WorldWideScience

Sample records for design tools mapping

  1. Geo-environmental mapping tool applied to pipeline design

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Karina de S.; Calle, Jose A.; Gil, Euzebio J. [Geomecanica S/A Tecnologia de Solo Rochas e Materiais, Rio de Janeiro, RJ (Brazil); Sare, Alexandre R. [Geomechanics International Inc., Houston, TX (United States); Soares, Ana Cecilia [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2009-07-01

    The Geo-Environmental Mapping is an improvement of the Geological-Geotechnical Mapping used for basic pipeline designs. The main purpose is to assembly the environmental, geotechnical and geological concepts in a methodological tool capable to predict constrains and reduce the pipeline impact to the environment. The Geo-Environmental mapping was built to stress the influence of soil/structure interaction, related to the physical effect that comes from the contact between structures and soil or rock. A Geological-Geotechnical-Environmental strip (chart) was presented to emphasize the pipeline operational constrains and its influence to the environment. The mapping was developed to clearly show the occurrence and properties of geological materials divided into geotechnical domain units (zones). The strips present construction natural properties, such as: excavability, stability of the excavation and soil re-use capability. Also, the environmental constrains were added to the geological-geotechnical mapping. The Geo-Environmental Mapping model helps the planning of the geotechnical and environmental inquiries to be carried out during executive design, the discussion on the types of equipment to be employed during construction and the analysis of the geological risks and environmental impacts to be faced during the built of the pipeline. (author)

  2. Mapping Medicare Disparities Tool

    Data.gov (United States)

    U.S. Department of Health & Human Services — The CMS Office of Minority Health has designed an interactive map, the Mapping Medicare Disparities Tool, to identify areas of disparities between subgroups of...

  3. Recovery Action Mapping Tool

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Recovery Action Mapping Tool is a web map that allows users to visually interact with and query actions that were developed to recover species listed under the...

  4. Design tools

    Science.gov (United States)

    Anton TenWolde; Mark T. Bomberg

    2009-01-01

    Overall, despite the lack of exact input data, the use of design tools, including models, is much superior to the simple following of rules of thumbs, and a moisture analysis should be standard procedure for any building envelope design. Exceptions can only be made for buildings in the same climate, similar occupancy, and similar envelope construction. This chapter...

  5. Tools for mapping ecosystem services

    Science.gov (United States)

    Palomo, Ignacio; Adamescu, Mihai; Bagstad, Kenneth J.; Cazacu, Constantin; Klug, Hermann; Nedkov, Stoyan; Burkhard, Benjamin; Maes, Joachim

    2017-01-01

    Mapping tools have evolved impressively in recent decades. From early computerised mapping techniques to current cloud-based mapping approaches, we have witnessed a technological evolution that has facilitated the democratisation of Geographic Information

  6. Concept Maps as Instructional Tools for Improving Learning of Phase Transitions in Object-Oriented Analysis and Design

    Science.gov (United States)

    Shin, Shin-Shing

    2016-01-01

    Students attending object-oriented analysis and design (OOAD) courses typically encounter difficulties transitioning from requirements analysis to logical design and then to physical design. Concept maps have been widely used in studies of user learning. The study reported here, based on the relationship of concept maps to learning theory and…

  7. Neighborhood Mapping Tool

    Data.gov (United States)

    Department of Housing and Urban Development — This tool assists the public and Choice Neighborhoods applicants to prepare data to submit with their grant application by allowing applicants to draw the exact...

  8. Effectiveness of Adaptive Concept Maps for Promoting Conceptual Understanding: Findings from a Design-Based Case Study of a Learner-Centered Tool

    Science.gov (United States)

    Moore, Jacob; Williams, Christopher B.; North, Christopher; Johri, Aditya; Paretti, Marie

    2015-01-01

    Traditional instructional materials such as textbooks contain significant educational content, but the navigational mechanisms to access that content are limited and, more importantly, not designed with learning in mind. To address this gap, we present the Adaptive Map, a novel organization and navigation tool designed to help students better…

  9. Useful design tools?

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole

    2005-01-01

    vague and contested concept of sustainability into concrete concepts and building projects. It describes a typology of tools: process tools, impact assessment tools, multi-criteria tools and tools for monitoring. It includes a Danish paradigmatic case study of stakeholder participation in the planning...... of a new sustainable settlement. The use of design tools is discussed in relation to innovation and stakeholder participation, and it is stressed that the usefulness of design tools is context dependent....

  10. Globes, Maps, Photographs: Geographic Tools.

    Science.gov (United States)

    McDermott, Paul D.; And Others

    This compilation of reprinted articles that originally appeared in the Journal of Geography from September 1969 through the May 1970 issues, is intended to help teachers use globes, maps, and photographs with skill and understanding. The articles were designed with several objectives in mind: 1) to provide information regarding the design,…

  11. A Mapping of Tools for Informing Water Sensitive Urban Design Planning Decisions—Questions, Aspects and Context Sensitivity

    Directory of Open Access Journals (Sweden)

    Sara Maria Lerer

    2015-03-01

    Full Text Available Water Sensitive Urban Design (WSUD poses new challenges for decision makers compared with traditional stormwater management, e.g., because WSUD offers a larger selection of measures and because many measures are multifunctional. These challenges have motivated the development of many decision support tools. This review shows that the tools differ in terms of the types of questions they can assist in answering. We identified three main groups: “How Much”-tools, “Where”-tools and “Which”-tools. The “How Much”-tools can further be grouped into tools quantifying hydraulic impacts, hydrologic impacts, water quality impacts, non-flow-related impacts and economic impacts. Additionally, the tools differ in terms of how many aspects of water they address, from those focused only on bio-physical aspects to those attempting to find the best WSUD based on multiple criteria. Finally, we suggest that variability among the tools can partly be explained by variability in local context including conditions such as type of existing stormwater systems, groundwater conditions and legislative frameworks.

  12. Learning Design Tools

    NARCIS (Netherlands)

    Griffiths, David; Blat, Josep; Garcia, Rocío; Vogten, Hubert; Kwong, KL

    2005-01-01

    Griffiths, D., Blat, J., Garcia, R., Vogten, H. & Kwong, KL. (2005). Learning Design Tools. In: Koper, R. & Tattersall, C., Learning Design: A Handbook on Modelling and Delivering Networked Education and Training (pp. 109-136). Berlin-Heidelberg: Springer Verlag.

  13. Developing a mapping tool for tablets

    Science.gov (United States)

    Vaughan, Alan; Collins, Nathan; Krus, Mike

    2014-05-01

    Digital field mapping offers significant benefits when compared with traditional paper mapping techniques in that it provides closer integration with downstream geological modelling and analysis. It also provides the mapper with the ability to rapidly integrate new data with existing databases without the potential degradation caused by repeated manual transcription of numeric, graphical and meta-data. In order to achieve these benefits, a number of PC-based digital mapping tools are available which have been developed for specific communities, eg the BGS•SIGMA project, Midland Valley's FieldMove®, and a range of solutions based on ArcGIS® software, which can be combined with either traditional or digital orientation and data collection tools. However, with the now widespread availability of inexpensive tablets and smart phones, a user led demand for a fully integrated tablet mapping tool has arisen. This poster describes the development of a tablet-based mapping environment specifically designed for geologists. The challenge was to deliver a system that would feel sufficiently close to the flexibility of paper-based geological mapping while being implemented on a consumer communication and entertainment device. The first release of a tablet-based geological mapping system from this project is illustrated and will be shown as implemented on an iPad during the poster session. Midland Valley is pioneering tablet-based mapping and, along with its industrial and academic partners, will be using the application in field based projects throughout this year and will be integrating feedback in further developments of this technology.

  14. Design mentoring tool.

    Science.gov (United States)

    2011-01-01

    In 2004 a design engineer on-line mentoring tool was developed and implemented The purpose of the tool was to assist senior engineers : mentoring new engineers to the INDOT design process and improve their technical competency. This approach saves se...

  15. OOTW Force Design Tools

    Energy Technology Data Exchange (ETDEWEB)

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  16. Assembly tool design

    International Nuclear Information System (INIS)

    Kanamori, Naokazu; Nakahira, Masataka; Ohkawa, Yoshinao; Tada, Eisuke; Seki, Masahiro

    1996-06-01

    The reactor core of the International Thermonuclear Experimental Reactor (ITER) is assembled with a number of large and asymmetric components within a tight tolerance in order to assure the structural integrity for various loads and to provide the tritium confinement. In addition, the assembly procedure should be compatible with remote operation since the core structures will be activated by 14-MeV neutrons once it starts operation and thus personal access will be prohibited. Accordingly, the assembly procedure and tool design are quite essential and should be designed from the beginning to facilitate remote operation. According to the ITER Design Task Agreement, the Japan Atomic Energy Research Institute (JAERI) has performed design study to develop the assembly procedures and associated tool design for the ITER tokamak assembly. This report describes outlines of the assembly tools and the remaining issues obtained in this design study. (author)

  17. New Conceptual Design Tools

    DEFF Research Database (Denmark)

    Pugnale, Alberto; Holst, Malene Kirstine; Kirkegaard, Poul Henning

    2010-01-01

    hand, the main software houses are trying to introduce powerful and effective user-friendly applications in the world of building designers, that are more and more able to fit their specific requirements; on the other hand, some groups of expert users with a basic programming knowledge seem to deal......This paper aims to discuss recent approaches in using more and more frequently computer tools as supports for the conceptual design phase of the architectural project. The present state-of-the-art about software as conceptual design tool could be summarized in two parallel tendencies. On the one...... with the problem of software as conceptual design tool by means of 'scripting', in other words by self-developing codes able to solve specific and well defined design problems. Starting with a brief historical recall and the discussion of relevant researches and practical experiences, this paper investigates...

  18. Medicare Part D Opioid Drug Mapping Tool

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Medicare Part D opioid prescribing mapping tool is an interactive tool that shows geographic comparisons, at the state, county, and ZIP code levels, of...

  19. Using Digital Mapping Tool in Ill-Structured Problem Solving

    Science.gov (United States)

    Bai, Hua

    2013-01-01

    Scaffolding students' problem solving and helping them to improve problem solving skills are critical in instructional design courses. This study investigated the effects of students' uses of a digital mapping tool on their problem solving performance in a design case study. It was found that the students who used the digital mapping tool…

  20. Making maps a visual guide to map design for GIS

    CERN Document Server

    Krygier, John

    2016-01-01

    Lauded for its accessibility and beautiful design, this text has given thousands of students and professionals the tools to create effective, compelling maps. Using a wealth of illustrations--with 74 in full color--to elucidate each concisely presented point, the revised and updated third edition continues to emphasize how design choices relate to the reasons for making a map and its intended purpose. All components of map making are covered: titles, labels, legends, visual hierarchy, font selection, how to turn phenomena into visual data, data organization, symbolization, and more. Innovative

  1. a comparative survey on mind mapping tools

    Directory of Open Access Journals (Sweden)

    Avgoustos A. TSINAKOS

    2009-07-01

    Full Text Available Mind Mapping is an important technique that improves the way you takes notes, and enhances your creative problem solving. By using Mind Maps, you can quickly identify and understand the structure of a subject and the way that pieces of information fit together, as well as recording the raw facts contained in normal notes. It can also be used as complementary tools for knowledge construction and sharing. Their suitability as a pedagogical tool for education, e-learning and training, increases their importance. Also, in a world of information overload and businesses struggling to keep up with the place of change, knowledge workers need effective tools to organize, analyze, brainstorm and collaborate on ideas. In resent years, a wide variety of mind mapping software tools have been developed. An often question that comes up, due to this plethora of software tools, is “which is the best mind mapping software?” Anyone who gives you an immediate answer either knows you and your mind mapping activities very well or their answer in not worth a lot. The “best” depends so much on how you use mind maps. In this paper we are trying to investigate different user profiles and to identify various axes for comparison among mind mapping tools that are suitable for a specific user profile, describe each axis and then analyze each tool.

  2. Remediating a design tool

    DEFF Research Database (Denmark)

    Jensen, Mads Møller; Rädle, Roman; Klokmose, Clemens N.

    2018-01-01

    digital sticky notes setup. The paper contributes with a nuanced understanding of what happens when remediating a physical design tool into digital space, by emphasizing focus shifts and breakdowns caused by the technology, but also benefits and promises inherent in the digital media. Despite users......' preference for creating physical notes, handling digital notes on boards was easier and the potential of proper documentation make the digital setup a possible alternative. While the analogy in our remediation supported a transfer of learned handling, the users' experiences across technological setups impact......Sticky notes are ubiquitous in design processes because of their tangibility and ease of use. Yet, they have well-known limitations in professional design processes, as documentation and distribution are cumbersome at best. This paper compares the use of sticky notes in ideation with a remediated...

  3. System of automated map design

    International Nuclear Information System (INIS)

    Ponomarjov, S.Yu.; Rybalko, S.I.; Proskura, N.I.

    1992-01-01

    Preprint 'System of automated map design' contains information about the program shell for construction of territory map, performing level line drawing of arbitrary two-dimension field (in particular, the radionuclide concentration field). The work schedule and data structures are supplied, as well as data on system performance. The preprint can become useful for experts in radioecology and for all persons involved in territory pollution mapping or multi-purpose geochemical mapping. (author)

  4. RISK COMMUNICATION IN ACTION: THE TOOLS OF MESSAGE MAPPING

    Science.gov (United States)

    Risk Communication in Action: The Tools of Message Mapping, is a workbook designed to guide risk communicators in crisis situations. The first part of this workbook will review general guidelines for risk communication. The second part will focus on one of the most robust tools o...

  5. Tool and Fixture Design

    Energy Technology Data Exchange (ETDEWEB)

    Graham, Mark W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-07-28

    In a manufacturing process, a need is identified and a product is created to fill this need. While design and engineering of the final product is important, the tools and fixtures that aid in the creation of the final product are just as important, if not more so. Power supplies assembled at the TA-55 PF-5 have been designed by an excellent engineering team. The task in PF-5 now is to ensure that all steps of the assembly and manufacturing process can be completed safely, reliably, and in a quality repeatable manner. One of these process steps involves soldering fine wires to an electrical connector. During the process development phase, the method of soldering included placing the power supply in a vice in order to manipulate it into a position conducive to soldering. This method is unacceptable from a reliability, repeatability, and ergonomic standpoint. To combat these issues, a fixture was designed to replace the current method. To do so, a twelve step engineering design process was used to create the fixture that would provide a solution to a multitude of problems, and increase the safety and efficiency of production.

  6. A Mapping of Tools for Informing Water Sensitive Urban Design Planning Decisions—Questions, Aspects and Context Sensitivity

    DEFF Research Database (Denmark)

    Lerer, Sara Maria; Arnbjerg-Nielsen, Karsten; Mikkelsen, Peter Steen

    2015-01-01

    Water Sensitive Urban Design (WSUD) poses new challenges for decision makers compared with traditional stormwater management, e.g., because WSUD offers a larger selection of measures and because many measures are multifunctional. These challenges have motivated the development of many decision...

  7. EPR design tools. Integrated data processing tools

    International Nuclear Information System (INIS)

    Kern, R.

    1997-01-01

    In all technical areas, planning and design have been supported by electronic data processing for many years. New data processing tools had to be developed for the European Pressurized Water Reactor (EPR). The work to be performed was split between KWU and Framatome and laid down in the Basic Design contract. The entire plant was reduced to a logical data structure; the circuit diagrams and flowsheets of the systems were drafted, the central data pool was established, the outlines of building structures were defined, the layout of plant components was planned, and the electrical systems were documented. Also building construction engineering was supported by data processing. The tasks laid down in the Basic Design were completed as so-called milestones. Additional data processing tools also based on the central data pool are required for the phases following after the Basic Design phase, i.e Basic Design Optimization; Detailed Design; Management; Construction, and Commissioning. (orig.) [de

  8. Design mentoring tool : [technical summary].

    Science.gov (United States)

    2011-01-01

    In 2004 a design engineer on-line mentoring tool was developed and implemented The purpose of the tool was to assist senior engineers mentoring new engineers to the INDOT design process and improve their technical competency. This approach saves seni...

  9. Seismicity map tools for earthquake studies

    Science.gov (United States)

    Boucouvalas, Anthony; Kaskebes, Athanasios; Tselikas, Nikos

    2014-05-01

    We report on the development of new and online set of tools for use within Google Maps, for earthquake research. We demonstrate this server based and online platform (developped with PHP, Javascript, MySQL) with the new tools using a database system with earthquake data. The platform allows us to carry out statistical and deterministic analysis on earthquake data use of Google Maps and plot various seismicity graphs. The tool box has been extended to draw on the map line segments, multiple straight lines horizontally and vertically as well as multiple circles, including geodesic lines. The application is demonstrated using localized seismic data from the geographic region of Greece as well as other global earthquake data. The application also offers regional segmentation (NxN) which allows the studying earthquake clustering, and earthquake cluster shift within the segments in space. The platform offers many filters such for plotting selected magnitude ranges or time periods. The plotting facility allows statistically based plots such as cumulative earthquake magnitude plots and earthquake magnitude histograms, calculation of 'b' etc. What is novel for the platform is the additional deterministic tools. Using the newly developed horizontal and vertical line and circle tools we have studied the spatial distribution trends of many earthquakes and we here show for the first time the link between Fibonacci Numbers and spatiotemporal location of some earthquakes. The new tools are valuable for examining visualizing trends in earthquake research as it allows calculation of statistics as well as deterministic precursors. We plan to show many new results based on our newly developed platform.

  10. Design of tool monitor simulator

    International Nuclear Information System (INIS)

    Yao Yonggang; Deng Changming; Zhang Jia; Meng Dan; Zhang Lu; Wang Zhi'ai; Shen Yang

    2011-01-01

    It is based on tool monitor in Qinshan Nuclear Power Plant for the object of study, and manufacture a tool monitor simulator. The device is designed to automatically emulate-monitor the contamination level of objects for training students. Once if the tool monitor reports the contamination, the students can handle properly. The brief introduction of main function and system design of the simulator are presented in the paper. (authors)

  11. Computational Design Tools for Integrated Design

    DEFF Research Database (Denmark)

    Holst, Malene Kirstine; Kirkegaard, Poul Henning

    2010-01-01

    In an architectural conceptual sketching process, where an architect is working with the initial ideas for a design, the process is characterized by three phases: sketching, evaluation and modification. Basically the architect needs to address three areas in the conceptual sketching phase......: aesthetical, functional and technical requirements. The aim of the present paper is to address the problem of a vague or not existing link between digital conceptual design tools used by architects and designers and engineering analysis and simulation tools. Based on an analysis of the architectural design...... process different digital design methods are related to tasks in an integrated design process....

  12. Design of parametric software tools

    DEFF Research Database (Denmark)

    Sabra, Jakob Borrits; Mullins, Michael

    2011-01-01

    The studies investigate the field of evidence-based design used in architectural design practice and propose a method using 2D/3D CAD applications to: 1) enhance integration of evidence-based design knowledge in architectural design phases with a focus on lighting and interior design and 2) assess...... fulfilment of evidence-based design criterion regarding light distribution and location in relation to patient safety in architectural health care design proposals. The study uses 2D/3D CAD modelling software Rhinoceros 3D with plug-in Grasshopper to create parametric tool prototypes to exemplify...... the operations and functions of the design method. To evaluate the prototype potentials, surveys with architectural and healthcare design companies are conducted. Evaluation is done by the administration of questionnaires being part of the development of the tools. The results show that architects, designers...

  13. Design of a Cognitive Tool to Enhance Problemsolving Performance

    Science.gov (United States)

    Lee, Youngmin; Nelson, David

    2005-01-01

    The design of a cognitive tool to support problem-solving performance for external representation of knowledge is described. The limitations of conventional knowledge maps are analyzed in proposing the tool. The design principles and specifications are described. This tool is expected to enhance learners problem-solving performance by allowing…

  14. GIS cartography a guide to effective map design

    CERN Document Server

    Peterson, Gretchen N

    2009-01-01

    Maps, either printed or digital, can create effective communication with bosses, clients, other scientists, and the public. However, entry level GISers often find that map design was given short shrift in their pre-professional life. It is time for the GIS field, which is maturing in other ways, to improve its skills in this area. Based on the author's more than ten years of research and practice in map design, GIS Cartography: A Guide to Effective Map Design provides the tools to create truly sophisticated maps. Packed full of in-depth information and advice, this book covers all facets of ma

  15. Mapping healthcare systems: a policy relevant analytic tool.

    Science.gov (United States)

    Sekhri Feachem, Neelam; Afshar, Ariana; Pruett, Cristina; Avanceña, Anton L V

    2017-07-01

    In the past decade, an international consensus on the value of well-functioning systems has driven considerable health systems research. This research falls into two broad categories. The first provides conceptual frameworks that take complex healthcare systems and create simplified constructs of interactions and functions. The second focuses on granular inputs and outputs. This paper presents a novel translational mapping tool - the University of California, San Francisco mapping tool (the Tool) - which bridges the gap between these two areas of research, creating a platform for multi-country comparative analysis. Using the Murray-Frenk framework, we create a macro-level representation of a country's structure, focusing on how it finances and delivers healthcare. The map visually depicts the fundamental policy questions in healthcare system design: funding sources and amount spent through each source, purchasers, populations covered, provider categories; and the relationship between these entities. We use the Tool to provide a macro-level comparative analysis of the structure of India's and Thailand's healthcare systems. As part of the systems strengthening arsenal, the Tool can stimulate debate about the merits and consequences of different healthcare systems structural designs, using a common framework that fosters multi-country comparative analyses. © The Author 2017. Published by Oxford University Press on behalf of Royal Society of Tropical Medicine and Hygiene.

  16. Hardmetals - microstructural design, testing and property maps

    Energy Technology Data Exchange (ETDEWEB)

    Roebuck, B; Gee, M G; Morrell, R [NPL Materials Centre, National Physical Laboratory, Teddington, Middlesex (United Kingdom)

    2001-07-01

    The production of WC/Co hardmetals and their analogues is considered a mature technology, however lately there has been new research results where the concept of microstructural design was used to produce alternatives to the conventional two-phase structure. This Industry is currently well served by a range of baseline established standards, which, if properly followed with good attention to correct quality procedures, will ensure consistent products. However, there are certain key properties such as corrosion, fatigue, impact wear or high temperature strength and toughness that are often measured but not always by standard tests methods. Microstructural design potential is reviewed, particularly the possibilities of performance improvement via changes in size, shape and distribution of the phases as well as recent developments in testing, specifically S-N fatigue and abrasive wear. Finally, the concept of property mapping is introduced as a tool for providing a framework for optimizing properties. Its utility in correlating performance properties and their relationships with microstructural parameters is evaluated. Two property maps are discussed: one where the property is plotted against a microstructural feature (microstructure property maps) such as WC grain size or Co binder phase content against coercivity or hardness and one where different properties, such as hardness and toughness are mapped against each other (comparative property maps). (nevyjel)

  17. Hardmetals - microstructural design, testing and property maps

    International Nuclear Information System (INIS)

    Roebuck, B.; Gee, M.G.; Morrell, R.

    2001-01-01

    The production of WC/Co hardmetals and their analogues is considered a mature technology, however lately there has been new research results where the concept of microstructural design was used to produce alternatives to the conventional two-phase structure. This Industry is currently well served by a range of baseline established standards, which, if properly followed with good attention to correct quality procedures, will ensure consistent products. However, there are certain key properties such as corrosion, fatigue, impact wear or high temperature strength and toughness that are often measured but not always by standard tests methods. Microstructural design potential is reviewed, particularly the possibilities of performance improvement via changes in size, shape and distribution of the phases as well as recent developments in testing, specifically S-N fatigue and abrasive wear. Finally, the concept of property mapping is introduced as a tool for providing a framework for optimizing properties. Its utility in correlating performance properties and their relationships with microstructural parameters is evaluated. Two property maps are discussed: one where the property is plotted against a microstructural feature (microstructure property maps) such as WC grain size or Co binder phase content against coercivity or hardness and one where different properties, such as hardness and toughness are mapped against each other (comparative property maps). (nevyjel)

  18. The EPSA Project Finance Mapping Tool

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, Stanton W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Chinthavali, Supriya [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-07-01

    The Energy Policy and Systems Analysis Office of DOE has requested a tool to compare the impact of various Federal policies on the financial viability of generation resources across the country. Policy options could include production tax credits, investment tax credits, solar renewable energy credits, tax abatement, accelerated depreciation, tax-free loans, and others. The tool would model the finances of projects in all fifty states, and possibly other geographic units like utility service territories and RTO/ISO territories. The tool would consider the facility s cost, financing, production, and revenues under different capital and market structures to determine things like levelized cost of energy, return on equity, and cost impacts on others (e.g., load-serving entities, society.) The tool would compare the cost and value of the facility to the local regional alternatives to determine how and where policy levers may provide sufficient incremental value to motivate investment. The results will be displayed through a purpose-built visualization that maps geographic variations and shows associated figures and tables.

  19. Analytic transfer maps for Lie algebraic design codes

    International Nuclear Information System (INIS)

    van Zeijts, J.; Neri, F.; Dragt, A.J.

    1990-01-01

    Lie algebraic methods provide a powerful tool for modeling particle transport through Hamiltonian systems. Briefly summarized, Lie algebraic design codes work as follows: first the time t flow generated by a Hamiltonian system is represented by a Lie algebraic map acting on the initial conditions. Maps are generated for each element in the lattice or beamline under study. Next all these maps are concatenated into a one-turn or one-pass map that represents the complete dynamics of the system. Finally, the resulting map is analyzed and design decisions are made based on the linear and nonlinear entries in the map. The authors give a short description of how to find Lie algebraic transfer maps in analytic form, for inclusion in accelerator design codes. As an example they find the transfer map, through third order, for the combined-function quadrupole magnet, and use such magnets to correct detrimental third-order aberrations in a spot forming system

  20. Hybrid Design Tools Intuit Interaction

    NARCIS (Netherlands)

    Wendrich, Robert E.; Kyvsgaard Hansen, P.; Rasmussen, J.; Jorgensen, K.A.; Tollestrup, C.

    2012-01-01

    Non-linear, non-explicit, non-standard thinking and ambiguity in design tools has a great impact on enhancement of creativity during ideation and conceptualization. Tacit-tangible representation based on a mere idiosyncratic and individual approach combined with computational assistance allows the

  1. Designing a Multichannel Map Service Concept

    Directory of Open Access Journals (Sweden)

    Hanna-Marika Halkosaari

    2013-01-01

    Full Text Available This paper introduces a user-centered design process for developing a multichannel map service. The aim of the service is to provide hikers with interactive maps through several channels. In a multichannel map service, the same spatial information is available through various channels, such as printed maps, Web maps, mobile maps, and other interactive media. When properly networked, the channels share a uniform identity so that the user experiences the different channels as a part of a single map service. The traditional methods of user-centered design, such as design probes, personas, and scenarios, proved useful even in the emerging field of developing multichannel map services. The findings emphasize the need to involve users and multidisciplinary teams in the conceptual phases of designing complex services aimed at serving various kinds of users.

  2. Mapping as a visual health communication tool: promises and dilemmas.

    Science.gov (United States)

    Parrott, Roxanne; Hopfer, Suellen; Ghetian, Christie; Lengerich, Eugene

    2007-01-01

    In the era of evidence-based public health promotion and planning, the use of maps as a form of evidence to communicate about the multiple determinants of cancer is on the rise. Geographic information systems and mapping technologies make future proliferation of this strategy likely. Yet disease maps as a communication form remain largely unexamined. This content analysis considers the presence of multivariate information, credibility cues, and the communication function of publicly accessible maps for cancer control activities. Thirty-six state comprehensive cancer control plans were publicly available in July 2005 and were reviewed for the presence of maps. Fourteen of the 36 state cancer plans (39%) contained map images (N = 59 static maps). A continuum of map inter activity was observed, with 10 states having interactive mapping tools available to query and map cancer information. Four states had both cancer plans with map images and interactive mapping tools available to the public on their Web sites. Of the 14 state cancer plans that depicted map images, two displayed multivariate data in a single map. Nine of the 10 states with interactive mapping capability offered the option to display multivariate health risk messages. The most frequent content category mapped was cancer incidence and mortality, with stage at diagnosis infrequently available. The most frequent communication function served by the maps reviewed was redundancy, as maps repeated information contained in textual forms. The social and ethical implications for communicating about cancer through the use of visual geographic representations are discussed.

  3. BikeMaps.org: A Global Tool for Collision and Near Miss Mapping.

    Science.gov (United States)

    Nelson, Trisalyn A; Denouden, Taylor; Jestico, Benjamin; Laberee, Karen; Winters, Meghan

    2015-01-01

    There are many public health benefits to cycling, such as chronic disease reduction and improved air quality. Real and perceived concerns about safety are primary barriers to new ridership. Due to limited forums for official reporting of cycling incidents, lack of comprehensive data is limiting our ability to study cycling safety and conduct surveillance. Our goal is to introduce BikeMaps.org, a new website developed by the authors for crowd-source mapping of cycling collisions and near misses. BikeMaps.org is a global mapping system that allows citizens to map locations of cycling incidents and report on the nature of the event. Attributes collected are designed for spatial modeling research on predictors of safety and risk, and to aid surveillance and planning. Released in October 2014, within 2 months the website had more than 14,000 visitors and mapping in 14 countries. Collisions represent 38% of reports (134/356) and near misses 62% (222/356). In our pilot city, Victoria, Canada, citizens mapped data equivalent to about 1 year of official cycling collision reports within 2 months via BikeMaps.org. Using report completeness as an indicator, early reports indicate that data are of high quality with 50% being fully attributed and another 10% having only one missing attribute. We are advancing this technology, with the development of a mobile App, improved data visualization, real-time altering of hazard reports, and automated open-source tools for data sharing. Researchers and citizens interested in utilizing the BikeMaps.org technology can get involved by encouraging citizen mapping in their region.

  4. Concept Mapping Using Cmap Tools to Enhance Meaningful Learning

    Science.gov (United States)

    Cañas, Alberto J.; Novak, Joseph D.

    Concept maps are graphical tools that have been used in all facets of education and training for organizing and representing knowledge. When learners build concept maps, meaningful learning is facilitated. Computer-based concept mapping software such as CmapTools have further extended the use of concept mapping and greatly enhanced the potential of the tool, facilitating the implementation of a concept map-centered learning environment. In this chapter, we briefly present concept mapping and its theoretical foundation, and illustrate how it can lead to an improved learning environment when it is combined with CmapTools and the Internet. We present the nationwide “Proyecto Conéctate al Conocimiento” in Panama as an example of how concept mapping, together with technology, can be adopted by hundreds of schools as a means to enhance meaningful learning.

  5. MapFactory - Towards a mapping design pattern for big geospatial data

    Science.gov (United States)

    Rautenbach, Victoria; Coetzee, Serena

    2018-05-01

    With big geospatial data emerging, cartographers and geographic information scientists have to find new ways of dealing with the volume, variety, velocity, and veracity (4Vs) of the data. This requires the development of tools that allow processing, filtering, analysing, and visualising of big data through multidisciplinary collaboration. In this paper, we present the MapFactory design pattern that will be used for the creation of different maps according to the (input) design specification for big geospatial data. The design specification is based on elements from ISO19115-1:2014 Geographic information - Metadata - Part 1: Fundamentals that would guide the design and development of the map or set of maps to be produced. The results of the exploratory research suggest that the MapFactory design pattern will help with software reuse and communication. The MapFactory design pattern will aid software developers to build the tools that are required to automate map making with big geospatial data. The resulting maps would assist cartographers and others to make sense of big geospatial data.

  6. Mind Maps as a Lifelong Learning Tool

    Science.gov (United States)

    Erdem, Aliye

    2017-01-01

    Mind map, which was developed by Tony Buzan as a note-taking technique, is an application which has the power of uncovering the thoughts which the brain has about a subject from different viewpoints and which activate the right and left lobes of the brain together as an alternative to linear thought. It is known that mind maps have benefits such…

  7. GOKaRT: Graphical Online Search Tool for Maps

    Directory of Open Access Journals (Sweden)

    Mechthild Schüler

    2008-09-01

    Full Text Available The map department of the Staats- und Universitätsbibliothek Göttingen together with the Berlin State Library propose a project to develop a web-based graphic cataloguing and search system for maps, to be funded by the German Research Foundation. This tool shall be made available to all map holdings in archives, libraries, university departments and museums in Germany as a comfortable means for the administration of map holdings and as a search tool. Sheets belonging to map series as well as single maps (old and new will be registered cooperatively by the participants with simple tools. This cooperation in data maintenance will facilitate the work especially for understaffed map holdings. Depending on the type of map there are four different mechanisms for map reference. For map series electronic index sheets are used which will show information regarding the various issues of the map sheets. Due to the intuitive graphic search entry GOKaRT-users will easily find the required maps of a certain region available in a chosen holding. User administration modules ensure comfortable handling. GOKaRT is being developed on the basis of licence-free open source programmes. In case financing is provided by the German Research Foundation, GOKaRT can be used free of charge internationally. This would require a contract stipulating data exchange between the partners as well as permanent storage and usability of the data.

  8. iMindMap as an Innovative Tool in Teaching and Learning Accounting: An Exploratory Study

    Science.gov (United States)

    Wan Jusoh, Wan Noor Hazlina; Ahmad, Suraya

    2016-01-01

    Purpose: The purpose of this study is to explore the use of iMindMap software as an interactive tool in the teaching and learning method and also to be able to consider iMindMap as an alternative instrument in achieving the ultimate learning outcome. Design/Methodology/Approach: Out of 268 students of the management accounting at the University of…

  9. Altitude Compensating Nozzle Design Tool, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Launch vehicle subsystem preliminary design tools that are fast, accurate, and seamlessly integrated into an electronic design and optimization environment have...

  10. Self-organizing maps: A tool to ascertain taxonomic relatedness ...

    Indian Academy of Sciences (India)

    MADHU

    what is known as numerical taxonomy (Garrity et al. 2001). ... Curvilinear component analysis; self-organizing maps; principal component analysis. Abbreviations used: ... This tool undergoes unsupervised learning and is particularly useful in ...

  11. Concept mapping as learning tool in problem-oriented learning

    NARCIS (Netherlands)

    Fürstenau, B.; Kneppers, L.; Sánchez, J.; Cañas, A.J.; Novak, J.D.

    2010-01-01

    In two studies we investigated whether concept mapping or summary writing is more effective in supporting students’ learning from authentic problems in the field of business. We interpret concept mapping and summary writing as elaboration tools aiming at helping students to understand new

  12. Rendering Systems Visible for Design: Synthesis Maps as Constructivist Design Narratives

    Directory of Open Access Journals (Sweden)

    Peter Jones

    Full Text Available Synthesis maps integrate research evidence, system expertise, and design proposals into visual narratives. These narratives support communication and decision-making among stakeholders. Synthesis maps evolved from earlier visualization tools in systemics and design. They help stakeholders to understand design options for complex sociotechnical systems. Other visual approaches map complexity for effective collaboration across perspectives and knowledge domains. These help stakeholder groups to work in higher-order design contexts for sociotechnical or human-ecological systems. This article describes a constructivist pedagogy for collaborative learning in small teams of mixed-discipline designers. Synthesis mapping enables these teams to learn systems methods for design research in complex problem domains. Synthesis maps integrate knowledge from research cycles and iterative sensemaking to define a coherent design narrative. While synthesis maps may include formal system modeling techniques, they do not require them. Synthesis maps tangibly render research observations and design choices. As a hybrid system design method, synthesis maps are a contribution to the design genre of visual systems thinking.

  13. Landmarks selection in street map design

    International Nuclear Information System (INIS)

    Kao, C J

    2014-01-01

    In Taiwan many electrical maps present their landmarks according to the category of the feature, a designer short of knowledge about mental representation of space, can cause the map to lose its communication effects. To resolve this map design problem, in this research through long-term memory recall, navigation and observation, and short-term memory processing 111 participants were asked to select the proper landmark from study area. The results reveal that in Taiwan convenience stores are the most popular local landmark in rural and urban areas. Their commercial signs have a unique design and bright color. Contrasted to their background, this makes the convenience store a salient feature. This study also developed a rule to assess the priority of the landmarks to design them in different scale maps

  14. Landmarks selection in street map design

    Science.gov (United States)

    Kao, C. J.

    2014-02-01

    In Taiwan many electrical maps present their landmarks according to the category of the feature, a designer short of knowledge about mental representation of space, can cause the map to lose its communication effects. To resolve this map design problem, in this research through long-term memory recall, navigation and observation, and short-term memory processing 111 participants were asked to select the proper landmark from study area. The results reveal that in Taiwan convenience stores are the most popular local landmark in rural and urban areas. Their commercial signs have a unique design and bright color. Contrasted to their background, this makes the convenience store a salient feature. This study also developed a rule to assess the priority of the landmarks to design them in different scale maps.

  15. A modern Python interface for the Generic Mapping Tools

    Science.gov (United States)

    Uieda, L.; Wessel, P.

    2017-12-01

    Figures generated by The Generic Mapping Tools (GMT) are present in countless publications across the Earth sciences. The command-line interface of GMT lends the tool its flexibility but also creates a barrier to entry for begginers. Meanwhile, adoption of the Python programming language has grown across the scientific community. This growth is largely due to the simplicity and low barrier to entry of the language and its ecosystem of tools. Thus, it is not surprising that there have been at least three attempts to create Python interfaces for GMT: gmtpy (github.com/emolch/gmtpy), pygmt (github.com/ian-r-rose/pygmt), and PyGMT (github.com/glimmer-cism/PyGMT). None of these projects are currently active and, with the exception of pygmt, they do not use the GMT Application Programming Interface (API) introduced in GMT 5. The two main Python libraries for plotting data on maps are the matplotlib Basemap toolkit (matplotlib.org/basemap) and Cartopy (scitools.org.uk/cartopy), both of which rely on matplotlib (matplotlib.org) as the backend for generating the figures. Basemap is known to have limitations and is being discontinued. Cartopy is an improvement over Basemap but is still bound by the speed and memory constraints of matplotlib. We present a new Python interface for GMT (GMT/Python) that makes use of the GMT API and of new features being developed for the upcoming GMT 6 release. The GMT/Python library is designed according to the norms and styles of the Python community. The library integrates with the scientific Python ecosystem by using the "virtual files" from the GMT API to implement input and output of Python data types (numpy "ndarray" for tabular data and xarray "Dataset" for grids). Other features include an object-oriented interface for creating figures, the ability to display figures in the Jupyter notebook, and descriptive aliases for GMT arguments (e.g., "region" instead of "R" and "projection" instead of "J"). GMT/Python can also serve as a backend

  16. Two-dimensional Value Stream Mapping: Integrating the design of the MPC system in the value stream map

    DEFF Research Database (Denmark)

    Powell, Daryl; Olesen, Peter Bjerg

    2013-01-01

    Companies use value stream mapping to identify waste, often in the early stages of a lean implementation. Though the tool helps users to visualize material and information flows and to identify improvement opportunities, a limitation of this approach is the lack of an integrated method...... for analysing and re-designing the MPC system in order to support lean improvement. We reflect on the current literature regarding value stream mapping, and use practical insights in order to develop and propose a two-dimensional value stream mapping tool that integrates the design of the MPC system within...... the material and information flow map....

  17. Searching for Sentient Design Tools for Game Development

    DEFF Research Database (Denmark)

    Liapis, Antonios

    their generative algorithms) and to their human users (who must take all design decisions), respectively. This thesis argues that computers can be creative partners to human designers rather than mere slaves; game design tools can be aware of designer intentions, preferences and routines, and can accommodate them...... or even subvert them. This thesis presents Sentient Sketchbook, a tool for designing game level abstractions of different game genres, which assists the level designer as it automatically tests maps for playability constraints, evaluates and displays the map's gameplay properties and creates alternatives......Over the last twenty years, computer games have grown from a niche market targeting young adults to an important player in the global economy, engaging millions of people from different cultural backgrounds. As both the number and the size of computer games continue to rise, game companies handle...

  18. Hybrid design tools for conceptual design and design engineering processes: bridging the design gap: towards an intuitive design tool

    NARCIS (Netherlands)

    Wendrich, Robert E.

    2016-01-01

    Hybrid Design Tools; Representation; Computational Synthesis. Non-linear, non-explicit, non-standard thinking and ambiguity in design tools has a great impact on enhancement of creativity during ideation and conceptualization. Tacit-tangible representation based on a mere idiosyncratic and

  19. Design of the ITER Tokamak Assembly Tools

    International Nuclear Information System (INIS)

    Park, Hyunki; Her, Namil; Kim, Byungchul; Im, Kihak; Jung, Kijung; Lee, Jaehyuk; Im, Kisuk

    2006-01-01

    ITER (International Thermonuclear Experimental Reactor) Procurement allocation among the seven Parties, EU, JA, CN, IN , KO, RF and US had been decided in Dec. 2005. ITER Tokamak assembly tools is one of the nine components allocated to Korea for the construction of the ITER. Assembly tools except measurement and common tools are supplied to assemble the ITER Tokamak and classified into 9 groups according to components to be assembled. Among the 9 groups of assembly tools, large-sized Sector Sub-assembly Tools and Sector Assembly Tools are used at the first stage of ITER Tokamak construction and need to be designed faster than seven other assembly tools. ITER IT (International Team) proposed Korea to accomplish ITA (ITER Transitional Arrangements) Task on detailed design, manufacturing feasibility and contract specification of specific, large sized tools such as Upending Tool, Lifting Tool, Sector Sub-assembly Tool and Sector Assembly Tool in Oct. 2004. Based on the concept design by ITER IT, Korea carried out ITA Task on detailed design of large-sized and specific Sector Sub-assembly and Sector Assembly Tools until Mar. 2006. The Sector Sub-assembly Tools mainly consist of the Upending, Lifting, Vacuum Vessel Support and Bracing, and Sector Sub-assembly Tool, among which the design of three tools are herein. The Sector Assembly Tools mainly consist of the Toroidal Field (TF) Gravity Support Assembly, Sector In-pit Assembly, TF Coil Assembly, Vacuum Vessel (VV) Welding and Vacuum Vessel Thermal Shield (TS) Assembly Tool, among which the design of Sector In-pit Assembly Tool is described herein

  20. Design Tools for Integrated Asynchronous Electronic Circuits

    National Research Council Canada - National Science Library

    Martin, Alain

    2003-01-01

    ..., simulation, verification, at the logical and physical levels. Situs has developed a business model for the commercialization of the CAD tools, and has designed the prototype of the tool suite based on this business model and the Caltech approach...

  1. Integrated Radiation Analysis and Design Tools

    Data.gov (United States)

    National Aeronautics and Space Administration — The Integrated Radiation Analysis and Design Tools (IRADT) Project develops and maintains an integrated tool set that collects the current best practices, databases,...

  2. Design for Motivation: Evaluation of a Design Tool

    OpenAIRE

    Chasanidou, Dimitra

    2018-01-01

    Design for motivation constitutes a design practice that focuses on the activation of human motives to perform an action. There is an increasing need to design motivational and engaging mechanisms for voluntary systems, such as innovation platforms, where user participation is a key target. When designing for motivation, a challenge of the early design phases is the selection of appropriate design tool and strategy. The current work presents a design tool, namely DEMO (DEsign for MOtivation),...

  3. Online user tracking and usability tools - a mapping study

    OpenAIRE

    Nyström, Niklas

    2014-01-01

    Tracking user activities online can be done in order to improve systems usability, understand user behaviour or to increase monetary prot, to mention a few things. The software tools for this purpose can vary, for example in terms of usability of the tool itself, features, security, price, accessibility and support options. In this study I have developed a methodology to evaluate a selection of modern tools and map them depending on various properties. I have also analysed learning theories t...

  4. Production engineering jig and tool design

    CERN Document Server

    Jones, E J H

    1972-01-01

    Production Engineering: Jig and Tool Design focuses on jig and tool design as part of production engineering and covers topics ranging from inspection and gauging to multiple and consecutive tooling, tool calculation and development of form tools, deep-hole boring, and grinding-wheel form-crushing. Air and oil operated fixtures, negative rake machining, and the economics of jig and fixture practice are also discussed. This text is comprised of 22 chapters; the first of which provides an overview of the function and organization of the jig and tool department. Attention then turns to the subjec

  5. Developing a Parametric Urban Design Tool

    DEFF Research Database (Denmark)

    Steinø, Nicolai; Obeling, Esben

    2014-01-01

    Parametric urban design is a potentially powerful tool for collaborative urban design processes. Rather than making one- off designs which need to be redesigned from the ground up in case of changes, parametric design tools make it possible keep the design open while at the same time allowing...... for a level of detailing which is high enough to facilitate an understan- ding of the generic qualities of proposed designs. Starting from a brief overview of parametric design, this paper presents initial findings from the development of a parametric urban design tool with regard to developing a structural...... logic which is flexible and expandable. It then moves on to outline and discuss further development work. Finally, it offers a brief reflection on the potentials and shortcomings of the software – CityEngine – which is used for developing the parametric urban design tool....

  6. Performance Evaluation of Java Based Object Relational Mapping Tools

    Directory of Open Access Journals (Sweden)

    Shoaib Mahmood Bhatti

    2013-04-01

    Full Text Available Object persistency is the hot issue in the form of ORM (Object Relational Mapping tools in industry as developers use these tools during software development. This paper presents the performance evaluation of Java based ORM tools. For this purpose, Hibernate, Ebean and TopLinkhave been selected as the ORM tools which are popular and open source. Their performance has been measured from execution point of view. The results show that ORM tools are the good option for the developers considering the system throughput in shorter setbacks and they can be used efficiently and effectively for performing mapping of the objects into the relational dominated world of database, thus creating a hope for a better and well dominated future of this technology.

  7. CRITON : A Hypermedia Design Tool

    NARCIS (Netherlands)

    Avgeriou, Paris; Retalis, Symeon

    2005-01-01

    The WWW has turned into a development and run-time environment for large-scale and complex applications. Such sophisticated applications are being deployed in increasing numbers without having been developed according to appropriate methodologies, tools and quality standards. The reason is not only

  8. SASD-tools for program design

    International Nuclear Information System (INIS)

    Gather, K.S.

    1989-01-01

    An overview of Structured Analysis Structured Design (SASD) methodology is given. Some emphasis is put on the time needed to start in a HEP environment with software design methodologies, and on the motivation for SASD. The need for tools is indicated, and examples of their usefulness in analysis and design steps are discussed. Limitations of certain design methods are indicated and additional tools are briefly discussed. Criteria for the selection of tools to be used in large systems design are discussed, and some attention is given to implications for management structures. (orig.)

  9. Design of the ITER tokamak assembly tools

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hyunki [National Fusion Research Institute, 52 Eoeun-Dong, Yuseong-Gu, Daejon 305-333 (Korea, Republic of)], E-mail: hkpark@nfri.re.kr; Lee, Jaehyuk; Kim, Taehyung [SFA Engineering Corp., 42-7 Palyong-dong, Changwon-si, Gyeongsangnam-do 641-847 (Korea, Republic of); Song, Yunju [National Fusion Research Institute, 52 Eoeun-Dong, Yuseong-Gu, Daejon 305-333 (Korea, Republic of); Im, Kihak [ITER Organization, CEA Cadarasche, 13108 Saint Paul-lez-Durance (France); Kim, Byungchul; Lee, Hyeongon; Jung, Ki-Jung [National Fusion Research Institute, 52 Eoeun-Dong, Yuseong-Gu, Daejon 305-333 (Korea, Republic of)

    2008-12-15

    ITER tokamak assembly is mainly composed of lower cryostat activities, sector sub-assembly, sector assembly, in-vessel activities and ex-vessel activities. The main tools for sector sub-assembly procedures consists of upending tool, sector lifting tool, vacuum vessel support and bracing tool and sector sub-assembly tool. Conceptual design of assembly tools for sector sub-assembly procedures is described herein. The basic structure for upending tool has been developed under the assumption that upending is performed with crane which will be installed in Tokamak building. Sector lifting tool is designed to adjust the position of a sector to minimize the difference between the center of the tokamak building crane and the center of gravity of the sector. Sector sub-assembly tool is composed of special frame for the fine adjustment of position control with 6 degrees of freedom. The design of VV support and bracing tool for four kinds of VV 40 deg. sectors has been developed. Also, structural analysis for upending tool, sector sub-assembly tool has been studied using ANSYS for the situation of an applied load with the same dead weight multiplied by 3/4. The results of structural analyses for these tools were below the allowable values.

  10. Objective and Comprehensive Evaluation of Bisulfite Short Read Mapping Tools

    Directory of Open Access Journals (Sweden)

    Hong Tran

    2014-01-01

    Full Text Available Background. Large-scale bisulfite treatment and short reads sequencing technology allow comprehensive estimation of methylation states of Cs in the genomes of different tissues, cell types, and developmental stages. Accurate characterization of DNA methylation is essential for understanding genotype phenotype association, gene and environment interaction, diseases, and cancer. Aligning bisulfite short reads to a reference genome has been a challenging task. We compared five bisulfite short read mapping tools, BSMAP, Bismark, BS-Seeker, BiSS, and BRAT-BW, representing two classes of mapping algorithms (hash table and suffix/prefix tries. We examined their mapping efficiency (i.e., the percentage of reads that can be mapped to the genomes, usability, running time, and effects of changing default parameter settings using both real and simulated reads. We also investigated how preprocessing data might affect mapping efficiency. Conclusion. Among the five programs compared, in terms of mapping efficiency, Bismark performs the best on the real data, followed by BiSS, BSMAP, and finally BRAT-BW and BS-Seeker with very similar performance. If CPU time is not a constraint, Bismark is a good choice of program for mapping bisulfite treated short reads. Data quality impacts a great deal mapping efficiency. Although increasing the number of mismatches allowed can increase mapping efficiency, it not only significantly slows down the program, but also runs the risk of having increased false positives. Therefore, users should carefully set the related parameters depending on the quality of their sequencing data.

  11. RatMap--rat genome tools and data.

    Science.gov (United States)

    Petersen, Greta; Johnson, Per; Andersson, Lars; Klinga-Levan, Karin; Gómez-Fabre, Pedro M; Ståhl, Fredrik

    2005-01-01

    The rat genome database RatMap (http://ratmap.org or http://ratmap.gen.gu.se) has been one of the main resources for rat genome information since 1994. The database is maintained by CMB-Genetics at Goteborg University in Sweden and provides information on rat genes, polymorphic rat DNA-markers and rat quantitative trait loci (QTLs), all curated at RatMap. The database is under the supervision of the Rat Gene and Nomenclature Committee (RGNC); thus much attention is paid to rat gene nomenclature. RatMap presents information on rat idiograms, karyotypes and provides a unified presentation of the rat genome sequence and integrated rat linkage maps. A set of tools is also available to facilitate the identification and characterization of rat QTLs, as well as the estimation of exon/intron number and sizes in individual rat genes. Furthermore, comparative gene maps of rat in regard to mouse and human are provided.

  12. Design tools and materials in creative work

    DEFF Research Database (Denmark)

    Hansen, Nicolai Brodersen; Dalsgaard, Peter; Halskov, Kim

    2017-01-01

    -oriented perspectives, we wish to examine the potentials and limitations in current uses of design tools and materials, and discuss and explore when and how we can introduce ones. Participation in the workshop requires participants to document and analyse central themes in a case, and the resulting material will serve......This workshop aims to examine and discuss the role and nature of design tools and materials in creative work, and to explore how novel tools can meaningfully combine existing and novel tools to support and augment creative work. By exploring and combining methodological, theoretical, and design...

  13. Evaluation of flood hazard maps in print and web mapping services as information tools in flood risk communication

    Science.gov (United States)

    Hagemeier-Klose, M.; Wagner, K.

    2009-04-01

    Flood risk communication with the general public and the population at risk is getting increasingly important for flood risk management, especially as a precautionary measure. This is also underlined by the EU Flood Directive. The flood related authorities therefore have to develop adjusted information tools which meet the demands of different user groups. This article presents the formative evaluation of flood hazard maps and web mapping services according to the specific requirements and needs of the general public using the dynamic-transactional approach as a theoretical framework. The evaluation was done by a mixture of different methods; an analysis of existing tools, a creative workshop with experts and laymen and an online survey. The currently existing flood hazard maps or web mapping services or web GIS still lack a good balance between simplicity and complexity with adequate readability and usability for the public. Well designed and associative maps (e.g. using blue colours for water depths) which can be compared with past local flood events and which can create empathy in viewers, can help to raise awareness, to heighten the activity and knowledge level or can lead to further information seeking. Concerning web mapping services, a linkage between general flood information like flood extents of different scenarios and corresponding water depths and real time information like gauge levels is an important demand by users. Gauge levels of these scenarios are easier to understand than the scientifically correct return periods or annualities. The recently developed Bavarian web mapping service tries to integrate these requirements.

  14. Study of Tools for Network Discovery and Network Mapping

    Science.gov (United States)

    2003-11-01

    connected to the switch. iv. Accessibility of historical data and event data In general, network discovery tools keep a history of the collected...has the following software dependencies: - Java Virtual machine 76 - Perl modules - RRD Tool - TomCat - PostgreSQL STRENGTHS AND...systems - provide a simple view of the current network status - generate alarms on status change - generate history of status change VISUAL MAP

  15. A software tool for rapid flood inundation mapping

    Science.gov (United States)

    Verdin, James; Verdin, Kristine; Mathis, Melissa L.; Magadzire, Tamuka; Kabuchanga, Eric; Woodbury, Mark; Gadain, Hussein

    2016-06-02

    The GIS Flood Tool (GFT) was developed by the U.S. Geological Survey with support from the U.S. Agency for International Development’s Office of U.S. Foreign Disaster Assistance to provide a means for production of reconnaissance-level flood inundation mapping for data-sparse and resource-limited areas of the world. The GFT has also attracted interest as a tool for rapid assessment flood inundation mapping for the Flood Inundation Mapping Program of the U.S. Geological Survey. The GFT can fill an important gap for communities that lack flood inundation mapping by providing a first-estimate of inundation zones, pending availability of resources to complete an engineering study. The tool can also help identify priority areas for application of scarce flood inundation mapping resources. The technical basis of the GFT is an application of the Manning equation for steady flow in an open channel, operating on specially processed digital elevation data. The GFT is implemented as a software extension in ArcGIS. Output maps from the GFT were validated at 11 sites with inundation maps produced previously by the Flood Inundation Mapping Program using standard one-dimensional hydraulic modeling techniques. In 80 percent of the cases, the GFT inundation patterns matched 75 percent or more of the one-dimensional hydraulic model inundation patterns. Lower rates of pattern agreement were seen at sites with low relief and subtle surface water divides. Although the GFT is simple to use, it should be applied with the oversight or review of a qualified hydraulic engineer who understands the simplifying assumptions of the approach.

  16. Authoring Tool for Identifying Learning Styles, Using Self-Organizing Maps on Mobile Devices

    Directory of Open Access Journals (Sweden)

    Ramón Zatarain Cabada

    2011-05-01

    Full Text Available This work explores a methodological proposal whose main objective is the identification of learning styles using a method of self-organizing maps designed to work, for the most part, on mobile devices. These maps can work in real time and without direct student interaction, which implies the absence of prior information. The results generated are an authoring tool for adaptive courses in Web 2.0 environments.

  17. Harnessing VLSI System Design with EDA Tools

    CERN Document Server

    Kamat, Rajanish K; Gaikwad, Pawan K; Guhilot, Hansraj

    2012-01-01

    This book explores various dimensions of EDA technologies for achieving different goals in VLSI system design. Although the scope of EDA is very broad and comprises diversified hardware and software tools to accomplish different phases of VLSI system design, such as design, layout, simulation, testability, prototyping and implementation, this book focuses only on demystifying the code, a.k.a. firmware development and its implementation with FPGAs. Since there are a variety of languages for system design, this book covers various issues related to VHDL, Verilog and System C synergized with EDA tools, using a variety of case studies such as testability, verification and power consumption. * Covers aspects of VHDL, Verilog and Handel C in one text; * Enables designers to judge the appropriateness of each EDA tool for relevant applications; * Omits discussion of design platforms and focuses on design case studies; * Uses design case studies from diversified application domains such as network on chip, hospital on...

  18. Design of jigs, fixtures and press tools

    CERN Document Server

    Venkataraman, K

    2015-01-01

    Textbook presenting the fundamentals of tool design with special focus on jigs, fixtures and die design Covers sections on sheet metal forming processes; turning, grinding, broaching, welding and modular fixtures; principles of clamping; and an Introduction to Presses and Auxiliary Equipment Author has many years' experience in both academic and industrial environments, and presents this work in an easily-accessible style End of chapter questions and answers assist the learning process for both practicing tooling designers and engineers, and manufacturing en

  19. Content Maps: A Teaching and Assessment Tool for Content Knowledge

    Science.gov (United States)

    Ward, Phillip; Lehwald, Harry; Lee, Yun Soo

    2015-01-01

    Developing content knowledge in teachers presents a constant challenge for teacher educators. This article introduces a teaching and assessment tool called a "content map," which allows teacher educators, teachers, and coaches to conceptualize the scope, sequence, and relational characteristics of the content being taught. Content maps…

  20. Mind Maps as Facilitative Tools in Science Education

    Science.gov (United States)

    Safar, Ammar H.; Jafer,Yaqoub J.; Alqadiri, Mohammad A.

    2014-01-01

    This study explored the perceptions, attitudes, and willingness of pre-service science teachers in the College of Education at Kuwait University about using concept/mind maps and its related application software as facilitative tools, for teaching and learning, in science education. The first level (i.e., reaction) of Kirkpatrick's/Phillips'…

  1. Daylight prediction techniques in energy design tools

    Energy Technology Data Exchange (ETDEWEB)

    Milne, M.; Zurick, J. [California Univ., Los Angeles, Dept. of Architecture, CA (United States)

    1998-09-01

    Four different whole-building energy design tool systems that calculate energy savings from daylighting and that display annual performance on an-hour-by-hour basis, have been tested. The nature of design tools, the sources of hourly outdoor illuminance data, the ways of predicting indoor illumination, the assumptions of each tool, and the resulting energy savings of the design tools tested are discussed. The tests were carried out with the essential criteria for evaluating whole-building daylighting and energy design tools in mind. These have been identified as user confidence, accuracy, response time, and the amount of detail. Results of the tests, all four of them run on a single elementary school classroom for the sake of comparability, were provided. 9 refs., 2 figs.

  2. Modeling, Designing, and Implementing an Avatar-based Interactive Map

    Directory of Open Access Journals (Sweden)

    Stefan Andrei

    2016-03-01

    Full Text Available Designing interactive maps has always been a challenge due to the geographical complexity of the earth’s landscape and the difficulty of resolving details to a high resolution. In the past decade or so, one of the most impressive map-based software application, the Global Positioning System (GPS, has probably the highest level of interaction with the user. This article describes an innovative technique for designing an avatar-based virtual interactive map for the Lamar University Campus, which will entail the buildings’ exterior as well as their interiors. Many universities provide 2D or 3D maps and even interactive maps. However, these maps do not provide a complete interaction with the user. To the best of our knowledge, this project is the first avatar-based interaction game that allows 100% interaction with the user. This work provides tremendous help to the freshman students and visitors of Lamar University. As an important marketing tool, the main objective is to get better visibility of the campus worldwide and to increase the number of students attending Lamar University.

  3. Using intervention mapping to develop a work-related guidance tool for those affected by cancer

    Directory of Open Access Journals (Sweden)

    Munir Fehmidah

    2013-01-01

    Full Text Available Abstract Background Working-aged individuals diagnosed and treated for cancer require support and assistance to make decisions regarding work. However, healthcare professionals do not consider the work-related needs of patients and employers do not understand the full impact cancer can have upon the employee and their work. We therefore developed a work-related guidance tool for those diagnosed with cancer that enables them to take the lead in stimulating discussion with a range of different healthcare professionals, employers, employment agencies and support services. The tool facilitates discussions through a set of questions individuals can utilise to find solutions and minimise the impact cancer diagnosis, prognosis and treatment may have on their employment, sick leave and return to work outcomes. The objective of the present article is to describe the systematic development and content of the tool using Intervention Mapping Protocol (IMP. Methods The study used the first five steps of the intervention mapping process to guide the development of the tool. A needs assessment identified the ‘gaps’ in information/advice received from healthcare professionals and other stakeholders. The intended outcomes and performance objectives for the tool were then identified followed by theory-based methods and an implementation plan. A draft of the tool was developed and subjected to a two-stage Delphi process with various stakeholders. The final tool was piloted with 38 individuals at various stages of the cancer journey. Results The tool was designed to be a self-led tool that can be used by any person with a cancer diagnosis and working for most types of employers. The pilot study indicated that the tool was relevant and much needed. Conclusions Intervention Mapping is a valuable protocol for designing complex guidance tools. The process and design of this particular tool can lend itself to other situations both occupational and more health

  4. Using intervention mapping to develop a work-related guidance tool for those affected by cancer.

    Science.gov (United States)

    Munir, Fehmidah; Kalawsky, Katryna; Wallis, Deborah J; Donaldson-Feilder, Emma

    2013-01-05

    Working-aged individuals diagnosed and treated for cancer require support and assistance to make decisions regarding work. However, healthcare professionals do not consider the work-related needs of patients and employers do not understand the full impact cancer can have upon the employee and their work. We therefore developed a work-related guidance tool for those diagnosed with cancer that enables them to take the lead in stimulating discussion with a range of different healthcare professionals, employers, employment agencies and support services. The tool facilitates discussions through a set of questions individuals can utilise to find solutions and minimise the impact cancer diagnosis, prognosis and treatment may have on their employment, sick leave and return to work outcomes. The objective of the present article is to describe the systematic development and content of the tool using Intervention Mapping Protocol (IMP). The study used the first five steps of the intervention mapping process to guide the development of the tool. A needs assessment identified the 'gaps' in information/advice received from healthcare professionals and other stakeholders. The intended outcomes and performance objectives for the tool were then identified followed by theory-based methods and an implementation plan. A draft of the tool was developed and subjected to a two-stage Delphi process with various stakeholders. The final tool was piloted with 38 individuals at various stages of the cancer journey. The tool was designed to be a self-led tool that can be used by any person with a cancer diagnosis and working for most types of employers. The pilot study indicated that the tool was relevant and much needed. Intervention Mapping is a valuable protocol for designing complex guidance tools. The process and design of this particular tool can lend itself to other situations both occupational and more health-care based.

  5. Tools and techniques for product design

    NARCIS (Netherlands)

    Lutters, Diederick; Houten, Fred J.A.M.; Bernard, Alain; Mermoz, Emmanuel; Schutte, Corné S.L.

    2014-01-01

    For product designers, tools and techniques are essential in driving the design cycle. Nevertheless, their employment usually is implicit, while passing over e.g. the design and project environments empowering their adequate use. This publication presents an overview of approaches in structuring and

  6. Study maps as a tool for the adaptive tests construction

    Directory of Open Access Journals (Sweden)

    Dita Dlabolová

    2013-01-01

    Full Text Available Measurement of students’ knowledge is an essential part of the educational process. Teachers on universities often use computer-based tests to testing a large number of students in a short time. The question is, what kind of information these tests provide, and if it is possible to classify students on this basis. Praxis shows that the scalar test results in the form of simple numbers cannot be plainly interpreted as the level of knowledge; moreover it is not easy to build such tests, which detect the necessary information. In the first part of the article we present the results of pedagogical experiment focused on the difference between information obtained through the computer-based test and a teacher’s interview with the same students. Possible starting point to improve information from computer-based tests in non-scalar form is a construction of an adaptive test, adapting test items to identify knowledge similar to a conversation with a teacher. As a tool for the design of the adaptive tests we use so called study maps, which are described in the second part of the article.

  7. CONCEPT MAPS – IMPROVEMENT TOOL FOR ACCOUNTING INFORMATION

    Directory of Open Access Journals (Sweden)

    Oana DRĂGAN

    2014-12-01

    Full Text Available Concept maps, viewed as an innovative method for learning and evolution, are used to synthesize the knowledge of the participants to the learning process and are based on the main concepts and the relationship between them. They offer a visual representation of the information held by an individual, caught through his ability to synthesize the notions/the key concepts. The current study intends to show the importance and efficiency of using the concept maps in economics, especially in the accounting department, a method designed to settle the learning process and, also, to offer a sustainable value. The current empirical study is based on the manner in which the accounting knowledge is displayed by a sample group of 19 practitioners. The originality, the relevance of the concept maps method is underlined by the idea of the practitioners creating their own concept maps designed to point out the importance of the cognitive structure when describing the relationships between different accounting principles.

  8. Indoor Air Quality Design Tools for Schools

    Science.gov (United States)

    The information available here is presented as a tool to help school districts and facility planners design the next generation of learning environments so that the school facility will help, rather than hinder, schools in achieving their core mission

  9. ASTROS: A multidisciplinary automated structural design tool

    Science.gov (United States)

    Neill, D. J.

    1989-01-01

    ASTROS (Automated Structural Optimization System) is a finite-element-based multidisciplinary structural optimization procedure developed under Air Force sponsorship to perform automated preliminary structural design. The design task is the determination of the structural sizes that provide an optimal structure while satisfying numerous constraints from many disciplines. In addition to its automated design features, ASTROS provides a general transient and frequency response capability, as well as a special feature to perform a transient analysis of a vehicle subjected to a nuclear blast. The motivation for the development of a single multidisciplinary design tool is that such a tool can provide improved structural designs in less time than is currently needed. The role of such a tool is even more apparent as modern materials come into widespread use. Balancing conflicting requirements for the structure's strength and stiffness while exploiting the benefits of material anisotropy is perhaps an impossible task without assistance from an automated design tool. Finally, the use of a single tool can bring the design task into better focus among design team members, thereby improving their insight into the overall task.

  10. Web mapping: tools and solutions for creating interactive maps of forestry interest

    Directory of Open Access Journals (Sweden)

    Notarangelo G

    2011-12-01

    Full Text Available The spread of geobrowsers as tools for displaying geographically referenced information provides insights and opportunities to those who, not being specialists in Geographic Information Systems, want to take advantage from exploration and communication power offered by these software. Through the use of web services such as Google Maps and the use of suitable markup languages, one can create interactive maps starting from highly heterogeneous data and information. These interactive maps can also be easily distributed and shared with Internet users, because they do not need to use proprietary software nor special skills but only a web browser. Unlike the maps created with GIS, whose output usually is a static image, the interactive maps retain all their features to users advantage. This paper describes a web application that, using the Keyhole Markup Language and the free service of Google Maps, produces choropleth maps relating to some forest indicators estimated by the last Italian National Forest Inventory. The creation of a map is done through a simple and intuitive interface. The maps created by users can be downloaded as KML file and can be viewed or modified via the freeware application Google Earth or free and open source GIS software like Quantum GIS. The web application is free and available at www.ricercaforestale.it.

  11. Poster: A modern Python interface for the Generic Mapping Tools

    OpenAIRE

    Uieda, Leonardo; Wessel, Paul

    2017-01-01

    Poster presentation at the AGU Fall Meeting 2017.Abstract: IN51B-0018Inkscape source files for the poster and a Jupyter notebook with the demo are on the Github repository: github.com/leouieda/agu2017 The demo notebook can be run online using the MyBinder service: agu2017demo.gmtpython.xyzAbstractFigures generated by The Generic Mapping Tools (GMT) are present in countless publications across the Earth sciences. The command-line interface of GMT lends the tool its flexibility bu...

  12. Graphic User Interface Design for Mapping, Information, Display, and Analysis Systems

    National Research Council Canada - National Science Library

    Lowell, James

    2000-01-01

    This thesis evaluates both the interface design process and the map-based mission planning tools of the Loosely Coupled Components Research Group, Naval Postgraduate School, for human factors usability...

  13. Geomorphic Unit Tool (GUT): Applications of Fluvial Mapping

    Science.gov (United States)

    Kramer, N.; Bangen, S. G.; Wheaton, J. M.; Bouwes, N.; Wall, E.; Saunders, C.; Bennett, S.; Fortney, S.

    2017-12-01

    Geomorphic units are the building blocks of rivers and represent distinct habitat patches for many fluvial organisms. We present the Geomorphic Unit Toolkit (GUT), a flexible GIS geomorphic unit mapping tool, to generate maps of fluvial landforms from topography. GUT applies attributes to landforms based on flow stage (Tier 1), topographic signatures (Tier 2), geomorphic characteristics (Tier 3) and patch characteristics (Tier 4) to derive attributed maps at the level of detail required by analysts. We hypothesize that if more rigorous and consistent geomorphic mapping is conducted, better correlations between physical habitat units and ecohydraulic model results will be obtained compared to past work. Using output from GUT for coarse bed tributary streams in the Columbia River Basin, we explore relationships between salmonid habitat and geomorphic spatial metrics. We also highlight case studies of how GUT can be used to showcase geomorphic impact from large wood restoration efforts. Provided high resolution topography exists, this tool can be used to quickly assess changes in fluvial geomorphology in watersheds impacted by human activities.

  14. Conceptual Design Tool for Concrete Shell Structures

    DEFF Research Database (Denmark)

    Holst, Malene Kirstine; Kirkegaard, Poul Henning

    2011-01-01

    This paper focuses on conceptual tools for concrete shell structures when working within the span of performance-based design and computational morphogenesis. The designer, referred to as the Architect-Engineer, works through several iterations parallel with aesthetic, functional and technical re...

  15. Designing Online Assessment Tools for Disengaged Youth

    Science.gov (United States)

    Brader, Andy; Luke, Allan; Klenowski, Val; Connolly, Stephen; Behzadpour, Adib

    2014-01-01

    This article reports on the development of online assessment tools for disengaged youth in flexible learning environments. Sociocultural theories of learning and assessment and Bourdieu's sociological concepts of capital and exchange were used to design a purpose-built content management system. This design experiment engaged participants in…

  16. Simulation tools for detector and instrument design

    DEFF Research Database (Denmark)

    Kanaki, Kalliopi; Kittelmann, Thomas; Cai, Xiao Xiao

    2018-01-01

    The high performance requirements at the European Spallation Source have been driving the technological advances on the neutron detector front. Now more than ever is it important to optimize the design of detectors and instruments, to fully exploit the ESS source brilliance. Most of the simulation...... a powerful set of tools to tailor the detector and instrument design to the instrument application....

  17. Integrated Design Tools for Embedded Control Systems

    NARCIS (Netherlands)

    Jovanovic, D.S.; Hilderink, G.H.; Broenink, Johannes F.; Karelse, F.

    2001-01-01

    Currently, computer-based control systems are still being implemented using the same techniques as 10 years ago. The purpose of this project is the development of a design framework, consisting of tools and libraries, which allows the designer to build high reliable heterogeneous real-time embedded

  18. Software tools for the particle accelerator designs

    International Nuclear Information System (INIS)

    Sugimoto, Masayoshi

    1988-01-01

    The software tools used for the designs of the particle accelerators are going to be implemented on the small computer systems, such as the personal computers or the work stations. These are called from the interactive environment like a window application program. The environment contains the small expert system to make easy to select the design parameters. (author)

  19. Radioactive contamination mapping system detailed design report

    International Nuclear Information System (INIS)

    Bauer, R.G.; O'Callaghan, P.B.

    1996-08-01

    The Hanford Site's 100 Area production reactors released radioactively and chemically contaminated liquids into the soil column. The primary source of the contaminated liquids was reactor coolant and various waste waters released from planned liquid discharges, as well as pipelines, pipe junctions, and retention basins leaking into the disposal sites. Site remediation involves excavating the contaminated soils using conventional earthmoving techniques and equipment, treating as appropriate, transporting the soils, and disposing the soils at ERDF. To support remediation excavation, disposal, and documentation requirements, an automated radiological monitoring system was deemed necessary. The RCMS (Radioactive Contamination Mapping System) was designed to fulfill this need. This Detailed Design Report provides design information for the RCMS in accordance with Bechtel Hanford, Inc. Engineering Design Project Instructions

  20. Analytical Tools for Space Suit Design

    Science.gov (United States)

    Aitchison, Lindsay

    2011-01-01

    As indicated by the implementation of multiple small project teams within the agency, NASA is adopting a lean approach to hardware development that emphasizes quick product realization and rapid response to shifting program and agency goals. Over the past two decades, space suit design has been evolutionary in approach with emphasis on building prototypes then testing with the largest practical range of subjects possible. The results of these efforts show continuous improvement but make scaled design and performance predictions almost impossible with limited budgets and little time. Thus, in an effort to start changing the way NASA approaches space suit design and analysis, the Advanced Space Suit group has initiated the development of an integrated design and analysis tool. It is a multi-year-if not decadal-development effort that, when fully implemented, is envisioned to generate analysis of any given space suit architecture or, conversely, predictions of ideal space suit architectures given specific mission parameters. The master tool will exchange information to and from a set of five sub-tool groups in order to generate the desired output. The basic functions of each sub-tool group, the initial relationships between the sub-tools, and a comparison to state of the art software and tools are discussed.

  1. New tools for evaluating LQAS survey designs

    OpenAIRE

    Hund, Lauren

    2014-01-01

    Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are pr...

  2. Evaluation of flood hazard maps in print and web mapping services as information tools in flood risk communication

    Directory of Open Access Journals (Sweden)

    M. Hagemeier-Klose

    2009-04-01

    Full Text Available Flood risk communication with the general public and the population at risk is getting increasingly important for flood risk management, especially as a precautionary measure. This is also underlined by the EU Flood Directive. The flood related authorities therefore have to develop adjusted information tools which meet the demands of different user groups. This article presents the formative evaluation of flood hazard maps and web mapping services according to the specific requirements and needs of the general public using the dynamic-transactional approach as a theoretical framework. The evaluation was done by a mixture of different methods; an analysis of existing tools, a creative workshop with experts and laymen and an online survey.

    The currently existing flood hazard maps or web mapping services or web GIS still lack a good balance between simplicity and complexity with adequate readability and usability for the public. Well designed and associative maps (e.g. using blue colours for water depths which can be compared with past local flood events and which can create empathy in viewers, can help to raise awareness, to heighten the activity and knowledge level or can lead to further information seeking. Concerning web mapping services, a linkage between general flood information like flood extents of different scenarios and corresponding water depths and real time information like gauge levels is an important demand by users. Gauge levels of these scenarios are easier to understand than the scientifically correct return periods or annualities. The recently developed Bavarian web mapping service tries to integrate these requirements.

  3. Expressive Design Tools: Procedural Content Generation for Game Designers

    OpenAIRE

    Smith, Gillian Margaret

    2012-01-01

    Games are shaped by the tools we use to make them and our ability to model the concepts they address. Vast improvements in computer graphics technology, processing power, storage capacity, and physics simulations have driven game design for the past forty years, leading to beautiful, spacious, detailed, and highly immersive worlds supporting games that are, for the most part, fundamentally about movement, collision, and other physics-based concepts. Designers use increasingly complex tools th...

  4. Parametric tools over crowdsourced maps as means for participatory consideration of environmental issues in cities

    Science.gov (United States)

    Montoya, Paula; Ballesteros, José; Gervás, Pablo

    2015-04-01

    The increasing complexity of space use and resource cycles in cities, demands an understanding of the built environment as "ecological": enabling mutation while remaining balanced and biologically sustainable. Designing man`s environment is no longer a question of defining types, but rather an act of inserting changes within a complex system. Architecture and urban planning have become increasingly aware of their condition as system-oriented disciplines, and they are in the process of developing the necessary languages, design tools, and alliances. We will argue the relevance of parametric maps as one of the most powerful of those tools, in terms of their potential for adaptive prototype design, convergence of disciplines, and collaborative work. Cities need to change in order to survive. As the main human landscape (by 2050 75% of the world's population will live in urban areas) cities follow biological patterns of behaviour, constantly replacing their cells, renovating infrastructure systems and refining methods for energy provision and waste management. They need to adapt constantly. As responsive entities, they develop their own protocols for reaction to environmental change and challenge the increasing pressure of several issues related to scale: population, mobility, water and energy supply, pollution... The representation of these urban issues on maps becomes crucial for understanding and addressing them in design. Maps enhanced with parametric tools are relational and not only they register environmental dynamics but they allow adaptation of the system through interwoven parameters of mutation. Citizens are taking part in decisions and becoming aware of their role as urban experts in a bottom-up design process of the cities where they live. Modern tools for dynamic visualisation and collaborative edition of maps have an important role to play in this process. More and more people consult maps on hand-held devices as part of their daily routine. The advent

  5. Design for Motivation: Evaluation of a Design Tool

    Directory of Open Access Journals (Sweden)

    Dimitra Chasanidou

    2018-02-01

    Full Text Available Design for motivation constitutes a design practice that focuses on the activation of human motives to perform an action. There is an increasing need to design motivational and engaging mechanisms for voluntary systems, such as innovation platforms, where user participation is a key target. When designing for motivation, a challenge of the early design phases is the selection of appropriate design tool and strategy. The current work presents a design tool, namely DEMO (DEsign for MOtivation, and evaluates its design process. The tool provides multidisciplinary teams with a user-centred, structured method to ideate and ultimately develop a consistent design plan to engage the users of innovation platforms. The evaluation study analysed the tool’s contribution to the design of motivational innovation platforms, utilising three data collection methods: a protocol analysis, interviews and questionnaires. The results discuss the experiences of 32 users with the development of motivation concepts, the group and the user activities, as well as their creativity aspects. Structured processes and the use of artefacts were found to be productive practices in the early design phases. The results also highlight the importance of multidisciplinary and user-centred teams that can enhance collaboration and communication during the design processes.

  6. JVM: Java Visual Mapping tool for next generation sequencing read.

    Science.gov (United States)

    Yang, Ye; Liu, Juan

    2015-01-01

    We developed a program JVM (Java Visual Mapping) for mapping next generation sequencing read to reference sequence. The program is implemented in Java and is designed to deal with millions of short read generated by sequence alignment using the Illumina sequencing technology. It employs seed index strategy and octal encoding operations for sequence alignments. JVM is useful for DNA-Seq, RNA-Seq when dealing with single-end resequencing. JVM is a desktop application, which supports reads capacity from 1 MB to 10 GB.

  7. Graphical Acoustic Liner Design and Analysis Tool

    Science.gov (United States)

    Howerton, Brian M. (Inventor); Jones, Michael G. (Inventor)

    2016-01-01

    An interactive liner design and impedance modeling tool comprises software utilized to design acoustic liners for use in constrained spaces, both regularly and irregularly shaped. A graphical user interface allows the acoustic channel geometry to be drawn in a liner volume while the surface impedance calculations are updated and displayed in real-time. A one-dimensional transmission line model may be used as the basis for the impedance calculations.

  8. Integrated Design Tools for Embedded Control Systems

    OpenAIRE

    Jovanovic, D.S.; Hilderink, G.H.; Broenink, Johannes F.; Karelse, F.

    2001-01-01

    Currently, computer-based control systems are still being implemented using the same techniques as 10 years ago. The purpose of this project is the development of a design framework, consisting of tools and libraries, which allows the designer to build high reliable heterogeneous real-time embedded systems in a very short time at a fraction of the present day costs. The ultimate focus of current research is on transformation control laws to efficient concurrent algorithms, with concerns about...

  9. Design of Intelligent Transportation Inquiry System Based on MapX in the Environment of VC++

    Directory of Open Access Journals (Sweden)

    Cheng Juan

    2016-01-01

    Full Text Available This paper applied MapInfo, the professional soft ware tool of GIS, integrated secondary exploiture combining with elctronic maps, and made use of the exploiture flat roof Visual C++ as the tool of visualize development, transferred MapX, a control of MapInfo, integrated them. The paper designed the Inquiry System in Intelligent Transportation, which including query system of road information, query system of bus information, query system of district information. It can be carried out space analysis and query function based on GIS. Adopted SQL Server manage attribute data, by data binding, attribute data in SQL Server and victor picture data were combined.

  10. Proverbs : Probabilistic design tools for vertical breakwaters

    NARCIS (Netherlands)

    Oumeraci, H.; Allsop, N.W.H.; De Groot, M.B.; Crouch, R.S.; Vrijling, J.K.

    1999-01-01

    Final report and appendices of the European project Proverbs on tools for the design of vertical breakwaters (caisson type breakwaters) and similar hydraulic structures in the coastal zone. It includes the loads (waves) as well as the strength of the structure (geotechnial aspects, structural

  11. Design Tools and Workflows for Braided Structures

    DEFF Research Database (Denmark)

    Vestartas, Petras; Heinrich, Mary Katherine; Zwierzycki, Mateusz

    2017-01-01

    the objectives and motivation for our exploration of braid within an architectural context and highlighting both the relevance of braid and current lack of suitable design modelling tools to support our approach. We briefly introduce the state-of-the-art in braid representation and present the characteristics...

  12. New tools for evaluating LQAS survey designs.

    Science.gov (United States)

    Hund, Lauren

    2014-02-15

    Lot Quality Assurance Sampling (LQAS) surveys have become increasingly popular in global health care applications. Incorporating Bayesian ideas into LQAS survey design, such as using reasonable prior beliefs about the distribution of an indicator, can improve the selection of design parameters and decision rules. In this paper, a joint frequentist and Bayesian framework is proposed for evaluating LQAS classification accuracy and informing survey design parameters. Simple software tools are provided for calculating the positive and negative predictive value of a design with respect to an underlying coverage distribution and the selected design parameters. These tools are illustrated using a data example from two consecutive LQAS surveys measuring Oral Rehydration Solution (ORS) preparation. Using the survey tools, the dependence of classification accuracy on benchmark selection and the width of the 'grey region' are clarified in the context of ORS preparation across seven supervision areas. Following the completion of an LQAS survey, estimation of the distribution of coverage across areas facilitates quantifying classification accuracy and can help guide intervention decisions.

  13. Map-based mobile services design, interaction and usability

    CERN Document Server

    Meng, Liqiu; Winter, Stephan; Popovich, Vasily

    2008-01-01

    This book reports the newest research and technical achievements on the following theme blocks: Design of mobile map services and its constraints; Typology and usability of mobile map services; Visualization solutions on small displays for time-critical tasks; Mobile map users; Interaction and adaptation in mobile environments; and Applications of map-based mobile services.

  14. Development of a competency mapping tool for undergraduate professional degree programmes, using mechanical engineering as a case study

    Science.gov (United States)

    Holmes, David W.; Sheehan, Madoc; Birks, Melanie; Smithson, John

    2018-01-01

    Mapping the curriculum of a professional degree to the associated competency standard ensures graduates have the competence to perform as professionals. Existing approaches to competence mapping vary greatly in depth, complexity, and effectiveness, and a standardised approach remains elusive. This paper describes a new mapping software tool that streamlines and standardises the competency mapping process. The available analytics facilitate ongoing programme review, management, and accreditation. The complete mapping and analysis of an Australian mechanical engineering degree programme is described as a case study. Each subject is mapped by evaluating the amount and depth of competence development present. Combining subject results then enables highly detailed programme level analysis. The mapping process is designed to be administratively light, with aspects of professional development embedded in the software. The effective competence mapping described in this paper enables quantification of learning within a professional degree programme, and provides a mechanism for holistic programme improvement.

  15. Reactor FaceMap Tool: A modern graphics tool for displaying reactor data

    International Nuclear Information System (INIS)

    Roberts, J.C.

    1991-01-01

    A prominent graphical user interface in reactor physics applications at the Savannah River Site is the reactor facemap display. This is a two dimensional view of a cross section of a reactor. In the past each application which needed a facemap implemented its own version. Thus, none of the code was reused, the facemap implementation was hardware dependent and the user interface was different for each facemap. The Reactor FaceMap Tool was built to solve these problems. Through the use of modern computing technologies such as X Windows, object-oriented programming and client/server technology the Reactor FaceMap Tool has the flexibility to work in many diverse applications and the portability to run on numerous types of hardware

  16. FeatureMap3D - a tool to map protein features and sequence conservation onto homologous structures in the PDB

    DEFF Research Database (Denmark)

    Wernersson, Rasmus; Rapacki, Krzysztof; Stærfeldt, Hans Henrik

    2006-01-01

    FeatureMap3D is a web-based tool that maps protein features onto 3D structures. The user provides sequences annotated with any feature of interest, such as post-translational modifications, protease cleavage sites or exonic structure and FeatureMap3D will then search the Protein Data Bank (PDB) f...

  17. Matlab as a robust control design tool

    Science.gov (United States)

    Gregory, Irene M.

    1994-01-01

    This presentation introduces Matlab as a tool used in flight control research. The example used to illustrate some of the capabilities of this software is a robust controller designed for a single stage to orbit air breathing vehicles's ascent to orbit. The global requirements of the controller are to stabilize the vehicle and follow a trajectory in the presence of atmospheric disturbances and strong dynamic coupling between airframe and propulsion.

  18. AGILE, a tool for interactive lattice design

    CERN Document Server

    Bryant, P J

    2000-01-01

    AGILE is a program that works in the IBM-PC, MS-Windows environment and is dedicated to the interactive design of alternating-gradient lattices for synchrotrons and transfer lines. The program was originally intended as a teaching tool, but has been used mostly for professional design work and is subject to continuous development. It contains original algorithms for coupling, scattering and eddy currents, and some slightly unusual algorithms for off-axis orbits and space charge. There are also additional features such as engineering design aids, calculators for relativistic and synchrotron radiation parameters, expert routines for optimising slow extraction, fitting and matching, and the internal storage of constants for over 1000 stable and quasi-stable charged particles. The program is object-oriented and fully integrated into the Windows environment - it is not a shell. Apart from office work, AGILE is ideal for home use, design workshops and when travelling. It is particularly suited to practical problems...

  19. Expressive map design: OGC SLD/SE++ extension for expressive map styles

    Science.gov (United States)

    Christophe, Sidonie; Duménieu, Bertrand; Masse, Antoine; Hoarau, Charlotte; Ory, Jérémie; Brédif, Mathieu; Lecordix, François; Mellado, Nicolas; Turbet, Jérémie; Loi, Hugo; Hurtut, Thomas; Vanderhaeghe, David; Vergne, Romain; Thollot, Joëlle

    2018-05-01

    In the context of custom map design, handling more artistic and expressive tools has been identified as a carto-graphic need, in order to design stylized and expressive maps. Based on previous works on style formalization, an approach for specifying the map style has been proposed and experimented for particular use cases. A first step deals with the analysis of inspiration sources, in order to extract `what does make the style of the source', i.e. the salient visual characteristics to be automatically reproduced (textures, spatial arrangements, linear stylization, etc.). In a second step, in order to mimic and generate those visual characteristics, existing and innovative rendering techniques have been implemented in our GIS engine, thus extending the capabilities to generate expressive renderings. Therefore, an extension of the existing cartographic pipeline has been proposed based on the following aspects: 1- extension of the symbolization specifications OGC SLD/SE in order to provide a formalism to specify and reference expressive rendering methods; 2- separate the specification of each rendering method and its parameterization, as metadata. The main contribution has been described in (Christophe et al. 2016). In this paper, we focus firstly on the extension of the cartographic pipeline (SLD++ and metadata) and secondly on map design capabilities which have been experimented on various topographic styles: old cartographic styles (Cassini), artistic styles (watercolor, impressionism, Japanese print), hybrid topographic styles (ortho-imagery & vector data) and finally abstract and photo-realist styles for the geovisualization of costal area. The genericity and interoperability of our approach are promising and have already been tested for 3D visualization.

  20. Star-Mapping Tools Enable Tracking of Endangered Animals

    Science.gov (United States)

    2009-01-01

    Software programmer Jason Holmberg of Portland, Oregon, partnered with a Goddard Space Flight Center astrophysicist to develop a method for tracking the elusive whale shark using the unique spot patterns on the fish s skin. Employing a star-mapping algorithm originally designed for the Hubble Space Telescope, Holmberg created the Shepherd Project, a photograph database and pattern-matching system that can identify whale sharks by their spots and match images contributed to the database by photographers from around the world. The system has been adapted for tracking other rare and endangered animals, including polar bears and ocean sunfish.

  1. U.S. Geological Survey ArcMap Sediment Classification tool

    Science.gov (United States)

    O'Malley, John

    2007-01-01

    The U.S. Geological Survey (USGS) ArcMap Sediment Classification tool is a custom toolbar that extends the Environmental Systems Research Institute, Inc. (ESRI) ArcGIS 9.2 Desktop application to aid in the analysis of seabed sediment classification. The tool uses as input either a point data layer with field attributes containing percentage of gravel, sand, silt, and clay or four raster data layers representing a percentage of sediment (0-100%) for the various sediment grain size analysis: sand, gravel, silt and clay. This tool is designed to analyze the percent of sediment at a given location and classify the sediments according to either the Folk (1954, 1974) or Shepard (1954) as modified by Schlee(1973) classification schemes. The sediment analysis tool is based upon the USGS SEDCLASS program (Poppe, et al. 2004).

  2. Cognitive mapping tools: review and risk management needs.

    Science.gov (United States)

    Wood, Matthew D; Bostrom, Ann; Bridges, Todd; Linkov, Igor

    2012-08-01

    Risk managers are increasingly interested in incorporating stakeholder beliefs and other human factors into the planning process. Effective risk assessment and management requires understanding perceptions and beliefs of involved stakeholders, and how these beliefs give rise to actions that influence risk management decisions. Formal analyses of risk manager and stakeholder cognitions represent an important first step. Techniques for diagramming stakeholder mental models provide one tool for risk managers to better understand stakeholder beliefs and perceptions concerning risk, and to leverage this new understanding in developing risk management strategies. This article reviews three methodologies for assessing and diagramming stakeholder mental models--decision-analysis-based mental modeling, concept mapping, and semantic web analysis--and assesses them with regard to their ability to address risk manager needs. © 2012 Society for Risk Analysis.

  3. Mapping data through concept maps: an auxiliary tool for decision making regarding institutional projects

    International Nuclear Information System (INIS)

    D’Avila, Adriana L.

    2017-01-01

    This paper reports a data mapping construction aimed to subsidize the decision making process regarding institutional projects, at different levels of responsibility, at the Instituto de Engenharia Nuclear. The conception models a systemic and adaptive tool which is based on the concept mapping theory developed by Novak. The Instituto de Engenharia Nuclear (IEN) is a research center of the Comissão de Energia Nuclear (CNEN), an autarchy attached to Ministério da Ciência, Tecnologia, Inovações e Comunicações. The main focus of IEN is research and development of nuclear science and technology. The developed tool creates a more effective and accessible way of sharing information. However, beyond project data integration into a specific instrument, it also has the intent to compensate the consequences of the continued reduction of the number of workers at IEN over recent years. The recent CNEN management report, published in 2016, showed the problematic situation caused by the loss of workers, stressing the high number of pensions granted and to be granted in the near future. The loss of labor force, besides exposing the urgent need for optimizing knowledge management efforts, also sheds light into another problem: the need for grouping responsibilities among the remaining workers. In this respect, the tool developed helps to face this challenge, enhancing autonomy at different levels but preserving the institutional guidelines. To conclude the report, and in order to exemplify the method, the paper also describes the map construction relative an innovative project proposal in a joint development towards the nuclear area. (author)

  4. Mapping data through concept maps: an auxiliary tool for decision making regarding institutional projects

    Energy Technology Data Exchange (ETDEWEB)

    D’Avila, Adriana L., E-mail: adriana@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Divisão de Engenharia Nuclear

    2017-11-01

    This paper reports a data mapping construction aimed to subsidize the decision making process regarding institutional projects, at different levels of responsibility, at the Instituto de Engenharia Nuclear. The conception models a systemic and adaptive tool which is based on the concept mapping theory developed by Novak. The Instituto de Engenharia Nuclear (IEN) is a research center of the Comissão de Energia Nuclear (CNEN), an autarchy attached to Ministério da Ciência, Tecnologia, Inovações e Comunicações. The main focus of IEN is research and development of nuclear science and technology. The developed tool creates a more effective and accessible way of sharing information. However, beyond project data integration into a specific instrument, it also has the intent to compensate the consequences of the continued reduction of the number of workers at IEN over recent years. The recent CNEN management report, published in 2016, showed the problematic situation caused by the loss of workers, stressing the high number of pensions granted and to be granted in the near future. The loss of labor force, besides exposing the urgent need for optimizing knowledge management efforts, also sheds light into another problem: the need for grouping responsibilities among the remaining workers. In this respect, the tool developed helps to face this challenge, enhancing autonomy at different levels but preserving the institutional guidelines. To conclude the report, and in order to exemplify the method, the paper also describes the map construction relative an innovative project proposal in a joint development towards the nuclear area. (author)

  5. Design Package for Fuel Retrieval System Fuel Handling Tool Modification

    International Nuclear Information System (INIS)

    TEDESCHI, D.J.

    2000-01-01

    This design package documents design, fabrication, and testing of new stinger tool design. Future revisions will document further development of the stinger tool and incorporate various developmental stages, and final test results

  6. The Synthesis Map Is a Multidimensional Educational Tool That Provides Insight into Students' Mental Models and Promotes Students' Synthetic Knowledge Generation

    Science.gov (United States)

    Ortega, Ryan A.; Brame, Cynthia J.

    2015-01-01

    Concept mapping was developed as a method of displaying and organizing hierarchical knowledge structures. Using the new, multidimensional presentation software Prezi, we have developed a new teaching technique designed to engage higher-level skills in the cognitive domain. This tool, synthesis mapping, is a natural evolution of concept mapping,…

  7. Impact assessment as a design tool

    DEFF Research Database (Denmark)

    Lyhne, Ivar

    Research and development (R&D) programmes constitute a pivotal arena for shaping technologies of the future. In order to make qualified decisions, R&D programmes ought to be subject to impact assessment (IA). It seems, however, that only a few countries have developed a systematic practice. One r...... reason for the limited practice might be that IA of R&D policy is said to be particularly difficult. This paper reports on experiences from a voluntary IA application in Danish with point of departure in the question: How does IA work as a design tool in terms of R&D programmes?...

  8. Electronic circuit design with HEP computational tools

    International Nuclear Information System (INIS)

    Vaz, Mario

    1996-01-01

    CPSPICE is an electronic circuit statistical simulation program developed to run in a parallel environment under UNIX operating system and TCP/IP communications protocol, using CPS - Cooperative Processes Software , SPICE program and CERNLIB software package. It is part of a set of tools being develop, intended to help electronic engineers to design, model and simulate complex systems and circuits for High Energy Physics detectors, based on statistical methods, using the same software and methodology used by HEP physicists for data analysis. CPSPICE simulates electronic circuits by Monte Carlo method, through several different processes running simultaneously SPICE in UNIX parallel computers or workstation farms. Data transfer between CPS processes for a modified version of SPICE2G6 is done by RAM memory, but can also be done through hard disk files if no source files are available for the simulator, and for bigger simulation outputs files. Simulation results are written in a HBOOK file as a NTUPLE, to be examined by HBOOK in batch model or graphics, and analyzed by statistical procedures available. The HBOOK file be stored on hard disk for small amount of data, or into Exabyte tape file for large amount of data. HEP tools also helps circuit or component modeling, like MINUT program from CERNLIB, that implements Nelder and Mead Simplex and Gradient with or without derivatives algorithms, and can be used for design optimization.This paper presents CPSPICE program implementation. The scheme adopted is suitable to make parallel other electronic circuit simulators. (author)

  9. Friction Mapping as a Tool for Measuring the Elastohydrodynamic Contact Running-in Process

    Science.gov (United States)

    2015-10-01

    ARL-TR-7501 ● OCT 2015 US Army Research Laboratory Friction Mapping as a Tool for Measuring the Elastohydrodynamic Contact...Research Laboratory Friction Mapping as a Tool for Measuring the Elastohydrodynamic Contact Running-in Process by Stephen Berkebile Vehicle...YYYY) October 2015 2. REPORT TYPE Final 3. DATES COVERED (From - To) 1 January–30 June 2015 4. TITLE AND SUBTITLE Friction Mapping as a Tool for

  10. MAP-IT: A Practical Tool for Planning Complex Behavior Modification Interventions.

    Science.gov (United States)

    Hansen, Sylvia; Kanning, Martina; Lauer, Romy; Steinacker, Jürgen M; Schlicht, Wolfgang

    2017-09-01

    Health research often aims to prevent noncommunicable diseases and to improve individual and public health by discovering intervention strategies that are effective in changing behavior and/or environments that are detrimental to one's health. Ideally, findings from original research support practitioners in planning and implementing effective interventions. Unfortunately, interventions often fail to overcome the translational block between science and practice. They often ignore theoretical knowledge, overlook empirical evidence, and underrate the impact of the environment. Accordingly, sustainable changes in individual behavior and/or the environment are difficult to achieve. Developing theory-driven and evidence-based interventions in the real world is a complex task. Existing implementation frameworks and theories often do not meet the needs of health practitioners. The purpose of this article is to synthesize existing frameworks and to provide a tool, the Matrix Assisting Practitioner's Intervention Planning Tool (MAP-IT), that links research to practice and helps practitioners to design multicomponent interventions. In this article, we use physical activity of older adults as an example to explain the rationale of MAP-IT. In MAP-IT, individual as well as environmental mechanisms are listed and behavior change techniques are linked to these mechanisms and to intervention components. MAP-IT is theory-driven and evidence-based. It is time-saving and helpful for practitioners when planning complex interventions.

  11. A BPMN-based process map for the design and construction of façades

    Directory of Open Access Journals (Sweden)

    Eleanor Voss

    2013-12-01

    Full Text Available Corresponding author: Eleanor Voss, Glass and Façade Technology Research Group, Department of Engineering, University of Cambridge, Trumpington Street, Cambridge, UK. E-mail: ev236@cam.ac.uk Process mapping can lead to significant efficiency and quality improvements in construction engineering and is an ideal basis for developing IT support tools. The increasing complexity and multidisciplinary nature of façade design and construction suggest that a process map would be beneficial in this sector of the construction industry, but it has received limited attention to date. This paper presents a verified process map of the façade design and construction process. The map is the first of its kind to represent, in detail, the whole process relevant to all façade types, from commencement of the façade consultant's and contactor's participation, to the end of their involvement. The paper describes the process by which the mapping notation was selected, followed by the development and verification of the process map, including testing in two independent research projects. The BuildingSMART's BPMN notation is found to have superior system features and comprehensibility for this application and the resulting process map is easy to interpret and verify by industry experts. The trialling of the map in the two research projects indicate that the map is a useful tool for assessing process improvements in the façades sector.

  12. A BPMN-Based Process Map for the Design and Construction of Façades

    Directory of Open Access Journals (Sweden)

    Eleanor Voss

    2013-12-01

    Full Text Available Process mapping can lead to significant efficiency and quality improvements in construction engineering and is an ideal basis for developing IT support tools. The increasing complexity and multidisciplinary nature of façade design and construction suggest that a process map would be beneficial in this sector of the construction industry, but it has received limited attention to date. This paper presents a verified process map of the façade design and construction process.  The map is the first of its kind to represent, in detail, the whole process relevant to all façade types, from commencement of the façade consultant’s and contactor’s participation, to the end of their involvement. The paper describes the process by which the mapping notation was selected, followed by the development and verification of the process map, including testing in two independent research projects. The BuildingSMART’s BPMN notation is found to have superior system features and comprehensibility for this application and the resulting process map is easy to interpret and verify by industry experts. The trialling of the map in the two research projects indicate that the map is a useful tool for assessing process improvements in the façades sector.

  13. An Experiment in Mind-Mapping and Argument-Mapping: Tools for Assessing Outcomes in the Business Curriculum

    Science.gov (United States)

    Gargouri, Chanaz; Naatus, Mary Kate

    2017-01-01

    Distinguished from other teaching-learning tools, such as mind and concept mapping in which students draw pictures and concepts and show relationships and correlation between them to demonstrate their own understanding of complex concepts, argument mapping is used to demonstrate clarity of reasoning, based on supporting evidence, and come to a…

  14. Computational Tools for RF Structure Design

    CERN Document Server

    Jensen, E

    2004-01-01

    The Finite Differences Method and the Finite Element Method are the two principally employed numerical methods in modern RF field simulation programs. The basic ideas behind these methods are explained, with regard to available simulation programs. We then go through a list of characteristic parameters of RF structures, explaining how they can be calculated using these tools. With the help of these parameters, we introduce the frequency-domain and the time-domain calculations, leading to impedances and wake-fields, respectively. Subsequently, we present some readily available computer programs, which are in use for RF structure design, stressing their distinctive features and limitations. One final example benchmarks the precision of different codes for calculating the eigenfrequency and Q of a simple cavity resonator.

  15. A Framework for IT-based Design Tools

    DEFF Research Database (Denmark)

    Hartvig, Susanne C

    The thesis presents a new apprach to develop design tools that can be integrated, bypresenting a framework consisting of a set of guidelines for design tools, an integration andcommunication scheme, and a set of design tool schemes.This framework has been based onanalysis of requirements to integ...... to integrated design enviornments, and analysis of engineeringdesign and design problem solving methods. And the developed framework has been testedby applying it to development of prototype design tools for realistic design scenarios.......The thesis presents a new apprach to develop design tools that can be integrated, bypresenting a framework consisting of a set of guidelines for design tools, an integration andcommunication scheme, and a set of design tool schemes.This framework has been based onanalysis of requirements...

  16. Software Tools for Battery Design | Transportation Research | NREL

    Science.gov (United States)

    Software Tools for Battery Design Software Tools for Battery Design Under the Computer-Aided Engineering for Electric Drive Vehicle Batteries (CAEBAT) project, NREL has developed software tools to help using CAEBAT software tools. Knowledge of the interplay of multi-physics at varied scales is imperative

  17. Rapid Offline-Online Post-Disaster Landslide Mapping Tool: A case study from Nepal

    Science.gov (United States)

    Olyazadeh, Roya; Jaboyedoff, Michel; Sudmeier-Rieux, Karen; Derron, Marc-Henri; Devkota, Sanjaya

    2016-04-01

    One of the crucial components of post disaster management is the efficient mapping of impacted areas. Here we present a tool designed to map landslides and affected objects after the earthquakes of 2015 in Nepal as well as for intense rainfall impact. Because internet is not available in many rural areas of Nepal, we developed an offline-online prototype based on Open-Source WebGIS technologies to make data on hazard impacts, including damaged infrastructure, landslides or flooding events available to authorities and the general public. This mobile application was designed as a low-cost, rapid and participatory method for recording impacts from hazard events. It is possible to record such events offline and upload them through a server, where internet connection is available. This application allows user authentication, image capturing, and information collation such as geolocation, event description, interactive mapping and finally storing all the data in the server for further analysis and visualisation. This application can be accessed by a mobile phone (Android) or a tablet as a hybrid version for both offline and online versions. The offline version has an interactive-offline map function which allows users to upload satellites image in order to improve ground truthing interpretation. After geolocation, the user can start mapping and then save recorded data into Geojson-TXT files that can be easily uploaded to the server whenever internet is available. This prototype was tested specifically for a rapid assessment of landslides and relevant land use characteristics such as roads, forest area, rivers in the Phewa Lake watershed near Pokhara, Nepal where a large number landslides were activated or reactivated after the 2015 monsoon season. More than 60 landslides were recorded during two days of field trip. Besides, it is possible to use this application for any other kind of hazard event like flood, avalanche, etc. Keywords: Offline, Online, Open source, Web

  18. Space mapping optimization algorithms for engineering design

    DEFF Research Database (Denmark)

    Koziel, Slawomir; Bandler, John W.; Madsen, Kaj

    2006-01-01

    A simple, efficient optimization algorithm based on space mapping (SM) is presented. It utilizes input SM to reduce the misalignment between the coarse and fine models of the optimized object over a region of interest, and output space mapping (OSM) to ensure matching of response and first...... to a benchmark problem. In comparison with SMIS, the models presented are simple and have a small number of parameters that need to be extracted. The new algorithm is applied to the optimization of coupled-line band-pass filter....

  19. Designing typefaces for maps. A protocol of tests.

    Science.gov (United States)

    Biniek, Sébastien; Touya, Guillaume; Rouffineau, Gilles; Huot-Marchand, Thomas

    2018-05-01

    The text management in map design is a topic generally linked to placement and composition issues. Whereas the type design issue is rarely addressed or at least only partially. Moreover the typefaces especially designed for maps are rare. This paper presents a protocol of tests to evaluate characters for digital topographic maps and fonts that were designed for the screen through the use of geographical information systems using this protocol. It was launched by the Atelier National de Recherche Typographique Research (ANRT, located in Nancy, France) and took place over his `post-master' course in 2013. The purpose is to isolate different issues inherent to text in a topographic map: map background, nonlinear text placement and toponymic hierarchies. Further research is necessary to improve this kind of approach.

  20. Short Paper: Design Tools, Hybridization Exploring Intuitive Interaction

    NARCIS (Netherlands)

    Wendrich, Robert E.; Kuhlen, Torsten; Coquillart, Sabine; Interrante, Victoria

    2010-01-01

    Design and Design Engineering is about making abstract representations often based on fuzzy notions, ideas or prerequisite requirements with the use of various design tools. This paper introduces an interactive hybrid design tool to assist and support singular design activity or multiple

  1. Concept-Mapping Tools and the Development of Students' Critical-Thinking Skills

    Science.gov (United States)

    Tseng, Sheng-Shiang

    2015-01-01

    Developing students' critical-thinking skills has recently received attention at all levels of education. This article proposes the use of concept-mapping tools to improve students' critical-thinking skills. The article introduces a Web-based concept-mapping tool--Popplet--and demonstrates its application for teaching critical-thinking skills in…

  2. Teachers' Perceptions of Esri Story Maps as Effective Teaching Tools

    Science.gov (United States)

    Strachan, Caitlin; Mitchell, Jerry

    2014-01-01

    The current study explores teachers' perceptions of Esri Story Maps as effective teaching tools. Story Maps are a relatively new web application created using Esri's cloud-based GIS platform, ArcGIS Online. They combine digitized, dynamic web maps with other story elements to help the creator effectively convey a message. The relative ease…

  3. CloudAligner: A fast and full-featured MapReduce based tool for sequence mapping

    Directory of Open Access Journals (Sweden)

    Shi Weisong

    2011-06-01

    Full Text Available Abstract Background Research in genetics has developed rapidly recently due to the aid of next generation sequencing (NGS. However, massively-parallel NGS produces enormous amounts of data, which leads to storage, compatibility, scalability, and performance issues. The Cloud Computing and MapReduce framework, which utilizes hundreds or thousands of shared computers to map sequencing reads quickly and efficiently to reference genome sequences, appears to be a very promising solution for these issues. Consequently, it has been adopted by many organizations recently, and the initial results are very promising. However, since these are only initial steps toward this trend, the developed software does not provide adequate primary functions like bisulfite, pair-end mapping, etc., in on-site software such as RMAP or BS Seeker. In addition, existing MapReduce-based applications were not designed to process the long reads produced by the most recent second-generation and third-generation NGS instruments and, therefore, are inefficient. Last, it is difficult for a majority of biologists untrained in programming skills to use these tools because most were developed on Linux with a command line interface. Results To urge the trend of using Cloud technologies in genomics and prepare for advances in second- and third-generation DNA sequencing, we have built a Hadoop MapReduce-based application, CloudAligner, which achieves higher performance, covers most primary features, is more accurate, and has a user-friendly interface. It was also designed to be able to deal with long sequences. The performance gain of CloudAligner over Cloud-based counterparts (35 to 80% mainly comes from the omission of the reduce phase. In comparison to local-based approaches, the performance gain of CloudAligner is from the partition and parallel processing of the huge reference genome as well as the reads. The source code of CloudAligner is available at http

  4. CloudAligner: A fast and full-featured MapReduce based tool for sequence mapping.

    Science.gov (United States)

    Nguyen, Tung; Shi, Weisong; Ruden, Douglas

    2011-06-06

    Research in genetics has developed rapidly recently due to the aid of next generation sequencing (NGS). However, massively-parallel NGS produces enormous amounts of data, which leads to storage, compatibility, scalability, and performance issues. The Cloud Computing and MapReduce framework, which utilizes hundreds or thousands of shared computers to map sequencing reads quickly and efficiently to reference genome sequences, appears to be a very promising solution for these issues. Consequently, it has been adopted by many organizations recently, and the initial results are very promising. However, since these are only initial steps toward this trend, the developed software does not provide adequate primary functions like bisulfite, pair-end mapping, etc., in on-site software such as RMAP or BS Seeker. In addition, existing MapReduce-based applications were not designed to process the long reads produced by the most recent second-generation and third-generation NGS instruments and, therefore, are inefficient. Last, it is difficult for a majority of biologists untrained in programming skills to use these tools because most were developed on Linux with a command line interface. To urge the trend of using Cloud technologies in genomics and prepare for advances in second- and third-generation DNA sequencing, we have built a Hadoop MapReduce-based application, CloudAligner, which achieves higher performance, covers most primary features, is more accurate, and has a user-friendly interface. It was also designed to be able to deal with long sequences. The performance gain of CloudAligner over Cloud-based counterparts (35 to 80%) mainly comes from the omission of the reduce phase. In comparison to local-based approaches, the performance gain of CloudAligner is from the partition and parallel processing of the huge reference genome as well as the reads. The source code of CloudAligner is available at http://cloudaligner.sourceforge.net/ and its web version is at http

  5. fMRI paradigm designing and post-processing tools

    International Nuclear Information System (INIS)

    James, Jija S; Rajesh, PG; Chandran, Anuvitha VS; Kesavadas, Chandrasekharan

    2014-01-01

    In this article, we first review some aspects of functional magnetic resonance imaging (fMRI) paradigm designing for major cognitive functions by using stimulus delivery systems like Cogent, E-Prime, Presentation, etc., along with their technical aspects. We also review the stimulus presentation possibilities (block, event-related) for visual or auditory paradigms and their advantage in both clinical and research setting. The second part mainly focus on various fMRI data post-processing tools such as Statistical Parametric Mapping (SPM) and Brain Voyager, and discuss the particulars of various preprocessing steps involved (realignment, co-registration, normalization, smoothing) in these software and also the statistical analysis principles of General Linear Modeling for final interpretation of a functional activation result

  6. Waste To Biogas Mapping Tool | Pacific Southwest, Region 9 ...

    Science.gov (United States)

    2018-04-10

    Interactive map (California, Arizona, Hawaii, Nevada) showing the location and contact information to connect organic waste producers and potential users. Add your business, ensure your information is correct.

  7. Visualizing the Past: The Design of a Temporally Enabled Map for Presentation (TEMPO

    Directory of Open Access Journals (Sweden)

    Nathan Prestopnik

    2012-01-01

    Full Text Available We present a design case for a prototype visualization tool called the Temporally Enabled Map for Presentation (TEMPO. Designed for use in the lecture classroom, TEMPO is an interactive animated map that addressed a common problem in military history: the shortcomings of traditional static (non-interactive, non-animated maps. Static maps show spatial elements well, but cannot do more than approximate temporal events using multiple views, movement arrows, and the like. TEMPO provides a more complete view of past historical events by showing them from start to finish. In our design case we describe our development process, which included consultation with military history domain experts, classroom observations, application of techniques derived from visualization and Human-Computer Interaction (HCI literature and theory. Our design case shows how the design of an educational tool can motivate scholarly evaluation, and we describe how some theories were first embraced and then rejected as design circumstances required. Finally, we explore a future direction for TEMPO, tools to support creative interactions with visualizations where students or instructors can learn by visualizing historical events for themselves. A working version of the finished TEMPO artifact is included as an interactive element in this document.

  8. Improving design processes through structured reflection : a prototype software tool

    OpenAIRE

    Reymen, I.M.M.J.; Melby, E.

    2001-01-01

    A prototype software tool facilitating the use of a design method supporting structured reflection on design processes is presented. The prototype, called Echo, has been developed to explore the benefits of using a software system to facilitate the use of the design method. Both the prototype software tool and the design method are developed as part of the Ph.D. project of Isabelle Reymen. The goal of the design method is supporting designers with reflection on design processes in a systemati...

  9. A mapping of design decision-making

    DEFF Research Database (Denmark)

    Hansen, Claus Thorp; Andreasen, Mogens Myrup

    2004-01-01

    In this paper we present the decision score, which is a model of decision-making seen in the engineering designer's perspective of the design process dynamics, where a decision has multiple objects and where it is based on earlier decisions, prediction of consequences and design process progressi...

  10. Bibliometric mapping as a science policy and research management tool

    NARCIS (Netherlands)

    Noyons, Everard Christiaan Marie

    1999-01-01

    Bibliometric maps of science are landscapes of scientific research fields created by quantitative analysis of bibliographic data. In such maps the 'cities' are, for instance, research topics. Topics with a strong cognitive relation are in each other's vicinity and topics with a weak relation are

  11. Support vector machine: a tool for mapping mineral prospectivity

    NARCIS (Netherlands)

    Zuo, R.; Carranza, E.J.M

    2011-01-01

    In this contribution, we describe an application of support vector machine (SVM), a supervised learning algorithm, to mineral prospectivity mapping. The free R package e1071 is used to construct a SVM with sigmoid kernel function to map prospectivity for Au deposits in western Meguma Terrain of Nova

  12. An Electronic Engineering Curriculum Design Based on Concept-Mapping Techniques

    Science.gov (United States)

    Toral, S. L.; Martinez-Torres, M. R.; Barrero, F.; Gallardo, S.; Duran, M. J.

    2007-01-01

    Curriculum design is a concern in European Universities as they face the forthcoming European Higher Education Area (EHEA). This process can be eased by the use of scientific tools such as Concept-Mapping Techniques (CMT) that extract and organize the most relevant information from experts' experience using statistics techniques, and helps a…

  13. Reusing Design Knowledge Based on Design Cases and Knowledge Map

    Science.gov (United States)

    Yang, Cheng; Liu, Zheng; Wang, Haobai; Shen, Jiaoqi

    2013-01-01

    Design knowledge was reused for innovative design work to support designers with product design knowledge and help designers who lack rich experiences to improve their design capacity and efficiency. First, based on the ontological model of product design knowledge constructed by taxonomy, implicit and explicit knowledge was extracted from some…

  14. Tools for Material Design and Selection

    Science.gov (United States)

    Wehage, Kristopher

    The present thesis focuses on applications of numerical methods to create tools for material characterization, design and selection. The tools generated in this work incorporate a variety of programming concepts, from digital image analysis, geometry, optimization, and parallel programming to data-mining, databases and web design. The first portion of the thesis focuses on methods for characterizing clustering in bimodal 5083 Aluminum alloys created by cryomilling and powder metallurgy. The bimodal samples analyzed in the present work contain a mixture of a coarse grain phase, with a grain size on the order of several microns, and an ultra-fine grain phase, with a grain size on the order of 200 nm. The mixing of the two phases is not homogeneous and clustering is observed. To investigate clustering in these bimodal materials, various microstructures were created experimentally by conventional cryomilling, Hot Isostatic Pressing (HIP), Extrusion, Dual-Mode Dynamic Forging (DMDF) and a new 'Gradient' cryomilling process. Two techniques for quantitative clustering analysis are presented, formulated and implemented. The first technique, the Area Disorder function, provides a metric of the quality of coarse grain dispersion in an ultra-fine grain matrix and the second technique, the Two-Point Correlation function, provides a metric of long and short range spatial arrangements of the two phases, as well as an indication of the mean feature size in any direction. The two techniques are implemented on digital images created by Scanning Electron Microscopy (SEM) and Electron Backscatter Detection (EBSD) of the microstructures. To investigate structure--property relationships through modeling and simulation, strategies for generating synthetic microstructures are discussed and a computer program that generates randomized microstructures with desired configurations of clustering described by the Area Disorder Function is formulated and presented. In the computer program, two

  15. Space Mapping With Adaptive Response Correction for Microwave Design Optimization

    DEFF Research Database (Denmark)

    Koziel, S.; Bandler, J.W.; Madsen, Kaj

    2009-01-01

    at which the term was calculated, as in the surrogate model optimization process. In this paper, an adaptive response correction scheme is presented to work in conjunction with space-mapping optimization algorithms. This technique is designed to alleviate the difficulties of the standard output space......Output space mapping is a technique introduced to enhance the robustness of the space-mapping optimization process in case the space-mapped coarse model cannot provide sufficient matching with the fine model. The technique often works very well; however, in some cases it fails. Especially...

  16. The Generic Mapping Tools 6: Classic versus Modern Mode

    Science.gov (United States)

    Wessel, P.; Uieda, L.; Luis, J. M. F.; Scharroo, R.; Smith, W. H. F.; Wobbe, F.

    2017-12-01

    The Generic Mapping Tools (GMT; gmt.soest.hawaii.edu) is a 25-year old, mature open-source software package for the analysis and display of geoscience data (e.g., interpolate, filter, manipulate, project and plot temporal and spatial data). The GMT "toolbox" includes about 80 core and 40 supplemental modules sharing a common set of command options, file structures, and documentation. GMT5, when released in 2013, introduced an application programming interface (API) to allow programmatic access to GMT from other computing environments. Since then, we have released a GMT/MATLAB toolbox, an experimental GMT/Julia package, and will soon introduce a GMT/Python module. In developing these extensions, we wanted to simplify the GMT learning curve but quickly realized the main stumbling blocks to GMT command-line mastery would be ported to the external environments unless we introduced major changes. With thousands of GMT scripts already in use by scientists around the world, we were acutely aware of the need for backwards compatibility. Our solution, to be released as GMT 6, was to add a modern run mode that complements the classic mode offered so far. Modern mode completely eliminates the top three obstacles for new (and not so new) GMT users: (1) The responsibility to properly stack PostScript layers manually (i.e., the -O -K dance), (2) the responsibility of handling output redirection of PostScript (create versus append), and (3) the need to provide commands with repeated information about regions (-R) and projections (-J). Thus, modern mode results in shorter, simpler scripts with fewer pitfalls, without interfering with classic scripts. Our implementation adds five new commands that begin and end a modern session, simplify figure management, automate the conversion of PostScript to more suitable formats, automate region detection, and offer a new automated subplot environment for multi-panel illustrations. Here, we highlight the GMT modern mode and the

  17. Design Package for Fuel Retrieval System Fuel Handling Tool Modification

    International Nuclear Information System (INIS)

    TEDESCHI, D.J.

    2000-01-01

    This is a design package that contains the details for a modification to a tool used for moving fuel elements during loading of MCO Fuel Baskets for the Fuel Retrieval System. The tool is called the fuel handling tool (or stinger). This document contains requirements, development design information, tests, and test reports

  18. Design of an on-chip reflectance map

    NARCIS (Netherlands)

    Terwisscha van Scheltinga, Jeroen; Smit, Jaap; Bosma, Marco

    1995-01-01

    A reflectance map design is described which uses a minimal amount of memory for the table, in order to be applicable as an on-chip shader. The shader is designed for use with the volumetric super resolution hardware, which performs shading at supersampled locations. However, the design may be used

  19. Preliminary bridge design navigation tool for novices

    OpenAIRE

    Boulanger, Sylvie

    1997-01-01

    The motivation of the thesis comes from the frustrations of young engineers confronted with real design problems. The inspiration of the thesis evolved from observations of bridge designers and analyses of bridge design competitions. Not only do designers adopt more than one strategy during design, they rarely perform a fixed sequence of tasks. Not only do designers consider more than one criterion during design, their priorities shift during the determination of parameters. The choice of tas...

  20. Preliminary bridge design navigation tool for novices

    OpenAIRE

    Boulanger, Sylvie; Hirt, Manfred A.

    2008-01-01

    The motivation of the thesis comes from the frustrations of young engineers confronted with real design problems. The inspiration of the thesis evolved from observations of bridge designers and analyses of bridge design competitions. Not only do designers adopt more than one strategy during design, they rarely perform a fixed sequence of tasks. Not only do designers consider more than one criterion during design, their priorities shift during the determination of parameters. The choice of tas...

  1. Customized Body Mapping to Facilitate the Ergonomic Design of Sportswear.

    Science.gov (United States)

    Cao, Mingliang; Li, Yi; Guo, Yueping; Yao, Lei; Pan, Zhigeng

    2016-01-01

    A successful high-performance sportswear design that considers human factors should result in a significant increase in thermal comfort and reduce energy loss. The authors describe a body-mapping approach that facilitates the effective ergonomic design of sportswear. Their general framework can be customized based on the functional requirements of various sports and sportswear, the desired combination and selection of mapping areas for the human body, and customized quantitative data distribution of target physiological indicators.

  2. Increasing resilience through participative flood risk map design

    Science.gov (United States)

    Fuchs, Sven; Spira, Yvonne; Stickler, Therese

    2013-04-01

    In recent years, an increasing number of flood hazards has shown to the European Commission and the Member States of the European Union the importance of flood risk management strategies in order to reduce losses and to protect the environment and the citizens. Exposure to floods as well as flood vulnerability might increase across Europe due to the ongoing economic development in many EU countries. Thus even without taking climate change into account an increase of flood disasters in Europe might be foreseeable. These circumstances have produced a reaction in the European Commission, and a Directive on the Assessment and Management of Flood Risks was issued as one of the three components of the European Action Programme on Flood Risk Management. Floods have the potential to jeopardise economic development, above all due to an increase of human activities in floodplains and the reduction of natural water retention by land use activities. As a result, an increase in the likelihood and adverse impacts of flood events is expected. Therefore, concentrated action is needed at the European level to avoid severe impacts on human life and property. In order to have an effective tool available for gathering information, as well as a valuable basis for priority setting and further technical, financial and political decisions regarding flood risk mitigation and management, it is necessary to provide for the establishment of flood risk maps which show the potential adverse consequences associated with different flood scenarios. So far, hazard and risk maps are compiled in terms of a top-down linear approach: planning authorities take the responsibility to create and implement these maps on different national and local scales, and the general public will only be informed about the outcomes (EU Floods Directive, Article 10). For the flood risk management plans, however, an "active involvement of interested parties" is required, which means at least some kind of multilateral

  3. A GIS semiautomatic tool for classifying and mapping wetland soils

    Science.gov (United States)

    Moreno-Ramón, Héctor; Marqués-Mateu, Angel; Ibáñez-Asensio, Sara

    2016-04-01

    Wetlands are one of the most productive and biodiverse ecosystems in the world. Water is the main resource and controls the relationships between agents and factors that determine the quality of the wetland. However, vegetation, wildlife and soils are also essential factors to understand these environments. It is possible that soils have been the least studied resource due to their sampling problems. This feature has caused that sometimes wetland soils have been classified broadly. The traditional methodology states that homogeneous soil units should be based on the five soil forming-factors. The problem can appear when the variation of one soil-forming factor is too small to differentiate a change in soil units, or in case that there is another factor, which is not taken into account (e.g. fluctuating water table). This is the case of Albufera of Valencia, a coastal wetland located in the middle east of the Iberian Peninsula (Spain). The saline water table fluctuates throughout the year and it generates differences in soils. To solve this problem, the objectives of this study were to establish a reliable methodology to avoid that problems, and develop a GIS tool that would allow us to define homogeneous soil units in wetlands. This step is essential for the soil scientist, who has to decide the number of soil profiles in a study. The research was conducted with data from 133 soil pits of a previous study in the wetland. In that study, soil parameters of 401 samples (organic carbon, salinity, carbonates, n-value, etc.) were analysed. In a first stage, GIS layers were generated according to depth. The method employed was Bayesian Maxim Entropy. Subsequently, it was designed a program in GIS environment that was based on the decision tree algorithms. The goal of this tool was to create a single layer, for each soil variable, according to the different diagnostic criteria of Soil Taxonomy (properties, horizons and diagnostic epipedons). At the end, the program

  4. Potential and limitations of environmental design with LCA tools

    Directory of Open Access Journals (Sweden)

    Alexander Hollberg

    2017-10-01

    Full Text Available The built environment has a very high impact on the environment. Architects can largely define the environmental impact a building will cause throughout its lifetime through its design. Especially the choice of material and the type of construction can be influenced in early design stages. To quantify the environmental impact, tools for Life Cycle Assessment (LCA are used. This paper discusses the results of four case studies of applying four different novel LCA tools in four different academic courses at different universities. The results show that the success of applying LCA tools highly depends on the point of time during the design process and the design strategy the student pursues. If the right tool is used at the right moment and matches the design strategy, it can help to improve the architectural quality and reduce environmental impacts. In most cases however, the time of application did not fit, resulting in additional effort for applying the LCA tool. In consequence, the architectural elaboration of the design and the improvement of environmental performance compete against each other. Either the architectural quality suffers or the tool is employed late and the environmental performance cannot be improved. Even if the point in time of the tool application is right, the success depends highly on the design strategy. The number of tools is growing and there is an adequate tool available for each design stage. The design strategy has to match the tool and this requires a willingness to adapt the design approach. The issue of environmental design shifted from a lack of adequate tools to the lack of adequate design approaches. Tools can be easily taught in seminars. Environmental design strategies, however, have to be included in design studios and developed throughout the entire design phase to become part of architectural education.

  5. Genetic Map of Mango: A Tool for Mango Breeding

    Directory of Open Access Journals (Sweden)

    David N. Kuhn

    2017-04-01

    Full Text Available Mango (Mangifera indica is an economically and nutritionally important tropical/subtropical tree fruit crop. Most of the current commercial cultivars are selections rather than the products of breeding programs. To improve the efficiency of mango breeding, molecular markers have been used to create a consensus genetic map that identifies all 20 linkage groups in seven mapping populations. Polyembryony is an important mango trait, used for clonal propagation of cultivars and rootstocks. In polyembryonic mango cultivars, in addition to a zygotic embryo, several apomictic embryos develop from maternal tissue surrounding the fertilized egg cell. This trait has been associated with linkage group 8 in our consensus genetic map and has been validated in two of the seven mapping populations. In addition, we have observed a significant association between trait and single nucleotide polymorphism (SNP markers for the vegetative trait of branch habit and the fruit traits of bloom, ground skin color, blush intensity, beak shape, and pulp color.

  6. Digital Subtraction Angiography (DSA) "Road Map": An Angiographic Tool

    Science.gov (United States)

    Turski, P. A.; Stieghorst, M. F.; Strother, C. M.; Crummy, A. B.; Lieberman, R. P.; Mistretta, C. A.

    1982-12-01

    Continuous Digital subtraction combined with intraarterial injections of contrast medium permits the display of arterial structures during real time fluoroscopy. This DSA "road map" facilitates selective catheterization and has proved useful in interventional procedures.

  7. Design of a Three-Axis Machine Tool Module

    National Research Council Canada - National Science Library

    Childers, Marshal

    2003-01-01

    This report documents the design improvement process of the components in a tool module for a three-axis machine tool, which occurred during the period of March-April 2002 in support of a critical U.S...

  8. GIS cartography a guide to effective map design

    CERN Document Server

    Peterson, Gretchen N

    2014-01-01

    IntroductionOn Design ExperienceConstructive CriticismWhat Is a Geoprofessional?Tick-Tock Goes the ClockWhy Good Design MattersAudienceHow to Use This BookSkipping the How-Tos to Get Straight to the Good StuffRelative Map ScalesEndnotesCreative InspirationYou Can Be CreativeDoingSeeingAn Example of How to SeeApplying All of This to Your MapSummary and Final ProddingCreative MapsA Few Places to Start Seeing Art from Your DesktopEndnotesExerciseLayout DesignAll Together NowLayout ChecklistElement Details and ExamplesStyleContextArrangementEmphasis Maps and WireframesSimplicity versus ComplexityM

  9. Aviation Environmental Design Tool (AEDT) System Architecture

    Science.gov (United States)

    2007-01-29

    The Federal Aviation Administration's Office of Environment and Energy (FAA-AEE) is : developing a comprehensive suite of software tools that will allow for thorough assessment of the environmental effects of aviation. The main goal of the effort is ...

  10. Construction of concept maps as tool for Biochemistry learning

    Directory of Open Access Journals (Sweden)

    Silvia Lopes de Menezes

    2006-07-01

    Full Text Available The use of concept maps on the teaching of sciences has been object of worldwide research with different purposes: to detect the previous knowledge of the students on certain topics or to evaluate learning, among others. Based on Ausubel´s cognitive psychology, concept maps assume that the learning is accomplished by assimilation of new concepts and propositions to the students´ cognitive structure, contributing to establish links between the previous and new knowledge. It is especially interesting on the approach of interdisciplinary issues, as many studied in Biochemistry.The relevance of the use of concept maps on biochemistry learning was evaluated on a thirty-hour undergraduation optional course, with interdisciplinary topics, which are not usually included on introductory Biochemistry courses. The course Biochemistry of Animal Venoms was structured in seven module where the biochemical action mechanisms of the venoms of Crotalus sp (south american rattlesnake, Bothrops sp (jararaca, Loxosceles sp (brown spider, Tityus sp (yellow scorpion, Phoneutria sp (armed spider, Apis mellifera (honey bee and Latrodectus sp (black widowwere discussed. The students worked in small groups and, at each module, there were (1 an oriented study, guided by questions, texts and schemes, supervised by the teachers, (2 the construction of individual concept maps, where the local and systemic effects of the venoms should be predicted by their biochemical composition and (3 the construction of a new map by the group, incorporating the information of the individual maps. The difficulty level of these tasks was gradually increased throughout the course, with lesser time to carry out the tasks, lesser assistance during the oriented study and even lesser information on the venom effects.The course assessment was given by the number, quality and correction of the concepts relationship present in the concept maps, through a questionnaire and by the

  11. Design Tool for 5-20 MW Direct Drive Generators

    DEFF Research Database (Denmark)

    Leban, Krisztina Monika; Ritchie, Ewen; Argeseanu, Alin

    2014-01-01

    This paper reports on a machine design tool for large (5-10MW) direct drive electrical generator. The aim of the work is to construct a flexible calculation tool that enables the analysis of different ideas and concepts for generator design. The tool is intended for engineers that are involved...... in the design of wind turbine systems. The design tool comprises calculation modules that are kept as independent as possible from each other so that new machine geometries and types can be modelled by reusing, recombining and modifying the different modules. Choice of the most suitable candidates...

  12. Safety design for machine tools and installation

    International Nuclear Information System (INIS)

    Lee, Myung Jae; Lee, Jong Hyung

    1986-01-01

    Recently, there occur many damages and disasters due to mistakes in designing, and the author has attempted measures for effective prevention of damages. For this purpose, the author collected the theses on accidents due to poor designs and their measures. Many accidents are blamed for their poor designs as their causes. The way to prevent mistakes in designing is to keep in file the cases of such accidents for a system to be ready for use whenever needed. (Author)

  13. FEDERAL USERS CONFERENCE PRODUCT LINE TOOL SET (PLTS) MAP PRODUCTION SYSTEM (MPS) ATLAS CUSTOM GRIDS [Rev 0 was draft

    Energy Technology Data Exchange (ETDEWEB)

    HAYENGA, J.L.

    2006-12-19

    Maps, and more importantly Atlases, are assisting the user community in managing a large land area with complex issues, the most complex of which is the management of nuclear waste. The techniques and experiences discussed herein were gained while developing several atlases for use at the US Department of Energy's Hanford Site. The user community requires the ability to locate not only waste sites, but other features as well. Finding a specific waste site on a map and in the field is a difficult task at a site the size of Hanford. To find a specific waste site, the user begins by locating the item or object in an index, then locating the feature on the corresponding map within an atlas. Locating features requires a method for indexing them. The location index and how to place it on a map or atlas is the central theme presented in this article. The user requirements for atlases forced the design team to develop new and innovative solutions for requirements that Product Line Tool Set (PLTS) Map Production System (MPS)-Atlas was not designed to handle. The layout of the most complex atlases includes custom reference grids, multiple data frames, multiple map series, and up to 250 maps. All of these functional requirements are at the extreme edge of the capabilities of PLTS MPS-Atlas. This document outlines the setup of an atlas using PLTS MPS-Atlas to meet these requirements.

  14. FEDERAL USERS CONFERENCE PRODUCT LINE TOOL SET (PLTS) MAP PRODUCTION SYSTEM (MPS) ATLAS CUSTOM GRIDS [Rev 0 was draft

    International Nuclear Information System (INIS)

    HAYENGA, J.L.

    2006-01-01

    Maps, and more importantly Atlases, are assisting the user community in managing a large land area with complex issues, the most complex of which is the management of nuclear waste. The techniques and experiences discussed herein were gained while developing several atlases for use at the US Department of Energy's Hanford Site. The user community requires the ability to locate not only waste sites, but other features as well. Finding a specific waste site on a map and in the field is a difficult task at a site the size of Hanford. To find a specific waste site, the user begins by locating the item or object in an index, then locating the feature on the corresponding map within an atlas. Locating features requires a method for indexing them. The location index and how to place it on a map or atlas is the central theme presented in this article. The user requirements for atlases forced the design team to develop new and innovative solutions for requirements that Product Line Tool Set (PLTS) Map Production System (MPS)-Atlas was not designed to handle. The layout of the most complex atlases includes custom reference grids, multiple data frames, multiple map series, and up to 250 maps. All of these functional requirements are at the extreme edge of the capabilities of PLTS MPS-Atlas. This document outlines the setup of an atlas using PLTS MPS-Atlas to meet these requirements

  15. SUVI Thematic Maps: A new tool for space weather forecasting

    Science.gov (United States)

    Hughes, J. M.; Seaton, D. B.; Darnel, J.

    2017-12-01

    The new Solar Ultraviolet Imager (SUVI) instruments aboard NOAA's GOES-R series satellites collect continuous, high-quality imagery of the Sun in six wavelengths. SUVI imagers produce at least one image every 10 seconds, or 8,640 images per day, considerably more data than observers can digest in real time. Over the projected 20-year lifetime of the four GOES-R series spacecraft, SUVI will provide critical imagery for space weather forecasters and produce an extensive but unwieldy archive. In order to condense the database into a dynamic and searchable form we have developed solar thematic maps, maps of the Sun with key features, such as coronal holes, flares, bright regions, quiet corona, and filaments, identified. Thematic maps will be used in NOAA's Space Weather Prediction Center to improve forecaster response time to solar events and generate several derivative products. Likewise, scientists use thematic maps to find observations of interest more easily. Using an expert-trained, naive Bayesian classifier to label each pixel, we create thematic maps in real-time. We created software to collect expert classifications of solar features based on SUVI images. Using this software, we compiled a database of expert classifications, from which we could characterize the distribution of pixels associated with each theme. Given new images, the classifier assigns each pixel the most appropriate label according to the trained distribution. Here we describe the software to collect expert training and the successes and limitations of the classifier. The algorithm excellently identifies coronal holes but fails to consistently detect filaments and prominences. We compare the Bayesian classifier to an artificial neural network, one of our attempts to overcome the aforementioned limitations. These results are very promising and encourage future research into an ensemble classification approach.

  16. Body Mapping as a Youth Sexual Health Intervention and Data Collection Tool.

    Science.gov (United States)

    Lys, Candice; Gesink, Dionne; Strike, Carol; Larkin, June

    2018-06-01

    In this article, we describe and evaluate body mapping as (a) an arts-based activity within Fostering Open eXpression Among Youth (FOXY), an educational intervention targeting Northwest Territories (NWT) youth, and (b) a research data collection tool. Data included individual interviews with 41 female participants (aged 13-17 years) who attended FOXY body mapping workshops in six communities in 2013, field notes taken by the researcher during the workshops and interviews, and written reflections from seven FOXY facilitators on the body mapping process (from 2013 to 2016). Thematic analysis explored the utility of body mapping using a developmental evaluation methodology. The results show body mapping is an intervention tool that supports and encourages participant self-reflection, introspection, personal connectedness, and processing difficult emotions. Body mapping is also a data collection catalyst that enables trust and youth voice in research, reduces verbal communication barriers, and facilitates the collection of rich data regarding personal experiences.

  17. Mapping Design Students' Aesthetic and Visual Preference

    DEFF Research Database (Denmark)

    Raahauge, Kirsten Marie; Ohrt, Ann Merete

    2016-01-01

    2014). The students were asked to create a “Wunderkammer” of personal collected images and things from their local cultural and physical environment. The focus of the workshops is collecting and organizing objects from the studens visual explorations within the following topics: body, home, urban space......, identity, and cultural codes. The workshops are documented, analysed and compared in order to get a better understanding of how, and if, different universities’ learning methods and cultural backgrounds influence the students’ design approaches, practices and conceptions. In this way we hope to broaden...

  18. Notebooks as didactic tool in design education

    NARCIS (Netherlands)

    Van den Toorn, M.W.M.; Have, R.

    2012-01-01

    Notebooks are an important didactic tool both for students and teaching staff. The idea of notebooks is that the daily work and thinking is reflected in notes, drawings, sketches, diagrams. Keeping track of the content of daily work can give an idea of the evolution and development of ideas.

  19. Designing a Tool for History Textbook Analysis

    Directory of Open Access Journals (Sweden)

    Katalin Eszter Morgan

    2012-11-01

    Full Text Available This article describes the process by which a five-dimensional tool for history textbook analysis was conceptualized and developed in three stages. The first stage consisted of a grounded theory approach to code the content of the sampled chapters of the books inductively. After that the findings from this coding process were combined with principles of text analysis as derived from the literature, specifically focusing on the notion of semiotic mediation as theorized by Lev VYGOTSKY. We explain how we then entered the third stage of the development of the tool, comprising five dimensions. Towards the end of the article we show how the tool could be adapted to serve other disciplines as well. The argument we forward in the article is for systematic and well theorized tools with which to investigate textbooks as semiotic mediators in education. By implication, textbook authors can also use these as guidelines. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs130170

  20. Designing a Pediatric Severe Sepsis Screening Tool

    Directory of Open Access Journals (Sweden)

    Robert eSepanski

    2014-06-01

    Full Text Available We sought to create a screening tool with improved predictive value for pediatric severe sepsis and septic shock that can be incorporated into the electronic medical record and actively screen all patients arriving at a pediatric Emergency Department (ED. Gold standard severe sepsis cases were identified using a combination of coded discharge diagnosis and physician chart review from 7,402 children who visited a pediatric ED over two months. The tool’s identification of severe sepsis was initially based on International Consensus Conference on Pediatric Sepsis (ICCPS parameters that were refined by an iterative, virtual process that allowed us to propose successive changes in sepsis detection parameters in order to optimize the tool’s predictive value based on receiver operating curve (ROC characteristics. Age-specific normal and abnormal values for heart rate (HR and respiratory rate (RR were empirically derived from 143,603 children seen in a second pediatric ED over three years. Univariate analyses were performed for each measure in the tool to assess its association with severe sepsis and to characterize it as an early or late indicator of severe sepsis. A split-sample was used to validate the final, optimized tool. The final tool incorporated age-specific thresholds for abnormal HR and RR and employed a linear temperature correction for each category. The final tool’s positive predictive value was 48.7%, a significant, nearly three-fold improvement over the original ICCPS tool. False positive Systemic Inflammatory Response Syndrome (SIRS identifications were nearly six-fold lower.

  1. Evidence gap maps -- a tool for promoting evidence-informed policy and prioritizing future research

    OpenAIRE

    Snilstveit, Birte; Vojtkova, Martina; Bhavsar, Ami; Gaarder, Marie

    2013-01-01

    Evidence-gap maps present a new addition to the tools available to support evidence-informed policy making. Evidence-gap maps are thematic evidence collections covering a range of issues such as maternal health, HIV/AIDS, and agriculture. They present a visual overview of existing systematic reviews or impact evaluations in a sector or subsector, schematically representing the types of int...

  2. Concept mapping and text writing as learning tools in problem-oriented learning

    NARCIS (Netherlands)

    Fürstenau, B.; Kneppers, L.; Dekker, R.; Cañas, A.J.; Novak, J.D.; Vanhaer, J.

    2012-01-01

    In two studies we investigated whether concept mapping or summary writing better support students while learning from authentic problems in the field of business. We interpret concept mapping and summary writing as elaboration tools aiming at helping students to understand new information, and to

  3. Design Tools for Reconfigurable Hardware in Orbit (RHinO)

    Science.gov (United States)

    French, Mathew; Graham, Paul; Wirthlin, Michael; Larchev, Gregory; Bellows, Peter; Schott, Brian

    2004-01-01

    The Reconfigurable Hardware in Orbit (RHinO) project is focused on creating a set of design tools that facilitate and automate design techniques for reconfigurable computing in space, using SRAM-based field-programmable-gate-array (FPGA) technology. These tools leverage an established FPGA design environment and focus primarily on space effects mitigation and power optimization. The project is creating software to automatically test and evaluate the single-event-upsets (SEUs) sensitivities of an FPGA design and insert mitigation techniques. Extensions into the tool suite will also allow evolvable algorithm techniques to reconfigure around single-event-latchup (SEL) events. In the power domain, tools are being created for dynamic power visualiization and optimization. Thus, this technology seeks to enable the use of Reconfigurable Hardware in Orbit, via an integrated design tool-suite aiming to reduce risk, cost, and design time of multimission reconfigurable space processors using SRAM-based FPGAs.

  4. Regression analysis as a design optimization tool

    Science.gov (United States)

    Perley, R.

    1984-01-01

    The optimization concepts are described in relation to an overall design process as opposed to a detailed, part-design process where the requirements are firmly stated, the optimization criteria are well established, and a design is known to be feasible. The overall design process starts with the stated requirements. Some of the design criteria are derived directly from the requirements, but others are affected by the design concept. It is these design criteria that define the performance index, or objective function, that is to be minimized within some constraints. In general, there will be multiple objectives, some mutually exclusive, with no clear statement of their relative importance. The optimization loop that is given adjusts the design variables and analyzes the resulting design, in an iterative fashion, until the objective function is minimized within the constraints. This provides a solution, but it is only the beginning. In effect, the problem definition evolves as information is derived from the results. It becomes a learning process as we determine what the physics of the system can deliver in relation to the desirable system characteristics. As with any learning process, an interactive capability is a real attriubute for investigating the many alternatives that will be suggested as learning progresses.

  5. Program Design Report of the CNC Machine Tool(II)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H

    2007-06-15

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology.

  6. Program Design Report of the CNC Machine Tool(II)

    International Nuclear Information System (INIS)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H.

    2007-06-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  7. Program Design Report of the CNC Machine Tool(III)

    International Nuclear Information System (INIS)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.; Lee, I. B.; Yoon, K. B.; Lee, C. K.; Youm, J. H.

    2008-08-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  8. Program Design Report of the CNC Machine Tool(IV)

    International Nuclear Information System (INIS)

    Youm, Ki Un; Lee, I. B.; Youm, J. H.

    2009-09-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  9. Program Design Report of the CNC Machine Tool (I)

    International Nuclear Information System (INIS)

    Kim, Jong Kiun; Youm, K. U.; Kim, K. S.

    2006-08-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  10. Principal tools for exploring the brain and mapping its activity

    International Nuclear Information System (INIS)

    Mazoyer, B.; Mashaal, M.

    1996-01-01

    The electro-encephalography (EEG), magneto-encephalography (MEG), scanner, positron computed tomography, single photon emission computed tomography (SPECT) and NMR imaging are the main methods used to explore human brain and to do a mapping of its activity. These methods are described into details (principle, visualization, uses, advantages, disadvantages). They can be useful to detect the possible anomalies of the human brain. (O.M.)

  11. Bioinformatic tools for PCR Primer design

    African Journals Online (AJOL)

    ES

    reaction (PCR), oligo hybridization and DNA sequencing. Proper primer design is actually one of the most important factors/steps in successful DNA sequencing. Various bioinformatics programs are available for selection of primer pairs from a template sequence. The plethora programs for PCR primer design reflects the.

  12. Engineer's Notebook--A Design Assessment Tool

    Science.gov (United States)

    Kelley, Todd R.

    2011-01-01

    As technology education continues to consider a move toward an engineering design focus as proposed by various leaders in technology education, it will be necessary to employ new pedagogical approaches. Hill (2006) provided some new perspectives regarding pedagogical approaches for technology education with an engineering design focus. One…

  13. Gradually including potential users: A tool to counter design exclusions.

    Science.gov (United States)

    Zitkus, Emilene; Langdon, Patrick; Clarkson, P John

    2018-01-01

    The paper describes an iterative development process used to understand the suitability of different inclusive design evaluation tools applied into design practices. At the end of this process, a tool named Inclusive Design Advisor was developed, combining data related to design features of small appliances with ergonomic task demands, anthropometric data and exclusion data. When auditing a new design the tool examines the exclusion that each design feature can cause, followed by objective recommendations directly related to its features. Interactively, it allows designers or clients to balance design changes with the exclusion caused. It presents the type of information that enables designers and clients to discuss user needs and make more inclusive design decisions. Copyright © 2017. Published by Elsevier Ltd.

  14. Design tools for complex dynamic security systems.

    Energy Technology Data Exchange (ETDEWEB)

    Byrne, Raymond Harry; Rigdon, James Brian; Rohrer, Brandon Robinson; Laguna, Glenn A.; Robinett, Rush D. III (.; ); Groom, Kenneth Neal; Wilson, David Gerald; Bickerstaff, Robert J.; Harrington, John J.

    2007-01-01

    The development of tools for complex dynamic security systems is not a straight forward engineering task but, rather, a scientific task where discovery of new scientific principles and math is necessary. For years, scientists have observed complex behavior but have had difficulty understanding it. Prominent examples include: insect colony organization, the stock market, molecular interactions, fractals, and emergent behavior. Engineering such systems will be an even greater challenge. This report explores four tools for engineered complex dynamic security systems: Partially Observable Markov Decision Process, Percolation Theory, Graph Theory, and Exergy/Entropy Theory. Additionally, enabling hardware technology for next generation security systems are described: a 100 node wireless sensor network, unmanned ground vehicle and unmanned aerial vehicle.

  15. Tools for Developing a Quality Management Program: Proactive Tools (Process Mapping, Value Stream Mapping, Fault Tree Analysis, and Failure Mode and Effects Analysis)

    International Nuclear Information System (INIS)

    Rath, Frank

    2008-01-01

    This article examines the concepts of quality management (QM) and quality assurance (QA), as well as the current state of QM and QA practices in radiotherapy. A systematic approach incorporating a series of industrial engineering-based tools is proposed, which can be applied in health care organizations proactively to improve process outcomes, reduce risk and/or improve patient safety, improve through-put, and reduce cost. This tool set includes process mapping and process flowcharting, failure modes and effects analysis (FMEA), value stream mapping, and fault tree analysis (FTA). Many health care organizations do not have experience in applying these tools and therefore do not understand how and when to use them. As a result there are many misconceptions about how to use these tools, and they are often incorrectly applied. This article describes these industrial engineering-based tools and also how to use them, when they should be used (and not used), and the intended purposes for their use. In addition the strengths and weaknesses of each of these tools are described, and examples are given to demonstrate the application of these tools in health care settings

  16. Gear cutting tools fundamentals of design and computation

    CERN Document Server

    Radzevich, Stephen P

    2010-01-01

    Presents the DG/K-based method of surface generation, a novel and practical mathematical method for designing gear cutting tools with optimal parameters. This book proposes a scientific classification for the various kinds of the gear machining meshes, discussing optimal designs of gear cutting tools.

  17. Comfort in using hand tools : theory, design and evaluation

    OpenAIRE

    Kuijt-Evers, L.F.M.

    2007-01-01

    Everyone uses hand tools in their daily life, like knife and fork. Moreover, many people use hand tools in their profession as well as during leisure time. It is important that they can work with hand tools that provide comfort. Until now, the avoidance of discomfort was emphasized during the design process of hand tools, like screwdrivers, hand saws and paint brushes. In the near future, the focus will shift towards providing comfort. However, some questions need to be answered to make this ...

  18. Design and development of progressive tool for manufacturing washer

    Science.gov (United States)

    Annigeri, Ulhas K.; Raghavendra Ravi Kiran, K.; Deepthi, Y. P.

    2017-07-01

    In a progressive tool the raw material is worked at different station to finally fabricate the component. A progressive tool is a lucrative tool for mass production of components. A lot of automobile and other transport industries develop progressive tool for the production of components. The design of tool involves lot of planning and the same amount of skill of process planning is required in the fabrication of the tool. The design also involves use of thumb rules and standard elements as per experience gained in practice. Manufacturing the press tool is a laborious task as special jigs and fixtures have to be designed for the purpose. Assembly of all the press tool elements is another task where use of accurate measuring instruments for alignment of various tool elements is important. In the present study, design and fabrication of progressive press tool for production of washer has been developed and the press tool has been tried out on a mechanical type of press. The components produced are to dimensions.

  19. Problem-solving tools for analyzing system problems. The affinity map and the relationship diagram.

    Science.gov (United States)

    Lepley, C J

    1998-12-01

    The author describes how to use two management tools, an affinity map and a relationship diagram, to define and analyze aspects of a complex problem in a system. The affinity map identifies the key influencing elements of the problem, whereas the relationship diagram helps to identify the area that is the most important element of the issue. Managers can use the tools to draw a map of problem drivers, graphically display the drivers in a diagram, and use the diagram to develop a cause-and-effect relationship.

  20. Design Tools and Workflows for Braided Structures

    DEFF Research Database (Denmark)

    Vestartas, Petras; Heinrich, Mary Katherine; Zwierzycki, Mateusz

    2017-01-01

    and merits of our method, demonstrated though four example design and analysis workflows. The workflows frame specific aspects of enquiry for the ongoing research project flora robotica. These include modelling target geometries, automatically producing instructions for fabrication, conducting structural...

  1. Representation stigma: Perceptions of tools and processes for design graphics

    Directory of Open Access Journals (Sweden)

    David Barbarash

    2016-12-01

    Full Text Available Practicing designers and design students across multiple fields were surveyed to measure preference and perception of traditional hand and digital tools to determine if common biases for an individual toolset are realized in practice. Significant results were found, primarily with age being a determinant in preference of graphic tools and processes; this finding demonstrates a hard line between generations of designers. Results show that while there are strong opinions in tools and processes, the realities of modern business practice and production gravitate towards digital methods despite a traditional tool preference in more experienced designers. While negative stigmas regarding computers remain, younger generations are more accepting of digital tools and images, which should eventually lead to a paradigm shift in design professions.

  2. META-X Design Flow Tools

    Science.gov (United States)

    2013-04-01

    Forces can be computed at specific angular positions, and geometrical parameters can be evaluated. Much higher resolution models are required, along...composition engines (C#, C++, Python, Java ) Desert operates on the CyPhy model, converting from a design space alternative structure to a set of design...consists of scripts to execute dymola, post-processing of results to create metrics, and general management of the job sequence. An earlier version created

  3. REQUIREMENTS PROCESSING TOOLS AND THE BUILDING DESIGNERS MOTIVATION ON USE

    Directory of Open Access Journals (Sweden)

    Camila Pegoraro

    2017-04-01

    Full Text Available The successful development of projects requires, among other conditions, the ability to process requirements. In the construction literature, researchers have figured out that human difficulties was often at the root of Requirements Processing (RP problems throughout the design phases, and that the employment of tools could be a key factor for RP implementation. To check these outcomes and to look at how current practitioners behave in relation to the RP tools, an exploratory case study was conducted with a building design team from a public university. The aim of this paper was to investigate the perception of benefits and the motivation of designers regarding the RP tools. The results indicated that 42% of the participants are highly motivated to use new tools and that they have more interest in tools that deal directly with design activities than in those focused on data. Validation tools aroused interest as the most useful tools for designers. 66,7% of the participants mentioned that the tools can make the design process clearer, and that training and adaptation are crucial to promote acceptance and commitment to RP. The main contribution is the indication of gaps for further research and for tools improvement from the designers’ perspective.

  4. Developing web map application based on user centered design

    Directory of Open Access Journals (Sweden)

    Petr Voldan

    2012-03-01

    Full Text Available User centred design is an approach in process of development any kind of human product where the main idea is to create a product for the end user. This article presents User centred design method in developing web mapping services. This method can be split into four main phases – user research, creation of concepts, developing with usability research and lunch of product. The article describes each part of this phase with an aim to provide guidelines for developers and primarily with an aim to improve the usability of web mapping services.

  5. Analysis of design tool attributes with regards to sustainability benefits

    Science.gov (United States)

    Zain, S.; Ismail, A. F.; Ahmad, Z.; Adesta, E. Y. T.

    2018-01-01

    The trend of global manufacturing competitiveness has shown a significant shift from profit and customer driven business to a more harmonious sustainability paradigm. This new direction, which emphasises the interests of three pillars of sustainability, i.e., social, economic and environment dimensions, has changed the ways products are designed. As a result, the roles of design tools in the product development stage of manufacturing in adapting to the new strategy are vital and increasingly challenging. The aim of this paper is to review the literature on the attributes of design tools with regards to the sustainability perspective. Four well-established design tools are selected, namely Quality Function Deployment (QFD), Failure Mode and Element Analysis (FMEA), Design for Six Sigma (DFSS) and Design for Environment (DfE). By analysing previous studies, the main attributes of each design tool and its benefits with respect to each sustainability dimension throughout four stages of product lifecycle are discussed. From this study, it is learnt that each of the design tools contributes to the three pillars of sustainability either directly or indirectly, but they are unbalanced and not holistic. Therefore, the prospective of improving and optimising the design tools is projected, and the possibility of collaboration between the different tools is discussed.

  6. Health risks maps. Modelling of air quality as a tool to map health risks

    International Nuclear Information System (INIS)

    Van Doorn, R.; Hegger, C.

    2000-01-01

    Environmental departments consider geographical maps with information on air quality as the final product of a complicated process of measuring, modelling and presentation. Municipal health departments consider such maps a useful starting point to solve the problem whether air pollution causes health risks for citizens. The answer to this question cannot be reduced to checking if threshold limit values are exceeded. Based on the results of measurements and modelling of concentrations of nitrogen dioxide in air, the health significance of air pollution caused by nitrogen dioxide is illuminated. A proposal is presented to map health risks of air pollution by using the results of measurements and modelling of air pollution. 7 refs

  7. Space Mapping and Beyond: Knowledge-Driven Microwave Design Optimization

    DEFF Research Database (Denmark)

    Koziel, Slawomir; Madsen, Kaj

    2012-01-01

    in such a low-fidelity model allows us to dramatically reduce the number of EM simulations necessary to find a satisfactory design. Here, we review the concept of knowledge-driven design as well as specific design techniques, including space mapping, simulation-based tuning, and various response correction...... models that can replace the CPU-intensive EM-simulated structure of interest in the search for optimum design. The surrogate models exploiting physically-based low-fidelity models (e.g., circuit equivalents) can be particularly efficient: the knowledge about the structure under design embedded...

  8. Design principles of metal-cutting machine tools

    CERN Document Server

    Koenigsberger, F

    1964-01-01

    Design Principles of Metal-Cutting Machine Tools discusses the fundamentals aspects of machine tool design. The book covers the design consideration of metal-cutting machine, such as static and dynamic stiffness, operational speeds, gearboxes, manual, and automatic control. The text first details the data calculation and the general requirements of the machine tool. Next, the book discusses the design principles, which include stiffness and rigidity of the separate constructional elements and their combined behavior under load, as well as electrical, mechanical, and hydraulic drives for the op

  9. MARs Tools for Interactive ANalysis (MARTIAN): Google Maps Tools for Visual Exploration of Geophysical Modeling on Mars

    Science.gov (United States)

    Dimitrova, L. L.; Haines, M.; Holt, W. E.; Schultz, R. A.; Richard, G.; Haines, A. J.

    2006-12-01

    Interactive maps of surface-breaking faults and stress models on Mars provide important tools to engage undergraduate students, educators, and scientists with current geological and geophysical research. We have developed a map based on the Google Maps API -- an Internet based tool combining DHTML and AJAX, -- which allows very large maps to be viewed over the World Wide Web. Typically, small portions of the maps are downloaded as needed, rather than the entire image at once. This set-up enables relatively fast access for users with low bandwidth. Furthermore, Google Maps provides an extensible interactive interface making it ideal for visualizing multiple data sets at the user's choice. The Google Maps API works primarily with data referenced to latitudes and longitudes, which is then mapped in Mercator projection only. We have developed utilities for general cylindrical coordinate systems by converting these coordinates into equivalent Mercator projection before including them on the map. The MARTIAN project is available at http://rock.geo.sunysb.edu/~holt/Mars/MARTIAN/. We begin with an introduction to the Martian surface using a topography model. Faults from several datasets are classified by type (extension vs. compression) and by time epoch. Deviatoric stresses due to gravitational potential energy differences, calculated from the topography and crustal thickness, can be overlain. Several quantitative measures for the fit of the stress field to the faults are also included. We provide introductory text and exercises spanning a range of topics: how are faults identified, what stress is and how it relates to faults, what gravitational potential energy is and how variations in it produce stress, how the models are created, and how these models can be evaluated and interpreted. The MARTIAN tool is used at Stony Brook University in GEO 310: Introduction to Geophysics, a class geared towards junior and senior geosciences majors. Although this project is in its

  10. CSP Design Model and Tool Support

    NARCIS (Netherlands)

    Volkerink, H.J.; Volkerink, H.J.; Hilderink, G.H.; Broenink, Johannes F.; Vervoort, Wiek; Welch, P.H.; Bakkers, André

    The CSP paradigm is known as a powerful concept for designing and analysing the architectural and behavioural parts of concurrent software. Although the theory of CSP is useful for mathematicians, the programming language occam has been derived from CSP that is useful for any engineering practice.

  11. Computing tools for accelerator design calculations

    International Nuclear Information System (INIS)

    Fischler, M.; Nash, T.

    1984-01-01

    This note is intended as a brief, summary guide for accelerator designers to the new generation of commercial and special processors that allow great increases in computing cost effectiveness. New thinking is required to take best advantage of these computing opportunities, in particular, when moving from analytical approaches to tracking simulations. In this paper, we outline the relevant considerations

  12. Design tool for offshore wind farm clusters

    DEFF Research Database (Denmark)

    Hasager, Charlotte Bay; Giebel, Gregor; Waldl, Igor

    2015-01-01

    . The software includes wind farm wake models, energy yield models, inter-array and long cable and grid component models, grid code compliance and ancillary services models. The common score for evaluation in order to compare different layouts is levelized cost of energy (LCoE). The integrated DTOC software...... Research Alliance (EERA) and a number of industrial partners. The approach has been to develop a robust, efficient, easy to use and flexible tool, which integrates software relevant for planning offshore wind farms and wind farm clusters and supports the user with a clear optimization work flow...... is developed within the project using open interface standards and is now available as the commercial software product Wind&Economy....

  13. Practicing universal design to actual hand tool design process.

    Science.gov (United States)

    Lin, Kai-Chieh; Wu, Chih-Fu

    2015-09-01

    UD evaluation principles are difficult to implement in product design. This study proposes a methodology for implementing UD in the design process through user participation. The original UD principles and user experience are used to develop the evaluation items. Difference of product types was considered. Factor analysis and Quantification theory type I were used to eliminate considered inappropriate evaluation items and to examine the relationship between evaluation items and product design factors. Product design specifications were established for verification. The results showed that converting user evaluation into crucial design verification factors by the generalized evaluation scale based on product attributes as well as the design factors applications in product design can improve users' UD evaluation. The design process of this study is expected to contribute to user-centered UD application. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  14. Mapping IMS Learning Design and Moodle. A first understanding

    NARCIS (Netherlands)

    Burgos, Daniel; Tattersall, Colin; Dougiamas, Martin; Vogten, Hubert; Koper, Rob

    2006-01-01

    Please, cite this publication as follows: Burgos, D., Tattersall, C., Dougiamas, M., Vogten, H., & Koper, E. J. R. (2006). Mapping IMS Learning Design and Moodle. A first understanding. Proceedings of Simposo Internacional de Informática Educativa (SIIE06), León, Spain: IEEE Technical Committee on

  15. Gear shift map design methodology for automotive transmissions

    NARCIS (Netherlands)

    Ngo, Viet Dac; Hofman, Theo; Steinbuch, Maarten; Serrarens, Alex

    In this paper, a design methodology is developed to condtruct the gear shift map for the automotive transmissions used in conventional and hybrid electric vehicles. The methodology utilizes an optimal gear shift strategy to derive the optimal gear shift patterns over a wide range of driving

  16. Designer Modeling for Personalized Game Content Creation Tools

    DEFF Research Database (Denmark)

    Liapis, Antonios; Yannakakis, Georgios N.; Togelius, Julian

    2013-01-01

    preferences, goals and processes from their interaction with a computer-aided design tool, and suggests methods and domains within game development where such a model can be applied. We describe how designer modeling could be integrated with current work on automated and mixed-initiative content creation......With the growing use of automated content creation and computer-aided design tools in game development, there is potential for enhancing the design process through personalized interactions between the software and the game developer. This paper proposes designer modeling for capturing the designer’s......, and envision future directions which focus on personalizing the processes to a designer’s particular wishes....

  17. Usability evaluation of cloud-based mapping tools for the display of very large datasets

    Science.gov (United States)

    Stotz, Nicole Marie

    The elasticity and on-demand nature of cloud services have made it easier to create web maps. Users only need access to a web browser and the Internet to utilize cloud based web maps, eliminating the need for specialized software. To encourage a wide variety of users, a map must be well designed; usability is a very important concept in designing a web map. Fusion Tables, a new product from Google, is one example of newer cloud-based distributed GIS services. It allows for easy spatial data manipulation and visualization, within the Google Maps framework. ESRI has also introduced a cloud based version of their software, called ArcGIS Online, built on Amazon's EC2 cloud. Utilizing a user-centered design framework, two prototype maps were created with data from the San Diego East County Economic Development Council. One map was built on Fusion Tables, and another on ESRI's ArcGIS Online. A usability analysis was conducted and used to compare both map prototypes in term so of design and functionality. Load tests were also ran, and performance metrics gathered on both map prototypes. The usability analysis was taken by 25 geography students, and consisted of time based tasks and questions on map design and functionality. Survey participants completed the time based tasks for the Fusion Tables map prototype quicker than those of the ArcGIS Online map prototype. While response was generally positive towards the design and functionality of both prototypes, overall the Fusion Tables map prototype was preferred. For the load tests, the data set was broken into 22 groups for a total of 44 tests. While the Fusion Tables map prototype performed more efficiently than the ArcGIS Online prototype, differences are almost unnoticeable. A SWOT analysis was conducted for each prototype. The results from this research point to the Fusion Tables map prototype. A redesign of this prototype would incorporate design suggestions from the usability survey, while some functionality would

  18. Map as a tool for independent learning in geography teaching

    Directory of Open Access Journals (Sweden)

    Živković Ljiljana

    2012-01-01

    Full Text Available There are different views on self-regulation in the learning process, how it has to be monitored, controlled, which are the circumstances and external factors that affect independent learning. Dominant are the opinions in which the self-regulation is treated as interaction of processes related to the personality, behavioural and contextual processes. Special attention has been given to motivational strategies and students’ desire to focus on goals. By enabling students to make decisions, set their own goals, make a choice, plan and organize activities, the development of self-learning and student autonomy is being encouraged. If students are given the opportunity of independent activities, effect of self-control in the process of learning and self-regulation becomes more pronounced. The paper will explain the factors that influence the process of self-learning that takes place in regular teaching with the help of map as the basic geographic media. [Projekat Ministarstva nauke Republike Srbije, br. 17008

  19. Improving design processes through structured reflection : a prototype software tool

    NARCIS (Netherlands)

    Reymen, I.M.M.J.; Melby, E.

    2001-01-01

    A prototype software tool facilitating the use of a design method supporting structured reflection on design processes is presented. The prototype, called Echo, has been developed to explore the benefits of using a software system to facilitate the use of the design method. Both the prototype

  20. On the Integration of Digital Design and Analysis Tools

    DEFF Research Database (Denmark)

    Klitgaard, Jens; Kirkegaard, Poul Henning

    2006-01-01

    The aim of this research is to look into integrated digital design and analysis tools in order to find out if it is suited for use by architects and designers or only by specialists and technicians - and if not, then to look at what can be done to make them more available to architects and design...

  1. A Gaussian decision-support tool for engineering design process

    NARCIS (Netherlands)

    Rajabali Nejad, Mohammadreza; Spitas, Christos

    2013-01-01

    Decision-making in design is of great importance, resulting in success or failure of a system (Liu et al., 2010; Roozenburg and Eekels, 1995; Spitas, 2011a). This paper describes a robust decision-support tool for engineering design process, which can be used throughout the design process in either

  2. Mindfully implementing simulation tools for supporting pragmatic design inquiries

    NARCIS (Netherlands)

    Hartmann, Timo; olde Scholtenhuis, Léon Luc; Zerjav, Vedran; Champlin, Carissa J

    2015-01-01

    Based upon a conceptualization of the engineering design process as pragmatic inquiry, this paper introduces a framework for supporting designers and design managers with a better understanding of the trade-offs required for a successful implementation of simulation tools. This framework contributes

  3. Designing decision support tools for targeted N-regulation

    DEFF Research Database (Denmark)

    Christensen, Andreas Aagaard; Piil, Kristoffer; Andersen, Peter Stubkjær

    2017-01-01

    data model for land use data – the dNmark landscape model. Based on input data which is corrected and edited by workshop participants, the tool estimates the effect of potential land use scenarios on nutrient emissions. The tool was tested in 5 scenario workshops in case areas in Denmark in 2016...... in Denmark to develop and improve a functioning decision support tool for landscape scale N-management. The aim of the study is to evaluate how a decision support tool can best be designed in order to enable landscape scale strategic N-management practices. Methods: A prototype GIS-tool for capturing......, storing, editing, displaying and modelling landscape scale farming practices and associated emission consequences was developed. The tool was designed to integrate locally held knowledge with national scale datasets in live scenario situations through the implementation of a flexible, uniform and editable...

  4. The Annotation, Mapping, Expression and Network (AMEN suite of tools for molecular systems biology

    Directory of Open Access Journals (Sweden)

    Primig Michael

    2008-02-01

    Full Text Available Abstract Background High-throughput genome biological experiments yield large and multifaceted datasets that require flexible and user-friendly analysis tools to facilitate their interpretation by life scientists. Many solutions currently exist, but they are often limited to specific steps in the complex process of data management and analysis and some require extensive informatics skills to be installed and run efficiently. Results We developed the Annotation, Mapping, Expression and Network (AMEN software as a stand-alone, unified suite of tools that enables biological and medical researchers with basic bioinformatics training to manage and explore genome annotation, chromosomal mapping, protein-protein interaction, expression profiling and proteomics data. The current version provides modules for (i uploading and pre-processing data from microarray expression profiling experiments, (ii detecting groups of significantly co-expressed genes, and (iii searching for enrichment of functional annotations within those groups. Moreover, the user interface is designed to simultaneously visualize several types of data such as protein-protein interaction networks in conjunction with expression profiles and cellular co-localization patterns. We have successfully applied the program to interpret expression profiling data from budding yeast, rodents and human. Conclusion AMEN is an innovative solution for molecular systems biological data analysis freely available under the GNU license. The program is available via a website at the Sourceforge portal which includes a user guide with concrete examples, links to external databases and helpful comments to implement additional functionalities. We emphasize that AMEN will continue to be developed and maintained by our laboratory because it has proven to be extremely useful for our genome biological research program.

  5. Improving Tools and Processes in Mechanical Design Collaboration

    Science.gov (United States)

    Briggs, Clark

    2009-01-01

    Cooperative product development projects in the aerospace and defense industry are held hostage to high cost and risk due to poor alignment of collaborative design tools and processes. This impasse can be broken if companies will jointly develop implementation approaches and practices in support of high value working arrangements. The current tools can be used to better advantage in many situations and there is reason for optimism that tool vendors will provide significant support.

  6. The future-essay as a design tool

    DEFF Research Database (Denmark)

    Thomsen, Bente Dahl; Kappel, Anne

    2007-01-01

    The aim of this paper is to present scenarios, photo-essays and future-essays as tools in communication, and as tools for clarifying the use of products in the future and the aesthetic qualities in the programme. In the design process, the programme is a description of the function, the condition...

  7. Computer Aided Design Tools for Extreme Environment Electronics, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — This project aims to provide Computer Aided Design (CAD) tools for radiation-tolerant, wide-temperature-range digital, analog, mixed-signal, and radio-frequency...

  8. Computer- Aided Design in Power Engineering Application of Software Tools

    CERN Document Server

    Stojkovic, Zlatan

    2012-01-01

    This textbooks demonstrates the application of software tools in solving a series of problems from the field of designing power system structures and systems. It contains four chapters: The first chapter leads the reader through all the phases necessary in the procedures of computer aided modeling and simulation. It guides through the complex problems presenting on the basis of eleven original examples. The second chapter presents  application of software tools in power system calculations of power systems equipment design. Several design example calculations are carried out using engineering standards like MATLAB, EMTP/ATP, Excel & Access, AutoCAD and Simulink. The third chapters focuses on the graphical documentation using a collection of software tools (AutoCAD, EPLAN, SIMARIS SIVACON, SIMARIS DESIGN) which enable the complete automation of the development of graphical documentation of a power systems. In the fourth chapter, the application of software tools in the project management in power systems ...

  9. Logical Framework Analysis (LFA): An Essential Tool for Designing ...

    African Journals Online (AJOL)

    Logical Framework Analysis (LFA): An Essential Tool for Designing Agricultural Project ... overview of the process and the structure of the Logical Framework Matrix or Logframe, derivable from it, ..... System Approach to Managing The Project.

  10. Design of a novel parallel reconfigurable machine tool

    CSIR Research Space (South Africa)

    Modungwa, D

    2008-06-01

    Full Text Available of meeting the demands for high mechanical dexterity adaptation as well as high stiffness necessary for mould and die re-conditioning. This paper presents, the design of parallel reconfigurable machine tool (PRMT) based on both application...

  11. Resources for Indoor Air Quality Design Tools for Schools

    Science.gov (United States)

    The information available here is presented as a tool to help school districts and facility planners design the next generation of learning environments so that the school facility will help schools in achieving their core mission of educating children.

  12. Enhanced avatar design using cognitive map-based simulation.

    Science.gov (United States)

    Lee, Kun Chang; Moon, Byung Suk

    2007-12-01

    With the advent of the Internet era and the maturation of electronic commerce, strategic avatar design has become an important way of keeping up with market changes and customer tastes. In this study, we propose a new approach to an adaptive avatar design that uses cognitive map (CM) as a what-if simulation vehicle. The main virtue of the new design is its ability to change specific avatar design features with objective consideration of the subsequent effects upon other design features, thereby enhancing user satisfaction. Statistical analyses of focus group interview results with a group of experts majoring in avatars and CM showed that our proposed approach could be used to effectively analyze avatar design in an adaptive and practical manner when the market situation is changing.

  13. The multi-copy simultaneous search methodology: a fundamental tool for structure-based drug design.

    Science.gov (United States)

    Schubert, Christian R; Stultz, Collin M

    2009-08-01

    Fragment-based ligand design approaches, such as the multi-copy simultaneous search (MCSS) methodology, have proven to be useful tools in the search for novel therapeutic compounds that bind pre-specified targets of known structure. MCSS offers a variety of advantages over more traditional high-throughput screening methods, and has been applied successfully to challenging targets. The methodology is quite general and can be used to construct functionality maps for proteins, DNA, and RNA. In this review, we describe the main aspects of the MCSS method and outline the general use of the methodology as a fundamental tool to guide the design of de novo lead compounds. We focus our discussion on the evaluation of MCSS results and the incorporation of protein flexibility into the methodology. In addition, we demonstrate on several specific examples how the information arising from the MCSS functionality maps has been successfully used to predict ligand binding to protein targets and RNA.

  14. GIS-based interactive tool to map the advent of world conquerors

    Science.gov (United States)

    Lakkaraju, Mahesh

    The objective of this thesis is to show the scale and extent of some of the greatest empires the world has ever seen. This is a hybrid project between the GIS based interactive tool and the web-based JavaScript tool. This approach lets the students learn effectively about the emperors themselves while understanding how long and far their empires spread. In the GIS based tool, a map is displayed with various points on it, and when a user clicks on one point, the relevant information of what happened at that particular place is displayed. Apart from this information, users can also select the interactive animation button and can walk through a set of battles in chronological order. As mentioned, this uses Java as the main programming language, and MOJO (Map Objects Java Objects) provided by ESRI. MOJO is very effective as its GIS related features can be included in the application itself. This app. is a simple tool and has been developed for university or high school level students. D3.js is an interactive animation and visualization platform built on the Javascript framework. Though HTML5, CSS3, Javascript and SVG animations can be used to derive custom animations, this tool can help bring out results with less effort and more ease of use. Hence, it has become the most sought after visualization tool for multiple applications. D3.js has provided a map-based visualization feature so that we can easily display text-based data in a map-based interface. To draw the map and the points on it, D3.js uses data rendered in TOPO JSON format. The latitudes and longitudes can be provided, which are interpolated into the Map svg. One of the main advantages of doing it this way is that more information is retained when we use a visual medium.

  15. DELTA.M: A tool for metropolitan designing systems

    OpenAIRE

    Tisma, A.

    2001-01-01

    This research deals with the development of a tool to enable designers, decision-makers and citizens to jointly shape the physical environments they inhabit, through interaction and communication via electronic networks. The designing of physical environment becomes the collective responsibility of all interested societal actors, who together form a "designing system". This research defines a 'designing system' as a temporary alliance of people responsible for decisions about the spatial deve...

  16. Developing a Conceptual Design Engineering Toolbox and its Tools

    Directory of Open Access Journals (Sweden)

    R. W. Vroom

    2004-01-01

    Full Text Available In order to develop a successful product, a design engineer needs to pay attention to all relevant aspects of that product. Many tools are available, software, books, websites, and commercial services. To unlock these potentially useful sources of knowledge, we are developing C-DET, a toolbox for conceptual design engineering. The idea of C-DET is that designers are supported by a system that provides them with a knowledge portal on one hand, and a system to store their current work on the other. The knowledge portal is to help the designer to find the most appropriate sites, experts, tools etc. at a short notice. Such a toolbox offers opportunities to incorporate extra functionalities to support the design engineering work. One of these functionalities could be to help the designer to reach a balanced comprehension in his work. Furthermore C-DET enables researchers in the area of design engineering and design engineers themselves to find each other or their work earlier and more easily. Newly developed design tools that can be used by design engineers but have not yet been developed up to a commercial level could be linked to by C-DET. In this way these tools can be evaluated in an early stage by design engineers who would like to use them. This paper describes the first prototypes of C-DET, an example of the development of a design tool that enables designers to forecast the use process and an example of the future functionalities of C-DET such as balanced comprehension.

  17. Design Space Exploration and Optimization Using Modern Ship Design Tools

    Science.gov (United States)

    2014-06-01

    Model Editor will open again. Aviation Facilities Indicator should be set to MINOR AVN since we are required to have two helicopters in our design. The...other options are NONE and MAJOR AVN . The former should be selected if no aviation facilities are required and the latter should be chosen only for

  18. A Modeling Tool for Household Biogas Burner Flame Port Design

    Science.gov (United States)

    Decker, Thomas J.

    Anaerobic digestion is a well-known and potentially beneficial process for rural communities in emerging markets, providing the opportunity to generate usable gaseous fuel from agricultural waste. With recent developments in low-cost digestion technology, communities across the world are gaining affordable access to the benefits of anaerobic digestion derived biogas. For example, biogas can displace conventional cooking fuels such as biomass (wood, charcoal, dung) and Liquefied Petroleum Gas (LPG), effectively reducing harmful emissions and fuel cost respectively. To support the ongoing scaling effort of biogas in rural communities, this study has developed and tested a design tool aimed at optimizing flame port geometry for household biogas-fired burners. The tool consists of a multi-component simulation that incorporates three-dimensional CAD designs with simulated chemical kinetics and computational fluid dynamics. An array of circular and rectangular port designs was developed for a widely available biogas stove (called the Lotus) as part of this study. These port designs were created through guidance from previous studies found in the literature. The three highest performing designs identified by the tool were manufactured and tested experimentally to validate tool output and to compare against the original port geometry. The experimental results aligned with the tool's prediction for the three chosen designs. Each design demonstrated improved thermal efficiency relative to the original, with one configuration of circular ports exhibiting superior performance. The results of the study indicated that designing for a targeted range of port hydraulic diameter, velocity and mixture density in the tool is a relevant way to improve the thermal efficiency of a biogas burner. Conversely, the emissions predictions made by the tool were found to be unreliable and incongruent with laboratory experiments.

  19. Thermal Comfort-CFD maps for Architectural Interior Design

    DEFF Research Database (Denmark)

    Naboni, Emanuele; Lee, Daniel Sang-Hoon; Fabbri, Kristian

    2017-01-01

    opportunities of movable interior partitions (operated by the users) could be estimated, providing a new layer of information to the designer. The applicability of the thermal maps within an architectural design process is discussed adopting standard energy simulation comfort outputs as a reference......Within the context of nearly Zero-Energy Buildings, it is debated that the energy-centred notion of design, proposed by regulatory frames, needs to be combined with a further focus toward users’ comfort and delight. Accordingly, the underlying theory of the research is that designers should take...... responsibility for understanding the heat flows through the building parts and its spaces. A design, which is sensible to the micro-thermal conditions coexisting in a space, allows the inhabitants to control the building to their needs and desires: for instance, maximising the benefits of heat gain from the sun...

  20. Report on design rules of μ-tools for hybrid tooling

    DEFF Research Database (Denmark)

    Esmoris, Jose Ignacio; Azcarate, S.; Tosello, Guido

    2011-01-01

    -effectively, especially for micro injection moulding. This particular deliverable has the objective to present the design rules for high performance μ-tools and inserts manufacture based on the new standard manufacturing process chains established during the WP 2.2 work. In particular, the achievable features, surfaces......Tooling is one of the critical stages of the process chain for polymer micro products manufacture and in particular for the COTECH process chain. Therefore, within the scope of SP2 “Tooling”, the WP 2.2 “New tool-making solutions for μ-IM and HE” is designed to investigate, develop and standardize...

  1. The service blueprint as a tool for designing innovative pharmaceutical services.

    Science.gov (United States)

    Holdford, D A; Kennedy, D T

    1999-01-01

    To describe service blueprints, discuss their need and design, and provide examples of their use in advancing pharmaceutical care. Service blueprints are pictures or maps of service processes that permit the people involved in designing, providing, managing, and using the service to better understand them and deal with them objectively. A service blueprint simultaneously depicts the service process and the roles of consumers, service providers, and supporting services. Service blueprints can be useful in pharmacy because many of the obstacles to pharmaceutical care are a result of insufficient planning by service designers and/or poor communication between those designing services and those implementing them. One consequence of this poor design and communication is that many consumers and third party payers are uninformed about pharmacist roles. Service blueprints can be used by pharmacists to promote the value of pharmaceutical care to consumers and other decision makers. They can also assist in designing better pharmaceutical services. Blueprints are designed by identifying and mapping a process from the consumer's point of view, mapping employee actions and support activities, and adding visible evidence of service at each consumer action step. Key components of service blueprints are consumer actions, "onstage" and "backstage" employee actions, and support processes. Blueprints can help pharmacy managers identify and correct problems with the service process, provide pharmacy employees an opportunity to offer feedback in the planning stages of services, and demonstrate the value of pharmaceutical services to consumers. Service blueprints can be a valuable tool for designing, implementing, and evaluating pharmacy services.

  2. Hygrothermal Simulation: A Tool for Building Envelope Design Analysis

    Science.gov (United States)

    Samuel V. Glass; Anton TenWolde; Samuel L. Zelinka

    2013-01-01

    Is it possible to gauge the risk of moisture problems while designing the building envelope? This article provides a brief introduction to computer-based hygrothermal (heat and moisture) simulation, shows how simulation can be useful as a design tool, and points out a number of im-portant considerations regarding model inputs and limita-tions. Hygrothermal simulation...

  3. Ecological Interface Design of a Tactical Airborne Separation Assistance Tool

    NARCIS (Netherlands)

    Van Dam, S.; Mulder, M.; Van Paassen, M.M.

    2008-01-01

    In a free-flight airspace environment, pilots have more freedom to choose user-preferred trajectories. An onboard pilot support system is needed that exploits travel freedom while maintaining spatial separation with other traffic. Ecological interface design is used to design an interface tool that

  4. A tangible design tool for sketching materials in products

    NARCIS (Netherlands)

    Saakes, D.P.; Stappers, P.J.

    2009-01-01

    Industrial designers make sketches and physical models to start and develop ideas and concept designs. Such representations have advantages that they support fast, intuitive, rich, sensory exploration of solutions. Although existing tools and techniques provide adequate support where the shape of

  5. Topics in expert system design methodologies and tools

    CERN Document Server

    Tasso, C

    1989-01-01

    Expert Systems are so far the most promising achievement of artificial intelligence research. Decision making, planning, design, control, supervision and diagnosis are areas where they are showing great potential. However, the establishment of expert system technology and its actual industrial impact are still limited by the lack of a sound, general and reliable design and construction methodology.This book has a dual purpose: to offer concrete guidelines and tools to the designers of expert systems, and to promote basic and applied research on methodologies and tools. It is a coordinated coll

  6. Designing the user experience of game development tools

    CERN Document Server

    Lightbown, David

    2015-01-01

    The Big Green Button My Story Who Should Read this Book? Companion Website and Twitter Account Before we BeginWelcome to Designing the User Experience of Game Development ToolsWhat Will We Learn in This Chapter?What Is This Book About?Defining User ExperienceThe Value of Improving the User Experience of Our ToolsParallels Between User Experience and Game DesignHow Do People Benefit From an Improved User Experience?Finding the Right BalanceWrapping UpThe User-Centered Design ProcessWhat Will We

  7. Synchronization of generalized Henon map via backstepping design

    International Nuclear Information System (INIS)

    Huang Lilian; Wang Mao; Feng Rupeng

    2005-01-01

    This paper proposes a backstepping method to resolve the synchronization of discrete-time chaotic systems. The proposed scheme offers systematic design method for the synchronization of a class of discrete-time hyper-chaotic systems, which implies much complicated high-order chaotic systems can be used to improve the security in chaos communications. A well-known chaotic systems: generalized Henon map is considered as illustrative example to demonstrate the general applicability of backstepping design. Numerical simulations verify the effectiveness of the approach

  8. Using a concept map as a tool for strategic planning: The Healthy Brain Initiative.

    Science.gov (United States)

    Anderson, Lynda A; Day, Kristine L; Vandenberg, Anna E

    2011-09-01

    Concept mapping is a tool to assist in strategic planning that allows planners to work through a sequence of phases to produce a conceptual framework. Although several studies describe how concept mapping is applied to various public health problems, the flexibility of the methods used in each phase of the process is often overlooked. If practitioners were more aware of the flexibility, more public health endeavors could benefit from using concept mapping as a tool for strategic planning. The objective of this article is to describe how the 6 concept-mapping phases originally outlined by William Trochim guided our strategic planning process and how we adjusted the specific methods in the first 2 phases to meet the specialized needs and requirements to create The Healthy Brain Initiative: A National Public Health Road Map to Maintaining Cognitive Health. In the first stage (phases 1 and 2 of concept mapping), we formed a steering committee, convened 4 work groups over a period of 3 months, and generated an initial set of 42 action items grounded in science. In the second stage (phases 3 and 4), we engaged stakeholders in sorting and rating the action items and constructed a series of concept maps. In the third and final stage (phases 5 and 6), we examined and refined the action items and generated a final concept map consisting of 44 action items. We then selected the top 10 action items, and in 2007, we published The Healthy Brain Initiative: A National Public Health Road Map to Maintaining Cognitive Health, which represents the strategic plan for The Healthy Brain Initiative.

  9. 3D Design Tools for Vacuum Electron Devices

    International Nuclear Information System (INIS)

    Levush, Baruch

    2003-01-01

    A reduction of development costs will have a significant impact on the total cost of the vacuum electron devices. Experimental testing cycles can be reduced or eliminated through the use of simulation-based design methodology, thereby reducing the time and cost of development. Moreover, by use of modern optimization tools for automating the process of seeking specific solution parameters and for studying dependencies of performance on parameters, new performance capabilities can be achieved, without resorting to expensive cycles of hardware fabrication and testing. Simulation-based-design will also provide the basis for sensitivity studies for determining the manufacturing tolerances associated with a particular design. Since material properties can have a critical effect on the performance of the vacuum electron devices, the design tools require precise knowledge of material characteristics, such as dielectric properties of the support rods, loss profile etc. Sensitivity studies must therefore include the effects of materials properties variation on device performance. This will provide insight for choosing the proper technological processes in order to achieve these tolerances, which is of great importance for achieving cost reduction. A successful design methodology depends on the development of accurate and efficient design tools with predictive capabilities. These design tools must be based on realistic models capable of high fidelity representation of geometry and materials, they must have optimization capabilities, and they must be easy to use

  10. PepMapper: a collaborative web tool for mapping epitopes from affinity-selected peptides.

    Directory of Open Access Journals (Sweden)

    Wenhan Chen

    Full Text Available Epitope mapping from affinity-selected peptides has become popular in epitope prediction, and correspondingly many Web-based tools have been developed in recent years. However, the performance of these tools varies in different circumstances. To address this problem, we employed an ensemble approach to incorporate two popular Web tools, MimoPro and Pep-3D-Search, together for taking advantages offered by both methods so as to give users more options for their specific purposes of epitope-peptide mapping. The combined operation of Union finds as many associated peptides as possible from both methods, which increases sensitivity in finding potential epitopic regions on a given antigen surface. The combined operation of Intersection achieves to some extent the mutual verification by the two methods and hence increases the likelihood of locating the genuine epitopic region on a given antigen in relation to the interacting peptides. The Consistency between Intersection and Union is an indirect sufficient condition to assess the likelihood of successful peptide-epitope mapping. On average from 27 tests, the combined operations of PepMapper outperformed either MimoPro or Pep-3D-Search alone. Therefore, PepMapper is another multipurpose mapping tool for epitope prediction from affinity-selected peptides. The Web server can be freely accessed at: http://informatics.nenu.edu.cn/PepMapper/

  11. GeneRecon—A coalescent based tool for fine-scale association mapping

    DEFF Research Database (Denmark)

    Mailund, Thomas; Schierup, Mikkel Heide; Pedersen, Christian Nørgaard Storm

    2006-01-01

    GeneRecon is a tool for fine-scale association mapping using a coalescence model. GeneRecon takes as input case-control data from phased or unphased SNP and micro-satellite genotypes. The posterior distribution of disease locus position is obtained by Metropolis Hastings sampling in the state space...

  12. A Revised Interface for the ARL Topodef Mobility Design Tool

    Science.gov (United States)

    2012-04-01

    designed paths as though moving down a conveyor belt . Giving paths an existence independent of the nodes that travel along them not only makes their...A Revised Interface for the ARL Topodef Mobility Design Tool by Andrew J. Toth and Michael Christensen ARL-TR-5980 April 2012...Disclaimers The findings in this report are not to be construed as an official Department of the Army position unless so designated by other

  13. Tool-based requirement traceability between requirement and design artifacts

    CERN Document Server

    Turban, Bernhard

    2013-01-01

    Processes for developing safety-critical systems impose special demands on ensuring requirements traceability. Achieving valuable traceability information, however, is especially difficult concerning the transition from requirements to design. Bernhard Turban analyzes systems and software engineering theories cross-cutting the issue (embedded systems development, systems engineering, software engineering, requirements engineering and management, design theory and processes for safety-critical systems). As a solution, the author proposes a new tool approach to support designers in their thinkin

  14. A review of electronic engineering design free software tools

    OpenAIRE

    Medrano Sánchez, Carlos; Plaza García, Inmaculada; Castro Gil, Manuel Alonso; García Sevilla, Francisco; Martínez Calero, J.D.; Pou Félix, Josep; Corbalán Fuertes, Montserrat

    2010-01-01

    In this paper, we review electronic design free software tools. We have searched open source programs that help with several tasks of the electronic design flow: analog and digital simulation, schematic capture, printed circuit board design and hardware description language compilation and simulation. Using some rapid criteria for verifying their availability, we have selected some of them which are worth working with. This work intends to perform a deeper analysis of fre...

  15. Computational Tools and Algorithms for Designing Customized Synthetic Genes

    Directory of Open Access Journals (Sweden)

    Nathan eGould

    2014-10-01

    Full Text Available Advances in DNA synthesis have enabled the construction of artificial genes, gene circuits, and genomes of bacterial scale. Freedom in de-novo design of synthetic constructs provides significant power in studying the impact of mutations in sequence features, and verifying hypotheses on the functional information that is encoded in nucleic and amino acids. To aid this goal, a large number of software tools of variable sophistication have been implemented, enabling the design of synthetic genes for sequence optimization based on rationally defined properties. The first generation of tools dealt predominantly with singular objectives such as codon usage optimization and unique restriction site incorporation. Recent years have seen the emergence of sequence design tools that aim to evolve sequences toward combinations of objectives. The design of optimal protein coding sequences adhering to multiple objectives is computationally hard, and most tools rely on heuristics to sample the vast sequence design space. In this review we study some of the algorithmic issues behind gene optimization and the approaches that different tools have adopted to redesign genes and optimize desired coding features. We utilize test cases to demonstrate the efficiency of each approach, as well as identify their strengths and limitations.

  16. Computational Tools and Algorithms for Designing Customized Synthetic Genes

    Energy Technology Data Exchange (ETDEWEB)

    Gould, Nathan [Department of Computer Science, The College of New Jersey, Ewing, NJ (United States); Hendy, Oliver [Department of Biology, The College of New Jersey, Ewing, NJ (United States); Papamichail, Dimitris, E-mail: papamicd@tcnj.edu [Department of Computer Science, The College of New Jersey, Ewing, NJ (United States)

    2014-10-06

    Advances in DNA synthesis have enabled the construction of artificial genes, gene circuits, and genomes of bacterial scale. Freedom in de novo design of synthetic constructs provides significant power in studying the impact of mutations in sequence features, and verifying hypotheses on the functional information that is encoded in nucleic and amino acids. To aid this goal, a large number of software tools of variable sophistication have been implemented, enabling the design of synthetic genes for sequence optimization based on rationally defined properties. The first generation of tools dealt predominantly with singular objectives such as codon usage optimization and unique restriction site incorporation. Recent years have seen the emergence of sequence design tools that aim to evolve sequences toward combinations of objectives. The design of optimal protein-coding sequences adhering to multiple objectives is computationally hard, and most tools rely on heuristics to sample the vast sequence design space. In this review, we study some of the algorithmic issues behind gene optimization and the approaches that different tools have adopted to redesign genes and optimize desired coding features. We utilize test cases to demonstrate the efficiency of each approach, as well as identify their strengths and limitations.

  17. Computational Tools and Algorithms for Designing Customized Synthetic Genes

    International Nuclear Information System (INIS)

    Gould, Nathan; Hendy, Oliver; Papamichail, Dimitris

    2014-01-01

    Advances in DNA synthesis have enabled the construction of artificial genes, gene circuits, and genomes of bacterial scale. Freedom in de novo design of synthetic constructs provides significant power in studying the impact of mutations in sequence features, and verifying hypotheses on the functional information that is encoded in nucleic and amino acids. To aid this goal, a large number of software tools of variable sophistication have been implemented, enabling the design of synthetic genes for sequence optimization based on rationally defined properties. The first generation of tools dealt predominantly with singular objectives such as codon usage optimization and unique restriction site incorporation. Recent years have seen the emergence of sequence design tools that aim to evolve sequences toward combinations of objectives. The design of optimal protein-coding sequences adhering to multiple objectives is computationally hard, and most tools rely on heuristics to sample the vast sequence design space. In this review, we study some of the algorithmic issues behind gene optimization and the approaches that different tools have adopted to redesign genes and optimize desired coding features. We utilize test cases to demonstrate the efficiency of each approach, as well as identify their strengths and limitations.

  18. Analysis of functionality free CASE-tools databases design

    Directory of Open Access Journals (Sweden)

    A. V. Gavrilov

    2016-01-01

    Full Text Available The introduction in the educational process of database design CASEtechnologies requires the institution of significant costs for the purchase of software. A possible solution could be the use of free software peers. At the same time this kind of substitution should be based on even-com representation of the functional characteristics and features of operation of these programs. The purpose of the article – a review of the free and non-profi t CASE-tools database design, as well as their classifi cation on the basis of the analysis functionality. When writing this article were used materials from the offi cial websites of the tool developers. Evaluation of the functional characteristics of CASEtools for database design made exclusively empirically with the direct work with software products. Analysis functionality of tools allow you to distinguish the two categories CASE-tools database design. The first category includes systems with a basic set of features and tools. The most important basic functions of these systems are: management connections to database servers, visual tools to create and modify database objects (tables, views, triggers, procedures, the ability to enter and edit data in table mode, user and privilege management tools, editor SQL-code, means export/import data. CASE-system related to the first category can be used to design and develop simple databases, data management, as well as a means of administration server database. A distinctive feature of the second category of CASE-tools for database design (full-featured systems is the presence of visual designer, allowing to carry out the construction of the database model and automatic creation of the database on the server based on this model. CASE-system related to this categories can be used for the design and development of databases of any structural complexity, as well as a database server administration tool. The article concluded that the

  19. Requirements and design concept for a facility mapping system

    International Nuclear Information System (INIS)

    Barry, R.E.; Burks, B.L.; Little, C.Q.

    1995-01-01

    The Department of Energy (DOE) has for some time been considering the Decontamination and Dismantlement (D ampersand D) of facilities which are no longer in use, but which are highly contaminated with radioactive wastes. One of the holdups in performing the D ampersand D task is the accumulation of accurate facility characterizations that can enable a safe and orderly cleanup process. According to the Technical Strategic Plan for the Decontamination and Decommissioning Integrated Demonstration, open-quotes the cost of characterization using current baseline technologies for approximately 100 acres of gaseous diffusion plant at Oak Ridge alone is, for the most part incalculableclose quotes. Automated, robotic techniques will be necessary for initial characterization and continued surveillance of these types of sites. Robotic systems are being designed and constructed to accomplish these tasks. This paper describes requirements and design concepts for a system to accurately map a facility contaminated with hazardous wastes. Some of the technologies involved in the Facility Mapping System are: remote characterization with teleoperated, sensor-based systems, fusion of data sets from multiple characterization systems, and object recognition from 3D data models. This Facility Mapping System is being assembled by Oak Ridge National Laboratory for the DOE Office of Technology Development Robotics Technology Development Program

  20. IT-tool Concept for Design and Intelligent Motion Control

    DEFF Research Database (Denmark)

    Conrad, Finn; Hansen, Poul Erik; Sørensen, Torben

    2000-01-01

    The paper presents results obtained from a Danish mechatronic research program focusing on intelligent motion control as well as results from the Esprit project SWING on IT-tools for rapid prototyping of fluid power components and systems. A mechatronic test facility with digital controllers for ....... Furthermore, a developed IT-tool concept for controller and system design utilising the ISO 10303 STEP Standard is proposed....

  1. A Simulation Tool for the Conceptual Design of Thermonuclear Pulsors

    International Nuclear Information System (INIS)

    Ramos, R.; Gonzalez, J.; Clausse, A.

    2003-01-01

    We worked with an effective model that calculates the neutron production of Plasma Focus devices.From experimental data we obtained different fitting functions for the model lumped parameters.By this way, we obtained a simple tool for neutron yield calculation.This tool is very useful at a conceptual design stage, because it can predict easily if a given PF device would be suitable for a certain application

  2. Managing design excellence tools during the development of new orthopaedic implants.

    Science.gov (United States)

    Défossez, Henri J P; Serhan, Hassan

    2013-11-01

    Design excellence (DEX) tools have been widely used for years in some industries for their potential to facilitate new product development. The medical sector, targeted by cost pressures, has therefore started adopting them. Numerous tools are available; however only appropriate deployment during the new product development stages can optimize the overall process. The primary study objectives were to describe generic tools and illustrate their implementation and management during the development of new orthopaedic implants, and compile a reference package. Secondary objectives were to present the DEX tool investment costs and savings, since the method can require significant resources for which companies must carefully plan. The publicly available DEX method "Define Measure Analyze Design Verify Validate" was adopted and implemented during the development of a new spinal implant. Several tools proved most successful at developing the correct product, addressing clinical needs, and increasing market penetration potential, while reducing design iterations and manufacturing validations. Cost analysis and Pugh Matrix coupled with multi generation planning enabled developing a strong rationale to activate the project, set the vision and goals. improved risk management and product map established a robust technical verification-validation program. Design of experiments and process quantification facilitated design for manufacturing of critical features, as early as the concept phase. Biomechanical testing with analysis of variance provided a validation model with a recognized statistical performance baseline. Within those tools, only certain ones required minimum resources (i.e., business case, multi generational plan, project value proposition, Pugh Matrix, critical To quality process validation techniques), while others required significant investments (i.e., voice of customer, product usage map, improved risk management, design of experiments, biomechanical testing

  3. Cost Based Value Stream Mapping as a Sustainable Construction Tool for Underground Pipeline Construction Projects

    Directory of Open Access Journals (Sweden)

    Murat Gunduz

    2017-11-01

    Full Text Available This paper deals with application of Value Stream Mapping (VSM as a sustainable construction tool on a real construction project of installation of underground pipelines. VSM was adapted to reduce the high percentage of non-value-added activities and time wastes during each construction stage and the paper searched for an effective way to consider the cost for studied construction of underground pipeline. This paper is unique in its way that it adopts cost implementation of VSM to improve the productivity in underground pipeline projects. The data was observed and collected from site during construction, indicating the cycle time, value added and non-value added of each construction stage. The current state was built based on these details. This was an eye-opening exercise and a process management tool as a trigger for improvement. After the current state assessment, a future state is attempted by Value Stream Mapping tool balancing the resources using a Line of Balance (LOB technique. Moreover, a sustainable cost estimation model was developed during current state and future state to calculate the cost of underground pipeline construction. The result shows a cost reduction of 20.8% between current and future states. This reflects the importance of the cost based Value Stream Mapping in construction as a sustainable measurement tool. This new tool could be utilized in construction industry to add the sustainability and effective cost management.

  4. Visualization tool for human-machine interface designers

    Science.gov (United States)

    Prevost, Michael P.; Banda, Carolyn P.

    1991-06-01

    As modern human-machine systems continue to grow in capabilities and complexity, system operators are faced with integrating and managing increased quantities of information. Since many information components are highly related to each other, optimizing the spatial and temporal aspects of presenting information to the operator has become a formidable task for the human-machine interface (HMI) designer. The authors describe a tool in an early stage of development, the Information Source Layout Editor (ISLE). This tool is to be used for information presentation design and analysis; it uses human factors guidelines to assist the HMI designer in the spatial layout of the information required by machine operators to perform their tasks effectively. These human factors guidelines address such areas as the functional and physical relatedness of information sources. By representing these relationships with metaphors such as spring tension, attractors, and repellers, the tool can help designers visualize the complex constraint space and interacting effects of moving displays to various alternate locations. The tool contains techniques for visualizing the relative 'goodness' of a configuration, as well as mechanisms such as optimization vectors to provide guidance toward a more optimal design. Also available is a rule-based design checker to determine compliance with selected human factors guidelines.

  5. Nonlinear Shaping Architecture Designed with Using Evolutionary Structural Optimization Tools

    Science.gov (United States)

    Januszkiewicz, Krystyna; Banachowicz, Marta

    2017-10-01

    The paper explores the possibilities of using Structural Optimization Tools (ESO) digital tools in an integrated structural and architectural design in response to the current needs geared towards sustainability, combining ecological and economic efficiency. The first part of the paper defines the Evolutionary Structural Optimization tools, which were developed specifically for engineering purposes using finite element analysis as a framework. The development of ESO has led to several incarnations, which are all briefly discussed (Additive ESO, Bi-directional ESO, Extended ESO). The second part presents result of using these tools in structural and architectural design. Actual building projects which involve optimization as a part of the original design process will be presented (Crematorium in Kakamigahara Gifu, Japan, 2006 SANAA“s Learning Centre, EPFL in Lausanne, Switzerland 2008 among others). The conclusion emphasizes that the structural engineering and architectural design mean directing attention to the solutions which are used by Nature, designing works optimally shaped and forming their own environments. Architectural forms never constitute the optimum shape derived through a form-finding process driven only by structural optimization, but rather embody and integrate a multitude of parameters. It might be assumed that there is a similarity between these processes in nature and the presented design methods. Contemporary digital methods make the simulation of such processes possible, and thus enable us to refer back to the empirical methods of previous generations.

  6. The Development of a Tool for Sustainable Building Design:

    DEFF Research Database (Denmark)

    Tine Ring Hansen, Hanne; Knudstrup, Mary-Ann

    2009-01-01

    for sustainable buildings, as well as, an analysis of the relationship between the different approaches (e.g. low-energy, environmental, green building, solar architecture, bio-climatic architecture etc.) to sustainable building design and these indicators. The paper furthermore discusses how sustainable......The understanding of sustainable building has changed over time along with the architectural interpretation of sustainability. The paper presents the results of a comparative analysis of the indicators found in different internationally acclaimed and Danish certification schemes and standards...... architecture will gain more focus in the coming years, thus, establishing the need for the development of a new tool and methodology, The paper furthermore describes the background and considerations involved in the development of a design support tool for sustainable building design. A tool which considers...

  7. Internet MEMS design tools based on component technology

    Science.gov (United States)

    Brueck, Rainer; Schumer, Christian

    1999-03-01

    The micro electromechanical systems (MEMS) industry in Europe is characterized by small and medium sized enterprises specialized on products to solve problems in specific domains like medicine, automotive sensor technology, etc. In this field of business the technology driven design approach known from micro electronics is not appropriate. Instead each design problem aims at its own, specific technology to be used for the solution. The variety of technologies at hand, like Si-surface, Si-bulk, LIGA, laser, precision engineering requires a huge set of different design tools to be available. No single SME can afford to hold licenses for all these tools. This calls for a new and flexible way of designing, implementing and distributing design software. The Internet provides a flexible manner of offering software access along with methodologies of flexible licensing e.g. on a pay-per-use basis. New communication technologies like ADSL, TV cable of satellites as carriers promise to offer a bandwidth sufficient even for interactive tools with graphical interfaces in the near future. INTERLIDO is an experimental tool suite for process specification and layout verification for lithography based MEMS technologies to be accessed via the Internet. The first version provides a Java implementation even including a graphical editor for process specification. Currently, a new version is brought into operation that is based on JavaBeans component technology. JavaBeans offers the possibility to realize independent interactive design assistants, like a design rule checking assistants, a process consistency checking assistants, a technology definition assistants, a graphical editor assistants, etc. that may reside distributed over the Internet, communicating via Internet protocols. Each potential user thus is able to configure his own dedicated version of a design tool set dedicated to the requirements of the current problem to be solved.

  8. A Tool Supporting Collaborative Data Analytics Workflow Design and Management

    Science.gov (United States)

    Zhang, J.; Bao, Q.; Lee, T. J.

    2016-12-01

    Collaborative experiment design could significantly enhance the sharing and adoption of the data analytics algorithms and models emerged in Earth science. Existing data-oriented workflow tools, however, are not suitable to support collaborative design of such a workflow, to name a few, to support real-time co-design; to track how a workflow evolves over time based on changing designs contributed by multiple Earth scientists; and to capture and retrieve collaboration knowledge on workflow design (discussions that lead to a design). To address the aforementioned challenges, we have designed and developed a technique supporting collaborative data-oriented workflow composition and management, as a key component toward supporting big data collaboration through the Internet. Reproducibility and scalability are two major targets demanding fundamental infrastructural support. One outcome of the project os a software tool, supporting an elastic number of groups of Earth scientists to collaboratively design and compose data analytics workflows through the Internet. Instead of recreating the wheel, we have extended an existing workflow tool VisTrails into an online collaborative environment as a proof of concept.

  9. Design of automation tools for management of descent traffic

    Science.gov (United States)

    Erzberger, Heinz; Nedell, William

    1988-01-01

    The design of an automated air traffic control system based on a hierarchy of advisory tools for controllers is described. Compatibility of the tools with the human controller, a key objective of the design, is achieved by a judicious selection of tasks to be automated and careful attention to the design of the controller system interface. The design comprises three interconnected subsystems referred to as the Traffic Management Advisor, the Descent Advisor, and the Final Approach Spacing Tool. Each of these subsystems provides a collection of tools for specific controller positions and tasks. This paper focuses primarily on the Descent Advisor which provides automation tools for managing descent traffic. The algorithms, automation modes, and graphical interfaces incorporated in the design are described. Information generated by the Descent Advisor tools is integrated into a plan view traffic display consisting of a high-resolution color monitor. Estimated arrival times of aircraft are presented graphically on a time line, which is also used interactively in combination with a mouse input device to select and schedule arrival times. Other graphical markers indicate the location of the fuel-optimum top-of-descent point and the predicted separation distances of aircraft at a designated time-control point. Computer generated advisories provide speed and descent clearances which the controller can issue to aircraft to help them arrive at the feeder gate at the scheduled times or with specified separation distances. Two types of horizontal guidance modes, selectable by the controller, provide markers for managing the horizontal flightpaths of aircraft under various conditions. The entire system consisting of descent advisor algorithm, a library of aircraft performance models, national airspace system data bases, and interactive display software has been implemented on a workstation made by Sun Microsystems, Inc. It is planned to use this configuration in operational

  10. Modified Ishikawa Diagram as a Tool for Knowledge-Mapping of Agronomic Practices

    Directory of Open Access Journals (Sweden)

    Petr Kedaj

    2015-12-01

    Full Text Available This article describes a novel method of graphical representation of agronomic practices in crop production. The influence of initial factors, the need to follow a chronology of individual operations and the possibility of using this information for creating a knowledge base are all considered in the method designed. Consequently, alternate methods of knowledge mapping are described: Mind maps, conceptual maps, cognitive maps as well as Ishikawa diagram, which is the main inspiration for our method. These established methods of knowledge mapping have been confronted with the method proposed by our research team using a qualitative survey. Results of this study suggest a high potential of use of our method in agronomy. At the end of this article, we propose additional steps for possible improvements in usability of the method described.

  11. Enhanced STEM Learning with the GeoMapApp Data Exploration Tool

    Science.gov (United States)

    Goodwillie, A. M.

    2014-12-01

    GeoMapApp (http://www.geomapapp.org), is a free, map-based data discovery and visualisation tool developed with NSF funding at Lamont-Doherty Earth Observatory. GeoMapApp provides casual and specialist users alike with access to hundreds of built-in geoscience data sets covering geology, geophysics, geochemistry, oceanography, climatology, cryospherics, and the environment. Users can also import their own data tables, spreadsheets, shapefiles, grids and images. Simple manipulation and analysis tools combined with layering capabilities and engaging visualisations provide a powerful platform with which to explore and interrogate geoscience data in its proper geospatial context thus helping users to more easily gain insight into the meaning of the data. A global elevation base map covering the oceans as well as continents forms the backbone of GeoMapApp. The multi-resolution base map is updated regularly and includes data sources ranging from Space Shuttle elevation data for land areas to ultra-high-resolution surveys of coral reefs and seafloor hydrothermal vent fields. Examples of built-in data sets that can be layered over the elevation model include interactive earthquake and volcano data, plate tectonic velocities, hurricane tracks, land and ocean temperature, water column properties, age of the ocean floor, and deep submersible bottom photos. A versatile profiling tool provides instant access to data cross-sections. Contouring and 3-D views are also offered - the attached image shows a 3-D view of East Africa's Ngorongoro Crater as an example. Tabular data - both imported and built-in - can be displayed in a variety of ways and a lasso tool enables users to quickly select data points directly from the map. A range of STEM-based education material based upon GeoMapApp is already available, including a number of self-contained modules for school- and college-level students (http://www.geomapapp.org/education/contributed_material.html). More learning modules are

  12. Tool design and materials for electro sinter forging (ESF)

    DEFF Research Database (Denmark)

    Cannella, Emanuele; Nielsen, Chris Valentin

    ) process, the main requirement is the electrical current passing through the electrical conducting powder. To obtain this, a closed-die setup with electrical insulating properties was used. Furthermore, the alignment between the compacting punch and die needed to be ensured by pre-aligning or alternatively...... by using an alignment system. The present work is focused on the designing phase of a tool for the electro sinter forging of a disc, made from titanium powder. By applying a pre-alignment system, the setup resulted suitable for this application. A tool design for sintering rings is also showed....

  13. Design Tool for Direct Drive Wind Turbine Generators

    DEFF Research Database (Denmark)

    Leban, Krisztina Monika

    . A comparison of the selected machine types in view of up-scaling to 20 [MW] was performed. As an example fitness criterion, the use of active materials for the generators was considered. Based on this, suggestions for 20 [MW] generators were made. The results are discussed and future work, directions......The current work offers a comparison of the proposed machine geometries for 6 [MW] direct drive wind generator candidates with the prospective of up scaling to 20MW. The suggestions are based on a design tool especially built for this investigation. The in-built flexibility of the design tool gives...

  14. Advanced Vibration Analysis Tool Developed for Robust Engine Rotor Designs

    Science.gov (United States)

    Min, James B.

    2005-01-01

    The primary objective of this research program is to develop vibration analysis tools, design tools, and design strategies to significantly improve the safety and robustness of turbine engine rotors. Bladed disks in turbine engines always feature small, random blade-to-blade differences, or mistuning. Mistuning can lead to a dramatic increase in blade forced-response amplitudes and stresses. Ultimately, this results in high-cycle fatigue, which is a major safety and cost concern. In this research program, the necessary steps will be taken to transform a state-of-the-art vibration analysis tool, the Turbo- Reduce forced-response prediction code, into an effective design tool by enhancing and extending the underlying modeling and analysis methods. Furthermore, novel techniques will be developed to assess the safety of a given design. In particular, a procedure will be established for using natural-frequency curve veerings to identify ranges of operating conditions (rotational speeds and engine orders) in which there is a great risk that the rotor blades will suffer high stresses. This work also will aid statistical studies of the forced response by reducing the necessary number of simulations. Finally, new strategies for improving the design of rotors will be pursued.

  15. Utility assessment of a map-based online geo-collaboration tool.

    Science.gov (United States)

    Sidlar, Christopher L; Rinner, Claus

    2009-05-01

    Spatial group decision-making processes often include both informal and analytical components. Discussions among stakeholders or planning experts are an example of an informal component. When participants discuss spatial planning projects they typically express concerns and comments by pointing to places on a map. The Argumentation Map model provides a conceptual basis for collaborative tools that enable explicit linkages of arguments to the places to which they refer. These tools allow for the input of explicitly geo-referenced arguments as well as the visual access to arguments through a map interface. In this paper, we will review previous utility studies in geo-collaboration and evaluate a case study of a Web-based Argumentation Map application. The case study was conducted in the summer of 2005 when student participants discussed planning issues on the University of Toronto St. George campus. During a one-week unmoderated discussion phase, 11 participants wrote 60 comments on issues such as safety, facilities, parking, and building aesthetics. By measuring the participants' use of geographic references, we draw conclusions on how well the software tool supported the potential of the underlying concept. This research aims to contribute to a scientific approach to geo-collaboration in which the engineering of novel spatial decision support methods is complemented by a critical assessment of their utility in controlled, realistic experiments.

  16. New tools for the simulation and design of calorimeters

    International Nuclear Information System (INIS)

    Womersley, W.J.

    1989-01-01

    Two new approaches to the simulation and design of large hermetic calorimeters are presented. Firstly, the Shower Library scheme used in the fast generation of showers in the Monte Carlo of the calorimeter for the D-Zero experiment at the Fermilab Tevatron is described. Secondly, a tool for the design future calorimeters is described, which can be integrated with a computer aided design system to give engineering designers an immediate idea of the relative physics capabilities of different geometries. 9 refs., 6 figs., 1 tab

  17. Development and Evaluation of a Web Map Mind Tool Environment with the Theory of Spatial Thinking and Project-Based Learning Strategy

    Science.gov (United States)

    Hou, Huei-Tse; Yu, Tsai-Fang; Wu, Yi-Xuan; Sung, Yao-Ting; Chang, Kuo-En

    2016-01-01

    The theory of spatial thinking is relevant to the learning and teaching of many academic domains. One promising method to facilitate learners' higher-order thinking is to utilize a web map mind tool to assist learners in applying spatial thinking to cooperative problem solving. In this study, an environment is designed based on the theory of…

  18. Computing tools for implementing standards for single-case designs.

    Science.gov (United States)

    Chen, Li-Ting; Peng, Chao-Ying Joanne; Chen, Ming-E

    2015-11-01

    In the single-case design (SCD) literature, five sets of standards have been formulated and distinguished: design standards, assessment standards, analysis standards, reporting standards, and research synthesis standards. This article reviews computing tools that can assist researchers and practitioners in meeting the analysis standards recommended by the What Works Clearinghouse: Procedures and Standards Handbook-the WWC standards. These tools consist of specialized web-based calculators or downloadable software for SCD data, and algorithms or programs written in Excel, SAS procedures, SPSS commands/Macros, or the R programming language. We aligned these tools with the WWC standards and evaluated them for accuracy and treatment of missing data, using two published data sets. All tools were tested to be accurate. When missing data were present, most tools either gave an error message or conducted analysis based on the available data. Only one program used a single imputation method. This article concludes with suggestions for an inclusive computing tool or environment, additional research on the treatment of missing data, and reasonable and flexible interpretations of the WWC standards. © The Author(s) 2015.

  19. VALUE STREAM MAPPING AS LEAN PRODUCTION TOOL TO IMPROVE THE PRODUCTION PROCESS ORGANIZATION – CASE STUDY IN PACKAGING MANUFACTURING

    Directory of Open Access Journals (Sweden)

    Dorota Klimecka-Tatar

    2018-01-01

    Full Text Available In the paper, the method of the production process improvement with the use of lean production tools has been presented. The Value Stream Mapping (VSM for the cardboard packaging produc-tion process has been presented. On the basis of the current state map (CSM, areas for improvement have been designated - 5 organizational changes of the process were marked out. To minimize the three basic losses excessive storage, unnecessary movement and delays, the changes were introduced in the method of inter-operative transport, supervision of the storage condition (input and output of the process, control at the processing operation and the use of a production loop. As a result of the changes, it is possible to shorten the process time, shorten the total time of operations adding value and reduce the number of non-compliant products.

  20. Development of a Competency Mapping Tool for Undergraduate Professional Degree Programmes, Using Mechanical Engineering as a Case Study

    Science.gov (United States)

    Holmes, David W.; Sheehan, Madoc; Birks, Melanie; Smithson, John

    2018-01-01

    Mapping the curriculum of a professional degree to the associated competency standard ensures graduates have the competence to perform as professionals. Existing approaches to competence mapping vary greatly in depth, complexity, and effectiveness, and a standardised approach remains elusive. This paper describes a new mapping software tool that…

  1. Consumer Intervention Mapping—A Tool for Designing Future Product Strategies within Circular Product Service Systems

    Directory of Open Access Journals (Sweden)

    Matt Sinclair

    2018-06-01

    Full Text Available Re-distributed manufacturing presents a number of opportunities and challenges for New Product Development in a future Circular Economy. It has been argued that small-scale, flexible and localised production systems will reduce resource consumption, lower transport emissions and extend product lifetimes. At the same time smart products within the Internet of Things will gather and report data on user behaviour and product status. Many sustainable design tools have previously been developed but few are able to imagine and develop visions of how future sustainable product service systems might be manifested. This paper introduces the concept of Consumer Intervention Mapping as a tool for creating future product strategies. The tool visualises the points within a product’s lifecycle where stakeholders are able to intervene in the product’s expected journey. This perspective enables the rapid construction of scenarios that explore and describe future circular product service systems. Validation of the tool in three workshops is described and the outcomes are presented. Consumer Intervention Mapping is successful in creating scenarios that describe existing product service systems and new product concepts adapted to a Circular Economy paradigm. Further work is required to refine the tool’s performance in more focused and reflective design exercises.

  2. Interactive Spacecraft Trajectory Design Strategies Featuring Poincare Map Topology

    Science.gov (United States)

    Schlei, Wayne R.

    Space exploration efforts are shifting towards inexpensive and more agile vehicles. Versatility regarding spacecraft trajectories refers to the agility to correct deviations from an intended path or even the ability to adapt the future path to a new destination--all with limited spaceflight resources (i.e., small DeltaV budgets). Trajectory design methods for such nimble vehicles incorporate equally versatile procedures that allow for rapid and interactive decision making while attempting to reduce Delta V budgets, leading to a versatile trajectory design platform. A versatile design paradigm requires the exploitation of Poincare map topology , or the interconnected web of dynamical structures, existing within the chaotic dynamics of multi-body gravitational models to outline low-Delta V transfer options residing nearby to a current path. This investigation details an autonomous procedure to extract the periodic orbits (topology nodes) and correlated asymptotic flow structures (or the invariant manifolds representing topology links). The autonomous process summarized in this investigation (termed PMATE) overcomes discontinuities on the Poincare section that arise in the applied multi-body model (the planar circular restricted three-body problem) and detects a wide variety of novel periodic orbits. New interactive capabilities deliver a visual analytics foundation for versatile spaceflight design, especially for initial guess generation and manipulation. Such interactive strategies include the selection of states and arcs from Poincare section visualizations and the capabilities to draw and drag trajectories to remove dependency on initial state input. Furthermore, immersive selection is expanded to cull invariant manifold structures, yielding low-DeltaV or even DeltaV-free transfers between periodic orbits. The application of interactive design strategies featuring a dense extraction of Poincare map topology is demonstrated for agile spaceflight with a simple

  3. Analytical Modelling Of Milling For Tool Design And Selection

    International Nuclear Information System (INIS)

    Fontaine, M.; Devillez, A.; Dudzinski, D.

    2007-01-01

    This paper presents an efficient analytical model which allows to simulate a large panel of milling operations. A geometrical description of common end mills and of their engagement in the workpiece material is proposed. The internal radius of the rounded part of the tool envelope is used to define the considered type of mill. The cutting edge position is described for a constant lead helix and for a constant local helix angle. A thermomechanical approach of oblique cutting is applied to predict forces acting on the tool and these results are compared with experimental data obtained from milling tests on a 42CrMo4 steel for three classical types of mills. The influence of some tool's geometrical parameters on predicted cutting forces is presented in order to propose optimisation criteria for design and selection of cutting tools

  4. A new design of automatic vertical drilling tool

    Directory of Open Access Journals (Sweden)

    Yanfeng Ma

    2015-09-01

    Full Text Available In order to effectively improve penetration rates and enhance wellbore quality for vertical wells, a new Automatic Vertical Drilling Tool (AVDT based on Eccentric Braced Structure (EBS is designed. Applying operating principle of rotary steering drilling, AVDT adds offset gravity block automatic induction inclination mechanism. When hole straightening happens, tools take essentric moment to be produced by gravity of offset gravity lock to control the bearing of guide force, so that well straightening is achieved. The normal tool's size of the AVDT is designed as 215.9 mm,other major components' sizes are worked out by the result of theoretical analysis, including the offset angle of EBS. This paper aims to introduce the structure, operating principle, theoretical analysis and describe the key components' parameters setting of the AVDT.

  5. Automatic differentiation as a tool in engineering design

    Science.gov (United States)

    Barthelemy, Jean-Francois; Hall, Laura E.

    1992-01-01

    Automatic Differentiation (AD) is a tool that systematically implements the chain rule of differentiation to obtain the derivatives of functions calculated by computer programs. AD is assessed as a tool for engineering design. The forward and reverse modes of AD, their computing requirements, as well as approaches to implementing AD are discussed. The application of two different tools to two medium-size structural analysis problems to generate sensitivity information typically necessary in an optimization or design situation is also discussed. The observation is made that AD is to be preferred to finite differencing in most cases, as long as sufficient computer storage is available; in some instances, AD may be the alternative to consider in lieu of analytical sensitivity analysis.

  6. Designing a tool for curriculum leadership development in postgraduate programs

    Directory of Open Access Journals (Sweden)

    M Avizhgan

    2016-07-01

    Full Text Available Introduction: Leadership in the area of curriculum development is increasingly important as we look for ways to improve our programmes and practices. In curriculum studies, leadership has received little attention. Considering the lack of an evaluation tool with objective criteria in postgraduate curriculum leadership process, this study aimed to design a specific tool and determine the validity and reliability of the tool. Method: This study is a methodological research.  At first, domains and items of the tool were determined through expert interviews and literature review. Then, using Delphi technique, 54 important criteria were developed. A panel of experts was used to confirm content and face validity. Reliability was determined by a descriptive study in which 30 faculties from two of Isfahan universities and was estimated by internal consistency. The data were analyzed by SPSS software, using Pearson Correlation Coefficient and reliability analysis. Results: At first, considering the definition of curriculum leadership determined the domains and items of the tool and they were developed primary tool. Expert’s faculties’ views were used in deferent stages of development and psychometry. The tool internal consistency with Cronbach's alpha coefficient times was 96.5. This was determined for each domain separately. Conclution: Applying this instrument can improve the effectiveness of curriculum leadership. Identifying the characteristics of successful and effective leaders, and utilizing this knowledge in developing and implementing curriculum might help us to have better respond to the changing needs of our students, teachers and schools of tomorrow.

  7. Structure for Categorization of EcoDesign Methods and Tools

    OpenAIRE

    Lindahl, Mattias; Ekermann, Sara

    2013-01-01

    This edited volume presents the proceedings of the 20th CIRP LCE Conference, which cover various areas in life cycle engineering such as life cycle design, end-of-life management, manufacturing processes, manufacturing systems, methods and tools for sustainability, social sustainability, supply chain management, remanufacturing,

  8. Use of Software Tools in Teaching Relational Database Design.

    Science.gov (United States)

    McIntyre, D. R.; And Others

    1995-01-01

    Discusses the use of state-of-the-art software tools in teaching a graduate, advanced, relational database design course. Results indicated a positive student response to the prototype of expert systems software and a willingness to utilize this new technology both in their studies and in future work applications. (JKP)

  9. On Computational Fluid Dynamics Tools in Architectural Design

    DEFF Research Database (Denmark)

    Kirkegaard, Poul Henning; Hougaard, Mads; Stærdahl, Jesper Winther

    engineering computational fluid dynamics (CFD) simulation program ANSYS CFX and a CFD based representative program RealFlow are investigated. These two programs represent two types of CFD based tools available for use during phases of an architectural design process. However, as outlined in two case studies...

  10. Bioinformatic tools and guideline for PCR primer design | Abd ...

    African Journals Online (AJOL)

    Bioinformatics has become an essential tool not only for basic research but also for applied research in biotechnology and biomedical sciences. Optimal primer sequence and appropriate primer concentration are essential for maximal specificity and efficiency of PCR. A poorly designed primer can result in little or no ...

  11. Remediating a Design Tool: Implications of Digitizing Sticky Notes

    DEFF Research Database (Denmark)

    Jensen, Mads Møller; Rädle, Roman; Klokmose, Clemens Nylandsted

    2018-01-01

    digital sticky notes setup. The paper contributes with a nuanced understanding of what happens when remediating a physical design tool into digital space, by emphasizing focus shifts and breakdowns caused by the technology, but also benefits and promises inherent in the digital media. Despite users...... their use and understanding, yielding new concerns regarding cross-device transfer and collaboration....

  12. Design principles of a web interface for monitoring tools

    International Nuclear Information System (INIS)

    Aiftimiei, C; Pra, S D; Fantinel, S; Andreozzi, S; Fattibene, E; Misurelli, G; Cuscela, G; Donvito, G; Dudhalkar, V; Maggi, G; Pierro, A

    2008-01-01

    A monitoring tool of a complex Grid system can gather a huge amount of information that have to be presented to the users in the most comprehensive way. Moreover different types of consumers could be interested in inspecting and analyzing different subsets of data. The main goal in designing a Web interface for the presentation of monitoring information is to organize the huge amount of data in a simple, user-friendly and usable structure. One more problem is to consider different approaches, skills and interests that all the possible categories of users have in looking for the desired information. Starting from the Information Architecture guidelines for the Web, it is possible to design Web interfaces towards a closer user experience and to deal with an advanced user interaction through the implementation of many Web standard technologies. In this paper, we will present a number of principles for the design of Web interface for monitoring tools that provide a wider, richer range of possibilities for what concerns the user interaction. These principles are based on an extensive review of the current literature in Web design and on the experience with the development of the GridICE monitoring tool. The described principles can drive the evolution of the Web interface of Grid monitoring tools

  13. Reflective Drawing as a Tool for Reflection in Design Research

    Science.gov (United States)

    Calvo, Mirian

    2017-01-01

    This article explores the role of drawing as a tool for reflection. It reports on a PhD research project that aims to identify and analyse the value that co-design processes can bring to participants and their communities. The research is associated with Leapfrog, a three-year project funded by the UK Arts and Humanities Research Council (AHRC).…

  14. The Design of Tools for Sketching Sensor-Based Interaction

    DEFF Research Database (Denmark)

    Brynskov, Martin; Lunding, Rasmus; Vestergaard, Lasse Steenbock

    2012-01-01

    , flexibility and cost, aimed at wearable and ultra-mobile prototyping where fast reaction is needed (e.g. in controlling sound), and we discuss the general issues facing this category of embodied interaction design tools. We then present the platform in more detail, both regarding hard- ware and software...

  15. Design tool for the thermal energy potential of asphalt pavements

    NARCIS (Netherlands)

    Loomans, M.G.L.C.; Oversloot, H.P.; Bondt, A. de; Jansen, R.; Rij, H. van

    2003-01-01

    This paper describes the development of a design tool for the calculation of the thermal energy potential of a so-called asphalt collector. Two types of numerical models have been developed and validated against experimental results from a full-scale test-site. The validation showed to be a tedious

  16. Logical Framework Analysis (LFA): An Essential Tool for Designing ...

    African Journals Online (AJOL)

    Evaluation of a project at any stage of its life cycle, especially at its planning stage, is necessary for its successful execution and completion. The Logical Framework Analysis or the Logical Framework Approach (LFA) is an essential tool in designing such evaluation because it is a process that serves as a reference guide in ...

  17. Software tools to aid Pascal and Ada program design

    Energy Technology Data Exchange (ETDEWEB)

    Jankowitz, H.T.

    1987-01-01

    This thesis describes a software tool which analyses the style and structure of Pascal and Ada programs by ensuring that some minimum design requirements are fulfilled. The tool is used in much the same way as a compiler is used to teach students the syntax of a language, only in this case issues related to the design and structure of the program are of paramount importance. The tool operates by analyzing the design and structure of a syntactically correct program, automatically generating a report detailing changes that need to be made in order to ensure that the program is structurally sound. The author discusses how the model gradually evolved from a plagiarism detection system which extracted several measurable characteristics in a program to a model that analyzed the style of Pascal programs. In order to incorporate more-sophistical concepts like data abstraction, information hiding and data protection, this model was then extended to analyze the composition of Ada programs. The Ada model takes full advantage of facilities offered in the language and by using this tool the standard and quality of written programs is raised whilst the fundamental principles of program design are grasped through a process of self-tuition.

  18. Enhanced surrogate models for statistical design exploiting space mapping technology

    DEFF Research Database (Denmark)

    Koziel, Slawek; Bandler, John W.; Mohamed, Achmed S.

    2005-01-01

    We present advances in microwave and RF device modeling exploiting Space Mapping (SM) technology. We propose new SM modeling formulations utilizing input mappings, output mappings, frequency scaling and quadratic approximations. Our aim is to enhance circuit models for statistical analysis...

  19. Scalable Multi-core Architectures Design Methodologies and Tools

    CERN Document Server

    Jantsch, Axel

    2012-01-01

    As Moore’s law continues to unfold, two important trends have recently emerged. First, the growth of chip capacity is translated into a corresponding increase of number of cores. Second, the parallalization of the computation and 3D integration technologies lead to distributed memory architectures. This book provides a current snapshot of industrial and academic research, conducted as part of the European FP7 MOSART project, addressing urgent challenges in many-core architectures and application mapping.  It addresses the architectural design of many core chips, memory and data management, power management, design and programming methodologies. It also describes how new techniques have been applied in various industrial case studies. Describes trends towards distributed memory architectures and distributed power management; Integrates Network on Chip with distributed, shared memory architectures; Demonstrates novel design methodologies and frameworks for multi-core design space exploration; Shows how midll...

  20. Optomechanical stability design of space optical mapping camera

    Science.gov (United States)

    Li, Fuqiang; Cai, Weijun; Zhang, Fengqin; Li, Na; Fan, Junjie

    2018-01-01

    According to the interior orientation elements and imaging quality requirements of mapping application to mapping camera and combined with off-axis three-mirror anastigmat(TMA) system, high optomechanical stability design of a space optical mapping camera is introduced in this paper. The configuration is a coaxial TMA system used in off-axis situation. Firstly, the overall optical arrangement is described., and an overview of the optomechanical packaging is provided. Zerodurglass, carbon fiber composite and carbon-fiber reinforced silicon carbon (C/SiC) are widely used in the optomechanical structure, because their low coefficient of thermal expansion (CTE) can reduce the thermal sensitivity of the mirrors and focal plane. Flexible and unloading support are used in reflector and camera supporting structure. Epoxy structural adhesives is used for bonding optics to metal structure is also introduced in this paper. The primary mirror is mounted by means of three-point ball joint flexures system, which is attach to the back of the mirror. Then, In order to predict flexural displacements due to gravity, static finite element analysis (FEA) is performed on the primary mirror. The optical performance peak-to-valley (PV) and root-mean-square (RMS) wavefront errors are detected before and after assemble. Also, the dynamic finite element analysis(FEA) of the whole optical arrangement is carried out as to investigate the performance of optomechanical. Finally, in order to evaluate the stability of the design, the thermal vacuum test and vibration test are carried out and the Modulation Transfer Function (MTF) and elements of interior orientation are presented as the evaluation index. Before and after the thermal vacuum test and vibration test, the MTF, focal distance and position of the principal point of optical system are measured and the result is as expected.

  1. Software project management tools in global software development: a systematic mapping study.

    Science.gov (United States)

    Chadli, Saad Yasser; Idri, Ali; Ros, Joaquín Nicolás; Fernández-Alemán, José Luis; de Gea, Juan M Carrillo; Toval, Ambrosio

    2016-01-01

    Global software development (GSD) which is a growing trend in the software industry is characterized by a highly distributed environment. Performing software project management (SPM) in such conditions implies the need to overcome new limitations resulting from cultural, temporal and geographic separation. The aim of this research is to discover and classify the various tools mentioned in literature that provide GSD project managers with support and to identify in what way they support group interaction. A systematic mapping study has been performed by means of automatic searches in five sources. We have then synthesized the data extracted and presented the results of this study. A total of 102 tools were identified as being used in SPM activities in GSD. We have classified these tools, according to the software life cycle process on which they focus and how they support the 3C collaboration model (communication, coordination and cooperation). The majority of the tools found are standalone tools (77%). A small number of platforms (8%) also offer a set of interacting tools that cover the software development lifecycle. Results also indicate that SPM areas in GSD are not adequately supported by corresponding tools and deserve more attention from tool builders.

  2. A strategic map for high-impact virtual experience design

    Science.gov (United States)

    Faste, Haakon; Bergamasco, Massimo

    2009-02-01

    We have employed methodologies of human centered design to inspire and guide the engineering of a definitive low-cost aesthetic multimodal experience intended to stimulate cultural growth. Using a combination of design research, trend analysis and the programming of immersive virtual 3D worlds, over 250 innovative concepts have been brainstormed, prototyped, evaluated and refined. These concepts have been used to create a strategic map for the development of highimpact virtual art experiences, the most promising of which have been incorporated into a multimodal environment programmed in the online interactive 3D platform XVR. A group of test users have evaluated the experience as it has evolved, using a multimodal interface with stereo vision, 3D audio and haptic feedback. This paper discusses the process, content, results, and impact on our engineering laboratory that this research has produced.

  3. Design and fabrication of multispectral optics using expanded glass map

    Science.gov (United States)

    Bayya, Shyam; Gibson, Daniel; Nguyen, Vinh; Sanghera, Jasbinder; Kotov, Mikhail; Drake, Gryphon; Deegan, John; Lindberg, George

    2015-06-01

    As the desire to have compact multispectral imagers in various DoD platforms is growing, the dearth of multispectral optics is widely felt. With the limited number of material choices for optics, these multispectral imagers are often very bulky and impractical on several weight sensitive platforms. To address this issue, NRL has developed a large set of unique infrared glasses that transmit from 0.9 to > 14 μm in wavelength and expand the glass map for multispectral optics with refractive indices from 2.38 to 3.17. They show a large spread in dispersion (Abbe number) and offer some unique solutions for multispectral optics designs. The new NRL glasses can be easily molded and also fused together to make bonded doublets. A Zemax compatible glass file has been created and is available upon request. In this paper we present some designs, optics fabrication and imaging, all using NRL materials.

  4. Tools for Stakeholder Involvement in Facility Management Service Design

    DEFF Research Database (Denmark)

    Nardelli, Giulia; Scupola, Ada

    that are more in line with the stakeholder needs and expectations, and may thus result in increased customer satisfaction, better services and, at the very end, an increased competitive advantage for the organization. Background: The background of this study lies in user involvement in service design...... in the design process as well as FM service provision processes. Research limitations: The major limitation of the study consists of the relatively small amount of interviews conducted, which is the basis for finding the tools in FM service design processes....

  5. A Shape Optimization Study for Tool Design in Resistance Welding

    DEFF Research Database (Denmark)

    Bogomolny, Michael; Bendsøe, Martin P.; Hattel, Jesper Henri

    2009-01-01

    The purpose of this study is to apply shape optimization tools for design of resistance welding electrodes. The numerical simulation of the welding process has been performed by a simplified FEM model implemented in COMSOL. The design process is formulated as an optimization problem where...... the objective is to prolong the life-time of the electrodes. Welding parameters like current, time and electrode shape parameters are selected to be the design variables while constraints are chosen to ensure a high quality of the welding. Surrogate models based on a Kriging approximation has been used in order...

  6. Equipment and special tool design for remote maintenance

    International Nuclear Information System (INIS)

    Northey, L.M.; Thomson, J.D.

    1985-01-01

    Maintenance tasks performed in locations with hostile environments and/or limited space accesses often require equipment that is operated remotely. This paper discusses considerations that should be addressed in the design of remote maintenance equipment. Some of the topics include proper material selection, interface identifications, operational feedback devices and cost limitations. These considerations add ''human engineering'' to the equipment design to assure protection of the tool and the operating personnel. Examples of remote maintenance and inspection systems that were developed by the Westinghouse Hanford Company and that utilize many of these design considerations are included

  7. Process Improvement Through Tool Integration in Aero-Mechanical Design

    Science.gov (United States)

    Briggs, Clark

    2010-01-01

    Emerging capabilities in commercial design tools promise to significantly improve the multi-disciplinary and inter-disciplinary design and analysis coverage for aerospace mechanical engineers. This paper explores the analysis process for two example problems of a wing and flap mechanical drive system and an aircraft landing gear door panel. The examples begin with the design solid models and include various analysis disciplines such as structural stress and aerodynamic loads. Analytical methods include CFD, multi-body dynamics with flexible bodies and structural analysis. Elements of analysis data management, data visualization and collaboration are also included.

  8. A Clinical Reasoning Tool for Virtual Patients: Design-Based Research Study.

    Science.gov (United States)

    Hege, Inga; Kononowicz, Andrzej A; Adler, Martin

    2017-11-02

    Clinical reasoning is a fundamental process medical students have to learn during and after medical school. Virtual patients (VP) are a technology-enhanced learning method to teach clinical reasoning. However, VP systems do not exploit their full potential concerning the clinical reasoning process; for example, most systems focus on the outcome and less on the process of clinical reasoning. Keeping our concept grounded in a former qualitative study, we aimed to design and implement a tool to enhance VPs with activities and feedback, which specifically foster the acquisition of clinical reasoning skills. We designed the tool by translating elements of a conceptual clinical reasoning learning framework into software requirements. The resulting clinical reasoning tool enables learners to build their patient's illness script as a concept map when they are working on a VP scenario. The student's map is compared with the experts' reasoning at each stage of the VP, which is technically enabled by using Medical Subject Headings, which is a comprehensive controlled vocabulary published by the US National Library of Medicine. The tool is implemented using Web technologies, has an open architecture that enables its integration into various systems through an open application program interface, and is available under a Massachusetts Institute of Technology license. We conducted usability tests following a think-aloud protocol and a pilot field study with maps created by 64 medical students. The results show that learners interact with the tool but create less nodes and connections in the concept map than an expert. Further research and usability tests are required to analyze the reasons. The presented tool is a versatile, systematically developed software component that specifically supports the clinical reasoning skills acquisition. It can be plugged into VP systems or used as stand-alone software in other teaching scenarios. The modular design allows an extension with new

  9. ArcCN-Runoff: An ArcGIS tool for generating curve number and runoff maps

    Science.gov (United States)

    Zhan, X.; Huang, M.-L.

    2004-01-01

    The development and the application of ArcCN-Runoff tool, an extension of ESRI@ ArcGIS software, are reported. This tool can be applied to determine curve numbers and to calculate runoff or infiltration for a rainfall event in a watershed. Implementation of GIS techniques such as dissolving, intersecting, and a curve-number reference table improve efficiency. Technical processing time may be reduced from days, if not weeks, to hours for producing spatially varied curve number and runoff maps. An application example for a watershed in Lyon County and Osage County, Kansas, USA, is presented. ?? 2004 Elsevier Ltd. All rights reserved.

  10. Justifying the design and selection of literacy and thinking tools

    Directory of Open Access Journals (Sweden)

    David Whitehead

    2008-10-01

    Full Text Available Criteria for the design and selection of literacy and thinking tools that allow educators to justify what they do are described within a wider framework of learning theory and research into best practice. Based on a meta-analysis of best practice, results from a three year project designed to evaluate the effectiveness of a secondary school literacy initiative in New Zealand, together with recent research from cognitive and neuro-psychologists, it is argued that the design and selection of literacy and thinking tools used in elementary schools should be consistent with (i teaching focused (ii learner focused, (iii thought linked (iv neurologically consistent, (v subject specific, (vi text linked, (vii developmentally appropriate, and (viii assessment linked criteria.

  11. Design tool for TOF and SL based 3D cameras.

    Science.gov (United States)

    Bouquet, Gregory; Thorstensen, Jostein; Bakke, Kari Anne Hestnes; Risholm, Petter

    2017-10-30

    Active illumination 3D imaging systems based on Time-of-flight (TOF) and Structured Light (SL) projection are in rapid development, and are constantly finding new areas of application. In this paper, we present a theoretical design tool that allows prediction of 3D imaging precision. Theoretical expressions are developed for both TOF and SL imaging systems. The expressions contain only physically measurable parameters and no fitting parameters. We perform 3D measurements with both TOF and SL imaging systems, showing excellent agreement between theoretical and measured distance precision. The theoretical framework can be a powerful 3D imaging design tool, as it allows for prediction of 3D measurement precision already in the design phase.

  12. SambVca 2. A Web Tool for Analyzing Catalytic Pockets with Topographic Steric Maps

    KAUST Repository

    Falivene, Laura; Credendino, Raffaele; Poater, Albert; Petta, Andrea; Serra, Luigi; Oliva, Romina; Scarano, Vittorio; Cavallo, Luigi

    2016-01-01

    Developing more efficient catalysts remains one of the primary targets of organometallic chemists. To accelerate reaching this goal, effective molecular descriptors and visualization tools can represent a remarkable aid. Here, we present a Web application for analyzing the catalytic pocket of metal complexes using topographic steric maps as a general and unbiased descriptor that is suitable for every class of catalysts. To show the broad applicability of our approach, we first compared the steric map of a series of transition metal complexes presenting popular mono-, di-, and tetracoordinated ligands and three classic zirconocenes. This comparative analysis highlighted similarities and differences between totally unrelated ligands. Then, we focused on a recently developed Fe(II) catalyst that is active in the asymmetric transfer hydrogenation of ketones and imines. Finally, we expand the scope of these tools to rationalize the inversion of enantioselectivity in enzymatic catalysis, achieved by point mutation of three amino acids of mononuclear p-hydroxymandelate synthase.

  13. SambVca 2. A Web Tool for Analyzing Catalytic Pockets with Topographic Steric Maps

    KAUST Repository

    Falivene, Laura

    2016-06-27

    Developing more efficient catalysts remains one of the primary targets of organometallic chemists. To accelerate reaching this goal, effective molecular descriptors and visualization tools can represent a remarkable aid. Here, we present a Web application for analyzing the catalytic pocket of metal complexes using topographic steric maps as a general and unbiased descriptor that is suitable for every class of catalysts. To show the broad applicability of our approach, we first compared the steric map of a series of transition metal complexes presenting popular mono-, di-, and tetracoordinated ligands and three classic zirconocenes. This comparative analysis highlighted similarities and differences between totally unrelated ligands. Then, we focused on a recently developed Fe(II) catalyst that is active in the asymmetric transfer hydrogenation of ketones and imines. Finally, we expand the scope of these tools to rationalize the inversion of enantioselectivity in enzymatic catalysis, achieved by point mutation of three amino acids of mononuclear p-hydroxymandelate synthase.

  14. Robust Unconventional Interaction Design and Hybrid Tool Environments for Design and Engineering Processes

    NARCIS (Netherlands)

    Wendrich, Robert E.; Kruiper, Ruben

    2017-01-01

    This paper investigates how and whether existing or current design tools, assist and support designers and engineers in the early-phases of ideation and conceptualization stages of design and engineering processes. The research explores how fluidly and/or congruously technology affords cognitive,

  15. Social dataset analysis and mapping tools for Risk Perception: resilience, people preparation and communication tools

    Science.gov (United States)

    Peters-Guarin, Graciela; Garcia, Carolina; Frigerio, Simone

    2010-05-01

    Perception has been identified as resource and part of the resilience of a community to disasters. Risk perception, if present, may determine the potential damage a household or community experience. Different levels of risk perception and preparedness can influence directly people's susceptibility and the way they might react in case of an emergency caused by natural hazards. In spite of the profuse literature about risk perception, works to spatially portray this feature are really scarce. The spatial relationship to danger or hazard is being recognised as an important factor of the risk equation; it can be used as a powerful tool either for better knowledge or for operational reasons (e.g. management of preventive information). Risk perception and people's awareness when displayed in a spatial format can be useful for several actors in the risk management arena. Local authorities and civil protection can better address educational activities to increase the preparation of particularly vulnerable groups of clusters of households within a community. It can also be useful for the emergency personal in order to optimally direct the actions in case of an emergency. In the framework of the Marie Curie Research Project, a Community Based Early Warning System (CBEWS) it's been developed in the Mountain Community Valtellina of Tirano, northern Italy. This community has been continuously exposed to different mass movements and floods, in particular, a large event in 1987 which affected a large portion of the valley and left 58 dead. The actual emergency plan for the study area is composed by a real time, highly detailed, decision support system. This emergency plan contains detailed instructions for the rapid deployment of civil protection and other emergency personal in case of emergency, for risk scenarios previously defined. Especially in case of a large event, where timely reaction is crucial for reducing casualties, it is important for those in charge of emergency

  16. An integrated user-friendly ArcMAP tool for bivariate statistical modeling in geoscience applications

    Science.gov (United States)

    Jebur, M. N.; Pradhan, B.; Shafri, H. Z. M.; Yusof, Z.; Tehrany, M. S.

    2014-10-01

    Modeling and classification difficulties are fundamental issues in natural hazard assessment. A geographic information system (GIS) is a domain that requires users to use various tools to perform different types of spatial modeling. Bivariate statistical analysis (BSA) assists in hazard modeling. To perform this analysis, several calculations are required and the user has to transfer data from one format to another. Most researchers perform these calculations manually by using Microsoft Excel or other programs. This process is time consuming and carries a degree of uncertainty. The lack of proper tools to implement BSA in a GIS environment prompted this study. In this paper, a user-friendly tool, BSM (bivariate statistical modeler), for BSA technique is proposed. Three popular BSA techniques such as frequency ratio, weights-of-evidence, and evidential belief function models are applied in the newly proposed ArcMAP tool. This tool is programmed in Python and is created by a simple graphical user interface, which facilitates the improvement of model performance. The proposed tool implements BSA automatically, thus allowing numerous variables to be examined. To validate the capability and accuracy of this program, a pilot test area in Malaysia is selected and all three models are tested by using the proposed program. Area under curve is used to measure the success rate and prediction rate. Results demonstrate that the proposed program executes BSA with reasonable accuracy. The proposed BSA tool can be used in numerous applications, such as natural hazard, mineral potential, hydrological, and other engineering and environmental applications.

  17. Excel Spreadsheet Tools for Analyzing Groundwater Level Records and Displaying Information in ArcMap

    Science.gov (United States)

    Tillman, Fred D.

    2009-01-01

    When beginning hydrologic investigations, a first action is often to gather existing sources of well information, compile this information into a single dataset, and visualize this information in a geographic information system (GIS) environment. This report presents tools (macros) developed using Visual Basic for Applications (VBA) for Microsoft Excel 2007 to assist in these tasks. One tool combines multiple datasets into a single worksheet and formats the resulting data for use by the other tools. A second tool produces summary information about the dataset, such as a list of unique site identification numbers, the number of water-level observations for each, and a table of the number of sites with a listed number of water-level observations. A third tool creates subsets of the original dataset based on user-specified options and produces a worksheet with water-level information for each well in the subset, including the average and standard deviation of water-level observations and maximum decline and rise in water levels between any two observations, among other information. This water-level information worksheet can be imported directly into ESRI ArcMap as an 'XY Data' file, and each of the fields of summary well information can be used for custom display. A separate set of VBA tools distributed in an additional Excel workbook creates hydrograph charts of each of the wells in the data subset produced by the aforementioned tools and produces portable document format (PDF) versions of the hydrograph charts. These PDF hydrographs can be hyperlinked to well locations in ArcMap or other GIS applications.

  18. Software simulation: a tool for enhancing control system design

    International Nuclear Information System (INIS)

    Sze, B.; Ridgway, G.H.

    2008-01-01

    The creation, implementation and management of engineering design tools are important to the quality and efficiency of any large engineering project. Some of the most complicated tools to develop are system simulators. The development and implementation of system simulators to support replacement fuel handling control systems is of particular interest to the Canadian nuclear industry given the current age of installations and the risk of obsolescence to many utilities. The use of such simulator tools has been known to significantly improve successful deployment of new software packages and maintenance-related software changes while reducing the time required for their overall development. Moreover, these simulation systems can also serve as operator training stations and provide a virtual environment for site engineers to test operational changes before they are uploaded to the actual system. (author)

  19. A Hybrid Genetic-Algorithm Space-Mapping Tool for the Optimization of Antennas

    DEFF Research Database (Denmark)

    Pantoja, Mario Fernández; Meincke, Peter; Bretones, Amelia Rubio

    2007-01-01

    A hybrid global-local optimization technique for the design of antennas is presented. It consists of the subsequent application of a genetic algorithm (GA) that employs coarse models in the simulations and a space mapping (SM) that refines the solution found in the previous stage. The technique...

  20. Process development and tooling design for intrinsic hybrid composites

    Science.gov (United States)

    Riemer, M.; Müller, R.; Drossel, W. G.; Landgrebe, D.

    2017-09-01

    Hybrid parts, which combine the advantages of different material classes, are moving into the focus of lightweight applications. This development is amplified by their high potential for usage in the field of crash relevant structures. By the current state of the art, hybrid parts are mainly made in separate, subsequent forming and joining processes. By using the concept of an intrinsic hybrid, the shaping of the part and the joining of the different materials are performed in a single process step for shortening the overall processing time and thereby the manufacturing costs. The investigated hybrid part is made from continuous fibre reinforced plastic (FRP), in which a metallic reinforcement structure is integrated. The connection between these layered components is realized by a combination of adhesive bonding and a geometrical form fit. The form fit elements are intrinsically generated during the forming process. This contribution regards the development of the forming process and the design of the forming tool for the single step production of a hybrid part. To this end a forming tool, which combines the thermo-forming and the metal forming process, is developed. The main challenge by designing the tool is the temperature management of the tool elements for the variothermal forming process. The process parameters are determined in basic tests and finite element (FE) simulation studies. On the basis of these investigations a control concept for the steering of the motion axes and the tool temperature is developed. Forming tests are carried out with the developed tool and the manufactured parts are analysed by computer assisted tomography (CT) scans.

  1. CADYRI, a dynamic mapping tool of human risk associated with flooding in urban areas

    Science.gov (United States)

    Tanguy, M.; Chokmani, K.; Bernier, M.; Poulin, J.

    2013-12-01

    When a flood affects an urban area, the managers and services responsible for public safety need precise and real time information on the localization of the flooded areas, on the submersion heights in those areas, but also on the vulnerability of people exposed to this hazard. Such information is essential for an effective crisis management. Despite a growing interest in this topic over the last 15 years, the development of flood risk assessment tools mainly focused on quantitative modeling of the monetary damages caused by floods to residential buildings or to critical infrastructures. Little attention was paid to the vulnerability of people exposed to flooding but also to the effects of the failure or destruction of critical infrastructures and residential building on people health and security during the disaster. Moreover, these models do not integrate the dynamic features of the flood (extent, submersion heights) and the evolution of human vulnerability in the same mapping tool. Thus, an accurate and precise evaluation of human risk induced by urban flooding is hardly feasible using such models. This study presents CADYRI, a dynamic mapping tool of human risk associated with flooding in urban areas, which fills the actual needs in terms of flood risk evaluation and management. This innovative tool integrates a methodology of flood hazard mapping that simulates, for a given discharge, the associated water level, and subsequently determines the extent of the flooded area and the submersion heights at each point of the flooded area, using a DEM. The dynamics of human vulnerability is then mapped at the household level, according to the characteristics of the flood hazard. Three key components of human vulnerability have been identified and are integrated to CADYRI: 1, the intrinsic vulnerability of the population, estimated by specific socio-economic indicators; 2, the vulnerability of buildings, assessed by their structural features; 3, the vulnerability of

  2. Designing tools for oil exploration using nuclear modeling

    Directory of Open Access Journals (Sweden)

    Mauborgne Marie-Laure

    2017-01-01

    Full Text Available When designing nuclear tools for oil exploration, one of the first steps is typically nuclear modeling for concept evaluation and initial characterization. Having an accurate model, including the availability of accurate cross sections, is essential to reduce or avoid time consuming and costly design iterations. During tool response characterization, modeling is benchmarked with experimental data and then used to complement and to expand the database to make it more detailed and inclusive of more measurement environments which are difficult or impossible to reproduce in the laboratory. We present comparisons of our modeling results obtained using the ENDF/B-VI and ENDF/B-VII cross section data bases, focusing on the response to a few elements found in the tool, borehole and subsurface formation. For neutron-induced inelastic and capture gamma ray spectroscopy, major obstacles may be caused by missing or inaccurate cross sections for essential materials. We show examples of the benchmarking of modeling results against experimental data obtained during tool characterization and discuss observed discrepancies.

  3. Designing tools for oil exploration using nuclear modeling

    Science.gov (United States)

    Mauborgne, Marie-Laure; Allioli, Françoise; Manclossi, Mauro; Nicoletti, Luisa; Stoller, Chris; Evans, Mike

    2017-09-01

    When designing nuclear tools for oil exploration, one of the first steps is typically nuclear modeling for concept evaluation and initial characterization. Having an accurate model, including the availability of accurate cross sections, is essential to reduce or avoid time consuming and costly design iterations. During tool response characterization, modeling is benchmarked with experimental data and then used to complement and to expand the database to make it more detailed and inclusive of more measurement environments which are difficult or impossible to reproduce in the laboratory. We present comparisons of our modeling results obtained using the ENDF/B-VI and ENDF/B-VII cross section data bases, focusing on the response to a few elements found in the tool, borehole and subsurface formation. For neutron-induced inelastic and capture gamma ray spectroscopy, major obstacles may be caused by missing or inaccurate cross sections for essential materials. We show examples of the benchmarking of modeling results against experimental data obtained during tool characterization and discuss observed discrepancies.

  4. Metal Cutting Theory and Friction Stir Welding Tool Design

    Science.gov (United States)

    Payton, Lewis N.

    2003-01-01

    Friction Stir Welding (FSW) is a relatively new industrial process that was invented at The Weld Institute (TWI, United Kingdom) and patented in 1992 under research funded by in part by the National Aeronautics and Space Administration (NASA). Often quoted advantages of the process include good strength and ductility along with minimization of residual stress and distortion. Less well advertised are the beneficial effects of this solid state welding process in the field of occupational and environmental safety. It produces superior weld products in difficult to weld materials without producing any toxic fumes or solid waste that must be controlled as hazardous waste. In fact, it reduces noise pollution in the workspace as well. In the early days of FSW, most welding was performed on modified machine tools, in particular on milling machines with modified milling cutters. In spite of the obvious milling heritage of the process, the techniques and lessons learned from almost 250 years of successful metalworking with milling machines have not been applied in the field of modern Friction Stir Welding. The goal of the current research was to study currently successful FSW tools and parameterize the process in such a way that the design of new tools for new materials could be accelerated. Along the way, several successful new tooling designs were developed for current issues at the Marshall Space Flight Center with accompanying patent disclosures

  5. Justifying the design and selection of literacy and thinking tools

    Directory of Open Access Journals (Sweden)

    David Whitehead

    2008-10-01

    Full Text Available Criteria for the design and selection of literacy and thinking tools that allow educators to justifywhat they do are described within a wider framework of learning theory and research into bestpractice. Based on a meta-analysis of best practice, results from a three year project designedto evaluate the effectiveness of a secondary school literacy initiative in New Zealand, togetherwith recent research from cognitive and neuro-psychologists, it is argued that the design andselection of literacy and thinking tools used in elementary schools should be consistent with (iteaching focused (ii learner focused, (iii thought linked (iv neurologically consistent, (vsubject specific, (vi text linked, (vii developmentally appropriate, and (viii assessment linkedcriteria.

  6. The Design of Tools for Sketching Sensor-Based Interaction

    DEFF Research Database (Denmark)

    Brynskov, Martin; Lunding, Rasmus; Vestergaard, Lasse Steenbock

    2012-01-01

    In this paper we motivate, present, and give an initial evaluation of DUL Radio, a small wireless toolkit for sketching sensor-based interaction. In the motivation, we discuss the purpose of this specific platform, which aims to balance ease-of-use (learning, setup, initialization), size, speed......, flexibility and cost, aimed at wearable and ultra-mobile prototyping where fast reaction is needed (e.g. in controlling sound), and we discuss the general issues facing this category of embodied interaction design tools. We then present the platform in more detail, both regarding hard- ware and software....... In the brief evaluation, we present our initial experiences with the platform both in design projects and in teaching. We conclude that DUL Radio does seem to be a relatively easy-to-use tool for sketching sensor-based interaction compared to other solutions, but that there are many ways to improve it. Target...

  7. A Method for Design of Modular Reconfigurable Machine Tools

    Directory of Open Access Journals (Sweden)

    Zhengyi Xu

    2017-02-01

    Full Text Available Presented in this paper is a method for the design of modular reconfigurable machine tools (MRMTs. An MRMT is capable of using a minimal number of modules through reconfiguration to perform the required machining tasks for a family of parts. The proposed method consists of three steps: module identification, module determination, and layout synthesis. In the first step, the module components are collected from a family of general-purpose machines to establish a module library. In the second step, for a given family of parts to be machined, a set of needed modules are selected from the module library to construct a desired reconfigurable machine tool. In the third step, a final machine layout is decided though evaluation by considering a number of performance indices. Based on this method, a software package has been developed that can design an MRMT for a given part family.

  8. GIS tools for analyzing accidents and road design: A review

    Energy Technology Data Exchange (ETDEWEB)

    Satria, R.

    2016-07-01

    A significant unexpected outcome of transportation systems is road accidents with injuries and loss of lives. In recent years, the number of studies about the tools for analyzing accidents and road design has increased considerably. Among these tools, Geographical Information Systems (GIS) stand out for their ability to perform complex spatial analyses. However, sometimes the GIS, has been used only as a geographical database to store and represent data about accidents and road characteristics. It has also been used to represent the results of statistical studies of accidents but, these statistical studies have not been carried out with GIS. Owing to its integrated statistical-analysis capabilities GIS provides several advantages. First, it allows a more careful and accurate data selection, screening and reduction. Also, it allows a spatial analysis of the results in pre and post-processing. Second, GIS allows the development of spatial statistics that rely on geographically-referenced data. In this paper, several GIS tools used to model accidents have been examined. The understanding of these tools will help the analyst to make a better decision about which tool could be applied in each particular condition and context. (Author)

  9. Seismic hazard maps for earthquake-resistant construction designs

    International Nuclear Information System (INIS)

    Ohkawa, Izuru

    2004-01-01

    Based on the idea that seismic phenomena in Japan varying in different localities are to be reflected in designing specific nuclear facilities in specific site, the present research program started to make seismic hazard maps representing geographical distribution of seismic load factors. First, recent research data on historical earthquakes and materials on active faults in Japan have been documented. Differences in character due to different localities are expressed by dynamic load in consideration of specific building properties. Next, hazard evaluation corresponding to seismic-resistance factor is given as response index (spectrum) of an adequately selected building, for example a nuclear power station, with the help of investigation results of statistical analysis. (S. Ohno)

  10. Topology and boundary shape optimization as an integrated design tool

    Science.gov (United States)

    Bendsoe, Martin Philip; Rodrigues, Helder Carrico

    1990-01-01

    The optimal topology of a two dimensional linear elastic body can be computed by regarding the body as a domain of the plane with a high density of material. Such an optimal topology can then be used as the basis for a shape optimization method that computes the optimal form of the boundary curves of the body. This results in an efficient and reliable design tool, which can be implemented via common FEM mesh generator and CAD type input-output facilities.

  11. Learning Asset Technology Integration Support Tool Design Document

    Science.gov (United States)

    2010-05-11

    language known as Hypertext Preprocessor ( PHP ) and by MySQL – a relational database management system that can also be used for content management. It...Requirements The LATIST tool will be implemented utilizing a WordPress platform with MySQL as the database. Also the LATIST system must effectively work... MySQL . When designing the LATIST system there are several considerations which must be accounted for in the working prototype. These include: • DAU

  12. Design of a Power Tool Attachment for Sawing Operation

    Directory of Open Access Journals (Sweden)

    Mayur Appaiah

    2015-07-01

    Full Text Available The Design of a Power Tool Attachment for Sawing Operation is discussed. First, the Target Specifications are established. The Design work is carried out, especially that of the Main Shaft and Support Tube. Calculations and Finite Element Analysis (FEA are also done. The Prototype is fabricated and assembled. The Testing of the prototype is done, by Sawing commercial plywood of maximum thickness 25mm. Weight of the Attachment is 1.3 kg, and the Machine is easy to use, benefitting unskilled users.

  13. Development of reactor design aid tool using virtual reality technology

    International Nuclear Information System (INIS)

    Mizuguchi, N.; Tamura, Y.; Imagawa, S.; Sagara, A.; Hayashi, T.

    2006-01-01

    A new type of aid system for fusion reactor design, to which the virtual reality (VR) visualization and sonification techniques are applied, is developed. This system provides us with an intuitive interaction environment in the VR space between the observer and the designed objects constructed by the conventional 3D computer-aided design (CAD) system. We have applied the design aid tool to the heliotron-type fusion reactor design activity FFHR2m [A. Sagara, S. Imagawa, O. Mitarai, T. Dolan, T. Tanaka, Y. Kubota, et al., Improved structure and long -life blanket concepts for heliotron reactors, Nucl. Fusion 45 (2005) 258-263] on the virtual reality system CompleXcope [Y. Tamura, A. Kageyama, T. Sato, S. Fujiwara, H. Nakamura, Virtual reality system to visualize and auralize numerical imulation data, Comp. Phys. Comm. 142 (2001) 227-230] of the National Institute for Fusion Science, Japan, and have evaluated its performance. The tool includes the functions of transfer of the observer, translation and scaling of the objects, recording of the operations and the check of interference

  14. Designing ETL Tools to Feed a Data Warehouse Based on Electronic Healthcare Record Infrastructure.

    Science.gov (United States)

    Pecoraro, Fabrizio; Luzi, Daniela; Ricci, Fabrizio L

    2015-01-01

    Aim of this paper is to propose a methodology to design Extract, Transform and Load (ETL) tools in a clinical data warehouse architecture based on the Electronic Healthcare Record (EHR). This approach takes advantages on the use of this infrastructure as one of the main source of information to feed the data warehouse, taking also into account that clinical documents produced by heterogeneous legacy systems are structured using the HL7 CDA standard. This paper describes the main activities to be performed to map the information collected in the different types of document with the dimensional model primitives.

  15. Mapping Cultural Frame Shifting in Interaction Design with Blending Theory

    DEFF Research Database (Denmark)

    Markussen, Thomas; Krogh, Peter Gall

    2008-01-01

    In this paper, we introduce Gilles Fauconnier & Mark Turner's blending theory as a new conceptual framework for explaining ‘cultural frame shifting' in interaction design. Cultural frame shifting is when people, through their explorative use of technology, are required imaginatively to reorganize...... their cultural background knowledge and expectations. In current HCI research it has occasionally been pointed out that a proper understanding of this phenomenon hinges on addressing the relationship between embodied interaction and cultural meaning construction as part of a larger interactive system. However...... the network model of mental spaces from Fauconnier & Turner's blending theory onto video material and interviews from initial qualitative use studies of a design case. In so doing we explore and argue for how meaning formation and embodied cognition coalesce in cultural frame shifting and provide a tool...

  16. Applying CBR to machine tool product configuration design oriented to customer requirements

    Science.gov (United States)

    Wang, Pengjia; Gong, Yadong; Xie, Hualong; Liu, Yongxian; Nee, Andrew Yehching

    2017-01-01

    Product customization is a trend in the current market-oriented manufacturing environment. However, deduction from customer requirements to design results and evaluation of design alternatives are still heavily reliant on the designer's experience and knowledge. To solve the problem of fuzziness and uncertainty of customer requirements in product configuration, an analysis method based on the grey rough model is presented. The customer requirements can be converted into technical characteristics effectively. In addition, an optimization decision model for product planning is established to help the enterprises select the key technical characteristics under the constraints of cost and time to serve the customer to maximal satisfaction. A new case retrieval approach that combines the self-organizing map and fuzzy similarity priority ratio method is proposed in case-based design. The self-organizing map can reduce the retrieval range and increase the retrieval efficiency, and the fuzzy similarity priority ratio method can evaluate the similarity of cases comprehensively. To ensure that the final case has the best overall performance, an evaluation method of similar cases based on grey correlation analysis is proposed to evaluate similar cases to select the most suitable case. Furthermore, a computer-aided system is developed using MATLAB GUI to assist the product configuration design. The actual example and result on an ETC series machine tool product show that the proposed method is effective, rapid and accurate in the process of product configuration. The proposed methodology provides a detailed instruction for the product configuration design oriented to customer requirements.

  17. Working towards a clearer and more helpful hazard map: investigating the influence of hazard map design on hazard communication

    Science.gov (United States)

    Thompson, M. A.; Lindsay, J. M.; Gaillard, J.

    2015-12-01

    Globally, geological hazards are communicated using maps. In traditional hazard mapping practice, scientists analyse data about a hazard, and then display the results on a map for stakeholder and public use. However, this one-way, top-down approach to hazard communication is not necessarily effective or reliable. The messages which people take away will be dependent on the way in which they read, interpret, and understand the map, a facet of hazard communication which has been relatively unexplored. Decades of cartographic studies suggest that variables in the visual representation of data on maps, such as colour and symbology, can have a powerful effect on how people understand map content. In practice, however, there is little guidance or consistency in how hazard information is expressed and represented on maps. Accordingly, decisions are often made based on subjective preference, rather than research-backed principles. Here we present the results of a study in which we explore how hazard map design features can influence hazard map interpretation, and we propose a number of considerations for hazard map design. A series of hazard maps were generated, with each one showing the same probabilistic volcanic ashfall dataset, but using different verbal and visual variables (e.g., different colour schemes, data classifications, probabilistic formats). Following a short pilot study, these maps were used in an online survey of 110 stakeholders and scientists in New Zealand. Participants answered 30 open-ended and multiple choice questions about ashfall hazard based on the different maps. Results suggest that hazard map design can have a significant influence on the messages readers take away. For example, diverging colour schemes were associated with concepts of "risk" and decision-making more than sequential schemes, and participants made more precise estimates of hazard with isarithmic data classifications compared to binned or gradational shading. Based on such

  18. How does sustainability certification affect the design process? Mapping final design projects at an architectural office

    DEFF Research Database (Denmark)

    Landgren, Mathilde; Jensen, Lotte Bjerregaard

    2017-01-01

    process and informing the industry of them. This has led to optimised design processes such as Integrated Energy Design, in which many decisions related to energy consumption and indoor climate are made in the early design stages. The current tendency is to use an expanded notion of sustainability......, derived from the sustainability certification system itself, and to apply it even in the early design process. This perspective emphasises all phases of the life cycle of a building. The goal of the present study was to map how a Danish architectural office approached sustainability in the projects......The context of the study is the very strict regulation of energy consumption for operating buildings in Denmark. It is difficult to meet the requirements by system optimisation in the final design phase, so recent research has focused on ways of meeting the target by adapting the whole design...

  19. Design of Scalable and Effective Earth Science Collaboration Tool

    Science.gov (United States)

    Maskey, M.; Ramachandran, R.; Kuo, K. S.; Lynnes, C.; Niamsuwan, N.; Chidambaram, C.

    2014-12-01

    Collaborative research is growing rapidly. Many tools including IDEs are now beginning to incorporate new collaborative features. Software engineering research has shown the effectiveness of collaborative programming and analysis. In particular, drastic reduction in software development time resulting in reduced cost has been highlighted. Recently, we have witnessed the rise of applications that allow users to share their content. Most of these applications scale such collaboration using cloud technologies. Earth science research needs to adopt collaboration technologies to reduce redundancy, cut cost, expand knowledgebase, and scale research experiments. To address these needs, we developed the Earth science collaboration workbench (CWB). CWB provides researchers with various collaboration features by augmenting their existing analysis tools to minimize learning curve. During the development of the CWB, we understood that Earth science collaboration tasks are varied and we concluded that it is not possible to design a tool that serves all collaboration purposes. We adopted a mix of synchronous and asynchronous sharing methods that can be used to perform collaboration across time and location dimensions. We have used cloud technology for scaling the collaboration. Cloud has been highly utilized and valuable tool for Earth science researchers. Among other usages, cloud is used for sharing research results, Earth science data, and virtual machine images; allowing CWB to create and maintain research environments and networks to enhance collaboration between researchers. Furthermore, collaborative versioning tool, Git, is integrated into CWB for versioning of science artifacts. In this paper, we present our experience in designing and implementing the CWB. We will also discuss the integration of collaborative code development use cases for data search and discovery using NASA DAAC and simulation of satellite observations using NASA Earth Observing System Simulation

  20. GPU-BSM: a GPU-based tool to map bisulfite-treated reads.

    Directory of Open Access Journals (Sweden)

    Andrea Manconi

    Full Text Available Cytosine DNA methylation is an epigenetic mark implicated in several biological processes. Bisulfite treatment of DNA is acknowledged as the gold standard technique to study methylation. This technique introduces changes in the genomic DNA by converting cytosines to uracils while 5-methylcytosines remain nonreactive. During PCR amplification 5-methylcytosines are amplified as cytosine, whereas uracils and thymines as thymine. To detect the methylation levels, reads treated with the bisulfite must be aligned against a reference genome. Mapping these reads to a reference genome represents a significant computational challenge mainly due to the increased search space and the loss of information introduced by the treatment. To deal with this computational challenge we devised GPU-BSM, a tool based on modern Graphics Processing Units. Graphics Processing Units are hardware accelerators that are increasingly being used successfully to accelerate general-purpose scientific applications. GPU-BSM is a tool able to map bisulfite-treated reads from whole genome bisulfite sequencing and reduced representation bisulfite sequencing, and to estimate methylation levels, with the goal of detecting methylation. Due to the massive parallelization obtained by exploiting graphics cards, GPU-BSM aligns bisulfite-treated reads faster than other cutting-edge solutions, while outperforming most of them in terms of unique mapped reads.

  1. An Intracranial Electroencephalography (iEEG Brain Function Mapping Tool with an Application to Epilepsy Surgery Evaluation

    Directory of Open Access Journals (Sweden)

    Yinghua eWang

    2016-04-01

    Full Text Available Object: Before epilepsy surgeries, intracranial electroencephalography (iEEG is often employed in function mapping and epileptogenic foci localization. Although the implanted electrodes provide crucial information for epileptogenic zone resection, a convenient clinical tool for electrode position registration and brain function mapping visualization is still lacking. In this study, we developed a Brain Function Mapping (BFM Tool, which facilitates electrode position registration and brain function mapping visualization, with an application to epilepsy surgeries.Methods: The BFM Tool mainly utilizes electrode location registration and function mapping based on pre-defined brain models from other software. In addition, the electrode node and mapping properties, such as the node size/color, edge color / thickness, mapping method, can be adjusted easily using the setting panel. Moreover, users may manually import / export location and connectivity data to generate figures for further application. The role of this software is demonstrated by a clinical study of language area localization.Results: The BFM Tool helps clinical doctors and researchers visualize implanted electrodes and brain functions in an easy, quick and flexible manner.Conclusions: Our tool provides convenient electrode registration, easy brain function visualization, and has good performance. It is clinical-oriented and is easy to deploy and use. The BFM tool is suitable for epilepsy and other clinical iEEG applications.

  2. Rotorcraft Optimization Tools: Incorporating Rotorcraft Design Codes into Multi-Disciplinary Design, Analysis, and Optimization

    Science.gov (United States)

    Meyn, Larry A.

    2018-01-01

    One of the goals of NASA's Revolutionary Vertical Lift Technology Project (RVLT) is to provide validated tools for multidisciplinary design, analysis and optimization (MDAO) of vertical lift vehicles. As part of this effort, the software package, RotorCraft Optimization Tools (RCOTOOLS), is being developed to facilitate incorporating key rotorcraft conceptual design codes into optimizations using the OpenMDAO multi-disciplinary optimization framework written in Python. RCOTOOLS, also written in Python, currently supports the incorporation of the NASA Design and Analysis of RotorCraft (NDARC) vehicle sizing tool and the Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics II (CAMRAD II) analysis tool into OpenMDAO-driven optimizations. Both of these tools use detailed, file-based inputs and outputs, so RCOTOOLS provides software wrappers to update input files with new design variable values, execute these codes and then extract specific response variable values from the file outputs. These wrappers are designed to be flexible and easy to use. RCOTOOLS also provides several utilities to aid in optimization model development, including Graphical User Interface (GUI) tools for browsing input and output files in order to identify text strings that are used to identify specific variables as optimization input and response variables. This paper provides an overview of RCOTOOLS and its use

  3. Synthetic RNAs for Gene Regulation: Design Principles and Computational Tools

    International Nuclear Information System (INIS)

    Laganà, Alessandro; Shasha, Dennis; Croce, Carlo Maria

    2014-01-01

    The use of synthetic non-coding RNAs for post-transcriptional regulation of gene expression has not only become a standard laboratory tool for gene functional studies but it has also opened up new perspectives in the design of new and potentially promising therapeutic strategies. Bioinformatics has provided researchers with a variety of tools for the design, the analysis, and the evaluation of RNAi agents such as small-interfering RNA (siRNA), short-hairpin RNA (shRNA), artificial microRNA (a-miR), and microRNA sponges. More recently, a new system for genome engineering based on the bacterial CRISPR-Cas9 system (Clustered Regularly Interspaced Short Palindromic Repeats), was shown to have the potential to also regulate gene expression at both transcriptional and post-transcriptional level in a more specific way. In this mini review, we present RNAi and CRISPRi design principles and discuss the advantages and limitations of the current design approaches.

  4. Synthetic RNAs for Gene Regulation: Design Principles and Computational Tools

    Energy Technology Data Exchange (ETDEWEB)

    Laganà, Alessandro [Department of Molecular Virology, Immunology and Medical Genetics, Comprehensive Cancer Center, The Ohio State University, Columbus, OH (United States); Shasha, Dennis [Courant Institute of Mathematical Sciences, New York University, New York, NY (United States); Croce, Carlo Maria [Department of Molecular Virology, Immunology and Medical Genetics, Comprehensive Cancer Center, The Ohio State University, Columbus, OH (United States)

    2014-12-11

    The use of synthetic non-coding RNAs for post-transcriptional regulation of gene expression has not only become a standard laboratory tool for gene functional studies but it has also opened up new perspectives in the design of new and potentially promising therapeutic strategies. Bioinformatics has provided researchers with a variety of tools for the design, the analysis, and the evaluation of RNAi agents such as small-interfering RNA (siRNA), short-hairpin RNA (shRNA), artificial microRNA (a-miR), and microRNA sponges. More recently, a new system for genome engineering based on the bacterial CRISPR-Cas9 system (Clustered Regularly Interspaced Short Palindromic Repeats), was shown to have the potential to also regulate gene expression at both transcriptional and post-transcriptional level in a more specific way. In this mini review, we present RNAi and CRISPRi design principles and discuss the advantages and limitations of the current design approaches.

  5. IT-based wellness tools for older adults: Design concepts and feedback.

    Science.gov (United States)

    Joe, Jonathan; Hall, Amanda; Chi, Nai-Ching; Thompson, Hilaire; Demiris, George

    2018-03-01

    To explore older adults' preferences regarding e-health applications through use of generated concepts that inform wellness tool design. The 6-8-5 method and affinity mapping were used to create e-health design ideas that were translated into storyboards and scenarios. Focus groups were conducted to obtain feedback on the prototypes and included participant sketching. A qualitative analysis of the focus groups for emerging themes was conducted, and sketches were analyzed. Forty-three older adults participated in six focus group sessions. The majority of participants found the wellness tools useful. Preferences included features that supported participants in areas of unmet needs, such as ability to find reliable health information, cognitive training, or maintaining social ties. Participants favored features such as use of voice navigation, but were concerned over cost and the need for technology skills and access. Sketches reinforced these wants, including portability, convenience, and simplicity. Several factors were found to increase the desirability of such devices including convenient access to their health and health information, a simple, accessible interface, and support for memory issues. Researchers and designers should incorporate the feedback of older adults regarding wellness tools, so that future designs meet the needs of older adults.

  6. LSNR Airborne LIDAR Mapping System Design and Early Results (Invited)

    Science.gov (United States)

    Shrestha, K.; Carter, W. E.; Slatton, K. C.

    2009-12-01

    Low signal-to-noise ratio (LSNR) detection techniques allow for implementation of airborne light detection and range (LIDAR) instrumentation aboard platforms with prohibitive power, size, and weight restrictions. The University of Florida has developed the Coastal Area Tactical-mapping System (CATS), a prototype LSNR LIDAR system capable of single photon laser ranging. CATS is designed to operate in a fixed-wing aircraft flying 600 m above ground level, producing 532 nm, 480 ps, 3 μJ output pulses at 8 kHz. To achieve continuous coverage of the terrain with 20 cm spatial resolution in a single pass, a 10x10 array of laser beamlets is scanned. A Risley prism scanner (two rotating V-coated optical wedges) allows the array of laser beamlets to be deflected in a variety of patterns, including conical, spiral, and lines at selected angles to the direction of flight. Backscattered laser photons are imaged onto a 100 channel (10x10 segmented-anode) photomultiplier tube (PMT) with a micro-channel plate (MCP) amplifier. Each channel of the PMT is connected to a multi-stop 2 GHz event timer. Here we report on tests in which ranges for known targets were accumulated for repeated laser shots and statistical analyses were applied to evaluate range accuracy, minimum separation distance, bathymetric mapping depth, and atmospheric scattering. Ground-based field test results have yielded 10 cm range accuracy and sub-meter feature identification at variable scan settings. These experiments also show that a secondary surface can be detected at a distance of 15 cm from the first. Range errors in secondary surface identification for six separate trials were within 7.5 cm, or within the timing resolution limit of the system. Operating at multi-photon sensitivity may have value for situations in which high ambient noise precludes single-photon sensitivity. Low reflectivity targets submerged in highly turbid waters can cause detection issues. CATS offers the capability to adjust the

  7. Towards Innovative Geospatial Tools for Fit-For Land Rights Mapping

    Science.gov (United States)

    Koeva, M.; Bennett, R.; Gerke, M.; Crommelinck, S.; Stöcker, C.; Crompvoets, J.; Ho, S.; Schwering, A.; Chipofya, M.; Schultz, C.; Zein, T.; Biraro, M.; Alemie, B.; Wayumba, R.; Kundert, K.

    2017-09-01

    In large parts of sub Saharan Africa it remains an ongoing challenging to map millions of unrecognized land rights. Existing approaches for recognizing these rights have proven inappropriate in many cases. A new generation of tools needs to be developed to support faster, cheaper, easier, and more responsible land rights mapping. This is the main goal of its4land, an European Commission Horizon 2020 project that aims to develop innovative tools inspired by the continuum of land rights, fit-for-purpose land administration, and cadastral intelligence. its4land is using strategic collaboration between the EU and East Africa to deliver innovative, scalable, and transferrable ICT solutions. The innovation process incorporates a broad range of stakeholders and emergent geospatial technologies, including smart sketchmaps, UAVs, automated feature extraction, as well as geocloud services. The aim is to combine innovative technologies, capture the specific needs, market opportunities and readiness of end-users in the domain of land tenure information recording in Eastern Africa. The project consists of a four year work plan, € 3.9M funding, and eight consortium partners collaborating with stakeholders from six case study locations in Ethiopia, Kenya, and Rwanda. The major tasks include tool development, prototyping, and demonstration for local, national, regional, and international interest groups. The case locations cover different land uses such as: urban, peri-urban, rural smallholder, and (former) pastoralist. This paper describes the project's activities within the first 18 months and covers barriers discovered, lessons learned and results achieved.

  8. Mechanical System Analysis/Design Tool (MSAT) Quick Guide

    Science.gov (United States)

    Lee, HauHua; Kolb, Mark; Madelone, Jack

    1998-01-01

    MSAT is a unique multi-component multi-disciplinary tool that organizes design analysis tasks around object-oriented representations of configuration components, analysis programs and modules, and data transfer links between them. This creative modular architecture enables rapid generation of input stream for trade-off studies of various engine configurations. The data transfer links automatically transport output from one application as relevant input to the next application once the sequence is set up by the user. The computations are managed via constraint propagation - the constraints supplied by the user as part of any optimization module. The software can be used in the preliminary design stage as well as during the detail design of product development process.

  9. OPTIMASI LINI PRODUKSI DENGAN VALUE STREAM MAPPING DAN VALUE STREAM ANALYSIS TOOLS

    Directory of Open Access Journals (Sweden)

    Yosua Caesar Fernando

    2014-12-01

    Full Text Available Meminimalkan pemborosan dalam proses produksi adalah salah satu tujuan dari suatu perusahaan. Lean adalah metode yang dapat meminimalkan pemborosan dalam proses produksi. Dalam penelitian ini, metode yang digunakan untuk meminimalkan limbah di PT. Bonindo Abadi adalah Value Stream Analysis Tools (VALSAT dan Value Stream Mapping (VSM. VSM digunakan untuk melihat kondisi peta keadaan pada perusahaan. Pengurangan pemborosan dilakukan dengan menggunakan salah satu alat dari VALSAT yaitu Process Activity Mapping (PAM. Jumlah non value added (NVA yang ditemukan dalam proses produksi PT. X adalah 90,17% diikuti oleh necessary but non value added (NNVA dengan jumlah 9,79% dan value added (VA sebesar 0,04%. Usulan perbaikan yang diberikan adalah dengan mengurangi jumlah waktu aktivitas NVA atau menghilangkannya.

  10. The global hidden hunger indices and maps: an advocacy tool for action.

    Science.gov (United States)

    Muthayya, Sumithra; Rah, Jee Hyun; Sugimoto, Jonathan D; Roos, Franz F; Kraemer, Klaus; Black, Robert E

    2013-01-01

    The unified global efforts to mitigate the high burden of vitamin and mineral deficiency, known as hidden hunger, in populations around the world are crucial to the achievement of most of the Millennium Development Goals (MDGs). We developed indices and maps of global hidden hunger to help prioritize program assistance, and to serve as an evidence-based global advocacy tool. Two types of hidden hunger indices and maps were created based on i) national prevalence data on stunting, anemia due to iron deficiency, and low serum retinol levels among preschool-aged children in 149 countries; and ii) estimates of Disability Adjusted Life Years (DALYs) attributed to micronutrient deficiencies in 136 countries. A number of countries in sub-Saharan Africa, as well as India and Afghanistan, had an alarmingly high level of hidden hunger, with stunting, iron deficiency anemia, and vitamin A deficiency all being highly prevalent. The total DALY rates per 100,000 population, attributed to micronutrient deficiencies, were generally the highest in sub-Saharan African countries. In 36 countries, home to 90% of the world's stunted children, deficiencies of micronutrients were responsible for 1.5-12% of the total DALYs. The pattern and magnitude of iodine deficiency did not conform to that of other micronutrients. The greatest proportions of children with iodine deficiency were in the Eastern Mediterranean (46.6%), European (44.2%), and African (40.4%) regions. The current indices and maps provide crucial data to optimize the prioritization of program assistance addressing global multiple micronutrient deficiencies. Moreover, the indices and maps serve as a useful advocacy tool in the call for increased commitments to scale up effective nutrition interventions.

  11. The Global Hidden Hunger Indices and Maps: An Advocacy Tool for Action

    Science.gov (United States)

    Muthayya, Sumithra; Rah, Jee Hyun; Sugimoto, Jonathan D.; Roos, Franz F.; Kraemer, Klaus; Black, Robert E.

    2013-01-01

    The unified global efforts to mitigate the high burden of vitamin and mineral deficiency, known as hidden hunger, in populations around the world are crucial to the achievement of most of the Millennium Development Goals (MDGs). We developed indices and maps of global hidden hunger to help prioritize program assistance, and to serve as an evidence-based global advocacy tool. Two types of hidden hunger indices and maps were created based on i) national prevalence data on stunting, anemia due to iron deficiency, and low serum retinol levels among preschool-aged children in 149 countries; and ii) estimates of Disability Adjusted Life Years (DALYs) attributed to micronutrient deficiencies in 136 countries. A number of countries in sub-Saharan Africa, as well as India and Afghanistan, had an alarmingly high level of hidden hunger, with stunting, iron deficiency anemia, and vitamin A deficiency all being highly prevalent. The total DALY rates per 100,000 population, attributed to micronutrient deficiencies, were generally the highest in sub-Saharan African countries. In 36 countries, home to 90% of the world’s stunted children, deficiencies of micronutrients were responsible for 1.5-12% of the total DALYs. The pattern and magnitude of iodine deficiency did not conform to that of other micronutrients. The greatest proportions of children with iodine deficiency were in the Eastern Mediterranean (46.6%), European (44.2%), and African (40.4%) regions. The current indices and maps provide crucial data to optimize the prioritization of program assistance addressing global multiple micronutrient deficiencies. Moreover, the indices and maps serve as a useful advocacy tool in the call for increased commitments to scale up effective nutrition interventions. PMID:23776712

  12. U.S. Environmental Protection Agency Office of Enforcement and Compliance Assurance New Mapping Tool for Enforcement Cases

    Data.gov (United States)

    U.S. Environmental Protection Agency — The new mapping tool shows facilities in the United States where the EPA concluded formal environmental enforcement actions between October 1, 2008 and September 30,...

  13. Bridging the Design-Science Gap with Tools: Science Learning and Design Behaviors in a Simulated Environment for Engineering Design

    Science.gov (United States)

    Chao, Jie; Xie, Charles; Nourian, Saeid; Chen, Guanhua; Bailey, Siobhan; Goldstein, Molly H.; Purzer, Senay; Adams, Robin S.; Tutwiler, M. Shane

    2017-01-01

    Many pedagogical innovations aim to integrate engineering design and science learning. However, students frequently show little attempt or have difficulties in connecting their design projects with the underlying science. Drawing upon the Cultural-Historical Activity Theory, we argue that the design tools available in a learning environment…

  14. CRESST Human Performance Knowledge Mapping System

    National Research Council Canada - National Science Library

    Chung, Gregory K; Michiuye, Joanne K; Brill, David G; Sinha, Ravi; Saadat, Farzad; de Vries, Linda F; Delacruz, Girlie C; Bewley, William L; Baker, Eva L

    2002-01-01

    .... While several tools exist that are available to construct knowledge maps, CRESST's knowledge mapping tool is one of the only systems designed specifically for assessment purposes, the only system...

  15. Design tool for offshore wind farm cluster planning

    DEFF Research Database (Denmark)

    Hasager, Charlotte Bay; Madsen, Peter Hauge; Giebel, Gregor

    2015-01-01

    In the framework of the FP7 project EERA DTOC: Design Tool for Offshore wind farm Cluster, a new software supporting the planning of offshore wind farms was developed, based on state-of-the-art approaches from large scale wind potential to economic benchmarking. The model portfolio includes WAs......P, FUGA, WRF, Net-Op, LCoE model, CorWind, FarmFlow, EeFarm and grid code compliance calculations. The development is done by members from European Energy Research Alliance (EERA) and guided by several industrial partners. A commercial spin-off from the project is the tool ‘Wind & Economy’. The software...... by the software and several tests were performed. The calculations include the smoothing effect on produced energy between wind farms located in different regional wind zones and the short time scales relevant for assessing balancing power. The grid code compliance was tested for several cases and the results...

  16. Colossal Tooling Design: 3D Simulation for Ergonomic Analysis

    Science.gov (United States)

    Hunter, Steve L.; Dischinger, Charles; Thomas, Robert E.; Babai, Majid

    2003-01-01

    The application of high-level 3D simulation software to the design phase of colossal mandrel tooling for composite aerospace fuel tanks was accomplished to discover and resolve safety and human engineering problems. The analyses were conducted to determine safety, ergonomic and human engineering aspects of the disassembly process of the fuel tank composite shell mandrel. Three-dimensional graphics high-level software, incorporating various ergonomic analysis algorithms, was utilized to determine if the process was within safety and health boundaries for the workers carrying out these tasks. In addition, the graphical software was extremely helpful in the identification of material handling equipment and devices for the mandrel tooling assembly/disassembly process.

  17. The synthesis map is a multidimensional educational tool that provides insight into students' mental models and promotes students' synthetic knowledge generation.

    Science.gov (United States)

    Ortega, Ryan A; Brame, Cynthia J

    2015-01-01

    Concept mapping was developed as a method of displaying and organizing hierarchical knowledge structures. Using the new, multidimensional presentation software Prezi, we have developed a new teaching technique designed to engage higher-level skills in the cognitive domain. This tool, synthesis mapping, is a natural evolution of concept mapping, which utilizes embedding to layer information within concepts. Prezi's zooming user interface lets the author of the presentation use both depth as well as distance to show connections between data, ideas, and concepts. Students in the class Biology of Cancer created synthesis maps to illustrate their knowledge of tumorigenesis. Students used multiple organizational schemes to build their maps. We present an analysis of student work, placing special emphasis on organization within student maps and how the organization of knowledge structures in student maps can reveal strengths and weaknesses in student understanding or instruction. We also provide a discussion of best practices for instructors who would like to implement synthesis mapping in their classrooms. © 2015 R. A. Ortega and C. J. Brame et al. CBE—Life Sciences Education © 2015 The American Society for Cell Biology. This article is distributed by The American Society for Cell Biology under license from the author(s). It is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  18. The Synthesis Map Is a Multidimensional Educational Tool That Provides Insight into Students’ Mental Models and Promotes Students’ Synthetic Knowledge Generation

    Science.gov (United States)

    Ortega, Ryan A.; Brame, Cynthia J.

    2015-01-01

    Concept mapping was developed as a method of displaying and organizing hierarchical knowledge structures. Using the new, multidimensional presentation software Prezi, we have developed a new teaching technique designed to engage higher-level skills in the cognitive domain. This tool, synthesis mapping, is a natural evolution of concept mapping, which utilizes embedding to layer information within concepts. Prezi’s zooming user interface lets the author of the presentation use both depth as well as distance to show connections between data, ideas, and concepts. Students in the class Biology of Cancer created synthesis maps to illustrate their knowledge of tumorigenesis. Students used multiple organizational schemes to build their maps. We present an analysis of student work, placing special emphasis on organization within student maps and how the organization of knowledge structures in student maps can reveal strengths and weaknesses in student understanding or instruction. We also provide a discussion of best practices for instructors who would like to implement synthesis mapping in their classrooms. PMID:25917385

  19. An integrated user-friendly ArcMAP tool for bivariate statistical modelling in geoscience applications

    Science.gov (United States)

    Jebur, M. N.; Pradhan, B.; Shafri, H. Z. M.; Yusoff, Z. M.; Tehrany, M. S.

    2015-03-01

    Modelling and classification difficulties are fundamental issues in natural hazard assessment. A geographic information system (GIS) is a domain that requires users to use various tools to perform different types of spatial modelling. Bivariate statistical analysis (BSA) assists in hazard modelling. To perform this analysis, several calculations are required and the user has to transfer data from one format to another. Most researchers perform these calculations manually by using Microsoft Excel or other programs. This process is time-consuming and carries a degree of uncertainty. The lack of proper tools to implement BSA in a GIS environment prompted this study. In this paper, a user-friendly tool, bivariate statistical modeler (BSM), for BSA technique is proposed. Three popular BSA techniques, such as frequency ratio, weight-of-evidence (WoE), and evidential belief function (EBF) models, are applied in the newly proposed ArcMAP tool. This tool is programmed in Python and created by a simple graphical user interface (GUI), which facilitates the improvement of model performance. The proposed tool implements BSA automatically, thus allowing numerous variables to be examined. To validate the capability and accuracy of this program, a pilot test area in Malaysia is selected and all three models are tested by using the proposed program. Area under curve (AUC) is used to measure the success rate and prediction rate. Results demonstrate that the proposed program executes BSA with reasonable accuracy. The proposed BSA tool can be used in numerous applications, such as natural hazard, mineral potential, hydrological, and other engineering and environmental applications.

  20. Implementing Dementia Care Mapping as a practice development tool in dementia care services: a systematic review

    Directory of Open Access Journals (Sweden)

    Surr CA

    2018-01-01

    Full Text Available Claire A Surr, Alys W Griffiths, Rachael Kelley Centre for Dementia Research, School of Health and Community Studies, Leeds Beckett University, Leeds, UK Abstract: Dementia Care Mapping (DCM is an observational tool set within a practice development process. Following training in the method, DCM is implemented via a cyclic process of briefing staff, conducting mapping observations, data analysis and report preparation, feedback to staff and action planning. Recent controlled studies of DCM’s efficacy have found heterogeneous results, and variability in DCM implementation has been indicated as a potential contributing factor. This review aimed to examine the primary research evidence on the processes and the barriers and facilitators to implementing DCM as a practice development method within formal dementia care settings. PUBMED, PsycINFO, CINAHL, The Cochrane Library-Cochrane reviews, HMIC (Ovid, Web of Science and Social Care Online were searched using the term “Dementia Care Mapping”. Inclusion criterion was primary research studies in any formal dementia care settings where DCM was used as a practice development tool and which included discussion/critique of the implementation processes. Assessment of study quality was conducted using the Mixed Methods Appraisal Tool. Twelve papers were included in the review, representing nine research studies. The papers included discussion of various components of the DCM process, including mapper selection and preparation; mapping observations; data analysis, report writing and feedback; and action planning. However, robust evidence on requirements for successful implementation of these components was limited. Barriers and facilitators to mapping were also discussed. The review found some consensus that DCM is more likely to be successfully implemented if the right people are selected to be trained as mappers, with appropriate mapper preparation and ongoing support and with effective leadership for

  1. SSME Investment in Turbomachinery Inducer Impeller Design Tools and Methodology

    Science.gov (United States)

    Zoladz, Thomas; Mitchell, William; Lunde, Kevin

    2010-01-01

    Within the rocket engine industry, SSME turbomachines are the de facto standards of success with regard to meeting aggressive performance requirements under challenging operational environments. Over the Shuttle era, SSME has invested heavily in our national inducer impeller design infrastructure. While both low and high pressure turbopump failures/anomaly resolution efforts spurred some of these investments, the SSME program was a major benefactor of key areas of turbomachinery inducer-impeller research outside of flight manifest pressures. Over the past several decades, key turbopump internal environments have been interrogated via highly instrumented hot-fire and cold-flow testing. Likewise, SSME has sponsored the advancement of time accurate and cavitating inducer impeller computation fluid dynamics (CFD) tools. These investments together have led to a better understanding of the complex internal flow fields within aggressive high performing inducers and impellers. New design tools and methodologies have evolved which intend to provide confident blade designs which strike an appropriate balance between performance and self induced load management.

  2. Materials modelling - a possible design tool for advanced nuclear applications

    International Nuclear Information System (INIS)

    Hoffelner, W.; Samaras, M.; Bako, B.; Iglesias, R.

    2008-01-01

    The design of components for power plants is usually based on codes, standards and design rules or code cases. However, it is very difficult to get the necessary experimental data to prove these lifetime assessment procedures for long-term applications in environments where complex damage interactions (temperature, stress, environment, irradiation) can occur. The rules used are often very simple and do not have a basis which take physical damage into consideration. The linear life fraction rule for creep and fatigue interaction can be taken as a prominent example. Materials modelling based on a multi-scale approach in principle provides a tool to convert microstructural findings into mechanical response and therefore has the capability of providing a set of tools for the improvement of design life assessments. The strength of current multi-scale modelling efforts is the insight they offer as regards experimental phenomena. To obtain an understanding of these phenomena it is import to focus on issues which are important at the various time and length scales of the modelling code. In this presentation the multi-scale path will be demonstrated with a few recent examples which focus on VHTR applications. (authors)

  3. Its4land - Challenges and Opportunities in Developing Innovative Geospatial Tools for Fit-For-Purpose Land Rights Mapping

    NARCIS (Netherlands)

    Koeva, M.N.; Crommelinck, S.; Stöcker, Claudia; Crompvoets, J.

    2018-01-01

    Mapping millions of unrecorded land rights in large parts of Sub-Saharan Africa remains a challenge. The results of many existing ICT-based approaches for recording these rights have often proven to be inappropriate; therefore, a new generation of tools needs to be developed to map land rights

  4. Methodologies and tools for proton beam design for lung tumors

    International Nuclear Information System (INIS)

    Moyers, Michael F.; Miller, Daniel W.; Bush, David A.; Slater, Jerry D.

    2001-01-01

    Purpose: Proton beams can potentially increase the dose delivered to lung tumors without increasing the dose to critical normal tissues because protons can be stopped before encountering the normal tissues. This potential can only be realized if tissue motion and planning uncertainties are correctly included during planning. This study evaluated several planning strategies to determine which method best provides adequate tumor coverage, minimal normal tissue irradiation, and simplicity of use. Methods and Materials: Proton beam treatment plans were generated using one or more of three different planning strategies. These strategies included designing apertures and boluses to the PTV, apertures to the PTV and boluses to the CTV, and aperture and bolus to the CTV. Results: The planning target volume as specified in ICRU Report 50 can be used only to design the lateral margins of beams, because the distal and proximal margins resulting from CT number uncertainty, beam range uncertainty, tissue motions, and setup uncertainties, are different than the lateral margins resulting from these same factors. The best strategy for target coverage with the planning tools available overirradiated some normal tissues unnecessarily. The available tools also made the planning of lung tumors difficult. Conclusions: This study demonstrated that inclusion of target motion and setup uncertainties into a plan should be performed in the beam design step instead of creating new targets. New computerized treatment planning system tools suggested by this study will ease planning, facilitate abandonment of the PTV concept, improve conformance of the dose distribution to the target, and improve conformal avoidance of critical normal tissues

  5. TabSQL: a MySQL tool to facilitate mapping user data to public databases.

    Science.gov (United States)

    Xia, Xiao-Qin; McClelland, Michael; Wang, Yipeng

    2010-06-23

    With advances in high-throughput genomics and proteomics, it is challenging for biologists to deal with large data files and to map their data to annotations in public databases. We developed TabSQL, a MySQL-based application tool, for viewing, filtering and querying data files with large numbers of rows. TabSQL provides functions for downloading and installing table files from public databases including the Gene Ontology database (GO), the Ensembl databases, and genome databases from the UCSC genome bioinformatics site. Any other database that provides tab-delimited flat files can also be imported. The downloaded gene annotation tables can be queried together with users' data in TabSQL using either a graphic interface or command line. TabSQL allows queries across the user's data and public databases without programming. It is a convenient tool for biologists to annotate and enrich their data.

  6. Analytical Design Package (ADP2): A computer aided engineering tool for aircraft transparency design

    Science.gov (United States)

    Wuerer, J. E.; Gran, M.; Held, T. W.

    1994-01-01

    The Analytical Design Package (ADP2) is being developed as a part of the Air Force Frameless Transparency Program (FTP). ADP2 is an integrated design tool consisting of existing analysis codes and Computer Aided Engineering (CAE) software. The objective of the ADP2 is to develop and confirm an integrated design methodology for frameless transparencies, related aircraft interfaces, and their corresponding tooling. The application of this methodology will generate high confidence for achieving a qualified part prior to mold fabrication. ADP2 is a customized integration of analysis codes, CAE software, and material databases. The primary CAE integration tool for the ADP2 is P3/PATRAN, a commercial-off-the-shelf (COTS) software tool. The open architecture of P3/PATRAN allows customized installations with different applications modules for specific site requirements. Integration of material databases allows the engineer to select a material, and those material properties are automatically called into the relevant analysis code. The ADP2 materials database will be composed of four independent schemas: CAE Design, Processing, Testing, and Logistics Support. The design of ADP2 places major emphasis on the seamless integration of CAE and analysis modules with a single intuitive graphical interface. This tool is being designed to serve and be used by an entire project team, i.e., analysts, designers, materials experts, and managers. The final version of the software will be delivered to the Air Force in Jan. 1994. The Analytical Design Package (ADP2) will then be ready for transfer to industry. The package will be capable of a wide range of design and manufacturing applications.

  7. Augmented reality as a design tool for mobile interfaces

    DEFF Research Database (Denmark)

    Bertelsen, Olav Wedege; Nielsen, Christina

    2000-01-01

    applications derived from the classification of augmented reality interfaces. The focus on physical interaction with objects of work and with the mobile device provides us with a range of interaction styles, based on e.g. gestures and manipulation of objects. Furthermore, issues of transparency and directness......This paper challenges user interface paradigms for mobile devices, by using the technical classification of augmented reality interfaces as a thinking tool to develop ideas for interaction with mobile devices. The paper presents future work scenarios from a wastewater treatment plant embodying PDA...... are addressed. The future scenarios indicate that the concepts of augmented reality support solving context problems in mobile design....

  8. A basic tool for computer-aided sail design

    International Nuclear Information System (INIS)

    Thrasher, D.F.; Dunyak, T.J.; Mook, D.T.; Nayfeh, A.H.

    1985-01-01

    Recent developments in modelling lifting surfaces have provided a tool that also can be used to model sails. The simplest of the adequate models is the vortex-lattice method. This method can fully account for the aerodynamic interactions among several lifting surfaces having arbitrary platforms, camber, and twist as long as separation occurs only along the edges and the phenomenon known as vortex bursting does not occur near the sails. This paper describes this method and how it can be applied to the design of sails

  9. SCREAMER: a single-line pulsed-power design tool

    International Nuclear Information System (INIS)

    Kiefer, M.L.; Widner, M.M.

    1985-01-01

    SCREAMER is a special purpose circuit code developed as a design tool for single module accelerators. It is fast, accurate, flexible, and user-friendly. Its development was motivated by the excessive costs and long turn-around times incurred when using the SCEPTRE circuit analysis code to perform simulations of circuits with large numbers of nodes and with nonlinear components. Comparable simulations between SCREAMER running on a VAX 11/780 and SCEPTRE running on a CRAY-1S show that turn-around times and costs can be two orders of magnitude lower when using SCREAMER

  10. SCREAMER - A single-line pulsed-power design tool

    International Nuclear Information System (INIS)

    Kiefer, M.L.; Widner, M.M.

    1985-01-01

    SCREAMER is a special purpose circuit code developed as a design tool for single module accelerators. it is fast, accurate, flexible, and user-friendly. Its development was motivated by the excessive costs and long turn-around times incurred when using the SCEPTRE circuit analysis code to perform simulations of circuits with large numbers of modes and with nonlinear components. Comparable simulations between SCREAMER running on a VAX 11/780 and SCEPTRE running on a CRAY-1S show that turn-around times and costs can be two orders of magnitude lower when using SCREAMER

  11. Concepts and tools for the design of semantical databases

    CERN Document Server

    Meersman, Robert A

    1991-01-01

    The design and implementation of modern more "semantical" databases involves the use of high-level conceptual abstraction mechanisms and methodologies. An illustration of this process is given using the NIAM method and notation (lecture 1), its transformation into relational database with triggers (e.g. using SYBASE0 (lecture 2) and a study of the requirements for suitable tools (RIDL*) and their extension and applicability for e.g. object-oriented databases. A case study defined by a complex database for document handling will be used as example (lecture 3).

  12. Designing an Intelligent Mobile Learning Tool for Grammar Learning (i-MoL

    Directory of Open Access Journals (Sweden)

    Munir Shuib

    2015-01-01

    Full Text Available English is the most important second language in most non-English speaking countries, including Malaysia. A good English proficiency comes from good grasp of grammar. To conquer the problems of low English proficiency among Malaysians, it is important to identify the key motivators that could facilitate the process of grammar learning. In this digital age, technology can play a very important role and mobile technology could be one of it. Thus, this study aims at designing a mobile learning tool, namely the Intelligent Mobile Learning Tool for Grammar Learning (i-MoL to act as the “on-the-go” grammar learning support via mobile phones. i-MoL helps reinforce grammar learning through mobile phone with game-like applications, inquiry-based activities and flashcard-like information. The intelligent part of i-MoL lies in its ability to map the mobile-based grammar learning content to individual’s preferred learning styles based on Felder-Silverman Learning Style Model (FSLSM. The instructional system design through the ADDIE model was used in this study as a systematic approach in designing a novel and comprehensive mobile learning tool for grammar learning. In terms of implications, this study provides insights on how mobile technologies can be utilized to meet the mobility demand among language learners today.

  13. Global shutdown dose rate maps for a DEMO conceptual design

    International Nuclear Information System (INIS)

    Leichtle, D.; Pereslavtsev, P.; Sanz, J.; Catalan, J.P.; Juarez, R.

    2015-01-01

    Highlights: • Application of R2S-method on high-resolution full torus sector mesh for DEMO. • Absorbed dose rates after shutdown for a variely of RH equipment at typical locations. • Idenification of radiation levels at several port based locations. - Abstract: For the calculations of highly reliable shutdown dose rate (SDR) maps in fusion devices like a DEMO plant, the Rigorous-2-step (R2S) method is nowadays routinely applied using high-resolution decay gamma sources from initial high-resolution neutron flux meshes activating all materials in the system. This approach has been utilized in the present paper with the objective to provide SDR results relevant for RH systems of a conceptual DEMO design developed in the EU. The primary objective was to assess specific locations of interest for RH equipment inside the vessel and along the extension of maintenance ports. To this end, a provisional DEMO MCNP model has been used, featuring HCLL-type blankets, tungsten/copper divertor, manifolds, vacuum vessel with ports and toroidal field coils. The operational scenario assumed 2.1 GW fusion power and a life-time of 20 years with plant availability of 30%, where removable parts will be extracted after 5.2 years. Results of absorbed dose rate distributions for several relevant materials are presented and discussed in terms of the different contributions from the various activated components.

  14. Global shutdown dose rate maps for a DEMO conceptual design

    Energy Technology Data Exchange (ETDEWEB)

    Leichtle, D., E-mail: dieter.leichtle@f4e.europa.eu [Karlsruhe Institute of Technology KIT, Institute for Neutron Physics and Reactor Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Pereslavtsev, P. [Karlsruhe Institute of Technology KIT, Institute for Neutron Physics and Reactor Technology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Sanz, J.; Catalan, J.P.; Juarez, R. [Universidad Nacional de Educación a Distancia(UNED), E.T.S. Ingenieros Industriales, C/ Juan del Rosal 12, 28040 Madrid (Spain)

    2015-10-15

    Highlights: • Application of R2S-method on high-resolution full torus sector mesh for DEMO. • Absorbed dose rates after shutdown for a variely of RH equipment at typical locations. • Idenification of radiation levels at several port based locations. - Abstract: For the calculations of highly reliable shutdown dose rate (SDR) maps in fusion devices like a DEMO plant, the Rigorous-2-step (R2S) method is nowadays routinely applied using high-resolution decay gamma sources from initial high-resolution neutron flux meshes activating all materials in the system. This approach has been utilized in the present paper with the objective to provide SDR results relevant for RH systems of a conceptual DEMO design developed in the EU. The primary objective was to assess specific locations of interest for RH equipment inside the vessel and along the extension of maintenance ports. To this end, a provisional DEMO MCNP model has been used, featuring HCLL-type blankets, tungsten/copper divertor, manifolds, vacuum vessel with ports and toroidal field coils. The operational scenario assumed 2.1 GW fusion power and a life-time of 20 years with plant availability of 30%, where removable parts will be extracted after 5.2 years. Results of absorbed dose rate distributions for several relevant materials are presented and discussed in terms of the different contributions from the various activated components.

  15. IT-tools for Mechatronic System Engineering and Design

    DEFF Research Database (Denmark)

    Conrad, Finn; Sørensen, Torben; Andersen, T. O.

    2003-01-01

    Companies are facing the on-going challenge that customers always increase their needs for capability of products and machinery. They want improved productivity and efficiency - if possible to lower prices; value for money. The demands often focus on extensions of functionality, faster response......, operation capability, man-machine interface (MMI), robustness, reliability and safety in use. Information Technology (IT) offers both software and hardware for improvement of the engineering design and industrial applications. The latest progress in IT makes integration of an overall design...... the Esprit project SWING on IT-tools for rapid prototyping of fluid power components and systems. A mechatronic test facility for a hydraulic robot and a CNC XY-machine table was implemented. The controller applies digital signal processors (DSPs). The DSP controller utilizes the dSPACE System suitable...

  16. APRON: A Cellular Processor Array Simulation and Hardware Design Tool

    Science.gov (United States)

    Barr, David R. W.; Dudek, Piotr

    2009-12-01

    We present a software environment for the efficient simulation of cellular processor arrays (CPAs). This software (APRON) is used to explore algorithms that are designed for massively parallel fine-grained processor arrays, topographic multilayer neural networks, vision chips with SIMD processor arrays, and related architectures. The software uses a highly optimised core combined with a flexible compiler to provide the user with tools for the design of new processor array hardware architectures and the emulation of existing devices. We present performance benchmarks for the software processor array implemented on standard commodity microprocessors. APRON can be configured to use additional processing hardware if necessary and can be used as a complete graphical user interface and development environment for new or existing CPA systems, allowing more users to develop algorithms for CPA systems.

  17. Evaluating comfort with varying temperatures: a graphic design tool

    Energy Technology Data Exchange (ETDEWEB)

    Evans, J.M. [Research Centre Habitat and Energy, Faculty of Architecture, Design and Urbanism, University of Buenos Aires, Ciudad Universitaria (Argentina)

    2002-07-01

    This paper considers the need to define comfort of indoor and outdoor spaces in relation to the daily variations of temperature. A graphical tool is presented, which indicates the daily swings of temperature, shown as a single point on a graph representing the average temperature and the maximum temperature swing. This point can be compared with the comfort zones for different activity levels, such as sedentary activity, sleeping, indoor and outdoor circulation according to the design proposals for different spaces. The graph allows the representation of climatic variables, the definition of comfort zones, the selection of bio climatic design resources and the evaluation of indoor temperatures, measured in actual buildings or obtained from computer simulations. The development of the graph is explained and examples given with special emphasis on the use of thermal mass. (author)

  18. APRON: A Cellular Processor Array Simulation and Hardware Design Tool

    Directory of Open Access Journals (Sweden)

    David R. W. Barr

    2009-01-01

    Full Text Available We present a software environment for the efficient simulation of cellular processor arrays (CPAs. This software (APRON is used to explore algorithms that are designed for massively parallel fine-grained processor arrays, topographic multilayer neural networks, vision chips with SIMD processor arrays, and related architectures. The software uses a highly optimised core combined with a flexible compiler to provide the user with tools for the design of new processor array hardware architectures and the emulation of existing devices. We present performance benchmarks for the software processor array implemented on standard commodity microprocessors. APRON can be configured to use additional processing hardware if necessary and can be used as a complete graphical user interface and development environment for new or existing CPA systems, allowing more users to develop algorithms for CPA systems.

  19. A design and performance analysis tool for superconducting RF systems

    International Nuclear Information System (INIS)

    Schilcher, T.; Simrock, S.N.; Merminga, L.; Wang, D.X.

    1997-01-01

    Superconducting rf systems are usually operated with continuous rf power or with rf pulse lengths exceeding 1 ms to maximize the overall wall plug power efficiency. Typical examples are CEBAF at the Thomas Jefferson National Accelerator Facility (Jefferson Lab) and the TESLA Test Facility at DESY. The long pulses allow for effective application of feedback to stabilize the accelerating field in presence of microphonics, Lorentz force detuning, and fluctuations of the beam current. In this paper the authors describe a set of tools to be used with MATLAB and SIMULINK, which allow to analyze the quality of field regulation for a given design. The tools include models for the cavities, the rf power source, the beam, sources of field perturbations, and the rf feedback system. The rf control relevant electrical and mechanical characteristics of the cavity are described in form of time-varying state space models. The power source is modeled as a current generator and includes saturation characteristics and noise.An arbitrary time structure can be imposed on the beam current to reflect a macro-pulse structure and bunch charge fluctuations. For rf feedback several schemes can be selected: Traditional amplitude and phase control as well as I/Q control. The choices for the feedback controller include analog or digital approaches and various choices of frequency response. Feed forward can be added to further suppress repetitive errors. The results of a performance analysis of the CEBAF and the TESLA Linac rf system using these tools are presented

  20. Preliminary Design Through Graphs: A Tool for Automatic Layout Distribution

    Directory of Open Access Journals (Sweden)

    Carlo Biagini

    2015-02-01

    Full Text Available Diagrams are essential in the preliminary stages of design for understanding distributive aspects and assisting the decision-making process. By drawing a schematic graph, designers can visualize in a synthetic way the relationships between many aspects: functions and spaces, distribution of layouts, space adjacency, influence of traffic flows within a facility layout, and so on. This process can be automated through the use of modern Information and Communication Technologies tools (ICT that allow the designers to manage a large quantity of information. The work that we will present is part of an on-going research project into how modern parametric software influences decision-making on the basis of automatic and optimized layout distribution. The method involves two phases: the first aims to define the ontological relation between spaces, with particular reference to a specific building typology (rules of aggregation of spaces; the second entails the implementation of these rules through the use of specialist software. The generation of ontological relations begins with the collection of data from historical manuals and analyses of case studies. These analyses aim to generate a “relationship matrix” based on preferences of space adjacency. The phase of implementing the previously defined rules is based on the use of Grasshopper to analyse and visualize different layout configurations. The layout is generated by simulating a process involving the collision of spheres, which represents specific functions of the design program. The spheres are attracted or rejected as a function of the relationships matrix, as defined above. The layout thus obtained will remain in a sort of abstract state independent of information about the exterior form, but will still provide a useful tool for the decision-making process. In addition, preliminary results gathered through the analysis of case studies will be presented. These results provide a good variety

  1. Visualizing the Geography of the Diseases of China: Western Disease Maps from Analytical Tools to Tools of Empire, Sovereignty, and Public Health Propaganda, 1878-1929.

    Science.gov (United States)

    Hanson, Marta

    2017-09-01

    Argument This article analyzes for the first time the earliest western maps of diseases in China spanning fifty years from the late 1870s to the end of the 1920s. The 24 featured disease maps present a visual history of the major transformations in modern medicine from medical geography to laboratory medicine wrought on Chinese soil. These medical transformations occurred within new political formations from the Qing dynasty (1644-1911) to colonialism in East Asia (Hong Kong, Taiwan, Manchuria, Korea) and hypercolonialism within China (Tianjin, Shanghai, Amoy) as well as the new Republican Chinese nation state (1912-49). As a subgenre of persuasive graphics, physicians marshaled disease maps for various rhetorical functions within these different political contexts. Disease maps in China changed from being mostly analytical tools to functioning as tools of empire, national sovereignty, and public health propaganda legitimating new medical concepts, public health interventions, and political structures governing over human and non-human populations.

  2. The design process and the use of computerized tools in control room design

    International Nuclear Information System (INIS)

    Wahlstroem, B.; Heinonen, R.; Ranta, J.; Haarla, J.

    1985-09-01

    Control room design has proven an important component when the safety and availability of a complex industrial process plant are considered. Many control room deficiencies can be traced back to oversights and other errors during the design process. The introduction of powerful computers and software for computer-aided design (CAD) offers one possibility when tools for improving the quality of design are being selected. The report gives a broad assessment of problems of design and the benefits of using computer-aided design. One proposal for a structure of a computer-aided design system is considered in more detail. In this system special emphasis has been laid on dealing with requirements during design process. A demonstration system has been built and sample system user dialogues are described. The report is the final report of the LIT3.1 project of the Nordic cooperation on human reliability in the energy production field. (author)

  3. Concept maps: A tool for knowledge management and synthesis in web-based conversational learning.

    Science.gov (United States)

    Joshi, Ankur; Singh, Satendra; Jaswal, Shivani; Badyal, Dinesh Kumar; Singh, Tejinder

    2016-01-01

    Web-based conversational learning provides an opportunity for shared knowledge base creation through collaboration and collective wisdom extraction. Usually, the amount of generated information in such forums is very huge, multidimensional (in alignment with the desirable preconditions for constructivist knowledge creation), and sometimes, the nature of expected new information may not be anticipated in advance. Thus, concept maps (crafted from constructed data) as "process summary" tools may be a solution to improve critical thinking and learning by making connections between the facts or knowledge shared by the participants during online discussion This exploratory paper begins with the description of this innovation tried on a web-based interacting platform (email list management software), FAIMER-Listserv, and generated qualitative evidence through peer-feedback. This process description is further supported by a theoretical construct which shows how social constructivism (inclusive of autonomy and complexity) affects the conversational learning. The paper rationalizes the use of concept map as mid-summary tool for extracting information and further sense making out of this apparent intricacy.

  4. Digital administrative maps – A tool for visualization of epidemiological data

    Directory of Open Access Journals (Sweden)

    Ewa Niewiadomska

    2013-08-01

    Full Text Available Background: The aim of the study is to present the methods for visualization of epidemiological data using digital contour maps that take into account administrative division of Poland. Materials and Methods: The possibility of epidemiological data visualization in a geographical order, limited to the administrative level of the country, voivodeships and poviats (counties, are presented. They are crucial for the process of identifying and undertaking adequate prophylactic activities directed towards decreasing the risk and improving the population's health. This paper presents tools and techniques available in Geographic Information System ArcGIS and statistical software package R. Results: The work includes our own data reflecting: 1 the values of specific mortality rates due to respiratory diseases, Poland, 2010, based on the Central Statistical Office data, using the R statistical software package; 2 the averaged registered incidence rates of sarcoidosis in 2006-2010 for the population aged 19+ in the Silesian voivodeship, using Geographic Information System ArcGIS; and 3 the number of children with diagnosed respiratory diseases in the city of Legnica in 2009, taking into account their place of residence, using layered maps in Geographic Information System ArcGIS. Conclusions: The tools presented and described in this paper make it possible to visualize the results of research, to increase attractiveness of courses for students, as well as to enhance the skills and competence of students and participants of courses. Med Pr 2013;64(4:533–539

  5. GERLUMPH DATA RELEASE 1: HIGH-RESOLUTION COSMOLOGICAL MICROLENSING MAGNIFICATION MAPS AND eResearch TOOLS

    International Nuclear Information System (INIS)

    Vernardos, G.; Fluke, C. J.; Croton, D.; Bate, N. F.

    2014-01-01

    As synoptic all-sky surveys begin to discover new multiply lensed quasars, the flow of data will enable statistical cosmological microlensing studies of sufficient size to constrain quasar accretion disk and supermassive black hole properties. In preparation for this new era, we are undertaking the GPU-Enabled, High Resolution cosmological MicroLensing parameter survey (GERLUMPH). We present here the GERLUMPH Data Release 1, which consists of 12,342 high resolution cosmological microlensing magnification maps and provides the first uniform coverage of the convergence, shear, and smooth matter fraction parameter space. We use these maps to perform a comprehensive numerical investigation of the mass-sheet degeneracy, finding excellent agreement with its predictions. We study the effect of smooth matter on microlensing induced magnification fluctuations. In particular, in the minima and saddle-point regions, fluctuations are enhanced only along the critical line, while in the maxima region they are always enhanced for high smooth matter fractions (≈0.9). We describe our approach to data management, including the use of an SQL database with a Web interface for data access and online analysis, obviating the need for individuals to download large volumes of data. In combination with existing observational databases and online applications, the GERLUMPH archive represents a fundamental component of a new microlensing eResearch cloud. Our maps and tools are publicly available at http://gerlumph.swin.edu.au/

  6. GERLUMPH DATA RELEASE 1: HIGH-RESOLUTION COSMOLOGICAL MICROLENSING MAGNIFICATION MAPS AND eResearch TOOLS

    Energy Technology Data Exchange (ETDEWEB)

    Vernardos, G.; Fluke, C. J.; Croton, D. [Centre for Astrophysics and Supercomputing, Swinburne University of Technology, P.O. Box 218, Hawthorn, Victoria, 3122 (Australia); Bate, N. F. [Sydney Institute for Astronomy, School of Physics, A28, University of Sydney, NSW, 2006 (Australia)

    2014-03-01

    As synoptic all-sky surveys begin to discover new multiply lensed quasars, the flow of data will enable statistical cosmological microlensing studies of sufficient size to constrain quasar accretion disk and supermassive black hole properties. In preparation for this new era, we are undertaking the GPU-Enabled, High Resolution cosmological MicroLensing parameter survey (GERLUMPH). We present here the GERLUMPH Data Release 1, which consists of 12,342 high resolution cosmological microlensing magnification maps and provides the first uniform coverage of the convergence, shear, and smooth matter fraction parameter space. We use these maps to perform a comprehensive numerical investigation of the mass-sheet degeneracy, finding excellent agreement with its predictions. We study the effect of smooth matter on microlensing induced magnification fluctuations. In particular, in the minima and saddle-point regions, fluctuations are enhanced only along the critical line, while in the maxima region they are always enhanced for high smooth matter fractions (≈0.9). We describe our approach to data management, including the use of an SQL database with a Web interface for data access and online analysis, obviating the need for individuals to download large volumes of data. In combination with existing observational databases and online applications, the GERLUMPH archive represents a fundamental component of a new microlensing eResearch cloud. Our maps and tools are publicly available at http://gerlumph.swin.edu.au/.

  7. BAMS: A Tool for Supervised Burned Area Mapping Using Landsat Data

    Directory of Open Access Journals (Sweden)

    Aitor Bastarrika

    2014-12-01

    Full Text Available A new supervised burned area mapping software named BAMS (Burned Area Mapping Software is presented in this paper. The tool was built from standard ArcGISTM libraries. It computes several of the spectral indexes most commonly used in burned area detection and implements a two-phase supervised strategy to map areas burned between two Landsat multitemporal images. The only input required from the user is the visual delimitation of a few burned areas, from which burned perimeters are extracted. After the discrimination of burned patches, the user can visually assess the results, and iteratively select additional sampling burned areas to improve the extent of the burned patches. The final result of the BAMS program is a polygon vector layer containing three categories: (a burned perimeters, (b unburned areas, and (c non-observed areas. The latter refer to clouds or sensor observation errors. Outputs of the BAMS code meet the requirements of file formats and structure of standard validation protocols. This paper presents the tool’s structure and technical basis. The program has been tested in six areas located in the United States, for various ecosystems and land covers, and then compared against the National Monitoring Trends in Burn Severity (MTBS Burned Area Boundaries Dataset.

  8. Predictive tools for designing new insulins and treatment regimens

    DEFF Research Database (Denmark)

    Klim, Søren

    The thesis deals with the development of "Predictive tools for designing new insulins and treatments regimens" and consists of two parts: A model based approach for bridging properties of new insulin analogues from glucose clamp experiments to meal tolerance tests (MTT) and a second part that des......The thesis deals with the development of "Predictive tools for designing new insulins and treatments regimens" and consists of two parts: A model based approach for bridging properties of new insulin analogues from glucose clamp experiments to meal tolerance tests (MTT) and a second part...... that describes an implemented software program able to handle stochastic differential equations (SDEs) with mixed effects. The thesis is supplemented with scientific papers published during the PhD. Developing an insulin analogue from candidate molecule to a clinical drug consists of a development programme...... and efficacy are investigated. Numerous methods are used to quantify dose and efficacy in Phase II - especially of interest is the 24-hour meal tolerance test as it tries to portray near normal living conditions. Part I describes an integrated model for insulin and glucose which is aimed at simulating 24-hour...

  9. Designing appropriate complementary feeding recommendations: tools for programmatic action.

    Science.gov (United States)

    Daelmans, Bernadette; Ferguson, Elaine; Lutter, Chessa K; Singh, Neha; Pachón, Helena; Creed-Kanashiro, Hilary; Woldt, Monica; Mangasaryan, Nuné; Cheung, Edith; Mir, Roger; Pareja, Rossina; Briend, André

    2013-09-01

    Suboptimal complementary feeding practices contribute to a rapid increase in the prevalence of stunting in young children from age 6 months. The design of effective programmes to improve infant and young child feeding requires a sound understanding of the local situation and a systematic process for prioritizing interventions, integrating them into existing delivery platforms and monitoring their implementation and impact. The identification of adequate food-based feeding recommendations that respect locally available foods and address gaps in nutrient availability is particularly challenging. We describe two tools that are now available to strengthen infant and young child-feeding programming at national and subnational levels. ProPAN is a set of research tools that guide users through a step-by-step process for identifying problems related to young child nutrition; defining the context in which these problems occur; formulating, testing, and selecting behaviour-change recommendations and nutritional recipes; developing the interventions to promote them; and designing a monitoring and evaluation system to measure progress towards intervention goals. Optifood is a computer-based platform based on linear programming analysis to develop nutrient-adequate feeding recommendations at lowest cost, based on locally available foods with the addition of fortified products or supplements when needed, or best recommendations when the latter are not available. The tools complement each other and a case study from Peru illustrates how they have been used. The readiness of both instruments will enable partners to invest in capacity development for their use in countries and strengthen programmes to address infant and young child feeding and prevent malnutrition. © 2013 John Wiley & Sons Ltd.

  10. Design and analysis for thematic map accuracy assessment: Fundamental principles

    Science.gov (United States)

    Stephen V. Stehman; Raymond L. Czaplewski

    1998-01-01

    Land-cover maps are used in numerous natural resource applications to describe the spatial distribution and pattern of land-cover, to estimate areal extent of various cover classes, or as input into habitat suitability models, land-cover change analyses, hydrological models, and risk analyses. Accuracy assessment quantifies data quality so that map users may evaluate...

  11. Evidence & Gap Maps: A tool for promoting evidence informed policy and strategic research agendas.

    Science.gov (United States)

    Snilstveit, Birte; Vojtkova, Martina; Bhavsar, Ami; Stevenson, Jennifer; Gaarder, Marie

    2016-11-01

    A range of organizations are engaged in the production of evidence on the effects of health, social, and economic development programs on human welfare outcomes. However, evidence is often scattered around different databases, web sites, and the gray literature and is often presented in inaccessible formats. Lack of overview of the evidence in a specific field can be a barrier to the use of existing research and prevent efficient use of limited resources for new research. Evidence & Gap Maps (EGMs) aim to address these issues and complement existing synthesis and mapping approaches. EGMs are a new addition to the tools available to support evidence-informed policymaking. To provide an accessible resource for researchers, commissioners, and decision makers, EGMs provide thematic collections of evidence structured around a framework which schematically represents the types of interventions and outcomes of relevance to a particular sector. By mapping the existing evidence using this framework, EGMs provide a visual overview of what we know and do not know about the effects of different programs. They make existing evidence available, and by providing links to user-friendly summaries of relevant studies, EGMs can facilitate the use of existing evidence for decision making. They identify key "gaps" where little or no evidence from impact evaluations and systematic reviews is available and can be a valuable resource to inform a strategic approach to building the evidence base in a particular sector. The article will introduce readers to the concept and methods of EGMs and present a demonstration of the EGM tool using existing examples. Copyright © 2016 Elsevier Inc. All rights reserved.

  12. TOWARDS INNOVATIVE GEOSPATIAL TOOLS FOR FIT-FOR-PURPOSE LAND RIGHTS MAPPING

    Directory of Open Access Journals (Sweden)

    M. Koeva

    2017-09-01

    Full Text Available In large parts of sub Saharan Africa it remains an ongoing challenging to map millions of unrecognized land rights. Existing approaches for recognizing these rights have proven inappropriate in many cases. A new generation of tools needs to be developed to support faster, cheaper, easier, and more responsible land rights mapping. This is the main goal of its4land, an European Commission Horizon 2020 project that aims to develop innovative tools inspired by the continuum of land rights, fit-for-purpose land administration, and cadastral intelligence. its4land is using strategic collaboration between the EU and East Africa to deliver innovative, scalable, and transferrable ICT solutions. The innovation process incorporates a broad range of stakeholders and emergent geospatial technologies, including smart sketchmaps, UAVs, automated feature extraction, as well as geocloud services. The aim is to combine innovative technologies, capture the specific needs, market opportunities and readiness of end-users in the domain of land tenure information recording in Eastern Africa. The project consists of a four year work plan, € 3.9M funding, and eight consortium partners collaborating with stakeholders from six case study locations in Ethiopia, Kenya, and Rwanda. The major tasks include tool development, prototyping, and demonstration for local, national, regional, and international interest groups. The case locations cover different land uses such as: urban, peri-urban, rural smallholder, and (former pastoralist. This paper describes the project’s activities within the first 18 months and covers barriers discovered, lessons learned and results achieved.

  13. Quantitative and creative design tools for urban design in cold and windy climates

    DEFF Research Database (Denmark)

    Koss, Holger; Jensen, Lotte Bjerregaard; Nielsen, Thomas Alexander Sick

    2014-01-01

    between the design processes and the academic knowledge available is a focus area. The effects of climate change and a general higher demand for quantitative assessment of urban planning proposals in hard climatic locations have created a demand for research based design advice. The paper will present......In cold and windy climates, the quality of the urban spaces is severely challenged. A design process with a very high level of information regarding wind, sun, daylight and water from the earliest of the design process will help create the most optimized design. For the last couple of years...... in academic ‘silos’ where little attention has been made in regards to architectural design processes. Simulation tools were developed that can render a larger amount of information available in a short time and thus can keep pace with an ongoing design process in an architectural studio. Bridging the gap...

  14. ORION-VIRCAT: a tool for mapping ICTV and NCBI taxonomies.

    Science.gov (United States)

    Valdivia-Granda, Willy; Larson, Francis

    2009-01-01

    Viruses, viroids and prions are the smallest infectious biological entities that depend on their host for replication. The number of pathogenic viruses is considerably large and their impact in human global health is well documented. Currently, the International Committee on the Taxonomy of Viruses (ICTV) has classified approximately 4379 virus species while the National Center for Biotechnology Information Viral Genomes Resource (NCBI-VGR) database has mapped 617 705 proteins to eight large taxonomic groups. Despite these efforts, an automated approach for mapping the ICTV master list and its officially accepted virus naming to the NCBI-VGR's taxonomical classification is not available. Due to metagenomic sequencing, it is likely that the discovery and naming of new viral species will increase by at least ten fold. Unfortunately, existing viral databases are not adequately prepared to scale, maintain and annotate automatically ultra-high throughput sequences and place this information into specific taxonomic categories. ORION-VIRCAT is a scalable and interoperable object-relational database designed to serve as a resource for the integration and verification of taxonomical classifications generated by the ICTV and NCBI-VGR. The current release (v1.0) of ORION-VIRCAT is implemented in PostgreSQL and it has been extended to ORACLE, MySQL and SyBase. ORION-VIRCAT automatically mapped and joined 617 705 entries from the NCBI-VGR to the viral naming of the ICTV. This detailed analysis revealed that 399 095 entries from the NCBI-VGR can be mapped to the ICTV classification and that one Order, 10 families, 35 genera and 503 species listed in the ICTV disagree with the the NCBI-VGR classification schema. Nevertheless, we were eable to correct several discrepancies mapping 234 000 additional entries.Database URL:http://www.orionbiosciences.com/research/orion-vircat.html.

  15. Topographic mapping

    Science.gov (United States)

    ,

    2008-01-01

    The U.S. Geological Survey (USGS) produced its first topographic map in 1879, the same year it was established. Today, more than 100 years and millions of map copies later, topographic mapping is still a central activity for the USGS. The topographic map remains an indispensable tool for government, science, industry, and leisure. Much has changed since early topographers traveled the unsettled West and carefully plotted the first USGS maps by hand. Advances in survey techniques, instrumentation, and design and printing technologies, as well as the use of aerial photography and satellite data, have dramatically improved mapping coverage, accuracy, and efficiency. Yet cartography, the art and science of mapping, may never before have undergone change more profound than today.

  16. Mapping with Drupal

    CERN Document Server

    Palazzolo, Alan

    2011-01-01

    Build beautiful interactive maps on your Drupal website, and tell engaging visual stories with your data. This concise guide shows you how to create custom geographical maps from top to bottom, using Drupal 7 tools and out-of-the-box modules. You'll learn how mapping works in Drupal, with examples on how to use intuitive interfaces to map local events, businesses, groups, and other custom data. Although building maps with Drupal can be tricky, this book helps you navigate the system's complexities for creating sophisticated maps that match your site design. Get the knowledge and tools you ne

  17. Choropleth map legend design for visualizing community health disparities

    Directory of Open Access Journals (Sweden)

    Cromley Ellen K

    2009-09-01

    Full Text Available Abstract Background Disparities in health outcomes across communities are a central concern in public health and epidemiology. Health disparities research often links differences in health outcomes to other social factors like income. Choropleth maps of health outcome rates show the geographical distribution of health outcomes. This paper illustrates the use of cumulative frequency map legends for visualizing how the health events are distributed in relation to social characteristics of community populations. The approach uses two graphs in the cumulative frequency legend to highlight the difference between the raw count of the health events and the raw count of the social characteristic like low income in the geographical areas of the map. The approach is applied to mapping publicly available data on low birth weight by town in Connecticut and Lyme disease incidence by town in Connecticut in relation to income. The steps involved in creating these legends are described in detail so that health analysts can adopt this approach. Results The different health problems, low birth weight and Lyme disease, have different cumulative frequency signatures. Graphing poverty population on the cumulative frequency legends revealed that the poverty population is distributed differently with respect to the two different health problems mapped here. Conclusion Cumulative frequency legends can be useful supplements for choropleth maps. These legends can be constructed using readily available software. They contain all of the information found in standard choropleth map legends, and they can be used with any choropleth map classification scheme. Cumulative frequency legends effectively communicate the proportion of areas, the proportion of health events, and/or the proportion of the denominator population in which the health events occurred that falls within each class interval. They illuminate the context of disease through graphing associations with other

  18. ARCHITECTURAL FORM CREATION IN THE DESIGN STUDIO: PHYSICAL MODELING AS AN EFFECTIVE DESIGN TOOL

    Directory of Open Access Journals (Sweden)

    Wael Abdelhameed

    2011-11-01

    Full Text Available This research paper attempts to shed more light on an area of the design studio, which concerns with the use of physical modeling as a design medium in architectural form creation. An experiment has been carried out during an architectural design studio in order to not only investigate physical modeling as a tool of form creation but also improve visual design thinking that students employ while using this manual tool. To achieve the research objective, a method was proposed and applied to track form creation processes, based upon three types of operation, namely: sketching transformations, divergent physical-modeling transformations, and convergent physical-modeling transformations. The method helps record the innovative transitions of form during conceptual designing in a simple way. Investigating form creation processes and activities associated with visual design thinking enables the research to conclude to general results of the role of physical modeling in the conceptual phase of designing, and to specific results of the methods used in this architectural design studio experiment.

  19. Evaluation and development of an ergonomic complement to the Value Stream Mapping tool

    DEFF Research Database (Denmark)

    Edwards, Kasper

    2009-01-01

    , ergonomic analysis and non-technical dimensions, i.e. the social side of the process. In an international perspective the Nordic countries are presumed to offer the best location for studies on how to integrate work environment issues into process development for improved performance. Our unique roots...... and increasing ergonomic strain leading to more sick days and early retirement. In order to improve sustainability of suggested system solutions resulting from VSM a complementary tool, Ergonova, is now developed. The present planned Nordic investigation aims to evaluate and further develop the Ergonova tool...... for practical use in the Nordic countries. I t is hypothesized that a broader spectrum of suggested solutions will be obtained by using Ergonova and some of these may appear to offer a higher level of sustainability. The overall research design is a comparative study where both the Ergonova and VSM tools...

  20. Assessment and application of national environmental databases and mapping tools at the local level to two community case studies.

    Science.gov (United States)

    Hammond, Davyda; Conlon, Kathryn; Barzyk, Timothy; Chahine, Teresa; Zartarian, Valerie; Schultz, Brad

    2011-03-01

    Communities are concerned over pollution levels and seek methods to systematically identify and prioritize the environmental stressors in their communities. Geographic information system (GIS) maps of environmental information can be useful tools for communities in their assessment of environmental-pollution-related risks. Databases and mapping tools that supply community-level estimates of ambient concentrations of hazardous pollutants, risk, and potential health impacts can provide relevant information for communities to understand, identify, and prioritize potential exposures and risk from multiple sources. An assessment of existing databases and mapping tools was conducted as part of this study to explore the utility of publicly available databases, and three of these databases were selected for use in a community-level GIS mapping application. Queried data from the U.S. EPA's National-Scale Air Toxics Assessment, Air Quality System, and National Emissions Inventory were mapped at the appropriate spatial and temporal resolutions for identifying risks of exposure to air pollutants in two communities. The maps combine monitored and model-simulated pollutant and health risk estimates, along with local survey results, to assist communities with the identification of potential exposure sources and pollution hot spots. Findings from this case study analysis will provide information to advance the development of new tools to assist communities with environmental risk assessments and hazard prioritization. © 2010 Society for Risk Analysis.

  1. An evaluation tool for Myofascial Adhesions in Patients after Breast Cancer (MAP-BC evaluation tool): Concurrent, face and content validity.

    Science.gov (United States)

    De Groef, An; Van Kampen, Marijke; Moortgat, Peter; Anthonissen, Mieke; Van den Kerckhove, Eric; Christiaens, Marie-Rose; Neven, Patrick; Geraerts, Inge; Devoogdt, Nele

    2018-01-01

    To investigate the concurrent, face and content validity of an evaluation tool for Myofascial Adhesions in Patients after Breast Cancer (MAP-BC evaluation tool). 1) Concurrent validity of the MAP-BC evaluation tool was investigated by exploring correlations (Spearman's rank Correlation Coefficient) between the subjective scores (0 -no adhesions to 3 -very strong adhesions) of the skin level using the MAP-BC evaluation tool and objective elasticity parameters (maximal skin extension and gross elasticity) generated by the Cutometer Dual MPA 580. Nine different examination points on and around the mastectomy scar were evaluated. 2) Face and content validity were explored by questioning therapists experienced with myofascial therapy in breast cancer patients about the comprehensibility and comprehensiveness of the MAP-BC evaluation tool. 1) Only three meaningful correlations were found on the mastectomy scar. For the most lateral examination point on the mastectomy scar a moderate negative correlation (-0.44, p = 0.01) with the maximal skin extension and a moderate positive correlation with the resistance versus ability of returning or 'gross elasticity' (0.42, p = 0.02) were found. For the middle point on the mastectomy scar an almost moderate positive correlation with gross elasticity was found as well (0.38, p = 0.04) 2) Content and face validity have been found to be good. Eighty-nine percent of the respondent found the instructions understandable and 98% found the scoring system obvious. Thirty-seven percent of the therapists suggested to add the possibility to evaluate additional anatomical locations in case of reconstructive and/or bilateral surgery. The MAP-BC evaluation tool for myofascial adhesions in breast cancer patients has good face and content validity. Evidence for good concurrent validity of the skin level was found only on the mastectomy scar itself.

  2. REALIZING BUSINESS PROCESS MANAGEMENT BY HELP OF A PROCESS MAPPING DATABASE TOOL

    CERN Document Server

    Vergili, Ceren

    2016-01-01

    In a typical business sector, processes are the building blocks of the achievement. A considerable percentage of the processes are consisting of business processes. This fact is bringing the fact that business sectors are in need of a management discipline. Business Process Management (BPM) is a discipline that combines modelling, automation, execution, control, measurement, and optimization of process by considering enterprise goals, spanning systems, employees, customers, and partners. CERN’s EN – HE – HM section desires to apply the BPM discipline appropriately for improving their necessary technical, administrative and managerial actions to supply appropriate CERN industrial transport, handling and lifting equipment and to maintain it. For this reason, a Process Mapping Database Tool is created to develop a common understanding about how the section members can visualize their processes, agree on quality standards and on how to improve. It provides a management support by establishing Process Charts...

  3. Testing of Alignment Parameters for Ancient Samples: Evaluating and Optimizing Mapping Parameters for Ancient Samples Using the TAPAS Tool

    Directory of Open Access Journals (Sweden)

    Ulrike H. Taron

    2018-03-01

    Full Text Available High-throughput sequence data retrieved from ancient or other degraded samples has led to unprecedented insights into the evolutionary history of many species, but the analysis of such sequences also poses specific computational challenges. The most commonly used approach involves mapping sequence reads to a reference genome. However, this process becomes increasingly challenging with an elevated genetic distance between target and reference or with the presence of contaminant sequences with high sequence similarity to the target species. The evaluation and testing of mapping efficiency and stringency are thus paramount for the reliable identification and analysis of ancient sequences. In this paper, we present ‘TAPAS’, (Testing of Alignment Parameters for Ancient Samples, a computational tool that enables the systematic testing of mapping tools for ancient data by simulating sequence data reflecting the properties of an ancient dataset and performing test runs using the mapping software and parameter settings of interest. We showcase TAPAS by using it to assess and improve mapping strategy for a degraded sample from a banded linsang (Prionodon linsang, for which no closely related reference is currently available. This enables a 1.8-fold increase of the number of mapped reads without sacrificing mapping specificity. The increase of mapped reads effectively reduces the need for additional sequencing, thus making more economical use of time, resources, and sample material.

  4. From FUELCON to FUELGEN: tools for fuel reload pattern design

    International Nuclear Information System (INIS)

    Nissan, E.; Zhao, J.; Knight, B.; Soper, A.; Galperin, A.

    2000-01-01

    FUELGEN is an effective tool for refuelling design, i.e., for solving the incore fuel management problem at nuclear power plants. Devising good fuel allocations for reloading the core of a given nuclear reactor, for a given operation cycle, is crucial for keeping down operation costs at plants. Fuel comes in different types, and is positioned in a grid representing the core of a reactor. The starting point was Galperin and Nissan's prototype which eventually led to FUELCON, a rule-based expert system with the same task. FUELGEN, instead, is based on a genetic algorithm for optimization, and is at the current forefront of research in refuelling design, where genetic techniques are now getting increasing recognition. The end result of over a decade of research within this sequence of projects yielded a set of alternative, partly overlapping architectures. Nodal algorithms to carry out parameter prediction by simulation, heuristic rules in FUELCON's ruleset and metal-level refinement ergonomic techniques by which the ruleset can be refined during a session with FUELCON, attempts with neural computation on top of the latter, and then, replacing the ruleset altogether by resorting to genetic algorithms, are the sequence of techniques that were in turn applied, in the development of FUELCON and the FUELGEN. This actually reflects the sequence of emergence of expert systems and then neural computation methods, then genetic and hybrid methods, in knowledge engineering in general and in its application to nuclear engineering in particular. (orig.)

  5. Performance Evaluation of a Software Engineering Tool for Automated Design of Cooling Systems in Injection Moulding

    DEFF Research Database (Denmark)

    Jauregui-Becker, Juan M.; Tosello, Guido; van Houten, Fred J.A.M.

    2013-01-01

    This paper presents a software tool for automating the design of cooling systems for injection moulding and a validation of its performance. Cooling system designs were automatically generated by the proposed software tool and by applying a best practice tool engineering design approach. The two...

  6. AthaMap web tools for the analysis of transcriptional and posttranscriptional regulation of gene expression in Arabidopsis thaliana.

    Science.gov (United States)

    Hehl, Reinhard; Bülow, Lorenz

    2014-01-01

    The AthaMap database provides a map of verified and predicted transcription factor (TF) and small RNA-binding sites for the A. thaliana genome. The database can be used for bioinformatic predictions of putative regulatory sites. Several online web tools are available that address specific questions. Starting with the identification of transcription factor-binding sites (TFBS) in any gene of interest, colocalizing TFBS can be identified as well as common TFBS in a set of user-provided genes. Furthermore, genes can be identified that are potentially targeted by specific transcription factors or small inhibitory RNAs. This chapter provides detailed information on how each AthaMap web tool can be used online. Examples on how this database is used to address questions in circadian and diurnal regulation are given. Furthermore, complementary databases and databases that go beyond questions addressed with AthaMap are discussed.

  7. IMPACT OF SCHEMATIC DESIGNS ON THE COGNITION OF UNDERGROUND TUBE MAPS

    Directory of Open Access Journals (Sweden)

    Z. Liu

    2016-06-01

    Full Text Available Schematic maps have been popularly employed to represent transport networks, particularly underground tube lines (or metro lines, since its adoption by the Official London Underground in early 1930s. Such maps employ straightened lines along horizontal, vertical and diagonal directions. Recently, some researchers started to argue that the distortion in such a schematization may cause big distortion and some new designs are proposed. This project aims to make a comparative analysis of such a schematic design with a new design proposed by Mark Noad in 2011, which makes use of lines along 30º and 60º directions instead of the 45º direction. Tasks have been designed for evaluating the effect of schematic designs on route planning by travellers. The participant was asked to choose the route s/he would take among two or three possible route options and then read the name of the selected transfer station. Eye-tracking technique has been employed to track the map recognition process. Total travel time is used as criterion for effectiveness; completion time and mental work cost are used for efficiency evaluation. It has been found that (1 the design of map style has significant impact on users’ travel decision making, especially map distance and transfer station symbol designs, and (2 the design style of a schematic map will have great impact on the effectiveness and efficiency of map recognition.

  8. An interactive program for computer-aided map design, display, and query: EMAPKGS2

    Science.gov (United States)

    Pouch, G.W.

    1997-01-01

    EMAPKGS2 is a user-friendly, PC-based electronic mapping tool for use in hydrogeologic exploration and appraisal. EMAPKGS2 allows the analyst to construct maps interactively from data stored in a relational database, perform point-oriented spatial queries such as locating all wells within a specified radius, perform geographic overlays, and export the data to other programs for further analysis. EMAPKGS2 runs under Microsoft?? Windows??? 3.1 and compatible operating systems. EMAPKGS2 is a public domain program available from the Kansas Geological Survey. EMAPKGS2 is the centerpiece of WHEAT, the Windows-based Hydrogeologic Exploration and Appraisal Toolkit, a suite of user-friendly Microsoft?? Windows??? programs for natural resource exploration and management. The principal goals in development of WHEAT have been ease of use, hardware independence, low cost, and end-user extensibility. WHEAT'S native data format is a Microsoft?? Access?? database. WHEAT stores a feature's geographic coordinates as attributes so they can be accessed easily by the user. The WHEAT programs are designed to be used in conjunction with other Microsoft?? Windows??? software to allow the natural resource scientist to perform work easily and effectively. WHEAT and EMAPKGS have been used at several of Kansas' Groundwater Management Districts and the Kansas Geological Survey on groundwater management operations, groundwater modeling projects, and geologic exploration projects. ?? 1997 Elsevier Science Ltd.

  9. Soundscape design guidelines through noise mapping methodologies: An application to medium urban agglomerations

    Directory of Open Access Journals (Sweden)

    Vogiatzis Konstantinos

    2017-03-01

    Full Text Available In the framework of the European Directive 2002/49/EC, from 2012 to 2016, several cities in Greece have completed noise strategic maps with noise action plans that usually define the main strategies to reduce the noise residents are exposed to and introduce and preserve “quiet zones”. Several medium urban agglomerations in Greece (Volos, Larissa, Chania, Heraklion, Corfu, Agrinio, Thessaloniki have been chosen to also analyse the sound qualities of the soundscapes of specific urban neighbourhoods in order to generate recommendations for the urban design of the soundscapes of these agglomerations in a manner that complements conventional noise mitigation measures. The general principle of this approach is to relate quantitative data (e.g., from measurements, acoustic simulations, urban forms, topography, and traffic model with qualitative data (e.g., from type of sources, interviews, reports on environmental noise perception by creating quantitative and qualitative maps. The aim of this study is to propose possible action tools to the relevant authorities aiming at diminishing noise levels in affected areas and also to provide solutions towards a sustainable sound environment both in space and time. This paper presents the main current methodology, selected important results proposed for the urban agglomerations of a typical Southeast Mediterranean country such as Greece.

  10. Design tool for offgrid hydrogen refuelling systems for aerospace applications

    International Nuclear Information System (INIS)

    Troncoso, E.; Lapeña-Rey, N.; Gonzalez, M.

    2016-01-01

    Highlights: • A simulation tool for offgrid CPV-based hydrogen refuelling systems is presented. • Simulations of system configurations with specific UAS hydrogen demand scenarios. • Regarding system size & reliability the most critical components are the CPV array and batteries. • In terms of energy efficiency the most critical component is the electrolyser. - Abstract: To develop an environmentally acceptable refuelling solution for fuel cell-powered unmanned aerial systems (UASs) to operate in remote areas, hydrogen fuel must be produced on-site from renewable energy sources. This paper describes a Matlab-based simulation tool specifically developed to pre-design offgrid hydrogen refuelling systems for UAS applications. The refuelling system comprises a high concentrated PV array (CPV), an electrolyser, a hydrogen buffer tank and a diaphragm hydrogen compressor. Small composite tanks are also included for fast refuelling of the UAV platforms at any time during the year. The novel approach of selecting a CPV power source is justified on the basis of minimizing the system footprint (versus flat plat or low concentration PV), aiming for a containerized remotely deployable UAS offgrid refuelling solution. To validate the simulation tool a number of simulations were performed using experimental data from a prototype offgrid hydrogen refuelling station for UAVs developed by Boeing Research & Technology Europe. Solar irradiation data for a selected location and daily UAS hydrogen demands of between 2.8 and 15.8 Nm"3 were employed as the primary inputs, in order to calculate a recommended system sizing solution and assess the expected operation of the refuelling system across a given year. The specific energy consumption of the refuelling system obtained from the simulations is between 5.6 and 8.9 kW h_e per kg of hydrogen delivered to the UAVs, being lower for larger daily hydrogen demands. Increasing the CPV area and electrolyser size in order to supply higher

  11. Autonomic Differentiation Map: A Novel Statistical Tool for Interpretation of Heart Rate Variability

    Directory of Open Access Journals (Sweden)

    Daniela Lucini

    2018-04-01

    Full Text Available In spite of the large body of evidence suggesting Heart Rate Variability (HRV alone or combined with blood pressure variability (providing an estimate of baroreflex gain as a useful technique to assess the autonomic regulation of the cardiovascular system, there is still an ongoing debate about methodology, interpretation, and clinical applications. In the present investigation, we hypothesize that non-parametric and multivariate exploratory statistical manipulation of HRV data could provide a novel informational tool useful to differentiate normal controls from clinical groups, such as athletes, or subjects affected by obesity, hypertension, or stress. With a data-driven protocol in 1,352 ambulant subjects, we compute HRV and baroreflex indices from short-term data series as proxies of autonomic (ANS regulation. We apply a three-step statistical procedure, by first removing age and gender effects. Subsequently, by factor analysis, we extract four ANS latent domains that detain the large majority of information (86.94%, subdivided in oscillatory (40.84%, amplitude (18.04%, pressure (16.48%, and pulse domains (11.58%. Finally, we test the overall capacity to differentiate clinical groups vs. control. To give more practical value and improve readability, statistical results concerning individual discriminant ANS proxies and ANS differentiation profiles are displayed through peculiar graphical tools, i.e., significance diagram and ANS differentiation map, respectively. This approach, which simultaneously uses all available information about the system, shows what domains make up the difference in ANS discrimination. e.g., athletes differ from controls in all domains, but with a graded strength: maximal in the (normalized oscillatory and in the pulse domains, slightly less in the pressure domain and minimal in the amplitude domain. The application of multiple (non-parametric and exploratory statistical and graphical tools to ANS proxies defines

  12. A Thermoelastic Hydraulic Fracture Design Tool for Geothermal Reservoir Development

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad Ghassemi

    2003-06-30

    Geothermal energy is recovered by circulating water through heat exchange areas within a hot rock mass. Geothermal reservoir rock masses generally consist of igneous and metamorphic rocks that have low matrix permeability. Therefore, cracks and fractures play a significant role in extraction of geothermal energy by providing the major pathways for fluid flow and heat exchange. Thus, knowledge of conditions leading to formation of fractures and fracture networks is of paramount importance. Furthermore, in the absence of natural fractures or adequate connectivity, artificial fracture are created in the reservoir using hydraulic fracturing. At times, the practice aims to create a number of parallel fractures connecting a pair of wells. Multiple fractures are preferred because of the large size necessary when using only a single fracture. Although the basic idea is rather simple, hydraulic fracturing is a complex process involving interactions of high pressure fluid injections with a stressed hot rock mass, mechanical interaction of induced fractures with existing natural fractures, and the spatial and temporal variations of in-situ stress. As a result it is necessary to develop tools that can be used to study these interactions as an integral part of a comprehensive approach to geothermal reservoir development, particularly enhanced geothermal systems. In response to this need we have set out to develop advanced thermo-mechanical models for design of artificial fractures and rock fracture research in geothermal reservoirs. These models consider the significant hydraulic and thermo-mechanical processes and their interaction with the in-situ stress state. Wellbore failure and fracture initiation is studied using a model that fully couples poro-mechanical and thermo-mechanical effects. The fracture propagation model is based on a complex variable and regular displacement discontinuity formulations. In the complex variable approach the displacement discontinuities are

  13. Formalization of treatment guidelines using Fuzzy Cognitive Maps and semantic web tools.

    Science.gov (United States)

    Papageorgiou, Elpiniki I; Roo, Jos De; Huszka, Csaba; Colaert, Dirk

    2012-02-01

    Therapy decision making and support in medicine deals with uncertainty and needs to take into account the patient's clinical parameters, the context of illness and the medical knowledge of the physician and guidelines to recommend a treatment therapy. This research study is focused on the formalization of medical knowledge using a cognitive process, called Fuzzy Cognitive Maps (FCMs) and semantic web approach. The FCM technique is capable of dealing with situations including uncertain descriptions using similar procedure such as human reasoning does. Thus, it was selected for the case of modeling and knowledge integration of clinical practice guidelines. The semantic web tools were established to implement the FCM approach. The knowledge base was constructed from the clinical guidelines as the form of if-then fuzzy rules. These fuzzy rules were transferred to FCM modeling technique and, through the semantic web tools, the whole formalization was accomplished. The problem of urinary tract infection (UTI) in adult community was examined for the proposed approach. Forty-seven clinical concepts and eight therapy concepts were identified for the antibiotic treatment therapy problem of UTIs. A preliminary pilot-evaluation study with 55 patient cases showed interesting findings; 91% of the antibiotic treatments proposed by the implemented approach were in fully agreement with the guidelines and physicians' opinions. The results have shown that the suggested approach formalizes medical knowledge efficiently and gives a front-end decision on antibiotics' suggestion for cystitis. Concluding, modeling medical knowledge/therapeutic guidelines using cognitive methods and web semantic tools is both reliable and useful. Copyright © 2011 Elsevier Inc. All rights reserved.

  14. Delineating Beach and Dune Morphology from Massive Terrestrial Laser Scanning Data Using the Generic Mapping Tools

    Science.gov (United States)

    Zhou, X.; Wang, G.; Yan, B.; Kearns, T.

    2016-12-01

    Terrestrial laser scanning (TLS) techniques have been proven to be efficient tools to collect three-dimensional high-density and high-accuracy point clouds for coastal research and resource management. However, the processing and presenting of massive TLS data is always a challenge for research when targeting a large area with high-resolution. This article introduces a workflow using shell-scripting techniques to chain together tools from the Generic Mapping Tools (GMT), Geographic Resources Analysis Support System (GRASS), and other command-based open-source utilities for automating TLS data processing. TLS point clouds acquired in the beach and dune area near Freeport, Texas in May 2015 were used for the case study. Shell scripts for rotating the coordinate system, removing anomalous points, assessing data quality, generating high-accuracy bare-earth DEMs, and quantifying beach and sand dune features (shoreline, cross-dune section, dune ridge, toe, and volume) are presented in this article. According to this investigation, the accuracy of the laser measurements (distance from the scanner to the targets) is within a couple of centimeters. However, the positional accuracy of TLS points with respect to a global coordinate system is about 5 cm, which is dominated by the accuracy of GPS solutions for obtaining the positions of the scanner and reflector. The accuracy of TLS-derived bare-earth DEM is primarily determined by the size of grid cells and roughness of the terrain surface for the case study. A DEM with grid cells of 4m x 1m (shoreline by cross-shore) provides a suitable spatial resolution and accuracy for deriving major beach and dune features.

  15. Methodology to design a municipal solid waste generation and composition map: A case study

    International Nuclear Information System (INIS)

    Gallardo, A.; Carlos, M.; Peris, M.; Colomer, F.J.

    2014-01-01

    Highlights: • To draw a waste generation and composition map of a town a lot of factors must be taken into account. • The methodology proposed offers two different depending on the available data combined with geographical information systems. • The methodology has been applied to a Spanish city with success. • The methodology will be a useful tool to organize the municipal solid waste management. - Abstract: The municipal solid waste (MSW) management is an important task that local governments as well as private companies must take into account to protect human health, the environment and to preserve natural resources. To design an adequate MSW management plan the first step consist in defining the waste generation and composition patterns of the town. As these patterns depend on several socio-economic factors it is advisable to organize them previously. Moreover, the waste generation and composition patterns may vary around the town and over the time. Generally, the data are not homogeneous around the city as the number of inhabitants is not constant nor it is the economic activity. Therefore, if all the information is showed in thematic maps, the final waste management decisions can be made more efficiently. The main aim of this paper is to present a structured methodology that allows local authorities or private companies who deal with MSW to design its own MSW management plan depending on the available data. According to these data, this paper proposes two ways of action: a direct way when detailed data are available and an indirect way when there is a lack of data and it is necessary to take into account bibliographic data. In any case, the amount of information needed is considerable. This paper combines the planning methodology with the Geographic Information Systems to present the final results in thematic maps that make easier to interpret them. The proposed methodology is a previous useful tool to organize the MSW collection routes including the

  16. US EPA Office of Research and Development Community-Focused Exposure and Risk Screening Tool (C-FERST) Air Pollutants 2011 web mapping service

    Data.gov (United States)

    U.S. Environmental Protection Agency — This map service displays all air-related layers used in the USEPA Community/Tribal-Focused Exposure and Risk Screening Tool (C/T-FERST) mapping application...

  17. US EPA Office of Research and Development Community-Focused Exposure and Risk Screening Tool (C-FERST) Air web mapping service

    Data.gov (United States)

    U.S. Environmental Protection Agency — This map service displays all air-related layers used in the USEPA Community/Tribal-Focused Exposure and Risk Screening Tool (C/T-FERST) mapping application...

  18. A Java-based tool for the design of classification microarrays.

    Science.gov (United States)

    Meng, Da; Broschat, Shira L; Call, Douglas R

    2008-08-04

    Classification microarrays are used for purposes such as identifying strains of bacteria and determining genetic relationships to understand the epidemiology of an infectious disease. For these cases, mixed microarrays, which are composed of DNA from more than one organism, are more effective than conventional microarrays composed of DNA from a single organism. Selection of probes is a key factor in designing successful mixed microarrays because redundant sequences are inefficient and limited representation of diversity can restrict application of the microarray. We have developed a Java-based software tool, called PLASMID, for use in selecting the minimum set of probe sequences needed to classify different groups of plasmids or bacteria. The software program was successfully applied to several different sets of data. The utility of PLASMID was illustrated using existing mixed-plasmid microarray data as well as data from a virtual mixed-genome microarray constructed from different strains of Streptococcus. Moreover, use of data from expression microarray experiments demonstrated the generality of PLASMID. In this paper we describe a new software tool for selecting a set of probes for a classification microarray. While the tool was developed for the design of mixed microarrays-and mixed-plasmid microarrays in particular-it can also be used to design expression arrays. The user can choose from several clustering methods (including hierarchical, non-hierarchical, and a model-based genetic algorithm), several probe ranking methods, and several different display methods. A novel approach is used for probe redundancy reduction, and probe selection is accomplished via stepwise discriminant analysis. Data can be entered in different formats (including Excel and comma-delimited text), and dendrogram, heat map, and scatter plot images can be saved in several different formats (including jpeg and tiff). Weights generated using stepwise discriminant analysis can be stored for

  19. Analytical Modeling Tool for Design of Hydrocarbon Sensitive Optical Fibers

    Directory of Open Access Journals (Sweden)

    Khalil Al Handawi

    2017-09-01

    Full Text Available Pipelines are the main transportation means for oil and gas products across large distances. Due to the severe conditions they operate in, they are regularly inspected using conventional Pipeline Inspection Gages (PIGs for corrosion damage. The motivation for researching a real-time distributed monitoring solution arose to mitigate costs and provide a proactive indication of potential failures. Fiber optic sensors with polymer claddings provide a means of detecting contact with hydrocarbons. By coating the fibers with a layer of metal similar in composition to that of the parent pipeline, corrosion of this coating may be detected when the polymer cladding underneath is exposed to the surrounding hydrocarbons contained within the pipeline. A Refractive Index (RI change occurs in the polymer cladding causing a loss in intensity of a traveling light pulse due to a reduction in the fiber’s modal capacity. Intensity losses may be detected using Optical Time Domain Reflectometry (OTDR while pinpointing the spatial location of the contact via time delay calculations of the back-scattered pulses. This work presents a theoretical model for the above sensing solution to provide a design tool for the fiber optic cable in the context of hydrocarbon sensing following corrosion of an external metal coating. Results are verified against the experimental data published in the literature.

  20. Analytical Modeling Tool for Design of Hydrocarbon Sensitive Optical Fibers.

    Science.gov (United States)

    Al Handawi, Khalil; Vahdati, Nader; Shiryayev, Oleg; Lawand, Lydia

    2017-09-28

    Pipelines are the main transportation means for oil and gas products across large distances. Due to the severe conditions they operate in, they are regularly inspected using conventional Pipeline Inspection Gages (PIGs) for corrosion damage. The motivation for researching a real-time distributed monitoring solution arose to mitigate costs and provide a proactive indication of potential failures. Fiber optic sensors with polymer claddings provide a means of detecting contact with hydrocarbons. By coating the fibers with a layer of metal similar in composition to that of the parent pipeline, corrosion of this coating may be detected when the polymer cladding underneath is exposed to the surrounding hydrocarbons contained within the pipeline. A Refractive Index (RI) change occurs in the polymer cladding causing a loss in intensity of a traveling light pulse due to a reduction in the fiber's modal capacity. Intensity losses may be detected using Optical Time Domain Reflectometry (OTDR) while pinpointing the spatial location of the contact via time delay calculations of the back-scattered pulses. This work presents a theoretical model for the above sensing solution to provide a design tool for the fiber optic cable in the context of hydrocarbon sensing following corrosion of an external metal coating. Results are verified against the experimental data published in the literature.

  1. Tools for Real-Time Control Systems Co-Design - A Survey

    OpenAIRE

    Henriksson, Dan; El-Khoury, Jad; Årzén, Karl-Erik; Törngren, Martin; Redell, Ola

    2005-01-01

    This report presents a survey of current simulation tools in the area of integrated control and real-time systems design. Each tool is presented with a quick overview followed by a more detailed section describing comparative aspects of the tool. These aspects describe the context and purpose of the tool (scenarios, development stages, activities, and qualities/constraints being addressed) and the actual tool technology (tool architecture, inputs, outputs, modeling content, extensibility and ...

  2. Mapping Application for Penguin Populations and Projected Dynamics (MAPPPD): Data and Tools for Dynamic Management and Decision Support

    Science.gov (United States)

    Humphries, G. R. W.; Naveen, R.; Schwaller, M.; Che-Castaldo, C.; McDowall, P.; Schrimpf, M.; Schrimpf, Michael; Lynch, H. J.

    2017-01-01

    The Mapping Application for Penguin Populations and Projected Dynamics (MAPPPD) is a web-based, open access, decision-support tool designed to assist scientists, non-governmental organizations and policy-makers working to meet the management objectives as set forth by the Commission for the Conservation of Antarctic Marine Living Resources (CCAMLR) and other components of the Antarctic Treaty System (ATS) (that is, Consultative Meetings and the ATS Committee on Environmental Protection). MAPPPD was designed specifically to complement existing efforts such as the CCAMLR Ecosystem Monitoring Program (CEMP) and the ATS site guidelines for visitors. The database underlying MAPPPD includes all publicly available (published and unpublished) count data on emperor, gentoo, Adelie) and chinstrap penguins in Antarctica. Penguin population models are used to assimilate available data into estimates of abundance for each site and year.Results are easily aggregated across multiple sites to obtain abundance estimates over any user-defined area of interest. A front end web interface located at www.penguinmap.com provides free and ready access to the most recent count and modelled data, and can act as a facilitator for data transfer between scientists and Antarctic stakeholders to help inform management decisions for the continent.

  3. Design and development of linked data from the National Map

    Science.gov (United States)

    Usery, E. Lynn; Varanka, Dalia E.

    2012-01-01

    The development of linked data on the World-Wide Web provides the opportunity for the U.S. Geological Survey (USGS) to supply its extensive volumes of geospatial data, information, and knowledge in a machine interpretable form and reach users and applications that heretofore have been unavailable. To pilot a process to take advantage of this opportunity, the USGS is developing an ontology for The National Map and converting selected data from nine research test areas to a Semantic Web format to support machine processing and linked data access. In a case study, the USGS has developed initial methods for legacy vector and raster formatted geometry, attributes, and spatial relationships to be accessed in a linked data environment maintaining the capability to generate graphic or image output from semantic queries. The description of an initial USGS approach to developing ontology, linked data, and initial query capability from The National Map databases is presented.

  4. Keep IT Real : On Tools, Emotion, Cognition and Intentionality in Design

    NARCIS (Netherlands)

    Wendrich, R. E.; Kruiper, R.; Marjanović, D.; M., Štorga; Pavković, N.; Bojčetić, N.; Škec, S.

    2016-01-01

    Keep IT real, create, build, and develop design tools that support designers during the early phases of design processing. This paper investigates how, and whether, current technology can afford real-time interaction and affective computing in a HDT(E) design tool that integrates and blends

  5. Landslide inventory map as a tool for landscape planning and management in Buzau Land Geopark

    Science.gov (United States)

    Tatu, Mihai; Niculae, Lucica; Popa, Răzvan-Gabriel

    2015-04-01

    Buzău Land is an aspiring Geopark in Romania, located in the mountainous region of the southern part of the Carpathian Bend Area. From a geologic point of view, the East Carpathians represent a segment of the Alpine - Carpathian orogene, and they are composed of numerous tectonic units put up throughout the Mesozoic and Cenozoic orogenesis. They represent a result of two compressional phases, (1) during Late Cretaceous and (2) during Early and Middle Miocene that were responsible for thrusting of internal units onto external units. The latter cover tectonically the Foredeep folded deposits. Landslides are one of the most widespread and dangerous natural hazards in this region, disrupting access routes and damaging property and habitats at least twice per year, in the rainy seasons. This hazard induces deep changes in the landscape and has serious economic consequences related to the damaging of infrastructure and isolation of localities. The proximity to the Vrancea seismogenic zone increases the risk of landslide triggering. A first step in observing the space and time tendency and amplitude of landslides, in order to distinguish the main vulnerabilities and estimate the risk, is to produce an inventory map. We shall present a landslide inventory map for the Buzău Land territory (~1036 km2), which is the primary base of information for further discussions regarding this phenomenon and an essential tool in observing the development of mass-wasting processes and in landscape planning. The inventory map is in accordance with the recommendations of the IAEG Commission on Landslides and other Mass-Movement, applied across the EU. Based on this work, we can already draw some remarks: - The Geopark territory mostly covers two major tectonic units of the East Carpathians: the external nappes and the folded foredeep; areas with landslide potential are common, but by far the highest landslide frequency is observed in the foredeep. This is related to the soft, argillaceous

  6. Interactive tool that empowers structural understanding and enables FEM analysis in a parametric design environment

    DEFF Research Database (Denmark)

    Christensen, Jesper Thøger; Parigi, Dario; Kirkegaard, Poul Henning

    2014-01-01

    This paper introduces an interactive tool developed to integrate structural analysis in the architectural design environment from the early conceptual design stage. The tool improves exchange of data between the design environment of Rhino Grasshopper and the FEM analysis of Autodesk Robot...... Structural Analysis. Further the tool provides intuitive setup and visual aids in order to facilitate the process. Enabling students and professionals to quickly analyze and evaluate multiple design variations. The tool has been developed inside the Performance Aided Design course at the Master...... of Architecture and Design at Aalborg University...

  7. Effectiveness of mind mapping as a learning tool among dental students

    Directory of Open Access Journals (Sweden)

    Mohnish Muchhal

    2018-01-01

    Full Text Available Introduction: The foremost goal of our education system is to develop the students' skills to reach information rather than transferring the present information. Instead of understanding and applying the concepts (meaningful learning, students used to memorize the facts. Therefore, long-term independent learning process is required for the students. Aim: This study aims to evaluate the effectiveness of mind mapping as a learning tool and to assess its information retrieval potential among dental students over conventional system of learning. Materials and Methods: An interventional study was conducted among 90 students of BDS 3rd year students. A questionnaire consisting of questions related to oral hygiene index (OHI and OHI-simplified (OHI-S was distributed to them. Data were analyzed using Statistical Package for Social Sciences (SPSS 18.0 (SPSS Inc., Chicago, IL, USA and descriptive and analytical tests including mean, standard deviation, and Chi-square test. Results: Of the 90 students, only 82 students responded to the questionnaire generating a response rate of 89.5%. The mean score of students in the mind map (MM group was significantly higher than the conventional group (posttest – 13.60 ± 0.99 vs 8.73 ± 2.13, P = 0.001. Gain in knowledge score was 7.74 vs. 3.43; statistically significant difference was found between the two groups for the gain in knowledge score as well as in mean percentage gain in knowledge score. Conclusion: Specific and prudent thinking with self-efficacy should be the purpose of education system rather than making the students literate only. This requires shifting of traditional teaching method with innovative method, and MM is one of the innovative as well as attractive processes of teaching which further help the students to learn the subject more effectively in a creative way.

  8. Mapping the Journey: Visualising Collaborative Experiences for Sustainable Design Education

    Science.gov (United States)

    McMahon, Muireann; Bhamra, Tracy

    2017-01-01

    The paradigm of design is changing. Designers now need to be equipped with the skills and knowledge that will enable them to participate in the global move towards a sustainable future. The challenges arise as Design for Sustainability deals with very complex and often contradictory issues. Collaborative learning experiences recognise that these…

  9. E-Learning Content Design Standards Based on Interactive Digital Concepts Maps in the Light of Meaningful and Constructivist Learning Theory

    Science.gov (United States)

    Afify, Mohammed Kamal

    2018-01-01

    The present study aims to identify standards of interactive digital concepts maps design and their measurement indicators as a tool to develop, organize and administer e-learning content in the light of Meaningful Learning Theory and Constructivist Learning Theory. To achieve the objective of the research, the author prepared a list of E-learning…

  10. Design of Friction Stir Welding Tool for Avoiding Root Flaws.

    Science.gov (United States)

    Ji, Shude; Xing, Jingwei; Yue, Yumei; Ma, Yinan; Zhang, Liguo; Gao, Shuangsheng

    2013-12-12

    In order to improve material flow behavior during friction stir welding and avoid root flaws of weld, a tool with a half-screw pin and a tool with a tapered-flute pin are suggested. The effect of flute geometry in tool pins on material flow velocity is investigated by the software ANSYS FLUENT. Numerical simulation results show that high material flow velocity appears near the rotational tool and material flow velocity rapidly decreases with the increase of distance away from the axis of the tool. Maximum material flow velocity by the tool with the tapered-flute pin appears at the beginning position of flute and the velocity decreases with the increase of flow length in flute. From the view of increasing the flow velocity of material near the bottom of the workpiece or in the middle of workpiece, the tool with the half-screw pin and the tool with the tapered-flute pin are both better than the conventional tool.

  11. Air Division Mapping Application NAAQS Designations Map Service, Region 9, 2015, US EPA Region 9

    Data.gov (United States)

    U.S. Environmental Protection Agency — Designated Areas - as of October 1, 2015. A designation is the term EPA uses to describe the air quality in a given area for any of six common air pollutants known...

  12. The Concept Maps as a Didactic Resource Tool of Meaningful Learning in Astronomy Themes

    Science.gov (United States)

    Silveira, Felipa Pacífico Ribeiro de Assis; Mendonça, Conceição Aparecida Soares

    2015-07-01

    This article presents the results of an investigation that sought to understand the performance of the conceptual map (MC) as a teaching resource facilitator of meaningful learning of scientific concepts on astronomical themes, developed with elementary school students. The methodology employed to obtain and process the data was based on a quantitative and qualitative approach. On the quantitative level we designed a quasi-experimental research with a control group that did not use the MC and an experimental group that used the MC, both being evaluated in the beginning and end of the process. In this case, the performance of both groups is displayed in a descriptive and analytical study. In the qualitative approach, the MCs were interpreted using the structuring and assigned meanings shared by the student during his/her presentation. The results demonstrated through the improvement of qualifications that the MC made a difference in conceptual learning and in certain skills revealed by learning indicators.

  13. SCALES : A System Level Tool for Conceptual Design of Nano- and Microsatellites

    NARCIS (Netherlands)

    Aas, C.; Zandbergen, B.T.C.; Hamann, R.J.; Gill, E.K.A.

    2009-01-01

    A satellite design tool has been developed offering systems engineers a fast way to analyze the feasibility of a particular design concept. The tool differs from available tools on the market in that it is specifically targeted at small satellites in the mass range of 1-50 kg, and with a limited

  14. Control room design and human factors using a virtual reality based tool for design, test and training

    International Nuclear Information System (INIS)

    Lirvall, Peter

    1998-02-01

    This report describes a user-centred approach to control room design adopted by IFE for the nuclear industry. The novelty of this approach is the development of a Control Room Philosophy, and the use of Virtual Reality (VR) technology as a tool in the design process, integrated with a specially developed Design Documentation System (DDS) and a process display prototyping tool PICASSO-3. The control room philosophy identifies all functional aspects of a control centre, to define the baseline principles and guidelines for the design. The use of VR technology enables end-users of the control room design (e.g. control room operators) to specify their preferred design of the new control room, and to replace the need for a physical mock-up to test and evaluate the proposed design. The DDS, integrated with the VR design tool, guides the control room operators, through a structured approach, to document the proposed design in a complete design specification. The VR tool, specially developed by IFE, is called the VR based Design, Test and Training tool (VR DTandT). It is not only intended to visualise the design, but also to test and evaluate the design. When the design is implemented, the same model is re-used as a VR based training simulator for operators. A special feature in the VR DTandT tool is that the verification and validation (VandV) tests, concerning human factors, are according to the regulative standards for nuclear control rooms

  15. Yield gap mapping as a support tool for risk management in agriculture

    Science.gov (United States)

    Lahlou, Ouiam; Imani, Yasmina; Slimani, Imane; Van Wart, Justin; Yang, Haishun

    2016-04-01

    The increasing frequency and magnitude of droughts in Morocco and the mounting losses from extended droughts in the agricultural sector emphasized the need to develop reliable and timely tools to manage drought and to mitigate resulting catastrophic damage. In 2011, Morocco launched a cereals multi-risk insurance with drought as the most threatening and the most frequent hazard in the country. However, and in order to assess the gap and to implement the more suitable compensation, it is essential to quantify the potential yield in each area. In collaboration with the University of Nebraska-Lincoln, a study is carried out in Morocco and aims to determine the yield potentials and the yield gaps in the different agro-climatic zones of the country. It fits into the large project: Global Yield Gap and Water Productivity Atlas: http://www.yieldgap.org/. The yield gap (Yg) is the magnitude and difference between crop yield potential (Yp) or water limited yield potential (Yw) and actual yields, reached by farmers. World Food Studies (WOFOST), which is a Crop simulation mechanistic model, has been used for this purpose. Prior to simulations, reliable information about actual yields, weather data, crop management data and soil data have been collected in 7 Moroccan buffer zones considered, each, within a circle of 100 km around a weather station point, homogenously spread across the country and where cereals are widely grown. The model calibration was also carried out using WOFOST default varieties data. The map-based results represent a robust tool, not only for drought insurance organization, but for agricultural and agricultural risk management. Moreover, accurate and geospatially granular estimates of Yg and Yw will allow to focus on regions with largest unexploited yield gaps and greatest potential to close them, and consequently to improve food security in the country.

  16. User Experience Design in Professional Map-Based Geo-Portals

    Directory of Open Access Journals (Sweden)

    Bastian Zimmer

    2013-10-01

    Full Text Available We have recently been witnessing the growing establishment of map-centered web-based geo-portals on national, regional and local levels. However, a particular issue with these geo-portals is that each instance has been implemented in different ways in terms of design, usability, functionality, interaction possibilities, map size and symbologies. In this paper, we try to tackle these shortcomings by analyzing and formalizing the requirements for map-based geo-portals in a user experience based approach. First, we propose a holistic definition the term of a “geo-portal”. Then, we present our approach to user experience design for map-based geo-portals by defining the functional requirements of a geo-portal, by analyzing previous geo-portal developments, by distilling the results of our empirical user study to perform practically-oriented user requirements, and finally by establishing a set of user experience design guidelines for the creation of map-based geo-portals. These design guidelines have been extracted for each of the main components of a geo-portal, i.e., the map, the search dialogue, the presentation of the search results, symbologies, and other aspects. These guidelines shall constitute the basis for future geo-portal developments to achieve standardization in the user-experience design of map-based geo-portals.

  17. Concept Mapping as an Innovative Tool for the Assessment of Learning: An Experimental Experience among Business Management Degree Students

    Science.gov (United States)

    Ruiz-Palomino, Pablo; Martinez-Canas, Ricardo

    2013-01-01

    In the search to improve the quality of education at the university level, the use of concept mapping is becoming an important instructional technique for enhancing the teaching-learning process. This educational tool is based on cognitive theories by making a distinction between learning by rote (memorizing) and learning by meaning, where…

  18. Design of a 3-D Magnetic Mapping System to Locate Reinforcing Steel in Concrete Pavements

    Science.gov (United States)

    2017-12-01

    This report outlines the design, fabrication, and testing of a 3-D magnetic mapping system used to locate reinforcing steel in concrete pavements developed at Kansas State University (KSU) in 2006. The magnetic sensing functionality is based on the p...

  19. Guidance for the Design and Adoption of Analytic Tools.

    Energy Technology Data Exchange (ETDEWEB)

    Bandlow, Alisa [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-12-01

    The goal is to make software developers aware of common issues that can impede the adoption of analytic tools. This paper provides a summary of guidelines, lessons learned and existing research to explain what is currently known about what analysts want and how to better understand what tools they do and don't need.

  20. Application of conceptual maps as didactic and pedagogical tools in the area of resources and information services

    Directory of Open Access Journals (Sweden)

    Maria Giovanna Guedes Farias

    2016-07-01

    Full Text Available Objective. Analyze the use of concept maps as didactic and pedagogical tools, from an experiment conducted in the classroom, in the disciplines Specialized Sources and Information Services of the graduation in Librarianship. Method. The methodological approach is characterized by its applied nature, exploratory and observation. Data were collected from the students by applying a questionnaire, and analysis took place with the help of content analysis techniques. Results. The most students see the conceptual maps as facilitators of knowledge construction, and view the use of these in different contexts, like the librarian activities. Conclusions. The use of concept maps as didactic and pedagogical tools can foster in students the enhancement of learning and reflection on the establishment of a route for the shared construction of new knowledge, adding previous knowledge and transforming them for use in cognitive fill gaps.

  1. The Application of Concurrent Engineering Tools and Design Structure Matrix in Designing Tire

    Science.gov (United States)

    Ginting, Rosnani; Fachrozi Fitra Ramadhan, T.

    2016-02-01

    The development of automobile industry in Indonesia is growing rapidly. This phenomenon causes companies related to the automobile industry such as tire industry must develop products based on customers’ needs and considering the timeliness of delivering the product to the customer. It could be reached by applying strategic planning in developing an integrated concept of product development. This research was held in PT. XYZ that applied the sequential approach in designing and developing products. The need to improve in one stage of product development could occur re-designing that needs longer time in developing a new product. This research is intended to get an integrated product design concept of tire pertaining to the customer's needs using Concurrent Engineering Tools by implementing the two-phased of product development. The implementation of Concurrent Engineering approach results in applying the stage of project planning, conceptual design, and product modules. The product modules consist of four modules that using Product Architecture - Design Structure Matrix to ease the designing process of new product development.

  2. CloudDOE: a user-friendly tool for deploying Hadoop clouds and analyzing high-throughput sequencing data with MapReduce.

    Science.gov (United States)

    Chung, Wei-Chun; Chen, Chien-Chih; Ho, Jan-Ming; Lin, Chung-Yen; Hsu, Wen-Lian; Wang, Yu-Chun; Lee, D T; Lai, Feipei; Huang, Chih-Wei; Chang, Yu-Jung

    2014-01-01

    Explosive growth of next-generation sequencing data has resulted in ultra-large-scale data sets and ensuing computational problems. Cloud computing provides an on-demand and scalable environment for large-scale data analysis. Using a MapReduce framework, data and workload can be distributed via a network to computers in the cloud to substantially reduce computational latency. Hadoop/MapReduce has been successfully adopted in bioinformatics for genome assembly, mapping reads to genomes, and finding single nucleotide polymorphisms. Major cloud providers offer Hadoop cloud services to their users. However, it remains technically challenging to deploy a Hadoop cloud for those who prefer to run MapReduce programs in a cluster without built-in Hadoop/MapReduce. We present CloudDOE, a platform-independent software package implemented in Java. CloudDOE encapsulates technical details behind a user-friendly graphical interface, thus liberating scientists from having to perform complicated operational procedures. Users are guided through the user interface to deploy a Hadoop cloud within in-house computing environments and to run applications specifically targeted for bioinformatics, including CloudBurst, CloudBrush, and CloudRS. One may also use CloudDOE on top of a public cloud. CloudDOE consists of three wizards, i.e., Deploy, Operate, and Extend wizards. Deploy wizard is designed to aid the system administrator to deploy a Hadoop cloud. It installs Java runtime environment version 1.6 and Hadoop version 0.20.203, and initiates the service automatically. Operate wizard allows the user to run a MapReduce application on the dashboard list. To extend the dashboard list, the administrator may install a new MapReduce application using Extend wizard. CloudDOE is a user-friendly tool for deploying a Hadoop cloud. Its smart wizards substantially reduce the complexity and costs of deployment, execution, enhancement, and management. Interested users may collaborate to improve the

  3. CloudDOE: a user-friendly tool for deploying Hadoop clouds and analyzing high-throughput sequencing data with MapReduce.

    Directory of Open Access Journals (Sweden)

    Wei-Chun Chung

    Full Text Available Explosive growth of next-generation sequencing data has resulted in ultra-large-scale data sets and ensuing computational problems. Cloud computing provides an on-demand and scalable environment for large-scale data analysis. Using a MapReduce framework, data and workload can be distributed via a network to computers in the cloud to substantially reduce computational latency. Hadoop/MapReduce has been successfully adopted in bioinformatics for genome assembly, mapping reads to genomes, and finding single nucleotide polymorphisms. Major cloud providers offer Hadoop cloud services to their users. However, it remains technically challenging to deploy a Hadoop cloud for those who prefer to run MapReduce programs in a cluster without built-in Hadoop/MapReduce.We present CloudDOE, a platform-independent software package implemented in Java. CloudDOE encapsulates technical details behind a user-friendly graphical interface, thus liberating scientists from having to perform complicated operational procedures. Users are guided through the user interface to deploy a Hadoop cloud within in-house computing environments and to run applications specifically targeted for bioinformatics, including CloudBurst, CloudBrush, and CloudRS. One may also use CloudDOE on top of a public cloud. CloudDOE consists of three wizards, i.e., Deploy, Operate, and Extend wizards. Deploy wizard is designed to aid the system administrator to deploy a Hadoop cloud. It installs Java runtime environment version 1.6 and Hadoop version 0.20.203, and initiates the service automatically. Operate wizard allows the user to run a MapReduce application on the dashboard list. To extend the dashboard list, the administrator may install a new MapReduce application using Extend wizard.CloudDOE is a user-friendly tool for deploying a Hadoop cloud. Its smart wizards substantially reduce the complexity and costs of deployment, execution, enhancement, and management. Interested users may collaborate

  4. WISDOM: A GIS-based supply demand mapping tool for woodfuel management

    International Nuclear Information System (INIS)

    Masera, Omar; Ghilardi, Adrian; Drigo, Rudi; Angel Trossero, Miguel

    2006-01-01

    In this paper, it is argued that adequately assessing the implications of the current patterns of woodfuel production and use, and the sustainable potentials of woodfuel resources, requires a holistic view and a better knowledge of the spatial patterns of woodfuel supply and demand. There is a need to conduct multi-scale spatially explicit analyses of woodfuel supply and demand that are able to articulate local heterogeneity at the regional and national levels. Studies that provide full-country coverage and are based on consistent integration of data at lower geographical scales are woefully lacking. This paper describes the Woodfuel Integrated Supply/Demand Overview Mapping model (WISDOM). This is a GIS-based tool, aimed at analyzing woodfuel demand and supply spatial patterns from a new perspective that includes: (a) the assembling of existing but dispersed information into single data sets, (b) a modular integration of these data sets, based on the analysis of key variables associated with woodfuel demand and supply patterns, and (c) a multiple-scale and spatially explicit representation of the results, in order to rank or highlight areas in which several criteria of interest coincide. The final objective of WISDOM is to assess the sustainability of woodfuel as a renewable and widespread energy source, while supporting strategic planning and policy formulation. Three case studies for Mexico, Slovenia, and Senegal illustrate the practical implementation and innovative results of using WISDOM. (author)

  5. Design of a Multi-layer Lane-Level Map for Vehicle Route Planning

    Directory of Open Access Journals (Sweden)

    Liu Chaoran

    2017-01-01

    Full Text Available With the development of intelligent transportation system, there occurs further demand for high precision localization and route planning, and simultaneously the traditional road-level map fails to meet with this requirement, by which this paper is motivated. In this paper, t he three-layer lane-level map architecture for vehicle path guidance is established, and the mathematical models of road-level layer, intermediate layer and lane-level layer are designed considering efficiency and precision. The geometric model of the lane-level layer of the map is characterized by Cubic Hermite Spline for continuity. A method of generating the lane geometry with fixed and variable control points is proposed, which can effectively ensure the accuracy with limited num ber of control points. In experimental part, a multi-layer map of an intersection is built to validate the map model, and an example of a local map was generated with the lane-level geometry.

  6. Conjecture Mapping: An Approach to Systematic Educational Design Research

    Science.gov (United States)

    Sandoval, William

    2014-01-01

    Design research is strongly associated with the learning sciences community, and in the 2 decades since its conception it has become broadly accepted. Yet within and without the learning sciences there remains confusion about how to do design research, with most scholarship on the approach describing what it is rather than how to do it. This…

  7. GeneRecon Users' Manual — A coalescent based tool for fine-scale association mapping

    DEFF Research Database (Denmark)

    Mailund, T

    2006-01-01

    GeneRecon is a software package for linkage disequilibrium mapping using coalescent theory. It is based on Bayesian Markov-chain Monte Carlo (MCMC) method for fine-scale linkage-disequilibrium gene mapping using high-density marker maps. GeneRecon explicitly models the genealogy of a sample of th...

  8. Development and Validation of a Hypersonic Vehicle Design Tool Based On Waverider Design Technique

    Science.gov (United States)

    Dasque, Nastassja

    Methodologies for a tool capable of assisting design initiatives for practical waverider based hypersonic vehicles were developed and validated. The design space for vehicle surfaces was formed using an algorithm that coupled directional derivatives with the conservation laws to determine a flow field defined by a set of post-shock streamlines. The design space is used to construct an ideal waverider with a sharp leading edge. A blunting method was developed to modify the ideal shapes to a more practical geometry for real-world application. Empirical and analytical relations were then systematically applied to the resulting geometries to determine local pressure, skin-friction and heat flux. For the ideal portion of the geometry, flat plate relations for compressible flow were applied. For the blunted portion of the geometry modified Newtonian theory, Fay-Riddell theory and Modified Reynolds analogy were applied. The design and analysis methods were validated using analytical solutions as well as empirical and numerical data. The streamline solution for the flow field generation technique was compared with a Taylor-Maccoll solution and showed very good agreement. The relationship between the local Stanton number and skin friction coefficient with local Reynolds number along the ideal portion of the body showed good agreement with experimental data. In addition, an automated grid generation routine was formulated to construct a structured mesh around resulting geometries in preparation for Computational Fluid Dynamics analysis. The overall analysis of the waverider body using the tool was then compared to CFD studies. The CFD flow field showed very good agreement with the design space. However, the distribution of the surface properties was near CFD results but did not have great agreement.

  9. Design and application of star map simulation system for star sensors

    Science.gov (United States)

    Wu, Feng; Shen, Weimin; Zhu, Xifang; Chen, Yuheng; Xu, Qinquan

    2013-12-01

    Modern star sensors are powerful to measure attitude automatically which assure a perfect performance of spacecrafts. They achieve very accurate attitudes by applying algorithms to process star maps obtained by the star camera mounted on them. Therefore, star maps play an important role in designing star cameras and developing procession algorithms. Furthermore, star maps supply significant supports to exam the performance of star sensors completely before their launch. However, it is not always convenient to supply abundant star maps by taking pictures of the sky. Thus, star map simulation with the aid of computer attracts a lot of interests by virtue of its low price and good convenience. A method to simulate star maps by programming and extending the function of the optical design program ZEMAX is proposed. The star map simulation system is established. Firstly, based on analyzing the working procedures of star sensors to measure attitudes and the basic method to design optical system by ZEMAX, the principle of simulating star sensor imaging is given out in detail. The theory about adding false stars and noises, and outputting maps is discussed and the corresponding approaches are proposed. Then, by external programming, the star map simulation program is designed and produced. Its user interference and operation are introduced. Applications of star map simulation method in evaluating optical system, star image extraction algorithm and star identification algorithm, and calibrating system errors are presented completely. It was proved that the proposed simulation method provides magnificent supports to the study on star sensors, and improves the performance of star sensors efficiently.

  10. Rhetorical Tools for Discovery and Amplification of Design Arguments

    DEFF Research Database (Denmark)

    Halstrøm, Per Liljenberg

    2017-01-01

    In this article design processes and designed artifacts are perceived as instances of argumentation. A design process is defined as a process of deliberation about what to do when seeking to design artifacts that aim to be persuasive about how we are to lead our lives. The intention of employing ...

  11. Capacity Bounds and Mapping Design for Binary Symmetric Relay Channels

    Directory of Open Access Journals (Sweden)

    Majid Nasiri Khormuji

    2012-12-01

    Full Text Available Capacity bounds for a three-node binary symmetric relay channel with orthogonal components at the destination are studied. The cut-set upper bound and the rates achievable using decode-and-forward (DF, partial DF and compress-and-forward (CF relaying are first evaluated. Then relaying strategies with finite memory-length are considered. An efficient algorithm for optimizing the relay functions is presented. The Boolean Fourier transform is then employed to unveil the structure of the optimized mappings. Interestingly, the optimized relay functions exhibit a simple structure. Numerical results illustrate that the rates achieved using the optimized low-dimensional functions are either comparable to those achieved by CF or superior to those achieved by DF relaying. In particular, the optimized low-dimensional relaying scheme can improve on DF relaying when the quality of the source-relay link is worse than or comparable to that of other links.

  12. Risk Informed Design Using Integrated Vehicle Rapid Assessment Tools

    Data.gov (United States)

    National Aeronautics and Space Administration — A successful proof of concept was performed in FY 2012 integrating the Envision tool for parametric estimates of vehicle mass and the Rapid Response Risk Assessment...

  13. Airborne radiometric data - A tool for reconnaissance geological mapping using a GIS

    International Nuclear Information System (INIS)

    Graham, D.F.; Bonham-Carter, G.F.

    1993-01-01

    A clustering technique is applied to radioelement data, and the resulting cluster map is compared with a digitized geological map within a GIS software package. The cross tabulation clearly identifies those geological units that have a distinctive radioelement response. By reclassifying the map overlay and imposing a color coding scheme that enhances bedrock geology classes, the relationship between the bedrock geology and radioelement response is enhanced. The degree of correlation between the two cartographic images is site dependent, rather than global. Areas where the two maps differ indicate zones of possible interest for field verification of published field maps for the purposes of mineral exploration. 13 refs

  14. A tool for early workstation design for small and medium enterprises evaluated in five cases

    NARCIS (Netherlands)

    Hallbeck, M.S.; Bosch, T.; Rhijn, J.W.van; Krause, F.; Looze, M.P.de; Vink, P.

    2010-01-01

    Five case studies on production line design were described to study the effect of an early design support tool. Based on these case studies, the simple, interactive, real-time, medium-fidelity, mixed-reality methodology was not only found to be a good early design stage evaluative tool for

  15. PhosphOrtholog: a web-based tool for cross-species mapping of orthologous protein post-translational modifications.

    Science.gov (United States)

    Chaudhuri, Rima; Sadrieh, Arash; Hoffman, Nolan J; Parker, Benjamin L; Humphrey, Sean J; Stöckli, Jacqueline; Hill, Adam P; James, David E; Yang, Jean Yee Hwa

    2015-08-19

    Most biological processes are influenced by protein post-translational modifications (PTMs). Identifying novel PTM sites in different organisms, including humans and model organisms, has expedited our understanding of key signal transduction mechanisms. However, with increasing availability of deep, quantitative datasets in diverse species, there is a growing need for tools to facilitate cross-species comparison of PTM data. This is particularly important because functionally important modification sites are more likely to be evolutionarily conserved; yet cross-species comparison of PTMs is difficult since they often lie in structurally disordered protein domains. Current tools that address this can only map known PTMs between species based on known orthologous phosphosites, and do not enable the cross-species mapping of newly identified modification sites. Here, we addressed this by developing a web-based software tool, PhosphOrtholog ( www.phosphortholog.com ) that accurately maps protein modification sites between different species. This facilitates the comparison of datasets derived from multiple species, and should be a valuable tool for the proteomics community. Here we describe PhosphOrtholog, a web-based application for mapping known and novel orthologous PTM sites from experimental data obtained from different species. PhosphOrtholog is the only generic and automated tool that enables cross-species comparison of large-scale PTM datasets without relying on existing PTM databases. This is achieved through pairwise sequence alignment of orthologous protein residues. To demonstrate its utility we apply it to two sets of human and rat muscle phosphoproteomes generated following insulin and exercise stimulation, respectively, and one publicly available mouse phosphoproteome following cellular stress revealing high mapping and coverage efficiency. Although coverage statistics are dataset dependent, PhosphOrtholog increased the number of cross-species mapped sites

  16. Possibilities for using software tools in the process of secuirty design

    Directory of Open Access Journals (Sweden)

    Ladislav Mariš

    2013-07-01

    Full Text Available The authors deal with the use of software support the process of security design. The article proposes the theoretical basis of the implementation of software tools to design activities. Based on the selected design standards of electrical safety systems application design solutions, especially in drawing documentation. The article should serve the needs of the project team members in order to use selected software tools and a subsequent increase in the degree of automation of design activities.

  17. Property Integration: Componentless Design Techniques and Visualization Tools

    DEFF Research Database (Denmark)

    El-Halwagi, Mahmoud M; Glasgow, I.M.; Eden, Mario Richard

    2004-01-01

    integration is defined as a functionality-based, holistic approach to the allocation and manipulation of streams and processing units, which is based on tracking, adjusting, assigning, and matching functionalities throughout the process. Revised lever arm rules are devised to allow optimal allocation while...... maintaining intra- and interstream conservation of the property-based clusters. The property integration problem is mapped into the cluster domain. This dual problem is solved in terms of clusters and then mapped to the primal problem in the property domain. Several new rules are derived for graphical...... techniques. Particularly, systematic rules and visualization techniques for the identification of optimal mixing of streams and their allocation to units. Furthermore, a derivation of the correspondence between clustering arms and fractional contribution of streams is presented. This correspondence...

  18. WASP: a Web-based Allele-Specific PCR assay designing tool for detecting SNPs and mutations

    Directory of Open Access Journals (Sweden)

    Assawamakin Anunchai

    2007-08-01

    Full Text Available Abstract Background Allele-specific (AS Polymerase Chain Reaction is a convenient and inexpensive method for genotyping Single Nucleotide Polymorphisms (SNPs and mutations. It is applied in many recent studies including population genetics, molecular genetics and pharmacogenomics. Using known AS primer design tools to create primers leads to cumbersome process to inexperience users since information about SNP/mutation must be acquired from public databases prior to the design. Furthermore, most of these tools do not offer the mismatch enhancement to designed primers. The available web applications do not provide user-friendly graphical input interface and intuitive visualization of their primer results. Results This work presents a web-based AS primer design application called WASP. This tool can efficiently design AS primers for human SNPs as well as mutations. To assist scientists with collecting necessary information about target polymorphisms, this tool provides a local SNP database containing over 10 million SNPs of various populations from public domain databases, namely NCBI dbSNP, HapMap and JSNP respectively. This database is tightly integrated with the tool so that users can perform the design for existing SNPs without going off the site. To guarantee specificity of AS primers, the proposed system incorporates a primer specificity enhancement technique widely used in experiment protocol. In particular, WASP makes use of different destabilizing effects by introducing one deliberate 'mismatch' at the penultimate (second to last of the 3'-end base of AS primers to improve the resulting AS primers. Furthermore, WASP offers graphical user interface through scalable vector graphic (SVG draw that allow users to select SNPs and graphically visualize designed primers and their conditions. Conclusion WASP offers a tool for designing AS primers for both SNPs and mutations. By integrating the database for known SNPs (using gene ID or rs number

  19. Design of Friction Stir Spot Welding Tools by Using a Novel Thermal-Mechanical Approach.

    Science.gov (United States)

    Su, Zheng-Ming; Qiu, Qi-Hong; Lin, Pai-Chen

    2016-08-09

    A simple thermal-mechanical model for friction stir spot welding (FSSW) was developed to obtain similar weld performance for different weld tools. Use of the thermal-mechanical model and a combined approach enabled the design of weld tools for various sizes but similar qualities. Three weld tools for weld radii of 4, 5, and 6 mm were made to join 6061-T6 aluminum sheets. Performance evaluations of the three weld tools compared fracture behavior, microstructure, micro-hardness distribution, and welding temperature of welds in lap-shear specimens. For welds made by the three weld tools under identical processing conditions, failure loads were approximately proportional to tool size. Failure modes, microstructures, and micro-hardness distributions were similar. Welding temperatures correlated with frictional heat generation rate densities. Because the three weld tools sufficiently met all design objectives, the proposed approach is considered a simple and feasible guideline for preliminary tool design.

  20. Mapping Chemical Selection Pathways for Designing Multicomponent Alloys: an informatics framework for materials design.

    Science.gov (United States)

    Srinivasan, Srikant; Broderick, Scott R; Zhang, Ruifeng; Mishra, Amrita; Sinnott, Susan B; Saxena, Surendra K; LeBeau, James M; Rajan, Krishna

    2015-12-18

    A data driven methodology is developed for tracking the collective influence of the multiple attributes of alloying elements on both thermodynamic and mechanical properties of metal alloys. Cobalt-based superalloys are used as a template to demonstrate the approach. By mapping the high dimensional nature of the systematics of elemental data embedded in the periodic table into the form of a network graph, one can guide targeted first principles calculations that identify the influence of specific elements on phase stability, crystal structure and elastic properties. This provides a fundamentally new means to rapidly identify new stable alloy chemistries with enhanced high temperature properties. The resulting visualization scheme exhibits the grouping and proximity of elements based on their impact on the properties of intermetallic alloys. Unlike the periodic table however, the distance between neighboring elements uncovers relationships in a complex high dimensional information space that would not have been easily seen otherwise. The predictions of the methodology are found to be consistent with reported experimental and theoretical studies. The informatics based methodology presented in this study can be generalized to a framework for data analysis and knowledge discovery that can be applied to many material systems and recreated for different design objectives.

  1. Integrated Design and Analysis Tools for Reduced Weight, Affordable Fiber Steered Composites

    National Research Council Canada - National Science Library

    Hale, Richard

    2004-01-01

    This report describes geometric design tools which encompass the overall process flow for fiber placed and fiber steered structures, to allow parallel considerations for manufacturability and mechanical performance...

  2. A Framework for the Application of Robust Design Methods and Tools

    DEFF Research Database (Denmark)

    Göhler, Simon Moritz; Howard, Thomas J.

    2014-01-01

    can deliver are not always clear. Expectations to the output are sometimes misleading and imply the incorrect utilization of tools. A categorization of tools, methods and techniques typically associated with robust design methodology in the literature is provided in this paper in terms of purpose...... and deliverables of the individual tool or method. The majority of tools aims for optimizing an existing design solution or give an indication of how robust a design is, which requires a somewhat settled design. Furthermore, the categorization presented in this paper shows a lack in the methodology for tools...... of the existing tools. When to apply, what tool or method, for which purpose can be concluded. The paper also contributes with a framework for researchers to derive a generic landscape or database for RDM build upon the main premises and deliverables of each method....

  3. Radiation Mitigation and Power Optimization Design Tools for Reconfigurable Hardware in Orbit

    Science.gov (United States)

    French, Matthew; Graham, Paul; Wirthlin, Michael; Wang, Li; Larchev, Gregory

    2005-01-01

    The Reconfigurable Hardware in Orbit (RHinO)project is focused on creating a set of design tools that facilitate and automate design techniques for reconfigurable computing in space, using SRAM-based field-programmable-gate-array (FPGA) technology. In the second year of the project, design tools that leverage an established FPGA design environment have been created to visualize and analyze an FPGA circuit for radiation weaknesses and power inefficiencies. For radiation, a single event Upset (SEU) emulator, persistence analysis tool, and a half-latch removal tool for Xilinx/Virtex-II devices have been created. Research is underway on a persistence mitigation tool and multiple bit upsets (MBU) studies. For power, synthesis level dynamic power visualization and analysis tools have been completed. Power optimization tools are under development and preliminary test results are positive.

  4. Evaluating a digital ship design tool prototype: Designers' perceptions of novel ergonomics software.

    Science.gov (United States)

    Mallam, Steven C; Lundh, Monica; MacKinnon, Scott N

    2017-03-01

    Computer-aided solutions are essential for naval architects to manage and optimize technical complexities when developing a ship's design. Although there are an array of software solutions aimed to optimize the human element in design, practical ergonomics methodologies and technological solutions have struggled to gain widespread application in ship design processes. This paper explores how a new ergonomics technology is perceived by naval architecture students using a mixed-methods framework. Thirteen Naval Architecture and Ocean Engineering Masters students participated in the study. Overall, results found participants perceived the software and its embedded ergonomics tools to benefit their design work, increasing their empathy and ability to understand the work environment and work demands end-users face. However, participant's questioned if ergonomics could be practically and efficiently implemented under real-world project constraints. This revealed underlying social biases and a fundamental lack of understanding in engineering postgraduate students regarding applied ergonomics in naval architecture. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Retrieval interval mapping, a tool to optimize the spectral retrieval range in differential optical absorption spectroscopy

    Science.gov (United States)

    Vogel, L.; Sihler, H.; Lampel, J.; Wagner, T.; Platt, U.

    2012-06-01

    Remote sensing via differential optical absorption spectroscopy (DOAS) has become a standard technique to identify and quantify trace gases in the atmosphere. The technique is applied in a variety of configurations, commonly classified into active and passive instruments using artificial and natural light sources, respectively. Platforms range from ground based to satellite instruments and trace-gases are studied in all kinds of different environments. Due to the wide range of measurement conditions, atmospheric compositions and instruments used, a specific challenge of a DOAS retrieval is to optimize the parameters for each specific case and particular trace gas of interest. This becomes especially important when measuring close to the detection limit. A well chosen evaluation wavelength range is crucial to the DOAS technique. It should encompass strong absorption bands of the trace gas of interest in order to maximize the sensitivity of the retrieval, while at the same time minimizing absorption structures of other trace gases and thus potential interferences. Also, instrumental limitations and wavelength depending sources of errors (e.g. insufficient corrections for the Ring effect and cross correlations between trace gas cross sections) need to be taken into account. Most often, not all of these requirements can be fulfilled simultaneously and a compromise needs to be found depending on the conditions at hand. Although for many trace gases the overall dependence of common DOAS retrieval on the evaluation wavelength interval is known, a systematic approach to find the optimal retrieval wavelength range and qualitative assessment is missing. Here we present a novel tool to determine the optimal evaluation wavelength range. It is based on mapping retrieved values in the retrieval wavelength space and thus visualize the consequence of different choices of retrieval spectral ranges, e.g. caused by slightly erroneous absorption cross sections, cross correlations and

  6. Storytelling tools in support of user experience design

    NARCIS (Netherlands)

    Peng, Qiong

    2017-01-01

    Storytelling has been proposed as an intuitive way to support communication in user experience design. With story-based thinking, designers can gain a better understanding of the potential user experience, developing and discussing design ideas within an (imagined) context. This proposal introduces

  7. A generic tool for cost estimating in aircraft design

    NARCIS (Netherlands)

    Castagne, S.; Curran, R.; Rothwell, A.; Price, M.; Benard, E.; Raghunathan, S.

    2008-01-01

    A methodology to estimate the cost implications of design decisions by integrating cost as a design parameter at an early design stage is presented. The model is developed on a hierarchical basis, the manufacturing cost of aircraft fuselage panels being analysed in this paper. The manufacturing cost

  8. Designing Knowledge Map for Knowledge Management projects Using Network Analysis

    Directory of Open Access Journals (Sweden)

    heidar najafi

    2017-09-01

    Full Text Available In this research knowledge management has been studied as an interdisciplinary area. We aim to find an answer for this question that "what are the scientific structure and knowledge map of knowledge management projects regarding these two aspect of subject areas and keywords. For this purpose, nearly 40000 scientific documents including knowledge management as one of their keywords were selected from Scopus database and were studied in various subject areas. In this research,bar charts have been drawn for each index of subject areas and keywords. Besides, using Co-occurrence matrix, adjacency graphs were drawn and then clustered using Average-Link algorithm. Bar charts and graphs were drawn using R and Excel software. The results of this research showed that among the researches on knowledge management in the world, the most relevant scientific fields to knowledge management are Computer Sciences with 32.5%, Business, Management and Accounting with 14.5%, Engineering with 13.7%, Decisive Sciences with 12.6%, Mathematics with 7.07%, and Social Sciences with 6.63%, respectively. The most keywords collocate with knowledge management in the world are Human-Computer Interaction, Information Management, Systems Management, Information Technology, Manufacturing, Acquisition of Knowledge, Semantics, Knowledge Transfer, Ontology and Information Retrieval.

  9. Walkability Explorer. An Evaluation and Design Support Tool for Walkability

    Directory of Open Access Journals (Sweden)

    Ivan Blečić

    2014-05-01

    Full Text Available Walkability Explorer is a software tool for the evaluation of urban walkability which, we argue, is an important aspect of the quality of life in cities. Many conventional approaches to the assessment of quality of life measure the distribution, density and distances of different opportunities in space. But distance is not all there is. To reason in terms of urban capabilities of people we should also take into account the quality of pedestrian accessibility and of urban opportunities offered by the city. The software tool we present in this paper is an user-friendly implementation of such an evaluation approach to walkability. It includes several GIS and analysis features, and is interoperable with other standard GIS and data-analysis tools.

  10. Design and update of a classification system: the UCSD map of science.

    Directory of Open Access Journals (Sweden)

    Katy Börner

    Full Text Available Global maps of science can be used as a reference system to chart career trajectories, the location of emerging research frontiers, or the expertise profiles of institutes or nations. This paper details data preparation, analysis, and layout performed when designing and subsequently updating the UCSD map of science and classification system. The original classification and map use 7.2 million papers and their references from Elsevier's Scopus (about 15,000 source titles, 2001-2005 and Thomson Reuters' Web of Science (WoS Science, Social Science, Arts & Humanities Citation Indexes (about 9,000 source titles, 2001-2004-about 16,000 unique source titles. The updated map and classification adds six years (2005-2010 of WoS data and three years (2006-2008 from Scopus to the existing category structure-increasing the number of source titles to about 25,000. To our knowledge, this is the first time that a widely used map of science was updated. A comparison of the original 5-year and the new 10-year maps and classification system show (i an increase in the total number of journals that can be mapped by 9,409 journals (social sciences had a 80% increase, humanities a 119% increase, medical (32% and natural science (74%, (ii a simplification of the map by assigning all but five highly interdisciplinary journals to exactly one discipline, (iii a more even distribution of journals over the 554 subdisciplines and 13 disciplines when calculating the coefficient of variation, and (iv a better reflection of journal clusters when compared with paper-level citation data. When evaluating the map with a listing of desirable features for maps of science, the updated map is shown to have higher mapping accuracy, easier understandability as fewer journals are multiply classified, and higher usability for the generation of data overlays, among others.

  11. Soil magnetic susceptibility mapping as a pollution and provenance tool: an example from southern New Zealand

    Science.gov (United States)

    Martin, A. P.; Ohneiser, C.; Turnbull, R. E.; Strong, D. T.; Demler, S.

    2018-02-01

    The presence or absence, degree and variation of heavy metal contamination in New Zealand soils is a matter of ongoing debate as it affects soil quality, agriculture and human health. In many instances, however, the soil heavy metal concentration data do not exist to answer these questions and the debate is ongoing. To address this, magnetic susceptibility (a common proxy for heavy metal contamination) values were measured in topsoil (0-30 cm) and subsoil (50-70 cm) at grid sites spaced at 8 km intervals across ca. 20 000 km2 of southern New Zealand. Samples were measured for both mass- and volume-specific magnetic susceptibility, with results being strongly, positively correlated. Three different methods of determining anomalies were applied to the data including the topsoil-subsoil difference method, Tukey boxplot method and geoaccumulation index method, with each method filtering out progressively more anomalies. Additional soil magnetic (hysteresis, isothermal remanence and thermomagnetic) measurements were made on a select subset of samples from anomalous sites. Magnetite is the dominant remanence carrying mineral, and magnetic susceptibility is governed by that minerals concentration in soils, rather than mineral type. All except two anomalous sites have a dominant geogenic source (cf. anthropogenic). By proxy, heavy metal contamination in southern New Zealand soils is minimal, making them relatively pristine. The provenance of the magnetic minerals in the anomalous sites can be traced back to likely sources in outcrops of igneous rocks within the same catchment, terrane or rock type: a distance of Soil provenance is a key step when mapping element or isotopic distribution, vectoring to mineralization or studying soil for agricultural suitability, water quality or environmental regulation. Measuring soil magnetic susceptibility is a useful, quick and inexpensive tool that usefully supplements soil geochemical data.

  12. Hot deformation and processing maps of K310 cold work tool steel

    International Nuclear Information System (INIS)

    Ezatpour, H.R.; Sajjadi, S.A.; Haddad-Sabzevar, M.; Ebrahimi, G.R.

    2012-01-01

    Highlights: ► The steady state stresses are related to strain rate and temperature. ► The study led to n DRX = 3.95 and Q DRX = 219.65 kJ/(mol K) and α = 1.2 × 10 −2 MPa −1 . ► The safe domain occurs in the region of 1000–1100 °C for a strain rate of 0.1 s −1 . - Abstract: Hot working response of cold work tool steel K310 was investigated by means of compression test at temperature range of 900–1100 °C. The equivalent strain rates used in these tests were 0.01, 0.1 and 1 s −1 , respectively in order to obtain the processing and stability maps of the studied material following the Dynamic Material Model. All the zones of flow instability were studied through scanning electron microscopy (SEM). The microstructure of the samples after deformation was then analyzed by light microscopy and the differences were compared together. The steady state stress obtained from the flow curves was related to strain rate (ε . ) and temperature (T) by means of the well known Zener–Holloman equation. A least square analysis of the data led to n = 3.95 and Q DRX = 219.65 kJ/mol and α = 1.2 × 10 −2 MPa −1 . Also, hardness results showed that by increasing strain from peak to steady state strain, hardness was decreased.

  13. A computer tool to support in design of industrial Ethernet.

    Science.gov (United States)

    Lugli, Alexandre Baratella; Santos, Max Mauro Dias; Franco, Lucia Regina Horta Rodrigues

    2009-04-01

    This paper presents a computer tool to support in the project and development of an industrial Ethernet network, verifying the physical layer (cables-resistance and capacitance, scan time, network power supply-POE's concept "Power Over Ethernet" and wireless), and occupation rate (amount of information transmitted to the network versus the controller network scan time). These functions are accomplished without a single physical element installed in the network, using only simulation. The computer tool has a software that presents a detailed vision of the network to the user, besides showing some possible problems in the network, and having an extremely friendly environment.

  14. Reducing the information load in map animations as a tool for exploratory analysis

    OpenAIRE

    Multimäki, Salla

    2016-01-01

    This dissertation investigates the information load that animated maps cause to their viewers, and presents two novel visualisation methods to support the exploratory visual analysis of the animations. Information load consists of the information content of the map and its presentation. The number of objects and their attributes are the unavoidable content, but the visualisation of the objects, the background map, and display settings of an animation have an effect on the information load and...

  15. User-Centered Design for Interactive Maps: A Case Study in Crime Analysis

    Directory of Open Access Journals (Sweden)

    Robert E. Roth

    2015-02-01

    Full Text Available In this paper, we address the topic of user-centered design (UCD for cartography, GIScience, and visual analytics. Interactive maps are ubiquitous in modern society, yet they often fail to “work” as they could or should. UCD describes the process of ensuring interface success—map-based or otherwise—by gathering input and feedback from target users throughout the design and development of the interface. We contribute to the expanding literature on UCD for interactive maps in two ways. First, we synthesize core concepts on UCD from cartography and related fields, as well as offer new ideas, in order to organize existing frameworks and recommendations regarding the UCD of interactive maps. Second, we report on a case study UCD process for GeoVISTA CrimeViz, an interactive and web-based mapping application supporting visual analytics of criminal activity in space and time. The GeoVISTA CrimeViz concept and interface were improved iteratively by working through a series of user→utility→usability loops in which target users provided input and feedback on needs and designs (user, prompting revisions to the conceptualization and functional requirements of the interface (utility, and ultimately leading to new mockups and prototypes of the interface (usability for additional evaluation by target users (user… and so on. Together, the background review and case study offer guidance for applying UCD to interactive mapping projects, and demonstrate the benefit of including target users throughout design and development.

  16. Using Linkage Maps as a Tool To Determine Patterns of Chromosome Synteny in the Genus Salvelinus

    Directory of Open Access Journals (Sweden)

    Matthew C. Hale

    2017-11-01

    Full Text Available Next generation sequencing techniques have revolutionized the collection of genome and transcriptome data from nonmodel organisms. This manuscript details the application of restriction site-associated DNA sequencing (RADseq to generate a marker-dense genetic map for Brook Trout (Salvelinus fontinalis. The consensus map was constructed from three full-sib families totaling 176 F1 individuals. The map consisted of 42 linkage groups with a total female map size of 2502.5 cM, and a total male map size of 1863.8 cM. Synteny was confirmed with Atlantic Salmon for 38 linkage groups, with Rainbow Trout for 37 linkage groups, Arctic Char for 36 linkage groups, and with a previously published Brook Trout linkage map for 39 linkage groups. Comparative mapping confirmed the presence of 8 metacentric and 34 acrocentric chromosomes in Brook Trout. Six metacentric chromosomes seem to be conserved with Arctic Char suggesting there have been at least two species-specific fusion and fission events within the genus Salvelinus. In addition, the sex marker (sdY; sexually dimorphic on the Y chromosome was mapped to Brook Trout BC35, which is homologous with Atlantic Salmon Ssa09qa, Rainbow Trout Omy25, and Arctic Char AC04q. Ultimately, this linkage map will be a useful resource for studies on the genome organization of Salvelinus, and facilitates comparisons of the Salvelinus genome with Salmo and Oncorhynchus.

  17. Intrageneric Primer Design: Bringing Bioinformatics Tools to the Class

    Science.gov (United States)

    Lima, Andre O. S.; Garces, Sergio P. S.

    2006-01-01

    Bioinformatics is one of the fastest growing scientific areas over the last decade. It focuses on the use of informatics tools for the organization and analysis of biological data. An example of their importance is the availability nowadays of dozens of software programs for genomic and proteomic studies. Thus, there is a growing field (private…

  18. An online planning tool for designing terrace layouts

    Science.gov (United States)

    A web-based conservation planning tool, WebTERLOC (web-based Terrace Location Program), was developed to provide multiple terrace layout options using digital elevation model (DEM) and geographic information systems (GIS). Development of a terrace system is complicated by the time-intensive manual ...

  19. Business Process Variability : A Tool for Declarative Template Design

    NARCIS (Netherlands)

    Bulanov, P.; Groefsema, H.; Aiello, M.

    2012-01-01

    To lower both implementation time and cost, many Business Process Management tools use process templates to implement highly recurring processes. However, in order for such templates to be used, a process has to adhere substantially to the template. Therefore, current practice for processes which

  20. HBLAST: Parallelised sequence similarity--A Hadoop MapReducable basic local alignment search tool.

    Science.gov (United States)

    O'Driscoll, Aisling; Belogrudov, Vladislav; Carroll, John; Kropp, Kai; Walsh, Paul; Ghazal, Peter; Sleator, Roy D

    2015-04-01

    The recent exponential growth of genomic databases has resulted in the common task of sequence alignment becoming one of the major bottlenecks in the field of computational biology. It is typical for these large datasets and complex computations to require cost prohibitive High Performance Computing (HPC) to function. As such, parallelised solutions have been proposed but many exhibit scalability limitations and are incapable of effectively processing "Big Data" - the name attributed to datasets that are extremely large, complex and require rapid processing. The Hadoop framework, comprised of distributed storage and a parallelised programming framework known as MapReduce, is specifically designed to work with such datasets but it is not trivial to efficiently redesign and implement bioinformatics algorithms according to this paradigm. The parallelisation strategy of "divide and conquer" for alignment algorithms can be applied to both data sets and input query sequences. However, scalability is still an issue due to memory constraints or large databases, with very large database segmentation leading to additional performance decline. Herein, we present Hadoop Blast (HBlast), a parallelised BLAST algorithm that proposes a flexible method to partition both databases and input query sequences using "virtual partitioning". HBlast presents improved scalability over existing solutions and well balanced computational work load while keeping database segmentation and recompilation to a minimum. Enhanced BLAST search performance on cheap memory constrained hardware has significant implications for in field clinical diagnostic testing; enabling faster and more accurate identification of pathogenic DNA in human blood or tissue samples. Copyright © 2015 Elsevier Inc. All rights reserved.

  1. Digital surveying and mapping of forest road network for development of a GIS tool for the effective protection and management of natural ecosystems

    Science.gov (United States)

    Drosos, Vasileios C.; Liampas, Sarantis-Aggelos G.; Doukas, Aristotelis-Kosmas G.

    2014-08-01

    In our time, the Geographic Information Systems (GIS) have become important tools, not only in the geosciences and environmental sciences, as well as virtually for all researches that require monitoring, planning or land management. The purpose of this paper was to develop a planning tool and decision making tool using AutoCAD Map software, ArcGIS and Google Earth with emphasis on the investigation of the suitability of forest roads' mapping and the range of its implementation in Greece in prefecture level. Integrating spatial information into a database makes data available throughout the organization; improving quality, productivity, and data management. Also working in such an environment, you can: Access and edit information, integrate and analyze data and communicate effectively. To select desirable information such as forest road network in a very early stage in the planning of silviculture operations, for example before the planning of the harvest is carried out. The software programs that were used were AutoCAD Map for the export in shape files for the GPS data, and ArcGIS in shape files (ArcGlobe), while Google Earth with KML files (Keyhole Markup Language) in order to better visualize and evaluate existing conditions, design in a real-world context and exchange information with government agencies, utilities, and contractors in both CAD and GIS data formats. The automation of the updating procedure and transfer of any files between agencies-departments is one of the main tasks of the integrated GIS-tool among the others should be addressed.

  2. Evolution of Flux Mapping System (FMS) from 540 MWe to 700 MWe Indian PHWR: design perspective

    International Nuclear Information System (INIS)

    Sonavani, Manojkumar; Kelkar, M.G.; Singhvi, P.K.; Roy, S.; Ingle, V.J.

    2013-01-01

    The Flux Mapping System (FMS) of 700 MWe PHWR computes a detailed flux/power distribution of the reactor core using modal synthesis method and is also generate setback on different parameters by monitoring thermal neutron flux at more than 100 points inside the reactor core. These types of setbacks are introduced first time in Indian PHWRs. The paper brings out the Evolution of Flux Mapping System (FMS) from 540 MWe to 700 MWe and the overall design philosophy. The paper emphasizes on comparisons between 540 MWe and 700 MWe design, considerations for architectural design and setbacks for 700 MWe. (author)

  3. ErgoTMC, A New Tool For Human-Centered TMC Design

    Science.gov (United States)

    2000-04-01

    The Federal Highway Administration (FHWA) has recently made available a new tool to assist Transportation Management Center (TMC) managers and designers in incorporating human-centered design principles into their TMCs. ErgoTMC, a web site tailored t...

  4. Automated Design Tools for Integrated Mixed-Signal Microsystems (NeoCAD)

    National Research Council Canada - National Science Library

    Petre, P; Visher, J; Shringarpure, R; Valley, F; Swaminathan, M

    2005-01-01

    Automated design tools and integrated design flow methodologies were developed that demonstrated more than an order- of-magnitude reduction in cycle time and cost for mixed signal (digital/analoglRF...

  5. A Maturity Grid Assessment Tool for Environmentally Conscious Design in the Medical Device Industry

    DEFF Research Database (Denmark)

    Moultrie, James; Sutcliffe, Laura Francesca Rose; Maier, Anja

    2016-01-01

    . This intervention tool provides designers and product marketers with insights on how to improve the design of their medical devices and specifically allows consideration of the complex trade-offs between decisions that influence different life-cycle stages. Through the tool, actionable insight is created......The medical device industry is growing increasingly concerned about environmental impact of products. Whilst there are many tools aiming to support environmentally conscious design, they are typically complex to use, demand substantial data collection and are not tailored to the specific needs...... of the medical device sector. This paper reports on the development of a Maturity Grid to address this gap. This novel design tool was developed iteratively through application in five case studies. The tool captures principles of eco-design for medical devices in a simple form, designed to be used by a team...

  6. Developing an energy design tool: Phase 1 report

    Energy Technology Data Exchange (ETDEWEB)

    Heidell, J.A.; Deringer, J.D.

    1987-02-01

    This report documents the planning phase of a proposed four-phase project for creating computer software to provide energy expertise in a manageable form to architects and engineers - thereby decreasing energy use in new buildings. The government sponsored software would be integrated with commercially developed software for use in the design of buildings. The result would be an integrated software package to aid the designer in the building design process and to provide expert insight into the energy related implications of a proposed design.

  7. Computational Wind Tunnel: A Design Tool for Rotorcraft, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — During initial design studies, parametric variation of vehicle geometry is routine. In addition, rotorcraft engineers traditionally use the wind tunnel to evaluate...

  8. Computational Wind Tunnel: A Design Tool for Rotorcraft, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Rotorcraft engineers traditionally use the wind tunnel to evaluate and finalize designs. Insufficient correlation between wind tunnel results and flight tests, have...

  9. Integrating Thermal Tools Into the Mechanical Design Process

    Science.gov (United States)

    Tsuyuki, Glenn T.; Siebes, Georg; Novak, Keith S.; Kinsella, Gary M.

    1999-01-01

    The intent of mechanical design is to deliver a hardware product that meets or exceeds customer expectations, while reducing cycle time and cost. To this end, an integrated mechanical design process enables the idea of parallel development (concurrent engineering). This represents a shift from the traditional mechanical design process. With such a concurrent process, there are significant issues that have to be identified and addressed before re-engineering the mechanical design process to facilitate concurrent engineering. These issues also assist in the integration and re-engineering of the thermal design sub-process since it resides within the entire mechanical design process. With these issues in mind, a thermal design sub-process can be re-defined in a manner that has a higher probability of acceptance, thus enabling an integrated mechanical design process. However, the actual implementation is not always problem-free. Experience in applying the thermal design sub-process to actual situations provides the evidence for improvement, but more importantly, for judging the viability and feasibility of the sub-process.

  10. A Perspective on Computational Human Performance Models as Design Tools

    Science.gov (United States)

    Jones, Patricia M.

    2010-01-01

    The design of interactive systems, including levels of automation, displays, and controls, is usually based on design guidelines and iterative empirical prototyping. A complementary approach is to use computational human performance models to evaluate designs. An integrated strategy of model-based and empirical test and evaluation activities is particularly attractive as a methodology for verification and validation of human-rated systems for commercial space. This talk will review several computational human performance modeling approaches and their applicability to design of display and control requirements.

  11. The mechanical design of a transfemoral prosthesis using computational tools and design methodology

    Directory of Open Access Journals (Sweden)

    John Sánchez Otero

    2012-09-01

    Full Text Available Artificial limb replacement with lower limb prostheses has been widely reported in current scientific literature. There are many lower limb prosthetic designs ranging from a single-axis knee mechanism to complex mechanisms involving microcontrollers, made from many materials ranging from lightweight, high specific strength ones (e.g., carbon fibre to traditional forms (e.g., stainless steel. However, the challenge is to design prostheses whose movement resembles the human body’s natural movement as closely as possible. Advances in prosthetics have enabled many amputees to return to their everyday activities; however, such prostheses are expensive, some costing as much as $60,000. Many of the affected population in Colombia have scarce economic resources; there is therefore a need to develop affordable functional prostheses.The Universidad del Norte’s Materials, Processes and Design Research Group and the Robotics and Intelligent Systems Group have been working on this line of research to develop modular prostheses which can be adjusted to each patient’s requirements. This research represents an initial methodological approach to developing a prosthesis in which software tools have been used (the finite element method with a criteria relationship matrix for selecting the best alternative while considering different aspects such as mod-ularity, cost, stiffness and weight.

  12. ASTRID© - Advanced Solar Tubular ReceIver Design: A powerful tool for receiver design and optimization

    Science.gov (United States)

    Frantz, Cathy; Fritsch, Andreas; Uhlig, Ralf

    2017-06-01

    In solar tower power plants the receiver is one of the critical components. It converts the solar radiation into heat and must withstand high heat flux densities and high daily or even hourly gradients (due to passage of clouds). For this reason, the challenge during receiver design is to find a reasonable compromise between receiver efficiency, reliability, lifetime and cost. There is a strong interaction between the heliostat field, the receiver and the heat transfer fluid. Therefore, a proper receiver design needs to consider these components within the receiver optimization. There are several design and optimization tools for receivers, but most of them focus only on the receiver, ignoring the heliostat field and other parts of the plant. During the last years DLR developed the ASTRIDcode for tubular receiver concept simulation. The code comprises both a high and a low-detail model. The low-detail model utilizes a number of simplifications which allow the user to screen a high number of receiver concepts for optimization purposes. The high-detail model uses a FE model and is able to compute local absorber and salt temperatures with high accuracy. One key strength of the ASTRIDcode is its interface to a ray tracing software which simulates a realistic heat flux distributions on the receiver surface. The results generated by the ASTRIDcode have been validated by CFD simulations and measurement data.

  13. Design and application of a formal verification tool for VHDL designs

    International Nuclear Information System (INIS)

    John, Ajith K.; Bhattacharjee, A.K.; Sharma, Mukesh; Ganesh, G.; Dhodapkar, S.D.; Biswas, B.B.

    2012-01-01

    The design of Control and Instrumentation (C and I) systems used in safety critical applications such as nuclear power plants involves partitioning of the overall system functionality into subparts and implementing each subpart in hardware and/or software as appropriate. With increasing use of programmable devices like FPGA, the hardware subsystems are often implemented in Hardware Description Languages (HDL) like VHDL. Since the functional bugs in such hardware subsystems used in safety critical C and I systems have disastrous consequences, it is important to use rigorous reasoning to verify the functionalities of the HDL models. Work on developing a software tool named VBMC (VHDL Bounded Model Checker) for mathematically proving functional properties of hardware designs described in VHDL has been described. It is based on the principle of bounded model checking. Although the design of VBMC is still evolving, it is currently also being used for the functional verification of FPGA based intelligent I/O (EHS) boards developed in Reactor Control Division, BARC

  14. Program Design Report of the CNC Machine Tool(V-1)

    International Nuclear Information System (INIS)

    Youm, Ki Un; Moon, J. S.; Lee, I. B.; Youn, J. H.

    2010-08-01

    The application of CNC machine tool being widely expanded according to variety of machine work method and rapid promotion of machine tool, cutting tool, for high speed efficient machine work. In order to conduct of the project of manufacture and maintenance of laboratory equipment, production design and machine work technology are continually developed, especially the application of CNC machine tool is very important for the improvement of productivity, quality and clearing up a manpower shortage. We publish technical report which it includes CNC machine tool program and drawing, it contributes to the systematic development of CNC program design and machine work technology

  15. Decision support tools in conservation: a workshop to improve user-centred design

    Directory of Open Access Journals (Sweden)

    David Rose

    2017-09-01

    Full Text Available A workshop held at the University of Cambridge in May 2017 brought developers, researchers, knowledge brokers, and users together to discuss user-centred design of decision support tools. Decision support tools are designed to take users through logical decision steps towards an evidence-informed final decision. Although they may exist in different forms, including on paper, decision support tools are generally considered to be computer- (online, software or app-based. Studies have illustrated the potential value of decision support tools for conservation, and there are several papers describing the design of individual tools. Rather less attention, however, has been placed on the desirable characteristics for use, and even less on whether tools are actually being used in practice. This is concerning because if tools are not used by their intended end user, for example a policy-maker or practitioner, then its design will have wasted resources. Based on an analysis of papers on tool use in conservation, there is a lack of social science research on improving design, and relatively few examples where users have been incorporated into the design process. Evidence from other disciplines, particularly human-computer interaction research, illustrates that involving users throughout the design of decision support tools increases the relevance, usability, and impact of systems. User-centred design of tools is, however, seldom mentioned in the conservation literature. The workshop started the necessary process of bringing together developers and users to share knowledge about how to conduct good user-centred design of decision support tools. This will help to ensure that tools are usable and make an impact in conservation policy and practice.

  16. Method and Tool for Design Process Navigation and Automatic Generation of Simulation Models for Manufacturing Systems

    Science.gov (United States)

    Nakano, Masaru; Kubota, Fumiko; Inamori, Yutaka; Mitsuyuki, Keiji

    Manufacturing system designers should concentrate on designing and planning manufacturing systems instead of spending their efforts on creating the simulation models to verify the design. This paper proposes a method and its tool to navigate the designers through the engineering process and generate the simulation model automatically from the design results. The design agent also supports collaborative design projects among different companies or divisions with distributed engineering and distributed simulation techniques. The idea was implemented and applied to a factory planning process.

  17. Concept Mapping as a Tool to Develop and Measure Students' Understanding in Science

    Science.gov (United States)

    Tan, Sema; Erdimez, Omer; Zimmerman, Robert

    2017-01-01

    Concept maps measured a student's understanding of the complexity of concepts, and interrelationships. Novak and Gowin (1984) claimed that the continuous use of concept maps increased the complexity and interconnectedness of students' understanding of relationships between concepts in a particular science domain. This study has two purposes; the…

  18. Evaluating kriging as a tool to improve moderate resolution maps of forest biomass

    Science.gov (United States)

    Elizabeth A. Freeman; Gretchen G. Moisen

    2007-01-01

    The USDA Forest Service, Forest Inventory and Analysis program (FIA) recently produced a nationwide map of forest biomass by modeling biomass collected on forest inventory plots as nonparametric functions of moderate resolution satellite data and other environmental variables using Cubist software. Efforts are underway to develop methods to enhance this initial map. We...

  19. Map-IT! A Web-Based GIS Tool for Watershed Science Education.

    Science.gov (United States)

    Curtis, David H.; Hewes, Christopher M.; Lossau, Matthew J.

    This paper describes the development of a prototypic, Web-accessible GIS solution for K-12 science education and citizen-based watershed monitoring. The server side consists of ArcView IMS running on an NT workstation. The client is built around MapCafe. The client interface, which runs through a standard Web browser, supports standard MapCafe…

  20. The effects of a concept map-based support tool on simulation-based inquiry learning

    NARCIS (Netherlands)

    Hagemans, M.G.; van der Meij, Hans; de Jong, Anthonius J.M.

    2013-01-01

    Students often need support to optimize their learning in inquiry learning environments. In 2 studies, we investigated the effects of adding concept-map-based support to a simulation-based inquiry environment on kinematics. The concept map displayed the main domain concepts and their relations,