linking such communication to youth contraceptive and condom use has not been empirically synthesized. To examine the effect of parent-adolescent sexual communication on safer sex behavior among youth and explore potential moderators of this association. A systematic search of studies published from database inception through June 30, 2014, using the MEDLINE, PsycINFO, and Communication & Mass Media Complete databases and relevant review articles yielded 5098 studies, of which 52 studies with 25,314 adolescents met the study eligibility criteria. Analysis was conducted from July 1, 2014, to July 27, 2015. Studies were included if they sampled adolescents (mean sample age ≤18 years), included an adolescent report of sexual communication with one or both parents, measured safer sex behavior, and were published in English. Correlation coefficients (r) and 95% CIs were computed from studies and meta-analyzed using random-effects models. Safer sex behavior, including use of contraceptives or condoms. Fifty-two articles, including 71 independent effects representing more than 3 decades of research on 25,314 adolescents (weighted mean age, 15.2 years) were synthesized. Across studies, there was a significant weighted mean effect (r = 0.10; 95% CI, 0.08-0.13) linking parent-adolescent sexual communication with safer sex behavior, which was statistically heterogeneous (Q = 203.50, P communication with girls (r = 0.12) than boys (r = 0.04) and among youth who discussed sex with their mothers (r = 0.14) compared with their fathers (r = 0.03). Effects did not differ for contraceptive vs condom use or among longitudinal vs cross-sectional studies, indicating that parent sexual communication had a similar effect across study designs and outcomes. Several methodological issues were

The OSHA hazardous chemical occupational exposure standard for laboratories.

Science.gov (United States)

Armbruster, D A

1991-01-01

OSHA's chemical occupational exposure standard for laboratories is an outgrowth of the previously issued Hazard Communication Standard. The standard relieves laboratories from complying with general industry standards but does require compliance with specific laboratory guidelines. The heart of the standard is the creation of a Chemical Hygiene Plan (CHP). The CHP addresses major issues such as safety equipment and procedures, work practices, training, the designation of a chemical hygiene officer, and the provision of medical consultation and examination for affected employees. This new standard, in full effect as of January 31, 1991, presents yet another regulatory challenge to laboratory managers but also ensures a safer environment for laboratory workers.

A new approach to design safe CNTs with an understanding of redox potential.

Science.gov (United States)

Tsuruoka, Shuji; Cassee, Flemming R; Castranova, Vincent

2013-09-02

Carbon nanotubes (CNTs) are being increasingly industrialized and applied for various products. As of today, although several toxicological evaluations of CNTs have been conducted, designing safer CNTs is not practiced because reaction kinetics of CNTs with bioactive species is not fully understood. The authors propose a kinetic mechanism to establish designing safe CNTs as a new goal. According to a literature search on the behavior of CNTs and the effects of impurities, it is found that chemical reactions on CNT surface are attributed to redox reactions involving metal impurities and carbon structures at the CNT surface. A new goal is proposed to design safer CNTs using the redox potential hypothesis. The value of this hypothesis must be practically investigated and proven through the further experiments.

On Demand Internal Short Circuit Device Enables Verification of Safer, Higher Performing Battery Designs

Energy Technology Data Exchange (ETDEWEB)

Darcy, Eric; Keyser, Matthew

2017-05-15

The Internal Short Circuit (ISC) device enables critical battery safety verification. With the aluminum interstitial heat sink between the cells, normal trigger cells cannot be driven into thermal runaway without excessive temperature bias of adjacent cells. With an implantable, on-demand ISC device, thermal runaway tests show that the conductive heat sinks protected adjacent cells from propagation. High heat dissipation and structural support of Al heat sinks show high promise for safer, higher performing batteries.

Benign by design: catalyst-free in-water, on-water green chemical methodologies in organic synthesis

Science.gov (United States)

The development of organic synthesis under sustainable conditions is a primary goal of practicing green chemists who want to prevent pollution and design safer pathways. Although, it is challenging to avoid the use of catalysts, or solvents in all the organic reactions but progre...

SAFERE: Southern African Feminist Review

African Journals Online (AJOL)

Feminism and Masculinity in an African Capitalist Context: · EMAIL FULL TEXT EMAIL FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. Mwenda G. Ntarangwi, 19-32. http://dx.doi.org/10.4314/safere.v3i1.23948 ...

Sustainable Chemical Processes and Products. New Design Methodology and Design Tools

OpenAIRE

Korevaar, G.

2004-01-01

The current chemical industry is not sustainable, which leads to the fact that innovation of chemical processes and products is too often hazardous for society in general and the environment in particular. It really is a challenge to implement sustainability considerations in the design activities of chemical engineers. Therefore, the main question of this thesis is: how can a trained chemical engineer develop a conceptual design of a chemical process or a chemical product in such a way that ...

Shopping for a safer car

Science.gov (United States)

2010-01-01

This brochure provides some helpful tips on what to look for when shopping for a safer car. Automakers are increasingly advertising the safety features of their cars. The problem is sorting out their claims and zeroing in on the safety features that ...

Anger as a moderator of safer sex motivation among low-income urban women.

Science.gov (United States)

Schroder, Kerstin E E; Carey, Michael P

2005-10-01

Theoretical models suggest that both HIV knowledge and HIV risk perception inform rational decision making and, thus, predict safer sex motivation and behavior. However, the amount of variance explained by knowledge and risk perception is typically small. In this cross-sectional study, we investigated whether the predictive power of HIV knowledge and HIV risk perception on safer sex motivation is affected by trait anger. We hypothesized that anger may disrupt rational decision making, distorting the effects of both HIV knowledge and risk perception on safer sex intentions. Data from 232 low-income, urban women at risk for HIV infection were used to test a path model with past sexual risk behavior, HIV knowledge, and HIV risk perception as predictors of safer sex intentions. Moderator effects of anger on safer sex intentions were tested by simultaneous group comparisons between high-anger and low-anger women (median split). The theoretically expected "rational pattern" was found among low-anger women only, including (a) a positive effect of knowledge on safer sex intentions, and (b) buffer (inhibitor) effects of HIV knowledge and HIV risk perception on the negative path leading from past risk behavior to safer sex intentions. Among high-anger women, an "irrational pattern" emerged, with no effects of HIV knowledge and negative effects of both past risk behavior and HIV risk perception on safer sex intentions. In sum, the results suggest that rational knowledge- and risk-based decisions regarding safer sex may be limited to low-anger women.

Safer v. Estate of Pack.

Science.gov (United States)

1996-07-11

The Superior Court of New Jersey, Appellate Division, recognized "a physician's duty to warn those known to be at risk of avoidable harm from a genetically transmissible condition." During the 1950s, Dr. George Pack treated Donna Shafer's father for a cancerous blockage of the colon and multiple polyposis. In 1990, Safer was diagnosed with the same condition, which she claims is inherited, and, if not diagnosed and treated, invariably will lead to metastic colorectal cancer. Safer alleged that Dr. Pack knew the hereditary nature of the disease, yet failed to warn the immediate family, thus breaching his professional duty to warn. The court did not follow the analysis of the trial court, that a physician has no legal duty to warn the child of a patient of the genetic risk of disease because no physician and patient relationship exists between the doctor and the child.

Safer-drinking strategies used by chronically homeless individuals with alcohol dependence.

Science.gov (United States)

Grazioli, Véronique S; Hicks, Jennifer; Kaese, Greta; Lenert, James; Collins, Susan E

2015-07-01

Chronically homeless individuals with alcohol dependence experience severe alcohol-related consequences. It is therefore important to identify factors that might be associated with reduced alcohol-related harm, such as the use of safer-drinking strategies. Whereas effectiveness of safer-drinking strategies has been well-documented among young adults, no studies have explored this topic among more severely affected populations, such as chronically homeless individuals with alcohol dependence. The aims of this study were thus to qualitatively and quantitatively document safer-drinking strategies used in this population. Participants (N=31) were currently or formerly chronically homeless individuals with alcohol dependence participating in a pilot study of extended-release naltrexone and harm-reduction counseling. At weeks 0 and 8, research staff provided a list of safer-drinking strategies for participants to endorse. Implementation of endorsed safer-drinking strategies was recorded at the next appointment. At both time points, strategies to buffer the effects of alcohol on the body (e.g., eating prior to and during drinking) were most highly endorsed, followed by changing the manner in which one drinks (e.g., spacing drinks), and reducing alcohol consumption. Quantitative analyses indicated that all participants endorsed safer-drinking strategies, and nearly all strategies were implemented (80-90% at weeks 0 and 8, respectively). These preliminary findings indicate that chronically homeless people with alcohol dependence use strategies to reduce harm associated with their drinking. Larger randomized controlled trials are needed to test whether interventions that teach safer-drinking strategies may reduce overall alcohol-related harm in this population. Copyright © 2015 Elsevier Inc. All rights reserved.

Low-toxic and safe nanomaterials by surface-chemical design, carbon nanotubes, fullerenes, metallofullerenes, and graphenes

Science.gov (United States)

YanEqual Contribution, Liang; Zhao, Feng; Li, Shoujian; Hu, Zhongbo; Zhao, Yuliang

2011-02-01

The toxicity grade for a bulk material can be approximately determined by three factors (chemical composition, dose, and exposure route). However, for a nanomaterial it depends on more than ten factors. Interestingly, some nano-factors (like huge surface adsorbability, small size, etc.) that endow nanomaterials with new biomedical functions are also potential causes leading to toxicity or damage to the living organism. Is it possible to create safe nanomaterials if such a number of complicated factors need to be regulated? We herein try to find answers to this important question. We first discuss chemical processes that are applicable for nanosurface modifications, in order to improve biocompatibility, regulate ADME, and reduce the toxicity of carbon nanomaterials (carbon nanotubes, fullerenes, metallofullerenes, and graphenes). Then the biological/toxicological effects of surface-modified and unmodified carbon nanomaterials are comparatively discussed from two aspects: the lowered toxic responses or the enhanced biomedical functions. We summarize the eight biggest challenges in creating low-toxicity and safer nanomaterials and some significant topics of future research needs: to find out safer nanofactors; to establish controllable surface modifications and simpler chemistries for low-toxic nanomaterials; to explore the nanotoxicity mechanisms; to justify the validity of current toxicological theories in nanotoxicology; to create standardized nanomaterials for toxicity tests; to build theoretical models for cellular and molecular interactions of nanoparticles; and to establish systematical knowledge frameworks for nanotoxicology.

Viral Transmissions: Safer Sex Videos, Disability, and Queer Politics

Directory of Open Access Journals (Sweden)

Karisa Butler-Wall

2016-12-01

Full Text Available Bringing disability studies into conversation with queer histories of AIDS activism, this article examines the relationship between disability and queer politics in safer sex videos created by AIDS activists in the 1980s. As a form of what the author terms "guerrilla biopolitics," safer sex videos insisted on the viability of queer life and sexual expression at a historical moment of intense homophobia and sex negativity. At the same time, the vision of sexual health and identity they offered risked reproducing racialized and classed ideologies of ableism. Seeking to "crip" our understandings of safer sex discourses and practices, this study explores how risk reduction techniques have been historically linked to imperatives of compulsory able-bodiedness, precluding alternative expressions of queer/crip life.

Anger as a Moderator of Safer Sex Motivation among Low Income Urban Women

Science.gov (United States)

Carey, Michael P.

2005-01-01

Theoretical models suggest that both HIV knowledge and HIV risk perception inform rational decision-making and, thus, predict safer sex motivation and behavior. However, the amount of variance explained by knowledge and risk perception is typically small. In this cross-sectional study, we investigated whether the predictive power of HIV knowledge and HIV risk perception on safer sex motivation is affected by trait anger. We hypothesized that anger may disrupt rational-decision making, distorting the effects of both HIV knowledge and risk perception on safer sex intentions. Data from 232 low-income, urban women at risk for HIV infection were used to test a path model with past sexual risk behavior, HIV knowledge, and HIV risk perception as predictors of safer sex intentions. Moderator effects of anger on safer sex intentions were tested by simultaneous group comparisons between high-anger and low-anger women (median-split). The theoretically expected “rational pattern” was found among low-anger women only, including (a) a positive effect of knowledge on safer sex intentions, and (b) buffer (inhibitor) effects of HIV knowledge and HIV risk perception on the negative path leading from past risk behavior to safer sex intentions. Among high-anger women, an “irrational pattern” emerged, with no effects of HIV knowledge and negative effects of both past risk behavior and HIV risk perception on safer sex intentions. In sum, the results suggest that rational knowledge and risk-based decisions regarding safer sex may be limited to low-anger women. PMID:16247592

Identifying psychosocial variables that predict safer-sex intentions in adolescents and young adults

Directory of Open Access Journals (Sweden)

Phil eBrüll

2016-04-01

Full Text Available Young people are especially vulnerable to sexually transmitted infections. The triad of deliberate and effective safer-sex behavior encompasses condom use, combined with additional information about a partner’s sexual health, and the kind of sex acts usually performed. To identify psychosocial predictors of young people’s intentions to have safer sex, as related to this triad we conducted an online study with 211 sexually active participants aged between 18 and 24 years. Predictors (i.e. perceived behavioural control, subjective norms and intention taken from Fishbein and Ajzen’s Reasoned Action Approach (RAA, were combined with more distal variables (e.g. behavioral inhibition, sensation seeking, parental monitoring, and knowledge about sexually transmitted infections. Beyond the highly predictive power of RAA variables, additional variance was explained by the number of instances of unprotected sexual intercourse during the last twelve months and reasons for using barrier protection during first sexual intercourse. In particular, past condom nonuse behavior moderated perceived behavioral control related to intended condom use. Further, various distal variables showed significant univariate associations with intentions related to the three behaviors of interest. It may, therefore, be helpful to include measures of past behavior as well as certain additional distal variables in future safer-sex programs designed to promote health sustaining sexual behavior.

Feminism, Anthropology and Androcentrism | Ntarangwi | SAFERE ...

African Journals Online (AJOL)

SAFERE: Southern African Feminist Review. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 4, No 1 (2000) >. Log in or Register to get access to full text downloads.

Safer childbirth: a rights-based approach.

Science.gov (United States)

Boama, Vincent; Arulkumaran, Sabaratnam

2009-08-01

The Millennium Development Goals (MDGs) set very high targets for women's reproductive health through reductions in maternal and infant mortality, among other things. Reductions in maternal mortality and morbidity can be achieved through various different approaches, such as the confidential review of maternal deaths, use of evidence-based treatments and interventions, using a health systems approach, use of information technology, global and regional partnerships, and making pregnancy safer through initiatives that increase the focus on human rights. A combination of these and other approaches can have a synergistic impact on reductions in maternal mortality. This paper highlights some of the current global efforts on safer pregnancy with a focus on reproductive rights. We encourage readers to do more in every corner of the world to advocate for women's reproductive rights and, in this way, we may achieve the MDGs by 2015.

Viral Transmissions: Safer Sex Videos, Disability, and Queer Politics

OpenAIRE

Karisa Butler-Wall

2016-01-01

Bringing disability studies into conversation with queer histories of AIDS activism, this article examines the relationship between disability and queer politics in safer sex videos created by AIDS activists in the 1980s. As a form of what the author terms "guerrilla biopolitics," safer sex videos insisted on the viability of queer life and sexual expression at a historical moment of intense homophobia and sex negativity. At the same time, the vision of sexual health and identity they offered...

Chemical process and plant design bibliography 1959-1989

International Nuclear Information System (INIS)

Ray, M.S.

1991-01-01

This book is concerned specifically with chemical process in formation and plant equipment design data. It is a source for chemical engineers, students and academics involved in process and design evaluation. Over 500 chemical categories are included, from Acetaldehyde to zirconium Dioxide, with cross-referencing within the book to appropriate associated chemicals

Computational design of safer nanomaterials

NARCIS (Netherlands)

Burello, E.

2015-01-01

Nanomaterials are expected to find applications in numerous consumer products, posing the challenge to guarantee their safety and environmental sustainability before they can be transferred from research labs to end-consumer products. One emerging solution, called safe design, relies on the

Seriously Mentally Ill Women’s Safer Sex Behaviors and the Theory of Reasoned Action

Science.gov (United States)

Randolph, Mary E.; Pinkerton, Steven D.; Somlai, Anton M.; Kelly, Jeffrey A.; Gibson, Richard H.; Hackl, Kristin

2014-01-01

Seriously mentally ill women at risk for HIV infection (n = 96) participated in structured interviews assessing sexual and substance use behavior over a 3-month period. The majority of the women (63.5%) did not use condoms. Consistent with the Theory of Reasoned Action, condom use attitudes and perceived social norms about safer sex were associated with safer sex intentions. Supplementing TRA variables with safer sex self-efficacy explained additional variance in safer sex intentions. Greater safer sex intentions were related to both greater condom use and to less frequent unprotected intercourse. In addition, less frequent sex after drug use and a less fatalistic outlook were associated with less frequent unprotected intercourse. Life circumstances specific to this population are particularly important to examine to improve the effectiveness of risk reduction interventions for seriously mentally ill women. PMID:19458268

CDC Vital Signs: Making Health Care Safer

Science.gov (United States)

... of Page What Can Be Done The Federal government is Implementing activities across all government agencies to ... Making Health Care Safer [PSA – 0:60 seconds] Digital Press Kit: CDC Modeling Predicts Growth of Drug- ...

Evaluation of the California Safer Consumer Products Regulation and the impact on consumers and product manufacturers.

Science.gov (United States)

Cowan, Dallas M; Kingsbury, Tony; Perez, Angela L; Woods, Tyler A; Kovochich, Michael; Hill, Denise S; Madl, Amy K; Paustenbach, Dennis J

2014-02-01

Chemistry enables more than 95% of products in the marketplace. Over the past 20 years, various entities began to generate inventories of chemicals ("chemical watch lists") potentially associated with human or environmental health risks. Some lists included thousands of chemicals, while others listed only a few chemistries with limited properties or toxicological endpoints (e.g., neurotoxicants). Enacted on October 1, 2013, the California Safer Consumer Products Regulation (SCP) utilized data from chemical inventory lists to create one master list. This paper aims to discuss the background and requirements of this regulation. Additionally, we wanted to understand the universe of Candidate Chemicals identified by the Regulation. Data from all 23 chemical lists identified in the SCP Regulation were entered into a database. The most prevalent chemicals among the ∼2900 chemicals are identified, including the most prevalent chemical, lead, appearing on 65% of lists, followed by DEHP (52%), perchloroethylene (48%), and benzene (48%). Our results indicated that the most prevalent Candidate Chemicals were either persistent, bioaccumulative, carcinogenic, or reprotoxic. This regulation will have wide-ranging impact in California and throughout the global supply chain, which is highlighted through selected examples and case studies. Copyright © 2013 Elsevier Inc. All rights reserved.

The SAFER Latinos Project: Addressing a Community Ecology Underlying Latino Youth Violence

Science.gov (United States)

Edberg, Mark; Cleary, Sean D.; Collins, Elizabeth; Klevens, Joanne; Leiva, Rodrigo; Bazurto, Martha; Rivera, Ivonne; del Cid, Alex Taylor; Montero, Luisa; Calderon, Melba

2010-01-01

This paper describes the intervention model, early implementation experience, and challenges for the "Seguridad, Apoyo, Familia, Educacion, y Recursos" (SAFER) Latinos project. The SAFER Latinos project is an attempt to build the evidence for a multilevel participatory youth violence prevention model tailored to the specific circumstances of…

Modeling chemical reactions for drug design.

Science.gov (United States)

Gasteiger, Johann

2007-01-01

Chemical reactions are involved at many stages of the drug design process. This starts with the analysis of biochemical pathways that are controlled by enzymes that might be downregulated in certain diseases. In the lead discovery and lead optimization process compounds have to be synthesized in order to test them for their biological activity. And finally, the metabolism of a drug has to be established. A better understanding of chemical reactions could strongly help in making the drug design process more efficient. We have developed methods for quantifying the concepts an organic chemist is using in rationalizing reaction mechanisms. These methods allow a comprehensive modeling of chemical reactivity and thus are applicable to a wide variety of chemical reactions, from gas phase reactions to biochemical pathways. They are empirical in nature and therefore allow the rapid processing of large sets of structures and reactions. We will show here how methods have been developed for the prediction of acidity values and of the regioselectivity in organic reactions, for designing the synthesis of organic molecules and of combinatorial libraries, and for furthering our understanding of enzyme-catalyzed reactions and of the metabolism of drugs.

Interactive design of generic chemical patterns.

Science.gov (United States)

Schomburg, Karen T; Wetzer, Lars; Rarey, Matthias

2013-07-01

Every medicinal chemist has to create chemical patterns occasionally for querying databases, applying filters or describing functional groups. However, the representations of chemical patterns have been so far limited to languages with highly complex syntax, handicapping the application of patterns. Graphic pattern editors similar to chemical editors can facilitate the work with patterns. In this article, we review the interfaces of frequently used web search engines for chemical patterns. We take a look at pattern editing concepts of standalone chemical editors and finally present a completely new, unpublished graphical approach to pattern design, the SMARTSeditor. Copyright © 2013 Elsevier Ltd. All rights reserved.

NREL Multiphysics Modeling Tools and ISC Device for Designing Safer Li-Ion Batteries

Energy Technology Data Exchange (ETDEWEB)

Pesaran, Ahmad A.; Yang, Chuanbo

2016-03-24

The National Renewable Energy Laboratory has developed a portfolio of multiphysics modeling tools to aid battery designers better understand the response of lithium ion batteries to abusive conditions. We will discuss this portfolio, which includes coupled electrical, thermal, chemical, electrochemical, and mechanical modeling. These models can simulate the response of a cell to overheating, overcharge, mechanical deformation, nail penetration, and internal short circuit. Cell-to-cell thermal propagation modeling will be discussed.

Presidential Green Chemistry Challenge: 1997 Designing Greener Chemicals Award

Science.gov (United States)

Presidential Green Chemistry Challenge 1997 award winner, Albright & Wilson Americas, discovered that tetrakis(hydroxymethyl)phosphonium sulfate, THPS, is an effective, safer biocide for use in industrial water systems.

Advancing alternatives analysis: The role of predictive toxicology in selecting safer chemical products and processes.

Science.gov (United States)

Malloy, Timothy; Zaunbrecher, Virginia; Beryt, Elizabeth; Judson, Richard; Tice, Raymond; Allard, Patrick; Blake, Ann; Cote, Ila; Godwin, Hilary; Heine, Lauren; Kerzic, Patrick; Kostal, Jakub; Marchant, Gary; McPartland, Jennifer; Moran, Kelly; Nel, Andre; Ogunseitan, Oladele; Rossi, Mark; Thayer, Kristina; Tickner, Joel; Whittaker, Margaret; Zarker, Ken

2017-09-01

Alternatives analysis (AA) is a method used in regulation and product design to identify, assess, and evaluate the safety and viability of potential substitutes for hazardous chemicals. It requires toxicological data for the existing chemical and potential alternatives. Predictive toxicology uses in silico and in vitro approaches, computational models, and other tools to expedite toxicological data generation in a more cost-effective manner than traditional approaches. The present article briefly reviews the challenges associated with using predictive toxicology in regulatory AA, then presents 4 recommendations for its advancement. It recommends using case studies to advance the integration of predictive toxicology into AA, adopting a stepwise process to employing predictive toxicology in AA beginning with prioritization of chemicals of concern, leveraging existing resources to advance the integration of predictive toxicology into the practice of AA, and supporting transdisciplinary efforts. The further incorporation of predictive toxicology into AA would advance the ability of companies and regulators to select alternatives to harmful ingredients, and potentially increase the use of predictive toxicology in regulation more broadly. Integr Environ Assess Manag 2017;13:915-925. © 2017 SETAC. © 2017 SETAC.

Conceptual Chemical Process Design for Sustainability.

Science.gov (United States)

This chapter examines the sustainable design of chemical processes, with a focus on conceptual design, hierarchical and short-cut methods, and analyses of process sustainability for alternatives. The chapter describes a methodology for incorporating process sustainability analyse...

Volume reduction, a safer and cheaper way of radwaste management

International Nuclear Information System (INIS)

Mergan, L.M.; Cordier, J.P.; Storrer, J.A.

1979-01-01

Development of 'Volume Reduction' has demonstrated that it is a safer and cheaper radwaste management method. Safer, because of several advantages: decrease of solidified product volume, satisfactory product properties, absence of free water, better control of process parameters, increased encapsulation efficiency ... The corresponding impact on the waste management costs, results in important savings on different factors, as well as regards the operational costs as the investment expenses. Economy in the range of BF 35.000 per m 3 of incoming waste is achievable. The main volume reduction techniques readily available are briefly reviewed

Small modular reactors: Simpler, safer, cheaper?

International Nuclear Information System (INIS)

Vujić, Jasmina; Bergmann, Ryan M.; Škoda, Radek; Miletić, Marija

2012-01-01

Nuclear energy can play a very significant long-term role for meeting the world’s increasing energy demands, while simultaneously addressing challenges associated with global climate and environmental impact. Many nations of the world, particularly the Asia/Pacific Rim countries, are actively engaged in a major expansion of their nuclear energy complex. The degree to which nuclear energy can address long-term energy needs, either globally or regionally, will be dictated by the pace and adequacy of technical and policy solutions for waste, safety, security, and non-proliferation issues, as well as the capital cost of construction. Small Modular Reactors (SMRs) could successfully address several of these issues. SMRs offer simpler, standardized, and safer modular design by being factory built, requiring smaller initial capital investment, and having shorter construction times. The SMRs could be small enough to be transportable, could be used in isolated locations without advanced infrastructure and without power grid, or could be clustered in a single site to provide a multi-module, large capacity power plant. This paper summarizes some of the basic features of SMRs for early deployment, several advanced SMR concepts, and points out the benefits and challenges in regulatory, economical, safety and security issues. -- Highlights: ► We held a summer forum on SMR technologies at UC Berkeley in July 2010. ► Advantages and disadvantages, technical and economic, of each design were discussed. ► Further literature searches were also done and this paper summarizes prominent designs. ► We conclude SMRs have no large problems preventing their introduction into the nuclear market.

Steering patients to safer hospitals? The effect of a tiered hospital network on hospital admissions.

Science.gov (United States)

Scanlon, Dennis P; Lindrooth, Richard C; Christianson, Jon B

2008-10-01

To determine if a tiered hospital benefit and safety incentive shifted the distribution of admissions toward safer hospitals. A large manufacturing company instituted the hospital safety incentive (HSI) for union employees. The HSI gave union patients a financial incentive to choose hospitals that met the Leapfrog Group's three patient safety "leaps." The analysis merges data from four sources: claims and enrollment data from the company, the American Hospital Association, the AHRQ HCUP-SID, and a state Office of the Insurance Commissioner. Changes in hospital admissions' patterns for union and nonunion employees using a difference-in-difference design. We estimate the probability of choosing a specific hospital from a set of available alternatives using conditional logistic regression. Patients affiliated with the engineers' union and admitted for a medical diagnosis were 2.92 times more likely to select a hospital designated as safer in the postperiod than in the preperiod, while salaried nonunion (SNU) patients (not subject to the financial incentive) were 0.64 times as likely to choose a compliant hospital in the post- versus preperiod. The difference-in-difference estimate, which is based on the predictions of the conditional logit model, is 0.20. However, the machinists' union was also exposed to the incentive and they were no more likely to choose a safer hospital than the SNU patients. The incentive did not have an effect on patients admitted for a surgical diagnosis, regardless of union status. All patients were averse to travel time, but those union patients selecting an incentive hospital were less averse to travel time. Patient price incentives and quality/safety information may influence hospital selection decisions, particularly for medical admissions, though the optimal incentive level for financial return to the plan sponsor is not clear.

Consensus statement: Supporting Safer Conception and Pregnancy For Men And Women Living with and Affected by HIV.

Science.gov (United States)

Matthews, Lynn T; Beyeza-Kashesya, Jolly; Cooke, Ian; Davies, Natasha; Heffron, Renee; Kaida, Angela; Kinuthia, John; Mmeje, Okeoma; Semprini, Augusto E; Weber, Shannon

2017-05-13

Safer conception interventions reduce HIV incidence while supporting the reproductive goals of people living with or affected by HIV. We developed a consensus statement to address demand, summarize science, identify information gaps, outline research and policy priorities, and advocate for safer conception services. This statement emerged from a process incorporating consultation from meetings, literature, and key stakeholders. Three co-authors developed an outline which was discussed and modified with co-authors, working group members, and additional clinical, policy, and community experts in safer conception, HIV, and fertility. Co-authors and working group members developed and approved the final manuscript. Consensus across themes of demand, safer conception strategies, and implementation were identified. There is demand for safer conception services. Access is limited by stigma towards PLWH having children and limits to provider knowledge. Efficacy, effectiveness, safety, and acceptability data support a range of safer conception strategies including ART, PrEP, limiting condomless sex to peak fertility, home insemination, male circumcision, STI treatment, couples-based HIV testing, semen processing, and fertility care. Lack of guidelines and training limit implementation. Key outstanding questions within each theme are identified. Consumer demand, scientific data, and global goals to reduce HIV incidence support safer conception service implementation. We recommend that providers offer services to HIV-affected men and women, and program administrators integrate safer conception care into HIV and reproductive health programs. Answers to outstanding questions will refine services but should not hinder steps to empower people to adopt safer conception strategies to meet reproductive goals.

Computational chemical product design problems under property uncertainties

DEFF Research Database (Denmark)

Frutiger, Jerome; Cignitti, Stefano; Abildskov, Jens

2017-01-01

Three different strategies of how to combine computational chemical product design with Monte Carlo based methods for uncertainty analysis of chemical properties are outlined. One method consists of a computer-aided molecular design (CAMD) solution and a post-processing property uncertainty...... fluid design. While the higher end of the uncertainty range of the process model output is similar for the best performing fluids, the lower end of the uncertainty range differs largely....

Mass-Produced, Buffer | Masitera | SAFERE: Southern African ...

African Journals Online (AJOL)

SAFERE: Southern African Feminist Review. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 3, No 2 (1999) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access ...

Safer sexual practices among African American women: intersectional socialisation and sexual assertiveness.

Science.gov (United States)

Brown, Danice L; Blackmon, Sha'Kema; Shiflett, Alexandra

2018-06-01

Scholars have posited that childhood socialisation experiences may play a key role in influencing behaviours and attitudes that contribute to the acquisition of HIV. This study examined the links between past ethnic-racial and gender socialisation, sexual assertiveness and the safe sexual practices of African American college women utilising a cluster analytic approach. After identifying separate racial-gender and ethnic-gender socialisation profiles, results indicated that ethnic-gender socialisation cluster profiles were directly associated with sexual assertiveness and safer sex behaviour. Greater levels of ethnic socialisation and low traditional gender role socialisation were found to be associated with greater sexual assertiveness and safer sex behaviour. Further analysis showed that sexual assertiveness mediated the links between the identified ethnic-gender socialisation profiles and safer sex behaviour. Implications for policy and programme development are discussed.

Sustainable Chemical Processes and Products. New Design Methodology and Design Tools

NARCIS (Netherlands)

Korevaar, G.

2004-01-01

The current chemical industry is not sustainable, which leads to the fact that innovation of chemical processes and products is too often hazardous for society in general and the environment in particular. It really is a challenge to implement sustainability considerations in the design activities

Access management in Safer Transportation Network Planning : safety principles, planning framework, and library information.

NARCIS (Netherlands)

Hummel, T.

2001-01-01

This report is one in a series of publications, used in the development of the network planning tool ‘Safer Transportation Network Planning’ (Safer-TNP). The publications were used to guide the development of planning structures, diagnostic tools, planning recommendations, and research information

Intersection planning in Safer Transportation Network Planning : safety principles, planning framework, and library information.

NARCIS (Netherlands)

Hummel, T.

2001-01-01

This report is one in a series of publications, used in the development of the network planning tool ‘Safer Transportation Network Planning’ (Safer-TNP). The publications were used to guide the development of planning structures, diagnostic tools, planning recommendations, and research information

Route management in Safer Transportation Network Planning : safety principles, planning framework, and library information.

NARCIS (Netherlands)

Hummel, T.

2001-01-01

This report is one in a series of publications, used in the development of the network planning tool ‘Safer Transportation Network Planning’ (Safer-TNP). The publications were used to guide the development of planning structures, diagnostic tools, planning recommendations, and research information

Beyond HIV-serodiscordance: Partnership communication dynamics that affect engagement in safer conception care.

Directory of Open Access Journals (Sweden)

Lynn T Matthews

Full Text Available We explored acceptability and feasibility of safer conception methods among HIV-affected couples in Uganda.We recruited HIV-positive men and women on antiretroviral therapy (ART ('index' from the Uganda Antiretroviral Rural Treatment Outcomes cohort who reported an HIV-negative or unknown-serostatus partner ('partner', HIV-serostatus disclosure to partner, and personal or partner desire for a child within two years. We conducted in-depth interviews with 40 individuals from 20 couples, using a narrative approach with tailored images to assess acceptability of five safer conception strategies: ART for the infected partner, pre-exposure prophylaxis (PrEP for the uninfected partner, condomless sex timed to peak fertility, manual insemination, and male circumcision. Translated and transcribed data were analyzed using thematic analysis.11/20 index participants were women, median age of 32.5 years, median of 2 living children, and 80% had HIV-RNA <400 copies/mL. Awareness of HIV prevention strategies beyond condoms and abstinence was limited and precluded opportunity to explore or validly assess acceptability or feasibility of safer conception methods. Four key partnership communication challenges emerged as primary barriers to engagement in safer conception care, including: (1 HIV-serostatus disclosure: Although disclosure was an inclusion criterion, partners commonly reported not knowing the index partner's HIV status. Similarly, the partner's HIV-serostatus, as reported by the index, was frequently inaccurate. (2 Childbearing intention: Many couples had divergent childbearing intentions and made incorrect assumptions about their partner's desires. (3 HIV risk perception: Participants had disparate understandings of HIV transmission and disagreed on the acceptable level of HIV risk to meet reproductive goals. (4 Partnership commitment: Participants revealed significant discord in perceptions of partnership commitment. All four types of partnership

New Vistas in Chemical Product and Process Design

DEFF Research Database (Denmark)

Zhang, Lei; Babi, Deenesh Kavi; Gani, Rafiqul

2016-01-01

Design of chemicals-based products is broadly classified into those that are process centered and those that are product centered. In this article, the designs of both classes of products are reviewed from a process systems point of view; developments related to the design of the chemical product......, its corresponding process, and its integration are highlighted. Although significant advances have been made in the development of systematic model-based techniques for process design (also for optimization, operation, and control), much work is needed to reach the same level for product design....... Timeline diagrams illustrating key contributions in product design, process design, and integrated product-process design are presented. The search for novel, innovative, and sustainable solutions must be matched by consideration of issues related to the multidisciplinary nature of problems, the lack...

Systematic methods for synthesis and design of sustainable chemical and biochemical processes

DEFF Research Database (Denmark)

Gani, Rafiqul

Chemical and biochemical process design consists of designing the process that can sustainably manufacture an identified chemical product through a chemical or biochemical route. The chemical product tree is potentially very large; starting from a set of basic raw materials (such as petroleum...... for process intensification, sustainable process design, identification of optimal biorefinery models as well as integrated process-control design, and chemical product design. The lecture will present the main concepts, the decomposition based solution approach, the developed methods and tools together...

Association between 'safer sex fatigue' and rectal gonorrhea is mediated by unsafe sex with casual partners among HIV-positive homosexual men.

NARCIS (Netherlands)

Stolte, Ineke G; Wit, John B F de; Kolader, Marion-Eliëtte; Fennema, Johan S A; Coutinho, Roel A; Dukers, Nicole H T M

2006-01-01

OBJECTIVE: The objective of this study was to investigate whether and what sexual risk behavior is a mediator of associations between rectal gonorrhea (RG) and highly active antiretroviral therapy-related beliefs, safer sex fatigue, or sexual sensation-seeking among homosexual men. STUDY DESIGN:

Association between 'safer sex fatigue' and rectal gonorrhea is mediated by unsafe sex with casual partners among HIV-positive homosexual men

NARCIS (Netherlands)

Stolte, Ineke G.; de Wit, John B. F.; Kolader, Marion; Fennema, Han; Coutinho, Roel A.; Dukers, Nicole H. T. M.

2006-01-01

OBJECTIVE: The objective of this study was to investigate whether and what sexual risk behavior is a mediator of associations between rectal gonorrhea (RG) and highly active antiretroviral therapy-related beliefs, safer sex fatigue, or sexual sensation-seeking among homosexual men. STUDY DESIGN:

Using a narrative to spark safer sex communication

NARCIS (Netherlands)

Donné, Lennie; Hoeks, Jacobus; Jansen, C. J. M.

2017-01-01

Objective: College students are a group at risk for contracting sexually transmitted infections (STIs). While they are generally well informed about STIs, they do not consistently use condoms. An important element in preventing STIs is safer sex communication, especially with a sexual partner. This

Method for innovative synthesis-design of chemical process flowsheets

DEFF Research Database (Denmark)

Kumar Tula, Anjan; Gani, Rafiqul

Chemical process synthesis-design involve the identification of the processing route to reach a desired product from a specified set of raw materials, design of the operations involved in the processing route, the calculations of utility requirements, the calculations of waste and emission...... to the surrounding and many more. Different methods (knowledge-based [1], mathematical programming [2], hybrid, etc.) have been proposed and are also currently employed to solve these synthesis-design problems. D’ Anterroches [3] proposed a group contribution based approach to solve the synthesis-design problem...... of chemical processes, where, chemical process flowsheets could be synthesized in the same way as atoms or groups of atoms are synthesized to form molecules in computer aided molecular design (CAMD) techniques [4]. That, from a library of building blocks (functional process-groups) and a set of rules to join...

Gender power control, sexual experiences, safer sex practices, and potential HIV risk behaviors among young Asian-American women.

Science.gov (United States)

Hahm, Hyeouk Chris; Lee, Jieha; Rough, Kathryn; Strathdee, Steffanie A

2012-01-01

We examined the prevalence of three domains of sexual behaviors among young Asian-American women: sexual experiences, safer sex practices, and potential HIV risk behaviors. We also investigated the impact of gender power control on these domains. Among sexually experienced women, 51% reported using condoms during their most recent sex act, 63% reported inconsistent condom use, and 18% reported ever having forced sex. Multiple logistic regression analyses revealed that women's perceived lower relationship power control was not associated with vaginal sex or safer sex practices, but it was powerfully associated with forced sex and all three potential HIV risk behaviors. This study demonstrates that control within young Asian-American women's intimate relationships exerts different associations depending on the type of sexual behavior. The application of the Theory of Gender and Power should be employed with prudence when designing HIV interventions for this population.

Land use planning in Safer Transportation Network Planning : safety principles, planning framework, and library information.

NARCIS (Netherlands)

Hummel, T.

2001-01-01

This report is one in a series of publications, used in the development of the network planning tool ‘Safer Transportation Network Planning’ (Safer-TNP). The publications were used to guide the development of planning structures, diagnostic tools, planning recommendations, and research information

Safer handling practice: influence of staff education on older people.

Science.gov (United States)

Wilson, Christine Brown

The purpose of this small-scale survey was to explore the level of moving and handling training undertaken by nurses within private sector continuing care environments and the potential this training had to influence the care of older people. This study uses a definition of safer handling practice derived from existing literature to examine how nurses report the application of this training and whether they observe changes to the mobility of older people within their care. The limitations of this study indicate that generalizations must be made cautiously. However, this study tentatively suggests that potential exists to influence positively the use of safer handling practice as defined within this study. Recommendations for further study are made.

Pregnancy termination in Matlab, Bangladesh: trends and correlates of use of safer and less-safe methods.

Science.gov (United States)

DaVanzo, Julie; Rahman, Mizanur

2014-09-01

Menstrual regulation (MR), a relatively safe form of pregnancy termination, is legal in Bangladesh during the early stages of pregnancy. However, little is known about the factors associated with whether women who terminate pregnancies choose this method or a less-safe one. Data from the Matlab Demographic Surveillance System on 122,691 pregnancies-5,221 (4.3%) of which were terminated-were used to examine trends between 1989 and 2008 in termination and in use of safer methods (MR or dilation and curettage) and less-safe (all other) methods of pregnancy termination. Logistic and multinomial logistic regressions were used to assess factors associated with whether women terminate pregnancies and whether they use safer methods. Sixty-seven percent of pregnancy terminations were by safer methods and 33% by less-safe means. The proportion of pregnancies that were terminated increased between 1989 and 2008; this increase was entirely due to increased use of safer methods. Women younger than 18 and those 25 or older were more likely than women aged 20-24 to terminate their pregnancies (odds ratios ranged from 1.5 among women aged 16-17 or 25-29 to 26.1 among those aged 45 or older). Among women who terminated their pregnancies, those aged 25-44 were more likely than those aged 20-24 to use a safer method. Compared with women who had no formal education, those with some education were more likely to terminate their pregnancies and to do so using safer methods. A growing proportion of pregnancies in Matlab are terminated, and these terminations are increasingly done using safer methods.

System Hardening Architecture for Safer Access to Critical Business ...

African Journals Online (AJOL)

System Hardening Architecture for Safer Access to Critical Business Data. ... and the threat is growing faster than the potential victims can deal with. ... in this architecture are applied to the host, application, operating system, user, and the ...

NREL, NASA, and UCL Team Up to Make Lithium-Ion Batteries Safer on Earth

Science.gov (United States)

(NASA) and University College London (UCL) for a cutting-edge study on lithium-ion (Li-ion) battery and in Space | News | NREL NREL, NASA, and UCL Team Up to Make Lithium-Ion Batteries Safer on Earth and in Space NREL, NASA, and UCL Team Up to Make Lithium-Ion Batteries Safer on Earth and in Space

AIDS in Zimbabwe: | Sibanda | SAFERE: Southern African Feminist ...

African Journals Online (AJOL)

SAFERE: Southern African Feminist Review. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 3, No 1 (1999) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access ...

One being White | Newman | SAFERE: Southern African Feminist ...

African Journals Online (AJOL)

SAFERE: Southern African Feminist Review. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 3, No 2 (1999) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access ...

Community Influences on Married Women's Safer Sex Negotiation Attitudes in Bangladesh: A Multilevel Analysis.

Science.gov (United States)

Jesmin, Syeda S; Cready, Cynthia M

2016-02-01

The influence of disadvantaged or deprived community on individuals' health risk-behaviors is increasingly being documented in a growing body of literature. However, little is known about the effects of community characteristics on women's sexual attitudes and behaviors. To examine community effects on married women's safer sex negotiation attitudes, we analyzed cross-sectional data from the 2011 Bangladesh Demographic and Health Surveys on a sample of 15,134 married women in 600 communities. We estimated two multilevel logistic regression models. Model 1, which included only individual-level variables, showed that women's autonomy/empowerment, age, and HIV knowledge had significant associations with their safer sex negotiation attitudes. We did not find any socioeconomic status gradient in safer sex negotiation attitudes at the individual level. Adding community-level variables in Model 2 significantly improved the fit of the model. Strikingly, we found that higher community-level poverty was associated with greater positive safer sex negotiation attitudes. Prevailing gender norms and overall women's empowerment in the community also had significant effects. While research on community influences calls for focusing on disadvantaged communities, our research highlights the importance of not underestimating the challenges that married women in economically privileged communities may face in negotiating safer sex. To have sufficient and equitable impact on married women's sexual and reproductive health, sexual and reproductive health promotion policies and programs need to be directed to women in wealthier communities as well.

Documentary shows how public employment is making cities safer ...

International Development Research Centre (IDRC) Digital Library (Canada)

2016-06-10

Jun 10, 2016 ... In an engaging new documentary film, researchers from the Centre for the Study of Violence and Reconciliation share their insights of how a public employment program in South Africa is making cities safer and more inclusive.

Beyond HIV-serodiscordance: Partnership communication dynamics that affect engagement in safer conception care.

Science.gov (United States)

Matthews, Lynn T; Burns, Bridget F; Bajunirwe, Francis; Kabakyenga, Jerome; Bwana, Mwebesa; Ng, Courtney; Kastner, Jasmine; Kembabazi, Annet; Sanyu, Naomi; Kusasira, Adrine; Haberer, Jessica E; Bangsberg, David R; Kaida, Angela

2017-01-01

We explored acceptability and feasibility of safer conception methods among HIV-affected couples in Uganda. We recruited HIV-positive men and women on antiretroviral therapy (ART) ('index') from the Uganda Antiretroviral Rural Treatment Outcomes cohort who reported an HIV-negative or unknown-serostatus partner ('partner'), HIV-serostatus disclosure to partner, and personal or partner desire for a child within two years. We conducted in-depth interviews with 40 individuals from 20 couples, using a narrative approach with tailored images to assess acceptability of five safer conception strategies: ART for the infected partner, pre-exposure prophylaxis (PrEP) for the uninfected partner, condomless sex timed to peak fertility, manual insemination, and male circumcision. Translated and transcribed data were analyzed using thematic analysis. 11/20 index participants were women, median age of 32.5 years, median of 2 living children, and 80% had HIV-RNA perception: Participants had disparate understandings of HIV transmission and disagreed on the acceptable level of HIV risk to meet reproductive goals. (4) Partnership commitment: Participants revealed significant discord in perceptions of partnership commitment. All four types of partnership miscommunication introduced constraints to autonomous reproductive decision-making, particularly for women. Such miscommunication was common, as only 2 of 20 partnerships in our sample were mutually-disclosed with agreement across all four communication themes. Enthusiasm for safer conception programming is growing. Our findings highlight the importance of addressing gendered partnership communication regarding HIV disclosure, reproductive goals, acceptable HIV risk, and commitment, alongside technical safer conception advice. Failing to consider partnership dynamics across these domains risks limiting reach, uptake, adherence to, and retention in safer conception programming.

New Vistas in Chemical Product and Process Design.

Science.gov (United States)

Zhang, Lei; Babi, Deenesh K; Gani, Rafiqul

2016-06-07

Design of chemicals-based products is broadly classified into those that are process centered and those that are product centered. In this article, the designs of both classes of products are reviewed from a process systems point of view; developments related to the design of the chemical product, its corresponding process, and its integration are highlighted. Although significant advances have been made in the development of systematic model-based techniques for process design (also for optimization, operation, and control), much work is needed to reach the same level for product design. Timeline diagrams illustrating key contributions in product design, process design, and integrated product-process design are presented. The search for novel, innovative, and sustainable solutions must be matched by consideration of issues related to the multidisciplinary nature of problems, the lack of data needed for model development, solution strategies that incorporate multiscale options, and reliability versus predictive power. The need for an integrated model-experiment-based design approach is discussed together with benefits of employing a systematic computer-aided framework with built-in design templates.

Using a Narrative to Spark Safer Sex Communication

Science.gov (United States)

Donné, Lennie; Hoeks, John; Jansen, Carel

2017-01-01

Objective: College students are a group at risk for contracting sexually transmitted infections (STIs). While they are generally well informed about STIs, they do not consistently use condoms. An important element in preventing STIs is safer sex communication, especially with a sexual partner. This may be difficult, however, because of a lack of…

Gender Power Control, Sexual Experiences, Safer Sex Practices, and Potential HIV Risk Behaviors Among Young Asian-American Women

Science.gov (United States)

Lee, Jieha; Rough, Kathryn; Strathdee, Steffanie A.

2012-01-01

We examined the prevalence of three domains of sexual behaviors among young Asian-American women: sexual experiences, safer sex practices, and potential HIV risk behaviors. We also investigated the impact of gender power control on these domains. Among sexually experienced women, 51% reported using condoms during their most recent sex act, 63% reported inconsistent condom use, and 18% reported ever having forced sex. Multiple logistic regression analyses revealed that women’s perceived lower relationship power control was not associated with vaginal sex or safer sex practices, but it was powerfully associated with forced sex and all three potential HIV risk behaviors. This study demonstrates that control within young Asian-American women’s intimate relationships exerts different associations depending on the type of sexual behavior. The application of the Theory of Gender and Power should be employed with prudence when designing HIV interventions for this population. PMID:21259042

SAFER vehicle inspection: a multimodal robotic sensing platform

Science.gov (United States)

Page, David L.; Fougerolle, Yohan; Koschan, Andreas F.; Gribok, Andrei; Abidi, Mongi A.; Gorsich, David J.; Gerhart, Grant R.

2004-09-01

The current threats to U.S. security both military and civilian have led to an increased interest in the development of technologies to safeguard national facilities such as military bases, federal buildings, nuclear power plants, and national laboratories. As a result, the Imaging, Robotics, and Intelligent Systems (IRIS) Laboratory at The University of Tennessee (UT) has established a research consortium, known as SAFER (Security Automation and Future Electromotive Robotics), to develop, test, and deploy sensing and imaging systems for unmanned ground vehicles (UGV). The targeted missions for these UGV systems include -- but are not limited to --under vehicle threat assessment, stand-off check-point inspections, scout surveillance, intruder detection, obstacle-breach situations, and render-safe scenarios. This paper presents a general overview of the SAFER project. Beyond this general overview, we further focus on a specific problem where we collect 3D range scans of under vehicle carriages. These scans require appropriate segmentation and representation algorithms to facilitate the vehicle inspection process. We discuss the theory for these algorithms and present results from applying them to actual vehicle scans.

Motivational influences on the safer sex behavior of agency-based male sex workers.

Science.gov (United States)

Smith, Michael D; Seal, David W

2008-10-01

Although indoor male sex workers (MSWs) have been found to engage in lower rates of HIV risk behavior with clients than street-based MSWs, few studies have examined the motivations behind such practices. We interviewed 30 MSWs working for the same escort agency regarding their safer sex practices with clients and their reasons for these. As in other research, MSWs reported little risk behavior with clients. Five motivational themes related to safer sex on the job emerged: health concerns, emotional intimacy, client attractiveness, relationships, and structural work factors. Results suggest that participants engaged in rational decision-making relative to sex with clients, facilitated by reduced economic incentive for riskier behavior and a supportive social context. MSWs desired a safe sexual work place, personal integrity, and minimal negative consequences to personal relationships. Collaborating with sex work employers to study their role in encouraging a safer workplace may be important to future research.

A Safer Way to Fight Malaria in Mexico | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

2010-10-18

supported malaria-control strategy in Mexico. The key is working together. Scientists pinpoint sources of malaria; communities destroy mosquito breeding grounds, such as algae in rivers, and spray homes with a safer pesticide.

Toetsing van het gehalte duurzame veiligheid met Safer Transportation Network Planning : integratie van de ‘DV-gehaltemeter’ in het ontwerpprogramma ‘Safer-TNP’

NARCIS (Netherlands)

Hummel, T.

2001-01-01

Testing the sustainable-safety contents with Safer Transportation Network Planning. In the publication entitled “Developing a sustainable-safety meter (DV-meter) for measuring the sustainable-safety contents” (Van der Kooi & Dijkstra, 2000), the development of and a pilot measurement with a

Multi-level Correlates of Safer Conception Methods Awareness and ...

African Journals Online (AJOL)

Many people living with HIV desire childbearing, but low cost safer conception methods (SCM) such as timed unprotected intercourse (TUI) and manual ... including perceived willingness to use SCM, knowledge of respondent's HIV status, HIV-seropositivity, marriage and equality in decision making within the relationship.

Chemical Facility Security: Reauthorization, Policy Issues, and Options for Congress

Science.gov (United States)

2010-12-10

gaseous chlorine disinfection to chloramine disinfection —a change identified by some advocacy groups as being an inherently safer substitution—as being...chemicals, such as chlorine, for purposes such as disinfection .29 Advocates for their inclusion in security regulations cite the presence of such...Science and Technology (S& T ) Directorate is engaged in a Chemical Infrastructure Risk Assessment Project that, among other goals, will assess the

Chemical-Based Formulation Design: Virtual Experimentation

DEFF Research Database (Denmark)

Conte, Elisa; Gani, Rafiqul

This paper presents a software, the virtual Product-Process Design laboratory (virtual PPD-lab) and the virtual experimental scenarios for design/verification of consumer oriented liquid formulated products where the software can be used. For example, the software can be employed for the design......, the additives and/or their mixtures (formulations). Therefore, the experimental resources can focus on a few candidate product formulations to find the best product. The virtual PPD-lab allows various options for experimentations related to design and/or verification of the product. For example, the selection...... design, model adaptation). All of the above helps to perform virtual experiments by blending chemicals together and observing their predicted behaviour. The paper will highlight the application of the virtual PPD-lab in the design and/or verification of different consumer products (paint formulation...

Consumers want safer meat - but not at all costs

DEFF Research Database (Denmark)

Mørkbak, Morten Raun; Christensen, Tove; Gyrd-Hansen, Dorte

2008-01-01

Consumers, the public authorities, and the food industry are all concerned with the safety of meat. The increasing demand for safer food from the consumers and the public authorities puts pressure on producers to identify efficient methods to reduce risks. Earlier studies have shown that consumer...

Advanced and safer lithium-ion battery based on sustainable electrodes

KAUST Repository

Ding, Xiang; Huang, Xiaobing; Jin, Junling; Ming, Hai; Wang, Limin; Ming, Jun

2018-01-01

Seeking advanced and safer lithium-ion battery with sustainable characteristic is significant for the development of electronic devices and electric vehicles. Herein, a new porous TiO nanobundles (PTNBs) is synthesized though a scalable and green

Streamlined approach for environmental restoration (SAFER) plan for corrective action unit 412: clean slate I plutonium dispersion (TTR) tonopah test range, Nevada, revision 0

Energy Technology Data Exchange (ETDEWEB)

Matthews, Patrick K.

2015-04-01

This Streamlined Approach for Environmental Restoration (SAFER) Plan addresses the actions needed to achieve closure for Corrective Action Unit (CAU) 412. CAU 412 is located on the Tonopah Test Range and consists of a single corrective action site (CAS), TA-23-01CS, Pu Contaminated Soil. There is sufficient information and historical documentation from previous investigations and the 1997 interim corrective action to recommend closure of CAU 412 using the SAFER process. Based on existing data, the presumed corrective action for CAU 412 is clean closure. However, additional data will be obtained during a field investigation to document and verify the adequacy of existing information and determine whether the CAU 412 closure objectives have been achieved. This SAFER Plan provides the methodology to gather the necessary information for closing the CAU.The following summarizes the SAFER activities that will support the closure of CAU 412:• Collect environmental samples from designated target populations to confirm or disprove the presence of contaminants of concern (COCs) as necessary to supplement existing information.• If no COCs are present, establish clean closure as the corrective action. • If COCs are present, the extent of contamination will be defined and further corrective actions will be evaluated with the stakeholders (NDEP, USAF).• Confirm the preferred closure option is sufficient to protect human health and the environment.

SAFERE: Southern African Feminist Review - Vol 3, No 1 (1999)

African Journals Online (AJOL)

Feminism and Masculinity in an African Capitalist Context: · EMAIL FULL TEXT EMAIL FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. Mwenda G. Ntarangwi, 19-32. http://dx.doi.org/10.4314/safere.v3i1.23948 ...

Immobilizer-assisted management of metal-contaminated agricultural soils for safer food production.

Science.gov (United States)

Kim, Kwon-Rae; Kim, Jeong-Gyu; Park, Jeong-Sik; Kim, Min-Suk; Owens, Gary; Youn, Gyu-Hoon; Lee, Jin-Su

2012-07-15

Production of food crops on metal contaminated agricultural soils is of concern because consumers are potentially exposed to hazardous metals via dietary intake of such crops or crop derived products. Therefore, the current study was conducted to develop management protocols for crop cultivation to allow safer food production. Metal uptake, as influenced by pH change-induced immobilizing agents (dolomite, steel slag, and agricultural lime) and sorption agents (zeolite and compost), was monitored in three common plants representative of leafy (Chinese cabbage), root (spring onion) and fruit (red pepper) vegetables, in a field experiment. The efficiency of the immobilizing agents was assessed by their ability to decrease the phytoavailability of metals (Cd, Pb, and Zn). The fruit vegetable (red pepper) showed the least accumulation of Cd (0.16-0.29 mgkg(-1) DW) and Pb (0.2-0.9 mgkg(-1) DW) in edible parts regardless of treatment, indicating selection of low metal accumulating crops was a reasonable strategy for safer food production. However, safer food production was more likely to be achievable by combining crop selection with immobilizing agent amendment of soils. Among the immobilizing agents, pH change-induced immobilizers were more effective than sorption agents, showing decreases in Cd and Pb concentrations in each plant well below standard limits. The efficiency of pH change-induced immobilizers was also comparable to reductions obtained by 'clean soil cover' where the total metal concentrations of the plow layer was reduced via capping the surface with uncontaminated soil, implying that pH change-induced immobilizers can be practically applied to metal contaminated agricultural soils for safer food production. Copyright © 2012 Elsevier Ltd. All rights reserved.

A framework for an alternatives assessment dashboard for evaluating chemical alternatives applied to flame retardants for electronic applications

Science.gov (United States)

The goal of alternatives assessment (AA) is to facilitate a comparison of alternatives to a chemical of concern, resulting in the identification of safer alternatives. A two-stage methodology for comparing chemical alternatives was developed. In the first stage, alternatives are ...

Designing Endocrine Disruption Out of the Next Generation of Chemicals.

Science.gov (United States)

Schug, T T; Abagyan, R; Blumberg, B; Collins, T J; Crews, D; DeFur, P L; Dickerson, S M; Edwards, T M; Gore, A C; Guillette, L J; Hayes, T; Heindel, J J; Moores, A; Patisaul, H B; Tal, T L; Thayer, K A; Vandenberg, L N; Warner, J; Watson, C S; Saal, F S Vom; Zoeller, R T; O'Brien, K P; Myers, J P

2013-01-01

A central goal of green chemistry is to avoid hazard in the design of new chemicals. This objective is best achieved when information about a chemical's potential hazardous effects is obtained as early in the design process as feasible. Endocrine disruption is a type of hazard that to date has been inadequately addressed by both industrial and regulatory science. To aid chemists in avoiding this hazard, we propose an endocrine disruption testing protocol for use by chemists in the design of new chemicals. The Tiered Protocol for Endocrine Disruption (TiPED) has been created under the oversight of a scientific advisory committee composed of leading representatives from both green chemistry and the environmental health sciences. TiPED is conceived as a tool for new chemical design, thus it starts with a chemist theoretically at "the drawing board." It consists of five testing tiers ranging from broad in silico evaluation up through specific cell- and whole organism-based assays. To be effective at detecting endocrine disruption, a testing protocol must be able to measure potential hormone-like or hormone-inhibiting effects of chemicals, as well as the many possible interactions and signaling sequellae such chemicals may have with cell-based receptors. Accordingly, we have designed this protocol to broadly interrogate the endocrine system. The proposed protocol will not detect all possible mechanisms of endocrine disruption, because scientific understanding of these phenomena is advancing rapidly. To ensure that the protocol remains current, we have established a plan for incorporating new assays into the protocol as the science advances. In this paper we present the principles that should guide the science of testing new chemicals for endocrine disruption, as well as principles by which to evaluate individual assays for applicability, and laboratories for reliability. In a 'proof-of-principle' test, we ran 6 endocrine disrupting chemicals (EDCs) that act via

Identifying and designing chemicals with minimal acute aquatic toxicity.

Science.gov (United States)

Kostal, Jakub; Voutchkova-Kostal, Adelina; Anastas, Paul T; Zimmerman, Julie Beth

2015-05-19

Industrial ecology has revolutionized our understanding of material stocks and flows in our economy and society. For this important discipline to have even deeper impact, we must understand the inherent nature of these materials in terms of human health and the environment. This paper focuses on methods to design synthetic chemicals to reduce their intrinsic ability to cause adverse consequence to the biosphere. Advances in the fields of computational chemistry and molecular toxicology in recent decades allow the development of predictive models that inform the design of molecules with reduced potential to be toxic to humans or the environment. The approach presented herein builds on the important work in quantitative structure-activity relationships by linking toxicological and chemical mechanistic insights to the identification of critical physical-chemical properties needed to be modified. This in silico approach yields design guidelines using boundary values for physiochemical properties. Acute aquatic toxicity serves as a model endpoint in this study. Defining value ranges for properties related to bioavailability and reactivity eliminates 99% of the chemicals in the highest concern for acute aquatic toxicity category. This approach and its future implementations are expected to yield very powerful tools for life cycle assessment practitioners and molecular designers that allow rapid assessment of multiple environmental and human health endpoints and inform modifications to minimize hazard.

Bayesian molecular design with a chemical language model

Science.gov (United States)

Ikebata, Hisaki; Hongo, Kenta; Isomura, Tetsu; Maezono, Ryo; Yoshida, Ryo

2017-04-01

The aim of computational molecular design is the identification of promising hypothetical molecules with a predefined set of desired properties. We address the issue of accelerating the material discovery with state-of-the-art machine learning techniques. The method involves two different types of prediction; the forward and backward predictions. The objective of the forward prediction is to create a set of machine learning models on various properties of a given molecule. Inverting the trained forward models through Bayes' law, we derive a posterior distribution for the backward prediction, which is conditioned by a desired property requirement. Exploring high-probability regions of the posterior with a sequential Monte Carlo technique, molecules that exhibit the desired properties can computationally be created. One major difficulty in the computational creation of molecules is the exclusion of the occurrence of chemically unfavorable structures. To circumvent this issue, we derive a chemical language model that acquires commonly occurring patterns of chemical fragments through natural language processing of ASCII strings of existing compounds, which follow the SMILES chemical language notation. In the backward prediction, the trained language model is used to refine chemical strings such that the properties of the resulting structures fall within the desired property region while chemically unfavorable structures are successfully removed. The present method is demonstrated through the design of small organic molecules with the property requirements on HOMO-LUMO gap and internal energy. The R package iqspr is available at the CRAN repository.

Short-Term Impact of Safer Choices: A Multicomponent, School-Based HIV, Other STD, and Pregnancy Prevention Program.

Science.gov (United States)

Coyle, Karin; Basen-Engquist, Karen; Kirby, Douglas; Parcel, Guy; Banspach, Stephen; Harrist, Ronald; Baumler, Elizabeth; Weil, Marsha

1999-01-01

Evaluated the effectiveness of the first year of "Safer Choices," a two-year, multicomponent HIV, STD, and pregnancy-prevention program for high school students based on social theory. Student self-report surveys indicated that "Safer Choices" succeeded in reducing selected risk behaviors and in enhancing selected protective…

The Virtual Product-Process Design Laboratory for Structured Chemical Product Design and Analysis

DEFF Research Database (Denmark)

Mattei, Michele; Yunus, Nor Alafiza Binti; Kalakul, Sawitree

2014-01-01

The objective of this paper is to present new methods for design of chemicals based formulated products and their implementation in the software, the Virtual Product-Process Design Laboratory. The new products are tailor-made blended liquid products and emulsion-based products. The new software...

Teaching chemical product design to engineering students: course contents and challenges

DEFF Research Database (Denmark)

Skov, Anne Ladegaard; Kiil, Søren

Chemical product design is not taught in the same way as traditional engineering courses like unit operations or transport phenomena. This paper gives an overview of the challenges that we, as teachers, have faced when teaching chemical product design to engineering students. Specific course...

Design of tailor-made chemical blend using a decomposition-based computer-aided approach

DEFF Research Database (Denmark)

Yunus, Nor Alafiza; Gernaey, Krist; Manan, Z.A.

2011-01-01

Computer aided techniques form an efficient approach to solve chemical product design problems such as the design of blended liquid products (chemical blending). In chemical blending, one tries to find the best candidate, which satisfies the product targets defined in terms of desired product...... methodology for blended liquid products that identifies a set of feasible chemical blends. The blend design problem is formulated as a Mixed Integer Nonlinear Programming (MINLP) model where the objective is to find the optimal blended gasoline or diesel product subject to types of chemicals...... and their compositions and a set of desired target properties of the blended product as design constraints. This blend design problem is solved using a decomposition approach, which eliminates infeasible and/or redundant candidates gradually through a hierarchy of (property) model based constraints. This decomposition...

Process Design and Evaluation for Chemicals Based on Renewable Resources

DEFF Research Database (Denmark)

Fu, Wenjing

. In addition, another characteristic of chemicals based on renewable feedstocks is that many alternative technologies and possible routes exist, resulting in many possible process flowsheets. The challenge for process engineers is then to choose between possible process routes and alternative technologies...... development of chemicals based on renewable feedstocks. As an example, this thesis especially focuses on applying the methodology in process design and evaluation of the synthesis of 5-hydroxymethylfurfural (HMF) from the renewable feedstock glucose/fructose. The selected example is part of the chemoenzymatic......One of the key steps in process design is choosing between alternative technologies, especially for processes producing bulk and commodity chemicals. Recently, driven by the increasing oil prices and diminishing reserves, the production of bulk and commodity chemicals from renewable feedstocks has...

Model-Based Integrated Process Design and Controller Design of Chemical Processes

DEFF Research Database (Denmark)

Abd Hamid, Mohd Kamaruddin Bin

that is typically formulated as a mathematical programming (optimization with constraints) problem is solved by the so-called reverse approach by decomposing it into four sequential hierarchical sub-problems: (i) pre-analysis, (ii) design analysis, (iii) controller design analysis, and (iv) final selection......This thesis describes the development and application of a new systematic modelbased methodology for performing integrated process design and controller design (IPDC) of chemical processes. The new methodology is simple to apply, easy to visualize and efficient to solve. Here, the IPDC problem...... are ordered according to the defined performance criteria (objective function). The final selected design is then verified through rigorous simulation. In the pre-analysis sub-problem, the concepts of attainable region and driving force are used to locate the optimal process-controller design solution...

The WIPP transportation system -- ''Safer than any other''

International Nuclear Information System (INIS)

Ward, T.R.; Spooner, R.

1991-01-01

The Department of Energy (DOE) has developed an integrated transportation system to transport transuranic (TRU) waste from ten widely dispersed generator sites to the Waste Isolation Pilot Plant (WIPP). The system consists of a Type B container, a specially designed trailer, a lightweight tractor, the DOE TRANSCOM satellite-based vehicle tracking system, and uniquely qualified and highly trained drivers. The DOE has demonstrated that this system is ready to transport the TRU waste to the WIPP site efficiently and safely. Since the system was put in place in November 1988, it has been repeatedly upgraded and enhanced to incorporate additional safety measures. In June of 1989, the National Academy of Sciences (NAS) reviewed the transportation system and concluded that ''the system proposed for transportation of TRU waste to WIPP is safer than that employed for any other hazardous material in the United States today and will reduce risk to very low levels'' (emphasis added). The NAS conclusion was made before the DOE implemented the Enhanced Driver Training Course for carrier drivers. The challenge facing the DOE was to examine the transportation system objectively and determine what additional improvements could be made to further enhance safety

Design and Control of Chemical Grouting : Volume 3 - Engineering Practice

Science.gov (United States)

1983-04-01

Recent improvements in the engineering practice of chemical grouting have provided increased confidence in this method of ground modification. Designers can significantly improve the success of chemical grouting by defining their grouting program obj...

Chemical kinetics and oil shale process design

Energy Technology Data Exchange (ETDEWEB)

Burnham, A.K.

1993-07-01

Oil shale processes are reviewed with the goal of showing how chemical kinetics influences the design and operation of different processes for different types of oil shale. Reaction kinetics are presented for organic pyrolysis, carbon combustion, carbonate decomposition, and sulfur and nitrogen reactions.

Lessons learned from the design of chemical space networks and opportunities for new applications

Science.gov (United States)

Vogt, Martin; Stumpfe, Dagmar; Maggiora, Gerald M.; Bajorath, Jürgen

2016-03-01

The concept of chemical space is of fundamental relevance in chemical informatics and computer-aided drug discovery. In a series of articles published in the Journal of Computer- Aided Molecular Design, principles of chemical space design were evaluated, molecular networks proposed as an alternative to conventional coordinate-based chemical reference spaces, and different types of chemical space networks (CSNs) constructed and analyzed. Central to the generation of CSNs was the way in which molecular similarity relationships were assessed and a primary focal point was the network-based representation of biologically relevant chemical space. The design and comparison of CSNs based upon alternative similarity measures can be viewed as an evolutionary path with interesting lessons learned along the way. CSN design has matured to the point that such chemical space representations can be used in practice. In this contribution, highlights from the sequence of CSN design efforts are discussed in context, providing a perspective for future practical applications.

Lessons learned from the design of chemical space networks and opportunities for new applications.

Science.gov (United States)

Vogt, Martin; Stumpfe, Dagmar; Maggiora, Gerald M; Bajorath, Jürgen

2016-03-01

The concept of chemical space is of fundamental relevance in chemical informatics and computer-aided drug discovery. In a series of articles published in the Journal of Computer-Aided Molecular Design, principles of chemical space design were evaluated, molecular networks proposed as an alternative to conventional coordinate-based chemical reference spaces, and different types of chemical space networks (CSNs) constructed and analyzed. Central to the generation of CSNs was the way in which molecular similarity relationships were assessed and a primary focal point was the network-based representation of biologically relevant chemical space. The design and comparison of CSNs based upon alternative similarity measures can be viewed as an evolutionary path with interesting lessons learned along the way. CSN design has matured to the point that such chemical space representations can be used in practice. In this contribution, highlights from the sequence of CSN design efforts are discussed in context, providing a perspective for future practical applications.

Application showcases for a small scale membrane contactor for fine chemical processes

NARCIS (Netherlands)

Roelands, C.P.M.; Ngene, I.S.

2011-01-01

The transition from batch to continuous processing in fine-chemicals industries offers many advantages; among these are a high volumetric productivity, improved control over reaction conditions resulting in a higher yield and selectivity, a small footprint and a safer process due to a smaller

Phosphoryl-rich flame-retardant ions (FRIONs): towards safer lithium-ion batteries.

Science.gov (United States)

Rectenwald, Michael F; Gaffen, Joshua R; Rheingold, Arnold L; Morgan, Alexander B; Protasiewicz, John D

2014-04-14

The functionalized catecholate, tetraethyl (2,3-dihydroxy-1,4-phenylene)bis(phosphonate) (H2 -DPC), has been used to prepare a series of lithium salts Li[B(DPC)(oxalato)], Li[B(DPC)2], Li[B(DPC)F2], and Li[P(DPC)3]. The phosphoryl-rich character of these anions was designed to impart flame-retardant properties for their use as potential flame-retardant ions (FRIONs), additives, or replacements for other lithium salts for safer lithium-ion batteries. The new materials were fully characterized, and the single-crystal structures of Li[B(DPC)(oxalato)] and Li[P(DPC)3] have been determined. Thermogravimetric analysis of the four lithium salts show that they are thermally stable up to around 200 °C. Pyrolysis combustion flow calorimetry reveals that these salts produce high char yields upon combustion. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Molecular modeling for the design of novel performance chemicals and materials

CERN Document Server

Rai, Beena

2012-01-01

Molecular modeling (MM) tools offer significant benefits in the design of industrial chemical plants and material processing operations. While the role of MM in biological fields is well established, in most cases MM works as an accessory in novel products/materials development rather than a tool for direct innovation. As a result, MM engineers and practitioners are often seized with the question: ""How do I leverage these tools to develop novel materials or chemicals in my industry?"" Molecular Modeling for the Design of Novel Performance Chemicals and Materials answers this important questio

Military men and sexual practices: Discourses of 'othering' in safer ...

African Journals Online (AJOL)

Military men and sexual practices: Discourses of 'othering' in safer sex in the light of HIV/AIDS. ... Military men are particularly vulnerable to HIV because of their working conditions; for example, working far from home and being among communities where they have greater economic and political power, as well as in relation ...

The e-Safer Suffolk Cybersurvey 2012-2013 Summary Report

OpenAIRE

Bond, E; Carter, P J; Youthworks Consulting Ltd.; Suffolk County Council; University Campus Suffolk; Suffolk Children's Trust Partnership

2013-01-01

This research by Dr Emma Bond and Dr Pelham Carter at UCS, funded by the Suffolk Children’s Trust and commissioned by Suffolk’s E-Safer Strategy investigated the Cyberbullying experiences by young people in Suffolk. The study undertaken between September – November in 2012 was based on an online questionnaire, administered by Youthworks Consulting Ltd, which examined the responses of 2,838 young people in Suffolk.

Property Model-Based Chemcal Substitution and Chemical Formulation Design

DEFF Research Database (Denmark)

Jhamb, Spardha Virendra; Liang, Xiaodong; Hukkerikar, Amol Shivajirao

Chemical-based products including structured product formulations and single molecule products have proven to be a boon to mankind and have been a significant part of our economies. Our life and the changes around us cannot be imagined without the presence or involvement of chemicals. But like...... with environmentally benign chemicals. Additionally, the decisions taken during chemical product design also have an impact on the process and product performance and are influenced by company strategy, availability of market and government policies [2]. Hence, undoubtedly there is a need to develop a systematic...... [3] will also be highlighted. A set of new group contribution-based models for a number of useful properties of amino acids will be presented. Through examples on substitution of chemicals from chemical-based products from various sectors namely cosmetics and personal care, pharmaceutical and food...

The urban dilemma: how to make cities safer | IDRC - International ...

International Development Research Centre (IDRC) Digital Library (Canada)

2015-10-01

Oct 1, 2015 ... ... and inequalities, and identify which programs work – and which don't – to prevent and reduce violence in cities. Read the blog post. Learn more from the baseline study, Researching the Urban Dilemma. Find out more about how IDRC supports research to make cities safer through our partnership – Safe ...

TNO moving forward ... to a safer, cleaner and more efficient mobility

NARCIS (Netherlands)

Bleijenberg, A.N.

2008-01-01

This book provides an impression of how we are contributing to cleaner, safer and more efficient mobility in Europe, helping our customers from concept to implementation and from engineering solutions to strategic advice. Our knowledge is derived to a significant extent from European research

Designing Intelligent Secure Android Application for Effective Chemical Inventory

Science.gov (United States)

Shukran, Mohd Afizi Mohd; Naim Abdullah, Muhammad; Nazri Ismail, Mohd; Maskat, Kamaruzaman; Isa, Mohd Rizal Mohd; Shahfee Ishak, Muhammad; Adib Khairuddin, Muhamad

2017-08-01

Mobile services support various situations in everyday life and with the increasing sophistication of phone functions, the daily life is much more easier and better especially in term of managing tools and apparatus. Since chemical inventory management system has been experiencing a new revolution from antiquated to an automated inventory management system, some additional features should be added in current chemical inventory system. Parallel with the modern technologies, chemical inventory application using smart phone has been developed. Several studies about current related chemical inventory management using smart phone application has been done in this paper in order to obtain an overview on recent studies in smartphone application for chemical inventory system which are needed in schools, universities or other education institutions. This paper also discuss about designing the proposed secure mobile chemical inventory system. The study of this paper can provide forceful review analysis support for the chemical inventory management system related research.

Design for the Environment Products (Online Search)

Science.gov (United States)

This dataset contains a list of products that carry the Design for the Environment (DfE) label. This mark enables consumers to quickly identify and choose products that can help protect the environment and are safer for families. When you see the DfE logo on a product it means that the DfE scientific review team has screened each ingredient for potential human health and environmental effects and that-based on currently available information, EPA predictive models, and expert judgment-the product contains only those ingredients that pose the least concern among chemicals in their class. Product manufacturers who become DfE partners, and earn the right to display the DfE logo on recognized products, have invested heavily in research, development and reformulation to ensure that their ingredients and finished product line up on the green end of the health and environmental spectrum while maintaining or improving product performance. EPA's Design for the Environment Program (DfE) has allowed use of their logo on over 2500 products. These products are formulated from the safest possible ingredients and have reduced the use of chemicals of concern by hundreds of millions of pounds.

Sexually active older Australian's knowledge of sexually transmitted infections and safer sexual practices.

Science.gov (United States)

Lyons, Anthony; Heywood, Wendy; Fileborn, Bianca; Minichiello, Victor; Barrett, Catherine; Brown, Graham; Hinchliff, Sharron; Malta, Sue; Crameri, Pauline

2017-06-01

Rates of sexually transmitted infections (STIs) are rising among older Australians. We conducted a large survey of older people's knowledge of STIs and safer sexual practices. A total of 2,137 Australians aged 60 years and older completed the survey, which included 15 questions assessing knowledge of STIs and safer sexual practices. We examined both levels of knowledge and factors associated with an overall knowledge score. In total, 1,652 respondents reported having sex in the past five years and answered all knowledge questions. This group had good general knowledge but poorer knowledge in areas such as the protection offered by condoms and potential transmission modes for specific STIs. Women had better knowledge than men. Men in their 60s, men with higher education levels, and men who thought they were at risk of STIs reported better knowledge than other men. Knowledge was also better among men and women who had been tested for STIs or reported 'other' sources of knowledge on STIs. Many older Australians lack knowledge of STIs and safer sexual practices. Implications for public health: To reverse current trends toward increasing STI diagnoses in this population, policies and education campaigns aimed at improving knowledge levels may need to be considered. © 2017 The Authors.

Experiences Using Pre-Exposure Prophylaxis for Safer Conception Among HIV Serodiscordant Heterosexual Couples in the United States.

Science.gov (United States)

Bazzi, Angela R; Leech, Ashley A; Biancarelli, Dea L; Sullivan, Meg; Drainoni, Mari-Lynn

2017-08-01

Antiretroviral pre-exposure prophylaxis (PrEP) is a promising HIV prevention strategy for HIV serodiscordant couples (HIV-infected male, uninfected female) seeking safer conception. However, most research on PrEP for safer conception has focused on couples in sub-Saharan Africa; little is known about the perspectives or experiences of heterosexual couples in the United States. We conducted qualitative interviews with six couples (six women and five of their male partners) receiving PrEP for conception services at an urban safety net hospital in the US Northeast. In-depth interview guides explored couple relationships and contextual factors and attitudes, perceptions, and decision-making processes surrounding PrEP for safer conception. Thematic analyses focused on identifying the following emergent themes. We found that couple relationships were situated within broader social and cultural contexts of immigration, family, and community that shaped their experiences with HIV and serodiscordant relationship status. Despite strong partner support within relationships, HIV stigma and disapproval of serodiscordant relationships contributed to couples' feelings of social isolation and subsequent aspirations to have "normal" families. By enabling "natural" conception through condomless sex, PrEP for safer conception provided a sense of enhanced relationship intimacy. Couples called for increasing public awareness of PrEP through positive messaging as a way to combat HIV stigma. Findings suggest that relationship dynamics and broader social contexts appear to shape HIV serodiscordant couples' fertility desires and motivations to use PrEP. However, increased public awareness of PrEP for safer conception may be needed to combat HIV stigma at the community level.

Reducing aquatic hazards of industrial chemicals: probabilistic assessment of sustainable molecular design guidelines.

Science.gov (United States)

Connors, Kristin A; Voutchkova-Kostal, Adelina M; Kostal, Jakub; Anastas, Paul; Zimmerman, Julie B; Brooks, Bryan W

2014-08-01

Basic toxicological information is lacking for the majority of industrial chemicals. In addition to increasing empirical toxicity data through additional testing, prospective computational approaches to drug development aim to serve as a rational basis for the design of chemicals with reduced toxicity. Recent work has resulted in the derivation of a "rule of 2," wherein chemicals with an octanol-water partition coefficient (log P) less than 2 and a difference between the lowest unoccupied molecular orbital and the highest occupied molecular orbital (ΔE) greater than 9 (log P9 eV) are predicted to be 4 to 5 times less likely to elicit acute or chronic toxicity to model aquatic organisms. The present study examines potential reduction of aquatic toxicity hazards from industrial chemicals if these 2 molecular design guidelines were employed. Probabilistic hazard assessment approaches were used to model the likelihood of encountering industrial chemicals exceeding toxicological categories of concern both with and without the rule of 2. Modeling predicted that utilization of these molecular design guidelines for log P and ΔE would appreciably decrease the number of chemicals that would be designated to be of "high" and "very high" concern for acute and chronic toxicity to standard model aquatic organisms and end points as defined by the US Environmental Protection Agency. For example, 14.5% of chemicals were categorized as having high and very high acute toxicity to the fathead minnow model, whereas only 3.3% of chemicals conforming to the design guidelines were predicted to be in these categories. Considerations of specific chemical classes (e.g., aldehydes), chemical attributes (e.g., ionization), and adverse outcome pathways in representative species (e.g., receptor-mediated responses) could be used to derive future property guidelines for broader classes of contaminants. © 2014 SETAC.

Building social capital in healthcare organizations: thinking ecologically for safer care.

Science.gov (United States)

Hofmeyer, Anne; Marck, Patricia B

2008-01-01

Research on patient safety and health human resources, 2 critical issues for 21st century healthcare, converges on similar findings. Specifically, it is apparent that along with the patients, families, and communities we serve, nurses and other healthcare professionals navigate a volatile health care system where persistent restructuring, market pressures, and workforce instability present ongoing threats to the delivery of safer care. Drawing from the fields of nursing, healthcare ethics, health systems management, and ecological restoration, we outline the role of social capital for organizational integrity, healthy workplace cultures, sustainable resource management, improved nurse retention, effective knowledge translation, and safer patient care. Nursing leaders can use ecological thinking to build the vital resource of social capital by taking concrete steps to commit the necessary human and material resources to: (1) forge relations to foster bonding, bridging and linking social capital; (2) build solidarity and trust; (3) foster collective action and cooperation; (4) strengthen communication and knowledge exchange; and (5) create capacity for social cohesion and inclusion.

kNOw Fear: Making rural public spaces safer for women and girls ...

International Development Research Centre (IDRC) Digital Library (Canada)

2018-05-01

May 1, 2018 ... kNOw Fear: Making rural public spaces safer for women and girls ... The International Centre for Research on Women (ICRW) conducts research ... Poonam Kathuria's 17 years of experience as a women's rights advocate is ...

Integrated Computer-aided Framework for Sustainable Chemical Product Design and Evaluation

DEFF Research Database (Denmark)

Kalakul, Sawitree; Cignitti, Stefano; Zhang, Lei

2016-01-01

This work proposes an integrated model-based framework for chemical product design and evaluation based on which the software, VPPD-Lab (The Virtual Product-Process Design Laboratory) has been developed. The framework allows the following options: (1) design a product using design templates...

NanoSafer vs. 1.1 - Nanomaterial risk assessment using first order modeling

DEFF Research Database (Denmark)

Jensen, Keld A.; Saber, Anne T.; Kristensen, Henrik V.

2013-01-01

Currently, there are no nanospecific safety data sheets (SDS) fo r manufactured nanomaterials (MN) and there is only limited data available on nanomaterial exposure levels. We have established an advanced control banding tool, NanoSafer, which enables alternative risk assessm ent and guidance...... in the SDS for the closest analogue bulk material for which the requested occupational exposure limit (OEL) is given as well. The emission potential is either given by a constant release rate or the dustiness level determined us ing the EN15051 rotating drum or similar. The exposure assessment is estimated...... of the nearest analogue bulk material a nd the specific surface area. The NanoSafer control banding tool is now available in Danish and English and contains help tools, including a data library with dustiness data and an inspirational nanosafety e learning tool for companies’ risk management. The ability...

Perspectives on the design of safer nanomaterials and manufacturing processes

International Nuclear Information System (INIS)

Geraci, Charles; Heidel, Donna; Sayes, Christie; Hodson, Laura; Schulte, Paul; Eastlake, Adrienne; Brenner, Sara

2015-01-01

A concerted effort is being made to insert Prevention through Design principles into discussions of sustainability, occupational safety and health, and green chemistry related to nanotechnology. Prevention through Design is a set of principles, which includes solutions to design out potential hazards in nanomanufacturing including the design of nanomaterials, and strategies to eliminate exposures and minimize risks that may be related to the manufacturing processes and equipment at various stages of the lifecycle of an engineered nanomaterial

Perspectives on the design of safer nanomaterials and manufacturing processes

Energy Technology Data Exchange (ETDEWEB)

Geraci, Charles [National Institute for Occupational Safety and Health (United States); Heidel, Donna [Bureau Veritas North America, Inc. (United States); Sayes, Christie [Baylor University (United States); Hodson, Laura, E-mail: lhodson@cdc.gov; Schulte, Paul; Eastlake, Adrienne [National Institute for Occupational Safety and Health (United States); Brenner, Sara [Colleges of Nanoscale Science and Engineering at State University of New York Polytechnic Institute, (SUNY Poly) (United States)

2015-09-15

A concerted effort is being made to insert Prevention through Design principles into discussions of sustainability, occupational safety and health, and green chemistry related to nanotechnology. Prevention through Design is a set of principles, which includes solutions to design out potential hazards in nanomanufacturing including the design of nanomaterials, and strategies to eliminate exposures and minimize risks that may be related to the manufacturing processes and equipment at various stages of the lifecycle of an engineered nanomaterial.

Models and Modelling Tools for Chemical Product and Process Design

DEFF Research Database (Denmark)

Gani, Rafiqul

2016-01-01

The design, development and reliability of a chemical product and the process to manufacture it, need to be consistent with the end-use characteristics of the desired product. One of the common ways to match the desired product-process characteristics is through trial and error based experiments......-based framework is that in the design, development and/or manufacturing of a chemical product-process, the knowledge of the applied phenomena together with the product-process design details can be provided with diverse degrees of abstractions and details. This would allow the experimental resources...... to be employed for validation and fine-tuning of the solutions from the model-based framework, thereby, removing the need for trial and error experimental steps. Also, questions related to economic feasibility, operability and sustainability, among others, can be considered in the early stages of design. However...

Integrating chemical engineering fundamentals in the capstone process design project

DEFF Research Database (Denmark)

von Solms, Nicolas; Woodley, John; Johnsson, Jan Erik

2010-01-01

Reaction Engineering. In order to incorporate reactor design into process design in a meaningful way, the teachers of the respective courses need to collaborate (Standard 9 – Enhancement of Faculty CDIO skills). The students also see that different components of the chemical engineering curriculum relate......All B.Eng. courses offered at the Technical University of Denmark (DTU) must now follow CDIO standards. The final “capstone” course in the B.Eng. education is Process Design, which for many years has been typical of chemical engineering curricula worldwide. The course at DTU typically has about 30...... of the CDIO standards – especially standard 3 – Integrated Curriculum - means that the course projects must draw on competences provided in other subjects which the students are taking in parallel with Process Design – specifically Process Control and Reaction Engineering. In each semester of the B...

Introduction to Chemical Engineering Reactor Analysis: A Web-Based Reactor Design Game

Science.gov (United States)

Orbey, Nese; Clay, Molly; Russell, T.W. Fraser

2014-01-01

An approach to explain chemical engineering through a Web-based interactive game design was developed and used with college freshman and junior/senior high school students. The goal of this approach was to demonstrate how to model a lab-scale experiment, and use the results to design and operate a chemical reactor. The game incorporates both…

Statistically designed experiments to screen chemical mixtures for possible interactions

NARCIS (Netherlands)

Groten, J.P.; Tajima, O.; Feron, V.J.; Schoen, E.D.

1998-01-01

For the accurate analysis of possible interactive effects of chemicals in a defined mixture, statistical designs are necessary to develop clear and manageable experiments. For instance, factorial designs have been successfully used to detect two-factor interactions. Particularly useful for this

Methods and tools for sustainable chemical process design

DEFF Research Database (Denmark)

Loureiro da Costa Lira Gargalo, Carina; Chairakwongsa, Siwanat; Quaglia, Alberto

2015-01-01

As the pressure on chemical and biochemical processes to achieve a more sustainable performance increases, the need to define a systematic and holistic way to accomplish this is becoming more urgent. In this chapter, a multilevel computer-aided framework for systematic design of more sustainable...

Evaluating the implementation of health and safety innovations under a regulatory context: a collective case study of Ontario's safer needle regulation.

Science.gov (United States)

Chambers, Andrea; Mustard, Cameron A; Breslin, Curtis; Holness, Linn; Nichol, Kathryn

2013-01-22

Implementation effectiveness models have identified important factors that can promote the successful implementation of an innovation; however, these models have been examined within contexts where innovations are adopted voluntarily and often ignore the socio-political and environmental context. In the field of occupational health and safety, there are circumstances where organizations must adopt innovations to comply with a regulatory standard. Examining how the external environment can facilitate or challenge an organization's change process may add to our understanding of implementation effectiveness. The objective of this study is to describe implementation facilitators and barriers in the context of a regulation designed to promote the uptake of safer engineered medical devices in healthcare. The proposed study will focus on Ontario's safer needle regulation (2007) which requires healthcare organizations to transition to the use of safer engineered medical devices for the prevention of needlestick injuries. A collective case study design will be used to learn from the experiences of three acute care hospitals in the province of Ontario, Canada. Interviews with management and front-line healthcare workers and analysis of supporting documents will be used to describe the implementation experience and examine issues associated with the integration of these devices. The data collection and analysis process will be influenced by a conceptual framework that draws from implementation science and the occupational health and safety literature. The focus of this study in addition to the methodology creates a unique opportunity to contribute to the field of implementation science. First, the study will explore implementation experiences under circumstances where regulatory pressures are influencing the organization's change process. Second, the timing of this study provides an opportunity to focus on issues that arise during later stages of implementation, a phase

Achieving Safety: Safer Sex, Communication, and Desire among Young Gay Men

Science.gov (United States)

Eisenberg, Anna; Bauermeister, Jose A.; Pingel, Emily; Johns, Michelle Marie; Santana, Matthew Leslie

2011-01-01

Conceptualizations of safer sex practices among young gay men (YGM) are frequently structured around communication between partners and the subsequent utilization or absence of condoms in a sexual encounter. Drawing on a sample of 34 in-depth interviews with YGM, ages 18 to 24, the authors explore the ways in which conceptualizations and…

Married women's negotiation for safer sexual intercourse in Kenya: Does experience of female genital mutilation matter?

Science.gov (United States)

Chai, Xiangnan; Sano, Yujiro; Kansanga, Moses; Baada, Jemima; Antabe, Roger

2017-12-01

Married women's ability to negotiate for safer sex is important for HIV prevention in sub-Saharan Africa, including Kenya. Yet, its relationship to female genital mutilation is rarely explored, although female genital mutilation has been described as a social norm and marker of womanhood that can control women's sexuality. Drawing on the social normative influence theory, this study addressed this void in the literature. We analysed data from the 2014 Kenya Demographic and Health Survey using logistic regression. Our sample included 8,602 married women. Two indicators of safer sex, namely the ability to refuse sex and the ability to ask for condom use, were explored. We found that women who had undergone genital mutilation were significantly less likely to report that they can refuse sex (OR=0.87; p<.05) and that they can ask for condom use during sexual intercourse (OR=0.62; p<.001) than their counterparts who had not undergone genital mutilation, while controlling for theoretically relevant variables. Our findings indicate that the experience of female genital mutilation may influence married women's ability to negotiate for safer sex through gendered socialization and expectations. Based on these findings, several policy implications are suggested. For instance, culturally sensitive programmes are needed that target both married women who have undergone genital mutilation and their husbands to understand the importance of safer sexual practices within marriage. Copyright © 2017. Published by Elsevier B.V.

Versatile Chemical Derivatizations to Design Glycol Chitosan-Based Drug Carriers

Directory of Open Access Journals (Sweden)

Sung Eun Kim

2017-10-01

Full Text Available Glycol chitosan (GC and its derivatives have been extensively investigated as safe and effective drug delivery carriers because of their unique physiochemical and biological properties. The reactive functional groups such as the amine and hydroxyl groups on the GC backbone allow for easy chemical modification with various chemical compounds (e.g., hydrophobic molecules, crosslinkers, and acid-sensitive and labile molecules, and the versatility in chemical modifications enables production of a wide range of GC-based drug carriers. This review summarizes the versatile chemical modification methods that can be used to design GC-based drug carriers and describes their recent applications in disease therapy.

A safer alternative: Cannabis substitution as harm reduction.

Science.gov (United States)

Lau, Nicholas; Sales, Paloma; Averill, Sheigla; Murphy, Fiona; Sato, Sye-Ok; Murphy, Sheigla

2015-11-01

Substitution is operationalised as a conscious choice made by users to use one drug instead of, or in conjunction with another based on: perceived safety, level of addiction potential, effectiveness in relieving symptoms, access and level of acceptance. Harm reduction is a set of strategies that aim to minimise problems associated with drug use while recognising that for some users, abstinence may be neither a realistic nor a desirable goal. In this paper, we aim for deeper understandings of older adult cannabis users' beliefs and substitution practices as part of the harm reduction framework. We present selected findings from our qualitative study of Baby Boomer (born 1946-1964) marijuana users in the San Francisco Bay Area. Although the sample consisted of primary cannabis users, many had personal experience with other drugs throughout their lifetimes. Data collection consisted of an audio-recorded, semi-structured in-depth life history interview followed by a questionnaire and health survey. Qualitative interviews were analysed to discover users' harm reduction beliefs and cannabis substitution practices. Study participants described using cannabis as a safer alternative for alcohol, illicit drugs and pharmaceuticals based on their perceptions of less adverse side effects, low-risk for addiction and greater effectiveness at relieving symptoms, such as chronic pain. Cannabis substitution can be an effective harm reduction method for those who are unable or unwilling to stop using drugs completely. More research is needed on cannabis as a safer alternative. © 2015 Australasian Professional Society on Alcohol and other Drugs.

Evaluating the implementation of health and safety innovations under a regulatory context: A collective case study of Ontario’s safer needle regulation

Directory of Open Access Journals (Sweden)

Chambers Andrea

2013-01-01

Full Text Available Abstract Background Implementation effectiveness models have identified important factors that can promote the successful implementation of an innovation; however, these models have been examined within contexts where innovations are adopted voluntarily and often ignore the socio-political and environmental context. In the field of occupational health and safety, there are circumstances where organizations must adopt innovations to comply with a regulatory standard. Examining how the external environment can facilitate or challenge an organization’s change process may add to our understanding of implementation effectiveness. The objective of this study is to describe implementation facilitators and barriers in the context of a regulation designed to promote the uptake of safer engineered medical devices in healthcare. Methods The proposed study will focus on Ontario’s safer needle regulation (2007 which requires healthcare organizations to transition to the use of safer engineered medical devices for the prevention of needlestick injuries. A collective case study design will be used to learn from the experiences of three acute care hospitals in the province of Ontario, Canada. Interviews with management and front-line healthcare workers and analysis of supporting documents will be used to describe the implementation experience and examine issues associated with the integration of these devices. The data collection and analysis process will be influenced by a conceptual framework that draws from implementation science and the occupational health and safety literature. Discussion The focus of this study in addition to the methodology creates a unique opportunity to contribute to the field of implementation science. First, the study will explore implementation experiences under circumstances where regulatory pressures are influencing the organization's change process. Second, the timing of this study provides an opportunity to focus on issues

A systems engineering approach to manage the complexity in sustainable chemical product-process design

DEFF Research Database (Denmark)

Gani, Rafiqul

This paper provides a perspective on model-data based solution approaches for chemical product-process design, which consists of finding the identity of the candidate chemical product, designing the process that can sustainably manufacture it and verifying the performance of the product during...... application. The chemical product tree is potentially very large and a wide range of options exist for selecting the product to make, the raw material to use as well as the processing route to employ. It is shown that systematic computer-aided methods and tools integrated within a model-data based design...

Design of High Quality Chemical XOR Gates with Noise Reduction.

Science.gov (United States)

Wood, Mackenna L; Domanskyi, Sergii; Privman, Vladimir

2017-07-05

We describe a chemical XOR gate design that realizes gate-response function with filtering properties. Such gate-response function is flat (has small gradients) at and in the vicinity of all the four binary-input logic points, resulting in analog noise suppression. The gate functioning involves cross-reaction of the inputs represented by pairs of chemicals to produce a practically zero output when both are present and nearly equal. This cross-reaction processing step is also designed to result in filtering at low output intensities by canceling out the inputs if one of the latter has low intensity compared with the other. The remaining inputs, which were not reacted away, are processed to produce the output XOR signal by chemical steps that result in filtering at large output signal intensities. We analyze the tradeoff resulting from filtering, which involves loss of signal intensity. We also discuss practical aspects of realizations of such XOR gates. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

ïSCOPE: Safer care for older persons (in residential environments: A study protocol

Directory of Open Access Journals (Sweden)

Barnard Debbie

2011-07-01

Full Text Available Abstract Background The current profile of residents living in Canadian nursing homes includes elder persons with complex physical and social needs. High resident acuity can result in increased staff workload and decreased quality of work life. Aims Safer Care for Older Persons [in residential] Environments is a two year (2010 to 2012 proof-of-principle pilot study conducted in seven nursing homes in western Canada. The purpose of the study is to evaluate the feasibility of engaging front line staff to use quality improvement methods to integrate best practices into resident care. The goals of the study are to improve the quality of work life for staff, in particular healthcare aides, and to improve residents' quality of life. Methods/design The study has parallel research and quality improvement intervention arms. It includes an education and support intervention for direct caregivers to improve the safety and quality of their care delivery. We hypothesize that this intervention will improve not only the care provided to residents but also the quality of work life for healthcare aides. The study employs tools adapted from the Institute for Healthcare Improvement's Breakthrough Series: Collaborative Model and Canada's Safer Healthcare Now! improvement campaign. Local improvement teams in each nursing home (1 to 2 per facility are led by healthcare aides (non-regulated caregivers and focus on the management of specific areas of resident care. Critical elements of the program include local measurement, virtual and face-to-face learning sessions involving change management, quality improvement methods and clinical expertise, ongoing virtual and in person support, and networking. Discussion There are two sustainability challenges in this study: ongoing staff and leadership engagement, and organizational infrastructure. Addressing these challenges will require strategic planning with input from key stakeholders for sustaining quality improvement

Computer-Aided Chemical Product Design Framework: Design of High Performance and Environmentally Friendly Refrigerants

DEFF Research Database (Denmark)

Cignitti, Stefano; Zhang, Lei; Gani, Rafiqul

properties and needs should carefully be selected for a given heat pump cycle to ensure that an optimum refrigerant is found? How can cycle performance and environmental criteria be integrated at the product design stage and not in post-design analysis? Computer-aided product design methods enable...... the possibility of designing novel molecules, mixtures and blends, such as refrigerants through a systematic framework (Cignitti et al., 2015; Yunus et al., 2014). In this presentation a computer-aided framework is presented for chemical product design through mathematical optimization. Here, molecules, mixtures...... and blends, are systematically designed through a decomposition based solution method. Given a problem definition, computer-aided molecular design (CAMD) problem is defined, which is formulated into a mixed integer nonlinear program (MINLP). The decomposed solution method then sequentially divides the MINLP...

Electronic cigarettes: a safer alternative or potential poison?

Science.gov (United States)

Smith, Janet E

2014-10-01

Electronic cigarettes have been marketed as a safer alternative to cigarettes, and their use is expanding exponentially. However, there is a severe lack of scientific data about the ingredients in the liquid used in the device and the health consequences of using electronic cigarettes. As technology has outpaced regulations, the production and sale of electronic cigarettes are, as yet, unregulated and do not fall under the purview of the Food and Drug Administration. This article will review the mechanism of action and what is currently known about the safety of electronic cigarettes. The risk of poisoning for children will also be identified, as well as the implications for home healthcare clinicians.

Chemical Composition of a New Taxon, Seseli gummiferum subsp. ilgazense, and its Larvicidal Activity against Aedes aegypti.

Science.gov (United States)

There has been renewed interest in finding the use of natural plant extracts as alternative sources for public health pesticides since these extracts and their constituent compounds are normally considered safer than chemicals for human health and the environment. Mosquitoes are vectors for many pat...

SAFER, an Analysis Method of Quantitative Proteomic Data, Reveals New Interactors of the C. elegans Autophagic Protein LGG-1.

Science.gov (United States)

Yi, Zhou; Manil-Ségalen, Marion; Sago, Laila; Glatigny, Annie; Redeker, Virginie; Legouis, Renaud; Mucchielli-Giorgi, Marie-Hélène

2016-05-06

Affinity purifications followed by mass spectrometric analysis are used to identify protein-protein interactions. Because quantitative proteomic data are noisy, it is necessary to develop statistical methods to eliminate false-positives and identify true partners. We present here a novel approach for filtering false interactors, named "SAFER" for mass Spectrometry data Analysis by Filtering of Experimental Replicates, which is based on the reproducibility of the replicates and the fold-change of the protein intensities between bait and control. To identify regulators or targets of autophagy, we characterized the interactors of LGG1, a ubiquitin-like protein involved in autophagosome formation in C. elegans. LGG-1 partners were purified by affinity, analyzed by nanoLC-MS/MS mass spectrometry, and quantified by a label-free proteomic approach based on the mass spectrometric signal intensity of peptide precursor ions. Because the selection of confident interactions depends on the method used for statistical analysis, we compared SAFER with several statistical tests and different scoring algorithms on this set of data. We show that SAFER recovers high-confidence interactors that have been ignored by the other methods and identified new candidates involved in the autophagy process. We further validated our method on a public data set and conclude that SAFER notably improves the identification of protein interactors.

WAR DSS: A DECISION SUPPORT SYSTEM FOR ENVIRONMENTALLY CONSCIOUS CHEMICAL PROCESS DESIGN

Science.gov (United States)

The second generation of the Waste Reduction (WAR) Algorithm is constructed as a decision support system (DSS) in the design of chemical manufacturing facilities. The WAR DSS is a software tool that can help reduce the potential environmental impacts (PEIs) of industrial chemical...

Intelligent Controller Design for a Chemical Process

OpenAIRE

Mr. Glan Devadhas G; Dr.Pushpakumar S.

2010-01-01

Chemical process control is a challenging problem due to the strong on*line non*linearity and extreme sensitivity to disturbances of the process. Ziegler – Nichols tuned PI and PID controllers are found to provide poor performances for higher*order and non–linear systems. This paper presents an application of one*step*ahead fuzzy as well as ANFIS (adaptive*network*based fuzzy inference system) tuning scheme for an Continuous Stirred Tank Reactor CSTR process. The controller is designed based ...

75 FR 71123 - Agency Information Collection Activities; Proposed Collection; Comment Request; Safer Detergent...

Science.gov (United States)

2010-11-22

..., cleaners, airplane deicers, and fire-fighting foams. Safer surfactants are those that break down quickly to... protected through regulations.gov or e- mail. The regulations.gov Web site is an ``anonymous access'' system... technology and systems for the purposes of collecting, validating, and verifying information, processing and...

Advanced and safer lithium-ion battery based on sustainable electrodes

KAUST Repository

Ding, Xiang

2018-02-17

Seeking advanced and safer lithium-ion battery with sustainable characteristic is significant for the development of electronic devices and electric vehicles. Herein, a new porous TiO nanobundles (PTNBs) is synthesized though a scalable and green hydrothermal strategy from the TiO powders without using any high-cost and harmful organic titanium-based compounds. The PTNBs exhibits an extremely high lithium storage capacity of 296 mAh g at 100 mA g, where the capacity can maintain over 146 mAh g even after 500 cycles at 1000 mA g. To pursue more reliable Li-ion batteries, full batteries of PTNBs/LiNiMnO (x = 0, 0.5) using spinel structured cathode are constructed. The batteries have the features of sustainability and deliver high capacities of 112 mAh g and 102 mAh g with stable capacity retentions of 99% and 90% over 140 cycles. Note that the energy densities can achieve as high as 267 and 270 Wh kg (535 and 540 Wh kg ) respectively, which is feasible to satisfy diverse requirements for energy storage products. We believe that the universal synthetic strategy, appealing structure and intriguing properties of PTNBs is applicable for wider applications, while the concept of sustainable strategy seeking reliable and safer Li-ion battery can attract broad interest.

Advanced and safer lithium-ion battery based on sustainable electrodes

Science.gov (United States)

Ding, Xiang; Huang, Xiaobing; Jin, Junling; Ming, Hai; Wang, Limin; Ming, Jun

2018-03-01

Seeking advanced and safer lithium-ion battery with sustainable characteristic is significant for the development of electronic devices and electric vehicles. Herein, a new porous TiO2 nanobundles (PTNBs) is synthesized though a scalable and green hydrothermal strategy from the TiO2 powders without using any high-cost and harmful organic titanium-based compounds. The PTNBs exhibits an extremely high lithium storage capacity of 296 mAh g-1 at 100 mA g-1, where the capacity can maintain over 146 mAh g-1 even after 500 cycles at 1000 mA g-1. To pursue more reliable Li-ion batteries, full batteries of PTNBs/LiNixMn1-xO4 (x = 0, 0.5) using spinel structured cathode are constructed. The batteries have the features of sustainability and deliver high capacities of 112 mAh gcathode-1 and 102 mAh gcathode-1 with stable capacity retentions of 99% and 90% over 140 cycles. Note that the energy densities can achieve as high as 267 and 270 Wh kgcathode-1 (535 and 540 Wh kganode-1) respectively, which is feasible to satisfy diverse requirements for energy storage products. We believe that the universal synthetic strategy, appealing structure and intriguing properties of PTNBs is applicable for wider applications, while the concept of sustainable strategy seeking reliable and safer Li-ion battery can attract broad interest.

Streamlined Approach for Environmental Restoration (SAFER) Plan for Corrective Action Unit 538: Spill Sites, Nevada Test Site, Nevada, Rev. No.: 0

Energy Technology Data Exchange (ETDEWEB)

Alfred Wickline

2006-04-01

This Streamlined Approach for Environmental Restoration (SAFER) Plan addresses the actions necessary for the closure of Corrective Action Unit (CAU) 538: Spill Sites, Nevada Test Site, Nevada. It has been developed in accordance with the ''Federal Facility Agreement and Consent Order'' (FFACO) (1996) that was agreed to by the State of Nevada, the U.S. Department of Energy (DOE), and the U.S. Department of Defense. A SAFER may be performed when the following criteria are met: (1) Conceptual corrective actions are clearly identified (although some degree of investigation may be necessary to select a specific corrective action before completion of the Corrective Action Investigation [CAI]). (2) Uncertainty of the nature, extent, and corrective action must be limited to an acceptable level of risk. (3) The SAFER Plan includes decision points and criteria for making data quality objective (DQO) decisions. The purpose of the investigation will be to document and verify the adequacy of existing information; to affirm the decision for either clean closure, closure in place, or no further action; and to provide sufficient data to implement the corrective action. The actual corrective action selected will be based on characterization activities implemented under this SAFER Plan. This SAFER Plan identifies decision points developed in cooperation with the Nevada Division of Environmental Protection (NDEP) and where DOE will reach consensus with NDEP before beginning the next phase of work.

Probabilistic risk criteria and their application to nuclear chemical plant design

International Nuclear Information System (INIS)

Arthur, T.; Barnes, D.S.; Brown, M.L.; Taig, A.R.; Johnston, B.D.; Hayns, M.

1989-01-01

A nuclear chemical plant safety strategy is presented. The use of risk criteria in design is demonstrated by reference to a particular area of the plant. This involves the application of Probabilistic Risk Assessment (PRA) techniques. Computer programs developed by the UK Atomic Energy Authority (UKAEA) at its Safety and Reliability Directorate (SRD) are used toe valuate and analyze the resultant fault trees. the magnitude of releases are estimated and individual and societal risks determined. The paper concludes that the application of PRA to a nuclear chemical plant can be structured in such a way as to allow a designer to work to quantitative risk targets

Recommendations for safer radiotherapy: what’s the message?

Energy Technology Data Exchange (ETDEWEB)

Dunscombe, Peter, E-mail: peter.dunscombe@albertahealthservices.ca [Department of Oncology, University of Calgary, Calgary, AB (Canada)

2012-09-28

Radiotherapy, with close to a million courses delivered per year in North America, is a very safe and effective intervention for a devastating disease. However, although rare, several deeply regrettable incidents have occurred in radiotherapy and have rightly been the subject of considerable public interest. Partly in response to reports of these incidents a variety of authoritative organizations across the globe has harnessed the expertise amongst their members in attempts to identify the measures that will make radiotherapy safer. While the intentions of all these organizations are clearly good it is challenging for the health care providers in the clinic to know where to start with so much advice coming from so many directions. Through a mapping exercise we have identified commonalities between recommendations made in seven authoritative documents and identified those issues most frequently cited. The documents reviewed contain a total of 117 recommendations. Using the 37 recommendations in “Towards Safer Radiotherapy” as the initial base layer, recommendations in the other documents were mapped, adding to the base layer to accommodate all the recommendations from the additional six documents as necessary. This mapping exercise resulted in the distillation of the original 117 recommendations down to 61 unique recommendations. Twelve topics were identified in three or more of the documents as being pertinent to the improvement of patient safety in radiotherapy. They are, in order of most to least cited: training, staffing, documentation, incident learning, communication, check lists, quality control and preventive maintenance, dosimetric audit, accreditation, minimizing interruptions, prospective risk assessment, and safety culture. This analysis provides guidance for the selection of those activities most likely to enhance safety and quality in radiotherapy based on the frequency of citation in selected recent authoritative literature.

Recommendations for safer radiotherapy: what’s the message?

International Nuclear Information System (INIS)

Dunscombe, Peter

2012-01-01

Radiotherapy, with close to a million courses delivered per year in North America, is a very safe and effective intervention for a devastating disease. However, although rare, several deeply regrettable incidents have occurred in radiotherapy and have rightly been the subject of considerable public interest. Partly in response to reports of these incidents a variety of authoritative organizations across the globe has harnessed the expertise amongst their members in attempts to identify the measures that will make radiotherapy safer. While the intentions of all these organizations are clearly good it is challenging for the health care providers in the clinic to know where to start with so much advice coming from so many directions. Through a mapping exercise we have identified commonalities between recommendations made in seven authoritative documents and identified those issues most frequently cited. The documents reviewed contain a total of 117 recommendations. Using the 37 recommendations in “Towards Safer Radiotherapy” as the initial base layer, recommendations in the other documents were mapped, adding to the base layer to accommodate all the recommendations from the additional six documents as necessary. This mapping exercise resulted in the distillation of the original 117 recommendations down to 61 unique recommendations. Twelve topics were identified in three or more of the documents as being pertinent to the improvement of patient safety in radiotherapy. They are, in order of most to least cited: training, staffing, documentation, incident learning, communication, check lists, quality control and preventive maintenance, dosimetric audit, accreditation, minimizing interruptions, prospective risk assessment, and safety culture. This analysis provides guidance for the selection of those activities most likely to enhance safety and quality in radiotherapy based on the frequency of citation in selected recent authoritative literature.

Recommendations for safer radiotherapy: what’s the message?

Directory of Open Access Journals (Sweden)

Peter eDunscombe

2012-09-01

Full Text Available Radiotherapy, with close to a million courses delivered per year in North America, is a very safe and effective intervention for a devastating disease. However, although rare, several deeply regrettable incidents have occurred in radiotherapy and have rightly been the subject of considerable public interest. Partly in response to reports of these incidents a variety of authoritative organizations across the globe has harnessed the expertise amongst their members in attempts to identify the measures that will make radiotherapy safer. While the intentions of all these organizations are clearly good it is challenging for the health care providers in the clinic to know where to start with so much advice coming from so many directions. Through a mapping exercise we have identified commonalities between recommendations made in seven authoritative documents and identified those issues most frequently cited. The documents reviewed contain a total of 117 recommendations. Using the 37 recommendations in Towards Safer Radiotherapy as the initial base layer, recommendations in the other documents were mapped, adding to the base layer to accommodate all the recommendations from the additional six documents as necessary. This mapping exercise resulted in the distillation of the original 117 recommendations down to 61 unique recommendations. Twelve topics were identified in three or more of the documents as being pertinent to the improvement of patient safety in radiotherapy. They are, in order of most to least cited: training, staffing, documentation, incident learning, communication, check lists, quality control and preventive maintenance, dosimetric audit, accreditation, minimizing interruptions, prospective risk assessment and safety culture. This analysis provides guidance for the selection of those activities most likely to enhance safety and quality in radiotherapy based on the frequency of citation in selected recent authoritative literature.

Contrast of aseismic design for NPP pressure pipelines of class 2

International Nuclear Information System (INIS)

Bai Wenting; Dai Junwu; Feng Guozhong; Rong Feng

2011-01-01

At present, the RCC-M of French, ASME (2007) of U.S.A and GB50267-97 of China are the primary nuclear technical codes for the design of facilities, systems, and components, which are similar in the classification of nuclear facilities in nu clear power plants, but are not exactly the same in the piping design clauses of the class 2 pressure pipeline. For the earthquake input methods, GB, ASME and RCC-M are basically similar. The hard soil standard response spectrum of GB is relatively safer. RCC-M emphasizes on the impact of the pressure, the GB50267-97 and ASME emphasize more on the weight and other occasional loads such as earthquakes effects. RCC-M is safer than GB and ASME in level D criteria. Case analysis shows that in the conditions of lower pressure and the same stress intensification factor, GB and ASME criteria are safer than RCC-M. (authors)

Computational Chemical Synthesis Analysis and Pathway Design

Directory of Open Access Journals (Sweden)

Fan Feng

2018-06-01

Full Text Available With the idea of retrosynthetic analysis, which was raised in the 1960s, chemical synthesis analysis and pathway design have been transformed from a complex problem to a regular process of structural simplification. This review aims to summarize the developments of computer-assisted synthetic analysis and design in recent years, and how machine-learning algorithms contributed to them. LHASA system started the pioneering work of designing semi-empirical reaction modes in computers, with its following rule-based and network-searching work not only expanding the databases, but also building new approaches to indicating reaction rules. Programs like ARChem Route Designer replaced hand-coded reaction modes with automatically-extracted rules, and programs like Chematica changed traditional designing into network searching. Afterward, with the help of machine learning, two-step models which combine reaction rules and statistical methods became the main stream. Recently, fully data-driven learning methods using deep neural networks which even do not require any prior knowledge, were applied into this field. Up to now, however, these methods still cannot replace experienced human organic chemists due to their relatively low accuracies. Future new algorithms with the aid of powerful computational hardware will make this topic promising and with good prospects.

Green Toxicology – Application of predictive toxicology

DEFF Research Database (Denmark)

Vinggaard, Anne Marie; Wedebye, Eva Bay; Taxvig, Camilla

2014-01-01

safer chemicals and to identify problematic compounds already in use such as industrial compounds, drugs, pesticides and cosmetics, is required. Green toxicology is the application of predictive toxicology to the production of chemicals with the specific intent of improving their design for hazard...

Green Chemistry with Microwave Energy

Science.gov (United States)

Green chemistry utilizes a set of 12 principles that reduces or eliminates the use or generation of hazardous substances in the design, manufacture, and applications of chemical products (1). This newer chemical approach protects the environment by inventing safer and eco-friendl...

A systems engineering approach to manage the complexity in sustainable chemical product-process design

DEFF Research Database (Denmark)

Gani, Rafiqul

This paper provides a perspective on model-data based solution approaches for chemical product-process design, which consists of finding the identity of the candidate chemical product, designing the process that can sustainably manufacture it and verifying the performance of the product during...... framework can manage the complexity associated with product-process problems very efficiently. Three specific computer-aided tools (ICAS, Sustain-Pro and VPPDLab) have been presented and their applications to product-process design, highlighted....

Design for the Environment Products (Raw Data)

Science.gov (United States)

This dataset contains a list of products that carry the Design for the Environment (DfE) label. This mark enables consumers to quickly identify and choose products that can help protect the environment and are safer for families. When you see the DfE logo on a product it means that the DfE scientific review team has screened each ingredient for potential human health and environmental effects and that-based on currently available information, EPA predictive models, and expert judgment-the product contains only those ingredients that pose the least concern among chemicals in their class. Product manufacturers who become DfE partners, and earn the right to display the DfE logo on recognized products, have invested heavily in research, development and reformulation to ensure that their ingredients and finished product line up on the green end of the health and environmental spectrum while maintaining or improving product performance. EPA's Design for the Environment Program (DfE) has allowed use of their logo on over 2500 products. These products are formulated from the safest possible ingredients and have reduced the use of chemicals of concern by hundreds of millions of pounds. A Spanish version of this dataset is available for download at http://www.epa.gov/dfe/pubs/products/list_of_labeled_products.html

Property Modelling for Applications in Chemical Product and Process Design

DEFF Research Database (Denmark)

Gani, Rafiqul

such as database, property model library, model parameter regression, and, property-model based product-process design will be presented. The database contains pure component and mixture data for a wide range of organic chemicals. The property models are based on the combined group contribution and atom...... is missing, the atom connectivity based model is employed to predict the missing group interaction. In this way, a wide application range of the property modeling tool is ensured. Based on the property models, targeted computer-aided techniques have been developed for design and analysis of organic chemicals......, polymers, mixtures as well as separation processes. The presentation will highlight the framework (ICAS software) for property modeling, the property models and issues such as prediction accuracy, flexibility, maintenance and updating of the database. Also, application issues related to the use of property...

Measurement Noninvariance of Safer Sex Self-Efficacy Between Heterosexual and Sexual Minority Black Youth.

Science.gov (United States)

Gerke, Donald; Budd, Elizabeth L; Plax, Kathryn

2016-01-01

Black and lesbian, gay, bisexual, or questioning (LGBQ) youth in the United States are disproportionately affected by HIV and other sexually transmitted diseases (STDs). Although self-efficacy is strongly, positively associated with safer sex behaviors, no studies have examined the validity of a safer sex self-efficacy scale used by many federally funded HIV/STD prevention programs. This study aims to test factor validity of the Sexual Self-Efficacy Scale by using confirmatory factor analysis (CFA) to determine if scale validity varies between heterosexual and LGBQ Black youth. The study uses cross-sectional data collected through baseline surveys with 226 Black youth (15 to 24 years) enrolled in community-based HIV-prevention programs. Participants use a 4-point Likert-type scale to report their confidence in performing 6 healthy sexual behaviors. CFAs are conducted on 2 factor structures of the scale. Using the best-fitting model, the scale is tested for measurement invariance between the 2 groups. A single-factor model with correlated errors of condom-specific items fits the sample well and, when tested with the heterosexual group, the model demonstrates good fit. However, when tested with the LGBQ group, the same model yields poor fit, indicating factorial noninvariance between the groups. The Sexual Self-Efficacy Scale does not perform equally well among Black heterosexual and LGBQ youth. Study findings suggest additional research is needed to inform development of measures for safer sex self-efficacy among Black LGBQ youth to ensure validity of conceptual understanding and to accurately assess effectiveness of HIV/STD prevention interventions among this population.

Circumventing Graphical User Interfaces in Chemical Engineering Plant Design

Science.gov (United States)

Romey, Noel; Schwartz, Rachel M.; Behrend, Douglas; Miao, Peter; Cheung, H. Michael; Beitle, Robert

2007-01-01

Graphical User Interfaces (GUIs) are pervasive elements of most modern technical software and represent a convenient tool for student instruction. For example, GUIs are used for [chemical] process design software (e.g., CHEMCAD, PRO/II and ASPEN) typically encountered in the senior capstone course. Drag and drop aspects of GUIs are challenging for…

Conceptual design of a Raman probe for inclusion in the in-tank cone penetrometer

International Nuclear Information System (INIS)

Kyle, K.R.

1994-01-01

Currently, tank wastes are to be characterized by drilling and physically removing core samples. The cores are analyzed in laboratories in a hot cell environment. The purpose of the cone penetrometer is to bring the interrogative methods to the sample in its native environment, providing faster, safer, and more cost effective tank characterization, both in terms of time and effort. Probes currently exist for the physical characterization of tank wastes in terms of porosity, density, temperature, and electrical conductivity. The main tool for chemical analysis in the in-tank cone penetrometer will be a fiber optic Raman spectroscopy probe, which will be used to collect information about the molecular chemical constituents of the tank wastes. This report addresses the design and implementation of a Raman probe with the in-tank cone penetrometer. The scope of this document includes design specifications and recommendations for the following aspects of the in-tank Raman cone penetrometer probe: cone penetrometer probe interface--an unit for the inclusion of a Raman probe in the in-tank cone penetrometer will be described; window materials--chemically resistant and mechanically stable materials for the cone penetrometer probe interface window will be considered; Raman probes--Raman probes for inclusion in the penetrometer will be discussed

HIV knowledge, risk perception, and safer sex practices among female sex workers in Port Moresby, Papua New Guinea

Science.gov (United States)

Bruce, Eunice; Bauai, Ludwina; Sapuri, Mathias; Kaldor, John M; Fairley, Christopher K; Keogh, Louise A

2011-01-01

Sex workers are considered a high-risk group for sexually transmitted infections, including human immunodeficiency virus (HIV), and are often targeted by prevention interventions with safer sex messages. The purpose of this study was to explore the extent to which knowledge of HIV and perception of risk influence safer sex practices among female sex workers (FSWs) in Port Moresby, Papua New Guinea. FSWs (n = 174) were recruited from 19 sites to participate in the study. Qualitative data were collected using semistructured interviews with FSWs (n = 142) through focus group discussions and (n = 32) individual interviews. In addition, quantitative data were collected from all FSWs using a short structured, demographic questionnaire. Data were analyzed using recurring themes and calculations of confidence intervals. Despite some common misperceptions, overall, most FSWs were basically aware of the risks of HIV and informed about transmission and prevention modalities but used condoms inconsistently. Most reported using condoms ‘sometimes’, almost one-sixth ‘never’ used condoms, only a fraction used condoms ‘always’ with clients, and none used condoms ‘always’ with regular sexual partners (RSPs). Among these FSWs, being knowledgeable about the risks, transmission, and prevention of HIV did not translate into safe sex. The findings suggest that certain contextual barriers to safer sex practices exist. These barriers could heighten HIV vulnerability and possibly may be responsible for infection in FSWs. Specific interventions that focus on improving condom self-efficacy in FSWs and simultaneously target clients and RSPs with safer sex messages are recommended. PMID:21445375

Designing SQCRA as a Software to Semi-quantitative Chemical Risk Assessment in Workplace

Directory of Open Access Journals (Sweden)

Ali Karimi

2014-06-01

Full Text Available Background & Objectives : The aim of chemical risk assessment is to identify and evaluate risks originated from chemicals usages. This study aims to design a practical tool for facilitating chemical risk assessment. Methods: The proposed software was derived from chemical risk assessment method which was recommended by Ministry of Human Resources of Malaysia. All of the processes in question are designed in operating system software. Based on some revisions, this software was developed using Visual Basic (VB titled as SQCRA. The developed software was used for chemical risk assessment in Narges Vegetale Oil Company in Shiraz (center of Iran. Result: The output of software showed that the level of risk derived from sulfuric acid, phosphoric acid, aluminum sulphate, nickel catalyst, acetic acid used as a raw material were 2.4, 2.84, 2.3, 3.5 and 2.66, respectively. Moreover, risk rank and proposed control methods for each of these materials were determined. Conclusions : The developed software calculates the health risk level based on the degree of hazard and exposure in shorttime and without using risk matrix and chemical formula. After determining the risk rank, the software proposes the control procedures to reduce occupational exposure.

Enhancing the design of in situ chemical barriers with multicomponent reactive transport modeling

International Nuclear Information System (INIS)

Sevougian, S.D.; Steefel, C.I.; Yabusaki, S.B.

1994-11-01

This paper addresses the need for systematic control of field-scale performance in the emplacement and operation of in situ chemical treatment barriers; in particular, it addresses the issue of how the local coupling of reaction kinetics and material heterogeneities at the laboratory or bench scale can be accurately upscaled to the field. The authors have recently developed modeling analysis tools that can explicitly account for all relevant chemical reactions that accompany the transport of reagents and contaminants through a chemically and physically heterogeneous subsurface rock or soil matrix. These tools are incorporated into an enhanced design methodology for in situ chemical treatment technologies, and the new methodology is demonstrated in the ongoing design of a field experiment for the In Situ Redox Manipulation (ISRM) project at the U.S. Department of Energy (DOE) Hanford Site. The ISRM design approach, which systematically integrates bench-scale and site characterization information, provides an ideal test for the new reactive transport techniques. The need for the enhanced chemistry capability is demonstrated by an example that shows how intra-aqueous redox kinetics can affect the transport of reactive solutes. Simulations are carried out on massively parallel computer architectures to resolve the influence of multiscale heterogeneities on multicomponent, multidimensional reactive transport. The technology will soon be available to design larger-scale remediation schemes

Tailor-made Design of Chemical Blends using Decomposition-based Computer-aided Approach

DEFF Research Database (Denmark)

Yunus, Nor Alafiza; Manan, Zainuddin Abd.; Gernaey, Krist

(properties). In this way, first the systematic computer-aided technique establishes the search space, and then narrows it down in subsequent steps until a small number of feasible and promising candidates remain and then experimental work may be conducted to verify if any or all the candidates satisfy......Computer aided technique is an efficient approach to solve chemical product design problems such as design of blended liquid products (chemical blending). In chemical blending, one tries to find the best candidate, which satisfies the product targets defined in terms of desired product attributes...... is decomposed into two stages. The first stage investigates the mixture stability where all unstable mixtures are eliminated and the stable blend candidates are retained for further testing. In the second stage, the blend candidates have to satisfy a set of target properties that are ranked according...

Streamlined Approach for Environmental Restoration (SAFER) Plan for Corrective Action Unit 411. Double Tracks Plutonium Dispersion (Nellis), Nevada Test and Training Range, Nevada, Revision 0

Energy Technology Data Exchange (ETDEWEB)

Matthews, Patrick K. [Navarro-Intera, LLC (N-I), Las Vegas, NV (United States)

2015-03-01

This Streamlined Approach for Environmental Restoration (SAFER) Plan addresses the actions needed to achieve closure for Corrective Action Unit (CAU) 411, Double Tracks Plutonium Dispersion (Nellis). CAU 411 is located on the Nevada Test and Training Range and consists of a single corrective action site (CAS), NAFR-23-01, Pu Contaminated Soil. There is sufficient information and historical documentation from previous investigations and the 1996 interim corrective action to recommend closure of CAU 411 using the SAFER process. Based on existing data, the presumed corrective action for CAU 411 is clean closure. However, additional data will be obtained during a field investigation to document and verify the adequacy of existing information, and to determine whether the CAU 411 closure objectives have been achieved. This SAFER Plan provides the methodology to gather the necessary information for closing the CAU. The results of the field investigation will be presented in a closure report that will be prepared and submitted to the Nevada Division of Environmental Protection (NDEP) for review and approval. The site will be investigated based on the data quality objectives (DQOs) developed on November 20, 2014, by representatives of NDEP, the U.S. Air Force (USAF), and the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Field Office. The DQO process was used to identify and define the type, amount, and quality of data needed to determine whether CAU 411 closure objectives have been achieved. The following text summarizes the SAFER activities that will support the closure of CAU 411; Collect environmental samples from designated target populations to confirm or disprove the presence of contaminants of concern (COCs) as necessary to supplement existing information; If COCs are no longer present, establish clean closure as the corrective action; If COCs are present, the extent of contamination will be defined and further corrective actions

A Safer and Convenient Synthesis of Sulfathiazole for Undergraduate Organic and Medicinal Chemistry Classes

Science.gov (United States)

Boyle, Jeff; Otty, Sandra; Sarojini, Vijayalekshmi

2012-01-01

A safer method for the synthesis of the sulfonamide drug sulfathiazole, for undergraduate classes, is described. This method improves upon procedures currently followed in several undergraduate teaching laboratories for the synthesis of sulfathiazole. Key features of this procedure include the total exclusion of pyridine, which has potential…

Crime Prevention through Environmental Design

Science.gov (United States)

Draper, Rick; Cadzow, Emma

2004-01-01

Applying CPTED (Crime Prevention Through Environmental Design) strategies to schools can significantly contribute to a safer learning environment by influencing the behaviour of students and visitors. CPTED has three overlapping primary concepts that are intended to reduce opportunities for crime as well as fear of crime: access control,…

Design and Application of Sensors for Chemical Cytometry.

Science.gov (United States)

Vickerman, Brianna M; Anttila, Matthew M; Petersen, Brae V; Allbritton, Nancy L; Lawrence, David S

2018-02-08

The bulk cell population response to a stimulus, be it a growth factor or a cytotoxic agent, neglects the cell-to-cell variability that can serve as a friend or as a foe in human biology. Biochemical variations among closely related cells furnish the basis for the adaptability of the immune system but also act as the root cause of resistance to chemotherapy by tumors. Consequently, the ability to probe for the presence of key biochemical variables at the single-cell level is now recognized to be of significant biological and biomedical impact. Chemical cytometry has emerged as an ultrasensitive single-cell platform with the flexibility to measure an array of cellular components, ranging from metabolite concentrations to enzyme activities. We briefly review the various chemical cytometry strategies, including recent advances in reporter design, probe and metabolite separation, and detection instrumentation. We also describe strategies for improving intracellular delivery, biochemical specificity, metabolic stability, and detection sensitivity of probes. Recent applications of these strategies to small molecules, lipids, proteins, and other analytes are discussed. Finally, we assess the current scope and limitations of chemical cytometry and discuss areas for future development to meet the needs of single-cell research.

Seriously Mentally Ill Women's Safer Sex Behaviors and the Theory of Reasoned Action

Science.gov (United States)

Randolph, Mary E.; Pinkerton, Steven D.; Somlai, Anton M.; Kelly, Jeffrey A.; McAuliffe, Timothy L.; Gibson, Richard H.; Hackl, Kristin

2009-01-01

Seriously mentally ill women at risk for HIV infection (n = 96) participated in structured interviews assessing sexual and substance-use behavior over a 3-month period. The majority of the women (63.5%) did not use condoms. Consistent with the theory of reasoned action, attitudes toward condom use and perceived social norms about safer sex were…

Priorities in the design of chemical shops at coke plants

Energy Technology Data Exchange (ETDEWEB)

V.I. Rudyka; Y.E. Zingerman; V.V. Grabko; L.A. Kazak [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

2009-07-15

Recent trends in the design of chemical equipment at coke plants are described, through the lens of experience at Giprokoks. The main priorities were to improve the removal of impurities from coke oven gas; to improve equipment design on the basis of new materials; to reduce reagent consumption; to reduce the materials and energy consumed in the construction of new equipment; and to minimize impacts on the environment and worker health. Some technological equipment is briefly characterized.

Urban Vulnerability in Bantul District, Indonesia—Towards Safer and Sustainable Development

Directory of Open Access Journals (Sweden)

R. Rijanta

2012-08-01

Full Text Available Assuring safer and sustainable development in seismic prone areas requires predictive measurements, i.e., hazard, vulnerability and risk assessment. This research aims to assess urban vulnerability due to seismic hazard through a risk based spatial plan. The idea is to indicate current and future potential losses due to specified hazards with given spatial and temporal units. Herein, urban vulnerability refers to the classic separation between social and physical vulnerability assessments. The research area covers six sub-districts in Bantul, Indonesia. It experienced 6.2 Mw earthquakes on May, 27th, 2006 and suffered a death toll of 5700, economic losses of up to 3.1 billion US$ and damage to nearly 80% of a 508 km² area. The research area experienced the following regional issues: (1 seismic hazard; (2 rapid land conversion and (3 domination of low-income group. This research employs spatial multi criteria evaluations (SMCE for social vulnerability (SMCE-SV and for physical vulnerability (SMCE-PV. The research reveals that (1 SMCE-SV and SMCE-PV are empirically possible to indicate the urban vulnerability indices; and (2 integrating the urban vulnerability assessment into a spatial plan requires strategic, technical, substantial and procedural integration. In summary, without adequate knowledge and political support, any manifestation towards safer and sustainable development will remain meager and haphazard.

Design of chemical treatment unit for radioactive liquid wastes in Serpong nuclear facilities

International Nuclear Information System (INIS)

Salimin, Z.; Walman, E.; Santoso, P.; Purnomo, S.; Sugito; Suwardiyono; Wintono

1996-01-01

The chemical treatment unit for radioactive liquid wastes arising from nuclear fuel fabrication, radioisotopes production and radiometallurgy facility has been designed. The design of chemical processing unit is based on the characteristics of liquid wastes containing fluors from uranium fluoride conversion process to ammonium uranyl carbonate on the fuel fabrication. The chemical treatment has the following process steps: coagulation-precipitation of fluoride ion by calcium hydroxide coagulant, separation of supernatant solution from sludge, coagulation of remaining fluoride on the supernatant solution by alum, separation of supernatant from sludge, and than precipitation of fluors on the supernatant by polymer resin WWS 116. The processing unit is composed of 3 storage tanks for raw liquid wastes (capacity 1 m 3 per tank), 5 storage tanks for chemicals (capacity 0.5 m 3 per tank), 2 mixing reactors (capacity 0.5 m 3 per reactor), 1 storage tank for supernatant solution (capacity 1 m 3 ), and 1 storage tank for sludge (capacity 1 m 3 )

Chemical Industry R&D Roadmap for Nanomaterials By Design. From Fundamentals to Function

Energy Technology Data Exchange (ETDEWEB)

none,

2003-12-01

Vision2020 agreed to join NNI and the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (DOE/EERE) in sponsoring the "Nanomaterials and the Chemical Industry Roadmap Workshop" on September 30-October 2, 2002. This roadmap, Chemical Industry R&D Roadmap for Nanomaterials By Design: From Fundamentals to Function, is based on the scientific priorities expressed by workshop participants from the chemical industry, universities, and government laboratories.

Understanding the resistance to creating safer ice hockey: essential points for injury prevention.

Science.gov (United States)

Todd, Ryan A; Soklaridis, Sophie; Treen, Alice K; Bhalerao, Shree U; Cusimano, Michael D

2017-11-27

Despite the known negative health outcomes of concussions in minor level boys' hockey, there has been significant resistance to creating a safer game with less body checking. To better understand cultural barriers that prevent making the sport safer for youth and adolescents, semistructured interviews, with 20 ice hockey stakeholders, were conducted and analysed using thematic analysis. Through this analysis, two primary concepts arose from respondents. The first concept is that body checking, despite the harm it can cause, should be done in a respectful sportsmanlike fashion. The second concept is the contradiction that the game of ice hockey is both dynamic and unchangeable. Using structural functionalist theory, we propose an argument that the unfortunate perpetuation of violence and body checking in youth ice hockey serves to maintain the social order of the game and its culture. Any strategies aimed at modifying and promoting healthy behaviour in the game should take these concepts into account. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Design and Characterisation of Solid Electrolytes for All-Solid-State Lithium Batteries

DEFF Research Database (Denmark)

Sveinbjörnsson, Dadi Þorsteinn

The development of all-solid-state lithium batteries, in which the currently used liquid electrolytes are substituted for solid electrolyte materials, could lead to safer batteries offering higher energy densities and longer cycle lifetimes. Designing suitable solid electrolytes with sufficient...... chemical and electrochemical stability, high lithium ion conduction and negligible electronic conduction remains a challenge. The highly lithium ion conducting LiBH4-LiI solid solution is a promising solid electrolyte material. Solid solutions with a LiI content of 6.25%-50% were synthesised by planetary......-rich microstructures during ball milling is found to significantly influence the conductivity of the samples. The long-range diffusion of lithium ions was measured using quasi-elastic neutron scattering. The solid solutions are found to exhibit two-dimensional conduction in the hexagonal plane of the crystal structure...

An Intelligent System for Modelling, Design and Analysis of Chemical Processes

DEFF Research Database (Denmark)

Gani, Rafiqul

ICAS, Integrated Computer Aided System, is a software that consists of a number of intelligent tools, which are very suitable, among others, for computer aided modelling, sustainable design of chemical and biochemical processes, and design-analysis of product-process monitoring systems. Each...... the computer aided modelling tool will illustrate how to generate a desired process model, how to analyze the model equations, how to extract data and identify the model and make it ready for various types of application. In sustainable process design, the example will highlight the issue of integration...

Integrated Process Design, Control and Analysis of Intensified Chemical Processes

DEFF Research Database (Denmark)

Mansouri, Seyed Soheil

chemical processes; for example, intensified processes such as reactive distillation. Most importantly, it identifies and eliminates potentially promising design alternatives that may have controllability problems later. To date, a number of methodologies have been proposed and applied on various problems......, that the same principles that apply to a binary non-reactive compound system are valid also for a binary-element or a multi-element system. Therefore, it is advantageous to employ the element based method for multicomponent reaction-separation systems. It is shown that the same design-control principles...

Safer Conception for Couples Affected by HIV: Structural and Cultural Considerations in the Delivery of Safer Conception Care in Uganda.

Science.gov (United States)

Mindry, Deborah; Wanyenze, Rhoda K; Beyeza-Kashesya, Jolly; Woldetsadik, Mahlet A; Finocchario-Kessler, Sarah; Goggin, Kathy; Wagner, Glenn

2017-08-01

In countries with high HIV prevalence and high fertility desires, the rights of HIV-affected couples to have children are a pressing issue. Conception among people living with HIV carries risks for both horizontal and vertical HIV transmission. In Uganda ~100,000 HIV-infected women become pregnant annually. Providers face a number of challenges to preventing HIV transmission, reducing unplanned pregnancies, and ensuring safer conception. We report findings from interviews with 27 HIV-affected couples (54 individuals) in Uganda. We explored key cultural and structural factors shaping couples' childbearing decisions. Our data reveal a complex intersection of gender norms, familial expectations, relationship dynamics, and HIV stigma influencing their decisions. Participants provided insights regarding provider bias, stigma, and the gendering of reproductive healthcare. To reduce horizontal transmission HIV and family planning clinics must address men's and women's concerns regarding childbearing with specific attention to cultural and structural challenges.

REACH: next step to a sound chemicals management.

Science.gov (United States)

Van der Wielen, Arnold

2007-12-01

REACH is the new European Regulation for Registration, Evaluation, Authorisation and Restriction of Chemicals. It entered into force on 1st June 2007 to streamline and improve the former legislative framework on new and on existing chemical substances of the European Union. Companies which manufacture or import more than 1 tonne of a substance per year will be required to register the substance at the new EU Chemicals Agency located in Helsinki. REACH places greater responsibility on industry to manage the risks that chemicals may pose to the health and the environment and to provide safety information that will be passed down the supply chain. In principle, REACH applies to all chemicals as such, as components in preparations and as used in articles. REACH is a radical step forward in the EU chemicals management. The onus will move from the authorities to industry. In addition, REACH will allow the further evaluation of substances where there are grounds for concern, foresees an authorisation system for the use of substances of very high concern and a system of restrictions, where applicable, for substances of concern. The Authorisation system will require companies to switch progressively to safer alternatives where a suitable alternative exists. Current use restrictions will remain under REACH system.

Potassium permanganate and tetraethylammonium chloride are a safe and effective substitute for osmium tetroxide in solid-phase fluorescent chemical cleavage of mismatch.

OpenAIRE

Roberts, E; Deeble, V J; Woods, C G; Taylor, G R

1997-01-01

Whilst chemical cleavage of mismatch (CCM) detects all point mutations in DNA, its widespread use has been hampered by the complex multistage methodology and the need for toxic chemicals, in particular osmium tetroxide. Here we show that osmium tetroxide can be replaced by potassium permanganate, giving the same spectrum of mutation detection, but with greater sensitivity. The use of potassium permanganate is compatible with solid phase capture and fluorescent detection, giving a safer method...

A Peer-Led, Social Media-Delivered, Safer Sex Intervention for Chinese College Students: Randomized Controlled Trial.

Science.gov (United States)

Sun, Wai Han; Wong, Carlos King Ho; Wong, William Chi Wai

2017-08-09

The peer-led, social media-delivered intervention is an emerging method in sexual health promotion. However, no research has yet investigated its effectiveness as compared with other online channels or in an Asian population. The objective of this study is to compare a peer-led, social media-delivered, safer sex intervention with a sexual health website. Both conditions target Chinese college students in Hong Kong. A randomized controlled trial was conducted with a peer-led, safer sex Facebook group as the intervention and an existing online sexual health website as the control. The intervention materials were developed with peer input and followed the information-motivation-behavioral skills model; the intervention was moderated by peer educators. The participants filled out the online questionnaires before and after the 6-week intervention period. Outcome evaluations included safer sex attitudes, behavioral skills, and behaviors, while process evaluation focused on online experience, online-visiting frequency, and online engagement. The effect of online-visiting frequency and online engagement on outcome variables was investigated. Of 196 eligible participants-100 in the control group and 96 in the intervention group-who joined the study, 2 (1.0%) control participants joined the Facebook group and 24 of the remaining 194 participants (12.4%) were lost to follow-up. For the process evaluation, participants in the intervention group reported more satisfying online experiences (Psocial media-delivered, safer sex intervention was found to be feasible and effective in improving attitudes toward condom use and behavioral skills, but was not significantly more effective than a website. Future research may focus on the long-term effectiveness and cost-effectiveness of this popular method, as well as the potential cultural differences of using social media between different countries. Chinese Clinical Trial Registry (ChiCTR): ChiCTR-IOR-16009495; http

Towards safer surgery in patients with sickle cell disease

International Nuclear Information System (INIS)

Meshikhes, Abdul-Wahed N.

2007-01-01

Surgery in patients with sickle cell disease (SCD) has been associated with high morbidity and mortality. In recent years, a marked improvement in the safety of surgery and anesthesia in this high-risk group of patients has been witnessed; owing to the improvements in surgical and anesthetic care, greater awareness of pathophysiology of disease, proper perioperative preparation and attention to factors predisposing to vasoocclusive crises. However, this is not paralleled by similar improvement in countries where the disease is not prevalent. Greater population mobility in recent years makes recognition of surgical manifestations of the disease and awareness of perioperative management of sickle cell patients undergoing surgical interventions of paramount importance. This article aims to summarize steps towards safer surgery in patients with SCD. (author)

Develop and implement preconditioning techniques to control face ejection rockbursts for safer mining in seismically hazardous areas

CSIR Research Space (South Africa)

Toper, AZ

1998-01-01

Full Text Available This research report discusses the development of preconditioning techniques to control face bursts, for safer mining in seismically hazardous areas. Preconditioning involves regularly setting off carefully tailored blasts in the fractured rock...

Acceptability and preferences for safer conception HIV prevention strategies: a qualitative study.

Science.gov (United States)

Schwartz, Sheree R; West, Nora; Phofa, Rebecca; Yende, Nompumelelo; Sanne, Ian; Bassett, Jean; Van Rie, Annelies

2016-10-01

Safer conception strategies to reduce the HIV transmission risk include antiretroviral therapy for HIV-positive partners, pre-exposure prophylaxis for HIV-negative partners, condomless sex limited to fertile periods, and home-based self-insemination. Resistance to taking treatment or cultural concerns may limit uptake of strategies and intervention success. Understanding the acceptability and preferences between different approaches is important to optimise service delivery. Between February and July 2013, 42 adults (21 HIV-positive and 21 HIV-negative) receiving primary care at Witkoppen Health and Welfare Centre in Johannesburg, South Africa, participated in focus group discussions or in-depth interviews. Themes were analysed using a grounded theory approach. Acceptability of antiretroviral-based strategies varied. Concerns over side effects, antiretroviral treatment duration and beliefs that treatment is only for the sick were common barriers; however, desperation for a child was noted as a facilitator for uptake. HIV-negative men and HIV-positive women had favourable attitudes towards self-insemination, though paternity and safety concerns were raised. Self-insemination was generally preferred over pre-exposure prophylaxis by HIV-negative men, and antiretroviral-based strategies were preferred by couples with HIV-negative female partners, despite concerns raised about condomless sex while virally suppressed. Knowledge about the fertile window was low. A strong counselling component will be required for effective uptake and adherence to safer conception services. © The Author(s) 2016.

Implications and control of fuel-cladding chemical interaction for LMFBR fuel pin design

International Nuclear Information System (INIS)

Roake, W.E.

1977-01-01

Fuel-cladding-chemical-interaction (FCCI) is typically incorporated into the design of an LMFBR fuel pin as a wastage allowance. Several interrelated factors are considered during the evolution of an LMFBR fuel pin design. Those which are indirectly affected by FCCI include: allowable pin power, fuel restructuring, fission gas migration and release from the fuel, fuel cracking, fuel swelling, in-reactor cladding creep, cladding swelling, and the cladding mechanical strain. Chemical activity of oxygen is the most readily controlled factor in FCCI. Two methods are being investigated: control of total oxygen inventory by limiting fuel O/M, and control of oxygen activity with buffer metals

Essentials of water systems design in the oil, gas, and chemical processing industries

CERN Document Server

Bahadori, Alireza; Boyd, Bill

2013-01-01

Essentials of Water Systems Design in the Oil, Gas and Chemical Processing Industries provides valuable insight for decision makers by outlining key technical considerations and requirements of four critical systems in industrial processing plants—water treatment systems, raw water and plant water systems, cooling water distribution and return systems, and fire water distribution and storage facilities. The authors identify the key technical issues and minimum requirements related to the process design and selection of various water supply systems used in the oil, gas, and chemical processing industries. This book is an ideal, multidisciplinary work for mechanical engineers, environmental scientists, and oil and gas process engineers.

Implications and control of fuel-cladding chemical interaction for LMFBR fuel pin design

Energy Technology Data Exchange (ETDEWEB)

Roake, W E [Westinghouse-Hanford Co., Richland, WA (United States)

1977-04-01

Fuel-cladding-chemical-interaction (FCCI) is typically incorporated into the design of an LMFBR fuel pin as a wastage allowance. Several interrelated factors are considered during the evolution of an LMFBR fuel pin design. Those which are indirectly affected by FCCI include: allowable pin power, fuel restructuring, fission gas migration and release from the fuel, fuel cracking, fuel swelling, in-reactor cladding creep, cladding swelling, and the cladding mechanical strain. Chemical activity of oxygen is the most readily controlled factor in FCCI. Two methods are being investigated: control of total oxygen inventory by limiting fuel O/M, and control of oxygen activity with buffer metals.

Implementation Plan for Chemical Industry R&D Roadmap for Nanomaterials by Design

Energy Technology Data Exchange (ETDEWEB)

none,

2006-04-01

The purpose of this effort is to develop an implementation plan to realize the vision and goals identified in the Chemical Industry R&D Roadmap for Nanomaterials By Design: From Fundamentals to Function.

New research discovery may mean less radioactive contamination, safer nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Murph, S. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-06-20

Murph has now made another nanoparticle breakthrough that could benefit various work environments such as nuclear power plants. Murph and her team have created nanoparticle treated stainless steel filters that are capable to capturing radioactive vapor materials. Just like air filters capture dust and dirt, these filters are capable of capturing large amounts of radioactive vapors. The new research may one day mean that nuclear power plant workers, and other workers in related fields, will have a safer working environment.

Property Model-based Tailor-made Design of Chemical-based Products

DEFF Research Database (Denmark)

Kalakul, Sawitree

Computer-aided model-based methods and tools are increasingly playing important roles in chemical product design. They have the potential to very quickly search for and identify reliable product candidates that can then be verified through experiments. Inthis way, the time and resources spent...... on experiment are reduced leading to faster and cheaper to market the products. The tools also help to manage the solution of product design problems, which usually require efficient handling of model-data-knowledge from different sources and at different time and size scales. The main contribution...... the needed template for a desired product is not available. VPPD-Lab employs a suite of algorithms(such as database search, molecular and mixture blend design) and toolboxes (such asproperty calculations and property model consistency tests) for specific product property prediction, design, and/or analysis...

Understanding Barriers to Safer Sex Practice in Zimbabwean Marriages: Implications for Future HIV Prevention Interventions

Science.gov (United States)

Mugweni, Esther; Omar, Mayeh; Pearson, Stephen

2015-01-01

Against the backdrop of high human immunodeficiency virus (HIV) prevalence in stable relationships in Southern Africa, our study presents sociocultural barriers to safer sex practice in Zimbabwean marriages. We conducted 36 in-depth interviews and four focus group discussions with married men and women in Zimbabwe in 2008. Our aim was to identify…

Design of an Emulsion-based Personal Detergent through a Model-based Chemical Product Design Methodology

DEFF Research Database (Denmark)

Mattei, Michele; Hill, Michael; Kontogeorgis, Georgios

2013-01-01

An extended systematic methodology for the design of emulsion-based Chemical products is presented. The methodology consists of a model-based framework involving seven sequential hierarchical steps: starting with the identification of the needs to be satisfied by the product and then adding one-b...... to obtain one or more candidate formulations. A conceptual casestudy representing a personal detergent is presented to highlight the methodology....

Design of an Emulsion-based Personal Detergent through a Model-based Chemical Product Design Methodology

DEFF Research Database (Denmark)

Mattei, Michele; Hill, Michael; Kontogeorgis, Georgios

2013-01-01

An extended systematic methodology for the design of emulsion-based Chemical products is presented. The methodology consists of a model-based framework involving seven sequential hierarchical steps: starting with the identification of the needs to be satisfied by the product and then adding one...... to obtain one or more candidate formulations. A conceptual casestudy representing a personal detergent is presented to highlight the methodology....

Female gratification, sexual power and safer sex

DEFF Research Database (Denmark)

Skafte, Ina; Silberschmidt, Margrethe

2014-01-01

The gender-based response to HIV in sub-Saharan Africa has tended to reinforce normative stereotypes of women as subordinated, passive and powerless victims, in particular in sexual relations. However, based on qualitative data from Rwanda, this paper argues that such conceptualisations fail to r...... both to practice safer sex and to access decision-making power and material resources. This suggests that inherent in sexual relations is a potential for the empowerment of women and the transformation of gender relations.......The gender-based response to HIV in sub-Saharan Africa has tended to reinforce normative stereotypes of women as subordinated, passive and powerless victims, in particular in sexual relations. However, based on qualitative data from Rwanda, this paper argues that such conceptualisations fail...... to recognise that while women do comply with prevalent social norms, they also challenge these norms and sex becomes a domain in which they can exert power. Female sexuality and sexual gratification - acknowledged and valued by women as well as men - play a pivotal role in the Rwandese mode of sexual...

Retrofitting existing chemical scrubbers to biotrickling filters for H2S emission control.

Science.gov (United States)

Gabriel, David; Deshusses, Marc A

2003-05-27

Biological treatment is a promising alternative to conventional air-pollution control methods, but thus far biotreatment processes for odor control have always required much larger reactor volumes than chemical scrubbers. We converted an existing full-scale chemical scrubber to a biological trickling filter and showed that effective treatment of hydrogen sulfide (H2S) in the converted scrubber was possible even at gas contact times as low as 1.6 s. That is 8-20 times shorter than previous biotrickling filtration reports and comparable to usual contact times in chemical scrubbers. Significant removal of reduced sulfur compounds, ammonia, and volatile organic compounds present in traces in the air was also observed. Continuous operation for >8 months showed stable performance and robust behavior for H2S treatment, with pollutant-removal performance comparable to that achieved by using a chemical scrubber. Our study demonstrates that biotrickling filters can replace chemical scrubbers and be a safer, more economical technique for odor control.

Design and Fabrication of Piezoresistive Based Encapsulated Poly-Si Cantilevers for Bio/chemical Sensing

Science.gov (United States)

Krishna, N. P. Vamsi; Murthy, T. R. Srinivasa; Reddy, K. Jayaprakash; Sangeeth, K.; Hegde, G. M.

Cantilever-based sensing is a growing research field not only within micro regime but also in nano technology. The technology offers a method for rapid, on-line and in-situ monitoring of specific bio/chemical substances by detecting the nanomechanical responses of a cantilever sensor. Cantilever with piezoresistive based detection scheme is more attractive because of its electronics compatibility. Majority of commercially available micromachined piezoresistive sensors are bulk micromachined devices and are fabricated using single crystal silicon wafers. As substrate properties are not important in surface micromachining, the expensive silicon wafers can be replaced by cheaper substrates, such as poly-silicon, glass or plastic. Here we have designed SU-8 based bio/chemical compatible micro electro mechanical device that includes an encapsulated polysilicon piezoresistor for bio/chemical sensing. In this paper we report the design, fabrication and analysis of the encapsulated poly-Si cantilevers. Design and theoretical analysis are carried out using Finite Element Analysis software. For fabrication of poly-silicon piezoresistive cantilevers we followed the surface micromachining process steps. Preliminary characterization of the cantilevers is presented.

The substitution of hazardous chemicals in the international context - Opportunity for promoting sustainable chemistry

DEFF Research Database (Denmark)

Weber, R.; Lissner, L.; Fantke, Peter

While a wide range of sustainable/green chemicals for various applications is available, often only certain types of hazardous or unsustainably produced chemicals are continued to be used out of different reasons (“lock-in problem”) 1,2. One challenge is that policy makers and industries...... in the alternatives assessment process on international level. The POPs phase out document links also to the web-platform SUBSPORT (www.subsport.eu) which has been developed in the frame of an EU project for safer alternatives to toxic chemicals. In this presentation the Stockholm Convention alternatives assessment...... in particular in developing and transition countries do not know about more sustainable and green alternatives for a chemical in a particular application. Methodologies and tools are, hence, needed for the communication and dissemination of information on more sustainable alternatives. The substitution...

Toxic industrial chemicals (TICs) as asymmetric weapons: the design basis threat

International Nuclear Information System (INIS)

Skinner, L.

2009-01-01

Asymmetric warfare concepts relate well to the use of improvised chemical weapons against urban targets. Sources of information on toxic industrial chemicals (TICs) and lists of high threat chemicals are available that point to likely choices for an attack. Accident investigations can be used as a template for attacks, and to judge the possible effectiveness of an attack using TICs. The results of a chlorine rail car accident in South Carolina, USA and the Russian military assault on a Moscow theater provide many illustrative points for similar incidents that mighty be carried out deliberately. Computer modeling of outdoor releases shows how an attack might take into consideration issues of stand-off distance and dilution. Finally, the preceding may be used to estimate with some accuracy the design basis threat posed by the used of TICs as weapons.(author)

Special Aviation Fire and Explosion Reduction (SAFER) Advisory Committee. Volume IIB.

Science.gov (United States)

1980-06-26

alternates be identified collectively as the "SAFER Advisory Committee," or simply the Committee. 2. That the Committee serve as the decision-making body...iefta 10 e - Avisttln Kal £s1a~r*W. Odke Of W- rPs A..ecn~e "I t12, AdOWt(~ 0 W ae Itirea~t pgsPer110 I’o Mhet Cuxlser Attenton. Rulem LlozkCL is ira...factors, such as bur.t.it ot inha~ation of toxic gases. It is only in recent years that t-e :37 o actempted to collect such data. 4. Except for the KC

Cutting the cost of South African antiretroviral therapy using newer, safer drugs

Directory of Open Access Journals (Sweden)

W F Venter

2017-01-01

Full Text Available Antiretrovirals are a significant cost driver for HIV programmes. Current first-line regimens have performed well in real-life programmes, but have a low barrier to virological resistance and still carry toxicity that limits adherence. New drug developments may mean that we have access to safer, more robust and cheaper regimens, but only if the appropriate clinical trials are conducted. We briefly discuss these trials, and demonstrate the large cost savings to the South African HIV programme if these are successful.

Design of lane merges at rural freeway construction work zones.

Science.gov (United States)

2012-10-01

Practices for the design and control of work zone traffic control configurations have evolved over time : to reflect safer and more efficient management practices. However, they are also recognized as areas : of frequent vehicle conflicts that can ca...

Applicable safety-related design and operations considerations from the oil and chemical industries

International Nuclear Information System (INIS)

Mulvihill, R.J.; Deshotels, R.L.; Master, C.A.

1987-01-01

Fluor Daniel has conducted several hazards and risk analyses on petroleum and chemical facilities. These analyses included qualitative hazards and operability (HAZOP) studies, preliminary hazards analyses, and qualitative fault-tree analysis as well as quantitative event-tree/fault-tree risk analysis. Several design-related problem areas were uncovered as a result of these analyses as well as deficiencies in operations and maintenance. Design deficiency areas include potential common-mode failures associated with redundant functions sharing a common distributed digital control (DDC) logic circuit board and failures in pressure relief systems. Many of the design weaknesses and potential operator errors discussed have a direct counterpart in nuclear fuel processing plants and nuclear power reactors. Counterparts that are discussed are common cause/common mode failures in control systems and failures in pressure relief systems. Overpressurization of piping and vessels resulting in rupture is discussed. Mitigating design features and operations procedures that have been implemented in the chemical process industry are described and their applicability to the nuclear industry is discussed

Designing a Safer Interactive Healthcare System - The Impact of Authentic User Participation

Science.gov (United States)

Went, Kathryn L.; Gregor, Peter; Ricketts, Ian W.

Information technology has been widely promoted in the healthcare sector to improve current practice and patient safety. However, end users are seldom involved extensively in the design and development of healthcare systems, with lip service often paid to the idea of true user involvement. In this case study the impact of sustained authentic user participation was explored using an interdisciplinary team, consisting of experts both in interaction and healthcare design and consultant anaesthetists, nurses, and pharmacists, to create an electronic prescribing and administration system. This paper details the interface that was created and provides examples of the way in which the design evolved in response to the sustained authentic user participation methods. The working prototype both reduced the opportunity for user error and was preferred by its users to the existing manual system.

Motives and barriers to safer sex and regular STI testing among MSM soon after HIV diagnosis

NARCIS (Netherlands)

Heijman, Titia; Zuure, Freke; Stolte, Ineke; Davidovich, Udi

2017-01-01

Understanding why some recently with HIV diagnosed men who have sex with men (MSM) choose for safer sex and regular STI testing, whereas others do not, is important for the development of interventions that aim to improve the sexual health of those newly infected. To gain insight into motives and

Designing new nuclear chemical processing plants for safeguards accountability

International Nuclear Information System (INIS)

Sprouse, K.M.

1987-01-01

New nuclear chemical processing plants will be required to develop material accountability control limits from measurement error propagation analysis rather than historical inventory difference data as performed in the past. In order for measurement error propagation methods to be viable alternatives, process designers must ensure that two nondimensional accountability parameters are maintained below 0.1. These parameters are ratios between the material holdup increase and the variance in inventory difference measurement uncertainty. Measurement uncertainty data for use in error propagation analysis is generally available in the open literature or readily derived from instrument calibration data. However, nuclear material holdup data has not been adequately developed for use in the material accountability design process. Long duration development testing on isolated unit operations is required to generate this necessary information

Designing Safer and Greener Antibiotics

Directory of Open Access Journals (Sweden)

Nicholas Gathergood

2013-09-01

Full Text Available Since the production of the first pharmaceutically active molecules at the beginning of the 1900s, drug molecules and their metabolites have been observed in the environment in significant concentrations. In this review, the persistence of antibiotics in the environment and their associated effects on ecosystems, bacterial resistance and health effects will be examined. Solutions to these problems will also be discussed, including the pharmaceutical industries input, green chemistry, computer modeling and representative ionic liquid research.

Design of chemical space networks using a Tanimoto similarity variant based upon maximum common substructures.

Science.gov (United States)

Zhang, Bijun; Vogt, Martin; Maggiora, Gerald M; Bajorath, Jürgen

2015-10-01

Chemical space networks (CSNs) have recently been introduced as an alternative to other coordinate-free and coordinate-based chemical space representations. In CSNs, nodes represent compounds and edges pairwise similarity relationships. In addition, nodes are annotated with compound property information such as biological activity. CSNs have been applied to view biologically relevant chemical space in comparison to random chemical space samples and found to display well-resolved topologies at low edge density levels. The way in which molecular similarity relationships are assessed is an important determinant of CSN topology. Previous CSN versions were based on numerical similarity functions or the assessment of substructure-based similarity. Herein, we report a new CSN design that is based upon combined numerical and substructure similarity evaluation. This has been facilitated by calculating numerical similarity values on the basis of maximum common substructures (MCSs) of compounds, leading to the introduction of MCS-based CSNs (MCS-CSNs). This CSN design combines advantages of continuous numerical similarity functions with a robust and chemically intuitive substructure-based assessment. Compared to earlier version of CSNs, MCS-CSNs are characterized by a further improved organization of local compound communities as exemplified by the delineation of drug-like subspaces in regions of biologically relevant chemical space.

Are nuclear ships environmentally safer than conventionally powered ships

International Nuclear Information System (INIS)

Bone, C.A.; Molgaard, C.A.; Helmkamp, J.C.; Golbeck, A.L.

1988-01-01

An epidemiologic analysis was conducted to determine if risk of hospitalization varied by age, ship type, or occupation between nuclear and conventional powered ship crews in the U.S. Navy. Study cohorts consisted of all male enlisted personnel who served exclusively aboard conventional or nuclear powered aircraft carriers and cruisers during the years 1975-1979; cases were those men hospitalized during this period (N = 48,242). Conventional ship personnel showed significantly elevated rates of injury and disease when compared to nuclear ship personnel. The largest relative risks by age occurred for conventional ship crewmen less than 30 years old. Seaman, logistics (supply), and healthcare personnel serving aboard conventional ships comprised the occupational groups exhibiting the highest hospitalization rate differentials. The results strongly suggest that nuclear ships provide a healthier, safer working and living environment than conventional ships

Designing of the chemical composition of steels basing on the hardenability of constructional steels

International Nuclear Information System (INIS)

Dobrzanski, L.A.; Sitek, W.

2003-01-01

The paper presents the original method of modelling of the relationships between chemical composition of alloy constructional steel and its hardenability, employing neural networks. Basing on the experimental results of the hardenability investigations, which employed Jominy method, the model of the neural networks was developed and fully verified experimentally. The model makes it possible to obtain Jominy hardenability curves basing on the steel chemical composition. The model of neural networks, making it possible to design the steel chemical composition, basing on the known Jominy hardenability curve shape, was developed also and fully verified numerically. (author)

Fertility Intentions, Pregnancy, and Use of PrEP and ART for Safer Conception Among East African HIV Serodiscordant Couples.

Science.gov (United States)

Heffron, Renee; Thomson, Kerry; Celum, Connie; Haberer, Jessica; Ngure, Kenneth; Mugo, Nelly; Bukusi, Elizabeth; Katabira, Elly; Odoyo, Josephine; Bulya, Nulu; Asiimwe, Stephen; Tindimwebwa, Edna; Baeten, Jared M

2017-09-11

African HIV serodiscordant couples often desire pregnancy, despite sexual HIV transmission risk during pregnancy attempts. Pre-exposure prophylaxis (PrEP) and antiretroviral therapy (ART) reduce HIV risk and can be leveraged for safer conception but how well these strategies are used for safer conception is not known. We conducted an open-label demonstration project of the integrated delivery of PrEP and ART among 1013 HIV serodiscordant couples from Kenya and Uganda followed quarterly for 2 years. We evaluated fertility intentions, pregnancy incidence, the use of PrEP and ART during peri-conception, and peri-conception HIV incidence. At enrollment, 80% of couples indicated a desire for more children. Pregnancy incidence rates were 18.5 and 18.7 per 100 person years among HIV-uninfected and HIV-infected women, and higher among women who recently reported fertility intention (adjusted odds ratio 3.43, 95% CI 2.38-4.93) in multivariable GEE models. During the 6 months preceding pregnancy, 82.9% of couples used PrEP or ART and there were no HIV seroconversions. In this cohort with high pregnancy rates, integrated PrEP and ART was readily used by HIV serodiscordant couples, including during peri-conception periods. Widespread scale-up of safer conception counseling and services is warranted to respond to strong desires for pregnancy among HIV-affected men and women.

A participatory systems approach to design for safer integrated medicine management.

Science.gov (United States)

Jun, Gyuchan Thomas; Canham, Aneurin; Altuna-Palacios, Ander; Ward, James R; Bhamra, Ran; Rogers, Stephen; Dutt, Amalin; Shah, Priyal

2018-01-01

It is recognised that whole systems approaches are required in the design and development of complex health care services. Application of a systems approach benefits from the involvement of key stakeholders. However, participation in the context of community based health care is particularly challenging due to busy and geographically distributed stakeholders. This study used action research to investigate what processes and methods were needed to successfully employ a participatory systems approach. Three participatory workshops planned and facilitated by method experts were held with 30 representative stakeholders. Various methods were used with them and evaluated through an audit of workshop outputs and a qualitative questionnaire. Findings on the method application and participation are presented and methodological challenges are discussed with reference to further research. Practitioner Summary: This study provides practical insights on how to apply a participatory systems approach to complex health care service design. Various template-based methods for systems thinking and risk-based thinking were efficiently and effectively applied with stakeholders.

Multi-level Correlates of Safer Conception Methods Awareness and Attitudes Among Ugandan HIV Clients with Fertility Intentions.

Science.gov (United States)

Wagner, Glenn J; Woldetsadik, Mahlet A; Beyeza-Kashesya, Jolly; Goggin, Kathy; Mindry, Deborah; Finocchario-Kessler, Sarah; Khanakwa, Sarah; Wanyenze, Rhoda K

2016-03-01

Many people living with HIV desire childbearing, but low cost safer conception methods (SCM) such as timed unprotected intercourse (TUI) and manual self-insemination (MSI) are rarely used. We examined awareness and attitudes towards SCM, and the correlates of these constructs among 400 HIV clients with fertility intentions in Uganda. Measures included awareness, self-efficacy, and motivation regarding SCM, as well as demographics, health management, partner and provider characteristics. Just over half knew that MSI (53%) and TUI (51%) reduced transmission risk during conception, and 15% knew of sperm washing and pre-exposure prophylaxis. In separate regression models for SCM awareness, motivation, and self-efficacy, nearly all independent correlates were related to the partner, including perceived willingness to use SCM, knowledge of respondent's HIV status, HIV-seropositivity, marriage and equality in decision making within the relationship. These findings suggest the importance of partners in promoting SCM use and partner inclusion in safer conception counselling.

Chemical engineering challenges and investment opportunities in sustainable energy.

Science.gov (United States)

Heller, Adam

2008-01-01

The chemical and energy industries are transforming as they adjust to the new era of high-priced petroleum and severe global warming. As a result of the transformation, engineering challenges and investment opportunities abound. Rapid evolution and fast growth are expected in cathode and anode materials as well as polymeric electrolytes for vehicular batteries and in high-performance polymer-ceramic composites for wind turbines, fuel-efficient aircraft, and lighter and safer cars. Unique process-engineering opportunities exist in sand-oil, coal, and possibly also shale liquefaction to produce transportation fuel; and also in genetic engineering of photosynthesizing plants and other organisms for their processing into high-performance biodegradable polymers and high-value-added environmentally friendly chemicals. Also, research on the feasibility of mitigation of global warming through enhancement of CO(2) uptake by the southern oceans by fertilization with trace amounts of iron is progressing. Because chemical engineers are uniquely well trained in mathematical modeling of mass transport, flow, and mixing, and also in cost analysis, they are likely to join the oceanographers and marine biologists in this important endeavor.

Three-dimensional multislice spiral computed tomographic angiography: a potentially useful tool for safer free tissue transfer to complicated regions

DEFF Research Database (Denmark)

Demirtas, Yener; Cifci, Mehmet; Kelahmetoglu, Osman

2009-01-01

Three-dimensional multislice spiral computed tomographic angiography (3D-MSCTA) is a minimally invasive method of vascular mapping. The aim of this study was to evaluate the clinical usefulness of this imaging technique in delineating the recipient vessels for safer free tissue transfer to compli......Three-dimensional multislice spiral computed tomographic angiography (3D-MSCTA) is a minimally invasive method of vascular mapping. The aim of this study was to evaluate the clinical usefulness of this imaging technique in delineating the recipient vessels for safer free tissue transfer...... be kept in mind, especially inthe patients with peripheral vascular disease. 3D-MSCTA has the potential to replace digital subtraction angiography for planning of microvascular reconstructions and newer devices with higher resolutions will probably increase the reliability of this technique. (c) 2009...

DCEO Biotechnology: Tools To Design, Construct, Evaluate, and Optimize the Metabolic Pathway for Biosynthesis of Chemicals

DEFF Research Database (Denmark)

Chen, Xiulai; Gao, Cong; Guo, Liang

2018-01-01

, and pathway optimization at the systems level, offers a conceptual and technological framework to exploit potential pathways, modify existing pathways and create new pathways for the optimal production of desired chemicals. Here, we summarize recent progress of DCEO biotechnology and examples of its......Chemical synthesis is a well established route for producing many chemicals on a large scale, but some drawbacks still exist in this process, such as unstable intermediates, multistep reactions, complex process control, etc. Biobased production provides an attractive alternative to these challenges......, but how to make cells into efficient factories is challenging. As a key enabling technology to develop efficient cell factories, design-construction-evaluation-optimization (DCEO) biotechnology, which incorporates the concepts and techniques of pathway design, pathway construction, pathway evaluation...

InP/ZnS as a safer alternative to CdSe/ZnS core/shell quantum dots: in vitro and in vivo toxicity assessment

Science.gov (United States)

Brunetti, Virgilio; Chibli, Hicham; Fiammengo, Roberto; Galeone, Antonio; Malvindi, Maria Ada; Vecchio, Giuseppe; Cingolani, Roberto; Nadeau, Jay L.; Pompa, Pier Paolo

2012-12-01

We show that water soluble InP/ZnS core/shell QDs are a safer alternative to CdSe/ZnS QDs for biological applications, by comparing their toxicity in vitro (cell culture) and in vivo (animal model Drosophila). By choosing QDs with comparable physical and chemical properties, we find that cellular uptake and localization are practically identical for these two nanomaterials. Toxicity of CdSe/ZnS QDs appears to be related to the release of poisonous Cd2+ ions and indeed we show that there is leaching of Cd2+ ions from the particle core despite the two-layer ZnS shell. Since an almost identical amount of In(iii) ions is observed to leach from the core of InP/ZnS QDs, their very low toxicity as revealed in this study hints at a much lower intrinsic toxicity of indium compared to cadmium.

FMEA and consideration of real work situations for safer design of production systems.

Science.gov (United States)

Lux, Aurélien; Mawo De Bikond, Johann; Etienne, Alain; Quillerou-Grivot, Edwige

2016-12-01

Production equipment designers must ensure the health and safety of future users; in this regard, they augment requirements for standardizing and controlling operator work. This contrasts with the ergonomic view of the activity, which recommends leaving operators leeway (margins for manoeuvre) in performing their task, while safeguarding their health. Following a brief analysis of design practices in the car industry, we detail how the Failure Modes and Effects Analysis (FMEA) approach is implemented in this sector. We then suggest an adaptation that enables designers to consider real work situations. This new protocol, namely, work situation FMEA, allows experience feedback to be used to defend the health standpoint during designer project reviews, which usually only address quality and performance issues. We subsequently illustrate the advantage of this approach using two examples of work situations at car parts manufacturers: the first from the literature and the second from an in-company industrial project.

Doing Textiles Experiments in Game-Based Virtual Reality: A Design of the Stereoscopic Chemical Laboratory (SCL) for Textiles Education

Science.gov (United States)

Lau, Kung Wong; Kan, Chi Wai; Lee, Pui Yuen

2017-01-01

Purpose: The purpose of this paper is to discuss the use of stereoscopic virtual technology in textile and fashion studies in particular to the area of chemical experiment. The development of a designed virtual platform, called Stereoscopic Chemical Laboratory (SCL), is introduced. Design/methodology/approach: To implement the suggested…

Heavy Sexual Content Versus Safer Sex Content: A Content Analysis of the Entertainment Education Drama Shuga.

Science.gov (United States)

Booker, Nancy Achieng'; Miller, Ann Neville; Ngure, Peter

2016-12-01

Extremely popular with Kenyan youth, the entertainment-education drama Shuga was designed with specific goals of promoting condom use, single versus multiple sexual partners, and destigmatization of HIV. Almost as soon as it aired, however, it generated controversy due to its extensive sexual themes and relatively explicit portrayal of sexual issues. To determine how safer sex, antistigma messages, and overall sexual content were integrated into Shuga, we conducted a content analysis. Results indicated that condom use and HIV destigmatization messages were frequently and clearly communicated. Negative consequences for risky sexual behavior were communicated over the course of the entire series. Messages about multiple concurrent partnerships were not evident. In addition, in terms of scenes per hour of programming, Shuga had 10.3 times the amount of sexual content overall, 8.2 times the amount of sexual talk, 17.8 times the amount of sexual behavior, and 9.4 times the amount of sexual intercourse as found in previous analysis of U.S. entertainment programming. Research is needed to determine how these factors may interact to influence adolescent viewers of entertainment education dramas.

DESIGN, SYNTHESIS, AND APPLICATION OF THE TRIMETHOPRIM-BASED CHEMICAL TAG FOR LIVE CELL IMAGING

Science.gov (United States)

Jing, Chaoran; Cornish, Virginia W.

2013-01-01

Over the past decade chemical tags have been developed to complement the use of fluorescent proteins in live cell imaging. Chemical tags retain the specificity of protein labeling achieved with fluorescent proteins through genetic encoding, but provide smaller, more robust tags and modular use of organic fluorophores with high photon-output and tailored functionalities. The trimethoprim-based chemical tag (TMP-tag) was initially developed based on the high affinity interaction between E.coli dihydrofolatereductase and the antibiotic trimethoprim and subsequently rendered covalent and fluorogenic via proximity-induced protein labeling reactions. To date, the TMP-tag is one of the few chemical tags that enable intracellular protein labeling and high-resolution live cell imaging. Here we describe the general design, chemical synthesis, and application of TMP-tag for live cell imaging. Alternative protocols for synthesizing and using the covalent and the fluorogenic TMP-tags are also included. PMID:23839994

Design of a rotary reactor for chemical-looping combustion. Part 1: Fundamentals and design methodology

KAUST Repository

Zhao, Zhenlong

2014-04-01

Chemical-looping combustion (CLC) is a novel and promising option for several applications including carbon capture (CC), fuel reforming, H 2 generation, etc. Previous studies demonstrated the feasibility of performing CLC in a novel rotary design with micro-channel structures. In the reactor, a solid wheel rotates between the fuel and air streams at the reactor inlet, and depleted air and product streams at exit. The rotary wheel consists of a large number of micro-channels with oxygen carriers (OC) coated on the inner surface of the channel walls. In the CC application, the OC oxidizes the fuel while the channel is in the fuel zone to generate undiluted CO2, and is regenerated while the channel is in the air zone. In this two-part series, the effect of the reactor design parameters is evaluated and its performance with different OCs is compared. In Part 1, the design objectives and criteria are specified and the key parameters controlling the reactor performance are identified. The fundamental effects of the OC characteristics, the design parameters, and the operating conditions are studied. The design procedures are presented on the basis of the relative importance of each parameter, enabling a systematic methodology of selecting the design parameters and the operating conditions with different OCs. Part 2 presents the application of the methodology to the designs with the three commonly used OCs, i.e., nickel, copper, and iron, and compares the simulated performances of the designs. © 2013 Elsevier Ltd. All rights reserved.

Advances in ICF power reactor design

International Nuclear Information System (INIS)

Hogan, W.J.; Kulcinski, G.L.

1985-01-01

Fifteen ICF power reactor design studies published since 1980 are reviewed to illuminate the design trends they represent. There is a clear, continuing trend toward making ICF reactors inherently safer and environmentally benign. Since this trend accentuates inherent advantages of ICF reactors, we expect it to be further emphasized in the future. An emphasis on economic competitiveness appears to be a somewhat newer trend. Lower cost of electricity, smaller initial size (and capital cost), and more affordable development paths are three of the issues being addressed with new studies

Contextual inquiry for medical device design

CERN Document Server

Privitera, Mary Beth

2015-01-01

Contextual Inquiry for Medical Device Design helps users understand the everyday use of medical devices and the way their usage supports the development of better products and increased market acceptance. The text explains the concept of contextual inquiry using real-life examples to illustrate its application. Case studies provide a frame of reference on how contextual inquiry is successfully used during product design, ultimately producing safer, improved medical devices. Presents the ways contextual inquiry can be used to inform the evaluation and business case of technologyHelps users

Does the real-time ultrasound guidance provide safer venipuncture in implantable venous port implantation?

Science.gov (United States)

Yıldırım, İlknur; Tütüncü, Ayşe Çiğdem; Bademler, Süleyman; Özgür, İlker; Demiray, Mukaddes; Karanlık, Hasan

2018-03-01

To examine whether the real-time ultrasound-guided venipuncture for implantable venous port placement is safer than the traditional venipuncture. The study analyzed the results of 2153 venous ports placed consecutively from January 2009 to January 2016. A total of 922 patients in group 1 and 1231 patients in group 2 were admitted with venous port placed using the traditional landmark subclavian approach and real-time ultrasound-guided axillary approach, respectively. Sociodemographic characteristics of patients, early (pneumothorax, pinch-off syndrome, arterial puncture, hematoma, and malposition arrhythmia) and late (deep vein thrombosis, obstruction, infection, erosion-dehiscence, and rotation of the port chamber) complications and the association of these complications with the implantation method were evaluated. There were no significant differences in the sociodemographic characteristics of the patients between the two groups. The overall and early complications in group 2 were significantly lower than those in group 1. Pinch-off syndrome only developed in group 1. Seven patients and two patients had pneumothorax in groups 1 and 2, respectively. Puncture number was significantly associated with the development of the overall complications. The ultrasound-guided axillary approach may be preferred as a method to reduce the risk of both early and late complications. Large, randomized, controlled prospective trials will be helpful in determining a safer implantable venous port implantation technique.

An infrared free-electron laser for the Chemical Dynamics Research Laboratory. Design report

Energy Technology Data Exchange (ETDEWEB)

Vaughan, D. [comp.

1992-04-01

This document describes a free-electron laser (FEL) proposed as part of the Chemical Dynamics Research Laboratory (CDRL), a user facility that also incorporates several advanced lasers of conventional design and two beamlines for the ALS. The FEL itself addresses the needs of the chemical sciences community for a high-brightness, tunable source covering a broad region of the infrared spectrum -- from 3 to 50 {mu}m. All of these sources, together with a variety of sophisticated experimental stations, will be housed in a new building to be located adjacent to the ALS. The radiation sources can be synchronized to permit powerful two-color, pump-probe experiments that will further our fundamental understanding of chemical dynamics at the molecular level, especially those aspects relevant to practical issues in combustion chemistry. The technical approach adopted in this design makes use of superconducting radiofrequency (SCRF) accelerating structures. The primary motivation for adopting this approach was to meet the user requirement for wavelength stability equal to one part in 10{sup 4}. Previous studies concluded that a wavelength stability of only one part in 10{sup 3} could be achieved with currently available room-temperature technology. In addition, the superconducting design operates in a continuous-wave (cw) mode and hence offers considerably higher average optical output power. It also allows for various pulse-gating configurations that will permit simultaneous multiuser operations. A summary of the comparative performance attainable with room-temperature and superconducting designs is given. The FEL described in this report provides a continuous train of 30-ps micropulses, with 100{mu}J of optical energy per micropulse, at a repetition rate of 6.1 MHz. The device can also deliver pulses at a cw repetition rate of 12.2 MHz, with a peak power of 50 {mu}J per micropulse. 70 ref.

An application of safer for the Upper East Fork Poplar Creek characterization area at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

International Nuclear Information System (INIS)

Lutz, C.T.; Provost, C.A.

1996-01-01

The Streamlined Approach for Environmental Restoration (SAFER) has been applied at the US Department of Energy's Y-12 Plant in Oak Ridge, Tennessee. The Y-12 Plant is an operationally and hydrogeologically complex area located within the watershed of Upper East Fork Poplar Creek (UEFPC). The plant has been in operation since 1943 and nearly 175 potentially contaminated sites resulting from past waste management practices have been identified. The need to complete Remedial Investigations (RIs) for the sites in a timely and cost-effective manner has resulted in an approach that considers the entire watershed of UEFPC, which has been designated a open-quotes Characterization Areaclose quotes (CA). This approach emphasizes the watershed rather than individual sites, focuses on key questions and issues, and maximizes the use of existing data. The goal of this approach is to focus work toward the resolution of key questions and decisions necessary to complete the remediation of the CA. An evaluation of the potentially contaminated sites, the development of key questions, and the compilation and analysis of existing data are progressing. A SAFER workshop will be held in 1996, which will allow the project team and stakeholders to discuss the status of the RI, identify additional key questions and issues, and determine the activities necessary to complete the RI. This investigation demonstrates an approach to streamlining the RI process that could be applied successfully to other complex sites

A framework for safer driving in Mauritius

Directory of Open Access Journals (Sweden)

V. Bassoo

2017-12-01

Full Text Available According to the National Transport Authority (NTA, there were 493,081 registered vehicles in Mauritius in April 2016, which represents a 1.4% annual increase compared to 2015. Despite the sensitization campaigns and the series of measures setup by the Minister of Public Infrastructure and Land Transport, the number of road accidents continues to rise. The three main elements that contribute to accidents are: road infrastructure, vehicle and driver. The driver has the highest contribution in collisions. If the driver is given the right information (e.g. driving behaviour, accident-prone areas and vehicle status at the right time, he/she can make better driving decisions and react promptly to critical situations. This paper proposes a framework for safer driving in Mauritius that uses an on-board car diagnostic module (OBDII to collect data such as vehicle average speed, engine revolution and acceleration. This module relays the data to a cloud environment where an adaptive algorithm analyses the data and predicts driver behaviour in real-time. Based on driving behaviour, mobile alerts can be sent to the driver in the form of messages, voice commands or beeps. A survey was also carried out to evaluate the acceptance rate of such a framework by people of different age groups in Mauritius.

'He lacks his fatherhood': safer conception technologies and the biological imperative for fatherhood among recently-diagnosed Xhosa-speaking men living with HIV in South Africa.

Science.gov (United States)

Taylor, Tonya N; Mantell, Joanne E; Nywagi, Ntobeko; Cishe, Nomazizi; Cooper, Diane

2013-01-01

This paper explores notions of fatherhood and their linkages to fertility desires and intentions among a treatment-naïve cohort of Xhosa-speaking male key informants living with HIV, aged 20-53 in Cape Town, South Africa. Analysis is based on an initial 27, and 20 follow-up, interviews with men who were part of a study that assessed the acceptability of safer conception and alternative parenting strategies among men and women newly diagnosed with HIV to inform an intervention. Grounded theory analysis revealed themes related to the cultural imperative of biologically-connected fatherhood. Certain safer-conception strategies aimed at minimising the risk of HIV transmission were perceived as threats to paternity. These findings suggest that understanding of social and cultural beliefs related to notions of paternity and fatherhood may inform the implementation of acceptable safer-conception options for HIV-positive men and their infected and uninfected female partners in a high-HIV prevalence, low-resource setting.

Streamlined Approach for Environmental Restoration (SAFER) Plan for Corrective Action Unit 553: Areas 19, 20 Mud Pits and Cellars, Nevada Test Site, Nevada, Rev. No. 0

International Nuclear Information System (INIS)

Boehlecke, Robert F.

2006-01-01

This Streamlined Approach for Environmental Restoration (SAFER) Plan addresses the actions necessary for the closure of Corrective Action Unit (CAU) 553: Areas 19, 20 Mud Pits and Cellars, Nevada Test Site (NTS), Nevada. It has been developed in accordance with the ''Federal Facility Agreement and Consent Order'' (FFACO) (1996) that was agreed to by the State of Nevada, the U.S. Department of Energy (DOE), and the U.S. Department of Defense. A SAFER may be performed when the following criteria are met: (1) Conceptual corrective actions are clearly identified (although some degree of investigation may be necessary to select a specific corrective action before completion of the Corrective Action Investigation [CAI]); (2) Uncertainty of the nature, extent, and corrective action must be limited to an acceptable level of risk; (3) The SAFER Plan includes decision points and criteria for making data quality objective (DQO) decisions. The purpose of the investigation will be to document and verify the adequacy of existing information; to affirm the decision for clean closure, closure in place, or no further action; and to provide sufficient data to implement the corrective action. The actual corrective action selected will be based on characterization activities implemented under this SAFER Plan. This SAFER Plan identifies decision points developed in cooperation with the Nevada Department of Environmental Protection (NDEP), where the DOE, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) will reach consensus with the NDEP before beginning the next phase of work. Corrective Action Unit 553 is located in Areas 19 and 20 of the NTS, approximately 65 miles (mi) northwest of Las Vegas, Nevada (Figure 1-1). Corrective Action Unit 553 is comprised of the four Corrective Action Sites (CASs) shown on Figure 1-1 and listed below: 19-99-01, Mud Spill; 19-99-11, Mud Spill; 20-09-09, Mud Spill; and 20-99-03, Mud Spill. There is sufficient information and process

Chemical control and design considerations for CANDU-PHW steam generators

International Nuclear Information System (INIS)

Frost, C.R.; Churchill, B.R.

1978-01-01

Ontario Hydro presently operates eight nuclear power units with a total capacitiy of about 4000 MW(e) net. Operating experience has been with Monel-400 and with Inconel-600 tubed steam generators using sodium phosphate or all volatile control of the boiler steam and water system. With a heavy water Heat Transport System, steam generator tube integrity is an essential ingredient of economical power production. Only three steam generator tube failures have occurred so far in about 40 unit-years operation. None was attributable to corrosion. Factors in the good reliability are, careful engineering design, good quality control at all stages of tubing and steam generator manufacture and close chemical control. The continuing evolution of our steam generator design means that future requirements will be more stringent. (author)

Industrial Scale Synthesis of Carbon Nanotubes Via Fluidized Bed Chemical Vapor Deposition: A Senior Design Project

Science.gov (United States)

Smith, York R.; Fuchs, Alan; Meyyappan, M.

2010-01-01

Senior year chemical engineering students designed a process to produce 10 000 tonnes per annum of single wall carbon nanotubes (SWNT) and also conducted bench-top experiments to synthesize SWNTs via fluidized bed chemical vapor deposition techniques. This was an excellent pedagogical experience because it related to the type of real world design…

Designing multifunctional chemical sensors using Ni and Cu doped carbon nanotubes

DEFF Research Database (Denmark)

Mowbray, Duncan; García Lastra, Juan Maria; Thygesen, Kristian Sommer

2010-01-01

We demonstrate a “bottom up” approach to the computational design of a multifunctional chemical sensor. General techniques are employed for describing the adsorption coverage and resistance properties of the sensor based on density functional theory and non-equilibrium Green's function...... methodologies, respectively. Specifically, we show how Ni and Cu doped metallic (6,6) single-walled carbon nanotubes may work as effective multifunctional sensors for both CO and NH3....

An integrated computer aided system for integrated design of chemical processes

DEFF Research Database (Denmark)

Gani, Rafiqul; Hytoft, Glen; Jaksland, Cecilia

1997-01-01

In this paper, an Integrated Computer Aided System (ICAS), which is particularly suitable for solving problems related to integrated design of chemical processes; is presented. ICAS features include a model generator (generation of problem specific models including model simplification and model ...... form the basis for the toolboxes. The available features of ICAS are highlighted through a case study involving the separation of binary azeotropic mixtures. (C) 1997 Elsevier Science Ltd....

Identification of novel target genes for safer and more specific control of root-knot nematodes from a pan-genome mining.

Directory of Open Access Journals (Sweden)

Etienne G J Danchin

2013-10-01

Full Text Available Root-knot nematodes are globally the most aggressive and damaging plant-parasitic nematodes. Chemical nematicides have so far constituted the most efficient control measures against these agricultural pests. Because of their toxicity for the environment and danger for human health, these nematicides have now been banned from use. Consequently, new and more specific control means, safe for the environment and human health, are urgently needed to avoid worldwide proliferation of these devastating plant-parasites. Mining the genomes of root-knot nematodes through an evolutionary and comparative genomics approach, we identified and analyzed 15,952 nematode genes conserved in genomes of plant-damaging species but absent from non target genomes of chordates, plants, annelids, insect pollinators and mollusks. Functional annotation of the corresponding proteins revealed a relative abundance of putative transcription factors in this parasite-specific set compared to whole proteomes of root-knot nematodes. This may point to important and specific regulators of genes involved in parasitism. Because these nematodes are known to secrete effector proteins in planta, essential for parasitism, we searched and identified 993 such effector-like proteins absent from non-target species. Aiming at identifying novel targets for the development of future control methods, we biologically tested the effect of inactivation of the corresponding genes through RNA interference. A total of 15 novel effector-like proteins and one putative transcription factor compatible with the design of siRNAs were present as non-redundant genes and had transcriptional support in the model root-knot nematode Meloidogyne incognita. Infestation assays with siRNA-treated M. incognita on tomato plants showed significant and reproducible reduction of the infestation for 12 of the 16 tested genes compared to control nematodes. These 12 novel genes, showing efficient reduction of parasitism when

Design and Activation of a LOX/GH Chemical Steam Generator

Science.gov (United States)

Saunders, G. P.; Mulkey, C. A.; Taylor, S. A.

2009-01-01

The purpose of this paper is to give a detailed description of the design and activation of the LOX/GH fueled chemical steam generator installed in Cell 2 of the E3 test facility at Stennis Space Center, MS (SSC). The steam generator uses a liquid oxygen oxidizer with gaseous hydrogen fuel. The combustion products are then quenched with water to create steam at pressures from 150 to 450 psig at temperatures from 350 to 750 deg F (from saturation to piping temperature limits).

A Randomised Controlled Trial Using Mobile Advertising to Promote Safer Sex and Sun Safety to Young People

Science.gov (United States)

Gold, J.; Aitken, C. K.; Dixon, H. G.; Lim, M. S. C.; Gouillou, M.; Spelman, T.; Wakefield, M.; Hellard, M. E.

2011-01-01

Mobile phone text messages (SMS) are a promising method of health promotion, but a simple and low cost way to obtain phone numbers is required to reach a wide population. We conducted a randomised controlled trial with simultaneous brief interventions to (i) evaluate effectiveness of messages related to safer sex and sun safety and (ii) pilot the…

78 FR 44560 - Agency Information Collection Activities; Proposed Collection; Comment Request

Science.gov (United States)

2013-07-24

... are required to show photographic identification, pass through a metal detector, and sign the EPA... safer chemicals and other health and environmental considerations into the design of their products and... Supporting Statement, to gauge public awareness and understanding of the logo and its meaning before and...

“He lacks his fatherhood”: Safer conception technologies and the biological imperative for fatherhood among recently-diagnosed Xhosa-speaking men living with HIV in South Africa

Science.gov (United States)

Taylor, Tonya N.; Mantell, Joanne E.; Nywagi, Ntobeko; Cishe, Nomazizi; Cooper, Diane

2013-01-01

This paper explores notions of fatherhood and their linkages to fertility desires and intentions among a treatment-naïve cohort of Xhosa-speaking male key informants living with HIV aged 20-53 in Cape Town, South Africa. Analysis is based on an initial 27 and 20 follow up interviews with men who were part of a study that assessed the acceptability of safer conception and alternative parenting strategies among men and women newly diagnosed with HIV to inform an intervention. Grounded theory analysis revealed themes related to the cultural imperative of biologically-connected fatherhood. Certain safer conception strategies aimed at minimising the risk of HIV transmission were perceived as threats to paternity. These findings suggest that understanding of social and cultural beliefs related to notions of paternity and fatherhood may inform the implementation of acceptable safer conception options for HIV-positive men and their infected and uninfected female partners in a high HIV prevalence, low-resource setting. PMID:23862770

Streamlined Approach for Environmental Restoration (SAFER) Plan for Corrective Action Unit 539: Area 25 and Area 26 Railroad Tracks, Nevada Test Site, Nevada, Revision 0

Energy Technology Data Exchange (ETDEWEB)

Mark Krauss

2010-06-01

, LLC. The DQO process has been used to identify and define the type, amount, and quality of data needed to determine and implement appropriate corrective actions for each Railroad Tracks CAS in CAU 539. The following text summarizes the SAFER activities that will support the closure of CAU 539: • Perform site preparation activities (e.g., utilities clearances, radiological surveys). • Collect in situ dose measurements. • Collect environmental samples from designated target populations (e.g., lead bricks) to confirm or disprove the presence of contaminants of concern (COCs) as necessary to supplement existing information. • If no COCs are present at a CAS, establish no further action as the corrective action. • If COCs exist, collect environmental samples from designated target populations (e.g., clean soil adjacent to contaminated soil) and submit for laboratory analyses to define the extent of COC contamination. If a COC is present at a CAS, NNES will consult NDEP to determine the path forward, then either: • Establish clean closure as the corrective action. The material to be remediated will be removed, disposed of as waste, and verification samples will be collected from remaining soil, or • Establish closure in place as the corrective action and implement the appropriate use restrictions.

Piroxicam-β-cyclodextrin: a GI safer piroxicam.

Science.gov (United States)

Scarpignato, C

2013-01-01

Although NSAIDs are very effective drugs, their use is associated with a broad spectrum of adverse reactions in the liver, kidney, cardiovascular (CV) system, skin and gut. Gastrointestinal (GI) side effects are the most common and constitute a wide clinical spectrum ranging from dyspepsia, heartburn and abdominal discomfort to more serious events such as peptic ulcer with life-threatening complications of bleeding and perforation. The appreciation that CV risk is also increased further complicates the choices of physicians prescribing anti-inflammatory therapy. Despite prevention strategies should be implemented in patients at risk, gastroprotection is often underused and adherence to treatment is generally poor. A more appealing approach would be therefore to develop drugs that are devoid of or have reduced GI toxicity. Gastro- duodenal mucosa possesses many defensive mechanisms and NSAIDs have a deleterious effect on most of them. This results in a mucosa less able to cope with even a reduced acid load. NSAIDs cause gastro-duodenal damage, by two main mechanisms: a physiochemical disruption of the gastric mucosal barrier and systemic inhibition of gastric mucosal protection, through inhibition of cyclooxygenase (COX, PG endoperoxide G/H synthase) activity of the GI mucosa. However, against a background of COX inhibition by anti-inflammatory doses of NSAIDs, their physicochemical properties, in particular their acidity, underlie the topical effect leading to short-term damage. It has been shown that esterification of acidic NSAIDs suppresses their gastrotoxicity without adversely affecting anti-inflammatory activity. Another way to develop NSAIDs with better GI tolerability is to complex these molecules with cyclodextrins (CDs), giving rise to so-called "inclusion complexes" that can have physical, chemical and biological properties very different from either those of the drug or the cyclodextrin. Complexation of NSAIDs with β-cyclodextrin potentially leads to a

Design, manufacturing and commissioning of mobile unit for EDF (Dow Chemical process)

International Nuclear Information System (INIS)

Cangini, D.; Cordier, J.P.; PEC Engineering, Osny, France)

1985-01-01

To process their spent ion exchange resins and the liquid wastes, EDF has ordered from PEC a mobile unit using the DOW CHEMICAL binder. This paper presents the EDF's design requirements as well as the new French regulation for waste embedding. The mobile unit was started in January 1983 and commissioned successfully in January 1985 in the TRICASTIN EDF's power plant

Chemical engineering design of CO oxidation catalysts

Science.gov (United States)

Herz, Richard K.

1987-01-01

How a chemical reaction engineer would approach the challenge of designing a CO oxidation catalyst for pulsed CO2 lasers is described. CO oxidation catalysts have a long history of application, of course, so it is instructive to first consider the special requirements of the laser application and then to compare them to the characteristics of existing processes which utilize CO oxidation catalysts. All CO2 laser applications require a CO oxidation catalyst with the following characteristics: (1) active at stoichiometric ratios of O2 and CO, (2) no inhibition by CO2 or other components of the laser environment, (3) releases no particulates during vibration or thermal cycling, and (4) long lifetime with a stable activity. In all applications, low consumption of power is desirable, a characteristic especially critical in aerospace applications and, thus, catalyst activity at low temperatures is highly desirable. High power lasers with high pulse repetition rates inherently require circulation of the gas mixture and this forced circulation is available for moving gas past the catalyst. Low repetition rate lasers, however, do not inherently require gas circulation, so a catalyst that did not require such circulation would be favorable from the standpoint of minimum power consumption. Lasers designed for atmospheric penetration of their infrared radiation utilize CO2 formed from rare isotopes of oxygen and this application has the additional constraint that normal abundance oxygen isotopes in the catalyst must not exchange with rare isotopes in the gas mixture.

Chemical laser exhaust pipe design research

Science.gov (United States)

Sun, Yunqiang; Huang, Zhilong; Chen, Zhiqiang; Ren, Zebin; Guo, Longde

2016-10-01

In order to weaken the chemical laser exhaust gas influence of the optical transmission, a vent pipe is advised to emissions gas to the outside of the optical transmission area. Based on a variety of exhaust pipe design, a flow field characteristic of the pipe is carried out by numerical simulation and analysis in detail. The research results show that for uniform deflating exhaust pipe, although the pipeline structure is cyclical and convenient for engineering implementation, but there is a phenomenon of air reflows at the pipeline entrance slit which can be deduced from the numerical simulation results. So, this type of pipeline structure does not guarantee seal. For the design scheme of putting the pipeline contract part at the end of the exhaust pipe, or using the method of local area or tail contraction, numerical simulation results show that backflow phenomenon still exists at the pipeline entrance slit. Preliminary analysis indicates that the contraction of pipe would result in higher static pressure near the wall for the low speed flow field, so as to produce counter pressure gradient at the entrance slit. In order to eliminate backflow phenomenon at the pipe entrance slit, concerned with the pipeline type of radial size increase gradually along the flow, flow field property in the pipe is analyzed in detail by numerical simulation methods. Numerical simulation results indicate that there is not reflow phenomenon at entrance slit of the dilated duct. However the cold air inhaled in the slit which makes the temperature of the channel wall is lower than the center temperature. Therefore, this kind of pipeline structure can not only prevent the leak of the gas, but also reduce the wall temperature. In addition, compared with the straight pipe connection way, dilated pipe structure also has periodic structure, which can facilitate system integration installation.

The global health law trilogy: towards a safer, healthier, and fairer world.

Science.gov (United States)

Gostin, Lawrence O; DeBartolo, Mary Clare; Katz, Rebecca

2017-10-21

Global health advocates often turn to medicine and science for solutions to enduring health risks, but law is also a powerful tool. No state acting alone can ward off health threats that span borders, requiring international solutions. A trilogy of global health law-the Framework Convention on Tobacco Control, International Health Regulations (2005), and Pandemic Influenza Preparedness Framework-strives for a safer, healthier, and fairer world. Yet, these international agreements are not well understood, and contain gaps in scope and enforceability. Moreover, major health concerns remain largely unregulated at the international level, such as non-communicable diseases, mental health, and injuries. Here, we offer reforms for this global health law trilogy. Copyright © 2017 Elsevier Ltd. All rights reserved.

Goneis.gr: Training Greek Parents on ICT and Safer Internet

Science.gov (United States)

Manouselis, Nikos; Riviou, Katerina; Palavitsinis, Nikos; Giannikopoulou, Vasiliki; Tsanakas, Panayotis

Children's use of the Internet has significantly risen in the last decade. Nevertheless, children spend a lot of time online which makes them susceptible to various threats (such as inappropriate material, offensive language, etc). Parents are the last frontier to this menace but they also need to be educated and trained in order to protect their children. Goneis.gr is an initiative launched by the Greek government that aims to educate parents on safer Internet and the use of parental control software. Parents are also entitled to distance learning courses covering basic computer skills. This paper presents the results of two separate surveys that took place in the last few months (December 2008-January 2009). The first survey targeted the parents that have completed the programme and the second one the educational providers that participate in the programme and offer the training to the beneficiaries.

A Combined Heuristic and Indicator-based Methodology for Design of Sustainable Chemical Process Plants

DEFF Research Database (Denmark)

Halim, Iskandar; Carvalho, Ana; Srinivasan, Rajagopalan

2011-01-01

The current emphasis on sustainable production has prompted chemical plants to minimize raw material and energy usage without compromising on economics. While computer tools are available to assistin sustainability assessment, their applications are constrained to a specific domain of the design...

Coupled sensor/platform control design for low-level chemical detection with position-adaptive micro-UAVs

Science.gov (United States)

Goodwin, Thomas; Carr, Ryan; Mitra, Atindra K.; Selmic, Rastko R.

2009-05-01

We discuss the development of Position-Adaptive Sensors [1] for purposes for detecting embedded chemical substances in challenging environments. This concept is a generalization of patented Position-Adaptive Radar Concepts developed at AFRL for challenging conditions such as urban environments. For purposes of investigating the detection of chemical substances using multiple MAV (Micro-UAV) platforms, we have designed and implemented an experimental testbed with sample structures such as wooden carts that contain controlled leakage points. Under this general concept, some of the members of a MAV swarm can serve as external position-adaptive "transmitters" by blowing air over the cart and some of the members of a MAV swarm can serve as external position-adaptive "receivers" that are equipped with chemical or biological (chem/bio) sensors that function as "electronic noses". The objective can be defined as improving the particle count of chem/bio concentrations that impinge on a MAV-based position-adaptive sensor that surrounds a chemical repository, such as a cart, via the development of intelligent position-adaptive control algorithms. The overall effect is to improve the detection and false-alarm statistics of the overall system. Within the major sections of this paper, we discuss a number of different aspects of developing our initial MAV-Based Sensor Testbed. This testbed includes blowers to simulate position-adaptive excitations and a MAV from Draganfly Innovations Inc. with stable design modifications to accommodate our chem/bio sensor boom design. We include details with respect to several critical phases of the development effort including development of the wireless sensor network and experimental apparatus, development of the stable sensor boom for the MAV, integration of chem/bio sensors and sensor node onto the MAV and boom, development of position-adaptive control algorithms and initial tests at IDCAST (Institute for the Development and

Model Reduction in Chemical Engineering : Case studies applied to process analysis, design and operation

NARCIS (Netherlands)

Dorneanu, B.

2011-01-01

During the last decades, models have become widely used for supporting a broad range of chemical engineering activities, such as product and process design and development, process monitoring and control, real time optimization of plant operation or supply chain management. Although tremendous

Chemical analysis of sewage sludge of southern sewerage treatment plant (SSTP) Hyderabad for achieving sustainable development in sector of agriculture

International Nuclear Information System (INIS)

Qureshi, K.; Shaikh, N.; Ahmed, R.S.; Nawaz, Z.

2003-01-01

A study on the chemical analysis of sewage sludge of southern sewerage treatment plant (SSPP) Hyderabad was studied. Chemical analysis on sludge samples collected form the waste stabilization for different micro-nutrients (essential manures, nitrogen, phosphorus, potassium, calcium and magnesium) were conducted in year 1999-2000. These nutrients and metal were detected by reliable analytical method i.e. Kjeldahls method and Atomic Absorption Spectrophotometer. The analysis showed that sewage sludge contained sufficient quantity of primary and secondary nutrients, hence sewage sludge could be utilized as a natural fertilizer. This will not only solve the disposal problem but it would also be environmentally safer way of providing regulators to the plants. (author)

Perspectives of healthcare providers and HIV-affected individuals and couples during the development of a Safer Conception Counseling Toolkit in Kenya: stigma, fears, and recommendations for the delivery of services.

Science.gov (United States)

Mmeje, Okeoma; Njoroge, Betty; Akama, Eliud; Leddy, Anna; Breitnauer, Brooke; Darbes, Lynae; Brown, Joelle

2016-01-01

Reproduction is important to many HIV-affected individuals and couples and healthcare providers (HCPs) are responsible for providing resources to help them safely conceive while minimizing the risk of sexual and perinatal HIV transmission. In order to fulfill their reproductive goals, HIV-affected individuals and their partners need access to information regarding safer methods of conception. The objective of this qualitative study was to develop a Safer Conception Counseling Toolkit that can be used to train HCPs and counsel HIV-affected individuals and couples in HIV care and treatment clinics in Kenya. We conducted a two-phased qualitative study among HCPs and HIV-affected individuals and couples from eight HIV care and treatment sites in Kisumu, Kenya. We conducted in-depth interviews (IDIs) and focus group discussions (FGDs) to assess the perspectives of HCPs and HIV-affected individuals and couples in order to develop and refine the content of the Toolkit. Subsequently, IDIs were conducted among HCPs who were trained using the Toolkit and FGDs among HIV-affected individuals and couples who were counseled with the Toolkit. HIV-related stigma, fears, and recommendations for delivery of safer conception counseling were assessed during the discussions. One hundred and six individuals participated in FGDs and IDIs; 29 HCPs, 49 HIV-affected women and men, and 14 HIV-serodiscordant couples. Participants indicated that a safer conception counseling and training program for HCPs is needed and that routine provision of safer conception counseling may promote maternal and child health by enhancing reproductive autonomy among HIV-affected couples. They also reported that the Toolkit may help dispel the stigma and fears associated with reproduction in HIV-affected couples, while supporting them in achieving their reproductive goals. Additional research is needed to evaluate the Safer Conception Toolkit in order to support its implementation and use in HIV care and

Designing continuous safety improvement within chemical industrial areas

NARCIS (Netherlands)

Reniers, G.L.L.; Ale, B. J.M.; Dullaert, W.; Soudan, K.

This article provides support in organizing and implementing novel concepts for enhancing safety on a cluster level of chemical plants. The paper elaborates the requirements for integrating Safety Management Systems of chemical plants situated within a so-called chemical cluster. Recommendations of

The U.S. experience in promoting sustainable chemistry.

Science.gov (United States)

Tickner, Joel A; Geiser, Ken; Coffin, Melissa

2005-01-01

Recent developments in European chemicals policy, including the Registration, Evaluation and Authorization of Chemicals (REACH) proposal, provide a unique opportunity to examine the U.S. experience in promoting sustainable chemistry as well as the strengths and weaknesses of existing policies. Indeed, the problems of industrial chemicals and limitations in current regulatory approaches to address chemical risks are strikingly similar on both sides of the Atlantic. We provide an overview of the U.S. regulatory system for chemicals management and its relationship to efforts promoting sustainable chemistry. We examine federal and state initiatives and examine lessons learned from this system that can be applied to developing more integrated, sustainable approaches to chemicals management. There is truly no one U.S. chemicals policy, but rather a series of different un-integrated policies at the federal, regional, state and local levels. While centerpiece U.S. Chemicals Policy, the Toxic Substances Control Act of 1976, has resulted in the development of a comprehensive, efficient rapid screening process for new chemicals, agency action to manage existing chemicals has been very limited. The agency, however, has engaged in a number of successful, though highly underfunded, voluntary data collection, pollution prevention, and sustainable design programs that have been important motivators for sustainable chemistry. Policy innovation in the establishment of numerous state level initiatives on persistent and bioaccumulative toxics, chemical restrictions and toxics use reduction have resulted in pressure on the federal government to augment its efforts. It is clear that data collection on chemical risks and phase-outs of the most egregious chemicals alone will not achieve the goals of sustainable chemistry. These alone will also not internalize the cultural and institutional changes needed to ensure that design and implementation of safer chemicals, processes, and products

CPTED 101: Crime Prevention through Environmental Design--The Fundamentals for Schools

Science.gov (United States)

Schneider, Tod

2010-01-01

Crime Prevention through Environmental Design (CPTED) 101 applies to both new and existing schools and is built on three simple concepts: natural surveillance, natural access control, and territoriality. If a school's layout seems unsafe, adopting a few CPTED fundamentals may help make it significantly safer. This paper offers some tips for making…

A Pilot Intervention to Promote Safer Sex in Heterosexual Puerto Rican Couples.

Science.gov (United States)

Pérez-Jiménez, David; Seal, David Wyatt; Ronis, David L

2014-09-01

Although the sexual transmission of HIV occurs in the context of an intimate relationship, preventive interventions with couples are scarce, particularly those designed for Hispanics. In this article, we present the effect of a pilot intervention directed to prevent HIV/AIDS in heterosexual couples in Puerto Rico. The intervention was theory-based and consisted of five three-hour group sessions. Primary goals included increasing male condom use and the practice of mutual masturbation as a safer sex method, and promoting favorable attitudes toward these behaviors. Twenty-six couples participated in this study. Fifteen were randomly assigned to the intervention group and eleven to a control group. Retention rates at post-intervention and follow-up were 82% for the whole sample. Results showed that there was a significant increase in the use of male condoms with main partners in the intervention group when compared with the control group. Couples in the intervention group also had better scores on secondary outcomes, such as attitudes toward condom use and mutual masturbation, HIV information, sexual decision-making, and social support. We found that these effects persisted over the three month follow up. A significant effect was also observed for the practice of mutual masturbation, but not for sexual negotiation. These results showed that promoting male condom use in dyadic interventions among heterosexual couples in Puerto Rico is feasible. Our findings suggest that because vaginal penetration has been constructed as the sexual script endpoint among many Hispanic couples, promoting other non-penetrative practices, such as mutual masturbation, may be difficult.

A multimedia exposure assessment methodology for evaluating the performance of the design of structures containing chemical and radioactive wastes

International Nuclear Information System (INIS)

Stephanatos, B.N.; Molholt, B.; Walter, K.P.; MacGregor, A.

1991-01-01

The objectives of this work are to develop a multimedia exposure assessment methodology for the evaluation of existing and future design of structures containing chemical and radioactive wastes and to identify critical parameters for design optimization. The designs are evaluated in terms of their compliance with various federal and state regulatory requirements. Evaluation of the performance of a particular design is presented within the scope of a given exposure pathway. An exposure pathway has four key components: (1) a source and mechanism of chemical release, (2) a transport medium; (3) a point of exposure; and (4) a route of exposure. The first step in the analysis is the characterization of the waste source behavior. The rate and concentration of releases from the source are evaluated using appropriate mathematical models. The migration of radionuclides and chemicals is simulated through each environmental medium to the exposure point. The total exposure to the potential receptor is calculated, and an estimate of the health effects of the exposure is made. Simulation of the movement of radionuclides and chemical wastes from the source to the receptor point includes several processes. If the predicted human exposure to contaminants meets the performance criteria, the design has been validated. Otherwise the structure design is improved to meet the performance criteria. A phased modeling approach is recommended at a particular mixed waste site. A relatively simple model is initially used to pinpoint critical fate and transport processes and design parameters. The second phase of the modeling effort involves the use of more complex and resource intensive fate and transport models. This final step in the modeling process provides more accurate estimates of contaminant concentrations at the point of exposure. Thus the human dose is more accurately predicted, providing better design validation

“I don’t know if this is right…but this is what I’m offering”: Healthcare provider knowledge, practice, and attitudes towards safer conception for HIV-affected couples in the context of Southern African guidelines

Science.gov (United States)

Schwartz, Sheree; Phofa, Rebecca; Yende, Nompumelelo; Bassett, Jean; Sanne, Ian; Van Rie, Annelies

2016-01-01

The 2011 guidelines for safer conception for HIV-affected individuals and couples were adopted by the South African Department of Health in December 2012. We assessed implementation gaps and facilitators and barriers to delivering safer conception services through examining patient and healthcare provider (HCP) experiences. At Witkoppen Health and Welfare Centre, a primary care clinic in Johannesburg, we conducted in-depth interviews (IDIs) with 9 HCPs (doctors, nurses and counselors) and IDIs and focus group discussions with 42 HIV-affected men and women interested in having a child. Data were analyzed using a grounded theory approach. HCPs were supportive of fertility intentions of HIV-affected couples and demonstrated some knowledge of safer conception methods, especially ART initiation to suppress viral load in infected partners. Unfortunately, HCPs did not follow the key recommendation that HCPs initiate conversations on fertility intentions with HIV-affected men and women. Providers and clients reported that conversations about conception only occur when client-initiated, placing the onus on HIV-affected individuals. Important barriers underlying this were the misconception held by some HCPs that uninfected partners in serodiscordant partnerships are “latently” infected and the desire by most HCPs to protect or control knowledge around fertility and safer conception methods out of concern over what clients will do with this knowledge before they are virally suppressed or ready to conceive. Almost all participants who had conceived or attempted conception did so without safer conception methods knowledge. HCP concern over conception readiness, perception of what clients will do with safer conception knowledge, and gaps in safer conception knowledge prevent HCPs from initiating conversations with HIV-affected patients on the issue of childbearing. Examining these findings in the context of existing South African guidelines illuminates areas that need to be

Slurry pipeline design approach

Energy Technology Data Exchange (ETDEWEB)

Betinol, Roy; Navarro R, Luis [Brass Chile S.A., Santiago (Chile)

2009-12-19

Compared to other engineering technologies, the design of a commercial long distance Slurry Pipeline design is a relatively new engineering concept which gained more recognition in the mid 1960 's. Slurry pipeline was first introduced to reduce cost in transporting coal to power generating units. Since then this technology has caught-up worldwide to transport other minerals such as limestone, copper, zinc and iron. In South America, the use of pipeline is commonly practiced in the transport of Copper (Chile, Peru and Argentina), Iron (Chile and Brazil), Zinc (Peru) and Bauxite (Brazil). As more mining operations expand and new mine facilities are opened, the design of the long distance slurry pipeline will continuously present a commercially viable option. The intent of this paper is to present the design process and discuss any new techniques and approach used today to ensure a better, safer and economical slurry pipeline. (author)

Procafd: Computer Aided Tool for Synthesis-Design & Analysis of Chemical Process Flowsheets

DEFF Research Database (Denmark)

Kumar Tula, Anjan; Eden, Mario R.; Gani, Rafiqul

2015-01-01

and emission to the surrounding and many more. In terms of approaches to solve the synthesis-design problem three major lines of attack have emerged: (a) the knowledge based approach [1] which relies on engineering knowledge & problem insights, (b) the optimization approach [2] which relies on the use...... of mathematical programming techniques, (c) hybrid approach which combine two or more approaches. D’Anterroches [3] proposed a group contribution based hybrid approach to solve the synthesis-design problem where, chemical process flowsheets could be synthesized in the same way as atoms or groups of atoms...... parameters for the operations of the high ranked flowsheets are established through reverse engineering approaches based on driving forces available for each operation. In the final stage, rigorous simulation is performed to validate the synthesis-design. Note that since the flowsheet is synthesized...

Safer sex decision-making among men with haemophilia and HIV and their female partners.

Science.gov (United States)

Parish, K L; Cotton, D; Huszti, H C; Parsons, J T

2001-01-01

An exploratory qualitative study of adult heterosexual men with haemophilia and HIV and women who were their sexual partners was conducted as formative research to better understand cognitive factors involved in behavioural intentions and practices which comprise HIV risk-reduction for sexual transmission. The study sought to generate hypotheses, uncover themes, and develop a broad perspective on possible determinants of behaviours related to HIV transmission risk reduction. Qualitative analysis of these data served as a basis for developing a subsequent quantitative, hypothesis-testing survey and an intervention. Face-to-face interviews were conducted with 23 single men and 28 married men with haemophilia and HIV infection, and 28 married women partners selected through stratified, purposeful sampling. The interviews identified beliefs, attitudes, and values underlying decisions regarding target behaviours related to preventing sexual transmission of HIV, including (1) using condoms consistently during vaginal intercourse and (2) talking to partners about risk reduction. The interviews elicited information about perceived advantages and disadvantages of performing each of the targeted behaviours, and factors that facilitate or prevent performing them. Qualitative analysis of coded responses yielded important themes regarding how choices are made about sexual activity and safer sex. Most notably, communication between partners (1) plays a direct, key role in facilitating condom use and (2) forms the basis for maintaining emotional intimacy in these relationships. The link between condom use and communicating about safer sex was viewed as pivotal in achieving HIV prevention for individuals in serodiscordant couples. Recommendations for risk reduction intervention development are discussed.

The Polymeal: a more natural, safer, and probably tastier (than the Polypill) strategy to reduce cardiovascular disease by more than 75%

NARCIS (Netherlands)

O.H. Franco (Oscar); L.G.A. Bonneux (Luc); C.E.D. de Laet (Chris); A. Peeters (Anna); E.W. Steyerberg (Ewout); J.P. Mackenbach (Johan)

2004-01-01

textabstractOBJECTIVE: Although the Polypill concept (proposed in 2003) is promising in terms of benefits for cardiovascular risk management, the potential costs and adverse effects are its main pitfalls. The objective of this study was to identify a tastier and safer

Design Tool for Estimating Chemical Hydrogen Storage System Characteristics for Light-Duty Fuel Cell Vehicles

Energy Technology Data Exchange (ETDEWEB)

Brooks, Kriston P.; Sprik, Sam; Tamburello, David; Thornton, Matthew

2018-05-03

The U.S. Department of Energy (DOE) has developed a vehicle framework model to simulate fuel cell-based light-duty vehicle operation for various hydrogen storage systems. This transient model simulates the performance of the storage system, fuel cell, and vehicle for comparison to DOE’s Technical Targets using four drive cycles/profiles. Chemical hydrogen storage models have been developed for the Framework model for both exothermic and endothermic materials. Despite the utility of such models, they require that material researchers input system design specifications that cannot be easily estimated. To address this challenge, a design tool has been developed that allows researchers to directly enter kinetic and thermodynamic chemical hydrogen storage material properties into a simple sizing module that then estimates the systems parameters required to run the storage system model. Additionally, this design tool can be used as a standalone executable file to estimate the storage system mass and volume outside of the framework model and compare it to the DOE Technical Targets. These models will be explained and exercised with existing hydrogen storage materials.

Design Tool for Estimating Chemical Hydrogen Storage System Characteristics for Light-Duty Fuel Cell Vehicles

Energy Technology Data Exchange (ETDEWEB)

Thornton, Matthew J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sprik, Samuel [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brooks, Kriston P. [Pacific Northwest National Laboratory; Tamburello, David A. [Savannah River National Laboratory

2018-04-07

The U.S. Department of Energy (DOE) developed a vehicle Framework model to simulate fuel cell-based light-duty vehicle operation for various hydrogen storage systems. This transient model simulates the performance of the storage system, fuel cell, and vehicle for comparison to Technical Targets established by DOE for four drive cycles/profiles. Chemical hydrogen storage models have been developed for the Framework for both exothermic and endothermic materials. Despite the utility of such models, they require that material researchers input system design specifications that cannot be estimated easily. To address this challenge, a design tool has been developed that allows researchers to directly enter kinetic and thermodynamic chemical hydrogen storage material properties into a simple sizing module that then estimates system parameters required to run the storage system model. Additionally, the design tool can be used as a standalone executable file to estimate the storage system mass and volume outside of the Framework model. These models will be explained and exercised with the representative hydrogen storage materials exothermic ammonia borane (NH3BH3) and endothermic alane (AlH3).

Designation of Alpha-Phenylacetoacetonitrile (APAAN), a Precursor Chemical Used in the Illicit Manufacture of Phenylacetone, Methamphetamine, and Amphetamine, as a List I Chemical. Final rule.

Science.gov (United States)

2017-07-14

The Drug Enforcement Administration (DEA) is finalizing the designation of the chemical alpha-phenylacetoacetonitrile (APAAN) and its salts, optical isomers, and salts of optical isomers, as a list I chemical under the Controlled Substances Act (CSA). The DEA proposed control of APAAN, due to its use in clandestine laboratories to illicitly manufacture the schedule II controlled substances phenylacetone (also known as phenyl-2-propanone or P2P), methamphetamine, and amphetamine. This rulemaking finalizes, without change, the control of APAAN as a list I chemical. This action does not establish a threshold for domestic and international transactions of APAAN. As such, all transactions involving APAAN, regardless of size, shall be regulated. In addition, chemical mixtures containing APAAN are not exempt from regulatory requirements at any concentration. Therefore, all transactions of chemical mixtures containing any quantity of APAAN shall be regulated pursuant to the CSA. However, manufacturers may submit an application for exemption for those mixtures that do not qualify for automatic exemption.

Design Evolution and Verification of the A-3 Chemical Steam Generator

Science.gov (United States)

Kirchner, Casey K.

2009-01-01

Following is an overview of the Chemical Steam Generator system selected to provide vacuum conditions for a new altitude test facility, the A-3 Test Stand at Stennis Space Center (SSC) in Bay St. Louis, MS. A-3 will serve as NASA s primary facility for altitude testing of the J-2X rocket engine, to be used as the primary propulsion device for the upper stages of the Ares launch vehicles. The Chemical Steam Generators (CSGs) will produce vacuum conditions in the test cell through the production and subsequent supersonic ejection of steam into a diffuser downstream of the J-2X engine nozzle exit. The Chemical Steam Generators chosen have a rich heritage of operation at rocket engine altitude test facilities since the days of the Apollo program and are still in use at NASA White Sands Test Facility (WSTF) in New Mexico. The generators at WSTF have been modified to a degree, but are still very close to the heritage design. The intent for the A-3 implementation is to maintain this heritage design as much as possible, making minimal updates only where necessary to substitute for obsolete parts and to increase reliability. Reliability improvements are especially desired because the proposed system will require 27 generators, which is nine times the largest system installed in the 1960s. Improvements were suggested by the original design firm, Reaction Motors, by NASA SSC and NASA WSTF engineers, and by the A-3 test stand design contractor, Jacobs Technology, Inc. (JTI). This paper describes the range of improvements made to the design to date, starting with the heritage generator and the minor modifications made over time at WSTF, to the modernized configuration which will be used at A-3. The paper will discuss NASA s investment in modifications to SSC s E-2 test facility fire a full-scale Chemical Steam Generator in advance of the larger steam system installation at A-3. Risk mitigation testing will be performed in early 2009 at this test facility to verify that the CSGs

Multi-level Correlates of Safer Conception Methods Awareness and Attitudes Among Ugandan HIV Clients with Fertility Intentions

OpenAIRE

Wagner, Glenn J.; Woldetsadik, Mahlet A.; Beyeza-Kashesya, Jolly; Goggin, Kathy; Mindry, Deborah; Finocchario-Kessler, Sarah; Khanakwa, Sarah; Wanyenze, Rhoda K.

2016-01-01

Many people living with HIV desire childbearing, but low cost safer conception methods (SCM) such as timed unprotected intercourse (TUI) and manual self-insemination (MSI) are rarely used. We examined awareness and attitudes towards SCM, and the correlates of these constructs among 400 HIV clients with fertility intentions in Uganda. Measures included awareness, self-efficacy, and motivation regarding SCM, as well as demographics, health management, partner and provider characteristics. Just ...

The Use of Chemical-Chemical Interaction and Chemical Structure to Identify New Candidate Chemicals Related to Lung Cancer.

Directory of Open Access Journals (Sweden)

Lei Chen

Full Text Available Lung cancer causes over one million deaths every year worldwide. However, prevention and treatment methods for this serious disease are limited. The identification of new chemicals related to lung cancer may aid in disease prevention and the design of more effective treatments. This study employed a weighted network, constructed using chemical-chemical interaction information, to identify new chemicals related to two types of lung cancer: non-small lung cancer and small-cell lung cancer. Then, a randomization test as well as chemical-chemical interaction and chemical structure information were utilized to make further selections. A final analysis of these new chemicals in the context of the current literature indicates that several chemicals are strongly linked to lung cancer.

Does my step look big in this? A visual illusion leads to safer stepping behaviour.

Directory of Open Access Journals (Sweden)

David B Elliott

Full Text Available BACKGROUND: Tripping is a common factor in falls and a typical safety strategy to avoid tripping on steps or stairs is to increase foot clearance over the step edge. In the present study we asked whether the perceived height of a step could be increased using a visual illusion and whether this would lead to the adoption of a safer stepping strategy, in terms of greater foot clearance over the step edge. The study also addressed the controversial question of whether motor actions are dissociated from visual perception. METHODOLOGY/PRINCIPAL FINDINGS: 21 young, healthy subjects perceived the step to be higher in a configuration of the horizontal-vertical illusion compared to a reverse configuration (p = 0.01. During a simple stepping task, maximum toe elevation changed by an amount corresponding to the size of the visual illusion (p<0.001. Linear regression analyses showed highly significant associations between perceived step height and maximum toe elevation for all conditions. CONCLUSIONS/SIGNIFICANCE: The perceived height of a step can be manipulated using a simple visual illusion, leading to the adoption of a safer stepping strategy in terms of greater foot clearance over a step edge. In addition, the strong link found between perception of a visual illusion and visuomotor action provides additional support to the view that the original, controversial proposal by Goodale and Milner (1992 of two separate and distinct visual streams for perception and visuomotor action should be re-evaluated.

EOS MLS Lessons Learned: Design Ideas for Safer and Lower Cost Operations

Science.gov (United States)

Miller, Dominick

2012-01-01

The Earth Observing System (EOS) Microwave Limb Sounder (MLS) is a complex instrument with a front end computer and 32 subsystem computers. MLS is one of four instruments on NASA's EOS Aura spacecraft With almost 8 years in orbit, MLS has a few lessons learned which can be applied during the design phase of future instruments to effect better longevity, more robust operations and a significant cost benefit during operations phase.

"I don't know if this is right … but this is what I'm offering": healthcare provider knowledge, practice, and attitudes towards safer conception for HIV-affected couples in the context of Southern African guidelines.

Science.gov (United States)

West, Nora; Schwartz, Sheree; Phofa, Rebecca; Yende, Nompumelelo; Bassett, Jean; Sanne, Ian; Van Rie, Annelies

2016-01-01

The 2011 guidelines for safer conception for HIV-affected individuals and couples were adopted by the South African Department of Health in December 2012. We assessed implementation gaps and facilitators and barriers to delivering safer conception services through examining patient and healthcare provider (HCP) experiences. At Witkoppen Health and Welfare Centre, a primary care clinic in Johannesburg, we conducted in-depth interviews (IDIs) with nine HCPs (doctors, nurses, and counselors) and IDIs and focus group discussions with 42 HIV-affected men and women interested in having a child. Data were analyzed using a grounded theory approach. HCPs were supportive of fertility intentions of HIV-affected couples and demonstrated some knowledge of safer conception methods, especially ART initiation to suppress viral load in infected partners. Unfortunately, HCPs did not follow the key recommendation that HCPs initiate conversations on fertility intentions with HIV-affected men and women. Providers and clients reported that conversations about conception only occur when client-initiated, placing the onus on HIV-affected individuals. Important barriers underlying this were the misconception held by some HCPs that uninfected partners in serodiscordant partnerships are "latently" infected and the desire by most HCPs to protect or control knowledge around fertility and safer conception methods out of concern over what clients will do with this knowledge before they are virally suppressed or ready to conceive. Almost all participants who had conceived or attempted conception did so without safer conception methods knowledge. HCP concern over conception readiness, perception of what clients will do with safer conception knowledge, and gaps in safer conception knowledge prevent HCPs from initiating conversations with HIV-affected patients on the issue of childbearing. Examining these findings in the context of existing South African guidelines illuminates areas that need to be

Designing Second Generation Anti-Alzheimer Compounds as Inhibitors of Human Acetylcholinesterase: Computational Screening of Synthetic Molecules and Dietary Phytochemicals.

Directory of Open Access Journals (Sweden)

Hafsa Amat-Ur-Rasool

Full Text Available Alzheimer's disease (AD, a big cause of memory loss, is a progressive neurodegenerative disorder. The disease leads to irreversible loss of neurons that result in reduced level of acetylcholine neurotransmitter (ACh. The reduction of ACh level impairs brain functioning. One aspect of AD therapy is to maintain ACh level up to a safe limit, by blocking acetylcholinesterase (AChE, an enzyme that is naturally responsible for its degradation. This research presents an in-silico screening and designing of hAChE inhibitors as potential anti-Alzheimer drugs. Molecular docking results of the database retrieved (synthetic chemicals and dietary phytochemicals and self-drawn ligands were compared with Food and Drug Administration (FDA approved drugs against AD as controls. Furthermore, computational ADME studies were performed on the hits to assess their safety. Human AChE was found to be most approptiate target site as compared to commonly used Torpedo AChE. Among the tested dietry phytochemicals, berberastine, berberine, yohimbine, sanguinarine, elemol and naringenin are the worth mentioning phytochemicals as potential anti-Alzheimer drugs The synthetic leads were mostly dual binding site inhibitors with two binding subunits linked by a carbon chain i.e. second generation AD drugs. Fifteen new heterodimers were designed that were computationally more efficient inhibitors than previously reported compounds. Using computational methods, compounds present in online chemical databases can be screened to design more efficient and safer drugs against cognitive symptoms of AD.

Designing Second Generation Anti-Alzheimer Compounds as Inhibitors of Human Acetylcholinesterase: Computational Screening of Synthetic Molecules and Dietary Phytochemicals.

Science.gov (United States)

Amat-Ur-Rasool, Hafsa; Ahmed, Mehboob

2015-01-01

Alzheimer's disease (AD), a big cause of memory loss, is a progressive neurodegenerative disorder. The disease leads to irreversible loss of neurons that result in reduced level of acetylcholine neurotransmitter (ACh). The reduction of ACh level impairs brain functioning. One aspect of AD therapy is to maintain ACh level up to a safe limit, by blocking acetylcholinesterase (AChE), an enzyme that is naturally responsible for its degradation. This research presents an in-silico screening and designing of hAChE inhibitors as potential anti-Alzheimer drugs. Molecular docking results of the database retrieved (synthetic chemicals and dietary phytochemicals) and self-drawn ligands were compared with Food and Drug Administration (FDA) approved drugs against AD as controls. Furthermore, computational ADME studies were performed on the hits to assess their safety. Human AChE was found to be most approptiate target site as compared to commonly used Torpedo AChE. Among the tested dietry phytochemicals, berberastine, berberine, yohimbine, sanguinarine, elemol and naringenin are the worth mentioning phytochemicals as potential anti-Alzheimer drugs The synthetic leads were mostly dual binding site inhibitors with two binding subunits linked by a carbon chain i.e. second generation AD drugs. Fifteen new heterodimers were designed that were computationally more efficient inhibitors than previously reported compounds. Using computational methods, compounds present in online chemical databases can be screened to design more efficient and safer drugs against cognitive symptoms of AD.

Design and analysis of questionnaires for survey skills in chemical engineering

Directory of Open Access Journals (Sweden)

Susana Lucas

2011-09-01

Full Text Available 800x600 Normal 0 21 false false false CA X-NONE X-NONE The new reorganization of university education has involved relevant changes in teaching and learning methodologies in order to help students to learn more effectively and to develop important skills and competences demanded by the professional world. In this sense the new configuration of the degree in Chemical Engineering required the identification of the main general and transferable skills, the implementation of the new teaching and learning strategies necessary to achieve them and, in addition, an evaluation procedure for determining the importance and the degree of development of a student´s skills and competences. In this exercise, two obligatory chemical reactor engineering subjects of the still in effect Chemical Engineering degree were chosen as examples of competence-based learning disciplines. For each one, a significant group of transferable and specific skills were selected to be developed. The identification and selection of skills was made according to the recommendations of the European Federation of Chemical Engineering (EFCE together with the established requirements in the ministerial order for the new Chemical Engineering Degree (Ministerial order CIN/351/2009. In order to check the effectiveness of teaching strategies in helping students to acquire these abilities, specific questionnaires were designed. These tests allowed for the utility of the competences in question to be evaluated in terms of the students´ professional work as future chemical engineering graduates and also facilitated the perception of skill development acquired through the methodology implemented in these subjects. The results of the skill evaluation questionnaires revealed the importance that both university collectives (students and professors give to the development of transferable skills. These skills included the ability to communicate effectively (including in English, to work in

A Pilot Model for the NASA Simplified Aid for EVA Rescue (SAFER) (Single-Axis Pitch Task)

Science.gov (United States)

Handley, Patrick Mark

This thesis defines, tests, and validates a descriptive pilot model for a single-axis pitch control task of the Simplified Aid for EVA Rescue (SAFER). SAFER is a small propulsive jetpack used by astronauts for self-rescue. Pilot model research supports development of improved self-rescue strategies and technologies through insights into pilot behavior.This thesis defines a multi-loop pilot model. The innermost loop controls the hand controller, the middle loop controls pitch rate, and the outer loop controls pitch angle. A human-in-the-loop simulation was conducted to gather data from a human pilot. Quantitative and qualitative metrics both indicate that the model is an acceptable fit to the human data. Fuel consumption was nearly identical; time to task completion matched very well. There is some evidence that the model responds faster to initial pitch rates than the human, artificially decreasing the model's time to task completion. This pilot model is descriptive, not predictive, of the human pilot. Insights are made into pilot behavior from this research. Symmetry implies that the human responds to positive and negative initial conditions with the same strategy. The human pilot appears indifferent to pitch angles within 0.5 deg, coasts at a constant pitch rate 1.09 deg/s, and has a reaction delay of 0.1 s.

XPERT DESIGN AND DIAGNOSTICS' (XDD) IN-SITU CHEMICAL OXIDATION PROCESS USING POTASSIUM PERMANGANATE (KMNO4)

Science.gov (United States)

Xpert Design and Diagnostic's (XDD)potassium permanganate in situ chemical oxidation (ISCO) process was evaluated under the EPA Superfund Innovative Technology Evaluation (SITE) Program at the former MEC Building site located in Hudson, New Hampshire. At this site, both soil and ...

Safer Prescribing and Care for the Elderly (SPACE): feasibility of audit and feedback plus practice mail-out to patients with high-risk prescribing.

Science.gov (United States)

Wallis, Katharine; Tuckey, Rebecca

2017-06-01

INTRODUCTION High-risk prescribing in general practice is common and places patients at increased risk of adverse events. AIM The Safer Prescribing and Care for the Elderly (SPACE) intervention, comprising audit and feedback plus practice mail-out to patients with high-risk prescribing, was designed to promote medicines review and support safer prescribing. This study aims to test the SPACE intervention feasibility in general practice. METHODS This feasibility study involved an Auckland Primary Health Organisation (PHO), a clinical advisory pharmacist, two purposively sampled urban general practices, and seven GPs. The acceptability and utility of the SPACE intervention were assessed by semi- structured interviews involving study participants, including 11 patients with high-risk prescribing. Interviews were audio-recorded, transcribed verbatim and analysed using a general inductive approach to identify emergent themes. RESULTS The pharmacist said the SPACE intervention facilitated communication with GPs, and provided a platform for their clinical advisory role at no extra cost to the PHO. GPs said the feedback session with the pharmacist was educational but added to time pressures. GPs selected 29 patients for the mail-out. Some GPs were concerned the mail-out might upset patients, but patients said they felt cared for. Some patients intended to take the letter to their next appointment and discuss their medicines with their GP; others said there were already many things to discuss and not enough time. Some patients were confused by the medicines information brochure. DISCUSSION The SPACE intervention is feasible in general practice. The medicines information brochure needs simplification. Further research is needed to test the effect of SPACE on high-risk prescribing.

Designing Solutions by a Student Centred Approach: Integration of Chemical Process Simulation with Statistical Tools to Improve Distillation Systems

Directory of Open Access Journals (Sweden)

Isabel M. Joao

2017-09-01

Full Text Available Projects thematically focused on simulation and statistical techniques for designing and optimizing chemical processes can be helpful in chemical engineering education in order to meet the needs of engineers. We argue for the relevance of the projects to improve a student centred approach and boost higher order thinking skills. This paper addresses the use of Aspen HYSYS by Portuguese chemical engineering master students to model distillation systems together with statistical experimental design techniques in order to optimize the systems highlighting the value of applying problem specific knowledge, simulation tools and sound statistical techniques. The paper summarizes the work developed by the students in order to model steady-state processes, dynamic processes and optimize the distillation systems emphasizing the benefits of the simulation tools and statistical techniques in helping the students learn how to learn. Students strengthened their domain specific knowledge and became motivated to rethink and improve chemical processes in their future chemical engineering profession. We discuss the main advantages of the methodology from the students’ and teachers perspective

An experimental design method leading to chemical Turing patterns.

Science.gov (United States)

Horváth, Judit; Szalai, István; De Kepper, Patrick

2009-05-08

Chemical reaction-diffusion patterns often serve as prototypes for pattern formation in living systems, but only two isothermal single-phase reaction systems have produced sustained stationary reaction-diffusion patterns so far. We designed an experimental method to search for additional systems on the basis of three steps: (i) generate spatial bistability by operating autoactivated reactions in open spatial reactors; (ii) use an independent negative-feedback species to produce spatiotemporal oscillations; and (iii) induce a space-scale separation of the activatory and inhibitory processes with a low-mobility complexing agent. We successfully applied this method to a hydrogen-ion autoactivated reaction, the thiourea-iodate-sulfite (TuIS) reaction, and noticeably produced stationary hexagonal arrays of spots and parallel stripes of pH patterns attributed to a Turing bifurcation. This method could be extended to biochemical reactions.

Static fuel molten salt reactors - simpler, cheaper and safer

International Nuclear Information System (INIS)

Scott, Ian

2015-01-01

The many conceptual designs for Molten Salt Reactors (MSR's) today are all evolutions from the prototype MSR that went critical at Oak Ridge 50 years ago. Critically, they are based on pumping the molten fuel salt from a reaction chamber where the fuel achieves critical mass through a heat exchanger where the resulting heat is transferred to another working fluid. This basic concept was not the first idea that the Oak Ridge scientists considered. Their initial preference was to put the molten salt fuel into tubes, just like solid fuel pellets in their cladding, and circulate a coolant past the tubes. They concluded however that the low thermal conductivity of the salt meant that the tubes could be no wider than 2mm which would be entirely impractical. In this analysis they ignored the contribution of convection to heat transfer in fluids, probably because they were designing an aircraft engine where varying g forces would make convection unreliable. Moltex Energy has re-examined this decision using the modern tools of computational fluid dynamics to simulate convective flow in the molten salt and discovered that in fact tubes of similar diameter to those used for solid fuels are entirely practical. Power densities of 250kW/litre of fuel salt are readily attainable providing a higher overall power density than a PWR reactor. This discovery permits MSR's to be built without any of the complex pumping, passively safe drain systems, on line degassing, filtration and chemical processing needed in pumped MSR's. Their design is very simple and they have many intrinsic safety factors including low pressure operation, chemically unreactive fluids and strongly negative fuel thermal and coolant voiding reactivity coefficients. Most importantly, the highly radioactive fission products are retained in non-volatile form within the fuel tubes in the reactor core. Radioactive fuel salt never leaves the reactor vessel except in an immobile frozen form during

Waste Issues Associated with the Safe Movement of Hazardous Chemicals

International Nuclear Information System (INIS)

Dare, J. H.; Cournoyer, M. E.

2002-01-01

Moving hazardous chemicals presents the risk of exposure for workers engaged in the activity and others that might be in the immediate area. Adverse affects are specific to the chemicals and can range from minor skin, eye, or mucous membrane irritation, to burns, respiratory distress, nervous system dysfunction, or even death. A case study is presented where in the interest of waste minimization; original shipping packaging was removed from a glass bottle of nitric acid, while moving corrosive liquid through a security protocol into a Radiological Control Area (RCA). During the transfer, the glass bottle broke. The resulting release of nitric acid possibly exposed 12 employees with one employee being admitted overnight at a hospital for observation. This is a clear example of administrative controls to reduce the generation of suspect radioactive waste being implemented at the expense of employee health. As a result of this event, material handling procedures that assure the safe movement of hazardous chemicals through a security protocol into a radiological control area were developed. Specifically, hazardous material must be transferred using original shipping containers and packaging. While this represents the potential to increase the generation of suspect radioactive waste in a radiological controlled area, arguments are presented that justify this change. Security protocols for accidental releases are also discussed. In summary, the 12th rule of ''Green Chemistry'' (Inherently Safer Chemistry for Accident Prevention) should be followed: the form of a substance used in a chemical process (Movement of Hazardous Chemicals) should be chosen to minimize the potential for chemical accidents, including releases

Waste Issues Associated with the Safe Movement of Hazardous Chemicals

Energy Technology Data Exchange (ETDEWEB)

Dare, J. H.; Cournoyer, M. E.

2002-02-26

Moving hazardous chemicals presents the risk of exposure for workers engaged in the activity and others that might be in the immediate area. Adverse affects are specific to the chemicals and can range from minor skin, eye, or mucous membrane irritation, to burns, respiratory distress, nervous system dysfunction, or even death. A case study is presented where in the interest of waste minimization; original shipping packaging was removed from a glass bottle of nitric acid, while moving corrosive liquid through a security protocol into a Radiological Control Area (RCA). During the transfer, the glass bottle broke. The resulting release of nitric acid possibly exposed 12 employees with one employee being admitted overnight at a hospital for observation. This is a clear example of administrative controls to reduce the generation of suspect radioactive waste being implemented at the expense of employee health. As a result of this event, material handling procedures that assure the safe movement of hazardous chemicals through a security protocol into a radiological control area were developed. Specifically, hazardous material must be transferred using original shipping containers and packaging. While this represents the potential to increase the generation of suspect radioactive waste in a radiological controlled area, arguments are presented that justify this change. Security protocols for accidental releases are also discussed. In summary, the 12th rule of ''Green Chemistry'' (Inherently Safer Chemistry for Accident Prevention) should be followed: the form of a substance used in a chemical process (Movement of Hazardous Chemicals) should be chosen to minimize the potential for chemical accidents, including releases.

Chemical Plants Remain Vulnerable to Terrorists: A Call to Action

Science.gov (United States)

Lippin, Tobi Mae; McQuiston, Thomas H.; Bradley-Bull, Kristin; Burns-Johnson, Toshiba; Cook, Linda; Gill, Michael L.; Howard, Donna; Seymour, Thomas A.; Stephens, Doug; Williams, Brian K.

2006-01-01

U.S. chemical plants currently have potentially catastrophic vulnerabilities as terrorist targets. The possible consequences of these vulnerabilities echo from the tragedies of the Bhopal incident in 1984 to the terrorist attacks on 11 September 2001 and, most recently, Hurricanes Katrina and Rita. Findings from a 2004 nationwide participatory research study of 125 local union leaders at sites with very large volumes of highly hazardous chemicals suggest that voluntary efforts to achieve chemical plant security are not succeeding. Study respondents reported that companies had only infrequently taken actions that are most effective in preventing or in preparing to respond to a terrorist threat. In addition, companies reportedly often failed to involve key stakeholders, including workers, local unions, and the surrounding communities, in these efforts. The environmental health community thus has an opportunity to play a key role in advocating for and supporting improvements in prevention of and preparation for terrorist attacks. Policy-level recommendations to redress chemical site vulnerabilities and the related ongoing threats to the nation’s security are as follows: a) specify detailed requirements for chemical site assessment and security; b) mandate audit inspections supported by significant penalties for cases of noncompliance; c) require progress toward achieving inherently safer processes, including the minimizing of storage of highly hazardous chemicals; d) examine and require additional effective actions in prevention, emergency preparedness, and response and remediation; e) mandate and fund the upgrading of emergency communication systems; and f) involve workers and community members in plan creation and equip and prepare them to prevent and respond effectively to an incident. PMID:16966080

Impacts of chemical modification on the toxicity of diverse nanocellulose materials to developing zebrafish.

Science.gov (United States)

Harper, Bryan J; Clendaniel, Alicea; Sinche, Federico; Way, Daniel; Hughes, Michael; Schardt, Jenna; Simonsen, John; Stefaniak, Aleksandr B; Harper, Stacey L

2016-06-01

Cellulose is an abundant and renewable resource currently being investigated for utility in nanomaterial form for various promising applications ranging from medical and pharmaceutical uses to mechanical reinforcement and biofuels. The utility of nanocellulose and wide implementation ensures increasing exposure to humans and the environment as nanocellulose-based technologies advance. Here, we investigate how differences in aspect ratio and changes to surface chemistry, as well as synthesis methods, influence the biocompatibility of nanocellulose materials using the embryonic zebrafish. Investigations into the toxicity of neutral, cationic and anionic surface functionalities revealed that surface chemistry had a minimal influence on the overall toxicity of nanocellulose materials. Higher aspect ratio cellulose nanofibers produced by mechanical homogenization were, in some cases, more toxic than other cellulose-based nanofibers or nanocrystals produced by chemical synthesis methods. Using fluorescently labeled nanocellulose we were able to show that nanocellulose uptake did occur in embryonic zebrafish during development. We conclude that the benign nature of nanocellulose materials makes them an ideal platform to systematically investigate the inherent surface features driving nanomaterial toxicity in order to create safer design principles for engineered nanoparticles.

A new approach to design safe CNTs with an understanding of redox potential

OpenAIRE

Tsuruoka, Shuji; Cassee, Flemming R; Castranova, Vincent

2013-01-01

Background Carbon nanotubes (CNTs) are being increasingly industrialized and applied for various products. As of today, although several toxicological evaluations of CNTs have been conducted, designing safer CNTs is not practiced because reaction kinetics of CNTs with bioactive species is not fully understood. Results The authors propose a kinetic mechanism to establish designing safe CNTs as a new goal. According to a literature search on the behavior of CNTs and the effects of impurities, i...

Computing Equilibrium Chemical Compositions

Science.gov (United States)

Mcbride, Bonnie J.; Gordon, Sanford

1995-01-01

Chemical Equilibrium With Transport Properties, 1993 (CET93) computer program provides data on chemical-equilibrium compositions. Aids calculation of thermodynamic properties of chemical systems. Information essential in design and analysis of such equipment as compressors, turbines, nozzles, engines, shock tubes, heat exchangers, and chemical-processing equipment. CET93/PC is version of CET93 specifically designed to run within 640K memory limit of MS-DOS operating system. CET93/PC written in FORTRAN.

Reactor design, cold-model experiment and CFD modeling for chemical looping combustion

Energy Technology Data Exchange (ETDEWEB)

Zhang, Shaohua; Ma, Jinchen; Hu, Xintao; Zhao, Haibo; Wang, Baowen; Zheng, Chuguang [Huazhong Univ. of Science and Technology, Wuhan (China). State Key Lab. of Coal Combustion

2013-07-01

Chemical looping combustion (CLC) is an efficient, clean and cheap technology for CO{sub 2} capture, and an interconnected fluidized bed is more appropriate solution for CLC. This paper aims to design a reactor system for CLC, carry out cold-model experiment of the system, and model fuel reactor using commercial CFD software. As for the CLC system, the air reactor (AR) is designed as a fast fluidized bed while the fuel reactor (FR) is a bubbling bed; a cyclone is used for solid separation of the AR exit flow. The AR and FR are separated by two U-type loop seals to remain gas sealed. Considered the chemical kinetics of oxygen carrier, fluid dynamics, pressure balance and mass balance of the system simultaneously, some key design parameters of a CH{sub 4}-fueled and Fe{sub 2}O{sub 3}/Al{sub 2}O{sub 3}-based CLC reactor (thermal power of 50 kWth) are determined, including key geometric parameters (reactor cross-sectional area and reactor height) and operation parameters (bed material quantity, solid circulation rate, apparent gas velocity of each reactor). A cold-model bench having same geometric parameters with its prototype is built up to study the effects of various operation conditions (including gas velocity in the reactors and loop seals, and bed material height, etc.) on the solids circulation rate, gas leakage, and pressure balance. It is witnessed the cold-model system is able to meet special requirements for CLC system such as gas sealing between AR and FR, the circulation rate and particles residence time. Furthermore, the thermal FR reactor with oxygen carrier of Fe{sub 2}O{sub 3}/Al{sub 2}O{sub 3} and fuel of CH{sub 4} is simulated by commercial CFD solver FLUENT. It is found that for the design case the combustion efficiency of CH{sub 4} reaches 88.2%. A few part of methane is unburned due to fast, large bubbles rising through the reactor.

GREENER CHEMICAL PROCESS DESIGN ALTERNATIVES ARE REVEALED USING THE WASTE REDUCTION DECISION SUPPORT SYSTEM (WAR DSS)

Science.gov (United States)

The Waste Reduction Decision Support System (WAR DSS) is a Java-based software product providing comprehensive modeling of potential adverse environmental impacts (PEI) predicted to result from newly designed or redesigned chemical manufacturing processes. The purpose of this so...

Chemical Hazards and Safety Issues in Fusion Safety Design

International Nuclear Information System (INIS)

Cadwallader, L.C.

2003-01-01

Radiological inventory releases have dominated accident consequences for fusion; these consequences are important to analyze and are generally the most severe result of a fusion facility accident event. However, the advent of, or plan for, large-scale usage of some toxic materials poses the additional hazard of chemical exposure from an accident event. Examples of toxic chemicals are beryllium for magnetic fusion and fluorine for laser fusion. Therefore, chemical exposure consequences must also be addressed in fusion safety assessment. This paper provides guidance for fusion safety analysis. US Department of Energy (DOE) chemical safety assessment practices for workers and the public are reviewed. The US Environmental Protection Agency (EPA) has published some guidance on public exposure to releases of mixtures of chemicals, this guidance has been used to create an initial guideline for treating mixed radiological and toxicological releases in fusion; for example, tritiated hazardous dust from a tokamak vacuum vessel. There is no convenient means to judge the hazard severity of exposure to mixed materials. The chemical fate of mixed material constituents must be reviewed to determine if there is a separate or combined radiological and toxicological carcinogenesis, or if other health threats exist with radiological carcinogenesis. Recommendations are made for fusion facility chemical safety evaluation and safety guidance for protecting the public from chemical releases, since such levels are not specifically identified in the DOE fusion safety standard

Chemical looping reactor system design double loop circulating fluidized bed (DLCFB)

Energy Technology Data Exchange (ETDEWEB)

Bischi, Aldo

2012-05-15

Chemical looping combustion (CLC) is continuously gaining more importance among the carbon capture and storage (CCS) technologies. It is an unmixed combustion process which takes place in two steps. An effective way to realize CLC is to use two interconnected fluidized beds and a metallic powder circulating among them, acting as oxygen carrier. The metallic powder oxidizes at high temperature in one of the two reactors, the air reactor (AR). It reacts in a highly exothermic reaction with the oxygen of the injected fluidising air. Afterwards the particles are sent to the other reactor where the fuel is injected, the fuel reactor (FR). There, they transport heat and oxygen necessary for the reaction with the injected fuel to take place. At high temperatures, the particle's oxygen reacts with the fuel producing Co2 and steam, and the particles are ready to start the loop again. The overall reaction, the sum of the enthalpy changes of the oxygen carrier oxidation and reduction reactions, is the same as for the conventional combustion. Two are the key features, which make CLC promising both for costs and capture efficiency. First, the high inherent irreversibility of the conventional combustion is avoided because the energy is utilized stepwise. Second, the Co2 is intrinsically separated within the process; so there is in principle no need either of extra carbon capture devices or of expensive air separation units to produce oxygen for oxy-combustion. A lot of effort is taking place worldwide on the development of new chemical looping oxygen carrier particles, reactor systems and processes. The current work is focused on the reactor system: a new design is presented, for the construction of an atmospheric 150kWth prototype working with gaseous fuel and possibly with inexpensive oxygen carriers derived from industrial by-products or natural minerals. It consists of two circulating fluidized beds capable to operate in fast fluidization regime; this will increase the

Safer disclosure of HIV serostatus for women living with HIV who experience or fear violence: a systematic review

OpenAIRE

Kennedy, Caitlin E; Haberlen, Sabina; Amin, Avni; Baggaley, Rachel; Narasimhan, Manjulaa

2015-01-01

Introduction: Supporting individuals as they disclose their HIV serostatus may lead to a variety of individual and public health benefits. However, many women living with HIV are hesitant to disclose their HIV status due to fear of negative outcomes such as violence, abandonment, relationship dissolution and stigma. Methods: We conducted a systematic review of studies evaluating interventions to facilitate safer disclosure of HIV status for women living with HIV who experience or fear violenc...

Design of a New Concentration Series for the Orthogonal Sample Design Approach and Estimation of the Number of Reactions in Chemical Systems.

Science.gov (United States)

Shi, Jiajia; Liu, Yuhai; Guo, Ran; Li, Xiaopei; He, Anqi; Gao, Yunlong; Wei, Yongju; Liu, Cuige; Zhao, Ying; Xu, Yizhuang; Noda, Isao; Wu, Jinguang

2015-11-01

A new concentration series is proposed for the construction of a two-dimensional (2D) synchronous spectrum for orthogonal sample design analysis to probe intermolecular interaction between solutes dissolved in the same solutions. The obtained 2D synchronous spectrum possesses the following two properties: (1) cross peaks in the 2D synchronous spectra can be used to reflect intermolecular interaction reliably, since interference portions that have nothing to do with intermolecular interaction are completely removed, and (2) the two-dimensional synchronous spectrum produced can effectively avoid accidental collinearity. Hence, the correct number of nonzero eigenvalues can be obtained so that the number of chemical reactions can be estimated. In a real chemical system, noise present in one-dimensional spectra may also produce nonzero eigenvalues. To get the correct number of chemical reactions, we classified nonzero eigenvalues into significant nonzero eigenvalues and insignificant nonzero eigenvalues. Significant nonzero eigenvalues can be identified by inspecting the pattern of the corresponding eigenvector with help of the Durbin-Watson statistic. As a result, the correct number of chemical reactions can be obtained from significant nonzero eigenvalues. This approach provides a solid basis to obtain insight into subtle spectral variations caused by intermolecular interaction.

Molecular design chemical structure generation from the properties of pure organic compounds

CERN Document Server

Horvath, AL

1992-01-01

This book is a systematic presentation of the methods that have been developed for the interpretation of molecular modeling to the design of new chemicals. The main feature of the compilation is the co-ordination of the various scientific disciplines required for the generation of new compounds. The five chapters deal with such areas as structure and properties of organic compounds, relationships between structure and properties, and models for structure generation. The subject is covered in sufficient depth to provide readers with the necessary background to understand the modeling

Using a collision model to design safer wind turbine rotors for birds

International Nuclear Information System (INIS)

Tucker, V.A.

1996-01-01

A mathematical model for collisions between birds and propeller-type turbine rotors identifies the variables that can be manipulated to reduce the probability that birds will collide with the rotor. This study defines a safety index--the clearance power density--that allows rotors of different sizes and designs to be compared in terms of the amount of wind energy converted to electrical energy per bird collision. The collision model accounts for variations in wind speed during the year and shows that for model rotors with simple, one-dimensional blades, the safety index increases in proportion to rotor diameter, and variable speed rotors have higher safety indexes than constant speed rotors. The safety index can also be increased by enlarging the region near the center of the rotor hub where the blades move slowly enough for birds to avoid them. Painting the blades to make them more visible might have this effect. Model rotors with practical designs can have safety indexes an order of magnitude higher than those for model rotors typical of the constant speeds rotors in common use today. This finding suggests that redesigned rotors could have collision rates with birds perhaps an order of magnitude lower than today's rotors, with no reduction in the production of wind power. The empirical data that exist for collisions between raptors, such as hawks and eagles, and rotors are consistent with the model: the numbers of raptor carcasses found beneath large variable speed rotors, relative to the numbers found under small constant speed rotors, are in the proportions predicted by the collision model rather than in proportion to the areas swept by the rotor blades. However, uncontrolled variables associated with these data prevent a stronger claim of support for the model

Why do drivers become safer over the first three months of driving? A longitudinal qualitative study.

Science.gov (United States)

Day, Marianne R; Thompson, Andrew R; Poulter, Damian R; Stride, Christopher B; Rowe, Richard

2018-08-01

Drivers are at high crash risk when they begin independent driving, with liability decreasing steeply over the first three months. Their behavioural development, and other changes underlying improved safety are not well understood. We adopted an innovative longitudinal qualitative design, with thirteen newly qualified drivers completing a total of 36 semi-structured interviews, one, two and three months after acquiring a full UK driving license. The interviews probed high-risk factors for new drivers, as well as allowing space for generating novel road safety issues. Analysis adopted a dual deductive and inductive interpretative thematic approach, identifying three super-ordinate themes: (1) Improvements in car control skills and situation awareness; (2) A reduction in the thrill of taking risks when driving against a background of generally increasing driving speed; (3) Early concerns about their social status in the eyes of other road users during the early stages of driving, which may put pressure on them to drive faster than they felt comfortable with. The study provides important new leads towards understanding how novice driving becomes safer over the first few months of driving, including how well-studied concepts of driving skill and style may change during development of independent driving, and bringing the less rigorously studied concept of social status into focus. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Chemical Frustration. A Design Principle for the Discovery of New Complex Alloy and Intermetallic Phases, Final Report

Energy Technology Data Exchange (ETDEWEB)

Fredrickson, Daniel C [Univ. of Wisconsin, Madison, WI (United States)

2015-06-23

Final technical report for "Chemical Frustration: A Design Principle for the Discovery of New Complex Alloy and Intermetallic Phases" funded by the Office of Science through the Materials Chemistry Program of the Office of Basic Energy Sciences.

Solar fuels and chemicals system design study (ammonia/nitric acid production process). Volume 2. Conceptual design. Final report

Energy Technology Data Exchange (ETDEWEB)

1986-06-01

As part of the Solar Central Receiver Fuels and Chemicals Program, Foster Wheeler Solar Development Corporation (FWSDC), under contract to Sandia National Laboratories-Livermore (SNLL), developed a conceptual design of a facility to produce ammonia and nitric acid using solar energy as the principal external source of process heat. In the selected process, ammonia is produced in an endothermic reaction within a steam methane (natural gas) reformer. The heat of reaction is provided by molten carbonate salt heated by both a solar central receiver and an exothermic ammonia-fired heater. After absorption by water, the product of the latter reaction is nitric acid.

Integrated supply chain design for commodity chemicals production via woody biomass fast pyrolysis and upgrading.

Science.gov (United States)

Zhang, Yanan; Hu, Guiping; Brown, Robert C

2014-04-01

This study investigates the optimal supply chain design for commodity chemicals (BTX, etc.) production via woody biomass fast pyrolysis and hydroprocessing pathway. The locations and capacities of distributed preprocessing hubs and integrated biorefinery facilities are optimized with a mixed integer linear programming model. In this integrated supply chain system, decisions on the biomass chipping methods (roadside chipping vs. facility chipping) are also explored. The economic objective of the supply chain model is to maximize the profit for a 20-year chemicals production system. In addition to the economic objective, the model also incorporates an environmental objective of minimizing life cycle greenhouse gas emissions, analyzing the trade-off between the economic and environmental considerations. The capital cost, operating cost, and revenues for the biorefinery facilities are based on techno-economic analysis, and the proposed approach is illustrated through a case study of Minnesota, with Minneapolis-St. Paul serving as the chemicals distribution hub. Copyright © 2014 Elsevier Ltd. All rights reserved.

Evaluation of a safer male circumcision training programme for traditional surgeons and nurses in the Eastern Cape, South Africa.

Science.gov (United States)

Peltzer, Karl; Nqeketo, Ayanda; Petros, George; Kanta, Xola

2008-06-18

Training designed to improve circumcision knowledge, attitude and practice was delivered over 5 days to 34 traditional surgeons and 49 traditional nurses in the Eastern Cape, South Africa. Training included the following topics: initiation rites; statutory regulation of traditional male circumcision and initiation into Manhood (TCIM); structure and function of the male sex organs; procedure of safe circumcision, infection control; sexually transmitted infections (STIs); HIV/AIDS; infection control measures; aftercare of the initiate including after care of the circumcision wound and initiate as a whole; detection and early management of common complications of circumcision; nutrition and fluid management; code of conduct and ethics; and sexual health education. The evaluation of the training consisted of a prospective assessment of knowledge and attitude immediately prior to and after training. Significant improvement in knowledge and/or attitudes was observed in legal aspects, STI, HIV and environmental aspects, attitudes in terms of improved collaboration with biomedical health care providers, normal and abnormal anatomy and physiology, sexually transmitted infections and including HIV, circumcision practice and aftercare of initiates. We concluded that safer circumcision training can be successfully delivered to traditional surgeons and nurses.

Green toxicology.

Science.gov (United States)

Maertens, Alexandra; Anastas, Nicholas; Spencer, Pamela J; Stephens, Martin; Goldberg, Alan; Hartung, Thomas

2014-01-01

Historically, early identification and characterization of adverse effects of industrial chemicals was difficult because conventional toxicological test methods did not meet R&D needs for rapid, relatively inexpensive methods amenable to small amounts of test material. The pharmaceutical industry now front-loads toxicity testing, using in silico, in vitro, and less demanding animal tests at earlier stages of product development to identify and anticipate undesirable toxicological effects and optimize product development. The Green Chemistry movement embraces similar ideas for development of less toxic products, safer processes, and less waste and exposure. Further, the concept of benign design suggests ways to consider possible toxicities before the actual synthesis and to apply some structure/activity rules (SAR) and in silico methods. This requires not only scientific development but also a change in corporate culture in which synthetic chemists work with toxicologists. An emerging discipline called Green Toxicology (Anastas, 2012) provides a framework for integrating the principles of toxicology into the enterprise of designing safer chemicals, thereby minimizing potential toxicity as early in production as possible. Green Toxicology`s novel utility lies in driving innovation by moving safety considerations to the earliest stage in a chemical`s lifecycle, i.e., to molecular design. In principle, this field is no different than other subdisciplines of toxicology that endeavor to focus on a specific area - for example, clinical, environmental or forensic toxicology. We use the same principles and tools to evaluate an existing substance or to design a new one. The unique emphasis is in using 21st century toxicology tools as a preventative strategy to "design out" undesired human health and environmental effects, thereby increasing the likelihood of launching a successful, sustainable product. Starting with the formation of a steering group and a series of workshops

"Solvent-in-salt" systems for design of new materials in chemistry, biology and energy research.

Science.gov (United States)

Azov, Vladimir A; Egorova, Ksenia S; Seitkalieva, Marina M; Kashin, Alexey S; Ananikov, Valentine P

2018-02-21

Inorganic and organic "solvent-in-salt" (SIS) systems have been known for decades but have attracted significant attention only recently. Molten salt hydrates/solvates have been successfully employed as non-flammable, benign electrolytes in rechargeable lithium-ion batteries leading to a revolution in battery development and design. SIS with organic components (for example, ionic liquids containing small amounts of water) demonstrate remarkable thermal stability and tunability, and present a class of admittedly safer electrolytes, in comparison with traditional organic solvents. Water molecules tend to form nano- and microstructures (droplets and channel networks) in ionic media impacting their heterogeneity. Such microscale domains can be employed as microreactors for chemical and enzymatic synthesis. In this review, we address known SIS systems and discuss their composition, structure, properties and dynamics. Special attention is paid to the current and potential applications of inorganic and organic SIS systems in energy research, chemistry and biochemistry. A separate section of this review is dedicated to experimental methods of SIS investigation, which is crucial for the development of this field.

Safety in the design of production lines

DEFF Research Database (Denmark)

Dyhrberg, Mette Bang; Broberg, Ole; Jacobsen, Peter

2006-01-01

This paper is a case study report on how safety considerations were handled in the process of redesigning a production line. The design process was characterized as a specification and negotiation process between engineers from the company and the supplier organization. The new production line...... in the specification material nor in their face-to-face meetings with the supplier. Safety aspects were not part of their work practice. On this basis, it was suggested that formal guidelines or procedures for integrating safety in the design of production lines would have no effect. Instead, the researchers set up...... became safer, but not as a result of any intentional plan to integrate safety aspects into the design process. Instead, the supplier’s design of a new piece of equipment had a higher built-in safety level. The engineering team in the company was aware of the importance of safety aspects neither...

EXPLORING THE DESIGN AND USE OF MOLECULAR ANIMATIONS THAT CONFLICT FOR UNDERSTANDING CHEMICAL REACTIONS

Directory of Open Access Journals (Sweden)

Resa M. Kelly

Full Text Available Understanding chemical reactions conceptually involves recognizing characteristics of observable phenomena and envisioning how atoms, ions and molecules move and interact to cause the macroscopic changes. Our research focuses on the development of effective strategies for designing and presenting visualizations (videos and animations to assist students with making connections between macroscopic and molecular level behaviors of chemical reactions. Specifically, we study how students, who view videos of a redox reaction that exhibits obvious signs of macroscopic chemical change, can determine which molecular animation of a set of contrasting animations is best supported by its fit with experimental evidence. Herein we describe how we develop our videos and animations, and how students are learning from this animation task. Students who select inaccurate animation models are often enticed by a model that is easier to explain and fits with their understanding of reaction equations. We note that even though students indicate a preference for one animation over another, they often revise their drawn representations to fit with features from multiple animations. With the assistance of eye tracking research, we are gaining a better understanding of what students view and how they make sense of it.

Construction technique for a chemical plant (II)

International Nuclear Information System (INIS)

1978-08-01

This book deals with design and construction for a chemical plant which includes design and building of steel structure for a chemical plant with types, basic regulation, plan, shop fabrication for steel structure and field construction. It explains design and construction of making building for a chemical construction with measurement, types of building and basic rule of the building, design of the building, constructing plumbing for a chemical plant with plan, management of material, checking for construction, construction of electrical installation on plan, know-how to construction and maintenance.

Importance of deposit information in the design and execution of steam generator chemical cleaning

International Nuclear Information System (INIS)

Flores, O.; Remark, J.

1997-01-01

During the planning stages of the chemical cleaning of the San Onofre Nuclear Generating Station (SONGS) units 2 and 3 steam generators, it was determined that an understanding of the steam generator deposit loading and composition was essential to the design and success of the project. It was also determined that qualification testing, preferably with actual deposits from the SONGS steam generators, was also essential. SONGS units 2 and 3 have Combustion Engineering (CE)-designed pressurized water reactors. Each unit has two CE model 3410 steam generators. Each steam generator has 9350 alloy 600 tubes with 1.9-cm (3/4 in.) outside diameter. Unit 2 began commercial operation in 1983, and unit 3, in 1984. The purpose of this technical paper is to explain the effort and methodology for deposit composition, characterization, and quantification. In addition, the deposit qualification testing and design of the cleaning are discussed

Design criteria for the new waste calcining facility at the Idaho Chemical Processing Plant

International Nuclear Information System (INIS)

Anderson, F.H.; Bingham, G.E.; Buckham, J.A.; Dickey, B.R.; Slansky, C.M.; Wheeler, B.R.

1976-01-01

The New Waste Calcining Facility (NWCF) at the Idaho Chemical Processing Plant (ICPP) is being built to replace the existing fluidized-bed, high-level waste calcining facility (WCF). Performance of the WCF is reviewed, equipment failures in WCF operation are examined, and pilot-plant studies on calciner improvements are given in relation to NWCF design. Design features of the NWCF are given with emphasis on process and equipment improvements. A major feature of the NWCF is the use of remote maintenance facilities for equipment with high maintenance requirements, thereby reducing personnel exposures during maintenance and reducing downtime resulting from plant decontamination. The NWCF will have a design net processing rate of 11.36 m 3 of high-level waste per day, and will incorporate in-bed combustion of kerosene for heating the fluidized bed calciner. The off-gas cleaning system will be similar to that for the WCF

Streamlined Approach for Environmental Restoration (SAFER) Plan for Corrective Action Unit 575: Area 15 Miscellaneous Sites, Nevada National Security Site, Nevada

Energy Technology Data Exchange (ETDEWEB)

Matthews, Patrick [Navarro-Intera, LLC (N-I), Las Vegas, NV (United States)

2014-12-01

This Streamlined Approach for Environmental Restoration (SAFER) Plan addresses the actions needed to achieve closure for Corrective Action Unit (CAU) 575, Area 15 Miscellaneous Sites, identified in the Federal Facility Agreement and Consent Order (FFACO). CAU 575 comprises the following four corrective action sites (CASs) located in Area 15 of the Nevada National Security Site: 15-19-02, Waste Burial Pit, 15-30-01, Surface Features at Borehole Sites, 15-64-01, Decontamination Area, 15-99-03, Aggregate Plant This plan provides the methodology for field activities needed to gather the necessary information for closing each CAS. There is sufficient information and process knowledge from historical documentation and investigations of similar sites regarding the expected nature and extent of potential contaminants to recommend closure of CAU 575 using the SAFER process. Additional information will be obtained by conducting a field investigation to document and verify the adequacy of existing information, to affirm the predicted corrective action decisions, and to provide sufficient data to implement the corrective actions. This will be presented in a closure report that will be prepared and submitted to the Nevada Division of Environmental Protection (NDEP) for review and approval.

Rechargeable nickel-3D zinc batteries: An energy-dense, safer alternative to lithium-ion.

Science.gov (United States)

Parker, Joseph F; Chervin, Christopher N; Pala, Irina R; Machler, Meinrad; Burz, Michael F; Long, Jeffrey W; Rolison, Debra R

2017-04-28

The next generation of high-performance batteries should include alternative chemistries that are inherently safer to operate than nonaqueous lithium-based batteries. Aqueous zinc-based batteries can answer that challenge because monolithic zinc sponge anodes can be cycled in nickel-zinc alkaline cells hundreds to thousands of times without undergoing passivation or macroscale dendrite formation. We demonstrate that the three-dimensional (3D) zinc form-factor elevates the performance of nickel-zinc alkaline cells in three fields of use: (i) >90% theoretical depth of discharge (DOD Zn ) in primary (single-use) cells, (ii) >100 high-rate cycles at 40% DOD Zn at lithium-ion-commensurate specific energy, and (iii) the tens of thousands of power-demanding duty cycles required for start-stop microhybrid vehicles. Copyright © 2017, American Association for the Advancement of Science.

Design of Chemical Literacy Assessment by Using Model of Educational Reconstruction (MER) on Solubility Topic

Science.gov (United States)

Yusmaita, E.; Nasra, Edi

2018-04-01

This research aims to produce instrument for measuring chemical literacy assessment in basic chemistry courses with solubility topic. The construction of this measuring instrument is adapted to the PISA (Programme for International Student Assessment) problem’s characteristics and the Syllaby of Basic Chemistry in KKNI-IndonesianNational Qualification Framework. The PISA is a cross-country study conducted periodically to monitor the outcomes of learners' achievement in each participating country. So far, studies conducted by PISA include reading literacy, mathematic literacy and scientific literacy. Refered to the scientific competence of the PISA study on science literacy, an assessment designed to measure the chemical literacy of the chemistry department’s students in UNP. The research model used is MER (Model of Educational Reconstruction). The validity and reliability values of discourse questions is measured using the software ANATES. Based on the acquisition of these values is obtained a valid and reliable chemical literacy questions.There are seven question items limited response on the topic of solubility with valid category, the acquisition value of test reliability is 0,86, and has a difficulty index and distinguishing good

Identification of Chemical Toxicity Using Ontology Information of Chemicals

Directory of Open Access Journals (Sweden)

Zhanpeng Jiang

2015-01-01

Full Text Available With the advance of the combinatorial chemistry, a large number of synthetic compounds have surged. However, we have limited knowledge about them. On the other hand, the speed of designing new drugs is very slow. One of the key causes is the unacceptable toxicities of chemicals. If one can correctly identify the toxicity of chemicals, the unsuitable chemicals can be discarded in early stage, thereby accelerating the study of new drugs and reducing the R&D costs. In this study, a new prediction method was built for identification of chemical toxicities, which was based on ontology information of chemicals. By comparing to a previous method, our method is quite effective. We hope that the proposed method may give new insights to study chemical toxicity and other attributes of chemicals.

Women's household decision-making autonomy and safer sex negotiation in Nigeria: An analysis of the Nigeria Demographic and Health Survey.

Science.gov (United States)

Sano, Yujiro; Sedziafa, Alice P; Vercillo, Siera; Antabe, Roger; Luginaah, Isaac

2018-02-01

Although married women's safer sex negotiation with their husbands is critical in reducing new HIV infections in Nigeria, its linkage to women's household decision-making autonomy is less explored in Nigeria. Drawing data from the 2013 Nigeria Demographic and Health Survey and using the logistic regression technique, we examined the associations between women's household decision-making autonomy and two indicators of the ability to engage in safer sex including whether married women 1) can refuse sex and 2) ask for condom use during sexual intercourse with husbands. Findings indicate that 64% and 41% of married women can refuse sex and ask for condom use, respectively. While the impact of women's household decision-making autonomy on the ability to refuse sex remained statistically significant after controlling for theoretically relevant variables (OR = 1.15; p < 0.001), its impact on the ability to ask for condom use became weakly significant once socioeconomic variables were controlled (OR = 1.03; p < 0.1). Based on these results, we have two suggestions. First, it may be important that marital-based policies and counselling promote environments in which married women can establish equal power relations with their husbands. Second, it is also important to eliminate structural barriers that hinder married women's economic opportunities in Nigeria.

Right there all along. Latest IOM report lays out how to deliver safer, more effective care by using existing strategies, technology.

Science.gov (United States)

McKinney, Maureen

2012-09-10

Want to make healthcare safer and more cost-effective? You already have the necessary tools, a new IOM report says. "To Err is Human made visible the tremendous problem we had with medical errors, but back then very few systems had this kind of data infrastructure," says Paul Tang, of the Palo Alto (Calif.) Medical Foundation. said. "We're in a much different spot now."

Whole Wafer Design and Fabrication for the Alignment of Nanostructures for Chemical Sensor Applications

Science.gov (United States)

Biaggi-Labiosa, Azlin M.; Hunter, Gary W.

2013-01-01

A major objective in aerospace sensor development is to produce sensors that are small in size, easy to batch fabricate and low in cost, and have low power consumption The fabrication of chemical sensors involving nanostructured materials can provide these properties as well as the potential for the development of sensor systems with unique properties and improved performance. However, the fabrication and processing of nanostructures for sensor applications currently is limited in the ability to control their location on the sensor. Currently, our group at NASA Glenn Research Center has demonstrated the controlled placement of nanostructures in sensors using a sawtooth patterned electrode design. With this design the nanostructures are aligned between opposing sawtooth electrodes by applying an alternating current.

Liposuction-assisted four pedicle-based breast reduction (LAFPBR): A new safer technique of breast reduction for elderly patients.

Science.gov (United States)

La Padula, Simone; Hersant, Barbara; Noel, Warren; Meningaud, Jean Paul

2018-05-01

As older people increasingly care for their body image and remain active longer, the demand for reduction mammaplasty is increasing in this population. Only a few studies of reduction mammaplasty have specifically focussed on the outcomes in elderly women. We developed a new breast reduction technique: the Liposuction-Assisted Four Pedicle-Based Breast Reduction (LAFPBR) that is especially indicated for elderly patients. The aim of this paper was to describe the LAFPBR technique and to determine whether it could be considered a safer option for elderly patients compared to the superomedial pedicle (SMP) technique. A retrospective study included sixty-two women aged 60 years and over who underwent bilateral breast reduction mammaplasty. Thirty-one patients underwent LAFPBR and 31 patients were operated using the SMP technique. Complications and patient satisfaction in both groups were analysed. Patient satisfaction was measured using a validated questionnaire: the client satisfaction questionnaire 8 (CSQ-8). The LAFPBR technique required less operating time, and avoided significant blood loss. Six minor complications were observed in SMP patients. No LAFPBR women developed a procedure-related complication. Patient satisfaction was high with a mean score of 29.65 in LAFPBR patients and 28.68 in SMP patients. The LAFPBR is an easy procedure that appears safer than SMP and results in a high satisfaction rate in elderly women. Copyright © 2018 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

The SAFER guides: empowering organizations to improve the safety and effectiveness of electronic health records.

Science.gov (United States)

Sittig, Dean F; Ash, Joan S; Singh, Hardeep

2014-05-01

Electronic health records (EHRs) have potential to improve quality and safety of healthcare. However, EHR users have experienced safety concerns from EHR design and usability features that are not optimally adapted for the complex work flow of real-world practice. Few strategies exist to address unintended consequences from implementation of EHRs and other health information technologies. We propose that organizations equipped with EHRs should consider the strategy of "proactive risk assessment" of their EHR-enabled healthcare system to identify and address EHR-related safety concerns. In this paper, we describe the conceptual underpinning of an EHR-related self-assessment strategy to provide institutions a foundation upon which they could build their safety efforts. With support from the Office of the National Coordinator for Health Information Technology (ONC), we used a rigorous, iterative process to develop a set of 9 self-assessment tools to optimize the safety and safe use of EHRs. These tools, referred to as the Safety Assurance Factors for EHR Resilience (SAFER) guides, could be used to self-assess safety and effectiveness of EHR implementations, identify specific areas of vulnerability, and create solutions and culture change to mitigate risks. A variety of audiences could conduct these assessments, including frontline clinicians or care teams in different practices, or clinical, quality, or administrative leaders within larger institutions. The guides use a multifaceted systems-based approach to assess risk and empower organizations to work with internal or external stakeholders (eg, EHR developers) on optimizing EHR functionality and using EHRs to drive improvements in the quality and safety of healthcare.

Evaluating Safer Conception Options for HIV-Serodiscordant Couples (HIV-Infected Female/HIV-Uninfected Male: A Closer Look at Vaginal Insemination

Directory of Open Access Journals (Sweden)

Okeoma Mmeje

2012-01-01

Full Text Available HIV serodiscordant couples represent at least half of all HIV-affected couples worldwide. Many of these couples have childbearing desires. Safer methods of conception may allow for pregnancy while minimizing the risk of sexual transmission of HIV. In serodiscordant partnerships with an HIV-infected female and HIV-uninfected male, vaginal insemination of a partner's semen during the fertile period coupled with 100% condom use may be the safest method of conception.

Enhanced teaching and student learning through a simulator-based course in chemical unit operations design

Science.gov (United States)

Ghasem, Nayef

2016-07-01

This paper illustrates a teaching technique used in computer applications in chemical engineering employed for designing various unit operation processes, where the students learn about unit operations by designing them. The aim of the course is not to teach design, but rather to teach the fundamentals and the function of unit operation processes through simulators. A case study presenting the teaching method was evaluated using student surveys and faculty assessments, which were designed to measure the quality and effectiveness of the teaching method. The results of the questionnaire conclusively demonstrate that this method is an extremely efficient way of teaching a simulator-based course. In addition to that, this teaching method can easily be generalised and used in other courses. A student's final mark is determined by a combination of in-class assessments conducted based on cooperative and peer learning, progress tests and a final exam. Results revealed that peer learning can improve the overall quality of student learning and enhance student understanding.

Designing safer composite helmets to reduce rotational accelerations during oblique impacts.

Science.gov (United States)

Mosleh, Yasmine; Cajka, Martin; Depreitere, Bart; Vander Sloten, Jos; Ivens, Jan

2018-05-01

Oblique impact is the most common accident situation that occupants in traffic accidents or athletes in professional sports experience. During oblique impact, the human head is subjected to a combination of linear and rotational accelerations. Rotational movement is known to be responsible for traumatic brain injuries. In this article, composite foam with a column/matrix composite configuration is proposed for head protection applications to replace single-layer uniform foam, to better attenuate rotational movement of the head during oblique impacts. The ability of composite foam in the mitigation of rotational head movement is studied by performing finite element (FE) simulations of oblique impact on flat and helmet shape specimens. The performance of composite foam with respect to parameters such as compliance of the matrix foam and the number, size and cross-sectional shape of the foam columns is explored in detail, and subsequently an optimized structure is proposed. The simulation results show that using composite foam instead of single-layer foam, the rotational acceleration and velocity of the headform can be significantly reduced. The parametric study indicates that using a more compliant matrix foam and by increasing the number of columns in the composite foam configuration, the rotation can be further mitigated. This was confirmed by experimental results. The simulation results were also analyzed based on global head injury criteria such as head injury criterion, rotational injury criterion, brain injury criterion and generalized acceleration model for brain injury threshold which further confirmed the superior performance of composite foam versus single-layer homogeneous expanded polystyrene foam. The findings of simulations give invaluable information for design of protective helmets or, for instance, headliners for the automotive industry.

Chemical optimization algorithm for fuzzy controller design

CERN Document Server

Astudillo, Leslie; Castillo, Oscar

2014-01-01

In this book, a novel optimization method inspired by a paradigm from nature is introduced. The chemical reactions are used as a paradigm to propose an optimization method that simulates these natural processes. The proposed algorithm is described in detail and then a set of typical complex benchmark functions is used to evaluate the performance of the algorithm. Simulation results show that the proposed optimization algorithm can outperform other methods in a set of benchmark functions. This chemical reaction optimization paradigm is also applied to solve the tracking problem for the dynamic model of a unicycle mobile robot by integrating a kinematic and a torque controller based on fuzzy logic theory. Computer simulations are presented confirming that this optimization paradigm is able to outperform other optimization techniques applied to this particular robot application

Damping considerations in CANDU feeder pipe design and analysis

International Nuclear Information System (INIS)

Usmani, S.A.; Saleem, M.A.; So, G.

1990-01-01

Recent developments in pipe damping indicate a trend towards more realistic and less conservative values, which result in less rigid and safer pipe designs. The CANDU-PHW (Canada deuterium uranium, pressurized heavy water) reactor feeder pipe designs have applied similar approaches which permit seismic qualifications without overly restraining these compact arrays of pipes to cater for the large creep and thermal anchor movement. This paper reviews the feeder design aspects, especially pertaining to the design provisions, experimental verification and analytical modelling for seismic qualification in the light of recent pipe dynamic developments. Using illustrative examples, comparison of seismic analysis results is provided for the ASME Code Case N-411 dampings, and those traditionally used in the feeder seismic qualification. The results confirm acceptability of the traditional approach which permit simplified analysis to demonstrate seismic qualificationqualification of CANDU feeder pipes

Formulation design of oral pediatric Acetazolamide suspension: dose uniformity and physico-chemical stability study.

Science.gov (United States)

Santoveña, Ana; Suárez-González, Javier; Martín-Rodríguez, Cristina; Fariña, José B

2017-03-01

The formulation of an active pharmaceutical ingredient (API) as oral solution or suspension in pediatrics is a habitual practice, due to the non-existence of many commercialized medicines in pediatric doses. It is also the simplest way to prepare and administer them to this vulnerable population. The design of a formulation that assures the dose and the system stability depends on the physico-chemical properties of the API. In this study, we formulate a class IV API, Acetazolamide (AZM) as suspension for oral administration to pediatric population. The suspension must comply attributes of quality, safety and efficacy for this route of administration. We use simple compounding procedures, as well as fewer pure excipients, as recommended for children. Mass and uniformity content assays and physical and chemical stability studies were performed. To quantify the API an UPLC method was used. We verified the physico-chemical stability of the suspensions and that they passed the mass test of the European Pharmacopeia (EP), but not the dose uniformity test. This reveals that AZM must be formulated as liquid forms with a more complex system of excipients (not usually indicated in pediatrics), or otherwise solid forms capable of assuring uniformity of mass and dose for every dosage unit.

Incorporation of environmental impact criteria in the design and operation of chemical processes

Directory of Open Access Journals (Sweden)

P.E. Bauer

2004-09-01

Full Text Available Environmental impact assessment is becoming indispensable for the design and operation of chemical plants. Structured and consistent methods for this purpose have experienced a rapid development. The more rigorous and sophisticated these methods become, the greater is the demand for convenient tools. On the other hand, despite the incredible advances in process simulators, some aspects have still not been sufficiently covered. To date, applications of these programs to quantify environmental impacts have been restricted to straightforward examples of steady-state processes. In this work, a life-cycle assessment implementation with the aim of process design will be described, with a brief discussion of a dynamic simulation for analysis of transient state operations, such as process start-up. A case study shows the importance of this analysis in making possible operation at a high performance level with reduced risks to the environment.

Lesson learned from PSA in the design improvement program of KSNP+

International Nuclear Information System (INIS)

Kim, M.R.; Lim, H.K.; Kang, S.K.; Park, K.S.

2001-01-01

KOPEC (Korea Power Engineering Co.) in conjunction with the client KEPCO (Korea Electric Power Corp.) has been developing a highly competitive Improved Korean Standard Nuclear Power Plant named KSNP+. From the beginning of Design Improvement Program, PSA was carried out to assure that the safety level of KSNP+ is maintained or improved in comparison with that of KSNP, the Korean Standard NPP. To achieve the safety goal of KSNP+, PSA team reviewed all design changes that might affect the plant safety. Design vulnerabilities were identified from the PSA results and safety improvement items were recommended to the system designers. Through the Design Improvement Program, KSNP+ became more reliable, safer and economically competitive than KSNP. This was achieved by systematic approach for design optimization and effective use of PSA technology based on past experience and expertise of nuclear power plant. (author)

THE USE OF CHEMICALS AS PLANT REGULATORS. AGRICULTURAL CHEMICALS TECHNOLOGY, NUMBER 8.

Science.gov (United States)

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

ONE OF A SERIES DESIGNED TO ASSIST TEACHERS IN PREPARING POST-SECONDARY STUDENTS FOR AGRICULTURAL CHEMICAL OCCUPATIONS, THIS MODULE IS SPECIFICALLY CONCERNED WITH CHEMICALS AS PLANT REGULATORS. IT WAS DEVELOPED BY A NATIONAL TASK FORCE ON THE BASIS OF DATA FROM STATE STUDIES. SECTIONS INCLUDE -- (1) CHEMICALS AS MODIFIERS OF PLANT GROWTH, (2)…

Design of electrolyzer for carbon dioxide conversion to fuels and chemicals

Science.gov (United States)

Rosen, Jonathan S.

The stabilization of global atmospheric CO2 levels requires a transition towards a renewable energy based economy as well as methods for handling current CO2 output from fossil fuels. Challenges with renewable energy intermittency have thus far limited the use of these alternative energy sources to only a fraction of the current energy portfolio. To enable more widespread use of renewable energy systems, methods of large scale energy storage must be developed to store excess renewable energy when demand is low and allow for combined use of energy storage and renewable systems when demand is high. To date, no one technique has demonstrated energy storage methods on the gigawatt scale needed for integration with renewable sources; therefore the development of suitable energy storage technologies, such as CO2 electrolysis to fuels is needed. In this work, research efforts have focused on two major thrusts related to electrochemical methods of CO 2 conversion to fuels. The first thrust focuses on the synthesis and design of highly efficient anode and cathode catalysts with emphasis on understanding structure-property relationships. A second thrust focuses on the design of novel electrochemical devices for CO2 conversion and integration of synthesized materials into flow cell systems. On the anode side, the synthesis of highly active catalysts using abundant transition metals is crucial to reducing capital costs and enabling widespread use of electrochemical CO2 conversion devices. Highly active mesoporous Co3O4 and metal-substituted Co3O4 water oxidation catalysts were designed to investigate the role of the spinel structure on water oxidation activity. Further analysis of metal substituted samples reveal the importance of the octahedral sites in the spinel structure, which was later used to design an Mg-Co3O4 sample with improved water oxidation activity. The design of efficient cathode materials which can selectivity reduce CO2 to fuels and chemicals is critical to

Results from the fielding of the Bio-surveillance Analysis, Feedback, Evaluation and Response (B-SAFER) system in Albuquerque, New Mexico.

Science.gov (United States)

Forslund, David; Umland, Edith; Brillman, Judith C; Joyce, Ed; Froman, Philip; Burr, Tom; Judd, Stephen L; Picard, Richard; Wokoun, Doug; Joner, Mike; Sewell, C Mack

2003-01-01

Public health authorities need a surveillance system that is sensitive enough to detect a disease outbreak early to enable a proper response. In order to meet this challenge we have deployed a pilot component-based system in Albuquerque, NM as part of the National Biodefense Initiative (BDI). B-SAFER gathers routinely collected data from healthcare institutions to monitor disease events in the community. We describe initial results from the deployment of the system for the past 6 months

Advanced Chemical Propulsion

Science.gov (United States)

Bai, S. Don

2000-01-01

Design, propellant selection, and launch assistance for advanced chemical propulsion system is discussed. Topics discussed include: rocket design, advance fuel and high energy density materials, launch assist, and criteria for fuel selection.

Remedial technology and characterization development at the SRS F/H Retention Basins using the DOE SAFER methodology

International Nuclear Information System (INIS)

Miles, W.C. Jr.; Kuelske, K.J.

1994-01-01

The Streamlined Approach For Environmental Restoration (SAFER) is a strategy used to accelerate and improve the environmental assessment and remediation of the F/H Retention Basins at the Savannah River Site (SRS). TMs strategy combines the data quality objectives (DQO) process and the observational approach to focus on data collection and converge on a remedial action early. This approach emphasizes stakeholder involvement throughout the Remedial Investigation/Feasibility Study (RI/FS) process. The SAFER methodology is being applied to the characterization, technology development, and remediation tasks for the F/H Retention Basins. This ''approach was initiated in the scoping phase of these projects through the involvment of major stakeholders; Department of Energy (DOE)-Savannah River Field Office, DOE-Headquarters, Westinghouse Savannah River Company, United States Environmental Protection Agency (EPA) Region IV, and the state of South Carolina Department of Health and Environmental Control (SCDHEC), in the development of the Remedial Investigation (RI) workplans. A major activity that has been initiated is the development and implementation of a phase I workplan to identify preliminary contaminants of concern (pCOCs). A sampling plan was developed and approved by the major stakeholders for preliminary characterization of wastes remaining in the F/H Retention Basins. The involvement of stakeholders, development of a site conceptual model, development of remedial objectives for probable conditions, identification of the problem and reasonable deviations, and development of initial decision rules in the planning stages will ensure that preliminary data needs are identified and obtained prior to the initiation of the assessment and implementation phases of the projects resulting in the final remediation of the sites in an accelerated and more cost effective manner

Identification of chemicals related to the chemical weapons convention during an interlaboratory proficiency test

NARCIS (Netherlands)

Hooijschuur, E.W.J.; Hulst, A.G.; Jong, A.L. de; Reuver, L.P. de; Krimpen, S.H. van; Baar, B.L.M. van; Wils, E.R.J.; Kientz, C.E.; Brinkman, U.A.Th

2002-01-01

In order to test the ability of laboratories to detect and identify chemicals related to the Chemical Weapons Convention (CWC), which prohibits the development, production, stockpiling and use of chemical weapons, and to designate laboratories for this task, the Technical Secretariat of the

An integrated multi-label classifier with chemical-chemical interactions for prediction of chemical toxicity effects.

Science.gov (United States)

Liu, Tao; Chen, Lei; Pan, Xiaoyong

2018-05-31

Chemical toxicity effect is one of the major reasons for declining candidate drugs. Detecting the toxicity effects of all chemicals can accelerate the procedures of drug discovery. However, it is time-consuming and expensive to identify the toxicity effects of a given chemical through traditional experiments. Designing quick, reliable and non-animal-involved computational methods is an alternative way. In this study, a novel integrated multi-label classifier was proposed. First, based on five types of chemical-chemical interactions retrieved from STITCH, each of which is derived from one aspect of chemicals, five individual classifiers were built. Then, several integrated classifiers were built by integrating some or all individual classifiers. By testing the integrated classifiers on a dataset with chemicals and their toxicity effects in Accelrys Toxicity database and non-toxic chemicals with their performance evaluated by jackknife test, an optimal integrated classifier was selected as the proposed classifier, which provided quite high prediction accuracies and wide applications. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

From ergonomics to design specifications: contributions to the design of a processing machine in a tire company.

Science.gov (United States)

Moraes, A S P; Arezes, P M; Vasconcelos, R

2012-01-01

The development of ergonomics' recommendations, guidelines and standards are attempts to promote the integration of ergonomics into industrial contexts. Such developments result from several sources and professionals and represent the effort that has been done to develop healthier and safer work environments. However, the availability of large amount of data and documents regarding ergonomics does not guarantee their applicability. The main goal of this paper is to use a specific case to demonstrate how ergonomics criteria were developed in order to contribute to the design of workplaces. Based on the obtained results from research undertaken in a tire company, it was observed that the ergonomics criteria should be presented as design specifications in order to be used by engineers and designers. In conclusion, it is observed that the multiple constraint environment impeded the appliance of the ergonomics criteria. It was also observed that the knowledge on technical design and the acquaintance with ergonomic standards, the level of integration in the design team, and the ability to communicate with workers and other technical staff have paramount importance in integrating ergonomics criteria into the design process.

Design of a high-pressure single pulse shock tube for chemical kinetic investigations

International Nuclear Information System (INIS)

Tranter, R. S.; Brezinsky, K.; Fulle, D.

2001-01-01

A single pulse shock tube has been designed and constructed in order to achieve extremely high pressures and temperatures to facilitate gas-phase chemical kinetic experiments. Postshock pressures of greater than 1000 atmospheres have been obtained. Temperatures greater than 1400 K have been achieved and, in principle, temperatures greater than 2000 K are easily attainable. These high temperatures and pressures permit the investigation of hydrocarbon species pyrolysis and oxidation reactions. Since these reactions occur on the time scale of 0.5--2 ms the shock tube has been constructed with an adjustable length driven section that permits variation of reaction viewing times. For any given reaction viewing time, samples can be withdrawn through a specially constructed automated sampling apparatus for subsequent species analysis with gas chromatography and mass spectrometry. The details of the design and construction that have permitted the successful generation of very high-pressure shocks in this unique apparatus are described. Additional information is provided concerning the diaphragms used in the high-pressure shock tube

Positive reinforcement to promote safer sex among clients.

Science.gov (United States)

Raman, S

1992-01-01

The AIDS Research Foundation of India (ARFI) began an intervention program with sex workers in Madras where the women reported that they were willing to use condoms, whereas the customers were not. Accordingly, ARFI is focusing on clients using a positive reinforcement approach: repetition of the desirability of condom use by communication. First, truck drivers and dock workers have been targeted. Drivers interviewed by ARFI were familiar with the condom as a contraceptive method rather than a disease-preventing method, and used it with their wives. The ARFI program has convinced tobacco shopkeepers to stock condoms for drivers. Truckers receive key chains with a holder for a condom. At transit site tea shops songs are aired about road and roadside safety sponsored by a tire manufacturer with a message about rubber (tires and condoms). Women selling sex at transit sites are also educated about the human immunodeficiency virus (HIV) infection and sexually transmitted diseases (STDs) while attempting to increase their level of hygiene. The typical Friday night sex-seeking behavior among dock workers consists of drinking in a wine shop and soliciting sex workers. Port management and unions have also been recruited for promoting AIDS-related education after participating in health education sessions with flip charts and flash cards. Rest rooms display posters on condom use, some men have been recruited as condom holders for distribution on Friday nights, and barber shops also feature posters with messages about safer sex. AIDS/STD prevention programs have to deal with prevailing practices, values, and beliefs. Results indicate increased condom use among clients as shown by increased sales at transit site tobacco shops and shops around the port. In the future the program will pay more attention to improving the negotiation skills of sex workers.

Design of a chemical batch plant : a study of dedicated parallel lines with intermediate storage and the plant performance

OpenAIRE

Verbiest, Floor; Cornelissens, Trijntje; Springael, Johan

2016-01-01

Abstract: Production plants worldwide face huge challenges in satisfying high service levels and outperforming competition. These challenges require appropriate strategic decisions on plant design and production strategies. In this paper, we focus on multiproduct chemical batch plants, which are typically equipped with multiple production lines and intermediate storage tanks. First we extend the existing MI(N) LP design models with the concept of parallel production lines, and optimise the as...

KALIMER design concept report

Energy Technology Data Exchange (ETDEWEB)

Park, Chang Kyu; Kim, Young Cheol; Kim, Young In; Kim, Young Gyun; Kim, Eui Kwang; Song, Hoon; Chung, Hyun Tai; Hwang, Woan; Nam, Cheol; Sub, Sim Yoon; Kim, Yeon Sik; Whan, Wim Myung; Min, Byung Tae; Yoo, Bong; Lee, Jae Han; Lee, Hyeong Yeon; Kim, Jong Bum; Koo, Gyeong Hoi; Ham, Chang Shik; Kwon, Kee Choon; Kim, Jung Taek; Park, Jae Chang; Lee, Jung Woon; Lee, Yong Hee; Kim, Chang Hwoi; Sim, Bong Shick; Hahn, Do Hee; Choi, Jong Hyeun; Kwon, Sang Woon

1997-07-01

KAERI is working for the development of KALIMER and work is being done for methodology development, experimental facility set up and design concept development. The development target of KALIMER has been set as to make KALIMER safer, more economic, more resistant to nuclear proliferation, and yield less impact on the environment. To achieve the target, study has been made for setting up the design concept of KALIMER including the assessment of various possible design alternatives. This report is the results of the study for the KALIMER concept study and describes the design concept of KALIMER. The developed design concept study and describes the design concept of KALIMER. The developed design concept is to be used as the starting point of the next development phase of conceptual design and the concept will be refined and modified in the conceptual design phase. The scope of the work has been set as the NSSS and essential BOP systems. For systems, NSSS and functionally related major BOP are covered. Sizing and specifying conceptual structure are covered for major equipment. Equipment and piping are arranged for the parts where the arrangement is critical in fulfilling the foresaid intention of setting up the KALIMER design concept. This report consists of 10 chapters. Chapter 2 is for the top level design requirements of KALIMER and it serves as the basis of KALIMER design concept development. Chapter 3 summarizes the KALIMER concept and describes the general design features. The remaining chapters are for specific systems. (author). 29 tabs., 37 figs.

KALIMER design concept report

International Nuclear Information System (INIS)

Park, Chang Kyu; Kim, Young Cheol; Kim, Young In; Kim, Young Gyun; Kim, Eui Kwang; Song, Hoon; Chung, Hyun Tai; Hwang, Woan; Nam, Cheol; Sim Yoon Sub; Kim, Yeon Sik; Wim Myung Whan; Min, Byung Tae; Yoo, Bong; Lee, Jae Han; Lee, Hyeong Yeon; Kim, Jong Bum; Koo, Gyeong Hoi; Ham, Chang Shik; Kwon, Kee Choon; Kim, Jung Taek; Park, Jae Chang; Lee, Jung Woon; Lee, Yong Hee; Kim, Chang Hwoi; Sim, Bong Shick; Hahn, Do Hee; Choi, Jong Hyeun; Kwon, Sang Woon.

1997-07-01

KAERI is working for the development of KALIMER and work is being done for methodology development, experimental facility set up and design concept development. The development target of KALIMER has been set as to make KALIMER safer, more economic, more resistant to nuclear proliferation, and yield less impact on the environment. To achieve the target, study has been made for setting up the design concept of KALIMER including the assessment of various possible design alternatives. This report is the results of the study for the KALIMER concept study and describes the design concept of KALIMER. The developed design concept study and describes the design concept of KALIMER. The developed design concept is to be used as the starting point of the next development phase of conceptual design and the concept will be refined and modified in the conceptual design phase. The scope of the work has been set as the NSSS and essential BOP systems. For systems, NSSS and functionally related major BOP are covered. Sizing and specifying conceptual structure are covered for major equipment. Equipment and piping are arranged for the parts where the arrangement is critical in fulfilling the foresaid intention of setting up the KALIMER design concept. This report consists of 10 chapters. Chapter 2 is for the top level design requirements of KALIMER and it serves as the basis of KALIMER design concept development. Chapter 3 summarizes the KALIMER concept and describes the general design features. The remaining chapters are for specific systems. (author). 29 tabs., 37 figs

Designing Focused Chemical Libraries Enriched in Protein-Protein Interaction Inhibitors using Machine-Learning Methods

Science.gov (United States)

Reynès, Christelle; Host, Hélène; Camproux, Anne-Claude; Laconde, Guillaume; Leroux, Florence; Mazars, Anne; Deprez, Benoit; Fahraeus, Robin; Villoutreix, Bruno O.; Sperandio, Olivier

2010-01-01

Protein-protein interactions (PPIs) may represent one of the next major classes of therapeutic targets. So far, only a minute fraction of the estimated 650,000 PPIs that comprise the human interactome are known with a tiny number of complexes being drugged. Such intricate biological systems cannot be cost-efficiently tackled using conventional high-throughput screening methods. Rather, time has come for designing new strategies that will maximize the chance for hit identification through a rationalization of the PPI inhibitor chemical space and the design of PPI-focused compound libraries (global or target-specific). Here, we train machine-learning-based models, mainly decision trees, using a dataset of known PPI inhibitors and of regular drugs in order to determine a global physico-chemical profile for putative PPI inhibitors. This statistical analysis unravels two important molecular descriptors for PPI inhibitors characterizing specific molecular shapes and the presence of a privileged number of aromatic bonds. The best model has been transposed into a computer program, PPI-HitProfiler, that can output from any drug-like compound collection a focused chemical library enriched in putative PPI inhibitors. Our PPI inhibitor profiler is challenged on the experimental screening results of 11 different PPIs among which the p53/MDM2 interaction screened within our own CDithem platform, that in addition to the validation of our concept led to the identification of 4 novel p53/MDM2 inhibitors. Collectively, our tool shows a robust behavior on the 11 experimental datasets by correctly profiling 70% of the experimentally identified hits while removing 52% of the inactive compounds from the initial compound collections. We strongly believe that this new tool can be used as a global PPI inhibitor profiler prior to screening assays to reduce the size of the compound collections to be experimentally screened while keeping most of the true PPI inhibitors. PPI-HitProfiler is

Designing focused chemical libraries enriched in protein-protein interaction inhibitors using machine-learning methods.

Directory of Open Access Journals (Sweden)

Christelle Reynès

2010-03-01

Full Text Available Protein-protein interactions (PPIs may represent one of the next major classes of therapeutic targets. So far, only a minute fraction of the estimated 650,000 PPIs that comprise the human interactome are known with a tiny number of complexes being drugged. Such intricate biological systems cannot be cost-efficiently tackled using conventional high-throughput screening methods. Rather, time has come for designing new strategies that will maximize the chance for hit identification through a rationalization of the PPI inhibitor chemical space and the design of PPI-focused compound libraries (global or target-specific. Here, we train machine-learning-based models, mainly decision trees, using a dataset of known PPI inhibitors and of regular drugs in order to determine a global physico-chemical profile for putative PPI inhibitors. This statistical analysis unravels two important molecular descriptors for PPI inhibitors characterizing specific molecular shapes and the presence of a privileged number of aromatic bonds. The best model has been transposed into a computer program, PPI-HitProfiler, that can output from any drug-like compound collection a focused chemical library enriched in putative PPI inhibitors. Our PPI inhibitor profiler is challenged on the experimental screening results of 11 different PPIs among which the p53/MDM2 interaction screened within our own CDithem platform, that in addition to the validation of our concept led to the identification of 4 novel p53/MDM2 inhibitors. Collectively, our tool shows a robust behavior on the 11 experimental datasets by correctly profiling 70% of the experimentally identified hits while removing 52% of the inactive compounds from the initial compound collections. We strongly believe that this new tool can be used as a global PPI inhibitor profiler prior to screening assays to reduce the size of the compound collections to be experimentally screened while keeping most of the true PPI inhibitors. PPI

Designing focused chemical libraries enriched in protein-protein interaction inhibitors using machine-learning methods.

Science.gov (United States)

Reynès, Christelle; Host, Hélène; Camproux, Anne-Claude; Laconde, Guillaume; Leroux, Florence; Mazars, Anne; Deprez, Benoit; Fahraeus, Robin; Villoutreix, Bruno O; Sperandio, Olivier

2010-03-05

Protein-protein interactions (PPIs) may represent one of the next major classes of therapeutic targets. So far, only a minute fraction of the estimated 650,000 PPIs that comprise the human interactome are known with a tiny number of complexes being drugged. Such intricate biological systems cannot be cost-efficiently tackled using conventional high-throughput screening methods. Rather, time has come for designing new strategies that will maximize the chance for hit identification through a rationalization of the PPI inhibitor chemical space and the design of PPI-focused compound libraries (global or target-specific). Here, we train machine-learning-based models, mainly decision trees, using a dataset of known PPI inhibitors and of regular drugs in order to determine a global physico-chemical profile for putative PPI inhibitors. This statistical analysis unravels two important molecular descriptors for PPI inhibitors characterizing specific molecular shapes and the presence of a privileged number of aromatic bonds. The best model has been transposed into a computer program, PPI-HitProfiler, that can output from any drug-like compound collection a focused chemical library enriched in putative PPI inhibitors. Our PPI inhibitor profiler is challenged on the experimental screening results of 11 different PPIs among which the p53/MDM2 interaction screened within our own CDithem platform, that in addition to the validation of our concept led to the identification of 4 novel p53/MDM2 inhibitors. Collectively, our tool shows a robust behavior on the 11 experimental datasets by correctly profiling 70% of the experimentally identified hits while removing 52% of the inactive compounds from the initial compound collections. We strongly believe that this new tool can be used as a global PPI inhibitor profiler prior to screening assays to reduce the size of the compound collections to be experimentally screened while keeping most of the true PPI inhibitors. PPI-HitProfiler is

Chemical Equilibrium And Transport (CET)

Science.gov (United States)

Mcbride, B. J.

1991-01-01

Powerful, machine-independent program calculates theoretical thermodynamic properties of chemical systems. Aids in design of compressors, turbines, engines, heat exchangers, and chemical processing equipment.

Understanding international road safety disparities: Why is Australia so much safer than the United States?

Science.gov (United States)

Marshall, Wesley E

2018-02-01

Despite similarities to the US in terms of transportation, land use, and culture, Australia kills 5.3 people per 100,000 population on the roads each year, as compared to the US rate of 12.4. Similar trends hold when accounting for distance driven and the number of registered cars. This paper seeks to understand what is behind the road safety disparities between these two countries. The results suggest that a number of inter-related factors seem to play a role in the better road safety outcomes of Australia as compared to the US. This includes Australia's strategies related to seat belt usage and impaired driving as well as their efforts to help curb vehicle speeds and reduce exposure. Design-related differences include a much greater reliance on roundabouts and narrower street cross-sections as well as guidelines that encourage self-enforcing roads. Policy-related differences include stronger and more extensive enforcement programs, restrictive licensing programs, and higher driving costs. Combined with a more urban population and multimodal infrastructure, Australia tends to discourage driving mileage and exposure while encouraging safer modes of transportation such as transit, at least more so than in most of the US. Australia also enacted their version of Vision Zero - called the Safe System Approach - more than a decade before similar policies began cropping up in US cities. While it is difficult to attribute recent road safety successes to any specific policy, Australia continues to expand their lead on the US in terms of safety outcomes and is a road safety example worthy of consideration. Copyright © 2017 Elsevier Ltd. All rights reserved.

Using Genome Sequence to Enable the Design of Medicines and Chemical Probes.

Science.gov (United States)

Angelbello, Alicia J; Chen, Jonathan L; Childs-Disney, Jessica L; Zhang, Peiyuan; Wang, Zi-Fu; Disney, Matthew D

2018-02-28

Rapid progress in genome sequencing technology has put us firmly into a postgenomic era. A key challenge in biomedical research is harnessing genome sequence to fulfill the promise of personalized medicine. This Review describes how genome sequencing has enabled the identification of disease-causing biomolecules and how these data have been converted into chemical probes of function, preclinical lead modalities, and ultimately U.S. Food and Drug Administration (FDA)-approved drugs. In particular, we focus on the use of oligonucleotide-based modalities to target disease-causing RNAs; small molecules that target DNA, RNA, or protein; the rational repurposing of known therapeutic modalities; and the advantages of pharmacogenetics. Lastly, we discuss the remaining challenges and opportunities in the direct utilization of genome sequence to enable design of medicines.

Rotor-stator spinning disc reactor

NARCIS (Netherlands)

Meeuwse, M.

2011-01-01

The chemical industry is continuously working to make the production more efficient and safer. Process intensification is the trend in which new equipment and processing methods are developed, which require less energy, are safer and produce less waste products. The main improvements can be made by

The Chemical Product Simulator - ProCAPD

DEFF Research Database (Denmark)

Kalakul, Sawitree; Eden, Mario Richard; Gani, Rafiqul

2017-01-01

In this paper, a chemical product design simulator called ProCAPD is presented. ProCAPD works in the same way as a chemical process simulator, that is, it helps to verify product design decisions and generates information that can be used to make design decisions. Like the contents of the process...... simulator, the product simulator needs a database of chemicals and properties, a library of models, numerical routines to solve mathematical problems as well as various calculation options. Also, like the process simulator, the product simulator comes with a user-interface to describe the problems.......); calculation tools (product attributes, blend compositions, environmental impact, etc.); design templates (single molecules, blends, formulations, emulsions, devices); and, design-simulation-analysis functions. All these capabilities are based on the prototype tool developed by Kalakul et al. (2017...

Additive mixture effects of estrogenic chemicals in human cell-based assays can be influenced by inclusion of chemicals with differing effect profiles.

Directory of Open Access Journals (Sweden)

Richard Mark Evans

Full Text Available A growing body of experimental evidence indicates that the in vitro effects of mixtures of estrogenic chemicals can be well predicted from the estrogenicity of their components by the concentration addition (CA concept. However, some studies have observed small deviations from CA. Factors affecting the presence or observation of deviations could include: the type of chemical tested; number of mixture components; mixture design; and assay choice. We designed mixture experiments that address these factors, using mixtures with high numbers of components, chemicals from diverse chemical groups, assays with different in vitro endpoints and different mixture designs and ratios. Firstly, the effects of mixtures composed of up to 17 estrogenic chemicals were examined using estrogenicity assays with reporter-gene (ERLUX and cell proliferation (ESCREEN endpoints. Two mixture designs were used: 1 a 'balanced' design with components present in proportion to a common effect concentration (e.g. an EC(10 and 2 a 'non-balanced' design with components in proportion to potential human tissue concentrations. Secondly, the individual and simultaneous ability of 16 potential modulator chemicals (each with minimal estrogenicity to influence the assay outcome produced by a reference mixture of estrogenic chemicals was examined. Test chemicals included plasticizers, phthalates, metals, PCBs, phytoestrogens, PAHs, heterocyclic amines, antioxidants, UV filters, musks, PBDEs and parabens. In all the scenarios tested, the CA concept provided a good prediction of mixture effects. Modulation studies revealed that chemicals possessing minimal estrogenicity themselves could reduce (negatively modulate the effect of a mixture of estrogenic chemicals. Whether the type of modulation we observed occurs in practice most likely depends on the chemical concentrations involved, and better information is required on likely human tissue concentrations of estrogens and of potential

Additive mixture effects of estrogenic chemicals in human cell-based assays can be influenced by inclusion of chemicals with differing effect profiles.

Science.gov (United States)

Evans, Richard Mark; Scholze, Martin; Kortenkamp, Andreas

2012-01-01

A growing body of experimental evidence indicates that the in vitro effects of mixtures of estrogenic chemicals can be well predicted from the estrogenicity of their components by the concentration addition (CA) concept. However, some studies have observed small deviations from CA. Factors affecting the presence or observation of deviations could include: the type of chemical tested; number of mixture components; mixture design; and assay choice. We designed mixture experiments that address these factors, using mixtures with high numbers of components, chemicals from diverse chemical groups, assays with different in vitro endpoints and different mixture designs and ratios. Firstly, the effects of mixtures composed of up to 17 estrogenic chemicals were examined using estrogenicity assays with reporter-gene (ERLUX) and cell proliferation (ESCREEN) endpoints. Two mixture designs were used: 1) a 'balanced' design with components present in proportion to a common effect concentration (e.g. an EC(10)) and 2) a 'non-balanced' design with components in proportion to potential human tissue concentrations. Secondly, the individual and simultaneous ability of 16 potential modulator chemicals (each with minimal estrogenicity) to influence the assay outcome produced by a reference mixture of estrogenic chemicals was examined. Test chemicals included plasticizers, phthalates, metals, PCBs, phytoestrogens, PAHs, heterocyclic amines, antioxidants, UV filters, musks, PBDEs and parabens. In all the scenarios tested, the CA concept provided a good prediction of mixture effects. Modulation studies revealed that chemicals possessing minimal estrogenicity themselves could reduce (negatively modulate) the effect of a mixture of estrogenic chemicals. Whether the type of modulation we observed occurs in practice most likely depends on the chemical concentrations involved, and better information is required on likely human tissue concentrations of estrogens and of potential modulators

Chemicals-Based Formulation Design: Virtual Experimentations

DEFF Research Database (Denmark)

Conte, Elisa; Gani, Rafiqul

2011-01-01

This paper presents a systematic procedure for virtual experimentations related to the design of liquid formulated products. All the experiments that need to be performed when designing a liquid formulated product (lotion), such as ingredients selection and testing, solubility tests, property mea...... on the design of an insect repellent lotion will show that the software is an essential instrument in decision making, and that it reduces time and resources since experimental efforts can be focused on one or few product alternatives....

HF/DF chemical labs

International Nuclear Information System (INIS)

Meinzer, R.A.

1987-01-01

This paper provides the essential details to understand and design HF/DF and related types of chemical lasers. The basic operation of the HF/DF chemical laser is described. The details of the excitation chemistry are presented and the pertinent laser physics is described. A description of the various laser components is given and the analytical models for the HF/DF chemical laser are discussed. A brief description of the chain reaction HF/DF chemical laser is offered

Argentine criteria on nuclear safety and emergencies: their impact on the Argos PHWR 380 design

International Nuclear Information System (INIS)

Gonzalez, A. J.

1988-01-01

This paper describes first the safety criteria of the Argentine regulatory authority with emphasis on the probabilistic safety criteria based on a limitation of individual risks. Then, it is presented a discussion on emergency criteria in relation to evacuation and relocation measures. Finally, the paper briefly describes the design of an Argentine offer for a safer heavy water reactor where these criteria are applied. 9 figs., 1 tab., 46 refs. (author)

Surrogate models and optimal design of experiments for chemical kinetics applications

KAUST Repository

Bisetti, Fabrizio

2015-01-07

Kinetic models for reactive flow applications comprise hundreds of reactions describing the complex interaction among many chemical species. The detailed knowledge of the reaction parameters is a key component of the design cycle of next-generation combustion devices, which aim at improving conversion efficiency and reducing pollutant emissions. Shock tubes are a laboratory scale experimental configuration, which is widely used for the study of reaction rate parameters. Important uncertainties exist in the values of the thousands of parameters included in the most advanced kinetic models. This talk discusses the application of uncertainty quantification (UQ) methods to the analysis of shock tube data as well as the design of shock tube experiments. Attention is focused on a spectral framework in which uncertain inputs are parameterized in terms of canonical random variables, and quantities of interest (QoIs) are expressed in terms of a mean-square convergent series of orthogonal polynomials acting on these variables. We outline the implementation of a recent spectral collocation approach for determining the unknown coefficients of the expansion, namely using a sparse, adaptive pseudo-spectral construction that enables us to obtain surrogates for the QoIs accurately and efficiently. We first discuss the utility of the resulting expressions in quantifying the sensitivity of QoIs to uncertain inputs, and in the Bayesian inference key physical parameters from experimental measurements. We then discuss the application of these techniques to the analysis of shock-tube data and the optimal design of shock-tube experiments for two key reactions in combustion kinetics: the chain-brancing reaction H + O2 ←→ OH + O and the reaction of Furans with the hydroxyl radical OH.

Sardasht-Iran cohort study of chemical warfare victims: design and methods.

Science.gov (United States)

Ghazanfari, Tooba; Faghihzadeh, Soghrat; Aragizadeh, Hassan; Soroush, Mohammad-Reza; Yaraee, Roya; Mohammad Hassan, Zuhair; Foroutan, Abbas; Vaez-Mahdavi, Mohammad-Reza; Javadi, Mohammad-Ali; Moaiedmohseni, Sakine; Azizi, Fereidoun; Panahi, Yunes; Mostafaie, Ali; Ghasemi, Hassan; Shams, Jalaleddin; Pourfarzam, Shahryar; Jalali-Nadoushan, Mohammad-Reza; Fallahi, Faramarz; Ebtekar, Massoumeh; Davoudi, Seyyed-Masoud; Ghazanfari, Zeinab; Ardestani, Sussan K; Shariat-Panahi, Shamsa; Moin, Athar; Rezaei, Abbas; Kariminia, Amina; Ajdary, Soheila; Mahmoudi, Mahmoud; Roshan, Rasoul; Ghaderi, Sulayman; Babai, Mahmoud; Naghizadeh, Mohammad-Mehdi; Ghanei, Mohammad-Mostafa

2009-01-01

Insights into long-term clinical consequences of sulfur mustard have emerged from some investigations but less is known about the basic and molecular mechanisms of these complications. Sardasht-Iran Cohort Study is a comprehensive historical cohort study on Sardasht chemical victims' population which was designed to find out the long-term complications of sulfur mustard exposure and the basic mechanisms underlying clinical manifestations. This paper describes the design and methodology of Sardasht-Iran Cohort Study. In Sardasht-Iran Cohort Study, 500 individuals including 372 subjects from Sardasht, as the exposed group, and 128 subjects from Rabat, as the unexposed age-matched control group were evaluated. The exposed group was divided into two groups based on the severity of clinical complications at the time of exposure. Different samples including blood, sputum, saliva, tear, urine, and semen were collected for immunologic, hematologic, biochemical, and other laboratory analysis. Data were gathered from medical records, clinical examinations, laboratory tests, and questionnaires for psychological and lifestyle situations. The important distinctions setting this study apart from the previous ones are discussed. The Sardasht-Iran Cohort Study provides important information on various aspects of long-term consequences of sulfur mustard exposure. This database will provide a better position to suggest guidelines for the diagnosis, treatment, and prevention of delayed complications in the patients exposed to sulfur mustard.

Construction technique for a chemical plant (I)

International Nuclear Information System (INIS)

1978-08-01

This book mentions the order of plant construction, building plant and related regulations, basic engineering design data, provide of equipment, plan and management on building plant, quality control, the budget and contract for building plant, public works for building chemical plant like road construction, basic plan and building for a chemical plant, introduction and principle on foundation improvement method, including pile foundation and design for footing, construction and installation for a chemical plant and a rotary machine for a chemical plant.

Analysis and Study of Safety Problems in Chemical Process Design%化工工艺设计中的安全问题分析与研究

Institute of Scientific and Technical Information of China (English)

王玲

2016-01-01

In the chemical industry,because of the special reaction conditions such as high temperature and high pressure, catalyst and so on,there will be a lot of gas and heat,often dangerous chemicals are added to the reaction,often leading to some safety accidents.Such safety accidents on the lives of people and the interests of chemical companies posed a great threat,so the chemical industry should begiven to the chemical process design in the safety of a high degree of attention to improve the quality of chemical process design,chemical technology as much as possible To avoid the emergence of security issues.The contents and characteristics of the chemical process design,the safety problems in the chemical process design and the countermeasures are discussed.%在化工生产中，因为高温高压、催化剂等特殊的反应条件，会产生大量的气体与热量，加上反应时经常使用危险化学品，常常引发一些安全事故。这类安全事故对人们的生命安全以及化工企业的利益造成了很大的威胁，因此化工企业应给予化工工艺设计中的安全问题高度的重视，提高化工工艺设计质量，在化学工艺中尽可能地避免安全问题的出现。就化工工艺设计的内容与特点、化工工艺设计中存在的安全问题以及解决对策进行了论述。

Case study on chemical plant accidents for flow-sheet design of the HTTR-IS system

International Nuclear Information System (INIS)

Homma, Hiroyuki; Sato, Hiroyuki; Kasahara, Seiji; Hara, Teruo; Kato, Ryoma; Sakaba, Nariaki; Ohashi, Hirofumi

2007-02-01

At the present time, we are alarmed by depletion of fossil energy and adverse effect of rapid increase in fossil fuel burning on environment such as climate changes and acid rain, because our lives depend still heavily upon fossil energy. It is thus widely recognized that hydrogen is one of important future energy carriers in which it is used without emission of carbon dioxide greenhouse gas and atmospheric pollutants and that hydrogen demand will increase greatly as fuel cells are developed and applied widely in the near future. To meet massive demand of hydrogen, hydrogen production from water utilizing nuclear, especially by thermochemical water-splitting Iodine-Sulphur (IS) process utilizing heat from High-Temperature Gas-cooled Reactors (HTGRs), offers one of the most attractive zero-emission energy strategies and the only one practical on a substantial scale. However, to establish a technology based for the HTGR hydrogen production by the IS process, we should close several technology gaps through R and D with the High-Temperature Engineering Test Reactor (HTTR), which is the only Japanese HTGR built and operated at the Oarai Research and Development Centre of Japan Atomic Energy Agency (JAEA). We have launched design studies of the IS process hydrogen production system coupled with the HTTR (HTTR-IS system) to demonstrate HTGR hydrogen production. In designing the HTTR-IS system, it is necessary to consider preventive and breakdown maintenance against accidents occurred in the IS process as a chemical plant. This report describes case study on chemical plant accidents relating to the IS process plant and shows a proposal of accident protection measures based on above case study, which is necessary for flow-sheet design of the HTTR-IS system. (author)

Process/Equipment Co-Simulation on Syngas Chemical Looping Process

Energy Technology Data Exchange (ETDEWEB)

Zeng, Liang; Zhou, Qiang; Fan, Liang-Shih

2012-09-30

The chemical looping strategy for fossil energy applications promises to achieve an efficient energy conversion system for electricity, liquid fuels, hydrogen and/or chemicals generation, while economically separate CO{sub 2} by looping reaction design in the process. Chemical looping particle performance, looping reactor engineering, and process design and applications are the key drivers to the success of chemical looping process development. In order to better understand and further scale up the chemical looping process, issues such as cost, time, measurement, safety, and other uncertainties need to be examined. To address these uncertainties, advanced reaction/reactor modeling and process simulation are highly desired and the modeling efforts can accelerate the chemical looping technology development, reduce the pilot-scale facility design time and operating campaigns, as well as reduce the cost and technical risks. The purpose of this work is thus to conduct multiscale modeling and simulations on the key aspects of chemical looping technology, including particle reaction kinetics, reactor design and operation, and process synthesis and optimization.

Crime and public transport: designing a safer journey

CSIR Research Space (South Africa)

Kruger, Tinus

2007-07-01

Full Text Available This paper addresses issues related to transport and security with a particular focus on the role that the physical environment plays in increasing or reducing opportunities for crime. The focus is on crime problems on public transport and the use...

VPPD Lab - The Chemical Product Simulator

DEFF Research Database (Denmark)

Kalakul, Sawitree; Hussain, Rehan; Elbashir, Nimir

2015-01-01

, detergent, etc.). It has interface to identify workflow/data-flow for the inter-related activities between knowledge-based system and model-based calculation procedures to systematically, efficiently and robustly solve various types of product design-analysis problems. The application of the software......In this paper, the development of a systematic model-based framework for product design, implemented in the new product design software called VPPD-Lab is presented. This framework employs its in-house knowledge-based system to design and evaluate chemical products. The built-in libraries...... of product performance models and product-chemical property models are used to evaluate different classes of product. The product classes are single molecular structure chemicals (lipids, solvents, aroma, etc.), blended products (gasoline, jet-fuels, lubricants, etc.), and emulsified product (hand wash...

Measuring emotions in traffic : paper presented at the ESF Congress ‘Towards Safer Road Traffic in Southern Europe’, May 31st-June 2nd 2001, Ankara, Turkey.

NARCIS (Netherlands)

Mesken, J.

2002-01-01

This paper contains the text of a presentation held at the European Science Foundation Congress ‘Towards Safer Road Traffic in Southern Europe’ (May 31st – June 2nd, 2001, Ankara , Turkey). In this paper, methods to measure emotions are reviewed and possible applications for traffic research are

Novelties in design and construction of the advanced reactors

International Nuclear Information System (INIS)

Acosta Ezcurra, T.; Garcia Rodriguez, B.M.

1996-01-01

The advanced pressurized water reactors (APWR), advanced boiling water reactors (ABWR), advanced liquid metal reactors (ALMR), and modular high temperature gas-cooled reactors (MHTGR), as well as heavy water reactors (AHWR), are analyzed taking into account those characteristics which make them less complex, but safer than their current homologous ones. This fact simplifies their construction which reduces completion periods and costs, increasing safety and protection of the plants. It is demonstrated how the accumulated operational experience allows to find more standardized designs with some enhancement in the material and component technology and thus achieve also a better use of computerized systems

Streamlined Approach for Environmental Restoration (SAFER) Plan for Corrective Action Unit 544: Cellars, Mud Pits, and Oil Spills, Nevada Test Site, Nevada, Revision 0

Energy Technology Data Exchange (ETDEWEB)

Mark Krauss

2010-07-01

recommendation for closure of the remaining CASs in CAU 544. This will be presented in a closure report (CR) that will be prepared and submitted to the Nevada Division of Environmental Protection (NDEP) for review and approval. The sites will be investigated based on the data quality objectives (DQOs) developed on April 27, 2010, by representatives of NDEP and the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO). The DQO process was used to identify and define the type, amount, and quality of data needed to determine and implement appropriate corrective actions for each CAS in CAU 544. The DQO process developed for this CAU identified the following expected closure options: (1) investigation and confirmation that no contamination exists above the final action levels (FALs) leading to an NFA declaration, (2) characterization of the nature and extent of contamination leading to closure in place with use restrictions, (3) clean closure by remediation and verification, (4) closure in place with use restrictions with no investigation if CASs are in crater areas that have been determined to be unsafe to enter, or (5) NFA if the mud pit CAS meets the criteria established during the CAUs 530–535 SAFER investigation. The following summarizes the SAFER activities that will support the closure of CAU 544: • Perform visual inspection of all CASs. • Perform site preparation activities (e.g., utilities clearances, construction of temporary site exclusion zones). • Removal of easily managed, nonhazardous, and nonradioactive debris, including vegetation (e.g., tumbleweeds), at various CASs that interfere with sampling, if required to inspect soil surface or collect soil sample. • Collect environmental samples from designated target populations (e.g., mud pits, cellars, stained soil) to confirm or disprove the presence of contaminants of concern (COCs) as necessary to supplement existing information. • If no COCs are present at a

DESIGNING GREENER SOLVENTS

Science.gov (United States)

Computer-aided design of chemicals and chemical mixtures provides a powerful tool to help engineers identify cleaner process designs and more-benign alternatives to toxic industrial solvents. Three software programs are discussed: (1) PARIS II (Program for Assisting the Replaceme...

A systematic methodology for the design of continuous active pharmaceutical ingredient production processes

DEFF Research Database (Denmark)

Cervera Padrell, Albert Emili; Gani, Rafiqul; Kiil, Søren

2011-01-01

Continuous pharmaceutical manufacturing (CPM) has emerged as a powerful technology to obtain higher reaction yields and improved separation efficiencies, potentially leading to simplified process flowsheets, reduced total costs, lower environmental impacts, and safer and more flexible production...... and representation, as well as on how to employ this knowledge for process (re-)design. The aim of this paper is to introduce a methodology that systematically identifies already existing PSE methods and tools which can assist in the design of CPM processes. This methodology has been applied to a process...... for the production of an API developed by H. Lundbeck A/S, demonstrating the mentioned potential benefits that CPM can offer....

Green chemistry for chemical synthesis

OpenAIRE

Li, Chao-Jun; Trost, Barry M.

2008-01-01

Green chemistry for chemical synthesis addresses our future challenges in working with chemical processes and products by inventing novel reactions that can maximize the desired products and minimize by-products, designing new synthetic schemes and apparati that can simplify operations in chemical productions, and seeking greener solvents that are inherently environmentally and ecologically benign.

Green chemistry for chemical synthesis.

Science.gov (United States)

Li, Chao-Jun; Trost, Barry M

2008-09-09

Green chemistry for chemical synthesis addresses our future challenges in working with chemical processes and products by inventing novel reactions that can maximize the desired products and minimize by-products, designing new synthetic schemes and apparati that can simplify operations in chemical productions, and seeking greener solvents that are inherently environmentally and ecologically benign.

Water productivity using SAFER - Simple Algorithm for Evapotranspiration Retrieving in watershed

Directory of Open Access Journals (Sweden)

Daniel N. Coaguila

Full Text Available ABSTRACT The Cabeceira Comprida stream’s watershed, located in Santa Fé do Sul, São Paulo state, has great environmental importance. It is essential for supplying water to the population and generating surpluses for sewage dilution. This study aimed to evaluate the annual performance of the components of water productivity from Landsat-8 images of 2015, using the Simple Algorithm for Evapotranspiration Retrieving (SAFER, calculating the actual evapotranspiration (ETa, biomass (BIO and water productivity (WP. The annual averages of ETa, BIO and WP were 1.03 mm day-1, 36.04 kg ha-1 day-1 and 3.19 kg m-3, respectively. The average annual values of ETa for land use and occupation were 1.40, 1.23, 1.05, 0.97 and 1.08 mm day-1 for the remaining forest (RF, invasive species (IS, pasture (Pa, annual crop (AC and perennial crop (PC, respectively, with BIO of 57.64, 46.10, 36.78, 32.69, 40.03 kg ha-1 day-1 for RF, IS, Pa, AC and PC, respectively, resulting in WP of 3.94, 3.59, 3.25, 3.09, 3.35 kg m-3 for RF, IS, Pa, AC and PC, respectively. The ETa, BIO and WP adjust to the seasonality of the region, and RF and IS stood out with the highest values.

Streamlined Approach for Environmental Restoration (SAFER) Plan for Corrective Action Unit 465: Hydronuclear Nevada National Security Site, Nevada, with ROTC 1, Revision 0

Energy Technology Data Exchange (ETDEWEB)

Patrick Matthews

2011-11-01

description of contaminant migration in the unsaturated zone from the hydronuclear experiments and disposal boreholes. For the potential surface releases, additional information will be obtained by conducting a field investigation before selecting the appropriate corrective action for each CAS component. It is anticipated that results of the flow and transport models, the field investigation, and implementation of the corrective action of closure in place will support a defensible recommendation that no further corrective action is necessary. This will be presented in a closure report that will be prepared and submitted to NDEP for review and approval. The following text summarizes the SAFER activities that will support the closure of CAU 465: (1) Perform site preparation activities (e.g., utilities clearances, and radiological and visual surveys). (2) Move or remove and dispose of debris at various CASs, as required. (3) Collect environmental samples from designated target populations (e.g., stained soil) to confirm or disprove the presence of contaminants of concern as necessary to supplement existing information. (4) Evaluate and analyze existing data to develop conservative flow and transport models to simulate the potential for contaminant migration from the hydronuclear experiments and disposal boreholes to the water table within 1,000 years. (5) Confirm the preferred closure option (closure in place with use restrictions) is sufficient to protect human health and the environment.

Chemical sensors

International Nuclear Information System (INIS)

Hubbard, C.W.; Gordon, R.L.

1987-05-01

The revolution in analytical chemistry promised by recent developments in the field of chemical sensors has potential for significant positive impact on both research and production activities conducted by and for the Department of Energy. Analyses which were, in the past, performed only with a roomful of expensive equipment can now be performed with miniature solid-state electronic devices or small optical probes. Progress in the development of chemical sensors has been rapid, and the field is currently growing at a great rate. In accordance, Pacific Northwest Laboratory initiated a survey of recent literature so that contributors to active programs in research on analytical methods could be made aware of principles and applications of this new technology. This report presents the results of that survey. The sensors discussed here are divided into three types: micro solid-state devices, optical sensors, and piezoelectric crystal devices. The report is divided into three corresponding sections. The first section, ''Micro Solid-State Devices,'' discusses the design, operation, and application of electronic sensors that are produced in much the same way as standard solid-state electronic devices. The second section, ''Optrodes,'' covers the design and operation of chemical sensors that use fiber optics to detect chemically induced changes in optical properties. The final section, ''Piezoelectric Crystal Detectors,'' discusses two types of chemical sensors that depend on the changes in the properties of an oscillating piezoelectric crystal to detect the presence of certain materials. Advantages and disadvantages of each type of sensor are summarized in each section

Off-design performance of a chemical looping combustion (CLC) combined cycle: effects of ambient temperature

Science.gov (United States)

Chi, Jinling; Wang, Bo; Zhang, Shijie; Xiao, Yunhan

2010-02-01

The present work investigates the influence of ambient temperature on the steady-state off-design thermodynamic performance of a chemical looping combustion (CLC) combined cycle. A sensitivity analysis of the CLC reactor system was conducted, which shows that the parameters that influence the temperatures of the CLC reactors most are the flow rate and temperature of air entering the air reactor. For the ambient temperature variation, three off-design control strategies have been assumed and compared: 1) without any Inlet Guide Vane (IGV) control, 2) IGV control to maintain air reactor temperature and 3) IGV control to maintain constant fuel reactor temperature, aside from fuel flow rate adjusting. Results indicate that, compared with the conventional combined cycle, due to the requirement of pressure balance at outlet of the two CLC reactors, CLC combined cycle shows completely different off-design thermodynamic characteristics regardless of the control strategy adopted. For the first control strategy, temperatures of the two CLC reactors both rise obviously as ambient temperature increases. IGV control adopted by the second and the third strategy has the effect to maintain one of the two reactors' temperatures at design condition when ambient temperature is above design point. Compare with the second strategy, the third would induce more severe decrease of efficiency and output power of the CLC combined cycle.

Efficient ex vivo delivery of chemically modified messenger RNA using lipofection and magnetofection.

Science.gov (United States)

Badieyan, Zohreh Sadat; Pasewald, Tamara; Mykhaylyk, Olga; Rudolph, Carsten; Plank, Christian

2017-01-22

Recently, chemically modified mRNA (cmRNA) therapeutics have been the subject of extensive application-oriented research in both academia and industry as a safer alternative for gene and recombinant protein therapies. However, the lack of an efficient delivery system hinders widespread application. Here we used ∼100-nm lipoplexes and magnetic lipoplexes that can protect cmRNA from RNases and efficiently deliver it into muscle and fat tissues as well as to the endothelium of the carotid artery. Establishing magnetofection for ex vivo cmRNA delivery for the first time, we suggest this method for potential enhanced and targeted delivery of cmRNA. This study introduces optimal cmRNA complexes with high ex vivo efficiency as good candidates for further in vivo cmRNA delivery. Copyright © 2016 Elsevier Inc. All rights reserved.

Chemical Pesticides and Human Health: The Urgent Need for a New Concept in Agriculture.

Science.gov (United States)

Nicolopoulou-Stamati, Polyxeni; Maipas, Sotirios; Kotampasi, Chrysanthi; Stamatis, Panagiotis; Hens, Luc

2016-01-01

The industrialization of the agricultural sector has increased the chemical burden on natural ecosystems. Pesticides are agrochemicals used in agricultural lands, public health programs, and urban green areas in order to protect plants and humans from various diseases. However, due to their known ability to cause a large number of negative health and environmental effects, their side effects can be an important environmental health risk factor. The urgent need for a more sustainable and ecological approach has produced many innovative ideas, among them agriculture reforms and food production implementing sustainable practice evolving to food sovereignty. It is more obvious than ever that the society needs the implementation of a new agricultural concept regarding food production, which is safer for man and the environment, and to this end, steps such as the declaration of Nyéléni have been taken.

Do Safer Sex Self-Efficacy, Attitudes toward Condoms, and HIV Transmission Risk Beliefs Differ among Men who have Sex with Men, Heterosexual Men, and Women Living with HIV?

Science.gov (United States)

Widman, Laura; Golin, Carol E.; Grodensky, Catherine A.; Suchindran, Chirayath

2013-01-01

To understand sexual decision-making processes among people living with HIV, we compared safer sex self-efficacy, condom attitudes, sexual beliefs, and rates of unprotected anal or vaginal intercourse with at-risk partners (UAVI-AR) in the past 3 months among 476 people living with HIV: 185 men who have sex with men (MSM), 130 heterosexual men, and 161 heterosexual women. Participants were enrolled in SafeTalk, a randomized, controlled trial of a safer sex intervention. We found 15% of MSM, 9% of heterosexual men, and 12% of heterosexual women engaged in UAVI-AR. Groups did not differ in self-efficacy or sexual attitudes/beliefs. However, the associations between these variables and UAVI-AR varied within groups: greater self-efficacy predicted less UAVI-AR for MSM and women, whereas more positive condom attitudes – but not self-efficacy – predicted less UAVI-AR for heterosexual men. These results suggest HIV prevention programs should tailor materials to different subgroups. PMID:22252475

Safer disclosure of HIV serostatus for women living with HIV who experience or fear violence: a systematic review.

Science.gov (United States)

Kennedy, Caitlin E; Haberlen, Sabina; Amin, Avni; Baggaley, Rachel; Narasimhan, Manjulaa

2015-01-01

Supporting individuals as they disclose their HIV serostatus may lead to a variety of individual and public health benefits. However, many women living with HIV are hesitant to disclose their HIV status due to fear of negative outcomes such as violence, abandonment, relationship dissolution and stigma. We conducted a systematic review of studies evaluating interventions to facilitate safer disclosure of HIV status for women living with HIV who experience or fear violence. Articles, conference abstracts and programme reports were included if they reported post-intervention evaluation results and were published before 1 April 2015. Searching was conducted through electronic databases for peer-reviewed articles and conference abstracts, reviewing websites of relevant organizations for grey literature, hand searching reference lists of included studies and contacting experts. Systematic methods were used for screening and data abstraction, which was conducted in duplicate. Study quality (rigor) was assessed with the Cochrane risk of bias tool. Two interventions met the inclusion criteria: the Safe Homes and Respect for Everyone cluster-randomized trial of combination HIV and intimate partner violence (IPV) services in Rakai, Uganda, and the South Africa HIV/AIDS Antenatal Post-Test Support study individual randomized trial of an enhanced counselling intervention for pregnant women undergoing HIV testing and counselling. Both programmes integrated screening for IPV into HIV testing services and trained counsellors to facilitate discussions about disclosure based on a woman's risk of violence. However, both were implemented as part of multiple-component interventions, making it impossible to isolate the impact of the safer disclosure components. The existing evidence base for interventions to facilitate safe HIV serostatus disclosure for women who experience or fear violence is limited. Development and implementation of new approaches and rigorous evaluation of safe

Research on the Design of Automatic Instrument in Chemical Industry%化工企业中自动化仪表的设计探究

Institute of Scientific and Technical Information of China (English)

鞠伟亚

2015-01-01

The production and operation environment of chemical enterprises is high pressure, high temperature, vacuum and other special environment, but in this special environment, automatic instrument plays a very important role. Therefore, we must do a good job in the design of chemical enterprise automation instrument; improve the stability and reliability of the automation instrument. Through the analysis of common chemical enterprise automatic instrument classification and instrument design selection, this paper describes the chemical enterprise automation instrument design technology, for reference.%化工企业的生产运营环境多是高压、高温、真空等特殊环境,而在这种特殊环境中,自动化仪表发挥着非常重要的作用.因此,必须做好化工企业的自动化仪表设计工作,提高自动化仪表的稳定性和可靠性.通过分析常见的化工企业自动化仪表分类和仪表设计选型,阐述了化工企业自动化仪表设计技术,以供参考.

QUIC: a chemical kinetics code for use with the chemical equilibrium code QUIL

International Nuclear Information System (INIS)

Lunsford, J.L.

1977-10-01

A chemical rate kinetics code QUIC is described, along with a support code RATE. QUIC is designed to allow chemical kinetics calculations on a wide variety of chemical environments while operating in the overlay environment of the chemical equilibrium code QUIL. QUIC depends upon a rate-data library called LIBR. This library is maintained by RATE. RATE enters into the library all reactions in a standardized format. The code QUIC, operating in conjunction with QUIL, is interactive and written to be used from a remote terminal, with paging control provided. Plotted output is also available

Chemical transformations of chlorophyll and its application in the design of a new generation of environmentally safe dyes

International Nuclear Information System (INIS)

Berezin, Boris D; Rumyantseva, Svetlana V; Moryganov, Andrey P; Berezin, Mikhail B

2004-01-01

Chemical transformations of chlorophyll and physicochemical properties of its derivatives are considered. These compounds can be used in the design of a new generation of chlorophyll- and porphyrin-based dyes environmentally more safe than currently used arene dyes and possessing renewable sources of raw materials. The first results on the use of chlorophyll derivatives for dyeing wool, acetate fibres and cotton are reported.

Chemical transformations of chlorophyll and its application in the design of a new generation of environmentally safe dyes

Energy Technology Data Exchange (ETDEWEB)

Berezin, Boris D; Rumyantseva, Svetlana V; Moryganov, Andrey P; Berezin, Mikhail B [Institute of Solution Chemistry, Russian Academy of Sciences, Ivanovo (Russian Federation)

2004-02-28

Chemical transformations of chlorophyll and physicochemical properties of its derivatives are considered. These compounds can be used in the design of a new generation of chlorophyll- and porphyrin-based dyes environmentally more safe than currently used arene dyes and possessing renewable sources of raw materials. The first results on the use of chlorophyll derivatives for dyeing wool, acetate fibres and cotton are reported.

Reliable discrimination of high explosive and chemical/biological artillery using acoustic UGS

Science.gov (United States)

Hohil, Myron E.; Desai, Sachi

2005-10-01

The Army is currently developing acoustic overwatch sensor systems that will provide extended range surveillance, detection, and identification for force protection and tactical security on the battlefield. A network of such sensors remotely deployed in conjunction with a central processing node (or gateway) will provide early warning and assessment of enemy threats, near real-time situational awareness to commanders, and may reduce potential hazards to the soldier. In contrast, the current detection of chemical/biological (CB) agents expelled into a battlefield environment is limited to the response of chemical sensors that must be located within close proximity to the CB agent. Since chemical sensors detect hazardous agents through contact, the sensor range to an airburst is the key-limiting factor in identifying a potential CB weapon attack. The associated sensor reporting latencies must be minimized to give sufficient preparation time to field commanders, who must assess if an attack is about to occur, has occurred, or if occurred, the type of agent that soldiers might be exposed to. The long-range propagation of acoustic blast waves from heavy artillery blasts, which are typical in a battlefield environment, introduces a feature for using acoustics and other disparate sensor technologies for the early detection and identification of CB threats. Employing disparate sensor technologies implies that warning of a potential CB attack can be provided to the solider more rapidly and from a safer distance when compared to that which conventional methods allow. This capability facilitates the necessity of classifying the types of rounds that have burst in a specified region in order to give both warning and provide identification of CB agents found in the area. In this paper, feature extraction methods based on the discrete wavelet transform (DWT) and multiresolution analysis facilitate the development of a robust classification algorithm that affords reliable

Risky decisions despite counter evidence: modeling a culture of safer sexual practices.

Science.gov (United States)

Patel, Vimla L; Yoskowitz, Nicole A; Kaufman, David R; Gutnik, Lily A; Shortliffe, Edward H

2005-01-01

To create a culture of safe practices, we need to understand how and under what conditions the public makes risky decisions about their health. Because risky sexual behaviors are known to be common in young adults, we investigated their decision making regarding sexual activities that could incur a high risk of HIV infection. Sixty young urban adults maintained journals for two weeks and were interviewed regarding condom use and sexual history. We characterized four patterns of condom use behavior: consistent (35.0%), inconsistent (16.7%), consistent to inconsistent (35.0%), and inconsistent to consistent (13.3%). Directionality of reasoning was analyzed in the explanations provided for condom use decisions. The consistent and inconsistent patterns were associated with data-driven heuristic reasoning, where behavior becomes automated and is associated with a high level of confidence in one's judgment. In the other two patterns, the shift in behavior was due to a significant event that influenced a change in directionality to explanation-based reasoning. We discuss these results within the framework of identifying potentially high-risk groups for whom customized intervention strategies (such as computer-based educational programs) can be used to reduce risk, thereby creating a culture of safer sexual practices.

Safer@home—Simulation and training: the study protocol of a qualitative action research design

Science.gov (United States)

Wiig, Siri; Guise, Veslemøy; Anderson, Janet; Storm, Marianne; Lunde Husebø, Anne Marie; Testad, Ingelin; Søyland, Elsa; Moltu, Kirsti L

2014-01-01

Introduction While it is predicted that telecare and other information and communication technology (ICT)-assisted services will have an increasingly important role in future healthcare services, their implementation in practice is complex. For implementation of telecare to be successful and ensure quality of care, sufficient training for staff (healthcare professionals) and service users (patients) is fundamental. Telecare training has been found to have positive effects on attitudes to, sustained use of, and outcomes associated with telecare. However, the potential contribution of training in the adoption, quality and safety of telecare services is an under-investigated research field. The overall aim of this study is to develop and evaluate simulation-based telecare training programmes to aid the use of videophone technology in elderly home care. Research-based training programmes will be designed for healthcare professionals, service users and next of kin, and the study will explore the impact of training on adoption, quality and safety of new telecare services. Methods and analysis The study has a qualitative action research design. The research will be undertaken in close collaboration with a multidisciplinary team consisting of researchers and managers and clinical representatives from healthcare services in two Norwegian municipalities, alongside experts in clinical education and simulation, as well as service user (patient) representatives. The qualitative methods used involve focus group interviews, semistructured interviews, observation and document analysis. To ensure trustworthiness in the data analysis, we will apply member checks and analyst triangulation; in addition to providing contextual and sample description to allow for evaluation of transferability of our results to other contexts and groups. Ethics and dissemination The study is approved by the Norwegian Social Science Data Services. The study is based on voluntary participation and informed

The Role of Diet in Shaping the Chemical Signal Design of Lacertid Lizards.

Science.gov (United States)

Baeckens, Simon; García-Roa, Roberto; Martín, José; Van Damme, Raoul

2017-09-01

Lizards communicate with others via chemical signals, the composition of which may vary among species. Although the selective pressures and constraints affecting chemical signal diversity at the species level remain poorly understood, the possible role of diet has been largely neglected. The chemical signals of many lizards originate from the femoral glands that exude a mixture of semiochemicals, and may be used in a variety of contexts. We analyzed the lipophilic fraction of the glandular secretions of 45 species of lacertid lizard species by gas chromatography/mass spectrometry. The proportions of nine major chemical classes (alcohols, aldehydes, fatty acids, furanones, ketones, steroids, terpenoids, tocopherols and waxy esters), the relative contributions of these different classes ('chemical diversity'), and the total number of different lipophilic compounds ('chemical richness') varied greatly among species. We examined whether interspecific differences in these chemical variables could be coupled to interspecific variation in diet using data from the literature. In addition, we compared chemical signal composition among species that almost never, occasionally, or often eat plant material. We found little support for the hypothesis that the chemical profile of a given species' secretion depends on the type of food consumed. Diet breadth did not correlate with chemical diversity or richness. The amount of plants or ants consumed did not affect the relative contribution of any of the nine major chemical classes to the secretion. Chemical diversity did not differ among lizards with different levels of plant consumption; however, chemical richness was low in species with an exclusive arthropod diet, suggesting that incorporating plants in the diet enables lizards to increase the number of compounds allocated to secretions, likely because a (partly) herbivorous diet allows them to include compounds of plant origin that are unavailable in animal prey. Still, overall

Applications of Axiomatic Design in Developing Nuclear Systems

Energy Technology Data Exchange (ETDEWEB)

Heo, Gyunyoung [Kyung Hee University, Seoul (Korea, Republic of)

2007-10-15

The first step of designing nuclear systems starts with the identification of the top-level requirements given by stake holders and regulatory authorities. A detailed design of structure, system and component then follows. Design is divided into two processes: 'synthesis' and 'analysis.' While synthesis is the process of decision making on parameters, analysis is the process of optimizing the parameters selected. It is known from experience that the mistakes made in the synthesis process, particularly of a conceptual stage, are never completely corrected in the analysis process, which is more serious in designing complex safety critical systems such as nuclear power plants. It should be also noted that we normally believe that synthesis is only driven by engineers' heuristic knowledge. This paper proposes the applications of Axiomatic Design (AD), which is a design management tool as slightly opposed to this conventional view. I hypothesize that the design management using design axioms reduces uncertainty and subjectivity particularly at a conceptual phase so that a safer nuclear system can be developed while reducing cost in view of the system's entire life cycle. I will describe the notion of AD and introduce a few case studies.

THE RELATIONSHIP BETWEEN SOCIAL, POLICY AND PHYSICAL VENUE FEATURES AND SOCIAL COHESION ON CONDOM USE FOR PREGNANCY PREVENTION AMONG SEX WORKERS: A SAFER INDOOR WORK ENVIRONMENT SCALE

Science.gov (United States)

Duff, Putu; Shoveller, Jean; Dobrer, Sabina; Ogilvie, Gina; Montaner, Julio; Chettiar, Jill; Shannon, Kate

2015-01-01

Background This study aims to: report on a newly developed ‘Safer Indoor Work Environmental Scale’ that characterizes the social, policy and physical features of indoor venues and social cohesion; and using this scale, longitudinally evaluate the association between these features on sex workers’ (SWs’) condom use for pregnancy prevention. Methods Drawing on a prospective open cohort of female SWs working in indoor venues, a newly-developed ‘Safer Indoor Work Environment Scale’ was used to build six multivariable models with generalized estimating equations (GEE), to determine the independent effects of social, policy and venue-based features and social cohesion on condom use. Results Of 588 indoor SWs, 63.6% used condoms for pregnancy prevention in the last month. In multivariable GEE analysis, the following venue-based features were significantly correlated with barrier contraceptive use for pregnancy prevention: managerial practices and venue safety policies (Adjusted Odds Ratio (AOR)=1.09; 95% Confidence Interval (95%CI) 1.01–1.17) access to sexual and reproductive health services/supplies (AOR=1.10; 95%CI 1.00–1.20) access to drug harm reduction (AOR=1.13; 95%CI 1.01–1.28), and social cohesion among workers (AOR=1.05; 95%CI 1.03–1.07). Access to security features was marginally associated with condom use (AOR=1.13; 95%CI 0.99–1.29). Conclusion The findings of the current study highlight how work environment and social cohesion among SWs are related to improved condom use. Given global calls for the decriminalization of sex work, and potential legislative reforms in Canada, this study points to the critical need for new institutional arrangements (e.g., legal and regulatory frameworks; labour standards) to support safer sex workplaces. PMID:25678713

The relationship between social, policy and physical venue features and social cohesion on condom use for pregnancy prevention among sex workers: a safer indoor work environment scale.

Science.gov (United States)

Duff, Putu; Shoveller, Jean; Dobrer, Sabina; Ogilvie, Gina; Montaner, Julio; Chettiar, Jill; Shannon, Kate

2015-07-01

This study aims to report on a newly developed Safer Indoor Work Environmental Scale that characterises the social, policy and physical features of indoor venues and social cohesion; and using this scale, longitudinally evaluate the association between these features on sex workers' (SWs') condom use for pregnancy prevention. Drawing on a prospective open cohort of female SWs working in indoor venues, a newly developed Safer Indoor Work Environment Scale was used to build six multivariable models with generalised estimating equations (GEE), to determine the independent effects of social, policy and physical venue-based features and social cohesion on condom use. Of 588 indoor SWs, 63.6% used condoms for pregnancy prevention in the last month. In multivariable GEE analysis, the following venue-based features were significantly correlated with barrier contraceptive use for pregnancy prevention: managerial practices and venue safety policies (adjusted OR (AOR)=1.09; 95% CI 1.01 to 1.17), access to sexual and reproductive health services/supplies (AOR=1.10; 95% CI 1.00 to 1.20), access to drug harm reduction (AOR=1.13; 95% CI 1.01 to 1.28) and social cohesion among workers (AOR=1.05; 95% CI 1.03 to 1.07). Access to security features was marginally associated with condom use (AOR=1.13; 95% CI 0.99 to 1.29). The findings of the current study highlight how work environment and social cohesion among SWs are related to improved condom use. Given global calls for the decriminalisation of sex work, and potential legislative reforms in Canada, this study points to the critical need for new institutional arrangements (eg, legal and regulatory frameworks; labour standards) to support safer sex workplaces. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

A safer, urea-based in situ hybridization method improves detection of gene expression in diverse animal species.

Science.gov (United States)

Sinigaglia, Chiara; Thiel, Daniel; Hejnol, Andreas; Houliston, Evelyn; Leclère, Lucas

2018-02-01

In situ hybridization is a widely employed technique allowing spatial visualization of gene expression in fixed specimens. It has greatly advanced our understanding of biological processes, including developmental regulation. In situ protocols are today routinely followed in numerous laboratories, and although details might change, they all include a hybridization step, where specific antisense RNA or DNA probes anneal to the target nucleic acid sequence. This step is generally carried out at high temperatures and in a denaturing solution, called hybridization buffer, commonly containing 50% (v/v) formamide - a hazardous chemical. When applied to the soft-bodied hydrozoan medusa Clytia hemisphaerica, we found that this traditional hybridization approach was not fully satisfactory, causing extensive deterioration of morphology and tissue texture which compromised our observation and interpretation of results. We thus tested alternative solutions for in situ detection of gene expression and, inspired by optimized protocols for Northern and Southern blot analysis, we substituted the 50% formamide with an equal volume of 8M urea solution in the hybridization buffer. Our new protocol not only yielded better morphologies and tissue consistency, but also notably improved the resolution of the signal, allowing more precise localization of gene expression and reducing aspecific staining associated with problematic areas. Given the improved results and reduced manipulation risks, we tested the urea protocol on other metazoans, two brachiopod species (Novocrania anomala and Terebratalia transversa) and the priapulid worm Priapulus caudatus, obtaining a similar reduction of aspecific probe binding. Overall, substitution of formamide by urea during in situ hybridization offers a safer alternative, potentially of widespread use in research, medical and teaching contexts. We encourage other workers to test this approach on their study organisms, and hope that they will also

Syringaresinol: A Renewable and Safer Alternative to Bisphenol A for Epoxy-Amine Resins.

Science.gov (United States)

Janvier, Marine; Hollande, Louis; Jaufurally, Abdus Samad; Pernes, Miguel; Ménard, Raphaël; Grimaldi, Marina; Beaugrand, Johnny; Balaguer, Patrick; Ducrot, Paul-Henri; Allais, Florent

2017-02-22

A renewable bisepoxide, SYR-EPO, was prepared from syringaresinol, a naturally occurring bisphenol deriving from sinapic acid, by using a chemo-enzymatic synthetic pathway. Estrogenic activity tests revealed no endocrine disruption for syringaresinol. Its glycidylation afforded SYR-EPO with excellent yield and purity. This biobased, safe epoxy precursor was then cured with conventional and renewable diamines for the preparation of epoxy-amine resins. The resulting thermosets were thermally and mechanically characterized. Thermal analyses of these new resins showed excellent thermal stabilities (T d5 % =279-309 °C) and T g ranging from 73 to 126 °C, almost reaching the properties of those obtained with the diglycidylether of bisphenol A (DGEBA), extensively used in the polymer industry (T d5 % =319 °C and T g =150 °C for DGEBA/isophorone diamine resins). Degradation studies in NaOH and HCl aqueous solutions also highlighted the robustness of the syringaresinol-based resins, similar to bisphenol A (BPA). All these results undoubtedly confirmed the potential of syringaresinol as a greener and safer substitute for BPA. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Do Nanoparticle Physico-Chemical Properties and Developmental Exposure Window Influence Nano ZnO Embryotoxicity in Xenopus laevis?

Directory of Open Access Journals (Sweden)

Patrizia Bonfanti

2015-07-01

Full Text Available The growing global production of zinc oxide nanoparticles (ZnONPs suggests a realistic increase in the environmental exposure to such a nanomaterial, making the knowledge of its biological reactivity and its safe-by-design synthesis mandatory. In this study, the embryotoxicity of ZnONPs (1–100 mg/L specifically synthesized for industrial purposes with different sizes, shapes (round, rod and surface coatings (PEG, PVP was tested using the frog embryo teratogenesis assay-Xenopus (FETAX to identify potential target tissues and the most sensitive developmental stages. The ZnONPs did not cause embryolethality, but induced a high incidence of malformations, in particular misfolded gut and abdominal edema. Smaller, round NPs were more effective than the bigger, rod ones, and PEGylation determined a reduction in embryotoxicity. Ingestion appeared to be the most relevant exposure route. Only the embryos exposed from the stomodeum opening showed anatomical and histological lesions to the intestine, mainly referable to a swelling of paracellular spaces among enterocytes. In conclusion, ZnONPs differing in shape and surface coating displayed similar toxicity in X. laevis embryos and shared the same target organ. Nevertheless, we cannot exclude that the physico-chemical characteristics may influence the severity of such effects. Further research efforts are mandatory to ensure the synthesis of safer nano-ZnO-containing products.

Enviro-geotechnical considerations in waste containment system design and analysis

International Nuclear Information System (INIS)

Fang, H.Y.; Daniels, J.L.; Inyang, H.I.

1997-01-01

The effectiveness of waste control facilities hinges on careful evaluation of the overall planning, analysis and design of the entire system prior to construction. At present, most work is focused on the waste controlling system itself, with little attention given to the local environmental factors surrounding the facility sites. Containment materials including geomembranes, geotextiles and clay amended soils have received intense scrutiny. This paper, however, focuses on three relatively important issues relating to the characterization of the surrounding geomedia. Leakage through naturally occurring low-permeability soil layers, shrinkages swelling, cracking and effects of dynamic loads on system components are often responsible for a waste containment breach. In this paper, these mechanisms and their synergistic effects are explained in terms of the particle energy field theory. It is hoped that this additional information may assist the designer to be aware or take precaution to design safer future waste control facilities

Effect of experimental factors on magnetic properties of nickel nanoparticles produced by chemical reduction method using a statistical design

International Nuclear Information System (INIS)

Vaezi, M.R.; Barzgar Vishlaghi, M.; Farzalipour Tabriz, M.; Mohammad Moradi, O.

2015-01-01

Highlights: • Superparamagnetic nickel nanoparticles are synthesized by wet chemical reduction. • Effects of synthesis parameters on magnetic properties are studied. • Central composite experimental design is used for building an empirical model. • Solvents ratio was more influential than reactants mixing rate. - Abstract: Nickel nanoparticles were synthesized by chemical reduction method in the absence of any surface capping agent. The effect of reactants mixing rate and the volume ratio of methanol/ethanol as solvent on the morphology and magnetic properties of nickel nanoparticles were studied by design of experiment using central composite design. X-ray diffraction (XRD) technique and Transmission Electron Microscopy (TEM) were utilized to characterize the synthesized nanoparticles. Size distribution of particles was studied by Dynamic Light Scattering (DLS) technique and magnetic properties of produced nanoparticles were investigated by Vibrating Sample Magnetometer (VSM) apparatus. The results showed that the magnetic properties of nickel nanoparticles were more influenced by volume ratio of methanol/ethanol than the reactants mixing rate. Super-paramagnetic nickel nanoparticles with size range between 20 and 50 nm were achieved when solvent was pure methanol and the reactants mixing rate was kept at 70 ml/h. But addition of more ethanol to precursor solvent leads to the formation of larger particles with broader size distribution and weak ferromagnetic or super-paramagnetic behavior

Presidential Green Chemistry Challenge: 2002 Designing Greener Chemicals Award

Science.gov (United States)

Presidential Green Chemistry Challenge 2002 award winner, Chemical Specialties, developed an alkaline copper quaternary wood preservative to replace chromated copper arsenate preservative phased out due to risk to children.

In Silico Prediction of Chemical Toxicity for Drug Design Using Machine Learning Methods and Structural Alerts

Science.gov (United States)

Yang, Hongbin; Sun, Lixia; Li, Weihua; Liu, Guixia; Tang, Yun

2018-02-01

For a drug, safety is always the most important issue, including a variety of toxicities and adverse drug effects, which should be evaluated in preclinical and clinical trial phases. This review article at first simply introduced the computational methods used in prediction of chemical toxicity for drug design, including machine learning methods and structural alerts. Machine learning methods have been widely applied in qualitative classification and quantitative regression studies, while structural alerts can be regarded as a complementary tool for lead optimization. The emphasis of this article was put on the recent progress of predictive models built for various toxicities. Available databases and web servers were also provided. Though the methods and models are very helpful for drug design, there are still some challenges and limitations to be improved for drug safety assessment in the future.

In Silico Prediction of Chemical Toxicity for Drug Design Using Machine Learning Methods and Structural Alerts

Directory of Open Access Journals (Sweden)

Hongbin Yang

2018-02-01

Full Text Available During drug development, safety is always the most important issue, including a variety of toxicities and adverse drug effects, which should be evaluated in preclinical and clinical trial phases. This review article at first simply introduced the computational methods used in prediction of chemical toxicity for drug design, including machine learning methods and structural alerts. Machine learning methods have been widely applied in qualitative classification and quantitative regression studies, while structural alerts can be regarded as a complementary tool for lead optimization. The emphasis of this article was put on the recent progress of predictive models built for various toxicities. Available databases and web servers were also provided. Though the methods and models are very helpful for drug design, there are still some challenges and limitations to be improved for drug safety assessment in the future.

In Silico Prediction of Chemical Toxicity for Drug Design Using Machine Learning Methods and Structural Alerts.

Science.gov (United States)

Yang, Hongbin; Sun, Lixia; Li, Weihua; Liu, Guixia; Tang, Yun

2018-01-01

During drug development, safety is always the most important issue, including a variety of toxicities and adverse drug effects, which should be evaluated in preclinical and clinical trial phases. This review article at first simply introduced the computational methods used in prediction of chemical toxicity for drug design, including machine learning methods and structural alerts. Machine learning methods have been widely applied in qualitative classification and quantitative regression studies, while structural alerts can be regarded as a complementary tool for lead optimization. The emphasis of this article was put on the recent progress of predictive models built for various toxicities. Available databases and web servers were also provided. Though the methods and models are very helpful for drug design, there are still some challenges and limitations to be improved for drug safety assessment in the future.

Introduction to chemical reaction engineering

International Nuclear Information System (INIS)

Kim, Yeong Geol

1990-10-01

This deals with chemical reaction engineering with thirteen chapters. The contents of this book are introduction on reaction engineering, chemical kinetics, thermodynamics and chemical reaction, abnormal reactor, non-isothermal reactor, nonideal reactor, catalysis in nonuniform system, diffusion and reaction in porosity catalyst, design catalyst heterogeneous reactor in solid bed, a high molecule polymerization, bio reaction engineering, reaction engineering in material process, control multi-variable reactor process using digital computer.

Chemical pesticides and human health: The urgent need for a new concept in agriculture

Directory of Open Access Journals (Sweden)

Polyxeni Nicolopoulou-Stamati

2016-07-01

Full Text Available The industrialization of the agricultural sector has increased the chemical burden on natural ecosystems. Pesticides are agrochemicals used in agricultural lands, public health programs and urban green areas in order to protect plants and humans from various diseases. However, due to their known ability to cause a large number of negative health and environmental effects, their side effects can be an important environmental health risk factor. The urgent need for a more sustainable and ecological approach has produced many innovative ideas, among them agriculture reforms and food production implementing sustainable practice evolving to food sovereignty. It is more obvious than ever that the society needs the implementation of a new agricultural concept regarding food production which is safer for man and the environment, and to this end, steps such as the declaration of Nyéléni have been taken.

Metal-organic frameworks for the removal of toxic industrial chemicals and chemical warfare agents.

Science.gov (United States)

Bobbitt, N Scott; Mendonca, Matthew L; Howarth, Ashlee J; Islamoglu, Timur; Hupp, Joseph T; Farha, Omar K; Snurr, Randall Q

2017-06-06

Owing to the vast diversity of linkers, nodes, and topologies, metal-organic frameworks can be tailored for specific tasks, such as chemical separations or catalysis. Accordingly, these materials have attracted significant interest for capture and/or detoxification of toxic industrial chemicals and chemical warfare agents. In this paper, we review recent experimental and computational work pertaining to the capture of several industrially-relevant toxic chemicals, including NH 3 , SO 2 , NO 2 , H 2 S, and some volatile organic compounds, with particular emphasis on the challenging issue of designing materials that selectively adsorb these chemicals in the presence of water. We also examine recent research on the capture and catalytic degradation of chemical warfare agents such as sarin and sulfur mustard using metal-organic frameworks.

Chemical and non-chemical stressors affecting childhood obesity: a systematic scoping review.

Science.gov (United States)

Lichtveld, Kim; Thomas, Kent; Tulve, Nicolle S

2018-01-01

Childhood obesity in the United States has doubled over the last three decades and currently affects 17% of children and adolescents. While much research has focused on individual behaviors impacting obesity, little research has emphasized the complex interactions of numerous chemical and non-chemical stressors found in a child's environment and how these interactions affect a child's health and well-being. The objectives of this systematic scoping review were to (1) identify potential chemical stressors in the context of non-chemical stressors that impact childhood obesity; and, (2) summarize our observations for chemical and non-chemical stressors in regards to child-specific environments within a community setting. A review was conducted to identify chemical and non-chemical stressors related to childhood obesity for the childhood life stages ranging from prenatal to adolescence. Stressors were identified and grouped into domains: individual behaviors, family/household behaviors, community stressors, and chemical exposures. Stressors were related to the child and the child's everyday environments and used to characterize child health and well-being. This review suggests that the interactions of chemical and non-chemical stressors are important for understanding a child's overall health and well-being. By considering these relationships, the exposure science research community can better design and implement strategies to reduce childhood obesity.

The physics design of accelerator-driven transmutation systems

International Nuclear Information System (INIS)

Venneri, F.

1995-01-01

Nuclear systems under study in the Los Alamos Accelerator-Driven Transmutation Technology program (ADTT) will allow the destruction of nuclear spent fuel and weapons-return plutonium, as well as the production of nuclear energy from the thorium cycle, without a long-lived radioactive waste stream. The subcritical systems proposed represent a radical departure from traditional nuclear concepts (reactors), yet the actual implementation of ADTT systems is based on modest extrapolations of existing technology. These systems strive to keep the best that the nuclear technology has developed over the years, within a sensible conservative design envelope and eventually manage to offer a safer, less expensive and more environmentally sound approach to nuclear power

Discriminative Chemical Patterns: Automatic and Interactive Design.

Science.gov (United States)

Bietz, Stefan; Schomburg, Karen T; Hilbig, Matthias; Rarey, Matthias

2015-08-24

The classification of molecules with respect to their inhibiting, activating, or toxicological potential constitutes a central aspect in the field of cheminformatics. Often, a discriminative feature is needed to distinguish two different molecule sets. Besides physicochemical properties, substructures and chemical patterns belong to the descriptors most frequently applied for this purpose. As a commonly used example of this descriptor class, SMARTS strings represent a powerful concept for the representation and processing of abstract chemical patterns. While their usage facilitates a convenient way to apply previously derived classification rules on new molecule sets, the manual generation of useful SMARTS patterns remains a complex and time-consuming process. Here, we introduce SMARTSminer, a new algorithm for the automatic derivation of discriminative SMARTS patterns from preclassified molecule sets. Based on a specially adapted subgraph mining algorithm, SMARTSminer identifies structural features that are frequent in only one of the given molecule classes. In comparison to elemental substructures, it also supports the consideration of general and specific SMARTS features. Furthermore, SMARTSminer is integrated into an interactive pattern editor named SMARTSeditor. This allows for an intuitive visualization on the basis of the SMARTSviewer concept as well as interactive adaption and further improvement of the generated patterns. Additionally, a new molecular matching feature provides an immediate feedback on a pattern's matching behavior across the molecule sets. We demonstrate the utility of the SMARTSminer functionality and its integration into the SMARTSeditor software in several different classification scenarios.

Advances in passive cooling design and performance analysis

International Nuclear Information System (INIS)

Woodcock, J.

1994-01-01

The Third International Conference on Containment Design and Operation continues the trend of rapidly extending the state of the art in containment methodology, joining other conferences, OECD-sponsored International Standard Problem exercises, and vendor licensing submittals. Methodology developed for use on plants with passive features is under increasing scrutiny for advanced designs, since the passive features are often the only deviation from existing operating base of the past 30 years of commercial nuclear power. This session, 'Containment Passive Safety Systems Design and Operation,' offers papers on a wide range of topics, with authors from six organizations from around the world, dealing with general passive containments, Westinghouse AP600, large (>1400 MWe) passive plants, and the AECL advanced CANDU reactor. This level and variety of participation underscores the high interest and accelerated methods development associated with advanced passive containment heat removal. The papers presented in this session demonstrate that significant contributions are being made to the advancement of technology necessary for building a new generation of safer, more economical nuclear plants. (author)

Biomimetics in the design of a robotic exoskeleton for upper limb therapy

Science.gov (United States)

Baniqued, Paul Dominick E.; Dungao, Jade R.; Manguerra, Michael V.; Baldovino, Renann G.; Abad, Alexander C.; Bugtai, Nilo T.

2018-02-01

Current methodologies in designing robotic exoskeletons for upper limb therapy simplify the complex requirements of the human anatomy. As a result, such devices tend to compromise safety and biocompatibility with the intended user. However, a new design methodology uses biological analogues as inspiration to address these technical issues. This approach follows that of biomimetics, a design principle that uses the extraction and transfer of useful information from natural morphologies and processes to solve technical design issues. In this study, a biomimetic approach in the design of a 5-degree-of-freedom robotic exoskeleton for upper limb therapy was performed. A review of biomimetics was first discussed along with its current contribution to the design of rehabilitation robots. With a proposed methodological framework, the design for an upper limb robotic exoskeleton was generated using CATIA software. The design was inspired by the morphology of the bones and the muscle force transmission of the upper limbs. Finally, a full design assembly presented had integrated features extracted from the biological analogue. The successful execution of a biomimetic design methodology made a case in providing safer and more biocompatible robots for rehabilitation.

A design for a reusable water-based spacecraft known as the spacecoach

CERN Document Server

McConnell, Brian

2016-01-01

 Based on components already in existence, this manual details a reference design for an interplanetary spacecraft that is simple, durable, fully reusable and comprised mostly of water. Using such an accessible material leads to a spacecraft architecture that is radically simpler, safer and cheaper than conventional capsule based designs. If developed, the potential affordability of the design will substantially open all of the inner solar system to human exploration. A spacecraft that is comprised mostly of water will be much more like a living cell or a terrarium than a conventional rocket and capsule design. It will use water for many purposes before it is superheated in electric engines for propulsion, purposes which include radiation shielding, heat management, basic life support, crew consumption and comfort. The authors coined the term "spacecoaches" to describe them, as an allusion to the Prairie Schooners of the Old West, which were simple, rugged, and could live off the land.

Design of an ultraprecision computerized numerical control chemical mechanical polishing machine and its implementation

Science.gov (United States)

Zhang, Chupeng; Zhao, Huiying; Zhu, Xueliang; Zhao, Shijie; Jiang, Chunye

2018-01-01

The chemical mechanical polishing (CMP) is a key process during the machining route of plane optics. To improve the polishing efficiency and accuracy, a CMP model and machine tool were developed. Based on the Preston equation and the axial run-out error measurement results of the m circles on the tin plate, a CMP model that could simulate the material removal at any point on the workpiece was presented. An analysis of the model indicated that lower axial run-out error led to lower material removal but better polishing efficiency and accuracy. Based on this conclusion, the CMP machine was designed, and the ultraprecision gas hydrostatic guideway and rotary table as well as the Siemens 840Dsl numerical control system were incorporated in the CMP machine. To verify the design principles of machine, a series of detection and machining experiments were conducted. The LK-G5000 laser sensor was employed for detecting the straightness error of the gas hydrostatic guideway and the axial run-out error of the gas hydrostatic rotary table. A 300-mm-diameter optic was chosen for the surface profile machining experiments performed to determine the CMP efficiency and accuracy.

Testing of tunnel support : dynamic load testing of rockbolt elements to provide data for safer support design.

CSIR Research Space (South Africa)

Ortlepp, WD

1998-06-01

Full Text Available This research report discusses the development of a realistic and controllable method of testing support tendons dynamically, which has been achieved in this research project, offers a new and fresh opportunity for improving the design methodology...

Designing chemical soil characterization programs for mixed waste sites

International Nuclear Information System (INIS)

Meyers, K.A. Jr.

1989-01-01

The Weldon Spring Site Remedial Action Project is a remedial action effort funded by the U.S. Department of Energy. The Weldon Spring Site, a former uranium processing facility, is located in east-central Missouri on a portion of a former ordnance works facility which produced trinitrotoluene during World War II. As a result of both uranium and ordnance production, the soils have become both radiologically and chemically contaminated. As a part of site characterization efforts in support of the environmental documentation process, a chemical soil characterization program was developed. This program consisted of biased and unbiased sampling program which maximized areal coverage, provided a statistically sound data base and maintained cost effectiveness. This paper discusses how the general rationale and processes used at the Weldon Spring Site can be applied to other mixed and hazardous waste sites

Endocrine active chemicals, pharmaceuticals, and other chemicals of concern in surface water, wastewater-treatment plant effluent, and bed sediment, and biological characteristics in selected streams, Minnesota-design, methods, and data, 2009

Science.gov (United States)

Lee, Kathy E.; Langer, Susan K.; Barber, Larry B.; Writer, Jeff H.; Ferrey, Mark L.; Schoenfuss, Heiko L.; Furlong, Edward T.; Foreman, William T.; Gray, James L.; ReVello, Rhiannon C.; Martinovic, Dalma; Woodruff, Olivia R.; Keefe, Steffanie H.; Brown, Greg K.; Taylor, Howard E.; Ferrer, Imma; Thurman, E. Michael

2011-01-01

This report presents the study design, environmental data, and quality-assurance data for an integrated chemical and biological study of selected streams or lakes that receive wastewater-treatment plant effluent in Minnesota. This study was a cooperative effort of the U.S. Geological Survey, the Minnesota Pollution Control Agency, St. Cloud State University, the University of St. Thomas, and the University of Colorado. The objective of the study was to identify distribution patterns of endocrine active chemicals, pharmaceuticals, and other organic and inorganic chemicals of concern indicative of wastewater effluent, and to identify biological characteristics of estrogenicity and fish responses in the same streams. The U.S. Geological Survey collected and analyzed water, bed-sediment, and quality-assurance samples, and measured or recorded streamflow once at each sampling location from September through November 2009. Sampling locations included surface water and wastewater-treatment plant effluent. Twenty-five wastewater-treatment plants were selected to include continuous flow and periodic release facilities with differing processing steps (activated sludge or trickling filters) and plant design flows ranging from 0.002 to 10.9 cubic meters per second (0.04 to 251 million gallons per day) throughout Minnesota in varying land-use settings. Water samples were collected from the treated effluent of the 25 wastewater-treatment plants and at one point upstream from and one point downstream from wastewater-treatment plant effluent discharges. Bed-sediment samples also were collected at each of the stream or lake locations. Water samples were analyzed for major ions, nutrients, trace elements, pharmaceuticals, phytoestrogens and pharmaceuticals, alkylphenols and other neutral organic chemicals, carboxylic acids, and steroidal hormones. A subset (25 samples) of the bed-sediment samples were analyzed for carbon, wastewater-indicator chemicals, and steroidal hormones; the

RTL2RTL Formal Equivalence: Boosting the Design Confidence

Directory of Open Access Journals (Sweden)

M V Achutha Kiran Kumar

2014-07-01

Full Text Available Increasing design complexity driven by feature and performance requirements and the Time to Market (TTM constraints force a faster design and validation closure. This in turn enforces novel ways of identifying and debugging behavioral inconsistencies early in the design cycle. Addition of incremental features and timing fixes may alter the legacy design behavior and would inadvertently result in undesirable bugs. The most common method of verifying the correctness of the changed design is to run a dynamic regression test suite before and after the intended changes and compare the results, a method which is not exhaustive. Modern Formal Verification (FV techniques involving new methods of proving Sequential Hardware Equivalence enabled a new set of solutions for the given problem, with complete coverage guarantee. Formal Equivalence can be applied for proving functional integrity after design changes resulting from a wide variety of reasons, ranging from simple pipeline optimizations to complex logic redistributions. We present here our experience of successfully applying the RTL to RTL (RTL2RTL Formal Verification across a wide spectrum of problems on a Graphics design. The RTL2RTL FV enabled checking the design sanity in a very short time, thus enabling faster and safer design churn. The techniques presented in this paper are applicable to any complex hardware design.

Should we consider steps with variable height for a safer stair negotiation in older adults?

Science.gov (United States)

Kunzler, Marcos R; da Rocha, Emmanuel S; Dos Santos, Christielen S; Ceccon, Fernando G; Priario, Liver A; Carpes, Felipe P

2018-01-01

Effects of exercise on foot clearances are important. In older adults variations in foot clearances during walking may lead to a fall, but there is a lack of information concerning stair negotiation in older adults. Whether a condition of post exercise changes foot clearances between steps of a staircase in older adults still unknown. To determine differences in clearances when older adults negotiate different steps of a staircase before and after a session of aerobic exercise. Kinematics data from 30 older adults were acquired and the toe and heel clearances were determined for each step. Clearances were compared between the steps. Smaller clearances were found at the highest step during ascending and descending, which was not changed by exercise. Smaller clearances suggest higher risk of tripping at the top of the staircase, regardless of exercise. A smaller step at the top of a short flight of stairs could reduce chances of tripping in older adults. It suggests that steps with variable height could make stair negotiation safer in older adults. This hypothesis should be tested in further studies.

Mini-projects in Chemical Engineering Laboratory

Directory of Open Access Journals (Sweden)

Angeles Cancela

2013-03-01

Full Text Available Chemical engineering laboratory practices based in mini-projects were design and applied the students of forestry engineering in chemical subject. This way of practice reveals a more cooperative learning and a different style of experimentation. The stated goal was to design practices that motivate students and to enable them to develop different skills, including cross teamwork and communication. This paper describes how these practices were developed and the advantages and disadvantages of using this methodology of teaching.

Development of Computer Aided Modelling Templates for Model Re-use in Chemical and Biochemical Process and Product Design: Importand export of models

DEFF Research Database (Denmark)

Fedorova, Marina; Tolksdorf, Gregor; Fillinger, Sandra

2015-01-01

been established, in order to provide a wider range of modelling capabilities. Through this link, developed models can be exported/imported to/from other modelling-simulation software environments to allow model reusability in chemical and biochemical product and process design. The use of this link...

Accidental hazardous material releases with human impacts in the United States: exploration of geographical distribution and temporal trends.

Science.gov (United States)

Sengul, Hatice; Santella, Nicholas; Steinberg, Laura J; Chermak, Christina

2010-09-01

To investigate the circumstances and geographic and temporal distributions of hazardous material releases and resulting human impacts in the United States. Releases with fatalities, injuries, and evacuations were identified from reports to the National Response Center between 1990 and 2008, correcting for data quality issues identified in previous studies. From more than 550,000 reports, 861 deaths, 16,348 injuries and 741,427 evacuations were identified. Injuries from releases of chemicals at fixed facilities and natural gas from pipelines have decreased whereas evacuations from petroleum releases at fixed facilities have increased. Results confirm recent advances in chemical and pipeline safety and suggest directions for further improvement including targeted training and inspections and adoption of inherently safer design principles.

Quantitative design of emergency monitoring network for river chemical spills based on discrete entropy theory.

Science.gov (United States)

Shi, Bin; Jiang, Jiping; Sivakumar, Bellie; Zheng, Yi; Wang, Peng

2018-05-01

Field monitoring strategy is critical for disaster preparedness and watershed emergency environmental management. However, development of such is also highly challenging. Despite the efforts and progress thus far, no definitive guidelines or solutions are available worldwide for quantitatively designing a monitoring network in response to river chemical spill incidents, except general rules based on administrative divisions or arbitrary interpolation on routine monitoring sections. To address this gap, a novel framework for spatial-temporal network design was proposed in this study. The framework combines contaminant transport modelling with discrete entropy theory and spectral analysis. The water quality model was applied to forecast the spatio-temporal distribution of contaminant after spills and then corresponding information transfer indexes (ITIs) and Fourier approximation periodic functions were estimated as critical measures for setting sampling locations and times. The results indicate that the framework can produce scientific preparedness plans of emergency monitoring based on scenario analysis of spill risks as well as rapid design as soon as the incident happened but not prepared. The framework was applied to a hypothetical spill case based on tracer experiment and a real nitrobenzene spill incident case to demonstrate its suitability and effectiveness. The newly-designed temporal-spatial monitoring network captured major pollution information at relatively low costs. It showed obvious benefits for follow-up early-warning and treatment as well as for aftermath recovery and assessment. The underlying drivers of ITIs as well as the limitations and uncertainty of the approach were analyzed based on the case studies. Comparison with existing monitoring network design approaches, management implications, and generalized applicability were also discussed. Copyright © 2018 Elsevier Ltd. All rights reserved.

Chemical Product Design: A new challenge of applied thermodynamics

DEFF Research Database (Denmark)

Abildskov, Jens; Kontogeorgis, Georgios

2004-01-01

, and then to outline some specific examples from our research activities in the area of thermodynamics for chemical products. The examples cover rather diverse areas such as interrelation between thermodynamic and engineering properties in detergents (surfactants), paint thermodynamics and the development of models...

A Comprehensive Framework for Surfactant Selection and Design for Emulsion Based Chemical Product Design

DEFF Research Database (Denmark)

Mattei, Michele; Kontogeorgis, Georgios; Gani, Rafiqul

2014-01-01

The manufacture of emulsified products is of increasing interest in the consumer oriented chemical indus-try. Several cosmetic, house-hold and pharmaceutical products are in the emulsified form when soldand/or they are expected to form an emulsion when used. Therefore, there is a need...

Vicher: A Virtual Reality Based Educational Module for Chemical Reaction Engineering.

Science.gov (United States)

Bell, John T.; Fogler, H. Scott

1996-01-01

A virtual reality application for undergraduate chemical kinetics and reactor design education, Vicher (Virtual Chemical Reaction Model) was originally designed to simulate a portion of a modern chemical plant. Vicher now consists of two programs: Vicher I that models catalyst deactivation and Vicher II that models nonisothermal effects in…

The Impact of Novel Assessment Methodologies in Toxicology on Green Chemistry and Chemical Alternatives.

Science.gov (United States)

Rusyn, Ivan; Greene, Nigel

2018-02-01

The field of experimental toxicology is rapidly advancing by incorporating novel techniques and methods that provide a much more granular view into the mechanisms of potential adverse effects of chemical exposures on human health. The data from various in vitro assays and computational models are useful not only for increasing confidence in hazard and risk decisions, but also are enabling better, faster and cheaper assessment of a greater number of compounds, mixtures, and complex products. This is of special value to the field of green chemistry where design of new materials or alternative uses of existing ones is driven, at least in part, by considerations of safety. This article reviews the state of the science and decision-making in scenarios when little to no data may be available to draw conclusions about which choice in green chemistry is "safer." It is clear that there is no "one size fits all" solution and multiple data streams need to be weighed in making a decision. Moreover, the overall level of familiarity of the decision-makers and scientists alike with new assessment methodologies, their validity, value and limitations is evolving. Thus, while the "impact" of the new developments in toxicology on the field of green chemistry is great already, it is premature to conclude that the data from new assessment methodologies have been widely accepted yet. © The Author 2017. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Chemically Designed Metallic/Insulating Hybrid Nanostructures with Silver Nanocrystals for Highly Sensitive Wearable Pressure Sensors.

Science.gov (United States)

Kim, Haneun; Lee, Seung-Wook; Joh, Hyungmok; Seong, Mingi; Lee, Woo Seok; Kang, Min Su; Pyo, Jun Beom; Oh, Soong Ju

2018-01-10

With the increase in interest in wearable tactile pressure sensors for e-skin, researches to make nanostructures to achieve high sensitivity have been actively conducted. However, limitations such as complex fabrication processes using expensive equipment still exist. Herein, simple lithography-free techniques to develop pyramid-like metal/insulator hybrid nanostructures utilizing nanocrystals (NCs) are demonstrated. Ligand-exchanged and unexchanged silver NC thin films are used as metallic and insulating components, respectively. The interfaces of each NC layer are chemically engineered to create discontinuous insulating layers, i.e., spacers for improved sensitivity, and eventually to realize fully solution-processed pressure sensors. Device performance analysis with structural, chemical, and electronic characterization and conductive atomic force microscopy study reveals that hybrid nanostructure based pressure sensor shows an enhanced sensitivity of higher than 500 kPa -1 , reliability, and low power consumption with a wide range of pressure sensing. Nano-/micro-hierarchical structures are also designed by combining hybrid nanostructures with conventional microstructures, exhibiting further enhanced sensing range and achieving a record sensitivity of 2.72 × 10 4 kPa -1 . Finally, all-solution-processed pressure sensor arrays with high pixel density, capable of detecting delicate signals with high spatial selectivity much better than the human tactile threshold, are introduced.

Investigations on the optimum design of chemical addition system for nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Chang, Byong Hoon [Junior College of Inchon, Inchon (Korea, Republic of); Chung, Chang Kyu; Choi, Han Rim; Kim, Eun Kee; Ro, Tae Sun [Korea Power Engineering Company, Inc. Taejon (Korea, Republic of)

1998-12-31

Mixing characteristics of the chemical additives in the chemical injection tank of the chemical and volume control system(CVCS) were investigated for the Yonggwang Nuclear units 5 and 6. Numerical calculations were performed with a low-Reynolds number turbulence model. Studies were also conducted for the injection tank with a disk located at 1/4H, 2/4H, and 3/4H from the inlet in order to see the effect in the enhancement of chemical mixing. Results show that the optimum arrangement is to locate a disk close to the inlet. 10 refs., 4 figs. (Author)

Investigations on the optimum design of chemical addition system for nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Chang, Byong Hoon [Junior College of Inchon, Inchon (Korea, Republic of); Chung, Chang Kyu; Choi, Han Rim; Kim, Eun Kee; Ro, Tae Sun [Korea Power Engineering Company, Inc. Taejon (Korea, Republic of)

1997-12-31

Mixing characteristics of the chemical additives in the chemical injection tank of the chemical and volume control system(CVCS) were investigated for the Yonggwang Nuclear units 5 and 6. Numerical calculations were performed with a low-Reynolds number turbulence model. Studies were also conducted for the injection tank with a disk located at 1/4H, 2/4H, and 3/4H from the inlet in order to see the effect in the enhancement of chemical mixing. Results show that the optimum arrangement is to locate a disk close to the inlet. 10 refs., 4 figs. (Author)

The Tactile Ethics of Soft Robotics: Designing Wisely for Human-Robot Interaction.

Science.gov (United States)

Arnold, Thomas; Scheutz, Matthias

2017-06-01

Soft robots promise an exciting design trajectory in the field of robotics and human-robot interaction (HRI), promising more adaptive, resilient movement within environments as well as a safer, more sensitive interface for the objects or agents the robot encounters. In particular, tactile HRI is a critical dimension for designers to consider, especially given the onrush of assistive and companion robots into our society. In this article, we propose to surface an important set of ethical challenges for the field of soft robotics to meet. Tactile HRI strongly suggests that soft-bodied robots balance tactile engagement against emotional manipulation, model intimacy on the bonding with a tool not with a person, and deflect users from personally and socially destructive behavior the soft bodies and surfaces could normally entice.

Recent advances in design and fabrication of upconversion nanoparticles and their safe theranostic applications.

Science.gov (United States)

Gu, Zhanjun; Yan, Liang; Tian, Gan; Li, Shoujian; Chai, Zhifang; Zhao, Yuliang

2013-07-26

Lanthanide (Ln) doped upconversion nanoparticles (UCNPs) have attracted enormous attention in the recent years due to their unique upconversion luminescent properties that enable the conversion of low-energy photons (near infrared photons) into high-energy photons (visible to ultraviolet photons) via the multiphoton processes. This feature makes them ideal for bioimaging applications with attractive advantages such as no autofluorescence from biotissues and a large penetration depth. In addition, by incorporating advanced features, such as specific targeting, multimodality imaging and therapeutic delivery, the application of UCNPs has been dramatically expanded. In this review, we first summarize the recent developments in the fabrication strategies of UCNPs with the desired size, enhanced and tunable upconversion luminescence, as well as the combined multifunctionality. We then discuss the chemical methods applied for UCNPs surface functionalization to make these UCNPs biocompatible and water-soluble, and further highlight some representative examples of using UCNPs for in vivo bioimaging, NIR-triggered drug/gene delivery applications and photodynamic therapy. In the perspectives, we discuss the need of systematically nanotoxicology data for rational designs of UCNPs materials, their surface chemistry in safer biomedical applications. The UCNPs can actually provide an ideal multifunctionalized platform for solutions to many key issues in the front of medical sciences such as theranostics, individualized therapeutics, multimodality medicine, etc. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Safety culture and the 5 steps to safer surgery: an intervention study.

Science.gov (United States)

Hill, M R; Roberts, M J; Alderson, M L; Gale, T C E

2015-06-01

Improvements in safety culture have been postulated as one of the mechanisms underlying the association between the introduction of the World Health Organisation (WHO) Surgical Safety Checklist with perioperative briefings and debriefings, and enhanced patient outcomes. The 5 Steps to Safer Surgery (5SSS) incorporates pre-list briefings, the three steps of the WHO Surgical Safety Checklist (SSC) and post-list debriefings in one framework. We aimed to identify any changes in safety culture associated with the introduction of the 5SSS in orthopaedic operating theatres. We assessed the safety culture in the elective orthopaedic theatres of a large UK teaching hospital before and after introduction of the 5SSS using a modified version of the Safety Attitude Questionnaire - Operating Room (SAQ-OR). Primary outcome measures were pre-post intervention changes in the six safety culture domains of the SAQ-OR. We also analysed changes in responses to two items regarding perioperative briefings. The SAQ-OR survey response rate was 80% (60/75) at baseline and 74% (53/72) one yr later. There were significant improvements in both the reported frequency (Pculture domain scores (Working Conditions, Perceptions of Management, Job Satisfaction, Safety Climate and Teamwork Climate) of the SAQ-OR (Pculture of elective orthopaedic operating theatres. © The Author 2015. Published by Oxford University Press on behalf of the British Journal of Anaesthesia. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The nexus of nursing leadership and a culture of safer patient care.

Science.gov (United States)

Murray, Melanie; Sundin, Deborah; Cope, Vicki

2018-03-01

To explore the connection between +6 nursing leadership and enhanced patient safety. Critical reports from the Institute of Medicine in 1999 and Francis QC report of 2013 indicate that healthcare organisations, inclusive of nursing leadership, were remiss or inconsistent in fostering a culture of safety. The factors required to foster organisational safety culture include supportive leadership, effective communication, an orientation programme and ongoing training, appropriate staffing, open communication regarding errors, compliance to policy and procedure, and environmental safety and security. As nurses have the highest patient interaction, and leadership is discernible at all levels of nursing, nurse leaders are the nexus to influencing organisational culture towards safer practices. The position of this article was to explore the need to form a nexus between safety culture and leadership for the provision of safe care. Safety is crucial in health care for patient safety and patient outcomes. A culture of safety has been exposed as a major influence on patient safety practices, heavily influenced by leadership behaviours. The relationship between leadership and safety plays a pivotal role in creating positive safety outcomes for patient care. A safe culture is one nurtured by effective leadership. Patient safety is the responsibility of all healthcare workers, from the highest executive to the bedside nurse, thus effective leadership throughout all levels is essential in engaging staff to provide high quality care for the best possible patient outcomes. © 2017 John Wiley & Sons Ltd.

Selection and design of solvents

DEFF Research Database (Denmark)

Gani, Rafiqul

and design of solvents will be presented together with application examples. The selection problem is defined as finding known chemicals that match the desired functions of a solvent for a specified set of applications. The design problem is defined as finding the molecular structure (or mixture of molecules....... With increasing interest on issues such as waste, sustainability, environmental impact and green chemistry, the selection and design of solvents have become important problems that need to be addressed during chemical product-process design and development. Systematic methods and tools suitable for selection......) that match the desired functions of a solvent for a specified set of applications. Use of organic chemicals and ionic liquids as solvents will be covered....

Rational Design of Mixed-Metal Oxides for Chemical Looping Combustion of Coal via Coupled Computational-Experimental Studies

Energy Technology Data Exchange (ETDEWEB)

Mishra, Amit [North Carolina State Univ., Raleigh, NC (United States); Li, Fanxing [North Carolina State Univ., Raleigh, NC (United States); Santiso, Erik [North Carolina State Univ., Raleigh, NC (United States)

2017-09-18

Energy and global climate change are two grand challenges to the modern society. An urgent need exists for development of clean and efficient energy conversion processes. The chemical looping strategy, which utilizes regenerable oxygen carriers (OCs) to indirectly convert carbonaceous fuels via redox reactions, is considered to be one of the more promising approaches for CO2 capture by the U.S. Department of Energy (USDOE). To date, most long-term chemical looping operations were conducted using gaseous fuels, even though direct conversion of coal is more desirable from both economics and CO2 capture viewpoints. The main challenges for direct coal conversion reside in the stringent requirements on oxygen carrier performances. In addition, coal char and volatile compounds are more challenging to convert than gaseous fuels. A promising approach for direct conversion of coal is the so called chemical looping with oxygen uncoupling (CLOU) technique. In the CLOU process, a metal oxide that decomposes at the looping temperature, and releases oxygen to the gas phase is used as the OC. The overarching objective of this project was to discover the fundamental principles for rational design and optimization of oxygen carriers (OC) in coal chemical looping combustion (CLC) processes. It directly addresses Topic Area B of the funding opportunity announcement (FOA) in terms of “predictive description of the phase behavior and mechanical properties” of “mixed metal oxide” based OCs and rational development of new OC materials with superior functionality. This was achieved through studies exploring i) iron-containing mixed-oxide composites as oxygen carriers for CLOU, ii) Ca1-xAxMnO3-δ (A = Sr and Ba) as oxygen carriers for CLOU, iii) CaMn1-xBxO3-δ (B=Al, V, Fe, Co, and Ni) as oxygen carrier for CLOU and iv) vacancy creation energy in Mn-containing perovskites as an indicator chemical looping with oxygen uncoupling.

The Biomechanics of Gender Difference and Whiplash Injury: Designing Safer Car Seats for Women

Directory of Open Access Journals (Sweden)

J. Mordaka

2003-01-01

Full Text Available Female car users are reported to have a higher incidence of soft tissue neck injuries in low speed rear-end collisions than males, and they apparently take longer to recover. This paper addresses the whiplash problem by developing a biomechanical FEM (Finite Element Method model of the 50th and the 5th percentile female cervical spines, based on the earlier published male model created at the Nottingham Trent University. This model relies on grafting a detailed biomechanical model of the neck and head onto a standard HYBRID III dummy model. The overall philosophy of the investigation was to see if females responded essentially as scaled down males from the perspective of rear end collisions. It was found that detailed responses varied significantly with gender and it became clear that females cannot be modelled as scaled-down males, thus confirming the need for separate male and female biomechanical models and a revision of car test programmes and regulations which are currently based on the average male. Further investigation is needed to quantify the gender differences and then recommendations can be made for changes to the design of car seats and head restraints in order to reduce the risk of soft tissue injury to women.

Computing Properties Of Chemical Mixtures At Equilibrium

Science.gov (United States)

Mcbride, B. J.; Gordon, S.

1995-01-01

Scientists and engineers need data on chemical equilibrium compositions to calculate theoretical thermodynamic properties of chemical systems. Information essential in design and analysis of such equipment as compressors, turbines, nozzles, engines, shock tubes, heat exchangers, and chemical-processing equipment. CET93 is general program that calculates chemical equilibrium compositions and properties of mixtures for any chemical system for which thermodynamic data are available. Includes thermodynamic data for more than 1,300 gaseous and condensed species and thermal-transport data for 151 gases. Written in FORTRAN 77.

Within-otolith variability in chemical fingerprints: implications for sampling designs and possible environmental interpretation.

Directory of Open Access Journals (Sweden)

Antonio Di Franco

Full Text Available Largely used as a natural biological tag in studies of dispersal/connectivity of fish, otolith elemental fingerprinting is usually analyzed by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS. LA-ICP-MS produces an elemental fingerprint at a discrete time-point in the life of a fish and can generate data on within-otolith variability of that fingerprint. The presence of within-otolith variability has been previously acknowledged but not incorporated into experimental designs on the presumed, but untested, grounds of both its negligibility compared to among-otolith variability and of spatial autocorrelation among multiple ablations within an otolith. Here, using a hierarchical sampling design of spatial variation at multiple scales in otolith chemical fingerprints for two Mediterranean coastal fishes, we explore: 1 whether multiple ablations within an otolith can be used as independent replicates for significance tests among otoliths, and 2 the implications of incorporating within-otolith variability when assessing spatial variability in otolith chemistry at a hierarchy of spatial scales (different fish, from different sites, at different locations on the Apulian Adriatic coast. We find that multiple ablations along the same daily rings do not necessarily exhibit spatial dependency within the otolith and can be used to estimate residual variability in a hierarchical sampling design. Inclusion of within-otolith measurements reveals that individuals at the same site can show significant variability in elemental uptake. Within-otolith variability examined across the spatial hierarchy identifies differences between the two fish species investigated, and this finding leads to discussion of the potential for within-otolith variability to be used as a marker for fish exposure to stressful conditions. We also demonstrate that a 'cost'-optimal allocation of sampling effort should typically include some level of within

Within-otolith variability in chemical fingerprints: implications for sampling designs and possible environmental interpretation.

Science.gov (United States)

Di Franco, Antonio; Bulleri, Fabio; Pennetta, Antonio; De Benedetto, Giuseppe; Clarke, K Robert; Guidetti, Paolo

2014-01-01

Largely used as a natural biological tag in studies of dispersal/connectivity of fish, otolith elemental fingerprinting is usually analyzed by laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS). LA-ICP-MS produces an elemental fingerprint at a discrete time-point in the life of a fish and can generate data on within-otolith variability of that fingerprint. The presence of within-otolith variability has been previously acknowledged but not incorporated into experimental designs on the presumed, but untested, grounds of both its negligibility compared to among-otolith variability and of spatial autocorrelation among multiple ablations within an otolith. Here, using a hierarchical sampling design of spatial variation at multiple scales in otolith chemical fingerprints for two Mediterranean coastal fishes, we explore: 1) whether multiple ablations within an otolith can be used as independent replicates for significance tests among otoliths, and 2) the implications of incorporating within-otolith variability when assessing spatial variability in otolith chemistry at a hierarchy of spatial scales (different fish, from different sites, at different locations on the Apulian Adriatic coast). We find that multiple ablations along the same daily rings do not necessarily exhibit spatial dependency within the otolith and can be used to estimate residual variability in a hierarchical sampling design. Inclusion of within-otolith measurements reveals that individuals at the same site can show significant variability in elemental uptake. Within-otolith variability examined across the spatial hierarchy identifies differences between the two fish species investigated, and this finding leads to discussion of the potential for within-otolith variability to be used as a marker for fish exposure to stressful conditions. We also demonstrate that a 'cost'-optimal allocation of sampling effort should typically include some level of within-otolith replication in the

Aerosol Chemical Speciation Monitor (ACSM) Instrument Handbook

Energy Technology Data Exchange (ETDEWEB)

Watson, Thomas B. [Brookhaven National Lab. (BNL), Upton, NY (United States)

2017-08-15

The Aerodyne Aerosol Chemical Speciation Monitor (ACSM) measures particle mass loading and chemical composition in real time for non-refractory sub-micron aerosol particles. The ACSM is designed for long-term unattended deployment and routine monitoring applications.

Implementation procedures for design certification

International Nuclear Information System (INIS)

Ritterbusch, S. E.; Brinkman, C. B.; Crump, M. W.

1995-01-01

The desire for safer plants arose primarily as the result of the Three Mile Island accident and the realization that plant safety could be impacted by complex plant systems interactions that are not easily identified through the traditional 'system-by-system' design process. Hence, it became apparent that the ALWR designs would have to be addressed through plant-wide Probabilistic Safety Assessments (PSAs) that addressed both accident-prevention and accident-mitigation design features. Prior to Design Certification the 'two-step' licensing process in the United States was not efficient. Utilities had to commit large amounts of capital to plant construction without confidence that an operating license would be issued when construction permit was issued often required design changes that resulted in significant construction delays. The 55 utilities operating nuclear plants in the U. S. each had their own design and operating preferences, resulting in many customized plants with a minimum of economic benefit from standardization. This was addressed by the U. S. Nuclear Regulatory Commission (NRC) in a new regulation (Title 10 of the Code of Federal Regulations, Part 52 or '10 CFR 52') which provides certification of a design that can later be referenced by an applicant for a Combined Operating License (COL). Identifying an ALWR solution for previously unanalyzed severe accident scenarios appeared difficult, at best, since severe accident research had to be performed and since there was no regulatory precedent. This meant that complex technical issues and licensing review policies had to be developed without the benefit of licensing standards or experience. As a result, a system of iterative interactions between the regulator and the industry was established, wherein a design or safety requirement would be proposed, then discussed along with development of the corresponding design feature, and finally revised and documented via NRC 'guidance'

Exposure assessment of a cyclist to particles and chemical elements.

Science.gov (United States)

Ramos, C A; Silva, J R; Faria, T; Wolterbeek, T H; Almeida, S M

2017-05-01

Cycle paths can be used as a route for active transportation or simply to cycle for physical activity and leisure. However, exposure to air pollutants can be boosted while cycling, in urban environments, due to the proximity to vehicular emissions and elevated breathing rates. The objective of this work was to assess the exposure of a cyclist to particles and to chemical elements by combining real-time aerosol mass concentration reading equipment and biomonitoring techniques. PM 10 and PM 2.5 were measured on three cycle paths located in Lisbon, during weekdays and weekends and during rush hours and off-peak hours resulting in a total of 60 campaigns. Lichens were exposed along cycle paths for 3 months, and their element contents were measured by instrumental neutron activation analysis using the k 0 methodology (k 0 -INAA). Using a bicycle commute route of lower traffic intensity and avoiding rush hours or other times with elevated vehicular congestion facilitate a reduction in exposure to pollutants. The implementation of cycle paths in cities is important to stimulate physical activity and active transportation; however, it is essential to consider ambient air and pollutant sources to create safer infrastructures.

Implementation of an innovative teaching project in a Chemical Process Design course at the University of Cantabria, Spain

Science.gov (United States)

Galan, Berta; Muñoz, Iciar; Viguri, Javier R.

2016-09-01

This paper shows the planning, the teaching activities and the evaluation of the learning and teaching process implemented in the Chemical Process Design course at the University of Cantabria, Spain. Educational methods to address the knowledge, skills and attitudes that students who complete the course are expected to acquire are proposed and discussed. Undergraduate and graduate engineers' perceptions of the methodology used are evaluated by means of a questionnaire. Results of the teaching activities and the strengths and weaknesses of the proposed case study are discussed in relation to the course characteristics. The findings of the empirical evaluation shows that the excessive time students had to dedicate to the case study project and dealing with limited information are the most negative aspects obtained, whereas an increase in the students' self-confidence and the practical application of the methodology are the most positive aspects. Finally, improvements are discussed in order to extend the application of the methodology to other courses offered as part of the chemical engineering degree.

Construction technique for a chemical plant (III)

International Nuclear Information System (INIS)

1978-08-01

This book mentions design of instrumentation and construction for a chemical plant, which deals with the change of instrumentation, construction, choice of material test, construction of thermal insulation work for a chemical plant, about classification and main materials, the problems on construction, painting plan and construction for a chemical plant such as paint and painting, safety and hygiene, cleaning of a chemical plant on the time for washing and decision of the way of washing, start up test for a chemical plant such as introduction of the check, construction and repair.

Safer Roads: Comparisons Between Road Assessment Program and Composite Road Safety Index Method

Directory of Open Access Journals (Sweden)

Mohd Razelan Intan Suhana

2017-01-01

Full Text Available In most countries, crash statistics have becoming very crucial in evaluating road’s safety level. In Malaysia, these data are very important in deciding crash-prone areas known as black spot where specific road improvements plan will be proposed. However due to the unavailability of reliable crash data in many developing countries, appropriate road maintenance measures are facing great troubles. In light of that, several proactive methods in defining road’s safety level such as Road Assessment Program (RAP have emerged. This research aim to compare two proactive methods that have been tested in Malaysian roads ; road assessment program and road environment risk index which was developed based on composite index theory in defining road’s safety level. Composite road environment risk index was combining several crucial environment indicators, assigning weight and aggregating the individual index together to form a single value representing the road’s safety level. Based on the results, it can be concluded that both road assessment program and composite road environment risk index are contradicted in six different ways such as type of speed used, type of analysis used and their final outcomes. However, with an aim to promote safer roads, these two methods can be used concurrently as the outcomes in both methods seems to fulfil each other’s gap very well.

Task-Specific Ionic Liquids for Mars Exploration (Green Chemistry for a Red Planet)

Science.gov (United States)

Karr, L. J.; Curreri, P. A.; Paley, M. S.; Kaukler, W. F.; Marone, M. J.

2012-01-01

Ionic Liquids (ILs) are organic salts with low melting points that are liquid at or near room temperature. The combinations of available ions and task-specific molecular designability make them suitable for a huge variety of tasks. Because of their low flammability, low vapor pressure, and stability in harsh environments (extreme temperatures, hard vacuum) they are generally much safer and "greener" than conventional chemicals and are thus suitable for a wide range of applications that support NASA exploration goals. This presentation describes several of the ongoing applications that are being developed at MSFC.

Designing learning curves for carbon capture based on chemical absorption according to the minimum work of separation

International Nuclear Information System (INIS)

Rochedo, Pedro R.R.; Szklo, Alexandre

2013-01-01

Highlights: • This work defines the minimum work of separation (MWS) for a capture process. • Findings of the analysis indicated a MWS of 0.158 GJ/t for post-combustion. • A review of commercially available processes based on chemical absorption was made. • A review of learning models was conducted, with the addition on a novel model. • A learning curve for post-combustion carbon capture was successfully designed. - Abstract: Carbon capture is one of the most important alternatives for mitigating greenhouse gas emissions in energy facilities. The post-combustion route based on chemical absorption with amine solvents is the most feasible alternative for the short term. However, this route implies in huge energy penalties, mainly related to the solvent regeneration. By defining the minimum work of separation (MWS), this study estimated the minimum energy required to capture the CO 2 emitted by coal-fired thermal power plants. Then, by evaluating solvents and processes and comparing it to the MWS, it proposes the learning model with the best fit for the post-combustion chemical absorption of CO 2 . Learning models are based on earnings from experience, which can include the intensity of research and development. In this study, three models are tested: Wright, DeJong and D and L. Findings of the thermochemical analysis indicated a MWS of 0.158 GJ/t for post-combustion. Conventional solvents currently present an energy penalty eight times the MWS. By using the MWS as a constraint, this study found that the D and L provided the best fit to the available data of chemical solvents and absorption plants. The learning rate determined through this model is very similar to the ones found in the literature

Polymer Exemption for New Chemicals under the Toxic Substances Control Act (TSCA)

Science.gov (United States)

EPA has established an exemption for certain polymers to encourage manufacturers to make safer polymers. To learn more about this exemption, eligibility, and it's requirements, read this overview of the exemption.

Estimation of environment-related properties of chemicals for design of sustainable processes: development of group-contribution+ (GC+) property models and uncertainty analysis.

Science.gov (United States)

Hukkerikar, Amol Shivajirao; Kalakul, Sawitree; Sarup, Bent; Young, Douglas M; Sin, Gürkan; Gani, Rafiqul

2012-11-26

of the developed property models for the estimation of environment-related properties and uncertainties of the estimated property values is highlighted through an illustrative example. The developed property models provide reliable estimates of environment-related properties needed to perform process synthesis, design, and analysis of sustainable chemical processes and allow one to evaluate the effect of uncertainties of estimated property values on the calculated performance of processes giving useful insights into quality and reliability of the design of sustainable processes.

Journal of Chemical Sciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Journal of Chemical Sciences. Anil D Naik. Articles written in Journal of Chemical Sciences. Volume 113 Issue 4 August 2001 pp 285-290 Inorganic. Design, synthesis and physico-chemical investigation of a dinuclear zinc(II) complex with a novel 'end-off' compartmental ligand · Anil D Naik Vidyanand K ...

Journal of Chemical Sciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Journal of Chemical Sciences. Vidyanand K Revankar. Articles written in Journal of Chemical Sciences. Volume 113 Issue 4 August 2001 pp 285-290 Inorganic. Design, synthesis and physico-chemical investigation of a dinuclear zinc(II) complex with a novel 'end-off' compartmental ligand · Anil D Naik ...

System 80+TM standard plant: Design and operations overview

International Nuclear Information System (INIS)

Matzie, R.A.; Ritterbusch, S.E.

1999-01-01

The System 80+ Standard Plant Design is a 1400 MWe evolutionary Advanced Light Water Reactor (ALWR), designed to meet the Electric Power Research Institute (EPRI) ALWR Utility Requirements Document (URD) and the demands of the international market for nuclear power plants which are not only safer but also more economical to maintain and operate. ABB Combustion Engineering Nuclear Power used a defense-in-depth process that (1) adds design margin to basic components to improve performance during normal operation and to decrease the likelihood of an unanticipated transient or an accident, (2) improves the redundancy and diversity of safety systems in order to mitigate design basis accidents and prevent severe accidents, and (3) improves severe accident mitigation capability. This paper describes the most important improved systems and components with emphasis on severe accident prevention and mitigation capability. The improved design features were implemented in an evolutionary manner using proven components. This approach ensures that the plant operates safely and economically, as demonstrated by operating plants in the US and the Republic of Korea. Detailed studies, summarized in this paper, have shown that the System 80+ plant availability is expected to exceed the ALWR requirement of 87% and that the annual operations and maintenance costs are expected to be reduced by $14 million. (author)

The ESKOM pebble bed modular reactor

International Nuclear Information System (INIS)

Gittus, J.H.

1999-01-01

An audit has been made of the design, construction, safety, economics and marketability of the ESKOM pebble bed modular reactor (PBMR). In this paper that audit is briefly summarized. The principal conclusions of the audit are as follows. The design is sound. It is a logical development of the designs proposed for other, modern, high-temperature gas-cooled reactors. More than 80% of the cost of constructing and commissioning a series of PBMRs would be spent in South Africa. The PBMR is much safer than existing nuclear power reactors and for many practical purposes it may be treated as a conventional chemical plant. The PBMR is economically competitive with thermal power stations. There is a substantial global market for the PBMR. (author)

A safer and flexible method for the oxygen functionalization of carbon nanotubes by nitric acid vapors

International Nuclear Information System (INIS)

Santangelo, Saveria; Piperopoulos, Elpida; Fazio, Enza; Faggio, Giuliana; Ansari, Shabana; Lanza, Maurizio; Neri, Fortunato; Messina, Giacomo; Milone, Candida

2014-01-01

The functionalization by nitric acid vapors at azeotropic concentration has been recently proposed to eliminate drawbacks of the widely utilized liquid phase functionalization method. This work suggests to exploit the so-called “salt effect” to improve the vapor phase oxidation method in terms of safety and flexibility. Increasing the relative volatility of acid, the addition of Mg(NO 3 ) 2 salt to the HNO 3 + H 2 O solution allows (i) obtaining vapors with HNO 3 at the azeotropic concentration from a more diluted liquid solution (i.e. operating under safer conditions), and (ii) varying the concentration of HNO 3 in the vapor phase even above the azeotropic concentration limit (with improved process flexibility). High-resolution transmission electron microscopy, thermo-gravimetry, Raman spectroscopy and X-ray photoemission spectroscopy systematic analyses are carried out on pristine and oxidized nanotubes in order to assess their functionalization degree, surface chemistry and structural evolution. The most relevant finding of this preliminary study is that the nanotube functionalization extent increases linearly with the HNO 3 vapor concentration.

A safer and flexible method for the oxygen functionalization of carbon nanotubes by nitric acid vapors

Energy Technology Data Exchange (ETDEWEB)

Santangelo, Saveria, E-mail: saveria.santangelo@unirc.it [Dipartimento di Ingegneria Civile, dell’Energia, dell’Ambiente e dei Materiali (DICEAM), Università “Mediterranea”, 89122 Reggio Calabria (Italy); Piperopoulos, Elpida [Dipartimento di Ingegneria Eletronica, Chimica ed Ingegneria Industriale (DIECII), Università di Messina, 98166 Messina (Italy); Fazio, Enza [Dipartimento di Fisica e di Scienze della Terra (DFST), Università di Messina, 98166 Messina (Italy); Faggio, Giuliana [Dipartimento di Ingegneria dell’Informazione, delle Infrastrutture e dell’Energia Sostenibile (DIIES), Università “Mediterranea”, 89122 Reggio Calabria (Italy); Ansari, Shabana [Dipartimento di Ingegneria Eletronica, Chimica ed Ingegneria Industriale (DIECII), Università di Messina, 98166 Messina (Italy); Lanza, Maurizio [Istituto per i Processi Chimico Fisici (IPCF) del CNR, 98158 Messina (Italy); Neri, Fortunato [Dipartimento di Fisica e di Scienze della Terra (DFST), Università di Messina, 98166 Messina (Italy); Messina, Giacomo [Dipartimento di Ingegneria dell’Informazione, delle Infrastrutture e dell’Energia Sostenibile (DIIES), Università “Mediterranea”, 89122 Reggio Calabria (Italy); Milone, Candida [Dipartimento di Ingegneria Eletronica, Chimica ed Ingegneria Industriale (DIECII), Università di Messina, 98166 Messina (Italy)

2014-06-01

The functionalization by nitric acid vapors at azeotropic concentration has been recently proposed to eliminate drawbacks of the widely utilized liquid phase functionalization method. This work suggests to exploit the so-called “salt effect” to improve the vapor phase oxidation method in terms of safety and flexibility. Increasing the relative volatility of acid, the addition of Mg(NO{sub 3}){sub 2} salt to the HNO{sub 3} + H{sub 2}O solution allows (i) obtaining vapors with HNO{sub 3} at the azeotropic concentration from a more diluted liquid solution (i.e. operating under safer conditions), and (ii) varying the concentration of HNO{sub 3} in the vapor phase even above the azeotropic concentration limit (with improved process flexibility). High-resolution transmission electron microscopy, thermo-gravimetry, Raman spectroscopy and X-ray photoemission spectroscopy systematic analyses are carried out on pristine and oxidized nanotubes in order to assess their functionalization degree, surface chemistry and structural evolution. The most relevant finding of this preliminary study is that the nanotube functionalization extent increases linearly with the HNO{sub 3} vapor concentration.

Chemical composition, toxicity and non-target effects of Pinus kesiya essential oil: An eco-friendly and novel larvicide against malaria, dengue and lymphatic filariasis mosquito vectors.

Science.gov (United States)

Govindarajan, Marimuthu; Rajeswary, Mohan; Benelli, Giovanni

2016-07-01

Mosquitoes (Diptera: Culicidae) are vectors of important parasites and pathogens causing death, poverty and social disability worldwide, with special reference to tropical and subtropical countries. The overuse of synthetic insecticides to control mosquito vectors lead to resistance, adverse environmental effects and high operational costs. Therefore, the development of eco-friendly control tools is an important public health challenge. In this study, the mosquito larvicidal activity of Pinus kesiya leaf essential oil (EO) was evaluated against the malaria vector Anopheles stephensi, the dengue vector Aedes aegypti and the lymphatic filariasis vector Culex quinquefasciatus. The chemical composition of the EO was analyzed by gas chromatography-mass spectroscopy. GC-MS revealed that the P. kesiya EO contained 18 compounds. Major constituents were α-pinene, β-pinene, myrcene and germacrene D. In acute toxicity assays, the EO showed significant toxicity against early third-stage larvae of An. stephensi, Ae. aegypti and Cx. quinquefasciatus, with LC50 values of 52, 57, and 62µg/ml, respectively. Notably, the EO was safer towards several aquatic non-target organisms Anisops bouvieri, Diplonychus indicus and Gambusia affinis, with LC50 values ranging from 4135 to 8390µg/ml. Overall, this research adds basic knowledge to develop newer and safer natural larvicides from Pinaceae plants against malaria, dengue and filariasis mosquito vectors. Copyright © 2016 Elsevier Inc. All rights reserved.

Cost vs. safety: A novel design for t

Directory of Open Access Journals (Sweden)

Komali Kantamaneni

2017-08-01

Full Text Available Tornadoes are dangerous and destructive weather phenomena. The strongest category of tornadoes on the enhanced Fujita and TORRO scales is responsible for 75% of property destruction and deaths across the globe. These issues highlight the need for new design practices aimed at producing tornado proof homes in particular 3D CAD models in tornado prone zones at current climatic scenarios. Previous studies were entirely based on traditional slants and failed to offer a reliable tornado proof home, other than small rooms and trailers, while, none of the literature concentrated on multiple factors (cost, safety and high-wind proof. Therefore, a knowledge gap exists. In order to address the current research gap, this study attempts to develop an innovative 3D CAD model for tornado resistant homes by incorporating 2 PA (Two Path Analysis. Consequently, this study provides a new design using a 3D-CAD model for a tornado resistant home as in Path One and cost and safety scenarios in Path Two. However, this new design utilizes missile steel and shield technology. Preliminary results showed that, while this new design is safer and more technically sophisticated, it involves an increase of 25–30% in construction costs. However, this increased expense is low in comparison with rebuilding costs.

Guard Cell and Tropomyosin Inspired Chemical Sensor

Directory of Open Access Journals (Sweden)

Jacquelyn K.S. Nagel

2013-10-01

Full Text Available Sensors are an integral part of many engineered products and systems. Biological inspiration has the potential to improve current sensor designs as well as inspire innovative ones. This paper presents the design of an innovative, biologically-inspired chemical sensor that performs “up-front” processing through mechanical means. Inspiration from the physiology (function of the guard cell coupled with the morphology (form and physiology of tropomyosin resulted in two concept variants for the chemical sensor. Applications of the sensor design include environmental monitoring of harmful gases, and a non-invasive approach to detect illnesses including diabetes, liver disease, and cancer on the breath.

Chemical reactor development : from laboratory synthesis to industrial production

NARCIS (Netherlands)

Thoenes, D.

1998-01-01

Chemical Reactor Development is written primarily for chemists and chemical engineers who are concerned with the development of a chemical synthesis from the laboratory bench scale, where the first successful experiments are performed, to the design desk, where the first commercial reactor is

Chemical Engineering Education - Current and Future Trends

DEFF Research Database (Denmark)

Gani, Rafiqul

topics (transport phenomena, separations, reaction engineering, etc.) must remain strong, should the applications that currently emphasize commodity chemicals also include new topics such as sustainability, and product design? In Europe, the European Federation of Chemical Engineering (EFCE) has taken...... has a product focus. With this shift of the chemical industry, what should be the curriculum of the chemical engineering degrees at the BSc- and MSc-levels, and, are the skill set of chemical engineers appropriate for this altered chemical industry? While the basic skill set, defined by the core...... a leading role to define the chemical engineering curriculum. The result has been a set of recommendations for the first (BSc), second (MSc) and third (PhD) cycle chemical engineering education aligned to the Bologna Process. They recommend that students studying towards bachelor and masters qualifications...

Analysis of digester design concepts

Energy Technology Data Exchange (ETDEWEB)

Ashare, E.; Wilson, E. H.

1979-01-29

Engineering economic analyses were performed on various digester design concepts to determine the relative performance for various biomass feedstocks. A comprehensive literature survey describing the state-of-the-art of the various digestion designs is included. The digester designs included in the analyses are CSTR, plug flow, batch, CSTR in series, multi-stage digestion and biomethanation. Other process options investigated included pretreatment processes such as shredding, degritting, and chemical pretreatment, and post-digestion processes, such as dewatering and gas purification. The biomass sources considered include feedlot manure, rice straw, and bagasse. The results of the analysis indicate that the most economical (on a unit gas cost basis) digester design concept is the plug flow reactor. This conclusion results from this system providing a high gas production rate combined with a low capital hole-in-the-ground digester design concept. The costs determined in this analysis do not include any credits or penalties for feedstock or by-products, but present the costs only for conversion of biomass to methane. The batch land-fill type digester design was shown to have a unit gas cost comparable to that for a conventional stirred tank digester, with the potential of reducing the cost if a land-fill site were available for a lower cost per unit volume. The use of chemical pretreatment resulted in a higher unit gas cost, primarily due to the cost of pretreatment chemical. A sensitivity analysis indicated that the use of chemical pretreatment could improve the economics provided a process could be developed which utilized either less pretreatment chemical or a less costly chemical. The use of other process options resulted in higher unit gas costs. These options should only be used when necessary for proper process performance, or to result in production of a valuable by-product.

Molpher: a software framework for systematic chemical space exploration

Czech Academy of Sciences Publication Activity Database

Hoksza, D.; Škoda, P.; Voršilák, M.; Svozil, Daniel

2014-01-01

Roč. 6, č. 1 (2014) ISSN 1758-2946 R&D Projects: GA TA ČR TA02010212; GA ČR(CZ) GAP202/11/0968; GA ČR(CZ) GP14-29032P Keywords : Chemical space exploration * De-novo design * In silico ligand design * Chemical biology tools Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 4.547, year: 2014

Comparative study of the chemical properties of palm oil extracted ...

African Journals Online (AJOL)

The chemical properties of oil samples determined were free fatty acid, acid value, saponification value, peroxide value, iodine value and moisture content. The experimental design adopted was 3 x 2 x 2 factorial randomized complete block design in three replicates. The data of chemical properties of extracted palm oil ...

Particle Engineering Via Mechanical Dry Coating in the Design of Pharmaceutical Solid Dosage Forms.

Science.gov (United States)

Qu, Li; Morton, David A V; Zhou, Qi Tony

2015-01-01

Cohesive powders are problematic in the manufacturing of pharmaceutical solid dosage forms because they exhibit poor flowability, fluidization and aerosolization. These undesirable bulk properties of cohesive powders represent a fundamental challenge in the design of efficient pharmaceutical manufacturing processes. Recently, mechanical dry coating has attracted increasing attention as it can improve the bulk properties of cohesive powders in a cheaper, simpler, safer and more environment-friendly way than the existing solvent-based counterparts. In this review, mechanical dry coating techniques are outlined and their potential applications in formulation and manufacturing of pharmaceutical solid dosage forms are discussed. Reported data from the literature have shown that mechanical dry coating holds promise for the design of superior pharmaceutical solid formulations or manufacturing processes by engineering the interfaces of cohesive powders in an efficient and economical way.

Rotary Bed Reactor for Chemical-Looping Combustion with Carbon Capture. Part 1: Reactor Design and Model Development

KAUST Repository

Zhao, Zhenlong

2013-01-17

Chemical-looping combustion (CLC) is a novel and promising technology for power generation with inherent CO2 capture. Currently, almost all of the research has been focused on developing CLC-based interconnected fluidized-bed reactors. In this two-part series, a new rotary reactor concept for gas-fueled CLC is proposed and analyzed. In part 1, the detailed configuration of the rotary reactor is described. In the reactor, a solid wheel rotates between the fuel and air streams at the reactor inlet and exit. Two purging sectors are used to avoid the mixing between the fuel stream and the air stream. The rotary wheel consists of a large number of channels with copper oxide coated on the inner surface of the channels. The support material is boron nitride, which has high specific heat and thermal conductivity. Gas flows through the reactor at elevated pressure, and it is heated to a high temperature by fuel combustion. Typical design parameters for a thermal capacity of 1 MW have been proposed, and a simplified model is developed to predict the performances of the reactor. The potential drawbacks of the rotary reactor are also discussed. © 2012 American Chemical Society.

Development of the advanced CANDU technology -Development of basic technology for HWR design

International Nuclear Information System (INIS)

Seok, Ho Cheon; Seok, Soo Dong; Lee, Sang Yong

1996-07-01

It is believed that it is easier for Korea to become self-reliant in PHWR technology than in PWR technology, mainly because of the lower design pressure and temperature and because of the simplicity, economy, flexibility of the fuel cycle in comparison with PWR systems. Even though one has no doubt about the safety and the economics of the PHWR's that are now being operated or constructed in Korea. It is necessary to develop the advanced design technology for even safer and more economical PHWR systems to overcome the ever growing international resistance to sharing of nuclear technology and to meet the even more stringent requirements for the future public acceptance of nuclear power. This study is to develop the more advance design technology compared to the existing one, especially in the field of reactor physics, safety systems and safety evaluation to realize the above requirements. 71 tabs., 147 figs., 143 refs. (Author)

Development of the advanced CANDU technology -Development of basic technology for HWR design-

Energy Technology Data Exchange (ETDEWEB)

Suk, Hoh Chun; Lee, Sang Yong; Suk, Soo Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1995-07-01

It is believed that it is easier for Korea to become self-reliant in PHWR technology than in PWR technology, mainly because of the lower design pressure and temperature and because of the simplicity, economy, flexibility of the fuel cycle in comparison with PWR systems. Even though one has no doubt about the safety and the economics of the PHWR`s that are now being operated or constructed in Korea, it is necessary to develop the advanced design technology for even safer and more economical PHWR systems to overcome the ever growing international resistance to sharing of nuclear technology and to meet the even more stringent requirements for the future public acceptance of nuclear power. This study is to develop the more advance design technology compared to the existing one, by performing in-depth studies especially in the field of reactor physics, safety systems and safety evaluation to realize the above requirements. 90 figs, 50 tabs, 38 refs. (Author).

Development of the advanced CANDU technology -Development of basic technology for HWR design-

International Nuclear Information System (INIS)

Suk, Hoh Chun; Lee, Sang Yong; Suk, Soo Dong

1995-07-01

It is believed that it is easier for Korea to become self-reliant in PHWR technology than in PWR technology, mainly because of the lower design pressure and temperature and because of the simplicity, economy, flexibility of the fuel cycle in comparison with PWR systems. Even though one has no doubt about the safety and the economics of the PHWR's that are now being operated or constructed in Korea, it is necessary to develop the advanced design technology for even safer and more economical PHWR systems to overcome the ever growing international resistance to sharing of nuclear technology and to meet the even more stringent requirements for the future public acceptance of nuclear power. This study is to develop the more advance design technology compared to the existing one, by performing in-depth studies especially in the field of reactor physics, safety systems and safety evaluation to realize the above requirements. 90 figs, 50 tabs, 38 refs. (Author)

Design and safety aspects of the Cornell cold neutron source

International Nuclear Information System (INIS)

Ouellet, Carol G.; Clark, David D.

1992-01-01

The cold neutron beam facility at the Cornell University TRIGA Mark II reactor will begin operational testing in early 1993. It is designed to provide a low background subthermal neutron beam that is as free as possible of fast neutrons and gamma rays for applied research and graduate-level instruction. The Cornell cold neutron source differs from the more conventional types of cold sources in that it is inherently safer because it uses a safe handling material (mesitylene) as the moderator instead of hydrogen or methane, avoids the circulation of cryogenic fluids by removing heat from the system by conduction through a 99.99% pure copper rod attached to a cryogenic refrigerator, and is much smaller in its size and loads. The design details and potential hazards are described, where it is concluded that no credible accident involving the cold source could cause damage to the reactor or personnel, or cause release of radioactivity. (author)

Excavation research with chemical explosives

Energy Technology Data Exchange (ETDEWEB)

Vandenberg, William E; Day, Walter C [U.S. Army Engineer Nuclear Cratering Group, Lawrence Radiation Laboratory, Livermore, CA (United States)

1970-05-01

The US Army Engineer Nuclear Cratering Group (NCG) is located at the Lawrence Radiation Laboratory in Livermore, California. NCG was established in 1962 and assigned responsibility for technical program direction of the Corps of Engineers Nuclear Excavation Research Program. The major part of the experimental program has been the execution of chemical explosive excavation experiments. In the past these experiments were preliminary to planned nuclear excavation experiments. The experience gained and technology developed in accomplishing these experiments has led to an expansion of NCG's research mission. The overall research and development mission now includes the development of chemical explosive excavation technology to enable the Corps of Engineers to more economically accomplish Civil Works Construction projects of intermediate size. The current and future chemical explosive excavation experiments conducted by NCG will be planned so as to provide data that can be used in the development of both chemical and nuclear excavation technology. In addition, whenever possible, the experiments will be conducted at the specific sites of authorized Civil Works Construction Projects and will be designed to provide a useful portion of the engineering structures planned in that project. Currently, the emphasis in the chemical explosive excavation program is on the development of design techniques for producing specific crater geometries in a variety of media. Preliminary results of two such experiments are described in this paper; Project Pre-GONDOLA III, Phase III, Reservoir Connection Experiment; and a Safety Calibration Series for Project TUGBOAT, a small boat harbor excavation experiment.

Excavation research with chemical explosives

International Nuclear Information System (INIS)

Vandenberg, William E.; Day, Walter C.

1970-01-01

The US Army Engineer Nuclear Cratering Group (NCG) is located at the Lawrence Radiation Laboratory in Livermore, California. NCG was established in 1962 and assigned responsibility for technical program direction of the Corps of Engineers Nuclear Excavation Research Program. The major part of the experimental program has been the execution of chemical explosive excavation experiments. In the past these experiments were preliminary to planned nuclear excavation experiments. The experience gained and technology developed in accomplishing these experiments has led to an expansion of NCG's research mission. The overall research and development mission now includes the development of chemical explosive excavation technology to enable the Corps of Engineers to more economically accomplish Civil Works Construction projects of intermediate size. The current and future chemical explosive excavation experiments conducted by NCG will be planned so as to provide data that can be used in the development of both chemical and nuclear excavation technology. In addition, whenever possible, the experiments will be conducted at the specific sites of authorized Civil Works Construction Projects and will be designed to provide a useful portion of the engineering structures planned in that project. Currently, the emphasis in the chemical explosive excavation program is on the development of design techniques for producing specific crater geometries in a variety of media. Preliminary results of two such experiments are described in this paper; Project Pre-GONDOLA III, Phase III, Reservoir Connection Experiment; and a Safety Calibration Series for Project TUGBOAT, a small boat harbor excavation experiment

Systematic Optimization-Based Integrated Chemical Product–Process Design Framework

DEFF Research Database (Denmark)

Cignitti, Stefano; Mansouri, Seyed Soheil; Woodley, John M.

2018-01-01

An integrated optimization-based framework for product and process design is proposed. The framework uses a set of methods and tools to obtain the optimal product–process design solution given a set of economic and environmental sustainability targets. The methods and tools required are property...... of the framework is demonstrated through three case studies: (i) refrigeration cycle unit for R134a replacement, (ii) a mixed working fluid design problem for R134a replacement, and (iii) pure solvent design for water-acetic acid LLE extraction. Through the application of the framework it is demonstrated that all...... prediction through group contributions, unless supported with a database, computer-aided molecular and mixture/blend design for generation of novel as well as existing products and mathematical programming for formulating and solving multiscale integrated process–product design problems. The application...

NIF: Impacts of chemical accidents and comparison of chemical/radiological accident approaches

International Nuclear Information System (INIS)

Lazaro, M.A.; Policastro, A.J.; Rhodes, M.

1996-01-01

The US Department of Energy (DOE) proposes to construct and operate the National Ignition Facility (NIF). The goals of the NIF are to (1) achieve fusion ignition in the laboratory for the first time by using inertial confinement fusion (ICF) technology based on an advanced-design neodymium glass solid-state laser, and (2) conduct high-energy-density experiments in support of national security and civilian applications. The primary focus of this paper is worker-public health and safety issues associated with postulated chemical accidents during the operation of NIF. The key findings from the accident analysis will be presented. Although NIF chemical accidents will be emphasized, the important differences between chemical and radiological accident analysis approaches and the metrics for reporting results will be highlighted. These differences are common EIS facility and transportation accident assessments

Face mask removal is safer than helmet removal for emergent airway access in American football.

Science.gov (United States)

Swartz, Erik E; Mihalik, Jason P; Beltz, Nora M; Day, Molly A; Decoster, Laura C

2014-06-01

-camera three-dimensional motion system and a three-point one-segment marker set were used to record motion of the head. Face mask removal resulted in less motion in all three planes, required less completion time, and was easier to perform than HR. The RIQ helmet resulted in less frontal plane motion and less time to task completion, and was easier to remove than VSR4 helmets. Inflated helmets-regardless of helmet type-required less removal time but did not result in greater cervical spine motion or difficulty. It is safer to remove the face mask in the prehospital setting for the potential spine-injured American football player than to remove the helmet, based on results from both a traditional and newer football helmet designs. Deflating the air bladder inside the helmet does not provide an advantage. Copyright © 2014 Elsevier Inc. All rights reserved.

Design features in Korean next generation reactor focused on performance and economic viability

International Nuclear Information System (INIS)

Lee, J.S.; Chung, M.S.; Na, J.H.; Kim, M.C.; Choi, Y.S.

2001-01-01

As of the end of Dec. 1999, Korea's total nuclear power capacity reached 13,716 MWe with 16 units in operation and 4 units under construction. In addition, as part of the national long-term R and D programme launched in 1992, the Korean Next Generation Reactor (KNGR) is being developed to meet the electricity demands in the years to come and is expected to be safer and more economically competitive than any other conventional electric power sources in Korea. The KNGR project has successfully completed its second phase and is now on the third phase. In Phase III of the KNGR design development project, KNGR aims at reinforcing the economic competitiveness while maintaining safety goals. To achieve these objectives, the design options studied and the design requirements set up in the first phase are pursued while the second phase are being reviewed. This paper summarizes such efforts for design improvement in terms of performance and economic viability along with the status of nuclear power generation in Korea, focusing on KNGR currently. (author)

Canned bluefin tuna, an in vitro cardioprotective functional food potentially safer than commercial fish oil based pharmaceutical formulations.

Science.gov (United States)

Tenore, Gian Carlo; Calabrese, Giorgio; Ritieni, Alberto; Campiglia, Pietro; Giannetti, Daniela; Novellino, Ettore

2014-09-01

Commercial canned fish species typical in the Italian market were evaluated for their lipid profile. Bluefin tuna samples showed the highest content in omega-3 fatty acids (n-3 PUFA) among the canned fish samples analyzed. Tests on H9C2 cardiomyocytes revealed that bluefin tuna n-3 PUFA may responsible for a significant cell protection against both physiological and doxorubicin-induced oxidative stress. Analogous tests performed by incubating cardiac cells with n-3 PUFA ethyl esters, of which most of fish oil pharmaceutical formulations (FOPF) are based, showed cytotoxicity at high doses. Our results highlighted that n-3 PUFA contents in a 50 g canned bluefin tuna portion would be almost equivalent to and potentially safer than those of 1 FOPF capsule (1000 mg)/die usually suggested for hyperlipidaemic subjects. Thus, Italian commercial canned bluefin tuna could be indicated as a functional food with potential health benefits for the prevention and care of cardiovascular disorders. Copyright © 2014 Elsevier Ltd. All rights reserved.

The highway and railroad operating environments for hazardous shipments in the United States - safer in the '90s?

International Nuclear Information System (INIS)

Saricks, C.L.; Tompkins, M.M.

2000-01-01

This paper seeks to illuminate the status of transportation safety and risk for large-quantity shipments of spent commercial reactor fuel and mixed and hazardous wastes by examining road and rail accident and vehicular travel data from the mid-1990s. Of special interest are the effect of speed limit changes on controlled-access expressways (chiefly the Interstate Highway System) and the possible effect of season-to-season climatic variation on road transport. We found that improvements in railroad technology and infrastructure have created a safer overall operating environment for railroad freight shipments. We also found recent evidence of an increase in accident rates of heavy combination trucks in states that have raised highway speed limits. Finally, cold weather increases road transport risk, while conditions associated with higher ambient temperatures do not. This last finding is in contrast to rail transport, for which the literature associates both hot and cold temperature extremes with higher accident rates

Synthetic Biology for Specialty Chemicals.

Science.gov (United States)

Markham, Kelly A; Alper, Hal S

2015-01-01

In this review, we address recent advances in the field of synthetic biology and describe how those tools have been applied to produce a wide variety of chemicals in microorganisms. Here we classify the expansion of the synthetic biology toolbox into three different categories based on their primary function in strain engineering-for design, for construction, and for optimization. Next, focusing on recent years, we look at how chemicals have been produced using these new synthetic biology tools. Advances in producing fuels are briefly described, followed by a more thorough treatment of commodity chemicals, specialty chemicals, pharmaceuticals, and nutraceuticals. Throughout this review, an emphasis is placed on how synthetic biology tools are applied to strain engineering. Finally, we discuss organism and host strain diversity and provide a future outlook in the field.

Engineering yeast metabolism for production of fuels and chemicals

DEFF Research Database (Denmark)

Nielsen, Jens

2016-01-01

faster development of metabolically engineered strains that can be used for production of fuels and chemicals. The yeast Saccharomyces cerevisiae is widely used for production of fuels, chemicals, pharmaceuticals and materials. Through metabolic engineering of this yeast a number of novel industrial...... as for metabolic design. In this lecture it will be demonstrated how the Design-Build-Test cycle of metabolic engineering has allowed for development of yeast cell factories for production of a range of different fuels and chemicals. Some examples of different technologies will be presented together with examples......Metabolic engineering relies on the Design-Build-Test cycle. This cycle includes technologies like mathematical modeling of metabolism, genome editing and advanced tools for phenotypic characterization. In recent years there have been advances in several of these technologies, which has enabled...

Chemical and Metallurgy Research (CMR) Sample Tracking System Design Document

International Nuclear Information System (INIS)

Bargelski, C. J.; Berrett, D. E.

1998-01-01

The purpose of this document is to describe the system architecture of the Chemical and Metallurgy Research (CMR) Sample Tracking System at Los Alamos National Laboratory. During the course of the document observations are made concerning the objectives, constraints and limitations, technical approaches, and the technical deliverables

Optimal Design and Operation of In-Situ Chemical Oxidation Using Stochastic Cost Optimization Toolkit

Science.gov (United States)

Kim, U.; Parker, J.; Borden, R. C.

2014-12-01

In-situ chemical oxidation (ISCO) has been applied at many dense non-aqueous phase liquid (DNAPL) contaminated sites. A stirred reactor-type model was developed that considers DNAPL dissolution using a field-scale mass transfer function, instantaneous reaction of oxidant with aqueous and adsorbed contaminant and with readily oxidizable natural oxygen demand ("fast NOD"), and second-order kinetic reactions with "slow NOD." DNAPL dissolution enhancement as a function of oxidant concentration and inhibition due to manganese dioxide precipitation during permanganate injection are included in the model. The DNAPL source area is divided into multiple treatment zones with different areas, depths, and contaminant masses based on site characterization data. The performance model is coupled with a cost module that involves a set of unit costs representing specific fixed and operating costs. Monitoring of groundwater and/or soil concentrations in each treatment zone is employed to assess ISCO performance and make real-time decisions on oxidant reinjection or ISCO termination. Key ISCO design variables include the oxidant concentration to be injected, time to begin performance monitoring, groundwater and/or soil contaminant concentrations to trigger reinjection or terminate ISCO, number of monitoring wells or geoprobe locations per treatment zone, number of samples per sampling event and location, and monitoring frequency. Design variables for each treatment zone may be optimized to minimize expected cost over a set of Monte Carlo simulations that consider uncertainty in site parameters. The model is incorporated in the Stochastic Cost Optimization Toolkit (SCOToolkit) program, which couples the ISCO model with a dissolved plume transport model and with modules for other remediation strategies. An example problem is presented that illustrates design tradeoffs required to deal with characterization and monitoring uncertainty. Monitoring soil concentration changes during ISCO

Customizable Generation of Synthetically Accessible, Local Chemical Subspaces.

Science.gov (United States)

Pottel, Joshua; Moitessier, Nicolas

2017-03-27

Screening large libraries of chemicals has been an efficient strategy to discover bioactive compounds; however a portion of the potential for success is limited to the available libraries. Synergizing combinatorial and computational chemistries has emerged as a time-efficient strategy to explore the chemical space more widely. Ideally, streamlining the evaluation process for larger, feasible chemical libraries would become commonplace. Thus, combinatorial tools and, for example, docking methods would be integrated to identify novel bioactive entities. The idea is simple in nature, but much more complex in practice; combinatorial chemistry is more than the coupling of chemicals into products: synthetic feasibility includes chemoselectivity, stereoselectivity, protecting group chemistry, and chemical availability which must all be considered for combinatorial library design. In addition, intuitive interfaces and simple user manipulation is key for optimal use of such tools by organic chemists-crucial for the integration of such software in medicinal chemistry laboratories. We present herein Finders and React2D-integrated into the Virtual Chemist platform, a modular software suite. This approach enhances virtual combinatorial chemistry by identifying available chemicals compatible with a user-defined chemical transformation and by carrying out the reaction leading to libraries of realistic, synthetically accessible chemicals-all with a completely automated, black-box, and efficient design. We demonstrate its utility by generating ∼40 million synthetically accessible, stereochemically accurate compounds from a single library of 100 000 purchasable molecules and 56 well-characterized chemical reactions.

Development of a theory-guided pan-European computer-assisted safer sex intervention.

Science.gov (United States)

Nöstlinger, Christiana; Borms, Ruth; Dec-Pietrowska, Joanna; Dias, Sonia; Rojas, Daniela; Platteau, Tom; Vanden Berghe, Wim; Kok, Gerjo

2016-12-01

HIV is a growing public health problem in Europe, with men-having-sex-with-men and migrants from endemic regions as the most affected key populations. More evidence on effective behavioral interventions to reduce sexual risk is needed. This article describes the systematic development of a theory-guided computer-assisted safer sex intervention, aiming at supporting people living with HIV in sexual risk reduction. We applied the Intervention Mapping (IM) protocol to develop this counseling intervention in the framework of a European multicenter study. We conducted a needs assessment guided by the information-motivation-behavioral (IMB) skills model, formulated change objectives and selected theory-based methods and practical strategies, i.e. interactive computer-assisted modules as supporting tools for provider-delivered counseling. Theoretical foundations were the IMB skills model, social cognitive theory and the transtheoretical model, complemented by dual process models of affective decision making to account for the specifics of sexual behavior. The counseling approach for delivering three individual sessions was tailored to participants' needs and contexts, adopting elements of motivational interviewing and cognitive-behavioral therapy. We implemented and evaluated the intervention using a randomized controlled trial combined with a process evaluation. IM provided a useful framework for developing a coherent intervention for heterogeneous target groups, which was feasible and effective across the culturally diverse settings. This article responds to the need for transparent descriptions of the development and content of evidence-based behavior change interventions as potential pillars of effective combination prevention strategies. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

IMCO: Making the seas safer and cleaner

International Nuclear Information System (INIS)

1979-01-01

Since 1959, when the IMCO Assembly met for the first time, the Organization has had two main objectives: the introduction of measures designed to improve safety at sea and to prevent pollution of the sea from ships. But during its twenty-year history IMCO has also adopted a number of Conventions and other measures which are aimed specifically at tankers and the problem of pollution. The 1954 Oil Pollution Convention (for which IMCO became depositary in 1959) was the first major attempt by the maritime nations to curb the impact of oil pollution, but since then the problem has become even more serious today The amount of oil carried by sea has risen by 700 per cent in 20 years - to around 1,700 million tons. The world tanker fleet has increased from 37 million deadweight tons in 1954 to around 340 million deadweight tons today, and the size of the tankers themselves has also grown amazingly. The second Convention deals with liability of the ship or cargo owner for damage suffered as a result of an oil pollution casualty. The Convention is intended to ensure that adequate compensation is available to victims and places the liability for the damage on the shipowner. As a result, another Conference was convened by IMCO in 1971 which resulted in the adoption of a Convention establishing the International Fund for Compensation for Oil Pollution Damage The Convention came into force in 1978 and the Fund has now been established with its headquarters in London These three Conventions all deal with what one might call the legal aspects of oil pollution. But the continuing boom in the transportation of oil showed that more work needed to be done on the technical side as well: the scale of oil pollution was so great in some areas that there was serious concern for the marine environment, not only as a result of accidents but through normal tanker operations, notably the cleaning of cargo tanks. In 1973 a major conference was called to discuss the whole problem of marine

The determination of the chemical composition profile of the GaAs/AlGaAs heterostructures designed for quantum cascade lasers by means of synchrotron radiation

International Nuclear Information System (INIS)

Gaca, Jaroslaw; Wojcik, Marek; Bugajski, Maciej; Kosiel, Kamil

2011-01-01

The chemical composition profile of the GaAs/AlGaAs quantum cascade structures grown on (0 0 1) GaAs substrate by molecular beam epitaxy is studied by a synchrotron radiation high-resolution X-ray diffraction. The analysis is carried out for the whole structure as well for its parts. In order to determine some structural parameters, such as: the thickness and chemical composition of each layer making up the investigated structure, the profile of the interface between succeeding layers, and the preservation of the structure periodicity, the experimental X-ray diffraction profiles are compared with simulated ones calculated by means of Darwin dynamical theory of X-ray diffraction. It is shown that this method gives correct chemical composition profiles and allows for the evaluation of the deviations from the designed values of the structural parameters in most investigated cases. Limits of the method are discussed, especially by the determination of the chemical composition profile for thin heterostructures, such as those making active or injector regions.

Biogenesis of nanoparticles: A review | Bansal | African Journal of ...

African Journals Online (AJOL)

Advancement in nanotechnology mainly depends upon advancement in nanomaterial. There are many chemical routes known to use toxic chemicals for synthesis of nanoparticles but the need of the hour is to use environmental benign, greener and safer routes. Researchers are looking to use various living organisms as ...

Heat Exchanger Lab for Chemical Engineering Undergraduates

Science.gov (United States)

Rajala, Jonathan W.; Evans, Edward A.; Chase, George G.

2015-01-01

Third year chemical engineering undergraduate students at The University of Akron designed and fabricated a heat exchanger for a stirred tank as part of a Chemical Engineering Laboratory course. The heat exchanger portion of this course was three weeks of the fifteen week long semester. Students applied concepts of scale-up and dimensional…